WorldWideScience

Sample records for beryllium 11 reactions

  1. Nitrogen reactivity toward beryllium: surface reactions.

    Science.gov (United States)

    Allouche, A

    2013-06-01

    Recent experiments with nitrogen as a seeding gas in fusion plasma devices together with the option of using beryllium as an armor material in the future ITER tokamak (International Thermonuclear Experimental Reactor) have raised new interest in the interactions of beryllium surfaces with nitrogen (atomic or molecular). The strong reactivity of nitrogen implies the formation of beryllium nitrite and, in conjunction with oxygen and other possible impurities, experimentalists have to consider the probability of generating various complex moieties such as imine, amine or oxyamine, and amide radicals. This chemistry would obviously dramatically perturb the plasma, and quantum investigations can be of great predictive help. Nitrogen adsorption on beryllium basal surfaces is investigated through quantum density functional theory. Different situations are examined: molecular or atomic nitrogen reactions; nitride radical adsorption or formation on surfaces; hydrogen retention on surfaces; combined nitrogen/oxygen reactivity and hydrogen retention. A tentative comparison with experiment is also proposed. PMID:23594802

  2. Electromagnetic properties of the Beryllium-11 nucleus in Halo EFT

    OpenAIRE

    Hammer H.-W.; Phillips D.R.

    2010-01-01

    We compute electromagnetic properties of the Beryllium-11 nucleus using an effective field theory that exploits the separation of scales in this halo system. We fix the parameters of the EFT from measured data on levels and scattering lengths in the 10Be plus neutron system. We then obtain predictions for the B(E1) strength of the 1/2+ to 1/2− transition in the 11Be nucleus. We also compute the charge radius of the ground state of 11Be. Agreement with experiment within the expected accurac...

  3. Electromagnetic properties of the Beryllium-11 nucleus in Halo EFT

    Directory of Open Access Journals (Sweden)

    Hammer H.-W.

    2010-04-01

    Full Text Available We compute electromagnetic properties of the Beryllium-11 nucleus using an effective field theory that exploits the separation of scales in this halo system. We fix the parameters of the EFT from measured data on levels and scattering lengths in the 10Be plus neutron system. We then obtain predictions for the B(E1 strength of the 1/2+ to 1/2− transition in the 11Be nucleus. We also compute the charge radius of the ground state of 11Be. Agreement with experiment within the expected accuracy of a leading-order computation in this EFT is obtained. We also indicate how higher-order corrections that affect both s-wave and p-wave 10 Be-neutron interactions will affect our results.

  4. Technique of beryllium determination using an (α,n) reaction

    International Nuclear Information System (INIS)

    The possibility of detecting small amounts of 9Be using the (α, n) reaction has been investigated. It is shown that at a 210Po α-particle source intensity of 3x108 s-1 for limit of the detectable amount of beryllium is equal to 0.1 μg in the case of recording neutron-gamma (>= 3.6 MeV) coincidences. Other light elements (B, F, Al, Mg, Si etc.) do not produce a noticeable background under such conditions

  5. Electric properties of the Beryllium-11 system in Halo EFT

    International Nuclear Information System (INIS)

    We compute E1 transitions and electric radii in the Beryllium-11 nucleus using an effective field theory that exploits the separation of scales in this halo system. We fix the leading-order parameters of the EFT from measured data on the 1/2+ and 1/2- levels in 11Be and the B(E1) strength for the transition between them. We then obtain predictions for the B(E1) strength for Coulomb dissociation of the 11Be nucleus to the continuum. We also compute the charge radii of the 1/2+ and 1/2- states. Agreement with experiment within the expected accuracy of a leading-order computation in this EFT is obtained. We also discuss how next-to-leading-order (NLO) corrections involving both s-wave and p-wave 10Be-neutron interactions affect our results, and display the NLO predictions for quantities which are free of additional short-distance operators at this order. Information on neutron-10Be scattering in the relevant channels is inferred.

  6. Beryllium allergy

    International Nuclear Information System (INIS)

    Beryllium is not only a high potent allergen, but also a fotoallergen and can provoke contact allergic reactions, fotoallergic reactions, granulomatous skin reactions, pulmonary granulomatous diseases and sometimes even systemic diseases. The authors present 9 own cases of a patch test positive beryllium allergy, 7 patients with relevant allergy and 5 patients with an allergic contact stomatitis. (author)

  7. Beryllium-steam interaction experiments and self-sustained reaction studies (integral validation testing)

    International Nuclear Information System (INIS)

    In accordance with the Task Agreement G 81 TT 02 FR, Be-steam interaction experiments were performed in order to obtain experimental data for validation of calculation codes analyzing accident situation involving water coolant ingress into the vacuum chamber of International Thermonuclear Experimental Reactor (ITER). The report describes the experimental facility, specimens used for oxidized beryllium emissivity factor determination and the ITER first wall mock-up used in the experiments on its interaction with steam. Experimental results on Be-emissivity factor after beryllium oxidation versus temperature are given. Four experimental runs of the ITER first wall mock-up interaction with steam were carried out for initial conditions when internal (beryllium) mock-up layer was heated to temperatures of 680, 880 and 1273 K and steam temperature was of 413-423 K. The plots of temperature evolution for beryllium, bronze and stainless steel layers versus time were obtained. Temperature records with 5 s interval are presented. Hydrogen gain in these four experimental runs was measured. The data may be used for computer code validation. No self-sustained Be-steam chemical reaction at temperatures used in the experiments was observed

  8. Reactions induced by 11Be beam at Rex-Isolde

    Directory of Open Access Journals (Sweden)

    Jeppesen H.

    2011-10-01

    Full Text Available The collision induced by the three Beryllium isotopes, 9,10,11Be, on a 64Zn target were investigated at Ec.m. ≈ 1.4 the Coulomb barrier. The experiments with the radioactive 10,11Be beams were performed at the Rex-Isolde facility at CERN. In the case of 9,10Be, elastic scattering angular distributions were measured whereas, in the 11Be case, the quasielastic scattering angular distribution was obtained. A strong damping of the quasielastic cross-section was observed in the 11Be case, in the angular range around the Coulomb-nuclear interference peak. In this latter case a large total-reaction cross-section is found. Such a cross-section is more than a factor of two larger than the ones extracted in the reactions induced by the non-halo Beryllium isotopes. A large contribution to the total-reaction cross-section in the 11Be case could be attributed to transfer and/or break-up events.

  9. Spectrophotometric determination of beryllium in air by a sensitised chrome azurol S reaction

    International Nuclear Information System (INIS)

    Although many spectrophotometric reagents for beryllium are known, their sensitivities do not approach that provided by the fluorimetric method using morin. A spectrophotometric method of comparable sensitivity is reported wherein addition of cetylpyridinium bromide considerably enhances the colour intensity of the beryllium - Chrome Azurol S complex. EDTA serves as a suitable masking agent for eliminating interferences from commonly associated ions. The results obtained are compared with those obtained with the morin method. Similar sensitisation of the beryllium - Chrome Azurol S system by polyoxyethylene dodecylamine and poly(vinyl alcohol) has been reported. (author)

  10. Elastic scattering and direct reactions of the 1n halo 11Be nucleus on 64Zn near the barrier

    OpenAIRE

    Scuderi, V.; Di Pietro, A.; Acosta Sánchez, Luis Armando; Amorini, F.; Borge, M. J. G.; Figuera, P; Fisichella, M.; Fraile, L. M.; Gómez Camacho, Joaquín; Jeppesen, H.; Lattuada, M.; Martel Bravo, Ismael; Milin, M.; Musumarra, A.; Papa, M.

    2012-01-01

    Elastic scattering and direct reactions have been studied for the collisions induced by the three Beryllium isotopes 9,10,11Be, on a medium mass 64Zn target at energies near the Coulomb barrier. The elastic-scattering angular distribution of the 11Be halo nucleus shows a deviation from the classical Fresnel type diffraction behavior in the Coulomb-nuclear interference peak angular region. The deduced total reaction cross-sections for the 11Be collision is more than a factor of ...

  11. Reactivity test between beryllium and copper

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H. [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan); Kato, M. [NGK Insulators, Ltd., Aichi-ken (Japan)

    1995-09-01

    Beryllium has been expected for using as plasma facing material on ITER. And, copper alloy has been proposed as heat sink material behind plasma facing components. Therefore, both materials must be joined. However, the elementary process of reaction between beryllium and copper alloy does not clear in detail. For example, other authors reported that beryllium reacted with copper at high temperature, but it was not obvious about the generation of reaction products and increasing of the reaction layer. In the present work, from this point, for clarifying the elementary process of reaction between beryllium and copper, the out-of-pile compatibility tests were conducted with diffusion couples of beryllium and copper which were inserted in the capsule filled with high purity helium gas (6N). Annealing temperatures were 300, 400, 500, 600 and 700{degrees}C, and annealing periods were 100, 300 and 1000h. Beryllium specimens were hot pressed beryllium, and copper specimens were OFC (Oxygen Free Copper).

  12. ReBe2B5O11 (Re = Y, Gd)- A Series of Rare Earth Beryllium Borates as Deep-Ultraviolet Nonlinear Optical Materials

    OpenAIRE

    Yan, Xue; Luo, Siyang; Yao, Jiyong; He, Ran; Yue, Yinchao; Lin, Zheshuai; Chen, Chuangtian

    2013-01-01

    The rapid developments of the deep-ultraviolet (deep-UV) laser science and technology urgently demand the nonlinear optical crystals which have large band gap enough to transmit the deep-UV light. Herein, we synthesized a series of new rare earth beryllium borates: ReBe2B5O11 (Re = Y, Gd). The structures of all these materials, for both alpha and beta phases, are featured by a novel platelike infinite superlayer [Be2B5O11]3-. Each [Be2B5O11]3- layer is further connected to the neighbor superl...

  13. Beryllium Toxicity

    Science.gov (United States)

    ... Favorites Del.icio.us Digg Facebook Google Bookmarks Yahoo MyWeb Beryllium Toxicity Patient Education Care Instruction Sheet ... Favorites Del.icio.us Digg Facebook Google Bookmarks Yahoo MyWeb Page last reviewed: May 23, 2008 Page ...

  14. An investigation of nuclear reactions useful for the detection of beryllium

    International Nuclear Information System (INIS)

    Nuclear techniques for the detection of trace element quantities of 9Be in environmental and biological samples have been investigated. A literature search has been made for suitable nuclear reactions using p, d, α, n and photons as incoming particles. The reactions 9Be(p,αγ)6Li, 9Be(d,nγ)10Be, 9Be(α,nγ)12C and 9Be(γ,n)8Be seems to be usable for 9Be concentrations in the order of ppm. Experimentally, the possibility 9Be(p,αγ)6Li has been tested at the resonance which occurs for Esub(p) = 2.567 MeV with a width of 39 keV and a cross-section of 110 mb. A Ge(Li) detector was used to detect the gamma-ray of energy 2.561 MeV for 6Li. Although the detection limit does not seem to be below 1 ppm for this reaction, it might be useful to establish an upper limit for the 9Be concentration in the range 1-20 ppm during conventional PIXE analyses just be monitoring the 3561 MeV gamma-ray in a suitable detector. (M.L.)

  15. Defense programs beryllium good practice guide

    International Nuclear Information System (INIS)

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D ampersand D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is

  16. Method for welding beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, R.D.; Smith, F.M.; O`Leary, R.F.

    1995-12-31

    A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon. Beryllium parts made using this method can be used as structural components in aircraft, satellites and space applications.

  17. Beryllium usage in fusion blankets and beryllium data needs

    International Nuclear Information System (INIS)

    Increasing numbers of designers are choosing beryllium for fusion reactor blankets because it, among all nonfissile materials, produces the highest number (2.5 neutron in an infinite media) of neutrons per 14-MeV incident neutron. In amounts of about 20 cm of equivalent solid density, it can be used to produce fissile material, to breed all the tritium consumed in ITER from outboard blankets only, and in designs to produce Co-60. The problem is that predictions of neutron multiplication in beryllium are off by some 10 to 20% and appear to be on the high side, which means that better multiplication measurements and numerical methods are needed. The n,2n reactions result in two helium atoms, which cause radiation damage in the form of hardening at low temperatures (300/degree/C). The usual way beryllium parts are made is by hot pressing the powder. A lower cost method is to cold press and then sinter. There is no radiation damage data on this form of beryllium. The issues of corrosion, safety relative to the release of the tritium built-up inside beryllium, and recycle of used beryllium are also discussed. 10 figs

  18. Method for welding beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, R.D.; Smith, F.M.; O`Leary, R.F.

    1997-04-01

    A method is provided for joining beryllium pieces which comprises: depositing aluminum alloy on at least one beryllium surface; contacting that beryllium surface with at least one other beryllium surface; and welding the aluminum alloy coated beryllium surfaces together. The aluminum alloy may be deposited on the beryllium using gas metal arc welding. The aluminum alloy coated beryllium surfaces may be subjected to elevated temperatures and pressures to reduce porosity before welding the pieces together. The aluminum alloy coated beryllium surfaces may be machined into a desired welding joint configuration before welding. The beryllium may be an alloy of beryllium or a beryllium compound. The aluminum alloy may comprise aluminum and silicon. 9 figs.

  19. Measurement of the neutron spectrum from the reaction of 30-MeV deuterons on a thick beryllium target

    International Nuclear Information System (INIS)

    Measurements were made of the neutron spectrum produced by bombarding a thick beryllium target with 30-MeV deuterons at the University of California, Davis cyclotron. This spectrum is of interest in studying the effect of neutrons on materials to be used in future fusion reactors. The spectrum was inferred from the activation of two sets of detector foils placed at 00 to the deuteron beam, one immediately behind the beryllium target block, and one 40 mm to the rear. A least-squares program was used to analyze the foil activation data to obtain the fluence in each of seven energy groups. The neutron spectrum (fluence/MeV) close to the target decreases continuously with energy in the range 5-32 MeV, while the spectrum 40 mm back has a peak at about 13 MeV. The contribution from neutrons of energies less than 10 MeV is much greater than that found in previous spectral measurements made at large distances from the target. This difference is attributed to the neutrons which are emitted at large angles from the deuteron beam. These observations show the importance of evaluating the neutron spectrum near the target if samples of materials are to be irradiated in this location

  20. Investigation of the mechanism of interaction of Lithium 6 ions on Beryllium 9

    International Nuclear Information System (INIS)

    The objective of this research on the interaction of Lithium 6 and Beryllium 9 ions is to obtain new indications on the mode of interaction of these heavy ions, and on the configuration of target nuclei and projectile nuclei. In a first part, the author presents and describes the experimental conditions which comprise a Van de Graaff accelerator, a source, a stripper, and a target. He reports the study of α particles emitted by the reaction between the Lithium and Beryllium ions: description of the experimental installation (irradiation chamber and method), presentation and interpretation of experimental results. In the next part, he reports the study of Lithium 7 and Beryllium 10 nuclides emitted by disintegration of Beryllium 11: description of experimental conditions, variations of cross sections, variation of the cross section rate, and interpretation. The author then addresses the study of the intervention of the mode of interaction by 15N compound nucleus in the reactions between lithium and beryllium ions: study of intensities of the different spectrum lines, measurement of the Doppler effect produced of the 479 keV line, interpretation of results. In conclusion, the author analyses the mechanism of interaction between lithium and beryllium ions, and discusses different theories: the Newns and Glendenning theories, and the Leigh theory

  1. Defense programs beryllium good practice guide

    Energy Technology Data Exchange (ETDEWEB)

    Herr, M.

    1997-07-01

    Within the DOE, it has recently become apparent that some contractor employees who have worked (or are currently working) with and around beryllium have developed chronic beryllium disease (CBD), an occupational granulomatous lung disorder. Respiratory exposure to aerosolized beryllium, in susceptible individuals, causes an immunological reaction that can result in granulomatous scarring of the lung parenchyma, shortness of breath, cough, fatigue, weight loss, and, ultimately, respiratory failure. Beryllium disease was originally identified in the 1940s, largely in the fluorescent light industry. In 1950, the Atomic Energy Commission (AEC) introduced strict exposure standards that generally curtailed both the acute and chronic forms of the disease. Beginning in 1984, with the identification of a CBD case in a DOE contractor worker, there was increased scrutiny of both industrial hygiene practices and individuals in this workforce. To date, over 100 additional cases of beryllium-specific sensitization and/or CBD have been identified. Thus, a disease previously thought to be largely eliminated by the adoption of permissible exposure standards 45 years ago is still a health risk in certain workforces. This good practice guide forms the basis of an acceptable program for controlling workplace exposure to beryllium. It provides (1) Guidance for minimizing worker exposure to beryllium in Defense Programs facilities during all phases of beryllium-related work, including the decontamination and decommissioning (D&D) of facilities. (2) Recommended controls to be applied to the handling of metallic beryllium and beryllium alloys, beryllium oxide, and other beryllium compounds. (3) Recommendations for medical monitoring and surveillance of workers exposed (or potentially exposed) to beryllium, based on the best current understanding of beryllium disease and medical diagnostic tests available. (4) Site-specific safety procedures for all processes of beryllium that is likely to

  2. Chronic Beryllium Disease

    Science.gov (United States)

    ... an immune response or “allergy” to beryllium metal, ceramic or alloy, termed beryllium sensitization (BeS). Beryllium sensitization occurs after ... Mroz MM, Newman LS. Beryllium disease screening in ceramics industry: Blood test ... at a metal, alloy and oxide production plant. Occup Environ Med 1997; ...

  3. Structure of 10,11Li and the reaction 11Li (p , d)10Li

    Science.gov (United States)

    Fortune, H. T.

    2016-09-01

    I examine the properties of 11Li and the low-lying resonances in 10Li, as they relate to neutron removal from 11Li. Comparison with results from a recent 11Li (p , d) reaction strongly suggests that that experiment observed only the 2+ resonance, and not the 1+.

  4. Beryllium facilities in India

    International Nuclear Information System (INIS)

    Due to its unique combination of physical, mechanical, thermal and nuclear properties, beryllium is indispensable for many applications in the fields of nuclear and space sciences. Beryllia and copper beryllium alloys have also found extensive applications in the electrical and electronic industries. Beryllium facilities at Bhabha Atomic Research Centre (BARC) have been set up to meet indigenous requirements for these materials. Besides developing beryllium technology, the project team has also designed and developed a number of special purpose equipment. (Author)

  5. Beryllium chemistry and processing

    CERN Document Server

    Walsh, Kenneth A

    2009-01-01

    This book introduces beryllium; its history, its chemical, mechanical, and physical properties including nuclear properties. The 29 chapters include the mineralogy of beryllium and the preferred global sources of ore bodies. The identification and specifics of the industrial metallurgical processes used to form oxide from the ore and then metal from the oxide are thoroughly described. The special features of beryllium chemistry are introduced, including analytical chemical practices. Beryllium compounds of industrial interest are identified and discussed. Alloying, casting, powder processing, forming, metal removal, joining and other manufacturing processes are covered. The effect of composition and process on the mechanical and physical properties of beryllium alloys assists the reader in material selection. The physical metallurgy chapter brings conformity between chemical and physical metallurgical processing of beryllium, metal, alloys, and compounds. The environmental degradation of beryllium and its all...

  6. Beryllium. Evaluation of beryllium hydroxide industrial processes. Pt. 3

    International Nuclear Information System (INIS)

    This work continues the 'Beryllium' series. It is a historical review of different industrial processes of beryllium hydroxide obtention from beryllium ores. Flowsheats and operative parameters of five plants are provided. These plants (Degussa, Brush Beryllium Co., Beryllium Corp., Murex Ltd., SAPPI) were selected as representative samples of diverse commercial processes in different countries. (Author)

  7. Spectrophotometric determination of beryllium with sulfochlorophenol S in organo-aqueous acetic-acid media

    International Nuclear Information System (INIS)

    The possibility has been shown of photometric determination of beryllium with sulphochlorophenol S using an acetic acid-propanol mixture (1:1), containing 0.5-1.5 vol% of water, as the reaction medium. Under such conditions, the reaction between beryllium and sulphochlorophenol S is sensitive and selective with respect to some easily hydrolized elements (Sn, Bi, Sb, Hg) as well as to Ga, In, Tl, Zn in the presence of HCl. The following excess amounts do not interfere with the determination of 0.45 μg Be: Hg-1.2x104, Sb-6.2x103, In-2.5x103, Tl-2.0x103, Zn-1.4x103, Ga-1.2x103. The reaction between beryllium and sulphochlorophenol S is selective with respect to a number of complexing agents. Beryllium can be determined in the presence of 150000-200000 times its weight amounts of tartaric, citric and boric acids, 5000-sulphosalycilic acid, 6000-oxalic acid, 6000-dimethyl glyoxime, 150-8-hydroxyquinoline

  8. Beryllium: genotoxicity and carcinogenicity

    International Nuclear Information System (INIS)

    Beryllium (Be) has physical-chemical properties, including low density and high tensile strength, which make it useful in the manufacture of products ranging from space shuttles to golf clubs. Despite its utility, a number of standard setting agencies have determined that beryllium is a carcinogen. Only a limited number of studies, however, have addressed the underlying mechanisms of the carcinogenicity and mutagenicity of beryllium. Importantly, mutation and chromosomal aberration assays have yielded somewhat contradictory results for beryllium compounds and whereas bacterial tests were largely negative, mammalian test systems showed evidence of beryllium-induced mutations, chromosomal aberrations, and cell transformation. Although inter-laboratory differences may play a role in the variability observed in genotoxicity assays, it is more likely that the different chemical forms of beryllium have a significant effect on mutagenicity and carcinogenicity. Because workers are predominantly exposed to airborne particles which are generated during the machining of beryllium metal, ceramics, or alloys, testing of the mechanisms of the mutagenic and carcinogenic activity of beryllium should be performed with relevant chemical forms of beryllium

  9. Heavy ion collision dynamics of 10,11B+10,11B reactions

    Directory of Open Access Journals (Sweden)

    Singh BirBikram

    2015-01-01

    Full Text Available The dynamical cluster-decay model (DCM of Gupta and collaborators has been applied successfully to the decay of very-light (A ∼ 30, light (A ∼ 40−80, medium, heavy and super-heavy mass compound nuclei for their decay to light particles (evaporation residues, ER, fusion-fission (ff, and quasi-fission (qf depending on the reaction conditions. We intend to extend here the application of DCM to study the extreme case of decay of very-light nuclear systems 20,21,22Ne∗ formed in 10,11B+10,11B reactions, for which experimental data is available for their binary symmetric decay (BSD cross sections, i.e., σBSD. For the systems under study, the calculations are presented for the σBSD in terms of their preformation and barrier penetration probabilities P0 and P. Interesting results are that in the decay of such lighter systems there is a competing reaction mechanism (specifically, the deep inelastic orbiting of non-compound nucleus (nCN origin together with ff. We have emipirically estimated the contribution of σnCN. Moreover, the important role of nuclear structure characteristics via P0 as well as angular momentum ℓ in the reaction dynamics are explored in the study.

  10. A study of 11 Be an 11 Li halo nuclei by core breakup reactions

    International Nuclear Information System (INIS)

    The study of light nuclei with large neutron excess are very useful for the understanding of nuclear matter far from stability. The nuclear halo phenomenon has been observed for the first time for Z 11 Be and 11 Li halo nuclei. In this channel, the neutron is supposed not to participate to the reaction and then, when detected, to carry out the same properties as in the halo nucleus. The deduced widths of the neutron momentum distributions are different from the one extracted from the core distributions and with the more recent theoretical models. From these studies, it is also stressed that the properties of the core are essential to understand the halo phenomenon. In particular, the correlation between the core vibrations and the halo neutron are able to explain the emergence of the halo in 11 Be. (author)

  11. Lawrence Livermore Laboratory's beryllium control program for high-explosive test firing bunkers and tables

    International Nuclear Information System (INIS)

    This report on the control program to minimize beryllium levels in Laboratory workplaces includes an outline of beryllium surface, soil, and air levels and an 11-y summary of sampling results from two high-use, high-explosive test firing bunkers. These sampling data and other studies demonstrate that the beryllium control program is functioning effectively

  12. Beryllium Manufacturing Processes

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, A

    2006-06-30

    This report is one of a number of reports that will be combined into a handbook on beryllium. Each report covers a specific topic. To-date, the following reports have been published: (1) Consolidation and Grades of Beryllium; (2) Mechanical Properties of Beryllium and the Factors Affecting these Properties; (3) Corrosion and Corrosion Protection of Beryllium; (4) Joining of Beryllium; (5) Atomic, Crystal, Elastic, Thermal, Nuclear, and other Properties of Beryllium; and (6) Beryllium Coating (Deposition) Processes and the Influence of Processing Parameters on Properties and Microstructure. The conventional method of using ingot-cast material is unsuitable for manufacturing a beryllium product. Beryllium is a highly reactive metal with a high melting point, making it susceptible to react with mold-wall materials forming beryllium compounds (BeO, etc.) that become entrapped in the solidified metal. In addition, the grain size is excessively large, being 50 to 100 {micro}m in diameter, while grain sizes of 15 {micro}m or less are required to meet acceptable strength and ductility requirements. Attempts at refining the as-cast-grain size have been unsuccessful. Because of the large grain size and limited slip systems, the casting will invariably crack during a hot-working step, which is an important step in the microstructural-refining process. The high reactivity of beryllium together with its high viscosity (even with substantial superheat) also makes it an unsuitable candidate for precision casting. In order to overcome these problems, alternative methods have been developed for the manufacturing of beryllium. The vast majority of these methods involve the use of beryllium powders. The powders are consolidated under pressure in vacuum at an elevated temperature to produce vacuum hot-pressed (VHP) blocks and vacuum hot-isostatic-pressed (HIP) forms and billets. The blocks (typically cylindrical), which are produced over a wide range of sizes (up to 183 cm dia. by 61

  13. Beryllium development programme in India

    International Nuclear Information System (INIS)

    India has fairly large deposits of beryl. The requirement of beryllium and copper-beryllium alloys in space and electronic industries has provided the incentive for the setting up of an indigenous base for the development of beryllium process metallurgy. The paper presents the developmental work carried out, in the Metallurgy Division of the Bhabha Atomic Research Centre, on the preparation of beryllium metal and its alloys starting from Indian beryl. A laboratory facility incorporating essential precautionary measures has been set up for the safe handling of beryllium and its compounds. Based on the laboratory investigations a flow-sheet suitable to Indian conditions has been developed. The flow-sheet involves preparation of anhydrous beryllium fluoride from beryl through the silico-fluoride route, magnesiothermic reduction of beryllium fluoride for the production of beryllium metal or its master alloy with copper or aluminium, and fabrication of beryllium metal. (author)

  14. Phase equilibria, compatibility studies and thermal properties of beryllium systems

    International Nuclear Information System (INIS)

    The quality control of commercial beryllium, the examinations of the phase equilibria in beryllium systems as well as the broad field of incompatibility and the reaction kinetics of beryllium with other materials necessitate a sophisticated method for the analysis of this element in micrometer areas. A powerful tool is the wavelength dispersive X-ray microanalyser. Therefore, a commercial synthetic Mo-B4C multilayer X-ray diffracting device with 2 d = 22.2 nm periodicity was used to extend X-ray microanalysis to the ultra-light elements Be and B in an existing instrument. The spectrometer covers a wavelength range between 5.2 and 13 nm. The wavelength of the Be Kα emission line from elemental Be is λ = 11.35 nm and the full width at half maximum is ΔE = 7.2 eV. The optimum working voltage Uo is 10 kV for moderate X-ray mass absorption of the targets. The determination of Be in oxides is less favourable owing to the high mass absorption. Uo has to be reduced to 5 kV. The chemical shift of the Be Kα line in BeO is Δλ = + 0.3 nm relative to pure Be. Beryllium pebbles are foreseen as neutron multipliers in future fusion reactor blanket concepts. Industrial intermediate Be products which had been produced by a modified Kroll process and subsequent reduction of BeF2 using Mg were investigated by X-ray microanalysis. The following precipitates in the Be matrix of 2 mm pebbles partially annealed up to 790 C could be detected: (Mg, Zr, U) Be13, MgBe13, Mg2Si, Al2Mg3 and (Fe, Cr) alloys. The maximum solubility of selected metallic impurities in beryllium annealed at 800 C is: 0.06 mass % Fe, 0.03 mass % Al, 0.02 mass % Si, 5Fe2, Be2C and Cr-Fe-Si were observed in specimens annealed between 870 and 690 C. It is interesting that Al5Fe2 precipitates were observed; however, the phase AlFeBe4 that would have been expected according to the phase diagram of the ternary Al-Be-Fe system was not found. Probably the Fe/Al ratio is too low for AlFeBe4 formation. The high annealing

  15. Estimation of the tritium production and inventory in beryllium

    International Nuclear Information System (INIS)

    Beryllium has been proposed as a candidate material for the neutron multiplier in fusion blanket designs. Tritium will be produced and will accumulate in beryllium under neutron irradiation. The tritium production and inventories under 1.5 and 3.0GW fusion power operation were calculated for a layered pebble bed blanket with lithium oxide (Li2O) breeder and beryllium (Be) multiplier. Neutronics calculations were carried out using the one-dimensional transport code ANISN, and the tritium production due to direct reaction of 9Be(n,T)7Li and the two-step reactions 9Be(n,α)6Li(n,α)Twas taken into account. The tritium production due to the two-step reaction was calculated to be 50% of the total tritium production after 1 year full power operation (FPY). The tritium inventory was estimated by considering three kinetic parameters, the permeability from the breeder region, diffusivity in a beryllium matrix, and solubility. Tritium permeation from the breeder region to the beryllium region through a 316SS wall was as much as 3gh-1, which is 30% of the tritium production (9.6gh-1) in the breeder region. Using the diffusion coefficient of beryllium with no oxide layer on its surface, the total tritium inventory was calculated to be 7gFPY-1, mainly owing to solubility. The content of beryllium oxide significantly affects the effective diffusion coefficient. Using a diffusion coefficient for beryllium with beryllium oxide layer on its surface, the tritium inventory was found to be equal to the amount produced. (orig.)

  16. Status of beryllium study for fusion in RF

    International Nuclear Information System (INIS)

    The main directions of research activities in the field of beryllium application science and technology carried out in Russia during 2001-2003 have been reviewed. The main results of these investigations have been highlighted. First wall and port-limier. The investigation on the actively cooled components with beryllium cladding is under progress objecting on the clarification of their ultimate thermo cycling capabilities. The study of behavior of bulk beryllium and the boundary region of the contact with the cooling structure under the intensive thermo cycling loading and neutron irradiation have been the object of consideration in particular. The works on the optimization and modification of industrial fabrication processes for commercial scaled production of beryllium tile were also under way. The influence of neutron irradiation. The new experimental data on the nuclear properties of several Russian beryllium grades has been obtained. The samples have been subjected to the high neutron dozes. The influence of low temperature (70-200degree C) neutron irradiation on the thermal conductivity has been examined in particular. The interrelations of the helium inventory and temperature of neutron irradiation with tritium release out of irradiated beryllium samples have been analyzed. The beryllium associated safety questions. The experiments on the modeling of normal working conditions and conditions imitating the plasma disruption events in ITER performance scenario have been continued. The new experimental information on the coefficient of pulverization of beryllium and the accumulation of deuterium in beryllium under the action of proton beam has been collected. The dependence of the reaction rate constant for the beryllium oxidation by the water vapor for different conditions has been analyzed. The compact, porous and powder beryllium samples have been tested at the wide range of temperature, pressure and duration of reaction with water vapor. The calculating

  17. Chemistry of 11-vertex rhodathiaboranes: reactions with monodentate phosphines

    OpenAIRE

    Calvo, Beatriz; Kess, M.; Macías, Ramón; Cunchillos, Carmen; Lahoz, Fernando J.; Kennedy, J. D.; Oro, Luis A.

    2011-01-01

    The reaction of [8,8-(PPh3)2-nido-8,7-RhSB 9H10] (1) with PR3 in a 1:2 ratio affords mixtures that contain the mono-substituted bis-PR3-ligated rhodathiaboranes [8,8-(PPh3)(L)-nido-8,7-RhSB9H 10] [L = PMe2Ph (5), PMe3 (6)] and the corresponding tris-PR3-ligated compounds [8,8,8-(L) 3-nido-8,7-RhSB9H10] [L = PMe2Ph (7), PMe3 (8)]. These latter species are more conveniently prepared from the reaction of 1 with three equivalents of the monodentate phosphines, PMe2Ph and PMe3. Reaction between 1 ...

  18. Beryllium nitride thin film grown by reactive laser ablation

    OpenAIRE

    G. Soto; Diaz, J.A.; Machorro, R.; Reyes-Serrato, A.; de la Cruz, W.

    2001-01-01

    Beryllium nitride thin films were grown on silicon substrates by laser ablating a beryllium foil in molecular nitrogen ambient. The composition and chemical state were determined with Auger (AES), X-Ray photoelectron (XPS) and energy loss (EELS) spectroscopies. A low absorption coefficient in the visible region, and an optical bandgap of 3.8 eV, determined by reflectance ellipsometry, were obtained for films grown at nitrogen pressures higher than 25 mTorr. The results show that the reaction ...

  19. Elastic scattering and fusion studies in the reactions $^{10,11}$Be + $^{64}$Zn

    CERN Multimedia

    2002-01-01

    We propose to measure elastic scattering and fusion excitation functions for the reactions $^{10,11}$Be + $^{64}$Zn at 3.1 MeV/u . The aim of the experiment is to investigate possible effects of the halo structure of the $^{11}$Be nucleus on the reaction mechanisms at energy around the Coulomb barrier. For this purpose a comparison with the reaction induced by the $^{10}$Be nucleus is required.

  20. 11. IAEA consultants' meeting of the nuclear reaction data centers. Obninsk, 7-11 October 1991

    International Nuclear Information System (INIS)

    This report summarizes the 1991 co-ordination meeting in Obninsk, Russia, of the national and regional nuclear reaction data centers, convened by the IAEA at regular intervals. The main topics are: the international exchange of nuclear reaction data by means of the ''EXFOR'' system, and the further development of this system; the ''CINDA'' system as an international index and bibliography to neutron reaction data; the sharing of the workload for speedy and reliable nuclear data compilation; the exchanged and documentation of evaluated data libraries in ENDF format, with the goal of rendering data center services to data users in IAEA Member States by means of computer retrievals, online services and printed materials

  1. Study of the nuclear reaction relevant to primordial nucleosynthesis: 8Li (α,n)11B

    International Nuclear Information System (INIS)

    A critical reaction in predicting abundances of 11B and heavier nuclides in the inhomogeneous models (IMs) is 8Li(α,n)11B, as 11B is the nuclide through which most heavier nuclides must pass, and that reaction apparently regulates the dominant pathway by which 11B is made in the IMs. The obvious complication in observing this reaction is the 840.3 ms half life of 8Li. A recent measurement of the inverse reaction 11B(n,α)8Li gives the ground state-ground state cross section for 8Li(α,n)11B. However, several 11B excited to be populated in 8Li(α,n)11B, so inference of the cross section of interest from measurement of the inverse reaction may underestimate the actual value by a large factor. Thus we have measured the cross section for 8Li(α,n)11B directly, using an 8Li radioactive beam and a novel detection technique. The results of that experiment are reported here. 23 refs., 4 figs

  2. The natural history of beryllium sensitization and chronic beryllium disease.

    OpenAIRE

    Newman, L. S.; Lloyd, J.; Daniloff, E.

    1996-01-01

    With the advent of in vitro immunologic testing, we can now detect exposed individuals who are sensitized to beryllium and those who have chronic beryllium disease (CBD) with lung pathology and impairment. Earlier detection and more accurate diagnostic tools raise new questions about the natural history of sensitization and granulomatous disease. Preliminary data suggest that early detection identifies people who are sensitized to beryllium and that these individuals are at risk for progressi...

  3. Reprocessing technology development for irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H.; Sakamoto, N. [Oarai Research Establishment, Ibaraki-ken (Japan); Tatenuma, K. [KAKEN Co., Ibaraki-ken (Japan)] [and others

    1995-09-01

    At present, beryllium is under consideration as a main candidate material for neutron multiplier and plasma facing material in a fusion reactor. Therefore, it is necessary to develop the beryllium reprocessing technology for effective resource use. And, we have proposed reprocessing technology development on irradiated beryllium used in a fusion reactor. The preliminary reprocessing tests were performed using un-irradiated and irradiated beryllium. At first, we performed beryllium separation tests using un-irradiated beryllium specimens. Un-irradiated beryllium with beryllium oxide which is a main impurity and some other impurities were heat-treated under chlorine gas flow diluted with Ar gas. As the results high purity beryllium chloride was obtained in high yield. And it appeared that beryllium oxide and some other impurities were removed as the unreactive matter, and the other chloride impurities were separated by the difference of sublimation temperature on beryllium chloride. Next, we performed some kinds of beryllium purification tests from beryllium chloride. And, metallic beryllium could be recovered from beryllium chloride by the reduction with dry process. In addition, as the results of separation and purification tests using irradiated beryllium specimens, it appeared that separation efficiency of Co-60 from beryllium was above 96%. It is considered that about 4% Co-60 was carried from irradiated beryllium specimen in the form of cobalt chloride. And removal efficiency of tritium from irradiated beryllium was above 95%.

  4. Beryllium. Its minerals. Pt. 1

    International Nuclear Information System (INIS)

    With this work a series of reports begins, under the generic name 'Beryllium', related to several aspects of beryllium technology. The target is to update, with critical sense, current bibliographic material in order to be used in further applications. Some of the most important beryllium ores, the Argentine emplacement of their deposits and world occurrence are described. Argentine and world production, resources and reserves are indicated here as well. (Author)

  5. Elastic scattering and reaction mechanisms of the halo nucleus $^{11}$Be around the Coulomb barrier

    CERN Document Server

    Di Pietro, A; Fisichella, M; Borge, M J G; Randisi, G; Milin, M; Figuera, P; Gomez-Camacho, J; Raabe, R; Amorini, F; Fraile, L M; Rizzo, F; Zadro, M; Torresi, D; Wenander, F; Pellegriti, M G; Papa, M; Jeppesen, H; Santonocito, D; Scuderi, V; Acosta, L; Perez-Bernal, F; Tengblad, O; Lattuada, M; Musumarra, A; Scalia, G; Maira Vidal, A; Voulot, D

    2010-01-01

    Collisions induced by $^{9}$Be, $^{10}$Be, $^{11}$Be on a $^{64}$Zn target at the same c. m. energy were studied. For the first time, strong effects of the $^{11}$Be halo structure on elastic-scattering and reaction mechanisms at energies near the Coulomb barrier are evidenced experimentally. The elastic-scattering cross section of the $^{11}$Be halo nucleus shows unusual behavior in the Coulomb-nuclear interference peak angular region. The extracted total-reaction cross section for the $^{11}$Be collision is more than double the ones measured in the collisions induced by $^{9}$Be, $^{10}$Be. It is shown that such a strong enhancement of the total-reaction cross section with $^{11}$Be is due to transfer and breakup processes.

  6. Spectrum of neutrons emitted from a thick beryllium target bombarded with 7 MeV deuterons

    International Nuclear Information System (INIS)

    The spectrum of neutrons emitted from a thick beryllium target bombarded with 7 MeV deuterons is measured at 25 reaction angles distributed between 00 and 1580, and over the neutron energy range ≅11.0 MeV. The spectrum is determined relative to the standard 252Cf prompt-fission-neutron-spectrum using fast time-of-flight techniques. The results are presented as angle-energy differential distributions and as relative numerical group cross sections suitable for establishing a reference field for applied studies. 24 refs., 4 figs

  7. Joining of Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, A

    2006-02-01

    A handbook dealing with the many aspects of beryllium that would be important for the users of this metal is currently being prepared. With an introduction on the applications, advantages and limitations in the use of this metal the following topics will be discussed in this handbook: physical, thermal, and nuclear properties; extraction from the ores; purification and casting of ingots; production and types of beryllium powders; consolidation methods, grades, and properties; mechanical properties with emphasis on the various factors affecting these properties; forming and mechanical working; welding, brazing, bonding, and fastening; machining; powder deposition; corrosion; health aspects; and examples of production of components. This report consists of ''Section X--Joining'' from the handbook. The prefix X is maintained here for the figures, tables and references. In this section the different methods used for joining beryllium and the advantages, disadvantages and limitations of each are presented. The methods discussed are fusion welding, brazing, solid state bonding (diffusion bonding and deformation bonding), soldering, and mechanical fastening. Since beryllium has a high affinity for oxygen and nitrogen with the formation of oxides and nitrides, considerable care must be taken on heating the metal, to protect it from the ambient atmosphere. In addition, mating surfaces must be cleaned and joints must be designed to minimize residual stresses as well as locations for stress concentration (notch effects). In joining any two metals the danger exists of having galvanic corrosion if the part is subjected to moisture or to any type of corroding environment. This becomes a problem if the less noble (anodic) metal has a significantly smaller area than the more noble (cathodic) metal since the ions (positive charges) from the anodic (corroding) metal must correspond to the number of electrons (negative charges) involved at the cathode. Beryllium

  8. Beryllium. Beryllium oxide, obtention and properties. Pt.4

    International Nuclear Information System (INIS)

    As a continuation of the 'Beryllium' series this work reviews several methods of high purity beryllia production. Diverse methods of obtention and purification from different beryllium compounds are described. Some chemical, mechanical and electrical properties related with beryllia obtention methods are summarized. (Author)

  9. Structure of the excited states of 11Be reached through the reaction d(10Be,p)11Be

    International Nuclear Information System (INIS)

    The one-neutron transfer reaction d(10Be,p)11Be has been studied at 32 A.MeV at GANIL with a 10Be secondary beam. Protons were detected by the silicon strip array MUST. The ground state and excited states of 11Be at 0.32, 1.78 and 3.41 MeV were populated, demonstrating the feasibility of transfer reactions induced by radioactive beams leading to bound and unbound states. A DWBA (distorted wave born approximation) analysis indicates for the 3.41 MeV state spin and parity 3/2+ or 5/2+ and a spectroscopic factor of 0.18 or 0.11, respectively. A broad structure centered at 10 MeV is also observed and corresponds to transfer to the 1d sub-shells. If one assumes that only the 1d3/2 orbital contributes to this structure, the splitting of the 1d neutron states in 11Be is estimated to be 6.3 MeV. Using a 2-particle-RPA (random phase approximation) model, we have shown that neutron-neutron correlations play an important role in the inversion between the 2s1/2 and 1p1/2 neutron states in 11Be. (author)

  10. Plasma spraying of beryllium and beryllium-aluminum-silver alloys

    International Nuclear Information System (INIS)

    A preliminary investigation on plasma-spraying of beryllium and a beryllium-aluminum 4% silver alloy was done at the Los Alamos National Laboratory's Beryllium Atomization and Thermal Spray Facility (BATSF). Spherical Be and Be-Al-4%Ag powders, which were produced by centrifugal atomization, were used as feedstock material for plasma-spraying. The spherical morphology of the powders allowed for better feeding of fine (<38 μm) powders into the plasma-spray torch. The difference in the as-deposited densities and deposit efficiencies of the two plasma-sprayed powders will be discussed along with the effect of processing parameters on the as-deposited microstructure of the Be-Al-4%Ag. This investigation represents ongoing research to develop and characterize plasma-spraying of beryllium and beryllium-aluminum alloys for magnetic fusion and aerospace applications

  11. A study of {sup 11} Be an {sup 11} Li halo nuclei by core breakup reactions; Etude des noyaux a halo de {sup 11} Be et {sup 11} Li par reactions de cassure du coeur

    Energy Technology Data Exchange (ETDEWEB)

    Grevy, S. [Institut de Physique Nucleaire, CNRS - IN2P3 Universite Paris Sud, 91406 Orsay Cedex (France)

    1997-12-31

    The study of light nuclei with large neutron excess are very useful for the understanding of nuclear matter far from stability. The nuclear halo phenomenon has been observed for the first time for Z < 10 nuclei in 80`s: halo nuclei consist of a `stable` core (neutron separation energy of about a few MeV) and one or two neutrons with a very low separation energy of about a few hundred keV. Their wave functions can extent from the core at distances larger than the main range of nuclear force. These halo nuclei have been studied by dissociation reactions in which the neutron from the halo is detected in coincidence with the core. It has been shown that the extraction of the halo wave function is strongly influenced by (i) the reaction mechanism itself (ii) final state interactions. In the present work core breakup reactions are used in which the halo neutron is detected in anticoincidence with the core to study the {sup 11} Be and {sup 11} Li halo nuclei. In this channel, the neutron is supposed not to participate to the reaction and then, when detected, to carry out the same properties as in the halo nucleus. The deduced widths of the neutron momentum distributions are different from the one extracted from the core distributions and with the more recent theoretical models. From these studies, it is also stressed that the properties of the core are essential to understand the halo phenomenon. In particular, the correlation between the core vibrations and the halo neutron are able to explain the emergence of the halo in {sup 11} Be. (author). 78 refs.

  12. Technical Basis for PNNL Beryllium Inventory

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Michelle Lynn

    2014-07-09

    The Department of Energy (DOE) issued Title 10 of the Code of Federal Regulations Part 850, “Chronic Beryllium Disease Prevention Program” (the Beryllium Rule) in 1999 and required full compliance by no later than January 7, 2002. The Beryllium Rule requires the development of a baseline beryllium inventory of the locations of beryllium operations and other locations of potential beryllium contamination at DOE facilities. The baseline beryllium inventory is also required to identify workers exposed or potentially exposed to beryllium at those locations. Prior to DOE issuing 10 CFR 850, Pacific Northwest Nuclear Laboratory (PNNL) had documented the beryllium characterization and worker exposure potential for multiple facilities in compliance with DOE’s 1997 Notice 440.1, “Interim Chronic Beryllium Disease.” After DOE’s issuance of 10 CFR 850, PNNL developed an implementation plan to be compliant by 2002. In 2014, an internal self-assessment (ITS #E-00748) of PNNL’s Chronic Beryllium Disease Prevention Program (CBDPP) identified several deficiencies. One deficiency is that the technical basis for establishing the baseline beryllium inventory when the Beryllium Rule was implemented was either not documented or not retrievable. In addition, the beryllium inventory itself had not been adequately documented and maintained since PNNL established its own CBDPP, separate from Hanford Site’s program. This document reconstructs PNNL’s baseline beryllium inventory as it would have existed when it achieved compliance with the Beryllium Rule in 2001 and provides the technical basis for the baseline beryllium inventory.

  13. Beryllium coprecipitation with iron hydroxide

    International Nuclear Information System (INIS)

    Coprecipitation and sorption are studied of beryllium with hydroxide of Fe(3) in solutions of NH4NO3, KNO3, NH4HCO3, and H2O2 over a wide range of pH of the medium. The conditions are found for concentrating and separating beryllium from the carrier within definite ranges of pH of the medium

  14. Thermal fatigue of beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Deksnis, E.; Ciric, D.; Falter, H. [JET Joint undertaking, Abingdon (United Kingdom)] [and others

    1995-09-01

    Thermal fatigue life of S65c beryllium castellated to a geometry 6 x 6 x (8-10)mm deep has been tested for steady heat fluxes of 3 MW/m{sup 2} to 5 MW/m{sup 2} and under pulsed heat fluxes (10-20 MW/m{sup 2}) for which the time averaged heat flux is 5 MW/m{sup 2}. These tests were carried out in the JET neutral beam test facility A test sequence with peak surface temperatures {le} 600{degrees}C produced no visible fatigue cracks. In the second series of tests, with T{sub max} {le} 750{degrees}C evidence for fatigue appeared after a minimum of 1350 stress cycles. These fatigue data are discussed in view of the observed lack of thermal fatigue in JET plasma operations with beryllium PFC. JET experience with S65b and S65c is reviewed; recent operations with {Phi} = 25 MW/m{sup 2} and sustained melting/resolidification are also presented. The need for a failure criterion for finite element analyses of Be PFC lifetimes is discussed.

  15. HEINBE; the calculation program for helium production in beryllium under neutron irradiation

    International Nuclear Information System (INIS)

    HEINBE is a program on personal computer for calculating helium production in beryllium under neutron irradiation. The program can also calculate the tritium production in beryllium. Considering many nuclear reactions and their multi-step reactions, helium and tritium productions in beryllium materials irradiated at fusion reactor or fission reactor may be calculated with high accuracy. The calculation method, user's manual, calculated examples and comparison with experimental data were described. This report also describes a neutronics simulation method to generate additional data on swelling of beryllium, 3,000-15,000 appm helium range, for end-of-life of the proposed design for fusion blanket of the ITER. The calculation results indicate that helium production for beryllium sample doped lithium by 50 days irradiation in the fission reactor, such as the JMTR, could be achieved to 2,000-8,000 appm. (author)

  16. Estimation on tritium production and inventory in beryllium

    International Nuclear Information System (INIS)

    Beryllium has been proposed as a candidate material for neutron multiplier on fusion blanket design, tritium will be produced and accumulated in beryllium during neutron irradiation. It is very important to estimate the tritium inventory on blanket design. Tritium production and inventory under 3.0 GW fusion power were calculated for the layered pebble bed blanket, with Li2O breeder and beryllium multiplier. Neutronics calculations were carried out by one-dimensional transport code, ANISN and tritium production was calculated by direct reaction of 9Be(n,T)7Li and two-step reactions of 9Be(n,α)6Li(n,α)T. At the position near first wall, the direct reaction occupied the majority of tritium production. However, at the position of the mid-depth, contribution of the two-step reaction was included the production from neutron slow down by beryllium itself. The ratio accounting for 50% of total tritium production of two-step reaction production over whole blanket for one year full power operation (FPY) was resulted

  17. Coulomb dissociation and momentum distributions for 11Li → 9Li + n + n breakup reactions

    International Nuclear Information System (INIS)

    Momentum distributions for the 11Li → 9Li+n+n breakup reaction, generated by Coulomb dipole excitations, axe calculated in a 3-body model for 11Li. The relative momentum distribution of the two neutrons is in good agreement with recent 3-body coincidence measurements but the momentum distribution for the 9Li recoil and the decay energy spectrum are much narrower than observed. These discrepancies may be due to higher order dynamical effects which have been ignored

  18. Contribution to the study of the evolution of radiation induced He in Be O; Etudes sur l'evolution de l'helium produit par reactions nucleaires dans l'oxyde de beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Bareau, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-11-15

    The purpose of this work in-pile investigation of He formed by (n, 2n) and (n, {alpha}) nuclear reactions, released from irradiated BeO, in the temperature range 1000 - 1350 deg. C. The experimental results show that, for an instantaneous neutron fast flux of 10{sup 13} n cm{sup -2} sec{sup -1}, an equilibrium is attempted, after several days, for a part lower than 20 per cent of the quantity of He formed, theoretically calculated from the neutron cross sections of nuclear reactions, and from the analytical form of the neutron fast flux, releases from the solid. The validity of the values of calculated helium and the gas chromatographic analytical method are also verified by dissolution of the BeO pellets in cryolite. A new fast neutron flux measuring method may be so defined. The discussion of the experimental results enables to establish that the processus of He release is characterized by two phenomena: the first one which controls the release of He atoms out of the solid and the second which reveals a capture processus, connected to the irradiation and probably due to the vacancies induced in the lattice. (author) [French] On etudie en pile le degagement de l'helium forme par reactions nucleaires (n, 2 n) et (n, {alpha}) dans l'oxyde de beryllium irradie entre 1000 et 1350 deg. C. Les resultats experimentaux montrant que, pour un flux rapide instantane de 10{sup 13} n{sub r} cm{sup -2} s{sup -1}, on aboutit, au bout de quelques jours, a un etat d'equilibre pour lequel une partie, inferieure a 20 pour cent de la quantite d'helium forme, calculee theoriquement a partir des sections efficaces des reactions nucleaires et de la forme analytique du flux rapide, s'echappe du solide. On verifie egalement par dissolution des echantillons de BeO dans la cryolithe la validite du calcul de l'helium et de la methode de dosage par chromatographie en phase gazeuse. On peut ainsi definir une methode nouvelle de mesure des flux rapides. La

  19. New results on the Trojan Horse Method applied to the B-10,B-11+p reactions

    Czech Academy of Sciences Publication Activity Database

    Spitaleri, C.; Romano, S.; Lamia, L.; Puglia, S. M. R.; Del Szanto, M. G.; Carlin, N.; Munhoz, M. G.; Kroha, Václav; Kubono, S.; Somoryai, E.; de Toledo, A. S.; Cherubini, S.; Crucilla, V.; Gulino, M.; Kiss, G.; La Cognata, M.; Li, C. B.; Liguori Neto, R.; De Moura, M.M.; Pizzone, R. G.; Rapisarda, G. G.; Sergi, M. L.; Souza, F. A .; Suaide, A. A. P.; Szanto, E.; Tabacaru, G.; Tudisco, S.; Tumino, A.; Wakabayashi, Y.; Wen, Q. G.; Yumaguchi, H.

    MELVILLE: AMER INST PHYSICS, 2009 - (Jeong, S.; Miyatake, H.; Utsano, Y.; Ikezoe, H.; Motobayashi, T.; Bracco, A.), s. 171-176. (AIP Conference Proceedings. 1120). ISBN 978-0-7354-0655-1. ISSN 0094-243X. [6th Japan-Italy Symposium on Heavy-Ion Physics. Tokai (JP), 11.11.2008-15.11.2008] R&D Projects: GA MŠk ME 902; GA MŠk LC07050 Institutional research plan: CEZ:AV0Z10480505 Keywords : Nuclear Astrophysics * Indirect Methods * Nuclear Reactions Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders

  20. Characterization of shocked beryllium

    International Nuclear Information System (INIS)

    Explosively driven arrested beryllium experiments were performed with post mortem characterization to evaluate the failure behaviors. The test samples were encapsulated in an aluminum assembly that was large relative to the sample, and the assembly features both axial and radial momentum traps. The sample carrier was inserted from the explosively-loaded end and has features to lock the carrier to the surrounding cylinder using the induced plastic flow. Calculations with Lagrangian codes showed that the tensile stresses experienced by the Be sample were below the spall stress. Metallographic characterization of the arrested Be showed radial cracks present in the samples may have been caused by bending moments. Fractography showed the fractures propagated from the side of the sample closest to the explosives, the side with the highest tensile stress. There was evidence that the fractures may have propagated from the circumferential crack outward and downward radially.

  1. Angular distributions of four neutron groups from the 10B(d, n)11C reaction

    NARCIS (Netherlands)

    Paris, C.H.; Endt, P.M.

    1954-01-01

    Measurements are described of the angular distributions of the four most energetic neutron groups from the 10B(d, n)11C reaction at a deuteron energy of 0.6 MeV. Neutrons were detected by their recoil protons in nuclear emulsions. The angular distributions have been analyzed in terms of a stripping

  2. Stripping reactions of neutron rich 11Be and 19C nuclei

    International Nuclear Information System (INIS)

    In recent times, the stripping reactions measuring the longitudinal momentum distribution and absorption cross section have been used as a prolific tool to investigate the ground state properties of neutron rich nuclei. The nuclei 11Be and 19C, being paradigm for single neutron halo, have attracted a significant interest, both theoretically as well as experimentally

  3. Investigation of activation behind a beryllium slab under irradiation with 14 MeV neutrons

    International Nuclear Information System (INIS)

    Some concepts of a thermonuclear blanket include a neutron multiplier whose purpose is to breed tritium. The best neutron-multiplier is beryllium because the cross section (550 mb) of the (n,2n) reaction is large and the threshold energy (2.7 MeV) is low. The accuracy of the prediction of the tritium ratio depends strongly on the uncertainty of its (n,2n) reaction cross section. It is thus extremely important to check the consistency of the estimated data for beryllium, which are employed in theoretical investigations. The experimental results for beryllium assemblies disagree with the computational data. This makes it necessary to perform new experiments

  4. Transition metal mediated [(11) C]carbonylation reactions: recent advances and applications.

    Science.gov (United States)

    Kealey, Steven; Gee, Antony; Miller, Philip W

    2014-04-01

    [(11) C]Carbon monoxide is undoubtedly a highly versatile radiolabelling synthon with many potential applications for the synthesis of positron emission tomography (PET) tracer molecules and functional groups, but why has it not found more applications in the PET radiolabelling arena? Today, (11) CO radiolabelling is still primarily viewed as a niche area; however, there are signs that this is beginning to change as some of the technical and chemistry challenges of producing, handling and reacting (11) CO are overcome. This mini review covers the more recent developments of (11) CO-labelling chemistry and is focused on palladium and rhodium-mediated carbonylation reactions that are growing in importance and finding wider application for carbon-11 PET radiotracer development. PMID:24425679

  5. Study of reactions induced by the halo nucleus 11Li with the active target MAYA

    International Nuclear Information System (INIS)

    Active targets are perfect tools for the study of nuclear reactions induced by very low intensity radioactive ion beams. They also enable the simultaneous study of direct and compound nuclear reactions. The active target MAYA, built at GANIL, has been used to study the reactions induced by a 4.3*A MeV 11Li beam at the ISAC2 accelerator TRIUMF (Canada). The angular distributions for the elastic scattering and the one and two neutron transfer reaction have been reconstructed. The elastic scattering angular distribution indicates a strong enhancement of the flux absorption with respect to the neighbouring nuclei. From a coupled channel analysis of the two neutron transfer reaction for different three body models, the information on the structure of the halo of the Borromean nucleus 11Li have been extracted. Meanwhile, the energy dependence of the elastic scattering reaction has been studied, using the active target MAYA as a thick target. The resulting spectrum shows a resonance around 3 MeV centre of mass. This resonance could be an isobaric analog state of 12Li, observed in 12Be. R matrix calculations have been performed in order to extract the parameters (spin and parity) of this state. (author)

  6. Biogeochemistry of beryllium in a forested catchment, Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Tomáš; Skřivan, Petr; Vach, Marek; Filippi, Michal

    Edinburg : University of Edinburg, 2003. s. 94. [International Symposium on Environmental Geochemistry.. 07.09.2003-11.09.2003, Edinburg] R&D Projects: GA AV ČR IAB3013203 Institutional research plan: CEZ:AV0Z3013912 Keywords : biogeochemistry * experimental catchment * beryllium Subject RIV: DD - Geochemistry

  7. Beryllium technology workshop, Clearwater Beach, Florida, November 20, 1991

    International Nuclear Information System (INIS)

    This report discusses the following topics: beryllium in the ITER blanket; mechanical testing of irradiated beryllium; tritium release measurements on irradiated beryllium; beryllium needs for plasma-facing components; thermal conductivity of plasma sprayed beryllium; beryllium research at the INEL; Japanese beryllium research activities for in-pile mockup tests on ITER; a study of beryllium bonding of copper alloy; new production technologies; thermophysical properties of a new ingot metallurgy beryllium product line; implications of beryllium:steam interactions in fusion reactors; and a test program for irradiation embrittlement of beryllium at JET

  8. Ab Initio Simulation Beryllium in Solid Molecular Hydrogen: Elastic Constant

    Science.gov (United States)

    Guerrero, Carlo L.; Perlado, Jose M.

    2016-03-01

    In systems of inertial confinement fusion targets Deuterium-Tritium are manufactured with a solid layer, it must have specific properties to increase the efficiency of ignition. Currently there have been some proposals to model the phases of hydrogen isotopes and hence their high pressure, but these works do not allow explaining some of the structures present at the solid phase change effect of increased pressure. By means of simulation with first principles methods and Quantum Molecular Dynamics, we compare the structural difference of solid molecular hydrogen pure and solid molecular hydrogen with beryllium, watching beryllium inclusion in solid hydrogen matrix, we obtain several differences in mechanical properties, in particular elastic constants. For C11 the difference between hydrogen and hydrogen with beryllium is 37.56%. This may produce a non-uniform initial compression and decreased efficiency of ignition.

  9. Angular Distribution of the 12C(6He, 7Li)11B Reaction

    Institute of Scientific and Technical Information of China (English)

    LI Er-Tao; LI Zhi-Hong; LI Yun-Ju; YAN Sheng-Quan; BAI Xi-Xiang; GUO Bing; SU Jun; WANG You-Bao; WANG Bao-Xiang; LIAN Gang; ZENG Sheng; FANG Xiao; ZHAO Wei-Juan; LIU Wei-Ping

    2009-01-01

    Angular distribution of the 12C(6He, 7Li)11B transfer reaction is measured with a secondary 6He beam of 36.4 Me V for the first time. The experimental angular distribution is well reproduced by the distorted-wave Born approxima-tion (DWBA) calculation. The success of the present experiment shows that it is feasible to measure one-nucleon transfer reaction on a light nucleus target with the secondary beam facility of the HI-13 tandem accelerator at China Institute of Atomic Energy (CIAE), Beifing.

  10. Analysis of the KANT experiment on beryllium using TRIPOLI-4 Monte Carlo code

    International Nuclear Information System (INIS)

    Beryllium is an important material in fusion technology for multiplying neutrons in blankets. However, beryllium nuclear data are differently presented in modern nuclear data evaluations. Recent investigations with the TRIPOLI-4 Monte Carlo simulation of the tritium breeding ratio (TBR) demonstrated that beryllium reaction data are the main source of the calculation uncertainties between ENDF/B-VII.0 and JEFF-3.1. To clarify the calculation uncertainties from data libraries on beryllium, in this study TRIPOLI-4 calculations of the Karlsruhe Neutron Transmission (KANT) experiment have been performed by using ENDF/B-VII.0 and new JEFF-3.1.1 data libraries. The KANT Experiment on beryllium has been used to validate neutron transport codes and nuclear data libraries. An elaborated KANT experiment benchmark has been compiled and published in the NEA/SINBAD database and it has been used as reference in the present work. The neutron multiplication in bulk beryllium assemblies was considered with a central D-T neutron source. Neutron leakage spectra through the 5, 10, and 17 cm thick spherical beryllium shells were calculated and five-group partial leakage multiplications were reported and discussed. In general, improved C/E ratios on neutron leakage multiplications have been obtained. Both ENDF/B-VII.0 and JEFF-3.1.1 beryllium data libraries of TRIPOLI-4 are acceptable now for fusion neutronics calculations.

  11. Deformation behaviour of fine grained high purity beryllium - influence of fabrication parameters, temperature and copper additions

    International Nuclear Information System (INIS)

    The deformation behaviour of high-purity beryllium was tested on hot isostatically pressed samples of different initial grain size and compared with material manufactured commercially from pure beryllium and with beryllium-copper alloys containing 0.44, 1.1 and 2.1 at.% copper. Initial grain size of these high purity material was 0C. Grain structure of the samples was subsequently analysed by light, rastor and transmission electron microscopy. The influence of copper additions on deformation of high-purity beryllium was analysed. A further aim of this study was to investigate, by suitable methods, the mode of action of relevant impurities and to throw light on their influence on grain formation. This should enable reliable information to be provided for the manufacture of high-purity beryllium which, in turn, will lead to an improvement in ductility. (orig./IHOE)

  12. The mechanism of the reaction B10 (d,p) B11 at low deuteron energies

    International Nuclear Information System (INIS)

    Excitation functions and angular distributions were measured for the four most energetic proton groups from the reaction B10 (d,p) B11 in the deuteron energy range Ed = 0.8 to 2.4 MeV. The excitation functions for all the measured groups showed no noticeable resonance structure. Spectroscopic factors for the states at 0.00 and 4.46 MeV of B11 were extracted from a DWBA analysis of the angular distributions. The average values of the spectroscopic factors were compared with those predicted theoretically. (orig.)

