WorldWideScience

Sample records for bifunctional asymmetric catalysis

  1. Multicatalyst system in asymmetric catalysis

    CERN Document Server

    Zhou, Jian

    2014-01-01

    This book introduces multi-catalyst systems by describing their mechanism and advantages in asymmetric catalysis.  Helps organic chemists perform more efficient catalysis with step-by-step methods  Overviews new concepts and progress for greener and economic catalytic reactions  Covers topics of interest in asymmetric catalysis including bifunctional catalysis, cooperative catalysis, multimetallic catalysis, and novel tandem reactions   Has applications for pharmaceuticals, agrochemicals, materials, and flavour and fragrance

  2. Asymmetric catalysis with helical polymers

    NARCIS (Netherlands)

    Megens, Rik P.; Roelfes, Gerard

    2011-01-01

    Inspired by nature, the use of helical biopolymer catalysts has emerged over the last years as a new approach to asymmetric catalysis. In this Concept article the various approaches and designs and their application in asymmetric catalysis will be discussed.

  3. Asymmetric catalysis with short-chain peptides.

    Science.gov (United States)

    Lewandowski, Bartosz; Wennemers, Helma

    2014-10-01

    Within this review article we describe recent developments in asymmetric catalysis with peptides. Numerous peptides have been established in the past two decades that catalyze a wide variety of transformations with high stereoselectivities and yields, as well as broad substrate scope. We highlight here catalytically active peptides, which have addressed challenges that had thus far remained elusive in asymmetric catalysis: enantioselective synthesis of atropoisomers and quaternary stereogenic centers, regioselective transformations of polyfunctional substrates, chemoselective transformations, catalysis in-flow and reactions in aqueous environments.

  4. Asymmetric trienamine catalysis: new opportunities in amine catalysis.

    Science.gov (United States)

    Kumar, Indresh; Ramaraju, Panduga; Mir, Nisar A

    2013-02-01

    Amine catalysis, through HOMO-activating enamine and LUMO-activating iminium-ion formation, is receiving increasing attention among other organocatalytic strategies, for the activation of unmodified carbonyl compounds. Particularly, the HOMO-raising activation concept has been applied to the greatest number of asymmetric transformations through enamine, dienamine, and SOMO-activation strategies. Recently, trienamine catalysis, an extension of amine catalysis, has emerged as a powerful tool for synthetic chemists with a novel activation strategy for polyenals/polyenones. In this review article, we discuss the initial developments of trienamine catalysis for highly asymmetric Diels-Alder reactions with different dienophiles and emerging opportunities for other types of cycloadditions and cascade reactions.

  5. Applications of Chiral Anions in Asymmetric Catalysis

    OpenAIRE

    Hamilton, Gregory Lawrence

    2011-01-01

    The synthesis of molecules with control over their three-dimensional configuration, known as absolute stereochemistry, is one of the highest goals of synthetic organic chemists. As is so often the case, we strive to reach the facility and efficiency with which Nature achieves this goal. Fortunately, the chemist's imagination allows us to envision nearly unlimited possibilities for new modes of catalysis. In this dissertation, I discuss one branch of asymmetric catalysis that has in a short ti...

  6. Selective Homogeneous Catalysis in Asymmetric Synthesis

    DEFF Research Database (Denmark)

    Fristrup, Peter

    The subject of this thesis is selectivity in homogeneous asymmetric transition metalcatalyzed reactions. Four different reactions within organic chemistry have been studied by kinetic measurements, computational chemistry (modelling) or both of them in parallel. A Hammett study was performed....... A thorough computational study succeeded in explaining the observed results, although other significant results were also obtained during this study. Finally, an intramolecular reaction was studied computationally, and the rate increase observed under phase transfer catalysis conditions could be related...

  7. Enhanced Bifunctional Oxygen Catalysis in Strained LaNiO3 Perovskites

    Energy Technology Data Exchange (ETDEWEB)

    Petrie, Jonathan R.; Cooper, Valentino R.; Freeland, John W.; Meyer, Tricia L.; Zhang, Zhiyong; Lutterman, Daniel A.; Lee, Ho Nyung

    2016-03-02

    Strain is known to greatly influence low temperature oxygen electro catalysis on noble metal films, leading to significant enhancements in bifunctional activity essential for fuel cells and Metal-air batteries. However, its catalytic impact on transition-metal oxide thin films, such as perovskites, is not widely understood. Here, we epitaxially strain the conducting perovskite LaNiO3 to systematically determine its influence on both the oxygen reduction and oxygen evolution reaction. Uniquely, we found that compressive strain could significantly enhance both reactions, yielding a bifunctional catalyst that surpasses the performance of noble metals' such as Pt. We attribute the improved bifunctionality to strain induced splitting of the e(g) Orbitals, which can customize orbital asymmetry at the surface. Analogous to strain induced shifts in the d-band center of noble metals relative to the Fermi level, :such splitting can dramatically affect catalytic activity in this perovskite and other potentially more active Oxides.

  8. Homogeneous asymmetric catalysis in fragrance chemistry.

    Science.gov (United States)

    Ciappa, Alessandra; Bovo, Sara; Bertoldini, Matteo; Scrivanti, Alberto; Matteoli, Ugo

    2008-06-01

    Opposite enantiomers of a chiral fragrance may exhibit different olfactory activities making a synthesis in high enantiomeric purity commercially and scientifically interesting. Accordingly, the asymmetric synthesis of four chiral odorants, Fixolide, Phenoxanol, Citralis, and Citralis Nitrile, has been investigated with the aim to develop practically feasible processes. In the devised synthetic schemes, the key step that leads to the formation of the stereogenic center is the homogeneous asymmetric hydrogenation of a prochiral olefin. By an appropriate choice of the catalyst and the reaction conditions, Phenoxanol, Citralis, and Citralis Nitrile were obtained in high enantiomeric purity, and odor profiles of the single enantiomers were determined.

  9. Development of chiral sulfoxide ligands for asymmetric catalysis.

    Science.gov (United States)

    Trost, Barry M; Rao, Meera

    2015-04-20

    Nitrogen-, phosphorus-, and oxygen-based ligands with chiral backbones have been the historic workhorses of asymmetric transition-metal-catalyzed reactions. On the contrary, sulfoxides containing chirality at the sulfur atom have mainly been used as chiral auxiliaries for diastereoselective reactions. Despite several distinct advantages over traditional ligand scaffolds, such as the proximity of the chiral information to the metal center and the ability to switch between S and O coordination, these compounds have only recently emerged as a versatile class of chiral ligands. In this Review, we detail the history of the development of chiral sulfoxide ligands for asymmetric catalysis. We also provide brief descriptions of metal-sulfoxide bonding and strategies for the synthesis of enantiopure sulfoxides. Finally, insights into the future development of this underutilized ligand class are discussed.

  10. Mechanistic Insights into Homogeneous and Heterogeneous Asymmetric Iron Catalysis

    Science.gov (United States)

    Sonnenberg, Jessica

    Our group has been focused on replacing toxic and expensive precious metal catalysts with iron for the synthesis of enantiopure compounds for industrial applications. During an investigation into the mechanism of asymmetric transfer hydrogenation with our first generation iron-(P-N-N-P) catalysts we found substantial evidence for zero-valent iron nanoparticles coated in chiral ligand acting as the active site. Extensive experimental and computational experiments were undertaken which included NMR, DFT, reaction profile analysis, substoichiometric poisoning, electron microscope imaging, XPS and multiphasic analysis, all of which supported the fact that NPs were the active species in catalysis. Reversibility of this asymmetric reaction on the nanoparticle surface was then probed using oxidative kinetic resolution of racemic alcohols, yielding modest enantiopurity and high turnover frequencies (TOF) for a range of aromatic alcohols. Efficient dehydrogenation of ammonia-borane for hydrogen evolution and the formation of B-N oligomers was also shown using the NP system, yielding highly active systems, with a maximum TOF of 3.66 H2/s-1 . We have also begun to focus on the development of iron catalysts for asymmetric direct hydrogenation of ketones using hydrogen gas. New chiral iron-(P-N-P) catalysts were developed and shown to be quite active and selective for a wide range of substrates. Mechanistic investigations primarily using NMR and DFT indicated that a highly active trans-dihydride species was being formed during catalyst activation. Lastly, a new library of chiral P-N-P and P-NH-P ligands were developed, as well as their corresponding iron complexes, some of which show promise for the development of future generations of active asymmetric direct hydrogenation catalysts.

  11. 双功能手性硫脲催化的不对称Michael加成反应研究进展%Rencent Advances in Asymmetric Michael Addition Catalyzed by Chiral Bifunctional Thioureas

    Institute of Scientific and Technical Information of China (English)

    侯学会; 马志伟; 王建玲; 刘宏民

    2014-01-01

    手性有机小分子催化是近年来不对称催化领域的一个热门研究课题。其具有反应条件温和、环境友好等优点,符合绿色化学的要求。手性氨基-硫脲类催化剂,特别是双功能的手性硫脲,已经在众多的不对称反应中表现出了优秀的催化性能。主要综述了双功能手性硫脲在不对称Michael加成反应中的应用,并对其前景及发展趋势作了展望。%Asymmetric organocatalysis has been a frontier in the field of asymmetric catalysis. The comparable advantages, including mild reaction conditions, environment benign, and so on, render the organocatalytic reaction to possess some fea-tures of green chemistry. Chiral amino-thiourea organocatalyst, especially chiral bifunctional thiourea, has been shown excel-lent catalytic performance in a variety of asymmetric reactions. This review provides an overview of applications of chiral bifunctional thiourea in asymmetry Michael addition reaction, and the prospect and development are depicted finally.

  12. Artificial Metalloenzymes for Asymmetric Catalysis by Creation of Novel Active Sites in Protein and DNA Scaffolds

    NARCIS (Netherlands)

    Drienovska, Ivana; Roelfes, Gerard

    2015-01-01

    Artificial metalloenzymes have emerged as a promising new approach to asymmetric catalysis. In our group, we are exploring novel artificial metalloenzyme designs involving creation of a new active site in a protein or DNA scaffold that does not have an existing binding pocket. In this review, we giv

  13. Direct asymmetric vinylogous Michael addition of cyclic enones to nitroalkenes via dienamine catalysis

    Science.gov (United States)

    Bencivenni, Giorgio; Galzerano, Patrizia; Mazzanti, Andrea; Bartoli, Giuseppe; Melchiorre, Paolo

    2010-01-01

    In spite of the many catalytic methodologies available for the asymmetric functionalization of carbonyl compounds at their α and β positions, little progress has been achieved in the enantioselective carbon–carbon bond formation γ to a carbonyl group. Here, we show that primary amine catalysis provides an efficient way to address this synthetic issue, promoting vinylogous nucleophilicity upon selective activation of unmodified cyclic α,β-unsaturated ketones. Specifically, we document the development of the unprecedented direct and vinylogous Michael addition of β-substituted cyclohexenone derivatives to nitroalkenes proceeding under dienamine catalysis. Besides enforcing high levels of diastereo- and enantioselectivity, chiral primary amine catalysts derived from natural cinchona alkaloids ensure complete γ-site selectivity: The resulting, highly functionalized vinylogous Michael adducts, having two stereocenters at the γ and δ positions, are synthesized with very high fidelity. Finally, we describe the extension of the dienamine catalysis-induced vinylogous nucleophilicity to the asymmetric γ-amination of cyclohexene carbaldehyde. PMID:20566884

  14. Asymmetric Anion-π Catalysis: Enamine Addition to Nitroolefins on π-Acidic Surfaces.

    Science.gov (United States)

    Zhao, Yingjie; Cotelle, Yoann; Avestro, Alyssa-Jennifer; Sakai, Naomi; Matile, Stefan

    2015-09-16

    Here we provide experimental evidence for anion-π catalysis of enamine chemistry and for asymmetric anion-π catalysis. A proline for enamine formation on one side and a glutamic acid for nitronate protonation on the other side are placed to make the enamine addition to nitroolefins occur on the aromatic surface of π-acidic naphthalenediimides. With increasing π acidity of the formally trifunctional catalysts, rate and enantioselectivity of the reaction increase. Mismatched and more flexible controls reveal that the importance of rigidified, precisely sculpted architectures increases with increasing π acidity as well. The absolute configuration of stereogenic sulfoxide acceptors at the edge of the π-acidic surface has a profound influence on asymmetric anion-π catalysis and, if perfectly matched, affords the highest enantio- and diastereoselectivity.

  15. Dual-Doped Molybdenum Trioxide Nanowires: A Bifunctional Anode for Fiber-Shaped Asymmetric Supercapacitors and Microbial Fuel Cells.

    Science.gov (United States)

    Yu, Minghao; Cheng, Xinyu; Zeng, Yinxiang; Wang, Zilong; Tong, Yexiang; Lu, Xihong; Yang, Shihe

    2016-06-01

    A novel in situ N and low-valence-state Mo dual doping strategy was employed to significantly improve the conductivity, active-site accessibility, and electrochemical stability of MoO3 , drastically boosting its electrochemical properties. Consequently, our optimized N-MoO3-x nanowires exhibited exceptional performances as a bifunctional anode material for both fiber-shaped asymmetric supercapacitors (ASCs) and microbial fuel cells (MFCs). The flexible fiber-shaped ASC and MFC device based on the N-MoO3-x anode could deliver an unprecedentedly high energy density of 2.29 mWh cm(-3) and a remarkable power density of 0.76 μW cm(-1) , respectively. Such a bifunctional fiber-shaped N-MoO3-x electrode opens the way to integrate the electricity generation and storage for self-powered sources.

  16. Phase-Transfer Catalysis via a Proton Sponge: A Bifunctional Role for Biscyclopropenimine.

    Science.gov (United States)

    Belding, Lee; Stoyanov, Peter; Dudding, Travis

    2016-01-15

    The use of a bis(diisopropylamino)cyclopropenimine-substituted bis-protonated proton sponge as a bifunctional phase-transfer catalyst is reported. Experimental studies and DFT calculations suggest it operates simultaneously as a hydrogen bond donor and a phase-transfer catalyst, facilitating the movement of charged intermediates from the interface to the organic phase via favorable partitioning of hydrophilic/hydrophobic surface areas, resulting in high catalytic activity. PMID:26649566

  17. Efficient Access to Chiral Benzhydrols via Asymmetric Transfer Hydrogenation of Unsymmetrical Benzophenones with Bifunctional Oxo-Tethered Ruthenium Catalysts.

    Science.gov (United States)

    Touge, Taichiro; Nara, Hideki; Fujiwhara, Mitsuhiko; Kayaki, Yoshihito; Ikariya, Takao

    2016-08-17

    A concise asymmetric transfer hydrogenation of diaryl ketones, promoted by bifunctional Ru complexes with an etherial linkage between 1,2-diphenylethylenediamine (DPEN) and η(6)-arene ligands, was successfully developed. Because of the effective discrimination of substituents at the ortho position on the aryl group, unsymmetrical benzophenones were smoothly reduced in a 5:2 mixture of formic acid and triethylamine with an unprecedented level of excellent enantioselectivity. For the non-ortho-substituted benzophenones, the oxo-tethered catalyst electronically discerned biased substrates, resulting in attractive performance yielding chiral diarylmethanols with >99% ee. PMID:27463264

  18. DIFLUORPHOS and SYNPHOS in asymmetric catalysis: Synthetic applications

    Indian Academy of Sciences (India)

    Sebastien Prevost; Tahar Ayad; Jean-Pierre Genet; Phannarath Phansavath; Virginie Ratovelomanana-Vidal

    2014-03-01

    Enantiomerically pure diphosphines play an important role in various homogeneous metalcatalyzed asymmetric reactions. Over the last few years, our group has been involved in the design and synthesis of atropisomeric ligands named SYNPHOS and DIFLUORPHOS with complementary stereoelectronic properties. This paper shows the high catalytic performances of DIFLUORPHOS, SYNPHOS and SYNPHOS analogues for some C-H and C-C bond forming processes as well as for the synthesis of biorelevant targets.

  19. Quantum chemical study on asymmetric catalysis reduction of imine

    Institute of Scientific and Technical Information of China (English)

    李明; 田安民

    2003-01-01

    The quantum chemical method is employed to study the enantioselective reduction of imine with borane catalyzed by chiral oxazaborolidine. All the structures are optimized completely at the B3LYP/6-31G(d) level. The catalysis property of oxazaborolidine is notable. The reduction goes mainly through the formations of the catalyst-borane adduct, the catalyst-borane-imine adduct, and the catalyst-amidoborane adduct and the dissociation of the catalyst-amidoborane adduct with the regeneration of the catalyst. The controlling step for the reduction is the dissociation of the catalyst-amidoborane adduct. The main reduced product predicted theoretically is (R )-sec- ondary amine, which is in agreement with the experiment.

  20. Developments in asymmetric catalysis by metal complexes of chiral chelating nitrogen-donor ligands.

    Science.gov (United States)

    Caputo, Christine A; Jones, Nathan D

    2007-11-01

    In part because of their straightforward and modular syntheses from readily available enantiopure starting materials, and their capacity to bind a wide variety of transition metals, chiral, chelating nitrogen-donor ligands have played a prominent role in asymmetric catalysis. A large number of highly enantioselective transformations rely upon these ligands whose reported classes are built around amine, imine, pyrrole, pyrrolidine, oxazoline and oxazolidine donor groups, among others. In this Perspective, we examine a selection of transformative developments in asymmetric catalysis by metal complexes of bi- and polydentate members of this ligand family. We describe approaches to ligand design and synthesis, structure and bonding in coordination complexes, and limitations and future challenges. PMID:17940641

  1. Direct asymmetric vinylogous Michael addition of cyclic enones to nitroalkenes via dienamine catalysis

    OpenAIRE

    Bencivenni, Giorgio; Galzerano, Patrizia; Mazzanti, Andrea; Bartoli, Giuseppe; Melchiorre, Paolo

    2010-01-01

    In spite of the many catalytic methodologies available for the asymmetric functionalization of carbonyl compounds at their α and β positions, little progress has been achieved in the enantioselective carbon–carbon bond formation γ to a carbonyl group. Here, we show that primary amine catalysis provides an efficient way to address this synthetic issue, promoting vinylogous nucleophilicity upon selective activation of unmodified cyclic α,β-unsaturated ketones. Specifically, we document the deve...

  2. Michael Addition of Thiols to á,(a)-Unsaturated Carbonyl Compounds Catalyzed by Bifunctional Organocatalysts:Asymmetric Michael Addition and Asymmetric Protonation

    Institute of Scientific and Technical Information of China (English)

    LI Bang-Jing; JIANG Lin; LIU Min; DING Li-Sheng; CHEN Ying-Chun

    2004-01-01

    Recently the hydrogen-bond activated reactions have attracted much attention.1 Takemoto2 reported a highly enantioselective Michael addition of manolate to nitroolefins catalyzed by a bifunctional organocatalyst with tertiary amine and thiourea moiety. As we known,stereoselective conjugate additions of thiols are interesting due to the standpoint of biological and synthetic importance, however, only very limited good results have been obtained except for the works of Shibasaki3, Kanemasa4 and Deng5 et al.In this letter, we report an efficient catalytic asymmetric Michael reactions of thiols to a,a-unsaturated carbonyl compounds promoted by bifunctional organocatalysts. A series of organocatalysts with chiral amine and thiourea structures were designed and synthesized and have been successfully applied in the conjugated additions of thiols to a,a-unsaturated imides and enones.The reactions got quantitative yields and the ee values were up to 84%. It is noteworthy that the a-asymmetric protonation (up to 43% ee) also could be achieved.The Michael addition between aromatic thiols and a,a-unsaturated carbonyl compounds isdescribed as follows:Works to further increase the enantioselectivity is under investigation in our laboratory.

  3. "Click" chemistry mildly stabilizes bifunctional gold nanoparticles for sensing and catalysis.

    Science.gov (United States)

    Li, Na; Zhao, Pengxiang; Liu, Na; Echeverria, María; Moya, Sergio; Salmon, Lionel; Ruiz, Jaime; Astruc, Didier

    2014-07-01

    A large family of bifunctional 1,2,3-triazole derivatives that contain both a polyethylene glycol (PEG) chain and another functional fragment (e.g., a polymer, dendron, alcohol, carboxylic acid, allyl, fluorescence dye, redox-robust metal complex, or a β-cyclodextrin unit) has been synthesized by facile "click" chemistry and mildly coordinated to nanogold particles, thus providing stable water-soluble gold nanoparticles (AuNPs) in the size range 3.0-11.2 nm with various properties and applications. In particular, the sensing properties of these AuNPs are illustrated through the detection of an analogue of a warfare agent (i.e., sulfur mustard) by means of a fluorescence "turn-on" assay, and the catalytic activity of the smallest triazole-AuNPs (core of 3.0 nm) is excellent for the reduction of 4-nitrophenol in water.

  4. Asymmetric catalysis in Brazil: development and potential for advancement of Brazilian chemical industry

    International Nuclear Information System (INIS)

    The preparation of enantiomerically pure or enriched substances is of fundamental importance to pharmaceutical, food, agrochemical, and cosmetics industries and involves a growing market of hundreds of billions of dollars. However, most chemical processes used for their production are not environmentally friendly because in most cases, stoichiometric amounts of chiral inductors are used and substantial waste is produced. In this context, asymmetric catalysis has emerged as an efficient tool for the synthesis of enantiomerically enriched compounds using chiral catalysts. More specifically, considering the current scenario in the Brazilian chemical industry, especially that of pharmaceuticals, the immediate prospect for the use of synthetic routes developed in Brazil in an enantioselective fashion or even the discovery of new drugs is practically null. Currently, the industrial production of drugs in Brazil is primarily focused on the production of generic drugs and is basically supported by imports of intermediates from China and India. In order to change this panorama and move forward toward the gradual incorporation of genuinely Brazilian synthetic routes, strong incentive policies, especially those related to continuous funding, will be needed. These incentives could be a breakthrough once we establish several research groups working in the area of organic synthesis and on the development and application of chiral organocatalysts and ligands in asymmetric catalysis, thus contributing to boost the development of the Brazilian chemical industry. Considering these circumstances, Brazil can benefit from this opportunity because we have a wide biodiversity and a large pool of natural resources that can be used as starting materials for the production of new chiral catalysts and are creating competence in asymmetric catalysis and related areas. This may decisively contribute to the growth of chemistry in our country. (author)

  5. Asymmetric catalysis mediated by the ligand sphere of octahedral chiral-at-metal complexes.

    Science.gov (United States)

    Gong, Lei; Chen, Liang-An; Meggers, Eric

    2014-10-01

    Due to the relationship between structure and function in chemistry, access to novel chemical structures ultimately drives the discovery of novel chemical function. In this light, the formidable utility of the octahedral geometry of six-coordinate metal complexes is founded in its stereochemical complexity combined with the ability to access chemical space that might be unavailable for purely organic compounds. In this Minireview we wish to draw attention to inert octahedral chiral-at-metal complexes as an emerging class of metal-templated asymmetric "organocatalysts" which exploit the globular, rigid nature and stereochemical options of octahedral compounds and promise to provide new opportunities in the field of catalysis.

  6. Asymmetric fluorination of α-branched cyclohexanones enabled by a combination of chiral anion phase-transfer catalysis and enamine catalysis using protected amino acids.

    Science.gov (United States)

    Yang, Xiaoyu; Phipps, Robert J; Toste, F Dean

    2014-04-01

    We report a study involving the successful merger of two separate chiral catalytic cycles: a chiral anion phase-transfer catalysis cycle to activate Selectfluor and an enamine activation cycle, using a protected amino acid as organocatalyst. We have demonstrated the viability of this approach with the direct asymmetric fluorination of α-substituted cyclohexanones to generate quaternary fluorine-containing stereocenters. With these two chiral catalytic cycles operating together in a matched sense, high enantioselectivites can be achieved, and we envisage that this dual catalysis method has the potential to be more broadly applicable, given the breadth of enamine catalysis. It also represents a rare example of chiral enamine catalysis operating successfully on α-branched ketones, substrates commonly inert to this activation mode.

  7. Bifunctional Brønsted Base Catalyzes Direct Asymmetric Aldol Reaction of α-Keto Amides.

    Science.gov (United States)

    Echave, Haizea; López, Rosa; Palomo, Claudio

    2016-03-01

    The first enantioselective direct cross-aldol reaction of α-keto amides with aldehydes, mediated by a bifunctional ureidopeptide-based Brønsted base catalyst, is described. The appropriate combination of a tertiary amine base and an aminal, and urea hydrogen-bond donor groups in the catalyst structure promoted the exclusive generation of the α-keto amide enolate which reacted with either non-enolizable or enolizable aldehydes to produce highly enantioenriched polyoxygenated aldol adducts without side-products resulting from dehydration, α-keto amide self-condensation, aldehyde enolization, and isotetronic acid formation. PMID:26835655

  8. Tight bifunctional hierarchical catalyst.

    Science.gov (United States)

    Højholt, Karen T; Vennestrøm, Peter N R; Tiruvalam, Ramchandra; Beato, Pablo

    2011-12-28

    A new concept to prepare tight bifunctional catalysts has been developed, by anchoring CoMo(6) clusters on hierarchical ZSM-5 zeolites for simultaneous use in HDS and hydrocracking catalysis. The prepared material displays a significant improved activity in HDS catalysis compared to the impregnated counterpart. PMID:22048337

  9. Short synthesis of the C1-C14 stretch of discodermolide from building blocks prepared by asymmetric catalysis.

    Science.gov (United States)

    Cao, Huanyan; Parker, Kathlyn A

    2008-04-01

    A convergent and stereoselective synthesis of the C1-C14 stretch of (+)-discodermolide demonstrates the utility of the "asymmetric catalysis approach" to complex polypropionates. The preparation of this complex synthon requires 15 steps in the longest linear sequence and 19 steps total from inexpensive materials.

  10. One-Pot Catalysis Using a Chiral Iridium Complex/Brønsted Base: Catalytic Asymmetric Synthesis of Catalponol.

    Science.gov (United States)

    Suzuki, Takeyuki; Ismiyarto; Ishizaka, Yuka; Zhou, Da-Yang; Asano, Kaori; Sasai, Hiroaki

    2015-11-01

    Tandem asymmetric hydrogen transfer oxidation/aldol condensation under relay catalysis of a chiral iridium complex/achiral Brønsted base binary system is described for the synthesis of α-benzylidene-γ-hydroxytetralones with high ee's. A two-step synthesis of catalponol was achieved using this sequential methodology together with regio- and stereoselective hydroboration. PMID:26496409

  11. Transition State Models for Understanding the Origin of Chiral Induction in Asymmetric Catalysis.

    Science.gov (United States)

    Sunoj, Raghavan B

    2016-05-17

    In asymmetric catalysis, a chiral catalyst bearing chiral center(s) is employed to impart chirality to developing stereogenic center(s). A rich and diverse set of chiral catalysts is now available in the repertoire of synthetic organic chemistry. The most recent trends point to the emergence of axially chiral catalysts based on binaphthyl motifs, in particular, BINOL-derived phosphoric acids and phosphoramidites. More fascinating ideas took shape in the form of cooperative multicatalysis wherein organo- and transition-metal catalysts are made to work in concert. At the heart of all such manifestations of asymmetric catalysis, classical or contemporary, is the stereodetermining transition state, which holds a perennial control over the stereochemical outcome of the catalytic process. Delving one step deeper, one would find that the origin of the stereoselectivity is delicately dependent on the relative stabilization of one transition state, responsible for the formation of the predominant stereoisomer, over the other transition state for the minor stereoisomer. The most frequently used working hypothesis to rationalize the experimentally observed stereoselectivity places an undue emphasis on steric factors and tends to regard the same as the origin of facial discrimination between the prochiral faces of the reacting partners. In light of the increasing number of asymmetric catalysts that rely on hydrogen bonding as well as other weak non-covalent interactions, it is important to take cognizance of the involvement of such interactions in the sterocontrolling transition states. Modern density functional theories offer a pragmatic and effective way to capture non-covalent interactions in transition states. Aided by the availability of such improved computational tools, it is quite timely that the molecular origin of stereoselectivity is subjected to more intelligible analysis. In this Account, we describe interesting molecular insights into the stereocontrolling

  12. Transition State Models for Understanding the Origin of Chiral Induction in Asymmetric Catalysis.

    Science.gov (United States)

    Sunoj, Raghavan B

    2016-05-17

    In asymmetric catalysis, a chiral catalyst bearing chiral center(s) is employed to impart chirality to developing stereogenic center(s). A rich and diverse set of chiral catalysts is now available in the repertoire of synthetic organic chemistry. The most recent trends point to the emergence of axially chiral catalysts based on binaphthyl motifs, in particular, BINOL-derived phosphoric acids and phosphoramidites. More fascinating ideas took shape in the form of cooperative multicatalysis wherein organo- and transition-metal catalysts are made to work in concert. At the heart of all such manifestations of asymmetric catalysis, classical or contemporary, is the stereodetermining transition state, which holds a perennial control over the stereochemical outcome of the catalytic process. Delving one step deeper, one would find that the origin of the stereoselectivity is delicately dependent on the relative stabilization of one transition state, responsible for the formation of the predominant stereoisomer, over the other transition state for the minor stereoisomer. The most frequently used working hypothesis to rationalize the experimentally observed stereoselectivity places an undue emphasis on steric factors and tends to regard the same as the origin of facial discrimination between the prochiral faces of the reacting partners. In light of the increasing number of asymmetric catalysts that rely on hydrogen bonding as well as other weak non-covalent interactions, it is important to take cognizance of the involvement of such interactions in the sterocontrolling transition states. Modern density functional theories offer a pragmatic and effective way to capture non-covalent interactions in transition states. Aided by the availability of such improved computational tools, it is quite timely that the molecular origin of stereoselectivity is subjected to more intelligible analysis. In this Account, we describe interesting molecular insights into the stereocontrolling

  13. Bifunctional Enantioselective Ligands of Chiral BINOL Derivatives for Asymmetric Addition of Alkynylzinc to Aldehydes

    Institute of Scientific and Technical Information of China (English)

    ZOU Xiao-Wei; ZHENG Li-Fei; WU Ling-Lin; ZONG Li-Li; CHENG Yi-Xiang

    2008-01-01

    Four analogous binaphthyl compounds (R)-3a-3d containing (R)-3,3'-bis(2-pyridyl) groups were synthesized by the conjugation of (R)-2,2'-dimethoxy-1,1'-binaphthyl-3,3'-diboronic acid [(R)-2] with 2-bromopyridine,2-bromo-5-methylpyridine, 2-chloro-4-fluoropyridine and 2-chloro-3-(trifluoromethyl)pyridine via Pd-catalyzed Suzuki reactions, respectively.The application of the four chiral ligands in combination with Et2Zn and Ti(Oi-Pr)4 to the asymmetric addition of phenylacetylene to various aldehydes has been studied.The results show that (R)-3a and (R)-3b are not good catalysts for the alkynylzinc addition to aldehydes, (R)-3d shows good enantioselectivity only for the alkynylzinc addition to aliphatic aldehydes, and (R)-3c exhibits excellent enantioselectivity for phenylethynylzinc addition to both aromatic and aliphatic aldehydes.All the four chiral ligands produced the opposite configuration of the propargylic alcohols to that of the chiral ligands.

  14. Catálise assimétrica na ciclopropanação de olefinas Asymmetric catalysis in the cyclopropanation of olefins

    Directory of Open Access Journals (Sweden)

    Raquel A. C. Leão

    2007-01-01

    Full Text Available The main methodologies in the asymmetric cyclopropanation of alkenes with emphasis on asymmetric catalysis are covered. Exemples are the Simmons-Smith reaction, the use of diazoalkanes and reactions carried out by decomposition of alpha-diazoesters in the presence of transition metals.

  15. Pyrrolidinyl-sulfamide derivatives as a new class of bifunctional organocatalysts for direct asymmetric Michael addition of cyclohexanone to nitroalkenes.

    Science.gov (United States)

    Chen, Jia-Rong; Fu, Liang; Zou, You-Quan; Chang, Ning-Jie; Rong, Jian; Xiao, Wen-Jing

    2011-07-21

    A series of chiral pyrrolidinyl-sulfamide derivatives have been identified as efficient bifunctional organocatalysts for the direct Michael addition of cyclohexanone to a wide range of nitroalkenes. The desired Michael adducts were obtained in high chemical yields and excellent stereoselectivities (up to 99/1 dr and 95% ee).

  16. The Development of Multidimensional Analysis Tools for Asymmetric Catalysis and Beyond.

    Science.gov (United States)

    Sigman, Matthew S; Harper, Kaid C; Bess, Elizabeth N; Milo, Anat

    2016-06-21

    In most modern organic chemistry reports, including many of ours, reaction optimization schemes are typically presented to showcase how reaction conditions have been tailored to augment the reaction's yield and selectivity. In asymmetric catalysis, this often involves evaluation of catalyst, solvent, reagent, and, sometimes, substrate features. Such an article will then detail the process's scope, which mainly focuses on its successes and briefly outlines the "limitations". These limitations or poorer-performing substrates are occasionally the result of obvious, significant changes to structure (e.g., a Lewis basic group binds to a catalyst), but frequently, a satisfying explanation for inferior performance is not clear. This is one of several reasons such results are not often reported. These apparent outliers are also commonplace in the evaluation of catalyst structure, although most of this information is placed in the Supporting Information. These practices are unfortunate because results that appear at first glance to be peculiar or poor are considerably more interesting than ones that follow obvious or intuitive trends. In other words, all of the data from an optimization campaign contain relevant information about the reaction under study, and the "outliers" may be the most revealing. Realizing the power of outliers as an entry point to entirely new reaction development is not unusual. Nevertheless, the concept that no data should be wasted when considering the underlying phenomena controlling the observations of a given reaction is at the heart of the strategy we describe in this Account. The idea that one can concurrently optimize a reaction to expose the structural features that control its outcomes would represent a transformative addition to the arsenal of catalyst development and, ultimately, de novo design. Herein we outline the development of a recently initiated program in our lab that unites optimization with mechanistic interrogation by

  17. 1H-Imidazol-4(5H)-ones and thiazol-4(5H)-ones as emerging pronucleophiles in asymmetric catalysis

    Science.gov (United States)

    Mielgo, Antonia

    2016-01-01

    Summary Asymmetric catalysis represents a very powerful tool for the synthesis of enantiopure compounds. In this context the main focus has been directed not only to the search for new efficient chiral catalysts, but also to the development of efficient pronucleophiles. This review highlights the utility and first examples of 1H-imidazol-4(5H)-ones and thiazol-4(5H)-ones as pronucleophiles in catalytic asymmetric reactions. PMID:27340482

  18. G-quadruplex DNA-based asymmetric catalysis of michael addition: Effects of sonication, ligands, and co-solvents.

    Science.gov (United States)

    Zhao, Hua; Shen, Kai

    2016-07-01

    There is an escalating interest of using double stranded DNA molecules as a chiral scaffold to construct metal-biomacromolecule hybrid catalysts for asymmetric synthesis. Several recent studies also evaluated the use of G-quadruplex DNA-based catalysts for asymmetric Diels-Alder and Friedel-Crafts reactions. However, there is still a lack of understanding of how different oligonucleotides, salts (such as NaCl and KCl), metal ligands and co-solvents affect the catalytic performance of quadruplex DNA-based hybrid catalysts. In this study, we aim to systematically evaluate these key factors in asymmetric Michael addition reactions, and to examine the conformational and molecular changes of DNA by circular dichroism (CD) spectroscopy and gel electrophoresis. We achieved up to 95% yield and 50% enantiomeric excess (ee) when the reaction of 2-acylimidazole 1a and dimethylmalonate was catalyzed by 5'-G3 (TTAG3 )3 -3' (G4DNA1) in 20 mM MOPS (pH 6.5) containing 50 mM KCl and 40 µM [Cu(dmbipy)(NO3 )2 ], and G4DNA1 was pre-sonicated in ice bath for 10 min prior to the reaction. G-quadruplex-based hybrid catalysts provide a new tool for asymmetric catalysis, but future mechanistic studies should be sought to further improve the catalytic efficiency. The current work presents a systematic study of asymmetric Michael addition catalyzed by G-quadruplex catalysts constructed via non-covalent complexing, and an intriguing finding of the effect of pre-sonication on catalytic efficiency. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:891-898, 2016. PMID:27090055

  19. Ligand Self-Sorting and Nonlinear Effects in Dinuclear Asymmetric Hydrogenation: Complexity in Catalysis

    NARCIS (Netherlands)

    Terrade, F.G.; Lutz, M.; Reek, J.N.H.

    2013-01-01

    Nature has been a source of inspiration for scientists as billion years of evolution have resulted in magnificent examples of how processes can be controlled efficiently. In the field of supramolecular catalysis, enzymes have been the major source of inspiration. As such, many synthetic systems have

  20. Synthesis of New Bifunctional Bis(oxazolines) and Their Application in the Asymmetric Cyanosilylation of Aromatic Ketones

    Institute of Scientific and Technical Information of China (English)

    LUO,Mei; DU,Da-Ming

    2004-01-01

    @@ Catalytic asymmetric synthesis of tertiary cyanohydrins by the addition of cyanide to a wide range of ketones has important synthetic utility, since the resulting optically active cyanohydrins are important intermediates for the synthesis of a variety of valuable classes of chiral compounds. The application of oxazoline in asymmetric cyanosilylation has seldom reported in comparation with other reactions.[1] Recently, polymer-supported pyridine-bis(oxazoline) ytterbium complex was reported to catalyze cyanosilylation of benzaldehyde.

  1. Highly Enantioselective Cascade Transformations by Merging Heterogeneous Transition Metal Catalysis with Asymmetric Aminocatalysis

    OpenAIRE

    Luca Deiana; Samson Afewerki; Carlos Palo-Nieto; Oscar Verho; Johnston, Eric V.; Armando Córdova

    2012-01-01

    The concept of combining heterogeneous transition metal and amine catalysis for enantioselective cascade reactions has not yet been realized. This is of great advantage since it would allow for the recycling of expensive and non-environmentally friendly transition metals. We disclose that the use of a heterogeneous Pd-catalyst in combination with a simple chiral amine co-catalyst allows for highly enantioselective cascade transformations. The preparative power of this process has been demonst...

  2. Asymmetric Hydroarylation of Vinylarenes Using a Synergistic Combination of CuH and Pd Catalysis.

    Science.gov (United States)

    Friis, Stig D; Pirnot, Michael T; Buchwald, Stephen L

    2016-07-13

    Detailed in this Communication is the enantioselective synthesis of 1,1-diarylalkanes, a structure found in a range of pharmaceutical drug agents and natural products, through the employment of copper(I) hydride and palladium catalysis. Judicious choice of ligand for both Cu and Pd enabled this hydroarylation protocol to work for an extensive array of aryl bromides and styrenes, including β-substituted vinylarenes and six-membered heterocycles, under relatively mild conditions.

  3. Asymmetric Hydroarylation of Vinylarenes Using a Synergistic Combination of CuH and Pd Catalysis.

    Science.gov (United States)

    Friis, Stig D; Pirnot, Michael T; Buchwald, Stephen L

    2016-07-13

    Detailed in this Communication is the enantioselective synthesis of 1,1-diarylalkanes, a structure found in a range of pharmaceutical drug agents and natural products, through the employment of copper(I) hydride and palladium catalysis. Judicious choice of ligand for both Cu and Pd enabled this hydroarylation protocol to work for an extensive array of aryl bromides and styrenes, including β-substituted vinylarenes and six-membered heterocycles, under relatively mild conditions. PMID:27346525

  4. Asymmetric cyanation of imines via dipeptide-derived organophosphine dual-reagent catalysis

    Science.gov (United States)

    Wang, Hong-Yu; Zheng, Chang-Wu; Chai, Zhuo; Zhang, Jia-Xing; Zhao, Gang

    2016-09-01

    Over the past few decades, enantioselective phosphine organocatalysis has evolved rapidly into a highly efficient catalytic strategy for a range of useful reactions. However, as restricted by the traditional catalytic modes, some important reactions, such as asymmetric Strecker-type reactions, have thus far been out of reach of this strategy. Reported herein is an application of enantioselective phosphine organocatalysis for asymmetric Strecker-type reactions, enabled by a dual-reagent catalyst system in which the key organophosphorus zwitterion intermediate, generated in situ by mixing a chiral dipeptide-derived multifunctional organophosphine with methyl acrylate, is used as a highly efficient chiral Lewis base catalyst. The high efficiency of this catalytic system is demonstrated in the asymmetric cyanation of isatin-derived ketimines and azomethine aldimines as well as in the kinetic resolution of racemic 3-substituted azomethines. Mechanistic studies provide experimental evidence for the intermediacy of the putative zwitterion and its role as a catalytically active Lewis base.

  5. A carbon nanotube confinement strategy to implement homogeneous asymmetric catalysis in the solid phase.

    Science.gov (United States)

    Hashimoto, Kazuki; Kumagai, Naoya; Shibasaki, Masakatsu

    2015-03-01

    A readily recyclable asymmetric catalyst has been developed based on the self-assembly of a homogeneous catalyst in a fibrous network of multiwalled carbon nanotubes (MWNTs). Dimerization of an amide-based chiral ligand with a suitable spacer allows for the efficient formation of a heterogeneous catalyst by self-assembly on addition of Er(OiPr)3. The self-assembly proceeds in the MWNT fibrous network and small clusters of assembled catalyst are confined in the MWNTs, producing an easily handled solid-phase catalyst. The resulting MWNT-confined catalyst exhibits a good catalytic performance in a catalytic asymmetric Mannich-type reaction, which can be conducted in a repeated batch system and in a continuous-flow platform.

  6. Synthesis of Main-Chain Chiral Quaternary Ammonium Polymers for Asymmetric Catalysis Using Quaternization Polymerization

    Directory of Open Access Journals (Sweden)

    Md. Masud Parvez

    2012-06-01

    Full Text Available Main-chain chiral quaternary ammonium polymers were successfully synthesized by the quaternization polymerization of cinchonidine dimer with dihalides. The polymerization occurred smoothly under optimized conditions to give novel type of main-chain chiral quaternary ammonium polymers. The catalytic activity of the polymeric chiral organocatalysts was investigated on the asymmetric benzylation of N-(diphenylmethylideneglycine tert-butyl ester.

  7. Microwave-induced inactivation of DNA-based hybrid catalyst in asymmetric catalysis.

    Science.gov (United States)

    Zhao, Hua; Shen, Kai

    2016-03-01

    DNA-based hybrid catalysts have gained strong interests in asymmetric reactions. However, to maintain the high enantioselectivity, these reactions are usually conducted at relatively low temperatures (e.g. DNA-based hybrid catalyst even at low temperatures (such as 5 °C). Circular dichroism (CD) spectra and gel electrophoresis of DNA suggest that microwave exposure degrades DNA molecules and disrupts DNA double-stranded structures, causing changes of DNA-metal ligand binding properties and thus poor DNA catalytic performance.

  8. Asymmetric α,γ-Regioselective [3 + 3] Formal Cycloadditions of α,β-Unsaturated Aldehydes via Cascade Dienamine-Dienamine Catalysis.

    Science.gov (United States)

    Xiao, Wei; Yin, Xiang; Zhou, Zhi; Du, Wei; Chen, Ying-Chun

    2016-01-01

    Asymmetric α,γ-regioselective [3 + 3] formal cycloadditions of α,β-unsaturated aldehydes and 2-nitroallylic acetates have been developed for the first time. These reactions proceeded through a domino Michael addition-Michael addition sequence via an unusual cascade dienamine-dienamine catalysis of a chiral secondary amine, and multifunctional cyclohexene derivatives were generally constructed in moderate yields with excellent stereoselectivity after simple treatment with K2CO3. PMID:26653774

  9. NeoPHOX – a structurally tunable ligand system for asymmetric catalysis

    Science.gov (United States)

    Padevět, Jaroslav; Schrems, Marcus G; Scheil, Robin

    2016-01-01

    Summary A synthesis of new NeoPHOX ligands derived from serine or threonine has been developed. The central intermediate is a NeoPHOX derivative bearing a methoxycarbonyl group at the stereogenic center next to the oxazoline N atom. The addition of methylmagnesium chloride leads to a tertiary alcohol, which can be acylated or silylated to produce NeoPHOX ligands with different sterical demand. The new NeoPHOX ligands were tested in the iridium-catalyzed asymmetric hydrogenation and palladium-catalyzed allylic substitution. In both reactions high enantioselectivities were achieved, that were comparable to the enantioselectivities obtained with the up to now best NeoPHOX ligand derived from expensive tert-leucine. PMID:27559370

  10. Green chemistry: C-C coupling and asymmetric reduction by innovative catalysis

    Institute of Scientific and Technical Information of China (English)

    Xiaofeng Wu; Jun Mo; Xiaohong Li; Zeyn Hyder; Jianliang Xiao

    2008-01-01

    A catalytic method has been developed, which allows aryl halides to couple with various electron-rich olefins to give 1, 1'-substituted olefins. The palladium-catalysed coupling in ionic liquid solvent proceeds with high efficiency and remarkable regioselectivity without the need for any costly or toxic halide scavengers. Parallel to this, an environmentally-appealing method for the asymmetric reduction of ketones has been established, with which a variety of chiral alcohols can be accessed with high enantioselectivity in water with no need for any organic solvents. The same chemistry has been explored for the reduction of aldehydes, which is shown to be fast and highly chemoselective. These methods add new tools to the armoury of synthetic chemists.

  11. cis-2,5-Diaminobicyclo[2.2.2]octane, a New Chiral Scaffold for Asymmetric Catalysis.

    Science.gov (United States)

    Shaw, Subrata; White, James D

    2016-09-20

    Catalysis of widely used chemical transformations in which the goal is to obtain the product as a pure enantiomer has become a major preoccupation of synthetic organic chemistry over the past three decades. A large number of chiral entities has been deployed to this end, many with considerable success, but one of the simplest and most effective catalytic systems to have emerged from this effort is that based on a chiral diamine, specifically trans-1,2-diaminocyclohexane. While there have been attempts to improve upon this scaffold in asymmetric synthesis, few have gained the recognition needed to take their place alongside this classic diamine. The challenge is to design a scaffold that retains the assets of trans-1,2-diaminocyclohexane while enhancing its intrinsic chirality and maximizing the scope of its applications. It occurred to us that cis-2,5-diaminobicyclo[2.2.2]octane could be such a scaffold. Synthesis of this diamine in enantiopure form was completed from benzoic acid, and the (1R,2R,4R,5R) enantiomer was used in all subsequent experiments in this laboratory. Condensation of the diamine with various salicyl aldehydes generated imine derivatives which proved to be excellent "salen" ligands for encapsulation of transition and other metals. In total, 12 salen-metal complexes were prepared from this ligand, many of which were crystalline and three of which, along with the ligand itself, yielded to X-ray crystallography. An advantage of this ligand is that it can be tuned sterically or electronically to confer specific catalytic properties on the salen-metal complex, and this feature was used in several applications of our salen-metal complexes in asymmetric synthesis. Thus, replacement of one of the tert-butyl groups in each benzenoid ring of the salen ligand by a methoxy substituent enhanced the catalytic efficiency of a cobalt(II)-salen complex used in asymmetric cyclopropanation of 1,1-disubstituted alkenes; the catalyst was employed in an improved

  12. A series of isoreticular chiral metal-organic frameworks as a tunable platform for asymmetric catalysis.

    Science.gov (United States)

    Ma, Liqing; Falkowski, Joseph M; Abney, Carter; Lin, Wenbin

    2010-10-01

    Metal-organic frameworks, built by bridging metal ions with organic linkers, represent a new class of porous hybrid materials with attractive tunability in compositions, structures and functions. In particular, the mild conditions typically employed for their synthesis allow for the functionalization of their building blocks, and thus the rational design of novel materials. Here we demonstrate the systematic design of eight mesoporous chiral metal-organic frameworks, with the framework formula [LCu2(solvent)2] (where L is a chiral tetracarboxylate ligand derived from 1,1'-bi-2-naphthol), that have the same structures but channels of different sizes. Chiral Lewis acid catalysts were generated by postsynthesis functionalization with Ti(OiPr)4, and the resulting materials proved to be highly active asymmetric catalysts for diethylzinc and alkynylzinc additions, which converted aromatic aldehydes into chiral secondary alcohols. The enantioselectivities of these reactions can be modified by tuning the size of the channels, which alters the diffusion rates of the organic substrates.

  13. Metal-ligand bifunctional reactivity and catalysis of protic N-heterocyclic carbene and pyrazole complexes featuring β-NH units.

    Science.gov (United States)

    Kuwata, Shigeki; Ikariya, Takao

    2014-11-28

    Metal-ligand bifunctional cooperation has attracted much attention because it offers a powerful methodology to realize a number of highly efficient and selective catalysts. In this article, recent developments in the metal-ligand cooperative reactions of protic N-heterocyclic carbene (NHC) and pyrazole complexes bearing an acidic NH group at the position β to the metal are surveyed. Protic 2-pyridylidenes as related cooperating non-innocent ligands are also described.

  14. Asymmetric catalysis in Brazil: development and potential for advancement of Brazilian chemical industry; Catalise assimetrica no Brasil: desenvolvimento e potencialidades para o avanco da industria quimica brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Antonio Luiz, E-mail: braga.antonio@ufsc.br [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Departamento de Quimica; Luedtke, Diogo Seibert; Schneider, Paulo Henrique [Universidade Federal do Rio Grande do Sul (UFRS), Porto Alegre, RS (Brazil). Instituto de Quimica; Andrade, Leandro Helgueira [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Quimica; Paixao, Marcio Weber [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Quimica

    2013-07-01

    The preparation of enantiomerically pure or enriched substances is of fundamental importance to pharmaceutical, food, agrochemical, and cosmetics industries and involves a growing market of hundreds of billions of dollars. However, most chemical processes used for their production are not environmentally friendly because in most cases, stoichiometric amounts of chiral inductors are used and substantial waste is produced. In this context, asymmetric catalysis has emerged as an efficient tool for the synthesis of enantiomerically enriched compounds using chiral catalysts. More specifically, considering the current scenario in the Brazilian chemical industry, especially that of pharmaceuticals, the immediate prospect for the use of synthetic routes developed in Brazil in an enantioselective fashion or even the discovery of new drugs is practically null. Currently, the industrial production of drugs in Brazil is primarily focused on the production of generic drugs and is basically supported by imports of intermediates from China and India. In order to change this panorama and move forward toward the gradual incorporation of genuinely Brazilian synthetic routes, strong incentive policies, especially those related to continuous funding, will be needed. These incentives could be a breakthrough once we establish several research groups working in the area of organic synthesis and on the development and application of chiral organocatalysts and ligands in asymmetric catalysis, thus contributing to boost the development of the Brazilian chemical industry. Considering these circumstances, Brazil can benefit from this opportunity because we have a wide biodiversity and a large pool of natural resources that can be used as starting materials for the production of new chiral catalysts and are creating competence in asymmetric catalysis and related areas. This may decisively contribute to the growth of chemistry in our country. (author)

  15. Identifying active surface phases for metal oxide electrocatalysts: a study of manganese oxide bi-functional catalysts for oxygen reduction and water oxidation catalysis

    DEFF Research Database (Denmark)

    Su, Hai-Yan; Gorlin, Yelena; Man, Isabela Costinela;

    2012-01-01

    Progress in the field of electrocatalysis is often hampered by the difficulty in identifying the active site on an electrode surface. Herein we combine theoretical analysis and electrochemical methods to identify the active surfaces in a manganese oxide bi-functional catalyst for the oxygen...... and experimental methods offers an understanding of manganese oxide oxygen electrocatalysis at the atomic level, achieving fundamental insight that can potentially be used to design and develop improved electrocatalysts for the ORR and the OER and other important reactions of technological interest....... reduction reaction (ORR) and the oxygen evolution reaction (OER). First, we electrochemically characterize the nanostructured α-Mn2O3 and find that it undergoes oxidation in two potential regions: initially, between 0.5 V and 0.8 V, a potential region relevant to the ORR and, subsequently, between 0.8 V...

  16. 氢键诱导的不对称催化反应研究进展%Recent progress in asymmetric catalysis induced by hydrogen bonding

    Institute of Scientific and Technical Information of China (English)

    杜曦; 王钦

    2012-01-01

    Hydrogen bonding catalysis has been developed recently in area of asymmetric organocatalysis. Hydrogen bonding activation of carbonyl compounds and imines have attracted much attention as chiral organocatalyst. This review focuses on the chiral thioureas and diols as organocatalyst in hydrogen bonding catalysis. Focus on introducing the catalytic activity of different kinds of chiral thioureas and diols, and their catalytic effect in different varieties of asymmetric catalytic reaction.%氢键催化在不对称有机催化领域已经有了重大进展.手性有机小分子通过氢键活化羰基化合物和亚胺等得到极大的关注.主要对手性硫脲和二醇催化剂的氢键催化进行综述.重点介绍不同手性硫脲和二醇催化剂的催化活性及其在各类不对称催化反应中(包括不对称Strecker反应、Pictet-Spengler反应、Mannich反应、Baylis-Hillman反应、Diels-Alder反应以及Michael反应)的催化效果.

  17. Catalytic Asymmetric Synthesis of Both Enantiomers of 4‑Substituted 1,4-Dihydropyridines with the Use of Bifunctional Thiourea-Ammonium Salts Bearing Different Counterions

    Directory of Open Access Journals (Sweden)

    Kohzo Yoshida

    2010-11-01

    Full Text Available Organoammonium salts composed of a Brønsted acid and an anilinothiourea promoted the Michael addition of β-keto esters and α,β-unsaturated aldehydes in the presence of primary amines to give functionalized 1,4-dihydropyridines enantioselectively. With the use of the different Brønsted acids such as DFA and HBF4 with the same bifunctional thiourea, both enantiomers of 4-substituted 1,4-dihydropyridine were synthesized from the same starting materials.

  18. Asymmetric synthesis of highly substituted β-lactones through oxidative carbene catalysis with LiCl as cooperative Lewis acid.

    Science.gov (United States)

    Bera, Srikrishna; Samanta, Ramesh C; Daniliuc, Constantin G; Studer, Armido

    2014-09-01

    The reaction of enals with β-diketones, β-ketoesters, and malonates bearing a β-oxyalkyl substituent at the α-position by oxidative NHC catalysis to provide highly substituted β-lactones is described. Reactions occur with excellent diastereo- and enantioselectivity. The organo cascade comprises two CC bond formations and one CO bond formation. Up to four contiguous stereogenic centers including two fully substituted stereocenters are formed in the cascade.

  19. Stereodirection of an α-ketoester at sub-molecular sites on chirally modified Pt(111): Heterogeneous asymmetric catalysis

    DEFF Research Database (Denmark)

    Demers-Carpentier, V.; Rasmussen, A.M.H.; Goubert, G.;

    2013-01-01

    Chirally modified Pt catalysts are used in the heterogeneous asymmetric hydrogenation of α-ketoesters. Stereoinduction is believed to occur through the formation of chemisorbed modifier–substrate complexes. In this study, the formation of diastereomeric complexes by coadsorbed methyl 3,3,3-triflu...

  20. Asymmetric epoxidation of cis/trans-β-methylstyrene catalysed by immobilised Mn(salen) with different linkages: heterogenisation of homogeneous asymmetric catalysis.

    Science.gov (United States)

    Zhang, Haidong; Zou, Yu; Wang, Yi-Meng; Shen, Yu; Zheng, Xuxu

    2014-06-16

    Immobilised Mn(salen) catalysts with two different linkages were studied in the asymmetric epoxidation of cis/trans-β-methylstyrene using NaClO as oxidant. The immobilised Mn(salen) complexes inside nanopores can lead to different catalytic behaviour compared with that of homogeneous Jacobsen catalyst. The rigidity of the linkage was found to be a key factor affecting the catalytic performance of immobilised catalysts. The immobilised catalyst with a rigid linkage exhibited comparable chemical selectivity, enantioselectivity and cis/trans ratio of product formation to that obtained with homogeneous Jacobsen catalysts. In contrast, the immobilised catalyst with a flexible linkage gave remarkably lower chemical selectivity, enantioselectivity and inverted cis/trans ratio compared with the results obtained with the homogeneous Jacobsen catalyst and the immobilised catalyst with rigid linkage. Thus, for immobilised Mn(salen) catalysts, a rigid linkage connecting active centres to the support is essential to obtain activity and enantioselectivity as high as those obtained in homogeneous systems.

  1. Asymmetric reactions in continuous flow

    Directory of Open Access Journals (Sweden)

    Xiao Yin Mak

    2009-04-01

    Full Text Available An overview of asymmetric synthesis in continuous flow and microreactors is presented in this review. Applications of homogeneous and heterogeneous asymmetric catalysis as well as biocatalysis in flow are discussed.

  2. Chiral Integrated Catalysts Composed of Bifunctional Thiourea and Arylboronic Acid: Asymmetric Aza-Michael Addition of α,β-Unsaturated Carboxylic Acids.

