WorldWideScience

Sample records for bigheadedturtle platysternon description

  1. The complete mitochondrial genome of the enigmatic bigheadedturtle (Platysternon): description of unusual genomic features and thereconciliation of phylogenetic hypotheses based on mitochondrial andnuclear DNA

    Energy Technology Data Exchange (ETDEWEB)

    Parham, James F.; Feldman, Chris R.; Boore, Jeffrey L.

    2005-12-28

    The big-headed turtle (Platysternon megacephalum) from east Asia is the sole living representative of a poorly-studied turtle lineage (Platysternidae). It has no close living relatives, and its phylogenetic position within turtles is one of the outstanding controversies in turtle systematics. Platysternon was traditionally considered to be close to snapping turtles (Chelydridae) based on some studies of its morphology and mitochondrial (mt) DNA, however, other studies of morphology and nuclear (nu) DNA do not support that hypothesis. We sequenced the complete mt genome of Platysternon and the nearly complete mt genomes of two other relevant turtles and compared them to turtle mt genomes from the literature to form the largest molecular dataset used to date to address this issue. The resulting phylogeny robustly rejects the placement of Platysternon with Chelydridae, but instead shows that it is a member of the Testudinoidea, a diverse, nearly globally-distributed group that includes pond turtles and tortoises. We also discovered that Platysternon mtDNA has large-scale gene rearrangements and possesses two, nearly identical, control regions, features that distinguish it from all other studied turtles. Our study robustly determines the phylogenetic placement of Platysternon and provides a well-resolved outline of major turtle lineages, while demonstrating the significantly greater resolving power of comparing large amounts of mt sequence over that of short fragments. Earlier phylogenies placing Platysternon with chelydrids required a temporal gap in the fossil record that is now unnecessary. The duplicated control regions and gene rearrangements of the Platysternon mt DNA probably resulted from the duplication of part of the genome and then the subsequent loss of redundant genes. Although it is possible that having two control regions may provide some advantage, explaining why the control regions would be maintained while some of the duplicated genes were eroded

  2. The complete mitochondrial genome of the enigmatic bigheaded turtle (Platysternon: description of unusual genomic features and the reconciliation of phylogenetic hypotheses based on mitochondrial and nuclear DNA

    Directory of Open Access Journals (Sweden)

    Feldman Chris R

    2006-02-01

    Full Text Available Abstract Background The big-headed turtle (Platysternon megacephalum from east Asia is the sole living representative of a poorly-studied turtle lineage (Platysternidae. It has no close living relatives, and its phylogenetic position within turtles is one of the outstanding controversies in turtle systematics. Platysternon was traditionally considered to be close to snapping turtles (Chelydridae based on some studies of its morphology and mitochondrial (mt DNA, however, other studies of morphology and nuclear (nu DNA do not support that hypothesis. Results We sequenced the complete mt genome of Platysternon and the nearly complete mt genomes of two other relevant turtles and compared them to turtle mt genomes from the literature to form the largest molecular dataset used to date to address this issue. The resulting phylogeny robustly rejects the placement of Platysternon with Chelydridae, but instead shows that it is a member of the Testudinoidea, a diverse, nearly globally-distributed group that includes pond turtles and tortoises. We also discovered that Platysternon mtDNA has large-scale gene rearrangements and possesses two, nearly identical, control regions, features that distinguish it from all other studied turtles. Conclusion Our study robustly determines the phylogenetic placement of Platysternon and provides a well-resolved outline of major turtle lineages, while demonstrating the significantly greater resolving power of comparing large amounts of mt sequence over that of short fragments. Earlier phylogenies placing Platysternon with chelydrids required a temporal gap in the fossil record that is now unnecessary. The duplicated control regions and gene rearrangements of the Platysternon mtDNA probably resulted from the duplication of part of the genome and then the subsequent loss of redundant genes. Although it is possible that having two control regions may provide some advantage, explaining why the control regions would be

  3. Diet of the endangered big-headed turtle Platysternon megacephalum

    Science.gov (United States)

    Hau, Billy C.H.; Karraker, Nancy E.

    2016-01-01

    Populations of the big-headed turtle Platysternon megacephalum are declining at unprecedented rates across most of its distribution in Southeast Asia owing to unsustainable harvest for pet, food, and Chinese medicine markets. Research on Asian freshwater turtles becomes more challenging as populations decline and basic ecological information is needed to inform conservation efforts. We examined fecal samples collected from P. megacephalum in five streams in Hong Kong to quantify the diet, and we compared the germination success of ingested and uningested seeds. Fruits, primarily of Machilus spp., were most frequently consumed, followed by insects, plant matter, crabs and mollusks. The niche breadth of adults was wider than that of juveniles. Diet composition differed between sites, which may be attributable to the history of illegal trapping at some sites, which reduced the proportion of larger and older individuals. Digestion of Machilus spp. fruits by P. megacephalum enhanced germination success of seeds by about 30%. However, most digested seeds are likely defecated in water in this highly aquatic species, which limits the potential benefit to dispersal. The results of our study can be used by conservation-related captive breeding programs to ensure a more optimal diet is provided to captive P. megacephalum. PMID:27994979

  4. Diet of the endangered big-headed turtle Platysternon megacephalum

    Directory of Open Access Journals (Sweden)

    Yik-Hei Sung

    2016-12-01

    Full Text Available Populations of the big-headed turtle Platysternon megacephalum are declining at unprecedented rates across most of its distribution in Southeast Asia owing to unsustainable harvest for pet, food, and Chinese medicine markets. Research on Asian freshwater turtles becomes more challenging as populations decline and basic ecological information is needed to inform conservation efforts. We examined fecal samples collected from P. megacephalum in five streams in Hong Kong to quantify the diet, and we compared the germination success of ingested and uningested seeds. Fruits, primarily of Machilus spp., were most frequently consumed, followed by insects, plant matter, crabs and mollusks. The niche breadth of adults was wider than that of juveniles. Diet composition differed between sites, which may be attributable to the history of illegal trapping at some sites, which reduced the proportion of larger and older individuals. Digestion of Machilus spp. fruits by P. megacephalum enhanced germination success of seeds by about 30%. However, most digested seeds are likely defecated in water in this highly aquatic species, which limits the potential benefit to dispersal. The results of our study can be used by conservation-related captive breeding programs to ensure a more optimal diet is provided to captive P. megacephalum.

  5. Husbandry and propagation of the Chinese big-headed turtle (Platysternon megacephalum) at the Wildlife Conservation Society's Prospect Park Zoo.

    Science.gov (United States)

    Shelmidine, Nichole; Murphy, Brittany; Massarone, Katelyn

    2016-01-01

    Turtles worldwide are facing increasing pressures on their wild populations and many are listed as endangered or critically endangered. Chinese big-headed turtles (Platysternon megacephalum) are currently listed on IUCN's Red List as endangered and on Cites Appendix II. As part of the Wildlife Conservation Society's initiative on turtle and tortoise conservation, this species became a focus for propagation at Prospect Park Zoo (PPZ) in 2008. PPZ successfully bred and obtained eggs, with successful hatchings in 2013 and 2014. The staff fluctuated water and ambient temperatures along with photoperiod in order to simulate seasonal changes. Each May, the female was placed in the male's enclosure daily for at least 15 min for breeding. Once two confirmed copulations were observed, breeding introductions were discontinued. The female laid her eggs in July and August, and clutch sizes ranged from 5 to 6 eggs. Eggs were successfully incubated in a RCOM Juragon reptile incubator at 23.3°C with 90-95% humidity. The eggs hatched after an average incubation period of 102 days (98-105 days, n = 9). Hatchlings had a mean body mass of 8.84 g (8.11-10 g) and average carapace length × width of 36.17 × 32.20 mm. This article aims to share the team's experiences working with this species as well as build upon previous publications and successes. Our hope is that with continued efforts to increase our knowledgebase a future viable, sustainable North American captive population will become a reality for this species.

  6. Recombination and evolution of duplicate control regions in the mitochondrial genome of the Asian big-headed turtle, Platysternon megacephalum.

    Directory of Open Access Journals (Sweden)

    Chenfei Zheng

    Full Text Available Complete mitochondrial (mt genome sequences with duplicate control regions (CRs have been detected in various animal species. In Testudines, duplicate mtCRs have been reported in the mtDNA of the Asian big-headed turtle, Platysternon megacephalum, which has three living subspecies. However, the evolutionary pattern of these CRs remains unclear. In this study, we report the completed sequences of duplicate CRs from 20 individuals belonging to three subspecies of this turtle and discuss the micro-evolutionary analysis of the evolution of duplicate CRs. Genetic distances calculated with MEGA 4.1 using the complete duplicate CR sequences revealed that within turtle subspecies, genetic distances between orthologous copies from different individuals were 0.63% for CR1 and 1.2% for CR2app:addword:respectively, and the average distance between paralogous copies of CR1 and CR2 was 4.8%. Phylogenetic relationships were reconstructed from the CR sequences, excluding the variable number of tandem repeats (VNTRs at the 3' end using three methods: neighbor-joining, maximum likelihood algorithm, and Bayesian inference. These data show that any two CRs within individuals were more genetically distant from orthologous genes in different individuals within the same subspecies. This suggests independent evolution of the two mtCRs within each P. megacephalum subspecies. Reconstruction of separate phylogenetic trees using different CR components (TAS, CD, CSB, and VNTRs suggested the role of recombination in the evolution of duplicate CRs. Consequently, recombination events were detected using RDP software with break points at ≈290 bp and ≈1,080 bp. Based on these results, we hypothesize that duplicate CRs in P. megacephalum originated from heterological ancestral recombination of mtDNA. Subsequent recombination could have resulted in homogenization during independent evolutionary events, thus maintaining the functions of duplicate CRs in the mtDNA of P

  7. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis......Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...

  8. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  9. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  10. Job descriptions made easy.

    Science.gov (United States)

    Miller, Larry

    2014-01-01

    The act of writing a job description can be a daunting and difficult task for many managers. This article focuses on the key concepts of What, How, and Measureable Results as they relate to an employee's job duties. When the answers to these three elements are articulated, they define the core responsibilities of any job that form the basis for an effective job description.

  11. Description of vegetation types

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document provides descriptions of five vegetation types found in Iowa- oak savannah, mature hardwoods, floodplain woods, scrub woods, and riparian woods. Oak...

  12. Career Path Descriptions

    CERN Document Server

    Charkiewicz, A

    2000-01-01

    Before the Career Path system, jobs were classified according to grades with general statutory definitions, guided by the "Job Catalogue" which defined 6 evaluation criteria with example illustrations in the form of "typical" job descriptions. Career Paths were given concise statutory definitions necessitating a method of description and evaluation adapted to their new wider-band salary concept. Evaluations were derived from the same 6 criteria but the typical descriptions became unusable. In 1999, a sub-group of the Standing Concertation Committee proposed a new guide for describing Career Paths, adapted to their wider career concept by expanding the 6 evaluation criteria into 9. For each criterion several levels were established tracing the expected evolution of job level profiles and personal competencies over their longer salary ranges. While providing more transparency to supervisors and staff, the Guide's official use would be by services responsible for vacancy notices, Career Path evaluations and rela...

  13. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  14. CRAC2 model description

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions.

  15. A Description Logic Primer

    CERN Document Server

    Krötzsch, Markus; Horrocks, Ian

    2012-01-01

    This paper provides a self-contained first introduction to description logics (DLs). The main concepts and features are explained with examples before syntax and semantics of the DL SROIQ are defined in detail. Additional sections review light-weight DL languages, discuss the relationship to the Web Ontology Language OWL and give pointers to further reading.

  16. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  17. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  18. RETRIEVAL EQUIPMENT DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    J. Steinhoff

    1997-08-25

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler.

  19. From description to prescription

    DEFF Research Database (Denmark)

    McQuaid, Sara Dybris

    From Description to Prescription: Politics of Recognition, Consociational Theory and the Conflict in Northern Ireland. Within academic discourses on Northern Ireland the politics of recognition and particularly the theory of consociational democracy has made a profound impact. First introduced...... politico-cultural antagonisms in Northern Ireland. However, the terms ‘consociationalism’ or ‘consociational democracy’ are wholly absent from political discourses: they are never used in any of the governmental and constitutional documents between 1969 and 2006. As such, juxtaposing academic literature...... to integration, eventually converged in authoritative academic and political discourses....

  20. Distributed multiple description coding

    CERN Document Server

    Bai, Huihui; Zhao, Yao

    2011-01-01

    This book examines distributed video coding (DVC) and multiple description coding (MDC), two novel techniques designed to address the problems of conventional image and video compression coding. Covering all fundamental concepts and core technologies, the chapters can also be read as independent and self-sufficient, describing each methodology in sufficient detail to enable readers to repeat the corresponding experiments easily. Topics and features: provides a broad overview of DVC and MDC, from the basic principles to the latest research; covers sub-sampling based MDC, quantization based MDC,

  1. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  2. Direction and Description

    Science.gov (United States)

    Ben-Menahem, Yemima

    This paper deals with the dependence of directionality in the course of events-or our claims concerning such directionality-on the modes of description we use in speaking of the events in question. I argue that criteria of similarity and individuation play a crucial role in assessments of directionality. This is an extension of Davidson's claim regarding the difference between causal and explanatory contexts. The argument is based on a characterisation of notions of necessity and contingency that differ from their modal logic counterparts on the one hand, and from causality and chance on the other. I show that some types of directionality are perfectly compatible with both determinism and indeterminism at the microscopic level, and that there is no likelihood of, or advantage to, reducing such directionality to other laws or causal processes.

  3. Symmetrical gait descriptions

    Science.gov (United States)

    Dunajewski, Adam; Dusza, Jacek J.; Rosado Muñoz, Alfredo

    2014-11-01

    The article presents a proposal for the description of human gait as a periodic and symmetric process. Firstly, the data for researches was obtained in the Laboratory of Group SATI in the School of Engineering of University of Valencia. Then, the periodical model - Mean Double Step (MDS) was made. Finally, on the basis of MDS, the symmetrical models - Left Mean Double Step and Right Mean Double Step (LMDS and RMDS) could be created. The method of various functional extensions was used. Symmetrical gait models can be used to calculate the coefficients of asymmetry at any time or phase of the gait. In this way it is possible to create asymmetry, function which better describes human gait dysfunction. The paper also describes an algorithm for calculating symmetric models, and shows exemplary results based on the experimental data.

  4. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  5. Trusting Description: Authenticity, Accountability, and Archival Description Standards

    Science.gov (United States)

    MacNeil, Heather

    2009-01-01

    It has been suggested that one of the purposes of archival description is to establish grounds for presuming the authenticity of the records being described. The article examines the implications of this statement by examining the relationship between and among authenticity, archival description, and archival accountability, assessing how this…

  6. Multiple Descriptions Using Sparse Decompositions

    DEFF Research Database (Denmark)

    Jensen, Tobias Lindstrøm; Østergaard, Jan; Dahl, Joachim;

    2010-01-01

    and furthermore are able to refine each other. In this paper, we form descriptions using convex optimization with l1-norm minimization and Euclidean distortion constraints on the reconstructions and show that with this method we can obtain non-trivial descriptions. We give an algorithm based on recently developed...

  7. Combine harvester : threshing process description

    DEFF Research Database (Denmark)

    Carton, Denis Manuel

    1999-01-01

    The harvest consists of two mains opertions : cutting the crop and extracting the grain.This report is a general description of a model for this mechanism.......The harvest consists of two mains opertions : cutting the crop and extracting the grain.This report is a general description of a model for this mechanism....

  8. Software Architecture Description and UML

    NARCIS (Netherlands)

    Avgeriou, Paris; Guelfi, Nicolas; Medvidovic, Nenad

    2005-01-01

    The description of software architectures has always been concerned with the definition of the appropriate languages for designing the various architectural artifacts. Over the past ten years, formal or less formal Architecture Description Languages (ADLs) and supporting methods and tools have been

  9. Quantum mechanical description of waveguides

    Institute of Scientific and Technical Information of China (English)

    Wang Zhi-Yong; Xiong Cai-Dong; He Bing

    2008-01-01

    Applying the spinor representation of the electromagnetic field,this paper present a quantum-mechanical description of waveguides.As an example of application,a potential qubit generated by photon tunnelling is discussed.

  10. Description of dose response curve

    OpenAIRE

    Al-Samarai, Firas

    2011-01-01

    The book included several methods to estimate LD50, in addition to explain how to use several programs to estimate LD50. Moreover the book illustrate the description of the dose response curves. Firas Al-Samarai

  11. Back Bay Wilderness area description

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a description of the lands located within the Back Bay National Wildlife Refuge. Within these lands, it designates which area is suitable for...

  12. Detector Description Framework in LHCb

    CERN Document Server

    Ponce, Sébastien

    2003-01-01

    The Gaudi architecture and framework are designed to provide a common infrastructure and environment for simulation, filtering, reconstruction and analysis applications. In this context, a Detector Description Service was developed in LHCb in order to also provide easy and coherent access to the description of the experimental apparatus. This service centralizes every information about the detector, including geometry, materials, alignment, calibration, structure and controls. From the proof of concept given by the first functional implementation of this service late 2000, the Detector Description Service has grown and has become one of the major components of the LHCb software, shared among all applications, including simulation, reconstruction, analysis and visualization. We describe here the full and functional implementation of the service. We stress the easiness of customization and extension of the detector description by the user, on the seamless integration with condition databases in order to handle ...

  13. The Fundamental Scale of Descriptions

    CERN Document Server

    Febres, Gerardo

    2014-01-01

    The complexity of a system description is a function of the entropy of its symbolic description. Prior to computing the entropy of the system description, an observation scale has to be assumed. In natural language texts, typical scales are binary, characters, and words. However, considering languages as structures built around certain preconceived set of symbols, like words or characters, is only a presumption. This study depicts the notion of the Description Fundamental Scale as a set of symbols which serves to analyze the essence a language structure. The concept of Fundamental Scale is tested using English and MIDI music texts by means of an algorithm developed to search for a set of symbols, which minimizes the system observed entropy, and therefore best expresses the fundamental scale of the language employed. Test results show that it is possible to find the Fundamental Scale of some languages. The concept of Fundamental Scale, and the method for its determination, emerges as an interesting tool to fac...

  14. Lagrangian description of nonlinear chromatography

    Institute of Scientific and Technical Information of China (English)

    LIANG Heng; LIU Xiaolong

    2004-01-01

    Under the framework of non-equilibrium thermodynamic separation theory (NTST), Local Lagrangian approach (LLA) was proposed to deal with the essential issues of the convection and diffusion (shock waves) phenomena in nonlinear chromatography with recursion equations based on the three basic theorems, Lagrangian description, continuity axiom and local equilibrium assumption (LEA). This approach remarkably distinguished from the system of contemporary chromatographic theories (Eulerian description-partial differential equations), and can felicitously match modern cybernetics.

  15. Auteur Description: From the Director's Creative Vision to Audio Description

    Science.gov (United States)

    Szarkowska, Agnieszka

    2013-01-01

    In this report, the author follows the suggestion that a film director's creative vision should be incorporated into Audio description (AD), a major technique for making films, theater performances, operas, and other events accessible to people who are blind or have low vision. The author presents a new type of AD for auteur and artistic films:…

  16. Memory materials: a unifying description

    Directory of Open Access Journals (Sweden)

    Massimiliano Di Ventra

    2011-12-01

    Full Text Available There are so many materials properties leading to memory that a unifying description seems impossible. However, it is easy to show that the majority of two-terminal electronic devices based on memory materials and systems, when subject to time-dependent perturbations, behave simply as, or as a combination of, memristors, memcapacitors, and meminductors; namely non-linear circuit elements with memory. This unifying description opens up new venues for digital and analog applications ranging from information storage to biologically-inspired circuits. In this review, interesting research opportunities that emerge from this new perspective will be outlined.

  17. Exclusion Statistics: a Generalized Description

    Institute of Scientific and Technical Information of China (English)

    WANG Bao-Quan; WANG Yu-Peng

    2005-01-01

    @@ By constructing the fused-particle representation of the free boson gas, we propose a description of the exclusion statistics which allows us to connect the Bose-Einstein statistics and the Fermi-Dirac statistics smoothly.With an proper choice of the exclusion factors γl, Hadane-Wu's fractional statistics is retrieved in this representation.

  18. Task descriptions versus use cases

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    project: Acquire a new system to support a hotline. Among the 15 replies, eight used traditional use cases that specified a dialog between user and system. Seven used a related technique, task description, which specified the customer’s needs without specifying a dialog. It also allowed the analyst...

  19. Use cases versus task descriptions

    DEFF Research Database (Denmark)

    Lauesen, Søren; Kuhail, Mohammad Amin

    2011-01-01

    to specify require-ments for the same project: Acquire a new system to support a hotline. [Princi-pal ideas/results] Among the 15 replies, eight used traditional use cases that specified a dialog between users and system. Seven used a related technique, task description, which specified the customer's needs...

  20. The Geometry Description Markup Language

    Institute of Scientific and Technical Information of China (English)

    RadovanChytracek

    2001-01-01

    Currently,a lot of effort is being put on designing complex detectors.A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier.A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment.However,no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files,source code (C/C++/FORTRAN),to XML and database solutions.The XML(Extensible Markup Language)has proven to provide an interesting approach for describing detector geometries,with several different but incompatible XML-based solutions existing.Therefore,interoperability and geometry data exchange among different frameworks is not possible at present.This article introduces a markup language for geometry descriptions.Its aim is to define a common approach for sharing and exchanging of geometry description data.Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML.

  1. Turbulent Dissipation Challenge -- Problem Description

    CERN Document Server

    Parashar, Tulasi N; Wicks, Robert; Karimabadi, Homa; Chandran, S Peter Gary Benjamin; Matthaeus, William H

    2014-01-01

    The goal of this document is to present a detailed description of the goals, simulation setup and diagnostics for the Turbulent Dissipation Challenge $($http://arxiv.org/abs/1303.0204$)$ as discussed in the Solar Heliospheric and INterplanetary Environment $($SHINE$)$ 2013 workshop, American Geophysical Union Fall Meeting 2013 and the accompanying antenna meeting in Berkeley.

  2. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics. -- Pa...

  3. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  4. Personality: Description, Classification and Evaluation

    OpenAIRE

    Ibrahim Taymur; M. Hakan TURKCAPAR

    2012-01-01

    Many descriptions and classifications of personality have been made to understand and acknowledge human being through out the history. During the developmental process of psychiatry, almost every school defined and assessed personality regarding to their own perspective. As DSM (Diagnostical and Statistical Manual of Mental Disorders) and ICD (International Classification of Diseases) being available to common usage, scientists conducted studies to set a common terminology for personality. Ca...

  5. Personality: Description, Classification and Evaluation

    Directory of Open Access Journals (Sweden)

    Ibrahim Taymur

    2012-06-01

    Full Text Available Many descriptions and classifications of personality have been made to understand and acknowledge human being through out the history. During the developmental process of psychiatry, almost every school defined and assessed personality regarding to their own perspective. As DSM (Diagnostical and Statistical Manual of Mental Disorders and ICD (International Classification of Diseases being available to common usage, scientists conducted studies to set a common terminology for personality. Categorical and dimensional approaches are the most fundamentally different assessment strategies in the research and clinical aspects about personality. While categorical approach views the personality as dichotomies which consists of different groups, dimensional approach aims to describe the personality on the basis of dimensions, thus suggests that the personality is a structure formed by definite dimensions. Several advantages and disadvantages can be noticed when descriptions of personality and tools for the evaluation of personality are reviewed. When the section making suggestions about personality disorder in DSM-5 is evaluated, it is seen that it aims to restructure the personality disorder diagnostic group according to new findings and critiques. In this article, the description of personality throughout the history, dimensional, categorical and cognitive approaches to personality, the features of the tools that are used to assess and measure the personality are reviewed.

  6. Multiple descriptions based wavelet image coding

    Institute of Scientific and Technical Information of China (English)

    陈海林; 杨宇航

    2004-01-01

    We present a simple and efficient scheme that combines multiple descriptions coding with wavelet transform under JPEG2000 image coding architecture. To reduce packet losses, controlled amounts of redundancy are added to the wavelet transform coefficients to produce multiple descriptions of wavelet coefficients during the compression process to produce multiple descriptions bit-stream of a compressed image. Even if areceiver gets only parts of descriptions (other descriptions being lost), it can still reconstruct image with acceptable quality. Specifically, the scheme uses not only high-performance wavelet transform to improve compression efficiency, but also multiple descriptions technique to enhance the robustness of the compressed image that is transmitted through unreliable network channels.

  7. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  8. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  9. College Readiness -- A Simple Description

    Directory of Open Access Journals (Sweden)

    Jerome Dancis

    2012-01-01

    Full Text Available To survive academically the first year of college, students basically need the three Rs, Reading, wRiting and aRithmetic, albeit all on high school levels. No Statistics needed.Reading means reading with understanding the expository and descriptive text in science and social studies textbooks, not literature. This includes following written directions. Writing means writing a coherent summary of each chapter in the science and social studies textbooks, and relating the chapter to material previously studied. Arithmetic means Arithmetic, including fractions, decimals, percents, measurement and multi-step Arithmetic word problems, along with “generalized” Arithmetic, better known as Algebra.

  10. Inflationary universe in fluid description

    CERN Document Server

    Bamba, Kazuharu

    2016-01-01

    We investigate a fluid description of inflationary cosmology. It is shown that the three observables of the inflationary universe: the spectral index of the curvature perturbations, the tensor-to-scalar ratio of the density perturbations, and the running of the spectral index, can be compatible with the Planck analysis. In addition, we reconstruct the equation of state (EoS) for a fluid from the spectral index of the curvature perturbations consistent with the Planck results. We explicitly demonstrate that the universe can gracefully exit from inflation in the reconstructed fluid models. Furthermore, we explore the singular inflation for a fluid model.

  11. IUE/IRA system description

    Science.gov (United States)

    Jennings, J.

    1977-01-01

    The IUE/IRA rate sensor system designed to meet the requirements of the International Ultraviolet Explorer spacecraft mission is described. The system consists of the sensor unit containing six rate sensor modules and the electronic control unit containing the rate sensor support electronics and the command/control circuitry. The inertial reference assembly formed by the combined units will provide spacecraft rate information for use in the stabilization and control system. The system is described in terms of functional description, operation redundancy performance, mechanical interface, and electrical interface. Test data obtained from the flight unit are summarized.

  12. 40 CFR 123.22 - Program description.

    Science.gov (United States)

    2010-07-01

    ... employees. The State need not submit complete job descriptions for every employee carrying out the State... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Program description. 123.22 Section... PROGRAM REQUIREMENTS State Program Submissions § 123.22 Program description. Any State that seeks...

  13. Addressing the Language Description Deficit

    Directory of Open Access Journals (Sweden)

    M. Ali Bolgiin

    2010-01-01

    Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

  14. Model Experiments and Model Descriptions

    Science.gov (United States)

    Jackman, Charles H.; Ko, Malcolm K. W.; Weisenstein, Debra; Scott, Courtney J.; Shia, Run-Lie; Rodriguez, Jose; Sze, N. D.; Vohralik, Peter; Randeniya, Lakshman; Plumb, Ian

    1999-01-01

    The Second Workshop on Stratospheric Models and Measurements Workshop (M&M II) is the continuation of the effort previously started in the first Workshop (M&M I, Prather and Remsberg [1993]) held in 1992. As originally stated, the aim of M&M is to provide a foundation for establishing the credibility of stratospheric models used in environmental assessments of the ozone response to chlorofluorocarbons, aircraft emissions, and other climate-chemistry interactions. To accomplish this, a set of measurements of the present day atmosphere was selected. The intent was that successful simulations of the set of measurements should become the prerequisite for the acceptance of these models as having a reliable prediction for future ozone behavior. This section is divided into two: model experiment and model descriptions. In the model experiment, participant were given the charge to design a number of experiments that would use observations to test whether models are using the correct mechanisms to simulate the distributions of ozone and other trace gases in the atmosphere. The purpose is closely tied to the needs to reduce the uncertainties in the model predicted responses of stratospheric ozone to perturbations. The specifications for the experiments were sent out to the modeling community in June 1997. Twenty eight modeling groups responded to the requests for input. The first part of this section discusses the different modeling group, along with the experiments performed. Part two of this section, gives brief descriptions of each model as provided by the individual modeling groups.

  15. A description of Ternate Malay

    Directory of Open Access Journals (Sweden)

    Betty Litamahuputty

    2012-10-01

    Full Text Available Ternate Malay is a local variety of Malay in Ternate, a small island in the Maluku Utara province in eastern Indonesia. The majority of speakers live in Ternate town, where it serves as mother tongue as well as a means of communication between people of various ethnic and linguistic backgrounds. In the last few decades there is a growing scholarly interest in local Malay varieties, particularly in the eastern part of Indonesia. This article is a short description of Ternate Malay based on the idea that words in Ternate Malay receive their meaning in the combination with other words and that the linguistic context as well as the non-linguistic situation in which they occur, determine the most suitable interpretation of utterances. It is shown how certain words facilitate the determination of the interpretation.

  16. Theory buried under heavy description

    Directory of Open Access Journals (Sweden)

    Vivian B. Martin Ph.D.

    2010-12-01

    Full Text Available In journalism when a reporter puts the main news or point of the story deep down in the text, we say she’s buried the lead, the lead being the main point of the story and usually the first paragraph. In Children in Genocide: extreme traumatization and affect regulation, psychoanalyst Suzanne Kaplan buries her theory. Her study of the after effects of trauma among Holocaust survivors who were children during their persecution and survivors of atrocities during the Rwandan atrocities of the 1990s, is filled with highly descriptive material from the many interviews that serve as data. An interesting grounded theory is peeking out from under all the disciplinary discourse and historical background one must read through to get to what grounded theory readers will consider the juicy parts: concepts on affect regulation in trauma survivors.

  17. High Luminosity LHC Project Description

    CERN Document Server

    Apollinari, Giorgio; Rossi, Lucio

    2014-01-01

    The High Luminosity LHC (HL-LHC) is a novel configuration of the Large Hadron Collider, aiming at increasing the luminosity by a factor five or more above the nominal LHC design, to allow increasing the integrated luminosity, in the high luminosity experiments ATLAS and CMS, from the 300 fb-1 of the LHC original design up to 3000 fb-1 or more. This paper contains a short description of the main machine parameters and of the main equipment that need to be developed and installed. The preliminary cost evaluation and the time plan are presented, too. Finally, the international collaboration that is supporting the project, the governance and the project structure are discussed, too.

  18. Do children prefer mentalistic descriptions?

    Science.gov (United States)

    Dore, Rebecca A; Lillard, Angeline S

    2014-01-01

    Against a long tradition of childhood realism (Piaget, 1929), A. S. Lillard and J. H. Flavell (1990) found that 3-year-olds prefer to characterize people by their mental states (beliefs, desires, emotions) than by their visible behaviors. In this exploratory study, we extend this finding to a new cohort of 3-year-olds, examine how these preferences change from 3-4 years, and explore relationships with theory of mind and parental mind-mindedness. The results showed a developmental change and a possible cohort difference: at 3 years, children in the sample preferred behavioral descriptions, although by 4 years of age, they preferred mentalistic ones. Interestingly, mentalistic preferences were unrelated to theory of mind or parental mind-mindedness, concurrently or over time. Perspective-taking skills at 3 years, however, predicted an increase in mentalistic responses from 3 years to 4 years. Possible explanations for each finding are discussed.

  19. Multiple descriptions based wavelet image coding

    Institute of Scientific and Technical Information of China (English)

    CHEN Hai-lin(陈海林); YANG Yu-hang(杨宇航)

    2004-01-01

    We present a simple and efficient scheme that combines multiple descriptions coding with wavelet transform under JPEG2000 image coding architecture. To reduce packet losses, controlled amounts of redundancy are added to the wavelet transform coefficients to produce multiple descriptions of wavelet coefficients during the compression process to produce multiple descriptions bit-stream of a compressed image. Even if a receiver gets only parts of descriptions (other descriptions being lost), it can still reconstruct image with acceptable quality. Specifically, the scheme uses not only high-performance wavelet transform to improve compression efficiency, but also multiple descriptions technique to enhance the robustness of the compressed image that is transmitted through unreliable network channels.

  20. Probabilistic description of traffic flow

    Science.gov (United States)

    Mahnke, R.; Kaupužs, J.; Lubashevsky, I.

    2005-03-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given.

  1. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  2. Content of system design descriptions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.

  3. On the tomographic description of classical fields

    CERN Document Server

    Ibort, A; Man'ko, V I; Marmo, G; Simoni, A; Sudarshan, E C G; Ventriglia, F

    2012-01-01

    After a general description of the tomographic picture for classical systems, a tomographic description of free classical scalar fields is proposed both in a finite cavity and the continuum. The tomographic description is constructed in analogy with the classical tomographic picture of an ensemble of harmonic oscillators. The tomograms of a number of relevant states such as the canonical distribution, the classical counterpart of quantum coherent states and a new family of so called Gauss--Laguerre states, are discussed. Finally the Liouville equation for field states is described in the tomographic picture offering an alternative description of the dynamics of the system that can be extended naturally to other fields.

  4. 7 CFR 52.801 - Product description.

    Science.gov (United States)

    2010-01-01

    ... United States Standards for Grades of Frozen Red Tart Pitted Cherries Product Description and Grades § 52.801 Product description. Frozen red tart pitted cherries is the food prepared from properly matured cherries of the domestic (Prunus cerasus) red sour varietal group which have been washed, pitted,...

  5. Advances in China's Oil Reservoir Description Technique

    Institute of Scientific and Technical Information of China (English)

    Mu Longxin; Huang Shiyan; Jia Ailin; Rong Jiashu

    1997-01-01

    @@ Oil reservoir description in China has undergone rapid development in recent years. Extensive research carried out at various oilfields and petroleum universities has resulted in the formulation of comprehensive oil reservoir description techniques and methods uniquely suited to the various development phases of China's continental facies. The new techniques have the following characteristics:

  6. 40 CFR 145.23 - Program description.

    Science.gov (United States)

    2010-07-01

    ..., a description of the procedure for reviewing the wells for compliance with applicable monitoring... description of and a schedule for the State's plan to identify and delineate other sensitive ground water areas. States should consider geologic and hydrogeologic settings, ground water flow and...

  7. A Simplified Description of Fuzzy TOPSIS

    CERN Document Server

    Sodhi, Balwinder

    2012-01-01

    A simplified description of Fuzzy TOPSIS (Technique for Order Preference by Similarity to Ideal Situation) is presented. We have adapted the TOPSIS description from existing Fuzzy theory literature and distilled the bare minimum concepts required for understanding and applying TOPSIS. An example has been worked out to illustrate the application of TOPSIS for a multi-criteria group decision making scenario.

  8. Influence of behaviorism to American descriptive linguistics

    Institute of Scientific and Technical Information of China (English)

    牟莹莹

    2015-01-01

    This paper discusses the influence of the behaviorism on American descriptive linguistics through the analysis of the tenets of behaviorism and the Bloomfield’s stimulus-response theory and tries to give an fair comment on the influence of the behaviorism on American descriptive linguistics.

  9. 34 CFR 675.32 - Program description.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Program description. 675.32 Section 675.32 Education..., DEPARTMENT OF EDUCATION FEDERAL WORK-STUDY PROGRAMS Job Location and Development Program § 675.32 Program description. An institution may expend up to the lesser of $50,000 or 10 percent of its FWS allocation...

  10. Indexing Images: Testing an Image Description Template.

    Science.gov (United States)

    Jorgensen, Corinne

    1996-01-01

    A template for pictorial image description to be used by novice image searchers in recording their descriptions of images was tested; image attribute classes derived in previous research were used to model the template. Results indicated that users may need training and/or more guidance to correctly assign descriptors to higher-level classes.…

  11. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  12. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  13. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address.

  14. Discussion on English Vocabulary and Description

    Institute of Scientific and Technical Information of China (English)

    Shen Lan; Zhang Shiying

    2013-01-01

    Compared with the study of Grammar, syntax, the description on vocabulary is comparatively slower than them. The related theories of vocabulary description have fast developed since the 1980s and 1990s have experienced a growing interest in vocabulary learning and teaching----The vocabulary size, text coverage, word list, meaning of vocabulary in context, and collocation have been discovered and described, which helped new insights in arrange of different research fields have all added to our understanding of vocabulary development. Vocabulary acquisition research, based on vocabulary description, has established itself as a central research focus for language acquisition researchers and contributed to the focus of practical teaching and learning in English.

  15. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  16. Crosswalking EAD: Collaboration in Archival Description

    Directory of Open Access Journals (Sweden)

    Amy McCrory

    2005-09-01

    Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

  17. A Formal Description of Problem Frames

    Directory of Open Access Journals (Sweden)

    Souleymane KOUSSOUBE

    2014-03-01

    Full Text Available Michael Jackson defines a Problem Frame as a mean to describe and classify software development problems. The initial description of problem Frames is essentially graphical. A weakness of this proposal is the lack of formal specification allowing efficient reasoning tools. This paper deals with Problem Frames’ formal specification with Description Logics. We first propose a formal terminology of Problem Frames leading to the specification of a Problem Frames’ TBOX and a specific problem’s ABOX. The Description Logics inference tools can then be used to decompose multi frame problems or to fix a particular problem into a Problem Frame.

  18. Scripps Sediment Description File- OCSEAP Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  19. VIRTUAL INSTRUMENT SYSTEM SOFTWARE ARCHITECTURE DESCRIPTION LANGUAGE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In software engineering, an architecture description language (ADL) is intended to aid designers in defining software architectures in terms of abstractions that they find useful, and in making a smooth transi- tion to code. Based on ADL, the concept and models of the Virtual instrunent system Software architecture Description Language (VSDL) is provided in this paper. The VSDL put forward provides a new method for vir- tual instrunent system's application design and development by describing the virtual instrument system soft- ware architecture effectively. In this paper, the model description、component description and line description are analyzed in detail, and the structure language based on the model is also provided. VSDL provides a smooth interface to graphic software platform, and has been applied to many virtual instrument systems' inte- gration and already yielded good results both in technology and economy.

  20. Developing Your Employee Handbook: Job Descriptions.

    Science.gov (United States)

    Perreault, Joe

    1988-01-01

    A job description is a brief document that conveys to employees the importance of their jobs to the overall success of the day-care center. If properly written, it can contribute to effective employee motivation and supervision. (RJC)

  1. SIO Ferromanganese Nodule Description file - IDOE Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

  2. Mining skeletal phenotype descriptions from scientific literature.

    Directory of Open Access Journals (Sweden)

    Tudor Groza

    Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

  3. 7 CFR 52.3181 - Product description.

