WorldWideScience

Sample records for berkelium alloys

  1. New berkelium isotope: 242Bk

    International Nuclear Information System (INIS)

    A new isotope of berkelium, 242Bk, was produced with a cross section of approx. 10 μb in reactions of boron on uranium and nitrogen on thorium. It decays by electron capture with a half-life of 7 +- 1.3 minutes. The branching ratio for this isotope for alpha decay is less than 1% and that for spontaneous fission is less than 0.03%. 2 figures, 2 tables

  2. Characterization of berkelium(III) dipicolinate and borate compounds in solution and the solid state.

    Science.gov (United States)

    Silver, Mark A; Cary, Samantha K; Johnson, Jason A; Baumbach, Ryan E; Arico, Alexandra A; Luckey, Morgan; Urban, Matthew; Wang, Jamie C; Polinski, Matthew J; Chemey, Alexander; Liu, Guokui; Chen, Kuan-Wen; Van Cleve, Shelley M; Marsh, Matthew L; Eaton, Teresa M; van de Burgt, Lambertus J; Gray, Ashley L; Hobart, David E; Hanson, Kenneth; Maron, Laurent; Gendron, Frédéric; Autschbach, Jochen; Speldrich, Manfred; Kögerler, Paul; Yang, Ping; Braley, Jenifer; Albrecht-Schmitt, Thomas E

    2016-08-26

    Berkelium is positioned at a crucial location in the actinide series between the inherently stable half-filled 5f(7) configuration of curium and the abrupt transition in chemical behavior created by the onset of a metastable divalent state that starts at californium. However, the mere 320-day half-life of berkelium's only available isotope, (249)Bk, has hindered in-depth studies of the element's coordination chemistry. Herein, we report the synthesis and detailed solid-state and solution-phase characterization of a berkelium coordination complex, Bk(III)tris(dipicolinate), as well as a chemically distinct Bk(III) borate material for comparison. We demonstrate that berkelium's complexation is analogous to that of californium. However, from a range of spectroscopic techniques and quantum mechanical calculations, it is clear that spin-orbit coupling contributes significantly to berkelium's multiconfigurational ground state. PMID:27563098

  3. Extraction of tetravalent berkelium and cerium by aliquate-336-S-NO3 quaternary ammonium salt

    International Nuclear Information System (INIS)

    Extraction of tetravalent berkelium and cerium by aliquate-336-S-NO3 quaternary ammonium salt from nitric acid solutions is investigated. The effect of concentrations of nitric acid and extracting agent, nature of an oxidant (potassium bromate, potassium bichromate, mixture of AgNO3 and (NH4)2S2O8) and solvent on the distribution coefficient of berkelium(4) and cerium(4) is studied. It is established that solutions of aliquate-336-S-NO3 in carbon tetrachloride and dichloroethane extract quantitatively tetravalent berkelium from 10-12 M nitric acid solutions and cerium - from 1-10 M nitric acid solutions containing potassium bichromate as an oxidant. It is shown that the value of distribution coefficient for berkelium and cerium depends on the nature of an oxidant and extracting agent concentration. It is established that in the case of extraction by quaternary ammonium salt with one berkelium(4) mole four aliquate-336-SNO3 moles are associated and 1.5-1.6 mole of extracting agent are associated with one cerium(4) mole. It permits to make a conclusion that stoichiometry of extraction reactions by quaternary ammonium salt is not the same for tetravalent berkelium and cerium. It is shown that trivalent transplutonium and rare earth elements are not practically extracted by aliquate-336-S-NO3 from nitric acid solutions

  4. Electrical Resistance Alloys and Low-Expansion Alloys

    DEFF Research Database (Denmark)

    Kjer, Torben

    1996-01-01

    The article gives an overview of electrical resistance alloys and alloys with low thermal expansion. The electrical resistance alloys comprise resistance alloys, heating alloys and thermostat alloys. The low expansion alloys comprise alloys with very low expansion coefficients, alloys with very low...... thermoelastic coefficients and age hardenable low expansion alloys....

  5. Vanadium alloys: development strategy

    International Nuclear Information System (INIS)

    A strategy for the development of vanadium alloys for use in radiation environments is outlined. An attractive reference alloy (V-15Cr-5Ti) has been identified. The critical issues in developing vanadium base alloys are summarized

  6. Translating VDM to Alloy

    DEFF Research Database (Denmark)

    Lausdahl, Kenneth

    2013-01-01

    specifications. However, to take advantage of the automated analysis of Alloy, the model-oriented VDM specifications must be translated into a constraint-based Alloy specifications. We describe how a sub- set of VDM can be translated into Alloy and how assertions can be expressed in VDM and checked by the Alloy...

  7. Alloyed steel

    International Nuclear Information System (INIS)

    The composition and properties are listed of alloyed steel for use in the manufacture of steam generators, collectors, spacers, emergency tanks, and other components of nuclear power plants. The steel consists of 0.08 to 0.11% w.w. C, 0.6 to 1.4% w.w. Mn, 0.35 to 0.6% w.w. Mo, 0.02 to 0.07% w.w. Al, 0.17 to 0.37% w.w. Si, 1.7 to 2.7% w.w. Ni, 0.03 to 0.07% w.w. V, 0.005 to 0.012% w.w. N, and the rest is Fe. The said steel showed a sufficiently low transition temperature between brittle and tough structures, a greater depth of hardenability, and better weldability than similar steels. (B.S.)

  8. Alloy Fabrication Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL’s Alloy Fabrication Facility in Albany, OR, researchers conduct DOE research projects to produce new alloys suited to a variety of applications, from gas...

  9. Terbium base alloy

    International Nuclear Information System (INIS)

    Composition of terbium-5-7 % gadolinium alloy with high magnetostriction sensitivity (180x10-8 Oe) is suggested. The alloy is designed for usage under cryogenic temperature within 500-1500 Oe fields. Magnetostriction sensitivity of the suggested alloy is by 2-2.5 times higher, than that of well-known before one. 1 tab

  10. F-Alloy: An Alloy Based Model Transformation Language

    OpenAIRE

    Gammaitoni, Loïc; Kelsen, Pierre

    2015-01-01

    Model transformations are one of the core artifacts of a model-driven engineering approach. The relational logic language Alloy has been used in the past to verify properties of model transformations. In this paper we introduce the concept of functional Alloy modules. In essence a functional Alloy module can be viewed as an Alloy module representing a model transformation. We describe a sublanguage of Alloy called F-Alloy that allows the specification of functional Alloy modules. Module...

  11. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James; Shingledecker, John Paul; Santella, Michael Leonard; Schneibel, Joachim Hugo; Sikka, Vinod Kumar; Vinegar, Harold J.; John, Randy Carl; Kim, Dong Sub

    2012-06-05

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tublar that is at least partially made from a material containing at least one of the metal alloys.

  12. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

    2010-08-31

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

  13. Biocompatibility of dental alloys

    Energy Technology Data Exchange (ETDEWEB)

    Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

    2001-10-01

    Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

  14. The DynAlloy Visualizer

    OpenAIRE

    Bendersky, Pablo; Galeotti, Juan Pablo; Garbervetsky, Diego

    2014-01-01

    We present an extension to the DynAlloy tool to navigate DynAlloy counterexamples: the DynAlloy Visualizer. The user interface mimics the functionality of a programming language debugger. Without this tool, a DynAlloy user is forced to deal with the internals of the Alloy intermediate representation in order to debug a flaw in her model.

  15. Superplasticity in titanium alloys

    OpenAIRE

    J. Sieniawski; Motyka, M.

    2007-01-01

    Purpose: The paper reports characteristic of superplasticity phenomenon in titanium alloys and possibility of its applications.Design/methodology/approach: The main objective of the paper is to show features of superplastic forming of titanium alloys and current research trends aiming at widespread application of this technology.Findings: In the paper characteristic of selected superplastic titanium alloys was presented. The effect of microstructural parameters on superplasticity was consider...

  16. Corrosion resistant amorphous alloys

    International Nuclear Information System (INIS)

    A review of publication data on corrosion resistance of amorphous alloys and the methods of amorphization of surface layers of massive materials (laser treatment, iron implantation, detonation-gas spraying, cathode and ion sputtering, electrodeposition) was made. A study was made on corrosion properties of Fe66Cr11B10Si4 alloy in cast state and after laser irradiation, rendering the surface amorphous as well as the samples of Arenco iron and steel 20 with ion-plasma coatings of Fe-Cr-Ni-Ti alloy. It was established that amorphous coatings posses much higher corrosion resistance as compared to crystalline alloys on the same base

  17. Thermofluency in zirconium alloys

    International Nuclear Information System (INIS)

    A summary is presented about the theoretical and experimental results obtained at present in thermofluency under radiation in zirconium alloys. The phenomenon of thermofluency is presented in a general form, underlining the thermofluency at high temperature because this phenomenon is similar to the thermofluency under radiation, which ocurrs in zirconium alloys into the operating reactor. (author)

  18. High temperature niobium alloys

    International Nuclear Information System (INIS)

    Niobium alloys are currently being used in various high temperature applications such as rocket propulsion, turbine engines and lighting systems. This paper presents an overview of the various commercial niobium alloys, including basic manufacturing processes, properties and applications. Current activities for new applications include powder metallurgy, coating development and fabrication of advanced porous structures for lithium cooled heat pipes

  19. Ultrahigh temperature intermetallic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Brady, M.P.; Zhu, J.H.; Liu, C.T.; Tortorelli, P.F.; Wright, J.L.; Carmichael, C.A.; Walker, L.R. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

    1997-12-01

    A new family of Cr-Cr{sub 2}X based alloys with fabricability, mechanical properties, and oxidation resistance superior to previously developed Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys has been identified. The new alloys can be arc-melted/cast without cracking, and exhibit excellent room temperature and high-temperature tensile strengths. Preliminary evaluation of oxidation behavior at 1100 C in air indicates that the new Cr-Cr{sub 2}X based alloys form an adherent chromia-based scale. Under similar conditions, Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys suffer from extensive scale spallation.

  20. Alloys in energy development

    International Nuclear Information System (INIS)

    The development of new and advanced energy systems often requires the tailoring of new alloys or alloy combinations to meet the novel and often stringent requirements of those systems. Longer life at higher temperatures and stresses in aggressive environments is the most common goal. Alloy theory helps in achieving this goal by suggesting uses of multiphase systems and intermediate phases, where solid solutions were traditionally used. However, the use of materials under non-equilibrium conditions is now quite common - as with rapidly solidified metals - and the application of alloy theory must be modified accordingly. Under certain conditions, as in a reactor core, the rate of approach to equilibrium will be modified; sometimes a quasi-equilibrium is established. Thus an alloy may exhibit enhanced general diffusion at the same time as precipitate particles are being dispersed and solute atoms are being carried to vacancy sinks. We are approaching an understanding of these processes and can begin to model these complex systems

  1. Brazing with plated alloys

    International Nuclear Information System (INIS)

    The use of braze alloy preforms on complex geometry components is at times a very difficult task requiring extensive handling of the parts or even tack welding of the preform to ensure that it is held in place. One method of overcoming these difficulties is the use of plated braze alloys (i.e., filler metals) applied directly to the braze region. Plating helps to avoid the potential for contamination resulting from handling and also ensures that the braze alloy is located properly. Examples are discussed in which an electroplated silver-copper alloy is used as an alternative to the BAg8 preforms and electroless nickel is used as a replacement for an amorphous Ni-P braze alloy foil. A toroidal cooling plate with helical flow channels was fabricated from oxygen-free high conductivity (OFHC) and brazed using the electroplated silver-copper alloy. The silver-copper braze alloy was applied to the copper substrate in a laminated fashion of alternating layers of silver and copper, which in combination approximated the eutectic composition (72% Ag-28% Cu by weight). Examination of the brazed assemblies indicated that in both cases the advantages of using plated braze alloys are numerous. These advantages include decreased labor, improved cleanliness and exactness of braze alloy placement. The primary disadvantage was an increased tendency for solidification defects presumably resulting from contaminants in the plating baths. This last observation is presently being examined in greater detail. The end results is that the assemblies brazed with the plated alloys were acceptable for the intended application and that the use of plating facilitated the successful assembly of these components

  2. Machining of titanium alloys

    CERN Document Server

    2014-01-01

    This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.

  3. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  4. Pareto-optimal alloys

    DEFF Research Database (Denmark)

    Bligaard, Thomas; Johannesson, Gisli Holmar; Ruban, Andrei; Skriver, Hans Lomholt; Jacobsen, Karsten Wedel; Nørskov, Jens Kehlet

    2003-01-01

    cost. In this letter we present a database consisting of the lattice parameters, bulk moduli, and heats of formation for over 64 000 ordered metallic alloys, which has been established by direct first-principles density-functional-theory calculations. Furthermore, we use a concept from economic theory......, the Pareto-optimal set, to determine optimal alloy solutions for the compromise between low compressibility, high stability, and cost....

  5. Texture in low-alloyed uranium alloys

    International Nuclear Information System (INIS)

    The dependence of the preferred orientation of cast and heat-treated polycrystalline adjusted uranium and uranium -0.1 w/o chromium alloys on the production process was studied. The importance of obtaining material free of preferred orientation is explained, and a survey of the regular methods to determine preferred orientation is given. Dilatometry, tensile testing and x-ray diffraction were used to determine the extent of the directionality of these alloys. Data processing showed that these methods are insufficient in a case of a material without any plastic forming, because of unreproducibility of results. Two parameters are defined from the results of Schlz's method diffraction test. These parameters are shown theoretically and experimentally (by extreme-case samples) to give the deviation from isotropy. Application of these parameters to the examined samples showes that cast material has preferred orientation, though it is not systematic. This preferred orientation was reduced by adequate heat treatments

  6. WC-3015 alloy (high-temperature alloy)

    International Nuclear Information System (INIS)

    WC-3015 Nb alloy containing 28 to 30 Hf, 1 to 2 Zr, 13 to 16 W, 0 to 4 Ta, 0 to 5 Ti, 0.07 to 0.33 C, less than or equal to 0.02 N, less than or equal to 0.03 O, less than or equal to 0.001 H was developed for use at high temperature in oxidizing environments. Its composition can be tailored to meet specific requirements. When WC-3015 is exposed to O at elevated temperature, Hf and Nb oxidized preferentially and HfO2 dissolves in Nb2O5 to form 6HfO-Nb2O5. This complex oxide has a tight cubic lattice which resists the diffusion of O into the substrate. During 24-h exposure to air at 24000F, the alloy oxidizes to a depth of approximately 0.035 in. with a surface recession of 0 to 0.004 in. Oxidation resistance of WC-3015 welds and base material can be further enhanced greatly by applying silicide coatings. WC-3015 alloy can be machined by conventional and electrical-discharge methods. It can be hot worked readily by extrusion, forging or rolling. Cold working can be used at room or elevated temperature. It can be welded by the electron-beam or Tig processes. Physical constants, typical mechanical properties at 75 to 24000F, and effects of composition and heat treatment on tensile and stress-rupture properties of the alloy are tabulated

  7. Titanium alloys. Advances in alloys, processes, products and applications

    OpenAIRE

    Blenkinsop, P.

    1993-01-01

    The last few years have been a period of consolidation of existing alloys and processes. While the aerospace industry remains the principal driving force for alloy development, the paper illustrates examples of new markets being established in "older" alloys, by a combination of product/process development and a re-examination of engineering design parameters. Considerable attention is still being directed towards the titanium aluminide systems, but other more conventional alloy developments ...

  8. Correlation between diffusion barriers and alloying energy in binary alloys

    DEFF Research Database (Denmark)

    Vej-Hansen, Ulrik Grønbjerg; Rossmeisl, Jan; Stephens, Ifan; Schiøtz, Jakob

    2016-01-01

    In this paper, we explore the notion that a negative alloying energy may act as a descriptor for long term stability of Pt-alloys as cathode catalysts in low temperature fuel cells.......In this paper, we explore the notion that a negative alloying energy may act as a descriptor for long term stability of Pt-alloys as cathode catalysts in low temperature fuel cells....

  9. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    Directory of Open Access Journals (Sweden)

    Berat Barıs BULDUM

    2013-01-01

    Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

  10. Structural thermodynamics of alloys

    CERN Document Server

    Manenc, Jack

    1973-01-01

    Technical progress has for a very long time been directly dependent on progress in metallurgy, which is itself connected with improvements in the technology of alloys. Metals are most frequently used in the form of alloys for several reasons: the quantity of pure metal in its native state in the earth's crust is very limited; pure metals must be extracted from ores which are themselves impure. Finally, the methods of treatment used lead more easily to alloys than to pure metals. The most typical case is that of iron, where a pure ore may be found, but which is the starting point for cast iron or steel, alloys of iron and carbon. In addition, the properties of alloys are in general superior to those of pure metals and modem metallurgy consists of controlling these properties so as to make them conform to the requirements of the design office. Whilst the engineer was formerly compelled to adapt his designs and constructions to the materials available, such as wood, stone, bronze, iron, cast iron and ordinary st...

  11. INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

    OpenAIRE

    Berat Barıs BULDUM; Aydın SIK; Iskender OZKUL

    2013-01-01

    Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attra...

  12. Productive Machining of Titanium Alloys

    OpenAIRE

    Čejka, Libor

    2013-01-01

    This diploma thesis is focused on a productive machining of titanium alloys. At the beginning it deals about titanium and its alloys. It describes chip generation mechanism, tool blunting and surface quality. Further it contains modern strategies of efficient titanium alloys machining. Then it analyzes contemporary manufacturing technology of hinge made of titanium alloy Ti-6Al-4V in Frentech Aerospace s.r.o. company, and at the end finds possibility of savings by inovation of roughing process.

  13. De-alloyed platinum nanoparticles

    Science.gov (United States)

    Strasser, Peter; Koh, Shirlaine; Mani, Prasanna; Ratndeep, Srivastava

    2011-08-09

    A method of producing de-alloyed nanoparticles. In an embodiment, the method comprises admixing metal precursors, freeze-drying, annealing, and de-alloying the nanoparticles in situ. Further, in an embodiment de-alloyed nanoparticle formed by the method, wherein the nanoparticle further comprises a core-shell arrangement. The nanoparticle is suitable for electrocatalytic processes and devices.

  14. Hydrogen in titanium alloys

    International Nuclear Information System (INIS)

    The titanium alloys that offer properties worthy of consideration for fusion reactors are Ti-6Al-4V, Ti-6Al-2Sn-4Zr-2Mo-Si (Ti-6242S) and Ti-5Al-6Sn-2Zr-1Mo-Si (Ti-5621S). The Ti-6242S and Ti-5621S are being considered because of their high creep resistance at elevated temperatures of 5000C. Also, irradiation tests on these alloys have shown irradiation creep properties comparable to 20% cold worked 316 stainless steel. These alloys would be susceptible to slow strain rate embrittlement if sufficient hydrogen concentrations are obtained. Concentrations greater than 250 to 500 wppm hydrogen and temperatures lower than 100 to 1500C are approximate threshold conditions for detrimental effects on tensile properties. Indications are that at the elevated temperature - low hydrogen pressure conditions of the reactors, there would be negligible hydrogen embrittlement

  15. Welding of refractory alloys

    International Nuclear Information System (INIS)

    This review primarily summarizes welding evaluations supported by NASA-Lewis Research Center in the 1960s. A literature search run in preparation for this review indicates that more recent work is modest by comparison. Hence, this review restates these accomplishments briefly and addresses opportunities which have evolved in welding technology (such as lasers) in the intervening decade. Emphasis in this review is given to tantalum- and niobium-base alloys. Considerable work was also done to assure that a consistent comparison was made with tungsten. A wide variety of candidate alloys derived primarily from developments directed at aircraft propulsion applications were available. Early efforts by NASA were directed at screening studies to select promising structural alloys for the space power application. This objective required fine tuning of welding procedures, e.g., the demonstration of stringent standards for control of welding atmosphere to assure good corrosion resistance in liquid alkali metals. 16 figures, 6 tables

  16. Shape Memory Alloys

    Directory of Open Access Journals (Sweden)

    Deexith Reddy

    2016-07-01

    Full Text Available Shape memory alloys (SMAs are metals that "remember" their original shapes. SMAs are useful for such things as actuators which are materials that "change shape, stiffness, position, natural frequency, and other mechanical characteristics in response to temperature or electromagnetic fields" The potential uses for SMAs especially as actuators have broadened the spectrum of many scientific fields. The study of the history and development of SMAs can provide an insight into a material involved in cutting-edge technology. The diverse applications for these metals have made them increasingly important and visible to the world. This paper presents the working of shape memory alloys , the phenomenon of super-elasticity and applications of these alloys.

  17. Double Glow Plasma Surface Alloyed Burn-resistant Titanium Alloy

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ping-ze; XU Zhong; HE Zhi-yong; ZHANG Gao-hui

    2004-01-01

    Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, we have developed a new kind of burn-resistant titanium alloy-double glow plasma surface alloying burn-resistant titanium alloy. Alloying element Cr, Mo, Cu are induced into the Ti-6Al-4V and Ti-6.5Al-0.3Mo-l.5Zr-0.25Si substrates according to double glow discharge phenomenon, Ti-Cr ,Ti-Mo, Ti-Cu binary burn-resistant alloy layers are formed on the surface of Ti-6Al-4V and Ti-6.5Al-0.3Mo-l.5Zr-0.25Si alloys. The depth of the surface burn-resistant alloy layer can reach to above 200 microns and alloying element concentration can reach 90%.Burn-resistant property experiments reveal that if Cr concentration reach to 14%, Cu concentration reach to 12%, Mo concentration reach to 10% in the alloying layers, ignition and burn of titanium alloy can be effectively avoided.

  18. Double Glow Plasma Surface Alloyed Burn-resistant Titanium Alloy

    Institute of Scientific and Technical Information of China (English)

    ZHANGPing-ze; XUZhong; HEZhi-yong; ZHANGGao-hui

    2004-01-01

    Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, we have developed a new kind of burn-resistant titanium alloy-double glow plasma surface alloying burn-resistant titanium alloy. Alloying element Cr, Mo, Cu are induced into the Ti-6A1-4V and Ti-6.5Al-0.3Mo-1.5Zr-0.25Si substrates according to double glow discharge phenomenon, Ti-Cr ,Ti-Mo, Ti-Cu binary burn-resistant alloy layers are formed on the surface of Ti-6A1-4V and Ti-6.5Al-0.3Mo-1.5Zr-0.25Si alloys. The depth of the surface burn-resistant alloy layer can reach to above 200 microns and alloying element concentration can reach 90%. Burn-resistant property experiments reveal that if Cr concentration reach to 14%, Cu concentration reach to 12%, Mo concentration reach to 10% in the alloying layers, ignition and burn of titanium alloy can be effectively avoided.

  19. Machining of Titanium Alloys

    OpenAIRE

    Karásek, Jan

    2008-01-01

    The main goal of this work is the analysis of manufacturing costs for the component of wheel´s blower. Followed by setting up the size of specific cutting force for milling operation of the titanium alloy Ti-Al6-Mo2-Cr2-Fe-Si, the used tool was a milling cutter which is made out of sintered carbide with conical and spherical face. The final values which are at intervals of 1500 to 1800 MPa were compared with the values of the Sandvik Coromant firm kc = 1690 MPa, for titanium alloy with the st...

  20. Shape memory effect alloys

    International Nuclear Information System (INIS)

    Although the pseudo- or super-elasticity phenomena and the shape memory effect were known since the 1940's, the enormous curiosity and the great interest to their practical applications emerged with the development of the NITINOL alloy (Nickel-Titanium Naval Ordance Laboratory) by the NASA during the 1960's. This fact marked the appearance of a new class of materials, popularly known as shape memory effect alloys (SMEA). The objective of this work is to present a state-of-the-art of the development and applications for the SMEA. (E.O.)

  1. Soldering of aluminium alloys

    International Nuclear Information System (INIS)

    A literature survey about soldering in general and aluminium alloys soldering in particular is presented. The existing methods of soldering aluminium alloys are described. These include soldering with flux, soldering after preliminary plating, vacuum brazipressure and temperature (NTP), sample age calculation based on 14C half life of 5570 and 5730 years, age correction for NTP, dendrochronological corrections and the relative radiocarbon concentration. All results are given with one standard deviation. Input data test (Chauvenet's criterion), gas purity test, standard deviation test and test of the data processor are also included in the program. (author)

  2. Pemilihan Bahan Alloy Untuk Konstruksi Gigitiruan

    OpenAIRE

    Medila Dahlan

    2008-01-01

    Pada kedokteran gigi bahan alloy sangat banyak digunakan dalam segala bidang. Dalam pembuatan konstruksi gigitiman biasanya digunakan alloy emas, alloy kobalt kromium, alloy nikei kromium dan alloy stainless steel sebagai komponen gigitiman kerangka logam serta pembuatan mahkota dan jembatan. Pemilihan bahan alloy dapat dilakukan berdasarkan sifat yang dimiiiki oleh masing-masing bahan alloy sehingga akan didapat hasil konstmksi gigitiruan yang memuaskan. Pada pemakaiannya didaiam mulut...

  3. Hydrogen embrittlement of vanadium alloys

    International Nuclear Information System (INIS)

    The mechanical properties of several vanadium alloys were measured with the hydrogen concentration high up to 113 mg/kg. The results showed that the alloys with low mechanical strength had better properties against hydrogen embrittlement. Oxygen in the alloy, especially that in the alloys with high strength, could enhance the hydrogen embrittlement. Mechanism analysis was given to show that the brittle fracture was mainly caused by intergranular failure. The effects of oxygen concentration and the strength of the alloy were both resulted from their contributions to the grain strength and the grain boundary strength

  4. Galvanic corrosion in odontological alloys

    International Nuclear Information System (INIS)

    Galvanic corrosion can occur when different alloys are placed in direct contact within the oral cavity or within tissues. Concern has been expressed associated with the coupling of selected restorative materials as well as implant material with various alloys used for restorative procedures. This could be critical if the crown or bridge had subgingival finish line with a metallic zone in contact with the tissue, and the implant was made in titanium alloy. The present work shows the results of galvanic coupling studies done on implants of titanium alloy connected to nickel-chromium and cobalt-chromium alloys. (Author)

  5. Ferromagnetic bulk glassy alloys

    International Nuclear Information System (INIS)

    This paper deals with the review on the formation, thermal stability and magnetic properties of the Fe-based bulk glassy alloys in as-cast bulk and melt-spun ribbon forms. A large supercooled liquid region over 50 K before crystallization was obtained in Fe-(Al, Ga)-(P, C, B, Si), Fe-(Cr, Mo, Nb)-(Al, Ga)-(P, C, B) and (Fe, Co, Ni)-Zr-M-B (M=Ti, Hf, V, Nb, Ta, Cr, Mo and W) systems and bulk glassy alloys were produced in a thickness range below 2 mm for the Fe-(Al, Ga)-(P, C, B, Si) system and 6 mm for the Fe-Co-(Zr, Nb, Ta)-(Mo, W)-B system by copper-mold casting. The ring-shaped glassy Fe-(Al, Ga)-(P, C, B, Si) alloys exhibit much better soft magnetic properties as compared with the ring-shaped alloy made from the melt-spun ribbon because of the formation of the unique domain structure. The good combination of high glass-forming ability and good soft magnetic properties indicates the possibility of future development as a new bulk glassy magnetic material

  6. Shape Memory Alloy Actuator

    Science.gov (United States)

    Baumbick, Robert J. (Inventor)

    2002-01-01

    The present invention discloses and teaches a unique, remote optically controlled micro actuator particularly suitable for aerospace vehicle applications wherein hot gas, or in the alternative optical energy, is employed as the medium by which shape memory alloy elements are activated. In gas turbine powered aircraft the source of the hot gas may be the turbine engine compressor or turbine sections.

  7. Alloy catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel alloy catalyst material for use in the synthesis of hydrogen peroxide from oxygen and hydrogen, or from oxygen and water. The present invention also relates to a cathode and an electrochemical cell comprising the novel catalyst material, and the process use...

  8. High strength ferritic alloy

    International Nuclear Information System (INIS)

    A high strength ferritic steel is specified in which the major alloying elements are chromium and molybdenum, with smaller quantities of niobium, vanadium, silicon, manganese and carbon. The maximum swelling is specified for various irradiation conditions. Rupture strength is also specified. (U.K.)

  9. The in-situ Ti alloying of aluminum alloys and its application in A356 alloys

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    This research has investigated the in-situ Ti alloying of aluminum alloys and its application to A356 alloys and wheels through the evaluation of microstructure and mechanical properties, The results showed that stable titanium content can be obtained by adding a small quantity of TiO2 into electrolyte of pure aluminum. Under this approach, a greater than 95% absorptivity of titanium was achieved, and the microstructure of the specimens was changed to fine equiaxed grains from coarse columnar grains in the pure aluminum. In comparison with the tradition A356 alloys and wheels, the corresponding microstructure in the testing A356 alloys and wheels was finer. Although the tensile strength was similar between the testing and the tradition A356 alloys and wheels, the ductility of the former (testing) is superior to that of the later (tradition), leading to an excellent combination of strength and ductility from the testing alloys and wheels.

  10. Advanced ordered intermetallic alloy deployment

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.T.; Maziasz, P.J.; Easton, D.S. [Oak Ridge National Lab., TN (United States)

    1997-04-01

    The need for high-strength, high-temperature, and light-weight materials for structural applications has generated a great deal of interest in ordered intermetallic alloys, particularly in {gamma}-based titanium aluminides {gamma}-based TiAl alloys offer an attractive mix of low density ({approximately}4g/cm{sup 3}), good creep resistance, and high-temperature strength and oxidation resistance. For rotating or high-speed components. TiAl also has a high damping coefficient which minimizes vibrations and noise. These alloys generally contain two phases. {alpha}{sub 2} (DO{sub 19} structure) and {gamma} (L 1{sub 0}), at temperatures below 1120{degrees}C, the euticoid temperature. The mechanical properties of TiAl-based alloys are sensitive to both alloy compositions and microstructure. Depending on heat-treatment and thermomechanical processing, microstructures with near equiaxed {gamma}, a duplex structure (a mix of the {gamma} and {alpha}{sub 2} phases) can be developed in TiAl alloys containing 45 to 50 at. % Al. The major concern for structural use of TiAl alloys is their low ductility and poor fracture resistance at ambient temperatures. The purpose of this project is to improve the fracture toughness of TiAl-based alloys by controlling alloy composition, microstructure and thermomechanical treatment. This work is expected to lead to the development of TiAl alloys with significantly improved fracture toughness and tensile ductility for structural use.

  11. Interphase thermodynamic bond in heterogeneous alloys: effects on alloy properties

    International Nuclear Information System (INIS)

    Inconsistency between a conventional thermodynamic description of alloys as a mechanical mixture of phases and a real alloys state as a common thermodynamic system in which there is a complicated physical-chemical phases interaction has been considered. It is supposed that in heterogeneous alloys (eutectic ones, for instance), so called interphase thermodynamic bond can become apparent due to a partial electron levels splitting under phase interaction. Thermodynamic description of phase equilibrium in alloys is proposed taking into account a thermodynamic bond for the system with phase diagram of eutectic type, and methods of the value of this bond estimation are presented. Experimental evidence (Al-Cu-Si, Al-Si-Mg-Cu, U-Mo + Al) of the effect of interphase thermodynamic bond on temperature and enthalpy of melting of alloys are produced as well as possibility of its effects on alloys electrical conduction, strength, heat and corrosion resistance is substantiated theoretically

  12. High-temperature Titanium Alloys

    Directory of Open Access Journals (Sweden)

    A.K. Gogia

    2005-04-01

    Full Text Available The development of high-temperature titanium alloys has contributed significantly to the spectacular progress in thrust-to-weight ratio of the aero gas turbines. This paper presents anoverview on the development of high-temperature titanium alloys used in aero engines and potential futuristic materials based on titanium aluminides and composites. The role of alloychemistry, processing, and microstructure, in determining the mechanical properties of titanium alloys is discussed. While phase equilibria and microstructural stability consideration haverestricted the use of conventional titanium alloys up to about 600 "C, alloys based on TiPl (or,, E,AINb (0, TiAl (y, and titaniumltitanium aluminides-based composites offer a possibility ofquantum jump in the temperature capability of titanium alloys.

  13. Rare earth ferrosilicon alloy

    International Nuclear Information System (INIS)

    In order to obtain RE ferrosilicon alloy with good quality and competitive price, it is essential that proper choice of raw materials, processing technology and equipments should be made based on the characteristics of Bai-Yun-Ebo mineral deposits. Experimental work and actual production practice indicate that pyrometallurgical method is suitable for the extraction and isolation of the rare earths and comprehensive utilization of the metal values contained in the feed material is capable of reducing cost of production of RE ferrosilicon alloy. In the Bai-Yun-Ebo deposit, the fluorite type medium lean ore (with respect to iron content) makes a reserve of considerable size. The average content of the chief constituents are given

  14. Thermodynamic Database for Zirconium Alloys

    OpenAIRE

    Jerlerud Pérez, Rosa

    2006-01-01

    For many decades zirconium alloys have been commonly used in the nuclear power industry as fuel cladding material. Besides their good corrosion resistance and acceptable mechanical properties the main reason for using these alloys is the low neutron absorption. Zirconium alloys are exposed to a very severe environment during the nuclear fission process and there is a demand for better design of this material. To meet this requirement a thermodynamic database is useful to support material desi...

  15. High-temperature Titanium Alloys

    OpenAIRE

    A.K. Gogia

    2005-01-01

    The development of high-temperature titanium alloys has contributed significantly to the spectacular progress in thrust-to-weight ratio of the aero gas turbines. This paper presents anoverview on the development of high-temperature titanium alloys used in aero engines and potential futuristic materials based on titanium aluminides and composites. The role of alloychemistry, processing, and microstructure, in determining the mechanical properties of titanium alloys is discussed. While phase eq...

  16. Structure of ordered alloys

    International Nuclear Information System (INIS)

    Recent progress in studying ordered alloys by lattice fringe imaging is reviewed. Firstly the optimum experimental conditions for producing images suitable for interpretation are outlined. Secondly lattice and conventional imaging are compared and the advantages of the former for obtaining atomic level detail and compositional estimates are described. Finally some important results from this program are discussed, particularly the evidence for a microdomain model of short-range order and the fine structure of various ordered lattice defects

  17. Oligocrystalline shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ueland, Stian M.; Chen, Ying; Schuh, Christopher A. [Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 (United States)

    2012-05-23

    Copper-based shape memory alloys (SMAs) exhibit excellent shape memory properties in single crystalline form. However, when they are polycrystalline, their shape memory properties are severely compromised by brittle fracture arising from transformation strain incompatibility at grain boundaries and triple junctions. Oligocrystalline shape memory alloys (oSMAs) are microstructurally designed SMA structures in which the total surface area exceeds the total grain boundary area, and triple junctions can even be completely absent. Here it is shown how an oligocrystalline structure provides a means of achieving single crystal-like SMA properties without being limited by constraints of single crystal processing. Additionally, the formation of oSMAs typically involves the reduction of the size scale of specimens, and sample size effects begin to emerge. Recent findings on a size effect on the martensitic transformation in oSMAs are compared and a new regime of heat transfer associated with the transformation heat evolution in these alloys is discussed. New results on unassisted two-way shape memory and the effect of loading rate in oSMAs are also reported. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Aluminum alloy impact sparkling

    Directory of Open Access Journals (Sweden)

    M. Dudyk

    2008-08-01

    Full Text Available The cast machine parts are widely used in many branches of industry. A very important issue is gaining the appropriate knowledge relating to the application of castings in places of explosion risks including but not limited to mining, chemical industry and rescue works. A possibility of explosion risks occurrence following the impact sparkling of the cast metal parts is still not solved problem in scientific research. In relation to this issue, in this article, the results of the study are presented, and relating to the tendency to impact sparkling of the aluminium alloys used in machine building. On the grounds of the results obtained, it was demonstrated that the registered impact sparkles bunches of feathers from the analyzed alloys: AlSi7Mg, (AK7; AlSi9Mg, (AK9; AlSi6Cu4, (AK64 and AlSi11, (AK11 show significant differences between each other. The quantitative analysis of the temperature distribution and nuclei surface area performed on the example of the alloy AK9 (subjected to defined period of corrosion allows for the statement that they are dangerous in conditions of explosion risk. Following this fact, designers and users of machine parts made from these materials should not use them in conditions where the explosive mixtures occur.

  19. Amorphous yttrium-iron alloys

    International Nuclear Information System (INIS)

    The magnetic properties of amorphous yttrium-iron alloys Ysub(1-x)Fesub(x) have been studied over a wide concentration range 0.32 2Fe17 alloys, lead in the amorphous state to spin-glass behaviour and asperomagnetic order. The dominant positive interactions produce short-range ferromagnetic correlations which persist up to room temperature. However magnetic saturation cannot be achieved for any of the alloys in applied fields of up to 180 kOe, indicating that strong negative interactions are also present. Exchange interactions become increasingly positive with increasing x, and the magnetic properties of iron-rich alloys approach those of a normal ferromagnet. (author)

  20. Titanium and titanium alloy forgings

    International Nuclear Information System (INIS)

    The specification covers nine grades of annealed titanium and titanium alloy forgings as follows: Grade F-1, F-2, F-3, and F-4 unalloyed titanium; Grade F-5 titanium alloy (6% aluminum, 4% vanadium); Grade F-6 titanium alloy (5% aluminum, 2.5% tin); Grade F-7 and F-11 unalloyed titanium plus palladium; Grade F-12 titanium alloy (0.3% molybdenum, 0.8% nickel). The specification includes ordering information, manufacture, chemical requirements, mechanical requirements, nondestructive tests, dimensions and permissible variations, finish, certification, packaging, and marking

  1. Electron Theory in Alloy Design

    CERN Document Server

    Pettifor, DG

    1992-01-01

    Presents recent developments in electron theory which have impacted upon the search for novel alloys with improved mechanical or magnetic properties. The ten chapters outline the ability of electron theory to make quantitative predictions (such as heats of formation, planar fault energies, shear moduli and magnetic anisotropy), and to provide simplifying concepts for understanding trends in alloy behaviour.

  2. Mo-Si alloy development

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.T.; Heatherly, L.; Wright, J.L. [Oak Ridge National Lab., TN (United States)

    1996-06-01

    The objective of this task is to develop new-generation corrosion-resistant Mo-Si intermetallic alloys as hot components in advanced fossil energy conversion and combustion systems. The initial effort is devoted to Mo{sub 5}-Si{sub 3}-base (MSB) alloys containing boron additions. Three MSB alloys based on Mo-10.5Si-1.1B (wt %), weighing 1500 g were prepared by hot pressing of elemental and alloy powders at temperatures to 1600{degrees}C in vacuum. Microporosities and glassy-phase (probably silicate phases) formations are identified as the major concerns for preparation of MSB alloys by powder metallurgy. Suggestions are made to alleviate the problems of material processing.

  3. Glass formation in eutectic alloys

    International Nuclear Information System (INIS)

    We have analyzed the glass forming ability around eutectic composition in terms of the competitive growth/formation of primary dendrites, eutectic and glass. It is concluded that the glass forming ability of a eutectic alloy system depends on the type of the eutectics, i.e. symmetric or asymmetric eutectic coupled zone. For the alloy systems with symmetric eutectic coupled zone, the best glass forming alloys should be at or very close to the eutectic composition. For the alloys with asymmetric eutectic coupled zone, which is associated with the irregular eutectic, the best glass forming alloys should be at off-eutectic compositions, probably towards the side of the faceted phase with a high entropy in the phase diagram. (orig.)

  4. Alloyed pleasures: Multimetallic cocktails

    OpenAIRE

    Ranganathan, S

    2003-01-01

    The English language insists on unalloyed pleasures, thereby implying that the sensation of pleasure must be pure and not admixed with other emotions. Exactly the opposite rules in metallurgy, where pure metals have few uses and can always be improved upon by alloying. It is true that the civilizational journey of mankind began with the discovery of native metals such as gold and copper as pure metals. In fact this love at first sight of gold several millennia ago has persisted till this day ...

  5. Heating uranium alloy billets

    International Nuclear Information System (INIS)

    Data were obtained for the surface heat transfer coefficient of uranium and the alloys of uranium-0.75 wt percent titanium, uranium-6 wt percent niobium, and uranium-7.5 wt percent niobium-2.5 wt percent zirconium. Samples were heated to 8500C in both a molten salt bath and an argon-purged air furnace, then the samples were cooled in air. Surface heat transfer coefficients were calculated from the experimental data for both heating and cooling of the metals. 4 fig, 4 tables

  6. Corrosion of aluminum alloys as a function of alloy composition

    International Nuclear Information System (INIS)

    A study was initiated which included nineteen aluminum alloys. Tests were conducted in high purity water at 3600C and flow tests (approx. 20 ft/sec) in reactor process water at 1300C (TF-18 loop tests). High-silicon alloys and AlSi failed completely in the 3600C tests. However, coupling of AlSi to 8001 aluminum suppressed the failure. The alloy compositions containing iron and nickel survived tht 3600C autoclave exposures. Corrosion rates varied widely as a function of alloy composition, but in directions which were predictable from previous high-temperature autoclave experience. In the TF-18 loop flow tests, corrosion penetrations were similar on all of the alloys and on high-purity aluminum after 105 days. However, certain alloys established relatively low linear corrosion rates: Al-0.9 Ni-0.5 Fe-0.1 Zr, Al-1.0 Ni-0.15 Fe-11.5 Si-0.8 Mg, Al-1.2 Ni-1.8 Fe, and Al-7.0 Ni-4.8 Fe. Electrical polarity measurements between AlSi and 8001 alloys in reactor process water at temperatures up to 1500C indicated that AlSi was anodic to 8001 in the static autoclave system above approx. 500C

  7. Stable palladium alloys for diffusion of hydrogen

    Science.gov (United States)

    Patapoff, M.

    1973-01-01

    Literature search on hydrogen absorption effect on palladium alloys revealed existence of alloy compositions in which alpha--beta transition does not take place. Survey conclusions: 40 percent gold alloy of palladium should be used in place of palladium; alloy must be free of interstitial impurities; and metallic surfaces of tube must be clean.

  8. [Prosthetic dental alloys. 1].

    Science.gov (United States)

    Quintero Engelmbright, M A

    1990-11-01

    A wide variety of restoration materials for prosthetic odontology is now available to the dental surgeon, either of the covalent type (acrylic resins), metallic (alloys), ionic (porcelains), or a combination of them, as in the so-called composites, such as the composite resins, or as ceramics-metals mixtures. An example of the latter is a product called Miracle-Mix, a glass ionomere cement reinforced with an amalgam alloy. In those cases where the blend is done by a synterization process, the material is called Cermet. The above-listed alternatives clearly evidence day-to-day advances in odontology, with researchers and manufacturers engaged the world over in improving existing products or developing new ones to enrich the dentist's armamentarium. As a side effect of this constant renewal, those dentists who have failed to update their knowledge fall behind in their practice as they persist in using products they have known for years, and may be deceived by advertisements of too-often unreliable products. It is, therefore, important to be aware of available products and their latest improvements. PMID:2132464

  9. [Prosthetic dental alloys (2)].

    Science.gov (United States)

    Quintero Englembright, M A

    1990-12-01

    A wide variety of restoration materials for prosthetic odontology is now available to the dental surgeon, either of the covalent type (acrylic resins), metallic (alloys), ionic (porcelains), or a combination of them, as in the so-called composites, such as the composite resins, or as ceramics-metals mixtures. An example of the latter is a product called Miracle-Mix, a glass ionomere cement reinforced with an amalgam alloy. In those cases where the blend is done by a synterization process, the material is called Cermet. The above-listed alternatives clearly evidence day-to-day advances in odontology, with researchers and manufacturers engaged the world over in improving existing products or developing new ones to enrich the dentist's armamentarium. As a side effect of this constant renewal, those dentists who have failed to update their knowledge fall behind in their practice as they persist in using products they have known for years, and may be deceived by advertisements of too-often unreliable products. It is, therefore, important to be aware of available products and their latest improvements. PMID:2132470

  10. Oxidation resistant alloys, method for producing oxidation resistant alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dunning, John S.; Alman, David E.

    2002-11-05

    A method for producing oxidation-resistant austenitic alloys for use at temperatures below 800 C. comprising of: providing an alloy comprising, by weight %: 14-18% chromium, 15-18% nickel, 1-3% manganese, 1-2% molybdenum, 2-4% silicon, 0% aluminum and the balance being iron; heating the alloy to 800 C. for between 175-250 hours prior to use in order to form a continuous silicon oxide film and another oxide film. The method provides a means of producing stainless steels with superior oxidation resistance at temperatures above 700 C. at a low cost

  11. Mechanical alloying of aluminium-lithium-magnesium alloy powders

    International Nuclear Information System (INIS)

    The production of high-purity aluminium-lithium-magnesium alloy powders, by mechanical alloying through grinding in a vibratory mill under high vacuum at room temperature, is described in details. The source materials for the grinding mixture were: aluminium-lithium alloy powder obtained by thermal vacuum-dehydrogenization of AlLiH4 hydride; magnesium metal powder; and chemically deoxidized aluminium metal powder. The implications which arose from the high reactivity of the component elements are discussed, and the measures taken to overcome them are described. The procedures used for the chemical analysis and powder characterization are given. (orig.)

  12. Density of Liquid Ni-Cr Alloy

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The density of liquid Ni-Cr alloy was measured by a modified sessile drop method. The density of liquid Ni-Cr alloywas found to decrease with increasing temperature and Cr concentration in the alloy. The molar volume of liquidNi-Cr alloy increases with increasing the Cr concentration in the alloy. The molar volume of Ni-Cr alloy determinedin the present work shows a positive deviation from the linear molar volume.

  13. Improvement factors for steam generator tubing alloys

    International Nuclear Information System (INIS)

    Predictions of reliability gains associated with the use of advanced alloys have been made in the past through the use of improvement factors. Improvement factors for thermally treated Alloy 600 (Alloy 600TT) and thermally treated Alloy 690 (Alloy 690TT) steam generator tubing were previously developed and have been used in the most recent revision of the EPRI Secondary Water Chemistry Guidelines. However, due to the long expected failure times relative to field experience, field-experience-based estimates of these improvement factors continue to be overly conservative (as shown by the absence of wide spread in-service cracking of these materials). A recent study updated the previously developed improvement factors associated with the use of advanced alloys. This paper will discuss the development of relative improvement factors for Alloy 600TT, Alloy 690TT, and Alloy 800 nuclear grade (Alloy 800NG) with respect to mill annealed Alloy 600 (Alloy 600MA) steam generator tubing. The various uses which are appropriate for these improvement factors will be discussed. This presentation focuses on primary side tube degradation (PWSCC), although this project also addressed secondary side tube degradation (ODSCC). The following four techniques were used to assess the performance of the Alloy 600TT, Alloy 690TT, and Alloy 800NG relative to that of Alloy 600MA: Field data on tube degradation were evaluated using statistical techniques, based on plant population Weibull/Weibayes analyses, similar to those employed in the past and reviewed by industry experts as part of the EPRI guidelines revision process. This paper presents updated improvement factors based on further accumulation of operating experience with Alloy 600TT, Alloy 800NG, and Alloy 690TT; Field data on tube degradation were evaluated using alternative statistical techniques which are not as overly conservative as those used in the past; Field data on tube plug cracking were evaluated to compare the performance

  14. Characterization of copper base alloys obtained by mechanical alloying

    International Nuclear Information System (INIS)

    The micro and nano structure of mechanical alloys of Cu-Al, Cu-V and Cu-Ti obtained by reactive milling, using an Attritor mill, was analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and transmission electron microscope (TEM). In order to study the evolution of the alloys during the manufacturing process and during the period of service, the DSC and XRD were done before the mechanical milling, after 30 hours of milling and after hot extrusion of the alloyed powders. Using the Williamson-Hall and Klug-Alexander methods the size of the crystallites and the density of the dislocations in the prepared alloys were evaluated. In all the milled powder cases, the grain and crystallite size was found to be nanometric, the dispersoids were also nanometric and there was texture in the copper planes (220), in the cases of the milled Cu- Ti and Cu-V powders (au)

  15. Alloying and Casting Furnace for Shape Memory Alloys Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The concept in the proposed project is to create a melting, alloying and casting furnace for the processing titanium based SMA using cold crucible techniques. The...

  16. Laser surface alloying of aluminium-transition metal alloys

    Directory of Open Access Journals (Sweden)

    Almeida, A.

    1998-04-01

    Full Text Available Laser surface alloying has been used as a tool to produce hard and corrosion resistant Al-transition metal (TM alloys. Cr and Mo are particularly interesting alloying elements to produce stable highstrength alloys because they present low diffusion coefficients and solid solubility in Al. To produce Al-TM surface alloys a two-step laser process was developed: firstly, the material is alloyed using low scanning speed and secondly, the microstructure is modified by a refinement step. This process was used in the production of Al-Cr, Al-Mo and Al-Nb surface alloys by alloying Cr, Mo or Nb powder into an Al and 7175 Al alloy substrate using a CO2 laser. This paper presents a review of the work that has been developed at Instituto Superior Tecnico on laser alloying of Al-TM alloys, over the last years.

    En el presente trabajo se estudia la aleación superficial mediante láser de aluminio con metales de transición. El cromo y el molibdeno son particularmente interesantes porque producen aleaciones de alta resistencia y por el bajo coeficiente de difusión y solución sólida en aluminio. Para producir estas aleaciones se ha seguido un procedimiento desarrollado en dos partes. En primer lugar, el material se alea usando una baja velocidad de procesado y en segundo lugar la estructura se modifica mediante un refinamiento posterior. Este procedimiento se ha empleado en la producción de aleaciones Al-Cr, Al-Mo y Al-Nb mediante aleación con láser de CO2 de polvos de Cr, Mo o Nb en aluminio y la aleación 7175. Este trabajo es una revisión del desarrollado en el Instituto Superior Técnico de Lisboa en los últimos años.

  17. Dislocation Formation in Alloys

    Science.gov (United States)

    Minami, Akihiko; Onuki, Akira

    2006-05-01

    An interaction between dislocations and phase transitions is studied by a phase field model both in two and three dimensional systems. Our theory is a simple extension of the traditional linear elastic theory, and the elastic energy is a periodic function of local strains which is reflecting the periodicity of crystals. We find that the dislocations are spontaneously formed by quenching. Dislocations are formed from the interface of binary alloys, and slips are preferentially gliding into the soft metals. In three dimensional systems, formation of dislocations under applied strain is studied in two phase state. We find that the dislocation loops are created from the surface of hard metals. We also studied the phase separation above the coexisting temperature which is called as the Cottrell atmosphere. Clouds of metals cannot catch up with the motion of dislocations at highly strained state.

  18. Emissivity measurements on aeronautical alloys

    Energy Technology Data Exchange (ETDEWEB)

    Campo, L. del, E-mail: leire.del-campo@cnrs-orleans.f [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Perez-Saez, R.B., E-mail: raul.perez@ehu.e [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain); Gonzalez-Fernandez, L. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Esquisabel, X.; Fernandez, I. [Industria de Turbo Propulsores, S.A., Planta de Zamudio, Edificio 300, 48170 Zamudio, Bizkaia (Spain); Gonzalez-Martin, P. [Industria de Turbo Propulsores, S.A., Parque empresarial San Fernando, Avda. Castilla 2, 28830 San Fernando de Henares, Madrid (Spain); Tello, M.J. [Departamento de Fisica de la Materia Condensada, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco, Barrio Sarriena s/n, 48940 Leioa, Bizkaia (Spain); Instituto de Sintesis y Estudio de Materiales, Universidad del Pais Vasco, Apdo. 644, 48080 Bilbao (Spain)

    2010-01-21

    The emissivity of three Ni and Co based aeronautical alloys is analyzed in this paper. These alloys are employed in high temperature environments whenever good corrosion resistance, high temperature resistance and high strength are essential. Thus, apart from the aeronautical industry, these alloys are also used in other technological applications, as for example, aerospace, nuclear reactors, and tooling. The results in this paper extend the emissivity data for these alloys available in the literature. Emissivity dependence on the radiation wavelength (2-22 {mu}m), sample temperature (200-650 {sup o}C) and emission angle (0-85{sup o}) has been investigated. In addition, the effect of surface finish and oxidation has also been taken into consideration. The data in this paper have several applications, as temperature measurement of a target by pyrometry, low observability of airplanes and thermal radiation heat transfer simulation in airplane nozzles or furnaces.