    Science.gov (United States)

    Hayama, Noboru; Azuma, Takumi; Kobayashi, Yusuke; Takemoto, Yoshiji

    2016-01-01

    The first intermolecular asymmetric Michael addition of nitrogen-nucleophiles to α,β-unsaturated carboxylic acids was achieved through a new type of arylboronic acid equipped with chiral aminothiourea. The use of BnONH2 as a nucleophile gives a range of enantioenriched β-(benzyloxy)amino acid derivatives in good yields and with high enantioselectivity (up to 90% yield, 97% enantiomeric excess (ee)). The obtained products are efficiently converted to optically active β-amino acid and 1,2-diamine derivatives. PMID:27373626

  3. Solid acid catalysis from fundamentals to applications

    CERN Document Server

    Hattori, Hideshi

    2014-01-01

    IntroductionTypes of solid acid catalystsAdvantages of solid acid catalysts Historical overviews of solid acid catalystsFuture outlookSolid Acids CatalysisDefinition of acid and base -Brnsted acid and Lewis acid-Acid sites on surfacesAcid strengthRole of acid sites in catalysisBifunctional catalysisPore size effect on catalysis -shape selectivity-Characterization of Solid Acid Catalysts Indicator methodTemperature programmed desorption (TPD) of ammoniaCalorimetry of adsorption of basic moleculesInfrare

  4. DNA-based hybrid catalysis

    NARCIS (Netherlands)

    Rioz-Martínez, Ana; Roelfes, Gerard

    2015-01-01

    In the past decade, DNA-based hybrid catalysis has merged as a promising novel approach to homogeneous (asymmetric) catalysis. A DNA hybrid catalysts comprises a transition metal complex that is covalently or supramolecularly bound to DNA. The chiral microenvironment and the second coordination sphe

  5. Supramolecular catalysis: Refocusing catalysis

    NARCIS (Netherlands)

    P.W.N.M. van Leeuwen; Z. Freixa

    2008-01-01

    This chapter contains sections titled: * Introduction: A Brief Personal History * Secondary Phosphines or Phosphites as Supramolecular Ligands * Host-Guest Catalysis * Ionic Interactions as a Means to Form Heterobidentate Assembly Ligands * Ditopic Ligands for the Construction of Bidentate Phosphine

  6. Asymmetric catalysis: An enabling science

    OpenAIRE

    Trost, Barry M.

    2004-01-01

    Chirality of organic molecules plays an enormous role in areas ranging from medicine to material science, yet the synthesis of such entities in one enantiomeric form is one of the most difficult challenges. The advances being made stem from the convergence of a broader understanding of theory and how structure begets function, the developments in the interface between organic and inorganic chemistry and, most notably, the organic chemistry of the transition metals, and the continuing advancem...

  7. Asymmetric catalysis in organic synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Reilly, S.D.; Click, D.R.; Grumbine, S.K.; Scott, B.L.; Watkins, J.G.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The goal of the project was to prepare new catalyst systems, which would perform chemical reactions in an enantioselective manner so as to produce only one of the possible optical isomers of the product molecule. The authors have investigated the use of lanthanide metals bearing both diolate and Schiff-base ligands as catalysts for the enantioselective reduction of prochiral ketones to secondary alcohols. The ligands were prepared from cheap, readily available starting materials, and their synthesis was performed in a ''modular'' manner such that tailoring of specific groups within the ligand could be carried out without repeating the entire synthetic procedure. In addition, they have developed a new ligand system for Group IV and lanthanide-based olefin polymerization catalysts. The ligand system is easily prepared from readily available starting materials and offers the opportunity to rapidly prepare a wide range of closely related ligands that differ only in their substitution patterns at an aromatic ring. When attached to a metal center, the ligand system has the potential to carry out polymerization reactions in a stereocontrolled manner.

  8. Heterogeneous Catalysis.

    Science.gov (United States)

    Vannice, M. A.

    1979-01-01

    Described is a graduate course in catalysis offered at Penn State University. A detailed course outline with 30 lecture topics is presented. A list of 42 references on catalysis used in place of a textbook is provided. (BT)

  9. Bifunctional alkaline oxygen electrodes

    Science.gov (United States)

    Swette, L.; Kackley, N.; Mccatty, S. A.

    1991-01-01

    The authors describe the identification and testing of electrocatalysts and supports for the positive electrode of moderate-temperature, single-unit, rechargeable alkaline fuel cells. Recent work on Na(x)Pt3O4, a potential bifunctional catalyst, is described, as well as the application of novel approaches to the development of more efficient bifunctional electrode structures. The three dual-character electrodes considered here showed similar superior performance; the Pt/RhO2 and Rh/RhO2 electrodes showed slightly better performance than the Pt/IrO2 electrode. It is concluded that Na(x)Pt3O4 continues to be a promising bifunctional oxygen electrode catalyst but requires further investigation and development.

  10. Direct sp(3)C-H acroleination of N-aryl-tetrahydroisoquinolines by merging photoredox catalysis with nucleophilic catalysis.

    Science.gov (United States)

    Feng, Zhu-Jia; Xuan, Jun; Xia, Xu-Dong; Ding, Wei; Guo, Wei; Chen, Jia-Rong; Zou, You-Quan; Lu, Liang-Qiu; Xiao, Wen-Jing

    2014-04-01

    Sequence catalysis merging photoredox catalysis (PC) and nucleophilic catalysis (NC) has been realized for the direct sp(3) C-H acroleination of N-aryl-tetrahydroisoquinoline (THIQ). The reaction was performed under very mild conditions and afforded products in 50-91% yields. A catalytic asymmetric variant was proved to be successful with moderate enantioselectivities (up to 83 : 17 er).

  11. Cooperative catalysis designing efficient catalysts for synthesis

    CERN Document Server

    Peters, René

    2015-01-01

    Written by experts in the field, this is a much-needed overview of the rapidly emerging field of cooperative catalysis. The authors focus on the design and development of novel high-performance catalysts for applications in organic synthesis (particularly asymmetric synthesis), covering a broad range of topics, from the latest progress in Lewis acid / Br?nsted base catalysis to e.g. metal-assisted organocatalysis, cooperative metal/enzyme catalysis, and cooperative catalysis in polymerization reactions and on solid surfaces. The chapters are classified according to the type of cooperating acti

  12. DNA-based hybrid catalysis.

    Science.gov (United States)

    Rioz-Martínez, Ana; Roelfes, Gerard

    2015-04-01

    In the past decade, DNA-based hybrid catalysis has merged as a promising novel approach to homogeneous (asymmetric) catalysis. A DNA hybrid catalysts comprises a transition metal complex that is covalently or supramolecularly bound to DNA. The chiral microenvironment and the second coordination sphere interactions provided by the DNA are key to achieve high enantioselectivities and, often, additional rate accelerations in catalysis. Nowadays, current efforts are focused on improved designs, understanding the origin of the enantioselectivity and DNA-induced rate accelerations, expanding the catalytic scope of the concept and further increasing the practicality of the method for applications in synthesis. Herein, the recent developments will be reviewed and the perspectives for the emerging field of DNA-based hybrid catalysis will be discussed.

  13. Asymmetric reduction of ketones by biocatalysis using clementine mandarin (Citrus reticulata) fruit grown in Annaba or by ruthenium catalysis for access to both enantiomers.

    Science.gov (United States)

    Bennamane, Manhel; Zeror, Saoussen; Aribi-Zouioueche, Louisa

    2015-03-01

    Biocatalytic reduction of prochiral ketones using freshly ripened clementine mandarin (Citrus reticulata) in aqueous medium is reported. High enantioselectivities were observed, especially for the bioreduction of indanone , tetralone , and thiochromanone with respectively 95%, 99%, and 86% enantiomeric excess (ee). Enantioselective bio- and metal-catalyzed reactions were compared. Chiral ruthenium catalysts afforded good asymmetric inductions (>75% ee) in most cases, enantiomeric excesses depending on the nature of substrate and ligand. N-aminoindanol prolinamide was revealed as the best ligand for most ketones. Interestingly, for several substrates both enantiomers could be obtained using either Citrus reticulata or ruthenium complex. PMID:25482318

  14. Rencent Advances in Asymmetric Organic Reactions Catalyzed by Bifunctional Amine- thioureas%双官能团硫脲-胺催化剂催化不对称有机反应的研究进展

    Institute of Scientific and Technical Information of China (English)

    史艳娜; 孙传智; 孙南

    2012-01-01

    双官能团硫脲-胺催化剂因在不对称催化反应中表现出的高效、高对映选择性而受到广泛关注,已成功应用于催化各种不对称有机反应中,本文简述了双官能团硫脲-胺催化剂在Michael加成、1,2加成以及Michael-type串联反应中应用的研究进展。%Bifunctional amine -thiourea has received increasing attention as a highly efficient and enantioselective catalyst. It has been used for various reactions extensively. The applications of the catalyst in asyrmnetric Michael addition, 1,2 -addition, Michael- type cascade reaction were reviewed.

  15. Majority-Rules-Type Helical Poly(quinoxaline-2,3-diyl)s as Highly Efficient Chirality-Amplification Systems for Asymmetric Catalysis.

    Science.gov (United States)

    Ke, Yuan-Zhen; Nagata, Yuuya; Yamada, Tetsuya; Suginome, Michinori

    2015-08-01

    A highly efficient majority-rules effect of poly(quinoxaline-2,3-diyl)s (PQXs) bearing 2-butoxymethyl chiral side chains at the 6- and 7-positions was established and attributed to large ΔG(h) values (0.22-0.41 kJ mol(-1)), which are defined as the energy difference between P- and M-helical conformations per chiral unit. A PQX copolymer prepared from a monomer derived from (R)-2-octanol (23% ee) and a monomer bearing a PPh2 group adopted a single-handed helical structure (>99%) and could be used as a highly enantioselective chiral ligand in palladium-catalyzed asymmetric reactions (products formed with up to 94% ee), in which the enantioselectivity could be switched by solvent-dependent inversion of the helical PQX backbone.

  16. Heterogeneous Catalysis.

    Science.gov (United States)

    Miranda, R.

    1989-01-01

    Described is a heterogeneous catalysis course which has elements of materials processing embedded in the classical format of catalytic mechanisms and surface chemistry. A course outline and list of examples of recent review papers written by students are provided. (MVL)

  17. Cyclodextrins in Asymmetric and Stereospecific Synthesis

    Directory of Open Access Journals (Sweden)

    Fliur Macaev

    2015-09-01

    Full Text Available Since their discovery, cyclodextrins have widely been used as green and easily available alternatives to promoters or catalysts of different chemical reactions in water. This review covers the research and application of cyclodextrins and their derivatives in asymmetric and stereospecific syntheses, with their division into three main groups: (1 cyclodextrins promoting asymmetric and stereospecific catalysis in water; (2 cyclodextrins’ complexes with transition metals as asymmetric and stereospecific catalysts; and (3 cyclodextrins’ non-metallic derivatives as asymmetric and stereospecific catalysts. The scope of this review is to systematize existing information on the contribution of cyclodextrins to asymmetric and stereospecific synthesis and, thus, to facilitate further development in this direction.

  18. Synthesis and application of aryl-ferrocenyl(pseudo-biarylic) complexes. Part 5. Design and synthesis of a new type of ferrocene-based planar chiral DMAP analogues. A new catalyst system for asymmetric nucleophilic catalysis

    DEFF Research Database (Denmark)

    Seitzberg, J.G; Dissing, C; Søtofte, Inger;

    2005-01-01

    A new first-generation catalyst system for nucleophilic catalysis has been developed. It is based on a planar chiral ferrocene skeleton with either the potent nucleophile 4-(dimethylamino)pyridine (DMAP) or the related 4-nitropyridine N-oxide attached in either the 2- or the 3-position. The synth...

  19. L-Proline Derived Bifunctional Organocatalysts: Enantioselective Michael Addition of Dithiomalonates to trans-β-Nitroolefins.

    Science.gov (United States)

    Jin, Hui; Kim, Seung Tae; Hwang, Geum-Sook; Ryu, Do Hyun

    2016-04-15

    A series of novel L-proline derived tertiary amine bifunctional organocatalysts 9 are reported, which were applied to the asymmetric Michael addition of dithiomalonates 2 to trans-β-nitroolefins 1. The reaction proceeded in high yields (up to 99%) with high enantioselectivities (up to 97% ee). The synthetic utility of this methodology was demonstrated in the short synthesis of (R)-phenibut in high yield. PMID:26989804

  20. Catalysis of Photochemical Reactions.

    Science.gov (United States)

    Albini, A.

    1986-01-01

    Offers a classification system of catalytic effects in photochemical reactions, contrasting characteristic properties of photochemical and thermal reactions. Discusses catalysis and sensitization, examples of catalyzed reactions of excepted states, complexing ground state substrates, and catalysis of primary photoproducts. (JM)

  1. Advances in catalysis

    CERN Document Server

    Jentoft, Friederike C

    2014-01-01

    Advances in Catalysis fills the gap between the journal papers and the textbooks across the diverse areas of catalysis research. For more than 60 years Advances in Catalysis has been dedicated to recording progress in the field of catalysis and providing the scientific community with comprehensive and authoritative reviews. This series is invaluable to chemical engineers and chemists working in the field of catalysis in academia or industry. Authoritative reviews written by experts in the field. Topics selected to reflect progress of the field. Insightful and critical articles, fully edite

  2. Advances in catalysis

    CERN Document Server

    Gates, Bruce C

    2012-01-01

    Advances in Catalysis fills the gap between the journal papers and the textbooks across the diverse areas of catalysis research. For more than 60 years Advances in Catalysis has been dedicated to recording progress in the field of catalysis and providing the scientific community with comprehensive and authoritative reviews. This series in invaluable to chemical engineers, physical chemists, biochemists, researchers and industrial chemists working in the fields of catalysis and materials chemistry. * In-depth, critical, state-of-the-art reviews * Comprehensive, covers of all as

  3. Cooperative photoredox catalysis.

    Science.gov (United States)

    Lang, Xianjun; Zhao, Jincai; Chen, Xiaodong

    2016-05-31

    Visible-light photoredox catalysis has been experiencing a renaissance in response to topical interest in renewable energy and green chemistry. The latest progress in this area indicates that cooperation between photoredox catalysis and other domains of catalysis could provide effective results. Thus, we advance the concept of cooperative photoredox catalysis for organic transformations. It is important to note that this concept can bridge the gap between visible-light photoredox catalysis and other types of redox catalysis such as transition-metal catalysis, biocatalysis or electrocatalysis. In doing so, one can take advantage of the best of both worlds in establishing organic synthesis with visible-light-induced redox reaction as a crucial step. PMID:27094803

  4. The bi-functional organization of human basement membranes.

    Science.gov (United States)

    Halfter, Willi; Monnier, Christophe; Müller, David; Oertle, Philipp; Uechi, Guy; Balasubramani, Manimalha; Safi, Farhad; Lim, Roderick; Loparic, Marko; Henrich, Paul Bernhard

    2013-01-01

    The current basement membrane (BM) model proposes a single-layered extracellular matrix (ECM) sheet that is predominantly composed of laminins, collagen IVs and proteoglycans. The present data show that BM proteins and their domains are asymmetrically organized providing human BMs with side-specific properties: A) isolated human BMs roll up in a side-specific pattern, with the epithelial side facing outward and the stromal side inward. The rolling is independent of the curvature of the tissue from which the BMs were isolated. B) The epithelial side of BMs is twice as stiff as the stromal side, and C) epithelial cells adhere to the epithelial side of BMs only. Side-selective cell adhesion was also confirmed for BMs from mice and from chick embryos. We propose that the bi-functional organization of BMs is an inherent property of BMs and helps build the basic tissue architecture of metazoans with alternating epithelial and connective tissue layers.

  5. The bi-functional organization of human basement membranes.

    Directory of Open Access Journals (Sweden)

    Willi Halfter

    Full Text Available The current basement membrane (BM model proposes a single-layered extracellular matrix (ECM sheet that is predominantly composed of laminins, collagen IVs and proteoglycans. The present data show that BM proteins and their domains are asymmetrically organized providing human BMs with side-specific properties: A isolated human BMs roll up in a side-specific pattern, with the epithelial side facing outward and the stromal side inward. The rolling is independent of the curvature of the tissue from which the BMs were isolated. B The epithelial side of BMs is twice as stiff as the stromal side, and C epithelial cells adhere to the epithelial side of BMs only. Side-selective cell adhesion was also confirmed for BMs from mice and from chick embryos. We propose that the bi-functional organization of BMs is an inherent property of BMs and helps build the basic tissue architecture of metazoans with alternating epithelial and connective tissue layers.

  6. Kinetics and Catalysis Demonstrations.

    Science.gov (United States)

    Falconer, John L.; Britten, Jerald A.

    1984-01-01

    Eleven videotaped kinetics and catalysis demonstrations are described. Demonstrations include the clock reaction, oscillating reaction, hydrogen oxidation in air, hydrogen-oxygen explosion, acid-base properties of solids, high- and low-temperature zeolite reactivity, copper catalysis of ammonia oxidation and sodium peroxide decomposition, ammonia…

  7. Molecular water oxidation catalysis

    CERN Document Server

    Llobet, Antoni

    2014-01-01

    Photocatalytic water splitting is a promising strategy for capturing energy from the sun by coupling light harvesting and the oxidation of water, in order to create clean hydrogen fuel. Thus a deep knowledge of the water oxidation catalysis field is essential to be able to come up with useful energy conversion devices based on sunlight and water splitting. Molecular Water Oxidation Catalysis: A Key Topic for New Sustainable Energy Conversion Schemes presents a comprehensive and state-of-the-art overview of water oxidation catalysis in homogeneous phase, describing in detail the most importan

  8. Surface and nanomolecular catalysis

    CERN Document Server

    Richards, Ryan

    2006-01-01

    Using new instrumentation and experimental techniques that allow scientists to observe chemical reactions and molecular properties at the nanoscale, the authors of Surface and Nanomolecular Catalysis reveal new insights into the surface chemistry of catalysts and the reaction mechanisms that actually occur at a molecular level during catalysis. While each chapter contains the necessary background and explanations to stand alone, the diverse collection of chapters shows how developments from various fields each contributed to our current understanding of nanomolecular catalysis as a whole. The

  9. Research on Catalysis.

    Science.gov (United States)

    Bartholomew, Calvin H.; Hecker, William C.

    1984-01-01

    The objectives and philosophy of the Catalysis Laboratory at Brigham Young University are discussed. Also discusses recent and current research activities at the laboratory as well as educational opportunities, research facilities, and sources of research support. (JN)

  10. Organocatalytic One-Pot Asymmetric Synthesis of Thiolated Spiro-γ-lactam Oxindoles Bearing Three Stereocenters.

    Science.gov (United States)

    Huang, Xin; Liu, Miao; Pham, Kenny; Zhang, Xiaofeng; Yi, Wen-Bin; Jasinski, Jerry P; Zhang, Wei

    2016-07-01

    The first asymmetric synthesis of spiro-γ-lactam oxindoles bearing three stereocenters is reported. One-pot thiol-Michael/Mannich/lactamization reactions promoted by a recyclable fluorous bifunctional cinchona alkaloid/thiourea organocatalyst afford products in moderate to good yields with up to 95% ee and 6:1 dr. PMID:27258150

  11. Chiral Brønsted Acids for Asymmetric Organocatalysis

    Science.gov (United States)

    Kampen, Daniela; Reisinger, Corinna M.; List, Benjamin

    Chiral Brønsted acid catalysis is an emerging area of organocatalysis. Since the pioneering studies of the groups of Akiyama and Terada in 2004 on the use of chiral BINOL phosphates as powerful Brønsted acid catalysts in asymmetric Mannich-type reactions, numerous catalytic asymmetric transformations involving imine activation have been realized by means of this catalyst class, including among others Friedel-Crafts, Pictet-Spengler, Strecker, cycloaddition reactions, transfer hydrogenations, and reductive aminations. More recently, chiral BINOL phosphates found application in multicomponent and cascade reactions as for example in an asymmetric version of the Biginelli reaction. With the introduction of chiral BINOL-derived N-triflyl phosphoramides in 2006, asymmetric Brønsted acid catalysis is no longer restricted to reactive substrates. Also certain carbonyl compounds can be activated through these stronger Brønsted acid catalysts. In dealing with sensitive substrate classes, chiral dicarboxylic acids proved of particular value.

  12. Catalytic Methods in Asymmetric Synthesis Advanced Materials, Techniques, and Applications

    CERN Document Server

    Gruttadauria, Michelangelo

    2011-01-01

    This book covers advances in the methods of catalytic asymmetric synthesis and their applications. Coverage moves from new materials and technologies to homogeneous metal-free catalysts and homogeneous metal catalysts. The applications of several methodologies for the synthesis of biologically active molecules are discussed. Part I addresses recent advances in new materials and technologies such as supported catalysts, supports, self-supported catalysts, chiral ionic liquids, supercritical fluids, flow reactors and microwaves related to asymmetric catalysis. Part II covers advances and milesto

  13. Homogeneous, Heterogeneous, and Enzymatic Catalysis.

    Science.gov (United States)

    Oyama, S. Ted; Somorjai, Gabor A.

    1988-01-01

    Discusses three areas of catalysis: homegeneous, heterogeneous, and enzymatic. Explains fundamentals and economic impact of catalysis. Lists and discusses common industrial catalysts. Provides a list of 107 references. (MVL)

  14. Catalysis for alternative energy generation

    CERN Document Server

    2012-01-01

    Summarizes recent problems in using catalysts in alternative energy generation and proposes novel solutions  Reconsiders the role of catalysis in alternative energy generation  Contributors include catalysis and alternative energy experts from across the globe

  15. Isotopes in heterogeneous catalysis

    CERN Document Server

    Hargreaves, Justin SJ

    2006-01-01

    The purpose of this book is to review the current, state-of-the-art application of isotopic methods to the field of heterogeneous catalysis. Isotopic studies are arguably the ultimate technique in in situ methods for heterogeneous catalysis. In this review volume, chapters have been contributed by experts in the field and the coverage includes both the application of specific isotopes - Deuterium, Tritium, Carbon-14, Sulfur-35 and Oxygen-18 - as well as isotopic techniques - determination of surface mobility, steady state transient isotope kinetic analysis, and positron emission profiling.

  16. Pollution Control by Catalysis

    DEFF Research Database (Denmark)

    Eriksen, Kim Michael; Fehrmann, Rasmus

    1998-01-01

    The report summarises the results of two years of collaboration supported by INTAS between Department of Chemistry,DTU,DK , IUSTI,Universite de Provence,FR, ICE/HT University 6of Patras,GR, and Boreskov Institute of Catalysis,RU.The project has been concerned with mechanistic studies of de...

  17. Preface: Catalysis Today

    DEFF Research Database (Denmark)

    Li, Yongdan

    2016-01-01

    This special issue of Catalysis Today with the theme “Sustain-able Energy” results from a great success of the session “Catalytic Technologies Accelerating the Establishment of Sustainable and Clean Energy”, one of the two sessions of the 1st International Symposium on Catalytic Science and Techn...

  18. Crystallization and preliminary X-ray analysis of a bifunctional catalase-phenol oxidase from Scytalidium thermophilum

    International Nuclear Information System (INIS)

    The bifunctional enzyme catalase-phenol oxidase from S. thermophilum was crystallized by the hanging-drop vapour-diffusion method in space group P21 and diffraction data were collected to 2.8 Å resolution. Catalase-phenol oxidase from Scytalidium thermophilum is a bifunctional enzyme: its major activity is the catalase-mediated decomposition of hydrogen peroxide, but it also catalyzes phenol oxidation. To understand the structural basis of this dual functionality, the enzyme, which has been shown to be a tetramer in solution, has been purified by anion-exchange and gel-filtration chromatography and has been crystallized using the hanging-drop vapour-diffusion technique. Streak-seeding was used to obtain larger crystals suitable for X-ray analysis. Diffraction data were collected to 2.8 Å resolution at the Daresbury Synchrotron Radiation Source. The crystals belonged to space group P21 and contained one tetramer per asymmetric unit

  19. Purification, crystallization and preliminary X-ray crystallographic analysis of rice bifunctional α-amylase/subtilisin inhibitor from Oryza sativa

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yi-Hung [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Peng, Wen-Yan [Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Huang, Yen-Chieh [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Guan, Hong-Hsiang; Hsieh, Ying-Cheng [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Institute of Bioinformatics and Structural Biology, National Tsing-Hua University, Hsinchu 30013,Taiwan (China); Liu, Ming-Yih [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Chang, Tschining [Department of Hospitality Management, Nan Jeon Institute of Technology, Yen-Shui, Tainan 73746,Taiwan (China); Chen, Chun-Jung, E-mail: cjchen@nsrrc.org.tw [Life Science Group, Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076,Taiwan (China); Department of Physics, National Tsing-Hua University, Hsinchu 30013,Taiwan (China)

    2006-08-01

    The crystallization of rice α-amylase/subtilisin bifunctional inhibitor is reported. Rice bifunctional α-amylase/subtilisin inhibitor (RASI) can inhibit both α-amylase from larvae of the red flour beetle (Tribolium castaneum) and subtilisin from Bacillus subtilis. The synthesis of RASI is up-regulated during the late milky stage in developing seeds. The 8.9 kDa molecular-weight RASI from rice has been crystallized using the hanging-drop vapour-diffusion method. According to 1.81 Å resolution X-ray diffraction data from rice RASI crystals, the crystal belongs to space group P2{sub 1}2{sub 1}2, with unit-cell parameters a = 79.99, b = 62.95, c = 66.70 Å. Preliminary analysis indicates two RASI molecules in an asymmetric unit with a solvent content of 44%.

  20. Purification, crystallization and preliminary X-ray crystallographic analysis of rice bifunctional α-amylase/subtilisin inhibitor from Oryza sativa

    International Nuclear Information System (INIS)

    The crystallization of rice α-amylase/subtilisin bifunctional inhibitor is reported. Rice bifunctional α-amylase/subtilisin inhibitor (RASI) can inhibit both α-amylase from larvae of the red flour beetle (Tribolium castaneum) and subtilisin from Bacillus subtilis. The synthesis of RASI is up-regulated during the late milky stage in developing seeds. The 8.9 kDa molecular-weight RASI from rice has been crystallized using the hanging-drop vapour-diffusion method. According to 1.81 Å resolution X-ray diffraction data from rice RASI crystals, the crystal belongs to space group P21212, with unit-cell parameters a = 79.99, b = 62.95, c = 66.70 Å. Preliminary analysis indicates two RASI molecules in an asymmetric unit with a solvent content of 44%

  1. Anion-π catalysis.

    Science.gov (United States)

    Zhao, Yingjie; Beuchat, César; Domoto, Yuya; Gajewy, Jadwiga; Wilson, Adam; Mareda, Jiri; Sakai, Naomi; Matile, Stefan

    2014-02-01

    The introduction of new noncovalent interactions to build functional systems is of fundamental importance. We here report experimental and theoretical evidence that anion-π interactions can contribute to catalysis. The Kemp elimination is used as a classical tool to discover conceptually innovative catalysts for reactions with anionic transition states. For anion-π catalysis, a carboxylate base and a solubilizer are covalently attached to the π-acidic surface of naphthalenediimides. On these π-acidic surfaces, transition-state stabilizations up to ΔΔGTS = 31.8 ± 0.4 kJ mol(-1) are found. This value corresponds to a transition-state recognition of KTS = 2.7 ± 0.5 μM and a catalytic proficiency of 3.8 × 10(5) M(-1). Significantly increasing transition-state stabilization with increasing π-acidity of the catalyst, observed for two separate series, demonstrates the existence of "anion-π catalysis." In sharp contrast, increasing π-acidity of the best naphthalenediimide catalysts does not influence the more than 12 000-times weaker substrate recognition (KM = 34.5 ± 1.6 μM). Together with the disappearance of Michaelis-Menten kinetics on the expanded π-surfaces of perylenediimides, this finding supports that contributions from π-π interactions are not very important for anion-π catalysis. The linker between the π-acidic surface and the carboxylate base strongly influences activity. Insufficient length and flexibility cause incompatibility with saturation kinetics. Moreover, preorganizing linkers do not improve catalysis much, suggesting that the ideal positioning of the carboxylate base on the π-acidic surface is achieved by intramolecular anion-π interactions rather than by an optimized structure of the linker. Computational simulations are in excellent agreement with experimental results. They confirm, inter alia, that the stabilization of the anionic transition states (but not the neutral ground states) increases with the π-acidity of the

  2. Catalysis of Supramolecular Hydrogelation.

    Science.gov (United States)

    Trausel, Fanny; Versluis, Frank; Maity, Chandan; Poolman, Jos M; Lovrak, Matija; van Esch, Jan H; Eelkema, Rienk

    2016-07-19

    One often thinks of catalysts as chemical tools to accelerate a reaction or to have a reaction run under more benign conditions. As such, catalysis has a role to play in the chemical industry and in lab scale synthesis that is not to be underestimated. Still, the role of catalysis in living systems (cells, organisms) is much more extensive, ranging from the formation and breakdown of small molecules and biopolymers to controlling signal transduction cascades and feedback processes, motility, and mechanical action. Such phenomena are only recently starting to receive attention in synthetic materials and chemical systems. "Smart" soft materials could find many important applications ranging from personalized therapeutics to soft robotics to name but a few. Until recently, approaches to control the properties of such materials were largely dominated by thermodynamics, for instance, looking at phase behavior and interaction strength. However, kinetics plays a large role in determining the behavior of such soft materials, for instance, in the formation of kinetically trapped (metastable) states or the dynamics of component exchange. As catalysts can change the rate of a chemical reaction, catalysis could be used to control the formation, dynamics, and fate of supramolecular structures when the molecules making up these structures contain chemical bonds whose formation or exchange are susceptible to catalysis. In this Account, we describe our efforts to use synthetic catalysts to control the properties of supramolecular hydrogels. Building on the concept of synthesizing the assembling molecule in the self-assembly medium from nonassembling precursors, we will introduce the use of catalysis to change the kinetics of assembler formation and thereby the properties of the resulting material. In particular, we will focus on the synthesis of supramolecular hydrogels where the use of a catalyst provides access to gel materials with vastly different appearance and mechanical

  3. Anion-π catalysis.

    Science.gov (United States)

    Zhao, Yingjie; Beuchat, César; Domoto, Yuya; Gajewy, Jadwiga; Wilson, Adam; Mareda, Jiri; Sakai, Naomi; Matile, Stefan

    2014-02-01

    The introduction of new noncovalent interactions to build functional systems is of fundamental importance. We here report experimental and theoretical evidence that anion-π interactions can contribute to catalysis. The Kemp elimination is used as a classical tool to discover conceptually innovative catalysts for reactions with anionic transition states. For anion-π catalysis, a carboxylate base and a solubilizer are covalently attached to the π-acidic surface of naphthalenediimides. On these π-acidic surfaces, transition-state stabilizations up to ΔΔGTS = 31.8 ± 0.4 kJ mol(-1) are found. This value corresponds to a transition-state recognition of KTS = 2.7 ± 0.5 μM and a catalytic proficiency of 3.8 × 10(5) M(-1). Significantly increasing transition-state stabilization with increasing π-acidity of the catalyst, observed for two separate series, demonstrates the existence of "anion-π catalysis." In sharp contrast, increasing π-acidity of the best naphthalenediimide catalysts does not influence the more than 12 000-times weaker substrate recognition (KM = 34.5 ± 1.6 μM). Together with the disappearance of Michaelis-Menten kinetics on the expanded π-surfaces of perylenediimides, this finding supports that contributions from π-π interactions are not very important for anion-π catalysis. The linker between the π-acidic surface and the carboxylate base strongly influences activity. Insufficient length and flexibility cause incompatibility with saturation kinetics. Moreover, preorganizing linkers do not improve catalysis much, suggesting that the ideal positioning of the carboxylate base on the π-acidic surface is achieved by intramolecular anion-π interactions rather than by an optimized structure of the linker. Computational simulations are in excellent agreement with experimental results. They confirm, inter alia, that the stabilization of the anionic transition states (but not the neutral ground states) increases with the π-acidity of the

  4. Asymmetric collider

    International Nuclear Information System (INIS)

    The study of CP violation in beauty decay is one of the key challenges facing high energy physics. Much work has not yielded a definitive answer how this study might best be performed. However, one clear conclusion is that new accelerator facilities are needed. Proposals include experiments at asymmetric electron-positron colliders and in fixed-target and collider modes at LHC and SSC. Fixed-target and collider experiments at existing accelerators, while they might succeed in a first observation of the effect, will not be adequate to study it thoroughly. Giomataris has emphasized the potential of a new approach to the study of beauty CP violation: the asymmetric proton collider. Such a collider might be realized by the construction of a small storage ring intersecting an existing or soon-to-exist large synchrotron, or by arranging collisions between a large synchrotron and its injector. An experiment at such a collider can combine the advantages of fixed-target-like spectrometer geometry, facilitating triggering, particle identification and the instrumentation of a large acceptance, while the increased √s can provide a factor > 100 increase in beauty-production cross section compared to Tevatron or HERA fixed-target. Beams crossing at a non-zero angle can provide a small interaction region, permitting a first-level decay-vertex trigger to be implemented. To achieve large √s with a large Lorentz boost and high luminosity, the most favorable venue is the high-energy booster (HEB) at the SSC Laboratory, though the CERN SPS and Fermilab Tevatron are also worth considering

  5. Phase-transfer-catalysed asymmetric synthesis of tetrasubstituted allenes

    Science.gov (United States)

    Hashimoto, Takuya; Sakata, Kazuki; Tamakuni, Fumiko; Dutton, Mark J.; Maruoka, Keiji

    2013-03-01

    Allenes are molecules based on three carbons connected by two cumulated carbon-carbon double bonds. Given their axially chiral nature and unique reactivity, substituted allenes have a variety of applications in organic chemistry as key synthetic intermediates and directly as part of biologically active compounds. Although the demands for these motivated many endeavours to make axially chiral, substituted allenes by exercising asymmetric catalysis, the catalytic asymmetric synthesis of fully substituted ones (tetrasubstituted allenes) remained largely an unsolved issue. The fundamental obstacle to solving this conundrum is the lack of a simple synthetic transformation that provides tetrasubstituted allenes in the action of catalysis. We report herein a strategy to overcome this issue by the use of a phase-transfer-catalysed asymmetric functionalization of 1-alkylallene-1,3-dicarboxylates with N-arylsulfonyl imines and benzylic and allylic bromides.

  6. Enantioselective Synthesis of Isoquinolines: Merging Chiral-Phosphine and Gold Catalysis.

    Science.gov (United States)

    Gao, Yu-Ning; Shi, Feng-Chen; Xu, Qin; Shi, Min

    2016-05-10

    The highly enantioselective synthesis of dihydroisoquinoline derivatives from aromatic sulfonated imines tethered with an alkyne moiety, through a one-pot asymmetric relay catalysis of chiral-phosphine and gold catalysts, is reported. Enantiomerically enriched dihydroisoquinoline derivatives were afforded in good yields and good-to-excellent ee values under mild conditions, based on the asymmetric aza-Morita-Baylis-Hillman reaction. Dihydroisoquinoline derivatives containing two chiral centers were also synthesized through further transformations. PMID:26990120

  7. Approaches to asymmetric catalysis with polymer-supported pyrrolidines

    OpenAIRE

    Alza Barrios, Esther

    2011-01-01

    The present research project developed is focused in the immobilization of catalytic systems allowing the formation of carbon-carbon and carbonheteroatom bonds through enantioselective procedures with improved sustainability characteristics (suppression of catalyst separation steps, preferential use of water as a solvent under aerobic conditions, avoidance of protecting groups and, hence, of protection and deprotection steps). In particular, the study is directed towards the...

  8. Applied heterogeneous catalysis

    International Nuclear Information System (INIS)

    This reference book explains the scientific principles of heterogeneous catalysis while also providing details on the methods used to develop commercially viable catalyst products. A section of the book presents reactor design engineering theory and practices for the profitable application of these catalysts in large-scale industrial processes. A description of the mechanisms and commercial applications of catalysis is followed by a review of catalytic reaction kinetics. There are five chapters on selecting catalyst agents, developing and preparing industrial catalysts, measuring catalyst properties, and analyzing the physico-chemical characteristics of solid catalyst particles. The final chapter reviews the elements of catalytic reactor design, with emphasis on flow regimes vs. reactor types, heat and mass transfer in reactor beds, single- and multi-phase flows, and the effects of thermodynamics and other catalyst properties on the process flow scheme

  9. Magnetic Catalysis in Graphene

    CERN Document Server

    Winterowd, Christopher; Zafeiropoulos, Savvas

    2015-01-01

    One of the most important developments in condensed matter physics in recent years has been the discovery and characterization of graphene. A two-dimensional layer of Carbon arranged in a hexagonal lattice, graphene exhibits many interesting electronic properties, most notably that the low energy excitations behave as massless Dirac fermions. These excitations interact strongly via the Coulomb interaction and thus non-perturbative methods are necessary. Using methods borrowed from lattice QCD, we study the graphene effective theory in the presence of an external magnetic field. Graphene, along with other $(2+1)$-dimensional field theories, has been predicted to undergo spontaneous breaking of flavor symmetry including the formation of a gap as a result of the external magnetic field. This phenomenon is known as magnetic catalysis. Our study investigates magnetic catalysis using a fully non-perturbative approach.

  10. Solid Base Catalysis

    CERN Document Server

    Ono, Yoshio

    2011-01-01

    The importance of solid base catalysts has come to be recognized for their environmentally benign qualities, and much significant progress has been made over the past two decades in catalytic materials and solid base-catalyzed reactions. The book is focused on the solid base. Because of the advantages over liquid bases, the use of solid base catalysts in organic synthesis is expanding. Solid bases are easier to dispose than liquid bases, separation and recovery of products, catalysts and solvents are less difficult, and they are non-corrosive. Furthermore, base-catalyzed reactions can be performed without using solvents and even in the gas phase, opening up more possibilities for discovering novel reaction systems. Using numerous examples, the present volume describes the remarkable role solid base catalysis can play, given the ever increasing worldwide importance of "green" chemistry. The reader will obtain an overall view of solid base catalysis and gain insight into the versatility of the reactions to whic...

  11. Catalysis of carboxypeptidase A

    DEFF Research Database (Denmark)

    Wu, Shanshan; Zhang, Chunchun; Xu, Dingguo;

    2010-01-01

    The catalytic mechanism of carboxypeptidase A (CPA) for the hydrolysis of ester substrates is investigated using hybrid quantum mechanical/molecular mechanical (QM/MM) methods and high-level density functional theory. The prevailing mechanism was found to utilize an active-site water molecule ass...... here and in our earlier publication, a unified model is proposed to account for nearly all experimental observations concerning the catalysis of CPA....

  12. Heterogeneous radiation catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Cabicar, J.; Kudlacek, R.; Motl, A.; Mucka, V.; Pospisil, M. (Ceske Vysoke Uceni Technicke, Prague (Czechoslovakia). Fakulta Jaderna a Fysikalne Inzenyrska)

    1982-01-01

    Results of the investigation of some radiation catalysis problems are reviewed. Main attention is paid to the radiation effect on the catalytic activity of various catalysts in the decomposition of hydrogen peroxide and in the hydrogenation of maleic acid. The results presented are obtained in the study of the kinetics of reduction of several pre-irradiated metal oxides and of the radiation effect on catalysts used in some catalytic reactions important for industry.

  13. Astaxanthin diferulate as a bifunctional antioxidant

    DEFF Research Database (Denmark)

    Papa, T.B.R.; Pinho, V.D.; Nascimento, E.P. do;

    2015-01-01

    Abstract Astaxanthin when esterified with ferulic acid is better singlet oxygen quencher with k2 = (1.58 ± 0.1) 10(10) L mol(- 1)s(- 1) in ethanol at 25°C compared with astaxanthin with k2 = (1.12 ± 0.01) 10(9) L mol(- 1)s(- 1). The ferulate moiety in the astaxanthin diester is a better radical s....... The mutual enhancement of antioxidant activity for the newly synthetized astaxanthin diferulate becoming a bifunctional antioxidant is rationalized according to a two-dimensional classification plot for electron donation and electron acceptance capability....

  14. Inorganic Reaction Mechanisms Part II: Homogeneous Catalysis

    Science.gov (United States)

    Cooke, D. O.

    1976-01-01

    Suggests several mechanisms for catalysis by metal ion complexes. Discusses the principal factors of importance in these catalysis reactions and suggests reactions suitable for laboratory study. (MLH)

  15. Bifunctional electrocatalyst for oxygen/air electrodes

    International Nuclear Information System (INIS)

    Highlights: • Nano-Silver powder was prepared by chemical method. • Ag catalyst was characterized by SEM and XRD studies. • Ag was investigated as bi-functional electrocatalyst for oxygen/air electrodes. • Ag shows good electrochemical activity towards OER and ORR reactions. - Abstract: Nano-Silver powder has been studied as bi-functional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline medium. Ag nano-powder has been prepared by a simple wet chemical method with Silver nitrate as precursor and Glucose as reducing agent. X-ray Diffraction and Scanning Electron Microscopy studies were carried out to characterize the Silver catalyst. Electrochemical oxygen evolution characterization shows anodic peak typically at the range between 0.350 and 0.514 V Vs Hg/HgO corresponding to Silver oxidation followed by the onset of oxygen evolution at 0.706 V. Oxygen reduction reaction studies carried out using Rotating Disc Electrode (RDE) confirm the four electron reaction mechanism. Ag catalyst shows promising characteristics for oxygen evolution and oxygen reduction

  16. Catalysis and prebiotic RNA synthesis

    Science.gov (United States)

    Ferris, James P.

    1993-01-01

    The essential role of catalysis for the origins of life is discussed. The status of the prebiotic synthesis of 2',5'- and 3'5'-linked oligomers of RNA is reviewed. Examples of the role of metal ion and mineral catalysis in RNA oligomer formation are discussed.

  17. Engineering Chiral Catalysts through Asymmetric Activation and Super High Throughput Screening (SHTS)

    Institute of Scientific and Technical Information of China (English)

    MIKAMI,Koichi; KORENAGA,Toshinobu; MATSUKAWA,Satoru; DING,Kui-Ling; LONG,Jiang

    2001-01-01

    A conceptually new strategy for asymmetric catalysis, namely asymmetric activation, in which a chiral activator selectively activates one enantiomer of a racemic chiral catalyst, and a highly efficient screening system for finding the most effective catalysts, namely super high throughput screening (SHTS), by which the reaction can be conducted in parallel and the ee% of the product is allowed to determine within minutes, are summarized in the present account. It is reasonable to be lieve that SHTS technique combined with asymmetric activa tion or deactivation principle will provide a very powerful methodology for finding the new catalysts and the best catalyst tuning for asymmetric reactions.

  18. Asymmetric Roadmap to Diverse Polycyclic Benzopyrans via Phosphine-Catalyzed Enantioselective [4 + 2]-Annulation Reaction.

    Science.gov (United States)

    Danda, Adithi; Kesava-Reddy, Naredla; Golz, Christopher; Strohmann, Carsten; Kumar, Kamal

    2016-06-01

    The catalytic addition of the amino acid derived bifunctional N-acylaminophosphine to an α-substituted allene ester generated a zwitterionic dipole that engaged the vinylogous ester function of 3-cyano-chromones in a [4 + 2] annulation reaction to deliver tetrahydroxanthones embodying three consecutive chiral centers in high yields and with excellent enantioselectivities. The established asymmetric synthesis further paves the way to two different classes of complex, sp(3)-rich tetracyclic benzopyrans via efficient cascade reactions. PMID:27187586

  19. Heterogeneous Catalysis of Polyoxometalate Based Organic–Inorganic Hybrids

    Directory of Open Access Journals (Sweden)

    Yuanhang Ren

    2015-03-01

    Full Text Available Organic–inorganic hybrid polyoxometalate (POM compounds are a subset of materials with unique structures and physical/chemical properties. The combination of metal-organic coordination complexes with classical POMs not only provides a powerful way to gain multifarious new compounds but also affords a new method to modify and functionalize POMs. In parallel with the many reports on the synthesis and structure of new hybrid POM compounds, the application of these compounds for heterogeneous catalysis has also attracted considerable attention. The hybrid POM compounds show noteworthy catalytic performance in acid, oxidation, and even in asymmetric catalytic reactions. This review summarizes the design and synthesis of organic–inorganic hybrid POM compounds and particularly highlights their recent progress in heterogeneous catalysis.

  20. Asymmetric Ashes

    Science.gov (United States)

    2006-11-01

    that oscillate in certain directions. Reflection or scattering of light favours certain orientations of the electric and magnetic fields over others. This is why polarising sunglasses can filter out the glint of sunlight reflected off a pond. When light scatters through the expanding debris of a supernova, it retains information about the orientation of the scattering layers. If the supernova is spherically symmetric, all orientations will be present equally and will average out, so there will be no net polarisation. If, however, the gas shell is not round, a slight net polarisation will be imprinted on the light. This is what broad-band polarimetry can accomplish. If additional spectral information is available ('spectro-polarimetry'), one can determine whether the asymmetry is in the continuum light or in some spectral lines. In the case of the Type Ia supernovae, the astronomers found that the continuum polarisation is very small so that the overall shape of the explosion is crudely spherical. But the much larger polarization in strongly blue-shifted spectral lines evidences the presence, in the outer regions, of fast moving clumps with peculiar chemical composition. "Our study reveals that explosions of Type Ia supernovae are really three-dimensional phenomena," says Dietrich Baade. "The outer regions of the blast cloud is asymmetric, with different materials found in 'clumps', while the inner regions are smooth." "This study was possible because polarimetry could unfold its full strength thanks to the light-collecting power of the Very Large Telescope and the very precise calibration of the FORS instrument," he adds. The research team first spotted this asymmetry in 2003, as part of the same observational campaign (ESO PR 23/03 and ESO PR Photo 26/05). The new, more extensive results show that the degree of polarisation and, hence, the asphericity, correlates with the intrinsic brightness of the explosion. The brighter the supernova, the smoother, or less clumpy

  1. Spin-modified catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Choudhary, R. [Department of Physics and Astronomy and NCMN, University of Nebraska, Lincoln, Nebraska 68588 (United States); School of Basic Sciences, Indian Institute of Technology Mandi, Mandi 175001, Himachal Pradesh (India); Manchanda, P.; Enders, A.; Balamurugan, B.; Sellmyer, D. J.; Skomski, R., E-mail: rskomski@unl.edu [Department of Physics and Astronomy and NCMN, University of Nebraska, Lincoln, Nebraska 68588 (United States); Kashyap, A. [School of Basic Sciences, Indian Institute of Technology Mandi, Mandi 175001, Himachal Pradesh (India); Sykes, E. C. H. [Department of Chemistry, Pearson Chemistry Laboratory, Tufts University, Medford, Massachusetts 02155 (United States)

    2015-05-07

    First-principle calculations are used to explore the use of magnetic degrees of freedom in catalysis. We use the Vienna Ab-Initio Simulation Package to investigate both L1{sub 0}-ordered FePt and CoPt bulk materials and perform supercell calculations for FePt nanoclusters containing 43 atoms. As the catalytic activity of transition-metal elements and alloys involves individual d levels, magnetic alloying strongly affects the catalytic performance, because it leads to shifts in the local densities of states and to additional peaks due to magnetic-moment formation. The peak shift persists in nanoparticles but is surface-site specific and therefore depends on cluster size. Our research indicates that small modifications in stoichiometry and cluster size are a useful tool in the search for new catalysts.

  2. Spin-modified catalysis

    International Nuclear Information System (INIS)

    First-principle calculations are used to explore the use of magnetic degrees of freedom in catalysis. We use the Vienna Ab-Initio Simulation Package to investigate both L10-ordered FePt and CoPt bulk materials and perform supercell calculations for FePt nanoclusters containing 43 atoms. As the catalytic activity of transition-metal elements and alloys involves individual d levels, magnetic alloying strongly affects the catalytic performance, because it leads to shifts in the local densities of states and to additional peaks due to magnetic-moment formation. The peak shift persists in nanoparticles but is surface-site specific and therefore depends on cluster size. Our research indicates that small modifications in stoichiometry and cluster size are a useful tool in the search for new catalysts

  3. Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons

    OpenAIRE

    Zecevic, Jovana; Vanbutsele, Gina; de Jong, Krijn P.; Martens, Johan

    2015-01-01

    The ability to precisely control nanoscale features is increasingly exploited to develop and improve monofunctional catalysts1–4. Striking effects might also be expected in the case of bifunctional catalysts, which play an important role in hydrocracking of fossil and renewable hydrocarbon sources to provide high-quality diesel fuel5–7. Such bifunctional hydrocracking catalysts contain metal sites and acid sites, and for more than 50 years the so-called ‘intimacy criterion’8 has dictated the ...

  4. Nanoparticle Superlattices as Efficient Bifunctional Electrocatalysts for Water Splitting.

    Science.gov (United States)

    Li, Jun; Wang, Yongcheng; Zhou, Tong; Zhang, Hui; Sun, Xuhui; Tang, Jing; Zhang, Lijuan; Al-Enizi, Abdullah M; Yang, Zhongqin; Zheng, Gengfeng

    2015-11-18

    The solar-driven water splitting process is highly attractive for alternative energy utilization, while developing efficient, earth-abundant, bifunctional catalysts for both oxygen evolution reaction and hydrogen evolution reaction has remained as a major challenge. Herein, we develop an ordered CoMnO@CN superlattice structure as an efficient bifunctional water-splitting electrocatalyst, in which uniform Co-Mn oxide (CoMnO) nanoparticles are coated with a thin, continuous nitrogen-doped carbon (CN) framework. The CoMnO nanoparticles enable optimized OER activity with effective electronic structure configuration, and the CN framework serves as an excellent HER catalyst. Importantly, the ordered superlattice structure is beneficial for enhanced reactive sites, efficient charge transfer, and structural stability. This bifunctional superlattice catalyst manifests optimized current densities and electrochemical stability in overall water splitting, outperforming most of the previously reported single- or bifunctional electrocatalysts. Combining with a silicon photovoltaic cell, this CoMnO@CN superlattice bifunctional catalyst enables unassisted solar water splitting continuously for ∼5 days with a solar-to-hydrogen conversion efficiency of ∼8.0%. Our discovery suggests that these transition metal oxide-based superlattices may serve as a unique structure modality for efficient bifunctional water splitting electrocatalysts with scale-up potentials. PMID:26496655

  5. Nanoparticle Superlattices as Efficient Bifunctional Electrocatalysts for Water Splitting.

    Science.gov (United States)

    Li, Jun; Wang, Yongcheng; Zhou, Tong; Zhang, Hui; Sun, Xuhui; Tang, Jing; Zhang, Lijuan; Al-Enizi, Abdullah M; Yang, Zhongqin; Zheng, Gengfeng

    2015-11-18

    The solar-driven water splitting process is highly attractive for alternative energy utilization, while developing efficient, earth-abundant, bifunctional catalysts for both oxygen evolution reaction and hydrogen evolution reaction has remained as a major challenge. Herein, we develop an ordered CoMnO@CN superlattice structure as an efficient bifunctional water-splitting electrocatalyst, in which uniform Co-Mn oxide (CoMnO) nanoparticles are coated with a thin, continuous nitrogen-doped carbon (CN) framework. The CoMnO nanoparticles enable optimized OER activity with effective electronic structure configuration, and the CN framework serves as an excellent HER catalyst. Importantly, the ordered superlattice structure is beneficial for enhanced reactive sites, efficient charge transfer, and structural stability. This bifunctional superlattice catalyst manifests optimized current densities and electrochemical stability in overall water splitting, outperforming most of the previously reported single- or bifunctional electrocatalysts. Combining with a silicon photovoltaic cell, this CoMnO@CN superlattice bifunctional catalyst enables unassisted solar water splitting continuously for ∼5 days with a solar-to-hydrogen conversion efficiency of ∼8.0%. Our discovery suggests that these transition metal oxide-based superlattices may serve as a unique structure modality for efficient bifunctional water splitting electrocatalysts with scale-up potentials.

  6. Synthesis of a bifunctional cytidine derivative and its conjugation to RNA for in vitro selection of a cytidine deaminase ribozyme

    Directory of Open Access Journals (Sweden)

    Nico Rublack

    2014-08-01

    Full Text Available Over the past 20 years, the generation of functional RNAs by in vitro selection has become a standard technique. Apart from aptamers for simple binding of defined ligands, also RNAs for catalysis of chemical reactions have been selected. In the latter case, a key step often is the conjugation of one of the two reactants to the library, requiring suitable strategies for terminal or internal RNA functionalization. With the aim of selecting a ribozyme for deamination of cytidine, we have set up a selection scheme involving the attachment of the cytidine acting as deamination substrate to the 3'-terminus of the RNAs in the library, and library immobilization. Here, we report the synthesis of a bifunctional cytidine derivative suitable for conjugation to RNA and linkage of the conjugated library to a streptavidine-coated surface. Successful conjugation of the cytidine derivative to the 3'-terminus of a model RNA is demonstrated.

  7. A Survey Course in Catalysis.

    Science.gov (United States)

    Skaates, J. M.

    1982-01-01

    Describes a 10-week survey course in catalysis for chemical engineering and chemistry students designed to show how modern chemistry and chemical engineering interact in the ongoing development of industrial catalysts. Includes course outline and instructional strategies. (Author/JN)

  8. Self-assembly of cobalt-centered metal organic framework and multiwalled carbon nanotubes hybrids as a highly active and corrosion-resistant bifunctional oxygen catalyst

    Science.gov (United States)

    Fang, Yiyun; Li, Xinzhe; Li, Feng; Lin, Xiaoqing; Tian, Min; Long, Xuefeng; An, Xingcai; Fu, Yan; Jin, Jun; Ma, Jiantai

    2016-09-01

    Metal organic frameworks (MOF) derived carbonaceous materials have emerged as promising bifunctional oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts for electrochemical energy conversion and storage. But previous attempts to overcome the poor electrical conductivity of MOFs hybrids involve a harsh high-template pyrolytic process to in situ form carbon, which suffer from extremely complex operation and inevitable carbon corrosion at high positive potentials when OER is operated. Herein, a self-assembly approach is presented to synthesize a non-precious metal-based, high active and strong durable Co-MOF@CNTs bifunctional catalyst for OER and ORR. CNTs not only improve the transportation of the electrons but also can sustain the harsh oxidative environment of OER without carbon corrosion. Meanwhile, the unique 3D hierarchical structure offers a large surface area and stable anchoring sites for active centers and CNTs, which enables the superior durability of hybrid. Moreover, a synergistic catalysis of Co(II), organic ligands and CNTs will enhance the bifunctional electrocatalytic performance. Impressively, the hybrid exhibits comparable OER and ORR catalytic activity to RuO2 and 20 wt% Pt/C catalysts and superior stability. This facile and versatile strategy to fabricating MOF-based hybrids may be extended to other electrode materials for fuel cell and water splitting applications.

  9. Editorial: Nanoscience makes catalysis greener

    KAUST Repository

    Polshettiwar, Vivek

    2012-01-09

    Green chemistry by nanocatalysis: Catalysis is a strategic field of science because it involves new ways of meeting energy and sustainability challenges. The concept of green chemistry, which makes the science of catalysis even more creative, has become an integral part of sustainability. This special issue is at the interface of green chemistry and nanocatalysis, and features excellent background articles as well as the latest research results. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Structural Studies of Geosmin Synthase, a Bifunctional Sesquiterpene Synthase with αα Domain Architecture That Catalyzes a Unique Cyclization-Fragmentation Reaction Sequence.

    Science.gov (United States)

    Harris, Golda G; Lombardi, Patrick M; Pemberton, Travis A; Matsui, Tsutomu; Weiss, Thomas M; Cole, Kathryn E; Köksal, Mustafa; Murphy, Frank V; Vedula, L Sangeetha; Chou, Wayne K W; Cane, David E; Christianson, David W

    2015-12-01

    Geosmin synthase from Streptomyces coelicolor (ScGS) catalyzes an unusual, metal-dependent terpenoid cyclization and fragmentation reaction sequence. Two distinct active sites are required for catalysis: the N-terminal domain catalyzes the ionization and cyclization of farnesyl diphosphate to form germacradienol and inorganic pyrophosphate (PPi), and the C-terminal domain catalyzes the protonation, cyclization, and fragmentation of germacradienol to form geosmin and acetone through a retro-Prins reaction. A unique αα domain architecture is predicted for ScGS based on amino acid sequence: each domain contains the metal-binding motifs typical of a class I terpenoid cyclase, and each domain requires Mg(2+) for catalysis. Here, we report the X-ray crystal structure of the unliganded N-terminal domain of ScGS and the structure of its complex with three Mg(2+) ions and alendronate. These structures highlight conformational changes required for active site closure and catalysis. Although neither full-length ScGS nor constructs of the C-terminal domain could be crystallized, homology models of the C-terminal domain were constructed on the basis of ∼36% sequence identity with the N-terminal domain. Small-angle X-ray scattering experiments yield low-resolution molecular envelopes into which the N-terminal domain crystal structure and the C-terminal domain homology model were fit, suggesting possible αα domain architectures as frameworks for bifunctional catalysis.

  11. Development of catalysts and ligands for enantioselective gold catalysis.

    Science.gov (United States)

    Wang, Yi-Ming; Lackner, Aaron D; Toste, F Dean

    2014-03-18

    During the past decade, the use of Au(I) complexes for the catalytic activation of C-C π-bonds has been investigated intensely. Over this time period, the development of homogeneous gold catalysis has been extraordinarily rapid and has yielded a host of mild and selective methods for the formation of carbon-carbon and carbon-heteroatom bonds. The facile formation of new bonds facilitated by gold naturally led to efforts toward rendering these transformations enantioselective. In this Account, we survey the development of catalysts and ligands for enantioselective gold catalysis by our research group as well as related work by others. We also discuss some of our strategies to address the challenges of enantioselective gold(I) catalysis. Early on, our work with enantioselective gold-catalyzed transformations focused on bis(phosphinegold) complexes derived from axially chiral scaffolds. Although these complexes were highly successful in some reactions like cyclopropanation, the careful choice of the weakly coordinating ligand (or counterion) was necessary to obtain high levels of enantioselectivity for the case of allene hydroamination. These counterion effects led us to use the anion itself as a source of chirality, which was successful in the case of allene hydroalkoxylation. In general, these tactics enhance the steric influence around the reactive gold center beyond the two-coordinate ligand environment. The use of binuclear complexes allowed us to use the second gold center and its associated ligand (or counterion) to exert a further steric influence. In a similar vein, we employed a chiral anion (in place of or in addition to a chiral ligand) to move the chiral information closer to the reactive center. In order to expand the scope of reactions amenable to enantioselective gold catalysis to cycloadditions and other carbocyclization processes, we also developed a new class of mononuclear phosphite and phosphoramidite ligands to supplement the previously widely

  12. Enhanced Micellar Catalysis LDRD.

    Energy Technology Data Exchange (ETDEWEB)

    Betty, Rita G.; Tucker, Mark D; Taggart, Gretchen; Kinnan, Mark K.; Glen, Crystal Chanea; Rivera, Danielle; Sanchez, Andres; Alam, Todd Michael

    2012-12-01

    The primary goals of the Enhanced Micellar Catalysis project were to gain an understanding of the micellar environment of DF-200, or similar liquid CBW surfactant-based decontaminants, as well as characterize the aerosolized DF-200 droplet distribution and droplet chemistry under baseline ITW rotary atomization conditions. Micellar characterization of limited surfactant solutions was performed externally through the collection and measurement of Small Angle X-Ray Scattering (SAXS) images and Cryo-Transmission Electron Microscopy (cryo-TEM) images. Micellar characterization was performed externally at the University of Minnesotas Characterization Facility Center, and at the Argonne National Laboratory Advanced Photon Source facility. A micellar diffusion study was conducted internally at Sandia to measure diffusion constants of surfactants over a concentration range, to estimate the effective micelle diameter, to determine the impact of individual components to the micellar environment in solution, and the impact of combined components to surfactant phase behavior. Aerosolized DF-200 sprays were characterized for particle size and distribution and limited chemical composition. Evaporation rates of aerosolized DF-200 sprays were estimated under a set of baseline ITW nozzle test system parameters.

