WorldWideScience

Sample records for binding deae-cellulose filter

  1. Biochemical studies of mouse brain tubulin: colchicine binding (DEAE-cellulose filter) assay and subunits ( α and β) biosynthesis and degradation (in newborn brain)

    Energy Technology Data Exchange (ETDEWEB)

    Tse, Cek-Fyne [Univ. of Rochester, NY (United States)

    1978-01-01

    A DEAE-cellulose filter assay, measuring (3H)colchicine bound to colchicine binding protein (CBP) absorbed on filter discs, has been modified to include lM sucrose in the incubation medium for complexing colchicine to CBP in samples before applying the samples to filter discs (single point assay). Due to the much greater stability of colchicine binding capacity in the presence of lM sucrose, multiple time-point assays and least squares linear regression analysis were not necessary for accurate determination of CBP in hybrid mouse brain at different stages of development. The highest concentrations of CBP were observed in the 160,000g supernatant and pellet of newborn brain homogenate. Further studies of the modified filter assay documented that the assay has an overall counting efficiency of 27.3%, that DEAE-cellulose filters bind and retain all tubulin in the assay samples, and that one molecule of colchicine binds approximately one molecule of tubulin dimer. Therefore, millimoles of colchicine bound per milligram total protein can be used to calculate tubulin content. With this technique tubulin content of brain supernatant was found to be 11.9% for newborn, and 7.15% for 11 month old mice. Quantitative densitometry was also used to measure mouse brain supernatant actin content for these two stages. In vivo synthesis and degradation rates of tubulin ..cap alpha.. and ..beta.. subunits of two day mouse brain 100,000g supernatant were studied after intracerebral injection of (3H)leucine. Quantitative changes of the ratio of tritium specific activities of tubulin ..cap alpha.. and ..beta.. subunits with time were determined. The pattern of change was biphasic. During the first phase the ratio decreased; during the second phase the ratio increased continuously. An interpretation consistent with all the data in this study is that the ..cap alpha.. subunit is synthesized at a more rapid rate than the ..beta.. subunit. (ERB)

  2. Separation of human hemoglobins by DEAE-cellulose chromatography using glycine-KCN-NaC1 developers.

    Science.gov (United States)

    Abraham, E C; Reese, A; Stallings, M; Huisman, T H

    This chromatographic procedure uses DEAE-cellulose as ion exchanger and glycine-KCN-NaC1 solutions as developers. Blood samples from several adults and newborn infants with alpha, beta, delta, or gamma chains variants have been analysed. The hemoglobins are eluted as compact and symmetrical zones, and the separation of many hemoglobin types is greatly improved. The procedure is relatively fast, simple, and inexpensive.

  3. A simple method to purify biologically and antigenically preserved bloodstream trypomastigotes of Trypanosoma cruzi using Deae-cellulose columns

    Directory of Open Access Journals (Sweden)

    Maria Auxiliadora de Sousa

    1983-09-01

    Full Text Available A method to purify trypanosomastigotes of some strains of Trypanosoma cruzi (Y, CL, FL, F, "Berenice", "Colombiana" and "São Felipe" from mouse blood by using DEAE-cellulose columns was standardized. This procedure is a modification of the Lanham & Godfrey methods and differs in some aspects from others described to purify T. cruzi bloodstream trypomastigotes, mainly by avoidance of prior purifications of parasites. By this method, the broad trypomastigotes were mainly isolated, accounting for higher recoveries obtained with strains having higher percentages of these forms: processing of infected blood from irradiated mice could be advantageous by increasing the recovery of parasites (percentage and/or total number and elution of more slender trypomastigotes. Trypomastigotes purified by this method presented normal morphology and motility, remained infective to triatomine bugs and mice, showing in the latter prepatent periods and courses parasitemia similar to those of control parasites, and also reproducing the polymorphism pattern of each strain. Their virulence and pathogenicity also remained considerably preserved, the latter property being evaluated by LD 50 tests, mortality rates and mean survival time of inoculated mice. Moreover, these parasites presented positive, clear and peripheral immunofluorescence reaction at titres similar to those of control organisms, thus suggesting important preservation of their surface antigens.Usando colunas de DEAE-cellulose foi padronizado um método para purificação de tripomastigotas de várias cepas de Trypanosoma cruzi (Y, CL, FL, F, "Berenice", "Columbiana" e "São Felipe" a partir do sangue de camundongos. Este método é uma modificação daqueles descritos por Lanham & Godfrey e difere em vários aspectos de outros descritos para purificar as formas sanguíneas deste parasita, particularmente na dispensa de pré-purificações. Por ele foram isolados principalmente os tripomastigotas largos

  4. A new method for extraction of iron-molybdenum cofactor (FeMoco) from nitrogenase adsorbed to DEAE-cellulose. 1. Effects of anions, cations, and preextraction treatments.

    Science.gov (United States)

    McLean, P A; Wink, D A; Chapman, S K; Hickman, A B; McKillop, D M; Orme-Johnson, W H

    1989-11-28

    A convenient and rapid method of obtaining the cofactor of nitrogenase (FeMoco) with a low and apparently limiting Fe/Mo ratio has been developed. FeMoco can be extracted from the MoFe protein bound to DEAE-cellulose. The cofactor is eluted in either N-methylformamide (NMF), N,N-dimethylformamide (DMF), or mixtures of these solvents by use of salts such as Et4NBr,Bu4NBr,Ph4PCl, and Ph4AsCl. The method is simple, is rapid (45 min), yields concentrated cofactor, and, unlike the original method [Shah, V. K., & Brill, W. J. (1977) Proc. Natl. Acad. Sci. U.S.A. 74, 3249-3253] which requires anaerobic centrifugation, is easily scaled up. Furthermore, it gives yields of cofactor in excess of 70%. Its disadvantages are a high Fe:Mo ratio when DMF is the extracting solvent and a high salt concentration in the resultant FeMoco solution. These disadvantages are easily overcome by removing excess Fe by pretreating the cofactor with bipyridyl while still on the column. This gives Fe:Mo ratios of (6 +/- 1):1 (11 trials) with specific activities ranging from 170 to 220 nmol of C2H4/[min.(nmol of Mo)]. Chromatography on Sephadex LH-20 removes ca. 99% of the excess salt. The adsorption of MoFe protein to DEAE-cellulose seems to facilitate denaturation by organic solvents so that pretreatment of the protein with acid, used in earlier methods, is unnecessary. There is an apparent dependence on the charge density of the anion employed for elution of FeMoco bound to DEAE-cellulose, such that Cl- greater than Br- much greater than I-, PF6- is the order of effectiveness of the Bu4N+ salts of these anions.(ABSTRACT TRUNCATED AT 250 WORDS)

  5. Isolation of Diverse Structural Compartments of Natural Organic Matter from the Kolyma River Watershed in East Siberian Arctic Using DEAE-Cellulose, XAD-8 Resin, C18 and PPL Cartridges

    Science.gov (United States)

    Andzhushev, M.; Dubinenkov, I.; Holmes, R. M.; Hatfield, K.; Perminova, I.; Bulygina, E. B.; Konstantinov, A.

    2011-12-01

    Natural Organic Matter (NOM) is an essential part of the global carbon cycle and plays a significant role in transport of organic carbon from terrestrial ecosystems into the World Ocean. The Arctic region is one of the most vulnerable with respect to climate change. The Kolyma River is one of the great Arctic Rivers. The particular feature of the Kolyma River watershed is its location in the continuous permafrost zone. Hence, research on structural composition of NOM in the Kolyma River basin is very important for understanding the carbon flux and NOM transformations on the way from permafrost to the Arctic Ocean under conditions of the changing climate. The purpose of this work was to isolate diverse structural compartments of NOM from permafrost mud streams and freshwater environments of the Kolyma River basin suited for further structural studies using a suite of different sorbents. Another goal was to assess applicability of these sorbents for developing a NOM fluxmeter - passive device for in situ measurement of fluxes. The following sorbents were used in this study: diethylaminoethyl (DEAE) cellulose , XAD-8 resin, Varian Bond Elute PPL and C18-cartridges. The choice of the sorbents was based on the following considerations. DEAE-cellulose is an anion-exchanging resin. It is suited the best for isolation of negatively charged NOM constituents of high and low molecular weight which represent the major part of freshwater NOM. Given positive charge inherent within the sorbent, sorption of negatively charged compartments from natural water occurs under flow through conditions without any prior treatment. This makes the DEAE cellulose very promising for in situ applications (e.g., for fluxmeter). Amberlite XAD-8 is a macroreticular resin which is used as a part of the standard protocol of International Humic Substances Society for isolation of freshwater humic substances (HS). The XAD-8 resin represents a neutral hydrophobic polymer. As a result, for isolation of

  6. Chromatofocusing in the purification and separation of apo- and holo-(vitamin D-binding protein).

    OpenAIRE

    Keenan, M J; Holmes, R. P.

    1985-01-01

    Chromatofocusing was used to purify the vitamin D-binding protein (DBP) from pig plasma in a procedure that consisted of an initial DEAE-cellulose chromatography followed by DEAE-Sephadex chromatography, with final purification by chromatofocusing. The protein was purified 184-fold over its concentration in plasma. When the plasma was labelled with a tracer concentration of [3H]calcidiol, it was apparent that holo- and apo-DBP did not co-chromatograph on chromatofocusing. The separation of th...

  7. Binding of (/sup 3/H)imipramine to human platelet membranes with compensation for saturable binding to filters and its implication for binding studies with brain membranes

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, O.M.; Wood, K.M.; Williams, D.C.

    1984-08-01

    Apparent specific binding of (/sup 3/H)imipramine to human platelet membranes at high concentrations of imipramine showed deviation from that expected of a single binding site, a result consistent with a low-affinity binding site. The deviation was due to displaceable, saturable binding to the glass fibre filters used in the assays. Imipramine, chloripramine, desipramine, and fluoxetine inhibited binding to filters whereas 5-hydroxytryptamine and ethanol were ineffective. Experimental conditions were developed that eliminated filter binding, allowing assay of high- and low-affinity binding to membranes. Failure to correct for filter binding may lead to overestimation of binding parameters, Bmax and KD for high-affinity binding to membranes, and may also be misinterpreted as indicating a low-affinity binding component in both platelet and brain membranes. Low-affinity binding (KD less than 2 microM) of imipramine to human platelet membranes was demonstrated and its significance discussed.

  8. Properties of Folate Binding Protein Purified from Cow’s Milk

    Directory of Open Access Journals (Sweden)

    SUBANDRATE

    2012-09-01

    Full Text Available Folic acid played an important role in the metabolism of the body. To measure the serum folic acid levels could use the folate binding protein (FBP from cow’s milk with a technique analogous to ELISA. The aims of this study were to identify characteristics of FBP from cow’s milk and binding capacity of FBP to folic acid and to purify FBP from other whey protein passed through DEAE-cellulose chromatography column. Each of DEAE-cellulose peaks was passed in affinity chromatography column. FBP was released from affinity column with sodium acetate buffer pH 3.5. The purity of obtained FBP was demonstrated by a single spot in SDS-PAGE analysis and the estimated molecular weight of FBP was around 31 kDa. Our study indicated that 1 mol FBP bound 1 mol folic acid. Alkylation with iodoacetic acid decreased the binding capacity of FBP which suggested the presence of a–SH or imidazol group in its active site. The importance of disulfide bridge was proven by decreasing of folate binding capacity of FBP after -mercaptoethanol treatment. In contrary, the folate binding didn need Ca2+ ion, as indicated by EDTA test which gave the same result as control.

  9. Analysis of single particle diffusion with transient binding using particle filtering.

    Science.gov (United States)

    Bernstein, Jason; Fricks, John

    2016-07-21

    Diffusion with transient binding occurs in a variety of biophysical processes, including movement of transmembrane proteins, T cell adhesion, and caging in colloidal fluids. We model diffusion with transient binding as a Brownian particle undergoing Markovian switching between free diffusion when unbound and diffusion in a quadratic potential centered around a binding site when bound. Assuming the binding site is the last position of the particle in the unbound state and Gaussian observational error obscures the true position of the particle, we use particle filtering to predict when the particle is bound and to locate the binding sites. Maximum likelihood estimators of diffusion coefficients, state transition probabilities, and the spring constant in the bound state are computed with a stochastic Expectation-Maximization (EM) algorithm.

  10. Filter transfer of genomic libraries in a state accessible to DNA-binding proteins.

    Science.gov (United States)

    Beebee, T J

    1987-04-01

    I have developed a method for transferring plaque DNA of lambda genomic libraries onto 3MM filters in a state accessible to DNA-binding proteins. DNA bound to 3MM is available to proteins as large as Escherichia coli RNA polymerase and maintains template activity similar to that in free solution. Lambda Plaques can be lifted onto 3MM filter disks, deproteinized, and used for transcription assays in vitro. The RNA synthesized is complementary to phage rather than to E. coli DNA and plaques can be identified by autoradiography. Furthermore, the filters can subsequently be probed with radioactive nucleic acids under standard hybridization conditions. Finally, colorimetric assays can be employed with lactate dehydrogenase (LDH) A in which plaques are identified by the localized reduction of nitroblue tetrazolium.

  11. Chromatofocusing in the purification and separation of apo- and holo-(vitamin D-binding protein).

    Science.gov (United States)

    Keenan, M J; Holmes, R P

    1985-08-01

    Chromatofocusing was used to purify the vitamin D-binding protein (DBP) from pig plasma in a procedure that consisted of an initial DEAE-cellulose chromatography followed by DEAE-Sephadex chromatography, with final purification by chromatofocusing. The protein was purified 184-fold over its concentration in plasma. When the plasma was labelled with a tracer concentration of [3H]calcidiol, it was apparent that holo- and apo-DBP did not co-chromatograph on chromatofocusing. The separation of these two forms of DBP on chromatofocusing was verified by using purified apo-DBP mixed with either a tracer or a saturating concentration of calcidiol. This separation was consistent with differences observed in their isoelectric points. The ability to separate apo and holo forms of DBP should permit the study of their specific interactions with other binding proteins and help determine the physiological relevance of these interactions.

  12. Identification and molecular characterisation of a biotin-binding protein distinct from avidin of chicken egg white and comparison with yolk biotin-binding protein.

    Science.gov (United States)

    Seshagiri, P B; Adiga, P R

    1987-12-07

    By immunological and biochemical methods a biotin-binding protein, distinct from avidin, has been shown to be present in chicken egg white. This vitamin-binding protein (Mr 67,000) bound [14C]biotin, displayed thermally induced biotin exchange reaction and exhibited gross immunological cross-reactivity with the purified yolk biotin-binding protein. In vitro labelling of soluble proteins with radioactive amino acids in the oviduct tissue explants from estrogenised chicks revealed that approx. 2% of the total radioactive proteins was immunoprecipitated with anti-yolk biotin-binding protein antibodies. The protein could be purified to homogeneity by employing ion-exchange chromatography on DEAE-cellulose and biotin-AH Sepharose affinity chromatography. The purified protein specifically bound [14C]biotin, and exhibited complete immunological homology with the yolk biotin-binding protein but not with avidin. Its electrophoretic mobility (at pH 8.3), acidic nature, biotin-binding characteristics, immunological cross-reactivity and tryptic peptide maps were very similar to that of yolk biotin-binding protein, and not avidin.

  13. A rapid and simple assay for growth hormone-binding protein activity in human plasma.

    Science.gov (United States)

    Baumann, G; Shaw, M A; Amburn, K

    1988-12-01

    The newly discovered circulating growth hormone binding proteins dictate a re-evaluation of the state of GH in plasma in health and disease as the binding proteins are known to affect GH metabolism and action. We describe a rapid and simple GH-binding assay that allows determination of free and complexed plasma GH, as well as GH-binding protein activity as an index of GH-binding protein levels, with relative ease. The method is based on incubation of plasma with 125I-GH and separation of bound from free GH on small DEAE-cellulose columns; it can be used on a large scale for routine determinations. The results obtained by this method are comparable to those obtained with the previously used slow and more cumbersome gel filtration technique. Initial data obtained in normal subjects and certain disease states show that the bound fraction of plasma GH is similar in men, women and children, is unaffected by pregnancy or acute infection, but is marginally decreased in liver cirrhosis. In acromegaly, binding protein activity also appears normal when allowance is made for partial saturation of the binding proteins by the high prevailing GH levels. The technique we describe should facilitate investigations of normal and abnormal regulation of the GH binding proteins.

  14. A filter microplate assay for quantitative analysis of DNA binding proteins using fluorescent DNA.

    Science.gov (United States)

    Yang, William C; Swartz, James R

    2011-08-15

    We present a rapid method for quantifying the apparent DNA binding affinity and capacity of recombinant transcription factors (TFs). We capture His6-tagged TFs using nickel-nitrilotriacetic acid (Ni-NTA) agarose and incubate the immobilized TFs with fluorescently labeled cognate DNA probes. After washing, the strength of the fluorescence signal indicates the extent of DNA binding. The assay was validated using two pluripotency-regulating TFs: SOX2 and NANOG. Using competitive binding analysis with nonlabeled competitor DNA, we show that SOX2 and NANOG specifically bind to their consensus sequences. We also determined the apparent affinity of SOX2 and NANOG for their consensus sequences to be 54.2±9 and 44.0±6nM, respectively, in approximate agreement with literature values. Our assay does not require radioactivity, but radioactively labeling the TFs enables the measurement of absolute amounts of immobilized SOX2 and NANOG and, hence, a DNA-to-protein binding ratio. SOX2 possesses a 0.95 DNA-to-protein binding ratio, whereas NANOG possesses a 0.44 ratio, suggesting that most of the SOX2 and approximately half of the NANOG are competent for DNA binding. Alternatively, the NANOG dimer may be capable of binding only one DNA target. This flexible DNA binding assay enables the analysis of crude or purified samples with or without radioactivity.

  15. Identification of the Chloramphenicol-Binding Protein in Escherichia coli Ribosomes by Partial Reconstitution*

    Science.gov (United States)

    Nierhaus, Dagmar; Nierhaus, Knud H.

    1973-01-01

    50S-derived cores were prepared by treatment of 50S subunits with 0.4 M Licl (0.4c core) and 0.8 M Licl (0.8c core), respectively. 0.4c cores bind chloramphenicol whereas 0.8c cores do not. The split proteins obtained during the transitions 0.4c → 0.8c were separated by DEAE-cellulose chromatography and Sephadex G-100 gel filtration. Reconstitution experiments with the fractionated proteins demonstrated that protein L16 is involved in chloramphenicol binding. In contrast to chloramphenicol, the CACCA-(N-acetyl-leucyl) fragment is bound by the 0.8c core, i.e., this core contains the intact p-site moiety of the peptidyltransferase center. Puromycin can inhibit chloramphenicol binding completely. In the concentration range tested (up to 20 mM) the trinucleotide CCA inhibits chloramphenicol binding as effectively as puromycin, whereas an aminoacid mixture shows no inhibition. It is concluded that chloramphenicol acts exclusively on the a-site part of the peptidyltransferase center interfering with the binding of the last two or three nucleotides (3′ end) of aminoacyl-tRNA. Images PMID:4365366

  16. Identification of the chloramphenicol-binding protein in Escherichia coli ribosomes by partial reconstitution.

    Science.gov (United States)

    Nierhaus, D; Nierhaus, K H

    1973-08-01

    50S-derived cores were prepared by treatment of 50S subunits with 0.4 M Licl (0.4c core) and 0.8 M Licl (0.8c core), respectively. 0.4c cores bind chloramphenicol whereas 0.8c cores do not. The split proteins obtained during the transitions 0.4c --> 0.8c were separated by DEAE-cellulose chromatography and Sephadex G-100 gel filtration. Reconstitution experiments with the fractionated proteins demonstrated that protein L16 is involved in chloramphenicol binding. In contrast to chloramphenicol, the CACCA-(N-acetyl-leucyl) fragment is bound by the 0.8c core, i.e., this core contains the intact p-site moiety of the peptidyltransferase center. Puromycin can inhibit chloramphenicol binding completely. In the concentration range tested (up to 20 mM) the trinucleotide CCA inhibits chloramphenicol binding as effectively as puromycin, whereas an aminoacid mixture shows no inhibition. It is concluded that chloramphenicol acts exclusively on the a-site part of the peptidyltransferase center interfering with the binding of the last two or three nucleotides (3' end) of aminoacyl-tRNA.

  17. Fractionation of rat IgG subclasses and screening for IgG Fc-binding to bacteria.

    Science.gov (United States)

    Nilsson, R; Myhre, E; Kronvall, G; Sjögren, H O

    1982-01-01

    The four IgG subclasses of the rat, IgGl, IgG2a, IgG2b and IgG2c, were purified from normal serum by a combination of protein A-affinity chromatography and DEAE-cellulose chromatography. Purified, radiolabelled preparations of IgG were tested for binding to Gram-positive bacteria representing five different Fc-receptor (FcR) types. Distinct rat subclass-specific Fc-binding was noted to bacterial species belonging to different Fc-receptor types. Staphylococcus aureus (FcR I) strains bind IgGl and IgG2c as shown by others. Group C and G Streptococci (FcR III) bind all four subclasses of rat IgG. Streptococcus zooepidemicus strains (FcR V) also bind all four subclases but only to a lower degree. Human group A Streptococci (FcR II) and bovine group G Streptococci (FcR IV) do not bind any of the rat IgG subclasses. Elution studies on two strains. Staphylococcus aureus, Cowan I, and human group G Streptococcus, G 148, showed that both thiocyanate and pH-elution might be useful for the fractionation of IgG subclasses bound to bacterial cells. The present work indicates the possible use of bacterial cells as solid-phase absorbents in immunological studies of rat IgG.

  18. K2P2.1 (TREK-1)–activator complexes reveal a cryptic selectivity filter binding site

    Energy Technology Data Exchange (ETDEWEB)

    Lolicato, Marco; Arrigoni, Cristina; Mori, Takahiro; Sekioka, Yoko; Bryant, Clifford; Clark, Kimberly A.; Minor, Jr , Daniel L. (Ono); (UCSF)

    2017-07-10

    Polymodal thermo- and mechanosensitive two-pore domain potassium (K2P) channels of the TREK1 subfamily generate ‘leak’ currents that regulate neuronal excitability, respond to lipids, temperature and mechanical stretch, and influence pain, temperature perception and anaesthetic responses1, 2, 3. These dimeric voltage-gated ion channel (VGIC) superfamily members have a unique topology comprising two pore-forming regions per subunit4, 5, 6. In contrast to other potassium channels, K2P channels use a selectivity filter ‘C-type’ gate7, 8, 9, 10 as the principal gating site. Despite recent advances3, 11, 12, poor pharmacological profiles of K2P channels limit mechanistic and biological studies. Here we describe a class of small-molecule TREK activators that directly stimulate the C-type gate by acting as molecular wedges that restrict interdomain interface movement behind the selectivity filter. Structures of K2P2.1 (also known as TREK-1) alone and with two selective K2P2.1 (TREK-1) and K2P10.1 (TREK-2) activators—an N-aryl-sulfonamide, ML335, and a thiophene-carboxamide, ML402—define a cryptic binding pocket unlike other ion channel small-molecule binding sites and, together with functional studies, identify a cation–π interaction that controls selectivity. Together, our data reveal a druggable K2P site that stabilizes the C-type gate ‘leak mode’ and provide direct evidence for K2P selectivity filter gating.

  19. Isolation and Purification of Thiamine Binding Protein from Mung Bean

    Directory of Open Access Journals (Sweden)

    MOHAMAD SADIKIN

    2013-03-01

    Full Text Available Thiamine has fundamental role in energy metabolism. The organs mostly sensitive to the lack of thiamine levels in the body are the nervous system and the heart. Thiamine deficiency causes symptoms of polyneuritis and cardiovascular diseases. Because of its importance in the metabolism of carbohydrates, we need to measure the levels of thiamine in the body fluids by using an easy and inexpensive way without compromising the sensitivity and selectivity. An option to it is thiamine measurement based on the principle of which is analogous to ELISA, in which a thiamine binding protein (TBP act by replacing antibodies. The presence of TBP in several seeds have been reported by previous researchers, but the presence of TBP in mung beans has not been studied. This study was aimed to isolate and purify TBP from mung bean. The protein was isolated from mung bean through salting out by ammonium sulphate of 40, 70, and 90% (w/v. TBP has a negative charge as shown by cellulose acetate electrophoresis. The result obtained after salting out by ammonium sulphate was further purified bymeans of DEAE-cellulose chromatography and affinity chromatography. In precipitation of 90% of salting out method, one peak protein was obtained by using affinity chromatography. The protein was analyzed by SDS PAGE electrophoresis. The result of SDS PAGE electrophoresis showed that TBP has a molecular weight of 72.63 kDa.

  20. Comparison of humic substances isolated from peatbog water by sorption on DEAE-cellulose and amberlite XAD-2

    Science.gov (United States)

    Hejzlar, J.; Szpakowska, B.; Wershaw, R. L.

    1994-01-01

    Aquatic humic substances (AHS) were isolated from peatbog water by adsorption (1) on diethylaminoethyl cellulose (DEAE-C) and (2) on Amberlite XAD-2 (XAD) to compare yields of the methods and the composition of the isolated AHS. To provide a detailed comparison, the isolates were fractionated using size-exclusion and hydrophobic-interaction chromatography on Sephadex G-50. The fractions were characterized by ultraviolet-visible, infrared and 13C-nuclear magnetic spectroscopies and analyzed for elemental, functional-group, carbohydrate and amino acid compositions. More AHS adsorbed onto DEAE-C than onto XAD-2 (94 and 74%, respectively). However, only 76% of the AHS adsorbed onto DEAE-C was recovered using 0.1 M NaOH, whereas 98% of the AHS adsorbed onto XAD was released by consecutive elution with 1 M NH4OH (91%) and methanol (7%). Four main fractions of different composition were obtained from each of the alkali-desorbed AHS samples by Sephadex-gel chromatography. General agreement was found in relative amounts, spectroscopic characteristics and composition of corresponding fractions of both isolates except nitrogen content, which was significantly higher in AHS isolated with XAD, apparently due to the reaction of AHS with NH4OH used for the desorption from the resin.Aquatic humic substances (AHS) were isolated from peatbog water by adsorption (1) on diethylaminoethyl cellulose (DEAE-C) and (2) on Amberlite XAD-2 (XAD) to compare yields of the methods and the composition of the isolated AHS. To provide a detailed comparison, the isolates were fractionated using size-exclusion and hydrophobic-interaction chromatography on Sephadex G-50. The fractions were characterized by ultraviolet-visible, infrared and 13C-nuclear magnetic spectroscopies and analyzed for elemental, functional-group, carbohydrate and amino acid compositions. More AHS adsorbed onto DEAE-C than onto XAD-2 (94 and 74%, respectively). However, only 76% of the AHS adsorbed onto DEAE-C was recovered using 0.1 M NaOH, whereas 98% of the AHS adsorbed onto XAD was released by consecutive elution with 1 M NH4OH (91%) and methanol (7%). Four main fractions of different composition were obtained from each of the alkali-desorbed AHS samples by Sephadex-gel chromatography. General agreement was found in relative amounts, spectroscopic characteristics and composition of corresponding fractions of both isolates except nitrogen content, which was significantly higher in AHS isolated with XAD, apparently due to the reaction of AHS with NH4OH used for the desorption from the resin.

  1. Quantitative immunobinding assay for vitamin D-dependent calcium-binding protein (calbindin-D28k) using nitrocellulose filters

    Energy Technology Data Exchange (ETDEWEB)

    Varghese, S.; Christakos, S.

    1987-08-15

    A sensitive dot immunobinding assay has been developed for the quantitative determination of vitamin D-dependent calcium-binding protein (calbindin-D28k; CaBP) in rat and human kidney and brain. Protein samples are spotted onto nitrocellulose sheets, fixed, and then rinsed with Tris-buffered saline. The remaining protein binding sites are blocked with bovine serum albumin, gelatin, or nonfat dry milk protein and the filters are then incubated sequentially with antiserum to calbindin-D28k (1:500 dilution) and /sup 125/I-protein A (200,000 cpm/ml). After washing, the radioactivity bound to each sample is quantitated by counting in a gamma counter. The sensitivity of the assay is such that 10 ng calbindin-D28k can be accurately quantitated. The highest levels of CaBP were detected in kidney (7.8 +/- 0.5 micrograms/mg protein) and cerebellum (22.1 +/- 1.4 micrograms/mg protein). Ten micrograms calmodulin, lactalbumin, or parvalbumin and 100 micrograms liver extract showed no reactivity in the assay. The assay is precise (intraassay variability, 4.0%) and reproducible (interassay variability, 8.8%). There was good agreement between the data in this assay and the data we obtained using radioimmunoassay (RIA). The assay has several advantages over the RIA. Iodination of pure antigen is not required and it is possible to detect membrane-bound and insoluble antigens using this assay. Also, the antiserum and /sup 125/I-protein A solutions can be saved and reused. This assay represents a major modification of the original immunobinding assays which used the less sensitive peroxidase stain. It is also an improvement over previous /sup 125/I immunobinding assays which were not quantitative but were used as antigen spot tests or which required iodination of the antibody.

  2. Purification and Characterization of Cyclic AMP-Binding Protein from Ganoderma lucidum

    Institute of Scientific and Technical Information of China (English)

    WANG Qi; KIM Jung-Sik; CHUNG Ki-Chul

    2004-01-01

    Cyclic AMP-binding protein was purified 30 fold from the mycelia of Ganoderma lucidum by the methods of ammonium sulfate precipitation, DEAE-cellulose, phospho-cellulose ion exchange chromatography and Sephacryl S-100 gel filtration. The molecular mass of the purified protein is 34.5 kDa and 17 kDa by Sephacryl S-100 gel filtration and SDS-ployacrylamide gel electrophoresis, respectively. From these results it is suggested that the protein has a homometric dimmer structure. The pI of the purified protein is pH 8. 2 by native isoelectric focusing gel. The half-life of the protein activity in 10% glycerol at 4 ℃ is 7 d in crude extract, but its half-life is only 3 d under purifying conditions. The optimal conditions of the protein activity are at 1 ℃ and pH 7. 5. Its activity is increased 6 times by 1 mmol/L Zn2+ and is slightly inhibited by cGMP,Cu2+ and Mn2+.

  3. Purification of a Ni sup 2+ -binding protein, pNiXa, from Xenopus ovary

    Energy Technology Data Exchange (ETDEWEB)

    Beck, B.L.; Makowski, G.S.; Nomoto, S.; Sunderman, F.W. (Univ. of Connecticut, Farmington (United States))

    1991-03-11

    Previous research on nickel-induced teratogenesis in Xenopus laevis identified several Ni{sup 2+}-binding proteins, including pNiXa in Xenopus ovaries, unfertilized eggs, and embryos. A major goal of this research project is elucidating the role of pNiXa in the uptake, embryotoxicity, and teratogenicity of Ni{sup 2+} in Xenopus. To purify and identify pNiXa, ovarian tissue from mature Xenopus females was homogenized in 3 vol of Tris buffer and centrifuged. The supernatant was centrifuged; the ultracentrifugal supernatant was batch-adsorbed onto DEAE-cellulose. The pNiSa remained unbound and was subsequently adsorbed on phosphocellulose and eluted by a step-wise NaCl gradient. The pNiXa was eluted in 0.25 M NaCl; this fraction was concentrated, and further purified by reverse phase chromatography on a 5 {mu}m C-8 column, with a linear trifluoroacetic acid/acetonitrile gradient. The pNiXa was eluted at {approximately}56% acetonitrile, yielding a single protein band with mol wt {approximately}47 kD,based on SDS-PAGE analysis. Comparison of the amino acid composition of pNiXa versus the results obtained by automated Edman degradation indicated that the N-terminus of pNiXa was blocked. Sequencing of peptide fragments of pNiXa is underway.

  4. Polysaccharide structural features that are critical for the binding of sulfated fucans to bindin, the adhesive protein from sea urchin sperm.

    Science.gov (United States)

    DeAngelis, P L; Glabe, C G

    1987-10-15

    We have investigated the structural features of sulfated fucose-containing polysaccharides which are responsible for their selective binding to Strongylocentrotus purpuratus bindin. The data presented demonstrate that the sulfate esters and a molecular weight in excess of approximately 15,000 are required for high affinity binding of the fucans to bindin. Desulfation destroys the binding activity of the fucans, which can be fully restored by chemical resulfation. Fucan fragments of an average molecular weight of 15,000 were nearly as active as the starting material (Mr 10(6)). The observed IC50 value for fragments of Mr congruent to 10,000 and Mr congruent to 5,000 were 1 and 2 orders of magnitude higher, respectively. The binding of fucoidan to bindin is stable in high salt (50% at 1.2 M NaCl) whereas the binding of fucoidan to DEAE-cellulose or polylysine is inhibited by the concentrations of salt normally found in sea water (50% at 0.2 and 0.5 M NaCl, respectively). This result suggests that the binding mechanism is not a simple ionic interaction and that hydrogen bonding and cooperativity may also be important determinants of the binding mechanism. We also found that polyvinyl sulfate binds to bindin with high affinity and inhibits the bindin-mediated agglutination of sea urchin eggs. The results of these investigations suggest that the spatial orientation of the sulfate esters plays a critical role in determining the selectivity of sulfated polysaccharide binding and that the polysaccharide backbone does not play a direct role in the binding mechanism.

  5. Immunological properties of prolactin and studies on a gonadotropin binding inhibitor

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.S.

    1985-01-01

    The physiological role of prolactin in horses has not yet been well defined. With the availability of highly purified ePRL for inducing antibody formation in rabbits and for radiolabeling with Na/sup 125/I, a very sensitive (0.4-0.6 ng/ml) and highly specific homologous RIA for ePRL was developed. A heterologous RIA using /sup 125/I-labeled ovine PRL and anti-ePRL antiserum was also developed and compared to the homologous RIA for ePRL. Of the two systems, it is concluded that this homologous RIA system is more suitable and more reliable for measuring prolactin concentration in horse serum samples. Until now, biochemical information on PRL has not been available for reptilian species. Sea turtle (Chelonia mydas) prolactin was purified from pituitary extracts by selective precipitation, DEAE-cellulose chromatography and gel filtration. Similar to other species of PRL, sea turtle PRL is a 22,000-24,000 daltons protein and contains a high content of glutamic acid, aspartic acid, serine and leucine, the N-terminal amino acid residue. Gonadotropin (FSH) binding inhibitor was partially purified from sheep testes by ammonium sulfate fractionation and ion exchange chromatography. The FSH-BI (molecular weight: 50,000 daltons, estimated by gel filtration) contains a protein moiety necessary for binding inhibitory activity. The inhibition of the binding of /sup 125/I-labeled ovine FSH to its receptor by the FSH-BI is not competitive. Both in vivo and in vitro biological studies of FSH-BI preparations in rats indicated various effects on FSH and LH activities at the gonadal level. These findings suggest a physiological role for FSH-BI in the regulation of reproduction.

  6. Filter arrays

    Energy Technology Data Exchange (ETDEWEB)

    Page, Ralph H.; Doty, Patrick F.

    2017-08-01

    The various technologies presented herein relate to a tiled filter array that can be used in connection with performance of spatial sampling of optical signals. The filter array comprises filter tiles, wherein a first plurality of filter tiles are formed from a first material, the first material being configured such that only photons having wavelengths in a first wavelength band pass therethrough. A second plurality of filter tiles is formed from a second material, the second material being configured such that only photons having wavelengths in a second wavelength band pass therethrough. The first plurality of filter tiles and the second plurality of filter tiles can be interspersed to form the filter array comprising an alternating arrangement of first filter tiles and second filter tiles.

  7. Immobilization of the α-amylase of Bacillus amyloliquifaciens TSWK1-1 for the improved biocatalytic properties and solvent tolerance.

    Science.gov (United States)

    Kikani, B A; Pandey, S; Singh, S P

    2013-05-01

    The α-amylase of Bacillus amyloliquifaciens TSWK1-1 (GenBank Number, GQ121033) was immobilized by various methods, including ionic binding with DEAE cellulose, covalent coupling with gelatin and entrapment in polyacrylamide and agar. The immobilization of the purified enzyme was most effective with the DEAE cellulose followed by gelatin, agar and polyacrylamide. The K m increased, while V max decreased upon immobilization on various supports. The temperature and pH profiles broadened, while thermostability and pH stability enhanced after immobilization. The immobilized enzyme exhibited greater activity in various non-ionic surfactants, such as Tween-20, Tween-80 and Triton X-100 and ionic surfactant, SDS. Similarly, the enhanced stability of the immobilized α-amylase in various organic solvents was among the attractive features of the study. The reusability of the immobilized enzyme in terms of operational stability was assessed. The DEAE cellulose immobilized α-amylase retained its initial activity even after 20 consequent cycles. The DEAE cellulose immobilized enzyme hydrolyzed starch with 27 % of efficiency. In summary, the immobilization of B. amyloliquifaciens TSWK1-1 α-amylase with DEAE cellulose appeared most suitable for the improved biocatalytic properties and stability.

  8. Optimal filtering

    CERN Document Server

    Anderson, Brian D O

    2005-01-01

    This graduate-level text augments and extends beyond undergraduate studies of signal processing, particularly in regard to communication systems and digital filtering theory. Vital for students in the fields of control and communications, its contents are also relevant to students in such diverse areas as statistics, economics, bioengineering, and operations research.Topics include filtering, linear systems, and estimation; the discrete-time Kalman filter; time-invariant filters; properties of Kalman filters; computational aspects; and smoothing of discrete-time signals. Additional subjects e

  9. Ultraviolet filters.

    Science.gov (United States)

    Shaath, Nadim A

    2010-04-01

    The chemistry, photostability and mechanism of action of ultraviolet filters are reviewed. The worldwide regulatory status of the 55 approved ultraviolet filters and their optical properties are documented. The photostabilty of butyl methoxydibenzoyl methane (avobenzone) is considered and methods to stabilize it in cosmetic formulations are presented.

  10. Food Filter

    Institute of Scientific and Technical Information of China (English)

    履之

    1995-01-01

    A typical food-processing plant produces about 500,000 gallons of waste water daily. Laden with organic compounds, this water usually is evaporated or discharged into sewers.A better solution is to filter the water through

  11. Generalised Filtering

    Directory of Open Access Journals (Sweden)

    Karl Friston

    2010-01-01

    Full Text Available We describe a Bayesian filtering scheme for nonlinear state-space models in continuous time. This scheme is called Generalised Filtering and furnishes posterior (conditional densities on hidden states and unknown parameters generating observed data. Crucially, the scheme operates online, assimilating data to optimize the conditional density on time-varying states and time-invariant parameters. In contrast to Kalman and Particle smoothing, Generalised Filtering does not require a backwards pass. In contrast to variational schemes, it does not assume conditional independence between the states and parameters. Generalised Filtering optimises the conditional density with respect to a free-energy bound on the model's log-evidence. This optimisation uses the generalised motion of hidden states and parameters, under the prior assumption that the motion of the parameters is small. We describe the scheme, present comparative evaluations with a fixed-form variational version, and conclude with an illustrative application to a nonlinear state-space model of brain imaging time-series.

  12. Notch filter

    Science.gov (United States)

    Shelton, G. B. (Inventor)

    1977-01-01

    A notch filter for the selective attenuation of a narrow band of frequencies out of a larger band was developed. A helical resonator is connected to an input circuit and an output circuit through discrete and equal capacitors, and a resistor is connected between the input and the output circuits.

  13. ISOLATION OF TRYPANOSOMA MONOPTERI USING PERCOLL REAGENT AND DEAE-CELLULOSE%用Percoll试剂和DEAE-纤维素层析柱分离纯化鳝锥虫

    Institute of Scientific and Technical Information of China (English)

    顾泽茂; 汪建国; 章晋勇; 龚小宁

    2006-01-01

    用51%的Percoll分离液和DEAE-纤维素层析柱,从自然感染的黄鳝(Monopterus albus Zuiew)中分离鳝锥虫(Trypanosoma monopteri Chen et Hsieh,1964).对含虫血液样品分别以2.1×103 r/min、2.5×103 r/min、2.9×103 r/min、3.3×103 r/min、3.6×103r/min离心5、10、15、20min,观察红细胞的去除和鳝锥虫存留百分数,结果表明:2.9×103r/min离心15min分离效果最佳.离心分离的混悬液含有锥虫、白细胞、血栓细胞和极少的红细胞,悬混液再经DEAE-纤维素过柱,得到纯净的鳝锥虫.过柱后光学显微镜观察,锥虫形态正常,运动活泼,无血细胞.本方法具有耗时短、回收率高的特点,是把梯度分离和离子交换结合在一起的一种快速有效方法,为鳝锥虫的进一步研究奠定了基础.另外,此方法还可以作为快速、准确检测自然状态下黄鳝是否感染锥虫的手段,为鳝锥虫的流行病学研究提供可靠的数据.

  14. A new method for extraction of iron-molybdenum cofactor (FeMoco) from nitrogenase adsorbed to DEAE-cellulose. 2. Solubilization of FeMoco in a wide range of organic solvents.

    Science.gov (United States)

    Wink, D A; McLean, P A; Hickman, A B; Orme-Johnson, W H

    1989-11-28

    While the iron-molybdenum cofactor (FeMoco) of nitrogenase, a constituent of the active site for nitrogen reduction, can be extracted into N-methylformamide (NMF) and pyrrollidinone, the inability to solubilize it in any other organic solvents has hampered further understanding of its structure and chemical properties. A method to solubilize FeMoco, prepared in N,N-dimethylformamide (DMF) with Bu4N+ as counterion [McLean, P. A., Wink, D. A., Chapman, S. K., Hickman, A. B., McKillop, D. M., & Orme-Johnson, W. H. (1989) Biochemistry (preceding paper in this issue)], in acetonitrile, acetone, methylene chloride, tetrahydrofuran, and benzene is reported. FeMoco evaporated to dryness in vacuo dissolves readily in good yield (55-100%) and with no significant loss in specific activity. In addition, FeMoco can be extracted directly into these solvents from MoFe protein bound to a DEAE-Sepharose column if the protein is pretreated with DMF. Methods have also been developed to extract fully active FeMoco into acetone and acetonitrile in the absence of any amide solvents (NMF or DMF). Extraction of FeMoco into acetone (30% yield) involves only pretreatment of column-bound protein with methanol, while extraction into acetonitrile (22% yield) requires pretreatment with methanol followed by THF. We conclude that the presence of a suitable soluble cation confers solubility to the cofactor in many common organic solvents and that the solubility of FeMoco in a given solvent may be independent of the ability of that solvent to extract the cofactor from column-bound protein.

  15. CRYSTAL FILTER TEST SET

    Science.gov (United States)

    CRYSTAL FILTERS, *HIGH FREQUENCY, *RADIOFREQUENCY FILTERS, AMPLIFIERS, ELECTRIC POTENTIAL, FREQUENCY, IMPEDANCE MATCHING , INSTRUMENTATION, RADIOFREQUENCY, RADIOFREQUENCY AMPLIFIERS, TEST EQUIPMENT, TEST METHODS

  16. Digital filters

    CERN Document Server

    Hamming, Richard W

    1997-01-01

    Digital signals occur in an increasing number of applications: in telephone communications; in radio, television, and stereo sound systems; and in spacecraft transmissions, to name just a few. This introductory text examines digital filtering, the processes of smoothing, predicting, differentiating, integrating, and separating signals, as well as the removal of noise from a signal. The processes bear particular relevance to computer applications, one of the focuses of this book.Readers will find Hamming's analysis accessible and engaging, in recognition of the fact that many people with the s

  17. Convergent Filter Bases

    OpenAIRE

    Coghetto Roland

    2015-01-01

    We are inspired by the work of Henri Cartan [16], Bourbaki [10] (TG. I Filtres) and Claude Wagschal [34]. We define the base of filter, image filter, convergent filter bases, limit filter and the filter base of tails (fr: filtre des sections).

  18. Convergent Filter Bases

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2015-09-01

    Full Text Available We are inspired by the work of Henri Cartan [16], Bourbaki [10] (TG. I Filtres and Claude Wagschal [34]. We define the base of filter, image filter, convergent filter bases, limit filter and the filter base of tails (fr: filtre des sections.

  19. NOVEL MICROWAVE FILTER DESIGN TECHNIQUES.

    Science.gov (United States)

    ELECTROMAGNETIC WAVE FILTERS, MICROWAVE FREQUENCY, PHASE SHIFT CIRCUITS, BANDPASS FILTERS, TUNED CIRCUITS, NETWORKS, IMPEDANCE MATCHING , LOW PASS FILTERS, MULTIPLEXING, MICROWAVE EQUIPMENT, WAVEGUIDE FILTERS, WAVEGUIDE COUPLERS.

  20. Miniaturized dielectric waveguide filters

    Science.gov (United States)

    Sandhu, Muhammad Y.; Hunter, Ian C.

    2016-10-01

    Design techniques for a new class of integrated monolithic high-permittivity ceramic waveguide filters are presented. These filters enable a size reduction of 50% compared to air-filled transverse electromagnetic filters with the same unloaded Q-factor. Designs for Chebyshev and asymmetric generalised Chebyshev filter and a diplexer are presented with experimental results for an 1800 MHz Chebyshev filter and a 1700 MHz generalised Chebyshev filter showing excellent agreement with theory.

  1. Filter quality of pleated filter cartridges.

    Science.gov (United States)

    Chen, Chun-Wan; Huang, Sheng-Hsiu; Chiang, Che-Ming; Hsiao, Ta-Chih; Chen, Chih-Chieh

    2008-04-01

    The performance of dust cartridge filters commonly used in dust masks and in room ventilation depends both on the collection efficiency of the filter material and the pressure drop across the filter. Currently, the optimization of filter design is based only on minimizing the pressure drop at a set velocity chosen by the manufacturer. The collection efficiency, an equally important factor, is rarely considered in the optimization process. In this work, a filter quality factor, which combines the collection efficiency and the pressure drop, is used as the optimization criterion for filter evaluation. Most respirator manufacturers pleat the filter to various extents to increase the filtration area in the limit space within the dust cartridge. Six sizes of filter holders were fabricated to hold just one pleat of filter, simulating six different pleat counts, ranging from 0.5 to 3.33 pleats cm(-1). The possible electrostatic charges on the filter were removed by dipping in isopropyl alcohol, and the air velocity is fixed at 100 cm s(-1). Liquid dicotylphthalate particles generated by a constant output atomizer were used as challenge aerosols to minimize particle loading effects. A scanning mobility particle sizer was used to measure the challenge aerosol number concentrations and size distributions upstream and downstream of the pleated filter. The pressure drop across the filter was monitored by using a calibrated pressure transducer. The results showed that the performance of pleated filters depend not only on the size of the particle but also on the pleat count of the pleated filter. Based on filter quality factor, the optimal pleat count (OPC) is always higher than that based on pressure drop by about 0.3-0.5 pleats cm(-1). For example, the OPC is 2.15 pleats cm(-1) from the standpoint of pressure drop, but for the highest filter quality factor, the pleated filter needed to have a pleat count of 2.65 pleats cm(-1) at particle diameter of 122 nm. From the aspect of

  2. Composing morphological filters

    NARCIS (Netherlands)

    H.J.A.M. Heijmans (Henk)

    1995-01-01

    textabstractA morphological filter is an operator on a complete lattice which is increasing and idempotent. Two well-known classes of morphological filters are openings and closings. Furthermore, an interesting class of filters, the alternating sequential filters, is obtained if one composes openin

  3. Composing morphological filters

    NARCIS (Netherlands)

    Heijmans, H.J.A.M.

    1995-01-01

    A morphological filter is an operator on a complete lattice which is increasing and idempotent. Two well-known classes of morphological filters are openings and closings. Furthermore, an interesting class of filters, the alternating sequential filters, is obtained if one composes openings and closi

  4. Passive Power Filters

    CERN Document Server

    Künzi, R

    2015-01-01

    Power converters require passive low-pass filters which are capable of reducing voltage ripples effectively. In contrast to signal filters, the components of power filters must carry large currents or withstand large voltages, respectively. In this paper, three different suitable filter struc tures for d.c./d.c. power converters with inductive load are introduced. The formulas needed to calculate the filter components are derived step by step and practical examples are given. The behaviour of the three discussed filters is compared by means of the examples. P ractical aspects for the realization of power filters are also discussed.

  5. Method of securing filter elements

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Erik P.; Haslam, Jeffery L.; Mitchell, Mark A.

    2016-10-04

    A filter securing system including a filter unit body housing; at least one tubular filter element positioned in the filter unit body housing, the tubular filter element having a closed top and an open bottom; a dimple in either the filter unit body housing or the top of the tubular filter element; and a socket in either the filter unit body housing or the top of the tubular filter element that receives the dimple in either the filter unit body housing or the top of the tubular filter element to secure the tubular filter element to the filter unit body housing.