  13. Exclusive and restricted inclusive reactions involving the 11Be one-neutron halo

    International Nuclear Information System (INIS)

    Reactions of a 41 MeV/u beam of the radioactive halo nucleus 11Be have been studied with a counter telescope coupled to an array of neutron detectors. The technique allows to determine single-neutron inclusive and exclusive angular distributions. The targets (Be, Ti and Au) were chosen to illustrate the relative roles played by nuclear and Coulomb mechanisms. It is shown that for the dissociation process it is possible to account almost quantitatively for the integral, single- and double-differential cross-sections from models without free parameters including the Coulomb, Serber and Glauber (diffraction dissociation) mechanisms. (K.A.). 56 refs., 11 figs., 1 tab

  14. Erosion of beryllium under ITER – Relevant transient plasma loads

    Energy Technology Data Exchange (ETDEWEB)

    Kupriyanov, I.B., E-mail: igkupr@gmail.com [A.A. Bochvar High Technology Research Institute of Inorganic Materials, Rogova St. 5a, 123060 Moscow (Russian Federation); Nikolaev, G.N.; Kurbatova, L.A.; Porezanov, N.P. [A.A. Bochvar High Technology Research Institute of Inorganic Materials, Rogova St. 5a, 123060 Moscow (Russian Federation); Podkovyrov, V.L.; Muzichenko, A.D.; Zhitlukhin, A.M. [TRINITI, Troitsk, Moscow reg. (Russian Federation); Gervash, A.A. [Efremov Research Institute, S-Peterburg (Russian Federation); Safronov, V.M. [Project Center of ITER, Moscow (Russian Federation)

    2015-08-15

    Highlights: • We study the erosion, mass loss/gain and surface structure evolution of Be/CuCrZr mock-ups, armored with beryllium of TGP-56FW grade after irradiation by deuterium plasma heat load of 0.5 MJ/m{sup 2} at 250 °C and 500 °C. • Beryllium mass loss/erosion under plasma heat load at 250 °C is rather small (no more than 0.2 g/m{sup 2} shot and 0.11 μm/shot, correspondingly, after 40 shots) and tends to decrease with increasing number of shots. • Beryllium mass loss/erosion under plasma heat load at 500 °C is much higher (∼2.3 g/m{sup 2} shot and 1.2 μm/shot, correspondingly, after 10 shot) and tends to decrease with increasing the number of shots (∼0.26 g/m{sup 2} pulse and 0.14 μm/shot, correspondingly, after 100 shot). • Beryllium erosion value derived from the measurements of profile of irradiated surface is much higher than erosion value derived from mass loss data. - Abstract: Beryllium will be used as a armor material for the ITER first wall. It is expected that erosion of beryllium under transient plasma loads such as the edge-localized modes (ELMs) and disruptions will mainly determine a lifetime of the ITER first wall. This paper presents the results of recent experiments with the Russian beryllium of TGP-56FW ITER grade on QSPA-Be plasma gun facility. The Be/CuCrZr mock-ups were exposed to up to 100 shots by deuterium plasma streams (5 cm in diameter) with pulse duration of 0.5 ms and heat loads range of 0.2–0.5 MJ/m{sup 2} at different temperature of beryllium tiles. The temperature of Be tiles has been maintained about 250 and 500 °C during the experiments. After 10, 40 and 100 shots, the beryllium mass loss/gain under erosion process were investigated as well as evolution of surface microstructure and cracks morphology.

  15. Structure of states in 12Be via the 11Be(d,p) reaction

    International Nuclear Information System (INIS)

    The s-wave neutron fraction of the 0+ levels in 12Be has been investigated for the first time through the 11Be(d,p) transfer reaction using a 5A MeV11Be beam at TRIUMF, Canada. The reaction populated all the known bound states of 12Be. The ground state s-wave spectroscopic factor was determined to be 0.28-0.07+0.03 while that for the long-lived 02+ excited state was 0.73-0.40+0.27. This observation, together with the smaller effective separation energy indicates enhanced probability for an extended density tail beyond the 10Be core for the 02+ excited state compared to the ground state.

  16. On the possibility of photometric determination of beryllium in the presence of aluminium by chromazurol S in aqua-organic media

    International Nuclear Information System (INIS)

    The possibility is shown to improve the selectivity of photometric determination of beryllium in the presence of aluminium using the reaction with Chromazurol S (CAS) in organo-aqueous solution and 8-hydroxyquinoline as masking agent. A mixture, containing propanol, 2-3 vol.% H2O and 1-2 vol.% acetic acid, is an optimal medium for the reaction betWeen beryllium and CAS. Determination of 0.45 μg of beryllium in the presence of 2000-fold amounts of aluminiUm is possible. Some other elements (mass excess is bracketed): nickel (7800) indium (2500), zink (700) do not hinder the reaction between beryllium and CAS

  17. Processing Irradiated Beryllium For Disposal

    Energy Technology Data Exchange (ETDEWEB)

    T. J. Tranter; R. D. Tillotson; N. R. Mann; G. R. Longhurst

    2005-11-01

    The purpose of this research was to develop a process for decontaminating irradiated beryllium that will allow it to be disposed of through normal radwaste channels. Thus, the primary objectives of this ongoing study are to remove the transuranic (TRU) isotopes to less than 100 nCi/g and remove {sup 60}Co, and {sup 137}Cs, to levels that will allow the beryllium to be contact handled. One possible approach that appears to have the most promise is aqueous dissolution and separation of the isotopes by selected solvent extraction followed by precipitation, resulting in a granular form for the beryllium that may be fixed to prevent it from becoming respirable and therefore hazardous. Beryllium metal was dissolved in nitric and fluorboric acids. Isotopes of {sup 241}Am, {sup 239}Pu, {sup 85}Sr, and {sup 137}Cs were then added to make a surrogate beryllium waste solution. A series of batch contacts was performed with the spiked simulant using chlorinated cobalt dicarbollide (CCD) and polyethylene glycol diluted with sulfone to extract the isotopes of Cs and Sr. Another series of batch contacts was performed using a combination of octyl (phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) in tributyl phosphate (TBP) diluted with dodecane for extracting the isotopes of Pu and Am. The results indicate that greater than 99.9% removal can be achieved for each isotope with only three contact stages.

  18. Isotopic Transmutations in Irradiated Beryllium and Their Implications on MARIA Reactor Operation

    International Nuclear Information System (INIS)

    Beryllium irradiated by neutrons with energies above 0.7 MeV undergoes (n,α) and (n,2n) reactions. The Be(n,α) reaction results in subsequent buildup of 6Li and 3He isotopes with large thermal neutron absorption cross sections causing poisoning of irradiated beryllium. The amount of the poison isotopes depends on the neutron flux level and spectrum. The high-flux MARIA reactor operated in Poland since 1975 consists of a beryllium matrix with fuel channels in cutouts of beryllium blocks. As the experimental determination of 6Li, 3H, and 3He content in the operational reactor is impossible, a systematic computational study of the effect of 3He and 6Li presence in beryllium blocks on MARIA reactor reactivity and power density distribution has been undertaken. The analysis of equations governing the transmutation has been done for neutron flux parameters typical for MARIA beryllium blocks. Study of the mutual influence of reactor operational parameters and the buildup of 6Li, 3H, and 3He in beryllium blocks has shown the necessity of a detailed spatial solution of transmutation equations in the reactor, taking into account the whole history of its operation. Therefore, fuel management calculations using the REBUS code with included chains for Be(n,α)-initiated reactions have been done for the whole reactor lifetime. The calculated poisoning of beryllium blocks has been verified against the critical experiment of 1993. Finally, the current 6Li, 3H, and 3He contents, averaged for each beryllium block, have been calculated. The reactivity drop caused by this poisoning is ∼7%

  19. Status of beryllium materials for fusion application

    International Nuclear Information System (INIS)

    The possible use of beryllium as a material for fusion reactors is discussed. Based on the results of recent Russian elaborations, which were not covered previously in the scientific literature, an attempt of complex analysis of the techniques of using beryllium is made. The specific requirements on beryllium as a protective material for first wall and divertor are considered. Also the possibility of creating a fusion grade of beryllium is discussed and an optimum strategy is suggested. (orig.)

  20. Compatibility test between beryllium and ferritic stainless steel(F82H)

    International Nuclear Information System (INIS)

    In a fusion blanket, beryllium has been identified for use as neutron multiplier, where it will be in contact with the structural material. Austenitic stainless steel, 316SS has been considered as the structural material. However, from some studies, it is reported that beryllium reacts with 316SS above 600 C. In our investigations, we found that the reaction product between beryllium and nickel, BeNi was formed on 316SS side at 600 C. Therefore, the compatibility between beryllium and ferritic stainless steel without nickel, F82H(Fe - 8%Cr - 2%W - 0.2%V) as the new structural material in JAERI was investigated to determine if it was more compatible with beryllium. In this study, for clarifying the chemical interaction between beryllium and F82H, the out-of-pile compatibility test has been carried out with diffusion couples of beryllium and F82H which were inserted in the capsule filled with high purity helium gas. Annealing temperatures was 400, 600 and 800 C, and annealing periods was 100, 300 and 1000 h, respectively. From the results of this test, it is obvious that the thickness of reaction layer in F82H is 2/3 of that in 316SS in the case of annealing at 800 C for 1000 h. (orig.)

  1. One-neutron stripping reactions of 11Be and 19C on light target

    Indian Academy of Sciences (India)

    Rajesh Kharab; Ravinder Kumar; Pradeep Singh; H C Sharma

    2007-05-01

    We have calculated the one-neutron absorption cross-section and the longitudinal momentum distribution of the core fragment coming out from the breakup of 11Be and 19C on 9Be target at 63 MeV/A and 88 MeV/A beam energies respectively. The reaction mechanism is treated within the framework of the eikonal approximation. The effective range of the nuclear interaction between the core and the valence neutron within the projectile has been determined by comparing the predicted stripping crosssection with the recently measured one. The effective range for 19C has been found to besmaller than that for 11Be. It qualitatively indicates that 19C is slightly more halo than 11Be. The smaller width, predicted as well as measured, of the LMD of 18C than 10Be also strengthens this fact. The experimental data concerning the LMD of core fragments have been well represented.

  2. The new possibility of the fusion p + 11B chain reaction being induced by intense laser pulses

    Science.gov (United States)

    Belyaev, V. S.; Krainov, V. P.; Matafonov, A. P.; Zagreev, B. V.

    2015-09-01

    We discuss the experimental and theoretical principal schemes of a thermonuclear reactor, based on the fusion reaction p + 11B: beam collisions, fusion in degenerate plasmas, ignition at the plasma, particle acceleration by nonlinear ponderomotive forces and irradiation of the solid 11B target by a proton beam at the Coulomb explosion of hydrogen microdroplets. The fusion reaction p + 11B can be initiated by ultrashort high intensity laser pulses under conditions far from thermodynamic equilibrium. This may result in fusion products containing a small amount of neutrons and other nuclear radiation effects. It was found that the fusion reaction p + 11B produces further nuclear reactions and generates high-energy protons. The latter can support the chain reaction process. Our approach allows us to also investigate nuclear reactions in the early Universe and in stars.

  3. Spectrographic measurement of beryllium in the atmosphere

    International Nuclear Information System (INIS)

    We describe here a method for the spectrographic determination of beryllium on filters which is valid for amounts varying between 0,01 and 30 μg of beryllium and which is independent of the nature of the beryllium compound involved. This is a flux method (graphite-lithium carbonate mixture), the excitation being by a direct current arc. (author)

  4. Neutron irradiation of beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Gelles, D.S.; Ermi, R.M. [Pacific Northwest National Lab., Richland, WA (United States); Tsai, H. [Argonne National Lab., IL (United States)

    1998-03-01

    Seven subcapsules from the FFTF/MOTA 2B irradiation experiment containing 97 or 100% dense sintered beryllium cylindrical specimens in depleted lithium have been opened and the specimens retrieved for postirradiation examination. Irradiation conditions included 370 C to 1.6 {times} 10{sup 22} n/cm{sup 2}, 425 C to 4.8 {times} 10{sup 22} n/cm{sup 2}, and 550 C to 5.0 {times} 10{sup 22} n/cm{sup 2}. TEM specimens contained in these capsules were also retrieved, but many were broken. Density measurements of the cylindrical specimens showed as much as 1.59% swelling following irradiation at 500 C in 100% dense beryllium. Beryllium at 97% density generally gave slightly lower swelling values.

  5. Nuclear reactions with 11C and 14O radioactive ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Fanqing

    2004-12-09

    Radioactive ion beams (RIBs) have been shown to be a useful tool for studying proton-rich nuclides near and beyond the proton dripline and for evaluating nuclear models. To take full advantage of RIBs, Elastic Resonance Scattering in Inverse Kinematics with Thick Targets (ERSIKTT), has proven to be a reliable experimental tool for investigations of proton unbound nuclei. Following several years of effort, Berkeley Experiments with Accelerated Radioactive Species (BEARS), a RIBs capability, has been developed at the Lawrence Berkeley National Laboratory's 88-Inch Cyclotron. The current BEARS provides two RIBs: a 11C beam of up to 2x108 pps intensity on target and an 14O beam of up to 3x104 pps intensity. While the development of the 11C beam has been relatively easy, a number of challenges had to be overcome to obtain the 14O beam. The excellent 11C beam has been used to investigate several reactions. The first was the 197Au(11C,xn)208-xnAt reaction, which was used to measure excitation functions for the 4n to 8n exit channels. The measured cross sections were generally predicted quite well using the fusion-evaporation code HIVAP. Possible errors in the branching ratios of ?? decays from At isotopes as well as the presence of incomplete fusion reactions probably contribute to specific overpredictions. 15F has been investigated by the p(14O,p)14O reaction with the ERSIKTT technology. Several 14O+p runs have been performed. Excellent energy calibration was obtained using resonances from the p(14N,p)14N reaction in inverse kinematics, and comparing the results to those obtained earlier with normal kinematics. The differences between 14N+p and 14O+p in the stopping power function have been evaluated for better energy calibration. After careful calibration, the energy levels of 15F were fitted with an R-matrix calculation. Spins and parities were assigned to the two observed resonances. This new measurement of the 15F ground state supports the disappearance of the Z

  6. Nuclear reactions with 11C and 14O radioactive ion beams

    International Nuclear Information System (INIS)

    Radioactive ion beams (RIBs) have been shown to be a useful tool for studying proton-rich nuclides near and beyond the proton dripline and for evaluating nuclear models. To take full advantage of RIBs, Elastic Resonance Scattering in Inverse Kinematics with Thick Targets (ERSIKTT), has proven to be a reliable experimental tool for investigations of proton unbound nuclei. Following several years of effort, Berkeley Experiments with Accelerated Radioactive Species (BEARS), a RIBs capability, has been developed at the Lawrence Berkeley National Laboratory's 88-Inch Cyclotron. The current BEARS provides two RIBs: a 11C beam of up to 2x108 pps intensity on target and an 14O beam of up to 3x104 pps intensity. While the development of the 11C beam has been relatively easy, a number of challenges had to be overcome to obtain the 14O beam. The excellent 11C beam has been used to investigate several reactions. The first was the 197Au(11C,xn)208-xnAt reaction, which was used to measure excitation functions for the 4n to 8n exit channels. The measured cross sections were generally predicted quite well using the fusion-evaporation code HIVAP. Possible errors in the branching ratios of ?? decays from At isotopes as well as the presence of incomplete fusion reactions probably contribute to specific overpredictions. 15F has been investigated by the p(14O,p)14O reaction with the ERSIKTT technology. Several 14O+p runs have been performed. Excellent energy calibration was obtained using resonances from the p(14N,p)14N reaction in inverse kinematics, and comparing the results to those obtained earlier with normal kinematics. The differences between 14N+p and 14O+p in the stopping power function have been evaluated for better energy calibration. After careful calibration, the energy levels of 15F were fitted with an R-matrix calculation. Spins and parities were assigned to the two observed resonances. This new measurement of the 15F ground state supports the disappearance of the Z = 8

  7. Cryogenic Properties of Aluminum Beryllium and Beryllium Materials

    Science.gov (United States)

    Gamwell, Wayne R.; McGill, Preston B.

    2003-01-01

    Ultimate tensile strength, yield strength, and elongation were obtained for the aluminum-beryllium alloy, AlBeMetl62 (38%Al-62%Be), at cryogenic (-195.5 C (-320 F) and (-252.8 C) (-423 F)) temperatures, and for an optical grade beryllium, O-30H (99%Be), at -252.8 C. AlBeMetl62 material was purchased to the requirements of SAE-AMS7912, "Aluminum-Beryllium Alloy, Extrusions." O-30H material was purchased to the requirements of Brush Wellman Inc. specification O-30H Optical Grade Beryllium. The ultimate tensile and yield strengths for extruded AlBeMetl62 material increased with decreasing temperature, and the percent elongation decreased with decreasing temperature. Design properties for the ultimate tensile strength, yield strength, and percent elongation for extruded AlBeMetl62 were generated. It was not possible to distinguish a difference in the room and cryogenic ultimate strength for the hot isostatically pressed (HIP'ed) O-30H material. The O30H elongation decreased with decreasing temperature.

  8. Cryogenic Properties of Aluminum-Beryllium and Beryllium Materials

    Science.gov (United States)

    Gamwell, Wayne R.; McGill, Preston B.

    2003-01-01

    Ultimate tensile strength, yield strength, and elongation were obtained for the aluminum- beryllium alloy, AlBeMetl62 (38%Al-62%Be), at cryogenic (-195.5 C (-32O F) and (- 252.8 C) (-423 F)) temperatures, and for an optical grade beryllium, O-30H (99%Be), at -252.8 C. AlBeMet162 material was purchased to the requirements of SAE- AMs7912, "Aluminum-Beryllium Alloy, Extrusions". O-30H material was purchased to the requirements of Brush Wellman Inc. specification O-30H Optical Grade Beryllium. The ultimate tensile and yield strengths for extruded AlBeMet162 material increased with decreasing temperature, and the percent elongation decreased with decreasing temperature. Design properties for the ultimate tensile strength, yield strength, and percent elongation for extruded AlBeMetl62 were generated. It was not possible to distinguish a difference in the room and cryogenic ultimate strength for the hot isostatically pressed (HIP'ed) O-30H material. The O-30H elongation decreased with decreasing temperature.

  9. Tritium release of Li4SiO4, Li2O and beryllium and chemical compatibility of beryllium with Li4SiO4, Li2O and steel (SIBELIUS irradiation)

    International Nuclear Information System (INIS)

    The objective of the SIBELIUS irradiation, a joint EC-US project performed at CEN Grenoble, was to investigate the oxidation kinetics of beryllium in contact with ceramic and the nature and extent of beryllium in contact with ceramic and the nature and extent of beryllium interaction with (316 L and 1.4914) steel in a neutron environment. In this work post irradiation examinations of SIBELIUS specimens performed at KfK are described. Tritium release of Li4SiO4, Li2O and beryllium was studied by out-of-pile annealing and chemical compatibility of beryllium with Li4SiO4, Li2O and steel by microscopic examinations. Tritium release of the ceramics was found to be consistent with SIBELIUS inpile observations and previous tests. Release of tritium generated in beryllium was found to be very slow, in accordance with previous work. For beryllium which was in contact with ceramic during irradiation, a second type of tritium, caused by injection of 2.7 MeV tritons generated in the ceramic, is observed. Release of injected tritium is faster than that of generated. Evidence for injected tritium in beryllium was also found in the microscopic studies. The observed minor chemical reactions of beryllium with steel and probably also those with breeder materials under neutron irradiation are consistent with the results of laboratory annealing tests. (orig.)

  10. Device for continuous control of beryllium content in atmosphere and on surfaces

    International Nuclear Information System (INIS)

    As known, beryllium and its compounds are characterized by high toxicity, therefore it is necessary to control constantly the content of beryllium and its compounds in the air and also on the surfaces of production areas and equipment to provide safety. The device for a quick measuring of beryllium content in the air, surface deposits and precipitations is described in the report. The mode of functioning of the device is based on nuclear reaction 9Be(αnγ)12C with the use of alpha-source based on plutonium-238, i.e. beryllium can be in any chemical state - metal, oxide, salt, etc. Gamma-quantums with energies 7,65 MeV (10%) and 4,43 MeV (90%), typical for beryllium, are generated as a result of interaction between alpha-particles and beryllium nuclei. The mentioned reaction with beryllium gives maximum release if comparing with another nuclides and along with high energy of gamma-quantums provides maximum sensibility of analysis without any disturbance from another elements. The number of generated gamma-quantums is in proportion to beryllium content in a probe. The device consists of the probe-preparation unit, control unit and two-way communication line. The unit of probe extraction can be placed in different points of an area, at a large distance - up to 30 meters. This device is compact and easy to transport by one person. The device control can be realized by operator via the remote control unit or automatically by the given program. The time of the probe data processing is 10-15 min. The use of the device allows to carry out beryllium content measuring in the mode of current time. (author)

  11. Properties of carbon-based structures synthesized in nuclear reactions induced by bremsstrahlung γ quanta with threshold energy of 10 MeV at helium pressure of 1.1 kbar

    Science.gov (United States)

    Didyk, A. Yu.; Wiśniewski, R.

    2016-07-01

    Helium gas with an initial pressure of about 1.1 kbar inside a high-pressure chamber (HeHPC) has been irradiated by bremsstrahlung γ quanta with a threshold energy of 10 MeV for 1.0 × 105 s produced by an electron-beam current of 22-24 μA. After opening the HeHPC, the residual pressure of helium is equal to 430 bar. Synthesized black foils with a variety of other objects are found inside the HeHPC. They are located on the inner surfaces of the reaction chamber made of high-purity copper (99.99%), the entrance the window of γ quanta made of beryllium bronze and a copper container of nuclear and chemical reaction products. Elemental analysis with the use of scanning electron microscopy and X-ray microprobe analysis has revealed that the foils contain predominantly carbon and small quantities of other elements from carbon to iron. The results are in good agreement with the cycle of investigations of the authors devoted to the γ-quanta irradiation of dense hydrogen and helium gases in the presence (absence) of metals in a reaction chamber.

  12. Reactions with three outgoing particles in pion-proton collisions at 11 GeV/c

    International Nuclear Information System (INIS)

    Two samples of 200 000 pictures obtained in a hydrogen bubble chamber were used to study the following reactions π±p → pπ±π0 and π-p → nπ+π- at 11 GeV/c. The quasi two bodies channels π+p → π0Δ++ (1236), π-p → nρ0 (765) and π±p → pρ± (765) are examined. Using the results from different high energies experiments, the Regge pole model is compared to the data of the channel π+p → π0Δ++. (author)

  13. Worker Environment Beryllium Characterization Study

    International Nuclear Information System (INIS)

    This report summarizes the conclusion of regular monitoring of occupied buildings at the Nevada Test Site and North Las Vegas facility to determine the extent of beryllium (Be) contamination in accordance with Judgment of Needs 6 of the August 14, 2003, 'Minnema Report.'

  14. Worker Environment Beryllium Characterization Study

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environment, Safety, Health & Quality

    2009-12-28

    This report summarizes the conclusion of regular monitoring of occupied buildings at the Nevada Test Site and North Las Vegas facility to determine the extent of beryllium (Be) contamination in accordance with Judgment of Needs 6 of the August 14, 2003, “Minnema Report.”

  15. Complete kinematics study of the p + 11B → 12C reaction

    International Nuclear Information System (INIS)

    New data and preliminary results from an experimental study of the p + 11B reaction are presented. Using proton energies in the range of 167 – 170 keV the 2+ resonance in 12C at an excitation energy of 16.11 MeV was populated. Detecting the emitted a-particles in full kinematics allows us to study 12 C resonances and their properties. In addition to the 3-α break-up of the 16.11 MeV resonance we observe γ-transitions to lower lying resonances. Transitions to the 3− state at 9.64MeV, the 1− state at 10.84 MeV and the 1+ state at 12.71 MeV are clearly seen. The transitions to the 1− state has not been observed previously. In addition we see decays to structures of natural parity at excitation energies around 11-13 MeV. The results illustrate that the indirect detection of γ-decays is an effective technique for studying the low lying resonance spectrum of 12C

  16. Study of Nuclear Reactions with 11C and 15O Radioactive Ion Beams

    International Nuclear Information System (INIS)

    Nuclear reaction study with radioactive ion beams is one of the most exciting research topics in modern nuclear physics. The development of radioactive ion beams has allowed nuclear scientists and engineers to explore many unknown exotic nuclei far from the valley of nuclear stability, and to further our understanding of the evolution of the universe. The recently developed radioactive ion beam facility at the Lawrence Berkeley National Laboratory's 88-inch cyclotron is denoted as BEARS and provides 11C, 14O and 15O radioactive ion beams of high quality. These moderate to high intensity, proton-rich radioactive ion beams have been used to explore the properties of unstable nuclei such as 12N and 15F. In this work, the proton capture reaction on 11C has been evaluated via the indirect d(11C, 12N)n transfer reaction using the inverse kinematics method coupled with the Asymptotic Normalization Coefficient (ANC) theoretical approach. The total effective 12N → 11C+p ANC is found to be (Ceff12N)2 = 1.83 ± 0.27 fm-1. With the high 11C beam intensity available, our experiment showed excellent agreement with theoretical predictions and previous experimental studies. This study also indirectly confirmed that the 11C(p,γ) reaction is a key step in producing CNO nuclei in supermassive low-metallicity stars, bypassing the slow triple alpha process. The newly developed 15O radioactive ion beam at BEARS was used to study the poorly known level widths of 16F via the p(15O,15O)p reaction. Among the nuclei in the A=16, T=1 isobaric triad, many states in 16N and 16O have been well established, but less has been reported on 16F. Four states of 16F below 1 MeV have been identified experimentally: 0-, 1-, 2-, and 3- (Ex = 0.0, 0.19, 0.42, and 0.72 MeV, respectively). Our study utilized R-matrix analysis and found that the 0- state has a level width of 23.1 ± 2.2 keV, and that the broader 1- state has a width of 91.1 ± 9.9 keV. The level width of the 2- state is found to be 3.3

  17. Reactions with a 10Be beam to study the one-neutron halo nucleus 11Be

    Science.gov (United States)

    Jones, K. L.

    2016-07-01

    Halo nuclei are excellent examples of few-body systems consisting of a core and weakly-bound halo nucleons. Where there is only one nucleon in the halo, as in 11Be, the many-body problem can be reduced to a two-body problem. The contribution of the 1s1/2 orbital to the ground state configuration in 11Be, characterized by the spectroscopic factor, S, has been extracted from direct reaction data by many groups over the past five decades with discrepant results. An experiment was performed at the Holifield Radioactive Ion Beam Facility using a 10Be primary beam at four different energies with the goal of resolving the discrepancy through a consistent analysis of elastic, inelastic, and transfer channels. Faddeev-type calculations, released after the publication of the experimental results, show that dynamic core excitation in the transfer process can lead to reduced differential cross sections at higher beam energies. This reduction would lead to the extraction of decreasing values of S with increasing beam energy. A 10Be(d,p) measurement at Ed greater than 25 MeV is necessary to investigate the effects of core excitation in the reaction.

  18. OVERVIEW OF BERYLLIUM SAMPLING AND ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Brisson, M

    2009-04-01

    Because of its unique properties as a lightweight metal with high tensile strength, beryllium is widely used in applications including cell phones, golf clubs, aerospace, and nuclear weapons. Beryllium is also encountered in industries such as aluminium manufacturing, and in environmental remediation projects. Workplace exposure to beryllium particulates is a growing concern, as exposure to minute quantities of anthropogenic forms of beryllium may lead to sensitization and to chronic beryllium disease, which can be fatal and for which no cure is currently known. Furthermore, there is no known exposure-response relationship with which to establish a 'safe' maximum level of beryllium exposure. As a result, the current trend is toward ever lower occupational exposure limits, which in turn make exposure assessment, both in terms of sampling and analysis, more challenging. The problems are exacerbated by difficulties in sample preparation for refractory forms of beryllium, such as beryllium oxide, and by indications that some beryllium forms may be more toxic than others. This chapter provides an overview of sources and uses of beryllium, health risks, and occupational exposure limits. It also provides a general overview of sampling, analysis, and data evaluation issues that will be explored in greater depth in the remaining chapters. The goal of this book is to provide a comprehensive resource to aid personnel in a wide variety of disciplines in selecting sampling and analysis methods that will facilitate informed decision-making in workplace and environmental settings.

  19. Beryllium - A Unique Material in Nuclear Applications

    International Nuclear Information System (INIS)

    Beryllium, due to its unique combination of structural, chemical, atomic number, and neutron absorption cross section characteristics, has been used successfully as a neutron reflector for three generations of nuclear test reactors at the Idaho National Engineering and Environmental Laboratory (INEEL). The Advanced Test Reactor (ATR), the largest test reactor in the world, has utilized five successive beryllium neutron reflectors and is scheduled for continued operation with a sixth beryllium reflector. A high radiation environment in a test reactor produces radiation damage and other changes in beryllium. These changes necessitate safety analysis of the beryllium, methods to predict performance, and appropriate surveillances. Other nuclear applications also utilize beryllium. Beryllium, given its unique atomic, physical, and chemical characteristics, is widely used as a ''window'' for x-rays and gamma rays. Beryllium, intimately mixed with high-energy alpha radiation emitters has been successfully used to produce neutron sources. This paper addresses operational experience and methodologies associated with the use of beryllium in nuclear test reactors and in ''windows'' for x-rays and gamma rays. Other nuclear applications utilizing beryllium are also discussed

  20. Analysis of impurities in beryllium, affecting evaluation of the tritium breeding ratio

    International Nuclear Information System (INIS)

    In most conceptual fusion power reactor designs, it is proposed to use beryllium as a neutron multiplier in the blanket. Detailed chemical composition of beryllium is necessary for evaluation of the tritium breeding ratio, and estimating the activation and transmutation of beryllium in the fusion reactor. In the present report, special attention was paid to a detailed analysis of impurities in beryllium, relevant to the tritium breeding ratio evaluation. Two different methods were used for the study of impurities: an analysis of the local sample by the ICP-MS method, and an integral analysis of the beryllium assembly, using the pulsed neutron method. The latter method was proposed as the most effective way of analyzing the integral effect to impurities in beryllium on production of the tritium on the lithium-6. The evaluation of the integral effect was based on time behaviour observations of the thermal neutron flux, following the injection of a burst of D-T neutrons into the beryllium assembly. Structural beryllium grade (S-200-F, Brush Wellman Inc.) was used in the study. The influence of the impurities has resulted in a smaller experimental reaction rate for production of the tritium on lithium-6, due to an increase in the parasitic neutron absorption. Experimental data was compared with the reference data and the MCNP Monte Carlo calculations using the JENDL-3.2 data set. Results indicate, that the measured absorption cross section of thermal neutrons in beryllium blocks is approximately 30% larger than the calculated value, based on the data, specified by the manufacturing company. ICP-MS analysis indicated that the impurities include elements such as Li, B, Cd and others. These elements affect the absorption cross section even if the content of impurities is less than 10 ppm. (author)

  1. Cosmis Lithium-Beryllium-Boron Story

    Science.gov (United States)

    Vangioni-Flam, E.; Cassé, M.

    Light element nucleosynthesis is an important chapter of nuclear astrophysics. Specifically, the rare and fragile light nuclei Lithium, Beryllium and Boron (LiBeB) are not generated in the normal course of stellar nucleosynthesis (except Lithium-7) and are, in fact, destroyed in stellar interiors. This characteristic is reflected in the low abundance of these simple species. Up to recently, the most plausible interpretation was that galactic cosmic rays (GCR) interact with interstellar CNO to form LiBeB. Other origins have been also identified, primordial and stellar (Lithium-7) and supernova neutrino spallation (Lithium-7 and Boron-11). In contrast, Beryllium-9, Boron-10 and Lithium-6 are pure spallative products. This last isotope presents a special interest since the Lithium-7/Lithium-6 ratio has been measured in a few halo stars offering a new constraint on the early galactic evolution. However, in the nineties, new observations prompted astrophysicists to reassess the question. Optical measurements of the beryllium and boron abundances in halo stars have been achieved by the 10 meters KECK telescope and the Hubble Space Telescope. These observations indicate a quasi linear correlation between Be and B vs Fe, at least at low metallicity, unexpected on the basis of GCR scenario, predicting a quadratic relationship. As a consequence, the origin and the evolution of the LiBeB nuclei has been revisited. This linearity implies the acceleration of C and O nuclei freshly synthesized and their fragmentation on the the interstellar Hydrogen and Helium. Wolf-Rayet stars and supernovae via the shock waves induced, are the best candidates to the acceleration of their own material enriched into C and O; so LiBeB is produced independently of the Interstellar Medium chemical composition. Moreover, neutrinos emitted by the newly born neutron stars interacting with the C layer of the supernova could produce specifically Lithium-7 and Boron-11. This process is supported by the

  2. On the implementation of a chain nuclear reaction of thermonuclear fusion on the basis of the p+11B process

    International Nuclear Information System (INIS)

    Various theoretical and experimental schemes for implementing a thermonuclear reactor on the basis of the p+11B reaction are considered. They include beam collisions, fusion in degenerate plasmas, ignition upon plasma acceleration by ponderomotive forces, and the irradiation of a solid-state target from 11B with a proton beam under conditions of a Coulomb explosion of hydrogen microdrops. The possibility of employing ultra-short high-intensity laser pulses to initiate the p+11B reaction under conditions far from thermodynamic equilibrium is discussed. This and some other weakly radioactive thermonuclear reactions are promising owing to their ecological cleanness—there are virtually no neutrons among fusion products. Nuclear reactions that follow the p+11B reaction may generate high-energy protons, sustaining a chain reaction, and this is an advantage of the p+11B option. The approach used also makes it possible to study nuclear reactions under conditions close to those in the early Universe or in the interior of stars

  3. On the implementation of a chain nuclear reaction of thermonuclear fusion on the basis of the p+11B process

    Science.gov (United States)

    Belyaev, V. S.; Krainov, V. P.; Zagreev, B. V.; Matafonov, A. P.

    2015-07-01

    Various theoretical and experimental schemes for implementing a thermonuclear reactor on the basis of the p+11B reaction are considered. They include beam collisions, fusion in degenerate plasmas, ignition upon plasma acceleration by ponderomotive forces, and the irradiation of a solid-state target from 11B with a proton beam under conditions of a Coulomb explosion of hydrogen microdrops. The possibility of employing ultra-short high-intensity laser pulses to initiate the p+11B reaction under conditions far from thermodynamic equilibrium is discussed. This and some other weakly radioactive thermonuclear reactions are promising owing to their ecological cleanness—there are virtually no neutrons among fusion products. Nuclear reactions that follow the p+11B reaction may generate high-energy protons, sustaining a chain reaction, and this is an advantage of the p+11B option. The approach used also makes it possible to study nuclear reactions under conditions close to those in the early Universe or in the interior of stars.

  4. Synthesis of 1,1-Diphenylethylene (DPE): The Marriage of a Grignard Reaction and a Column Chromatography Experiment

    Science.gov (United States)

    Alty, Lisa T.; France, Marcia B.; Alty, Isaac G.; Saber, Christine A.; Smith, Donna M.

    2016-01-01

    The synthesis of 1,1-diphenylethylene (DPE) via a Grignard reaction, followed by an acid-catalyzed dehydration reaction, yields a mixture of compounds. DPE is a high boiling liquid that cannot be purified using simple distillation. However, it is easily separated from the more polar starting material and intermediate alcohol using both thin layer…

  5. Compatibility problems with beryllium in ceramic blankets

    International Nuclear Information System (INIS)

    Compatibility of beryllium with structural materials (316L austenitic steel and 1.4914 martensitic steel) and with tritium breeding ceramics (lithium aluminate or silicate) has been studied in contact tests between 550 C and 700 C and for durations reaching 3000 hours. Beryllium-ceramic interaction is negligeable in all the temperature range with aluminate and up to 600 C with silicates. On the other hand, noticeable interaction is observed between beryllium and 316L steel at 580 C and above. Beryllium interaction with 1.4914 steel is visible only at 650 C and above and its amplitude is lower than 316L steel one. In these two cases, the superficial layer is brittle, and adherent to the steel. Comparison between beryllium - 0.4 wt% calcium alloy and beryllium at 700 C shows that interaction with steels or ceramics is qualitatively the same but slightly weaker. (author). 6 refs.; 6 figs.; 3 tabs

  6. Belgian research on fusion beryllium waste

    International Nuclear Information System (INIS)

    Future fusion power plants will generate important quantities of neutron irradiated beryllium. Although recycling is the preferred management option for this waste, this may not be technically feasible for all of the beryllium, because of its radiological characteristics. Therefore, at SCK·CEN, we initiated a research programme aimed at studying aspects of the disposal of fusion beryllium, including waste characterisation, waste acceptance criteria, conditioning methods, and performance assessment. One of the main issues to be resolved is the development of fusion-specific waste acceptance criteria for surface or deep geological disposal, in particular with regard to the tritium content. In case disposal is the only solution, critical nuclides can be immobilised by conditioning the waste. As a first approach to immobilising beryllium waste, we investigated the vitrification of beryllium. Corrosion tests were performed on both metallic and vitrified beryllium to provide source data for performance assessment. Finally, a first step in performance assessment was undertaken. (author)

  7. Advances in Identifying Beryllium Sensitization and Disease

    Directory of Open Access Journals (Sweden)

    Peter Kowalski

    2010-01-01

    Full Text Available Beryllium is a lightweight metal with unique qualities related to stiffness, corrosion resistance, and conductivity. While there are many useful applications, researchers in the 1930s and l940s linked beryllium exposure to a progressive occupational lung disease. Acute beryllium disease is a pulmonary irritant response to high exposure levels, whereas chronic beryllium disease (CBD typically results from a hypersensitivity response to lower exposure levels. A blood test, the beryllium lymphocyte proliferation test (BeLPT, was an important advance in identifying individuals who are sensitized to beryllium (BeS and thus at risk for developing CBD. While there is no true "gold standard" for BeS, basic epidemiologic concepts have been used to advance our understanding of the different screening algorithms.

  8. Reliable set-up for in-loop 11C-carboxylations using Grignard reactions for the preparation of [carbonyl-11C]WAY-100635 and [11C]-(+)-PHNO

    International Nuclear Information System (INIS)

    Aim of this work was the implementation of a generalized in-loop synthesis for 11C-carboxylations and subsequent 11C-acylations on the TRACERlab FxC Pro platform. The set-up was tested using [carbonyl-11C]WAY-100635 and, for the first time, [11C]-(+)-PHNO. Its general applicability could be demonstrated and both [carbonyl-11C]WAY-100635 and [11C]-(+)-PHNO were prepared with high reliability and satisfying outcome. - Highlights: • Generalized method for in-loop 11C-carboxylations implemented. • Grignard reactions successfully tested. • First in-loop procedure for [11C]-(+)PHNO established. • Satisfactory synthesis outcome for both [carbonyl-11C]WAY-100635 and [11C]-(+)PHNO. • No distillation for purification of intermediate required

  9. Thermodynamic properties of beryllium hydroxide

    International Nuclear Information System (INIS)

    The study of the hydro-thermal decomposition of beryllium hydroxide has made it possible to determine the free energy of formation and the entropy. The results obtained are in good agreement with the theoretical values calculated from the solubility product of this substance. They give furthermore the possibility of acquiring a better understanding of the BeO-H2O-Be (OH)2 system between 20 and 1500 C. (authors)

  10. Current Treatment of Chronic Beryllium Disease

    OpenAIRE

    Sood, Akshay

    2009-01-01

    The current mainstay of management of chronic beryllium disease involves cessation of beryllium exposure and use of systemic corticosteroids. However, there are no randomized controlled trials to assess the effect of these interventions on the natural history of this disease. Despite this limitation, it is prudent to remove patients with chronic beryllium disease from further exposure and consider treating progressive disease early with long-term corticosteroids. The effect of treatment shoul...

  11. MEASUREMENTS OF THE PROPERTIES OF BERYLLIUM FOIL

    International Nuclear Information System (INIS)

    The electrical conductivity of beryllium at radio frequency (800 MHz) and liquid nitrogen temperature were investigated and measured. This summary addresses a collection of beryllium properties in the literature, an analysis of the anomalous skin effect, the test model, the experimental setup and improvements, MAFIA simulations, the measurement results and data analyses. The final results show that the conductivity of beryllium is not as good as indicated by the handbook, yet very close to copper at liquid nitrogen temperature

  12. New audio applications of beryllium metal

    International Nuclear Information System (INIS)

    The major applications of beryllium metal in the field of audio appliances are for the vibrating cones for the two types of speakers 'TWITTER' for high range sound and 'SQUAWKER' for mid range sound, and also for beryllium cantilever tube assembled in stereo cartridge. These new applications are based on the characteristic property of beryllium having high ratio of modulus of elasticity to specific gravity. The production of these audio parts is described, and the audio response is shown. (author)

  13. The beryllium "double standard" standard.

    Science.gov (United States)

    Egilman, David S; Bagley, Sarah; Biklen, Molly; Golub, Alison Stern; Bohme, Susanna Rankin

    2003-01-01

    Brush Wellman, the world's leading producer and supplier of beryllium products, has systematically hidden cases of beryllium disease that occurred below the threshold limit value (TLV) and lied about the efficacy of the TLV in published papers, lectures, reports to government agencies, and instructional materials prepared for customers and workers. Hypocritically, Brush Wellman instituted a zero exposure standard for corporate executives while workers and customers were told the 2 microgram standard was "safe." Brush intentionally used its workers as "canaries for the plant," and referred to them as such. Internal documents and corporate depositions indicate that these actions were intentional and that the motive was money. Despite knowledge of the inadequacy of the TLV, Brush has successfully used it as a defense against lawsuits brought by injured workers and as a sales device to provide reassurance to customers. Brush's policy has reaped an untold number of victims and resulted in mass distribution of beryllium in consumer products. Such corporate malfeasance is perpetuated by the current market system, which is controlled by an organized oligopoly that creates an incentive for the neglect of worker health and safety in favor of externalizing costs to victimized workers, their families, and society at large. PMID:14758859

  14. Field-controlled electron transfer and reaction kinetics of the biological catalytic system of microperoxidase-11 and hydrogen peroxide

    OpenAIRE

    Yongki Choi; Siu-Tung Yau

    2011-01-01

    Controlled reaction kinetics of the bio-catalytic system of microperoxidase-11 and hydrogen peroxide has been achieved using an electrostatic technique. The technique allowed independent control of 1) the thermodynamics of the system using electrochemical setup and 2) the quantum mechanical tunneling at the interface between microperoxidase-11 and the working electrode by applying a gating voltage to the electrode. The cathodic currents of electrodes immobilized with microperoxidase-11 showed...

  15. Recommended design correlations for S-65 beryllium

    International Nuclear Information System (INIS)

    The properties of tritium and helium behavior in irradiated beryllium are reviewed, along with the thermal-mechanical properties needed for ITER design analysis. Correlations are developed to describe the performance of beryllium in a fusion reactor environment. While this paper focuses on the use of beryllium as a plasma-facing component (PFC) material, the correlations presented here can also be used to describe the performance of beryllium as a neutron multiplier for a tritium breeding blanket. The performance properties for beryllium are subdivided into two categories: properties which do not change with irradiation damage to the bulk of the material; and properties which are degraded by neutron irradiation. The approach taken in developing properties correlations is to describe the behavior of dense, pressed S-65 beryllium as a function of temperature. As there are essentially no data on the performance of porous and/or irradiated S-65 beryllium, the degradation of properties with as-fabricated porosity and irradiation are determined form the broad data base on S-200F, as well as other types and grades, and applied to S-65 beryllium by scaling factors. The resulting correlations can be used for Be produced by vacuum hot pressing (VHP) and cold-pressing (CP)/sintering(S)/hot-isostatic-pressing(HIP). The performance of plasma-sprayed beryllium is discussed but not quantified

  16. (Beryllium). Internal Report No. 137, Jan. 15, 1958

    International Nuclear Information System (INIS)

    After a brief summary of the physical and chemical properties of beryllium, the various chemical treatments which can be applied to beryllium minerals either directly or after a physical enrichment are discussed. These various treatments give either the hydroxide or beryllium salts, from which either beryllium oxide or metallic beryllium can easily be obtained. The purification, analysis and uses of beryllium are also briefly discussed. (author)

  17. Hanford Site Beryllium Program: Past, Present, and Future - 12428

    International Nuclear Information System (INIS)

    assuring that consensus was achieved on products developed as part of the CAP and the closure process. The original CAP was developed based on a large number of actions developed from the HSS report. This was essentially a 'bottoms up' approach. The revised CAP development team concluded that a more holistic, process-based approach was appropriate to assure that the resulting deliverable resulted in a best-in-class product. Consequently, issues and recommendations contained in the HSS report were grouped into 11 program areas, specific product deliverables were identified within each of the program areas, and a work breakdown structure (WBS) was logically applied to number the groupings. While the revised approach to product development utilizes a more holistic, 'top down' approach, the intent was still to incorporate specific recommendations and address specific issues contained in the HSS report. Through implementation of this new approach, a collaborative team has been established that works together using a consensus process for ensuring product completion. Benefits of the new approach include building a level of trust amongst all parties, quality of the products have improved, and acceptance by all parties of what action will truly meet the intent of the deficiency and make the beryllium program stronger. Open dialogue occurs amongst the core Be CAP team members, Hanford contractors, and DOE. It has been a learning process and will continue to be one, but everyone shares the common goal of reducing worker exposure to beryllium. (authors)

  18. Electron microscope study of irradiated beryllium oxide

    International Nuclear Information System (INIS)

    The beryllium oxide is studied first by fractography, before and after irradiation, using sintered samples. The fractures are examined under different aspects. The higher density sintered samples, with transgranular fractures are the most interesting for a microscopic study. It is possible to mark the difference between the 'pores' left by the sintering process and the 'bubbles' of gases that can be produced by former thermal treatments. After irradiation, the grain boundaries are very much weakened. By annealing, it is possible to observe the evolution of the gases produced by the reaction (n, 2n) and (n. α) and gathered on the grain boundaries. The irradiated beryllium oxide is afterwards studied by transmission. For that, a simple method has been used: little chips of the crushed material are examined. Clusters of point defects produced by neutrons are thus detected in crystals irradiated at the three following doses: 6 x 1019, 9 x 1019 and 2 x 1020 nf cm-2 at a temperature below 100 deg. C. For the irradiation at 6 x 1019 nf cm-2, the defects are merely visible, but at 2 x l020 nf cm-2 the crystals an crowded with clusters and the Kikuchi lines have disappeared from the micro-diffraction diagrams. The evolution of the clusters into dislocation loops is studied by a series of annealings. The activation energy (0,37 eV) calculated from the annealing curves suggests that it must be interstitials that condense into dislocation loops. Samples irradiated at high temperatures (650, 900 and 1100 deg. C) are also studied. In those specimens the size of the loops is not the same as the equilibrium size obtained after out of pile annealing at the same temperature. Those former loops are more specifically studied and their Burgers vector is determined by micro-diffraction. (author)

  19. Investigation on the production of evaporation residues in 11B + natY reaction: 97Ru is a notable product

    International Nuclear Information System (INIS)

    This study indicates that the 11B induced reaction on natural Y is also an efficient route for the production of nca neutron deficient 97Ru. Although cross-sectional data are obtained just at two energies and not sufficient to derive significant conclusion on the reaction mechanism, but the measured cross-sectional data are in agreement with Houser-Feshbach model estimation. The data also shed light on the compound nuclear reaction as a major contributor. We look forward to study the reaction in the energy range ∼30-70 MeV in near future

  20. One-nucleon transfer reactions induced by secondary beam of 11Be: study of the nuclear structure of the exotic nuclei 11Be and 10Li

    International Nuclear Information System (INIS)

    The structure of the neutron rich light nuclei 11Be and 10Li has been investigated by means of one nucleon transfer reactions. The experiments have been carried out at GANIL in inverse kinematics using 11Be secondary beams. The 11Be(p,d)10Be reaction bas been studied at 35.3 MeV/u. The 10Be ejectiles were analyzed by the spectrometer SPEG, and coincident deuterons were detected in the position sensitive silicon detector CHARISSA. Transfer cross sections to 0+1 and 2+1, states in 10Be were measured up to θCM = 16 deg. and compared to DWBA and CRC predictions. The effects of neutron-cure couplings on reaction form factors have been studied by solving coupled equations in the framework of a vibrational model. It is shown that the rate of core excitation 10Be2+ in the 11Begs wave function is overestimated by a standard analysis with form factors given by the usual Separation Energy prescription. The former model predicts a rate of core excitation of 16% and leads to theoretical cross sections which are in good agreement with the experimental data. The aim of the 11Be(d,3He)10Li experiment, realized at 37 MeV/u, was to measure the distribution of the 2s neutron strength in the unbound nucleus 10Li. The energy spectrum was deduced from the 3He energy and angle measured by the silicon strip detector array MUST. An asymmetric peak is clearly observed near the threshold, with a maximum at -Sn = 130 keV. This constitutes a direct proof of the inversion of 2s and 1p1/2 shells in 10Li, which was until now a controversial question in spite of many experimental efforts. On the other band the analysis of the 11Be(d,t)10Be reaction studied in the same experiment confirms the results obtained in the 11Be(p,d)10Be reaction concerning the 11Begs structure. This work shows the interest and feasibility of studies of the shell properties of exotic nuclei using transfer reactions induced by radioactive beams and constitutes the beginning of a program devoted to this kind of experiment

  1. Geochemistry of beryllium in Bulgarian coals

    Energy Technology Data Exchange (ETDEWEB)

    Eskenazy, Greta M. [Geology Department, University of Sofia ' St. Kl. Ohridski' , Tzar Osvoboditel 15, Sofia 1504 (Bulgaria)

    2006-04-03

    The beryllium content of about 3000 samples (coal, coaly shales, partings, coal lithotypes, and isolated coalified woods) from 16 Bulgarian coal deposits was determined by atomic emission spectrography. Mean Be concentrations in coal show great variability: from 0.9 to 35 ppm for the deposits studied. There was no clear-cut relationship between Be content and rank. The following mean and confidence interval Be values were measured: lignites, 2.6+/-0.8 ppm; sub-bituminous coals, 8.2+/-3.3 ppm; bituminous coals, 3.0+/-1.2 ppm; and anthracites, 19+/-9.0 ppm. The Be contents in coal and coaly shales for all deposits correlated positively suggesting a common source of the element. Many samples of the coal lithotypes vitrain and xylain proved to be richer in Be than the hosting whole coal samples as compared on ash basis. Up to tenfold increase in Be levels was routinely recorded in fusain. The ash of all isolated coalified woods was found to contain 1.1 to 50 times higher Be content relative to its global median value for coal inclusions. Indirect evidence shows that Be occurs in both organic and inorganic forms. Beryllium is predominantly organically bound in deposits with enhanced Be content, whereas the inorganic form prevails in deposits whose Be concentration approximates Clarke values. The enrichment in Be exceeding the coal Clarke value 2.4 to 14.5 times in some of the Bulgarian deposits is attributed to subsynchronous at the time of coal deposition hydrothermal and volcanic activity. (author)

  2. Methods for the mitigation of the chemical reactivity of beryllium in steam

    International Nuclear Information System (INIS)

    In the safety assessment of future fusion reactors, the reaction of beryllium with steam remains one of the main concerns. In this case of a loss of coolant accident (LOCA), the use of beryllium in combination with pressurized water as coolant can lead to excessive hydrogen production due to the reaction Be + H2O = BeO +H2 +heat. Because of the explosion hazard associated with this phenomenon, the hydrogen generation rate during a LOCA should be reduced as much as possible. Therefore, we started an R and D programme aimed at investigating mitigation methods for the beryllium/steam reaction. Beryllium samples were implanted in a 210 kV ion implanter at ITN (Institute Technologico e Nuclear) Lisbon, with calcium and aluminum ions respectively in a 210 kV ion implanter at ITN Lisbon. The average implantation depth was estimated at 100 nm for both elements. The chemical activity of these samples in steam was then measured at SCK-CEN (The Belgian Nuclear Research Center) in a dedicated experimental facility providing coupled thermogravimetry/mass spectrometry. The observed oxidation kinetics was parabolic. In comparison to reference un-doped material, the reactivity of doped beryllium after 30 minutes of exposure decreased with a factor 2 to 4. The mitigating effect was higher for calcium-doped than for aluminum-doped samples. As a second approach, beryllium pebbles were pre-oxidized in dry air at 400 degree C during ten hours. This did not result in an appreciable decrease in chemical activity. The results indicate that doping may be a viable means of mitigating the chemical activity of beryllium in steam. (author)

  3. Four workshops in alternate concepts in controlled fusion. Part C. CTR using the p-11B reaction

    International Nuclear Information System (INIS)

    Clean and efficient energy production by fusion is possible in principle by using any one of a variety of so called advanced fusion fuels. Among these choices, the nuclear reaction of protium (p) and boron-11 (B11) offers the benefits of a large reaction cross section, no neutron production, and no tritium production or consumption. Compared with deuterium-tritium (D--T) fusion systems, these characteristics offer significant engineering and operational potential. Use of the p-B11 fuel cycle requires high temperature and very effective plasma confinement. Based on new confinement results in magnetic multipole configurations, our recalculation of the p-B11 energy balance for selected operating conditions shows the possibility for significant energy production. Radiation losses are reduced to an acceptable level by two means: one, operation at an ion temperature of 300 keV and an electron temperature of 150 keV, and two, reducing the magnetic field in the bulk of the plasma to a small value by use of the multipole configuration. The multipole configuration is available to the neutron-free p-B11 cycle but not the D-T cycle because it employs internal cryogenic conductors. Energy conversion is proposed by means of radiative transfer to the walls of the reactor. Critical issues include uncertainties in the p-B11 cross section, the achievable level of field free region and the confinement scaling to reaction temperatures, effects of helium ash, and the level of neutron production by parasitic reactions

  4. Tenant reaction patterns to the threat of a terrorist attack after September 11, 2001, in downtown Chicago office market

    OpenAIRE

    Sofia Dermisi

    2005-01-01

    The events of September 11, 2001 (9/11) spread the fear of other terrorist attacks targeting downtown office buildings across other major U.S. cities. Among them, Chicago owners and tenants were even more concerned because of the concentration of corporate headquarters and the site of the tallest office building in the U.S. This paper studies the tenant reactions in response to the 9/11 attacks in three locations within the Chicago’s downtown office market, comparing the before and after 9/11...

  5. ICT diagnostic method of beryllium welding quality

    International Nuclear Information System (INIS)

    To avoid the interference of high density material for the quality assay of beryllium welding line, a slice by slice scanning method was proposed based upon the research results of the Industrial Computerized Tomography (ICT) diagnostics for weld penetration, weld width, off-centered deviation and weld defects of beryllium-ring welding seam with high density material inside

  6. Some aspects of beryllium disposal in Kazakhstan

    International Nuclear Information System (INIS)

    Historically in Kazakhstan all disposals of used beryllium and beryllium wasted materials were stored and recycled at JSC ''Ulba Metallurgical Plant''. Since Ulba Metallurgical Plant (beside beryllium and tantalum production) is one of the world largest complex producers of fuel for nuclear power plants as well it has possibilities, technologies and experience in processing toxic and radioactive wastes related with those productions. At present time only one operating Kazakhstan research reactors (EWG1M in Kurchatov) contains beryllium made core. The results of current examination of that core allow using it without replacement long time yet (at least for next five-ten years). Nevertheless the problem how to utilize such irradiated beryllium becomes actual issue for Kazakhstan even today. Since Kazakhstan is the member of ITER/DEMO Reactors Projects and is permanently considered as possible provider of huge amount of beryllium for those reactors so that is the reason for starting studies of possibilities of large scale processing/recycling of such disposed irradiated beryllium. It is clear that the Ulba Metallurgical Plant is considered as the best site for it in Kazakhstan. The draft plan how to organize experimental studies of irradiated beryllium disposals in Kazakhstan involving National Nuclear Center, National University (Almaty), JSC ''Ulba Metallurgical Plant'' (Ust-Kamenogorsk) would be presented in this paper as well as proposals to arrange international collaboration in that field through ISTC (International Science Technology Center, Moscow). (author)

  7. Metastable defects in beryllium oxide crystals

    International Nuclear Information System (INIS)

    The metastable luminescence centers of regular lattice are investigated in binary beryllium oxide crystals. Beryllium oxide hexagonal crystals are the simplest among low-symmetry oxide scintillators and serve as a model system. The anisotropy of energy transformation and transfer is analyzed

  8. Investigation of beryllium/steam interaction

    Energy Technology Data Exchange (ETDEWEB)

    Chekhonadskikh, A.M.; Vurim, A.D.; Vasilyev, Yu.S.; Pivovarov, O.S. [Inst. of Atomic Energy National Nuclear Center of the Republic of Kazakstan Semipalatinsk (Kazakhstan); Shestakov, V.P.; Tazhibayeva, I.L.

    1998-01-01

    In this report program on investigations of beryllium emissivity and transient processes on overheated beryllium surface attacked by water steam to be carried out in IAE NNC RK within Task S81 TT 2096-07-16 FR. The experimental facility design is elaborated in this Report. (author)

  9. Modeling of hydrogen interactions with beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Longhurst, G.R. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States)

    1998-01-01

    In this paper, improved mathematical models are developed for hydrogen interactions with beryllium. This includes the saturation effect observed for high-flux implantation of ions from plasmas and retention of tritium produced from neutronic transmutations in beryllium. Use of the models developed is justified by showing how they can replicated experimental data using the TMAP4 tritium transport code. (author)

  10. Investigations of the ternary system beryllium-carbon-tungsten and analyses of beryllium on carbon surfaces; Untersuchung des ternaeren Systems Beryllium-Kohlenstoff-Wolfram und Betrachtungen von Beryllium auf Kohlenstoffoberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Kost, Florian

    2009-05-25

    . Depending on the layer sequence, carbide formation is complete in the temperature range between 570 and 770 K. Be{sub 2}W alloy formation only takes place if further metallic beryllium is available after carbide formation. Be{sub 2}C and Be{sub 2}W dissociate at temperatures T>1170 K. Based on RBS analysis of C/Be/W systems of several 100 nm thickness, the concentration dependent diffusion coefficient for Be in W was determined. Only Be{sub 12}W formation was observed due to the large beryllium reservoir. Carbide formation (Be{sub 2}C) is not observed until the alloy formation is completed. Furthermore, the first successful depth-resolved XPS measurements were performed on ternary layer systems using synchrotron radiation. The reactions in the ternary system are restricted to compounds that are already known from binary system investigations. No further Be, C, W-containing species are detected. Beryllium carbide is dominant in the system as long as it does not dissociate. (orig.)

  11. Assessment of LANL beryllium waste management documentation

    International Nuclear Information System (INIS)

    The objective of this report is to determine present status of the preparation and implementation of the various high priority documents required to properly manage the beryllium waste generated at the Laboratory. The documents being assessed are: Waste Acceptance Criteria, Waste Characterization Plan, Waste Certification Plan, Waste Acceptance Procedures, Waste Characterization Procedures, Waste Certification Procedures, Waste Training Procedures and Waste Recordkeeping Procedures. Beryllium is regulated (as a dust) under 40 CFR 261.33 as ''Discarded commercial chemical products, off specification species, container residues and spill residues thereof.'' Beryllium is also identified in the 3rd thirds ruling of June 1, 1990 as being restricted from land disposal (as a dust). The beryllium waste generated at the Laboratory is handled separately because beryllium has been identified as a highly toxic carcinogenic material

  12. Beryllium for fusion application - recent results

    Science.gov (United States)

    Khomutov, A.; Barabash, V.; Chakin, V.; Chernov, V.; Davydov, D.; Gorokhov, V.; Kawamura, H.; Kolbasov, B.; Kupriyanov, I.; Longhurst, G.; Scaffidi-Argentina, F.; Shestakov, V.

    2002-12-01

    The main issues for the application of beryllium in fusion reactors are analyzed taking into account the latest results since the ICFRM-9 (Colorado, USA, October 1999) and presented at 5th IEA Be Workshop (10-12 October 2001, Moscow Russia). Considerable progress has been made recently in understanding the problems connected with the selection of the beryllium grades for different applications, characterization of the beryllium at relevant operational conditions (irradiation effects, thermal fatigue, etc.), and development of required manufacturing technologies. The key remaining problems related to the application of beryllium as an armour in near-term fusion reactors (e.g. ITER) are discussed. The features of the application of beryllium and beryllides as a neutron multiplier in the breeder blanket for power reactors (e.g. DEMO) in pebble-bed form are described.

  13. BERYLLIUM MEASUREMENT IN COMMERCIALLY AVAILABLE WET WIPES

    Energy Technology Data Exchange (ETDEWEB)

    Youmans-Mcdonald, L.

    2011-02-18

    Analysis for beryllium by fluorescence is now an established method which is used in many government-run laboratories and commercial facilities. This study investigates the use of this technique using commercially available wet wipes. The fluorescence method is widely documented and has been approved as a standard test method by ASTM International and the National Institute for Occupational Safety and Health (NIOSH). The procedure involves dissolution of samples in aqueous ammonium bifluoride solution and then adding a small aliquot to a basic hydroxybenzoquinoline sulfonate fluorescent dye (Berylliant{trademark} Inc. Detection Solution Part No. CH-2) , and measuring the fluorescence. This method is specific to beryllium. This work explores the use of three different commercial wipes spiked with beryllium, as beryllium acetate or as beryllium oxide and subsequent analysis by optical fluorescence. The effect of possible interfering metals such as Fe, Ti and Pu in the wipe medium is also examined.

  14. Postirradiation examination of beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Gelles, D.S. [Pacific Northwest National Lab., Richland, WA (United States)

    1998-03-01

    Postirradiation examinations of COBRA-1A beryllium pebbles irradiated in the EBR-II fast reactor at neutron fluences which generated 2700--3700 appm helium have been performed. Measurements included density change, optical microscopy, scanning electron microscopy, and transmission electron microscopy. The major change in microstructure is development of unusually shaped helium bubbles forming as highly non-equiaxed thin platelet-like cavities on the basal plane. Measurement of the swelling due to cavity formation was in good agreement with density change measurements.

  15. Technical issues for beryllium use in fusion blanket applications

    International Nuclear Information System (INIS)

    Beryllium is an excellent non-fissioning neutron multiplier for fusion breeder and fusion electric blanket applications. This report is a compilation of information related to the use of beryllium with primary emphasis on the fusion breeder application. Beryllium resources, production, fabrication, properties, radiation damage and activation are discussed. A new theoretical model for beryllium swelling is presented

  16. Gas retention in irradiated beryllium

    International Nuclear Information System (INIS)

    Helium (an inert gas) with low solubility in beryllium is trapped in irradiated beryllium at low temperatures (22 n/cm2 (E > 1 MeV). In these samples the calculated helium generated was ∼ 14,000 appm. They are described in terms of swelling, annealing, microstructure, and helium bubble behavior (size, density and mobility). A second sample was irradiated to ∼5 x 1022 n/cm2 (E > 1 MeV). In that one the calculated helium and tritium generated were ∼24,000 appm He and ∼3720 appm, and tritium content was examined in a dissolution experiment. Most of the tritium was released as gas to the glovebox indicating the generated tritium was retained in the helium bubbles. In a third set of experiments a specimen was examined by annealing at a succession of temperatures to more than 600 degree C for tritium release. In the temperature range of 300--500 degree C little release (0.01--0.4%) occurred, but there was a massive release at just over 600 degree C. Theories of swelling appear to adequately describe bubble behavior with breakaway release occurring at high helium contents and at large bubble diameters. 8 refs., 6 figs

  17. The unusual properties of beryllium surfaces

    International Nuclear Information System (INIS)

    Be is a ''marginal metal.'' The stable phase, hcp-Be, has a low Fermi-level density of states and very anisotropic structural and elastic properties, similar to a semiconductor's. At the Be(0001) surface, surface states drastically increase the Fermi-level density of states. The different nature of bonding in bulk-Be and at the Be(0001) surface explains the large outward relaxation. The presence of surface states causes large surface core-level shifts by inducing a higher electrostatic potential in the surface layers and by improving the screening at the surface. The authors experimental and theoretical investigations of atomic vibrations at the Be(0001) surface demonstrate clearly that Be screening of atomic motion by the surface states makes the surface phonon dispersion fundamentally different from that of the bulk. Properties of Be(0001) are so different from those of the bulk that the surface can be considered a new ''phase'' of beryllium with unique electronic and structural characteristics. For comparison they also study Be(11 bar 20), a very open surface without important surface states. Be(11 bar 20) is the only clean s-p metal surface known to reconstruct (1 x 3 missing row reconstruction)

  18. Electron microscope study of thin beryllium lamellae (1963)

    International Nuclear Information System (INIS)

    Thin SR beryllium lamellae are examined by electron microscopy after various treatments, together with other samples made up of Be - Fe at 1 per cent and 0.2 per cent iron. The SR beryllium is examined after annealing at 750 deg C and 900 deg C, strongly cold-worked and quenched at 900 deg C. At 950 deg C the metal is perfectly annealed; at 750 deg C the polygonisation is almost complete, the dislocations are arranged either is dislocation walls in the prismatic planes, or in hexagonal lattices with non-dissociated nodes suggesting a high stacking defect energy. The cold-worked structure has a high dislocation density and already existing crystal walls. In the quenched state, the few dislocations are very straight and are aligned in the crystallographic directions. Iron-precipitation is studied in two alloys during tempering at 660 deg after quenching in salt water. The precipitate appears at the grain boundaries and then spreads through the matrix leaving a depleted zone in the neighbourhood of the joints. These precipitates, in the form of platelets parallel to the base planes of the beryllium lattice have been identified as the inter metallic phase Be11 Fe oriented in relation to the matrix (0 0 0 1)//(0 0 0 1) (1 0 1-bar 0)//(1 1 2-bar 0). (authors)

  19. Steam chemical reactivity of plasma-sprayed beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Anderl, R.A.; Pawelko, R.J.; Smolik, G.R. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States). Idaho National Engineering and Environmental Lab.; Castro, R.G. [Los Alamos National Lab., NM (United States)

    1998-07-01

    Plasma-spraying with the potential for in-situ repair makes beryllium a primary candidate for plasma facing and structural components in experimental magnetic fusion machines. Deposits with good thermal conductivity and resistance to thermal cycling have been produced with low pressure plasma-spraying (LPPS). A concern during a potential accident with steam ingress is the amount of hydrogen produced by the reactions of steam with hot components. In this study the authors measure the reaction rates of various deposits produced by LPPS with steam from 350 C to above 1,000 C. They correlate these reaction rates with measurements of density, open porosity and BET surface areas. They find the reactivity to be largely dependent upon effective surface area. Promising results were obtained below 600 C from a 94% theoretical dense (TD) deposit with a BET specific surface area of 0.085 m{sup 2}/g. Although reaction rates were higher than those for dense consolidated beryllium they were substantially lower, i.e., about two orders of magnitude, than those obtained from previously tested lower density plasma-sprayed deposits.