  13. Synthesis of building blocks for the development of the SUPRAPhos ligand library and examples of their application in catalysis

    NARCIS (Netherlands)

    P.E. Goudriaan; X.-B. Jang; M. Kuil; R. Lemmens; P.W.N.M. van Leeuwen; J.N.H. Reek

    2008-01-01

    We have previously introduced the SUPRAPhos ligand library, which is based on components that are self-assembled through nitrogen-zinc interactions, and report here an extension of this library, which widens the scope for application in asymmetric homogeneous catalysis. For example, we report the sy

  14. The Combinatorial Approach to Asymmetric Hydrogenation : Phosphoramidite Libraries, Ruthenacycles, and Artificial Enzymes

    NARCIS (Netherlands)

    Vries, Johannes G. de; Lefort, Laurent

    2006-01-01

    For a more general implementation of asymmetric catalysis in the production of fine chemicals, the screening for new catalysts and ligands must be dramatically accelerated. This is possible with a high-throughput experimentation (HTE) approach. However, implementation of this technology requires the

  15. De Novo Synthesis of Furanose Sugars: Catalytic Asymmetric Synthesis of Apiose and Apiose-Containing Oligosaccharides.

    Science.gov (United States)

    Kim, Mijin; Kang, Soyeong; Rhee, Young Ho

    2016-08-01

    A de novo synthetic method towards apiose, a structurally unusual furanose, is reported. The key feature is sequential metal catalysis consisting of the palladium-catalyzed asymmetric intermolecular hydroalkoxylation of an alkoxyallene and subsequent ring-closing metathesis (RCM). This strategy enabled the efficient synthesis of various apiose-containing disaccharides and a unique convergent synthesis of trisaccharides. PMID:27381592

  16. Recent advances in the catalytic asymmetric synthesis of β-amino acids

    NARCIS (Netherlands)

    Weiner, Barbara; Szymanski, Wiktor; Janssen, Dick B.; Minnaard, Adriaan J.; Feringa, Ben L.

    2010-01-01

    In this critical review, the progress in catalytic asymmetric synthesis of β-amino acids is discussed, covering the literature since 2002. The review treats transition metal catalysis, organocatalysis and biocatalysis and covers the most important synthetic methods, such as hydrogenation, the Mannic

  17. Catalysis. Innovative applications in petrochemistry and refining. Preprints

    Energy Technology Data Exchange (ETDEWEB)

    Ernst, S.; Balfanz, U.; Jess, A.; Lercher, J.A.; Lichtscheidl, J.; Marchionna, M.; Nees, F.; Santacesaria, E. (eds.)

    2011-07-01

    Within the DGMK conference at 4th to 6th October, 2011 in Dresden (Federal Republic of Germany) the following lectures were held: (1) Developing linear-alpha-olefins technology - From laboratory to a commercial plant (A. Meiswinkel); (2) New developments in oxidation catalysis (F. Rosowski); (3) Study of the performance of vanadium based catalysts prepared by grafting in the oxidative dehydrogenation of propane (E. Santacesaria); (4) Hydrocracking for oriented conversion of heavy oils: recent trends for catalyst development (F. Bertoncini); (5) Acidic ionic liquids for n-alkane isomerization in a liquid-liquid or slurry-phase reaction mode (C. Meyer); (6) Dual catalyst system for the hydrocracking of heavy oils and residues (G. Bellussi); (7) Understanding hydrodenitrogenation on novel unsupported sulphide Mo-W-Ni catalysts (J. Hein); (8) Hydrocracking of ethyllaurate on bifunctional micro-/mesoporous composite materials (M. Adam); (9) Catalytic dehydration of ethanol to ethylene (Ying Zhu); (10) The Evonik-Uhde HPPO process for propylene oxide production (B. Jaeger); (11) A green two-step process for adipic acid production from cyclohexene: A study on parameters affecting selectivity (F. Cavani); (12) DISY: The direct synthesis of hydrogen peroxide, a bridge for innovative applications (R, Buzzoni); (13) Solid catalyst with ionic liquid layer (SCILL) - A concept to improve the selectivity of selective hydrogenations (A. Jess); (14) Co-Zn-Al based hydrotalcites as catalysts for Fischer-Tropsch process (C.L. Bianchi); (15) Honeycomb supports with high thermal conductivity for the Fischer-Tropsch synthesis (C.G. Visconti); (16) How to make Fischer-Tropsch catalyst scale-up fully reliable (L. Fischer); (17) New developments in FCC catalysis (C.P. Kelkar); (18) The potential of medium-pore zeolites for improved propene yields from catalytic cracking (F. Bager).

  18. Environmental catalysis: the Canadian situation

    Energy Technology Data Exchange (ETDEWEB)

    Aye, T.; Christensen, D.; Gostick, J.; Mogharei, A.; Oskin, G. O.; Won, W.; Aida, T. [Waterloo Univ. ON (Canada)

    2000-10-01

    The Canadian situation with respect to research in environmental catalysis was investigated by analyzing catalysis papers appearing in the 1999 and 2000 issues of major journals devoted to research in catalysis (Journal of Catalysis; Catalysis Today; Applied Catalysis A: General and B: Environmental). A total of 2150 papers were surveyed; of these 34 were by Canadian authors, with Canada ranking twentieth in the world in terms of research in this field. About 40 per cent of the catalysis papers were related to the environment, with nitrogen and sulphur emissions being the most important topics and energy conversion second. Hydrodesulphurization of petroleum oil, use of low sulphur coal and flue gas desulphurization are the principal processes for controlling sulfur emissions into the air, while nitrogen oxides emissions in automobiles are ccontrolled bt three-way catalysts. In power generation, selective catalytic reduction is the preferred method, although not in Canada, where installing low-NOx burners or using low nitrogen fuels such as natural gas are favored. The control of volatile organic compounds is also a serious problem. The two most promising processes for the Canadian situation are adsorption by activated carbon and catalysis using low-temperature catalysts. Water treatment of textile mill effluents, a favorite topics by Canadian authors, includes photocatalytic oxidation with titanium oxide photocatalyst, ozonation with activated carbons and a combination of photocatalysis and biological treatment. Carbon dioxide conversion was also a favoured topic by Canadian researchers; not surprising in view if the fact that Canada is the highest per capita producer of carbon dioxide emissions. Nearly two-thirds of the carbon dioxide emissions is due to the transportation and energy production sectors, therefore, any carbon dioxide mitigation strategies should be applied initially in these areas. Catalytic conversion of carbon dioxide into methanol, which then

  19. Photoredox Catalysis in Organic Chemistry

    Science.gov (United States)

    2016-01-01

    In recent years, photoredox catalysis has come to the forefront in organic chemistry as a powerful strategy for the activation of small molecules. In a general sense, these approaches rely on the ability of metal complexes and organic dyes to convert visible light into chemical energy by engaging in single-electron transfer with organic substrates, thereby generating reactive intermediates. In this Perspective, we highlight the unique ability of photoredox catalysis to expedite the development of completely new reaction mechanisms, with particular emphasis placed on multicatalytic strategies that enable the construction of challenging carbon–carbon and carbon–heteroatom bonds. PMID:27477076

  20. Catalysis and sustainable (green) chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Centi, Gabriele; Perathoner, Siglinda [Dipartimento di Chimica Industriale ed Ingegneria dei Materiali, University of Messina, Salita Sperone 31, 98166 Messina (Italy)

    2003-01-15

    Catalysis is a key technology to achieve the objectives of sustainable (green) chemistry. After introducing the concepts of sustainable (green) chemistry and a brief assessment of new sustainable chemical technologies, the relationship between catalysis and sustainable (green) chemistry is discussed and illustrated via an analysis of some selected and relevant examples. Emphasis is also given to the concept of catalytic technologies for scaling-down chemical processes, in order to develop sustainable production processes which reduce the impact on the environment to an acceptable level that allows self-depuration processes of the living environment.

  1. Photoredox Catalysis in Organic Chemistry.

    Science.gov (United States)

    Shaw, Megan H; Twilton, Jack; MacMillan, David W C

    2016-08-19

    In recent years, photoredox catalysis has come to the forefront in organic chemistry as a powerful strategy for the activation of small molecules. In a general sense, these approaches rely on the ability of metal complexes and organic dyes to convert visible light into chemical energy by engaging in single-electron transfer with organic substrates, thereby generating reactive intermediates. In this Perspective, we highlight the unique ability of photoredox catalysis to expedite the development of completely new reaction mechanisms, with particular emphasis placed on multicatalytic strategies that enable the construction of challenging carbon-carbon and carbon-heteroatom bonds. PMID:27477076

  2. Photoredox Catalysis in Organic Chemistry.

    Science.gov (United States)

    Shaw, Megan H; Twilton, Jack; MacMillan, David W C

    2016-08-19

    In recent years, photoredox catalysis has come to the forefront in organic chemistry as a powerful strategy for the activation of small molecules. In a general sense, these approaches rely on the ability of metal complexes and organic dyes to convert visible light into chemical energy by engaging in single-electron transfer with organic substrates, thereby generating reactive intermediates. In this Perspective, we highlight the unique ability of photoredox catalysis to expedite the development of completely new reaction mechanisms, with particular emphasis placed on multicatalytic strategies that enable the construction of challenging carbon-carbon and carbon-heteroatom bonds.

  3. CAS Researcher Wins International Catalysis Award

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Prof. Li Can, a CAS member and director of the State Key Laboratory of Catalysis at the CAS Dalian Institute of Chemical Physics, received the International Catalysis Award at the 13th International Catalysis Congress (ICC)held from July 11 to 16 in Paris.

  4. EMSL and Institute for Integrated Catalysis (IIC) Catalysis Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Charles T.; Datye, Abhaya K.; Henkelman, Graeme A.; Lobo, Raul F.; Schneider, William F.; Spicer, Leonard D.; Tysoe, Wilfred T.; Vohs, John M.; Baer, Donald R.; Hoyt, David W.; Thevuthasan, Suntharampillai; Mueller, Karl T.; Wang, Chong M.; Washton, Nancy M.; Lyubinetsky, Igor; Teller, Raymond G.; Andersen, Amity; Govind, Niranjan; Kowalski, Karol; Kabius, Bernd C.; Wang, Hongfei; Campbell, Allison A.; Shelton, William A.; Bylaska, Eric J.; Peden, Charles HF; Wang, Yong; King, David L.; Henderson, Michael A.; Rousseau, Roger J.; Szanyi, Janos; Dohnalek, Zdenek; Mei, Donghai; Garrett, Bruce C.; Ray, Douglas; Futrell, Jean H.; Laskin, Julia; DuBois, Daniel L.; Kuprat, Laura R.; Plata, Charity

    2011-05-24

    Within the context of significantly accelerating scientific progress in research areas that address important societal problems, a workshop was held in November 2010 at EMSL to identify specific and topically important areas of research and capability needs in catalysis-related science.

  5. Cyclopalladated complexes in enantioselective catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Dunina, Valeria V; Gorunova, Olga N; Zykov, P A; Kochetkov, Konstantin A

    2011-01-31

    The results of the use of optically active palladacycles in enantioselective catalysis of [3,3]-sigmatropic rearrangements, aldol condensation, the Michael reaction and cross-coupling are analyzed. Reactions with allylic substrates or reagents and some other transformations are considered.

  6. Cyclopalladated complexes in enantioselective catalysis

    Science.gov (United States)

    Dunina, Valeria V.; Gorunova, Olga N.; Zykov, P. A.; Kochetkov, Konstantin A.

    2011-01-01

    The results of the use of optically active palladacycles in enantioselective catalysis of [3,3]-sigmatropic rearrangements, aldol condensation, the Michael reaction and cross-coupling are analyzed. Reactions with allylic substrates or reagents and some other transformations are considered.

  7. Catalysis in Molten Ionic Media

    DEFF Research Database (Denmark)

    Boghosian, Soghomon; Fehrmann, Rasmus

    2013-01-01

    This chapter deals with catalysis in molten salts and ionic liquids, which are introduced and reviewed briefly, while an in-depth review of the oxidation catalyst used for the manufacturing of sulfuric acid and cleaning of flue gas from electrical power plants is the main topic of the chapter...

  8. Binding Energy and Enzymatic Catalysis.

    Science.gov (United States)

    Hansen, David E.; Raines, Ronald T.

    1990-01-01

    Discussed is the fundamental role that the favorable free energy of binding of the rate-determining transition state plays in catalysis. The principle that all of the catalytic factors discussed are realized by the use of this binding energy is reviewed. (CW)

  9. Nanoconfinement Effects in Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Kung, Harold [Northwestern Univ., Evanston, IL (United States)

    2016-09-19

    The objective of this study is to improve our understanding of the effect of active site environment in heterogeneous catalysis by synthesizing and probing the properties of nanostructures that would define the environment around an active site and could be modified according to design. In this investigation, the unique properties that stem from the constrained environment and enforced proximity of functional groups at the active site were demonstrated for a number of systems. The first system is a nanocage structure with silicon-based, atom-thick shells and molecular-size cavities. The shell imparts the expected size exclusion for access to the interior cavity, and the confined space together with the hydrophobic shell strongly influences the stability of charged groups. One consequence is that the interior amine groups in a siloxane nanocage exhibit a shift in their protonation ability that is equivalent to about 4 pH units. In another nanocage structure designed to possess a core-shell structure in which the core periphery is decorated with carboxylic acid groups and the shell interior is populated with silanol groups, the restricted motion of the core results in limiting the stoichiometry of reaction between carboxylic acid and a Co2CO8 complex, which leads to formation and stabilization of Co(I) ions in the nanocage. The second designed catalytic structure is a supported, isolated, Lewis acid Sn-oxide unit derived from a (POSS)-Sn-(POSS) molecular complex (POSS = incompletely condensed silsesquioxane). The Sn center in the (POSS)-Sn-(POSS) complex is present in a tetrahedral coordination, as confirmed by single crystal x-ray crystallography and Sn NMR, and its Lewis acid character is demonstrated with its binding to amines. The retention of the tetrahedral coordination of Sn after heterogenization and mild oxidative treatment is confirmed by characterization using EXAFS, NMR, UV-vis, and DRIFT, and its Lewis acid character is confirmed by stoichiometric

  10. Beyond relationships between homogeneous and heterogeneous catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, David A. [Univ. of Alabama, Tuscaloosa, AL (United States); Katz, Alexander [Univ. of California, Berkeley, CA (United States); Arslan, Ilke [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gates, Bruce C. [Univ. of California, Davis, CA (United States)

    2014-08-13

    Scientists who regard catalysis as a coherent field have been striving for decades to articulate the fundamental unifying principles. But because these principles seem to be broader than chemistry, chemical engineering, and materials science combined, catalytic scientists commonly interact within the sub-domains of homogeneous, heterogeneous, and bio-catalysis, and increasingly within even narrower domains such as organocatalysis, phase-transfer catalysis, acid-base catalysis, zeolite catalysis, etc. Attempts to unify catalysis have motivated researchers to find relationships between homogeneous and heterogeneous catalysis and to mimic enzymes. These themes have inspired vibrant international meetings and workshops, and we have benefited from the idea exchanges and have some thoughts about a path forward.

  11. Single flexible nanofiber to simultaneously realize electricity-magnetism bifunctionality

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Sheng, Shujuan; Ma, Qianli; Lv, Nan; Yu, Wensheng; Wang, Jinxian; Dong, Xiangting; Liu, Guixia, E-mail: wenshengyu2009@sina.com, E-mail: dongxiangting888@163.com [Key Laboratory of Applied Chemistry and Nanotechnology at Universities of Jilin Province, Changchun University of Science and Technology, Changchun (China)

    2016-03-15

    In order to develop new-typed multifunctional composite nanofibers, PANI/Fe{sub 3}O{sub 4}/PVP flexible bifunctional composite nanofibers with simultaneous electrical conduction and magnetism have been successfully fabricated via a facile electrospinning technology. Polyvinyl pyrrolidone (PVP) is used as a matrix to construct composite nanofibers containing different amounts of polyaniline (PANI) and Fe{sub 3}O{sub 4} nanoparticles (NPs). The bifunctional composite nanofibers simultaneously possess excellent electrical conductivity and magnetic properties. The electrical conductivity reaches up to the order of 10{sup -3} S·cm{sup -1}. The electrical conductivity and saturation magnetization of the composite nanofibers can be respectively tuned by adding various amounts of PANI and Fe{sub 3}O{sub 4} NPs. The obtained electricity-magnetism bifunctional composite nanofibers are expected to possess many potential applications in areas such as electromagnetic interference shielding, special coating, microwave absorption, molecular electronics and future nanomechanics. More importantly, the design concept and construct technique are of universal significance to fabricate other bifunctional one-dimensional nanostructures. (author)

  12. Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups

    Science.gov (United States)

    Roik, N. V.; Belyakova, L. A.

    2013-12-01

    Bifunctional mesoporous silicas with clearly distinguished localization of grafted groups on the surface of particles and inside their pores were obtained by means of sol-gel synthesis with postsynthetic vapor-phase treatment in vacuum. It was found that the synthesized materials have the hexagonally ordered porous structure typical of MCM-41 type silica.

  13. Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons

    NARCIS (Netherlands)

    Zecevic, Jovana; Vanbutsele, Gina; de Jong, Krijn P.; Martens, Johan A.

    2015-01-01

    The ability to control nanoscale features precisely is increasingly being exploited to develop and improve monofunctional catalysts(1-4). Striking effects might also be expected in the case of bifunctional catalysts, which are important in the hydrocracking of fossil and renewable hydrocarbon source

  14. New Tools for CO2 Fixation by Homogeneous Catalysis - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jessop, Phillip G.

    2006-01-20

    The overall goal is the development of new or more efficient methods for the conversion of CO{sub 2} into useful organic products, via the design or discovery of new catalysts, ligands, solvents, and methods. Specific objectives for this funded period: (1) To develop a high-throughput screening technique and use it to develop an efficient catalyst/reagent/solvent system for the synthesis of ureas or carboxylic acids. (2) To use in-situ spectroscopic and kinetic methods to study the mechanism of the synthesis of ureas or carboxylic acids. (3) To develop bifunctional ligands capable of secondary interactions with CO{sub 2}, to detect the interactions, and to demonstrate applications to catalysis.

  15. Methane Activation by Heterogeneous Catalysis

    OpenAIRE

    Horn, R.; Schlögl, R.

    2015-01-01

    Methane activation by heterogeneous catalysis will play a key role to secure the supply of energy, chemicals and fuels in the future. Methane is the main constituent of natural gas and biogas and it is also found in crystalline hydrates at the continental slopes of many oceans and in permafrost areas. In view of this vast reserves and resources, the use of methane as chemical feedstock has to be intensified. The present review presents recent results and developments in heterogeneous catalyti...

  16. Magnetic catalysis in nuclear matter

    OpenAIRE

    Haber, Alexander; Preis, Florian; Schmitt, Andreas

    2014-01-01

    A strong magnetic field enhances the chiral condensate at low temperatures. This so-called magnetic catalysis thus seeks to increase the vacuum mass of nucleons. We employ two relativistic field-theoretical models for nuclear matter, the Walecka model and an extended linear sigma model, to discuss the resulting effect on the transition between vacuum and nuclear matter at zero temperature. In both models we find that the creation of nuclear matter in a sufficiently strong magnetic field becom...

  17. Enzyme-Catalyzed Asymmetric Domino Thia-Michael/Aldol Condensation Using Pepsin.

    Science.gov (United States)

    Xiang, Yang; Song, Jian; Zhang, Yong; Yang, Da-Cheng; Guan, Zhi; He, Yan-Hong

    2016-07-15

    The novel catalytic promiscuity of pepsin from porcine gastric mucosa for the asymmetric catalysis of the domino thia-Michael/aldol condensation reaction in MeCN and buffer was discovered for the first time. Broad substrate specificity was tested, and a series of corresponding products were obtained with enantioselectivities of up to 84% ee. This specific catalysis was demonstrated by using recombinant pepsin and control experiments with denatured and inhibited pepsin. The reaction was also shown to occur in the active site by site-directed mutagenesis (the Asp32Ala mutant of pepsin), and a possible mechanism was proposed. PMID:27348476

  18. Reaction Selectivity in Heterogeneous Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Somorjai, Gabor A.; Kliewer, Christopher J.

    2009-02-02

    The understanding of selectivity in heterogeneous catalysis is of paramount importance to our society today. In this review we outline the current state of the art in research on selectivity in heterogeneous catalysis. Current in-situ surface science techniques have revealed several important features of catalytic selectivity. Sum frequency generation vibrational spectroscopy has shown us the importance of understanding the reaction intermediates and mechanism of a heterogeneous reaction, and can readily yield information as to the effect of temperature, pressure, catalyst geometry, surface promoters, and catalyst composition on the reaction mechanism. DFT calculations are quickly approaching the ability to assist in the interpretation of observed surface spectra, thereby making surface spectroscopy an even more powerful tool. HP-STM has revealed three vitally important parameters in heterogeneous selectivity: adsorbate mobility, catalyst mobility, and selective site-blocking. The development of size controlled nanoparticles from 0.8 to 10 nm, of controlled shape, and of controlled bimetallic composition has revealed several important variables for catalytic selectivity. Lastly, DFT calculations may be paving the way to guiding the composition choice for multi-metallic heterogeneous catalysis for the intelligent design of catalysts incorporating the many factors of selectivity we have learned.

  19. Catalysis by Design Using Surface Organometallic Nitrogen-Containing Fragments

    KAUST Repository

    Hamzaoui, Bilel

    2016-06-14

    The aim of this thesis is to explore the chemistry of well-defined silica-supported group 4 and group 5 complexes that contain one or more multiply-bonded nitrogen atoms. Such species have been recognized as crucial intermediates in many catalytic reactions (e.g. hydroaminoalkylation, olefin hydrogenation, imine metathesis…). The first chapter provided a bibliographic overview of the preparation and the reactivity of group 4 and 5 complexes towards hydroaminoalkylation and imine metathesis catalysis. The second chapter deals with the isolation and the characterization of a series of well-defined group 4 ƞ2-imine complexes surfaces species. 2D solid-state NMR (1H–13C HETCOR, Multiple Quantum) experiments have revealed consistently a unique structural rearrangement, viz azametallacycle occurring on the immobilized metal-amido ligands. Hydrogenolysis of the sole Zr-C bond in such species gives selectively a silica-supported zirconium monohydride that can perform the catalytic hydrogenation of olefins. The third chapter examines the mechanistic studies of the intermolecular hydroaminoalkylation using SOMC to identify the key metallacyclic surface intermediates (silica-supported three-membred and five-membered). The catalyst was regenerated by protonolysis and afforded pure amine. Catalytic testing of a selection of amine compounds with variable electronic properties was carried out. The fourth chapter deals with the generation and the characterization of well-defined silica-supported zirconium-imido complexes. The resulting species effectively catalyzes imine/imine cross-metathesis and thus considered as the first heterogeneous catalysts active for imine metathesis reaction. The fifth chapter studies the reaction of SBA15.1100 ºC with dry aniline and derivatives leading to opening strained siloxane bridges into acid-base paired functionalities (formation of N-phenylsilanamine-silanol pairs). This approach was successfully applied to the design of a series of

  20. Asymmetric Synthesis Using Enzymes in Supercritical CO2

    Institute of Scientific and Technical Information of China (English)

    T. Matsuda

    2005-01-01

    @@ 1Introduction Great efforts have been extended to catalysis in supercritical CO2 (scCO2) since the early 1990's due to the environmental friendliness, high diffusivity, high solubilizing power, easiness of the product separation,etc.. A combined process of scCO2 and enzymatic catalyst system would be a promising synthetic tool to produce optically active compounds because the enzyme has advantages of being natural and having high enantioselectivity in nature. Here we report asymmetric synthesis using lipase and alcohol dehydrogenase in scCO2[1,2].

  1. Nanometallic chemistry: deciphering nanoparticle catalysis from the perspective of organometallic chemistry and homogeneous catalysis.

    Science.gov (United States)

    Yan, Ning; Yuan, Yuan; Dyson, Paul J

    2013-10-01

    Nanoparticle (NP) catalysis is traditionally viewed as a sub-section of heterogeneous catalysis. However, certain properties of NP catalysts, especially NPs dispersed in solvents, indicate that there could be benefits from viewing them from the perspective of homogeneous catalysis. By applying the fundamental approaches and concepts routinely used in homogeneous catalysis to NP catalysts it should be possible to rationally design new nanocatalysts with superior properties to those currently in use.

  2. Cosmic strings and baryon decay catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, R.; Perkins, W.B.; Davis, A.C.; Brandenberger, R.H. (Fermi National Accelerator Lab., Batavia, IL (USA); Cambridge Univ. (UK); Brown Univ., Providence, RI (USA). Dept. of Physics)

    1989-09-01

    Cosmic strings, like monopoles, can catalyze proton decay. For integer charged fermions, the cross section for catalysis is not amplified, unlike in the case of monopoles. We review the catalysis processes both in the free quark and skyrmion pictures and discuss the implications for baryogenesis. We present a computation of the cross section for monopole catalyzed skyrmion decay using classical physics. We also discuss some effects which can screen catalysis processes. 32 refs., 1 fig.

  3. Hydrogen Production by Homogeneous Catalysis: Alcohol Acceptorless Dehydrogenation

    DEFF Research Database (Denmark)

    Nielsen, Martin

    2015-01-01

    in hydrogen production from biomass using homogeneous catalysis. Homogeneous catalysis has the advance of generally performing transformations at much milder conditions than traditional heterogeneous catalysis, and hence it constitutes a promising tool for future applications for a sustainable energy sector...

  4. Investigation of new bifunctional agents. D-Penicillamine

    International Nuclear Information System (INIS)

    Somatostatin inhibits the release of growth hormone (somatotropin) from the Anterior Pituitary. The main use of derivatives of somatostatin is to diagnose growth hormone problems and to use against some forms of cancer which involve growth hormone. Also somatostatin suppresses gastric acid secretion, gallbladder contractions, and pancreatic enzyme secretion. The aim of the current study is to investigate new bifunctional agents for labeling with 99mTc. Therefore D-Penicillamine was used as a bifunctional agent and compared to DTPA in the labeling with 99mTc. Quality controls were established using thin layer radio chromatography (TLRC) and electrophoresis techniques. In addition, high performance liquid radio chromatography (HPLRC) was also performed for elimination of possible uncertainties. The radiolabeled complexes maintained their stabilities throughout the study. The results obtained showed that 99mTc-D-Penicillamine-somatostatin is a promising potential radiopharmaceutical and an alternative of 99mTc-DTPA-somatostatin for in vivo and in vitro applications. (author)

  5. The aminoindanol core as a key scaffold in bifunctional organocatalysts.

    Science.gov (United States)

    G Sonsona, Isaac; Marqués-López, Eugenia; Herrera, Raquel P

    2016-01-01

    The 1,2-aminoindanol scaffold has been found to be very efficient, enhancing the enantioselectivity when present in organocatalysts. This may be explained by its ability to induce a bifunctional activation of the substrates involved in the reaction. Thus, it is easy to find hydrogen-bonding organocatalysts ((thio)ureas, squaramides, quinolinium thioamide, etc.) in the literature containing this favored structural core. They have been successfully employed in reactions such as Friedel-Crafts alkylation, Michael addition, Diels-Alder and aza-Henry reactions. However, the 1,2-aminoindanol core incorporated into proline derivatives has been scarcely explored. Herein, the most representative and illustrative examples are compiled and this review will be mainly focused on the cases where the aminoindanol moiety confers bifunctionality to the organocatalysts. PMID:27340443

  6. Chiral cyclopentadienylruthenium sulfoxide catalysts for asymmetric redox bicycloisomerization

    Science.gov (United States)

    Ryan, Michael C; Rao, Meera

    2016-01-01

    Summary A full account of our efforts toward an asymmetric redox bicycloisomerization reaction is presented in this article. Cyclopentadienylruthenium (CpRu) complexes containing tethered chiral sulfoxides were synthesized via an oxidative [3 + 2] cycloaddition reaction between an alkyne and an allylruthenium complex. Sulfoxide complex 1 containing a p-anisole moiety on its sulfoxide proved to be the most efficient and selective catalyst for the asymmetric redox bicycloisomerization of 1,6- and 1,7-enynes. This complex was used to synthesize a broad array of [3.1.0] and [4.1.0] bicycles. Sulfonamide- and phosphoramidate-containing products could be deprotected under reducing conditions. Catalysis performed with enantiomerically enriched propargyl alcohols revealed a matched/mismatched effect that was strongly dependent on the nature of the solvent. PMID:27559366

  7. Catalytic asymmetric synthesis of biologically important 3-hydroxyoxindoles: an update

    Science.gov (United States)

    2016-01-01

    Summary Oxindole scaffolds are prevalent in natural products and have been recognized as privileged substructures in new drug discovery. Several oxindole-containing compounds have advanced into clinical trials for the treatment of different diseases. Among these compounds, enantioenriched 3-hydroxyoxindole scaffolds also exist in natural products and have proven to possess promising biological activities. A large number of catalytic asymmetric strategies toward the construction of 3-hydroxyoxindoles based on transition metal catalysis and organocatalysis have been reported in the last decades. Additionally, 3-hydroxyoxindoles as versatile precursors have also been used in the total synthesis of natural products and for constructing structurally novel scaffolds. In this review, we aim to provide an overview about the catalytic asymmetric synthesis of biologically important 3-substituted 3-hydroxyoxindoles and 3-hydroxyoxindole-based further transformations. PMID:27340490

  8. Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons

    Science.gov (United States)

    Zecevic, Jovana; Vanbutsele, Gina; de Jong, Krijn P.; Martens, Johan A.

    2015-12-01

    The ability to control nanoscale features precisely is increasingly being exploited to develop and improve monofunctional catalysts. Striking effects might also be expected in the case of bifunctional catalysts, which are important in the hydrocracking of fossil and renewable hydrocarbon sources to provide high-quality diesel fuel. Such bifunctional hydrocracking catalysts contain metal sites and acid sites, and for more than 50 years the so-called intimacy criterion has dictated the maximum distance between the two types of site, beyond which catalytic activity decreases. A lack of synthesis and material-characterization methods with nanometre precision has long prevented in-depth exploration of the intimacy criterion, which has often been interpreted simply as ‘the closer the better’ for positioning metal and acid sites. Here we show for a bifunctional catalyst—comprising an intimate mixture of zeolite Y and alumina binder, and with platinum metal controllably deposited on either the zeolite or the binder—that closest proximity between metal and zeolite acid sites can be detrimental. Specifically, the selectivity when cracking large hydrocarbon feedstock molecules for high-quality diesel production is optimized with the catalyst that contains platinum on the binder, that is, with a nanoscale rather than closest intimacy of the metal and acid sites. Thus, cracking of the large and complex hydrocarbon molecules that are typically derived from alternative sources, such as gas-to-liquid technology, vegetable oil or algal oil, should benefit especially from bifunctional catalysts that avoid locating platinum on the zeolite (the traditionally assumed optimal location). More generally, we anticipate that the ability demonstrated here to spatially organize different active sites at the nanoscale will benefit the further development and optimization of the emerging generation of multifunctional catalysts.

  9. Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons

    Science.gov (United States)

    Zečević, Jovana; Vanbutsele, Gina; de Jong, Krijn P.; Martens, Johan A.

    2016-01-01

    The ability to precisely control nanoscale features is increasingly exploited to develop and improve monofunctional catalysts1–4. Striking effects might also be expected in the case of bifunctional catalysts, which play an important role in hydrocracking of fossil and renewable hydrocarbon sources to provide high-quality diesel fuel5–7. Such bifunctional hydrocracking catalysts contain metal sites and acid sites, and for more than 50 years the so-called ‘intimacy criterion’8 has dictated the maximum distance between the two site types beyond which catalytic activity decreases. The lack of synthesis and material characterization methods with nanometer precision has long prevented in-depth exploration of the criterion, which has often been interpreted simply as ‘the closer the better’ for positioning metal and acid sites8–11. Here we show for a bifunctional catalyst, comprised of an intimate mixture of zeolite Y and alumina binder and with platinum (Pt) metal controllably deposited20,21 on either the zeolite or the binder, that close proximity between metal and zeolite acid sites can be detrimental: the selectivity when cracking large hydrocarbon feedstock molecules for high-quality diesel production is optimized with the catalyst that contains Pt on the binder, i.e. with a larger distance between metal and acid sites. Cracking of the large and complex hydrocarbon molecules typically derived from alternative sources such as gas-to-liquid technology, vegetable oil or algal oil6–7 should thus benefit especially from bifunctional catalysts that avoid locating Pt on the zeolite as the traditionally assumed optimal location. More generally, we anticipate that the ability to spatially organize different active sites at the nanoscale demonstrated here will benefit the further development and optimization of the newly emerging generation of multifunctional catalysts12–15. PMID:26659185

  10. Fundamental concepts in heterogeneous catalysis

    CERN Document Server

    Norskov, Jens K; Abild-Pedersen, Frank; Bligaard, Thomas

    2014-01-01

    This book is based on a graduate course and suitable as a primer for any newcomer to the field, this book is a detailed introduction to the experimental and computational methods that are used to study how solid surfaces act as catalysts.   Features include:First comprehensive description of modern theory of heterogeneous catalysisBasis for understanding and designing experiments in the field   Allows reader to understand catalyst design principlesIntroduction to important elements of energy transformation technologyTest driven at Stanford University over several semesters

  11. Heterogeneous catalysis fundamentals and applications

    CERN Document Server

    Ross, Julian RH

    2011-01-01

    Heterogeneous catalysis plays a part in the production of more than 80% of all chemical products. It is therefore essential that all chemists and chemical engineers have an understanding of the fundamental principles as well as the applications of heterogeneous catalysts. This book introduces the subject, starting at a basic level, and includes sections on adsorption and surface science, catalytic kinetics, experimental methods for preparing and studying heterogeneous catalysts, as well as some aspects of the design of industrial catalytic reactors. It ends with a chapter that covers a range

  12. Asymmetric autocatalysis induced by meteoritic amino acids with hydrogen isotope chirality† †This article is part of a ChemComm ‘Catalysis in Organic Synthesis’ web-theme issue showcasing high quality research in organic chemistry. Please see our website (http://www.rsc.org/chemcomm/organicwebtheme2009) to access the other papers in this issue. ‡ ‡Electronic supplementary information (ESI) available: Procedures for the asymmetric autocatalysis in the presence of 1 and 2, the preparation of enantiomers of 1 and 2, and the determination of the enantiomeric purity of 1 and 2. See DOI: 10.1039/b908754k Click here for additional data file.

    Science.gov (United States)

    Kawasaki, Tsuneomi; Shimizu, Masako; Nishiyama, Daisuke; Ito, Masateru; Ozawa, Hitomi

    2009-01-01

    Achiral meteoritic amino acids, glycine and α-methylalanine, with hydrogen isotope (D/H) chirality, acted as the source of chirality in asymmetric autocatalysis with amplification of ee to afford highly enantioenriched 5-pyrimidyl alkanols. PMID:19597604

  13. DOE Laboratory Catalysis Research Symposium - Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Dunham, T.

    1999-02-01

    The conference consisted of two sessions with the following subtopics: (1) Heterogeneous Session: Novel Catalytic Materials; Photocatalysis; Novel Processing Conditions; Metals and Sulfides; Nuclear Magnetic Resonance; Metal Oxides and Partial Oxidation; Electrocatalysis; and Automotive Catalysis. (2) Homogeneous Catalysis: H-Transfer and Alkane Functionalization; Biocatalysis; Oxidation and Photocatalysis; and Novel Medical, Methods, and Catalyzed Reactions.

  14. Iron-, Cobalt-, and Nickel-Catalyzed Asymmetric Transfer Hydrogenation and Asymmetric Hydrogenation of Ketones.

    Science.gov (United States)

    Li, Yan-Yun; Yu, Shen-Luan; Shen, Wei-Yi; Gao, Jing-Xing

    2015-09-15

    Chiral alcohols are important building blocks in the pharmaceutical and fine chemical industries. The enantioselective reduction of prochiral ketones catalyzed by transition metal complexes, especially asymmetric transfer hydrogenation (ATH) and asymmetric hydrogenation (AH), is one of the most efficient and practical methods for producing chiral alcohols. In both academic laboratories and industrial operations, catalysts based on noble metals such as ruthenium, rhodium, and iridium dominated the asymmetric reduction of ketones. However, the limited availability, high price, and toxicity of these critical metals demand their replacement with abundant, nonprecious, and biocommon metals. In this respect, the reactions catalyzed by first-row transition metals, which are more abundant and benign, have attracted more and more attention. As one of the most abundant metals on earth, iron is inexpensive, environmentally benign, and of low toxicity, and as such it is a fascinating alternative to the precious metals for catalysis and sustainable chemical manufacturing. However, iron catalysts have been undeveloped compared to other transition metals. Compared with the examples of iron-catalyzed asymmetric reduction, cobalt- and nickel-catalyzed ATH and AH of ketones are even seldom reported. In early 2004, we reported the first ATH of ketones with catalysts generated in situ from iron cluster complex and chiral PNNP ligand. Since then, we have devoted ourselves to the development of ATH and AH of ketones with iron, cobalt, and nickel catalysts containing novel chiral aminophosphine ligands. In our study, the iron catalyst containing chiral aminophosphine ligands, which are expected to control the stereochemistry at the metal atom, restrict the number of possible diastereoisomers, and effectively transfer chiral information, are successful catalysts for enantioselective reduction of ketones. Among these novel chiral aminophosphine ligands, 22-membered macrocycle P2N4

  15. Supported Molten Metal Catalysis. A New Class of Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ravindra Datta; Ajeet Singh; Manuela Serban; Istvan Halasz

    2006-06-02

    We describe a new class of heterogeneous catalysts called supported molten metal catalysis (SMMC), in which molten metal catalysts are dispersed as nanodroplets on the surface of porous supports, allowing much larger active surface area than is possible in conventional contacting techniques for catalytic metals that are molten under reaction conditions, thus greatly enhancing their activity and potential utility. Specific examples of different types of reactions are provided to demonstrate the broad applicability of the technique in designing active, selective, and stable new catalysts. It is shown that dispersing the molten metal on a support in the suggested manner can enhance the rate of a reaction by three to four orders of magnitude as a result of the concomitant increase in the active surface area. New reaction examples include {gamma}-Al{sub 2}O{sub 3} supported molten Te (melting point 450 C) and Ga (MP 30 C) catalysts for bifunctional methylcyclohexane dehydrogenation. These catalysts provide activity similar to conventional Pt-based catalysts for this with better resistance to coking. In addition, results are described for a controlled pore glass supported molten In (MP 157 C) catalyst for the selective catalytic reduction of NO with ethanol in the presence of water, demonstrating activities superior to conventional catalysts for this reaction. A discussion is also provided on the characterization of the active surface area and dispersion of these novel supported catalysts. It is clear based on the results described that the development of new active and selective supported molten metal catalysts for practical applications is entirely plausible.

  16. Asymmetrical international attitudes

    NARCIS (Netherlands)

    Van Oudenhoven, JP; Askevis-Leherpeux, F; Hannover, B; Jaarsma, R; Dardenne, B

    2002-01-01

    In general, attitudes towards nations have a fair amount of reciprocity: nations either like each other are relatively indifferent to each other or dislike each other Sometimes, however international attitudes are asymmetrical. In this study, we use social identity theory in order to explain asymmet

  17. An asymmetric Kadison's inequality

    CERN Document Server

    Bourin, Jean-Christophe

    2010-01-01

    Some inequalities for positive linear maps on matrix algebras are given, especially asymmetric extensions of Kadison's inequality and several operator versions of Chebyshev's inequality. We also discuss well-known results around the matrix geometric mean and connect it with complex interpolation.

  18. "Nanocrystal bilayer for tandem catalysis"

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Yusuke; Tsung, Chia Kuang; Huang, Wenyu; Huo, Ziyang; E.Habas, Susan E; Soejima, Tetsuro; Aliaga, Cesar E; Samorjai, Gabor A; Yang, Peidong

    2011-01-24

    Supported catalysts are widely used in industry and can be optimized by tuning the composition and interface of the metal nanoparticles and oxide supports. Rational design of metal-metal oxide interfaces in nanostructured catalysts is critical to achieve better reaction activities and selectivities. We introduce here a new class of nanocrystal tandem catalysts that have multiple metal-metal oxide interfaces for the catalysis of sequential reactions. We utilized a nanocrystal bilayer structure formed by assembling platinum and cerium oxide nanocube monolayers of less than 10 nm on a silica substrate. The two distinct metal-metal oxide interfaces, CeO2-Pt and Pt-SiO2, can be used to catalyse two distinct sequential reactions. The CeO2-Pt interface catalysed methanol decomposition to produce CO and H2, which were subsequently used for ethylene hydroformylation catalysed by the nearby Pt-SiO2 interface. Consequently, propanal was produced selectively from methanol and ethylene on the nanocrystal bilayer tandem catalyst. This new concept of nanocrystal tandem catalysis represents a powerful approach towards designing high-performance, multifunctional nanostructured catalysts

  19. Development of New Chiral Bicyclic Ligands : Applications in Catalytic Asymmetric Transfer Hydrogenation, Epoxidations, and Epoxide Rearrangements

    OpenAIRE

    Gayet, Arnaud

    2005-01-01

    This thesis describes the synthesis and application of new chiral bicyclic ligands and their application in asymmetric catalysis. The studies involved: [i] The development of novel chiral bicyclic amino sulfur ligands and their use in transfer hydrogenation. [ii] The development of the kinetic resolution of racemic epoxide through the use of chiral lithium amides. [iii] The synthesis and application of chiral bicyclic amine in the organocatalysed epoxidation of alkenes. [iv] Development and a...

  20. REDUCTIVE ACTIVATION OF DIOXYGEN FOR DEGRADATION OF METHYL TERT-BUTYL ETHER BY BIFUNCTION

    Science.gov (United States)

    Bifunctional aluminum is prepared by sulfating aluminum metal with sulfuric acid. The use of bifunctional aluminum to degrade methyl tert-butyl ether (MTBE) in the presence of dioxygen has been examined using batch systems. Primary degradation products were tert-butyl alcohol, ...

  1. Asymmetric information and economics

    Science.gov (United States)

    Frieden, B. Roy; Hawkins, Raymond J.

    2010-01-01

    We present an expression of the economic concept of asymmetric information with which it is possible to derive the dynamical laws of an economy. To illustrate the utility of this approach we show how the assumption of optimal information flow leads to a general class of investment strategies including the well-known Q theory of Tobin. Novel consequences of this formalism include a natural definition of market efficiency and an uncertainty principle relating capital stock and investment flow.

  2. Asymmetric Organocatalytic Cycloadditions

    DEFF Research Database (Denmark)

    Mose, Rasmus

    2016-01-01

    were pioneered by Otto Paul Hermann Diels and Kurt Alder who discovered what later became known as the Diels Alder reaction. The Diels Alder reaction is a [4+2] cycloaddition in which a π4 component reacts with a π2 component via a cyclic transition state to generate a 6 membered ring. This reaction...... reactions constitute the first organocatalytic asymmetric higher order cycloadditions and a rational for the periselectivity and stereoselectivity is provided based on experimental and computational investigations....

  3. Surface science and heterogeneous catalysis

    International Nuclear Information System (INIS)

    The catalytic reactions studied include hydrocarbon conversion over platinum, the transition metal-catalyzed hydrogenation of carbon monoxide, and the photocatalyzed dissociation of water over oxide surfaces. The method of combined surface science and catalytic studies is similar to those used in synthetic organic chemistry. The single-crystal models for the working catalyst are compared with real catalysts by comparing the rates of cyclopropane ring opening on platinum and the hydrogenation of carbon monoxide on rhodium single crystal surface with those on practical commercial catalyst systems. Excellent agreement was obtained for these reactions. This document reviews what was learned about heterogeneous catalysis from these surface science approaches over the past 15 years and present models of the active catalyst surface

  4. Magnetic Catalysis vs Magnetic Inhibition

    CERN Document Server

    Fukushima, Kenji

    2012-01-01

    We discuss the fate of chiral symmetry in an extremely strong magnetic field B. We investigate not only quark fluctuations but also neutral meson effects. The former would enhance the chiral-symmetry breaking at finite B according to the Magnetic Catalysis, while the latter would suppress the chiral condensate once B exceeds the scale of the hadron structure. Using a chiral model we demonstrate how neutral mesons are subject to the dimensional reduction and the low dimensionality favors the chiral-symmetric phase. We point out that this effect, the Magnetic Inhibition, can be a feasible explanation for recent lattice-QCD data indicating the decreasing behavior of the chiral-restoration temperature with increasing B.

  5. Nanocrystal assembly for tandem catalysis

    Science.gov (United States)

    Yang, Peidong; Somorjai, Gabor; Yamada, Yusuke; Tsung, Chia-Kuang; Huang, Wenyu

    2014-10-14

    The present invention provides a nanocrystal tandem catalyst comprising at least two metal-metal oxide interfaces for the catalysis of sequential reactions. One embodiment utilizes a nanocrystal bilayer structure formed by assembling sub-10 nm platinum and cerium oxide nanocube monolayers on a silica substrate. The two distinct metal-metal oxide interfaces, CeO.sub.2--Pt and Pt--SiO.sub.2, can be used to catalyze two distinct sequential reactions. The CeO.sub.2--Pt interface catalyzed methanol decomposition to produce CO and H.sub.2, which were then subsequently used for ethylene hydroformylation catalyzed by the nearby Pt--SiO.sub.2 interface. Consequently, propanal was selectively produced on this nanocrystal bilayer tandem catalyst.

  6. Inverse Magnetic/Shear Catalysis

    CERN Document Server

    McInnes, Brett

    2015-01-01

    It is well known that very large magnetic fields are generated when the Quark-Gluon Plasma is formed during peripheral heavy-ion collisions. Lattice, holographic, and other studies strongly suggest that these fields may, for observationally relevant field values, induce ``inverse magnetic catalysis'', signalled by a lowering of the critical temperature for the chiral/deconfinement transition. The theoretical basis of this effect has recently attracted much attention; yet so far these investigations have not included another, equally dramatic consequence of the peripheral collision geometry: the QGP acquires a large angular momentum vector, parallel to the magnetic field. Here we use holographic techniques to argue that the angular momentum can also, independently, have an effect on transition temperatures, and we obtain a rough estimate of the relative effects of the presence of both a magnetic field and an angular momentum density. We find that the shearing angular momentum reinforces the effect of the magne...

  7. Palladium catalysis for energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Pfefferle, L. D.; Datye, Abhaya

    2001-03-01

    Palladium (Pd) is an attractive catalyst for a range of new combustion applications comprising primary new technologies for future industrial energy needs, including gas turbine catalytic combustion, auto exhaust catalysts, heating and fuel cells. Pd poses particular challenges because it changes both chemical state and morphology as a function of temperature and reactant environment and those changes result in positive and negative changes in activity. Interactions with the support, additives, water, and contaminants as well as carbon formation have also been observed to affect Pd catalyst performance. This report describes the results of a 3.5 year project that resolves some of the conflicting reports in the literature about the performance of Pd-based catalysis.

  8. Supported Ionic Liquid Phase (SILP) catalysis

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Haumann, Marco;

    2006-01-01

    Applications of ionic liquids to replace conventional solvents in homogeneous transition-metal catalysis have increased significantly during the last decade. Biphasic ionic liquid/organic liquid systems offer advantages with regard to product separation, catalyst stability, and recycling...... but utilise in the case of fast chemical reactions only a small amount of expensive ionic liquid and catalyst. The novel Supported Ionic Liquid Phase (SILP) catalysis concept overcomes these drawbacks and allows the use of fixed-bed reactors for continuous reactions. In this Microreview the SILP catalysis...

  9. Bifunctional chelating agents for targeted α-particle radiotherapy

    International Nuclear Information System (INIS)

    An α-emitting radionuclide is proposed as a better choice for application in radiotherapy of either leukemias or lymphomas due to very high cytotoxicity, short emission path length, and immediate energy deposition minimizing collateral cytotoxicity. Metallic α-emitters that have been studied are 212Bi and 213Bi. Bifunctional derivatives of diethylenetriamine pentaacetic acid (DTPA) were found to form Bi(III) complexes that were labile in vivo. Pre-clinical experiments confirmed both the stability of the CHX-DTPA ligands for the Bi(III) isotopes and the therapeutic applicability of these α-emitting isotopes

  10. A bifunctional perovskite catalyst for oxygen reduction and evolution.

    Science.gov (United States)

    Jung, Jae-Il; Jeong, Hu Young; Lee, Jang-Soo; Kim, Min Gyu; Cho, Jaephil

    2014-04-25

    La0.3(Ba0.5Sr0.5)0.7Co0.8Fe0.2O3d is a promising bifunctional perovskite catalyst for the oxygen reduction reaction and the oxygen evolution reaction. This catalyst has circa 10 nm-scale rhombohedral LaCoO3 cobaltite particles distributed on the surface. The dynamic microstructure phenomena are attributed to the charge imbalance from the replacement of A-site cations with La3+ and local stress on Cosite sub-lattice with the cubic perovskite structure.

  11. Bifunctional xylanases and their potential use in biotechnology

    Digital Repository Service at National Institute of Oceanography (India)

    Khandeparker, R.; Numan, M.Th.

    showed signiWcant similarity (33– 40% identical residues) to a diVerent group of bacterial xylanases and exoglucanases exempliWed by the Caldocel- lum saccharolyticum xynA and celB products. The xynA product is, therefore, a bifunctional enzyme having two... biochemistry of fungal and bacterial cellulolytic enzyme system. In: Aubert JP, Be- guin P, Millet J (eds) Biochemistry and genetics of cellulose deg- radation. Academic Press, London, pp 11–30 19. Cui W, Wood PJ, Blackwell B, Nikiforuk J (2000) Physicochemi...

  12. Biomimetic catalysis: Taking on the turnover challenge

    Science.gov (United States)

    Hooley, Richard J.

    2016-03-01

    Emulating the efficiency with which enzymes catalyse reactions has often been used as inspiration to develop self-assembled cages. Now two studies present approaches to achieving catalyst turnover -- one of the biggest challenges in achieving truly biomimetic catalysis.

  13. Bioorthogonal catalysis: Rise of the nanobots

    Science.gov (United States)

    Unciti-Broceta, Asier

    2015-07-01

    Bioorthogonal catalysis provides new ways of mediating artificial transformations in living environs. Now, researchers have developed a nanodevice whose catalytic activity can be regulated by host-guest chemistry.

  14. A Course in Kinetics and Catalysis.

    Science.gov (United States)

    Bartholomew, C. H.

    1981-01-01

    Describes a one-semester, three-credit hour course integrating the fundamentals of kinetics and the scientific/engineering principles of heterogeneous catalysis. Includes course outline, list of texts, background readings, and topical journal articles. (SK)

  15. Micelle Catalysis of an Aromatic Substitution Reaction

    Science.gov (United States)

    Corsaro, Gerald; Smith J. K.

    1976-01-01

    Describes an experiment in which the iodonation of aniline reaction is shown to undergo catalysis in solution of sodium lauryl sulfate which forms micelles with negatively charged pseudo surfaces. (MLH)

  16. Theory of laser catalysis with pulses

    CERN Document Server

    Vardi, A

    2001-01-01

    The possibility of accelerating molecular reactions by lasers has attracted considerable theoretical and experimental interest. A particular example of laser-modified reaction dynamics is laser catalysis, a process in which the tunneling through a potential barrier is enhanced by transient excitation to a bound electronic state. We have performed detailed calculations of pulsed laser catalysis on one- and two-dimensional potentials, as a function of the reactants' collision energy and the laser's central frequency. In agreement with previous CW results, the reactive lineshapes are Fano-type curves, resulting from interference between nonradiative tunneling and the optically assisted pathway. In contrast to the CW process, the power requirements of pulsed laser catalysis are well within the reach of commonly used pulsed laser sources, making an experimental realization possible. The laser catalysis scenario is shown to be equivalent in the ``dressed'' state picture, to resonant tunneling through a double-barri...

  17. Sucrose Inversion An Experiment on Heterogeneous Catalysis

    OpenAIRE

    Adélio Mendes; Magalhães, Fernão D.; Luis M. Madeira

    2003-01-01

    llustration of heterogeneous catalysis concepts in laboratory courses is not usually simple or economical. For our undergraduate senior lab course we have developed an environmentally friendly experiment dealing with several aspects of heterogeneous catalysis, having in mind the use of readily available and relatively inexpensive equipment, and chemicals on a compact setup, which students can safely operate. The experiment deals with the acid-catalyzed sucrose inversion, performed in packed b...

  18. Recent advances in homogeneous nickel catalysis.

    Science.gov (United States)

    Tasker, Sarah Z; Standley, Eric A; Jamison, Timothy F

    2014-05-15

    Tremendous advances have been made in nickel catalysis over the past decade. Several key properties of nickel, such as facile oxidative addition and ready access to multiple oxidation states, have allowed the development of a broad range of innovative reactions. In recent years, these properties have been increasingly understood and used to perform transformations long considered exceptionally challenging. Here we discuss some of the most recent and significant developments in homogeneous nickel catalysis, with an emphasis on both synthetic outcome and mechanism.

  19. Loop residues and catalysis in OMP synthase

    DEFF Research Database (Denmark)

    Wang, Gary P.; Hansen, Michael Riis; Grubmeyer, Charles

    2012-01-01

    (preceding paper in this issue, DOI 10.1021/bi300083p)]. The full expression of KIEs by H105A and E107A may result from a less secure closure of the catalytic loop. The lower level of expression of the KIE by K103A suggests that in these mutant proteins the major barrier to catalysis is successful closure...... of the catalytic loop, which when closed, produces rapid and reversible catalysis....

  20. Photovoltachromic device with a micropatterned bifunctional counter electrode.

    Science.gov (United States)

    Cannavale, Alessandro; Manca, Michele; De Marco, Luisa; Grisorio, Roberto; Carallo, Sonia; Suranna, Gian Paolo; Gigli, Giuseppe

    2014-02-26

    A photovoltachromic window can potentially act as a smart glass skin which generates electric energy as a common dye-sensitized solar cell and, at the same time, control the incoming energy flux by reacting to even small modifications in the solar radiation intensity. We report here the successful implementation of a novel architecture of a photovoltachromic cell based on an engineered bifunctional counter electrode consisting of two physically separated platinum and tungsten oxide regions, which are arranged to form complementary comb-like patterns. Solar light is partially harvested by a dye-sensitized photoelectrode made on the front glass of the cell which fully overlaps a bifunctional counter electrode made on the back glass. When the cell is illuminated, the photovoltage drives electrons into the electrochromic stripes through the photoelectrochromic circuit and promotes the Li(+) diffusion towards the WO3 film, which thus turns into its colored state: a photocoloration efficiency of 17 cm(2) min(-1) W(-1) at a wavelength of 650 nm under 1.0 sun was reported along with fast response (coloration time photovoltaic functionality was also retained due to the copresence of the independently switchable micropatterned platinum electrode.

  1. Pharmaceutical Industry Oriented Homogeneous Catalysis

    Institute of Scientific and Technical Information of China (English)

    Zhang Xumu

    2004-01-01

    Chiral therapeutics already makes up over one-third of pharmaceutical drugs currently sold worldwide. This is a growing industry with global chiral drug sales for 2002 increasing by 12%to $160 billion (Technology Catalysts International) of a total drug market of $410bn. The increasing demand to produce enantiomerically pure pharmaceuticals, agrochemicals, flavors, and other fine chemicals has advanced the field of asymmetric catalytic technologies.We aim to become a high value technology provider and partner in the chiral therapeutics industry by offering proprietary catalysts, novel building blocks, and collaborative synthetic solutions. In decade, we have developed a set of novel chiral homogeneous phosphorus ligands such as Binaphane, Me-KetalPhos, TangPhos, f-Binaphane, Me-f-KetalPhos, C4TunePhos and Binapine,which we called Chiral Ligand ToolKit. Complementing the ToolKit, (R, S, S, R)-DIOP*, T-Phos,o-BIPHEP, o-BINAPO and FAP were added recently[1].These ligands can be applied to a broad variety of drug structural features by asymmetric hydrogenation of dehydroamino acid derivatives, enamides, unsatisfied acids and esters, ketones,beta ketoesters, imines and cyclic imines. And ligand FAP had been apllied succefully in allylic alkylation and [3+2] cycloaddition.