  6. Generalized Hampel Filters

    Science.gov (United States)

    Pearson, Ronald K.; Neuvo, Yrjö; Astola, Jaakko; Gabbouj, Moncef

    2016-12-01

    The standard median filter based on a symmetric moving window has only one tuning parameter: the window width. Despite this limitation, this filter has proven extremely useful and has motivated a number of extensions: weighted median filters, recursive median filters, and various cascade structures. The Hampel filter is a member of the class of decsion filters that replaces the central value in the data window with the median if it lies far enough from the median to be deemed an outlier. This filter depends on both the window width and an additional tuning parameter t, reducing to the median filter when t=0, so it may be regarded as another median filter extension. This paper adopts this view, defining and exploring the class of generalized Hampel filters obtained by applying the median filter extensions listed above: weighted Hampel filters, recursive Hampel filters, and their cascades. An important concept introduced here is that of an implosion sequence, a signal for which generalized Hampel filter performance is independent of the threshold parameter t. These sequences are important because the added flexibility of the generalized Hampel filters offers no practical advantage for implosion sequences. Partial characterization results are presented for these sequences, as are useful relationships between root sequences for generalized Hampel filters and their median-based counterparts. To illustrate the performance of this filter class, two examples are considered: one is simulation-based, providing a basis for quantitative evaluation of signal recovery performance as a function of t, while the other is a sequence of monthly Italian industrial production index values that exhibits glaring outliers.

  7. MST Filterability Tests

    Energy Technology Data Exchange (ETDEWEB)

    Poirier, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Burket, P. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Duignan, M. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-12

    The Savannah River Site (SRS) is currently treating radioactive liquid waste with the Actinide Removal Process (ARP) and the Modular Caustic Side Solvent Extraction Unit (MCU). The low filter flux through the ARP has limited the rate at which radioactive liquid waste can be treated. Recent filter flux has averaged approximately 5 gallons per minute (gpm). Salt Batch 6 has had a lower processing rate and required frequent filter cleaning. Savannah River Remediation (SRR) has a desire to understand the causes of the low filter flux and to increase ARP/MCU throughput. In addition, at the time the testing started, SRR was assessing the impact of replacing the 0.1 micron filter with a 0.5 micron filter. This report describes testing of MST filterability to investigate the impact of filter pore size and MST particle size on filter flux and testing of filter enhancers to attempt to increase filter flux. The authors constructed a laboratory-scale crossflow filter apparatus with two crossflow filters operating in parallel. One filter was a 0.1 micron Mott sintered SS filter and the other was a 0.5 micron Mott sintered SS filter. The authors also constructed a dead-end filtration apparatus to conduct screening tests with potential filter aids and body feeds, referred to as filter enhancers. The original baseline for ARP was 5.6 M sodium salt solution with a free hydroxide concentration of approximately 1.7 M.3 ARP has been operating with a sodium concentration of approximately 6.4 M and a free hydroxide concentration of approximately 2.5 M. SRNL conducted tests varying the concentration of sodium and free hydroxide to determine whether those changes had a significant effect on filter flux. The feed slurries for the MST filterability tests were composed of simple salts (NaOH, NaNO2, and NaNO3) and MST (0.2 – 4.8 g/L). The feed slurry for the filter enhancer tests contained simulated salt batch 6 supernate, MST, and filter enhancers.

  8. Guided image filtering.

    Science.gov (United States)

    He, Kaiming; Sun, Jian; Tang, Xiaoou

    2013-06-01

    In this paper, we propose a novel explicit image filter called guided filter. Derived from a local linear model, the guided filter computes the filtering output by considering the content of a guidance image, which can be the input image itself or another different image. The guided filter can be used as an edge-preserving smoothing operator like the popular bilateral filter [1], but it has better behaviors near edges. The guided filter is also a more generic concept beyond smoothing: It can transfer the structures of the guidance image to the filtering output, enabling new filtering applications like dehazing and guided feathering. Moreover, the guided filter naturally has a fast and nonapproximate linear time algorithm, regardless of the kernel size and the intensity range. Currently, it is one of the fastest edge-preserving filters. Experiments show that the guided filter is both effective and efficient in a great variety of computer vision and computer graphics applications, including edge-aware smoothing, detail enhancement, HDR compression, image matting/feathering, dehazing, joint upsampling, etc.

  9. Computer Aided Filter Design.

    Science.gov (United States)

    1987-12-01

    FIR filter can be described in the following. [Ref. 2] 1. FIR filters with exact linear phase can be easily designed. Linear phase filters are important...response for the four cases of linear phase filter , i.e., even or odd symmetry with an even or odd number of terms, can be written in the form: H (eJ ) = e...Ansari, The Design and Application of Optimal FIR Fractional Phase Filters , IEEE on Acoutics, Speech and Signal Processing, Vol. 2, 1987, pp.896-899. 77 14

  10. A unified Kalman filter

    Science.gov (United States)

    Stubberud, Allen R.

    2017-01-01

    When considering problems of linear sequential estimation, two versions of the Kalman filter, the continuous-time version and the discrete-time version, are often used. (A hybrid filter also exists.) In many applications in which the Kalman filter is used, the system to which the filter is applied is a linear continuous-time system, but the Kalman filter is implemented on a digital computer, a discrete-time device. The two general approaches for developing a discrete-time filter for implementation on a digital computer are: (1) approximate the continuous-time system by a discrete-time system (called discretization of the continuous-time system) and develop a filter for the discrete-time approximation; and (2) develop a continuous-time filter for the system and then discretize the continuous-time filter. Generally, the two discrete-time filters will be different, that is, it can be said that discretization and filter generation are not, in general, commutative operations. As a result, any relationship between the discrete-time and continuous-time versions of the filter for the same continuous-time system is often obfuscated. This is particularly true when an attempt is made to generate the continuous-time version of the Kalman filter through a simple limiting process (the sample period going to zero) applied to the discrete-time version. The correct result is, generally, not obtained. In a 1961 research report, Kalman showed that the continuous-time Kalman filter can be obtained from the discrete-time Kalman filter by taking limits as the sample period goes to zero if the white noise process for the continuous-time version is appropriately defined. Using this basic concept, a discrete-time Kalman filter can be developed for a continuous-time system as follows: (1) discretize the continuous-time system using Kalman's technique; and (2) develop a discrete-time Kalman filter for that discrete-time system. Kalman's results show that the discrete-time filter generated in

  11. Bias aware Kalman filters

    DEFF Research Database (Denmark)

    Drecourt, J.-P.; Madsen, H.; Rosbjerg, Dan

    2006-01-01

    . The colored noise filter formulation is extended to correct both time correlated and uncorrelated model error components. A more stable version of the separate filter without feedback is presented. The filters are implemented in an ensemble framework using Latin hypercube sampling. The techniques...... are illustrated on a simple one-dimensional groundwater problem. The results show that the presented filters outperform the standard Kalman filter and that the implementations with bias feedback work in more general conditions than the implementations without feedback. 2005 Elsevier Ltd. All rights reserved....

  12. Ceramic fiber filter technology

    Energy Technology Data Exchange (ETDEWEB)

    Holmes, B.L.; Janney, M.A.

    1996-06-01

    Fibrous filters have been used for centuries to protect individuals from dust, disease, smoke, and other gases or particulates. In the 1970s and 1980s ceramic filters were developed for filtration of hot exhaust gases from diesel engines. Tubular, or candle, filters have been made to remove particles from gases in pressurized fluidized-bed combustion and gasification-combined-cycle power plants. Very efficient filtration is necessary in power plants to protect the turbine blades. The limited lifespan of ceramic candle filters has been a major obstacle in their development. The present work is focused on forming fibrous ceramic filters using a papermaking technique. These filters are highly porous and therefore very lightweight. The papermaking process consists of filtering a slurry of ceramic fibers through a steel screen to form paper. Papermaking and the selection of materials will be discussed, as well as preliminary results describing the geometry of papers and relative strengths.

  13. Three-zone pupil filters

    Science.gov (United States)

    Sheppard, Colin J. R.; Campos, Juan; Escalera, Juan C.; Ledesma, Silvia

    2008-07-01

    The performance of pupil filters consisting of three zones each of constant complex amplitude transmittance is investigated. For filters where the transmittance is real, different classes of potentially useful filter are identified. These include leaky filters with an inner zone of low amplitude transmittance, pure phase filters with phase change of π, and equal area filters.

  14. Generic Kalman Filter Software

    Science.gov (United States)

    Lisano, Michael E., II; Crues, Edwin Z.

    2005-01-01

    The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on

  15. Concentric Split Flow Filter

    Science.gov (United States)

    Stapleton, Thomas J. (Inventor)

    2015-01-01

    A concentric split flow filter may be configured to remove odor and/or bacteria from pumped air used to collect urine and fecal waste products. For instance, filter may be designed to effectively fill the volume that was previously considered wasted surrounding the transport tube of a waste management system. The concentric split flow filter may be configured to split the air flow, with substantially half of the air flow to be treated traveling through a first bed of filter media and substantially the other half of the air flow to be treated traveling through the second bed of filter media. This split flow design reduces the air velocity by 50%. In this way, the pressure drop of filter may be reduced by as much as a factor of 4 as compare to the conventional design.

  16. Crux vena cava filter.

    Science.gov (United States)

    Murphy, Erin H; Johnson, Eric D; Kopchok, George E; Fogarty, Thomas J; Arko, Frank R

    2009-09-01

    Inferior vena cava filters are widely accepted for pulmonary embolic prophylaxis in high-risk patients with contraindications to anticoagulation. While long-term complications have been associated with permanent filters, retrievable filters are now available and have resulted in the rapid expansion of this technology. Nonetheless, complications are still reported with optional filters. Furthermore, device tilting and thrombus load may prevent retrieval in up to 30% of patients, thereby eliminating the benefits of this technology. The Crux vena cava filter is a novel, self-centering, low-profile filter that is designed for ease of delivery, retrievability and improved efficacy while limiting fatigue-related device complications. This device has been proven safe and user-friendly in an ovine model and has recently been implanted in human subjects.

  17. CrowdFilter

    DEFF Research Database (Denmark)

    Mortensen, Michael Lind; Wallace, Byron C.; Kraska, Tim

    for complex multi-criteria search problems through crowdsourcing. The CrowdFilter system is capable of supporting both criteria-level labels and n-gram rationales, capturing the human decision making process behind each filtering choice. Using the data provided through CrowdFilter we also introduce a novel......Multi-criteria filtering of mixed open/closed-world data is a time-consuming task, requiring significant manual effort when latent open-world attributes are present. In this work we introduce a novel open-world filtering framework CrowdFilter, enabling automatic UI generation and label elicitation...... multi-criteria active learning method; capable of incorporating labels and n-gram rationales per inclusion criteria, and thus capable of determining both clear includes/excludes, as well as complex borderline cases. By incorporating the active learning approach into the elicitation process of Crowd...

  18. Conservative Noise Filters

    Directory of Open Access Journals (Sweden)

    Mona M.Jamjoom

    2016-05-01

    Full Text Available Noisy training data have a huge negative impact on machine learning algorithms. Noise-filtering algorithms have been proposed to eliminate such noisy instances. In this work, we empirically show that the most popular noise-filtering algorithms have a large False Positive (FP error rate. In other words, these noise filters mistakenly identify genuine instances as outliers and eliminate them. Therefore, we propose more conservative outlier identification criteria that improve the FP error rate and, thus, the performance of the noise filters. With the new filter, an instance is eliminated if and only if it is misclassified by a mutual decision of Naïve Bayesian (NB classifier and the original filtering criteria being used. The number of genuine instances that are incorrectly eliminated is reduced as a result, thereby improving the classification accuracy.

  19. Hybrid Filter Membrane

    Science.gov (United States)

    Laicer, Castro; Rasimick, Brian; Green, Zachary

    2012-01-01

    Cabin environmental control is an important issue for a successful Moon mission. Due to the unique environment of the Moon, lunar dust control is one of the main problems that significantly diminishes the air quality inside spacecraft cabins. Therefore, this innovation was motivated by NASA s need to minimize the negative health impact that air-suspended lunar dust particles have on astronauts in spacecraft cabins. It is based on fabrication of a hybrid filter comprising nanofiber nonwoven layers coated on porous polymer membranes with uniform cylindrical pores. This design results in a high-efficiency gas particulate filter with low pressure drop and the ability to be easily regenerated to restore filtration performance. A hybrid filter was developed consisting of a porous membrane with uniform, micron-sized, cylindrical pore channels coated with a thin nanofiber layer. Compared to conventional filter media such as a high-efficiency particulate air (HEPA) filter, this filter is designed to provide high particle efficiency, low pressure drop, and the ability to be regenerated. These membranes have well-defined micron-sized pores and can be used independently as air filters with discreet particle size cut-off, or coated with nanofiber layers for filtration of ultrafine nanoscale particles. The filter consists of a thin design intended to facilitate filter regeneration by localized air pulsing. The two main features of this invention are the concept of combining a micro-engineered straight-pore membrane with nanofibers. The micro-engineered straight pore membrane can be prepared with extremely high precision. Because the resulting membrane pores are straight and not tortuous like those found in conventional filters, the pressure drop across the filter is significantly reduced. The nanofiber layer is applied as a very thin coating to enhance filtration efficiency for fine nanoscale particles. Additionally, the thin nanofiber coating is designed to promote capture of

  20. Oriented Fiber Filter Media

    Directory of Open Access Journals (Sweden)

    R. Bharadwaj

    2008-06-01

    Full Text Available Coalescing filters are widely used throughout industry and improved performance will reduce droplet emissions and operating costs. Experimental observations show orientation of micro fibers in filter media effect the permeability and the separation efficiency of the filter media. In this work two methods are used to align the fibers to alter the filter structure. The results show that axially aligned fiber media improve quality factor on the order of 20% and cutting media on an angle from a thick layered media can improve performance by about 40%. The results also show the improved performance is not monotonically correlated to the average fiber angle of the medium.

  1. Fundamentals of Stochastic Filtering

    CERN Document Server

    Crisan, Dan

    2008-01-01

    The objective of stochastic filtering is to determine the best estimate for the state of a stochastic dynamical system from partial observations. The solution of this problem in the linear case is the well known Kalman-Bucy filter which has found widespread practical application. The purpose of this book is to provide a rigorous mathematical treatment of the non-linear stochastic filtering problem using modern methods. Particular emphasis is placed on the theoretical analysis of numerical methods for the solution of the filtering problem via particle methods. The book should provide sufficient

  2. Method And Apparatus For Detecting Chemical Binding

    Energy Technology Data Exchange (ETDEWEB)

    Warner, Benjamin P. (Los Alamos, NM); Havrilla, George J. (Los Alamos, NM); Miller, Thomasin C. (Los Alamos, NM); Wells, Cyndi A. (Los Alamos, NM)

    2005-02-22

    The method for screening binding between a target binder and potential pharmaceutical chemicals involves sending a solution (preferably an aqueous solution) of the target binder through a conduit to a size exclusion filter, the target binder being too large to pass through the size exclusion filter, and then sending a solution of one or more potential pharmaceutical chemicals (preferably an aqueous solution) through the same conduit to the size exclusion filter after target binder has collected on the filter. The potential pharmaceutical chemicals are small enough to pass through the filter. Afterwards, x-rays are sent from an x-ray source to the size exclusion filter, and if the potential pharmaceutical chemicals form a complex with the target binder, the complex produces an x-ray fluorescence signal having an intensity that indicates that a complex has formed.

  3. Method and apparatus for detecting chemical binding

    Energy Technology Data Exchange (ETDEWEB)

    Warner, Benjamin P. (Los Alamos, NM); Havrilla, George J. (Los Alamos, NM); Miller, Thomasin C. (Los Alamos, NM); Wells, Cyndi A. (Los Alamos, NM)

    2007-07-10

    The method for screening binding between a target binder and potential pharmaceutical chemicals involves sending a solution (preferably an aqueous solution) of the target binder through a conduit to a size exclusion filter, the target binder being too large to pass through the size exclusion filter, and then sending a solution of one or more potential pharmaceutical chemicals (preferably an aqueous solution) through the same conduit to the size exclusion filter after target binder has collected on the filter. The potential pharmaceutical chemicals are small enough to pass through the filter. Afterwards, x-rays are sent from an x-ray source to the size exclusion filter, and if the potential pharmaceutical chemicals form a complex with the target binder, the complex produces an x-ray fluorescence signal having an intensity that indicates that a complex has formed.

  4. Filter holder and gasket assembly for candle or tube filters

    Science.gov (United States)

    Lippert, Thomas Edwin; Alvin, Mary Anne; Bruck, Gerald Joseph; Smeltzer, Eugene E.

    1999-03-02

    A filter holder and gasket assembly for holding a candle filter element within a hot gas cleanup system pressure vessel. The filter holder and gasket assembly includes a filter housing, an annular spacer ring securely attached within the filter housing, a gasket sock, a top gasket, a middle gasket and a cast nut.

  5. Fast Anisotropic Gauss Filtering

    NARCIS (Netherlands)

    Geusebroek, J.M.; Smeulders, A.W.M.; van de Weijer, J.; Heyden, A.; Sparr, G.; Nielsen, M.; Johansen, P.

    2002-01-01

    We derive the decomposition of the anisotropic Gaussian in a one dimensional Gauss filter in the x-direction followed by a one dimensional filter in a non-orthogonal direction phi. So also the anisotropic Gaussian can be decomposed by dimension. This appears to be extremely efficient from a computin

  6. Multilevel ensemble Kalman filter

    KAUST Repository

    Chernov, Alexey

    2016-01-06

    This work embeds a multilevel Monte Carlo (MLMC) sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF). In terms of computational cost vs. approximation error the asymptotic performance of the multilevel ensemble Kalman filter (MLEnKF) is superior to the EnKF s.

  7. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Wells, George; Beaton, Dorcas E; Tugwell, Peter;

    2014-01-01

    The "Discrimination" part of the OMERACT Filter asks whether a measure discriminates between situations that are of interest. "Feasibility" in the OMERACT Filter encompasses the practical considerations of using an instrument, including its ease of use, time to complete, monetary costs, and inter...

  8. Vena cava filter; Vena-cava-Filter

    Energy Technology Data Exchange (ETDEWEB)

    Helmberger, T. [Klinikum Bogenhausen, Institut fuer Diagnostische und Interventionelle Radiologie und Nuklearmedizin, Muenchen (Germany)

    2007-05-15

    Fulminant pulmonary embolism is one of the major causes of death in the Western World. In most cases, deep leg and pelvic venous thrombosis are the cause. If an anticoagulant/thrombotic therapy is no longer possible or ineffective, a vena cava filter implant may be indicated if an embolism is threatening. Implantation of the filter is a simple and safe intervention. Nevertheless, it is necessary to take into consideration that the data base for determining the indications for this treatment are very limited. Currently, a reduction in the risk of thromboembolism with the use of filters of about 30%, of recurrences of almost 5% and fatal pulmonary embolism of 1% has been reported, with a risk of up to 20% of filter induced vena cava thrombosis. (orig.) [German] Die fulminante Lungenembolie zaehlt zu den Haupttodesursachen in der westlichen Welt. In der Mehrzahl der Faelle sind tiefe Bein- und Beckenvenenthrombosen ursaechlich verantwortlich. Ist eine antikoagulative/-thrombotische Therapie nicht (mehr) moeglich oder unwirksam, kann bei drohender Emboliegefahr die Vena-cava-Filterimplantation indiziert sein. Die Filterimplantation ist eine einfache und sehr sichere Intervention. Dennoch muss bei der Indikationsstellung beruecksichtigt werden, dass die Datenlage zur Wirksamkeit sehr limitiert ist. So wird aktuell ueber eine Reduktion des Thrombembolierisikos um 30% bei Embolierezidiven von knapp 5% und fatalen Lungenembolien von 1% unter Filterprophylaxe berichtet, bei einem Risiko von bis zu 20% fuer die filterinduzierte Vena-cava-Thrombose. (orig.)

  9. Weighted guided image filtering.

    Science.gov (United States)

    Li, Zhengguo; Zheng, Jinghong; Zhu, Zijian; Yao, Wei; Wu, Shiqian

    2015-01-01

    It is known that local filtering-based edge preserving smoothing techniques suffer from halo artifacts. In this paper, a weighted guided image filter (WGIF) is introduced by incorporating an edge-aware weighting into an existing guided image filter (GIF) to address the problem. The WGIF inherits advantages of both global and local smoothing filters in the sense that: 1) the complexity of the WGIF is O(N) for an image with N pixels, which is same as the GIF and 2) the WGIF can avoid halo artifacts like the existing global smoothing filters. The WGIF is applied for single image detail enhancement, single image haze removal, and fusion of differently exposed images. Experimental results show that the resultant algorithms produce images with better visual quality and at the same time halo artifacts can be reduced/avoided from appearing in the final images with negligible increment on running times.

  10. Robustifying Vector Median Filter

    Directory of Open Access Journals (Sweden)

    Valentín Gregori

    2011-08-01

    Full Text Available This paper describes two methods for impulse noise reduction in colour images that outperform the vector median filter from the noise reduction capability point of view. Both methods work by determining first the vector median in a given filtering window. Then, the use of complimentary information from componentwise analysis allows to build robust outputs from more reliable components. The correlation among the colour channels is taken into account in the processing and, as a result, a more robust filter able to process colour images without introducing colour artifacts is obtained. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter. Objective measures demonstrate the goodness of the achieved improvement.

  11. Filter cake breaker systems

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Marcelo H.F. [Poland Quimica Ltda., Duque de Caxias, RJ (Brazil)

    2004-07-01

    Drilling fluids filter cakes are based on a combination of properly graded dispersed particles and polysaccharide polymers. High efficiency filter cakes are formed by these combination , and their formation on wellbore walls during the drilling process has, among other roles, the task of protecting the formation from instantaneous or accumulative invasion of drilling fluid filtrate, granting stability to well and production zones. Filter cake minimizes contact between drilling fluid filtrate and water, hydrocarbons and clay existent in formations. The uniform removal of the filter cake from the entire interval is a critical factor of the completion process. The main methods used to breaking filter cake are classified into two groups, external or internal, according to their removal mechanism. The aim of this work is the presentation of these mechanisms as well their efficiency. (author)

  12. Naive Bayesian for Email Filtering

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The paper presents a method of email filter based on Naive Bayesian theory that can effectively filter junk mail and illegal mail. Furthermore, the keys of implementation are discussed in detail. The filtering model is obtained from training set of email. The filtering can be done without the users specification of filtering rules.

  13. Binding Procurement

    Science.gov (United States)

    Rao, Gopalakrishna M.; Vaidyanathan, Hari

    2007-01-01

    This viewgraph presentation reviews the use of the binding procurement process in purchasing Aerospace Flight Battery Systems. NASA Engineering and Safety Center (NESC) requested NASA Aerospace Flight Battery Systems Working Group to develop a set of guideline requirements document for Binding Procurement Contracts.

  14. Derivative free filtering using Kalmtool

    DEFF Research Database (Denmark)

    Bayramoglu, Enis; Hansen, Søren; Ravn, Ole;

    2010-01-01

    In this paper we present a toolbox enabling easy evaluation and comparison of different filtering algorithms. The toolbox is called Kalmtool 4 and is a set of MATLAB tools for state estimation of nonlinear systems. The toolbox contains functions for extended Kalman filtering as well as for DD1...... filter and the DD2 filter. It also contains functions for Unscented Kalman filters as well as several versions of particle filters. The toolbox requires MATLAB version 7, but no additional toolboxes are required....

  15. Circuits and filters handbook

    CERN Document Server

    Chen, Wai-Kai

    2003-01-01

    A bestseller in its first edition, The Circuits and Filters Handbook has been thoroughly updated to provide the most current, most comprehensive information available in both the classical and emerging fields of circuits and filters, both analog and digital. This edition contains 29 new chapters, with significant additions in the areas of computer-aided design, circuit simulation, VLSI circuits, design automation, and active and digital filters. It will undoubtedly take its place as the engineer's first choice in looking for solutions to problems encountered in the design, analysis, and behavi

  16. EMI filter design

    CERN Document Server

    Ozenbaugh, Richard Lee

    2011-01-01

    With today's electrical and electronics systems requiring increased levels of performance and reliability, the design of robust EMI filters plays a critical role in EMC compliance. Using a mix of practical methods and theoretical analysis, EMI Filter Design, Third Edition presents both a hands-on and academic approach to the design of EMI filters and the selection of components values. The design approaches covered include matrix methods using table data and the use of Fourier analysis, Laplace transforms, and transfer function realization of LC structures. This edition has been fully revised

  17. Randomized Filtering Algorithms

    DEFF Research Database (Denmark)

    Katriel, Irit; Van Hentenryck, Pascal

    2008-01-01

    of AllDifferent and is generalization, the Global Cardinality Constraint. The first delayed filtering scheme is a Monte Carlo algorithm: its running time is superior, in the worst case, to that of enforcing are consistency after every domain event, while its filtering effectiveness is analyzed...... in the expected sense. The second scheme is a Las Vegas algorithm using filtering triggers: Its effectiveness is the same as enforcing are consistency after every domain event, while in the expected case it is faster by a factor of m/n, where n and m are, respectively, the number of nodes and edges...

  18. Air Filter Simulation by Geodict

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-peng; Kitai Kim; Changhwan Lee; Jooyong Kim

    2006-01-01

    In this paper, we discussed the relationship of filter efficiency and pressure drop with the porosity, fiber diameter and filter thickness by Geodict. We found that filter efficiency will increase when filter porosity and fiber diameter decreasing or filter thickness increasing. And the pressure drop has a linear relationship with filter thickness and non-linear relationship with filter porosity and fiber diameter. We also compared the simulation results with the real test results by TSI 3160. Although there are some differences, I think Geodict can be used to predict filter efficiency and pressure drop.

  19. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Kirwan, John R; Boers, Maarten; Hewlett, Sarah

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter presupposes an explicit framework for identifying the relevant core outcomes that are......OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter presupposes an explicit framework for identifying the relevant core outcomes...... that are universal to all studies of the effects of intervention effects. There is no published outline for instrument choice or development that is aimed at measuring outcome, was derived from broad consensus over its underlying philosophy, or includes a structured and documented critique. Therefore, a new proposal...

  20. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    D'Agostino, Maria-Antonietta; Boers, Maarten; Kirwan, John

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides a framework for the validation of outcome measures for use in rheumatology clinical research. However, imaging and biochemical measures may face additional validation challenges because of their technical nature. The Imagin...

  1. Paul Rodgersi filter Kohilas

    Index Scriptorium Estoniae

    2000-01-01

    28. I Kohila keskkoolis kohaspetsiifiline skulptuur ja performance "Filter". Kooli 130. aastapäeva tähistava ettevõtmise eesotsas oli skulptor Paul Rodgers ja kaks viimase klassi noormeest ئ Marko Heinmäe, Hendrik Karm.

  2. Updating the OMERACT filter

    DEFF Research Database (Denmark)

    Tugwell, Peter; Boers, Maarten; D'Agostino, Maria-Antonietta

    2014-01-01

    OBJECTIVE: The Outcome Measures in Rheumatology (OMERACT) Filter provides guidelines for the development and validation of outcome measures for use in clinical research. The "Truth" section of the OMERACT Filter requires that criteria be met to demonstrate that the outcome instrument meets...... the criteria for content, face, and construct validity. METHODS: Discussion groups critically reviewed a variety of ways in which case studies of current OMERACT Working Groups complied with the Truth component of the Filter and what issues remained to be resolved. RESULTS: The case studies showed...... that there is broad agreement on criteria for meeting the Truth criteria through demonstration of content, face, and construct validity; however, several issues were identified that the Filter Working Group will need to address. CONCLUSION: These issues will require resolution to reach consensus on how Truth...

  3. Paul Rodgersi filter Kohilas

    Index Scriptorium Estoniae

    2000-01-01

    28. I Kohila keskkoolis kohaspetsiifiline skulptuur ja performance "Filter". Kooli 130. aastapäeva tähistava ettevõtmise eesotsas oli skulptor Paul Rodgers ja kaks viimase klassi noormeest ئ Marko Heinmäe, Hendrik Karm.

  4. HEPA air filter (image)

    Science.gov (United States)

    ... pet dander and other irritating allergens from the air. Along with other methods to reduce allergens, such ... controlling the amount of allergens circulating in the air. HEPA filters can be found in most air ...

  5. Perspectives on Nonlinear Filtering

    KAUST Repository

    Law, Kody

    2015-01-07

    The solution to the problem of nonlinear filtering may be given either as an estimate of the signal (and ideally some measure of concentration), or as a full posterior distribution. Similarly, one may evaluate the fidelity of the filter either by its ability to track the signal or its proximity to the posterior filtering distribution. Hence, the field enjoys a lively symbiosis between probability and control theory, and there are plenty of applications which benefit from algorithmic advances, from signal processing, to econometrics, to large-scale ocean, atmosphere, and climate modeling. This talk will survey some recent theoretical results involving accurate signal tracking with noise-free (degenerate) dynamics in high-dimensions (infinite, in principle, but say d between 103 and 108 , depending on the size of your application and your computer), and high-fidelity approximations of the filtering distribution in low dimensions (say d between 1 and several 10s).

  6. Cryogenic coaxial microwave filters

    CERN Document Server

    Tancredi, G; Meeson, P J

    2014-01-01

    At millikelvin temperatures the careful filtering of electromagnetic radiation, especially in the microwave regime, is critical for controlling the electromagnetic environment for experiments in fields such as solid-state quantum information processing and quantum metrology. We present a design for a filter consisting of small diameter dissipative coaxial cables that is straightforward to construct and provides a quantitatively predictable attenuation spectrum. We describe the fabrication process and demonstrate that the performance of the filters is in good agreement with theoretical modelling. We further perform an indicative test of the performance of the filters by making current-voltage measurements of small, underdamped Josephson Junctions at 15 mK and we present the results.

  7. Holographic interference filters

    Science.gov (United States)

    Diehl, Damon W.

    Holographic mirrors have wavelength-selection properties and thus qualify as a class of interference filters. Two theoretical methods for analyzing such structures are developed. The first method uses Hill's matrix method to yield closed-forms solutions in terms of the Floquet-Bloch waves within a periodic structure. A process is developed for implementing this solution method on a computer, using sparse-matrix memory allocation, numerical root-finding algorithms, and inverse-iteration techniques. It is demonstrated that Hill's matrix method is valid for the analysis of finite and multi-periodic problems. The second method of theoretical analysis is a transfer-matrix technique, which is herein termed thin-film decomposition. It is shown that the two methods of solution yield results that differ by, at worst, a fraction of a percent. Using both calculation techniques, a number of example problems are explored. Of key importance is the construction of a set of curves that are useful for the design and characterization of holographic interference filters. In addition to the theoretical development, methods are presented for the fabrication of holographic interference filters using DuPont HRF-800X001 photopolymer. Central to the exposure system is a frequency-stabilized, tunable dye laser. The types of filters fabricated include single-tone reflection filters, two types of multitone reflection filters, and reflection filters for infrared wavelengths. These filters feature index profiles that are not easily attainable through other fabrication methods. As a supplement to the body of the dissertation, the computer algorithms developed to implement Hill's matrix method and thin-film decomposition are also included as an appendix. Further appendices provide more information on Floquet's theorem and Hill's matrix method. A final appendix presents a design for an infrared laser spectrophotometer.

  8. The Endogenous Kalman Filter

    OpenAIRE

    Brad Baxter; Liam Graham; Stephen Wright

    2007-01-01

    We relax the assumption of full information that underlies most dynamic general equilibrium models, and instead assume agents optimally form estimates of the states from an incomplete information set. We derive a version of the Kalman filter that is endogenous to agents' optimising decisions, and state conditions for its convergence. We show the (restrictive) conditions under which the endogenous Kalman filter will at least asymptotically reveal the true states. In general we show that incomp...

  9. Inorganic UV filters

    Directory of Open Access Journals (Sweden)

    Eloísa Berbel Manaia

    2013-06-01

    Full Text Available Nowadays, concern over skin cancer has been growing more and more, especially in tropical countries where the incidence of UVA/B radiation is higher. The correct use of sunscreen is the most efficient way to prevent the development of this disease. The ingredients of sunscreen can be organic and/or inorganic sun filters. Inorganic filters present some advantages over organic filters, such as photostability, non-irritability and broad spectrum protection. Nevertheless, inorganic filters have a whitening effect in sunscreen formulations owing to the high refractive index, decreasing their esthetic appeal. Many techniques have been developed to overcome this problem and among them, the use of nanotechnology stands out. The estimated amount of nanomaterial in use must increase from 2000 tons in 2004 to a projected 58000 tons in 2020. In this context, this article aims to analyze critically both the different features of the production of inorganic filters (synthesis routes proposed in recent years and the permeability, the safety and other characteristics of the new generation of inorganic filters.

  10. Contactor/filter improvements

    Science.gov (United States)

    Stelman, David

    1989-01-01

    A contactor/filter arrangement for removing particulate contaminants from a gaseous stream includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. The housing further includes a gas inlet means, a gas outlet means, and means for moving a body of granular material through the zone. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. Disposed on the upstream face of the filter element is a cover screen which isolates the filter element from contact with the moving granular bed and collects a portion of the particulates so as to form a dust cake having openings small enough to exclude the granular material, yet large enough to receive the dust particles. In one embodiment, the granular material is comprised of prous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses.

  11. Mining dust filter. Bergbaustaubfilter

    Energy Technology Data Exchange (ETDEWEB)

    Igelbuescher, H.; Hoelter, H.

    1988-12-28

    A dust filter for application underground, whose casing is designed as a transportable unit combinable with further casings and fitted with removable filter pockets. These filter pockets have a frame which seals towards the casing and with the lattices on which the filter cloth is stretched and with spacers holding the said lattices at a distance. Each casing as such has inspection ports that are operationable optionally on either side, and clean and crude gas channels on its upper side. The ends of these channels have coupleable head pieces, so that connection is made easy when casings are arranged in a line. Each crude gas channel is connected to the inside of the casing by means of perforations in the floor of said channel, whereas the clean gas channel, for its part, is in connection with the inside of the casing by means of a channel on the head side of the casing. It is thus possible to create a dust filter having practically any desired output by arranging individual modules in line, in which connection each individual module is reliably transportable on the facilities available below ground, as pre-fabricated above ground. Stable support of the sides of the filter cloths is ensured by the lattice that consists of reciprocally cranked longitudinal and transverse wires. 10 figs.

  12. Cast Steel Filtration Trials Using Ceramic-Carbon Filters

    Directory of Open Access Journals (Sweden)

    Lipowska B.

    2014-12-01

    Full Text Available Trials of cast steel filtration using two types of newly-developed foam filters in which carbon was the phase binding ceramic particles have been conducted. In one of the filters the source of carbon was flake graphite and coal-tar pitch, while in the other one graphite was replaced by a cheaper carbon precursor. The newly-developed filters are fired at 1000°C, i.e. at a much lower temperature than the currently applied ZrO2-based filters. During filtration trials the filters were subjected to the attack of a flowing metal stream having a temperature of 1650°C for 30 seconds.

  13. Fractional vortex dipole phase filter

    Science.gov (United States)

    Sharma, Manoj Kumar; Joseph, Joby; Senthilkumaran, Paramasivam

    2014-10-01

    In spatial filtering experiments, the use of vortex phase filters plays an important role in realizing isotropic edge enhancement. In this paper, we report the use of a vortex dipole phase filter in spatial filtering. A dipole made of fractional vortices is used, and its filtering characteristics are studied. It is observed that the filter performance can be tuned by varying the distance of separation between the vortices of the dipole to achieve better contrast and output noise suppression, and when this distance tends to infinity, the filter performs like a 1-D Hilbert mask. Experimental and simulation results are presented.

  14. Choosing and using astronomical filters

    CERN Document Server

    Griffiths, Martin

    2014-01-01

    As a casual read through any of the major amateur astronomical magazines will demonstrate, there are filters available for all aspects of optical astronomy. This book provides a ready resource on the use of the following filters, among others, for observational astronomy or for imaging: Light pollution filters Planetary filters Solar filters Neutral density filters for Moon observation Deep-sky filters, for such objects as galaxies, nebulae and more Deep-sky objects can be imaged in much greater detail than was possible many years ago. Amateur astronomers can take

  15. An IIR median hybrid filter

    Science.gov (United States)

    Bauer, Peter H.; Sartori, Michael A.; Bryden, Timothy M.

    1992-01-01

    A new class of nonlinear filters, the so-called class of multidirectional infinite impulse response median hybrid filters, is presented and analyzed. The input signal is processed twice using a linear shift-invariant infinite impulse response filtering module: once with normal causality and a second time with inverted causality. The final output of the MIMH filter is the median of the two-directional outputs and the original input signal. Thus, the MIMH filter is a concatenation of linear filtering and nonlinear filtering (a median filtering module). Because of this unique scheme, the MIMH filter possesses many desirable properties which are both proven and analyzed (including impulse removal, step preservation, and noise suppression). A comparison to other existing median type filters is also provided.

  16. Two-zone pupil filters

    Science.gov (United States)

    Sheppard, Colin J. R.; Campos, Juan; Escalera, Juan C.; Ledesma, Silvia

    2008-03-01

    The performance of pupil filters consisting of two zones each of constant complex amplitude transmittance is investigated. For filters where the transmittance is real, different classes of potentially useful filter are identified and optimized. These include leaky filters with an inner zone of low amplitude transmittance, pure phase filters with phase change of π, and equal area filters. The first of these minimizes the relative power in the outer rings for a given axial resolution, the second maximizes the Strehl ratio for a given transverse resolution, and the third minimizes the relative power in the outer rings for a given transverse resolution. Complex filters can give an axially shifted maximum in intensity: the performance parameters calculated relative to the true focus are investigated for some different classes of filter, but filters with phase change not equal to π are found to give inferior performance to the real value filters.

  17. Remotely serviced filter and housing

    Science.gov (United States)

    Ross, M.J.; Zaladonis, L.A.

    1987-07-22

    A filter system for a hot cell comprises a housing adapted for input of air or other gas to be filtered, flow of the air through a filter element, and exit of filtered air. The housing is tapered at the top to make it easy to insert a filter cartridge holds the filter element while the air or other gas is passed through the filter element. Captive bolts in trunnion nuts are readily operated by electromechanical manipulators operating power wrenches to secure and release the filter cartridge. The filter cartridge is adapted to make it easy to change a filter element by using a master-slave manipulator at a shielded window station. 6 figs.

  18. Multilevel Mixture Kalman Filter

    Directory of Open Access Journals (Sweden)

    Xiaodong Wang

    2004-11-01

    Full Text Available The mixture Kalman filter is a general sequential Monte Carlo technique for conditional linear dynamic systems. It generates samples of some indicator variables recursively based on sequential importance sampling (SIS and integrates out the linear and Gaussian state variables conditioned on these indicators. Due to the marginalization process, the complexity of the mixture Kalman filter is quite high if the dimension of the indicator sampling space is high. In this paper, we address this difficulty by developing a new Monte Carlo sampling scheme, namely, the multilevel mixture Kalman filter. The basic idea is to make use of the multilevel or hierarchical structure of the space from which the indicator variables take values. That is, we draw samples in a multilevel fashion, beginning with sampling from the highest-level sampling space and then draw samples from the associate subspace of the newly drawn samples in a lower-level sampling space, until reaching the desired sampling space. Such a multilevel sampling scheme can be used in conjunction with the delayed estimation method, such as the delayed-sample method, resulting in delayed multilevel mixture Kalman filter. Examples in wireless communication, specifically the coherent and noncoherent 16-QAM over flat-fading channels, are provided to demonstrate the performance of the proposed multilevel mixture Kalman filter.

  19. Multilevel ensemble Kalman filtering

    KAUST Repository

    Hoel, Haakon

    2016-01-08

    The ensemble Kalman filter (EnKF) is a sequential filtering method that uses an ensemble of particle paths to estimate the means and covariances required by the Kalman filter by the use of sample moments, i.e., the Monte Carlo method. EnKF is often both robust and efficient, but its performance may suffer in settings where the computational cost of accurate simulations of particles is high. The multilevel Monte Carlo method (MLMC) is an extension of classical Monte Carlo methods which by sampling stochastic realizations on a hierarchy of resolutions may reduce the computational cost of moment approximations by orders of magnitude. In this work we have combined the ideas of MLMC and EnKF to construct the multilevel ensemble Kalman filter (MLEnKF) for the setting of finite dimensional state and observation spaces. The main ideas of this method is to compute particle paths on a hierarchy of resolutions and to apply multilevel estimators on the ensemble hierarchy of particles to compute Kalman filter means and covariances. Theoretical results and a numerical study of the performance gains of MLEnKF over EnKF will be presented. Some ideas on the extension of MLEnKF to settings with infinite dimensional state spaces will also be presented.

  20. NOTCH FILTER USING SIMULATED INDUCTOR

    Directory of Open Access Journals (Sweden)

    D.SUSAN,

    2011-06-01

    Full Text Available The design of analog filters at low frequencies is not possible because the size of inductors becomes very large. In such cases, the simulated inductors using operational amplifiers are used. This paper deals with the implementation of notch filter using band pass filter which uses simulated inductor where the direct implementation of notch filter using simulated inductor is not possible because of floating inductor. The design of notch filter and the simulation done in PSPICE is presented.

  1. Improved directional-distance filter

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper proposes a new spatial-distance weighting function.By combining the weighting function and the traditional directional-distance filter (DDF) in a novel way,a new vector filter-the adaptive distance-weighted directional-distance filter (ADWDDF)-is presented.The experimental results show that the proposed solution provides better filtering performance and preserves better image chromaticity and edge or detail information compared with the traditional DDF and some other typical vector filters.

  2. DOE HEPA filter test program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This standard establishes essential elements of a Department of Energy (DOE) program for testing HEPA filters to be installed in DOE nuclear facilities or used in DOE-contracted activities. A key element is the testing of HEPA filters for performance at a DOE Filter Test Facility (FTF) prior to installation. Other key elements are (1) providing for a DOE HEPA filter procurement program, and (2) verifying that HEPA filters to be installed in nuclear facilities appear on a Qualified Products List (QPL).

  3. Stack filter classifiers

    Energy Technology Data Exchange (ETDEWEB)

    Porter, Reid B [Los Alamos National Laboratory; Hush, Don [Los Alamos National Laboratory

    2009-01-01

    Just as linear models generalize the sample mean and weighted average, weighted order statistic models generalize the sample median and weighted median. This analogy can be continued informally to generalized additive modeels in the case of the mean, and Stack Filters in the case of the median. Both of these model classes have been extensively studied for signal and image processing but it is surprising to find that for pattern classification, their treatment has been significantly one sided. Generalized additive models are now a major tool in pattern classification and many different learning algorithms have been developed to fit model parameters to finite data. However Stack Filters remain largely confined to signal and image processing and learning algorithms for classification are yet to be seen. This paper is a step towards Stack Filter Classifiers and it shows that the approach is interesting from both a theoretical and a practical perspective.

  4. Automated electronic filter design

    CERN Document Server

    Banerjee, Amal

    2017-01-01

    This book describes a novel, efficient and powerful scheme for designing and evaluating the performance characteristics of any electronic filter designed with predefined specifications. The author explains techniques that enable readers to eliminate complicated manual, and thus error-prone and time-consuming, steps of traditional design techniques. The presentation includes demonstration of efficient automation, using an ANSI C language program, which accepts any filter design specification (e.g. Chebyschev low-pass filter, cut-off frequency, pass-band ripple etc.) as input and generates as output a SPICE(Simulation Program with Integrated Circuit Emphasis) format netlist. Readers then can use this netlist to run simulations with any version of the popular SPICE simulator, increasing accuracy of the final results, without violating any of the key principles of the traditional design scheme.

  5. Adaptive digital filters

    CERN Document Server

    Kovačević, Branko; Milosavljević, Milan

    2013-01-01

    “Adaptive Digital Filters” presents an important discipline applied to the domain of speech processing. The book first makes the reader acquainted with the basic terms of filtering and adaptive filtering, before introducing the field of advanced modern algorithms, some of which are contributed by the authors themselves. Working in the field of adaptive signal processing requires the use of complex mathematical tools. The book offers a detailed presentation of the mathematical models that is clear and consistent, an approach that allows everyone with a college level of mathematics knowledge to successfully follow the mathematical derivations and descriptions of algorithms.   The algorithms are presented in flow charts, which facilitates their practical implementation. The book presents many experimental results and treats the aspects of practical application of adaptive filtering in real systems, making it a valuable resource for both undergraduate and graduate students, and for all others interested in m...

  6. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  7. Filters in topology optimization

    DEFF Research Database (Denmark)

    Bourdin, Blaise

    1999-01-01

    In this article, a modified (``filtered'') version of the minimum compliance topology optimization problem is studied. The direct dependence of the material properties on its pointwise density is replaced by a regularization of the density field using a convolution operator. In this setting...... it is possible to establish the existence of solutions. Moreover, convergence of an approximation by means of finite elements can be obtained. This is illustrated through some numerical experiments. The ``filtering'' technique is also shown to cope with two important numerical problems in topology optimization...

  8. A NMR reverse diffusion filter for the simplification of spectra of complex mixtures and the study of drug receptor interactions.

    Science.gov (United States)

    Vega-Vázquez, M; Cobas, J C; Oliveira de Sousa, F F; Martin-Pastor, M

    2011-08-01

    A reverse diffusion filter NMR experiment (Drev) is proposed for the study of small molecules in binding with macromolecules. The filtering efficiency of Drev to eliminate the signals of the macromolecule is shown to be superior to conventional transverse relaxation filters at least for macromolecules containing a significant fraction of flexible residues. The Drev filter was also a useful complement for ligand-based NMR screening in combination with saturation transfer difference experiments.

  9. Statistically-Efficient Filtering in Impulsive Environments: Weighted Myriad Filters

    Directory of Open Access Journals (Sweden)

    Gonzalez Juan G

    2002-01-01

    Full Text Available Linear filtering theory has been largely motivated by the characteristics of Gaussian signals. In the same manner, the proposed Myriad Filtering methods are motivated by the need for a flexible filter class with high statistical efficiency in non-Gaussian impulsive environments that can appear in practice. Myriad filters have a solid theoretical basis, are inherently more powerful than median filters, and are very general, subsuming traditional linear FIR filters. The foundation of the proposed filtering algorithms lies in the definition of the myriad as a tunable estimator of location derived from the theory of robust statistics. We prove several fundamental properties of this estimator and show its optimality in practical impulsive models such as the -stable and generalized- . We then extend the myriad estimation framework to allow the use of weights. In the same way as linear FIR filters become a powerful generalization of the mean filter, filters based on running myriads reach all of their potential when a weighting scheme is utilized. We derive the "normal" equations for the optimal myriad filter, and introduce a suboptimal methodology for filter tuning and design. The strong potential of myriad filtering and estimation in impulsive environments is illustrated with several examples.

  10. Domain wall filters

    CERN Document Server

    Bär, O; Neuberger, H; Witzel, O; Baer, Oliver; Narayanan, Rajamani; Neuberger, Herbert; Witzel, Oliver

    2007-01-01

    We propose using the extra dimension separating the domain walls carrying lattice quarks of opposite handedness to gradually filter out the ultraviolet fluctuations of the gauge fields that are felt by the fermionic excitations living in the bulk. This generalization of the homogeneous domain wall construction has some theoretical features that seem nontrivial.

  11. Fast Anisotropic Gauss Filters

    NARCIS (Netherlands)

    Geusebroek, J.M.; Smeulders, A.W.M.; van de Weijer, J.

    2003-01-01

    We derive the decomposition of the anisotropic Gaussian in a one dimensional Gauss filter in the x-direction phi. So also the anisotropic Gaussian can be decomposed by dimension. This appears to be extremely efficient from a computing perspective. An implementation scheme for normal covolution and f

  12. Ceramic HEPA Filter Program

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, M A; Bergman, W; Haslam, J; Brown, E P; Sawyer, S; Beaulieu, R; Althouse, P; Meike, A

    2012-04-30

    Potential benefits of ceramic filters in nuclear facilities: (1) Short term benefit for DOE, NRC, and industry - (a) CalPoly HTTU provides unique testing capability to answer questions for DOE - High temperature testing of materials, components, filter, (b) Several DNFSB correspondences and presentations by DNFSB members have highlighted the need for HEPA filter R and D - DNFSB Recommendation 2009-2 highlighted a nuclear facility response to an evaluation basis earthquake followed by a fire (aka shake-n-bake) and CalPoly has capability for a shake-n-bake test; (2) Intermediate term benefit for DOE and industry - (a) Filtration for specialty applications, e.g., explosive applications at Nevada, (b) Spin-off technologies applicable to other commercial industries; and (3) Long term benefit for DOE, NRC, and industry - (a) Across industry, strong desire for better performance filter, (b) Engineering solution to safety problem will improve facility safety and decrease dependence on associated support systems, (c) Large potential life-cycle cost savings, and (d) Facilitates development and deployment of LLNL process innovations to allow continuous ventilation system operation during a fire.

  13. Magnetic-Optical Filter

    CERN Document Server

    Formicola, I; Pinto, C; Cerulo, P

    2007-01-01

    Magnetic-Optical Filter (MOF) is an instrument suited for high precision spectral measurements for its peculiar characteristics. It is employed in Astronomy and in the field of the telecommunications (it is called FADOF there). In this brief paper we summarize its fundamental structure and functioning.