  19. Auger electron spectroscopy of alloys

    International Nuclear Information System (INIS)

    This thesis describes how the surface compositions of some alloys can be determined by Auger Electron Spectroscopy (AES). The motivation for this research and the reasons for the choice of alloy systems studied are formulated. The theoretical background of AES is briefly discussed and the apparatus used and the experimental procedures applied are described. Four alloy systems have been investigated in this thesis - Ni-Cu and Pd - Ag (consisting of a component active in most cataytic reactions - Ni and Pd; and a component which is almost inactive for a number of reactions - Cu and Ag) and Pt - Pd and Pt-Ir (consisting of two active components). Knowledge of the surface composition of the various alloy systems is shown to be essential for the interpretation of catalytic results. (Auth./C.F.)

  20. Uranium-Based Cermet Alloys

    International Nuclear Information System (INIS)

    The paper describes certain features of dispersion-hardened uranium-based cermets. As possible hardening materials, consideration was given to UO2, UC, Al2O3, MgO and UBe13. Data were obtained on the behaviour of uranium alloys containing the above-mentioned admixtures during creep tests, short-term strength tests and cyclic thermal treatment. The corrosion resistance o f UBe13-based uranium alloys was also studied. )author)

  1. Friction surfacing of aluminium alloys

    OpenAIRE

    Pereira, Diogo Jorge O. A.

    2012-01-01

    Friction surfacing is a solid state joining process that has attracted much interest in the past decades. This technology allows joining dissimilar metallic materials while avoiding the brittle intermetallic formations, involving temperatures bellow melting point and producing like forged metal structures. Much research using different steels has been made but the same does not happen with aluminium alloys, specially using different aluminium alloys. Friction surface coatings using cons...

  2. TEM microstructure investigations of aluminium alloys used for laser alloying

    Directory of Open Access Journals (Sweden)

    K. Labisz

    2012-12-01

    Full Text Available Purpose: In this paper there are presented results of Transmission Electron Microscope investigation concerning the structure of the AlSi7Cu4 cast aluminium alloy using for alloying and remelting with the high power diode laser (HPDL. There are also presented the results of the thermo-derivative analysis performed using the UMSA (Universal Metallurgical Simulator and Analyser device, allowing to determine the specific points of the solidifying alloy, what is helpful for phase determination occurred in this alloy. In this work especially the changes of the precipitation type, size and shape were determined.Design/methodology/approach: The investigations were performed using electron microscopy for the microstructure and phases determination. By mind of the transmission electron microscopy, especially selected area diffraction method appliance it was possible to determine the phases occurred in the alloy in the as cast state. The morphology and size of the Mg2Si was also possible to determine as well the lattice parameters for this phase.Findings: : The reason of this work was also to present the laser treatment technology, which will be used for further alloying and remelting with ceramic powders – especially carbides and oxides. Particularly the overview will be directed on the laser power to achieve good layer hardness for protection of this hot work tool steel from losing their work stability and to make the tool surface more resistant to action in external conditions. The structure of the surface laser tray changes in a way, that there are very high roughness of the surface zone and the flatness or geometry changes in an important manner, crucial for further investigation.Research limitations/implications: The aluminium samples were examined metallographically using transmission electron microscope with different image techniques.Practical implications: Developing of new technology with appliance of Al alloys, High Power Diode Laser and

  3. Microstructural studies on Alloy 693

    Energy Technology Data Exchange (ETDEWEB)

    Halder, R.; Dutta, R.S. [Materials Science Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India); Sengupta, P., E-mail: praneshsengupta@gmail.com [Materials Science Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India); Samajdar, I. [Dept. of Metall. Engg. and Mater. Sci., Indian Institute of Technology Bombay, Mumbai 400 072 (India); Dey, G.K. [Materials Science Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India)

    2014-10-15

    Superalloy 693, is a newly identified ‘high-temperature corrosion resistant alloy’. Present study focuses on microstructure and mechanical properties of the alloy prepared by double ‘vacuum melting’ route. In general, the alloy contains ordered Ni{sub 3}Al precipitates distributed within austenitic matrix. M{sub 6}C primary carbide, M{sub 23}C{sub 6} type secondary carbide and NbC particles are also found to be present. Heat treatment of the alloy at 1373 K for 30 min followed by water quenching (WQ) brings about a microstructure that is free from secondary carbides and Ni{sub 3}Al type precipitates but contains primary carbides. Tensile property of Alloy 693 materials was measured with as received and solution annealed (1323 K, 60 min, WQ) and (1373 K, 30 min, WQ) conditions. Yield strength, ultimate tensile strength (UTS) and hardness of the alloy are found to drop with annealing. It is noted that in annealed condition, considerable cold working of the alloy can be performed.

  4. Corrosion Behaviour of New Zr Alloys

    DEFF Research Database (Denmark)

    Tolksdorf, E.

    1974-01-01

    Corrosion studies have indicated that the most promising replacements for Zicaloy-2 are ZrCrFe, ZrVFe and probably ZrNbTa, provided they are in their optimized condition. These alloys are conventionally manufactured alloys. An internally oxidized ZrMgO alloy is even superior, from the corrosion a...... hydrogen uptake points of view, to the above-mentioned alloys. This alloy is of particular interest because the addition of MgO leads to no neutron penalty and the dispersion-strengthening entails the possibility of tailoring an alloy with the desired mechanical properties....

  5. Compensative alloying of Cr-Si low-alloyed steels

    International Nuclear Information System (INIS)

    The principle of choosing alloy elements in order to suppress the embrittlement of solid solution strengthening is proposed. In the case of Cr-Si low-alloyed steels, the effects of compensative alloying are studied. The ultimate tensile strength and impact toughness of Cr-Si steels microalloyed with Mo, V, and Ti are determined to prove the aspects. The structure of these steels is studied using optical and transmission electron microscopy techniques after applying the optimum heat treatment. The kinetics of phase transformation after quenching and tempering have been examined by means of measurements of specific electrical resistance and magnetic parameters. It is shown that at the Si-content of about 1 wt% high values of tensile strength and impact toughness are simultaneously obtained. It is established by calculations that, for the indicated steel, long-range distortions of the crystal lattice become close to zero at the Si-content of about 1 wt%.

  6. Shape memory alloys. Ultralow-fatigue shape memory alloy films.

    Science.gov (United States)

    Chluba, Christoph; Ge, Wenwei; Lima de Miranda, Rodrigo; Strobel, Julian; Kienle, Lorenz; Quandt, Eckhard; Wuttig, Manfred

    2015-05-29

    Functional shape memory alloys need to operate reversibly and repeatedly. Quantitative measures of reversibility include the relative volume change of the participating phases and compatibility matrices for twinning. But no similar argument is known for repeatability. This is especially crucial for many future applications, such as artificial heart valves or elastocaloric cooling, in which more than 10 million transformation cycles will be required. We report on the discovery of an ultralow-fatigue shape memory alloy film system based on TiNiCu that allows at least 10 million transformation cycles. We found that these films contain Ti2Cu precipitates embedded in the base alloy that serve as sentinels to ensure complete and reproducible transformation in the course of each memory cycle. PMID:26023135

  7. Machining of high alloy steels and heat resistant alloys

    International Nuclear Information System (INIS)

    The peculiarities of machining high alloy steels and heat resistant alloys on the base of nickel by cutting are described. The factors worsening the machining of heat resistant materials, namely, the low heat conductivity, strong reverting and high wearing capability, are pointed out. The resign and materials of cutting instruments, providing for high quality machining of heat resistant steels and alloys, are considered. The necessity of regulating thermal processes during cutting with cutting fluids and other coolants (e.g. air with a negative temperature) is noted. The recommended modes of cutting are presented. The efficiency of the conveyer-type method for sawing products and forged intermediate articles is demonstrated by the example of 5KhNM steel

  8. The comparison of corrosion resistance between Baosteel's alloy 690 tube and foreign alloy 690 tube

    International Nuclear Information System (INIS)

    Alloy 690 having excellent corrosion resistance is widely used for SG tubes. The intergranular corrosion and pitting corrosion resistance of Baosteel's alloy 690 tube, Country A alloy 690 tube and Country B alloy 690 tube have been analysed by comparison. It shows that: The intergranular corrosion of Baosteel's alloy 690 tube tested complied with ASTM G28 Standard could satisfy the technical requirement. However.some of Baosteel's alloy 690 tube in intergranular corrosion resistance had less performance than Country A. In addition, pitting corrosion tested with ASTM G48 Standard shown the Baosteel's alloy 690 tube better than Country B. (authors)

  9. Laser cladding of titanium alloy coating on titanium aluminide alloy substrate

    Institute of Scientific and Technical Information of China (English)

    徐子文; 黄正; 阮中健

    2003-01-01

    A new diffusion bonding technique combined with laser cladding process was developed to join TiAl alloy to itself and Ti-alloys. In order to enhance the weldability of TiAl alloys, Ti-alloy coatings were fabricated by laser cladding on the TiAl alloy. Ti powder and shaped Ti-alloy were respectively used as laser cladding materials. The materials characterization was carried out by OM, SEM, EDS and XRD analysis. The results show that the laser cladding process with shaped Ti-alloy remedy the problems present in the conventional process with powder, such as impurities, cracks and pores. The diffusion bonding of TiAl alloy with Ti-alloy coating to itself and Ti-alloy was carried out with a Gleeble 1500 thermal simulator. The sound bonds of TiAl/TiAl, TiAl/Ti were obtained at a lower temperature and with shorter time.

  10. Carbon Alloys-Multi-functionalization

    Energy Technology Data Exchange (ETDEWEB)

    Yasuda, Eiichi [MSL, Tokyo Institute of Technology, Yokohama 226-8503 (Japan)], E-mail: yasuda.e.aa.@m.titech.ac.jp; Enami, Takashi; Hoteida, Nobuyuki [MSL, Tokyo Institute of Technology, Yokohama 226-8503 (Japan); Lanticse-Diaz, L.J. [University of the Philippines (Philippines); Tanabe, Yasuhiro [Nagoya University (Japan); Akatsu, Takashi [MSL, Tokyo Institute of Technology, Yokohama 226-8503 (Japan)

    2008-02-25

    Last decade after our proposal of the 'Carbon Alloys' concept, many different kinds of Carbon Alloys, such as carbon nanotubes, carbon nanofibers, graphene sheet with magnetism, semi-conducting BCN compounds, graphite intercalation compounds, exfoliated carbon fiber, etc. have been found and developed. To extend the concept further, it is important to make it into intelligent materials by incorporating multiple functions. One example of the multi-functionalization is the development of homo-atomic Carbon Alloys from glassy carbon (GC) that exhibits high electrical conductivity and low gas permeability after treatment at critical conditions. Glassy carbon underwent metamorphosis to graphite spheres at HIP condition, and improved resistance to oxidation after alloying with Ta. The other one is shape utilization of the nano-sized carbon by understanding the effect of its large surfaces or interfaces in nanotechnology treatment. Recently carbon nanofiber was produced by polymer blend technology (PB) which was proposed by Prof. A. Oya during the Carbon Alloy project and progressed into intelligent carbon nanofiber (CNF) materials. CNF is combined into the polymer composites which is a candidate material for the bipolar separator in fuel cell. The superior properties, i.e., high electrical conductivity, high modulus, high strength, etc., of the CNF is being utilized in the preparation of this polymer composite.

  11. Quasicrystal-reinforced Mg alloys

    International Nuclear Information System (INIS)

    The formation of the icosahedral phase (I-phase) as a secondary solidification phase in Mg–Zn–Y and Mg–Zn–Al base systems provides useful advantages in designing high performance wrought magnesium alloys. The strengthening in two-phase composites (I-phase + α-Mg) can be explained by dispersion hardening due to the presence of I-phase particles and by the strong bonding property at the I-phase/matrix interface. The presence of an additional secondary solidification phase can further enhance formability and mechanical properties. In Mg–Zn–Y alloys, the co-presence of I and Ca2Mg6Zn3 phases by addition of Ca can significantly enhance formability, while in Mg–Zn–Al alloys, the co-presence of the I-phase and Mg2Sn phase leads to the enhancement of mechanical properties. Dynamic and static recrystallization are significantly accelerated by addition of Ca in Mg–Zn–Y alloy, resulting in much smaller grain size and more random texture. The high strength of Mg–Zn–Al–Sn alloys is attributed to the presence of finely distributed Mg2Sn and I-phase particles embedded in the α-Mg matrix. (review)

  12. Design optimization of shape memory alloy structures

    OpenAIRE

    Langelaar, M.

    2006-01-01

    This thesis explores the possibilities of design optimization techniques for designing shape memory alloy structures. Shape memory alloys are materials which, after deformation, can recover their initial shape when heated. This effect can be used for actuation. Emerging applications for shape memory alloys are e.g. miniaturized medical instruments with embedded actuation, as well as microsystem components. However, designing effective shape memory alloy structures is a challenging task, due t...

  13. Grain refinement efficiency of a new oxide-containing master alloy for aluminium casting alloys

    OpenAIRE

    Sreekumar, VM; Babu, NH; Eskin, DG; Fan, ZY

    2014-01-01

    In this study, grain refinement efficiency of a new oxide master alloy based on MgAl2O4 was demonstrated on an A357 alloy. The grain size of the reference alloy was reduced by 50-60% with the addition of the master alloy and introduction of ultrasonic cavitation. A higher addition of master alloy was found to be not benificial in further reducing the grain size.

  14. Improved thermal treatment of aluminum alloy 7075

    Science.gov (United States)

    Cocks, F. H.

    1968-01-01

    Newly developed tempering treatment considerably increases the corrosion resistance of 7075-T6 alloy and concomitantly preserves its yield strength. The results of tests on samples of the alloy subjected to the above treatments show that when the overaging period is 12 hours /at 325 degrees F/, the alloy exhibits a yield strength of 73,000 psi.

  15. Materials data handbook, aluminum alloy 6061

    Science.gov (United States)

    Sessler, J.; Weiss, V.

    1969-01-01

    Comprehensive compilation of technical data on aluminum alloy 6061 is presented in handbook form. The text includes data on the properties of the alloy at cryogenic, ambient, and elevated temperatures and other pertinent information required for the design and fabrication of components and equipment utilizing this alloy.

  16. Filler metal development for hastelloy alloy XR

    International Nuclear Information System (INIS)

    A method of alloy designing has been proposed and validated to develop the filler metal for Hastelloy alloy XR(nuclear reactor grade of Hastelloy alloy X), which is the candidate material for high temperature structure of High-Temperature Engineering Test Reactor (HTTR). In the filler metal development for Hastelloy alloy XR, materials of two heats were melted and fabricated with special emphasis placed on manufacturing process. One is the trial products (alloy termed 'C') designed by using multiple regression analysis in the range of the chemical composition specified as Hastelloy alloy X. The other is filler metal (alloy termed 'D') with optimum boron content in the same chemical composition as Hastelloy alloy XR. The results of the tests on several key items may be summarized as follows: (1) Weldments with alloy'C' showed higher strength and ductility at elevated temperatures than those of alloy'D'. (2) Weldments with alloy'D' had more excellent strength characteristics at elevated temperatures than those of the other conventional filler metals. (3) As for weldability, the crater cracks were slightly observed in the FISCO cracking test, but those were out of the problem in the degree of cracking from the viewpoint of practical application. The results of qualification tests on weldability showed good performance for all welding conditions of the present experiments. On the other hand, the mechanism of hot cracking initiation and the controlling factors in hot cracking susceptibility with relation to boron content have been clarified for Hastelloy alloy XR base metal. (author)

  17. Magnesium and related low alloys

    International Nuclear Information System (INIS)

    In the first part the authors examine the comparative corrosion of commercial magnesium, of a magnesium-zirconium alloy (0,4 per cent ≤ Zr ≤ 0,7 per cent) of a ternary magnesium-zinc-zirconium alloy (0,8 per cent ≤ Zn ≤ 1,2 per cent) and of english 'Magnox type' alloys, in dry carbon dioxide-free air, in damp carbon dioxide-free air, and in dry and damp carbon dioxide, at temperatures from 300 to 600 deg. C. In the second part the structural stability of these materials is studied after annealings, of 10 to 1000 hours at 300 to 450 deg. C. Variations in grain after these heat treatments and mechanical stretching properties at room temperature are presented. Finally various creep rate and life time diagrams are given for these materials, for temperatures ranging from 300 to 450 deg. C. (author)

  18. Alloy phase stability and design

    International Nuclear Information System (INIS)

    At the level of basic quantum theory the papers in this symposium reflect the great progress that has been made in understanding the physical properties of both ordered and disordered alloys based on Density Functional Theory (DFT). DFT provides a quantitative parameter-free (often referred to as first principles) theory of the ground state properties of these systems. This general approach has also been used in combination with classical elasticity and dislocation theory to provide the first quantitative understanding of some of the mechanical properties of intermetallic alloys. Recent advances have built on DFT theory to provide the first glimpses of a theory of the finite temperature phase stability of alloys. It is the strength of these first principles theories that the understanding of materials properties is in terms of the underlying electronic structure. At the level of atomistic simulation, based on semi-empirical potentials, again much progress has been made in understanding the properties of extended defects such as grain boundaries and dislocations. On the experimental front increasingly sophisticated tools are being brought to bear in order to understand both the underlying electronic structure and detailed atomic arrangements. This information, together with input from theory, is playing an increasing role in guiding alloy design efforts. At the more practical level a number of these sophisticated alloy design efforts have in recent years produced impressive results across a broad front. The properties of existing materials are continually being improved and new ones developed. Often this progress is based on a deeper understanding of the properties at the atomistic and electronic level. The design of new ordered intermetallic alloys that have reached or are reaching commercialization represents one of the major achievements of this investment of intellectual resources

  19. Moving Dislocations in Disordered Alloys.

    Energy Technology Data Exchange (ETDEWEB)

    Marian, J; Caro, A

    2006-11-18

    Using atomistic simulations of dislocation motion in Ni and Ni-Au alloys we report a detailed study of the mobility function as a function of stress, temperature and alloy composition. We analyze the results in terms of analytic models of phonon radiation and their selection rules for phonon excitation. We find a remarkable agreement between the location of the cusps in the {sigma}-v relation and the velocity of waves propagating in the direction of dislocation motion. We identify and characterize three regimes of dissipation whose boundaries are essentially determined by the direction of motion of the dislocation, rather than by its screw or edge character.

  20. [Microbiological corrosion of aluminum alloys].

    Science.gov (United States)

    Smirnov, V F; Belov, D V; Sokolova, T N; Kuzina, O V; Kartashov, V R

    2008-01-01

    Biological corrosion of ADO quality aluminum and aluminum-based construction materials (alloys V65, D16, and D16T) was studied. Thirteen microscopic fungus species and six bacterial species proved to be able to attack aluminum and its alloys. It was found that biocorrosion of metals by microscopic fungi and bacteria was mediated by certain exometabolites. Experiments on biocorrosion of the materials by the microscopic fungus Alternaria alternata, the most active biodegrader, demonstrated that the micromycete attack started with the appearance of exudate with pH 8-9 on end faces of the samples. PMID:18669265

  1. Hydrogen effects in aluminum alloys

    International Nuclear Information System (INIS)

    The permeability of six commercial aluminum alloys to deuterium and tritium was determined by several techniques. Surface films inhibited permeation under most conditions; however, contact with lithium deuteride during the tests minimized the surface effects. Under these conditions phi/sub D2/ = 1.9 x 10-2 exp (--22,400/RT) cc (NTP)atm/sup --1/2/ s-1cm-1. The six alloys were also tested before, during, and after exposure to high pressure hydrogen, and no hydrogen-induced effects on the tensile properties were observed

  2. Imparting passivity to vapor deposited magnesium alloys

    Science.gov (United States)

    Wolfe, Ryan C.

    Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

  3. Current research situation of titanium alloys in China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Titanium and its alloys possess excellent comprehensive properties, and they are widely used in many fields. China pays great attentions to the research on new titanium alloys. This paper mainly reviews the research on new Ti alloys in China, for example, high strength and high toughness Ti alloys, burn resistant Tialloys, high temperature Ti alloys, low cost Ti alloys and so on.New basic theories on Ti alloys developed in China in recent years are also reviewed.

  4. An introduction to surface alloying of metals

    CERN Document Server

    Hosmani, Santosh S; Goyal, Rajendra Kumar

    2014-01-01

    An Introduction to Surface Alloying of Metals aims to serve as a primer to the basic aspects of surface alloying of metals. The book serves to elucidate fundamentals of surface modification and their engineering applications. The book starts with basics of surface alloying and goes on to cover key surface alloying methods, such as carburizing, nitriding, chromizing, duplex treatment, and the characterization of surface layers. The book will prove useful to students at both the undergraduate and graduate levels, as also to researchers and practitioners looking for a quick introduction to surface alloying.

  5. Theory of Random Anisotropic Magnetic Alloys

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker

    1976-01-01

    A mean-field-crystal-field theory is developed for random, multicomponent, anisotropic magnetic alloys. It is specially applicable to rare-earth alloys. A discussion is given of multicritical points and phase transitions between various states characterized by order parameters with different....... Quantitative agreement can be obtained by increasing the interaction between different alloy elements, in particular for alloys with very different axial anisotropy, e.g., Tb-Tm. A model system consisting of a singlet-singlet and singlet-doublet alloy is discussed in detail. A simple procedure to include...

  6. Surface Tension Calculation of Undercooled Alloys

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Based on the Butler equation and extrapolated thermodynamic data of undercooled alloys from those of liquid stable alloys, a method for surface tension calculation of undercooled alloys is proposed. The surface tensions of liquid stable and undercooled Ni-Cu (xNi=0.42) and Ni-Fe (xNi=0.3 and 0.7) alloys are calculated using STCBE (Surface Tension Calculation based on Butler Equation) program. The agreement between calculated values and experimental data is good enough, and the temperature dependence of the surface tension can be reasonable down to 150-200 K under the liquid temperature of the alloys.

  7. Investigating aluminum alloy reinforced by graphene nanoflakes

    Energy Technology Data Exchange (ETDEWEB)

    Yan, S.J., E-mail: shaojiuyan@126.com [Beijing Institute of Aeronautical Materials, Beijing 100095 (China); Dai, S.L.; Zhang, X.Y.; Yang, C.; Hong, Q.H.; Chen, J.Z. [Beijing Institute of Aeronautical Materials, Beijing 100095 (China); Lin, Z.M. [Aviation Industry Corporation of China, Beijing 100022 (China)

    2014-08-26

    As one of the most important engineering materials, aluminum alloys have been widely applied in many fields. However, the requirement of enhancing their mechanical properties without sacrificing the ductility is always a challenge in the development of aluminum alloys. Thanks to the excellent physical and mechanical properties, graphene nanoflakes (GNFs) have been applied as promising reinforcing elements in various engineering materials, including polymers and ceramics. However, the investigation of GNFs as reinforcement phase in metals or alloys, especially in aluminum alloys, is still very limited. In this study, the aluminum alloy reinforced by GNFs was successfully prepared via powder metallurgy approach. The GNFs were mixed with aluminum alloy powders through ball milling and followed by hot isostatic pressing. The green body was then hot extruded to obtain the final GNFs reinforced aluminum alloy nanocomposite. The scanning electron microscopy and transmission electron microscope analysis show that GNFs were well dispersed in the aluminum alloy matrix and no chemical reactions were observed at the interfaces between the GNFs and aluminum alloy matrix. The mechanical properties' testing results show that with increasing filling content of GNFs, both tensile and yield strengths were remarkably increased without losing the ductility performance. These results not only provided a pathway to achieve the goal of preparing high strength aluminum alloys with excellent ductilitybut they also shed light on the development of other metal alloys reinforced by GNFs.

  8. Investigating aluminum alloy reinforced by graphene nanoflakes

    International Nuclear Information System (INIS)

    As one of the most important engineering materials, aluminum alloys have been widely applied in many fields. However, the requirement of enhancing their mechanical properties without sacrificing the ductility is always a challenge in the development of aluminum alloys. Thanks to the excellent physical and mechanical properties, graphene nanoflakes (GNFs) have been applied as promising reinforcing elements in various engineering materials, including polymers and ceramics. However, the investigation of GNFs as reinforcement phase in metals or alloys, especially in aluminum alloys, is still very limited. In this study, the aluminum alloy reinforced by GNFs was successfully prepared via powder metallurgy approach. The GNFs were mixed with aluminum alloy powders through ball milling and followed by hot isostatic pressing. The green body was then hot extruded to obtain the final GNFs reinforced aluminum alloy nanocomposite. The scanning electron microscopy and transmission electron microscope analysis show that GNFs were well dispersed in the aluminum alloy matrix and no chemical reactions were observed at the interfaces between the GNFs and aluminum alloy matrix. The mechanical properties' testing results show that with increasing filling content of GNFs, both tensile and yield strengths were remarkably increased without losing the ductility performance. These results not only provided a pathway to achieve the goal of preparing high strength aluminum alloys with excellent ductilitybut they also shed light on the development of other metal alloys reinforced by GNFs

  9. Passive Corrosion Behavior of Alloy 22

    International Nuclear Information System (INIS)

    Alloy 22 (NO6022) was designed to stand the most aggressive industrial applications, including both reducing and oxidizing acids. Even in the most aggressive environments, if the temperature is lower than 150 F (66 C) Alloy 22 would remain in the passive state having particularly low corrosion rates. In multi-ionic solutions that may simulate the behavior of concentrated ground water, even at near boiling temperatures, the corrosion rate of Alloy 22 is only a few nano-meters per year because the alloy is in the complete passive state. The corrosion rate of passive Alloy 22 decreases as the time increases. Immersion corrosion testing also show that the newer generation of Ni-Cr-Mo alloys may offer a better corrosion resistance than Alloy 22 only in some highly aggressive conditions such as in hot acids

  10. Applications of shape memory alloys in Japan

    International Nuclear Information System (INIS)

    In Japan, a first application of shape memory TiNi alloy was a moving flap in an air-conditioner which was developed as sensing function of shape memory alloy at Matsushista Electric Industrial Co. Then, shape memory utilized in a coffee maker, an electric rice-cooker, a thermal mixing valve and etc. were commercialized in Japan. And brassiere wires, a guide wire for medical treatment, an antenna for portable telephone and others were commercialized utilizing superelasticity. At the same time with these commercial products, there was not only progress in fabrication technology to effect accurate transformation temperature, but also the discovery of small hysteresis alloy such as R-phase or TiNiCu alloy and low transformation temperature alloy such as TiNiFe, TiNiV and TiNiCo alloys. Therefore the shape memory alloy market has expanded widely to electric appliances, automobile, residence, medical care and other field today. (orig.)

  11. High Damping Alloys and Their Application

    Institute of Scientific and Technical Information of China (English)

    Fuxing Yin

    2000-01-01

    Damping alloys show prospective applications in the elimination of unwanted vibrations and acoustic noise. The basic definitions and characterization methods of damping capacity are reviewed in this paper. Several physical mechanisms controlled by the alloy microstructure are responsible for the damping behavior in the damping alloys. Composite, dislocation, ferromagnetic and planar defect types are commonly classified for the alloys, which show the different damping behavior against temperature, frequency of vibration,amplitude of vibration and damping modes. Development of practically applicable damping alloys requires the higher mechanical properties and adequate workability, besides the high damping capacity. A new Mn-Cu damping alloy, named as M2052 alloy, is recently developed with possible industrial applications.

  12. Corrosion behavior of Alloy 690 and Alloy 693 in simulated nuclear high level waste medium

    Energy Technology Data Exchange (ETDEWEB)

    Samantaroy, Pradeep Kumar; Suresh, Girija; Paul, Ranita [Corrosion Science and Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Kamachi Mudali, U., E-mail: kamachi@igcar.gov.in [Corrosion Science and Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Raj, Baldev [Corrosion Science and Technology Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India)

    2011-11-15

    Highlights: > Alloy 690 and Alloy 693, both possess good corrosion resistance in simulated HLW. > SEM and EDS confirms the presence of Cr rich precipitates for both the alloys. > Passive film stability of Alloy 690 was found to be higher than Alloy 693. > Both alloys possess few micro pits even at a concentration of 100 ppm Cl{sup -} ion. - Abstract: Nickel based alloys are candidate materials for the storage of high level waste (HLW) generated from reprocessing of spent nuclear fuel. In the present investigation Alloy 690 and Alloy 693 are assessed by potentiodynamic anodic polarization technique for their corrosion behavior in 3 M HNO{sub 3}, 3 M HNO{sub 3} containing simulated HLW and in chloride medium. Both the alloys were found to possess good corrosion resistance in both the media at ambient condition. Microstructural examination was carried out by SEM for both the alloys after electrolytic etching. Compositional analysis of the passive film formed on the alloys in 3 M HNO{sub 3} and 3 M HNO{sub 3} with HLW was carried out by XPS. The surface of Alloy 690 and Alloy 693, both consists of a thin layer of oxide of Ni, Cr, and Fe under passivation in both the media. The results of investigation are presented in the paper.

  13. Influence of silica on stress corrosion cracking of Alloy 600 and Alloy 690

    International Nuclear Information System (INIS)

    Silicate is a major constituent of sludge on the tubesheet region of PWR steam generators, where stress corrosion cracking (SCC) of the steam generator tubing generally occurs in nuclear power plants. In this work, the effects of silicate on SCC of Alloy 600 and Alloy 690 have been studied in 10 % NaOH and 40 % NaOH with and without 2 g/l SiO2 at 315 degC. The experiments were performed using C-ring specimens at 200 mV above the corrosion potential. The stress at the apex of the C-ring specimen ranged from about 300 MPa to about 600 MPa. Polarization behaviors of Alloy 600 and Alloy 690 were also studied. High temperature mill annealed Alloy 600, sensitized Alloy 600, thermally treated Alloy 600 and thermally treated Alloy 690 were used for the SCC and polarization test. Composition profiles of the deposit layer on Alloy 600 and Alloy 690 were examined with an Auger electron microscope. The degree of sensitization was evaluated with a modified Huey test and TEM-EDX. Effects of silica on SCC of Alloy 600 and Alloy 690 are discussed in terms of polarization behavior and the oxide layer composition. (author) Key Words: stress corrosion cracking, Alloy 600, Alloy 690, polarization curves, AES, TEM, NaOH, silica

  14. Gold color in dental alloys.

    Science.gov (United States)

    Cameron, T

    1997-01-01

    This article will help the dental laboratory with alloy selection by exploring how the relationship among color, ductility and strength applies to gold and how color can be quantified. Because higher quality materials translate into higher profits, upselling to the dentist and patient is also discussed. PMID:9524484

  15. Creep of Mg-alloys

    Czech Academy of Sciences Publication Activity Database

    Blum, W.; Eisenlohr, P.; Zeng, X. H.; Milička, Karel

    Montreal: Canadian Institute of Mining, Metallurgy and Petroleum, 2006 - (Pekguleryuz, M.; Mackenzie, L.), s. 633-645 ISBN 1-894475-66-6. [Magnesium Technology in the Global Age. Montreal (CA), 01.10.2006-04.10.2006] Institutional research plan: CEZ:AV0Z20410507 Keywords : creep * magnesium alloys * creep mechanisms Subject RIV: BM - Solid Matter Physics ; Magnetism

  16. Introduction to hydrogen in alloys

    International Nuclear Information System (INIS)

    Substitutional alloys, both those that form hydrides and those that do not, are discussed, but with more emphasis on the former than the latter. This overview includes the following closely related subjects: (1) the significant effects of substitutional solutes on the pressure-composition-temperature (PCT) equilibria of metal-hydrogen systems, (2) the changes in thermodynamic properties resulting from differences in atom size and from modifications of electronic structure, (3) attractive and repulsive interactions between H and solute atoms and the effects of such interactions on the pressure dependent solubility for H, (4) H trapping in alloys of Group V metals and its effect on the terminal solubility for H (TSH), (5) some other mechanisms invoked to explain the enhancement (due to alloying) of the (TSH) in Group V metals, and (6) H-impurity complexes in alloys of the metals Ni, Co, and Fe. Some results showing that an enhanced TSH may ameliorate the resistance of a metal to hydrogen embrittlement are presented

  17. Fiber reinforced titanium alloy composites

    International Nuclear Information System (INIS)

    The more important titanium matrix composites studied to date are composed of titanium alloy matrices, such as Ti 6Al--4V, reinforced with filaments of boron, silicon carbide, or sapphire, as well as with wires of beryllium or refractory metal alloys. The primary fabrication techniques for these materials involve vacuum hot pressing at 1300 to 16000F, alternate layers of titanium alloy matrix foils, and suitably aligned filament mats. The more ductile reinforcements such as beryllium, have been incorporated into titanium matrix composites by coextrusion. Fabrication of composite gas turbine engine fan blades from both boron (SiC coated) and beryllium reinforced Ti 6Al--4V alloy is described. Feasibility studies have been made in the fabrication of Boron/Ti 6Al--4V composite rings for possible gas turbine engine disc applications. Mechanical properties of various titanium matrix composite systems are presented and demonstrate the attractive elevated temperature properties of some systems to 10000F. (35 fig, 6 tables) (U.S.)

  18. Introduction to hydrogen in alloys

    Energy Technology Data Exchange (ETDEWEB)

    Westlake, D.G.

    1980-01-01

    Substitutional alloys, both those that form hydrides and those that do not, are discussed, but with more emphasis on the former than the latter. This overview includes the following closely related subjects: (1) the significant effects of substitutional solutes on the pressure-composition-temperature (PCT) equilibria of metal-hydrogen systems, (2) the changes in thermodynamic properties resulting from differences in atom size and from modifications of electronic structure, (3) attractive and repulsive interactions between H and solute atoms and the effects of such interactions on the pressure dependent solubility for H, (4) H trapping in alloys of Group V metals and its effect on the terminal solubility for H (TSH), (5) some other mechanisms invoked to explain the enhancement (due to alloying) of the (TSH) in Group V metals, and (6) H-impurity complexes in alloys of the metals Ni, Co, and Fe. Some results showing that an enhanced TSH may ameliorate the resistance of a metal to hydrogen embrittlement are presented.

  19. Water atomised aluminium alloy powders

    Energy Technology Data Exchange (ETDEWEB)

    Neikov, O.D.; Vasilieva, G.I.; Sameljuk, A.V.; Krajnikov, A.V

    2004-10-10

    The new rapid solidification (RS) process based on high-pressure water atomisation (WA) of the melt for manufacturing of advanced aluminium alloys was realised in the form of a pilot plant. The problems of safe operation in the course of Al alloy powder production and powder quality were solved by the use of water solutions of inhibitors, by the control of suspension temperature and hydrogen ion exponent (pH), by the hydraulic classification of atomised products, and by the optimisation of dehydration procedure. The rate of powder-water interaction strongly depends on the value of pH. While the rate of room temperature reactions is very slow at pH 3.0-4.0, the increase of pH to 6.0 leads to an intensive powder oxidation. A set of powder metallurgy (PM) alloys for various applications was produced on the base of water atomised powders. The characteristics of tensile strength of such alloys essentially exceed those of cast materials of similar compositions.

  20. Water atomised aluminium alloy powders

    International Nuclear Information System (INIS)

    The new rapid solidification (RS) process based on high-pressure water atomisation (WA) of the melt for manufacturing of advanced aluminium alloys was realised in the form of a pilot plant. The problems of safe operation in the course of Al alloy powder production and powder quality were solved by the use of water solutions of inhibitors, by the control of suspension temperature and hydrogen ion exponent (pH), by the hydraulic classification of atomised products, and by the optimisation of dehydration procedure. The rate of powder-water interaction strongly depends on the value of pH. While the rate of room temperature reactions is very slow at pH 3.0-4.0, the increase of pH to 6.0 leads to an intensive powder oxidation. A set of powder metallurgy (PM) alloys for various applications was produced on the base of water atomised powders. The characteristics of tensile strength of such alloys essentially exceed those of cast materials of similar compositions

  1. Potentiodynamic study of Zn + 0.5% Al alloy alloyed by thallium

    International Nuclear Information System (INIS)

    Present article is devoted to potentiodynamic study of Zn + 0.5% Al alloy alloyed by thallium. The studies results of potentiodynamic study of Zn + 0.5% Al alloy alloyed by thallium in the medium of NaCl electrolyte were considered. The influence of thallium additives on corrosion-electrochemical properties of Zn + 0.5% Al alloy in the medium of NaCl electrolyte of different concentration was studied. Based on carried out researches it was defined that thallium additives have a positive influence of corrosion-electrochemical behaviour of Zn + 0.5% Al alloy.

  2. Nickel-base alloys combat corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, D.C. [VDM Technologies Corp., Houston, TX (United States); Herda, W. [Krupp-VDM GmbH, Werdohl (Germany)

    1995-06-01

    The modern chemical process industry must increase production efficiency to remain competitive. Manufacturers typically meet this challenge by utilizing higher temperatures and pressures, and more-corrosive catalysts. At the same time, the industry has to solve the technical and commercial problems resulting from rigid environmental regulations. To overcome these obstacles, new alloys having higher levels of corrosion resistance have been developed. These materials are based on increased understanding of the physical metallurgy of nickel-base alloys, especially the role of alloying elements. Results of many studies have led to innovations in nickel-chromium-molybdenum alloys containing both high and low amounts of nickel. Higher molybdenum and chromium contents, together with nitrogen additions, have opened up an entirely new class of alloys having unique properties. In addition, a new chromium-base, fully wrought super stainless steel shows excellent promise in solving many corrosion problems. These newer alloys have the ability to combat uniform corrosion, localized corrosion, and stress-corrosion cracking in the harsh halogenic environment of the chemical process industry. This article briefly lists some of the major highlights and corrosion data on recent nickel-chromium-molybdenum and nickel-molybdenum alloys, and the development of a chromium-base, wrought super-austenitic alloy known as Nicrofer 3033 (Alloy 33). Some comparisons with existing alloys are presented, along with a few commercial applications.

  3. Alloy substantially free of dendrites and method of forming the same

    Science.gov (United States)

    de Figueredo, Anacleto M.; Apelian, Diran; Findon, Matt M.; Saddock, Nicholas

    2009-04-07

    Described herein are alloys substantially free of dendrites. A method includes forming an alloy substantially free of dendrites. A superheated alloy is cooled to form a nucleated alloy. The temperature of the nucleated alloy is controlled to prevent the nuclei from melting. The nucleated alloy is mixed to distribute the nuclei throughout the alloy. The nucleated alloy is cooled with nuclei distributed throughout.

  4. First principles theory of disordered alloys and alloy phase stability

    Energy Technology Data Exchange (ETDEWEB)

    Stocks, G.M.; Nicholson, D.M.C.; Shelton, W.A. [and others

    1993-06-05

    These lecture notes review the LDA-KKR-CPA method for treating the electronic structure and energetics of random alloys and the MF-CF and GPM theories of ordering and phase stability built on the LDA- KKR-CPA description of the disordered phase. Section 2 lays out the basic LDA-KKR-CPA theory of random alloys and some applications. Section 3 reviews the progress made in understanding specific ordering phenomena in binary solid solutions base on the MF-CF and GPM theories of ordering and phase stability. Examples are Fermi surface nesting, band filling, off diagonal randomness, charge transfer, size difference or local strain fluctuations, magnetic effects; in each case, an attempt is made to link the ordering and the underlying electronic structure of the disordered phase. Section 4 reviews calculations of electronic structure of {beta}-phase Ni{sub c}Al{sub 1-c} alloys using a version of the LDA-KKR-CPA codes generalized to complex lattices.

  5. Preparation of TiMn alloy by mechanical alloying and spark plasma sintering for biomedical applications

    Science.gov (United States)

    Zhang, F.; Weidmann, A.; Nebe, B. J.; Burkel, E.

    2009-01-01

    TiMn alloy was prepared by mechanical alloying and subsequently consolidated by spark plasma sintering (SPS) technique for exploration of biomedical applications. The microstructures, mechanical properties and cytotoxicity of the TiMn alloys were investigated in comparison with the pure Ti and Mn metals. Ti8Mn and Ti12Mn alloys with high relative density (99%) were prepared by mechanical alloying for 60 h and SPS at 700 °C for 5 min. The doping of Mn in Ti has decreased the transformation temperature from α to β phase, increased the relative density and enhanced the hardness of the Ti metal significantly. The Ti8Mn alloys showed 86% cell viability which was comparable to that of the pure Ti (93%). The Mn can be used as a good alloying element for biomedical Ti metal, and the Ti8Mn alloy could have a potential use as bone substitutes and dental implants.

  6. Progress in ODS Alloys: A Synopsis of a 2010 Workshop on Fe- Based ODS Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kad, Bimal [University of California, San Diego; Dryepondt, Sebastien N [ORNL; Jones, Andy R. [University of Liverpool; Vito, Cedro III [National Energy Technology Laboratory (NETL); Tatlock, Gordon J [ORNL; Pint, Bruce A [ORNL; Tortorelli, Peter F [ORNL; Rawls, Patricia A. [National Energy Technology Laboratory (NETL)

    2012-01-01

    In Fall 2010, a workshop on the role and future of Fe-based Oxide Dispersion Strengthened (ODS) alloys gathered together ODS alloy suppliers, potential industrial end-users, and technical experts in relevant areas. Presentations and discussions focused on the current state of development of these alloys, their availability from commercial suppliers, past major evaluations of ODS alloy components in fossil and nuclear energy applications, and the technical and economic issues attendant to commercial use of ODS alloys. Significant progress has been achieved in joining ODS alloys, with creep resistant joints successfully made by inertia welding, friction stir welding and plasma-assisted pulse diffusion bonding, and in improving models for the prediction of lifetime components. New powder and alloy fabrication methods to lower cost or improve endproduct properties were also described. The final open discussion centered on challenges and pathways for further development and large-scale use of ODS alloys.

  7. Alloying effect on the titanium alloys tendency to the salt corrosion

    International Nuclear Information System (INIS)

    Salt corrosion tendency of commercial titanium alloys, such as OT4, 0T4-1 (the Ti-Al-Mn system); VT14, VT16 (the Ti-Al-Mo-V system) and VT30 (the Ti-Mo-Sn-Zr system) is compared with the intensity of salt corrosion of VT1-0 titanium and experimental alloys of the Ti-Al and Ti-Mo systems. It is established that the salt corrosion tendency of alloys of the Ti-Al system increases when they are alloyed with manganese and decreases when they are alloyed with vanadium and molybdenum in combination. Alloys of the Ti-Mo system have no tendency to salt corrosion. Alloying with zirconium and tin brings about the propagation of salt corrosion in the alloys

  8. New Dental Alloys with Special Consumer Properties

    Institute of Scientific and Technical Information of China (English)

    TYKOCHINSKIY D. S.; VASEKIN V. V.

    2012-01-01

    The purpose of the investigation was to create a new gold alloy of yellow for casting the frames of metal-ceramic dentures.The yellow color corresponds to the consumer and aesthetic needs of some patients,because it is a sign of the metal,which is noble and innocuous.The main alloying elements of the majority of gold alloys for metal-ceramics are platinum and palladium,which increase the strength characteristics.Copper,tin,and other precious metals and base metals are also introduced in these alloys.At the same time,it is necessary to ensure the correspondence of the properties of the alloy with those of the ceramics applied onto the metal frame.For this purpose,the thermal expansion coefficient of the alloy (TEC) should be in a range of 13.5~14.5 × 10-6 K-1 when heated from 20 to 600 ℃.The two-component alloys,alloying of gold with platinum and palladium results in a decrease in the TEC,and the introduction of copper,silver,and tin,increases it.Multidirectional influence of the alloying elements is a factor in achieving compliance of the TEC with the given values of the alloy.In multicomponent systems,however,the mutual influence of individual components on the properties of the alloy is unpredictable.This also applies to the color characteristics of the alloys,which vary in the direction of reducing the yellowness with increasing concentration of platinum and palladium,while other elements may have the opposite effect on the results.Yellowness index (YI),calculated according to the results of spectrophotometric studies,has been chosen as an objective indicator of color.In this study,the requirement for YI was given not less than 25; the color of such alloys can be called light yellow.All the alloys investigated contained 85% (by weight)of gold.Therefore,higher corrosion resistance and biological inertness of a finished dental products were ensured.Among the alloys that met the yellowness/TEC requirements,two alloys have been selected that were "most yellow

  9. Effects of segregation of primary alloying elements on the creep response in magnesium alloys

    DEFF Research Database (Denmark)

    Huang, Y.D.; Dieringa, H.; Hort, N.; Leil, T.A.; Kainer, K.U.; Liu, Yi-Lin

    2008-01-01

    The segregation of primary alloying elements deteriorates the high temperature creep resistance of magnesium alloys. Annealing at high temperatures alleviating their segregations can improve the creep resistance. Present investigation on the effect of segregation of primary alloying elements on the...... creep response may provide some useful information about how to improve the creep resistance of magnesium alloys in the future. (c) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved....

  10. Corrosion resistance of titanium alloys for dentistry

    International Nuclear Information System (INIS)

    Titanium and its alloys belong to biomaterials which the application scope in medicine increases. Some properties of the alloys, such as high mechanical strength, low density, low Young's modulus, high corrosion resistance and good biotolerance decide about it. The main areas of the application of titanium and its alloys are: orthopedics and traumatology, cardiosurgery, faciomaxillary surgery and dentistry. The results of investigations concerning the corrosion resistance of the technical titanium and Ti6Al14V alloy and comparatively a cobalt alloy of the Vitallium type in the artificial saliva is presented in the work. Significantly better corrosion resistance of titanium and the Ti6Al14V than the Co-Cr-Mo alloy was found. (author)

  11. A lightweight shape-memory magnesium alloy

    Science.gov (United States)

    Ogawa, Yukiko; Ando, Daisuke; Sutou, Yuji; Koike, Junichi

    2016-07-01

    Shape-memory alloys (SMAs), which display shape recovery upon heating, as well as superelasticity, offer many technological advantages in various applications. Those distinctive behaviors have been observed in many polycrystalline alloy systems such as nickel titantium (TiNi)–, copper-, iron-, nickel-, cobalt-, and Ti-based alloys but not in lightweight alloys such as magnesium (Mg) and aluminum alloys. Here we present a Mg SMA showing superelasticity of 4.4% at –150°C and shape recovery upon heating. The shape-memory properties are caused by reversible martensitic transformation. This Mg alloy includes lightweight scandium, and its density is about 2 grams per cubic centimeter, which is one-third less than that of practical TiNi SMAs. This finding raises the potential for development and application of lightweight SMAs across a number of industries.

  12. Bulk amorphous Mg-based alloys

    DEFF Research Database (Denmark)

    Pryds, Nini

    The present paper describes the preparation and properties of bulk amorphous quarternary Mg-based alloys and the influence of additional elements on the ability of the alloy to form bulk amorphous. The main goal is to find a Mg-based alloy system which shows both high strength to weight ratio and a...... low glass transition temperature. The alloys were prepared by using a relatively simple technique, i.e. rapid cooling of the melt in a copper wedge mould. The essential structural changes that are achieved by going from the amorphous to the crystalline state through the supercooled liquid state are...... discussed in this paper. On the basis of these measurements phase diagrams of the different systems were constructed. Finally, it is demonstrated that when pressing the bulk amorphous alloy onto a metallic dies at temperatures within the supercooled liquid region, the alloy faithfully replicates the surface...

  13. Bonding theory for metals and alloys

    CERN Document Server

    Wang, Frederick E

    2005-01-01

    Bonding Theory for Metals and Alloys exhorts the potential existence of covalent bonding in metals and alloys. Through the recognition of the covalent bond in coexistence with the 'free' electron band, the book describes and demonstrates how the many experimental observations on metals and alloys can all be reconciled. Subsequently, it shows how the individual view of metals and alloys by physicists, chemists and metallurgists can be unified. The physical phenomena of metals and alloys covered in this book are: Miscibility Gap between two liquid metals; Phase Equilibrium Diagrams; Phenomenon of Melting. Superconductivity; Nitinol; A Metal-Alloy with Memory; Mechanical Properties; Liquid Metal Embrittlement; Superplasticity; Corrosion; The author introduces a new theory based on 'Covalon' conduction, which forms the basis for a new approach to the theory of superconductivity. This new approach not only explains the many observations made on the phenomenon of superconductivity but also makes predictions that ha...

  14. Constitution and magnetism of iron and its alloys

    International Nuclear Information System (INIS)

    The following topics are covered: structure of iron, magnetism of iron, thermal properties (heat capacity and enthalpy), substitutional alloys of iron, interstitial Fe alloys and compounds, influence of magnetism on the physical properties of Fe alloys (WL)

  15. Copper and nickel adherently electroplated on titanium alloy

    Science.gov (United States)

    Brown, E. E.

    1967-01-01

    Anodic treatment of titanium alloy enables electroplating of tightly adherent coatings of copper and nickel on the alloy. The alloy is treated in a solution of hydrofluoric and acetic acids, followed by the electroplating process.

  16. [Microbial corrosion of dental alloy].

    Science.gov (United States)

    Li, Lele; Liu, Li

    2004-10-01

    There is a very complicated electrolytical environment in oral cavity with plenty of microorganisms existing there. Various forms of corrosion would develop when metallic prosthesis functions in mouth. One important corrosive form is microbial corrosion. The metabolic products, including organic acid and inorganic acid, will affect the pH of the surface or interface of metallic prosthesis and make a change in composition of the medium, thus influencing the electron-chemical reaction and promoting the development of corrosion. The problem of develpoment of microbial corrosion on dental alloy in the oral environment lies in the primary condition that the bacteria adhere to the surface of alloy and form a relatively independent environment that promotes corrosion. PMID:15553877

  17. Advanced powder metallurgy aluminum alloys and composites

    Science.gov (United States)

    Lisagor, W. B.; Stein, B. A.

    1982-01-01

    The differences between powder and ingot metallurgy processing of aluminum alloys are outlined. The potential payoff in the use of advanced powder metallurgy (PM) aluminum alloys in future transport aircraft is indicated. The national program to bring this technology to commercial fruition and the NASA Langley Research Center role in this program are briefly outlined. Some initial results of research in 2000-series PM alloys and composites that highlight the property improvements possible are given.

  18. Surface Bond Strength in Nickel Based Alloys

    OpenAIRE

    Ramesh, Ganesh; Padmanabhan, T. V.; Ariga, Padma; Joshi, Shalini; Bhuminathan, S.; Vijayaraghavan, Vasantha

    2012-01-01

    Bonding of ceramic to the alloy is essential for the longevity of porcelain fused to metal restorations. Imported alloys used now a days in processing them are not economical. So this study was conducted to evaluate and compare the bond strength of ceramic material to nickel based cost effective Nonferrous Materials Technology Development Center (NFTDC), Hyderabad and Heraenium S, Heraeus Kulzer alloy. An Instron testing machine, which has three-point loading system for the application of loa...

  19. Microstructure and Slip Character in Titanium Alloys

    OpenAIRE

    Banerjee, D.; Williams, J. C.