  2. Asymmetric synthesis v.4

    CERN Document Server

    Morrison, James

    1984-01-01

    Asymmetric Synthesis, Volume 4: The Chiral Carbon Pool and Chiral Sulfur, Nitrogen, Phosphorus, and Silicon Centers describes the practical methods of obtaining chiral fragments. Divided into five chapters, this book specifically examines initial chiral transmission and extension. The opening chapter describes the so-called chiral carbon pool, the readily available chiral carbon fragments used as building blocks in synthesis. This chapter also provides a list of 375 chiral building blocks, along with their commercial sources, approximate prices, and methods of synthesis. Schemes involving

  3. Asymmetric organic/metal(oxide) hybrid nanoparticles: synthesis and applications.

    Science.gov (United States)

    He, Jie; Liu, Yijing; Hood, Taylor C; Zhang, Peng; Gong, Jinlong; Nie, Zhihong

    2013-06-21

    Asymmetric particles (APs) with broken centrosymmetry are of great interest, due to the asymmetric surface properties and diverse functionalities. In particular, organic/metal(oxide) APs naturally combine the significantly different and complementary properties of organic and inorganic species, leading to their unique applications in various fields. In this review article, we highlighted recent advances in the synthesis and applications of organic/metal(oxide) APs. This type of APs is grounded on chemical or physical interactions between metal(oxide) NPs and organic small molecular or polymeric ligands. The synthetic methodologies were summarized in three categories, including the selective surface modifications, phase separation of mixed ligands on the surface of metal(oxide) NPs, and direct synthesis of APs. We further discussed the unique applications of organic/metal(oxide) APs in self-assembly, sensors, catalysis, and biomedicine, as a result of the distinctions between asymmetrically distributed organic and inorganic components. Finally, challenges and future directions are discussed in an outlook section.

  4. Synthesis and Characterization of a New Bifunctional Dye Containing Spirobenzopyran and Cinnamoyl Moiety

    Institute of Scientific and Technical Information of China (English)

    申凯华; 崔东熏

    2005-01-01

    A novel bifunctional dye containing spirobenzopyran and cinnaznoyl moiety has been prepared and its photochromic behavior following irradiation at different wavelengths of monochrome UV light was investigated.The colourless bifunctional dye in film or solution exhibits unusual photochromism through structural and geometrical transformation from spirobenzopyran to merocyanine accompanying with photocrosslinking reaction in cinnamoyl moieties. Two kinds of photochemical reaction were achieved by irradiation at the different wavelengths of monochrome UV light (275 nm, 365 nm) selectively. The photochromic process of the bifunctional dye was discussed and the dynamic behaviors of the decolorization process were investigated.

  5. Asymmetric quantum cloning machines

    International Nuclear Information System (INIS)

    A family of asymmetric cloning machines for quantum bits and N-dimensional quantum states is introduced. These machines produce two approximate copies of a single quantum state that emerge from two distinct channels. In particular, an asymmetric Pauli cloning machine is defined that makes two imperfect copies of a quantum bit, while the overall input-to-output operation for each copy is a Pauli channel. A no-cloning inequality is derived, characterizing the impossibility of copying imposed by quantum mechanics. If p and p' are the probabilities of the depolarizing channels associated with the two outputs, the domain in (√p,√p')-space located inside a particular ellipse representing close-to-perfect cloning is forbidden. This ellipse tends to a circle when copying an N-dimensional state with N→∞, which has a simple semi-classical interpretation. The symmetric Pauli cloning machines are then used to provide an upper bound on the quantum capacity of the Pauli channel of probabilities px, py and pz. The capacity is proven to be vanishing if (√px, √py, √pz) lies outside an ellipsoid whose pole coincides with the depolarizing channel that underlies the universal cloning machine. Finally, the tradeoff between the quality of the two copies is shown to result from a complementarity akin to Heisenberg uncertainty principle. (author)

  6. Asymmetric inclusion process

    Science.gov (United States)

    Reuveni, Shlomi; Eliazar, Iddo; Yechiali, Uri

    2011-10-01

    We introduce and explore the asymmetric inclusion process (ASIP), an exactly solvable bosonic counterpart of the fermionic asymmetric exclusion process (ASEP). In both processes, random events cause particles to propagate unidirectionally along a one-dimensional lattice of n sites. In the ASEP, particles are subject to exclusion interactions, whereas in the ASIP, particles are subject to inclusion interactions that coalesce them into inseparable clusters. We study the dynamics of the ASIP, derive evolution equations for the mean and probability generating function (PGF) of the sites’ occupancy vector, obtain explicit results for the above mean at steady state, and describe an iterative scheme for the computation of the PGF at steady state. We further obtain explicit results for the load distribution in steady state, with the load being the total number of particles present in all lattice sites. Finally, we address the problem of load optimization, and solve it under various criteria. The ASIP model establishes bridges between statistical physics and queueing theory as it represents a tandem array of queueing systems with (unlimited) batch service, and a tandem array of growth-collapse processes.

  7. ISOTOPE METHODS IN HOMOGENEOUS CATALYSIS.

    Energy Technology Data Exchange (ETDEWEB)

    BULLOCK,R.M.; BENDER,B.R.

    2000-12-01

    The use of isotope labels has had a fundamentally important role in the determination of mechanisms of homogeneously catalyzed reactions. Mechanistic data is valuable since it can assist in the design and rational improvement of homogeneous catalysts. There are several ways to use isotopes in mechanistic chemistry. Isotopes can be introduced into controlled experiments and followed where they go or don't go; in this way, Libby, Calvin, Taube and others used isotopes to elucidate mechanistic pathways for very different, yet important chemistries. Another important isotope method is the study of kinetic isotope effects (KIEs) and equilibrium isotope effect (EIEs). Here the mere observation of where a label winds up is no longer enough - what matters is how much slower (or faster) a labeled molecule reacts than the unlabeled material. The most careti studies essentially involve the measurement of isotope fractionation between a reference ground state and the transition state. Thus kinetic isotope effects provide unique data unavailable from other methods, since information about the transition state of a reaction is obtained. Because getting an experimental glimpse of transition states is really tantamount to understanding catalysis, kinetic isotope effects are very powerful.

  8. Inverse magnetic/shear catalysis

    Science.gov (United States)

    McInnes, Brett

    2016-05-01

    It is well known that very large magnetic fields are generated when the Quark-Gluon Plasma is formed during peripheral heavy-ion collisions. Lattice, holographic, and other studies strongly suggest that these fields may, for observationally relevant field values, induce "inverse magnetic catalysis", signalled by a lowering of the critical temperature for the chiral/deconfinement transition. The theoretical basis of this effect has recently attracted much attention; yet so far these investigations have not included another, equally dramatic consequence of the peripheral collision geometry: the QGP acquires a large angular momentum vector, parallel to the magnetic field. Here we use holographic techniques to argue that the angular momentum can also, independently, have an effect on transition temperatures, and we obtain a rough estimate of the relative effects of the presence of both a magnetic field and an angular momentum density. We find that the shearing angular momentum reinforces the effect of the magnetic field at low values of the baryonic chemical potential, but that it can actually decrease that effect at high chemical potentials.

  9. Advanced Resources for Catalysis Science; Recommendations for a National Catalysis Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    Peden, Charles HF.; Ray, Douglas

    2005-10-05

    Catalysis is one of the most valuable contributors to our economy and historically an area where the United States has enjoyed, but is now losing, international leadership. While other countries are stepping up their work in this area, support for advanced catalysis research and development in the U.S. has diminished. Yet, more than ever, innovative and improved catalyst technologies are imperative for new energy production processes to ease our dependence on imported resources, for new energy-efficient and environmentally benign chemical production processes, and for new emission reduction technologies to minimize the environmental impact of an active and growing economy. Addressing growing concerns about the future direction of U.S. catalysis science, experts from the catalysis community met at a workshop to determine and recommend advanced resources needed to address the grand challenges for catalysis research and development. The workshop's primary conclusion: To recapture our position as the leader in catalysis innovation and practice, and promote crucial breakthroughs, the U.S. must establish one or more well-funded and well-equipped National Catalysis Research Institutes competitively selected, centered in the national laboratories and, by charter, networked to other national laboratories, universities, and industry. The Institute(s) will be the center of a national collaboratory that gives catalysis researchers access to the most advanced techniques available in the scientific enterprise. The importance of catalysis to our energy, economic, and environmental security cannot be overemphasized. Catalysis is a vital part of our core industrial infrastructure, as it is integral to chemical processing and petroleum refining, and is critical to proposed advances needed to secure a sustainable energy future. Advances in catalysis could reduce our need for foreign oil by making better use of domestic carbon resources, for example, allowing cost-effective and

  10. Alternative Asymmetric Stochastic Volatility Models

    NARCIS (Netherlands)

    M. Asai (Manabu); M.J. McAleer (Michael)

    2010-01-01

    textabstractThe stochastic volatility model usually incorporates asymmetric effects by introducing the negative correlation between the innovations in returns and volatility. In this paper, we propose a new asymmetric stochastic volatility model, based on the leverage and size effects. The model is

  11. Engineered Asymmetric Synthetic Vesicles

    Science.gov (United States)

    Lu, Li; Chiarot, Paul

    2013-11-01

    Synthetic vesicles are small, fluid-filled spheres that are enclosed by a bilayer of lipid molecules. They can be used as models for investigating membrane biology and as delivery vehicles for pharmaceuticals. In practice, it is difficult to simultaneously control membrane asymmetry, unilamellarity, vesicle size, vesicle-to-vesicle uniformity, and luminal content. Membrane asymmetry, where each leaflet of the bilayer is composed of different lipids, is of particular importance as it is a feature of most natural membranes. In this study, we leverage microfluidic technology to build asymmetric vesicles at high-throughput. We use the precise flow control offered by microfluidic devices to make highly uniform emulsions, with controlled internal content, that serve as templates to build the synthetic vesicles. Flow focusing, dielectrophoretic steering, and interfacial lipid self-assembly are critical procedures performed on-chip to produce the vesicles. Fluorescent and confocal microscopy are used to evaluate the vesicle characteristics.

  12. Asymmetric black dyonic holes

    Directory of Open Access Journals (Sweden)

    I. Cabrera-Munguia

    2015-04-01

    Full Text Available A 6-parametric asymptotically flat exact solution, describing a two-body system of asymmetric black dyons, is studied. The system consists of two unequal counterrotating Kerr–Newman black holes, endowed with electric and magnetic charges which are equal but opposite in sign, separated by a massless strut. The Smarr formula is generalized in order to take into account their contribution to the mass. The expressions for the horizon half-length parameters σ1 and σ2, as functions of the Komar parameters and of the coordinate distance, are displayed, and the thermodynamic properties of the two-body system are studied. Furthermore, the seven physical parameters satisfy a simple algebraic relation which can be understood as a dynamical scenario, in which the physical properties of one body are affected by the ones of the other body.

  13. Bifunctional chelates of RH-105 and AU199 as potential radiotherapeutic agents

    Energy Technology Data Exchange (ETDEWEB)

    Droege, P.

    1997-03-01

    Research is presented on new bifunctional chelating ligand systems with stability on the macroscopic and radiochemical levels. The synthesis of the following complexes are described: rhodium 105, palladium 109, and gold 198.

  14. Chemoselective Reactivity of Bifunctional Cyclooctynes on Si(001)

    CERN Document Server

    Reutzel, Marcel; Lipponer, Marcus A; Länger, Christian; Höfer, Ulrich; Koert, Ulrich; Dürr, Michael

    2016-01-01

    Controlled organic functionalization of silicon surfaces as integral part of semiconductor technology offers new perspectives for a wide range of applications. The high reactivity of the silicon dangling bonds, however, presents a major hindrance for the first basic reaction step of such a functionalization, i.e., the chemoselective attachment of bifunctional organic molecules on the pristine silicon surface. We overcome this problem by employing cyclooctyne as the major building block of our strategy. Functionalized cyclooctynes are shown to react on Si(001) selectively via the strained cyclooctyne triple bond while leaving the side groups intact. The achieved selectivity originates from the distinctly different adsorption dynamics of the separate functionalities: A direct adsorption pathway is demonstrated for cyclooctyne as opposed to the vast majority of other organic functional groups. The latter ones react on Si(001) via a metastable intermediate which makes them effectively unreactive in competition wi...

  15. GSK-3: A Bifunctional Role in Cell Death Pathways

    Directory of Open Access Journals (Sweden)

    Keith M. Jacobs

    2012-01-01

    Full Text Available Although glycogen synthase kinase-3 beta (GSK-3β was originally named for its ability to phosphorylate glycogen synthase and regulate glucose metabolism, this multifunctional kinase is presently known to be a key regulator of a wide range of cellular functions. GSK-3β is involved in modulating a variety of functions including cell signaling, growth metabolism, and various transcription factors that determine the survival or death of the organism. Secondary to the role of GSK-3β in various diseases including Alzheimer’s disease, inflammation, diabetes, and cancer, small molecule inhibitors of GSK-3β are gaining significant attention. This paper is primarily focused on addressing the bifunctional or conflicting roles of GSK-3β in both the promotion of cell survival and of apoptosis. GSK-3β has emerged as an important molecular target for drug development.

  16. GSK-3β: A Bifunctional Role in Cell Death Pathways

    Science.gov (United States)

    Jacobs, Keith M.; Bhave, Sandeep R.; Ferraro, Daniel J.; Jaboin, Jerry J.; Hallahan, Dennis E.; Thotala, Dinesh

    2012-01-01

    Although glycogen synthase kinase-3 beta (GSK-3β) was originally named for its ability to phosphorylate glycogen synthase and regulate glucose metabolism, this multifunctional kinase is presently known to be a key regulator of a wide range of cellular functions. GSK-3β is involved in modulating a variety of functions including cell signaling, growth metabolism, and various transcription factors that determine the survival or death of the organism. Secondary to the role of GSK-3β in various diseases including Alzheimer's disease, inflammation, diabetes, and cancer, small molecule inhibitors of GSK-3β are gaining significant attention. This paper is primarily focused on addressing the bifunctional or conflicting roles of GSK-3β in both the promotion of cell survival and of apoptosis. GSK-3β has emerged as an important molecular target for drug development. PMID:22675363

  17. Opioid bifunctional ligands from morphine and the opioid pharmacophore Dmt-Tic.

    Science.gov (United States)

    Balboni, Gianfranco; Salvadori, Severo; Marczak, Ewa D; Knapp, Brian I; Bidlack, Jean M; Lazarus, Lawrence H; Peng, Xuemei; Si, Yu Gui; Neumeyer, John L

    2011-02-01

    Bifunctional ligands containing an ester linkage between morphine and the δ-selective pharmacophore Dmt-Tic were synthesized, and their binding affinity and functional bioactivity at the μ, δ and κ opioid receptors determined. Bifunctional ligands containing or not a spacer of β-alanine between the two pharmacophores lose the μ agonism deriving from morphine becoming partial μ agonists 4 or μ antagonists 5. Partial κ agonism is evidenced only for compound 4. Finally, both compounds showed potent δ antagonism.

  18. Shape-Persistent Multimetallic Cartwheel Complexes: Design, Catalysis and Recycling

    NARCIS (Netherlands)

    Dijkstra, H.P.

    2002-01-01

    An important new research area in the field of homogeneous catalysis is the development of catalytic processes which combine the advantages of homogeneous (high activity/selectivity, mild conditions, reproducibility, good catalyst description) and heterogeneous catalysis (easy catalyst recycling, lo

  19. Geometrically induced magnetic catalysis and critical dimensions

    CERN Document Server

    Flachi, Antonino; Vitagliano, Vincenzo

    2015-01-01

    We discuss the combined effect of magnetic fields and geometry in interacting fermionic systems. At leading order in the heat-kernel expansion, the infrared singularity (that in flat space leads to the magnetic catalysis) is regulated by the chiral gap effect and the catalysis is deactivated by effect of the curvature. We discover that an infrared singularity may reappear from higher-order terms in the heat kernel expansion leading to a novel form of geometrically induced magnetic catalysis (absent in flat space). The dynamical mass squared is then modified not only due to the chiral gap effect by an amount proportional to the curvature, but also by a magnetic shift $\\propto (4-D)eB$ where $D$ represents the number of space-time dimensions. We argue that $D=4$ is a critical dimension across which the behaviour of the magnetic shift changes qualitatively.

  20. Progress towards bioorthogonal catalysis with organometallic compounds.

    Science.gov (United States)

    Völker, Timo; Dempwolff, Felix; Graumann, Peter L; Meggers, Eric

    2014-09-22

    The catalysis of bioorthogonal transformations inside living organisms is a formidable challenge--yet bears great potential for future applications in chemical biology and medicinal chemistry. We herein disclose highly active organometallic ruthenium complexes for bioorthogonal catalysis under biologically relevant conditions and inside living cells. The catalysts uncage allyl carbamate protected amines with unprecedented high turnover numbers of up to 270 cycles in the presence of water, air, and millimolar concentrations of thiols. By live-cell imaging of HeLa cells and with the aid of a caged fluorescent probe we could reveal a rapid development of intense fluorescence within the cellular cytoplasm and therefore support the proposed bioorthogonality of the catalysts. In addition, to illustrate the manifold applications of bioorthogonal catalysis, we developed a method for catalytic in-cell activation of a caged anticancer drug, which efficiently induced apoptosis in HeLa cells.

  1. Green chemistry by nano-catalysis

    KAUST Repository

    Polshettiwar, Vivek

    2010-01-01

    Nano-materials are important in many diverse areas, from basic research to various applications in electronics, biochemical sensors, catalysis and energy. They have emerged as sustainable alternatives to conventional materials, as robust high surface area heterogeneous catalysts and catalyst supports. The nano-sized particles increase the exposed surface area of the active component of the catalyst, thereby enhancing the contact between reactants and catalyst dramatically and mimicking the homogeneous catalysts. This review focuses on the use of nano-catalysis for green chemistry development including the strategy of using microwave heating with nano-catalysis in benign aqueous reaction media which offers an extraordinary synergistic effect with greater potential than these three components in isolation. To illustrate the proof-of-concept of this "green and sustainable" approach, representative examples are discussed in this article. © 2010 The Royal Society of Chemistry.

  2. Asymmetric plasmonic induced ionic noise in metallic nanopores

    Science.gov (United States)

    Li, Yi; Chen, Chang; Willems, Kherim; Lagae, Liesbet; Groeseneken, Guido; Stakenborg, Tim; van Dorpe, Pol

    2016-06-01

    We present distinct asymmetric plasmon-induced noise properties of ionic transport observed through gold coated nanopores. We thoroughly investigated the effects of bias voltage and laser illumination. We show that the potential drop across top-coated silicon nanocavity pores can give rise to a large noise asymmetry (~2-3 orders of magnitude). Varying the bias voltage has an appreciable effect on the noise density spectra, typically in the Lorentzian components. The laser power is found to strongly affect the ionic noise level as well as the voltage threshold for light-induced noise generation. The asymmetric noise phenomenon is attributed to plasmon-induced interfacial reactions which promote light-induced charge fluctuation in the ion flow and allow voltage modulation of photo-induced carriers surmounting over such Schottky junctions. We further compare the ionic noise performances of gold nanocavities containing different material stacks, among which thermal oxide passivation of the silicon successfully mitigates the light-induced noise and is also fully CMOS-compatible. The understanding of the described noise characteristics will help to foster multiple applications using related structures including plasmonic-based sensing or plasmon-induced catalysis such as water splitting or solar energy conversion devices.We present distinct asymmetric plasmon-induced noise properties of ionic transport observed through gold coated nanopores. We thoroughly investigated the effects of bias voltage and laser illumination. We show that the potential drop across top-coated silicon nanocavity pores can give rise to a large noise asymmetry (~2-3 orders of magnitude). Varying the bias voltage has an appreciable effect on the noise density spectra, typically in the Lorentzian components. The laser power is found to strongly affect the ionic noise level as well as the voltage threshold for light-induced noise generation. The asymmetric noise phenomenon is attributed to plasmon

  3. A Systematic Investigation of Quaternary Ammonium Ions as Asymmetric Phase Transfer Catalysts. Application of Quantitative Structure Activity/Selectivity Relationships

    OpenAIRE

    Denmark, Scott E.; Gould, Nathan D.; Wolf, Larry M

    2011-01-01

    While the synthetic utility of asymmetric phase transfer catalysis continues to expand, the number of proven catalyst types and design criteria remains limited. At the origin of this scarcity is a lack in understanding of how catalyst structural features affect the rate and enantioselectivity of phase transfer catalyzed reactions. Described in this paper is the development of quantitative structure-activity relationships (QSAR) and -selectivity relationships (QSSR) for the alkylation of a pro...

  4. Next-Generation Catalysis for Renewables: Combining Enzymatic with Inorganic Heterogeneous Catalysis for Bulk Chemical Production

    DEFF Research Database (Denmark)

    Vennestrøm, Peter Nicolai Ravnborg; Christensen, C.H.; Pedersen, S.;

    2010-01-01

    chemical platform under different conditions than those conventionally employed. Indeed, new process and catalyst concepts need to be established. Both enzymatic catalysis (biocatalysis) and heterogeneous inorganic catalysis are likely to play a major role and, potentially, be combined. One type...... of combination involves one-pot cascade catalysis with active sites from bio- and inorganic catalysts. In this article the emphasis is placed specifically on oxidase systems involving the coproduction of hydrogen peroxide, which can be used to create new in situ collaborative oxidation reactions for bulk...

  5. RNA catalysis and the origins of life

    Science.gov (United States)

    Orgel, Leslie E.

    1986-01-01

    The role of RNA catalysis in the origins of life is considered in connection with the discovery of riboszymes, which are RNA molecules that catalyze sequence-specific hydrolysis and transesterification reactions of RNA substrates. Due to this discovery, theories positing protein-free replication as preceding the appearance of the genetic code are more plausible. The scope of RNA catalysis in biology and chemistry is discussed, and it is noted that the development of methods to select (or predict) RNA sequences with preassigned catalytic functions would be a major contribution to the study of life's origins.

  6. Bioinspired catalysis metal-sulfur complexes

    CERN Document Server

    Weigand, Wolfgang

    2014-01-01

    The growing interest in green chemistry calls for new, efficient and cheap catalysts. Living organisms contain a wide range of remarkably powerful enzymes, which can be imitated by chemists in the search for new catalysts. In bioinspired catalysis, chemists use the basic principles of biological enzymes when creating new catalyst analogues. In this book, an international group of experts cover the topic from theoretical aspects to applications by including a wide variety of examples of different systems. This valuable overview of bioinspired metal-sulfur catalysis is a must-have for all sci

  7. Catalysis by nonmetals rules for catalyst selection

    CERN Document Server

    Krylov, Oleg V

    1970-01-01

    Catalysis by Non-metals: Rules of Catalyst Selection presents the development of scientific principles for the collection of catalysts. It discusses the investigation of the mechanism of chemosorption and catalysis. It addresses a series of properties of solid with catalytic activity. Some of the topics covered in the book are the properties of a solid and catalytic activity in oxidation-reduction reactions; the difference of electronegativities and the effective charges of atoms; the role of d-electrons in the catalytic properties of a solid; the color of solids; and proton-acid and proton-ba

  8. Heterogeneous catalysis at nanoscale for energy applications

    CERN Document Server

    Tao, Franklin (Feng); Kamat, Prashant V

    2015-01-01

    This book presents both the fundamentals concepts and latest achievements of a field that is growing in importance since it represents a possible solution for global energy problems.  It focuses on an atomic-level understanding of heterogeneous catalysis involved in important energy conversion processes. It presents a concise picture for the entire area of heterogeneous catalysis with vision at the atomic- and nano- scales, from synthesis, ex-situ and in-situ characterization, catalytic activity and selectivity, to mechanistic understanding based on experimental exploration and theoretical si

  9. Keynotes in energy-related catalysis

    CERN Document Server

    Kaliaguine, S

    2011-01-01

    Catalysis by solid acids, which includes (modified) zeolites, is of special relevance to energy applications. Acid catalysis is highly important in modern petroleum refining operations - large-scale processes such as fluid catalytic cracking, catalytic reforming, alkylation and olefin oligomerization rely on the transformation of hydrocarbons by acid catalysts. (Modified) zeolites are therefore essential for the improvement of existing processes and for technical innovations in the conversion of crude. There can be little doubt that zeolite-based catalysts will play a major role in the futu

  10. Well-Defined Dinuclear Gold Complexes for Preorganization-Induced Selective Dual Gold Catalysis.

    Science.gov (United States)

    Vreeken, Vincent; Broere, Daniël L J; Jans, Anne C H; Lankelma, Marianne; Reek, Joost N H; Siegler, Maxime A; van der Vlugt, Jarl Ivar

    2016-08-16

    The synthesis, reactivity, and potential of well-defined dinuclear gold complexes as precursors for dual gold catalysis are explored. Using the preorganizing abilities of the ditopic PN(H) P(iPr) (L(H) ) ligand, dinuclear Au(I) -Au(I) complex 1 and mixed-valent Au(I) -Au(III) complex 2 provide access to structurally characterized chlorido-bridged cationic species 3 and 4 upon halide abstraction. For 2, this transformation involves unprecedented two-electron oxidation of the redox-active ligand, generating a highly rigidified environment for the Au2 core. Facile reaction with phenylacetylene affords the σ,π-activated phenylacetylide complex 5. When applied in the dual gold heterocycloaddition of a urea-functionalized alkyne, well-defined precatalyst 3 provides high regioselectivities for the anti-Markovnikov product, even at low catalyst loadings, and outperforms common mononuclear Au(I) systems. This proof-of-concept demonstrates the benefit of preorganization of two gold centers to enforce selective non-classical σ,π-activation with bifunctional substrates. PMID:27430938

  11. Alkene Metathesis Catalysis: A Key for Transformations of Unsaturated Plant Oils and Renewable Derivatives

    Directory of Open Access Journals (Sweden)

    Dixneuf Pierre H.

    2016-03-01

    Full Text Available This account presents the importance of ruthenium-catalysed alkene cross-metathesis for the catalytic transformations of biomass derivatives into useful intermediates, especially those developed by the authors in the Rennes (France catalysis team in cooperation with chemical industry. The cross-metathesis of a variety of functional alkenes arising from plant oils, with acrylonitrile and fumaronitrile and followed by catalytic tandem hydrogenation, will be shown to afford linear amino acid derivatives, the precursors of polyamides. The exploration of cross-metathesis of bio-sourced unsaturated nitriles with acrylate with further catalytic hydrogenation has led to offer an excellent route to α,ω-amino acid derivatives. That of fatty aldehydes has led to bifunctional long chain aldehydes and saturated diols. Two ways of access to functional dienes by ruthenium-catalyzed ene-yne cross-metathesis of plant oil alkene derivatives with alkynes and by cross-metathesis of bio-sourced alkenes with allylic chloride followed by catalytic dehydrohalogenation, are reported. Ricinoleate derivatives offer a direct access to chiral dihydropyrans and tetrahydropyrans via ring closing metathesis. Cross-metathesis giving value to terpenes and eugenol for the straightforward synthesis of artificial terpenes and functional eugenol derivatives without C=C bond isomerization are described.

  12. Asymmetric Gepner Models (Revisited)

    CERN Document Server

    Gato-Rivera, B

    2010-01-01

    We reconsider a class of heterotic string theories studied in 1989, based on tensor products of N=2 minimal models with asymmetric simple current invariants. We extend this analysis from (2,2) and (1,2) spectra to (0,2) spectra with SO(10) broken to the Standard Model. In the latter case the spectrum must contain fractionally charged particles. We find that in nearly all cases at least some of them are massless. However, we identify a large subclass where the fractional charges are at worst half-integer, and often vector-like. The number of families is very often reduced in comparison to the 1989 results, but there are no new tensor combinations yielding three families. All tensor combinations turn out to fall into two classes: those where the number of families is always divisible by three, and those where it is never divisible by three. We find an empirical rule to determine the class, which appears to extend beyond minimal N=2 tensor products. We observe that distributions of physical quantities such as th...

  13. Magnetically Modified Asymmetric Supercapacitors Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase I project is for the development of an asymmetric supercapacitor that will have improved energy density and cycle...

  14. Organocatalysis and asymmetric catalysis : new applications of ferrocenylphosphines and nitromethane addition to conjugated substrates

    OpenAIRE

    Pereira, Susana Isabel Dinis

    2008-01-01

    A presente dissertação centrou-se em duas areas de investigação distintas: o estudo de novas aplicações de ferrocenilfosfinas e a adição conjugada de nitrometano a substratos conjugados. Tendo em conta êxito do grupo do Prof. Carretero no desenvolvimento e uso de 1-fosfino-2-sulfenilferrocenos (ligandos Fesulphos) enquanto catalizadores quirais, propusemo-nos estudar a possibilidade de as ferrocenil dialquilfosfinas, compostos estáveis ao ar e ricos em electrões graças à sua...

  15. Primary amine/CSA ion pair: A powerful catalytic system for the asymmetric enamine catalysis

    KAUST Repository

    Liu, Chen

    2011-05-20

    A novel ion pair catalyst containing a chiral counteranion can be readily derived by simply mixing cinchona alkaloid-derived diamine with chiral camphorsulfonic acid (CSA). A mixture of 9-amino(9-deoxy)epi-quinine 8 and (-)-CSA was found to be the best catalyst with matching chirality, enabling the direct amination of α-branched aldehydes to proceed in quantitative yields and with nearly perfect enantioselectivities. A 0.5 mol % catalyst loading was sufficient to catalyze the reaction, and a gram scale enantioselective synthesis of biologically important α-methyl phenylglycine has been successfully demonstrated. © 2011 American Chemical Society.

  16. Turning Cucurbit[8]uril into a Supramolecular Nanoreactor for Asymmetric Catalysis.

    Science.gov (United States)

    Zheng, Lifei; Sonzini, Silvia; Ambarwati, Masyitha; Rosta, Edina; Scherman, Oren A; Herrmann, Andreas

    2015-10-26

    Chirale CB[n]‐Katalysatoren: Ein supramolekulares Katalysatorsystem auf Basis von CB[8] baut in Gegenwart einer natürlichen l‐Aminosäure einen chiralen Nanoreaktor für eine asymmetrische Lewis‐säure‐katalysierte Diels‐Alder‐Reaktion auf, die um Faktoren bis 9.5 beschleunigt ist und Enantioselektivitäten bis 92 % ee liefert. Die Bildung des Nanoreaktors wurde spektroskopisch und mit isothermer Kalorimetrie untersucht.WILEY-VCH.

  17. µ-reactors for Heterogeneous Catalysis

    DEFF Research Database (Denmark)

    Jensen, Robert

    is described in detail. Since heating and temperature measurement is an extremely important point in heterogeneous catalysis an entire chapter is dedicated to this subject. Three different types of heaters have been implemented and tested both for repeatability and homogeneity of the heating as well...

  18. Homogeneous Catalysis by Transition Metal Compounds.

    Science.gov (United States)

    Mawby, Roger

    1988-01-01

    Examines four processes involving homogeneous catalysis which highlight the contrast between the simplicity of the overall reaction and the complexity of the catalytic cycle. Describes how catalysts provide circuitous routes in which all energy barriers are relatively low rather than lowering the activation energy for a single step reaction.…

  19. Supported ionic liquid-phase (SILP) catalysis

    DEFF Research Database (Denmark)

    Riisager, Anders; Fehrmann, Rasmus; Wasserscheid, P.;

    2005-01-01

    The concept of supported ionic liquid-phase (SILP) catalysis has been demonstrated for gas- and liquid-phase continuous fixed-bed reactions using rhodium phosphine catalyzed hydroformylation of propene and 1-octene as examples. The nature of the support had important influence on both the catalytic...

  20. Heterogeneous catalysis in highly sensitive microreactors

    DEFF Research Database (Denmark)

    Olsen, Jakob Lind

    This thesis present a highly sensitive silicon microreactor and examples of its use in studying catalysis. The experimental setup built for gas handling and temperature control for the microreactor is described. The implementation of LabVIEW interfacing for all the experimental parts makes...

  1. Diffusion and Surface Reaction in Heterogeneous Catalysis

    Science.gov (United States)

    Baiker, A.; Richarz, W.

    1978-01-01

    Ethylene hydrogenation on a platinum catalyst, electrolytically applied to a tube wall, is a good system for the study of the interactions between diffusion and surface reaction in heterogeneous catalysis. Theoretical background, apparatus, procedure, and student performance of this experiment are discussed. (BB)

  2. A molecular view of heterogeneous catalysis

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Nørskov, Jens Kehlet

    2008-01-01

    by enabling a rational design of new catalysts. We illustrate this important development in heterogeneous catalysis by highlighting recent examples of catalyst systems for which it has been possible to achieve such a detailed understanding. In particular, we emphasize examples where this progress has made...

  3. Hydroxide catalysis bonding of silicon carbide

    NARCIS (Netherlands)

    Veggel, A.A. van; Ende, D.A. van den; Bogenstahl, J.; Rowan, S.; Cunningham, W.; Gubbels, G.H.M.; Nijmeijer, H.

    2008-01-01

    For bonding silicon carbide optics, which require extreme stability, hydroxide catalysis bonding is considered [Rowan, S., Hough, J. and Elliffe, E., Silicon carbide bonding. UK Patent 040 7953.9, 2004. Please contact Mr. D. Whiteford for further information: D.Whiteford@admin.gla.ac.uk]. This techn

  4. On Asymmetric Quantum MDS Codes

    CERN Document Server

    Ezerman, Martianus Frederic; Ling, San

    2010-01-01

    Assuming the validity of the MDS Conjecture, the weight distribution of all MDS codes is known. Using a recently-established characterization of asymmetric quantum error-correcting codes, linear MDS codes can be used to construct asymmetric quantum MDS codes with $d_{z} \\geq d_{x}\\geq 2$ for all possible values of length $n$ for which linear MDS codes over $\\F_{q}$ are known to exist.

  5. Mobile Termination with Asymmetric Networks

    OpenAIRE

    Dewenter, Ralf; Haucap, Justus

    2003-01-01

    This paper examines mobile termination fees and their regulation when networks are asymmetric in size. It is demonstrated that with consumer ignorance about the exact termination rates (a) a mobile network?s termination rate is the higher the smaller the network?s size (as measured through its subscriber base) and (b) asymmetric regulation of only the larger operators in a market will, ce-teris paribus, induce the smaller operators to increase their termination rates. The results are supporte...

  6. Asymmetric Gepner models (revisited)

    Energy Technology Data Exchange (ETDEWEB)

    Gato-Rivera, B. [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands)] [Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain); Schellekens, A.N., E-mail: t58@nikhef.n [NIKHEF Theory Group, Kruislaan 409, 1098 SJ Amsterdam (Netherlands)] [Instituto de Fisica Fundamental, CSIC, Serrano 123, Madrid 28006 (Spain)] [IMAPP, Radboud Universiteit, Nijmegen (Netherlands)

    2010-12-11

    We reconsider a class of heterotic string theories studied in 1989, based on tensor products of N=2 minimal models with asymmetric simple current invariants. We extend this analysis from (2,2) and (1,2) spectra to (0,2) spectra with SO(10) broken to the Standard Model. In the latter case the spectrum must contain fractionally charged particles. We find that in nearly all cases at least some of them are massless. However, we identify a large subclass where the fractional charges are at worst half-integer, and often vector-like. The number of families is very often reduced in comparison to the 1989 results, but there are no new tensor combinations yielding three families. All tensor combinations turn out to fall into two classes: those where the number of families is always divisible by three, and those where it is never divisible by three. We find an empirical rule to determine the class, which appears to extend beyond minimal N=2 tensor products. We observe that distributions of physical quantities such as the number of families, singlets and mirrors have an interesting tendency towards smaller values as the gauge groups approaches the Standard Model. We compare our results with an analogous class of free fermionic models. This displays similar features, but with less resolution. Finally we present a complete scan of the three family models based on the triply-exceptional combination (1,16{sup *},16{sup *},16{sup *}) identified originally by Gepner. We find 1220 distinct three family spectra in this case, forming 610 mirror pairs. About half of them have the gauge group SU(3)xSU(2){sub L}xSU(2){sub R}xU(1){sup 5}, the theoretical minimum, and many others are trinification models.

  7. Gold-Copper Nanoparticles: Nanostructural Evolution and Bifunctional Catalytic Sites

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Jun; Shan, Shiyao; Yang, Lefu; Mott, Derrick; Malis, Oana; Petkov, Valeri; Cai, Fan; Ng, Mei; Luo, Jin; Chen, Bing H.; Engelhard, Mark H.; Zhong, Chuan-Jian

    2012-12-12

    Understanding of the atomic-scale structure is essential for exploiting the unique catalytic properties of any nanoalloy catalyst. This report describes novel findings of an investigation of the nanoscale alloying of gold-copper (AuCu) nanoparticles and its impact on the surface catalytic functions. Two pathways have been explored for the formation of AuCu nanoparticles of different compositons, including wet chemical synthesis from mixed Au- and Cu-precursor molecules, and nanoscale alloying via an evolution of mixed Au- and Cu-precursor nanoparticles near the nanoscale melting temperatures. For the evolution of mixed precursor nanoparticles, synchrotron x-ray based in-situ real time XRD was used to monitor the structural changes, revealing nanoscale alloying and reshaping towards an fcc-type nanoalloy (particle or cube) via a partial melting–resolidification mechanism. The nanoalloys supported on carbon or silica were characterized by in-situ high-energy XRD/PDFs, revealing an intriguing lattice "expanding-shrinking" phenomenon depending on whether the catalyst is thermochemically processed under oxidative or reductive atmosphere. This type of controllable structural changes is found to play an important role in determining the catalytic activity of the catalysts for carbon monoxide oxidation reaction. The tunable catalytic activities of the nanoalloys under thermochemically oxidative and reductive atmospheres are also discussed in terms of the bifunctional sites and the surface oxygenated metal species for carbon monoxide and oxygen activation.

  8. Gold(I) catalysts with bifunctional P, N ligands.

    Science.gov (United States)

    Wetzel, Corinna; Kunz, Peter C; Thiel, Indre; Spingler, Bernhard

    2011-08-15

    A series of phosphanes with imidazolyl substituents were prepared as hemilabile PN ligands. The corresponding gold(I) complexes were tested as bifunctional catalysts in the Markovnikov hydration of 1-octyne, as well as in the synthesis of propargylamines by the three component coupling reaction of piperidine, benzaldehyde, and phenylacetylene. While the activity in the hydration of 1-octyne was low, the complexes are potent catalysts for the three component coupling reaction. In homogeneous solution the conversions to the respective propargylamine were considerably higher than under aqueous biphasic conditions. The connectivity of the imidazolyl substituents to the phosphorus atom, their substitution pattern, as well as the number of heteroaromatic substituents have pronounced effects on the catalytic activity of the corresponding gold(I) complexes. Furthermore, formation of polymetallic species with Au(2), Au(3), and Au(4) units has been observed and the solid-state structures of the compounds [(5)(2)Au(3)Cl(2)]Cl and [(3c)(2)Au(4)Cl(2)]Cl(2) (3c = tris(2-isopropylimidazol-4(5)-yl phosphane, 5 = 2-tert-butylimidazol-4(5)-yldiphenyl phosphane) were determined. The gold(I) complexes of imidazol-2-yl phosphane ligands proved to be a novel source for bis(NHC)gold(I) complexes (NHC = N-heterocyclic carbene). PMID:21761834

  9. Bifunctional alkyl nitrates - trace constituents of the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Kastler, J. [Department of Analytical and Environmental Chemistry, University of Ulm (Germany); Ballschmiter, K. [Center of Technology Assessment in Baden-Wuerttemberg, Stuttgart (Germany)

    1998-04-01

    Mono- and multifunctional esters of nitric acid (alkyl nitrates or organonitrates) form very complex mixtures of organic trace constituents in air. An analytical method was developed which combines selectivity in separation and detection in order to simplify this complexity in analytical terms. Mononitrates, dinitrates, keto nitrates, hydroxy nitrates of alkanes and alkenes, respecitvely, and bifunctional terpene nitrates were synthesized as reference substances. A specially developed new HPLC stationary phase (organonitrate phase) allows a group separation of mono-, di-, and hydroxy nitrates. After the HPLC preseparation the single components were finally separated by capillary HRGC-ECD and HRGC-MSD on polar and non-polar stationary phases. Mass spectrometric detection in the selected-ion-mode using the highly selective NO{sub 2}{sup +} fragment (m/z = 46 amu) led to very good selectivities for the nitric acid ester moiety. The analysis of a 100 m{sup 3} ambient air sample using this new analytical protocol allowed the identification of seven hydroxy nitrates and 24 dinitrates ranging from C2 to C7, 22 of them for the first time ever. (orig.) With 3 figs., 3 tabs., 20 refs.

  10. Bioinspired Bifunctional Membrane for Efficient Clean Water Generation.

    Science.gov (United States)

    Liu, Yang; Lou, Jinwei; Ni, Mengtian; Song, Chengyi; Wu, Jianbo; Dasgupta, Neil P; Tao, Peng; Shang, Wen; Deng, Tao

    2016-01-13

    Solving the problems of water pollution and water shortage is an urgent need for the sustainable development of modern society. Different approaches, including distillation, filtration, and photocatalytic degradation, have been developed for the purification of contaminated water and the generation of clean water. In this study, we explored a new approach that uses solar light for both water purification and clean water generation. A bifunctional membrane consisting of a top layer of TiO2 nanoparticles (NPs), a middle layer of Au NPs, and a bottom layer of anodized aluminum oxide (AAO) was designed and fabricated through multiple filtration processes. Such a design enables both TiO2 NP-based photocatalytic function and Au NP-based solar-driven plasmonic evaporation. With the integration of these two functions into a single membrane, both the purification of contaminated water through photocatalytic degradation and the generation of clean water through evaporation were demonstrated using simulated solar illumination. Such a demonstration should also help open up a new strategy for maximizing solar energy conversion and utilization.

  11. Single flexible nanofiber to achieve simultaneous photoluminescence-electrical conductivity bifunctionality.

    Science.gov (United States)

    Sheng, Shujuan; Ma, Qianli; Dong, Xiangting; Lv, Nan; Wang, Jinxian; Yu, Wensheng; Liu, Guixia

    2015-02-01

    In order to develop new-type multifunctional composite nanofibers, Eu(BA)3 phen/PANI/PVP bifunctional composite nanofibers with simultaneous photoluminescence and electrical conductivity have been successfully fabricated via electrospinning technology. Polyvinyl pyrrolidone (PVP) is used as a matrix to construct composite nanofibers containing different amounts of Eu(BA)3 phen and polyaniline (PANI). X-Ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), fluorescence spectroscopy and a Hall effect measurement system are used to characterize the morphology and properties of the composite nanofibers. The results indicate that the bifunctional composite nanofibers simultaneously possess excellent photoluminescence and electrical conductivity. Fluorescence emission peaks of Eu(3+) ions are observed in the Eu(BA)3 phen/PANI/PVP photoluminescence-electrical conductivity bifunctional composite nanofibers. The electrical conductivity reaches up to the order of 10(-3)  S/cm. The luminescent intensity and electrical conductivity of the composite nanofibers can be tuned by adjusting the amounts of Eu(BA)3 phen and PANI. The obtained photoluminescence-electrical conductivity bifunctional composite nanofibers are expected to possess many potential applications in areas such as microwave absorption, molecular electronics, biomedicine and future nanomechanics. More importantly, the design concept and construction technique are of universal significance to fabricate other bifunctional one-dimensional naonomaterials.

  12. Novel Polyamide Proton Exchange Membranes with Bi-Functional Sulfonimide Bridges for Fuel Cell Applications

    International Nuclear Information System (INIS)

    Graphical abstract: A polymer proton conductor crosslinked with bi-functional sulfonamide bridges is synthesized for PEM fuel cell applications. The architecture simultaneously enhances mechanical strength and improves water retention of the PEMs. With an appropriate degree of crosslinking, the bi-functional PEM exhibits comparable performance to that of a commercial Nafion membrane tested in a direct methanol fuel cell. - Abstract: We design and successfully synthesize non-fluorinated polyamides with controlled crosslinking using sulfonimide as a bi-functional linker to interconnect polymer backbones and as a bridge for proton conduction. We show that the bi-functional linkers are highly beneficial not only for mechanical enforcement of the proton exchange membranes but also for enhancement of water retention capacity. With an appropriate degree of crosslinking, higher water retention capacity than that of commercial Nafion membranes can be obtained. The maximum proton conductivity of the membranes is found to be as high as 0.139 S cm−1 at 80 °C, almost the same as that of a Nafion 117 membrane. Excellent performance with the bi-functional polymer membranes in an air-breathing direct methanol fuel cell prototype, comparable to the performance of a Nafion 117 membrane, is demonstrated

  13. Palladium catalysed asymmetric alkylation of benzophenone Schiff base glycine esters in ionic liquids

    Indian Academy of Sciences (India)

    Dae Hyun Kim; Jin Kyu Im; Dae Won Kim; Minserk Cheong; Hoon Sik Kim; Deb Kumar Mukherjee

    2011-07-01

    Asymmetric alkyl substitution of various benzophenone Schiff base substrates under biphasic conditions proceeded using optically active Palladium(II) complexes. The corresponding products were obtained in high yields but with moderate enantiomeric excess (ee). Addition of specific ionic liquids to the reaction medium enhanced reactivity and selectivity for phase transfer catalytic (PTC) glycine alkylation. It has been found that there is an anionic influence of the ionic liquids that modify the steric environment around the enolate ion. A computer-assisted molecular design of enantioselective phase-transfer catalysis with the palladium complex and the ionic liquid has been done.

  14. A Promiscuous De Novo Retro-Aldolase Catalyzes Asymmetric Michael Additions via Schiff Base Intermediates.

    Science.gov (United States)

    Garrabou, Xavier; Beck, Tobias; Hilvert, Donald

    2015-05-01

    Recent advances in computational design have enabled the development of primitive enzymes for a range of mechanistically distinct reactions. Here we show that the rudimentary active sites of these catalysts can give rise to useful chemical promiscuity. Specifically, RA95.5-8, designed and evolved as a retro-aldolase, also promotes asymmetric Michael additions of carbanions to unsaturated ketones with high rates and selectivities. The reactions proceed by amine catalysis, as indicated by mutagenesis and X-ray data. The inherent flexibility and tunability of this catalyst should make it a versatile platform for further optimization and/or mechanistic diversification by directed evolution. PMID:25777153

  15. Bimetallic redox synergy in oxidative palladium catalysis.

    Science.gov (United States)

    Powers, David C; Ritter, Tobias

    2012-06-19

    Polynuclear transition metal complexes, which are embedded in the active sites of many metalloenzymes, are responsible for effecting a diverse array of oxidation reactions in nature. The range of chemical transformations remains unparalleled in the laboratory. With few noteworthy exceptions, chemists have primarily focused on mononuclear transition metal complexes in developing homogeneous catalysis. Our group is interested in the development of carbon-heteroatom bond-forming reactions, with a particular focus on identifying reactions that can be applied to the synthesis of complex molecules. In this context, we have hypothesized that bimetallic redox chemistry, in which two metals participate synergistically, may lower the activation barriers to redox transformations relevant to catalysis. In this Account, we discuss redox chemistry of binuclear Pd complexes and examine the role of binuclear intermediates in Pd-catalyzed oxidation reactions. Stoichiometric organometallic studies of the oxidation of binuclear Pd(II) complexes to binuclear Pd(III) complexes and subsequent C-X reductive elimination from the resulting binuclear Pd(III) complexes have confirmed the viability of C-X bond-forming reactions mediated by binuclear Pd(III) complexes. Metal-metal bond formation, which proceeds concurrently with oxidation of binuclear Pd(II) complexes, can lower the activation barrier for oxidation. We also discuss experimental and theoretical work that suggests that C-X reductive elimination is also facilitated by redox cooperation of both metals during reductive elimination. The effect of ligand modification on the structure and reactivity of binuclear Pd(III) complexes will be presented in light of the impact that ligand structure can exert on the structure and reactivity of binuclear Pd(III) complexes. Historically, oxidation reactions similar to those discussed here have been proposed to proceed via mononuclear Pd(IV) intermediates, and the hypothesis of mononuclear Pd

  16. Mechanish of dTTP Inhibition of the Bifunctional dCTP Deaminase:dUTPase Encoded by Mycobacterium tuberculosis

    DEFF Research Database (Denmark)

    Helt, Signe Smedegaard; Thymark, Majbritt; Harris, Pernille;

    2008-01-01

    Recombinant deoxycytidine triphosphate (dCTP) deaminase from Mycobacterium tuberculosis was produced in Escherichia coli and purified. The enzyme proved to be a bifunctional dCTP deaminase:deoxyuridine triphosphatase. As such, the M. tuberculosis enzyme is the second bifunctional enzyme to be cha...

  17. Laccase-mediated oxidation of small organics: bifunctional roles for versatile applications.

    Science.gov (United States)

    Jeon, Jong-Rok; Chang, Yoon-Seok

    2013-06-01

    Laccases have been widely used in several biotechnological areas, including organic synthesis, bioremediation, and pulp/textile bleaching. In most applications, the enzymatic actions start with single-electron oxidation of small organics followed by formation of the corresponding radicals. These radicals are subsequently involved in either oxidative coupling (i.e., bond formation) or bond cleavage of target organics. These bifunctional actions--catabolic versus anabolic--are readily identifiable in in vivo metabolic processes involving laccases. Here, we characterize the bifunctionality of laccase-mediated oxidation of small organics and present the view that knowledge of the biological functions of these metabolic processes in vivo can illuminate potential biotechnological applications of this bifunctionality.

  18. Nickel sulfide microsphere film on Ni foam as an efficient bifunctional electrocatalyst for overall water splitting.

    Science.gov (United States)

    Zhu, Wenxin; Yue, Xiaoyue; Zhang, Wentao; Yu, Shaoxuan; Zhang, Yuhuan; Wang, Jing; Wang, Jianlong

    2016-01-25

    Developing low-cost, efficient, and bifunctional electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is an appealing yet challenging task. Herein, for the first time, a NiS microsphere film was grown in situ on Ni foam (NiS/Ni foam) via a sulfurization reaction as an efficient bifunctional electrocatalyst for overall water splitting with superior activity and good durability. This NiS/Ni foam electrode delivers 20 mA cm(-2) at an overpotential of 158 mV for the HER and 50 mA cm(-2) at an overpotential of 335 mV for the OER in 1.0 M KOH. This bifunctional electrode also enables a high-efficiency alkaline water electrolyzer with 10 mA cm(-2) at a cell voltage of only 1.64 V, which could be promising in water splitting devices for large-scale hydrogen production. PMID:26661579

  19. Polymer-Supported Reagents: The Role of Bifunctionality in the Design of Ion-Selective Complexants

    Energy Technology Data Exchange (ETDEWEB)

    Alexandratos, S. D.

    2001-06-01

    The importance of multi-functionality in the preparation of ion-selective polymers is evident from the structure of enzymes where specific metal ions are bound through cooperative interactions among different amino acids. In synthetic polymers, ionic selectivity is enhanced when a chemical reaction is superimposed on an ion-exchange process. The concept of reactive ion exchange has been extended through the synthesis of crosslinked polymers whose metal ion selectivity is a function of reduction, coordination or precipitation reactions as determined by various covalently bound ligands. Development of three classes of dual mechanism bifunctional polymers, a new series of bifunctional diphosphonate polymers, and novel bifunctional ion-selective polymers with enhanced ionic accessibility has been accomplished.

  20. Electrochemical Investigation of Interaction between a Bifunctional Probe and GG Mismatch Duplex.

    Science.gov (United States)

    Li, Jiao; He, Hanping; Peng, Xiaoqian; Huang, Min; Zhang, Xiuhua; Wang, Shengfu

    2015-01-01

    A bifunctional probe (FecNC), containing a recognition part and an electrochemical active center, was applied to electrochemical detection of GG mismatch duplexes. The preparation of gold electrodes modified by mismatch and complementatry duplexes was characterized by electrochemical impedance spectroscopy (EIS) and optimized for better detection in terms of self-assembly time, hybridization time, and incubation time. The interaction between FecNC and DNA duplexes modified on the surface of a gold electrode was explored by square wave voltammetry (SWV) and EIS. The results showed that the DNA duplexes with GG mismatch on the surface of a gold electrode was easily detected by the largest electrochemical signal of the bifunctional probe because of its selective binding to GG mismatches. The bifunctional probe could offer a simple, effective electrochemical detection of GG mismatches, and theoretical bases for development of electrochemical biosensors. Further, the method would be favorable for diagnosis of genetic diseases.

  1. Tandem Catalysis Utilizing Olefin Metathesis Reactions.

    Science.gov (United States)

    Zieliński, Grzegorz K; Grela, Karol

    2016-07-01

    Since olefin metathesis transformation has become a favored synthetic tool in organic synthesis, more and more distinct non-metathetical reactions of alkylidene ruthenium complexes have been developed. Depending on the conditions applied, the same olefin metathesis catalysts can efficiently promote isomerization reactions, hydrogenation of C=C double bonds, oxidation reactions, and many others. Importantly, these transformations can be carried out in tandem with olefin metathesis reactions. Through addition of one portion of a catalyst, a tandem process provides structurally advanced products from relatively simple substrates without the need for isolation of the intermediates. These aspects not only make tandem catalysis very attractive from a practical point of view, but also open new avenues in (retro)synthetic planning. However, in the literature, the term "tandem process" is sometimes used improperly to describe other types of multi-reaction sequences. In this Concept, a number of examples of tandem catalysis involving olefin metathesis are discussed with an emphasis on their synthetic value.

  2. Inverse magnetic catalysis in dense holographic matter

    CERN Document Server

    Preis, Florian; Schmitt, Andreas

    2010-01-01

    We study the chiral phase transition in a magnetic field at finite temperature and chemical potential within the Sakai-Sugimoto model, a holographic top-down approach to (large-N_c) QCD. We consider the limit of a small separation of the flavor D8-branes, which corresponds to a dual field theory comparable to a Nambu-Jona Lasinio (NJL) model. Mapping out the surface of the chiral phase transition in the parameter space of magnetic field strength, quark chemical potential, and temperature, we find that for small temperatures the addition of a magnetic field decreases the critical chemical potential for chiral symmetry restoration - in contrast to the case of vanishing chemical potential where, in accordance with the familiar phenomenon of magnetic catalysis, the magnetic field favors the chirally broken phase. This "inverse magnetic catalysis" (IMC) appears to be associated with a previously found magnetic phase transition within the chirally symmetric phase that shows an intriguing similarity to a transition ...

  3. ELECTROCHEMICAL PROMOTED CATALYSIS: TOWARDS PRACTICAL UTILIZATION

    Directory of Open Access Journals (Sweden)

    DIMITRIOS TSIPLAKIDES

    2008-07-01

    Full Text Available Electrochemical promotion (EP of catalysis has already been recognized as “a valuable development in catalytic research” (J. Pritchard, 1990 and as “one of the most remarkable advances in electrochemistry since 1950” (J. O’M. Bockris, 1996. Laboratory studies have clearly elucidated the phenomenology of electrochemical promotion and have proven that EP is a general phenomenon at the interface of catalysis and electrochemistry. The major progress toward practical utilization of EP is surveyed in this paper. The focus is given on the electropromotion of industrial ammonia synthesis catalyst, the bipolar EP and the development of a novel monolithic electropromoted reactor (MEPR in conjunction with the electropromotion of thin sputtered metal films. Future perspectives of electrochemical promotion applications in the field of hydrogen technologies are discussed.

  4. Transition metal catalysis in confined spaces.

    Science.gov (United States)

    Leenders, Stefan H A M; Gramage-Doria, Rafael; de Bruin, Bas; Reek, Joost N H

    2015-01-21

    Transition metal catalysis plays an important role in both industry and in academia where selectivity, activity and stability are crucial parameters to control. Next to changing the structure of the ligand, introducing a confined space as a second coordination sphere around a metal catalyst has recently been shown to be a viable method to induce new selectivity and activity in transition metal catalysis. In this review we focus on supramolecular strategies to encapsulate transition metal complexes with the aim of controlling the selectivity via the second coordination sphere. As we will discuss, catalyst confinement can result in selective processes that are impossible or difficult to achieve by traditional methods. We will describe the template-ligand approach as well as the host-guest approach to arrive at such supramolecular systems and discuss how the performance of the catalyst is enhanced by confining it in a molecular container.

  5. Asymmetric distances for binary embeddings.

    Science.gov (United States)

    Gordo, Albert; Perronnin, Florent; Gong, Yunchao; Lazebnik, Svetlana

    2014-01-01

    In large-scale query-by-example retrieval, embedding image signatures in a binary space offers two benefits: data compression and search efficiency. While most embedding algorithms binarize both query and database signatures, it has been noted that this is not strictly a requirement. Indeed, asymmetric schemes that binarize the database signatures but not the query still enjoy the same two benefits but may provide superior accuracy. In this work, we propose two general asymmetric distances that are applicable to a wide variety of embedding techniques including locality sensitive hashing (LSH), locality sensitive binary codes (LSBC), spectral hashing (SH), PCA embedding (PCAE), PCAE with random rotations (PCAE-RR), and PCAE with iterative quantization (PCAE-ITQ). We experiment on four public benchmarks containing up to 1M images and show that the proposed asymmetric distances consistently lead to large improvements over the symmetric Hamming distance for all binary embedding techniques.

  6. Heterogeneous Catalysis on a Disordered Surface

    OpenAIRE

    Frachebourg, L.; Krapivsky, P. L.; Redner, S.

    1995-01-01

    We introduce a simple model of heterogeneous catalysis on a disordered surface which consists of two types of randomly distributed sites with different adsorption rates. Disorder can create a reactive steady state in situations where the same model on a homogeneous surface exhibits trivial kinetics with no steady state. A rich variety of kinetic behaviors occur for the adsorbate concentrations and catalytic reaction rate as a function of model parameters.