  14. Enhanced Optical Filter Design

    CERN Document Server

    Cushing, David

    2011-01-01

    This book serves as a supplement to the classic texts by Angus Macleod and Philip Baumeister, taking an intuitive approach to the enhancement of optical coating (or filter) performance. Drawing from 40 years of experience in thin film design, Cushing introduces the basics of thin films, the commonly used materials and their deposition, the major coatings and their applications, and improvement methods for each.

  15. Ozone decomposing filter

    Science.gov (United States)

    Simandl, Ronald F.; Brown, John D.; Whinnery, Jr., LeRoy L.

    1999-01-01

    In an improved ozone decomposing air filter carbon fibers are held together with a carbonized binder in a perforated structure. The structure is made by combining rayon fibers with gelatin, forming the mixture in a mold, freeze-drying, and vacuum baking.

  16. Spot- Zombie Filtering System

    Directory of Open Access Journals (Sweden)

    Arathy Rajagopal

    2014-01-01

    Full Text Available A major security challenge on the Internet is the existence of the large number of compromised machines. Such machines have been increasingly used to launch various security attacks including spamming and spreading malware, DDoS, and identity theft. These compromised machines are called “Zombies”. In general E-mail applications and providers uses spam filters to filter the spam messages. Spam filtering is a technique for discriminating the genuine message from the spam messages. The attackers send the spam messages to the targeted machine by exalting the filters, which causes the increase in false positives and false negatives. We develop an effective spam zombie detection system named SPOT by monitoring outgoing messages of a network. SPOT focuses on the number of outgoing messages that are originated or forwarded by each computer on a network to identify the presence of Zombies. SPOT is designed based on a powerful statistical tool called Sequential Probability Ratio Test, which has bounded false positive and false negative error rates.

  17. Digital hum filtering

    Science.gov (United States)

    Knapp, R.W.; Anderson, N.L.

    1994-01-01

    Data may be overprinted by a steady-state cyclical noise (hum). Steady-state indicates that the noise is invariant with time; its attributes, frequency, amplitude, and phase, do not change with time. Hum recorded on seismic data usually is powerline noise and associated higher harmonics; leakage from full-waveform rectified cathodic protection devices that contain the odd higher harmonics of powerline frequencies; or vibrational noise from mechanical devices. The fundamental frequency of powerline hum may be removed during data acquisition with the use of notch filters. Unfortunately, notch filters do not discriminate signal and noise, attenuating both. They also distort adjacent frequencies by phase shifting. Finally, they attenuate only the fundamental mode of the powerline noise; higher harmonics and frequencies other than that of powerlines are not removed. Digital notch filters, applied during processing, have many of the same problems as analog filters applied in the field. The method described here removes hum of a particular frequency. Hum attributes are measured by discrete Fourier analysis, and the hum is canceled from the data by subtraction. Errors are slight and the result of the presence of (random) noise in the window or asynchrony of the hum and data sampling. Error is minimized by increasing window size or by resampling to a finer interval. Errors affect the degree of hum attenuation, not the signal. The residual is steady-state hum of the same frequency. ?? 1994.

  18. Particle filter based entropy

    NARCIS (Netherlands)

    Boers, Y.; Driessen, Hans; Bagchi, Arunabha; Mandal, Pranab K.

    For many problems in the field of tracking or even the wider area of filtering the a posteriori description of the uncertainty can oftentimes not be described by a simple Gaussian density function. In such situations the characterization of the uncertainty by a mean and a covariance does not capture

  19. Spot- Zombie Filtering System

    Directory of Open Access Journals (Sweden)

    Arathy Rajagopal

    2015-10-01

    Full Text Available A major security challenge on the Internet is the existence of the large number of compromised machines. Such machines have been increasingly used to launch various security attacks including spamming and spreading malware, DDoS, and identity theft. These compromised machines are called "Zombies". In general E-mail applications and providers uses spam filters to filter the spam messages. Spam filtering is a technique for discriminating the genuine message from the spam messages. The attackers send the spam messages to the targeted machine by exalting the filters, which causes the increase in false positives and false negatives. We develop an effective spam zombie detection system named SPOT by monitoring outgoing messages of a network. SPOT focuses on the number of outgoing messages that are originated or forwarded by each computer on a network to identify the presence of Zombies. SPOT is designed based on a powerful statistical tool called Sequential Probability Ratio Test, which has bounded false positive and false negative error rates.

  20. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    Science.gov (United States)

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  1. Digital Filters for Low Frequency Equalization

    DEFF Research Database (Denmark)

    Tyril, Marni; Abildgaard, J.; Rubak, Per

    2001-01-01

    Digital filters with high resolution in the low-frequency range are studied. Specifically, for a given computational power, traditional IIR filters are compared with warped FIR filters, warped IIR filters, and modified warped FIR filters termed warped individual z FIR filters (WizFIR). The results...... indicate that IIR filters are the most effective in a number of situations....

  2. Development of DWDM Filter Manufacture

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    DWDM technology is developing rapidly. Thin film narrow bandpass filter plays an important role in this field. This article presents some achievements in developing the DWDM narrow bandpass filters and also describes the results achieved by us.

  3. Analog filters in nanometer CMOS

    CERN Document Server

    Uhrmann, Heimo; Zimmermann, Horst

    2014-01-01

    Starting from the basics of analog filters and the poor transistor characteristics in nanometer CMOS 10 high-performance analog filters developed by the authors in 120 nm and 65 nm CMOS are described extensively. Among them are gm-C filters, current-mode filters, and active filters for system-on-chip realization for Bluetooth, WCDMA, UWB, DVB-H, and LTE applications. For the active filters several operational amplifier designs are described. The book, furthermore, contains a review of the newest state of research on low-voltage low-power analog filters. To cover the topic of the book comprehensively, linearization issues and measurement methods for the characterization of advanced analog filters are introduced in addition. Numerous elaborate illustrations promote an easy comprehension. This book will be of value to engineers and researchers in industry as well as scientists and Ph.D students at universities. The book is also recommendable to graduate students specializing on nanoelectronics, microelectronics ...

  4. PERFORMANCE EVALUATION OF SAND AND CHITOSAN AS DUAL FILTER MEDIA

    Directory of Open Access Journals (Sweden)

    MADHUKAR M

    2012-01-01

    Full Text Available Nuisance due to suspended and colloidal particles causing turbidity has become widespread, severe problem due to urban population and industrial activities. The consequences of turbidity are presence of microorganisms,reduction of dissolved oxygen, etc. Consumption of such water is known to cause water borne diseases.Available water treatment methods for the removal of turbidity and pathogens are coagulation, filtration and disinfection. The common filter media used are sand, activated carbon etc. Chitosan has been used as acoagulant aid and adsorbent. Chitosan when used as a filter media causes the colloidal particles to bind together and is subsequently removed during the process. The column studies using Chitosan in combination with conventional sand filter was carried out in a borosilicate glass column. Chitosan was placed on top of sand layerand constant down flow pattern of 100mL/min was followed. Dual filter media was effective in the reducing turbidity by 93%.

  5. The Rao-Blackwellized Particle Filter: A Filter Bank Implementation

    Directory of Open Access Journals (Sweden)

    Karlsson Rickard

    2010-01-01

    Full Text Available For computational efficiency, it is important to utilize model structure in particle filtering. One of the most important cases occurs when there exists a linear Gaussian substructure, which can be efficiently handled by Kalman filters. This is the standard formulation of the Rao-Blackwellized particle filter (RBPF. This contribution suggests an alternative formulation of this well-known result that facilitates reuse of standard filtering components and which is also suitable for object-oriented programming. Our RBPF formulation can be seen as a Kalman filter bank with stochastic branching and pruning.

  6. Assessment of ceramic membrane filters

    Energy Technology Data Exchange (ETDEWEB)

    Ahluwalia, R.K.; Geyer, H.K.; Im, K.H. [and others

    1995-08-01

    The objectives of this project include the development of analytical models for evaluating the fluid mechanics of membrane coated, dead-end ceramic filters, and to determine the effects of thermal and thermo-chemical aging on the material properties of emerging ceramic hot gas filters. A honeycomb cordierite monolith with a thin ceramic coating and a rigid candle filter were evaluated.

  7. Multilevel particle filter

    KAUST Repository

    Law, Kody

    2016-01-06

    This talk will pertain to the filtering of partially observed diffusions, with discrete-time observations. It is assumed that only biased approximations of the diffusion can be obtained, for choice of an accuracy parameter indexed by l. A multilevel estimator is proposed, consisting of a telescopic sum of increment estimators associated to the successive levels. The work associated to O( 2) mean-square error between the multilevel estimator and average with respect to the filtering distribution is shown to scale optimally, for example as O( 2) for optimal rates of convergence of the underlying diffusion approximation. The method is illustrated on some toy examples as well as estimation of interest rate based on real S&P 500 stock price data.

  8. Filtered cathodic arc source

    Science.gov (United States)

    Falabella, Steven; Sanders, David M.

    1994-01-01

    A continuous, cathodic arc ion source coupled to a macro-particle filter capable of separation or elimination of macro-particles from the ion flux produced by cathodic arc discharge. The ion source employs an axial magnetic field on a cathode (target) having tapered sides to confine the arc, thereby providing high target material utilization. A bent magnetic field is used to guide the metal ions from the target to the part to be coated. The macro-particle filter consists of two straight solenoids, end to end, but placed at 45.degree. to one another, which prevents line-of-sight from the arc spot on the target to the parts to be coated, yet provides a path for ions and electrons to flow, and includes a series of baffles for trapping the macro-particles.

  9. Event Filter Dataflow Software

    CERN Document Server

    Meessen, C; Bosman, M; Karr, K M; Pacheco, A; Qian, Z; Touchard, F

    2000-01-01

    This document describes the software handling the flow of events through the Event Filter. This is the fourth iteration of the implementation of the code. When compared to previous versions, enhancements come from the feedback by users and can be seen as simplifications while the interfaces have been kept identical. The high level design of the dataflow is briefly reminded. Then, the details of the implementation of the components are given.

  10. Web Content Filtering

    OpenAIRE

    Gómez Hidalgo, José María; Puertas Sanz, Enrique; Carrero García, Francisco Manuel; Buenaga Rodríguez, Manuel de

    2009-01-01

    Across the years, Internet has evolved from an academic network to a truly communication medium, reaching impressive levels of audience and becoming a billionaire business. Many of our working, studying, and entertainment activities are nowadays overwhelmingly limited if we get disconnected from the net of networks. And of course, with the use comes abuse. The World Wide Web features a wide variety of content that are harmful for children or just inappropriate in the workplace. Web filtering ...

  11. Carbon nanotube filters

    Science.gov (United States)

    Srivastava, A.; Srivastava, O. N.; Talapatra, S.; Vajtai, R.; Ajayan, P. M.

    2004-09-01

    Over the past decade of nanotube research, a variety of organized nanotube architectures have been fabricated using chemical vapour deposition. The idea of using nanotube structures in separation technology has been proposed, but building macroscopic structures that have controlled geometric shapes, density and dimensions for specific applications still remains a challenge. Here we report the fabrication of freestanding monolithic uniform macroscopic hollow cylinders having radially aligned carbon nanotube walls, with diameters and lengths up to several centimetres. These cylindrical membranes are used as filters to demonstrate their utility in two important settings: the elimination of multiple components of heavy hydrocarbons from petroleum-a crucial step in post-distillation of crude oil-with a single-step filtering process, and the filtration of bacterial contaminants such as Escherichia coli or the nanometre-sized poliovirus (~25 nm) from water. These macro filters can be cleaned for repeated filtration through ultrasonication and autoclaving. The exceptional thermal and mechanical stability of nanotubes, and the high surface area, ease and cost-effective fabrication of the nanotube membranes may allow them to compete with ceramic- and polymer-based separation membranes used commercially.

  12. Archimedes Mass Filter Vaporizer

    Science.gov (United States)

    Putvinski, S.; Agnew, A. F.; Cluggish, B. P.; Ohkawa, T.; Sevier, L.; Umstadter, K. R.; Dresvin, S. V.; Kuteev, B. V.; Feygenson, O. N.; Ivanov, D. V.; Zverev, S. G.; Miroshnikov, I. V.; Egorov, S. M.; Kiesewetter, D. V.; Maliugin, V. I.

    2001-10-01

    Archimedes Technology Group, Inc., is developing a plasma mass separator called the Archimedes Filter that separates waste oxide mixtures ion by ion into two mass groups: light and heavy. Since high-level waste at Hanford has 99.9its radioactivity associated with heavy elements, the Archimedes Filter can effectively decontaminate over three-quarters of that waste. The Filter process involves some preprocessing followed by volatilization and separation by the magnetic and electric fields of the main plasma. This presentation describes the approach to volatilization of the waste oxy-hydroxide mixture by means of a very high heat flux (q > 10 MW/m2). Such a high heat flux is required to ensure congruent evaporation of the complex oxy-hydroxide mixture and is achieved by injection of small droplets of molten waste into an inductively coupled plasma (ICP) torch. This presentation further addresses different issues related to evaporation of the waste including modeling of droplet evaporation, estimates of parameters of plasma torch, and 2D modeling of the plasma. The experimental test bed for oxide vaporization and results of the initial experiments on oxide evaporation in 60 kW ICP torch will also be described.

  13. Hydrodynamics of microbial filter feeding

    DEFF Research Database (Denmark)

    Nielsen, Lasse Tor; Asadzadeh, Seyed Saeed; Dölger, Julia

    2017-01-01

    Microbial filter feeders are an important group of grazers, significant to the microbial loop, aquatic food webs, and biogeochemical cycling. Our understanding of microbial filter feeding is poor, and, importantly, it is unknown what force microbial filter feeders must generate to process adequat...... predict how optimum filter mesh size increases with cell size in microbial filter feeders, a prediction that accords very well with observations. We expect our results to be of significance for small-scale biophysics and trait-based ecological modeling....

  14. Approximately liner phase IIR digital filter banks

    OpenAIRE

    J. D. Ćertić; M. D. Lutovac; L. D. Milić

    2013-01-01

    In this paper, uniform and nonuniform digital filter banks based on approximately linear phase IIR filters and frequency response masking technique (FRM) are presented. Both filter banks are realized as a connection of an interpolated half-band approximately linear phase IIR filter as a first stage of the FRM design and an appropriate number of masking filters. The masking filters are half-band IIR filters with an approximately linear phase. The resulting IIR filter banks are compared with li...

  15. Digital Filters for Low Frequency Equalization

    DEFF Research Database (Denmark)

    Tyril, Marni; Abildgaard, J.; Rubak, Per

    2001-01-01

    Digital filters with high resolution in the low-frequency range are studied. Specifically, for a given computational power, traditional IIR filters are compared with warped FIR filters, warped IIR filters, and modified warped FIR filters termed warped individual z FIR filters (WizFIR). The results...

  16. Advances in Collaborative Filtering

    Science.gov (United States)

    Koren, Yehuda; Bell, Robert

    The collaborative filtering (CF) approach to recommenders has recently enjoyed much interest and progress. The fact that it played a central role within the recently completed Netflix competition has contributed to its popularity. This chapter surveys the recent progress in the field. Matrix factorization techniques, which became a first choice for implementing CF, are described together with recent innovations. We also describe several extensions that bring competitive accuracy into neighborhood methods, which used to dominate the field. The chapter demonstrates how to utilize temporal models and implicit feedback to extend models accuracy. In passing, we include detailed descriptions of some the central methods developed for tackling the challenge of the Netflix Prize competition.

  17. Multilevel ensemble Kalman filtering

    KAUST Repository

    Hoel, Hakon

    2016-06-14

    This work embeds a multilevel Monte Carlo sampling strategy into the Monte Carlo step of the ensemble Kalman filter (EnKF) in the setting of finite dimensional signal evolution and noisy discrete-time observations. The signal dynamics is assumed to be governed by a stochastic differential equation (SDE), and a hierarchy of time grids is introduced for multilevel numerical integration of that SDE. The resulting multilevel EnKF is proved to asymptotically outperform EnKF in terms of computational cost versus approximation accuracy. The theoretical results are illustrated numerically.

  18. Robust Kriged Kalman Filtering

    Energy Technology Data Exchange (ETDEWEB)

    Baingana, Brian; Dall' Anese, Emiliano; Mateos, Gonzalo; Giannakis, Georgios B.

    2015-11-11

    Although the kriged Kalman filter (KKF) has well-documented merits for prediction of spatial-temporal processes, its performance degrades in the presence of outliers due to anomalous events, or measurement equipment failures. This paper proposes a robust KKF model that explicitly accounts for presence of measurement outliers. Exploiting outlier sparsity, a novel l1-regularized estimator that jointly predicts the spatial-temporal process at unmonitored locations, while identifying measurement outliers is put forth. Numerical tests are conducted on a synthetic Internet protocol (IP) network, and real transformer load data. Test results corroborate the effectiveness of the novel estimator in joint spatial prediction and outlier identification.

  19. Charcoal filter testing

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, J. [Nuclear Regulatory Commission, Washington, DC (United States)

    1997-08-01

    In this very brief, informal presentation, a representative of the US Nuclear Regulatory Commission outlines some problems with charcoal filter testing procedures and actions being taken to correct the problems. Two primary concerns are addressed: (1) the process to find the test method is confusing, and (2) the requirements of the reference test procedures result in condensation on the charcoal and causes the test to fail. To address these problems, emergency technical specifications were processed for three nuclear plants. A generic or an administrative letter is proposed as a more permanent solution. 1 fig.

  20. From Microwave Filter to Digital Filter and Back Again

    DEFF Research Database (Denmark)

    Dalby, Arne Brejning

    1989-01-01

    A new very simple state variable flow graph representation for interdigital transmission line bandpass filters is presented, which has led to two important results: 1) A new type of digital filter with properties, that surpass the properties of most other (all pole) digital filtertypes. 2......) The study of the new digital filtertype has led to design formulas for interdigital transmission line filters that are very simple compared to the hitherto known formulas. The accuracy is the same or better....

  1. Filter and Filter Bank Design for Image Texture Recognition

    Energy Technology Data Exchange (ETDEWEB)

    Randen, Trygve

    1997-12-31

    The relevance of this thesis to energy and environment lies in its application to remote sensing such as for instance sea floor mapping and seismic pattern recognition. The focus is on the design of two-dimensional filters for feature extraction, segmentation, and classification of digital images with textural content. The features are extracted by filtering with a linear filter and estimating the local energy in the filter response. The thesis gives a review covering broadly most previous approaches to texture feature extraction and continues with proposals of some new techniques. 143 refs., 59 figs., 7 tabs.

  2. Nanoparticle optical notch filters

    Science.gov (United States)

    Kasinadhuni, Pradeep Kumar

    Developing novel light blocking products involves the design of a nanoparticle optical notch filter, working on the principle of localized surface plasmon resonance (LSPR). These light blocking products can be used in many applications. One such application is to naturally reduce migraine headaches and light sensitivity. Melanopsin ganglion cells present in the retina of the human eye, connect to the suprachiasmatic nucleus (SCN-the body's clock) in the brain, where they participate in the entrainment of the circadian rhythms. As the Melanopsin ganglion cells are involved in triggering the migraine headaches in photophobic patients, it is necessary to block the part of visible spectrum that activates these cells. It is observed from the action potential spectrum of the ganglion cells that they absorb light ranging from 450-500nm (blue-green part) of the visible spectrum with a λmax (peak sensitivity) of around 480nm (blue line). Currently prescribed for migraine patients is the FL-41 coating, which blocks a broad range of wavelengths, including wavelengths associated with melanopsin absorption. The nanoparticle optical notch filter is designed to block light only at 480nm, hence offering an effective prescription for the treatment of migraine headaches.

  3. Robust fault detection filter design

    Science.gov (United States)

    Douglas, Randal Kirk

    The detection filter is a specially tuned linear observer that forms the residual generation part of an analytical redundancy system designed for model-based fault detection and identification. The detection filter has an invariant state subspace structure that produces a residual with known and fixed directional characteristics in response to a known design fault direction. In addition to a parameterization of the detection filter gain, three methods are given for improving performance in the presence of system disturbances, sensor noise, model mismatch and sensitivity to small parameter variations. First, it is shown that by solving a modified algebraic Riccati equation, a stabilizing detection filter gain is found that bounds the H-infinity norm of the transfer matrix from system disturbances and sensor noise to the detection filter residual. Second, a specially chosen expanded-order detection filter is formed with fault detection properties identical to a set of independent reduced-order filters that have no structural constraints. This result is important to the practitioner because the difficult problem of finding a detection filter insensitive to disturbances and sensor noise is converted to the easier problem of finding a set of uncoupled noise insensitive filters. Furthermore, the statistical properties of the reduced-order filter residuals are easier to find than the statistical properties of the structurally constrained detection filter residual. Third, an interpretation of the detection filter as a special case of the dual of the restricted decoupling problem leads to a new detection filter eigenstructure assignment algorithm. The new algorithm places detection filter left eigenvectors, which annihilate the detection spaces, rather than right eigenvectors, which span the detection spaces. This allows for a more flexible observer based fault detection system structure that could not be formulated as a detection filter. Furthermore, the link to the dual

  4. Spatial filters for high average power lasers

    Science.gov (United States)

    Erlandson, Alvin C

    2012-11-27

    A spatial filter includes a first filter element and a second filter element overlapping with the first filter element. The first filter element includes a first pair of cylindrical lenses separated by a first distance. Each of the first pair of cylindrical lenses has a first focal length. The first filter element also includes a first slit filter positioned between the first pair of cylindrical lenses. The second filter element includes a second pair of cylindrical lenses separated by a second distance. Each of the second pair of cylindrical lenses has a second focal length. The second filter element also includes a second slit filter positioned between the second pair of cylindrical lenses.

  5. Reconfigurable Mixed Mode Universal Filter

    Directory of Open Access Journals (Sweden)

    Neelofer Afzal

    2014-01-01

    Full Text Available This paper presents a novel mixed mode universal filter configuration capable of working in voltage and transimpedance mode. The proposed single filter configuration can be reconfigured digitally to realize all the five second order filter functions (types at single output port. Other salient features of proposed configuration include independently programmable filter parameters, full cascadability, and low sensitivity figure. However, all these features are provided at the cost of quite large number of active elements. It needs three digitally programmable current feedback amplifiers and three digitally programmable current conveyors. Use of six active elements is justified by introducing three additional reduced hardware mixed mode universal filter configurations and its comparison with reported filters.

  6. Wavelength Filters in Fibre Optics

    CERN Document Server

    Venghaus, Herbert

    2006-01-01

    Wavelength filters constitute an essential element of fibre-optic networks. This book gives a comprehensive account of the principles and applications of such filters, including their technological realisation. After an introductory chapter on wavelength division multiplexing in current and future fibre optic networks follows a detailed treatment of the phase characteristics of wavelength filters, a factor frequently neglected but of significant importance at high bit rates. Subsequent chapters cover three-dimensional reflection of gratings, arrayed waveguide gratings, fibre Bragg gratings, Fabry-Perot filters, dielectric multilayer filters, ring filters, and interleavers. The book explains the relevant performance parameters, the particular advantages and shortcomings of the various concepts and components, and the preferred applications. It also includes in-depth information on the characteristics of both commercially available devices and those still at the R&D stage. All chapters are authored by inter...

  7. Semi-Hausdorff Fuzzy Filters

    Directory of Open Access Journals (Sweden)

    V. Lakshmana Gomathi Nayagam

    2007-01-01

    Full Text Available The notion of fuzzy filters was studied by Vicente and Aranguren (1988, Lowen (1979, and Ramakrishnan and Nayagam (2002. The notion of fuzzily compactness was introduced and studied by Ramakrishnan and Nayagam (2002. In this paper, an equivalent condition of fuzzily compactness is studied and a new notion of semi-Hausdorffness on fuzzy filters, which cannot be defined in crisp theory of filters, is introduced and studied.

  8. Cuckoo Filter: Simplification and Analysis

    OpenAIRE

    Eppstein, David

    2016-01-01

    The cuckoo filter data structure of Fan, Andersen, Kaminsky, and Mitzenmacher (CoNEXT 2014) performs the same approximate set operations as a Bloom filter in less memory, with better locality of reference, and adds the ability to delete elements as well as to insert them. However, until now it has lacked theoretical guarantees on its performance. We describe a simplified version of the cuckoo filter using fewer hash function calls per query. With this simplification, we provide the first theo...

  9. Multi-filter spectrophotometry simulations

    Science.gov (United States)

    Callaghan, Kim A. S.; Gibson, Brad K.; Hickson, Paul

    1993-01-01

    To complement both the multi-filter observations of quasar environments described in these proceedings, as well as the proposed UBC 2.7 m Liquid Mirror Telescope (LMT) redshift survey, we have initiated a program of simulated multi-filter spectrophotometry. The goal of this work, still very much in progress, is a better quantitative assessment of the multiband technique as a viable mechanism for obtaining useful redshift and morphological class information from large scale multi-filter surveys.

  10. Faraday anomalous dispersion optical filters

    Science.gov (United States)

    Shay, T. M.; Yin, B.; Alvarez, L. S.

    1993-01-01

    The effect of Faraday anomalous dispersion optical filters on infrared and blue transitions of some alkali atoms is calculated. A composite system is designed to further increase the background noise rejection. The measured results of the solar background rejection and image quality through the filter are presented. The results show that the filter may provide high transmission and high background noise rejection with excellent image quality.

  11. Filters and supports in orthoalgebras

    Science.gov (United States)

    Foulis, D. J.; Greechie, R. J.; Rüttimann, G. T.

    1992-05-01

    An orthoalgebra, which is a natural generalization of an orthomodular lattice or poset, may be viewed as a “logic” or “proposition system” and, under a welldefined set of circumstances, its elements may be classified according to the Aristotelian modalities: necessary, impossible, possible, and contingent. The necessary propositions band together to form a local filter, that is, a set that intersects every Boolean subalgebra in a filter. In this paper, we give a coherent account of the basic theory of Orthoalgebras, define and study filters, local filters, and associated structures, and prove a version of the compactness theorem in classical algebraic logic.

  12. Spatial filtering with photonic crystals

    Energy Technology Data Exchange (ETDEWEB)

    Maigyte, Lina [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Rambla Sant Nebridi 22, Terrassa 08222 (Spain); Staliunas, Kestutis [Departament de Física i Enginyeria Nuclear, Universitat Politècnica de Catalunya, Rambla Sant Nebridi 22, Terrassa 08222 (Spain); Institució Catalana de Recerca i Estudis Avançats (ICREA), Pg. Lluís Companys 23, Barcelona 08010 (Spain)

    2015-03-15

    Photonic crystals are well known for their celebrated photonic band-gaps—the forbidden frequency ranges, for which the light waves cannot propagate through the structure. The frequency (or chromatic) band-gaps of photonic crystals can be utilized for frequency filtering. In analogy to the chromatic band-gaps and the frequency filtering, the angular band-gaps and the angular (spatial) filtering are also possible in photonic crystals. In this article, we review the recent advances of the spatial filtering using the photonic crystals in different propagation regimes and for different geometries. We review the most evident configuration of filtering in Bragg regime (with the back-reflection—i.e., in the configuration with band-gaps) as well as in Laue regime (with forward deflection—i.e., in the configuration without band-gaps). We explore the spatial filtering in crystals with different symmetries, including axisymmetric crystals; we discuss the role of chirping, i.e., the dependence of the longitudinal period along the structure. We also review the experimental techniques to fabricate the photonic crystals and numerical techniques to explore the spatial filtering. Finally, we discuss several implementations of such filters for intracavity spatial filtering.

  13. Optimization of integrated polarization filters

    CERN Document Server

    Gagnon, Denis; Déziel, Jean-Luc; Dubé, Louis J

    2014-01-01

    This study reports on the design of small footprint, integrated polarization filters based on engineered photonic lattices. Using a rods-in-air lattice as a basis for a TE filter and a holes-in-slab lattice for the analogous TM filter, we are able to maximize the degree of polarization of the output beams up to 98 % with a transmission efficiency greater than 75 %. The proposed designs allow not only for logical polarization filtering, but can also be tailored to output an arbitrary transverse beam profile. The lattice configurations are found using a recently proposed parallel tabu search algorithm for combinatorial optimization problems in integrated photonics.

  14. Adaptive filtering and change detection

    CERN Document Server

    Gustafsson, Fredrik

    2003-01-01

    Adaptive filtering is a classical branch of digital signal processing (DSP). Industrial interest in adaptive filtering grows continuously with the increase in computer performance that allows ever more conplex algorithms to be run in real-time. Change detection is a type of adaptive filtering for non-stationary signals and is also the basic tool in fault detection and diagnosis. Often considered as separate subjects Adaptive Filtering and Change Detection bridges a gap in the literature with a unified treatment of these areas, emphasizing that change detection is a natural extensi

  15. Filter selection using genetic algorithms

    Science.gov (United States)

    Patel, Devesh

    1996-03-01

    Convolution operators act as matched filters for certain types of variations found in images and have been extensively used in the analysis of images. However, filtering through a bank of N filters generates N filtered images, consequently increasing the amount of data considerably. Moreover, not all these filters have the same discriminatory capabilities for the individual images, thus making the task of any classifier difficult. In this paper, we use genetic algorithms to select a subset of relevant filters. Genetic algorithms represent a class of adaptive search techniques where the processes are similar to natural selection of biological evolution. The steady state model (GENITOR) has been used in this paper. The reduction of filters improves the performance of the classifier (which in this paper is the multi-layer perceptron neural network) and furthermore reduces the computational requirement. In this study we use the Laws filters which were proposed for the analysis of texture images. Our aim is to recognize the different textures on the images using the reduced filter set.

  16. Kalman filtering implementation with Matlab

    OpenAIRE

    Kleinbauer, Rachel

    2004-01-01

    1960 und 1961 veröffentlichte Rudolf Emil Kalmen seine Arbeiten über einen rekursiven prädiktiven Filter, der auf dem Gebrauch von rekursiven Algorithmen basiert. Damit revolutionierte er das Feld der Schätzverfahren. Seitdem ist der sogenannte Kalman Filter Gegenstand ausführlicher Forschung und findet bis heute Anwendung in zahlreichen Gebieten. Der Kalman Filter schätzt den Zustand eines dynamischen Systems, auch wenn die exakte Form dieses Systems unbekannt ist. Der Filter ist sehr lei...

  17. The intractable cigarette 'filter problem'.

    Science.gov (United States)

    Harris, Bradford

    2011-05-01

    When lung cancer fears emerged in the 1950s, cigarette companies initiated a shift in cigarette design from unfiltered to filtered cigarettes. Both the ineffectiveness of cigarette filters and the tobacco industry's misleading marketing of the benefits of filtered cigarettes have been well documented. However, during the 1950s and 1960s, American cigarette companies spent millions of dollars to solve what the industry identified as the 'filter problem'. These extensive filter research and development efforts suggest a phase of genuine optimism among cigarette designers that cigarette filters could be engineered to mitigate the health hazards of smoking. This paper explores the early history of cigarette filter research and development in order to elucidate why and when seemingly sincere filter engineering efforts devolved into manipulations in cigarette design to sustain cigarette marketing and mitigate consumers' concerns about the health consequences of smoking. Relevant word and phrase searches were conducted in the Legacy Tobacco Documents Library online database, Google Patents, and media and medical databases including ProQuest, JSTOR, Medline and PubMed. 13 tobacco industry documents were identified that track prominent developments involved in what the industry referred to as the 'filter problem'. These reveal a period of intense focus on the 'filter problem' that persisted from the mid-1950s to the mid-1960s, featuring collaborations between cigarette producers and large American chemical and textile companies to develop effective filters. In addition, the documents reveal how cigarette filter researchers' growing scientific knowledge of smoke chemistry led to increasing recognition that filters were unlikely to offer significant health protection. One of the primary concerns of cigarette producers was to design cigarette filters that could be economically incorporated into the massive scale of cigarette production. The synthetic plastic cellulose acetate

  18. Particle Kalman Filtering: A Nonlinear Framework for Ensemble Kalman Filters

    KAUST Repository

    Hoteit, Ibrahim

    2010-09-19

    Optimal nonlinear filtering consists of sequentially determining the conditional probability distribution functions (pdf) of the system state, given the information of the dynamical and measurement processes and the previous measurements. Once the pdfs are obtained, one can determine different estimates, for instance, the minimum variance estimate, or the maximum a posteriori estimate, of the system state. It can be shown that, many filters, including the Kalman filter (KF) and the particle filter (PF), can be derived based on this sequential Bayesian estimation framework. In this contribution, we present a Gaussian mixture‐based framework, called the particle Kalman filter (PKF), and discuss how the different EnKF methods can be derived as simplified variants of the PKF. We also discuss approaches to reducing the computational burden of the PKF in order to make it suitable for complex geosciences applications. We use the strongly nonlinear Lorenz‐96 model to illustrate the performance of the PKF.

  19. Application of DFT Filter Banks and Cosine Modulated Filter Banks in Filtering

    Science.gov (United States)

    Lin, Yuan-Pei; Vaidyanathan, P. P.

    1994-01-01

    None given. This is a proposal for a paper to be presented at APCCAS '94 in Taipei, Taiwan. (From outline): This work is organized as follows: Sec. II is devoted to the construction of the new 2m channel under-decimated DFT filter bank. Implementation and complexity of this DFT filter bank are discussed therein. IN a similar manner, the new 2m channel cosine modulated filter bank is discussed in Sec. III. Design examples are given in Sec. IV.

  20. Application of DFT Filter Banks and Cosine Modulated Filter Banks in Filtering

    Science.gov (United States)

    Lin, Yuan-Pei; Vaidyanathan, P. P.

    1994-01-01

    None given. This is a proposal for a paper to be presented at APCCAS '94 in Taipei, Taiwan. (From outline): This work is organized as follows: Sec. II is devoted to the construction of the new 2m channel under-decimated DFT filter bank. Implementation and complexity of this DFT filter bank are discussed therein. IN a similar manner, the new 2m channel cosine modulated filter bank is discussed in Sec. III. Design examples are given in Sec. IV.

  1. Bridging the ensemble Kalman filter and particle filters: the adaptive Gaussian mixture filter

    OpenAIRE

    Stordal, Andreas Størksen; Karlsen, Hans A.; Nævdal, Geir; Hans J. Skaug; Vallès, Brice

    2010-01-01

    The nonlinear filtering problem occurs in many scientific areas. Sequential Monte Carlo solutions with the correct asymptotic behavior such as particle filters exist, but they are computationally too expensive when working with high-dimensional systems. The ensemble Kalman filter (EnKF) is a more robust method that has shown promising results with a small sample size, but the samples are not guaranteed to come from the true posterior distribution. By approximating the model error with a Gauss...

  2. Digital Filters Using Identical Blocks

    Directory of Open Access Journals (Sweden)

    S. C. Dutta

    1985-07-01

    Full Text Available Improved response of non-recursive digital filters is achieved using Amplitude Change Functions (ACFs on a prototype filter. A generalized ACF with interesting properties is suggested. Methods for achieving variable cut-off frequency and frequency transformation are explained. A modular hardware implementation is also presented.

  3. Digital filter synthesis computer program

    Science.gov (United States)

    Moyer, R. A.; Munoz, R. M.

    1968-01-01

    Digital filter synthesis computer program expresses any continuous function of a complex variable in approximate form as a computational algorithm or difference equation. Once the difference equation has been developed, digital filtering can be performed by the program on any input data list.

  4. Polarizing Filter for Integrated Optics

    Science.gov (United States)

    Ramer, O. G.; Goss, W. C.; Goldstein, R.

    1986-01-01

    Polarizing filter for titanium-doped lithium niobate light waveguide suppresses transverse magnetic (TM) mode of light propagation while allowing transverse electric (TE) mode to continue on its way. Filter - lithium niobate crystal - is expected to find many applications in integrated optical circuits.

  5. Filter-extruded liposomes revisited

    DEFF Research Database (Denmark)

    Hinna, Askell; Steiniger, Frank; Hupfeld, Stefan;

    2016-01-01

    Filter-extrusion is a widely used technique for down-sizing of phospholipid vesicles. In order to gain a detailed insight into size and size distributions of filter-extruded vesicles composed of egg phosphatidyl-choline (with varying fractions of cholesterol) – in relation to extrusionparameters...

  6. Cold Crystal Reflector Filter Concept

    CERN Document Server

    Muhrer, G

    2014-01-01

    In this paper the theoretical concept of a cold crystal reflector filter will be presented. The aim of this concept is to balance the shortcoming of the traditional cold polycrystalline reflector filter, which lies in the significant reduction of the neutron flux right above (in energy space) or right below (wavelength space) the first Bragg edge.

  7. Tracking speckle displacement by double Kalman filtering

    Institute of Scientific and Technical Information of China (English)

    Donghui Li; Li Guo

    2006-01-01

    @@ A tracking technique using two sequentially-connected Kalman filter for tracking laser speckle displacement is presented. One Kalman filter tracks temporal speckle displacement, while another Kalman filter tracks spatial speckle displacement. The temporal Kalman filter provides a prior for the spatial Kalman filter, and the spatial Kalman filter provides measurements for the temporal Kalman filter. The contribution of a prior to estimations of the spatial Kalman filter is analyzed. An optical analysis system was set up to verify the double-Kalman-filter tracker's ability of tracking laser speckle's constant displacement.

  8. Recycling used automotive oil filters

    Science.gov (United States)

    Peaslee, Kent D.

    1994-02-01

    Over 400 million used automotive oil filters are discarded in the United States each year, most of which are disposed of in landfills wasting valuable resources and risking contamination of ground- and surface-water supplies. This article summarizes U.S. bureau of Mines research evaluating scrap prepared from used automotive oil filters. Experimental results show that crushed and drained oil filters have a bulk density that is higher than many typical scrap grades, a chemical analysis low in residual elements (except tin due to use of tin plate in filters), and an overall yield, oil-filter scrap to cast steel, of 76% to 85%, depending on the method used to prepare the scrap.

  9. Identification Filtering with fuzzy estimations

    Directory of Open Access Journals (Sweden)

    J.J Medel J

    2012-10-01

    Full Text Available A digital identification filter interacts with an output reference model signal known as a black-box output system. The identification technique commonly needs the transition and gain matrixes. Both estimation cases are based on mean square criterion obtaining of the minimum output error as the best estimation filtering. The evolution system represents adaptive properties that the identification mechanism includes considering the fuzzy logic strategies affecting in probability sense the evolution identification filter. The fuzzy estimation filter allows in two forms describing the transition and the gain matrixes applying actions that affect the identification structure. Basically, the adaptive criterion conforming the inference mechanisms set, the Knowledge and Rule bases, selecting the optimal coefficients in distribution form. This paper describes the fuzzy strategies applied to the Kalman filter transition function, and gain matrixes. The simulation results were developed using Matlab©.

  10. DSP Control of Line Hybrid Active Filter

    DEFF Research Database (Denmark)

    Dan, Stan George; Benjamin, Doniga Daniel; Magureanu, R.;

    2005-01-01

    Active Power Filters have been intensively explored in the past decade. Hybrid active filters inherit the efficiency of passive filters and the improved performance of active filters, and thus constitute a viable improved approach for harmonic compensation. In this paper a parallel hybrid filter ...

  11. Purification and partial characterization of a fructose-binding lectin from the leaves of Euphorbia helioscopia.

    Science.gov (United States)

    Rafiq, Shaista; Qadir, Sakeena; Wani, Ishfak Hussain; Ganie, Showkat Ahmad; Masood, Akbar; Hamid, Rabia

    2014-11-01

    A lectin was purified from leaves of Euphorbia helioscopia, by a combination of ion-exchange and gel filtration chromatography. On ion exchange using a DEAE- cellulose column in 0.2 M phosphate buffer, pH 7.2, the bound protein was eluted with a linear sodium chloride gradient of 0.1 M to 0.5 M. Further purification of the lectin was achieved by gel filtration on Sephadex G-100. Euphorbia helioscopia lectin (EHL) agglutinates only chick erythrocytes, showing no agglutination of all human blood group erythrocytes. The EHL induced hemagglutination is inhibited by fructose. The purified protein showed one band, both in non-denaturing PAGE and SDS-PAGE establishing the charge and size homogeneities of the lectin preparation. The molecular mass of the lectin as indicated by SDS-PAGE was approximately 31 kDa and that estimated from G-100 gel filtration chromatography was about 65 kDa establishing that the lectin is a homodimer. The lectin was stable within a temperature range of 0°C-40°C and exhibited a narrow range of pH stability, being optimally active at around pH 7. EHL also possesses antimicrobial activity and is an inhibitor of bacterial growth particularly Pseudomonas aeruginosa, Klebsiella pneumoniae and Escherichia coli.

  12. Analyzing binding data.

    Science.gov (United States)

    Motulsky, Harvey J; Neubig, Richard R

    2010-07-01

    Measuring the rate and extent of radioligand binding provides information on the number of binding sites, and their affinity and accessibility of these binding sites for various drugs. This unit explains how to design and analyze such experiments.

  13. Sensory Pollution from Bag Filters, Carbon Filters and Combinations

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Clausen, Geo; Weschler, Charles J.

    2008-01-01

    Used ventilation filters are a major source of sensory pollutants in air handling systems. The objective of the present study was to evaluate the net effect that different combinations of filters had on perceived air quality after 5 months of continuous filtration of outdoor suburban air. A panel....... Furthermore, its pressure drop changed very little during the 5 months of service, and it had the added benefit of removing a large fraction of ozone from the airstream. If similar results are obtained over a wider variety of soiling conditions, such filters may be a viable solution to a long recognized...

  14. Advanced Filtering Techniques Applied to Spaceflight Project

    Data.gov (United States)

    National Aeronautics and Space Administration — IST-Rolla developed two nonlinear filters for spacecraft orbit determination during the Phase I contract. The theta-D filter and the cost based filter, CBF, were...

  15. Shunt Active Filter in Damping Harmonics Propagation

    Directory of Open Access Journals (Sweden)

    BERBAOUI, B.

    2010-08-01

    Full Text Available This paper deals with a hybrid shunt active power filter applied on 500 kV HVDC, after a description of the causes and effects harmonic pollution which may damage equipments and interrupt electric power customers service; in this paper we present the deferent solutions of this problem among one has to study the two most recent types of filtering: passive and hybrid filter. The hybrid filter consists of active filter connected in shunt with passive filter. The hybrid shunt active filter proposed is based on three levels PWM inverter and characterized by detecting the harmonic current flowing into the passive filter and controlled by notch algorithm. This structure has been applied on a test HVDC power system, is presented as a technical solution makes it possible to eliminate the disadvantages from passive filtering, and also economic price of active filtering part. The simulation results justified the effectiveness of this type of filter face of the classic passive filter.

  16. Nanophotonic filters for digital imaging

    Science.gov (United States)

    Walls, Kirsty

    There has been an increasing demand for low cost, portable CMOS image sensors because of increased integration, and new applications in the automotive, mobile communication and medical industries, amongst others. Colour reproduction remains imperfect in conventional digital image sensors, due to the limitations of the dye-based filters. Further improvement is required if the full potential of digital imaging is to be realised. In alternative systems, where accurate colour reproduction is a priority, existing equipment is too bulky for anything but specialist use. In this work both these issues are addressed by exploiting nanophotonic techniques to create enhanced trichromatic filters, and multispectral filters, all of which can be fabricated on-chip, i.e. integrated into a conventional digital image sensor, to create compact, low cost, mass produceable imaging systems with accurate colour reproduction. The trichromatic filters are based on plasmonic structures. They exploit the excitation of surface plasmon resonances in arrays of subwavelength holes in metal films to filter light. The currently-known analytical expressions are inadequate for optimising all relevant parameters of a plasmonic structure. In order to obtain arbitrary filter characteristics, an automated design procedure was developed that integrated a genetic algorithm and 3D finite-difference time-domain tool. The optimisation procedure's efficacy is demonstrated by designing a set of plasmonic filters that replicate the CIE (1931) colour matching functions, which themselves mimic the human eye's daytime colour response.

  17. Simulasi Perancangan Filter Analog dengan Respon Chebyshev

    Directory of Open Access Journals (Sweden)

    RUSTAMAJI RUSTAMAJI

    2016-02-01

    Full Text Available Abstrak Dalam suatu sistem komunikasi penggunaan rangkaian filter sangat penting. Salah satu cara untuk memudahkan dalam perancangan sebuah filter dilakukanlah teknik simulasi. Penelitian ini bertujuan untuk merancang simulasi yang menghasilkan respon filter jenis chebyshev serta menghasilkan nilai komponen induktor (L dan kapasitor (C yang dibutuhkan untuk merangkai filter. Simulasi yang dirancang pada penelitian ini menggunakan Graphical User Interface (GUI. Dari simulasi yang dilakukan, didapatkan respon Chebyshev pada low pass filter, high pass filter, band pass filter, dan band stop filter sudah sesuai dengan input yang dimasukkan ke dalam parameter program dan sesuai dengan teori respon filter Chebyshev. Hasil Simulasi dari rangkaian band pass filter dan band stop filter dengan menggunakan Electronic Workbench (EWB, menunjukkan respon dengan pergeseran frekuensi sebesar 0,1 kHz lebih tinggi dari frekuensi yang diharapkan. Kata Kunci :filter, Chebyshev, band, respon frekuensi.   Abstract On communication system using filter is very important. One way to simplify the design of filter undertaken a simulation technique. This research aims to design a simulation that generates the filter response of chebyshev and generate the value component of the inductor (L and capacitor (C that needed for constructing the filter. This Simulation using Graphical User Interface (GUI. From result simulation, response in low pass filter, high pass filter, band pass filter, band stop filter and is in compliance with the input entered into the program and in accordance with the theory of Chebyshev filter response. The simulation of the band pass filter and bands stop filter by using electronic workbench ( EWB , show a response with shifts frequency of 0.1 khz higher than frequency expected.   Keywords: filter, Chebyshev, band, frequency respons

  18. Pragmatic circuits signals and filters

    CERN Document Server

    Eccles, William

    2006-01-01

    Pragmatic Circuits: Signals and Filters is built around the processing of signals. Topics include spectra, a short introduction to the Fourier series, design of filters, and the properties of the Fourier transform. The focus is on signals rather than power. But the treatment is still pragmatic. For example, the author accepts the work of Butterworth and uses his results to design filters in a fairly methodical fashion. This third of three volumes finishes with a look at spectra by showing how to get a spectrum even if a signal is not periodic. The Fourier transform provides a way of dealing wi

  19. Tunable Imaging Filters in Astronomy

    CERN Document Server

    Bland-Hawthorn, J

    2000-01-01

    While tunable filters are a recent development in night time astronomy, they have long been used in other physical sciences, e.g. solar physics, remote sensing and underwater communications. With their ability to tune precisely to a given wavelength using a bandpass optimized for the experiment, tunable filters are already producing some of the deepest narrowband images to date of astrophysical sources. Furthermore, some classes of tunable filters can be used in fast telescope beams and therefore allow for narrowband imaging over angular fields of more than a degree over the sky.

  20. Simplified design of filter circuits

    CERN Document Server

    Lenk, John

    1999-01-01

    Simplified Design of Filter Circuits, the eighth book in this popular series, is a step-by-step guide to designing filters using off-the-shelf ICs. The book starts with the basic operating principles of filters and common applications, then moves on to describe how to design circuits by using and modifying chips available on the market today. Lenk's emphasis is on practical, simplified approaches to solving design problems.Contains practical designs using off-the-shelf ICsStraightforward, no-nonsense approachHighly illustrated with manufacturer's data sheets

  1. Properties of ceramic candle filters

    Energy Technology Data Exchange (ETDEWEB)

    Pontius, D.H.

    1995-06-01

    The mechanical integrity of ceramic filter elements is a key issue for hot gas cleanup systems. To meet the demands of the advanced power systems, the filter components must sustain the thermal stresses of normal operations (pulse cleaning), of start-up and shut-down conditions, and of unanticipated process upsets such as excessive ash accumulation without catastrophic failure. They must also survive the various mechanical loads associated with handling and assembly, normal operation, and process upsets. For near-term filter systems, these elements must survive at operating temperatures of 1650{degrees}F for three years.