    1986-01-01

    Influence of microstructures in titanium alloys on the basic parameters of deformation behaviour such as slip character, slip length and slip intensity have been explored. Commercial titanium alloys contain the hexagonal close packed (alpha) and body centred cubic (bita) phases. Slip in these individual phases is shown to be dependent on the nature of alloying elements through their effect on phase stability as related to decomposition into ordered or w structures. When alpha and bita coexist...

  20. A bidirectional shape memory alloy folding actuator

    OpenAIRE

    Paik, Jamie; Wood, Robert J.

    2012-01-01

    This paper presents a low-profile bidirectional folding actuator based on annealed shape memory alloy sheets applicable for meso-and microscale systems. Despite the advantages of shape memory alloys-high strain, silent operation, and mechanical simplicity-their application is often limited to unidirectional operation. We present a bidirectional folding actuator that produces two opposing 180 degrees motions. A laser-patterned nickel alloy (Inconel 600) heater localizes actuation to the foldin...

  1. Aluminium-lithium alloys with scandium

    International Nuclear Information System (INIS)

    The influence of scandium on phase composition and properties of Al-Li alloys is considered. It is shown that the alloying with scandium increases strength properties, improves the weldability and affects the character and the velocity of decomposition of a supersaturated solid solution. The best compromise between strength and plastic properties is stated to be provided by combined introduction of Sc and Zr to Al-Li alloys

  2. Mapping between Alloy specifications and database implementations

    OpenAIRE

    Cunha, Alcino; Pacheco, Hugo

    2009-01-01

    The emergence of lightweight formal methods tools such as Alloy improves the software design process, by encouraging developers to model and verify their systems before engaging in hideous implementation details. However, an abstract Alloy specification is far from an actual implementation, and manually refining the former into the latter is unfortunately a non-trivial task. This paper identifies a subset of the Alloy language that is equivalent to a relational database schema with the most c...

  3. Microduplex structure in commercial ageing alloys

    International Nuclear Information System (INIS)

    Regimes of mechanical thermal treatment of ageing alloys providing the formation of fine-dispersed two-phase structure have been developed using the 36NKhTYu alloy. It has been shown that fine-dispersed two-phase structure (microduplex) is formed in the process of high-temperature recrystallyzation of heavy deformed alloys containing particles of γ'-phase in the deformed lattice

  4. Metal Dusting of Heat-Resistant Alloys

    OpenAIRE

    Al-Meshari, Abdulaziz I.

    2008-01-01

    Metal dusting leads to disintegration of such alloys as iron and nickel-based into a ?dust? of particulate metal, metal carbide, carbon, and/or oxide. It occurs in strongly carburising environments at 400-900?C. Literature survey has shown that alloys behave differently in metal dusting conditions based on their composition and the environment. Metal dusting mechanisms for iron and nickel-based alloys have been proposed but, nevertheless, have not been agreed upon and numerous modifications t...

  5. Fuel powder production from ductile uranium alloys

    International Nuclear Information System (INIS)

    Metallic uranium alloys are candidate materials for use as the fuel phase in very-high-density LEU dispersion fuels. These ductile alloys cannot be converted to powder form by the processes routinely used for oxides or intermetallics. Three methods of powder production from uranium alloys have been investigated within the US-RERTR program. These processes are grinding, cryogenic milling, and hydride-dehydride. In addition, a gas atomization process was investigated using gold as a surrogate for uranium. (author)

  6. Alloy nanoparticle synthesis using ionizing radiation

    Science.gov (United States)

    Nenoff, Tina M.; Powers, Dana A.; Zhang, Zhenyuan

    2011-08-16

    A method of forming stable nanoparticles comprising substantially uniform alloys of metals. A high dose of ionizing radiation is used to generate high concentrations of solvated electrons and optionally radical reducing species that rapidly reduce a mixture of metal ion source species to form alloy nanoparticles. The method can make uniform alloy nanoparticles from normally immiscible metals by overcoming the thermodynamic limitations that would preferentially produce core-shell nanoparticles.

  7. Recent developments in advanced aircraft aluminium alloys

    International Nuclear Information System (INIS)

    Highlights: • To compete with composites, performance of aluminium alloys should be increased. • Al–Li alloys have higher strength, fracture and fatigue/corrosion resistance. • Improvements of aerospace Al alloys are due to optimised solute content and ratios. • In selecting new materials, there should be no reduction in the level of safety. • The use of hybrid materials could provide additional opportunities for Al alloys. - Abstract: Aluminium alloys have been the primary material for the structural parts of aircraft for more than 80 years because of their well known performance, well established design methods, manufacturing and reliable inspection techniques. Nearly for a decade composites have started to be used more widely in large commercial jet airliners for the fuselage, wing as well as other structural components in place of aluminium alloys due their high specific properties, reduced weight, fatigue performance and corrosion resistance. Although the increased use of composite materials reduced the role of aluminium up to some extent, high strength aluminium alloys remain important in airframe construction. Aluminium is a relatively low cost, light weight metal that can be heat treated and loaded to relatively high level of stresses, and it is one of the most easily produced of the high performance materials, which results in lower manufacturing and maintenance costs. There have been important recent advances in aluminium aircraft alloys that can effectively compete with modern composite materials. This study covers latest developments in enhanced mechanical properties of aluminium alloys, and high performance joining techniques. The mechanical properties on newly developed 2000, 7000 series aluminium alloys and new generation Al–Li alloys are compared with the traditional aluminium alloys. The advantages and disadvantages of the joining methods, laser beam welding and friction stir welding, are also discussed

  8. Microstructural characterization of EXCEL alloy

    International Nuclear Information System (INIS)

    The microstructure of Excel alloy was studied by optical and scanning electron microscopy. X-ray diffraction was used to analyze the present phases. Characteristic peaks of α-Zr (HCP), β-Zr (BCC) and δhydride (FCC) were identified. The high relatives intensities of certain peaks suggest that samples are textured. Basal poles were dominant in radial-longitudinal planes and prismatic poles have the highest concentration in radial-tangential planes (author)

  9. Pack cementation coatings for alloys

    Energy Technology Data Exchange (ETDEWEB)

    He, Yi-Rong; Zheng, Minhui; Rapp, R.A. [Ohio State Univ., Columbus, OH (United States)

    1996-08-01

    The halide-activated pack cementation process was modified to produce a Ge-doped silicide diffusion coating on a Cr-Cr{sub 2}Nb alloy in a single processing step. The morphology and composition of the coating depended both on the composition of the pack and on the composition and microstructure of the substrate. Higher Ge content in the pack suppressed the formation of CrSi{sub 2} and reduced the growth kinetics of the coating. Ge was not homogeneously distributed in the coatings. In cyclic and isothermal oxidation in air at 700 and 1050{degrees}C, the Ge-doped silicide coating protected the Cr-Nb alloys from significant oxidation by the formation of a Ge-doped silica film. The codeposition and diffusion of aluminum and chromium into low alloy steel have been achieved using elemental Al and Cr powders and a two-step pack cementation process. Sequential process treatments at 925{degrees}C and 1150{degrees}C yield dense and uniform ferrite coatings, whose compositions are close to either Fe{sub 3}Al or else FeAl plus a lower Cr content, when processed under different conditions. The higher content of Al in the coatings was predicted by thermodynamic calculations of equilibrium in the gas phase. The effect of the particle size of the metal powders on the surface composition of the coating has been studied for various combinations of Al and Cr powders.

  10. Superplastic properties of magnesium alloys

    Directory of Open Access Journals (Sweden)

    M. Greger

    2007-06-01

    Full Text Available Purpose: The paper summarises results of experiments aimed at development of structure of modified Mg-Al-Zn alloys at hot deformation.Design/methodology/approach: Methods ARB and ECAP were used in the described experiment. It was proved that hardly forming materials could achieve very high plastics properties.Findings: After making plastics deformation, the using materials of alloys AZ61 and AZ91 analysed superplastics behaviour, it was certified by obtaining results, when ductility to rupture of alloy AZ91 was 418 %, it is demostrated at conclusion of the article.Research limitations/implications: The experiment proved big influence of previous plastics deformation to ending values of mechanical properties. It was verified that better results are at rolling in more steps compared to rolling in one pass.Practical implications: The low submission temperature at last pass through die it causes obtaining higher final properties.Originality/value: It was obtained the material about grain size d ≈ 0,7μm during using the technology of ECAP. Abreast of it the technology ARB enabled to get material of grain size in interval d ≈ 1-10 μm. The sekond technology brings higher strength properties. Only 3 cycles were sufficient to lower original grain size under limit 10 μm

  11. Nanodispersed boriding of titanium alloy

    International Nuclear Information System (INIS)

    The problem of improving the operational reliability of machines is becoming increasingly important due to the increased mechanical, thermal and other loads on the details. There are many surface hardening methods for machines parts which breakdown begins with surface corruption. The most promising methods are chemical-thermal treatment. The aim of this work is to study the impact of boriding on the structure and properties of titanium alloy. Materials and Methods: The material of this study is VT3-1 titanium alloy. The boriding were conducted using nanodispersed powder blend based on boric substances. It is established that boriding of paste compounds allows obtaining the surface hardness within 30 - 29 GPa and with declining to 27- 26 GPa in layer to the transition zone (with total thickness up to 110 μm) owing to changes of the layer phase composition where T2B, TiB, TiB2 titanium borides are formed. The increasing of chemical-thermal treatment time from 15 minutes to 2 hours leads to thickening of the borated layer (30 - 110 μm) and transition zone (30 - 190 μm). Due to usage of nanodispersed boric powder, the boriding duration is decreasing in 2 - 3 times. This allows saving time and electric energy. The developed optimal mode of boriding the VT3-1 titanium alloy allows obtaining the required operational characteristics and to combine the saturation of the surface layer with atomic boron and hardening

  12. Microbial corrosion of aluminum alloy.

    Science.gov (United States)

    Yang, S S; Chen, C Y; Wei, C B; Lin, Y T

    1996-11-01

    Several microbes were isolated from the contaminated fuel-oil in Taiwan and the microbial corrosion of aluminum alloy A356-T6 was tested by MIL-STD-810E test method. Penicillium sp. AM-F5 and Cladosporium resinac ATCC 22712 had significant adsorption and pitting on the surface of aluminum alloy, Pseudomonas acruginosa AM-B5 had weak adsorption and some precipitation in the bottom, and Candida sp. AM-Y1 had the less adsorption and few cavities formation on the surface. pH of the aqueous phase decreased 0.3 to 0.7 unit for 4 months of incubation. The corrosion of aluminum alloy was very significant in the cultures of Penicillium sp. AM-F2, Penicillium sp. AM-F5 and C. resinac ATCC 22712. The major metabolites in the aqueous phase with the inoculation of C. resinac were citric acid and oxalic acid, while succinic acid and fumaric acid were the minors. PMID:10592801

  13. Alloy NASA-HR-1

    Science.gov (United States)

    Chen, Po-Shou; Mitchell, Michael

    2005-01-01

    NASA-HR-1 is a high-strength Fe-Ni-base superalloy that resists high-pressure hydrogen environment embrittlement (HEE), oxidation, and corrosion. Originally derived from JBK-75, NASA-HR-1 has exceptional HEE resistance that can be attributed to its gamma-matrix and eta-free (Ni3Ti) grain boundaries. The chemistry was formulated using a design approach capable of accounting for the simultaneous effects of several alloy additions. This approach included: (1) Systematically modifying gamma-matrix compositions based on JBK-75; (2) Increasing gamma (Ni3(Al,Ti)) volume fraction and adding gamma-matrix strengthening elements to obtain higher strength; and (3) Obtaining precipitate-free grain boundaries. The most outstanding attribute of NASA-HR-1 is its ability to resist HEE while showing much improved strength. NASA-HR-1 has approximately 25% higher yield strength than JXK-75 and exhibits tensile elongation of more than 20% with no ductility loss in a hydrogen environment at 5 ksi, an achievement unparalleled by any other commercially available alloy. Its Cr and Ni contents provide exceptional resistance to environments that promote oxidation and corrosion. Microstructural stability was maintained by improved solid solubility of the gamma-matrix, along with the addition of alloying elements to retard eta (Ni3Ti) precipitation. NASA-HR-1 represents a new system that greatly extends the compositional ranges of existing HEE-resistant Fe-Ni-base superalloys.

  14. Characterization of a NIMONIC TYPE super alloy

    International Nuclear Information System (INIS)

    Mechanical properties of strength and thermofluence of a NIMONIC type super alloy under thermal treatment was determined. The relationship between microstructure, phases and precipitates was also studied. (author)

  15. Radiation enhanced diffusion in fcc alloys

    International Nuclear Information System (INIS)

    Diffusion mechanisms in fcc materials during irradiation with high energy particles due to vacancies, interstitials, di-interstitials, and dynamic crowdions are discussed. It is shown that in most alloys an increase in the degree of order is obtained by migration vacancies and interstitials, and only in α-copper-zinc alloys mainly interstitials and in nickel-chromium alloy mainly vacancies are able to increase the degree of order during irradiation. the migration activation energies of interstitials and of vacancies for these two alloys are derived. Mass transport also by channeling and by dynamic crowdions is shown for Ni63 in nickel irradiated with 1.85 MeV electrons

  16. CVD of refractory amorphous metal alloys

    International Nuclear Information System (INIS)

    In this work, a novel process is described for the fabrication of multi-metallic amorphous metal alloy coatings using a chemical vapor deposition (CVD) technique. Of special interest in this work are amorphous metal alloys containing Mo and/or Cr which have high crystallization temperatures and readily available low decomposition temperature metal-bearing precursors. The conditions for amorphous alloy formation via CVD are described as well as the chemical properties of these materials. High temperature, aqueous corrosion tests have shown these materials (especially those containing Cr) are among the most corrosion resistant metal alloys known

  17. Casting Characteristics of Aluminum Die Casting Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The research program investigates the casting characteristics of selected aluminum die casting alloys. Specifically, the alloys' tendencies towards die soldering and sludge formation, and the alloys' fluidity and machinability are evaluated. It was found that: When the Fe and Mn contents of the alloy are low; caution has to be taken against possible die soldering. When the alloy has a high sludge factor, particularly a high level of Fe, measures must be taken to prevent the formation of large hardspots. For this kind of alloy, the Fe content should be kept at its lowest allowable level and the Mn content should be at its highest possible level. If there are problems in die filling, measures other than changing the alloy chemistry need to be considered first. In terms of alloy chemistry, the elements that form high temperature compounds must be kept at their lowest allowable levels. The alloys should not have machining problems when appropriate machining techniques and machining parameters are used.

  18. Titanium alloys Russian aircraft and aerospace applications

    CERN Document Server

    Moiseyev, Valentin N

    2005-01-01

    This text offers previously elusive information on state-of-the-art Russian metallurgic technology of titanium alloys. It details their physical, mechanical, and technological properties, as well as treatments and applications in various branches of modern industry, particularly aircraft and aerospace construction. Titanium Alloys: Russian Aircraft and Aerospace Applications addresses all facets of titanium alloys in aerospace and aviation technology, including specific applications, fundamentals, composition, and properties of commercial alloys. It is useful for all students and researchers interested in the investigation and applications of titanium.

  19. Surfacing of drawplates by compound alloys

    Energy Technology Data Exchange (ETDEWEB)

    Myshko, Y.D.; Gladchenko, A.N.; Gonchak, N.E.; Matkovskii, N.V.; Nechiporenko, V.G.

    1984-01-01

    Hard alloy sleeves fixed by soldering them with silver solder to drawplates of pelletizing heads in machinery used for processing plastic materials does not provide the required strength. A technology for surfacing the drawplates with wear-resistant alloys type VK8+MNMts by thermal impregnation has been developed. The strength of the compound alloy tested depends on the wetting of the solid phase by the matrix alloy-binder. The systems studied possessed high wettability and a stable bond between the phases. Surfaces drawplates have been successfully tested.

  20. Hydrogen embrittlement in lean uranium alloys

    International Nuclear Information System (INIS)

    This paper reports on internal hydrogen embrittlement characterized for U-0.8Ti alloy and U-2.3Nb alloy (where the number represents weight percent alloying element) in terms of the decrease in tensile ductility, the decrease in dimple rupture size, and the increase in the extent of quasi-cleavage with increasing hydrogen content below the one parts-per-million by weight level. Severe moisture corrosion at 21 degrees C for 42 Ms did not result in the penetration of hydrogen through the alloy to the extent of 3 mm sufficient to affect tensile ductility

  1. Surface treatment of new type aluminum lithium alloy and fatigue crack behaviors of this alloy plate bonded with Ti–6Al–4V alloy strap

    International Nuclear Information System (INIS)

    Highlights: ► A new generation aluminum lithium alloy which special made for Chinese commercial plane was investigated. ► Pattern of aluminum lithium alloy and Ti alloy were shown after anodization. ► Crack propagation of samples bonded with different wide Ti straps were studied in this paper. -- Abstract: Samples consisting of new aluminum lithium alloy (Al–Li alloy) plate developed by the Aluminum Company of America and Ti–6Al–4V alloy (Ti alloy) plate were investigated. Plate of 400 mm × 140 mm × 2 mm with single edge notch was anodized in phosphoric solution and Ti alloy plate of 200 mm × 20 (40) mm × 2 mm was anodized in alkali solution. Patterns of two alloys were studied at original/anodized condition. And then, aluminum alloy and Ti alloy plates were assembled into a sample with FM 94 film adhesive. Fatigue crack behaviors of the sample were investigated under condition of nominal stress σ = 36 MPa and 54 MPa, stress ratio of 0.1. Testing results show that anodization treatment modifies alloys surface topography. Ti alloy bonding to Al–Li alloy plate effectively retards crack growth than that of Al–Li alloy plate. Fatigue life of sample bonded with Ti alloy strap improves about 62.5% than that of non-strap plate.

  2. Activation analysis for different structural alloys considered for ITER

    International Nuclear Information System (INIS)

    Activation calculations have been made for the austentic steel 316SS, the ferritic alloy HT-9, the titanium alloy Ti6A14V, and the vanadium alloy V5Cr5Ti in a liquid metal (Na) design suggested recently for ITER. The calculations show that the vanadium alloy has the minimum short and long-term radioactivity and BHP. It also has the minimum decay heat at all the time. The titanium alloy has less radioactivity than the austenitic and this ferritic alloys. However, the decay heat of this alloy could exceed that of the conventional alloys

  3. Study of Alpha-Sigma Phase Transformation in Mechanically Alloyed Fe-Cr-Sn Alloys

    OpenAIRE

    Costa, B. F. O.; Caër, G. Le; Campos, N. Ayres de

    2001-01-01

    The solubility of tin is significantly extended by mechanical alloying in near equiatomic Fe-Cr alloys. The influences of Sn concentration and of grain size on the kinetics of formation of the sigma-phase have been studied using different techniques. The sigma-phase formation is much faster for as-milled alloys than it is for conventional alloys. The sigma-phase formation rate decreases with the increase of Sn concentration in alloys with nanometer-sized grains as it does in coarse-grained al...

  4. Bond Strength of Gold Alloys Laser Welded to Cobalt-Chromium Alloy

    OpenAIRE

    Watanabe, Ikuya; Wallace, Cameron

    2008-01-01

    The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also prepared. Tensile testing was conducted and data were statistically analyzed using ANOVA. The homogeneo...

  5. Data set for diffusion coefficients of alloying elements in dilute Mg alloys from first-principles

    Directory of Open Access Journals (Sweden)

    Bi-Cheng Zhou

    2015-12-01

    Full Text Available Diffusion coefficients of alloying elements in Mg are critical for the development of new Mg alloys for lightweight applications. Here we present the data set of the temperature-dependent dilute tracer diffusion coefficients for 47 substitutional alloying elements in hexagonal closed packed (hcp Mg calculated from first-principles calculations based on density functional theory (DFT by combining transition state theory and an 8-frequency model. Benchmark for the DFT calculations and systematic comparison with experimental diffusion data are also presented. The data set refers to “Diffusion coefficients of alloying elements in dilute Mg alloys: A comprehensive first-principles study” by Zhou et al. [1].

  6. Oxidation-reduction properties of americium, curium, berkelium, californium, einsteinium and fermium, and thermodynamic consequences for the 5f series

    International Nuclear Information System (INIS)

    The amalgamation of 5f elements from Am to Fm has been studied by using 241Am, 244Cm, 249Bk, 249Cf, 252Cf, 253Es, 254Es, 252Fm and 255Fm with two electrochemical methods, radiocoulometry and radiopolarography, perfectly adapted to investigate extremely diluted solutions when the concentration of electroactive species is as low as 10-16M. The theory of radiocoulometry has been developed in the general cases of reversible and irreversible electrode process. It has been used to interpret the experimental data on the kinetic curves of amalgamation, and to estimate the standard rate constant of the electrode process in complexing medium (citric). On the other hand the radiopolarographic method has been applied to study the mechanism of reduction at the dropping mercury electrode of cations M3+ in aqueous medium to the metal M with formation of amalgam. The results are exploited into two directions: 1- Acquisition of some data concerning the oxidation-reduction properties of elements from Am to Fm. Therefore the standard electrode E0 [M(III-0)] potentials for Bk, Cf and Es, and the standard electrode E0 [M(II-0)] potential for Fm are estimated and the relative stability of each oxidation state (from II to VII) of 5f elements is discussed; 2- Acquisition of unknown thermodynamic data on transcalifornium elements. Correlations between 4f and 5f elements are precised and some divergences appear for the second half of 4f and 5f series (i.e. for 65<=Z<=71 and 97<=Z<=103)

  7. Evaluation of thermal neutron cross-sections and resonance integrals of protactinium, americium, curium, and berkelium isotopes

    International Nuclear Information System (INIS)

    Data on the thermal neutron fission and capture cross-sections as well as their corresponding resonance integrals are reviewed and analysed. The data are classified according to the form of neutron spectra under investigation. The weighted mean values of the cross-sections and resonance integrals for every type of neutron spectra were adopted as evaluated data. (author). 87 refs, 2 tabs

  8. Combinatorial thin film materials science: From alloy discovery and optimization to alloy design

    Energy Technology Data Exchange (ETDEWEB)

    Gebhardt, Thomas, E-mail: gebhardt@mch.rwth-aachen.de; Music, Denis; Takahashi, Tetsuya; Schneider, Jochen M.

    2012-06-30

    This paper provides an overview of modern alloy development, from discovery and optimization towards alloy design, based on combinatorial thin film materials science. The combinatorial approach, combining combinatorial materials synthesis of thin film composition-spreads with high-throughput property characterization has proven to be a powerful tool to delineate composition-structure-property relationships, and hence to efficiently identify composition windows with enhanced properties. Furthermore, and most importantly for alloy design, theoretical models and hypotheses can be critically appraised. Examples for alloy discovery, optimization, and alloy design of functional as well as structural materials are presented. Using Fe-Mn based alloys as an example, we show that the combination of modern electronic-structure calculations with the highly efficient combinatorial thin film composition-spread method constitutes an effective tool for knowledge-based alloy design.

  9. Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

    Institute of Scientific and Technical Information of China (English)

    Sun Zhenqi; Huang Minghui

    2013-01-01

    A new type of aluminum lithium alloy (A1-Li alloy) Al-Li-S-4 was investigated by test in this paper.Alloy plate of 400 mm × 140 mm × 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated.Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant.The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation.Retardation effect is related with width and thickness of strap.Flaws have an observable effect on crack propagation direction.

  10. Iron-based amorphous alloys and methods of synthesizing iron-based amorphous alloys

    Science.gov (United States)

    Saw, Cheng Kiong; Bauer, William A.; Choi, Jor-Shan; Day, Dan; Farmer, Joseph C.

    2016-05-03

    A method according to one embodiment includes combining an amorphous iron-based alloy and at least one metal selected from a group consisting of molybdenum, chromium, tungsten, boron, gadolinium, nickel phosphorous, yttrium, and alloys thereof to form a mixture, wherein the at least one metal is present in the mixture from about 5 atomic percent (at %) to about 55 at %; and ball milling the mixture at least until an amorphous alloy of the iron-based alloy and the at least one metal is formed. Several amorphous iron-based metal alloys are also presented, including corrosion-resistant amorphous iron-based metal alloys and radiation-shielding amorphous iron-based metal alloys.

  11. Lattice image studies of ordered alloys

    International Nuclear Information System (INIS)

    Lattice imaging in electron microscopy was successfully applied to the study of ordering in alloys. The approach included computer simulation (Mg3Cd), study of atomic arrangements near ordered lattice defects (Ni4Mo), fringe changes during phase transformation, and identification of fringe periodicities in alloys quenched from above the critical ordering temperature. (U.S.)

  12. Electroplating Zn-Al Alloy Technology

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The method of controlling separating anode and separating power source was used to perform orthogonal optimization for the parameters in electroplating Zn-Al alloy.The electroplating Zn-Al alloy technology was decided, in which the content of Al is about 12%-15%.

  13. Solidification shrinkage of Ni-Cr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Feng [Materials Interfacial Physical-Chemistry Research Institute, Chongqing Institute of Technology, No. 4 Xingsheng Road, Yangjiaping, Chongqing 400050 (China); Yang Renhui [Materials Interfacial Physical-Chemistry Research Institute, Chongqing Institute of Technology, No. 4 Xingsheng Road, Yangjiaping, Chongqing 400050 (China)]. E-mail: yangrh2004@21cn.com; Fang Liang [Department of Applied Physics, Chongqing University, No. 174 Shazhong Road, Shapingba, Chongqing 400044 (China); Zhang Chi [Materials Interfacial Physical-Chemistry Research Institute, Chongqing Institute of Technology, No. 4 Xingsheng Road, Yangjiaping, Chongqing 400050 (China)

    2006-07-25

    Ni-Cr superalloy is widely used in casting of critical components in gas-turbine engines. Because of the significant change in density of alloy in mushy state, porosity is likely to arise in the alloy parts due to the solidification shrinkage. On the other hand, because Ni-Cr alloy is very hard and difficult to be machined, the net-shape casting of the alloy is a cheap process. Therefore, it is essential to measure the solidification shrinkage of mushy alloy for obtaining low-cost net-shape casting ingot without inner porosity. However, there have been a few reports on the solidification shrinkage of the liquid Ni-Cr alloy. In this work, the solidification shrinkage of Ni-Cr alloy was calculated by measuring its density using modified sessile drop method. It has been found that, for Ni-(0-24.53)% Cr alloys, the solidification shrinkage value fluctuates in the range of 0.91-2.02% and it tends to increase with increasing Cr concentration in 0-10% Cr. However, for Cr concentration more than 10%, the solidification shrinkage holds on a certain value of 2.00%.

  14. Theory of Rare-Earth Alloys

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker

    1977-01-01

    A mean-field random alloy theory combined with a simple calculation of the exchange interaction J(c,Q) is shown to quantitatively account for the phase diagrams for alloys of rare-earth metals with Y, Lu, Sc, and other rare-earth metals. A concentration-dependent J(c,Q) explains the empirical 2...

  15. Review of tantalum and niobium alloy production

    International Nuclear Information System (INIS)

    This paper concentrates on the current state of niobium- and tantalum-base alloy production. The materials requirements, alloy compositions of interest, and production status are discussed. Finally, a list of developments needed to support the SP-100 program will be identified. A bibliography is included

  16. Intermetallic alloys: Deformation, mechanical and fracture behaviour

    International Nuclear Information System (INIS)

    The state of the art in intermetallic alloys development with particular emphasis on deformation, mechanical and fracture behaviour is documented. This review paper is prepared to lay the ground stones for a future work on mechanical property characterization and fracture behaviour of intermetallic alloys at GKSS. (orig.)

  17. Alloys oxidation of aluminium-scandium system

    International Nuclear Information System (INIS)

    Alloys and compounds of rare earth metals with aluminium thanks to their high corrosion stability, durability and small specific weight find to apply in various new techniques. On the base of carried out investigation it could be recommend as de oxidizing and alloying compositions containing 15-50 % of scandium as in possession of minimal oxidation

  18. Preparation of hydrogenated amorphous silicon tin alloys

    OpenAIRE

    Vergnat, M.; Marchal, G.; Piecuch, M.

    1987-01-01

    This paper describes a new method to obtain hydrogenated amorphous semiconductor alloys. The method is reactive co-evaporation. Silicon tin hydrogenated alloys are prepared under atomic hydrogen atmosphere. We discuss the influence of various parameters of preparation (hydrogen pressure, tungsten tube temperature, substrate temperature, annealing...) on electrical properties of samples.

  19. Passivation of alloys on titanium base

    International Nuclear Information System (INIS)

    Results of passivation studies on Ti-base alloys show that the inhibition of anodic processes on these alloys is determined not by the total thickness of passive film, but by its barrier layer. The protective properties of the barrier layer increase if the passive film is formed at anodic potentials more positive than +1.4V. They were determined not by chemical stability of barrier layer, but by an inhibition which is produced by this layer for ionic current along the anodic direction. The protective properties are related to character defectiveness and semiconductor properties of the barrier layer. Additions of Al, V, Mo, Zr, and Nb to titanium increase the anodic current in the passive state. Additions of Cr and Mn decrease this current, and Sn does not influence it. The direct electrochemical transition of titanium ions into solution (as TiO2+) is a main anodic process of titanium dissolution and its low alloyed alloys in the passive state. Double phase titanium alloys (after tempering) have a lower corrosion resistance than those in the homogeneous single phase state (after hardening). The less passive phase of double phase alloys dissolves perferentially. The less passive phases are: in the active state, α-phase; in transpassive state for Ti--Mo alloys, β-phase, containing in a high Mo percentage; and for Ti--Cr alloys, γ-phase, having more chromium. (U.S.)

  20. Materials data handbook: Aluminum alloy 2219

    Science.gov (United States)

    Muraca, R. F.; Whittick, J. S.

    1972-01-01

    A summary of the materials property information for aluminum 2219 alloy is presented. The scope of the information includes physical and mechanical properties at cryogenic, ambient, and elevated temperatures. Information on material procurement, metallurgy of the alloy, corrosion, environmental effects, fabrication, and joining techniques is developed.

  1. Friction Stir Welding of Aluminum Alloys

    Institute of Scientific and Technical Information of China (English)

    FU Zhi-hong; HE Di-qiu; WANG Hong

    2004-01-01

    Friction stir welding(FSW), a new solid-state welding technology invited in the early 1990s,enables us weld aluminum alloys and titanium alloys etc. The processing of FSW, the microstructure in FSW alloysand the factors influencing weld quality are introduced. The complex factors affecting the properties are researched.

  2. Phase transformations on Zr-Nb alloys

    International Nuclear Information System (INIS)

    This research intended the laboratory scale experimental development of Zr-Nb alloys with adequate characteristics for use as fuel element cladding or for the making of irradiation capsules. Zr-Nb alloys with different Nb contents were melted and the resulting material was characterised. The following metallurgical aspects were considered: preparation of Zr-Nb alloys with various Nb contents; heat and thermomechanical treatments; microstructural characterization; mechanical properties; oxidation properties. The influence of the heat treatment and thermomechanical treatment, on the out-of-pile mechanical and oxidation properties of the Zr-Nb alloys were studied. It was found that the alloy microhardness increases with the Nb content and/or with the thermomechanical treatment. Mechanical properties such as yield and ultimate tensile strength as well as elongation were determined by means of compression tests. The results showed that the alloy yield stress increases with the Nb content and with the thermomechanical treatment, while its elongation decreases. Thermogravimetric analysis determined the alloy oxidation kinetics, in the 400 - 800 deg C interval, at 1 atm. oxygen pressure. The results showed that the alloy oxidation rate increases with the temperature and Nb content. It was also observed that the oxidation rate increases considerably for temperatures higher than 600 deg C.(author)

  3. Sputtered Clusters from Niobium-Vanadium Alloys

    DEFF Research Database (Denmark)

    Schou, Jørgen; Hofer, W. O.

    1982-01-01

    A series of Nb&z.sbnd;V alloys have been irradiated by 6 keV argon ions. Homonuclear and heteronuclear clusters emitted from these alloys have been studied by means of post-ionization and/or secondary ion mass spectrometry. The intensity of clusters of atomic masses up to approximately 300 amu wa...

  4. Methods for Electrodepositing Composition-Modulated Alloys

    DEFF Research Database (Denmark)

    Leisner, Peter; Nielsen, Christian Bergenstof; Tang, Peter Torben; Dörge, Tommy C.; Møller, Per

    1996-01-01

    Materials exhibiting unique mechanical, physical and chemical properties can be obtained by combining thin layers of different metals or alloys forming a multilayered structure. Two general techniques exist for electrodepositing composition-modulated alloy (CMA) materials; dual-bath and single...

  5. Zirconium alloys produced by recycling zircaloy tunings

    Energy Technology Data Exchange (ETDEWEB)

    Gamba, N.S. [Instituto de Investigaciones en Catálisis y Petroquímica, INCAPE (FIQ, UNL–CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina); Carbajal-Ramos, I.A. [Centro Atómico Bariloche, CNEA e Instituto Balseiro, Universidad Nacional de Cuyo, Av. Bustillo 9500, 8400 Bariloche (Argentina); Ulla, M.A.; Pierini, B.T. [Instituto de Investigaciones en Catálisis y Petroquímica, INCAPE (FIQ, UNL–CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina); Gennari, F.C., E-mail: gennari@cab.cnea.gov.ar [Centro Atómico Bariloche, CNEA e Instituto Balseiro, Universidad Nacional de Cuyo, Av. Bustillo 9500, 8400 Bariloche (Argentina)

    2013-11-25

    Highlights: •Zr–Ti alloys were successfully produced by two-step procedure. •Zircaloy tunings were used as a valuable source of Zr. •Zircaloy tunings and Ti powders was milled under hydrogen to produce hydride powders. •Hydride powders were decomposed by heating at 900 °C to synthesize the Zr-based alloy. •The procedure could be extended to the production of other Zr-based alloys. -- Abstract: Zircaloy chips were recycled to successfully produce Zr–Ti alloys with bcc structure and different compositions. The procedure developed involves two steps. First, the reactive mechanical alloying (RMA) of the zircaloy tunings and Ti powders was performed to produce metal hydride powders, with a high refinement of the microstructure and a Zr–Ti homogeneous composition. Second, the metal hydride powders were thermally decomposed by heating up to 900 °C to synthesize the Zr-based alloy with a selected composition. The change in the nature of the powders from ductile to brittle during milling avoids both cold working phenomena between the metals and the use of a control agent. A minimum milling time is necessary to produce the solid solution with the selected composition. The microstructure and structure of the final alloys obtained was studied. The present procedure could be extended to the production of Zr-based alloys with the addition of other metals different from Ti.

  6. Trends of Chinese RE Hydrogen Storage Alloys

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Ⅰ . Status of Chinese RE Hydrogen Storage Alloys 1. R εt D of RE Hydrogen Storage Alloys in China AB5 hydrogen storage materials, taking rare earth mischmetals as raw materials, developed rapidly in China in recent years. Today, different countries attach importance to the development and application of the new environmental protection reproducible power sources.

  7. Small angle neutron scattering in invar alloys

    International Nuclear Information System (INIS)

    Some results of low angle neutron scattering on 70-30 and 65-35 FeNi alloys are presented showing the existence of chemical small clusters associated with a magnetization inhomogeneity. A noticeable result is the appearance of a pseudo-periodical magnetization static fluctuation in a 65-35 FeNi alloy after irradiation with 2 MeV electrons

  8. New zirconium alloys for nuclear application

    International Nuclear Information System (INIS)

    Zirconium alloys are widely used in the nuclear industry, mainly in fuel cladding tubes and structural components for PWR plants. The service life of these components, which operate under high temperatures conditions (∼ 300 deg C), has led to developing new alloys with the aim to improve the mechanical properties, corrosion resistance and irradiation damage. The variation in the composition of the alloy produces second phase particles which alter the materials properties according to their size and distribution, is essential therefore, knowledge their characteristics. Analysis of second phase particles in zirconium alloys are carried out by scanning electron microscopy, transmission electron microscopy and image analysis. This study used the zircaloy-4 to illustrate the characterization of these alloys through the study of second phase particles. (author)

  9. Internal chlorination of Ni-Cr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Berztiss, D.; Hennesen, K.; Grabke, H.J. [Max-Planck-Institut fuer Eisenforschung GmbH, Duesseldorf (Germany)

    1998-12-31

    In contrast to internal oxidation, sulfidation and carburization, very little information is available regarding internal chlorination, especially diffusion of chlorine in metallic alloys. This paper describes results of experiments on Ni-Cr alloys (<10 wt% Cr) exposed in an atmosphere containing radioactive HCl. The diffusion of chlorine in the alloy can be determined by measurement of residual {beta}-activity from the sample surface. Successively thin layers (0.5-10 {mu}m) of the alloy were removed by lapping and the surface activity was measured to obtain a depth profile. Both single and polycrystalline materials were tested. Through this work it should be determined if there is in fact solubility and diffusion of chlorine in Ni-based alloys as some authors have proposed or if the ingress of chlorine is mainly a grain boundary phenomenon. (orig.)

  10. Corrosion resistance improvement of titanium base alloys

    Directory of Open Access Journals (Sweden)

    Mihai V. Popa

    2010-01-01

    Full Text Available The corrosion resistance of the new Ti-6Al-4V-1Zr alloy in comparison with ternary Ti-6Al-4V alloy in Ringer-Brown solution and artificial Carter-Brugirard saliva of different pH values was studied. In Ringer-Brown solution, the new alloy presented an improvement of all electrochemical parameters due to the alloying with Zr; also, impedance spectra revealed better protective properties of its passive layer. In Carter-Brugirard artificial saliva, an increase of the passive film thickness was proved. Fluoride ions had a slight negative influence on the corrosion and ion release rates, without to affect the very good stability of the new Ti-6Al-4V-1Zr alloy.

  11. Underwater laser beam welding of Alloy 690

    International Nuclear Information System (INIS)

    Stress Corrosion Clacking (SCC) has been reported at Alloy 600 welds between nozzles and safe-end in Pressurized Water Reactor (PWR) plant. Alloy 690, which has higher chromium content than Alloy 600, has been applied for cladding on Alloy 600 welds for repairing damaged SCC area. Toshiba has developed Underwater Laser Beam Welding technique. This method can be conducted without draining, so that the repairing period and the radiation exposure during the repair can be dramatically decreased. In some old PWRs, high-sulfur stainless steel is used as the materials for this section. It has a high susceptibility of weld cracks. Therefore, the optimum welding condition of Alloy 690 on the high-sulfur stainless steel was investigated with our Underwater Laser Beam Welding unit. Good cladding layer, without any crack, porosity or lack of fusion, could be obtained. (author)

  12. Study on hardening mechanisms in aluminium alloys

    Directory of Open Access Journals (Sweden)

    P. K. Mandal

    2016-01-01

    Full Text Available The Al-Zn-Mg alloys are most commonly used age-hardenable aluminium alloys. The hardening mechanism is further enhanced in addition of Sc. Sc additions to aluminium alloys are more promising. Due to the heterogeneous distribution of nano-sized Al3Sc precipitates hardening effect can be accelerated. Mainly, highlight on hardening mechanism in Al-Zn-Mg alloys with Sc effect is to study. In addition, several characterisations have been done to age-hardening measurements at elevated temperatures from 120oC to 180 oC. The ageing kinetics has also been calculated from Arrhenius equation. Furthermore, friction stir processing (FSP can be introduced to surface modification process and hardened the cast aluminium alloys. In this study, hardening mechanism can be evaluated by Vicker’s hardness measurement and mechanical testing is present task.

  13. Mechanical behaviour of aluminium-lithium alloys

    Indian Academy of Sciences (India)

    N Eswara Prasad; A A Gokhale; P Rama Rao

    2003-02-01

    Aluminium-lithium alloys hold promise of providing a breakthrough response to the crying need for lightweight alloys for use as structurals in aerospace applications. Considerable worldwide research has gone into developing a range of these alloys over the last three decades. As a result, substantial understanding has been developed of the microstructure-based micromechanisms of strengthening, of fatigue and fracture as well as of anisotropy in mechanical properties. However, these alloys have not yet greatly displaced the conventionally used denser Al alloys on account of their poorer ductility, fracture toughness and low cycle fatigue resistance. This review aims to summarise the work pertaining to study of structure and mechanical properties with a view to indicate the directions that have been and can be pursued to overcome property limitations.

  14. Long - range foundry Al composite alloys

    Directory of Open Access Journals (Sweden)

    A. D. Mekhtiev

    2014-10-01

    Full Text Available The technology of obtaining nanostructural composite aluminum alloys consists in the plasma injection of refractory nanometric particles with simultaneous two-plane magnetic dynamic mixing of the melt. Particularly important in obtaining composite aluminum matrix alloys is the provision of the introduced particles wettability with the matrix melt for forming stable adhesive bonds. Nanostructured powder components can be considered not only to be a starting product for producing nanostructural composite aluminum alloys but as an independent commerce product. Nanostructural composite metal matrix alloys make one of the most prospective structural materials of the future, and liquid-phase technologies of their obtaining are the most competitive in producing products of nanostructural composite aluminum alloys in the industrial scale.

  15. Plating on stainless steel alloys

    International Nuclear Information System (INIS)

    Quantitative adhesion data are presented for a variety of electroplated stainless steel type alloys. Results show that excellent adhesion can be obtained by using a Wood's nickel strike or a sulfamate nickel strike prior to final plating. Specimens plated after Wood's nickel striking failed in the deposit rather than at the interface between the substrate and the coating. Flyer plate quantitative tests showed that use of anodic treatment in sulfuric acid prior to Wood's nickel striking even further improved adhesion. In contrast activation of stainless steels by immersion or cathodic treatment in hydrochloric acid resulted in very reduced bond strengths with failure always occurring at the interface between the coating and substrate

  16. Effect of ternary alloying elements on microstructure and superelastictity of Ti-Nb alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, D.C.; Mao, Y.F.; Li, Y.L.; Li, J.J.; Yuan, M. [Key Laboratory of Low Di-mensional Materials and Application Technology of Ministry of Education, Xiangtan University, Xiangtan, Hunan 411105 (China); Faculty of Material and Optical-Electronic Physics, Xiangtan University, Xiangtan, Hunan 411105 (China); Lin, J.G., E-mail: lin_j_g@xtu.edu.cn [Key Laboratory of Low Di-mensional Materials and Application Technology of Ministry of Education, Xiangtan University, Xiangtan, Hunan 411105 (China); Faculty of Material and Optical-Electronic Physics, Xiangtan University, Xiangtan, Hunan 411105 (China)

    2013-01-01

    The effect of ternary alloying elements (X=Ta, Fe, Zr, Mo, Sn and Si) on the microstructure, the mechanical properties and the superelasticity of Ti--22Nb-X alloys were investigated. The 1% addition of a ternary alloying element (X=Ta, Fe, Zr, Mo, Sn and Si) has a slight influence on the microstructure of the Ti-22Nb alloy. All the alloys after solution-treatment at 1073 K for 1.8 ks contain {beta} and {alpha} Double-Prime phases. The elements of Sn, Si, Fe and Ta with a high number of valence electrons or a small atomic size have a strong solid-solution strengthening effect to the {beta} phases in the alloys and the alloys with high Md{sup Macron} and low Bo{sup Macron} exhibit low elastic moduli. All the alloying elements improve the superelasticity of Ti-22Nb-X alloys. The elements, Fe, Mo, Sn and Si, which are with a high number of valence electrons and a small atomic size, strongly increase {sigma}{sub SIM} of the Ti-22Nb alloy.

  17. Effect of ternary alloying elements on microstructure and superelastictity of Ti–Nb alloys

    International Nuclear Information System (INIS)

    The effect of ternary alloying elements (X=Ta, Fe, Zr, Mo, Sn and Si) on the microstructure, the mechanical properties and the superelasticity of Ti–-22Nb–X alloys were investigated. The 1% addition of a ternary alloying element (X=Ta, Fe, Zr, Mo, Sn and Si) has a slight influence on the microstructure of the Ti–22Nb alloy. All the alloys after solution-treatment at 1073 K for 1.8 ks contain β and α″ phases. The elements of Sn, Si, Fe and Ta with a high number of valence electrons or a small atomic size have a strong solid–solution strengthening effect to the β phases in the alloys and the alloys with high Md¯ and low Bo¯ exhibit low elastic moduli. All the alloying elements improve the superelasticity of Ti–22Nb–X alloys. The elements, Fe, Mo, Sn and Si, which are with a high number of valence electrons and a small atomic size, strongly increase σSIM of the Ti–22Nb alloy.

  18. REVIEW ON RESEARCH AND DEVELOPMENT OF MAGNESIUM ALLOYS

    Institute of Scientific and Technical Information of China (English)

    Z.Yaug; J.P.Li; J.X.Zhang; G.W.Lorimer; J.Robson

    2008-01-01

    The current research and development of magnesium alloys is summarized. Several aspects of magnesium alloys are described: cast Mg alloy, wrought Mg alloy, and novel processing. The subjects are discussed individually and recommendations for further study arc listed in the final section.

  19. Crystallographic attributes of a shape-memory alloy

    OpenAIRE

    Bhattacharya, Kaushik

    1999-01-01

    Shape-memory Alloys are attractive for many potential applications. In an attempt to provide ideas and guidelines for the development of new shape-memory alloys, this paper reports on a series of investigations that examine the reasons in the crystallography that make (i) shape-memory alloys special amongst martensites and (ii) Nickel-Titanium special among shape-memory alloys.

  20. Shot peening of aluminium alloys

    International Nuclear Information System (INIS)

    Shot peening is a process of cold-hammering where a metallic surface is pelted with spherical grains. Each grain bumping into the surface acts as a hammer head and creates a small crater. The overlapping of these craters produces a residual compression layer just underneath the surface. It is well known that cracks cannot spread in a compression zone. In most cases of fatigue rupture and stress corrosion cracks propagate from the surface towards the inside so shot peening allows a longer lifetime of castings. Moreover most materials present a better resistance due to the cold-hammering effect of shot peening. Metallic surfaces can be treated in workshops or directly on site. Typical pieces that undergo shot peening on site are storing tanks, gas and steam turbines, tubes of steam generators and piping in oil or nuclear or chemical industries. This article describes shot peening from a theoretical and general point of view and presents the application to aluminium-lithium alloys. In the case of aluminium alloys shot peening can be used to shape the piece (peen-forming). (A.C.)

  1. Development of Metallic Sensory Alloys

    Science.gov (United States)

    Wallace Terryl A.; Newman, John A.; Horne, Michael R.; Messick, Peter L.

    2010-01-01

    Existing nondestructive evaluation (NDE) technologies are inherently limited by the physical response of the structural material being inspected and are therefore not generally effective at the identification of small discontinuities, making the detection of incipient damage extremely difficult. One innovative solution to this problem is to enhance or complement the NDE signature of structural materials to dramatically improve the ability of existing NDE tools to detect damage. To address this need, a multifunctional metallic material has been developed that can be used in structural applications. The material is processed to contain second phase sensory particles that significantly improve the NDE response, enhancing the ability of conventional NDE techniques to detect incipient damage both during and after flight. Ferromagnetic shape-memory alloys (FSMAs) are an ideal material for these sensory particles as they undergo a uniform and repeatable change in both magnetic properties and crystallographic structure (martensitic transformation) when subjected to strain and/or temperature changes which can be detected using conventional NDE techniques. In this study, the use of a ferromagnetic shape memory alloy (FSMA) as the sensory particles was investigated.

  2. Niobium-titanium oxide alloys

    International Nuclear Information System (INIS)

    Oxide dispersion strengthening of niobium with TiO2 has lead to a material which combines superior mechanical properties with the excellent biocompatibility and corrosion resistance of the soft metal niobium. Modern analytical tools including TEM with advanced analysis features (EDX and EELS) were used to clarify the mechanism being a dissolution of the oxide at sintering temperatures and a controlled precipitation by proper aging. The influence of variations of the oxide content, the sintering conditions and the aging treatment were investigated in order to optimize the alloy. The best combination of properties was found with a Nb-1%TiO2 variant with optimized oxygen content. Strength can very well be correlated with TEM data of dispersion parameters. Applications for this ODS niobium alloy are seen in the field of high-load bearing medical implants but also in chemical engineering wherever the good corrosion resistance of niobium is needed in combination with higher mechanical and thermal strength. 14 refs., 17 figs., 3 tabs. (Author)

  3. Environmentally Assisted Cracking of Nickel Alloys - A Review

    Energy Technology Data Exchange (ETDEWEB)

    Rebak, R

    2004-07-12

    Nickel can dissolve a large amount of alloying elements while still maintaining its austenitic structure. That is, nickel based alloys can be tailored for specific applications. The family of nickel alloys is large, from high temperature alloys (HTA) to corrosion resistant alloys (CRA). In general, CRA are less susceptible to environmentally assisted cracking (EAC) than stainless steels. The environments where nickel alloys suffer EAC are limited and generally avoidable by design. These environments include wet hydrofluoric acid and hot concentrated alkalis. Not all nickel alloys are equally susceptible to cracking in these environments. For example, commercially pure nickel is less susceptible to EAC in hot concentrated alkalis than nickel alloyed with chromium (Cr) and molybdenum (Mo). The susceptibility of nickel alloys to EAC is discussed by family of alloys.

  4. Activation analyses for different fusion structural alloys

    International Nuclear Information System (INIS)

    The leading candidate structural materials, viz., the vanadium alloys, the nickel or the manganese stabilized austenitic steels, and the ferritic steels, are analysed in terms of their induced activation in the TPSS fusion power reactor. The TPSS reactor has 1950 MW fusion power and inboard and outboard average neutron wall loading of 3.75 and 5.35 MW/m2 respectively. The results shows that, after one year of continuous operation, the vanadium alloys have the least radioactivity at reactor shutdown. The maximum difference between the induced radioactivity in the vanadium alloys and in the other iron-based alloys occurs at about 10 years after reactor shutdown. At this time, the total reactor radioactivity, using the vanadium alloys, is about two orders of magnitude less than the total reactor radioactivity utilizing any other alloy. The difference is even larger in the first wall, the FW-vanadium activation is 3 orders of magnitude less than other alloys' FW activation. 2 refs., 7 figs

  5. Advanced airframe alloys for supersonic transport

    International Nuclear Information System (INIS)

    With a specific gravity of 2.53 Mg m/sup -3/ compared with around 2.8 Mg m/sup -3/ for conventional aluminium alloys, the aluminium-lithium series offers the prospect of air frame weight savings equivalent to those anticipated with fibre-reinforced polymer composites, with the added advantage of continued use of well-established manufacturing routes. In seeking to identify materials for construction of future high-speed civil aircraft, with high-temperature capabilities superior to the current Concord alloy RR58, the creep and creep fracture properties of the aluminium-lithium alloy 8090-T.8771 have been compared with data available for three high strength conventional aluminium alloys, 2124-T851, 2419-T851 and 7010-T7351. At 427K, 890-T8771 displays similar stress-rupture characteristics and better creep resistance than 2124-T851, the test of the conventional aluminium alloys. The excellent creep performance of alloy 8090-T8771 then suggests that aluminium-lithium-matrix alloys suitably strengthened by a fine ceramic particle dispersion could be developed for high-temperature air frame applications. (author)

  6. Development of Zirconium alloys in China

    International Nuclear Information System (INIS)

    The important program of construction of nuclear reactors in China requires self-reliance on zirconium alloys for fuel cladding and assembly structural materials. This series of slides presents China's research and development program on zirconium alloys. Experimental studies have shown that N18 and N36 zirconium alloys have excellent out-of-pile properties comparing to Zr-4. Engineering studies have been performed on the N36 alloy, these studies have involved: the N36 alloy production on industrial scale, the manufacturing of N36 tubes and bar materials for fuel cladding, the resistance to corrosion and the irradiation behavior. N36 cladding tubes meet the design requirements and are superior to Zr-4 in terms of behavior in ionized water (and 70 ppm LiOH), in terms of creep resistance, of low-cycle fatigue property and of high temperature oxidation. N36 lead fuel rods and assemblies show a good integrity and appearance after the 2. cycle irradiation, they are still being tested in Qinshan NPP. More irradiated data of N36 alloys is needed for evaluation of in-pile behavior. The N36 alloy possesses a good machinability and economical efficiency

  7. Microstructure of undercooled Pb-Sn alloys

    Directory of Open Access Journals (Sweden)

    Walman Benício de Castro

    2001-01-01

    Full Text Available Melt undercooling opens new solidification pathways for non-equilibrium phases and non-conventional microstructures. Several techniques, including the fluxing technique, have been developed in order to reduce nucleation sites and to produce high undercoolings for metals and alloys. In this work the fluxing technique was applied to Pb-25wt%Sn (hypoeutectic, Pb-61.9wt%Sn (eutectic and Pb-90wt%Sn (hypereutectic alloys to investigate the influence of the undercooling on the microstructure of these alloys. For the hypoeutectic alloy, an increasing of the undercooling (deltaTe from 7 to 13 K resulted in interdendritic eutectic refinement. For the hypereutectic alloy, an increasing of undercooling from 8 to 16 K resulted in a reduction of the beta-Sn primary dendrites arm spacing from 50 m to 30 m. For the both hypoeutectic and eutectic alloys, an increasing of the undercooling resulted in an interdendritic eutectic with anomalous morphology. The results indicated that the critical eutectic undercooling, deltaTe*, that causes a transition from lamellar eutectic to anomalous eutectic in the Pb-Sn alloys, is around 6 K.