  7. Kinetics of Catalysis with Surface Disorder

    OpenAIRE

    Head, DA; Rodgers, GJ

    1996-01-01

    We study the effects of generalised surface disorder on the monomer-monomer model of heterogeneous catalysis, where disorder is implemented by allowing different adsorption rates for each lattice site. By mapping the system in the reaction-controlled limit onto a kinetic Ising model, we derive the rate equations for the one and two-spin correlation functions. There is good agreement between these equations and numerical simulations. We then study the inclusion of desorption of monomers from t...

  8. Application of scanning electron microscopy in catalysis

    OpenAIRE

    Lomić Gizela A.; Kiš Erne E.; Bošković Goran C.; Marinković-Nedučin Radmila P.

    2004-01-01

    A short survey of various information obtained by scanning electron microscopy (SEM) in the investigation of heterogeneous catalysts and nano-structured materials have been presented. The capabilities of SEM analysis and its application in testing catalysts in different fields of heterogeneous catalysis are illustrated. The results encompass the proper way of catalyst preparation, the mechanism of catalyst active sites formation catalysts changes and catalyst degradation during their applicat...

  9. USD Catalysis Group for Alternative Energy

    Energy Technology Data Exchange (ETDEWEB)

    Hoefelmeyer, James D.; Koodali, Ranjit; Sereda, Grigoriy; Engebretson, Dan; Fong, Hao; Puszynski, Jan; Shende, Rajesh; Ahrenkiel, Phil

    2012-03-13

    The South Dakota Catalysis Group (SDCG) is a collaborative project with mission to develop advanced catalysts for energy conversion with two primary goals: (1) develop photocatalytic systems in which polyfunctionalized TiO2 are the basis for hydrogen/oxygen synthesis from water and sunlight (solar fuels group), (2) develop new materials for hydrogen utilization in fuel cells (fuel cell group). In tandem, these technologies complete a closed chemical cycle with zero emissions.

  10. Bimetallic Redox Synergy in Oxidative Palladium Catalysis

    OpenAIRE

    Powers, David Charles; Ritter, Tobias

    2012-01-01

    Polynuclear transition metal complexes, which are embedded in the active sites of many metalloenzymes, are responsible for effecting a diverse array of oxidation reactions in nature. The range of chemical transformations remains unparalleled in the laboratory. With few noteworthy exceptions, chemists have primarily focused on mononuclear transition metal complexes in developing homogeneous catalysis. Our group is interested in the development of carbon–heteroatom bond-forming reactions, wi...

  11. Spatially Assisted Schwinger Mechanism and Magnetic Catalysis

    CERN Document Server

    Copinger, Patrick

    2016-01-01

    Using the worldline formalism we compute an effective action for fermions under a temporally modulated electric field and a spatially modulated magnetic field. It is known that the former leads to an enhanced Schwinger Mechanism, while we find that the latter can also result in enhanced particle production and even cause a reorganization of the vacuum to acquire a larger dynamical mass in equilibrium which spatially assists the Magnetic Catalysis.

  12. Nanoscale Advances in Catalysis and Energy Applications

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yimin; Somorjai, Gabor A.

    2010-05-12

    In this perspective, we present an overview of nanoscience applications in catalysis, energy conversion, and energy conservation technologies. We discuss how novel physical and chemical properties of nanomaterials can be applied and engineered to meet the advanced material requirements in the new generation of chemical and energy conversion devices. We highlight some of the latest advances in these nanotechnologies and provide an outlook at the major challenges for further developments.

  13. Catalysis in micellar and macromoleular systems

    CERN Document Server

    Fendler, Janos

    1975-01-01

    Catalysis in Micellar and Macromolecular Systems provides a comprehensive monograph on the catalyses elicited by aqueous and nonaqueous micelles, synthetic and naturally occurring polymers, and phase-transfer catalysts. It delineates the principles involved in designing appropriate catalytic systems throughout. Additionally, an attempt has been made to tabulate the available data exhaustively. The book discusses the preparation and purification of surfactants; the physical and chemical properties of surfactants and micelles; solubilization in aqueous micellar systems; and the principles of

  14. Synthesis, characterization and catalytic activity of acid-base bifunctional materials through protection of amino groups

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Yanqiu [College of Chemistry, Jilin University, Changchun 130023 (China); College of Chemistry, Mudanjiang Normal University, Mudanjiang 157012 (China); Liu, Heng; Yu, Xiaofang [College of Chemistry, Jilin University, Changchun 130023 (China); Guan, Jingqi, E-mail: guanjq@jlu.edu.cn [College of Chemistry, Jilin University, Changchun 130023 (China); Kan, Qiubin, E-mail: qkan@mail.jlu.edu.cn [College of Chemistry, Jilin University, Changchun 130023 (China)

    2012-03-15

    Graphical abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. Highlights: Black-Right-Pointing-Pointer The acid-base bifunctional material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized through protection of amino groups. Black-Right-Pointing-Pointer The obtained bifunctional material was tested for aldol condensation. Black-Right-Pointing-Pointer The SO{sub 3}H-SBA-15-NH{sub 2} catalyst containing amine and sulfonic acid groups exhibited excellent acid-basic properties. -- Abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. X-ray diffraction (XRD), N{sub 2} adsorption-desorption, transmission electron micrographs (TEM), back titration, {sup 13}C magic-angle spinning (MAS) NMR and {sup 29}Si magic-angle spinning (MAS) NMR were employed to characterize the synthesized materials. The obtained bifunctional material was tested for aldol condensation reaction between acetone and 4-nitrobenzaldehyde. Compared with monofunctional catalysts of SO{sub 3}H-SBA-15 and SBA-15-NH{sub 2}, the bifunctional sample of SO{sub 3}H-SBA-15-NH{sub 2} containing amine and sulfonic acid groups exhibited excellent acid-basic properties, which make it possess high activity for the aldol condensation.

  15. Computational approaches to homogeneous gold catalysis.

    Science.gov (United States)

    Faza, Olalla Nieto; López, Carlos Silva

    2015-01-01

    Homogenous gold catalysis has been exploding for the last decade at an outstanding pace. The best described reactivity of Au(I) and Au(III) species is based on gold's properties as a soft Lewis acid, but new reactivity patterns have recently emerged which further expand the range of transformations achievable using gold catalysis, with examples of dual gold activation, hydrogenation reactions, or Au(I)/Au(III) catalytic cycles.In this scenario, to develop fully all these new possibilities, the use of computational tools to understand at an atomistic level of detail the complete role of gold as a catalyst is unavoidable. In this work we aim to provide a comprehensive review of the available benchmark works on methodological options to study homogenous gold catalysis in the hope that this effort can help guide the choice of method in future mechanistic studies involving gold complexes. This is relevant because a representative number of current mechanistic studies still use methods which have been reported as inappropriate and dangerously inaccurate for this chemistry.Together with this, we describe a number of recent mechanistic studies where computational chemistry has provided relevant insights into non-conventional reaction paths, unexpected selectivities or novel reactivity, which illustrate the complexity behind gold-mediated organic chemistry.

  16. Hybrid Amyloid Membranes for Continuous Flow Catalysis.

    Science.gov (United States)

    Bolisetty, Sreenath; Arcari, Mario; Adamcik, Jozef; Mezzenga, Raffaele

    2015-12-29

    Amyloid fibrils are promising nanomaterials for technological applications such as biosensors, tissue engineering, drug delivery, and optoelectronics. Here we show that amyloid-metal nanoparticle hybrids can be used both as efficient active materials for wet catalysis and as membranes for continuous flow catalysis applications. Initially, amyloid fibrils generated in vitro from the nontoxic β-lactoglobulin protein act as templates for the synthesis of gold and palladium metal nanoparticles from salt precursors. The resulting hybrids possess catalytic features as demonstrated by evaluating their activity in a model catalytic reaction in water, e.g., the reduction of 4-nitrophenol into 4-aminophenol, with the rate constant of the reduction increasing with the concentration of amyloid-nanoparticle hybrids. Importantly, the same nanoparticles adsorbed onto fibrils surface show improved catalytic efficiency compared to the same unattached particles, pointing at the important role played by the amyloid fibril templates. Then, filter membranes are prepared from the metal nanoparticle-decorated amyloid fibrils by vacuum filtration. The resulting membranes serve as efficient flow catalysis active materials, with a complete catalytic conversion achieved within a single flow passage of a feeding solution through the membrane.

  17. Shape-controlled nanostructures in heterogeneous catalysis.

    Science.gov (United States)

    Zaera, Francisco

    2013-10-01

    Nanotechnologies have provided new methods for the preparation of nanomaterials with well-defined sizes and shapes, and many of those procedures have been recently implemented for applications in heterogeneous catalysis. The control of nanoparticle shape in particular offers the promise of a better definition of catalytic activity and selectivity through the optimization of the structure of the catalytic active site. This extension of new nanoparticle synthetic procedures to catalysis is in its early stages, but has shown some promising leads already. Here, we survey the major issues associated with this nanotechnology-catalysis synergy. First, we discuss new possibilities associated with distinguishing between the effects originating from nanoparticle size versus those originating from nanoparticle shape. Next, we survey the information available to date on the use of well-shaped metal and non-metal nanoparticles as active phases to control the surface atom ensembles that define the catalytic site in different catalytic applications. We follow with a brief review of the use of well-defined porous materials for the control of the shape of the space around that catalytic site. A specific example is provided to illustrate how new selective catalysts based on shape-defined nanoparticles can be designed from first principles by using fundamental mechanistic information on the reaction of interest obtained from surface-science experiments and quantum-mechanics calculations. Finally, we conclude with some thoughts on the state of the field in terms of the advances already made, the future potentials, and the possible limitations to be overcome.

  18. Plasma Catalysis: Synergistic Effects at the Nanoscale.

    Science.gov (United States)

    Neyts, Erik C; Ostrikov, Kostya Ken; Sunkara, Mahendra K; Bogaerts, Annemie

    2015-12-23

    Thermal-catalytic gas processing is integral to many current industrial processes. Ever-increasing demands on conversion and energy efficiencies are a strong driving force for the development of alternative approaches. Similarly, synthesis of several functional materials (such as nanowires and nanotubes) demands special processing conditions. Plasma catalysis provides such an alternative, where the catalytic process is complemented by the use of plasmas that activate the source gas. This combination is often observed to result in a synergy between plasma and catalyst. This Review introduces the current state-of-the-art in plasma catalysis, including numerous examples where plasma catalysis has demonstrated its benefits or shows future potential, including CO2 conversion, hydrocarbon reforming, synthesis of nanomaterials, ammonia production, and abatement of toxic waste gases. The underlying mechanisms governing these applications, as resulting from the interaction between the plasma and the catalyst, render the process highly complex, and little is known about the factors leading to the often-observed synergy. This Review critically examines the catalytic mechanisms relevant to each specific application. PMID:26619209

  19. Reaction Current Phenomenon in Bifunctional Catalytic Metal-Semiconductor Nanostructures

    Science.gov (United States)

    Hashemian, Mohammad Amin

    Energy transfer processes accompany every elementary step of catalytic chemical processes on material surface including molecular adsorption and dissociation on atoms, interactions between intermediates, and desorption of reaction products from the catalyst surface. Therefore, detailed understanding of these processes on the molecular level is of great fundamental and practical interest in energy-related applications of nanomaterials. Two main mechanisms of energy transfer from adsorbed particles to a surface are known: (i) adiabatic via excitation of quantized lattice vibrations (phonons) and (ii) non-adiabatic via electronic excitations (electron/hole pairs). Electronic excitations play a key role in nanocatalysis, and it was recently shown that they can be efficiently detected and studied using Schottky-type catalytic nanostructures in the form of measureable electrical currents (chemicurrents) in an external electrical circuit. These nanostructures typically contain an electrically continuous nanocathode layers made of a catalytic metal deposited on a semiconductor substrate. The goal of this research is to study the direct observations of hot electron currents (chemicurrents) in catalytic Schottky structures, using a continuous mesh-like Pt nanofilm grown onto a mesoporous TiO2 substrate. Such devices showed qualitatively different and more diverse signal properties, compared to the earlier devices using smooth substrates, which could only be explained on the basis of bifunctionality. In particular, it was necessary to suggest that different stages of the reaction are occurring on both phases of the catalytic structure. Analysis of the signal behavior also led to discovery of a formerly unknown (very slow) mode of the oxyhydrogen reaction on the Pt/TiO2(por) system occurring at room temperature. This slow mode was producing surprisingly large stationary chemicurrents in the range 10--50 microA/cm2. Results of the chemicurrent measurements for the bifunctional

  20. Asymmetric Synthesis via Chiral Aziridines

    DEFF Research Database (Denmark)

    Tanner, David Ackland; Harden, Adrian; Wyatt, Paul;

    1996-01-01

    A series of chiral bis(aziridines) has been synthesised and evaluated as chelating ligands for a variety of asymmetric transformations mediated by metals [Os (dihydroxylation), Pd (allylic alkylation) Cu (cyclopropanation and aziridination, Li (1,2-addition of organolithiums to imines)]. In the b......A series of chiral bis(aziridines) has been synthesised and evaluated as chelating ligands for a variety of asymmetric transformations mediated by metals [Os (dihydroxylation), Pd (allylic alkylation) Cu (cyclopropanation and aziridination, Li (1,2-addition of organolithiums to imines...

  1. Ideal 3D asymmetric concentrator

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Botella, Angel [Departamento Fisica Aplicada a los Recursos Naturales, Universidad Politecnica de Madrid, E.T.S.I. de Montes, Ciudad Universitaria s/n, 28040 Madrid (Spain); Fernandez-Balbuena, Antonio Alvarez; Vazquez, Daniel; Bernabeu, Eusebio [Departamento de Optica, Universidad Complutense de Madrid, Fac. CC. Fisicas, Ciudad Universitaria s/n, 28040 Madrid (Spain)

    2009-01-15

    Nonimaging optics is a field devoted to the design of optical components for applications such as solar concentration or illumination. In this field, many different techniques have been used for producing reflective and refractive optical devices, including reverse engineering techniques. In this paper we apply photometric field theory and elliptic ray bundles method to study 3D asymmetric - without rotational or translational symmetry - concentrators, which can be useful components for nontracking solar applications. We study the one-sheet hyperbolic concentrator and we demonstrate its behaviour as ideal 3D asymmetric concentrator. (author)

  2. Incompressibility of asymmetric nuclear matter

    OpenAIRE

    Chen, Lie-Wen; Cai, Bao-Jun; Shen, Chun; Ko, Che Ming; Xu, Jun; Li, Bao-An(Department of Physics and Astronomy, Texas A&M University-Commerce, Commerce, TX, 75429-3011, USA)

    2009-01-01

    The incompressibility $K_sat(\\delta)$ of isospin asymmetric nuclear matter at its saturation density. Our results show that in the expansion of $K_sat(\\delta)$ in powers of isospin asymmetry $\\delta$, i.e., $K_sat(\\delta )$=K_{0}+K_{sat,2}\\delta^{2}+K_{sat,4}\\delta^{4}+O(\\delta^{6})$, the magnitude of the 4th-order K_{sat,4} parameter is generally small. The 2nd-order K_{sat,2} parameter thus essentially characterizes the isospin dependence of the incompressibility of asymmetric nuclear matte...

  3. Forces between asymmetric polymer brushes

    OpenAIRE

    Shim, D.F.K.; Cates, M. E.

    1990-01-01

    We study the equilibrium compression of asymmetric polymer brushes grafted on flat plates, under athermal and theta solvent conditions, using a lattice self-consistent field (SCF) approach. We find that the separation d between two plates coated asymmetrically with brushes of type 1 and 2, as a function of the force F, obeys the "bisection rule", d(F) = (d1(F) + d 2(F)) /2 where d1(F)and d 2(F) are the corresponding separations for the symmetric brushes of type 1 and 2 respectively.The bisect...

  4. Research on asymmetric "Jerusalem" unit

    Institute of Scientific and Technical Information of China (English)

    Jun Lu; Jianbo Wang

    2009-01-01

    An asymmetric Jerusalem unit and the frequency selective surface(FSS)structure composed of such units are designed.The transmittance of the designed FSS structure is calculated by mode-matching method and compared with the test results.The comparison results show that the FSS center frequency of the asymmetric structure unit drifts little with the variation of the incident angles of the electromagnetic waves and keeps relatively stable.The research offers a new choice for the application of FSS under the large scanning angle of electromagnetic waves.

  5. Physical properties of bifunctional BST/LSMO nanocomposites

    International Nuclear Information System (INIS)

    We report the fabrication of bifunctional nanocomposites consisting of ferroelectric Ba0.7Sr0.3TiO3 (BST) and ferromagnetic La0.67Sr0.33MnO3 (LSMO) at different concentrations via a high-temperature solid state route. The structural, dielectric, electrical, magnetodielectric (MD), magnetoelectric (ME) and magnetic properties of BST/LSMO nanocomposites were systematically investigated over a wide range of temperatures and frequencies. The X-Ray Diffraction analyses reveal the nanocrystalline nature of the heterostructures, wherein both perovskite phases co-exist. No parasitic phases were observed. The study of the dielectric properties shows that the nanocomposites exhibit relaxor ferroelectric character, with ferroelectric-paraelectric phase transition temperatures around 287–292 K that do not follow the Curie-Weiss law. The electrical measurements indicate that ac conductivities of the nanocomposites follow the Jonscher's universal power law, with activation energies of 0.42–0.63 eV based on Arrhenius-type behavior at high temperatures. The nanocomposites exhibit well-defined ferromagnetic hysteresis loops at room temperature (RT). The MD and ME measurements at RT indicate that BST/LSMO exhibits a nonlinear ME effect at low frequencies, with a threshold near 0.5 T. The magnetocapacitance (MCp) measurements evidence a quadratic dependence on magnetic field, further confirming the multiferroic nature of BST/LSMO. The order of MCp was found to be ∼7% per Tesla. The analysis of the MCp measurements indicates that one of the BST/LSMO compositions studied can be considered as a new multiferroic compound

  6. Physical properties of bifunctional BST/LSMO nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Beltran-Huarac, Juan, E-mail: baristary26@gmail.com; Morell, Gerardo [Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, Puerto Rico 00931 (United States); Department of Physics, University of Puerto Rico, Rio Piedras Campus, San Juan, Puerto Rico 00936 (United States); Martinez, Ricardo [Department of Mathematics and Physics, University of Puerto Rico, Cayey Campus, Cayey, Puerto Rico 00737 (United States)

    2014-02-28

    We report the fabrication of bifunctional nanocomposites consisting of ferroelectric Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) and ferromagnetic La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO) at different concentrations via a high-temperature solid state route. The structural, dielectric, electrical, magnetodielectric (MD), magnetoelectric (ME) and magnetic properties of BST/LSMO nanocomposites were systematically investigated over a wide range of temperatures and frequencies. The X-Ray Diffraction analyses reveal the nanocrystalline nature of the heterostructures, wherein both perovskite phases co-exist. No parasitic phases were observed. The study of the dielectric properties shows that the nanocomposites exhibit relaxor ferroelectric character, with ferroelectric-paraelectric phase transition temperatures around 287–292 K that do not follow the Curie-Weiss law. The electrical measurements indicate that ac conductivities of the nanocomposites follow the Jonscher's universal power law, with activation energies of 0.42–0.63 eV based on Arrhenius-type behavior at high temperatures. The nanocomposites exhibit well-defined ferromagnetic hysteresis loops at room temperature (RT). The MD and ME measurements at RT indicate that BST/LSMO exhibits a nonlinear ME effect at low frequencies, with a threshold near 0.5 T. The magnetocapacitance (MC{sub p}) measurements evidence a quadratic dependence on magnetic field, further confirming the multiferroic nature of BST/LSMO. The order of MC{sub p} was found to be ∼7% per Tesla. The analysis of the MC{sub p} measurements indicates that one of the BST/LSMO compositions studied can be considered as a new multiferroic compound.

  7. Monodisperse Magneto-Fluorescent Bifunctional Nanoprobes for Bioapplications

    Science.gov (United States)

    Zhang, Hongwang; Huang, Heng; Pralle, Arnd; Zeng, Hao

    2013-03-01

    We present the work on the synthesis of dye-doped monodisperse Fe/SiO2 core/shell nanoparticles as bifunctional probes for bioapplications. Magnetic nanoparticles (NP) have been widely studied as nano-probes for bio-imaging, sensing as well as for cancer therapy. Among all the NPs, Fe NPs have been the focus because they have very high magnetization. However, Fe NPs are usually not stable in ambient due to the fast surface oxidation of the NPs. On the other hand, dye molecules have long been used as probes for bio-imaging. But they are sensitive to environmental conditions. It requires passivation for both so that they can be stable for applications. In this work, monodisperse Fe NPs with sizes ranging from 13-20 nm have been synthesized through the chemical thermal-decomposition in a solution. Silica shells were then coated on the Fe NPs by a two-phase oil-in-water method. Dye molecules were first bonded to a silica precursor and then encapsulated into the silica shell during the coating process. The silica shells protect both the Fe NPs and dye molecules, which makes them as robust probes. The dye doped Fe/SiO2 core/shell NPs remain both highly magnetic and highly fluorescent. The stable dye doped Fe/SiO2NPs have been used as a dual functional probe for both magnetic heating and local nanoscale temperature sending, and their performance will be reported. Research supported by NSF DMR 0547036, DMR1104994.

  8. Janus nanobelts: fabrication, structure and enhanced magnetic-fluorescent bifunctional performance

    Science.gov (United States)

    Ma, Qianli; Yu, Wensheng; Dong, Xiangting; Wang, Jinxian; Liu, Guixia

    2014-02-01

    A new nanostructure of magnetic-fluorescent bifunctional Janus nanobelts with Fe3O4/PMMA as one half and Tb(BA)3phen/PMMA as the other half has been successfully fabricated by a specially designed parallel spinneret electrospinning technology. The morphology and properties of the final products were investigated in detail by X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), biological microscopy (BM), vibrating sample magnetometry (VSM) and fluorescence spectroscopy. The results revealed that the [Fe3O4/PMMA]//[Tb(BA)3phen/PMMA] magnetic-fluorescent bifunctional Janus nanobelts possess superior magnetic and fluorescent properties due to their special nanostructure. Compared with Fe3O4/Tb(BA)3phen/PMMA composite nanobelts, the magnetic-fluorescent bifunctional Janus nanobelts provided better performance. The new magnetic-fluorescent bifunctional Janus nanobelts have potential applications in novel nano-bio-label materials, drug target delivery materials and future nanodevices due to their excellent magnetic-fluorescent properties, flexibility and insolubility. Moreover, the construction technique for the Janus nanobelts is of universal significance for the fabrication of other multifunctional Janus nanobelts.A new nanostructure of magnetic-fluorescent bifunctional Janus nanobelts with Fe3O4/PMMA as one half and Tb(BA)3phen/PMMA as the other half has been successfully fabricated by a specially designed parallel spinneret electrospinning technology. The morphology and properties of the final products were investigated in detail by X-ray diffractometry (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), biological microscopy (BM), vibrating sample magnetometry (VSM) and fluorescence spectroscopy. The results revealed that the [Fe3O4/PMMA]//[Tb(BA)3phen/PMMA] magnetic-fluorescent bifunctional Janus nanobelts possess superior magnetic and fluorescent properties due to their special

  9. Structural basis for bifunctional peptide recognition at human δ-opioid receptor.

    Science.gov (United States)

    Fenalti, Gustavo; Zatsepin, Nadia A; Betti, Cecilia; Giguere, Patrick; Han, Gye Won; Ishchenko, Andrii; Liu, Wei; Guillemyn, Karel; Zhang, Haitao; James, Daniel; Wang, Dingjie; Weierstall, Uwe; Spence, John C H; Boutet, Sébastien; Messerschmidt, Marc; Williams, Garth J; Gati, Cornelius; Yefanov, Oleksandr M; White, Thomas A; Oberthuer, Dominik; Metz, Markus; Yoon, Chun Hong; Barty, Anton; Chapman, Henry N; Basu, Shibom; Coe, Jesse; Conrad, Chelsie E; Fromme, Raimund; Fromme, Petra; Tourwé, Dirk; Schiller, Peter W; Roth, Bryan L; Ballet, Steven; Katritch, Vsevolod; Stevens, Raymond C; Cherezov, Vadim

    2015-03-01

    Bifunctional μ- and δ-opioid receptor (OR) ligands are potential therapeutic alternatives, with diminished side effects, to alkaloid opiate analgesics. We solved the structure of human δ-OR bound to the bifunctional δ-OR antagonist and μ-OR agonist tetrapeptide H-Dmt-Tic-Phe-Phe-NH2 (DIPP-NH2) by serial femtosecond crystallography, revealing a cis-peptide bond between H-Dmt and Tic. The observed receptor-peptide interactions are critical for understanding of the pharmacological profiles of opioid peptides and for development of improved analgesics. PMID:25686086

  10. A nanostructured bifunctional Pd/C gas-diffusion electrode for metal-air batteries

    OpenAIRE

    McKerracher, R.D.; Alegre, C.; Baglio, V.; Aricò, A.S.; Ponce de León, C.; Mornaghini, F.; Rodlert, M.; Walsh, F. C.

    2015-01-01

    Designing a bifunctional air electrode which catalyses both the oxygen reduction and oxygen evolution reactions is an essential part of progress towards fully rechargeable metal-air batteries, such as the iron-air battery which is environmentally friendly, low cost, and does not suffer risk of thermal runaway like lithium-ion batteries. This paper reports the development of a lightweight carbon-based bifunctional air electrode, catalysed by a small (0.5 mg cm?2) loading of 30 wt.% palladium o...

  11. Neutrons for Catalysis: A Workshop on Neutron Scattering Techniques for Studies in Catalysis

    International Nuclear Information System (INIS)

    This report summarizes the Workshop on Neutron Scattering Techniques for Studies in Catalysis, held at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) on September 16 and 17, 2010. The goal of the Workshop was to bring experts in heterogeneous catalysis and biocatalysis together with neutron scattering experimenters to identify ways to attack new problems, especially Grand Challenge problems in catalysis, using neutron scattering. The Workshop locale was motivated by the neutron capabilities at ORNL, including the High Flux Isotope Reactor (HFIR) and the new and developing instrumentation at the SNS. Approximately 90 researchers met for 1 1/2 days with oral presentations and breakout sessions. Oral presentations were divided into five topical sessions aimed at a discussion of Grand Challenge problems in catalysis, dynamics studies, structure characterization, biocatalysis, and computational methods. Eleven internationally known invited experts spoke in these sessions. The Workshop was intended both to educate catalyst experts about the methods and possibilities of neutron methods and to educate the neutron community about the methods and scientific challenges in catalysis. Above all, it was intended to inspire new research ideas among the attendees. All attendees were asked to participate in one or more of three breakout sessions to share ideas and propose new experiments that could be performed using the ORNL neutron facilities. The Workshop was expected to lead to proposals for beam time at either the HFIR or the SNS; therefore, it was expected that each breakout session would identify a few experiments or proof-of-principle experiments and a leader who would pursue a proposal after the Workshop. Also, a refereed review article will be submitted to a prominent journal to present research and ideas illustrating the benefits and possibilities of neutron methods for catalysis research.

  12. Neutrons for Catalysis: A Workshop on Neutron Scattering Techniques for Studies in Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Overbury, Steven {Steve} H [ORNL; Coates, Leighton [ORNL; Herwig, Kenneth W [ORNL; Kidder, Michelle [ORNL

    2011-10-01

    This report summarizes the Workshop on Neutron Scattering Techniques for Studies in Catalysis, held at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) on September 16 and 17, 2010. The goal of the Workshop was to bring experts in heterogeneous catalysis and biocatalysis together with neutron scattering experimenters to identify ways to attack new problems, especially Grand Challenge problems in catalysis, using neutron scattering. The Workshop locale was motivated by the neutron capabilities at ORNL, including the High Flux Isotope Reactor (HFIR) and the new and developing instrumentation at the SNS. Approximately 90 researchers met for 1 1/2 days with oral presentations and breakout sessions. Oral presentations were divided into five topical sessions aimed at a discussion of Grand Challenge problems in catalysis, dynamics studies, structure characterization, biocatalysis, and computational methods. Eleven internationally known invited experts spoke in these sessions. The Workshop was intended both to educate catalyst experts about the methods and possibilities of neutron methods and to educate the neutron community about the methods and scientific challenges in catalysis. Above all, it was intended to inspire new research ideas among the attendees. All attendees were asked to participate in one or more of three breakout sessions to share ideas and propose new experiments that could be performed using the ORNL neutron facilities. The Workshop was expected to lead to proposals for beam time at either the HFIR or the SNS; therefore, it was expected that each breakout session would identify a few experiments or proof-of-principle experiments and a leader who would pursue a proposal after the Workshop. Also, a refereed review article will be submitted to a prominent journal to present research and ideas illustrating the benefits and possibilities of neutron methods for catalysis research.

  13. Special Issue: Coinage Metal (Copper, Silver, and Gold Catalysis

    Directory of Open Access Journals (Sweden)

    Sónia Alexandra Correia Carabineiro

    2016-06-01

    Full Text Available The subject of catalysis by coinage metals (copper, silver, and gold comes up increasingly day-by-day. This Special Issue aims to cover the numerous aspects of the use of these metals as catalysts for several reactions. It deals with synthesis and characterization of copper, silver and gold based catalysis, their characterization and use, both for heterogeneous and homogeneous catalysis, and some of their potential applications.

  14. A new era of catalysis: efficiency, value, and sustainability.

    Science.gov (United States)

    Cheng, Soofin; Lin, Shawn D

    2014-06-01

    Value proposition: Global warming and climate change urge the chemical industry to develop new processes, in which sustainability is a necessity and requirement. Catalysis is recognized to be one of the key technologies in enabling sustainability. This special issue, assembled by guest editors Soofing Chen and Shawn D. Lin, highlights some of the best work presented at "The 6th Asia-Pacific Congress on Catalysis (APCAT-6)", with as major theme "New Era of Catalysis: Efficiency, Value, and Sustainability".

  15. Magnetic catalysis and inverse magnetic catalysis in nonlocal chiral quark models

    CERN Document Server

    Pagura, V P; Noguera, S; Scoccola, N N

    2016-01-01

    We study the behavior of strongly interacting matter under an external constant magnetic field in the context of nonlocal chiral quark models within the mean field approximation. We find that at zero temperature the behavior of the quark condensates shows the expected magnetic catalysis effect, our predictions being in good quantitative agreement with lattice QCD results. On the other hand, in contrast to what happens in the standard local Nambu-Jona-Lasinio model, when the analysis is extended to the case of finite temperature our results show that nonlocal models naturally lead to the Inverse Magnetic Catalysis effect.

  16. Controllable Catalysis with Nanoparticles: Bimetallic Alloy Systems and Surface Adsorbates

    KAUST Repository

    Chen, Tianyou

    2016-05-16

    Transition metal nanoparticles are privileged materials in catalysis due to their high specific surface areas and abundance of active catalytic sites. While many of these catalysts are quite useful, we are only beginning to understand the underlying catalytic mechanisms. Opening the “black box” of nanoparticle catalysis is essential to achieve the ultimate goal of catalysis by design. In this Perspective we highlight recent work addressing the topic of controlled catalysis with bimetallic alloy and “designer” adsorbate-stabilized metal nanoparticles.

  17. Synthesis of Asymmetric Propanetriol Analogues

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    From natural tartaric acid, (R)-2-benzyloxy-3-(2-tetrahydropyranyloxy) propanol 3 was designed and synthesized, and (R)-2-benzyloxy-3-(4-methoxybenzyloxy) propanol 7 was prepared in a new method. They can be used as chiral synthons of lysophosphatidic acid and other compounds with asymmetric propanetriol backbone.

  18. Vertical asymmetric double quantum dots

    Science.gov (United States)

    Roßbach, R.; Reischle, M.; Beirne, G. J.; Schweizer, H.; Jetter, M.; Michler, P.

    2007-01-01

    Two layers of differently sized self-assembled InP-quantum dots (QDs) separated by a GaInP spacer layer with varying thickness were grown by metal organic vapor phase epitaxy (MOVPE). Photoluminescence measurements of the QD ensembles and of individual asymmetric double QDS show coupling due to the tunnelling of carriers.

  19. Asymmetrical Switch Costs in Children

    Science.gov (United States)

    Ellefson, Michelle R.; Shapiron, Laura R.; Chater, Nick

    2006-01-01

    Switching between tasks produces decreases in performance as compared to repeating the same task. Asymmetrical switch costs occur when switching between two tasks of unequal difficulty. This asymmetry occurs because the cost is greater when switching to the less difficult task than when switching to the more difficult task. Various theories about…

  20. Selfhealing of asymmetric Bessel-like modes

    DEFF Research Database (Denmark)

    Israelsen, Stine Møller; Rishøj, Lars Søgaard; Rottwitt, Karsten

    2014-01-01

    We numerically investigate asymmetric Bessel-like modes in an aircladding fiber. The selfhealing ability of asymmetric Bessel-like modes is demonstrated and quantified including the angular dependency of this ability.......We numerically investigate asymmetric Bessel-like modes in an aircladding fiber. The selfhealing ability of asymmetric Bessel-like modes is demonstrated and quantified including the angular dependency of this ability....

  1. High surface area carbon for bifunctional air electrodes applied in zinc-air batteries

    Energy Technology Data Exchange (ETDEWEB)

    Arai, H. [on leave from NTT Laboratories (Japan); Mueller, S.; Haas, O. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    Bifunctional air electrodes with high surface area carbon substrates showed low reduction overpotential, thus are promising for enhancing the energy efficiency and power capability of zinc-air batteries. The improved performance is attributed to lower overpotential due to diffusion of the reaction intermediate, namely the peroxide ion. (author) 1 fig., 2 refs.

  2. Radiation Induced Crosslinking of Polyethylene in the Presence of Bifunctional Vinyl Monomers

    DEFF Research Database (Denmark)

    Joshi, M. S.; Singer, Klaus Albert Julius; Silverman, J.

    1977-01-01

    Several reports have been published showing that the radiation induced grafting of bifunctional vinyl monomers to low density polyethylene results in a product with an unusually high density of crosslinks. The same grafting reactions are shown to reduce the incipient gel dose by more than a facto...

  3. Oxidations of amines with molecular oxygen using bifunctional gold–titania catalysts

    DEFF Research Database (Denmark)

    Klitgaard, Søren Kegnæs; Egeblad, Kresten; Mentzel, Uffe Vie;

    2008-01-01

    Over the past decades it has become clear that supported gold nanoparticles are surprisingly active and selective catalysts for several green oxidation reactions of oxygen-containing hydrocarbons using molecular oxygen as the stoichiometric oxidant. We here report that bifunctional gold–titania c...

  4. Direct catalytic transformation of carbohydrates into 5-ethoxymethylfurfural with acid–base bifunctional hybrid nanospheres

    DEFF Research Database (Denmark)

    Li, Hu; Khokarale, Santosh Govind; Kotni, Ramakrishna;

    2014-01-01

    carbohydrates. A high EMF yield of 76.6%, 58.5%, 42.4%, and 36.5% could be achieved, when fructose, inulin, sorbose, and sucrose were used as starting materials, respectively. Although, the acid–base bifunctional nanocatalysts were inert for synthesis of EMF from glucose based carbohydrates, ethyl...

  5. Direct catalytic transformation of carbohydrates into 5-ethoxymethylfurfural with acid–base bifunctional hybrid nanospheres

    International Nuclear Information System (INIS)

    Graphical abstract: Catalytic conversion of carbohydrates into HMF and EMF in ethanol/DMSO with acid–base bifunctional hybrid nanospheres prepared from self-assembly of corresponding basic amino acids and HPA. - Highlights: • Acid–base bifunctional nanospheres were efficient for production of EMF from sugars. • Synthesis of EMF in a high yield of 76.6% was realized from fructose. • Fructose based biopolymers could also be converted into EMF with good yields. • Ethyl glucopyranoside was produced in good yields from glucose in ethanol. - Abstract: A series of acid–base bifunctional hybrid nanospheres prepared from the self-assembly of basic amino acids and phosphotungstic acid (HPA) with different molar ratios were employed as efficient and recyclable catalysts for synthesis of liquid biofuel 5-ethoxymethylfurfural (EMF) from various carbohydrates. A high EMF yield of 76.6%, 58.5%, 42.4%, and 36.5% could be achieved, when fructose, inulin, sorbose, and sucrose were used as starting materials, respectively. Although, the acid–base bifunctional nanocatalysts were inert for synthesis of EMF from glucose based carbohydrates, ethyl glucopyranoside in good yields could be obtained from glucose in ethanol. Moreover, the nanocatalyst functionalized with acid and basic sites was able to be reused several times with no significant loss in catalytic activity

  6. Bifunctional catalysts for the direct production of liquid fuels from syngas

    NARCIS (Netherlands)

    Sartipi, S.

    2014-01-01

    Design and development of catalyst formulations that maximize the direct production of liquid fuels by combining Fischer-Tropsch synthesis (FTS), hydrocarbon cracking, and isomerization into one single catalyst particle (bifunctional FTS catalyst) have been investigated in this thesis. To achieve th

  7. First-Principles Study of Structure Property Relationships of Monolayer (Hydroxy)Oxide-Metal Bifunctional Electrocatalysts

    DEFF Research Database (Denmark)

    Zeng, Zhenhua; Kubal, Joseph; Greeley, Jeffrey Philip

    2015-01-01

    step towards accurate identification and prediction of a variety of oxide/electrode interfacial structure-properties relationships, but also provides the foundation for rational design and control of ‘targeted active phases’ at catalytic interfaces. The successful design of bifunctional...

  8. The Golgi localized bifunctional UDP-rhamnose/UDP-galactose transporter family of Arabidopsis

    DEFF Research Database (Denmark)

    Rautengarten, Carsten; Ebert, Berit; Moreno, Ignacio;

    2014-01-01

    that are specifically presumed to deliver the diverse array of nucleotide sugars found in plants. This study has developed a novel approach that enabled functional characterization of six bifunctional UDP-rhamnose (Rha)/UDP-galactose (Gal) transporters from Arabidopsis. An analysis of loss...

  9. Bifunctional phage-based pretargeted imaging of human prostate carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Newton-Northup, Jessica R. [Department of Biochemistry, University of Missouri, Columbia, MO 65211 (United States)], E-mail: newtonj@missouri.edu; Figueroa, Said D. [Department of Radiology, University of Missouri, Columbia, MO 65211 (United States); Quinn, Thomas P.; Deutscher, Susan L. [Department of Biochemistry, University of Missouri, Columbia, MO 65211 (United States); Research Service, Harry S. Truman Veterans Memorial Hospital, Columbia, MO 65201 (United States)

    2009-10-15

    Introduction: Two-step and three-step pretargeting systems utilizing biotinylated prostate tumor-homing bacteriophage (phage) and {sup 111}In-radiolabeled streptavidin or biotin were developed for use in cancer radioimaging. The in vivo selected prostate carcinoma-specific phage (G1) displaying up to five copies of the peptide IAGLATPGWSHWLAL was the focus of the present study. Methods: The ability of G1 phage to extravasate and target prostate tumor cells was investigated using immunohistochemistry. G1 phages were biotinylated, streptavidin was conjugated to diethylenetriaminepentaacetic acid (DTPA) and biotin was conjugated to 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA). Biodistribution studies and single-photon emission computed tomography (SPECT)/CT imaging of xenografted PC-3 tumors via two-step pretargeted {sup 111}In-labeled streptavidin and three-step pretargeted {sup 111}In-labeled biotin were performed in SCID mice to determine the optimal pretargeting method. Results: The ability of G1 phage to extravasate the vasculature and bind directly to human PC-3 prostate carcinoma tumor cells in vivo was demonstrated via immunocytochemical analysis. Comparative biodistribution studies of the two-step and three-step pretargeting strategies indicated increased PC-3 human prostate carcinoma tumor uptake in SCID mice of 4.34{+-}0.26 %ID g{sup -1} at 0.5 h postinjection of {sup 111}In-radiolabeled biotin (utilized in a three-step protocol) compared to 0.67{+-}0.06 %ID g{sup -1} at 24 h postinjection of {sup 111}In radiolabeled streptavidin (employed in a two-step protocol). In vivo SPECT/CT imaging of xenografted PC-3 tumors in SCID mice with the three-step pretargeting method was superior to that of the two-step pretargeting method, and, importantly, blocking studies demonstrated specificity of tumor uptake of {sup 111}In-labeled biotin in the three-step pretargeting scheme. Conclusion: This study demonstrates the use of multivalent bifunctional

  10. Comparison of bifunctional chelates for {sup 64}Cu antibody imaging

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Cara L.; Crisp, Sarah; Bensimon, Corinne [MDS Nordion, Vancouver, BC (Canada); Yapp, Donald T.T.; Ng, Sylvia S.W. [British Columbia Cancer Agency Research Centre, Vancouver, BC (Canada); University of British Columba, The Faculty of Pharmaceutical Sciences, Vancouver, BC (Canada); Sutherland, Brent W. [British Columbia Cancer Agency Research Centre, Vancouver, BC (Canada); Gleave, Martin [Prostate Centre at Vancouver General Hospital, Vancouver, BC (Canada); Jurek, Paul; Kiefer, Garry E. [Macrocyclics Inc., Dallas, TX (United States)

    2010-11-15

    Improved bifunctional chelates (BFCs) are needed to facilitate efficient {sup 64}Cu radiolabeling of monoclonal antibodies (mAbs) under mild conditions and to yield stable, target-specific agents. The utility of two novel BFCs, 1-Oxa-4,7,10-triazacyclododecane-5-S-(4-isothiocyanatobenzyl)-4,7,10-triacetic acid (p-SCN-Bn-Oxo-DO3A) and 3,6,9,15-tetraazabicyclo[9.3.1]pentadeca-1(15),11,13-triene-4-S-(4-isothiocyanatobenzyl)-3,6,9-triacetic acid (p-SCN-Bn-PCTA), for mAb imaging with {sup 64}Cu were compared to the commonly used S-2-(4-isothiocyanatobenzyl)-1,4,7,10-tetraazacyclododecane-tetraacetic acid (p-SCN-Bn-DOTA). The BFCs were conjugated to trastuzumab, which targets the HER2/neu receptor. {sup 64}Cu radiolabeling of the conjugates was optimized. Receptor binding was analyzed using flow cytometry and radioassays. Finally, PET imaging and biodistribution studies were done in mice bearing either HER2/neu-positive or HER2/neu-negative tumors. {sup 64}Cu-Oxo-DO3A- and PCTA-trastuzumab were prepared at room temperature in >95% radiochemical yield (RCY) in <30 min, compared to only 88% RCY after 2 h for the preparation of {sup 64}Cu-DOTA-trastuzumab under the same conditions. Cell studies confirmed that the immunoreactivity of the mAb was retained for each of the bioconjugates. In vivo studies showed that {sup 64}Cu-Oxo-DO3A- and PCTA-trastuzumab had higher uptake than the {sup 64}Cu-DOTA-trastuzumab at 24 h in HER2/neu-positive tumors, resulting in higher tumor to background ratios and better tumor images. By 40 h all three of the {sup 64}Cu-BFC-trastuzumab conjugates allowed for clear visualization of the HER2/neu-positive tumors but not the negative control tumor. The antibody conjugates of PCTA and Oxo-DO3A were shown to have superior {sup 64}Cu radiolabeling efficiency and stability compared to the analogous DOTA conjugate. In addition, {sup 64}Cu-PCTA and Oxo-DO3A antibody conjugates may facilitate earlier imaging with greater target to background ratios than

  11. Asymmetric Multilevel Diversity Coding and Asymmetric Gaussian Multiple Descriptions

    CERN Document Server

    Mohajer, Soheil; Diggavi, Suhas N

    2009-01-01

    We consider the asymmetric multilevel diversity (A-MLD) coding problem, where a set of $2^K-1$ information sources, ordered in a decreasing level of importance, is encoded into $K$ messages (or descriptions). There are $2^K-1$ decoders, each of which has access to a non-empty subset of the encoded messages. Each decoder is required to reproduce the information sources up to a certain importance level depending on the combination of descriptions available to it. We obtain a single letter characterization of the achievable rate region for the 3-description problem. In contrast to symmetric multilevel diversity coding, source-separation coding is not sufficient in the asymmetric case, and ideas akin to network coding need to be used strategically. Based on the intuitions gained in treating the A-MLD problem, we derive inner and outer bounds for the rate region of the asymmetric Gaussian multiple description (MD) problem with three descriptions. Both the inner and outer bounds have a similar geometric structure t...

  12. New strategies in chemical synthesis and catalysis

    CERN Document Server

    Pignataro, Bruno

    2012-01-01

    Providing a comprehensive overview of the essential topics, this book covers the core areas of organic, inorganic, organometallic, biochemical synthesis and catalysis.The authors are among the rising stars in European chemistry, a selection of participants in the 2010 European Young Chemists Award competition, and their contributions deal with most of the frontier issues in chemical synthesis. They give an account of the latest research results in chemistry in Europe, as well as the state of the art in their field of research and the outlook for the future.

  13. Concepts of Modern Catalysis and Kinetics

    CERN Document Server

    Chorkendorff, I

    2003-01-01

    Until now, the literature has offered a rather limited approach to the use of fundamental kinetics and their application to catalytic reactions. Subsequently, this book spans the full range from fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies to their equivalent large-scale industrial production processes. The result is key knowledge for students at technical universities and professionals already working in industry. "...such an enterprise will be of great value to the community, to professionals as well as graduate an

  14. Relativistic effects in homogeneous gold catalysis.

    Science.gov (United States)

    Gorin, David J; Toste, F Dean

    2007-03-22

    Transition-metal catalysts containing gold present new opportunities for chemical synthesis, and it is therefore not surprising that these complexes are beginning to capture the attention of the chemical community. Cationic phosphine-gold(i) complexes are especially versatile and selective catalysts for a growing number of synthetic transformations. The reactivity of these species can be understood in the context of theoretical studies on gold; relativistic effects are especially helpful in rationalizing the reaction manifolds available to gold catalysts. This Review draws on experimental and computational data to present our current understanding of homogeneous gold catalysis, focusing on previously unexplored reactivity and its application to the development of new methodology.

  15. Surface Science Foundations of Catalysis and Nanoscience

    CERN Document Server

    Kolasinski, Kurt K

    2012-01-01

    Surface science has evolved from being a sub-field of chemistry or physics, and has now established itself as an interdisciplinary topic. Knowledge has developed sufficiently that we can now understand catalysis from a surface science perspective. No-where is the underpinning nature of surface science better illustrated than with nanoscience. Now in its third edition, this successful textbook aims to provide students with an understanding of chemical transformations and the formation of structures at surfaces. The chapters build from simple to more advanced principles with each featuring exerc

  16. Modelling asymmetric growth in crowded plant communities

    DEFF Research Database (Denmark)

    Damgaard, Christian

    2010-01-01

    A class of models that may be used to quantify the effect of size-asymmetric competition in crowded plant communities by estimating a community specific degree of size-asymmetric growth for each species in the community is suggested. The model consists of two parts: an individual size-asymmetric ......A class of models that may be used to quantify the effect of size-asymmetric competition in crowded plant communities by estimating a community specific degree of size-asymmetric growth for each species in the community is suggested. The model consists of two parts: an individual size...

  17. LI Can elected president of int'l catalysis association

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Prof.LI Can,vice directorgeneral of the CAS Dalian Institute of Chemical Physics,was elected new president of the Executive Committee of the International Association for Catalysis Societies (IACS) at the 14th International Congress on Catalysis held from 13 to 18 July in Seoul,ROK.It is the first time for a Chinese scientist to serve the post.

  18. Factors Affecting the Relative Efficiency of General Acid Catalysis

    Science.gov (United States)

    Kwan, Eugene E.

    2005-01-01

    A simple framework for evaluating experimental kinetic data to provide support for Specific Acid Catalysis (SAC) and General Acid Catalysis (GAC) is described based on the factors affecting their relative efficiency. Observations reveal that increasing the SAC-to-GAC rate constant ratio reduces the effective pH range for GAC.

  19. The nature of the active site in heterogeneous metal catalysis

    DEFF Research Database (Denmark)

    Nørskov, Jens Kehlet; Bligaard, Thomas; Larsen, Britt Hvolbæk;

    2008-01-01

    This tutorial review, of relevance for the surface science and heterogeneous catalysis communities, provides a molecular-level discussion of the nature of the active sites in metal catalysis. Fundamental concepts such as "Bronsted-Evans-Polanyi relations'' and "volcano curves'' are introduced...

  20. Terahertz metamaterial with asymmetric transmission

    CERN Document Server

    Singh, R; Menzel, C; Rockstuhl, C; Azad, A K; Cheville, R A; Lederer, F; Zhang, W; Zheludev, N I

    2009-01-01

    We show for the first time that a planar metamaterial, an array of coupled metal split-ring resonators with a unit cell lacking mirror symmetry, exhibits asymmetric transmission of terahertz radiation propagating through it in opposite directions. This intriguing effect, that is compatible with Lorentz reciprocity and time-reversal, depends on a directional difference in conversion efficiency of the incident circularly polarized wave into one of opposite handedness, that is only possible in lossy low-symmetry planar chiral metamaterials. We show that asymmetric transmission is linked to excitation of enantiomerically sensitive plasmons, these are induced charge-field excitations that depend on the mutual handedness of incident wave and metamaterial pattern. Various bands of positive, negative and zero phase and group velocities have been identified indicating the opportunity to develop polarization sensitive negative index and slow light media based on such metamaterials.

  1. Stable walking with asymmetric legs

    International Nuclear Information System (INIS)

    Asymmetric leg function is often an undesired side-effect in artificial legged systems and may reflect functional deficits or variations in the mechanical construction. It can also be found in legged locomotion in humans and animals such as after an accident or in specific gait patterns. So far, it is not clear to what extent differences in the leg function of contralateral limbs can be tolerated during walking or running. Here, we address this issue using a bipedal spring-mass model for simulating walking with compliant legs. With the help of the model, we show that considerable differences between contralateral legs can be tolerated and may even provide advantages to the robustness of the system dynamics. A better understanding of the mechanisms and potential benefits of asymmetric leg operation may help to guide the development of artificial limbs or the design novel therapeutic concepts and rehabilitation strategies.

  2. Asymmetric information and macroeconomic dynamics

    Science.gov (United States)

    Hawkins, Raymond J.; Aoki, Masanao; Roy Frieden, B.

    2010-09-01

    We show how macroeconomic dynamics can be derived from asymmetric information. As an illustration of the utility of this approach we derive the equilibrium density, non-equilibrium densities and the equation of motion for the response to a demand shock for productivity in a simple economy. Novel consequences of this approach include a natural incorporation of time dependence into macroeconomics and a common information-theoretic basis for economics and other fields seeking to link micro-dynamics and macro-observables.

  3. Entrepreneurship, Asymmetric Information and Unemployment

    OpenAIRE

    Robin Boadway; Nicolas Marceau; Maurice Marchand; Marianne Vigneault

    1998-01-01

    We examine how three sources of asymmetric information affect the supply of entrepreneurs and unemployment. In the first case, banks cannot observe entrepreneurs' risk of failure so ration credit. This increases the number of entrepreneurs and the level of unemployment. In the second case, firms cannot observe workers' effort so offer a wage above the market clearing one. This results in unemployment and too few entrepreneurs. The final case arises when firms cannot observe workers' abilities...

  4. Asymmetric Microscopic Driving Behavior Theory

    OpenAIRE

    Yeo, Hwasoo

    2008-01-01

    Numerous theories on traffic have been developed as traffic congestion gains more and more interest in our daily life. To model traffic phenomena, many traffic theorists have adopted theories from other fields such as fluid mechanics and thermodynamics. However, their efforts to model the traffic at a microscopic level have not been successful yet. Therefore, to overcome the limitations of the existing theories we propose a microscopic asymmetric traffic theory based on analysis of individual...

  5. Asymmetric Wettability Directs Leidenfrost Droplets

    Energy Technology Data Exchange (ETDEWEB)

    Agapov, Rebecca L [ORNL; Boreyko, Jonathan B [ORNL; Briggs, Dayrl P [ORNL; Srijanto, Bernadeta R [ORNL; Retterer, Scott T [ORNL; Collier, Pat [ORNL; Lavrik, Nickolay V [ORNL

    2014-01-01

    Leidenfrost phenomena on nano- and microstructured surfaces are of great importance for increasing control over heat transfer in high power density systems utilizing boiling phenomena. They also provide an elegant means to direct droplet motion in a variety of recently emerging fluidic systems. Here, we report the fabrication and characterization of tilted nanopillar arrays (TNPAs) that exhibit directional Leidenfrost water droplets under dynamic conditions, namely on impact with Weber numbers 40 at T 325 C. The batch fabrication of the TNPAs was achieved by glancing-angle anisotropic reactive ion etching of a thermally dewet platinum mask, with mean pillar diameters of 100 nm and heights of 200-500 nm. In contrast to previously implemented macro- and microscopic Leidenfrost ratchets, our TNPAs induce no preferential directional movement of Leidenfrost droplets under conditions approaching steady-state film boiling, suggesting that the observed droplet directionality is not a result of asymmetric vapor flow. Using high-speed imaging, phase diagrams were constructed for the boiling behavior upon impact for droplets falling onto TNPAs, straight nanopillar arrays, and smooth silicon surfaces. The asymmetric impact and directional trajectory of droplets was exclusive to the TNPAs for impacts corresponding to the transition boiling regime, revealing that asymmetric wettability upon impact is the mechanism for the droplet directionality.

  6. Tandem Catalysis Utilizing Olefin Metathesis Reactions.

    Science.gov (United States)

    Zieliński, Grzegorz K; Grela, Karol

    2016-07-01

    Since olefin metathesis transformation has become a favored synthetic tool in organic synthesis, more and more distinct non-metathetical reactions of alkylidene ruthenium complexes have been developed. Depending on the conditions applied, the same olefin metathesis catalysts can efficiently promote isomerization reactions, hydrogenation of C=C double bonds, oxidation reactions, and many others. Importantly, these transformations can be carried out in tandem with olefin metathesis reactions. Through addition of one portion of a catalyst, a tandem process provides structurally advanced products from relatively simple substrates without the need for isolation of the intermediates. These aspects not only make tandem catalysis very attractive from a practical point of view, but also open new avenues in (retro)synthetic planning. However, in the literature, the term "tandem process" is sometimes used improperly to describe other types of multi-reaction sequences. In this Concept, a number of examples of tandem catalysis involving olefin metathesis are discussed with an emphasis on their synthetic value. PMID:27203528

  7. Mechanical catalysis on the centimetre scale.

    Science.gov (United States)

    Miyashita, Shuhei; Audretsch, Christof; Nagy, Zoltán; Füchslin, Rudolf M; Pfeifer, Rolf

    2015-03-01

    Enzymes play important roles in catalysing biochemical transaction paths, acting as logical machines through the morphology of the processes. A key challenge in elucidating the nature of these systems, and for engineering manufacturing methods inspired by biochemical reactions, is to attain a comprehensive understanding of the stereochemical ground rules of enzymatic reactions. Here, we present a model of catalysis that can be performed magnetically by centimetre-sized passive floating units. The designed system, which is equipped with permanent magnets only, passively obeys the local causalities imposed by magnetic interactions, albeit it shows a spatial behaviour and an energy profile analogous to those of biochemical enzymes. In this process, the enzyme units trigger physical conformation changes of the target by levelling out the magnetic potential barrier (activation potential) to a funnel type and, thus, induce cascading conformation changes of the targeted substrate units reacting in parallel. The inhibitor units, conversely, suppress such changes by increasing the potential. Because the model is purely mechanical and established on a physics basis in the absence of turbulence, each performance can be explained by the morphology of the unit, extending the definition of catalysis to systems of alternative scales.

  8. Asymmetric Sequential Aza-Diels-Alder and O-Michael Addition: Efficient Construction of Chiral Hydropyrano[2,3-b]pyridines%Asymmetric Sequential Aza-Diels-Alder and O-Michael Addition: Efficient Construction of Chiral Hydropyrano[2,3-b]pyridines

    Institute of Scientific and Technical Information of China (English)

    尹祥; 圊清清; 董琳; 陈应春

    2012-01-01

    An asymmetric aza-Diels-Alder and O-Michael addition sequence has been developed to construct chiral hy- dropyrano[2,3-b]pyridine derivatives with good yields and excellent stereoselectivity, by starting with N-Ts-l-aza- 1,3-butadienes and aliphatic aldehydes tethered to an α,β-unsaturated ketone motif. A tandem O-Michael addition reaction was completed via acid catalysis.

  9. Magnetic catalysis (and inverse catalysis) at finite temperature in two-color lattice QCD

    CERN Document Server

    Ilgenfritz, E -M; Petersson, B; Schreiber, A

    2013-01-01

    Two-color lattice QCD with N_f=4 staggered fermion degrees of freedom (no rooting trick is applied) with equal electric charge q is studied in a homogeneous magnetic background field B and at non-zero temperature T. In order to circumvent renormalization as a function of the bare coupling we apply a fixed-scale approach. We study the influence of the magnetic field on the critical temperature. At rather small pseudo-scalar meson mass (m_pi \\approx 175 MeV \\approx T_c(B=0)) we confirm magnetic catalysis for sufficiently strong magnetic field strength, while at T=195 MeV and weak magnetic field (qB {\\lesssim} 0.8 GeV^2) we find a rise of the Polyakov loop with qB and thus, indications for an inverse magnetic catalysis.

  10. Organic photoredox catalysis for the oxidation of silicates: applications in radical synthesis and dual catalysis.

    Science.gov (United States)

    Lévêque, Christophe; Chenneberg, Ludwig; Corcé, Vincent; Ollivier, Cyril; Fensterbank, Louis

    2016-08-01

    Metal free photooxidation of alkyl bis(catecholato)silicates with the organic dye 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyano-benzene (4CzIPN) allows the smooth formation of alkyl radicals. The latter can be efficiently engaged either with radical acceptors to provide homolytic addition products or in photoredox/nickel dual catalysis reactions to obtain cross-coupling products.

