Do places matter? A multi-level analysis of regional variations in health-related behaviour in Britain.

Science.gov (United States)

Duncan, C; Jones, K; Moon, G

1993-09-01

A number of commentators have argued that there is a distinctive geography of health-related behaviour. Behaviour has to be understood not only in terms of individual characteristics, but also in relation to local cultures. Places matter, and the context in which behaviour takes place is crucial for understanding and policy. Previous empirical research has been unable to operationalize these ideas and take simultaneous account of both individual compositional and aggregate contextual factors. The present paper addresses this shortcoming through a multi-level analysis of smoking and drinking behaviours recorded in a large-scale national survey. It suggests that place, expressed as regional differences, may be less important than previously implied.

Diagnostic inertia in dyslipidaemia: results of a preventative programme in Spain

Directory of Open Access Journals (Sweden)

Antonio Palazón-Bru

2015-07-01

Full Text Available Others have analysed the relationship between inadequate behaviour by healthcare professionals in the diagnosis of dyslipidaemia (diagnostic inertia and the history of cardiovascular risk factors. However, since no study has assessed cardiovascular risk scores as associated factors, we carried out a study to quantify diagnostic inertia in dyslipidaemia and to determine if cardiovascular risk scores are associated with this inertia. In the Valencian Community (Spain, a preventive programme (cardiovascular, gynaecologic and vaccination was started in 2003 inviting persons aged ≥40 years to undergo a health check-up at their health centre. This cross-sectional study examined persons with no known dyslipidaemia seen during the first six months of the programme (n = 16, 905 but whose total cholesterol (TC was ≥5.17 mmol/L. Diagnostic inertia was defined as lack of follow-up to confirm/discard the dyslipidaemia diagnosis. Other variables included in the analysis were gender, history of cardiovascular risk factors/cardiovascular disease, counselling (diet/exercise, body mass index (BMI, age, blood pressure, fasting blood glucose and lipids. TC was grouped as ≥/<6.20 mmol/L. In patients without cardiovascular disease and <75/≤65 years (n = 15, 778/13, 597, the REGICOR (REgistre GIroní del COr/SCORE (Systematic COronary Risk Evaluation cardiovascular risk functions were used to classify risk (high/low. Inertia was quantified and the adjusted odds ratios calculated from multivariate models. In the overall sample, the rate of diagnostic inertia was 52% (95% CI [51.2–52.7]; associated factors were TC ≥ 6.20 mmol/L, high or “not measured” BMI, hypertension, smoking and higher values of fasting blood glucose, systolic blood pressure and TC. In the REGICOR sample, the rate of diagnostic inertia was 51.9% (95% CI [51.1–52.7]; associated factors were REGICOR high and high or “not measured” BMI. In the SCORE sample the rate of diagnostic

Mars Thermal Inertia

Science.gov (United States)

2001-01-01

This image shows the global thermal inertia of the Martian surface as measured by the Thermal Emission Spectrometer (TES) instrument on the Mars Global Surveyor. The data were acquired during the first 5000 orbits of the MGS mapping mission. The pattern of inertia variations observed by TES agrees well with the thermal inertia maps made by the Viking Infrared Thermal Mapper experiment, but the TES data shown here are at significantly higher spatial resolution (15 km versus 60 km).The TES instrument was built by Santa Barbara Remote Sensing and is operated by Philip R. Christensen, of Arizona State University, Tempe, AZ.

A constitutive model for the compressive response of metallic closed-cell foams including micro-inertia effects

Directory of Open Access Journals (Sweden)

Barthélémy Romain

2015-01-01

Full Text Available Metallic foams have known a keen interest in the last decades. Their ability to undergo very large deformations while transmitting low stress levels make them capable of performing functions of protective layers against intense loadings and of energy absorbers, for instance. The behaviour of metal foams varies considerably between quasi-static and dynamic regimes. Those differences can be linked to the strain-rate sensitivity of the skeleton material and to micro-inertial effects (induced by the crushing of the foam cells. In the present work, a micromechanical model has been developed to take into account micro-inertia effects on the macroscopic behaviour of closed-cell foams under dynamic loading conditions. The proposed modelling is based on the dynamic homogenisation procedure introduced by Molinari and Mercier (J. Mech. Phys. Solids 49 (2001 1497–1516. Within this framework, the macrostress is the sum of two terms. The first one is a static stress, that can be described with any existing model of metal foam. The second contribution is a dynamic stress related to micro-inertia effects. Considering an initially spherical shell as a Representative Volume Element (RVE of the foam material, a closed-form expression of the dynamic stress was obtained. The proposed modelling was applied to shock propagation in aluminium foams (it should however be noted that the present theory is not restricted to uniaxial deformation but can be applied to arbitrary loadings. From experimental data of the literature, it is observed that incorporating micro-inertia effects allows one to achieve a better description of the foam shock response. This indicates that micro-inertia may have a significant influence on the dynamic behaviour of metallic foams.

Phylogenetic inertia and Darwin's higher law.

Science.gov (United States)

Shanahan, Timothy

2011-03-01

The concept of 'phylogenetic inertia' is routinely deployed in evolutionary biology as an alternative to natural selection for explaining the persistence of characteristics that appear sub-optimal from an adaptationist perspective. However, in many of these contexts the precise meaning of 'phylogenetic inertia' and its relationship to selection are far from clear. After tracing the history of the concept of 'inertia' in evolutionary biology, I argue that treating phylogenetic inertia and natural selection as alternative explanations is mistaken because phylogenetic inertia is, from a Darwinian point of view, simply an expected effect of selection. Although Darwin did not discuss 'phylogenetic inertia,' he did assert the explanatory priority of selection over descent. An analysis of 'phylogenetic inertia' provides a perspective from which to assess Darwin's view. Copyright © 2010 Elsevier Ltd. All rights reserved.

A new validation technique for estimations of body segment inertia tensors: Principal axes of inertia do matter.

Science.gov (United States)

Rossi, Marcel M; Alderson, Jacqueline; El-Sallam, Amar; Dowling, James; Reinbolt, Jeffrey; Donnelly, Cyril J

2016-12-08

The aims of this study were to: (i) establish a new criterion method to validate inertia tensor estimates by setting the experimental angular velocity data of an airborne objects as ground truth against simulations run with the estimated tensors, and (ii) test the sensitivity of the simulations to changes in the inertia tensor components. A rigid steel cylinder was covered with reflective kinematic markers and projected through a calibrated motion capture volume. Simulations of the airborne motion were run with two models, using inertia tensor estimated with geometric formula or the compound pendulum technique. The deviation angles between experimental (ground truth) and simulated angular velocity vectors and the root mean squared deviation angle were computed for every simulation. Monte Carlo analyses were performed to assess the sensitivity of simulations to changes in magnitude of principal moments of inertia within ±10% and to changes in orientation of principal axes of inertia within ±10° (of the geometric-based inertia tensor). Root mean squared deviation angles ranged between 2.9° and 4.3° for the inertia tensor estimated geometrically, and between 11.7° and 15.2° for the compound pendulum values. Errors up to 10% in magnitude of principal moments of inertia yielded root mean squared deviation angles ranging between 3.2° and 6.6°, and between 5.5° and 7.9° when lumped with errors of 10° in principal axes of inertia orientation. The proposed technique can effectively validate inertia tensors from novel estimation methods of body segment inertial parameter. Principal axes of inertia orientation should not be neglected when modelling human/animal mechanics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Thermal Inertia of Rocks and Rock Populations

Science.gov (United States)

Golombek, M. P.; Jakosky, B. M.; Mellon, M. T.

2001-01-01

The effective thermal inertia of rock populations on Mars and Earth is derived from a model of effective inertia versus rock diameter. Results allow a parameterization of the effective rock inertia versus rock abundance and bulk and fine component inertia. Additional information is contained in the original extended abstract.

Development and Validation of the Sleep Inertia Questionnaire (SIQ) and Assessment of Sleep Inertia in Analogue and Clinical Depression.

Science.gov (United States)

Kanady, Jennifer C; Harvey, Allison G

2015-10-01

Sleep inertia is the transitional state from sleep to wake. Research on sleep inertia is important in depression because many people with depression report having difficulty getting out of bed, which contributes to impairment and can impede the implementation of interventions. The first aim was to develop and validate the first self-report measure of sleep inertia, the Sleep Inertia Questionnaire (SIQ). The second aim was to compare reports of sleep inertia across three groups: (1) No-to-Mild-Depression, (2) Analogue-Depression, and (3) Syndromal-Depression. The SIQ demonstrates strong psychometric properties; it has good to excellent internal consistency, strong construct validity, and SIQ severity is associated with less prior sleep duration. Sleep inertia is more severe in the Analogue-Depression and Syndromal-Depression groups compared to the No-to-Mild-Depression group. In conclusion, the SIQ is a reliable measure of sleep inertia and has potential for improving the assessment of sleep inertia in clinical and research settings.

Flapping inertia for selected rotor blades

Science.gov (United States)

Berry, John D.; May, Matthew J.

1991-01-01

Aerodynamics of helicopter rotor systems cannot be investigated without consideration for the dynamics of the rotor. One of the principal properties of the rotor which affects the rotor dynamics is the inertia of the rotor blade about its root attachment. Previous aerodynamic investigation have been performed on rotor blades with a variety of planforms to determine the performance differences due to blade planform. The blades tested for this investigation have been tested on the U.S. Army 2 meter rotor test system (2MRTS) in the NASA Langley 14 by 22 foot subsonic tunnel for hover performance. This investigation was intended to provide fundamental information on the flapping inertia of five rotor blades with differing planforms. The inertia of the bare cuff and the cuff with a blade extension were also measured for comparison with the inertia of the blades. Inertia was determined using a swing testing technique, using the period of oscillation to determine the effective flapping inertia. The effect of damping in the swing test was measured and described. A comparison of the flapping inertials for rectangular and tapered planform blades of approximately the same mass showed the tapered blades to have a lower inertia, as expected.

Primary uterine inertia in four labrador bitches.

Science.gov (United States)

Davidson, Autumn P

2011-01-01

Uterine inertia is a common cause of dystocia in the bitch and is designated as primary (i.e., uterine contractions fail to ever be initiated) or secondary (i.e., uterine contractions cease after a period of time but before labor is completed). The etiology of primary uterine inertia is not well understood. The accurate diagnosis of primary uterine inertia requires the use of tocodynamometry (uterine monitoring). Primary uterine inertia has been postulated to result from a failure of luteolysis resulting in persistently elevated progesterone concentrations. In this study, primary uterine inertia was diagnosed in a series of four bitches in which luteolysis was documented suggesting some other etiopathogenesis for primary uterine inertia.

Effects of Inertia on Evolutionary Prisoner's Dilemma Game

Science.gov (United States)

Du, Wen-Bo; Cao, Xian-Bin; Liu, Run-Ran; Wang, Zhen

2012-09-01

Considering the inertia of individuals in real life, we propose a modified Fermi updating rule, where the inertia of players is introduced into evolutionary prisoner's dilemma game (PDG) on square lattices. We mainly focus on how the inertia affects the cooperative behavior of the system. Interestingly, we find that the cooperation level has a nonmonotonic dependence on the inertia: with small inertia, cooperators will soon be invaded by defectors; with large inertia, players are unwilling to change their strategies and the cooperation level remains the same as the initial state; while a moderate inertia can induce the highest cooperation level. Moreover, effects of environmental noise and individual inertia are studied. Our work may be helpful in understanding the emergence and persistence of cooperation in nature and society.

Therapeutic Inertia and Treatment Intensification.

Science.gov (United States)

Josiah Willock, Robina; Miller, Joseph B; Mohyi, Michelle; Abuzaanona, Ahmed; Muminovic, Meri; Levy, Phillip D

2018-01-29

This review aims to emphasize how therapeutic inertia, the failure of clinicians to intensify treatment when blood pressure rises or remains above therapeutic goals, contributes to suboptimal blood pressure control in hypertensive populations. Studies reveal that the therapeutic inertia is quite common and contributes to suboptimal blood pressure control. Quality improvement programs and standardized approaches to support antihypertensive treatment intensification are ways to combat therapeutic inertia. Furthermore, programs that utilize non-physician medical professionals such as pharmacists and nurses demonstrate promise in mitigating the effects of this important problem. Therapeutic inertia impedes antihypertensive management and requires a broad effort to reduce its effects. There is an ongoing need for renewed focus and research in this area to improve hypertension control.

Inertia in strategy switching transforms the strategy evolution.

Science.gov (United States)

Zhang, Yanling; Fu, Feng; Wu, Te; Xie, Guangming; Wang, Long

2011-12-01

A recent experimental study [Traulsen et al., Proc. Natl. Acad. Sci. 107, 2962 (2010)] shows that human strategy updating involves both direct payoff comparison and the cost of switching strategy, which is equivalent to inertia. However, it remains largely unclear how such a predisposed inertia affects 2 × 2 games in a well-mixed population of finite size. To address this issue, the "inertia bonus" (strategy switching cost) is added to the learner payoff in the Fermi process. We find how inertia quantitatively shapes the stationary distribution and that stochastic stability under inertia exhibits three regimes, with each covering seven regions in the plane spanned by two inertia parameters. We also obtain the extended "1/3" rule with inertia and the speed criterion with inertia; these two findings hold for a population above two. We illustrate the above results in the framework of the Prisoner's Dilemma game. As inertia varies, two intriguing stationary distributions emerge: the probability of coexistence state is maximized, or those of two full states are simultaneously peaked. Our results may provide useful insights into how the inertia of changing status quo acts on the strategy evolution and, in particular, the evolution of cooperation.

Effects of Inertia on Evolutionary Prisoner's Dilemma Game

International Nuclear Information System (INIS)

Du Wenbo; Cao Xianbin; Liu Runran; Wang Zhen

2012-01-01

Considering the inertia of individuals in real life, we propose a modified Fermi updating rule, where the inertia of players is introduced into evolutionary prisoner's dilemma game (PDG) on square lattices. We mainly focus on how the inertia affects the cooperative behavior of the system. Interestingly, we find that the cooperation level has a nonmonotonic dependence on the inertia: with small inertia, cooperators will soon be invaded by defectors; with large inertia, players are unwilling to change their strategies and the cooperation level remains the same as the initial state; while a moderate inertia can induce the highest cooperation level. Moreover, effects of environmental noise and individual inertia are studied. Our work may be helpful in understanding the emergence and persistence of cooperation in nature and society. (interdisciplinary physics and related areas of science and technology)

Delamination detection in reinforced concrete using thermal inertia

International Nuclear Information System (INIS)

Del Grande, N K; Durbin, P F.

1998-01-01

We investigated the feasibility of thermal inertia mapping for bridge deck inspections. Using pulsed thermal imaging, we heat-stimulated surrogate delaminations in reinforced concrete and asphalt-concrete slabs. Using a dual-band infrared camera system, we measured thermal inertia responses of Styrofoam implants under 5 cm of asphalt, 5 cm of concrete, and 10 cm of asphalt and concrete. We compared thermal maps from solar-heated concrete and asphalt-concrete slabs with thermal inertia maps from flash-heated concrete and asphalt-concrete slabs. Thermal inertia mapping is a tool for visualizing and quantifying subsurface defects. Physically, thermal inertia is a measure of the resistance of the bridge deck to temperature change. Experimentally, it is determined from the inverse slope of the surface temperature versus the inverse square root of time. Mathematically, thermal inertia is the square root of the product of thermal conductivity, density, and heat capacity. Thermal inertia mapping distinguishes delaminated decks which have below-average thermal inertias from normal or shaded decks. Key Words: Pulsed Thermal Imaging, Thermal Inertia, Detection Of Concrete Bridgedeck Delaminations

Bounds on the mass and the moment of inertia of nonrotating neutron stars

International Nuclear Information System (INIS)

Sabbadini, A.G.

1976-01-01

Bounds are placed on the mass and the moment of inertia of relativistic, spherical, perfect fluid neutron stars, under minimal assumptions on the equation of state of neutron star matter above nuclear densities. The assumptions are: the pressure p, the density rho, and the derivative dp/d rho are positive. The equation of state is assumed to be known below the density rho 0 = 5 x 10 14 g/cm 3 . The upper bound on the mass of a nonrotating neutron star, under these assumptions, is found to be 5 M/sub solar mass/. Upper and lower bounds on the moment of inertia are derived: for a spherical star of given mass and radius (without assuming a specific equation of state in any density region); for a spherical neutron star of arbitrary mass and radius; for a spherical neutron star of given mass. These bounds are optimum ones, in the sense that there always exists a configuration consistent with the assumptions, having a moment of inertia equal to the bound. Using these results for the moment of inertia, the correction to the upper bound on the mass due to slow rotation is discussed

Sensitivity of the moment of inertia of neutron stars to the equation of state of neutron-rich matter

International Nuclear Information System (INIS)

Fattoyev, F. J.; Piekarewicz, J.

2010-01-01

The sensitivity of the stellar moment of inertia to the neutron-star matter equation of state is examined using accurately calibrated relativistic mean-field models. We probe this sensitivity by tuning both the density dependence of the symmetry energy and the high-density component of the equation of state, properties that are at present poorly constrained by existing laboratory data. Particularly attractive is the study of the fraction of the moment of inertia contained in the solid crust. Analytic treatments of the crustal moment of inertia reveal a high sensitivity to the transition pressure at the core-crust interface. This may suggest the existence of a strong correlation between the density dependence of the symmetry energy and the crustal moment of inertia. However, no correlation was found. We conclude that constraining the density dependence of the symmetry energy - through, for example, the measurement of the neutron skin thickness in 208 Pb - will place no significant bound on either the transition pressure or the crustal moment of inertia.

Massive Submucosal Ganglia in Colonic Inertia.

Science.gov (United States)

Naemi, Kaveh; Stamos, Michael J; Wu, Mark Li-Cheng

2018-02-01

- Colonic inertia is a debilitating form of primary chronic constipation with unknown etiology and diagnostic criteria, often requiring pancolectomy. We have occasionally observed massively enlarged submucosal ganglia containing at least 20 perikarya, in addition to previously described giant ganglia with greater than 8 perikarya, in cases of colonic inertia. These massively enlarged ganglia have yet to be formally recognized. - To determine whether such "massive submucosal ganglia," defined as ganglia harboring at least 20 perikarya, characterize colonic inertia. - We retrospectively reviewed specimens from colectomies of patients with colonic inertia and compared the prevalence of massive submucosal ganglia occurring in this setting to the prevalence of massive submucosal ganglia occurring in a set of control specimens from patients lacking chronic constipation. - Seven of 8 specimens affected by colonic inertia harbored 1 to 4 massive ganglia, for a total of 11 massive ganglia. One specimen lacked massive ganglia but had limited sampling and nearly massive ganglia. Massive ganglia occupied both superficial and deep submucosal plexus. The patient with 4 massive ganglia also had 1 mitotically active giant ganglion. Only 1 massive ganglion occupied the entire set of 10 specimens from patients lacking chronic constipation. - We performed the first, albeit distinctly small, study of massive submucosal ganglia and showed that massive ganglia may be linked to colonic inertia. Further, larger studies are necessary to determine whether massive ganglia are pathogenetic or secondary phenomena, and whether massive ganglia or mitotically active ganglia distinguish colonic inertia from other types of chronic constipation.

Effects of the racket polar moment of inertia on dominant upper limb joint moments during tennis serve.

Science.gov (United States)

Rogowski, Isabelle; Creveaux, Thomas; Chèze, Laurence; Macé, Pierre; Dumas, Raphaël

2014-01-01

This study examined the effect of the polar moment of inertia of a tennis racket on upper limb loading in the serve. Eight amateur competition tennis players performed two sets of 10 serves using two rackets identical in mass, position of center of mass and moments of inertia other than the polar moment of inertia (0.00152 vs 0.00197 kg.m2). An eight-camera motion analysis system collected the 3D trajectories of 16 markers, located on the thorax, upper limbs and racket, from which shoulder, elbow and wrist net joint moments and powers were computed using inverse dynamics. During the cocking phase, increased racket polar moment of inertia was associated with significant increases in the peak shoulder extension and abduction moments, as well the peak elbow extension, valgus and supination moments. During the forward swing phase, peak wrist extension and radial deviation moments significantly increased with polar moment of inertia. During the follow-through phase, the peak shoulder adduction, elbow pronation and wrist external rotation moments displayed a significant inverse relationship with polar moment of inertia. During the forward swing, the magnitudes of negative joint power at the elbow and wrist were significantly larger when players served using the racket with a higher polar moment of inertia. Although a larger polar of inertia allows players to better tolerate off-center impacts, it also appears to place additional loads on the upper extremity when serving and may therefore increase injury risk in tennis players.

Gross shell structure of moments of inertia

International Nuclear Information System (INIS)

Deleplanque, M.A.; Frauendorf, S.; Pashkevich, V.V.; Chu, S.Y.; Unzhakova, A.

2002-01-01

Average yrast moments of inertia at high spins, where the pairing correlations are expected to be largely absent, were found to deviate from the rigid-body values. This indicates that shell effects contribute to the moment of inertia. We discuss the gross dependence of moments of inertia and shell energies on the neutron number in terms of the semiclassical periodic orbit theory. We show that the ground-state shell energies, nuclear deformations and deviations from rigid-body moments of inertia are all due to the same periodic orbits

Effects of the racket polar moment of inertia on dominant upper limb joint moments during tennis serve.

Directory of Open Access Journals (Sweden)

Isabelle Rogowski

Full Text Available This study examined the effect of the polar moment of inertia of a tennis racket on upper limb loading in the serve. Eight amateur competition tennis players performed two sets of 10 serves using two rackets identical in mass, position of center of mass and moments of inertia other than the polar moment of inertia (0.00152 vs 0.00197 kg.m2. An eight-camera motion analysis system collected the 3D trajectories of 16 markers, located on the thorax, upper limbs and racket, from which shoulder, elbow and wrist net joint moments and powers were computed using inverse dynamics. During the cocking phase, increased racket polar moment of inertia was associated with significant increases in the peak shoulder extension and abduction moments, as well the peak elbow extension, valgus and supination moments. During the forward swing phase, peak wrist extension and radial deviation moments significantly increased with polar moment of inertia. During the follow-through phase, the peak shoulder adduction, elbow pronation and wrist external rotation moments displayed a significant inverse relationship with polar moment of inertia. During the forward swing, the magnitudes of negative joint power at the elbow and wrist were significantly larger when players served using the racket with a higher polar moment of inertia. Although a larger polar of inertia allows players to better tolerate off-center impacts, it also appears to place additional loads on the upper extremity when serving and may therefore increase injury risk in tennis players.

D-dimensional moments of inertia

International Nuclear Information System (INIS)

Bender, C.M.; Mead, L.R.

1995-01-01

We calculate the moments of inertia of D-dimensional spheres and spherical shells, where D is a complex number. We also examine the moments of inertia of fractional-dimensional geometrical objects such as the Cantor set and the Sierpinski carpet and their D-dimensional analogs. copyright 1995 American Association of Physics Teachers

We are at risk, and so what? Place attachment, environmental risk perceptions and preventive coping behaviours

DEFF Research Database (Denmark)

De Dominicis, Stefano; Fornara, Ferdinando; Ganucci Cancellieri, Uberta

2015-01-01

Place attachment regulates people-environment transactions across various relevant environmental-psychological processes. However, there is no consensus about its role in the relationship between environmental risk perception and coping behaviours. Since place attachment is strongly related to pl...