  8. Processing of Aluminum Alloys Containing Displacement Reaction Products

    OpenAIRE

    Stawovy, Michael Thomas

    1998-01-01

    Aluminum and metal-oxide powders were mixed using mechanical alloying. Exothermic displacement reactions could be initiated in the powders either by mechanical alloying alone or by heat treating the mechanically alloyed powders. Exponential relationships developed between the initiation time of the reaction and the mechanical alloying charge ratio. The exponential relationships were the result of changes in the intensity and quantity of collisions occurring during mechanical alloying. Di...

  9. Creep of nickel-base alloys in high temperature water

    Energy Technology Data Exchange (ETDEWEB)

    Fish, J.S.; Attanasio, S.A.; Krasodomski, H.T.; Wilkening, W.W.; Was, G.S.; Cookson, J.; Yi, Y.

    1999-08-01

    Creep tests were performed to compare the creep behavior of commercial nickel-base alloys as a function of stress, temperature, and the environment. The results support earlier work that showed that low carbon alloys are more susceptible to creep and intergranular cracking than are high carbon alloys. Results also show a smaller influence of a water environment on the creep rate of commercial, creep-resistant alloys compared to high purity alloys.

  10. Impurity control and corrosion resistance of magnesium-aluminum alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, M. [GM China Lab; Song, GuangLing [ORNL

    2013-01-01

    The corrosion resistance of magnesium alloys is very sensitive to the contents of impurity elements such as iron. In this study, a series of diecast AXJ530 magnesium alloy samples were prepared with additions of Mn and Fe. Through a comprehensive phase diagram calculation and corrosion evaluation, the mechanisms for the tolerance limit of Fe in magnesium alloy are discussed. This adds a new dimension to control the alloying impurity in terms of alloying composition design and casting conditions.

  11. Antibacterial biodegradable Mg-Ag alloys

    Directory of Open Access Journals (Sweden)

    D Tie

    2013-06-01

    Full Text Available The use of magnesium alloys as degradable metals for biomedical applications is a topic of ongoing research and the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed as implant materials to combine the favourable properties of magnesium with the well-known antibacterial property of silver. In this study, three Mg-Ag alloys, Mg2Ag, Mg4Ag and Mg6Ag that contain 1.87 %, 3.82 % and 6.00 % silver by weight, respectively, were cast and processed with solution (T4 and aging (T6 heat treatment.The metallurgical analysis and phase identification showed that all alloys contained Mg4Ag as the dominant β phase. After heat treatment, the mechanical properties of all Mg-Ag alloys were significantly improved and the corrosion rate was also significantly reduced, due to presence of silver. Mg(OH2 and MgO present the main magnesium corrosion products, while AgCl was found as the corresponding primary silver corrosion product. Immersion tests, under cell culture conditions, demonstrated that the silver content did not significantly shift the pH and magnesium ion release. In vitro tests, with both primary osteoblasts and cell lines (MG63, RAW 264.7, revealed that Mg-Ag alloys show negligible cytotoxicity and sound cytocompatibility. Antibacterial assays, performed in a dynamic bioreactor system, proved that the alloys reduce the viability of two common pathogenic bacteria, Staphylococcus aureus (DSMZ 20231 and Staphylococcus epidermidis (DSMZ 3269, and the results showed that the killing rate of the alloys against tested bacteria exceeded 90%. In summary, biodegradable Mg-Ag alloys are cytocompatible materials with adjustable mechanical and corrosion properties and show promising antibacterial activity, which indicates their potential as antibacterial biodegradable implant materials.

  12. Laser surface treatment of cast magnesium alloys

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2009-02-01

    Full Text Available Purpose: The goal of this work was to investigate influence of laser treatment on structure and properties MCMgAl3Zn1, MCMgAl6Zn1, MCMgAl9Zn1 and MCMgAl12Zn1 cast magnesium alloys.Design/methodology/approach: Tests were made on the experimental MCMgAl3Zn1 MCMgAl6Zn1 MCMgAl9Zn1 and MCMgAl12Zn1 casting magnesium alloys. Laser treatment was made using the Rofin DL020 HPDL high power diode laser in the argon shield gas cover with the technique of the continuous powder supply to the remelted pool area.Findings: Investigations of the surface layers carried out confirm that laser treatment of the surface layer of the Mg-Al-Zn casting magnesium alloys is feasible using the HPDL high power diode laser ensuring better properties compared to alloys properties after the regular heat treatment after employing the relevant process parameters. Occurrences were found based on the metallographic examinations of the remelted zone (RZ and the heat affected zone (HAZ in alloyed surface layer of the investigated casting magnesium alloy.Research limitations/implications: This investigation presents different laser power and in this research was used two powders, namely tungsten-, and titanium carbide.Practical implications: Reinforcing the surface of cast magnesium alloys by adding TiC and WC particles is such a possible way to achieve the possibilities of the laser melt injection process, which is a potential technique to produce a Metal-Matrix Composite (MMC layer in the top layer of a metal workpiece.Originality/value: The originality of this work is applying of High Power Diode Laser for alloying of magnesium alloy using hard particles like tungsten- and titanium carbide.

  13. Surface modification of Ti alloy by electro-explosive alloying and electron-beam treatment

    Energy Technology Data Exchange (ETDEWEB)

    Gromov, Victor, E-mail: gromov@physics.sibsiu.ru; Kobzareva, Tatiana, E-mail: kobzarevatanya@mail.ru; Budovskikh, Evgeniy, E-mail: budovskih-ea@physics.sibsiu.ru; Baschenko, Lyudmila, E-mail: gromov@physics.sibsiu.ru [Siberian State Industrial University, 42, Kirov Str., Novokuznetsk, 654007 (Russian Federation); Ivanov, Yuryi, E-mail: yufi55@mail.ru [Institute of High Current Electronics SB RAS, 4, Akademicheskii Av. Tomsk, 634055 (Russian Federation); National Research Tomsk State University, 30, Lenina Av. Tomsk, 634034 (Russian Federation)

    2016-01-15

    By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT6 is carried out after electric explosion alloying with boron carbide and subsequent irradiation by pulsed electron beam. The formation of an electro-explosive alloying zone of a thickness up to 50 µm, having a gradient structure, characterized by decrease in the concentration of carbon and boron with increasing distance to the treatable surface has been revealed. Subsequent electron-beam treatment of alloying zone leads to smoothing of the alloying area surface and is accompanied by the multilayer structure formation at the depth of 30 µm with alternating layers with different alloying degrees having the structure of submicro - and nanoscale level.

  14. Surface modification of Ti alloy by electro-explosive alloying and electron-beam treatment

    International Nuclear Information System (INIS)

    By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT6 is carried out after electric explosion alloying with boron carbide and subsequent irradiation by pulsed electron beam. The formation of an electro-explosive alloying zone of a thickness up to 50 µm, having a gradient structure, characterized by decrease in the concentration of carbon and boron with increasing distance to the treatable surface has been revealed. Subsequent electron-beam treatment of alloying zone leads to smoothing of the alloying area surface and is accompanied by the multilayer structure formation at the depth of 30 µm with alternating layers with different alloying degrees having the structure of submicro - and nanoscale level

  15. Surface modification of Ti alloy by electro-explosive alloying and electron-beam treatment

    Science.gov (United States)

    Gromov, Victor; Kobzareva, Tatiana; Ivanov, Yuryi; Budovskikh, Evgeniy; Baschenko, Lyudmila

    2016-01-01

    By methods of modern physical metallurgy the analysis of structure phase states of titanium alloy VT6 is carried out after electric explosion alloying with boron carbide and subsequent irradiation by pulsed electron beam. The formation of an electro-explosive alloying zone of a thickness up to 50 µm, having a gradient structure, characterized by decrease in the concentration of carbon and boron with increasing distance to the treatable surface has been revealed. Subsequent electron-beam treatment of alloying zone leads to smoothing of the alloying area surface and is accompanied by the multilayer structure formation at the depth of 30 µm with alternating layers with different alloying degrees having the structure of submicro - and nanoscale level.

  16. Preparation of casting alloy ZL101 with coarse aluminum-silicon alloy

    Institute of Scientific and Technical Information of China (English)

    YOU Jing; WANG Yao-wu; FENG Nai-xiang; YANG Ming-sheng

    2008-01-01

    The coarse Al-Si alloy produced by carbothermal reduction of aluminous ore contains 55% Al, 25% Si and some impurities. The main impurities are slag and iron. The process of manufacturing casting Al-Si alloy ZL101 with the coarse Al-Si alloy was studied. The phase constitution and microstructure of the coarse Al-Si alloy, slag and ZL101 were examined by X-ray diffractometry and scanning electron microscopy. The results show that the content of silicon and iron in the casting alloy reduces with the increase of the dosage of purificant and manganese, but increases with the rise of filtering temperature. It is found that casting Al-Si alloy conforming to industrial standard can be produced after refining by using purificant, and removing iron by using manganese and added magnesium.

  17. Effects of alloying side B on Ti-based AB2 hydrogen storage alloys

    Institute of Scientific and Technical Information of China (English)

    王家淳; 于荣海; 刘庆

    2004-01-01

    Ti-based AB2-type hydrogen storage alloys are a group of promising materials, which will probably replace the prevalent rare earth-based AB5-type alloys and be adopted as the main cathode materials of nickelmetal hydride (Ni-MH) batteries in the near future. Alloying in side B is a major way to improve the performance of Ti-based AB2-type alloys. Based on recent studies, the effects of alloying elements in side B upon the performance of Ti-based AB2 -type hydrogen storage alloys are systematically reviewed here. These performances are divided into two categories, namely PCI characteristics, including hydrogen storage capacity (HSC), plateau pressure (PP), pressure hysteresis (PH) and pressure plateau sloping (PPS) , and electrochemical properties, including discharge capacity (DC), activation property (AP), cycling stability (CS) and high-rate dischargeability (HRD). Furthermore, the existing problems in these investigations and some suggestions for future research are proposed.

  18. Steam tests of Alloy 600 and Alloy 690 mechanical plugs

    International Nuclear Information System (INIS)

    In 1988-89, randomly selected heats of Inconel 600 TT plugs were laboratory tested to determine the extent and distribution of carbide precipitation in the microstructure and their resistance to primary water stress corrosion cracking (PWSCC) in a 400 C doped steam autoclave. Early results indicated a ranking could be established between microstructure and PWSCC potential. Corrosion tests were extended to include Alloy 690 plugs after a top plug release occurred due to circumferential cracking above the expander. Destructive examination of pulled plugs confirmed the accuracy of the laboratory results which showed corrosion resistance can be correlated with the density of intergranular carbides and the doped steam test method did provide an accelerated method for assessing the relative PWSCC of mechanical plugs. To date, 70 Inconel 690 plugs, representing 17 heat treatment lots, have been tested and all plugs remain crack-free after 1000 hour exposure in doped steam. 4 figs

  19. Antibacterial biodegradable Mg-Ag alloys

    OpenAIRE

    D Tie; F Feyerabend; W-D Müller; Schade, R; Liefeith, K; KU Kainer; Willumeit, R.

    2013-01-01

    The use of magnesium alloys as degradable metals for biomedical applications is a topic of ongoing research and the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed as implant materials to combine the favourable properties of magnesium with the well-known antibacterial property of silver. In this study, three Mg-Ag alloys, Mg2Ag, Mg4Ag and Mg6Ag that contain 1.87 %, 3.82 % and 6.00 % silver by weight, respectively, were cast and processed with solut...

  20. Antibacterial Mg-Ag biodegradable alloys

    OpenAIRE

    Tie, Di

    2013-01-01

    The use of magnesium alloys as degradable metals for biomedical applications is topic of ongoing research. As a further aspect, the demand for multifunctional materials is increasing. Hence, binary Mg-Ag alloys were designed to combine the favourable properties of magnesium with the wellknown antibacterial property of silver. In this study, three Mg-Ag alloys, Mg2Ag, Mg4Ag and Mg6Ag which contain 1.87%, 3.82% and 6.00% silver by weight respectively were casted and processed with solution and ...

  1. Electron microscopy of nuclear zirconium alloys

    International Nuclear Information System (INIS)

    Transmission electron microscopy observations of the microstructure of zirconium alloys used in fuel sheaths of nuclear power reactors are reported. Specimens were observed after different thermal and mechanical treatment, similar to those actually used during fabrication of the sheaths. Electron micrographs and electron diffraction patterns of second phase particles present in zircaloy-2 and zircaloy-4 were also obtained, as well as some characteristic parameters. Images of oxides and hydrides most commonly present in zirconium alloys are also shown. Finally, the structure of a Zr-2,5Nb alloy used in CANDU reactors pressure tubes, is observed by electron microscopy. (Author)

  2. Graded coatings for metallic implant alloys

    Energy Technology Data Exchange (ETDEWEB)

    Saiz, Eduardo; Tomsia, Antoni P.; Fujino, Shigeru; Gomez-Vega, Jose M.

    2002-08-01

    Graded glass and glass-hydroxyapatite coatings on Ti-based and Co-Cr alloys have been prepared using a simple enameling technique. The composition of the glasses has been tailored to match the thermal expansion of the alloys. By controlling the firing time, and temperature, it has been possible to control the reactivity between the glass and the alloy and to fabricate coatings (25 to 150 mu m thick) with excellent adhesion to the substrate, resistant to corrosion and able to precipitate hydroxyapatite during in vitro tests in simulated body fluid.

  3. Recycling of vanadium alloys in fusion reactors

    International Nuclear Information System (INIS)

    The feasibility of reprocessing a vanadium alloy after its use as a structural material in a fusion reactor, in order to enable its subsequent hands-on recycling within the nuclear industry, has been determined. For less neutron-exposed components, clearance of materials has also been considered. A conceptual model for the radiochemical processing of the alloy has been developed and tested experimentally. Using di-2-ethyl-hexyl-phosphoric acid it is possible to purify the components of the V-Cr-Ti alloy after its exposure in a fusion reactor down to the required level of activation product concentrations

  4. Surface tension of tin-lithium alloys

    International Nuclear Information System (INIS)

    Temperature and concentration dependences of surface tension of tin-lithium alloys in the range of temperatures 250-410 deg C and concentrations 6.3-15.0 at. % Li were measured by the big drop method. It was ascertained that lithium is a surfactant component of Sn-Li system. Positive sign of surface tension temperature coefficients suggests prevailing lithium desorption from the liquid alloy surface with temperature increase. Calculated value of maximum lithium adsorption in its alloys with tin, containing about 4 at. % Li, makes up 8.5 x 10-6 mol/m2

  5. Laser repair hardfacing of titanium alloy turbine

    OpenAIRE

    A. Klimpel; D. Janicki; A. Lisiecki; A. Rzeźnikiewicz

    2011-01-01

    Purpose: of this paper: work out repair technology of worn abutments of aircraft jet engine blades forged of titanium alloy WT3-1.Design/methodology/approach: The study were based on the analysis of laser HPDL powder surfacing of titanium alloy plates using wide range chemical composition consumables of titanium alloys and mixtures of pure titanium and spherical powder of WC indicated that very hard and highest quality deposits are provided by powder mixture of 40-50%Ti+60-50%WC.Findings: It ...

  6. On Silicides in High Temperature Titanium Alloys

    OpenAIRE

    Ramachandra, C.; Vakil Singh; P. Rama Rao

    1986-01-01

    High temperature titanium alloys like IMI 685 contain small amounts of silicon (~ 0.25 wt. per cent) to improve creep resistance. Different types of silicides, namely Ti5Si3 (TiZr)5Si3(S1) and (TiZr)6 Si3 (S2), have been observed to precipitate in various silicon-bearing titanium alloys depending upon their composition and heat treatment. The precipitation of silicides, their orientation relationship with the matrix in different alloys, and the beneficial influence of thermo-mechanical treatm...

  7. Casting technique for light metal alloy

    International Nuclear Information System (INIS)

    Light metal alloys such as aluminum, magnesium, zinc and etc. can be produced in the various forms by casting technique. The casting technique for aluminum is classified as mold casting either using a sand mold or permanent mold; or both. Aluminum alloys casting are the most versatile of all common foundry alloys and generally have the highest castability ratings. Aluminum is adaptable to many of the commonly used casting methods and can be readily cast in metal molds. This work is attempted to investigate the availability and reliability of casting technique in obtaining of finish product. (Author)

  8. Current assisted superplastic forming of titanium alloy

    Directory of Open Access Journals (Sweden)

    Wang Guofeng

    2015-01-01

    Full Text Available Current assisted superplastic forming combines electric heating technology and superplastic forming technology, and can overcome some shortcomings of traditional superplastic forming effectively, such as slow heating rate, large energy loss, low production efficiency, etc. Since formability of titanium alloy at room temperature is poor, current assisted superplastic forming is suitable for titanium alloy. This paper mainly introduces the application of current assisted superplastic forming in the field of titanium alloy, including forming technology of double-hemisphere structure and bellows.

  9. Corrosion behavior of magnesium and magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    I.M.Baghni; WU Yin-shun(吴荫顺); LI Jiu-qing(李久青); ZHANG Wei(张巍)

    2004-01-01

    The automotive industry has crossed the threshold from using magnesium alloys in interior applications such as instrument panels and steering wheels to unprotected environment such as oil pan, cylinder head and wheels. The expanding territory of magnesium leads to new challenges: mainly environmental degradation of the alloys used and how they can be protected. The present critical review is aimed at understanding the corrosion behavior of magnesium and magnesium alloys in industrial and marine environments, and the effect of microstructure, additive elements and inhibitors on the corrosion mechanism.

  10. Sputtered Clusters from Niobium-Vanadium Alloys

    DEFF Research Database (Denmark)

    Schou, Jørgen; Hofer, W. O.

    1982-01-01

    A series of Nb&z.sbnd;V alloys have been irradiated by 6 keV argon ions. Homonuclear and heteronuclear clusters emitted from these alloys have been studied by means of post-ionization and/or secondary ion mass spectrometry. The intensity of clusters of atomic masses up to approximately 300 amu was...... related to the concentrations of Nb and V in the alloys. In addition, the behaviour of polyatomic cluster yields as a function of partial oxygen pressure was studied. At partial pressures larger than approximately 10 6Torr, the yields decreased with increasing partial pressures. By inclusion of the post...

  11. The Susceptibility to Hydrogen Induced Stress Cracking for Alloy 718 and Alloy 725

    OpenAIRE

    Stenerud, Gaute

    2014-01-01

    The Hydrogen Induced Stress Cracking (HISC) susceptibility of Alloy 718 and Alloy 725 where examined and compared. Pre-charged samples of each alloy where stepwise loaded during polarization in Cortest Proof rings. A safe load was found from this stepwise loading. To confirm that these load levels were safe, pre-charged samples were loaded to this load for 30 days during cathodic polarization. After fracture the fracture surfaces were examined in scanning electron microscope and the hydrogen ...

  12. Discussion on the Alloying Element Partition and Growth Kinetics of Proeutectoid Ferrite in Fe-C-Mn-X Alloys

    Science.gov (United States)

    Wei, R.; Enomoto, M.

    2011-12-01

    Experimental data on alloying element partition and growth kinetics of proeutectoid ferrite in quaternary Fe-C-Mn-Si, Ni, and Co alloys were reanalyzed using an approximate method, which permits a quick evaluation of alloy partitioning to be made. The method yielded results in good agreement with DICTRA and is applicable to Fe-C base multicomponent alloys. Differences of the predicted local condition at the α/ γ boundary from those previously presented in the alloys are noted.

  13. HAYNES 244 alloy – a new 760 ∘C capable low thermal expansion alloy

    Directory of Open Access Journals (Sweden)

    Fahrmann Michael G.

    2014-01-01

    Full Text Available HAYNES® 244TM alloy is a new 760∘C capable, high strength low thermal expansion (CTE alloy. Its nominal chemical composition in weight percent is Ni – 8 Cr – 22.5 Mo – 6 W. Recently, a first mill-scale heat of 244 alloy was melted by Haynes International, and processed to various product forms such as re-forge billet, plate, and sheet. This paper presents key attributes of this new alloy (CTE, strength, low-cycle fatigue performance, oxidation resistance, thermal stability as they pertain to the intended use in rings and seals of advanced gas turbines.

  14. Procurement and Initial Characterization of Alloy 230 and CMS Alloy 617

    International Nuclear Information System (INIS)

    Material for initial testing of alloy 230 and a controlled-chemistry variant of alloy 617 has been procured in the form of plates. 3/4-inch thick alloy 230 plate was commercially procured from Haynes International, and 2-inch thick CCA 617, an existing controlled-chemistry variant of alloy 617, was obtained from Alstom Power through the ultra-supercritical fossil energy program. This report describes the procurement of these plates and their characteristics in terms of vendor-supplied chemistry and mechanical properties. Further detailed characterization tests are planned for this fiscal year, and this report will be updated in September 2006 to include the results of these tests

  15. Grain refinement of an AZ63B magnesium alloy by an Al-1C master alloy

    Energy Technology Data Exchange (ETDEWEB)

    Yichuan Pan; Xiangfa Liu; Hua Yang [The Key Lab. of Liquid Structure and Heredity of Materials, Shandong Univ., Jinan (China)

    2005-12-01

    In order to develop a refiner of Mg-Al alloys, an Al-1C (in wt.%) master alloy was synthesized using a casting method. The microstructure and grain-refining performance of the Al-1C master alloy were investigated using X-ray diffraction (XRD), electron probe microanalysis (EPMA) and a grain-refining test. The microstructure of the Al-1C master alloy is composed of {alpha}-Al solid solution, Al{sub 4}C{sub 3} particles, and graphite phases. After grain refinement of AZ63B alloy by the Al-1C master alloy, the mean grain size reached a limit when 2 wt.% Al-C master alloy was added at 800 C and held for 20 min in the melt before casting. The minimum mean grain size is approximately 48 {mu}m at the one-half radius of the ingot and is about 17% of that of the unrefined alloy. The Al-1C master alloy results in better grain refinement than C{sub 2}Cl{sub 6} and MgCO{sub 3} carbon-containing refiners. (orig.)

  16. HAYNES 244 alloy – a new 760 ∘C capable low thermal expansion alloy

    OpenAIRE

    Fahrmann Michael G.; Srivastava S. Krishna; Pike Lee M.

    2014-01-01

    HAYNES® 244TM alloy is a new 760∘C capable, high strength low thermal expansion (CTE) alloy. Its nominal chemical composition in weight percent is Ni – 8 Cr – 22.5 Mo – 6 W. Recently, a first mill-scale heat of 244 alloy was melted by Haynes International, and processed to various product forms such as re-forge billet, plate, and sheet. This paper presents key attributes of this new alloy (CTE, strength, low-cycle fatigue performance, oxidation resistance, thermal stability) as they pertain t...

  17. Wear Behaviour of Zinc-Aluminium Alloys and the Bearings Produced from these Alloys

    OpenAIRE

    SAVAŞKAN, Temel; PÜRÇEK, Gençağa

    2000-01-01

    In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting. The wear behaviour of these alloys were investigated with a pin-on-disc machine The wear behaviour of the journal bearings produced from these alloys was investigated with a bearing test rig. The wear resistance of zinc-aluminum based alloys was found to be higher than that of CuSn12 bronze. ın addition, the bearings produced from the zinc-...

  18. Reaction kinetics of oxygen on single-phase alloys, oxidation of nickel and niobium alloys

    International Nuclear Information System (INIS)

    This research thesis first addresses the reaction kinetics of oxygen on alloys. It presents some generalities on heterogeneous reactions (conventional theory, theory of jumps), discusses the core reaction (with the influence of pressure), discusses the influence of metal self-diffusion on metal oxidation kinetics (equilibrium conditions at the interface, hybrid diffusion regime), reports the application of the hybrid diffusion model to the study of selective oxidation of alloys (Wagner model, hybrid diffusion model) and the study of the oxidation kinetics of an alloy forming a solid solution of two oxides. The second part reports the investigation of the oxidation of single phase nickel and niobium alloys (phase α, β and γ)

  19. Ageing of zirconium alloy components

    International Nuclear Information System (INIS)

    India has two types (pressurized heavy water reactors (PHWRs) and boiling water reactors (BWRs)) of commercial nuclear reactors in operation, in addition to research reactors. Many of the life limiting critical components in these reactors are fabricated from zirconium alloys. The progressive degradation of these components caused by the cumulative exposure of high energy neutron irradiation with increasing period of reactor operation was monitored to assess the degree of ageing. The components/specimens examined included fuel element claddings removed from BWRs, pressure tubes and garter springs removed from PHWRs and calandria tube specimens used in PHWRs. The tests included tension test (for cladding, garter spring), fracture toughness test (for pressure tube), crush test (for garter spring), and measurement of irradiation induced growth (for calandria tube). Results of various tests conducted are presented and applications of the test results are elaborated for residual life estimation/life extension of the components

  20. Recycling potential of titanium alloys

    International Nuclear Information System (INIS)

    This study examines just how long one must contain radioactive titanium before it can be safely reprocessed. It was assumed that the spent first wall and blanket structural material would be completely reprocessed in a standard manufacturing facility capable of both primary and secondary fabrication. It was found that reprocessing could occur when the chemical hazard associated with inhalation was greater than the hazard associated with inhalating the same amount of radioactive species. This conclusion allowed the use of the threshold limiting value (TLV) to set a limit on the airborne concentration of the elements. Then by calculating the time required for that amount of material to decay to the same diluent factor indicated by the biological hazard potential (BHP) in air, the time for reprocessing was determined. Based on these assumptions, it was determined that it is feasible to think of titanium, and some of its alloying elements as being recyclable in a relatively short time period

  1. Spectrochemical analysis of alloy-800

    International Nuclear Information System (INIS)

    An emission spectrographic method for the determination of seven elements in alloy-800 is described. The metal sample is converted to oxide and a 10 per cent carrier mixture (AgCl+LiF+C) is used for the determination of Al, Co, Cu, Mn, Mo and V. 45mg of this (sample + carrier) mixture is taken in a carrier distillation electrode and excited in a d.c. arc. The concentration ranges of the elements determined varies between 200ppm and 0.8 per cent and the coefficient of variation has been found to be around 15 per cent. For the determination of titanium, the sample oxide is glued to the flat tops of a pair of graphite electrodes and excited with a.c. spark. The concentration range covered is 0.35 to 2.0 per cent and the coefficient of variation is found to be ± 3 per cent. (author). 5 figs., 4 tabs

  2. Shape memory alloy based motor

    Indian Academy of Sciences (India)

    S V Sharma; M M Nayak; N S Dinesh

    2008-10-01

    Design and characterization of a new shape memory alloy wire based Poly Phase Motor has been reported in this paper. The motor can be used either in stepping mode or in servo mode of operation. Each phase of the motor consists of an SMA wire with a spring in series. The principle of operation of the poly phase motor is presented. The motor resembles a stepper motor in its functioning though the actuation principles are different and hence has been characterized similar to a stepper motor. The motor can be actuated in either direction with different phase sequencing methods, which are presented in this work. The motor is modelled and simulated and the results of simulations and experiments are presented. The experimental model of the motor is of dimension 150 mm square, 20 mm thick and uses SMA wire of 0·4 mm diameter and 125 mm of length in each phase.

  3. High hardness of alloyed ferrite after nitriding

    International Nuclear Information System (INIS)

    Detailed layer-by layer structure and phase analyses of the diffusion layer of nitrided binary alloys of iron with aluminium, chromium, vanadium and titanium have been carried out by means of a complex technique. Transition d-metals (chromium, vanadium and titanium) raise to a greater degree the solubility of nitrogen in the α solid solution, sharply increases the hardness of ferrite and decrease the depth of the layer. Nitrided binary alloys of iron with chromium, vanadium and titanium are strengthened through precipitation from the nitrogen-saturated α-solid solution of nitrides of alloying elements TiN, VN and CrN of a structure B1. A maximum hardness of ferrite alloyed by chromium, vanadium and titanium is observed after nitriding at 550 deg C when the precipitated special nitrides are fully coherent with the α matrix

  4. Processing magnesium alloys by severe plastic deformation

    Science.gov (United States)

    Figueiredo, Roberto B.; Aguilar, Maria Teresa P.; Cetlin, Paulo Roberto; Langdon, Terence G.

    2014-08-01

    The use of severe plastic deformation techniques for processing magnesium alloys has moved from the early difficulties of processing to a stage of tailoring the best properties of these materials. The present paper reviews processing, structure and mechanical properties characterization. It is shown that ultrafine-grained structures are obtained in magnesium alloys processed by multiple passes of Equal-Channel Angular Pressing at moderate temperatures. Ultrafine-grained structures are also obtained by room temperature processing by High- Pressure Torsion. The ultrafine-grained structures increase strength and introduce excellent superplastic capabilities in many magnesium alloys. Moreover, processing magnesium alloys by severe plastic deformation leads to the development of anisotropy in mechanical behavior.

  5. Copper alloy surface treatment by electron beams

    International Nuclear Information System (INIS)

    A basic study on copper alloy surface fusion treatment by electron beams is presented. Geometry, microstructure and hardness evolution of transformed domains in relation to the used parameters is established

  6. Solidification of Al alloys under electromagnetic field

    Institute of Scientific and Technical Information of China (English)

    崔建忠

    2003-01-01

    New theories and technology in the electromagnetic field were put forward about DC casting of Al alloys, including the fundamental research works, I.e, effects of the electromagnetic field on solidus and liquidus, macrosegregation of the main alloying elements, microstructures, content of alloying elements in grains and grain size after solidification under electromagnetic field, and also including a new process-DC casting under low frequency electromagnetic field(LFEMC), which can refine microstructure, eliminate macrosegregation, increase the content of alloying elements within grains, decrease the residual stress, avoid cracks and improve surface quality, and another new process-DC casting under low frequency electromagnetic vibration(LFEVC), which is a high effective method for grain refining.

  7. High-entropy alloy: challenges and prospects

    Directory of Open Access Journals (Sweden)

    Y.F. Ye

    2016-07-01

    Full Text Available High-entropy alloys (HEAs are presently of great research interest in materials science and engineering. Unlike conventional alloys, which contain one and rarely two base elements, HEAs comprise multiple principal elements, with the possible number of HEA compositions extending considerably more than conventional alloys. With the advent of HEAs, fundamental issues that challenge the proposed theories, models, and methods for conventional alloys also emerge. Here, we provide a critical review of the recent studies aiming to address the fundamental issues related to phase formation in HEAs. In addition, novel properties of HEAs are also discussed, such as their excellent specific strength, superior mechanical performance at high temperatures, exceptional ductility and fracture toughness at cryogenic temperatures, superparamagnetism, and superconductivity. Due to their considerable structural and functional potential as well as richness of design, HEAs are promising candidates for new applications, which warrants further studies.

  8. Environmental Studies on Titanium Aluminide Alloys

    Science.gov (United States)

    Brindley, William J.; Bartolotta, Paul A.; Smialek, James L.; Brady, Michael P.

    2005-01-01

    Titanium aluminides are attractive alternatives to superalloys in moderate temperature applications (600 to 850 C) by virtue of their high strength-to-density ratio (high specific strength). These alloys are also more ductile than competing intermetallic systems. However, most Ti-based alloys tend to degrade through interstitial embrittlement and rapid oxidation during exposure to elevated temperatures. Therefore, their environmental behavior must be thoroughly investigated before they can be developed further. The goals of titanium aluminide environmental studies at the NASA Lewis Research Center are twofold: characterize the degradation mechanisms for advanced structural alloys and determine what means are available to minimize degradation. The studies to date have covered the alpha 2 (Ti3Al), orthorhombic (Ti2AlNb), and gamma (TiAl) classes of alloys.

  9. On Silicides in High Temperature Titanium Alloys

    Directory of Open Access Journals (Sweden)

    C. Ramachandra

    1986-04-01

    Full Text Available High temperature titanium alloys like IMI 685 contain small amounts of silicon (~ 0.25 wt. per cent to improve creep resistance. Different types of silicides, namely Ti5Si3 (TiZr5Si3(S1 and (TiZr6 Si3 (S2, have been observed to precipitate in various silicon-bearing titanium alloys depending upon their composition and heat treatment. The precipitation of silicides, their orientation relationship with the matrix in different alloys, and the beneficial influence of thermo-mechanical treatment on the distribution of silicides have been pointed out. The effect of silicides on mechanical properties and fracture of the commercial alloy IMI 685 is also indicated.

  10. Low content uranium alloys for nuclear fuels

    International Nuclear Information System (INIS)

    A description is given of the structure and the properties of low content alloys containing from 0.1 to 0.5 per cent by weight of Al, Fe, Cr, Si, Mo or a combination of these elements. A study of the kinetics and of the mode of transformation has made it possible to choose the most satisfactory thermal treatment. An attempt has been made to prepare alloys suitable for an economical industrial development having a small α grain structure without marked preferential orientation, with very fine and stable precipitates as well as a high creep-resistance. The physical properties and the mechanical strength of these alloys are given for temperatures of 20 to 600 deg C. These alloys proved very satisfactory when irradiated in the form of normal size fuel elements. (authors)

  11. Ternary alloy nanocatalysts for hydrogen evolution reaction

    Indian Academy of Sciences (India)

    SOUMEN SAHA; SONALIKA VAIDYA; KANDALAM V RAMANUJACHARY; SAMUEL E LOFLAND; ASHOK K GANGULI

    2016-04-01

    Cu–Fe–Ni ternary alloys (size ∼55–80 nm) with varying compositions viz. CuFeNi (A1), CuFe2Ni (A2) and CuFeNi2 (A3) were successfully synthesized using microemulsion. It is to be noted that synthesis of nanocrystallineternary alloys with precise composition is a big challenge which can be overcome by choosing an appropriate microemulsion system. High electrocatalytic activity towards HER in alkaline medium was achieved by the formation of alloys of metals with low and high binding energies. A high value of current density (228 mA cm$^2$) at an overpotential of 545 mV was obtained for CuFeNi (A1), which is significantly high as compared to the previously reported Ni$_{59}$Cu$_{41}$ alloy catalyst.

  12. TEM of nanostructured metals and alloys

    Energy Technology Data Exchange (ETDEWEB)

    Karnthaler, H.P.; Waitz, T.; Rentenberger, C.; Mingler, B

    2004-12-15

    Nanostructuring has been used to improve the mechanical properties of bulk metals and alloys. Transmission electron microscopy (TEM) including atomic resolution is therefore appropriate to study these nanostructures; four examples are given as follows. (1) The early stages of precipitation at RT were investigated in an Al-Mg-Si alloy. By high resolution TEM it is shown that the precipitates lie on (0 0 1) planes having an ordered structure. (2) In Co alloys the fronts of martensitic phase transformations were analysed showing that the transformation strains are very small thus causing no surface relief. (3) Re-ordering and recrystallization were studied by in situ TEM of an Ni{sub 3}Al alloy being nanocrystalline after severe plastic deformation. (4) In NiTi severe plastic deformation is leading to the formation of amorphous shear bands. From the TEM analysis it is concluded that the amorphization is caused by plastic shear instability starting in the shear bands.

  13. TEM of nanostructured metals and alloys

    International Nuclear Information System (INIS)

    Nanostructuring has been used to improve the mechanical properties of bulk metals and alloys. Transmission electron microscopy (TEM) including atomic resolution is therefore appropriate to study these nanostructures; four examples are given as follows. (1) The early stages of precipitation at RT were investigated in an Al-Mg-Si alloy. By high resolution TEM it is shown that the precipitates lie on (0 0 1) planes having an ordered structure. (2) In Co alloys the fronts of martensitic phase transformations were analysed showing that the transformation strains are very small thus causing no surface relief. (3) Re-ordering and recrystallization were studied by in situ TEM of an Ni3Al alloy being nanocrystalline after severe plastic deformation. (4) In NiTi severe plastic deformation is leading to the formation of amorphous shear bands. From the TEM analysis it is concluded that the amorphization is caused by plastic shear instability starting in the shear bands

  14. Study of fluoride corrosion of nickel alloys

    Science.gov (United States)

    Gunther, W. H.; Steindler, M. J.

    1969-01-01

    Report contains the results of an investigation of the corrosion resistance of nickel and nickel alloys exposed to fluorine, uranium hexafluoride, and volatile fission product fluorides at high temperatures. Survey of the unclassified literature on the subject is included.

  15. Simulation of nuclei morphologies for binary alloy

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    We study the critical nuclei morphologies of a binary alloy by the string method. The dynamic equation of the string, connecting the metastable phase (liquid) and stable phase (solid), is governed by Helmholtz free energy for the binary alloy system at a given temperature. The stationary string through the critical nucleus (saddle point) is obtained if the relaxation time of the string is su?ciently large. The critical nucleus radius and energy barrier to nucleation of a pure alloy with isotropic interface energy in two and three dimensions are calculated, which are consistent with the classical nucleation theory. The critical nuclei morphologies are sensitive to the anisotropy strength of interface energy and interface thickness of alloy in two and three dimensions. The critical nucleus and energy barrier to nucleation become smaller if the anisotropy strength of the interface energy is increased, which means that it is much easier to form a stable nucleus if the anisotropy of the interface energy is considered.

  16. Printability of alloys for additive manufacturing.

    Science.gov (United States)

    Mukherjee, T; Zuback, J S; De, A; DebRoy, T

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  17. Towards an understanding of zirconium alloy corrosion

    International Nuclear Information System (INIS)

    A brief historical summary is given of the development of a programme for understanding the corrosion mechanisms operating for zirconium alloys. A general summary is given of the progress made, so far, in carrying through this programme. (author)

  18. Filler metal development for Hastelloy alloy XR

    International Nuclear Information System (INIS)

    In order to develop the filler metal for Hastelloy alloy XR structure with thick wall, the weldability and high temperature strength properties of Hastelloy alloy XR weldment were investigated using the filler metals, which were alloy-designed on the basis of multiple regression analysis. The former was examined through the chemical analysis in the deposited metal, bend test, FISCO cracking test, optical microscopy and hardness measurement. The latter was investigated by means of tensile and creep test. It was found from these results that the crack susceptibility in the weldment was apparent to be lowered without degrading the high temperature strength properties. Therefore, it is concluded that these filler metals possess excellent performance as the filler metal for Hastelloy alloy XR structure with thick wall. (author)

  19. Vertical solidification of dendritic binary alloys

    Science.gov (United States)

    Heinrich, J. C.; Felicelli, S.; Poirier, D. R.

    1991-01-01

    Three numerical techniques are employed to analyze the influence of thermosolutal convection on defect formation in directionally solidified (DS) alloys. The finite-element models are based on the Boussinesq approximation and include the plane-front model and two plane-front models incorporating special dendritic regions. In the second model the dendritic region has a time-independent volume fraction of liquid, and in the last model the dendritic region evolves as local conditions dictate. The finite-element models permit the description of nonlinear thermosolutal convection by treating the dendritic regions as porous media with variable porosities. The models are applied to lead-tin alloys including DS alloys, and severe segregation phenomena such as freckles and channels are found to develop in the DS alloys. The present calculations and the permeability functions selected are shown to predict behavior in the dendritic regions that qualitatively matches that observed experimentally.

  20. Printability of alloys for additive manufacturing

    Science.gov (United States)

    Mukherjee, T.; Zuback, J. S.; de, A.; Debroy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

  1. Solid solution lithium alloy cermet anodes

    Science.gov (United States)

    Richardson, Thomas J.

    2013-07-09

    A metal-ceramic composite ("cermet") has been produced by a chemical reaction between a lithium compound and another metal. The cermet has advantageous physical properties, high surface area relative to lithium metal or its alloys, and is easily formed into a desired shape. An example is the formation of a lithium-magnesium nitride cermet by reaction of lithium nitride with magnesium. The reaction results in magnesium nitride grains coated with a layer of lithium. The nitride is inert when used in a battery. It supports the metal in a high surface area form, while stabilizing the electrode with respect to dendrite formation. By using an excess of magnesium metal in the reaction process, a cermet of magnesium nitride is produced, coated with a lithium-magnesium alloy of any desired composition. This alloy inhibits dendrite formation by causing lithium deposited on its surface to diffuse under a chemical potential into the bulk of the alloy.

  2. Printability of alloys for additive manufacturing

    Science.gov (United States)

    Mukherjee, T.; Zuback, J. S.; De, A.; DebRoy, T.

    2016-01-01

    Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. The findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts. PMID:26796864

  3. Electrical resistivity of liquid noble metal alloys

    International Nuclear Information System (INIS)

    Calculations of the dependence of the electrical resistivity in liquid Ag-Au, Cu-Ag, Cu-Au binary alloys on composition are reported. The structure of the binary alloy is described as a hard sphere system. A one-parameter local pseudopotential, which incorporates s-d hybridization effects phenomenologically, is employed in the resistivity calculation. A reasonable agreement with experimental trends is observed in cases where experimental information is available. (author)

  4. Mechanical properties of magnesium casting alloys

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2007-10-01

    Full Text Available Purpose: In the following paper there have been the properties of the MCMgAl12Zn1, MCMgAl9Zn1, MCMgAl6Zn1, MCMgAl3Zn1 magnesium cast alloy as-cast state and after a heat treatment presented.Design/methodology/approach: A casting cycle of alloys has been carried out in an induction crucible furnace using a protective salt bath Flux 12 equipped with two ceramic filters at the melting temperature of 750±10ºC, suitable for the manufactured material. The following results concern sliding friction, mechanical properties, scanning microscopy.Findings: The different heat treatment kinds employed contributed to the improvement of mechanical properties of the alloy with the slight reduction of its plastic properties.Research limitations/implications: According to the alloys characteristic, the applied cooling rate and alloy additions seems to be a good compromise for mechanical properties and microstructures, nevertheless further tests should be carried out in order to examine different cooling rates and parameters of solution treatment process and aging process.Practical implications: The concrete examples of the employment of castings from magnesium alloys in the automotive industry are elements of the suspension of the front and rear axes of cars, propeller shaft tunnel, pedals, dashboards, elements of seats, steering wheels, elements of timer-distributors, air filters, wheel bands, oil sumps, elements and housings of the gearbox, framing of doors and sunroofs, and others, etc.Originality/value: Contemporary materials should possess high mechanical properties, physical and chemical, as well as technological ones, to ensure long and reliable use. The above mentioned requirements and expectations regarding the contemporary materials are met by the non-ferrous metals alloys used nowadays, including the magnesium alloys.

  5. Lightweight Protective Coatings For Titanium Alloys

    Science.gov (United States)

    Wiedemann, Karl E.; Taylor, Patrick J.; Clark, Ronald K.

    1992-01-01

    Lightweight coating developed to protect titanium and titanium aluminide alloys and titanium-matrix composite materials from attack by environment when used at high temperatures. Applied by sol-gel methods, and thickness less than 5 micrometers. Reaction-barrier and self-healing diffusion-barrier layers combine to protect titanium alloy against chemical attack by oxygen and nitrogen at high temperatures with very promising results. Can be extended to protection of other environmentally sensitive materials.

  6. Microstructure of hydroextruded niobium alloy NTs-1

    International Nuclear Information System (INIS)

    Comparative analysis of microstructure of niobium alloy NTs-1 rods, produced by hydroextrusion ad hot pressing, has been carried out. It is established, that cold hydroextrusion of electron-beam melted ingots of the alloy NTs-1, permits to attain a more heterogeneous structure in semifinished products, as compared with hot pressing. Considerable (up to 90%) deformation degree, resulting in the lowest grain heterogeneity in metal, should be used

  7. A jumping shape memory alloy under heat

    OpenAIRE

    Shuiyuan Yang; Toshihiro Omori; Cuiping Wang; Yong Liu; Makoto Nagasako; Jingjing Ruan; Ryosuke Kainuma; Kiyohito Ishida; Xingjun Liu

    2016-01-01

    Shape memory alloys are typical temperature-sensitive metallic functional materials due to superelasticity and shape recovery characteristics. The conventional shape memory effect involves the formation and deformation of thermally induced martensite and its reverse transformation. The shape recovery process usually takes place over a temperature range, showing relatively low temperature-sensitivity. Here we report novel Cu-Al-Fe-Mn shape memory alloys. Their stress-strain and shape recovery ...

  8. The constitutive modeling of shape memory alloys

    OpenAIRE

    Liang, Chen

    1990-01-01

    This dissertation presents a one-dimensional thermomechanical constitutive model for shape memory alloys based on basic concepts of thermodynamics and phase transformation kinetics. Compared with other developed constitutive relations, this thermomechanical constitutive relation not only reflects the physical essence of shape memory alloys, i.e., the martensitic phase transformation involved, but also provides an easy-to-use design tool for engineers. It can predict and describ...

  9. Transformation yield surface of shape memory alloys

    OpenAIRE

    K. Bhattacharya; Schlömerkemper, A

    2004-01-01

    Shape-memory alloys transform under stress, and this stress-induced transformation is useful for various practical applications. The stress at which the alloy transforms depends on the orientation of the stress relative to the specimen, and may be described using a transformation yield surface. This paper provides early results of a theoretical treatment of the transformation yield surface of shape-memory polycrystals with particular emphasis on the influence of texture.

  10. Investigation & Analysis of Different Aluminium Alloys t

    OpenAIRE

    Nibedita Sethi*¹,; Ajit Senapati²

    2014-01-01

    Aluminium alloy LM-29, A-356 AND A-6060 was fabricated in sand casting method. Mach inability of aluminium alloy LM-29, A-356 AND A-6060 was investigated and evaluate the mach inability studying the different parameter such as cutting force, surface roughness, chip thickness, and power consumption during turning at different cutting speed and constant depth of cut and feed rate. In this paper also studies the mechanical properties means hardness, density and tensile strength o...

  11. High damping indium-tin alloys

    OpenAIRE

    Dooris, A.; Lakes, Roderick S.; Myers, B.; Stephens, N

    2015-01-01

    This research is directed toward the development of materials of high stiffness and high mechanical damping for the purpose of damping vibrations instructures and machinery. To this end, indium-tin alloys are considered. Cast In-Sn exhibits substantial damping for a metal. Quenching substantially improved the damping of indium-tin alloy but the effect gradually disappeared due to aging. Cold work of 1.3% permanent shear strain had the effect of moderately increasing the damping of indium-tin,...

  12. Refining processes of selected copper alloys

    OpenAIRE

    S. Rzadkosz; Kranz, M; P. Nowicki; M. Piekos

    2009-01-01

    The analysis of the refining effectiveness of the liquid copper and selected copper alloys by various micro additions and special refiningsubstances – was performed. Examinations of an influence of purifying, modifying and deoxidation operations performed in a metal bath on the properties of certain selected alloys based on copper matrix - were made. Refining substances, protecting-purifying slag, deoxidation and modifying substances containing micro additions of such elements as: zirconium, ...

  13. LASER CLADDING ON ALUMINIUM BASE ALLOYS

    OpenAIRE

    Pilloz, M.; Pelletier, J; Vannes, A.; Bignonnet, A.

    1991-01-01

    laser cladding is often performed on iron or titanium base alloys. In the present work, this method is employed on aluminum alloys ; nickel or silicon are added by powder injection. Addition of silicon leads to sound surface layers, but with moderated properties, while the presence of nickel induces the formation of hard intermetallic compounds and then to an attractive hardening phenomena ; however a recovery treatment has to be carried out, in order to eliminate porosity in the near surface...

  14. Oxidation of alloys for advanced steam turbines

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R.; Covino, Bernard S., Jr.; Bullard, Sophie J.; Ziomek-Moroz, M.; Alman, David E.

    2005-01-01

    Ultra supercritical (USC) power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760°C. This research examines the steamside oxidation of advanced alloys for use in USC systems, with emphasis placed on alloys for high- and intermediate-pressure turbine sections.

  15. Oxidation of advanced steam turbine alloys

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, G.R.; Covino, B.S., Jr.; Bullard, S.J.; Ziomek-Moroz, M.

    2006-03-01

    Advanced or ultra supercritical (USC) steam power plants offer the promise of higher efficiencies and lower emissions. Current goals of the U.S. Department of Energy’s Advanced Power Systems Initiatives include coal generation at 60% efficiency, which would require steam temperatures of up to 760°C. This research examines the steamside oxidation of advanced alloys for use in USC systems, with emphasis placed on alloys for high- and intermediate-pressure turbine sections.

  16. Titanium and titanium alloys fundamentals and applications

    CERN Document Server

    Peters, Manfred

    2003-01-01

    This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

  17. Mechanical properties of tantalum-niobium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chamdawalla, N; Ettmayer, P.; Femboeck, J.; Aschenbrenner, W.; Bildstein, H.

    1986-02-01

    Young's modulus and shear modulus have been measured on fully dense polycrystalline sintered (swaged and forged and recrystallized) tantalum-niobium alloys. Young's modulus decreases steadily and monotonously from pure tantalum to pure niobium. Ultimate tensile strength values have been measured at 6 different temperatures between 20 and 1500/sup 0/ C. No significant solution hardening effect could be observed. Room temperature and hot hardness of the alloys were evaluated. (orig.).

  18. Manufacturing development of low activation vanadium alloys

    International Nuclear Information System (INIS)

    General Atomics is developing manufacturing methods for vanadium alloys as part of a program to encourage the development of low activation alloys for fusion use. The culmination of the program is the fabrication and installation of a vanadium alloy structure in the DIII-D tokamak as part of the Radiative Divertor modification. Water-cooled vanadium alloy components will comprise a portion of the new upper divertor structure. The first step, procuring the material for this program has been completed. The largest heat of vanadium alloy made to date, 1200 kg of V-4Cr-4Ti, has been produced and is being converted into various product forms. Results of many tests on the material during the manufacturing process are reported. Research into potential fabrication methods has been and continues to be performed along with the assessment of manufacturing processes particularly in the area of joining. Joining of vanadium alloys has been identified as the most critical fabrication issue for their use in the Radiative Divertor Program. Joining processes under evaluation include resistance seam, electrodischarge (stud), friction and electron beam welding. Results of welding tests are reported. Metallography and mechanical tests are used to evaluate the weld samples. The need for a protective atmosphere during different welding processes is also being determined. General Atomics has also designed, manufactured, and will be testing a helium-cooled, high heat flux component to assess the use of helium cooled vanadium alloy components for advanced tokamak systems. The component is made from vanadium alloy tubing, machined to enhance the heat transfer characteristics, and joined to end flanges to allow connection to the helium supply. Results are reported

  19. Internal gettering by metal alloy clusters

    Science.gov (United States)

    Buonassisi, Anthony; Heuer, Matthias; Istratov, Andrei A.; Pickett, Matthew D.; Marcus, Mathew A.; Weber, Eicke R.