    Science.gov (United States)

    2010-01-01

    ... PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dried Prunes Product Description, Varietal... matured prune plums from which the greater portion of moisture is removed by drying. The dried prunes...

  4. A Dynamic Service Description for Mobile Environments

    OpenAIRE

    Verma, Rohit; Srivastava, Abhishek

    2016-01-01

    With the increasing processing capability of mobile platforms and advancements in Internet of Things, modern mobile devices have shown a favorable prospect for on-the-go service provisioning. However, there is much to be done to realize this. A detailed, dynamic, and lightweight service description is an important requirement for automatic and efficient discovery, selection, and subsequent provisioning of services over mobile devices. Traditional approaches for service description are usually...

  5. The maximum entropy technique. System's statistical description

    CERN Document Server

    Belashev, B Z

    2002-01-01

    The maximum entropy technique (MENT) is applied for searching the distribution functions of physical values. MENT takes into consideration the demand of maximum entropy, the characteristics of the system and the connection conditions, naturally. It is allowed to apply MENT for statistical description of closed and open systems. The examples in which MENT had been used for the description of the equilibrium and nonequilibrium states and the states far from the thermodynamical equilibrium are considered

  6. Oak Ridge TNS Program: system description manual

    Energy Technology Data Exchange (ETDEWEB)

    Reid, R.L.; Becraft, W.R.; Brown, T.G.; Peng, Y.K.M.; Sardella, C.; Shannon, T.E.; Steiner, D.; Wells, W.M.; Wiseman, G.W.

    1979-05-01

    This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

  7. Audio description as an accessibility enhancer

    OpenAIRE

    Martins, Cláudia Susana Nunes

    2012-01-01

    Audio description for the blind and visually-impaired has been around since people have described what is seen. Throughout time, it has evolved and developed in different contexts, starting with daily life, moving into the cinema and television, then across other performing arts, museums and galleries, historical sites and public places. Audio description is above all an issue of accessibility and of providing visually-impaired people with the same rights to have access to culture, e...

  8. Effective Conformal Descriptions of Black Hole Entropy

    Directory of Open Access Journals (Sweden)

    Steven Carlip

    2011-07-01

    Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

  9. Description scheme for video editing work

    Science.gov (United States)

    Ruiloba, Rosa I.; Joly, Philippe

    2001-03-01

    This article presents a Description Scheme (DS) to describe the audio-visual documents from the video editing work point of view. This DS is based on edition techniques used in the video edition domain. The main objective of this DS is to provide a complete, modular and extensible description of the structure of the video documents based on editing process. This VideoEditing DS is generic in the sense that it may be used in a large number of applications such as video document indexing and analysis, description of Edit Decision List and elaboration of editing patterns. It is based on accurate and complete definitions of shots and transition effects required for video document analysis applications. The VideoEditing DS allows three levels of description : analytic, synthetic and semantic. In the DS, the higher (resp. the lower) is the element of description, the more analytic (resp. synthetic) is the information. %Phil This DS allows describing the editing work made by editing boards, using more detailed descriptors of Shots and Transition DSs. These elements are provided to define editing patterns that allow several possible reconstructions of movies depending on, for example, the target audience. A part of the video description made with this DS may be automatically produced by the video to shots segmentation algorithms (analytic DSs ) or by editing software, at the same time the edition work is made. This DS gives an answer to the needs related to the exchange of editing work descriptions between editing softwares. At the same time, the same DS provide an analytic description of editing work which is complementary to existing standards for Edit Decision Lists like SMPTE or AAF.

  10. 41 CFR 101-29.209 - Purchase description.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Purchase description. 101... DESCRIPTIONS 29.2-Definitions § 101-29.209 Purchase description. A purchase description is any informal product description prepared for one-time use only or for small purchases when issuance of a formal...

  11. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  12. Discussion on English Vocabulary and Description

    Institute of Scientific and Technical Information of China (English)

    沈岚; 代显华

    2013-01-01

      Compared with the study of Grammar, syntax, the description on vocabulary is comparatively slower than them. The related theories of vocabulary description have fast developed since the 1980s and 1990s have experienced a growing interest in vocabulary learning and teaching----The vocabulary size, text coverage, word list, meaning of vocabulary in context, and collocation have been discovered and described, which helped new insights in arrange of different research fields have all added to our understanding of vocabulary development. Vocabulary acquisition research, based on vocabulary description, has established itself as a central research focus for language acquisition researchers and contributed to the focus of practical teaching and learning in College English.

  13. Microcanonical Description of (Micro Black Holes

    Directory of Open Access Journals (Sweden)

    Benjamin Harms

    2011-02-01

    Full Text Available The microcanonical ensemble is the proper ensemble to describe black holes which are not in thermodynamic equilibrium, such as radiating black holes. This choice of ensemble eliminates the problems, e.g., negative specific heat (not allowed in the canonical ensemble and loss of unitarity, encountered when the canonical ensemble is used. In this review we present an overview of the weaknesses of the standard thermodynamic description of black holes and show how the microcanonical approach can provide a consistent description of black holes and their Hawking radiation at all energy scales. Our approach is based on viewing the horizon area as yielding the ensemble density at fixed system energy. We then compare the decay rates of black holes in the two different pictures. Our description is particularly relevant for the analysis of micro-black holes whose existenceis predicted in models with extra-spatial dimensions.

  14. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  15. Business Education Course Descriptions. Course Descriptions for the Improvement of Business Education.

    Science.gov (United States)

    Oklahoma State Dept. of Education, Oklahoma City.

    Course descriptions are provided for 22 courses in the area of business education. Each description contains the following information: purpose, course objectives, outline of course content, list of optional topics, recommended types of evaluation, prerequisites, areas of interest, and curriculum sequence (grade level at which it should be…

  16. Description of the RDCDS Meteorological Component

    Energy Technology Data Exchange (ETDEWEB)

    Pekour, Mikhail S.; Berg, Larry K.

    2007-10-01

    This report provides a detailed description of the Rapidly Deployable Chemical Defense System (RDCDS) Meteorological Component. The Meteorological Component includes four surface meteorological stations, miniSODAR, laptop computers, and communications equipment. This report describes the equipment that is used, explains the operation of the network, and gives instructions for setting up the Component and replacing defective parts. A detailed description of operation and use of the individual sensors, including the data loggers is not covered in the current document, and the interested reader should refer to the manufacturer’s documentation.

  17. The first accurate description of an aurora

    Science.gov (United States)

    Schröder, Wilfried

    2006-12-01

    As technology has advanced, the scientific study of auroral phenomena has increased by leaps and bounds. A look back at the earliest descriptions of aurorae offers an interesting look into how medieval scholars viewed the subjects that we study.Although there are earlier fragmentary references in the literature, the first accurate description of the aurora borealis appears to be that published by the German Catholic scholar Konrad von Megenberg (1309-1374) in his book Das Buch der Natur (The Book of Nature). The book was written between 1349 and 1350.

  18. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  19. 7 CFR 621.30 - Description.

    Science.gov (United States)

    2010-01-01

    ..., development, use, and disposal of water; for flood control; for the conservation and proper use of land; and... 7 Agriculture 6 2010-01-01 2010-01-01 false Description. 621.30 Section 621.30 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT...

  20. Descriptive and Functional Classifications of Drug Abusers

    Science.gov (United States)

    Carlin, Albert S.; Stauss, Fred F.

    1977-01-01

    Polydrug (non-opiate-drug) abusers have previously been classified by a variety of typologies that can be characterized as either descriptive, functional, or a combination of both. This investigation proposes two objective scoring systems that classify polydrug users on a streetwise/straight dimension and on a self-medication/recreational-use…

  1. Challenges in writing ecological site descriptions

    Science.gov (United States)

    The Natural Resources Conservation Service (NRCS) adopted the Ecological Site Description (ESD) concept in 1997. The State and Transition Model (STM) is used to describe vegetation dynamics and is an integral component of ESDs that meet users needs. NRCS is currently developing ESDs for much of the ...

  2. 7 CFR 52.1841 - Product description.

    Science.gov (United States)

    2010-01-01

    ... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Processed Raisins 1 § 52.1841 Product description. Processed Raisins are dried grapes of the Vinifera varieties, such as Thompson...

  3. Microprocessor Design Using Hardware Description Language

    Science.gov (United States)

    Mita, Rosario; Palumbo, Gaetano

    2008-01-01

    The following paper has been conceived to deal with the contents of some lectures aimed at enhancing courses on digital electronic, microelectronic or VLSI systems. Those lectures show how to use a hardware description language (HDL), such as the VHDL, to specify, design and verify a custom microprocessor. The general goal of this work is to teach…

  4. Multiple descriptions for packetized predictive control

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2016-01-01

    In this paper, we propose to use multiple descriptions (MDs) to achieve a high degree of robustness towards random packet delays and erasures in networked control systems. In particular, we consider the scenario, where a data-rate limited channel is located between the controller and the plant...

  5. Network architecture functional description and design

    Energy Technology Data Exchange (ETDEWEB)

    Stans, L.; Bencoe, M.; Brown, D.; Kelly, S.; Pierson, L.; Schaldach, C.

    1989-05-25

    This report provides a top level functional description and design for the development and implementation of the central network to support the next generation of SNL, Albuquerque supercomputer in a UNIX{reg sign} environment. It describes the network functions and provides an architecture and topology.

  6. Semantic description and recognition of patterns

    Institute of Scientific and Technical Information of China (English)

    杨立; 戴汝为

    1996-01-01

    An algebraic semantic approach for the description and recognition of patterns is presented.Specifically,patterns are assumed as algebraic structures,and semantic constraints are given in the form of equational specifications.By such an idea,to recogniz a pattern is to check the validity of an equational conjecture by term rewriting.Such an approach is demonstrated through examples.

  7. On Gauge Invariant Descriptions of Gluon Polarization

    CERN Document Server

    Guo, Zhi-Qiang

    2012-01-01

    We propose methods to construct gauge invariant decompositions of nucleon spin, especially gauge invariant descriptions of gluon polarization. We show that gauge invariant decompositions of nucleon spin can be derived naturally from the conserved current of a generalized Lorentzian transformation by Noether theorem. We also examine the problem of gauge dependence with a gauge invariant extension of the Chern-Simons current.

  8. Descriptive data of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3. (author)

  9. Petri Nets and Semantics of System Descriptions

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    1982-01-01

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: Languages based on nets. The problem of time in nets. Nets and related models. Nets and formal semantics. Parallel program...

  10. Automatic TLI recognition system, general description

    Energy Technology Data Exchange (ETDEWEB)

    Lassahn, G.D.

    1997-02-01

    This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.

  11. Descriptive data of JENDL-3.3

    CERN Document Server

    Shibata, K

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3.

  12. 45 CFR 1309.31 - Site description.

    Science.gov (United States)

    2010-10-01

    ... PROGRAM HEAD START FACILITIES PURCHASE, MAJOR RENOVATION AND CONSTRUCTION Modular Units § 1309.31 Site description. (a) An application for the purchase or approval of a continuing purchase of a modular unit pursuant to § 1309.2 must state specifically where the modular unit is or will be installed, and...

  13. 24 CFR 92.61 - Program description.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Program description. 92.61 Section 92.61 Housing and Urban Development Office of the Secretary, Department of Housing and Urban... requirements for affirmative marketing, and establishing and overseeing a minority and women business...

  14. 7 CFR 52.3751 - Product description.

    Science.gov (United States)

    2010-01-01

    ... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER..., Types, Styles, and Grades § 52.3751 Product description. Canned ripe olives are prepared from properly... as “tree-ripened” or “home-cured” are not covered by the standards in this subpart....

  15. Encoded Archival Description as a Halfway Technology

    Science.gov (United States)

    Dow, Elizabeth H.

    2009-01-01

    In the mid 1990s, Encoded Archival Description (EAD) appeared as a revolutionary technology for publishing archival finding aids on the Web. The author explores whether or not, given the advent of Web 2.0, the archival community should abandon EAD and look for something to replace it. (Contains 18 notes.)

  16. A DESCRIPTIVE INDONESIAN GRAMMAR--PRELIMINARY EDITION.

    Science.gov (United States)

    DYEN, ISIDORE

    THIS PRELIMINARY EDITION COMPRISES A DESCRIPTIVE GRAMMAR OF INDONESIAN (BAHASA INDONESIA), THE OFFICIAL LANGUAGE OF THE REPUBLIC OF INDONESIA. THE THREE SECTIONS--PHONOLOGY, SYNTAX, AND MORPHOLOGY--PRESENT A COMPREHENSIVE LINGUISTIC ANALYSIS OF INDONESIAN, WITH OCCASIONAL CONTRASTIVE REFERENCE TO MALAY, JAVANESE, SUNDANESE, AND SUMATRAN. THIS…

  17. Construction by description in discourse representation

    NARCIS (Netherlands)

    van Leusen, N.; Muskens, R.A.; Peregrin, J.

    2003-01-01

    This paper uses classical logic for a simultaneous description of the syntax and semantics of a fragment of English and it is argued that such an approach to natural language allows procedural aspects of linguistic theory to get a purely declarative formulation. In particular, it will be shown how c

  18. Description of a Shrew from Surinam

    NARCIS (Netherlands)

    Jentink, F.A.

    1910-01-01

    In my “Catalogue systématique des Mammifères, T. XII, 1888, p. 131” I recorded a small shrew from Surinam under the specific title pyrrhonota; till now the animal waits for a description. It seems that Shrews are very rare animals in Surinam, as I nowhere could hunt out another mentioned specimen; a

  19. 49 CFR 572.71 - General description.

    Science.gov (United States)

    2010-10-01

    ... General description. (a) The representative 6-year-old dummy consists of a drawings and specifications package that contains the following materials: (1) Technical drawings, specifications, and the parts list... component assemblies set out in Table A: Table A Assembly drawing No. Drawing title Listed on drawing...

  20. Descriptive data of JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi; Narita, Tsutomu [eds.] [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-02-01

    The second revision of JENDL-3 (JENDL-3.2) was released in 1994. The library contains evaluated neutron nuclear data for 340 nuclides which are needed for the design of fission and fusion reactors and for shielding calculation. This report presents a brief description of the evaluation method which is given in the File-1 part of JENDL-3.2. (author)

  1. Fundamental concepts of phenomenology and descriptive psychopathology

    OpenAIRE

    Debajit Gogoi

    2017-01-01

    For a better understanding of what psychiatry is all about, the importance and stronghold of phenomenology and descriptive psychopathology in psychiatry has never been overstated. Biological psychiatry has accumulated enough evidences of mental illnesses until now but that does not mean that phenomenology and psychopathology would lose its shine. Rather psychopathology and phenomenology will afoot stronger as it is the philosophy of psychiatry.

  2. 48 CFR 52.214-21 - Descriptive Literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means...

  3. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  4. A Semantic Similarity Measure for Expressive Description Logics

    CERN Document Server

    d'Amato, Claudia; Esposito, Floriana

    2009-01-01

    A totally semantic measure is presented which is able to calculate a similarity value between concept descriptions and also between concept description and individual or between individuals expressed in an expressive description logic. It is applicable on symbolic descriptions although it uses a numeric approach for the calculus. Considering that Description Logics stand as the theoretic framework for the ontological knowledge representation and reasoning, the proposed measure can be effectively used for agglomerative and divisional clustering task applied to the semantic web domain.

  5. Description of patients with carpal tunnel syndrome

    Directory of Open Access Journals (Sweden)

    Aydelián Jevey González

    2015-11-01

    Full Text Available A descriptive study of patients diagnosed with carpal tunnel syndrome was carried out at “Manuel Piti Fajardo” Teaching Polyclinic of Las Tunas, from January to December, 2008. The study was aimed at describing them clinically and epidemiologically. The sample was made up of 50 patients older than 14 years old, who were characterized according to: age, sex, individual pathological antecedents factors associated to the triggering of theirsymptomatology, as well as clinical signs and symptoms. The results were processed using the descriptive statistics by means of percentage analysis. The prevailing results were: female patients, for a 76%; 41 to 50 age group, for a 40%; antecedents of osteoarthrosis, for a 34%. The factor which triggered the onset of the symptoms was the occupation of office worker, for a 46%, while 4 patients (8% came to the consultation office with more than 6 months of symptom evolution.

  6. Wave-kinetic description of nonlinear photons

    CERN Document Server

    Marklund, M; Brodin, G; Stenflo, L

    2004-01-01

    The nonlinear interaction, due to quantum electrodynamical (QED) effects, between photons is investigated using a wave-kinetic description. Starting from a coherent wave description, we use the Wigner transform technique to obtain a set of wave-kinetic equations, the so called Wigner-Moyal equations. These equations are coupled to a background radiation fluid, whose dynamics is determined by an acoustic wave equation. In the slowly varying acoustic limit, we analyse the resulting system of kinetic equations, and show that they describe instabilities, as well as Landau-like damping. The instabilities may lead to break-up and focusing of ultra-high intensity multi-beam systems, which in conjunction with the damping may result in stationary strong field structures. The results could be of relevance for the next generation of laser-plasma systems.

  7. Fluid description for the resonant Weibel instability

    CERN Document Server

    Sarrat, M; Ghizzo, A

    2016-01-01

    We discuss a fluid model with inclusion of the complete pressure tensor dynamics for the description of Weibel type instabilities in a counterstreaming beams configuration. Differently from the case recently studied in Sarrat et al. 2016, where perturbations perpendicular to the beams were considered, here we focus only on modes propagating along the beams. Such a configuration is responsible for the growth of two kind of instabilities, the Two-Stream Instability and the Weibel instability, which in this geometry becomes "time-resonant", i.e. propagative. This fluid description agrees with the kinetic one and makes it possible e.g. to identify the transition between non-propagative and propagative Weibel modes, already evidenced by Lazar et al. 2009 as a "slope-breaking" of the growth rate, in terms of a merger of two non propagative Weibel modes.

  8. Field theory description of neutrino oscillations

    CERN Document Server

    Dvornikov, Maxim

    2010-01-01

    We review various field theory approaches to the description of neutrino oscillations in vacuum and external fields. First we discuss a relativistic quantum mechanics based approach which involves the temporal evolution of massive neutrinos. To describe the dynamics of the neutrinos system we use exact solutions of wave equations in presence of an external field. It allows one to exactly take into account both the characteristics of neutrinos and the properties of an external field. In particular, we examine flavor oscillations an vacuum and in background matter as well as spin flavor oscillations in matter under the influence of an external electromagnetic field. Moreover we consider the situation of hypothetical nonstandard neutrino interactions with background fermions. In the case of ultrarelativistic particles we reproduce an effective Hamiltonian which is used in the standard quantum mechanical approach for the description of neutrino oscillations. The corrections to the quantum mechanical Hamiltonian a...

  9. Geometric Computing Based on Computerized Descriptive Geometric

    Institute of Scientific and Technical Information of China (English)

    YU Hai-yan; HE Yuan-Jun

    2011-01-01

    Computer-aided Design (CAD), video games and other computer graphic related technology evolves substantial processing to geometric elements. A novel geometric computing method is proposed with the integration of descriptive geometry, math and computer algorithm. Firstly, geometric elements in general position are transformed to a special position in new coordinate system. Then a 3D problem is projected to new coordinate planes. Finally, according to 2D/3D correspondence principle in descriptive geometry, the solution is constructed computerized drawing process with ruler and compasses. In order to make this method a regular operation, a two-level pattern is established. Basic Layer is a set algebraic packaged function including about ten Primary Geometric Functions (PGF) and one projection transformation. In Application Layer, a proper coordinate is established and a sequence of PGFs is sought for to get the final results. Examples illustrate the advantages of our method on dimension reduction, regulatory and visual computing and robustness.

  10. System Design Description PFP Thermal Stabilization

    Energy Technology Data Exchange (ETDEWEB)

    RISENMAY, H.R.

    2000-04-25

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures.

  11. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  12. A Modal Description of Multiport Antennas

    Directory of Open Access Journals (Sweden)

    Jonathan J. Lynch

    2011-01-01

    Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

  13. Development of a methodology for microstructural description

    Directory of Open Access Journals (Sweden)

    Vanderley de Vasconcelos

    1999-07-01

    Full Text Available A systematic methodology for microstructural description can help the task of obtaining the processing x microstructure x properties x performance relationships. There are, however, some difficulties in performing this task, which are related mainly to the following three factors: the complexity of the interactions between microstructural features; difficulties in evaluating geometric parameters of microstructural features; and difficulties in relating these geometric parameters to process variables. To solve some of these problems, it is proposed a methodology that embodies the following features: takes into account the different possible types of approaches for the microstructural description problem; includes concepts and tools of Total Quality Management; is supported on techniques of system analysis; and makes use of computer modeling and simulation and statistical design of experiments tools. The methodology was applied on evaluating some topological parameters during sintering process and its results were compared with available experimental data.

  14. XML for Detector Description at GLAST

    Institute of Scientific and Technical Information of China (English)

    J.Bogart; D.Favretto; 等

    2001-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications,allows retrieval of information in ways which are natural to those applications,and is maintainable has been vexing physicists for some time,Although invented to address an entirely different problem domain,the document markup metalanguage XML is well-suited to detector description.This paper describes its use for a GLAST detector.[7

  15. Wavelet description of the Glottal Gap

    OpenAIRE

    Gómez Vilda, Pedro; Nieto Lluis, Victor; Rodellar Biarge, M. Victoria; Martínez Olalla, Rafael; Muñoz Mulas, Cristina Elena; Álvarez Marquina, Agustin; Mazaira Fernández, Luis Miguel; Scola Yurrita, Bartolomé; Ramírez Calvo, Carlos; Poletti Serafini,Daniel

    2013-01-01

    The Glottal Source correlates reconstructed from the phonated parts of voice may render interesting information with applicability in different fields. One of them is defective closure (gap) detection. Through the paper the background to explain the physical foundations of defective gap are reviewed. A possible method to estimate defective gap is also presented based on a Wavelet Description of the Glottal Source. The method is validated using results from the analysis of a gender-balanced sp...

  16. Against a Descriptive Vindication of Doxastic Voluntarism

    DEFF Research Database (Denmark)

    Nottelmann, Nikolaj

    2017-01-01

    evidence does not decisively undermine voluntarism either. Thus, it would seem that normative doxastic ethics could not justifiedly appeal directly to voluntarist assumptions. Second, I attempt to bring out how doxastic voluntarists may nevertheless hope to stir methodological worries within normative...... of this kind of descriptive vindication. However, a closer examination reveals that nothing obviously suggests that voluntarism provides a better regimentation of our ascription practices as compared to rival theses concerning human powers of doxastic control....

  17. TINTE. Nuclear calculation theory description report

    Energy Technology Data Exchange (ETDEWEB)

    Gerwin, H.; Scherer, W.; Lauer, A. [Forschungszentrum Juelich GmbH (DE). Institut fuer Energieforschung (IEF), Sicherheitsforschung und Reaktortechnik (IEF-6); Clifford, I. [Pebble Bed Modular Reactor (Pty) Ltd. (South Africa)

    2010-01-15

    The Time Dependent Neutronics and Temperatures (TINTE) code system deals with the nuclear and the thermal transient behaviour of the primary circuit of the High-temperature Gas-cooled Reactor (HTGR), taking into consideration the mutual feedback effects in twodimensional axisymmetric geometry. This document contains a complete description of the theoretical basis of the TINTE nuclear calculation, including the equations solved, solution methods and the nuclear data used in the solution. (orig.)

  18. System design description PFP thermal stabilization

    Energy Technology Data Exchange (ETDEWEB)

    LARKIN, K.A.

    1999-02-23

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: functional design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides.

  19. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...... source Matlab code. The problems with the early MDL approaches are discussed. Finally the MDL approach is extended to an MDL Appearance Model, which is proposed as a means to perform unsupervised image segmentation....

  20. Chiropractic and CAM Utilization: A Descriptive Review

    OpenAIRE

    Meeker William C; Lawrence Dana J

    2007-01-01

    Abstract Objective To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions Data Sources A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. Data Selection A total of 137 papers were selected, based upon including inform...

  1. Fundamental concepts of phenomenology and descriptive psychopathology

    Directory of Open Access Journals (Sweden)

    Debajit Gogoi

    2017-01-01

    Full Text Available For a better understanding of what psychiatry is all about, the importance and stronghold of phenomenology and descriptive psychopathology in psychiatry has never been overstated. Biological psychiatry has accumulated enough evidences of mental illnesses until now but that does not mean that phenomenology and psychopathology would lose its shine. Rather psychopathology and phenomenology will afoot stronger as it is the philosophy of psychiatry.

  2. A W-Grammar Description for ADA.

    Science.gov (United States)

    1986-12-01

    Language Reference Manual. In MT opinion, the W- gramars fall short of this goal since they are less readable than BNF for determining Ada’s syntax, and...37 Summary . . . . . . . . . . . . . . .... . 39 V. Conclusion .. . . . . . . . . . .. . . .* . . . . 40 Ada Constructs Not Covered in W- gramar B...library unit. The problem with the Language Reference Manual description is not that BNF is too antiquated for language definition, but that English

  3. Towards a Mathematical Description of Biodiversity Evolution

    Science.gov (United States)

    Horvath, Jorge E.

    2014-09-01

    We outline in this work a mathematical description of biodiversity evolution based on a second-order differential equation (also known as the "inertial/Galilean view"). After discussing the motivations and explicit forms of the simplest "forces", we are lead to an equation analogue to a harmonic oscillator. The known solutions for the homogeneous problem are then tentatively related to the biodiversity curves of Sepkoski and Alroy et al., suggesting mostly an inertial behavior of the time evolution of the number of genera and a quadratic behavior in some long-term evolution after extinction events. We present the Green function for the dynamical system and apply it to the description of the recovery curve after the Permo-Triassic extinction, as recently analyzed by Burgess, Bowring and Shen. Even though the agreement is not satisfactory, we point out direct connections between observed drop times after massive extinctions and mathematical constants and discuss why the failure ensues, suggesting a more complex form of the second-order mathematical description.

  4. A Descriptive Genetic Classification for Glaciovolcanoes

    Science.gov (United States)

    Edwards, B. R.; Russell, K.; Porritt, L. A.

    2014-12-01

    We review the recently published descriptive genetic classification for glaciovolcanoes (Russell et al., Quat Sci Rv, 2014). The new classification uses 'tuya' as a root word for all glaciovolcanic edifices, and with modifiers that make the classification descriptive (e.g., andesitic, lava-dominated, flat topped tuya). Although tuyas can range in composition from basaltic to rhyolitic, many of the characteristics diagnostic of glaciovolcanic environments are largely independent of lava composition (e.g., edifice morphology, columnar jointing patterns, glass distributions, pyroclast shapes). Tuya subtypes are first classified on the basis of variations in edifice-scale morphologies (e.g., conical tuya) then, on the proportions of the essential lithofacies (e.g., tephra-dominated conical tuya), and lastly on magma composition (e.g., basaltic, tephra-dominated, conical tuya). The lithofacies associations within tuyas broadly record the interplay between magmatic and glaciohydraulic conditions extent during the active phases of the eruption, including the dominant style of eruption (e.g., explosive vs. effusive). We present nine distinct, endmember models for glaciovolcanic edifices that simultaneously record changes in eruption conditions (explosive, transitional, effusive) for different general glaciohydraulic conditions (closed/sealed, leaky/partly sealed, open/well-drained). To date we have identified potential examples for 7 of the 9 models. Use of a simplified, descriptive classification scheme for glaciovolcanoes will facilitate communications amongst volcanologists and planetary scientists and the use of tuyas for recovering critical paleo-environmental information, particularly the local glaciohydraulics extent during eruptions.

  5. Towards a Mathematical Description of Biodiversity Evolution

    Directory of Open Access Journals (Sweden)

    Jorge E. Horvath

    2014-09-01

    Full Text Available We outline in this work a mathematical description of biodiversity evolution based on a second-order differential equation (also known as the “inertial/Galilean view”. After discussing the motivations and explicit forms of the simplest “forces”, we are lead to an equation analogue to a harmonic oscillator. The known solutions for the homogeneous problem are then tentatively related to the biodiversity curves of Sepkoski and Alroy et al., suggesting mostly an inertial behavior of the time evolution of the number of genera and a quadratic behavior in some long-term evolution after extinction events. We present the Green function for the dynamical system and apply it to the description of the recovery curve after the Permo-Triassic extinction, as recently analyzed by Burgess, Bowring and Shen. Even though the agreement is not satisfactory, we point out direct connections between observed drop times after massive extinctions and mathematical constants and discuss why the failure ensues, suggesting a more complex form of the second-order mathematical description.

  6. Dynamic description logic model for data integration

    Institute of Scientific and Technical Information of China (English)

    Guoshun HAO; Shilong MA; Yuefei SUI; Jianghua LV

    2008-01-01

    Data integration is the issue of retrieving and combining data residing at distributed and heterogeneous sources,and of providing users with transparent access without being aware of the details of the sources.Data integration is a very important issue because it deals with data infrastructure issues of coordinated computing systems.Despite its importance,the following key challenges make data integration one of the longest standing problems around:1) how to solve the system heterogeneity;2) how to build a global model;3) how to process queries automatically and correctly;and 4) how to solve semantic heterogeneity. This paper presents an extended dynamic description logic language to describe systems with dynamic actions.By this language,a-universal and unified model for relational database systems and a model for data integration are presented.This paper presents a universal and unified description logic model for relational databases.The model is universal because any relational database system can be automatically transformed to the model;it is unified because it integrates three essential components of relational databases together:description logic knowledge bases modeling the relational data,atomic modalities modeling the atomic relational operations,and combined modalities modeling the combined relational operations-queries. Furthermore,a description logic model for data integration is proposed which contains four layers of ontologies.Based on the model,a solution for each key challenge is proposed:a universal model eliminates system heterogeneity;a novel global model including three ontologies is proposed with some important benefits;a query process mechanism is provided by which user queries can be decomposed to queries over the sources;and for solving the semantic heterogeneity,this paper provides a framework under which semantic relations can be expressed and inferred. In summary,this paper presents a dynamic knowledge base framework by an extended

  7. Horizons of description: Black holes and complementarity

    Science.gov (United States)

    Bokulich, Peter Joshua Martin

    Niels Bohr famously argued that a consistent understanding of quantum mechanics requires a new epistemic framework, which he named complementarity . This position asserts that even in the context of quantum theory, classical concepts must be used to understand and communicate measurement results. The apparent conflict between certain classical descriptions is avoided by recognizing that their application now crucially depends on the measurement context. Recently it has been argued that a new form of complementarity can provide a solution to the so-called information loss paradox. Stephen Hawking argues that the evolution of black holes cannot be described by standard unitary quantum evolution, because such evolution always preserves information, while the evaporation of a black hole will imply that any information that fell into it is irrevocably lost---hence a "paradox." Some researchers in quantum gravity have argued that this paradox can be resolved if one interprets certain seemingly incompatible descriptions of events around black holes as instead being complementary. In this dissertation I assess the extent to which this black hole complementarity can be undergirded by Bohr's account of the limitations of classical concepts. I begin by offering an interpretation of Bohr's complementarity and the role that it plays in his philosophy of quantum theory. After clarifying the nature of classical concepts, I offer an account of the limitations these concepts face, and argue that Bohr's appeal to disturbance is best understood as referring to these conceptual limits. Following preparatory chapters on issues in quantum field theory and black hole mechanics, I offer an analysis of the information loss paradox and various responses to it. I consider the three most prominent accounts of black hole complementarity and argue that they fail to offer sufficient justification for the proposed incompatibility between descriptions. The lesson that emerges from this

  8. Quantum Description of Optical Devices Used in Interferometry

    Directory of Open Access Journals (Sweden)

    P. Kucera

    2007-09-01

    Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

  9. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  10. Database Description - DGBY | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us ...EF URLs by Artio About This Database Database Description Download License Update History of This Database Site Policy | Contact Us Database Description - DGBY | LSDB Archive ...

  11. Qualitative Description of Spatial Quality in Inclusive Architecture

    DEFF Research Database (Denmark)

    Ryhl, Camilla; Kajita, Masashi; Sørensen, Rene

    2016-01-01

    as reflects an applied method for producing the qualitative description of selected buildings that embody UD through creative solutions. The qualitative description of collected examples appears to be effective in delineating sensory aspects of spatial experience; however the systematic development...

  12. Diffusive description of lattice gas models

    DEFF Research Database (Denmark)

    Fiig, T.; Jensen, H.J.

    1993-01-01

    in time. We have numerically investigated the power spectrum of the density fluctuations, the lifetime distribution, and the spatial correlation function. We discuss the appropriate Langevin-like diffusion equation which can reproduce our numerical findings. Our conclusion is that the deterministic...... lattice gases are described by a diffusion equation without any bulk noise. The open lattice gas exhibits a crossover behavior as the probability for introducing particles at the edge of the system becomes small. The power spectrum changes from a 1/f to a 1/f2 spectrum. The diffusive description, proven...

  13. The Gravitational Description of Coarse Grained Microstates

    CERN Document Server

    Alday, L F; Messamah, I; Alday, Luis F.; Boer, Jan de; Messamah, Ilies

    2006-01-01

    In this paper we construct a detailed map from pure and mixed half-BPS states of the D1-D5 system to half-BPS solutions of type IIB supergravity. Using this map, we can see how gravity arises through coarse graining microstates, and we can explicitly confirm the microscopic description of conical defect metrics, the M=0 BTZ black hole and of small black rings. We find that the entropy associated to the natural geometric stretched horizon typically exceeds that of the mixed state from which the geometry was obtained.

  14. LCDD: A complete detector description package

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman, E-mail: Norman.Graf@slac.stanford.edu; McCormick, Jeremy, E-mail: Jeremy.McCormick@slac.stanford.edu

    2015-07-21

    LCDD has been developed to provide a complete detector description package for physics detector simulations using Geant4. All aspects of the experimental setup, such as the physical geometry, magnetic fields, and sensitive detector readouts, as well as control of the physics simulations, such as physics processes, interaction models and kinematic limits, are defined at runtime. Users are therefore able to concentrate on the design of the detector system without having to master the intricacies of C++ programming or being proficient in setting up their own Geant4 application. We describe both the XML-based file format and the processors which communicate this information to the underlying Geant4 simulation toolkit.

  15. Hamiltonian description of the ideal fluid

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems.

  16. A coordinate description of partonic processes

    CERN Document Server

    Erdogan, Ozan

    2016-01-01

    We review a perturbative description of amplitudes in coordinate space, aiming at an intuitive perspective on the roles of "long" and "short" distances. We begin with coordinate-space leading regions for fixed-angle scattering amplitudes, and develop approximations and factorizations in analogy to similar procedures in momentum space. There are also applications to products of Wilson lines, including the familiar cusp amplitude. We briefly discuss cross sections from the coordinate viewpoint, and the mechanism by which infrared singularities cancel in inclusive cross sections.

  17. The gravitational description of coarse grained microstates

    Energy Technology Data Exchange (ETDEWEB)

    Alday, Luis F. [Institute for Theoretical Physics and Spinoza Institute, Utrecht University, 3508 TD Utrecht (Netherlands); Boer, Jan de [Instituut voor Theoretische Fysica, Valckenierstraat 65, 1018XE Amsterdam (Netherlands); Messamah, Ilies [Instituut voor Theoretische Fysica, Valckenierstraat 65, 1018XE Amsterdam (Netherlands)

    2006-12-15

    In this paper we construct a detailed map from pure and mixed half-BPS states of the D1-D5 system to half-BPS solutions of type IIB supergravity. Using this map, we can see how gravity arises through coarse graining microstates, and we can explicitly confirm the microscopic description of conical defect metrics, the M = 0 BTZ black hole and of small black rings. We find that the entropy associated to the natural geometric stretched horizon typically exceeds that of the mixed state from which the geometry was obtained.

  18. Theoretical Description of the Fission Process

    Energy Technology Data Exchange (ETDEWEB)

    Witold Nazarewicz

    2003-07-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process.

  19. System design description PFP thermal stabilization

    Energy Technology Data Exchange (ETDEWEB)

    RISENMAY, H.R.

    1998-11-10

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides.

  20. Razi's description and treatment of facial paralysis.

    Science.gov (United States)

    Tabatabaei, Seyed Mahmood; Kalantar Hormozi, Abdoljalil; Asadi, Mohsen

    2011-01-01

    In the modern medical era, facial paralysis is linked with the name of Charles Bell. This disease, which is usually unilateral and is a peripheral facial palsy, causes facial muscle weakness in the affected side. Bell gave a complete description of the disease; but historically other physicians had described it several hundred years prior although it had been ignored for different reasons, such as the difficulty of the original text language. The first and the most famous of these physicians who described this disease was Mohammad Ibn Zakaryya Razi (Rhazes). In this article, we discuss his opinion.

  1. Modelling Imprecise Arguments in Description Logic

    Directory of Open Access Journals (Sweden)

    LETIA, I. A.

    2009-10-01

    Full Text Available Real arguments are a mixture of fuzzy linguistic variables and ontological knowledge. This paper focuses on modelling imprecise arguments in order to obtain a better interleaving of human and software agents argumentation, which might be proved useful for extending the number of real life argumentative-based applications. We propose Fuzzy Description Logic as the adequate technical instrumentation for filling the gap between human arguments and software agents arguments. A proof of concept scenario has been tested with the fuzzyDL reasoner.

  2. The Athena Data Dictionary and Description Language

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    We have developed a data object description tool suite and service for Athena consisting of :a language grammar based upon an extended proper subset of IDL 2.0,a compiler front end based upon this language grammar,JavaCC,and a Java Reflection API-like interface,and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters and data object scripting interfaces.We present here details of our work and experience to date on the Athena Definition Language and Athena Data Dictionary.

  3. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  4. Behaviorally Modeling Games of Strategy Using Descriptive Q-learning

    Science.gov (United States)

    2013-01-01

    REPORT Behaviorally Modeling Games of Strategy Using Descriptive Q-learning 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: Modeling human decision making... Games of Strategy Using Descriptive Q-learning Report Title ABSTRACT Modeling human decision making in strategic problem domains is challenging with...an unknown automated opponent. Behaviorally Modeling Games of Strategy Using Descriptive Q-learning Roi Ceren Department of Computer Science

  5. 48 CFR 811.104-71 - Purchase description clauses.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Purchase description... Documents 811.104-71 Purchase description clauses. (a) When a solicitation uses “brand name or equal” purchase descriptions, the contracting officer must include in the solicitation the clause at...