Development of inertia-increased reactor internal pump

International Nuclear Information System (INIS)

Tanaka, Masaaki; Matsumura, Seiichi; Kikushima, Jun; Kawamura, Shinichi; Yamashita, Norimichi; Kurosaki, Toshikazu; Kondo, Takahisa

2000-01-01

The Reactor Internal Pump (RIP) was adopted for the Reactor Recirculation System (RRS) of Advanced Boiling Water Reactor (ABWR) plants, and ten RIPs are located at the bottom of the reactor pressure vessel. In order to simplify the power supply system for the RIPs, a new inertia-increased RIP was developed, which allows to eliminate the Motor-Generator (M-G) sets. The rotating inertia was increased approximately 2.5 times of current RIP inertia by addition of flywheel on its main shaft. A full scale proving test of the inertia-increased RIP under actual plant operating conditions using full scale test loop was performed to evaluate vibration characteristics and coast down characteristics. From the results of this proving test, the validity of the new inertia-increased RIP and its power supply system (without M-G sets) was confirmed. (author)

Identification of brain nuclei implicated in cocaine-primed reinstatement of conditioned place preference: a behaviour dissociable from sensitization.

Directory of Open Access Journals (Sweden)

Robyn Mary Brown

Full Text Available Relapse prevention represents the primary therapeutic challenge in the treatment of drug addiction. As with humans, drug-seeking behaviour can be precipitated in laboratory animals by exposure to a small dose of the drug (prime. The aim of this study was to identify brain nuclei implicated in the cocaine-primed reinstatement of a conditioned place preference (CPP. Thus, a group of mice were conditioned to cocaine, had this place preference extinguished and were then tested for primed reinstatement of the original place preference. There was no correlation between the extent of drug-seeking upon reinstatement and the extent of behavioural sensitization, the extent of original CPP or the extinction profile of mice, suggesting a dissociation of these components of addictive behaviour with a drug-primed reinstatement. Expression of the protein product of the neuronal activity marker c-fos was assessed in a number of brain regions of mice that exhibited reinstatement (R mice versus those which did not (NR mice. Reinstatement generally conferred greater Fos expression in cortical and limbic structures previously implicated in drug-seeking behaviour, though a number of regions not typically associated with drug-seeking were also activated. In addition, positive correlations were found between neural activation of a number of brain regions and reinstatement behaviour. The most significant result was the activation of the lateral habenula and its positive correlation with reinstatement behaviour. The findings of this study question the relationship between primed reinstatement of a previously extinguished place preference for cocaine and behavioural sensitization. They also implicate activation patterns of discrete brain nuclei as differentiators between reinstating and non-reinstating mice.

Identification of Brain Nuclei Implicated in Cocaine-Primed Reinstatement of Conditioned Place Preference: A Behaviour Dissociable from Sensitization

Science.gov (United States)

Brown, Robyn Mary; Short, Jennifer Lynn; Lawrence, Andrew John

2010-01-01

Relapse prevention represents the primary therapeutic challenge in the treatment of drug addiction. As with humans, drug-seeking behaviour can be precipitated in laboratory animals by exposure to a small dose of the drug (prime). The aim of this study was to identify brain nuclei implicated in the cocaine-primed reinstatement of a conditioned place preference (CPP). Thus, a group of mice were conditioned to cocaine, had this place preference extinguished and were then tested for primed reinstatement of the original place preference. There was no correlation between the extent of drug-seeking upon reinstatement and the extent of behavioural sensitization, the extent of original CPP or the extinction profile of mice, suggesting a dissociation of these components of addictive behaviour with a drug-primed reinstatement. Expression of the protein product of the neuronal activity marker c-fos was assessed in a number of brain regions of mice that exhibited reinstatement (R mice) versus those which did not (NR mice). Reinstatement generally conferred greater Fos expression in cortical and limbic structures previously implicated in drug-seeking behaviour, though a number of regions not typically associated with drug-seeking were also activated. In addition, positive correlations were found between neural activation of a number of brain regions and reinstatement behaviour. The most significant result was the activation of the lateral habenula and its positive correlation with reinstatement behaviour. The findings of this study question the relationship between primed reinstatement of a previously extinguished place preference for cocaine and behavioural sensitization. They also implicate activation patterns of discrete brain nuclei as differentiators between reinstating and non-reinstating mice. PMID:21209913

Clinical inertia, uncertainty and individualized guidelines.

Science.gov (United States)

Reach, G

2014-09-01

Doctors often do not follow the guidelines of good practice based on evidence-based medicine, and this "clinical inertia" may represent an impediment to efficient care. The aims of this article are as follows: 1) to demonstrate that this phenomenon is often the consequence of a discrepancy between the technical rationality of evidence-based medicine and the modes of reasoning of physicians practiced in "real-life", which is marked by uncertainty and risk; 2) to investigate in this context the meaning of the recent, somewhat paradoxical, concept of "individualized guidelines"; and 3) to revisit the real, essentially pedagogical, place of guidelines in medical practice. Copyright © 2014. Published by Elsevier Masson SAS.

Testing quantised inertia on emdrives with dielectrics

Science.gov (United States)

McCulloch, M. E.

2017-05-01

Truncated-cone-shaped cavities with microwaves resonating within them (emdrives) move slightly towards their narrow ends, in contradiction to standard physics. This effect has been predicted by a model called quantised inertia (MiHsC) which assumes that the inertia of the microwaves is caused by Unruh radiation, more of which is allowed at the wide end. Therefore, photons going towards the wide end gain inertia, and to conserve momentum the cavity must move towards its narrow end, as observed. A previous analysis with quantised inertia predicted a controversial photon acceleration, which is shown here to be unnecessary. The previous analysis also mispredicted the thrust in those emdrives with dielectrics. It is shown here that having a dielectric at one end of the cavity is equivalent to widening the cavity at that end, and when dielectrics are considered, then quantised inertia predicts these results as well as the others, except for Shawyer's first test where the thrust is predicted to be the right size but in the wrong direction. As a further test, quantised inertia predicts that an emdrive's thrust can be enhanced by using a dielectric at the wide end.

Therapeutic inertia in the outpatient management of dyslipidemia in patients with ischemic heart disease. The inertia study.

Science.gov (United States)

Lázaro, Pablo; Murga, Nekane; Aguilar, Dolores; Hernández-Presa, Miguel A

2010-12-01

Studies indicate that dyslipidemia is undertreated. Numerous systematic reviews have shown that, even when therapeutic targets set by clinical practice guidelines have not been met, treatment remains unchanged despite the availability of alternatives approaches. The result is increased morbidity and mortality. Our aims were to investigate this phenomenon, known as therapeutic inertia, in patients with dyslipidemia and ischemic heart disease, and to determine its possible causes. national, multicenter, observational study of data obtained from physicians by questionnaire and from the clinical records of patients with ischemic heart disease. Main variable: therapeutic inertia during a consultation, defined as treatment remaining the same despite a change being indicated (e.g. low-density lipoprotein cholesterol >100 mg/dl or >70 mg/dl in diabetics). Covariates: physician, patient and consultation characteristics. multivariate logistic regression analysis of factors associated with therapeutic inertia during a consultation. Overall, 43% of consultations involved therapeutic inertia, and an association with coronary risk factors, including diabetes, did not result in a change in treatment. Therapeutic inertia occurred more frequently when there was a long time between the diagnosis and treatment of dyslipidemia and that of ischemic heart disease. Undertreatment was particularly common in women despite a greater overall risk. The more experienced physicians treated younger patients more appropriately. Clinical practice was improved by educational sessions at conferences. Therapeutic inertia was common in patients with chronic ischemic heart disease and dyslipidemia, irrespective of overall cardiovascular risk. Factors associated with the patient, disease and physician had an influence.

Electrohydrodynamics of a viscous drop with inertia.

Science.gov (United States)

Nganguia, H; Young, Y-N; Layton, A T; Lai, M-C; Hu, W-F

2016-05-01

Most of the existing numerical and theoretical investigations on the electrohydrodynamics of a viscous drop have focused on the creeping Stokes flow regime, where nonlinear inertia effects are neglected. In this work we study the inertia effects on the electrodeformation of a viscous drop under a DC electric field using a novel second-order immersed interface method. The inertia effects are quantified by the Ohnesorge number Oh, and the electric field is characterized by an electric capillary number Ca_{E}. Below the critical Ca_{E}, small to moderate electric field strength gives rise to steady equilibrium drop shapes. We found that, at a fixed Ca_{E}, inertia effects induce larger deformation for an oblate drop than a prolate drop, consistent with previous results in the literature. Moreover, our simulations results indicate that inertia effects on the equilibrium drop deformation are dictated by the direction of normal electric stress on the drop interface: Larger drop deformation is found when the normal electric stress points outward, and smaller drop deformation is found otherwise. To our knowledge, such inertia effects on the equilibrium drop deformation has not been reported in the literature. Above the critical Ca_{E}, no steady equilibrium drop deformation can be found, and often the drop breaks up into a number of daughter droplets. In particular, our Navier-Stokes simulations show that, for the parameters we use, (1) daughter droplets are larger in the presence of inertia, (2) the drop deformation evolves more rapidly compared to creeping flow, and (3) complex distribution of electric stresses for drops with inertia effects. Our results suggest that normal electric pressure may be a useful tool in predicting drop pinch-off in oblate deformations.

Development of an Inertia-Increased ABWR Internal Pump

International Nuclear Information System (INIS)

Shirou Takahashi; Kousei Umemori; Kooji Shiina; Tetsuya Totani; Akihiro Sakashita; Norimichi Yamashita; Takahisa Kondo

2002-01-01

It is possible to simplify the reactor internal pump power supply system in the ABWR without affecting the core flow supply when a trip of all RIPs event occurs by eliminating the motor-generator sets and increasing the rotating inertia of the RIPs. This inertia increase due to an additional flywheel, which leads to a gain in weight and length, requires a larger diameter nozzle with a thicker sleeve. However, a thicker sleeve nozzle and a longer and heavier motor casing may change the RIP performance. In the present study, the inertia-increased RIP was verified through full-scale tests. The rotating inertia time constant for coast-down characteristics (behavior of the RIP speed in the event of power loss) for the inertia-increased RIP was doubled compared with the current RIP. The inertia-increased RIP with the thicker sleeve nozzle maintained good performance and its power supply system without motor-generator sets was judged appropriate for the ABWR. (authors)

A vacuum--generated inertia reaction force

International Nuclear Information System (INIS)

Rueda, Alfonso; Haisch, Bernard

2001-01-01

A clear and succinct covariant approach shows that, in principle, there must be a contribution to the inertia reaction force on an accelerated object by the surrounding vacuum electromagnetic field in which the object is embedded. No details of the vacuum to object electromagnetic interaction need to be specified other than the fact that the object is made of electromagnetically interacting particles. Some interesting consequences of this feature are discussed. This analysis strongly supports the concept that inertia is indeed an opposition of the vacuum fields to any attempt to change the uniform state of motion of material bodies. This also definitely shows that inertia should be viewed as extrinsic to mass and that causing agents and/or mechanisms responsible for the inertia reaction force are neither intrinsic to the notion of mass nor to the entities responsible for the existence of mass in elementary particles (as, e.g., the Higgs field). In other words the mechanism that produces the inertia-reaction-force requires an explicit explanation. This explicit explanation is that inertia is an opposition of the vacuum fields to the accelerated motion of any material entities, i.e., of entities that possess mass. It is briefly commented why the existence of a Higgs field responsible for the generation of mass in elementary particles does not contradict the view presented here. It is also briefly discussed why a strict version of Mach's Principle does really contradict this view, though a broad sense version of Mach's Principle may be in agreement

Frequency Stability Enhancement for Low Inertia Systems using Synthetic Inertia of Wind Power

DEFF Research Database (Denmark)

Nguyen, Ha Thi; Yang, Guangya; Nielsen, Arne Hejde

2017-01-01

stability, this paper proposes supplementary control methods to implement synthetic inertia for doubly-fed induction generator (DFIG) based wind energy system during frequency excursions. Different control strategies and activation schemes are analyzed and implemented on the Western Danish renewable......-based system using-real time digital simulator (RTDS) to propose the best one for the synthetic inertia controller. From the comparative simulation results, it can be concluded that the method using a combination of both the frequency deviation and derivative as input signals, and the under-frequency trigger...

The behaviour of the moment of inertia curve in a recrossing of the ground state band and the super band in 158Er

International Nuclear Information System (INIS)

Dracoulis, G.D.

1978-11-01

The recrossing of the ground state band with the super band as an explanation for the second anomaly in 158 Er is examined in terms of the moment of inertia. A two band mixing calculation does not reproduce the experimenal moment of inertia curve

Emotional inertia contributes to depressive symptoms beyond perseverative thinking.

Science.gov (United States)

Brose, Annette; Schmiedek, Florian; Koval, Peter; Kuppens, Peter

2015-01-01

The autocorrelation or inertia of negative affect reflects how much negative emotions carry over from moment to moment and has been associated with increased depressive symptoms. In this study, we posed three challenges to this association by examining: (1) whether emotional inertia is relevant for depressive symptoms when assessed on a longer timescale than usual; (2) whether inertia is uniquely related to depressive symptoms after controlling for perseverative thoughts; and (3) whether inertia is related to depressive symptoms over and above the within-person association between affect and perseverative thoughts. Participants (N = 101) provided ratings of affect and perseverative thoughts for 100 days; depressive symptoms were reported before and after the study, and again after 2.5 years. Day-to-day emotional inertia was related to depressive symptoms over and above trait and state perseverative thoughts. Moreover, inertia predicted depressive symptoms when adjusting for its association with perseverative thoughts. These findings establish the relevance of emotional inertia in depressive symptoms independent of perseverative thoughts.

Experimental study of the moment of inertia of a cone-angular variation and inertia ellipsoid

International Nuclear Information System (INIS)

Pintao, Carlos A F; Souza de Filho, Moacir P; Usida, Wesley F; Xavier, Jose A

2007-01-01

In this paper, an experimental set-up which differs from the traditional ones is established in order to determine the moment of inertia of a right circular cone. Its angular variation and inertia ellipsoid are determined by means of an experimental study. In addition, a system that allows for the evaluation of the angular acceleration and torque through electric current or frequency measurement is utilized

Collective inertia in paired systems

International Nuclear Information System (INIS)

Arve, P.O.; Bertsch, G.F.; Michigan State Univ., East Lansing

1988-01-01

Two definitions of the collective inertia are examined. One of them was recently proposed and applied in a calculation of exotic radioactivity. The other expression is the Inglis cranking formula. It is shown that the new formula corresponds to rapid collective motion while the cranking corresponds to slow collective motion. It is also seen that the two forms of the inertia differ only in the choice of the collective momentum. (orig.)

Isolated colonic inertia is not usually the cause of chronic constipation.

Science.gov (United States)

Ragg, J; McDonald, R; Hompes, R; Jones, O M; Cunningham, C; Lindsey, I

2011-11-01

Chronic constipation is classified as outlet obstruction, colonic inertia or both. We aimed to determine the incidence of isolated colonic inertia in chronic constipation and to study symptom pattern in those with prolonged colonic transit time. Chronic constipation patients were classified radiologically by surgeon-reported defaecating proctography and transit study into four groups: isolated outlet obstruction, isolated colonic inertia, outlet obstruction plus colonic inertia, or normal. Symptom patterns were defined as stool infrequency (twice weekly or less) or frequent unsuccessful evacuations (more than twice weekly). Of 541 patients with chronic constipation, 289 (53%) were classified as isolated outlet obstruction, 26 (5%) as isolated colonic inertia, 159 (29%) as outlet obstruction plus colonic inertia and 67 (12%) as normal. Of 448 patients (83%) with outlet obstruction, 35% had additional colonic inertia. Only 14% of those with prolonged colonic transit time had isolated colonic inertia. Frequent unsuccessful evacuations rather than stool infrequency was the commonest symptom pattern in all three disease groups (isolated outlet obstruction 86%, isolated colonic inertia 54% and outlet obstruction plus colonic inertia 63%). Isolated colonic inertia is an unusual cause of chronic constipation. Most patients with colonic inertia have associated outlet obstruction. These data question the clinical significance of isolated colonic inertia. © 2011 The Authors. Colorectal Disease © 2011 The Association of Coloproctology of Great Britain and Ireland.

The dynamical behaviour of SS 433

International Nuclear Information System (INIS)

Collins, G.W. II

1985-01-01

In this paper a dynamical formalism is developed for describing the motion of a distorted object moving under the influence of the gravitational fields present in a close binary system. The object is assumed to be centred about one of the components and to have a form or shape sustained by axial forces such as rotation in addition to tides generated by the companion. Although such a shape will not be temporally constant, the moments of inertia are expressible in terms of the canonical coordinates of the problem and vary in a periodic manner. The dynamical behaviour of this 'elastic' body can be expressed in terms of periodic motion analogous to that found in a rigid body. The details of the resultant motion in turn places constraints on the nature of the components of the system. (author)

Nonlinear transient waves in coupled phase oscillators with inertia.

Science.gov (United States)

Jörg, David J

2015-05-01

Like the inertia of a physical body describes its tendency to resist changes of its state of motion, inertia of an oscillator describes its tendency to resist changes of its frequency. Here, we show that finite inertia of individual oscillators enables nonlinear phase waves in spatially extended coupled systems. Using a discrete model of coupled phase oscillators with inertia, we investigate these wave phenomena numerically, complemented by a continuum approximation that permits the analytical description of the key features of wave propagation in the long-wavelength limit. The ability to exhibit traveling waves is a generic feature of systems with finite inertia and is independent of the details of the coupling function.

Mars Surface Heterogeneity From Variations in Apparent Thermal Inertia

Science.gov (United States)

Putzig, N. E.; Mellon, M. T.

2005-12-01

Current techniques used in the calculation of thermal inertia from observed brightness temperatures typically assume that planetary surface properties are uniform on the scale of the instrument's observational footprint. Mixed or layered surfaces may yield different apparent thermal inertia values at different seasons or times of day due to the nonlinear relationship between temperature and thermal inertia. To obtain sufficient data coverage for investigating temporal changes, we processed three Mars years of observations from the Mars Global Surveyor Thermal Emission Spectrometer and produced seasonal nightside and dayside maps of apparent thermal inertia. These maps show broad regions with seasonal and diurnal differences as large as 200 J m-2 K-1 s-½ at mid-latitudes (60°S to 60°N) and ranging up to 600 J m-2 K-1 s-½ or greater in the polar regions. Comparison of the maps with preliminary results from forward-modeling of heterogeneous surfaces indicates that much of the martian surface may be dominated by (1) horizontally mixed surfaces, such as those containing differing proportions of rocks, sand, dust, duricrust, and localized frosts; (2) higher thermal inertia layers over lower thermal inertia substrates, such as duricrust or desert pavements; and (3) lower thermal inertia layers over higher thermal inertia substrates, such as dust over sand or rocks and soils with an ice table at depth.

Treating inertia in passive microbead rheology.

Science.gov (United States)

Indei, Tsutomu; Schieber, Jay D; Córdoba, Andrés; Pilyugina, Ekaterina

2012-02-01

The dynamic modulus G(*) of a viscoelastic medium is often measured by following the trajectory of a small bead subject to Brownian motion in a method called "passive microbead rheology." This equivalence between the positional autocorrelation function of the tracer bead and G(*) is assumed via the generalized Stokes-Einstein relation (GSER). However, inertia of both bead and medium are neglected in the GSER so that the analysis based on the GSER is not valid at high frequency where inertia is important. In this paper we show how to treat both contributions to inertia properly in one-bead passive microrheological analysis. A Maxwell fluid is studied as the simplest example of a viscoelastic fluid to resolve some apparent paradoxes of eliminating inertia. In the original GSER, the mean-square displacement (MSD) of the tracer bead does not satisfy the correct initial condition. If bead inertia is considered, the proper initial condition is realized, thereby indicating an importance of including inertia, but the MSD oscillates at a time regime smaller than the relaxation time of the fluid. This behavior is rather different from the original result of the GSER and what is observed. What is more, the discrepancy from the GSER result becomes worse with decreasing bead mass, and there is an anomalous gap between the MSD derived by naïvely taking the zero-mass limit in the equation of motion and the MSD for finite bead mass as indicated by McKinley et al. [J. Rheol. 53, 1487 (2009)]. In this paper we show what is necessary to take the zero-mass limit of the bead safely and correctly without causing either the inertial oscillation or the anomalous gap, while obtaining the proper initial condition. The presence of a very small purely viscous element can be used to eliminate bead inertia safely once included in the GSER. We also show that if the medium contains relaxation times outside the window where the single-mode Maxwell behavior is observed, the oscillation can be

Virtual inertia for variable speed wind turbines

DEFF Research Database (Denmark)

Zeni, Lorenzo; Rudolph, Andreas Jakob; Münster-Swendsen, Janus

2013-01-01

electronic converter and on its impact on the primary frequency response of a power system. An additional control for the power electronics is implemented to give VSWTs a virtual inertia, referring to the kinetic energy stored in the rotating masses, which can be released initially to support the system......’s inertia. A simple Matlab/Simulink model and control of a VSWT and of a generic power system are developed to analyse the primary frequency response following different generation losses in a system comprising VSWTs provided with virtual inertia. The possibility of substituting a 50% share of conventional...... power with wind is also assessed and investigated. The intrinsic problems related to the implementation of virtual inertia are illustrated, addressing their origin in the action of pitch and power control. A solution is proposed, which aims at obtaining the same response as for the system with only...

Neural predictors of emotional inertia in daily life.

Science.gov (United States)

Waugh, Christian E; Shing, Elaine Z; Avery, Bradley M; Jung, Youngkyoo; Whitlow, Christopher T; Maldjian, Joseph A

2017-09-01

Assessing emotional dynamics in the brain offers insight into the fundamental neural and psychological mechanisms underlying emotion. One such dynamic is emotional inertia-the influence of one's emotional state at one time point on one's emotional state at a subsequent time point. Emotion inertia reflects emotional rigidity and poor emotion regulation as evidenced by its relationship to depression and neuroticism. In this study, we assessed changes in cerebral blood flow (CBF) from before to after an emotional task and used these changes to predict stress, positive and negative emotional inertia in daily life events. Cerebral blood flow changes in the lateral prefrontal cortex (lPFC) predicted decreased non-specific emotional inertia, suggesting that the lPFC may feature a general inhibitory mechanism responsible for limiting the impact that an emotional state from one event has on the emotional state of a subsequent event. CBF changes in the ventromedial prefrontal cortex and lateral occipital cortex were associated with positive emotional inertia and negative/stress inertia, respectively. These data advance the blossoming literature on the temporal dynamics of emotion in the brain and on the use of neural indices to predict mental health-relevant behavior in daily life. © The Author (2017). Published by Oxford University Press.

Moment of inertia and the interacting boson model

International Nuclear Information System (INIS)

Yoshida, N.; Sagawa, H.; Otsuka, T.; Arima, A.

1989-01-01

Mass-number dependence of the moment of inertia is studied in relation with the boson number in the SU(3) limit of the interacting boson model 1 (IBM-1). The analytic formula in the limit indicates the pairing correlation between nucleons is directly related to the moment of inertia in the IBM. It is shown in general that the kink of the moment of inertia coincides with the maximum boson number of each element. (author)

Together we have fun: native-place networks and sexual risk behaviours among Chinese male rural-urban migrants.