    2010-07-27

    The present invention relates to the internal gettering of impurities in semiconductors by metal alloy clusters. In particular, intermetallic clusters are formed within silicon, such clusters containing two or more transition metal species. Such clusters have melting temperatures below that of the host material and are shown to be particularly effective in gettering impurities within the silicon and collecting them into isolated, less harmful locations. Novel compositions for some of the metal alloy clusters are also described.

  20. Layered Structures in Deformed Metals and Alloys

    DEFF Research Database (Denmark)

    Hansen, Niels; Zhang, Xiaodan; Huang, Xiaoxu

    2014-01-01

    Layered structures characterize metals and alloys deformed to high strain. The morphology is typical lamellar or fibrous and the interlamellar spacing can span several length scales down to the nanometer dimension. The layered structures can be observed in bulk or in surface regions, which is shown......-structure relationships. Finally, the results will be discussed based on universal principles for the evolution of microstructure and properties during plastic deformation of metals and alloys from low to high strain....

  1. Microstructure of undercooled Pb-Sn alloys

    OpenAIRE

    Castro Walman Benício de; Maia Manuel de Lucena; Kiminami Claudio Shyinti; Bolfarini Claudemiro

    2001-01-01

    Melt undercooling opens new solidification pathways for non-equilibrium phases and non-conventional microstructures. Several techniques, including the fluxing technique, have been developed in order to reduce nucleation sites and to produce high undercoolings for metals and alloys. In this work the fluxing technique was applied to Pb-25wt%Sn (hypoeutectic), Pb-61.9wt%Sn (eutectic) and Pb-90wt%Sn (hypereutectic) alloys to investigate the influence of the undercooling on the microstructure of t...

  2. Pulse reversal plating of nickel alloys

    DEFF Research Database (Denmark)

    Tang, Peter Torben

    2007-01-01

    ), internal stress and material distribution are even more important. With baths based upon nickel chloride, and nickel and cobalt chlorides, pulse reversal plating of both pure nickel and nickel-cobalt alloys has been used to fabricate tools for microinjection moulding. Pulse reversal plating of ternary soft...... magnetic alloys, comprising 45-65%Co, 15-35%Fe and 15-35%Ni, is also reported....

  3. Structure changes and mechanical properties of laser alloyed magnesium cast alloys

    Directory of Open Access Journals (Sweden)

    W. Kwaśny

    2009-02-01

    Full Text Available Purpose: The aim of this work was to investigate structure and mechanical properties of the MCMgAl12Zn1 casting magnesium alloys after laser treatment. The laser treatment was carried out using a high power diode laser (HPDL.Design/methodology/approach: The laser processing of TiC, WC, SiC particles in MCMgAl12Zn1 and the resulted microstructures and properties are discussed in this paper. The resulting microstructure in the modified surface layer was examined. Phase composition was determined by the X-ray diffraction method using XPert device. The measurements of hardness after laser melt injection was also studied.Findings: Structure of the solidyifying material after laser alloying is characteristic with occurrences of areas with the diversified morphology, dependent on solidification rate of the magnesium alloys, is characteristic of structure of the solidified material after laser alloying. The MCMgAl12Zn1 casting magnesium alloys after laser alloying demonstrate similar hardness tests results, in reference to hardness of the alloys before their laser treatment.Research limitations/implications: In this research three powders (titanium carbide, tungsten carbide and silicon carbide were used to reinforcing the surface of the MCMgAl12Zn1 casting magnesium alloys.Practical implications: High power diode laser can be used as an economical substitute for CO2 and Nd:YAG lasers to modify the surface magnesium alloy by feeding the carbide particles.Originality/value: The originality of this work is applying of High Power Diode Laser for laser treatment of cast magnesium alloy consisting in fusion penetration of the hard particles of titanium, tungsten, and silicon carbides into the remelted surface layer of the alloy.

  4. Nanoprecipitation in a beta-titanium alloy

    International Nuclear Information System (INIS)

    Highlights: • In-situ SANS has been applied to study precipitation in β -Ti alloy. • Rate of precipitation is far more rapid in the cold-rolled alloy than non cold-rolled. • The rapid precipitation dramatically improves the alloy hardness. • Extensive ω phase is present after 400 °C/16 h heat-treatment. • SANS modelling and TEM-EDX shows the precipitates are Ti rich. - Abstract: This paper represents the first application of small angle neutron scattering (SANS) to the study of precipitate nucleation and growth in β-Ti alloys in an attempt to observe both the precipitation process in-situ and to quantify the evolving microstructure that affects mechanical behaviour. TEM suggests that athermal ω can be induced by cold-rolling Gum metal, a β-Ti alloy. During thermal exposure at 400°C, isothermal ω particles precipitate at a greater rate in cold-rolled material than in the recovered, hot deformed state. SANS modelling is consistent with disc shaped nanoparticles, with length and radius under 6nm after thermal exposures up to 16h. Modelling suggests that the nanoprecipitate volume fraction and extent of Nb partitioning to the β matrix is greater in the cold-rolled material than the extruded. The results show that nucleation and growth of the nanoprecipitates impart strengthening to the alloy

  5. Hydrogen storage systems from waste Mg alloys

    Science.gov (United States)

    Pistidda, C.; Bergemann, N.; Wurr, J.; Rzeszutek, A.; Møller, K. T.; Hansen, B. R. S.; Garroni, S.; Horstmann, C.; Milanese, C.; Girella, A.; Metz, O.; Taube, K.; Jensen, T. R.; Thomas, D.; Liermann, H. P.; Klassen, T.; Dornheim, M.

    2014-12-01

    The production cost of materials for hydrogen storage is one of the major issues to be addressed in order to consider them suitable for large scale applications. In the last decades several authors reported on the hydrogen sorption properties of Mg and Mg-based systems. In this work magnesium industrial wastes of AZ91 alloy and Mg-10 wt.% Gd alloy are used for the production of hydrogen storage materials. The hydrogen sorption properties of the alloys were investigated by means of volumetric technique, in situ synchrotron radiation powder X-ray diffraction (SR-PXD) and calorimetric methods. The measured reversible hydrogen storage capacity for the alloys AZ91 and Mg-10 wt.% Gd are 4.2 and 5.8 wt.%, respectively. For the Mg-10 wt.% Gd alloy, the hydrogenated product was also successfully used as starting reactant for the synthesis of Mg(NH2)2 and as MgH2 substitute in the Reactive Hydride Composite (RHC) 2LiBH4 + MgH2. The results of this work demonstrate the concrete possibility to use Mg alloy wastes for hydrogen storage purposes.

  6. Initial cytotoxicity of novel titanium alloys.

    Science.gov (United States)

    Koike, M; Lockwood, P E; Wataha, J C; Okabe, T

    2007-11-01

    We assessed the biological response to several novel titanium alloys that have promising physical properties for biomedical applications. Four commercial titanium alloys [Super-TIX(R) 800, Super-TIX(R) 51AF, TIMETAL(R) 21SRx, and Ti-6Al-4V (ASTM grade 5)] and three experimental titanium alloys [Ti-13Cr-3Cu, Ti-1.5Si and Ti-1.5Si-5Cu] were tested. Specimens (n = 6; 5.0 x 5.0 x 3.0 mm(3)) were cast in a centrifugal casting machine using a MgO-based investment and polished to 600 grit, removing 250 mum from each surface. Commercially pure titanium (CP Ti: ASTM grade 2) and Teflon (polytetrafluoroethylene) were used as positive controls. The specimens were cleaned and disinfected, and then each cleaned specimen was placed in direct contact with Balb/c 3T3 fibroblasts for 72 h. The cytotoxicity [succinic dehydrogenase (SDH) activity] of the extracts was assessed using the MTT method. Cytotoxicity of the metals tested was not statistically different compared to the CP Ti and Teflon controls (p > 0.05). These novel titanium alloys pose cytotoxic risks no greater than many other commonly used alloys, including commercially pure titanium. The promising short-term biocompatibility of these Ti alloys is probably due to their excellent corrosion resistance under static conditions, even in biological environments. PMID:17385227

  7. Nanoprecipitation in a beta-titanium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Coakley, James, E-mail: j.coakley06@imperial.ac.uk [Department of Materials, Imperial College, South Kensington, London SW7 2AZ, England (United Kingdom); Vorontsov, Vassili A. [Department of Materials, Imperial College, South Kensington, London SW7 2AZ, England (United Kingdom); Littrell, Kenneth C. [Oak Ridge National Laboratory, Chemical and Engineering Materials Division, Oak Ridge, TN 37831 (United States); Heenan, Richard K. [Rutherford Appleton Laboratory, Didcot, Oxon OX11 0QX, England (United Kingdom); Ohnuma, Masato [Laboratory of Quantum Beam System Engineering, Hokkaido University, Sapporo 060-0808 (Japan); Jones, Nicholas G. [Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB2 3QZ, England (United Kingdom); Dye, David [Department of Materials, Imperial College, South Kensington, London SW7 2AZ, England (United Kingdom)

    2015-02-25

    Highlights: • In-situ SANS has been applied to study precipitation in β -Ti alloy. • Rate of precipitation is far more rapid in the cold-rolled alloy than non cold-rolled. • The rapid precipitation dramatically improves the alloy hardness. • Extensive ω phase is present after 400 °C/16 h heat-treatment. • SANS modelling and TEM-EDX shows the precipitates are Ti rich. - Abstract: This paper represents the first application of small angle neutron scattering (SANS) to the study of precipitate nucleation and growth in β-Ti alloys in an attempt to observe both the precipitation process in-situ and to quantify the evolving microstructure that affects mechanical behaviour. TEM suggests that athermal ω can be induced by cold-rolling Gum metal, a β-Ti alloy. During thermal exposure at 400°C, isothermal ω particles precipitate at a greater rate in cold-rolled material than in the recovered, hot deformed state. SANS modelling is consistent with disc shaped nanoparticles, with length and radius under 6nm after thermal exposures up to 16h. Modelling suggests that the nanoprecipitate volume fraction and extent of Nb partitioning to the β matrix is greater in the cold-rolled material than the extruded. The results show that nucleation and growth of the nanoprecipitates impart strengthening to the alloy.

  8. Development of Advanced Alloys using Fullerenes

    Science.gov (United States)

    Sims, J.; Wasz, M.; O'Brien, J.; Callahan, D. L.; Barrera, E. V.

    1994-01-01

    Development of advanced alloys using fullerenes is currently underway to produce materials for use in the extravehicular mobility unit (EMU). These materials will be directed toward commercial usages as they are continually developed. Fullerenes (of which the most common is C(sub 60)) are lightweight, nanometer size, hollow molecules of carbon which can be dispersed in conventional alloy systems to enhance strength and reduce weight. In this research, fullerene interaction with aluminum is investigated and a fullerene-reinforced aluminum alloy is being developed for possible use on the EMU. The samples were manufactured using standard commercial approaches including powder metallurgy and casting. Alloys have been processed having 1.3, 4.0 and 8.0 volume fractions of fullerenes. It has been observed that fullerene dispersion is related to the processing approach and that they are stable for the processing conditions used in this research. Emphasis will be given to differential thermal analysis and wavelength dispersive analysis of the processed alloys. These two techniques are particularly useful in determining the condition of the fullerenes during and after processing. Some discussion will be given as to electrical properties of fullerene-reinforced materials. Although the aluminum and other advanced alloys with fullerenes are being developed for NASA and the EMU, the properties of these materials will be of interest for commercial applications where specific Dual-Use will be given.

  9. Crystallization of amorphous Zr-Be alloys

    Science.gov (United States)

    Golovkova, E. A.; Surkov, A. V.; Syrykh, G. F.

    2015-02-01

    The thermal stability and structure of binary amorphous Zr100 - x Be x alloys have been studied using differential scanning calorimetry and neutron diffraction over a wide concentration range (30 ≤ x ≤ 65). The amorphous alloys have been prepared by rapid quenching from melt. The studied amorphous system involves the composition range around the eutectic composition with boundary phases α-Zr and ZrBe2. It has been found that the crystallization of alloys with low beryllium contents ("hypoeutectic" alloys with x ≤ 40) proceeds in two stages. Neutron diffraction has demonstrated that, at the first stage, α-Zr crystallizes and the remaining amorphous phase is enriched to the eutectic composition; at the second stage, the alloy crystallizes in the α-Zr and ZrBe2 phases. At higher beryllium contents ("hypereutectic" alloys), one phase transition of the amorphous phase to a mixture of the α-Zr and ZrBe2 phases has been observed. The concentration dependences of the crystallization temperature and activation energy have been revealed.

  10. Lubricated sliding wear behaviour of aluminium alloy composites

    OpenAIRE

    J. C. Walker; Rainforth, W. M.; Jones, H.

    2005-01-01

    Interest in aluminium alloy (Al-alloy) composites as wear resistant materials continues to grow. However, the use of the popular Al-alloy-SiC composite can be limited by the abrasive nature of the SiC, leading to increased counterface wear rates. This study reports new Al-alloy composites that offer high wear resistance, to a level similar to Al-alloy-SiC. Aluminium alloy (2124, 5056) matrix composites reinforced by nominally 15 vol.% of Cr3Si, MoSi2, Ni3Al and SiC particles were prepared by ...

  11. Study of fatigue behaviour of 7475 aluminium alloy

    Indian Academy of Sciences (India)

    B B Verma; J D Atkinson; M Kumar

    2001-04-01

    Fatigue properties of a thermomechanically treated 7475 aluminium alloy have been studied in the present investigation. The alloy exhibited superior fatigue life compared to conventional structural aluminium alloys and comparable stage II crack growth rate. It was also noticed that the fatigue crack initiated from a surface grain and the crack extension was dominated by ductile striations. Analysis also revealed that this alloy possessed fracture toughness and tensile properties superior to that noticed with other structural aluminium alloys. Therefore the use of this alloy can safely reduce the overall weight of the aircraft.

  12. Study on microstructure and properties of Mg-alloy surface alloying layer fabricated by EPC

    Directory of Open Access Journals (Sweden)

    Chen Dongfeng

    2010-02-01

    Full Text Available AZ91D surface alloying was investigated through evaporative pattern casting (EPC technology. Aluminum powder (0.074 to 0.104 mm was used as the alloying element in the experiment. An alloying coating with excellent properties was fabricated, which mainly consisted of adhesive, co-solvent, suspending agent and other ingredients according to desired proportion. Mg-alloy melt was poured under certain temperature and the degree of negative pressure. The microstructure of the surface layer was examined by means of scanning electron microscopy. It has been found that a large volume fraction of network new phases were formed on the Mg-alloy surface, the thickness of the alloying surface layer increased with the alloying coating increasing from 0.3 mm to 0.5 mm, and the microstructure became compact. Energy dispersive X-ray (EDX analysis was used to determine the chemical composition of the new phases. It showed that the new phases mainly consist of β-Mg17Al12, in addition to a small quantity of inter-metallic compounds and oxides. A micro-hardness test and a corrosion experiment to simulate the effect of sea water were performed. The result indicated that the highest micro-hardness of the surface reaches three times that of the matrix. The corrosion rate of alloying samples declines to about a fifth of that of the as-cast AZ91D specimen.

  13. AN ELECTROPLATING METHOD OF FORMING PLATINGS OF NICKEL, COBALT, NICKEL ALLOYS OR COBALT ALLOYS

    DEFF Research Database (Denmark)

    1997-01-01

    An electroplating method of forming platings of nickel, cobalt, nickel alloys or cobalt alloys with reduced stresses in an electrodepositing bath of the type: Watt's bath, chloride bath or a combination thereof, by employing pulse plating with periodic reverse pulse and a sulfonated naphthalene...

  14. Oxidation resistant coating for titanium alloys and titanium alloy matrix composites

    Science.gov (United States)

    Brindley, William J. (Inventor); Smialek, James L. (Inventor); Rouge, Carl J. (Inventor)

    1992-01-01

    An oxidation resistant coating for titanium alloys and titanium alloy matrix composites comprises an MCrAlX material. M is a metal selected from nickel, cobalt, and iron. X is an active element selected from Y, Yb, Zr, and Hf.

  15. Corrosion Behavior of Au, Hastelloy C-276 Alloy and Monel 400 Alloy in Molten Lithium Fluoride

    Institute of Scientific and Technical Information of China (English)

    WANG; Chang-shui; GUO; Jun-kang

    2013-01-01

    For searching better corrosion-resistant material in high temperature,we investigated the corrosion behavior of Au,Haynes C-276 alloy and Monel 400 alloy in molten lithium fluoride at 950℃.The corrosion products and fine structures of the corroded specimens were characterized by inductively coupled plasma mass spectrometry(ICP-MS),scanning electron microscope(SEM),energy dispersive

  16. Effect of alloying addition and microstructural parameters on mechanical properties of 93% tungsten heavy alloys

    International Nuclear Information System (INIS)

    Liquid phase sintering, heat treatment and swaging studies on three tungsten heavy alloys, 93W–4.9Ni–2.1Fe (wt%), 93W–4.2Ni–1.2Fe–1.6Co (wt%) and 93W–4.9Ni–1.9Fe–0.2Re (wt%) were carried out in detail with respect to microstructure, tensile and impact properties. All the alloys were sintered and swaged to 40% deformation. The results indicate that Re addition reduces the grain size of the alloy compared to W–Ni–Fe and W-Ni-Fe-Co alloys. W–Ni–Fe–Re alloy shows superior tensile properties in heat treated condition as compared to W–Ni–Fe and W–Ni–Fe–Co alloys. SEM study of fractured specimens clearly indicates that the failure in case of W–Ni–Fe–Re was due to transgranular cleavage of tungsten grains and W–W de-cohesion. W–Ni–Fe and W–Ni–Fe–Co alloys also failed by mixed mode failure. However, in these cases, ductile dimples corresponding the failure of the matrix phase was rarely seen. Thermo-mechanical processing resulted in significant changes in mechanical properties. While W–Ni–Fe–Re alloy showed the highest tensile strength (1380 MPa), W–Ni–Fe–Co exhibited the highest elongation (12%) to failure. A detailed analysis involving microstructure, mechanical properties and failure behavior was undertaken in order to understand the property trends

  17. Effect of alloy elements on the anti-corrosion properties of low alloy steel

    Indian Academy of Sciences (India)

    Baorong Hou; Yantao Li; Yanxu Li; Jinglei Zhang

    2000-06-01

    Effect of alloy elements on corrosion of low alloy steel was studied under simulated offshore conditions. The results showed that the elements Cu, P, Mo, W, V had evident effect on corrosion resistance in the atmosphere zone; Cu, P, V, Mo in the splash zone and Cr, Al, Mo in the submerged zone.

  18. Effect of alloying addition and microstructural parameters on mechanical properties of 93% tungsten heavy alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ravi Kiran, U., E-mail: uravikiran@gmail.com [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058 (India); Panchal, A.; Sankaranarayana, M. [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058 (India); Nageswara Rao, G.V.S. [National Institute of Technology, Warangal 506004 (India); Nandy, T.K. [Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058 (India)

    2015-07-29

    Liquid phase sintering, heat treatment and swaging studies on three tungsten heavy alloys, 93W–4.9Ni–2.1Fe (wt%), 93W–4.2Ni–1.2Fe–1.6Co (wt%) and 93W–4.9Ni–1.9Fe–0.2Re (wt%) were carried out in detail with respect to microstructure, tensile and impact properties. All the alloys were sintered and swaged to 40% deformation. The results indicate that Re addition reduces the grain size of the alloy compared to W–Ni–Fe and W-Ni-Fe-Co alloys. W–Ni–Fe–Re alloy shows superior tensile properties in heat treated condition as compared to W–Ni–Fe and W–Ni–Fe–Co alloys. SEM study of fractured specimens clearly indicates that the failure in case of W–Ni–Fe–Re was due to transgranular cleavage of tungsten grains and W–W de-cohesion. W–Ni–Fe and W–Ni–Fe–Co alloys also failed by mixed mode failure. However, in these cases, ductile dimples corresponding the failure of the matrix phase was rarely seen. Thermo-mechanical processing resulted in significant changes in mechanical properties. While W–Ni–Fe–Re alloy showed the highest tensile strength (1380 MPa), W–Ni–Fe–Co exhibited the highest elongation (12%) to failure. A detailed analysis involving microstructure, mechanical properties and failure behavior was undertaken in order to understand the property trends.

  19. Bond strength of gold alloys laser welded to cobalt-chromium alloy.

    Science.gov (United States)

    Watanabe, Ikuya; Wallace, Cameron

    2008-01-01

    The objective of this study was to investigate the joint properties between cast gold alloys and Co-Cr alloy laser-welded by Nd:YAG laser. Cast plates were fabricated from three types of gold alloys (Type IV, Type II and low-gold) and a Co-Cr alloy. Each gold alloy was laser-welded to Co-Cr using a dental laser-welding machine. Homogeneously-welded and non-welded control specimens were also prepared. Tensile testing was conducted and data were statistically analyzed using ANOVA. The homogeneously-welded groups showed inferior fracture load compared to corresponding control groups, except for Co-Cr. In the specimens welded heterogeneously to Co-Cr, Type IV was the greatest, followed by low-gold and Type II. There was no statistical difference (Pcontrol and that welded to Co-Cr. Higher elongations were obtained for Type II in all conditions, whereas the lowest elongation occurred for low-gold welded to Co-Cr. This study indicated that, of the three gold alloys tested, the Type IV gold alloy was the most suitable alloy for laser-welding to Co-Cr. PMID:19088892

  20. Magnesium Cermets and Magnesium-Beryllium Alloys

    International Nuclear Information System (INIS)

    The paper describes some results of work on the development of magnesium-magnesium oxide cermets and of super heat-resistant magnesiumberyllium alloys produced by powder metallurgical methods. The introduction of even a minute quantity of finely dispersed magnesium oxide into magnesium results in a strengthening of the material, the degree of which increases with increased magnesium oxide concentration, although variation of this concentration within the limits of 0.3 to 5 wt.% has a comparatively slight effect on the corresponding variation in the short-term strength over the whole range of temperatures investigated. At 20oC, in the case of the cermets, σβ = 28 to 31 kg/mm2 and δ = 3 .5 to 4.5%; at 500oC σβ = 2.6 to 3.2 kg/mm2 and δ =30 to 40%. The positive effect of the finely dispersed oxide phase is particularly evident in protracted tests. For magnesium cermets, σ (300)/100 = 2.2 kg/mm2. Characteristic of the mixtures is the high thermal stability of the strength properties, linked chiefly with the thermodynamic stability of the strength-giving oxide phase in the metal matrix. The use of powder metallurgical methods has yielded super heat-resistant magnesium-beryllium alloys containing heightened concentrations of beryllium (PMB alloys). In their strength characteristics PMB alloys are close to Mg-MgO cermets, but the magnesium-beryllium alloys have a degree and duration of resistance to high temperature oxidation which exceeds the corresponding qualities of the magnesium alloys at present known. Thus, in air of 580oC, PMB alloys with 2 to 5% beryllium maintain a high resistance to oxidation for a period of over 12000 to 14000 h. This long-term heat resistance is chiefly a result of the amount of beryllium in the alloy, and increases with increasing beryllium content. PMB alloys are also marked by high resistance to short bursts of overheating. Magnesium cermets and magnesium-beryllium alloys, with their enhanced high-temperature stability, are capable

  1. Densities of Some Low Melting Plutonium Alloys

    International Nuclear Information System (INIS)

    The change in fuel density with temperature is an important parameter in nuclear reactor design. For molten fuels, such as are used in LAMPRE-type reactor it is also necessary to know the volume change on melting. A volumeter employing NaK as a working fluid was used to obtain'these data for various plutonium and cerium base alloys over the range 25-800°C. Cerium and several low-melting binary cerium alloys were studied with this equipment. Cerium, Ce-Co, Ce-Ni, and Ce-Cu alloys all exhibit an increase in density on melting, while a Ce-Mn alloy expands on melting. The melting temperatures of several of these alloys differ from those reported in the literature, and the compositions of several eutectics in these systems are also reported incorrectly. The densities of unstabilized and gallium- stabilized plutonium and Pu-10 at.% Fe were measured and compared over this temperature range. All these materials expand on freezing. At 675°C, molten unstabilized plutonium is approximately 2% more dense than Pu-l wt.% Ga alloy. Molten Pu-Fe alloy containing 0.2 wt.% Ga at 435°C is 0.8% less dense than unstabilized alloy. This indicates that there is short-range ordering of plutonium atoms by gallium in the liquid state. The materials containing gallium melted over a 20°C temperature range, while the unstabilized materials melted sharply. Pu-Co-Ce alloys containing 3, 5, 6.2 and 8 g Pu/cm3 were investigated. They all melt in the range 425-442°C and expand on freezing. This expansion increases with increasing plutonium content from 1.3% for the 3 g Pu/cm3 alloy to 3% for the 8 g Pu/cm3 material. Manganese additions to this fuel system are being studied in an attempt to reduce this expansion on freezing. (author)

  2. Influence of alloying elements and microstructure on the formation of hydrotalcite film on Mg alloys

    International Nuclear Information System (INIS)

    Highlights: • A hydrotalcite film has been formed on Al-free Mg alloys by in situ growth method. • The influence of alloying elements on the composition of the films is discussed. • The role of microstructure in the formation of hydrotalcite film is illustrated. - Abstract: The influence of alloying elements and microstructure of Mg substrates on the formation of hydrotalcite film has been investigated. It is found that the two-step process is also available for the pure Mg and other alloys after modification. A small amount of Zn does not impact the composition of the hydrotalcite film much; whereas the highly active rare earth (RE) affects the constituents of the precursor film as well as the final film on WE54 alloy significantly. The microstructure impacts the initial nucleation and the film morphology depending on the size and chemical activity of the intermetallic particles

  3. Plasma surface alloying of titanium alloy for enhancing burn-resistant property

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ping-ze; XU Zhong; ZHANG Gao-hui; HE Zhi-yong; YAO Zheng-jun

    2006-01-01

    Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, burn-resistant alloying layers were made on the surface of Ti-6Al-4V and Ti-6.5Al-0.3Mo-1.5Zr-0.25Si titanium alloys by using double glow plasma surface alloying technology (DG Technology). Two typical burn-resistant layers Ti-Cr and Ti-Mo were made by DG plasma chromizing and DG plasma molybdenizing, respectively. Burn-resistant properties were tested by layer ignition method using 2 kW laser machine. Ignition experiments result reveals that the ignition temperature of alloyed layer with Mo and Cr concentration above 10% is about 200℃ higher than ignition temperature of Ti-6Al-4V substrate.

  4. Alloy development for irradiation performance. Quarterly progress report for period ending December 31, 1980

    International Nuclear Information System (INIS)

    Progress is reported in eight sections: analysis and evaluation studies, test matrices and test methods development, Path A Alloy Development (austenitic stainless steels), Path C Alloy Development (Ti and V alloys), Path D Alloy Development (Fe alloys), Path E Alloy Development (ferritic steels), irradiation experiments and materials inventory, and materials compatibility and hydrogen permeation studies

  5. Alloy development for irradiation performance. Quarterly progress report for period ending December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress is reported in eight sections: analysis and evaluation studies, test matrices and test methods development, Path A Alloy Development (austenitic stainless steels), Path C Alloy Development (Ti and V alloys), Path D Alloy Development (Fe alloys), Path E Alloy Development (ferritic steels), irradiation experiments and materials inventory, and materials compatibility and hydrogen permeation studies. (DLC)

  6. Cleanliness of Alloying Structural Steel

    Institute of Scientific and Technical Information of China (English)

    YU Hui-xiang; WANG Xin-hua; ZHANG Jing; LI Hai-bo; WANG Wan-jun

    2011-01-01

    Alloying structural steel used for mechanical structures has a high requirement for cleanliness because its failures are greatly affected by non-metallic inclusions and total oxygen content in steel.It has been reported by some steelmaking plants to have some problems in controlling total oxygen content and inclusions during alloying structural steel production.For this purpose,cleanliness control in 0.2C-0.3Si-0.6Mn-1Cr-0.2Mo steel was investigated.Firstly,low melting temperature zone(≤1873 K) of CaO-Al2O3-MgO system and formation condition of low melting temperature inclusions were investigated through thermodynamic equilibrium calculation.On this basis,industrial tests were carried out.Through sampling at different stages,transformation of oxide inclusions and change of total oxygen content in steel were studied.The results show that:in order to form CaO-Al2O3-MgO system inclusions with low melting temperature,mass percent of Al2O3,MgO and CaO in inclusions should be controlled from 37.6% to 70.8%,0 to 17.4% and 25.5% to 60.6%;For the condition of 1873 K and 0.05%(mass percent) dissolved aluminum in steel,the activities of dissolved oxygen,magnesium and calcium should be controlled as 0.298×10-4-2×10-4,0.1×10-5-40×10-5 and 0.8×10-8-180×10-8 respectively.With secondary refining proceeding,average total oxygen content and inclusion amount decrease,the type of most inclusions changes from Al2O3 after tapping to Al2O3-MgO after top slag is formed during ladle furnace refining and finally to CaO-Al2O3-MgO after RH treatment.In the final products,average total oxygen content was 12.7×10-6 and most inclusions were in spherical shape with size less than 5 μm.

  7. Iron - based bulk amorphous alloys

    Directory of Open Access Journals (Sweden)

    R. Babilas

    2010-07-01

    Full Text Available Purpose: The paper presents a structure characterization, thermal and soft magnetic properties analysis of Fe-based bulk amorphous materials in as-cast state and after crystallization process. In addition, the paper gives some brief review about achieving, formation and structure of bulk metallic glasses as a special group of amorphous materials.Design/methodology/approach: The studies were performed on Fe72B20Si4Nb4 metallic glass in form of ribbons and rods. The amorphous structure of tested samples was examined by X-ray diffraction (XRD, transmission electron microscopy (TEM and scanning electron microscopy (SEM methods. The thermal properties of the glassy samples were measured using differential thermal analysis (DTA and differential scanning calorimetry (DSC. The magnetic properties contained initial and maximum magnetic permeability, coercive force and magnetic after-effects measurements were determined by the Maxwell-Wien bridge and VSM methods.Findings: The X-ray diffraction and transmission electron microscopy investigations revealed that the studied as-cast bulk metallic glasses in form of ribbons and rods were amorphous. Two stage crystallization process was observed for studied bulk amorphous alloy. The differences of crystallization temperature between ribbons and rods with chosen thickness are probably caused by different amorphous structures as a result of the different cooling rates in casting process. The SEM images showed that studied fractures could be classified as mixed fractures with indicated two zones contained “river” and “smooth” areas. The changing of chosen soft magnetic properties (μr, Bs, Hc obtained for samples with different thickness is a result of the non-homogenous amorphous structure of tested metallic glasses. The annealing process in temperature range from 373 to 773 K causes structural relaxation of tested amorphous materials, which leads to changes in their physical properties. The qualitative

  8. Modification of the titanium alloy surface in electroexplosive alloying with boron carbide and subsequent electron-beam treatment

    International Nuclear Information System (INIS)

    The modification of the VT6 titanium alloy surface in electroexplosion alloying with plasma being formed in titanium foil with a weighed powder of boron carbide with subsequent irradiation by a pulsed electron beam has been carried out. An electroexplosive alloying zone of a thickness up to 50 μm with a gradient structure is found to form. The subsequent electron-beam treatment of the alloying zone results in smoothing of the alloying surface and is accompanied by the formation of the multilayer structure with alternating layers of various alloying degree at a depth of 30 μm

  9. Modification of the titanium alloy surface in electroexplosive alloying with boron carbide and subsequent electron-beam treatment

    Energy Technology Data Exchange (ETDEWEB)

    Gromov, Victor E., E-mail: gromov@physics.sibsiu.ru; Budovskikh, Evgeniy A., E-mail: budovskikh-ea@physics.sibsiu.ru; Bashchenko, Lyudmila P., E-mail: gromov@physics.sibsiu.ru; Kobzareva, Tatyana Yu., E-mail: gromov@physics.sibsiu.ru; Semin, Alexander P., E-mail: gromov@physics.sibsiu.ru [Siberian State Industrial University, Novokuznetsk, 654007 (Russian Federation); Ivanov, Yurii F., E-mail: yufi55@mail.ru [Institute of High Current Electronics SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk State University, Tomsk, 634050 (Russian Federation); Wang, Xinli, E-mail: wangxl520@hotmail.com [Northeastern University, Liaoning, Shenyang 110819 China (China)

    2015-10-27

    The modification of the VT6 titanium alloy surface in electroexplosion alloying with plasma being formed in titanium foil with a weighed powder of boron carbide with subsequent irradiation by a pulsed electron beam has been carried out. An electroexplosive alloying zone of a thickness up to 50 μm with a gradient structure is found to form. The subsequent electron-beam treatment of the alloying zone results in smoothing of the alloying surface and is accompanied by the formation of the multilayer structure with alternating layers of various alloying degree at a depth of 30 μm.

  10. Modification of the titanium alloy surface in electroexplosive alloying with boron carbide and subsequent electron-beam treatment

    Science.gov (United States)

    Gromov, Victor E.; Budovskikh, Evgeniy A.; Ivanov, Yurii F.; Bashchenko, Lyudmila P.; Wang, Xinli; Kobzareva, Tatyana Yu.; Semin, Alexander P.

    2015-10-01

    The modification of the VT6 titanium alloy surface in electroexplosion alloying with plasma being formed in titanium foil with a weighed powder of boron carbide with subsequent irradiation by a pulsed electron beam has been carried out. An electroexplosive alloying zone of a thickness up to 50 μm with a gradient structure is found to form. The subsequent electron-beam treatment of the alloying zone results in smoothing of the alloying surface and is accompanied by the formation of the multilayer structure with alternating layers of various alloying degree at a depth of 30 μm.

  11. The influence of alloy composition on residual stresses in heat treated aluminium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, J.S., E-mail: jeremy.robinson@ul.ie [Department of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick (Ireland); Redington, W. [Materials and Surface Science Institute, University of Limerick (Ireland)

    2015-07-15

    The as quenched properties of eight different heat treatable aluminium alloys are related to residual stress magnitudes with the objective being to establish if there is a relationship between the residual stress and the as quenched alloy hardness and strength. Near surface residual stresses were assessed with X-ray diffraction using both the established sin{sup 2}ψ method and the more recent cos α technique. Through thickness residual stresses were also characterised using neutron diffraction. The alloys were chosen to encompass a wide range of strengths. The low to medium strength alloys were 6060 and 6082, medium to high strength 2618A, 2014A, 7075, 7010 and two variants of 7449, while the very high strength alloy was the powder metallurgy alloy N707. To assess the as quenched strength, dynamic hardness and tensile properties were determined from samples tested immediately after quenching to minimise the influence of precipitation hardening by natural aging. In addition, hot hardness measurements were made in situ on samples cooled to simulate quench paths. Within the experimental constraints of the investigation, the distribution of residual stress through the thickness was found to follow the same pattern for all the alloys investigated, varying from tensile in the interior to surface compression. The influence of alloy strength was manifested as a change in the observed residual stress magnitudes, and surface residual stresses were found to vary linearly with as quenched hardness and strength. - Highlights: • As quenched aluminium alloys contain high magnitude residual stresses. • Surface is compressive balance by a tensile core. • As quenched surface residual stress is linear function of alloy strength. • In situ hot hardness demonstrates rapid change in intrinsic hardness during rapid cooling.

  12. The influence of alloy composition on residual stresses in heat treated aluminium alloys

    International Nuclear Information System (INIS)

    The as quenched properties of eight different heat treatable aluminium alloys are related to residual stress magnitudes with the objective being to establish if there is a relationship between the residual stress and the as quenched alloy hardness and strength. Near surface residual stresses were assessed with X-ray diffraction using both the established sin2ψ method and the more recent cos α technique. Through thickness residual stresses were also characterised using neutron diffraction. The alloys were chosen to encompass a wide range of strengths. The low to medium strength alloys were 6060 and 6082, medium to high strength 2618A, 2014A, 7075, 7010 and two variants of 7449, while the very high strength alloy was the powder metallurgy alloy N707. To assess the as quenched strength, dynamic hardness and tensile properties were determined from samples tested immediately after quenching to minimise the influence of precipitation hardening by natural aging. In addition, hot hardness measurements were made in situ on samples cooled to simulate quench paths. Within the experimental constraints of the investigation, the distribution of residual stress through the thickness was found to follow the same pattern for all the alloys investigated, varying from tensile in the interior to surface compression. The influence of alloy strength was manifested as a change in the observed residual stress magnitudes, and surface residual stresses were found to vary linearly with as quenched hardness and strength. - Highlights: • As quenched aluminium alloys contain high magnitude residual stresses. • Surface is compressive balance by a tensile core. • As quenched surface residual stress is linear function of alloy strength. • In situ hot hardness demonstrates rapid change in intrinsic hardness during rapid cooling

  13. High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance

    Science.gov (United States)

    Hofstetter, J.; Becker, M.; Martinelli, E.; Weinberg, A. M.; Mingler, B.; Kilian, H.; Pogatscher, S.; Uggowitzer, P. J.; Löffler, J. F.

    2014-04-01

    This article deals with the development of fine-grained high-strength low-alloy (HSLA) magnesium alloys intended for use as biodegradable implant material. The alloys contain solely low amounts of Zn and Ca as alloying elements. We illustrate the development path starting from the high-Zn-containing ZX50 (MgZn5Ca0.25) alloy with conventional purity, to an ultrahigh-purity ZX50 modification, and further to the ultrahigh-purity Zn-lean alloy ZX10 (MgZn1Ca0.3). It is shown that alloys with high Zn-content are prone to biocorrosion in various environments, most probably because of the presence of the intermetallic phase Mg6Zn3Ca2. A reduction of the Zn content results in (Mg,Zn)2Ca phase formation. This phase is less noble than the Mg-matrix and therefore, in contrast to Mg6Zn3Ca2, does not act as cathodic site. A fine-grained microstructure is achieved by the controlled formation of fine and homogeneously distributed (Mg,Zn)2Ca precipitates, which influence dynamic recrystallization and grain growth during hot forming. Such design scheme is comparable to that of HSLA steels, where low amounts of alloying elements are intended to produce a very fine dispersion of particles to increase the material's strength by refining the grain size. Consequently our new, ultrapure ZX10 alloy exhibits high strength (yield strength R p = 240 MPa, ultimate tensile strength R m = 255 MPa) and simultaneously high ductility (elongation to fracture A = 27%), as well as low mechanical anisotropy. Because of the anodic nature of the (Mg,Zn)2Ca particles used in the HSLA concept, the in vivo degradation in a rat femur implantation study is very slow and homogeneous without clinically observable hydrogen evolution, making the ZX10 alloy a promising material for biodegradable implants.

  14. Oxidation and volatilization of a niobium alloy

    International Nuclear Information System (INIS)

    This report presents the findings from a preliminary investigation into oxidation and volatilization characteristics of a niobium alloy. Niobium is a candidate alloy for use in plasma facing components (PFCS) in experimental fusion reactors like the Intemational Thermonuclear Experimental Reactor (ITER). An experimental alloy was tailored to simulate small changes in chemistry which could result from transmutations from irradiation. The alloy was exposed in air and steam between 800 degree C and 1200 degree C. Volatilized products and hydrogen were collected and measured. Post-test examinations were also performed on the samples to determine the amount of material loss during the exposures. The obtained measurements of volatilization flux (g/m2-s), hydrogen generation rates (liters/m2-s), and recession rates (mm/s) are data which can be used for safety analyses and material performance to predict consequences which may result from an accident involving the ingress of air or steam into the plasma chamber of fusion reactor. In our volatility tests, only molybdenum and niobium were found at release levels above the detection limit. Although molybdenum is present at only 0.12 wt%, the quantities of this element volatilized in air are nearly comparable to the quantities of niobium released. The niobium release in steam is only three to four times higher than that of molybdenum in steam. The hydrogen production of the niobium alloy is compared with other PFC materials that we have tested, specifically, beryllium, graphite, and a tunesten alloy. At high temperatures, the hydrogen production rate of the niobium alloy is among the lowest of these materials, significantly lower than beryllium. To understand what this means in an accident situation, modeling is necessary to predict temperatures, and therefore total hydrogen production. The INEL is currently doing this modeling

  15. Dislocation dynamics in SiGe alloys

    Science.gov (United States)

    Yonenaga, I.

    2013-11-01

    The dislocation velocities and mechanical strength of bulk crystals of SixGe1-x alloys grown by the Czochralski method have been investigated by the etch pit technique and compressive deformation tests, respectively. Velocity of dislocations in the SiGe alloys of the composition range 0.004 < x < 0.08 decreases monotonically with an increase in Si content at temperature 450-700°C and under stress 3-24MPa. In contrast, velocity of dislocations in the composition range 0.92 < x < 1 first increases, then decreases and again increases with a decrease in Si content at temperature 750-850°C and under stress 3-30MPa. The velocity of dislocations was quantitatively evaluated as functions of stress and temperature. Stress-strain behaviour in the yield region of the SiGe alloys of composition 0 < x < 0.4 is similar to that of Ge at temperatures lower than about 600°C. However, the yield stress becomes temperature-insensitive at high temperatures and increases with increasing Si content. The stress-strain curves of the SiGe alloys of composition 0.95 < x < 1 are similar to those of pure Si at temperatures 800-1000°C and the yield stress increases with decreasing Si content down to x = 0.95. The yield stress of the SiGe alloys is dependent on the composition, being proportional to x(1-x), showing a maximum around x ≈ 0.5. Built-in stress fields related to local fluctuation of the alloy composition and the dynamic development of a solute atmosphere around the dislocations, may suppress the activities of dislocations and lead to the hardening of SiGe alloys.

  16. Dislocation dynamics in SiGe alloys

    International Nuclear Information System (INIS)

    The dislocation velocities and mechanical strength of bulk crystals of SixGe1−x alloys grown by the Czochralski method have been investigated by the etch pit technique and compressive deformation tests, respectively. Velocity of dislocations in the SiGe alloys of the composition range 0.004 < x < 0.08 decreases monotonically with an increase in Si content at temperature 450–700°C and under stress 3–24MPa. In contrast, velocity of dislocations in the composition range 0.92 < x < 1 first increases, then decreases and again increases with a decrease in Si content at temperature 750-850°C and under stress 3–30MPa. The velocity of dislocations was quantitatively evaluated as functions of stress and temperature. Stress-strain behaviour in the yield region of the SiGe alloys of composition 0 < x < 0.4 is similar to that of Ge at temperatures lower than about 600°C. However, the yield stress becomes temperature-insensitive at high temperatures and increases with increasing Si content. The stress-strain curves of the SiGe alloys of composition 0.95 < x < 1 are similar to those of pure Si at temperatures 800–1000°C and the yield stress increases with decreasing Si content down to x = 0.95. The yield stress of the SiGe alloys is dependent on the composition, being proportional to x(1−x), showing a maximum around x ≈ 0.5. Built-in stress fields related to local fluctuation of the alloy composition and the dynamic development of a solute atmosphere around the dislocations, may suppress the activities of dislocations and lead to the hardening of SiGe alloys

  17. Advances of Titanium Alloys and Its Biological Surface Modification

    Institute of Scientific and Technical Information of China (English)

    XU Ke-wei; HUANG Ping

    2004-01-01

    This paper reviews the past, present and future of surface modification of titanium alloy from the point of view of preparation of hard tissue replacement implants. The development of titanium alloy is also described.

  18. Multi-functional magnesium alloys containing interstitial oxygen atoms.

    Science.gov (United States)

    Kang, H; Choi, H J; Kang, S W; Shin, S E; Choi, G S; Bae, D H

    2016-01-01

    A new class of magnesium alloys has been developed by dissolving large amounts of oxygen atoms into a magnesium lattice (Mg-O alloys). The oxygen atoms are supplied by decomposing titanium dioxide nanoparticles in a magnesium melt at 720 °C; the titanium is then completely separated out from the magnesium melt after solidification. The dissolved oxygen atoms are located at the octahedral sites of magnesium, which expand the magnesium lattice. These alloys possess ionic and metallic bonding characteristics, providing outstanding mechanical and functional properties. A Mg-O-Al casting alloy made in this fashion shows superior mechanical performance, chemical resistance to corrosion, and thermal conductivity. Furthermore, a similar Mg-O-Zn wrought alloy shows high elongation to failure (>50%) at room temperature, because the alloy plastically deforms with only multiple slips in the sub-micrometer grains (alloys are expected to open a new paradigm in commercial alloy design. PMID:26976372

  19. Ti-V-Mn based alloys for hydrogen compression system

    Energy Technology Data Exchange (ETDEWEB)

    Dehouche, Z. [Institut de Recherche sur l' hydrogene, Universite du Quebec a Trois-Rivieres, C.P. 500, Trois-Rivieres, Que., G9A 5H7 (Canada)]. E-mail: zahir_dehouche@uqtr.ca; Savard, M. [Institut de Recherche sur l' hydrogene, Universite du Quebec a Trois-Rivieres, C.P. 500, Trois-Rivieres, Que., G9A 5H7 (Canada); Laurencelle, F. [Institut de Recherche sur l' hydrogene, Universite du Quebec a Trois-Rivieres, C.P. 500, Trois-Rivieres, Que., G9A 5H7 (Canada); Goyette, J. [Institut de Recherche sur l' hydrogene, Universite du Quebec a Trois-Rivieres, C.P. 500, Trois-Rivieres, Que., G9A 5H7 (Canada)

    2005-09-01

    Ti-V-Mn based hydrides are one family of alloys with improved hydrogenation properties and they have a great potential to replace the AB{sub 5} alloys as the sorption materials in hydrogen compression systems, although there still are many problems associated with their use, including unstable reversible hydrogen capacity and unfavorable thermodynamic properties. To gain a better understanding on the effect of the substitution elements and to optimize the alloy composition for high storage capacity, the influence of the alloy stoichiometry was investigated. Ti-Zr-V-Mn alloys were prepared by arc melting technique and were annealed in vacuum at temperature above 900 deg. C to obtain great sorption properties. Hydrogen absorption and desorption kinetics and PCT characteristics of these alloys at ambient temperature were measured and compared. These hydrogen storage features were also discussed in relation to the effect of alloy element compositions. Ti-Zr-V-Mn alloy cycling behavior was also examined.

  20. Ti-V-Mn based alloys for hydrogen compression system

    International Nuclear Information System (INIS)

    Ti-V-Mn based hydrides are one family of alloys with improved hydrogenation properties and they have a great potential to replace the AB5 alloys as the sorption materials in hydrogen compression systems, although there still are many problems associated with their use, including unstable reversible hydrogen capacity and unfavorable thermodynamic properties. To gain a better understanding on the effect of the substitution elements and to optimize the alloy composition for high storage capacity, the influence of the alloy stoichiometry was investigated. Ti-Zr-V-Mn alloys were prepared by arc melting technique and were annealed in vacuum at temperature above 900 deg. C to obtain great sorption properties. Hydrogen absorption and desorption kinetics and PCT characteristics of these alloys at ambient temperature were measured and compared. These hydrogen storage features were also discussed in relation to the effect of alloy element compositions. Ti-Zr-V-Mn alloy cycling behavior was also examined

  1. Measurement and analyses of molten Ni-Co alloy density

    Institute of Scientific and Technical Information of China (English)

    XIAO Feng; K. MUKAI; FANG Liang; FU Ya; YANG Ren-hui

    2006-01-01

    With the advent of powerful mathematical modeling techniques for material phenomena, there is renewed interest in reliable data for the density of the Ni-based superalloys. Up to now, there has been few report on the density of molten Ni-Co alloy.In order to obtain more accurate density data for molten Ni-Co alloy, the density of molten Ni-Co alloy was measured with a modified sessile drop method, and the accommodation of different atoms in molten Ni-Co alloy was analyzed. The density of alloy is found to decrease with increasing temperature and Co concentration in the alloy. The molar volume of molten Ni-Co alloy increases with increasing Co concentration. The molar volume of Ni-Co alloy determined shows a positive deviation from the linear molar volume, and the deviation of molar volume from ideal mixing increases with increasing Co concentration over the experimental concentration range.

  2. Density of Ni-Cr Alloy in the Mushy State

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The density of Ni-Cr alloy in the mushy state has been measured using the modified sessile drop method. The density of Ni-Cr alloy in the mushy state was found to decrease with increasing temperature and Cr concentration in alloy.The molar volume of Ni-Cr alloy in the mushy state therefore increases with increasing the Cr concentration in alloy.The ratio of the difference of density divided by the temperature difference between liquidus and solidus temperatures decreases with increasing Cr concentration. The density of the alloy increased with the precipitation of a solid phase in alloy during the solidification process. The temperature dependence of the density of alloy in the mushy state was not linear but biquadratic.

  3. Recent progress on gas tungsten arc welding of vanadium alloys

    International Nuclear Information System (INIS)

    This is a progress report on a continuing research project to acquire a fundamental understanding of the metallurgical processes in the welding of vanadium alloys. It also has the goal of developing techniques for welding structural vanadium alloys. The alloy V-4Cr-4Ti is used as a representative alloy of the group; it is also the prime candidate vanadium alloy for the U.S. Fusion Program at the present time. However, other alloys of this class were used in the research as necessary. The present work focuses on recent findings of hydrogen embrittlement found in vanadium alloy welds. It was concluded that the atmosphere in the inert gas glove box was insufficient for welding 6mm thick vanadium alloy plates

  4. The Origin of the Name "Onion's Fusible Alloy"

    Science.gov (United States)

    Jensen, William B.

    2010-01-01

    In response to a reader query, this article traces the history of fusible alloys, including Newton's metal, D'Arcet's metal, Rose's metal, Onion's fusible alloy, and Wood's metal. (Contains 1 table and 1 figure.)

  5. STRUCTURE FORMATION OF ALLOYS ON IRON BASIS AFTER LASER ALLOYING

    Directory of Open Access Journals (Sweden)

    О. V. Diachenko

    2016-01-01

    Full Text Available The paper is devoted to investigations on influence of laser treatment regimes of gas-thermal and adhesive coatings from self-fluxing powders on iron basis and after melting with modifying plaster on their roughness and phase composition. One of mathematical planning methods that is a complete factor experiment method has been used for investigation of parameters’ influence on micro-geometry of coatings. The executed investigations have made it possible to observe a general regularity which does not depend on a type of alloying plaster: while increasing speed of laser beam relatively to treated part, beam diameter value of Ra parameter is becoming less. Decrease in height of surface irregularities in case of increasing laser beam speed is related with intensification of evaporation processes. An increase in beam diameter diminishes Ra parameter of the surface. This is due to the fact that decrease in power density occurs at high rate of beam defocusing. Overlapping coefficient does not exert a pronounced effect on Ra parameter of fused coatings. While increasing the speed of laser beam relatively to the part structure is transferred from dendrite into supersaturated one with carbide and boride precipitations. It has been established that technological parameters of laser treatment and particularly speed of laser beam influence on coating composition. While increasing the speed up to v5 = 5 × 10–3 m/s amount of chromium has become larger by 1.5-fold that resulted in increase of micro-hardness of the coating from 9.5–10.1 GPa up to 11.04–15.50 GPa.