  2. Nonlinear Filtering and Approximation Techniques

    Science.gov (United States)

    1988-10-01

    e par des iquations de dimension finie, les 6quations du filtre de Kalman : X +h~pklk Xk=(1 + bAt).kk..I + e2+h2 pl_(k - h( + b~t)Xk-... (6 -kIj (1...Equation. 3. Piecewise Linear Filtering with Small Observation Noise. 4. Filtres Approches pour un Probleme de Fitrage Nonlineaire Discretise avec Petit...finite dimensional solution, namely the Kalman filter (which is the extended Kalman filter for (0.1) ). The above considerations tend to indicate that

  3. ADVANCED HOT GAS FILTER DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    E.S. Connolly; G.D. Forsythe

    2000-09-30

    DuPont Lanxide Composites, Inc. undertook a sixty-month program, under DOE Contract DEAC21-94MC31214, in order to develop hot gas candle filters from a patented material technology know as PRD-66. The goal of this program was to extend the development of this material as a filter element and fully assess the capability of this technology to meet the needs of Pressurized Fluidized Bed Combustion (PFBC) and Integrated Gasification Combined Cycle (IGCC) power generation systems at commercial scale. The principal objective of Task 3 was to build on the initial PRD-66 filter development, optimize its structure, and evaluate basic material properties relevant to the hot gas filter application. Initially, this consisted of an evaluation of an advanced filament-wound core structure that had been designed to produce an effective bulk filter underneath the barrier filter formed by the outer membrane. The basic material properties to be evaluated (as established by the DOE/METC materials working group) would include mechanical, thermal, and fracture toughness parameters for both new and used material, for the purpose of building a material database consistent with what is being done for the alternative candle filter systems. Task 3 was later expanded to include analysis of PRD-66 candle filters, which had been exposed to actual PFBC conditions, development of an improved membrane, and installation of equipment necessary for the processing of a modified composition. Task 4 would address essential technical issues involving the scale-up of PRD-66 candle filter manufacturing from prototype production to commercial scale manufacturing. The focus would be on capacity (as it affects the ability to deliver commercial order quantities), process specification (as it affects yields, quality, and costs), and manufacturing systems (e.g. QA/QC, materials handling, parts flow, and cost data acquisition). Any filters fabricated during this task would be used for product qualification tests

  4. Concrete ensemble Kalman filters with rigorous catastrophic filter divergence.

    Science.gov (United States)

    Kelly, David; Majda, Andrew J; Tong, Xin T

    2015-08-25

    The ensemble Kalman filter and ensemble square root filters are data assimilation methods used to combine high-dimensional, nonlinear dynamical models with observed data. Ensemble methods are indispensable tools in science and engineering and have enjoyed great success in geophysical sciences, because they allow for computationally cheap low-ensemble-state approximation for extremely high-dimensional turbulent forecast models. From a theoretical perspective, the dynamical properties of these methods are poorly understood. One of the central mysteries is the numerical phenomenon known as catastrophic filter divergence, whereby ensemble-state estimates explode to machine infinity, despite the true state remaining in a bounded region. In this article we provide a breakthrough insight into the phenomenon, by introducing a simple and natural forecast model that transparently exhibits catastrophic filter divergence under all ensemble methods and a large set of initializations. For this model, catastrophic filter divergence is not an artifact of numerical instability, but rather a true dynamical property of the filter. The divergence is not only validated numerically but also proven rigorously. The model cleanly illustrates mechanisms that give rise to catastrophic divergence and confirms intuitive accounts of the phenomena given in past literature.

  5. Concrete ensemble Kalman filters with rigorous catastrophic filter divergence

    Science.gov (United States)

    Kelly, David; Majda, Andrew J.; Tong, Xin T.

    2015-01-01

    The ensemble Kalman filter and ensemble square root filters are data assimilation methods used to combine high-dimensional, nonlinear dynamical models with observed data. Ensemble methods are indispensable tools in science and engineering and have enjoyed great success in geophysical sciences, because they allow for computationally cheap low-ensemble-state approximation for extremely high-dimensional turbulent forecast models. From a theoretical perspective, the dynamical properties of these methods are poorly understood. One of the central mysteries is the numerical phenomenon known as catastrophic filter divergence, whereby ensemble-state estimates explode to machine infinity, despite the true state remaining in a bounded region. In this article we provide a breakthrough insight into the phenomenon, by introducing a simple and natural forecast model that transparently exhibits catastrophic filter divergence under all ensemble methods and a large set of initializations. For this model, catastrophic filter divergence is not an artifact of numerical instability, but rather a true dynamical property of the filter. The divergence is not only validated numerically but also proven rigorously. The model cleanly illustrates mechanisms that give rise to catastrophic divergence and confirms intuitive accounts of the phenomena given in past literature. PMID:26261335

  6. e-FILTERS OF MS-ALGEBRAS

    Institute of Scientific and Technical Information of China (English)

    M.Sambasiva RAO

    2013-01-01

    The notion of e-filters is introduced in an MS-algebra and characterized.The concept of D-filters is introduced and a set of equivalent conditions under which every D-filter is an e-filter are given.The properties of the space of all prime e-filters of an MS-algebra are observed.The concept of D-prime filters is introduced and then a set of equivalent conditions are derived for a prime e-filter to become a D-prime filter in topological terms.

  7. Digital filtering: background and tutorial for psychophysiologists.

    Science.gov (United States)

    Cook, E W; Miller, G A

    1992-05-01

    Digital filtering offers more to psychophysiologists than is commonly appreciated. An introduction is offered here to foster the explicit design and use of digital filters. Because of considerable confusion in the literature about terminology important to both analog and digital filtering, basic concepts are reviewed and clarified. Because some time series concepts are fundamental to digital filtering, these are also presented. Examples of filters commonly used in psychophysiology are given, and procedures are presented for the design and use of one type of digital filter. Properties of some types of digital filters are described, and the relative advantages of simple analog and digital filters are discussed.

  8. Matched Spectral Filter Imager Project

    Data.gov (United States)

    National Aeronautics and Space Administration — OPTRA proposes the development of an imaging spectrometer for greenhouse gas and volcanic gas imaging based on matched spectral filtering and compressive imaging....

  9. Integrated Spatial Filter Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA Earth Science Division need for spatial filter arrays for amplitude and wavefront control, Luminit proposes to develop a novel Integrated Spatial...

  10. Biometric verification with correlation filters

    Science.gov (United States)

    Vijaya Kumar, B. V. K.; Savvides, Marios; Xie, Chunyan; Venkataramani, Krithika; Thornton, Jason; Mahalanobis, Abhijit

    2004-01-01

    Using biometrics for subject verification can significantly improve security over that of approaches based on passwords and personal identification numbers, both of which people tend to lose or forget. In biometric verification the system tries to match an input biometric (such as a fingerprint, face image, or iris image) to a stored biometric template. Thus correlation filter techniques are attractive candidates for the matching precision needed in biometric verification. In particular, advanced correlation filters, such as synthetic discriminant function filters, can offer very good matching performance in the presence of variability in these biometric images (e.g., facial expressions, illumination changes, etc.). We investigate the performance of advanced correlation filters for face, fingerprint, and iris biometric verification.

  11. Stochastic processes and filtering theory

    CERN Document Server

    Jazwinski, Andrew H

    2007-01-01

    This unified treatment of linear and nonlinear filtering theory presents material previously available only in journals, and in terms accessible to engineering students. Its sole prerequisites are advanced calculus, the theory of ordinary differential equations, and matrix analysis. Although theory is emphasized, the text discusses numerous practical applications as well.Taking the state-space approach to filtering, this text models dynamical systems by finite-dimensional Markov processes, outputs of stochastic difference, and differential equations. Starting with background material on probab

  12. Aquatic Plants Aid Sewage Filter

    Science.gov (United States)

    Wolverton, B. C.

    1985-01-01

    Method of wastewater treatment combines micro-organisms and aquatic plant roots in filter bed. Treatment occurs as liquid flows up through system. Micro-organisms, attached themselves to rocky base material of filter, act in several steps to decompose organic matter in wastewater. Vascular aquatic plants (typically, reeds, rushes, cattails, or water hyacinths) absorb nitrogen, phosphorus, other nutrients, and heavy metals from water through finely divided roots.

  13. Q value analysis of microwave photonic filters

    Institute of Scientific and Technical Information of China (English)

    Lina ZHOU; Xinliang ZHANG; Enming XU

    2009-01-01

    This paper first presents the fundamental principles of the microwave photonic filters.As an example to explain how to implement a microwave photonic filter, a specific finite impulse response (FIR) filter is illustrated.Next, the Q value of the microwave photonic filters is analyzed theoretically, and methods around how to gain high Q value are discussed.Then,divided into FIR filter, first-order infinite impulse response (IIR) filter, and multi-order IIR filter, several novel microwave photonic filters with high Q value are listed and compared.The technical difficulties to get high Q value in first-order IIR filter and multi-order IIR filter are analyzed concretely.Finally, in order to gain higher Q value, a multi-order IIR microwave photonic filter that easily extends its order is presented and discussed.

  14. Filtering algorithms using shiftable kernels

    CERN Document Server

    Chaudhury, Kunal Narayan

    2011-01-01

    It was recently demonstrated in [4][arxiv:1105.4204] that the non-linear bilateral filter \\cite{Tomasi} can be efficiently implemented using an O(1) or constant-time algorithm. At the heart of this algorithm was the idea of approximating the Gaussian range kernel of the bilateral filter using trigonometric functions. In this letter, we explain how the idea in [4] can be extended to few other linear and non-linear filters [18,21,2]. While some of these filters have received a lot of attention in recent years, they are known to be computationally intensive. To extend the idea in \\cite{Chaudhury2011}, we identify a central property of trigonometric functions, called shiftability, that allows us to exploit the redundancy inherent in the filtering operations. In particular, using shiftable kernels, we show how certain complex filtering can be reduced to simply that of computing the moving sum of a stack of images. Each image in the stack is obtained through an elementary pointwise transform of the input image. Thi...

  15. A taxonomy fuzzy filtering approach

    Directory of Open Access Journals (Sweden)

    Vrettos S.

    2003-01-01

    Full Text Available Our work proposes the use of topic taxonomies as part of a filtering language. Given a taxonomy, a classifier is trained for each one of its topics. The user is able to formulate logical rules combining the available topics, e.g. (Topic1 AND Topic2 OR Topic3, in order to filter related documents in a stream. Using the trained classifiers, every document in the stream is assigned a belief value of belonging to the topics of the filter. These belief values are then aggregated using logical operators to yield the belief to the filter. In our study, Support Vector Machines and Naïve Bayes classifiers were used to provide topic probabilities. Aggregation of topic probabilities based on fuzzy logic operators was found to improve filtering performance on the Renters text corpus, as compared to the use of their Boolean counterparts. Finally, we deployed a filtering system on the web using a sample taxonomy of the Open Directory Project.

  16. Energetics of ion competition in the DEKA selectivity filter of neuronal sodium channels

    Directory of Open Access Journals (Sweden)

    D. Boda

    2015-03-01

    Full Text Available The energetics of ionic selectivity in the neuronal sodium channels is studied. A simple model constructed for the selectivity filter of the channel is used. The selectivity filter of this channel type contains aspartate (D, glutamate (E, lysine (K, and alanine (A residues (the DEKA locus. We use Grand Canonical Monte Carlo simulations to compute equilibrium binding selectivity in the selectivity filter and to obtain various terms of the excess chemical potential from a particle insertion procedure based on Widom's method. We show that K+ ions in competition with Na+ are efficiently excluded from the selectivity filter due to entropic hard sphere exclusion. The dielectric constant of protein has no effect on this selectivity. Ca2+ ions, on the other hand, are excluded from the filter due to a free energetic penalty which is enhanced by the low dielectric constant of protein.

  17. Evaluating document filtering systems over time

    NARCIS (Netherlands)

    Kenter, T.; Balog, K.; de Rijke, M.

    2015-01-01

    Document filtering is a popular task in information retrieval. A stream of documents arriving over time is filtered for documents relevant to a set of topics. The distinguishing feature of document filtering is the temporal aspect introduced by the stream of documents. Document filtering systems, up

  18. CPHD filter derivation for extended targets

    CERN Document Server

    Orguner, Umut

    2010-01-01

    This document derives the CPHD filter for extended targets. Only the update step is derived here. Target generated measurements, false alarms and prior are all assumed to be independent identically distributed cluster processes. We also prove here that the derived CPHD filter for extended targets reduce to PHD filter for extended targets and CPHD filter for standard targets under suitable assumptions.

  19. Filter transient response to EEG waveforms.

    Science.gov (United States)

    Shirakawa, S; Smith, J R; Azumi, K

    1987-01-01

    The response of two types of linear filters to sinusoidal bursts was calculated to demonstrate how filters can distort EEG waveforms. Results show that the wider the filter bandwidth the less is the distortion, and for a given bandwidth, the higher the filter order the greater the distortion. The response of a linear phase filter was also calculated to demonstrate that this type of filter can also cause waveform distortion, although it is normally less than that caused by Butterworth, Tchebychev and elliptic filters.

  20. Novel Simplex Unscented Transform and Filter

    Institute of Scientific and Technical Information of China (English)

    Wan-Chun Li; Ping Wei; Xian-Ci Xiao

    2008-01-01

    In this paper, a new simplex unscented transform (UT) based Schmidt orthogonal algorithm and a new filter method based on this transform are proposed. This filter has less computation consumption than UKF (unscented Kalman filter), SUKF (simplex unscented Kalman filter) and EKF (extended Kalman filter). Computer simulation shows that this filter has the same performance as UKF and SUKF, and according to the analysis of the computational requirements of EKF, UKF and SUKF, this filter has preferable practicality value. Finally, the appendix shows the efficiency for this UT.

  1. Digital notch filter based active damping for LCL filters

    DEFF Research Database (Denmark)

    Yao, Wenli; Yang, Yongheng; Zhang, Xiaobin

    2015-01-01

    . In contrast, the active damping does not require any dissipation elements, and thus has become of increasing interest. As a result, a vast of active damping solutions have been reported, among which multi-loop control systems and additional sensors are necessary, leading to increased cost and complexity....... In this paper, a notch filter based active damping without the requirement of additional sensors is proposed, where the inverter current is employed as the feedback variable. Firstly, a design method of the notch filter for active damping is presented. The entire system stability has then been investigated...... in the z-domain. Simulations and experiments are carried out to verify the proposed active damping method. Both results have confirmed that the notch filter based active damping can ensure the entire system stability in the case of resonances with a good system performance....

  2. Numerical simulation of large fabric filter

    Directory of Open Access Journals (Sweden)

    Kovařík Petr

    2012-04-01

    Full Text Available Fabric filters are used in the wide range of industrial technologies for cleaning of incoming or exhaust gases. To achieve maximal efficiency of the discrete phase separation and long lifetime of the filter hoses, it is necessary to ensure uniform load on filter surface and to avoid impacts of heavy particles with high velocities to the filter hoses. The paper deals with numerical simulation of two phase flow field in a large fabric filter. The filter is composed of six chambers with approx. 1600 filter hoses in total. The model was simplified to one half of the filter, the filter hoses walls were substituted by porous zones. The model settings were based on experimental data, especially on the filter pressure drop. Unsteady simulations with different turbulence models were done. Flow field together with particles trajectories were analyzed. The results were compared with experimental observations.

  3. Numerical simulation of large fabric filter

    Science.gov (United States)

    Sedláček, Jan; Kovařík, Petr

    2012-04-01

    Fabric filters are used in the wide range of industrial technologies for cleaning of incoming or exhaust gases. To achieve maximal efficiency of the discrete phase separation and long lifetime of the filter hoses, it is necessary to ensure uniform load on filter surface and to avoid impacts of heavy particles with high velocities to the filter hoses. The paper deals with numerical simulation of two phase flow field in a large fabric filter. The filter is composed of six chambers with approx. 1600 filter hoses in total. The model was simplified to one half of the filter, the filter hoses walls were substituted by porous zones. The model settings were based on experimental data, especially on the filter pressure drop. Unsteady simulations with different turbulence models were done. Flow field together with particles trajectories were analyzed. The results were compared with experimental observations.

  4. Shielded multi-stage EMI noise filter

    Energy Technology Data Exchange (ETDEWEB)

    Kisner, Roger Allen; Fugate, David Lee

    2016-11-08

    Electromagnetic interference (EMI) noise filter embodiments and methods for filtering are provided herein. EMI noise filters include multiple signal exclusion enclosures. The multiple signal exclusion enclosures contain filter circuit stages. The signal exclusion enclosures can attenuate noise generated external to the enclosures and/or isolate noise currents generated by the corresponding filter circuits within the enclosures. In certain embodiments, an output of one filter circuit stage is connected to an input of the next filter circuit stage. The multiple signal exclusion enclosures can be chambers formed using conductive partitions to divide an outer signal exclusion enclosure. EMI noise filters can also include mechanisms to maintain the components of the filter circuit stages at a consistent temperature. For example, a metal base plate can distribute heat among filter components, and an insulating material can be positioned inside signal exclusion enclosures.

  5. Shielded multi-stage EMI noise filter

    Science.gov (United States)

    Kisner, Roger Allen; Fugate, David Lee

    2016-11-08

    Electromagnetic interference (EMI) noise filter embodiments and methods for filtering are provided herein. EMI noise filters include multiple signal exclusion enclosures. The multiple signal exclusion enclosures contain filter circuit stages. The signal exclusion enclosures can attenuate noise generated external to the enclosures and/or isolate noise currents generated by the corresponding filter circuits within the enclosures. In certain embodiments, an output of one filter circuit stage is connected to an input of the next filter circuit stage. The multiple signal exclusion enclosures can be chambers formed using conductive partitions to divide an outer signal exclusion enclosure. EMI noise filters can also include mechanisms to maintain the components of the filter circuit stages at a consistent temperature. For example, a metal base plate can distribute heat among filter components, and an insulating material can be positioned inside signal exclusion enclosures.

  6. A biological oil adsorption filter

    Energy Technology Data Exchange (ETDEWEB)

    Pasila, A. [University of Helsinki (Finland). Dept. of Agricultural Engineering and Household Technology

    2005-12-01

    A new oil adsorption method called adsorption filtration (AF) has been developed. It is a technology where by oil residues can be cleaned from water by running it through a simple filter made from freeze treated, dried, milled and then fragmented plant material. By choosing suitable plants and fragmentation sizes it is possible to produce filters, which pass water but adsorb oil. The aim of this study was to investigate the possibilities of manufacturing oil adsorbing filter materials from reed canary grass (Phalaris arundinacea), flax (Linum usitatissimum L.) or hemp fibre (Cannabis sativa L.). The oil (80 ml) was mixed with de-ionised water (200 ml) and this mixture was filtered through 10 or 20 g adsorption filters. Fine spring harvested hemp fibre (diameter less than 1 mm) and reed canary grass fragments adsorb 2-4 g of oil per gram of adsorption material compared to 1-3 g of water. Adsorption filtration is thus a novel way of gathering spilled oil in shallow coastal waters before the oil reaches the shore. (author)

  7. A biological oil adsorption filter.

    Science.gov (United States)

    Pasila, Antti

    2004-12-01

    A new oil adsorption method called adsorption filtration (AF) has been developed. It is a technology where by oil residues can be cleaned from water by running it through a simple filter made from freeze treated, dried, milled and then fragmented plant material. By choosing suitable plants and fragmentation sizes it is possible to produce filters, which pass water but adsorb oil. The aim of this study was to investigate the possibilities of manufacturing oil adsorbing filter materials from reed canary grass (Phalaris arundinacea), flax (Linum usitatissimum L.) or hemp fibre (Cannabis sativa L.). The oil (80 ml) was mixed with de-ionised water (200 ml) and this mixture was filtered through 10 or 20 g adsorption filters. Fine spring harvested hemp fibre (diameter less than 1 mm) and reed canary grass fragments adsorb 2-4 g of oil per gram of adsorption material compared to 1-3 g of water. Adsorption filtration is thus a novel way of gathering spilled oil in shallow coastal waters before the oil reaches the shore.

  8. GPU Accelerated Vector Median Filter

    Science.gov (United States)

    Aras, Rifat; Shen, Yuzhong

    2011-01-01

    Noise reduction is an important step for most image processing tasks. For three channel color images, a widely used technique is vector median filter in which color values of pixels are treated as 3-component vectors. Vector median filters are computationally expensive; for a window size of n x n, each of the n(sup 2) vectors has to be compared with other n(sup 2) - 1 vectors in distances. General purpose computation on graphics processing units (GPUs) is the paradigm of utilizing high-performance many-core GPU architectures for computation tasks that are normally handled by CPUs. In this work. NVIDIA's Compute Unified Device Architecture (CUDA) paradigm is used to accelerate vector median filtering. which has to the best of our knowledge never been done before. The performance of GPU accelerated vector median filter is compared to that of the CPU and MPI-based versions for different image and window sizes, Initial findings of the study showed 100x improvement of performance of vector median filter implementation on GPUs over CPU implementations and further speed-up is expected after more extensive optimizations of the GPU algorithm .

  9. Automated Integrated Analog Filter Design Issues

    OpenAIRE

    2015-01-01

    An analysis of modern automated integrated analog circuits design methods and their use in integrated filter design is done. Current modern analog circuits automated tools are based on optimization algorithms and/or new circuit generation methods. Most automated integrated filter design methods are only suited to gmC and switched current filter topologies. Here, an algorithm for an active RC integrated filter design is proposed, that can be used in automated filter designs. The algorithm is t...

  10. Optimal Nonlinear Filter for INS Alignment

    Institute of Scientific and Technical Information of China (English)

    赵瑞; 顾启泰

    2002-01-01

    All the methods to handle the inertial navigation system (INS) alignment were sub-optimal in the past. In this paper, particle filtering (PF) as an optimal method is used for solving the problem of INS alignment. A sub-optimal two-step filtering algorithm is presented to improve the real-time performance of PF. The approach combines particle filtering with Kalman filtering (KF). Simulation results illustrate the superior performance of these approaches when compared with extended Kalman filtering (EKF).

  11. Multiplier-free filters for wideband SAR

    DEFF Research Database (Denmark)

    Dall, Jørgen; Christensen, Erik Lintz

    2001-01-01

    This paper derives a set of parameters to be optimized when designing filters for digital demodulation and range prefiltering in SAR systems. Aiming at an implementation in field programmable gate arrays (FPGAs), an approach for the design of multiplier-free filters is outlined. Design results ar...... are presented in terms of filter complexity and performance. One filter has been coded in VHDL and preliminary results indicate that the filter can meet a 2 GHz input sample rate....

  12. Evolving Information Filtering for Personalized Information Service

    Institute of Scientific and Technical Information of China (English)

    田范江; 李丛蓉; 王鼎兴

    2001-01-01

    Information filtering (IF) systems are important for personalized information service. However, most current IF systems suffer from low quality and long training time. In this paper, a refined evolving information filtering method is presented. This method describes user's information need from multi-aspects and improves filtering quality through a process like natural selection. Experimental result shows this method can shorten training time, improve filtering quality, and reduce the relevance between filtering results and training sequence.

  13. Inferior vena cava filters in cancer patients: to filter or not to filter

    Directory of Open Access Journals (Sweden)

    Hikmat Abdel-Razeq

    2011-03-01

    Full Text Available Hikmat Abdel-Razeq1, Asem Mansour2, Yousef Ismael1, Hazem Abdulelah11Department of Internal Medicine, 2Department of Radiology, King Hussein Cancer Center, Amman, JordanPurpose: Cancer and its treatment are recognized risk factors for venous thromboembolism (VTE; active cancer accounts for almost 20% of all newly diagnosed VTE. Inferior vena cava (IVC filters are utilized to provide mechanical thromboprophylaxis to prevent pulmonary embolism (PE or to avoid bleeding from systemic anticoagulation in high-risk situations. In this report, and utilizing a case study, we will address the appropriate utilization of such filters in cancer patients.Methods: The case of a 43-year-old female patient with rectal cancer, who developed deep vein thrombosis following a complicated medical course, will be presented. The patient was anticoagulated with a low molecular weight heparin, but a few months later and following an episode of bleeding, an IVC filter was planned. Using the PubMed database, articles published in English language addressing issues related to IVC filters in cancer patients were accessed and will be presented.Results: Many recent studies questioned the need to insert IVC filters in advanced-stage cancer patients, particularly those whose anticipated survival is short and prevention of PE may be of little clinical benefit and could be a poor utilization of resources.Conclusion: Systemic anticoagulation can be safely offered for the majority of cancer patients. When the risk of bleeding or pulmonary embolism is high, IVC filters can be utilized. However, placement of such filters should take into consideration the stage of disease and life expectancy of such patients.Keywords: anticoagulation, bleeding, chemotherapy

  14. Sensory pollution from bag-type fiberglass ventilation filters: Conventional filter compared with filters containing various amounts of activated carbon

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Fadeyi, M.O.; Clausen, Geo

    2009-01-01

    (100 g/m(2)). Each filter was weighed at the beginning of the soiling period and after 3 and 6 months of service. Additionally, up- and down-stream ozone concentrations and filter pressure drops were measured monthly. Following 6 months of service, the air downstream of each of the combination filters......As ventilation filters accumulate particles removed from the airstream, they become emitters of sensory pollutants that degrade indoor air quality. Previously we demonstrated that an F7 bag-type filter that incorporates activated carbon (a "combination filter") reduces this adverse effect compared...... to an equivalent filter without carbon. The aim of the present study was to examine how the amount of activated carbon (AC) used in combination filters affects their ability to remove both sensory offending pollutants and ozone. A panel evaluated the air downstream of four different filters after each had...

  15. Design of SVD/SGK Convolution Filters for Image Processing

    Science.gov (United States)

    1980-01-01

    of filters by transforming one-dimensional linear phase filters * into two-dimensional linear phase filters . By assuming that the prototype filter is a...linear phase filter , his algorithm transforms a one-dimensional filter h(u) into a two-dimensional filter W (u,v) by means of transformation given by...significance of their implementation of the designed filter is that a large two-dimensional convolution *A linear phase filter implies symmetry of the filter. 13

  16. Radiant zone heated particulate filter

    Science.gov (United States)

    Gonze, Eugene V [Pinckney, MI

    2011-12-27

    A system includes a particulate matter (PM) filter including an upstream end for receiving exhaust gas and a downstream end. A radiant zoned heater includes N zones, where N is an integer greater than one, wherein each of the N zones includes M sub-zones, where M is an integer greater than or equal to one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones, restricts exhaust gas flow in a portion of the PM filter that corresponds to the selected one of the N zones, and deactivates non-selected ones of the N zones.

  17. Applications of nonwoven filter media

    Energy Technology Data Exchange (ETDEWEB)

    1988-11-01

    The multi-client technical and marketing report, Nonwovens in Filtration (1987) World Wide, has been completed by Filter Media Consulting, Inc. According to this 450-page report, $818 million in sales worldwide in nonwoven filter media represents a substantial segment of the entire nonwoven market. This total is mainly roll goods with a few exceptions. Meltblown composites represent $108 million, 13% of the total, and is the fastest growing segment as compared to needled felts, dry formed, thermobonded, spunbonded, wet laid and other unique processes, all extensively covered in this report. Included are 20 filtration applications covered in 190 pages, such as baghouse and dust filtration, Torit-type cartridge filters, HEPA/ULPA filtration, and heating, ventilation and air conditioning. Major markets are addressed, and trends in different fields are highlighted throughout the report.

  18. Quantum Diffusion, Measurement and Filtering

    CERN Document Server

    Belavkin, V P

    1993-01-01

    A brief presentation of the basic concepts in quantum probability theory is given in comparison to the classical one. The notion of quantum white noise, its explicit representation in Fock space, and necessary results of noncommutative stochastic analysis and integration are outlined. Algebraic differential equations that unify the quantum non Markovian diffusion with continuous non demolition observation are derived. A stochastic equation of quantum diffusion filtering generalising the classical Markov filtering equation to the quantum flows over arbitrary *-algebra is obtained. A Gaussian quantum diffusion with one dimensional continuous observation is considered.The a posteriori quantum state difusion in this case is reduced to a linear quantum stochastic filter equation of Kalman-Bucy type and to the operator Riccati equation for quantum correlations. An example of continuous nondemolition observation of the coordinate of a free quantum particle is considered, describing a continuous collase to the statio...

  19. Adaptive filtering prediction and control

    CERN Document Server

    Goodwin, Graham C

    2009-01-01

    Preface1. Introduction to Adaptive TechniquesPart 1. Deterministic Systems2. Models for Deterministic Dynamical Systems3. Parameter Estimation for Deterministic Systems4. Deterministic Adaptive Prediction5. Control of Linear Deterministic Systems6. Adaptive Control of Linear Deterministic SystemsPart 2. Stochastic Systems7. Optimal Filtering and Prediction8. Parameter Estimation for Stochastic Dynamic Systems9. Adaptive Filtering and Prediction10. Control of Stochastic Systems11. Adaptive Control of Stochastic SystemsAppendicesA. A Brief Review of Some Results from Systems TheoryB. A Summary o

  20. Tunable-Bandwidth Filter System

    Science.gov (United States)

    Aye, Tin; Yu, Kevin; Dimov, Fedor; Savant, Gajendra

    2006-01-01

    A tunable-bandwidth filter system (TBFS), now undergoing development, is intended to be part of a remote-sensing multispectral imaging system that will operate in the visible and near infrared spectral region (wavelengths from 400 to 900 nm). Attributes of the TBFS include rapid tunability of the pass band over a wide wavelength range and high transmission efficiency. The TBFS is based on a unique integration of two pairs of broadband Raman reflection holographic filters with two rotating spherical lenses. In experiments, a prototype of the TBFS was shown to be capable of spectral sampling of images in the visible range over a 200-nm spectral range with a spectral resolution of .30 nm. The figure depicts the optical layout of a prototype of the TBFS as part of a laboratory multispectral imaging system for the spectral sampling of color test images in two orthogonal polarizations. Each pair of broadband Raman reflection holographic filters is mounted at an equatorial plane between two halves of a spherical lens. The two filters in each pair are characterized by steep spectral slopes (equivalently, narrow spectral edges), no ripple or side lobes in their pass bands, and a few nanometers of non-overlapping wavelength range between their pass bands. Each spherical lens and thus the filter pair within it is rotated in order to rapidly tune its pass band. The rotations of the lenses are effected by electronically controlled, programmable, high-precision rotation stages. The rotations are coordinated by electronic circuits operating under overall supervision of a personal computer in order to obtain the desired variation of the overall pass bands with time. Embedding the filters inside the spherical lenses increases the range of the hologram incidence angles, making it possible to continuously tune the pass and stop bands of the filters over a wider wavelength range. In addition, each spherical lens also serves as part of the imaging optics: The telephoto lens focuses

  1. Summary of Martian Dust Filtering Challenges and Current Filter Development

    Science.gov (United States)

    O'Hara, William J., IV

    2017-01-01

    Traditional air particulate filtering in manned spaceflight (Apollo, Shuttle, ISS, etc.) has used cleanable or replaceable catch filters such as screens and High-Efficiency Particulate Arrestance (HEPA) filters. However, the human mission to Mars architecture will require a new approach. It is Martian dust that is the particulate of concern but the need also applies to particulates generated by crew. The Mars Exploration Program Analysis Group (MEPAG) high-lighted this concern in its Mars Science, Goals, Objectives, Investigations and Priorities document [7], by saying specifically that one high priority investigation will be to "Test ISRU atmospheric processing systems to measure resilience with respect to dust and other environmental challenge performance parameters that are critical to the design of a full-scale system." By stating this as high priority the MEPAG is acknowledging that developing and adequately verifying this capability is critical to success of a human mission to Mars. This architecture will require filtering capabilities that are highly reliable, will not restrict the flow path with clogging, and require little to no maintenance. This paper will summarize why this is the case, the general requirements for developing the technology, and the status of the progress made in this area.

  2. FPGA implementation of filtered image using 2D Gaussian filter

    Directory of Open Access Journals (Sweden)

    Leila kabbai

    2016-07-01

    Full Text Available Image filtering is one of the very useful techniques in image processing and computer vision. It is used to eliminate useless details and noise from an image. In this paper, a hardware implementation of image filtered using 2D Gaussian Filter will be present. The Gaussian filter architecture will be described using a different way to implement convolution module. Thus, multiplication is in the heart of convolution module, for this reason, three different ways to implement multiplication operations will be presented. The first way is done using the standard method. The second way uses Field Programmable Gate Array (FPGA features Digital Signal Processor (DSP to ensure and make fast the scalability of the effective FPGA resource and then to speed up calculation. The third way uses real multiplier for more precision and a the maximum uses of FPGA resources. In this paper, we compare the image quality of hardware (VHDL and software (MATLAB implementation using the Peak Signal-to-Noise Ratio (PSNR. Also, the FPGA resource usage for different sizes of Gaussian kernel will be presented in order to provide a comparison between fixed-point and floating point implementations.

  3. Membrane binding domains

    OpenAIRE

    Hurley, James H.

    2006-01-01

    Eukaryotic signaling and trafficking proteins are rich in modular domains that bind cell membranes. These binding events are tightly regulated in space and time. The structural, biochemical, and biophysical mechanisms for targeting have been worked out for many families of membrane binding domains. This review takes a comparative view of seven major classes of membrane binding domains, the C1, C2, PH, FYVE, PX, ENTH, and BAR domains. These domains use a combination of specific headgroup inter...

  4. Combining docking with pharmacophore filtering for improved virtual screening

    Directory of Open Access Journals (Sweden)

    Peach Megan L

    2009-05-01

    Full Text Available Abstract Background Virtual screening is used to distinguish potential leads from inactive compounds in a database of chemical samples. One method for accomplishing this is by docking compounds into the structure of a receptor binding site in order to rank-order compounds by the quality of the interactions they form with the receptor. It is generally established that docking can be reasonably successful at generating good poses of a ligand in an active site. However, the scoring functions that are used with docking are typically not successful at correctly ranking ligands according to binding affinity or even distinguishing correct poses of a given ligand from incorrect ones. Results We have developed a simple method for reducing the number of false positives in a virtual screen, meaning ligands which are scored highly by the docking program but do not bind well in reality. This method uses a docking program for pose generation without regard to scoring, followed by filtering with receptor-based pharmacophore searches. We applied it to three test-case targets: neuraminidase A, cyclin-dependent kinase 2, and the C1 domain of protein kinase C. Conclusion The pharmacophore filtering method can perform better than more traditional docking + scoring methods, and allows the advantages of both docking-based and pharmacophore-based approaches to virtual screening to be fully realized.

  5. Particle Kalman Filtering: A Nonlinear Bayesian Framework for Ensemble Kalman Filters

    CERN Document Server

    Hoteit, Ibrahim; Pham, Dinh-Tuan

    2011-01-01

    This paper investigates an approximation scheme of the optimal nonlinear Bayesian filter based on the Gaussian mixture representation of the state probability distribution function. The resulting filter is similar to the particle filter, but is different from it in that, the standard weight-type correction in the particle filter is complemented by the Kalman-type correction with the associated covariance matrices in the Gaussian mixture. We show that this filter is an algorithm in between the Kalman filter and the particle filter, and therefore is referred to as the particle Kalman filter (PKF). In the PKF, the solution of a nonlinear filtering problem is expressed as the weighted average of an "ensemble of Kalman filters" operating in parallel. Running an ensemble of Kalman filters is, however, computationally prohibitive for realistic atmospheric and oceanic data assimilation problems. For this reason, we consider the construction of the PKF through an "ensemble" of ensemble Kalman filters (EnKFs) instead, ...

  6. Kalman Filtering with Real-Time Applications

    CERN Document Server

    Chui, Charles K

    2009-01-01

    Kalman Filtering with Real-Time Applications presents a thorough discussion of the mathematical theory and computational schemes of Kalman filtering. The filtering algorithms are derived via different approaches, including a direct method consisting of a series of elementary steps, and an indirect method based on innovation projection. Other topics include Kalman filtering for systems with correlated noise or colored noise, limiting Kalman filtering for time-invariant systems, extended Kalman filtering for nonlinear systems, interval Kalman filtering for uncertain systems, and wavelet Kalman filtering for multiresolution analysis of random signals. Most filtering algorithms are illustrated by using simplified radar tracking examples. The style of the book is informal, and the mathematics is elementary but rigorous. The text is self-contained, suitable for self-study, and accessible to all readers with a minimum knowledge of linear algebra, probability theory, and system engineering.

  7. Bacteria/virus filter membrane

    Science.gov (United States)

    Lysaght, M. S.; Goodwin, F.; Roebelen, G.

    1977-01-01

    Hollow acrylate fiber membrane that filters bacterial and viral organisms can be used with closed-cycle life-support systems for underwater habitations or laboratories. Membrane also has applications in fields of medicine, gnotobiotics, pharmaceutical production, and industries and research facilities that require sterile water. Device eliminates need for strong chemicals or sterilizing agents, thereby reducing costs.

  8. Wideband Lithium Niobate FBAR Filters

    Directory of Open Access Journals (Sweden)

    Thomas Baron

    2013-01-01

    Full Text Available Filters based on film bulk acoustic resonators (FBARs are widely used for mobile phone applications, but they can also address wideband aerospace requirements. These devices need high electromechanical coupling coefficients to achieve large band pass filters. The piezoelectric material LiNbO3 complies with such specifications and is compatible with standard fabrication processes. In this work, simple metal—LiNbO3—metal structures have been developed to fabricate single FBAR elements directly connected to each other on a single chip. A fabrication process based on LiNbO3/silicon Au-Au bonding and LiNbO3 lapping/polishing has been developed and is proposed in this paper. Electrical measurements of these FBAR filters are proposed and commented exhibiting filters with 8% of fractional bandwidth and 3.3 dB of insertion losses. Electrical measurements show possibilities to obtain 14% of fractional bandwidth. These devices have been packaged, allowing for power handling, thermal, and ferroelectric tests, corresponding to spatial conditions.

  9. Sample-whitened matched filters

    DEFF Research Database (Denmark)

    Andersen, Ib

    1973-01-01

    components. These filters are shown to exist for ali realistic channels and the complete set of SWMF's for any channel is determined. It is shown that for nonpathological channels there is a unique SWMF which minimizes the amount of intersymbol interference defined as the discrete-time analog to the rms...

  10. Static Filtered Sky Color Constancy

    Directory of Open Access Journals (Sweden)

    Ali Alkhalifah

    2016-05-01

    Full Text Available In Computer Vision, the sky color is used for lighting correction, image color enhancement, horizon alignment, image indexing, and outdoor image classification and in many other applications. In this article, for robust color based sky segmentation and detection, usage of lighting correction for sky color detection is investigated. As such, the impact of color constancy on sky color detection algorithms is evaluated and investigated. The color correction (constancy algorithms used includes Gray-Edge (GE, Gray-World (GW, Max-RGB (MRGB and Shades-of-Gray (SG. The algorithms GE, GW, MRGB, and SG, are tested on the static filtered sky modeling. The static filter is developed in the LAB color space. This evaluation and analysis is essential for detection scenarios, especially, color based object detection in outdoor scenes. From the results, it is concluded that the color constancy before sky color detection using LAB static filters has the potential of improving sky color detection performance. However, the application of the color constancy can impart adverse effects on the detection results. For images, the color constancy algorithms depict a compact and stable representative of the sky chroma loci, however, the sky color locus might have a shifting and deviation in a particular color representation. Since the sky static filters are using the static chromatic values, different results can be obtained by applying color constancy algorithms on various datasets.

  11. Fast cartoon + texture image filters.

    Science.gov (United States)

    Buades, Antoni; Le, Triet M; Morel, Jean-Michel; Vese, Luminita A

    2010-08-01

    Can images be decomposed into the sum of a geometric part and a textural part? In a theoretical breakthrough, [Y. Meyer, Oscillating Patterns in Image Processing and Nonlinear Evolution Equations. Providence, RI: American Mathematical Society, 2001] proposed variational models that force the geometric part into the space of functions with bounded variation, and the textural part into a space of oscillatory distributions. Meyer's models are simple minimization problems extending the famous total variation model. However, their numerical solution has proved challenging. It is the object of a literature rich in variants and numerical attempts. This paper starts with the linear model, which reduces to a low-pass/high-pass filter pair. A simple conversion of the linear filter pair into a nonlinear filter pair involving the total variation is introduced. This new-proposed nonlinear filter pair retains both the essential features of Meyer's models and the simplicity and rapidity of the linear model. It depends upon only one transparent parameter: the texture scale, measured in pixel mesh. Comparative experiments show a better and faster separation of cartoon from texture. One application is illustrated: edge detection.

  12. Conflict-Induced Perceptual Filtering

    Science.gov (United States)

    Wendt, Mike; Luna-Rodriguez, Aquiles; Jacobsen, Thomas

    2012-01-01

    In a variety of conflict paradigms, target and distractor stimuli are defined in terms of perceptual features. Interference evoked by distractor stimuli tends to be reduced when the ratio of congruent to incongruent trials is decreased, suggesting conflict-induced perceptual filtering (i.e., adjusting the processing weights assigned to stimuli…

  13. Bacteria/virus filter membrane

    Science.gov (United States)

    Lysaght, M. S.; Goodwin, F.; Roebelen, G.

    1977-01-01

    Hollow acrylate fiber membrane that filters bacterial and viral organisms can be used with closed-cycle life-support systems for underwater habitations or laboratories. Membrane also has applications in fields of medicine, gnotobiotics, pharmaceutical production, and industries and research facilities that require sterile water. Device eliminates need for strong chemicals or sterilizing agents, thereby reducing costs.

  14. Service discovery using Bloom filters

    NARCIS (Netherlands)

    Goering, P.T.H.; Heijenk, Gerhard J.; Lelieveldt, B.P.F.; Haverkort, Boudewijn R.H.M.; de Laat, C.T.A.M.; Heijnsdijk, J.W.J.

    A protocol to perform service discovery in adhoc networks is introduced in this paper. Attenuated Bloom filters are used to distribute services to nodes in the neighborhood and thus enable local service discovery. The protocol has been implemented in a discrete event simulator to investigate the

  15. Quantized, piecewise linear filter network

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    1993-01-01

    A quantization based piecewise linear filter network is defined. A method for the training of this network based on local approximation in the input space is devised. The training is carried out by repeatedly alternating between vector quantization of the training set into quantization classes an...

  16. Design and Implementation of Wave Digital Filters

    Directory of Open Access Journals (Sweden)

    V. Davidek

    2001-09-01

    Full Text Available One of possibilities of the Wave Digital Filters (WDF design isusing the classical LC-filters theory. The aim of this paper is todemonstrate the design of WDF from the LC filter and the implementationof WDF on the fixed-point digital signal processor. The theory of wavedigital filter has been developed by using the classical scatteringparameter theory. The theory of ladder filters is well-known, and soour present problem can thus be reduced to a problem how to replace theL and C elements of the filters by adaptors and delay elements, addersand multipliers.

  17. Discrete continuous-phase superresolving filters.

    Science.gov (United States)

    Zhou, Sumei; Zhou, Changhe

    2004-12-01

    A new type of phase-only superresolving pupil filter with a discrete continuous-phase profile is presented that is a combination of discrete multilevel-phase modulation and continuous-phase modulation. This type of filter can achieve better superresolution performance than the continuous-phase filters reported in Opt. Lett. 28, 607 (2003). Therefore, with regard to the superresolution effect, this type of filter deserves study for practical applications. More importantly, the diffraction performance of this type of filter can explain the effect of a discrete-phase filter illuminated with a continuous wave front, whose superresolving performance cannot be analyzed with previous superresolution methods.

  18. Automated Integrated Analog Filter Design Issues

    Directory of Open Access Journals (Sweden)

    Karolis Kiela

    2015-07-01

    Full Text Available An analysis of modern automated integrated analog circuits design methods and their use in integrated filter design is done. Current modern analog circuits automated tools are based on optimization algorithms and/or new circuit generation methods. Most automated integrated filter design methods are only suited to gmC and switched current filter topologies. Here, an algorithm for an active RC integrated filter design is proposed, that can be used in automated filter designs. The algorithm is tested by designing an integrated active RC filter in a 65 nm CMOS technology.

  19. Performance comparison of various time variant filters

    Energy Technology Data Exchange (ETDEWEB)

    Kuwata, M. [JEOL Engineering Co. Ltd., Akishima, Tokyo (Japan); Husimi, K.

    1996-07-01

    This paper describes the advantage of the trapezoidal filter used in semiconductor detector system comparing with the other time variant filters. The trapezoidal filter is the compose of a rectangular pre-filter and a gated integrator. We indicate that the best performance is obtained by the differential-integral summing type rectangular pre-filter. This filter is not only superior in performance, but also has the useful feature that the rising edge of the output waveform is linear. We introduce an example of this feature used in a high-energy experiment. (author)

  20. Indirect Kalman Filter in Mobile Robot Application

    Directory of Open Access Journals (Sweden)

    Surachai Panich

    2010-01-01

    Full Text Available Problem statement: The most successful applications of Kalman filtering are to linearize about some nominal trajectory in state space that does not depend on the measurement data. The resulting filter is usually referred to as simply a linearized Kalman filter. Approach: This study introduced mainly indirect Kalman filter to estimate robot’s position. A developed differential encoder system integrated accelerometer is experimental tested in square shape. Results: Experimental results confirmed that indirect Kalman filter improves the accuracy and confidence of position estimation. Conclusion: In summary, we concluded that indirect Kalman filter has good potential to reduce error of measurement data.

  1. PSpice for filters and transmission lines

    CERN Document Server

    Tobin, Paul

    2007-01-01

    In this book, PSpice for Filters and Transmission Lines, we examine a range of active and passive filters where each design is simulated using the latest Cadence Orcad V10.5 PSpice capture software. These filters cannot match the very high order digital signal processing (DSP) filters considered in PSpice for Digital Signal Processing, but nevertheless these filters have many uses. The active filters considered were designed using Butterworth and Chebychev approximation loss functions rather than using the 'cookbook approach' so that the final design will meet a given specification in an exact

  2. Particle Filter for Estimation and Tracking

    Institute of Scientific and Technical Information of China (English)

    Ji-zhen WANG; Zeng-shun ZHAO; Xiao-wei AN; Shu-xia TIAN

    2010-01-01

    In recent years, the particle filter technique has been widely used in tracking, estimation and navigation. In this paper, the authors described several practical filters including the general practical, the extended Kaman practical, and the unscented particle filters. And they explained the degeneracy problem in the practical filter process, and introduced some solved methods. Finally they demonstrated the estimation of different particle filters in non-liner and non-Gaussian situation respectively. The result proved the unscented particle filter had the best performance.

  3. Analyzing radioligand binding data.

    Science.gov (United States)

    Motulsky, Harvey; Neubig, Richard

    2002-08-01

    Radioligand binding experiments are easy to perform, and provide useful data in many fields. They can be used to study receptor regulation, discover new drugs by screening for compounds that compete with high affinity for radioligand binding to a particular receptor, investigate receptor localization in different organs or regions using autoradiography, categorize receptor subtypes, and probe mechanisms of receptor signaling, via measurements of agonist binding and its regulation by ions, nucleotides, and other allosteric modulators. This unit reviews the theory of receptor binding and explains how to analyze experimental data. Since binding data are usually best analyzed using nonlinear regression, this unit also explains the principles of curve fitting with nonlinear regression.

  4. Mediaeval manuscript bindings

    Directory of Open Access Journals (Sweden)

    Jedert Vodopivec

    1999-01-01

    Full Text Available The present article represents an excerpt from the final chapters of the research study titled "The development of structures in mediaeval manuscript bindings - interdependence with conservatory methods". In it, aims, methods of work, archive and library materials used and directions for conservatory methods are presented. Besides, the research study includes also a historcial overview of book bindings, detailed analysis of separate structural elements in Slovenian mediaeval bindings, comprehensive presentation of separate structures, the techniques of binding and materials of the preserved mediaeval bindings in Slovenian public archives and libraries, terminological dictionary of specific professional terms related to binding as a segment of a book, and a catalogue of all analysed bindings, containing a survey of ajI detectable data, sketches,graphite prints and photographs.

  5. On Some Fuzzy Filters in Pseudo-BCI Algebras

    Directory of Open Access Journals (Sweden)

    Xiaohong Zhang

    2014-01-01

    Full Text Available Some new properties of fuzzy associative filters (also known as fuzzy associative pseudo-filters, fuzzy p-filter (also known as fuzzy pseudo-p-filters, and fuzzy a-filter (also known as fuzzy pseudo-a-filters in pseudo-BCI algebras are investigated. By these properties, the following important results are proved: (1 a fuzzy filter (also known as fuzzy pseudo-filters of a pseudo-BCI algebra is a fuzzy associative filter if and only if it is a fuzzy a-filter; (2 a filter (also known as pseudo-filter of a pseudo-BCI algebra is associative if and only if it is an a-filter (also call it pseudo-a filter; (3 a fuzzy filter of a pseudo-BCI algebra is fuzzy a-filter if and only if it is both a fuzzy p-filter and a fuzzy q-filter.

  6. FPGA design and implementation of Gaussian filter

    Science.gov (United States)

    Yang, Zhihui; Zhou, Gang

    2015-12-01

    In this paper , we choose four different variances of 1,3,6 and 12 to conduct FPGA design with three kinds of Gaussian filtering algorithm ,they are implementing Gaussian filter with a Gaussian filter template, Gaussian filter approximation with mean filtering and Gaussian filter approximation with IIR filtering. By waveform simulation and synthesis, we get the processing results on the experimental image and the consumption of FPGA resources of the three methods. We set the result of Gaussian filter used in matlab as standard to get the result error. By comparing the FPGA resources and the error of FPGA implementation methods, we get the best FPGA design to achieve a Gaussian filter. Conclusions can be drawn based on the results we have already got. When the variance is small, the FPGA resources is enough for the algorithm to implement Gaussian filter with a Gaussian filter template which is the best choice. But when the variance is so large that there is no more FPGA resources, we can chose the mean to approximate Gaussian filter with IIR filtering.