Science.gov (United States)

Yang, Xiaozhao Yousef; Kelly, Brian C; Yang, Tingzhong

2016-05-01

Some scholars argue that the maintenance of social networks contributes to the lower prevalence of deviant behaviours and fewer adverse health effects among migrants. But others suggest that if migrants are embedded in homogeneous networks, such networks may enable the formation of a deviant subculture that promotes risk taking. Facing this dilemma, the present study investigates how native-place networks influence sexual risk behaviours (SRBs), specifically the pursuit of commercial sex and condomless sex with sex workers, for male rural-urban migrants. Using a multi-stage sample of 1,591 male rural-urban migrants from two major migrant-influx cities within China, we assessed migrants' general friend network ties and native place networks (townsmen in migrants' local networks) and tested their associations with SRBs. Multiple logistic regression analyses indicate that native-place network ties are associated with paying for sex (OR = 1.33, p < 0.001) and condomless sex with sex workers (OR = 1.33, p < 0.001), while general friendship network ties reduce such risks (OR = 0.74, p < 0.001; OR = 0.84, p < 0.01) even after controlling for demographic background, housing conditions, length of stay, health beliefs and behaviours, and spousal companionship. Our findings suggest that native-place networks among Chinese male rural-urban migrants are associated with SRBs because homogenous networks may serve as a platform for the emergence of a deviant subculture that promotes risk behaviours. A Virtual Abstract of this paper is available at: https://www.youtube.com/watch?v=3Wg20I6j8XQ. © 2015 Foundation for the Sociology of Health & Illness.

Selective effects of weight and inertia on maximum lifting.

Science.gov (United States)

Leontijevic, B; Pazin, N; Kukolj, M; Ugarkovic, D; Jaric, S

2013-03-01

A novel loading method (loading ranged from 20% to 80% of 1RM) was applied to explore the selective effects of externally added simulated weight (exerted by stretched rubber bands pulling downward), weight+inertia (external weights added), and inertia (covariation of the weights and the rubber bands pulling upward) on maximum bench press throws. 14 skilled participants revealed a load associated decrease in peak velocity that was the least associated with an increase in weight (42%) and the most associated with weight+inertia (66%). However, the peak lifting force increased markedly with an increase in both weight (151%) and weight+inertia (160%), but not with inertia (13%). As a consequence, the peak power output increased most with weight (59%), weight+inertia revealed a maximum at intermediate loads (23%), while inertia was associated with a gradual decrease in the peak power output (42%). The obtained findings could be of importance for our understanding of mechanical properties of human muscular system when acting against different types of external resistance. Regarding the possible application in standard athletic training and rehabilitation procedures, the results speak in favor of applying extended elastic bands which provide higher movement velocity and muscle power output than the usually applied weights. © Georg Thieme Verlag KG Stuttgart · New York.

Virtual Inertia: Current Trends and Future Directions

Directory of Open Access Journals (Sweden)

Ujjwol Tamrakar

2017-06-01

Full Text Available The modern power system is progressing from a synchronous machine-based system towards an inverter-dominated system, with large-scale penetration of renewable energy sources (RESs like wind and photovoltaics. RES units today represent a major share of the generation, and the traditional approach of integrating them as grid following units can lead to frequency instability. Many researchers have pointed towards using inverters with virtual inertia control algorithms so that they appear as synchronous generators to the grid, maintaining and enhancing system stability. This paper presents a literature review of the current state-of-the-art of virtual inertia implementation techniques, and explores potential research directions and challenges. The major virtual inertia topologies are compared and classified. Through literature review and simulations of some selected topologies it has been shown that similar inertial response can be achieved by relating the parameters of these topologies through time constants and inertia constants, although the exact frequency dynamics may vary slightly. The suitability of a topology depends on system control architecture and desired level of detail in replication of the dynamics of synchronous generators. A discussion on the challenges and research directions points out several research needs, especially for systems level integration of virtual inertia systems.

The role of population inertia in predicting the outcome of stage-structured biological invasions.

Science.gov (United States)

Guiver, Chris; Dreiwi, Hanan; Filannino, Donna-Maria; Hodgson, Dave; Lloyd, Stephanie; Townley, Stuart

2015-07-01

Deterministic dynamic models for coupled resident and invader populations are considered with the purpose of finding quantities that are effective at predicting when the invasive population will become established asymptotically. A key feature of the models considered is the stage-structure, meaning that the populations are described by vectors of discrete developmental stage- or age-classes. The vector structure permits exotic transient behaviour-phenomena not encountered in scalar models. Analysis using a linear Lyapunov function demonstrates that for the class of population models considered, a large so-called population inertia is indicative of successful invasion. Population inertia is an indicator of transient growth or decline. Furthermore, for the class of models considered, we find that the so-called invasion exponent, an existing index used in models for invasion, is not always a reliable comparative indicator of successful invasion. We highlight these findings through numerical examples and a biological interpretation of why this might be the case is discussed. Copyright © 2015. Published by Elsevier Inc.

An Alternative Approach to Mapping Thermophysical Units from Martian Thermal Inertia and Albedo Data Using a Combination of Unsupervised Classification Techniques

Directory of Open Access Journals (Sweden)

Eriita Jones

2014-06-01

Full Text Available Thermal inertia and albedo provide information on the distribution of surface materials on Mars. These parameters have been mapped globally on Mars by the Thermal Emission Spectrometer (TES onboard the Mars Global Surveyor. Two-dimensional clusters of thermal inertia and albedo reflect the thermophysical attributes of the dominant materials on the surface. In this paper three automated, non-deterministic, algorithmic classification methods are employed for defining thermophysical units: Expectation Maximisation of a Gaussian Mixture Model; Iterative Self-Organizing Data Analysis Technique (ISODATA; and Maximum Likelihood. We analyse the behaviour of the thermophysical classes resulting from the three classifiers, operating on the 2007 TES thermal inertia and albedo datasets. Producing a rigorous mapping of thermophysical classes at ~3 km/pixel resolution remains important for constraining the geologic processes that have shaped the Martian surface on a regional scale, and for choosing appropriate landing sites. The results from applying these algorithms are compared to geologic maps, surface data from lander missions, features derived from imaging, and previous classifications of thermophysical units which utilized manual (and potentially more time consuming classification methods. These comparisons comprise data suitable for validation of our classifications. Our work shows that a combination of the algorithms—ISODATA and Maximum Likelihood—optimises the sensitivity to the underlying dataspace, and that new information on Martian surface materials can be obtained by using these methods. We demonstrate that the algorithms used here can be applied to define a finer partitioning of albedo and thermal inertia for a more detailed mapping of surface materials, grain sizes and thermal behaviour of the Martian surface and shallow subsurface, at the ~3 km scale.

Dynamical moments of inertia for superdeformed nuclei

International Nuclear Information System (INIS)

Obikhod, T.V.

1995-01-01

The method of quantum groups has been applied for calculation the dynamical moments of inertia for the yrast superdeformed bands in 194 Hg and 192 Hg as well as to calculation of the dynamical moments of inertia of superdeformed bands in 150 Gd and 148 Gd

Effects of microscale inertia on dynamic ductile crack growth

Science.gov (United States)

Jacques, N.; Mercier, S.; Molinari, A.

2012-04-01

The aim of this paper is to investigate the role of microscale inertia in dynamic ductile crack growth. A constitutive model for porous solids that accounts for dynamic effects due to void growth is proposed. The model has been implemented in a finite element code and simulations of crack growth in a notched bar and in an edge cracked specimen have been performed. Results are compared to predictions obtained via the Gurson-Tvergaard-Needleman (GTN) model where micro-inertia effects are not accounted for. It is found that microscale inertia has a significant influence on the crack growth. In particular, it is shown that micro-inertia plays an important role during the strain localisation process by impeding void growth. Therefore, the resulting damage accumulation occurs in a more progressive manner. For this reason, simulations based on the proposed modelling exhibit much less mesh sensitivity than those based on the viscoplastic GTN model. Microscale inertia is also found to lead to lower crack speeds. Effects of micro-inertia on fracture toughness are evaluated.

Neutron star moments of inertia

Science.gov (United States)

Ravenhall, D. G.; Pethick, C. J.

1994-01-01

An approximation for the moment of inertia of a neutron star in terms of only its mass and radius is presented, and insight into it is obtained by examining the behavior of the relativistic structural equations. The approximation is accurate to approximately 10% for a variety of nuclear equations of state, for all except very low mass stars. It is combined with information about the neutron-star crust to obtain a simple expression (again in terms only of mass and radius) for the fractional moment of inertia of the crust.

Kπ=0+ band moment of inertia anomaly

International Nuclear Information System (INIS)

Zeng, J.Y.; Wu, C.S.; Cheng, L.; Lin, C.Z.; China Center of Advanced Science and Technology

1990-01-01

The moments of inertia of K π =0 + bands in the well-deformed nuclei are calculated by a particle-number-conserving treatment for the cranked shell model. The very accurate solutions to the low-lying K π =0 + bands are obtained by making use of an effective K truncation. Calculations show that the main contribution to the moments of inertia comes from the nucleons in the intruding high-j orbits. Considering the fact that no free parameter is involved in the calculation and no extra inert core contribution is added, the agreement between the calculated and the observed moments of inertia of 0 + bands in 168 Er is very satisfactory

Physician and patient characteristics associated with clinical inertia in blood pressure control.

Science.gov (United States)

Harle, Christopher A; Harman, Jeffrey S; Yang, Shuo

2013-11-01

Clinical inertia, the failure to adjust antihypertensive medications during patient visits with uncontrolled hypertension, is thought to be a common problem. This retrospective study used 5 years of electronic medical records from a multispecialty group practice to examine the association between physician and patient characteristics and clinical inertia. Hierarchical linear models (HLMs) were used to examine (1) differences in physician and patient characteristics among patients with and without clinical inertia, and (2) the association between clinical inertia and future uncontrolled hypertension. Overall, 66% of patients experienced clinical inertia. Clinical inertia was associated with one physician characteristic, patient volume (odds ratio [OR]=0.998). However, clinical inertia was associated with multiple patient characteristics, including patient age (OR=1.021), commercial insurance (OR=0.804), and obesity (OR=1.805). Finally, patients with clinical inertia had 2.9 times the odds of uncontrolled hypertension at their final visit in the study period. These findings may aid the design of interventions to reduce clinical inertia. ©2013 Wiley Periodicals, Inc.

Nonlinear Inertia Classification Model and Application

Directory of Open Access Journals (Sweden)

Mei Wang

2014-01-01

Full Text Available Classification model of support vector machine (SVM overcomes the problem of a big number of samples. But the kernel parameter and the punishment factor have great influence on the quality of SVM model. Particle swarm optimization (PSO is an evolutionary search algorithm based on the swarm intelligence, which is suitable for parameter optimization. Accordingly, a nonlinear inertia convergence classification model (NICCM is proposed after the nonlinear inertia convergence (NICPSO is developed in this paper. The velocity of NICPSO is firstly defined as the weighted velocity of the inertia PSO, and the inertia factor is selected to be a nonlinear function. NICPSO is used to optimize the kernel parameter and a punishment factor of SVM. Then, NICCM classifier is trained by using the optical punishment factor and the optical kernel parameter that comes from the optimal particle. Finally, NICCM is applied to the classification of the normal state and fault states of online power cable. It is experimentally proved that the iteration number for the proposed NICPSO to reach the optimal position decreases from 15 to 5 compared with PSO; the training duration is decreased by 0.0052 s and the recognition precision is increased by 4.12% compared with SVM.

Dependence of nuclear moments of inertia on the triaxial parameter

International Nuclear Information System (INIS)

Helgesson, J.; Hamamoto, Ikuko

1989-01-01

The dependence of nuclear moments of inertia on the triaxial parameter (γ-variable) is investigated including both the Belyaev term and the Migdal term. The obtained dependence is compared with that of hydrodynamical moments of inertia and other moments of inertia used conventionally. (orig.)

Calculation of concentration fields of high-inertia aerosol particles in the flow past a cylindrical fibre

Science.gov (United States)

Zaripov, T. S.; Gilfanov, A. K.; Zaripov, S. K.; Rybdylova, O. D.; Sazhin, S. S.

2018-01-01

The behaviour of high-inertia aerosol particles’ concentration fields in stationary gas suspension flows around a cylinder is investigated using a numerical solution to the Navier-Stokes equations and the fully Lagrangian approach for four Stokes numbers (Stk = 0.1, 1, 4, 10) and three Reynolds numbers (Re = 1, 10, 100). It has been shown that the points of maximum particle concentration along each trajectory shift downstream both when Stk and/or Re increase.

Thermal inertia and surface heterogeneity on Mars

Science.gov (United States)

Putzig, Nathaniel E.

Thermal inertia derived from temperature observations is critical for understanding surface geology and assessing potential landing sites on Mars. Derivation methods generally assume uniform surface properties for any given observation. Consequently, horizontal heterogeneity and near-surface layering may yield apparent thermal inertia that varies with time of day and season. To evaluate the effects of horizontal heterogeneity, I modeled the thermal behavior of surfaces containing idealized material mixtures (dust, sand, duricrust, and rocks) and differing slope facets. These surfaces exhibit diurnal and seasonal variability in apparent thermal inertia of several 100 tiu, 1 even for components with moderately contrasting thermal properties. To isolate surface effects on the derived thermal inertia of Mars, I mapped inter- annual and seasonal changes in albedo and atmospheric dust opacity, accounting for their effects in a modified derivation algorithm. Global analysis of three Mars years of MGS-TES 2 data reveals diurnal and seasonal variations of ~200 tiu in the mid-latitudes and 600 tiu or greater in the polar regions. Correlation of TES results and modeled apparent thermal inertia of heterogeneous surfaces indicates pervasive surface heterogeneity on Mars. At TES resolution, the near-surface thermal response is broadly dominated by layering and is consistent with the presence of duricrusts over fines in the mid-latitudes and dry soils over ground ice in the polar regions. Horizontal surface mixtures also play a role and may dominate at higher resolution. In general, thermal inertia obtained from single observations or annually averaged maps may misrepresent surface properties. In lieu of a robust heterogeneous- surface derivation technique, repeat coverage can be used together with forward-modeling results to constrain the near-surface heterogeneity of Mars. 1 tiu == J m -2 K -1 s - 2 Mars Global Surveyor Thermal Emission Spectrometer

From resistance to relational inertia

DEFF Research Database (Denmark)

Scheuer, John Damm

-network-theory as a point of departure a new concept – relational inertia – is developed. In this view change agents are theorized as translators who interacts with humans as well as non-humans (objects) in order to construct different types of socio-technical systems which are constructed to perform certain “wished...... inertia that had to be handled in order to succeed with constructing a performative socio-technical risk-management system in practice. Finally it is discussed how this view supplements the resistance to change view and other views with a focus on barriers to change....

A Novel Flexible Inertia Weight Particle Swarm Optimization Algorithm.

Science.gov (United States)

Amoshahy, Mohammad Javad; Shamsi, Mousa; Sedaaghi, Mohammad Hossein

2016-01-01

Particle swarm optimization (PSO) is an evolutionary computing method based on intelligent collective behavior of some animals. It is easy to implement and there are few parameters to adjust. The performance of PSO algorithm depends greatly on the appropriate parameter selection strategies for fine tuning its parameters. Inertia weight (IW) is one of PSO's parameters used to bring about a balance between the exploration and exploitation characteristics of PSO. This paper proposes a new nonlinear strategy for selecting inertia weight which is named Flexible Exponential Inertia Weight (FEIW) strategy because according to each problem we can construct an increasing or decreasing inertia weight strategy with suitable parameters selection. The efficacy and efficiency of PSO algorithm with FEIW strategy (FEPSO) is validated on a suite of benchmark problems with different dimensions. Also FEIW is compared with best time-varying, adaptive, constant and random inertia weights. Experimental results and statistical analysis prove that FEIW improves the search performance in terms of solution quality as well as convergence rate.

Nuclear inertia for fission in a generalized cranking model

International Nuclear Information System (INIS)

Kunz, J.; Nix, J.R.

1984-01-01

A time dependent formalism which is appropriate for β vibrations and fission is developed for a generalized cranking model. The formalism leads to additional terms in the density matrix which affect the nuclear inertia. The case of a harmonic oscillator potential is used to demonstrate the contribution of the pairing gap term on the β vibrational inertia for Pu 240. The inertia remains finite and close to the limiting irrotational value

Therapeutic inertia amongst general practitioners with interest in diabetes.

Science.gov (United States)

Seidu, Samuel; Than, Tun; Kar, Deb; Lamba, Amrit; Brown, Pam; Zafar, Azhar; Hussain, Rizwan; Amjad, Ahmed; Capehorn, Mathew; Martin, Elizabeth; Fernando, Kevin; McMoran, Jim; Millar-Jones, David; Kahn, Shahzada; Campbell, Nigel; Brice, Richard; Mohan, Rahul; Mistry, Mukesh; Kanumilli, Naresh; St John, Joan; Quigley, Richard; Kenny, Colin; Khunti, Kamlesh

2018-02-01

As the therapeutic options in the management of type 2 diabetes increase, there is an increase confusion among health care professionals, thus leading to the phenomenon of therapeutic inertia. This is the failure to escalate or de-escalate treatment when the clinical need for this is required. It has been studied extensively in various settings, however, it has never been reported in any studies focusing solely on primary care physicians with an interest in diabetes. This group is increasingly becoming the focus of managing complex diabetes care in the community, albeit with the support from specialists. In this retrospective audit, we assessed the prevalence of the phenomenon of therapeutic inertia amongst primary care physicians with an interest in diabetes in UK. We also assessed the predictive abilities of various patient level characteristics on therapeutic inertia amongst this group of clinicians. Out of the 240 patients reported on, therapeutic inertia was judged to have occurred in 53 (22.1%) of patients. The full model containing all the selected variables was not statistically significant, p=0.59. So the model was not able to distinguish between situations in which therapeutic inertia occurred and when it did not occur. None of the patient level characteristics on its own was predictive of therapeutic inertia. Therapeutic inertia was present only in about a fifth of patient patients with diabetes being managed by primary care physicians with an interest in diabetes. Copyright © 2017 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

Implementation and validation of synthetic inertia support employing series produced electric vehicles

DEFF Research Database (Denmark)

Rezkalla, Michel M.N.; Martinenas, Sergejus; Zecchino, Antonio

2017-01-01

The high integration of renewable energy resources (inverter connected) replacing conventional generation reduces the available rotational inertia in the power system. This introduces the need for faster regulation services including synthetic inertia services. These services could potentially...... be provided by electric vehicles due to their fast response capability. This work evaluates and experimentally shows the capability and limits of EVs in providing synthetic inertia services. Three series produced EVs are used during the experiment. The results show the performance of the EVs in providing...... synthetic inertia. It shows also that, on the contrary of synchronous inertia, synthetic inertia might lead to unstable frequency behavior....

A Novel Flexible Inertia Weight Particle Swarm Optimization Algorithm

Science.gov (United States)

Shamsi, Mousa; Sedaaghi, Mohammad Hossein

2016-01-01

Particle swarm optimization (PSO) is an evolutionary computing method based on intelligent collective behavior of some animals. It is easy to implement and there are few parameters to adjust. The performance of PSO algorithm depends greatly on the appropriate parameter selection strategies for fine tuning its parameters. Inertia weight (IW) is one of PSO’s parameters used to bring about a balance between the exploration and exploitation characteristics of PSO. This paper proposes a new nonlinear strategy for selecting inertia weight which is named Flexible Exponential Inertia Weight (FEIW) strategy because according to each problem we can construct an increasing or decreasing inertia weight strategy with suitable parameters selection. The efficacy and efficiency of PSO algorithm with FEIW strategy (FEPSO) is validated on a suite of benchmark problems with different dimensions. Also FEIW is compared with best time-varying, adaptive, constant and random inertia weights. Experimental results and statistical analysis prove that FEIW improves the search performance in terms of solution quality as well as convergence rate. PMID:27560945

Multiple superdeformed bands in sup 194 Hg and their dynamical moments of inertia

Energy Technology Data Exchange (ETDEWEB)

Riley, M.A.; Cullen, D.M.; Alderson, A.; Ali, I.; Fallon, P.; Forsyth, P.D.; Hanna, F.; Mullins, S.M.; Roberts, J.W.; Sharpey-Schafer, J.F.; Twin, P.J. (Liverpool Univ. (UK). Oliver Lodge Lab.); Poynter, R.; Wadsworth, R. (York Univ. (UK). Dept. of Physics); Bentley, M.A.; Bruce, A.M.; Simpson, J. (Science and Engineering Research Council, Daresbury (UK). Daresbury Lab.); Sletten, G. (Niels Bohr Inst., Roskilde (Denmark). Tandem Accelerator Lab.); Nazarewicz, W. (Liverpool Univ. (UK). Oliver Lodge Lab. Politechnika Warszawska (Poland). Inst. Fizyki); Bengtsson, T. (Lund Inst. of Tech. (Sweden). Dept. of Mathematical Physics); Wyss, R. (Manne Siegbahn Inst. of Physics, Stockholm (Sweden))

1990-05-28

Three superdeformed bands have been observed in {sup 194}Hg. The dynamical moment of inertia J{sup (2)} of all three bands is observed to increase by 30-40% over the frequency range {Dirac h}{omega}=0.1-0.4 MeV. This phenomena can be understood in terms of the gradual alignment of pairs of high-j intruder orbitals within the framework of the cranked Woods-Saxon and Nilsson models including pairing. The calculations together with the observed J{sup (2)} behaviour of the three bands indicate that pairing correlations in the superdeformed minimum are rather weak. (orig.).

Compensations for increased rotational inertia during human cutting turns.

Science.gov (United States)

Qiao, Mu; Brown, Brian; Jindrich, Devin L

2014-02-01

Locomotion in a complex environment is often not steady state, but unsteady locomotion (stability and maneuverability) is not well understood. We investigated the strategies used by humans to perform sidestep cutting turns when running. Previous studies have argued that because humans have small yaw rotational moments of inertia relative to body mass, deceleratory forces in the initial velocity direction that occur during the turning step, or 'braking' forces, could function to prevent body over-rotation during turns. We tested this hypothesis by increasing body rotational inertia and testing whether braking forces during stance decreased. We recorded ground reaction force and body kinematics from seven participants performing 45 deg sidestep cutting turns and straight running at five levels of body rotational inertia, with increases up to fourfold. Contrary to our prediction, braking forces remained consistent at different rotational inertias, facilitated by anticipatory changes to body rotational speed. Increasing inertia revealed that the opposing effects of several turning parameters, including rotation due to symmetrical anterior-posterior forces, result in a system that can compensate for fourfold changes in rotational inertia with less than 50% changes to rotational velocity. These results suggest that in submaximal effort turning, legged systems may be robust to changes in morphological parameters, and that compensations can involve relatively minor adjustments between steps to change initial stance conditions.

Decoupling Identification for Serial Two-Link Two-Inertia System

Science.gov (United States)

Oaki, Junji; Adachi, Shuichi

The purpose of our study is to develop a precise model by applying the technique of system identification for the model-based control of a nonlinear robot arm, under taking joint-elasticity into consideration. We previously proposed a systematic identification method, called “decoupling identification,” for a “SCARA-type” planar two-link robot arm with elastic joints caused by the Harmonic-drive® reduction gears. The proposed method serves as an extension of the conventional rigid-joint-model-based identification. The robot arm is treated as a serial two-link two-inertia system with nonlinearity. The decoupling identification method using link-accelerometer signals enables the serial two-link two-inertia system to be divided into two linear one-link two-inertia systems. The MATLAB®'s commands for state-space model estimation are utilized in the proposed method. Physical parameters such as motor inertias, link inertias, joint-friction coefficients, and joint-spring coefficients are estimated through the identified one-link two-inertia systems using a gray-box approach. This paper describes accuracy evaluations using the two-link arm for the decoupling identification method under introducing closed-loop-controlled elements and varying amplitude-setup of identification-input. Experimental results show that the identification method also works with closed-loop-controlled elements. Therefore, the identification method is applicable to a “PUMA-type” vertical robot arm under gravity.

Changes in inertia and effect on turning effort across different wheelchair configurations.