  11. Asymmetric Information and Consumer Demand

    OpenAIRE

    Ismagilova G. N.; Danilina E. I.; Gafurov I. R.; Ismagilov R. I.; Safiullin L. N.

    2014-01-01

    In the paper study the peculiarities of the formation the consumer demand for durable goods, the so-called «experience goods» in markets with asymmetric information. In the known literature sources studying of the demand is based on the assumption that at the moment of the purchase of goods and services people know exactly what price they are willing to pay for them and what utility they are going to obtain using those goods and services. Consider the signal model in which the initial price a...

  12. Spontaneous baryogenesis from asymmetric inflaton

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, Fuminobu [Tohoku Univ., Sendai (Japan). Dept. of Physics; Tokyo Univ., Chiba (Japan). Kavli IPMU (WPI), UTIAS; Yamada, Masaki [Tokyo Univ., Chiba (Japan). Kavli IPMU (WPI), UTIAS; Tokyo Univ., Chiba (Japan). Inst. for Cosmic Ray Research; DESY Hamburg (Germany)

    2015-10-15

    We propose a variant scenario of spontaneous baryogenesis from asymmetric inflaton based on current-current interactions between the inflaton and matter fields with a non-zero B-L charge. When the inflaton starts to oscillate around the minimum after inflation, it may lead to excitation of a CP-odd component, which induces an effective chemical potential for the B-L number through the current-current interactions. We study concrete inflation models and show that the spontaneous baryogenesis scenario can be naturally implemented in the chaotic inflation in supergravity.

  13. Asymmetric Formal Synthesis of Azadirachtin.

    Science.gov (United States)

    Mori, Naoki; Kitahara, Takeshi; Mori, Kenji; Watanabe, Hidenori

    2015-12-01

    An asymmetric formal synthesis of azadirachtin, a potent insect antifeedant, was accomplished in 30 steps to Ley's synthetic intermediate (longest linear sequence). The synthesis features: 1) rapid access to the optically active right-hand segment starting from the known 5-hydroxymethyl-2-cyclopentenone scaffold; 2) construction of the B and E rings by a key intramolecular tandem radical cyclization; 3) formation of the hemiacetal moiety in the C ring through the α-oxidation of the six-membered lactone followed by methanolysis. PMID:26474211

  14. Transient Stability During Asymmetrical Faults

    OpenAIRE

    Couturier, Nicolas

    2015-01-01

    This research project has been conducted at RTE in order to study the transient stability after asymmetrical faults. When three-phase short-circuits occur in a network, almost all the electrical power is lost on the relevant line(s). Among all short-circuit types, it is the most drastic event and the issue has to be solved very quickly. But oddly, it is also the easiest problem to solve mathematically speaking. This comes from the fact that the system stays balanced, and equations can be simp...

  15. Magnetic Catalysis in Graphene Effective Field Theory

    CERN Document Server

    DeTar, Carleton; Zafeiropoulos, Savvas

    2016-01-01

    We report on the first observation of magnetic catalysis at zero temperature in a fully nonperturbative simulation of the graphene effective field theory. Using lattice gauge theory, a nonperturbative analysis of the theory of strongly-interacting, massless, (2+1)-dimensional Dirac fermions in the presence of an external magnetic field is performed. We show that in the zero-temperature limit, a nonzero value for the chiral condensate is obtained which signals the spontaneous breaking of chiral symmetry. This result implies a nonzero value for the dynamical mass of the Dirac quasiparticle. This in turn has been posited to account for the quantum-Hall plateaus that are observed at large magnetic fields.

  16. Novel Catalysis by Gold: A Modern Alchemy

    Science.gov (United States)

    Haruta, Masatake

    Gold has long been neglected as a catalyst because of its chemical inertness. However, when gold is deposited as nanoparticles on carbon and polymer materials as well as on base metal oxides and hydroxides, it exhibits unique catalytic properties for many reactions such as CO oxidation at a temperature as low as 200 K, gas phase direct epoxidation of propylene, and aerobic oxidation of glucose to gluconic acid. The structure-catalytic activity correlations are discussed with emphasis on the contact structure, support selection, and the size control of gold particles. Gold clusters with diameters smaller than 2 nm are expected to exhibit novel properties in catalysis, optics, and electronics depending on the size (number of atoms), shape, and the electronic and chemical interaction with the support materials. The above achievements and attempts can be regarded as a modern alchemy that creates valuables by means of the noblest element with little practical use.

  17. Enhanced Asymmetric Bilinear Model for Face Recognition

    OpenAIRE

    Wenjuan Gong; Weishan Zhang; Jordi Gonzàlez; Yan Ren; Zhen Li

    2015-01-01

    Bilinear models have been successfully applied to separate two factors, for example, pose variances and different identities in face recognition problems. Asymmetric model is a type of bilinear model which models a system in the most concise way. But seldom there are works exploring the applications of asymmetric bilinear model on face recognition problem with illumination changes. In this work, we propose enhanced asymmetric model for illumination-robust face recognition. Instead of initiali...

  18. Microbial electro-catalysis in fuel cell

    International Nuclear Information System (INIS)

    Microbial fuel cells (MFC) are devices that ensure the direct conversion of organic matter into electricity using bacterial bio-films as the catalysts of the electrochemical reactions. This study aims at improving the comprehension of the mechanisms involved in electron transfer pathways between the adhered bacteria and the electrodes. This optimization of the MFC power output could be done, for example, in exploring and characterizing various electrode materials. The electrolysis experiments carried out on Geobacter sulfurreducens deal with the microbial catalysis of the acetate oxidation, on the one hand, and the catalysis of the fumarate reduction on the other hand. On the anodic side, differences in current densities appeared on graphite, DSAR and stainless steel (8 A/m2, 5 A/m2 and 0.7 A/m2 respectively). These variations were explained more by materials roughness differences rather than their nature. Impedance spectroscopy study shows that the electro-active bio-film developed on stainless steel does not seem to modify the evolution of the stainless steel oxide layer, only the imposed potential remains determining. On the cathodic side, stainless steel sustained current densities more than twenty times higher than those obtained with graphite electrodes. The adhesion study of G. sulfurreducens on various materials in a flow cell, suggests that the bio-films resist to the hydrodynamic constraints and are not detached under a shear stress threshold value. The installation of two MFC prototypes, one in a sea station and the other directly in Genoa harbour (Italy) confirms some results obtained in laboratory and were promising for a MFC scale-up. (author)

  19. Prebiotic RNA Synthesis by Montmorillonite Catalysis

    Directory of Open Access Journals (Sweden)

    Sohan Jheeta

    2014-08-01

    Full Text Available This review summarizes our recent findings on the role of mineral salts in prebiotic RNA synthesis, which is catalyzed by montmorillonite clay minerals. The clay minerals not only catalyze the synthesis of RNA but also facilitate homochiral selection. Preliminary data of these findings have been presented at the “Horizontal Gene Transfer and the Last Universal Common Ancestor (LUCA” conference at the Open University, Milton Keynes, UK, 5–6 September 2013. The objective of this meeting was to recognize the significance of RNA in LUCA. We believe that the prebiotic RNA synthesis from its monomers must have been a simple process. As a first step, it may have required activation of the 5'-end of the mononucleotide with a leaving group, e.g., imidazole in our model reaction (Figure 1. Wide ranges of activating groups are produced from HCN under plausible prebiotic Earth conditions. The final step is clay mineral catalysis in the presence of mineral salts to facilitate selective production of functional RNA. Both the clay minerals and mineral salts would have been abundant on early Earth. We have demonstrated that while montmorillonite (pH 7 produced only dimers from its monomers in water, addition of sodium chloride (1 M enhanced the chain length multifold, as detected by HPLC. The effect of monovalent cations on RNA synthesis was of the following order: Li+ > Na+ > K+. A similar effect was observed with the anions, enhancing catalysis in the following order: Cl− > Br− > I−. The montmorillonite-catalyzed RNA synthesis was not affected by hydrophobic or hydrophilic interactions. We thus show that prebiotic synthesis of RNA from its monomers was a simple process requiring only clay minerals and a small amount of salt.

  20. Prebiotic RNA Synthesis by Montmorillonite Catalysis

    Science.gov (United States)

    Jheeta, Sohan; Joshi, Prakash C.

    2014-08-01

    This review summarizes our recent findings on the role of mineral salts in prebiotic RNA synthesis, which is catalyzed by montmorillonite clay minerals. The clay minerals not only catalyze the synthesis of RNA but also facilitate homochiral selection. Preliminary data of these findings have been presented at the "Horizontal Gene Transfer and the Last Universal Common Ancestor (LUCA)" conference at the Open University, Milton Keynes, UK, 5-6 September 2013. The objective of this meeting was to recognize the significance of RNA in LUCA. We believe that the prebiotic RNA synthesis from its monomers must have been a simple process. As a first step, it may have required activation of the 5'-end of the mononucleotide with a leaving group, e.g., imidazole in our model reaction (Figure 1). Wide ranges of activating groups are produced from HCN under plausible prebiotic Earth conditions. The final step is clay mineral catalysis in the presence of mineral salts to facilitate selective production of functional RNA. Both the clay minerals and mineral salts would have been abundant on early Earth. We have demonstrated that while montmorillonite (pH 7) produced only dimers from its monomers in water, addition of sodium chloride (1 M) enhanced the chain length multifold, as detected by HPLC. The effect of monovalent cations on RNA synthesis was of the following order: Li+ > Na+ > K+. A similar effect was observed with the anions, enhancing catalysis in the following order: Cl- > Br- > I-. The montmorillonite-catalyzed RNA synthesis was not affected by hydrophobic or hydrophilic interactions. We thus show that prebiotic synthesis of RNA from its monomers was a simple process requiring only clay minerals and a small amount of salt.

  1. Bifunctional Nb/Ti-MCM-41 catalyst in oxidative acidic reaction of cyclohexene to diol

    International Nuclear Information System (INIS)

    Bifunctional oxidative and acidic catalyst was prepared by incorporating titanium ion (Ti4+) and niobic acid in meso porous molecular sieves MCM-41 structure. The catalyst is active both in oxidation, and acid-catalyzed reaction of olefin to diol. Nb/ Ti-MCM-41 catalyst was prepared by first synthesizing Ti-MCM-41 by hydrothermal method, followed by subsequent impregnation of niobic acid (Nb) into Ti-MCM-41 at various % wt Nb loading. The framework structure of Ti-MCM-41 collapsed after incorporation of Nb but the tetrahedral form of Ti4+ still maintained with octahedral Nb species. Both Bronsted and Lewis acid sites are present in all Nb/ Ti-MCM-41 samples. The formation of cyclohexanediol in the epoxidation of cyclohexene proved the bifunctional oxidative and acidic catalyst through the formation of cyclohexane oxide. The yield increased with the increase amount of the Bronsted acid sites provided by niobium species. (author)

  2. Sorption of Pu(IV) from nitric acid by bifunctional anion-exchange resins

    International Nuclear Information System (INIS)

    Anion exchange is attractive for separating plutonium because the Pu(IV) nitrate complex is very strongly sorbed and few other metal ions form competing anionic nitrate complexes. The major disadvantage of this process has been the unusually slow rate at which the Pu(IV) nitrate complex is sorbed by the resin. The paper summarizes the concept of bifunctional anion-exchange resins, proposed mechanism for Pu(IV) sorption, synthesis of the alkylating agent, calculation of Kd values from Pu(IV) sorption results, and conclusions from the study of Pu(IV) sorption from 7M nitric acid by macroporous anion-exchange resins including level of crosslinking, level of alkylation, length of spacer, and bifunctional vs. monofunctional anion-exchange resins

  3. Increasing round trip efficiency of hybrid Li-air battery with bifunctional catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Huang, K; Li, YF; Xing, YC

    2013-07-30

    Previously it was shown that Pt as cathode catalyst ha's a large overpotential during charge in rechargeable hybrid Li-air battery with sulfuric acid catholyte. This article demonstrates that a bifunctional catalyst composed of Pt and IrO2 supported on carbon nanotubes can address this problem. The specially designed and synthesized bifunctional catalyst showed significant overpotential reduction and achieved a round trip energy efficiency of 81% after 10 cycles, higher than many achieved in aprotic Li-O-2 batteries. The hybrid Li-air battery was discharged and recharged for 20 cycles at 0.2 mA/cm(2), showing a fairly stable cell performance. A specific capacity of 306 mAh/g and a specific energy of 1110 Wh/kg were obtained for the hybrid Li-air battery in terms of acid weight. (c) 2013 Elsevier Ltd. All rights reserved.

  4. Tethering metal ions to photocatalyst particulate surfaces by bifunctional molecular linkers for efficient hydrogen evolution

    KAUST Repository

    Yu, Weili

    2014-08-19

    A simple and versatile method for the preparation of photocatalyst particulates modified with effective cocatalysts is presented; the method involves the sequential soaking of photocatalyst particulates in solutions containing bifunctional organic linkers and metal ions. The modification of the particulate surfaces is a universal and reproducible method because the molecular linkers utilize strong covalent bonds, which in turn result in modified monolayer with a small but controlled quantity of metals. The photocatalysis results indicated that the CdS with likely photochemically reduced Pd and Ni, which were initially immobilized via ethanedithiol (EDT) as a linker, were highly efficient for photocatalytic hydrogen evolution from Na2S-Na2SO3-containing aqueous solutions. The method developed in this study opens a new synthesis route for the preparation of effective photocatalysts with various combinations of bifunctional linkers, metals, and photocatalyst particulate materials. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Bifunctional metamaterials with simultaneous and independent manipulation of thermal and electric fields

    Science.gov (United States)

    Lan, Chuwen; Bi, Ke; Fu, Xiaojian; Li, Bo; Zhou, Ji

    2016-10-01

    Metamaterials offer a powerful way to manipulate a variety of physical fields ranging from wave fields (electromagnetic field, acoustic field, elastic wave, etc.), static fields (static magnetic field, static electric field) to diffusive fields (thermal field, diffusive mass). However, the relevant reports and studies are usually conducted on a single physical field or functionality. In this study, we proposed and experimentally demonstrated a bifunctional metamaterial which can manipulate thermal and electric fields simultaneously and independently. Specifically, a composite with independently controllable thermal and electric conductivity was introduced, on the basis of which a bifunctional device capable of shielding thermal flux and concentrating electric current simultaneously was designed, fabricated and characterized. This work provides an encouraging example of metamaterials transcending their natural limitations, which offers a promising future in building a broad platform for manipulation of multi-physics field.

  6. A bifunctional nonprecious metal catalyst for oxygen reduction and water oxidation.

    Science.gov (United States)

    Gorlin, Yelena; Jaramillo, Thomas F

    2010-10-01

    There is a growing interest in oxygen electrochemistry as conversions between O(2) and H(2)O play an important role in a variety of renewable energy technologies. The goal of this work is to develop active bifunctional catalyst materials for water oxidation and oxygen reduction. Drawing inspiration from a cubane-like CaMn(4)O(x), the biological catalyst found in the oxygen evolving center (OEC) in photosystem II, nanostructured manganese oxide surfaces were investigated for these reactions. Thin films of nanostructured manganese oxide were found to be active for both oxygen reduction and water oxidation, with similar overall oxygen electrode activity to the best known precious metal nanoparticle catalysts: platinum, ruthenium, and iridium. Physical and chemical characterization of the nanostructured Mn oxide bifunctional catalyst reveals an oxidation state of Mn(III), akin to one of the most commonly observed Mn oxidation states found in the OEC. PMID:20839797

  7. Improving stability and biocompatibility of alginate/chitosan microcapsule by fabricating bi-functional membrane.

    Science.gov (United States)

    Zheng, Guoshuang; Liu, Xiudong; Wang, Xiuli; Chen, Li; Xie, Hongguo; Wang, Feng; Zheng, Huizhen; Yu, Weiting; Ma, Xiaojun

    2014-05-01

    Cell encapsulation technology holds promise for the cell-based therapy. But poor mechanical strength and biocompatibility of microcapsule membrane are still obstacles for the clinical applications. A novel strategy is presented to prepare AC₁ C₂ A microcapsules with bi-functional membrane (that is, both desirable biocompatibility and membrane stability) by sequentially complexing chitosans with higher deacetylation degree (C₁) and lower deacetylation degree (C₂) on alginate (A) gel beads. Both in vitro and in vivo evaluation of AC₁C₂ A microcapsules demonstrate higher membrane stability and less cell adhesion, because the introduction of C₂ increases membrane strength and decreases surface roughness. Moreover, diffusion test of AC₁C₂ A microcapsules displays no inward permeation of IgG protein suggesting good immunoisolation function. The results demonstrate that AC₁C₂ A microcapsules with bi-functional membrane could be a promising candidate for microencapsulated cell implantation with cost effective usage of naturally biocompatible polysaccharides.

  8. Bifunctional silica nanoparticles for the exploration of biofilms of Pseudomonas aeruginosa

    OpenAIRE

    Mauline, Léïla; Gressier, Marie; Roques, Christine; Hammer, Peter,; Ribeiro, Sidney J. L.; Caiut, José Maurício A.; Menu, Marie-Joëlle

    2013-01-01

    Luminescent silica nanoparticles are frequently employed for biotechnology applications mainly because of their easy functionalization, photo-stability, and biocompatibility. Bifunctional silica nanoparticles (BSNPs) are described here as new efficient tools for investigating complex biological systems such as biofilms. Photoluminescence is brought about by the incorporation of a silylated ruthenium (II) complex. The surface properties of the silica particles were designed by reaction with am...

  9. A new bifunctional hybrid nanostructure as an active platform for photothermal therapy and MR imaging

    OpenAIRE

    Mona Khafaji; Manouchehr Vossoughi; M. Reza Hormozi-Nezhad; Rassoul Dinarvand; Felix Börrnert; Azam Irajizad

    2016-01-01

    As a bi-functional cancer treatment agent, a new hybrid nanostructure is presented which can be used for photothermal therapy by exposure to one order of magnitude lower laser powers compared to similar nanostructures in addition to substantial enhancment in magnetic resonance imaging (MRI) contrast. This gold-iron oxide hybrid nanostructure (GIHN) is synthesized by a cost-effective and high yield water-based approach. The GIHN is sheilded by PEG. Therefore, it shows high hemo and biocompatib...

  10. Bifunctional catalysts for the direct production of liquid fuels from syngas

    OpenAIRE

    Sartipi, S.

    2014-01-01

    Design and development of catalyst formulations that maximize the direct production of liquid fuels by combining Fischer-Tropsch synthesis (FTS), hydrocarbon cracking, and isomerization into one single catalyst particle (bifunctional FTS catalyst) have been investigated in this thesis. To achieve this aim, a second functionality (other than FTS) has to be added to the catalyst formulation to break the limitation of a classical Anderson-Schulz-Flory (ASF) distribution of FTS products. Since up...

  11. GST-TAT-SOD: Cell Permeable Bifunctional Antioxidant Enzyme—A Potential Selective Radioprotector

    OpenAIRE

    Jianru Pan; Huocong He; Ying Su; Guangjin Zheng; Junxin Wu; Shutao Liu; Pingfan Rao

    2016-01-01

    Superoxide dismutase (SOD) fusion of TAT was proved to be radioprotective in our previous work. On that basis, a bifunctional recombinant protein which was the fusion of glutathione S-transferase (GST), SOD, and TAT was constructed and named GST-TAT-SOD. Herein we report the investigation of the cytotoxicity, cell-penetrating activity, and in vitro radioprotective effect of GST-TAT-SOD compared with wild SOD, single-function recombinant protein SOD-TAT, and amifostine. We demonstrated that wi...

  12. Synthesis of acid-base bifunctional mesoporous materials by oxidation and thermolysis

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Xiaofang [College of Chemistry, Jilin University, Jiefang Road 2519, Changchun 130023 (China); Zou, Yongcun [State Key Laboratory of Inoranic Synthesis and Preparative Chemistryg, College of Chemistry, Jilin University, Changchun 130012 (China); Wu, Shujie; Liu, Heng [College of Chemistry, Jilin University, Jiefang Road 2519, Changchun 130023 (China); Guan, Jingqi, E-mail: guanjq@jlu.edu.cn [College of Chemistry, Jilin University, Jiefang Road 2519, Changchun 130023 (China); Kan, Qiubin, E-mail: qkan@jlu.edu.cn [College of Chemistry, Jilin University, Jiefang Road 2519, Changchun 130023 (China)

    2011-06-15

    Graphical abstract: A novel and efficient method has been developed for the synthesis of acid-base bifunctional catalyst. The obtained sample of SO{sub 3}H-MCM-41-NH{sub 2} containing amine and sulfonic acids exhibits excellent catalytic activity in aldol condensation reaction. Research highlights: {yields} Synthesize acid-base bifunctional mesoporous materials SO{sub 3}H-MCM-41-NH{sub 2}. {yields} Oxidation and then thermolysis to generate acidic site and basic site. {yields} Exhibit good catalytic performance in aldol condensation reaction between acetone and various aldehydes. -- Abstract: A novel and efficient method has been developed for the synthesis of acid-base bifunctional catalyst SO{sub 3}H-MCM-41-NH{sub 2}. This method was achieved by co-condensation of tetraethylorthosilicate (TEOS), 3-mercaptopropyltrimethoxysilane (MPTMS) and (3-triethoxysilylpropyl) carbamicacid-1-methylcyclohexylester (3TAME) in the presence of cetyltrimethylammonium bromide (CTAB), followed by oxidation and then thermolysis to generate acidic site and basic site. X-ray diffraction (XRD) and transmission electron micrographs (TEM) show that the resultant materials keep mesoporous structure. Thermogravimetric analysis (TGA), X-ray photoelectron spectra (XPS), back titration, solid-state {sup 13}C CP/MAS NMR and solid-state {sup 29}Si MAS NMR confirm that the organosiloxanes were condensed as a part of the silica framework. The bifunctional sample (SO{sub 3}H-MCM-41-NH{sub 2}) containing amine and sulfonic acids exhibits excellent acid-basic properties, which make it possess high activity in aldol condensation reaction between acetone and various aldehydes.

  13. Excitons in asymmetric quantum wells

    Science.gov (United States)

    Grigoryev, P. S.; Kurdyubov, A. S.; Kuznetsova, M. S.; Ignatiev, I. V.; Efimov, Yu. P.; Eliseev, S. A.; Petrov, V. V.; Lovtcius, V. A.; Shapochkin, P. Yu.

    2016-09-01

    Resonance dielectric response of excitons is studied for the high-quality InGaAs/GaAs heterostructures with wide asymmetric quantum wells (QWs). To highlight effects of the QW asymmetry, we have grown and studied several heterostructures with nominally square QWs as well as with triangle-like QWs. Several quantum confined exciton states are experimentally observed as narrow exciton resonances. A standard approach for the phenomenological analysis of the profiles is generalized by introducing different phase shifts for the light waves reflected from the QWs at different exciton resonances. Good agreement of the phenomenological fit to the experimentally observed exciton spectra for high-quality structures allowed us to reliably obtain parameters of the exciton resonances: the exciton transition energies, the radiative broadenings, and the phase shifts. A direct numerical solution of the Schrödinger equation for the heavy-hole excitons in asymmetric QWs is used for microscopic modeling of the exciton resonances. Remarkable agreement with the experiment is achieved when the effect of indium segregation is taken into account. The segregation results in a modification of the potential profile, in particular, in an asymmetry of the nominally square QWs.

  14. Asymmetric Laguerre-Gaussian beams

    Science.gov (United States)

    Kovalev, A. A.; Kotlyar, V. V.; Porfirev, A. P.

    2016-06-01

    We introduce a family of asymmetric Laguerre-Gaussian (aLG) laser beams. The beams have been derived via a complex-valued shift of conventional LG beams in the Cartesian plane. While propagating in a uniform medium, the first bright ring of the aLG beam becomes less asymmetric and the energy is redistributed toward peripheral diffraction rings. The projection of the orbital angular momentum (OAM) onto the optical axis is calculated. The OAM is shown to grow quadratically with increasing asymmetry parameter of the aLG beam, which equals the ratio of the shift to the waist radius. Conditions for the OAM becoming equal to the topological charge have been derived. For aLG beams with zero radial index, we have deduced an expression to define the intensity maximum coordinates and shown the crescent-shaped intensity pattern to rotate during propagation. Results of the experimental generation and rotation of aLG beams agree well with theoretical predictions.

  15. Asymmetric Wettability Directs Leidenfrost Droplets

    Science.gov (United States)

    Agapov, Rebecca; Boreyko, Jonathan; Briggs, Dayrl; Srijanto, Bernadeta; Retterer, Scott; Collier, C. Patrick; Lavrik, Nickolay

    2014-03-01

    Exploration of Leidenfrost droplets on nano- and microstructured surfaces are of great importance for increasing control over heat transfer in high power density systems using boiling phenomena. They also provide an elegant way to direct droplet motion in a variety of emerging fluidic systems. Here, we report the fabrication and characterization of tilted nanopillar arrays (TNPAs) that exhibit directional Leidenfrost water droplets under dynamic conditions. The batch fabrication of the TNPAs was achieved by glancing-angle anisotropic reactive ion etching of a thermally dewet platinum mask. In contrast to previously implemented macro- and microscopic Leidenfrost ratchets, our TNPAs induce no preferential directional movement of Leidenfrost droplets under conditions approaching steady-state film boiling. This suggests that the observed droplet directionality is not a result of asymmetric vapor flow. Phase diagrams were constructed for the boiling behavior upon droplet impact onto TNPAs, straight nanopillar arrays, and smooth silicon surfaces. Asymmetric wettability and directional trajectory of droplets was exclusive to the TNPAs for impacts corresponding to the transition boiling regime, revealing this to be the mechanism for the droplet directionality. This work was conducted at the Center for Nanophase Materials Sciences, which is sponsored at Oak Ridge National Lab by the Division of Scientific User Facilities, US Dept. of Energy.

  16. Collagen/chitosan based two-compartment and bi-functional dermal scaffolds for skin regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Feng [Department of Plastic Surgery and Burns, Shenzhen Second People' s Hospital, Shenzhen 518035 (China); Wang, Mingbo [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); She, Zhending [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shenzhen Lando Biomaterials Co., Ltd., Shenzhen 518057 (China); Fan, Kunwu; Xu, Cheng [Department of Plastic Surgery and Burns, Shenzhen Second People' s Hospital, Shenzhen 518035 (China); Chu, Bin; Chen, Changsheng [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shi, Shengjun, E-mail: shengjunshi@yahoo.com [The Burns Department of Zhujiang Hospital, Southern Medical University, Guangzhou 510280 (China); Tan, Rongwei, E-mail: tanrw@landobiom.com [Key Laboratory of Biomedical Materials and Implants, Research Institute of Tsinghua University in Shenzhen, Shenzhen 518057 (China); Shenzhen Lando Biomaterials Co., Ltd., Shenzhen 518057 (China)

    2015-07-01

    Inspired from the sophisticated bilayer structures of natural dermis, here, we reported collagen/chitosan based two-compartment and bi-functional dermal scaffolds. Two functions refer to mediating rapid angiogenesis based on recombinant human vascular endothelial growth factor (rhVEGF) and antibacterial from gentamicin, which were encapsulated in PLGA microspheres. The gentamicin and rhVEGF encapsulated PLGA microspheres were further combined with collagen/chitosan mixtures in low (lower layer) and high (upper layer) concentrations, and molded to generate the two-compartment and bi-functional scaffolds. Based on morphology and pore structure analyses, it was found that the scaffold has a distinct double layered porous and connective structure with PLGA microspheres encapsulated. Statistical analysis indicated that the pores in the upper layer and in the lower layer have great variations in diameter, indicative of a two-compartment structure. The release profiles of gentamicin and rhVEGF exceeded 28 and 49 days, respectively. In vitro culture of mouse fibroblasts showed that the scaffold can facilitate cell adhesion and proliferation. Moreover, the scaffold can obviously inhibit proliferation of Staphylococcus aureus and Serratia marcescens, exhibiting its unique antibacterial effect. The two-compartment and bi-functional dermal scaffolds can be a promising candidate for skin regeneration. - Highlights: • The dermal scaffold is inspired from the bilayer structures of natural dermis. • The dermal scaffold has two-compartment structures. • The dermal scaffold containing VEGF and gentamicin encapsulated PLGA microspheres • The dermal scaffold can facilitate cell adhesion and proliferation.

  17. A New Synthesis of TE2A-a Potential Bifunctional Chelator for {sup 64}Cu

    Energy Technology Data Exchange (ETDEWEB)

    Pandya, Darpan N.; Kwak, Won Jung; Park, Jeong Chan; Gawande, Manoj B.; Yoo, Jeong Soo [Kyungpook National University, Daegu (Korea, Republic of); Kim, Jung Young; An, Gwang Il [Molecular Imaging Research Center, Seoul (Korea, Republic of); Ryu, Eun Kyoung [Korea Basic Science Institute, Chungbuk (Korea, Republic of)

    2010-09-15

    The development of a new bifunctional chelator, which holds radio metals strongly in living systems, is a prerequisite for the successful application of disease-specific biomolecules to medical diagnosis and therapy. Recently, TE2A was reported to make kinetically more stable Cu({Pi}) complexes than TETA. Herein, we report a new synthetic route to TE2A and explore its potential as a bifunctional chelator. TE2A was synthesized using the regioselective alkylation of benzyl bromoacetate and successive de protection of the methylene bridge and benzyl group. Salt-free TE2A was radiolabeled with {sup 64}Cu and micro PET imaging was performed to follow the clearance pattern of the {sup 64}Cu-TE2A complex. TE2A was conjugated with cyclic RGD peptide and the TE2A-c(RGDyK) conjugate was radiolabeled with {sup 64}Cu. TE2A was prepared in salt-free form cyclam in an overall yield of 74%. The micro PET images showed that {sup 64}Cu-TE2A is excreted rapidly from the body by the kidney and liver. TE2A was successfully conjugated with c(RGDyK) peptide through on carboxylate group and the TE2A-c(RGDyK) conjugate was radiolabeled with {sup 64}Cu in 94% yield within 30 min. TE2A can be used by itself as a bifunctional chelator without any further structural modification.

  18. Bifunctional Catalysts for Upgrading of Biomass-Derived Oxygenates: A Review

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Allison M.; Hensley, Jesse E.; Medlin, J. Will

    2016-08-05

    Deoxygenation is an important reaction in the conversion of biomass-derived oxygenates to fuels and chemicals. A key route for biomass refining involves the production of pyrolysis oil through rapid heating of the raw biomass feedstock. Pyrolysis oil as produced is highly oxygenated, so the feasibility of this approach depends in large part on the ability to selectively deoxygenate pyrolysis oil components to create a stream of high-value finished products. Identification of catalytic materials that are active and selective for deoxygenation of pyrolysis oil components has therefore represented a major research area. One catalyst is rarely capable of performing the different types of elementary reaction steps required to deoxygenate biomass-derived compounds. For this reason, considerable attention has been placed on bifunctional catalysts, where two different active materials are used to provide catalytic sites for diverse reaction steps. Here, we review recent trends in the development of catalysts, with a focus on catalysts for which a bifunctional effect has been proposed. We summarize recent studies of hydrodeoxygenation (HDO) of pyrolysis oil and model compounds for a range of materials, including supported metal and bimetallic catalysts as well as transition-metal oxides, sulfides, carbides, nitrides, and phosphides. Particular emphasis is placed on how catalyst structure can be related to performance via molecular-level mechanisms. These studies demonstrate the importance of catalyst bifunctionality, with each class of materials requiring hydrogenation and C-O scission sites to perform HDO at reasonable rates.

  19. Comparison of Dynamical Behaviors Between Monofunctional and Bifunctional Two-Component Signaling Modules

    Science.gov (United States)

    Yang, Xiyan; Wu, Yahao; Yuan, Zhanjiang

    2015-06-01

    Two-component signaling modules exist extensively in bacteria and microbes. These modules can be, based on their distinct network structures, divided into two types: the monofunctional system (denoted by MFS) where the sensor kinase (SK) modulates only phosphorylation of the response regulator (RR), and the bifunctional system (denoted by BFS) where the SK catalyzes both phosphorylation and dephosphorylation of the RR. Here, we analyze dynamical behaviors of these two systems based on stability theory, focusing on differences between them. The analysis of the deterministic behavior indicates that there is no difference between the two modules, that is, each system has the unique stable steady state. However, there are significant differences in stochastic behavior between them. Specifically, if the mean phosphorylated SK level is kept the same for the two modules, then the variance and the Fano factor for the phosphorylated RR in the BFS are always no less than those in the MFS, indicating that bifunctionality always enhances fluctuations. The correlation between the phosphorylated SK and the phosphorylated RR in the BFS is always positive mainly due to competition between system components, but this correlation in the MFS may be positive, almost zero, or negative, depending on the ratio between two rate constants. Our overall analysis indicates that differences between dynamical behaviors of monofunctional and bifunctional signaling modules are mainly in the stochastic rather than deterministic aspect.

  20. Bifunctional Perovskite Oxide Catalysts for Oxygen Reduction and Evolution in Alkaline Media.

    Science.gov (United States)

    Gupta, Shiva; Kellogg, William; Xu, Hui; Liu, Xien; Cho, Jaephil; Wu, Gang

    2016-01-01

    Oxygen electrocatalysis, namely of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER), governs the performance of numerous electrochemical energy systems such as reversible fuel cells, metal-air batteries, and water electrolyzers. However, the sluggish kinetics of these two reactions and their dependency on expensive noble metal catalysts (e.g, Pt or Ir) prohibit the sustainable commercialization of these highly innovative and in-demand technologies. Bifunctional perovskite oxides have emerged as a new class of highly efficient non-precious metal catalysts (NPMC) for oxygen electrocatalysis in alkaline media. In this review, we discuss the state-of-the-art understanding of bifunctional properties of perovskites with regards to their OER/ORR activity in alkaline media and review the associated reaction mechanisms on the oxides surface and the related activity descriptors developed in the recent literature. We also summarize the present strategies to modify their electronic structure and to further improve their performance for the ORR/OER through highlighting the new concepts relating to the role of surface redox chemistry and oxygen deficiency of perovskite oxides for the ORR/OER activity. In addition, we provide a brief account of recently developed advanced perovskite-nanocarbon hybrid bifunctional catalysts with much improved performances. PMID:26247625

  1. Some Remarks on Asymmetric Syntheses from Recent Studies

    OpenAIRE

    Baba, Naomichi

    1990-01-01

    Some asymmetric syntheses were presented here and discussed briefly including NADH model reactions, phase transfer-catalyzed asymmetric epoxidation, enantiotopic group-selective hydrolysis of a malonic anhydride with alkoxide anion, intramolecular acid-catalyzed lactonizations, catalytic asymmetric Diels-Alder synthesis, asymmetric aldol condensation, chiral homoallyl alcohol synthesis, asymmetric addition of diethylzinc to aldehyde, kinetic resolution of racemic hydroperoxides and binaphthol...

  2. Inverse opal ceria–zirconia: architectural engineering for heterogeneous catalysis

    OpenAIRE

    Umeda, G. A.; Chueh, William C.; Noailles, Liam; Haile, Sossina M.; Dunn, B. S.

    2008-01-01

    The application of inverse opal structured materials is extended to the ceria–zirconia (Ce_(0.5)Zr_(0.5)O_2) system and the significance of material architecture on heterogeneous catalysis, specifically, chemical oxidation, is examined.

  3. Nanostructured Membranes for Enzyme Catalysis and Green Synthesis of Nanoparticles

    Science.gov (United States)

    Macroporous membranes functionalized with ionizable macromolecules provide promising applications in toxic metal capture at high capacity, nanoparticle synthesis, and catalysis. Our low-pressure membrane approach is marked by reaction and separation selectivity and their tunabil...

  4. Catalysis of Radical Reactions: A Radical Chemistry Perspective.

    Science.gov (United States)

    Studer, Armido; Curran, Dennis P

    2016-01-01

    The area of catalysis of radical reactions has recently flourished. Various reaction conditions have been discovered and explained in terms of catalytic cycles. These cycles rarely stand alone as unique paths from substrates to products. Instead, most radical reactions have innate chains which form products without any catalyst. How do we know if a species added in "catalytic amounts" is a catalyst, an initiator, or something else? Herein we critically address both catalyst-free and catalytic radical reactions through the lens of radical chemistry. Basic principles of kinetics and thermodynamics are used to address problems of initiation, propagation, and inhibition of radical chains. The catalysis of radical reactions differs from other areas of catalysis. Whereas efficient innate chain reactions are difficult to catalyze because individual steps are fast, both inefficient chain processes and non-chain processes afford diverse opportunities for catalysis, as illustrated with selected examples.

  5. Selective Oxidation and Ammoxidation of Olefins by Heterogeneous Catalysis.

    Science.gov (United States)

    Grasselli, Robert K.

    1986-01-01

    Shows how the ammoxidation of olefins can be understood in terms of free radicals and surface bound organometallic intermediates. Also illustrates the close intellectual relationships between heterogeneous catalysis and organometallic chemistry. (JN)

  6. Density functional theory studies of transition metal nanoparticles in catalysis

    DEFF Research Database (Denmark)

    Greeley, Jeffrey Philip; Rankin, Rees; Zeng, Zhenhua;

    2013-01-01

    Periodic Density Functional Theory calculations are capable of providing powerful insights into the structural, energetics, and electronic phenomena that underlie heterogeneous catalysis on transition metal nanoparticles. Such calculations are now routinely applied to single crystal metal surfaces...... and to subnanometer metal clusters. Descriptions of catalysis on truly nanosized structures, however, are generally not as well developed. In this talk, I will illustrate different approaches to analyzing nanocatalytic phenomena with DFT calculations. I will describe case studies from heterogeneous catalysis...... and electrocatalysis, in which single crystal models are combined with Wulff construction-based ideas to produce descriptions of average nanocatalyst behavior. Then, I will proceed to describe explicitly DFT-based descriptions of catalysis on truly nanosized particles (

  7. Applications of metal-organic frameworks in heterogeneous supramolecular catalysis.

    Science.gov (United States)

    Liu, Jiewei; Chen, Lianfen; Cui, Hao; Zhang, Jianyong; Zhang, Li; Su, Cheng-Yong

    2014-08-21

    This review summarizes the use of metal-organic frameworks (MOFs) as a versatile supramolecular platform to develop heterogeneous catalysts for a variety of organic reactions, especially for liquid-phase reactions. Following a background introduction about catalytic relevance to various metal-organic materials, crystal engineering of MOFs, characterization and evaluation methods of MOF catalysis, we categorize catalytic MOFs based on the types of active sites, including coordinatively unsaturated metal sites (CUMs), metalloligands, functional organic sites (FOS), as well as metal nanoparticles (MNPs) embedded in the cavities. Throughout the review, we emphasize the incidental or deliberate formation of active sites, the stability, heterogeneity and shape/size selectivity for MOF catalysis. Finally, we briefly introduce their relevance into photo- and biomimetic catalysis, and compare MOFs with other typical porous solids such as zeolites and mesoporous silica with regard to their different attributes, and provide our view on future trends and developments in MOF-based catalysis.

  8. Intermetallic compounds in heterogeneous catalysis - a quickly developing field

    OpenAIRE

    Armbrüster, M.; Schlögl, R.; Grin, Y.

    2014-01-01

    The application of intermetallic compounds for understanding in heterogeneous catalysis developed in an excellent way during the last decade. This review provides an overview of concepts and developments revealing the potential of intermetallic compounds in fundamental as well as applied catalysis research. Intermetallic compounds may be considered as platform materials to address current and future catalytic challenges, e.g. in respect to the energy transition.

  9. 3. International conference on catalysis in membrane reactors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The 3. International Conference on Catalysis in Membrane Reactors, Copenhagen, Denmark, is a continuation of the previous conferences held in Villeurbanne 1994 and Moscow 1996 and will deal with the rapid developments taking place within membranes with emphasis on membrane catalysis. The approx. 80 contributions in form of plenary lectures and posters discuss hydrogen production, methane reforming into syngas, selectivity and specificity of various membranes etc. The conference is organised by the Danish Catalytic Society under the Danish Society for Chemical Engineering. (EG)

  10. Dedicated Beamline Facilities for Catalytic Research. Synchrotron Catalysis Consortium (SCC)

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jingguang [Columbia Univ., New York, NY; Frenkel, Anatoly [Yeshiva Univ., New York, NY (United States); Rodriguez, Jose [Brookhaven National Lab. (BNL), Upton, NY (United States); Adzic, Radoslav [Brookhaven National Lab. (BNL), Upton, NY (United States); Bare, Simon R. [UOP LLC, Des Plaines, IL (United States); Hulbert, Steve L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Karim, Ayman [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mullins, David R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Overbury, Steve [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-03-04

    Synchrotron spectroscopies offer unique advantages over conventional techniques, including higher detection sensitivity and molecular specificity, faster detection rate, and more in-depth information regarding the structural, electronic and catalytic properties under in-situ reaction conditions. Despite these advantages, synchrotron techniques are often underutilized or unexplored by the catalysis community due to various perceived and real barriers, which will be addressed in the current proposal. Since its establishment in 2005, the Synchrotron Catalysis Consortium (SCC) has coordinated significant efforts to promote the utilization of cutting-edge catalytic research under in-situ conditions. The purpose of the current renewal proposal is aimed to provide assistance, and to develop new sciences/techniques, for the catalysis community through the following concerted efforts: Coordinating the implementation of a suite of beamlines for catalysis studies at the new NSLS-II synchrotron source; Providing assistance and coordination for catalysis users at an SSRL catalysis beamline during the initial period of NSLS to NSLS II transition; Designing in-situ reactors for a variety of catalytic and electrocatalytic studies; Assisting experimental set-up and data analysis by a dedicated research scientist; Offering training courses and help sessions by the PIs and co-PIs.

  11. Condensation on Slippery Asymmetric Bumps

    CERN Document Server

    Park, Kyoo-Chul; He, Neil; Aizenberg, Joanna

    2015-01-01

    Bumps are omnipresent from human skin to the geological structures on planets, which offer distinct advantages in numerous phenomena including structural color, drag reduction, and extreme wettability. Although the topographical parameters of bumps such as radius of curvature of convex regions significantly influence various phenomena including anti-reflective structures and contact time of impacting droplets, the effect of the detailed bump topography on growth and transport of condensates have not been clearly understood. Inspired by the millimetric bumps of the Namib Desert beetle, here we report the identified role of radius of curvature and width of bumps with homogeneous surface wettability in growth rate, coalescence and transport of water droplets. Further rational design of asymmetric convex topography and synergetic combination with slippery coating simultaneously enable self-transport, leading to unseen five-fold higher growth rate and an order of magnitude faster shedding time of droplets compared...

  12. New asymmetric quantum codes over Fq

    Science.gov (United States)

    Ma, Yuena; Feng, Xiaoyi; Xu, Gen

    2016-07-01

    Two families of new asymmetric quantum codes are constructed in this paper. The first family is the asymmetric quantum codes with length n=qm-1 over Fq, where qge 5 is a prime power. The second one is the asymmetric quantum codes with length n=3m-1. These asymmetric quantum codes are derived from the CSS construction and pairs of nested BCH codes. Moreover, let the defining set T1=T2^{-q}, then the real Z-distance of our asymmetric quantum codes are much larger than δ _max+1, where δ _max is the maximal designed distance of dual-containing narrow-sense BCH code, and the parameters presented here have better than the ones available in the literature.

  13. Probing the Impact of the EchinT C-Terminal Domain on Structure and Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    S Bardaweel; J Pace; T Chou; V Cody; C Wagner

    2011-12-31

    Histidine triad nucleotide binding protein (Hint) is considered as the ancestor of the histidine triad protein superfamily and is highly conserved from bacteria to humans. Prokaryote genomes, including a wide array of both Gram-negative bacteria and Gram-positive bacteria, typically encode one Hint gene. The cellular function of Hint and the rationale for its evolutionary conservation in bacteria have remained a mystery. Despite its ubiquity and high sequence similarity to eukaryote Hint1 [Escherichia coli Hint (echinT) is 48% identical with human Hint1], prokaryote Hint has been reported in only a few studies. Here we report the first conformational information on the full-length N-terminal and C-terminal residues of Hint from the E. coli complex with GMP. Structural analysis of the echinT-GMP complex reveals that it crystallizes in the monoclinic space group P2{sub 1} with four homodimers in the asymmetric unit. Analysis of electron density for both the N-terminal residues and the C-terminal residues of the echinT-GMP complex indicates that the loops in some monomers can adopt more than one conformation. The observation of conformational flexibility in terminal loop regions could explain the presence of multiple homodimers in the asymmetric unit of this structure. To explore the impact of the echinT C-terminus on protein structure and catalysis, we conducted a series of catalytic radiolabeling and kinetic experiments on the C-terminal deletion mutants of echinT. In this study, we show that sequential deletion of the C-terminus likely has no effect on homodimerization and a modest effect on the secondary structure of echinT. However, we observed a significant impact on the folding structure, as reflected by a significant lowering of the T{sub m} value. Kinetic analysis reveals that the C-terminal deletion mutants are within an order of magnitude less efficient in catalysis compared to wild type, while the overall kinetic mechanism that proceeds through a fast step

  14. Preparation and characteristics of Fe3O4-YVO4:Eu3+ bifunctional magnetic-luminescent nanocomposites

    International Nuclear Information System (INIS)

    Graphical abstract: Highlights: → Bifunctional magnetic-luminescent nanocomposites with Fe3O4 nanoparticles as the core and YVO4:Eu3+ as the shell. → A cubic spinel structrue of Fe3O4 core and a tetragonal phase of YVO4 shell were obtained. → The nanocomposites displayed a strong red emission and superparamagnetic behavior at room temperature. - Abstract: A facile direct precipitation method has been developed for the synthesis of bifunctional magnetic-luminescent nanocomposites with Fe3O4 nanoparticles as the core and YVO4:Eu3+ as the shell. Transmission electron microscopy (TEM) images revealed that the obtained bifunctional nanocomposites had a core-shell structure and a spherical morphology. The average size was ∼150 nm, and the thickness of the shell was ∼15 nm. The X-ray diffraction (XRD) patterns showed that a cubic spinel structure of Fe3O4 core and a tetragonal phase of YVO4 shell were obtained. Fourier transform infrared (FT-IR) spectra confirmed that the YVO4:Eu3+ had been successfully deposited on the surface of Fe3O4 nanoparticles. Photoluminescence (PL) spectra indicated that the nanocomposites displayed a strong red characteristic emission of Eu3+. Magnetic measurements showed that the obtained bifunctional nanocomposites exhibited superparamagnetic behavior at room temperature. Therefore, the bifunctional nanocomposites are expected to develop many potential applications in biomedical fields.

  15. Some General Themes in Catalysis at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, John C. [Los Alamos National Laboratory

    2012-07-19

    Some general themes in catalysis at LANL are: (1) Storage and release of energy within chemical bonds (e.g. H{sub 2} storage in and release from covalent bonds, N{sub 2} functionalization, CO{sub 2} functionalization, H{sub 2} oxidation/evolution, O{sub 2} reduction/evolution); (2) Can we control the chemistry of reactive substrates to effect energy relevant transformations in non-traditional media (e.g. can we promote C-C couplings, dehydrations, or hydrogenations in water under relatively mild conditions)? (3) Can we supplant precious metal or rare earth catalysts to effect these transformations, by using earth abundant metals/elements instead? Can we use organocatalysis and circumvent the use of metals completely? (4) Can we improve upon existing rare earth catalyst systems (e.g. in rare earth oxides pertinent to fluid cracking or polymerization) and reduce amounts required for catalytic efficacy? Carbohydrates can be accessed from non-food based biomass sources such as woody residues and switchgrass. After extracted from the plant source, our goal is to upgrade these classes of molecules into useful fuels.

  16. Ferroelectric based catalysis: Switchable surface chemistry

    Science.gov (United States)

    Kakekhani, Arvin; Ismail-Beigi, Sohrab

    2015-03-01

    We describe a new class of catalysts that uses an epitaxial monolayer of a transition metal oxide on a ferroelectric substrate. The ferroelectric polarization switches the surface chemistry between strongly adsorptive and strongly desorptive regimes, circumventing difficulties encountered on non-switchable catalytic surfaces where the Sabatier principle dictates a moderate surface-molecule interaction strength. This method is general and can, in principle, be applied to many reactions, and for each case the choice of the transition oxide monolayer can be optimized. Here, as a specific example, we show how simultaneous NOx direct decomposition (into N2 and O2) and CO oxidation can be achieved efficiently on CrO2 terminated PbTiO3, while circumventing oxygen (and sulfur) poisoning issues. One should note that NOx direct decomposition has been an open challenge in automotive emission control industry. Our method can expand the range of catalytically active elements to those which are not conventionally considered for catalysis and which are more economical, e.g., Cr (for NOx direct decomposition and CO oxidation) instead of canonical precious metal catalysts. Primary support from Toyota Motor Engineering and Manufacturing, North America, Inc.

  17. Catalysis of Forster Resonances in Rubidium

    Science.gov (United States)

    Win, A. L.; Williams, W. D.; Sukenik, C. I.

    2016-05-01

    When two ultracold Rydberg atoms collide they may change their quantum state if the total electronic energy of the two atoms before and after the collision is about the same. This process can be made resonant by tuning the energy levels of the atoms with an electric field, via the Stark shift, so that the energy difference between incoming and outgoing channels vanishes. This condition is known as a ``Forster resonance.'' We have studied a particular Forster resonance in rubidium: 34p + 34p --> 34s + 35s, by investigating the time dependence of the state change in an ultracold environment. Furthermore, we have added 34d state atoms to the mix and observed an enhancement of 34s atom production. We attribute this enhancement to a catalysis effect whereby the 34d atoms alter the spatial distribution of 34p atoms that participate in the energy transfer interaction. We will present results from the experiment and compare them to model calculations. Present address: Department of Physics, Smith College, Northampton, MA.

  18. Regenerating a symmetry in asymmetric dark matter.

    Science.gov (United States)

    Buckley, Matthew R; Profumo, Stefano

    2012-01-01

    Asymmetric dark matter theories generically allow for mass terms that lead to particle-antiparticle mixing. Over the age of the Universe, dark matter can thus oscillate from a purely asymmetric configuration into a symmetric mix of particles and antiparticles, allowing for pair-annihilation processes. Additionally, requiring efficient depletion of the primordial thermal (symmetric) component generically entails large annihilation rates. We show that unless some symmetry completely forbids dark matter particle-antiparticle mixing, asymmetric dark matter is effectively ruled out for a large range of masses, for almost any oscillation time scale shorter than the age of the Universe. PMID:22304253

  19. Asymmetric dark matter in braneworld cosmology

    Energy Technology Data Exchange (ETDEWEB)

    Meehan, Michael T.; Whittingham, Ian B., E-mail: Michael.Meehan@my.jcu.edu.au, E-mail: Ian.Whittingham@jcu.edu.au [School of Engineering and Physical Sciences, James Cook University, Townsville, 4811 Australia (Australia)

    2014-06-01

    We investigate the effect of a braneworld expansion era on the relic density of asymmetric dark matter. We find that the enhanced expansion rate in the early universe predicted by the Randall-Sundrum II (RSII) model leads to earlier particle freeze-out and an enhanced relic density. This effect has been observed previously by Okada and Seto (2004) for symmetric dark matter models and here we extend their results to the case of asymmetric dark matter. We also discuss the enhanced asymmetric annihilation rate in the braneworld scenario and its implications for indirect detection experiments.

  20. Regenerating a symmetry in asymmetric dark matter.

    Science.gov (United States)

    Buckley, Matthew R; Profumo, Stefano

    2012-01-01

    Asymmetric dark matter theories generically allow for mass terms that lead to particle-antiparticle mixing. Over the age of the Universe, dark matter can thus oscillate from a purely asymmetric configuration into a symmetric mix of particles and antiparticles, allowing for pair-annihilation processes. Additionally, requiring efficient depletion of the primordial thermal (symmetric) component generically entails large annihilation rates. We show that unless some symmetry completely forbids dark matter particle-antiparticle mixing, asymmetric dark matter is effectively ruled out for a large range of masses, for almost any oscillation time scale shorter than the age of the Universe.

  1. Asymmetric Dark Matter and Effective Operators

    CERN Document Server

    Buckley, Matthew R

    2011-01-01

    In order to annihilate in the early Universe to levels well below the measured dark matter density, asymmetric dark matter must possess large couplings to the Standard Model. In this paper, we consider effective operators which allow asymmetric dark matter to annihilate into quarks. In addition to a bound from requiring sufficient annihilation, the energy scale of such operators can be constrained by limits from direct detection and monojet searches at colliders. We show that the allowed parameter space for these operators is highly constrained, leading to non-trivial requirements that any model of asymmetric dark matter must satisfy.

  2. Nanostructured Perovskite LaCo1-xMnxO3 as Bifunctional Catalysts for Rechargeable Metal-Air Batteries

    Science.gov (United States)

    Ge, Xiaoming; Li, Bing; Wuu, Delvin; Sumboja, Afriyanti; An, Tao; Hor, T. S. Andy; Zong, Yun; Liu, Zhaolin

    2015-09-01

    Bifunctional catalyst that is active for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is one of the most important components of rechargeable metal-air batteries. Nanostructured perovskite bifunctional catalysts comprising La, Co and Mn(LaCo1-xMnxO3, LCMO) are synthesized by hydrothermal methods. The morphology, structure and electrochemical activity of the perovskite bifunctional catalysts are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and rotating disk electrode (RDE) techniques. Nanorod, nanodisc and nanoparticle are typical morphologies of LCMO. The electrocatalytic activity of LCMO is significantly improved by the addition of conductive materials such as carbon nanotube. To demonstrate the practical utilization, LCMO in the composition of LaCo0.8Mn0.2O3(LCMO82) is used as air cathode catalysts for rechargeable zinc-air batteries. The battery prototype can sustain 470 h or 40 discharge-charge cycles equivalent.

  3. Exhaust aftertreatment using plasma-assisted catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Penetrante, B

    2000-01-20

    In the field of catalysis, one application that has been classified as a breakthrough technology is the catalytic reduction of NO{sub x} in oxygen-rich environments using hydrocarbons. This breakthrough will require dramatic improvements in both catalyst and engine technology, but the benefits will be substantial for energy efficiency and a cleaner environment. Engine and automobile companies are placing greater emphasis on the diesel engine because of its potential for saving fuel resources and reducing CO{sub 2} emissions. The modern direct-injection diesel engine offers demonstrated fuel economy advantages unmatched by any other commercially-viable engine. The main drawback of diesel engines is exhaust emissions. A modification of existing oxidation catalyst/engine technology is being used to address the CO, hydrocarbon and particulates. However, no satisfactory solution currently exists for NO{sub x}. Diesel engines operate under net oxidizing conditions, thus rendering conventional three-way catalytic converters ineffective for the controlling the NO{sub x} emission. NO{sub x} reduction catalysts, using ammonia as a reductant, do exist for oxygen-rich exhausts; however, for transportation applications, the use of on-board hydrocarbon fuels is a more feasible, cost-effective, and environmentally-sound approach. Selective catalytic reduction (SCR) by hydrocarbons is one of the leading catalytic aftertreatment technologies for the reduction of NO{sub x} in lean-burn engine exhaust (often referred to as lean-NO{sub x}). The objective is to chemically reduce the pollutant molecules of NO{sub x} to benign molecules such as N{sub 2}. Aftertreatment schemes have focused a great deal on the reduction of NO because the NO{sub x} in engine exhaust is composed primarily of NO. Recent studies, however, have shown that the oxidation of NO to NO{sub 2} serves an important role in enhancing the efficiency for reduction of NO{sub x} to N{sub 2}. It has become apparent that

  4. Center for Catalysis at Iowa State University

    Energy Technology Data Exchange (ETDEWEB)

    Kraus, George A.

    2006-10-17

    The overall objective of this proposal is to enable Iowa State University to establish a Center that enjoys world-class stature and eventually enhances the economy through the transfer of innovation from the laboratory to the marketplace. The funds have been used to support experimental proposals from interdisciplinary research teams in areas related to catalysis and green chemistry. Specific focus areas included: • Catalytic conversion of renewable natural resources to industrial materials • Development of new catalysts for the oxidation or reduction of commodity chemicals • Use of enzymes and microorganisms in biocatalysis • Development of new, environmentally friendly reactions of industrial importance These focus areas intersect with barriers from the MYTP draft document. Specifically, section 2.4.3.1 Processing and Conversion has a list of bulleted items under Improved Chemical Conversions that includes new hydrogenation catalysts, milder oxidation catalysts, new catalysts for dehydration and selective bond cleavage catalysts. Specifically, the four sections are: 1. Catalyst development (7.4.12.A) 2. Conversion of glycerol (7.4.12.B) 3. Conversion of biodiesel (7.4.12.C) 4. Glucose from starch (7.4.12.D) All funded projects are part of a soybean or corn biorefinery. Two funded projects that have made significant progress toward goals of the MYTP draft document are: Catalysts to convert feedstocks with high fatty acid content to biodiesel (Kraus, Lin, Verkade) and Conversion of Glycerol into 1,3-Propanediol (Lin, Kraus). Currently, biodiesel is prepared using homogeneous base catalysis. However, as producers look for feedstocks other than soybean oil, such as waste restaurant oils and rendered animal fats, they have observed a large amount of free fatty acids contained in the feedstocks. Free fatty acids cannot be converted into biodiesel using homogeneous base-mediated processes. The CCAT catalyst system offers an integrated and cooperative catalytic

  5. Kinetic evolutionary behavior of catalysis-select migration

    Science.gov (United States)

    Wu, Yuan-Gang; Lin, Zhen-Quan; Ke, Jian-Hong

    2012-06-01

    We propose a catalysis-select migration driven evolution model of two-species (A- and B-species) aggregates, where one unit of species A migrates to species B under the catalysts of species C, while under the catalysts of species D the reaction will become one unit of species B migrating to species A. Meanwhile the catalyst aggregates of species C perform self-coagulation, as do the species D aggregates. We study this catalysis-select migration driven kinetic aggregation phenomena using the generalized Smoluchowski rate equation approach with C species catalysis-select migration rate kernel K(k;i,j) = Kkij and D species catalysis-select migration rate kernel J(k;i,j)= Jkij. The kinetic evolution behaviour is found to be dominated by the competition between the catalysis-select immigration and emigration, in which the competition is between JD0 and KC0 (D0 and C0 are the initial numbers of the monomers of species D and C, respectively). When JD0 -KC0 > 0, the aggregate size distribution of species A satisfies the conventional scaling form and that of species B satisfies a modified scaling form. And in the case of JD0-KC0 0 case.