  20. Fluorimetric method for determination of Beryllium

    International Nuclear Information System (INIS)

    The old fluorimetric method for the determination of Beryllium, based essentially on the fluorescence of the Beryllium-Morine complex in a strongly alkaline solution, is still competitive and stands the comparison with more modern methods or at least three reasons: in the presence of solid or gaseous samples (powders), the times necessary to finalize an analytic determination are comparable since the stage of the process which lasts the longest is the mineralization of the solid particles containing Beryllium, the cost of a good fluorimeter is by far Inferior to the cost, e. g., of an Emission Spectrophotometer provided with ICP torch and magnets for exploiting the Zeeman effect and of an Atomic absorption Spectrophotometer provided with Graphite furnace; it is possible to determine, fluorimetrically, rather small Beryllium levels (about 30 ng of Beryllium/sample), this potentiality is more than sufficient to guarantee the respect of all the work safety and hygiene rules now in force. The study which is the subject of this publication is designed to the analysis procedure which allows one to reach good results in the determination of Beryllium, chiefly through the control and measurement of the interference effect due to the presence of some metals which might accompany the environmental samples of workshops and laboratories where Beryllium is handled, either at the pure state or in its alloys. The results obtained satisfactorily point out the merits and limits of this analytic procedure

  1. Impact of HFIR LEU Conversion on Beryllium Reflector Degradation Factors

    Energy Technology Data Exchange (ETDEWEB)

    Ilas, Dan [ORNL

    2013-10-01

    An assessment of the impact of low enriched uranium (LEU) conversion on the factors that may cause the degradation of the beryllium reflector is performed for the High Flux Isotope Reactor (HFIR). The computational methods, models, and tools, comparisons with previous work, along with the results obtained are documented and discussed in this report. The report documents the results for the gas and neutronic poison production, and the heating in the beryllium reflector for both the highly enriched uranium (HEU) and LEU HFIR configurations, and discusses the impact that the conversion to LEU may have on these quantities. A time-averaging procedure was developed to calculate the isotopic (gas and poisons) production in reflector. The sensitivity of this approach to different approximations is gauged and documented. The results show that the gas is produced in the beryllium reflector at a total rate of 0.304 g/cycle for the HEU configuration; this rate increases by ~12% for the LEU case. The total tritium production rate in reflector is 0.098 g/cycle for the HEU core and approximately 11% higher for the LEU core. A significant increase (up to ~25%) in the neutronic poisons production in the reflector during the operation cycles is observed for the LEU core, compared to the HEU case, for regions close to the core s horizontal midplane. The poisoning level of the reflector may increase by more than two orders of magnitude during long periods of downtime. The heating rate in the reflector is estimated to be approximately 20% lower for the LEU core than for the HEU core. The decrease is due to a significantly lower contribution of the heating produced by the gamma radiation for the LEU core. Both the isotopic (gas and neutronic poisons) production and the heating rates are spatially non-uniform throughout the beryllium reflector volume. The maximum values typically occur in the removable reflector and close to the midplane.

  2. Nuclear reactions and electromagnetic dissociation of 8Li, 9Li, 11Li at 100 MeV/n

    International Nuclear Information System (INIS)

    Measurements of nuclear reaction and electromagnetic dissociation cross-sections have been performed at SATURNE with secondary beams of 8Li, 9Li, 11Li interacting with C, Al, Cu, Sn, Pb targets at energies around 100 MeV/n. The detection method relies on beta-decay characteristics, energy-loss, total energy and range measurements

  3. Use of AlPO-11, SnAPO-11, SAPO-31 and SAPO-41 Elaborated Solid Materials as Catalysts in Ammonia Alkylation Reaction

    Science.gov (United States)

    Khemaissia, Sihem; Nibou, Djamel; Amokrane, Samira; Lebaili, Nemcha

    The present study deals with the synthesis of octylamines by ammonia alkylation with octanol-1 in gaseous phase using solid microporous materials as AlPO-11, SnAPO-11, SAPO-31 and SAPO-41. They were prepared by hydrothermal process in Teflon steel less reactor under autogenic pressure and at determined temperatures. SAPO-31 material was obtained using HF acid and without fluoride media. The materials have presented a catalytic activity in the study reaction. Primary isomers (MOA) were obtained with better selectivity of about 85 to 99%. Silicium and tin are the origin of the acidity and are responsible to the activity catalytic of SnAPO-11 and SAPO-31 materials.

  4. Investigation of the role of 10Li resonances in the halo structure of 11Li through the 11Li (p , d)10Li transfer reaction

    Science.gov (United States)

    Sanetullaev, A.; Kanungo, R.; Tanaka, J.; Alcorta, M.; Andreoiu, C.; Bender, P.; Chen, A. A.; Christian, G.; Davids, B.; Fallis, J.; Fortin, J. P.; Galinski, N.; Gallant, A. T.; Garrett, P. E.; Hackman, G.; Hadinia, B.; Ishimoto, S.; Keefe, M.; Krücken, R.; Lighthall, J.; McNeice, E.; Miller, D.; Purcell, J.; Randhawa, J. S.; Roger, T.; Rojas, A.; Savajols, H.; Shotter, A.; Tanihata, I.; Thompson, I. J.; Unsworth, C.; Voss, P.; Wang, Z.

    2016-04-01

    The first measurement of the one-neutron transfer reaction 11Li(p,d)10Li performed using the IRIS facility at TRIUMF with a 5.7 A MeV11Li beam interacting with a solid H2 target is reported. The 10Li residue was populated strongly as a resonance peak with energy Er = 0.62 ± 0.04 MeV having a total width Γ = 0.33 ± 0.07 MeV. The angular distribution of this resonance is characterized by neutron occupying the 1p1/2 orbital. A DWBA analysis yields a spectroscopic factor of 0.67 ± 0.12 for p1/2 removal strength from the ground state of 11Li to the region of the peak.

  5. Recommended design correlations for S-65 beryllium

    International Nuclear Information System (INIS)

    The properties of tritium and helium behavior in irradiated beryllium are reviewed, along with the thermal-mechanical properties needed for ITER design analysis. Correlations are developed to describe the performance of beryllium in a fusion reactor environment. While this paper focuses on the use of beryllium as a plasma-facing component (PFC) material, the correlations presented here can also be used to describe the performance of beryllium as a neutron multiplier for a tritium breeding blanket. The performance properties for beryllium are subdivided into two categories: properties which do not change with irradiation damage to the bulk of the material; and properties which are degraded by neutron irradiation. The irradiation-independent properties described within are: thermal conductivity, specific heat capacity, thermal expansion, and elastic constants. Irradiation-dependent properties include: yield strength, ultimate tensile strength, plastic tangent modulus, uniform and total tensile elongation, thermal and irradiation-induced creep strength, He-induced swelling and tritium retention/release. The approach taken in developing properties correlations is to describe the behavior of dense, pressed S-65 beryllium -- the material chosen for ITER PFC application -- as a function of temperature. As there are essentially no data on the performance of porous and/or irradiated S-65 beryllium, the degradation of properties with as-fabricated porosity and irradiation are determined from the broad data base on S-200F, as well as other types and grades, and applied to S-65 beryllium by scaling factors. The resulting correlations can be used for Be produced by vacuum hot pressing (VHP) and cold-pressing (CP)/sintering(S)/hot-isostatic-pressing (HIP). The performance of plasma-sprayed beryllium is discussed but not quantified

  6. Recommended design correlations for S-65 beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Billone, M.C. [Argonne National Lab., IL (United States)

    1995-09-01

    The properties of tritium and helium behavior in irradiated beryllium are reviewed, along with the thermal-mechanical properties needed for ITER design analysis. Correlations are developed to describe the performance of beryllium in a fusion reactor environment. While this paper focuses on the use of beryllium as a plasma-facing component (PFC) material, the correlations presented here can also be used to describe the performance of beryllium as a neutron multiplier for a tritium breeding blanket. The performance properties for beryllium are subdivided into two categories: properties which do not change with irradiation damage to the bulk of the material; and properties which are degraded by neutron irradiation. The irradiation-independent properties described within are: thermal conductivity, specific heat capacity, thermal expansion, and elastic constants. Irradiation-dependent properties include: yield strength, ultimate tensile strength, plastic tangent modulus, uniform and total tensile elongation, thermal and irradiation-induced creep strength, He-induced swelling and tritium retention/release. The approach taken in developing properties correlations is to describe the behavior of dense, pressed S-65 beryllium -- the material chosen for ITER PFC application -- as a function of temperature. As there are essentially no data on the performance of porous and/or irradiated S-65 beryllium, the degradation of properties with as-fabricated porosity and irradiation are determined from the broad data base on S-200F, as well as other types and grades, and applied to S-65 beryllium by scaling factors. The resulting correlations can be used for Be produced by vacuum hot pressing (VHP) and cold-pressing (CP)/sintering(S)/hot-isostatic-pressing (HIP). The performance of plasma-sprayed beryllium is discussed but not quantified.

  7. Research of flaw assessment methods for beryllium reflector elements

    International Nuclear Information System (INIS)

    Reflector elements made from metal beryllium is widely used as neutron reflectors to increase neutron flux in test reactors. When beryllium reflector elements are irradiated by neutron, bending of reflector elements caused by swelling occurs, and beryllium reflector elements must be replaced in several years. In this report, literature search and investigation for non-destructive inspection of Beryllium and experiments for Preliminary inspection to establish post irradiation examination method for research of characteristics of metal beryllium under neutron irradiation were reported. (author)

  8. Preliminary proposal for a beryllium technology program for fusion applications

    International Nuclear Information System (INIS)

    The program was designed to provide the answers to the critical issues of beryllium technology needed in fusion blanket designs. The four tasks are as follows: (1) Beryllium property measurements needed for fusion data base. (2) Beryllium stress relaxation and creep measurements for lifetime modelling calculations. (3) Simplified recycle technique development for irradiated beryllium. (4) Beryllium neutron multiplier measurements using manganese bath absolute calibration techniques

  9. Study of the excited levels of 11C and 12C by the analysis of protons induced reactions

    International Nuclear Information System (INIS)

    The present work is a study of 11 and 12C excited states by reactions of non polarised protons on 10B and 11B. R-matrix analysis of the 10B excitation curves in the range Ep = 0 to 8 MeV was used to establish parameters of 41 levels in 11C. Isobaric multiplets of T = 1/2 and T = 3/2 states in A = 11 nuclei are deduced. Analysis of 11B excitation curves in the Ep = 0.5 to 7.4 MeV range led to parameter values of 60 levels in 12C. T = 1 states in A = 12 isobaric nuclei are discussed

  10. Iron-containing phases in commercial beryllium

    International Nuclear Information System (INIS)

    The effect of hot and cold rolling with subsequent heat treatment on the interrelation of iron-containing phases and texture in commercial beryllium is considered. Using the Moessbauer microscopy it has been established that iron impurities are present both in solid solution and in the composition of intermetallide AlFeBe4 the texture for iron solid solution in beryllium is determined. Beryllium quenching results in nearly complete disappearance of intermetallic phase and iron transfers into substitutional solid solution. Further cold rolling does not result in any phase transformation

  11. Leachability characteristics of beryllium in redmud waste and its stabilization in cement

    International Nuclear Information System (INIS)

    More than 70% of the beryl ore processed by the Beryllium Metal Plant at the BARC Vashi Complex ends up as redmud waste. The presence of significant quantities (0.4 to 0.8%) of beryllium in the redmud qualifies it as hazardous requiring safe handling, storage and disposal. The waste also contains 0.09% of water soluble fluoride. The various standard protocol of procedures were employed to estimate the leachability of beryllium from redmud for both short term and long term periods. Nearly 50% of beryllium present in redmud is leachable in water. We have tried the stabilization of redmud using portland cement. The proportion of redmud to cement was in the ratio of 1:1, 1:2 and 1:4. The blocks were cast, cured and used in the leachability experiments using standard protocols as above. The results of the TCLP test gave the levels of beryllium well below the standard limits in the TCLP extract of cement stabilized waste indicating the suitability of stabilization of redmud with cement whereas that of raw waste (redmud) are much higher than the prescribed limits. The total leach percent of beryllium in 1:2 block is 0.05% over period of 164 days whereas 1:1 and 1:4 gave a leach percent of 0.26 and 0.15% respectively. The DLT results indicate, diffusion controlled release of beryllium from the cement stabilized redmud blocks. The effective diffusion coefficient of beryllium obtained from the modelling study is 10 orders of magnitude less than the molecular diffusion coefficient of beryllium indicating the effectiveness of cement stabilization. From the detailed experiments performed, it is felt that 1:2 proportion of redmud and cement will be the best suited option for stabilization of redmud waste. The 1:1 proportion of redmud to cement mixture which could not be cast into compact cement blocks also exhibited very low leachability characteristics similar to 1:2 and 1:4 and can be be favourably considered for stabilization in case of space constraints at storage sites. The

  12. Development of Interatomic Potentials for Beryllium

    International Nuclear Information System (INIS)

    Full text of publication follows: To be able to benefit from fusion as a clean and safe power source, we need a comprehensive understanding of the dynamic region of a fusion reactor. Knowing the interplay between the fuel plasma and the reactor components, such as the first wall and the divertor, one can minimize the resulting degradation. The atom-level mechanisms behind the reactions, (e.g. erosion and redeposition) are, however, not accessible to experiments. Hence, computational methods, including molecular dynamics (MD) simulations, are needed. The interactions in a system of particles are within MD described by an interatomic potential. The study of reactor processes requires models for the mixed interaction between the first wall and divertor materials beryllium, carbon and tungsten, as well as for the interaction of these with hydrogen. The absence of proper models for the Be system motivated us to develop potentials for pure Be, Be-C, Be-W and Be-H. We present a Tersoff-like bond order potential for pure Be and the same formalism applied to Be-C and Be-H. The performance of the potentials is discussed and an outlook for the remaining potential is also given. (authors)

  13. On solid-phase interaction of beryllium oxide with mullite

    International Nuclear Information System (INIS)

    The interaction of beryllium oxide with mullite has been analyzed thermodynamically. It is shown that the reaction between the above substances must proceed with separation of chrysoberyl but without yielding phenacite, which is inconsistent with some data published. It has been found experimentally that the interaction of pure BeO and mullite is described by equation 3Al2Ox2SiO2+3BeO→3BeAl2O4+2SiO2

  14. Contribution to the study of 12C excited levels resulting from the reactions 11B (P/ α0) and 11B (p, α1)

    International Nuclear Information System (INIS)

    This work is made up of two parts. In the first part the differential cross-sections have been determined of the reactions 11B (p,α) from 130 to 500 keV thus confirming, at the 163 keV resonance, the (2+) characteristics of the 16.11 MeV level of 12C. Furthermore, the experimental results in the neighbourhood of the 163 keV resonance can be explained by the interference of the 12C levels: 2+ at 16.11 MeV and 1- at 17.23 MeV for the α0, 2+ at 16.11 MeV and 2- at 16.58 MeV for the α1. In the second part the (α-8Be) disintegration process of 12C has been studied in the neighbourhood of the 16.11 MeV level. It is shown that, if the (α-8Be) mode of disintegration is preponderant outside the Ep = 163 keV resonance, it is also preponderant at this same resonance; a direct disintegration of the 12C to 3 α, with an approximate magnitude of 40 per cent has however not been excluded. (author)

  15. Chronic Beryllium Disease Prevention Program Report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S

    2012-03-29

    This document describes how Lawrence Livermore National Laboratory (LLNL) meets the requirements and management practices of federal regulation 10 CFR 850, 'Chronic Beryllium Disease Prevention Program (CBDPP).' This revision of the LLNL CBDPP incorporates clarification and editorial changes based on lessons learned from employee discussions, observations and reviews of Department of Energy (DOE) Complex and commercial industry beryllium (Be) safety programs. The information is used to strengthen beryllium safety practices at LLNL, particularly in the areas of: (1) Management of small parts and components; and (2) Communication of program status to employees. Future changes to LLNL beryllium activities and on-going operating experience will be incorporated into the program as described in Section S, 'Performance Feedback.'

  16. Structural Basis of Chronic Beryllium Disease: Linking Allergic Hypersensitivity and Autoimmunity

    OpenAIRE

    Clayton, Gina M.; Wang, Yang; Crawford, Frances; Novikov, Andrey; Wimberly, Brian T.; Kieft, Jeffrey S.; Falta, Michael T.; Bowerman, Natalie A.; Marrack, Philippa; Fontenot, Andrew P.; Dai, Shaodong; John W Kappler

    2014-01-01

    T cell-mediated hypersensitivity to metal cations is common in humans. How the T cell antigen receptor (TCR) recognizes these cations bound to a major histocompatibility complex (MHC) protein and self-peptide is unknown. Individuals carrying the MHCII allele, HLA-DP2, are at risk for chronic beryllium disease (CBD), a debilitating inflammatory lung condition caused by the reaction of CD4 T cells to inhaled beryllium. We show here that the T cell ligand is created when a Be2+ cation becomes bu...

  17. Lithium-Beryllium-Boron : Origin and Evolution

    OpenAIRE

    Vangioni-Flam, Elisabeth; Casse, Michel; Audouze, Jean

    1999-01-01

    The origin and evolution of Lithium-Beryllium-Boron is a crossing point between different astrophysical fields : optical and gamma spectroscopy, non thermal nucleosynthesis, Big Bang and stellar nucleosynthesis and finally galactic evolution. We describe the production and the evolution of Lithium-Beryllium-Boron from Big Bang up to now through the interaction of the Standard Galactic Cosmic Rays with the interstellar medium, supernova neutrino spallation and a low energy component related to...

  18. Beryllium concentration in pharyngeal tonsils in children

    Directory of Open Access Journals (Sweden)

    Ewa Nogaj

    2014-06-01

    Full Text Available Power plant dust is believed to be the main source of the increased presence of the element beryllium in the environment which has been detected in the atmospheric air, surface waters, groundwater, soil, food, and cigarette smoke. In humans, beryllium absorption occurs mainly via the respiratory system. The pharyngeal tonsils are located on the roof of the nasopharynx and are in direct contact with dust particles in inhaled air. As a result, the concentration levels of beryllium in the pharyngeal tonsils are likely to be a good indicator of concentration levels in the air. The presented study had two primary aims: to investigate the beryllium concentration in pharyngeal tonsils in children living in southern Poland, and the appropriate reference range for this element in children’s pharyngeal tonsils. Pharyngeal tonsils were extracted from a total of 379 children (age 2–17 years, mean 6.2 ± 2.7 years living in southern Poland. Tonsil samples were mineralized in a closed cycle in a pressure mineralizer PDS 6, using 65% spectrally pure nitric acid. Beryllium concentration was determined using the ICP-AES method with a Perkin Elmer Optima 5300DVTM. The software Statistica v. 9 was used for the statistical analysis. It was found that girls had a significantly greater beryllium concentration in their pharyngeal tonsils than boys. Beryllium concentration varies greatly, mostly according to the place of residence. Based on the study results, the reference value for beryllium in pharyngeal tonsils of children is recommended to be determined at 0.02–0.04 µg/g.

  19. Tritium release from neutron irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik

    1998-01-01

    One of the most important open issues related to beryllium for fusion applications refers to the kinetics of the tritium release as a function of neutron fluence and temperature. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating the beryllium response under neutron irradiation. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from the above mentioned irradiation experiments, trying to elucidate the tritium release controlling processes. In agreement with previous studies it has been found that release starts at about 500-550degC and achieves a maximum at about 700-750degC. The observed release at about 500-550degC is probably due to tritium escaping from chemical traps, while the maximum release at about 700-750degC is due to tritium escaping from physical traps. The consequences of a direct contact between beryllium and ceramics during irradiation, causing tritium implanting in a surface layer of beryllium up to a depth of about 40 mm and leading to an additional inventory which is usually several times larger than the neutron-produced one, are also presented and the effects on the tritium release are discussed. (author)

  20. Solid state bonding of beryllium-copper for an ITER first wall application

    International Nuclear Information System (INIS)

    Several different joint assemblies were evaluated in support of a manufacturing technology for diffusion bonding a beryllium armor tile to a copper alloy heat sink for fusion reactor applications. Because beryllium reacts with all but a few elements to form intermetallic compounds, this study considered several different surface treatments as a means of both inhibiting these reactions and promoting a good diffusion bond between the two substrates. All diffusion bonded assemblies used aluminum or an aluminum-beryllium composite (AlBeMet-150) as the interfacial material in contact with beryllium. In most cases, explosive bonding was utilized as a technique for joining the copper alloy heat sink to an aluminum or AlBeMet-150 substrate, which was subsequently diffusion bonded to an aluminum coated beryllium tile. In this approach, a 250 μm thick titanium foil was used as a diffusion barrier between the copper and aluminum to prevent the formation of Cu-Al intermetallic phases. In all cases, a hot isostatic pressing (HIP) furnace was used in conjunction with canned assemblies in order to minimize oxidation and apply sufficient pressure on the assembly for excellent metal-to-metal contact and subsequent bonding. Several different processing schedules were evaluated during the course of this study; bonded assemblies were produced that failed outside the bond area indicating a 100% joint efficiency. (author)

  1. Solid state bonding of beryllium-copper for an ITER first wall application

    International Nuclear Information System (INIS)

    Several different joint assemblies were evaluated in support of a manufacturing technology for diffusion bonding a beryllium armor tile to a copper alloy heat sink for fusion reactor applications. Because beryllium reacts with all but a few elements to form intermetallic compounds, this study considered several different surface treatments as a means of both inhibiting these reactions and promoting a good diffusion bond between the two substrates. A diffusion bonded assemblies used aluminum or an aluminum-beryllium composite (AlBeMet-150) as the interfacial material in contact with beryllium. In most cases, explosive bonding was utilized as a technique for joining the copper alloy heat sink to an aluminum or AlBeMet-150 substrate, which was subsequently diffusion bonded to an aluminum coated beryllium tile. In this approach, a 250 microm thick titanium foil was used as a diffusion barrier between the copper and aluminum to prevent the formation of Cu-Al intermetallic phases. In all cases, a hot isostatic pressing (HIP) furnace was used in conjunction with canned assemblies in order to minimize oxidation and apply sufficient pressure on the assembly for excellent metal-to-metal contact and subsequent bonding. Several different processing schedules were evaluated during the course of this study; bonded assemblies were produced that failed outside the bond area indicating a 100% joint efficiency

  2. Removal of Beryllium Material during Decommissioning of a Slowpoke Reactor, Toronto, Canada

    International Nuclear Information System (INIS)

    The Slowpoke (acronym for Safe LOW-POwer Kritical Experiment) is a low energy, tank-in-pool type nuclear research reactor designed by the Atomic Energy of Canada Limited in the late 1960s. The fuel cage is surrounded by a beryllium assembly at the bottom of a water pool about 6 m deep. The beryllium reflects neutrons back into the core. Basically, the reactor is a subcritical mass of fuel, which the surrounding beryllium makes critical. The rate of reaction is controlled by inserting a neutron absorbing cadmium rod. Slowpokes have a maximum power of 100 kW and normally operate at about 20 kW. The University of Toronto SLOWPOKE-2 Reactor research services ended in December 1998, and the reactor was finally defuelled in June 2000. On 10 November 2000, the Canadian Nuclear Safety Commission (CNSC) issued the decommissioning licence to the University of Toronto for its SLOWPOKE-2 Nuclear Reactor Facility. The reactor decommissioning was completed in January 2001. The beryllium material was to have been shipped under the operating licence, but actually it was shipped under the decommissioning licence. The CNSC revoked the decommissioning licence for the University of Toronto SLOWPOKE-2 Reactor Facility on 24 February 2012, and the site was returned to the university for unrestricted site use. The following is a description of the incident involving the beryllium material management

  3. Solid state bonding of beryllium-copper for an ITER first wall application

    Energy Technology Data Exchange (ETDEWEB)

    Odegard, B.C. Jr.; Cadden, C.H. [Sandia National Labs., Livermore, CA (United States)

    1998-01-01

    Several different joint assemblies were evaluated in support of a manufacturing technology for diffusion bonding a beryllium armor tile to a copper alloy heat sink for fusion reactor applications. Because beryllium reacts with all but a few elements to form intermetallic compounds, this study considered several different surface treatments as a means of both inhibiting these reactions and promoting a good diffusion bond between the two substrates. All diffusion bonded assemblies used aluminum or an aluminum-beryllium composite (AlBeMet-150) as the interfacial material in contact with beryllium. In most cases, explosive bonding was utilized as a technique for joining the copper alloy heat sink to an aluminum or AlBeMet-150 substrate, which was subsequently diffusion bonded to an aluminum coated beryllium tile. In this approach, a 250 {mu}m thick titanium foil was used as a diffusion barrier between the copper and aluminum to prevent the formation of Cu-Al intermetallic phases. In all cases, a hot isostatic pressing (HIP) furnace was used in conjunction with canned assemblies in order to minimize oxidation and apply sufficient pressure on the assembly for excellent metal-to-metal contact and subsequent bonding. Several different processing schedules were evaluated during the course of this study; bonded assemblies were produced that failed outside the bond area indicating a 100% joint efficiency. (author)

  4. One-nucleon transfer reactions induced by secondary beam of {sup 11}Be: study of the nuclear structure of the exotic nuclei {sup 11}Be and {sup 10}Li; Reactions de transfert d'un nucleon induites par un faisceau secondaire de {sup 11}Be: etude de la structure des noyaux exotiques {sup 11}Be et {sup 10}Li

    Energy Technology Data Exchange (ETDEWEB)

    Pita, S

    2000-09-01

    The structure of the neutron rich light nuclei {sup 11}Be and {sup 10}Li has been investigated by means of one nucleon transfer reactions. The experiments have been carried out at GANIL in inverse kinematics using {sup 11}Be secondary beams. The {sup 11}Be(p,d){sup 10}Be reaction bas been studied at 35.3 MeV/u. The {sup 10}Be ejectiles were analyzed by the spectrometer SPEG, and coincident deuterons were detected in the position sensitive silicon detector CHARISSA. Transfer cross sections to 0{sup +}{sub 1} and 2{sup +}{sub 1}, states in {sup 10}Be were measured up to {theta}{sub CM} = 16 deg. and compared to DWBA and CRC predictions. The effects of neutron-cure couplings on reaction form factors have been studied by solving coupled equations in the framework of a vibrational model. It is shown that the rate of core excitation {sup 10}Be{sub 2+} in the {sup 11}Be{sub gs} wave function is overestimated by a standard analysis with form factors given by the usual Separation Energy prescription. The former model predicts a rate of core excitation of 16% and leads to theoretical cross sections which are in good agreement with the experimental data. The aim of the {sup 11}Be(d,{sup 3}He){sup 10}Li experiment, realized at 37 MeV/u, was to measure the distribution of the 2s neutron strength in the unbound nucleus {sup 10}Li. The energy spectrum was deduced from the {sup 3}He energy and angle measured by the silicon strip detector array MUST. An asymmetric peak is clearly observed near the threshold, with a maximum at -S{sub n} = 130 keV. This constitutes a direct proof of the inversion of 2s and 1p{sub 1/2} shells in {sup 10}Li, which was until now a controversial question in spite of many experimental efforts. On the other band the analysis of the {sup 11}Be(d,t){sup 10}Be reaction studied in the same experiment confirms the results obtained in the {sup 11}Be(p,d){sup 10}Be reaction concerning the {sup 11}Be{sub gs} structure. This work shows the interest and feasibility

  5. H-3 and Li-6 poisoning of the Maria reactor beryllium matrix

    International Nuclear Information System (INIS)

    This report discusses methods used to evaluate Li-6 and He-3 poison concentrations, initiated by Be-9(n, α) reaction in the beryllium blocks of the Maria reactor. The results based on ENDF/B-VI neutron cross sections, 3D diffusion neutron fluxes, and solutions to the differential equations which describe the time-dependent poison concentrations as function of reactor operation and shutdown periods. MCNP Monte Carlo calculations were used to verify calculated poison levels for observed critical configurations. Previous evaluations used somewhat less refined methods based on asymptotic solutions for the poison concentrations. It was found that Li-6 and He-3 in the beryllium blocks limit the available excess reactivities and alter flux and power distributions. Based on analyses of critical cores, it was determined that poison concentrations need be evaluated for an in-core region and for an excore region and not for each beryllium block. (author)

  6. Detection of beryllium treatment of natural sapphires by NRA

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, P.C., E-mail: carolina.gutierrez@uam.e [Centro de Micro-Analisis de Materiales (CMAM), Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain); Ynsa, M.-D.; Climent-Font, A. [Centro de Micro-Analisis de Materiales (CMAM), Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain); Dpto. Fisica Aplicada C-12, Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain); Calligaro, T. [Centre de Recherche et de Restauration des musees de France C2RMF, CNRS-UMR171, 14 quai Francois Mitterrand, 75001 Paris (France)

    2010-06-15

    Since the 1990's, artificial treatment of natural sapphires (Al{sub 2}O{sub 3} crystals coloured by impurities) by diffusion of beryllium at high temperature has become a growing practice. This process permits to enhance the colour of these gemstones, and thus to increase their value. Detection of such a treatment - diffusion of tens of {mu}g/g of beryllium in Al{sub 2}O{sub 3} crystals - is usually achieved using high sensitivity techniques like laser-ablation inductively coupled plasma mass spectrometry (LA-ICP/MS) or laser-induced breakdown spectrometry (LIBS) which are unfortunately micro-destructive (leaving 50-100-{mu}m diameter craters on the gems). The simple and non-destructive alternative method proposed in this work is based on the nuclear reaction {sup 9}Be({alpha}, n{gamma}){sup 12}C with an external helium ion beam impinging on the gem directly placed in air. The 4439 keV prompt {gamma}-ray tagging Be atoms are detected with a high efficiency bismuth germanate scintillator. Beam dose is monitored using the 2235 keV prompt {gamma}-ray produced during irradiation by the aluminium of the sapphire matrix through the {sup 27}Al({alpha}, p{gamma}){sup 30}Si nuclear reaction. The method is tested on a series of Be-treated sapphires previously analyzed by LA-ICP/MS to determine the optimal conditions to obtain a peak to background appropriate to reach the required {mu}g/g sensitivity. Using a 2.8-MeV external He beam and a beam dose of 200 {mu}C, beryllium concentrations from 5 to 16 {mu}g/g have been measured in the samples, with a detection limit of 1 {mu}g/g.

  7. Detection of beryllium treatment of natural sapphires by NRA

    Science.gov (United States)

    Gutiérrez, P. C.; Ynsa, M.-D.; Climent-Font, A.; Calligaro, T.

    2010-06-01

    Since the 1990's, artificial treatment of natural sapphires (Al 2O 3 crystals coloured by impurities) by diffusion of beryllium at high temperature has become a growing practice. This process permits to enhance the colour of these gemstones, and thus to increase their value. Detection of such a treatment - diffusion of tens of μg/g of beryllium in Al 2O 3 crystals - is usually achieved using high sensitivity techniques like laser-ablation inductively coupled plasma mass spectrometry (LA-ICP/MS) or laser-induced breakdown spectrometry (LIBS) which are unfortunately micro-destructive (leaving 50-100-μm diameter craters on the gems). The simple and non-destructive alternative method proposed in this work is based on the nuclear reaction 9Be(α, nγ) 12C with an external helium ion beam impinging on the gem directly placed in air. The 4439 keV prompt γ-ray tagging Be atoms are detected with a high efficiency bismuth germanate scintillator. Beam dose is monitored using the 2235 keV prompt γ-ray produced during irradiation by the aluminium of the sapphire matrix through the 27Al(α, pγ) 30Si nuclear reaction. The method is tested on a series of Be-treated sapphires previously analyzed by LA-ICP/MS to determine the optimal conditions to obtain a peak to background appropriate to reach the required μg/g sensitivity. Using a 2.8-MeV external He beam and a beam dose of 200 μC, beryllium concentrations from 5 to 16 μg/g have been measured in the samples, with a detection limit of 1 μg/g.

  8. Preparation, characterization and thermal behaviour study of double selenates of lanthanides, yttrium and beryllium

    International Nuclear Information System (INIS)

    The lanthanides (III) and yttrium (III) double selenates were studied using common analytical methods, atomic absorption, X-ray diffraction infra-red absorption, thermogravimetry and differential thermal analysis. These compounds were prepared from the mixture of lanthanides (III) and yttrium (III) selenates aqueous solution and basic beryllium selenates aqueous solution, obeying equimolar relation (1:1) to the cation

  9. Sanitary-hygienic and ecological aspects of beryllium production

    Energy Technology Data Exchange (ETDEWEB)

    Dvinskykh, E.M.; Savchuk, V.V.; Sidorov, V.L.; Slobodin, D.B.; Tuzov, Y.V. [Ulba Metallurgical Plant, Ust-Kamenogorsk (Kazakhstan)

    1998-01-01

    The Report describes An organization of sanitary-hygienic and ecological control of beryllium production at Ulba metallurgical plant. It involves: (1) the consideration of main methods for protection of beryllium production personnel from unhealthy effect of beryllium, (2) main kinds of filters, used in gas purification systems at different process areas, (3) data on beryllium monitoring in water, soil, on equipment. This Report also outlines problems connected with designing devices for a rapid analysis of beryllium in air as well as problems of beryllium production on ecological situation in the town. (author)

  10. Long-term follow-up of beryllium sensitized workers from a single employer

    Directory of Open Access Journals (Sweden)

    Curtis Anne M

    2010-01-01

    Full Text Available Abstract Background Up to 12% of beryllium-exposed American workers would test positive on beryllium lymphocyte proliferation test (BeLPT screening, but the implications of sensitization remain uncertain. Methods Seventy two current and former employees of a beryllium manufacturer, including 22 with pathologic changes of chronic beryllium disease (CBD, and 50 without, with a confirmed positive test were followed-up for 7.4 +/-3.1 years. Results Beyond predicted effects of aging, flow rates and lung volumes changed little from baseline, while DLCO dropped 17.4% of predicted on average. Despite this group decline, only 8 subjects (11.1% demonstrated physiologic or radiologic abnormalities typical of CBD. Other than baseline status, no clinical or laboratory feature distinguished those who clinically manifested CBD at follow-up from those who did not. Conclusions The clinical outlook remains favorable for beryllium-sensitized individuals over the first 5-12 years. However, declines in DLCO may presage further and more serious clinical manifestations in the future. These conclusions are tempered by the possibility of selection bias and other study limitations.

  11. Summary of Surface Swipe Sampling for Beryllium on Lead Bricks and Shielding

    International Nuclear Information System (INIS)

    Approximately 25,000 lbs of lead bricks at Site 300 were assessed by the Site 300 Industrial Hygienis tand Health Physicist for potential contamination of beryllium and radiation for reuse. These lead bricks and shielding had been used as shielding material during explosives tests that included beryllium and depleted uranium. Based on surface swipe sampling that was performed between July 26 and October 11, 2010, specifically for beryllium, the use of a spray encapsulant was found to be an effective means to limit removable surface contamination to levels below the DOE release limit for beryllium, which is 0.2 mcg/100 cm2. All the surface swipe sampling data for beryllium and a timeline of when the samples were collected (and a brief description) are presented in this report. On December 15, 2010, the lead bricks and shielding were surveyed with an ion chamber and indicated dose rates less than 0.05 mrem per hour on contact. This represents a dose rate consistent with natural background. An additional suevey was performed on February 8, 2011, using a GM survey instrument to estimate total activity on the lead bricks and shielding, confirming safe levels of radioactivity. The vendor is licensed to possess and work with radioactive material.

  12. Photoredox-Catalyzed Tandem Insertion/Cyclization Reactions of Difluoromethyl and 1,1-Difluoroalkyl Radicals with Biphenyl Isocyanides.

    Science.gov (United States)

    Zhang, Zuxiao; Tang, Xiaojun; Dolbier, William R

    2015-09-18

    Using visible-light photoredox conditions, difluoromethylation and 1,1-difluoroalkylation of biphenyl isocyanides have allowed the synthesis of a series of 6-(difluoromethyl)- and 6-(1,1-difluoroalkyl)phenanthridines via tandem addition/cyclization/oxidation processes. The reactions are carried out in wet dioxane at room temperature using fac-Ir(ppy)3 as catalyst to form a large variety of substituted phenanthridine products in good to excellent yield. PMID:26336815

  13. Study of induced reactions by a secondary beam of 11Be in Be, Ti and Au targets

    International Nuclear Information System (INIS)

    In the last decade, new phenomena arised from nuclear reaction studies of neutron-rich light nuclei produced by projectile fragmentation. In this work, first we will recall briefly some aspects of these studies, in particular the two-neutron halo for nuclei whose binding energy of the two last neutrons is low. Secondly, we will describe the experiment which aims to study 11 Be reactions on Be, Ti and Be targets. The results of this experiment show the presence of a one-neutron halo, corresponding to a high dissociation cross-section for the three targets. We will show that three mechanisms, Coulomb dissociation for heavy targets, diffraction-and absorption-dissociation for light targets, account satisfactorily for reactions leading to 10 Be

  14. Reactions of 1,1-diphenyl-2-picryl-hydrazyl with NO2, Cl2 and F2

    International Nuclear Information System (INIS)

    The reactions of 1,1-Diphenyl-2-picryl-hidrazyl (DPPH) with Cl2, NO2 and F2 were studied. In the para-phenyl position substituted diphenylpicrylhydrazines were formed. Besides this, the reaction of halogens led to products which were nitro-substituted in the para-phenyl position. Thus, it was shown that the reactions of halogens and halogen radicals with DPPH include a substitution at the picryl group of DPPH and its derivatives under liberation of NO2. By ESR in situ spectroscopy and computational analysis of spectra, nitro-, dinitro-, fluoro- and difluoro-diphenylpicrylhydrazyls were identified as transient intermediates. In the formation of these species nitrogen dioxide and fluorine act as oxidants for the corresponding substituted hydrazines. (Author)

  15. Beryllium Abundances in Solar Mass Stars

    Science.gov (United States)

    Krugler, J. A.; Boesgaard, A. M.

    2008-08-01

    Light element abundance analysis allows for a deeper understanding of the chemical composition of a star beneath its surface. Beryllium provides a probe down to 3.5×106 K, where it fuses with protons. In this study, Be abundances were determined for 52 F and G dwarfs selected from a sample of local thin disc stars. These stars were selected by mass to range from 0.9 to 1.1 M⊙. They have effective temperatures from 5600 to 6400 K, and their metallicities [Fe/H]=-0.65 to +0.11. The data were taken with the Keck HIRES instrument and the Gecko spectrograph on the Canada France Hawaii Telescope. The abundances were calculated via spectral synthesis and were analyzed to investigate the Be abundance as a function of age, temperature, metallicity, and its relation to the lithium abundance for this narrow mass range. Be is found to decrease linearly with metallicity down to [Fe/H]˜-4.0 with slope 0.86 ± 0.02. The relation of the Be abundance to effective temperature is dependent upon metallicity, but when metallicity effects are taken into account, there is a spread ˜1.2 dex. We find a 1.5 dex spread in A(Be) when plotted against age, with the largest spread occurring from 6-8 Gyr. The relation with Li is found to be linear with slope 0.36 ± 0.06 for the temperature regime of 5900-6300 K.

  16. Dissociation of deuteron, 6He and 11Be from Coulomb dissociation reaction cross-section

    Indian Academy of Sciences (India)

    Ramendra Nath Majumdar

    2008-05-01

    The fragmentation of deuteron, 6He and 11Be have been studied during interaction with the 208Pb nucleus at various projectile energies. The Coulomb dissociation cross-sections and the momentum distribution of the break-up fragments have been analysed within the framework of the direct fragmentation model. The post-acceleration effect of deuteron during break-up and the halo structures of both the 6He and 11Be have been investigated.

  17. Beryllium colorimetric detection for high speed monitoring of laboratory environments.

    Science.gov (United States)

    Taylor, Tammy P; Sauer, Nancy N

    2002-08-01

    The health consequences of beryllium (Be2+) exposure can be severe. Beryllium is responsible for a debilitating and potentially fatal lung disease, chronic beryllium disease (CBD) resulting from inhalation of beryllium particles. The US Code of Federal Register (CFR), 10 CFR 850, has established a limit of 0.2 microg beryllium/100 cm(2) as the maximum amount of beryllium allowable on surfaces to be released from beryllium work areas in Department of Energy (DOE) facilities. The analytical technique described herein reduces the time and cost of detecting beryllium on laboratory working surfaces substantially. The technique provides a positive colorimetric response to the presence of beryllium on a 30.5 cm x 30.5 cm (1 ft(2)) surface at a minimum detection of 0.2 microg/100 cm(2). The method has been validated to provide positive results for beryllium in the presence of excess iron, calcium, magnesium, copper, nickel, chromium and lead at concentrations 100 times that of beryllium and aluminum and uranium (UO2(2+)) at lesser concentrations. The colorimetric detection technique has also been validated to effectively detect solid forms of beryllium including Be(OH)2, BeCl2, BeSO4, beryllium metal and BeO. PMID:12137989

  18. Double-step processes in the 12C(p,d)11C reaction at 45 MeV

    International Nuclear Information System (INIS)

    12C(p,d)11C pick-up reaction was performed with a 45 MeV proton beam. A 130keV energy resolution was obtained and angular distributions of nine of the ten first levels of 11C have been extracted within a large angular range. Assuming only neutron direct transfert, the strong relative excitation of high spin levels cannot be reproduced by a DWBA analysis. The double-step process assumption seems to be verified by a systematical analysis of the (p,d) reaction mechanisms. This analysis is done in the coupled-channel formalism for the five first negative parity states of 11C. The 3/2- ground state is essentially populated by the direct transfer of a Psub(3/2) neutron. The contribution of a double-step process, via the 2+ inelastic excitation of 12C, is important for the four other states. A mechanism which assumes a deuteron inelastic scattering on the 11C final nucleus after the neutron transfer cannot be neglected and improves the fits when it is taken into account

  19. Field-controlled electron transfer and reaction kinetics of the biological catalytic system of microperoxidase-11 and hydrogen peroxide

    Directory of Open Access Journals (Sweden)

    Yongki Choi

    2011-12-01

    Full Text Available Controlled reaction kinetics of the bio-catalytic system of microperoxidase-11 and hydrogen peroxide has been achieved using an electrostatic technique. The technique allowed independent control of 1 the thermodynamics of the system using electrochemical setup and 2 the quantum mechanical tunneling at the interface between microperoxidase-11 and the working electrode by applying a gating voltage to the electrode. The cathodic currents of electrodes immobilized with microperoxidase-11 showed a dependence on the gating voltage in the presence of hydrogen peroxide, indicating a controllable reduction reaction. The measured kinetic parameters of the bio-catalytic reduction showed nonlinear dependences on the gating voltage as the result of modified interfacial electron tunnel due to the field induced at the microperoxidase-11-electrode interface. Our results indicate that the kinetics of the reduction of hydrogen peroxide can be controlled by a gating voltage and illustrate the operation of a field-effect bio-catalytic transistor, whose current-generating mechanism is the conversion of hydrogen peroxide to water with the current being controlled by the gating voltage.

  20. First direct measurement of the 11C (α ,p )14N stellar reaction by an extended thick-target method

    Science.gov (United States)

    Hayakawa, S.; Kubono, S.; Kahl, D.; Yamaguchi, H.; Binh, D. N.; Hashimoto, T.; Wakabayashi, Y.; He, J. J.; Iwasa, N.; Kato, S.; Komatsubara, T.; Kwon, Y. K.; Teranishi, T.

    2016-06-01

    The 11C(α,p ) 14N reaction is an important α -induced reaction competing with β -limited hydrogen-burning processes in high-temperature explosive stars. We directly measured its reaction cross sections both for the ground-state transition (α ,p0) and the excited-state transitions (α ,p1) and (α ,p2) at relevant stellar energies 1.3-4.5 MeV by an extended thick-target method featuring time of flight for the first time. We revised the reaction rate by numerical integration including the (α ,p1) and (α ,p2) contributions and also low-lying resonances of (α ,p0) using both the present and the previous experimental data which were totally neglected in the previous compilation works. The present total reaction rate lies between the previous (α ,p0) rate and the total rate of the Hauser-Feshbach statistical model calculation, which is consistent with the relevant explosive hydrogen-burning scenarios such as the ν p process.

  1. Structure of the excited states of {sup 11}Be reached through the reaction d({sup 10}Be,p){sup 11}Be; Structure des etats du {sup 11}Be excites par la reaction d({sup 10}Be,p){sup 11}Be

    Energy Technology Data Exchange (ETDEWEB)

    Delaunay, F

    2003-10-01

    The one-neutron transfer reaction d({sup 10}Be,p){sup 11}Be has been studied at 32 A.MeV at GANIL with a {sup 10}Be secondary beam. Protons were detected by the silicon strip array MUST. The ground state and excited states of {sup 11}Be at 0.32, 1.78 and 3.41 MeV were populated, demonstrating the feasibility of transfer reactions induced by radioactive beams leading to bound and unbound states. A DWBA (distorted wave born approximation) analysis indicates for the 3.41 MeV state spin and parity 3/2{sup +} or 5/2{sup +} and a spectroscopic factor of 0.18 or 0.11, respectively. A broad structure centered at 10 MeV is also observed and corresponds to transfer to the 1d sub-shells. If one assumes that only the 1d3/2 orbital contributes to this structure, the splitting of the 1d neutron states in {sup 11}Be is estimated to be 6.3 MeV. Using a 2-particle-RPA (random phase approximation) model, we have shown that neutron-neutron correlations play an important role in the inversion between the 2s1/2 and 1p1/2 neutron states in {sup 11}Be. (author)

  2. Beryllium. Health hazards and their control. Pt. 2

    International Nuclear Information System (INIS)

    In this work (continuation of 'Beryllium' series) health hazards, toxic effects, limits of permissible atmospheric contamination and safe exposure to beryllium are described. Guidelines to the design, control operations and hygienic precautions of the working facilities are given. (Author)

  3. The theoretical analysis of the reaction N14 (p,) C11 at E 20.5 45 MeV

    International Nuclear Information System (INIS)

    The experimental angular distributions of the reaction N14 (p, )C11 leading to the ground and first three excited states in C11 at incident energies ranged from 20.5 to 45 MeV are examined and compared together. The examination and comparison processes show that, most of the angular distributions of the present reaction have the characteristics of the direct nuclear reactions. This leads to use the semi-microscopic DWBA-theory and the Kurath-Millener's SU(3) spectroscopic factor amplitudes for the transferred triton in the theoretical analysis of the lower four C11-states g. s. (3/2- ;1/2); 1.99 (1/2- ;1/2); 4.319 (5/2- ;1/2) and 4..804 MeV (3/2- ;1/2). The analysis process shows excellent fitting between the experimental angular distributions and the DWBA-theory's predictions for the four states. Coincidences are obtained between the theoretical spectroscopic factors (S) and both of experimental- and theoretical forward integrated cross-section values at Ep = 41 MeV. The values and orders of experimental excitation energies for the four investigated C11-states are also in good agreement with the corresponding theoretical values and their orders. Such coincidences between theoretical- and experimental data can be considered as a test and it is a success for the Kurath-Millener's spectroscopic-factors and also for the Cohen-Kurath wave-functions itself and their accuracy and model of calculations

  4. Mechanical performance of irradiated beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Scaffidi-Argentina, F.; Dalle-Donne, M.; Werle, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reaktortechnik

    1998-01-01

    For the Helium Cooled Pebble Bed (HCPB) Blanket, which is one of the two reference concepts studied within the European Fusion Technology Programme, the neutron multiplier consists of a mixed bed of about 2 and 0.1-0.2 mm diameter beryllium pebbles. Beryllium has no structural function in the blanket, however microstructural and mechanical properties are important, as they might influence the material behavior under neutron irradiation. The EXOTIC-7 as well as the `Beryllium` experiments carried out in the HFR reactor in Petten are considered as the most detailed and significant tests for investigating it. This paper reviews the present status of beryllium post-irradiation examinations performed at the Forschungszentrum Karlsruhe with samples from these irradiation experiments, emphasizing the effects of irradiation of essential material properties and trying to elucidate the processes controlling the property changes. The microstructure, the porosity distribution, the impurity content, the behavior under compression loads and the compatibility of the beryllium pebbles with lithium orthosilicate (Li{sub 4}SiO{sub 4}) during the in-pile irradiation are presented and critically discussed. Qualitative information on ductility and creep obtained by hardness-type measurements are also supplied. (author)

  5. Analysis of the {sup 11}B({sup 7}Li, {sup 7}Be){sup 11}Be reaction at 57 MeV in a microscopic approach

    Energy Technology Data Exchange (ETDEWEB)

    Cappuzzello, F. E-mail: cappuzzello@lns.infn.it; Lenske, H.; Cunsolo, A.; Beaumel, D.; Fortier, S.; Foti, A.; Lazzaro, A.; Nociforo, C.; Orrigo, S.E.A.; Winfield, J.S

    2004-07-12

    The {sup 11}B({sup 7}Li, {sup 7}Be){sup 11}Be charge exchange reaction has been studied at an incident energy of 57 MeV. Spectra were measured at forward angles, {theta}{sub cm}{<=}35 degrees. The good energy resolution ({approx}50 keV) allowed the identification of transitions both to the {sup 7}Be (3/2{sup -}, gs) and {sup 7}Be(1/2{sup -}, 429 keV) exit channels and hence the direct measurement of the ratio of the respective cross sections and angular distributions. Besides the bound ground and first excited state of {sup 11}Be several low lying excitations just above the neutron threshold are observed. A structure seen at E{sup *}=9.4 MeV with FWHM {approx}7 MeV is compatible with the spin dipole resonance (SDR). The data are analysed in a many-body approach. For the projectile transitions shell model results are used. In order to account properly for the special features of the weakly bound {sup 11}Be system the target transitions are described microscopically by Hartree-Fock-Bogoliubov (HFB) and quasi-particle random phase approximation (QRPA) theory. The HFB ground state densities and the QRPA transition densities, respectively, are used in folding calculations for the optical potentials and transition form factors. Spectra and {beta}-decay transitions strengths are reasonably well described. The measured cross section are well reproduced by one-step direct charge exchange distorted wave born approximation (DWBA) calculations. A dominance of unnatural parity transitions is found. This is explained in terms of the spin transfer behaviour of the nucleon-nucleon isovector interaction at low bombarding energy.

  6. Tetra- and mono-organotin reagents in palladium-mediated cross-coupling reactions for the labeling with carbon-11 of PET tracers

    Energy Technology Data Exchange (ETDEWEB)

    Bourdier, T.; Huiban, M.; Sobrio, F.; Perrio, C.; Barre, E. [Groupe de Dev Methodol en Tomographie par Emission de Positons, UMR CEA 2E, Universite deCaen, Centre Cyceron, F-14070 Caen Cedex (France); Fouquet, A.; Huet, A. [Laboratoire de Chimie Organique et Organometallique, UMR CNRS 3802, Univ Bordeaux I, F-33405 Talence Cedex (France)

    2008-07-01

    The palladium-catalyzed cross-coupling reactions between a (trimethylstannyl)arene and [{sup 11}C]methyl iodide (Stille reaction) or between an aryl halide and a [{sup 11}C]monomethyltin reagent issued from Lappert's stannylene, were developed for the synthesis of polyfunctional [{sup 11}C]methyl quinolines and quinoline-imides as potential tracers for positron emission tomography (PET). (authors)

  7. Three nuclei fragmentation in light-ion reactions at 11 MeV/u bombarding energy

    International Nuclear Information System (INIS)

    The reactions 32S+58Ni and 35Cl+58Ni were studied at 355 MeV respectively 395 MeV beam energy. The experimental setup employed two large area ionization chambers for the coincident detection of two heavy fragments and a light particle detector system consisting of twenty independent scintillation counters. In the off-line analysis the nuclear charges Z/sub i/, the kinetic energies E/sub i/ and the linear momentum vectors p/sub i/ of the two detected nuclei were deduced. The deficits (marked by delta) of these parameters were obtained using the conservation laws. The deduction of nuclear charges, linear momenta etc. is correct for any number of particles. The distributions of the linear momenta are presented on the event-plane, which is defined by the coplanarity of the three momentum vectors p Vector1, p Vector2 and Δp Vector in the center of mass (cm) system. Additional information deduced from the scintillation counters are the multiplicity M of light particles and the ratio F/B of the number of particles detected in the forward and backward counters. In the reactions studied three fragment exit channels were clearly identified by means of the charge and momentum deficits deduced from two completely measured fragments and by the multiplicities of light particles. The reaction mechanism appears to be that of a direct fragmentation process and not of a normal deep inelastic process with subsequent fission of one of the two primary fragments

  8. High sensitivity boron quantification in bulk silicon using the 11B(p,α0)8Be nuclear reaction

    International Nuclear Information System (INIS)

    There is a great need to quantify sub-ppm levels of boron in bulk silicon. There are several methods to analyze B in Si: Nuclear Reaction Analysis using the 11B(p,α0)8Be reaction exhibits a quantification limit of some hundreds ppm of B in Si. Heavy Ion Elastic Recoil Detection Analysis offers a detection limit of 5 to 10 at. ppm. Secondary Ion Mass Spectrometry is the method of choice of the semiconductor industry for the analysis of B in Si. This work verifies the use of NRA to quantify B in Si, and the corresponding detection limits. Proton beam with 1.6 up to 2.6 MeV was used to obtain the cross-section of the 11B(p,α0)8Be nuclear reaction at 170° scattering angle. The results show good agreementwith literature indicating that the quantification of boron in silicon can be achieved at 100 ppm level (high sensitivity) at LAMFI-IFUSP with about 16% uncertainty. Increasing the detection solid angle and the collected beam charge, can reduce the detection limit to less than 100 ppm meeting present technological needs.

  9. 75 FR 80734 - Chronic Beryllium Disease Prevention Program

    Science.gov (United States)

    2010-12-23

    ... Beryllium Disease Prevention Program (CBDPP) (63 FR 66940). After considering the comments received, DOE... CFR Part 850 RIN 1992-AA39 Chronic Beryllium Disease Prevention Program AGENCY: Office of Health... beryllium disease prevention program. The Department solicits comment and information on the...

  10. Spectrographic determination of impurities in beryllium oxide

    International Nuclear Information System (INIS)

    A method for the spectrographic determination of Al, B, Cd, Co, Cu, Cr, Fe, Mg, NaNi, Si and Zn in nuclear grade beryllium oxide has been developed. The determination of Co, Al, Na and Zn is besed upon a carrier distillation technique. Better results were obtained with 2% Ga2O3 as carrier in beryllium oxide. For the elements B, Cd, Cu, Fe, Cr, Mg, Ni and Si the sample is loaded in a Scribner-Mullin shallow cup electrode, covered with graphite powder and excited in DC arc. The relative standard deviation values for different elements are in the range of 10 to 20%. The method fulfills requirements of precision and sensitivity for specification analysis of nuclear grade beryllium oxide.(Author)

  11. Exclusive Measurement of the $pp \\to nn\\pi^+\\pi^+$ Reaction at 1.1 GeV

    CERN Document Server

    Bashkanov, M; Calen, H; Clement, H; Doroshkevich, E; Demiroers, L; Ekstrom, C; Fransson, K; Gustafsson, L; Hoistad, B; Ivanov, G; Jacewicz, M; Jiganov, E; Johansson, T; Khakimova, O; Keleta, S; Koch, I; Kren, F; Kullander, S; Kupsc, A; Marciniewski, P; Meier, R; Morosov, B; Pauly, C; Petren, H; Petukhov, Y; Povtorejko, A; Ruber, R J M Y; Schonning, K; Scobel, W; Shwartz, B; Stepaniak, J; Thorngren-Engblom, P; Tikhomirov, V; Wagner, G J; Wolke, M; Yamamoto, A; Zabierowski, J; Zlomanczuk, J

    2010-01-01

    First exclusive data for the $pp \\to nn\\pi^+\\pi^+$ reaction have been obtained at CELSIUS with the WASA detector setup at a beam energy of $T_p$ = 1.1 GeV. Total and differential cross sections disagree with theoretical calculations, which predict the $\\Delta\\Delta$ excitation to be the dominant process at this beam energy. Instead the data require the excitation of a higher-lying $\\Delta$ state, most likely the $\\Delta(1600)$, to be the leading process.

  12. Experimental study of bound states in $^{12}$Be through low-energy $^{11}$Be($d,p$)-transfer reactions

    CERN Document Server

    Johansen, J G; Borge, M J G; Cubero, M; Diriken, J; Elsevier, J; Fraile, L M; Fynbo, H O U; Gaffney, L P; Gernhäuser, R; Jonson, B; Koldste, G T; Konki, J; Kröll, T; Krücken, R; Mücher, D; Nilsson, T; Nowak, K; Pakarinen, J; Pesudo, V; Raabe, R; Riisager, K; Seidlitz, M; Tengblad, O; Törnqvist, H; Voulot, D; Warr, N; Wenander, F; Wimmer, K; De Witte, H

    2013-01-01

    The bound states of $^{12}$Be have been studied through a $^{11}$Be$(d,p)^{12}$Be transfer reaction experiment in inverse kinematics. A 2.8 MeV/u beam of $^{11}$Be was produced using the REX-ISOLDE facility at CERN. The outgoing protons were detected with the T-REX silicon detector array. The MINIBALL germanium array was used to detect $\\gamma$-rays from the excited states in $^{12}$Be. The $\\gamma$-ray detection enabled a clear identification of the four known bound states in $^{12}$Be, and each of the states has been studied individually. Differential cross sections over a large angular range have been extracted. Spectroscopic factors for each of the states have been determined from DWBA calculations and have been compared to previous experimental and theoretical results.

  13. Low-temperature solubility of copper in beryllium, in beryllium--aluminum, and in beryllium--silicon using ion beam

    International Nuclear Information System (INIS)

    Ion implantation and ion backscattering analysis have been used to measure the solubility of copper in beryllium over the temperature range 593 to 1023 K, and to determine the effect on the copper solubility of aluminum and silicon impurities. The binary data extend 280 K lower in temperature than previous results, while the ternary measurements are unique. The information is pertinent to the use of copper for solution strengthening of beryllium. Diffusion couples were formed by ion implantation of copper into single-crystal beryllium at room temperature, followed where appropriate by implantation of aluminum or silicon. The samples were then annealed isothermally, and the time-evolution of the composition-vs-depth profile, determined by ion backscattering analysis, yielded the solubility of copper. Measurements at exceptionally low temperatures were facilitated by the short diffusion distances, approximately equal to 0.1 mu m, and the use of neon irradiation to accelerate diffusion. The resulting binary data for the solubility C0 of copper in beryllium merge smoothly into previous results at higher temperatures. The combined data, covering the temperature range 593 to 1373 K, are well described by C0 = (12.6 at. pct) . exp (-842 K/T). In the ternary regime, the effects of aluminum and silicon on the solubility of copper were found to be small

  14. An investigation of the role of spectroscopic factors in the breakup reaction of 11Be

    CERN Document Server

    Canbula, Bora; Canbula, Deniz; Babacan, Halil

    2014-01-01

    The experimental elastic cross section data of the projectile 11Be on target 12C at 49.3 MeV/nucleon energy is analysed. The calculations for the elastic scattering is performed by the phenomenological optical model. The different optical potentials to include breakup effects into the calculations, which are neutron+12C, neutron+10Be and 10Be+12C are described with the aid of the global potentials for neutron interactions and fitted to experimental data for the core and target interaction. Also, the first analysis of the optical model for 10Be on target 12C at 39.1 MeV is done for building the interaction potential of the core and the target for 11Be. For investigating the effects of the spectroscopic factor obtained from the direct capture process using the nuclear level density are compared with the previous cross section and spectroscopic factor results. Obtained results for the elastic cross section are reproduced the experimental data very well, and shows the requirement of including spectroscopic proper...

  15. Preliminary results for explosion bonding of beryllium to copper

    Energy Technology Data Exchange (ETDEWEB)

    Butler, D.J. [Northwest Technical Industries, Inc., Sequim, WA (United States); Dombrowski, D.E. [Brush Wellman, Inc., Cleveland, OH (United States)

    1995-09-01

    This program was undertaken to determine if explosive bonding is a viable technique for joining beryllium to copper substrates. The effort was a cursory attempt at trying to solve some of the problems associated with explosive bonding beryllium and should not be considered a comprehensive research effort. There are two issues that this program addressed. Can beryllium be explosive bonded to copper substrates and can the bonding take place without shattering the beryllium? Thirteen different explosive bonding iterations were completed using various thicknesses of beryllium that were manufactured with three different techniques.

  16. Back-reaction and complementarity in 1+1 dilaton gravity

    CERN Document Server

    Balasubramanian, V; Balasubramanian, Vijay; Verlinde, Herman

    1995-01-01

    We study radiation from black holes in the effective theory produced by integrating gravity and the dilaton out of 1+1 dilaton gravity. The semiclassical wavefunctions for the dressed particles show that the self-interactions produce an unusual renormalization of the frequencies of outgoing states. Modes propagating in the dynamical background of an incoming quantum state are seen to acquire large scattering phases that nevertheless conspire, in the absence of self-interactions, to preserve the thermality of the Hawking radiation. However, the in-out scattering matrix does not commute with the self-interactions and this could lead to observable corrections to the final state. Finally, our calculations explicitly display the limited validity of the semiclassical theory of Hawking radiation and provide support for a formulation of black hole complementarity.

  17. [11C]Carbon Monoxide in Palladium- / Selenium-Promoted Carbonylation Reactions : Synthesis of 11C-Imides, Hydrazides, Amides, Carboxylic Acids, Carboxylic Esters, Carbothioates, Ketones and Carbamoyl Compounds

    OpenAIRE

    Karimi, Farhad

    2002-01-01

    [11C]Carbon monoxide in low concentrations has been used in palladium- or seleniummediated carbonylation reactions such as the synthesis of 11C-imides, hydrazides, amides, carboxylic acids, esters, carbothioates, ketones and carbamoyl compounds. In these reactions aryl iodides have been used in most cases. However, less reactive aryl triflate, chloride and bromides were activated using tetrabutylammonium iodide. The reactivities of nucleophiles may have influence on the radiochemical yield of...