Science.gov (United States)

Caspall, Jayme J; Seligsohn, Erin; Dao, Phuc V; Sprigle, Stephen

2013-01-01

When executing turning maneuvers, manual wheelchair users must overcome the rotational inertia of the wheelchair system. Differences in wheelchair rotational inertia can result in increases in torque required to maneuver, resulting in greater propulsion effort and stress on the shoulder joints. The inertias of various configurations of an ultralightweight wheelchair were measured using a rotational inertia-measuring device. Adjustments in axle position, changes in wheel and tire type, and the addition of several accessories had various effects on rotational inertias. The configuration with the highest rotational inertia (solid tires, mag wheels with rearward axle) exceeded the configuration with the lowest (pneumatic tires, spoke wheels with forward axle) by 28%. The greater inertia requires increased torque to accelerate the wheelchair during turning. At a representative maximum acceleration, the reactive torque spanned the range of 11.7 to 15.0 N-m across the wheelchair configurations. At higher accelerations, these torques exceeded that required to overcome caster scrub during turning. These results indicate that a wheelchair's rotational inertia can significantly influence the torque required during turning and that this influence will affect active users who turn at higher speeds. Categorizing wheelchairs using both mass and rotational inertia would better represent differences in effort during wheelchair maneuvers.

Hysteretic transitions in the Kuramoto model with inertia.

Science.gov (United States)

Olmi, Simona; Navas, Adrian; Boccaletti, Stefano; Torcini, Alessandro

2014-10-01

We report finite-size numerical investigations and mean-field analysis of a Kuramoto model with inertia for fully coupled and diluted systems. In particular, we examine, for a gaussian distribution of the frequencies, the transition from incoherence to coherence for increasingly large system size and inertia. For sufficiently large inertia the transition is hysteretic, and within the hysteretic region clusters of locked oscillators of various sizes and different levels of synchronization coexist. A modification of the mean-field theory developed by Tanaka, Lichtenberg, and Oishi [Physica D 100, 279 (1997)] allows us to derive the synchronization curve associated to each of these clusters. We have also investigated numerically the limits of existence of the coherent and of the incoherent solutions. The minimal coupling required to observe the coherent state is largely independent of the system size, and it saturates to a constant value already for moderately large inertia values. The incoherent state is observable up to a critical coupling whose value saturates for large inertia and for finite system sizes, while in the thermodinamic limit this critical value diverges proportionally to the mass. By increasing the inertia the transition becomes more complex, and the synchronization occurs via the emergence of clusters of whirling oscillators. The presence of these groups of coherently drifting oscillators induces oscillations in the order parameter. We have shown that the transition remains hysteretic even for randomly diluted networks up to a level of connectivity corresponding to a few links per oscillator. Finally, an application to the Italian high-voltage power grid is reported, which reveals the emergence of quasiperiodic oscillations in the order parameter due to the simultaneous presence of many competing whirling clusters.

Inertia effects on the rigid displacement approximation of tokamak plasma vertical motion

International Nuclear Information System (INIS)

Carrera, R.; Khayrutdinov, R.R.; Azizov, E.A.; Montalvo, E.; Dong, J.Q.

1991-01-01

Elongated plasmas in tokamaks are unstable to axisymmetric vertical displacements. The vacuum vessel and passive conductors can stabilize the plasma motion in the short time scale. For stabilization of the plasma movement in the long time scale an active feedback control system is required. A widely used method of plasma stability analysis uses the Rigid Displacement Model (RDM) of plasma behavior. In the RDM it is assumed that the plasma displacement is small and usually plasma inertia effects are neglected. In addition, it is considered that no changes in plasma shape, plasma current, and plasma current profile take place throughout the plasma motion. It has been demonstrated that the massless-filament approximation (instantaneous force-balance) accurately reproduces the unstable root of the passive stabilization problem. Then, on the basis that the instantaneous force-balance approximation is correct in the passive stabilization analysis, the massless approximation is utilized also in the study of the plasma vertical stabilization by active feedback. The authors show here that the RDM (without mass effects included) does not provide correct stability results for a tokamak configuration (plasma column, passive conductors, and feedback control coils). Therefore, it is concluded that inertia effects have to be retained in the RDM system of equations. It is shown analytically and numerically that stability diagrams with and without plasma-mass corrections differ significantly. When inertia effects are included, the stability region is more restricted than obtained in the massless approximation

Magnetic moment of inertia within the torque-torque correlation model.

Science.gov (United States)

Thonig, Danny; Eriksson, Olle; Pereiro, Manuel

2017-04-19

An essential property of magnetic devices is the relaxation rate in magnetic switching which strongly depends on the energy dissipation. This is described by the Landau-Lifshitz-Gilbert equation and the well known damping parameter, which has been shown to be reproduced from quantum mechanical calculations. Recently the importance of inertia phenomena have been discussed for magnetisation dynamics. This magnetic counterpart to the well-known inertia of Newtonian mechanics, represents a research field that so far has received only limited attention. We present and elaborate here on a theoretical model for calculating the magnetic moment of inertia based on the torque-torque correlation model. Particularly, the method has been applied to bulk itinerant magnets and we show that numerical values are comparable with recent experimental measurements. The theoretical analysis shows that even though the moment of inertia and damping are produced by the spin-orbit coupling, and the expression for them have common features, they are caused by very different electronic structure mechanisms. We propose ways to utilise this in order to tune the inertia experimentally, and to find materials with significant inertia dynamics.

Effects of moment of inertia on restricted motion swing speed.

Science.gov (United States)

Schorah, David; Choppin, Simon; James, David

2015-06-01

In many sports, the maximum swing speed of a racket, club, or bat is a key performance parameter. Previous research in multiple sports supports the hypothesis of an inverse association between the swing speed and moment of inertia of an implement. The aim of this study was to rigorously test and quantify this relationship using a restricted swinging motion. Eight visually identical rods with a common mass but variable moment of inertia were manufactured. Motion capture technology was used to record eight participants' maximal effort swings with the rods. Strict exclusion criteria were applied to data that did not adhere to the prescribed movement pattern. The study found that for all participants, swing speed decreased with respect to moment of inertia according to a power relationship. However, in contrast to previous studies, the rate of decrease varied from participant to participant. With further analysis it was found that participants performed more consistently at the higher end of the moment of inertia range tested. The results support the inverse association between swing speed and moment of inertia but only for higher moment of inertia implements.

Nuclear moment of inertia and spin distribution of nuclear levels

International Nuclear Information System (INIS)

Alhassid, Y.; Fang, L.; Liu, S.; Bertsch, G.F.

2005-01-01

We introduce a simple model to calculate the nuclear moment of inertia at finite temperature. This moment of inertia describes the spin distribution of nuclear levels in the framework of the spin-cutoff model. Our model is based on a deformed single-particle Hamiltonian with pairing interaction and takes into account fluctuations in the pairing gap. We derive a formula for the moment of inertia at finite temperature that generalizes the Belyaev formula for zero temperature. We show that a number-parity projection explains the strong odd-even effects observed in shell model Monte Carlo studies of the nuclear moment of inertia in the iron region

Inertia and Double Bending of Light from Equivalence

Science.gov (United States)

Shuler, Robert L., Jr.

2010-01-01

Careful examination of light paths in an accelerated reference frame, with use of Special Relativity, can account fully for the observed bending of light in a gravitational field, not just half of it as reported in 1911. This analysis also leads to a Machian formulation of inertia similar to the one proposed by Einstein in 1912 and later derived from gravitational field equations in Minkowsky Space by Sciama in 1953. There is a clear inference from equivalence that there is some type of inertial mass increase in a gravitational field. It is the purpose of the current paper to suggest that equivalence provides a more complete picture of gravitational effects than previously thought, correctly predicting full light bending, and that since the theory of inertia is derivable from equivalence, any theory based on equivalence must take account of it. Einstein himself clearly was not satisfied with the status of inertia in GRT, as our quotes have shown. Many have tried to account for inertia and met with less than success, for example Davidson s integration of Sciama s inertia into GRT but only for a steady state cosmology [10], and the Machian gravity theory of Brans and Dicke [11]. Yet Mach s idea hasn t gone away, and now it seems that it cannot go away without also disposing of equivalence.

Filament stretching rheometer: inertia compensation revisited

DEFF Research Database (Denmark)

Szabo, Peter; McKinley, Gareth H.

2003-01-01

The necessary inertia compensation used in the force balance for the filament stretching rheometer is derived for an arbitrary frame of reference. This enables the force balance to be used to extract correctly the extensional viscosity from measurements of the tensile force at either end of the e......The necessary inertia compensation used in the force balance for the filament stretching rheometer is derived for an arbitrary frame of reference. This enables the force balance to be used to extract correctly the extensional viscosity from measurements of the tensile force at either end...

The cranking moment of inertia in a static potential

International Nuclear Information System (INIS)

Bengtsson, R.; Hamamoto, I.; Ibarra, R.H.

1978-01-01

Taking into account the self-consistency condition for the deformation, the authors estimate the cranking moment of inertia in the absence of pair-correlations for the Woods-Saxon potential and various versions of the modified oscillator potential. The authors investigate the expectation that in a static potential the moment of inertia is almost equal to the rigid-body moment of inertia at the self-consistent deformation. They examine especially the consequence of the presence of the l 2 term in the conventional modified oscillator potential. (Auth.)

Apparent thermal inertia and the surface heterogeneity of Mars

Science.gov (United States)

Putzig, Nathaniel E.; Mellon, Michael T.

2007-11-01

Thermal inertia derivation techniques generally assume that surface properties are uniform at horizontal scales below the footprint of the observing instrument and to depths of several decimeters. Consequently, surfaces with horizontal or vertical heterogeneity may yield apparent thermal inertia which varies with time of day and season. To investigate these temporal variations, we processed three Mars years of Mars Global Surveyor Thermal Emission Spectrometer observations and produced global nightside and dayside seasonal maps of apparent thermal inertia. These maps show broad regions with diurnal and seasonal differences up to 200 J m -2 K -1s -1/2 at mid-latitudes (60° S to 60° N) and 600 J m -2 K -1s -1/2 or greater in the polar regions. We compared the seasonal mapping results with modeled apparent thermal inertia and created new maps of surface heterogeneity at 5° resolution, delineating regions that have thermal characteristics consistent with horizontal mixtures or layers of two materials. The thermal behavior of most regions on Mars appears to be dominated by layering, with upper layers of higher thermal inertia (e.g., duricrusts or desert pavements over fines) prevailing in mid-latitudes and upper layers of lower thermal inertia (e.g., dust-covered rock, soils with an ice table at shallow depths) prevailing in polar regions. Less common are regions dominated by horizontal mixtures, such as those containing differing proportions of rocks, sand, dust, and duricrust or surfaces with divergent local slopes. Other regions show thermal behavior that is more complex and not well-represented by two-component surface models. These results have important implications for Mars surface geology, climate modeling, landing-site selection, and other endeavors that employ thermal inertia as a tool for characterizing surface properties.

The role of inertia in modeling decisions from experience with instance-based learning.

Science.gov (United States)

Dutt, Varun; Gonzalez, Cleotilde

2012-01-01

One form of inertia is the tendency to repeat the last decision irrespective of the obtained outcomes while making decisions from experience (DFE). A number of computational models based upon the Instance-Based Learning Theory, a theory of DFE, have included different inertia implementations and have shown to simultaneously account for both risk-taking and alternations between alternatives. The role that inertia plays in these models, however, is unclear as the same model without inertia is also able to account for observed risk-taking quite well. This paper demonstrates the predictive benefits of incorporating one particular implementation of inertia in an existing IBL model. We use two large datasets, estimation and competition, from the Technion Prediction Tournament involving a repeated binary-choice task to show that incorporating an inertia mechanism in an IBL model enables it to account for the observed average risk-taking and alternations. Including inertia, however, does not help the model to account for the trends in risk-taking and alternations over trials compared to the IBL model without the inertia mechanism. We generalize the two IBL models, with and without inertia, to the competition set by using the parameters determined in the estimation set. The generalization process demonstrates both the advantages and disadvantages of including inertia in an IBL model.

Independent effects of adding weight and inertia on balance during quiet standing.

Science.gov (United States)

Costello, Kerry Elizabeth; Matrangola, Sara Louise; Madigan, Michael Lawrence

2012-04-16

Human balance during quiet standing is influenced by adding mass to the body with a backpack, with symmetrically-applied loads to the trunk, or with obesity. Adding mass to the body increases both the weight and inertia of the body, which theoretically could provide counteracting effects on body dynamics and balance. Understanding the independent effects of adding weight and inertia on balance may provide additional insight into human balance that could lead to novel advancements in balance training and rehabilitation. Therefore, the purpose of this study was to investigate the independent effects of adding weight and inertia on balance during quiet standing. Sixteen normal-weight young adult participants stood as still as possible on a custom-built backboard apparatus under four experimental conditions: baseline, added inertia only, added weight only, and added inertia and weight. Adding inertia by itself had no measurable effect on center of pressure movement or backboard movement. Adding weight by itself increased center of pressure movement (indicated greater effort by the postural control system to stand as still as possible) and backboard movement (indicating a poorer ability of the body to stand as still as possible). Adding inertia and weight at the same time increased center of pressure movement but did not increase backboard movement compared to the baseline condition. Adding inertia and adding weight had different effects on balance. Adding inertia by itself had no effect on balance. Adding weight by itself had a negative effect on balance. When adding inertia and weight at the same time, the added inertia appeared to lessen (but did not eliminate) the negative effect of adding weight on balance. These results improve our fundamental understanding of how added mass influences human balance.

Moments of inertia of neutron stars

Energy Technology Data Exchange (ETDEWEB)

Greif, Svenja Kim; Hebeler, Kai; Schwenk, Achim [Institut fuer Kernphysik, Technische Universitaet Darmstadt (Germany); ExtreMe Matter Institute EMMI, GSI Helmholtzzentrum fuer Schwerionenforschung GmbH (Germany)

2016-07-01

Neutron stars are unique laboratories for matter at extreme conditions. While nuclear forces provide systematic constraints on properties of neutron-rich matter up to around nuclear saturation density, the composition of matter at high densities is still unknown. Recent precise observations of 2 M {sub CircleDot} neutron stars made it possible to derive systematic constraints on the equation of state at high densities and also neutron star radii. Further improvements of these constraints require the observation of even heavier neutron stars or a simultaneous measurement of mass and radius of a single neutron star. Since the precise measurement of neutron star radii is an inherently difficult problem, the observation of moment of inertia of neutron stars provides a promising alternative, since they can be measured by pulsar timing experiments. We present a theoretical framework that allows to calculate moments of inertia microscopically, we show results based on state of the art equations of state and illustrate how future measurements of moments of inertia allow to constrain the equation of state and other properties of neutron stars.

Factors associated with clinical inertia: an integrative review

Science.gov (United States)

Aujoulat, Isabelle; Jacquemin, Patricia; Rietzschel, Ernst; Scheen, André; Tréfois, Patrick; Wens, Johan; Darras, Elisabeth; Hermans, Michel P

2014-01-01

Failure to initiate or intensify therapy according to evidence-based guidelines is increasingly being acknowledged as a phenomenon that contributes to inadequate management of chronic conditions, and is referred to as clinical inertia. However, the number and complexity of factors associated with the clinical reasoning that underlies the decision-making processes in medicine calls for a critical examination of the consistency of the concept. Indeed, in the absence of information on and justification of treatment decisions that were made, clinical inertia may be only apparent, and actually reflect good clinical practice. This integrative review seeks to address the factors generally associated with clinical inaction, in order to better delineate the concept of true clinical inertia. PMID:24868181

A Vision/Inertia Integrated Positioning Method Using Position and Orientation Matching

Directory of Open Access Journals (Sweden)

Xiaoyue Zhang

2017-01-01

Full Text Available A vision/inertia integrated positioning method using position and orientation matching which can be adopted on intelligent vehicle such as automated guided vehicle (AGV and mobile robot is proposed in this work. The method is introduced firstly. Landmarks are placed into the navigation field and camera and inertial measurement unit (IMU are installed on the vehicle. Vision processor calculates the azimuth and position information from the pictures which include artificial landmarks with the known direction and position. Inertial navigation system (INS calculates the azimuth and position of vehicle in real time and the calculated pixel position of landmark can be computed from the INS output position. Then the needed mathematical models are established and integrated navigation is implemented by Kalman filter with the observation of azimuth and the calculated pixel position of landmark. Navigation errors and IMU errors are estimated and compensated in real time so that high precision navigation results can be got. Finally, simulation and test are performed, respectively. Both simulation and test results prove that this vision/inertia integrated positioning method using position and orientation matching has feasibility and it can achieve centimeter-level autonomic continuous navigation.

Distributed Power System Virtual Inertia Implemented by Grid-Connected Power Converters

DEFF Research Database (Denmark)

Fang, Jingyang; Li, Hongchang; Tang, Yi

2018-01-01

Renewable energy sources (RESs), e.g. wind and solar photovoltaics, have been increasingly used to meet worldwide growing energy demands and reduce greenhouse gas emissions. However, RESs are normally coupled to the power grid through fast-response power converters without any inertia, leading...... to decreased power system inertia. As a result, the grid frequency may easily go beyond the acceptable range under severe frequency events, resulting in undesirable load-shedding, cascading failures, or even large-scale blackouts. To address the ever-decreasing inertia issue, this paper proposes the concept...... of distributed power system virtual inertia, which can be implemented by grid-connected power converters. Without modifications of system hardware, power system inertia can be emulated by the energy stored in the dc-link capacitors of grid-connected power converters. By regulating the dc-link voltages...

Semiclassical shell structure of moments of inertia in deformed Fermi systems

International Nuclear Information System (INIS)

Magner, A.G.; Gzhebinsky, A.M.; Sitdikov, A.S.; Khamzin, A.A.; Bartel, J.

2010-01-01

The collective moment of inertia is derived analytically within the cranking model in the adiabatic mean-field approximation at finite temperature. Using the nonperturbative periodic-orbit theory the semiclassical shell-structure components of the collective moment of inertia are obtained for any potential well. Their relation to the free-energy shell corrections are found semiclassically as being given through the shell-structure components of the rigid-body moment of inertia of the statistically equilibrium rotation in terms of short periodic orbits. Shell effects in the moment of inertia disappear exponentially with increasing temperature. For the case of the harmonic-oscillator potential one observes a perfect agreement between semiclassical and quantum shell-structure components of the free energy and the moment of inertia for several critical bifurcation deformations and several temperatures. (author)

Factors associated with therapeutic inertia in hypertension: validation of a predictive model.

Science.gov (United States)

Redón, Josep; Coca, Antonio; Lázaro, Pablo; Aguilar, Ma Dolores; Cabañas, Mercedes; Gil, Natividad; Sánchez-Zamorano, Miguel Angel; Aranda, Pedro

2010-08-01

To study factors associated with therapeutic inertia in treating hypertension and to develop a predictive model to estimate the probability of therapeutic inertia in a given medical consultation, based on variables related to the consultation, patient, physician, clinical characteristics, and level of care. National, multicentre, observational, cross-sectional study in primary care and specialist (hospital) physicians who each completed a questionnaire on therapeutic inertia, provided professional data and collected clinical data on four patients. Therapeutic inertia was defined as a consultation in which treatment change was indicated (i.e., SBP >or= 140 or DBP >or= 90 mmHg in all patients; SBP >or= 130 or DBP >or= 80 in patients with diabetes or stroke), but did not occur. A predictive model was constructed and validated according to the factors associated with therapeutic inertia. Data were collected on 2595 patients and 13,792 visits. Therapeutic inertia occurred in 7546 (75%) of the 10,041 consultations in which treatment change was indicated. Factors associated with therapeutic inertia were primary care setting, male sex, older age, SPB and/or DBP values close to normal, treatment with more than one antihypertensive drug, treatment with an ARB II, and more than six visits/year. Physician characteristics did not weigh heavily in the association. The predictive model was valid internally and externally, with acceptable calibration, discrimination and reproducibility, and explained one-third of the variability in therapeutic inertia. Although therapeutic inertia is frequent in the management of hypertension, the factors explaining it are not completely clear. Whereas some aspects of the consultations were associated with therapeutic inertia, physician characteristics were not a decisive factor.

On the moment of inertia of a proto neutron star

International Nuclear Information System (INIS)

Zhao Xianfeng; Zhang Hua; Jia Huanyu

2010-01-01

The influences of σ * and Φ mesons,temperature and coupling constants of nucleons on the moment of inertia of the proto neutron star (PNS) are examined in the framework of relativistic mean field theory for the baryon octet {n, p, Λ , Σ - , Σ 0 , Σ + , Ξ - , Ξ 0 } system. It is found that, compared with that without considering σ * and Φ mesons, the moment of inertia decreases. It is also found that the higher the temperature, the larger the incompressibility and symmetry energy coefficient, and the larger the moment of inertia of a PNS. The influence of temperature and coupling constants of the nucleons on the moment of inertia of a PNS is larger than that of the σ * and Φ mesons. (authors)

On the moment of inertia of a quantum harmonic oscillator

International Nuclear Information System (INIS)

Khamzin, A. A.; Sitdikov, A. S.; Nikitin, A. S.; Roganov, D. A.

2013-01-01

An original method for calculating the moment of inertia of the collective rotation of a nucleus on the basis of the cranking model with the harmonic-oscillator Hamiltonian at arbitrary frequencies of rotation and finite temperature is proposed. In the adiabatic limit, an oscillating chemical-potential dependence of the moment of inertia is obtained by means of analytic calculations. The oscillations of the moment of inertia become more pronounced as deformations approach the spherical limit and decrease exponentially with increasing temperature.

Two-fluid turbulence including electron inertia

Energy Technology Data Exchange (ETDEWEB)

Andrés, Nahuel, E-mail: nandres@iafe.uba.ar; Gómez, Daniel [Instituto de Astronomía y Física del Espacio, CC. 67, suc. 28, 1428 Buenos Aires (Argentina); Departamento de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Pabellón I, 1428 Buenos Aires (Argentina); Gonzalez, Carlos; Martin, Luis; Dmitruk, Pablo [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires and IFIBA, CONICET, 1428 Buenos Aires (Argentina)

2014-12-15

We present a full two-fluid magnetohydrodynamic (MHD) description for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure, and electron inertia. According to this description, each plasma species introduces a new spatial scale: the ion inertial length λ{sub i} and the electron inertial length λ{sub e}, which are not present in the traditional MHD description. In the present paper, we seek for possible changes in the energy power spectrum in fully developed turbulent regimes, using numerical simulations of the two-fluid equations in two-and-a-half dimensions. We have been able to reproduce different scaling laws in different spectral ranges, as it has been observed in the solar wind for the magnetic energy spectrum. At the smallest wavenumbers where plain MHD is valid, we obtain an inertial range following a Kolmogorov k{sup −5∕3} law. For intermediate wavenumbers such that λ{sub i}{sup −1}≪k≪λ{sub e}{sup −1}, the spectrum is modified to a k{sup −7∕3} power-law, as has also been obtained for Hall-MHD neglecting electron inertia terms. When electron inertia is retained, a new spectral region given by k>λ{sub e}{sup −1} arises. The power spectrum for magnetic energy in this region is given by a k{sup −11∕3} power law. Finally, when the terms of electron inertia are retained, we study the self-consistent electric field. Our results are discussed and compared with those obtained in the solar wind observations and previous simulations.

Particle number fluctuations in the moment of inertia

International Nuclear Information System (INIS)

Allal, N.H.; Fellah, M.