  7. Ureaplasma urealyticum binds mannose-binding lectin.

    Science.gov (United States)

    Benstein, Barbara D; Ourth, Donald D; Crouse, Dennis T; Shanklin, D Radford

    2004-10-01

    Mannose-binding C-type lectin (MBL) is an important component of innate immunity in mammals. Mannose-binding lectin (MBL), an acute phase protein, acts as an opsonin for phagocytosis and also activates the mannan-binding lectin complement pathway. It may play a particularly significant role during infancy before adequate specific protection can be provided by the adaptive immune system. Ureaplasma urealyticum has been linked to several diseases including pneumonia and chronic lung disease (CLD) in premature infants. We therefore investigated the ability of U. urealyticum to bind MBL. A guinea pig IgG anti-rabbit-MBL antiserum was produced. An immunoblot (dot-blot) assay done on nitrocellulose membrane determined that the anti-MBL antibody had specificity against both rabbit and human MBL. Pure cultures of U. urealyticum, serotype 3, were used to make slide preparations. The slides containing the organisms were then incubated with nonimmune rabbit serum containing MBL. Ureaplasma was shown to bind rabbit MBL with an immunocytochemical assay using the guinea pig IgG anti-rabbit MBL antiserum. Horseradish peroxidase (HRP)-labeled anti-guinea pig IgG was used to localize the reaction. The anti-MBL antiserum was also used in an immunocytochemical assay to localize U. urealyticum in histological sections of lungs from mice specifically infected with this organism. The same method also indicated binding of MBL by ureaplasma in human lung tissue obtained at autopsy from culture positive infants. Our results demonstrate that ureaplasma has the capacity to bind MBL. The absence of MBL may play a role in the predisposition of diseases related to this organism.

  8. Ligand binding mechanics of maltose binding protein.

    Science.gov (United States)

    Bertz, Morten; Rief, Matthias

    2009-11-13

    In the past decade, single-molecule force spectroscopy has provided new insights into the key interactions stabilizing folded proteins. A few recent studies probing the effects of ligand binding on mechanical protein stability have come to quite different conclusions. While some proteins seem to be stabilized considerably by a bound ligand, others appear to be unaffected. Since force acts as a vector in space, it is conceivable that mechanical stabilization by ligand binding is dependent on the direction of force application. In this study, we vary the direction of the force to investigate the effect of ligand binding on the stability of maltose binding protein (MBP). MBP consists of two lobes connected by a hinge region that move from an open to a closed conformation when the ligand maltose binds. Previous mechanical experiments, where load was applied to the N and C termini, have demonstrated that MBP is built up of four building blocks (unfoldons) that sequentially detach from the folded structure. In this study, we design the pulling direction so that force application moves the two MBP lobes apart along the hinge axis. Mechanical unfolding in this geometry proceeds via an intermediate state whose boundaries coincide with previously reported MBP unfoldons. We find that in contrast to N-C-terminal pulling experiments, the mechanical stability of MBP is increased by ligand binding when load is applied to the two lobes and force breaks the protein-ligand interactions directly. Contour length measurements indicate that MBP is forced into an open conformation before unfolding even if ligand is bound. Using mutagenesis experiments, we demonstrate that the mechanical stabilization effect is due to only a few key interactions of the protein with its ligand. This work illustrates how varying the direction of the applied force allows revealing important details about the ligand binding mechanics of a large protein.

  9. Deep Ultraviolet Macroporous Silicon Filters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I proposal describes a novel method to make deep and far UV optical filters from macroporous silicon. This type of filter consists of an array of...

  10. WAVELET RATIONAL FILTERS AND REGULARITY ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    Zheng Kuang; Ming-gen Cui

    2000-01-01

    In this paper, we choose the trigonometric rational functions as wavelet filters and use them to derive various wavelets. Especially for a certain family of wavelets generated by the rational filters, the better smoothness results than Daubechies' are obtained.

  11. Adaptive Marginal Median Filter for Colour Images

    Directory of Open Access Journals (Sweden)

    Almanzor Sapena

    2011-03-01

    Full Text Available This paper describes a new filter for impulse noise reduction in colour images which is aimed at improving the noise reduction capability of the classical vector median filter. The filter is inspired by the application of a vector marginal median filtering process over a selected group of pixels in each filtering window. This selection, which is based on the vector median, along with the application of the marginal median operation constitutes an adaptive process that leads to a more robust filter design. Also, the proposed method is able to process colour images without introducing colour artifacts. Experimental results show that the images filtered with the proposed method contain less noisy pixels than those obtained through the vector median filter.

  12. Signal interference RF photonic bandstop filter.

    Science.gov (United States)

    Aryanfar, Iman; Choudhary, Amol; Shahnia, Shayan; Pagani, Mattia; Liu, Yang; Marpaung, David; Eggleton, Benjamin J

    2016-06-27

    In the microwave domain, signal interference bandstop filters with high extinction and wide stopbands are achieved through destructive interference of two signals. Implementation of this filtering concept using RF photonics will lead to unique filters with high performance, enhanced tuning range and reconfigurability. Here we demonstrate an RF photonic signal interference filter, achieved through the combination of precise synthesis of stimulated Brillouin scattering (SBS) loss with advanced phase and amplitude tailoring of RF modulation sidebands. We achieve a square-shaped, 20-dB extinction RF photonic filter over a tunable bandwidth of up to 1 GHz with a central frequency tuning range of 16 GHz using a low SBS loss of ~3 dB. Wideband destructive interference in this novel filter leads to the decoupling of the filter suppression from its bandwidth and shape factor. This allows the creation of a filter with all-optimized qualities.

  13. Kalman filtering with real-time applications

    CERN Document Server

    Chui, Charles K

    2017-01-01

    This new edition presents a thorough discussion of the mathematical theory and computational schemes of Kalman filtering. The filtering algorithms are derived via different approaches, including a direct method consisting of a series of elementary steps, and an indirect method based on innovation projection. Other topics include Kalman filtering for systems with correlated noise or colored noise, limiting Kalman filtering for time-invariant systems, extended Kalman filtering for nonlinear systems, interval Kalman filtering for uncertain systems, and wavelet Kalman filtering for multiresolution analysis of random signals. Most filtering algorithms are illustrated by using simplified radar tracking examples. The style of the book is informal, and the mathematics is elementary but rigorous. The text is self-contained, suitable for self-study, and accessible to all readers with a minimum knowledge of linear algebra, probability theory, and system engineering. Over 100 exercises and problems with solutions help de...

  14. ELECTROSTATICALLY ENHANCED BARRIER FILTER COLLECTION

    Energy Technology Data Exchange (ETDEWEB)

    John Erjavec; Michael D. Mann; Ryan Z. Knutson; Michael L. Swanson; Michael E. Collings

    2003-06-01

    This work was performed through the University of North Dakota (UND) Chemical Engineering Department with assistance from UND's Energy & Environmental Research Center. This research was undertaken in response to the U.S. Department of Energy Federal Technology Center Program Solicitation No. DE-PS26-99FT40479, Support of Advanced Coal Research at U.S. Universities and Colleges. Specifically, this research was in support of the UCR Core Program and addressees Topic 1, Improved Hot-Gas Contaminant and Particulate Removal Techniques, introducing an advanced design for particulate removal. Integrated gasification combined cycle (IGCC) offers the potential for very high efficiency and clean electric generation. In IGCC, the product gas from the gasifier needs to be cleaned of particulate matter to avoid erosion and high-temperature corrosion difficulties arising with the turbine blades. Current methods involve cooling the gases to {approx}100 C to condense alkalis and remove sulfur and particulates using conventional scrubber technology. This ''cool'' gas is then directed to a turbine for electric generation. While IGCC has the potential to reach efficiencies of over 50%, the current need to cool the product gas for cleaning prior to firing it in a turbine is keeping IGCC from reaching its full potential. The objective of the current project was to develop a highly reliable particulate collector system that can meet the most stringent turbine requirements and emission standards, can operate at temperatures above 1500 F, is applicable for use with all U.S. coals, is compatible with various sorbent injection schemes for sulfur and alkali control, can be integrated into a variety of configurations for both pressurized gasification and combustion, increases allowable face velocity to reduce filter system capital cost, and is cost-competitive with existing technologies. The collector being developed is a new concept in particulate control called

  15. Protein Binding Pocket Dynamics.

    Science.gov (United States)

    Stank, Antonia; Kokh, Daria B; Fuller, Jonathan C; Wade, Rebecca C

    2016-05-17

    The dynamics of protein binding pockets are crucial for their interaction specificity. Structural flexibility allows proteins to adapt to their individual molecular binding partners and facilitates the binding process. This implies the necessity to consider protein internal motion in determining and predicting binding properties and in designing new binders. Although accounting for protein dynamics presents a challenge for computational approaches, it expands the structural and physicochemical space for compound design and thus offers the prospect of improved binding specificity and selectivity. A cavity on the surface or in the interior of a protein that possesses suitable properties for binding a ligand is usually referred to as a binding pocket. The set of amino acid residues around a binding pocket determines its physicochemical characteristics and, together with its shape and location in a protein, defines its functionality. Residues outside the binding site can also have a long-range effect on the properties of the binding pocket. Cavities with similar functionalities are often conserved across protein families. For example, enzyme active sites are usually concave surfaces that present amino acid residues in a suitable configuration for binding low molecular weight compounds. Macromolecular binding pockets, on the other hand, are located on the protein surface and are often shallower. The mobility of proteins allows the opening, closing, and adaptation of binding pockets to regulate binding processes and specific protein functionalities. For example, channels and tunnels can exist permanently or transiently to transport compounds to and from a binding site. The influence of protein flexibility on binding pockets can vary from small changes to an already existent pocket to the formation of a completely new pocket. Here, we review recent developments in computational methods to detect and define binding pockets and to study pocket dynamics. We introduce five

  16. Adaptive Filter in SAR Interferometry Derived DEM

    Institute of Scientific and Technical Information of China (English)

    XU Caijun; WANG Hua; WANG Jianglin; GE Linlin

    2005-01-01

    In this paper, the performance of median filter, elevation dependent adaptive sigma median filter, and directionally dependent adaptive sigma median filter are tested on both InSAR Tandem DEM and simulated high-level noisy DEM. Through the comparison, the directionally dependent adaptive sigma median filter is proved to be the most effective one not only in the noise removing but also in the boundary preserve.

  17. Designing a Microstrip coupled line bandpass filter

    Directory of Open Access Journals (Sweden)

    Taoufik Ragani

    2013-09-01

    Full Text Available Bandpass filters play a significant role in wireless communication systems. Transmitted and received signals have to be filtered at a certain center frequency with a specific bandwidth, in this paper, a coupled-line bandpass Filter at the center frequency 6 GHz with the wide bandwidth of 2 GHz. this type of filter can be used in WLAN and other applications for the frequency range of 5-7 GHz. 

  18. Nonlinear Attitude Filtering: A Comparison Study

    OpenAIRE

    Zamani, M.; Trumpf, J.; Mahony, R.

    2015-01-01

    This paper contains a concise comparison of a number of nonlinear attitude filtering methods that have attracted attention in the robotics and aviation literature. With the help of previously published surveys and comparison studies, the vast literature on the subject is narrowed down to a small pool of competitive attitude filters. Amongst these filters is a second-order optimal minimum-energy filter recently proposed by the authors. Easily comparable discretized unit quaternion implementati...

  19. Bayesian target tracking based on particle filter

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    For being able to deal with the nonlinear or non-Gaussian problems, particle filters have been studied by many researchers. Based on particle filter, the extended Kalman filter (EKF) proposal function is applied to Bayesian target tracking. Markov chain Monte Carlo (MCMC) method, the resampling step, etc novel techniques are also introduced into Bayesian target tracking. And the simulation results confirm the improved particle filter with these techniques outperforms the basic one.

  20. Expressing stochastic filters via number sequences

    OpenAIRE

    Capponi, A.; Farina, A; Pilotto, C.

    2010-01-01

    We generalize the results presented in [1] regarding the relation between the Kalman filter and the Fibonacci sequence. We consider more general filtering models and relate the finite dimensional Kalman and Benes filters to the Fibonacci sequence and to the Golden Section. We also prove that Fibonacci numbers may be expressed as the convolution of the Fibonacci and Padovan sequence, thus extending the connection between stochastic filtering and Fibonacci sequence to the Padovan sequence.

  1. HF filter design and computer simulation

    CERN Document Server

    Rhea, Randall W

    1994-01-01

    A book for engineers who design and build filters of all types, including lumped element, coaxial, helical, dielectric resonator, stripline and microstrip types. A thorough review of classic and modern filter design techniques, containing extensive practical design information of passband characteristics, topologies and transformations, component effects and matching. An excellent text for the design and construction of microstrip filters.

  2. Cryptosporidium: A Guide to Water Filters

    Science.gov (United States)

    ... for cyst reduction Filters labeled only with these words may NOT be designed to remove Crypto Nominal pore size of 1 micron or smaller One micron filter Effective against Giardia Effective against parasites Carbon filter Water purifier EPA approved ( Caution: EPA does not approve ...

  3. Langevin Monte Carlo filtering for target tracking

    NARCIS (Netherlands)

    Iglesias Garcia, Fernando; Bocquel, Melanie; Driessen, Hans

    2015-01-01

    This paper introduces the Langevin Monte Carlo Filter (LMCF), a particle filter with a Markov chain Monte Carlo algorithm which draws proposals by simulating Hamiltonian dynamics. This approach is well suited to non-linear filtering problems in high dimensional state spaces where the bootstrap filte

  4. RETENTION OF SULFUR DIOXIDE BY NYLON FILTERS

    Science.gov (United States)

    Based on laboratory studies, recovery efficiencies of sulfur dioxide (SO2) were determined for nylon filters. The nylon filters used in these experiments were found to retain SO2. A relatively uniform amount (1.7%) was recoverable from each nylon filter, independent of relative...

  5. UV Bandpass Optical Filter for Microspectometers

    NARCIS (Netherlands)

    Correia, J.H.; Emadi, A.R.; Wolffenbuttel, R.F.

    2006-01-01

    This paper describes the design and modeling of a UV bandpass optical filter for microspectrometers. The materials used for fabricating the multilayer UV filter are: silicon dioxide (SiO2), titanium dioxide (TiO2) and yttrium oxide (Y2O3). The optical filter shows a bandpass response wavelength in t

  6. 27 CFR 24.243 - Filtering aids.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Filtering aids. 24.243... OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine § 24.243 Filtering aids. Inert fibers, pulps, earths, or similar materials, may be used as filtering aids in the cellar treatment...

  7. Measurement and expression of granular filter cleanliness

    African Journals Online (AJOL)

    2013-09-23

    Sep 23, 2013 ... The problem of dirty filter media at water treatment plants, despite having good backwash systems, is a serious ... rapid sand filters are the cause of more filter bed trouble than ..... 14-18 November, 2004, San Antonio, Texas.

  8. Filters: It's Not about Porn, Stupid!

    Science.gov (United States)

    Schuyler, Michael

    1997-01-01

    Discusses libraries' uses of filters to prevent access to objectionable sites on the Internet. Highlights include the American Library Association's resolution against filters as a violation of First Amendment rights; patron's use of terminals for e-mail or games; using filters for collection management; and listservs and online resources…

  9. Gradient based filtering of digital elevation models

    DEFF Research Database (Denmark)

    Knudsen, Thomas; Andersen, Rune Carbuhn

    We present a filtering method for digital terrain models (DTMs). The method is based on mathematical morphological filtering within gradient (slope) defined domains. The intention with the filtering procedure is to improbé the cartographic quality of height contours generated from a DTM based on ...... in the landscape are washed out and misrepresented....

  10. Filter-正则序列与Balanced Big Filter-模%Filter-Regular Sequences and Balanced Big Filter-Modules

    Institute of Scientific and Technical Information of China (English)

    耿玉仙; 朱广俊

    2005-01-01

    通过对filter-正则元及filter-正则序列的研究,利用Cousin复形,局部上同调等一些用于研究banlanced big Cohen-Macaulay模的工具及思想方法,给出了关于balanced big filter-模的一些等价刻划.

  11. Gradient based filtering of digital elevation models

    DEFF Research Database (Denmark)

    Knudsen, Thomas; Andersen, Rune Carbuhn

    We present a filtering method for digital terrain models (DTMs). The method is based on mathematical morphological filtering within gradient (slope) defined domains. The intention with the filtering procedure is to improbé the cartographic quality of height contours generated from a DTM based...

  12. CMOS VHF transconductance-C lowpass filter

    NARCIS (Netherlands)

    Nauta, B.

    1990-01-01

    Experimental results of a VHF CMOS transconductance-C lowpass filter are described. The filter is built with transconductors as published earlier. The cutoff frequency can be tuned from 22 to 98 MHz and the measured filter response is very close to the ideal response

  13. In situ microbial filter used for bioremediation

    Science.gov (United States)

    Carman, M. Leslie; Taylor, Robert T.

    2000-01-01

    An improved method for in situ microbial filter bioremediation having increasingly operational longevity of an in situ microbial filter emplaced into an aquifer. A method for generating a microbial filter of sufficient catalytic density and thickness, which has increased replenishment interval, improved bacteria attachment and detachment characteristics and the endogenous stability under in situ conditions. A system for in situ field water remediation.

  14. Electrically heated particulate filter restart strategy

    Science.gov (United States)

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2011-07-12

    A control system that controls regeneration of a particulate filter is provided. The system generally includes a propagation module that estimates a propagation status of combustion of particulate matter in the particulate filter. A regeneration module controls current to the particulate filter to re-initiate regeneration based on the propagation status.

  15. A mollified Ensemble Kalman filter

    CERN Document Server

    Bergemann, Kay

    2010-01-01

    It is well recognized that discontinuous analysis increments of sequential data assimilation systems, such as ensemble Kalman filters, might lead to spurious high frequency adjustment processes in the model dynamics. Various methods have been devised to continuously spread out the analysis increments over a fixed time interval centered about analysis time. Among these techniques are nudging and incremental analysis updates (IAU). Here we propose another alternative, which may be viewed as a hybrid of nudging and IAU and which arises naturally from a recently proposed continuous formulation of the ensemble Kalman analysis step. A new slow-fast extension of the popular Lorenz-96 model is introduced to demonstrate the properties of the proposed mollified ensemble Kalman filter.

  16. Mixtures of skewed Kalman filters

    KAUST Repository

    Kim, Hyoungmoon

    2014-01-01

    Normal state-space models are prevalent, but to increase the applicability of the Kalman filter, we propose mixtures of skewed, and extended skewed, Kalman filters. To do so, the closed skew-normal distribution is extended to a scale mixture class of closed skew-normal distributions. Some basic properties are derived and a class of closed skew. t distributions is obtained. Our suggested family of distributions is skewed and has heavy tails too, so it is appropriate for robust analysis. Our proposed special sequential Monte Carlo methods use a random mixture of the closed skew-normal distributions to approximate a target distribution. Hence it is possible to handle skewed and heavy tailed data simultaneously. These methods are illustrated with numerical experiments. © 2013 Elsevier Inc.

  17. Particle Filter Tracking without Dynamics

    Directory of Open Access Journals (Sweden)

    Jaime Ortegon-Aguilar

    2007-01-01

    Full Text Available People tracking is an interesting topic in computer vision. It has applications in industrial areas such as surveillance or human-machine interaction. Particle Filters is a common algorithm for people tracking; challenging situations occur when the target's motion is poorly modelled or with unexpected motions. In this paper, an alternative to address people tracking is presented. The proposed algorithm is based in particle filters, but instead of using a dynamical model, it uses background subtraction to predict future locations of particles. The algorithm is able to track people in omnidirectional sequences with a low frame rate (one or two frames per second. Our approach can tackle unexpected discontinuities and changes in the direction of the motion. The main goal of the paper is to track people from laboratories, but it has applications in surveillance, mainly in controlled environments.

  18. Python bindings for libcloudph++

    OpenAIRE

    Jarecka, Dorota; Arabas, Sylwester; Del Vento, Davide

    2015-01-01

    This technical note introduces the Python bindings for libcloudph++. The libcloudph++ is a C++ library of algorithms for representing atmospheric cloud microphysics in numerical models. The bindings expose the complete functionality of the library to the Python users. The bindings are implemented using the Boost.Python C++ library and use NumPy arrays. This note includes listings with Python scripts exemplifying the use of selected library components. An example solution for using the Python ...

  19. ARC Filters Using Only Followers

    Directory of Open Access Journals (Sweden)

    T. Dostal

    1999-04-01

    Full Text Available Several structures of the active RC filters using non-inverting voltage unity-gain followers and dual current positive followers are given in this paper. These structures can be suitable implemented by the positive second generation current conveyors or by the transimpedance operational amplifiers. A symbolical analysis using SNAP and a simulation by PSpice have been made to confirm the given theoretical approach.

  20. Actively Pumped Faraday Optical Filter

    Science.gov (United States)

    1996-04-30

    Richard I. Billmers Vincent M. Contarino David M. Allocca Martin F. Squicciarini William J. Scharpf 5d. PROJECT NUMBER 5e. TASK NUMBER 5f...States Patent [i9] Billmers et al. iiiiiiifflimi iilliiiiiii US005513032A [ii] Patent Number: [45] Date of Patent: 5,513,032 Apr. 30, 1996...54] ACTIVELY PUMPED FARADAY OPTICAL FILTER [75] Inventors: Richard I. Billmers , Bensalem; Vincent M. Contarino, Warrington; David M

  1. Filtering algorithm for dotted interferences

    Energy Technology Data Exchange (ETDEWEB)

    Osterloh, K., E-mail: kurt.osterloh@bam.de [Federal Institute for Materials Research and Testing (BAM), Division VIII.3, Radiological Methods, Unter den Eichen 87, 12205 Berlin (Germany); Buecherl, T.; Lierse von Gostomski, Ch. [Technische Universitaet Muenchen, Lehrstuhl fuer Radiochemie, Walther-Meissner-Str. 3, 85748 Garching (Germany); Zscherpel, U.; Ewert, U. [Federal Institute for Materials Research and Testing (BAM), Division VIII.3, Radiological Methods, Unter den Eichen 87, 12205 Berlin (Germany); Bock, S. [Technische Universitaet Muenchen, Lehrstuhl fuer Radiochemie, Walther-Meissner-Str. 3, 85748 Garching (Germany)

    2011-09-21

    An algorithm has been developed to remove reliably dotted interferences impairing the perceptibility of objects within a radiographic image. This particularly is a major challenge encountered with neutron radiographs collected at the NECTAR facility, Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II): the resulting images are dominated by features resembling a snow flurry. These artefacts are caused by scattered neutrons, gamma radiation, cosmic radiation, etc. all hitting the detector CCD directly in spite of a sophisticated shielding. This makes such images rather useless for further direct evaluations. One approach to resolve this problem of these random effects would be to collect a vast number of single images, to combine them appropriately and to process them with common image filtering procedures. However, it has been shown that, e.g. median filtering, depending on the kernel size in the plane and/or the number of single shots to be combined, is either insufficient or tends to blur sharp lined structures. This inevitably makes a visually controlled processing image by image unavoidable. Particularly in tomographic studies, it would be by far too tedious to treat each single projection by this way. Alternatively, it would be not only more comfortable but also in many cases the only reasonable approach to filter a stack of images in a batch procedure to get rid of the disturbing interferences. The algorithm presented here meets all these requirements. It reliably frees the images from the snowy pattern described above without the loss of fine structures and without a general blurring of the image. It consists of an iterative, within a batch procedure parameter free filtering algorithm aiming to eliminate the often complex interfering artefacts while leaving the original information untouched as far as possible.

  2. Filter Fabrics for Airport Drainage.

    Science.gov (United States)

    1979-09-01

    Systems for *r- field Pavements," Harry R. Cedergren . d. "Development of Guidelines for the Design of Subsurfac( Drainage Systems for Highway Pavement...Structural 4Sectic s," H. R. Cedergren , J. A. Arman, and K. H. O’Brien. e. Drainage of Highway and Airfield Pavements, Harry R. Cedergren .> Five...by Cedergren (974).5 Additionally, several references were used, particularly those describing experimental anu construction prolects using filter

  3. Ventilation filters as sources of air pollution – Processes occurring on surfaces of used filters

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Halás, Oto; Clausen, Geo

    2004-01-01

    Ozone concentrations were monitored upstream and downstream of used filter samples following 24hours of ventilation with ozone- filtered air. The ozone concentration in the air upstream of the filters was maintained at ~75 ppb while the concentration downstream of the filters was initially betwee...

  4. Filter bed systems treating domestic wastewater in the Nordic countries - Performance and reuse of filter media

    DEFF Research Database (Denmark)

    Jenssen, Petter D.; Krogstad, T.; Paruch, A.M.

    2010-01-01

    Nine filter beds have been constructed in the Nordic countries, Denmark, Finland, Norway and Sweden. Filter beds consist of a septic tank followed by an aerobic pre-treatment biofilter and a subsequent saturated flow grass-covered filter. Thus, filter beds are similar to subsurface flow construct...

  5. Optically tunable plasmonic color filters

    Science.gov (United States)

    Liu, Y. J.; Si, G. Y.; Leong, E. S. P.; Wang, B.; Danner, A. J.; Yuan, X. C.; Teng, J. H.

    2012-04-01

    We fabricated sub-wavelength patterned gold plasmonic nanostructures on a quartz substrate through the focused ion beam (FIB) technique. The perforated gold film demonstrated optical transmission peaks in the visible range, which therefore can be used as a plasmonic color filter. Furthermore, by integrating a layer of photoresponsive liquid crystals (LCs) with the gold nanostructure to form a hybrid system, we observed a red-shift of transmission peak wavelength. More importantly, the peak intensity can be further enhanced more than 10% in transmittance due to the refractive index match of the media on both sides of it. By optically pumping the hybrid system using a UV light, nematic-isotropic phase transition of the LCs was achieved, thus changing the effective refractive index experienced by the impinging light. Due to the refractive index change, the transmission peak intensity was modulated accordingly. As a result, an optically tunable plasmonic color filter was achieved. This kind of color filters could be potentially applied to many applications, such as complementary metal-oxide-semiconductor (CMOS) image sensors, liquid crystal display devices, light emitting diodes, etc.

  6. ADVANCED HOT GAS FILTER DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    E.S. Connolly; G.D. Forsythe

    1998-12-22

    Advanced, coal-based power plants will require durable and reliable hot gas filtration systems to remove particulate contaminants from the gas streams to protect downstream components such as turbine blades from erosion damage. It is expected that the filter elements in these systems will have to be made of ceramic materials to withstand goal service temperatures of 1600 F or higher. Recent demonstration projects and pilot plant tests have indicated that the current generation of ceramic hot gas filters (cross-flow and candle configurations) are failing prematurely. Two of the most promising materials that have been extensively evaluated are clay-bonded silicon carbide and alumina-mullite porous monoliths. These candidates, however, have been found to suffer progressive thermal shock fatigue damage, as a result of rapid cooling/heating cycles. Such temperature changes occur when the hot filters are back-pulsed with cooler gas to clean them, or in process upset conditions, where even larger gas temperature changes may occur quickly and unpredictably. In addition, the clay-bonded silicon carbide materials are susceptible to chemical attack of the glassy binder phase that holds the SiC particles together, resulting in softening, strength loss, creep, and eventual failure.

  7. Microscopic filter feeders near boundaries

    Science.gov (United States)

    Pepper, Rachel; Roper, Marcus; Ryu, Sangjin; Matsudiara, Paul; Stone, Howard

    2009-11-01

    We show through calculations, simulations, and experiments that the eddies often observed near sessile filter feeders are due to the presence of nearby boundaries. We model the common filter feeder Vorticella, which is approx 50 μm across and which feeds by removing bacteria from ocean or pond water that it draws towards itself. We use an analytic stokeslet model and a Brinkman flow approximation with the organism modeled as a cylinder with two different boundary conditions to predict the size of the eddy caused by two parallel no-slip boundaries that represent the slides between which experimental observations are often made. We also use three-dimensional finite-element simulations to fully solve for the flow around a model Vorticella. Additionally, we track particles around live feeding Vorticella in order to determine the experimental flow field. Our models are in good agreement both with each other and with the experiments. We also show through calculations that filter feeders such as Vorticella can greatly enhance their nutrient uptake by feeding at an angle rather than perpendicular to a substrate.

  8. DNS & Bind Cookbook

    CERN Document Server

    Liu, Cricket

    2011-01-01

    The DNS & BIND Cookbook presents solutions to the many problems faced by network administrators responsible for a name server. Following O'Reilly's popular problem-and-solution cookbook format, this title is an indispensable companion to DNS & BIND, 4th Edition, the definitive guide to the critical task of name server administration. The cookbook contains dozens of code recipes showing solutions to everyday problems, ranging from simple questions, like, "How do I get BIND?" to more advanced topics like providing name service for IPv6 addresses. It's full of BIND configuration files that yo

  9. Python bindings for libcloudph++

    CERN Document Server

    Jarecka, Dorota; Del Vento, Davide

    2015-01-01

    This technical note introduces the Python bindings for libcloudph++. The libcloudph++ is a C++ library of algorithms for representing atmospheric cloud microphysics in numerical models. The bindings expose the complete functionality of the library to the Python users. The bindings are implemented using the Boost.Python C++ library and use NumPy arrays. This note includes listings with Python scripts exemplifying the use of selected library components. An example solution for using the Python bindings to access libcloudph++ from Fortran is presented.

  10. Compact tunable microwave filter using retroreflective acousto-optic filtering and delay controls.

    Science.gov (United States)

    Riza, Nabeel A; Ghauri, Farzan N

    2007-03-01

    Programmable broadband rf filters are demonstrated using a compact retroreflective optical design with an acousto-optic tunable filter and a chirped fiber Bragg grating. This design enables fast 34 micros domain analog-mode control of rf filter time delays and weights. Two proof-of-concept filters are demonstrated including a two-tap notch filter with >35 dB notch depth and a four-tap bandpass filter. Both filters have 2-8 GHz tunability and a 34 micros reset time.

  11. Symmetry properties with pupil phase-filters.

    Science.gov (United States)

    Ledesma, Silvia; Campos, J; Escalera, J; Yzuel, M

    2004-05-31

    Pupil filters can modify the three dimensional response of an optical system. In this paper, we study different pupil symmetries that produce a predictable image behavior. We show that different pupil-filters that satisfy certain symmetry conditions can produce axial responses which are either identical or mirror reflected. We also establish the differences in the symmetry properties between amplitude-only filters and phase-only filters. In particular, we are interested in phase filters that produce transverse superresolution with axial superresolution or high depth of focus.

  12. Topology optimization of microwave waveguide filters

    CERN Document Server

    Aage, Niels

    2016-01-01

    We present a density based topology optimization approach for the design of metallic microwave insert filters. A two-phase optimization procedure is proposed in which we, starting from a uniform design, first optimize to obtain a set of spectral varying resonators followed by a band gap optimization for the desired filter characteristics. This is illustrated through numerical experiments and comparison to a standard band pass filter design. It is seen that the carefully optimized topologies can sharpen the filter characteristics and improve performance. Furthermore, the obtained designs share little resemblance to standard filter layouts and hence the proposed design method offers a new design tool in microwave engineering.

  13. Linear Regression Based Real-Time Filtering

    Directory of Open Access Journals (Sweden)

    Misel Batmend

    2013-01-01

    Full Text Available This paper introduces real time filtering method based on linear least squares fitted line. Method can be used in case that a filtered signal is linear. This constraint narrows a band of potential applications. Advantage over Kalman filter is that it is computationally less expensive. The paper further deals with application of introduced method on filtering data used to evaluate a position of engraved material with respect to engraving machine. The filter was implemented to the CNC engraving machine control system. Experiments showing its performance are included.

  14. Filtering in the time and frequency domains

    CERN Document Server

    Blinchikoff, Herman

    2001-01-01

    Long regarded as a classic of filter theory and design, this book stands as the most comprehensive treatment of filtering techniques, devices and concepts as well as pertinent mathematical relationships. Analysis and theory are supplemented by detailed design curves, fully explained examples and problem and answer sections. Discussed are the derivation of filtering functions, Fourier, Laplace, Hilbert and z transforms, lowpass responses, the transformation of lowpass into other filter types, the all-pass function, the effect of losses on theoretical responses, matched filtering, methods of tim

  15. Programmable Baseband Filter for Multistandard Mobile Phones

    DEFF Research Database (Denmark)

    Jensen, Rasmus Glarborg; Christensen, Kåre Tais; Bruun, Erik

    2003-01-01

    This paper describes a channel selection filter for mobile communication systems using a direct down conversion architecture. The filter can be programmed to meet the requirements of different communication standards, including GSM (Global System for Mobile communication), WCDMA (Wideband Code...... Division Multiple Access), and Bluetooth. The filter includes a novel DC offset compensation circuit that combines offset sampling in GSM mode with high pass filtering in WCDMA mode. The filter can be programmed to different noise performance levels by programming the impedance level and power consumption...

  16. Programmable Baseband Filter for Multistandard Mobile Phones

    DEFF Research Database (Denmark)

    Jensen, Rasmus Glarborg; Christensen, Kåre Tais; Bruun, Erik

    2003-01-01

    This paper describes a channel selection filter for mobile communication systems using a direct down conversion architecture. The filter can be programmed to meet the requirements of different communication standards, including GSM (Global System for Mobile communication), WCDMA (Wideband Code...... Division Multiple Access), and Bluetooth. The filter includes a novel DC offset compensation circuit that combines offset sampling in GSM mode with high pass filtering in WCDMA mode. The filter can be programmed to different noise performance levels by programming the impedance level and power consumption...

  17. Performance of conformal guided mode resonance filters.

    Science.gov (United States)

    Cannistra, Aaron T; Poutous, Menelaos K; Johnson, Eric G; Suleski, Thomas J

    2011-04-01

    Guided mode resonance (GMR) filters are highly functional micro-optics capable of narrowband spectral filtering. GMR devices have previously been demonstrated on flat substrates using a wide range of materials and configurations. In this Letter, we apply a soft lithographic technique followed by the deposition of dielectric layers to generate GMR filters on a concave lens surface. Resonances of the resulting conformal GMR filters are experimentally measured and characterized, and the results are compared to the performance of similar GMR filters fabricated on flat surfaces.

  18. Efficient, Narrow-Pass-Band Optical Filters

    Science.gov (United States)

    Sandford, Stephen P.

    1996-01-01

    Optical filters with both narrow pass bands and high efficiencies fabricated to design specifications. Offer tremendous improvements in performance for number of optical (including infrared) systems. In fiber-optic and free-space communication systems, precise frequency discrimination afforded by narrow pass bands of filters provide higher channel capacities. In active and passive remote sensors like lidar and gas-filter-correlation radiometers, increased efficiencies afforded by filters enhance detection of small signals against large background noise. In addition, sizes, weights, and power requirements of many optical and infrared systems reduced by taking advantage of gains in signal-to-noise ratios delivered by filters.

  19. Frequency domain FIR and IIR adaptive filters

    Science.gov (United States)

    Lynn, D. W.

    1990-01-01

    A discussion of the LMS adaptive filter relating to its convergence characteristics and the problems associated with disparate eigenvalues is presented. This is used to introduce the concept of proportional convergence. An approach is used to analyze the convergence characteristics of block frequency-domain adaptive filters. This leads to a development showing how the frequency-domain FIR adaptive filter is easily modified to provide proportional convergence. These ideas are extended to a block frequency-domain IIR adaptive filter and the idea of proportional convergence is applied. Experimental results illustrating proportional convergence in both FIR and IIR frequency-domain block adaptive filters is presented.

  20. Filter casing for respirators. Filtergehaeuse fuer Atemschutzmasken

    Energy Technology Data Exchange (ETDEWEB)

    Pantaleon-Stemberg, G.

    1987-12-16

    A filter casing for respirators, in which filter inserts are held exchangeably by means of a holder engaging into the wall of the casing, is improved in that filter inserts of different height and in various combinations can be fixed in it with the same holder. For that purpose the holder is designed as a socket which is open at both ends and can be fixed to the inside wall of the filter casing and is axially displaceable and envelops the filter insert, the end circumference of said socket having a fixing device projecting inwards.

  1. Auditory filters at low-frequencies

    DEFF Research Database (Denmark)

    Orellana, Carlos Andrés Jurado; Pedersen, Christian Sejer; Møller, Henrik

    2009-01-01

    -ear transfer function), the asymmetry of the auditory filter changed from steeper high-frequency slopes at 1000 Hz to steeper low-frequency slopes below 100 Hz. Increasing steepness at low-frequencies of the middle-ear high-pass filter is thought to cause this effect. The dynamic range of the auditory filter...... was found to steadily decrease with decreasing center frequency. Although the observed decrease in filter bandwidth with decreasing center frequency was only approximately monotonic, the preliminary data indicates the filter bandwidth does not stabilize around 100 Hz, e.g. it still decreases below...

  2. Adaptable Iterative and Recursive Kalman Filter Schemes

    Science.gov (United States)

    Zanetti, Renato

    2014-01-01

    Nonlinear filters are often very computationally expensive and usually not suitable for real-time applications. Real-time navigation algorithms are typically based on linear estimators, such as the extended Kalman filter (EKF) and, to a much lesser extent, the unscented Kalman filter. The Iterated Kalman filter (IKF) and the Recursive Update Filter (RUF) are two algorithms that reduce the consequences of the linearization assumption of the EKF by performing N updates for each new measurement, where N is the number of recursions, a tuning parameter. This paper introduces an adaptable RUF algorithm to calculate N on the go, a similar technique can be used for the IKF as well.

  3. An overview on hybrid active filters

    Energy Technology Data Exchange (ETDEWEB)

    Libano, Fausto B.; Uceda, Javier [Universidad Politecnica de Madrid (Spain). Division de Ingenieria Electronica; Simonetti, Domingos S.L. [Espirito Santo Univ., Vitoria, ES (Brazil). Dept. de Engenharia Eletrica

    1995-12-31

    This paper summarizes the main hybrid filter methods. A special attention is given to series active filter associations. Nowadays, an hybrid filtering is the preferred choice to improve line performance when feeding high-power non-linear loads. In addition, the use of an independent reference frame leads to a better response comparing to the initial proposition of p-q theory. A comparison of possible filter associations is given, presenting the expected function of each one. The work represents an interesting overview on the state-of-the-art of hybrid filters. (author) 16 refs., 8 figs., 2 tabs.

  4. Field Evaluation of the Sidestream Sensors for Filter/Separators and Clay Filters.

    Science.gov (United States)

    1987-02-01

    Report No. 552 OTC FILE COPY S ApOV FOR pffBU WAMES DISTRIBUTION UNUMITED FIELD EVALUATION OF THE SIDESTREAM SENSORS FOR FILTER/SEPARATORS AND CLAY FILTERS...SIDESTREA SENSORS FOR FILTER/SEPARATORS AND CLAY FILTERS (CRC PROJECT No. CA-47-70) IN FORMULATING AND APPROVING REPCRTS, THE APPROPRIATE COMMITTEE OF THE...noted that the filter/separator unit at Basle operated at an unusually high pressure drop. The deactivated coalescer was found to contain gummy

  5. Fast and Provably Accurate Bilateral Filtering.

    Science.gov (United States)

    Chaudhury, Kunal N; Dabhade, Swapnil D

    2016-06-01

    The bilateral filter is a non-linear filter that uses a range filter along with a spatial filter to perform edge-preserving smoothing of images. A direct computation of the bilateral filter requires O(S) operations per pixel, where S is the size of the support of the spatial filter. In this paper, we present a fast and provably accurate algorithm for approximating the bilateral filter when the range kernel is Gaussian. In particular, for box and Gaussian spatial filters, the proposed algorithm can cut down the complexity to O(1) per pixel for any arbitrary S . The algorithm has a simple implementation involving N+1 spatial filterings, where N is the approximation order. We give a detailed analysis of the filtering accuracy that can be achieved by the proposed approximation in relation to the target bilateral filter. This allows us to estimate the order N required to obtain a given accuracy. We also present comprehensive numerical results to demonstrate that the proposed algorithm is competitive with the state-of-the-art methods in terms of speed and accuracy.

  6. Signal enhancement with variable span linear filters

    CERN Document Server

    Benesty, Jacob; Jensen, Jesper R

    2016-01-01

    This book introduces readers to the novel concept of variable span speech enhancement filters, and demonstrates how it can be used for effective noise reduction in various ways. Further, the book provides the accompanying Matlab code, allowing readers to easily implement the main ideas discussed. Variable span filters combine the ideas of optimal linear filters with those of subspace methods, as they involve the joint diagonalization of the correlation matrices of the desired signal and the noise. The book shows how some well-known filter designs, e.g. the minimum distortion, maximum signal-to-noise ratio, Wiener, and tradeoff filters (including their new generalizations) can be obtained using the variable span filter framework. It then illustrates how the variable span filters can be applied in various contexts, namely in single-channel STFT-based enhancement, in multichannel enhancement in both the time and STFT domains, and, lastly, in time-domain binaural enhancement. In these contexts, the properties of ...

  7. Performance analysis and design of filtering hydrocyclones

    Directory of Open Access Journals (Sweden)

    L. G. M. Vieira

    2005-03-01

    Full Text Available The filtering hydrocyclone is a solid-liquid separation device patented by the Chemical Engineering Department at the Federal University of Uberlândia, which consists of a hydrocyclone whose conical section was replaced by a conical filtering wall. The objective of this work is to compare the performances of the filtering hydrocyclones designed by Bradley and by Rietema. The experimental results obtained with the filtering hydrocyclones under the same operational conditions as those used with the conventional device allow the conclusion that performance of the Bradley and Rietema types is significantly influenced by the filtering medium. Rietema's filtering hydrocyclones had a lower volumetric feed flowrate than the conventional device and Bradley's filtering hydrocyclones showed increases in this same variable. In both designs, overall efficiency was influenced by the underflow-to-throughput ratio.

  8. Filter for isotopic alteration of mercury vapor

    Science.gov (United States)

    Grossman, M.W.; George, W.A.

    1989-06-13

    A filter is described for enriching the [sup 196]Hg content of mercury, including a reactor, a low pressure electric discharge lamp containing a fill of mercury and an inert gas. A filter is arranged concentrically around the lamp. The reactor is arranged around said filter, whereby radiation from said lamp passes through the filter and into said reactor. The lamp, the filter and the reactor are formed of quartz, and are transparent to ultraviolet light. The [sup 196]Hg concentration in the mercury fill is less than that which is present in naturally occurring mercury, that is, less than about 0.146 atomic weight percent. Hydrogen is also included in the fill and serves as a quenching gas in the filter, the hydrogen also serving to prevent disposition of a dark coating on the interior of the filter. 9 figs.

  9. A multiscale method to calculate filter blockage

    CERN Document Server

    Dalwadi, Mohit P; Griffiths, Ian M

    2016-01-01

    Filters that act by adsorbing contaminant onto their pore walls will experience a decrease in porosity over time, and may eventually block. As adsorption will generally be larger towards the entrance of a filter, where the concentration of contaminant particles is higher, these effects can also result in a spatially varying porosity. We investigate this dynamic process using an extension of homogenization theory that accounts for a macroscale variation in microstructure. We formulate and homogenize the coupled problems of flow through a filter with a near-periodic time-dependent microstructure, solute transport due to advection, diffusion, and filter adsorption, and filter structure evolution due to the adsorption of contaminant. We use the homogenized equations to investigate how the contaminant removal and filter lifespan depend on the initial porosity distribution for a unidirectional flow. We confirm a conjecture made in Dalwadi et al. (2015) that filters with an initially negative porosity gradient have ...

  10. Signal Enhancement with Variable Span Linear Filters

    DEFF Research Database (Denmark)

    Benesty, Jacob; Christensen, Mads Græsbøll; Jensen, Jesper Rindom

    -to-noise ratio, Wiener, and tradeoff filters (including their new generalizations) can be obtained using the variable span filter framework. It then illustrates how the variable span filters can be applied in various contexts, namely in single-channel STFT-based enhancement, in multichannel enhancement in both......This book introduces readers to the novel concept of variable span speech enhancement filters, and demonstrates how it can be used for effective noise reduction in various ways. Further, the book provides the accompanying Matlab code, allowing readers to easily implement the main ideas discussed....... Variable span filters combine the ideas of optimal linear filters with those of subspace methods, as they involve the joint diagonalization of the correlation matrices of the desired signal and the noise. The book shows how some well-known filter designs, e.g. the minimum distortion, maximum signal...

  11. Evaluation of HEPA filter service life

    Energy Technology Data Exchange (ETDEWEB)

    Fretthold, J.K.; Stithem, A.R.

    1997-07-14

    Rocky Flats Environmental Technology Site (RFETS), has approximately 10,000 High Efficiency Particulate Air (HEPA) Filters installed in a variety of filter plenums. These ventilation/filtration plenum systems are used to control the release of airborne particulate contaminates to the environment during normal operations and potential accidents. This report summarizes the results of destructive and non-destructive tests on HEPA filters obtained from a wide variety of ages and service conditions. These tests were performed to determine an acceptable service life criteria for HEPA filters used at Rocky Flats Environmental Technology Site (RFETS). A total of 140 filters of various ages (1972 to 1996) and service history (new, aged unused, used) were tested. For the purpose of this report, filter age from manufacture date/initial test date to the current sample date was used, as opposed to the actual time a filter was installed in an operating system.

  12. Adaptive Filters for Muscle Response Suppression

    DEFF Research Database (Denmark)

    Sennels, Søren; Biering-Soerensen, Fin; Hansen, Steffen Duus

    1996-01-01

    are proposed, based on the observation that the shape of the muscle responses only exhibits moderate changes during a time window of up to 300 ms. The filters are derived and compared with a conventional fixed comb filter on both simulated and real data. For variations in amplitude of the muscle responses...... the performance of the adaptive filters are independent of the filter length, whereas for variations in the shape the performance is increased with the filter length. Using the adaptive filters it is possible to obtain a signal-to-noise ratio, which enables the EMG from a partly paralysed muscle to be used......To be able to use the voluntary EMG-signal from an electrically stimulated muscle as control signal for FES-applications, it is necessary to eliminate the muscle response evoked by the stimulation. The muscle response is a non-stationary signal, therefore a set of linear adaptive prediction filters...

  13. Image Filtering with Field Programmable Gate Array

    Directory of Open Access Journals (Sweden)

    Arūnas Šlenderis

    2013-05-01

    Full Text Available The research examined the use of field programmable gate arrays (FPGA in image filtering. Experimental and theoretical researches were reviewed. Experiments with Cyclone III family FPGA chip with implemented NIOS II soft processor were considered. Image filtering was achieved with symmetrical and asymmetrical finite impulse response filters with convolution kernel. The system, which was implemented with 3×3 symmetrical filter, which was implemented using the hardware description language, uses 59% of logic elements of the chip and 10 multiplication elements. The system with asymmetrical filter uses the same amount of logic elements and 13 multiplication elements. Both filter systems consume approx. 545 mW of power. The system, which is designed for filter implementation in C language, uses 65% of all logical elements and consumes 729 mW of power.Article in Lithuanian

  14. Model based optimization of EMC input filters

    Energy Technology Data Exchange (ETDEWEB)

    Raggl, K; Kolar, J. W. [Swiss Federal Institute of Technology, Power Electronic Systems Laboratory, Zuerich (Switzerland); Nussbaumer, T. [Levitronix GmbH, Zuerich (Switzerland)

    2008-07-01

    Input filters of power converters for compliance with regulatory electromagnetic compatibility (EMC) standards are often over-dimensioned in practice due to a non-optimal selection of number of filter stages and/or the lack of solid volumetric models of the inductor cores. This paper presents a systematic filter design approach based on a specific filter attenuation requirement and volumetric component parameters. It is shown that a minimal volume can be found for a certain optimal number of filter stages for both the differential mode (DM) and common mode (CM) filter. The considerations are carried out exemplarily for an EMC input filter of a single phase power converter for the power levels of 100 W, 300 W, and 500 W. (author)

  15. Analog Electronic Filters Theory, Design and Synthesis

    CERN Document Server

    Dimopoulos, Hercules G

    2012-01-01

    Filters are essential subsystems in a huge variety of electronic systems. Filter applications are innumerable; they are used for noise reduction, demodulation, signal detection, multiplexing, sampling, sound and speech processing, transmission line equalization and image processing, to name just a few. In practice, no electronic system can exist without filters. They can be found in everything from power supplies to mobile phones and hard disk drives and from loudspeakers and MP3 players to home cinema systems and broadband Internet connections. This textbook introduces basic concepts and methods and the associated mathematical and computational tools employed in electronic filter theory, synthesis and design.  This book can be used as an integral part of undergraduate courses on analog electronic filters. Includes numerous, solved examples, applied examples and exercises for each chapter. Includes detailed coverage of active and passive filters in an independent but correlated manner. Emphasizes real filter...

  16. A new method for adaptive color image filtering

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An adaptive color image filter (ACIF) is proposed in this note. Through analyzing noise corruption of color image, efficient locally adaptive filters are chosen for image enhancement. The proposed adaptive color image filter combines advantages of both nonlinear vector filters and linear filters, it attenuates noise and preserves edges and details very well. Experimental results show that the proposed filter performs better than vector median filter, directional-distance filter, directional-magnitude vector filter, adaptive nearest-neighbor filter, and -trimmed mean filter.

  17. On Binding Domains

    NARCIS (Netherlands)

    Everaert, M.B.H.