  18. Study of 12Be using the 11Be(9Be,8Be) transfer reaction at TRIUMF ISAC-II

    Science.gov (United States)

    Braid, Ryan; Sarazin, Fred; TIGRESS Collaboration; (PCB)2 Collaboration

    2015-10-01

    Recent results at TRIUMF and NSCL have called into question the structure of 12Be, therefore another look at this nucleus is desirable. The structure is important information for theoretical models, since it constrains the mechanism that produces parity inversion in 11Be. The 12Be structure was probed in July 2014 using the (PCB)2 array (Printed Circuit Board Based Charged Particle) inside TIGRESS (TRIUMF - ISAC Gamma Ray Escape Suppressed Spectrometer) at TRIUMF using the 11Be(9Be,8Be)12Be reaction at 55 MeV in inverse kinematics. A second set of data at 30 MeV was collected. This reaction has numerous advantages over the traditional (d,p) method, foremost of which is the 8Be --> 2 α breakup since it allows for very clean identification and tagging. Additionally, TIGRESS will allow precise γ-tagging for the excited states. The initial data and analysis will be presented in this talk. This work is partially supported by the US Department of Energy through Grant/Contract No. DE-FG03-93ER40789 (Colorado School of Mines).

  19. Trace determination of sulfur and beryllium by activation in an oxygen-18 ion beam

    International Nuclear Information System (INIS)

    A novel method for determining traces of sulfur and beryllium is described. The reaction 32S(18O,t)47V is selective if using a 39 MeV 18O6+ beam. The detection limit is 3 ppm in an iron matrix and a precision of +-15% has been achieved for samples with 15 to 20 ppm sulfur. In the case of beryllium determination, two reactions were studied, namely 9Be(18O,2α)19O and 9Be(18O,d)25Na. At 25 MeV 18O5+, the first reaction is completely selective and yields a 5 ng detection limit for a 5 minutes irradiation. Boron is a nuclear interference when using the second reaction which yields a 110 ng detection limit in the same conditions. An irradiation chamber has been constructed that allows to decrease these limits. The technique was tested by analyzing two standard materials (NBS-SRM 394 and IRSID 508-1) whose sulfur content is certified. The results obtained by analyzing a biological sample (NBS-SRM 1571) for sulfur and a metallic sample Cu-Be for beryllium, are discussed

  20. Potential exposures and risks from beryllium-containing products.

    Science.gov (United States)

    Willis, Henry H; Florig, H Keith

    2002-10-01

    Beryllium is the strongest of the lightweight metals. Used primarily in military applications prior to the end of the Cold War, beryllium is finding new applications in many commercial products, including computers, telecommunication equipment, and consumer and automotive electronics. The use of beryllium in nondefense consumer applications is of concern because beryllium is toxic. Inhalation of beryllium dust or vapor causes a chronic lung disease in some individuals at concentrations as low as 0.01 microg/m3 in air. As beryllium enters wider commerce, it is prudent to ask what risks this might present to the general public and to workers downstream of the beryllium materials industry. We address this question by evaluating the potential for beryllium exposure from the manufacturing, use, recycle, and disposal of beryllium-containing products. Combining a market study with a qualitative exposure analysis, we determine which beryllium applications and life cycle phases have the largest exposure potential. Our analysis suggests that use and maintenance of the most common types of beryllium-containing products do not result in any obvious exposures of concern, and that maintenance activities result in greater exposures than product use. Product disposal has potential to present significant individual risks, but uncertainties concerning current and future routes of product disposal make it difficult to be definitive. Overall, additional exposure and dose-response data are needed to evaluate both the health significance of many exposure scenarios, and the adequacy of existing regulations to protect workers and the public. Although public exposures to beryllium and public awareness and concern regarding beryllium risks are currently low, beryllium risks have psychometric qualities that may lead to rapidly heightened public concern. PMID:12442995

  1. Magnesium Cermets and Magnesium-Beryllium Alloys

    International Nuclear Information System (INIS)

    The paper describes some results of work on the development of magnesium-magnesium oxide cermets and of super heat-resistant magnesiumberyllium alloys produced by powder metallurgical methods. The introduction of even a minute quantity of finely dispersed magnesium oxide into magnesium results in a strengthening of the material, the degree of which increases with increased magnesium oxide concentration, although variation of this concentration within the limits of 0.3 to 5 wt.% has a comparatively slight effect on the corresponding variation in the short-term strength over the whole range of temperatures investigated. At 20oC, in the case of the cermets, σβ = 28 to 31 kg/mm2 and δ = 3 .5 to 4.5%; at 500oC σβ = 2.6 to 3.2 kg/mm2 and δ =30 to 40%. The positive effect of the finely dispersed oxide phase is particularly evident in protracted tests. For magnesium cermets, σ (300)/100 = 2.2 kg/mm2. Characteristic of the mixtures is the high thermal stability of the strength properties, linked chiefly with the thermodynamic stability of the strength-giving oxide phase in the metal matrix. The use of powder metallurgical methods has yielded super heat-resistant magnesium-beryllium alloys containing heightened concentrations of beryllium (PMB alloys). In their strength characteristics PMB alloys are close to Mg-MgO cermets, but the magnesium-beryllium alloys have a degree and duration of resistance to high temperature oxidation which exceeds the corresponding qualities of the magnesium alloys at present known. Thus, in air of 580oC, PMB alloys with 2 to 5% beryllium maintain a high resistance to oxidation for a period of over 12000 to 14000 h. This long-term heat resistance is chiefly a result of the amount of beryllium in the alloy, and increases with increasing beryllium content. PMB alloys are also marked by high resistance to short bursts of overheating. Magnesium cermets and magnesium-beryllium alloys, with their enhanced high-temperature stability, are capable

  2. Status of beryllium development for fusion applications

    International Nuclear Information System (INIS)

    Beryllium is a leading candidate material for the neutron multiplier of tritium breeding blankets and the plasma-facing component of first-wall and divertor systems. Depending on the application, the fabrication methods proposed include hot-pressing, hot-isostatic-pressing, cold-isostatic-pressing/sintering, rotary electrode processing and plasma spraying. Product forms include blocks, tubes, pebbles, tiles and coatings. While, in general, beryllium is not a leading structural material candidate, its mechanical performance, as well as its performance with regard to sputtering, heat transport, tritium retention/release, helium-induced swelling and chemical compatibility, is an important consideration in first-wall/blanket design. Differential expansion within the beryllium causes internal stresses which may result in cracking, thereby affecting the heat transport and barrier performance of the material. Overall deformation can result in loading of neighboring structural material. Thus, in assessing the performance of beryllium for fusion applications, it is important to have a good database in all of these performance areas, as well as a set of properties correlations and models for the purpose of interpolation/extrapolation.In this current work, the range of anticipated fusion operating conditions is reviewed. The thermal, mechanical, chemical compatibility, tritium retention/release, and helium retention/swelling databases are then reviewed for fabrication methods and fusion operating conditions of interest. Properties correlations and uncertainty ranges are also discussed. In the case of the more complex phenomena of tritium retention/release and helium-induced swelling, fundamental mechanisms and models are reviewed in more detail. Areas in which additional data are needed are highlighted, along with some trends which suggest ways of optimizing the performance of beryllium for fusion applications. (orig.)

  3. Labelling of the solvent DMSO as side reaction of methylations with n.c.a. [11C]CH3I

    International Nuclear Information System (INIS)

    Competing labelling of solvent dimethyl sulfoxide (DMSO) can occur during the 11C-methylation of amine precursors. A kinetic analysis of the methylation reaction of DMSO with n.c.a. [11C]CH3I was performed at 120 deg. C resulting in rate constants. The rate constant for the formation of the intermediate, methylated DMSO ([11C]DMSO-M), is compared to the reaction of [11C]CH3I with two tertiary amines, namely Dexetimide and Desmethyloxotremorine-M. The specific activity of the labelled product is reduced due to partial 12C-methylation of the precursor amines by [11C]DMSO-M in cases of significant DMSO labelling as side reaction

  4. Integrated system of production of neutronics and photonics calculational constants. Volume 21, Part A. Maxwell-averaged reaction rates (sigma v-bar) for selecteed reactions between ions with atomic mass less than or equal to 11

    International Nuclear Information System (INIS)

    Maxwell-averaged reaction rates (sigma v-bar) are presented for 24 interactions between 1H, 2H, 3H, 3He, 4He, 6Li, 7Li, 10B, and 11B ions. The reactions rates are calculated by use of the evaluated data of the LLL Evaluated Nuclear Data Library (ENDL). 5 figures, 5 tables

  5. Development of beryllium bonds for plasma-facing components

    International Nuclear Information System (INIS)

    This study concerns the techniques of bonding beryllium to both structural material (AISI 316 SS) and heat sink material (copper and DS-copper) plates, and the characterization of the bonding material obtained. Conventional bonding techniques for joining Be to SS and copper using brazing alloys were first investigated. The best result was obtained using a silver-copper eutetic alloy as a brazing alloy. However, the high-temperature capability of the materials prepared by this method is limited by the performance of brazing alloys at the operating temperature. To avoid this problem, we are developing a joining process known as solid-state reaction bonding that improves the capability at the operating temperature. (orig.)

  6. Electron microscope observation of single - crystalline beryllium thin foils

    International Nuclear Information System (INIS)

    Thin foils prepared from single crystalline beryllium simples deformed at room temperature, have been observed by transmission electron microscopy. The various deformation modes have been investigated separately, from their early stages and their characteristic dislocation configurations have been observed. Basal slip is characterized at is outset by the presence of numerous dipoles and elongated prismatic loops. More pronounced cold work leads to the formation of dislocation tangles and bundles which eventually give a cellular structure. Prismatic slip begins by the cross-slip of dislocations from the basal plane into the prismatic plane. A cellular structure is equally observed in heavily deformed samples. Sessile dislocations have been observed in twin boundaries; they are produced by reactions between slip dislocations and twin dislocations. Finally, the study of samples quenched from 1100 deg. C and annealed at 200 deg. C has shown that the observed loops lie in prismatic planes and have a Burgers vector b 1/3. (authors)

  7. Safety handling of beryllium for fusion technology R and D

    International Nuclear Information System (INIS)

    Feasibility of beryllium use as a blanket neutron multiplier, first wall and plasma facing material has been studied for the D-T burning experiment reactors such as ITER. Various experimental work of beryllium and its compounds will be performed under the conditions of high temperature and high energy particle exposure simulating fusion reactor conditions. Beryllium is known as a hazardous substance and its handling has been carefully controlled by various health and safe guidances and/or regulations in many countries. Japanese regulations for hazardous substance provide various guidelines on beryllium for the protection of industrial workers and environment. This report was prepared for the safe handling of beryllium in a laboratory scale experiments for fusion technology R and D such as blanket development. Major items in this report are; (1) Brief review of guidances and regulations in USA, UK and Japan. (2) Safe handling and administration manuals at beryllium facilities in INEL, LANL and JET. (3) Conceptual design study of beryllium handling facility for small to mid-scale blanket R and D. (4) Data on beryllium toxicity, example of clinical diagnosis of beryllium disease, and environmental occurence of beryllium. (5) Personnel protection tools of Japanese Industrial Standard for hazardous substance. (author) 61 refs

  8. Control of beryllium powder at a DOE facility

    International Nuclear Information System (INIS)

    Beryllium is contained in a number of domestic and national defense items. Although many items might contain beryllium in some manner, few people need worry about the adverse effects caused by exposure to beryllium because it is the inhalable form of beryllium that is most toxic. Chronic beryllium disease (CBD), a granulomas and fibrotic lung disease with long latency, can be developed after inhalation exposures to beryllium. It is a progressive, debilitating lung disease. Its occurrence in those exposed to beryllium has been difficult to predict because some people seem to react to low concentration exposures whereas others do not react to high concentration exposures. Onset of the disease frequently occurs between 15 to 20 years after exposure begins. Some people develop the disease after many years of low concentration exposures but others do not develop CBD even though beryllium is shown to be present in lungs and urine. Conclusions based on these experiences are that their is some immunological dependence of developing CBD in about 3--4% of the exposed population, but the exact mechanism involved has not yet been identified. Acute beryllium disease can occur after a single exposure to a concentration of greater than 0.100 mg/m3 (inhalation exposure); it is characterized by the development of chemical pneumoconiosis, a respiratory disease. The acute effect of skin contact is a dermatitis characterized by itching and reddened, elevated, or fluid-accumulated lesions which appear particularly on the exposed surfaces of the body, especially the face, neck, arms, and hands. Small particles of beryllium that enter breaks in the skin can lead to the development of granulomas and/or open sores that do not heal until the beryllium has been removed. Our interest is only airborne beryllium, which is found in areas that machine or produce beryllium

  9. Experimental study of bound states in 12Be through low-energy 11Be(d,p)-transfer reactions

    DEFF Research Database (Denmark)

    Johansen, Jacob S.; Bildstein, V.; Borge, M. J. G.;

    2013-01-01

    The bound states of 12Be have been studied through a 11Be(d,p)12Be transfer reaction experiment in inverse kinematics. A 2.8 MeV/u beam of 11Be was produced using the REX-ISOLDE facility at CERN. The outgoing protons were detected with the T-REX silicon detector array. The MINIBALL germanium arra...

  10. The ep -->e'p eta reaction at and above the S11(1535) baryon resonance.

    Science.gov (United States)

    Thompson, R; Dytman, S; Kim, K Y; Mueller, J; Adams, G S; Amaryan, M J; Anciant, E; Anghinolfi, M; Asavapibhop, B; Auger, T; Audit, G; Avakian, H; Barrow, S; Battaglieri, M; Beard, K; Bektasoglu, M; Bertozzi, W; Bianchi, N; Biselli, A; Boiarinov, S; Bonner, B E; Briscoe, W J; Brooks, W; Burkert, V D; Calarco, J R; Capitani, G; Carman, D S; Carnahan, B; Cole, P L; Coleman, A; Connelly, J; Cords, D; Corvisiero, P; Crabb, D; Crannell, H; Cummings, J; Day, D; Degtyarenko, P V; Demirchyan, R A; Dennis, L C; Deppman, A; De Sanctis, E; De Vita, R; Dhuga, K S; Djalali, C; Dodge, G E; Doughty, D; Dragovitsch, P; Dugger, M; Eckhause, M; Efremenko, Y V; Egiyan, H; Egiyan, K S; Elouadrhiri, L; Farhi, L; Feuerbach, R J; Ficenec, J; Fissum, K; Freyberger, A; Funsten, H; Gai, M; Gavrilov, V B; Gilfoyle, G P; Giovanetti, K; Gilad, S; Girard, P; Griffioen, K A; Guidal, M; Guillo, M; Gyurjyan, V; Hancock, D; Hardie, J; Heddle, D; Heisenberg, J; Hersman, F W; Hicks, K; Hicks, R S; Holtrop, M; Hyde-Wright, C E; Ito, M M; Jenkins, D; Joo, K; Kane, J; Khandaker, M; Kim, W; Klein, A; Klein, F J; Klusman, M; Kossov, M; Kuhn, S E; Kuang, Y; Laget, J M; Lawrence, D; Leskin, G A; Longhi, A; Loukachine, K; Lucas, M; Magahiz, R; Major, R W; Manak, J J; Marchand, C; Matthews, S K; McAleer, S; McCarthy, J; McNabb, J W; Mecking, B A; Mestayer, M D; Meyer, C A; Minehart, R; Mirazita, M; Miskimen, R; Muccifora, V; Mutchler, G S; Napolitano, J; Niyazov, R A; Ohandjanyan, M S; O'Brien, J T; Opper, A; Patois, Y; Peterson, G A; Philips, S; Pivnyuk, N; Pocanic, D; Pogorelko, O; Polli, E; Preedom, B M; Price, J W; Qin, L M; Raue, B A; Reolon, A R; Riccardi, G; Ricco, G; Ripani, M; Ritchie, B G; Ronchetti, F; Rossi, P; Roudot, F; Rowntree, D; Rubin, P D; Salgado, C W; Sanzone, M; Sapunenko, V; Sarty, A; Sargsyan, M; Schumacher, R A; Shafi, A; Sharabian, Y G; Shaw, J; Shuvalov, S M; Skabelin, A; Smith, T; Smith, C; Smith, E S; Sober, D I; Spraker, M; Stepanyan, S; Stoler, P; Taiuti, M; Taylor, S; Tedeschi, D; Tung, T Y; Vineyard, M F; Vlassov, A; Weller, H; Weinstein, L B; Welsh, R; Weygand, D P; Whisnant, S; Witkowski, M; Wolin, E; Yegneswaran, A; Yun, J; Zhou, Z; Zhao, J

    2001-02-26

    New cross sections for the reaction e p-->e p eta are reported for total center of mass energy W = 1.5--1.86 GeV and invariant momentum transfer Q2 = 0.25--1.5 (GeV/c)(2). This large kinematic range allows extraction of important new information about response functions, photocouplings, and eta N coupling strengths of baryon resonances. Newly observed structure at W approximately 1.65 GeV is shown to come from interference between S and P waves and can be interpreted with known resonances. Improved values are derived for the photon coupling amplitude for the S11(1535) resonance. PMID:11290228

  11. Investigations on the diagnostic of intense pulsed proton beams with the 11B(p,α)2α-reaction

    International Nuclear Information System (INIS)

    To obtain more accurate and reliable ion beam focus and divergence analysis in high power ion diode experiments we have developed shadow box and pinhole camera techniques using the 11B(p,α)2α reaction to reduce the particle flux on the nuclear track detector. The α-yield is maximized and the Rutherford scattered 'background' is eliminated by a set of attenuation and filter foils tailored to the proton beam energy. It has been demonstrated in a number of Van de Graaff measurements with monoenergetic protons that thus a complete elimination of Rutherford scattered primary particles is possible. Automated microscopic counting of the particle tracks on the detectors is used for quantitative evaluation. The capabilities of this diagnostic are demonstrated for measurements of the current density distribution in the focus of the pinch reflex diode. (orig.)

  12. Highly-focused boron implantation in diamond and imaging using the nuclear reaction 11B(p, α)8Be

    Science.gov (United States)

    Ynsa, M. D.; Ramos, M. A.; Skukan, N.; Torres-Costa, V.; Jakšić, M.

    2015-04-01

    Diamond is an especially attractive material because of its gemological value as well as its unique mechanical, chemical and physical properties. One of these properties is that boron-doped diamond is an electrically p-type semiconducting material at practically any boron concentration. This property makes it possible to use diamonds for multiple industrial and technological applications. Boron can be incorporated into pure diamond by different techniques including ion implantation. Although typical energies used to dope diamond by ion implantation are about 100 keV, implantations have also been performed with energies above MeV. In this work CMAM microbeam setup has been used to demonstrate capability to implant boron with high energies. An 8 MeV boron beam with a size of about 5 × 3 μm2 and a beam current higher than 500 pA has been employed while controlling the beam position and fluence at all irradiated areas. The subsequent mapping of the implanted boron in diamond has been obtained using the strong and broad nuclear reaction 11B(p, α)8Be at Ep = 660 keV. This reaction has a high Q-value (8.59 MeV for α0 and 5.68 MeV for α1) and thus is almost interference-free. The sensitivity of the technique is studied in this work.

  13. Specification for nuclear-grade beryllium oxide powder

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This specification defines the physical and chemical requirements of nuclear-grade beryllium oxide (BeO) powder to be used in fabricating nuclear components. 1.2 This specification does not include requirements for health and safety. , , It recognizes the material as a Class B poison and suggests that producers and users become thoroughly familiar with and comply to applicable federal, state, and local regulations and handling guidelines. 1.3 Special tests and procedures are given in Annex A1 and Annex A2. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

  14. Nuclear charge radius measurements of radioactive beryllium isotopes

    CERN Multimedia

    2002-01-01

    We propose to measure the nuclear charge radii of the beryllium isotopes $^{7,9,10}$Be and the one-neutron halo isotope $^{11}$Be using laser spectroscopy of trapped ions. Ions produced at ISOLDE and ionized with the laser ion source will be cooled and bunched in the radio-frequency buncher of the ISOLTRAP experiment and then transferred into a specially designed Paul trap. Here, they will be cooled to temperatures in the mK range employing sympathetic and direct laser cooling. Precision laser spectroscopy of the isotope shift on the cooled ensemble in combination with accurate atomic structure calculations will provide nuclear charge radii with a precision of better than 3%. This will be the first model-independent determination of a one-neutron halo nuclear charge radius.

  15. Ion-plasma deposition of aluminium and beryllium coatings on inner surfaces of hollow cylindrical cathodes

    International Nuclear Information System (INIS)

    Application of metal coatings to inner surfaces of hollow cylindrical products of small diameter is simulated and practically realized by ion-plasma deposition method. In the modes proposed and with the cylinder diameter being 10-20 mm, a uniform coating of aluminium and beryllium is provided for at the length equal to (3-4) d, which has not been possible to be realized previously. 11 refs.; 2 tabs

  16. The differential elastic scattering of 14.7 MeV neutron from beryllium

    International Nuclear Information System (INIS)

    A fast neutron associated particle time-of-flight (TOF) spectrometer was used for measuring neutron differential cross sections on beryllium nuclei in this experiment. The total error of the differential cross section is from 7.5% to 11.5% including the statistical error 0.5∼3.5 and the efficiency calibration error 6∼7%. (2 tabs., 1 fig)

  17. Study on neutron irradiation behavior of beryllium as neutron multiplier

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, Etsuo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    1998-03-01

    More than 300 tons beryllium is expected to be used as a neutron multiplier in ITER, and study on the neutron irradiation behavior of beryllium as the neutron multiplier with Japan Materials Testing Reactor (JMTR) were performed to get the engineering data for fusion blanket design. This study started as the study on the tritium behavior in beryllium neutron reflector in order to make clear the generation mechanism on tritium of JMTR primary coolant since 1985. These experiences were handed over to beryllium studies for fusion study, and overall studies such as production technology of beryllium pebbles, irradiation behavior evaluation and reprocessing technology have been started since 1990. In this presentation, study on the neutron irradiation behavior of beryllium as the neutron multiplier with JMTR was reviewed from the point of tritium release, thermal properties, mechanical properties and reprocessing technology. (author)

  18. Status of material development for lifetime expansion of beryllium reflector

    International Nuclear Information System (INIS)

    Beryllium has been used as the reflector element material in the reactor, specifically S-200F structural grade beryllium manufactured by Materion Brush Beryllium and Composites (former, Brush Wellman Inc.). As a part of the reactor upgrade, the Japan Atomic Energy Agency (JAEA) also has carried out the cooperation experiments to extend the operating lifetime of the beryllium reflector elements. It will first be necessary to determine which of the material's physical, mechanical and chemical properties will be the most influential on that choice. The irradiation testing plans to evaluate the various beryllium grades are also briefly considered and prepared. In this paper, material selection, irradiation test plan and PEI development for lifetime expansion of beryllium are described for material testing reactors. (author)

  19. Characterization of plasma sprayed beryllium ITER first wall mockups

    Energy Technology Data Exchange (ETDEWEB)

    Castro, R.G.; Vaidya, R.U.; Hollis, K.J. [Los Alamos National Lab., NM (United States). Material Science and Technology Div.

    1998-01-01

    ITER first wall beryllium mockups, which were fabricated by vacuum plasma spraying the beryllium armor, have survived 3000 thermal fatigue cycles at 1 MW/m{sup 2} without damage during high heat flux testing at the Plasma Materials Test Facility at Sandia National Laboratory in New Mexico. The thermal and mechanical properties of the plasma sprayed beryllium armor have been characterized. Results are reported on the chemical composition of the beryllium armor in the as-deposited condition, the through thickness and normal to the through thickness thermal conductivity and thermal expansion, the four-point bend flexure strength and edge-notch fracture toughness of the beryllium armor, the bond strength between the beryllium armor and the underlying heat sink material, and ultrasonic C-scans of the Be/heat sink interface. (author)

  20. Mechanisms of hydrogen retention in metallic beryllium and beryllium oxide and properties of ion-induced beryllium nitride; Rueckhaltemechanismen fuer Wasserstoff in metallischem Beryllium und Berylliumoxid sowie Eigenschaften von ioneninduziertem Berylliumnitrid

    Energy Technology Data Exchange (ETDEWEB)

    Oberkofler, Martin

    2011-09-22

    In the framework of this thesis laboratory experiments on atomically clean beryllium surfaces were performed. They aim at a basic understanding of the mechanisms occurring upon interaction of a fusion plasma with a beryllium first wall. The retention and the temperature dependent release of implanted deuterium ions are investigated. An atomistic description is developed through simulations and through the comparison with calculations based on density functional theory. The results of these investigations are compared to the behaviour of hydrogen upon implantation into thermally grown beryllium oxide layers. Furthermore, beryllium nitride is produced by implantation of nitrogen into metallic beryllium and its properties are investigated. The results are interpreted with regard to the use of beryllium in a fusion reactor. (orig.)

  1. Plasma cleaning of beryllium coated mirrors

    Science.gov (United States)

    Moser, L.; Marot, L.; Steiner, R.; Newman, M.; Widdowson, A.; Ivanova, D.; Likonen, J.; Petersson, P.; Pintsuk, G.; Rubel, M.; Meyer, E.; Contributors, JET

    2016-02-01

    Cleaning systems of metallic first mirrors are needed in more than 20 optical diagnostic systems from ITER to avoid reflectivity losses. Currently, plasma sputtering is considered as one of the most promising techniques to remove deposits coming from the main wall (mainly beryllium and tungsten). This work presents the results of plasma cleaning of rhodium and molybdenum mirrors exposed in JET-ILW and contaminated with typical tokamak elements (including beryllium and tungsten). Using radio frequency (13.56 MHz) argon or helium plasma, the removal of mixed layers was demonstrated and mirror reflectivity improved towards initial values. The cleaning was evaluated by performing reflectivity measurements, scanning electron microscopy, x-ray photoelectron spectroscopy and ion beam analysis.

  2. Hot reactions in the systems 11C/H2O(l), 11C/H2O-NH3(l) and 13N/H2O(g)

    International Nuclear Information System (INIS)

    The chemical reactions of hot 11C with liquid water and a water ammonia mixture of mass ratio 3:1 and of 13N with water vapour were studied at T = 295 K. 11C was generated by the nuclear processes 16O(p,α,pn)11C and 14N(p,α)11C. 13N was produced via the 16O(p,α)13N nuclear reaction. The proton radiation dose was varied from D* = 2.8x10-3 to 0.28 eV per target molecule for the system 11C/H2O(l), from D* = 2.2 to 32 eV for the system 11C/H2O-NH3(l) and from D* = 0.13 to 6.2 eV for the system 13N/H2O(g), in order to follow radiolytic changes of the reaction products. Products of the system 11C/H2O(l) were 11CO2 (98-100% radiochemical yield) and 11CO (max. 1.5%). For the system 11C/H2O-NH3(l) six products (11CO2, 11CO, H11COOH, 11CH2O, 11CH3OH and 11CH4) were observed at radiation doses up to D* = 32 eV. In the system 13N/H2O(g) five products were detected: 13NO2, 13NO, 13NN, 13NNO and some 13NH3. 13NO is the main product at lowest doses with radiochemical yields exceeding 45%. With increasing radiolysis 13NO is changed to 13NO2. At higher doses 13NN becomes the main product. The system 11C/H2O-NH3(l) seems to bear some importance for the production of labelled precursors for the synthesis of radiopharmaceuticals. The interesting products 11CH2O and 11CH3OH are still formed under intensive irradiation which is necessary for the production of high radioactivities for nuclear medical application. (orig./RB)

  3. Computer simulation of electronic excitations in beryllium

    CERN Document Server

    Popov, A V

    2016-01-01

    An effective method for the quantitative description of the electronic excited states of polyatomic systems is developed by using computer technology. The proposed method allows calculating various properties of matter at the atomic level within the uniform scheme. A special attention is paid to the description of beryllium atoms interactions with the external fields, comparable by power to the fields in atoms, molecules and clusters.

  4. Low cycle thermal fatigue testing of beryllium

    International Nuclear Information System (INIS)

    A novel technique has been used to test the relative low cycle thermal fatigue resistance of different grades of US and Russian beryllium, which is proposed as plasma facing armor for fusion reactor first wall, limiter and divertor components. The 30 kW electron beam test system at Sandia National Laboratories was used to sweep the beam spot along one direction at 1 Hz. This produces a localized temperature ''spike'' of 750 C for each pass of the beam. Large thermal stresses in excess of the yield strength are generated, due to very high spot heat flux, 25 MWm-2. Cyclic plastic strains on the order of 0.6% produced visible cracking on the heated surface in less than 3000 cycles. An in-vacuo fiber optic borescope was used to visually inspect the beryllium surfaces for crack initiation. Grades of US beryllium tested included: S-65C, S-65H, S-200F, S200F-H, SR-200, I-400, extruded high purity, HIP'd spherical powder, porous beryllium (94 and 98% dense), Be/30%, BeO, Be/60% BeO, and TiBe12. Russian grades included: TPG-56, TShGT, DShG-200, and TSHG-56. Both thenumber of cycles tocrack initiation and the depth of crack propagation, were measured. The most fatigue resistant grades were S-65C, DShG-200, TShGT and TShG-56. Rolled sheet Be (SR-200) showed excellent crack propagation resistance in the plane of rolling, despite early formation of delamination cracks. Only one sample showed no evidence of surface melting, Extruded (T). Metallographic and chemical analyses are provided. Good agreement was found between the measured depth of cracks and a 2-D elastic-plastic finite element stress analysis. (orig.)

  5. Dynamic behaviour of S200F beryllium

    International Nuclear Information System (INIS)

    Compression tests have been made on a large scale of strain, strain rate (up to 2000 s-1) and temperature (between 20 C and 300 C). From these experiences, we have calculated a constitutive model for beryllium S200F, which can be used by computer codes. Its formulation is not far from Steinberg, Cochran and Guinan's. But in our case, the influences of temperature and strain rate appear clearly within the expression. To validate our equation, we have used it in a computer code. Its extrapolation for higher strain rates is in good agreement with experiments such as Taylor impact tests or plate impact tests (strain rates greater than 104 s-1). With micrography, we could settle a link between the main strain mode within the material, and the variation of one parameter of the model. Beside the constitutive model, we have shown that shock loaded beryllium behaves in two different ways. If the strain rate is lower than 5.106 s-1, then it is proportional to the squared shock pressure. Beyond, it is a linear function of shock pressure to the power of four. By a spall study on beryllium, we have confirmed that it is excessively fragile. Its fracture is sudden, at a strength near 1 GPa. (author)

  6. Permeation behavior of deuterium implanted into beryllium

    International Nuclear Information System (INIS)

    Study on Implantation Driven Permeation (IDP) behavior of deuterium through pure beryllium was investigated as a part of the research to predict the tritium permeation through the first wall components ITER (International Thermonuclear Experimental Reactor). The permeation experiments were carried out with two beryllium specimens, one was an unannealed specimen and the other was that annealed at 1173 K. The permeation flux was measured as a function of specimen temperature and incident ion flux. Surface analysis of specimen was also carried out after the permeation experiment. Permeation was observed only with the annealed specimen and no significant permeation was observed with unannealed specimen under the present experimental condition (maximum temperature: 685 K, detection limit: 1x1013 D atoms/m2s). It could be attributed that the intrinsic lattice defects, which act as diffusion preventing site, decreased with the specimen annealing. Based on the result of steady and transient permeation behavior and surface analysis, it was estimated that the deuterium permeation implanted into annealed beryllium was controlled by surface recombination due to the oxide layer on the surface of the permeated side. (author)

  7. Interaction of nitrogen ions with beryllium surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Dobes, Katharina [Institute of Applied Physics, TU Wien, Association EURATOM ÖAW, Vienna (Austria); Köppen, Martin [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH, 52425 Jülich (Germany); Oberkofler, Martin [Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, D-85748 Garching (Germany); Lungu, Cristian P.; Porosnicu, Corneliu [National Institute for Laser, Plasma, and Radiation Physics, Bucharest (Romania); Höschen, Till; Meisl, Gerd [Max-Planck-Institut für Plasmaphysik, Boltzmannstraße 2, D-85748 Garching (Germany); Linsmeier, Christian [Institute of Energy and Climate Research – Plasma Physics, Forschungszentrum Jülich GmbH, 52425 Jülich (Germany); Aumayr, Friedrich, E-mail: aumayr@iap.tuwien.ac.at [Institute of Applied Physics, TU Wien, Association EURATOM ÖAW, Vienna (Austria)

    2014-12-01

    The interaction of energetic nitrogen projectiles with a beryllium surface is studied using a highly sensitive quartz crystal microbalance technique. The overall mass change rate of the beryllium sample under N{sub 2}{sup +} ion impact at an ion energy of 5000 eV (i.e. 2500 eV per N) is investigated in situ and in real-time. A strong dependency of the observed mass change rate on the nitrogen fluence (at constant flux) is found and can be attributed to the formation of a nitrogen-containing mixed material layer within the ion penetration depth. The presented data elucidate the dynamics of the interaction process and the surface saturation with increasing nitrogen fluence in a unique way. Basically, distinct interaction regimes can be discriminated, which can be linked to the evolution of the surface composition upon nitrogen impact. Steady state surface conditions are obtained at a total cumulative nitrogen fluence of ∼80 × 10{sup 16} N atoms per cm{sup 2}. In dynamic equilibrium, the interaction is marked by continuous surface erosion. In this case, the observed total sputtering yield becomes independent from the applied nitrogen fluence and is of the order of 0.4 beryllium atoms per impinging nitrogen atom.

  8. Behavior of beryllium pebbles under irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Dalle-Donne, M.; Scaffidi-Argentina, F. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany). Inst. fuer Neutronenphysik und Reactortechnik; Baldwin, D.L.; Gelles, D.S.; Greenwood, L.R.; Kawamura, H.; Oliver, B.M.

    1998-01-01

    Beryllium pebbles are being considered in fusion reactor blanket designs as neutron multiplier. An example is the European `Helium Cooled Pebble Bed Blanket.` Several forms of beryllium pebbles are commercially available but little is known about these forms in response to fast neutron irradiation. Commercially available beryllium pebbles have been irradiated to approximately 1.3 x 10{sup 22} n/cm{sup 2} (E>1 MeV) at 390degC. Pebbles 1-mm in diameter manufactured by Brush Wellman, USA and by Nippon Gaishi Company, Japan, and 3-mm pebbles manufactured by Brush Wellman were included. All were irradiated in the below-core area of the Experimental Breeder Reactor-II in Idaho Falls, USA, in molybdenum alloy capsules containing helium. Post-irradiation results are presented on density change measurements, tritium release by assay, stepped-temperature anneal, and thermal ramp desorption tests, and helium release by assay and stepped-temperature anneal measurements, for Be pebbles from two manufacturing methods, and with two specimen diameters. The experimental results on density change and tritium and helium release are compared with the predictions of the code ANFIBE. (author)

  9. Quantitative method of determining beryllium or a compound thereof in a sample

    Science.gov (United States)

    McCleskey, T. Mark; Ehler, Deborah S.; John, Kevin D.; Burrell, Anthony K.; Collis, Gavin E.; Minogue, Edel M.; Warner, Benjamin P.

    2010-08-24

    A method of determining beryllium or a beryllium compound thereof in a sample, includes providing a sample suspected of comprising beryllium or a compound thereof, extracting beryllium or a compound thereof from the sample by dissolving in a solution, adding a fluorescent indicator to the solution to thereby bind any beryllium or a compound thereof to the fluorescent indicator, and determining the presence or amount of any beryllium or a compound thereof in the sample by measuring fluorescence.

  10. Illicit injections in bodybuilders: a clinicopathological study of 11 cases in 9 patients with a spectrum of histological reaction patterns.

    Science.gov (United States)

    AbdullGaffar, Badr

    2014-12-01

    The practice of self-injection of anabolic steroids (AS) in bodybuilders is common. AS are not the only materials used by bodybuilders for muscle augmentation or image enhancement. Other materials, for example, plant oils, silicon, Vaseline, and paraffin are also injected either in a pure form or mixed with AS. Muscle bulking is the main aim. However, bodybuilders undergo illicit injections for cosmetic, therapeutic, and sexual purposes. Even though the practice of unsupervised injection is probably common in the sports community, site-specific complications are underreported in the medical literature and mostly limited to case reports. Complications can be clinically and pathologically challenging because some can be confused with nonneoplastic and, more important, with neoplastic lesions. Bodybuilders are reluctant to disclose information because of stigma and legal issues. This study attempts to correlate the clinical manifestations and histomorphological features of different injected materials used for different purposes by bodybuilders in our region. A series of 11 cases out of 9 male bodybuilders was studied. A variety of clinical presentations and histological tissue reactions was identified, with some overlapping features between some cases. We identified 5 basic tissue reaction patterns depending on the injected materials, site, and duration of injection. Certain histological features provide useful hints in the absence of prior knowledge of injection history. However, in other cases, a retrospective enquiry by clinicians is warranted to avoid pitfalls. The medical and sports community should be aware of these injection-site complications. Bodybuilders should be discouraged from this practice by implementing appropriate educational and legislative measures. PMID:25311454

  11. A DWBA analysis of the reaction B10(d,p) B11 and B10(t,d) B11 at incident energies between 2.5 and 21.0 MeV

    International Nuclear Information System (INIS)

    The angular distributions and the polarizations of protons from the reaction B10(d,p) B11 measured at the deuteron energies between 2.5 and 21.0 MeV and the angular distributions of deuterons from the reaction B10(t,d) B11 at E1 = 5.5 MeV were analyzed in terms of the DWBA theory. Zero range DWBA was used with and without radial cut-off, and approximate finite range calculations were also performed. Spectroscopic factors were obtained and compared with other experimental spectroscopic factors and with shell model predictions. (orig.) 891 WL/orig. 892 MB

  12. Measurement of the 12C(e,e′p)11B two-body breakup reaction at high missing momentum

    International Nuclear Information System (INIS)

    The five-fold differential cross section for the 12C(e,e′p)11B reaction was determined over a missing momentum range of 200–400 MeV c−1, in a kinematics regime with xB>1 and Q2=2.0 (GeV c−1)2. A comparison of the results with previous lower missing momentum data and with theoretical models are presented. The extracted distorted momentum distribution is shown to be consistent with previous data and extends the range of available data up to 400 MeV c−1. The theoretical calculations are from two very different approaches, one mean field and the other short range correlated; yet for this system the two approaches show striking agreement with the data and each other up to a missing momentum value of 325 MeV c−1. For larger momenta, the calculations diverge which is likely due to the factorization approximation used in the short range approach. (paper)

  13. Structural Evolution under Reaction Conditions of Supported (NH43HPMo11VO40 Catalysts for the Selective Oxidation of Isobutane

    Directory of Open Access Journals (Sweden)

    Fangli Jing

    2015-03-01

    Full Text Available When using heteropolycompounds in the selective oxidation of isobutane to methacrolein and methacrylic acid, both the keeping of the primary structure (Keggin units and the presence of acidic sites are necessary to obtain the desired products. The structural evolution of supported (NH43HPMo11VO40 (APMV catalysts under preliminary thermal oxidizing and reducing treatments was investigated. Various techniques, such as TGA/DTG (Thermo-Gravimetric Analysis/Derivative Thermo-Gravimetry, H2-TPR (Temperature Programed Reduction, in situ XRD (X-Ray Diffraction and XPS (X-ray Photoelectron Spectroscopy, were applied. It was clearly evidenced that the thermal stability and the reducibility of the Keggin units are improved by supporting 40% APMV active phase on Cs3PMo12O40 (CPM. The partial degradation of APMV takes place depending on temperature and reaction conditions. The decomposition of ammonium cations (releasing NH3 leads to the formation of vacancies favoring cationic exchanges between vanadium coming from the active phase and cesium coming from the support. In addition, the vanadium expelled from the Keggin structure is further reduced to V4+, species, which contributes (with Mo5+ to activate isobutane. The increase in reducibility of the supported catalyst is assumed to improve the catalytic performance in comparison with those of unsupported APMV.

  14. Relationship between reaction time, fine motor control, and visual-spatial perception on vigilance and visual-motor tasks in 22q11.2 Deletion Syndrome.

    LENUS (Irish Health Repository)

    Howley, Sarah A

    2012-10-15

    22q11.2 Deletion Syndrome (22q11DS) is a common microdeletion disorder associated with mild to moderate intellectual disability and specific neurocognitive deficits, particularly in visual-motor and attentional abilities. Currently there is evidence that the visual-motor profile of 22q11DS is not entirely mediated by intellectual disability and that these individuals have specific deficits in visual-motor integration. However, the extent to which attentional deficits, such as vigilance, influence impairments on visual motor tasks in 22q11DS is unclear. This study examines visual-motor abilities and reaction time using a range of standardised tests in 35 children with 22q11DS, 26 age-matched typically developing (TD) sibling controls and 17 low-IQ community controls. Statistically significant deficits were observed in the 22q11DS group compared to both low-IQ and TD control groups on a timed fine motor control and accuracy task. The 22q11DS group performed significantly better than the low-IQ control group on an untimed drawing task and were equivalent to the TD control group on point accuracy and simple reaction time tests. Results suggest that visual motor deficits in 22q11DS are primarily attributable to deficits in psychomotor speed which becomes apparent when tasks are timed versus untimed. Moreover, the integration of visual and motor information may be intact and, indeed, represent a relative strength in 22q11DS when there are no time constraints imposed. While this may have significant implications for cognitive remediation strategies for children with 22q11DS, the relationship between reaction time, visual reasoning, cognitive complexity, fine motor speed and accuracy, and graphomotor ability on visual-motor tasks is still unclear.

  15. Experiments on studying beryllium - steam interaction, determination of oxidated beryllium emissivity factor

    International Nuclear Information System (INIS)

    The report presents results of beryllium emissivity factor measurements within 700-1300 K temperature range. The tests were conducted at Institute of Atomic Energy of the National Nuclear Center of the Republic of Kazakhstan to receive experimental data for verification of calculation programs describing an accident involving water coolant discharge into ITER reactor vacuum cavity. (author)

  16. Ionization energies of beryllium in strong magnetic fields

    Institute of Scientific and Technical Information of China (English)

    GUANXiao-xu; ZHANGYue-xia

    2004-01-01

    We have develop an effective frozen core approximation to calculate energy levels and ionization enegies of the beryllium atom in magnetic field strengths up to 2.35 × 105T. Systematic improvement over the Hartree-Fock results for the beryllium low-lying states has been accomplished.

  17. 10 CFR 850.20 - Baseline beryllium inventory.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Baseline beryllium inventory. 850.20 Section 850.20 Energy... Baseline beryllium inventory. (a) The responsible employer must develop a baseline inventory of the... inventory, the responsible employer must: (1) Review current and historical records; (2) Interview...

  18. Joining of beryllium by braze welding technique: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Banaim, P.; Abramov, E. [Ben-Gurion Univ. of the Negev, Beersheba (Israel); Zalkind, S.; Eden, S.

    1998-01-01

    Within the framework of some applications, there is a need to join beryllium parts to each other. Gas Tungsten Arc Braze Welds were made in beryllium using 0.3 mm commercially Aluminum (1100) shim preplaced at the joint. The welds exhibited a tendency to form microcracks in the Fusion Zone and Heat Affected Zone. All the microcracks were backfilled with Aluminum. (author)

  19. Failure analysis of beryllium tile assembles following high heat flux testing for the ITER program

    International Nuclear Information System (INIS)

    The following document describes the processing, testing and post-test analysis of two Be-Cu assemblies that have successfully met the heat load requirements for the first wall and dome sections for the ITER (International Thermonuclear Experimental Reactor) fusion reactor. Several different joint assemblies were evaluated in support of a manufacturing technology investigation aimed at diffusion bonding or brazing a beryllium armor tile to a copper alloy heat sink for fusion reactor applications. Judicious selection of materials and coatings for these assemblies was essential to eliminate or minimize interactions with the highly reactive beryllium armor material. A thin titanium layer was used as a diffusion barrier to isolate the copper heat sink from the beryllium armor. To reduce residual stresses produced by differences in the expansion coefficients between the beryllium and copper, a compliant layer of aluminum or aluminum-beryllium (AlBeMet-150) was used. Aluminum was chosen because it does not chemically react with, and exhibits limited volubility in, beryllium. Two bonding processes were used to produce the assemblies. The primary process was a diffusion bonding technique. In this case, undesirable metallurgical reactions were minimized by keeping the materials in a solid state throughout the fabrication cycle. The other process employed an aluminum-silicon layer as a brazing filler material. In both cases, a hot isostatic press (HIP) furnace was used in conjunction with vacuum-canned assemblies in order to minimize oxidation and provide sufficient pressure on the assemblies for full metal-to-metal contact and subsequent bonding. The two final assemblies were subjected to a suite of tests including: tensile tests and electron and optical metallography. Finally, high heat flux testing was conducted at the electron beam testing system (EBTS) at Sandia National Laboratories, New Mexico. Here, test mockups were fabricated and subjected to normal heat loads to

  20. Preparation and characterization of beryllium doped organic plasma polymer coatings

    International Nuclear Information System (INIS)

    We report the formation of beryllium doped plasma polymerized coatings derived from a helical resonator deposition apparatus, using diethylberyllium as the organometaric source. These coatings had an appearance not unlike plain plasma polymer and were relatively stable to ambient exposure. The coatings were characterized by Inductively Coupled Plasma Mass Spectrometry and X-Ray Photoelectron Spectroscopy. Coating rates approaching 0.7 μm hr-1 were obtained with a beryllium-to-carbon ratio of 1:1.3. There is also a significant oxygen presence in the coating as well which is attributed to oxidation upon exposure of the coating to air. The XPS data show only one peak for beryllium with the preponderance of the XPS data suggesting that the beryllium exists as BeO. Diethylberyllium was found to be inadequate as a source for beryllium doped plasma polymer, due to thermal decomposition and low vapor recovery rates

  1. Protection of air in premises and environment against beryllium aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Bitkolov, N.Z.; Vishnevsky, E.P.; Krupkin, A.V. [Research Inst. of Industrial and Marine Medicine, St. Petersburg (Russian Federation)

    1998-01-01

    First and foremost, the danger of beryllium aerosols concerns a possibility of their inhalation. The situation is aggravated with high biological activity of the beryllium in a human lung. The small allowable beryllium aerosols` concentration in air poses a rather complex and expensive problem of the pollution prevention and clearing up of air. The delivery and transportation of beryllium aerosols from sites of their formation are defined by the circuit of ventilation, that forms aerodynamics of air flows in premises, and aerodynamic links between premises. The causes of aerosols release in air of premises from hoods, isolated and hermetically sealed vessels can be vibrations, as well as pulses of temperature and pressure. Furthermore, it is possible the redispersion of aerosols from dirty surfaces. The effective protection of air against beryllium aerosols at industrial plants is provided by a complex of hygienic measures: from individual means of breath protection up to collective means of the prevention of air pollution. (J.P.N.)

  2. Polarizabilities of the beryllium clock transition

    International Nuclear Information System (INIS)

    The polarizabilities of the three lowest states of the beryllium atom are determined from a large basis configuration interaction calculation. The polarizabilities of the 2s21Se ground state (37.73a03) and the 2s2p 3P0o metastable state (39.04a03) are found to be very similar in size and magnitude. This leads to an anomalously small blackbody radiation shift at 300 K of -0.018(4) Hz for the 2s21Se-2s2p 3P0o clock transition. Magic wavelengths for simultaneous trapping of the ground and metastable states are also computed.

  3. Implementation of 5E Inquiry Incorporated with Analogy Learning Approach to Enhance Conceptual Understanding of Chemical Reaction Rate for Grade 11 Students

    Science.gov (United States)

    Supasorn, Saksri; Promarak, Vinich

    2015-01-01

    The main purpose of this study was to enhance student understanding of the scientific concepts of chemical reaction rate. Forty-four grade 11 students were the target group. The treatment tools were seven learning plans of 5E inquiry incorporated with an analogy learning approach during 15 hours of class time. In each learning plan, the students…

  4. Effects of spins and resonance parities of 12C on the mechanism of emission of three alpha particles in the 11B (p, 3 α) reaction

    International Nuclear Information System (INIS)

    This research thesis reports the study of the mechanism of emission of alpha particles in the 11B (p, 3 α) reaction with respect to the effects of spins and parities of the various resonances met between 150 keV and 4 MeV. From an experimental point of view, the reaction has been studied by two methods: the detection of alpha particles by a semiconductor-based counter located at a given angle with respect to the beam direction and study of continuous spectra of alpha particles with respect to projectile energies, and recording, for a given resonance, of alpha-alpha coincidences by using the multi-parametric technique with two semiconductor-based sensors with a varying relative angular position. After a discussion of the main characteristics of resonance and of the mechanism of emission of alpha particles, the author first reports the theoretical study of a reaction producing three particles in the final state, and then reports the theoretical calculation of direct alpha spectrum shapes in the case of the 11B (p, 3 α) reaction (statistic hypothesis, hypothesis of interaction with two particles in the final state). The next part reports the experimental study of the 11B (p, 3 α) reaction

  5. Conceptual design of the beryllium rotating target for the ESS-Bilbao facility

    Energy Technology Data Exchange (ETDEWEB)

    Terrón, S., E-mail: santiago.terron@essbilbao.org [ESS-Bilbao, Parque Tecnológico Bizkaia, Laida Bidea, Edificio 207 B Planta Baja. 48160 Derio (Spain); Instituto de Fusión Nuclear - UPM, ETS Ingenieros Industriales, C José Gutiérrez Abascal, 2, 28006 Madrid (Spain); Sordo, F.; Magán, M.; Ghiglino, A.; Martínez, F.; Vicente, P.J. de; Vivanco, R. [ESS-Bilbao, Parque Tecnológico Bizkaia, Laida Bidea, Edificio 207 B Planta Baja. 48160 Derio (Spain); Instituto de Fusión Nuclear - UPM, ETS Ingenieros Industriales, C José Gutiérrez Abascal, 2, 28006 Madrid (Spain); Thomsen, K. [Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Perlado, J.M. [Instituto de Fusión Nuclear - UPM, ETS Ingenieros Industriales, C José Gutiérrez Abascal, 2, 28006 Madrid (Spain); Bermejo, F.J. [Instituto de Estructura de la Materia, IEM-CSIC, Consejo Superior de Investigaciones Científicas, Serrano 123, 28006 Madrid (Spain); ESS-Bilbao, Parque Tecnológico Bizkaia, Laida Bidea, Edificio 207 B Planta Baja. 48160 Derio (Spain); Abánades, A. [Instituto de Fusión Nuclear - UPM, ETS Ingenieros Industriales, C José Gutiérrez Abascal, 2, 28006 Madrid (Spain)

    2013-10-01

    The ESS-Bilbao facility, hosted by the University of the Basque Country (UPV/EHU), envisages the operation of a high-current proton accelerator delivering beams with energies up to 50 MeV. The time-averaged proton current will be 2.25 mA, delivered by 1.5 ms proton pulses with a repetition rate of 20 Hz. This beam will feed a neutron source based upon the Be (p,n) reaction, which will enable the provision of relevant neutron experimentation capabilities. The neutron source baseline concept consists in a rotating beryllium target cooled by water. The target structure will comprise a rotatable disk made of 6061-T6 aluminium alloy holding 20 beryllium plates. Heat dissipation from the target relies upon a distribution of coolant-flow channels. The practical implementation of such a concept is here described with emphasis put on the beryllium plates thermo-mechanical optimization, the chosen coolant distribution system as well as the mechanical behavior of the assembly. -- Highlights: • The conceptual design of ESS-Bilbao neutron production target has been carried out. • This device is a rotating disk holding Be elements cooled by water. • Thermo-mechanical and lifespan behavior of the Be elements have been analyzed. • Disk structure ensures coolability and a proper mechanical behavior of the assembly.

  6. A Ga2O·11Al2O3 nanonet prepared by interfacial reaction growth approach and its application in fabricating GaN nanowires

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A Ga2O·11Al2O3 nanonet was synthesized by using Ga2O3 powder as the precursor to generate Ga2O vapor in H2 atmosphere which further reacted with Al2O3 at 730 °C to form Ga2O·11Al2O3 at the interfaces of a porous anodic aluminum oxide (AAO) template. The prepared Ga2O·11Al2O3 nanonet then served as a Ga2O-stablizing reservoir to fabricate single crystal GaN nanowires. The residual Ga2O3 powder at the surface of the produced Ga2O·11Al2O3 nanonet and the metallic Ga or Ga2O from the Ga2O·11Al2O3 decomposition reacted with ammonia to yield GaN nanowires at 780 °C. The reaction mechanisms were investigated.

  7. Indirect study of {sup 11}B(p,alpha{sub 0}){sup 8}Be and {sup 10}B(p,alpha){sup 7}Be reactions at astrophysical energies by means of the Trojan Horse Method: recent results

    Energy Technology Data Exchange (ETDEWEB)

    Lamia, L.; Puglia, S.M.R.; Spitaleri, C.; Romano, S. [Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Metodologie Fisiche e Chimiche per l' Ingegneria, Universita di Catania, Catania (Italy); Del Santo, M. Gimenez; Carlin, N.; Munhoz, M. Gameiro [Departamento de Fisica Nuclear, Universitade de Sao Paulo, Sao Paulo (Brazil); Cherubini, S. [Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Metodologie Fisiche e Chimiche per l' Ingegneria, Universita di Catania, Catania (Italy); Kiss, G.G. [Laboratori Nazionali del Sud, Catania (Italy); Atomki, Debrecen (Hungary); Kroha, V. [Institute for Nuclear Physics, Prague (Czech Republic); Kubono, S. [CNS, University of Tokyo, Tokyo (Japan); La Cognata, M. [Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Metodologie Fisiche e Chimiche per l' Ingegneria, Universita di Catania, Catania (Italy); Centro Siciliano di Fisica Nucleare e Struttura della Materia, Catania (Italy); Li Chengbo [China Institute of Atomic Energy, Department of Physics, Beijing (China); Pizzone, R.G. [Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Metodologie Fisiche e Chimiche per l' Ingegneria, Universita di Catania, Catania (Italy); Wen Qungang [China Institute of Atomic Energy, Department of Physics, Beijing (China); Sergi, M.L. [Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Metodologie Fisiche e Chimiche per l' Ingegneria, Universita di Catania, Catania (Italy); Centro Siciliano di Fisica Nucleare e Struttura della Materia, Catania (Italy); Szanto de Toledo, A. [Departamento de Fisica Nuclear, Universitade de Sao Paulo, Sao Paulo (Brazil); Wakabayashi, Y. [CNS, University of Tokyo, Tokyo (Japan); Advanced Science Research Center - JAEA - Ibaraki (Japan); Yamaguchi, H. [CNS, University of Tokyo, Tokyo (Japan); Zhou Shuhua [China Institute of Atomic Energy, Department of Physics, Beijing (China)

    2010-03-01

    Nuclear (p,alpha) reactions destroying the so-called 'light-elements' lithium, beryllium and boron have been largely studied in the past mainly because their role in understanding some astrophysical phenomena, i.e. mixing-phenomena occurring in young F-G stars [A.M. Boesgaard et al., Astr. Phys. J, 991, 2005, 621]. Such mechanisms transport the surface material down to the region close to the nuclear destruction zone, where typical temperatures of the order of approx10{sup 6} K are reached. The corresponding Gamow energy E{sub 0}=1.22(Z{sub x}{sup 2}Z{sub X}{sup 2}T{sub 6}{sup 2}){sup 1/3} keV [C. Rolfs and W. Rodney, 'Cauldrons in the Cosmos', The Univ. of Chicago press, 1988] is about approx10 keV if one considers the 'boron-case' and replaces in the previous formula Z{sub x}=1, Z{sub X}=5 and T{sub 6}=5. Direct measurements of the two {sup 11}B(p,alpha{sub 0}){sup 8}Be and {sup 10}B(p,alpha){sup 7}Be reactions in correspondence of this energy region are difficult to perform mainly because the combined effects of Coulomb barrier penetrability and electron screening [H.J. Assenbaum, K. Langanke and C. Rolfs, Z. Phys., 327, 1987, 461]. The indirect method of the Trojan Horse (THM) [G. Baur et al., Phys. Lett. B, 178, 1986, 135; G. Calvi et al., Nucl. Phys. A, 621, 1997, 139; C. Spitaleri et al., Phys. Rev. C, 493, 1999, 206] allows one to extract the two-body reaction cross section of interest for astrophysics without the extrapolation-procedures. Due to the THM formalism, the extracted indirect data have to be normalized to the available direct ones at higher energies thus implying that the method is a complementary tool in solving some still open questions for both nuclear and astrophysical issues [S. Cherubini et al., Astr. Phys. J, 457, 1996, 855; C. Spitaleri et al., Phys. Rev. C, 63, 2001, 005801; C. Spitaleri et al., Phys. Rev. C, 63, 2004, 055806; A. Tumino et al., Phys. Rev. Lett., 98, 2007, 252502; M. La Cognata et al., Phys

  8. Assessment of the feasibility and advantages of beryllium recycling

    International Nuclear Information System (INIS)

    This paper proposes a generic route for the recycling of beryllium from fusion reactors, based on critical issues associated with beryllium pebbles after their service life in the HCPB breeding blanket. These critical issues are the high tritium inventory, the presence of long-lived radionuclides (among which transuranics due to traces of uranium in the base metal), and the chemical toxicity of beryllium. On the basis of the chemical and radiochemical characteristics of the neutron irradiated beryllium pebbles, we describe a possible recycling route. The first step is the detritiation of the material. This can be achieved by heating the pebbles to 800 oC under an argon flow. The argon gas avoids oxidation of the beryllium, and at the proposed temperature the tritium inventory is readily released from the pebbles. In a second step, the released tritium can be oxidised on a copper oxide bed to produce tritiated water, which is consistent with the current international strategy to convert all kinds of tritiated waste into tritiated water, which can subsequently be treated in a water detritiation plant. Removal of radionuclides from the beryllium pebbles may be achieved by several types of chloride processes. The first step is to pass chlorine gas (in an argon flow) over the pebbles, thus yielding volatile BeCl2. This beryllium chloride can then be purified by fractional distillation. As a small fraction of the beryllium chloride contains the long-lived 10Be isotope, 10BeCl2 has to be separated from 9BeCl2, which could be achieved by centrifugal techniques. The product can then be reduced to obtain high-purity metallic beryllium. Two candidate reduction methods were identified: fused salt electrolysis and thermal decomposition. Both these methods require laboratory parametric studies to maximise the yield and achieve a high purity metal, before either process can be upgraded to a larger scale. The eventual product of the chloride reduction process must be a high purity

  9. Physical properties of beryllium oxide - Irradiation effects

    International Nuclear Information System (INIS)

    This work has been carried out in view of determining several physical properties of hot-pressed beryllium oxide under various conditions and the change of these properties after irradiation. Special attention has been paid on to the measurement of the thermal conductivity coefficient and thermal diffusivity coefficient. Several designs for the measurement of the thermal conductivity coefficient have been achieved. They permit its determination between 50 and 300 deg. C, between 400 and 800 deg. C. Some measurements have been made above 1000 deg. C. In order to measure the thermal diffusivity coefficient, we heat a perfectly flat surface of a sample in such a way that the heat flux is modulated (amplitude and frequency being adjustable). The thermal diffusivity coefficient is deduced from the variations of temperature observed on several spots. Tensile strength; compressive strength; expansion coefficient; sound velocity and crystal parameters have been also measured. Some of the measurements have been carried out after neutron irradiation. Some data have been obtained on the change of the properties of beryllium oxide depending on the integrated neutron flux. (author)

  10. Beryllium containing plasma interactions with ITER materials

    International Nuclear Information System (INIS)

    A beryllium-seeded deuterium plasma is used in PISCES-B to investigate mixed-material erosion and redeposition properties of ITER relevant divertor materials. The beryllium containing plasma simulates the erosion of first wall material into the ITER sol plasma and its subsequent flow toward the carbon divertor plates. The experiments are designed to quantify the behavior of plasma created mixed Be/C and Be/W surfaces. Developing an understanding of the mixed material surface behavior is crucial to accurately predicting the tritium accumulation rate within the ITER vacuum vessel. The temporal evolution of the plasma interactions with the various mixed surfaces are examined to better understand the fundamental mechanisms in play at the surface and to allow scaling of these results to the conditions expected in the ITER divertor. A new periodic heat pulse deposition system is also installed on PISCES-B to simulate the transient temperature excursions of surfaces expected to occur in the ITER divertor during ELMs and other off-normal events. These periodically applied heat pulses allow us to study the effects of transient power loading on the formation, stability and tritium content of mixed-material surfaces that are created during the experiments. (author)

  11. Synthesis of New Pentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (PCU) Cyanosilylated Derivatives Using Sulphated Zirconia and Hydrotalcite as Catalysts in Microwave-Assisted Reactions under Solvent Free Conditions

    OpenAIRE

    Juan Navarrete-Bolaños; Rubén Gaviño-Ramírez; Eduardo González-Zamora; Leticia Lomas-Romero; Guillermo E. Negrón-Silva; Deyanira Angeles-Beltrán; Laura Nadxieli Palacios-Grijalva; Nahí Adriana Guerra-Navarro

    2011-01-01

    A comparison was made of the effectiveness of the functionalization reactions of pentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (PCU) using sulphated zirconia in protection-deprotection reactions and Mg/Al hydrotalcite in a cyanosilylation reaction, under classical thermal conditions and imposing microwave radiation; improved yields and reaction times were considered.

  12. Synthesis of New Pentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (PCU Cyanosilylated Derivatives Using Sulphated Zirconia and Hydrotalcite as Catalysts in Microwave-Assisted Reactions under Solvent Free Conditions

    Directory of Open Access Journals (Sweden)

    Juan Navarrete-Bolaños

    2011-08-01

    Full Text Available A comparison was made of the effectiveness of the functionalization reactions of pentacyclo[5.4.0.02,6.03,10.05,9]undecane-8,11-dione (PCU using sulphated zirconia in protection-deprotection reactions and Mg/Al hydrotalcite in a cyanosilylation reaction, under classical thermal conditions and imposing microwave radiation; improved yields and reaction times were considered.

  13. A New Target Design with a Beryllium Multiplier for a Lead Slowing Down Time Spectrometer (LSDTS) System

    International Nuclear Information System (INIS)

    In order to quantify fissile isotopes in the spent nuclear fuel or the recycled nuclear material, a lead slowing down time spectrometer (LSDTS) system has been investigated and developed. Among several components of LSDTS, a highly intense neutron should be produced in the system to overcome the background neutrons from spontaneous fission in the curium isotopes. Thus a thin and plate target is designed using tantalum based on the successive reactions such as a bremmstrahlung conversion (e,g) and a photoneutron production (g,n). The beam energy of incident electrons is as high as 35 MeV in LSDTS system, which will decrease in the lead medium after interaction with target. It is known that the higher energy than 5 MeV is enough to produce neutrons for light elements such as beryllium and deuterium Beryllium is widely used as a reflector due to its good characteristics of neutron scattering. Above all, a neutron multiplier is a good choice for beryllium especially in a fusion facility based on the following chain reaction, Be-9 + n (>2MeV) -> 2 He-4 + 2n -1.666 MeV and the cross section is as high as about 580 mb. Using the above application, a beryllium plate is installed on back side of tantalum target in order to multiply neutrons emitting from the target. Furthermore, some sensitivity tests are carried out by changing the thickness of beryllium plate. As a computing tool, MCNPX-2.5 code, a popular Monte Carlo three dimensional code, is taken into consideration

  14. SU-E-T-602: Beryllium Seeds Implant for Photo-Neutron Yield Using External Beam Therapy

    International Nuclear Information System (INIS)

    Purpose: To evaluate the Neutron yield obtained during prostate external beam irradiation. Methods: Neutrons, that are commonly a radiation safety concern for photon beams with energy above 10 MV, are induced inside a PTV from Beryllium implemented seeds. A high megavoltage photon beam delivered to a prostate will yield neutrons via the reaction Be-9(γ,n)2?. Beryllium was chosen for its low gamma,n reaction cross-section threshold (1.67 MeV) to be combined with a high feasible 25 MV photon beam. This beam spectra has a most probable photon energy of 2.5 to 3.0 MeV and an average photon energy of about 5.8 MeV. For this feasibility study we simulated a Beryllium-made common seed dimension (0.1 cm diameter and 0.5 cm height) without taking into account encapsulation. We created a 0.5 cm grid loading pattern excluding the Urethra, using Variseed (Varian inc.) A total of 156 seeds were exported to a 4cm diameter prostate sphere, created in Fluka, a particle transport Monte Carlo Code. Two opposed 25 MV beams were simulated. The evaluation of the neutron dose was done by adjusting the simulated photon dose to a common prostate delivery (e.g. 7560 cGy in 42 fractions) and finding the corresponding neutron dose yield from the simulation. A variance reduction technique was conducted for the neutrons yield and transported. Results: An effective dose of 3.65 cGy due to neutrons was found in the prostate volume. The dose to central areas of the prostate was found to be about 10 cGy. Conclusion: The neutron dose yielded does not justify a clinical implant of Beryllium seeds. Nevertheless, one should investigate the Neutron dose obtained when a larger Beryllium loading is combined with commercially available 40 MeV Linacs

  15. Turbulent dynamics of beryllium seeded plasmas at the Edge of tokamaks

    International Nuclear Information System (INIS)

    Numerical simulation of turbulent MHD dynamics of beryllium seeded plasmas at the edge of tokamaks is performed. The model is based on the 4-fluid diameter, n, pe, pi reduced nonlinear Braginsky's MHD equations. Neutral hydrogen flow from the wall is described with a diffusion model. Beryllium line radiation is taken into consideration. The Be ion distribution over ionization states is calculated using the reduced model. Electron impact ionization, three body, photo- and dielectronic recombination and charge-exchange with neutral hydrogen are taken into account. Coronal equilibrium is not supposed. Simulations are performed for T-10 parameters. Radial distributions of averaged temperatures and their fluctuation levels, species flows, impurity radiation power, and impurity ions concentrations are obtained as functions of the Be concentration at the wall. The impurity radiation is shown to act on the turbulent oscillation level significantly if the total Be concentration at the wall exceeds 3.10 11 cm-3. The impurity turbulent transversal flow is directed inward and exceeds neoclassical flow significantly. The parallel conductivity and, as a consequence, turbulent transport are increased significantly by impurity radiation. The radiation loss dependence on the neutral Hydrogen concentration at the wall is also examined. The hydrogen concentration increasing the plasma density also rises. The relative beryllium concentration decreases. In total, these two effects are compensated, and the level of radiation losses is changed insignificantly (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. ICRF heating/plasma edge interaction in JET with beryllium gettering

    International Nuclear Information System (INIS)

    During Ion Cyclotron Range of Frequencies (ICRF) heating in JET (Joint European Torus) with beryllium gettered walls and RF antenna screens both the global and local impurity influxes are significantly reduced as compared to the previous operation. In particular oxygen is reduced by an order of magnitude and the deuterium is efficiently pumped. The deuterium recycling RD D eff = 2 at PRF = 10 MW is routinely achieved. At comparable densities, PRAD/PTOT is 30-50% lower. If we assume that the long term evolution of the beryllium signal at the antenna screen is due to erosion, rather than coverage by carbon, we estimate the corresponding influx in monopole configuration (kII=0 m-1) to be ΦBeSCREEN = 1.16 x 1019 atoms MW-1 s-1 from an effective area AEFF = 0.5 m2. At the same coupling resistance the beryllium influx scales with the RF power of the antenna and with the plasma density. With dipoles (k11=7 m-1), the influx is reduced by more than a factor 3. The contribution of antenna influxes to Zeff is small, ΔZeffBe = 0.08 and ΔZeffNi = 0.05 at PRF = 5 MW. (orig.)