  6. 47 CFR 79.3 - Video description of video programming.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Video description of video programming. 79.3... CLOSED CAPTIONING AND VIDEO DESCRIPTION OF VIDEO PROGRAMMING § 79.3 Video description of video programming. (a) Definitions. For purposes of this section the following definitions shall apply:...

  7. 27 CFR 19.168 - Description of plant.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Description of plant. 19..., DEPARTMENT OF THE TREASURY LIQUORS DISTILLED SPIRITS PLANTS Qualification of Distilled Spirits Plants § 19.168 Description of plant. (a) The application for registration shall include a description of...

  8. 48 CFR 514.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Descriptive literature... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 514.202-5 Descriptive literature... FAR 52.211-6 satisfies the requirement for descriptive literature....

  9. 48 CFR 14.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Descriptive literature. 14... CONTRACTING METHODS AND CONTRACT TYPES SEALED BIDDING Solicitation of Bids 14.202-5 Descriptive literature. (a) Policy. Contracting officers must not require bidders to furnish descriptive literature unless it...

  10. Improved description of metal oxide stability

    DEFF Research Database (Denmark)

    Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

    2015-01-01

    The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

  11. Embedded multiple description coding of video.

    Science.gov (United States)

    Verdicchio, Fabio; Munteanu, Adrian; Gavrilescu, Augustin I; Cornelis, Jan; Schelkens, Peter

    2006-10-01

    Real-time delivery of video over best-effort error-prone packet networks requires scalable erasure-resilient compression systems in order to 1) meet the users' requirements in terms of quality, resolution, and frame-rate; 2) dynamically adapt the rate to the available channel capacity; and 3) provide robustness to data losses, as retransmission is often impractical. Furthermore, the employed erasure-resilience mechanisms should be scalable in order to adapt the degree of resiliency against transmission errors to the varying channel conditions. Driven by these constraints, we propose in this paper a novel design for scalable erasure-resilient video coding that couples the compression efficiency of the open-loop architecture with the robustness provided by multiple description coding. In our approach, scalability and packet-erasure resilience are jointly provided via embedded multiple description scalar quantization. Furthermore, a novel channel-aware rate-allocation technique is proposed that allows for shaping on-the-fly the output bit rate and the degree of resiliency without resorting to channel coding. As a result, robustness to data losses is traded for better visual quality when transmission occurs over reliable channels, while erasure resilience is introduced when noisy links are involved. Numerical results clearly demonstrate the advantages of the proposed approach over equivalent codec instantiations employing 1) no erasure-resilience mechanisms, 2) erasure-resilience with nonscalable redundancy, or 3) data-partitioning principles.

  12. Quantum gravity from descriptive set theory

    Energy Technology Data Exchange (ETDEWEB)

    El Naschie, M.S

    2004-03-01

    We start from Hilbert's criticism of the axioms of classical geometry and the possibility of abandoning the Archimedean axiom. Subsequently we proceed to the physical possibility of a fundamental limitation on the smallest length connected to certain singular points in spacetime and below which measurements become meaningless, Finally we arrive at the conclusion that maximising the Hawking-Bekenstein informational content of spacetime makes the existence of a transfinite geometry for physical 'spacetime' not only plausible but probably inevitable. The main part of the paper is then concerned with a proposal for a mathematical description of a transfinite, non-Archimedean geometry using descriptive set theory. Nevertheless, and despite all abstract mathematics, we remain quite close to similar lines of investigation initiated by physicists like A. Wheeler, D. Finkelstein and G. 'tHooft. In particular we introduce a logarithmic gauge transformation linking classical gravity with the electro weak via a version of informational entropy. That way we may claim to have accomplished an important step towards a general theory of quantum gravity using {epsilon}{sup ({infinity}}{sup )} and complexity theory and finding that {alpha}{sub G}=(2){sup {alpha}}{sup -bar{sub ew-1}} congruent with (1.7)(10){sup 38} where {alpha}{sub G} is the dimensionless Newton gravity constant, and {alpha}{sub ew}{approx_equal}128 is the fine structure constant at the electro weak scale.

  13. PSYCHOLOGICAL INSIGHT INTO ARTISTIC DESCRIPTION OF MUSIC

    Directory of Open Access Journals (Sweden)

    Elena Valeryevna Sivakova

    2015-01-01

    Full Text Available The article is dedicated to such an interesting and diverse in science phenomenon as psychological insight. In two directions of philology – Literature Studies and Linguistics – psychological insight is understood differently. That is why the authors take into account both definitions in order to create a complete picture.Based on consideration of the notion of psychological insight from the point of view of Literature Studies and Linguistics, the authors highlight its common philological criteria (soul and feelings of the character, description of the inner world of the character through the details, fragments of the text showing events, thoughts and motivates of the character; cognitive and pragma-linguistic features (supposition, influence upon the reader; methods and ways of its representation in the works of art (the author’s direct indication of the feelings in the character’s soul, inner details: inner monologue and author’s psychological narration, inner speech, memory images and imagination, description of dreams. The article also analyzes the examples of psychological impact of music on consciousness and subconsciousness of the characters of the texts

  14. Exploiting spatial descriptions in visual scene analysis.

    Science.gov (United States)

    Ziegler, Leon; Johannsen, Katrin; Swadzba, Agnes; De Ruiter, Jan P; Wachsmuth, Sven

    2012-08-01

    The reliable automatic visual recognition of indoor scenes with complex object constellations using only sensor data is a nontrivial problem. In order to improve the construction of an accurate semantic 3D model of an indoor scene, we exploit human-produced verbal descriptions of the relative location of pairs of objects. This requires the ability to deal with different spatial reference frames (RF) that humans use interchangeably. In German, both the intrinsic and relative RF are used frequently, which often leads to ambiguities in referential communication. We assume that there are certain regularities that help in specific contexts. In a first experiment, we investigated how speakers of German describe spatial relationships between different pieces of furniture. This gave us important information about the distribution of the RFs used for furniture-predicate combinations, and by implication also about the preferred spatial predicate. The results of this experiment are compiled into a computational model that extracts partial orderings of spatial arrangements between furniture items from verbal descriptions. In the implemented system, the visual scene is initially scanned by a 3D camera system. From the 3D point cloud, we extract point clusters that suggest the presence of certain furniture objects. We then integrate the partial orderings extracted from the verbal utterances incrementally and cumulatively with the estimated probabilities about the identity and location of objects in the scene, and also estimate the probable orientation of the objects. This allows the system to significantly improve both the accuracy and richness of its visual scene representation.

  15. The appropriateness of XML for diagnostic description

    Energy Technology Data Exchange (ETDEWEB)

    Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

    2007-10-15

    A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

  16. Initial rheological description of high performance concretes

    Directory of Open Access Journals (Sweden)

    Alessandra Lorenzetti de Castro

    2006-12-01

    Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

  17. Towards a realistic description of hadron resonances

    Science.gov (United States)

    Schmidt, R. A.; Canton, L.; Schweiger, W.; Plessas, W.

    2016-08-01

    We report on our attempts of treating excited hadron states as true quantum resonances. Hitherto the spectroscopy of mesons, usually considered as quark-antiquark systems, and of baryons, usually considered as three-quark systems, has been treated through excitation spectra of bound states (namely, confined few-quark systems), corresponding to poles of the quantum-mechanical resolvent at real negative values in the complex energy plane. As a result the wave functions, i.e. the residua of the resolvent, have not exhibited the behaviour as required for hadron resonances with their multiple decay modes. This has led to disturbing shortcomings in the description of hadronic resonance phenomena. We have aimed at a more realistic description of hadron resonances within relativistic constituent-quark models taking into account explicitly meson-decay channels. The corresponding coupled-channels theory is based on a relativistically invariant mass operator capable of producing hadron ground states with real energies and hadron resonances with complex energies, the latter corresponding to poles in the lower half-plane of the unphysical sheet of the complex energy plane. So far we have demonstrated the feasibility of the coupled-channels approach to hadron resonances along model calculations producing indeed the desired properties. The corresponding spectral properties will be discussed in this contribution. More refined studies are under way towards constructing a coupled-channels relativistic constituent-quark model for meson and baryon resonances.

  18. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  19. COG Software Architecture Design Description Document

    Energy Technology Data Exchange (ETDEWEB)

    Buck, R M; Lent, E M

    2009-09-21

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  20. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  1. Context-descriptive Prototypes and Their Application to Medicine Administration

    DEFF Research Database (Denmark)

    Bossen, Claus; Jørgensen, Jens Bæk

    2004-01-01

    A context-descriptive prototype is an interactive graphical animation, driven by a formal, executable engine, implemented in some programming or modelling language. The two main properties of a context-descriptive prototype are: (1) it is an integrated description that describes system, work...... of the system, but also of the work processes, can be made explicitly and become subject for discussions and further elaboration. We describe a concrete context-descriptive prototype of the hospital work process medicine administration and its support by a new pervasive system. We discuss findings from...... evaluation of the prototype in cooperation with nurses, and finally compare context-descriptive prototypes with other kinds of prototypes....

  2. Security report on Siloe - the descriptive part. (1963); Rapport de surete de Siloe - partie descriptive (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Ageron, P.; Chatoux, J.; Denielou, G.; Jacquemain, M.; Mitault, G.; Robien, E. de; Rossillon, F. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-07-01

    This report is a full description of the site, the reactor, the building and the experimental facilities. It gives the nuclear, thermodynamic and hydrodynamic characteristics of the core. (authors) [French] Ce rapport decrit completement le site, le reacteur, les batiments et les installations experimentales. Il donne les caracteristiques nucleaires, thermodynamiques et hydrodynamiques du coeur. (auteurs)

  3. Template for safety reports with descriptive example

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

  4. Minimal dynamical description of eye movements

    Science.gov (United States)

    Specht, Juan I.; Dimieri, Leonardo; Urdapilleta, Eugenio; Gasaneo, Gustavo

    2017-02-01

    In this paper we have addressed the question of whether a simple set of functions being the solution of a model, namely the damped harmonic oscillator with a general driving force, can satisfactorily describe data corresponding to ocular movements produced during a visual search task. Taking advantage of its mathematical tractability, we first focused on the simplest driving force compatible to the experimental data, a step-like activation. Under this hypothesis we were able to further simplify the system, once data from several experiments were fitted, producing an essentially parameter-free model that we plan to use in future applications. To increase the quality of the description of individual movements, we expanded the complexity in the forcing term and solved the inverse problem by using a proper mathematical formalism. Furthermore, additional terms, those arising from ocular drift and tremor, may be included within the same mathematical approach.

  5. Integrated Project Management System description. [UMTRAP Project

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office ( Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs.

  6. General description of discriminating quantum operations

    Institute of Scientific and Technical Information of China (English)

    Zhang Ke-Jia; Zhu Ping; Gao Fei; Guo Fen-Zhuo; Qin Su-Juan; Wen Qiao-Yan

    2011-01-01

    The discrimination of quantum operations plays a key role in quantum information and computation.Unlike discriminating quantum states,it has some special properties which can be carried out in practice.In this paper,we provide a general description of discriminating quantum operations.Concretely speaking,we describe the distinguishability between quantum operations using a measure called operator fidelity.It is shown that,employing the theory of operator fidelity,we can not only verify some previous results to discriminate unitary operations,but also exhibit a more general discrimination condition.We further apply our results to analysing the security of some quantum cryptographic protocols and discuss the realization of our method using well-developed quantum algorithms.

  7. Boundary Liouville Theory: Hamiltonian Description and Quantization

    Directory of Open Access Journals (Sweden)

    Harald Dorn

    2007-01-01

    Full Text Available The paper is devoted to the Hamiltonian treatment of classical and quantum properties of Liouville field theory on a timelike strip in 2d Minkowski space. We give a complete description of classical solutions regular in the interior of the strip and obeying constant conformally invariant conditions on both boundaries. Depending on the values of the two boundary parameters these solutions may have different monodromy properties and are related to bound or scattering states. By Bohr-Sommerfeld quantization we find the quasiclassical discrete energy spectrum for the bound states in agreement with the corresponding limit of spectral data obtained previously by conformal bootstrap methods in Euclidean space. The full quantum version of the special vertex operator $e^varphi$ in terms of free field exponentials is constructed in the hyperbolic sector.

  8. NIF Integrated Computer Controls System Description

    Energy Technology Data Exchange (ETDEWEB)

    VanArsdall, P.

    1998-01-26

    This System Description introduces the NIF Integrated Computer Control System (ICCS). The architecture is sufficiently abstract to allow the construction of many similar applications from a common framework. As discussed below, over twenty software applications derived from the framework comprise the NIF control system. This document lays the essential foundation for understanding the ICCS architecture. The NIF design effort is motivated by the magnitude of the task. Figure 1 shows a cut-away rendition of the coliseum-sized facility. The NIF requires integration of about 40,000 atypical control points, must be highly automated and robust, and will operate continuously around the clock. The control system coordinates several experimental cycles concurrently, each at different stages of completion. Furthermore, facilities such as the NIF represent major capital investments that will be operated, maintained, and upgraded for decades. The computers, control subsystems, and functionality must be relatively easy to extend or replace periodically with newer technology.

  9. Two-Component Description for Relativistic Fermions

    Institute of Scientific and Technical Information of China (English)

    CHEN Yu-Qi; SANG Wen-Long; YANG Lan-Fei

    2009-01-01

    We propose a two-component form to describe massive relativistic fermions in gauge theories. Relations between the Green's functions in this form and those in the conventional four-component form are derived. It is shown that the S-matrix elements in both forms are exactly the same. The description of the fermion in the new form simplifies significantly the γ-matrix algebra in the four-component form. In particular, in perturbative calculations the propagator of the fermion is a scalar function. As examples, we use this form to reproduce the relativistic spectrum of hydrodron atom, the S-matrix of e+ e-→μ+ μ- and QED one-loop vacuum polarization of photon.

  10. Stochastic description for open quantum systems

    CERN Document Server

    Calzetta, E A; Verdaguer, E; Calzetta, Esteban; Roura, Albert; Verdaguer, Enric

    2000-01-01

    A linear open quantum system consisting of a harmonic oscillator coupled linearly to an infinite set of independent harmonic oscillators is considered; these oscillators have a general spectral density function and are initially in thermal equilibrium. Using the influence functional formalism a formal Langevin equation can be introduced to describe the system's fully quantum properties even beyond the semiclassical regime. It is shown that the reduced Wigner function for the system is exactly the formal distribution function resulting from averaging both over the initial conditions and the stochastic source of the formal Langevin equation. The master equation for the reduced density matrix is then obtained in the same way a Fokker-Planck equation can always be derived from a Langevin equation characterizing a stochastic process. We also show that the quantum correlation functions for the system can be deduced within the stochastic description provided by the Langevin equation. It is emphasized that when the s...

  11. PHONOLOGICAL AND LEXICAL DESCRIPTION OF MODEBUR LANGUAGE

    Directory of Open Access Journals (Sweden)

    La Ino

    2013-03-01

    Full Text Available This article, in which the theory structural phonology was used, discusses the phonological and lexical description of Modebur language, one of the local languages in Pantar Island. The result of analysis shows that the Modebur language has five vowels; they are /i/, /e/, /a/, /o/, and /u/. They all can distribute in the initial, medial and final position of words. It has sixteen phonemes and sixteen consonants, many of which can distribute in the beginning of words, some can distribute in the initial and medial position of words only, and one can only distribute in the final position of words. The consonants which can distribute completely are /p/, /b/, /m/, /t/, /n/, /s/, /l/, /k/, /?/, /g/, and the ones which can distribute in the initial and medial position of words are /j/, /h/, /w/, and the one which can distribute in the final position of words is /?/.  

  12. Holographic Description of AdS Cosmologies

    CERN Document Server

    Hertog, T; Hertog, Thomas; Horowitz, Gary T.

    2005-01-01

    To gain insight in the quantum nature of the big bang, we study the dual field theory description of asymptotically anti-de Sitter solutions of supergravity that have cosmological singularities. The dual theories do not appear to have a stable ground state. One regularization of the theory causes the cosmological singularities in the bulk to turn into giant black holes with scalar hair. We interpret these hairy black holes in the dual field theory and use them to compute a finite temperature effective potential. In our study of the field theory evolution, we find no evidence for a "bounce" from a big crunch to a big bang. Instead, it appears that the big bang is a rare fluctuation from a generic equilibrium quantum gravity state.

  13. Handbook of Manufacturing Control Fundamentals, description, configuration

    CERN Document Server

    Lödding, Hermann

    2013-01-01

    This first-time English publication of one of Germany’s leading manufacturing control handbooks provides a comprehensive overview of the state of the art, with detailed and easy to understand descriptions of numerous control techniques from Kanban to CONWIP to Backlog Control. Based on the proven funnel model and written for the industry, this book clearly illustrates how companies can use manufacturing control to effectively improve on-time delivery, reduce inventories and cut down throughput times. “This book distinguishes itself with its convincing systematic approach based on thorough international research. Its clear presentation and direct applicability for analysing and configuring the manufacturing control make this handbook an outstanding and unique publication on PPC.” Hans-Peter Wiendahl “The field of manufacturing control is very convincingly reviewed and presented from a theoretical and methodological perspective. Both researchers as well as practitioners will profit from it.” Peter N...

  14. Demonstration Advanced Avionics System (DAAS) function description

    Science.gov (United States)

    Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

    1982-01-01

    The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft.

  15. A statistical mechanical description of biomolecular hydration

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    We present an efficient and accurate theoretical description of the structural hydration of biological macromolecules. The hydration of molecules of almost arbitrary size (tRNA, antibody-antigen complexes, photosynthetic reaction centre) can be studied in solution and in the crystal environment. The biomolecular structure obtained from x-ray crystallography, NMR, or modeling is required as input information. The structural arrangement of water molecules near a biomolecular surface is represented by the local water density analogous to the corresponding electron density in an x-ray diffraction experiment. The water-density distribution is approximated in terms of two- and three-particle correlation functions of solute atoms with water using a potentials-of-mean-force expansion.

  16. Description of Concrete Durability Damage Process

    Institute of Scientific and Technical Information of China (English)

    CHEN Yueshun; WEI Jun; ZHAO Xiaolong

    2006-01-01

    Based on the damage mechanics, the concrete damage grade of relative stable environment in measurable spatial is constructed in this paper, and the concrete damage evolving model and corresponding failure rule is constructed based on the damage grade fore-defined. Therefore, the concrete health status and the residual life-span can be assessed according to the measured damage grade. It is propitious to drive the development of concrete durability assessment and life-span forecast. Its feasibility of concrcte damage process description and health assessment is validated with the example in this paper, in which the damage state is described with the ultrasound velocity attenuation, and the freeze-thaw process is regarded as the concrete durability degradation influencing factor to reflect the concrete durability degradation process.

  17. Geometric description of images as topographic maps

    CERN Document Server

    Caselles, Vicent

    2010-01-01

    This volume discusses the basic geometric contents of an image and presents a tree data structure to handle those contents efficiently. The nodes of the tree are derived from connected components of level sets of the intensity, while the edges represent inclusion information. Grain filters, morphological operators simplifying these geometric contents, are analyzed and several applications to image comparison and registration, and to edge and corner detection, are presented. The mathematically inclined reader may be most interested in Chapters 2 to 6, which generalize the topological Morse description to continuous or semicontinuous functions, while mathematical morphologists may more closely consider grain filters in Chapter 3. Computer scientists will find algorithmic considerations in Chapters 6 and 7, the full justification of which may be found in Chapters 2 and 4 respectively. Lastly, all readers can learn more about the motivation for this work in the image processing applications presented in Chapter 8...

  18. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. Curry

    2001-06-26

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the Yucca Mountain Site Characterization Project Requirements Document (YMP RD) (YMP 2001a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M&O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  19. Monitored Geologic Repository Project Description Document

    Energy Technology Data Exchange (ETDEWEB)

    P. M. Curry

    2001-01-30

    The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing for the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).

  20. LARYNGEAL MALIGNANCY: A RETROSPECTIVE DESCRIPTIVE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Vinod Kumar

    2016-06-01

    Full Text Available BACKGROUND Laryngeal cancer is the second most common head and neck cancer in India. The onset, rate of progression and duration of symptoms are variable for supraglottic, glottic and subglottic cancer. Smoking and alcohol are also most important risk factors for laryngeal cancer. Data regarding cases of laryngeal cancer in relation to age, sex, symptoms and signs, aetiological factors with special reference to smoking and alcohol, histopathological types, tumour staging, treatment and outcomes are important to assess changing trends in laryngeal cancer treatment. MATERIALS AND METHODS This study is about retrospective descriptive analysis of diagnosed and treated cases of laryngeal cancer in the Department of ENT from 2005 to 2008. Total fifty patients with laryngeal malignancy were seen from May 2005 to May 2008 with average 1 year of follow-up. Data regarding cases of laryngeal cancer in relation to age, sex, symptoms and signs, aetiological factors with special reference to smoking and alcohol, histopathological types, tumour staging, treatment and outcomes were analysed using SPSS software. All patients who were diagnosed to have laryngeal cancer and treated were included in the study. RESULTS In this descriptive analysis, 62% patients are between 51-70 years. Most of the patients had been symptomatic for 3-5 months; 58% patients presented with voice change followed by other complaints like throat pain, foreign body sensation, otalgia, breathing difficulty. Voice change was distinctly the most common symptom regardless of tumour site. It was more prevalent in glottis cases, but it was also the leading symptom in supraglottic tumours. Glottis tumours were more often found at an early stage and patients with a supraglottic tumour presented more often with neck node metastasis. CONCLUSION Laryngeal malignancy is one of the head and neck malignancies, which are more common in males. Tobacco is an important risk factor in causation of the

  1. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  2. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  3. A New Topological Description Method of Kinematic Chain

    Institute of Scientific and Technical Information of China (English)

    Ding Huafeng; Huang Zhen; Cao Yi

    2004-01-01

    This paper presents a novel method for the description of kinematic chains, namely the canonical description of kinematic chains including the synthetic degree-sequences and the canonical adjacency matrices sets of kinematic chains. The most important characteristic of this new description method is its uniqueness. Based on the new principle the isomorphism identification becomes easy and the structures of all kinds of kinematic chains can be stored in computer for the benefits of the realization of automation and intelligence of machine design.

  4. Hot Spot Removal System: System description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

  5. Symplectic map description of Halley's comet dynamics

    CERN Document Server

    Haag, P; Lages, J

    2014-01-01

    The main features of 1P/Halley chaotic dynamics can be described by a two dimensional symplectic map. Using Mel'nikov integral we semi-analytically determine such a map for 1P/Halley taking into account gravitational interactions from the Sun and the eight planets. We determine the Solar system kick function ie the energy transfer to 1P/Halley along one passage through the Solar system. Our procedure allows to compute for each planet its contribution to the Solar system kick function which appears to be the sum of the Keplerian potential of the planet and of a rotating circular gravitational dipole potential due to the Sun movement around Solar system barycenter. We test the robustness of the symplectic Halley map by directly integrating Newton's equations over $\\sim 2.4\\cdot 10^4$ yr around Y2K and by reconstructing the Solar system kick function. Our results show that the Halley map with fixed parameters gives a reliable description of comet dynamics on time scales of $10^4$ yr while on a larger scales the ...

  6. New science teachers' descriptions of inquiry enactment

    Science.gov (United States)

    Dreon, Oliver, Jr.

    This phenomenological study demonstrates the influence that affective factors have on beginning teachers' ability to enact instructional practices. Through narratives shared in interviews and web log postings, two beginning science teachers' emotional engagement with their instructional practices, especially that of implementing inquiry-based instruction, and the resulting impact these emotions had on professional decision-making were evidenced. Anxiety emerged as the most significant impacting emotion on instructional decision-making with the participants. Through their stories, the two participants describe how their emotions and views of self influence whether they continue using inquiry pedagogy or alter their lesson to adopt more didactic means of instruction. These emotions arise from their feelings of being comfortable teaching the content (self-efficacy), from the unpredictability of inquiry lessons (control beliefs), from how they perceive their students as viewing them (teacher identity) and from various school constraints (agency). This research also demonstrates how intertwined these aspects are, informing each other in a complex, dialectical fashion. The participants' self-efficacy and professional identity emerge from their interactions with the community (their students and colleagues) and the perceived agency afforded by their schools' curricula and administration. By providing descriptions of teachers' experiences enacting inquiry pedagogy, this study expands our understanding of factors that influence teachers' instructional practices and provides a basis for reforming science teacher preparation.

  7. Fourier coefficient description of left ventricular shape.

    Science.gov (United States)

    Round, W H; Bates, R H; Ikram, H

    1991-12-01

    A method of quantifying the shape of the left ventricle of the heart as seen in 2D echocardiograms was developed. It is based on describing the shape in terms of the coefficients a fifth-order trigonometric Fourier series. Such a series has eleven Fourier coefficients which is too large a number for clinical application so pairs of coefficients are combined to give six coefficients (alpha 0, alpha 1, ... , alpha 5). A trial was conducted to test the ability of the coefficient description to classify subjects as having normal right ventricles or ventricles with an apical abnormality. The tests showed that one of the coefficients (alpha 2) was higher for the subjects with an apical abnormality and that this difference increased with exercise. This is as was expected. However, it was found to be difficult to get a reliable estimate of alpha 2 from a single scan of a patient and that it is therefore probably necessary to average data from several scans to obtain a reliable alpha 2 value for a single patient.

  8. Optical Hall effect-model description: tutorial.

    Science.gov (United States)

    Schubert, Mathias; Kühne, Philipp; Darakchieva, Vanya; Hofmann, Tino

    2016-08-01

    The optical Hall effect is a physical phenomenon that describes the occurrence of magnetic-field-induced dielectric displacement at optical wavelengths, transverse and longitudinal to the incident electric field, and analogous to the static electrical Hall effect. The electrical Hall effect and certain cases of the optical Hall effect observations can be explained by extensions of the classic Drude model for the transport of electrons in metals. The optical Hall effect is most useful for characterization of electrical properties in semiconductors. Among many advantages, while the optical Hall effect dispenses with the need of electrical contacts, electrical material properties such as effective mass and mobility parameters, including their anisotropy as well as carrier type and density, can be determined from the optical Hall effect. Measurement of the optical Hall effect can be performed within the concept of generalized ellipsometry at an oblique angle of incidence. In this paper, we review and discuss physical model equations, which can be used to calculate the optical Hall effect in single- and multiple-layered structures of semiconductor materials. We define the optical Hall effect dielectric function tensor, demonstrate diagonalization approaches, and show requirements for the optical Hall effect tensor from energy conservation. We discuss both continuum and quantum approaches, and we provide a brief description of the generalized ellipsometry concept, the Mueller matrix calculus, and a 4×4 matrix algebra to calculate data accessible by experiment. In a follow-up paper, we will discuss strategies and approaches for experimental data acquisition and analysis.

  9. Applications the Lagrangian description in aperiodic flows

    Science.gov (United States)

    Mendoza, Carolina; Mancho, Ana Maria

    2012-11-01

    We use several recently developed Lagrangian tools for describing transport in general aperiodic flows. In our approach the first step is based in a Lagrangian descriptor (the so called function M). It measures the length of particle trajectories on the ocean surface over a given interval of time. We describe its output over satellite altimetry data on the Kuroshio current. The technique is combined with the direct computation of manifolds of Distinguished Hyperbolic trajectories and a very detailed description of transport is achieved across an eddy and a jet on the Kuroshio current,. A second velocity data set is examined with the M function tool. These are obtained from the HYCOM project on the Gulf of Mexico during the time of the oil-spill. We have identified underlying Lagrangian structures and dynamics. We acknowledge to the hospitality of the university of Delaware and the assistance of Bruce Lipphardt and Helga Huntley in accessing the model data sets. We acknowledge to the grants: UPM-AL12-PAC-09, Becas de Movilidad de Caja Madrid 2011, MTM2011-26696 and ILINK-0145.

  10. Hamiltonian Description of Multi-fluid Streaming

    Science.gov (United States)

    Valls, C.; de La Llave, R.; Morrison, P. J.

    2001-10-01

    The general noncanonical Hamiltonian description of interpenetrating fluids coupled by electrostatic, gravitational, or other forces is presented. This formalism is used to describe equilibrium and nonlinear stability using techniques of Hamiltonian dynamics theory. For example, we study the stability of two warm counter-streaming electron beams in a neutralizing ion background. The normal modes are obtained from an energy functional by computing the lowest-order expression for the perturbed energy about an equilibrium, and transforming the corresponding system into action-angle variables. Higher-order terms in the Hamiltonian provide coupling between normal modes and can lead to instability because of the presence of negative energy modes (NEM's). (The signature of the NEM's is determined by the signature of the Hamiltonian, Moser's bracket definition, or the conventional plasma definition in terms of the dielectric function, all of which are shown to be equivalent.) The possible nonlinear behavior is discovered by constructing the Birkhoff normal form. Accounting for resonances, we transform away terms in the Hamiltonian to address the question of long-time stability for such systems.

  11. Chiropractic and CAM Utilization: A Descriptive Review

    Directory of Open Access Journals (Sweden)

    Meeker William C

    2007-01-01

    Full Text Available Abstract Objective To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions Data Sources A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. Data Selection A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Data Synthesis Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Results Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Conclusion Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

  12. Biological and phytopharmacological descriptions of Litchi chinensis

    Directory of Open Access Journals (Sweden)

    Eswar Kumar Kilari

    2016-01-01

    Full Text Available Plants remain a vital source of drugs and at present, much emphasis is given to nutraceuticals. Herbal medicines have been the basis of treatment and cure for various diseases and physiological conditions in the traditional methods practiced such as ayurveda and homeopathy. Litchi chinensis belongs to the Sapindaceae family and is well-known in the Indian traditional system for its traditional uses. The parts of the plant used are leaves, flowers, fruits, seed, pulp, and pericarp. All parts of the plant are rich sources of phytochemicals––epicatechin; procyanidin A2 and procyanidin B2; leucocyanidin; cyanidin glycoside, malvidin glycoside, and saponins; butylated hydroxytoluene; isolariciresinol; kaempferol; rutin; and stigmasterol. In the present review, we explore the lychee's description, traditional medicinal uses, and phytoconstituents, and investigate the pharmacological activities in various parts of the lychee to show its importance in ethanopharmacology. This is so that this review can serve as a ready-to-use material for further research on the plant.

  13. Logistic description of investment and construction management

    Directory of Open Access Journals (Sweden)

    Sborshchikov Sergey Borisovich

    2014-01-01

    Full Text Available The article is devoted to the questions of defining dynamic behavior of investment and construction activity as a technical and economic system and its formalized description. It is offered to use the term "condition vector" as one of the main characteristics while describing investment and construction activity. Logistic interpretation of a sustainable development of investment and construction defines the concept of optimum trajectory, which considers various dependencies of its components (construction operations, their preparation, design, material, technique, personnel, information, investment, etc.. It is necessary to point out that this state is homeostatic, which means, the managing system must provide continuous monitoring of each system component of investment and construction activities in accordance with the sustainable development pathway. The concept of dynamic balance used in logistics is identical to the concept of homeostatic balance, which is accepted in system engineering. It is defined as a property of technical and economic system, which implies that its deviations from the development pathway lie within admissible values.

  14. A fully covariant description of CMB anisotropies

    CERN Document Server

    Dunsby, P K S

    1997-01-01

    Starting from the exact non-linear description of matter and radiation, a fully covariant and gauge-invariant formula for the observed temperature anisotropy of the cosmic microwave background (CBR) radiation, expressed in terms of the electric ($E_{ab}$) and magnetic ($H_{ab}$) parts of the Weyl tensor, is obtained by integrating photon geodesics from last scattering to the point of observation today. This improves and extends earlier work by Russ et al where a similar formula was obtained by taking first order variations of the redshift. In the case of scalar (density) perturbations, $E_{ab}$ is related to the harmonic components of the gravitational potential $\\Phi_k$ and the usual dominant Sachs-Wolfe contribution $\\delta T_R/\\bar{T}_R\\sim\\Phi_k$ to the temperature anisotropy is recovered, together with contributions due to the time variation of the potential (Rees-Sciama effect), entropy and velocity perturbations at last scattering and a pressure suppression term important in low density universes. We a...

  15. Ferrofluids, complex particle dynamics and braid description

    Energy Technology Data Exchange (ETDEWEB)

    Skjeltorp, A.T. E-mail: arne.skjeltorp@ife.no; Clausen, Sigmund; Helgesen, Geir

    2001-05-01

    Finely divided magnetic matter is important in many areas of science and technology. A special sub-class of systems are made up of freely moving particles suspended in a carrier liquid where the magnetic interactions play an important role in the actual structure formation and dynamical behaviour. These include ferrofluids, which are colloids of magnetic particles dispersed in carrier fluids, magnetic micro-beads, which are micrometer sized plastic beads loaded with iron oxide, and nonmagnetic particles dispersed in ferrofluids, forming the so-called 'magnetic holes'. How, in a simple and forceful way, is it possible to characterise the dynamics of systems with several moving components like dispersed magnetic particles subjected to external magnetic fields? The methods based on the theory of braids may provide the answer. Braid theory is a sub-field of mathematics known as topology. It involves classifying different ways of tracing curves in space. The topological description of braids thus provides a simple and concise language for describing the dynamics of a system of moving particles as if they perform a complicated dance as they move about one another, and the braid encodes the choreography of this dance.

  16. Transmutation Fuel Campaign Description and Status

    Energy Technology Data Exchange (ETDEWEB)

    Jon Carmack; Kemal O. Pasamehmetoglu

    2008-01-01

    This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series oftechnical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, highlevel schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: • An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. • A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities.

  17. Colony collapse disorder: a descriptive study.

    Directory of Open Access Journals (Sweden)

    Dennis Vanengelsdorp

    Full Text Available BACKGROUND: Over the last two winters, there have been large-scale, unexplained losses of managed honey bee (Apis mellifera L. colonies in the United States. In the absence of a known cause, this syndrome was named Colony Collapse Disorder (CCD because the main trait was a rapid loss of adult worker bees. We initiated a descriptive epizootiological study in order to better characterize CCD and compare risk factor exposure between populations afflicted by and not afflicted by CCD. METHODS AND PRINCIPAL FINDINGS: Of 61 quantified variables (including adult bee physiology, pathogen loads, and pesticide levels, no single measure emerged as a most-likely cause of CCD. Bees in CCD colonies had higher pathogen loads and were co-infected with a greater number of pathogens than control populations, suggesting either an increased exposure to pathogens or a reduced resistance of bees toward pathogens. Levels of the synthetic acaricide coumaphos (used by beekeepers to control the parasitic mite Varroa destructor were higher in control colonies than CCD-affected colonies. CONCLUSIONS/SIGNIFICANCE: This is the first comprehensive survey of CCD-affected bee populations that suggests CCD involves an interaction between pathogens and other stress factors. We present evidence that this condition is contagious or the result of exposure to a common risk factor. Potentially important areas for future hypothesis-driven research, including the possible legacy effect of mite parasitism and the role of honey bee resistance to pesticides, are highlighted.

  18. Constituent quark model description of charmonium phenomenology

    CERN Document Server

    Segovia, J; Fernandez, F; Hernandez, E

    2013-01-01

    We review how quark models are able to describe the phenomenology of the charm meson sector. The spectroscopy and decays of charmonium and open charm mesons are described in a particular quark model and compared with the data and the results of other existing models in the literature. A quite reasonable global description of the heavy meson spectra is reached. A new assignment of the $\\psi(4415)$ resonance as a 3D state leaving aside the 4S state to the X(4360) is tested through the analysis of the resonance structure in $e^{+}e^{-}$ exclusive reactions around the $\\psi(4415)$ energy region. We make tentative assignments of some of the $XYZ$ mesons. To elucidate the structure of the $1^{+}$ $c\\bar{s}$ states, i.e. $D_{s1}(2460)$ and $D_{s1}(2536)$, we study the strong decay properties of the $D_{s1}(2536)$ meson. We also perform a calculation of the branching fractions for the semileptonic decays of $B$ and $B_{s}$ mesons into final states containing orbitally excited charmed and charmed-strange mesons, which...

  19. Class II malocclusion occlusal severity description

    Directory of Open Access Journals (Sweden)

    Guilherme Janson

    2010-08-01

    Full Text Available OBJECTIVES: It is well known that the efficacy and the efficiency of a Class II malocclusion treatment are aspects closely related to the severity of the dental anteroposterior discrepancy. Even though, sample selection based on cephalometric variables without considering the severity of the occlusal anteroposterior discrepancy is still common in current papers. In some of them, when occlusal parameters are chosen, the severity is often neglected. The purpose of this study is to verify the importance given to the classification of Class II malocclusion, based on the criteria used for sample selection in a great number of papers published in the orthodontic journal with the highest impact factor. MATERIAL AND METHODS: A search was performed in PubMed database for full-text research papers referencing Class II malocclusion in the history of the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO. RESULTS: A total of 359 papers were retrieved, among which only 72 (20.06% papers described the occlusal severity of the Class II malocclusion sample. In the other 287 (79.94% papers that did not specify the anteroposterior discrepancy severity, description was considered to be crucial in 159 (55.40% of them. CONCLUSIONS: Omission in describing the occlusal severity demands a cautious interpretation of 44.29% of the papers retrieved in this study.

  20. Embedding Description Logic Programs into Default Logic

    CERN Document Server

    Wang, Yisong; Yuan, Li Yan; Shen, Yi-Dong; Eiter, Thomas

    2011-01-01

    Description logic programs (dl-programs) under the answer set semantics formulated by Eiter {\\em et al.} have been considered as a prominent formalism for integrating rules and ontology knowledge bases. A question of interest has been whether dl-programs can be captured in a general formalism of nonmonotonic logic. In this paper, we study the possibility of embedding dl-programs into default logic. We show that dl-programs under the strong and weak answer set semantics can be embedded in default logic by combining two translations, one of which eliminates the constraint operator from nonmonotonic dl-atoms and the other translates a dl-program into a default theory. For dl-programs without nonmonotonic dl-atoms but with the negation-as-failure operator, our embedding is polynomial, faithful, and modular. In addition, our default logic encoding can be extended in a simple way to capture recently proposed weakly well-supported answer set semantics, for arbitrary dl-programs. These results reinforce the argument ...