    2005-01-01

    In this paper I want to explore reasons for replacing Binding Theory based on the anaphor-pronoun dichotomy by a Binding Theory allowing more domains restricting/defining anaphoric dependencies. This will, thus, have consequences for the partitioning of anaphoric elements, presupposing more types of

  18. Melanin-binding radiopharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    Packer, S; Fairchild, R G; Watts, K P; Greenberg, D; Hannon, S J

    1980-01-01

    The scope of this paper is limited to an analysis of the factors that are important to the relationship of radiopharmaceuticals to melanin. While the authors do not attempt to deal with differences between melanin-binding vs. melanoma-binding, a notable variance is assumed. (PSB)

  19. DNS BIND Server Configuration

    Directory of Open Access Journals (Sweden)

    Radu MARSANU

    2011-01-01

    Full Text Available After a brief presentation of the DNS and BIND standard for Unix platforms, the paper presents an application which has a principal objective, the configuring of the DNS BIND 9 server. The general objectives of the application are presented, follow by the description of the details of designing the program.

  20. Thermodynamics of fragment binding.

    Science.gov (United States)

    Ferenczy, György G; Keserű, György M

    2012-04-23

    The ligand binding pockets of proteins have preponderance of hydrophobic amino acids and are typically within the apolar interior of the protein; nevertheless, they are able to bind low complexity, polar, water-soluble fragments. In order to understand this phenomenon, we analyzed high resolution X-ray data of protein-ligand complexes from the Protein Data Bank and found that fragments bind to proteins with two near optimal geometry H-bonds on average. The linear extent of the fragment binding site was found not to be larger than 10 Å, and the H-bonding region was found to be restricted to about 5 Å on average. The number of conserved H-bonds in proteins cocrystallized with multiple different fragments is also near to 2. These fragment binding sites that are able to form limited number of strong H-bonds in a hydrophobic environment are identified as hot spots. An estimate of the free-energy gain of H-bond formation versus apolar desolvation supports that fragment sized compounds need H-bonds to achieve detectable binding. This suggests that fragment binding is mostly enthalpic that is in line with their observed binding thermodynamics documented in Isothermal Titration Calorimetry (ITC) data sets and gives a thermodynamic rationale for fragment based approaches. The binding of larger compounds tends to more rely on apolar desolvation with a corresponding increase of the entropy content of their binding free-energy. These findings explain the reported size-dependence of maximal available affinity and ligand efficiency both behaving differently in the small molecule region featured by strong H-bond formation and in the larger molecule region featured by apolar desolvation.

  1. ADVANCED HOT GAS FILTER DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Matthew R. June; John L. Hurley; Mark W. Johnson

    1999-04-01

    Iron aluminide hot gas filters have been developed using powder metallurgy techniques to form seamless cylinders. Three alloys were short-term corrosion tested in simulated IGCC atmospheres with temperatures between 925 F and 1200 F with hydrogen sulfide concentrations ranging from 783 ppm{sub v} to 78,300 ppm{sub v}. Long-term testing was conducted for 1500 hours at 925 F with 78,300 ppm{sub v}. The FAS and FAL alloys were found to be corrosion resistant in the simulated environments. The FAS alloy has been commercialized.

  2. Visualizing the application of filters

    DEFF Research Database (Denmark)

    Rasmussen, Rasmus; Hertzum, Morten

    2013-01-01

    Through a mixed-design experiment we compare how emergency-department clinicians perform when solving realistic work tasks with an electronic whiteboard where the application of information filters is visualized either by blocking, colour-coding or blurring information. We find that clinicians...... perform significantly faster and with less effort and temporal demand when using the blocking interface. However, we also find that the colour-coding interface provides clinicians with a better overview of the information displayed by the electronic whiteboard. The blurring interface did not perform...

  3. Nonparametric regression with filtered data

    CERN Document Server

    Linton, Oliver; Nielsen, Jens Perch; Van Keilegom, Ingrid; 10.3150/10-BEJ260

    2011-01-01

    We present a general principle for estimating a regression function nonparametrically, allowing for a wide variety of data filtering, for example, repeated left truncation and right censoring. Both the mean and the median regression cases are considered. The method works by first estimating the conditional hazard function or conditional survivor function and then integrating. We also investigate improved methods that take account of model structure such as independent errors and show that such methods can improve performance when the model structure is true. We establish the pointwise asymptotic normality of our estimators.

  4. Polarization Filtering of SAR Data

    Science.gov (United States)

    Dubois, Pascale C.; Van Zyl, Jakob J.

    1991-01-01

    Theoretical analysis of polarization filtering of synthetic-aperture-radar (SAR) returns provide hybrid method applied to either (1) maximize signal-to-noise ratio of return from given target or (2) enhance contrast between targets of two different types (that have different polarization properties). Method valid for both point and extended targets and for both monostatic and bistatic radars as well as SAR. Polarization information in return signals provides more complete description of radar-scattering properties of targets and used to obtain additional information about targets for use in classifying them, discriminating between them, or enhancing features of radar images.

  5. Wavelet filtering of chaotic data

    Directory of Open Access Journals (Sweden)

    M. Grzesiak

    2000-01-01

    Full Text Available Satisfactory method of removing noise from experimental chaotic data is still an open problem. Normally it is necessary to assume certain properties of the noise and dynamics, which one wants to extract, from time series. The wavelet based method of denoising of time series originating from low-dimensional dynamical systems and polluted by the Gaussian white noise is considered. Its efficiency is investigated by comparing the correlation dimension of clean and noisy data generated for some well-known dynamical systems. The wavelet method is contrasted with the singular value decomposition (SVD and finite impulse response (FIR filter methods.

  6. Wavelet filtering of chaotic data

    Science.gov (United States)

    Grzesiak, M.

    Satisfactory method of removing noise from experimental chaotic data is still an open problem. Normally it is necessary to assume certain properties of the noise and dynamics, which one wants to extract, from time series. The wavelet based method of denoising of time series originating from low-dimensional dynamical systems and polluted by the Gaussian white noise is considered. Its efficiency is investigated by comparing the correlation dimension of clean and noisy data generated for some well-known dynamical systems. The wavelet method is contrasted with the singular value decomposition (SVD) and finite impulse response (FIR) filter methods.

  7. Hardware Approach of a Multipurpose Finite Impulse Response Filter for Real-Time Filtering Applications

    Directory of Open Access Journals (Sweden)

    Md. S. Amin

    2011-01-01

    Full Text Available Problem statement: Finite Impulse Response (FIR filters are widely used in various DSP applications. The design of digital FIR filters is a very basic problem in digital signal processing. A FIR filter with multiple operation capability is certainly very useful for any real-time filtering applications. This article presents a multipurpose FIR filter design modeled by the hardware description language VHDL for real-time filtering application. Approach: The VHDL has its concept of concurrency to cope with the parallelism of digital hardware. The novel feature is the capability of the design to accomplish up to 127variable filter order and an arbitrary filter frequency response. The coefficients are calculated by Hamming windowing technique. Basing on selection embedded in the design, the model is able to execute highpass, lowpass, bandstop and bandpass filtering operations. It is set at 8-bit signed data processing. To filter the input data in time domain, Linear Constant Coefficient Difference Equation (LCCDE is used by the filter. Results: The design outputs are validated through simulation and compilation. The output results are also compared with the MATLAB implemented calculated output results to test the correctness that proves the effectiveness of the design. Conclusion: With the capability of filtering signal in real time mode utilizing arbitrary filter shape, the multipurpose filter proves to be versatile.

  8. FILTER COMPONENT ASSESSMENT--CERAMIC CANDLES--

    Energy Technology Data Exchange (ETDEWEB)

    M.A. Alvin

    2004-04-23

    Efforts at Siemens Westinghouse Power Corporation (SWPC) have been focused on development of hot gas filter systems as an enabling technology for advanced coal and biomass-based gas turbine power generation applications. SWPC has been actively involved in the development of advanced filter materials and component configuration, has participated in numerous surveillance programs characterizing the material properties and microstructure of field tested filter elements, and has undertaken extended, accelerated filter life testing programs. This report summarizes the results of SWPC's filter component assessment efforts, identifying the performance and stability of porous monolithic, fiber reinforced, and filament wound ceramic hot gas candle filters, potentially for {ge}3 years of viable pressurized fluidized-bed combustion (PFBC) service operating life.

  9. Design Procedure for Compact Folded Waveguide Filters

    DEFF Research Database (Denmark)

    Dong, Yunfeng; Johansen, Tom Keinicke; Zhurbenko, Vitaliy;

    Waveguide filters are widely used in communication systems due to low losses and high power handling capabilities. One drawback of the conventional waveguide filters is their large size, especially for low-frequency and high-order realizations. It has been shown that the footprint of conventional...... waveguide resonators can be reduced to one quarter by folding the electric and magnetic fields inside the cavity (J. S. Hong, Microwave Symposium Digest, 2004, Vol. 1, pp. 213-216). This paper presents a novel systematic procedure for designing compact low-loss bandpass filters by using folded waveguide...... resonators. As a design example, a scaled version of a filter specified for a TETRA (Terrestrial Trunked Radio) system has been considered. The folded waveguide filter is designed to fulfil specific requirements, and the design procedure can be easily applied to other folded waveguide filter designs...

  10. Filtering and control of wireless networked systems

    CERN Document Server

    Zhang, Dan; Yu, Li

    2017-01-01

    This self-contained book, written by leading experts, offers a cutting-edge, in-depth overview of the filtering and control of wireless networked systems. It addresses the energy constraint and filter/controller gain variation problems, and presents both the centralized and the distributed solutions. The first two chapters provide an introduction to networked control systems and basic information on system analysis. Chapters (3–6) then discuss the centralized filtering of wireless networked systems, presenting different approaches to deal with energy efficiency and filter/controller gain variation problems. The next part (chapters 7–10) explores the distributed filtering of wireless networked systems, addressing the main problems of energy constraint and filter gain variation. The final part (chapters 11–14) focuses on the distributed control of wireless networked systems.

  11. FLOWING BILATERAL FILTER: DEFINITION AND IMPLEMENTATIONS

    Directory of Open Access Journals (Sweden)

    Maxime Moreaud

    2015-06-01

    Full Text Available The bilateral filter plays a key role in image processing applications due to its intuitive parameterization and its high quality filter result, smoothing homogeneous regions while preserving the edges of the objects. Considering the image as a topological relief, seeing pixel intensities as peaks and valleys, we introduce a way to control the tonal weighting coefficients, the flowing bilateral filter, reducing "halo" artifacts typically produced by the regular bilateral filter around a large peak surrounded by two valleys of lower values. In this paper we propose to investigate exact and approximated versions of CPU and parallel GPU (Graphical Processing Unit based implementations of the regular and flowing bilateral filter using the NVidia CUDA API. Fast implementations of these filters are important for the processing of large 3D volumes up to several GB acquired by x-ray or electron tomography.

  12. Curved Gabor Filters for Fingerprint Image Enhancement

    CERN Document Server

    Gottschlich, Carsten

    2011-01-01

    Gabor filters play an important role in many application areas for the enhancement of various types of images and the extraction of Gabor features. For the purpose of enhancing curved structures in noisy images, we introduce curved Gabor filters which locally adapt their shape to the direction of flow. These curved Gabor filters enable the choice of filter parameters which increase the smoothing power without creating artifacts in the enhanced image. In this paper, curved Gabor filters are applied to the curved ridge and valley structure of low-quality fingerprint images. First, we combine two orientation field estimation methods in order to obtain a more robust estimation for very noisy images. Next, curved regions are constructed by following the respective local orientation and they are used for estimating the local ridge frequency. Lastly, curved Gabor filters are defined based on curved regions and they are applied for the enhancement of low-quality fingerprint images. Experimental results on the FVC2004...

  13. Neural method of spatiotemporal filter design

    Science.gov (United States)

    Szostakowski, Jaroslaw

    1997-10-01

    There is a lot of applications in medical imaging, computer vision, and the communications, where the video processing is critical. Although many techniques have been successfully developed for the filtering of the still-images, significantly fewer techniques have been proposed for the filtering of noisy image sequences. In this paper the novel approach to spatio- temporal filtering design is proposed. The multilayer perceptrons and functional-link nets are used for the 3D filtering. The spatio-temporal patterns are creating from real motion video images. The neural networks learn these patterns. The perceptrons with different number of layers and neurons in each layer are tested. Also, the different input functions in functional- link net are searched. The practical examples of the filtering are shown and compared with traditional (non-neural) spatio-temporal methods. The results are very interesting and the neural spatio-temporal filters seems to be very efficient tool for video noise reduction.

  14. An Adaptive Iterated Nonlocal Interferometry Filtering Method

    Directory of Open Access Journals (Sweden)

    Lin Xue

    2014-04-01

    Full Text Available Interferometry filtering is one of the key steps in obtain high-precision Digital Elevation Model (DEM and Digital Orthophoto Map (DOM. In the case of low-correlation or complicated topography, traditional phase filtering methods fail in balancing noise elimination and phase preservation, which leads to inaccurate interferometric phase. This paper proposed an adaptive iterated nonlocal interferometry filtering method to deal with the problem. Based on the thought of nonlocal filtering, the proposed method filters the image with utilization of the image redundancy information. The smoothing parameter of the method is adaptive to the interferometry, and automatic iteration, in which the window size is adjusted, is applied to improve the filtering precision. Validity of the proposed method is verified by simulated and real data. Comparison with existed methods is given at the same time.

  15. Multiway Filtering Based on Multilinear Algebra Tools

    Directory of Open Access Journals (Sweden)

    Salah Bourennane

    2010-03-01

    Full Text Available This paper presents some recent filtering methods based on the lower-rank tensor approximation approach for denoising tensor signals. In this approach, multicomponent data are represented by tensors, that is, multiway arrays, and the presented tensor filtering methods rely on multilinear algebra. First, the classical channel-by-channel SVD-based filtering method is overviewed. Then, an extension of the classical matrix filtering method is presented. It is based on the lower rank- K ,...,Kn  1 truncation of the HOSVD which performsa multimode Principal Component Analysis (PCA and is implicitly developed for an additive white Gaussian noise. Two tensor filtering methods recently developed by the authors are also overviewed. The performances and comparative results between all these tensor filtering methods are presented for the cases of noise reduction in color images.

  16. Multiway Filtering Based on Multilinear Algebra Tools

    Science.gov (United States)

    Bourennane, Salah; Fossati, Caroline

    This paper presents some recent filtering methods based on the lower-rank tensor approximation approach for denoising tensor signals. In this approach, multicomponent data are represented by tensors, that is, multiway arrays, and the presented tensor filtering methods rely on multilinear algebra. First, the classical channel-by-channel SVD-based filtering method is overviewed. Then, an extension of the classical matrix filtering method is presented. It is based on the lower rank-(K 1,...,K N ) truncation of the HOSVD which performs a multimode Principal Component Analysis (PCA) and is implicitly developed for an additive white Gaussian noise. Two tensor filtering methods recently developed by the authors are also overviewed. The performances and comparative results between all these tensor filtering methods are presented for the cases of noise reduction in color images.

  17. Design of Kalman filters for mobile robots

    DEFF Research Database (Denmark)

    Larsen, Thomas Dall; Hansen, Karsten L.; Andersen, Nils Axel

    1999-01-01

    Kalman filters have for a long time been widely used on mobile robots as a location estimator. Many different Kalman filter designs have been proposed, using models of various complexity. In this paper, two different design methods are evaluated and compared. Focus is put on the common setup where...... the mobile robot is equipped with a dual encoder system supported by some additional absolute measurements. A common filter type for this setup is the odometric filter, where readings from the odometry system on the robot are used together with the geometry of the robot movement as a model of the robot....... If additional kinematic assumptions are made, for instance regarding the velocity of the robot, an augmented model can be used instead. This kinematic filter has some advantages when used intelligently, and it is shown how this type of filter can be used to suppress noise on encoder readings and velocity...

  18. Effectiveness and Limitations of Statistical Spam Filters

    CERN Document Server

    Banday, M Tariq

    2009-01-01

    In this paper we discuss the techniques involved in the design of the famous statistical spam filters that include Naive Bayes, Term Frequency-Inverse Document Frequency, K-Nearest Neighbor, Support Vector Machine, and Bayes Additive Regression Tree. We compare these techniques with each other in terms of accuracy, recall, precision, etc. Further, we discuss the effectiveness and limitations of statistical filters in filtering out various types of spam from legitimate e-mails.

  19. Sensitivity filtering from a continuum mechanics perspective

    DEFF Research Database (Denmark)

    Sigmund, Ole; Maute, Kurt

    2012-01-01

    In topology optimization filtering is a popular approach for preventing numerical instabilities. This short note shows that the well-known sensitivity filtering technique, that prevents checkerboards and ensures mesh-independent designs in density-based topology optimization, is equivalent to min...... to minimizing compliance for nonlocal elasticity problems known from continuum mechanics. Hence, the note resolves the long-standing quest for finding an explanation and physical motivation for the sensitivity filter....

  20. Degradation of HEPA filters exposed to DMSO

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Larsen, G. [Lawrence Livermore National Laboratory, CA (United States)] [and others

    1995-02-01

    Dimethyl sulfoxide (DMSO) sprays are being used to remove the high explosive (HE) from nuclear weapons in the process of their dismantlement. A boxed 50 cmf HEPA filter with an integral prefilter was exposed to DMSO vapor and aerosols that were generated by a spray nozzle to simulate conditions expected in the HE dissolution operation. After 198 hours of operation, the pressure drop of the filter had increased form 1.15 inches to 2,85 inches, and the efficiency for 0.3 {mu}m dioctyl sebacate (DOS) aerosols decreased form 99.992% to 98.6%. Most of the DMSO aerosols had collected as a liquid pool inside the boxed HEPA. The liquid was blown out of the filter exit with 100 cmf air flow at the end of the test. Since the filter still met the minimum allowed efficiency of 99.97% after 166 hours of exposure, we recommend replacing the filter every 160 hours of operation or sooner if the pressure drop increases by 50%. Examination of the filter showed that visible cracks appeared at the joints of the wooden frame and a portion of the sealant had pulled away from the frame. Since all of the DMSO will be trapped in the first HEPA filter, the second HEPA filter should not suffer from DMSO degradation. Thus the combined efficiency for the first filter (98.6%) and the second filter (99.97%) is 99.99996% for 0.3 {mu}m particles. If the first filter is replaced prior to its degradation, each of the filters will have 99.97% efficiency, and the combined efficiency will be 99.999991%. The collection efficiency for DMSO/HE aerosols will be much higher because the particle size is much greater.

  1. Varactor-tuned Substrate Integrated Evanescent Filter

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Acar, Öncel; Dong, Yunfeng

    is considered. In contrast to other methods described in the literature, it avoids etching split ring resonators in the metal layer of the SIW. The filters presented here use varactors as tuning elements. The varactors (as well as DC decoupling circuits) are mounted on the surface of PCB bringing the lower......, fabricated and tested in order to validate the developed filter models as well as the implemented realization method. The filter structure as well as its tuning are shown in Figure 1....

  2. Diesel particulate filter with zoned resistive heater

    Science.gov (United States)

    Gonze, Eugene V [Pinckney, MI

    2011-03-08

    A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

  3. Computation of Filters by Sampling and Quantization.

    Science.gov (United States)

    1987-09-01

    gbnbral de filtrage non-Lin6aire et equations differentielles stochastiques associees, Ann. Inst. Henri Poincare, B 15(2). 147-173. [23] J.H. Van Schuppen...motivation of research has been the solution of the filtering equation . Since in the linear case the filtering equation has an explicit solution, the early...probability method ([1], (22]. [25]) allowing the derivation of the Zakai equation , has opened a new way to considering the filtering problem. Although there

  4. Low Pass Filters with Linear Phase.

    Science.gov (United States)

    1985-12-12

    DISCUSSION OF RESULTS............................... 35 LIST OF ILLUSTRATIONS Figure page 1. Template applicable to single stage linear phase filter .................. 2...technology suggests examination of the low-pass lin- ear phase filter as a means of prefiltering such data before, or concurrently with, sam- pling. Today, a...stage low passlinear phase filter . Here, M is the number of "main poles". A linear phase design alsorequires a minimum overhead of two "corrector poles

  5. Implementation of Kalman Filter with Python Language

    CERN Document Server

    Laaraiedh, Mohamed

    2012-01-01

    In this paper, we investigate the implementation of a Python code for a Kalman Filter using the Numpy package. A Kalman Filtering is carried out in two steps: Prediction and Update. Each step is investigated and coded as a function with matrix input and output. These different functions are explained and an example of a Kalman Filter application for the localization of mobile in wireless networks is given.

  6. CHANGE DETECTION VIA SELECTIVE GUIDED CONTRASTING FILTERS

    Directory of Open Access Journals (Sweden)

    Y. V. Vizilter

    2017-05-01

    Full Text Available Change detection scheme based on guided contrasting was previously proposed. Guided contrasting filter takes two images (test and sample as input and forms the output as filtered version of test image. Such filter preserves the similar details and smooths the non-similar details of test image with respect to sample image. Due to this the difference between test image and its filtered version (difference map could be a basis for robust change detection. Guided contrasting is performed in two steps: at the first step some smoothing operator (SO is applied for elimination of test image details; at the second step all matched details are restored with local contrast proportional to the value of some local similarity coefficient (LSC. The guided contrasting filter was proposed based on local average smoothing as SO and local linear correlation as LSC. In this paper we propose and implement new set of selective guided contrasting filters based on different combinations of various SO and thresholded LSC. Linear average and Gaussian smoothing, nonlinear median filtering, morphological opening and closing are considered as SO. Local linear correlation coefficient, morphological correlation coefficient (MCC, mutual information, mean square MCC and geometrical correlation coefficients are applied as LSC. Thresholding of LSC allows operating with non-normalized LSC and enhancing the selective properties of guided contrasting filters: details are either totally recovered or not recovered at all after the smoothing. These different guided contrasting filters are tested as a part of previously proposed change detection pipeline, which contains following stages: guided contrasting filtering on image pyramid, calculation of difference map, binarization, extraction of change proposals and testing change proposals using local MCC. Experiments on real and simulated image bases demonstrate the applicability of all proposed selective guided contrasting filters. All

  7. Change Detection via Selective Guided Contrasting Filters

    Science.gov (United States)

    Vizilter, Y. V.; Rubis, A. Y.; Zheltov, S. Y.

    2017-05-01

    Change detection scheme based on guided contrasting was previously proposed. Guided contrasting filter takes two images (test and sample) as input and forms the output as filtered version of test image. Such filter preserves the similar details and smooths the non-similar details of test image with respect to sample image. Due to this the difference between test image and its filtered version (difference map) could be a basis for robust change detection. Guided contrasting is performed in two steps: at the first step some smoothing operator (SO) is applied for elimination of test image details; at the second step all matched details are restored with local contrast proportional to the value of some local similarity coefficient (LSC). The guided contrasting filter was proposed based on local average smoothing as SO and local linear correlation as LSC. In this paper we propose and implement new set of selective guided contrasting filters based on different combinations of various SO and thresholded LSC. Linear average and Gaussian smoothing, nonlinear median filtering, morphological opening and closing are considered as SO. Local linear correlation coefficient, morphological correlation coefficient (MCC), mutual information, mean square MCC and geometrical correlation coefficients are applied as LSC. Thresholding of LSC allows operating with non-normalized LSC and enhancing the selective properties of guided contrasting filters: details are either totally recovered or not recovered at all after the smoothing. These different guided contrasting filters are tested as a part of previously proposed change detection pipeline, which contains following stages: guided contrasting filtering on image pyramid, calculation of difference map, binarization, extraction of change proposals and testing change proposals using local MCC. Experiments on real and simulated image bases demonstrate the applicability of all proposed selective guided contrasting filters. All implemented

  8. Adjustable Fiber Optic Microwave Transversal Filters

    Science.gov (United States)

    Shadaram, Mehdi; Lutes, George F.; Logan, Ronald T.; Maleki, Lutfollah

    1994-01-01

    Microwave transversal filters implemented as adjustable tapped fiber optic delay lines developed. Main advantages of these filters (in comparison with conventional microwave transversal filters) are small size, light weight, no need for matching of radio-frequency impedances, no need for shielding against electromagnetic radiation at suboptical frequencies, no need for mechanical tuning, high stability of amplitude and phase, and active control of transfer functions. Weights of taps in fiber optic delay lines adjusted.

  9. Particle Filters for Positioning, Navigation and Tracking

    OpenAIRE

    Gustafsson, Fredrik; Gunnarsson, Fredrik; Bergman, Niclas; Forssell, Urban; Jansson, Jonas; Karlsson, Rickard; Nordlund, Per-Johan

    2001-01-01

    A framework for positioning, navigation and tracking problems using particle filters (sequential Monte Carlo methods) is developed. It consists of a class of motion models and a general non-linear measurement equation in position. A general algorithm is presented, which is parsimonious with the particle dimension. It is based on marginalization, enabling a Kalman filter to estimate all position derivatives, and the particle filter becomes low-dimensional. This is of utmost importance for high...

  10. Polarization control based interference microwave photonic filters

    Science.gov (United States)

    Madziar, Krzysztof; Galwas, Bogdan

    2016-12-01

    In this paper we present a concept of multi-line Microwave Photonic Filter (MPF) based on polarization beam splitting and polarization control in each line. Coefficients of investigated filter are determined by attenuation of its lines and that on the other hand can be manipulated by change of the polarization in the fiber. Presented results involve scattering parameters (S21) measurements of optical path over polarization control unit rotation, scattering parameters (S21) characteristics of investigated filter and transmission optimization capabilities.

  11. Design of active N-path filters

    NARCIS (Netherlands)

    Darvishi, Milad; Zee, van der Ronan; Nauta, Bram

    2013-01-01

    A design methodology for synthesis of active N-path bandpass filters is introduced. Based on this methodology, a 0.1-to-1.2 GHz tunable 6th-order N-path channel-select filter in 65 nm LP CMOS is introduced. It is based on coupling N-path filters with gyrators, achieving a “flat” passband shape and h

  12. Zone heated diesel particulate filter electrical connection

    Science.gov (United States)

    Gonze, Eugene V.; Paratore, Jr., Michael J.

    2010-03-30

    An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

  13. Beams Propagation Modelled by Bi-filters

    OpenAIRE

    Lacaze, Bernard

    2010-01-01

    In acoustic, ultrasonic or electromagnetic propagation, crossed media are often modelled by linear filters with complex gains in accordance with the Beer-Lambert law. This paper addresses the problem of propagation in media where polarization has to be taken into account. Because waves are now bi-dimensional, an unique filter is not sufficient to represent the effects of the medium. We propose a model which uses four linear invariant filters, which allows to take into account exchanges betwee...

  14. Theory and design of microwave filters

    CERN Document Server

    Hunter, Ian

    2000-01-01

    This is a thorough, graduate-level text which provides a single source for filter design including basic circuit theory, network synthesis and the design of a variety of microwave filter structures. The aim is to present design theories followed by specific examples with numerical simulations of the designs, with pictures of real devices wherever possible. The book is aimed at designers, engineers and researchers working in microwave electronics who need to design or specify filters.

  15. Unscented Kalman filter for SINS alignment

    Institute of Scientific and Technical Information of China (English)

    Zhou Zhanxin; Gao Yanan; Chen Jiabin

    2007-01-01

    In order to improve the filter accuracy for the nonlinear error model of strapdown inertial navigation system (SINS) alignment, Unscented Kalman Filter (UKF) is presented for simulation with stationary base and moving base of SINS alignment.Simulation results show the superior performance of this approach when compared with classical suboptimal techniques such as extended Kalman filter in cases of large initial misalignment.The UKF has good performance in case of small initial misalignment.

  16. A latent model for collaborative filtering

    DEFF Research Database (Denmark)

    Langseth, Helge; Nielsen, Thomas Dyhre

    2012-01-01

    Recommender systems based on collaborative filtering have received a great deal of interest over the last two decades. In particular, recently proposed methods based on dimensionality reduction techniques and using a symmetrical representation of users and items have shown promising results....... Following this line of research, we propose a probabilistic collaborative filtering model that explicitly represents all items and users simultaneously in the model. Experimental results show that the proposed system obtains significantly better results than other collaborative filtering systems (evaluated...

  17. Particle Kalman Filtering: A Nonlinear Bayesian Framework for Ensemble Kalman Filters*

    KAUST Repository

    Hoteit, Ibrahim

    2012-02-01

    This paper investigates an approximation scheme of the optimal nonlinear Bayesian filter based on the Gaussian mixture representation of the state probability distribution function. The resulting filter is similar to the particle filter, but is different from it in that the standard weight-type correction in the particle filter is complemented by the Kalman-type correction with the associated covariance matrices in the Gaussian mixture. The authors show that this filter is an algorithm in between the Kalman filter and the particle filter, and therefore is referred to as the particle Kalman filter (PKF). In the PKF, the solution of a nonlinear filtering problem is expressed as the weighted average of an “ensemble of Kalman filters” operating in parallel. Running an ensemble of Kalman filters is, however, computationally prohibitive for realistic atmospheric and oceanic data assimilation problems. For this reason, the authors consider the construction of the PKF through an “ensemble” of ensemble Kalman filters (EnKFs) instead, and call the implementation the particle EnKF (PEnKF). It is shown that different types of the EnKFs can be considered as special cases of the PEnKF. Similar to the situation in the particle filter, the authors also introduce a resampling step to the PEnKF in order to reduce the risk of weights collapse and improve the performance of the filter. Numerical experiments with the strongly nonlinear Lorenz-96 model are presented and discussed.

  18. SHBG (Sex Hormone Binding Globulin)

    Science.gov (United States)

    ... as: Testosterone-estrogen Binding Globulin; TeBG Formal name: Sex Hormone Binding Globulin Related tests: Testosterone , Free Testosterone, ... I should know? How is it used? The sex hormone binding globulin (SHBG) test may be used ...

  19. IMPROVED MLV FILTER TO REMOVE MULTIPLICATIVE NOISE

    Institute of Scientific and Technical Information of China (English)

    Li Weibin; Liu Fang; Jiao Licheng; Zhang Shuling; Li Zongling

    2006-01-01

    More methods can be used to remove the additive noise, such as the Mean of Least Variance (MLV)filter. When the signal is noised by the multiplicative noise, it is difficult to remove. The paper presents an improved filter to remove multiplicative noise by changing the multiplicative noise to the additive noise, and then using the MLV-like to remove the additive noise. The simulation results show that the performance is better than Minimum Coefficient of Variation (MCV) filter and MLV filter. Both one-dimension and image experiments demonstrate its theoretical performance.

  20. Frequency Domain Image Filtering Using CUDA

    Directory of Open Access Journals (Sweden)

    Muhammad Awais Rajput

    2014-10-01

    Full Text Available In this paper, we investigate the implementation of image filtering in frequency domain using NVIDIA?s CUDA (Compute Unified Device Architecture. In contrast to signal and image filtering in spatial domain which uses convolution operations and hence is more compute-intensive for filters having larger spatial extent, the frequency domain filtering uses FFT (Fast Fourier Transform which is much faster and significantly reduces the computational complexity of the filtering. We implement the frequency domain filtering on CPU and GPU respectively and analyze the speed-up obtained from the CUDA?s parallel processing paradigm. In order to demonstrate the efficiency of frequency domain filtering on CUDA, we implement three frequency domain filters, i.e., Butterworth, low-pass and Gaussian for processing different sizes of images on CPU and GPU respectively and perform the GPU vs. CPU benchmarks. The results presented in this paper show that the frequency domain filtering with CUDA achieves significant speed-up over the CPU processing in frequency domain with the same level of (output image quality on both the processing architectures

  1. Auditory filters at low-frequencies

    DEFF Research Database (Denmark)

    Orellana, Carlos Andrés Jurado; Pedersen, Christian Sejer; Møller, Henrik

    2009-01-01

    Prediction and assessment of low-frequency noise problems requires information about the auditory filter characteristics at low-frequencies. Unfortunately, data at low-frequencies is scarce and practically no results have been published for frequencies below 100 Hz. Extrapolation of ERB results......-ear transfer function), the asymmetry of the auditory filter changed from steeper high-frequency slopes at 1000 Hz to steeper low-frequency slopes below 100 Hz. Increasing steepness at low-frequencies of the middle-ear high-pass filter is thought to cause this effect. The dynamic range of the auditory filter...

  2. Euclidean Quantum Mechanics and Universal Nonlinear Filtering

    Directory of Open Access Journals (Sweden)

    Bhashyam Balaji

    2009-02-01

    Full Text Available An important problem in applied science is the continuous nonlinear filtering problem, i.e., the estimation of a Langevin state that is observed indirectly. In this paper, it is shown that Euclidean quantum mechanics is closely related to the continuous nonlinear filtering problem. The key is the configuration space Feynman path integral representation of the fundamental solution of a Fokker-Planck type of equation termed the Yau Equation of continuous-continuous filtering. A corollary is the equivalence between nonlinear filtering problem and a time-varying Schr¨odinger equation.

  3. Wave disturbance filtering in dynamic positioning systems

    Directory of Open Access Journals (Sweden)

    Tor S. Schei

    1996-04-01

    Full Text Available Three different approaches to wave disturbance filtering in dynamic positioning systems are studied in this paper. It is shown that a conventional design based on notch filters leads to approximately the same achievable performance of the total control system as can be achieved with an observer based design. It is also shown that a proposed passivity based design leads to a conventional filter with PD-controller. However, there is a relation between the parameters in the filter and the PD-controller, which ensures the passivity properties of the control system.

  4. Filter unit for use at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Ciliberti, D.F.; Lippert, T.E.

    1988-04-05

    A filtering unit for the filtering of particulates from a particulate-containing high temperature gas stream is described comprising a ceramic, tubular filter element, having a closed bottom and side walls and an open top at the upper region thereof, disposed in an aperture in a tube sheet. The walls of the tube sheet about the aperature have an inwardly extending flange thereon, with the open top of the ceramic, tubular filter element adjacent one surface of the tube sheet where filtered gases are discharged, and the closed bottom and side walls exposed to the area of the opposite surface of the tube sheet where a particulate-containing high temperature gas stream to be filtered is present. A ceramic spiral spring is provided at an end of the ceramic, tubular filter element to bias the upper region of the ceramic, tubular filter element into contact with the flange so as to seal the ceramic, tubular filter element to the flange on the tube sheet.

  5. Low cost inlet filters for rainwater tanks

    OpenAIRE

    Martinson, Brett; Thomas, T.

    2005-01-01

    Inlet filters are a common method for enhancing water quality in rainwater harvesting systems. They range from cheap cloth or gravel filters to complex and expensive multi-stage systems. Field experience has shown, however that filters often suffer from a lack of maintenance so self-cleaning is an advantage. Filters can clean themselves by dividing the water stream into two components; the first and largest is the clean water passed to the tank, the second much smaller component can be used t...

  6. CHANGE DETECTION VIA MORPHOLOGICAL COMPARATIVE FILTERS

    Directory of Open Access Journals (Sweden)

    Y. V. Vizilter

    2016-06-01

    Full Text Available In this paper we propose the new change detection technique based on morphological comparative filtering. This technique generalizes the morphological image analysis scheme proposed by Pytiev. A new class of comparative filters based on guided contrasting is developed. Comparative filtering based on diffusion morphology is implemented too. The change detection pipeline contains: comparative filtering on image pyramid, calculation of morphological difference map, binarization, extraction of change proposals and testing change proposals using local morphological correlation coefficient. Experimental results demonstrate the applicability of proposed approach.

  7. Change Detection via Morphological Comparative Filters

    Science.gov (United States)

    Vizilter, Y. V.; Rubis, A. Y.; Zheltov, S. Y.; Vygolov, O. V.

    2016-06-01

    In this paper we propose the new change detection technique based on morphological comparative filtering. This technique generalizes the morphological image analysis scheme proposed by Pytiev. A new class of comparative filters based on guided contrasting is developed. Comparative filtering based on diffusion morphology is implemented too. The change detection pipeline contains: comparative filtering on image pyramid, calculation of morphological difference map, binarization, extraction of change proposals and testing change proposals using local morphological correlation coefficient. Experimental results demonstrate the applicability of proposed approach.

  8. Satisfactory Optimization Design of IIR Digital Filters

    Institute of Scientific and Technical Information of China (English)

    Jin Weidong; Zhang Gexiang; Zhao Duo

    2005-01-01

    A new method called satisfactory optimization method is proposed to design IIR (Infinite Impulse Response) digital filters, and the satisfactory optimization model is presented. The detailed algorithm of designing IIR digital filters using satisfactory optimization method is described. By using quantum genetic algorithm characterized by rapid convergence and good global search capability, the satisfying solutions are achieved in the experiment of designing lowpass and bandpass IIR digital filters. Experimental results show that the performances of IIR filters designed by the introduced method are better than those by traditional methods.

  9. Hot-Gas Filter Ash Characterization Project

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, M.L.; Hurley, J.P.; Dockter, B.A.; O`Keefe, C.A.

    1997-07-01

    Large-scale hot-gas filter testing over the past 10 years has revealed numerous cases of cake buildup on filter elements that has been difficult, if not impossible, to remove. At times, the cake can blind or bridge between candle filters, leading to filter failure. Physical factors, including particle-size distribution, particle shape, the aerodynamics of deposition, and system temperature, contribute to the difficulty in removing the cake, but chemical factors such as surface composition and gas-solid reactions also play roles in helping to bond the ash to the filters or to itself. This project is designed to perform the research necessary to determine the fuel-, sorbent-, and operations-related conditions that lead to blinding or bridging of hot-gas particle filters. The objectives of the project are threefold: (1) Determine the mechanisms by which a difficult-to-clean ash is formed and how it bridges hot-gas filters (2) Develop a method to determine the rate of bridging based on analyses of the feed coal and sorbent, filter properties, and system operating conditions and (3) Suggest and test ways to prevent filter bridging.

  10. Harmonic Detection at Initialization With Kalman Filter

    DEFF Research Database (Denmark)

    Hussain, Dil Muhammad Akbar; Imran, Raja Muhammad; Shoro, Ghulam Mustafa

    2014-01-01

    the affect of harmonics on the supply. For the detection of these harmonics various techniques are available and one of that technique is the Kalman filter. In this paper we investigate that what are the consequences when harmonic detection system based on Kalman Filtering is initialized......Most power electronic equipment these days generate harmonic disturbances, these devices hold nonlinear voltage/current characteristic. The harmonics generated can potentially be harmful to the consumer supply. Typically, filters are integrated at the power source or utility location to filter out...

  11. Discrete stochastic processes and optimal filtering

    CERN Document Server

    Bertein, Jean-Claude

    2012-01-01

    Optimal filtering applied to stationary and non-stationary signals provides the most efficient means of dealing with problems arising from the extraction of noise signals. Moreover, it is a fundamental feature in a range of applications, such as in navigation in aerospace and aeronautics, filter processing in the telecommunications industry, etc. This book provides a comprehensive overview of this area, discussing random and Gaussian vectors, outlining the results necessary for the creation of Wiener and adaptive filters used for stationary signals, as well as examining Kalman filters which ar

  12. Automatic Target Detection by Optimal Morphological Filters

    Institute of Scientific and Technical Information of China (English)

    YU Nong(余农); WU Hao(吴昊); WU ChangYong(吴常泳); LI YuShu(李予蜀)

    2003-01-01

    It is widely accepted that the design of morphological filters, which are optimal in some sense, is a difficult task. In this paper a novel method for optimal learning of morphological filtering parameters (Genetic training algorithm for morphological filters, GTAMF) is presented.GTAMF adopts new crossover and mutation operators called the curved cylinder crossover and master-slave mutation to achieve optimal filtering parameters in a global searching. Experimental results show that this method is practical, easy to extend, and markedly improves the performances of morphological filters. The operation of a morphological filter can be divided into two basic problems including morphological operation and structuring element (SE) selection. The rules for morphological operations are predefined so that the filter's properties depend merely on the selection of SE. By means of adaptive optimization training, structuring elements possess the shape and structural characteristics of image targets, and give specific information to SE. Morphological filters formed in this way become certainly intelligent and can provide good filtering results and robust adaptability to image targets with clutter background.

  13. Microwave filters and circuits contributions from Japan

    CERN Document Server

    Matsumoto, Akio

    1970-01-01

    Microwave Filters and Circuits: Contributions from Japan covers ideas and novel circuits used to design microwave filter that have been developed in Japan, as well as network theory into the field of microwave transmission networks. The book discusses the general properties and synthesis of transmission-line networks; transmission-line filters on the image-parameter basis; and experimental results on a class of transmission-line filter constructed only with commensurate TEM lossless transmission lines. The text describes lines constants, approximation problems in transmission-line networks, as

  14. Optical results with Rayleigh quotient discrimination filters

    Science.gov (United States)

    Juday, Richard D.; Rollins, John M.; Monroe, Stanley E., Jr.; Morelli, Michael V.

    1999-03-01

    We report experimental laboratory results using filters that optimize the Rayleigh quotient [Richard D. Juday, 'Generalized Rayleigh quotient approach to filter optimization,' JOSA-A 15(4), 777-790 (April 1998)] for discriminating between two similar objects. That quotient is the ratio of the correlation responses to two differing objects. In distinction from previous optical processing methods it includes the phase of both objects -- not the phase of only the 'accept' object -- in the computation of the filter. In distinction from digital methods it is explicitly constrained to optically realizable filter values throughout the optimization process.

  15. A potassium Faraday anomalous dispersion optical filter

    Science.gov (United States)

    Yin, B.; Shay, T. M.

    1992-01-01

    The characteristics of a potassium Faraday anomalous dispersion optical filter operating on the blue and near infrared transitions are calculated. The results show that the filter can be designed to provide high transmission, very narrow pass bandwidth, and low equivalent noise bandwidth. The Faraday anomalous dispersion optical filter (FADOF) provides a narrow pass bandwidth (about GHz) optical filter for laser communications, remote sensing, and lidar. The general theoretical model for the FADOF has been established in our previous paper. In this paper, we have identified the optimum operational conditions for a potassium FADOF operating on the blue and infrared transitions. The signal transmission, bandwidth, and equivalent noise bandwidth (ENBW) are also calculated.

  16. The intractable cigarette ‘filter problem’

    Science.gov (United States)

    2011-01-01

    Background When lung cancer fears emerged in the 1950s, cigarette companies initiated a shift in cigarette design from unfiltered to filtered cigarettes. Both the ineffectiveness of cigarette filters and the tobacco industry's misleading marketing of the benefits of filtered cigarettes have been well documented. However, during the 1950s and 1960s, American cigarette companies spent millions of dollars to solve what the industry identified as the ‘filter problem’. These extensive filter research and development efforts suggest a phase of genuine optimism among cigarette designers that cigarette filters could be engineered to mitigate the health hazards of smoking. Objective This paper explores the early history of cigarette filter research and development in order to elucidate why and when seemingly sincere filter engineering efforts devolved into manipulations in cigarette design to sustain cigarette marketing and mitigate consumers' concerns about the health consequences of smoking. Methods Relevant word and phrase searches were conducted in the Legacy Tobacco Documents Library online database, Google Patents, and media and medical databases including ProQuest, JSTOR, Medline and PubMed. Results 13 tobacco industry documents were identified that track prominent developments involved in what the industry referred to as the ‘filter problem’. These reveal a period of intense focus on the ‘filter problem’ that persisted from the mid-1950s to the mid-1960s, featuring collaborations between cigarette producers and large American chemical and textile companies to develop effective filters. In addition, the documents reveal how cigarette filter researchers' growing scientific knowledge of smoke chemistry led to increasing recognition that filters were unlikely to offer significant health protection. One of the primary concerns of cigarette producers was to design cigarette filters that could be economically incorporated into the massive scale of cigarette

  17. Artificial spectral filtering in dissipative soliton fiber lasers with invisible bandpass filters

    Institute of Scientific and Technical Information of China (English)

    Kong Ling-Jie; Xiao Xiao-Sheng; Yang Chang-Xi

    2012-01-01

    We numerically study the artificial spectral-filtering effect in dissipative soliton fiber lasers without intracavity spectral filters.It is found that in dissipative soliton lasers with real saturable absorbers (SAs),the dynamic spectral filtering of the real SAs serves as an artificial spectral filter and contributes to the pulse shaping.While in the dissipative soliton lasers with artificial SAs,such as nonlinear polarization rotation,the spectral filtering introduced by the intracavity polarization-dependent components acts as an artificial spectral filter and shapes the pulses to obtain modelocking. An investigation of the artificial spectral-filtering effect reveals the operating mechanisms of the dissipative soliton fiber lasers without visible bandpass filters.

  18. Estimation of Upper Bound for Order of Filters used in Perfect Reconstruction Filter Banks

    Directory of Open Access Journals (Sweden)

    B. R. Nagendra

    2014-07-01

    Full Text Available Filter banks are widely used in variety of applications such as signal compression, multi-channel transmission, conditioning of power supply, coding and decoding of signals, etc. Perfect reconstruction filter banks are used in the applications where it is essential to reconstruct the original signal with minimum errors. Compression of satellite vibration test data is one such application where perfect reconstruction filter banks can be used to design wavelets. These wavelets are used in transform coding stage of compression algorithm. It is required to have higher order for filters used in perfect reconstruction filter banks, to ensure better filter characteristics. The study carried out in this work, estimates the upper bound for order that can be assigned to filters used in perfect reconstruction filter banks

  19. Vertically Coupled Microring Resonator Filter :Versatile Building Block for VLSI Filter Circuits

    Institute of Scientific and Technical Information of China (English)

    Yasuo; Kokubun

    2003-01-01

    In this review, the recent progress in the development of vertically coupled micro-ring resonator filters is summarized and the potential applications of the filters leading to the development of VLSI photonics are described.

  20. Vertically Coupled Microring Resonator Filter : Versatile Building Block for VLSI Filter Circuits

    Institute of Scientific and Technical Information of China (English)

    Yasuo Kokubun

    2003-01-01

    In this review, the recent progress in the development of vertically coupled micro-ring resonator filters is summarized and the potential applications of the filters leading to the development of VLSI photonics are described.

  1. Spectral diagonal ensemble Kalman filters

    CERN Document Server

    Kasanický, Ivan; Vejmelka, Martin

    2015-01-01

    A new type of ensemble Kalman filter is developed, which is based on replacing the sample covariance in the analysis step by its diagonal in a spectral basis. It is proved that this technique improves the aproximation of the covariance when the covariance itself is diagonal in the spectral basis, as is the case, e.g., for a second-order stationary random field and the Fourier basis. The method is extended by wavelets to the case when the state variables are random fields, which are not spatially homogeneous. Efficient implementations by the fast Fourier transform (FFT) and discrete wavelet transform (DWT) are presented for several types of observations, including high-dimensional data given on a part of the domain, such as radar and satellite images. Computational experiments confirm that the method performs well on the Lorenz 96 problem and the shallow water equations with very small ensembles and over multiple analysis cycles.

  2. Cacti and filtered distributive laws

    CERN Document Server

    Dotsenko, Vladimir

    2011-01-01

    Motivated by the second author's construction of a classifying space for the group of pure symmetric automorphisms of a free product, we introduce and study a family of topological operads, the operads of based cacti, defined for every pointed topological space $(Y,\\bullet)$. These operads also admit linear versions, which are defined for every augmented graded cocommutative coalgebra $C$. We show that the homology of the topological operad of based $Y$-cacti is the linear operad of based $H_*(Y)$-cacti. In addition, we show that for every coalgebra $C$ the operad of based $C$-cacti is Koszul. To prove the latter result, we use the criterion of Koszulness for operads due to the first author, utilising the notion of a filtered distributive law between two quadratic operads. We also present a new proof of that criterion which works over the ground field of arbitrary characteristic.

  3. New control algorithm for shunt active filters, based on self-tuned vector filter

    OpenAIRE

    Perales Esteve, Manuel Ángel; Mora Jiménez, José Luis; Carrasco Solís, Juan Manuel; García Franquelo, Leopoldo

    2001-01-01

    A new, improved, method for calculating the reference of a shunt active filter is presented. This method lays on a filter, which is able to extract the main component of a vector signal. This filter acts as a Phase-Locked Loop, capturing a particular frequency. The output of this filter is in phase with the frequency isolated, and has its amplitude. Simulation and experimental results confirms the validity of the proposed algorithm.