  6. Vanadium alloys - overview and recent results

    Science.gov (United States)

    Muroga, T.; Nagasaka, T.; Abe, K.; Chernov, V. M.; Matsui, H.; Smith, D. L.; Xu, Z.-Y.; Zinkle, S. J.

    2002-12-01

    This paper reviews recent progress in research on vanadium alloys with emphasis on V-4Cr-4Ti as a reference composition. New high purity V-4Cr-4Ti ingots and products (NIFS-HEATs) were made. The improved purity of the alloys made a practical demonstration of enhanced feasibility of recycling as a method of handling after use in fusion reactors. Significant progress has been made in the understanding of physical metallurgy of V-4Cr-4Ti and effects of O, N and C on the alloy properties such as low and high temperature mechanical properties, welding properties and low temperature irradiation effects, by means of including the comparison of various large heats and model alloys with different impurity levels. The effects of other trace impurities on some of the properties are also discussed. Other current efforts to characterize V-4Cr-4Ti, to improve its properties and to explore advanced vanadium alloys are reviewed. Issues remaining for the future investigations are discussed.

  7. Ion-induced surface modification of alloys

    International Nuclear Information System (INIS)

    In addition to the accumulation of the implanted species, a considerable number of processes can affect the composition of an alloy in the surface region during ion bombardment. Collisions of energetic ions with atoms of the alloy induce local rearrangement of atoms by displacements, replacement sequences and by spontaneous migration and recombination of defects within cascades. Point defects form clusters, voids, dislocation loops and networks. Preferential sputtering of elements changes the composition of the surface. At temperatures sufficient for thermal migration of point defects, radiation-enhanced diffusion promotes alloy component redistribution within and beyond the damage layer. Fluxes of interstitials and vacancies toward the surface and into the interior of the target induce fluxes of alloying elements leading to depth-dependent compositional changes. Moreover, Gibbsian surface segregation may affect the preferential loss of alloy components by sputtering when the kinetics of equilibration of the surface composition becomes competitive with the sputtering rate. Temperature, time, current density and ion energy can be used to influence the individual processes contributing to compositional changes and, thus, produce a rich variety of composition profiles near surfaces. 42 references

  8. A jumping shape memory alloy under heat

    Science.gov (United States)

    Yang, Shuiyuan; Omori, Toshihiro; Wang, Cuiping; Liu, Yong; Nagasako, Makoto; Ruan, Jingjing; Kainuma, Ryosuke; Ishida, Kiyohito; Liu, Xingjun

    2016-02-01

    Shape memory alloys are typical temperature-sensitive metallic functional materials due to superelasticity and shape recovery characteristics. The conventional shape memory effect involves the formation and deformation of thermally induced martensite and its reverse transformation. The shape recovery process usually takes place over a temperature range, showing relatively low temperature-sensitivity. Here we report novel Cu-Al-Fe-Mn shape memory alloys. Their stress-strain and shape recovery behaviors are clearly different from the conventional shape memory alloys. In this study, although the Cu-12.2Al-4.3Fe-6.6Mn and Cu-12.9Al-3.8Fe-5.6Mn alloys possess predominantly L21 parent before deformation, the 2H martensite stress-induced from L21 parent could be retained after unloading. Furthermore, their shape recovery response is extremely temperature-sensitive, in which a giant residual strain of about 9% recovers instantly and completely during heating. At the same time, the phenomenon of the jumping of the sample occurs. It is originated from the instantaneous completion of the reverse transformation of the stabilized 2H martensite. This novel Cu-Al-Fe-Mn shape memory alloys have great potentials as new temperature-sensitive functional materials.

  9. Explosive compaction of CuCr alloys

    Institute of Scientific and Technical Information of China (English)

    李金平; 罗守靖; 龚朝晖; 牛玮; 纪松

    2002-01-01

    The production of CuCr alloys utilizing explosive compaction was studied. Mixture powders of CuCr alloys placed in tubes with a dimension of d14.0mm×21.4mm can be compacted using explosive pads of 16.5mm or 22.5mm. Thicker pads of explosive make the compacts more porous. The effects of the ratio of me/mp, ratio of me/(mp+mt) and impact energy on the density of compacts were similar, they were chosen to control explosive compaction, respectively. When adequate value of the parameters me/mp, me/(mt+mp) and impact energy of unit area of tube was chosen, high density(7.858g/cm3), high hardness(HB189) and low conductance (13.6MS/m) of CuCr alloys could be made by explosive compaction. The general properties of CuCr alloys by explosive compaction are similar to those of CuCr alloys by traditional process.

  10. Amorphous Alloy Surpasses Steel and Titanium

    Science.gov (United States)

    2004-01-01

    In the same way that the inventions of steel in the 1800s and plastic in the 1900s sparked revolutions for industry, a new class of amorphous alloys is poised to redefine materials science as we know it in the 21st century. Welcome to the 3rd Revolution, otherwise known as the era of Liquidmetal(R) alloys, where metals behave similar to plastics but possess more than twice the strength of high performance titanium. Liquidmetal alloys were conceived in 1992, as a result of a project funded by the California Institute of Technology (CalTech), NASA, and the U.S. Department of Energy, to study the fundamentals of metallic alloys in an undercooled liquid state, for the development of new aerospace materials. Furthermore, NASA's Marshall Space Flight Center contributed to the development of the alloys by subjecting the materials to testing in its Electrostatic Levitator, a special instrument that is capable of suspending an object in midair so that researchers can heat and cool it in a containerless environment free from contaminants that could otherwise spoil the experiment.

  11. Microstructure Evolution of a Multifunctional Titanium Alloy

    Science.gov (United States)

    Tian, Yu Xing; Hao, Yu Lin

    2016-03-01

    To optimize both mechanical and functional properties of multifunctional titanium alloys via grain refinement, an example of such alloys termed as Ti2448 is adopted to investigate its microstructure evolution and strain rate sensitivity by compression in the single β-phase field. The results show that flow stress and strain rate follow a bilinear relation, which is in sharp contrast with other metallic materials exhibiting a monotonic linearity. Below the critical strain of 1 s-1, the alloy has a normal strain rate sensitivity factor of 0.265. Above the critical value, its hardening rate is ultra-low with a factor of 0.03. Inspite of ultra-low hardening, the alloy is plastic stable under the tested conditions. With the aid of electron back-scattering diffraction and transmission electron microscopy analyses, microstructure evolution via several mechanisms such as dynamic recovery and recrystallization is evaluated by quantitative measurements of grain misorientation and its distribution, sub-grain formation, and localized grain refinement. These results are helpful to obtain the homogenous ultrafine-grained alloy by multi-step thermo-mechanical processing.

  12. Fermi surface effects in terbium alloys

    International Nuclear Information System (INIS)

    Work is reported which was conducted to test of the relation of the generalized susceptibility (and therefore, the ordering properties) for Tb to the Fermi energy of Tb. In order to properly analyze the data a simple theory was developed to account for the effects on band structure which accompany alloying and attendant lattice size changes. Using this simple theory, the alloys of Tb with Mg are understood as a combination of Fermi energy lowering and of lattice contraction. The tendency of Th to promote the ferromagnetic structure in Th is understood as a combination of the Fermi energy being raised and of the lattice being expanded. The theory was also useful in explaining the interesting behavior of the Tb with Yb alloys which upon preliminary analysis did not seem to follow the theoretical predictions. After consideration of the volume effect, indeed the Tb with Yb alloys showed promotion of the helical structure as predicted. The complicated behavior of the Tb with Yb alloys is a case where the volume and valence effects compete. Results show that the magnetic ordering properties of the rare earths are intimately related to the Fermi surface geometry through the generalized susceptibility

  13. Hydrogen interactions in aluminum-lithium alloys

    Science.gov (United States)

    Smith, S. W.; Scully, J. R.

    1991-01-01

    A program is described which seeks to develop an understanding of the effects of dissolved and trapped hydrogen on the mechanical properties of selected Al-Li-Cu-X alloys. A proposal is made to distinguish hydrogen (H2) induced EAC from aqueous dissolution controlled EAC, to correlate H2 induced EAC with mobile and trapped concentrations, and to identify significant trap sites and hydride phases (if any) through use of model alloys and phases. A literature review shows three experimental factors which have impeded progress in the area of H2 EAC for this class of alloys. These are as listed: (1) inter-subgranular fracture in Al-Li alloys when tested in the S-T orientation in air or vacuum make it difficult to readily detect H2 induced fracture based on straight forward changes in fractography; (2) the inherently low H2 diffusivity and solubility in Al alloys is further compounded by a native oxide which acts as a H2 permeation barrier; and (3) H2 effects are masked by dissolution assisted processes when mechanical testing is performed in aqueous solutions.

  14. The effect of remelting various combinations of new and used cobalt-chromium alloy on the mechanical properties and microstructure of the alloy

    Directory of Open Access Journals (Sweden)

    Sharad Gupta

    2012-01-01

    Conclusion: Repeated remelting of base metal alloy for dental casting without addition of new alloy can affect the mechanical properties of the alloy. Microstructure analysis shows deterioration upon remelting. However, the addition of 25% and 50% (by weight of new alloy to the remelted alloy can bring about improvement both in mechanical properties and in microstructure.

  15. Microstructure and Aging of Powder-Metallurgy Al Alloys

    Science.gov (United States)

    Blackburn, L. B.

    1987-01-01

    Report describes experimental study of thermal responses and aging behaviors of three new aluminum alloys. Alloys produced from rapidly solidified powders and contain 3.20 to 5.15 percent copper, 0.24 to 1.73 percent magnesium, 0.08 to 0.92 percent iron, and smaller amounts of manganese, nickel, titanium, silicon, and zinc. Peak hardness achieved at lower aging temperatures than with standard ingot-metallurgy alloys. Alloys of interest for automobile, aircraft, and aerospace applications.

  16. Atomic scale modelling of hexagonal structured metallic fission product alloys

    OpenAIRE

    Middleburgh, S. C.; King, D M; Lumpkin, G. R.

    2015-01-01

    Noble metal particles in the Mo-Pd-Rh-Ru-Tc system have been simulated on the atomic scale using density functional theory techniques for the first time. The composition and behaviour of the epsilon phases are consistent with high-entropy alloys (or multi-principal component alloys)—making the epsilon phase the only hexagonally close packed high-entropy alloy currently described. Configurational entropy effects were considered to predict the stability of the alloys with increasing temperature...

  17. Experience with ferrosilicoaluminum alloy during deoxidation of steel

    Directory of Open Access Journals (Sweden)

    A. Mekhtiyev

    2015-10-01

    Full Text Available The article describes the process of deoxidation quiet and low-alloyed steel alloy ferrosilicoaluminum complex in comparison the existing, and with steel deoxidation technology with conventional alloys - ferrosilicon and secondary aluminum. A comparative analysis of quality steel, non-metallic inclusions metallographic studies and studies of the mechanical properties of the resulting steel was done. On a large array of experimental steel proved cost-effectiveness and feasibility of ferrosilicoaluminum during deoxidation quiet and low-alloyed steel.

  18. Microalloying with Cd of Antifriction Sn-Sb-Cu Alloys

    OpenAIRE

    Cinca Ionel Lupinca; Constantin Marta; Attila Szabo

    2012-01-01

    In the case of bimetallic sliding linings with superior technological characteristics, the use of an antifriction ally is imposed an alloy of the type Sn-Sb-Cu, which possesses a high adherence to the steel stand and a high durability in exploitation. For this reason we use the microalloying of the antifriction alloy with cadmium. The microalloying with Cd of antifriction alloys Sn-Sb-Cu determines an increase of the adhesion property of the antifriction alloy on the steel ...

  19. The corrosion resistance of two non-noble alloys

    OpenAIRE

    Capelo, Sofia; Fernandes, JCS; Proença, L.; Fonseca, ITE

    2013-01-01

    Nickel-chromium and cobalt-chromium alloys are commonly used for crown and bridge castings. These non-noble dental alloys are much cheaper than noble dental alloys but on the other hand they have disadvantages related to their lower corrosion resistance and corrosion products (released ions), some of them recognized as toxic ions that may cause allergies and other oral pathologies. Therefore it is important to evaluate the corrosion behaviour of such alloys. This study aims to evaluate the...

  20. Effect of Microstructure on the Performance of Corrosion Resistant Alloys

    OpenAIRE

    Kishan Roodbari, Marzieh

    2015-01-01

    Corrosion by pitting in aluminum alloys is a very complex process that can be affected by various factors such as chemical composition and microstructure of the alloys. The electrochemistry and distribution of second phases populating the alloy are the main factors that significantly influence the corrosion of aluminum alloys. The purpose of the present work is to contribute to a deeper understanding of how the chemical composition and microstructure affect the ability of an al...

  1. Possibilities of mechanical properties and microstructure improvement of magnesium alloys

    OpenAIRE

    I. Juřička; L.A. Dobrzański; L. Čižek; Kocich, R.; M. Greger

    2007-01-01

    Purpose: Magnesium alloys are the very progressive materials whereon is due to improve their end-useproperties, which . Especially, wrought Mg alloys attract attention since they have more advantageous mechanicalproperties than cast Mg alloys.Design/methodology/approach: The presented article shows some specific physical-metallurgicalcharacteristics of magnesium alloys of the AZ91 kind after hot forming. Special attention has been focused onthe analysis of mutual relations existing between th...

  2. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    OpenAIRE

    KANDEMİR, Kudret; A. Çetin CAN

    2003-01-01

    Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and appl...

  3. POTENTIAL USE OF MAGNESIUM ALLOYS FOR THE AUTOMOTIVE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kudret KANDEMİR

    2003-01-01

    Full Text Available Recently, there is a high interest in using lightweight materials for automotive applications where weight reduction and improvement in comfort are needed. Magnesium alloys with excellent specific strength and stiffness properties can be comparable with steel and aluminum alloys for applications in the automotive industry. For this reason, the properties of magnesium alloys are in the focus of research. This study aims at reviewing and evaluating the prospects of magnesium alloys use and applications in the automotive industry.

  4. The development of low-activation alloys at ORNL

    International Nuclear Information System (INIS)

    The objective of this program is to advance the technology of reduced-activation ferritic steels, austenitic stainless steels, and vanadium alloys to the point where these alloys could be considered as the structural material for fusion reactors in preference to the conventional high-activation alloys; and develop alloys to meet US Nuclear Regulatory Commission 10CFR61 guidelines for shallow land burial. 20 figs., 1 tab

  5. The Progress on Laser Surface Modification Techniques of Titanium Alloy

    Institute of Scientific and Technical Information of China (English)

    LIANG Cheng; PAN Lin; Al Ding-fei; TAO Xi-qi; XIA Chun-huai; SONG Yan

    2004-01-01

    Titanium alloy is widely used in aviation, national defence, automobile, medicine and other fields because of their advantages in lower density, corrosion resistance, and fatigue resistance etc. As titanium alloy is higher friction coefficients, weak wear resistance, bad high temperature oxidation resistance and lower biocompatibility, its applications are restricted. Using laser surface modification techniques can significantly improve the surface properties of titanium alloy. a review is given for progress on laser surface modification techniques of titanium alloy in this paper.

  6. Softening Behaviour of Selected Commercially Pure Aluminium Model Alloys

    OpenAIRE

    Sande, Gunnar

    2012-01-01

    A characterization of the softening behaviour of four different commercially pure aluminium alloys has been carried out. The work is related to the MOREAL project (Modelling towards value-added recycling friendly aluminium alloys), where the main goal is to quantify the effect of the elements in recyclable aluminium alloys on microstructure and mechanical properties during thermo-mechanical processing. Typical elements are iron (Fe), silicon (Si) and manganese (Mn), and the alloys studied in ...

  7. Evaluation of Ti-Cr-Cu alloys for dental applications

    Science.gov (United States)

    Koike, Marie; Okabe, Toru; Itoh, Masayuki; Okuno, Osamu; Kimura, Kohei; Takeda, Osamu; Okabe, Toru H.

    2005-12-01

    This study examined the characteristics of as-cast Ti-Cr(7 19%)-Cu(3 7%) (all percentages in this article are mass%) alloys to evaluate their suitability for dental applications; studies on the alloy structures and mechanical properties, grindability, and corrosion behavior were included in the investigation. The alloys were centrifugally cast and bench-cooled in investment molds. The x-ray diffractometry of the as-cast alloys bench-cooled in the molds indicated the following phases: α+β+ω in the 7% Cr and 7% Cr+3% Cu; β+ω in the 13%Cr; and β in the 13%Cr+3% Cu through the 19%Cr+3% Cu alloys. The strengths of the binary β Ti-Cr and ternary β Ti-Cr-Cu alloys with 13 and 19% Cr were approximately two times higher than those of CP Ti. The alloy ductility was dependent on the chemical composition and thus, the microstructure. The 7% Cr alloys were extremely brittle and hard due to the ω phase, but the ductility was restored in the 13 and 19% Cr alloys. The hardness (HV) of the cast 13 and 19% Cr alloys was approximately 300 350 compared with a value of 200 for CP Ti. The grindability of the cast alloys was examined using a rotating SiC wheel at speeds (circumferential) of 500 and 1250 m/min. At the higher speed, the grindability of the 13 and 19% Cr alloys increased with the Cu content. The grindability of the 13% Cr alloy with 7% Cu was similar to that of CP Ti. Evaluation of the corrosion behavior in an artificial saliva revealed that the alloys are like many other titanium alloys within the normal intraoral oxidation potential. The wear resistance testing of these alloys also showed favorable results.

  8. Microstructures and properties of aluminum die casting alloys

    Energy Technology Data Exchange (ETDEWEB)

    M. M. Makhlouf; D. Apelian; L. Wang

    1998-10-01

    This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.

  9. Shape-Memory-Alloy Actuator For Flight Controls

    Science.gov (United States)

    Barret, Chris

    1995-01-01

    Report proposes use of shape-memory-alloy actuators, instead of hydraulic actuators, for aerodynamic flight-control surfaces. Actuator made of shape-memory alloy converts thermal energy into mechanical work by changing shape as it makes transitions between martensitic and austenitic crystalline phase states of alloy. Because both hot exhaust gases and cryogenic propellant liquids available aboard launch rockets, shape-memory-alloy actuators exceptionally suited for use aboard such rockets.

  10. Magnetoresistance Measurements on Electrodeposited Cox Cu1-x Alloy Films

    OpenAIRE

    BAKKALOŽLU, Ömer F.

    2001-01-01

    Cox Cu1-x alloy films were prepared by using electrodeposition technique. The variations of Co and Cu contents of the films were investigated as functions of bath pH and Co content. The compositions of the alloy films were determined using an atomic absorption spectrophotometer. The crystal structures of the alloy films were analyzed using a Cu (K a )-X-ray diffractometer. The diffraction lines observed were only those of copper component in the alloy films. All three films showed...

  11. Galvanic aspects of aluminum sacrificial anode alloys in seawater.

    OpenAIRE

    Cummings, Jon Richard

    2012-01-01

    Galvanic aspects of aluminum sacrificial anode alloys in artificial seawater were investigated. Specifically, two mercury-bearing alloys and one tin-bearing alloy were studied. The polarization behavior of the aluminum sacrificial anode alloys coupled to HY-80 steel is discussed. Current versus time curves were obtained for aluminum/steel galvanic couples immersed in artificial seawater for specific intervals. Scanning elecron microscopy was used to characterize the anode dissolution patt...

  12. Evolution of Hydrogen Storage Alloys Prepared by Special Methods

    Institute of Scientific and Technical Information of China (English)

    Guo Hong; Zhang Ximin; Jing Hai; Li Chengdong; Xu Jun

    2004-01-01

    Microstructure characteristics and electrochemical properties of hydrogen storage alloys prepared by gas atomization, melt spinning and strip casting respectively were outlined.The advantages, disadvantages and research development of the above methods for preparing hydrogen storage alloys were explained.The strip casting is a new special means for preparing AB5 rare earth hydrogen storage alloys of high performance and low cost, and the study of the strip casting for preparing hydrogen storage alloys is presented specially.

  13. Alloy element redistribution during sintering of powder metallurgy steels

    OpenAIRE

    Tahir, Abdul Malik

    2014-01-01

    Homogenization of alloying elements is desired during sintering of powder metallurgy components. The redistribution processes such as penetration of liquid phase into the interparticle/grain boundaries of solid particles and subsequent solid-state  diffusion of alloy element(s) in the base powder, are important for the effective homogenization of alloy element(s) during liquid phase sintering of the mixed powders. The aim of this study is to increase the understanding of alloy element redistr...

  14. NEW METHOD OF PRODUCTION OF ALUNINUM SILICON ALLOYS

    OpenAIRE

    V. K. Afanasiev; E. L. Marukovich; M. N. Churik; V. V. Gertsen; A. V. Gorshenin; A. A. Samon

    2015-01-01

    A new approach to the preparation of aluminum-silicon alloys, based on the concept of the leading role of hydrogen in determining the structure and properties of alloys consists in using as charge materials of silicon dioxide (silica) and hydrogen instead of crystalline silicon was described. Practical ways to implement the new method were proposed on the example of industrial alloys prepared on charge synthetic alloy. It is shown that the application of the proposed method allows to improve ...

  15. Superconducting transition temperature of metastable, crystalline lead-bismuth alloys

    International Nuclear Information System (INIS)

    The increase of the superconducting temperature by ion implantation with bismuth-ions in a saturated lead-bismuth alloy, by recoil-implantation and by quenching of a lead-bismuth alloy with bismuth precipitates was studied. At room-temperature an increase of 11 at% Bi over the thermodynamic solution limit in a lead-bismuth alloy could be measured. The highest superconducting temperature was 9.02 K for a lead-bismuth alloy with 43 at% bismuth. (orig.)

  16. NUCLEATION RATE OF DIAMOND FILMS ON WC-Co ALLOYS

    OpenAIRE

    SHA LIU

    2005-01-01

    Diamond-coated hard alloys are prospective tool materials for extreme cutting conditions. Nucleation rate is one of important factors that affect the qualities of diamond thin films on WC-Co alloys. However, theoretical reports on nucleation rate of diamond films on WC-Co alloys are scarce. Combining the unique diamond strong orientation with substrate surface properties, an improved theoretical formula on nucleation rate of diamond films on the WC-Co alloys is deduced in this paper. First, t...

  17. [Casting of dental alloys with special reference to the bonding capacity of Ni-Cr alloys].

    Science.gov (United States)

    Weber, H

    1979-07-01

    A short review on castability of dental alloys -- for which a definition is proposed -- reflects the different factors influencing the results of a casting. In this case solid sieves and plates are cast by use of one gold-base alloy (Type III) and two base metal alloys used for porcelain veneering. All three alloys filled the sieve pattern to a 100%, whereas they performed differently when cast as thin, solid squares. The most continuous results were achieved with a Ni-Cr-alloy whose melting temperature can be recognized since the ingots flow together when this point is reached. Since the plate pattern is most difficult to cast due to surface to bulk ratio it is assumed that a complete casting can only be achieved when the performance of the alloy is good and all required conditions match. Thus, this type of test seems to be suitable to determine the castability of a dental alloy. The sieve test should be used to investigate and to improve the influence of the different factors as for example burnout time and temperature of the mold and sprue size. PMID:380961

  18. Laser surface alloying fabricated porous coating on NiTi shape memory alloy

    Institute of Scientific and Technical Information of China (English)

    ZHANG Song; ZHANG Chun-hua; MAN Hau-chung; LIU Chang-sheng

    2007-01-01

    Laser surface alloying technique was applied to fabricate a metallic porous coating on a solid NiTi shape memory alloy. By laser surface alloying a 40%TiH2-60%NiTi powder mixture on the surface of NiTi alloy using optimized laser process parameters, a porous but crack-free NiTi layer can be fabricated on the NiTi substrate. The porous coating is metallurgically bonded to the substrate NiTi alloy. The pores are uniformly distributed and are interconnected with each other in the coating. An average pore size of less than 10 μm is achieved. The Ni content of the porous layer is much less than that of the original NiTi surface. The existence of the porous coating on the NiTi alloy causes a 37% reduction of the tensile strength and 55% reduction of the strain as compared with the NiTi alloy. Possible biomedical or other applications for this porous surface with good mechanical strength provided by the substrate are prospective.

  19. Fabrication and characterization of niobium based Fe-Cr alloys via mechanical alloying

    International Nuclear Information System (INIS)

    Niobium (Nb) based alloys and composites are currently used in various high temperature applications such as rocket engine nozzles, superconducting magnets, and automotive structural components. Niobium has also been traditionally employed as a micro-alloying element to fabricate high strength, low alloy steels and nickel based superalloys (example: Inconel 718) on account of its ability to form nano dispersions/precipitates which effectively impede high temperature grain growth. Traditionally, niobium alloys such as C-103 (Nb-10Hf-1Ti) and FS-85 (Nb-10W-28Ta-1Zr) having excellent high temperature properties have been fabricated using arc melting and e-beam melting methods. However these alloys have not been widely used on account of their high fabrication costs. On the other hand, nanostructured steels such as oxide dispersion strengthened (ODS) alloys (example: 12Y1, 12YWT, FeCrAl, HT-9, Hestalloy etc) are being proposed for high temperature structural applications for new generation nuclear reactors. In this context we present some of the work related to fabrication and characterization of some known ODS steel compositions with Nb as a micro-alloying element that is currently underway at the High Temperature Materials Laboratory at Virginia Commonwealth University in context of high temperature nuclear applications. (author)

  20. Effect of alloy composition on the volume fraction of beta phase in duplex titanium alloys

    International Nuclear Information System (INIS)

    Titanium alloys are strong, light, corrosion resistant and superplastic. While many of them show superplastic behavior, working and forging temperatures are still high, 850-925 degree C, and their range is narrow. Moreover, the material's resistance to deformation is not negligible and, therefore, the cost of making dies and presses for forging or hot deformation is high and it poses a serious problem. To increase the efficiency and to reduce the temperature of hot deformation, increasing the volume fraction of the beta phase present in duplex titanium alloys is suggested. With the introduction of the beta-modified Ti-6Al-4V alloy the decrease in the temperature and the increase in the strain rate of the superplastic regime promise to make superplastic forming of this alloy even more economical, and many researches have been made. In this study, efforts are put on designing new duplex alloys based on the Ti-6Al-4V and Ti-Al-Fe systems, which will have a beta volume fraction of 40-50 percent at around 800 degree C. To accomplish this, experimental volume fractions of the beta phase in several titanium alloys are being compared with predicted and calculated ones using phase equilibria analyses and some suggestions will be made on modifying the alloy compositions. For comparison, the quaternary Ti-V-Fe-Al system and their subsystems are chosen due to availability of both experimental and thermodynamic data

  1. Grain refinement of hypoeutectic Al-Si alloy prepared with ELTA by Al-4B master alloy

    Institute of Scientific and Technical Information of China (English)

    WANG Ming-xing; MENG Xiang-yong; LIU Zhi-yong; LIU Zhong-xia; WENG Yong-gang; SONG Tian-fu; YANG Sheng

    2006-01-01

    Electrolytic low-titanium aluminum (ELTA) was produced by adding TiO2 powder to an industrial aluminum electrolyzer.The grain refining effect of Al-4B master alloy in the hypoeutectic Al-Si alloy prepared by using ELTA was investigated, and compared with those of Al-5Ti, Al-5Ti-1B and Al-4B master alloys in the similar alloy prepared by using pure Al. The results indicate that when Al-4B is added to the melt of the alloy prepared by using ELTA in terms of the Ti/B mass ratio of 5:1, the grain refining effect is better than those of Al-5Ti, Al-5Ti-1B and Al-4B master alloys. Thus, using Al-4B to refine the grain of Al-Si alloys prepared by using ELTA will possibly become a feasible way of obtaining Al-Si alloy with homogeneous and fine microstructure.

  2. The physical metallurgy of mechanically-alloyed, dispersion-strengthened Al-Li-Mg and Al-Li-Cu alloys

    Science.gov (United States)

    Gilman, P. S.

    1984-01-01

    Powder processing of Al-Li-Mg and Al-Li-Cu alloys by mechanical alloying (MA) is described, with a discussion of physical and mechanical properties of early experimental alloys of these compositions. The experimental samples were mechanically alloyed in a Szegvari attritor, extruded at 343 and 427 C, and some were solution-treated at 520 and 566 C and naturally, as well as artificially, aged at 170, 190, and 210 C for times of up to 1000 hours. All alloys exhibited maximum hardness after being aged at 170 C; lower hardness corresponds to the solution treatment at 566 C than to that at 520 C. A comparison with ingot metallurgy alloys of the same composition shows the MA material to be stronger and more ductile. It is also noted that properly aged MA alloys can develop a better combination of yield strength and notched toughness at lower alloying levels.

  3. Development and application of titanium alloy casting technology in China

    Institute of Scientific and Technical Information of China (English)

    NAN Hai; XIE Cheng-mu; ZHAO Jia-qi

    2005-01-01

    The development and research of titanium cast alloy and its casting technology, especially its application inaeronautical industry in China are presented. The technology of molding, melting and casting of titanium alloy, casting quality control are introduced. The existing problems and development trend in titanium alloy casting technology are also discussed.

  4. Nitriding of super alloys for enhancing physical properties

    Science.gov (United States)

    Purohit, A.

    1984-06-25

    The invention teaches the improvement of certain super alloys by exposing the alloy to an atmosphere of elemental nitrogen at elevated temperatures in excess of 750/sup 0/C but less than 1150/sup 0/C for an extended duration, viz., by nitriding the surface of the alloy, to establish barrier nitrides of the order of 25 to 100 micrometers thickness. These barrier

  5. Method of making quasicrystal alloy powder, protective coatings and articles

    Science.gov (United States)

    Shield, J.E.; Goldman, A.I.; Anderson, I.E.; Ellis, T.W.; McCallum, R.W.; Sordelet, D.J.

    1995-07-18

    A method of making quasicrystalline alloy particulates is disclosed wherein an alloy is superheated and the melt is atomized to form generally spherical alloy particulates free of mechanical fracture and exhibiting a predominantly quasicrystalline in the atomized condition structure. The particulates can be plasma sprayed to form a coating or consolidated to form an article of manufacture. 3 figs.

  6. Microstructure and properties of modified and conventional 718 alloys

    Institute of Scientific and Technical Information of China (English)

    LIU Fang; SUN Wen-ru; DU Jin-hui; DONG Jian-xin; GUO Shou-ren; YANG Hong-cai; HU Zhuang-qi

    2006-01-01

    Continuing the effort to redesign IN718 alloy in order to provide microstructural and mechanical stability beyond 650 ℃, IN718 alloy was modified by increasing the Al, P and B contents, and the microstructure and mechanical properties of the modified alloy were compared with those of the conventional alloy by SEM and TEM. The precipitation of the grain boundaries of the two alloys is different. The Cr-rich phase, Laves phase and α-Cr phase are easily observed in the modified alloy. The γ″ and γ′ phases in the modified alloy are precipitated in a "compact form". The tensile strengths of the modified alloy at room temperature and 680 ℃ are obviously higher than those of the conventional one. The impact energy of the modified alloy is only about half of that of the conventional alloy. Ageing at 680 ℃ up to 1 000 h lowers the tensile properties and impact energy of both the conventional and modified 718 alloys, except increasing the ductility at 680 ℃. It is concluded that the modified alloy is more stable than the conventional one.

  7. Residual stress state in titanium alloy remelted using GTAW method

    OpenAIRE

    Dudek, A.; Z. Balaga

    2009-01-01

    Test materials comprised two-phase titanium alloy Ti6Al4V (Grade5). The surface of the tested alloy was remelted by means of TIG welding method using variable current-voltage parameters. The investigations aimed to determine surface geometry and residual stresses in the remelted surface layer in the investigated alloy.

  8. Two-Phase Equilibrium in Small Alloy Particles

    OpenAIRE

    Weissmüller, J.; Bunzel, P.; Wilde, G.

    2004-01-01

    The coexistence of two phases within a particle requires an interface with a significant capillary energy. We show that this entails changes in the nature of alloy phase equilibria at small size. Most notably, the eutectic points in alloy phase diagrams degenerate into intervals of composition where the alloy melts discontinuously.

  9. Investigation of joining techniques for advanced austenitic alloys

    Energy Technology Data Exchange (ETDEWEB)

    Lundin, C.D.; Qiao, C.Y.P.; Kikuchi, Y.; Shi, C.; Gill, T.P.S.

    1991-05-01

    Modified Alloys 316 and 800H, designed for high temperature service, have been developed at Oak Ridge National Laboratory. Assessment of the weldability of the advanced austenitic alloys has been conducted at the University of Tennessee. Four aspects of weldability of the advanced austenitic alloys were included in the investigation.

  10. 21 CFR 872.3080 - Mercury and alloy dispenser.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mercury and alloy dispenser. 872.3080 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3080 Mercury and alloy dispenser. (a) Identification. A mercury and alloy dispenser is a device with a spring-activated valve intended to measure...

  11. New development of anodizing process of magnesium alloys

    Institute of Scientific and Technical Information of China (English)

    BAI Li-qun; LI Di

    2004-01-01

    Magnesium alloy, a kind of environment-friendly material with promising and excellent properties, is a good choice for a number of applications. The research and development of anodizing on magnesium alloys and its application situation are reviewed, and the anodizing development trend on magnesium alloys is summarized.

  12. 21 CFR 872.3060 - Noble metal alloy.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Noble metal alloy. 872.3060 Section 872.3060 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3060 Noble metal alloy. (a) Identification. A noble metal alloy is a device composed primarily of noble metals, such as gold, palladium, platinum, or silver,...

  13. Electronic-Structure-Based Design of Ordered Alloys

    DEFF Research Database (Denmark)

    Bligaard, Thomas; Andersson, M.P.; Jacobsen, Karsten Wedel; Skriver, Hans Lomholt; Christensen, Claus H.; Nørskov, Jens Kehlet

    2006-01-01

    We describe some recent advances in the methodology of using electronic structure calculations for materials design. The methods have been developed for the design of ordered metallic alloys and metal alloy catalysts, but the considerations we present are relevant for the atomic-scale computational...... discovery of a promising catalytic metal alloy surface with high reactivity and low cost....

  14. 21 CFR 872.3710 - Base metal alloy.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Base metal alloy. 872.3710 Section 872.3710 Food... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3710 Base metal alloy. (a) Identification. A base metal alloy is a device composed primarily of base metals, such as nickel, chromium, or cobalt, that...

  15. Foaming behaviour of Al-Si-Cu-Mg alloys

    Energy Technology Data Exchange (ETDEWEB)

    Kim, A. [Kongju National University (Korea). Dept. of Mechanical Engineering; Cho, S.S. [Chungnam National University, Daejeon (Korea). School of Materials Engineering; Lee, H.J. [Hanbat National University, Daejeon (Korea). Dept. of Building Service Engineering

    2004-12-15

    The powder metallurgical route was utilised to obtain the Al-5Si-4Cu-4Mg (alloy 544) and Al-3Si-2Cu-2Mg (alloy 322) foams. Various steps such as centrifugal atomisation, mixing alloy powder and foaming agent (1 wt-%TiH{sub 2}), cold compaction of mixture, hot extrusion and foaming in a preheated furnace were performed. Foaming behaviour of the alloys was investigated by digital microscopy, image analysis, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) mapping in this study. It was found that alloy 544 takes a shorter period of time to initiate pore nucleation than alloy 322. Alloy 544 had a higher pore growth rate than alloy 322 at the same pre-set furnace temperature. In both alloys, crack-like pore nucleation occurred between aluminium alloy powders elongated in a direction parallel to the extrusion direction. Both alloys showed the same foaming sequence of crack-like pore nucleation, spherical pore growth, coalescence of neighbouring pores and collapse of pores adjacent to the free surface of specimen. The time required to start pore nucleation decreased with the increase of foaming temperature. The cell walls of both alloys consisted of {alpha}-Al phase and eutectic phase. (author)

  16. Corrosion behavior of vanadium alloys in flowing lithium

    International Nuclear Information System (INIS)

    Corrosion data are presented for several vanadium alloys exposed to flowing lithium at 427, 482 and 5380C. The corrosion behavior was evaluated by measuring weight change. Metallographic results and data on the nonmetallic element transfer in lithium-exposed specimens are also presented. The influence of alloy composition and exposure conditions on the corrosion behavior of vanadium alloys is discussed. (orig.)

  17. Effect of alloying elements Al and Ca on corrosion resistance of plasma anodized Mg alloys

    Science.gov (United States)

    Anawati, Asoh, Hidetaka; Ono, Sachiko

    2016-04-01

    Plasma anodizing is a surface treatment used to form a ceramic-type oxide film on Mg alloys by the application of a high anodic voltage to create intense plasma near the metal surface. With proper selection of the process parameters, the technique can produce high quality oxide with superior adhesion, corrosion resistance, micro-hardness, wear resistance and strength. The effect of alloying element Al on plasma anodizing process of Mg alloys was studied by comparing the anodizing curves of pure Mg, AZ31, and AZ61 alloys while the effect of Ca were studied on AZ61 alloys containing 0, 1, and 2 wt% Ca. Anodizing was performed in 0.5 M Na3PO4 solution at a constant current density of 200 Am-2 at 25°C. Anodic oxide films with lava-like structure having mix composition of amorphous and crystal were formed on all of the alloys. The main crystal form of the oxide was Mg3(PO4)2 as analyzed by XRD. Alloying elements Al and Ca played role in modifying the plasma lifetime during anodization. Al tended to extend the strong plasma lifetime and therefore accelerated the film thickening. The effect of Ca on anodizing process was still unclear. The anodic film thickness and chemical composition were altered by the presence of Ca in the alloys. Electrochemical corrosion test in 0.9% NaCl solution showed that the corrosion behavior of the anodized specimens depend on the behavior of the substrate. Increasing Al and Ca content in the alloys tended to increase the corrosion resistance of the specimens. The corrosion resistance of the anodized specimens improved significantly about two orders of magnitude relative to the bare substrate.

  18. The structural changes of Al-Ti-Fe alloy during mechanical alloying process

    Directory of Open Access Journals (Sweden)

    R. Nowosielski

    2008-08-01

    Full Text Available Purpose: The aim of this paper is to determine the influence of the mechanical milling process on the structure of Al67Ti25Fe8 alloy.Design/methodology/approach: The powders of the Al67Ti25Fe8 alloys were obtained by mechanical alloying method in a planetary Fritsh Pulverisette 5 mill. In order to investigate the structure scanning electron microscopy were used. Phase transformations were determined by means of diffractometer. The cross-sectional microstructure evolution and element distribution of Al67Ti25Fe8 powder alloys were investigated using backscattering electrons of SEM. The distribution of powder particles was determined by a sieve analysis.Findings: The laboratory test show that, by using the mechanical alloying method, one can produce Al67Ti25Fe8 alloys with intentional chemical constitution and desirable structure. Inside the milling materials didn’t find some impurities and undesirable phases.Research limitations/implications: Property of Al67Ti25Fe8 alloys correction is possible by refinement of grains and modification of phases composition. All of the presented experiments in this article are made on a laboratory scale. Continuation of the investigations in the field of sintering alloyed powders to obtained massive materials is foreseen.Practical implications: In the nearest future the producing of bulk materials characterized by better properties in comparison with traditional materials will take place not only in the laboratory scale and move to the industry.Originality/value: : In addition a good microstructural homogeneity and first of all mechanical properties was achieved, also practical application will be possible. The Al-Ti-Fe alloys have been considered to be potentially important for applications at high temperature by reason of their low density end expected high specific strength.

  19. The Fe-C alloy obtained by mechanical alloying and sintering

    Directory of Open Access Journals (Sweden)

    R. Nowosielski

    2006-08-01

    Full Text Available Purpose: The main aim of this work was to determine structure and properties massive Fe-C materials obtainedby mechanical alloying and sintering.Design/methodology/approach: The results of experiments on the fabrication of powders materials and solidmaterials using pure iron and graphite powders are presented. The powders of the Fe-C alloys obtained bymechanical alloying method and after that the powders were sintering. The sintering process was conducted byusing the impulse-plasma method. In this article the usability of mechanical alloying method and sintering toproduce the massive materials were presented.Findings: The laboratory tests show that, by using the mechanical alloying method, one can produce powderof Fe-6.67% mass.C alloy with intentional chemical constitution and desirable structure. The structure of thematerials is homogeneous and fine-grained and inside the materials didn’t find some impurities and undesirablephases. The sintering by using the impulse-plasma method makes the sinters with close to theoretical densitywith non-variable nanocrystaline microstructure possible. The hardness of the sinters was 1300 HV.Research limitations/implications: The mechanical alloying method is one of the techniques which enablesto improve property of Fe-C alloys. It is possible by refinement of structure and modification of phasescomposition. Nanocrystaline size of grain is advisable to make it in correct technology of producing massivematerials with nanocrystaline structure. All of the presented experiments in this article are conducted on alaboratory scale. At the present time, all over the world, the mechanical alloying and the sintering processes ofnanocrystaline materials are only just in the laboratory scientific research. In the nearest future the producing ofnanomaterials will take place not only in the laboratory and move to the industry.Originality/value: The nanomaterials have an unusual mechanical, physical and chemical

  20. Coupling between bulk ordering and surface segregation: from alloy surfaces to surface alloys

    International Nuclear Information System (INIS)

    -The knowledge of the alloy surfaces is of prime interest to understand their catalytic properties. On the one hand, the determination of the stability of the surface alloys depends very strongly on the behaviours of the AcB1-c alloy surfaces. On the other hand, the knowledge of the kinetics of the formation-dissolution of surface alloys can allow to understand the equilibrium segregation isotherm. We have then studied the relation between the equilibrium surface segregation in an alloy AcB1-c and the kinetics of dissolution of a few metallic layers of A/B and the inverse deposit. We have used an energetic model derived from the electronic structure (T.I.B.M.) allowing us to study the surface segregation both in the disordered state and in the ordered one. The kinetics of dissolution were studied using the kinetic version of this model (K.T.I.B.M.) consistent with the equilibrium model. To illustrate our study, we have chosen the Cu-Pd system, a model for the formation of surface alloys and for which a great number of studies, both experimental and theoretical, are in progress. We then have shown for the (111) surface of this system that the surface alloys obtained during the dissolution are related to the alloy surfaces observed for the equilibrium segregation. The Cu-Pd system is characteristic of systems which have a weak segregation energy. Then, we have performed an equivalent study for a system with a strong segregation energy. Our choice was directly put on the Pt-Sn system. The surface behaviour, both in equilibrium and during the kinetics of dissolution, is very different from the Cu-Pd case. In particular, we have found pure 2-D surface alloys. Finally, a quenched molecular dynamics study has allowed us to determine the relative stability of various possible surface superstructures. (author)

  1. Structure of molten Al-Si alloys

    International Nuclear Information System (INIS)

    The temperature variation of the structure and microstructure of molten eutectic Al1-xSix alloys (x = 0.122 and 0.20) have been studied by neutron diffraction and small-angle neutron scattering (SANS), as well as measurements performed on pure liquid Al. All measurements have been performed at five temperatures in a heating-cooling loop. The SANS results unambiguously show that for the eutectic alloy (x = 0.122) the microstructure changes with increasing temperature in a partly reversible way while for the hypereutectic (x = 0.20) alloy the change is almost completely irreversible. This change in microstructure also manifests itself in the shape of the static structure factor S(Q)

  2. Titanium by design: TRIP titanium alloy

    Science.gov (United States)

    Tran, Jamie

    Motivated by the prospect of lower cost Ti production processes, new directions in Ti alloy design were explored for naval and automotive applications. Building on the experience of the Steel Research Group at Northwestern University, an analogous design process was taken with titanium. As a new project, essential kinetic databases and models were developed for the design process and used to create a prototype design. Diffusion kinetic models were developed to predict the change in phase compositions and microstructure during heat treatment. Combining a mobility database created in this research with a licensed thermodynamic database, ThermoCalc and DICTRA software was used to model kinetic compositional changes in titanium alloys. Experimental diffusion couples were created and compared to DICTRA simulations to refine mobility parameters in the titanium mobility database. The software and database were able to predict homogenization times and the beta→alpha plate thickening kinetics during cooling in the near-alpha Ti5111 alloy. The results of these models were compared to LEAP microanalysis and found to be in reasonable agreement. Powder metallurgy was explored using SPS at GM R&D to reduce the cost of titanium alloys. Fully dense Ti5111 alloys were produced and achieved similar microstructures to wrought Ti5111. High levels of oxygen in these alloys increased the strength while reducing the ductility. Preliminary Ti5111+Y alloys were created, where yttrium additions successfully gettered excess oxygen to create oxides. However, undesirable large oxides formed, indicating more research is needed into the homogeneous distribution of the yttrium powder to create finer oxides. Principles established in steels were used to optimize the beta phase transformation stability for martensite transformation toughening in titanium alloys. The Olson-Cohen kinetic model is calibrated to shear strains in titanium. A frictional work database is established for common alloying

  3. Steam Initiated Surface Modification of Aluminium Alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud

    detailed analysis of the structure and morphology of the coating, and interface structure with and without organic top coat. Corrosion performance of the coatings was investigated using electrochemical methods, AASS, and FFC test. The morphology, microstructure, chemical composition, adhesion, and......The extensive demand of aluminium alloys in various industries such as in transportationis mainly due to the high strength to weight ratio, which could be translated into fuel economy and efficiency. Corrosion protection of aluminium alloys is an important aspect for all applications which includes......-friendly alternative processes. In the present work high temperature steam-based process has been investigated as a possible chromate free conversion coating. Investigations in the thesis includes the effect of alloy type, substrate microstructure, surface finish, and various chemistries on the coating formation, and...

  4. Glow discharge amorphous silicon tin alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mahan, A H; Sanchez, A; Williamson, D L; von Roedern, B; Madan, A

    1984-06-01

    We present basic density of states, photoresponse, and transport measurements made on low bandgap a-SiSn:H alloys produced by RF glow discharge deposition of SiH/sub 4/, H/sub 2/ and Sn(CH/sub 3/)/sub 4/. Although we demonstrate major changes in the local bonding structure and the density of states, the normalized photoresponse still remains poor. We provide evidence that two types of defect levels are produced with Sn alloying, and that the resultant density of states increase explains not only the n- to p-type conductivity transition reported earlier, but also the photoresponse behavior. We also report that a-SiSn:H can be doped with P. From our device analysis we suggest that in order to improve the alloy performance significantly, the density of states should be decreased to levels comparable to or lower than those presently obtained in a-Si:H.

  5. Welding of gamma titanium aluminide alloys

    Science.gov (United States)

    Smashey, Russell W. (Inventor); Kelly, Thomas J. (Inventor); Snyder, John H. (Inventor); Sheranko, Ronald L. (Inventor)

    1998-01-01

    An article made of a gamma titanium aluminide alloy is welded, as for example in the weld repair of surface cracks, by removing foreign matter from the area to be welded, first stress relieving the article, cooling the entire article to a welding temperature of from about 1000.degree. F. to about 1400.degree. F., welding a preselected region in an inert atmosphere at the welding temperature, and second stress relieving the article. Welding is preferably accomplished by striking an arc in the preselected region so as to locally melt the alloy in the preselected region, providing a filler metal having the same composition as the gamma titanium aluminide alloy of the article, and feeding the filler metal into the arc so that the filler metal is melted and fused with the article to form a weldment upon solidification.

  6. High-strength iron aluminide alloys

    Energy Technology Data Exchange (ETDEWEB)

    McKamey, C.G.; Maziasz, P.J.

    1996-06-01

    Past studies have shown that binary Fe{sub 3}Al possesses low creep-rupture strength compared to many other alloys, with creep-rupture lives of less than 5 h being reported for tests conducted at 593{degrees}C and 207 MPa. The combination of poor creep resistance and low room-temperature tensile ductility due to a susceptibility to environmentally-induced dynamic hydrogen embrittlement has limited use of these alloys for structural applications despite their excellent corrosion properties. With regard to the ductility problem, alloy development efforts have produced significant improvements, with ductilities of 10-20% and tensile yield strengths as high as 500 MPa being reported. Likewise, initial improvements in creep resistance have been realized through small additions of Mo, Nb, and Zr.

  7. The metallurgy of high temperature alloys

    Science.gov (United States)

    Tien, J. K.; Purushothaman, S.

    1976-01-01

    Nickel-base, cobalt-base, and high nickel and chromium iron-base alloys are dissected, and their microstructural and chemical components are assessed with respect to the various functions expected of high temperature structural materials. These functions include the maintenance of mechanical integrity over the strain-rate spectrum from creep resistance through fatigue crack growth resistance, and such alloy stability expectations as microstructural coarsening resistance, phase instability resistance and oxidation and corrosion resistance. Special attention will be given to the perennial conflict and trade-off between strength, ductility and corrosion and oxidation resistance. The newest developments in the constitution of high temperature alloys will also be discussed, including aspects relating to materials conservation.

  8. Oxygen diffusion in vanadium-based alloys

    International Nuclear Information System (INIS)

    The experimental study of transport and equilibrium properties of oxygen in vanadium-based alloys was made by EMF measurements on solid electrolytic cells over the temperature range of 873 to 14230K. The oxygen diffusion in vanadium was not significantly modified by small additions of Ti, Cr, Ni, Nb and Ta. The increase in the activation energy for oxygen diffusion in the V-based alloys containing Cr, Ni, Nb and Ta probably reflects the effect of these substitutional solutes on the activity coefficient of oxygen. The oxygen activity was increased by the addition of 1 at % of Cr, Ni and Nb, and decreased by the addition of Ti and Ta. However, the effects in the alloys containing Nb and Ta are very small

  9. Alloys having improved resistance to hydrogen embrittlement

    International Nuclear Information System (INIS)

    The invention involves a process of improving the hydrogen embrittlement resistance of a cold-worked high yield strength nickel/cobalt base alloy containing chromium, and molybdenum and/or tungsten and having individual elemental impurity concentrations as measured by Auger spectroscopy at the crystallographic boundaries of up to about 1 Atomic percent. These elemental impurities are capable of becoming active and mobile at a temperature less than the recrystallization temperature of the alloy. The process involves heat treating the alloy at a temperature above 1300 degrees F but below the temperature of recrystallization for a time of from 1/4 to 100 hours. This is sufficient to effect a reduction in the level of the elemental impurities at the crystallographic boundaries to the range of less than 0.5 Atomic percent without causing an appreciable decrease in yield strength

  10. Calorimetry studies on U-Cr alloys

    International Nuclear Information System (INIS)

    A calorimetric study of Uranium-Chromium system is of interest on both basic and applied fronts. With the advent of U-Pu-Zr alloy as the fuel, in combination with ferritic-martensitic steel as the cladding material, the metal fuelled fast reactors constitute the second major step in Indian nuclear power program. In such a context, a fundamental investigation on the high temperature phase stability of U-Cr alloys is of particular relevance in getting further insight in to the complex issue of the metallurgical compatibility of ferritic steels with metallic Uranium-Zirconium fuel. It may be added that following U-Fe, and U-Zr binaries, the U-Cr constitutes one of the important subsystems of the complex U-Zr-Pu-Fe- Cr-Mn-Si-V-Nb-C-N multinary system. In the current study, the results of calorimetry investigations on U, U-2, 3, 7, 15wt. % Cr alloys are presented

  11. Stabilisation Treatment of Titanium Alloy VT9

    Directory of Open Access Journals (Sweden)

    B.K. Singh

    1999-04-01

    Full Text Available Systematic investigations of tensile properties of alpha + beeta type high temperature Ti alloy VT9 (Ti-6 Al-3.3 Mo-1.65 Zr-0.3 Si wt. per cent developed on ageing at 803, 823 and 853 K for 2, 6 and 121 hr, respectively following the solution treatment in alpha + beeta phase field at 1233 K for 1 hr and air cooling, show that the highest tensile strength values are obtained on ageing at 823 K for 6 or 12 hr. In view of the shorter duration of ageing, the ageing treatment at 823 K for 6 hr is considered appropriate stabilisation treatment for this alloy. The tensile strength values of the alloy VT9 from the newly-established stabilisation treatment are considerably higher than those resulting from the earlier reported stabilisation treatment (at 803 K for 6 hr, in particular at room temperature.