  1. Improved motion description for action classification

    Directory of Open Access Journals (Sweden)

    Mihir eJain

    2016-01-01

    Full Text Available Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e.: camera and scene motion, significantly improves action recognition algorithms. This holds true both for the extraction of the space-time trajectories and for computation of descriptors.We designed a new motion descriptor – the DCS descriptor – that captures additional information on local motion patterns enhancing results based on differential motion scalar quantities, divergence, curl and shear features. Finally, applying the recent VLAD coding technique proposed in image retrieval provides a substantial improvement for action recognition. These findings are complementary to each other and they outperformed all previously reported results by a significant margin on three challenging datasets: Hollywood 2, HMDB51 and Olympic Sports as reported in (Jain et al. (2013. These results were further improved by (Oneata et al. (2013; Wang and Schmid (2013; Zhu et al. (2013 through the use of the Fisher vector encoding. We therefore also employ Fisher vector in this paper and we further enhance our approach by combining trajectories from both optical flow and compensated flow. We as well provide additional details of DCS descriptors, including visualization. For extending the evaluation, a novel dataset with 101 action classes, UCF101, was added.

  2. Who's minding the charge description master?

    Science.gov (United States)

    Schaum, Kathleen D

    2011-11-01

    Just as it takes a team to manage chronic wounds, it takes a team to maintain the CDM. The technical staff from the wound care department should be represented on this team and should share the appropriate HCPCS codes and CPT codes, product descriptions, and costs for all procedures, services, supplies, drugs, and biologics used in their department. The billing department should ensure that the appropriate revenue codes for each payer are listed for each item on the CDM. Based on costs supplied by the wound care department, the finance department should consistently assign hospital charges to each line item on the CDM. The information technology department is responsible for making the specific changes to the CDM in the computer system. Most hospitals have a CDM coordinator. The technical staff from the wound care department should work closely with the CDM coordinator and should obtain from him/her the policies and procedures for maintaining the wound care department CDM. Most CDM coordinators will also provide a CDM Change Request Form. Use that form each year when the hospital is performing its annual CDM maintenance and throughout the year to add procedures, services, supplies, drugs, or biologics to your wound care offerings and/or when the cost for these offerings change.

  3. Semantic annotation of morphological descriptions: an overall strategy

    Directory of Open Access Journals (Sweden)

    Cui Hong

    2010-05-01

    Full Text Available Abstract Background Large volumes of morphological descriptions of whole organisms have been created as print or electronic text in a human-readable format. Converting the descriptions into computer- readable formats gives a new life to the valuable knowledge on biodiversity. Research in this area started 20 years ago, yet not sufficient progress has been made to produce an automated system that requires only minimal human intervention but works on descriptions of various plant and animal groups. This paper attempts to examine the hindering factors by identifying the mismatches between existing research and the characteristics of morphological descriptions. Results This paper reviews the techniques that have been used for automated annotation, reports exploratory results on characteristics of morphological descriptions as a genre, and identifies challenges facing automated annotation systems. Based on these criteria, the paper proposes an overall strategy for converting descriptions of various taxon groups with the least human effort. Conclusions A combined unsupervised and supervised machine learning strategy is needed to construct domain ontologies and lexicons and to ultimately achieve automated semantic annotation of morphological descriptions. Further, we suggest that each effort in creating a new description or annotating an individual description collection should be shared and contribute to the "biodiversity information commons" for the Semantic Web. This cannot be done without a sound strategy and a close partnership between and among information scientists and biologists.

  4. Conformal radiotherapy of prostate carcinoma: Procedure description

    Directory of Open Access Journals (Sweden)

    Erak Marko

    2011-01-01

    Full Text Available Introduction. Today, three-dimensional conformal radiotherapy is a standard way in the radical treatment of localized prostate cancer, and it is an alternative to the radical prostatectomy. This method of radiotherapy treatment is widely accepted in the treatment of prostate cancer patients, and provides irradiation of targeted volume (prostate, seminal vesicles with dose escalation sparing the surrounding healthy tissues (rectum, bladder at the same time. That is not possible with the conventional twodimension technique. Procedure description. Three-dimensional conformal radiotherapy is a volumetric, visual simulation according to the computed tomography slices; it defines the tumour and organ at risk individually in each patient. Results of several studies have shown that there is a significant decrease in the development of acute toxicity when prostate cancer patients are treated with conformal radiotherapy. High dose irradiation gives excellent results in treatment of localized prostate carcinoma and improves treatment results in the patients with locally advanced carcinoma of prostate. Discussion. Prostate carcinoma irradiation techniques have been changed dramatically during recent years. Data obtained by computed tomography are important since the size and shapes of the prostate as well as its anatomic relations towards the rectum and bladder are considerably different in individual patients. The three-dimension plan of irradiation can be designed for each patient individually by performing computed tomography technique when planning radiotherapy. Conclusion. The advanced planning systems for conformal radiotherapy can reconstruct the anatomic structures of pelvis in three-dimension technique on the basis of computed tomography scans, which provides better conformality between the irradiation beam and geometrical shape of the tumour with minimal irradiation of the surrounding healthy tissue.

  5. St. James marine terminal facility description

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The US Department of Energy (DOE) currently owns and operates a marine terminal on the west bank of the Mississippi River at St. James, Louisiana. The St. James facility was constructed by the Department to provide marine services associated with the fill and drawdown of the Strategic Petroleum Reserve (SPR) crude oil storage facilities located at Bayou Choctaw and Weeks Island, Louisiana. Although strategic to the mission of the SPR in the event of a national emergency, the St. James terminal is situated such that it has a high potential to also serve the commercial industry`s needs for crude oil terminalling and storage. The St. James terminal is located approximately 45 miles west of New Orleans and 30 miles southeast of Baton Rouge, and approximately 160 miles upstream from the mouth of the Mississippi River. Construction of the St. James terminal was initiated in 1978 and was completed in 1980. Since then, the terminal has received and transferred over 125 million barrels of crude oil to the SPR sites for storage. For crude oil distribution, the St. James terminal was connected to the neighboring LOCAP terminal by a 0.1 mile 36-inch pipeline in 1981 and to the Capline terminal by a 0.5 mile 30-inch pipeline in 1988. The terminal also has a 30-inch pipeline connection to the Koch oil terminal which was used for initial fill purposes; however, this pipeline has been disconnected and is currently inactive. A complete description of the St. James terminal facilities, operational capabilities, operational certifications, and future Government requirements are presented in Sections 2, 3, 4, and 5 respectively.

  6. Descriptive epidemiology of selected olfactory tumors.

    Science.gov (United States)

    Villano, J Lee; Bressler, Linda; Propp, Jennifer M; Valyi-Nagy, Tibor; Martin, Iman K; Dolecek, Therese A; McCarthy, Bridget J

    2010-10-01

    Olfactory tumors, especially olfactory neuroblastomas (ON) and carcinomas with neuroendocrine differentiation (CND), are extremely rare, and little descriptive epidemiologic information is available. The objective of this study was to more fully describe selected olfactory tumors using a large population-based cancer incidence database. The Surveillance, Epidemiology and End Results (SEER) 9 registries limited-use data were reviewed from 1973 to 2006 for selected nasal cavity (C30.0) and accessory sinus (C31.0-31.9) tumors. Frequencies, incidence rates, and relative survival rates were estimated using SEER*Stat, v6.5.2. The majority of cases were squamous cell carcinoma (SCC), while the incidence of ON was greater than CND. For ON, the incidence was highest in the 60-79 year age group, while for SCC, the incidence was highest in the 80+ year age group. For CND, the incidence leveled off in the oldest age groups. Survival rates were highest for ON (>70% alive at 5 years after diagnosis) and poorest for CND (44% alive at 5 years). Adjuvant radiation therapy did not improve survival over surgery alone in ON. In SCC, survival was worse in patients who received adjuvant radiation compared to patients who had surgery alone. Our analysis confirms some previously published information, and adds new information about the incidence and demographics of ON and CND. In addition, our analysis documents the lack of benefit of adjuvant radiation in ON. It is not feasible to conduct prospective trials in patients with these rare diseases, and the importance of registry data in learning about olfactory tumors is emphasized.

  7. Health leaders of tomorrow: a descriptive analysis.

    Science.gov (United States)

    Levey, L M; Lane, M S; Baretich, M; Levey, S

    1989-01-01

    The dramatically changing environment of the health care executive prompted the current survey of graduate students in health administration. The survey examined the types of attitudes and values that may influence students' future leadership style and ethical decision making. A self-administered questionnaire was designed to provide descriptive information as well as to allow comparisons with recent surveys of practitioners and peers and with other research. Respondents to the survey, conducted in the fall of 1986, included nearly half of the full-time students in 56 participating AUPHA graduate programs and one-quarter of the part-time students (N = 1,764). Students' characteristics such as age, sex, religious preference, work experience, and career aspirations were assessed in relation to their social philosophy on health issues, instrumental and terminal values, attitudes toward achievement, and degree of idealism versus relativism in moral reasoning. The typical student was a twenty-seven-year-old white female with a stated religious preference who expected in ten years to be associated with a multi-institutional system or consulting firm. Her social philosophy showed concern for the rising cost of health care on the consumer and an emphasis on self-help. Self-respect and honesty are her highest values; her ethical ideology had components of high idealism and relativism, which is indicative of a situational decision-making style. Work orientation and mastery were both above average sources of achievement motivation for her, whereas competitiveness was about average. When group differences in attitudes and values were evaluated, however, sex was the highest predictor, followed by age, expectation of becoming a CEO, and self-assessed potential for success. Although there was substantial agreement between students' and practitioners' attitudes and values, some differences were found. Implications for future research are discussed, as well as issues relating to

  8. How descriptive menu labels influence attitudes and repatronage

    NARCIS (Netherlands)

    Wansink, B.; Painter, J.; Ittersum, van K.

    2002-01-01

    How do descriptive menu labels influence customers? In a six-week field experiment involving 140 customers, descriptive menu labels (such as "Grandma's zucchini cookies" or "succulent Italian seafood filet") increased sales by 27% and improved attitudes towards the food, attitudes towards the restau

  9. 42 CFR 84.250 - Vinyl chloride respirators; description.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Vinyl chloride respirators; description. 84.250... Respirators § 84.250 Vinyl chloride respirators; description. Vinyl chloride respirators, including all... escape from vinyl chloride atmospheres containing adequate oxygen to support life, are...

  10. "Library Trends" Past and Present: A Descriptive Study.

    Science.gov (United States)

    Auld, Lawrence W. S.

    1988-01-01

    This analysis of "Library Trends" from 1952-86 provides an overall description of authorship and subject content, general comparison of early and late volumes, and more detailed descriptions--including citation analysis--of the three pairs of issues bearing identical titles. Tables present data on authorship, subjects, and citations. (1 reference)…

  11. 31 CFR 601.2 - Description of paper.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Description of paper. 601.2 Section... ENGRAVING AND PRINTING, DEPARTMENT OF THE TREASURY DISTINCTIVE PAPER FOR UNITED STATES CURRENCY AND OTHER SECURITIES § 601.2 Description of paper. The paper utilized in the printing of United States currency...

  12. User-oriented Understanding of Descriptive, Proscriptive and Prescriptive Lexicography

    DEFF Research Database (Denmark)

    Bergenholtz, Henning

    2003-01-01

    There is much uncertainty and confusion as to the real differences between prescrip-tive and descriptive dictionaries. In general, the majority of existing accounts can be summarised as follows: Descriptive relates to the empirical basis; accordance between the empirical data and the dictionary i...

  13. A paradox in the global description of the multiverse

    Energy Technology Data Exchange (ETDEWEB)

    Bousso, Raphael [Center for Theoretical Physics, Department of Physics, University of California, Berkeley, CA 94720-7300 (United States); Freivogel, Ben [Center for Theoretical Physics, Department of Physics, University of California, Berkeley, CA 94720-7300 (United States)

    2007-06-15

    We use an argument by Page to exhibit a paradox in the global description of the multiverse: the overwhelming majority of observers arise from quantum fluctuations and not by conventional evolution. Unless we are extremely atypical, this contradicts observation. The paradox does not arise in the local description of the multiverse, but similar arguments yield interesting constraints on the maximum lifetime of metastable vacua.

  14. 42 CFR 84.190 - Chemical cartridge respirators: description.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Chemical cartridge respirators: description. 84.190... Cartridge Respirators § 84.190 Chemical cartridge respirators: description. (a) Chemical cartridge respirators including all completely assembled respirators which are designed for use as...

  15. 42 CFR 84.130 - Supplied-air respirators; description.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Supplied-air respirators; description. 84.130... Respirators § 84.130 Supplied-air respirators; description. Supplied-air respirators, including all completely assembled respirators designed for use as respiratory protection during entry into and escape...

  16. 48 CFR 214.202-5 - Descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or...

  17. Adding Curvature to Minimum Description Length Shape Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik; Ólafsdóttir, Hildur

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling seeks a compact description of a set of shapes in terms of the coordinates of marks on the shapes. It has been shown that the mark positions resulting from this optimisation to a large extent solve the so-called point correspondence...

  18. Improved Multiple Descriptions Sinusoidal Coder Adaptive to Packet Loss Rate

    Institute of Scientific and Technical Information of China (English)

    LANG Yue; WANG Jing; ZHAO Sheng-hui; KUANG Jing-ming

    2008-01-01

    To make the multiple descriptions codec adaptive to the packet loss rate, which can minimize the final distortion, a novel adaptive multiple descriptions sinusoidal coder (AMDSC) is proposed, which is based on a sinusoidal model and a noise model. Firstly, the sinusoidal parameters are extracted in the sinusoidal model, and ordered in a decrease manner. Odd indexed and even indexed parameters are divided into two descriptions. Secondly, the output vector from the noise model is split vector quantized. And the two sub-vectors are placed into two descriptions too. Finally, the number of the extracted parameters and the redundancy between the two descriptions are adjusted according to the packet loss rate of the network. Analytical and experimental results show that the proposed AMDSC outperforms existing MD speech coders by taking network loss characteristics into account. Therefore, it is very suitable for unreliable channels.

  19. Generic-Model-Based Description Scheme for MPEG-7

    Institute of Scientific and Technical Information of China (English)

    Deng Juan; Tan Hut; Chen Xin-meng

    2004-01-01

    We propose a new description scheme for MPEG7-: Generic-model-based Description Scheme to describe contents of audio, video, text and other sorts of multimedia.It uses a generic model as the description frame, which provides a simple but useful object-based structure. The main components of the description scheme are generic model, objects and object fcatures. The proposed description scheme is illustrated and exemplified by Extensible Markup Language.It aims at clarity and flexibility to support MPEG-7 applications such as query and edit. We demonstrate its feasibility and efficiency by presenting applications: Digital Broadcasting and Edit System (DEBS) and Non-linear Edit System (NLES) that already used the generic structure or will greatly benefit from it.

  20. DOE-RL Integrated Safety Management System Description

    CERN Document Server

    Shoop, D S

    2000-01-01

    The purpose of this Integrated Safety Management System Description (ISMSD) is to describe the U.S. Department of Energy (DOE), Richland Operations Office (RL) ISMS as implemented through the RL Integrated Management System (RIMS). This ISMSD does not impose additional requirements but rather provides an overview describing how various parts of the ISMS fit together. Specific requirements for each of the core functions and guiding principles are established in other implementing processes, procedures, and program descriptions that comprise RIMS. RL is organized to conduct work through operating contracts; therefore, it is extremely difficult to provide an adequate ISMS description that only addresses RL functions. Of necessity, this ISMSD contains some information on contractor processes and procedures which then require RL approval or oversight. This ISMSD does not purport to contain a full description of the contractors' ISM System Descriptions.

  1. A Corpus-Based Investigation of Definite Description Use

    CERN Document Server

    Poesio, M; Poesio, Massimo; Vieira, Renata

    1997-01-01

    We present the results of a study of definite descriptions use in written texts aimed at assessing the feasibility of annotating corpora with information about definite description interpretation. We ran two experiments, in which subjects were asked to classify the uses of definite descriptions in a corpus of 33 newspaper articles, containing a total of 1412 definite descriptions. We measured the agreement among annotators about the classes assigned to definite descriptions, as well as the agreement about the antecedent assigned to those definites that the annotators classified as being related to an antecedent in the text. The most interesting result of this study from a corpus annotation perspective was the rather low agreement (K=0.63) that we obtained using versions of Hawkins' and Prince's classification schemes; better results (K=0.76) were obtained using the simplified scheme proposed by Fraurud that includes only two classes, first-mention and subsequent-mention. The agreement about antecedents was al...

  2. Precision Departure Release Capability (PDRC) Technology Description

    Science.gov (United States)

    Engelland, Shawn A.; Capps, Richard; Day, Kevin; Robinson, Corissia; Null, Jody R.

    2013-01-01

    Center scheduling tool. The PDRC concept also incorporates earlier NASA and FAA research into automation-assisted CFR coordination. The PDRC concept helps reduce uncertainty by automatically communicating coordinated release times with seconds-level precision enabling TMCs to work with target times rather than windows. NASA has developed a PDRC prototype system that integrates the Center's TMA system with a research prototype Tower decision support tool. A two-phase field evaluation was conducted at NASA's North Texas Research Station (NTX) in Dallas-Fort Worth. The field evaluation validated the PDRC concept and demonstrated reduced release time uncertainty while being used for tactical departure scheduling of more than 230 operational flights over 29 weeks of operations. This paper presents the Technology Description. Companion papers include the Final Report and a Concept of Operations.

  3. Stochastic description of quantum Brownian dynamics

    Science.gov (United States)

    Yan, Yun-An; Shao, Jiushu

    2016-08-01

    such as the dynamical description of quantum phase transition (local- ization) and the numerical stability of the trace-conserving, nonlinear stochastic Liouville equation are outlined.

  4. Chessboard-interpolation-based multiple description video coding

    Institute of Scientific and Technical Information of China (English)

    FAN Chen; CUI Huijuan; TANG Kun

    2004-01-01

    To enhance the robustness of video transmission over noisy channels, this paper presents a multiple description video coding algorithm based on chessboardinterpolation. In the algorithm, the input image is decomposed according to the chessboard pattern, and then interpolated to produce two approximate images with the same resolution. Consequently, the state-of-the-art DCT+MC (Discrete Cosine Transform + Motion Compensation) video codec is independently applied to the two approximate images to generate two descriptions of the original image. In this framework, a fairely good reconstructed image quality is obtained when two descriptions are received simultaneously, while an acceptable reconstructed image quality could be yielded if only one description is available. Moreover, the mismatch between the encoder and the decoder could be effectively controlled through partial coding of the difference signal between two descriptions. In bidirectional video communications, a drift control scheme is further proposed, in which the error drift could be eliminated after the encoder imitating the error concealment actions of the decoder. Since the inherent correlation among adjacent blocks of DCT+MC video coding is efficiently exploited, this algorithm has a better redundancy-rate-distortion (RRD) performance than other multiple description algorithms. Simulation results show that the proposed algorithm is fairly robust while preserves a high compression rate. A more constant reconstructed image quality is achieved over extremely noisy channels, compared with traditional single description coding. In addition, it is observed that the mismatch and the error drift are effectively controlled.

  5. Formative value of descriptive grades in mathematics instruction for beginners

    Directory of Open Access Journals (Sweden)

    Đelić Jasmina

    2016-01-01

    Full Text Available Descriptive grading has been implemented in the first grade of primary school in the Republic of Serbia from 2003. The monitoring of this system novelty has been absent since research community most often dealt with teachers’ attitudes and their self-evaluation of the competences for descriptive grading. This form of grading, which stems from the social constructivist paradigm, is observed as the trigger of development of the formative approach in assessment, which has been in the focus of theoreticians and practitioners in the past thirty years, especially in the United States of America and Great Britain. The method of content analysis was applied to 316 descriptive grades in mathematics given to first grade primary students. The quality of three key elements was assessed: the description of academic achievement, the description of students’ engagement and the recommendations to achieve further progress, as well as the balance of quality between the elements of the same descriptive grade. Research results have shown that descriptive grades mostly lack the necessary formative capacity. This means that the majority of students this sample of grades was prepared for did not receive quality and comprehensive feedback, which would be conducive for their further education. Formative assessment, as one of the implications of the constructivist theoretical grounding, demands a high level of development of teacher competences for monitoring the progress and assessing the students, which has not been confirmed in the present research.

  6. A Unified Semantic Framework for the description of assistive technologies.

    Science.gov (United States)

    Konstadinidou, Aggeliki; Kaklanis, Nikolaos; Votis, Konstantinos; Tzovaras, Dimitrios

    2015-01-01

    This paper presents the Semantic Alignment Tool, a unified, classified, ontological framework, for the description of assistive solutions that comprises information from different sources automatically. The Semantic Alignment Tool is a component of the Cloud4All/GPII infrastructure that enables users to add and/or modify descriptions of assistive technologies and align their specific settings with similar settings in an ontological model based on ISO 9999. The current work presents the interaction of the Semantic Alignment Tool with external sources that contain descriptions and metadata for Assistive Technologies (ATs) in order to achieve their synchronization in the same semantic model.

  7. Applicability of the hydrodynamic description of classical fluids

    CERN Document Server

    Mithen, James P; Gregori, Gianluca

    2010-01-01

    We investigate using numerical simulations the domain of applicability of the hydrodynamic description of classical fluids at and near equilibrium. We find this to be independent of the degree of many-body correlations in the system; the range r_c of the microscopic interactions completely determines the maximum wavenumber k_{max} at which the hydrodynamic description is applicable by k_{max}r_c ~ 0.43. For the important special case of the Coulomb potential of infinite range, we show that the ordinary hydrodynamic description is never valid.

  8. Developing and validating a job description for internship preceptors.

    Science.gov (United States)

    Taie, Eman Salman

    2010-01-01

    A job description is a contract between the employer and the employee, which should outline duties, responsibilities, and reporting relationships. In this study, the author designed a job description for internship preceptors working at Alexandria and El-Mansoura university hospitals and examined its validity. The study sample included all available internship preceptors in the university hospitals and their supervisors. The results of study revealed the various components of the job description. Most of the respondents preferred the job title to be internship preceptor.

  9. Technical description of the Swedish natural gas distribution system

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Ronny [KM Miljoeteknik AB (Sweden)

    1997-06-01

    This description of the Swedish distribution network has been produced to provide information for distribution companies, trade organisations, etc., who have an interest in getting a clear understanding of the technical design and standards, technical directives, etc., which have served as guidance in the development. The technical description covers the piping system from a measuring and regulating station (MR station) up to the consumer`s substation, however, only sections with a maximum operating pressure of 4 bar. By way of introduction, the description contains introductory information on supply channels, consumption patterns and the principal design of the high pressure network in Sweden 10 refs, 10 figs, 1 tab

  10. Human Uniqueness, Cognition by Description, and Procedural Memory

    Directory of Open Access Journals (Sweden)

    John Bolender

    2008-06-01

    Full Text Available Evidence will be reviewed suggesting a fairly direct link between the human ability to think about entities which one has never perceived — here called “cognition by description” — and procedural memory. Cognition by description is a uniquely hominid trait which makes religion, science, and history possible. It is hypothesized that cognition by description (in the manner of Bertrand Russell’s “knowledge by description” requires variable binding, which in turn utilizes quantifier raising. Quantifier raising plausibly depends upon the computational core of language, specifically the element of it which Noam Chomsky calls “internal Merge”. Internal Merge produces hierarchical structures by means of a memory of derivational steps, a process plausibly involving procedural memory. The hypothesis is testable, predicting that procedural memory deficits will be accompanied by impairments in cognition by description. We also discuss neural mechanisms plausibly underlying procedural memory and also, by our hypothesis, cognition by description.

  11. The Role of XML in the CMS Detector Description

    Institute of Scientific and Technical Information of China (English)

    M.Liendl; F.vanLingen; 等

    2001-01-01

    Offline Software such as Simulation,Reconstruction,Analysis,and Visualisation are all in need of a detector description.These applications have several common but also many specific requirements for the detector description in order to build up their internal representations.To achieve this in a consistent and coherent manner a common source of information,the detector description database,will be consulted by each of the applications.The role and suitability of XML in the design of the detector description database in the scope of the CMS detector at the LHC is discussed.Different aspects such as data modelling capabilities of XML,tool support,integration to C++ representations of data models are treated and recent results of prototype implementations are presented.

  12. Arbitrary mechanical system description by a symbolic line

    Science.gov (United States)

    Dmitrochenko, O.; Mikkola, A.; Olshevskiy, A.

    2016-04-01

    A single-line symbolic notation is proposed for description of an arbitrary multibody system. The kinematics is represented by a sequence of elementary transformations, each of those being marked by a reserved alphabetic character. Force and constraint links between the bodies are also defined by reserved characters. The parameters of the system, such as identifiers of degrees of freedom, inertia parameters and others, are assigned default names if not specified. However, user-defined names, parameters and functions can be placed instead if needed. The proposed description in its shortest form is suitable for academic purpose to identify only the essential properties of a multibody system. In an extended form, by explicit mentioning names of variables and parameters and other data like initial conditions, this description can serve as input data for a multibody analysis software. Lots of examples from the academic area and technical applications are given to show the applicability of the description.

  13. USGS Volcanic Activity Alert-Notification System Description

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Website provides plain-English description of the alert notification system that the USGS has adopted nationwide for characterizing the level of unrest and eruptive...

  14. NOAA/NOS and USCGS Seabed Descriptions from Hydrographic Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA/NOS and USCGS Seabed Descriptions from Hydrographic Surveys database is a compilation of surficial sediment composition from multiple sources for over...

  15. Domain Endurants: An Analysis and Description Process Model

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2014-01-01

    We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. ...... claim that both sections, Sects. 2–3, contribute to a methodology of software engineering.......We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. We...

  16. Human hand descriptions and gesture recognition for object manipulation.

    Science.gov (United States)

    Cobos, Salvador; Ferre, Manuel; Sánchez-Urán, M Ángel; Ortego, Javier; Aracil, Rafael

    2010-06-01

    This work focuses on obtaining realistic human hand models that are suitable for manipulation tasks. A 24 degrees of freedom (DoF) kinematic model of the human hand is defined. The model reasonably satisfies realism requirements in simulation and movement. To achieve realism, intra- and inter-finger constraints are obtained. The design of the hand model with 24 DoF is based upon a morphological, physiological and anatomical study of the human hand. The model is used to develop a gesture recognition procedure that uses principal components analysis (PCA) and discriminant functions. Two simplified hand descriptions (nine and six DoF) have been developed in accordance with the constraints obtained previously. The accuracy of the simplified models is almost 5% for the nine DoF hand description and 10% for the six DoF hand description. Finally, some criteria are defined by which to select the hand description best suited to the features of the manipulation task.

  17. HTML Tags as Extraction Cues for Web Page Description Construction

    Directory of Open Access Journals (Sweden)

    Timothy C. Craven

    2003-01-01

    Full Text Available Using four previously identified samples of Web pages containing meta-tagged descriptions, the value of meta-tagged keywords, the first 200 characters of the body, and text marked with common HTML tags as extracts helpful for writing summaries was estimated by applying two measures: density of description words and density of two-word description phrases. Generally, titles and keywords showed the highest densities. Parts of the body showed densities not much different from the body as a whole: somewhat higher for the first 200 characters and for text tagged with "center" and "font"; somewhat lower for text tagged with "a"; not significantly different for "table" and "div". Evidence of non-random clumping of description words in the body of some pages nevertheless suggests that further pursuit of automatic passage extraction methods from the body may be worthwhile. Implications of the findings for aids to summarization, and specifically the TexNet32 package, are discussed.

  18. [General Refuge Description for Sabine National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document contains a brief description of the landscape, objectives, and management of Sabine NWR. A series of refuge photographs is attached.

  19. Production Logistics Simulation Supported by Process Description Languages

    Directory of Open Access Journals (Sweden)

    Bohács Gábor

    2016-03-01

    Full Text Available The process description languages are used in the business may be useful in the optimization of logistics processes too. The process description languages would be the obvious solution for process control, to handle the main sources of faults and to give a correct list of what to do during the logistics process. Related to this, firstly, the paper presents the main features of the frequent process description languages. The following section describes the currently most used process modelling languages, in the areas of production and construction logistics. In addition, the paper gives some examples of logistics simulation, as another very important field of logistics system modelling. The main edification of the paper, the logistics simulation supported by process description languages. The paper gives a comparison of a Petri net formal representation and a Simul8 model, through a construction logistics model, as the major contribution of the research.

  20. Health Topic XML File Description: MedlinePlus

    Science.gov (United States)

    ... Here: Home → Health Topic XML File Description: MedlinePlus URL of this page: https://medlineplus.gov/xmldescription.html ... on MedlinePlus: Not used for the public site. url - the topic URL. The URL for the corresponding ...

  1. The Language of Civil Engineering: Descriptive, Prescriptive, and Persuasive.

    Science.gov (United States)

    Machauf, Liora

    1990-01-01

    Focuses on the language of civil engineering as manifested in the professional journal "Civil Engineering ASCE." Articles are analyzed, both syntactically and lexically, in terms of three major rhetorical functions: description, prescription, and persuasion. (17 references) (GLR)

  2. Generalized double extension and descriptions of qadratic Lie superalgebras

    CERN Document Server

    Bajo, I; Bordemann, M

    2007-01-01

    A Lie superalgebra endowed with a supersymmetric, even, non-degenerate, invariant bilinear form is called a quadratic Lie superalgebra. In this paper we give inductive descriptions of quadratic Lie superalgebras in terms of generalized double extensions.

  3. Transport properties site descriptive model. Guidelines for evaluation and modelling

    Energy Technology Data Exchange (ETDEWEB)

    Berglund, Sten [WSP Environmental, Stockholm (Sweden); Selroos, Jan-Olof [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive

  4. Study on the Product Description Method for Networked Customization

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Networked customization had gradually become one of t he import manufacturing and marketing patterns in the information age. Product d escription had an important effect on realizing networked customization. From th is point of view, this paper firstly analyzed four requirements of adaptability, stability, conciseness and definitude that product description methods for netw orked customization must satisfy. According to these requirements, the paper com mented on current methods of product description, po...

  5. Database Description - RMG | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available [ Credits ] BLAST Search Image Search Home About Archive Update History Contact us RMG Database... Description General information of database Database name RMG Alternative name Rice Mitochondri...ational Institute of Agrobiological Sciences E-mail : Database classification Nucleotide Sequence Databases ...Organism Taxonomy Name: Oryza sativa Japonica Group Taxonomy ID: 39947 Database description This database co...e of rice mitochondrial genome and information on the analysis results. Features and manner of utilization of database

  6. Plutonium Immobilization Project System Design Description for Can Loading System

    Energy Technology Data Exchange (ETDEWEB)

    Kriikku, E.

    2001-02-15

    The purpose of this System Design Description (SDD) is to specify the system and component functions and requirements for the Can Loading System and provide a complete description of the system (design features, boundaries, and interfaces), principles of operation (including upsets and recovery), and the system maintenance approach. The Plutonium Immobilization Project (PIP) will immobilize up to 13 metric tons (MT) of U.S. surplus weapons usable plutonium materials.

  7. 14 CFR 93.81 - Applicability and description of area.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Applicability and description of area. 93... Area § 93.81 Applicability and description of area. The Valparaiso, Florida Terminal Area is designated...°42′51″ N., Longitude 86°38′02″ W.; to Latitude 30°43′18″ N., Longitude 86°27′37″ W.; to Latitude...

  8. PAMS Photo Image Retrieval Prototype System Design Description

    Energy Technology Data Exchange (ETDEWEB)

    Conner, M.L., Westinghouse Hanford

    1996-05-02

    This System Design Description (SDD) documents the detail design of the Photo Audio/Visual Management System (PAMS) Photo Image Retrieval Prototype (PPIRP) subsystem. This SDD shows how the software is structured to satisfy the requirements identified in the PAMS Photo Image Prototype Requirements Document. It is a description of the software structure, software components,interfaces, and data that make up the PPIRP subsystem.

  9. Summary description of the Fast Flux Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Cabell, C.P. (comp.)

    1980-12-01

    This document has been compiled and issued to provide an illustrated engineering summary description of the FFTF. The document is limited to a description of the plant and its functions, and does not cover the extensive associated programs that have been carried out in the fields of design, design analysis, safety analysis, fuels development, equipment development and testing, quality assurance, equipment fabrication, plant construction, acceptance testing, operations planning and training, and the like.

  10. Transitional Description of Diatomic Molecules in U(4) Vibron Model

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xin; PAN Feng

    2004-01-01

    U(3)-O(4) transitional description of diatomic molecules in the U(4) vibron model is studied by using the algebraic Bethe ansatz, in which the O(4) limit is a special case of the theory. Vibrational band-heads of some typical diatornic molecules are fitted by both transitional theory and the O(4) limit within the same framework. The results show that there are evident deviations from the O(4) limit in description of vibrational spectra of some diatomic molecules.

  11. IVOA recommendation: Parameter Description Language Version 1.0

    CERN Document Server

    Zwolf, Carlo Maria; Garrido, Julian; Ruiz, Jose Enrique; Petit, Franck Le

    2015-01-01

    This document discusses the definition of the Parameter Description Language (PDL). In this language parameters are described in a rigorous data model. With no loss of generality, we will represent this data model using XML. It intends to be a expressive language for self-descriptive web services exposing the semantic nature of input and output parameters, as well as all necessary complex constraints. PDL is a step forward towards true web services interoperability.

  12. Design and Implementation of Test Flow Description Language

    Institute of Scientific and Technical Information of China (English)

    MENG Chen; WANG Cheng; YANG Suo-chang

    2009-01-01

    A test flow description language is designed for the description of test flow. The design concept, composition, program structure and syntax structure of statement are presented. The development and impletementation processes of the language are also described. This language is independent of hardware, which can be used for different platforms, and can be extended. The language is used to describe the test flow easily. It simplifies the development process of test software and reduces the difficulty of software maintenance greatly.

  13. Solar One Beam Characterization System design description and requirements document

    Energy Technology Data Exchange (ETDEWEB)

    Blackmon, J.B.

    1986-10-01

    A comprehensive description is provided for the Solar One Beam Characterization System. The principal uses of this system are to provide an automatic measurement of heliostat tracking errors and the optical quality of the reflected image. Measured tracking errors are used to determine bias values for the heliostat control system which compensates for the errors. Detailed descriptions are provided of the hardware, software, supporting analysis, operational sequences, and the fundamental principles involved.

  14. External Description for Multivariable Systems Sampled in an Aperiodic Way

    CERN Document Server

    Fúster-Sabater, Amparo

    2010-01-01

    An external description for nonperiodically sampled multivariable linear systems has been developed. Emphasis is on the sampling period sequence, included among the variables to be handled. The computational procedure is simple and no use of polynomial matrix theory is required. This input/output description is believed to be a basic formulation for its later application to the problem of optimal control and/or identification of linear dynamical systems.

  15. Multiple description video coding based on residuum compensation

    Institute of Scientific and Technical Information of China (English)

    ZHAO AnBang; YU Yun; SUN GuoCang; LI GuanFang; HUI JunYing

    2009-01-01

    As one of the focus areas of robust video coding and transmission, multiple description video coding has attracted comprehensive attention. The low coding efficiency of multiple description video coding is always the major challenge in this field. In order to improve the performance of multiple description video coding, this paper proposes a scheme based on residuum compensation. In this scheme, each original video frame is encoded with a traditional encoder first to get the first description. Then the error residuum of each coded frame is added up to the corresponding original frame and the resulting compensated frame is encoded by another traditional encoder to generate the second description successively. This work uses JM10.0 of H.264/AVC as video coding codec to conduct the experiments. The experimental results show that the proposed scheme has good coding performance. Compared to state of art traditional single description encoder, the efficiency can be as high as 90%, i.e. the redundancy Is only 10% to 20%.

  16. Semantic Web Compatible Names and Descriptions for Organisms

    Science.gov (United States)

    Wang, H.; Wilson, N.; McGuinness, D. L.

    2012-12-01

    Modern scientific names are critical for understanding the biological literature and provide a valuable way to understand evolutionary relationships. To validly publish a name, a description is required to separate the described group of organisms from those described by other names at the same level of the taxonomic hierarchy. The frequent revision of descriptions due to new evolutionary evidence has lead to situations where a single given scientific name may over time have multiple descriptions associated with it and a given published description may apply to multiple scientific names. Because of these many-to-many relationships between scientific names and descriptions, the usage of scientific names as a proxy for descriptions is inevitably ambiguous. Another issue lies in the fact that the precise application of scientific names often requires careful microscopic work, or increasingly, genetic sequencing, as scientific names are focused on the evolutionary relatedness between and within named groups such as species, genera, families, etc. This is problematic to many audiences, especially field biologists, who often do not have access to the instruments and tools required to make identifications on a microscopic or genetic basis. To better connect scientific names to descriptions and find a more convenient way to support computer assisted identification, we proposed the Semantic Vernacular System, a novel naming system that creates named, machine-interpretable descriptions for groups of organisms, and is compatible with the Semantic Web. Unlike the evolutionary relationship based scientific naming system, it emphasizes the observable features of organisms. By independently naming the descriptions composed of sets of observational features, as well as maintaining connections to scientific names, it preserves the observational data used to identify organisms. The system is designed to support a peer-review mechanism for creating new names, and uses a controlled

  17. 2D ArcPIC Code Description: Description of Methods and User / Developer Manual (second edition)

    CERN Document Server

    Sjobak, Kyrre Ness

    2014-01-01

    Vacuum discharges are one of the main limiting factors for future linear collider designs such as that of the Compact LInear Collider (CLIC). To optimize machine efficiency, maintaining the highest feasible accelerating gradient below a certain breakdown rate is desirable; understanding breakdowns can therefore help us to achieve this goal. As a part of ongoing theoretical research on vacuum discharges at the Helsinki Institute of Physics, the build-up of plasma can be investigated through the particle-in-cell method. For this purpose, we have developed the 2D ArcPIC code introduced here. We present an exhaustive description of the 2D ArcPIC code in several parts. In the first chapter, we introduce the particle-in-cell method in general and detail the techniques used in the code. In the second chapter, we describe the code and provide a documentation and derivation of the key equations occurring in it. In the third chapter, we describe utilities for running the code and analyzing the results. The last chapter...