  17. Fluorimetric method for determination of Beryllium; Determinazione fluorimetrica del berillio

    Energy Technology Data Exchange (ETDEWEB)

    Sparacino, N.; Sabbioneda, S. [ENEA, Centro Ricerche Saluggia, Vercelli (Italy). Dip. Energia

    1996-10-01

    The old fluorimetric method for the determination of Beryllium, based essentially on the fluorescence of the Beryllium-Morine complex in a strongly alkaline solution, is still competitive and stands the comparison with more modern methods or at least three reasons: in the presence of solid or gaseous samples (powders), the times necessary to finalize an analytic determination are comparable since the stage of the process which lasts the longest is the mineralization of the solid particles containing Beryllium, the cost of a good fluorimeter is by far Inferior to the cost, e. g., of an Emission Spectrophotometer provided with ICP torch and magnets for exploiting the Zeeman effect and of an Atomic absorption Spectrophotometer provided with Graphite furnace; it is possible to determine, fluorimetrically, rather small Beryllium levels (about 30 ng of Beryllium/sample), this potentiality is more than sufficient to guarantee the respect of all the work safety and hygiene rules now in force. The study which is the subject of this publication is designed to the analysis procedure which allows one to reach good results in the determination of Beryllium, chiefly through the control and measurement of the interference effect due to the presence of some metals which might accompany the environmental samples of workshops and laboratories where Beryllium is handled, either at the pure state or in its alloys. The results obtained satisfactorily point out the merits and limits of this analytic procedure.

  18. Investigations of the thermal and radiochemical reaction characteristics of 1,1-diphenyl-2-picryl-hydrazyl (DPPH)

    International Nuclear Information System (INIS)

    The author investigated the reaction mechanisms of DPPH when used as a scavenger in hologenated hydrocarbons. The mechanisms of the thermal reacton of DPPH with nitrogen dioxide, chlorine and fluorine are described. In the radiochemical reactions, extinction/dose curves were recorded, and radical yields were determined for 18 different hydrocarbon ESR and mass spectrometry were used, sometimes in combination with HPLC. (LU)

  19. Development of Beryllium Vacuum Chamber Technology for the LHC

    CERN Document Server

    Veness, R; Dorn, C

    2011-01-01

    Beryllium is the material of choice for the beam vacuum chambers around collision points in particle colliders due to a combination of transparency to particles, high specific stiffness and compatibility with ultra-high vacuum. New requirements for these chambers in the LHC experiments have driven the development of new methods for the manufacture of beryllium chambers. This paper reviews the requirements for experimental vacuum chambers. It describes the new beryllium technology adopted for the LHC and experience gained in the manufacture and installation.

  20. Analysis of surface contaminants on beryllium and aluminum windows

    International Nuclear Information System (INIS)

    An effort has been made to document the types of contamination which form on beryllium windows surfaces due to interaction with a synchrotron radiation beam. Beryllium windows contaminated in a variety of ways (exposure to water and air) exhibited surface powders, gels, crystals and liquid droplets. These contaminants were analyzed by electron diffraction, electron energy loss spectroscopy, energy dispersive X-ray spectroscopy and wet chemical methods. Materials found on window surfaces include beryllium oxide, amorphous carbon, cuprous oxide, metallic copper and nitric acid. Aluminum window surface contaminants were also examined. (orig.)

  1. Beryllium Health and Safety Committee Data Reporting Task Force

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, D H

    2007-02-21

    On December 8, 1999, the Department of Energy (DOE) published Title 10 CFR 850 (hereafter referred to as the Rule) to establish a chronic beryllium disease prevention program (CBDPP) to: {sm_bullet} reduce the number of workers currently exposed to beryllium in the course of their work at DOE facilities managed by DOE or its contractors, {sm_bullet} minimize the levels of, and potential for, expos exposure to beryllium, and {sm_bullet} establish medical surveillance requirements to ensure early detection of the disease.

  2. Dynamical Dipole mode in the 40,48 Ca +152,144Sm fusion reactions at 11 MeV/nucleon

    Directory of Open Access Journals (Sweden)

    Parascandolo C.

    2016-01-01

    Full Text Available The excitation of the dynamical dipole mode along the fusion path was investigated in the formation of a heavy compound nucleus in the A=190 mass region. To form the compound nucleus, the 40Ca + 152Sm and 48Ca + 144Sm reactions were employed at Elab=11 and 10.1 MeV/nucleon, respectively. Both fusion–evaporation and fission events were studied simultaneously for the first time. Our results for evaporation and fission events (preliminary show that the dynamical dipole mode survives in reactions involving heavier nuclei than those studied previously.

  3. Particle production at high baryon density in central Au+Au reactions at 11.6A GeV/c

    International Nuclear Information System (INIS)

    Semi-inclusive proton and pion distributions from central Au+Au reactions at 11.6A GeV/c have been measured. The proton rapidity distribution shows significantly increased stopping compared to lighter systems, providing strong evidence for the formation of a state of matter with baryon density substantially greater than normal nuclear matter. Unlike reactions at this energy induced by lighter heavy ions, at low mt-m0 the proton invariant spectra deviate from a single exponential shape and become flatter, while π- spectra are found to rise faster than the π+ spectra. copyright 1998 The American Physical Society

  4. High-Pressure/High-Temperature Studies of the Low-Z materials - Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Evans, W J; Cynn, H

    2006-03-02

    The high-pressure/temperature phase diagrams of materials are largely unexplored. Combined laser heating/x-ray diffraction capabilities applied to diamond anvil cell experiment provide unique opportunities to study materials over a broad range of temperature (several 1000 K's) and pressure (several 100 GPa's). Of particular interest are high temperature phase transitions including solid-solid and melting transitions in geophysically and technologically important systems. Data derived from these experiments serve to extend our scientific understanding of materials and evaluate theoretical predictions. Using the laser heating (LH) and angle dispersive x-ray diffraction (ADXD) capabilities at BL10XU at SPring-8, we have studied several materials at high-pressure/temperature. This report will summarize results of our studies of solid-solid and melting transitions of beryllium at high pressures and high temperatures. The phase diagram of beryllium is largely unexplored, and the limited data that is available relies on indirect means to establish phase lines and phase transitions (see figure 1)[1]. At ambient pressure an hcp-bcc phase transition has been observed at 1523 K with a subsequent melt transition at 1551 K. Using electrical conductivity, Francois and Contre[2] inferred that the hcp-bcc phase line had a negative slope with pressure. It should be noted that this was established using indirect evidence, and the bcc phase was not definitively identified using, for example, x-ray diffraction. Many subsequent studies have searched for the extension of this phase line, but have failed to find the hcp-bcc transition at room temperature up to pressures approaching 200 GPa[1]. The goal of our studies at BL10XU/SPring-8 was to identify stronger evidence for this hcp-bcc phase line, extend the pressure range and measure the lattice parameters at high pressure. Laser-heated angle-dispersive x-ray diffraction studies of beryllium at high pressures are challenging

  5. Compatibility of refractory metals and beryllium with molten Pb-17Li

    International Nuclear Information System (INIS)

    The compatibility of V, Nb, Ta, Mo, W and Re with static eutectic mixture Pb-17Li was investigated experimentally. All these metals are very stable in the eutectic up to 600 C. Dissolution rates as well as solubilities are low. Below 600 C, a chemical reaction zone caused by initiation of an intergranular corrosion was observed. There was a strong isothermal mass transfer to the crucible wall. Diffusion coefficients for vanadium were calculated. They are in the expected range. The behaviour of beryllium is included in this paper for comparison. Diffusion coefficients were determined. In spite of low dissolution rates a strong intergranular corrosion causes destruction of this metal. (orig.)

  6. Thermochemical study of gaseous oxy salts. Communication 8. Beryllium molybdate and tungstates

    International Nuclear Information System (INIS)

    Gaseous phase reactions involving beryllium molybdate and tungstates were studied by the method of high-temperature mass-spectroscopy. Standard formation enthalpies of BeMoO3, BeWO3, BeWO4 and Be2WO4 were determined, being equal to -432.4 ± 3.1, -424.1 ± 3.7, -794.9 ± 5.2, -973.4 ± 6.7 kJ/mol respectively. Atomization enthalpy of the salts at 298 K amounts to 2162 ± 5, 2347 ± 5, 2967 ± 7, 3470 ± 8 kJ/mol

  7. Stellar abundances of beryllium and CUBES

    CERN Document Server

    Smiljanic, R

    2014-01-01

    Stellar abundances of beryllium are useful in different areas of astrophysics, including studies of the Galactic chemical evolution, of stellar evolution, and of the formation of globular clusters. Determining Be abundances in stars is, however, a challenging endeavor. The two Be II resonance lines useful for abundance analyses are in the near UV, a region strongly affected by atmospheric extinction. CUBES is a new spectrograph planned for the VLT that will be more sensitive than current instruments in the near UV spectral region. It will allow the observation of fainter stars, expanding the number of targets where Be abundances can be determined. Here, a brief review of stellar abundances of Be is presented together with a discussion of science cases for CUBES. In particular, preliminary simulations of CUBES spectra are presented, highlighting its possible impact in investigations of Be abundances of extremely metal-poor stars and of stars in globular clusters.

  8. Beryllium reflector elements for PARR-1

    International Nuclear Information System (INIS)

    The LEU fuel of PARR-1 was designed for a discharge burnup of 35% of initial /sup 235/U loading. Recently some of the fuel elements have been discharged from the PARR-1 core after attaining the burnup closed to the design value. These fuel elements were discharged due to diminished excess reactivity although they were physically intact. After satisfactory performance of these fuel elements there has been a desire to explore the possibility of enhancing the discharge burnup by boosting up the core reactivity. Use of better reflector elements is one of the methods to obtain this goal. In this report properties of various reflector elements have been compared and it is found that use of Beryllium metal reflector elements may be a promising choice for this purpose. (author)

  9. Investigation of the ion beryllium surface interaction

    Energy Technology Data Exchange (ETDEWEB)

    Guseva, M.I.; Birukov, A.Yu.; Gureev, V.M. [RRC Kurchatov Institute, Moscow (Russian Federation)] [and others

    1995-09-01

    The self -sputtering yield of the Be was measured. The energy dependence of the Be self-sputtering yield agrees well with that calculated by W. Eckstein et. al. Below 770 K the self-sputtering yield is temperature independent; at T{sub irr}.> 870 K it increases sharply. Hot-pressed samples at 370 K were implanted with monoenergetic 5 keV hydrogen ions and with a stationary plasma (flux power {approximately} 5 MW/m{sup 2}). The investigation of hydrogen behavior in beryllium shows that at low doses hydrogen is solved, but at doses {ge} 5x10{sup 22} m{sup -2} the bubbles and channels are formed. It results in hydrogen profile shift to the surface and decrease of its concentration. The sputtering results in further concentration decrease at doses > 10{sup 25}m{sup -2}.

  10. Advances in beryllium powder consolidation simulations

    International Nuclear Information System (INIS)

    A fuzzy logic based multiobjective genetic algorithm (GA) is introduced and the algorithm is used to optimize micromechanical densification modeling parameters for warm isopressed beryllium powder, HIPed copper powder and CIPed/sintered and HIPed tantalum powder. In addition to optimizing the main model parameters using the experimental data points as objective functions, the GA provides a quantitative measure of the sensitivity of the model to each parameter, estimates the mean particle size of the powder, and determines the smoothing factors for the transition between stage 1 and stage 2 densification. While the GA does not provide a sensitivity analysis in the strictest sense, and is highly stochastic in nature, this method is reliable and reproducible in optimizing parameters given any size data set and determining the impact on the model of slight variations in each parameter

  11. Age hardening in beryllium-aluminum-silver alloys

    International Nuclear Information System (INIS)

    Three different alloys of beryllium-aluminum-silver were processed to powder by centrifugal atomization in a helium atmosphere. Alloy compositions were, by weight percent, Be-47.5Al-2.5Ag, Be-47Al-3Ag, and Be-46Al-4Ag. Due to the low solubility of both aluminum and silver in beryllium, the silver was concentrated in the aluminum phase, which separates from the beryllium in the liquid phase. A fine, continuous composite beryllium-aluminum microstructure was formed, which did not significantly change after hot isostatic pressing. Samples of hot isostatically pressed material were solution treated at 550 C for 1 h, followed by a water quench. Aging temperatures were 150, 175, 200, and 225 C for times ranging from half an hour to 65 h. Results indicate that peak hardness was reached in 36--40 h at 175 C and 12--16 h at 200 C aging temperature, relatively independent of alloy composition

  12. Design alternatives for cryogenic beryllium windows in an ICF cryostat

    International Nuclear Information System (INIS)

    We propose three backup design options for the cryogenic beryllium windows in a cryostat. The first, a beryllium flange option, reduces peak tensile stresses to 1/3 of that in the original design. The second, a fiberglass flange option, reduces peak tensile stresses to 1/2 of that in the original design and is also low cost. A third option, replacing the beryllium windows with spherical Mylar caps, would require a development program. Even though Mylar has been used previously at cryogenic temperature, this option is still considered unreliable. The near-zero ductility of beryllium at cryogenic temperature makes the reduction of peak tensile stresses particularly desirable. The orginal window design did function satisfactorily and the backup options were not needed. However, these options remain open for possible incorporation in future cryostat designs

  13. New facility for post irradiation examination of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, Etsuo; Kawamura, Hiroshi [Oarai Research Establishment, Ibaraki-Ken (Japan)

    1995-09-01

    Beryllium is expected as a neutron multiplier and plasma facing materials in the fusion reactor, and the neutron irradiation data on properties of beryllium up to 800{degrees}C need for the engineering design. The acquisition of data on the tritium behavior, swelling, thermal and mechanical properties are first priority in ITER design. Facility for the post irradiation examination of neutron irradiated beryllium was constructed in the hot laboratory of Japan Materials Testing Reactor to get the engineering design data mentioned above. This facility consist of the four glove boxes, dry air supplier, tritium monitoring and removal system, storage box of neutron irradiated samples. Beryllium handling are restricted by the amount of tritium;7.4 GBq/day and {sup 60}Co;7.4 MBq/day.

  14. Palladium-Catalyzed One-Pot Reaction of Hydrazones, Dihaloarenes, and Organoboron Reagents: Synthesis and Cytotoxic Activity of 1,1-Diarylethylene Derivatives.

    Science.gov (United States)

    Roche, Maxime; Salim, Salim Mmadi; Bignon, Jérôme; Levaique, Hélène; Brion, Jean-Daniel; Alami, Mouad; Hamze, Abdallah

    2015-07-01

    A new three-component assembly reaction between N-tosylhydrazones, dihalogenated arenes, and boronic acids or boronate esters was developed, producing highly substituted 1,1-diarylethylenes in good yields. The two C-C bonds formed through this coupling have been catalyzed by a single Pd-catalyst in a one-pot fashion. It is noted that the one-pot pinacol boronate cross-coupling reaction generally provides products in high yields, offers an expansive substrate scope, and can address a broad range of aryl, styrene, vinyl, and heterocyclic olefinic targets. The scope of this one-pot coupling has been also extended to the synthesis of the 1,1-diarylethylene skeleton of the natural product ratanhine. The new compounds were evaluated for their cytotoxic activity, and this allowed the identification of compound 4ab that exhibits excellent antiproliferative activity in the nanomolar concentration range against HCT116 cancer cell lines. PMID:26036279

  15. Investigation of the neutron pick-up reactions on 10-11B nuclei at the energy of 25 MeV

    International Nuclear Information System (INIS)

    Full text: Investigation of nuclear reactions is the basic source of obtaining of the information about structure of nucleus, its properties and mechanisms of nuclear interaction. The most convenient mean of obtaining such information is investigation of direct reactions which occurs in the peripheral part of a nucleus. There are plenty of works on studying the direct reactions on the boron isotopes, but it should be said that they were mainly carried out at the energies 8 /18 MeV. We have obtained the experimental values of differential cross sections of the reaction (d,t) on the 10B and 11B isotopes at the energy Ed=25 MeV within the angular region 7o - 97o with step 2o on the isochronous cyclotron U-150-M of Institute of Nuclear Physics NNC of Kazakhstan. The statistics in the peaks corresponding to population of the ground states of nuclei 9B and 10B in the reactions 10B(d,t)9B and 11B(d,t)10B is 200-300 events. The (δE-E) - technique was used in the experiments for selection of the reaction products. The analysis of these processes has been carried out using the modified Distorted Wave Born Approximation which includes formalism of the distorted wave method dispersion approaches of the Direct Reaction Theory [1, 2]. For calculation of the distorted waves the optical potentials of interaction in the systems d+10B and d+11B have been used which were obtained from the analysis of deuterons elastic scattering by nuclei 10B and 11B in the energy interval 12 / 28 MeV within the framework of the optical model. The asymptotical normalization coefficients of the overlapping functions as well as the spectroscopic factors for the configurations (n+9B) and (n+10B) have been obtained. Further these data are planned to use for extrapolation of the cross sections of astrophysical radiative neutron capture to the area of very low energies. The Work is executed within the framework of the Project STCU 3081 at financial support of the State Department of USA. (author)

  16. Development of Biomarkers for Chronic Beryllium Disease in Mice

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Terry

    2013-01-25

    Beryllium is a strategic metal, indispensable for national defense programs in aerospace, telecommunications, electronics, and weaponry. Exposure to beryllium is an extensively documented occupational hazard that causes irreversible, debilitating granulomatous lung disease in as much as 3 - 5% of exposed workers. Mechanistic research on beryllium exposure-disease relationships has been severely limited by a general lack of a sufficient CBD animal model. We have now developed and tested an animal model which can be used for dissecting dose-response relationships and pathogenic mechanisms and for testing new diagnostic and treatment paradigms. We have created 3 strains of transgenic mice in which the human antigen-presenting moiety, HLA-DP, was inserted into the mouse genome. Each mouse strain contains HLA-DPB1 alleles that confer different magnitude of risk for chronic beryllium disease (CBD): HLA-DPB1*0401 (odds ratio = 0.2), HLA-DPB1*0201 (odds ratio = 15), HLA-DPB1*1701 (odds ratio = 240). Our preliminary work has demonstrated that the *1701 allele, as predicted by human studies, results in the greatest degree of sensitization in a mouse ear swelling test. We have also completed dose-response experiments examining beryllium-induced lung granulomas and identified susceptible and resistant inbred strains of mice (without the human transgenes) as well as quantitative trait loci that may contain gene(s) that modify the immune response to beryllium. In this grant application, we propose to use the transgenic and normal inbred strains of mice to identify biomarkers for the progression of beryllium sensitization and CBD. To achieve this goal, we propose to compare the sensitivity and accuracy of the lymphocyte proliferation test (blood and bronchoalveolar lavage fluid) with the ELISPOT test in the three HLA-DP transgenic mice strains throughout a 6 month treatment with beryllium particles. Because of the availability of high-throughput proteomics, we will also identify

  17. Optical Potential Parameters for Halo Nucleus System 6He+12C from Transfer Reaction11B (7Li, 6He) 12C

    Institute of Scientific and Technical Information of China (English)

    WU Zhen-Dong; XU Xin-Xing; BAI Chun-Lin; YU Ning; JIA Fei; LIN Cheng-Jian; ZHANG Huan-Qiao; LIU Zu-Hua; YANG Feng; AN Guang-Peng; ZHANG Chun-Lei; ZHANG Gao-Long; JIA Hui-Ming

    2009-01-01

    The optical potential parameters for the halo nucleus system 6He+12 C are extracted from fits to the measured angular distributions of 11B(7 Li, 6He)12C reaction at energies of 18.3 and 28.3 MeV with distorted-wave Born approximation analysis. The characters of the obtained optical potential parameters are basically consistent with the results extracted from the fits to the elastic-scattering angular distributions in the literature.

  18. A review of reaction rates and thermodynamic and transport properties for the 11-species air model for chemical and thermal nonequilibrium calculations to 30000 K

    Science.gov (United States)

    Gupta, Roop N.; Yos, Jerrold M.; Thompson, Richard A.

    1989-01-01

    Reaction rate coefficients and thermodynamic and transport properties are provided for the 11-species air model which can be used for analyzing flows in chemical and thermal nonequilibrium. Such flows will likely occur around currently planned and future hypersonic vehicles. Guidelines for determining the state of the surrounding environment are provided. Approximate and more exact formulas are provided for computing the properties of partially ionized air mixtures in such environments.

  19. K2CO3-Promoted Cascade MichaeI-Alkylation Reactions: A Facile Preparation of Diethyl trans-2,3-Disubstituted 1,1-Cyclopropanedicarboxylates

    Institute of Scientific and Technical Information of China (English)

    YANG Gaosheng; HUA Yuanyuan; SHEN Yue

    2009-01-01

    A cascade Michael-alkylation reaction of diethyl benzylidenemalonates with chloroacetophenones was realized by using K2CO3 as the promoter.With this method,a series of diethyl trans-2,3-disubstituted 1,1-cyclopropanedicarboxylates have been facilely synthesized in moderate yields under mild conditions.The relative configurations of two typical products were confirmed by X-ray crystallographic analysis.

  20. Beryllium foils for windows in counter of nuclear radiation

    International Nuclear Information System (INIS)

    Based on the optimization of the main structural characteristics (grain structure, texture, dislocation substructure) are defined modes of deformation and heat treatment of beryllium foils (purity > 99.95%), providing their excellent mechanical properties and optimized modes of deformation and heat treatment. Analyzed various technological methods rolling foils to their rational use for the practical implementation of the results of the study. It is shown that the strength and plastic properties of the foils beryllium higher than that of similar foils foreign manufacture

  1. Mass asymmetry dependence of fusion time-scales in 11B+237Np and 12C, 16O, 19F+232Th reactions in a dynamical trajectory model

    International Nuclear Information System (INIS)

    Dynamical trajectory calculations were carried out for the reactions of 11B+237Np and 12C, 16O and 19F+232Th, having mass asymmetries on either side of the Businaro-Gallone critical mass asymmetry αBG, in order to examine the mass asymmetry dependence of fusion reactions in these systems. The compound nucleus formation times were calculated as a function of the partial wave of the reaction for all the systems. This study brings out that for systems with αBG, the formation times are significantly larger than for α>αBG, which is caused by the dynamical effects involved in the large scale shape changes taking place in the fusion process as well as due to the interplay between the thermal and the collective motion during the collision process. The calculated time scales are comparable to the experimental values derived from the pre-fission neutron multiplicity measurements. (author). 16 refs., 4 figs., 1 tab

  2. Minor modifications of the C-terminal helix reschedule the favored chemical reactions catalyzed by theta class glutathione transferase T1-1.

    Science.gov (United States)

    Shokeer, Abeer; Mannervik, Bengt

    2010-02-19

    Adaptive responses to novel toxic challenges provide selective advantages to organisms in evolution. Glutathione transferases (GSTs) play a pivotal role in the cellular defense because they are main contributors to the inactivation of genotoxic compounds of exogenous as well as of endogenous origins. GSTs are promiscuous enzymes catalyzing a variety of chemical reactions with numerous alternative substrates. Despite broad substrate acceptance, individual GSTs display pronounced selectivities such that only a limited number of substrates are transformed with high catalytic efficiency. The present study shows that minor structural changes in the C-terminal helix of mouse GST T1-1 induce major changes in the substrate-activity profile of the enzyme to favor novel chemical reactions and to suppress other reactions catalyzed by the parental enzyme. PMID:20022951

  3. The beryllium production at Ulba metallurgical plant (Ust-Kamenogrsk, Kazakhstan)

    Energy Technology Data Exchange (ETDEWEB)

    Dvinskykh, E.M.; Savchuk, V.V.; Tuzov, Y.V. [Ulba Metallurgical Plant (Zavod), Ust-Kamenogorsk, Abay prospect 102 (Kazakhstan)

    1998-01-01

    The Report includes data on beryllium production of Ulba metallurgical plant, located in Ust-Kamenogorsk (Kazakhstan). Beryllium production is showed to have extended technological opportunities in manufacturing semi-products (beryllium ingots, master alloys, metallic beryllium powders, beryllium oxide) and in production of structural beryllium and its parts. Ulba metallurgical plant owns a unique technology of beryllium vacuum distillation, which allows to produce reactor grades of beryllium with a low content of metallic impurities. At present Ulba plant does not depend on raw materials suppliers. The quantity of stored raw materials and semi-products will allow to provide a 25-years work of beryllium production at a full capacity. The plant has a satisfactory experience in solving ecological problems, which could be useful in ITER program. (author)

  4. Study of the break reaction of Be11 on Ti48 target; the towing mode: a spectroscopic tool for the study of nuclei

    International Nuclear Information System (INIS)

    In a towing mode reaction the projectile picks up a nucleon from the target and then breaks up by emitting one nucleon. The velocity of the emitted nucleon is boosted by the projectile velocity, leading to the emission of the nucleon in a narrow cone around the direction of the scattered projectile. This work is dedicated to the towing mode in halo nuclei such as Be11. The experiment was performed at Ganil facility by bombarding a Ti48 target with a 41 MeV per nucleon Be11 beam, the reaction studied is: Ti48(Be11, Be10 + n + γ). The first chapter reviews the various nuclear processes that take place when 2 nuclei collide with a particular attention for the towing mode. The second chapter is dedicated to solving the time dependant Schroedinger equation (TDSE) in order to assess the impact of various parameters such as incident energy, target charge or the linking energy of the nucleon, on the towing mode reaction. The third chapter deals with the experimental equipment and set-up including detectors and the data acquisition system. Computerized simulations have been performed in order to assess the efficiency of the detecting system, they are presented in the fourth chapter. A comparison between experimental data and the results from TDSE solving, concerning the energy spectra of the emitted particles, has enabled the author to deduce the spectroscopic factors for the different contributions of the fundamental state of Be11, they are presented in the last chapter. The cross-sections of the towing mode are of the magnitude of several tens of milli-barns in the case of weakly bound nuclei like Be11 which make it an efficient tool to study intern structure of nuclei. (A.C.)

  5. Beryllium pressure vessels for creep tests in magnetic fusion energy

    International Nuclear Information System (INIS)

    Beryllium has interesting applications in magnetic fusion experimental machines and future power-producing fusion reactors. Chief among the properties of beryllium that make these applications possible is its ability to act as a neutron multiplier, thereby increasing the tritium breeding ability of energy conversion blankets. Another property, the behavior of beryllium in a 14-MeV neutron environment, has not been fully investigated, nor has the creep behavior of beryllium been studied in an energetic neutron flux at thermodynamically interesting temperatures. This small beryllium pressure vessel could be charged with gas to test pressures around 3, 000 psi to produce stress in the metal of 15,000 to 20,000 psi. Such stress levels are typical of those that might be reached in fusion blanket applications of beryllium. After contacting R. Powell at HEDL about including some of the pressure vessels in future test programs, we sent one sample pressure vessel with a pressurizing tube attached (Fig. 1) for burst tests so the quality of the diffusion bond joints could be evaluated. The gas used was helium. Unfortunately, budget restrictions did not permit us to proceed in the creep test program. The purpose of this engineering note is to document the lessons learned to date, including photographs of the test pressure vessel that show the tooling necessary to satisfactorily produce the diffusion bonds. This document can serve as a starting point for those engineers who resume this task when funds become available

  6. Impurities effect on the swelling of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Donne, M.D.; Scaffidi-Argentina, F. [Institut fuer Neutronenphysik und Reaktortechnik, Karlsruhe (Germany)

    1995-09-01

    An important factor controlling the swelling behaviour of fast neutron irradiated beryllium is the impurity content which can strongly affect both the surface tension and the creep strength of this material. Being the volume swelling of the old beryllium (early sixties) systematically higher than that of the more modem one (end of the seventies), a sensitivity analysis with the aid of the computer code ANFIBE (ANalysis of Fusion Irradiated BEryllium) to investigate the effect of these material properties on the swelling behaviour of neutron irradiated beryllium has been performed. Two sets of experimental data have been selected: the first one named Western refers to quite recently produced Western beryllium, whilst the second one, named Russian refers to relatively old (early sixties) Russian beryllium containing a higher impurity rate than the Western one. The results obtained with the ANFIBE Code were assessed by comparison with experimental data and the used material properties were compared with the data available in the literature. Good agreement between calculated and measured values has been found.

  7. Behaviour of Molten Beryllium with ITER Reference CFC NB31 (SNECMA) Under Moisture

    International Nuclear Information System (INIS)

    A dramatic exothermic reaction with aluminium, a carbide forming metal, has been observed in Tore Supra. A small rod of 30 mm3, acting as a temperature proof, was enclosed in a blind hole of a thermally loaded low density PAN fiber CFC 1001Z block (SGL), which reached a temperature of about 1300 oC during plasma operation. The molten aluminium had penetrated the carbon matrix through to the block's front surface. After component removal and roughly 2 months of exposure to air in the laboratory, the CFC in front of the blind hole was found to have been locally destroyed over a crater-shaped structure of 2 cm diameter. This was due to an enhanced decomposition of aluminium carbide to aluminium hydroxide. Beryllium (Be), also a carbide forming metal, is used on the ITER first wall. Carbon reinforced carbon (CFC) of type NB31 (Snecma) covers the vertical divertor targets. It is expected that beryllium material will be transported during normal and/or off normal plasma operation to the carbon based divertor targets to form beryllium carbide. During air venting or a supposed accidental in-vessel water leak event, it will react exothermically under moisture to beryllium oxide. In order to investigate to which extent the CFC structure could be modified or eventually destroyed, this reaction process has been simulated with a CFC block NB31 of size 16 x 32 x 20 mm3, where about 40 mm3 of Be S65 C (Brush Wellmann) has been placed in a previously drilled blind hole of 4 mm diameter oriented parallel to the high conductivity pitch fibers. When melted, by heating the CFC block, the Be penetrated in the carbon matrix through to the block's front surface. The front surface of the CFC was then exposed to humidity (tap water) for about 2 weeks and then stored for a further 2 months in a closed vinyl bag under atmospheric pressure after which the sample was analysed. After the exposure of the CFC to humidity, reaction products have been detected at the surface of the carbon fibre

  8. Contribution to the study of Li7 + d → 2α + n and B11 + p → 3α reactions

    International Nuclear Information System (INIS)

    This research thesis addressed the study of the Li7 + d → α + He5 → 2α + n reaction. A precise geometry allowed the comparison of the α interaction in this reaction with the neutron scattering by He5. The quantitative comparison of results of coincidence with theoretical predictions has been addressed either by the intervention of effects such as interference between two processes, or from more simple hypotheses. The author also presents the used equipment and describes how experimental results are processed

  9. Beryllium data base for in-pile mockup test on blanket of fusion reactor, (1)

    International Nuclear Information System (INIS)

    Beryllium has been used in the fusion blanket designs with ceramic breeder as a neutron multiplier to increase the net tritium breeding ratio (TBR). The properties of beryllium, that is physical properties, chemical properties, thermal properties, mechanical properties, nuclear properties, radiation effects, etc. are necessary for the fusion blanket design. However, the properties of beryllium have not been arranged for the fusion blanket design. Therefore, it is indispensable to check and examine the material data of beryllium reported previously. This paper is the first one of the series of papers on beryllium data base, which summarizes the reported material data of beryllium. (author)

  10. Chemistry of semiconductor clusters: Reactions of Si sub n sup + (n = 11-50) with C sub 2 H sub 4 show evidence for numerous structural isomers

    Energy Technology Data Exchange (ETDEWEB)

    Creegan, K.M.; Jarrold, M.F. (AT and T Bell Labs., Murray Hill, NJ (USA))

    1990-05-09

    The chemical reactions of Si{sub n}{sup +} (n = 11-50) with C{sub 2}H{sub 4} have been investigated at room temperature with use of injected ion drift tube techniques. The reaction kinetics for the addition of the first C{sub 2}H{sub 4} molecule have been investigated in detail. The data suggest structural isomers, which react at widely different rates, are present for virtually all clusters in the size range investigated. Prior to this work isomers of atomic clusters have only been identified in a few specific cases. For Si{sub 20}{sup +} evidence is presented suggesting that the isomers interconvert slowly on the time scale of their experiments. All the other isomers appear to be stable at room temperature. There appears to be nothing unique about either Si{sub 39}{sup +} or Si{sub 45}{sup +} (which were found, by Smalley and co-workers, to be particularly unreactive with NH{sub 3}). The reactions with C{sub 2}H{sub 4} appear to be much more sensitive to the cluster structure than the reactions with NH{sub 3}, suggesting that the reactions with C{sub 2}H{sub 4} involve specific localized sites on the cluster.

  11. Study of the (d,α) reactions on the nuclei 10B, 11B, 12C, and 13C and the reaction 13C(p,α)10B and their microscopic and semicroscopic analysis

    International Nuclear Information System (INIS)

    In the framework of a systematic analysis of many-particle transfer reactions on light nuclei in the present thesis the two-particle transfer reactions of the type (d,α) on the nucleus 10B at Esub(d) = 16 MeV and on the nuclei 11B, 12C and 13C at Esub(d) = 24 MeV as well as the three-particle transfer reaction 13C(p,α)10B at eight incident energies between 16 and 45 MeV have been studied. In the case of the residual nuclei 10B and 11B transitions up to an excitation energy Esub(x) approx.= 7.5 respectively approx.= 9,0 MeV, in the case of the residual nuclei 8Be and 9Be transitions up to Esub(x) approx.= 17 respectively 2.5 MeV were evaluated. Under the assumption that the studied reactions behave as direct one-stage transfer processes the measurement results were analyzed in the framework of the DWBA theory in zero-range approximation. The parameters for the optical potentials used in the DWBA calculations were taken from literature and partly modified by fitting to the angular distributions of the reactions studied here. Microscopic and semimicroscopic calculations were performed. In the semimicroscopic calculations the spectroscopic amplitudes calculated microscopically or in SU(3) approximation were used together with a cluster form factor, in the other case with a microscopically calculated form factor. For the residual nucleus for some higher excited states results on spin, parity, and isospin could be partly obtained, partly confirmed. (orig./HSI)

  12. Angular distribution and yield of protons from the 10B(d, p)11B reaction (II)

    NARCIS (Netherlands)

    Paris, C.H.; Valckx, F.P.G.; Endt, P.M.

    1954-01-01

    In a previous paper (to be quoted as (I)) angular distribution measurements have been described of four proton groups from the B(d, p)B reaction at a deuteron energy of Ed = 0.31 MeV. In the present investigation measurements were added at Ed = 0.20, 0.45 and 0.60 MeV. The differential cross sectio

  13. High sensitivity boron quantification in bulk silicon using the {sup 11}B(p,{alpha}{sub 0}){sup 8}Be nuclear reaction

    Energy Technology Data Exchange (ETDEWEB)

    Moro, Marcos V.; Silva, Tiago F. da; Added, Nemitala; Rizutto, Marcia A.; Tabacniks, Manfredo H. [Instituto de Fisica da Universidade de Sao Paulo, C.P. 66318, 05315-970 Sao Paulo, SP (Brazil); Neira, John B.; Neto, Joao B. F. [Institute of Research Tecnology, Cidade Universitaria, SP, 05508-091 (Brazil)

    2013-05-06

    There is a great need to quantify sub-ppm levels of boron in bulk silicon. There are several methods to analyze B in Si: Nuclear Reaction Analysis using the {sup 11}B(p,{alpha}{sub 0}){sup 8}Be reaction exhibits a quantification limit of some hundreds ppm of B in Si. Heavy Ion Elastic Recoil Detection Analysis offers a detection limit of 5 to 10 at. ppm. Secondary Ion Mass Spectrometry is the method of choice of the semiconductor industry for the analysis of B in Si. This work verifies the use of NRA to quantify B in Si, and the corresponding detection limits. Proton beam with 1.6 up to 2.6 MeV was used to obtain the cross-section of the {sup 11}B(p,{alpha}{sub 0}){sup 8}Be nuclear reaction at 170 Degree-Sign scattering angle. The results show good agreementwith literature indicating that the quantification of boron in silicon can be achieved at 100 ppm level (high sensitivity) at LAMFI-IFUSP with about 16% uncertainty. Increasing the detection solid angle and the collected beam charge, can reduce the detection limit to less than 100 ppm meeting present technological needs.

  14. Formation and characterization of two interconvertible side-on and end-on bonded beryllium ozonide complexes.

    Science.gov (United States)

    Zhou, Zijian; Li, Yuzhen; Zhuang, Jia; Wang, Guanjun; Chen, Mohua; Zhao, Yanying; Zheng, Xuming; Zhou, Mingfei

    2011-09-01

    The reactions of beryllium atoms with dioxygen were reinvestigated by matrix isolation infrared absorption spectroscopy. Besides the previously reported linear OBeO and cyclic Be(2)O(2) molecules, two interconvertible beryllium ozonide complexes were prepared and characterized. The BeOBe(η(2)-O(3)) complex was formed on annealing, which is characterized to be a side-on bonded ozonide complex with a planar C(2v) structure. The BeOBe(η(2)-O(3)) complex isomerized to the BeOBe(η(1)-O(3)) isomer under visible light excitation, which is an end-on bonded ozonide complex with planar C(s) symmetry. These two isomers are interconvertible; that is, visible light induces the conversion of the side-on bonded complex to the end-on bonded isomer, and vice versa on annealing. In addition, evidence is also presented for the linear BeOBeOBe cluster. PMID:21806010

  15. Beryllium Abundances of Solar-Analog Stars

    CERN Document Server

    Takeda, Yoichi; Honda, Satoshi; Kawanomoto, Satoshi; Ando, Hiroyasu; Sakurai, Takashi

    2011-01-01

    An extensive beryllium abundance analysis was conducted for 118 solar analogs (along with 87 FGK standard stars) by applying the spectrum synthesis technique to the near-UV region comprising the Be II line at 3131.066 A, in an attempt to investigate whether Be suffers any depletion such as the case of Li showing a large diversity. We found that, while most of these Sun-like stars are superficially similar in terms of their A(Be) (Be abundances) around the solar value within ~ +/- 0.2dex, 4 out of 118 samples turned out strikingly Be-deficient (by more than ~2 dex) and these 4 stars belong to the group of lowest v_e sin i (projected rotation velocity). Moreover, even for the other majority showing an apparent similarity in Be, we can recognize a tendency that A(Be) gradually increases with an increase in v_e sin i. These observational facts suggest that any solar analog star (including the Sun) generally suffers some kind of Be depletion during their lives, where the rotational velocity (or the angular momentu...

  16. Interaction of beryllium and hydrogen isotopes

    International Nuclear Information System (INIS)

    It has been considered that in the plasma nuclear fusion experimental devices of magnetic field confinement type, in order to reduce the energy loss due to bremsstrahlung, the use of the plasma-facing materials (PFM) of low atomic number like carbon is indispensable at present. Attention is paid to beryllium which is one of the PFMs, and its effectiveness was rocognized by the practical use in JET. When Be is considered as a PFM, it is necessary to accumulate many data on the diffusion, dissolution, permeation and surface recoupling of hydrogen isotopes, which regulate the recycling and inventory of deuterium and tritium fuel, and the relation of these factors with the physical and chemical states of Be. In this research, as the first phase of understanding the characteristics of Be as a PFM, the change of the surface condition by heating Be was investigated by X-ray photoelectron spectroscopy, and the chemical form of the Be-related substances emitted from the surface by argon or deuterium ion sputtering and their thermal behavior were measured by secondary ion mass spectrometry. The sample, the measurement and the results are reported. The diversified secondary ions of Be, Be cluster, Be oxide, hydroxide, hydride and deuteride were observed by the measurement, and their features are shown. (K.I.)

  17. Electronic band structure of beryllium oxide

    CERN Document Server

    Sashin, V A; Kheifets, A S; Ford, M J

    2003-01-01

    The energy-momentum resolved valence band structure of beryllium oxide has been measured by electron momentum spectroscopy (EMS). Band dispersions, bandwidths and intervalence bandgap, electron momentum density (EMD) and density of occupied states have been extracted from the EMS data. The experimental results are compared with band structure calculations performed within the full potential linear muffin-tin orbital approximation. Our experimental bandwidths of 2.1 +- 0.2 and 4.8 +- 0.3 eV for the oxygen s and p bands, respectively, are in accord with theoretical predictions, as is the s-band EMD after background subtraction. Contrary to the calculations, however, the measured p-band EMD shows large intensity at the GAMMA point. The measured full valence bandwidth of 19.4 +- 0.3 eV is at least 1.4 eV larger than the theory. The experiment also finds a significantly higher value for the p-to-s-band EMD ratio in a broad momentum range compared to the theory.

  18. Lightweight beryllium wins wings as real heavyweight

    International Nuclear Information System (INIS)

    Development of Be materials with improved strength and ductility levels is possible by exploitation of new consolidation techniques, such as cold and hot isostatic pressing and plasma spraying followed by sintering. Working the vacuum hot pressed billet by cross-rolling or extruding and by forging improves the mechanical properties. The valuable contributions of Be in aerospace and nuclear applications are considered. SNAP-8 and SNAP-10A applications, replacement of an Al alloy on the Minuteman spacer ring by Be, aircraft (flight testing of F-4 Phantom with a Be rudder and actual structural application of Be wrought mill product in F-14 Tomcat) and communication satellite (despin platforms, spinning arms, russ structures) applications are discussed together with instrument applications (guidance systems for Saturn V, Minuteman and the Boeing 747, proportional counters for space-oriented x-ray experiments), Be applications in lunar explorations, expanding use of Be in space applications as a mirror blank material and Be disks for the brakes of giant aircraft. Beryllium has the highest specific heat of all structural metals and it shows chemical inertness to many of the common ocket propellants and their combustion products. Its handicaps are high cost and poor impact behavior. (U.S.)

  19. Steam-chemical reactivity for irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Anderl, R.A.; McCarthy, K.A.; Oates, M.A.; Petti, D.A.; Pawelko, R.J.; Smolik, G.R. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States)

    1998-01-01

    This paper reports the results of an experimental investigation to determine the influence of neutron irradiation effects and annealing on the chemical reactivity of beryllium exposed to steam. The work entailed measurements of the H{sub 2} generation rates for unirradiated and irradiated Be and for irradiated Be that had been previously annealed at different temperatures ranging from 450degC to 1200degC. H{sub 2} generation rates were similar for irradiated and unirradiated Be in steam-chemical reactivity experiments at temperatures between 450degC and 600degC. For irradiated Be exposed to steam at 700degC, the chemical reactivity accelerated rapidly and the specimen experienced a temperature excursion. Enhanced chemical reactivity at temperatures between 400degC and 600degC was observed for irradiated Be annealed at temperatures of 700degC and higher. This reactivity enhancement could be accounted for by the increased specific surface area resulting from development of a surface-connected porosity in the irradiated-annealed Be. (author)

  20. Beryllium abundances in stars hosting giant planets

    CERN Document Server

    Santos, N C; Israelian, G; Mayor, M; Rebolo, R; García-Gíl, A; Pérez de Taoro, M R; Randich, S

    2002-01-01

    We have derived beryllium abundances in a wide sample of stars hosting planets, with spectral types in the range F7V-K0V, aimed at studying in detail the effects of the presence of planets on the structure and evolution of the associated stars. Predictions from current models are compared with the derived abundances and suggestions are provided to explain the observed inconsistencies. We show that while still not clear, the results suggest that theoretical models may have to be revised for stars with Teff<5500K. On the other hand, a comparison between planet host and non-planet host stars shows no clear difference between both populations. Although preliminary, this result favors a ``primordial'' origin for the metallicity ``excess'' observed for the planetary host stars. Under this assumption, i.e. that there would be no differences between stars with and without giant planets, the light element depletion pattern of our sample of stars may also be used to further investigate and constraint Li and Be deple...

  1. Analysis of HLA-DP association with beryllium disease susceptibility in pooled exposed populations

    Energy Technology Data Exchange (ETDEWEB)

    Cesare Saltini, Massimo Amicosante

    2009-12-19

    in each immunogenetic study. In this context, the populations of the study already performed in this field by the University of Modena and Rome (by Prof. C. Saltini) and the University of Pennsylvania (by Prof. M. Rossman) have been evaluated by using similar HLA molecular typing methodologies and that both populations have now been followed up for a period of 4 to 7 years. The general objective of this study has to generate a larger data base comprising the two population with which analyze gene disease association with greater statistical power and ascertain the effect of lesser common gener variants which may be missed when analyzing associations on small populations. In particular addressing the role suggested in previous study such as: (1) the role of HLA-DP rare alleles and polymorphisms, and (2) the role of the HLA markers in disease progression from sensitization. The two populations from the already published studies (Saltini et al Eur Respir J. 2001 18:677-84; Rossman et al Am J Respir Crit Care Med. 2002 165:788-94) present similar aspects about: ethnicity, type and length of exposure to Be dust, a broadly similar association between beryllium related abnormalities and HLA. The two population have been pooled and evaluated using common criteria of diagnosis (Sensitized subject: at least 2 positive BeLPT tests each with 2 positive wells; CBD-affected subject: identification of well formed non-caseating granulomas on biopsy), follow up and HLA typing technique (complete HLA-DRB, DQB, DPB high resolution typing using amplification with sequence specific primers or sequence based typing). The two populations included 137 subjects with Beryllium hypersensitized (BH) and 155 Be-exposed controls. Inclusion criteria were met by one hundred and six subjects with Be-hypersensitivity of whom 55 were affected by CBD (age 52 {+-} 11 years; 50 caucasians, 2 African-Americans 2 Hispanics and 1 Asian; 46 males and 9 females; mean duration of Be-exposure 15 {+-} 9 years

  2. Prevalence and risk factors for depressive reaction among resident survivors after the tsunami following the Great East Japan Earthquake, March 11, 2011.

    Directory of Open Access Journals (Sweden)

    Chieko Matsubara

    Full Text Available The Great East Japan Earthquake caused a gigantic tsunami which devastated coastal areas of northern Japan on 11 March 2011. Despite the large number of 'resident survivors' who continued to reside in their damaged houses on the second or upper floors, research on the mental health of these individuals has been limited. This study explored the prevalence of depressive reaction and risk factors for depressive reaction among these resident survivors.A cross-sectional household health support needs screening was conducted for resident survivors in Higashi-Matsushima city, Miyagi prefecture, two to four months after the tsunami. The health interview that was conducted including mental status, assessed by the Patient Health Questionnaire-2 (PHQ-2.Of 5,454 respondents, 8.1% had depressive reaction. After adjustment by the number of weeks from the tsunami and the mortality rate at each respondent's place of residence, depressive reaction was significantly associated with house flooding below or above the ground floor (odds ratios of 1.92, 2.36, respectively, the unavailability of gas supply (odds ratio, 1.67, being female (odds ratio, 1.47, middle aged or elderly (odds ratios of 2.41, 2.42, respectively, regular intake of psychotropic medicine(s since before the tsunami (odds ratio, 2.53 and the presence of one to five or more than six cohabiters (odds ratios of 0.61, 0.52, respectively.The results suggest a considerable psychological burden (depressive reaction following the tsunami among resident survivors. Special supports for families with psychiatric problems need to be considered among resident survivors. Restoration of lifeline utilities and the strengthening of social ties of persons living alone may help prevent depressive reaction among resident survivors after a tsunami.

  3. Analysis of longitudinal momentum distribution of 10Be in 9Be(11Be, 10Be)X reaction

    International Nuclear Information System (INIS)

    We have analyzed the longitudinal momentum distribution of 10Be fragment coming from one neutron stripping from 11Be on 9Be target at 60AMeV beam energy within the framework of zero and first order eikonal approximation. It has been found that the inclusion of first order correction term in the eikonal approximation results in a substantial improvement in the matching between the predicted and experimental results especially in tail region of the spectrum. (author)

  4. Complete and incomplete fusion competition in 11B-induced fission reaction on medium mass targets at intermediate energies

    OpenAIRE

    Demekhina, N. A.; Karapetyan, G. S.; Balabekyan, A. R.

    2014-01-01

    The cross sections for the binary fission of 197Au, 181Ta and 209Bi targets induced by 11B ions were measured at intermediate energies. The fission products cross sections were studied by means of activation analysis in off-line regime observed gamma-ray spectra. The fission cross section is reconstructed on the basis of charge and mass distribution of the fission products.

  5. A Report on the Validation of Beryllium Strength Models

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Derek Elswick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-05

    This report discusses work on validating beryllium strength models with flyer plate and Taylor rod experimental data. Strength models are calibrated with Hopkinson bar and quasi-static data. The Hopkinson bar data for beryllium provides strain rates up to about 4000 per second. A limitation of the Hopkinson bar data for beryllium is that it only provides information on strain up to about 0.15. The lack of high strain data at high strain rates makes it difficult to distinguish between various strength model settings. The PTW model has been calibrated many different times over the last 12 years. The lack of high strain data for high strain rates has resulted in these calibrated PTW models for beryllium exhibiting significantly different behavior when extrapolated to high strain. For beryllium, the α parameter of PTW has recently been calibrated to high precision shear modulus data. In the past the α value for beryllium was set based on expert judgment. The new α value for beryllium was used in a calibration of the beryllium PTW model by Sky Sjue. The calibration by Sjue used EOS table information to model the temperature dependence of the heat capacity. Also, the calibration by Sjue used EOS table information to model the density changes of the beryllium sample during the Hopkinson bar and quasi-static experiments. In this paper, the calibrated PTW model by Sjue is compared against experimental data and other strength models. The other strength models being considered are a PTW model calibrated by Shuh- Rong Chen and a Steinberg-Guinan type model by John Pedicini. The three strength models are used in a comparison against flyer plate and Taylor rod data. The results show that the Chen PTW model provides better agreement to this data. The Chen PTW model settings have been previously adjusted to provide a better fit to flyer plate data, whereas the Sjue PTW model has not been changed based on flyer plate data. However, the Sjue model provides a reasonable fit to

  6. Controlling Beryllium Contaminated Material And Equipment For The Building 9201-5 Legacy Material Disposition Project

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, T. D.; Easterling, S. D.

    2010-10-01

    This position paper addresses the management of beryllium contamination on legacy waste. The goal of the beryllium management program is to protect human health and the environment by preventing the release of beryllium through controlling surface contamination. Studies have shown by controlling beryllium surface contamination, potential airborne contamination is reduced or eliminated. Although there are areas in Building 9201-5 that are contaminated with radioactive materials and mercury, only beryllium contamination is addressed in this management plan. The overall goal of this initiative is the compliant packaging and disposal of beryllium waste from the 9201-5 Legacy Material Removal (LMR) Project to ensure that beryllium surface contamination and any potential airborne release of beryllium is controlled to levels as low as practicable in accordance with 10 CFR 850.25.

  7. Validation of cleaning method for various parts fabricated at a Beryllium facility

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Cynthia M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-15

    This study evaluated and documented a cleaning process that is used to clean parts that are fabricated at a beryllium facility at Los Alamos National Laboratory. The purpose of evaluating this cleaning process was to validate and approve it for future use to assure beryllium surface levels are below the Department of Energy’s release limits without the need to sample all parts leaving the facility. Inhaling or coming in contact with beryllium can cause an immune response that can result in an individual becoming sensitized to beryllium, which can then lead to a disease of the lungs called chronic beryllium disease, and possibly lung cancer. Thirty aluminum and thirty stainless steel parts were fabricated on a lathe in the beryllium facility, as well as thirty-two beryllium parts, for the purpose of testing a parts cleaning method that involved the use of ultrasonic cleaners. A cleaning method was created, documented, validated, and approved, to reduce beryllium contamination.

  8. Beryllium processing technology review for applications in plasma-facing components

    International Nuclear Information System (INIS)

    Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itself and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included

  9. The structure, properties and performance of plasma-sprayed beryllium for fusion applications

    International Nuclear Information System (INIS)

    Plasma-spray technology is under investigation as a method for producing high thermal conductivity beryllium coatings for use in magnetic fusion applications. Recent investigations have focused on optimizing the plasma-spray process for depositing beryllium coatings on damaged beryllium surfaces. Of particular interest has been optimizing the processing parameters to maximize the through-thickness thermal conductivity of the beryllium coatings. Experimental results will be reported on the use of secondary H2 gas additions to improve the melting of the beryllium powder and transferred-arc cleaning to improve the bonding between the beryllium coatings and the underlying surface. Information will also be presented on thermal fatigue tests which were done on beryllium coated ISX-B beryllium limiter tiles using 10 sec cycle times with 60 sec cooldowns and an International Thermonuclear Experimental Reactor (ITER) relevant divertor heat flux slightly in excess of 5 MW/m2

  10. Beryllium processing technology review for applications in plasma-facing components

    Energy Technology Data Exchange (ETDEWEB)

    Castro, R.G.; Jacobson, L.A.; Stanek, P.W.

    1993-07-01

    Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itself and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included.

  11. Cross-coupling Reaction of β,β-Difluoro-α-phenylvinylstannane with Alkenyl Iodides: Novel Approach to 2-Phenyl-1,1-difluoro-1,3-butadienes

    International Nuclear Information System (INIS)

    A typical reaction procedure for the preparation is as follows. A 15 mL two-neck round bottom flask equipped with a reflux condenser, a magnetic stirrer bar, a septum and argon tee connected to an argon source was charged with β,β-difluoro-α-phenylvinylstannane (0.100 g, 0.230 mmol), 1,1-difluoro-2-iodo-2-phenylethene (0.136 g, 0.510 mmol) and 5 mL DMF. After Pd(PPh3)4 (0.023 mmol) and CuI (0.023 mmol) were added, the mixture was heated at 80 .deg. C for 2 hours and then quenched with water. The reaction mixture was extracted with diethyl ether (30 mL x 2). The diethyl ether solution was dried with anhydrous MgSO4, filtered, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography

  12. The results of medical surveillance of beryllium production personnel

    International Nuclear Information System (INIS)

    The report presents results of surveillance of 1836 workers of beryllium production of Ulba Metallurgical Plant JSC with the acute and chronic forms of occupation diseases for 52 years of its operation. The dependence of acute and chronic occupation lesions on the protection degree is shown. It has been found out that, the risk of getting an occupation disease increases sharply at the moments of experimental works and at the time of reconstruction and some other extreme conditions in the production, that is supported by fixed lesions of eye mucous coat, skin and lung lesions. In this case, the readiness of people for their work in deleterious conditions and their personal responsibility for following the regulations of safety occupational standards plays a definite role. Therefore, the issues of protection are of paramount importance in prophylaxis both of acute and chronic exposure to beryllium. An influence of duration of service and occupation on chronic beryllium diseases is shown. A parallel between the lung beryllium disease and skin lesions by insoluble beryllium compounds is drawn for the first time. (author)

  13. Preparation of copper-beryllium alloys from Indian beryl

    International Nuclear Information System (INIS)

    The report presents the results of laboratory scale investigations on the preparation of copper-beryllium and aluminium-beryllium master alloys starting from Indian beryl and adopting the fluoride process. The flow-sheet involves : (1) conversion of the Be-values in beryl into water soluble sodium beryllium fluoride (2) preparation of beryllium hydroxide by alkali treatment of aqueous Na2BeF4 (3) conversion of Be(OH)2 to (NH4)2BeF4 by treatment with NH4HF2 (4) thermal decomposition of (NH4)2BeF4 to BeF2 and (5) magnesium reduction of BeF2 (with the addition of copper/aluminium) to obtain beryllium alloys. The method has been successfully employed for the preparation of Cu-Be master alloys containing about 8% Be and free of Mg on a 200 gm scale. An overall Be-recovery of about 80% has been achieved. Al-8% Be master alloys have also been prepared by this method. Toxicity and health hazards associated with Be are discussed and the steps taken to ensure safe handling of Be are described. (author)

  14. Dissolution of FB-Line Residues Containing Beryllium Metal

    International Nuclear Information System (INIS)

    Scrap materials containing plutonium (Pu) metal are currently being transferred from the FB Line vault to HB Line for dissolution and subsequent disposition through the H-Canyon facility. Some of the items scheduled for dissolution contain both Pu and beryllium (Be) metal as a composite material. The Pu and Be metals were physically separated to minimize the amount of Be associated with the Pu; however, the dissolution flowsheet was required to dissolve small amounts of Be combined with the Pu metal using a dissolving solution containing nitric acid (HNO3) and potassium fluoride (KF). Since the dissolution of Pu metal in HNO3/fluoride (F-) solutions is well understood, the primary focus of the experimental program was the dissolution of Be metal. Initially, small-scale experiments were used to measure the dissolution rate of Be metal foils using conditions effective for the dissolution of Pu metal. The experiments demonstrated that the dissolution rate was nearly independent of the HNO3 concentration over the limited range of investigation and only a moderate to weak function of the F- concentration. The effect of temperature was more pronounced, significantly increasing the dissolution rate between 40 and 105 degrees C. The offgas from three Be metal foil dissolutions was collected and characterized. The production of hydrogen (H2) was found to be sensitive to the HNO3 concentration, decreasing by a factor of approximately two when the HNO3 was increased from 4 to 8 M. This result is consistent with the dissolution mechanism shifting away from a typical metal/acid reaction toward increased production of nitrogen oxides by nitrate (NO3-) oxidation

  15. Beryllium Target for Accelerator - Based Boron Neutron Capture Therapy

    International Nuclear Information System (INIS)

    This work is part of a project for developing Accelerator Based Boron Neutron Capture Therapy (AB- BNCT) for which the generation of neutrons through nuclear reactions like 9Be(d,n) is necessary. In this paper first results of the design and development of such neutron production targets are presented. For this purpose, the neutron production target has to be able to withstand the mechanical and thermal stresses produced by intense beams of deuterons (of 1.4 MeV with a total current of about 30mA). In particular, the target should be able to dissipate an energy density of up to 1 kW/cm2 and preserve its physical and mechanical properties for a sufficient length of time under irradiation conditions and hydrogen damage. The target is proposed to consist of a thin Be deposit (neutron producing material) on a thin W or Mo layer to stop the beam and a Cu backing to help carry away the heat load. To achieve the adhesion of the Be films on W, Mo and Cu substrates, a powder blasting technique was applied with quartz and alumina microspheres. On the other hand, Ag deposits were made on some of the substrates previously blasted to favor the chemical affinity between Beryllium and the substrate thus improving adhesion. Be deposits were characterized by means of different techniques including Electron Microscopy (Sem) and Xr Diffraction. Roughness and thickness measurements were also made. To satisfy the power dissipation requirements for the neutron production target, a microchannel system model is proposed. The simulation based on this model permits to determine the geometric parameters of the prototype complying with the requirements of a microchannel system. Results were compared with those in several publications and discrepancies lower than 10% were found in all cases. A prototype for model validation is designed here for which simulations of fluid and structural mechanics were carried out and discussed

  16. Analytical potential energy surfaces for the four-center elimination reaction of HCl from 1,1-dichloroethylene: translational energy release from classical trajectory studies

    International Nuclear Information System (INIS)

    Analytical potential energy surfaces have been constructed for the four-center elimination of HCl from 1,1-dichloroethylene. The potential functions are Morse-type functions which are modified by appropriate switching and attenuating functions with adjustable parameters. The parameters have been found by fitting the calculated vibrational frequencies, reaction endothermicity, equilibrium geometries of the reactant and products to those of experiments and ab initio calculations. The translational energy release obtained from classical trajectory calculations on this surface is in good agreement with the experiment

  17. Cancer-induced Expansion and Activation of CD11b+Gr-1+ Cells Predispose Mice to Adenoviral-triggered Anaphylactoid-type Reactions

    OpenAIRE

    Pande, Kalyan; Ueda, Roanna; Machemer, Todd; Sathe, Manjiri; Tsai,, J.F.; Brin, Elena; Delano, Matthew J; van Rooijen, Nico; McClanahan, Terrill K.; Talmadge, James E.; Moldawer, Lyle L; Phillips, Joseph H; Laface, Drake M.

    2009-01-01

    Intravascular delivery (1.5 × 109 particles and higher) of recombinant adenovirus (rAd) induces myeloid cell mediated, self-limiting hemodynamic responses in normal mice. However, we observed anaphylactoid-type reactions and exacerbated hemodynamic events following rAd injection in mice bearing malignant 4T1 mammary carcinoma. Because 4T1 tumors induce significant CD11b+Gr-1+ myeloid cell expansion and activation, we set to determine whether this causes rAd-induced exaggerated responses. When...

  18. Report of a technical evaluation panel on the use of beryllium for ITER plasma facing material and blanket breeder material

    International Nuclear Information System (INIS)

    Beryllium because of its low atomic number and high thermal conductivity, is a candidate for both ITER first wall and divertor surfaces. This study addresses the following: why beryllium; design requirements for the ITER divertor; beryllium supply and unirradiated physical/mechanical property database; effects of irradiation on beryllium properties; tritium issues; beryllium health and safety; beryllium-coolant interactions and safety; thermal and mechanical tests; plasma erosion of beryllium; recommended beryllium grades for ITER plasma facing components; proposed manufacturing methods to produce beryllium parts for ITER; emerging beryllium materials; proposed inspection and maintenance techniques for beryllium components and coatings; time table and costs; and the importance of integrating materials and manufacturing personnel with designers

  19. Report of a technical evaluation panel on the use of beryllium for ITER plasma facing material and blanket breeder material

    Energy Technology Data Exchange (ETDEWEB)

    Ulrickson, M.A. [ed.] [Sandia National Labs., Albuquerque, NM (United States); Manly, W.D. [Oak Ridge National Lab., TN (United States); Dombrowski, D.E. [Brush Wellman, Inc., Cleveland, OH (United States)] [and others

    1995-08-01

    Beryllium because of its low atomic number and high thermal conductivity, is a candidate for both ITER first wall and divertor surfaces. This study addresses the following: why beryllium; design requirements for the ITER divertor; beryllium supply and unirradiated physical/mechanical property database; effects of irradiation on beryllium properties; tritium issues; beryllium health and safety; beryllium-coolant interactions and safety; thermal and mechanical tests; plasma erosion of beryllium; recommended beryllium grades for ITER plasma facing components; proposed manufacturing methods to produce beryllium parts for ITER; emerging beryllium materials; proposed inspection and maintenance techniques for beryllium components and coatings; time table and costs; and the importance of integrating materials and manufacturing personnel with designers.