1991-01-01

The nonphysical effects due to the false components introduced by the nonconservation of the particle number in the BCS states are eliminated in the theoretical values of the moment of inertia calculated by the microscopic cranking model. The states of the system are obtained by successive projections of the BCS states in the occupation number space. The moment of inertia appears then as a limit of a rapidly convergent sequence. The errors due to this false component have been numerically estimated and appear to be important both in the BCS states and in the matrix elements of the angular momentum. The predicted values of the moment of inertia satisfactorily reproduce the experimental data over a large number of nuclei within rare-earth and actinide regions with discrepancies ranging from 0.1% to 8%

On the moment of inertia and surface redshift of neutron star

International Nuclear Information System (INIS)

Li Wenfei; Zhang Fengshou; Chen Liewen

2001-01-01

Using temperature, density and isospin dependent nuclear equation of state, the authors calculated the moment of inertia and surface redshift of neutron star by resolving Tolman-Oppenheimer-Volkoff equation. It is found that the moment of inertia and surface redshift strongly depend on the nuclear equation of state. The equation of state with high value of un-compressibility and symmetry energy strength coefficient provides a big moment of inertia, while effective mass of nucleon has almost no effect on moment of inertia. Meanwhile, the equation of state with high value of un-compressibility and effective mass of nucleon provides a big surface redshift, while the symmetry energy strength coefficient has almost no effect on surface redshift of neutron star. The relationship between moment of inertia and mass is also given. By comparing the calculated results with the one obtained semi-empirically from astronomy, the authors find that a softer equation of state can provide a more reasonable result

Impact of clinical inertia on cardiovascular risk factors in patients with diabetes.

Science.gov (United States)

Whitford, David L; Al-Anjawi, Hussam A; Al-Baharna, Marwa M

2014-07-01

To determine whether clinical inertia is associated with simpler interventions occurring more often than complex changes and the association between clinical inertia and outcomes. Prevalence of clinical inertia over a 30 month period for hyperglycaemia, hypertension and dyslipidaemia was calculated in a random sample (n=334) of patients attending a diabetes clinic. Comparisons between prevalence of clinical inertia and outcomes for each condition were examined using parametric tests of association. There was less clinical inertia in hyperglycaemia (29% of consultations) compared with LDL (80% of consultations) and systolic BP (68% of consultations). Consultations where therapy was intensified had a greater reduction in risk factor levels than when no change was made. No association was found between treatment intensity scores and changes in HbA1c, LDL or blood pressure over 30 months. Physicians are no more likely to intervene in conditions where simple therapeutic changes are necessary as opposed to complex changes. Greater clinical inertia leads to poorer outcomes. There continues to be substantial clinical inertia in routine clinical practice. Physicians should adopt a holistic approach to cardiovascular risk reduction in patients with diabetes, adhere more closely to established management guidelines and emphasize personal individualized target setting. Copyright © 2013 Primary Care Diabetes Europe. Published by Elsevier Ltd. All rights reserved.

Semiclassical moment of inertia shell-structure within the phase-space approach

International Nuclear Information System (INIS)

Gorpinchenko, D V; Magner, A G; Bartel, J; Blocki, J P

2015-01-01

The moment of inertia for nuclear collective rotations is derived within a semiclassical approach based on the cranking model and the Strutinsky shell-correction method by using the non-perturbative periodic-orbit theory in the phase-space variables. This moment of inertia for adiabatic (statistical-equilibrium) rotations can be approximated by the generalized rigid-body moment of inertia accounting for the shell corrections of the particle density. A semiclassical phase-space trace formula allows us to express the shell components of the moment of inertia quite accurately in terms of the free-energy shell corrections for integrable and partially chaotic Fermi systems, which is in good agreement with the corresponding quantum calculations. (paper)

Family physician clinical inertia in glycemic control among patients with type 2 diabetes.

Science.gov (United States)

Bralić Lang, Valerija; Bergman Marković, Biserka; Kranjčević, Ksenija

2015-02-05

Many patients with diabetes do not achieve target values. One of the reasons for this is clinical inertia. The correct explanation of clinical inertia requires a conjunction of patient with physician and health care system factors. Our aim was to determine the rate of clinical inertia in treating diabetes in primary care and association of patient, physician, and health care setting factors with clinical inertia. This was a national, multicenter, observational, cross-sectional study in primary care in Croatia. Each family physician (FP) provided professional data and collected clinical data on 15-25 type 2 diabetes (T2DM) patients. Clinical inertia was defined as a consultation in which treatment change based on glycated hemoglobin (HbA1c) levels was indicated but did not occur. A total of 449 FPs (response rate 89.8%) collected data on 10275 patients. Mean clinical inertia per FP was 55.6% (SD ±26.17) of consultations. All of the FPs were clinically inert with some patients, and 9% of the FPs were clinically inert with all patients. The main factors associated with clinical inertia were: higher percentage of HbA1c, oral anti-diabetic drug initiated by diabetologist, increased postprandial glycemia and total cholesterol, physical inactivity of patient, and administration of drugs other than oral antidiabetics. Clinical inertia in treating patients with T2DM is a serious problem. Patients with worse glycemic control and those whose therapy was initiated by a diabetologist experience more clinical inertia. More research on causes of clinical inertia in treating patients with T2DM should be conducted to help achieve more effective diabetes control.

Moments of Inertia of Disks and Spheres without Integration

Science.gov (United States)

Hong, Seok-Cheol; Hong, Seok-In

2013-01-01

Calculation of moments of inertia is often challenging for introductory-level physics students due to the use of integration, especially in non-Cartesian coordinates. Methods that do not employ calculus have been described for finding the rotational inertia of thin rods and other simple bodies. In this paper we use the parallel axis theorem and…

Emotional inertia and external events: The roles of exposure, reactivity, and recovery.

Science.gov (United States)

Koval, Peter; Brose, Annette; Pe, Madeline L; Houben, Marlies; Erbas, Yasemin; Champagne, Dominique; Kuppens, Peter

2015-10-01

Increased moment-to-moment predictability, or inertia, of negative affect has been identified as an important dynamic marker of psychological maladjustment, and increased vulnerability to depression in particular. However, little is known about the processes underlying emotional inertia. The current article examines how the emotional context, and people's responses to it, are related to emotional inertia. We investigated how individual differences in the inertia of negative affect (NA) are related to individual differences in exposure, reactivity, and recovery from emotional events, in daily life (assessed using experience sampling) as well as in the lab (assessed using an emotional film-clip task), among 200 participants commencing their first year of tertiary education. This dual-method approach allowed us to assess affective responding on different timescales, and in response to standardized as well as idiographic emotional stimuli. Our most consistent finding, across both methods, was that heightened NA inertia is related to decreased NA recovery following negative stimuli, suggesting that higher levels of inertia may be mostly driven by impairments in affect repair following negative events. (c) 2015 APA, all rights reserved).

DOES CLINICAL INERTIA VARY BY PERSONALIZED A1C GOAL? A STUDY OF PREDICTORS AND PREVALENCE OF CLINICAL INERTIA IN A U.S. MANAGED-CARE SETTING.

Science.gov (United States)

Lin, Jay; Zhou, Steve; Wei, Wenhui; Pan, Chunshen; Lingohr-Smith, Melissa; Levin, Philip

2016-02-01

Clinical inertia is defined as failure to initiate or intensify therapy despite an inadequate treatment response. We assessed the prevalence and identified the predictors of clinical inertia among patients with type 2 diabetes (T2DM) based on personalized goals. Three hemoglobin A1c (A1C) targets (American Diabetes Association A1C inertia was defined as no intensification of treatment during the response period. Demographic and clinical characteristics were analyzed to identify predictors of treatment intensification. Irrespective of A1C target, the majority of patients with T2DM (70.4 to 72.8%) experienced clinical inertia in the 6 months following the index event, with 5.3 to 6.2% of patients intensifying treatment with insulin. Patients with a lower likelihood of intensification were older, used >1 oral antidiabetes drug during the baseline period, and had an above-target A1C more recently. Treatment intensification was associated with patients who had point-of-service insurance, mental illness, an endocrinologist visit in the baseline period, or higher index A1C. The prevalence of clinical inertia among patients with T2DM in a U.S. managed-care setting is high and has increased over more recent years. Factors predicting increased risk of clinical inertia may help identify "at-risk" populations and assist in developing strategies to improve their management.

Predicting superdeformed rotational band-head spin in A ∼ 190 mass region using variable moment of inertia model

International Nuclear Information System (INIS)

Uma, V.S.; Goel, Alpana; Yadav, Archana; Jain, A.K.

2016-01-01

The band-head spin (I 0 ) of superdeformed (SD) rotational bands in A ∼ 190 mass region is predicted using the variable moment of inertia (VMI) model for 66 SD rotational bands. The superdeformed rotational bands exhibited considerably good rotational property and rigid behaviour. The transition energies were dependent on the prescribed band-head spins. The ratio of transition energies over spin Eγ/ 2 I (RTEOS) vs. angular momentum (I) have confirmed the rigid behaviour, provided the band-head spin value is assigned correctly. There is a good agreement between the calculated and the observed transition energies. This method gives a very comprehensive interpretation for spin assignment of SD rotational bands which could help in designing future experiments for SD bands. (author)

40 CFR 86.529-98 - Road load force and inertia weight determination.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load force and inertia weight... inertia weight determination. (a)(1) Road load as a function of speed is given by the following equation: F = A + CV2 (2) The values for coefficients A and C and the test inertia are given in Figure F98-9...

Clinical Inertia and Outpatient Medical Errors

National Research Council Canada - National Science Library

O'Connor, Patrick J; Sperl-Hillen, JoAnn M; Johnson, Paul E; Rush, William A; Biltz, George

2005-01-01

.... Clinical inertia is a major factor that contributes to inadequate chronic disease care in patients with diabetes mellitus, hypertension, dyslipidemias, depression, coronary heart disease, and other conditions...

Exploring inertia in a typical state organisation

Directory of Open Access Journals (Sweden)

G. J. Louw

2004-10-01

Full Text Available Those organisations which do not change according to environmental pressures, suffer from organisational inertia. The purpose of this study is to explore the manifestation of organisational inertia in the target organisation. The target population for this study was a group of trainees, representing the geographic and demographic levels of a particular state department. In South Africa, surveys of this nature were only executed in the corporate sector. The results indicate that organisational inertia is a phenomenon that affects both corporate and governmental organisations. Opsomming Organisasies wat nie ooreenkomstig omgewingsdruk verander nie, ly aan organisasietraagheid. Die doel van die studie is om organisasietraagheid te konseptualiseer en die manifestasie daarvan in die teikenorganisasie te ondersoek. Die teikenpopulasie bestaan uit ’n groep kursusgangers wat die demografiese en geografiese samestelling van ‘n tipiese staatsdepartement verteenwoordig. In Suid -Afrika is navorsing van hierdie aard nog net in die korporatiewe sektor uitgevoer. Die resultate toon aan dat organisasietraagheid ‘n faktor is wat beide die korporatiewe omgewing en staatsorganisasies beïnvloed.

Development of ABWR inertia-increased reactor internal pump and thicker sleeve nozzle

International Nuclear Information System (INIS)

Takahashi, Shirou; Shiina, Kouji; Matsumura, Seiichi

2002-01-01

The conventional reactor internal pumps (RIPs) in the ABWR have an inertia moment coming from the shafts and Motor-Generator sets, enabling the RIPs to continue running for a few seconds, when a trip of all RIPs event occurs. It is possible to simplify the RIPs' power supply system without affecting the core flow supply when the above event occurs by eliminating M-G sets, if the rotating inertia is increased. This inertia increase due to an additional flywheel, which leads to gains in weight and length, requires the larger diameter nozzle with the thicker sleeve. However, too large a nozzle diameter may change the hydraulic performance. In authors' previous study, the optimum nozzle diameter (492 mm) was selected through 1/5-scale test. In this study, the 492 mm nozzle and the inertia-increased RIP were verified through the full-scale tests. The rotating inertia time constant on coastdown characteristics (behavior of the RIP speed in the event of power loss) for the inertia-increased RIP doubled compared with the current RIP. The casing and the shaft vibration were also confirmed to satisfy the design criteria. Moreover, hydraulic performance and heat increase in the motor casing due to the flywheel were evaluated. The inertia increased RIP with the 492 mm nozzle maintained good performance. (author)

Nuclear moments of inertia at high spins

International Nuclear Information System (INIS)

Deleplanque, M.A.

1984-01-01

For nuclei in high spin states a yrast-like part of a continuum γ-ray spectrum shows naturally how angular momentum is generated as a function of frequency. In rotational nuclei, the rotational frequency is omega = dE/dI approx. E/sub γ/2, half the collective E2 transition energy. The height of the spectrum for a rotor is proportional to dN/dE/sub γ/ = dI/4d omega. dI/d omega is a dynamic (second derivative of energy with spin) moment of inertia. It contains both alignments and collective effects and is therefore an effective moment of inertia J/sub eff//sup (2)/. It shows how much angular momentum is generated at each frequency. If the collective moment of inertia J/sub band//sup (2)/(omega) is measured (from γ-γ correlation experiments) for the same system, the collective and aligned (Δi) contributions to the increase of angular momentum ΔI in a frequency interval Δ omega can be separated: Δi/ΔI = 1 - J/sub band//sup (2)//J/sub eff//sup (2)/. This is at present the only way to extract such detailed information at the highest spin states where discrete lines cannot be resolved. An example of the spectra obtained in several Er nuclei is shown. They are plotted in units of the moment of inertia J/sub eff//sup (2)/. The high-energy part of the spectra has been corrected for incomplete feeding at these frequencies

WAYS TO MANAGE HEATING INERTIA

Directory of Open Access Journals (Sweden)

E. V. Biloshytskyi

2017-08-01

Full Text Available Purpose. The research paper proposes to estimate the effect of heat inertia of the water heating system, in transient operation modes, on the temperature condition in the passenger car, as well as to offer technical solutions intended to reduce the heating system inertia effect and to maintain a stable temperature condition in the passenger car premises in transitional modes of the heating system. Methodology. The author developed the method for controlling the heat transfer of heating system pipes with the help of regulating casing. To control the heating system and the heat transfer of heating pipes, two types of temperature control sensors were used in the passenger car: certain sensors interacted with regulatory casings, while the others interacted with high-voltage tubular heating element control devices. To assess the efficiency of heat interchange regulation of heating pipes and the heating system control, with installed regulating casings, the operation of the heating system with regulating casings and two types of sensors was mathematically modelled. Mathematical modelling used the experimental test data. The results of experimental tests and mathematical modelling were compared. Findings. Currently in operated passenger cars, control of heating appliances is not constructively provided. Automatic maintenance of the set temperature in a passenger car is limited to switching on and off of high-voltage tubular heating elements. The use of regulating casings on heating pipes allows reducing the effects of heat inertia and maintaining stable thermal conditions in a passenger car, using the heating system as a heat accumulator, and also provides the opportunity to realize an individual control of air temperature in the compartment. Originality. For the first time, the paper studied the alternative ways of regulating the temperature condition in a passenger car. Using of the heating system as a heat accumulator. Practical value. The

Temperature-dependent particle-number projected moment of inertia

International Nuclear Information System (INIS)

Allal, N. H.; Fellah, M.; Benhamouda, N.; Oudih, M. R.

2008-01-01

Expressions of the parallel and perpendicular temperature-dependent particle-number projected nuclear moment of inertia have been established by means of a discrete projection method. They generalize that of the FTBCS method and are well adapted to numerical computation. The effects of particle-number fluctuations have been numerically studied for some even-even actinide nuclei by using the single-particle energies and eigenstates of a deformed Woods-Saxon mean field. It has been shown that the parallel moment of inertia is practically not modified by the use of the projection method. In contrast, the discrepancy between the projected and FTBCS perpendicular moment of inertia values may reach 5%. Moreover, the particle-number fluctuation effects vary not only as a function of the temperature but also as a function of the deformation for a given temperature. This is not the case for the system energy

Electron inertia effects on the planar plasma sheath problem

International Nuclear Information System (INIS)

Duarte, V. N.; Clemente, R. A.

2011-01-01

The steady one-dimensional planar plasma sheath problem, originally considered by Tonks and Langmuir, is revisited. Assuming continuously generated free-falling ions and isothermal electrons and taking into account electron inertia, it is possible to describe the problem in terms of three coupled integro-differential equations that can be numerically integrated. The inclusion of electron inertia in the model allows us to obtain the value of the plasma floating potential as resulting from an electron density discontinuity at the walls, where the electrons attain sound velocity and the electric potential is continuous. Results from numerical computation are presented in terms of plots for densities, electric potential, and particles velocities. Comparison with results from literature, corresponding to electron Maxwell-Boltzmann distribution (neglecting electron inertia), is also shown.

The effect of directional inertias added to pelvis and ankle on gait

Science.gov (United States)

2013-01-01

Background Gait training robots should display a minimum added inertia in order to allow normal walking. The effect of inertias in specific directions is yet unknown. We set up two experiments to assess the effect of inertia in anteroposterior (AP) direction to the ankle and AP and mediolateral (ML) direction to the pelvis. Methods We developed an experimental setup to apply inertia in forward backward and or sideways directions. In two experiments nine healthy subjects walked on a treadmill at 1.5 km/h and 4.5 km/h with no load and with AP loads of 0.3, 1.55 and 3.5 kg to the left ankle in the first experiment and combinations of AP and ML loads on the pelvis (AP loads 0.7, 4.3 and 10.2 kg; ML loads 0.6, 2.3 and 5.3 kg). We recorded metabolic rate, EMG of major leg muscles, gait parameters and kinematics. Results & discussion Adding 1.55 kg or more inertia to the ankle in AP direction increases the pelvis acceleration and decreases the foot acceleration in AP direction both at speeds of 4.5 km/h. Adding 3.5 kg of inertia to the ankle also increases the swing time as well as AP motions of the pelvis and head-arms-trunk (HAT) segment. Muscle activity remains largely unchanged. Adding 10.2 kg of inertia to the pelvis in AP direction causes a significant decrease of the pelvis and HAT segment motions, particularly at high speeds. Also the sagittal back flexion increases. Lower values of AP inertia and ML inertias up to 5.3 kg had negligible effect. In general the found effects are larger at high speeds. Conclusions We found that inertia up to 2 kg at the ankle or 6 kg added to the pelvis induced significant changes, but since these changes were all within the normal inter subject variability we considered these changes as negligible for application as rehabilitation robotics and assistive devices. PMID:23597391

Studies of the nuclear inertia in fission and heavy-ion reactions

International Nuclear Information System (INIS)

Moeller, P.; Nix, J.R.

1978-01-01

On the basis of the non-self-consistent cranking model the authors study some aspects of the nuclear inertia of interest in fission and heavy-ion reactions. First, the authors consider in the adiabatic limit the inertia for a doubly closed-shell nucleus in a deformed spheroidal harmonic-oscillator single-particle potential plus a small perturbation. When expressed in terms of a coordinate that describes the deformation of the nuclear matter distribution, the inertia for small oscillations about a spherical shape is exactly equal to the incompressible, irrotational value. For large distortions it deviates from the incompressible, irrotational value by up to about +-1% away from level crossings. Second, in order to study the dependence of the inertia upon a level crossing, two levels of the above system are considered. This is done both in the adiabatic limit and for large collective velocities. At level crossings the adiabatic inertia relative to the deformation of the matter distribution diverges as 1/modΔV, where modΔV is the magnitude of the perturbation. However, for large collective velocities the contribution to the inertia from a level crossing is less than 4modΔV(d(rsub(m))/dt) 2 where d(rsub(m))/dt is the collective velocity of the matter distribution. Although the effect of large velocities on the remaining levels of the many-body system or the effect of a statistical ensemble of states has not been considered, some of the results suggest that for high excitation energies and moderately large collective velocities the nuclear inertia approaches approximately the irrotational value. (Auth.)

Emergency Entry with One Control Torque: Non-Axisymmetric Diagonal Inertia Matrix

Science.gov (United States)

Llama, Eduardo Garcia

2011-01-01

In another work, a method was presented, primarily conceived as an emergency backup system, that addressed the problem of a space capsule that needed to execute a safe atmospheric entry from an arbitrary initial attitude and angular rate in the absence of nominal control capability. The proposed concept permits the arrest of a tumbling motion, orientation to the heat shield forward position and the attainment of a ballistic roll rate of a rigid spacecraft with the use of control in one axis only. To show the feasibility of such concept, the technique of single input single output (SISO) feedback linearization using the Lie derivative method was employed and the problem was solved for different number of jets and for different configurations of the inertia matrix: the axisymmetric inertia matrix (I(sub xx) > I(sub yy) = I(sub zz)), a partially complete inertia matrix with I(sub xx) > I(sub yy) > I(sub zz), I(sub xz) not = 0 and a realistic complete inertia matrix with I(sub xx) > I(sub yy) > I)sub zz), I(sub ij) not= 0. The closed loop stability of the proposed non-linear control on the total angle of attack, Theta, was analyzed through the zero dynamics of the internal dynamics for the case where the inertia matrix is axisymmetric (I(sub xx) > I(sub yy) = I(sub zz)). This note focuses on the problem of the diagonal non-axisymmetric inertia matrix (I(sub xx) > I(sub yy) > I(sub zz)), which is half way between the axisymmetric and the partially complete inertia matrices. In this note, the control law for this type of inertia matrix will be determined and its closed-loop stability will be analyzed using the same methods that were used in the other work. In particular, it will be proven that the control system is stable in closed-loop when the actuators only provide a roll torque.

Coupling diffusion and maximum entropy models to estimate thermal inertia

Science.gov (United States)

Thermal inertia is a physical property of soil at the land surface related to water content. We have developed a method for estimating soil thermal inertia using two daily measurements of surface temperature, to capture the diurnal range, and diurnal time series of net radiation and specific humidi...

Effectiveness and clinical inertia in patients with antidiabetic therapy.

Science.gov (United States)

Machado-Duque, Manuel Enrique; Ramírez-Riveros, Adriana Carolina; Machado-Alba, Jorge Enrique

2017-06-01

To establish the effectiveness of antidiabetic therapy and the frequency of clinical inertia in the management of type 2 diabetes mellitus in Colombia. A cross-sectional study with follow-up of patients who had been treated for at least 1 year and were receiving medical consultation for antidiabetic treatment. Effectiveness was established when haemoglobin-A1c levels were inertia was reached, which was defined as no therapeutic modifications despite not achieving management controls. Sociodemographic, clinical and pharmacological variables were evaluated, and multivariate analyses were performed. In total, 363 patients with type 2 diabetes mellitus were evaluated, with a mean age of 62.0±12.2 years. A total of 1,016 consultations were evaluated, and the therapy was effective at the end of the follow-up in 57.9% of cases. Clinical inertia was found in 56.8% of patients who did not have metabolic control. The most frequently prescribed medications were metformin (84.0%), glibenclamide (23.4%) and insulin glargine (20.7%). Moreover, 57.6% of the patients were treated with two or more antidiabetic medications. Having metabolic control in the first consult of the follow-up was a protective factor against clinical inertia in the subsequent consultations (OR: 0.08; 95%CI: 0.04-0.15; Pinertia was identifiable and quantifiable and found in similar proportions to other countries. Clinical inertia is a relevant condition given that it interferes with the possibility of controlling this pathology. © 2017 John Wiley & Sons Ltd.

Moments of inertia for solids of revolution and variational methods

International Nuclear Information System (INIS)

Diaz, Rodolfo A; Herrera, William J; Martinez, R

2006-01-01

We present some formulae for the moments of inertia of homogeneous solids of revolution in terms of the functions that generate the solids. The development of these expressions exploits the cylindrical symmetry of these objects and avoids the explicit use of multiple integration, providing an easy and pedagogical approach. The explicit use of the functions that generate the solid gives the possibility of writing the moment of inertia as a functional, which in turn allows us to utilize the calculus of variations to obtain new insight into some properties of this fundamental quantity. In particular, minimization of moments of inertia under certain restrictions is possible by using variational methods

Inertia of rough and vicinal surfaces of helium-4 crystals

International Nuclear Information System (INIS)

Amrit, J.; Legros, P.; Poitrenaud, J.