  18. Taxonomy and structure of Persian personality-descriptive trait terms.

    Science.gov (United States)

    Farahani, Mohammad N; De Raad, Boele; Farzad, Valiolla; Fotoohie, Mahmood

    2016-04-01

    We described the development of a taxonomy of Persian personality-descriptive terms in two studies. In Study 1, judges scanned Persian dictionaries and several Persian novels for person-descriptive terms. The resulting set of person-descriptive terms was classified into different categories of description, including the category of dispositional trait-descriptive adjectives. Of the 544 most familiar traits, 126 traits were selected to collect self-ratings. In Study 2, self-ratings were provided by 2400 students. Ratings were factor analysed (Principal Components Analysis) followed by Varimax rotation. Factor structures with two to six factors were discussed. The two-factor structure and the three-factor structure confirm the Big Two and the Big Three, respectively. Of the structures with five and six factors, the five-factor structure appears to be the more appropriate choice, with the factors labelled Morality, Positive versus Negative Emotionality, Achievement, Thoughtfulness and Affection. Gender differences were measured on both the five-factor structure and the six-factor structure. The discussion section emphasised both cross-cultural commonalities and cultural deviations in reference to the Big Five.

  19. Asymmetric Multilevel Diversity Coding and Asymmetric Gaussian Multiple Descriptions

    CERN Document Server

    Mohajer, Soheil; Diggavi, Suhas N

    2009-01-01

    We consider the asymmetric multilevel diversity (A-MLD) coding problem, where a set of $2^K-1$ information sources, ordered in a decreasing level of importance, is encoded into $K$ messages (or descriptions). There are $2^K-1$ decoders, each of which has access to a non-empty subset of the encoded messages. Each decoder is required to reproduce the information sources up to a certain importance level depending on the combination of descriptions available to it. We obtain a single letter characterization of the achievable rate region for the 3-description problem. In contrast to symmetric multilevel diversity coding, source-separation coding is not sufficient in the asymmetric case, and ideas akin to network coding need to be used strategically. Based on the intuitions gained in treating the A-MLD problem, we derive inner and outer bounds for the rate region of the asymmetric Gaussian multiple description (MD) problem with three descriptions. Both the inner and outer bounds have a similar geometric structure t...

  20. General description of circularly symmetric Bessel beams of arbitrary order

    Science.gov (United States)

    Wang, Jia Jie; Wriedt, Thomas; Lock, James A.; Mädler, Lutz

    2016-11-01

    A general description of circularly symmetric Bessel beams of arbitrary order is derived in this paper. This is achieved by analyzing the relationship between different descriptions of polarized Bessel beams obtained using different approaches. It is shown that a class of circularly symmetric Davis Bessel beams derived using the Hertz vector potentials possesses the same general functional dependence as the aplanatic Bessel beams generated using the angular spectrum representation (ASR). This result bridges the gap between different descriptions of Bessel beams and leads to a general description of circularly symmetric Bessel beams, such that the Davis Bessel beams and the aplanatic Bessel beams are merely the two simplest cases of an infinite number of possible circularly symmetric Bessel beams. Additionally, magnitude profiles of the electric and magnetic fields, the energy density and the Poynting vector are displayed for Bessel beams in both paraxial and nonparaxial cases. The results presented in this paper provide a fresh perspective on the description of Bessel beams and cast some insights into the light scattering and light-matter interactions problems in practice.

  1. Formal TCA cycle description based on elementary actions

    Indian Academy of Sciences (India)

    Pierre Mazière; Nicolas Parisey; Marie Beurton-Aimar; Franck Molina

    2007-01-01

    Many databases propose their own structure and format to provide data describing biological processes. This heterogeneity contributes to the difficulty of large systematic and automatic functional comparisons. To overcome these problems, we have used the BioΨ formal description scheme which allows multi-level representations of biological process information. Applied to the description of the tricarboxylic acid cycle (TCA), we show that BioΨ allows the formal integration of functional information existing in current databases and make them available for further automated analysis. In addition such a formal TCA cycle process description leads to a more accurate biological process annotation which takes in account the biological context. This enables us to perform an automated comparison of the TCA cycles for seven different species based on processes rather than protein sequences. From current databases, BioΨ is able to unravel information that are already known by the biologists but are not available for automated analysis tools and simulation software, because of the lack of formal process descriptions. This use of the BioΨ description scheme to describe the TCA cycle was a key step of the MitoScop project that aims to describe and simulate mitochondrial metabolism in silico.

  2. Unbalanced multiple description wavelet coding for scalable video transmission

    Science.gov (United States)

    Choupani, Roya; Wong, Stephan; Tolun, Mehmet

    2012-10-01

    Scalable video coding and multiple description coding are the two different adaptation schemes for video transmission over heterogeneous and best-effort networks such as the Internet. We propose a new method to encode video for unreliable networks with rate adaptation capability. Our proposed method groups three dimensional discrete wavelet transform coefficients in different descriptions and applies a modified embedded zero tree data for rate adaptation. The proposed method optimizes the bit-rates of the descriptions with respect to the channel bit rates and the maximum acceptable distortion. The experimental results in the presence of one description loss indicate that on average the videos at the rate of 1000 Kbit/s are reconstructed with Y-component of peak signal to noise ratio (Y-PSNR) value of 36.2 dB. The dynamic allocation of descriptions to the network channels is optimized for rate distortion minimization. The improvement in term of Y-PSNR achieved by rate distortion optimization has been between 0.7 and 5.3 dB in different bit rates.

  3. Robust Retinal Blood Vessel Segmentation Based on Reinforcement Local Descriptions

    Directory of Open Access Journals (Sweden)

    Meng Li

    2017-01-01

    Full Text Available Retinal blood vessels segmentation plays an important role for retinal image analysis. In this paper, we propose robust retinal blood vessel segmentation method based on reinforcement local descriptions. A novel line set based feature is firstly developed to capture local shape information of vessels by employing the length prior of vessels, which is robust to intensity variety. After that, local intensity feature is calculated for each pixel, and then morphological gradient feature is extracted for enhancing the local edge of smaller vessel. At last, line set based feature, local intensity feature, and morphological gradient feature are combined to obtain the reinforcement local descriptions. Compared with existing local descriptions, proposed reinforcement local description contains more local information of local shape, intensity, and edge of vessels, which is more robust. After feature extraction, SVM is trained for blood vessel segmentation. In addition, we also develop a postprocessing method based on morphological reconstruction to connect some discontinuous vessels and further obtain more accurate segmentation result. Experimental results on two public databases (DRIVE and STARE demonstrate that proposed reinforcement local descriptions outperform the state-of-the-art method.

  4. Irreducible descriptive sets of attributes for information systems

    KAUST Repository

    Moshkov, Mikhail

    2010-01-01

    The maximal consistent extension Ext(S) of a given information system S consists of all objects corresponding to attribute values from S which are consistent with all true and realizable rules extracted from the original information system S. An irreducible descriptive set for the considered information system S is a minimal (relative to the inclusion) set B of attributes which defines exactly the set Ext(S) by means of true and realizable rules constructed over attributes from the considered set B. We show that there exists only one irreducible descriptive set of attributes. We present a polynomial algorithm for this set construction. We also study relationships between the cardinality of irreducible descriptive set of attributes and the number of attributes in S. The obtained results will be useful for the design of concurrent data models from experimental data. © 2010 Springer-Verlag.

  5. Time-dependent density-functional description of nuclear dynamics

    CERN Document Server

    Nakatsukasa, Takashi; Matsuo, Masayuki; Yabana, Kazuhiro

    2016-01-01

    We present the basic concepts and recent developments in the time-dependent density functional theory (TDDFT) for describing nuclear dynamics at low energy. The symmetry breaking is inherent in nuclear energy density functionals (EDFs), which provides a practical description of important correlations at the ground state. Properties of elementary modes of excitation are strongly influenced by the symmetry breaking and can be studied with TDDFT. In particular, a number of recent developments in the linear response calculation have demonstrated their usefulness in description of collective modes of excitation in nuclei. Unrestricted real-time calculations have also become available in recent years, with new developments for quantitative description of nuclear collision phenomena. There are, however, limitations in the real-time approach; for instance, it cannot describe the many-body quantum tunneling. Thus, we treat the quantum fluctuations associated with slow collective motions assuming that time evolution of...

  6. Waste receiving and processing plant control system; system design description

    Energy Technology Data Exchange (ETDEWEB)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  7. Cold fission description with constant and varying mass asymmetries

    Energy Technology Data Exchange (ETDEWEB)

    Duarte, S.B.; Rodriguez, O.; Tavares, O.A.P. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil); Goncalves, M. [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil); Garcia, F.; Guzman, F. [Sao Paulo Univ., SP (Brazil). Inst. de Fisica

    1998-01-01

    Different description for varying the mass asymmetry in the fragmentation process are used to calculate the cold fission barrier penetrability. The relevance of the appropriate choice for both the description of the pre-scission phase and inertia coefficient to unify alpha decay, cluster radioactivity, and spontaneous cold fission processes in the same theoretical framework is explicitly shown. We calculate the half-life of all possible partition modes of nuclei of A > 200 following the most recent Mass Table by Audi and Wapstra. It is shown that if one uses the description in which the mass asymmetry is maintained constant during the fragmentation process, the experimental half-life-values and mass yield of {sup 234} U cold fission are satisfactorily reproduced. (author) 39 refs., 6 figs., 2 tabs.; e-mail: telo at ird.gov.br

  8. A Fuzzy Description Logic with Automatic Object Membership Measurement

    Science.gov (United States)

    Cai, Yi; Leung, Ho-Fung

    In this paper, we propose a fuzzy description logic named f om -DL by combining the classical view in cognitive psychology and fuzzy set theory. A formal mechanism used to determine object memberships automatically in concepts is also proposed, which is lacked in previous work fuzzy description logics. In this mechanism, object membership is based on the defining properties of concept definition and properties in object description. Moreover, while previous works cannot express the qualitative measurements of an object possessing a property, we introduce two kinds of properties named N-property and L-property, which are quantitative measurements and qualitative measurements of an object possessing a property respectively. The subsumption and implication of concepts and properties are also explored in our work. We believe that it is useful to the Semantic Web community for reasoning the fuzzy membership of objects for concepts in fuzzy ontologies.

  9. TYPES OF SCIENTIFIC DESCRIPTIONS IN ROMANIAN GEOGRAPHY TEXTBOOKS

    Directory of Open Access Journals (Sweden)

    VIORICA BLÎNDA

    2012-01-01

    Full Text Available This study will provide a brief look into the numerous aspects of description as a unit of discourse and into the/as well as into those/distinctive discourse methods. The perspectives of the proposed analysis emphasize that description as a unit of discourse is no longer denigrated and that it has regained its well-defined place within the discourse (especially within the discourse of geography as a primary unit of discourse. The analysis is based on a corpus of studies represented by texts of geography available in geography textbooks. Through this study there will be outlined a number of methods and strategies of the discursive process through description.

  10. Mental health case management in Canada: job description analyses.

    Science.gov (United States)

    Forchuk, Cheryl; Ouwerkerk, Alice; Yamashita, Mineko; Martin, Mary-Lou

    2002-01-01

    The purpose of this study was to examine case managers' (CM) job position descriptions through content analysis. There were 29 case manager job position descriptions examined. The job descriptions could be grouped into four categories: (1) what the individuals should bring to the position, (2) what they did as CM, (3) to whom they were accountable, and (4) what was valued. Themes included focus on client as individual, focus on the external/system, or outer-directed work, and the articulation point between the individual and broader system. The CM works directly and indirectly in the system and community through education, organizing, planning, and networking, as well as through provision of direct care to the individual client. The expectations of the positions are extensive.

  11. Learning Content Selection Rules for Generating Object Descriptions in Dialogue

    CERN Document Server

    Jordan, P W; 10.1613/jair.1591

    2011-01-01

    A fundamental requirement of any task-oriented dialogue system is the ability to generate object descriptions that refer to objects in the task domain. The subproblem of content selection for object descriptions in task-oriented dialogue has been the focus of much previous work and a large number of models have been proposed. In this paper, we use the annotated COCONUT corpus of task-oriented design dialogues to develop feature sets based on Dale and Reiters (1995) incremental model, Brennan and Clarks (1996) conceptual pact model, and Jordans (2000b) intentional influences model, and use these feature sets in a machine learning experiment to automatically learn a model of content selection for object descriptions. Since Dale and Reiters model requires a representation of discourse structure, the corpus annotations are used to derive a representation based on Grosz and Sidners (1986) theory of the intentional structure of discourse, as well as two very simple representations of discourse structure based purel...

  12. On the description of subsystems in relativistic hypersurface Bohmian mechanics.

    Science.gov (United States)

    Dürr, Detlef; Lienert, Matthias

    2014-09-08

    A candidate for a realistic relativistic quantum theory is the hypersurface Bohm-Dirac model. Its formulation uses a foliation of space-time into space-like hypersurfaces. In order to apply the theory and to make contact with the usual quantum formalism, one needs a framework for the description of subsystems. The presence of spin together with the foliation renders the subsystem description more complicated than in the non-relativistic case with spin. In this paper, we provide such a framework in terms of an appropriate conditional density matrix and an effective wave function as well as clarify their relation, thereby generalizing previous subsystem descriptions in the non-relativistic case.

  13. Descriptive psychopathology, phenomenology, and the legacy of Karl Jaspers.

    Science.gov (United States)

    Häfner, Heinz

    2015-03-01

    With his early publications (1910-1913), Karl Jaspers created a comprehensive methodological arsenal for psychiatry, thus laying the foundation for descriptive psychopathology. Following Edmund Husserl, the founder of philosophical phenomenology, Jaspers introduced phenomenology into psychopathology as "static understanding," ie, the unprejudiced intuitive reproduction (Vergegenwärtigung) and description of conscious phenomena. In a longitudinal perspective, "genetic understanding" based on empathy reveals how mental phenomena arise from mental phenomena. Severance in understanding of, or alienation from, meaningful connections is seen as indicating illness or transition of a natural development into a somatic process. Jaspers opted for philosophy early. After three terms of law, he switched to studying medicine, came to psychopathology after very little training in psychiatry; to psychology without ever studying psychology; and to a chair in philosophy without ever studying philosophy. In the fourth and subsequent editions of his General Psychopathology, imbued by his existential philosophy, Jaspers partly abandoned the descriptive method.

  14. Simulation framework and XML detector description for the CMS experiment

    CERN Document Server

    Arce, P; Boccali, T; Case, M; de Roeck, A; Lara, V; Liendl, M; Nikitenko, A N; Schröder, M; Strässner, A; Wellisch, H P; Wenzel, H

    2003-01-01

    Currently CMS event simulation is based on GEANT3 while the detector description is built from different sources for simulation and reconstruction. A new simulation framework based on GEANT4 is under development. A full description of the detector is available, and the tuning of the GEANT4 performance and the checking of the ability of the physics processes to describe the detector response is ongoing. Its integration on the CMS mass production system and GRID is also currently under development. The Detector Description Database project aims at providing a common source of information for Simulation, Reconstruction, Analysis, and Visualisation, while allowing for different representations as well as specific information for each application. A functional prototype, based on XML, is already released. Also examples of the integration of DDD in the GEANT4 simulation and in the reconstruction applications are provided.

  15. Primary Numbers Database for ATLAS Detector Description Parameters

    CERN Document Server

    Vaniachine, A; Malon, D; Nevski, P; Wenaus, T

    2003-01-01

    We present the design and the status of the database for detector description parameters in ATLAS experiment. The ATLAS Primary Numbers are the parameters defining the detector geometry and digitization in simulations, as well as certain reconstruction parameters. Since the detailed ATLAS detector description needs more than 10,000 such parameters, a preferred solution is to have a single verified source for all these data. The database stores the data dictionary for each parameter collection object, providing schema evolution support for object-based retrieval of parameters. The same Primary Numbers are served to many different clients accessing the database: the ATLAS software framework Athena, the Geant3 heritage framework Atlsim, the Geant4 developers framework FADS/Goofy, the generator of XML output for detector description, and several end-user clients for interactive data navigation, including web-based browsers and ROOT. The choice of the MySQL database product for the implementation provides addition...

  16. Gauge-invariant description of Higgs phenomenon and quark confinement

    Science.gov (United States)

    Kondo, Kei-Ichi

    2016-11-01

    We propose a novel description for the Higgs mechanism by which a gauge boson acquires the mass. We do not assume spontaneous breakdown of gauge symmetry signaled by a non-vanishing vacuum expectation value of the scalar field. In fact, we give a manifestly gauge-invariant description of the Higgs mechanism in the operator level, which does not rely on spontaneous symmetry breaking. This enables us to discuss the confinement-Higgs complementarity from a new perspective. The "Abelian" dominance in quark confinement of the Yang-Mills theory is understood as a consequence of the gauge-invariant Higgs phenomenon for the relevant Yang-Mills-Higgs model.

  17. The entire regularization path for the support vector domain description

    DEFF Research Database (Denmark)

    Sjöstrand, Karl; Larsen, Rasmus

    2006-01-01

    -class support vector machine classifier. Recently, it was shown that the regularization path of the support vector machine is piecewise linear, and that the entire path can be computed efficiently. This pa- per shows that this property carries over to the support vector domain description. Using our results......The support vector domain description is a one-class classi- fication method that estimates the shape and extent of the distribution of a data set. This separates the data into outliers, outside the decision boundary, and inliers on the inside. The method bears close resemblance to the two...

  18. F-Theory Description of 3-String Junction

    Institute of Scientific and Technical Information of China (English)

    YANGFu-Zhong

    2003-01-01

    The geometrical description of BPS 3-string junction in the F-theory background is given by lifting a string junction in lib into F-theory and constructing a holomorphic curve in K3 with respect to a special complex structure of K3. The holomorphic curve is fibration of 1-cycles of the elliptic fiber over the geodesic string junction. The F-theory picture in this paper provides a unifying description of both string and string junction, and is advantageous over their M-theory picture.

  19. F-Theory Description of 3-String Junction

    Institute of Scientific and Technical Information of China (English)

    YANG Fu-Zhong

    2003-01-01

    The geometrical description of BPS 3-string junction in the F-theory background is given by lifting a string junction in IIB into F-theory and constructing a holomorphic curve in K3 with respect to a special complex structure of K3. The holomorphic curve is fibration of 1-cycles of the elliptic fiber over the geodesic string junction. The F-theory picture in this paper provides a unifying description of both string and string junction, and is advantageous over their M-theory picture.

  20. Formalized Description of Distributed Denial of Service Attack

    Institute of Scientific and Technical Information of China (English)

    杜彦辉; 马锐; 刘玉树

    2004-01-01

    The distributed denial of service (DDoS) attack is one of the dangers in intrusion modes. It's difficult to defense and can cause serious damage to the system. Based on a careful study of the attack principles and characteristics, an object-oriented formalized description is presented, which contains a three-level framework and offers full specifications of all kinds of DDoS modes and their features and the relations between one another. Its greatest merit lies in that it contributes to analyzing, checking and judging DDoS. Now this formalized description has been used in a special IDS and it works very effectively.

  1. Granular analyzing of weapon SoS demand description

    Institute of Scientific and Technical Information of China (English)

    Zhao Qingsong; Yang Kewei; Chen Yingwu; Li Mengjun

    2009-01-01

    The systematism of weapon combat is the typical characteristic of a modern battlefield. The process of combat is complex and the demand description of weapon system of systems (SOS) is difficult. Granular analyzing is an important method for solving the complex problem in the world. Granular thinking is introduced into the demand description of weapon SoS. Granular computing and granular combination based on a relation of compatibility is proposed. Based on the level of degree and degree of detail, the granular resolution of weapon SoS is defined and an example is illustrated at the end.

  2. System design description for sampling fuel in K basins

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, G.A., Westinghouse Hanford

    1996-09-17

    This System Design Description provides: (1) statements of the Spent Nuclear Fuel Project`s needs for sampling of fuel in the K East and K West Basins, (2) the sampling equipment functions and requirements, (3) a general work plan and the design logic followed to develop the equipment, and (4) a summary description of the design for the sampling equipment. This report summarizes the integrated application of both the subject equipment and the canister sludge sampling system in the characterization campaigns at K Basins.

  3. Specification of photonic circuits using Quantum Hardware Description Language

    CERN Document Server

    Tezak, Nikolas; Pavlichin, Dmitri S; Sarma, Gopal; Mabuchi, Hideo

    2011-01-01

    Following the simple observation that the interconnection of a set of quantum optical input-output devices can be specified using structural mode VHSIC Hardware Description Language (VHDL), we demonstrate a computer-aided schematic capture workflow for modeling and simulating multi-component photonic circuits. We describe an algorithm for parsing circuit descriptions to derive quantum equations of motion, illustrate our approach using simple examples based on linear and cavity-nonlinear optical components, and demonstrate a computational approach to hierarchical model reduction.

  4. A microscopic description of black hole evaporation via holography

    CERN Document Server

    Berkowitz, Evan; Maltz, Jonathan

    2016-01-01

    We propose a description of how a large, cold black hole (black zero-brane) in type IIA superstring theory evaporates into freely propagating D0-branes, by solving the dual gauge theory quantitatively. The energy spectrum of emitted D0-branes is parametrically close to thermal when the black hole is large. The black hole, while initially cold, gradually becomes an extremely hot and stringy object as it evaporates. As it emits D0-branes, its emission rate speeds up and it evaporates completely without leaving any remnant. Hence this system provides us with a concrete holographic description of black hole evaporation without information loss.

  5. Qualitative Description of Architectural Quality in Inclusive Architecture

    DEFF Research Database (Denmark)

    Ryhl, Camilla; Kajita, Masashi; Sørensen, Rene

    2016-01-01

    as reflects an applied method for producing the qualitative description of selected buildings that embody UD through creative solutions. The qualitative description of collected examples appears to be effective in delineating sensory aspects of spatial experience; however the systematic development...... of spatial implication of UD, this paper aims to contribute for articulating a means to assess the quality of UD in architecture. Drawing upon numerous cases from research conducted at the Danish Building Research Institute, the paper focuses on sensory aspects of spatial quality, and discusses as well...

  6. Description and Analysis Pattern for Theses and Dissertations

    Directory of Open Access Journals (Sweden)

    Sirous Alidousti

    2009-07-01

    Full Text Available Dissertations and theses that are generated in course of research at PhD and Masters levels are considered to be important scientific documents in every country. Data description and analysis of such documents collected together, could automatically - especially when compared with data from other resources - provide new information that is very valuable. Nevertheless, no comprehensive, integrated pattern exists for such description and analysis. The present paper offers the findings of a research conducted for devising an information analysis pattern for dissertations and theses. It also puts forward information categories derived from such documents that could be described and analyzed.

  7. Descriptive Topology in Selected Topics of Functional Analysis

    CERN Document Server

    Kakol, J; Pellicer, Manuel Lopez

    2011-01-01

    "Descriptive Topology in Selected Topics of Functional Analysis" is a collection of recent developments in the field of descriptive topology, specifically focused on the classes of infinite-dimensional topological vector spaces that appear in functional analysis. Such spaces include Frechet spaces, (LF)-spaces and their duals, and the space of continuous real-valued functions C(X) on a completely regular Hausdorff space X, to name a few. These vector spaces appear in functional analysis in distribution theory, differential equations, complex analysis, and various other analytical set

  8. The Description Of Characters In The Novel The Scarlet Letter

    OpenAIRE

    Sirait, Wahyu Alamsyah

    2016-01-01

    Literature is a kind of imaginative writing. It reflects a problem of life done by human being. Novel is one of literary works that has intrinsic elements. Studying intrinsic elements in a novel, it means to study life experience of group human being through a novel. The writer analyzes the theme in novel The shining by Stephen King 's. therefore, this paper is entitled become : THE DESCRIPTION OF CHARACTERS IN THE NOVEL THE SCARLET LETTER. This writing is a description on the characters used...

  9. The study of prescriptive and descriptive models of decision making

    Directory of Open Access Journals (Sweden)

    Ashok A Divekar

    2012-04-01

    Full Text Available The field of decision making can be loosely divided into two parts: the study of prescriptive models and the study of descriptive models. Prescriptive decision scientists are concerned with prescribing methods for making optimal decisions. Descriptive decision researchers are concerned with the bounded way in which the decisions are actually made. The statistics courses treat risk from a prescriptive, by suggesting rational methods. This paper brings out the work done by many researchers by examining the psychological factors that explain how managers deviate from rationality in responding to uncertainty.

  10. Advanced Transport Operating System (ATOPS) control display unit software description

    Science.gov (United States)

    Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

    1992-01-01

    The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

  11. Semantic Based Cluster Content Discovery in Description First Clustering Algorithm

    Directory of Open Access Journals (Sweden)

    MUHAMMAD WASEEM KHAN

    2017-01-01

    Full Text Available In the field of data analytics grouping of like documents in textual data is a serious problem. A lot of work has been done in this field and many algorithms have purposed. One of them is a category of algorithms which firstly group the documents on the basis of similarity and then assign the meaningful labels to those groups. Description first clustering algorithm belong to the category in which the meaningful description is deduced first and then relevant documents are assigned to that description. LINGO (Label Induction Grouping Algorithm is the algorithm of description first clustering category which is used for the automatic grouping of documents obtained from search results. It uses LSI (Latent Semantic Indexing; an IR (Information Retrieval technique for induction of meaningful labels for clusters and VSM (Vector Space Model for cluster content discovery. In this paper we present the LINGO while it is using LSI during cluster label induction and cluster content discovery phase. Finally, we compare results obtained from the said algorithm while it uses VSM and Latent semantic analysis during cluster content discovery phase.

  12. Technological Specialisation Courses in Portugal: Description and Suggested Improvements

    Science.gov (United States)

    da Costa, Nilza Maria Vilhena Nunes; Simoes, Ana Raquel; Pereira, Giselia Antunes; Pombo, Lucia

    2009-01-01

    This study is a part of the "Post-secondary Vocational Training in Portugal Project: from a description through to suggestions to improve training quality", which ran from 2003 to 2006. This article, which makes use of data obtained from interviews with Directors of Schools which offer technological specialisation courses (CETs) and from…

  13. Stereo Orthogonal Axonometric Perspective for the Teaching of Descriptive Geometry

    Science.gov (United States)

    Méxas, José Geraldo Franco; Guedes, Karla Bastos; Tavares, Ronaldo da Silva

    2015-01-01

    Purpose: The purpose of this paper is to present the development of a software for stereo visualization of geometric solids, applied to the teaching/learning of Descriptive Geometry. Design/methodology/approach: The paper presents the traditional method commonly used in computer graphic stereoscopic vision (implemented in C language) and the…

  14. Dictator Game Giving: The Importance of Descriptive versus Injunctive Norms.

    Science.gov (United States)

    Raihani, Nichola J; McAuliffe, Katherine

    2014-01-01

    Human behaviour is influenced by social norms but norms can entail two types of information. Descriptive norms refer to what others do in this context, while injunctive norms refer to what ought to be done to ensure social approval. In many real-world situations these norms are often presented concurrently meaning that their independent effects on behaviour are difficult to establish. Here we used an online Dictator Game to test how descriptive and injunctive norms would influence dictator donations when presented independently of one another. In addition, we varied the cost of complying with the norm: By stating that $0.20 or $0.50 cent donations from a $1 stake were normal or suggested, respectively. Specifying a higher target amount was associated with increased mean donation size. In contrast to previous studies, descriptive norms did not seem to influence giving behaviour in this context, whereas injunctive norms were associated with increased likelihood to give at least the target amount to the partner. This raises the question of whether injunctive norms might be more effective than descriptive norms at promoting prosocial behaviour in other settings.

  15. General Description of Ideal Tokamak MHD Instability Ⅱ

    Institute of Scientific and Technical Information of China (English)

    石秉仁

    2002-01-01

    In this subsequent study on general description of ideal tokamak MHD instability,the part Ⅱ, by using a coordinate with rectified magnetic field lines, the eigenmode equationsdescribing the low-mode-number toroidal Alfven modes (TAE and EAE) are derived through afurther expansion of the shear Alfven equation of motion.

  16. Multipath Routing of Multiple Description Coded Images in Wireless Networks

    Institute of Scientific and Technical Information of China (English)

    徐缓缓; 朱策; 虞露

    2014-01-01

    Multiple description coding (MDC) generates multiple decodable bitstreams for a source to combat informa-tion loss. In this paper, multipath routing problem for two-description coded images is investigated for traditional and coded wireless networks without and with coding capability at intermediate nodes, respectively. Firstly, we formulate an interference-aware MDC multipath routing for traditional networks by employing a time-division link scheduling method to eliminate wireless interference, and ultimately obtain an optimal path selection corresponding to the minimum achievable distortion. Secondly, for coded networks, we evaluate practical wireless network coding (NC) in delivering descriptions of multiple unicast sessions. While NC increases maximum supporting flow rate of MDC descriptions in wireless networks, possible undecodability of NC mixed information is alleviated by MDC. To minimize achievable distortion, a proposed interference-and-coding-aware MDC multipath routing strikes a good balance between minimizing side effect of wireless interference avoidance and maximizing NC opportunity. Simulation results validate the effectiveness of the two proposed schemes.

  17. Extradyadic sex : The role of descriptive and injunctive norms

    NARCIS (Netherlands)

    Buunk, BP; Bakker, AB

    1995-01-01

    The willingness to engage in extradyadic sexual behavior was examined in relation to attitudes, descriptive norms (what others do or are willing to do), and injunctive norms (what others think one should do). Although in research on attitude-behavior relationships injunctive norms are usually assess

  18. Qualitative description - the poor cousin of health research?

    DEFF Research Database (Denmark)

    Neergaard, Mette Asbjørn; Olesen, Frede; Andersen, Rikke Sand

    2009-01-01

    of use. DISCUSSION: Qualitative description is a useful qualitative method in much medical research if you keep the limitations of the approach in mind. It is especially relevant in mixed method research, in questionnaire development and in research projects aiming to gain firsthand knowledge of patients...

  19. 40 CFR 161.162 - Description of production process.

    Science.gov (United States)

    2010-07-01

    ... recover or recycle starting materials, intermediates or the substance produced). (8) A description of the... continuous (a single reaction process from starting materials to active ingredient), but is accomplished in...) The identity of the materials used to produce the product, their relative amounts, and the order...

  20. Family Snapshots: A Descriptive Classroom Exercise in Memory and Insight

    Science.gov (United States)

    Gladding, Samuel T.; Cox, Elizabeth

    2008-01-01

    "Family Snapshots" are 100-words-or-less descriptive memories of times in the lives of families that highlight poignant moments. They complement other exercises within a family counseling course, including the use of genograms. Modeled after the "Washington Post Magazine"'s series "Life Is Short: Autobiography as Haiku," these snapshots give…

  1. Descriptive Feedback; Increasing Teacher Awareness, Adapting Research Techniques.

    Science.gov (United States)

    Kepler, Karen B.

    This study investigated the ability of middle school teachers to use descriptive feedback from their students in changing their teaching behavior. One homeroom group of twenty-five students was observed in interaction with nine teachers of math, English, social studies, and science over a one-year period to elicit both quantifiable and qualitative…

  2. A climatological description of the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, C.H.

    1990-05-22

    This report provides a general climatological description of the Savannah River Site. The description provides both regional and local scale climatology. The regional climatology includes a general regional climatic description and presents information on occurrence frequencies of the severe meteorological phenomena that are important considerations in the design and siting of a facility. These phenomena include tornadoes, thunderstorms, hurricanes, and ice/snow storms. Occurrence probabilities given for extreme tornado and non-tornado winds are based on previous site specific studies. Local climatological conditions that are significant with respect to the impact of facility operations on the environment are described using on-site or near-site meteorological data. Summaries of wind speed, wind direction, and atmospheric stability are primarily based on the most recently generated five-year set of data collected from the onsite meteorological tower network (1982--86). Temperature, humidity, and precipitation summaries include data from SRL's standard meteorological instrument shelter and the Augusta National Weather Service office at Bush Field through 1986. A brief description of the onsite meteorological monitoring program is also provided. 24 refs., 15 figs., 22 tabs.

  3. A coherent description of the process of design

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    1992-01-01

    A description of the creative design process is given based on Empiricism and using the theory of sets on conceptual and subconscious representations of the human mind. Definitions that are more precise are given of a number of common concepts such as association, synthesis, culture, creation, art...

  4. Towards a Bernsteinian Language of Description for Mathematics Classroom Discourse

    Science.gov (United States)

    Straehler-Pohl, Hauke; Gellert, Uwe

    2013-01-01

    This article aims at developing an external language of description to investigate the problem of why particular groups of students are systematically not provided access to school mathematical knowledge. Based on Basil Bernstein's conceptualisation of power in classification, we develop a three-dimensional model that operationalises the…

  5. 22 CFR 67.4 - Description of functions and procedures.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Description of functions and procedures. 67.4 Section 67.4 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES ORGANIZATION OF THE... solutions to national problems. (3) Education, culture and communications. NED funds programs that nourish...

  6. Quantity and quality of trait-descriptive type nouns

    NARCIS (Netherlands)

    De Raad, B.; Ostendorf, F

    1996-01-01

    In this paper we refute Henss' (1995) conclusion that the German language does not contain far more personality descriptive adjectives than type nouns. Since Henss' paper touches in passing some of the most sensitive aspects of the psycholexical approach, we address some of the tendencies in his pap

  7. A Unified Description of Structural Levels in Biomolecules.

    Science.gov (United States)

    Macarulla, Alberto; And Others

    1990-01-01

    A single, didactic criterion for the description of all biological macromolecules is proposed. This criterion is applicable to globular, fibrous or mixed proteins, as well as to nucleic acids and lipids or polysaccharides. Specific examples are given for all except lipids and polysaccarides. (KR)

  8. Analog Hardware Description Language and Its Relations to VHDL

    Directory of Open Access Journals (Sweden)

    J. Popelek

    1996-09-01

    Full Text Available Primary motivations for analogue hardware description language (VHDL-A is to support the modelling of physical systems. The VHDL-A must therefore allow to model the physical conservation laws, such as the energy conservation law, which states that energy can neither be created nor destroyed, but it can only change its form.

  9. 15 CFR 16.2 - Description and goal of program.

    Science.gov (United States)

    2010-01-01

    ... consumer purchasing decisions and enhance consumer satisfaction. It also educates consumers, distributors... CONSUMER PRODUCT INFORMATION LABELING PROGRAM § 16.2 Description and goal of program. (a) The Department's Voluntary Consumer Product Information Labeling Program makes available to consumers, at the point of...

  10. The description of Ilokano in the 17th century

    NARCIS (Netherlands)

    R. Fernández Rodriguez

    2014-01-01

    The grammar Arte de la lengua ilocana (1627) was written by the Augustinian Francisco López (?-1627) in order to learn the language and to be able to spread the Christian doctrine in the Philippines. It is the first description of this Austronesian language. It is written in Spanish and based on dat

  11. Handbook of Forecasting Techniques. Part 2. Description of 31 Techniques

    Science.gov (United States)

    1977-08-01

    roles (homemaker, young executive, etc.), and approaches combining per- sonality traits with demographics to define a life style (" swinger ," "contented...requires characterization of groups of people in terms of dominant value sets. Characterization can be descriptive (" swingers "), focussed on a dominant

  12. A Petri Net Definition of a System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten; Madsen, Ole Lehrmann

    1979-01-01

    This paper introduces a language for the description of systems with concurrency, and presents a formal definition of its semantics. The language is based on Delta and the semantic model is an extension of Petri nets with a data part and with expressions attached to transitions and to places....

  13. Using the Network Description Language in Optical Networks

    NARCIS (Netherlands)

    Ham, J.J. van der; Grosso, P.; Pol, R. van der; Toonk, A.; Laat, C. de

    2007-01-01

    Current research networks allow end users to build their own application-specific connections (lightpaths) and Optical Private Networks (OPNs). This requires a clear communication between the requesting application and the network. The Network Description Language (NDL) is a vocabulary designed to d

  14. Description-based and experience-based decisions: individual analysis

    Directory of Open Access Journals (Sweden)

    Andrey Kudryavtsev

    2012-05-01

    Full Text Available We analyze behavior in two basic classes of decision tasks: description-based and experience-based. In particular, we compare the prediction power of a number of decision learning models in both kinds of tasks. Unlike most previous studies, we focus on individual, rather than aggregate, behavioral characteristics. We carry out an experiment involving a battery of both description- and experience-based choices between two mixed binary prospects made by each of the participants, and employ a number of formal models for explaining and predicting participants' choices: Prospect theory (PT (Kahneman and Tversky, 1979; Expectancy-Valence model (EVL (Busemeyer and Stout, 2002; and three combinations of these well-established models. We document that the PT and the EVL models are best for predicting people's decisions in description- and experience-based tasks, respectively, which is not surprising as these two models are designed specially for these kinds of tasks. Furthermore, we find that models involving linear weighting of gains and losses perform better in both kinds of tasks, from the point of view of generalizability and individual parameter consistency. We therefore, conclude that, overall, when both prospects are mixed, the assumption of diminishing sensitivity does not improve models' prediction power for individual decision-makers. Finally, for some of the models' parameters, we document consistency at the individual level between description- and experience-based tasks.

  15. Relative Contributions of Three Descriptive Methods: Implications for Behavioral Assessment

    Science.gov (United States)

    Pence, Sacha T.; Roscoe, Eileen M.; Bourret, Jason C.; Ahearn, William H.

    2009-01-01

    This study compared the outcomes of three descriptive analysis methods--the ABC method, the conditional probability method, and the conditional and background probability method--to each other and to the results obtained from functional analyses. Six individuals who had been diagnosed with developmental delays and exhibited problem behavior…

  16. Logical Characterisation of Ontology Construction using Fuzzy Description Logics

    DEFF Research Database (Denmark)

    Badie, Farshad; Götzsche, Hans

    Ontologies based on Description Logics (DLs) have proved to be effective in formally sharing knowledge across semantic technologies, e.g. Semantic Web, Natural Language Processing, Text Analytics, Business intelligence. Our main goal is analysing ontology construction considering vagueness. We have...

  17. 13 CFR 107.1500 - General description of Participating Securities.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false General description of Participating Securities. 107.1500 Section 107.1500 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES SBA Financial Assistance for Licensees (Leverage)...