  4. Retrievable Inferior Vena Cava Filters in Trauma Patients: Prevalence and Management of Thrombus Within the Filter.

    Science.gov (United States)

    Pan, Y; Zhao, J; Mei, J; Shao, M; Zhang, J; Wu, H

    2016-12-01

    The incidence of thrombus was investigated within retrievable filters placed in trauma patients with confirmed DVT at the time of retrieval and the optimal treatment for this clinical scenario was assessed. A technique called "filter retrieval with manual negative pressure aspiration thrombectomy" for management of filter thrombus was introduced and assessed. The retrievable filters referred for retrieval between January 2008 and December 2015 were retrospectively reviewed to determine the incidence of filter thrombus on a pre-retrieval cavogram. The clinical outcomes of different managements for thrombus within filters were recorded and analyzed. During the study 764 patients having Aegisy Filters implanted were referred for filter removal, from which 236 cases (134 male patients, mean age 50.2 years) of thrombus within the filter were observed on initial pre-retrieval IVC venogram 12-39 days after insertion (average 16.9 days). The incidence of infra-filter thrombus was 30.9%, and complete occlusion of the filter bearing IVC was seen in 2.4% (18) of cases. Retrieval was attempted in all 121 cases with small clots using a regular snare and sheath technique, and was successful in 120. A total of 116 cases with massive thrombus and IVC occlusion by thrombus were treated by CDT and/or the new retrieval technique. Overall, 213 cases (90.3%) of thrombus in the filter were removed successfully without PE. A small thrombus within the filter can be safely removed without additional management. CDT for reduction of the clot burden in filters was effective and safe. Filter retrieval with manual negative pressure aspiration thrombectomy seemed reasonable and valuable for management of massive thrombus within filters in some patients. Full assessment of the value and safety of this technique requires additional studies. Copyright © 2016 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

  5. Approximating Spline filter: New Approach for Gaussian Filtering in Surface Metrology

    Directory of Open Access Journals (Sweden)

    Hao Zhang

    2009-10-01

    Full Text Available This paper presents a new spline filter named approximating spline filter for surface metrology. The purpose is to provide a new approach of Gaussian filter and evaluate the characteristics of an engineering surface more accurately and comprehensively. First, the configuration of approximating spline filter is investigated, which describes that this filter inherits all the merits of an ordinary spline filter e.g. no phase distortion and no end distortion. Then, the approximating coefficient selection is discussed, which specifies an important property of this filter-the convergence to Gaussian filter. The maximum approximation deviation between them can be controlled below 4.36% , moreover, be decreased to less than 1% when cascaded. Since extended to 2 dimensional (2D filter, the transmission deviation yields within -0.63% : +1.48% . It is proved that the approximating spline filter not only achieves the transmission characteristic of Gaussian filter, but also alleviates the end effect on a data sequence. The whole computational procedure is illustrated and applied to a work piece to acquire mean line whereas a simulated surface to mean surface. These experimental results indicate that this filtering algorithm for 11200 profile points and 2000 × 2000 form data, only spends 8ms and 2.3s respectively.

  6. Robust Ensemble Filtering and Its Relation to Covariance Inflation in the Ensemble Kalman Filter

    KAUST Repository

    Luo, Xiaodong

    2011-12-01

    A robust ensemble filtering scheme based on the H∞ filtering theory is proposed. The optimal H∞ filter is derived by minimizing the supremum (or maximum) of a predefined cost function, a criterion different from the minimum variance used in the Kalman filter. By design, the H∞ filter is more robust than the Kalman filter, in the sense that the estimation error in the H∞ filter in general has a finite growth rate with respect to the uncertainties in assimilation, except for a special case that corresponds to the Kalman filter. The original form of the H∞ filter contains global constraints in time, which may be inconvenient for sequential data assimilation problems. Therefore a variant is introduced that solves some time-local constraints instead, and hence it is called the time-local H∞ filter (TLHF). By analogy to the ensemble Kalman filter (EnKF), the concept of ensemble time-local H∞ filter (EnTLHF) is also proposed. The general form of the EnTLHF is outlined, and some of its special cases are discussed. In particular, it is shown that an EnKF with certain covariance inflation is essentially an EnTLHF. In this sense, the EnTLHF provides a general framework for conducting covariance inflation in the EnKF-based methods. Some numerical examples are used to assess the relative robustness of the TLHF–EnTLHF in comparison with the corresponding KF–EnKF method.

  7. Non-linear DSGE Models, The Central Difference Kalman Filter, and The Mean Shifted Particle Filter

    DEFF Research Database (Denmark)

    Andreasen, Martin Møller

    . The second contribution of this paper is to derive a new particle filter which we term the Mean Shifted Particle Filter (MSPFb). We show that the MSPFb outperforms the standard Particle Filter by delivering more precise state estimates, and in general the MSPFb has lower Monte Carlo variation in the reported...

  8. CARBOHYDRATE-CONTAINING COMPOUNDS WHICH BIND TO CARBOHYDRATE BINDING RECEPTORS

    DEFF Research Database (Denmark)

    1995-01-01

    Carbohydrate-containing compounds which contain saccharides or derivatives thereof and which bind to carbohydrate binding receptors are useful in pharmaceutical products for treatment of inflammatory diseases and other diseases.......Carbohydrate-containing compounds which contain saccharides or derivatives thereof and which bind to carbohydrate binding receptors are useful in pharmaceutical products for treatment of inflammatory diseases and other diseases....

  9. Acoustic bandpass filters employing shaped resonators

    Science.gov (United States)

    Červenka, M.; Bednařík, M.

    2016-11-01

    This work deals with acoustic bandpass filters realized by shaped waveguide-elements inserted between two parts of an acoustic transmission line with generally different characteristic impedance. It is shown that the formation of a wide passband is connected with the eigenfrequency spectrum of the filter element which acts as an acoustic resonator and that the required filter shape substantially depends on whether the filter characteristic impedance is higher or lower than the characteristic impedance of the waveguide. It is further shown that this class of filters can be realized even without the need of different characteristic impedance. A heuristic technique is proposed to design filter shapes with required transmission properties; it is employed for optimization of low-frequency bandpass filters as well as for design of bandpass filters with wide passband surrounded by wide stopbands as it is typical for phononic crystals, however, in this case the arrangement is much simpler as it consists of only one simple-shaped homogeneous element.

  10. Variable Span Filters for Speech Enhancement

    DEFF Research Database (Denmark)

    Jensen, Jesper Rindom; Benesty, Jacob; Christensen, Mads Græsbøll

    2016-01-01

    optimal filters using a joint diagonalization as a basis. This gives excellent control over the performance, as we can optimize for noise reduction or signal distortion performance. Results from real data experiments show that the proposed variable span filters can achieve better performance than existing...

  11. LMS filters for cellular CDMA overlay

    OpenAIRE

    1996-01-01

    This paper extends and complements previous research we have performed on the performance of nonadaptive narrowband suppression filters when used in cellular CDMA overlay situations. In this paper, an adaptive LMS filter is applied to cellular CDMA overlay situations in order to reject narrowband interference.

  12. Interpolation and Iteration for Nonlinear Filters

    CERN Document Server

    Chorin, Alexandre J

    2009-01-01

    We present a general form of the iteration and interpolation process used in implicit particle filters. Implicit filters are based on a pseudo-Gaussian representation of posterior densities, and are designed to focus the particle paths so as to reduce the number of particles needed in nonlinear data assimilation. Examples are given.

  13. Spatial filters for focusing ultrasound images

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt; Gori, Paola

    2001-01-01

    . A new method for making spatial matched filter focusing of RF ultrasound data is proposed based on the spatial impulse response description of the imaging. The response from a scatterer at any given point in space relative to the transducer can be calculated, and this gives the spatial matched filter...

  14. Triple mode filters with coaxial excitation

    NARCIS (Netherlands)

    Gerini, G.; Bustamante, F.D.; Guglielmi, M.

    2004-01-01

    In this paper we describe triple mode filters in a square waveguide with integrated coaxial input/output excitation. An important feature of the structure proposed is that it is easily amenable to an accurate full wave analysis. In addition to theory, a practical six pole filter with two transmissio

  15. Filterability and Sludge Concentration in Membrane Bioreactors

    NARCIS (Netherlands)

    Lousada-Ferreira, M.

    2011-01-01

    The Thesis entitled “Filterability and Sludge Concentration in Membrane Bioreactors” aims at explaining the relation between Mixed Liquid Suspended Solids (MLSS) concentration, the amount of solids in the wastewater being treated, also designated as sludge, and filterability, being the ability of th

  16. Sensory source strength of used ventilation filters

    DEFF Research Database (Denmark)

    Clausen, Geo; Alm, Ole Martin; Fanger, Povl Ole

    2002-01-01

    A two-year-old filter was placed in a ventilation system recirculating the air in an experimental space. Via glass tubes supplied with a small fan it was possible to extract air upstream and downstream of the filter to an adjacent room. A panel could thus perform sensory assessments of the air fr...

  17. Inter modulation noise in trans linear filters

    Energy Technology Data Exchange (ETDEWEB)

    Martini, G.; Svelto, V. [Pavia Univ., Pavia (Italy). Dipt. di Elettronica

    1999-06-01

    The noise properties of trans linear filters operated in class A and class AB is examined, discussing how the output noise power depends on the circuit topology. It is shown that for in band useful signal the output noise does not depend on the relative position of the transistors in the filter.

  18. Advanced Filters and Components for Power Applications

    Science.gov (United States)

    2006-08-31

    not in itself new. In fact, use of coupled magnetic windings in filters dates at least as far back as the 1920’s [4], and has continued up to the...IL CBig Network NetworkAnalyzer output- Figure 8.2: A test circuit for evaluating the filtering performance of magnetic components. The device under

  19. Adaptively robust filtering with classified adaptive factors

    Institute of Scientific and Technical Information of China (English)

    CUI Xianqiang; YANG Yuanxi

    2006-01-01

    The key problems in applying the adaptively robust filtering to navigation are to establish an equivalent weight matrix for the measurements and a suitable adaptive factor for balancing the contributions of the measurements and the predicted state information to the state parameter estimates. In this paper, an adaptively robust filtering with classified adaptive factors was proposed, based on the principles of the adaptively robust filtering and bi-factor robust estimation for correlated observations. According to the constant velocity model of Kalman filtering, the state parameter vector was divided into two groups, namely position and velocity. The estimator of the adaptively robust filtering with classified adaptive factors was derived, and the calculation expressions of the classified adaptive factors were presented. Test results show that the adaptively robust filtering with classified adaptive factors is not only robust in controlling the measurement outliers and the kinematic state disturbing but also reasonable in balancing the contributions of the predicted position and velocity, respectively, and its filtering accuracy is superior to the adaptively robust filter with single adaptive factor based on the discrepancy of the predicted position or the predicted velocity.

  20. Dual Butterfly Match Filter VLSI Design

    Institute of Scientific and Technical Information of China (English)

    LIU Zhenyu; HAN Yueqiu

    2001-01-01

    Match filter is widely used in realtime signal processing, especially in Radar Signal Processing. This paper provides a novel ASIC design,which not only saves resource, but also improves thethroughput of the system. This ASIC is specially designed for Radar Pulse Compression. Certainly it canalso be used in other circumstances, such as FIR filter.

  1. The Filtering Effect of Sharing Rules

    NARCIS (Netherlands)

    Dari Mattiacci, G.; de Geest, G.G.A.

    2004-01-01

    Sharing rules have a filtering effect on violations: they prevent the most harmful violations and let the least harmful ones occur. We show under what conditions the filtering effect improves social welfare and argue that this may explain why, in most areas of the law, sharing rules are, in general,

  2. Ring-resonator-based wavelength filters

    NARCIS (Netherlands)

    Geuzebroek, D.H.; Driessen, A.; Venghaus, H.

    2006-01-01

    Microring resonators (MR) represent a class of filters with characteristics very similar to those of Fabry–Perot filters. However, they offer the advantage that the injected and reflected signals are separated in individual waveguides, and in addition, their design does not require any facets or

  3. CCII based fractional filters of different orders

    Directory of Open Access Journals (Sweden)

    Ahmed Soltan

    2014-03-01

    Full Text Available This paper aims to generalize the design of continuous-time filters to the fractional domain with different orders and validates the theoretical results with two different CCII based filters. In particular, the proposed study introduces the generalized formulas for the previous fractional-order analysis of equal orders. The fractional-order filters enhance the design flexibility and prove that the integer-order performance is a very narrow subset from the fractional-order behavior due to the extra degrees of freedom. The general fundamentals of these filters are presented by calculating the maximum and minimum frequencies, the half power frequency and the right phase frequency which are considered a critical issue for the filter design. Different numerical solutions for the generalized fractional order low pass filters with two different fractional order elements are introduced and verified by the circuit simulations of two fractional-order filters: Kerwin–Huelsman–Newcomb (KHN and Tow-Tomas CCII-based filters, showing great matching.

  4. Microorganisms interacting in a bio filter

    Energy Technology Data Exchange (ETDEWEB)

    Barba-Avila, M. D.; Flores-Tene, F. J.; Moreno-Terrazas, R.; Ramirez-Lopez, E. M.

    2009-07-01

    Biofilm microorganisms developed on a bio filter support media allow the metabolism of volatile organic compounds (VOCs) to carbon dioxide and water. VOCs are present in polluted gaseous streams for varied industrial activities. The main objective of this study was to identify the microorganisms present in the biofilm developed on a bio filter support media using molecular biology techniques. (Author)

  5. Compact microstrip bandpass filter with tunable notch

    DEFF Research Database (Denmark)

    Christensen, Silas; Zhurbenko, Vitaliy; Johansen, Tom Keinicke

    2014-01-01

    Two different designs combining a bandpass and a notch filter are developed to operate in the receiving band from 350–470 MHz. The bandpass filter is designed from a simple structure, by use of only four short circuited stubs and a half wavelength transmission line connecting the stubs. The tunable...

  6. Deterministic Kalman filtering in a behavioral framework

    NARCIS (Netherlands)

    Fagnani, F; Willems, JC

    1997-01-01

    The purpose of this paper is to obtain a deterministic version of the Kalman filtering equations. We will use a behavioral description of the plant, specifically, an image representation. The resulting algorithm requires a matrix spectral factorization. We also show that the filter can be implemente

  7. Sensory source strength of used ventilation filters

    DEFF Research Database (Denmark)

    Clausen, Geo; Alm, Ole Martin; Fanger, Povl Ole

    2002-01-01

    A two-year-old filter was placed in a ventilation system recirculating the air in an experimental space. Via glass tubes supplied with a small fan it was possible to extract air upstream and downstream of the filter to an adjacent room. A panel could thus perform sensory assessments of the air from...

  8. Oracle Wiener filtering of a Gaussian signal

    NARCIS (Netherlands)

    Babenko, A.; Belitser, E.N.

    2011-01-01

    We study the problem of filtering a Gaussian process whose trajectories, in some sense, have an unknown smoothness β0 from the white noise of small intensity . If we knew the parameter β0, we would use the Wiener filter which has the meaning of oracle. Our goal is now to mimic the oracle, i.e., cons

  9. Ultrasound speckle reduction using modified Gabor filters.

    Science.gov (United States)

    Dantas, Ricardo G; Costa, Eduardo T

    2007-03-01

    B-mode ultrasound images are characterized by speckle artifact, which may make the interpretation of images difficult. One widely used method for ultrasound speckle reduction is the split spectrum processing (SSP), but the use of one-dimensional (1-D), narrow-band filters makes the resultant image experience a significant resolution loss. In order to overcome this critical drawback, we propose a novel method for speckle reduction in ultrasound medical imaging, which uses a bank of wideband 2-D directive filters, based on modified Gabor functions. Each filter is applied to the 2-D radio-frequency (RF) data, resulting in a B-mode image filtered in a given direction. The compounding of the filters outputs give rise to a final image in which speckle is reduced and the structure is enhanced. We have denoted this method as directive filtering (DF). Because the proposed filters have effectively the same bandwidth as the original image, it is possible to avoid the resolution loss caused by the use of narrow-band filters, as with SSP. The tests were carried out with both simulated and real clinical data. Using the signal-to-noise ratio (SNR) to quantify the amount of speckle of the ultrasound images, we have achieved an average SNR enhancement of 2.26 times with simulated data and 1.18 times with real clinical data.

  10. Wiener Filter Estimation of Transfer Functions

    Science.gov (United States)

    Kessel, Robert

    2004-01-01

    The use of a Wiener filter estimate for the linear transfer function can significantly improve the description of behavioral dynamics. This report presents a two-pass, Monte-Carlo-based algorithm that is well suited to repeated-trials local average measurements. The Wiener filter transfer functions strongly suppress noise artifacts as well as…

  11. Analysis of ECG Using Filter Bank Approach

    Directory of Open Access Journals (Sweden)

    S. Thulasi Prasad

    2014-01-01

    Full Text Available In recent years scientists and engineers are facing several problems in the biomedical field. However Digital Signal Processing is solving many of those problems easily and effectively. The signal processing of ECG is very useful in detecting selected arrhythmia conditions from a patient’s electrocardiograph (ECG signals. In this paper we performed analysis of noisy ECG by filtering of 50 Hz power line interference using an adaptive LMS notch filter. This is very meaningful in the measurement of biomedical events, particularly when the recorded ECG signal is very weak. The basic ECG has the frequency range from 5 Hz to 100 Hz. It becomes difficult for the Specialist to diagnose the diseases if the artifacts are present in the ECG signal. Methods of noise reduction have decisive influence on performance of all electro-cardio-graphic (ECG signal processing systems. After removing 50/60 Hz powerline interference, the ECG is lowpass filtered in a digital FIR filter. We designed a Filter Bank to separate frequency ranges of ECG signal to enhance the occurrences QRS complexes. Later the positions of R-peaks are identified and shown plotted. The result shows the ECG signal before filtering and after filtering with their frequency spectrums which clearly indicates the reduction of the power line interference in the ECG signal and a filtered ECG with identified R-peaks.

  12. Active imaging system with Faraday filter

    Science.gov (United States)

    Snyder, James J.

    1993-01-01

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  13. Filtering Meteoroid Flights Using Multiple Unscented Kalman Filters

    Science.gov (United States)

    Sansom, E. K.; Bland, P. A.; Rutten, M. G.; Paxman, J.; Towner, M. C.

    2016-11-01

    Estimator algorithms are immensely versatile and powerful tools that can be applied to any problem where a dynamic system can be modeled by a set of equations and where observations are available. A well designed estimator enables system states to be optimally predicted and errors to be rigorously quantified. Unscented Kalman filters (UKFs) and interactive multiple models can be found in methods from satellite tracking to self-driving cars. The luminous trajectory of the Bunburra Rockhole fireball was observed by the Desert Fireball Network in mid-2007. The recorded data set is used in this paper to examine the application of these two techniques as a viable approach to characterizing fireball dynamics. The nonlinear, single-body system of equations, used to model meteoroid entry through the atmosphere, is challenged by gross fragmentation events that may occur. The incorporation of the UKF within an interactive multiple model smoother provides a likely solution for when fragmentation events may occur as well as providing a statistical analysis of the state uncertainties. In addition to these benefits, another advantage of this approach is its automatability for use within an image processing pipeline to facilitate large fireball data analyses and meteorite recoveries.

  14. RAPID TRANSFER ALIGNMENT USING FEDERATED KALMAN FILTER

    Institute of Scientific and Technical Information of China (English)

    GUDong-qing; QINYong-yuan; PENGRong; LIXin

    2005-01-01

    The dimension number of the centralized Kalman filter (CKF) for the rapid transfer alignment (TA) is as high as 21 if the aircraft wing flexure motion is considered in the rapid TA. The 21-dimensional CKF brings the calculation burden on the computer and the difficulty to meet a high filtering updating rate desired by rapid TA. The federated Kalman filter (FKF) for the rapid TA is proposed to solve the dilemma. The structure and the algorithm of the FKF, which can perform parallel computation and has less calculation burden, are designed.The wing flexure motion is modeled, and then the 12-order velocity matching local filter and the 15-order attitud ematching local filter are devised. Simulation results show that the proposed EKE for the rapid TA almost has the same performance as the CKF. Thus the calculation burden of the proposed FKF for the rapid TA is markedly decreased.

  15. Thermovoltaic semiconductor device including a plasma filter

    Science.gov (United States)

    Baldasaro, Paul F.

    1999-01-01

    A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

  16. Field of Particle Filters Image Inpainting

    DEFF Research Database (Denmark)

    Cuzol, Anne; Pedersen, Kim Steenstrup; Nielsen, Mads

    2008-01-01

    We present a novel algorithm for solving the image inpainting problem based on a field of locally interacting particle filters. Image inpainting, also known as image completion, is concerned with the problem of filling image regions with new visually plausible data. In order to avoid the difficulty...... of solving the problem globally for the region to be inpainted, we introduce a field of local particle filters. The states of the particle filters are image patches. Global consistency is enforced by a Markov random field image model which connects neighbouring particle filters. The benefit of using locally...... interacting particle filters is that several competing hypotheses on inpainting solutions are kept active, allowing the method to provide globally consistent solutions on problems where other local methods may fail. We provide examples of applications of the developed method. Keywords: Inpainting · Image...

  17. Transmission properties of cryogenic twisted pair filters

    Energy Technology Data Exchange (ETDEWEB)

    Song, Woon; Rehman, Mushtaq; Chong, Yonuk [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Ryu, Sangwan [Chonnam National University, Gwangju (Korea, Republic of)

    2010-12-15

    We fabricated a cryogenic low pass filter that consists of twisted pairs of manganin wires wrapped in copper tape and measured its transmission characteristics at frequencies up to 18 GHz. The dependence of the microwave transmission characteristics on the filter length was studied, which showed that a filter of length 1.0 m had a 70-dB attenuation at 1 GHz. We also studied the dependence of common- and differential-mode transmission on the number of twists per unit length and found that the number of twists per unit length affects differential-mode transmission but not common-mode transmission. Because the shielded twisted pair filter is more compact than a conventional copper powder filter, it can solve the space and thermal load issues when many cables are required for precision electronic transport experiments at low temperatures.

  18. Nanoparticles filtration by leaked fibrous filters

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, Guillaume; Calle-Chazelet, Sandrine; Thomas, Dominique; Appert-Collin, Jean-Christophe [Nancy-Universite/LSGC/CNRS - 1 rue Grandville - BP 20451 - F-54001 Nancy Cedex (France)], E-mail: sandrine.calle@ensic.inpl-nancy.fr; Bemer, Denis [INRS - Avenue de Bourgogne - F-54501 Vandoeuvre les Nancy Cedex (France)

    2009-05-01

    The aim of this work is first to measured nanoparticles penetration through three different fiberglass filters intentionally-pierced with calibrated needles at different filtration velocity. Then a semi-empirical model based on the air flow resistances of the new and perforated filter media and on the mechanism of Brownian diffusion for the collection of ultrafine particles by the media enables to well predict the efficiency observed for all tested operating conditions. Results show that the increase of particles penetration is all the more important that the pinhole is large and that the particle diameter is low. Another result is that the filtration efficiency of the new filter media controlled the penetration. A high efficiency filter with a high resistance to air flow will be more damaged than a low efficiency filter when being perforated.

  19. Design of New SAW DQPSK Matched Filter

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new surface acoustic wave differential quadraphase shift key(SAW DQPSK) spread spectrum(SS) signal matched filter based on the fusion of SS and differential modulation is reported. The design of multi-phase coded SAW matched filter is proposed rather than another design of SAW DQPSK filter, which can cut in a half of the delay time of SAW DQPSK matched filter and SAW fixed delay line(FDL) used for differential demodulation. This breakthrough is made the system largely reduce a size and process much easily. This method can also be feasible in other SAW MPSK matched filter design especially when the modulation phase number is larger than 4. The design example and its experimental results are given.

  20. Particle filters for random set models

    CERN Document Server

    Ristic, Branko

    2013-01-01

    “Particle Filters for Random Set Models” presents coverage of state estimation of stochastic dynamic systems from noisy measurements, specifically sequential Bayesian estimation and nonlinear or stochastic filtering. The class of solutions presented in this book is based  on the Monte Carlo statistical method. The resulting  algorithms, known as particle filters, in the last decade have become one of the essential tools for stochastic filtering, with applications ranging from  navigation and autonomous vehicles to bio-informatics and finance. While particle filters have been around for more than a decade, the recent theoretical developments of sequential Bayesian estimation in the framework of random set theory have provided new opportunities which are not widely known and are covered in this book. These recent developments have dramatically widened the scope of applications, from single to multiple appearing/disappearing objects, from precise to imprecise measurements and measurement models. This book...

  1. Directional Filters for Cartoon + Texture Image Decomposition

    Directory of Open Access Journals (Sweden)

    Antoni Buades

    2016-05-01

    Full Text Available We present in this article a detailed analysis and implementation of the cartoon+texture decomposition algorithm proposed in [A. Buades, J.L. Lisani, 'Directional filters for color cartoon + texture image and video decomposition', Journal of Mathematical Imaging and Vision, 2015]. This method follows the approach proposed by [A. Buades, T. Le, J-M. Morel, L. Vese, 'Cartoon+Texture Image Decomposition', IPOL 2011], based on low/high-pass filtering, but replaces the isotropic filters by a bank of low-pass directional filters. The cartoon image is obtained by filtering in the direction that leads to the largest local total variation rate reduction. This permits to improve the performance of the decomposition near image discontinuities, where an halo effect was produced by the previous method.

  2. Correlation and Sequential Filtering with Doppler Measurements

    Institute of Scientific and Technical Information of China (English)

    WANGJianguo; HEPeikun; HANYueqiu; WUSiliang

    2004-01-01

    Two sequential filters are developed for Doppler radar measurements in the presence of correlation between range and range rate measurement errors. Two ideal linear measurement equations with the pseudo measurements are constructed via block-partitioned Cholesky factorization and the practical measurement equationswith the pseudo measurements are obtained through the direction cosine estimation and error compensation. The resulting sequential filters make the position measurement be possibly processed before the pseudo measurement and hence the more accurate direction cosine estimate can be obtained from the filtered position estimate rather than the predicted state estimate. The numerical simulations with different rangerange rate correlation coefficients show thatthe proposed two sequential filters are almost equivalent in performance but both superior to the conventional extended Kalman filter for different correlation coefficients.

  3. Nonlinear filtering for LIDAR signal processing

    Directory of Open Access Journals (Sweden)

    D. G. Lainiotis

    1996-01-01

    Full Text Available LIDAR (Laser Integrated Radar is an engineering problem of great practical importance in environmental monitoring sciences. Signal processing for LIDAR applications involves highly nonlinear models and consequently nonlinear filtering. Optimal nonlinear filters, however, are practically unrealizable. In this paper, the Lainiotis's multi-model partitioning methodology and the related approximate but effective nonlinear filtering algorithms are reviewed and applied to LIDAR signal processing. Extensive simulation and performance evaluation of the multi-model partitioning approach and its application to LIDAR signal processing shows that the nonlinear partitioning methods are very effective and significantly superior to the nonlinear extended Kalman filter (EKF, which has been the standard nonlinear filter in past engineering applications.

  4. Image Filtering Based on Improved Information Entropy

    Institute of Scientific and Technical Information of China (English)

    JINGXiaojun; LIUYulin; XIONGYuqing

    2004-01-01

    An image filtering based on improved information entropy is proposed in this paper, which can overcome the shortcomings of hybrid linear and non-linear filtering algorithm. Due to the shortcomings of information entropy in the field of data fusion, we introduce the consistency constraint factor of sub-source report and subsource performance difference parameter, propose the concept of fusion entropy, utilize its amendment and regularity function on sub-source decision-making matrix, bring into play the competency, redundency and complementarity of information fusion, suppress and delete fault and invalid information, strengthen and preserve correct and useful information, overcome the risk of error reporting on single source critical point and the shortcomings of reliability and error tolerating, add the decision-making criteria of multiple sub-source fusion, finally improve filtering quality. Subsequent experiments show its validity and improved filtering performance, thus providing a new way of image filtering technique.

  5. Adaptive Filtering Algorithms and Practical Implementation

    CERN Document Server

    Diniz, Paulo S R

    2013-01-01

    In the fourth edition of Adaptive Filtering: Algorithms and Practical Implementation, author Paulo S.R. Diniz presents the basic concepts of adaptive signal processing and adaptive filtering in a concise and straightforward manner. The main classes of adaptive filtering algorithms are presented in a unified framework, using clear notations that facilitate actual implementation. The main algorithms are described in tables, which are detailed enough to allow the reader to verify the covered concepts. Many examples address problems drawn from actual applications. New material to this edition includes: Analytical and simulation examples in Chapters 4, 5, 6 and 10 Appendix E, which summarizes the analysis of set-membership algorithm Updated problems and references Providing a concise background on adaptive filtering, this book covers the family of LMS, affine projection, RLS and data-selective set-membership algorithms as well as nonlinear, sub-band, blind, IIR adaptive filtering, and more. Several problems are...

  6. Optimal Filtering of Malicious IP Sources

    CERN Document Server

    Soldo, Fabio; Argyraki, Katerina

    2008-01-01

    How can we protect the network infrastructure from malicious traffic, such as scanning, malicious code propagation, and distributed denial-of-service (DDoS) attacks? One mechanism for blocking malicious traffic is filtering: access control lists (ACLs) can selectively block traffic based on fields of the IP header. Filters (ACLs) are already available in the routers today but are a scarce resource because they are stored in the expensive ternary content addressable memory (TCAM). In this paper, we develop, for the first time, a framework for studying filter selection as a resource allocation problem. Within this framework, we study five practical cases of source address/prefix filtering, which correspond to different attack scenarios and operator's policies. We show that filter selection optimization leads to novel variations of the multidimensional knapsack problem and we design optimal, yet computationally efficient, algorithms to solve them. We also evaluate our approach using data from Dshield.org and dem...

  7. Actively Pumped Optical Filters at 532 nm

    Science.gov (United States)

    Billmers, Richard I.; Gayen, S. K.; Contarino, Vincent M.; Scharpf, William J.; Squicciarini, Martin F.; Allocca, David A.

    1995-01-01

    The operation of two narrow-band optical filters at 532.33 nm is presented. Both of these filters operate on the 4P(sub 1/2) to 8S(sub 1/2) excited-state transition in potassium vapor. One of the filters is based on excited-state Faraday effect, and requires the application of an external axial magnetic field. The peak transmission of this filter is approximately 3.5% with a linewidth of less than 10 GHz. The second filter does not require a magnetic field for its operation, but readily attains peak transmissions of 25-30%. The 4P(sub 1/2) state is excited by a 769.9 nm light pulse which is linearly polarized for the first scheme and circularly polarized for the second.

  8. Particle Filtering on the Audio Localization Manifold

    CERN Document Server

    Ettinger, Evan

    2010-01-01

    We present a novel particle filtering algorithm for tracking a moving sound source using a microphone array. If there are N microphones in the array, we track all $N \\choose 2$ delays with a single particle filter over time. Since it is known that tracking in high dimensions is rife with difficulties, we instead integrate into our particle filter a model of the low dimensional manifold that these delays lie on. Our manifold model is based off of work on modeling low dimensional manifolds via random projection trees [1]. In addition, we also introduce a new weighting scheme to our particle filtering algorithm based on recent advancements in online learning. We show that our novel TDOA tracking algorithm that integrates a manifold model can greatly outperform standard particle filters on this audio tracking task.

  9. Hydrodynamics of Microbial Filter-Feeding

    Science.gov (United States)

    Andersen, Anders; Nielsen, Lasse Tor; Dolger, Julia; Kiorboe, Thomas

    2016-11-01

    Microbial filter-feeders form an important group of plankton with significance to the aquatic food webs. While the concept of filter-feeding is straightforward, our quantitative understanding of microbial filter-feeding leaves a lot to be desired. As a model organism, we focus on the filter-feeding choanoflagellate Diaphanoeca grandis. We quantify the feeding flow using particle tracking, and demonstrate that hydrodynamic theory underestimates the observed clearance rate by an order of magnitude. We find similar discrepancies for other choanoflagellate species, highlighting an apparent paradox. To resolve the paradox we argue that D. grandis and other choanoflagellates must have so far unbeknownst morphological features. Specifically, we suggest a flagellar vane that connects the flagellum to the filter, as known in choanocytes of sponges, creating a radically different, and order of magnitude more capable, pumping mechanism. The Centre for Ocean Life is a VKR Centre of Excellence supported by the Villum Foundation.

  10. Kalman filtering theory and practice with MATLAB

    CERN Document Server

    Grewal, M

    2015-01-01

    The definitive textbook and professional reference on Kalman Filtering fully updated, revised, and expanded This book contains the latest developments in the implementation and application of Kalman filtering. Authors Grewal and Andrews draw upon their decades of experience to offer an in-depth examination of the subtleties, common pitfalls, and limitations of estimation theory as it applies to real-world situations. They present many illustrative examples including adaptations for nonlinear filtering, global navigation satellite systems, the error modeling of gyros and accelerometers, inertial navigation systems, and freeway traffic control. Kalman Filtering: Theory and Practice Using MATLAB, Fourth Edition is an ideal textbook in advanced undergraduate and beginning graduate courses in stochastic processes and Kalman filtering. It is also appropriate for self-instruction or review by practicing engineers and scientists who want to learn more about this important topic.

  11. Passive target tracking using marginalized particle filter

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A marginalized particle filtering(MPF)approach is proposed for target tracking under the background of passive measurement.Essentially,the MPF is a combination of particle filtering technique and Kalman filter.By making full use of marginalization,the distributions of the tractable linear part of the total state variables are updated analytically using Kalman filter,and only the lower-dimensional nonlinear state variable needs to be dealt with using particle filter.Simulation studies are performed on an illustrative example,and the results show that the MPF method leads to a significant reduction of the tracking errors when compared with the direct particle implementation.Real data test results also validate the effectiveness of the presented method.

  12. Image Filtering Driven by Level Curves

    Science.gov (United States)

    Rajwade, Ajit; Banerjee, Arunava; Rangarajan, Anand

    This paper presents an approach to image filtering that is driven by the properties of the iso-valued level curves of the image and their relationship with one another. We explore the relationship of our algorithm to existing probabilistically driven filtering methods such as those based on kernel density estimation, local-mode finding and mean-shift. Extensive experimental results on filtering gray-scale images, color images, gray-scale video and chromaticity fields are presented. In contrast to existing probabilistic methods, in our approach, the selection of the parameter that prevents diffusion across the edge is robustly decoupled from the smoothing of the density itself. Furthermore, our method is observed to produce better filtering results for the same settings of parameters for the filter window size and the edge definition.

  13. Ammonia transformation in a biotrickling air filter

    DEFF Research Database (Denmark)

    Nielsen, Lars Peter; Nielsen, Marie Louise; Andersen, Mathias

    2007-01-01

    A simple, tubular biotrickling filter was designed for optimal removal of ammonia and odour in ventilation air from a pig house. The removal and transformation of ammonia was studied in detail by analysis and modelling of chemical gradients through the filter. Good correspondence between...... measurements and model was obtained by using conventional substrate and inhibition kinetics of ammonium and nitrite oxidizing bacteria. Highest rates of ammonia removal were observed in the central section of the filter. Near the air outlet and water inlet the process was ammonia limited, while high nitrous...... acid concentrations almost excluded any biological activity near the air inlet and water outlet. Nitrous acid inhibition also stabilized pH at 6.5-7 all through the filter. Being sensitive to both ammonia and nitrous acid the nitrite oxidation process occurred mainly in the filter sections near the air...

  14. Filters, reproducing kernel, and adaptive meshfree method

    Science.gov (United States)

    You, Y.; Chen, J.-S.; Lu, H.

    Reproducing kernel, with its intrinsic feature of moving averaging, can be utilized as a low-pass filter with scale decomposition capability. The discrete convolution of two nth order reproducing kernels with arbitrary support size in each kernel results in a filtered reproducing kernel function that has the same reproducing order. This property is utilized to separate the numerical solution into an unfiltered lower order portion and a filtered higher order portion. As such, the corresponding high-pass filter of this reproducing kernel filter can be used to identify the locations of high gradient, and consequently serves as an operator for error indication in meshfree analysis. In conjunction with the naturally conforming property of the reproducing kernel approximation, a meshfree adaptivity method is also proposed.

  15. Design and control of LCL-filter with active damping for Active Power Filter

    DEFF Research Database (Denmark)

    Zeng, Guohong; Rasmussen, Tonny Wederberg; Ma, L

    2010-01-01

    In the application of shunt Active Power Filter (APF) to compensate nonlinear load's harmonic, reactive and negative sequence current, it is more effective to use a LCL-filter than an L-filter as an interface between the Voltage Source Converter (VSC) and grid. In this paper, a designing procedure...... of LCL-filter for APF is introduced, which is aimed for simplified the implementation. To suppress the resonance that may be excited in the system, which brings in stability problems, an active damping control strategy using the current feed-back of the filter capacitor is adopted. By selecting two equal...

  16. Increasing parvovirus filter throughput of monoclonal antibodies using ion exchange membrane adsorptive pre-filtration.

    Science.gov (United States)

    Brown, Arick; Bechtel, Charity; Bill, Jerome; Liu, Hui; Liu, Jun; McDonald, Dan; Pai, Satyan; Radhamohan, Asha; Renslow, Ryan; Thayer, Brooke; Yohe, Stefan; Dowd, Chris

    2010-07-01

    Pre-filtration using ion exchange membrane adsorbers can improve parvovirus filter throughput of monoclonal antibodies (mAbs). The membranes work by binding trace foulants, and although some antibody product also binds, yields > or =99% are easily achieved by overloading. Results show that foulant adsorption is dependent on pH and conductivity, but independent of scale and adsorber brand. The ability to use ion exchange membranes as pre-filters is significant because it provides a clean, well defined, chemically stable option for enhancing throughput. Additionally, ion exchange membranes facilitate characterization of parvovirus filter foulants. Examination of adsorber elution samples using sedimentation velocity analysis and SEC-MALS/QELS revealed the presence of high molecular weight species ranging from 8 to 13 nm in hydrodynamic radius, which are similar in size to parvoviruses and thus would be expected to plug the pores of a parvovirus filter. A study of two identical membranes in-series supports the hypothesis that the foulants are soluble, trace level aggregates in the feed. This study's significance lies in a previously undiscovered application of membrane chromatography, leading to a more cost effective and robust approach to parvovirus filtration for the production of monoclonal antibodies.

  17. Dynamics of the EAG1 K(+) channel selectivity filter assessed by molecular dynamics simulations.

    Science.gov (United States)

    Bernsteiner, Harald; Bründl, Michael; Stary-Weinzinger, Anna

    2017-02-26

    EAG1 channels belong to the KCNH family of voltage gated potassium channels. They are expressed in several brain regions and increased expression is linked to certain cancer types. Recent cryo-EM structure determination finally revealed the structure of these channels in atomic detail, allowing computational investigations. In this study, we performed molecular dynamics simulations to investigate the ion binding sites and the dynamical behavior of the selectivity filter. Our simulations suggest that sites S2 and S4 form stable ion binding sites, while ions placed at sites S1 and S3 rapidly switched to sites S2 and S4. Further, ions tended to dissociate away from S0 within less than 20 ns, due to increased filter flexibility. This was followed by water influx from the extracellular side, leading to a widening of the filter in this region, and likely non-conductive filter configurations. Simulations with the inactivation-enhancing mutant Y464A or Na(+) ions lead to trapped water molecules behind the SF, suggesting that these simulations captured early conformational changes linked to C-type inactivation.

  18. A critical evaluation of Amicon Ultra centrifugal filters for separating proteins, drugs and nanoparticles in biosamples.

    Science.gov (United States)

    Johnsen, Elin; Brandtzaeg, Ole Kristian; Vehus, Tore; Roberg-Larsen, Hanne; Bogoeva, Vanya; Ademi, Ornela; Hildahl, Jon; Lundanes, Elsa; Wilson, Steven Ray

    2016-02-20

    Amicon(®) Ultra centrifugal filters were critically evaluated for various sample preparations, namely (a) proteome fractionation, (b) sample cleanup prior to liquid chromatography mass spectrometry (LC-MS) measurement of small molecules in cell lysate, and (c) separating drug-loaded nanoparticles and released drugs for accurate release profiling in biological samples. (a) Filters of supposedly differing molar mass (MM) selectivity (10, 30, 50 and 100K) were combined to attempt fractionation of samples of various complexity and concentration. However, the products had surprisingly similar MM retentate/filtrate profiles, and the filters were unsuited for proteome fractionation. (b) Centrifugal filtration was the only clean-up procedure in a FDA-guideline validated LC-MS method for determining anti-tuberculosis agents rifampicin and thioridazine in macrophage cell lysate. An additional organic solvent washing step (drug/protein-binding disruption) was required for satisfactory recovery. (c) The centrifugation filters are well suited for separating drugs and nanoparticles in simple aqueous solutions, but significantly less so for biological samples, as common drug-protein binding disruptors can dissolve NPs or be incompatible with LC-MS instrumentation.

  19. Microwave-Regenerated Diesel Exhaust Particulate Filter

    Energy Technology Data Exchange (ETDEWEB)

    Nixdorf, Richard D. (Industrial Ceramic Solution, LLC); Green, Johney Boyd; Story, John M.; Wagner, Robert M. (Oak Ridge National Laboratory)

    2001-03-05

    Development of a microwave-regenerated particulate filter system has evolved from bench scale work to actual diesel engine experimentation. The filter system was initially evaluated on a stationary mounted 1.2-L diesel engine and was able to remove a significant amount of carbon particles from the exhaust. The ability of the microwave energy to regenerate or clean the filter was also demonstrated on this engine under idle conditions. Based on the 1.2-L experiments, improvements to the filter design and materials were implemented and the system was re-evaluated on a vehicle equipped with a 7.3-L diesel engine. The 7.3-L engine was selected to achieve heavy filter loading in a relatively short period of time. The purpose of these experiments was to evaluate filter-loading capacity, power requirements for regeneration, and filter regeneration efficiency. A more detailed evaluation of the filter was performed on a stationary mounted 1.9-L diesel engine. The effect of exhaust flow rate, loading, transients, and regeneration on filter efficiency was evaluated with this setup. In addition, gaseous exhaust emissions were investigated with and without an oxidation catalyst on the filter cartridge during loading and regeneration. (SAE Paper SAE-2001-01-0903 © 2001 SAE International. This paper is published on this website with permission from SAE International. As a user of this website, you are permitted to view this paper on-line, download this pdf file and print one copy of this paper at no cost for your use only. The downloaded pdf file and printout of this SAE paper may not be copied, distributed or forwarded to others or for the use of others.)

  20. Optimal filter bandwidth for pulse oximetry

    Science.gov (United States)

    Stuban, Norbert; Niwayama, Masatsugu

    2012-10-01

    Pulse oximeters contain one or more signal filtering stages between the photodiode and microcontroller. These filters are responsible for removing the noise while retaining the useful frequency components of the signal, thus improving the signal-to-noise ratio. The corner frequencies of these filters affect not only the noise level, but also the shape of the pulse signal. Narrow filter bandwidth effectively suppresses the noise; however, at the same time, it distorts the useful signal components by decreasing the harmonic content. In this paper, we investigated the influence of the filter bandwidth on the accuracy of pulse oximeters. We used a pulse oximeter tester device to produce stable, repetitive pulse waves with digitally adjustable R ratio and heart rate. We built a pulse oximeter and attached it to the tester device. The pulse oximeter digitized the current of its photodiode directly, without any analog signal conditioning. We varied the corner frequency of the low-pass filter in the pulse oximeter in the range of 0.66-15 Hz by software. For the tester device, the R ratio was set to R = 1.00, and the R ratio deviation measured by the pulse oximeter was monitored as a function of the corner frequency of the low-pass filter. The results revealed that lowering the corner frequency of the low-pass filter did not decrease the accuracy of the oxygen level measurements. The lowest possible value of the corner frequency of the low-pass filter is the fundamental frequency of the pulse signal. We concluded that the harmonics of the pulse signal do not contribute to the accuracy of pulse oximetry. The results achieved by the pulse oximeter tester were verified by human experiments, performed on five healthy subjects. The results of the human measurements confirmed that filtering out the harmonics of the pulse signal does not degrade the accuracy of pulse oximetry.

  1. Precise dispersion equations of absorbing filter glasses

    Science.gov (United States)

    Reichel, S.; Biertümpfel, Ralf

    2014-05-01

    The refractive indices versus wavelength of optical transparent glasses are measured at a few wavelengths only. In order to calculate the refractive index at any wavelength, a so-called Sellmeier series is used as an approximation of the wavelength dependent refractive index. Such a Sellmeier representation assumes an absorbing free (= loss less) material. In optical transparent glasses this assumption is valid since the absorption of such transparent glasses is very low. However, optical filter glasses have often a rather high absorbance in certain regions of the spectrum. The exact description of the wavelength dependent function of the refractive index is essential for an optimized design for sophisticated optical applications. Digital cameras use an IR cut filter to ensure good color rendition and image quality. In order to reduce ghost images by reflections and to be nearly angle independent absorbing filter glass is used, e.g. blue glass BG60 from SCHOTT. Nowadays digital cameras improve their performance and so the IR cut filter needs to be improved and thus the accurate knowledge of the refractive index (dispersion) of the used glasses must be known. But absorbing filter glass is not loss less as needed for a Sellmeier representation. In addition it is very difficult to measure it in the absorption region of the filter glass. We have focused a lot of effort on measuring the refractive index at specific wavelength for absorbing filter glass - even in the absorption region. It will be described how to do such a measurement. In addition we estimate the use of a Sellmeier representation for filter glasses. It turns out that in most cases a Sellmeier representation can be used even for absorbing filter glasses. Finally Sellmeier coefficients for the approximation of the refractive index will be given for different filter glasses.

  2. Filter based phase distortions in extracellular spikes.

    Science.gov (United States)

    Yael, Dorin; Bar-Gad, Izhar

    2017-01-01

    Extracellular recordings are the primary tool for extracting neuronal spike trains in-vivo. One of the crucial pre-processing stages of this signal is the high-pass filtration used to isolate neuronal spiking activity. Filters are characterized by changes in the magnitude and phase of different frequencies. While filters are typically chosen for their effect on magnitudes, little attention has been paid to the impact of these filters on the phase of each frequency. In this study we show that in the case of nonlinear phase shifts generated by most online and offline filters, the signal is severely distorted, resulting in an alteration of the spike waveform. This distortion leads to a shape that deviates from the original waveform as a function of its constituent frequencies, and a dramatic reduction in the SNR of the waveform that disrupts spike detectability. Currently, the vast majority of articles utilizing extracellular data are subject to these distortions since most commercial and academic hardware and software utilize nonlinear phase filters. We show that this severe problem can be avoided by recording wide-band signals followed by zero phase filtering, or alternatively corrected by reversed filtering of a narrow-band filtered, and in some cases even segmented signals. Implementation of either zero phase filtering or phase correction of the nonlinear phase filtering reproduces the original spike waveforms and increases the spike detection rates while reducing the number of false negative and positive errors. This process, in turn, helps eliminate subsequent errors in downstream analyses and misinterpretations of the results.

  3. UV filters for lighting of plants

    Science.gov (United States)

    Doehring, T.; Koefferlein, M.; Thiel, S.; Seidlitz, H. K.; Payer, H. D.

    1994-03-01

    The wavelength dependent interaction of biological systems with radiation is commonly described by appropriate action spectra. Particularly effective plant responses are obtained for ultraviolet (UV) radiation. Excess shortwave UV-B radiation will induce genetic defects and plant damage. Besides the ecological discussion of the deleterious effects of the excess UV radiation there is increasing interest in horticultural applications of this spectral region. Several metabolic pathways leading to valuable secondary plant products like colors, odors, taste, or resulting in mechanical strength and vitality are triggered by UV radiation. Thus, in ecologically as well as in economically oriented experiments the exact generation and knowledge of the spectral irradiance, particularly near the UV absorption edge, is essential. The ideal filter 'material' to control the UV absorption edge would be ozone itself. However, due to problems in controlling the toxic and chemically aggressive, instable gas, only rather 'small ozone filters' have been realized so far. In artificial plant lighting conventional solid filter materials such as glass sheets and plastic foils (celluloseacetate or cellulosetriacetate) which can be easily handled have been used to absorb the UV-C and the excess shortwave UV-B radiation of the lamp emissions. Different filter glasses are available which provide absorption properties suitable for gradual changes of the spectral UV-B illumination of artificial lighting. Using a distinct set of lamps and filter glasses an acceptable simulation of the UV-B part of natural global radiation can be achieved. The aging of these and other filter materials under the extreme UV radiation in the lamphouse of a solar simulator is presently unavoidable. This instability can be dealt with only by a precise spectral monitoring and by replacing the filters accordingly. For this reason attempts would be useful to develop real ozone filters which can replace glass filters. In

  4. Filter based phase distortions in extracellular spikes

    Science.gov (United States)

    Yael, Dorin

    2017-01-01

    Extracellular recordings are the primary tool for extracting neuronal spike trains in-vivo. One of the crucial pre-processing stages of this signal is the high-pass filtration used to isolate neuronal spiking activity. Filters are characterized by changes in the magnitude and phase of different frequencies. While filters are typically chosen for their effect on magnitudes, little attention has been paid to the impact of these filters on the phase of each frequency. In this study we show that in the case of nonlinear phase shifts generated by most online and offline filters, the signal is severely distorted, resulting in an alteration of the spike waveform. This distortion leads to a shape that deviates from the original waveform as a function of its constituent frequencies, and a dramatic reduction in the SNR of the waveform that disrupts spike detectability. Currently, the vast majority of articles utilizing extracellular data are subject to these distortions since most commercial and academic hardware and software utilize nonlinear phase filters. We show that this severe problem can be avoided by recording wide-band signals followed by zero phase filtering, or alternatively corrected by reversed filtering of a narrow-band filtered, and in some cases even segmented signals. Implementation of either zero phase filtering or phase correction of the nonlinear phase filtering reproduces the original spike waveforms and increases the spike detection rates while reducing the number of false negative and positive errors. This process, in turn, helps eliminate subsequent errors in downstream analyses and misinterpretations of the results. PMID:28358895

  5. Potential for HEPA filter damage from water spray systems in filter plenums

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W. [Lawrence Livermore National Lab., CA (United States); Fretthold, J.K. [Rocky Flats Safe Sites of Colorado, Golden, CO (United States); Slawski, J.W. [Department of Energy, Germantown, MD (United States)

    1997-08-01

    The water spray systems in high efficiency particulate air (HEPA) filter plenums that are used in nearly all Department of Energy (DOE) facilities for protection against fire was designed under the assumption that the HEPA filters would not be damaged by the water sprays. The most likely scenario for filter damage involves filter plugging by the water spray, followed by the fan blowing out the filter medium. A number of controlled laboratory tests that were previously conducted in the late 1980s are reviewed in this paper to provide a technical basis for the potential HEPA filter damage by the water spray system in HEPA filter plenums. In addition to the laboratory tests, the scenario for BEPA filter damage during fires has also occurred in the field. A fire in a four-stage, BEPA filter plenum at Rocky Flats in 1980 caused the first three stages of BEPA filters to blow out of their housing and the fourth stage to severely bow. Details of this recently declassified fire are presented in this paper. Although these previous findings suggest serious potential problems exist with the current water spray system in filter plenums, additional studies are required to confirm unequivocally that DOE`s critical facilities are at risk. 22 refs., 15 figs.