  12. Alloy 800 welding experience at UKAEA Springfields

    International Nuclear Information System (INIS)

    Investigatins into the welding of alloy 800 at the Reactor Fuel Element Laboratories, Springfields, commenced about three years ago following an extended development programme on tube to tube plate welding of low alloy and stainless steels for the Prototype Fast Reactor. The techniques and approach developed for critical fuel element welding applications had proved equally suitable for the precision welding requirements on the much heavier sections of heat exchangers. It had been demonstrated that the same control of weld quality and profile could be achieved with consistency and the permissible range of critical parameters could be readily defined. Because of this, development work was continued to include other materials, such as alloy 800, which might be of potential use. The tungsten inert gas (T.I.G.) arc welding process is used, and the equipment, including the control system, is described. Tube to tube-plate welding, and tube to tube butt welding, are discussed. (author)

  13. Structure of molten Al-Si alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dahlborg, U. [CNRS, Ecole des Mines, Nancy, France; Besser, M. [Ames Laboratory; Calvo-Dahlborg, M. [CNRS, Ecole des Mines, Nancy, France; Cuello, G. [Institut Laue-Langevin (ILL); Dewhurst, C. D. [Institut Laue-Langevin (ILL); Kramer, Matthew J. [Ames Laboratory; Morris, James R [ORNL; Sordelet, Daniel [Ames Laboratory

    2007-01-01

    The temperature variation of the structure and microstructure of molten eutectic Al{sub 1-x}Si{sub x} alloys (x = 0.122 and 0.20) have been studied by neutron diffraction and small-angle neutron scattering (SANS), as well as measurements performed on pure liquid Al. All measurements have been performed at five temperatures in a heating-cooling loop. The SANS results unambiguously show that for the eutectic alloy (x = 0.122) the microstructure changes with increasing temperature in a partly reversible way while for the hypereutectic (x = 0.20) alloy the change is almost completely irreversible. This change in microstructure also manifests itself in the shape of the static structure factor S(Q).

  14. Irradiation creep of vanadium-base alloys

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, H.; Billone, M.C.; Strain, R.V.; Smith, D.L. [Argonne National Lab., IL (United States); Matsui, H. [Tohoku Univ. (Japan)

    1998-03-01

    A study of irradiation creep in vanadium-base alloys is underway with experiments in the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) in the United States. Test specimens are thin-wall sealed tubes with internal pressure loading. The results from the initial ATR irradiation at low temperature (200--300 C) to a neutron damage level of 4.7 dpa show creep rates ranging from {approx}0 to 1.2 {times} 10{sup {minus}5}/dpa/MPa for a 500-kg heat of V-4Cr-4Ti alloy. These rates were generally lower than reported from a previous experiment in BR-10. Because both the attained neutron damage levels and the creep strains were low in the present study, however, these creep rates should be regarded as only preliminary. Substantially more testing is required before a data base on irradiation creep of vanadium alloys can be developed and used with confidence.

  15. Development of environmentally friendly cast alloys. High-zinc Al alloys

    Directory of Open Access Journals (Sweden)

    W.K. Krajewski

    2010-10-01

    Full Text Available Purpose: The main purpose of this paper is presenting the results obtained in years 2007 – 2010 in frame of the project Marie Curie Transfer of Knowledge – CastModel. The project was focused, among others, at elaborating new, environmentally friendly cast alloys based on the Al-Zn system. Particularly, efforts were aimed at improving ductility of the sand cast high-zinc aluminium alloys (HZnAl by using the newly elaborated master alloys, based on the Al-Zn-Ti system.Design/methodology/approach: The presented work is focused on the nucleation of the high-zinc Al-20 wt% Zn (HZnAl AlZn20 alloy, known as the high damping one, aiming at improving plastic properties of the sand castings. The melted alloy was nucleated with AlTi5B1 (TiBAl and AlTi3C0.15 (TiCAl refiners as well as with the newly introduced ZnAl-Ti3 one. During the research the following experimental techniques were used: LM, SEM-EBSD, EDS, TA, DSC, Quantitative Metallography, UTS, Elongation and Attenuation coefficient measurements.Findings: During the performed examinations it was found out that significant increasing of the grain population of the inoculated alloy increases plasticity represented by elongation. The attenuation coefficient of the nucleated alloy, measured using an Olympus Epoch XT device, preserves its high value. The results obtained allow to characterize the examined AlZn20 alloy as promissive, having good strength and damping properties as well as the environmentally friendly alloy because of its comparatively low melting temperatures.Practical implications: The grain-refined high-zinc aluminium alloys can be used as the high damping substitutes of the traditional, more energy consumable Fe-based foundry alloys.Originality/value: The newly elaborated ZnAl-Ti based master alloys show high refining potency and quick dissolution in low melting temperatures of about 500°C, and are the promissive alternatives of the traditional AlTi-based ones.

  16. Effect of alloying elements on the shape memory properties of ductile Cu-Al-Mn alloys

    International Nuclear Information System (INIS)

    The effect of alloying elements on the Ms temperature, ductility and the shape memory properties of Cu-Al-Mn ductile shape memory (SM) alloys was investigated by differential scanning calorimetry, cold-rolling and tensile test techniques. It was found that the addition of Au, Si and Zn to the Cu73-Al17-Mn10 alloy stabilized the martensite (6M) phase increasing the Ms temperature, while the addition of Ag, Co, Cr, Fe, Ni, Sn and Ti decreased the stability of the martensite phase, decreasing the Ms temperature. The SM properties were improved by the addition of Co, Ni, Cr and Ti. (orig.)

  17. The influence of copper on the SCC of alloy 600 and alloy 690 steam generator tubes

    International Nuclear Information System (INIS)

    Capsule tests have been performed on alloy 600 and alloy 690 steam generator tubes in acid sulfate environments. The most important result is that alloy 690, which is completely immune in this type of environment, becomes very susceptible to SCC in the presence of copper, even when it is added to the solution under the metallic form. Although the role of copper is not fully understood, its influence can not be explained only by an effect on the electrochemical potential. Complexation, adsorption and diffusion properties of copper could play an important role. (authors)

  18. Master alloy for manufacture of stainless and refractory steels and alloys

    International Nuclear Information System (INIS)

    The master alloy contains iron, 0.01 to 0.03% carbon, 0.1 to 2.0% manganese, 0.01 to 0.2% silicon, possibly impurities, such as traces of up to 0.015% sulphur, up to 0.01% phosphorus, 0.01%. nitrogen, 0.1% copper, up to 0.01% cobalt and traces of up to 0.05% arsenic, tin, lead, zinc or bismuth separate or in combination. The master alloy is used in the manufacture of steels and alloys for the chemical industry and for nuclear power. (B.S.)

  19. Role of Stress in Thin Film Alloy Thermodynamics: Competition between Alloying and Dislocation Formation

    International Nuclear Information System (INIS)

    Using scanning tunneling microscopy (STM) and first-principles local-spin-density-approximation calculations to study submonolayer films of Co1-cAg c/Ru( 0001) alloys, we have discovered a novel phase-separation mechanism. When the Ag concentration c exceeds 0.4, the surface phase separates between a dislocated, pure Ag phase and a pseudomorphically strained Co0.6Ag 0.4 surface alloy. We attribute the phase separation to the competition between two stress relief mechanisms: surface alloying and dislocation formation. The agreement between STM measurements and our calculated phase diagram supports this interpretation

  20. First-principles density functional calculations for Mg alloys: A tool to aid in alloy development

    International Nuclear Information System (INIS)

    In studying the thermodynamics and phase stability of Mg alloys, one is often confronted with the lack of accurate, quantitative experimental data. This deficiency can be partially rectified via first-principles calculations based on density functional theory. In this paper, we will illustrate the utility of first-principles energetics for Mg alloys using three case studies (i) formation energies of ordered/disordered solid phases; (ii) solute-vacancy binding energies in Mg; (iii) point defect formation energies of β-Mg17Al12. These first-principles calculations can provide highly accurate thermodynamic and kinetic information for Mg alloys.

  1. Controlling quality of ferroalloys and alloying additives in the manufacture of nickel alloys for nuclear applications

    International Nuclear Information System (INIS)

    Nickel alloys supplied to the nuclear industry must meet strict requirements for quality and traceability of constituents. Ensuring that end products meet those requirements involves careful control of the raw materials used in melting the alloys. Especially important is an effective system of quality control for purchasing and consuming ferroalloys and alloying additives. Development and operation of such a system requires (1) adequate specifications, (2) good relations with suppliers, (3) an approved-suppliers list, (4) formal receiving inspection, and (5) backup surveillance during processing

  2. Mechanical and microstructural characterization of the nickel base alloy (Alloy 600) after heat treatment

    International Nuclear Information System (INIS)

    The characterization of microstructural and mechanical properties of cold rolled and heat treated alloys 600 made in Brazil were investigated. The recovery and recrystallization behavior as well as solubilization and aging have been studied using optical, scanning electron and transmission electron microscopy. Microhardness and tensile testing have been carried out. The recovery process of the cold rolled alloy 600 occurred until 600 deg C and the recrystallization stage was situated between 600 and 850 deg C. The primary recrystallization temperature was obtained at 850 deg C after 1 hour (isochronal heat treatments). The aged alloy 600 shows carbide precipitation on grains bu with ductility maintenance. (author)

  3. Effect of mechanical alloying and Ti addition on solution and ageing treatment of an AA7050 aluminium alloy

    OpenAIRE

    Kátia Regina Cardoso; Dilermando Nagle Travessa; Asunción García Escorial; Marcela Lieblich

    2007-01-01

    In this work, solution heat treatments at different temperatures were performed in a commercial based AA7050 aluminium alloy, with and without titanium addition, produced by mechanical alloying and hot extrusion with the aim to investigate the effect of titanium addition and mechanical alloying in the precipitates stability. The same heat treatment conditions were used in a reference sample obtained from a commercial AA7050 alloy. Solution heat treated samples were characterised by differenti...

  4. Electrocatalysts having platium monolayers on palladium, palladium alloy, and gold alloy core-shell nanoparticles, and uses thereof

    Science.gov (United States)

    Adzic, Radoslav; Mo, Yibo; Vukmirovic, Miomir; Zhang, Junliang

    2010-12-21

    The invention relates to platinum-coated particles useful as fuel cell electrocatalysts. The particles are composed of a noble metal or metal alloy core at least partially encapsulated by an atomically thin surface layer of platinum atoms. The invention particularly relates to such particles having a palladium, palladium alloy, gold alloy, or rhenium alloy core encapsulated by an atomic monolayer of platinum. In other embodiments, the invention relates to fuel cells containing these electrocatalysts and methods for generating electrical energy therefrom.

  5. Porous Zr-Ti-Nb alloys

    International Nuclear Information System (INIS)

    Recent studies linked to the production of implants focus on the development of porous materials, which facilitate bone growth inside pores and help to hold the prosthesis in place. This work evaluates the effect of the Nb content on the structural and mechanical properties of two porous material alloys obtained using the particle separator method. Two Ti-Zr based alloys were prepared with different contents of Nb, -34.4Ti64Zr1.6Nb and 34.5Ti60.1Zr5.5Nb- in an arc furnace with argon atmosphere. The metal powders were obtained using the hydriding-dehydriding method in Sieverts type equipment. Metal powders measuring 37 and 74 μ were selected by screening and were mixed with 300 and 700 μ ammonium bicarbonate particle separators. The mixtures obtained were compacted in a uniaxial press at 400MPa. The cylinders from the compacting were heated to 200oC, to eliminate the particle separators, and then sintered at 1300oC. Materials with 70% porosity were obtained from both alloys. The densities of the alloys measured with an He pycnometer were (5.6 ± 0.1) g/cm3. The densities of the two alloys porous materials were (5.3 ± 0.1) g/cm3, close to the density of the alloys which indicates a structure of interconnected pores, as required for the growth of the cells inside and for vascularisation. A quantitative analysis of the pores distribution was obtained from micrographs using an optic microscope and image analysis software. The mechanical properties were evaluated by compression tests carried out at room temperature and at a deformation speed of 10-3 s-1

  6. Fast LIBS Identification of Aluminum Alloys

    Directory of Open Access Journals (Sweden)

    Tawfik W.

    2007-04-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS has been applied to analysis aluminum alloy targets. The plasma is generated by focusing a 300 mJ pulsed Nd: YAG laser on the target in air at atmospheric pressure. Such plasma emission spectrum was collected using a one-meter length wide band fused-silica optical fiber connected to a portable Echelle spectrometer with intensified CCD camera. Spectroscopic analysis of plasma evolution of laser produced plasmas has been characterized in terms of their spectra, electron density and electron temperature assuming the LTE and optically thin plasma conditions. The LIBS spectrum was optimized for high S/N ratio especially for trace elements. The electron temperature and density were determined using the emission intensity and stark broadening, respectively, of selected aluminum spectral lines. The values of these parameters were found to change with the aluminum alloy matrix, i.e. they could be used as a fingerprint character to distinguish between different aluminum alloy matrices using only one major element (aluminum without needing to analysis the rest of elements in the matrix. Moreover, It was found that the values of T e and N e decrease with increasing the trace elements concentrations in the aluminum alloy samples. The obtained results indicate that it is possible to improve the exploitation of LIBS in the remote on-line industrial monitoring application, by following up only the values of T e and N e for aluminum in aluminum alloys as a marker for the correct alloying using an optical fiber probe.

  7. Characterization for Fusion Candidate Vanadium Alloys

    Institute of Scientific and Technical Information of China (English)

    T. Muroga; T. Nagasaka; J. M. Chen; Z. Y. Xu; Q. Y. Huang; y. C. Wu

    2004-01-01

    This paper summarizes recent achievements in the characterization of candidate vanadium alloys obtained for fusion in the framework of the Japan-China Core University Program.National Institute for Fusion Science (NIFS) has a program of fabricating high-purity V-4Cr4Ti alloys. The resulting products (NIFS-HEAT-1,2), were characterized by various research groups in the world including Chinese partners. South Western Institute of Physics (SWIP) fabricated a new V-4Cr-4Ti alloy (SWIP-Heat), and carried out a comparative evaluation of hydrogen embrittlement of NIFS-HEATs and SWIP-Heat. The tensile test of hydrogen-doped alloys showed that the NIFS-HEAT maintained the ductility to relatively high hydrogen levels.The comparison of the data with those of previous studies suggested that the reduced oxygen level in the NIFS-HEATs should be responsible for the increased resistance to hydrogen embrittlement.Based on the chemical analysis data of NIFS-HEATs and SWIP-Heats, neutron-induced activation was analyzed in Institute of Plasma Physics (IPP-CAS) as a function of cooling time after the use in the fusion first wall. The results showed that the low level of Co dominates the activity up to 50 years followed by a domination of Nb or Nb and Al in the respective alloys. It was suggested that reduction of Co and Nb, both of which are thought to have been introduced via cross-contamination into the alloys from the molds used should be crucial for reducing further the activation.

  8. Liquid eutectic alloys as a cluster solutions

    Directory of Open Access Journals (Sweden)

    I. Shcherba

    2008-11-01

    Full Text Available Purpose: In this research work the results of structure studies for Al0.88Si0.12, Bi0.995Cu0.005, Al0.83Cu0.17 eutecticand Co0.05Cu0.95 peritectic melts have been presented. The structure parameters of molten alloys are comparedwith ones for liquid pure components and with model values.Design/methodology/approach: The structure in liquid state has been studied with use of X-raydiffractometer containing special attachment for investigation of liquid metallic alloys. The system was equippedwith special camera for sample, filled with pure helium in order to avoid the oxidation. Experimental data wereinterpreted with using of random atomic distribution model and self-associated one.Findings: The research has shown that structure of liquid alloys Al0.88Si0.12, Bi0.995Cu0.005, Al0.83Cu0.17 andCo0.05Cu0.95 shows the deviation from random atomic distribution model and these alloys in liquid state attemperatures not far from melting point can be considered as cluster solutions.Practical implications: Existence of clusters in eutectic and peritectic melts influence the structure andproperties of corresponding solid alloys, that is important for casting, soldering, welding and at producing ofcomposite materials on the base of eutectic matrix.Originality/value: Cluster structure of eutectic melts is responsible for behaviour of structure and physicalchemicalproperties. The change of this structure allows to improve the properties of solidificated alloys, bothcrystalline and amorphous.

  9. The Influence of Alloy Composition and microstructure on the corrosion behaviour of Cu-Ni alloys in seawater

    NARCIS (Netherlands)

    Drolenga, L.J.P.; IJsseling, F.P.; Kolster, B.H.

    1983-01-01

    The aim of the study was to relate the general corrosion behaviour of CuNi 10-alloys in seawater with its iron content and microstructure. To that end the microstructure of four commercial alloys with various Fe-contents (1.20-1.78%) and there laboratory melted alloys with various Fe-contents (1.5-2

  10. Anode properties of alloy Zn 55 Al alloyed by calcium in the medium of NaCl

    International Nuclear Information System (INIS)

    The results of studies of influence of calcium additives on anode properties of zinc-aluminium alloy Zn 55 Al are given. Chemical composition and results of studies of corrosion-electrochemical properties of Zn 55 Al alloy alloyed by calcium are considered.

  11. Hydrogen pickup mechanism of zirconium alloys

    Science.gov (United States)

    Couet, Adrien

    Although the optimization of zirconium based alloys has led to significant improvements in hydrogen pickup and corrosion resistance, the mechanisms by which such alloy improvements occur are still not well understood. In an effort to understand such mechanisms, a systematic study of the alloy effect on hydrogen pickup is conducted, using advanced characterization techniques to rationalize precise measurements of hydrogen pickup. The hydrogen pick-up fraction is accurately measured for a specially designed set of commercial and model alloys to investigate the effects of alloying elements, microstructure and corrosion kinetics on hydrogen uptake. Two different techniques to measure hydrogen concentrations were used: a destructive technique, Vacuum Hot Extraction, and a non-destructive one, Cold Neutron Prompt Gamma Activation Analysis. The results indicate that hydrogen pickup varies not only from alloy to alloy but also during the corrosion process for a given alloy. For instance Zircaloy type alloys show high hydrogen pickup fraction and sub-parabolic oxidation kinetics whereas ZrNb alloys show lower hydrogen pickup fraction and close to parabolic oxidation kinetics. Hypothesis is made that hydrogen pickup result from the need to balance charge during the corrosion reaction, such that the pickup of hydrogen is directly related to (and indivisible of) the corrosion mechanism and decreases when the rate of electron transport or oxide electronic conductivity sigmao xe through the protective oxide increases. According to this hypothesis, alloying elements (either in solid solution or in precipitates) embedded in the oxide as well as space charge variations in the oxide would impact the hydrogen pick-up fraction by modifying sigmaox e, which drives oxidation and hydriding kinetics. Dedicated experiments and modelling were performed to assess and validate these hypotheses. In-situ electrochemical impedance spectroscopy (EIS) experiments were performed on Zircaloy-4 tubes

  12. Elastic anomalies in Fe-Cr alloys.

    Science.gov (United States)

    Zhang, Hualei; Wang, Guisheng; Punkkinen, Marko P J; Hertzman, Staffan; Johansson, Börje; Vitos, Levente

    2013-05-15

    Using ab initio alloy theory, we determine the elastic parameters of ferromagnetic and paramagnetic Fe(1-c)Cr(c) (0 ≤ c ≤ 1) alloys in the body centered cubic crystallographic phase. Comparison with the experimental data demonstrates that the employed theoretical approach accurately describes the observed composition dependence of the polycrystalline elastic moduli. The predicted single-crystal elastic constants follow complex anomalous trends, which are shown to originate from the interplay between magnetic and chemical effects. The nonmonotonic composition dependence of the elastic parameters has marked implications on the micro-mechanical properties of ferrite stainless steels. PMID:23604218

  13. Surface segregation in HAYNES 230 alloy

    International Nuclear Information System (INIS)

    The surface segregation in the Ni-based alloy HAYNES 230 was studied by Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy between 400 and 1100 deg. C. The qualitative variations of the surface contents of S, P, W, Mo, N, Si, and Mn were determined as a function of annealing temperature and time. It was found that at 925 deg. C the maximum coverage of sulphur at the alloy surface is in the range 0.06-0.15 monolayers. Chromium evaporation from the HAYNES 230 surface under UHV conditions is clearly evidenced for annealing at 1100 deg. C

  14. Surface segregation in HAYNES 230 alloy

    Science.gov (United States)

    Pop, D.; Wolski, K.

    2006-12-01

    The surface segregation in the Ni-based alloy HAYNES 230 was studied by Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy between 400 and 1100 °C. The qualitative variations of the surface contents of S, P, W, Mo, N, Si, and Mn were determined as a function of annealing temperature and time. It was found that at 925 °C the maximum coverage of sulphur at the alloy surface is in the range 0.06-0.15 monolayers. Chromium evaporation from the HAYNES 230 surface under UHV conditions is clearly evidenced for annealing at 1100 °C.

  15. Rapidly solidified titanium alloys by melt overflow

    Science.gov (United States)

    Gaspar, Thomas A.; Bruce, Thomas J., Jr.; Hackman, Lloyd E.; Brasmer, Susan E.; Dantzig, Jonathan A.; Baeslack, William A., III

    1989-01-01

    A pilot plant scale furnace was designed and constructed for casting titanium alloy strips. The furnace combines plasma arc skull melting techniques with melt overflow rapid solidification technology. A mathematical model of the melting and casting process was developed. The furnace cast strip of a suitable length and width for use with honeycomb structures. Titanium alloys Ti-6Al-4V and Ti-14Al-21 Nb were successfully cast into strips. The strips were evaluated by optical metallography, microhardness measurements, chemical analysis, and cold rolling.

  16. Model for magnetic-nonmagnetic binary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Razafimandimby, H. [Departement de Physique, Universite de Toliara, 601 Toliara (Madagascar); Randrianasoloharisoa, D. [LPMR, Universite d' Antananarivo (Madagascar); Rakotomahevitra, A. [Departement des Sciences Exactes, Universite de Mahajanga, BP 155 (Madagascar); Parlebas, J.C. [IPCMS, UMR 7504 CNRS-Universite Louis Pasteur, 23 rue du Loess, BP 43, 67034 Strasbourg (France)

    2007-10-15

    An extension of a mean-field approximation (MFA) developed within standard basis operators (SBO) is used to study magnetism in magnetic-nonmagnetic binary alloys. The Curie temperature is calculated from the free energy within the framework of the present approach. The calculated results are in fair agreement with the theoretical results of other research groups for the same problem but utilizing other methods. Finally, the case of NiPt alloys is briefly examined as an example test for the comparison with experiment. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. A bidirectional shape memory alloy folding actuator

    International Nuclear Information System (INIS)

    This paper presents a low-profile bidirectional folding actuator based on annealed shape memory alloy sheets applicable for meso- and microscale systems. Despite the advantages of shape memory alloys—high strain, silent operation, and mechanical simplicity—their application is often limited to unidirectional operation. We present a bidirectional folding actuator that produces two opposing 180° motions. A laser-patterned nickel alloy (Inconel 600) heater localizes actuation to the folding sections. The actuator has a thin ( < 1 mm) profile, making it appropriate for use in robotic origami. Various design parameters and fabrication variants are described and experimentally explored in the actuator prototype. (paper)

  18. Precipitation Hardenable High Temperature Shape Memory Alloy

    Science.gov (United States)

    Noebe, Ronald Dean (Inventor); Draper, Susan L. (Inventor); Nathal, Michael V. (Inventor); Crombie, Edwin A. (Inventor)

    2010-01-01

    A composition of the invention is a high temperature shape memory alloy having high work output, and is made from (Ni+Pt+Y),Ti(100-x) wherein x is present in a total amount of 49-55 atomic % Pt is present in a total amount of 10-30 atomic %, Y is one or more of Au, Pd. and Cu and is present in a total amount of 0 to 10 atomic %. The alloy has a matrix phase wherein the total concentration of Ni, Pt, and the one or more of Pd. Au, and Cu is greater than 50 atomic %.

  19. Methods for Electrodepositing Composition-Modulated Alloys

    DEFF Research Database (Denmark)

    Leisner, Peter; Nielsen, Christian Bergenstof; Tang, Peter Torben; Dörge, Tommy C.; Møller, Per

    1996-01-01

    Materials exhibiting unique mechanical, physical and chemical properties can be obtained by combining thin layers of different metals or alloys forming a multilayered structure. Two general techniques exist for electrodepositing composition-modulated alloy (CMA) materials; dual-bath and single......-bath plating. For both techniques a number of variations exist. The most suitable technique and variation for the manufacture of a certain CMA material is highly dependent on the metals included in the given CMA system and on the dimensions of the multilayered structure. In this paper, the main principles of...

  20. Formation of hydrides blisters in zirconium alloys

    International Nuclear Information System (INIS)

    The formation of zirconium hydrides blisters in zirconium alloys due to the presence of a thermal gradient is a possible phenomenon which may occur in structural components of a reactor (pressure tubes), thus resulting a very important matter for the nuclear industry. For this reason, a series of experiments were initiated in the Hydrogen Damage Laboratory so as to obtain blisters of zirconium alloys and to study the aspects related to them. Zry-4 and Zr-2.5% Nb blisters were obtained. The propagation of a fissure present in a blister and the fracture surface were observed. The fissure propagated weakly in the blister and stopped in the Zry-4 matrix. (Author)

  1. The irradiation effects on zirconium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Negut, Gh. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania)]. E-mail: joenegut@yahoo.com; Ancuta, M. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania); Radu, V. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania); Ionescu, S. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania); Stefan, V. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania); Uta, O. [Institute for Nuclear Research Pitesti, Campului Str., 1, Mioveni P.O. Box 78, 0300 Pitesti (Romania); Prisecaru, I. [University Politehnica Bucharest, Bucharest (Romania); Danila, N. [University Politehnica Bucharest, Bucharest (Romania)

    2007-05-31

    Pressure tube samples were irradiated under helium atmosphere in the TRIGA Steady State Research and Material Test Reactor of the Romanian Institute for Nuclear Research (INR). These samples are made of the Zr-2.5%Nb alloy used as structural material for the CANDU Romanian power reactors. After irradiation, mechanical tests were performed in the Post Irradiation Examination Laboratory (PIEL) to study the influence of irradiation on zirconium alloys mechanical behaviour. The tensile test results were used for structural integrity assessment. Results of the tests are presented. The paper presents, also, pressure tube structural integrity assessment.

  2. The irradiation effects on zirconium alloys

    International Nuclear Information System (INIS)

    Pressure tube samples were irradiated under helium atmosphere in the TRIGA Steady State Research and Material Test Reactor of the Romanian Institute for Nuclear Research (INR). These samples are made of the Zr-2.5%Nb alloy used as structural material for the CANDU Romanian power reactors. After irradiation, mechanical tests were performed in the Post Irradiation Examination Laboratory (PIEL) to study the influence of irradiation on zirconium alloys mechanical behaviour. The tensile test results were used for structural integrity assessment. Results of the tests are presented. The paper presents, also, pressure tube structural integrity assessment

  3. Mechanical Properties of Niobium Alloyed Gray Iron

    OpenAIRE

    Hanna, Ivil

    2011-01-01

    The influence of adding an amount of 0.1% and 0.3% niobium to the gray iron alloy used for brake discs, these disc materials are called disc 16 respective 17, have been investigated at RT (room temperature). That is together with two other alloys, the reference disc which contains 0.32% molybdenum but lacks niobium and another one with neither niobium nor molybdenum in it, this is called disc material 15. Focus in this thesis work is on the mechanical properties of the studied materials and f...

  4. Process for alloying uranium and niobium

    Science.gov (United States)

    Holcombe, Cressie E.; Northcutt, Jr., Walter G.; Masters, David R.; Chapman, Lloyd R.

    1991-01-01

    Alloys such as U-6Nb are prepared by forming a stacked sandwich array of uraniun sheets and niobium powder disposed in layers between the sheets, heating the array in a vacuum induction melting furnace to a temperature such as to melt the uranium, holding the resulting mixture at a temperature above the melting point of uranium until the niobium dissolves in the uranium, and casting the uranium-niobium solution. Compositional uniformity in the alloy product is enabled by use of the sandwich structure of uranium sheets and niobium powder.

  5. Liquid eutectic alloys as a cluster solutions

    OpenAIRE

    I. Shcherba; Shtablavyi, I.; S. Mudry

    2008-01-01

    Purpose: In this research work the results of structure studies for Al0.88Si0.12, Bi0.995Cu0.005, Al0.83Cu0.17 eutecticand Co0.05Cu0.95 peritectic melts have been presented. The structure parameters of molten alloys are comparedwith ones for liquid pure components and with model values.Design/methodology/approach: The structure in liquid state has been studied with use of X-raydiffractometer containing special attachment for investigation of liquid metallic alloys. The system was equippedwith...

  6. Electromagnetic Characterization Of Metallic Sensory Alloy

    Science.gov (United States)

    Wincheski, Russell A.; Simpson, John; Wallace, Terryl A.; Newman, John A.; Leser, Paul; Lahue, Rob

    2012-01-01

    Ferromagnetic shape-memory alloy (FSMA) particles undergo changes in both electromagnetic properties and crystallographic structure when strained. When embedded in a structural material, these attributes can provide sensory output of the strain state of the structure. In this work, a detailed characterization of the electromagnetic properties of a FSMA under development for sensory applications is performed. In addition, a new eddy current probe is used to interrogate the electromagnetic properties of individual FSMA particles embedded in the sensory alloy during controlled fatigue tests on the multifunctional material.

  7. Overlay metallic-cermet alloy coating systems

    Science.gov (United States)

    Gedwill, M. A.; Levine, S. R.; Glasgow, T. K. (Inventor)

    1984-01-01

    A substrate, such as a turbine blade, vane, or the like, which is subjected to high temperature use is coated with a base coating of an oxide dispersed, metallic alloy (cermet). A top coating of an oxidation, hot corrosion, erosion resistant alloy of nickel, cobalt, or iron is then deposited on the base coating. A heat treatment is used to improve the bonding. The base coating serves as an inhibitor to interdiffusion between the protective top coating and the substrate. Otherwise, the protective top coating would rapidly interact detrimentally with the substrate and degrade by spalling of the protective oxides formed on the outer surface at elevated temperatures.

  8. Vanadium-base alloys for fusion reactor applications

    International Nuclear Information System (INIS)

    Vanadium-base alloys offer potentially significant advantages over other candidate alloys as a structural material for fusion reactor first wall/blanket applications. Although the data base is more limited than that for the other leading candidate structural materials, viz., austenitic and ferritic steels, vanadium-base alloys exhibit several properties that make them particularly attractive for the fusion reactor environment. This paper presents a review of the structural material requirements, a summary of the materials data base for selected vanadium-base alloys, and a comparison of projected performance characteristics compared to other candidate alloys. Also, critical research and development (R and D) needs are defined

  9. Corrosion resistance of Mg-RE-Zr alloys

    OpenAIRE

    A. Kiełbus; J. Michalska; T. Rzychoń

    2007-01-01

    Purpose: Magnesium alloys are widely used in the automotive and aerospace industries. Data concerning corrosion of Mg alloys are numerous, but those concerning Mg-RE alloys are scarce. In this paper, the corrosion behavior of cast magnesium alloys containing rare earth elements (WE54, WE43 and Elektron21) were investigated by immersion test in 3.5% NaCl for times up to 7 days.Design/methodology/approach: The study was conducted on WE54, WE43 and Elektron 21 alloys in the as-cast condition. I...

  10. Indentation toughness of Mo5Si3-based alloys

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The indentation toughness of Mo5Si3 -based phases was studied with regard to different alloying elements, amount of alloying addition as well as the presence of secondary phases. Cr, Ti, Nb, Ni and Co were added as alloying elements. The results show that the indentation fracture toughness of Mo5Si3 increases with the alloying additions, from 2.4 Mpa *m1/2 for mon olithic to just over 3 Mpa*m1/2 for highly alloyed Mo5Si3. Small volume fractions of brittle secondary phases may have a positive impact on the inde ntation toughness; while larger fractions seems to lower the toughness.

  11. Neutron irradiation effect on thermomechanical properties of shape memory alloys

    International Nuclear Information System (INIS)

    Alloys of Ti-Ni, Ti-Ni-Pd, Fe-Mn-Si, Mn-Cu-Cr, Mn-Cu, Cu-Al-Mn, Cu-Al-Ni systems are investigated after irradiation in IVV-2M reactor at various temperatures with neutron fluence of 1019 - 1020 cm-2. The degradation of shape memory effect in titanium nickelide base alloys is revealed after irradiation. Mn-Cu and Mn-Cu-Cr alloys show the best results. Trends in shape memory alloy behaviour depending on irradiation temperature are found. A consideration is given to the possibility of using these alloys for components of power reactor control and protection systems

  12. Cold brittleness of commercial iron-manganese alloys

    International Nuclear Information System (INIS)

    Using dilatometric, roentgenographic and metallographic methods the structure of Fe-(2-54%) Mn commercial alloys is studied. A phase diagram and a diagram of direct and reverse martensite transformations are plotted. It is found that the maximum quantity of E-martensite is formed in an alloy with 16% Mn. The alloy purity decrease leads to increasing the cold brittleness threshold and decreasing impact strength of all Fe-Mn alloys. Commercial alloys with the optimum manganese content (22-25%) are recommended for operation at cryogenic temperatures down to -160 deg C

  13. New Stainless Steel Alloys for Low Temperature Surface Hardening?

    DEFF Research Database (Denmark)

    Christiansen, Thomas Lundin; Dahl, Kristian Vinter; Somers, Marcel A. J.

    2015-01-01

    The present contribution showcases the possibility for developing new surface hardenable stainless steels containing strong nitride/carbide forming elements (SNCFE). Nitriding of the commercial alloys, austenitic A286, and ferritic AISI 409 illustrates the beneficial effect of having SNCFE present...... in the stainless steel alloys. The presented computational approach for alloy design enables “screening” of hundreds of thousands hypothetical alloy systems by use of Thermo-Calc. Promising compositions for new stainless steel alloys can be selected based on imposed criteria, i.e. facilitating easy...

  14. Annex 5 - Fabrication of U-Al alloy

    International Nuclear Information System (INIS)

    Alloy U-Al with low content of aluminium is often used for fabrication of fuel elements because it is stable under moderate neutron flux density. Additionally this type of alloys show much better characteristics than pure uranium under reactor operating conditions (temperature, mechanical load, corrosion effect of water). This report contains the analysis of the phase diagram of U-Al alloy with low content of aluminium, applied procedure for alloying and casting with detailed description of equipment. Characteristics of the obtained alloy are described and conclusions about the experiment and procedure are presented

  15. Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys

    International Nuclear Information System (INIS)

    Highlights: • Cu based SMAs with high transition temperature could be made using LM route. • The properties depend on alloying composition. • Property characterisation establishes feasibility of making SMAs. - Abstract: The effect of alloying seven different elements [Zn, Si, Fe, Ni, Mg, Cr and Ti] on the microstructure, hardness, phase precipitation and transformation temperature in a Cu–12.5Al–5Mn alloy with a view to possible improvements as a result of these additions is the focus of the reported study. The base alloy has been chosen keeping in mind its ability to exhibit shape memory properties and improved ductility over other Cu-based SMAs. The objective was to ascertain changes or improvements attained due to the individual tertiary additions. The samples were prepared through liquid metallurgy route using pure copper, aluminum, manganese and the respective quaternary alloying elements in right quantities to weigh 1000 g of the alloy in total and were melted together. Samples from the cast alloys were subject to homogenisation treatment at 200 °C for 2 h in a muffle furnace and furnace cooled. Samples from the homogenised alloys were heated and held for 2 h at 920 °C followed by ice quenching to obtain the desired martensitic structure for shape memory behaviour. The alloys in the cast, homogenised and quenched conditions were metallographically polished to observe the martensitic phase formation mainly in quenched samples which is a pre requisite for exhibiting shape memory properties in these alloys. X-ray Diffraction studies were carried out on the cast and quenched samples using Cu Kα target; and the phases identified indicate martensitic phase precipitation; however in some cases the precipitation is incomplete. Differential Scanning Calorimetric [DSC] studies were carried out on quenched samples from room temperature to 600 °C maintaining a constant rate of 10 °C/min. Results indicate clear transformation peaks in all the samples which

  16. Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dasgupta, Rupa, E-mail: rupadasgupta@ampri.res.in; Jain, Ashish Kumar; Kumar, Pravir; Hussain, Shahadat; Pandey, Abhishek

    2015-01-25

    Highlights: • Cu based SMAs with high transition temperature could be made using LM route. • The properties depend on alloying composition. • Property characterisation establishes feasibility of making SMAs. - Abstract: The effect of alloying seven different elements [Zn, Si, Fe, Ni, Mg, Cr and Ti] on the microstructure, hardness, phase precipitation and transformation temperature in a Cu–12.5Al–5Mn alloy with a view to possible improvements as a result of these additions is the focus of the reported study. The base alloy has been chosen keeping in mind its ability to exhibit shape memory properties and improved ductility over other Cu-based SMAs. The objective was to ascertain changes or improvements attained due to the individual tertiary additions. The samples were prepared through liquid metallurgy route using pure copper, aluminum, manganese and the respective quaternary alloying elements in right quantities to weigh 1000 g of the alloy in total and were melted together. Samples from the cast alloys were subject to homogenisation treatment at 200 °C for 2 h in a muffle furnace and furnace cooled. Samples from the homogenised alloys were heated and held for 2 h at 920 °C followed by ice quenching to obtain the desired martensitic structure for shape memory behaviour. The alloys in the cast, homogenised and quenched conditions were metallographically polished to observe the martensitic phase formation mainly in quenched samples which is a pre requisite for exhibiting shape memory properties in these alloys. X-ray Diffraction studies were carried out on the cast and quenched samples using Cu Kα target; and the phases identified indicate martensitic phase precipitation; however in some cases the precipitation is incomplete. Differential Scanning Calorimetric [DSC] studies were carried out on quenched samples from room temperature to 600 °C maintaining a constant rate of 10 °C/min. Results indicate clear transformation peaks in all the samples which

  17. Characteristics of 14Cr-ODS ferritic alloy fabricated by mechanically alloying and microwave sintering

    Energy Technology Data Exchange (ETDEWEB)

    Zhenhua, Yao [State Key Laboratory of Materia Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Weihao, Xiong, E-mail: whxiong@mail.hust.edu.cn [State Key Laboratory of Materia Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Bin, Huang; Qingqing, Yang [State Key Laboratory of Materia Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Jiang, Jianjun [School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2015-06-15

    14Cr-ODS ferritic alloys were fabricated by microwave sintering and conventional vacuum sintering. The results showed that the sintering time could be reduced and the sintering temperature could be decreased effectively by adoption of microwave sintering. The tensile strength of the alloy microwave sintered at 1250 °C and the alloy vacuum sintered at 1350 °C were 691.4 MPa and 521.5 MPa respectively. The superior strength of microwave sintered one would be attributed to finer grain size, which was resulted from the shorter sintering time and lower sintering temperature. The elongation of microwave sintered alloy was worse than that of the vacuum sintering one. Nano-oxide precipitates were dispersed homogeneously in the Fe-based matrix, and their size was mostly ranged from several nm to more than 20 nm.

  18. Effect of alloying elements on the hydrogen embrittlement of medium-alloy deposited metal

    International Nuclear Information System (INIS)

    The effect was investigated of the main alloying elements in the metal of electrodes for welding steels upon the tendency to hydrogen embrittlement of medium-alloy built-up metal which was evaluated by the work of inception of cracks and by the work of crack propagation. Specimens from blanks were tested for static bending and rupture. It was established that when developing welding electrodes in was expedient to choose the alloying range of the built-up metal with due regard for the effect of alloying elements upon the hydrogen embrittlement. For a low content of diffusion hydrogen in the built-up metal, the work of inception of a crack diminishes with the increase in carbon, silicon, nickel and molybdenum contents. The work of crack propagation increases with the content of nickel ans varies according to a curve with a maxium as the contents of carbon, silicon, manganese and chromium rise

  19. Site Preference and Alloying Effect of Excess Ni in Ni–Mn–Ga Shape Memory Alloys

    International Nuclear Information System (INIS)

    The formation energies and electronic structures of Ni-rich Ni–Mn–Ga alloys have been investigated by first-principles calculations using the pseudopotential plane wave method based on density functional theory. The results show that the alloying Ni prefers to occupy the Mn site directly in Ni9Mn3Ga4 and to occupy the Mn site and drive the displaced Mn atom to the Ga site in Ni9Mn4Ga3, which is in accordance with the experimental result. According to the lattice constants and the density of states analyses, these site preference behaviours are closely related to the smaller lattice distortion and the lower-energy electronic structure when the excess Ni occupies the Mn site. The effect of Ni alloying on martensitic transformation is discussed and the enhancement of martensitic transformation temperature by Ni alloying is estimated by the calculated formation energy difference between austenite and martensite phases

  20. First principles analysis of hydrogen chemisorption on Pd-Re alloyed overlayers and alloyed surfaces

    DEFF Research Database (Denmark)

    Pallassana, Venkataraman; Neurock, Matthew; Hansen, Lars Bruno; Nørskov, Jens Kehlet

    2000-01-01

    Gradient corrected periodic density functional theory (DFT-GGA) slab calculations were used to examine the chemisorption of atomic hydrogen on various Pd-Re alloyed overlayers and uniformly alloyed surfaces. Adsorption was examined at 33% surface coverage, where atomic hydrogen preferred the three...... developed to extend the Hammer-Norskov surface reactivity model [Surf. Sci. 343, 211 (1995)] to the analysis of bimetallic Pd-Re alloyed systems. The hydrogen chemisorption energies are correlated linearly to the surface d-band center, which is weighted appropriately by the d-band coupling matrix elements...... for Pd and Re. The farther the weighted d-band center is shifted below the Fermi energy, the weaker is the interaction of atomic hydrogen with the alloyed Pd-Re surface. (C) 2000 American Institute of Physics....

  1. Site Preference and Alloying Effect of Excess Ni in Ni-Mn-Ga Shape Memory Alloys

    Institute of Scientific and Technical Information of China (English)

    CHEN Jie; LI Yan; SHANG Jia-Xiang; XU Hui-Bin

    2009-01-01

    @@ The formation energies and electronic structures of Ni-rich Ni-Mn-Ga alloys have been investigated by first-principles calculations using the pseudopotential plane wave method baaed on density functional theory. The results show that the alloying Ni prefers to occupy the Mn site directly in Ni9Mn3Ga4 and to occupy the Mn site and drive the displaced Mn atom to the Ga site in Ni9Mn4Ga3, which is in accordance with the experimental result. According to the lattice constants and the density of states analyses, these site preference behaviours are closely related to the smaller lattice distortion and the lower-energy electronic structure when the excess Ni occupies the Mn site. The effect of Ni alloying on martensitic transformation is discussed and the enhancement of martensitic transformation temperature by Ni alloying is estimated by the calculated formation energy difference between anstenite and martensite phases.

  2. The effect of alloying on the ordering processes in near-alpha titanium alloys

    International Nuclear Information System (INIS)

    The substructure of near-alpha Ti–Al–Sn–Zr–Mo–Si alloys containing up to 12.5 at% aluminum was studied by transmission electron microscopy (TEM). It was shown that long-range order sections are formed at aging temperatures up to 500 °C in alloys, high in aluminum, and the ordered phase is formed by the nucleation and growth mechanism at 700 °C aging temperatures. Causes of changing the phase transformation mechanism have been discussed, and the relationship between the structure and properties of alloys, depending on modes of heat treatment has been analyzed. Also the influence of aluminides and silicides precipitation on the mechanical alloy properties after aging was examined. It was shown that the aluminide formation led to a slight hardening and a significant viscosity decrease. The silicide particles formation reduced the heat resistance properties, due to the depletion of the solid solution by silicon

  3. The effect of alloying on the ordering processes in near-alpha titanium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Popov, Artemiy, E-mail: p.artemii@mail.ru [Ural Federal University named after the first President of Russia B.N. Yeltsin, 19 Mira Street, Ekaterinburg 620002 (Russian Federation); Rossina, Natalya [Ural Federal University named after the first President of Russia B.N. Yeltsin, 19 Mira Street, Ekaterinburg 620002 (Russian Federation); Popova, Maria, E-mail: pmaria777@mail.ru [Ural Federal University named after the first President of Russia B.N. Yeltsin, 19 Mira Street, Ekaterinburg 620002 (Russian Federation)

    2013-03-01

    The substructure of near-alpha Ti–Al–Sn–Zr–Mo–Si alloys containing up to 12.5 at% aluminum was studied by transmission electron microscopy (TEM). It was shown that long-range order sections are formed at aging temperatures up to 500 °C in alloys, high in aluminum, and the ordered phase is formed by the nucleation and growth mechanism at 700 °C aging temperatures. Causes of changing the phase transformation mechanism have been discussed, and the relationship between the structure and properties of alloys, depending on modes of heat treatment has been analyzed. Also the influence of aluminides and silicides precipitation on the mechanical alloy properties after aging was examined. It was shown that the aluminide formation led to a slight hardening and a significant viscosity decrease. The silicide particles formation reduced the heat resistance properties, due to the depletion of the solid solution by silicon.

  4. Structure of nanocomposites of Al–Fe alloys prepared by mechanical alloying and rapid solidification processing

    Indian Academy of Sciences (India)

    S S Nayak; B S Murty; S K Pabi

    2008-06-01

    Structures of Al-based nanocomposites of Al–Fe alloys prepared by mechanical alloying (MA) and subsequent annealing are compared with those obtained by rapid solidification processing (RSP). MA produced only supersaturated solid solution of Fe in Al up to 10 at.% Fe, while for higher Fe content up to 20 at.% the nonequilibrium intermetallic Al5Fe2 appeared. Subsequent annealing at 673 K resulted in more Al5Fe2 formation with very little coarsening. The equilibrium intermetallics, Al3Fe (Al13Fe4), was not observed even at this temperature. In contrast, ribbons of similar composition produced by RSP formed fine cellular or dendritic structure with nanosized dispersoids of possibly a nano-quasicrystalline phase and amorphous phase along with -Al depending on the Fe content in the alloys. This difference in the product structure can be attributed to the difference in alloying mechanisms in MA and RSP.

  5. Shear strength developments during shock loading in tantalum alloys: Effects of cold work and alloying

    International Nuclear Information System (INIS)

    The development of shear strength behind the shock front in tantalum alloys of 2.5 and 10 wt% tungsten has been monitored by the use of laterally mounted stress gauges. Results show that in common with pure tantalum, shear strength decreases behind the shock front. At 2.5 wt%, we believe that tungsten modifies the mechanical response by mitigating the effects of interstitial solute atoms, thus easing dislocation motion, as evidenced by the smaller reduction in shear strength compared to pure tantalum. At higher tungsten levels, it would appear that this is overcome by an overall increase in Peierls stress, which renders dislocation motion more difficult, thus giving the alloy a response more in common with that of the pure metal. Cold rolling of the 2.5% W alloy also appears to increase shear strength reduction behind the shock front (compared to the annealed alloy), although at present the reasons for this are unclear.

  6. Anodic behavior of alloy 22 in bicarbonate containing media: Effect of alloying

    International Nuclear Information System (INIS)

    Alloy 22 is one of the candidates for the manufacture of high level nuclear waste containers. These containers provide services in natural environments characterized by multi-ionic solutions.It is estimated they could suffer three types of deterioration: general corrosion, localized corrosion (specifically crevice corrosion) and stress corrosion cracking (SCC). It has been confirmed that the presence of bicarbonate and chloride ions is necessary to produce cracking, . It has also been determined that the susceptibility to SCC could be related to the occurrence of an anodic peak in the polarization curves in these media at potentials below transpassivity. The aim of this work is to study the effect of alloying elements on the anodic behavior of Alloy 22 in media containing bicarbonate and chloride ions at different concentrations and temperatures. Polarization curves were made on alloy 22 (Ni-22% Cr-13% Mo), Ni-Mo (Ni-28, 5% Mo) and Ni-Cr (Ni-20% Cr) in the following solutions: 1 mol/L NaCl at 90oC, and 1.148 mol/L NaHCO3; 1.148 mol/L NaHCO3 + 1 mol/L NaCl; 1.148 mol/L NaHCO3 + 0.1 mol/L NaCl, at 90oC, 75oC, 60oC and 25oC. It was found that alloy 22 has a anodic current density peak at potentials below transpassivity, only in the presence of bicarbonate ions. Curves performed in 1 mol/L NaCl did not show any anodic peak, in any of the tested alloys. The curves made on alloys Ni-Mo and Ni-Cr in the presence of bicarbonate ions, allowed to determine that Cr, is responsible for the appearance of the anodic peak in alloy 22. The curves of alloy Ni-Mo showed no anodic peak in the studied conditions. The potential at which the anodic peak appears in alloy 22 and Ni-Cr alloy, increases with decreasing temperature. The anodic peak was also affected by solution composition. When chloride ion is added to bicarbonate solutions, the anodic peak is shifted to higher potential and current densities, depending on the concentration of added chloride ions (author)

  7. Mechanical performance of heat treated 319 alloys as a function of alloying and aging parameters

    International Nuclear Information System (INIS)

    Highlights: ► Alloying additions effect on tensile properties of 319 alloys. ► Aging parameters effect on the tensile properties and fracture surface. ► Factorial design evaluates the statistically significant alloying and aging conditions. -- Abstract: An investigation was carried out to determine the effect of Mg, Sr, and Ti additions and artificial T5 and T6 aging treatments on the tensile properties of 319 alloys, with the aim of adjusting these parameters to produce castings with suitable mechanical properties. A statistical DOE model was also developed for the analysis of the correlation between the properties of alloy and independent parameters (composition and aging conditions). The microstructure and fracture of the alloy were examined using scanning electron microscopy. The obtained results show that addition of Ti to alloys containing Mg and Sr produces sounder casting with finer grain size and improves the alloy strength. Excess amounts of Sr, however, deteriorate the tensile properties of alloys containing high Mg content by increasing the total amount of Mg–Sr intermetallic phase and porosity. Fine and dense precipitates with a smaller inter-particle spacing are formed at a lower aging temperature of 150 °C compared to coarse, less dense and more widely dispersed at higher temperature, i.e., 250 °C. The strength of 319 alloys increases with the Mg content and decreases with Sr and aging temperature and time. Increasing the Mg content up to 0.45% enhances the alloy response to heat treatment in the T5 and T6 tempers, more particularly, in the latter case. Fracture of intermetallic phases in the interdendritic regions is mostly brittle, with the formation of microcracks at the interface between Si, Cu, Fe-base intermetallic particles and aluminum. From the statistical analysis, the most effective parameters on the tensile properties were Mg content and aging temperature. The interaction between Mg content and aging temperature and/or aging

  8. Phase evolution and alloying mechanism of titanium aluminide nanoparticles

    International Nuclear Information System (INIS)

    Highlights: • An evolution of phase composition of TiAl alloy nanoparticles was investigated. • An alloying mechanism was analyzed according to the variation of phase composition. • The alloying reaction was possible to perform between the small clusters of Ti and Al. • The alloying product is determined by the temperature of Ti and Al small clusters. • The alloying mechanism can be explained based on Gibbs free energy of alloying reaction. - Abstract: The evolution of phase composition of titanium aluminide nanoparticles synthesized by the flow-levitation method was systematically investigated by adjustment of the evaporating temperature of the mixed metallic droplet and the X-ray diffraction spectrum. Their alloying mechanism was analyzed according to the variation of phase composition. ε(h, l)-TiAl3, γ-TiAl and α2-Ti3Al phases are gradually formed in TiAl alloy nanoparticles with the increasing of evaporating temperature of the mixed droplet. The alloying reaction is possible to perform between the small clusters of Ti and Al during the cooling process with high cooling rate. And the alloying mechanism can be explained based on the Gibbs free energy of alloying reaction of Ti and Al small clusters

  9. Microstructure and properties of 2618-Ti heat resistant aluminum alloy

    Institute of Scientific and Technical Information of China (English)

    王建华; 易丹青; 王斌

    2003-01-01

    The mechanical properties of alloy 2618 with 0.5%(mass fraction) titanium and its microstructures in different states such as as-cast and quenching-aging were investigated. Titanium was added into the alloy with Al-5%Ti master alloy that was extruded severely. Al3Ti particles in the microstructure of cast alloy 2618-Ti are very small because those of master alloy are also small. When titanium is used as an alloying element, it does not affect the morphology of Al9FeNi phase in cast alloy, but decreases the grain size of as-cast alloy remarkably. The grain size of quenching-aging alloy 2618 decreases apparently due to the existence of a great deal of dispersive Al3Ti particles. Adding 0.5%Ti has no effect on the room temperature tensile properties of alloy 2618, but apparently increases the elevated temperature instantaneous tensile properties and that of the alloy which is exposed at 250 ℃ for 100 h.