  6. Kinetic evolutionary behavior of catalysis-select migration

    Institute of Scientific and Technical Information of China (English)

    Wu Yuan-Gang; Lin Zhen-Quan; Ke Jian-Hong

    2012-01-01

    We propose a catalysis-select migration driven evolution model of two-species (A- and B-species) aggregates,where one unit of species A migrates to species B under the catalysts of species C,while under the catalysts of species D the reaction will become one unit of species B migrating to species A.Meanwhile the catalyst aggregates of species C perform self-coagulation,as do the species D aggregates.We study this catalysis-select migration driven kinetic aggregation phenomena using the generalized Smoluchowski rate equation approach with C species catalysis-select migration rate kernel K(k;i,j) =Kkij and D species catalysis-select migration rate kernel J(k;i,j) =Jkij.The kinetic evolution behaviour is found to be dominated by the competition between the catalysis-select immigration and emigration,in which the competition is between JD0 and KC0 (D0 and C0 are the initial numbers of the monomers of species D and C,respectively).When JD0 - KC0 > 0,the aggregate size distribution of species A satisfies the conventional scaling form and that of species B satisfies a modified scaling form.And in the case of JDo - KCo < 0,species A and B exchange their aggregate size distributions as in the above JD0 - KC0 > 0 case.

  7. Kinetic evolutionary behavior of catalysis-select migration

    International Nuclear Information System (INIS)

    We propose a catalysis-select migration driven evolution model of two-species (A- and B-species) aggregates, where one unit of species A migrates to species B under the catalysts of species C, while under the catalysts of species D the reaction will become one unit of species B migrating to species A. Meanwhile the catalyst aggregates of species C perform self-coagulation, as do the species D aggregates. We study this catalysis-select migration driven kinetic aggregation phenomena using the generalized Smoluchowski rate equation approach with C species catalysis-select migration rate kernel K(k;i,j) = Kkij and D species catalysis-select migration rate kernel J(k;i,j)= Jkij. The kinetic evolution behaviour is found to be dominated by the competition between the catalysis-select immigration and emigration, in which the competition is between JD0 and KC0 (D0 and C0 are the initial numbers of the monomers of species D and C, respectively). When JD0 −KC0 > 0, the aggregate size distribution of species A satisfies the conventional scaling form and that of species B satisfies a modified scaling form. And in the case of JD0−KC0 0−KC0 > 0 case. (interdisciplinary physics and related areas of science and technology)

  8. Inverse Magnetic Catalysis in Bottom-Up Holographic QCD

    CERN Document Server

    Evans, Nick; Scott, Marc

    2016-01-01

    We explore the effect of magnetic field on chiral condensation in QCD via a simple bottom up holographic model which inputs QCD dynamics through the running of the anomalous dimension of the quark bilinear. Bottom up holography is a form of effective field theory and we use it to explore the dependence on the coefficients of the two lowest order terms linking the magnetic field and the quark condensate. In the massless theory, we identify a region of parameter space where magnetic catalysis occurs at zero temperature but inverse magnetic catalysis at temperatures of order the thermal phase transition. The model shows similar non-monotonic behaviour in the condensate with B at intermediate T as the lattice data. This behaviour is due to the separation of the meson melting and chiral transitions in the holographic framework. The introduction of quark mass raises the scale of B where inverse catalysis takes over from catalysis until the inverse catalysis lies outside the regime of validity of the effective descr...

  9. Catalysis-by-design impacts assessment

    Energy Technology Data Exchange (ETDEWEB)

    Fassbender, L L; Young, J K [Pacific Northwest Lab., Richland, WA (USA); Sen, R K [Sen (R.K.) and Associates, Washington, DC (USA)

    1991-05-01

    Catalyst researchers have always recognized the need to develop a detailed understanding of the mechanisms of catalytic processes, and have hoped that it would lead to developing a theoretical predictive base to guide the search for new catalysts. This understanding allows one to develop a set of hierarchical models, from fundamental atomic-level ab-initio models to detailed engineering simulations of reactor systems, to direct the search for optimized, efficient catalyst systems. During the last two decades, the explosions of advanced surface analysis techniques have helped considerably to develop the building blocks for understanding various catalytic reactions. An effort to couple these theoretical and experimental advances to develop a set of hierarchical models to predict the nature of catalytic materials is a program entitled Catalysis-by-Design (CRD).'' In assessing the potential impacts of CBD on US industry, the key point to remember is that the value of the program lies in developing a novel methodology to search for new catalyst systems. Industrial researchers can then use this methodology to develop proprietary catalysts. Most companies involved in catalyst R D have two types of ongoing projects. The first type, what we call market-driven R D,'' are projects that support and improve upon a company's existing product lines. Project of the second type, technology-driven R D,'' are longer term, involve the development of totally new catalysts, and are initiated through scientists' research ideas. The CBD approach will impact both types of projects. However, this analysis indicates that the near-term impacts will be on market-driven'' projects. The conclusions and recommendations presented in this report were obtained by the authors through personal interviews with individuals involved in a variety of industrial catalyst development programs and through the three CBD workshops held in the summer of 1989. 34 refs., 7 figs., 7 tabs.

  10. High-Spin Cobalt Hydrides for Catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Patrick L. [Yale University

    2013-08-29

    Organometallic chemists have traditionally used catalysts with strong-field ligands that give low-spin complexes. However, complexes with a weak ligand field have weaker bonds and lower barriers to geometric changes, suggesting that they may lead to more rapid catalytic reactions. Developing our understanding of high-spin complexes requires the use of a broader range of spectroscopic techniques, but has the promise of changing the mechanism and/or selectivity of known catalytic reactions. These changes may enable the more efficient utilization of chemical resources. A special advantage of cobalt and iron catalysts is that the metals are more abundant and cheaper than those currently used for major industrial processes that convert unsaturated organic molecules and biofeedstocks into useful chemicals. This project specifically evaluated the potential of high-spin cobalt complexes for small-molecule reactions for bond rearrangement and cleavage reactions relevant to hydrocarbon transformations. We have learned that many of these reactions proceed through crossing to different spin states: for example, high-spin complexes can flip one electron spin to access a lower-energy reaction pathway for beta-hydride elimination. This reaction enables new, selective olefin isomerization catalysis. The high-spin cobalt complexes also cleave the C-O bond of CO2 and the C-F bonds of fluoroarenes. In each case, the detailed mechanism of the reaction has been determined. Importantly, we have discovered that the cobalt catalysts described here give distinctive selectivities that are better than known catalysts. These selectivities come from a synergy between supporting ligand design and electronic control of the spin-state crossing in the reactions.

  11. Twin Higgs Asymmetric Dark Matter.

    Science.gov (United States)

    García García, Isabel; Lasenby, Robert; March-Russell, John

    2015-09-18

    We study asymmetric dark matter (ADM) in the context of the minimal (fraternal) twin Higgs solution to the little hierarchy problem, with a twin sector with gauged SU(3)^{'}×SU(2)^{'}, a twin Higgs doublet, and only third-generation twin fermions. Naturalness requires the QCD^{'} scale Λ_{QCD}^{'}≃0.5-20  GeV, and that t^{'} is heavy. We focus on the light b^{'} quark regime, m_{b^{'}}≲Λ_{QCD}^{'}, where QCD^{'} is characterized by a single scale Λ_{QCD}^{'} with no light pions. A twin baryon number asymmetry leads to a successful dark matter (DM) candidate: the spin-3/2 twin baryon, Δ^{'}∼b^{'}b^{'}b^{'}, with a dynamically determined mass (∼5Λ_{QCD}^{'}) in the preferred range for the DM-to-baryon ratio Ω_{DM}/Ω_{baryon}≃5. Gauging the U(1)^{'} group leads to twin atoms (Δ^{'}-τ^{'}[over ¯] bound states) that are successful ADM candidates in significant regions of parameter space, sometimes with observable changes to DM halo properties. Direct detection signatures satisfy current bounds, at times modified by dark form factors.

  12. Why Do Nucleosomes Unwrap Asymmetrically?

    Science.gov (United States)

    de Bruin, Lennart; Tompitak, Marco; Eslami-Mossallam, Behrouz; Schiessel, Helmut

    2016-07-01

    Nucleosomes, DNA spools with a protein core, engage about three-quarters of eukaryotic DNA and play a critical role in chromosomal processes, ranging from gene regulation, recombination, and replication to chromosome condensation. For more than a decade, micromanipulation experiments where nucleosomes are put under tension, as well as the theoretical interpretations of these experiments, have deepened our understanding of the stability and dynamics of nucleosomes. Here we give a theoretical explanation for a surprising new experimental finding: nucleosomes wrapped onto the 601 positioning sequence (the sequence used in most laboratories) respond highly asymmetrically to external forces by always unwrapping from the same end. Using a computational nucleosome model, we show that this asymmetry can be explained by differences in the DNA mechanics of two very short stretches on the wrapped DNA portion. Our finding suggests that the physical properties of nucleosomes, here the response to forces, can be tuned locally by the choice of the underlying base-pair sequence. This leads to a new view of nucleosomes: a physically highly varied set of DNA-protein complexes whose properties can be tuned on evolutionary time scales to their specific function in the genomic context. PMID:26991771

  13. Twin Higgs Asymmetric Dark Matter

    CERN Document Server

    García, Isabel García; March-Russell, John

    2015-01-01

    We study Asymmetric Dark Matter (ADM) in the context of the minimal (Fraternal) Twin Higgs solution to the little hierarchy problem, with a twin sector with gauged $SU(3)' \\times SU(2)'$, a twin Higgs, and only third generation twin fermions. Naturalness requires the QCD$^\\prime$ scale $\\Lambda'_{\\rm QCD} \\simeq 0.5 - 20 \\ {\\rm GeV}$, and $t'$ to be heavy. We focus on the light $b'$ quark regime, $m_{b'} \\lesssim \\Lambda'_{\\rm QCD}$, where QCD$^\\prime$ is characterised by a single scale $\\Lambda'_{\\rm QCD}$ with no light pions. A twin baryon number asymmetry leads to a successful DM candidate: the spin-3/2 twin baryon, $\\Delta' \\sim b'b'b'$, with a dynamically determined mass ($\\sim 5 \\Lambda'_{\\rm QCD}$) in the preferred range for the DM-to-baryon ratio $\\Omega_{\\rm DM}/\\Omega_{\\rm baryon} \\simeq 5$. Gauging the $U(1)'$ group leads to twin atoms ($\\Delta'$ - $\\bar {\\tau'}$ bound states) that are successful ADM candidates in significant regions of parameter space, sometimes with observable changes to DM halo ...

  14. Asymmetric total synthesis of vindoline.

    Science.gov (United States)

    Kato, Daisuke; Sasaki, Yoshikazu; Boger, Dale L

    2010-03-24

    A concise asymmetric total synthesis of (-)-vindoline (1) is detailed based on a tandem intramolecular [4+2]/[3+2] cycloaddition cascade of a 1,3,4-oxadiazole inspired by the natural product structure, in which the tether linking the initiating dienophile and oxadiazole bears a chiral substituent that controls the facial selectivity of the initiating Diels-Alder reaction and sets absolute stereochemistry of the remaining six stereocenters in the cascade cycloadduct. This key reaction introduces three rings and four C-C bonds central to the pentacyclic ring system setting all six stereocenters and introducing essentially all the functionality found in the natural product in a single step. Implementation of the approach also required the development of a unique ring expansion reaction to provide a six-membered ring suitably functionalized for introduction of the Delta (6, 7)-double bond found in the core structure of vindoline and defined our use of a protected hydroxymethyl group as the substituent used to control the stereochemical course of the cycloaddition cascade.

  15. Chaos suppression through asymmetric coupling

    Science.gov (United States)

    Bragard, J.; Vidal, G.; Mancini, H.; Mendoza, C.; Boccaletti, S.

    2007-12-01

    We study pairs of identical coupled chaotic oscillators. In particular, we have used Roessler (in the funnel and no funnel regimes), Lorenz, and four-dimensional chaotic Lotka-Volterra models. In all four of these cases, a pair of identical oscillators is asymmetrically coupled. The main result of the numerical simulations is that in all cases, specific values of coupling strength and asymmetry exist that render the two oscillators periodic and synchronized. The values of the coupling strength for which this phenomenon occurs is well below the previously known value for complete synchronization. We have found that this behavior exists for all the chaotic oscillators that we have used in the analysis. We postulate that this behavior is presumably generic to all chaotic oscillators. In order to complete the study, we have tested the robustness of this phenomenon of chaos suppression versus the addition of some Gaussian noise. We found that chaos suppression is robust for the addition of finite noise level. Finally, we propose some extension to this research.

  16. Force on an Asymmetric Capacitor

    CERN Document Server

    Bahder, T B; Bahder, Thomas B.; Fazi, Chris

    2002-01-01

    When a high voltage (~30 kV) is applied to a capacitor whose electrodes have different physical dimensions, the capacitor experiences a net force toward the smaller electrode (Biefeld-Brown effect). We have verified this effect by building four capacitors of different shapes. The effect may have applications to vehicle propulsion and dielectric pumps. We review the history of this effect briefly through the history of patents by Thomas Townsend Brown. At present, the physical basis for the Biefeld-Brown effect is not understood. The order of magnitude of the net force on the asymmetric capacitor is estimated assuming two different mechanisms of charge conduction between its electrodes: ballistic ionic wind and ionic drift. The calculations indicate that ionic wind is at least three orders of magnitude too small to explain the magnitude of the observed force on the capacitor. The ionic drift transport assumption leads to the correct order of magnitude for the force, however, it is difficult to see how ionic dr...

  17. Twin Higgs Asymmetric Dark Matter.

    Science.gov (United States)

    García García, Isabel; Lasenby, Robert; March-Russell, John

    2015-09-18

    We study asymmetric dark matter (ADM) in the context of the minimal (fraternal) twin Higgs solution to the little hierarchy problem, with a twin sector with gauged SU(3)^{'}×SU(2)^{'}, a twin Higgs doublet, and only third-generation twin fermions. Naturalness requires the QCD^{'} scale Λ_{QCD}^{'}≃0.5-20  GeV, and that t^{'} is heavy. We focus on the light b^{'} quark regime, m_{b^{'}}≲Λ_{QCD}^{'}, where QCD^{'} is characterized by a single scale Λ_{QCD}^{'} with no light pions. A twin baryon number asymmetry leads to a successful dark matter (DM) candidate: the spin-3/2 twin baryon, Δ^{'}∼b^{'}b^{'}b^{'}, with a dynamically determined mass (∼5Λ_{QCD}^{'}) in the preferred range for the DM-to-baryon ratio Ω_{DM}/Ω_{baryon}≃5. Gauging the U(1)^{'} group leads to twin atoms (Δ^{'}-τ^{'}[over ¯] bound states) that are successful ADM candidates in significant regions of parameter space, sometimes with observable changes to DM halo properties. Direct detection signatures satisfy current bounds, at times modified by dark form factors. PMID:26430985

  18. Modeling of asymmetrical boost converters

    Directory of Open Access Journals (Sweden)

    Eliana Isabel Arango Zuluaga

    2014-03-01

    Full Text Available The asymmetrical interleaved dual boost (AIDB is a fifth-order DC/DC converter designed to interface photovoltaic (PV panels. The AIDB produces small current harmonics to the PV panels, reducing the power losses caused by the converter operation. Moreover, the AIDB provides a large voltage conversion ratio, which is required to step-up the PV voltage to the large dc-link voltage used in grid-connected inverters. To reject irradiance and load disturbances, the AIDB must be operated in a closed-loop and a dynamic model is required. Given that the AIDB converter operates in Discontinuous Conduction Mode (DCM, classical modeling approaches based on Continuous Conduction Mode (CCM are not valid. Moreover, classical DCM modeling techniques are not suitable for the AIDB converter. Therefore, this paper develops a novel mathematical model for the AIDB converter, which is suitable for control-pur-poses. The proposed model is based on the calculation of a diode current that is typically disregarded. Moreover, because the traditional correction to the second duty cycle reported in literature is not effective, a new equation is designed. The model accuracy is contrasted with circuital simulations in time and frequency domains, obtaining satisfactory results. Finally, the usefulness of the model in control applications is illustrated with an application example.

  19. Hydrodesulfurization on Transition Metal Catalysts: Elementary Steps of C-S Bond Activation and Consequences of Bifunctional Synergies

    Science.gov (United States)

    Yik, Edwin Shyn-Lo

    The presence of heteroatoms (e.g. S, N) in crude oil poses formidable challenges in petroleum refining processes as a result of their irreversible binding on catalytically active sites at industrially relevant conditions. With increasing pressures from legislation that continues to lower the permissible levels of sulfur content in fuels, hydrodesulfurization (HDS), the aptly named reaction for removing heteroatoms from organosulfur compounds, has become an essential feedstock pretreatment step to remove deleterious species from affecting downstream processing. Extensive research in the area has identified the paradigm catalysts for desulfurization; MoSx or WSx, promoted with Co or Ni metal; however, despite the vast library of both empirical and fundamental studies, a clear understanding of site requirements, the elementary steps of C-S hydrogenolysis, and the properties that govern HDS reactivity and selectivity have been elusive. While such a lack of rigorous assessments has not prevented technological advancements in the field of HDS catalysis, fundamental interpretations can inform rational catalyst and process design, particularly in light of new requirements for "deep" desulfurization and in the absence of significant hydrotreatment catalyst developments in recent decades. We report HDS rates of thiophene, which belongs to a class of compounds that are most resistant to sulfur removal (i.e. substituted alkyldibenzothiophenes), over a range of industrially relevant temperatures and pressures, measured at differential conditions and therefore revealing their true kinetic origins. These rates, normalized by the number of exposed metal atoms, on various SiO 2-supported, monometallic transition metals (Re, Ru, Pt), range several orders of magnitude. Under relevant HDS conditions, Pt and Ru catalysts form a layer of chemisorbed sulfur on surfaces of a metallic bulk, challenging reports that assume the latter exists as its pyrite sulfide phase during reaction. While

  20. Biodiesel forming reactions using heterogeneous catalysis

    Science.gov (United States)

    Liu, Yijun

    Biodiesel synthesis from biomass provides a means for utilizing effectively renewable resources, a way to convert waste vegetable oils and animal fats to a useful product, a way to recycle carbon dioxide for a combustion fuel, and production of a fuel that is biodegradable, non-toxic, and has a lower emission profile than petroleum-diesel. Free fatty acid (FFA) esterification and triglyceride (TG) transesterification with low molecular weight alcohols constitute the synthetic routes to prepare biodiesel from lipid feedstocks. This project was aimed at developing a better understanding of important fundamental issues involved in heterogeneous catalyzed biodiesel forming reactions using mainly model compounds, representing part of on-going efforts to build up a rational base for assay, design, and performance optimization of solid acids/bases in biodiesel synthesis. As FFA esterification proceeds, water is continuously formed as a byproduct and affects reaction rates in a negative manner. Using sulfuric acid (as a catalyst) and acetic acid (as a model compound for FFA), the impact of increasing concentrations of water on acid catalysis was investigated. The order of the water effect on reaction rate was determined to be -0.83. Sulfuric acid lost up to 90% activity as the amount of water present increased. The nature of the negative effect of water on esterification was found to go beyond the scope of reverse hydrolysis and was associated with the diminished acid strength of sulfuric acid as a result of the preferential solvation by water molecules of its catalytic protons. The results indicate that as esterification progresses and byproduct water is produced, deactivation of a Bronsted acid catalyst like H2SO4 occurs. Using a solid composite acid (SAC-13) as an example of heterogeneous catalysts and sulfuric acid as a homogeneous reference, similar reaction inhibition by water was demonstrated for homogeneous and heterogeneous catalysis. This similarity together with

  1. An efficient bifunctional electrocatalyst for water splitting based on cobalt phosphide

    Science.gov (United States)

    Yang, Libin; Qi, Honglan; Zhang, Chengxiao; Sun, Xuping

    2016-06-01

    The development of highly efficient electrocatalysts for water splitting is critical for various renewable-energy technologies. In this letter, we demonstrate a cobalt phosphide nanowire array grown on a Ti mesh (CoP/TM) behaving as a bifunctional electrocatalyst for water splitting. The CoP/TM electrode delivers 10 mA cm-2 at an overpotential of 72 mV for the hydrogen evolution reaction (HER) and 310 mV for the oxygen evolution reaction (OER) in 1.0 M KOH. Furthermore, its corresponding two-electrode alkaline electrolyzer displays 10 mA cm-2 at 1.64 V.

  2. MoO3 nanoparticle anchored graphene as bifunctional agent for water purification

    Science.gov (United States)

    Lahan, Homen; Roy, Raju; Namsa, Nima D.; Das, Shyamal K.

    2016-10-01

    We report here a facile one step hydrothermal method to anchor MoO3 nanoparticles in graphene. The bifunctionality of graphene-MoO3 nanoparticles is demonstrated via dye adsorption and antibacterial activities. The nanocomposite showed excellent adsorption of methylene blue, a cationic dye, from water compared to pristine MoO3 and graphene. However, it showed negligible adsorption of methyl orange, an anionic dye. Again, the graphene-MoO3 nanoparticles exhibited bacteriostatic property against both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria.

  3. Bifunctional Organic Polymeric Catalysts with a Tunable Acid-Base Distance and Framework Flexibility

    Science.gov (United States)

    Chen, Huanhui; Wang, Yanan; Wang, Qunlong; Li, Junhui; Yang, Shiqi; Zhu, Zhirong

    2014-09-01

    Acid-base bifunctional organic polymeric catalysts were synthesized with tunable structures. we demonstrated two synthesis approaches for structural fine-tune. In the first case, the framework flexibility was tuned by changing the ratio of rigid blocks to flexible blocks within the polymer framework. In the second case, we precisely adjusted the acid-base distance by distributing basic monomers to be adjacent to acidic monomers, and by changing the chain length of acidic monomers. In a standard test reaction for the aldol condensation of 4-nitrobenzaldehyde with acetone, the catalysts showed good reusability upon recycling and maintained relatively high conversion percentage.

  4. Tunable catalytic properties of bi-functional mixed oxides in ethanol conversion to high value compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ramasamy, Karthikeyan K.; Gray, Michel J.; Job, Heather M.; Smith, Colin D.; Wang, Yong

    2016-04-10

    tA highly versatile ethanol conversion process to selectively generate high value compounds is pre-sented here. By changing the reaction temperature, ethanol can be selectively converted to >C2alcohols/oxygenates or phenolic compounds over hydrotalcite derived bi-functional MgO–Al2O3cata-lyst via complex cascade mechanism. Reaction temperature plays a role in whether aldol condensationor the acetone formation is the path taken in changing the product composition. This article containsthe catalytic activity comparison between the mono-functional and physical mixture counterpart to thehydrotalcite derived mixed oxides and the detailed discussion on the reaction mechanisms.

  5. Cobalt nanoparticles embedded in N-doped carbon as an efficient bifunctional electrocatalyst for oxygen reduction and evolution reactions

    Science.gov (United States)

    Su, Yunhe; Zhu, Yihua; Jiang, Hongliang; Shen, Jianhua; Yang, Xiaoling; Zou, Wenjian; Chen, Jianding; Li, Chunzhong

    2014-11-01

    Cobalt based catalysts are promising bifunctional electrocatalysts for both oxygen reduction and oxygen evolution reactions (ORR and OER) in unitized regenerative fuel cells (URFCs) operating with alkaline electrolytes. Here we report a hybrid composite of cobalt nanoparticles embedded in nitrogen-doped carbon (Co/N-C) via a solvothermal carbonization strategy. With the synergistic effect arising from the N-doped carbon and cobalt nanoparticles in the composite, the Co/N-C hybrid catalyst exhibits highly efficient bifunctional catalytic activity and excellent stability toward both ORR and OER. The ΔE (oxygen electrode activity parameter for judging the overall electrocatalytic activity of a bifunctional electrocatalyst) value for Co/N-C is 0.859 V, which is smaller than those of Pt/C and most of the non-precious metal catalysts in previous studies. Furthermore, the Co/N-C composite also shows better bifunctional catalytic activity than its oxidative counterparts, which could be attributed to the high specific surface area and the efficient charge transfer ability of the composite, as well as the good synergistic effect between N-doped carbon and the Co nanoparticles in the Co/N-C composite.Cobalt based catalysts are promising bifunctional electrocatalysts for both oxygen reduction and oxygen evolution reactions (ORR and OER) in unitized regenerative fuel cells (URFCs) operating with alkaline electrolytes. Here we report a hybrid composite of cobalt nanoparticles embedded in nitrogen-doped carbon (Co/N-C) via a solvothermal carbonization strategy. With the synergistic effect arising from the N-doped carbon and cobalt nanoparticles in the composite, the Co/N-C hybrid catalyst exhibits highly efficient bifunctional catalytic activity and excellent stability toward both ORR and OER. The ΔE (oxygen electrode activity parameter for judging the overall electrocatalytic activity of a bifunctional electrocatalyst) value for Co/N-C is 0.859 V, which is smaller than those

  6. Preparation of Pt/Irx(IrO2)10 - x bifunctional oxygen catalyst for unitized regenerative fuel cell

    Science.gov (United States)

    Kong, Fan-Dong; Zhang, Sheng; Yin, Ge-Ping; Zhang, Na; Wang, Zhen-Bo; Du, Chun-Yu

    2012-07-01

    Bifunctional Pt/Irx(IrO2)10 - x (x oxygen reduction reaction (ORR) (21.71 mA mg-1 at 0.85 V). Meanwhile, considerably high activity towards oxygen evolution reaction (OER) (42.35 mA mg-1 at 1.55 V) is also observed for Pt/Ir3(IrO2)7 catalyst. Kinetic analyses indicate that ORR on Pt/Ir3(IrO2)7 catalyst follows four-electron mechanism. This work opens a new way to fabricate efficient bifunctional oxygen catalyst for URFC.

  7. A central role for bifunctional aspartate/prephenate aminotransferase in the biosynthesis of amino acids in plant plastids.

    OpenAIRE

    El-Azaz, Jorge; Cánovas, Francisco M.; de la Torre, Fernando; Ávila, Concepción

    2014-01-01

    A central role for bifunctional aspartate/prephenate aminotransferase in the biosynthesis of amino acids in plant plastids. Fernando de la Torre, Jorge El-Azaz, Concepción Ávila, Francisco M. Cánovas Departamento de Biología Molecular y Bioquímica. Universidad de Málaga. Bifunctional aspartate/prephenate aminotransferases (AAT/PAT) are plastid-located enzymes encoded by a single locus in all reported plants, which develop two different enzymatic activities: aspartate aminotransferas...

  8. Neurodegeneration in D-bifunctional protein deficiency: diagnostic clues and natural history using serial magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Aneal [University of Calgary, Department of Medical Genetics and Pediatrics, Alberta Children' s Hospital, Calgary, AB (Canada); Wei, Xing-Chang [University of Calgary, Department of Radiology, Alberta Children' s Hospital, Calgary, AB (Canada); Snyder, Floyd F. [Alberta Children' s Hospital, Biochemical Genetics Laboratory, Calgary, AB (Canada); Mah, Jean K. [University of Calgary, Division of Neurology, Department of Pediatrics, Calgary, AB (Canada); Waterham, Hans; Wanders, Ronald J.A. [University of Amsterdam, Academic Medical Center, Lab Genetic Metabolic Diseases, Amsterdam (Netherlands)

    2010-12-15

    We report serial neurodegenerative changes on neuroimaging in a rare peroxisomal disease called D-bifunctional protein deficiency. The pattern of posterior to anterior demyelination with white matter disease resembles X-linked adrenoleukodystrophy. We feel this case is important to (1) highlight that D-bifunctional protein deficiency should be considered in cases where the neuroimaging resembles X-linked adrenoleukodystrophy, (2) to show different stages of progression to help identify this disease using neuroimaging in children, and (3) to show that neuroimaging suggesting a leukodystrophy can warrant peroxisomal beta-oxidation studies in skin fibroblasts even when plasma very long chain fatty acids are normal. (orig.)

  9. NiCoMnO4: A Bifunctional Affinity Probe for His-Tagged Protein Purification and Phosphorylation Sites Recognition.

    Science.gov (United States)

    Qi, Xiaoyue; Chen, Long; Zhang, Chaoqun; Xu, Xinyuan; Zhang, Yiding; Bai, Yu; Liu, Huwei

    2016-07-27

    A bifunctional affinity probe NiCoMnO4 was designed and prepared with controllable morphology and size using facile methods. It was observed that the probe could be applied in His-tagged proteins purification and phosphopeptides enrichment simply through the buffer modulation. NiCoMnO4 particles showed satisfactory cycling performance for His-tagged proteins purification and broad pH-tolerance of loading buffer for phosphopeptides affinity. Therefore, a high-throughput, cost-effective, and efficient protein/peptide purification method was developed within 10 min based on the novel bifunctional affinity probe. PMID:27381638

  10. Asymmetric dense matter in holographic QCD

    Directory of Open Access Journals (Sweden)

    Shin Ik Jae

    2012-02-01

    Full Text Available We study asymmetric dense matter in holographic QCD.We construct asymmetric dense matter by considering two quark flavor branes with dierent quark masses in a D4/D6/D6 model. To calculate the symmetry energy in nuclear matter, we consider two quarks with equal masses and observe that the symmetry energy increases with the total charge showing the stiff dependence. This behavior is universal in the sense that the result is independent of parameters in the model. We also study strange (or hyperon matter with one light and one intermediate mass quarks. In addition to the vacuum properties of asymmetric matter, we calculate meson masses in asymmetric dense matter and discuss our results in the light of in-medium kaon masses.

  11. Massless sunset diagrams in finite asymmetric volumes

    CERN Document Server

    Niedermayer, Ferenc

    2016-01-01

    In this paper we present methods to compute massless sunset diagrams in finite asymmetric volumes in the framework of dimensional regularization and lattice regularization. We also consider 1-loop sums in both regularizations.

  12. Asymmetric cryptography based on wavefront sensing.

    Science.gov (United States)

    Peng, Xiang; Wei, Hengzheng; Zhang, Peng

    2006-12-15

    A system of asymmetric cryptography based on wavefront sensing (ACWS) is proposed for the first time to our knowledge. One of the most significant features of the asymmetric cryptography is that a trapdoor one-way function is required and constructed by analogy to wavefront sensing, in which the public key may be derived from optical parameters, such as the wavelength or the focal length, while the private key may be obtained from a kind of regular point array. The ciphertext is generated by the encoded wavefront and represented with an irregular array. In such an ACWS system, the encryption key is not identical to the decryption key, which is another important feature of an asymmetric cryptographic system. The processes of asymmetric encryption and decryption are formulized mathematically and demonstrated with a set of numerical experiments.

  13. Worst Asymmetrical Short-Circuit Current

    DEFF Research Database (Denmark)

    Arana Aristi, Iván; Holmstrøm, O; Grastrup, L;

    2010-01-01

    In a typical power plant, the production scenario and the short-circuit time were found for the worst asymmetrical short-circuit current. Then, a sensitivity analysis on the missing generator values was realized in order to minimize the uncertainty of the results. Afterward the worst asymmetrical...... short-circuit current was analyzed in order to compare the results with the allowable DC current component based in the IEC. Finally the normal operating condition for the power plant was modeled....

  14. An asymmetric pericyclic cascade approach to oxindoles

    OpenAIRE

    Richmond, Edward

    2014-01-01

    The research in this thesis describes an asymmetric pericyclic cascade approach to the synthesis of a range of enantioenriched oxindoles using enantiopure oxazolidine derived nitrones and disubstituted ketenes. Chapter 1 aims to place this work in the context of the literature, describing other commonly employed or state-of-the-art asymmetric approaches to oxindoles and related compounds. Examples of where these approaches have been used successfully in the total synthesis of related indol...

  15. Asymmetric Federalism in Russia: Cure or Poison?

    OpenAIRE

    Jorge Martinez-Vazquez

    2003-01-01

    In the early years of its existence, the Russian Federation adopted a system of differential treatment of its regions in order to cope with the great degree of diversity present in them. This paper examines the Russian Federation’s asymmetric federalism by evaluating the system’s role, significance and effects on the Federation’s development. The study incorporates a detailed description of the asymmetric federalism over time along with the benefits and costs incurred by its implementation. I...

  16. Asymmetric Membrane Osmotic Capsules for Terbutaline Sulphate

    OpenAIRE

    Gobade, N. G.; Marina Koland; K H Harish

    2012-01-01

    The aim of the present study was to design an asymmetric membrane capsule, an osmotic pump-based drug delivery system of ethyl cellulose for controlled release of terbutaline sulphate. asymmetric membrane capsules contains pore-forming water soluble additive, sorbitol in different concentrations in the capsule shell membrane, which after coming in contact with water, dissolves, resulting in an in situ formation of a microporous structure. The terbutaline sulphate is a β-adrenoreceptor agonist...

  17. Novel strategies for asymmetric hydrogenation reactions

    OpenAIRE

    Chen, Dianjun

    2011-01-01

    This thesis describes two novel possibilities for asymmetric hydrogenation: enantioselective hydrogenation using chiral ionic liquid systems and metal-free hydrogenation with boranes. In the first part, asymmetric hydrogenation systems using chiral ionic liquids in combination with racemic rhodium catalyst are presented. Enantioselectivities up to 69% ee were achieved in homogeneous Rh-catalyzed hydrogenation with tropos ligand (BIPHEP, sulfonated BIPHEP) in a proline derived cation chiral io...

  18. Asymmetric septal hypertrophy and hypothyroidism in children.

    OpenAIRE

    Altman, D I; Murray, J.; Milner, S.; Dansky, R; Levin, S. E.

    1985-01-01

    Any echocardiographic study of two children with hypothyroidism demonstrated the presence of asymmetric septal hypertrophy. One child died aged 11 months, and pronounced thickening of the interventricular septum was confirmed at necropsy. There was also hypertrophy of the left ventricular free wall. Histological examination showed only slight muscle fibre disarray, but there was striking vacuolation and hypertrophy of muscle fibres. In the second case, a child aged five years, the asymmetric ...

  19. Gold Nanoparticle-Biological Molecule Interactions and Catalysis

    Directory of Open Access Journals (Sweden)

    Jonathan G. Heddle

    2013-09-01

    Full Text Available This review gives a brief summary of the field of gold nanoparticle interactions with biological molecules, particularly those with possible catalytic relevance. Gold nanoparticles are well known as catalysts in organic chemistry but much is unknown regarding their potential as catalysts of reactions involving biological molecules such as protein and nucleic acids. Biological molecules may be the substrate for catalysis or, if they are the ligand coating the gold particle, may be the catalyst itself. In other cases biological molecules may form a template upon which gold nanoparticles can be precisely arrayed. As relatively little is currently known about the catalytic capabilities of gold nanoparticles in this area, this review will consider templating in general (including, but not restricted to, those which result in structures having potential as catalysts before going on to consider firstly catalysis by the gold nanoparticle itself followed by catalysis by ligands attached to gold nanoparticles, all considered with a focus on biological molecules.

  20. Catalysis induced by radiations; Catalisis inducida por radiaciones

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez B, J.; Gonzalez J, J. C., E-mail: jaime.jimenez@inin.gob.m [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2010-07-01

    In Mexico is generated a great quantity of residuals considered as dangerous, for its capacity of corrosion, reactivity, toxicity to the environment, inflammability and biological-infectious potential. It is important to mention that the toxic compounds cannot be discharged to the sewerage systems and much less to the receiving bodies of water. The usual treatment that receives the dangerous residuals is the incineration and the bordering. The incineration is an efficient form of treating the residuals, but it can be dioxins source and benzofurans, being the phenol and chloro phenol the precursors of these compounds. At the present time the radiolytic degradation of organic compounds has been broadly studied, especially the 4-chloro phenol and of same form the photo catalysis of organic compounds. However the combination of both processes, called radio catalysis is barely reported. In this work the results of the experiments realized for to degrade the 4-chloro phenol by means of radio catalysis are reported. (Author)

  1. Ceramics in Environmental Catalysis:Applications and Possibilities%Ceramics in Environmental Catalysis: Applications and Possibilities

    Institute of Scientific and Technical Information of China (English)

    Nitin LABHSETWAR; P.DOGGALI; S.RAYALU; R.YADAV; T.MISTUHASHI; H.HANEDA

    2012-01-01

    Environmental catalysis has been steadily growing because of the advances in its scientific and engineering aspects,as well as due to the new environmental challenges in the industrial era.The development of new catalysts and materials is essential for new technologies for various environmental applications.Ceramics play important roles in various environmental applications including the identification,monitoring,and quantification of pollutants and their control.Ceramics have important applications as sensors and photocatalysts,and they are extensively used as catalyst carriers and supports.Many ceramics are being explored as catalysts for pollution control applications.Their low cost,thermal and chemical stability,and capability of being tailored make them especially attractive for pollution control applications.Although a wide variety of materials have been developed as catalyst supports,this area is still of interest with new or modified catalyst supports being frequently reported.It is of equal importance to develop new or modified processes for the loading of catalysts on specific supports.Applications like chemical looping combustion (CLC) and other catalytic combustion processes are raising the demands to a new scale.We have been working on the development of both new and modified support materials,including mesoporous materials without structural order for possible applications in CLC and other catalytic reactions.Successful attempts have been made in the modification of conventional γ-Al2O3 and improved synthesis processes for supporting perovskite type catalysts.Our research on environmental catalysis applications of ceramic materials and processes are also briefly discussed.

  2. Role of catalysis in sustainable production of synthetic elastomers

    Indian Academy of Sciences (India)

    Vivek K Srivastava; Madhuchhanda Maiti; Ganesh C Basak; Raksh V Jasra

    2014-03-01

    Elastomer business plays a significant role in the transportation industry. In fact, elastomers make the world move. Due to limited availability of natural rubber, synthetic elastomers bridge the gap between demand and supply in today’s growing tyre and automobile industry.With more than ∼10000 KTA total world productions, the impact of synthetic elastomer business cannot be overlooked. The need of synthetic elastomers for tyre and automobile industries is stringently specific. Catalysis plays an inevitable role in achieving the growing demand of specific synthetic elastomers. The present study will describe how catalysis plays a significant role in the sustainable development of elastomers with special reference to polybutadiene rubber.

  3. New and future developments in catalysis activation of carbon dioxide

    CERN Document Server

    Suib, Steven L

    2013-01-01

    New and Future Developments in Catalysis is a package of books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes. This volume presents a complete picture of all carbon dioxide (CO2) sources, outlines the environmental concerns regarding CO2, and critica

  4. A Possible Macroscopic-Photo-Catalysis Mechanism in Solar Furnace

    Institute of Scientific and Technical Information of China (English)

    HO Tsohsiu; QING Cheng-Rui; CHEN Ying-Tian

    2011-01-01

    Based on the experimental results of Chen et al.to use the solar furnace and medium frequency induction furnace to extract boron impurity from metallurgical silicon, we propose a strong radiation catalysis mechanism to explain the difference of reaction rates in these two furnaces.The postulate assuming the photons striking on the material not only increase the thermal energy of the molecules of reactants but also lower down the energy barrier of the reaction to speed up the chemical reaction.It is believed the photon catalysis mechanism is universall in most of high temperature chemical reactions and looking forward to more evidences for the postulate proposed in this article.

  5. KCC1: First Nanoparticle developed by KAUST Catalysis Center

    KAUST Repository

    Basset, Jean-Marie

    2010-08-01

    KCC1 is the first Nanoparticle developed by KAUST Catalysis Center. Director of KAUST Catalysis Center, Dr. Jean-Marie Basset, Senior Research Scientist at KCC, Dr. Vivek Polshettiwar, and Dr. Dongkyu Cha of the Advanced Nanofabrication Imaging & Characterization Core Laboratory discuss the details of this recent discovery. This video was produced by KAUST Visualization Laboratory and KAUST Technology Transfer and Innovation - Terence McElwee, Director, Technology Transfer and Innovation - IP@kaust.edu.sa This technology is part of KAUST\\'s technology commercialization program that seeks to stimulate development and commercial use of KAUST-developed technologies. For more information email us at ip@kaust.edu.sa.

  6. Switching on Elusive Organometallic Mechanisms with Photoredox Catalysis

    OpenAIRE

    Terrett, Jack A.; Cuthbertson, James D.; Shurtleff, Valerie W.; MacMillan, David W. C.

    2015-01-01

    Transition metal-catalyzed cross-coupling reactions have become one of the most utilized carbon–carbon and carbon–heteroatom bond-forming reactions in chemical synthesis. More recently, nickel catalysis has been shown to participate in a wide variety of C–C bond forming reactions, most notably Negishi, Suzuki–Miyaura, Stille, Kumada, and Hiyama couplings 1,2 . Despite the tremendous advances in C–C fragment couplings, the ability to forge C–O bonds in a general fashion via nickel catalysis ha...

  7. Seventh BES [Basic Energy Sciences] catalysis and surface chemistry research conference

    International Nuclear Information System (INIS)

    Research programs on catalysis and surface chemistry are presented. A total of fifty-seven topics are included. Areas of research include heterogeneous catalysis; catalysis in hydrogenation, desulfurization, gasification, and redox reactions; studies of surface properties and surface active sites; catalyst supports; chemical activation, deactivation; selectivity, chemical preparation; molecular structure studies; sorption and dissociation. Individual projects are processed separately for the data bases

  8. Seventh BES (Basic Energy Sciences) catalysis and surface chemistry research conference

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Research programs on catalysis and surface chemistry are presented. A total of fifty-seven topics are included. Areas of research include heterogeneous catalysis; catalysis in hydrogenation, desulfurization, gasification, and redox reactions; studies of surface properties and surface active sites; catalyst supports; chemical activation, deactivation; selectivity, chemical preparation; molecular structure studies; sorption and dissociation. Individual projects are processed separately for the data bases. (CBS)

  9. Enantioselective conjugate additions of α-amino radicals via cooperative photoredox and Lewis acid catalysis.

    Science.gov (United States)

    Ruiz Espelt, Laura; McPherson, Iain S; Wiensch, Eric M; Yoon, Tehshik P

    2015-02-25

    We report the highly enantioselective addition of photogenerated α-amino radicals to Michael acceptors. This method features a dual-catalyst protocol that combines transition metal photoredox catalysis with chiral Lewis acid catalysis. The combination of these two powerful modes of catalysis provides an effective, general strategy to generate and control the reactivity of photogenerated reactive intermediates.

  10. A conceptual translation of homogeneous catalysis into heterogeneous catalysis: homogeneous-like heterogeneous gold nanoparticle catalyst induced by ceria supporter.

    Science.gov (United States)

    Li, Zhen-Xing; Xue, Wei; Guan, Bing-Tao; Shi, Fu-Bo; Shi, Zhang-Jie; Jiang, Hong; Yan, Chun-Hua

    2013-02-01

    Translation of homogeneous catalysis into heterogeneous catalysis is a promising solution to green and sustainable development in chemical industry. For this purpose, noble metal nanoparticles represent a new frontier in catalytic transformations. Many challenges remain for researchers to transform noble metal nanoparticles of heterogeneous catalytic active sites into ionic species of homogeneous catalytic active sites. We report here a successful design on translating homogeneous gold catalysis into a heterogeneous system with a clear understanding of the catalytic pathway. This study initiates a novel concept to immobilize a homogeneous catalyst based on electron transfer between supporting base and supported nanoparticles. Meanwhile, on the basis of theoretical calculation, it has deepened the understanding of the interactions between noble metal nanoparticles and the catalyst support.

  11. Asymmetric C-C Bond-Formation Reaction with Pd: How to Favor Heterogeneous or Homogeneous Catalysis?

    DEFF Research Database (Denmark)

    Reimann, S.; Grunwaldt, Jan-Dierk; Mallat, T.;

    2010-01-01

    The enantioselective allylic alkylation of (E)-1,3-diphenylallyl acetate was studied to clarify the heterogeneous or homogeneous character of the Pd/Al2O3-(R)-BINAP catalyst system. A combined approach was applied: the catalytic tests were completed with in situ XANES measurements to follow...... is a clear deviation from the behavior of the corresponding homogeneous system. In contrast, halogenated solvents are easily dehalogenated on Pd/Al2O3 and thus they favor leaching of the metal and formation of soluble compounds, analogous to classical metal corrosion in the presence of halide ions...

  12. A review of new developments in the Friedel–Crafts alkylation – From green chemistry to asymmetric catalysis

    Science.gov (United States)

    2010-01-01

    Summary The development of efficient Friedel–Crafts alkylations of arenes and heteroarenes using only catalytic amounts of a Lewis acid has gained much attention over the last decade. The new catalytic approaches described in this review are favoured over classical Friedel–Crafts conditions as benzyl-, propargyl- and allyl alcohols, or styrenes, can be used instead of toxic benzyl halides. Additionally, only low catalyst loadings are needed to provide a wide range of products. Following a short introduction about the origin and classical definition of the Friedel–Crafts reaction, the review will describe the different environmentally benign substrates which can be applied today as an approach towards greener processes. Additionally, the first diastereoselective and enantioselective Friedel–Crafts-type alkylations will be highlighted. PMID:20485588

  13. A review of new developments in the Friedel–Crafts alkylation – From green chemistry to asymmetric catalysis

    Directory of Open Access Journals (Sweden)

    Magnus Rueping

    2010-01-01

    Full Text Available The development of efficient Friedel–Crafts alkylations of arenes and heteroarenes using only catalytic amounts of a Lewis acid has gained much attention over the last decade. The new catalytic approaches described in this review are favoured over classical Friedel–Crafts conditions as benzyl-, propargyl- and allyl alcohols, or styrenes, can be used instead of toxic benzyl halides. Additionally, only low catalyst loadings are needed to provide a wide range of products. Following a short introduction about the origin and classical definition of the Friedel–Crafts reaction, the review will describe the different environmentally benign substrates which can be applied today as an approach towards greener processes. Additionally, the first diastereoselective and enantioselective Friedel–Crafts-type alkylations will be highlighted.

  14. Binding of copper(II) polypyridyl complexes to DNA and consequences for DNA-based asymmetric catalysis

    NARCIS (Netherlands)

    Draksharapu, Apparao; Boersma, Arnold J; Leising, Miriam; Meetsma, Auke; Browne, Wesley R; Roelfes, Gerard

    2015-01-01

    The interaction between salmon testes DNA (st-DNA) and a series of Cu-II polypyridyl complexes, i.e. [Cu(dmbpy)(NO3)(2)] (1) (dmbpy = 4,4'-dimethyl-2,2'-bipyridine), [Cu(bpy)(NO3)(2)] (2) (bpy = 2,2'-bipyridine), [Cu(phen)(NO3)(2)] (3) (phen = phenanthroline), [Cu(terpy)(NO3)(2)]center dot H2O (4) (

  15. Introducing new 99m-Tc-bifunctional radiopharmaceutical containing dithiosemicarbazone chelate group

    International Nuclear Information System (INIS)

    In our attempt to develop 99m-Tc-Bifunctional Radiopharmaceuticals (BR) of biomolecules, our interest has been focussed on the di-thiosemicarbazone chelating group (DTS); its coordination moiety allows a 1:1 complex with a tetravalent TcO2+, generating a neutral chelate of great stability and compactness. For ligand containing S N coordination, satisfactory labeling has been achieved at pH 5-6, in the presence of Sn-Resin. Based on the above mentioned, the use of DTS is tested in two different modalities by selecting glucose and albumin as the biomolecules of interest. The synthesis of a glucosone-1,2-bis (thiosemicarbazone) (Glu-DTS) and upon its labelling, the 99m-Tc-Glu-DTS was tested in animals. Scintigraphic studies revealed high activity in the brain and heart. This result offered strong support for the use of DTS as a bifunctional chelating agent (BCA). DTS-COOH and DTS-NH2 were synthesized for the coupling with biomolecules. As a first trial, they were coupled with albumin and their functionality proven. The results gathered provided conclusive evidence for the remarkable characteristic of DTS as a basic structure for the development of 99m-Tc-RP

  16. Ternary NiCoP nanosheet arrays: An excellent bifunctional catalyst for alkaline overall water splitting

    Institute of Scientific and Technical Information of China (English)

    Yingjie Li; Haichuan Zhang; Ming Jiang; Yun Kuang; Xiaoming Sun; Xue Duan

    2016-01-01

    Exploring bifunctional catalysts for the hydrogen and oxygen evolution reactions (HER and OER) with high efficiency,low cost,and easy integration is extremely crucial for future renewable energy systems.Herein,ternary NiCoP nanosheet arrays (NSAs) were fabricated on 3D Ni foam by a facile hydrothermal method followed by phosphorization.These arrays serve as bifunctional alkaline catalysts,exhibiting excellent electrocatalytic performance and good working stability for both the HER and OER.The overpotentials of the NiCoP NSA electrode required to drive a current density of 50 mA/cm2 for the HER and OER are as low as 133 and 308 mV,respectively,which is ascribed to excellent intrinsic electrocatalytic activity,fast electron transport,and a unique superaerophobic structure.When NiCoP was integrated as both anodic and cathodic material,the electrolyzer required a potential as low as ~1.77 V to drive a current density of 50 mA/cm2 for overall water splitting,which is much smaller than a reported electrolyzer using the same kind of phosphide-based material and is even better than the combination of Pt/C and Ir/C,the best known noble metal-based electrodes.Combining satisfactory working stability and high activity,this NiCoP electrode paves the way for exploring overall water splitting catalysts.

  17. Large-scale Generation of Patterned Bubble Arrays on Printed Bi-functional Boiling Surfaces

    Science.gov (United States)

    Choi, Chang-Ho; David, Michele; Gao, Zhongwei; Chang, Alvin; Allen, Marshall; Wang, Hailei; Chang, Chih-Hung

    2016-04-01

    Bubble nucleation control, growth and departure dynamics is important in understanding boiling phenomena and enhancing nucleate boiling heat transfer performance. We report a novel bi-functional heterogeneous surface structure that is capable of tuning bubble nucleation, growth and departure dynamics. For the fabrication of the surface, hydrophobic polymer dot arrays are first printed on a substrate, followed by hydrophilic ZnO nanostructure deposition via microreactor-assisted nanomaterial deposition (MAND) processing. Wettability contrast between the hydrophobic polymer dot arrays and aqueous ZnO solution allows for the fabrication of heterogeneous surfaces with distinct wettability regions. Heterogeneous surfaces with various configurations were fabricated and their bubble dynamics were examined at elevated heat flux, revealing various nucleate boiling phenomena. In particular, aligned and patterned bubbles with a tunable departure frequency and diameter were demonstrated in a boiling experiment for the first time. Taking advantage of our fabrication method, a 6 inch wafer size heterogeneous surface was prepared. Pool boiling experiments were also performed to demonstrate a heat flux enhancement up to 3X at the same surface superheat using bi-functional surfaces, compared to a bare stainless steel surface.

  18. Determining the Origin of Half-bandgap-voltage Electroluminescence in Bifunctional Rubrene/C60 Devices

    Science.gov (United States)

    Chen, Qiusong; Jia, Weiyao; Chen, Lixiang; Yuan, De; Zou, Yue; Xiong, Zuhong

    2016-05-01

    Lowering the driving voltage of organic light-emitting diodes (OLEDs) is an important approach to reduce their energy consumption. We have fabricated a series of bifunctional devices (OLEDs and photovoltaics) using rubrene and fullerene (C60) as the active layer, in which the electroluminescence threshold voltage(~1.1 V) was half the value of the bandgap of rubrene. Magneto-electroluminescence (MEL) response of planner heterojunction diodes exhibited a small increase in response to a low magnetic field strength (20 mT). When a hole-transport layer with a low mobility was included in these devices, the MEL response reversed in shape, and simultaneously, the EL threshold voltage became larger than the bandgap voltage. When bulk heterojunction device was examined, the amplitude of MEL curves presented an anomalous voltage-dependence. Following an analysis of the MEL responses of these devices, we proposed that the EL of half-bandgap-voltage device originated from bimolecular triplet-triplet annihilation in the rubrene film, rather than from singlet excitons that formed via an interface auger recombination. This work provides critical insight into the mechanisms of OLED emission and will help advance the applications of bifunctional devices.

  19. Subnanometer Cobalt-Hydroxide-Anchored N-Doped Carbon Nanotube Forest for Bifunctional Oxygen Catalyst.

    Science.gov (United States)

    Kim, Ji Eun; Lim, Joonwon; Lee, Gil Yong; Choi, Sun Hee; Maiti, Uday Narayan; Lee, Won Jun; Lee, Ho Jin; Kim, Sang Ouk

    2016-01-27

    Electrochemical oxygen redox reactions are the crucial elements for energy conversion and storage including fuel cells and metal air batteries. Despite tremendous research efforts, developing high-efficient, low-cost, and durable bifunctional oxygen catalysts remains a major challenge. We report a new class of hybrid material consisting of subnanometer thick amorphous cobalt hydroxide anchored on NCNT as a durable ORR/OER bifunctional catalyst. Although amorphous cobalt species-based catalysts are known as good OER catalysts, hybridizing with NCNT successfully enhanced ORR activity by promoting a 4e reduction pathway. Abundant charge carriers in amorphous cobalt hydroxide are found to trigger the superior OER activity with high current density and low Tafel slope as low as 36 mV/decade. A remarkably high OER turnover frequency (TOF) of 2.3 s(-1) at an overpotential of 300 mV was obtained, one of the highest values reported so far. Moreover, the catalytic activity was maintained over 120 h of cycling. The unique subnanometer scale morphology of amorphous hydroxide cobalt species along with intimate cobalt species-NCNT interaction minimizes the deactivation of catalyst during prolonged repeated cycles. PMID:26766495

  20. Construction of a bifunctional enzyme fusion for the combined determination of biogenic amines in foods.

    Science.gov (United States)

    Lee, Jae-Ick; Jang, Jun-Hyuck; Yu, Mi-Ji; Kim, Young-Wan

    2013-09-25

    Biogenic amines (BAs) are a group of low-molecular-mass organic bases derived from free amino acids. Due to the undesirable effects of BAs on human health, amine oxidase-based detection methods for BAs in foods have been developed. Here, we developed a bifunctional enzyme fusion (MAPO) using a Cu(2+)-containing monoamine oxidase (AMAO2) and a flavin adenine dinucleotide-containing putrescine oxidase (APUO) from Arthrobacter aurescens. It was necessary to activate MAPO with supplementary Cu(2+) ions, leading to a 6- to 12-fold improvement in catalytic efficiency (kcat/KM) for monoamines. The optimal temperatures of Cu(2+)-activated MAPO (cMAPO) for both tyramine and putrescine were 50 °C, and the optimal pH values for tyramine and putrescine were pH 7.0 and pH 8.0, respectively, consistent with those of AMAO2 and APUO, respectively. The cMAPO showed relative specific activities of 100, 99, 32, and 32 for 2-phenylethylamine, tyramine, histamine, and putrescine, respectively. The tyramine-equivalent BA contents of fermented soybean pastes by cMAPO were more than 90% of the total BA determined by HPLC. In conclusion, cMAPO is fully bifunctional toward biogenic monoamines and putrescine, allowing the combined determination of multiple BAs in foods. This colorimetric determination method could be useful for point-of-care testing to screen safety-guaranteed products prior to instrumental analyses. PMID:24001036

  1. Highly Efficient and Robust Nickel Phosphides as Bifunctional Electrocatalysts for Overall Water-Splitting.

    Science.gov (United States)

    Li, Jiayuan; Li, Jing; Zhou, Xuemei; Xia, Zhaoming; Gao, Wei; Ma, Yuanyuan; Qu, Yongquan

    2016-05-01

    To search for the efficient non-noble metal based and/or earth-abundant electrocatalysts for overall water-splitting is critical to promote the clean-energy technologies for hydrogen economy. Herein, we report nickel phosphide (NixPy) catalysts with the controllable phases as the efficient bifunctional catalysts for water electrolysis. The phases of NixPy were determined by the temperatures of the solid-phase reaction between the ultrathin Ni(OH)2 plates and NaH2PO2·H2O. The NixPy with the richest Ni5P4 phase synthesized at 325 °C (NixPy-325) delivered efficient and robust catalytic performance for hydrogen evolution reaction (HER) in the electrolytes with a wide pH range. The NixPy-325 catalysts also exhibited a remarkable performance for oxygen evolution reaction (OER) in a strong alkaline electrolyte (1.0 M KOH) due to the formation of surface NiOOH species. Furthermore, the bifunctional NixPy-325 catalysts enabled a highly performed overall water-splitting with ∼100% Faradaic efficiency in 1.0 M KOH electrolyte, in which a low applied external potential of 1.57 V led to a stabilized catalytic current density of 10 mA/cm(2) over 60 h. PMID:27064172

  2. Bifunctional Ag/C3N4.5 composite nanobelts for photocatalysis and antibacterium

    Science.gov (United States)

    Lei, Renbo; Jian, Jikang; Zhang, Zhihua; Song, Bo; Wu, Rong

    2016-09-01

    Multiple functions can be achieved in carbon nitride-based composite nanomaterials by tuning their components and structures. Here, we report on a large-scale synthesis of novel bifunctional Ag/C3N4.5 composite nanobelts (CNBs) with efficient photocatalytic and antibacterial activity. The Ag/C3N4.5 CNBs were synthesized in high yield by a two-step route including a homogeneous precipitation process and a subsequent calcination treatment. The structural, morphological, compositional, and spectroscopic characterizations revealed that the Ag/C3N4.5 CNBs are composed of N-deficient melem ultrathin nanobelts and crystalline Ag nanoparticles attached to the surface of the nanobelts with good contact. The band gap of the Ag/C3N4.5 CNBs is determined to be about 3.04 eV. The efficient photocatalytic and antibacterial activities of the composite nanomaterials are verified by testing the degradation of Rhodamine B (RhB) and the inhibition zone to bacterium E. coli. The work provides a facile route to bifunctional carbon nitride-based composites with potential applications in the fields of the environment and biology.