  6. Investigation on the kurtosis filter and the derivation of convolutional sparse filter for impulsive signature enhancement

    Science.gov (United States)

    Jia, Xiaodong; Zhao, Ming; Di, Yuan; Jin, Chao; Lee, Jay

    2017-01-01

    Minimum Entropy Deconvolution (MED) filter, which is a non-parametric approach for impulsive signature detection, has been widely studied recently. Although the merits of the MED filter are manifold, this method tends to over highlight the dominant peaks and its performance becomes less stable when strong noise exists. In order to better understand the behavior of the MED filter, this study first investigated the mathematical fundamentals of the MED filter and then explained the reason why the MED filter tends to over highlight the dominant peaks. In order to pursue finer solutions for weak impulsive signature enhancement, the Convolutional Sparse Filter (CSF) is originally proposed in this work and the derivation of the CSF is presented in details. The superiority of the proposed CSF over the MED filter is validated by both simulated data and experimental data. The results demonstrate that CSF is an effective method for impulsive signature enhancement that could be applied in rotating machines for incipient fault detection.

  7. Ventilation filters as sources of air pollution – Processes occurring on surfaces of used filters

    DEFF Research Database (Denmark)

    Bekö, Gabriel; Halás, Oto; Clausen, Geo

    2004-01-01

    ~ 35 and 55 ppb and slowly increased over time. Within an hour the ozone concentration downstream of the filter had increased to ~ 70 ppb. In contrast, no change in ozone removal efficiency over time was observed for a new filter. The used filter samples were then placed for 24 hours in ambient air......Ozone concentrations were monitored upstream and downstream of used filter samples following 24hours of ventilation with ozone- filtered air. The ozone concentration in the air upstream of the filters was maintained at ~75 ppb while the concentration downstream of the filters was initially between...... (ozone concentration air at an elevated temperature (100°C); or nitrogen. When subsequently placed in the air stream containing 75 ppb of ozone partial regeneration of the filter’s ozone removal capabilities was observed. Regeneration was greatest for the sample that had sat...

  8. Finessing filter scarcity problem in face recognition via multi-fold filter convolution

    Science.gov (United States)

    Low, Cheng-Yaw; Teoh, Andrew Beng-Jin

    2017-06-01

    The deep convolutional neural networks for face recognition, from DeepFace to the recent FaceNet, demand a sufficiently large volume of filters for feature extraction, in addition to being deep. The shallow filter-bank approaches, e.g., principal component analysis network (PCANet), binarized statistical image features (BSIF), and other analogous variants, endure the filter scarcity problem that not all PCA and ICA filters available are discriminative to abstract noise-free features. This paper extends our previous work on multi-fold filter convolution (ℳ-FFC), where the pre-learned PCA and ICA filter sets are exponentially diversified by ℳ folds to instantiate PCA, ICA, and PCA-ICA offspring. The experimental results unveil that the 2-FFC operation solves the filter scarcity state. The 2-FFC descriptors are also evidenced to be superior to that of PCANet, BSIF, and other face descriptors, in terms of rank-1 identification rate (%).

  9. Inner and Outer Coordination Shells of Mg(2+) in CorA Selectivity Filter from Molecular Dynamics Simulations.

    Science.gov (United States)

    Kitjaruwankul, Sunan; Wapeesittipan, Pattama; Boonamnaj, Panisak; Sompornpisut, Pornthep

    2016-01-28

    Structural data of CorA Mg(2+) channels show that the five Gly-Met-Asn (GMN) motifs at the periplasmic loop of the pentamer structure form a molecular scaffold serving as a selectivity filter. Unfortunately, knowledge about the cation selectivity of Mg(2+) channels remains limited. Since Mg(2+) in aqueous solution has a strong first hydration shell and apparent second hydration sphere, the coordination structure of Mg(2+) in a CorA selectivity filter is expected to be different from that in bulk water. Hence, this study investigated the hydration structure and ligand coordination of Mg(2+) in a selectivity filter of CorA using molecular dynamics (MD) simulations. The simulations reveal that the inner-shell structure of Mg(2+) in the filter is not significantly different from that in aqueous solution. The major difference is the characteristic structural features of the outer shell. The GMN residues engage indirectly in the interactions with the metal ion as ligands in the second shell of Mg(2+). Loss of hydrogen bonds between inner- and outer-shell waters observed from Mg(2+) in bulk water is mostly compensated by interactions between waters in the first solvation shell and the GMN motif. Some water molecules in the second shell remain in the selectivity filter and become less mobile to support the metal binding. Removal of Mg(2+) from the divalent cation sensor sites of the protein had an impact on the structure and metal binding of the filter. From the results, it can be concluded that the GMN motif enhances the affinity of the metal binding site in the CorA selectivity filter by acting as an outer coordination ligand.

  10. POF based glucose sensor incorporating grating wavelength filters

    DEFF Research Database (Denmark)

    Hassan, Hafeez Ul; Aasmul, Søren; Bang, Ole

    2014-01-01

    AND RESEARCH IN POLYMER OPTICAL DEVICES; TRIPOD. Within the domain of TRIPOD, research is conducted on "Plastic Optical Fiber based Glucose Sensors Incorporating Grating Wavelength Filters". Research will be focused to optimized fiber tips for better coupling efficiency, reducing the response time of sensor......Medtronic has already developed a plastic fiber based optical sensor to detect the concentration of glucose both in vivo and in-vitro. The glucose sensor is based on a competitive glucose binding affinity assay consisting of a glucose receptor and glucose analog (ligand) contained in a compartment......, more donor acceptor pairs got separated resulting in high intensity and vice versa. This change in optical signal is correlated to glucose concentration. (Fig.1) Medtronic Diabetes and DTU FOTONIK has been working together under the consortium of Marie Curie Research Framework called TRAINING...

  11. Solar Rejection Filter for Large Telescopes

    Science.gov (United States)

    Hemmati, Hamid; Lesh, James

    2009-01-01

    To reject solar radiation photons at the front aperture for large telescopes, a mosaic of large transmission mode filters is placed in front of the telescope or at the aperture of the dome. Filtering options for effective rejection of sunlight include a smaller filter down-path near the focus of the telescope, and a large-diameter filter located in the front of the main aperture. Two types of large filters are viable: reflectance mode and transmittance mode. In the case of reflectance mode, a dielectric coating on a suitable substrate (e.g. a low-thermal-expansion glass) is arranged to reflect only a single, narrow wavelength and to efficiently transmit all other wavelengths. These coatings are commonly referred to as notch filter. In this case, the large mirror located in front of the telescope aperture reflects the received (signal and background) light into the telescope. In the case of transmittance mode, a dielectric coating on a suitable substrate (glass, sapphire, clear plastic, membrane, and the like) is arranged to transmit only a single wavelength and to reject all other wavelengths (visible and near IR) of light. The substrate of the large filter will determine its mass. At first glance, a large optical filter with a diameter of up to 10 m, located in front of the main aperture, would require a significant thickness to avoid sagging. However, a segmented filter supported by a structurally rugged grid can support smaller filters. The obscuration introduced by the grid is minimal because the total area can be made insignificant. This configuration can be detrimental to a diffraction- limited telescope due to diffraction effects at the edges of each sub-panel. However, no discernable degradation would result for a 20 diffraction-limit telescope (a photon bucket). Even the small amount of sagging in each subpanel should have minimal effect in the performance of a non-diffraction limited telescope because the part has no appreciable optical power. If the

  12. DWPF GC FILTER ASSEMBLY SAMPLING AND ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Bannochie, C.; Imrich, K.

    2009-11-11

    On March 18, 2009 a Defense Waste Processing Facility (DWPF) GC Line Filter Assembly was received at the Savannah River National Laboratory (SRNL). This filter assembly was removed from operation following the completion of Sludge Batch 4 processing in the DWPF. Work on this sample was requested in a Technical Assistance Request. This document reports the pictures, observations, samples collected, and analytical results for the assembly. The assembly arrived at SRNL separated into its three component filters: high efficiency particulate air (HEPA)-1, HEPA-2, and a high efficiency mist evaporator (HEME). Each stage of the assembly's media was sampled and examined visually and by scanning electron microscopy (SEM). Solids built up in the filter housing following the first stage HEME, were dissolved in dilute nitric acid and analyzed by ICP-AES and the undissolved white solids were analyzed by x-ray diffraction (XRD). The vast majority of the material in each of the three stages of the DWPF GC Line Filter Assembly appears to be contaminated with a Hg compound that is {approx}59 wt% Hg on a total solids basis. The Hg species was identified by XRD analysis to contain a mixture of Hg{sub 4}(OH)(NO{sub 3}){sub 3} and Hg{sub 10}(OH){sub 4}(NO{sub 3}){sub 6}. Only in the core sample of the second stage HEPA, did this material appear to be completely covering portions of the filter media, possibly explaining the pressure drops observed by DWPF. The fact that the material migrates through the HEME filter and both HEPA filters, and that it was seen collecting on the outlet side of the HEME filter, would seem to indicate that these filters are not efficient at removing this material. Further SRAT off-gas system modeling should help determine the extent of Hg breakthrough past the Mercury Water Wash Tank (MWWT). The SRAT off-gas system has not been modeled since startup of the facility. Improvements to the efficiency of Hg stripping prior to the ammonia scrubber would seem

  13. Hierarchical Bayes Ensemble Kalman Filtering

    CERN Document Server

    Tsyrulnikov, Michael

    2015-01-01

    Ensemble Kalman filtering (EnKF), when applied to high-dimensional systems, suffers from an inevitably small affordable ensemble size, which results in poor estimates of the background error covariance matrix ${\\bf B}$. The common remedy is a kind of regularization, usually an ad-hoc spatial covariance localization (tapering) combined with artificial covariance inflation. Instead of using an ad-hoc regularization, we adopt the idea by Myrseth and Omre (2010) and explicitly admit that the ${\\bf B}$ matrix is unknown and random and estimate it along with the state (${\\bf x}$) in an optimal hierarchical Bayes analysis scheme. We separate forecast errors into predictability errors (i.e. forecast errors due to uncertainties in the initial data) and model errors (forecast errors due to imperfections in the forecast model) and include the two respective components ${\\bf P}$ and ${\\bf Q}$ of the ${\\bf B}$ matrix into the extended control vector $({\\bf x},{\\bf P},{\\bf Q})$. Similarly, we break the traditional backgrou...

  14. Terms of Binding

    NARCIS (Netherlands)

    Sevcenco, A.

    2006-01-01

    The present dissertation aimed at achieving two goals. First, it constitutes an attempt to widen the search for phenomena that bear relevance to the idea that binding has a syntactic residue and is not, therefore, an exclusively semantic matter. Second, it tried to provide the technical means to acc

  15. Cellulose binding domain proteins

    Science.gov (United States)

    Shoseyov, Oded; Shpiegl, Itai; Goldstein, Marc; Doi, Roy

    1998-01-01

    A cellulose binding domain (CBD) having a high affinity for crystalline cellulose and chitin is disclosed, along with methods for the molecular cloning and recombinant production thereof. Fusion products comprising the CBD and a second protein are likewise described. A wide range of applications are contemplated for both the CBD and the fusion products, including drug delivery, affinity separations, and diagnostic techniques.

  16. MD-2 binds cholesterol.

    Science.gov (United States)

    Choi, Soo-Ho; Kim, Jungsu; Gonen, Ayelet; Viriyakosol, Suganya; Miller, Yury I

    2016-02-19

    Cholesterol is a structural component of cellular membranes, which is transported from liver to peripheral cells in the form of cholesterol esters (CE), residing in the hydrophobic core of low-density lipoprotein. Oxidized CE (OxCE) is often found in plasma and in atherosclerotic lesions of subjects with cardiovascular disease. Our earlier studies have demonstrated that OxCE activates inflammatory responses in macrophages via toll-like receptor-4 (TLR4). Here we demonstrate that cholesterol binds to myeloid differentiation-2 (MD-2), a TLR4 ancillary molecule, which is a binding receptor for bacterial lipopolysaccharide (LPS) and is indispensable for LPS-induced TLR4 dimerization and signaling. Cholesterol binding to MD-2 was competed by LPS and by OxCE-modified BSA. Furthermore, soluble MD-2 in human plasma and MD-2 in mouse atherosclerotic lesions carried cholesterol, the finding supporting the biological significance of MD-2 cholesterol binding. These results help understand the molecular basis of TLR4 activation by OxCE and mechanisms of chronic inflammation in atherosclerosis.

  17. Binding and Bulgarian

    NARCIS (Netherlands)

    Schürcks-Grozeva, Lilia Lubomirova

    2003-01-01

    In haar proefschrift analyseert Lilia Schürcks de anaforische verschijnselen in de Bulgaarse taal. Het gaat dan om wederkerende aspecten, uitgedrukt bij woorden als ‘zich’ en ‘elkaar’. De situatie in het Bulgaars blijkt moeilijk in te passen in de klassieke Binding Theory van Noam Chomsky. Bron: RUG

  18. Sequential memory: Binding dynamics

    Science.gov (United States)

    Afraimovich, Valentin; Gong, Xue; Rabinovich, Mikhail

    2015-10-01

    Temporal order memories are critical for everyday animal and human functioning. Experiments and our own experience show that the binding or association of various features of an event together and the maintaining of multimodality events in sequential order are the key components of any sequential memories—episodic, semantic, working, etc. We study a robustness of binding sequential dynamics based on our previously introduced model in the form of generalized Lotka-Volterra equations. In the phase space of the model, there exists a multi-dimensional binding heteroclinic network consisting of saddle equilibrium points and heteroclinic trajectories joining them. We prove here the robustness of the binding sequential dynamics, i.e., the feasibility phenomenon for coupled heteroclinic networks: for each collection of successive heteroclinic trajectories inside the unified networks, there is an open set of initial points such that the trajectory going through each of them follows the prescribed collection staying in a small neighborhood of it. We show also that the symbolic complexity function of the system restricted to this neighborhood is a polynomial of degree L - 1, where L is the number of modalities.

  19. TESTING OF THE DUAL ROTARY FILTER SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Herman, D.; Fowley, M.; Stefanko, D.

    2011-08-29

    The Savannah River National Laboratory (SRNL) installed and tested two hydraulically connected SpinTek rotary microfilter (RMF) units to determine the behavior of a multiple filter system. Both units were successfully controlled by a control scheme written in DELTA-V architecture by Savannah River Remediation (SRR) Process Control Engineering personnel. The control system was tuned to provide satisfactory response to changing conditions during the operation of the multi-filter system. Stability was maintained through the startup and shutdown of one of the filter units while the second was still in operation. The installation configuration originally proposed by the Small Colum Ion Exchange (SCIX) project of independent filter and motor mountings may be susceptible to vibration. Significant stiffening of the filter and motor mounts was required to minimize the vibration. Alignment of the motor to the filter was a challenge in this test configuration. The deployment configuration must be easy to manipulate and allow for fine adjustment. An analysis of the vibration signature of the test system identified critical speeds. Whether it corresponds to the resonance frequency of a rotor radial vibration mode that was excited by rotor unbalance is uncertain based upon the measurements. A relative motion series should be completed on the filter with the final shaft configuration to determine if the resonances exist in the final filter design. The instrumentation selected for deployment, including the concentrate discharge control valve and flow meters, performed well. Automation of the valve control integrated well with the control scheme and when used in concert with the other control variables, allowed automated control of the dual RMF system. The one area of concern with the instrumentation was the condition resulting when the filtrate flow meter operated with less than three gpm. This low flow was at the lower range of performance for the flow meter. This should not be

  20. Spectral properties and geometric interpretation of R-filters

    Institute of Scientific and Technical Information of China (English)

    Tuo LENG

    2009-01-01

    By applying the Fourier analysis, we study the spectral properties of R-filters. Further, we prove that R-filters are a generalization of least squares polynomial adjustment, and we give the geometric interpretation of R-filters.

  1. Technical note: Measurement and expression of granular filter ...

    African Journals Online (AJOL)

    Technical note: Measurement and expression of granular filter cleanliness. ... To aid the systematic analysis of filter media and the troubleshooting of problem filters, this paper firstly proposes a standard procedure for ... Article Metrics.

  2. Predicting the efficiency of deposit removal during filter backwash

    African Journals Online (AJOL)

    The long-term performance of granular media filters used in drinking water ... Keywords: water treatment, sand filters, fluidised backwash, backwash efficiency, backwash modelling, ...... Filter Maintenance and Operations Guidance Manual.

  3. Theoretical model for a Stark anomalous dispersion optical filter

    Science.gov (United States)

    Yin, B.; Shay, T. M.

    1993-01-01

    A theoretical model for the first atomic Stark anomalous dispersion optical filter is reported. The results show the filter may serve as a widely tunable narrow bandwidth and high throughput optical filter for freespace laser communications and remote sensing.

  4. On Rough Intuitionistic Fuzzy Ideals(Filters) in Lattices

    Institute of Scientific and Technical Information of China (English)

    HE Peng-fei; YANG Yong-wei; XIN Xiao-long

    2014-01-01

    In this paper, we introduce a new algebraic structure, called a rough intuitionistic fuzzy ideal(filter) which is a generalized intuitionistic fuzzy ideal(filter) of a lattice and study some related properties of such ideals(filters).

  5. RECOMMENDATION SYSTEM USING BLOOM FILTER IN MAPREDUCE

    Directory of Open Access Journals (Sweden)

    Reena Pagare

    2013-11-01

    Full Text Available Many clients like to use the Web to discover product details in the form of online reviews. The reviews are provided by other clients and specialists. Recommender systems provide an important response to the information overload problem as it presents users more practical and personalized information facilities. Collaborative filtering methods are vital component in recommender systems as they generate high-quality recommendations by influencing the likings of society of similar users. The collaborative filtering method has assumption that people having same tastes choose the same items. The conventional collaborative filtering system has drawbacks as sparse data problem & lack of scalability. A new recommender system is required to deal with the sparse data problem & produce high quality recommendations in large scale mobile environment. MapReduce is a programming model which is widely used for large-scale data analysis. The described algorithm of recommendation mechanism for mobile commerce is user based collaborative filtering using MapReduce which reduces scalability problem in conventional CF system. One of the essential operations for the data analysis is join operation. But MapReduce is not very competent to execute the join operation as it always uses all records in the datasets where only small fraction of datasets are applicable for the join operation. This problem can be reduced by applying bloomjoin algorithm. The bloom filters are constructed and used to filter out redundant intermediate records. The proposed algorithm using bloom filter will reduce the number of intermediate results and will improve the join performance.

  6. VSP wave separation by adaptive masking filters

    Science.gov (United States)

    Rao, Ying; Wang, Yanghua

    2016-06-01

    In vertical seismic profiling (VSP) data processing, the first step might be to separate the down-going wavefield from the up-going wavefield. When using a masking filter for VSP wave separation, there are difficulties associated with two termination ends of the up-going waves. A critical challenge is how the masking filter can restore the energy tails, the edge effect associated with these terminations uniquely exist in VSP data. An effective strategy is to implement masking filters in both τ-p and f-k domain sequentially. Meanwhile it uses a median filter, producing a clean but smooth version of the down-going wavefield, used as a reference data set for designing the masking filter. The masking filter is implemented adaptively and iteratively, gradually restoring the energy tails cut-out by any surgical mute. While the τ-p and the f-k domain masking filters target different depth ranges of VSP, this combination strategy can accurately perform in wave separation from field VSP data.

  7. Ammonia transformation in a biotrickling air filter

    DEFF Research Database (Denmark)

    Nielsen, Lars Peter; Nielsen, Marie Louise; Andersen, Mathias

    2007-01-01

    A simple, tubular biotrickling filter was designed for optimal removal of ammonia and odour in ventilation air from a pig house. The removal and transformation of ammonia was studied in detail by analysis and modelling of chemical gradients through the filter. Good correspondence between measurem......A simple, tubular biotrickling filter was designed for optimal removal of ammonia and odour in ventilation air from a pig house. The removal and transformation of ammonia was studied in detail by analysis and modelling of chemical gradients through the filter. Good correspondence between...... measurements and model was obtained by using conventional substrate and inhibition kinetics of ammonium and nitrite oxidizing bacteria. Highest rates of ammonia removal were observed in the central section of the filter. Near the air outlet and water inlet the process was ammonia limited, while high nitrous...... acid concentrations almost excluded any biological activity near the air inlet and water outlet. Nitrous acid inhibition also stabilized pH at 6.5-7 all through the filter. Being sensitive to both ammonia and nitrous acid the nitrite oxidation process occurred mainly in the filter sections near the air...

  8. Use of astronomy filters in fluorescence microscopy.

    Science.gov (United States)

    Piper, Jörg

    2012-02-01

    Monochrome astronomy filters are well suited for use as excitation or suppression filters in fluorescence microscopy. Because of their particular optical design, such filters can be combined with standard halogen light sources for excitation in many fluorescent probes. In this "low energy excitation," photobleaching (fading) or other irritations of native specimens are avoided. Photomicrographs can be taken from living motile fluorescent specimens also with a flash so that fluorescence images can be created free from indistinctness caused by movement. Special filter cubes or dichroic mirrors are not needed for our method. By use of suitable astronomy filters, fluorescence microscopy can be carried out with standard laboratory microscopes equipped with condensers for bright-field (BF) and dark-field (DF) illumination in transmitted light. In BF excitation, the background brightness can be modulated in tiny steps up to dark or black. Moreover, standard industry microscopes fitted with a vertical illuminator for examinations of opaque probes in DF or BF illumination based on incident light (wafer inspections, for instance) can also be used for excitation in epi-illumination when adequate astronomy filters are inserted as excitatory and suppression filters in the illuminating and imaging light path. In all variants, transmission bands can be modulated by transmission shift.

  9. Development of a spatial filtering apparatus

    Science.gov (United States)

    Wilson, Nicolle

    This thesis contains a discussion of the theoretical background for Fourier spatial filtering and a description of the design and construction of a portable in-class spatial filtering apparatus. A portable, in-class spatial filtering demonstration apparatus was designed and built. This apparatus uses liquid crystal display (LCD) panels from two projectors as the object and filter masks. The blue LCD panel from the first projector serves as the object mask, and the red panel from the second projector serves as the filter mask. The panels were extracted from their projectors and mounted onto aluminum blocks which are held in place by optical component mounts. Images are written to the LCD panels via custom open source software developed for this apparatus which writes independent monochromatic images to the video signal. The software has two monochromatic image windows, basic image manipulation tools, and two video feed input display windows. Two complementary metal-oxide semiconductor (CMOS) sensors are positioned to record the reconstructed image of the object mask and the diffraction pattern created by the object mask. The object and filter mask can be digitally changed and the effects on the filtered image and diffraction pattern can be observed in real-time. The entire apparatus is assembled onto a rolling cart which allows it to be easily taken into classrooms.

  10. Dedusting and filtering technology; Entstaubungs- und Filtertechnik

    Energy Technology Data Exchange (ETDEWEB)

    Selck, S.; Stockmann, H.W.; Both, R. [Deutsche Montan Technologie GmbH, Essen (Germany). Gas and Fire Div.

    2004-07-01

    For the further development of the filtration and dedusting technology within the last research period the new regulations in occupational hygiene concerning dust as well as ISO and EN standards have been considered. Also the new requirements concerning fire and explosion protection filter materials based in the test regulations for synthetic materials have been taken into account. The adoption of these new regulations inhibits the further use of the available high effective filter materials in underground coal mines. The development of new filter materials has been forced by the test regulations for synthetic materials, as the specific aspects of electrostatic behaviour, soot and toxic gases formed by burning of filter materials impacting the CO self rescue filters, have been taken into account. Even these requirements are partially inhibiting high filter efficiencies and air flows, all the requirements have been fulfilled on a high level on filter efficiencies matching the present state of art in occupational hygiene as reported in the Silicosis Reports Vol. 20 and 21. (orig.)

  11. A Hierarchical Bayes Ensemble Kalman Filter

    Science.gov (United States)

    Tsyrulnikov, Michael; Rakitko, Alexander

    2017-01-01

    A new ensemble filter that allows for the uncertainty in the prior distribution is proposed and tested. The filter relies on the conditional Gaussian distribution of the state given the model-error and predictability-error covariance matrices. The latter are treated as random matrices and updated in a hierarchical Bayes scheme along with the state. The (hyper)prior distribution of the covariance matrices is assumed to be inverse Wishart. The new Hierarchical Bayes Ensemble Filter (HBEF) assimilates ensemble members as generalized observations and allows ordinary observations to influence the covariances. The actual probability distribution of the ensemble members is allowed to be different from the true one. An approximation that leads to a practicable analysis algorithm is proposed. The new filter is studied in numerical experiments with a doubly stochastic one-variable model of "truth". The model permits the assessment of the variance of the truth and the true filtering error variance at each time instance. The HBEF is shown to outperform the EnKF and the HEnKF by Myrseth and Omre (2010) in a wide range of filtering regimes in terms of performance of its primary and secondary filters.

  12. Filtering in Hybrid Dynamic Bayesian Networks

    Science.gov (United States)

    Andersen, Morten Nonboe; Andersen, Rasmus Orum; Wheeler, Kevin

    2000-01-01

    We implement a 2-time slice dynamic Bayesian network (2T-DBN) framework and make a 1-D state estimation simulation, an extension of the experiment in (v.d. Merwe et al., 2000) and compare different filtering techniques. Furthermore, we demonstrate experimentally that inference in a complex hybrid DBN is possible by simulating fault detection in a watertank system, an extension of the experiment in (Koller & Lerner, 2000) using a hybrid 2T-DBN. In both experiments, we perform approximate inference using standard filtering techniques, Monte Carlo methods and combinations of these. In the watertank simulation, we also demonstrate the use of 'non-strict' Rao-Blackwellisation. We show that the unscented Kalman filter (UKF) and UKF in a particle filtering framework outperform the generic particle filter, the extended Kalman filter (EKF) and EKF in a particle filtering framework with respect to accuracy in terms of estimation RMSE and sensitivity with respect to choice of network structure. Especially we demonstrate the superiority of UKF in a PF framework when our beliefs of how data was generated are wrong. Furthermore, we investigate the influence of data noise in the watertank simulation using UKF and PFUKD and show that the algorithms are more sensitive to changes in the measurement noise level that the process noise level. Theory and implementation is based on (v.d. Merwe et al., 2000).

  13. Efficiency analysis of color image filtering

    Directory of Open Access Journals (Sweden)

    Egiazarian Karen

    2011-01-01

    Full Text Available Abstract This article addresses under which conditions filtering can visibly improve the image quality. The key points are the following. First, we analyze filtering efficiency for 25 test images, from the color image database TID2008. This database allows assessing filter efficiency for images corrupted by different noise types for several levels of noise variance. Second, the limit of filtering efficiency is determined for independent and identically distributed (i.i.d. additive noise and compared to the output mean square error of state-of-the-art filters. Third, component-wise and vector denoising is studied, where the latter approach is demonstrated to be more efficient. Fourth, using of modern visual quality metrics, we determine that for which levels of i.i.d. and spatially correlated noise the noise in original images or residual noise and distortions because of filtering in output images are practically invisible. We also demonstrate that it is possible to roughly estimate whether or not the visual quality can clearly be improved by filtering.

  14. An efficient pseudomedian filter for tiling microrrays

    Directory of Open Access Journals (Sweden)

    Gerstein Mark B

    2007-06-01

    Full Text Available Abstract Background Tiling microarrays are becoming an essential technology in the functional genomics toolbox. They have been applied to the tasks of novel transcript identification, elucidation of transcription factor binding sites, detection of methylated DNA and several other applications in several model organisms. These experiments are being conducted at increasingly finer resolutions as the microarray technology enjoys increasingly greater feature densities. The increased densities naturally lead to increased data analysis requirements. Specifically, the most widely employed algorithm for tiling array analysis involves smoothing observed signals by computing pseudomedians within sliding windows, a O(n2logn calculation in each window. This poor time complexity is an issue for tiling array analysis and could prove to be a real bottleneck as tiling microarray experiments become grander in scope and finer in resolution. Results We therefore implemented Monahan's HLQEST algorithm that reduces the runtime complexity for computing the pseudomedian of n numbers to O(nlogn from O(n2logn. For a representative tiling microarray dataset, this modification reduced the smoothing procedure's runtime by nearly 90%. We then leveraged the fact that elements within sliding windows remain largely unchanged in overlapping windows (as one slides across genomic space to further reduce computation by an additional 43%. This was achieved by the application of skip lists to maintaining a sorted list of values from window to window. This sorted list could be maintained with simple O(log n inserts and deletes. We illustrate the favorable scaling properties of our algorithms with both time complexity analysis and benchmarking on synthetic datasets. Conclusion Tiling microarray analyses that rely upon a sliding window pseudomedian calculation can require many hours of computation. We have eased this requirement significantly by implementing efficient algorithms that

  15. Materials for Bulk Acoustic Resonators and Filters

    Science.gov (United States)

    Loebl, Hans-Peter

    2003-03-01

    Highly selective solidly mounted bulk acoustic wave (BAW) band pass filters are suited for mobile and wireless systems in the GHz frequency range between 0.8 and 10 GHz. Electro-acoustic thin film BAW resonators are the building blocks these BAW filters. Piezoelectric materials used in these resonators include mainly AlN or ZnO which can be deposited by dedicated thin film sputter deposition techniques. Using these piezo-electric materials and using suited materials for the acoustic Bragg reflector, BAW resonators with high quality factors can be fabricated. The achievable filter bandwidth is approximately 4Alternatively, also ferroelectric thin films might be used to achieve higher coupling coefficient and thus filter bandwidth. BAW resonators and filters have been designed and fabricated on 6" Silicon and glass wafers. Results are presented for resonators and filters operating between 1.95 and 8 GHz. The talk will give an overview of the material aspects which are important for BAW devices. It will be shown that modeling of the resonator and filter response using 1D electro-acoustic simulation (1,2) which includes losses is essential to extract acoustic and electrical material parameters. (1) Solidly Mounted Bulk Acoustic Wave Filters for the Ghz Frequency Range, H.P. Loebl, C. Metzmacher , D.N.Peligrad , R. Mauczok , M. Klee , W. Brand , R.F. Milsom , P.Lok , F.van Straten , A. Tuinhout , J.W.Lobeek, IEEE 2002 Ultrasonics Symposium Munich, October 2002. (2) Combined Acoustic-Electromagnetic Simulation Of Thin-Film Bulk Acoustic Wave Filters, R.F. Milsom, H-P. Löbl, D.N. Peligrad, J-W. Lobeek, A. Tuinhout, R. H. ten Dolle IEEE 2002 Ultrasonics Symposium Munich, October 2002.

  16. Megalin binds and mediates cellular internalization of folate binding protein

    DEFF Research Database (Denmark)

    Birn, Henrik; Zhai, Xiaoyue; Holm, Jan

    2005-01-01

    Folate is an essential vitamin involved in a number of biological processes. High affinity folate binding proteins (FBPs) exist both as glycosylphosphatidylinositol-linked, membrane associated folate binding proteins and as soluble FBPs in plasma and some secretory fluids such as milk, saliva...... to bind and mediate cellular uptake of FBP. Surface plasmon resonance analysis shows binding of bovine and human milk FBP to immobilized megalin, but not to low density lipoprotein receptor related protein. Binding of (125)I-labeled folate binding protein (FBP) to sections of kidney proximal tubule, known...

  17. Optional inferior vena caval filters: where are we now?

    LENUS (Irish Health Repository)

    Keeling, A N

    2008-08-01

    With the advent of newer optional\\/retrievable inferior vena caval filters, there has been a rise in the number of filters inserted globally. This review article examines the currently available approved optional filter models, outlines the clinical indications for filter insertion and examines the expanding indications. Additionally, the available evidence behind the use of optional filters is reviewed, the issue of anticoagulation is discussed and possible future filter developments are considered.

  18. Tunable phase-only optical filters with a uniaxial crystal.

    Science.gov (United States)

    Xiao, Fanrong; Yuan, Jinghe; Wang, Guiying; Xu, Zhizhan

    2004-06-10

    A novel method of fabricating phase-only optical filters that is based on the properties of a uniaxial crystal is proposed. With these optical filters, the phase differences are tunable among the different filter zones. Many focal patterns can be obtained if these optical filters are placed in front of a lens; furthermore, these optical filters can also be used to make up for the distortions in fabrications in which they were used only as untunable optical filters.

  19. Kullback-Leibler Divergence Approach to Partitioned Update Kalman Filter

    OpenAIRE

    Raitoharju, Matti; García-Fernández, Ángel F.; Piché, Robert

    2016-01-01

    Kalman filtering is a widely used framework for Bayesian estimation. The partitioned update Kalman filter applies a Kalman filter update in parts so that the most linear parts of measurements are applied first. In this paper, we generalize partitioned update Kalman filter, which requires the use oft the second order extended Kalman filter, so that it can be used with any Kalman filter extension. To do so, we use a Kullback-Leibler divergence approach to measure the nonlinearity of the measure...

  20. Bandpass filters for thermophotovoltaic conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Demichelis, F.; Minetti-Mezzetti, E.; Agnello, M.; Perotto, V.

    1982-01-01

    The design of dielectric-metal-dielectric filters especially suitable for use as wide bandpass filters with a high visible and a low IR transmittance is described. A refining method is applied to optimize the transmittance in the part of the spectrum corresponding to the spectral response of the solar cells and at the same time to preserve a high reflectance at longer wavelengths. These filters can provide a considerable transmittance over a wide band of the spectrum with a very low transmittance in the rejection regions.

  1. GENERALIZED FUZZY FILTERS OF BL-ALGEBRAS

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The concept of quasi-coincidence of a fuzzy interval value with an interval valued fuzzy set is considered. In fact, this is a generalization of quasi-coincidence of a fuzzy point with a fuzzy set. By using this new idea, the notion of interval valued (∈, ∈∨q)-fuzzy filters in BL-algebras which is a generalization of fuzzy filters of BL-algebras, is defined, and related properties are investigated. In particular, the concept of a fuzzy subgroup with thresholds is extended to the concept of an interval valued fuzzy filter with thresholds in BL-algebras.

  2. Continuous-Discrete Path Integral Filtering

    Directory of Open Access Journals (Sweden)

    Bhashyam Balaji

    2009-08-01

    Full Text Available A summary of the relationship between the Langevin equation, Fokker-Planck-Kolmogorov forward equation (FPKfe and the Feynman path integral descriptions of stochastic processes relevant for the solution of the continuous-discrete filtering problem is provided in this paper. The practical utility of the path integral formula is demonstrated via some nontrivial examples. Specifically, it is shown that the simplest approximation of the path integral formula for the fundamental solution of the FPKfe can be applied to solve nonlinear continuous-discrete filtering problems quite accurately. The Dirac-Feynman path integral filtering algorithm is quite simple, and is suitable for real-time implementation.

  3. The Handbook of Nonwoven Filter Media

    OpenAIRE

    Dr. Larry C. Wadsworth,

    2007-01-01

    The Handbook of Nonwoven Filter Media is a new textbook and is one of the few books dealing with the subject of nonwoven filter media through the entire text. It is highly recommended as a prime reference for people in the nonwovens industry. This book culminates a productive career in the field and impressively lives up to the author’s aim, as stated in the “Preface,” “to provide the reader with a fundamental understanding of nonwoven filter media.” Gas, liquid, and engine filtration are dis...

  4. Nonlinear projective filtering in a data stream

    CERN Document Server

    Schreiber, T; Schreiber, Thomas; Richter, Marcus

    1998-01-01

    We introduce a modified algorithm to perform nonlinear filtering of a time series by locally linear phase space projections. Unlike previous implementations, the algorithm can be used not only for a posteriori processing but includes the possibility to perform real time filtering in a data stream. The data base that represents the phase space structure generated by the data is updated dynamically. This also allows filtering of non-stationary signals and dynamic parameter adjustment. We discuss exemplary applications, including the real time extraction of the fetal electrocardiogram from abdominal recordings.

  5. Orchard navigation using derivative free Kalman filtering

    DEFF Research Database (Denmark)

    Hansen, Søren; Bayramoglu, Enis; Andersen, Jens Christian

    2011-01-01

    This paper describes the use of derivative free filters for mobile robot localization and navigation in an orchard. The localization algorithm fuses odometry and gyro measurements with line features representing the surrounding fruit trees of the orchard. The line features are created on basis of 2......D laser scanner data by a least square algorithm. The three derivative free filters are compared to an EKF based localization method on a typical run covering four rows in the orchard. The Matlab R toolbox Kalmtool is used for easy switching between different filter implementations without the need...

  6. Dominant Correlogram Based Particle Filter Tracking

    Institute of Scientific and Technical Information of China (English)

    MAO Yan-fen; SHI Peng-fei

    2005-01-01

    A novel dominant correlogram based particle filter was proposed for an object tracking in visual surveillance. Particle filter outperforms the Kalman filter in non-linear and non-Gaussian estimation problem. This paper proposed incorporating spatial information into visual feature, and yields a reliable likelihood description of the observation and prediction. A similarity-ratio is defined to evaluate the effectivity of different similarity measurements in weighing samples. The experimental results demonstrate the effective and robust performance compared with the histogram based tracking in traffic scenes.

  7. Parameter Estimation, Model Reduction and Quantum Filtering

    CERN Document Server

    Chase, Bradley A

    2009-01-01

    This dissertation explores the topics of parameter estimation and model reduction in the context of quantum filtering. Chapters 2 and 3 provide a review of classical and quantum probability theory, stochastic calculus and filtering. Chapter 4 studies the problem of quantum parameter estimation and introduces the quantum particle filter as a practical computational method for parameter estimation via continuous measurement. Chapter 5 applies these techniques in magnetometry and studies the estimator's uncertainty scalings in a double-pass atomic magnetometer. Chapter 6 presents an efficient feedback controller for continuous-time quantum error correction. Chapter 7 presents an exact model of symmetric processes of collective qubit systems.

  8. Quantum filtering of optical coherent states

    DEFF Research Database (Denmark)

    Wittmann, C.; Elser, D.; Andersen, Ulrik Lund

    2008-01-01

    We propose and experimentally demonstrate nondestructive and noiseless removal (filtering) of vacuum states from an arbitrary set of coherent states of continuous variable systems. Errors, i.e., vacuum states in the quantum information are diagnosed through a weak measurement, and on that basis......, probabilistically filtered out. We consider three different filters based on on-off detection, phase stabilized, and phase randomized homodyne detection. We find that on-off detection, optimal in the ideal theoretical setting, is superior to the homodyne strategy also in a practical setting....

  9. Directional Joint Bilateral Filter for Depth Images

    Directory of Open Access Journals (Sweden)

    Anh Vu Le

    2014-06-01

    Full Text Available Depth maps taken by the low cost Kinect sensor are often noisy and incomplete. Thus, post-processing for obtaining reliable depth maps is necessary for advanced image and video applications such as object recognition and multi-view rendering. In this paper, we propose adaptive directional filters that fill the holes and suppress the noise in depth maps. Specifically, novel filters whose window shapes are adaptively adjusted based on the edge direction of the color image are presented. Experimental results show that our method yields higher quality filtered depth maps than other existing methods, especially at the edge boundaries.

  10. Electrostatic air filters generated by electric fields

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Biermann, A.H.; Hebard, H.D.; Lum, B.Y.; Kuhl, W.D.

    1981-01-27

    This paper presents theoretical and experimental findings on fibrous filters converted to electrostatic operation by a nonionizing electric field. Compared to a conventional fibrous filter, the electrostatic filter has a higher efficiency and a longer, useful life. The increased efficiency is attributed to a time independent attraction between polarized fibers and charged, polarized particles and a time dependent attraction between charged fibers and charged, polarized particles. The charge on the fibers results from a dynamic process of charge accumulation due to the particle deposits and a charge dissipation due to the fiber conductivity.

  11. High-Tc superconductor coplanar waveguide filter

    Science.gov (United States)

    Chew, Wilbert; Bajuk, Louis J.; Cooley, Thomas W.; Foote, Marc C.; Hunt, Brian D.; Rascoe, Daniel L.; Riley, A. L.

    1991-01-01

    Coplanar waveguide (CPW) low-pass filters made of YBa2Cu3O(7-delta) (YBCO) on LaAlO3 substrates, with dimensions suited for integrated circuits, were fabricated and packaged. A complete filter gives a true idea of the advantages and difficulties in replacing thin-film metal with a high-temperature superconductor in a practical circuit. Measured insertion losses in liquid nitrogen were superior to the loss of a similar thin-film copper filter throughout the 0- to 9.5-GHz passband. These results demonstrate the performance of fully patterned YBCO in a practical CPW structure after sealing in a hermetic package.

  12. Electrically heated particulate filter embedded heater design

    Science.gov (United States)

    Gonze, Eugene V.; Chapman, Mark R.

    2014-07-01

    An exhaust system that processes exhaust generated by an engine is provided. The system generally includes a particulate filter (PF) that filters particulates from the exhaust wherein an upstream end of the PF receives exhaust from the engine and wherein an upstream surface of the particulate filter includes machined grooves. A grid of electrically resistive material is inserted into the machined grooves of the exterior upstream surface of the PF and selectively heats exhaust passing through the grid to initiate combustion of particulates within the PF.

  13. Fingerprint image enhancement using CNN filtering techniques.

    Science.gov (United States)

    Saatci, Ertugrul; Tavsanoglu, Vedat

    2003-12-01

    Due to noisy acquisition devices and variation in impression conditions, the ridgelines of fingerprint images are mostly corrupted by various kinds of noise causing cracks, scratches and bridges in the ridges as well as blurs. These cause matching errors in fingerprint recognition. For an effective recognition the correct ridge pattern is essential which requires the enhancement of fingerprint images. Segment by segment analysis of the fingerprint pattern yields various ridge direction and frequencies. By selecting a directional filter with correct filter parameters to match ridge features at each point, we can effectively enhance fingerprint ridges. This paper proposes a fingerprint image enhancement based on CNN Gabor-Type filters.

  14. Stable Quantum Filters with Scattering Phenomena

    Institute of Scientific and Technical Information of China (English)

    W. U. Ahamed; C. Kambhampati

    2008-01-01

    Quantum neural network filters for signal processing have received a lot of interest in the recent past. The implementations of these filters had a number of design parameters that led to numerical inefficiencies. At the same time the solution procedures employed were explicit in that the evolution of the time-varying functions had to be controlled. This often led to numerical instabilities. This paper outlines a procedure for improving the stability, numerical efficiency, and the accuracy of quantum neural network filters. Two examples are used to illustrate the principles employed.

  15. Filtering Spam: Current Trends and Techniques

    Directory of Open Access Journals (Sweden)

    Geerthik S.

    2013-07-01

    Full Text Available This article gives an overview about latest trend and techniques in spam filtering. We analyzed the problems which is introduced by spam ,what spam actually do and how to measure the spam .This article mainly focuses on automated, non-interactive filters, with a broad review ranging from commercial implementations to ideas confined to current research papers. The solutions using both machine and non –machine learning approaches are reviewed and taxonomy of different approaches is presented. While a range of different techniques have and continue to be evaluated in academic research, heuristic and Bayesian filtering, along with its variants provide the greatest potential for future spam prevention.

  16. Adaptive filtering using Higher Order Statistics (HOS

    Directory of Open Access Journals (Sweden)

    Abdelghani Manseur

    2012-03-01

    Full Text Available The performed job, in this study, consists in studying adaptive filters and higher order statistics (HOS to ameliorate their performances, by extension of linear case to non linear filters via Volterra series. This study is, principally, axed on: „ Choice of the adaptation step and convergence conditions. „ Convergence rate. „ Adaptive variation of the convergence factor, according to the input signal. The obtained results, with real signals, have shown computationally efficient and numerically stable algorithms for adaptive nonlinear filtering while keeping relatively simple computational complexity.

  17. Optimal use of conservation and accessibility filters in microRNA target prediction.

    Directory of Open Access Journals (Sweden)

    Ray M Marín

    Full Text Available It is generally accepted that filtering microRNA (miRNA target predictions by conservation or by accessibility can reduce the false discovery rate. However, these two strategies are usually not exploited in a combined and flexible manner. Here, we introduce PACCMIT, a flexible method that filters miRNA binding sites by their conservation, accessibility, or both. The improvement in performance obtained with each of these three filters is demonstrated on the prediction of targets for both i highly and ii weakly conserved miRNAs, i.e., in two scenarios in which the miRNA-target interactions are subjected to different evolutionary pressures. We show that in the first scenario conservation is a better filter than accessibility (as both sensitivity and precision are higher among the top predictions and that the combined filter improves performance of PACCMIT even further. In the second scenario, on the other hand, the accessibility filter performs better than both the conservation and combined filters, suggesting that the site conservation is not equally effective in rejecting false positive predictions for all miRNAs. Regarding the quality of the ranking criterion proposed by Robins and Press and used in PACCMIT, it is shown that top ranking interactions correspond to more downregulated proteins than do the lower ranking interactions. Comparison with several other target prediction algorithms shows that the ranking of predictions provided by PACCMIT is at least as good as the ranking generated by other conservation-based methods and considerably better than the energy-based ranking used in other accessibility-based methods.

  18. Geometric calibration of lens and filter distortions for multispectral filter-wheel cameras.

    Science.gov (United States)

    Brauers, Johannes; Aach, Til

    2011-02-01

    High-fidelity color image acquisition with a multispectral camera utilizes optical filters to separate the visible electromagnetic spectrum into several passbands. This is often realized with a computer-controlled filter wheel, where each position is equipped with an optical bandpass filter. For each filter wheel position, a grayscale image is acquired and the passbands are finally combined to a multispectral image. However, the different optical properties and non-coplanar alignment of the filters cause image aberrations since the optical path is slightly different for each filter wheel position. As in a normal camera system, the lens causes additional wavelength-dependent image distortions called chromatic aberrations. When transforming the multispectral image with these aberrations into an RGB image, color fringes appear, and the image exhibits a pincushion or barrel distortion. In this paper, we address both the distortions caused by the lens and by the filters. Based on a physical model of the bandpass filters, we show that the aberrations caused by the filters can be modeled by displaced image planes. The lens distortions are modeled by an extended pinhole camera model, which results in a remaining mean calibration error of only 0.07 pixels. Using an absolute calibration target, we then geometrically calibrate each passband and compensate for both lens and filter distortions simultaneously. We show that both types of aberrations can be compensated and present detailed results on the remaining calibration errors.

  19. UV Fluorescence Photography of Works of Art : Replacing the Traditional UV Cut Filters with Interference Filters

    Directory of Open Access Journals (Sweden)

    Luís BRAVO PEREIRA

    2010-09-01

    Full Text Available For many years filters like the Kodak Wratten E series, or the equivalent Schneider B+W 415, were used as standard UV cut filters, necessary to obtain good quality on UV Fluorescence photography. The only problem with the use of these filters is that, when they receive the UV radiation that they should remove, they present themselves an internal fluorescence as side effect, that usually reduce contrast and quality on the final image. This article presents the results of our experiences on using some innovative filters, that appeared available on the market in recent years, projected to adsorb UV radiation even more efficiently than with the mentioned above pigment based standard filters: the interference filters for UV rejection (and, usually, for IR rejection too manufactured using interference layers, that present better results than the pigment based filters. The only problem with interference filters type is that they are sensitive to the rays direction and, because of that, they are not adequate to wide-angle lenses. The internal fluorescence for three filters: the B+W 415 UV cut (equivalent to the Kodak Wratten 2E, pigment based, the B+W 486 UV IR cut (an interference type filter, used frequently on digital cameras to remove IR or UV and the Baader UVIR rejection filter (two versions of this interference filter were used had been tested and compared. The final quality of the UV fluorescence images seems to be of a superior quality when compared to the images obtained with classic filters.

  20. Desensitized Optimal Filtering and Sensor Fusion Tool Kit Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Research on desensitized optimal filtering techniques and a navigation and sensor fusion tool kit using advanced filtering techniques is proposed. Research focuses...