  18. A New Algorithm for Secne Description without a priori Knowledge

    Institute of Scientific and Technical Information of China (English)

    DONGYuning

    2003-01-01

    Scene description plays a major role in the interpretation of images.In this paper a novel data-and rule-driven system for three dimensional(3D)segmentation and scene description in an unknown environment is presented.This system generates hierarchies of features that correspond to structural elements such as boundaries and shape classes of individual object as well as relationships between objects.It is implemented as an added highlevel component to an existing low-level binocular vision system(described in a separate paper).Based on a pair of matched stereo images produced by that system,3D segmentation is first performed to group object bundary data into several edge-sets each of which is believed belonging to one particular object.Then gross features of each object is extracted and stored in an object record.The final structural description of the scene is accomplished with the information of object record,a set of rules and a rule implementer.The system is designed to handle partially occluded objects of different shape and size on the 2D images.Experimental results have shown its success in computing boty object and structural level descriptions of common man-made objects.

  19. Creating Body Shapes From Verbal Descriptions by Linking Similarity Spaces.

    Science.gov (United States)

    Hill, Matthew Q; Streuber, Stephan; Hahn, Carina A; Black, Michael J; O'Toole, Alice J

    2016-11-01

    Brief verbal descriptions of people's bodies (e.g., "curvy," "long-legged") can elicit vivid mental images. The ease with which these mental images are created belies the complexity of three-dimensional body shapes. We explored the relationship between body shapes and body descriptions and showed that a small number of words can be used to generate categorically accurate representations of three-dimensional bodies. The dimensions of body-shape variation that emerged in a language-based similarity space were related to major dimensions of variation computed directly from three-dimensional laser scans of 2,094 bodies. This relationship allowed us to generate three-dimensional models of people in the shape space using only their coordinates on analogous dimensions in the language-based description space. Human descriptions of photographed bodies and their corresponding models matched closely. The natural mapping between the spaces illustrates the role of language as a concise code for body shape that captures perceptually salient global and local body features.

  20. VAMP: semantic validation for MPEG-7 profile descriptions

    NARCIS (Netherlands)

    Troncy, R.; Bailer, W.; Hausenblas, M.; Höffernig, M.

    2007-01-01

    MPEG-7 can be used to create complex and comprehensive metadata descriptions of multimedia content. Since MPEG-7 is defined in terms of an XML schema, the semantics of its elements has no formal grounding. In addition, certain features can be described in multiple ways. MPEG-7 profiles are subsets o

  1. Using query logs and click data to create improved descriptions

    NARCIS (Netherlands)

    Heijden, M.V.D.; Hinne, M.; Kraaij, W.; Verberney, S.; Weide, T.V.D.

    2009-01-01

    Logfles of search engines are a promising resource for data mining, since they provide raw data associated to users and web documents. In this paper we focus on the latter as- pect and explore how the information in logfles could be used to improve document descriptions. A pilot experiment demonstra

  2. Prolog as description and implementation language in computer science teaching

    DEFF Research Database (Denmark)

    Christiansen, Henning

    Prolog is a powerful pedagogical instrument for theoretical elements of computer science when used as combined description language and experimentation tool. A teaching methodology based on this principle has been developed and successfully applied in a context with a heterogeneous student...

  3. 2010 National Beneficiary Survey: Methodology and Descriptive Statistics.

    OpenAIRE

    Debra Wright; Gina Livermore; Denise Hoffman; Eric Grau; Maura Bardos

    2012-01-01

    This report presents the sampling design and data collection activities for round 4 (2010) of the Social Security Administration’s National Beneficiary Survey (NBS). It also provides descriptive statistics on working-age individuals receiving Supplemental Security Income and Social Security Disability Insurance benefits, based on the nationally representative sample from the 2010 NBS.

  4. Strategy optimization for controlled Markov process with descriptive complexity constraint

    Institute of Scientific and Technical Information of China (English)

    JIA QingShan; ZHAO QianChuan

    2009-01-01

    Due to various advantages in storage and Implementation,simple strategies are usually preferred than complex strategies when the performances are close.Strategy optimization for controlled Markov process with descriptive complexity constraint provides a general framework for many such problems.In this paper,we first show by examples that the descriptive complexity and the performance of a strategy could be Independent,and use the F-matrix in the No-Free-Lunch Theorem to show the risk that approximating complex strategies may lead to simple strategies that are unboundedly worse in cardinal performance than the original complex strategies.We then develop a method that handles the descriptive complexity constraint directly,which describes simple strategies exactly and only approximates complex strategies during the optimization.The ordinal performance difference between the resulting strategies of this selective approximation method and the global optimum is quantified.Numerical examples on an engine maintenance problem show how this method Improves the solution quality.We hope this work sheds some insights to solving general strategy optimization for controlled Markov procase with descriptive complexity constraint.

  5. Quantum description of classical apparatus; Zeno effect and decoherence

    CERN Document Server

    Gurvitz, S A

    2003-01-01

    We study the measurement process by treating classical detectors entirely quantum mechanically. Transition to the classical description and the mechanism of decoherence is investigated. We concentrate on influence of continuous measurement on decay of unstable systems (quantum Zeno effect). We discuss the experimental consequences of our results and a role of the projection postulate in a measurement process.

  6. Completely reproducible description of digital sound data with cellular automata

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Masato; Kuroiwa, Jousuke; Nara, Shigetoshi

    2002-12-30

    A novel method of compressive and completely reproducible description of digital sound data by means of rule dynamics of CA (cellular automata) is proposed. The digital data of spoken words and music recorded with the standard format of a compact disk are reproduced completely by this method with use of only two rules in a one-dimensional CA without loss of information.

  7. Ischemic Segment Detection using the Support Vector Domain Description

    DEFF Research Database (Denmark)

    Hansen, Michael Sass; Ólafsdóttir, Hildur; Sjöstrand, Karl

    2007-01-01

    and registration of the myocardium provided pixel-wise signal intensity curves that were analyzed using the Support Vector Domain Description (SVDD). In contrast to normal SVDD, the entire regularization path was calculated and used to calculate a generalized distance. The results corresponded well to the ischemic...

  8. Are Weapons Searches in the Job Descriptions of Instructional Leaders?

    Science.gov (United States)

    Zimmerman, Judith A.

    2005-01-01

    In this article, the author poses the question "Are weapons searches in the job descriptions of instructional leaders?" which brings to attention changing duties of school principals that were not faced by previous generations. The article reports observations made during time spent with a current high school principal.

  9. Qualitative Description of Obscuration Factors in Central Europe

    Science.gov (United States)

    1980-09-01

    enviroments , In late 1977 the Army Vice Chief of Staff expressed concern about the use of realistic battlefield enviromental conditions throughout the Army...are discussed in the chapter on natural obscurants. Battlefield ohscurants are dust, smoke , and fire resulting from battle and intentional smoke . The...APPENDIX B. QUALITATIVE DESCRIPTIONS OF SMOKE ......... 102 1. GENERAL CHARACTERISTICS....... . ........ 102 2. DISSEMINATION AO,.4.........,.,.,. , 103

  10. Probabilistic Description of a Clay Site using CPTU tests

    DEFF Research Database (Denmark)

    Andersen, Sarah; Lauridsen, Kristoffer; Nielsen, Benjaminn Nordahl

    2012-01-01

    meter in thickness. For each slice, a map of the variation of the undrained shear strength is created through Kriging and the probability of finding weak zones in the deposit is calculated. This results in a description of the spatial variation of the undrained shear strength at the site. Making...

  11. 31 CFR 309.2 - Description of Treasury bills (General).

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Description of Treasury bills (General). 309.2 Section 309.2 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT ISSUE AND SALE OF...

  12. Through the Looking Glass: Towards Thicker Description of Teaching.

    Science.gov (United States)

    Olson, John K.

    A "thick" description of teaching is referred to as the uncovering of the meaning of what is being said or done by knowing the structure in which it is said or done. In this ethnographic study of teachers' experiences with microcomputers in their classrooms, George Kelly's (1955) personal construct theory was used to develop a clinical interview…

  13. 42 CFR 456.141 - Purpose and general description.

    Science.gov (United States)

    2010-10-01

    ...: Medical Care Evaluation Studies § 456.141 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available health facilities and... care evaluation studies— (1) Emphasize identification and analysis of patterns of patient care; and...

  14. 42 CFR 456.241 - Purpose and general description.

    Science.gov (United States)

    2010-10-01

    ... Ur Plan: Medical Care Evaluation Studies § 456.241 Purpose and general description. (a) The purpose of medical care evaluation studies is to promote the most effective and efficient use of available... health care. (b) Medical care evaluation studies— (1) Emphasize identification and analysis of...

  15. NOTES ON TRICHOFERUS ARENBERGERI WITH DESCRIPTION OF MALE (COLEOPTERA, CERAMBYCIDAE

    Directory of Open Access Journals (Sweden)

    Alessandro B. Biscaccianti

    2008-04-01

    Full Text Available Trichoferus arenbergeri is a poorly known endemic species of Sardinia, described upon three females. Description of the male and the species’ biology is given in this paper, together with short notes on its habitat. The relationships between this species, T. fasciculatus and T. spartii are also briefly discussed.

  16. Description of the DLL regulation interface in HAWC

    DEFF Research Database (Denmark)

    Larsen, Torben J.

    2001-01-01

    This report contains a description of the external regulation interface between the aeroelastic code HAWC and a separate regulation unit programmed as a DLL (Dynamic Link Library). Specific HAWC commands used with the regulation as well as simple DLLexamples written in Delphi, Fortran and C...

  17. THEORETICAL DESCRIPTION OF NEAR EDGE EELS AND XAS SPECTRA

    NARCIS (Netherlands)

    SAWATZKY, GA

    1991-01-01

    In this communication I want to briefly describe the contents of the talk I presented at the lake Tahoe EELS conference. Since most of what I talked about has or will appear in print in another form, I will restrict myself to very brief descriptions of in my view relevant basic ideas and supply a li

  18. 31 CFR 316.2 - Description of bonds.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Description of bonds. 316.2 Section 316.2 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE, DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT OFFERING OF UNITED STATES SAVINGS BONDS, SERIES E §...

  19. Reading Alien Landscapes: Thick versus Thin Descriptions in Archaeoastronomy

    Science.gov (United States)

    Malville, J. McKim

    2015-05-01

    This paper reviews the nature of "thick descriptions" promoted by Clifford Geertz and explores the application of this methodology to archaeoastronomy. The approach aims to describe and explain human behavior in the realms of the sacred and secular. Thick description emphasizes the emic signification of social action; an etic analysis would be viewed as thin. A useful application of this methodology is to consider astronomical events contained in the archaeological record as signifiers of deeper meaning and purpose within the culture. By following the string of signification one can delve deeply into the culture and attempt to explain behavior associated with ancient astronomy. Another element of thick descriptions is the use of redundancy as a test for thoroughness. An archaeoastronomical phenomenon that appears to be unique and idiosyncratic may mean that the investigator has not searched the archaeological record sufficiently thoroughly or needs to alter the basic interpretation. Examples from India and Peru are discussed in which the interpretation of astronomical phenomena could lead to misrepresentations of meaning and function if only a thin description is attempted.

  20. English Grammar Comparison:Descriptive Grammar vs. Prescriptive Grammar

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-wen; LI Yi-an

    2015-01-01

    English grammar is thought as one of the most important parts in both language learning and teaching. While few peo⁃ple know there is more than one kind of English grammar. This essay provides the features and comparison between two com⁃monly used English grammar, namely descriptive grammar and prescriptive grammar, and assist English teachers to explore further in grammar teaching.

  1. Route Description in Iwaidja: Grammar and Conceptualisation of Motion

    Science.gov (United States)

    Edmonds-Wathen, Cris

    2016-01-01

    This study focussed on the effect of grammar of Iwaidja, an indigenous Australian language, on mathematical conceptualisation. It investigated route description in Iwaidja. Spatial concepts such as direction, height and movement in relation to another object are briefly described using examples. Differences between English and Iwaidja are used to…

  2. Powerful Writing: Description in Creating Monster Trading Cards.

    Science.gov (United States)

    Kimbro, Michelle

    Description can make a piece of writing come alive. This lesson plan combines art and word play, emphasizing writing for an audience while drawing on multiple intelligences. Peer review and feedback reinforces the revision process as students create trading cards by drawing pictures of monsters and describing and categorizing them in detail.…

  3. Water Resources Research Grant Program project descriptions, fiscal year 1985

    Science.gov (United States)

    ,

    1985-01-01

    Information on each of the 24 projects funded by the U.S. Geological Survey in FY 1985 under section 105 of Public Law 93-242 (the Water Resources Research Act of 1984) is presented, including the grant number, organization, the period of performance, and a brief description of the work to be carried out. (Lantz-PTT)

  4. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina (ed.)

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  5. Inadequate description of educational interventions in ongoing randomized controlled trials

    Directory of Open Access Journals (Sweden)

    Pino Cécile

    2012-05-01

    Full Text Available Abstract Background The registration of clinical trials has been promoted to prevent publication bias and increase research transparency. Despite general agreement about the minimum amount of information needed for trial registration, we lack clear guidance on descriptions of non-pharmacologic interventions in trial registries. We aimed to evaluate the quality of registry descriptions of non-pharmacologic interventions assessed in ongoing randomized controlled trials (RCTs of patient education. Methods On 6 May 2009, we searched for all ongoing RCTs registered in the 10 trial registries accessible through the World Health Organization International Clinical Trials Registry Platform. We included trials evaluating an educational intervention (that is, designed to teach or train patients about their own health and dedicated to participants, their family members or home caregivers. We used a standardized data extraction form to collect data related to the description of the experimental intervention, the centers, and the caregivers. Results We selected 268 of 642 potentially eligible studies and appraised a random sample of 150 records. All selected trials were registered in 4 registers, mainly ClinicalTrials.gov (61%. The median [interquartile range] target sample size was 205 [100 to 400] patients. The comparator was mainly usual care (47% or active treatment (47%. A minority of records (17%, 95% CI 11 to 23% reported an overall adequate description of the intervention (that is, description that reported the content, mode of delivery, number, frequency, duration of sessions and overall duration of the intervention. Further, for most reports (59%, important information about the content of the intervention was missing. The description of the mode of delivery of the intervention was reported for 52% of studies, the number of sessions for 74%, the frequency of sessions for 58%, the duration of each session for 45% and the overall duration for 63

  6. Description of recommended non-thermal mixed waste treatment technologies: Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document contains description of the technologies selected for inclusions in the Integrated Nonthermal Treatment Systems (INTS) Study. The purpose of these descriptions is to provide a more complete description of the INTS technologies. It supplements the summary descriptions of candidate nonthermal technologies that were considered for the INTS.

  7. Spacetime quantum probabilities II: Relativized descriptions and Popperian propensities

    Science.gov (United States)

    Mugur-Schächter, M.

    1992-02-01

    In the first part of this work(1) we have explicated the spacetime structure of the probabilistic organization of quantum mechanics. We have shown that each quantum mechanical state, in consequence of the spacetime characteristics of the epistemic operations by which the observer produces the state to be studied and the processes of qualification of these, brings in a tree-like spacetime structure, a “quantum mechanical probability tree,” that transgresses the theory of probabilities as it now stands. In this second part we develop the general implications of these results. Starting from the lowest level of cognitive action and creating an appropriate symbolism, we construct a “relativizing epistemic syntax,” a “general method of relativized conceptualization” where—systematically—each description is explicitly referred to the epistemic operations by which the observer produces the entity to be described and obtains qualifications of it. The method generates a typology of increasingly complex relativized descriptions where the question of realism admits of a particularly clear pronouncement. Inside this typology the epistemic processes that lie—UNIVERSALLY—at the basis of any conceptualization, reveal a tree-like spacetime structure. It appears in particular that the spacetime structure of the relativized representation of a probabilistic description, which transgresses the nowadays theory of probabilities, is the general mould of which the quantum mechanical probability trees are only particular realizations. This entails a clear definition of the descriptional status of quantum mechanics. While the recognition of the universal cognitive content of the quantum mechanical formalism opens up vistas toward mathematical developments of the relativizing epistemic syntax. The relativized representation of a probabilistic description leads with inner necessity to a “morphic” interpretation of probabilities that can be regarded as a formalized and

  8. Ontology-supported and XML-based knowledge description language

    Institute of Scientific and Technical Information of China (English)

    王向华; 覃征; 何坚; 王志敏

    2004-01-01

    Differences in the structure and semantics of knowledge that is created and maintained by the various actors on the World Wide Web make its exchange and utilization a problematic task. This is an important issue facing organizations undertaking knowledge management initiatives. An XML-based and ontology-supported knowledge description language (KDL) is presented, which has three-tier structure (core KDL, extended KDL and complex KDL), and takes advantages of strong point of ontology, XML, description logics, frame-based systems. And then, the framework and XMLbased syntax of KDL are introduced, and the methods of translating KDL into first order logic (FOL) are presented. At last, the implementation of KDL on the Web is described, and the reasoning ability of KDL proved by experiment is illustrated in detail.

  9. Statistical mechanics and the description of the early universe I

    DEFF Research Database (Denmark)

    Pessah, Martin Elias; F. Torres, Diego; Vucetich, H.

    2001-01-01

    We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related with the ......We analyze how the thermal history of the universe is influenced by the statistical description, assuming a deviation from the usual Bose-Einstein, Fermi-Dirac and Boltzmann-Gibbs distribution functions. These deviations represent the possible appearance of non-extensive effects related...... law, and provide an estimate on how known cosmological bounds on the masses of neutrinos are modified by a change in the statistics. We particularly analyze here the recombination epoch, making explicit use of the chemical potentials involved in order to attain the necessary corrections. All...

  10. Proposed Representation Approach Based on Description Logics Formalism

    Directory of Open Access Journals (Sweden)

    Yasser Yahiaoui

    2016-05-01

    Full Text Available The most familiar concept in Artificial intelligence is the knowledges representation. It aims to find explicit symbolization covering all semantic aspects of knowledge, and to make possible the use of this representation to produce an intelligent behavior like reasoning. The most important constraint is the usability of the representation; it’s why the structures used must be well defined to facilitate manipulation for reasoning algorithms which leads to facilitate their implementation. In this paper we propose a new approach based on the description logics formalism for the goal of simplification of description logics system implementation. This approach can reduce the complexity of reasoning Algorithm by the vectorisation of concept definition based on the subsumption hierarchy.

  11. Recent advances in description of few two-component fermions

    CERN Document Server

    Kartavtsev, O I

    2012-01-01

    Overview of the recent advances in description of the few two-component fermions is presented. The zero-range interaction limit is generally considered to discuss the principal aspects of the few-body dynamics. Significant attention is paid to detailed description of two identical fermions of mass $m$ and a distinct particle of mass $m_1$; two universal $L^P = 1^-$ bound states arise for mass ratio $m/m_1$ increasing up to the critical value $\\mu_c \\approx 13.607$, beyond which the Efimov effect takes place. The topics considered include rigorous treatment of the few-fermion problem in the zero-range interaction limit, low-dimensional results, the four-body energy spectrum, crossover of the energy spectra for $m/m_1$ near the critical value $\\mu_c $, and properties of potential-dependent states. At last, enlisted are the problems, whose solution is in due course.

  12. ISDTM:An Intrusion Signatures Description Temporal Model

    Institute of Scientific and Technical Information of China (English)

    OuYangMing-guang; ZhouYang-bo

    2003-01-01

    ISDTM, based on an augmented Allen's interval temporal logic (ITL) and first-order predicate calculus, is a formal temporal model for representing intrusion signatures.It is augmented with some real time extensions which enhance the expressivity. Intrusion scenarios usually are the set of events and system states, wherethe temporal sequence is their basic relation. Intrusion signatures description, therefore, is to represent such temporal relations in a sense. While representing these signatures, ISDTM decomposes the intrusion process into the sequence of events according to their relevant intervals, and then specifies network states in these Intervals. The uncertain intrusion signatures as well as basic temporal modes of events, which consist of the parallel mode,the sequential mode and the hybrid mode, can be succinctly and naturally represented in ISDTM. Mode chart is the visualization of intrusion signatures in ISDTM, which makes the formulas more readable. The intrusion signatures descriptions in ISDTM have advantages of compact construct, concise syntax, scalability and easy implementation.

  13. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    on the underlying principles of a production system’s design; and despite the existence of established architecture and platform theories and practices within product design, there is still a need for a better understanding of the architecture phenomenon itself, and certainly how it applies within production system....... The viewpoints provide a set of model kinds to frame select architecture related concerns relating to the production capability and the design of the technical system. With the contribution to architecture description there follows a need to support exchange and processing of architecture information within......The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...

  14. Academic dishonesty among nursing students: a descriptive study.

    Science.gov (United States)

    Keçeci, Ayla; Bulduk, Serap; Oruç, Deniz; Çelik, Serpil

    2011-09-01

    This descriptive and cross-sectional study aims to evaluate academic dishonesty among university nursing students in Turkey. The study's sample included 196 students. Two instruments were used for gathering data. The first instrument, a questionnaire, which included some socio-demographic variables (age, class, gender, education, family structure, parents' attitude and educators' attitude) formed the first part. The second part included the Academic Dishonesty Tendency Scale developed by Eminoğlu and Nartgün. The data were analyzed using descriptive statistics and Kruskall Wallis, One-way Anova, t- test and Mann-Whitney U test. It was found that academic dishonesty was at medium-level (2.60-3.39) in nursing students.

  15. Using Self-Description to Handle Change in Systems

    CERN Document Server

    Estrella, Florida; Le Goff, Jean-Marie; McClatchey, Richard; Murray, Steven

    2002-01-01

    In the web age systems must be flexible, reconfigurable and adaptable in addition to being quick to develop. As a consequence, designing systems to cater for change is becoming not only desirable but required by industry. Allowing systems to be self-describing or description-driven is one way to enable these characteristics. To address the issue of evolvability in designing self-describing systems, this paper proposes a pattern-based, object-oriented, description-driven architecture. The proposed architecture embodies four pillars - first, the adoption of a multi-layered meta-modeling architecture and reflective meta-level architecture, second, the identification of four data modeling relationships that must be made explicit such that they can be examined and modified dynamically, third, the identification of five design patterns which have emerged from practice and have proved essential in providing reusable building blocks for data management, and fourth, the encoding of the structural properties of the fiv...

  16. Three-level description of the domino cellular automaton

    CERN Document Server

    Czechowski, Zbigniew

    2010-01-01

    Inspired by the approach of kinetic theory of gases, a three-level description (microscopic, mesoscopic and macroscopic) of cellular automaton is presented. To provide an analytical treatment a simple domino cellular automaton with avalanches was constructed. Formulas concerning exact relations for density, clusters, avalanches and other parameters in an equilibrium state were derived. It appears that some relations are approximately valid for deviations from the equilibrium, so the adequate Ito equation could be constructed. The equation provides the time evolution description of some variable on the macroscopic level. The results also suggest a motive for applying of the procedure of construction of the Ito equation (from time series data) to natural time series.

  17. Towards a consistent description of in-medium parton branching

    CERN Document Server

    Apolinário, Liliana; Milhano, Guilherme; Salgado, Carlos A

    2015-01-01

    Ultra-relativistic heavy-ion collisions are a window of opportunity to study QCD matter under extreme conditions of temperature and density, such as the quark-gluon plasma. Among the several possibilities, the study of jet quenching - generic name given to in-medium energy loss modifications of the parton branching - is a powerful tool to assess the properties of this new state of matter. The description of the parton shower is very well understood in vacuum (controlled reference) and medium-induced modifications of this process can be experimentally accessed through jet measurements. Current experimental data, however, cannot be entirely described only with energy loss phenomena. Transverse momentum broadening and decoherence effects, both theoretically established by now, and their interplay are essential to build a consistent picture of the medium-modifications of the parton branching and to achieve a correct description of the current experimental data. In this write-up, we will present the latest develop...

  18. Non-Singular Bouncing Cosmology: Consistency of the Effective Description

    CERN Document Server

    Koehn, Michael; Ovrut, Burt

    2015-01-01

    We explicitly confirm that spatially flat non-singular bouncing cosmologies make sense as effective theories. The presence of a non-singular bounce in a spatially flat universe implies a temporary violation of the null energy condition, which can be achieved through a phase of ghost condensation. We calculate the scale of strong coupling and demonstrate that the ghost-condensate bounce remains trustworthy throughout, and that all perturbation modes within the regime of validity of the effective description remain under control. For this purpose we require the perturbed action up to third order in perturbations, which we calculate in both flat and co-moving gauge -- since these two gauges allow us to highlight different physical aspects. Our conclusion is that there exist healthy descriptions of non-singular bouncing cosmologies providing a viable resolution of the big-bang singularities in cosmological models. Our results also suggest a variant of ekpyrotic cosmology, in which entropy perturbations are genera...

  19. Automatic Circuit Extractor for HDL Description Using Program Slicing

    Institute of Scientific and Technical Information of China (English)

    Tun Li; Yang Guo; Si-Kun Li

    2004-01-01

    Design extraction and reduction have been extensively used in modern VLSI design process. The extracted and reduced design can be efficiently processed by various applications, such as formal verification,simulation, automatic test pattern generation (ATPG), etc. This paper presents a new circuit extraction method using program slicing technique, and develops an elegant theoretical basis based on program slicing for circuit extraction from Verilog description. The technique can obtain a chaining slice for given signals of interest. Compared with related researches, the main advantages of the method include that it is fine grain; it has no hardware description language (HDL) coding style limitation; it is precise and is capable of dealing with various Verilog constructions. The technique has been integrated with a commercial simulation environment and incorporated into a design process. The results of practical designs show the significant benefits of the approach.

  20. Gas Dynamics as a Tool for Description of Nondeterministic Particles

    Science.gov (United States)

    Rylov, Yuri A.

    2016-05-01

    Classical gas dynamic equations describe mean motion of stochastic gas molecules. The reason of this stochasticity is in teraction (collisions) between molecules. The wave function is the way to describe the gas dynamic equations Rylov (J. Math. Phys. 40 256-278 1999). If a gas molecules interact via some force field κ l , the gas dynamic equations have the form of the Klein-Gordon equation provided they are written in terms of the wave function. Among two possible approaches: (i) quantum mechanics (QM) as axiomatic conception and (ii) QM as a kind of gas dynamics the second approach is more preferable, because in the first approach the wave function looks as a strange axiomatic object, whereas in the second approach the wave function is a natural way of the gas dynamics description. Besides the second approach admits one to obtain a more complete description of stochastic particles.

  1. Domain-specific Web Service Discovery with Service Class Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Rocco, D; Caverlee, J; Liu, L; Critchlow, T J

    2005-02-14

    This paper presents DynaBot, a domain-specific web service discovery system. The core idea of the DynaBot service discovery system is to use domain-specific service class descriptions powered by an intelligent Deep Web crawler. In contrast to current registry-based service discovery systems--like the several available UDDI registries--DynaBot promotes focused crawling of the Deep Web of services and discovers candidate services that are relevant to the domain of interest. It uses intelligent filtering algorithms to match services found by focused crawling with the domain-specific service class descriptions. We demonstrate the capability of DynaBot through the BLAST service discovery scenario and describe our initial experience with DynaBot.

  2. A quantum bound on the thermodynamic description of gravity

    CERN Document Server

    Hod, Shahar

    2016-01-01

    The seminal works of Bekenstein and Hawking have revealed that black holes have a well-defined thermodynamic description. In particular, it is often stated in the physical literature that black holes, like mundane physical systems, obey the first law of thermodynamics: $\\Delta S=\\Delta E/T_{\\text{BH}}$, where $T_{\\text{BH}}$ is the Bekenstein-Hawking temperature of the black hole. In the present work we test the regime of validity of the thermodynamic description of gravity. In particular, we provide compelling evidence that, due to quantum effects, the first law of thermodynamics breaks down in the low-temperature regime $T_{\\text{BH}}\\times r_{\\text{H}}\\lesssim ({{\\hbar}/{r_{\\text{H}}}})^2$ of near-extremal black holes (here $r_{\\text{H}}$ is the radius of the black-hole horizon).

  3. The Information Flow Framework: A Descriptive Category Metatheory

    CERN Document Server

    Kent, Robert E

    2011-01-01

    The Information Flow Framework (IFF) is a descriptive category metatheory. It is an experiment in foundations, which follows a bottom-up approach to logical description. The IFF forms the structural aspect of the IEEE P1600.1 Standard Upper Ontology (SUO) project. The categorical approach of the IFF provides a principled framework for the modular design of object-level ontologies. The IFF represents meta-logic, and as such operates at the structural level of ontologies. In the IFF, there is a precise boundary between the metalevel and the object level. The modular architecture of the IFF consists of metalevels, namespaces and meta-ontologies. Each metalevel services the levels below by providing a metalanguage used to declare and axiomatize those levels. Corresponding to the metalevels are nested metalanguages, where each metalanguage axiomatization includes specialization of the one immediately above. Within each metalevel, the terminology is partitioned into namespaces, and various namespaces are collected ...

  4. Completion of structured patient descriptions by semantic mining.

    Science.gov (United States)

    Tchraktchiev, Dimitar; Angelova, Galia; Boytcheva, Svetla; Angelov, Zhivko; Zacharieva, Sabina

    2011-01-01

    This paper presents experiments in automatic Information Extraction of medication events, diagnoses, and laboratory tests form hospital patient records, in order to increase the completeness of the description of the episode of care. Each patient record in our hospital information system contains structured data and text descriptions, including full discharge letters. From these letters, we extract automatically information about the medication just before and in the time of hospitalization, especially for the drugs prescribed to the patient, but not delivered by the hospital pharmacy; we also extract values of lab tests not performed and not registered in our laboratory as well as all non-encoded diagnoses described only in the free text of discharge letters. Thus we increase the availability of suitable and accurate information about the hospital stay and the outpatient segment of care before the hospitalization. Information Extraction also helps to understand the clinical and organizational decisions concerning the patient without increasing the complexity of the structured health record.

  5. Unified description of dense matter in neutron stars and magnetars

    CERN Document Server

    Chamel, N; Mihailov, L M; Velchev, Ch J; Stoyanov, Zh K; Mutafchieva, Y D; Ivanovich, M D; Fantina, A F; Pearson, J M; Goriely, S

    2013-01-01

    We have recently developed a set of equations of state based on the nuclear energy density functional theory providing a unified description of the different regions constituting the interior of neutron stars and magnetars. The nuclear functionals, which were constructed from generalized Skyrme effective nucleon-nucleon interactions, yield not only an excellent fit to essentially all experimental atomic mass data but were also constrained to reproduce the neutron-matter equation of state as obtained from realistic many-body calculations.

  6. Bare and effective fluid description in brane world cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Norman [Universidad de Santiago, Departamento de Fisica, Facultad de Ciencia, Casilla 307, Santiago (Chile); Lepe, Samuel; Saavedra, Joel [Pontificia Universidad Catolica de Valparaiso, Instituto de Fisica, Casilla 4950, Valparaiso (Chile); Pena, Francisco [Universidad de La Frontera, Departamento de Ciencias Fisicas, Facultad de Ingenieria, Ciencias y Administracion, Avda. Francisco Salazar 01145, Casilla 54-D, Temuco (Chile)

    2010-03-15

    An effective fluid description, for a brane world model in five dimensions, is discussed for both signs of the brane tension. We found several cosmological scenarios where the effective equation differs widely from the bare equation of state. For universes with negative brane tension, with a bare fluid satisfying the strong energy condition, the effective fluid can cross the barrier {omega} {sub eff}=-1. (orig.)

  7. Towards a description of interactive psychoinformation systems preliminary remarks

    CERN Document Server

    Juriev, D V

    1994-01-01

    An approach to description of interactive psychoinformation systems, based on the concept of "virtualization" and essentially using the technique of the "secondary image synthesis" (adap-org/9409002), is sketched. The article has a rather discussional character and maybe considered as a comment to some statements of the introduction to the author's paper "Complex projective geometry and quantum projective field theory" (Theor. Math. Phys., 1994).

  8. Description of deformed nuclei in the sdg boson model

    CERN Document Server

    Li, S C

    1996-01-01

    We present a study of deformed nuclei in the framework of the sdg interacting boson model utilizing both numerical diagonalization and analytical 1/N expansion techniques. The focus is on description of high-spin states which have recently become computationally accessible through the use of computer algebra in the 1/N expansion formalism. A systematic study is made of high-spin states in rare-earth and actinide nuclei.

  9. Theoretical descriptions of compound-nuclear reactions: open problems & challenges

    CERN Document Server

    Carlson, Brett V; Hussein, Mahir S

    2014-01-01

    Compound-nuclear processes play an important role for nuclear physics applications and are crucial for our understanding of the nuclear many-body problem. Despite intensive interest in this area, some of the available theoretical developments have not yet been fully tested and implemented. We revisit the general theory of compound-nuclear reactions, discuss descriptions of pre-equilibrium reactions, and consider extensions that are needed in order to get cross section information from indirect measurements.

  10. Microscopic descriptions of high-energy heavy-ion collisions

    Energy Technology Data Exchange (ETDEWEB)

    Bodmer, A.R.

    1977-01-01

    The essentials of the equation-of-motion (EOM) approach are given and some of its significant and interesting results are described. A framework for the theoretical description of high-energy heavy-ion (HE-HI) collisions is presented; specifically included are a critical assessment of various approaches--EOM calculations, Boltzmann equations/cascade calculations, and hydrodynamics--their relationships and their respective domains of applicability, if any, to HE-HI collisions. 11 figures, 3 tables. (RWR)

  11. A Descriptive Study of a Perioperative Pain Service Program

    Science.gov (United States)

    2013-01-31

    size. Pain impulses are carried primarily on two types of fibers, the A- delta and C fibers. A-delta fibers are myelinated and carry nociceptive ...thesis entitled: "A DESCRIPTIVE STUDY OF A PERIOPERATIVE PAIN SERVICE PROGRAM" beyond brief exerpts is with the permission of the copyright owner, and...IV ABSTRACT Postoperative pain remains one of the most common and difficult problems encountered in clinical practice. Pain can affect numerous

  12. Worldline description of the Isgur-Wise function

    CERN Document Server

    Stefanis, N G; Ktorides, C N

    1996-01-01

    An effective field theoretic description of the Isgur-Wise function in heavy-meson transitions is presented which emulates soft interactions by a fermion worldline with an infinitesimal self-intersecting loop. A point-splitting regularization technique is used, which replaces pointlike worldlines by ``ribbons'' in the sense of Witten. The calculated vertex function is correctly normalized, does not depend on the heavy-quark mass, and complies with different sets of recent experimental data of the ARGUS and CLEO collaborations.

  13. Web Service Description and Discovery Based on Semantic Model

    Institute of Scientific and Technical Information of China (English)

    YANG Xuemei; XU Lizhen; DONG Yisheng; WANG Yongli

    2006-01-01

    A novel semantic model of Web service description and discovery was proposed through an extension for profile model of Web ontology language for services (OWL-S) in this paper.Similarity matching of Web services was implemented through computing weighted summation of semantic similarity value based on specific domain ontology and dynamical satisfy extent evaluation for quality of service (QoS).Experiments show that the provided semantic matching model is efficient.

  14. Automatic TLI recognition system. Part 1: System description

    Energy Technology Data Exchange (ETDEWEB)

    Partin, J.K.; Lassahn, G.D.; Davidson, J.R.

    1994-05-01

    This report describes an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system uses image data fusion and gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. This volume gives a general description of the ATR system.

  15. Saturated porous continua in the frame of hybrid description

    Science.gov (United States)

    Brazgina, Olga V.; Ivanova, Elena A.; Vilchevskaya, Elena N.

    2016-09-01

    A method for modeling fluid-solid interactions in saturated porous media is proposed. The main challenge is the combination of the material and spatial descriptions. The deformation of the solid, which serves as a "container" to the fluid, is studied by following the motion of its material particles, i.e., in Lagrangian description. On the other hand, the motion of the fluid is described in spatial form, i.e., by using a Eulerian approach. However, the solid deforms and this implies a certain difference regarding the standard formulation used in spatial description of fluid mechanics where a fixed grid dissects space into elementary volumes. Here the grid is no longer fixed, and the elementary volumes will follow the deformation of the solid. Moreover, for the solid as well as for the fluid the balance equations are formulated in the current configuration, where interaction forces and couples are taken into account. By using Zhilin's approach, entropy and temperature are incorporated in the system of equations. Constitutive equations are constructed for both elastic and inelastic components of force and couple stress tensors and interaction force and couple. The constitutive equations for elastic components are found on the basis of the energy balance equation; the constitutive equations for the inelastic components are proposed in accordance with the second law of thermodynamics. Particular emphasis is placed on the constitutive equations of the interaction force and couple, which result in a symmetric form only because of the "hybrid" approach combining the Lagrangian with the Eulerian description. Three possible examples of application of the theory have been presented. For each example, all required assumptions were first stated and discussed and then the complete set of the corresponding equations was presented.

  16. UTM TCL 2.0 Software Version Description (SVD) Document

    Science.gov (United States)

    Mcguirk, Patrick

    2017-01-01

    This is the Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level(TCL) 2.0 Software Version Description (SVD) document. This UTM TCL 2.0 SVD describes the following four topics: 1. Software Release Contents: A listing of the files comprising this release 2. Installation Instructions: How to install the release and get it running 3. Changes Since Previous Release: General updates since the previous UTM release 4. Known Issues: Known issues and limitations in this release

  17. Using descriptive mark-up to formalize translation quality assessment

    CERN Document Server

    Kutuzov, Andrey

    2008-01-01

    The paper deals with using descriptive mark-up to emphasize translation mistakes. The author postulates the necessity to develop a standard and formal XML-based way of describing translation mistakes. It is considered to be important for achieving impersonal translation quality assessment. Marked-up translations can be used in corpus translation studies; moreover, automatic translation assessment based on marked-up mistakes is possible. The paper concludes with setting up guidelines for further activity within the described field.

  18. Team building in an Elementary School: A Descriptive Case Study

    OpenAIRE

    Holleran, David J.

    1997-01-01

    TEAM BUILDING IN AN ELEMENTARY SCHOOL: A DESCRIPTIVE CASE STUDY David J. Holleran (ABSTRACT) The purpose of this study was to examine the team-building process implemented in an elementary school. Research questions were developed on what team-building activities took place, when the activities took place, what expenses were involved, what the outcomes were, and what the reactions of the staff were towards team building activities implemented at the school. Twen...