  3. Bifunctional Ligands for Inhibition of Tight-Binding Protein-Protein Interactions.

    Science.gov (United States)

    Ivan, Taavi; Enkvist, Erki; Viira, Birgit; Manoharan, Ganesh Babu; Raidaru, Gerda; Pflug, Alexander; Alam, Kazi Asraful; Zaccolo, Manuela; Engh, Richard Alan; Uri, Asko

    2016-08-17

    The acknowledged potential of small-molecule therapeutics targeting disease-related protein-protein interactions (PPIs) has promoted active research in this field. The strategy of using small molecule inhibitors (SMIs) to fight strong (tight-binding) PPIs tends to fall short due to the flat and wide interfaces of PPIs. Here we propose a biligand approach for disruption of strong PPIs. The potential of this approach was realized for disruption of the tight-binding (KD = 100 pM) tetrameric holoenzyme of cAMP-dependent protein kinase (PKA). Supported by X-ray analysis of cocrystals, bifunctional inhibitors (ARC-inhibitors) were constructed that simultaneously associated with both the ATP-pocket and the PPI interface area of the catalytic subunit of PKA (PKAc). Bifunctional inhibitor ARC-1411, possessing a KD value of 3 pM toward PKAc, induced the dissociation of the PKA holoenzyme with a low-nanomolar IC50, whereas the ATP-competitive inhibitor H89 bound to the PKA holoenzyme without disruption of the protein tetramer. PMID:27389935

  4. Cyclic isoDGR and RGD peptidomimetics containing bifunctional diketopiperazine scaffolds are integrin antagonists.

    Science.gov (United States)

    Panzeri, Silvia; Zanella, Simone; Arosio, Daniela; Vahdati, Leila; Dal Corso, Alberto; Pignataro, Luca; Paolillo, Mayra; Schinelli, Sergio; Belvisi, Laura; Gennari, Cesare; Piarulli, Umberto

    2015-04-13

    The cyclo[DKP-isoDGR] peptidomimetics 2-5, containing bifunctional diketopiperazine (DKP) scaffolds that differ in the configuration of the two DKP stereocenters and in the substitution at the DKP nitrogen atoms, were prepared and examined in vitro in competitive binding assays with purified αv β3 and αv β5 integrin receptors. IC50 values ranged from low nanomolar (ligand 3) to submicromolar with αv β3 integrin. The biological activities of ligands cyclo[DKP3-RGD] 1 and cyclo[DKP3-isoDGR] 3, bearing the same bifunctional DKP scaffold and showing similar αV β3 integrin binding values, were compared in terms of their cellular effects in human U373 glioblastoma cells. Compounds 1 and 3 displayed overlapping inhibitory effects on the FAK/Akt integrin activated transduction pathway and on integrin-mediated cell infiltration processes, and qualify therefore, despite the different RGD and isoDGR sequences, as integrin antagonists. Both compounds induced apoptosis in glioma cells after 72 hour treatment.

  5. Determining the Origin of Half-bandgap-voltage Electroluminescence in Bifunctional Rubrene/C60 Devices

    Science.gov (United States)

    Chen, Qiusong; Jia, Weiyao; Chen, Lixiang; Yuan, De; Zou, Yue; Xiong, Zuhong

    2016-01-01

    Lowering the driving voltage of organic light-emitting diodes (OLEDs) is an important approach to reduce their energy consumption. We have fabricated a series of bifunctional devices (OLEDs and photovoltaics) using rubrene and fullerene (C60) as the active layer, in which the electroluminescence threshold voltage(~1.1 V) was half the value of the bandgap of rubrene. Magneto-electroluminescence (MEL) response of planner heterojunction diodes exhibited a small increase in response to a low magnetic field strength (20 mT). When a hole-transport layer with a low mobility was included in these devices, the MEL response reversed in shape, and simultaneously, the EL threshold voltage became larger than the bandgap voltage. When bulk heterojunction device was examined, the amplitude of MEL curves presented an anomalous voltage-dependence. Following an analysis of the MEL responses of these devices, we proposed that the EL of half-bandgap-voltage device originated from bimolecular triplet-triplet annihilation in the rubrene film, rather than from singlet excitons that formed via an interface auger recombination. This work provides critical insight into the mechanisms of OLED emission and will help advance the applications of bifunctional devices. PMID:27142285

  6. Bifunctional composite microspheres of silica/lanthanide-polyoxometalates/Au: Study on luminescence and catalytic properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jun, E-mail: junwang924@mail.ccnu.edu.cn; Fan, Shaohua; Zhao, Weiqian; Lu, Xuelian; Li, Wuke

    2013-12-02

    In this paper, the synthesis and properties of composite silica microspheres grafted with gold nanoparticles and lanthanide-polyoxometalates are described. This synthesis employs polyethyleneimine as the crosslink polymer to immobilize the Au nanoparticles and lanthanide-polyoxometalates on silica spheres, which results in the formation of bifunctional composite microspheres of silica/lanthanide-polyoxometalates/Au. The composite material was found to be catalytically active in the oxidation of styrene, and benzaldehyde and styrene oxide were the main products. Catalyzed oxidation of styrene demonstrates the size-dependent activity of catalysts and the smaller catalyst shows the higher selectivity. Moreover, the composite particles show bright red luminescence under UV light, which could be seen by naked eyes. The luminescence properties of composite material and the effect of Au nanoparticles on the luminescence of Eu ion were investigated, and energy could be more effectively transferred from ligand to lanthanide ion when Au nanoparticles were grafted on silica spheres. The integration of luminescent components and Au particles makes it possible to label catalyst and monitor the catalyzed reactions. - Highlights: • The bifunctional composite microspheres were fabricated. • Both polyoxometalates and Au nanoparticles could be grafted on silica spheres. • The composite particles exhibit the excellent luminescence and catalytic activity. • The Au nanoparticles affect the luminescence properties of Eu{sup 3+} ions.

  7. Characterization of a bifunctional enzyme with (p)ppGpp-hydrolase/synthase activity in Leptospira interrogans.

    Science.gov (United States)

    He, Ping; Deng, Cong; Liu, Boyu; Zeng, LingBing; Zhao, Wei; Zhang, Yan; Jiang, XuCheng; Guo, XiaoKui; Qin, JinHong

    2013-11-01

    Alarmone Guanosine 5'-diphosphate (or 5'-triphosphate) 3'-diphosphate [(p)ppGpp] is the key component that globally regulates stringent control in bacteria. There are two homologous enzymes, RelA and SpoT in Escherichia coli, which are responsible for fluctuations in (p)ppGpp concentration inside the cell, whereas there exists only a single RelA/SpoT enzyme in Gram-positive bacteria. We have identified a bifunctional enzyme with (p)ppGpp-hydrolase/synthase activity in Leptospira interrogans. We show that the relLin gene (LA_3085) encodes a protein that fully complements the relA/spoT double mutants in E. coli. The protein functions as a (p)ppGpp degradase as well as a (p)ppGpp synthase when the cells encounter amino acid stress and deprivation of carbon sources. N-terminus HD and RSD domains of relLin (relLinN ) were observed to restore growth of double mutants of E. coli. Finally, We demonstrate that purified RelLin and RelLinN show high (p)ppGpp synthesis activity in vitro. Taken together, our results suggest that L. interrogans contain a single Rel-like bifunctional protein, RelLin , which plays an important role in maintaining the basal level of (p)ppGpp in the cell potentially contributing to the regulation of bacterial stress response.

  8. Bifunctional, Carbon-Free Nickel/Cobalt-Oxide Cathodes for Lithium-Air Batteries with an Aqueous Alkaline Electrolyte

    International Nuclear Information System (INIS)

    Highlights: • High activity bi-functional catalyst combination for ORR and OER . • An optimum ratio of high active bi-functional catalysts was found. • Novel electrodes without carbon to avoid carbon corrosion during OER mode. • EIS model for OER describes influence of a growing oxide layers. • Long-term test exhibited an excellent long-term stability over 1200 cycles. - Abstract: Lithium-air batteries with an aqueous alkaline electrolyte promise a very high practical energy density and capacity. These batteries are mainly limited by high overpotentials on the bifunctional cathode during charge and discharge. To reduce overpotentials the bifunctional cathode of such batteries must be improved significantly. Nickel is relatively inexpensive and has a good catalytic activity in alkaline media. Co3O4 was found to be a promising metal oxide catalyst for oxygen evolution in alkaline media but it has a low electronic conductivity. On the other hand since nickel has a good electronic conductivity Co3O4 can be added to pure nickel electrodes to enhance performance due to a synergetic effect. Due to the poor stability of carbon materials at high anodic potentials, gas diffusion electrodes were prepared without carbon to improve especially long-term stability. Gas diffusion electrodes were electrochemically investigated in a half cell. In addition, cyclic voltammogrametry (CV) and electrochemical impedance spectroscopy (EIS) were carried out. SEM was used for the physical and morphological investigations. Investigations showed that electrodes containing 20 wt.% Co3O4 exhibited the highest performance

  9. Opportunities and challenges in the electrocatalysis of CO2 and CO reduction using bifunctional surfaces

    DEFF Research Database (Denmark)

    Jovanov, Zarko; Hansen, Heine A.; Varela Gasque, Ana Sofia;

    2016-01-01

    "bifunctional" catalysts using Au-Cd based alloys inspired by theoretical modelling. Density functional theory calculations suggest more favourable thermodynamics for CO2 reduction to CO and methanol on mixed Au-Cd sites on Au3Cd relative to similar values on Au. We use various tools to test the bulk...

  10. BACTERIAL BIOFILM FORMATION VERSUS MAMMALIAN CELL GROWTH ON TITANIUM-BASED MONO- AND BI-FUNCTIONAL COATINGS

    NARCIS (Netherlands)

    Subbiahdoss, Guruprakash; Pidhatika, Bidhari; Coullerez, Geraldine; Charnley, Mirren; Kuijer, Roel; van der Mei, Henny C.; Textor, Marcus; Busscher, Henk J.

    2010-01-01

    Biomaterials-associated-infections (BAI) are serious complications in modern medicine. Although non-adhesive coatings, like polymer-brush coatings, have been shown to prevent bacterial adhesion, they do not support cell growth. Bi-functional coatings are supposed to prevent biofilm formation while s

  11. Dynamic control of chirality in phosphine ligands for enantioselective catalysis

    NARCIS (Netherlands)

    Zhao, Depeng; Neubauer, Thomas M; Feringa, Ben L

    2015-01-01

    Chirality plays a fundamental role in biology and chemistry and the precise control of chirality in a catalytic conversion is a key to modern synthesis most prominently seen in the production of pharmaceuticals. In enantioselective metal-based catalysis, access to each product enantiomer is commonly

  12. A Course in Heterogeneous Catalysis Involving Video-Based Seminars.

    Science.gov (United States)

    White, Mark G.

    1984-01-01

    A video-based format was used during a graduate seminar course designed to educate students on the nature of catalysis, to help transfer information among students working on similar problems, and to improve communication skills. The mechanics of and student reaction to this seminar course are discussed. (JN)

  13. Surface Chemistry in Heterogeneous Catalysis: An Emerging Discipline.

    Science.gov (United States)

    White, J. M.; Campbell, Charles T.

    1980-01-01

    Provides background data on surface chemistry as an emerging discipline. Highlights the important role which surfaces play in catalysis by focusing on the catalyzed oxidation of carbon monoxide. Provides a demonstration of how surfaces exert their influences in heterogeneous phenomena and illustrates how experimental problems in this field are…

  14. Applying homogeneous catalysis for the synthesis of pharmaceuticals.

    Science.gov (United States)

    Beller, M

    2006-01-01

    This article describes recent achievements of my research group in the Leibniz-Institut für Katalyse e.V. in the area of applied homogeneous catalysis for the synthesis of biologically active compounds. Special focus is given on the development of novel and practical palladium and copper catalysts for the functionalization of haloarenes and haloheteroarenes.

  15. Synergy between experimental and computational approaches to homogeneous photoredox catalysis.

    Science.gov (United States)

    Demissie, Taye B; Hansen, Jørn H

    2016-07-01

    In this Frontiers article, we highlight how state-of-the-art density functional theory calculations can contribute to the field of homogeneous photoredox catalysis. We discuss challenges in the fields and potential solutions to be found at the interface between theory and experiment. The exciting opportunities and insights that can arise through such an interdisciplinary approach are highlighted.

  16. Multiphoton catalysis with coherent state input: nonclassicality and decoherence

    Science.gov (United States)

    Hu, Li-Yun; Wu, Jia-Ni; Liao, Zeyang; Zubairy, M. Suhail

    2016-09-01

    We propose a scheme to generate a new kind of non-Gaussian state—the Laguerre polynomial excited coherent state (LPECS)—by using multiphoton catalysis with coherent state input. The nonclassical properties of the LPECS are studied in terms of nonclassical depth, Mandel’s parameter, second-order correlation, quadrature squeezing, and the negativity of the Wigner function (WF). It is found that the LPECS is highly nonclassical and its nonclassicality depends on the amplitude of the coherent state, the catalysis photon number, and the parameters of the unbalanced beam splitter (BS). In particular, the maximum degree of squeezing can be enhanced by increasing the catalysis photon number. In addition, we examine the effect of decoherence using the WF, which shows that the negative region, the characteristic time of decoherence, and the structure of the WF are affected by catalysis photon number and the parameters of the unbalanced BS. Our work provides general analysis on how to prepare polynomial quantum states, which may be useful in the fields of quantum information and quantum computation.

  17. Cooperative catalysis with first-row late transition metals

    NARCIS (Netherlands)

    J.I. van der Vlugt

    2012-01-01

    Cooperative catalysis with first-row transition metals holds much promise for future developments regarding sustainable, selective transformations, including e.g. alkenes, dienes and a variety of small molecules such as CO2, N2 and water. This non-exhaustive analysis of the current state-of-the-art

  18. Self-catalysis growth of zinc oxide nanopillar array

    Institute of Scientific and Technical Information of China (English)

    YUAN Zhihao; DUAN Yueqin; WU Yang; BIE Lijian; FAN Shoushan

    2005-01-01

    Zn nanodot array was prepared by using a nano-masking with porous alumina membrane as mask. Based on such a nanodot array, a self-catalysis method was developed for fabricating ZnO nanopillars on Si substrate. The resultant nanopillars show a two-dimensional, and regular array with uniform size and orientation.

  19. Support and promoter effects in automotive exhaust catalysis

    NARCIS (Netherlands)

    Lepage, M.

    2009-01-01

    Automotive catalysis being a mature technology, it can only be improved by the introduction of new breakthroughs. The ideas generating these technical advances in material science can be found thanks to the synthesis and study of model systems with controlled geometries, compositions, interactions a

  20. Heterogeneous Catalysis: On Bathroom Mirrors and Boiling Stones

    Science.gov (United States)

    Philipse, Albert P.

    2011-01-01

    Though heterogeneous nucleation of liquid droplets on a smooth surface (such as a bathroom mirror) is a classical topic in nucleation theory, it is not well-known that this topic is actually a pedagogical example of heterogeneous catalysis: the one and only effect of the surface is to lower the activation Gibbs energy of droplet formation. In…

  1. Robustness of the rotary catalysis mechanism of F1-ATPase.

    Science.gov (United States)

    Watanabe, Rikiya; Matsukage, Yuki; Yukawa, Ayako; Tabata, Kazuhito V; Noji, Hiroyuki

    2014-07-11

    F1-ATPase (F1) is the rotary motor protein fueled by ATP hydrolysis. Previous studies have suggested that three charged residues are indispensable for catalysis of F1 as follows: the P-loop lysine in the phosphate-binding loop, GXXXXGK(T/S); a glutamic acid that activates water molecules for nucleophilic attack on the γ-phosphate of ATP (general base); and an arginine directly contacting the γ-phosphate (arginine finger). These residues are well conserved among P-loop NTPases. In this study, we investigated the role of these charged residues in catalysis and torque generation by analyzing alanine-substituted mutants in the single-molecule rotation assay. Surprisingly, all mutants continuously drove rotary motion, even though the rotational velocity was at least 100,000 times slower than that of wild type. Thus, although these charged residues contribute to highly efficient catalysis, they are not indispensable to chemo-mechanical energy coupling, and the rotary catalysis mechanism of F1 is far more robust than previously thought.

  2. Functionalized pyrazines as ligands for minor actinide extraction and catalysis

    NARCIS (Netherlands)

    Nikishkin, N.

    2013-01-01

    The research presented in this thesis concerns the design of ligands for a wide range of applications, from nuclear waste treatment to catalysis. The strategies employed to design actinide-selective extractants, for instance, comprise the fine tuning of the ligand electronic properties as well as us

  3. Early Main Group Metal Catalysis : How Important is the Metal?

    NARCIS (Netherlands)

    Penafiel, Johanne; Maron, Laurent; Harder, Sjoerd

    2015-01-01

    Organocalcium compounds have been reported as efficient catalysts for various alkene transformations. In contrast to transition metal catalysis, the alkenes are not activated by metal-alkene orbital interactions. Instead it is proposed that alkene activation proceeds through an electrostatic interac

  4. Research progress in synthesis and catalysis of polyoxometalates

    Institute of Scientific and Technical Information of China (English)

    GONG Yun; HU Changwen; LIANG Hong

    2005-01-01

    Recent progress in the synthetic chemistry and catalysis of polyoxometalates (POMs) is reviewed. The novel POMs and their derivatives emerging in nearly three years (2002-2004) are introduced, including POMs with novel structure, POMs-organic hybrid compounds and host-guest complexes. Our review is focused on the elaboration of POMs' supramolecular chemistry.

  5. Physical applications of muon catalysis: Muon capture in hydrogen

    Science.gov (United States)

    Filchenkov, V. V.

    2016-07-01

    Results of theoretical and experimental research on capture of negative muons in hydrogen are reported with an emphasis on the accompanying phenomenon of muon catalysis in hydrogen and subtleties of the experimental method. A conclusion is drawn that precise determination of the capture rate is important for refining the standard model.

  6. Chemometric Optimization Studies in Catalysis Employing High-Throughput Experimentation

    NARCIS (Netherlands)

    Pereira, S.R.M.

    2008-01-01

    The main topic of this thesis is the investigation of the synergies between High-Throughput Experimentation (HTE) and Chemometric Optimization methodologies in Catalysis research and of the use of such methodologies to maximize the advantages of using HTE methods. Several case studies were analysed

  7. Nitrogen doped carbon nanotubes : synthesis, characterization and catalysis

    NARCIS (Netherlands)

    van Dommele, S.

    2008-01-01

    Nitrogen containing Carbon Nanotubes (NCNT) have altered physical- and chemical properties with respect to polarity, conductivity and reactivity as compared to conventional carbon nanotubes (CNT) and have potential for use in electronic applications or catalysis. In this thesis the incorporation of

  8. Reciprocal regulation as a source of ultrasensitivity in two-component systems with a bifunctional sensor kinase.

    Directory of Open Access Journals (Sweden)

    Ronny Straube

    2014-05-01

    Full Text Available Two-component signal transduction systems, where the phosphorylation state of a regulator protein is modulated by a sensor kinase, are common in bacteria and other microbes. In many of these systems, the sensor kinase is bifunctional catalyzing both, the phosphorylation and the dephosphorylation of the regulator protein in response to input signals. Previous studies have shown that systems with a bifunctional enzyme can adjust the phosphorylation level of the regulator protein independently of the total protein concentrations--a property known as concentration robustness. Here, I argue that two-component systems with a bifunctional enzyme may also exhibit ultrasensitivity if the input signal reciprocally affects multiple activities of the sensor kinase. To this end, I consider the case where an allosteric effector inhibits autophosphorylation and, concomitantly, activates the enzyme's phosphatase activity, as observed experimentally in the PhoQ/PhoP and NRII/NRI systems. A theoretical analysis reveals two operating regimes under steady state conditions depending on the effector affinity: If the affinity is low the system produces a graded response with respect to input signals and exhibits stimulus-dependent concentration robustness--consistent with previous experiments. In contrast, a high-affinity effector may generate ultrasensitivity by a similar mechanism as phosphorylation-dephosphorylation cycles with distinct converter enzymes. The occurrence of ultrasensitivity requires saturation of the sensor kinase's phosphatase activity, but is restricted to low effector concentrations, which suggests that this mode of operation might be employed for the detection and amplification of low abundant input signals. Interestingly, the same mechanism also applies to covalent modification cycles with a bifunctional converter enzyme, which suggests that reciprocal regulation, as a mechanism to generate ultrasensitivity, is not restricted to two

  9. [Development of new methods in asymmetric reactions and their applications].

    Science.gov (United States)

    Node, Manabu

    2002-01-01

    Several novel methods using chiral reagents and biocatalysts for asymmetric reactions are described. Among those reactions, asymmetric reduction via a novel tandem Michael addition/Meerwein-Ponndorf-Verley reduction of acyclic alpha,beta-unsaturated ketones using a chiral mercapto alcohol, asymmetric synthesis of allene-1,3-dicarboxylate via crystallization induced asymmetric transformation, and improved asymmetric nitroolefination of lactones and lactames at alpha-carbon using new chiral reagents were developed. In the reactions using biocatalysts, asymmetric dealkoxycarbonylation of bicyclic beta-keto diesters having sigma-symmetry with lipase or esterase to give optically active beta-keto esters, the asymmetric reduction of bicyclic 1,3-diketones having sigma-symmetry with Baker's yeast to give optically active keto alcohols, and the asymmetric aldol reaction of glycine with threonine aldolase were also developed. The above mentioned products were effectively utilized as chiral building blocks for the asymmetric synthesis of natural products and drugs.

  10. Excess mutual catalysis is required for effective evolvability.

    Science.gov (United States)

    Markovitch, Omer; Lancet, Doron

    2012-01-01

    It is widely accepted that autocatalysis constitutes a crucial facet of effective replication and evolution (e.g., in Eigen's hypercycle model). Other models for early evolution (e.g., by Dyson, Gánti, Varela, and Kauffman) invoke catalytic networks, where cross-catalysis is more apparent. A key question is how the balance between auto- (self-) and cross- (mutual) catalysis shapes the behavior of model evolving systems. This is investigated using the graded autocatalysis replication domain (GARD) model, previously shown to capture essential features of reproduction, mutation, and evolution in compositional molecular assemblies. We have performed numerical simulations of an ensemble of GARD networks, each with a different set of lognormally distributed catalytic values. We asked what is the influence of the catalytic content of such networks on beneficial evolution. Importantly, a clear trend was observed, wherein only networks with high mutual catalysis propensity (p(mc)) allowed for an augmented diversity of composomes, quasi-stationary compositions that exhibit high replication fidelity. We have reexamined a recent analysis that showed meager selection in a single GARD instance and for a few nonstationary target compositions. In contrast, when we focused here on compotypes (clusters of composomes) as targets for selection in populations of compositional assemblies, appreciable selection response was observed for a large portion of the networks simulated. Further, stronger selection response was seen for high p(mc) values. Our simulations thus demonstrate that GARD can help analyze important facets of evolving systems, and indicate that excess mutual catalysis over self-catalysis is likely to be important for the emergence of molecular systems capable of evolutionlike behavior.

  11. Design and synthesis of chiral Ti-1,1'-bi-2-naphthol coordination polymers for heterogeneous catalytic asymmetric oxidation of sulfides

    Institute of Scientific and Technical Information of China (English)

    YUAN Xiao-ya; WANG Xiao-tian

    2008-01-01

    Polymer-immobilized catalysis has many advantages such as easy recovery and reuse of catalyst. We prepared three novel chiral 1,1'-bi-2-naphthol-Ti coordination polymers with properly designed ligands and Ti(OiPr)4 under mild conditions. The prepared polymers exhibited good activity and excellent enantioselectivity (over 99%ee) in catalyzing the asymmetric oxidation of sulfides. The bridge linker in the polymer and the reaction solvent noticeably affected the enantioselectivity. The chiral coordination polymer was very stable and easy to separate from catalyzed reaction systems, with no significant loss of activity or enantioselectivity after reuse for at least ten times. These findings suggest a promising type of catalysts for synthesizing the widely used sulfoxides by asymmetrically oxidizing sulfides.

  12. Renewable resource management under asymmetric information

    DEFF Research Database (Denmark)

    Jensen, Frank; Andersen, Peder; Nielsen, Max

    2013-01-01

    Asymmetric information between fishermen and the regulator is important within fisheries. The regulator may have less information about stock sizes, prices, costs, effort, productivity and catches than fishermen. With asymmetric information, a strong analytical tool is principal-agent analysis....... In this paper, we study asymmetric information about productivity within a principal-agent framework and a tax on fishing effort is considered. It is shown that a second best optimum can be achieved if the effort tax is designed such that low-productivity agents rent is exhausted, while high-productivity agents...... receive an information rent. The information rent is equivalent to the total incentive cost. The incentive costs arise as we want to reveal the agent's type....

  13. Dc SQUIDs with asymmetric shunt resistors

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, Matthias; Nagel, Joachim; Kemmler, Matthias; Koelle, Dieter; Kleiner, Reinhold [Physikalisches Institut - Experimentalphysik II and Center for Collective Quantum Phenomena in LISAplus, Universitaet Tuebingen (Germany); Meckbach, Johannes Maximilian; Ilin, Konstantin; Siegel, Michael [Institut fuer Mikro- und Nanoelektronische Systeme, Karlsruhe Institute of Technology, Karlsruhe (Germany)

    2013-07-01

    We have investigated asymmetrically shunted Nb/Al-AlO{sub x}/Nb dc SQUIDs. Simulations based on the coupled Langevin equations predict that the optimum energy resolution ε, and thus also the noise performance of such an asymmetric SQUID, can be 3-4 times better than that of its symmetric counterpart. While keeping the total resistance R identical to a comparable symmetric SQUID with R{sup -1} = R{sub 1}{sup -1} + R{sub 2}{sup -1}, we shunted only one of the two Josephson junctions with R = R{sub 1,2}/2. Both types of SQUIDs were characterized with respect to their transport and noise properties at temperature T = 4.2 K, and we compared the experimental results with numerical simulations. Experiments yielded ε ∼ 32 ℎ for an asymmetric SQUID with an inductance L = 22 pH, whereas a comparable symmetric device achieved ε = 110 ℎ.

  14. A nanostructured bifunctional Pd/C gas-diffusion electrode for metal-air batteries

    International Nuclear Information System (INIS)

    Graphical Abstract: Images showing (a) a scanning electrode microscope cross section of the Pd/C air electrode, (b) a TEM micrograph of the Pd/C catalyst, and (c) charge–discharge cycling of the air electrode in 6 mol dm−3 KOH at 20 mA cm−2 under 100 ml min−1 oxygen flow. - Highlights: • The Pd/C air electrode shows consistent good performance at modest current densities (20–80 mA cm−2), and is stable for 1000 cycles at room temperature. • The Pd/C air electrode has a potential difference of 0.53 V between oxygen evolution and oxygen reduction. • The air electrode makes efficient use of a small precious metal loading (0.5 mg cm−2), and is mainly made from lightweight carbon materials. • The air electrode has better stability than a commercial 2 mg cm−2 Pt/C electrode on repeated charge–discharge cycling, despite having a lower (and therefore less expensive) loading of catalyst. - Abstract: Designing a bifunctional air electrode which catalyses both the oxygen reduction and oxygen evolution reactions is an essential part of progress towards fully rechargeable metal-air batteries, such as the iron-air battery which is environmentally friendly, low cost, and does not suffer risk of thermal runaway like lithium-ion batteries. This paper reports the development of a lightweight carbon-based bifunctional air electrode, catalysed by a small (0.5 mg cm−2) loading of 30 wt.% palladium on carbon. The Pd-catalysed air electrode showed good bifunctional activity, with 0.53 V potential difference between oxygen reduction and evolution. The Pd/C air electrode showed improved catalytic activity at high current densities (≥ 50 mA cm−2) and enhanced durability compared with two commercial Pt/C air electrodes produced by Gaskatel GmbH and Johnson Matthey. A stable oxygen evolution potential was maintained over 1,000 charge-discharge cycles

  15. Oxygen electrode bifunctional electrocatalyst NiCo2O4 spinel

    Science.gov (United States)

    Fielder, William L.; Singer, Joseph

    1988-01-01

    A significant increase in energy density may be possible if a two-unit alkaline regenerative H2-O2 fuel cell is replaced with a single-unit system that uses passive means for H2O transfer and thermal control. For this single-unit system, new electrocatalysts for the O2 electrode will be required which are not only bifunctionally active but also chemically and electrochemically stable between the voltage range of about 0.7 and 1.5 V. NiCo2O4 spinel is reported to have certain characteristics that make it useful for a study of electrode fabrication techniques. High surface area NiCo2O4 powder was fabricated into unsupported, bifunctional, PTFE-bonded, porous gas fuel cell electrodes by commercial sources using varying PTFE contents and sintering temperatures. The object of this study is to measure the bifunctional activities of these electrodes and to observe what performance differences might result from different commercial electrode fabricators. O2 evolution and O2 reduction data were obtained at 80 C (31 percent KOH). An irreversible reaction (i.e., aging) occurred during O2 evolution at potentials greater than about 1.5 V. Anodic Tafel slopes of 0.06 and 0.12 V/decade were obtained for the aged electrodes. Within the range of 15 to 25 percent, the PTFE content was not a critical parameter for optimizing the electrode for O2 evolution activity. Sintering temperatures between 300 and 340 C may be adequate but heating at 275 C may not be sufficient to properly sinter the PTFE-NiCo2O4 mixture. Electrode disintegration was observed during O2 reduction. Transport of O2 to the NiCo2O4 surface became prohibitive at greater than about -0.02 A/sq cm. Cathodic Tafel slopes of -0.6 and -0.12 V/decade were assumed for the O2 reduction process. A PTFE content of 25 percent (or greater) appears to be preferable for sintering the PTFE-NiCo2O4 mixture.

  16. Asymmetric membrane osmotic capsules for terbutaline sulphate

    Directory of Open Access Journals (Sweden)

    N G Gobade

    2012-01-01

    Full Text Available The aim of the present study was to design an asymmetric membrane capsule, an osmotic pump-based drug delivery system of ethyl cellulose for controlled release of terbutaline sulphate. asymmetric membrane capsules contains pore-forming water soluble additive, sorbitol in different concentrations in the capsule shell membrane, which after coming in contact with water, dissolves, resulting in an in situ formation of a microporous structure. The terbutaline sulphate is a β-adrenoreceptor agonist widely used in the treatment of asthma. The oral dosage regimen of terbutaline sulphate is 5 mg twice or thrice daily, the plasma half-life is approximate 3-4 h and it produces GI irritation with extensive first pass metabolism. Hence, terbutaline sulphate was chosen as a model drug with an aim to develop controlled release system. Different formulations of ethyl cellulose were prepared by phase inversion technique using different concentrations of sorbitol as pore forming agent. It was found that the thickness of the prepared asymmetric membrane capsules was increased with increase in concentration of ethyl cellulose and pore forming agent, i.e. sorbitol. The dye release study in water and 10% sodium chloride solution indicates that, the asymmetric membrane capsules follow osmotic principle to release content. The pores formed due to sorbitol were confirmed by microscopic observation of transverse section of capsule membrane. Data of in vitro release study of terbutaline sulphate from asymmetric membrane capsules indicated that, the capsules prepared with 10% and 12.5% of ethyl cellulose and 25% of sorbitol released as much as 97.44% and 76.27% in 12 h, respectively with zero order release rate. Hence asymmetric membrane capsule of 10% ethyl cellulose and 25% of sorbitol is considered as optimum for controlled oral delivery of terbutaline sulphate.

  17. Asymmetric membrane osmotic capsules for terbutaline sulphate.

    Science.gov (United States)

    Gobade, N G; Koland, Marina; Harish, K H

    2012-01-01

    The aim of the present study was to design an asymmetric membrane capsule, an osmotic pump-based drug delivery system of ethyl cellulose for controlled release of terbutaline sulphate. asymmetric membrane capsules contains pore-forming water soluble additive, sorbitol in different concentrations in the capsule shell membrane, which after coming in contact with water, dissolves, resulting in an in situ formation of a microporous structure. The terbutaline sulphate is a β-adrenoreceptor agonist widely used in the treatment of asthma. The oral dosage regimen of terbutaline sulphate is 5 mg twice or thrice daily, the plasma half-life is approximate 3-4 h and it produces GI irritation with extensive first pass metabolism. Hence, terbutaline sulphate was chosen as a model drug with an aim to develop controlled release system. Different formulations of ethyl cellulose were prepared by phase inversion technique using different concentrations of sorbitol as pore forming agent. It was found that the thickness of the prepared asymmetric membrane capsules was increased with increase in concentration of ethyl cellulose and pore forming agent, i.e. sorbitol. The dye release study in water and 10% sodium chloride solution indicates that, the asymmetric membrane capsules follow osmotic principle to release content. The pores formed due to sorbitol were confirmed by microscopic observation of transverse section of capsule membrane. Data of in vitro release study of terbutaline sulphate from asymmetric membrane capsules indicated that, the capsules prepared with 10% and 12.5% of ethyl cellulose and 25% of sorbitol released as much as 97.44% and 76.27% in 12 h, respectively with zero order release rate. Hence asymmetric membrane capsule of 10% ethyl cellulose and 25% of sorbitol is considered as optimum for controlled oral delivery of terbutaline sulphate. PMID:23204625

  18. Organically functionalized mesoporous silica as a support for synthesis and catalysis

    Science.gov (United States)

    McEleney, Kevin Andrew

    Mesoporous silicates are excellent materials for supported catalysis due to their ease of functionalization, tunable pore size and high surface areas. Mesoporous silicates have been utilized in a variety of applications such as drug delivery scaffolds and catalyst supports. Functionalization of the surface can be achieved by either grafting of alkoxy silanes or co-condensation of the organosilane with the inorganic silica source. My research in this area can be divided into two components. In the first, we address the significant issue of metal contamination after reactions that are catalyzed by transition metals. In the second, we examine the design of new catalysts based on organic/inorganic composites. Ruthenium catalyzed processes such as olefin metathesis or asymmetric hydrogenation, are often underutilized due to the difficulty of removing the ruthenium by-products. Attempts to remove ruthenium involve treating the solution with a scavenging reagent followed by silica chromatography. Often these scavenging agents are expensive phosphines or toxic agents like lead tetra-acetate. SBA-15 functionalized with aminopropyl triethoxysilane displays a high affinity for ruthenium. Furthermore, it can be utilized to remove ruthenium by-products from olefin metathesis or hydrogenation reactions without the need for silica chromatography. We have also prepared sulfur-functionalized mesoporous silicates that have a high affinity for palladium. The materials after loading prove to be active catalysts for a variety of palladium catalyzed processes such as Suzuki-Miyaura and Sonogashira couplings. The catalysts are recyclable with moderate loss of activity and structure, depending on the method of incorporation of the thiol. We have characterized the as-synthesized and used catalysts by nitrogen sorption, TEM, X-ray photoelectron spectroscopy (XPS) and a variety of homogeneity tests were performed on the catalysts. Periodic mesoporous organosilicates (PMOs) are a well known

  19. Asymmetric counter propagation of domain walls

    Science.gov (United States)

    Andrade-Silva, I.; Clerc, M. G.; Odent, V.

    2016-07-01

    Far from equilibrium systems show different states and domain walls between them. These walls, depending on the type of connected equilibria, exhibit a rich spatiotemporal dynamics. Here, we investigate the asymmetrical counter propagation of domain walls in an in-plane-switching cell filled with a nematic liquid crystal. Experimentally, we characterize the shape and speed of the domain walls. Based on the molecular orientation, we infer that the counter propagative walls have different elastic deformations. These deformations are responsible of the asymmetric counter propagating fronts. Theoretically, based on symmetry arguments, we propose a simple bistable model under the influence of a nonlinear gradient, which qualitatively describes the observed dynamics.

  20. Asymmetric acoustic transmission in multiple frequency bands

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Hong-xiang, E-mail: jsdxshx@ujs.edu.cn [Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013 (China); Laboratory of Modern Acoustics, Institute of Acoustics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China); State Key Laboratory of Acoustics, Institute of Acoustics, Chinese Academy of Sciences, Beijing 100190 (China); Yuan, Shou-qi, E-mail: Shouqiy@ujs.edu.cn [Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013 (China); Zhang, Shu-yi [Laboratory of Modern Acoustics, Institute of Acoustics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China)

    2015-11-23

    We report both experimentally and numerically that the multi-band device of the asymmetric acoustic transmission is realized by placing two periodic gratings with different periods on both sides of two brass plates immersed in water. The asymmetric acoustic transmission can exist in four frequency bands below 1500 kHz, which arises from the interaction between various diffractions from the two gratings and Lamb modes in the brass plates immersed in water. The results indicate that the device has the advantages of multiple band, broader bandwidth, and simpler structure. Our finding should have great potential applications in ultrasonic devices.

  1. Cell-sized asymmetric lipid vesicles facilitate the investigation of asymmetric membranes

    Science.gov (United States)

    Kamiya, Koki; Kawano, Ryuji; Osaki, Toshihisa; Akiyoshi, Kazunari; Takeuchi, Shoji

    2016-09-01

    Asymmetric lipid giant vesicles have been used to model the biochemical reactions in cell membranes. However, methods for producing asymmetric giant vesicles lead to the inclusion of an organic solvent layer that affects the mechanical and physical characteristics of the membrane. Here we describe the formation of asymmetric giant vesicles that include little organic solvent, and use them to investigate the dynamic responses of lipid molecules in the vesicle membrane. We formed the giant vesicles via the inhomogeneous break-up of a lipid microtube generated by applying a jet flow to an asymmetric planar lipid bilayer. The asymmetric giant vesicles showed a lipid flip-flop behaviour in the membrane, superficially similar to the lipid flip-flop activity observed in apoptotic cells. In vitro synthesis of membrane proteins into the asymmetric giant vesicles revealed that the lipid asymmetry in bilayer membranes improves the reconstitution ratio of membrane proteins. Our asymmetric giant vesicles will be useful in elucidating lipid–lipid and lipid–membrane protein interactions involved in the regulation of cellular functions.

  2. A sustainable method inspired by nature for the production of original bi-functional nutraceuticals containing prebiotic fibers and highly bio-available forms of calcium and magnesium

    OpenAIRE

    Goffin, Dorothée; Blecker, Christophe; Paquot, Michel

    2012-01-01

    A sustainable method inspired by nature is proposed leading to an original bifunctional product active on gut health, metabolism regulation, immunity and mineral fortification, fighting against topical chronic diseases (type2 diabetes, osteoporosis, colon cancer…). Peer reviewed

  3. On the molecular basis of D-bifunctional protein deficiency type III.

    Directory of Open Access Journals (Sweden)

    Maija L Mehtälä

    Full Text Available Molecular basis of D-bifunctional protein (D-BP deficiency was studied with wild type and five disease-causing variants of 3R-hydroxyacyl-CoA dehydrogenase fragment of the human MFE-2 (multifunctional enzyme type 2 protein. Complementation analysis in vivo in yeast and in vitro enzyme kinetic and stability determinants as well as in silico stability and structural fluctuation calculations were correlated with clinical data of known patients. Despite variations not affecting the catalytic residues, enzyme kinetic performance (K(m, V(max and k(cat of the recombinant protein variants were compromised to a varying extent and this can be judged as the direct molecular cause for D-BP deficiency. Protein stability plays an additional role in producing non-functionality of MFE-2 in case structural variations affect cofactor or substrate binding sites. Structure-function considerations of the variant proteins matched well with the available data of the patients.

  4. Experimental verifications on chemical carcinogenesis, a bifunctional alkylation between DNA interstrands

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    It is evidenced by the filter elution method that two carcinogenic aromatic hydrocarbons, benzo[a]pyrene and dibenzo[a,h]anthracene, two carcinogenic metal salts, beryllium chloride and cadmium chloride, four carcinogenic aromatic amines, 2-aminofluorene, β-naphthylamine, 4-aminobiphenyl and benzidine, can all induce DNA interstrand and DNA-protein cross-link in L1210 culture. However, under the same condition, the corresponding non-carcinogenic compounds, including benzo[k]fluorancene, anthracene, magnesium chloride, zinc chloride, a -naphthylamine, 2-aminobiphenyl and m-toluidine, cannot produce any cross-link adducts. All these results are consistent with the di-region theory that carcinogens are bio-bifunctional alkylation agents. This method can also be used to discriminate carcinogens and non-carcinogens.

  5. Stable expression of a bifunctional diterpene synthase in the chloroplast of Chlamydomonas reinhardtii

    DEFF Research Database (Denmark)

    Zedler, Julie A Z; Gangl, Doris; Hamberger, Björn Robert;

    2015-01-01

    Chlamydomonas reinhardtii has been shown to hold significant promise as a production platform for recombinant proteins, but transformation of the nuclear genome is still a non-trivial process due to random gene insertion and frequent silencing. Insertion of transgenes into the chloroplasts...... is an alternative strategy, and we report here the stable expression of a large (91 kDa) protein in the chloroplast using a recently developed low-cost transformation protocol. Moreover, selection of transformants is based on restoration of prototrophy using an endogenous gene (psbH) as the marker, thereby allowing...... the generation of transgenic lines without the use of antibiotic-resistance genes. Here, we have expressed a bifunctional diterpene synthase in C. reinhardtii chloroplasts. Homoplasmic transformants were obtained with the expressed enzyme accounting for 3.7 % of total soluble protein. The enzyme was purified...

  6. Basic evaluation of [sup 67]Ga labeled digoxin derivative as a metal-labeled bifunctional radiopharmaceutical

    Energy Technology Data Exchange (ETDEWEB)

    Fujibayashi, Yasuhisa; Konishi, Junji (Kyoto Univ. (Japan). Faculty of Medicine); Takemura, Yasutaka; Taniuchi, Hideyuki; Iijima, Naoko; Yokoyama, Akira

    1993-11-01

    To develop metal-labeled digoxin radiopharmaceuticals with affinity with anti-digoxin antibody as well as Na[sup +], K[sup +]-ATPase, a digoxin derivative conjugated with deferoxamine was synthesized. The derivative had a high binding affinity with [sup 67]Ga at deferoxamine introduced to the terminal sugar ring of digoxin. The [sup 67]Ga labeled digoxin derivative showed enough in vitro binding affinity and selectivity to anti-digoxin antibody as well as Na[sup +], K[sup +]-ATPase. The [sup 67]Ga labeled digoxin derivative is considered to be a potential metal-labeled bifunctional radiopharmaceutical for digoxin RIA as well as myocardial Na[sup +], K[sup +]-ATPase imaging. (author).

  7. A Bifunctional Electrocatalyst for Oxygen Evolution and Oxygen Reduction Reactions in Water

    Science.gov (United States)

    Faschinger, Felix; Chattopadhyay, Samir; Bhakta, Snehadri; Mondal, Biswajit; Elemans, Johannes A. A. W.; Müllegger, Stefan; Tebi, Stefano; Koch, Reinhold; Klappenberger, Florian; Paszkiewicz, Mateusz; Barth, Johannes V.; Rauls, Eva; Aldahhak, Hazem; Schmidt, Wolf Gero

    2016-01-01

    Abstract Oxygen reduction and water oxidation are two key processes in fuel cell applications. The oxidation of water to dioxygen is a 4 H+/4 e− process, while oxygen can be fully reduced to water by a 4 e−/4 H+ process or partially reduced by fewer electrons to reactive oxygen species such as H2O2 and O2 −. We demonstrate that a novel manganese corrole complex behaves as a bifunctional catalyst for both the electrocatalytic generation of dioxygen as well as the reduction of dioxygen in aqueous media. Furthermore, our combined kinetic, spectroscopic, and electrochemical study of manganese corroles adsorbed on different electrode materials (down to a submolecular level) reveals mechanistic details of the oxygen evolution and reduction processes.

  8. Synthesis of acrylic and allylic bifunctional cross-linking monomers derived from PET waste

    Science.gov (United States)

    Cruz-Aguilar, A.; Herrera-González, A. M.; Vázquez-García, R. A.; Navarro-Rodríguez, D.; Coreño, J.

    2013-06-01

    An acrylic and two novel allylic monomers synthesized from bis (hydroxyethyl) terephthalate, BHET, are reported. This was obtained by glycolysis of post-consumer PET with boiling ethylene glycol. The bifunctional monomer bis(2-(acryloyloxy)ethyl) terephthalate was obtained from acryloyl chloride, while the allylic monomers 2-(((allyloxi)carbonyl)oxy) ethyl (2-hydroxyethyl) terephthalate and bis(2-(((allyloxi)carbonyl)oxy)ethyl) terephthalate, from allyl chloroformate. Cross-linking was studied in bulk polymerization using two different thermal initiators. Monomers were analyzed by means of 1H NMR and the cross-linked polymers by infrared spectroscopy. Gel content higher than 90% was obtained for the acrylic monomer. In the case of the mixture of the allylic monomers, the cross-linked polymer was 80 % using BPO initiator, being this mixture 24 times less reactive than the acrylic monomer.

  9. Novel 3-nitrotriazole-based amides and carbinols as bifunctional antichagasic agents.

    Science.gov (United States)

    Papadopoulou, Maria V; Bloomer, William D; Lepesheva, Galina I; Rosenzweig, Howard S; Kaiser, Marcel; Aguilera-Venegas, Benjamín; Wilkinson, Shane R; Chatelain, Eric; Ioset, Jean-Robert

    2015-02-12

    3-Nitro-1H-1,2,4-triazole-based amides with a linear, rigid core and 3-nitrotriazole-based fluconazole analogues were synthesized as dual functioning antitrypanosomal agents. Such compounds are excellent substrates for type I nitroreductase (NTR) located in the mitochondrion of trypanosomatids and, at the same time, act as inhibitors of the sterol 14α-demethylase (T. cruzi CYP51) enzyme. Because combination treatments against parasites are often superior to monotherapy, we believe that this emerging class of bifunctional compounds may introduce a new generation of antitrypanosomal drugs. In the present work, the synthesis and in vitro and in vivo evaluation of such compounds is discussed. PMID:25580906

  10. Cage-like bifunctional chelators, copper-64 radiopharmaceuticals and PET imaging using the same

    Energy Technology Data Exchange (ETDEWEB)

    Conti, Peter S.; Cai, Hancheng; Li, Zibo; Liu, Shuanglong

    2016-08-02

    Disclosed is a class of versatile Sarcophagine based bifunctional chelators (BFCs) containing a hexa-aza cage for labeling with metals having either imaging, therapeutic or contrast applications radiolabeling and one or more linkers (A) and (B). The compounds have the general formula ##STR00001## where A is a functional group selected from group consisting of an amine, a carboxylic acid, an ester, a carbonyl, a thiol, an azide and an alkene, and B is a functional group selected from the group consisting of hydrogen, an amine, a carboxylic acid, and ester, a carbonyl, a thiol, an azide and an alkene. Also disclosed are conjugate of the BFC and a targeting moiety, which may be a peptide or antibody. Also disclosed are metal complexes of the BFC/targeting moiety conjugates that are useful as radiopharmaceuticals, imaging agents or contrast agents.

  11. Bi-Functional Biobased Packing of the Cassava Starch, Glycerol, Licuri Nanocellulose and Red Propolis

    Science.gov (United States)

    Costa, Samantha Serra; Druzian, Janice Izabel; Machado, Bruna Aparecida Souza; de Souza, Carolina Oliveira; Guimarães, Alaíse Gil

    2014-01-01

    The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4%) and glycerol (1.0%), reinforced with cellulose nanocrystals (0–1%) and activated with alcoholic extracts of red propolis (0.4 to 1.0%). The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phenolic compounds and mechanical properties. The antimicrobial and antioxidant efficacy of the films were evaluated by monitoring the use of the active films for packaging cheese curds and butter, respectively. The cellulose nanocrystals increased the mechanical strength of the films and reduced the water permeability and water activity. The active film had an antimicrobial effect on coagulase-positive staphylococci in cheese curds and reduced the oxidation of butter during storage. PMID:25383783

  12. Bifunctional enzyme FBPase/SBPase is essential for photoautotrophic growth in cyanobacterium Synechocystis sp. PCC 6803

    Institute of Scientific and Technical Information of China (English)

    Chunlan Yan; Xudong Xu

    2008-01-01

    From a random insertion mutant library of Synechocystis sp. PCC 6803, a mutant defective in photoautotrophic growth was obtained. The interrupted gene was identified to be sir2094 (fbpl), which encodes the fructose-l,6-biphosphatase (FBPase)/sedoheptu-lose-1,7-biphosphatase (SBPase) bifunctional enzyme (F-I). Two other independently constructed slr2094 mutants showed an identical phenotype. The FBPase activity was found to be virtually lacking in an sir2094 mutant, which was sensitive to light under mixotrophic growth conditions. These results indicate that sir2094 is the only active FBPase-encoding gene in this cyanobacterium. Inactivation of photosystem 11 by interrupting psbB in sir2094 mutant alleviated the sensitiveness to light. This report provides the direct genetic evi-dence for the essential role of F-I in the photosynthesis of Synechocystis sp. PCC 6803.

  13. Bifunctional hairy silica nanoparticles as high-performance additives for lubricant

    Science.gov (United States)

    Sui, Tianyi; Song, Baoyu; Wen, Yu-Ho; Zhang, Feng

    2016-03-01

    Bifunctional hairy silica nanoparticles (BHSNs), which are silica nanoparticles covered with alkyl and amino organic chains, were prepared as high-performance additives for lubricants. Compared with hairy silica nanoparticles covered by a single type of organic chain, binary hairy silica nanoparticles exhibit the advantages of both types of organic chains, which exhibit excellent compatibility with lubricants and adsorbability to metal surfaces. Nanoparticles with different ratios of amino and alkyl ligands were investigated. In comparison to an untreated lubricant, BHSNs reduce the friction coefficient and wear scar diameter by 40% and 60%, respectively. The wear mechanism of BHSNs was investigated, and the protective and filling effect of the nanoparticles improved because of collaboration of amino and alkyl ligands.

  14. Dyes as bifunctional markers of DNA hybridization on surfaces and mutation detection.

    Science.gov (United States)

    García-Mendiola, Tania; Cerro, María Ramos; López-Moreno, José María; Pariente, Félix; Lorenzo, Encarnación

    2016-10-01

    The interaction of small molecules with DNA has found diagnostic and therapeutic applications. In this work, we propose the use of two different dyes, in particular Azure A and Safranine, as bifunctional markers of on-surface DNA hybridization and potent tools for screening of specific gene mutations directly in real DNA PCR amplicons extracted from blood cells. By combining spectroscopic and electrochemical methods we demonstrate that both dyes can interact with single and double stranded DNA to a different extent, allowing reliable hybridization detection. From these data, we have also elucidated the nature of the interaction. We conclude that the binding mode is fundamentally intercalative with an electrostatic component. The dye fluorescence allows their use as nucleic acid stains for the detection of on-surfaces DNA hybridization. Its redox activity is exploited in the development of selective electrochemical DNA biosensors. PMID:27317997

  15. RNA Secondary Structure Modulates FMRP's Bi-Functional Role in the MicroRNA Pathway.

    Science.gov (United States)

    Kenny, Phillip; Ceman, Stephanie

    2016-01-01

    MicroRNAs act by post-transcriptionally regulating the gene expression of 30%-60% of mammalian genomes. MicroRNAs are key regulators in all cellular processes, though the mechanism by which the cell activates or represses microRNA-mediated translational regulation is poorly understood. In this review, we discuss the RNA binding protein Fragile X Mental Retardation Protein (FMRP) and its role in microRNA-mediated translational regulation. Historically, FMRP is known to function as a translational suppressor. However, emerging data suggests that FMRP has both an agonistic and antagonistic role in regulating microRNA-mediated translational suppression. This bi-functional role is dependent on FMRP's interaction with the RNA helicase Moloney leukemia virus 10 (MOV10), which modifies the structural landscape of bound mRNA, therefore facilitating or inhibiting its association with the RNA-Induced Silencing Complex. PMID:27338369

  16. Mono- and bi-functional arenethiols as surfactants for gold nanoparticles: synthesis and characterization

    Directory of Open Access Journals (Sweden)

    Fratoddi Ilaria

    2011-01-01

    Full Text Available Abstract Stable gold nanoparticles stabilized by different mono and bi-functional arenethiols, namely, benzylthiol and 1,4-benzenedimethanethiol, have been prepared by using a modified Brust's two-phase synthesis. The size, shape, and crystalline structure of the gold nanoparticles have been determined by high-resolution electron microscopy and full-pattern X-ray powder diffraction analyses. Nanocrystals diameters have been tuned in the range 2 ÷ 9 nm by a proper variation of Au/S molar ratio. The chemical composition of gold nanoparticles and their interaction with thiols have been investigated by X-ray photoelectron spectroscopy. In particular, the formation of networks has been observed with interconnected gold nanoparticles containing 1,4-benzenedimethanethiol as ligand.

  17. Bifunctional Nanoparticle-SILP Catalysts (NPs@SILP) for the Selective Deoxygenation of Biomass Substrates

    Energy Technology Data Exchange (ETDEWEB)

    Luska, Kylie L. [RWTH Aachen Univ. (Germany); Julis, Jennifer [RWTH Aachen Univ. (Germany); Evonik Industries AG, Marl (Germany); Stavitski, Eli [Brookhaven National Lab. (BNL), Upton, NY (United States); Zakharov, Dmitri N. [Brookhaven National Lab. (BNL), Upton, NY (United States); Adams, Alina [RWTH Aachen Univ. (Germany); Leitner, Walter [RWTH Aachen Univ. (Germany); Max Planck Inst. for Coal Research, Ruhr (Germany)

    2014-08-27

    We immobilized ruthenium nanoparticles onto an acidic supported ionic liquid phase (RuNPs@SILP) in the development of bifunctional catalysts for the selective deoxygenation of biomass substrates. RuNPs@SILPs possessed high catalytic activities, selectivities and recyclabilities in the hydrogenolytic deoxygenation and ring opening of C8- and C9-substrates derived from furfural or 5-hydroxymethylfurfural and acetone. When we tailor the acidity of the SILP through the ionic liquid loading provided a molecular parameter by which the catalytic activity and selectivity of the RuNPs@SILPs were controlled to provide a flexible catalyst system toward the formation of different classes of value-added products: cyclic ethers, primary alcohols or aliphatic ethers.

  18. Recent Development of Bifunctional Small Molecules to Study Metal-Amyloid-β Species in Alzheimer's Disease.

    Science.gov (United States)

    Braymer, Joseph J; Detoma, Alaina S; Choi, Jung-Suk; Ko, Kristin S; Lim, Mi Hee

    2010-12-08

    Alzheimer's disease (AD) is a multifactorial neurodegenerative disease related to the deposition of aggregated amyloid-β (Aβ) peptides in the brain. It has been proposed that metal ion dyshomeostasis and miscompartmentalization contribute to AD progression, especially as metal ions (e.g., Cu(II) and Zn(II)) found in Aβ plaques of the diseased brain can bind to Aβ and be linked to aggregation and neurotoxicity. The role of metal ions in AD pathogenesis, however, is uncertain. To accelerate understanding in this area and contribute to therapeutic development, recent efforts to devise suitable chemical reagents that can target metal ions associated with Aβ have been made using rational structure-based design that combines two functions (metal chelation and Aβ interaction) in the same molecule. This paper presents bifunctional compounds developed by two different design strategies (linkage or incorporation) and discusses progress in their applications as chemical tools and/or potential therapeutics.

  19. Bi-functional biobased packing of the cassava starch, glycerol, licuri nanocellulose and red propolis.

    Science.gov (United States)

    Costa, Samantha Serra; Druzian, Janice Izabel; Machado, Bruna Aparecida Souza; de Souza, Carolina Oliveira; Guimarães, Alaíse Gil

    2014-01-01

    The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4%) and glycerol (1.0%), reinforced with cellulose nanocrystals (0-1%) and activated with alcoholic extracts of red propolis (0.4 to 1.0%). The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phenolic compounds and mechanical properties. The antimicrobial and antioxidant efficacy of the films were evaluated by monitoring the use of the active films for packaging cheese curds and butter, respectively. The cellulose nanocrystals increased the mechanical strength of the films and reduced the water permeability and water activity. The active film had an antimicrobial effect on coagulase-positive staphylococci in cheese curds and reduced the oxidation of butter during storage.

  20. Bi-functional biobased packing of the cassava starch, glycerol, licuri nanocellulose and red propolis.

    Directory of Open Access Journals (Sweden)

    Samantha Serra Costa

    Full Text Available The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4% and glycerol (1.0%, reinforced with cellulose nanocrystals (0-1% and activated with alcoholic extracts of red propolis (0.4 to 1.0%. The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phenolic compounds and mechanical properties. The antimicrobial and antioxidant efficacy of the films were evaluated by monitoring the use of the active films for packaging cheese curds and butter, respectively. The cellulose nanocrystals increased the mechanical strength of the films and reduced the water permeability and water activity. The active film had an antimicrobial effect on coagulase-positive staphylococci in cheese curds and reduced the oxidation of butter during storage.