1995-01-01

This paper reports a study of the inertia of rough and vicinal of 4 He crystals. We have measured the transmission coefficient of ultrasonic waves at frequencies 10, 30, 50 and 70 MHz, across the liquid-solid interface. The experiments are carried out at temperatures ranging between 0.4 and 1.0 K for four crystallographic orientations. Two important phenomena are put to evidence for the first time. We have found the first experimental evidence that the inertia of rough surfaces depends on temperature. For vicinal surfaces, we have shown the strong increase of the inertia as the tilt angle decreases. Our experimental results agree very well with the theoretical predictions

Moment of inertia of liquid in a tank

Directory of Open Access Journals (Sweden)

Lee Gyeong Joong

2014-03-01

Full Text Available In this study, the inertial properties of fully filled liquid in a tank were studied based on the potential theory. The analytic solution was obtained for the rectangular tank, and the numerical solutions using Green’s 2nd identity were obtained for other shapes. The inertia of liquid behaves like solid in recti-linear acceleration. But under rotational acceleration, the moment of inertia of liquid becomes small compared to that of solid. The shapes of tank investigated in this study were ellipse, rectangle, hexagon, and octagon with various aspect ratios. The numerical solu¬tions were compared with analytic solution, and an ad hoc semi-analytical approximate formula is proposed herein and this formula gives very good predictions for the moment of inertia of the liquid in a tank of several different geometrical shapes. The results of this study will be useful in analyzing of the motion of LNG/LPG tanker, liquid cargo ship, and damaged ship.

Moment of inertia of liquid in a tank

Directory of Open Access Journals (Sweden)

Gyeong Joong Lee

2014-03-01

Full Text Available In this study, the inertial properties of fully filled liquid in a tank were studied based on the potential theory. The analytic solution was obtained for the rectangular tank, and the numerical solutions using Green's 2nd identity were obtained for other shapes. The inertia of liquid behaves like solid in recti-linear acceleration. But under rotational acceleration, the moment of inertia of liquid becomes small compared to that of solid. The shapes of tank investigated in this study were ellipse, rectangle, hexagon, and octagon with various aspect ratios. The numerical solutions were compared with analytic solution, and an ad hoc semi-analytical approximate formula is proposed herein and this formula gives very good predictions for the moment of inertia of the liquid in a tank of several different geometrical shapes. The results of this study will be useful in analyzing of the motion of LNG/LPG tanker, liquid cargo ship, and damaged ship.

Moments of inertia in 162Yb at very high spins

International Nuclear Information System (INIS)

Simon, R.S.; Banaschik, M.V.; Colombani, P.; Soroka, D.P.; Stephens, F.S.; Diamond, R.M.

1976-01-01

Two methods have been used to obtain values of the effective moment of inertia of very-high-spin (20h-bar--50h-bar) states populated in heavy-ion compound-nucleus reactions. The 162 Yb nucleus studied has effective moments of inertia smaller than, but approaching, the rigid-body estimate

Orientational dynamics of a triaxial ellipsoid in simple shear flow: Influence of inertia.

Science.gov (United States)

Rosén, Tomas; Kotsubo, Yusuke; Aidun, Cyrus K; Do-Quang, Minh; Lundell, Fredrik

2017-07-01

The motion of a single ellipsoidal particle in simple shear flow can provide valuable insights toward understanding suspension flows with nonspherical particles. Previously, extensive studies have been performed on the ellipsoidal particle with rotational symmetry, a so-called spheroid. The nearly prolate ellipsoid (one major and two minor axes of almost equal size) is known to perform quasiperiodic or even chaotic orbits in the absence of inertia. With small particle inertia, the particle is also known to drift toward this irregular motion. However, it is not previously understood what effects from fluid inertia could be, which is of highest importance for particles close to neutral buoyancy. Here, we find that fluid inertia is acting strongly to suppress the chaotic motion and only very weak fluid inertia is sufficient to stabilize a rotation around the middle axis. The mechanism responsible for this transition is believed to be centrifugal forces acting on fluid, which is dragged along with the rotational motion of the particle. With moderate fluid inertia, it is found that nearly prolate triaxial particles behave similarly to the perfectly spheroidal particles. Finally, we also are able to provide predictions about the stable rotational states for the general triaxial ellipsoid in simple shear with weak inertia.

Constraining the radius of neutron stars through the moment of inertia

International Nuclear Information System (INIS)

Greif, S.K.

2017-01-01

Neutron star observations provide systematic constraints on the nuclear equation of state like the recent discovery of 2 M neutron stars. While neutron star masses can be measured very precisely, their radii are inherently difficult to measure due to the influence from large systematic uncertainties. A promising alternative access to this information is the moment of inertia, which provides constraints for both radii and the equation of state. This will be possible in the future using pulsar timing observations. We present a theoretical framework for calculating moments of inertia microscopically. We use state-of-the-art equations of state that are based on chiral effective field theory interactions and fulfill the requirements of causality and of reproducing 2 M neutron stars. This allows us to generate a large set of equations of state that predict combinations of masses, radii, and moments of inertia. We investigate the impact of a moment of inertia measurement on the radius within this general setup. Based on our results, we show how future measurements of moments of inertia constrain radii of neutron stars and thus the equation of state. (author)

Inertia and ion Landau damping of low-frequency magnetohydrodynamical modes in tokamaks

International Nuclear Information System (INIS)

Bondeson, A.; Chu, M.S.

1996-01-01

The inertia and Landau damping of low-frequency magnetohydrodynamical modes are investigated using the drift-kinetic energy principle for the motion along the magnetic field. Toroidal trapping of the ions decreases the Landau damping and increases the inertia for frequencies below (r/R) 1/2 v thi /qR. The theory is applied to toroidicity-induced Alfvacute en eigenmodes and to resistive wall modes in rotating plasmas. An explanation of the beta-induced Alfvacute en eigenmode is given in terms of the Pfirsch endash Schlueter-like enhancement of inertia at low frequency. The toroidal inertia enhancement also increases the effects of plasma rotation on resistive wall modes. copyright 1996 American Institute of Physics

Particle Swarm Optimization with Various Inertia Weight Variants for Optimal Power Flow Solution

Directory of Open Access Journals (Sweden)

Prabha Umapathy

2010-01-01

Full Text Available This paper proposes an efficient method to solve the optimal power flow problem in power systems using Particle Swarm Optimization (PSO. The objective of the proposed method is to find the steady-state operating point which minimizes the fuel cost, while maintaining an acceptable system performance in terms of limits on generator power, line flow, and voltage. Three different inertia weights, a constant inertia weight (CIW, a time-varying inertia weight (TVIW, and global-local best inertia weight (GLbestIW, are considered with the particle swarm optimization algorithm to analyze the impact of inertia weight on the performance of PSO algorithm. The PSO algorithm is simulated for each of the method individually. It is observed that the PSO algorithm with the proposed inertia weight yields better results, both in terms of optimal solution and faster convergence. The proposed method has been tested on the standard IEEE 30 bus test system to prove its efficacy. The algorithm is computationally faster, in terms of the number of load flows executed, and provides better results than other heuristic techniques.

Effectiveness and clinical inertia in the management of hypertension in patients in Colombia.

Science.gov (United States)

Machado-Duque, Manuel Enrique; Ramírez-Valencia, Diana Marcela; Medina-Morales, Diego Alejandro; Machado-Alba, Jorge Enrique

2015-11-01

Determine the effectiveness of treatment and the frequency of clinical inertia in the management of hypertension in Colombian patients. A retrospective study with prospective follow-up of individuals on antihypertensive medication who were treated on medical consultation for 1 year was conducted in 20 Colombian cities. Clinical inertia was considered when no modification of therapy occurred despite not achieving control goals. A total of 355 hypertensive patients were included. From a total of 1142 consultations, therapy was effective in 81.7% of cases. In 18.3% of the cases, the control goal was not achieved, and of these, 81.8% were considered clinical inertia. A logistic regression showed that the use of antidiabetics (odds ratio: 2.31; 95% confidence interval: 1.290-4.167; P = .008) was statistically associated with an increased risk of clinical inertia. With a determination of the frequency of inertia and the high effectiveness of antihypertensive treatment, valuable information can be provided to understand the predictors of clinical inertia. Copyright © 2015 American Society of Hypertension. Published by Elsevier Inc. All rights reserved.

Acquisition of Inertia by a Moving Crack

Science.gov (United States)

Goldman, Tamar; Livne, Ariel; Fineberg, Jay

2010-03-01

We experimentally investigate the dynamics of “simple” tensile cracks. Within an effectively infinite medium, a crack’s dynamics perfectly correspond to inertialess behavior predicted by linear elastic fracture mechanics. Once a crack interacts with waves that it generated at earlier times, this description breaks down. Cracks then acquire inertia and sluggishly accelerate. Crack inertia increases with crack speed v and diverges as v approaches its limiting value. We show that these dynamics are in excellent accord with an equation of motion derived in the limit of an infinite strip [M. Marder, Phys. Rev. Lett. 66, 2484 (1991)PRLTAO0031-900710.1103/PhysRevLett.66.2484].

Nuclear moments of inertia at high spin

International Nuclear Information System (INIS)

Deleplanque, M.A.

1982-10-01

The competition between collective motion and alignment at high spin can be evaluated by measuring two complementary dynamic moments of inertia. The first, I band, measured in γ-γ correlation experiments, relates to the collective properties of the nucleus. A new moment of inertia I/sub eff/ is defined here, which contains both collective and alignment effects. Both of these can be measured in continuum γ-ray spectra of rotational nuclei up to high frequencies. The evolution of γ-ray spectra for Er nuclei from mass 160 to 154 shows that shell effects can directly be observed in the spectra of the lighter nuclei

Accounting for inertia in modal choices: some new evidence using a RP/SP dataset

DEFF Research Database (Denmark)

Cherchi, Elisabetta; Manca, Francesco

2011-01-01

effect is stable along the SP experiments. Inertia has been studied more extensively with panel datasets, but few investigations have used RP/SP datasets. In this paper we extend previous work in several ways. We test and compare several ways of measuring inertia, including measures that have been...... proposed for both short and long RP panel datasets. We also explore new measures of inertia to test for the effect of “learning” (in the sense of acquiring experience or getting more familiar with) along the SP experiment and we disentangle this effect from the pure inertia effect. A mixed logit model...... is used that allows us to account for both systematic and random taste variations in the inertia effect and for correlations among RP and SP observations. Finally we explore the relation between the utility specification (especially in the SP dataset) and the role of inertia in explaining current choices....

Time to wake up: reactive countermeasures to sleep inertia.

Science.gov (United States)

Hilditch, Cassie J; Dorrian, Jillian; Banks, Siobhan

2016-12-07

Sleep inertia is the period of impaired performance and grogginess experienced after waking. This period of impairment is of concern to workers who are on-call, or nap during work hours, and need to perform safety-critical tasks soon after waking. While several studies have investigated the best sleep timing and length to minimise sleep inertia effects, few have focused on countermeasures -especially those that can be implemented after waking (i.e. reactive countermeasures). This structured review summarises current literature on reactive countermeasures to sleep inertia such as caffeine, light, and temperature and discusses evidence for the effectiveness and operational viability of each approach. Current literature does not provide a convincing evidence-base for a reactive countermeasure. Caffeine is perhaps the best option, although it is most effective when administered prior to sleep and is therefore not strictly reactive. Investigations into light and temperature have found promising results for improving subjective alertness; further research is needed to determine whether these countermeasures can also attenuate performance impairment. Future research in this area would benefit from study design features highlighted in this review. In the meantime, it is recommended that proactive sleep inertia countermeasures are used, and that safety-critical tasks are avoided immediately after waking.

Thermal inertia mapping of Mars from 60°S to 60°N

Science.gov (United States)

Palluconi, Frank Don; Kieffer, Hugh H.

1981-01-01

Twenty-micrometer brightness temperatures are used to derive the thermal inertia for 81% of the Martian surface between latitudes ±60°. These data were acquired by the two Viking Infrared Thermal Mappers in 1977 and 1978 following the two global dust storms of 1977. The spatial resolution used is 2° in latitude by 2° in longitude and the total range in derived inertia is . The distribution of thermal inertia is strongly bimodal with all values of thermal inertia less than  being associated with three disjoint bright regions mostly in the northern hemisphere. Sufficient dust is raised in global storms to provide fine material adequate to produce these low-inertia areas but the specific deposition mechanism has not been defined. At the low resolution used, no complete exposures of clean rock were found. There is some tendency for darker material to be associated with higher thermal inertia, although the trend is far from one to one. The distribution of high- and low-inertia areas is sufficiently nonrandom to produce a variation in whole-disk brightness temperature with central meridian longitude. This variation and the change in surface kinetic temperature associated with dust storms are factors in establishing the whole-disk brightness temperature at radio and infrared wavelengths and will be important for those who use Mars as a calibration source.

Pairing field and moments of inertia of superdeformed nuclei

International Nuclear Information System (INIS)

Chen Yongjing; Chen Yongshou; Xu Fuxin

2002-01-01

The authors have systematically analysed the dynamic moments of inertia of the experimental superdeformed (SD) bands observed in the A = 190, 150 and 60-80 mass regions as functions of rotational frequency. By combining the different mass regions, the dramatic features of the dynamic moments of inertia were found and explained based on the calculations of the pairing fields of SD nuclei with the anisotropic harmonic oscillator quadrupole pairing Hartree-Fock-Bogoliubov model

Observing the variation of asteroid thermal inertia with heliocentric distance

Science.gov (United States)

Rozitis, B.; Green, S. F.; MacLennan, E.; Emery, J. P.

2018-06-01

Thermal inertia is a useful property to characterize a planetary surface, since it can be used as a qualitative measure of the regolith grain size. It is expected to vary with heliocentric distance because of its dependence on temperature. However, no previous investigation has conclusively observed a change in thermal inertia for any given planetary body. We have addressed this by using NEOWISE data and the Advanced Thermophysical Model to study the thermophysical properties of the near-Earth asteroids (1036) Ganymed, (1580) Betulia, and (276 049) 2002 CE26 as they moved around their highly eccentric orbits. We confirm that the thermal inertia values of Ganymed and 2002 CE26 do vary with heliocentric distance, although the degree of variation observed depends on the spectral emissivity assumed in the thermophysical modelling. We also confirm that the thermal inertia of Betulia did not change for three different observations obtained at the same heliocentric distance. Depending on the spectral emissivity, the variations for Ganymed and 2002 CE26 are potentially more extreme than that implied by theoretical models of heat transfer within asteroidal regoliths, which might be explained by asteroids having thermal properties that also vary with depth. Accounting for this variation reduces a previously observed trend of decreasing asteroid thermal inertia with increasing size, and suggests that the surfaces of small and large asteroids could be much more similar than previously thought. Furthermore, this variation can affect Yarkovsky orbital drift predictions by a few tens of per cent.

Thouless-Valatin rotational moment of inertia from linear response theory

Science.gov (United States)

Petrík, Kristian; Kortelainen, Markus

2018-03-01

Spontaneous breaking of continuous symmetries of a nuclear many-body system results in the appearance of zero-energy restoration modes. These so-called spurious Nambu-Goldstone modes represent a special case of collective motion and are sources of important information about the Thouless-Valatin inertia. The main purpose of this work is to study the Thouless-Valatin rotational moment of inertia as extracted from the Nambu-Goldstone restoration mode that results from the zero-frequency response to the total-angular-momentum operator. We examine the role and effects of the pairing correlations on the rotational characteristics of heavy deformed nuclei in order to extend our understanding of superfluidity in general. We use the finite-amplitude method of the quasiparticle random-phase approximation on top of the Skyrme energy density functional framework with the Hartree-Fock-Bogoliubov theory. We have successfully extended this formalism and established a practical method for extracting the Thouless-Valatin rotational moment of inertia from the strength function calculated in the symmetry-restoration regime. Our results reveal the relation between the pairing correlations and the moment of inertia of axially deformed nuclei of rare-earth and actinide regions of the nuclear chart. We have also demonstrated the feasibility of the method for obtaining the moment of inertia for collective Hamiltonian models. We conclude that from the numerical and theoretical perspective, the finite-amplitude method can be widely used to effectively study rotational properties of deformed nuclei within modern density functional approaches.

Effect of moment of inertia to H type vertical axis wind turbine aerodynamic performance

International Nuclear Information System (INIS)

Yang, C X; Li, S T

2013-01-01

The main aerodynamic performances (out power out power coefficient torque torque coefficient and so on) of H type Vertical Axis wind Turbine (H-VAWT) which is rotating machinery will be impacted by moment of inertia. This article will use NACA0018 airfoil profile to analyze that moment of inertia through impact performance of H type VAWT by utilizing program of Matlab and theory of Double-Multiple Streamtube. The results showed that the max out power coefficient was barely impacted when moment of inertia is changed in a small area,but the lesser moment of inertia's VAWT needs a stronger wind velocity to obtain the max out power. The lesser moment of inertia's VAWT has a big out power coefficient, torque coefficient and out power before it gets to the point of max out power coefficient. Out power coefficient, torque and torque coefficient will obviously change with wind velocity increased for VAWT of the lesser moment of inertia

Inertia in travel choice : The role of risk aversion and learning

NARCIS (Netherlands)

Chorus, C.; Dellaert, B.

2009-01-01

This paper contributes to literature by showing how travellers that make normatively rational choices exhibit inertia during a series of risky choices. Our analyses complement other studies that conceive inertia as the result of boundedly rational or even non-deliberate, habitual decision-making. We

Thermal inertia of eclipsing binary asteroids : the role of component shape

NARCIS (Netherlands)

Mueller, Michael; van de Weijgaert, Marlies

2015-01-01

Thermal inertia controls the temperature distribution on asteroid surfaces. This is of crucial importance to the Yarkovsky effect and for the planning of spacecraft operations on or near the surface. Additionally, thermal inertia is a sensitive indicator for regolith structure.A uniquely direct way

Adverse Selection and Inertia in Health Insurance Markets: When Nudging Hurts.

Science.gov (United States)

Handel, Benjamin R

2013-12-01

This paper investigates consumer inertia in health insurance markets, where adverse selection is a potential concern. We leverage a major change to insurance provision that occurred at a large firm to identify substantial inertia, and develop and estimate a choice model that also quantifies risk preferences and ex ante health risk. We use these estimates to study the impact of policies that nudge consumers toward better decisions by reducing inertia. When aggregated, these improved individual-level choices substantially exacerbate adverse selection in our setting, leading to an overall reduction in welfare that doubles the existing welfare loss from adverse selection.

Medicaid program choice, inertia and adverse selection.

Science.gov (United States)

Marton, James; Yelowitz, Aaron; Talbert, Jeffery C

2017-12-01

In 2012, Kentucky implemented Medicaid managed care statewide, auto-assigned enrollees to three plans, and allowed switching. Using administrative data, we find that the state's auto-assignment algorithm most heavily weighted cost-minimization and plan balancing, and placed little weight on the quality of the enrollee-plan match. Immobility - apparently driven by health plan inertia - contributed to the success of the cost-minimization strategy, as more than half of enrollees auto-assigned to even the lowest quality plans did not opt-out. High-cost enrollees were more likely to opt-out of their auto-assigned plan, creating adverse selection. The plan with arguably the highest quality incurred the largest initial profit margin reduction due to adverse selection prior to risk adjustment, as it attracted a disproportionate share of high-cost enrollees. The presence of such selection, caused by differential degrees of mobility, raises concerns about the long run viability of the Medicaid managed care market without such risk adjustment. Copyright © 2017 Elsevier B.V. All rights reserved.

On the Inertia Term of Projectile's Penetration Resistance

Directory of Open Access Journals (Sweden)

Yu Shan

2013-01-01

Full Text Available The effect of the target inertia term of rigid kinetic energy projectiles (KEP’s penetration resistance is investigated using nonlinear dynamic code LS-DYNA and four constitutive models. It is found that the damage number of target can be used to measure the influence of the inertia term. The smaller the damage number is, the less influence the inertia term has. The less dependent the resistance has on projectile velocity, the more accurate it is to treat the resistance as a constant. For the ogive-nose projectile with CRH of 3, when the target is aluminum, steel, or other metals, the threshold velocity for the constant resistance is at least 1258 m/s; when the target is concrete, rock, or other brittle materials, if the velocity of the projectile is greater than 400 m/s or so, the damage number would be very large, and the penetration resistance would clearly depend on the projectile’s velocity. The higher the elastic wave velocity is, the more penetration process is affected by the impact face.

Cooperation is enhanced by inhomogeneous inertia in spatial prisoner's dilemma game

Science.gov (United States)

Chang, Shuhua; Zhang, Zhipeng; Wu, Yu'e.; Xie, Yunya

2018-01-01

Inertia is an important factor that cannot be ignored in the real world for some lazy individuals in the process of decision making. In this work, we introduce a simple classification mechanism of strategy changing in evolutionary prisoner's dilemma games on different topologies. In this model, a part of players update their strategies according to not only the payoff difference, but also the inertia factor, which makes nodes heterogeneous and the system inhomogeneous. Moreover, we also study the impact of the number of neighbors on the evolution of cooperation. The results show that the evolution of cooperation will be promoted to a high level when the inertia factor and the inhomogeneous system are combined. In addition, we find that the more neighbors one player has, the higher density of cooperators is sustained in the optimal position. This work could be conducive to understanding the emergence and persistence of cooperative behavior caused by the inertia factor in reality.

An inertia-free filter line-search algorithm for large-scale nonlinear programming

Energy Technology Data Exchange (ETDEWEB)

Chiang, Nai-Yuan; Zavala, Victor M.

2016-02-15

We present a filter line-search algorithm that does not require inertia information of the linear system. This feature enables the use of a wide range of linear algebra strategies and libraries, which is essential to tackle large-scale problems on modern computing architectures. The proposed approach performs curvature tests along the search step to detect negative curvature and to trigger convexification. We prove that the approach is globally convergent and we implement the approach within a parallel interior-point framework to solve large-scale and highly nonlinear problems. Our numerical tests demonstrate that the inertia-free approach is as efficient as inertia detection via symmetric indefinite factorizations. We also demonstrate that the inertia-free approach can lead to reductions in solution time because it reduces the amount of convexification needed.

Reduction of nuclear moment of inertia due to pairing interaction

International Nuclear Information System (INIS)

Zeng, J.Y.; Jin, T.H.; Zhao, Z.J.

1994-01-01

The BCS theoretical values of the moments of inertia of even-even nuclei are systematically smaller than the experimental ones by a factor of 10--40%. This long-standing discrepancy disappears in the particle-number-conserving treatment for the cranked shell model, in which the blocking effects are taken into account exactly. The calculated moments of inertia satisfactorily reproduce the experimental data covering a large number of rare-earth even-even nuclei, whose deformations and single-particle states are well characterized (Lund systematics). The pairing interaction strength G is unambiguously determined by the even-odd mass difference. The reduction of the moment of inertia due to the antialignment effect of pairing interaction is discussed and no systematic excessive reduction is found

Inertia coupling analysis of a self-decoupled wheel force transducer under multi-axis acceleration fields.