  19. Description of individual data items and codes in CRIB

    Science.gov (United States)

    Keefer, Eleanor K.; Calkins, James Alfred

    1978-01-01

    The U.S. Geological Survey's Computerized Resources Information Bank (CRIB) is being made available for public use through the computer facilities of the University of Oklahoma and the General Electric Company, U.S.A. The use of General Electric's worldwide information-services network provides access to the CRIB file to a worldwide clientele. This manual, which consists of two chapters, is intended as a guide to users who wish to interrogate the file. Chapter A contains a description of the CRIB file, information on the use of the GIPSY retrieval system, and a description of the General Electric MARK III Service. Chapter B contains a description of the individual data items in the CRIB record as well as code lists. CRIB consists of a set of variable-length records on the metallic and nonmetallic mineral resources of the United States and other countries. At present, 31,645 records in the master file are being made available. The record contains information on mineral deposits and mineral commodities. Some topics covered are: deposit name, location, commodity information, description of deposit, geology, production, reserves, potential resources, and references. The data are processed by the GIPSY program, which maintains the data file and builds, updates, searches, and prints the records using simple yet versatile command statements. Searching and selecting records is accomplished by specifying the presence, absence, or content of any element of information in the record; these specifications can be logically linked to prepare sophisticated search strategies. Output is available in the form of the complete record, a listing of selected parts of the record, or fixed-field tabulations. The General Electric MARK III Service is a computerized information services network operating internationally by land lines, satellites, and undersea cables. The service is available by local telephone to 500 cities in North America, Western Europe, Australia, Southeast Asia, Japan

  20. Fast Detector Simulation Using Lelaps, Detector Descriptions in GODL

    Energy Technology Data Exchange (ETDEWEB)

    Langeveld, Willy; /SLAC

    2005-07-06

    Lelaps is a fast detector simulation program which reads StdHep generator files and produces SIO or LCIO output files. It swims particles through detectors taking into account magnetic fields, multiple scattering and dE/dx energy loss. It simulates parameterized showers in EM and hadronic calorimeters and supports gamma conversions and decays. In addition to three built-in detector configurations, detector descriptions can also be read from files in the new GODL file format.

  1. One-fluid description of turbulently flowing suspension

    OpenAIRE

    L'vov, Victor S.; Pomyalov, Anna

    2002-01-01

    We suggested a one-fluid model of a turbulent dilute suspension which accounts for the ``two-way'' fluid-particle interactions by $k$-dependent effective density of suspension and additional damping term in the Navier-Stokes equation. We presented analytical description of the particle modification of turbulence including scale invariant suppression of a small $k$ part of turbulent spectrum (independent of the particle response time) and possible enhancemenent of large $k$ region [up to the f...

  2. BTZ black hole entropy: a spin foam model description

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Islas, J Manuel [Instituto de Investigaciones en Matematicas Aplicadas y en Sistemas, Universidad Nacional Autonoma de Mexico, UNAM, A Postal 20-726, 01000, Mexico DF (Mexico)], E-mail: jmgislas@leibniz.iimas.unam.mx

    2008-12-21

    We present a microscopical explanation of the entropy of the BTZ black hole using discrete spin foam models of quantum gravity. The entropy of a black hole is given in geometrical terms which led us to think that its statistical description must be given in terms of a quantum geometry. In this paper we present it in terms of spin foam geometrical observables at the horizon of the black hole.

  3. Cold Vacuum Drying (CVD) Electrical System Design Description

    Energy Technology Data Exchange (ETDEWEB)

    SINGH, G.

    2000-05-01

    This system design description (SDD) provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility (CVDF). This SDD also identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This SDD also provides general guidance for the surveillance, testing, and maintenance of this system.

  4. How name descriptiveness impacts proper name learning in young and older adults.

    Science.gov (United States)

    Fogler, Kethera A; James, Lori E; Crandall, Elizabeth A

    2010-09-01

    To elucidate the impact of name descriptiveness and aging on learning new names, 26 young and 26 healthy older participants learned visibly-descriptive (e.g., Lengthy for a giraffe), psychologically-descriptive (e.g., Classy), and non-descriptive (e.g., Sam) proper names for previously-unknown cartoon characters. More visibly-descriptive names were learned than psychologically- or non-descriptive names, which did not differ from each other. There was also a differential benefit for older adults when the name was visibly-descriptive of the referent, such that older adults learned visibly-descriptive names as well as young adults but there were substantial age-related deficits in learning psychologically- and non-descriptive names.

  5. Phenomenological description of anisotropy effects in some ferromagnetic superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Shopova, Diana V., E-mail: sho@issp.bas.bg [TCCM Research Group, Institute of Solid State Physics, Bulgarian Academy of Sciences, BG-1784 Sofia (Bulgaria); Todorov, Michail D. [Department of Applied Mathematics and Computer Science, Technical University of Sofia, 1000 Sofia (Bulgaria)

    2015-07-03

    We study phenomenologically the role of anisotropy in ferromagnetic superconductors UGe{sub 2}, URhGe, and UCoGe for the description of their phase diagrams. We use the Ginzburg–Landau free energy in its uniform form as we will consider only spatially independent solutions. This is an expansion of previously derived results where the effect of Cooper-pair and crystal anisotropies is not taken into account. The three compounds are separately discussed with the special stress on UGe{sub 2}. The main effect comes from the strong uniaxial anisotropy of magnetization while the anisotropy of Cooper pairs and crystal anisotropy only slightly change the phase diagram in the vicinity of Curie temperature. The limitations of this approach are also discussed. - Highlights: • Anisotropic Landau energy for description of ferromagnetic superconductors is proposed. • Meissner phases are described with their existence and stability conditions. • The application of the model to UGe{sub 2} is discussed. • The limitations to apply the model for description of experimental data are explained.

  6. Networked Multiple Description Estimation and Compression with Resource Scalability

    CERN Document Server

    Wu, Xiaolin; Wang, Zhe

    2007-01-01

    We present a joint source-channel multiple description (JSC-MD) framework for resource-constrained network communications (e.g., sensor networks), in which one or many deprived encoders communicate a Markov source against bit errors and erasure errors to many heterogeneous decoders, some powerful and some deprived. To keep the encoder complexity at minimum, the source is coded into K descriptions by a simple multiple description quantizer (MDQ) with neither entropy nor channel coding. The code diversity of MDQ and the path diversity of the network are exploited by decoders to correct transmission errors and improve coding efficiency. A key design objective is resource scalability: powerful nodes in the network can perform JSC-MD distributed estimation/decoding under the criteria of maximum a posteriori probability (MAP) or minimum mean-square error (MMSE), while primitive nodes resort to simpler MD decoding, all working with the same MDQ code. The application of JSC-MD to distributed estimation of hidden Mark...

  7. Reducing uncertainty in geostatistical description with well testing pressure data

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, A.C.; He, Nanqun [Univ. of Tulsa, OK (United States); Oliver, D.S. [Chevron Petroleum Technology Company, La Habra, CA (United States)

    1997-08-01

    Geostatistics has proven to be an effective tool for generating realizations of reservoir properties conditioned to static data, e.g., core and log data and geologic knowledge. Due to the lack of closely spaced data in the lateral directions, there will be significant variability in reservoir descriptions generated by geostatistical simulation, i.e., significant uncertainty in the reservoir descriptions. In past work, we have presented procedures based on inverse problem theory for generating reservoir descriptions (rock property fields) conditioned to pressure data and geostatistical information represented as prior means for log-permeability and porosity and variograms. Although we have shown that the incorporation of pressure data reduces the uncertainty below the level contained in the geostatistical model based only on static information (the prior model), our previous results assumed did not explicitly account for uncertainties in the prior means and the parameters defining the variogram model. In this work, we investigate how pressure data can help detect errors in the prior means. If errors in the prior means are large and are not taken into account, realizations conditioned to pressure data represent incorrect samples of the a posteriori probability density function for the rock property fields, whereas, if the uncertainty in the prior mean is incorporated properly into the model, one obtains realistic realizations of the rock property fields.

  8. Description of the three-phase contact line expansion

    Directory of Open Access Journals (Sweden)

    Váchová Tereza

    2014-03-01

    Full Text Available Knowledge of bubble-particle interaction is important in many industrial processes such as in flotation. While the collision (first interaction sub-process between bubbles and particles is influenced only by hydrodynamic forces, the bubble behaviour during the attachment (second sub-process is influenced both by hydrodynamic and surface forces. This work is focused on the study of the three-phase contact (TPC line expansion during bubble adhesion on hydrophobic surface and on its experimental and mathematical description. The experiments were carried out in pure water where mobile bubble surface is expected. The rising bubble was studied in dynamic arrangement, whereas the stationary bubble was analysed in static arrangement. The attachment process was recorded using a high-speed digital camera and evaluated using image analysis. The diameter of the expanding TPC line as well as the dynamic contact angle was determined. Two approaches - the hydrodynamic and the molecular-kinetic - were used for mathematical description of the TPC line expansion. According to our results, the hydrodynamic model is suitable for the description of the initial fast phase of the expansion. The molecular-kinetic model was assessed as appropriate for almost whole range of TPC expansion. Parameters of the model were evaluated and compared for both types of arrangement.

  9. Tailored work hardening descriptions in simulation of sheet metal forming

    Science.gov (United States)

    Vegter, Henk; Mulder, Hans.; van Liempt, Peter; Heijne, Jan

    2013-12-01

    In the previous decades much attention has been given on an accurate material description, especially for simulations at the design stage of new models in the automotive industry. Improvements lead to shorter design times and a better tailored use of material. It also contributed to the design and optimization of new materials. The current description of plastic material behaviour in simulation models of sheet metal forming is covered by a hardening curve and a yield surface. In this paper the focus will be on modelling of work hardening for advanced high strength steels considering the requirements of present applications. Nowadays work hardening models need to include the effect of hard phases in a soft matrix and the effect of strain rate and temperature on work hardening. Most material tests to characterize work hardening are only applicable to low strains whereas many practical applications require hardening data at relatively high strains. Therefore, physically based hardening descriptions are needed allowing reliable extensions to high strain values.

  10. Description of the three-phase contact line expansion

    Science.gov (United States)

    Váchová, Tereza; Brabcová, Zuzana; Basařová, Pavlína

    2014-03-01

    Knowledge of bubble-particle interaction is important in many industrial processes such as in flotation. While the collision (first interaction sub-process) between bubbles and particles is influenced only by hydrodynamic forces, the bubble behaviour during the attachment (second sub-process) is influenced both by hydrodynamic and surface forces. This work is focused on the study of the three-phase contact (TPC) line expansion during bubble adhesion on hydrophobic surface and on its experimental and mathematical description. The experiments were carried out in pure water where mobile bubble surface is expected. The rising bubble was studied in dynamic arrangement, whereas the stationary bubble was analysed in static arrangement. The attachment process was recorded using a high-speed digital camera and evaluated using image analysis. The diameter of the expanding TPC line as well as the dynamic contact angle was determined. Two approaches - the hydrodynamic and the molecular-kinetic - were used for mathematical description of the TPC line expansion. According to our results, the hydrodynamic model is suitable for the description of the initial fast phase of the expansion. The molecular-kinetic model was assessed as appropriate for almost whole range of TPC expansion. Parameters of the model were evaluated and compared for both types of arrangement.

  11. Hydrodynamic description of spin Calogero-Sutherland model

    Science.gov (United States)

    Abanov, Alexander; Kulkarni, Manas; Franchini, Fabio

    2009-03-01

    We study a non-linear collective field theory for an integrable spin-Calogero-Sutherland model. The hydrodynamic description of this SU(2) model in terms of charge density, charge velocity and spin currents is used to study non-perturbative solutions (solitons) and examine their correspondence with known quantum numbers of elementary excitations [1]. A conventional linear bosonization or harmonic approximation is not sufficient to describe, for example, the physics of spin-charge (non)separation. Therefore, we need this new collective bosonic field description that captures the effects of the band curvature. In the strong coupling limit [2] this model reduces to integrable SU(2) Haldane-Shastry model. We study a non-linear coupling of left and right spin currents which form a Kac-Moody algebra. Our quantum hydrodynamic description for the spin case is an extension for the one found in the spinless version in [3].[3pt] [1] Y. Kato,T. Yamamoto, and M. Arikawa, J. Phys. Soc. Jpn. 66, 1954-1961 (1997).[0pt] [2] A. Polychronakos, Phys Rev Lett. 70,2329-2331(1993).[0pt] [3] A.G.Abanov and P.B. Wiegmann, Phys Rev Lett 95, 076402(2005)

  12. SDL—TRAN—An Interactive Generator for Formal Description Language SDL

    Institute of Scientific and Technical Information of China (English)

    张尧学; 陈桦; 等

    1996-01-01

    SDL(Specification and Description Language)is an international standard formal description language which has been widely used for the specification and description of communication systems.SDL is based on the concept of the state oriented description technique-FSM(Finite State Machine).This paper reports an interactive generator for SDL,named SDL-TRAN,which can automatically translate FSM expression into SDL description.Except for its automatic translation part,SDL-TRAN includes an user-friendly graphical editor which is used to get the other part of SDL description which cannot be automatically translated.

  13. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

  14. Efficient Multiple Description Scalable Video Coding Scheme Based on Weighted Signal Combinations

    Institute of Scientific and Technical Information of China (English)

    ZHAO Anbang; WANG Wensheng; CUI Huijuan; TANG Kun

    2007-01-01

    A simple, efficient multiple description coding (MDC) algorithm was developed based on weighted signal combinations. The scheme uses the standard video encoder with a pre-processing stage to generate multiple descriptions.The decoder then uses a post-proprocessing stage to generate multiple descriptions. The decoder then uses a post-processing algorithm to combine the descriptions to provide better image quality. A scalable codec in the MDC system allows the system to provide multiple descriptions and scalability at the same time. In addition, since the different scalable descriptions may have different qualities, a simple averaging process is not optimal. An optimal weighted combination of the two descriptions was developed based on the signal to noise ratios. Compared with the simple average combination, the algorithm significantly improved the video quality, especially with large quality differences between the two descriptions, with gains of up to 3.56 dB.

  15. Antony van Leeuwenhoek and the description of diaphragmatic flutter (respiratory myoclonus).

    Science.gov (United States)

    Larner, Andrew J

    2005-08-01

    This article reviews the first account of diaphragmatic flutter, published by Antony van Leeuwenhoek, the renowned microscopist, in 1723. The completeness of the clinical description merits the eponymous description of Leeuwenhoek's disease.

  16. Descriptive quantitative analysis of hallux abductovalgus transverse plane radiographic parameters.

    Science.gov (United States)

    Meyr, Andrew J; Myers, Adam; Pontious, Jane

    2014-01-01

    Although the transverse plane radiographic parameters of the first intermetatarsal angle (IMA), hallux abductus angle (HAA), and the metatarsal-sesamoid position (MSP) form the basis of preoperative procedure selection and postoperative surgical evaluation of the hallux abductovalgus deformity, the so-called normal values of these measurements have not been well established. The objectives of the present study were to (1) evaluate the descriptive statistics of the first IMA, HAA, and MSP from a large patient population and (2) to determine an objective basis for defining "normal" versus "abnormal" measurements. Anteroposterior foot radiographs from 373 consecutive patients without a history of previous foot and ankle surgery and/or trauma were evaluated for the measurements of the first IMA, HAA, and MSP. The results revealed a mean measurement of 9.93°, 17.59°, and position 3.63 for the first IMA, HAA, and MSP, respectively. An advanced descriptive analysis demonstrated data characteristics of both parametric and nonparametric distributions. Furthermore, clear differentiations in deformity progression were appreciated when the variables were graphically depicted against each other. This could represent a quantitative basis for defining "normal" versus "abnormal" values. From the results of the present study, we have concluded that these radiographic parameters can be more conservatively reported and analyzed using nonparametric descriptive and comparative statistics within medical studies and that the combination of a first IMA, HAA, and MSP at or greater than approximately 10°, 18°, and position 4, respectively, appears to be an objective "tipping point" in terms of deformity progression and might represent an upper limit of acceptable in terms of surgical deformity correction.

  17. Using Metadata Description for Agriculture and Aquaculture Papers

    Directory of Open Access Journals (Sweden)

    P. Šimek, J. Vaněk, V. Očenášek, M. Stočes, T. Vogeltanzova

    2012-12-01

    Full Text Available The paper deals with the most used metadata formats and thesauri suitable for describing scientific and research papers in the domains agriculture, food industry, aquaculture, environment and rural areas. These include the Dublin Core (DC, Metadata Object Description Schema (MODS, Virtual Open Access Agriculture and Aquaculture Repository Metadata Application Profile (VOA3R AP and the AGROVOC thesaurus. Having analyzed the metadata formats and research paper lifecycle, the authors would recommend that each paper should entail metadata description as soon as it is published. The metadata are to describe the content and properties of the paper. One of the most suitable metadata formats is the VOA3R AP that is partially patterned on the DC and combined with the AGROVOC thesaurus. As a result, an effective description, availability and automatic data exchange between and among local and central repositories should be attained.The knowledge and data presented in the present paper were obtained as a result of the following research programs and grant schemes: the Grant No. 20121044 of the Internal Grant Agency titled „Using Automatic Metadata Generation for Research Papers“, the Grant agreement No. 250525 funded by the European Commission corresponding to the VOA3R Project (Virtual Open Access Agriculture & Aquaculture Repository: Sharing Scientific and Scholarly Research related to Agriculture, Food, and Environment, http://voa3r.eu and the Research Program titled „Economy of the Czech Agriculture Resources and their Efficient Use within the Framework of the Multifunctional Agrifood Systems“ of the Czech Ministry of Education, Youth and Sport number VZ MSM 6046070906.

  18. Analysis of laparoscopic port site complications: A descriptive study

    Directory of Open Access Journals (Sweden)

    Somu Karthik

    2013-01-01

    Full Text Available Context: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. Aims: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Settings and Design: Prospective descriptive study. Materials and Methods: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Statistical Analysis Used: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Results: Of the 570 patients undergoing laparoscopic surgery, 17 (3% had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI was the most frequent (n = 10, 1.8%, followed by port site bleeding (n = 4, 0.7%, omentum-related complications (n = 2; 0.35%, and port site metastasis (n = 1, 0.175%. Conclusions: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

  19. Optimization of neural network algorithm of the land market description

    Directory of Open Access Journals (Sweden)

    M. A. Karpovich

    2016-01-01

    Full Text Available The advantages of neural network technology is shown in comparison of traditional descriptions of dynamically changing systems, which include a modern land market. The basic difficulty arising in the practical implementation of neural network models of the land market and construction products is revealed It is the formation of a representative set of training and test examples. The requirements which are necessary for the correct description of the current economic situation has been determined, it consists in the fact that Train-paid-set in the feature space should not has the ranges with a low density of observations. The methods of optimization of empirical array, which allow to avoid the long-range extrapolation of data from range of concentration of the set of examples are formulated. It is shown that a radical method of optimization a set of training and test examples enclosing to collect supplemantary information, is associated with significant costs time and resources for the economic problems and the ratio of cost / efficiency is less efficient than an algorithm optimization neural network models the earth market fixed set of empirical data. Algorithm of optimization based on the transformation of arrays of information which represents the expansion of the ranges of concentration of the set of examples and compression the ranges of low density of observations is analyzed in details. The significant reduction in the relative error of land price description is demonstrated on the specific example of Voronezh region market of lands which intend for road construction, it makes the using of radical method of empirical optimization of the array costeffective with accounting the significant absolute value of the land. The high economic efficiency of the proposed algorithms is demonstrated.

  20. Towards a worldsheet description of N=8 supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Lipstein, Arthur [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik; Schomerus, Volker [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group

    2015-10-15

    In this note we address the worldsheet description of 4-dimensional N=8 supergravity using ambitwistors. After gauging an appropriate current algebra, we argue that the only physical vertex operators correspond to the N=8 supermultiplet. It has previously been shown that worldsheet correlators give rise to supergravity tree level scattering amplitudes. We extend this work by proposing a definition for genus-one amplitudes that passes several consistency checks such as exhibiting modular invariance and reproducing the expected infrared behavior of 1-loop supergravity amplitudes.

  1. Capillary-wave description of rapid directional solidification.

    Science.gov (United States)

    Korzhenevskii, Alexander L; Bausch, Richard; Schmitz, Rudi

    2012-02-01

    A recently introduced capillary-wave description of binary-alloy solidification is generalized to include the procedure of directional solidification. For a class of model systems a universal dispersion relation of the unstable eigenmodes of a planar steady-state solidification front is derived, which readjusts previously known stability considerations. We moreover establish a differential equation for oscillatory motions of a planar interface that offers a limit-cycle scenario for the formation of solute bands and, taking into account the Mullins-Sekerka instability, of banded structures.

  2. An analytical description of rate effects in timing RPCs

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Diaz, D. [LabCaF, Departamento de Fisica de Particulas, Universidade de Santiago de Compostela, 15782, Santiago de Compostela (Spain)]. E-mail: diego@fpddux.usc.es; Fonte, P. [LIP, Departamento de Fisica, Universidade de Coimbra, 3004-516, Coimbra (Portugal); Instituto Superior de Engenharia de Coimbra, Rua Pedro Nunes, 3030-199, Coimbra (Portugal); Garzon, J.A. [LabCaF, Departamento de Fisica de Particulas, Universidade de Santiago de Compostela, 15782, Santiago de Compostela (Spain); Mangiarotti, A. [Physikalisches Institut der Universitaet Heidelberg, Philosophenweg 12, D-69120, Heidelberg (Germany)

    2006-08-15

    An analytical framework for describing the RPC behavior under high irradiation is proposed, including the effect of the fluctuations of the field. The description is compared with an equivalent MC and data for timing RPCs, showing good agreement. Moreover, the formalism allows to clearly identify the main variables ruling the process. By using the DC electric properties of the plates, the MC allows to reproduce the charging-up process in a dynamic situation, revealing that it takes place at the scale of the relaxation time, varying with the primary rate.

  3. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  4. About the statistical description of gas-liquid flows

    Energy Technology Data Exchange (ETDEWEB)

    Sanz, D.; Guido-Lavalle, G.; Carrica, P. [Centro Atomico Bariloche and Instituto Balseiro (Argentina)] [and others

    1995-09-01

    Elements of the probabilistic geometry are used to derive the bubble coalescence term of the statistical description of gas liquid flows. It is shown that the Boltzmann`s hypothesis, that leads to the kinetic theory of dilute gases, is not appropriate for this kind of flows. The resulting integro-differential transport equation is numerically integrated to study the flow development in slender bubble columns. The solution remarkably predicts the transition from bubbly to slug flow pattern. Moreover, a bubbly bimodal size distribution is predicted, which has already been observed experimentally.

  5. Roberto Del Favero completes the description of Italian forests

    Directory of Open Access Journals (Sweden)

    Paci M

    2010-12-01

    Full Text Available The description of Italian woods by Roberto Del Favero is now completed: after the book dedicated to the “woods of the Alpine regions” and the one concerning the “woods of the southern Italy and Italian islands”, a third book completes the arrangement, aimed to the forest management, of the Italian woods. In the treatise, the strict connection between ecology and silviculture must be underlined: the silvicultural choices are proposed in accordance with ecological requirements of the tree species, as well as to the natural dynamic of stands.

  6. Description innovative practices for archives and special collections

    CERN Document Server

    Theimer, Kate

    2014-01-01

    Description: Innovative Practices for Archives and Special Collections explores how archives of different sizes and types can enhance the accessibility of their holdings. The book uses eleven case studies to demonstrate innovative ideas that could be transferred into many other settings. Readers can use these as models, sources of inspiration, or starting points for new discussions. The volume will be useful to those working in archives and special collections as well as other cultural heritage organizations, and provides ideas ranging from those that require long-term planning and coordinatio

  7. A Compiler for CPPNs: Transforming Phenotypic Descriptions Into Genotypic Representations

    DEFF Research Database (Denmark)

    Risi, Sebastian

    2013-01-01

    . In this paper, as proof of concept, the CPPN-Compiler is able to generate CPPN-encoded representations from vector-based images that can serve as the starting point for further evolution. Importantly, the offspring of these compiled CPPNs show meaningful variations because they directly embody important domain......, the question of how to start evolution from a promising part of the search space becomes more and more important. To address this challenge, we introduce the concept of a CPPN-Compiler, which allows the user to directly compile a high-level description of the desired starting structure into the CPPN itself...

  8. Acceptance Testing Of Web Applications With Test Description Language

    Directory of Open Access Journals (Sweden)

    Łukasz Olek

    2014-01-01

    Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

  9. Towards a unified description of the electroweak nuclear response

    CERN Document Server

    Benhar, Omar

    2015-01-01

    We briefly review the growing efforts to set up a unified framework for the description of neutrino interactions with atomic nuclei and nuclear matter, applicable in the broad kinematical region corresponding to neutrino energies ranging between few MeV and few GeV. The emerging picture suggests that the formalism of nuclear many-body theory can be exploited to obtain the neutrino-nucleus cross sections needed for both the interpretation of oscillation signals and simulation of neutrino transport in compact stars.

  10. Fluid description of multi-component solar partially ionized plasma

    Energy Technology Data Exchange (ETDEWEB)

    Khomenko, E., E-mail: khomenko@iac.es; Collados, M.; Vitas, N. [Instituto de Astrofísica de Canarias, 38205 La Laguna, Tenerife (Spain); Departamento de Astrofísica, Universidad de La Laguna, 38205 La Laguna, Tenerife (Spain); Díaz, A. [Departament de Física, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain)

    2014-09-15

    We derive self-consistent formalism for the description of multi-component partially ionized solar plasma, by means of the coupled equations for the charged and neutral components for an arbitrary number of chemical species, and the radiation field. All approximations and assumptions are carefully considered. Generalized Ohm's law is derived for the single-fluid and two-fluid formalism. Our approach is analytical with some order-of-magnitude support calculations. After general equations are developed, we particularize to some frequently considered cases as for the interaction of matter and radiation.

  11. [Gout and its manifestations, description and treatment in ancient times].

    Science.gov (United States)

    Alušík, Tomáš; Alušík, Štefan

    2015-01-01

    Gout is a very old disease, which exists for thousands of years. The first descriptions interpreted as the symptoms of gout can be found already in the Egyptian medical papyri dating to the 3rd mill. BC. In the Ancient world, many physicians dealt with the causes, diagnostics and the treatments of gout, such as Hippocrates of Cos, Diocles of Carystus or Claudios Galenos. A personified gout (as the goddess Podagra) is also to be found in the Ancient mythology and culture. Several human remnants of the people suffering from gout are preserved from the Antiquity as well.

  12. Reflections on Descriptive Psychology: NASA, Media and Technology, Observation

    Science.gov (United States)

    Aucoin, Paschal J., Jr.

    1999-01-01

    At NASA, we have used methods of Descriptive Psychology (DP) to solve problems in several areas: Simulation of proposed Lunar/Mars missions at high level to assess feasibility and needs in the robotics and automation areas. How we would go about making a "person-like" robot. Design and implementation of Systems Engineering practices on behalf of future projects with emphasis on interoperability. Design of a Question and Answer dialog system to handle student questions about Advanced Life Support (ALS) systems - students learn biology by applying it to ALS projects.

  13. Description of an 8 MW reference wind turbine

    Science.gov (United States)

    Desmond, Cian; Murphy, Jimmy; Blonk, Lindert; Haans, Wouter

    2016-09-01

    An 8 MW wind turbine is described in terms of mass distribution, dimensions, power curve, thrust curve, maximum design load and tower configuration. This turbine has been described as part of the EU FP7 project LEANWIND in order to facilitate research into logistics and naval architecture efficiencies for future offshore wind installations. The design of this 8 MW reference wind turbine has been checked and validated by the design consultancy DNV-GL. This turbine description is intended to bridge the gap between the NREL 5 MW and DTU 10 reference turbines and thus contribute to the standardisation of research and development activities in the offshore wind energy industry.

  14. Global warming description using Daisyworld model with greenhouse gases.

    Science.gov (United States)

    Paiva, Susana L D; Savi, Marcelo A; Viola, Flavio M; Leiroz, Albino J K

    2014-11-01

    Daisyworld is an archetypal model of the earth that is able to describe the global regulation that can emerge from the interaction between life and environment. This article proposes a model based on the original Daisyworld considering greenhouse gases emission and absorption, allowing the description of the global warming phenomenon. Global and local analyses are discussed evaluating the influence of greenhouse gases in the planet dynamics. Numerical simulations are carried out showing the general qualitative behavior of the Daisyworld for different scenarios that includes solar luminosity variations and greenhouse gases effect. Nonlinear dynamics perspective is of concern discussing a way that helps the comprehension of the global warming phenomenon.

  15. New Description Model of Sputtering on Material Surface

    Institute of Scientific and Technical Information of China (English)

    邓柏权; 严建成; 黄锦华; 彭利林

    2003-01-01

    In order to estimate the erosion rates of some plasma facing component materials, the sputtering yields of Mo, W and deuterium-saturated Li bombarded by fusion charged particles are calculated by application of new sputtering physics description methods based on the bipartition model of ion transport theory. The comparisons with Monte Carlo calculation and experimental results are made. These data might be useful to estimate the lifetime of plasma facing components and to analyse the impurity level in core plasma of fusion reactors.

  16. Statistical Description of Pattern Evolution in Damage- Fracture

    Institute of Scientific and Technical Information of China (English)

    夏蒙棼; 白以龙; 柯孚久

    1994-01-01

    A model of dynamical process and stochastic jump has been put forward to study the pattern evolution in damage-fracture According to the final states of evolution processes,the evolution modes can he classified as globally stable modes (GS modes) and evolution induced catastrophic modes (EIC modes); the latter are responsible for fracture A statistical description is introduced to clarify the pattern eolution in this paper It is indicated that the appearance of fracture in disordered materials should be depicted In probability distribution function.

  17. Nonlocal quark model description of a composite Higgs particle

    CERN Document Server

    Kachanovich, Aliaksei

    2016-01-01

    We propose a description of the Higgs boson as top-antitop quark bound state within a nonlocal relativistic quark model of Nambu - Jona-Lasinio type. In contrast to model with local four-fermion interaction, the mass of the scalar bound state can be lighter than the sum of its constituents. This is achieved by adjusting the interaction range and the value of the coupling constant to experimental data, for both the top quark mass and the scalar Higgs boson mass, which can simultaneously be described.

  18. A botanical and pharmacological description of petasites species

    Directory of Open Access Journals (Sweden)

    Tys Jerzy

    2015-09-01

    Full Text Available The objective of this review was to evaluate the botanical and pharmacological description of Petasites species. Petasides (butterbur as a perennial shrub which was found in Europe and also in a parts of Asia and North America, has been widely used medicinally for centuries. At present, the main phytopharmacology uses for Petasides extracts are for prophylactic treatment of migraines, as well as an antispasmodic agent for bronchial asthma and pertussis. Furthermore, it has been used effectively in preventing gastric ulcers, and in urinary tract spasms and treating patients with irritable bladder. But still, there is a need for more studies on the potential applications of butterbur extract in medicine.

  19. Effective harmonic oscillator description of anharmonic molecular vibrations

    Indian Academy of Sciences (India)

    Tapta Kanchan Roy; M Durga Prasad

    2009-09-01

    The validity of an effective harmonic oscillator approximation for anharmonic molecular vibrations is tested and compared with vibrational self consistent field and vibrational configurational interaction results. The effective harmonic oscillator is constructed variationally, by taking the trial wave function as a harmonic oscillator eigenfunction with the centroid and width parameter as variational paraeters. It is found that the effective harmonic oscillator approximation provides a description of the anharmonic eigenstates very similar to the vibrational self consistent field results. Coriolis coupling is also included in these studies.

  20. Burrell-Optical-Kepler Survey (BOKS) I: Survey Description

    Science.gov (United States)

    Feldmeier, John J.; Howell, S.; Harding, P.; Mihos, C.; Rudick, C.; Sherry, W.; Lee, T.; Knox, C.; Ciardi, D.; von Braun, K.; Everett, M.; Proctor, M.; van Belle, G.

    2006-12-01

    The Burrell Optical Kepler Survey (BOKS) is a ground-based, high cadence, stellar variability survey over a portion of the planned science field for the Kepler mission. The survey was carried out at the 0.6m Burrell Schmidt telescope, with an observed field size of 1.36 square degrees. Over 60,000 stars were observed within the BOKS field in the SDSS r-band spanning a time period of 39 days, with a 4.5 minute cadence. We give a basic description of the survey, and calculate the observability function for stellar variablity of different types.

  1. Joint system quantum descriptions arising from local quantumness

    CERN Document Server

    Cooney, Tom; Navascues, Miguel; Perez-Garcia, David; Villanueva, Ignacio

    2012-01-01

    Bipartite correlations generated by non-signalling physical systems that admit a finite-dimensional local quantum description cannot exceed the quantum limits, i.e., they can always be interpreted as distant measurements of a bipartite quantum state. Here we consider the effect of dropping the assumption of finite dimensionality. Remarkably, we find that the same result holds provided that we relax the tensor structure of space-like separated measurements to mere commutativity. We argue why an extension of this result to tensor representations seems unlikely.

  2. Route description in Iwaidja: grammar and conceptualisation of motion

    Directory of Open Access Journals (Sweden)

    Cris Edmonds-Wathen

    2016-09-01

    Full Text Available This study focussed on the effect of grammar of Iwaidja, an indigenous Australian language, on mathematical conceptualisation. It investigated route description in Iwaidja. Spatial concepts such as direction, height and movement in relation to another object are briefly described using examples. Differences between English and Iwaidja are used to illustrate the some of the impact of grammar on mathematical conceptualisation. The implications are discussed in terms of how understanding these grammatical features can help teachers, especially when children are not fluent in the language of instruction, as well as providing keys to cross-linguistic investigations of mathematical cognition.

  3. A Parsimonious and Universal Description of Turbulent Velocity Increments

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, O.E.; Blæsild, P.; Schmiegel, J.

    This paper proposes a reformulation and extension of the concept of Extended Self-Similarity. In support of this new hypothesis, we discuss an analysis of the probability density function (pdf) of turbulent velocity increments based on the class of normal inverse Gaussian distributions. It allows...... for a parsimonious description of velocity increments that covers the whole range of amplitudes and all accessible scales from the finest resolution up to the integral scale. The analysis is performed for three different data sets obtained from a wind tunnel experiment, a free-jet experiment and an atmospheric...

  4. A supplementary description of Brevipalpus californicus (Acari: Trombidiformes: Tenuipalpidae

    Directory of Open Access Journals (Sweden)

    Mohammad Raissi Ardali

    2015-10-01

    Full Text Available The false spider mite Brevipalpus californicus from the family Tenuipalpidae was collected from Caucasian alnus, White willow, Persian raspberry and a wild Chrysanthemum bush in Mazandaran province. This species is reported as a new record to the false spider mites-fauna of Iran here. Reviewing literatures revealed that it was briefly described in the original paper without any measures. So, a completed description is presented based on the Iranian specimens and different body segments are drawn for B. californicus. In addition, the above plants are new host records for B. californicus.

  5. Hamiltonian description of closed configurations of the vacuum magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Skovoroda, A. A., E-mail: skovoroda-aa@nrcki.ru [National Research Centre Kurchatov Institute (Russian Federation)

    2015-05-15

    Methods of obtaining and using the Hamiltonians of closed vacuum magnetic configurations of fusion research systems are reviewed. Various approaches to calculate the flux functions determining the Hamiltonian are discussed. It is shown that the Hamiltonian description allows one not only to reproduce all traditional results, but also to study the behavior of magnetic field lines by using the theory of dynamic systems. The potentialities of the Hamiltonian formalism and its close relation to traditional methods are demonstrated using a large number of classical examples adopted from the fundamental works by A.I. Morozov, L.S. Solov’ev, and V.D. Shafranov.

  6. Analytical methodology and facility description spent fuel policy

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    Three generic environmental impact statements (GEISs) on domestic fuels, foreign fuels, and storage charges are being prepared to provide environmental input into decisions on whether, and if so how the 1977 Presidential policy on spent fuel storage should be implmented. This report provides background information for two of these environmental impact statements: Storage of U.S. Spent Power Reactor Fuel and Storage of Foreign Spent Power Reactor Fuel. It includes the analytical methodology used in GEISs to assess the environmental effects and a description of the facilities used in the two GEISs.

  7. Fluid description of multi-component solar partially ionized plasma

    CERN Document Server

    Khomenko, Elena; Diaz, Antonio; Vitas, Nikola

    2014-01-01

    We derive self-consistent formalism for the description of multi-component partially ionized solar plasma, by means of the coupled equations for the charged and neutral components for an arbitrary number of chemical species, and the radiation field. All approximations and assumptions are carefully considered. Generalized Ohm's law is derived for the single-fluid and two-fluid formalism. Our approach is analytical with some order-of-magnitude support calculations. After general equations are developed we particularize to some frequently considered cases as for the interaction of matter and radiation.

  8. PCR IN TRAUMATOLOGY AND ORTHOPAEDICS: METHOD DESCRIPTION AND APPLICABILITY

    Directory of Open Access Journals (Sweden)

    E. M. Polyakova

    2014-01-01

    Full Text Available Review brief presents description of polymerase chain reaction method (PCR and its most common variants. Three PCR-based lines of research, carried out in the traumatology and orthopaedics, include identifying a causative agents of the implant-associated infection after orthopaedic surgery; detection of antibiotic resistance genes and biofilm forming genes. It was shown that PCR can be used as additional method for detection of genetic disorders, significant for traumatology and orthopaedics, and for investigation of cartilage and bone regeneration.

  9. Practical Design of Delta-Sigma Multiple Description Audio Coding

    DEFF Research Database (Denmark)

    Leegaard, Jack Højholt; Østergaard, Jan; Jensen, Søren Holdt;

    2014-01-01

    framework is suitable for practical low-delay MD audio coding. In particular, we design a practical MD audio coder with two descriptions and provide simulations on real audio data. The simulations demonstrate that even when using low-dimensional noise-shaping, prediction, and resampling filters......, it is possible to obtain good quality audio in the presence of packet losses. Simulations on real audio reveal that, contrary to existing designs, it is straightforward to obtain a large number of trade-off points between side distortion and central distortion, which makes the proposed coder suitable for a wide...

  10. Small Interactive Image Processing System (SMIPS) system description

    Science.gov (United States)

    Moik, J. G.

    1973-01-01

    The Small Interactive Image Processing System (SMIPS) operates under control of the IBM-OS/MVT operating system and uses an IBM-2250 model 1 display unit as interactive graphic device. The input language in the form of character strings or attentions from keys and light pen is interpreted and causes processing of built-in image processing functions as well as execution of a variable number of application programs kept on a private disk file. A description of design considerations is given and characteristics, structure and logic flow of SMIPS are summarized. Data management and graphic programming techniques used for the interactive manipulation and display of digital pictures are also discussed.