  10. Microstructure and corrosion behavior of Mg-Zn-Ag alloys

    International Nuclear Information System (INIS)

    The majority of Mg components currently in use in the automotive and electronic industries are produced by conventional casting processes. However, there is a strong need to develop new high strength wrought alloys for wide-spread application of Mg alloys in near future. In the present study, new Mg-Zn-Ag alloys were developed and characterized. In order to evaluate the effects of Ag addition on the mechanical properties of the extruded Mg-Zn alloys, the age hardening response and mechanical properties were examined with different amounts of alloying element. The microstructures of the specimens were examined with optical microscopy and transmission electron microscopy. The grain sizes of the alloys in as-extruded condition were markedly reduced with the addition of Ag. The hardness was found to increase more rapidly in the alloys with double aging treatment compared to those with single aging treatment. The peak hardness was also found to be higher in the alloys with double aging treatment. In all heat treatment conditions, the hardnesses of the Mg-Zn-Ag alloys were found to be higher than those of the Mg-Zn alloys. Moreover, the addition of Ag to the Mg-Zn alloys increased the corrosion rate measured by immersion test

  11. Phase evolution and alloying mechanism of titanium aluminide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Luo, J.S.; Li, K.; Li, X.B. [Research Center of Laser Fusion, Science and Technology on Plasma Physics Laboratory, China Academy of Engineering Physics, Mianyang 621900 (China); Shu, Y.J. [Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang 621900 (China); Tang, Y.J., E-mail: tangyongjian2000@sina.com [Research Center of Laser Fusion, Science and Technology on Plasma Physics Laboratory, China Academy of Engineering Physics, Mianyang 621900 (China)

    2014-12-05

    Highlights: • An evolution of phase composition of TiAl alloy nanoparticles was investigated. • An alloying mechanism was analyzed according to the variation of phase composition. • The alloying reaction was possible to perform between the small clusters of Ti and Al. • The alloying product is determined by the temperature of Ti and Al small clusters. • The alloying mechanism can be explained based on Gibbs free energy of alloying reaction. - Abstract: The evolution of phase composition of titanium aluminide nanoparticles synthesized by the flow-levitation method was systematically investigated by adjustment of the evaporating temperature of the mixed metallic droplet and the X-ray diffraction spectrum. Their alloying mechanism was analyzed according to the variation of phase composition. ε(h, l)-TiAl{sub 3,} γ-TiAl and α{sub 2}-Ti{sub 3}Al phases are gradually formed in TiAl alloy nanoparticles with the increasing of evaporating temperature of the mixed droplet. The alloying reaction is possible to perform between the small clusters of Ti and Al during the cooling process with high cooling rate. And the alloying mechanism can be explained based on the Gibbs free energy of alloying reaction of Ti and Al small clusters.

  12. Dispersoid reinforced alloy powder and method of making

    Science.gov (United States)

    Anderson, Iver E.; Terpstra, Robert L.

    2012-06-12

    A method of making dispersion-strengthened alloy particles involves melting an alloy having a corrosion and/or oxidation resistance-imparting alloying element, a dispersoid-forming element, and a matrix metal wherein the dispersoid-forming element exhibits a greater tendency to react with a reactive species acquired from an atomizing gas than does the alloying element. The melted alloy is atomized with the atomizing gas including the reactive species to form atomized particles so that the reactive species is (a) dissolved in solid solution to a depth below the surface of atomized particles and/or (b) reacted with the dispersoid-forming element to form dispersoids in the atomized particles to a depth below the surface of said atomized particles. The atomized alloy particles are solidified as solidified alloy particles or as a solidified deposit of alloy particles. Bodies made from the dispersion strengthened alloy particles, deposit thereof, exhibit enhanced fatigue and creep resistance and reduced wear as well as enhanced corrosion and/or oxidation resistance at high temperatures by virtue of the presence of the corrosion and/or oxidation resistance imparting alloying element in solid solution in the particle alloy matrix.

  13. Virtual examinations of alloying elements influence on alloy structural steels mechanical properties

    OpenAIRE

    L.A. Dobrzański; R. Honysz

    2011-01-01

    Purpose: The paper introduces analysis results of selected alloying elements influence on mechanical properties of alloy structural steels for quenching and tempering.Design/methodology/approach: Investigations were performed in virtual environment with use of materials science virtual laboratory. Virtual investigations results were verified in real investigative laboratory.Findings: Materials researches performed with use of material science virtual laboratory in range of determining the mec...

  14. Corrosion and wear protective composition modulated alloy coatings based on ternary Ni-P-X alloys

    DEFF Research Database (Denmark)

    Leisner, P.; Benzon, M. E.; Christoffersen, Lasse; Panagopoulos, C. N.; Papachristos, V. D.; Katsikis, S.

    Scattered reporting in the litterature describes a number of ternary Ni-P-X alloyes (where X can be Co, Cr, Cu, Mo, Pd, Re or W) with promising corrosin and wear protective performance. Based on a systematic study of Ni-P-X alloys it is the intention to produce coatings with improved corrosion and...... wear performance compared with conventional coatings like electroless nickel, hard chromioum and anodised aluminium....

  15. Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems

    Science.gov (United States)

    Tang, Zhi; Gao, Michael C.; Diao, Haoyan; Yang, Tengfei; Liu, Junpeng; Zuo, Tingting; Zhang, Yong; Lu, Zhaoping; Cheng, Yongqiang; Zhang, Yanwen; Dahmen, Karin A.; Liaw, Peter K.; Egami, Takeshi

    2013-12-01

    The crystal lattice type is one of the dominant factors for controlling the mechanical behavior of high-entropy alloys (HEAs). For example, the yield strength at room temperature varies from 300 MPa for the face-centered-cubic (fcc) structured alloys, such as the CoCrCuFeNiTi x system, to about 3,000 MPa for the body-centered-cubic (bcc) structured alloys, such as the AlCoCrFeNiTi x system. The values of Vickers hardness range from 100 to 900, depending on lattice types and microstructures. As in conventional alloys with one or two principal elements, the addition of minor alloying elements to HEAs can further alter their mechanical properties, such as strength, plasticity, hardness, etc. Excessive alloying may even result in the change of lattice types of HEAs. In this report, we first review alloying effects on lattice types and properties of HEAs in five Al-containing HEA systems: Al x CoCrCuFeNi, Al x CoCrFeNi, Al x CrFe1.5MnNi0.5, Al x CoCrFeNiTi, and Al x CrCuFeNi2. It is found that Al acts as a strong bcc stabilizer, and its addition enhances the strength of the alloy at the cost of reduced ductility. The origins of such effects are then qualitatively discussed from the viewpoints of lattice-strain energies and electronic bonds. Quantification of the interaction between Al and 3 d transition metals in fcc, bcc, and intermetallic compounds is illustrated in the thermodynamic modeling using the CALculation of PHAse Diagram method.

  16. A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

    OpenAIRE

    Yiping Lu; Yong Dong; Sheng Guo; Li Jiang; Huijun Kang; Tongmin Wang; Bin Wen; Zhijun Wang; Jinchuan Jie; Zhiqiang Cao; Haihui Ruan; Tingju Li

    2014-01-01

    High-entropy alloys (HEAs) can have either high strength or high ductility, and a simultaneous achievement of both still constitutes a tough challenge. The inferior castability and compositional segregation of HEAs are also obstacles for their technological applications. To tackle these problems, here we proposed a novel strategy to design HEAs using the eutectic alloy concept, i.e. to achieve a microstructure composed of alternating soft fcc and hard bcc phases. As a manifestation of this co...

  17. Titanium Alloys and Processing for High Speed Aircraft

    Science.gov (United States)

    Brewer, William D.; Bird, R. Keith; Wallace, Terryl A.

    1996-01-01

    Commercially available titanium alloys as well as emerging titanium alloys with limited or no production experience are being considered for a variety of applications to high speed commercial aircraft structures. A number of government and industry programs are underway to improve the performance of promising alloys by chemistry and/or processing modifications and to identify appropriate alloys and processes for specific aircraft structural applications. This paper discusses some of the results on the effects of heat treatment, service temperatures from - 54 C to +177 C, and selected processing on the mechanical properties of several candidate beta and alpha-beta titanium alloys. Included are beta alloys Timetal 21S, LCB, Beta C, Beta CEZ, and Ti-10-2-3 and alpha-beta alloys Ti-62222, Ti-6242S, Timetal 550, Ti-62S, SP-700, and Corona-X. The emphasis is on properties of rolled sheet product form and on the superplastic properties and processing of the materials.

  18. High strength beta titanium alloys: New design approach

    International Nuclear Information System (INIS)

    A novel approach for development of high strength and ductile beta titanium alloys was proposed and successfully applied. The microstructure of the designed alloys is fully composed of a bcc β-Ti phase exhibiting dendritic morphology. The new Ti68.8Nb13.6Cr5.1Co6Al6.5 (at%) alloy (BETAtough alloy) exhibits a maximum tensile strength of 1290±50 MPa along with 21±3% of fracture strain. The specific energy absorption value upon mechanical deformation of the BETAtough alloy exceeds that of Ti-based metallic glass composites and commercial high strength Ti-based alloys. The deformation behavior of the new alloys was correlated with their microstructure by means of in-situ studies of the microstructure evolution upon tensile loading in a scanning electron microscope

  19. Corrosion Behaviour of Al Alloys in Sea Water

    International Nuclear Information System (INIS)

    The electrochemical behaviour of aluminum (Al) alloys in seawater medium was investigated using potentiodynamic technique, complemented by Scanning Electron Microscopy (SEM) and EDAX. SEM was used to characterize the corroded surface and to observe the extent of corrosion attack on the Al alloys after tested in seawater. EDAX analysis was used to identify elements present on the specimen surface. The results indicate that influences of alloying elements present in the Al alloys play important role in the corrosion of Al alloys in seawater. The behaviour of Al alloys with addition of Zn, Sn, Cu and Si was greatly enhanced in terms of its potential and corrosion behaviour. Potential of Al with alloying elements reached value more negative than -0.9 VSCE and showed active corrosion behaviour.

  20. Performance of stainless steel treated by plasma niobium alloying

    International Nuclear Information System (INIS)

    Nb alloyed layer was prepared by plasma surface alloying technology on surface of stainless steel substrates. Microstructure morphology, depth profiling of the elemental composition and phase structure of the alloyed layer were analyzed. Corrosion performance of the Nb alloyed layer was investigated. The results show that the optimum parameters were: temperature, 1100 degree C; air pressure, 80 Pa, holding time 3 h, source voltage, 900-700 V; and cathode voltage, 600-450 V. The thickness of Nb alloyed layer was about 60 μm. The alloyed layer was mainly composed of NbC and Nb6C5, Cr2Nb and Fe2Nb. The surface Nb content was 50%, which decreased sharply in the first several microns of depths and then gradually in further depths. The Nb alloyed layer has improved resistance to intergranular corrosion and uniform corrosion. (authors)

  1. Beta titanium alloys and their role in the titanium industry

    Science.gov (United States)

    Bania, Paul J.

    1994-07-01

    The class of titanium alloys generically referred to as the beta alloys is arguably the most versatile in the titanium family. Since these alloys offer the highest strength-to-weight ratios and deepest hardenability of all titanium alloys, one might expect them to compete favorably for a variety of aerospace applications. To the contrary, however, except for one very successful application (Ti-13V-11Cr-3Al on the SR-71), the beta alloys have remained a very small segment of the industry. As a perspective on this situation, this article reviews some past and present applications of titanium alloys. It also descibes some unique new alloys and applications that promise to reverse historical trends.

  2. In vitro and in vivo studies on biodegradable magnesium alloy

    Directory of Open Access Journals (Sweden)

    Lida Hou

    2014-10-01

    Full Text Available The microstructure, mechanical property, electrochemical behavior and biocompatibility of magnesium alloy (BioDe MSM™ were studied in the present work. The experimental results demonstrated that grain refining induced by extrusion improves the alloy strength significantly from 162 MPa for the as-cast alloy to 241 MPa for the as-extruded one. The anticorrosion properties of the as-extruded alloy also increased. Furthermore, the hemolysis ratio was decreased from 4.7% for the as-cast alloy to 2.9% for the as-extruded one, both below 5%. BioDe MSM™ alloy shows good biocompatibility after being implanted into the dorsal muscle and the femoral shaft of the New Zealand rabbit, respectively, and there are no abnormalities after short-term implantation. In vivo observation indicated that the corrosion rate of this alloy varies with different implantation positions, with higher degradation rate in the femur than in the muscle.

  3. Effect of alloying elements Zr,Cr,V on corrosion behavior of Ti-Ni-Nb shape memory alloy

    International Nuclear Information System (INIS)

    In this paper, by testing anodic polarization curves of Ti-Ni-Nb based shape memory alloys, the stability of passive film was investigated after alloying with elements Zr,Cr,V. In artificial sea water (3.5%NaCl) and physiological solution (5%NaCl+0.1%H2O2), the results show that the alloying elements influence the corrosion behavior of Ti-Ni-Nb alloy. Generally, Zr improves the corrosion resistance of Ti-Ni-Nb alloy, Cr reduces its corrosion resistance and V does not change the property. (orig.)

  4. Development of Strip Casting Technology in Rare Earth Permanent Magnet Alloys and Hydrogen Storage Alloys in China

    Institute of Scientific and Technical Information of China (English)

    Han Weiping; Guo Binglin; Yu Xiaojun; Zhu Jinghan; Cheng Xinghua

    2007-01-01

    The SC technique is now being applied widely in material preparation, especially in rare earth functional materials in virtue of its advanced process and high performance product. The applications of SC technique in rare earth permanent magnet alloys and hydrogen storage alloys were analyzed integrative, on the basis of summary of SC technique development in this paper. The paper mainly includes development history of SC technology, effect of SC technology on alloy microstructure, application of SC technology in RE storage hydrogen alloy and sintered Nd-Fe-B alloy, development of SC equipment and SC product industry. At the same time, the paper points out the existing problem of SC products.

  5. Effect of mechanical alloying on FeCrC reinforced Ni alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yilmaz, S. Osman [Univ. of Namik Kemal, Tekirdag (Turkey); Teker, Tanju [Adiyaman Univ. (Turkey). Dept. of Metallurgical and Materials Engineering; Demir, Fatih [Batman Univ. (Turkey)

    2016-05-01

    Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites (IMCs) of Ni-Al reinforced by M{sub 7}C{sub 3} were produced by powder metallurgical routes via solid state reaction of Ni, Al and M{sub 7}C{sub 3} particulates by mechanical alloying processes. Ni, Al and M{sub 7}C{sub 3} powders having 100 μm were mixed, mechanical alloyed and the compacts were combusted in a furnace. The mechanically alloyed (MAed) powders were investigated by X-ray diffraction (XRD), microhardness measurement, optic microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The presence of the carbides depressed the formation of unwanted NiAl intermetallic phases. The mechanical alloyed M{sub 7}C{sub 3} particles were unstable and decomposed partially within the matrix during alloying and sintering, and the morphology of the composites changed with the dissolution ratio of M{sub 7}C{sub 3} and sintering temperature.

  6. Microstructure and Mechanical Properties of Solution Heat-Treated Alloy 617 ODS Alloy

    International Nuclear Information System (INIS)

    Alloy 617 is a solution hardened Ni-based Superalloy containing Cr, Co, Mo, and Fe, and is among the best candidate materials for the key components of VHTR (Very High Temperature Reactor) system. As an alternative, Oxide Dispersion Strengthened (ODS) Ni-based superalloys, are known to possess superior high temperature mechanical properties and long-term high temperature microstructural stability due to the nano sized oxide dispersoids, which effectively hinder the dislocation motion at high temperature. This study is focused on the fabrication and characterization of nanosized oxide dispersion strengthened alloy 617. The influences of alloy composition and processing variables such as the content of Y2O3, hot extrusion ratio, and hydrogen reduction on the microstructure and mechanical properties were studied. From the analyses of microstructure of solution heat treated Alloy 617 ODS alloy specimens, a proper solid solution heat treatment temperature to reduce carbides is 1250 .deg. C. The major phases present in the alloy 617 ODS were found to be M23C6 and Al-O

  7. Effect of mechanical alloying on FeCrC reinforced Ni alloys

    International Nuclear Information System (INIS)

    Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites (IMCs) of Ni-Al reinforced by M7C3 were produced by powder metallurgical routes via solid state reaction of Ni, Al and M7C3 particulates by mechanical alloying processes. Ni, Al and M7C3 powders having 100 μm were mixed, mechanical alloyed and the compacts were combusted in a furnace. The mechanically alloyed (MAed) powders were investigated by X-ray diffraction (XRD), microhardness measurement, optic microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The presence of the carbides depressed the formation of unwanted NiAl intermetallic phases. The mechanical alloyed M7C3 particles were unstable and decomposed partially within the matrix during alloying and sintering, and the morphology of the composites changed with the dissolution ratio of M7C3 and sintering temperature.

  8. Atmospheric corrosion of uranium-carbon alloys

    International Nuclear Information System (INIS)

    The authors study the corrosion of uranium-carbon alloys having compositions close to that of the mono-carbide; they show that the extent of the observed corrosion effects increases with the water vapour content of the surrounding gas and they conclude that the atmospheric corrosion of these alloys is due essentially to the humidity of the air, the effect of the oxygen being very slight at room temperature. They show that the optimum conditions for preserving U-C alloys are either a vacuum or a perfectly dry argon atmosphere. The authors have also established that the type of corrosion involved is a corrosion which 'cracks under stress' and is transgranular (it can also be intergranular in the case of sub-stoichiometric alloys). They propose, finally, two hypotheses for explaining this mechanism, one of which is illustrated by the existence, at the fissure interface, of corrosion products which can play the role of 'corners' in the mono-carbide grains. (authors)

  9. Hydrogenation properties of Mg-Al alloys

    DEFF Research Database (Denmark)

    Andreasen, Anders

    2008-01-01

    . Further, it is found that the kinetics of hydrogenation, as well dehydrogenation, may be significantly improved by alloying compared to pure Mg. The expense of these improvements of the hydrogenation/dehydrogenation properties is a lower gravimetric hydrogen density in the hydrogenated product, (C) 2008...

  10. Reduction in Defect Content in ODS Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ritherdon, J.; Jones, A.R.

    2000-02-01

    The work detailed within this report is a continuation of earlier work that was carried out under contract number IDX-SY382V. The earlier work comprised a literature review of the sources and types of defects found principally in Fe-based ODS alloys together with a series of experiments designed to identify defects in ODS Fe{sub 3}Al material and recommend methods of defect reduction. Defects found in the Mechanically Alloyed (MA) ODS Fe{sub 3}Al included regions of incomplete MA, porosity, intrusions and fine-grained stringers. Some defects tended to be found in association with one another e.g. intrusions and fine-grained stringers. Preliminary powder separation experiments were also performed. The scope and objectives of the present work were laid out in the technical proposal ``Reduction in Defect Content in ODS Alloys--II'' which formed the basis of amendment 3 of the current contract. The current studies were devised in the context of the preceding work with a view to extending and concluding certain experiments while exploring new avenues of investigation of defect control and reduction where appropriate. All work proposed was within the context of achieving an ODS Fe{sub 3}Al alloy of improved overall quality and potential creep performance (particularly) in the consolidated, release condition. The interim outturn of the experimental work performed is also reported.

  11. Atomic displacements in bcc dilute alloys

    Indian Academy of Sciences (India)

    Hitesh Sharma; S Prakash

    2007-04-01

    We present here a systematic investigation of the atomic displacements in bcc transition metal (TM) dilute alloys. We have calculated the atomic displacements in bcc (V, Cr, Fe, Nb, Mo, Ta and W) transition metals (TMs) due to 3d, 4d and 5d TMs at the substitutional site using the Kanzaki lattice static method. Wills and Harrison interatomic potential is used to calculate the atomic force constants, the dynamical matrix and the impurity-induced forces. We have thoroughly investigated the atomic displacements using impurities from 3d, 4d and 5d series in the same host metal and the same impurity in different hosts. We have observed a systematic pattern in the atomic displacements for Cr-, Fe-, Nb-, Mo-, Ta- and W-based dilute alloys. The atomic displacements are found to increase with increase in the number of d electrons for all alloys considered except for V dilute alloys. The 3d impurities are found to be more easily dissolved in the 3d host metals than 4d or 5d TMs whereas 4d and 5d impurities show more solubility in 4d and 5d TMs. In general, the relaxation energy calculation suggests that impurities may be easily solvable in 5d TM hosts when compared to 3d or 4d TMs.

  12. Steam generated conversion coating on aluminium alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan

    into functional conversion coatings in order to enhance corrosion resistance and adhesion to paint systems. Chromium based conversion coatings have been extensively used on aluminium alloys to improve adhesion of subsequent paint layers and corrosion resistance. However, the use of hexavalent chromium...

  13. Hydrogen environment embrittlement of turbine disk alloys

    International Nuclear Information System (INIS)

    Differences in reported data on properties of turbine disk materials are examined. Results confirm previous results that Udimet 700 bar stock is severely embrittled when tested in gaseous hydrogen. This extreme sensitivity to embrittlement of Udimet 700 is presumably related to its microstructure. Results that Astroloy forgings exhibit a high degree of resistance to hydrogen environment embrittlement during short-term testing, and possibly long-term testing are also confirmed. Therefore, this alloy could be considered for use as the turbine disk alloy for advanced versions of the APU, thereby permitting an increased turbine inlet temperature and/or higher rotational speed than possible with V-57. V-57 is an iron-base superalloy (stable austenitic stainless steel) and is a member of a class of alloys generally quite resistant to hydrogen environment embrittlement. The results of investigation demonstrate the good resistance of V-57 alloy to embrittlement only during short-term tensile testing. Significant reductions in creep and rupture lives, as well as post-creep residual ductility, were determined. Despite these laboratory results, V-57 turbine disks successfully completed short-time performance testing in the experimental APU

  14. Casting of Titanium and its Alloys

    OpenAIRE

    R. L. Saha; K. T. Jacob

    1986-01-01

    Titaniuni and its alloys have many applications in aerospace, marine and other engineering industries. Titanium requires special melting techniques because of its high reactivity at elevated temperatures and needs special mould materials and methods for castings. This paper reviews the development of titanium casting technology.

  15. Casting of Titanium and its Alloys

    Directory of Open Access Journals (Sweden)

    R. L. Saha

    1986-04-01

    Full Text Available Titaniuni and its alloys have many applications in aerospace, marine and other engineering industries. Titanium requires special melting techniques because of its high reactivity at elevated temperatures and needs special mould materials and methods for castings. This paper reviews the development of titanium casting technology.

  16. Surface heat treatment of zirconium alloy

    International Nuclear Information System (INIS)

    A body composed of a zirconium alloy is afforded enhanced corrosion resistance to a high pressure and high temperature steam environment by an integral surface region of β-quenched zirconium formed in situ by laser beam scanning and afforded good mechanical and structural properties by a bulk region whose metallurgical structure is selected to optimize these mechanical properties. (author)

  17. Mechanocaloric effects in shape memory alloys.

    Science.gov (United States)

    Mañosa, Lluís; Planes, Antoni

    2016-08-13

    Shape memory alloys (SMA) are a class of ferroic materials which undergo a structural (martensitic) transition where the associated ferroic property is a lattice distortion (strain). The sensitiveness of the transition to the conjugated external field (stress), together with the latent heat of the transition, gives rise to giant mechanocaloric effects. In non-magnetic SMA, the lattice distortion is mostly described by a pure shear and the martensitic transition in this family of alloys is strongly affected by uniaxial stress, whereas it is basically insensitive to hydrostatic pressure. As a result, non-magnetic alloys exhibit giant elastocaloric effects but negligible barocaloric effects. By contrast, in a number of magnetic SMA, the lattice distortion at the martensitic transition involves a volume change in addition to the shear strain. Those alloys are affected by both uniaxial stress and hydrostatic pressure and they exhibit giant elastocaloric and barocaloric effects. The paper aims at providing a critical survey of available experimental data on elastocaloric and barocaloric effects in magnetic and non-magnetic SMA.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'. PMID:27402931

  18. High-strength iron aluminide alloys

    Energy Technology Data Exchange (ETDEWEB)

    McKamey, C.G.; Marrero-Santos, Y.; Maziasz, P.J.

    1995-06-01

    Past studies have shown that binary Fe{sub 3}Al possesses low creep-rupture strength compared to many other alloys, with creep-rupture lives of less than 5 h being reported for tests conducted at 593{degrees}C and 207 MPa. The combination of poor creep resistance and low room-temperature tensile density due to a susceptibility to environmentally-induced dynamic hydrogen embrittlement has limited use of these alloys for structural applications, despite their excellent corrosion properties. Improvements in room temperature tensile ductility have been realized mainly through alloying effects, changes in thermomechanical processing to control microstructure, and by control of the specimen`s surface condition. Ductilities of 10-20% and tensile yield strengths as high as 500 MPa have been reported. In terms of creep-rupture strength, small additions of Mo, Nb, and Zr have produced significant improvements, but at the expense of weldability and room-temperature tensile ductility. Recently an alloy containing these additions, designated FA-180, was shown to exhibit a creep-rupture life of over 2000 h after a heat treatment of 1 h at 1150{degrees}C. This study presents the results of creep-rupture tests at various test temperatures and stresses and discusses the results as part of our effort to understand the strengthening mechanisms involved with heat treatment at 1150{degrees}C.

  19. Shape-Memory-Alloy Release Mechanism

    Science.gov (United States)

    Mckinnis, Darin

    1993-01-01

    Release-nut mechanism activated by electric current applied to shape-memory alloy. Separates attached objects quickly by remote control. Does not create hazard or cause damage. Shape-memory release-nut mechanism unaffected by moisture or vacuum. Requires sustained current lasting 5 seconds or longer, and insensitive to electromagnetic interference. Mechanism can be reused.

  20. Working hardening modelization in zirconium alloys

    International Nuclear Information System (INIS)

    Working hardening effects on mechanical properties and crystallographic textures formation in Zr-based alloys are studied. The hardening mechanisms for different grain deformations and topological conditions of simple crystal yield are considered. Results obtained show that the differences in the cold rolling textures (L and T textures) can be related with hardening microstructural parameters. (author)

  1. Modeling and analyzing architectural change with Alloy

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Ingstrup, Mads

    2010-01-01

    to the uptake of reconfiguration techniques in industry. Using the Alloy language and associated tool, we propose a practical way to formally model and analyze runtime architectural change expressed as architectural scripts. Our evaluation shows the performance to be acceptable; our experience that...... the modelling language is convenient and expressive, and that our model accurately repesents the implementation it is used to reason about....

  2. Diffusion welding of commercial titanium alloys

    International Nuclear Information System (INIS)

    The weldability is studied of several industrial titanium alloys variously combined one to another in vacuum diffusion welding. Experimental results have been analyzed with reference to a model of electron localization. It is shown that the weldability is best in pairs, in which the electron exchange is conducive to electron localization, whereas the optimum temperatures of welding are those which enhance electron localization

  3. Ordering in binary transition metal alloys

    Energy Technology Data Exchange (ETDEWEB)

    Rusakov, G. [Institute for Metal Physics UB RAS, 18 Kovalevskoj St., 620990 Ekaterinburg (Russian Federation); Ural State Technical University - UPI, 19 Mira St., 620002 Ekaterinburg (Russian Federation); Son, L., E-mail: ldson@yandex.ru [Ural State Pedagogical University, 26 Cosmonavtov Ave, 620017 Ekaterinburg (Russian Federation); Efimova, E. [Institute for Metal Physics UB RAS, 18 Kovalevskoj St., 620990 Ekaterinburg (Russian Federation); Ural State Technical University - UPI, 19 Mira St., 620002 Ekaterinburg (Russian Federation); Dubinin, N. [Institute for Metallurgy UB RAS, 101 Amundsen St., 620016 Ekaterinburg (Russian Federation); Ural State Technical University - UPI, 19 Mira St., 620002 Ekaterinburg (Russian Federation)

    2012-03-20

    We present the phenomenological thermodynamic modeling of binary alloys which demonstrate solubility of the components at high temperatures, and form intermediate phase near equiatomic composition at lower ones (the so-called sigma-phase). Besides, the regular solution miscibility gap takes place also. The nonequilibrium thermodynamic potential is written out as a sum of the free energy of regular solution and polynomial term of scalar order parameter {phi}, which describes the {sigma}-phase ordering. There are four parameters in the model: the energy of regular solution mixing, the energy of {sigma}-phase formation at zero temperature, and the widths of temperature and concentration intervals of {sigma}-phase existence in the alloy with frozen-in random distribution of components. Up to now, both phase transitions which take place in a number of transition metals binary alloys (the {sigma}-phase formation and miscibility in the regular solution) have been treated separately. In present work, the standard technique of phase diagram calculation allows us to analyze all possible phase diagrams which may arise in the alloy.

  4. Nickel-titanium alloys: a systematic review

    Directory of Open Access Journals (Sweden)

    Marcelo do Amaral Ferreira

    2012-06-01

    Full Text Available OBJECTIVE: A systematic review on nickel-titanium wires was performed. The strategy was focused on Entrez-PubMed-OLDMEDLINE, Scopus and BioMed Central from 1963 to 2008. METHODS: Papers in English and French describing the behavior of these wires and laboratorial methods to identify crystalline transformation were considered. A total of 29 papers were selected. RESULTS: Nickel-titanium wires show exceptional features in terms of elasticity and shape memory effects. However, clinical applications request a deeper knowledge of these properties in order to allow the professional to use them in a rational manner. In addition, the necessary information regarding each alloy often does not correspond to the information given by the manufacturer. Many alloys called "superelastic" do not present this effect; they just behave as less stiff alloys, with a larger springback if compared to the stainless steel wires. CONCLUSIONS: Laboratory tests are the only means to observe the real behavior of these materials, including temperature transition range (TTR and applied tensions. However, it is also possible to determine in which TTR these alloys change the crystalline structure.

  5. Chemical bond approach to metals and alloys

    International Nuclear Information System (INIS)

    The BCS theory of superconductivity was extended to the transition elements and their alloys by a chemical bond approach based on the electronic configurations of the Engel-- Brewer theory of alloys. The net attractive potential between electrons in Cooper pairs, V/sub BCS/, for the late transition series elements and alloys is shown to arise mainly from a generalized electron--electron interaction related to bonding of electrons on the d level alone, the phonon-induced attraction being nearly zero. A mechanism is proposed in which a scattering of superconducting d electrons into nonsuperconducting s and p states is responsible for a predictable reduction in V/sub BCS/. The electron-per-atom ratio and a new chemical parameter, the average atomic radius for coordination twelve, were applied successfully to the prediction of the maximum energy product of multiphase commercial permanent magnets. The correlations developed for the maximum energy product with these two parameters can be applied to optimize the compositions of existing permanent magnets or suggest hypothetical alloy mixtures of possibly better magnetic properties. Heats of reaction of the

  6. Localized Corrosion of Alloy 22 -Fabrication Effects-

    Energy Technology Data Exchange (ETDEWEB)

    Rebak, R B

    2005-11-05

    This report deals with the impact of fabrication processes on the localized corrosion behavior of Alloy 22 (N06022). The four fabrication processes that were analyzed are: (1) Surface stress mitigation of final closure weld, (2) Manufacturing of the mockup container, (3) Black annealing of the container and (4) Use of different heats of Alloy 22 for container fabrication. Immersion and Electrochemical tests performed in the laboratory are generally aggressive and do not represent actual repository environments in Yucca Mountain. For example, to determine the intergranular attack in the heat affected zone of a weldment, tests are conducted in boiling acidic and oxidizing solutions according to ASTM standards. These solutions are used to compare the behavior of differently treated metallic coupons. Similarly for electrochemical tests many times pure sodium chloride or calcium chloride solutions are used. Pure chloride solutions are not representative of the repository environment. (1) Surface Stress Mitigation: When metallic plates are welded, for example using the Gas Tungsten Arc Welding (GTAW) method, residual tensile stresses may develop in the vicinity of the weld seam. Processes such as Low Plasticity Burnishing (LPB) and Laser Shock Peening (LSP) could be applied locally to eliminate the residual stresses produced by welding. In this study, Alloy 22 plates were welded and then the above-mentioned surface treatments were applied to eliminate the residual tensile stresses. The aim of the current study was to comparatively test the corrosion behavior of as-welded (ASW) plates with the corrosion behavior of plates with stress mitigated surfaces. Immersion and electrochemical tests were performed. Results from both immersion and electrochemical corrosion tests show that the corrosion resistance of the mitigated plates was not affected by the surface treatments applied. (2) Behavior of Specimens from a Mockup container: Alloy 22 has been extensively tested for

  7. In vivo effects of dental casting alloys

    Czech Academy of Sciences Publication Activity Database

    Venclíková, Z.; Benada, Oldřich; Bártová, J.; Joska, L.; Mrklas, L.; Procházková, J.; Stejskal, V.D.M.; Podzimek, Š.

    2006-01-01

    Roč. 27, č. 1 (2006), s. 25-32. ISSN 0172-780X R&D Projects: GA MZd NK7437 Institutional research plan: CEZ:AV0Z50200510 Keywords : dental alloys * metals * gingiva Subject RIV: EE - Microbiology, Virology Impact factor: 0.924, year: 2006

  8. Aluminium alloys containing iron and nickel

    International Nuclear Information System (INIS)

    The first part of this report addresses mechanism, kinetics and structure factors of aluminium alloys containing iron and nickel in water and high temperature steam. The studied alloys contain from 0.3 to 0.7 per cent of iron, and 0.2 to 1.0 per cent of nickel. Corrosion resistance and corrosion structure have been studied. The experimental installation, process and samples are presented. Corrosion structures in water at 350 C are identified and discussed (structure of corrosion products, structure of metal-oxide interface), and then in steam at different temperatures (350-395 C). Corrosion kinetics is experimentally studied (weight variation in time) in water at 350 C and in steam at different temperatures. Reactions occurring at over-heated steam (more than 400 C) are studied, and the case of welded alloys is also addressed. The second part addresses the metallurgical mechanism and processes influencing aluminium alloy resistance to corrosion by high temperature water as it appeared that separated phases protect the solid solution through a neighbourhood action. In order to avoid deep local corrosions, it seems necessary to multiply protective phases in an as uniform as possible way. Some processes enabling this result are described. They belong to conventional metallurgy or to powder metallurgy (with sintering and extrusion)

  9. Synthesis of ternary nitrides by mechanochemical alloying

    DEFF Research Database (Denmark)

    Jacobsen, C.J.H.; Zhu, J.J.; Lindelov, H.; Jiang, Jianzhong

    2002-01-01

    nitrides by mechanochemical alloying of a binary transition metal nitride (MxN) with an elemental transition metal. In this way, we have been able to prepare Fe3Mo3N and Co3Mo3N by ball-milling of Mo2N with Fe and Co, respectively. The transformation sequence from the starting materials ( the binary...

  10. Structure analysis of Al cast alloy

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2008-03-01

    Full Text Available Purpose: The developed design methodologies both the material and technological ones will make it possible to improve shortly the quality of materials from the light alloys in the technological process, and the automatic process flow correction will make the production cost reduction possible, and - first of all - to reduce the amount of the waste products.Design/methodology/approach: Castings were analysed in the paper of car engine blocks and heads from the Al-Si-Cu alloys of the AC-AlSi7Cu3Mg type fabricated with the “Cosworth” technological process. In this work the AC-AlSi7Cu3Mg alloy structure was investigated, of this alloy samples were cut of for structure analysis of the cylinder part as well of crankshaft of a fuel engine. The investigation show a difference in the (phase structure morphology as a result of cast cooling rate.Findings: On the quality of casting has influence the walls thickness of car engine elements’.Practical implications: In the metal casting industry, an improvement of component quality depends mainly on better control over the production parameters.Originality/value: The value of the applied methodology was to correct identify the casting effects that occurred during the casting process.

  11. Spectroscopic investigation of four different types of dental alloys

    International Nuclear Information System (INIS)

    Complete text of publication follows. The aim of this study was to investigate the influence of the pure metal components of the four different casting alloys on the corrosion behaviors of these alloys tested. Potentiodynamic polarization tests were carried out on four different types of casting alloys and their pure metals at 37 deg C in an artificial saliva solution. The ions released from the alloys into the solutions during the polarization test were also determined quantitatively using inductively coupled plasma-mass spectrometry (ICP-MS). When the total ions released into the saliva solution was examined, it was found that Ni-Cr (200.2 gcm-2) and Co-Cr (233.1 gcm-2) leaked more than the others. The total ion concentration dissolving in palladium based was 9.567 gcm-2 and 6.506 gcm-2 at gold based alloys. As a result of this study it can be concluded that Ni-Cr and Co-Cr alloys had a more homogenous structure than palladium based and gold based alloys in terms of the pitting potentials of the casting alloys and those of the pure metals composing the alloys. The total ion concentration released from palladium based and gold based was less than from Ni-Cr and Co-Cr alloys. This may be because palladium based and gold based alloys contained noble metals. It was also found that the noble metals in the palladium based and gold based samples decreased the current density in the anodic branch of the potentiodynamic polarization curves. In other words, noble metals contributed positively to dental materials. It can be said that corrosion resistance of the casting alloys can be affected by the pure metals they are composed of. Au and Pd based noble alloys dissolved less than Ni-Cr and Co-Cr based alloys.

  12. Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy for the improvement of bioactivity

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Y. [State Key Laboratory of Material Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, Wuhan University, Wuhan 430079 (China); Wang, A.H., E-mail: ahwang@mail.hust.edu.cn [State Key Laboratory of Material Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhang, Z.; Zheng, R.R. [State Key Laboratory of Material Processing and Die and Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Xia, H.B.; Wang, Y.N. [The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) and Key Laboratory of Oral Biomedicine Ministry of Education, Wuhan University, Wuhan 430079 (China)

    2014-06-01

    Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy is carried out by a pulsed Nd:YAG laser. The corresponding microstructure, phase structure, microhardness profiles, corrosion properties and bioactivity of the laser-alloyed coatings are investigated to optimize the atomic ratio of Ti–Si. The laser alloyed Ti–Si compound coatings are free of cracks, and primarily present block-like crystals, lath-like crystals and dendrite crystals. The phase structures of both laser-alloyed Ti + Si and 5Ti + 3Si coatings are mainly consisted of α-Ti and Ti{sub 5}Si{sub 3}, while the laser-alloyed Si coating is mainly consisted of TiSi{sub 2} and Ti{sub 5}Si{sub 3}. Microhardness test indicates that the laser-alloyed Si coating has the highest microhardness. Also, corrosion resistance measurement reveals that the corrosion resistance of the laser-alloyed Si coating is much better than that of the Ti–6Al–4V alloy. Evaluation of bioactivity shows that cell growth on the laser-alloyed Si coating with high volume fraction of Ti–Si compounds is faster than that of the Ti–6Al–4V alloy.

  13. Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy for the improvement of bioactivity

    International Nuclear Information System (INIS)

    Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy is carried out by a pulsed Nd:YAG laser. The corresponding microstructure, phase structure, microhardness profiles, corrosion properties and bioactivity of the laser-alloyed coatings are investigated to optimize the atomic ratio of Ti–Si. The laser alloyed Ti–Si compound coatings are free of cracks, and primarily present block-like crystals, lath-like crystals and dendrite crystals. The phase structures of both laser-alloyed Ti + Si and 5Ti + 3Si coatings are mainly consisted of α-Ti and Ti5Si3, while the laser-alloyed Si coating is mainly consisted of TiSi2 and Ti5Si3. Microhardness test indicates that the laser-alloyed Si coating has the highest microhardness. Also, corrosion resistance measurement reveals that the corrosion resistance of the laser-alloyed Si coating is much better than that of the Ti–6Al–4V alloy. Evaluation of bioactivity shows that cell growth on the laser-alloyed Si coating with high volume fraction of Ti–Si compounds is faster than that of the Ti–6Al–4V alloy.

  14. Effect of Al-3Nb-1B Master Alloy on the Grain Refinement of AZ91D Magnesium Alloy

    Science.gov (United States)

    Zhang, Lei; Zhou, Wei; Hu, Penghe; Zhou, Quan

    2016-06-01

    An Al-3Nb-1B master alloy has been prepared using a melt reaction method. The microstructure of the master alloy and its refinement performance on AZ91D magnesium alloy were investigated. Experimental results showed that the Al-3Nb-1B master alloy was mainly composed of α-Al and NbB2 phases. With the increase of the addition amount of Al-3Nb-1B master alloy, the primary α-Mg grains of AZ91D magnesium alloy were further refined. Upon adding 0.5 wt pct Al-3Nb-1B master alloy, the average grain size of the primary α-Mg decreased from 240 to 52 μm. The present results indicated that NbB2 can act as effective heterogeneous nucleus of the primary α-Mg, which accounted for the good grain refining performance on AZ91D magnesium alloy. Compared with the unrefined alloy, the yield strength, ultimate tensile strength, and elongation of AZ91D magnesium alloy refined by 0.5 wt pct Al-3Nb-1B master alloy were increased by 18.4, 15.7, and 27.3 pct, respectively due to the grain refinement effect.

  15. The Passive Film on Alloy 22

    Energy Technology Data Exchange (ETDEWEB)

    Orme, C A

    2005-09-09

    This report describes oxide (passive film) formation on Alloy 22 surfaces when aged in air (25-750 C) and in solutions (90-110 C) over times ranging from days to 5 years. Most zero-valent metals (and their alloys) are thermodynamically unstable on the earth's surface and in its upper crust. Most will therefore convert to oxides when exposed to a surficial or underground environment. Despite the presence of thermodynamic driving forces, metals and their alloys may persist over lengthy timescales, even under normal atmospheric oxidizing conditions. One reason for this is that as metal is converted to metal oxide, the oxide forms a film on the surface that limits diffusion of chemical components between the environment and the metal. The formation of surface oxide is integral to understanding corrosion rates and processes for many of the more ''resistant'' metals and alloys. This report describes the correlation between oxide composition and oxide stability for Alloy 22 under a range of relevant repository environments. In the case in which the oxide itself is thermodynamically stable, the growth of the oxide film is a self-limiting process (i.e., as the film thickens, the diffusion across it slows, and the metal oxidizes at an ever-diminishing rate). In the case where the oxide is not thermodynamically stable, it dissolves at the oxide--solution interface as the metal oxidizes at the metal--oxide interface. The system achieves a steady state with a particular oxide thickness when the oxide dissolution and the metal oxidation rates are balanced. Once sufficient metal has transferred to solution, the solution may become saturated with respect to the oxide, which is then thermodynamically stable. The driving force for dissolution at the oxide--solution interface then ceases, and the first case is obtained. In the case of a complex alloy such as Alloy 22 (Haynes International 1997), the development and behavior of the oxide layer is complicated

  16. Design of experiment (DOE) study of biodegradable magnesium alloy synthesized by mechanical alloying using fractional factorial design

    Science.gov (United States)

    Salleh, Emee Marina; Ramakrishnan, Sivakumar; Hussain, Zuhailawati

    2014-06-01

    The biodegradable nature of magnesium (Mg) makes it a most highlighted and attractive to be used as implant materials. However, rapid corrosion rate of Mg alloys especially in electrolytic aqueous environment limits its performance. In this study, Mg alloy was mechanically milled by incorporating manganese (Mn) as alloying element. An attempt was made to study both effect of mechanical alloying and subsequent consolidation processes on the bulk properties of Mg-Mn alloys. 2k-2 factorial design was employed to determine the significant factors in producing Mg alloy which has properties closes to that of human bones. The design considered six factors (i.e. milling time, milling speed, weight percentage of Mn, compaction pressure, sintering temperature and sintering time). Density and hardness were chosen as the responses for assessing the most significant parameters that affected the bulk properties of Mg-Mn alloys. The experimental variables were evaluated using ANOVA and regression model. The main parameter investigated was compaction pressure.

  17. Thermal coatings for titanium-aluminum alloys

    Science.gov (United States)

    Cunnington, George R.; Clark, Ronald K.; Robinson, John C.

    1993-01-01

    Titanium aluminides and titanium alloys are candidate materials for use in hot structure and heat-shield components of hypersonic vehicles because of their good strength-to-weight characteristics at elevated temperature. However, in order to utilize their maximum temperature capability, they must be coated to resist oxidation and to have a high total remittance. Also, surface catalysis for recombination of dissociated species in the aerodynamic boundary layer must be minimized. Very thin chemical vapor deposition (CVD) coatings are attractive candidates for this application because of durability and very light weight. To demonstrate this concept, coatings of boron-silicon and aluminum-boron-silicon compositions were applied to the titanium-aluminides alpha2 (Ti-14Al-21Nb), super-alpha2 (Ti-14Al-23-Nb-2V), and gamma (Ti-33Al-6Nb-1Ta) and to the titanium alloy beta-21S (Ti-15Mo-3Al-3Nb-0.2Si). Coated specimens of each alloy were subjected to a set of simulated hypersonic vehicle environmental tests to determine their properties of oxidation resistance, surface catalysis, radiative emittance, and thermal shock resistance. Surface catalysis results should be viewed as relative performance only of the several coating-alloy combinations tested under the specific environmental conditions of the LaRC Hypersonic Materials Environmental Test System (HYMETS) arc-plasma-heated hypersonic wind tunnel. Tests were also conducted to evaluate the hydrogen transport properties of the coatings and any effects of the coating processing itself on fatigue life of the base alloys. Results are presented for three types of coatings, which are as follows: (1) a single layer boron silicon coating, (2) a single layer aluminum-boron-silicon coating, and (3) a multilayer coating consisting of an aluminum-boron-silicon sublayer with a boron-silicon outer layer.

  18. Fast LIBS Identification of Aluminum Alloys

    Directory of Open Access Journals (Sweden)

    Tawfik W.

    2007-04-01

    Full Text Available Laser-induced breakdown spectroscopy (LIBS has been applied to analysis aluminum alloy targets. The plasma is generated by focusing a 300 mJ pulsed Nd: YAG laser on the target in air at atmospheric pressure. Such plasma emission spectrum was collected using a one-meter length wide band fused-silica optical fiber connected to a portable Echelle spectrometer with intensified CCD camera. Spectroscopic analysis of plasma evolution of laser produced plasmas has been characterized in terms of their spectra, electron density and electron temperature assuming the LTE and optically thin plasma conditions. The LIBS spectrum was optimized for high S/N ratio especially for trace elements. The electron temperature and density were determined using the emission intensity and stark broadening, respectively, of selected aluminum spectral lines. The values of these parameters were found to change with the aluminum alloy matrix, i.e. they could be used as a fingerprint character to distinguish between different aluminum alloy matrices using only one major element (aluminum without needing to analysis the rest of elements in the matrix. Moreover, It was found that the values of T(e and N(e decrease with increasing the trace elements concentrations in the aluminum alloy samples. The obtained results indicate that it is possible to improve the exploitation of LIBS in the remote on-line industrial monitoring application, by following up only the values of T(e and N(e for the aluminum in aluminum alloys using an optical fiber probe.

  19. Computational Materials Program for Alloy Design

    Science.gov (United States)

    Bozzolo, Guillermo

    2005-01-01

    The research program sponsored by this grant, "Computational Materials Program for Alloy Design", covers a period of time of enormous change in the emerging field of computational materials science. The computational materials program started with the development of the BFS method for alloys, a quantum approximate method for atomistic analysis of alloys specifically tailored to effectively deal with the current challenges in the area of atomistic modeling and to support modern experimental programs. During the grant period, the program benefited from steady growth which, as detailed below, far exceeds its original set of goals and objectives. Not surprisingly, by the end of this grant, the methodology and the computational materials program became an established force in the materials communitiy, with substantial impact in several areas. Major achievements during the duration of the grant include the completion of a Level 1 Milestone for the HITEMP program at NASA Glenn, consisting of the planning, development and organization of an international conference held at the Ohio Aerospace Institute in August of 2002, finalizing a period of rapid insertion of the methodology in the research community worlwide. The conference, attended by citizens of 17 countries representing various fields of the research community, resulted in a special issue of the leading journal in the area of applied surface science. Another element of the Level 1 Milestone was the presentation of the first version of the Alloy Design Workbench software package, currently known as "adwTools". This software package constitutes the first PC-based piece of software for atomistic simulations for both solid alloys and surfaces in the market.Dissemination of results and insertion in the materials community worldwide was a primary focus during this period. As a result, the P.I. was responsible for presenting 37 contributed talks, 19 invited talks, and publishing 71 articles in peer-reviewed journals, as

  20. Size Effect on Magnesium Alloy Castings

    Science.gov (United States)

    Li, Zhenming; Wang, Qigui; Luo, Alan A.; Zhang, Peng; Peng, Liming

    2016-06-01

    The effect of grain size on tensile and fatigue properties has been investigated in cast Mg alloys of Mg-2.98Nd-0.19Zn (1530 μm) and Mg-2.99Nd-0.2Zn-0.51Zr (41 μm). The difference between RB and push-pull fatigue testing was also evaluated in both alloys. The NZ30K05-T6 alloy shows much better tensile strengths (increased by 246 pct in YS and 159 pct in UTS) and fatigue strength (improved by ~80 pct) in comparison with NZ30-T6 alloy. RB fatigue testing results in higher fatigue strength compared with push-pull fatigue testing, mainly due to the stress/strain gradient in the RB specimen cross section. The material with coarse grains could be hardened more in the cyclic loading condition than in the monotonic loading condition, corresponding to the lower σ f and the higher σ f/ σ b or σ f/ σ 0.2 ratio compared to the materials with fine grains. The fatigue crack initiation sites and failure mechanism are mainly determined by the applied stress/strain amplitude. In LCF, fatigue failure mainly originates from the PSBs within the surface or subsurface grains of the samples. In HCF, cyclic deformation and damage irreversibly caused by environment-assisted cyclic slip is the crucial factor to influence the fatigue crack. The Coffin-Manson law and Basquin equation, and the developed MSF models and fatigue strength models can be used to predict fatigue lives and fatigue strengths of cast magnesium alloys.