Directory of Open Access Journals (Sweden)

Lihang Feng

Full Text Available Wheel force transducer (WFT, which measures the three-axis forces and three-axis torques applied to the wheel, is an important instrument in the vehicle testing field and has been extremely promoted by researchers with great interests. The transducer, however, is typically mounted on the wheel of a moving vehicle, especially on a high speed car, when abruptly accelerating or braking, the mass/inertia of the transducer/wheel itself will have an extra effect on the sensor response so that the inertia/mass loads will also be detected and coupled into the signal outputs. The effect which is considered to be inertia coupling problem will decrease the sensor accuracy. In this paper, the inertia coupling of a universal WFT under multi-axis accelerations is investigated. According to the self-decoupling approach of the WFT, inertia load distribution is solved based on the principle of equivalent mass and rotary inertia, thus then inertia impact can be identified with the theoretical derivation. The verification is achieved by FEM simulation and experimental tests. Results show that strains in simulation agree well with the theoretical derivation. The relationship between the applied acceleration and inertia load for both wheel force and moment is the approximate linear, respectively. All the relative errors are less than 5% which are within acceptable and the inertia loads have the maximum impact on the signal output about 1.5% in the measurement range.

Inertia coupling analysis of a self-decoupled wheel force transducer under multi-axis acceleration fields.

Science.gov (United States)

Feng, Lihang; Lin, Guoyu; Zhang, Weigong; Dai, Dong

2015-01-01

Wheel force transducer (WFT), which measures the three-axis forces and three-axis torques applied to the wheel, is an important instrument in the vehicle testing field and has been extremely promoted by researchers with great interests. The transducer, however, is typically mounted on the wheel of a moving vehicle, especially on a high speed car, when abruptly accelerating or braking, the mass/inertia of the transducer/wheel itself will have an extra effect on the sensor response so that the inertia/mass loads will also be detected and coupled into the signal outputs. The effect which is considered to be inertia coupling problem will decrease the sensor accuracy. In this paper, the inertia coupling of a universal WFT under multi-axis accelerations is investigated. According to the self-decoupling approach of the WFT, inertia load distribution is solved based on the principle of equivalent mass and rotary inertia, thus then inertia impact can be identified with the theoretical derivation. The verification is achieved by FEM simulation and experimental tests. Results show that strains in simulation agree well with the theoretical derivation. The relationship between the applied acceleration and inertia load for both wheel force and moment is the approximate linear, respectively. All the relative errors are less than 5% which are within acceptable and the inertia loads have the maximum impact on the signal output about 1.5% in the measurement range.

Emotional Inertia is Associated with Lower Well-Being Controlling for Differences in Emotional Context

Directory of Open Access Journals (Sweden)

Peter eKoval

2016-01-01

Full Text Available Previous studies have linked higher emotional inertia (i.e., a stronger autoregressive slope of emotions with lower well-being. We aimed to replicate these findings, while extending upon previous research by addressing a number of unresolved issues and controlling for potential confounds. Specifically, we report results from two studies (Ns = 100 & 202 examining how emotional inertia, assessed in response to a standardized sequence of emotional stimuli in the lab, correlates with several measures of well-being. The current studies build on previous research by examining how inertia of both positive emotions (PE and negative emotions (NE are related to both positive (e.g., life satisfaction and negative (e.g., depressive symptoms indicators of well-being, while controlling for between-person differences in the mean level and variability of emotions. Our findings replicated previous research and further revealed that a NE inertia was more strongly associated with lower well-being than PE inertia; b emotional inertia correlated more consistently with negative indicators (e.g., depressive symptoms than positive indicators (e.g., life satisfaction of well-being; and c these relationships were independent of individual differences in mean level and variability of emotions. We conclude, in line with recent findings, that higher emotional inertia, particularly of NE, may indicate increased vulnerability to depression.

Moment of Inertia by Differentiation

Science.gov (United States)

Rizcallah, Joseph A.

2015-01-01

The calculation of the moment of inertia of an extended body, as presented in standard introductory-level textbooks, involves the evaluation of a definite integral--an operation often not fully mastered by beginners, let alone the conceptual difficulties it presents, even to the advanced student, in understanding and setting up the integral in the…

Organic food consumption in China: the moderating role of inertia

Directory of Open Access Journals (Sweden)

Yen Tsai-Fa

2018-01-01

Full Text Available Despite the progressive development of the organic food sector across Taiwan Strait, little is known about how consumers’ self congruity will influence organic food decision through various degrees of attitude and whether or not consumers with various degrees of inertia will vary in their intention to buy organic foods. The current study aims to examine the effect of consumption self congruity on behavioral intention related to organic food consumption under the mediating role of attitude as well as the moderating role of inertia. Research data were collected from organic food consumers across Taiwan Strait via a questionnaire survey, eventually obtaining 500 valid questionnaires for analysis. This study tested the overall model fit and hypotheses through structural equation modeling method (SEM. The results show that consumer attitude significantly mediates the effects of self congruity on organic food purchase intention. Moreover, the moderating effect of inertia is statistical significance, indicating that the relationship between attitude and purchase intention becomes weaker in the condition of consumers with higher degree of inertia. Several implications and suggestions are also discussed for organic food providers and marketers.

Effects of electron inertia in capacitively coupled radio frequency discharges

International Nuclear Information System (INIS)

Xiang Nong

2004-01-01

The effects of the electron inertia on the plasma and sheath dynamics in capacitively coupled rf discharges with frequency ωω pi are investigated (here, ω and ω pi are the rf frequency and bulk ion plasma frequency, respectively). It is found that the effects of the electron inertia on the plasma density and ion velocity in the quasi-neutral region depend on the ratio of the amplitudes of the discharge current I rf and ion current I B =en 0 C s (here, e is the unit charge, n 0 is the plasma density at center, and C s is the ion sound speed). If the ratio is small so that I rf /I B √(m i /m e ) (here, m i and m e are ion and electron masses, respectively), the ion and time-averaged electron densities, ion velocity, and electric fields are little affected by the electron inertia. Otherwise, the effects of the electron inertia are significant. It is also shown that the assumption that the electrons obey the Boltzmann distribution in the sheath is invalid when the electron flux flowing to the electrode is significant

Virtual Inertia Control-Based Model Predictive Control for Microgrid Frequency Stabilization Considering High Renewable Energy Integration

Directory of Open Access Journals (Sweden)

Thongchart Kerdphol

2017-05-01

Full Text Available Renewable energy sources (RESs, such as wind and solar generations, equip inverters to connect to the microgrids. These inverters do not have any rotating mass, thus lowering the overall system inertia. This low system inertia issue could affect the microgrid stability and resiliency in the situation of uncertainties. Today’s microgrids will become unstable if the capacity of RESs become larger and larger, leading to the weakening of microgrid stability and resilience. This paper addresses a new concept of a microgrid control incorporating a virtual inertia system based on the model predictive control (MPC to emulate virtual inertia into the microgrid control loop, thus stabilizing microgrid frequency during high penetration of RESs. The additional controller of virtual inertia is applied to the microgrid, employing MPC with virtual inertia response. System modeling and simulations are carried out using MATLAB/Simulink® software. The simulation results confirm the superior robustness and frequency stabilization effect of the proposed MPC-based virtual inertia control in comparison to the fuzzy logic system and conventional virtual inertia control in a system with high integration of RESs. The proposed MPC-based virtual inertia control is able to improve the robustness and frequency stabilization of the microgrid effectively.

Crustal fraction of moment of inertia in pulsars

International Nuclear Information System (INIS)

Atta, Debasis; Mukhopadhyay, Somnath; Basu, D.N.

2015-01-01

In the present work, stability of the β-equilibrated dense nuclear matter is analyzed with respect to the thermodynamic stability conditions. Based on the density dependent M3Y (DDM3Y) effective nucleon-nucleon (NN) interaction, the location of the inner edge of neutron star crusts and core-crust transition density and pressure are calculated and crustal fraction of moment of inertia is determined. These results for pressure and density at core-crust transition together with the observed minimum crustal fraction of the total moment of inertia provide a new limit for the radius of the Vela pulsar

An electromagnetic basis for inertia and gravitation: What are the implications for 21st century physics and technology?

International Nuclear Information System (INIS)

Haisch, Bernhard; Rueda, Alfonso

1998-01-01

The basis of most modern technology is the manipulation of electromagnetic phenomena. Haisch, Rueda and Puthoff (1994a) published a controversial but substantive formulation of a concept proposing an explanation of inertia of matter as an electromagnetic phenomenon originating in the zero-point field (ZPF) of the quantum vacuum. This suggests that Newton's equation of motion can be derived from Maxwell's equations of electrodynamics, in that inertial mass is postulated to be not an intrinsic property of matter but rather a kind of electromagnetic drag force (which temporarily is a place holder for a more general quantum vacuum reaction effect) that proves to be acceleration dependent by virtue of the spectral characteristics of the ZPF. Moreover the principle of equivalence implies that in this view gravitation would also be electromagnetic in origin along the lines proposed by Sakharov (1968). A NASA-funded research effort has been underway at the Lockheed Martin Advanced Technology Center in Palo Alto and at California State University in Long Beach to develop and test these ideas. An effort to generalize the 1994 ZPF-inertia concept into a proper relativistic formulation has been successful. With regard to the goals of the NASA Breakthrough Propulsion Physics Program we can, on the basis of the ZPF-inertia concept, definitively rule out one speculatively hypothesized propulsion mechanism: matter possessing negative inertial mass, a concept originated by Bondi (1957). The existence of this is shown to be logically impossible. On the other hand, the linked ZPF-inertia and ZPF-gravity concepts open the conceptual possibility of manipulation of inertia and gravitation, since both are postulated to be electromagnetic phenomena. Whether this will translate into actual technological potential, especially with respect to spacecraft propulsion and future interstellar travel capability, is an open question. The (possibly comparable) time scale for translation of Einstein

Smoothelin expression in the gastrointestinal tract: implication in colonic inertia.

Science.gov (United States)

Chan, Owen T M; Chiles, Lauren; Levy, Mary; Zhai, Jing; Yerian, Lisa M; Xu, Haodong; Xiao, Shu-Yuan; Soffer, Edy E; Conklin, Jeffrey L; Dhall, Deepti; Kahn, Melissa E; Balzer, Bonnie L; Amin, Mahul B; Wang, Hanlin L

2013-10-01

Colonic inertia is a frustrating motility disorder to patients, clinicians, and pathologists. The pathogenesis is largely unknown. The aims of this study were to: (1) characterize the expression of smoothelin, a novel smooth muscle-specific contractile protein expressed only by terminally differentiated smooth muscle cells, in the normal gastrointestinal (GI) tract; and (2) determine whether smoothelin is aberrantly expressed in patients with colonic inertia. A total of 57 resections of the normal GI tract (distal esophagus to left colon) were obtained from patients without GI motor dysfunction. Sixty-one colon resections were obtained from patients with a clinical diagnosis of colonic inertia. Smoothelin immunostaining was conducted on full-thickness tissue sections. In the nondysmotile controls, strong and diffuse cytoplasmic staining for smoothelin was observed in both the inner circular and outer longitudinal layers of the muscularis propria (MP) throughout the entire GI tract. The muscularis mucosae (MM) and muscular vessel walls were either completely negative or only patchily and weakly stained. The 1 exception to this pattern was observed in the distal esophagus, in which the MM was also diffusely and strongly stained. In cases with colonic inertia, a moderate to marked reduction of smoothelin immunoreactivity was observed in 15 of 61 (24.6%) colon resections, selectively seen in the outer layer of the MP. The data demonstrate that smoothelin is differentially expressed in the MP and MM of the normal GI tract and suggest that defective smoothelin expression may play a role in the pathogenesis of colonic inertia in a subset of patients.

Description of the turnover of the dynamical moment of inertia of the superdeformed nuclear state

International Nuclear Information System (INIS)

Yuxin Liu; Jiangang Song; Hong-zhou Sun; Jia-jun Wang; En-guang Zhao

1998-01-01

We propose in this paper an approach to describe the dynamical moment of inertia of superdeformed nuclear states in the spirit of variable moments of inertia. Both the general changing feature and the turnover of dynamical moments of inertia with rotational frequency are well described in our approach. It indicates that the competition between the angular momentum driving effect and the restraining effect plays a crucial role in determining the dynamical moments of inertia of superdeformed nuclear states. (author)

Direct real-time neural evidence for task-set inertia.

Science.gov (United States)

Evans, Lisa H; Herron, Jane E; Wilding, Edward L

2015-03-01

One influential explanation for the costs incurred when switching between tasks is that they reflect interference arising from completing the previous task-known as task-set inertia. We report a novel approach for assessing task-set inertia in a memory experiment using event-related potentials (ERPs). After a study phase, participants completed a test block in which they switched between a memory task (retrieving information from the study phase) and a perceptual task. These tasks alternated every two trials. An ERP index of the retrieval of study information was evident in the memory task. It was also present on the first trial of the perceptual task but was markedly attenuated on the second. Moreover, this task-irrelevant ERP activity was positively correlated with a behavioral cost associated with switching between tasks. This real-time measure of neural activity thus provides direct evidence of task-set inertia, its duration, and the functional role it plays in switch costs. © The Author(s) 2015.

Patient and Provider Factors Affecting Clinical Inertia in Patients With Type 2 Diabetes on Metformin Monotherapy.

Science.gov (United States)

Mahabaleshwarkar, Rohan; Gohs, Frank; Mulder, Holly; Wilkins, Nick; DeSantis, Andrea; Anderson, William E; Ejzykowicz, Flavia; Rajpathak, Swapnil; Norton, H James

2017-08-01

Our aim was to determine the extent of clinical inertia and the associated patient and provider factors in patients with type 2 diabetes on metformin monotherapy (MM) at a large integrated health care system in the United States. The study cohort included patients with type 2 diabetes aged 18 to 85 years, on MM between January 2009 and September 2013, who experienced MM failure (had an uncontrolled glycosylated hemoglobin [HbA 1c ] reading (≥8.0% [64 mmol/mol]) after at least 90 days of MM). Clinical inertia was defined as absence of treatment intensification with an add-on therapy within 180 days after the MM failure (index date). The impact of patient and provider factors on clinical inertia was determined using generalized estimating equations. The study cohort consisted of 996 patients; 58% were men and 59% were white, with a mean age of 53 (11.8) years. Of these, 49.8% experienced clinical inertia. Lower HbA 1c at index date, absence of liver diseases, absence of renal diseases, and greater provider age were associated with clinical inertia. The clinical inertia rate in a secondary analysis considering HbA 1c inertia. Considerable clinical inertia rates were observed in our real-world patient population, suggesting the need of interventions to reduce clinical inertia in clinical practice. Information about patient and provider factors affecting clinical inertia provided by this study could help healthcare policymakers plan and implement such interventions. Copyright © 2017 Elsevier HS Journals, Inc. All rights reserved.

40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

Science.gov (United States)

2010-07-01

... inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. Applicability. Section 86.129-94 (a) applies... testing using paragraphs (e)(1) and (e)(2) of this section. (f)(1) Required test dynamometer inertia...

Moments of inertia in a semiclassical approach

International Nuclear Information System (INIS)

Benchein, K.

1993-01-01

Semiclassical calculations have been performed for 31 nuclei. As a result of preliminary non-fully self-consistent calculations, the moments of inertia in investigated nuclei abd spin degrees of freedom are found

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

Directory of Open Access Journals (Sweden)

Yongle Mao

2016-12-01

Full Text Available Mechanical model is generally required in high dynamic sensorless motor control schemes for zero phase lag estimation of rotor position and speed. However, the rotational inertia uncertainty will cause dynamic estimation errors, eventually resulting in performance deterioration of the sensorless control system. Therefore, this article proposes a high dynamic performance sensorless control strategy with online adjustment of the rotational inertia. Based on a synthetic back electromotive force model, the voltage equation of interior permanent magnet synchronous motor is transformed to that of an equivalent non-salient permanent magnet synchronous motor. Then, an extended nonlinear observer is designed for interior permanent magnet synchronous motor in the stator-fixed coordinate frame, with rotor position, speed and load torque simultaneously estimated. The effect of inaccurate rotational inertia on the estimation of rotor position and speed is investigated, and a novel rotational inertia adjustment approach that employs the gradient descent algorithm is proposed to suppress the dynamic estimation errors. The effectiveness of the proposed control strategy is demonstrated by experimental tests.

Atmospheric effects on the remote determination of thermal inertia on Mars

International Nuclear Information System (INIS)

Haberle, R.M.; Jakosky, B.M.

1991-01-01

Measurements of the IR brightness temperature at the Martian surface at many different times of day are presently compared with temperatures predicted by thermal models which allow sunlight to reach the surface unattenuated, in order to determine the thermal inertia of the uppermost 1-10 cm of the Martian surface. The consequences of the assumptions made are assessed in view of results from a different thermal model which invokes radiation-transfer through a dusty CO2 atmosphere, as well as sensible heat-exchange with the surface. Smaller thermal inertias imply smaller particle sizes; the results obtained suggest that low thermal-inertia regions consist of 5-micron, rather than 50-micron, particle sizes. 52 refs

Mass and Inertia Parameters for Nuclear Fission

International Nuclear Information System (INIS)

Damgaard, J.; Pauli, H.C.; Strutinsky, V.M.; Wong, C.Y.; Brack, M.; Stenholm-Jensen, A.

1969-01-01

The effective mass parameter and the moments of inertia for a deformed nucleus are evaluated using the cranking-model formalism. Special attention is paid to the dependence of these quantities on the intrinsic structure, which may arise due to shells in deformed nuclei. It is found that these inertial parameters are very much influenced by the shells present. The effective-mass parameter, which appears in an important way in the theory of spontaneous fission, fluctuates in the same manner as the shell-energy corrections. Its values at the fission barrier are up to two or three times larger than those at the equilibrium minima. This correlation comes about because for the effective mass the change in the local density of single-particle states is very important, much more so than the change in the pairing correlation. The moments of inertia which enter in the theory of angular anisotropy of fission fragments, also fluctuate as a function of the deformation. At low temperatures, the fluctuation is large and shows a distinct but more complicated correlation with the shells. At high temperatures, the moments of inertia fluctuate with a smaller amplitude about the rigid-body value in correlation with the energy-shell corrections. For the first-and second barriers, the rigid-body values are essentially reached at a nuclear temperature of 0.8 to 1.0 MeV. (author)

Effects of electron inertia in collisionless magnetic reconnection

Energy Technology Data Exchange (ETDEWEB)

Andrés, Nahuel, E-mail: nandres@iafe.uba.ar; Gómez, Daniel [Instituto de Astronomía y Física del Espacio, CC. 67, suc. 28, 1428, Buenos Aires (Argentina); Departamento de Física, Facultad de Ciencias Exactas y Naturales, Univrsidad de Buenos Aires, Pabellón I, 1428, Buenos Aires (Argentina); Martin, Luis; Dmitruk, Pablo [Departamento de Física, Facultad de Ciencias Exactas y Naturales, Univrsidad de Buenos Aires, Pabellón I, 1428, Buenos Aires (Argentina)

2014-07-15

We present a study of collisionless magnetic reconnection within the framework of full two-fluid MHD for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure and electron inertia. We performed 2.5D simulations using a pseudo-spectral code with no dissipative effects. We check that the ideal invariants of the problem are conserved down to round-off errors. Our numerical results confirm that the change in the topology of the magnetic field lines is exclusively due to the presence of electron inertia. The computed reconnection rates remain a fair fraction of the Alfvén velocity, which therefore qualifies as fast reconnection.

Two-dimensional plasma expansion in a magnetic nozzle: Separation due to electron inertia

International Nuclear Information System (INIS)

Ahedo, Eduardo; Merino, Mario

2012-01-01

A previous axisymmetric model of the supersonic expansion of a collisionless, hot plasma in a divergent magnetic nozzle is extended here in order to include electron-inertia effects. Up to dominant order on all components of the electron velocity, electron momentum equations still reduce to three conservation laws. Electron inertia leads to outward electron separation from the magnetic streamtubes. The progressive plasma filling of the adjacent vacuum region is consistent with electron-inertia being part of finite electron Larmor radius effects, which increase downstream and eventually demagnetize the plasma. Current ambipolarity is not fulfilled and ion separation can be either outwards or inwards of magnetic streamtubes, depending on their magnetization. Electron separation penalizes slightly the plume efficiency and is larger for plasma beams injected with large pressure gradients. An alternative nonzero electron-inertia model [E. Hooper, J. Propul. Power 9, 757 (1993)] based on cold plasmas and current ambipolarity, which predicts inwards electron separation, is discussed critically. A possible competition of the gyroviscous force with electron-inertia effects is commented briefly.

40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

Science.gov (United States)

2010-07-01

... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

Science.gov (United States)

2010-07-01

... inertia weight class determination. 86.129-80 Section 86.129-80 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up to 1,062 1,000 1,000 1...

A Review on Inertia and Linear Friction Welding of Ni-Based Superalloys

Science.gov (United States)

Chamanfar, Ahmad; Jahazi, Mohammad; Cormier, Jonathan

2015-04-01

Inertia and linear friction welding are being increasingly used for near-net-shape manufacturing of high-value materials in aerospace and power generation gas turbines because of providing a better quality joint and offering many advantages over conventional fusion welding and mechanical joining techniques. In this paper, the published works up-to-date on inertia and linear friction welding of Ni-based superalloys are reviewed with the objective to make clarifications on discrepancies and uncertainties reported in literature regarding issues related to these two friction welding processes as well as microstructure, texture, and mechanical properties of the Ni-based superalloy weldments. Initially, the chemical composition and microstructure of Ni-based superalloys that contribute to the quality of the joint are reviewed briefly. Then, problems related to fusion welding of these alloys are addressed with due consideration of inertia and linear friction welding as alternative techniques. The fundamentals of inertia and linear friction welding processes are analyzed next with emphasis on the bonding mechanisms and evolution of temperature and strain rate across the weld interface. Microstructural features, texture development, residual stresses, and mechanical properties of similar and dissimilar polycrystalline and single crystal Ni-based superalloy weldments are discussed next. Then, application of inertia and linear friction welding for joining Ni-based superalloys and related advantages over fusion welding, mechanical joining, and machining are explained briefly. Finally, present scientific and technological challenges facing inertia and linear friction welding of Ni-based superalloys including those related to modeling of these processes are addressed.

Analyzing Effect of System Inertia on Grid Frequency Forecasting Usnig Two Stage Neuro-Fuzzy System

Science.gov (United States)

Chourey, Divyansh R.; Gupta, Himanshu; Kumar, Amit; Kumar, Jitesh; Kumar, Anand; Mishra, Anup

2018-04-01

Frequency forecasting is an important aspect of power system operation. The system frequency varies with load-generation imbalance. Frequency variation depends upon various parameters including system inertia. System inertia determines the rate of fall of frequency after the disturbance in the grid. Though, inertia of the system is not considered while forecasting the frequency of power system during planning and operation. This leads to significant errors in forecasting. In this paper, the effect of inertia on frequency forecasting is analysed for a particular grid system. In this paper, a parameter equivalent to system inertia is introduced. This parameter is used to forecast the frequency of a typical power grid for any instant of time. The system gives appreciable result with reduced error.

Validity, Reliability, and Inertia of Four Different Temperature Capsule Systems.

Science.gov (United States)

Bongers, Coen C W G; Daanen, Hein A M; Bogerd, Cornelis P; Hopman, Maria T E; Eijsvogels, Thijs M H

2018-01-01

Telemetric temperature capsule systems are wireless, relatively noninvasive, and easily applicable in field conditions and have therefore great advantages for monitoring core body temperature. However, the accuracy and responsiveness of available capsule systems have not been compared previously. Therefore, the aim of this study was to examine the validity, reliability, and inertia characteristics of four ingestible temperature capsule systems (i.e., CorTemp, e-Celsius, myTemp, and VitalSense). Ten temperature capsules were examined for each system in a temperature-controlled water bath during three trials. The water bath temperature gradually increased from 33°C to 44°C in trials 1 and 2 to assess the validity and reliability, and from 36°C to 42°C in trial 3 to assess the inertia characteristics of the temperature capsules. A systematic difference between capsule and water bath temperature was found for CorTemp (0.077°C ± 0.040°C), e-Celsius (-0.081°C ± 0.055°C), myTemp (-0.003°C ± 0.006°C), and VitalSense (-0.017°C ± 0.023°C; P 0.05). Comparable inertia characteristics were found for CorTemp (25 ± 4 s), e-Celsius (21 ± 13 s), and myTemp (19 ± 2 s), whereas the VitalSense system responded more slowly (39 ± 6 s) to changes in water bath temperature (P inertia were observed between capsule systems, an excellent validity, test-retest reliability, and inertia was found for each system between 36°C and 44°C after removal of outliers.