  11. Problems and Progress in Covariant High Spin Description

    Science.gov (United States)

    Kirchbach, Mariana; Banda Guzmán, Víctor Miguel

    2016-10-01

    A universal description of particles with spins j > 1, transforming in (j, 0) ⊕ (0, j), is developed by means of representation specific second order differential wave equations without auxiliary conditions and in covariant bases such as Lorentz tensors for bosons, Lorentz-tensors with Dirac spinor components for fermions, or, within the basis of the more fundamental Weyl- Van-der-Waerden sl(2,C) spinor-tensors. At the root of the method, which is free from the pathologies suffered by the traditional approaches, are projectors constructed from the Casimir invariants of the spin-Lorentz group, and the group of translations in the Minkowski space time.

  12. Thermodynamic description of Au-Ag-Si ternary system

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the available experimental information, the Ag-Si binary system was thermodynamically assessed using the CALPHAD method. The solution phases, including liquid, fcc-Al and diamond-A4, were modeled as substitutional solutions, of which the excess Gibbs energies were expressed by Redlich-Kister polynomial functions. Combined with previous assessment of the Ag-Au and Au-Si binary systems, thermodynamic description of the Au-Ag-Si ternary system was performed to reproduce the reported phase equilibria. Thermodynamic properties of liquid alloys, liquidus projection and several vertical and isothermal sections of this ternary system were calculated, which are in reasonable agreement with the reported experimental data.

  13. Logarithmic diffusion and porous media equations: a unified description.

    Science.gov (United States)

    Pedron, I T; Mendes, R S; Buratta, T J; Malacarne, L C; Lenzi, E K

    2005-09-01

    In this work we present the logarithmic diffusion equation as a limit case when the index that characterizes a nonlinear Fokker-Planck equation, in its diffusive term, goes to zero. A linear drift and a source term are considered in this equation. Its solution has a Lorentzian form, consequently this equation characterizes a superdiffusion like a Lévy kind. In addition an equation that unifies the porous media and the logarithmic diffusion equations, including a generalized diffusion equation in fractal dimension, is obtained. This unification is performed in the nonextensive thermostatistics context and increases the possibilities about the description of anomalous diffusive processes.

  14. 850/sup 0/C VHTR plant technical description

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    This report describes the conceptual design of an 842-MW(t) process heat very high temperature reactor (VHTR) plant having a core outlet temperature of 850/sup 0/C (1562/sup 0/F). The reactor is a variation of the high-temperature gas-cooled reactor (HTGR) power plant concept. The report includes a description of the nuclear heat source (NHS) and of the balance of reactor plant (BORP) requirements. The design of the associated chemical process plant is not covered in this report. The reactor design is similar to a previously reported VHTR design having a 950/sup 0/C (1742/sup 0/F) core outlet temperature.

  15. Database Description - RPSD | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available sed for the structure determination, literature information, sequence, the image of the three-dimensional st...this study is to elucidate the correlation of the three-dimensional structures and a function and phenotype ... a useful gene effectively. In this site, you can search the three-dimensional st...ensional structures of the protein of seven kinds of pla...idopsis thaliana Taxonomy ID: 3702 Taxonomy Name: Glycine max Taxonomy ID: 3847 Database description We have determined the three-dim

  16. Problems and Progress in Covariant High Spin Description

    CERN Document Server

    Kirchbach, Mariana

    2016-01-01

    A universal description of particles with spins j greater or equal one , transforming in (j,0)+(0,j), is developed by means of representation specific second order differential wave equations without auxiliary conditions and in covariant bases such as Lorentz tensors for bosons, Lorentz-tensors with Dirac spinor components for fermions, or, within the basis of the more fundamental Weyl-Van-der-Waerden sl(2,C) spinor-tensors. At the root of the method, which is free from the pathologies suffered by the traditional approaches, are projectors constructed from the Casimir invariants of the spin-Lorentz group, and the group of translations in the Minkowski space time.

  17. Stories, descriptions and essays as categories for talking and writing

    Directory of Open Access Journals (Sweden)

    Martín, Beatriz

    2005-04-01

    Full Text Available In this paper, we explore the meaning of the main textual modes (narration, description and exposition in a writing task performed at school. These modes are thought as typical discursive genres in school that are constituted as participants’ categories in this arena. From this point of view, we analyze conversations between student pairs planning a text about a photograph. Each pair planned a text in a different discursive mode depending on the condition they were assigned. Results show that these discursive modes appear in conversations as procedures and resources designed by participants in the conversational process, in order to construct knowledge about the picture, rather than as static schemas.

  18. Reduced Description of Stellar Dynamics by Moments of Gravitation Field

    CERN Document Server

    Stupka, A A

    2016-01-01

    Because of absence of time derivatives from scalar potential as a generalized coordinate of gravitation field (GF) in action of nonrelativistic gravitating system, application of the Hamilton method for description of GF mechanics was impossible. In the paper a transformation of the generalized coordinate of GF, that is based on continuity equation and minimal action principle, is proposed. A potential vector is introduced that is similar to fixing of Hamilton gauge of the electromagnetic field. This transformation gives possibility of the calculation a Hamilton function, removes mathematical troubles of the Jeans theory (Jeans swindle) and allows to construct kinetic theory of GF using statistical mechanics methods.

  19. Description of work for 216-U-Pond test pits

    Energy Technology Data Exchange (ETDEWEB)

    Kelty, G.G.

    1993-08-11

    This description of work (DOW) details the field activities associated with the test pit excavation and soil sampling at the 216- U-10 Pond (U-10 Pond) in the 200 West Area and will serve as a field guide for those performing the work. It will be used in conjunction with the 200-UP-2 Resource Conservation and Recovery Act of 1976 (RCRA) Facility Investigation/Corrective Measures Study (DOE-RL 1993a, [LFI]) and Site Characterization Manual (WHC 1988a). Test pits will be constructed to characterize the vertical extent of contaminants in sediments within and beneath the former U-10 pond.

  20. Unified description of light- and strange-baryon spectra

    CERN Document Server

    Glozman, L Ya; Varga, K; Wagenbrunn, R F

    1998-01-01

    We present a chiral constituent quark model for light and strange baryons providing a unified description of their ground states and excitation spectra. The model relies on constituent quarks and Goldstone bosons arising as effective degrees of freedom of low-energy QCD from the spontaneous breaking of chiral symmetry. The spectra of the three-quark systems are obtained from a precise variational solution of the Schrödinger equation with a semirelativistic Hamiltonian. The theoretical predictions are found in close agreement with experiment.

  1. Utilizing the World Wide Web as an Encyclopedia: Extracting Term Descriptions from Semi-Structured Texts

    OpenAIRE

    Fujii, Atsushi; Ishikawa, Tetsuya

    2000-01-01

    In this paper, we propose a method to extract descriptions of technical terms from Web pages in order to utilize the World Wide Web as an encyclopedia. We use linguistic patterns and HTML text structures to extract text fragments containing term descriptions. We also use a language model to discard extraneous descriptions, and a clustering method to summarize resultant descriptions. We show the effectiveness of our method by way of experiments.

  2. LiveDescribe: Can Amateur Describers Create High-Quality Audio Description?

    Science.gov (United States)

    Branje, Carmen J.; Fels, Deborah I.

    2012-01-01

    Introduction: The study presented here evaluated the usability of the audio description software LiveDescribe and explored the acceptance rates of audio description created by amateur describers who used LiveDescribe to facilitate the creation of their descriptions. Methods: Twelve amateur describers with little or no previous experience with…

  3. Evaluating Pragmatic Competence in Nigerian Undergraduates' Language Errors within Descriptive ESL Writing

    Science.gov (United States)

    Muhammad, Anas Sa'idu; Nair, Subadrah Madhawa

    2017-01-01

    This study investigates the level of pragmatic competence for ESL writing skills among Nigerian undergraduates. Methodologically, it adopts descriptive research design within the explanatory framework of the QUAN-Qual model. The instruments used are descriptive essay text and focus group interview questions. In writing the descriptive essays, a…

  4. 40 CFR 239.4 - Narrative description of state permit program.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Narrative description of state permit program. 239.4 Section 239.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... Narrative description of state permit program. The description of a state's program must include: (a)...

  5. Fair rate allocation of scalable multiple description video for many clients

    NARCIS (Netherlands)

    Taal, R.J.; Lagendijk, R.L.

    2005-01-01

    Peer-to-peer networks (P2P) form a distributed communication infrastructure that is particularly well matched to video streaming using multiple description coding. We form M descriptions using MDC-FEC building on a scalable version of the “Dirac” video coder. The M descriptions are streamed via M di

  6. Corpus-Based Approaches to Language Description for Specialized Academic Writing

    Science.gov (United States)

    Flowerdew, John

    2017-01-01

    Language description is a fundamental requirement for second language (L2) syllabus design. The greatest advances in language description in recent decades have been done with the help of electronic corpora. Such language description is the theme of this article. The article first introduces some basic concepts and principles in corpus research.…

  7. 48 CFR 14.404-4 - Restrictions on disclosure of descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... of descriptive literature. 14.404-4 Section 14.404-4 Federal Acquisition Regulations System FEDERAL... Contract 14.404-4 Restrictions on disclosure of descriptive literature. When a bid is accompanied by descriptive literature (as defined in 2.101), and the bidder imposes a restriction that prevents the...

  8. 48 CFR 1852.214-70 - Caution to offerors furnishing descriptive literature.

    Science.gov (United States)

    2010-10-01

    ... furnishing descriptive literature. 1852.214-70 Section 1852.214-70 Federal Acquisition Regulations System... CLAUSES Texts of Provisions and Clauses 1852.214-70 Caution to offerors furnishing descriptive literature... Descriptive Literature (DEC 1988) Bidders are cautioned against furnishing as a part of their bids...

  9. 29 CFR 2520.102-2 - Style and format of summary plan description.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Style and format of summary plan description. 2520.102-2... Descriptions § 2520.102-2 Style and format of summary plan description. (a) Method of presentation. The summary... than the style, captions, printing type, and prominence used to describe or summarize plan...

  10. Towards a Pattern Language Approach to Document Description

    Directory of Open Access Journals (Sweden)

    Robert Waller

    2012-07-01

    Full Text Available Pattern libraries, originating in architecture, are a common way to share design solutions in interaction design and software engineering. Our aim in this paper is to consider patterns as a way of describing commonly-occurring document design solutions to particular problems, from two points of view. First, we are interested in their use as exemplars for designers to follow, and second, we suggest them as a means of understanding linguistic and graphical data for their organization into corpora that will facilitate descriptive work. We discuss the use of patterns across a range of disciplines before suggesting the need to place patterns in the context of genres, with each potentially belonging to a “home genre” in which it originates and to which it makes an implicit intertextual reference intended to produce a particular reader response in the form of a reading strategy or interpretative stance. We consider some conceptual and technical issues involved in the descriptive study of patterns in naturally-occurring documents, including the challenges involved in building a document corpus.

  11. Specialised structural descriptions for human body parts: Evidence from autotopagnosia.

    Science.gov (United States)

    Buxbaum, L J; Coslett, H B

    2001-06-01

    Previous accounts of autotopagnosia (e.g., Ogden, 1985; Pick, 1908; Semenza, 1988) propose that the disorder is attributable to deficits in "mental images," visual body schema, or semantic representations. A recent account (Sirigu, Grafman, Bressler, & Sunderland, 1991b) posits deficits in visual structural descriptions of the human body and its parts, in the context of spared semantic and proprioceptivespatio-motor body representations, but provides no evidence bearing on the nature or format of the putatively damaged representation. We report data from a man with autotopagnosia consequent to lefthemisphere brain damage which bear directly on the nature of the representation impaired in the disorder. The subject, GL, is unable to localise body parts on himself or others, whether cued by verbal or visual input. In contrast, he uses body parts precisely in reaching and grasping tasks, correctly matches items of clothing to body parts, and localises the parts of animals and man-made objects without error. We also demonstrate that GL is unable to match pictured or real human body parts across shifts in orientation or changes in visual appearance, but can perform analogous matching tasks with animal body parts and man-made object parts. The data extend the account of Sirigu et al. (1991b) in suggesting that human body part localisation depends upon structural descriptions of human (but not animal) bodies that enable viewpoint-independent body part recognition and participate in the calculation of equivalence between the body parts of self and others across transformations in orientation.

  12. LOCAL TEXTURE DESCRIPTION FRAMEWORK FOR TEXTURE BASED FACE RECOGNITION

    Directory of Open Access Journals (Sweden)

    R. Reena Rose

    2014-02-01

    Full Text Available Texture descriptors have an important role in recognizing face images. However, almost all the existing local texture descriptors use nearest neighbors to encode a texture pattern around a pixel. But in face images, most of the pixels have similar characteristics with that of its nearest neighbors because the skin covers large area in a face and the skin tone at neighboring regions are same. Therefore this paper presents a general framework called Local Texture Description Framework that uses only eight pixels which are at certain distance apart either circular or elliptical from the referenced pixel. Local texture description can be done using the foundation of any existing local texture descriptors. In this paper, the performance of the proposed framework is verified with three existing local texture descriptors Local Binary Pattern (LBP, Local Texture Pattern (LTP and Local Tetra Patterns (LTrPs for the five issues viz. facial expression, partial occlusion, illumination variation, pose variation and general recognition. Five benchmark databases JAFFE, Essex, Indian faces, AT&T and Georgia Tech are used for the experiments. Experimental results demonstrate that even with less number of patterns, the proposed framework could achieve higher recognition accuracy than that of their base models.

  13. A Descriptive Characterization of Tree-Adjoining Languages (Full Version)

    CERN Document Server

    Rogers, J

    1998-01-01

    Since the early Sixties and Seventies it has been known that the regular and context-free languages are characterized by definability in the monadic second-order theory of certain structures. More recently, these descriptive characterizations have been used to obtain complexity results for constraint- and principle-based theories of syntax and to provide a uniform model-theoretic framework for exploring the relationship between theories expressed in disparate formal terms. These results have been limited, to an extent, by the lack of descriptive characterizations of language classes beyond the context-free. Recently, we have shown that tree-adjoining languages (in a mildly generalized form) can be characterized by recognition by automata operating on three-dimensional tree manifolds, a three-dimensional analog of trees. In this paper, we exploit these automata-theoretic results to obtain a characterization of the tree-adjoining languages by definability in the monadic second-order theory of these three-dimens...

  14. Descriptive Inorganic Chemistry (by Geoff Rayner-Canham)

    Science.gov (United States)

    Rabinovich, Daniel

    1998-06-01

    Geoff Rayner-Canham. W. H. Freeman: New York, 1996. 492 pp. ISBN: 0-7167-2819-2. $67.95. There are plenty of good inorganic chemistry books on the market, from venerable reference works (e.g., Cotton and Wilkinson's Advanced Inorganic Chemistry, Greenwood and Earnshaw's Chemistry of the Elements) to "comprehensive" two-semester textbooks (e.g., Huheey, Keiter, and Keiter's Inorganic Chemistry: Principles of Structure and Reactivity, Douglas, McDaniel, and Alexander's Concepts and Models of Inorganic Chemistry). Undergraduate students, especially those new to inorganic chemistry, frequently find these books overwhelming in depth and length (not to mention weight!). Alternatively, some shorter books with less ambitious goals present an oversimplified view of the field or sacrifice conceptual material on behalf of sections on environmental, industrial, or biological chemistry. Rayner-Canham's Descriptive Inorganic Chemistry, a one-semester book aimed specifically at the introductory (sophomore) level, provides an excellent balance of theory and descriptive material, with a fresh look at traditional and current areas of interest in inorganic chemistry.

  15. Hopf-Algebra Description of Noncommutative-Space Symmetries

    Science.gov (United States)

    Agostini, Alessandra; Amelino-Camelia, Giovanni; D'Andrea, Francesco

    In the study of certain noncommutative versions of Minkowski space-time a lot remains to be understood for a satisfactory characterization of their symmetries. Adopting as our case study the κ-Minkowski noncommutative space-time, on which a large literature is already available, we propose a line of analysis of noncommutative-space-time symmetries that relies on the introduction of a Weyl map (connecting a given function in the noncommutative Minkowski with a corresponding function in commutative Minkowski). We provide new elements in favor of the expectation that the commutative-space-time notion of Lie-algebra symmetries must be replaced, in the noncommutative-space-time context, by the one of Hopf-algebra symmetries. While previous studies appeared to establish a rather large ambiguity in the description of the Hopf-algebra symmetries of κ-Minkowski, the approach here adopted reduces the ambiguity to the description of the translation generators, and our results, independently of this ambiguity, are sufficient to clarify that some recent studies which argued for an operational indistinguishability between theories with and without a length-scale relativistic invariant, implicitly assumed that the underlying space-time would be classical. Moreover, while usually one describes theories in κ-Minkowski directly at the level of equations of motion, we explore the nature of Hopf-algebra symmetry transformations on an action.

  16. Descriptive markup languages and the development of digital humanities

    Directory of Open Access Journals (Sweden)

    Boris Bosančić

    2012-11-01

    Full Text Available The paper discusses the role of descriptive markup languages in the development of digital humanities, a new research discipline that is part of social sciences and humanities, which focuses on the use of computers in research. A chronological review of the development of digital humanities, and then descriptive markup languages is exposed, through several developmental stages. It is shown that the development of digital humanities since the mid-1980s and the appearance of SGML, markup language that was the foundation of TEI, a key standard for the encoding and exchange of humanities texts in the digital environment, is inseparable from the development of markup languages. Special attention is dedicated to the presentation of the Text Encoding Initiative – TEI development, a key organization that developed the titled standard, both from organizational and markup perspectives. By this time, TEI standard is published in five versions, and during 2000s SGML is replaced by XML markup language. Key words: markup languages, digital humanities, text encoding, TEI, SGML, XML

  17. LanguaL food description: a learning process.

    Science.gov (United States)

    Ireland, J D; Møller, A

    2010-11-01

    The European Food Information Resource (EuroFIR) Network of Excellence (http://www.eurofir.eu) aims to provide validated food composition data (FCD) from European food composition databanks. However, the network covers 27 countries with different languages and food cultures, making comparisons difficult. Moreover, in 2005, only 25% of the databases included international food classification or food description. To overcome some of the challenges, it was decided to use the LanguaL thesaurus (http://www.langual.org) to index (systematically describe) and link the foods in European food composition databases (FCDBs). To facilitate food indexing, LanguaL Food Product Indexer software was introduced and several short (1-2 days) food indexing courses for FCD compilers from all participating countries were organised. Feedback between the LanguaL Technical Committee and the FCD compilers allowed the latter to improve their food indexing skills. In turn, the compilers proposed new descriptors and translations for the thesaurus. The result was a set of more than 26,000 foods in national databases and 2360 foods in specialised data sets that were LanguaL indexed and thus able to be linked to the EuroFIR network. Both the EuroFIR network and the individual FCD compilers benefit from standardised food description, allowing foods to be linked and compared across borders and language barriers. The LanguaL thesaurus has, in turn, benefited from the expertise of the FCDB compilers from different cultures.

  18. Energy study of railroad freight transportation. Volume 2. Industry description

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-08-01

    The United States railroad industry plays a key role in transporting materials to support our industrial economy. One of the oldest industries in the US, the railroads have developed over 150 years into their present physical and operational configuration. Energy conservation proposals to change industry facilities, equipment, or operating practices must be evaluated in terms of their cost impact. A current, comprehensive and accurate data baseline of railroad economic activity and energy consumption is presented. Descriptions of the history of railroad construction in the US and current equipment, facilities, and operation practices follow. Economic models that relate cost and energy of railroad service to the volume of railroad output and to physical and operational parameters are provided. The analyses and descriptions should provide not only an analytical baseline for evaluating the impact of proposed conservation measures, but they should also provide a measure of understanding of the system and its operations to analysts and policy makers who are involved in proposing, analyzing, and implementing such changes.

  19. Preliminary site description Forsmark area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  20. Enhancement of subject description of fiction with annotations

    Directory of Open Access Journals (Sweden)

    Alenka Šauperl

    2007-01-01

    Full Text Available In Slovenia, subject description of fiction was traditionally limited to the Universal Decimal Classification number, which was mainly assigned for shelving. Readers found their books by browsing the library shelves, while librarians had to rely on their personal familiarity with the library collection if they wanted to advise readers on the selection of books. Subject description, such as is often associated with non-literary works, would require a lot of time. Therefore, we wanted to know whether reading book reviews in newspapers could replace reading the entire literary work. We analysed a small sample of book reviews written by literary critics and published in Slovenian newspapers and compared them to the reviews, written by librarians for the same literary works (in the »Priporočamo!« project. We realized that the content is different. However, they could be used for identification of additional subject headings. The same findings resulted from a similar analysis of literary works written for children. Concepts, that seemed potentially appropriate subject headings, often actually do not appear in the Slovenian subject headings or subject headings from the Pionirska knjižnica of Ljubljana. Both subject heading lists should include a larger number of abstract concepts, which more often appear in literary than in non-literary works. Both subject heading lists should also be coordinated.

  1. Contact Term, its Holographic Description in QCD and Dark Energy

    CERN Document Server

    Zhitnitsky, Ariel R

    2011-01-01

    In this work we study the well known contact term, which is the key element in resolving the so-called $U(1)_A$ problem in QCD. We study this term using the dual Holographic Description. We argue that in the dual picture the contact term is saturated by the D2 branes which can be interpreted as the tunnelling events in Minkowski space-time. We present a number of direct lattice results supporting this identification. We also argue that the contact term receives a Casimir -like correction $\\sim (\\Lqcd R)^{-1}$ rather than naively expected $\\exp(-\\Lqcd R)$ when the Minkowski space-time ${\\cal R}_{3,1}$ is replaced by a large but finite manifold with a size $R$. Such a behaviour is consistent with other QFT-based computations when power like corrections are due to nontrivial properties of topological sectors of the theory. In holographic description such a behaviour is due to massless Ramond-Ramond (RR) field living in the bulk of multidimensional space when power like corrections is a natural outcome of massles...

  2. A Multi-Collaborative Ambient Assisted Living Service Description Tool

    Directory of Open Access Journals (Sweden)

    Jorge L. Falcó

    2014-06-01

    Full Text Available Collaboration among different stakeholders is a key factor in the design of Ambient Assisted Living (AAL environments and services. Throughout several AAL projects we have found repeated difficulties in this collaboration and have learned lessons by the experience of solving real situations. This paper highlights identified critical items for collaboration among technicians, users, company and institutional stakeholders and proposes as a communication tool for a project steering committee a service description tool which includes information from the different fields in comprehensible format for the others. It was first generated in the MonAMI project to promote understanding among different workgroups, proven useful there, and further tested later in some other smaller AAL projects. The concept of scalable service description has proven useful for understanding of different disciplines and for participatory decision making throughout the projects to adapt to singularities and partial successes or faults of each action. This paper introduces such tool, relates with existing methodologies in cooperation in AAL and describes it with a example to offer to AAL community. Further work on this tool will significantly improve results in user-centered design of sustainable services in AAL.

  3. Approaching the other: Investigation of a descriptive belief revision model

    Directory of Open Access Journals (Sweden)

    Spyridon Stelios

    2016-12-01

    Full Text Available When an individual—a hearer—is confronted with an opinion expressed by another individual—a speaker—differing from her only in terms of a degree of belief, how will she react? In trying to answer that question this paper reintroduces and investigates a descriptive belief revision model designed to measure approaches. Parameters of the model are the hearer’s credibility account of the speaker, the initial difference between the hearer’s and speaker’s degrees of belief, and the hearer’s resistance to change. Within an interdisciplinary framework, two empirical studies were conducted. A comparison was carried out between empirically recorded revisions and revisions according to the model. Results showed that the theoretical model is highly confirmed. An interesting finding is the measurement of an “unexplainable behaviour” that is not classified either as repulsion or as approach. At a second level of analysis, the model is compared to the Bayesian framework of inference. Structural differences and evidence for optimal descriptive adequacy of the former were highlighted.

  4. Design description of the Tangaye Village photovoltaic power system

    Science.gov (United States)

    Martz, J. E.; Ratajczak, A. F.

    1982-01-01

    The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.

  5. Particle description of zero energy vacuum; 1, Virtual particles

    CERN Document Server

    Grandpeix, J Y

    2002-01-01

    First the "frame problem" is sketched: the motion of an isolated particle obeys a simple law in galilean frames, but how does the galilean character of the frame manifest itself at the place of the particle? A description of vacuum as a system of virtual particles will help to answer this question. For future application to such a description, the notion of global particle is defined and studied. To this end, a systematic use of the Fourier transformation on the Poincare group is needed. The state of a system of n free particles is represented by a statistical operator W, which defines an operator-valued measure on the n-th power of the dual of the Poincare group. The inverse Fourier-Stieltjes transform of that measure is called the characteristic function of the system; it is a function on the n-th power of the Poincare group. The main notion is that of global characteristic function: it is the restriction of the characteristic function to the diagonal subgroup ; it represents the state of the system, consid...

  6. The Effectiveness of FRESH Technique to Teach Descriptive Paragraph

    Directory of Open Access Journals (Sweden)

    Faisal Faisal

    2013-11-01

    Full Text Available This study was aimed at knowing the effectiveness of FRESH technique in teaching descriptive paragraph. The method of this study was quasi experimental method. This study was conducted at one of the state madrasah aliyah in academic year 2012/2013. The total sample of this study was 78 respondents divided into two groups: the control class with no treatment and the experimental class with FRESH technique. The data collection technique used essay tests for pre-test and post-test. The evaluation covered content, organization, vocabulary, style, and mechanic. After data analyses, the students in the experimental class had better achievement than those in the control class. The result of t-test computation was 1.968, with t-table value = 1.664 at the significant level α = 0.05. The t-test result was higher than the value of t-table (1.968 > 1.664. It meant that the hypothesis was accepted or FRESH technique was effective in teaching descriptive paragraph to the students of that school in academic year 2012/2013.

  7. Description and recognition of faces from 3D data

    Science.gov (United States)

    Coombes, Anne M.; Richards, Robin; Linney, Alfred D.; Bruce, Vicki; Fright, Rick

    1992-12-01

    A method based on differential geometry, is presented for mathematically describing the shape of the facial surface. Three-dimensional data for the face are collected by optical surface scanning. The method allows the segmentation of the face into regions of a particular `surface type,' according to the surface curvature. Eight different surface types are produced which all have perceptually meaningful interpretations. The correspondence of the surface type regions to the facial features are easily visualized, allowing a qualitative assessment of the face. A quantitative description of the face in terms of the surface type regions can be produced and the variation of the description between faces is demonstrated. A set of optical surface scans can be registered together and averages to produce an average male and average female face. Thus an assessment of how individuals vary from the average can be made as well as a general statement about the differences between male and female faces. This method will enable an investigation to be made as to how reliably faces can be individuated by their surface shape which, if feasible, may be the basis of an automatic system for recognizing faces. It also has applications in physical anthropology, for classification of the face, facial reconstructive surgery, to quantify the changes in a face altered by reconstructive surgery and growth, and in visual perception, to assess the recognizability of faces. Examples of some of these applications are presented.

  8. Electric energy supply systems: description of available technologies

    Energy Technology Data Exchange (ETDEWEB)

    Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

    1985-02-01

    When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

  9. From information theory to quantitative description of steric effects.

    Science.gov (United States)

    Alipour, Mojtaba; Safari, Zahra

    2016-07-21

    Immense efforts have been made in the literature to apply the information theory descriptors for investigating the electronic structure theory of various systems. In the present study, the information theoretic quantities, such as Fisher information, Shannon entropy, Onicescu information energy, and Ghosh-Berkowitz-Parr entropy, have been used to present a quantitative description for one of the most widely used concepts in chemistry, namely the steric effects. Taking the experimental steric scales for the different compounds as benchmark sets, there are reasonable linear relationships between the experimental scales of the steric effects and theoretical values of steric energies calculated from information theory functionals. Perusing the results obtained from the information theoretic quantities with the two representations of electron density and shape function, the Shannon entropy has the best performance for the purpose. On the one hand, the usefulness of considering the contributions of functional groups steric energies and geometries, and on the other hand, dissecting the effects of both global and local information measures simultaneously have also been explored. Furthermore, the utility of the information functionals for the description of steric effects in several chemical transformations, such as electrophilic and nucleophilic reactions and host-guest chemistry, has been analyzed. The functionals of information theory correlate remarkably with the stability of systems and experimental scales. Overall, these findings show that the information theoretic quantities can be introduced as quantitative measures of steric effects and provide further evidences of the quality of information theory toward helping theoreticians and experimentalists to interpret different problems in real systems.

  10. Nonsingular bouncing cosmology: Consistency of the effective description

    Science.gov (United States)

    Koehn, Michael; Lehners, Jean-Luc; Ovrut, Burt

    2016-05-01

    We explicitly confirm that spatially flat nonsingular bouncing cosmologies make sense as effective theories. The presence of a nonsingular bounce in a spatially flat universe implies a temporary violation of the null energy condition, which can be achieved through a phase of ghost condensation. We calculate the scale of strong coupling and demonstrate that the ghost-condensate bounce remains trustworthy throughout, and that all perturbation modes within the regime of validity of the effective description remain under control. For this purpose we require the perturbed action up to third order in perturbations, which we calculate in both flat and co-moving gauge—since these two gauges allow us to highlight different physical aspects. Our conclusion is that there exist healthy descriptions of nonsingular bouncing cosmologies providing a viable resolution of the big-bang singularities in cosmological models. Our results also suggest a variant of ekpyrotic cosmology, in which entropy perturbations are generated during the contracting phase, but are only converted into curvature perturbations after the bounce.

  11. Preliminary site description Forsmark area - version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    This report presents the interim version (model version 1.1) of the preliminary Site Descriptive Model for Forsmark. The basis for this interim version is quality-assured, geoscientific and ecological field data from Forsmark that were available in the SKB databases SICADA and GIS at April 30, 2003 as well as version 0 of the Site Descriptive Model. The new data acquired during the initial site investigation phase to the date of data freeze 1.1 constitute the basis for the updating of version 0 to version 1.1. These data originate from surface investigations on the candidate area with its regional environment and from drilling and investigations in boreholes. The surface-based data sets were rather extensive whereas the data sets from boreholes were limited to information from one 1,000 m deep cored borehole (KFM01A) and eight 150 to 200 m deep percussion-drilled boreholes in the Forsmark candidate area. Discipline specific models are developed for a selected regional and local model volume and these are then integrated into a site description. The current methodologies for developing the discipline specific models and the integration of these are documented in methodology reports or strategy reports. In the present work, the guidelines given in those reports were followed to the extent possible with the data and information available at the time for data freeze for model version 1.1. Compared with version 0 there are considerable additional features in the version 1.1, especially in the geological description and in the description of the near surface. The geological models of lithology and deformation zones are based on borehole information and much higher resolution surface data. The existence of highly fractured sub-horizontal zones has been verified and these are now part of the model of the deformation zones. A discrete fracture network (DFN) model has also been developed. The rock mechanics model is based on strength information from SFR and an empirical

  12. Description of the magnox type of gas cooled reactor (MAGNOX)

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, S.E.; Nonboel, E

    1999-05-01

    The present report comprises a technical description of the MAGNOX type of reactor as it has been build in Great Britain. The Magnox reactor is gas cooled (CO{sub 2}) with graphite moderators. The fuels is natural uranium in metallic form, canned with a magnesium alloy called 'Magnox'. The Calder Hall Magnox plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other stations are given in tables with a summary of design data. Special design features are also shortly described. Where specific data for Calder Hall Magnox has not been available, corresponding data from other Magnox plants has been used. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 sub-project 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au)

  13. Focused Crawling of the Deep Web Using Service Class Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Rocco, D; Liu, L; Critchlow, T

    2004-06-21

    Dynamic Web data sources--sometimes known collectively as the Deep Web--increase the utility of the Web by providing intuitive access to data repositories anywhere that Web access is available. Deep Web services provide access to real-time information, like entertainment event listings, or present a Web interface to large databases or other data repositories. Recent studies suggest that the size and growth rate of the dynamic Web greatly exceed that of the static Web, yet dynamic content is often ignored by existing search engine indexers owing to the technical challenges that arise when attempting to search the Deep Web. To address these challenges, we present DynaBot, a service-centric crawler for discovering and clustering Deep Web sources offering dynamic content. DynaBot has three unique characteristics. First, DynaBot utilizes a service class model of the Web implemented through the construction of service class descriptions (SCDs). Second, DynaBot employs a modular, self-tuning system architecture for focused crawling of the DeepWeb using service class descriptions. Third, DynaBot incorporates methods and algorithms for efficient probing of the Deep Web and for discovering and clustering Deep Web sources and services through SCD-based service matching analysis. Our experimental results demonstrate the effectiveness of the service class discovery, probing, and matching algorithms and suggest techniques for efficiently managing service discovery in the face of the immense scale of the Deep Web.

  14. Towards health care process description framework: an XML DTD design.

    Science.gov (United States)

    Staccini, P; Joubert, M; Quaranta, J F; Aymard, S; Fieschi, D; Fieschi, M

    2001-01-01

    The development of health care and hospital information systems has to meet users needs as well as requirements such as the tracking of all care activities and the support of quality improvement. The use of process-oriented analysis is of-value to provide analysts with: (i) a systematic description of activities; (ii) the elicitation of the useful data to perform and record care tasks; (iii) the selection of relevant decision-making support. But paper-based tools are not a very suitable way to manage and share the documentation produced during this step. The purpose of this work is to propose a method to implement the results of process analysis according to XML techniques (eXtensible Markup Language). It is based on the IDEF0 activity modeling language (Integration DEfinition for Function modeling). A hierarchical description of a process and its components has been defined through a flat XML file with a grammar of proper metadata tags. Perspectives of this method are discussed.

  15. A Novel RTL Behavioral Description Based ATPG Method

    Institute of Scientific and Technical Information of China (English)

    YIN ZhiGang(尹志刚); MIN YingHua(闵应骅); LI XiaoWei(李晓维); LI HuaWei(李华伟)

    2003-01-01

    The paper proposes a novel ATPG (Automatic Test Pattern Generation) methodbased on RTL (Register Transfer Level) behavioral descriptions in HDL (Hardware DescriptionLanguage). The method is simulation-based. Firstly, it abstracts RTL behavioral descriptionsto Process Controlling Trees (PCT) and Data Dependency Graphs (DDG), which are used forbehavioral simulation and data tracing. Transfer faults are extracted from DDG edges, whichcompose a fault set needed for test generation. Then, simulation begins without specifying inputsin advance, and a request-echo strategy is used to fix some uncertain inputs if necessary. Finally,when the simulation ends, the partially fixed input sequence is the generated test sequence. Theproposed request-echo strategy greatly reduces unnecessary backtracking, and always tries to coveruncovered transfer faults. Therefore, the proposed method is very efficient, and generates tests withgood quality. Experimental results demonstrate that the proposed method is better than ARTISTin three aspects: (1) the CPU time is shorter by three orders of magnitude; (2) the test length isshorter by 52%; and (3) the fault coverage is higher by 0.89%.

  16. Theoretical description of prompt fission neutron multiplicity and spectra

    CERN Document Server

    Manailescu, Cristian

    2014-01-01

    The present work concerns two successful models used today: Point by Point (PbP) and the Monte Carlo approaches. The description of the PbP model and of the extended Los Alamos model for higher energies that takes into account the secondary chains and ways is given in Chapter II. In this chapter are given also examples of PbP and most probable fragmentation approach calculations for various quantities which characterize prompt emission: multi-parametric matrices, quantities as a function of fragment mass, quantities as a function of the TKE and total average quantities, for different spontaneous and neutron induced fissioning systems. Special care was given to the TXE partition between the fully accelerated fission fragments, two partition methods used in the PbP model being discussed in details. In Chapter III is given the description of the Monte Carlo treatment included in the FIFRELIN code. Only those aspects that differ from the PbP treatment are emphasized. A special attention is given to the latest dev...

  17. A Systems Perspective on the Quality Description of Software Components

    Directory of Open Access Journals (Sweden)

    Otto Preiss

    2003-02-01

    Full Text Available In this paper we present our rational for proposing a conceptual model for the description of quality attributes of software artifacts, in particular suited to software components. The scientific foundations for our quality description model are derived from researching systems science for its value to software engineering. In this work we realized that software engineering is concerned with a number of interrelated conceptual as well as concrete systems. Each of them exhibits the basic system theoretic principles and is strongly related to certain types of qualities. Such qualities receive particular attention in the context of large software systems, where systems are a combination of in-house and third party products and are increasingly integrated by means of software component technology. Consequently, a quality data sheet is needed by component users to gain trust in, and to evaluate the possible employment of, a candidate component. Interestingly, the concept of a software component appears in most of the aforementioned different types of systems. Hence, it is an excellent means to carry quality related information that belonged to different spheres up to now. The qualities range from those related to the development economics to those related to the execution performance.

  18. Predicate Argument Structure Analysis for Use Case Description Modeling

    Science.gov (United States)

    Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

    In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.

  19. DESCRIPTIVE STUDY OF HONORIFIC USE IN KOREAN EMAIL DISCOURSE

    Directory of Open Access Journals (Sweden)

    Jaegu Kim

    2016-07-01

    Full Text Available It is a relatively new field that examines how Korean culture affects Korean language use in terms of age difference in a corpus of computer mediated email discourse. The purpose of this descriptive study and experiment is to prove the close relationship between Korean language and culture. This paper shows the descriptive study of Korean culture in relation to language use. Korean culture acknowledges an inherent hierarchy with regard to age, and considers [+age] as relating socially to [+power]. When younger Koreans converse with older ones, they express different morpho-syntactic patterns, which is an age complex. The main task of the experiment was to examine the way through which the age complex is reflected by Korean honorific linguistic system in email discourse. I asked 15 Korean native speakers between the ages of 20 to 25 to write emails expressing an impositive request to [+age (46-50 years old], [-age (below 25 years old] and [=age] recipients. The results show significant differences in the use of grammatical features in emails written to [+age] recipients, as compared to emails written to [-age] and [=age] recipients. The implication of the findings is that the cultural values that are attached to age and aging in the Korean society affects Koreans’ language use, which means Korean language and culture are closely intermingled.

  20. Design description of the Tangaye Village photovoltaic power system

    Science.gov (United States)

    Martz, J. E.; Ratajczak, A. F.

    1982-06-01

    The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.