  20. Experimental studies and modeling of processes of hydrogen isotopes interaction with beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Tazhibaeva, I.L.; Chikhray, Y.V.; Romanenko, O.G.; Klepikov, A.Kh.; Shestakov, V.P.; Kulsartov, T.V. [Science Research Inst. of Experimental and Theoretical Physics of Kazakh State Univ., Almaty (Kazakhstan); Kenzhin, E.A.

    1998-01-01

    The objective of this work was to clarify the surface beryllium oxide influence on hydrogen-beryllium interaction characteristics. Analysis of experimental data and modeling of processes of hydrogen isotopes accumulation, diffusion and release from neutron irradiated beryllium was used to achieve this purpose as well as the investigations of the changes of beryllium surface element composition being treated by H{sup +} and Ar{sup +} plasma glowing discharge. (author)

  1. Study of two-step mechanisms in the 12C(p,d)11C reaction at 45 MeV

    International Nuclear Information System (INIS)

    An attempt was made to find the nuclear reaction mechanisms explaining the intensity and behavior of the cross sections in the 12C(p,d)11C reaction at 45 MeV. First, the conventional interpretation of the experimental data leads to two closely related conclusions. The behavior of the cross-sections measured cannot be explained without including the intermediate stage of collective 2+12C excitation or accounting for its possible interference with the direct capture of a neutron. The relative intensity of the different mechanisms is directly bound up with the value of the nuclear structure parameters of the wave function adopted. As a result this study is found to be an excellent wave function test and the results obtained seem to prove that the wave function calculated by Clegg for 11B is also suitable for 11C. Next a two-stage process was introduced, using inelastic deuteron scattering on 11C as the intermediate stage. The problem which then arises is to determine the deformation parameters of the final nucleus in its different excitation states. The model adopted is in fact very crude and only gives quantitative information on the physical reality of such a process. Some improvement is shown to be obtained by finite range and non-local potential corrections. It is observed that track-transitions, which correspond in fact to new processes interfering with those already introduced play an important part. The most realistic way to treat the problem is thus to make an exact calculation within the coupled equation system, keeping strictly to physically justified hypotheses

  2. Estimation of beryllium ground state energy by Monte Carlo simulation

    International Nuclear Information System (INIS)

    Quantum Monte Carlo method represent a powerful and broadly applicable computational tool for finding very accurate solution of the stationary Schrödinger equation for atoms, molecules, solids and a variety of model systems. Using variational Monte Carlo method we have calculated the ground state energy of the Beryllium atom. Our calculation are based on using a modified four parameters trial wave function which leads to good result comparing with the few parameters trial wave functions presented before. Based on random Numbers we can generate a large sample of electron locations to estimate the ground state energy of Beryllium. Our calculation gives good estimation for the ground state energy of the Beryllium atom comparing with the corresponding exact data

  3. Measurement of the ultracold neutron loss coefficient in beryllium powder

    International Nuclear Information System (INIS)

    The ultracold neutron (UCN) reflection from beryllium powder at different slab thicknesses and different packing densities is measured. The reduced UCN loss coefficient η=(1.75±0.35)x10-4 for thermally untreated beryllium is extracted from experimental data. The formerly obtained experimental results on UCN reflection from beryllium after high temperature annealing are reconsidered. The loss coefficient η at room temperature in this case is obtained to be (6.4±2.5)x10-5, which is an order of magnitude higher than the theoretical one. The extraction of the loss coefficient from the experimental data is based on the modified diffusion theory where albedo reflection depends on packing density

  4. Estimation of beryllium ground state energy by Monte Carlo simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kabir, K. M. Ariful [Department of Physical Sciences, School of Engineering and Computer Science, Independent University, Bangladesh (IUB) Dhaka (Bangladesh); Halder, Amal [Department of Mathematics, University of Dhaka Dhaka (Bangladesh)

    2015-05-15

    Quantum Monte Carlo method represent a powerful and broadly applicable computational tool for finding very accurate solution of the stationary Schrödinger equation for atoms, molecules, solids and a variety of model systems. Using variational Monte Carlo method we have calculated the ground state energy of the Beryllium atom. Our calculation are based on using a modified four parameters trial wave function which leads to good result comparing with the few parameters trial wave functions presented before. Based on random Numbers we can generate a large sample of electron locations to estimate the ground state energy of Beryllium. Our calculation gives good estimation for the ground state energy of the Beryllium atom comparing with the corresponding exact data.

  5. Elemental composition in sealed plutonium–beryllium neutron sources

    International Nuclear Information System (INIS)

    Five sealed plutonium–beryllium (PuBe) neutron sources from various manufacturers were disassembled. Destructive chemical analyses for recovered PuBe materials were conducted for disposition purposes. A dissolution method for PuBe alloys was developed for quantitative plutonium (Pu) and beryllium (Be) assay. Quantitation of Be and trace elements was performed using plasma based spectroscopic instruments, namely inductively coupled plasma mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES). Pu assay was accomplished by an electrochemical method. Variations in trace elemental contents among the five PuBe sources are discussed. - Highlights: • A destructive chemical analysis of the PuBe neutron sources includes the solubilization and digestion of the PuBe alloy material. • Plutonium was assayed by an electrochemical method. • Beryllium assay and trace elemental contents were determined by ICP instruments. • A large variation in trace elemental composition was observed among the five PuBe source materials

  6. Extraction of beryllium sulfate by a long chain amine

    International Nuclear Information System (INIS)

    The extraction of sulfuric acid in aqueous solution by a primary amine in benzene solution, 3-9 (diethyl) - 6-amino tri-decane (D.E.T. ) - i.e., with American nomenclature 1-3 (ethyl-pentyl) - 4-ethyl-octyl amine (E.P.O.) - has made it possible to calculate the formation constants of alkyl-ammonium sulfate and acid sulfate. The formula of the beryllium and alkyl-ammonium sulfate complex formed in benzene has next been determined, for various initial acidity of the aqueous solution. Lastly, evidence has been given of negatively charged complexes of beryllium and sulfate in aqueous solution, through the dependence of the aqueous sulfate ions concentration upon beryllium extraction. The formation constant of these anionic complexes has been evaluated. (author)

  7. Photochemical Behavior of Beryllium Complexes with Subporphyrazines and Subphthalocyanines.

    Science.gov (United States)

    Montero-Campillo, M Merced; Lamsabhi, Al Mokhtar; Mó, Otilia; Yáñez, Manuel

    2016-07-14

    Structures of beryllium subphthalocyanines and beryllium subporphyrazines complexes with different substituents are explored for the first time. Their photochemical properties are studied using time-dependent density functional theory calculations and compared to boron-related compounds for which their photochemical activity is already known. These beryllium compounds were found to be thermodynamically stable in a vacuum and present features similar to those of boron-containing analogues, although the nature of bonding between the cation and the macrocycle presents subtle differences. Most important contributions to the main peak in the Q-band region arise from HOMO to LUMO transitions in the case of subphthalocyanines and alkyl subporphyrazine complexes, whereas a mixture of that contribution and a HOMO-2 to LUMO contribution are present in the case of thioalkyl subporphyrazines. The absorption in the visible region could make these candidates suitable for photochemical devices if combined with appropriate donor groups. PMID:26812068

  8. Neutron irradiation behavior of ITER candidate beryllium grades

    Energy Technology Data Exchange (ETDEWEB)

    Kupriyanov, I.B.; Gorokhov, V.A.; Nikolaev, G.N. [A.A.Bochvar All-Russia Scientific Research Inst. of Inorganic Materials (VNIINM), Moscow (Russian Federation); Melder, R.R.; Ostrovsky, Z.E.

    1998-01-01

    Beryllium is one of the main candidate materials both for the neutron multiplier in a solid breeding blanket and for the plasma facing components. That is why its behaviour under the typical for fusion reactor loading, in particular, under the neutron irradiation is of a great importance. This paper presents mechanical properties, swelling and microstructure of six beryllium grades (DshG-200, TR-30, TshG-56, TRR, TE-30, TIP-30) fabricated by VNIINM, Russia and also one - (S-65) fabricated by Brush Wellman, USA. The average grain size of the beryllium grades varied from 8 to 25 {mu}m, beryllium oxide content was 0.8-3.2 wt. %, initial tensile strength was 250-680 MPa. All the samples were irradiated in active zone of SM-3 reactor up to the fast neutron fluence (5.5-6.2) {center_dot} 10{sup 21} cm{sup -2} (2.7-3.0 dpa, helium content up to 1150 appm), E > 0.1 MeV at two temperature ranges: T{sub 1} = 130-180degC and T{sub 2} = 650-700degC. After irradiation at 130-180degC no changes in samples dimensions were revealed. After irradiation at 650-700degC swelling of the materials was found to be in the range 0.1-2.1 %. Beryllium grades TR-30 and TRR, having the smallest grain size and highest beryllium oxide content, demonstrated minimal swelling, which was no more than 0.1 % at 650-700degC and fluence 5.5 {center_dot} 10{sup 21} cm{sup -2}. Tensile and compression test results and microstructure parameters measured before and after irradiation are also presented. (author)

  9. CHAPTER 7. BERYLLIUM ANALYSIS BY NON-PLASMA BASED METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Ekechukwu, A

    2009-04-20

    The most common method of analysis for beryllium is inductively coupled plasma atomic emission spectrometry (ICP-AES). This method, along with inductively coupled plasma mass spectrometry (ICP-MS), is discussed in Chapter 6. However, other methods exist and have been used for different applications. These methods include spectroscopic, chromatographic, colorimetric, and electrochemical. This chapter provides an overview of beryllium analysis methods other than plasma spectrometry (inductively coupled plasma atomic emission spectrometry or mass spectrometry). The basic methods, detection limits and interferences are described. Specific applications from the literature are also presented.

  10. The uses and adverse effects of beryllium on health

    DEFF Research Database (Denmark)

    Cooper, Ross G.; Harrison, Adrian Paul

    2009-01-01

    the current review for selecting articles were adopted from proposed criteria in The International Classification of Functioning, Disability, and Health. Articles were classified based on acute and chronic exposure and toxicity of beryllium. Results: The proportions of utilized and nonutilized...... articles were published in sources unobtainable through requests at the British Library, and some had no impact factor and were excluded. Conclusion: Beryllium has some useful but undoubtedly harmful effects on health and well-being. Measures needed to be taken to prevent hazardous exposure to this element...

  11. Method for removal of beryllium contamination from an article

    Science.gov (United States)

    Simandl, Ronald F.; Hollenbeck, Scott M.

    2012-12-25

    A method of removal of beryllium contamination from an article is disclosed. The method typically involves dissolving polyisobutylene in a solvent such as hexane to form a tackifier solution, soaking the substrate in the tackifier to produce a preform, and then drying the preform to produce the cleaning medium. The cleaning media are typically used dry, without any liquid cleaning agent to rub the surface of the article and remove the beryllium contamination below a non-detect level. In some embodiments no detectible residue is transferred from the cleaning wipe to the article as a result of the cleaning process.

  12. Radiation Damage of Beryllium Reflector for Research Reactor Application

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Suk Hoon [Korea Atomic Energy Research Institute Daejeon (Korea, Republic of)

    2013-07-01

    Beryllium is considered as a reflector material for the research reactor. The neutron fluence results in significant damage of material structure and corresponding degradation of physical.mechanical properties. In this study, the proton radiation damage of the beryllium grade manufactured by hot extrusion was investigated to emulate the effect of neutron radiation. The samples were irradiated by protons at room temperature; the acceleration voltage, and the proton amounts were 120keV, and 2.0 Χ 10{sup 18} ions/cm{sup 2}, respectively. The neutron irradiation experiment also have been conducted in HANARO, their results will be discussed in terms of swelling, and microstructure evolution.

  13. Study of excited states of the nucleus 12C in the range of overlapping resonances using the proton scattering on 11B and the nuclear reaction 11B(p,α0)8Be in the energy range Ep = 4.5 ... 7.5 MeV

    International Nuclear Information System (INIS)

    Using a partial wave analysis the angular distributions measured for the reactions 11B (p,p') 11B* and 11B (p,a) 8Be in the energy range from 4.5 to 7.5 MeV the resonance states of 12C were determined including level widths, spin, parity, and isopin. (HSI)

  14. Structural basis of chronic beryllium disease: linking allergic hypersensitivity and autoimmunity.

    Science.gov (United States)

    Clayton, Gina M; Wang, Yang; Crawford, Frances; Novikov, Andrey; Wimberly, Brian T; Kieft, Jeffrey S; Falta, Michael T; Bowerman, Natalie A; Marrack, Philippa; Fontenot, Andrew P; Dai, Shaodong; Kappler, John W

    2014-07-01

    T-cell-mediated hypersensitivity to metal cations is common in humans. How the T cell antigen receptor (TCR) recognizes these cations bound to a major histocompatibility complex (MHC) protein and self-peptide is unknown. Individuals carrying the MHCII allele, HLA-DP2, are at risk for chronic beryllium disease (CBD), a debilitating inflammatory lung condition caused by the reaction of CD4 T cells to inhaled beryllium. Here, we show that the T cell ligand is created when a Be(2+) cation becomes buried in an HLA-DP2/peptide complex, where it is coordinated by both MHC and peptide acidic amino acids. Surprisingly, the TCR does not interact with the Be(2+) itself, but rather with surface changes induced by the firmly bound Be(2+) and an accompanying Na(+) cation. Thus, CBD, by creating a new antigen by indirectly modifying the structure of preexisting self MHC-peptide complex, lies on the border between allergic hypersensitivity and autoimmunity. PMID:24995984

  15. Study of the diffusion of iron, of silver and of carbon in beryllium using radioactive tracers

    International Nuclear Information System (INIS)

    A study has been made of the diffusion of radioactive iron and silver tracers in beryllium. The following values have been found. DFe = 0.53 exp - [51800 / RT], DAg = 62 exp - [46100 / RT]. The values for iron are in good agreement with those found previously for chemical diffusion. A comparison of the diffusion coefficients for iron, silver and nickel shows that the diffusion rate increases with increasing solute atom radius. The existence has been shown of diffusion anisotropy for silver; it has been studied quantitatively on monocrystals. It is found that: Dparallel 0.41 exp - [39100 / RT], Dperpendicular = 1.98 exp - [45700 / RT]. The anisotropy decreases as the temperature increases. The silver diffuses more rapidly along the C axis than in the base plane. This result cannot be explained in terms of the model proposed for the diffusion of foreign atoms in solution in zinc. A greater number of experiments is required before a model can be put forward. An attempt has also been made to determine the diffusion coefficients of carbon in beryllium by treatment in an atmosphere of acetylene marked with C-14. Diffusion coefficients have been obtained but these should not be considered to be very significant since a chemical reaction occurs at the surface of the samples. (author)

  16. Energy Spectra And Angular Distributions Of Imfs Produced In 8-gev Proton And 12-gev Proton And Ne-20 Induced Multifragmentation Reactions (the First Results Of The Kek-ps E393 And Nirs 11p052 Experiments)

    CERN Document Server

    Tanaka, K H; Murakami, T; Ito, H; Yasuda, K; Murata, J; Muramatsu, R; Tanaka, Y J; Hirai, Y; Miyazaki, K; Tanaka, Y; Nagasaka, Y; Haseno, M; Okuno, Y; Ushie, K; Hara, H; Tsuji, S; Satake, K; Kimura, K; Kubohara, R; Shibata, Y; Kosuge, F; Nakai, K; Ochiisi, H; Kouda, S; Nakamura, H; Morinobu, S; Sugaya, Y; Ohkuma, Y; Takada, E

    2000-01-01

    Energy Spectra And Angular Distributions Of Imfs Produced In 8-gev Proton And 12-gev Proton And Ne-20 Induced Multifragmentation Reactions (the First Results Of The Kek-ps E393 And Nirs 11p052 Experiments)

  17. Study of the break reaction of Be{sup 11} on Ti{sup 48} target; the towing mode: a spectroscopic tool for the study of nuclei; Etude de la reaction de cassure du {sup 11}Be sur cible de {sup 48}Ti; le towing mode, un outil spectroscopique pour l'etude des noyaux

    Energy Technology Data Exchange (ETDEWEB)

    Lima, V

    2004-10-01

    In a towing mode reaction the projectile picks up a nucleon from the target and then breaks up by emitting one nucleon. The velocity of the emitted nucleon is boosted by the projectile velocity, leading to the emission of the nucleon in a narrow cone around the direction of the scattered projectile. This work is dedicated to the towing mode in halo nuclei such as Be{sup 11}. The experiment was performed at Ganil facility by bombarding a Ti{sup 48} target with a 41 MeV per nucleon Be{sup 11} beam, the reaction studied is: Ti{sup 48}(Be{sup 11}, Be{sup 10} + n + {gamma}). The first chapter reviews the various nuclear processes that take place when 2 nuclei collide with a particular attention for the towing mode. The second chapter is dedicated to solving the time dependant Schroedinger equation (TDSE) in order to assess the impact of various parameters such as incident energy, target charge or the linking energy of the nucleon, on the towing mode reaction. The third chapter deals with the experimental equipment and set-up including detectors and the data acquisition system. Computerized simulations have been performed in order to assess the efficiency of the detecting system, they are presented in the fourth chapter. A comparison between experimental data and the results from TDSE solving, concerning the energy spectra of the emitted particles, has enabled the author to deduce the spectroscopic factors for the different contributions of the fundamental state of Be{sup 11}, they are presented in the last chapter. The cross-sections of the towing mode are of the magnitude of several tens of milli-barns in the case of weakly bound nuclei like Be{sup 11} which make it an efficient tool to study intern structure of nuclei. (A.C.)

  18. Status of the beryllium replacement project

    International Nuclear Information System (INIS)

    Currently, beryllium (Be) is used as the filler metal for brazing appendages on the sheaths of CANDU® fuel elements. Because of its toxicity, occupational exposure limits for Be are being reduced to very low levels, resulting in significant challenges to CANDU® fuel fabricators. The CANDU® Owners Group (COG) initiated a test program to identify a filler material to replace Be and confirm that the brazed joints meet the established technical requirements for CANDU® fuel. Together with eliminating health risks associated with the use of Be, the industry needs to be assured that continuation of fuel supply remains unaffected and that fuel fabrication processes continue to comply with health and safety standards. A literature survey of studies on brazing and joining of Zircaloy identified potential filler materials that can meet or exceed existing design requirements of the brazed joint, including the required mechanical, microstructural, corrosion resistance, and irradiation properties equivalent to those obtained with Be as braze material. Candidate materials were evaluated against several criteria, including manufacturability, melting point, wettability, mechanical properties, corrosion resistance, effect on neutron economy, potential activation products, and interaction with fuel channels and other related disciplines. This exercise resulted in a list of promising candidate materials that were recommended for the first phase of testing. These materials include stainless steel (304 or 316), Al-Si, Ni-P, and Zr-Mn alloys. To allow a CANDU® utility have sufficient confidence in considering implementation of a different braze filler material, a Be Replacement Test Program, involving out-reactor and in-reactor tests, is being undertaken as a collaborative endeavour by the Canadian nuclear industry. The out-reactor tests consist of: a constructability assessment to determine the material’s suitability with current fuel manufacturing methods; evaluation of

  19. Irradiation effects on aluminium and beryllium

    International Nuclear Information System (INIS)

    .6%. Besides, due to the effects of embrittlement and swelling induced by irradiation, the HFR beryllium reflector elements had to be replaced after more than 25 years of operation. Operational and practical experiences with these reflector elements are commented, as well as main engineering features of the new reflector elements: upper-end fittings of both filler element and insert in stainless steel, no radially drilled holes and no roll pins

  20. Tritium release from beryllium discs and lithium ceramics irradiated in the SIBELIUS experiment

    International Nuclear Information System (INIS)

    The SIBELIUS experiment was designed to obtain information on the compatibility between beryllium and ceramics, as well as beryllium and steel, in a neutron environment. This experiment comprised irradiation of eight capsules, seven of which were independently purged with a He/0.1% H2 gas mixture. Four capsules were used to examine beryllium/ceramic (Li2O, LiAlO2, Li4SiO4, and Li2ZrO3) and beryllium/steel (Types 316L and 1.4914) compacts. Isothermal anneal experiments have been run on representative beryllium and ceramic disks from each of the four capsules at 550 degrees C to 850 degrees C in steps of 100 degrees C. The results indicate that tritium release from the beryllium did not exhibit burst release behavior, as previously reported, but rather a progressive release with increasing temperature. Generally, ∼99% of the tritium was released by 850 degrees C. Tritium release from the ceramic discs was quite similar to the behavior shown in other dynamic tritium release experiments on lithium ceramics. The tritium content in beryllium discs adjacent to a steel sample was found to be significantly lower than that found in a beryllium disc adjacent to a ceramic sample. Recoil of tritium from the ceramic into the beryllium appears to be the source of tritium entering the beryllium, probably residing in the beryllium oxide layer

  1. Beryllium solubility in occupational airborne particles: Sequential extraction procedure and workplace application.

    Science.gov (United States)

    Rousset, Davy; Durand, Thibaut

    2016-01-01

    Modification of an existing sequential extraction procedure for inorganic beryllium species in the particulate matter of emissions and in working areas is described. The speciation protocol was adapted to carry out beryllium extraction in closed-face cassette sampler to take wall deposits into account. This four-step sequential extraction procedure aims to separate beryllium salts, metal, and oxides from airborne particles for individual quantification. Characterization of the beryllium species according to their solubility in air samples may provide information relative to toxicity, which is potentially related to the different beryllium chemical forms. Beryllium salts (BeF(2), BeSO(4)), metallic beryllium (Bemet), and beryllium oxide (BeO) were first individually tested, and then tested in mixtures. Cassettes were spiked with these species and recovery rates were calculated. Quantitative analyses with matched matrix were performed using inductively coupled plasma mass spectrometry (ICP-MS). Method Detection Limits (MDLs) were calculated for the four matrices used in the different extraction steps. In all cases, the MDL was below 4.2 ng/sample. This method is appropriate for assessing occupational exposure to beryllium as the lowest recommended threshold limit values are 0.01 µg.m(-3) in France([) (1) (]) and 0.05 µg.m(-3) in the USA.([ 2 ]) The protocol was then tested on samples from French factories where occupational beryllium exposure was suspected. Beryllium solubility was variable between factories and among the same workplace between different tasks. PMID:26327570

  2. Comparison of elevated temperature properties of HIP'd impact ground beryllium (S-65-H) and HIP'd gas atomized (GA) beryllium

    International Nuclear Information System (INIS)

    Fusion designers have been limited to simple tensile properties and physical properties for modern beryllium grades. The work reported here expands the elevated temperature database to more complicated mechanical tests. The elevated temperature (ambient to 648 C) thermomechanical properties of two beryllium grades made by hot isostatic pressing (HIP) are compared: S-65H (made from impact ground powder) and GA (made from gas atomized powder). Successful measurements of elevated temperature smooth and notched fatigue were made for the first time on modern beryllium grades. Valid beryllium KIC fracture toughness results were obtained for the first time at temperatures above room temperature. Elevated temperature creep, and tensile are also presented. (orig.)

  3. Reducing the cost of S-65C grade beryllium for ITER first wall applications

    International Nuclear Information System (INIS)

    Beryllium is the current material of choice for plasma-facing components in ITER. The present design is for 10 mm thick beryllium tiles bonded to an actively cooled copper substrate. Brush Wellman grade S65C beryllium is preferred grade off beryllium for these tiles. S65C has the best resistance to low-cycle thermal fatigue than any other beryllium grad in the world. S65C grade beryllium has been successfully deployed in fusion reactors for more than two decades, most recently in the JET reactor. This paper will detail a supply chain to produce the most cost-effective S65C plasma facing components for ITER. This paper will also propose some future work too demonstrate the best technology for bonding beryllium to copper. (author)

  4. TEM study of impurity segregations in beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Klimenkov, M., E-mail: michael.klimenkov@kit.edu [Institute for Applied Materials – Applied Materials Physics, Karlsruhe Institute of Technology, Hermann-von-Helmholz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Chakin, V.; Moeslang, A. [Institute for Applied Materials – Applied Materials Physics, Karlsruhe Institute of Technology, Hermann-von-Helmholz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Rolli, R. [Institute for Applied Materials – Materials and Biomechanics, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2014-12-15

    Beryllium is planned to be used as a neutron multiplier in the Helium-cooled Pebble Bed European concept of a breeding blanket of demonstration power reactor DEMO. In order to evaluate the irradiation performance, individual pebbles and constrained pebble beds were neutron-irradiated at temperatures typical of fusion blankets. Beryllium pebbles 1 mm in diameter produced by the rotating electrode method were subjected to a TEM study before and after irradiation at High Flux Reactor, Petten, Netherlands at 861 K. The grain size varied in a wide range from sub-micron size up to several tens of micrometers, which indicated formation bimodal grain size distribution. Based on the application of combined electron energy loss spectroscopy and energy dispersive X-ray spectroscopy methods, we suggest that impurity precipitates play an important role in controlling the mechanical properties of beryllium. The impurity elements were present in beryllium at a sub-percent concentration form beryllide particles of a complex (Fe/Al/Mn/Cr)B composition. These particles are often ordered along dislocations lines, forming several micron-long chains. It can be suggested that fracture surfaces often extended along these chains in irradiated material.

  5. Beryllium abundances in stars with planets:Extending the sample

    CERN Document Server

    Gálvez-Ortiz, M C; Hernández, J I González; Israelian, G; Santos, N C; Rebolo, R; Ecuvillon, A

    2011-01-01

    Context: Chemical abundances of light elements as beryllium in planet-host stars allow us to study the planet formation scenarios and/or investigate possible surface pollution processes. Aims: We present here an extension of previous beryllium abundance studies. The complete sample consists of 70 stars hosting planets and 30 stars without known planetary companions. The aim of this paper is to further assess the trends found in previous studies with less number of objects. This will provide more information on the processes of depletion and mixing of light elements in the interior of late type stars, and will provide possible explanations for the abundance differences between stars that host planets and "single" stars. Methods: Using high resolution UVES spectra, we measure beryllium abundances of 26 stars that host planets and 1 "single" star mainly using the \\lambda 3131.065 A Be II line, by fitting synthetic spectra to the observational data. We also compile beryllium abundance measurements of 44 stars hos...

  6. TEM study of impurity segregations in beryllium pebbles

    Science.gov (United States)

    Klimenkov, M.; Chakin, V.; Moeslang, A.; Rolli, R.

    2014-12-01

    Beryllium is planned to be used as a neutron multiplier in the Helium-cooled Pebble Bed European concept of a breeding blanket of demonstration power reactor DEMO. In order to evaluate the irradiation performance, individual pebbles and constrained pebble beds were neutron-irradiated at temperatures typical of fusion blankets. Beryllium pebbles 1 mm in diameter produced by the rotating electrode method were subjected to a TEM study before and after irradiation at High Flux Reactor, Petten, Netherlands at 861 K. The grain size varied in a wide range from sub-micron size up to several tens of micrometers, which indicated formation bimodal grain size distribution. Based on the application of combined electron energy loss spectroscopy and energy dispersive X-ray spectroscopy methods, we suggest that impurity precipitates play an important role in controlling the mechanical properties of beryllium. The impurity elements were present in beryllium at a sub-percent concentration form beryllide particles of a complex (Fe/Al/Mn/Cr)B composition. These particles are often ordered along dislocations lines, forming several micron-long chains. It can be suggested that fracture surfaces often extended along these chains in irradiated material.

  7. Influence of impurities in Beryllium on tritium breeding ratio

    International Nuclear Information System (INIS)

    Several neutronics experiments simulating fusion blankets have been conducted with 14 MeV neutron source to assess the reliability of nuclear analysis codes. However, the analyses have not always presented good agreements so far between calculated and measured tritium production rates. One of the reasons was considered as impurities in beryllium which has negligibly small neutron absorption cross section in low energy range. Chemical compositions of beryllium were analyzed by Inductively Coupled Plasma (ICP) method, and a pulsed neutron decay experiment discovered that the macroscopic neutron absorption cross section for beryllium medium may be about 30% larger than the value calculated by the data specified by manufacturing company. The influence of the impurities on the calculations was studied on the basis of the fusion DEMO-reactor blanket design. As a result of the study, it was made clear that the impurities affect the local tritium production rates when the size of beryllium medium is more than 20-30 mean free paths (30-40 cm) in thickness. In case of some blanket designs that meet the above condition, the effect on tritium breeding ratio may become as large as about 4%. (author)

  8. Thermal cycling tests of actively cooled beryllium copper joints

    International Nuclear Information System (INIS)

    Screening tests (steady state heating) and thermal fatigue tests with several kinds of beryllium-copper joints have been performed in an electron beam facility. Joining techniques under investigation were brazing with silver containing and silver-free braze materials, hot isostatic pressing (HIP) and diffusion bonding (hot pressing). Best thermal fatigue performance was found for the brazed samples. (author)

  9. Extraction of lead and beryllium from a firing site soil

    International Nuclear Information System (INIS)

    The Dual Axis Radiographic Hydrodynamic Test (DARHT) program is being implemented at LANL to conduct tests for evaluating the stability of the nation's aging nuclear stockpile. In order to reduce impact on the environment, containment of the non-fissile explosives tests is being phased in. The resulting shot debris can contain a mix of depleted uranium, lead, and beryllium. We are developing a treatment scheme to separate the radioactive and RCRA-hazardous components in order to recover the uranium, re-use some materials in future shots, and minimize waste for disposal. Our experience using a proprietary water soluble polymer to extract lead from contaminated soil to below TCLP levels has been extended to a surrogate soil from an open-air firing site that contains both lead and beryllium. Results for lead removal from this soil by dendrimers and molecular chelators will also be shown. Because of the potentially severe inhalation hazard associated with beryllium, the fate of this metal in our treatment scheme has been investigated, as well as extraction of beryllium using a variety of chemical agents

  10. Correlation of acoustic emission and dislocation damping in beryllium

    International Nuclear Information System (INIS)

    In a study of the acoustic emission generated in beryllium during tensile deformation, there is substantial evidence showing that the burst rate peak at yield is due to the generation of new dislocations and the burst rate peak at higher strains is due to the breakaway of dislocation line segments from deformation produce pins

  11. Thermal cycling tests of actively cooled beryllium copper joints

    Energy Technology Data Exchange (ETDEWEB)

    Roedig, M.; Duwe, R.; Linke, J.; Schuster, A.; Wiechers, B. [Forschungszentrum Juelich GmbH (Germany)

    1998-01-01

    Screening tests (steady state heating) and thermal fatigue tests with several kinds of beryllium-copper joints have been performed in an electron beam facility. Joining techniques under investigation were brazing with silver containing and silver-free braze materials, hot isostatic pressing (HIP) and diffusion bonding (hot pressing). Best thermal fatigue performance was found for the brazed samples. (author)

  12. Beryllium Wipe Sampling (differing methods - differing exposure potentials)

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, Kent

    2005-03-09

    This research compared three wipe sampling techniques currently used to test for beryllium contamination on room and equipment surfaces in Department of Energy facilities. Efficiencies of removal of beryllium contamination from typical painted surfaces were tested by wipe sampling without a wetting agent, with water-moistened wipe materials, and by methanol-moistened wipes. Analysis indicated that methanol-moistened wipe sampling removed about twice as much beryllium/oil-film surface contamination as water-moistened wipes, which removed about twice as much residue as dry wipes. Criteria at 10 CFR 850.30 and .31 were established on unspecified wipe sampling method(s). The results of this study reveal a need to identify criteria-setting method and equivalency factors. As facilities change wipe sampling methods among the three compared in this study, these results may be useful for approximate correlations. Accurate decontamination decision-making depends on the selection of appropriate wetting agents for the types of residues and surfaces. Evidence for beryllium sensitization via skin exposure argues in favor of wipe sampling with wetting agents that provide enhanced removal efficiency such as methanol when surface contamination includes oil mist residue.

  13. High-performance liquid chromatographic method to evaluate the hydrogen atom transfer during reaction between 1,1-diphenyl-2-picryl-hydrazyl radical and antioxidants

    International Nuclear Information System (INIS)

    Highlights: ► Both 1,1-diphenyl-2-picrylhydrazyl radical and its product measurement by HPLC. ► Lowest limit of detection by monitoring 1,1-diphenyl-2-picryl-hydrazine. ► Adsorption problem of the radical on HPLC parts have been pointed out. - Abstract: 1,1-Diphenyl-2-picrylhydrazyl (DPPH·) is a stable nitrogen centred radical widely used to evaluate direct radical scavenging properties of various synthetic or natural antioxidants (AOs). The bleaching rate of DPPH· absorbance at 515 nm is usually monitored for this purpose. In order to avoid the interference of complex coloured natural products used as antioxidant supplements or cosmetics, HPLC systems have been reported as alternative techniques to spectrophotometry. They also rely upon measurement of DPPH· quenching rate and none of them permits to identify and measure 1,1-diphenyl-2-picryl-hydrazine (DPPH-H), the reduced product of DPPH· resulting from hydrogen atom transfer (HAT), which is the main mechanism of the reaction between DPPH· and AOs. We presently report an HPLC method devoted to the simultaneous measurement of DPPH· and DPPH-H. Both were fully separated on a C18 column eluted with acetonitrile–10 mM ammonium citrate buffer pH 6.8 (70:30, v/v) and detected at 330 nm. Adsorption process of DPPH· onto materials of the HPLC system was pointed out. Consequently, the linearity range observed for DPPH· was restricted, thus a much lower limit of detection was obtained for DPPH-H than for DPPH· using standards (0.02 and 14 μM, respectively). The method was applied to three commonly used AOs, i.e. Trolox®, ascorbic acid and GSH, and compared with spectrophotometry. Further application to complex matrices (cell culture media, vegetal extracts) and nanomaterials demonstrated (i) its usefulness because of higher selectivity than colorimetry, and (ii) its help to investigate the mechanisms occurring with the free radical.

  14. 27 CFR 478.11 - Meaning of terms.

    Science.gov (United States)

    2010-04-01

    ... tungsten alloys, steel, iron, brass, bronze, beryllium copper, or depleted uranium; or full jacketed... established pursuant to 25 CFR part 11.); (2) Has, as an element, the use or attempted use of physical force.... 1226)) Editorial Note: For Federal Register citations affecting § 478.11, see the List of CFR...

  15. Identification of an abnormal beryllium lymphocyte proliferation test

    International Nuclear Information System (INIS)

    The potential hazards from exposure to beryllium or beryllium compounds in the workplace were first reported in the 1930s. The tritiated thymidine beryllium lymphocyte proliferation test (BeLPT) is an in vitro blood test that is widely used to screen beryllium exposed workers in the nuclear industry for sensitivity to beryllium. The clinical significance of the BeLPT was described and a standard protocol was developed in the late 1980s. Cell proliferation is measured by the incorporation of tritiated thymidine into dividing cells on two culture dates and using three concentrations of beryllium sulfate. Results are expressed as a 'stimulation index' (SI) which is the ratio of the amount of tritiated thymidine (measured by beta counts) in the simulated cells divided by the counts for the unstimulated cells on the same culture day. Several statistical methods for use in the routine analysis of the BeLPT were proposed in the early 1990s. The least absolute values (LAV) method was recommended for routine analysis of the BeLPT. This report further evaluates the LAV method using new data, and proposes a new method for identification of an abnormal or borderline test. This new statistical-biological positive (SBP) method reflects the clinical judgment that: (i) at least two SIs show a 'positive' response to beryllium; and (ii) that the maximum of the six SIs must exceed a cut-point that is determined from a reference data set of normal individuals whose blood has been tested by the same method in the same serum. The new data is from the Y-12 National Security Complex in Oak Ridge (Y-12) and consists of 1080 workers and 33 non-exposed control BeLPTs (all tested in the same serum). Graphical results are presented to explain the statistical method, and the new SBP method is applied to the Y-12 group. The true positive rate and specificity of the new method were estimated to be 86% and 97%, respectively. An electronic notebook that is accessible via the Internet was used in

  16. Some features of beryllium corrosion behavior in Be-liquid Li-V-4Ti-4Cr alloy system

    International Nuclear Information System (INIS)

    Recent experimental results on beryllium corrosion behavior in a V-4Ti-4Cr alloy, liquid lithium static system during testing for 200-500 h at temperatures from 600 to 800 deg. C are presented. The influence of test conditions (temperature, duration and lithium purity) and beryllium characteristics (microstructure, grain size and chemical composition) on weight loss of beryllium and penetration of lithium into beryllium are discussed. Results of compressive tests for beryllium specimens before and after corrosion testing are also introduced

  17. A review of reaction rates and thermodynamic and transport properties for an 11-species air model for chemical and thermal nonequilibrium calculations to 30000 K

    Science.gov (United States)

    Gupta, Roop N.; Yos, Jerrold M.; Thompson, Richard A.; Lee, Kam-Pui

    1990-01-01

    Reaction rate coefficients and thermodynamic and transport properties are reviewed and supplemented for the 11-species air model which can be used for analyzing flows in chemical and thermal nonequilibrium up to temperatures of 3000 K. Such flows will likely occur around currently planned and future hypersonic vehicles. Guidelines for determining the state of the surrounding environment are provided. Curve fits are given for the various species properties for their efficient computation in flowfield codes. Approximate and more exact formulas are provided for computing the properties of partially ionized air mixtures in a high energy environment. Limitations of the approximate mixing laws are discussed for a mixture of ionized species. An electron number-density correction for the transport properties of the charged species is obtained. This correction has been generally ignored in the literature.

  18. Measurement of the 12C(e,e'p)11B Two-Body Breakup Reaction at High Missing Momentum Values

    Energy Technology Data Exchange (ETDEWEB)

    Monaghan, P; Shneor, R; Subedi, R; Anderson, B D; Aniol, K; Annand, J; Arrington, J; Benaoum, H; Benmokhtar, F; Bertin, P; Bertozzi, W; Boeglin, W; Chen, J P; Choi, Seonho; Chudakov, E; Ciofi degli-Atti, C; Cisbani, E; Cosyn, W; Craver, B; de Jager, C W; Feuerbach, R J; Folts, E; Frullani, S; Garibaldi, F; Gayou, O; Gilad, S; Gilman, R; Glamazdin, O; Gomez, J; Hansen, O; Higinbotham, D W; Holmstrom, T; Ibrahim, H; Igarashi, R; Jans, E; Jiang, X; Jiang, Y; Kaufman, L; Kelleher, A; Kolarkar, A; Kuchina, E; Kumbartzki, G; LeRose, J J; Lindgren, R; Liyanage, N; Margaziotis, D J; Markowitz, P; Marrone, S; Mazouz, M; Meekins, D; Michaels, R; Moffit, B; Morita, H; Nanda, S; Perdrisat, C F; Piasetzky, E; Potokar, M; Punjabi, V; Qiang, Y; Reinhold, J; Reitz, B; Ron, G; Rosner, G; Ryckebusch, J; Saha, A; Sawatzky, B; Segal, J; Shahinyan, A; Sirca, S; Slifer, K; Solvignon, P; Sulkosky, V; Thompson, N; Ulmer, P E; Urciuoli, G M; Voutier, E; Wang, K; Watson, J W; Weinstein, L B; Wojtsekhowski, B; Wood, S; Yao, H; Zheng, X; Zhu, L

    2014-08-01

    The five-fold differential cross section for the 12C(e,e'p)11B reaction was determined over a missing momentum range of 200-400 MeV/c, in a kinematics regime with Bjorken x > 1 and Q2 = 2.0 (GeV/c)2. A comparison of the results and theoretical models and previous lower missing momentum data is shown. The theoretical calculations agree well with the data up to a missing momentum value of 325 MeV/c and then diverge for larger missing momenta. The extracted distorted momentum distribution is shown to be consistent with previous data and extends the range of available data up to 400 MeV/c.

  19. Measurement of the 12C(e,e'p)11B Two-Body Breakup Reaction at High Missing Momentum Values

    CERN Document Server

    Monaghan, P; Subedi, R; Anderson, B D; Aniol, K; Annand, J; Arrington, J; Benaoum, H; Benmokhtar, F; Bertin, P; Bertozzi, W; Boeglin, W; Chen, J P; Choi, Seonho; Chudakov, E; Atti, C Ciofi degli; Cisbani, E; Cosyn, W; Craver, B; de Jager, C W; Feuerbach, R J; Folts, E; Frullani, S; Garibaldi, F; Gayou, O; Gilad, S; Gilman, R; Glamazdin, O; Gomez, J; Hansen, O; Higinbotham, D W; Holmstrom, T; Ibrahim, H; Igarashi, R; Jans, E; Jiang, X; Jiang, Y; Kaufman, L; Kelleher, A; Kolarkar, A; Kuchina, E; Kumbartzki, G; LeRose, J J; Lindgren, R; Liyanage, N; Margaziotis, D J; Markowitz, P; Marrone, S; Mazouz, M; Meekins, D; Michaels, R; Moffit, B; Morita, H; Nanda, S; Perdrisat, C F; Piasetzky, E; Potokar, M; Punjabi, V; Qiang, Y; Reinhold, J; Reitz, B; Ron, G; Rosner, G; Ryckebusch, J; Saha, A; Sawatzky, B; Segal, J; Shahinyan, A; Sirca, S; Slifer, K; Solvignon, P; Sulkosky, V; Thompson, N; Ulmer, P E; Urciuoli, G M; Voutier, E; Wang, K; Watson, J W; Weinstein, L B; Wojtsekhowski, B; Wood, S; Yao, H; Zheng, X; Zhu, L

    2013-01-01

    The five-fold differential cross section for the 12C(e,e'p)11B reaction was determined over a missing momentum range of 200-400 MeV/c, in a kinematics regime with Bjorken x > 1 and Q2 = 2.0 (GeV/c)2. A comparison of the results and theoretical models and previous lower missing momentum data is shown. The theoretical calculations agree well with the data up to a missing momentum value of 325 MeV/c and then diverge for larger missing momenta. The extracted distorted momentum distribution is shown to be consistent with previous data and extends the range of available data up to 400 MeV/c.

  20. Synthesis of Be–Ti–V ternary beryllium intermetallic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae-Hwan, E-mail: kim.jaehwan@jaea.go.jp; Nakamichi, Masaru

    2015-08-15

    Highlights: • Preliminary synthesis of ternary Be–Ti–V beryllides was investigated. • An area fraction of Be phase increased with increase of V amount in the beryllide because of increasing melting temperature. • The increase of Be phase fraction resulted in increase of weight gain as well as H{sub 2} generation. • The beryllides with lower V contents indicated to better phase stability at high temperature. - Abstract: Beryllium intermetallic compounds (beryllides) such as Be{sub 12}Ti and Be{sub 12}V are the most promising advanced neutron multipliers in demonstration power reactors. Advanced neutron multipliers are being developed by Japan and the EU as part of their Broader Approach activities. It has been previously shown, however, that beryllides are too brittle to fabricate into pebble- or rod-like shapes using conventional methods such as arc melting and hot isostatic pressing. To overcome this issue, we developed a new combined plasma sintering and rotating electrode method for the fabrication of beryllide rods and pebbles. Previously, we prepared a beryllide pebble with a Be–7.7 at.% Ti composition as the stoichiometric value of the Be{sub 12}Ti phase; however, Be{sub 17}Ti{sub 2} and Be phases were present along with the Be{sub 12}Ti phase that formed as the result of a peritectic reaction due to re-melting during granulation using the rotating electrode method. This Be phase was found to be highly reactive with oxygen and water vapor. Accordingly, to investigate the Be phase reduction and applicability for fabrication of electrodes prior to granulation using the rotating electrode method, Be–Ti–V ternary beryllides were synthesized using the plasma sintering method. Surface observation results indicated that increasing plasma sintering time and V addition led to an increase in the intermetallic compound phases compared with plasma-sintered beryllide with a Be–7.7 at.% Ti composition. Additionally, evaluation of the reactivity of

  1. Measurement and microscopic analysis of the 11B(p,p') reaction at Ep = 150 MeV. Part I: Inelastic scattering

    International Nuclear Information System (INIS)

    Cross sections and analyzing powers for the 11B(p.p') reaction have been measured using a 150 MeV polarized proton beam from the AGOR cyclotron at KVI. For the stronger inelastic transitions, also spin-flip probabilities have been extracted. A fully microscopic distorted-wave analysis of the elastic and inelastic data has been made, using density-dependent effective interactions and input from shell-model calculations in a complete (0+2) ℎω model space for normal parity transitions and in a 1 ℎω model space for non-normal parity transitions. With the help of these model calculations spin-isovector M1 strengths for the negative-parity states at excitation energies of 2.125 MeV (Jπ = 1/2-), 4.445 MeV (Jπ 5/2-), 5.020 MeV (Jπ = 3/2-) and 8.920 MeV (Jπ 5/2-) have been extracted and compared to known Gamow-Teller strengths for the analog transitions to 11C

  2. Hyperon and negative particle production at central rapidity in proton-Beryllium interactions at 158 GeV/c

    International Nuclear Information System (INIS)

    A study of the strangeness enhancement in Lead-Lead collisions with respect to proton-induced reactions is being carried out at the CERN SPS by the WA97 experiment: up to now, data from proton-Lead collisions have been used as a reference sample. In this paper we report on a study of particle production in proton-Beryllium collisions. These collisions are expected to constitute a better reference sample than p-Pb, because of the lighter target. The analysis of hyperon and negative particle production is presented and the results are compared with those previously obtained from Pb-Pb and p-Pb collisions

  3. Hyperon and negative particle production at central rapidity in proton-beryllium interactions at 158 GeV/c

    CERN Document Server

    Antinori, Federico; Beusch, Werner; Bloodworth, Ian J; Caliandro, R; Carrer, N; Di Bari, D; Di Liberto, S; Elia, D; Evans, D; Fanebust, K; Fini, R A; Ftácnik, J; Ghidini, B; Grella, G; Helstrup, H; Holme, A K; Huss, D; Jacholkowski, A; Jones, G T; Kinson, J B; Knudson, K P; Králik, I; Lenti, V; Lietava, R; Loconsole, R A; Løvhøiden, G; Manzari, V; Mazzoni, M A; Meddi, F; Michalon, A; Michalon-Mentzer, M E; Morando, M; Norman, P I; Pastircák, B; Quercigh, Emanuele; Romano, G; Safarík, K; Sándor, L; Segato, G F; Staroba, P; Thompson, M; Thorsteinsen, T F; Torrieri, G D; Tveter, T S; Urbán, J; Villalobos Baillie, O; Virgili, T; Votruba, M F; Závada, P

    1999-01-01

    A study of the strangeness enhancement in lead-lead collisions with respect to proton-induced reactions is being carried out at the CERN SPS by the WA97 experiment: up to now, data from proton-lead collisions have been used as a reference sample. In this paper we report on a study of particle production in proton-beryllium collisions. These collisions are expected to constitute a better reference sample than p-Pb, because of the lighter target. The analysis of hyperon and negative particle production is presented and the results are compared with those previously obtained from Pb-Pb and p-Pb collisions. (6 refs).

  4. Fallout beryllium-7 as a soil and sediment tracer in river basins: current status and needs

    Science.gov (United States)

    Taylor, Alex; Blake, Will H.; Smith, Hugh G.; Mabit, Lionel; Keith-Roach, Miranda J.

    2013-04-01

    Beryllium-7 is a cosmogenic radionuclide formed in the upper atmosphere by cosmic ray spallation of nitrogen and oxygen. Its constant natural production and fallout via precipitation coupled with its ability to bind to soil particles have underpinned its application as a sediment tracer. The short half-life of beryllium-7 (53.3 days) lends itself to tracing sediment dynamics over short time periods, thus, enabling assessment of the effect of land use change upon soil redistribution. Although beryllium-7 has been widely applied as a tracer to date, there remain crucial gaps in understanding relating to the assumptions for its use. To further support the application of beryllium-7 as a tracer across a range of environments requires consideration of both the current strengths and shortcomings of the technique to direct research needs. Here we review research surrounding the assumptions underpinning beryllium-7 use as a tracer and identify key knowledge gaps relating to i) the effects of rain shadowing and vegetation interception upon beryllium-7 fallout uniformity at the hillslope-scale; ii) the effect of preferential flow pathways upon beryllium-7 depth distribution in soil and overland flow upon beryllium-7 inventory uniformity and iii) the potential for beryllium-7 desorption in saline and reducing environments. To provide continued support for the use of beryllium-7 as a hillslope and catchment-scale tracer, there is an urgent need to undertake further research to quantify the effect of these factors upon tracer estimates.

  5. Three-coordinate beryllium β-diketiminates: synthesis and reduction chemistry.

    Science.gov (United States)

    Arrowsmith, Merle; Hill, Michael S; Kociok-Köhn, Gabriele; MacDougall, Dugald J; Mahon, Mary F; Mallov, Ian

    2012-12-17

    A series of mononuclear, heteroleptic beryllium complexes supported by the monoanionic β-diketiminate ligand [HC{CMeNDipp}(2)](-) (L; Dipp = 2,6-diisopropylphenyl) have been synthesized. Halide complexes of the form [LBeX] (X = Cl, I) and a bis(trimethylsilyl)amide complex were produced via salt metathesis routes. Alkylberyllium β-diketiminate complexes of the form [LBeR] (R = Me, (n)Bu) were obtained by salt metathesis from the chloride precursor [LBeCl]. Controlled hydrolysis of [LBeMe] afforded an air-stable, monomeric β-diketiminatoberyllium hydroxide complex. [LBeMe] also underwent facile protonolysis with alcohols to form the corresponding β-diketiminatoberyllium alkoxides [LBeOR] (R = Me, (t)Bu, Ph). High temperatures and prolonged reaction times were required for protonolysis of [LBeMe] with primary amines to yield the β-diketiminatoberyllium amide complexes [LBeNHR] (R = (n)Bu, CH(2)Ph, Ph). No reactions were observed between [LBeMe] and silanes, terminal acetylenes, or secondary amines. All compounds were characterized by (1)H, (13)C, and (9)Be NMR spectroscopy and, in most cases, by X-ray crystallography. Reduction of the beryllium chloride complex with potassium metal resulted in apparent hydrogen-atom transfer between two β-diketiminate backbones, yielding two dimeric, potassium chloride bridged diamidoberyllium species. X-ray analysis of a cocrystallized mixture of the 18-crown-6 adducts of these species allowed unambiguous identification of the two reduced diketiminate ligands, one of which had been deprotonated at a backbone methyl substituent and the other reduced by hydride addition to the β-imine position. It is proposed that this process occurs by the formation of an unobserved radical anion species and intermolecular hydrogen-atom transfer by a radical-based hydrogen abstraction mechanism. PMID:23215345

  6. Metallic beryllium-7 target of small diameter

    CERN Document Server

    Zyuzin, A Yu; Vincent, J S; Buckley, K R; Bateman, N P; Snover, K A; Csandjan, J M; Steiger, T D; Adelberger, E G; Swanson, H E

    1999-01-01

    The stellar sup 7 Be(p, gamma) sup 8 B reaction rate has the largest uncertainty among all nuclear reaction rates in the standard solar model. However, the solar neutrino flux predicted for the majority of proposed and existing solar neutrino detectors is directly dependent on the rate of sup 7 Be(p, gamma) sup 8 B reaction. The existing solar neutrino detectors measure rate of sup 8 B decay neutrinos that is too low. This constitutes largely the solar neutrino problem. Existing measurements of the sup 7 Be(p, gamma) sup 8 B reaction rate disagree with one another, indicating the need for more precise experiments. To provide the required targets a new procedure for sup 7 Be production, separation and target manufacturing has been developed. First, a lithium target has been designed for sup 7 Be production at TRIUMF's 13 MeV cyclotron. The lithium target has been extensively tested at 50 mu A proton beam current yielding 8.1 MBq/mu A h of sup 7 Be. An adsorption filtration technique has been developed for sup ...

  7. Mechanical properties of S-65C grade beryllium at elevated temperatures

    International Nuclear Information System (INIS)

    Tensile property measurements and fractographic analysis of S-65C beryllium are reviewed. Tests were performed on specimens oriented in the longitudinal and transverse directions with respect to the direction of vacuum hot-pressing. Specimens were tested in air at RT, 100degC, 200degC, 300degC, 415degC and 500degC at an initial strain rate of 1.1 x 10-4 sec-1. Ductility of the material was strongly affected by the test temperature, exhibiting a peak ductility at 300degC. The material displayed a yield point phenomenon which was most pronounced at this same temperature. Scanning electron microscopy was performed on the resulting fracture surfaces and observations are reported. (author)

  8. Mechanical properties of S-65C grade beryllium at elevated temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Goods, S.H. [Sandia National Lab., Livermore, CA (United States); Dombrowski, D.E.

    1998-01-01

    Tensile property measurements and fractographic analysis of S-65C beryllium are reviewed. Tests were performed on specimens oriented in the longitudinal and transverse directions with respect to the direction of vacuum hot-pressing. Specimens were tested in air at RT, 100degC, 200degC, 300degC, 415degC and 500degC at an initial strain rate of 1.1 x 10{sup -4} sec{sup -1}. Ductility of the material was strongly affected by the test temperature, exhibiting a peak ductility at 300degC. The material displayed a yield point phenomenon which was most pronounced at this same temperature. Scanning electron microscopy was performed on the resulting fracture surfaces and observations are reported. (author)

  9. High-performance liquid chromatographic method to evaluate the hydrogen atom transfer during reaction between 1,1-diphenyl-2-picryl-hydrazyl radical and antioxidants

    Energy Technology Data Exchange (ETDEWEB)

    Boudier, Ariane; Tournebize, Juliana [CITHEFOR - EA 3452, Faculte de Pharmacie, Nancy-Universite, 5 Rue Albert Lebrun, BP 80403, 54001 Nancy Cedex (France); Bartosz, Grzegorz [Department of Molecular Biophysics, University of Lodz, Lodz (Poland); El Hani, Safae; Bengueddour, Rachid [Laboratoire de Nutrition et Sante, Biology Department, Faculty of Sciences, Ibn Tofail University, Kenitra (Morocco); Sapin-Minet, Anne [CITHEFOR - EA 3452, Faculte de Pharmacie, Nancy-Universite, 5 Rue Albert Lebrun, BP 80403, 54001 Nancy Cedex (France); Leroy, Pierre, E-mail: pierre.leroy@pharma.uhp-nancy.fr [CITHEFOR - EA 3452, Faculte de Pharmacie, Nancy-Universite, 5 Rue Albert Lebrun, BP 80403, 54001 Nancy Cedex (France)

    2012-01-20

    Highlights: Black-Right-Pointing-Pointer Both 1,1-diphenyl-2-picrylhydrazyl radical and its product measurement by HPLC. Black-Right-Pointing-Pointer Lowest limit of detection by monitoring 1,1-diphenyl-2-picryl-hydrazine. Black-Right-Pointing-Pointer Adsorption problem of the radical on HPLC parts have been pointed out. - Abstract: 1,1-Diphenyl-2-picrylhydrazyl (DPPH{center_dot}) is a stable nitrogen centred radical widely used to evaluate direct radical scavenging properties of various synthetic or natural antioxidants (AOs). The bleaching rate of DPPH{center_dot} absorbance at 515 nm is usually monitored for this purpose. In order to avoid the interference of complex coloured natural products used as antioxidant supplements or cosmetics, HPLC systems have been reported as alternative techniques to spectrophotometry. They also rely upon measurement of DPPH{center_dot} quenching rate and none of them permits to identify and measure 1,1-diphenyl-2-picryl-hydrazine (DPPH-H), the reduced product of DPPH{center_dot} resulting from hydrogen atom transfer (HAT), which is the main mechanism of the reaction between DPPH{center_dot} and AOs. We presently report an HPLC method devoted to the simultaneous measurement of DPPH{center_dot} and DPPH-H. Both were fully separated on a C18 column eluted with acetonitrile-10 mM ammonium citrate buffer pH 6.8 (70:30, v/v) and detected at 330 nm. Adsorption process of DPPH{center_dot} onto materials of the HPLC system was pointed out. Consequently, the linearity range observed for DPPH{center_dot} was restricted, thus a much lower limit of detection was obtained for DPPH-H than for DPPH{center_dot} using standards (0.02 and 14 {mu}M, respectively). The method was applied to three commonly used AOs, i.e. Trolox{sup Registered-Sign }, ascorbic acid and GSH, and compared with spectrophotometry. Further application to complex matrices (cell culture media, vegetal extracts) and nanomaterials demonstrated (i) its usefulness because of

  10. Proceedings of the 8th specialist meeting on recycling of irradiated Beryllium

    International Nuclear Information System (INIS)

    This report summarizes the documents presented in the 8th Specialist Meeting on Recycling of Irradiated Beryllium, which was held on October 28, 2013, in Bariloche, Río Negro, Argentina, hosted by INVAP and CNEA (Comision Nacional de Energia Atomica). The objective of the meeting is to exchange the information of current status and future plan for beryllium study in the Research/Testing reactors, and to make a discussion of “How to cooperate”. There were 20 participants from USA, Japan, Korea, Austria and Argentina. In this meeting, information exchange of current status and future plan for beryllium study was carried out for the Research/Testing reactor fields, and evaluation results of beryllium materials were discussed based on new irradiated beryllium data such as swelling, deformation, gas release and so on. The subject of the used beryllium recycling was also discussed for the enforcement of demonstration recycling tests. (author)

  11. JET-ISX-B beryllium limiter experiment safety analysis report and operational safety requirements

    International Nuclear Information System (INIS)

    An experiment to evaluate the suitability of beryllium as a limiter material has been completed on the ISX-B tokamak. The experiment consisted of two phases: (1) the initial operation and characterization in the ISX experiment, and a period of continued operation to the specified surface fluence (1022 atoms/cm2) of hydrogen ions; and (2) the disassembly, decontamination, or disposal of the ISX facility. During these two phases of the project, the possibility existed for beryllium and/or beryllium oxide powder to be produced inside the vacuum vessel. Beryllium dust is a highly toxic material, and extensive precautions are required to prevent the release of the beryllium into the experimental work area and to prevent the contamination of personnel working on the device. Details of the health hazards associated with beryllium and the appropriate precautions are presented. Also described in appendixes to this report are the various operational safety requirements for the project

  12. Beryllium coating produced by evaporation-condensation method and some their properties

    Energy Technology Data Exchange (ETDEWEB)

    Pepekin, G.I.; Anisimov, A.B.; Chernikov, A.S.; Mozherinn, S.I.; Pirogov, A.A. [SRI SIA Lutch., Podolsk (Russian Federation)

    1998-01-01

    The method of vacuum evaporation-condensation for deposition of beryllium coatings on metal substrates, considered in the paper, side by side with a plasma-spray method is attractive fon ITER application. In particular this technique may be useful for repair the surface of eroded tiles which is operated in a strong magnetic field. The possibility of deposition of beryllium coatings with the rate of layer growth 0.1-0.2 mm/h is shown. The compatibility of beryllium coating with copper or stainless steel substrate is provided due to intermediate barrier. The results of examination of microstructure, microhardness, porosity, thermal and physical properties and stability under thermal cycling of beryllium materials are presented. The value of thermal expansion coefficient and thermal conductivity of condensed beryllium are approximately the same as for industrial grade material produced by powder mettalurgy technique. However, the condensed beryllium has higher purity (up to 99.9-99.99 % wt.). (author)

  13. 5. IEA International workshop on beryllium technology for fusion. Book of abstracts

    International Nuclear Information System (INIS)

    The collection includes the abstracts of reports presented to the 5-th IEA international workshop on beryllium technology for fusion. The themes of reports are as follows: status of beryllium technology for fusion in Russia; manufacturing and testing of Be armoured first wall mock-up for ITER; development of the process of diffusion welding of metals stainless steel-copper-beryllium into a single composite; some features of beryllium-laser beam interaction; the effect of irradiation dose on tritium and helium release from neutron irradiated beryllium; thermal properties of neutron irradiated Be12Ti. The results of investigating the mechanical properties variation and swelling of beryllium under high temperature neutron irradiation are presented

  14. Quantum-chemical approach to cohesive properties of metallic beryllium

    International Nuclear Information System (INIS)

    Calculations based upon the incremental approach, i.e. an expansion of the correlation energy in terms of one-body, two-body, and higher-order contributions from localized orbital groups, have been performed for metallic beryllium. We apply an embedding scheme which has been successfully applied recently to ground-state properties of magnesium and group 12 elements. This scheme forces localization in metallic-like model systems and allows for a gradual delocalization within the incremental approach. Quantum-chemical methods of the coupled-cluster and multi-reference configuration interaction type are used for evaluating individual increments. Results are given for the cohesive energy and lattice constants of beryllium, and it is shown that further development of the approach is needed for this difficult case

  15. Effects of beryllium-compounds on the hen. 2. Comm

    International Nuclear Information System (INIS)

    After oral application of 7Be2+ this cation is relative slowly absorbed from the intestine. The highest proportion of 7Be appeared in the feces. The absorbed 7Be has been found in the feathers, the bones and in the muscles as well as in the mucosa of the stomach and the intestine. Relative low is the accumulation in the liver and the kidneys as well as in the brain and the spinal cord. After i.v. application a high proportion of 7Be has been observed in the eggs. The rest of the applied radio-beryllium has been accumulated 7Be in the metabolically active tissues is removed very slowly. In contrast to this observation radio-beryllium disappeared relatively rapidly from the blood. (orig.)

  16. A charge-density study of crystalline beryllium

    International Nuclear Information System (INIS)

    The X-ray structure factors for crystalline beryllium measured by Brown [Phil. Mag. (1972), 26, 1377] have been analyzed with multipole deformation functions for charge-density information. Single exponential radial functions were used for the valence charge density. A valence monopole plus the three harmonics, P35(cos theta) sin 3phi, P6(cos theta) and P37(cos theta) sin 3phi, provide a least-squares fit to the data with Rsub(w)=0.0081. The superposition of these density functions describes a bonding charge density between Be atoms along the c axis through the tetrahedral vacancy. The results reported here are in qualitative agreement with a recent pseudo-potential calculation of metallic beryllium. The final residuals in the analysis are largest at high sin theta/lambda values. This suggests that core charge deformation is present and/or anharmonic motion of the nuclei is appreciable. (Auth.)

  17. Fabrication methods for beryllium spacecraft components (Series 2)

    International Nuclear Information System (INIS)

    The aims of this paper are to conserve and yet promote the use of one of the most versatile metal elements available to the practising engineer. The scope of the work described involves the selection of candidate components suitable for manufacture in beryllium. Evaluation by mathematical modelling using finite element techniques is used as an aid in determining the principal load paths in a structural component. Cost effective techniques which are objectively analysed suggest that the conservation of raw beryllia can best be achieved using recently developed plasma spray methods. The British Aircraft Corporation have been investigating methods of plasma spraying beryllium with A.W.R.E. and current developments are giving clear indications that for certain future space applications plasma spray is the technique which most nearly meets the conservation objective. (author)

  18. Fabrication of beryllium spheres and its validation tests

    International Nuclear Information System (INIS)

    A sphere-pack blanket concept using small size spheres of beryllium is one of the promising design concept of the ITER blanket, because the sphere-pack can accommodate the size deformation due to neutron irradiation damage, helium swelling and cyclic temperature changes. Preliminary R and D for an industrial fabrication technology of beryllium spheres (1.0 ± 0.3 mm in diameter) has been started as part of feasibility study of Japanese blanket concept of layered sphere-pack configuration. The following tests were performed in the several demo-fabrications; feasibility of size distribution control, material characterization such as macroscopic and microscopic structure analysis, impurity analysis, and attainable packing density, mechanical integrity under various thermal cycling conditions. (author)

  19. Low-energy electronic stopping for boron in beryllium

    International Nuclear Information System (INIS)

    The range distribution for 50-keV boron bombarding beryllium was measured by an energetic ion-beam backscattering technique using helium ions. This distribution was compared with the range calculated with computer code EDEP1, with the result k 0.101 ± 0.013 for the electronic-stopping k-value. This value is compared with the results of recent interpolations from measurements of other elements. (author)

  20. Thermal fatigue behavior of US and Russian grades of beryllium

    International Nuclear Information System (INIS)

    A novel technique has been used to test the relative low cycle thermal fatigue resistance of different grades of US and Russian beryllium which is proposed as plasma facing armor for fusion reactor first wall, limiter, and divertor components. The 30 KW electron beam test system at Sandia National Laboratories was used to sweep the beam spot along one direction at 1 Hz. This produces a localized temperature ''spike'' of 750 degrees C for each pass of the beam. Large thermal stress in excess of the yield strength are generated due to very high spot heat flux, 250 MW/m2. Cyclic plastic strains on the order of 0.6% produced visible cracking on the heated surface in less than 3000 cycles. An in-vacuo fiber optic borescope was used to visually inspect the beryllium surfaces for crack initiation. Grades of US beryllium tested included: S-65C, S-65H, S-200F, S-300F-H, Sr-200, I-400, extruded high purity. HIP'd sperical powder, porous beryllium (94% and 98% dense), Be/30% BeO, Be/60% BeO, and TiBe12. Russian grades included: TGP-56, TShGT, DShG-200, and TShG-56. Both the number of cycles to crack initiation, and the depth of crack propagation, were measured. The most fatigue resistant grades were S-65C, DShG-200, TShGT, and TShG-56. Rolled sheet Be(SR-200) showed excellent crack propagation resistance in the plane of rolling, despite early formation of delamination cracks. Only one sample showed no evidence of surface melting, Extruded (T). Metallographic and chemical analyses are provided. Good agreement was found between the measured depth of cracks and a 2-D elastic-plastic finite element stress analysis

  1. Analysis of features of the deformation of auxetic beryllium

    OpenAIRE

    Гунько, Михаил Николаевич; Олейнич-Лысюк, Алла Васильевна; Раранский, Николай Дмитриевич; Тащук, Александр Юрьевич

    2015-01-01

    In the framework of the linear elasticity theory using the experimentally obtained elastic stiffness modules, temperature dependences of the elastic compliance modules and tensor components of Poisson's ratios    of beryllium in a wide range of temperatures and directions in the crystal lattice were calculated, and it was shown that with increasing temperature, the value and signs of Poisson's ratios  change differently in various temperature intervals. In the interval 0-300K,  become negativ...

  2. Dose Rates from Plutonium Metal and Beryllium Metal in a 9975 Shipping Container

    International Nuclear Information System (INIS)

    A parametric study was performed of the radiation dose rates that might be produced if plutonium metal and beryllium metal were shipped in the 9975 shipping package. These materials consist of heterogeneous combinations plutonium metal and beryllium. The plutonium metal content varies up to 4.4 kilograms while the beryllium metal varies up to 4 kilograms. This paper presents the results of that study

  3. Elastic, micro- and macroplastic properties of polycrystalline beryllium

    Science.gov (United States)

    Kardashev, B. K.; Kupriyanov, I. B.

    2011-12-01

    The Young's modulus and the internal friction of beryllium polycrystals (size grain from 6 to 60 μm) prepared by the powder metallurgy method have been studied as functions of the amplitude and temperature in the range from 100 to 873 K. The measurements have been performed using the composite piezoelectric vibrator method for longitudinal vibrations at frequencies about 100 kHz. Based on the acoustic measurements, the data have been obtained on the elastic and inelastic (microplastic) properties as functions of vibration stress amplitudes within the limits from 0.2 to 30-60 MPa. The microplastic deformation diagram is shown to become nonlinear at the amplitudes higher than 5 MPa. The beryllium mechanical characteristics (the yield strength σ 0.2, the ultimate strength σ u , and the conventional microscopic yield strength σ y ) obtained with various grain sizes are compared. At room temperature, all the parameters satisfactorily obey the Hall-Petch relationship, although there is no complete similarity. The temperature dependences are quite different, namely: σ 0.2( T) and σ u ( T) decrease monotonically during heating from room temperature to higher temperatures; however, σ y ( T) behaves unusually, and it has a minimum near 400 K. The different levels of stresses and the absence of similarity indicate that the scattering of the ultrasound energy and the formation of a level of the macroscopic flow stresses in beryllium occur on dislocation motion obstacles of different origins.

  4. Beryllium Science: US-UK agreement on the use of Atomic Energy for mutual defense

    Energy Technology Data Exchange (ETDEWEB)

    Hanafee, J.E. (ed.)

    1988-02-19

    Twenty-seven papers are presented on beryllium supply, production, fabrication, safe handling, analysis, powder technology, and coatings. Separate abstracts have been prepared for the individual papers. (DLC)

  5. The impact of beryllium chloride and oxide on sexual function and offspring development in female rats

    International Nuclear Information System (INIS)

    The comparative study of the action of soluble chloride and difficultly soluble beryllium oxide on sexual cycle in female rats and their conception capability, revealing of embryotoxic and teratogenic effect of these compounds and determination of significance of terms of their impact on pregnant female as well as beryllium capability to penetrate through the placenta and accumulate in the offspring organism have been performed. A great potential danger of impact on animal reproductive function of soluble (chloride) beryllium compounds as compared with low soluble ones (oxide). In the genesis of embryotoxic teratonic effect probably along with beryllium impact on progeny through the maternal organism there occurs its direct impact on the offspring

  6. Vacuum Brazing of Beryllium Copper Components for the National Ignition Facility

    International Nuclear Information System (INIS)

    A process for vacuum brazing beryllium copper anode assemblies was required for the Plasma Electrode Pockels Cell System, or PEPC, a component for the National Ignition Facility (NIF). Initial problems with the joint design and wettability of the beryllium copper drove some minor design changes. Brazing was facilitated by plating the joint surface of the beryllium copper rod with silver 0.0006 inch thick. Individual air sampling during processing and swipe tests of the furnace interior after brazing revealed no traceable levels of beryllium

  7. Beryllium Science: US-UK agreement on the use of Atomic Energy for mutual defense

    International Nuclear Information System (INIS)

    Twenty-seven papers are presented on beryllium supply, production, fabrication, safe handling, analysis, powder technology, and coatings. Separate abstracts have been prepared for the individual papers

  8. Problems and future plan on material development of beryllium in materials testing reactors

    International Nuclear Information System (INIS)

    Beryllium has been utilized as a moderator and/or reflector in a number of material testing reactors. The attractive nuclear properties of beryllium are its low atomic number, low atomic weight, low parasitic capture cross section for thermal neutrons, readiness to part with one of its own neutrons, and good neutron elastic scattering characteristics. However, it is difficult to reprocess irradiated beryllium because of high induced radioactivity. Disposal has also been difficult because of toxicity issues and special nuclear material controls. In this paper, problems and future plans of beryllium technology are introduced for nuclear reactors. (author)

  9. Two-dimensional analysis of three-body reactions 11B(p,αα) from 163 keV to MeV

    International Nuclear Information System (INIS)

    An experimental apparatus for two-dimensions analysis of the break-up of 12C* produced by the reaction 11B(p,αα)4He, at proton bombarding energies between 163 keV and 2 MeV, is described. It uses Si surface barrier detectors and, fast-slow coincidence techniques: the energy resolution is about 40 keV and time resolution 6 ns. A 4096 channel analyser and a small digital computer was used for information storage and data processing. The experimental set-up was tested on the C.E.N.G. 2 MeV Van de Graaff accelerator. The spectra of the 12C* decay products taken at proton bombarding energies of 163 keV and 680 keV at different angles between the two α-counters are shown. They indicate strong evidence for sequential decay of 12C* to the 8Be fundamental, first or second excited level. (authors)

  10. Breakup branches of Borromean beryllium-9

    International Nuclear Information System (INIS)

    The breakup reaction 9Be(4He, 3α)n was measured using an array of four double-sided silicon strip detectors at beam energies of 22 and 26 MeV. Excited states in 9Be up to 12 MeV were populated and reconstructed through the measurement of the charged reaction products. It is proposed that limits on the spins and parities of the states can be derived from the way that they decay. Various breakup paths for excited states in 9Be have been explored including the 8Beg.s. + n, 8Be2+ + n and 5Heg.s. + 4He channels. By imposing the condition that the breakup proceeded via the 8Be ground state, clean excitation spectra for 9Be were reconstructed. The remaining two breakup channels were found to possess strongly-overlapping kinematic signatures and more sophisticated methods (referenced) are required to completely disentangle these other possibilities. Emphasis is placed on the development of the experimental analysis and the usefulness of Monte-Carlo simulations for this purpose

  11. Breakup branches of Borromean beryllium-9

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R., E-mail: r.smith.3@pgr.bham.ac.uk; Freer, M.; Wheldon, C.; Curtis, N.; Ashwood, N. I.; Barr, M.; Kokalova, Tz.; Malcolm, J. D.; Ziman, V. A. [School of Physics and Astronomy, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Almaraz-Calderon, S.; Aprahamian, A.; Bucher, B.; Couder, M.; Fang, X.; Jung, F.; Lu, W.; Roberts, A.; Tan, W. P. [Institute for Structure and Nuclear Astrophysics, Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States); Copp, P.; Lesher, S. R. [Department of Physics, University of Wisconsin - La Crosse, La Crosse, WI 54601 (United States); and others

    2015-10-15

    The breakup reaction {sup 9}Be({sup 4}He, 3α)n was measured using an array of four double-sided silicon strip detectors at beam energies of 22 and 26 MeV. Excited states in {sup 9}Be up to 12 MeV were populated and reconstructed through the measurement of the charged reaction products. It is proposed that limits on the spins and parities of the states can be derived from the way that they decay. Various breakup paths for excited states in {sup 9}Be have been explored including the {sup 8}Be{sub g.s.} + n, {sup 8}Be{sub 2{sup +}} + n and {sup 5}He{sub g.s.} + {sup 4}He channels. By imposing the condition that the breakup proceeded via the {sup 8}Be ground state, clean excitation spectra for {sup 9}Be were reconstructed. The remaining two breakup channels were found to possess strongly-overlapping kinematic signatures and more sophisticated methods (referenced) are required to completely disentangle these other possibilities. Emphasis is placed on the development of the experimental analysis and the usefulness of Monte-Carlo simulations for this purpose.

  12. Thermal decomposition of beryllium perchlorate tetrahydrate

    International Nuclear Information System (INIS)

    Thermal decomposition of Be(ClO4)2x4H2O was studied by the differential flow technique in the helium stream. The kinetics was followed by an exchange reaction of the perchloric acid appearing by the decomposition with potassium carbonate. The rate of CO2 liberation in this process was recorded by a heat conductivity detector. The exchange reaction yielding CO2 is quantitative, it is not the limiting one and it does not distort the kinetics of the process of perchlorate decomposition. The solid products of decomposition were studied by infrared and NMR spectroscopy, roentgenography, thermography and chemical analysis. A mechanism suggested for the decomposition involves intermediate formation of hydroxyperchlorate: Be(ClO4)2x4H2O → Be(OH)ClO4+HClO4+3H2O; Be(OH)ClO4 → BeO+HClO4. Decomposition is accompained by melting of the sample. The mechanism of decomposition is hydrolytic. At room temperature the hydroxyperchlorate is a thick syrup-like compound crystallizing after long storing

  13. Breakup branches of Borromean beryllium-9

    Science.gov (United States)

    Smith, R.; Freer, M.; Wheldon, C.; Curtis, N.; Almaraz-Calderon, S.; Aprahamian, A.; Ashwood, N. I.; Barr, M.; Bucher, B.; Copp, P.; Couder, M.; Fang, X.; Goldring, G.; Jung, F.; Kokalova, Tz.; Lesher, S. R.; Lu, W.; Malcolm, J. D.; Roberts, A.; Tan, W. P.; Ziman, V. A.

    2015-10-01

    The breakup reaction 9Be(4He, 3α)n was measured using an array of four double-sided silicon strip detectors at beam energies of 22 and 26 MeV. Excited states in 9Be up to 12 MeV were populated and reconstructed through the measurement of the charged reaction products. It is proposed that limits on the spins and parities of the states can be derived from the way that they decay. Various breakup paths for excited states in 9Be have been explored including the 8Beg.s. + n, 8Be2+ + n and 5Heg.s. + 4He channels. By imposing the condition that the breakup proceeded via the 8Be ground state, clean excitation spectra for 9Be were reconstructed. The remaining two breakup channels were found to possess strongly-overlapping kinematic signatures and more sophisticated methods (referenced) are required to completely disentangle these other possibilities. Emphasis is placed on the development of the experimental analysis and the usefulness of Monte-Carlo simulations for this purpose.

  14. Chemokine regulation in response to beryllium exposure in human peripheral blood mononuclear and dendritic cells

    International Nuclear Information System (INIS)

    Exposure to beryllium (Be) induces a delayed-type hypersensitivity immune reaction in the lungs of susceptible individuals, which leads to the onset of Be sensitivity and Chronic Beryllium Disease (CBD). Although some mechanistic aspects of CBD have begun to be characterized, very little is known about the molecular mechanisms by which Be activates the host immune response. To gain insight into the cellular response to Be exposure, we have performed global microarray analysis using a mixture of peripheral blood mononuclear and dendritic cells (PBMC/DCs) from a non-CBD source to identify genes that are specifically upregulated in response to BeSO4 stimulation, compared to a control metal salt, Al2(SO4)3. We identified a number of upregulated immunomodulatory genes, including several chemokines in the MIP-1 and GRO families. Using PBMC/DCs from three different donors, we demonstrate that BeSO4 stimulation generally exhibits an increased rate of both chemokine mRNA transcription and release compared to Al2(SO4)3 exposure, although variations among the individual donors do exist. We show that MIP-1α and MIP-1β neutralizing antibodies can partially inhibit the ability of BeSO4 to stimulate cell migration of PBMC/DCs in vitro. Finally, incubation of PBMC/DCs with BeSO4 altered the binding of the transcription factor RUNX to the MIP-1α promoter consensus sequence, indicating that Be can regulate chemokine gene activation. Taken together, these results suggest a model in which Be stimulation of PBMC/DCs can modulate the expression and release of different chemokines, leading to the migration of lymphocytes to the lung and the formation of a localized environment for development of Be disease in susceptible individuals

  15. Beryllium Project: developing in CDTN of uranium dioxide fuel pellets with addition of beryllium oxide to increase the thermal conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ricardo Alberto Neto; Camarano, Denise das Merces; Miranda, Odair; Grossi, Pablo Andrade; Andrade, Antonio Santos; Queiroz, Carolinne Mol; Gonzaga, Mariana de Carvalho Leal, E-mail: ranf@cdtn.br, E-mail: dmc@cdtn.br, E-mail: odairm@cdtn.br, E-mail: pabloag@cdtn.br, E-mail: antdrade@gmail.com, E-mail: carolmol@gmail.com, E-mail: mari_clgonzaga@hotmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Pampulha, MG (Brazil)

    2013-07-01

    Although the nuclear fuel currently based on pellets of uranium dioxide be very safe and stable, the biggest problem is that this material is not a good conductor of heat. This results in an elevated temperature gradient between the center and its lateral surface, which leads to a premature degradation of the fuel, which restricts the performance of the reactor, being necessary to change the fuel before its full utilization. An increase of only 5 to 10 percent in its thermal conductivity, would be a significant increase. An increase of 50 percent would be a great improvement. A project entitled 'Beryllium Project' was developed in CDTN - Centro de Desenvolvimento da Tecnologia Nuclear, which aimed to develop fuel pellets made from a mixture of uranium dioxide microspheres and beryllium oxide powder to obtain a better heat conductor phase, filling the voids between the microspheres to increase the thermal conductivity of the pellet. Increases in the thermal conductivity in the range of 8.6% to 125%, depending on the level of addition employed in the range of 1% to 14% by weight of beryllium oxide, were obtained. This type of fuel promises to be safer than current fuels, improving the performance of the reactor, in addition to last longer, resulting in great savings. (author)

  16. Immunological characterisation of groups of people exposed to beryllium as a result of burning coal with high contents of this toxin

    International Nuclear Information System (INIS)

    An epidemological study was made of persons occupationally (39) and non-occupationally (34) exposed to relatively low concentrations of beryllium in air as a result of coal combustion. Beryllium concentrations in the workplace were between 30 and 800x10-5 mg.m-3, and in the town of Sokolov 1.68-0.39x10-5 mg.m-3. Radial immunodiffusion was used to determine main immunoglobulin classes, and the passive haemagglutination reaction used to determine antibodies (lungs, heart, liver, spleen, thyroid) and antibodies to nuclear (ANA) and mitochondrial (AMA) antigens in intact rat lungs and rats with experimental berylliosis. In both exposed groups significant increase in IgG and IgA and autoantibodies was found compared with controls (60). Specific AMA and ANA were found in exposed groups (higher values in women). (UK)

  17. Spectroscopic investigation and computational analysis of charge transfer hydrogen bonded reaction between 3-aminoquinoline with chloranilic acid in 1:1 stoichiometric ratio

    Science.gov (United States)

    Al-Ahmary, Khairia M.; Alenezi, Maha S.; Habeeb, Moustafa M.

    2015-10-01

    Charge transfer hydrogen bonded reaction between the electron donor (proton acceptor) 3-aminoquinoline with the electron acceptor (proton donor) chloranilic acid (H2CA) has been investigated experimentally and theoretically. The experimental work included the application of UV-vis spectroscopy to identify the charge transfer band of the formed complex, its molecular composition as well as estimating its formation constants in different solvent included acetonitrile (AN), methanol (MeOH), ethanol (EtOH) and chloroform (CHL). It has been recorded the presence of new absorption bands in the range 500-550 nm attributing to the formed complex. The molecular composition of the HBCT complex was found to be 1:1 (donor:acceptor) in all studied solvents based on continuous variation and photometric titration methods. In addition, the calculated formation constants from Benesi-Hildebrand equation recorded high values, especially in chloroform referring to the formation of stable HBCT complex. Infrared spectroscopy has been applied for the solid complex where formation of charge and proton transfer was proven in it. Moreover, 1H and 13C NMR spectroscopies were used to characterize the formed complex where charge and proton transfers were reconfirmed. Computational analysis included the use of GAMESS computations as a package of ChemBio3D Ultr12 program were applied for energy minimization and estimation of the stabilization energy for the produced complex. Also, geometrical parameters (bond lengths and bond angles) of the formed HBCT complex were computed and analyzed. Furthermore, Mullikan atomic charges, molecular potential energy surface, HOMO and LUMO molecular orbitals as well as assignment of the electronic spectra of the formed complex were presented. A full agreement between experimental and computational analysis has been found especially in the existence of the charge and proton transfers and the assignment of HOMO and LUMO molecular orbitals in the formed complex as

  18. Sequential mechanism for the Li7 (He3, α)6 Li(d)α reaction at incident energy between 2.5 and 11.5 MeV

    International Nuclear Information System (INIS)

    A strictly sequential mechanism appears to appropriate for the Li7 (3He,α)6Li(d)α reaction in the energy range between 2.5 and 11.5 MeV. It can be described by a first direct emission mechanism and a second delayed emission

  19. Proceedings of the third IEA international workshop on beryllium technology for fusion

    International Nuclear Information System (INIS)

    This report is the Proceedings of the Third International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on October 22-24, 1997, at the Sangyou Kaikan in Mito City with 68 participants who attended from the Europe, the Russian Federation, the Kazakstan, the United States and Japan. The topics for papers were arranged into 9 sessions; beryllium applications for ITER, production and characterization, chemical compatibility and corrosion, forming and joining, plasma/tritium interactions, beryllium coating, first wall applications, neutron irradiation effects, health and safety. To utilize beryllium in the pebble type blanket, a series of discussions were intensified in multiple view points such as the swelling, He/T release from beryllium pebble irradiated up to high He content, effective thermal conductivity, tritium permeation and coating, and fabrication cost, and so on. As the plasma facing material, life time of beryllium and coated beryllium, dust and particle production, joining, waste treatment, mechanical properties and deformation by swelling were discussed as important issues. Especially, it was recognized throughout the discussions that the comparative study by the different researchers should be carried out to establish the reliability of the data reported in the workshop and in others. To enhance the comparative study, the world wide collaboration for the relative evaluation of the beryllium was proposed by the International Organization Committee and the proposal was approved by all of the participants. The 45 of the presented papers are indexed individually. (J.P.N.)

  20. Theoretical Chemistry to assess the risk from the Beryllium in ITER

    International Nuclear Information System (INIS)

    The Bestair project was recently awarded the IRSN prize for creativity in exploratory research. The objective of this study was to assess the potential release of beryllium, an extremely toxic element, into the environment in the event of an accident through improved knowledge of the beryllium-based chemical forms present inside the ITER containment. (author)

  1. Tritium release from highly neutron irradiated constrained and unconstrained beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Chakin, V., E-mail: vladimir.chakin@kit.edu; Rolli, R.; Vladimirov, P.; Moeslang, A.

    2015-06-15

    Highlights: • For the irradiated constrained beryllium pebbles, the tritium release occurs easier than for the unconstrained ones. • Tritium retention in the irradiated constrained and unconstrained beryllium pebbles decreases with increasing irradiation temperature. • Formation of sub-grains in the constrained beryllium pebbles facilitate the open porosity network formation. - Abstract: Beryllium is the reference neutron multiplier material in the Helium Cooled Pebble Bed (HCPB) breeding blanket of fusion power plants. Significant tritium inventory accumulated in beryllium as a result of neutron-induced transmutations could become a safety issue for the operation of such blankets as well as for the nuclear waste utilization. To provide a related materials database, a neutron irradiation campaign of beryllium pebbles with diameters of 0.5 and 1 mm at 686–1006 K, the HIDOBE-01 experiment, has been performed in the HFR in Petten, the Netherlands, producing up to 3020 appm helium and 298 appm tritium. Thermal desorption tests of irradiated unconstrained and constrained beryllium pebbles were performed in a purge gas flow using a quadrupole mass-spectrometer (QMS) and an ionization chamber. Compared to unconstrained pebbles, constrained beryllium pebbles have an enhanced tritium release at all temperatures investigated. Small elongated sub-grains formed under irradiation in the constrained pebbles promote formation of numerous channels for facilitated tritium release.

  2. Reduction evaporation of BeO to provide a beryllium metal sample for accelerator radiometric dating

    International Nuclear Information System (INIS)

    A technique is described for preparing beryllium metal samples from beryllium oxide for use in accelerator ion sources. These samples are used to measure minute 10Be/9Be ratios for radiometric dating at the University of Washington tandem Van de Graaff accelerator. (orig.)

  3. Proceedings of the third IEA international workshop on beryllium technology for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, Hiroshi; Okamoto, Makoto [eds.

    1998-01-01

    This report is the Proceedings of the Third International Energy Agency International Workshop on Beryllium Technology for Fusion. The workshop was held on October 22-24, 1997, at the Sangyou Kaikan in Mito City with 68 participants who attended from the Europe, the Russian Federation, the Kazakstan, the United States and Japan. The topics for papers were arranged into 9 sessions; beryllium applications for ITER, production and characterization, chemical compatibility and corrosion, forming and joining, plasma/tritium interactions, beryllium coating, first wall applications, neutron irradiation effects, health and safety. To utilize beryllium in the pebble type blanket, a series of discussions were intensified in multiple view points such as the swelling, He/T release from beryllium pebble irradiated up to high He content, effective thermal conductivity, tritium permeation and coating, and fabrication cost, and so on. As the plasma facing material, life time of beryllium and coated beryllium, dust and particle production, joining, waste treatment, mechanical properties and deformation by swelling were discussed as important issues. Especially, it was recognized throughout the discussions that the comparative study by the different researchers should be carried out to establish the reliability of the data reported in the workshop and in others. To enhance the comparative study, the world wide collaboration for the relative evaluation of the beryllium was proposed by the International Organization Committee and the proposal was approved by all of the participants. The 45 of the presented papers are indexed individually. (J.P.N.)

  4. Tritium release from highly neutron irradiated constrained and unconstrained beryllium pebbles

    International Nuclear Information System (INIS)

    Highlights: • For the irradiated constrained beryllium pebbles, the tritium release occurs easier than for the unconstrained ones. • Tritium retention in the irradiated constrained and unconstrained beryllium pebbles decreases with increasing irradiation temperature. • Formation of sub-grains in the constrained beryllium pebbles facilitate the open porosity network formation. - Abstract: Beryllium is the reference neutron multiplier material in the Helium Cooled Pebble Bed (HCPB) breeding blanket of fusion power plants. Significant tritium inventory accumulated in beryllium as a result of neutron-induced transmutations could become a safety issue for the operation of such blankets as well as for the nuclear waste utilization. To provide a related materials database, a neutron irradiation campaign of beryllium pebbles with diameters of 0.5 and 1 mm at 686–1006 K, the HIDOBE-01 experiment, has been performed in the HFR in Petten, the Netherlands, producing up to 3020 appm helium and 298 appm tritium. Thermal desorption tests of irradiated unconstrained and constrained beryllium pebbles were performed in a purge gas flow using a quadrupole mass-spectrometer (QMS) and an ionization chamber. Compared to unconstrained pebbles, constrained beryllium pebbles have an enhanced tritium release at all temperatures investigated. Small elongated sub-grains formed under irradiation in the constrained pebbles promote formation of numerous channels for facilitated tritium release

  5. Protection of beryllium metal against microbial influenced corrosion using silane self-assembled monolayers

    Science.gov (United States)

    Vaidya, Rajendra U.; Deshpande, Alina; Hersman, Larry; Brozik, Susan M.; Butt, Darryl

    1999-08-01

    The effectiveness of a self-assembled silane monolayer as protection for beryllium against microbiologically influenced corrosion (MIC) was demonstrated. Four-point bend tests on coated and uncoated beryllium samples were conducted after microbiological exposures, and the effectiveness of these coatings as MIC protection was reported through mechanical property evaluations. Application of the silane monolayer to the beryllium surfaces was found to prevent degradation of the failure strength and displacement-to-failure of beryllium in bending. In contrast, the uncoated beryllium samples exhibited a severe reduction in these mechanical properties in the presence of the marine Pseudomonas bacteria. The potentiodynamic measurements showed that both the uncoated and coated samples pitted at the open-circuit potential. However, the size and distribution of the corrosion pits formed on the surface of the beryllium samples were significantly different for the various cases (coated vs uncoated samples exposed to control vs inoculated medium). This study demonstrates the following: (1) the deleterious effects of MIC on the mechanical properties of beryllium and (2) the potential for developing fast, easy, and cost-effective MIC protection for beryllium metal using silane self-assemblies.

  6. Reduction of surface erosion caused by helium blistering in sintered beryllium and sintered aluminum powder

    International Nuclear Information System (INIS)

    Studies have been conducted to find materials with microstructures which minimize the formation of blisters. A promising class of materials appears to be sintered metal powder with small average grain sizes and low atomic number Z. Studies of the surface erosion of sintered aluminum powder (SAP 895) and of aluminum held at 4000C due to blistering by 100 keV helium ions have been conducted and the results are compared to those obtained earlier for room temperature irradiation. A significant reduction of the erosion rate in SAP 895 in comparison to annealed aluminum and SAP 930 is observed. In addition results on the blistering of sintered beryllium powder (type I) irradiated at room temperature and 6000C by 100 keV helium ions are given. These results will be compared with those reported recently for vacuum cast beryllium foil and a foil of sintered beryllium powder (type II) which was fabricated differently, than type I. For room temperature irradiation only a few blisters could be observed in sintered beryllium powder type I and type II and they are smaller in size and in number than in vacuum cast beryllium. For irradiation at 6000C large scale exfoliation of blisters was observed for vacuum cast beryllium but much less exfoliation was seen for sintered beryllium powder, type I, and type II. The results show a reduction in erosion rate cast beryllium, for both room temperature and 6000C

  7. Contribution to the study of (d,p) and (d,α> reactions on 16O and 11B from 200 keV to 1 MeV

    International Nuclear Information System (INIS)

    The reactions 16O(d,α0), (d,p0), (d,p1) and 11B(d,α0), (d,α2), (d,p0) have been studied from 200 keV to 1 MeV. The interpretation of (d,α) reactions by the compound nucleus theory has shown the presence of 18F levels (7,94 MeV, 1+; 8,09 MeV, 1+ ) and of 13C level (19 MeV, 3/2± or 5/2-). The interpretation of 16O(d,p1) and 11B(d,p0) reactions at energies lower than 400 keV has been given by a theory of Coulomb stripping. (author)

  8. 20 CFR 30.207 - How does a claimant prove a diagnosis of a beryllium disease covered under Part B?

    Science.gov (United States)

    2010-04-01

    ... this section), together with lung pathology consistent with chronic beryllium disease, including the...) Occupational or environmental history, or epidemiologic evidence of beryllium exposure; and (ii) Any three of...) Lung pathology consistent with chronic beryllium disease. (D) Clinical course consistent with a...

  9. Preliminary irradiation test for new material selection on lifetime extension of beryllium reflector

    International Nuclear Information System (INIS)

    Beryllium has been utilized as a moderator and/or reflector in Japan Materials Testing Reactor (JMTR), because of nuclear properties of beryllium, low neutron capture and high neutron scattering cross sections. At present, the amount of irradiated beryllium frames in JMTR is about 2 tons in the JMTR canal. In this study, preliminary irradiation test was performed from 162nd to 165th operation cycles of JMTR as irradiation and PIE technique development for lifetime expansion of beryllium frames. The design study of irradiation capsule, development of dismount device of irradiation capsule and the high accuracy size measurement device were carried out. The PIEs such as tensile tests, metallurgical observation, and size change measurement were carried out with two kinds of irradiated beryllium metals (S-200F and S-65C)

  10. Preliminary irradiation test for new material selection on lifetime extension of beryllium reflector

    International Nuclear Information System (INIS)

    Beryllium has been utilized as a moderator and/or reflector in Japan Materials Testing Reactor (JMTR), because of nuclear properties of beryllium, low neutron capture and high neutron scattering cross sections. At present, the amount of irradiated beryllium frames in JMTR is about 2 tons in the JMTR canal. In this study, preliminary irradiation test was performed from 162nd to 165th operation cycles of JMTR as irradiation and PIE technique development for lifetime expansion of beryllium frames. The design study of irradiation capsule, development of dismount device of irradiation capsule and the high accuracy size measurement device were carried out. The PIEs such as tensile tests, metallurgical observation, and size change measurement were also carried out with two kinds of irradiated beryllium metals (S-200F and S-65C). (author)

  11. Relationship between Reaction Time, Fine Motor Control, and Visual-Spatial Perception on Vigilance and Visual-Motor Tasks in 22q11.2 Deletion Syndrome

    Science.gov (United States)

    Howley, Sarah A.; Prasad, Sarah E.; Pender, Niall P.; Murphy, Kieran C.

    2012-01-01

    22q11.2 Deletion Syndrome (22q11DS) is a common microdeletion disorder associated with mild to moderate intellectual disability and specific neurocognitive deficits, particularly in visual-motor and attentional abilities. Currently there is evidence that the visual-motor profile of 22q11DS is not entirely mediated by intellectual disability and…

  12. Use of notched beams to establish fracture criteria for beryllium

    International Nuclear Information System (INIS)

    The fracture of an improved form of pure beryllium was studied under triaxial tensile stresses. This state of stress was produced by testing notched beams, which were thick enough to be in a state of plane strain at the center. A plane strain, elastic-incremental plasticity finite element program was then used to determine the stress and strain distributions at fracture. A four-point bend fixture was used to load the specimens. It was carefully designed and manufactured to eliminate virtually all of the shear stresses at the reduced section of the notched beams. The unixial properties were obtained

  13. Accumulation of tritium in beryllium material under neutron irradiation

    International Nuclear Information System (INIS)

    In the present work the programming code is created on the basis of which the accumulation kinetics of tritium and isotope of He4 in the Be9 sample is analyzed depending on the time. The program is written in C++ programming language and for the calculations Monte Carlo method was applied. This program scoped on the calculation of concentration of helium and tritium in beryllium samples depending on the spectrum of the neutron flux in different experimental reactors such as JMTR, JOYO and IPEN/MB. The processes of accumulation of helium and tritium for each neutron energy spectrum of these reactors were analyzed. (author)

  14. Atomic, Crystal, Elastic, Thermal, Nuclear, and Other Properties of Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, A

    2006-02-01

    This report is part of a series of documents that provide a background to those involved in the construction of beryllium components and their applications. This report is divided into five sub-sections: Atomic/Crystal Structure, Elastic Properties, Thermal Properties, Nuclear Properties, and Miscellaneous Properties. In searching through different sources for the various properties to be included in this report, inconsistencies were at times observed between these sources. In such cases, the values reported by the Handbook of Chemistry and Physics was usually used. In equations, except where indicated otherwise, temperature (T) is in degrees Kelvin.

  15. Double K-shell photoionization of atomic beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Yip, F. L. [Departamento de Quimica, Modulo 13, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Martin, F. [Departamento de Quimica, Modulo 13, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Instituto Madrilen(tilde sign)o de Estudios Avanzados en Nanociencia, Cantoblanco, E-28049 Madrid (Spain); McCurdy, C. W. [Department of Chemistry, University of California, Davis, California 95616 (United States); Lawrence Berkeley National Laboratory, Chemical Sciences, and Ultrafast X-ray Science Laboratory, Berkeley, California 94720 (United States); Rescigno, T. N. [Lawrence Berkeley National Laboratory, Chemical Sciences, and Ultrafast X-ray Science Laboratory, Berkeley, California 94720 (United States)

    2011-11-15

    Double photoionization of the core 1s electrons in atomic beryllium is theoretically studied using a hybrid approach that combines orbital and grid-based representations of the Hamiltonian. The {sup 1} S ground state and {sup 1} P final state contain a double occupancy of the 2s valence shell in all configurations used to represent the correlated wave function. Triply differential cross sections are evaluated, with particular attention focused on a comparison of the effects of scattering the ejected electrons through the spherically symmetric valence shell with similar cross sections for helium, representing a purely two-electron target with an analogous initial-state configuration.

  16. Portable Beryllium Prospecting Instrument With Large Sensitive Area

    International Nuclear Information System (INIS)

    The instrument described was designed on the basis of the photoneutron method of determining beryllium in rock surfaces and developed with a view to prospecting beryllium minerals in the Ilímaussaq intrusion, south Greenland. These minerals occur,mainly in hydrothermal veins which are from 1 mm to about 2 m wide. Of the ten beryllium minerals found until now, chkalovite (12% BeO) is the most common. The distinctive feature of the prospecting instrument is a comparatively large effective measuring area (∼500 cm2). Since the instrument is intended for use in a difficult terrain without roads, it has been necessary to limit its weight and size as much as possible. The instrument consists of a detector unit and a control unit. The detector unit has the dimensions 46 x 21 x 10 cm, weighs 20 kg, and contains a 30 cm long gamma-activation device, a biological radiation shield, and two 30-cm long 3He-filled neutron proportional detectors embedded in paraffin wax. The gamma- activation device consists of 31 identical 12Sb-sources placed in a steel tube with spacings decreasing towards the ends of the tube and with a total activity of 20 mCi. During transport of the instrument the gamma-activation device is placed at the centre of the radiation shield, when the maximum dose-rate on the surface of the detector unit is 200 mR/h. When the instrument is in use, the activation device is turned to a position just above the bottom of the detector unit. The sensitivity per cm2 of the bottom surface to a 5-cm thick layer of beryllium is 20% of its value at the centre of the bottom surface along a curve which is roughly an ellipse with axes 34 and 18 cm The total sensitivity of the instrument is about 35 counts/min per % BeO per mCi 124Sb, and the background count-rate is 12-20 counts/mm. The corresponding theoretical detection limit for a single measurement of 8-min duration is 35-50 ppm BeO. (author)

  17. Microstructure and mechanical properties of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Ishitsuka, E.; Kawamura, H. [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Terai, T.; Tanaka, S.

    1998-01-01

    Microstructure and mechanical properties of the neutron irradiated beryllium with total fast neutron fluences of 1.3 - 4.3 x 10{sup 21} n/cm{sup 2} (E>1 MeV) at 327 - 616degC were studied. Swelling increased by high irradiation temperature, high fluence, and by the small grain size and high impurity. Obvious decreasing of the fracture stress was observed in the bending test and in small grain specimens which had many helium bubbles on the grain boundary. Decreasing of the fracture stress for small grain specimens was presumably caused by crack propagation on the grain boundaries which weekend by helium bubbles. (author)

  18. Dosage of boron traces in graphite, uranium and beryllium oxide

    International Nuclear Information System (INIS)

    The problem of the dosage of the boron in the materials serving to the construction of nuclear reactors arises of the following way: to determine to about 0,1 ppm close to the quantities of boron of the order of tenth ppm. We have chosen the colorimetric analysis with curcumin as method of dosage. To reach the indicated contents, it is necessary to do a previous separation of the boron and the materials of basis, either by extraction of tetraphenylarsonium fluoborate in the case of the boron dosage in uranium and the beryllium oxide, either by the use of a cations exchanger resin of in the case of graphite. (M.B.)

  19. Tritium analyses of COBRA-1A2 beryllium pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, D.L. [Pacific Northwest National Lab., Richland, WA (United States)

    1998-03-01

    Selected tritium measurements have been completed for the COBRA-1A2 experiment C03 and D03 beryllium pebbles. The completed results, shown in Tables 1, 2, and 3, include the tritium assay results for the 1-mm and 3-mm C03 pebbles, and the 1-mm D03 pebbles, stepped anneal test results for both types of 1-mm pebbles, and the residual analyses for the stepped-anneal specimens. All results have been reported with date-of-count and are not corrected for decay. Stepped-anneal tritium release response is provided in addenda.

  20. Physicochemical characteristics of aerosol particles generated during the milling of beryllium silicate ores: implications for risk assessment.

    Science.gov (United States)

    Stefaniak, Aleksandr B; Chipera, Steve J; Day, Gregory A; Sabey, Phil; Dickerson, Robert M; Sbarra, Deborah C; Duling, Mathew G; Lawrence, Robert B; Stanton, Marcia L; Scripsick, Ronald C

    2008-01-01

    Inhalation of beryllium dusts generated during milling of ores and cutting of beryl-containing gemstones is associated with development of beryllium sensitization and low prevalence of chronic beryllium disease (CBD). Inhalation of beryllium aerosols generated during primary beryllium production and machining of the metal, alloys, and ceramics are associated with sensitization and high rates of CBD, despite similar airborne beryllium mass concentrations among these industries. Understanding the physicochemical properties of exposure aerosols may help to understand the differential immunopathologic mechanisms of sensitization and CBD and lead to more biologically relevant exposure standards. Properties of aerosols generated during the industrial milling of bertrandite and beryl ores were evaluated. Airborne beryllium mass concentrations among work areas ranged from 0.001 microg/m(3) (beryl ore grinding) to 2.1 microg/m(3) (beryl ore crushing). Respirable mass fractions of airborne beryllium-containing particles were 80% in high-energy input areas (beryl melting, beryl grinding). Particle specific surface area decreased with processing from feedstock ores to drumming final product beryllium hydroxide. Among work areas, beryllium was identified in three crystalline forms: beryl, poorly crystalline beryllium oxide, and beryllium hydroxide. In comparison to aerosols generated by high-CBD risk primary production processes, aerosol particles encountered during milling had similar mass concentrations, generally lower number concentrations and surface area, and contained no identifiable highly crystalline beryllium oxide. One possible explanation for the apparent low prevalence of CBD among workers exposed to beryllium mineral dusts may be that characteristics of the exposure material do not contribute to the development of lung burdens sufficient for progression from sensitization to CBD. In comparison to high-CBD risk exposures where the chemical nature of aerosol

  1. Effect of copper on crack propagation in beryllium single crystals

    International Nuclear Information System (INIS)

    The effect of copper additives on the fracture energy and the development of cracks parallel to the basal plane was studied in zone-refined single crystalline beryllium. At 770K the cleavage planes are very smooth, so the crack propagation energy, which is independent of copper content (less than 2 at. percent Cu) in the range of measurement accuracy, is only a little higher than the surface energy of the basal plane. At room temperature, due to intense plastic processes taking place in front of the crack tip, the fracture energy is an order of magnitude higher than at low temperatures. The effect of copper on the plastic processes can be divided into two regions. In region I (less than 1.2 at. percent Cu), in which the crack propagation energy increases sharply with increasing copper content, crack propagation is controlled by prism slips. The decrease in crack propagation energy in region II (greater than 1.2 at. percent Cu) can be attributed to a reduction of beryllium twinning energy with increasing copper content. (auth)

  2. A non-chemical spectroscopic determination of atmospheric beryllium

    International Nuclear Information System (INIS)

    Beryllium in the atmosphere is determined by emission spectroscopy using a non-chemical method of analysis. Long term effects of beryllium poisoning result in respiratory and skin disease, and this is partly reflected by the low threshold limits (0.002 mg/m3). In comparison the threshhold values for lead and cadmium are 0.2 and 0.16 mg/m3 respectively. Air samples are collected at 2 litres/ minute using cellulose filters, and sampling time is dependent on the individual process being monitored, but can be as short as five minutes, eg. dental laboratories. The filters are initially divided in two parts, and one portion is carefully pelletised using a steel press. The pellet is placed in an electrode cup and 'wetted' using isopropanol and ethylene glycol. Wetting is necessary because the pellets tended to explode out of the arcing zone. Calibration graphs were produced using an internal cobalt standard, and the 234.8 nm, 313.0 nm emission lines were used. No spectral and inter-element effects were observed, and the minimum detection limit was one nanogram. Under normal working conditions a 25% precision was obtained. (author)

  3. Calculations for electron-impact excitation and ionization of beryllium

    CERN Document Server

    Zatsarinny, Oleg; Fursa, Dmitry V; Bray, Igor

    2016-01-01

    The B-spline R-matrix and the convergent close-coupling methods are used to study electron collisions with neutral beryllium over an energy range from threshold to 100 eV. Coupling to the target continuum significantly affects the results for transitions from the ground state, but to a lesser extent the strong transitions between excited states. Cross sections are presented for selected transitions between low-lying physical bound states of beryllium, as well as for elastic scattering, momentum transfer, and ionization. The present cross sections for transitions from the ground state from the two methods are in excellent agreement with each other, and also with other available results based on nonperturbative convergent pseudo-state and time-dependent close-coupling models. The elastic cross section at low energies is dominated by a prominent shape resonance. The ionization from the $(2s2p)^3P$ and $(2s2p)^1P$ states strongly depends on the respective term. The current predictions represent an extensive set o...

  4. Influence of neutron irradiation on the tritium retention in beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Rolli, R.; Ruebel, S.; Werle, H. [Forschungszentrum Karlsruhe, Inst. fuer Neutronenphysik und Reaktortechnik, Karlsruhe (Germany); Wu, C.H.

    1998-01-01

    Carbon-based materials and beryllium are the candidates for protective layers on the components of fusion reactors facing plasma. In contact with D-T plasma, these materials absorb tritium, and it is anticipated that tritium retention increases with the neutron damage due to neutron-induced traps. Because of the poor data base for beryllium, the work was concentrated on it. Tritium was loaded into the samples from stagnant T{sub 2}/H{sub 2} atmosphere, and afterwards, the quantity of the loaded tritium was determined by purged thermal annealing. The specification of the samples is shown. The samples were analyzed by SEM before and after irradiation. The loading and the annealing equipments are contained in two different glove boxes with N{sub 2} inert atmosphere. The methods of loading and annealing are explained. The separation of neutron-produced and loaded tritium and the determination of loaded tritium in irradiated samples are reported. Also the determination of loaded tritium in unirradiated samples is reported. It is evident that irradiated samples contained much more loaded tritium than unirradiated samples. The main results of this investigation are summarized in the table. (K.I.)

  5. Remarkable Hydrogen Storage on Beryllium Oxide Clusters: First Principles Calculations

    CERN Document Server

    Shinde, Ravindra

    2016-01-01

    Since the current transportation sector is the largest consumer of oil, and subsequently responsible for major air pollutants, it is inevitable to use alternative renewable sources of energies for vehicular applications. The hydrogen energy seems to be a promising candidate. To explore the possibility of achieving a solid-state high-capacity storage of hydrogen for onboard applications, we have performed first principles density functional theoretical calculations of hydrogen storage properties of beryllium oxide clusters (BeO)$_{n}$ (n=2 -- 8). We observed that polar BeO bond is responsible for H$_{2}$ adsorption. The problem of cohesion of beryllium atoms does not arise, as they are an integral part of BeO clusters. The (BeO)$_{n}$ (n=2 -- 8) adsorbs 8--12 H$_{2}$ molecules with an adsorption energy in the desirable range of reversible hydrogen storage. The gravimetric density of H$_{2}$ adsorbed on BeO clusters meets the ultimate 7.5 wt% limit, recommended for onboard practical applications. In conclusion,...

  6. Condensation reaction of 3-[(8Z)-8-pentadecenyl]phenol and 3-[(8Z,11Z)-8,11,14-pentadecatrienyl]phenol with several indoles and their application to whitening effects utility; 3-[(8Z)-8-pentadecenyl] phenol oyobi 3-[(8Z,11Z)-8,11,14-pentadecatrienyl] phenol to sushu no indole kagobutsu tono shukugo hanno narabini bihaku koka

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, M.; Sakakiyama, T.; Fujihara, Y. [Kinki University, Osaka (Japan). Faculty of Engineering; Tada, T.; Shimomura, K.; Iida, K.; Yamabe, Y. [Mikimoto Pharmaceutical and Co. Ltd., Mie (Japan)

    1997-08-20

    This paper reports on compounds and their whitening effects as derived from condensation reactions between two kinds of cardanols separated from oil in cashew nut shells made in Indonesia (1): 3-[(8 Z)-8- pentadecenyl] phenol and (2): 3-[(8 Z, 11Z)-8, 11, 14-pentadecatrienyl] phenol and seven kinds of indole compounds. Tyrosinase activity inhibition test, activated oxygen suppression effect test and hyaluronidase activity inhibition test were performed to discuss the effectiveness of these 14 kinds of cardanol derivatives as whitening pharmaceuticals. High hyaluronidase activity inhibition and good tyrosinase activity inhibition were recognized on three kinds of compounds synthesized from the (1) and 5-methoxyindole-2-carbonic acid, 5-hydroxyindole-3-acietic acid and 5-methoxy-2-methyl-3-indole acetic acid. 13 refs., 1 fig., 2 tabs.

  7. Tritium migration in the materials proposed for fusion reactors: Li{sub 2}TiO{sub 3} and beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Kulsartov, T.V., E-mail: kulsartov@nnc.kz [Institute of Atomic Energy NNC RK, 071100, Krasnoarmeiskay St., 10, Kurchatov (Kazakhstan); Gordienko, Yu.N.; Tazhibayeva, I.L. [Institute of Atomic Energy NNC RK, 071100, Krasnoarmeiskay St., 10, Kurchatov (Kazakhstan); Kenzhin, E.A. [Shakarim Semey State University, 071412, Glinka St., 20b, Semey (Kazakhstan); Barsukov, N.I.; Sadvakasova, A.O. [Institute of Atomic Energy NNC RK, 071100, Krasnoarmeiskay St., 10, Kurchatov (Kazakhstan); Kulsartova, A.V. [Nuclear Technology Safety Center, 050020, L. Chaikina 4, Almaty (Kazakhstan); Zaurbekova, Zh.A. [Institute of Atomic Energy NNC RK, 071100, Krasnoarmeiskay St., 10, Kurchatov (Kazakhstan)

    2013-11-15

    The results of tritium and helium gas release from lithium ceramics samples Li{sub 2}TiO{sub 3} irradiated at the WWR-K reactor (Almaty, Kazakhstan) and from beryllium samples irradiated at the BN-350 reactor (Aktau, Kazakhstan) and the IVG.1M reactor (Kurchatov, Kazakhstan) are presented. Experimentally obtained thermal desorption (TDS) spectra have shown that the dependence of tritium release from lithium ceramics has a complicated behavior and to a large extent depends on lithium ceramics type. Nevertheless, it was found that the total amount of tritium released from all types of lithium ceramics has the same order of magnitude, equal to about 10{sup 11} Bq/kg. It was found that in the temperature range from 523 K to 1373 K the process of tritium release from lithium ceramics involves volume diffusion and thermoactivated tritium release from the accumulation centers generated under irradiation. TDS of beryllium samples enables us to obtain characteristics of tritium and helium release during linear heating, to determine integrated quantities of generated helium and tritium, and to determine parameters of release processes.

  8. Reduction of surface erosion caused by helium blistering: comparison between vacuum-cast and sintered-beryllium

    International Nuclear Information System (INIS)

    The blister formation and the erosion associated with blistering in a vacuum cast beryllium foil and in a foil of sintered beryllium powder have been investigated for irradiation at room temperature and at 6000C with 100 keV 4He+ ions for total doses of 0.5 to 1.0 C cm-2. For room temperature irradiation the blisters in sintered beryllium powder are smaller in size than in vacuum cast beryllium. For irradiation at 6000C large scale exfoliation of blisters was observed for vacuum cast beryllium but only small amount of exfoliation was seen for sintered beryllium powder. The results show a reduction in erosion rate in sintered beryllium as compared to the erosion rate in vacuum cast beryllium. For room temperature irradiation no erosion rate could be determined for the sintered beryllium foil since no blister exfoliation was observed. For 6000C irradiation the erosion rate for sintered beryllium foil is more than an order of magnitude smaller than for vacuum cast beryllium

  9. Immobilisation of beryllium in solid waste (red-mud) by fixation and vitrification.

    Science.gov (United States)

    Bhat, P N; Ghosh, D K; Desai, M V M

    2002-01-01

    The objective of this study was to obtain information on the immobilization of beryllium (Be) in solid waste generated in the extraction process of beryllium from its ore, Beryl. This solid waste, termed red-mud, contains oxides of iron, aluminium, calcium, magnesium and beryllium. The red-mud waste contains beryllium at levels above the permissible limit, which prevents its disposal as solid waste. The total beryllium content in the red-mud analysed showed value ranging from 0.39 to 0.59% Be The studies showed that 50% of the total beryllium in red-mud can be extracted by water by repeated leaching over a period of 45 days. The cement mix, casting into cement blocks, was subjected to leachability studies over a period of 105 days and immobilization factor (IF factor) was determined. These IF values, of the order of 102, were compared with those obtained by performing leachability study on vitrified red-mud masses produced at different temperature conditions. Direct heating of the red-mud gave the gray coloured, non-transparent vitreous mass (as 'bad glass') showed effective immobilisation factor for beryllium in red-mud of the order of 10(4). PMID:12092765

  10. New and Emerging Technologies for Real-Time Air and Surface Beryllium Monitoring; FINAL

    International Nuclear Information System (INIS)

    In this study, five emerging technologies were identified for real-time monitoring of airborne beryllium: Microwave-Induced Plasma Spectroscopy (MIPS), Aerosol Beam-Focused Laser-Induced Plasma Spectroscopy (ABFLIPS), Laser-Induced Breakdown Spectroscopy (LIBS), Surfaced-Enhanced Raman Scattering (SERS) Spectroscopy, and Micro-Calorimetric Spectroscopy (CalSpec). Desired features of real-time air beryllium monitoring instrumentation were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies as well as their unique demonstrated capability to provide real-time monitoring of similar materials. However, best available technologies were considered, regardless of their ability to comply with the desired features. None of the five technologies have the capability to measure the particle size of airborne beryllium. Although reducing the total concentration of airborne beryllium is important, current literature suggests that reducing or eliminating the concentration of respirable beryllium is critical for worker health protection. Eight emerging technologies were identified for surface monitoring of beryllium. CalSpec, MIPS, SERS, LIBS, Laser Ablation, Absorptive Stripping Voltametry (ASV), Modified Inductively Coupled Plasma (ICP) Spectroscopy, and Gamma BeAST. Desired features of real-time surface beryllium monitoring were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies. However, the best available technologies were considered regardless of their ability to comply with the desired features

  11. Development of radiation resistant grades of beryllium for nuclear and fusion facilities

    Energy Technology Data Exchange (ETDEWEB)

    Kupriyanov, I.B.; Gorokhov, V.A.; Nikolaev, G.N. [Russia Research Institute of Inorganic Materials, Moscow (Russian Federation)

    1995-09-01

    R&D results on beryllium with high radiation resistance obtained recently are described in this report. The data are presented on nine different grades of isotropic beryllium manufactured by VNIINM and distinguished by both initial powder characteristics and properties of billets, made of these powders. The average grain size of the investigated beryllium grades varied from 8 to 26 {mu}m, the content of beryllium oxide was 0.9 - 3.9 wt.%, the dispersity of beryllium oxide - 0.04 - 0.5 {mu}m, tensile strength -- 250 - 650 MPa. All materials were irradiated in SM - 2 reactor over the temperature range 550 - 780{degrees}C. The results of the investigation showed, that HIP beryllium grades are less susceptible to swelling at higher temperatures in comparison with hot pressed and extruded grades. Beryllium samples, having the smallest grain size, demonstrated minimal swelling, which was less than 0.8 % at 750{degrees}C and Fs = 3.7 {center_dot}10{sup 21} cm{sup -2} (E>0.1 MeV). The mechanical properties, creep and microstructure parameters, measured before and after irradiation, are presented.

  12. New and Emerging Technologies for Real-Time Air and Surface Beryllium Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Phifer, B.E. Jr.; Churnetski, E.L.; Cooke, L.E.; Reed, J.J.; Howell, M.L.; Smith, V.D.

    2001-09-01

    In this study, five emerging technologies were identified for real-time monitoring of airborne beryllium: Microwave-Induced Plasma Spectroscopy (MIPS), Aerosol Beam-Focused Laser-Induced Plasma Spectroscopy (ABFLIPS), Laser-Induced Breakdown Spectroscopy (LIBS), Surfaced-Enhanced Raman Scattering (SERS) Spectroscopy, and Micro-Calorimetric Spectroscopy (CalSpec). Desired features of real-time air beryllium monitoring instrumentation were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies as well as their unique demonstrated capability to provide real-time monitoring of similar materials. However, best available technologies were considered, regardless of their ability to comply with the desired features. None of the five technologies have the capability to measure the particle size of airborne beryllium. Although reducing the total concentration of airborne beryllium is important, current literature suggests that reducing or eliminating the concentration of respirable beryllium is critical for worker health protection. Eight emerging technologies were identified for surface monitoring of beryllium. CalSpec, MIPS, SERS, LIBS, Laser Ablation, Absorptive Stripping Voltametry (ASV), Modified Inductively Coupled Plasma (ICP) Spectroscopy, and Gamma BeAST. Desired features of real-time surface beryllium monitoring were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies. However, the best available technologies were considered regardless of their ability to comply with the desired features.

  13. The development and advantages of beryllium capsules for the National Ignition Facility

    International Nuclear Information System (INIS)

    Capsules with beryllium ablators have long been considered as alternatives to plastic for the National Ignition Facility laser; now the superior performance of beryllium is becoming well substantiated. Beryllium capsules have the advantages of relative insensitivity to instability growth, low opacity, high tensile strength, and high thermal conductivity. 3-D calculation with the HYDRA code NTIS Document No. DE-96004569 (M. M. Marinak et.al. in UCRL-LR-105821-95-3) confirm 2-D LASNEX U. B. Zimmerman and W. L. Kruer, Comments Plasmas Phys. Controlled Thermonucl. Fusion, 2, 51(2975) results that particular beryllium capsule designs are several times less sensitive than the CH point design to instability growth from DT ice roughness. These capsule designs contain more ablator mass and leave some beryllium unablated at ignition. By adjusting the level of copper dopant, the unablated mass can increase or decrease, with a corresponding decrease or increase in sensitivity to perturbations. A plastic capsule with the same ablator mass as the beryllium and leaving the same unablated mass also shows this reduced perturbation sensitivity. Beryllium's low opacity permits the creation of 250 eV capsule designs. Its high tensile strength allows it to contain DT fuel at room temperature. Its high thermal conductivity simplifies cryogenic fielding

  14. Mechanical compression tests of beryllium pebbles after neutron irradiation up to 3000 appm helium production

    Energy Technology Data Exchange (ETDEWEB)

    Chakin, V., E-mail: vladimir.chakin@kit.edu [Karlsruhe Institute of Technology, Institite for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Rolli, R.; Moeslang, A. [Karlsruhe Institute of Technology, Institite for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Zmitko, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, c/Josep Pla, no. 2, Torres Diagonal Litoral, Edificio B3, 08019 Barcelona (Spain)

    2015-04-15

    Highlights: • Compression tests of highly neutron irradiated beryllium pebbles have been performed. • Irradiation hardening of beryllium pebbles decreases the steady-state strain-rates. • The steady-state strain-rates of irradiated beryllium pebbles exceed their swelling rates. - Abstract: Results: of mechanical compression tests of irradiated and non-irradiated beryllium pebbles with diameters of 1 and 2 mm are presented. The neutron irradiation was performed in the HFR in Petten, The Netherlands at 686–968 K up to 1890–2950 appm helium production. The irradiation at 686 and 753 K cause irradiation hardening due to the gas bubble formation in beryllium. The irradiation-induced hardening leads to decrease of steady-state strain-rates of irradiated beryllium pebbles compared to non-irradiated ones. In contrary, after irradiation at higher temperatures of 861 and 968 K, the steady-state strain-rates of the pebbles increase because annealing of irradiation defects and softening of the material take place. It was shown that the steady-state strain-rates of irradiated beryllium pebbles always exceed their swelling rates.

  15. The HFR Petten high dose irradiation programme of beryllium for blanket application

    International Nuclear Information System (INIS)

    This paper reports the objectives of a high dose irradiation of beryllium in the High Flux Reactor in Petten. In addition, the nuclear parameters, irradiation parameters and the provisional test-matrix, i.e. Beryllium grades and pebbles is presented. The irradiation will be performed in the frame of the European Programme for the development of the Helium Cooled Pebble Bed (HCPB) to study the irradiation behaviour of Beryllium. Part of the materials will be provided by Japanese and Russian partners, for which cooperation through IEA agreements is being put into place. (author)

  16. Loading beryllium targets to extend the high flux isotope reactor's cycle length

    International Nuclear Information System (INIS)

    Various arrangements of beryllium loadings to create an internal neutron reflector in the flux trap region of the Oak Ridge National Laboratory's High Flux Isotope Reactor (HFIR) have been investigated. In particular, the impact upon fuel cycle length has been studied by performing calculations using the HFIR MCNP-based model HFV4.0. This study included examining perturbations in reactivity, flux, and power distribution caused by the various beryllium loadings. The HFIR Cycle 400 core configuration was used as a reference to calculate the impact of beryllium loadings upon cycle length. Three different configurations of beryllium loadings were investigated and compared against the Cycle 400 benchmark calculations; Cases 1 through 3 modeled combinations of 12 and 18 beryllium rods loaded into unused experimental sites. Calculated eigenvalues have shown that potential increases in reactivity between 0.56 and 0.79 dollars are attainable, depending on the various beryllium configurations. These results correspond to possible increases in fuel cycle length ranging between 2.3% and 3.3%. On the basis of their practicality, cost versus benefit, and greater potential for implementation, Cases 2 and 3 (both with 18 beryllium rods) were studied further and are herein reported in greater detail. Neutron flux distributions for Cases 2 and 3 were calculated at the horizontal mid-plane of the flux trap region, which showed no significant changes in the thermal flux magnitude and radial profile in comparison to Cycle 400. Likewise, safety analysis related parameters were contrasted, revealing power increments of up to 2% near the inside edge of the inner fuel element, well below the maximum acceptable value of 9%, a standing guideline employed for experiments at the HFIR. Additionally, the average neutron heat generation rate in beryllium rods and the maximum heat generation rate were evaluated to confirm that the design provides adequate coolant flow inside the rod and around the

  17. Conditions for preparation of ultrapure beryllium by electrolytic refining in molten alkali-metal chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Wohlfarth, Hagen

    1982-02-01

    Electrolytic refining is regarded as the most suitable process for the production of beryllium with impurity contents below 1 at.-ppM. Several parameters are important for electrolytic refining of beryllium in a BeCl/sub 2/-containing LiCl-KCl melt: current density, BeCl/sub 2/ content, electrolyte temperature, composition of the unpurified beryllium and impurity-ion concentrations in the melt, as well as apparatus characteristics such as rotation speed of the cathode and condition of the crucible material. These factors were studied and optimized such that extensive removal of the maximum number of accompanying and alloying elements was achieved.

  18. Study of beryllium redeposition under bombardment by high intensity -low energy- hydrogen ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Gureev, V.M.; Guseva, M.I.; Danelyan, L.S. [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation)] [and others

    1998-01-01

    The results of studying the erosion of beryllium under an effect of intense ion fluxes with the energy of 250 eV, at the fluences {approx}10{sup 2}1 cm{sup -2}, at the MAGRAS-stand are given. The operating conditions under which a practically-complete redeposition of the sputtered beryllium upon the target surface were experimentally-realized. A change in the microstructure of a beryllium target under sputtering and redeposition is analyzed. Some technological applications are considered. (author)

  19. Feasibility of organo-beryllium target mandrels using organo-germanium PECVD as a surrogate

    International Nuclear Information System (INIS)

    Inertial Confinement Fusion capsules incorporating beryllium are becoming attractive for use in implosion experiments designed for modest energy gain. This paper explores the feasibility of chemical vapor deposition of organo-beryllium precursors to form coating materials of interest as ablators and fuel containers. Experiments were performed in a surrogate chemical system utilizing tetramethylgermane as the organometallic precursor. Coatings with up to 60 mole percent germanium were obtained. These coatings compare favorably with those previously reported in the literature and provide increasing confidence that a similar deposition process with an organo-beryllium precursor would be successful

  20. Failure prediction of thin beryllium sheets used in spacecraft structures

    Science.gov (United States)

    Roschke, Paul N.; Mascorro, Edward; Papados, Photios; Serna, Oscar R.

    1991-01-01

    The primary objective of this study is to develop a method for prediction of failure of thin beryllium sheets that undergo complex states of stress. Major components of the research include experimental evaluation of strength parameters for cross-rolled beryllium sheet, application of the Tsai-Wu failure criterion to plate bending problems, development of a high order failure criterion, application of the new criterion to a variety of structures, and incorporation of both failure criteria into a finite element code. A Tsai-Wu failure model for SR-200 sheet material is developed from available tensile data, experiments carried out by NASA on two circular plates, and compression and off-axis experiments performed in this study. The failure surface obtained from the resulting criterion forms an ellipsoid. By supplementing experimental data used in the the two-dimensional criterion and modifying previously suggested failure criteria, a multi-dimensional failure surface is proposed for thin beryllium structures. The new criterion for orthotropic material is represented by a failure surface in six-dimensional stress space. In order to determine coefficients of the governing equation, a number of uniaxial, biaxial, and triaxial experiments are required. Details of these experiments and a complementary ultrasonic investigation are described in detail. Finally, validity of the criterion and newly determined mechanical properties is established through experiments on structures composed of SR200 sheet material. These experiments include a plate-plug arrangement under a complex state of stress and a series of plates with an out-of-plane central point load. Both criteria have been incorporated into a general purpose finite element analysis code. Numerical simulation incrementally applied loads to a structural component that is being designed and checks each nodal point in the model for exceedance of a failure criterion. If stresses at all locations do not exceed the failure

  1. Chemical interactions of beryllium with lithium-based oxides and stainless steel

    International Nuclear Information System (INIS)

    The chemical compatibility of Be with Li2SiO3, Li4SiO4 and stainless steel (AISI 316) was investigated in the temperature range between 600 and 900degC with maximum annealing times of 1000 h. Beryllium is of interest as a neutron multiplier material in a fusion reactor. First chemical interactions in the Be/Li2SiO3 and Be/Li4SiO4 systems occur at 650degC. The compatibility of Be with Li2SiO3 seems to be sufficient up to 650degC, whereas that with Li4SiO4 is sufficient even up to 700degC. At higher temperatures the silicide reaction products LixSiy become liquid which results in a strong local attack and penetration into the lithium silicates. Be interacts with stainless steel locally already at 600degC. The compatibility behavior in the Be/Li-silicate/stainless steel system under isothermal conditions is therefore determined by the Be/steel interactions. (orig.)

  2. Thermal desorption analysis of beryllium tile pieces from JET

    International Nuclear Information System (INIS)

    Pieces of beryllium tile exposed to a D-D plasma in JET have been studied by thermal desorption spectroscopy. These tiles have a thick layer of redeposited Be-C-O with considerable hydrogen and deuterium present. The samples were heated at a constant rate of 2 C/min. from 100 C to 900 C. Desorption peaks occurred in the range of 140-480 C. There was no significant desorption at temperatures above 600 C. The amount of deuterium detected varied from a low of 8 x 1021/m2 to a high of 2.1 x 1023/m2. In one case, the amount of deuterium in a tile piece was seven times greater than the amount in a neighboring tile piece. Some of the tile pieces in the plasma-exposed region showed surface melting. Despite this, the deuterium yield from one of these pices is >1023/m2. (orig.)

  3. Thermal Induced Processes in Laminar System of Stainless Steel - Beryllium

    International Nuclear Information System (INIS)

    The paper reports on investigation of the laminar system 'stainless steel 12Cr18Ni10Ti - Be' at thermal treatment. There have been determined sequences of phase transformations along with relative amount of iron-containing phases in the samples subjected to thermal beryllization. It has been revealed that thermal beryllization of stainless steel thin foils results in γ→α transformation and formation of the beryllides NiBe and FeBe2. It has also been revealed that direct γ→α- and reverse α→γ-transformations are accompanied by, correspondingly, formation and decomposition of the beryllide NiBe. It is shown that distribution of the formed phases within sample bulk is defined by local concentration of beryllium. Based on obtained experimental data there is proposed a physical model of phase transformations in stainless steel at thermal beryllization.

  4. Modelling of radiation impact on ITER Beryllium wall

    International Nuclear Information System (INIS)

    In the ITER H-Mode confinement regime, edge localized instabilities (ELMs) will perturb the discharge. Plasma lost after each ELM moves along magnetic field lines and impacts on divertor armour, causing plasma contamination by back propagating eroded carbon or tungsten. These impurities produce enhanced radiation flux distributed mainly over the beryllium main chamber wall. The simulation of the complicated processes involved are subject of the integrated tokamak code TOKES that is currently under development. This work describes the new TOKES model for radiation transport through confined plasma. Equations for level populations of the multi-fluid plasma species and the propagation of different kinds of radiation (resonance, recombination and bremsstrahlung photons) are implemented. First simulation results without account of resonance lines are presented.

  5. Preparation of nuclear purity beryllium oxalate tri-hydrate

    International Nuclear Information System (INIS)

    In this report we have gathered the whole of the knowledge acquired by our group during the campaign for preparation of beryllium oxalate we carried out through the first half year of 1962. The reader shall find in the first place information and bibliographic data gathered by Miss OLLIVIER, documentalist of the Section d'Etudes, Recherches et Applications Chimiques. We then describe the original process perfected in the laboratories, and the production techniques we employed for the semi-large operative units. Finally, we publish the results we obtained on one hand on the chemical aspect, in the industrial meaning of the term, which is to-day concerning the ponderal output, on the other hand on the analytical aspect as you can evidently not dissociate the quantity of substance produced from its purity. (authors)

  6. Stress distribution and fracture behavior of beryllium compact tension specimens

    International Nuclear Information System (INIS)

    Compact tension specimens of beryllium (Be) were designed to study fracture behavior and mechanical properties. The local stress distribution near a notch in a compact tension specimen was measured in situ by the combination of an X-ray stress analysis and a custom-designed load device. The fracture morphology was observed by scanning electron microscopy. The result showed that the local stresses near the notch tip are much higher than in other areas, and cracking occurs first in that area. The load-crack opening displacement curve of the Be compact tension specimen was obtained, and used to calculate the fracture toughness as 15.7 MPa√m. The compact tension specimen fracture surfaces were mainly characterized by cleavage fracture over three different areas. Cleavage micro-cracks along the basal slip plane were formed at the crack tip, and their growth was controlled by the primary stress after reaching a critical length

  7. Spectrophotometric determination of beryllium in bronzes with chrome azurol S

    International Nuclear Information System (INIS)

    Some remarks on the spectrophotometric determination of beryllium in bronzes using Chrome Azurol S (CAS) are given. The determination was performed at pH=6.5 and 10.0 using hexamethylene-tetramine and ammoniacal buffers, respectively. It was demonstrated that the determination of Be with CAS at pH=10.0 is slightly less sensitive, but it has two advantages which are important in obtaining reliable results. First, is the shorter time to reach the equilibrium between Be and CAS, and second, is lower pH sensitivity so that a better precision of the results at pH=10.0 overcompensate the slightly lower sensitivity at this pH in comparison with that at pH=6.5. (Author)

  8. Fracture testing of beryllium copper alloy C17510

    International Nuclear Information System (INIS)

    Beryllium copper alloy C17510 has been selected as the primary candidate material for the Burning Plasma Experiment (BPX) toroidal field coil conductors, Since the coils will be subjected to both mechanical and thermal load cycling during their design life, it becomes imperative to be able to predict the fatigue crack propagation characteristics of this essential structural system. While C17510 is well defined in terms of conventional static properties (e.g., yield, modulus, elongation), virtually no data existed for its plane-strain fracture toughness and fatigue crack growth rate constants, which are required if an accurate life prediction of the coils is to be made using linear elastic fracture mechanics (LEFM). This paper will discuss the test program, in particular, fracture toughness and fatigue crack propagation testing, and their respective results

  9. Tensile and fracture toughness test results of neutron irradiated beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Chaouadi, R.; Moons, F.; Puzzolante, J.L. [Centre d`Etude de l`Energie Nucleaire, Mol (Belgium)

    1998-01-01

    Tensile and fracture toughness test results of four Beryllium grades are reported here. The flow and fracture properties are investigated by using small size tensile and round compact tension specimens. Irradiation was performed at the BR2 material testing reactor which allows various temperature and irradiation conditions. The fast neutron fluence (>1 MeV) ranges between 0.65 and 2.45 10{sup 21} n/cm{sup 2}. In the meantime, un-irradiated specimens were aged at the irradiation temperatures to separate if any the effect of temperature from irradiation damage. Test results are analyzed and discussed, in particular in terms of the effects of material grade, test temperature, thermal ageing and neutron irradiation. (author)

  10. Violence of heavy-ion reactions from neutron multiplicity: 11 to 20A MeV /sup 20/Ne+ /sup 238/U

    International Nuclear Information System (INIS)

    The suitability of the neutron multiplicity as a gauge for the violence of medium-energy heavy-ion reactions is investigated for the first time. For this purpose the number of neutrons emitted from fission reactions induced by 220-, 290-, and 400-MeV /sup 20/Ne on /sup 238/U is registered event-by-event with a large 4π scintillator tank. It is shown that the neutron multiplicity is indeed closely related to the two quantities characterizing the violence: the induced total intrinsic excitation and the linear momentum transfer

  11. Methanol to hydrocarbons reaction over HZSM-22 and SAPO-11:Effect of catalyst acid strength on reaction and deactivation mechanism%HZSM-22和SAPO-11催化甲醇转化制烯烃(MTH)反应:酸强度对反应和失活机理的影响

    Institute of Scientific and Technical Information of China (English)

    王金棒; 张雯娜; 武新强; 郭新闻; 刘中民; 李金哲; 徐舒涛; 郅玉春; 魏迎旭; 何艳丽; 陈景润; 张默之; 王全义

    2015-01-01

      12C/13C-甲醇切换实验表明, HZSM-22和SAPO-11催化的甲醇转化机理主要是烯烃循环,然而由于酸强度的差异导致两种分子筛上甲基化反应和裂解反应对烯烃最终产物分布贡献不同。对于HZSM-22分子筛,催化活性较高,当反应温度低于400 oC时,产物以C5+高碳烃为主,随着反应温度的升高,产物以C2–C4低碳烃为主,且乙烯的增长速率高于丙烯;对于SAPO-11分子筛,催化活性较低,无论反应温度高或低,甲醇转化产物均以C5+高碳烃为主。以上结果表明,催化剂的活性与酸强度相关,且随着反应温度的升高,在酸性较强的HZSM-22分子筛上高碳烃的裂解活性要远高于酸性较弱的SAPO-11分子筛。该推论得到13C-甲醇和12C-1-丁烯共进料实验数据的支持。失活催化剂的GC-MS和TG结果显示,催化剂的失活与酸强度和反应温度密切相关:对于HZSM-22分子筛,较低温度下(450 oC)的失活是源于分子筛表面石墨碳的沉积;对于SAPO-11分子筛,低温下(400 oC)的失活是源于分子筛表面石墨碳的沉积。此外,由于酸强度的差异,与SAPO-11相比,低温下积碳物种更倾向于在HZSM-22分子筛孔口快速形成。这也是HZSM-22分子筛在低温下快速失活的原因。为了进一步证明该结论,本文采用原位红外装置对HZSM-22催化甲醇转化过程中的Brönsted酸和芳烃物种进行了连续监测。结果显示,在最初的15 min内归属为Brönsted酸的峰(3585 cm–1)有明显的下降,但随着反应时间的延长, Brönsted酸的量不再发生变化;与此同时,归属为芳烃物种的峰(3136 cm–1)增加到一定程度后随着反应时间的延长也几乎不再增加。这进一步说明了低温下HZSM-22分子筛的失活是由非活性芳烃积碳物种堵塞孔口造成的。%The conversion of methanol to hydrocarbons has been investigated over HZSM-22 and SAPO-11. Both of these catalysts possess one-dimensional 10

  12. Cost effective aluminum beryllium mirrors for critical optics applications

    Science.gov (United States)

    Say, Carissa; Duich, Jack; Huskamp, Chris; White, Ray

    2013-09-01

    The unique performance of aluminum-beryllium frequently makes it an ideal material for manufacturing precision optical-grade metal mirrors. Traditional methods of manufacture utilize hot-pressed powder block in billet form which is subsequently machined to final dimensions. Complex component geometries such as lightweighted, non-plano mirrors require extensive tool path programming, fixturing, and CNC machining time and result in a high buy-to-fly ratio (the ratio of the mass of raw material purchased to the mass of the finished part). This increases the cost of the mirror structure as a significant percentage of the procurement cost is consumed in the form of machining, tooling, and scrap material that do not add value to the final part. Inrad Optics, Inc. and IBC Advanced Alloys Corp. undertook a joint study to evaluate the suitability of investment-cast Beralcast® 191 and 363 aluminum-beryllium as a precision mirror substrate material. Net shape investment castings of the desired geometry minimizes machining to just cleanup stock, thereby reducing the recurring procurement cost while still maintaining performance. The thermal stability of two mirrors, (one each of Beralcast® 191 and Beralcast® 363), was characterized from -40°F to +150°F. A representative pocketed mirror was developed, including the creation of a relevant geometry and production of a cast component to validate the approach. Information from the demonstration unit was used as a basis for a comparative cost study of the representative mirror produced in Beralcast® and one machined from a billet of AlBeMet® 162 (AlBeMet® is a registered trademark of Materion Corporation). The technical and financial results of these studies will be discussed in detail.

  13. Assessment of beryllium Faraday screens of the JET ICRF antennas

    International Nuclear Information System (INIS)

    The JET ICRF antennas, equipped with beryllium (Be) Faraday screens (FS), can be operated in such a way that the RF specific effects on the plasma boundary, by the impurity influx originating at the screens, are reduced to a negligible level. In dipole phasing, k parallel = 7 m-1, the influx is for all purposes negligible. In monopole phasing (kparallel = 0 m-1) the beryllium influx does not exceed ΦFSBe = 1 x 1019 atoms·MW-1·s-1 and the corresponding δZeff/PRF is -1. The observed dependences of ΦFSBe (in monopole phasing) on plasma density, antenna voltage, antenna phasing, and the angle between FS elements and the magnetic field in the boundary, B-vector(a) = B-vectorθ(a) + B-vectorT(a), confirm that the release mechanism is sputtering by ions accelerated in the RF enhanced Bohm-Debye sheaths forming at the front face of the FS. When the angle between FS and B-vector(a) is approx. 22 deg. C, the fraction of the RF power radiated by the antenna, dissipated at the screen, can reach 40%. At high antenna voltage, arcing across the FS can occur. With dipole phasing the heating efficiency is not degraded, even with the large angle, and all the power coupled by the antenna is absorbed at the resonance position near the plasma centre. The open screen design did not introduce any disadvantages. The experience from JET operation at powers of up to 22 MW shows that, if the necessary conditions are met, i.e. if RF rectification is minimized, antennas are phased as dipoles and material with low sputtering coefficients at energies of 0.5-1 keV is used, then the influx from the FS is, for all practical purposes, eliminated. (author). 19 refs, 6 figs

  14. First beryllium capsule implosions on the National Ignition Facility

    Science.gov (United States)

    Kline, J. L.; Yi, S. A.; Simakov, A. N.; Olson, R. E.; Wilson, D. C.; Kyrala, G. A.; Perry, T. S.; Batha, S. H.; Zylstra, A. B.; Dewald, E. L.; Tommasini, R.; Ralph, J. E.; Strozzi, D. J.; MacPhee, A. G.; Callahan, D. A.; Hinkel, D. E.; Hurricane, O. A.; Milovich, J. L.; Rygg, J. R.; Khan, S. F.; Haan, S. W.; Celliers, P. M.; Clark, D. S.; Hammel, B. A.; Kozioziemski, B.; Schneider, M. B.; Marinak, M. M.; Rinderknecht, H. G.; Robey, H. F.; Salmonson, J. D.; Patel, P. K.; Ma, T.; Edwards, M. J.; Stadermann, M.; Baxamusa, S.; Alford, C.; Wang, M.; Nikroo, A.; Rice, N.; Hoover, D.; Youngblood, K. P.; Xu, H.; Huang, H.; Sio, H.

    2016-05-01

    The first indirect drive implosion experiments using Beryllium (Be) capsules at the National Ignition Facility confirm the superior ablation properties and elucidate possible Be-ablator issues such as hohlraum filling by ablator material. Since the 1990s, Be has been the preferred Inertial Confinement Fusion (ICF) ablator because of its higher mass ablation rate compared to that of carbon-based ablators. This enables ICF target designs with higher implosion velocities at lower radiation temperatures and improved hydrodynamic stability through greater ablative stabilization. Recent experiments to demonstrate the viability of Be ablator target designs measured the backscattered laser energy, capsule implosion velocity, core implosion shape from self-emission, and in-flight capsule shape from backlit imaging. The laser backscatter is similar to that from comparable plastic (CH) targets under the same hohlraum conditions. Implosion velocity measurements from backlit streaked radiography show that laser energy coupling to the hohlraum wall is comparable to plastic ablators. The measured implosion shape indicates no significant reduction of laser energy from the inner laser cone beams reaching the hohlraum wall as compared with plastic and high-density carbon ablators. These results indicate that the high mass ablation rate for beryllium capsules does not significantly alter hohlraum energetics. In addition, these data, together with data for low fill-density hohlraum performance, indicate that laser power multipliers, required to reconcile simulations with experimental observations, are likely due to our limited understanding of the hohlraum rather than the capsule physics since similar multipliers are needed for both Be and CH capsules as seen in experiments.

  15. Modes of Occurrence and Geological Origin of Beryllium in Coals from the Pu'an Coalfield, Guizhou, Southwest China

    Institute of Scientific and Technical Information of China (English)

    YANG Jianye

    2007-01-01

    The concentration, modes of occurrence and geological origin of beryllium in five workable coal beds from the Pu'an Coalfield of Guizbou were studied using the inductively coupled-plasma mass spectrometry (ICP-MS), floating and sinking experiments (FSE) and sequential chemical extraction procedures (SCEP). The results show that the average concentration of beryllium in coals from the Pu'an Coalfield is 1.54 μg/g, much lower than that in most Chinese and worldwide coals.Beryllium in the Pu'an coals was not significantly enriched. However, it should be noted that the No. 8 coal bed from the study area has a high concentration of beryllium, 6.89 μg/g, three times higher than the background value of beryllium in coal. Beryllium in coal mainly occurs as organic association and has predominantly originated from coal-forming plants when its concentration is relatively low. The concentration of beryllium occurring as organic association is close to that distributed in inorganic matter when beryllium concentration of coal is similar to its background value, and in addition to coal-forming plants, beryllium is mainly derived from detrital materials of terrigenous origin. When beryllium is anomalously enriched in coal, it mainly occurs as organic association and is derived from volcanic tonsteins leached for a long geological time and then adsorbed by organic matter in peat mire.

  16. Analysis of beryllium and depleted uranium: An overview of detection methods in aerosols and soils

    International Nuclear Information System (INIS)

    We conducted a survey of commercially available methods for analysis of beryllium and depleted uranium in aerosols and soils to find a reliable, cost-effective, and sufficiently precise method for researchers involved in environmental testing at the Yuma Proving Ground, Yuma, Arizona. Criteria used for evaluation include cost, method of analysis, specificity, sensitivity, reproducibility, applicability, and commercial availability. We found that atomic absorption spectrometry with graphite furnace meets these criteria for testing samples for beryllium. We found that this method can also be used to test samples for depleted uranium. However, atomic absorption with graphite furnace is not as sensitive a measurement method for depleted uranium as it is for beryllium, so we recommend that quality control of depleted uranium analysis be maintained by testing 10 of every 1000 samples by neutron activation analysis. We also evaluated 45 companies and institutions that provide analyses of beryllium and depleted uranium. 5 refs., 1 tab

  17. Analysis of beryllium and depleted uranium: An overview of detection methods in aerosols and soils

    Energy Technology Data Exchange (ETDEWEB)

    Camins, I.; Shinn, J.H.

    1988-06-01

    We conducted a survey of commercially available methods for analysis of beryllium and depleted uranium in aerosols and soils to find a reliable, cost-effective, and sufficiently precise method for researchers involved in environmental testing at the Yuma Proving Ground, Yuma, Arizona. Criteria used for evaluation include cost, method of analysis, specificity, sensitivity, reproducibility, applicability, and commercial availability. We found that atomic absorption spectrometry with graphite furnace meets these criteria for testing samples for beryllium. We found that this method can also be used to test samples for depleted uranium. However, atomic absorption with graphite furnace is not as sensitive a measurement method for depleted uranium as it is for beryllium, so we recommend that quality control of depleted uranium analysis be maintained by testing 10 of every 1000 samples by neutron activation analysis. We also evaluated 45 companies and institutions that provide analyses of beryllium and depleted uranium. 5 refs., 1 tab.

  18. Off the Beaten Track-A Hitchhiker's Guide to Beryllium Chemistry.

    Science.gov (United States)

    Naglav, Dominik; Buchner, Magnus R; Bendt, Georg; Kraus, Florian; Schulz, Stephan

    2016-08-26

    This Minireview aims to give an introduction to beryllium chemistry for all less-experienced scientists in this field of research. Up to date information on the toxicity of beryllium and its compounds are reviewed and several basic and necessary guidelines for a safe and proper handling in modern chemical research laboratories are presented. Interesting phenomenological observations are described that are related directly to the uniqueness of this element, which are also put into historical context. Herein we combine the contributions and experiences of many scientist that work passionately in this field. We want to encourage fellow scientists to reconcile the long-standing reservations about beryllium and its compounds and motivate intense research on this spurned element. Who on earth should be able to deal with beryllium and its compounds if not chemists? PMID:27364901

  19. Cancer-induced Expansion and Activation of CD11b(+)Gr-1(+) Cells Predispose Mice to Adenoviral-triggered Anaphylactoid-type Reactions

    NARCIS (Netherlands)

    Pande, K.; Ueda, R.; Machemer, T.; Sathe, M.; Tsai, V.; Brin, E.; Delano, M.J.; Rooijen, van N.; McClanahan, T.K.; Talmadge, J.E.; Moldawer, L.L.; Phillips, J.R.; Laface, D.M.

    2009-01-01

    Intravascular delivery (1.5 x 10(9) particles and higher) of recombinant adenovirus (rAd) induces myeloid cell mediated, self-limiting hemodynamic responses in normal mice. However, we observed anaphylactoid-type reactions and exacerbated hemodynamic events following rAd injection in mice bearing ma

  20. Optimized beryllium target design for indirectly driven inertial confinement fusion experiments on the National Ignition Facility

    International Nuclear Information System (INIS)

    For indirect drive inertial confinement fusion, Beryllium (Be) ablators offer a number of important advantages as compared with other ablator materials, e.g., plastic and high density carbon. In particular, the low opacity and relatively high density of Be lead to higher rocket efficiencies giving a higher fuel implosion velocity for a given X-ray drive; and to higher ablation velocities providing more ablative stabilization and reducing the effect of hydrodynamic instabilities on the implosion performance. Be ablator advantages provide a larger target design optimization space and can significantly improve the National Ignition Facility (NIF) [J. D. Lindl et al., Phys. Plasmas 11, 339 (2004)] ignition margin. Herein, we summarize the Be advantages, briefly review NIF Be target history, and present a modern, optimized, low adiabat, Revision 6 NIF Be target design. This design takes advantage of knowledge gained from recent NIF experiments, including more realistic levels of laser-plasma energy backscatter, degraded hohlraum-capsule coupling, and the presence of cross-beam energy transfer

  1. Toxicology - study of the intracellular localization of beryllium by analytical ion microscopy

    International Nuclear Information System (INIS)

    The intracellular distribution of a beryllium salt in the kidneys of rats was studied by analytical ion microscopy. Beryllium has a special affinity for certain regions of the cellular nuclei where heavy concentrations appear. Examining these same nuclei under an electron microscope enables attention to be drawn to very unusual ultrastructural abnormalities in these same nuclear regions. These observations are to be seen in the light of this element's highly carcinogenic action. (author)

  2. Investigation of high purity beryllium for the International Thermonuclear Experimental Reactor (ITER), Task 002. Final report

    International Nuclear Information System (INIS)

    The report includes a description of experimental abilities of Solid Structure Research Laboratory of IAE NNC RK, a results of microstructural characterization of A-4 grade polycrystal Beryllium produced at the Ulba metal plant and a technical project-for irradiation experiments. Technical project contains a detailed description of five proposed experiments, clearing behavior of Beryllium materials under the influence of irradiation, temperature, helium and hydrogen accumulation. Complex irradiation jobs, microstructural investigations and mechanical tests are planned in the framework of these experiments

  3. Quantitative chemical microdetermination of beryllium with chrome azurol by the ring-oven technique

    International Nuclear Information System (INIS)

    A method for determination of beryllium in minerals and rocks is described. Because of the toxicity of beryllium the method is designed for determination of 1-10 ng of Be. The sample is fused with sodium carbonate and sodium tetraborate. Interfering metals are masked with EDTA. Be is determined by the Weisz ring-oven method with Chrome Azurol. The relative error is 10%. (Author)

  4. Molecular dynamics simulations of deuterium-beryllium interactions under fusion reactor conditions

    OpenAIRE

    Safi, Elnaz

    2014-01-01

    Beryllium (Be) is a strong candidate as plasma-facing material for the main wall of future fusion reactors. Thus, its erosion plays a key role in predicting the reactor's life-time and viability. MD simulations can be a powerful tool to study Be behavior under high plasma particle flux. In this work, beryllium sputtering due to D bombardment is studied using MD simulations. We have analyzed the fundamental mechanisms for Be erosion considering some important parameters that ...

  5. Study of the mechanisms of 11Be (49,2 MeV/nucleon) and 6He (41,5 MeV/nucleon) neutron halo nuclei induced reactions on lead with respect to collisions inelasticity

    International Nuclear Information System (INIS)

    In this work we have shown how the neutron halo structure of nuclei affects reaction mechanisms. Our experimental study was applied to a single-neutron halo nucleus (11Be) and a two-neutron halo nucleus (6He) in their interactions with a lead nucleus target. The experimental setup allowed simultaneous measurement of core and halo neutron momenta, as well as target-nucleus excitation energy. Kinematical properties of the halo neutrons were collected from the new TOURNESOL detector, a liquid scintillator time-of-flight detector of large volume. Characteristics of this detector are well covered in this document. For the two beams, we obtained exclusive measurements in momentum width, distinguishing between break-up, stripping, and core fragmentation, as well as several target-nuclei excitation energy ranges. With 11Be projectile, momentum widths for core nuclei and halo neutrons are in agreement for break-up reactions, and the target nuclei remain non excited. The measured values are about 10 to 15% larger than those given by similar studies done with a core-nucleus collected close to zero degree. Neutron momentum distributions after reactions involving a break-up of the 10Be core were compared to similar data with a 10Be beam. With 6He projectile, we studied correlations between neutrons and core momenta to conclude that break-up reactions exhibit a one-step process and that stripping reactions could occur in both one- or two-step processes. In this later case, the 'di-neutron' structure of 6He ground state is responsible for one-step dissociation process, while 'cigar' structure is most likely responsible for the two-step dissociation process. (author)

  6. The status of beryllium research for fusion in the United States

    International Nuclear Information System (INIS)

    Use of beryllium in fusion reactor has been considered for neutron multiplication in breeding blankets an as an oxygen getter for plasma - facing surface. Previous beryllium research for fusion in the United States included issues of interest to fission (swelling an changes in mechanical and thermal properties) as well as interactions with plasmas and hydrogen isotopes and methods of fabrication. When the United States formally withdrew its participation in the International Experimental Reactor (ITER) program, much of this effort was terminated. The focus in the U.S. has been mainly on toxic effects of beryllium and on industrial hygiene and health-related issues. Work continued at the INEEL (Idaho National Engineering and Environmental Laboratory) and elsewhere on beryllium-containing molten salts. This activity is part of the JUPITER II Agreement. Plasma spray of ITER first wall samples at Los Alamos National Laboratory has been performed under the European Fusion Development Agreement. Effects of irradiation on beryllium structure are being studied at Oak Ridge National Laboratory. Numerical and phenomenological models are being developed and applied at the University of California Los Angels to investigate thermo-mechanical characteristics of beryllium pebble beds, similar to research being carried out at Forschungszentrum Karlsruhe and elsewhere. Additional work, not funded by the fusion program, has dealt with issues of disposal, and recycling. (author)

  7. Preconcentration and separation of ultra-trace beryllium using quinalizarine-modified magnetic microparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ashtari, Parviz, E-mail: pashtari@aeoi.org.ir [State Key Laboratory of Chemo/Biosensing and Chemometrics, Biomedical Engineering Center, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); NFCS, Nuclear Science and Technology Research Institute, PO Box 11365-8486, Tehran (Iran, Islamic Republic of); Wang Kemin; Yang Xiaohai [State Key Laboratory of Chemo/Biosensing and Chemometrics, Biomedical Engineering Center, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); Ahmadi, Seyed Javad [NFCS, Nuclear Science and Technology Research Institute, PO Box 11365-8486, Tehran (Iran, Islamic Republic of)

    2009-07-30

    Magnetically-assisted chemical separation/preconcentration method for the analysis of beryllium from aqueous solutions was developed. According to this method several extractants were coated on certain magnetic microparticles to assist the extraction of beryllium from the aqueous solutions. The influence of different parameters (type and amount of extractant, pH, equilibrium time and ionic strength) was investigated. Also, the interfering effect of various cationic and anionic species on the percent recovery of beryllium was studied. The applied spectrophotometric method showed good linearity and precision at a given wavelength (605.0 nm). Among the extractants used, quinalizarine resulted in almost a full recovery of beryllium at pH 7.4, which was the optimum extraction pH. The equilibrium time of the extraction was 10.0 min. The quantitative re-extraction was carried out by 0.5 M nitric acid. Also, the stability of the extractant-coated magnetic microparticles was 4 cycles (extraction and re-extraction) and the used magnetic microparticles showed good selectivity for beryllium against other cations and anions. Finally, the developed method was applicable for the preconcentration and separation of beryllium from spring water, tap water and certified reference waters. The obtained detection limit was 30 ng L{sup -1}.

  8. The Status of Beryllium Research for Fusion in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Glen R. Longhurst

    2003-12-01

    Use of beryllium in fusion reactors has been considered for neutron multiplication in breeding blankets and as an oxygen getter for plasma-facing surfaces. Previous beryllium research for fusion in the United States included issues of interest to fission (swelling and changes in mechanical and thermal properties) as well as interactions with plasmas and hydrogen isotopes and methods of fabrication. When the United States formally withdrew its participation in the International Thermonuclear Experimental Reactor (ITER) program, much of this effort was terminated. The focus in the U.S. has been mainly on toxic effects of beryllium and on industrial hygiene and health-related issues. Work continued at the INEEL and elsewhere on beryllium-containing molten salts. This activity is part of the JUPITER II Agreement. Plasma spray of ITER first wall samples at Los Alamos National Laboratory has been performed under the European Fusion Development Agreement. Effects of irradiation on beryllium structure are being studied at Oak Ridge National Laboratory. Numerical and phenomenological models are being developed and applied to better understand important processes and to assist with design. Presently, studies are underway at the University of California Los Angeles to investigate thermo-mechanical characteristics of beryllium pebble beds, similar to research being carried out at Forschungszentrum Karlsruhe and elsewhere. Additional work, not funded by the fusion program, has dealt with issues of disposal, and recycling.

  9. Characterization of beryllium deformation using in-situ x-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Magnuson, Eric Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Donald William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Clausen, Bjorn [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sisneros, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Park, Jun-Sang [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-08-24

    Beryllium’s unique mechanical properties are extremely important in a number of high performance applications. Consequently, accurate models for the mechanical behavior of beryllium are required. However, current models are not sufficiently microstructure aware to accurately predict the performance of beryllium under a range of processing and loading conditions. Previous experiments conducted using the SMARTS and HIPPO instruments at the Lujan Center(LANL), have studied the relationship between strain rate and texture development, but due to the limitations of neutron diffraction studies, it was not possible to measure the response of the material in real-time. In-situ diffraction experiments conducted at the Advanced Photon Source have allowed the real time measurement of the mechanical response of compressed beryllium. Samples of pre-strained beryllium were reloaded orthogonal to their original load path to show the reorientation of already twinned grains. Additionally, the in-situ experiments allowed the real time tracking of twin evolution in beryllium strained at high rates. The data gathered during these experiments will be used in the development and validation of a new, microstructure aware model of the constitutive behavior of beryllium.

  10. Minor Modifications of the C-terminal Helix Reschedule the Favored Chemical Reactions Catalyzed by Theta Class Glutathione Transferase T1-1*

    OpenAIRE

    Shokeer, Abeer; Mannervik, Bengt

    2009-01-01

    Adaptive responses to novel toxic challenges provide selective advantages to organisms in evolution. Glutathione transferases (GSTs) play a pivotal role in the cellular defense because they are main contributors to the inactivation of genotoxic compounds of exogenous as well as of endogenous origins. GSTs are promiscuous enzymes catalyzing a variety of chemical reactions with numerous alternative substrates. Despite broad substrate acceptance, individual GSTs display pronounced selectivities ...

  11. Workshop on beryllium for fusion applications. Proceedings. IEA Implementing Agreement for a Programme of Research and Development on Fusion Materials

    International Nuclear Information System (INIS)

    As shown by recent developments beryllium has become one of the most important materials in the development of fusion reactors. It is practically the only neutron multiplier available for blankets with ceramic breeder materials and can be used with liquid metal breeders as well. It is one of the most likely materials to be used on the surface of the first walls and of the divertor. The neutron irradiation behavior of beryllium in a fusion reactor is not well know. Beryllium was extensively irradiated about 25-40 years ago and has been used since then in material testing reactors as reflector. In the meantime, however, beryllium has been improved quite considerably. Today it is possible to obtain commercially beryllium which is much more isotropic and contains smaller ammounts of oxide. There are already indications that these new kinds of beryllium behave better under irradiation. (orig.)

  12. High-resolution neutron-induced (gamma)-ray production cross sections for oxygen and beryllium for neutron energies from 4 to 200 MeV

    International Nuclear Information System (INIS)

    Measurements of discrete gamma-ray spectra from neutron-induced reactions on a Be0 sample have been performed using the broad-spectrum neutron spallation source of the WNR facility at LANSCE. Incident neutron energies were determined by the time-of-flight technique. Two high-purity Ge detectors were used to detect gamma rays in the energy range from 0.150 to 9.0 MeV. Spectra were measured at seven angles. Absolute gamma-ray production cross sections were delermined from the measured neutron fluence and detector efficiencies. A new evaluation of the reaction cross sections has been performed based on this data. GNASH model calculations were performed for 20 < E, < 150 MeV, and are compared with the data. KEY WOlWS: neutron-induced reactions, gamma-ray cross section, measurement, evaluation, oxygen, beryllium, germanium detector

  13. The evaluation and calculation of production cross sections for 11C, 13N and 15O from 11B, 13C, 15N(p,n) and 16O(p,x)13N reactions up to 80 MeV

    International Nuclear Information System (INIS)

    The excitation function of 11B, 13C, 15N(p,n) and 16O(p,α) reactions were measured with the aid of either residual nucleus activity or outgoing neutron methods. In general, there are some experimental data in energy range from threshold to 30 Mev and extrapolation of experimental data up to 80 Mev. The excitation functions of 13C, 15N(p,n) and 16O(p,x)13N reactions were calculated by the code ALICE95 up to 80 Mev. The comparison between calculated cross sections of 13C, 15N(p,n) and 16O(p,x)13N reactions and experimental data from threshold to 80 Mev are given. (8 figs.)

  14. Beryllium in Disk and Halo Stars -- Evidence for a Beryllium Dispersion in Old Stars

    CERN Document Server

    Boesgaard, A M; Boesgaard, Ann Merchant; Novicki, Megan C.

    2006-01-01

    The study of Be in stars of differing metal content can elucidate the formation mechanisms and the Galactic chemical evolution of Be. We have obtained high-resolution, high signal-to-noise spectra of the resonance lines of Be II in eight stars with the high-dispersion spectrograph (HDS) on the Subaru 8.2 m telescope on Mauna Kea. Abundances of Be have been determined through spectrum synthesis. The stars with [Fe/H] values > -1.1 conform to the published general trend of Be vs Fe. We have confirmed the high Be abundance in HD 94028 and have found a similarly high Be abundance in another star, HD 132475, at the same metallicity: [Fe/H] = -1.5. These two stars are 0.5 - 0.6 dex higher in Be than the Be-Fe trend. While that general trend contains the evidence for a Galaxy-wide enrichment in Be and Fe, the higher Be abundances in those two stars indicates local Be enrichments. Possible enrichment mechanisms include hypernovae and multiple supernova explosions contained in a superbubble. The star G 64-37 has [Fe/]...

  15. Characteristics of microstructure and tritium release properties of different kinds of beryllium pebbles for application in tritium breeding modules

    Energy Technology Data Exchange (ETDEWEB)

    Kurinskiy, P.; Vladimirov, P.; Moeslang, A. [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany). Inst. for Applied Materials - Applied Materials Physics (IAM-AWP); Rolli, R. [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany). Inst. for Applied Materials - Materials Biomechanics (IAM-WBM); Zmitko, M. [The European Joint Undertaking for ITER and the Development of Fusion Energy, Barcelona (Spain)

    2013-07-01

    Beryllium pebbles with diameters of 1 mm are considered to be perspective material for the use as neutron multiplier in tritium breeding modules of fusion reactors. Up to now, the main concept of helium-cooled breeding blanket in ITER project foresees the use of 1 mm beryllium pebbles fabricated by company NGK, Japan. It is notable that beryllium pebbles of other types are commercially available at the market. Presented work is dedicated to a study of characteristics of microstructure, packaging density and parameters of tritium release of beryllium pebbles produced by Bochvar Institute, Russian Federation, and Company Materion, USA. (orig.).

  16. Derivation of beryllium guidelines for use in establishing cleanup levels at the Peek Street and Sacandaga sites, New York

    International Nuclear Information System (INIS)

    Guideline levels are derived for beryllium in soil and on indoor surfaces at the Peek Street and Sacandaga sites in the state of New York. On the basis of highly conservative assumptions, the soil beryllium concentration that corresponds to a 10-4 carcinogenic risk level is estimated to be 13 mg/kg at both sites. Calculations indicate that the proposed US Department of Energy guideline of 2 μg/ft2 for beryllium in dust on indoor surfaces would be sufficiently protective of human health. For occupational protection of workers during cleanup operations, Office of Safety and Health Administration standards for beryllium are referenced and restated

  17. Cosmogenic beryllium cycling in a natural forest setting

    Science.gov (United States)

    Conyers, Grace

    10Bemet, or cosmogenic beryllium, has a long half-life of 1.4 million years and quick adsorption on soil particles, which may make it ideal for dating soil erosion in historical context. However, there are questions on about the fundamental assumptions of the retentivity of 10Bemet. This manuscript explores these assumptions and the context of nutrient cycling in a natural forest setting. To see if 10Bemet was being cycled through the trees, and at what rate, we looked at the[10Bemet ] in the soil, 4 species of trees, and their leaves. The isotopic ratio 10Be/9Be in all four tree species was comparable to the soil on which they grow, ranging from 6-8 x 10 -9. However, there was one exception with hickory (Carya spp.) which strongly bioaccumulate beryllium with an average of 0.38 ppm dry weight in the wood. Abscised hickory leaves have a higher [Be] of 2.0 ppm, over 10 times higher than in the soil. Using standard allometric equations relating tree biomass to trunk diameter, and assuming that belowground biomass has the same [Be] as aboveground, we calculate that hickory trees at our site contain approximately 1% of the total 10Bemet under their canopy and that ~10% of this Be is cycled annually by leaf abscission. It is not clear at this point what fraction of litterfall Be is recycled into the plant, returned to the soil, or carried to groundwater as organic chelates. Hickory trees occupy an average of ~10% of the oak-hickory forest area. Assuming that trees are randomly distributed, that litterfall Be is returned to the soil, and maintaining a constant 10Bemet budget over time for simplicity, then more than half of all 10Be met in the forest soil will have passed through a hickory tree over the past 10 ky. Fully 90% of all 10Bemet will pass through a hickory tree over a period of ~25 ky. It is clear that hickory trees can transport a sizable fraction of the total 10Bemet in their nutrient cycle, and that they may be responsible for landscape-scale Be mobility.

  18. 11例心脏外科手术患者类过敏反应的护理%Nursing of anaphylactoid reaction of 11 patients undergoing cardiosurgical operation

    Institute of Scientific and Technical Information of China (English)

    刘希伶; 姜妮; 陈伟新; 冯东杰

    2008-01-01

    总结11例心脏外科手术患者发生类过敏反应的护理经验.对患者术中及术终出现的类过敏反应进行分析处理,排除临床一切有可能的引起类过敏反应的原因;维持有效循环,保证重要脏器功能;维持水电解质平衡,纠正酸中毒;加强肺部并发症的治疗及护理.经全力抢救,10例康复,1例因多器官功能衰竭死亡.

  19. Monitoring beryllium during site cleanup and closure using a real-time analyzer

    Energy Technology Data Exchange (ETDEWEB)

    Schlager, R.J.; Sappey, A.D.; French, P.D. [ADA Technologies, Inc., Englewood, CO (United States)

    1998-12-31

    Beryllium metal has a number of unique properties that have been exploited for use in commercial and government applications. Airborne beryllium particles can represent a significant human health hazard if deposited in the lungs. These particles can cause immunologically-mediated chronic granulomatous lung disease (chronic beryllium disease). Traditional methods of monitoring airborne beryllium involve collecting samples of air within the work area using a filter. The filter then undergoes chemical analysis to determine the amount of beryllium collected during the sampling period. These methods are time-consuming and results are known only after a potential exposure has occurred. The need for monitoring exposures in real time has prompted government and commercial companies to develop instrumentation that will allow for the real time assessment of short-term exposures so that adequate protection for workers in contaminated environments can be provided. Such an analyzer provides a tool that will allow government and commercial sites to be cleaned up in a more safe and effective manner since exposure assessments can be made instantaneously. This paper describes the development and initial testing of an analyzer for monitoring airborne beryllium using a technique known as Laser-Induced Breakdown Spectroscopy (LIBS). Energy from a focused, pulsed laser is used to vaporize a sample and create an intense plasma. The light emitted from the plasma is analyzed to determine the quantity of beryllium in the sampled air. A commercial prototype analyzer has been fabricated and tested in a program conducted by Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Lovelace Respiratory Research Institute, and ADA Technologies, Inc. Design features of the analyzer and preliminary test results are presented.

  20. In-pile thermocycling testing and post-test analysis of beryllium divertor mockups

    Energy Technology Data Exchange (ETDEWEB)

    Giniatulin, R.; Mazul, I. [Efremov Inst., St. Petersburg (Russian Federation); Melder, R.; Pokrovsky, A.; Sandakov, V.; Shiuchkin, A.

    1998-01-01

    The main damaging factors which impact the ITER divertor components are neutron irradiation, cyclic surface heat loads and hydrogen environment. One of the important questions in divertor mockups development is the reliability of beryllium/copper joints and the beryllium resistance under neutron irradiation and thermal cycling. This work presents the experiment, where neutron irradiation and thermocyclic heat loads were applied simultaneously for two beryllium/copper divertor mockups in a nuclear reactor channel to simulate divertor operational conditions. Two mockups with different beryllium grades were mounted facing each other with the tantalum heater placed between them. This device was installed in the active zone of the nuclear reactor SM-2 (Dimitrovgrad, Russia) and the tantalum block was heated by neutron irradiation up to a high temperature. The main part of the heat flux from the tantalum surface was transported to the beryllium surface through hydrogen, as a result the heat flux loaded two mockups simultaneously. The mockups were cooled by reactor water. The device was lowered to the active zone so as to obtain the heating regime and to provide cooling lifted. This experiment was performed under the following conditions: tantalum heater temperature - 1950degC; hydrogen environment -1000 Pa; surface heat flux density -3.2 MW/m{sup 2}; number of thermal cycles (lowering and lifting) -101; load time in each cycle - 200-5000 s; dwell time (no heat flux, no neutrons) - 300-2000 s; cooling water parameters: v - 1 m/s, Tin - 50degC, Pin - 5 MPa; neutron fluence -2.5 x 10{sup 20} cm{sup -2} ({approx}8 years of ITER divertor operation from the start up). The metallographic analysis was performed after experiment to investigate the beryllium and beryllium/copper joint structures, the results are presented in the paper. (author)

  1. Post test investigation of the single rod tests ESSI 1-11 on temperature escalation in PWR fuel rod simulators due to the Zircaloy/steam reaction

    International Nuclear Information System (INIS)

    This KfK-report describes the posttest investigation of the single rod tests ESSI-1 to ESSI-11. The objective of these tests was to investigate the temperature escalation behaviour of Zircaloy clad PWR-fuel rods in steam. The investigation of the temperature escalation is part of the program of out-of-pile experiments (CORA) performed within the frame work of the PNS Severe Fuel Damage Program. The experimental arrangement consisted of fuel rod simulator (central tungsten heater, UO2 ring pellets and Zircaloy cladding), Zircaloy shroud and fiber ceramic insulation. The introductory test ESSI-1 to ESSI-3 were scoping tests designed to obtain information on the temperature escalation of zircaloy in steam. ESSI-4 to ESSI-8 were run with increasing heating rates to investigate the influence of the oxide layer thickness at the start of the escalation. ESSI-9 to ESSI-11 were performed to investigate the influence of the insulation thickness on the escalation behaviour. In these tests we also learned that the gap between removed shroud and insulation has a remarkable influence due to heat removal by convection in the gap. After the test the fuel rod simulator was embedded into epoxy and cut by a diamond saw. The cross sections were photographed and investigated by metalograph microscope, SEM and EMP examinations. (orig./GL)

  2. Investigation of the glide modes of single crystals of beryllium

    International Nuclear Information System (INIS)

    The flow characteristics of single crystals of beryllium specially oriented for slip along a single plane and a single direction have been thoroughly investigated. The elastic limit and the strain hardening in basal glide have been investigated in the temperature range (-195 deg. C, 400 deg. C) in tension as well as in compression. Observation of the slip lines and of the dislocation configurations have also been made in addition to the mechanical tests. The prismatic slip has been studied in greater detail: tensile tests have been performed on specimens carefully oriented at different temperatures, strain rates and with varying orientations of the basal and of the prism planes. Tests have also been made in the micro-strain range; the slip lines and the dislocation arrangements were observed in detail. The very unusual variation of the elastic limit with temperature is not due to impurities but to a cross slip mechanism. A model of dislocation locking is proposed to account for the experimental results. This mechanism assumes that the a-bar dislocations may also dissociate on the prism planes [101-bar 0]. Various possible dissociations are suggested, the most probable of which corresponds to the phase transformation: Hexagonal close packed to body centered cubic. This proposal can be extended to account for the relative ease of glide on the different systems in the hexagonal close packed metals. (author)

  3. Isotope shift in the electron affinity of beryllium

    International Nuclear Information System (INIS)

    The study of the isotope shift in the electron affinity is interesting for probing correlation effects. Experiments that allow this property to be measured are rare, being difficult to realize, while accurate calculations remain a challenge for atomic theory. The present work focuses on the theoretical estimation of the isotope shift in the electron affinity of Be (2s2p 3Po), using correlated electronic wavefunctions obtained from multiconfiguration Hartree-Fock and configuration interaction variational calculations. The reliability of the correlation models is assessed from a comparison between the observed and theoretical electron affinities, and between theoretical isotope shift values for the 2s2p 3Po 2s21S transition of neutral beryllium. The sign and the magnitude of the difference between the mass polarization term expectation values obtained for the neutral atom and the negative ion are such that the resulting isotope shift in the electron affinity is 'anomalous', corresponding to a smaller electron affinity for the heavier isotope

  4. Project SAPPHIRE uranium-beryllium dose rate analysis

    International Nuclear Information System (INIS)

    During a six-week period in the fall of 1994 a team of 31 US government and Y-12 personnel packaged and removed several thousand kilograms of material containing highly enriched uranium from the (former Soviet Union) Republic of Kazakhstan for interim storage at the Y-12 Plant in Oak Ridge, Tennessee. This classified mission, known as PROJECT SAPPHIRE, had been initiated at the request of the Kazakhstan government in order to rid itself of possible security problems. Planning for the mission included assurance of the health and safety of the team members, as well as compliance with all local, IAEA, and US government regulations regarding the handling, packaging, transportation, and storage of radioactive and fissile material. The mission classification restrictions were relaxed following the return of the team and material to the United States. The material to be removed, in the form of small billets and rods of uranium metal and uranium-beryllium alloy and oxide powder, was sealed by team members on site into two-liter steel cans. Two or three cans each were loaded into more than 400 IAEA certified fissile material shipping container, and each container was packed into a large steel drum for transport by US Air Force cargo planes to the United States

  5. Beryllium neutron activation detector for pulsed DD fusion sources

    International Nuclear Information System (INIS)

    A compact fast neutron detector based on beryllium activation has been developed to perform accurate neutron fluence measurements on pulsed DD fusion sources. It is especially well suited to moderate repetition-rate (9Be(n,α)6He cross-section, energy calibration of the proportional counters, and numerical simulations of neutron interactions and beta-particle paths using MCNP5. The response function R(En) is determined over the neutron energy range 2-4 MeV. The count rate capability of the detector has been studied and the corrections required for high neutron fluence measurements are discussed. For pulsed DD neutron fluencies >3×104 cm-2, the statistical uncertainty in the fluence measurement is better than 1%. A small plasma focus device has been employed as a pulsed neutron source to test two of these new detectors, and their responses are found to be practically identical. Also the level of interfering activation is found to be sufficiently low as to be negligible.

  6. Design of the beryllium window for Brookhaven Linac Isotope Producer

    Energy Technology Data Exchange (ETDEWEB)

    Nayak, S. [Brookhaven National Lab. (BNL), Upton, NY (United States); Mapes, M. [Brookhaven National Lab. (BNL), Upton, NY (United States); Raparia, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-11-01

    In the Brookhaven Linac Isotope Producer (BLIP) beam line, there were two Beryllium (Be) windows with an air gap to separate the high vacuum upstream side from low vacuum downstream side. There had been frequent window failures in the past which affected the machine productivity and increased the radiation dose received by workers due to unplanned maintenance. To improve the window life, design of Be window is reexamined. Detailed structural and thermal simulations are carried out on Be window for different design parameters and loading conditions to come up with better design to improve the window life. The new design removed the air gap and connect the both beam lines with a Be window in-between. The new design has multiple advantages such as 1) reduces the beam energy loss (because of one window with no air gap), 2) reduces air activation due to nuclear radiation and 3) increased the machine reliability as there is no direct pressure load during operation. For quick replacement of this window, an aluminum bellow coupled with load binder was designed. There hasn’t been a single window failure since the new design was implemented in 2012.

  7. Design of the beryllium window for Brookhaven Linac Isotope Producer

    International Nuclear Information System (INIS)

    In the Brookhaven Linac Isotope Producer (BLIP) beam line, there were two Beryllium (Be) windows with an air gap to separate the high vacuum upstream side from low vacuum downstream side. There had been frequent window failures in the past which affected the machine productivity and increased the radiation dose received by workers due to unplanned maintenance. To improve the window life, design of Be window is reexamined. Detailed structural and thermal simulations are carried out on Be window for different design parameters and loading conditions to come up with better design to improve the window life. The new design removed the air gap and connect the both beam lines with a Be window in-between. The new design has multiple advantages such as 1) reduces the beam energy loss (because of one window with no air gap), 2) reduces air activation due to nuclear radiation and 3) increased the machine reliability as there is no direct pressure load during operation. For quick replacement of this window, an aluminum bellow coupled with load binder was designed. There hasn't been a single window failure since the new design was implemented in 2012.

  8. Waterlike structural and excess entropy anomalies in liquid beryllium fluoride.

    Science.gov (United States)

    Agarwal, Manish; Chakravarty, Charusita

    2007-11-22

    The relationship between structural order metrics and the excess entropy is studied using the transferable rigid ion model (TRIM) of beryllium fluoride melt, which is known to display waterlike thermodynamic anomalies. The order map for liquid BeF2, plotted between translational and tetrahedral order metrics, shows a structurally anomalous regime, similar to that seen in water and silica melt, corresponding to a band of state points for which average tetrahedral (q(tet)) and translational (tau) order are strongly correlated. The tetrahedral order parameter distributions further substantiate the analogous structural properties of BeF2, SiO2, and H2O. A region of excess entropy anomaly can be defined within which the pair correlation contribution to the excess entropy (S2) shows an anomalous rise with isothermal compression. Within this region of anomalous entropy behavior, q(tet) and S2 display a strong negative correlation, indicating the connection between the thermodynamic and the structural anomalies. The existence of this region of excess entropy anomaly must play an important role in determining the existence of diffusional and mobility anomalies, given the excess entropy scaling of transport properties observed in many liquids. PMID:17963376

  9. Beryllium-induced immune response in C3H mice

    International Nuclear Information System (INIS)

    Studies conducted at ITRI over the past several years have investigated whether Beagle dogs, monkeys, and mice are suitable models for human chronic beryllium-induced lung disease (CBD). Recent studies have focused on the histopathological and immunopathological changes occurring in A/J and C3H/HeJ mice acutely exposed by inhalation to Be metal. Lung lesions in both strains of mice included focal lymphocyte aggregates comprised primarily of B lymphocytes and lesser amounts of T-helper lymphocytes and microgranulomas consisting chiefly of macrophages and T-helper lymphocytes. The distribution of proliferating cells within the microgranulomas was similar to the distribution of T-helper cells. These results strongly suggested that A/J and C3H/HeJ mice responded to inhaled Be metal in a fashion similar to humans in terms of pulmonary lesions and the apparent in situ proliferation of T-helper cells. Results of these studies confirm lymphocyte involvement in the pulmonary response to inhaled Be metal

  10. Beryllium-induced immune response in C3H mice

    Energy Technology Data Exchange (ETDEWEB)

    Benson, J.M.; Bice, D.E.; Nikula, K.J. [and others

    1995-12-01

    Studies conducted at ITRI over the past several years have investigated whether Beagle dogs, monkeys, and mice are suitable models for human chronic beryllium-induced lung disease (CBD). Recent studies have focused on the histopathological and immunopathological changes occurring in A/J and C3H/HeJ mice acutely exposed by inhalation to Be metal. Lung lesions in both strains of mice included focal lymphocyte aggregates comprised primarily of B lymphocytes and lesser amounts of T-helper lymphocytes and microgranulomas consisting chiefly of macrophages and T-helper lymphocytes. The distribution of proliferating cells within the microgranulomas was similar to the distribution of T-helper cells. These results strongly suggested that A/J and C3H/HeJ mice responded to inhaled Be metal in a fashion similar to humans in terms of pulmonary lesions and the apparent in situ proliferation of T-helper cells. Results of these studies confirm lymphocyte involvement in the pulmonary response to inhaled Be metal.

  11. Manufacture of sintered bricks of high density from beryllium oxide

    International Nuclear Information System (INIS)

    Beryllium oxide bricks of nuclear purity 100 x 100 x 50 and 100 x 100 x 100 mm of very high density (between 2.85 and 3.00) are manufactured by sintering under pressure in graphite moulds at temperatures between 1,750 and 1,850 deg. C, and under a pressure of 150 kg/cm2. The physico-chemical state of the saw material is of considerable importance with regard to the success of the sintering operation. In addition, a study of the sintering of a BeO mixture with 3 to 5 per cent of boron introduced in the form of boric acid, boron carbide or elementary boron shows that high densities can only be obtained by sintering under pressure. For technical reasons of manufacture, only the mixture based on boron carbide is used. The sintering is carried out in graphite moulds at 1500 deg. C under 150 kg/cm2 pressure, and bricks can be obtained with density between 2,85 and 2,90. Laboratory studies and the industrial manufacture of various sinters are described in detail. (author)

  12. Calculation of fusion time scales in 11B + 237Np, 12C + 232Th and 16O + 232Th reactions in a dynamical trajectory model

    International Nuclear Information System (INIS)

    There are several theoretical models which treat the fusion process and energy dissipation in heavy ion collision in terms of a fluctuating force represented by the coupling between macroscopic and intrinsic degrees of freedom. One such dynamical model has been developed by Feldmeier (1987), where the properties of the dissipative force are determined from a microscopic picture of particle exchange between two nuclei. The macroscopic shapes of the nuclear system are represented by axially symmetric configuration with sharp surfaces. We have used the above model to calculate the fusion time scales for the systems 11B + 237Np, 12C +232Th and 16O + 232Th at 77, 86 and 104 MeV bombarding energies to examine the effect of mass asymmetry in fusion dynamics. (author). 2 figs

  13. Inherent structure features of beryllium and their influence on the performance polycrystalline metal under different conditions

    International Nuclear Information System (INIS)

    The anisotropy of physical properties of beryllium single crystals resulting from covalent bonds in crystal lattice leads to significant residual thermal microstresses (RTM) in the polycrystalline metal. It is demonstrated experimentally that there is a simple linear dependence between the magnitude of RTM and the ultimate tensile strength. The factors controlling RTM are analysed and in the framework of powder metallurgy process the technological methods of producing beryllium with the needed properties are recommended. Primarily it is necessary to control the quantity and extent of dispersity of intergranular oxide inclusions and mean grain size in combination with the high degree of macro- and microhomogenity of the structure. The requirements to beryllium microstructure for different operating conditions including neutron fluxes and transient temperature fields are formulated. In the framework of the concept under development one can explain formerly not fully understandable effects, which are characteristic of polycrystalline beryllium such as unexpected Petch-Stro curve, the role of twinning etc., and predict new ones. In particular, it can be possible to expect the growth of ductility of high strength beryllium grades as neutron irradiated. (author)

  14. Parametric studies of carbon erosion mitigation dynamics in beryllium seeded deuterium plasmas

    International Nuclear Information System (INIS)

    The characteristic time of protective beryllium layer formation on a graphite target, τBe/C, has been investigated as a function of surface temperature, Ts, ion energy, Ei, ion flux, Γi, and beryllium ion concentration, cBe, in beryllium seeded deuterium plasma. τBe/C is found to be strongly decreased with increasing Ts in the range of 550-970K. This is thought to be associated with the more efficient formation of beryllium carbide (Be2C). By scanning the parameters, a scaling expression for τBe/C has been derived as τBe/C[s]=1.0x10-7cBe-1.9+/-0.1Ei0.9+/-0.3Γi-0.6+/-0.3exp ((4.8+/-0.5)x103/Ts) where cBe is dimensionless, Ei in eV, Γi in 1022m-2s-1 and Ts in K. Should this scaling extend to an ITER scenario, carbon erosion of the divertor strike point region may be reduced with characteristic time of ∼6ms. This is much shorter than the time between predicted ITER type I ELMs (∼1s), and suggests that protective beryllium layers can be formed in between ELMs, and mitigate carbon erosion.

  15. Beryllium and lithium resource requirements for solid blanket designs for fusion reactors

    International Nuclear Information System (INIS)

    The lithium and beryllium requirements are analyzed for an economy of 106 MW(e) CTR3 capacity using solid blanket fusion reactors. The total lithium inventory in fusion reactors is only approximately 0.2 percent of projected U. S. resources. The lithium inventory in the fusion reactors is almost entirely 6Li, which must be extracted from natural lithium. Approximately 5 percent of natural lithium can be extracted as 6Li. Thus the total feed of natural lithium required is approximately 20 times that actually used in fusion reactors, or approximately 4 percent of U. S. resources. Almost all of this feed is returned to the U. S. resource base after 6Li is extracted, however. The beryllium requirements are on the order of 10 percent of projected U. S. resources. Further, the present cost of lithium and the cost of beryllium extraction could both be increased tenfold with only minor effects on CTR capital cost. Such an increase should substantially multiply the economically recoverable resources of lithium and beryllium. It is concluded that there are no lithium or beryllium resource limitations preventing large-scale implementation of solid blanket fusion reactors. (U.S.)

  16. The effects of beryllium metal particles on the viability and function of cultured rat alveolar macrophages

    International Nuclear Information System (INIS)

    Rat pulmonary alveolar macrophages (PAM) were exposed in vitro to beryllium metal particles. The particles used were relatively large (Be-II) and small (Be-V) size fractions of beryllium metal obtained from an aerosol cyclone, and a beryllium metal aerosol generated by laser vaporization of beryllium metal in an argon atmosphere (Be-L). Glass beads (GB) were used as a negative control particle. The endpoints examined included cell killing (trypan blue dye exclusion) and phagocytic ability (sheep red blood cell uptake). Phagocytic ability was inhibited by beryllium particles at concentrations that did not cause appreciable cell killing. Results based on the mass concentration of particles in culture medium were transformed by the amount of specific surface area of the particles to permit expression of toxicity on the basis of amount of surface area of particles per unit volume of culture medium. On a mass concentration basis, the order of cytotoxicity was Be-L > Be-V ∼ Be-II > GB; for inhibition of phagacytosis, the cytotoxicity order was Be-L ∼ Be-V > Be-II > GB. On a surface area concentration basis, the order of toxicity for viability was altered to Be-II > Be-L ∼ Be-V (with GB indeterminant) and to Be-V > Be-II ∼ Be-L > GB for inhibition of phagocytosis. We conclude that there are factors in addition to specific surface area that influence the expression of toxic effects in cultured PAM. (author)

  17. Clinical approach to chronic beryllium disease and other nonpneumoconiotic interstitial lung diseases.

    Science.gov (United States)

    Maier, Lisa A

    2002-10-01

    Exposures in the workplace result in a diverse set of diseases ranging from the pneumoconiosis to other interstitial lung diseases to acute lung injury. Physician awareness of the potential disease manifestations associated with specific exposures is important in defining these diseases and in preventing additional disease. Most occupational diseases mimic other forms of lung disease, including pulmonary fibrosis, sarcoidosis, adult respiratory distress syndrome (ARDS), and bronchiolitis. A "sarcoidosis"-like syndrome, usually limited to the lungs, may result from exposure to bioaerosols and a number of metals. Exposure to beryllium in the workplace produces a granulomatous lung disease clinically indistinguishable from sarcoidosis, chronic beryllium disease (CBD). Beryllium's ability to produce a beryllium-specific immune response is used in the beryllium lymphocyte proliferation tests to confirm a diagnosis of CBD and exclude sarcoidosis. Exposure to other metals must also be considered in the differential diagnosis of sarcoidosis. When an individual presents acutely with ARDS or acute lung injury, an acute inhalational exposure must be considered. Exposure to a number of irritant substances at high levels may cause a "chemical pneumonitis" or acute lung injury, depending on the solubility and physicochemical properties of the substance. Some of the most notable agents include nitrogen and sulfur oxides, phosgene, and smoke breakdown products. Ingestion of paraquat may also result in an ARDS syndrome, with pulmonary fibrosis eventually resulting. Bronchiolitis is a rare manifestation of inhalational exposures but must also be considered in the clinical evaluation of inhalational exposure. PMID:12362066

  18. Manufacturing and thermomechanical testing of actively cooled all beryllium high heat flux test pieces

    Energy Technology Data Exchange (ETDEWEB)

    Vasiliev, N.N.; Sokolov, Yu.A.; Shatalov, G.E. [and others

    1995-09-01

    One of the problems affiliated to ITER high heat flux elements development is a problem of interface of beryllium protection with heat sink routinely made of copper alloys. To get rid of this problem all beryllium elements could be used as heat receivers in places of enhanced thermal loads. In accordance with this objectives four beryllium test pieces of two types have been manufactured in {open_quotes}Institute of Beryllium{close_quotes} for succeeding thermomechanical testing. Two of them were manufactured in accordance with JET team design; they are round {open_quotes}hypervapotron type{close_quotes} test pieces. Another two ones are rectangular test sections with a twisted tape installed inside of the circular channel. Preliminary stress-strain analysis have been performed for both type of the test pieces. Hypervapotrons have been shipped to JET where they were tested on JET test bed. Thermomechanical testing of pieces of the type of {open_quotes}swirl tape inside of tube{close_quotes} have been performed on Kurchatov Institute test bed. Chosen beryllium grade properties, some details of manufacturing, results of preliminary stress-strain analysis and thermomechanical testing of the test pieces {open_quotes}swirl tape inside of tube{close_quotes} type are given in this report.

  19. X-ray drive of beryllium capsule implosions at the National Ignition Facility

    Science.gov (United States)

    Wilson, D. C.; Yi, S. A.; Simakov, A. N.; Kline, J. L.; Kyrala, G. A.; Dewald, E. L.; Tommasini, R.; Ralph, J. E.; Olson, R. E.; Strozzi, D. J.; Celliers, P. M.; Schneider, M. B.; MacPhee, A. G.; Zylstra, A. B.; Callahan, D. A.; Hurricane, O. A.; Milovich, J. L.; Hinkel, D. E.; Rygg, J. R.; Rinderknecht, H. G.; Sio, H.; Perry, T. S.; Batha, S.

    2016-05-01

    National Ignition Facility experiments with beryllium capsules have followed a path begun with “high-foot” plastic capsule implosions. Three shock timing keyhole targets, one symmetry capsule, a streaked backlit capsule, and a 2D backlit capsule were fielded before the DT layered shot. After backscatter subtraction, laser drive degradation is needed to match observed X-ray drives. VISAR measurements determined drive degradation for the picket, trough, and second pulse. Time dependence of the total Dante flux reflects degradation of the of the third laser pulse. The same drive degradation that matches Dante data for three beryllium shots matches Dante and bangtimes for plastic shots N130501 and N130812. In the picket of both Be and CH hohlraums, calculations over-estimate the x-ray flux > 1.8 keV by ∼100X, while calculating the total flux correctly. In beryllium calculations these X-rays cause an early expansion of the beryllium/fuel interface at ∼3 km/s. VISAR measurements gave only ∼0.3 km/s. The X-ray drive on the Be DT capsule was further degraded by an unplanned decrease of 9% in the total picket flux. This small change caused the fuel adiabat to rise from 1.8 to 2.3. The first NIF beryllium DT implosion achieved 29% of calculated yield, compared to CH capsules with 68% and 21%.

  20. Material selection for extended life of the beryllium reflectors in the JMTR

    International Nuclear Information System (INIS)

    The Japan Materials Test Reactor (JMTR) has been one of the most significant high-energy test reactors in the world since achieving its first criticality in 1968. Beryllium has been used as the reflector element material in the reactor, specifically S-200F structural grade beryllium manufactured by Brush Wellman Inc. The JMTR is currently in the process of being refurbished, and the upgraded reactor will return to service in 2011. As a part of the reactor upgrade, the Japan Atomic Energy Agency (JAEA) also has plans to extend the operating lifetime of the beryllium reflector elements. In order to do that, it will first be necessary to determine which of the material's physical and mechanical properties will be the most influential on that choice. Selecting a different grade of beryllium material for the reflector elements to extend operational lifetime under neutron irradiation is discussed in detail. A new plan for irradiation testing to evaluate the various beryllium grades under consideration is also briefly described. (author)