Scaling of rotational inertia of primate mandibles.

Science.gov (United States)

Ross, Callum F; Iriarte-Diaz, Jose; Platts, Ellen; Walsh, Treva; Heins, Liam; Gerstner, Geoffrey E; Taylor, Andrea B

2017-05-01

The relative importance of pendulum mechanics and muscle mechanics in chewing dynamics has implications for understanding the optimality criteria driving the evolution of primate feeding systems. The Spring Model (Ross et al., 2009b), which modeled the primate chewing system as a forced mass-spring system, predicted that chew cycle time would increase faster than was actually observed. We hypothesized that if mandibular momentum plays an important role in chewing dynamics, more accurate estimates of the rotational inertia of the mandible would improve the accuracy with which the Spring Model predicts the scaling of primate chew cycle period. However, if mass-related momentum effects are of negligible importance in the scaling of primate chew cycle period, this hypothesis would be falsified. We also predicted that greater "robusticity" of anthropoid mandibles compared with prosimians would be associated with higher moments of inertia. From computed tomography scans, we estimated the scaling of the moment of inertia (I j ) of the mandibles of thirty-one species of primates, including 22 anthropoid and nine prosimian species, separating I j into the moment about a transverse axis through the center of mass (I xx ) and the moment of the center of mass about plausible axes of rotation. We found that across primates I j increases with positive allometry relative to jaw length, primarily due to positive allometry of jaw mass and I xx , and that anthropoid mandibles have greater rotational inertia compared with prosimian mandibles of similar length. Positive allometry of I j of primate mandibles actually lowers the predictive ability of the Spring Model, suggesting that scaling of primate chew cycle period, and chewing dynamics in general, are more strongly influenced by factors other than scaling of inertial properties of the mandible, such as the dynamic properties of the jaw muscles and neural control. Differences in cycle period scaling between chewing and locomotion

A class of parallel algorithms for computation of the manipulator inertia matrix

Science.gov (United States)

Fijany, Amir; Bejczy, Antal K.

1989-01-01

Parallel and parallel/pipeline algorithms for computation of the manipulator inertia matrix are presented. An algorithm based on composite rigid-body spatial inertia method, which provides better features for parallelization, is used for the computation of the inertia matrix. Two parallel algorithms are developed which achieve the time lower bound in computation. Also described is the mapping of these algorithms with topological variation on a two-dimensional processor array, with nearest-neighbor connection, and with cardinality variation on a linear processor array. An efficient parallel/pipeline algorithm for the linear array was also developed, but at significantly higher efficiency.

Partial inertia induces additional phase transition in the majority vote model.

Science.gov (United States)

Harunari, Pedro E; de Oliveira, M M; Fiore, C E

2017-10-01

Explosive (i.e., discontinuous) transitions have aroused great interest by manifesting in distinct systems, such as synchronization in coupled oscillators, percolation regime, absorbing phase transitions, and more recently, the majority-vote model with inertia. In the latter, the model rules are slightly modified by the inclusion of a term depending on the local spin (an inertial term). In such a case, Chen et al. [Phys Rev. E 95, 042304 (2017)2470-004510.1103/PhysRevE.95.042304] have found that relevant inertia changes the nature of the phase transition in complex networks, from continuous to discontinuous. Here we give a further step by embedding inertia only in vertices with degree larger than a threshold value 〈k〉k^{*}, 〈k〉 being the mean system degree and k^{*} the fraction restriction. Our results, from mean-field analysis and extensive numerical simulations, reveal that an explosive transition is presented in both homogeneous and heterogeneous structures for small and intermediate k^{*}'s. Otherwise, a large restriction can sustain a discontinuous transition only in the heterogeneous case. This shares some similarities with recent results for the Kuramoto model [Phys. Rev. E 91, 022818 (2015)PLEEE81539-375510.1103/PhysRevE.91.022818]. Surprisingly, intermediate restriction and large inertia are responsible for the emergence of an extra phase, in which the system is partially synchronized and the classification of phase transition depends on the inertia and the lattice topology. In this case, the system exhibits two phase transitions.

Emotional Inertia is Associated with Lower Well-Being when Controlling for Differences in Emotional Context.

Science.gov (United States)

Koval, Peter; Sütterlin, Stefan; Kuppens, Peter

2015-01-01

Previous studies have linked higher emotional inertia (i.e., a stronger autoregressive slope of emotions) with lower well-being. We aimed to replicate these findings, while extending upon previous research by addressing a number of unresolved issues and controlling for potential confounds. Specifically, we report results from two studies (Ns = 100 and 202) examining how emotional inertia, assessed in response to a standardized sequence of emotional stimuli in the lab, correlates with several measures of well-being. The current studies build on previous research by examining how inertia of both positive emotions (PE) and negative emotions (NE) relates to positive (e.g., life satisfaction) and negative (e.g., depressive symptoms) indicators of well-being, while controlling for between-person differences in the mean level and variability of emotions. Our findings replicated previous research and further revealed that (a) NE inertia was more strongly associated with lower well-being than PE inertia; (b) emotional inertia correlated more consistently with negative indicators (e.g., depressive symptoms) than positive indicators (e.g., life satisfaction) of well-being; and (c) these relationships were independent of individual differences in mean level and variability of emotions. We conclude, in line with recent findings, that higher emotional inertia, particularly of NE, may be an indicator of increased vulnerability to depression.

Inertia and advance in the organic sector: food education in Denmark

DEFF Research Database (Denmark)

Dahl, Astrid; Kristensen, Niels Heine

2005-01-01

Dahl A, & Kristensen NH (2005): Inertia and advance in the organic sector: food education in Denmark. Chapter in Sociological Perspectives of Organic Agriculture. (Edt.: G. Holt and M. Reed). CABI, UK......Dahl A, & Kristensen NH (2005): Inertia and advance in the organic sector: food education in Denmark. Chapter in Sociological Perspectives of Organic Agriculture. (Edt.: G. Holt and M. Reed). CABI, UK...

The effects of one-body dissipation and collective inertias in heavy-ion scattering and fusion

International Nuclear Information System (INIS)

Stryjewski, J.S.

1989-01-01

A classical dynamical model of heavy ion scattering and fusion is presented. The model includes deformations, deformation-dependent inertias and one-body friction in both the entrance and exit channels. The deformation-dependent inertias are calculated using a hydrodynamic approach and the one-body friction is determined with the classical wall friction formalism. This model is used to study the effects of one-body friction and collective inertias on strongly damped heavy ion reactions and fusion. Quantum-mechanical calculations suggest that the strength of classical one-body friction, as calculated by the wall formalism, is too large by a factor of 3. Therefore, the fusion excitation functions for the reactions: 16 O + 16 O, 28 Si + 28 Si, 40 Ca + 40 Ca and 56 Fe + 56 Fe are calculated and compared with similar calculations in which the strength of the wall friction has been reduced by a factor of 3. Calculations using the full wall friction reproduce the experimental fusion excitation functions more accurately than calculations using the weaker wall friction. Also, because hydrodynamical inertias are the smallest possible classical inertias, the fusion excitation functions for: 16 O + 16 O, 28 Si + 28 Si, 40 Ca + 40 Ca and 56 Fe + 56 Fe are calculated with the size of the collective inertias increased by a factor of 2 over the hydrodynamical values. Once again, calculations using hydrodynamical collective inertias reproduce the experimental fusion excitation functions more accurately than calculations using the larger collective inertias. The effects of one-body friction and collective inertias on heavy ion scattering are also investigated; reaction times, scattering angles and energy loss are determined as functions of energy and angular momentum for the reactions 98 Mo + 98 Mo and 238 U + 238 U

Comparative analysis for low-mass and low-inertia dynamic balancing of mechanisms

NARCIS (Netherlands)

van der Wijk, V.; Demeulenaere, B.; Gosselin, C.M.; Herder, Justus Laurens

2012-01-01

Dynamic balance is an important feature of high speed mechanisms and robotics that need to minimize vibrations of the base. The main disadvantage of dynamic balancing, however, is that it is accompanied with a considerable increase in mass and inertia. Aiming at low-mass and low-inertia dynamic

Testing and Validation of the Dynamic Inertia Measurement Method

Science.gov (United States)

Chin, Alexander W.; Herrera, Claudia Y.; Spivey, Natalie D.; Fladung, William A.; Cloutier, David

2015-01-01

The Dynamic Inertia Measurement (DIM) method uses a ground vibration test setup to determine the mass properties of an object using information from frequency response functions. Most conventional mass properties testing involves using spin tables or pendulum-based swing tests, which for large aerospace vehicles becomes increasingly difficult and time-consuming, and therefore expensive, to perform. The DIM method has been validated on small test articles but has not been successfully proven on large aerospace vehicles. In response, the National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) conducted mass properties testing on an "iron bird" test article that is comparable in mass and scale to a fighter-type aircraft. The simple two-I-beam design of the "iron bird" was selected to ensure accurate analytical mass properties. Traditional swing testing was also performed to compare the level of effort, amount of resources, and quality of data with the DIM method. The DIM test showed favorable results for the center of gravity and moments of inertia; however, the products of inertia showed disagreement with analytical predictions.

Stereovision-based pose and inertia estimation of unknown and uncooperative space objects

Science.gov (United States)

Pesce, Vincenzo; Lavagna, Michèle; Bevilacqua, Riccardo

2017-01-01

Autonomous close proximity operations are an arduous and attractive problem in space mission design. In particular, the estimation of pose, motion and inertia properties of an uncooperative object is a challenging task because of the lack of available a priori information. This paper develops a novel method to estimate the relative position, velocity, angular velocity, attitude and the ratios of the components of the inertia matrix of an uncooperative space object using only stereo-vision measurements. The classical Extended Kalman Filter (EKF) and an Iterated Extended Kalman Filter (IEKF) are used and compared for the estimation procedure. In addition, in order to compute the inertia properties, the ratios of the inertia components are added to the state and a pseudo-measurement equation is considered in the observation model. The relative simplicity of the proposed algorithm could be suitable for an online implementation for real applications. The developed algorithm is validated by numerical simulations in MATLAB using different initial conditions and uncertainty levels. The goal of the simulations is to verify the accuracy and robustness of the proposed estimation algorithm. The obtained results show satisfactory convergence of estimation errors for all the considered quantities. The obtained results, in several simulations, shows some improvements with respect to similar works, which deal with the same problem, present in literature. In addition, a video processing procedure is presented to reconstruct the geometrical properties of a body using cameras. This inertia reconstruction algorithm has been experimentally validated at the ADAMUS (ADvanced Autonomous MUltiple Spacecraft) Lab at the University of Florida. In the future, this different method could be integrated to the inertia ratios estimator to have a complete tool for mass properties recognition.

Effects of additional inertia force on bubble breakup

International Nuclear Information System (INIS)

Pan Liangming; Zhang Wenzhi; Chen Deqi; Xu Jianhui; Xu Jianjun; Huang Yanping

2011-01-01

Through VOF two-phase flow model, the single bubble deformation and breakup in a vertical narrow channel is numerically investigated in the study based on the force balance at the process of bubble breakup. The effect of surface tension force, the additional inertia force and bubble initial shape on bubble breakup are analyzed according to the velocity variation at the break-up point and the minimum necking size when the bubble is breaking up. It is found that the surface tension force, the additional inertia force and the bubble initial shape have significant effects on the bubble breakup through the fluid injection toward to the bubble, which finally induces the onset of bubble breakup. (authors)

Motion, inertia and special relativity-a novel perspective

International Nuclear Information System (INIS)

Masreliez, C Johan

2007-01-01

A recent paper by the author proposes that the phenomenon of inertia may be explained if the four metrical coefficients in the Minkowskian line element were to change as a consequence of acceleration. A certain scale factor multiplying the four metrical coefficients was found, which depends solely on velocity. This dynamic scale factor, which is [1-(v/c) 2 )], models inertia as a gravitational-type phenomenon. With this metric the geodesic of general relativity is an identity, and all accelerating trajectories are geodesics. This paper shows that the same scale factor also agrees with special relativity, but offers a new perspective. A new kind of dynamic process involving four-dimensional scale transition is proposed

Inertia effects in rheometrical flow systems

NARCIS (Netherlands)

Waterman, H.A.

1976-01-01

The flow field of a linear viscoelastic material in the orthogonal rheometer, taking fluid inertia into account, has been studied theoretically and an exact solution is given. The flow field of a Newtonian liquid is included in this solution as a special case. The forces on the plates are readily

The Bumper Boats Effect: Effect of Inertia on Self Propelled Active Particles Systems

Science.gov (United States)

Dai, Chengyu; Bruss, Isaac; Glotzer, Sharon

Active matter has been well studied using the standard Brownian dynamics model, which assumes that the self-propelled particles have no inertia. However, many examples of active systems, such as sub-millimeter bacteria and colloids, have non-negligible inertia. Using particle-based Langevin Dynamics simulation with HOOMD-blue, we study the role of particle inertia on the collective emergent behavior of self-propelled particles. We find that inertia hinders motility-induced phase separation. This is because the effective speed of particles is reduced due to particle-particle collisions-\\x9Dmuch like bumper boats, which take time to reach terminal velocity after a crash. We are able to fully account for this effect by tracking a particle's average rather than terminal velocity, allowing us to extend the standard Brownian dynamics model to account for the effects of momentum. This study aims to inform experimental systems where the inertia of the active particles is non-negligible. We acknowledge the funding support from the Center for Bio-Inspired Energy Science (CBES), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0000989.

Evaluating the impact of investments in information technology on structural inertia in health organizations.

Science.gov (United States)

Bewley, Lee W

2010-01-01

Structural inertia is the overall capacity of an organization to adapt within a market environment. This paper reviews the impact of healthcare investments in information management/information technology (IM/IT) on the strategic management concept of structural inertia. Research indicates that healthcare executives should consider the relative state of structural inertia for their firms and match them with potential IM/IT solutions. Additionally, organizations should favorably consider IM/IT solutions that are comparatively less complex.

A Reevaluation of the Attentional Inertia Concept

NARCIS (Netherlands)

W.J.M.I. Verbeke (Willem)

1992-01-01

textabstractAnderson's (1983) theory about children's attention behavior during television viewing hypothesizes that attention behavior is affected by positive feedback (the inertia hypothesis) and the degree to which a child understands the television program. During an experiment, neither

Inertia and friction welding of aluminum alloy 1100 to type 316 stainless steel

International Nuclear Information System (INIS)

Perkins, M.A.

1979-01-01

The inertia and friction-welding processes were evaluated for joining aluminum alloy 1100-H14 and Type 316 vacuum-induction melted, vacuum-arc remelted (VIM VAR) stainless steel. While both processes consistently produced joints in which the strength exceeded the strength of the aluminum base metal, 100 percent bonding was not reliably achieved with inertia welding. The deficiency points out the need for development of nondestructive testing techniques for this type of joint. Additionally, solid-state volume diffusion did not appear to be a satisfactory explanation for the inertia and friction-welding bonding mechanism

Zero-G experimental validation of a robotics-based inertia identification algorithm

Science.gov (United States)

Bruggemann, Jeremy J.; Ferrel, Ivann; Martinez, Gerardo; Xie, Pu; Ma, Ou

2010-04-01

The need to efficiently identify the changing inertial properties of on-orbit spacecraft is becoming more critical as satellite on-orbit services, such as refueling and repairing, become increasingly aggressive and complex. This need stems from the fact that a spacecraft's control system relies on the knowledge of the spacecraft's inertia parameters. However, the inertia parameters may change during flight for reasons such as fuel usage, payload deployment or retrieval, and docking/capturing operations. New Mexico State University's Dynamics, Controls, and Robotics Research Group has proposed a robotics-based method of identifying unknown spacecraft inertia properties1. Previous methods require firing known thrusts then measuring the thrust, and the velocity and acceleration changes. The new method utilizes the concept of momentum conservation, while employing a robotic device powered by renewable energy to excite the state of the satellite. Thus, it requires no fuel usage or force and acceleration measurements. The method has been well studied in theory and demonstrated by simulation. However its experimental validation is challenging because a 6- degree-of-freedom motion in a zero-gravity condition is required. This paper presents an on-going effort to test the inertia identification method onboard the NASA zero-G aircraft. The design and capability of the test unit will be discussed in addition to the flight data. This paper also introduces the design and development of an airbearing based test used to partially validate the method, in addition to the approach used to obtain reference value for the test system's inertia parameters that can be used for comparison with the algorithm results.

A method for measuring the inertia properties of rigid bodies

Science.gov (United States)

Gobbi, M.; Mastinu, G.; Previati, G.

2011-01-01

A method for the measurement of the inertia properties of rigid bodies is presented. Given a rigid body and its mass, the method allows to measure (identify) the centre of gravity location and the inertia tensor during a single test. The proposed technique is based on the analysis of the free motion of a multi-cable pendulum to which the body under consideration is connected. The motion of the pendulum and the forces acting on the system are recorded and the inertia properties are identified by means of a proper mathematical procedure based on a least square estimation. After the body is positioned on the test rig, the full identification procedure takes less than 10 min. The natural frequencies of the pendulum and the accelerations involved are quite low, making this method suitable for many practical applications. In this paper, the proposed method is described and two test rigs are presented: the first is developed for bodies up to 3500 kg and the second for bodies up to 400 kg. A validation of the measurement method is performed with satisfactory results. The test rig holds a third part quality certificate according to an ISO 9001 standard and could be scaled up to measure the inertia properties of huge bodies, such as trucks, airplanes or even ships.

Clinical inertia causing new or progression of diabetic retinopathy in type 2 diabetes: A retrospective cohort study.

Science.gov (United States)

Osataphan, Soravis; Chalermchai, Thep; Ngaosuwan, Kanchana

2017-03-01

Clinical inertia is a failure to intensify treatment according to evidence-based guidelines, and can have both short- and long-term adverse effects for type 2 diabetes (T2D). The aim of the present study was to demonstrate the effects of clinical inertia on glycemic control and diabetes-related complications. A retrospective cohort study was conducted at a university-based hospital in Thailand. Medical records were evaluated retrospectively from January 2010 to December 2014. Patients were classified into two groups: clinical inertia and non-inertia. Clinical inertia was defined as failure to initiate insulin within 3 months in patients with HbA1c ≥9 % who were already taking two oral antidiabetic agents. From 1206 records, 98 patients with mean HbA1c of 10.3 % were identified and enrolled in the study. The median follow-up time of these patients was 29.5 months and 68.4 % were classified into the clinical inertia group. The mean (± SD) HbA1c decrement in the clinical inertia and non-inertia groups was 0.82 ± 1.50 % and 3.02 ± 1.80 %, respectively, at 6 months (P inertia was associated with a significantly shorter median time to progression of diabetic retinopathy (DR); log rank test, P = 0.02 and a higher incidence of DR progression (10 vs 2.2 cases per 1000 person-months; P = 0.003). The adjusted incidence rate ratio for DR progression in the clinical inertia group was 4.92 (95 % confidence interval 1.11-21.77; P = 0.036). Being treated by general practitioners was the strongest risk factor associated with clinical inertia. Clinical inertia can cause persistently poor glycemic control and speed up the progression of DR in T2D. © 2016 Ruijin Hospital, Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

Moments of inertia and the shapes of Brownian paths

International Nuclear Information System (INIS)

Fougere, F.; Desbois, J.

1993-01-01

The joint probability law of the principal moments of inertia of Brownian paths (open or closed) is computed, using constrained path integrals and Random Matrix Theory. The case of two-dimensional paths is discussed in detail. In particular, it is shown that the ratio of the average values of the largest and smallest moments is equal to 4.99 (open paths) and 3.07 (closed paths). Results of numerical simulations are also presented, which include investigation of the relationships between the moments of inertia and the arithmetic area enclosed by a path. (authors) 28 refs., 2 figs

A new inertia weight control strategy for particle swarm optimization

Science.gov (United States)

Zhu, Xianming; Wang, Hongbo

2018-04-01

Particle Swarm Optimization is a member of swarm intelligence algorithms, which is inspired by the behavior of bird flocks. The inertia weight, one of the most important parameters of PSO, is crucial for PSO, for it balances the performance of exploration and exploitation of the algorithm. This paper proposes a new inertia weight control strategy and PSO with this new strategy is tested by four benchmark functions. The results shows that the new strategy provides the PSO with better performance.

On the origin of inertia

International Nuclear Information System (INIS)

Culetu, H.

1990-09-01

A dynamical origin to the Minkowski geometry is suggested in this paper. The Minkowski internal (-x α x α ) 1/2 plays the role of the fifth dimension. We found the energy-momentum vector p μ (associated to a ''motion in scale'') of a ''free'' relativistic particle in position-dependent. When x i and ''t'' are not independent, we are naturally led to the law of inertia. (author). 10 refs

Patient inertia and the status quo bias: when an inferior option is preferred.

Science.gov (United States)

Suri, Gaurav; Sheppes, Gal; Schwartz, Carey; Gross, James J

2013-09-01

Medical noncompliance is a major public-health problem. One potential source of this noncompliance is patient inertia. It has been hypothesized that one cause of patient inertia might be the status quo bias-which is the tendency to select the default choice among a set of options. To test this hypothesis, we created a laboratory analogue of the decision context that frequently occurs in situations involving patient inertia, and we examined whether participants would stay with a default option even when it was clearly inferior to other available options. Specifically, in Studies 1 and 2, participants were given the option to reduce their anxiety while waiting for an electric shock. When doing nothing was the status quo option, participants frequently did not select the option that would reduce their anxiety. In Study 3, we demonstrated a simple way to overcome status quo bias in a context relevant to patient inertia.

Uncovering the inertia of dislocation motion and negative mechanical response in crystals.

Science.gov (United States)

Tang, Yizhe

2018-01-09

Dislocations are linear defects in crystals and their motion controls crystals' mechanical behavior. The dissipative nature of dislocation propagation is generally accepted although the specific mechanisms are still not fully understood. The inertia, which is undoubtedly the nature of motion for particles with mass, seems much less convincing for configuration propagation. We utilize atomistic simulations in conditions that minimize dissipative effects to enable uncovering of the hidden nature of dislocation motion, in three typical model metals Mg, Cu and Ta. We find that, with less/no dissipation, dislocation motion is under-damped and explicitly inertial at both low and high velocities. The inertia of dislocation motion is intrinsic, and more fundamental than the dissipative nature. The inertia originates from the kinetic energy imparted from strain energy and stored in the moving core. Peculiar negative mechanical response associated with the inertia is also discovered. These findings shed light on the fundamental nature of dislocation motion, reveal the underlying physics, and provide a new physical explanation for phenomena relevant to high-velocity dislocations.

Inertia-dependent dynamics of three-dimensional vesicles and red blood cells in shear flow.

Science.gov (United States)

Luo, Zheng Yuan; Wang, Shu Qi; He, Long; Xu, Feng; Bai, Bo Feng

2013-10-28

A three-dimensional (3D) simulation study of the effect of inertia on the dynamics of vesicles and red blood cells (RBCs) has not been reported. Here, we developed a 3D model based on the front tracking method to investigate how inertia affects the dynamics of spherical/non-spherical vesicles and biconcave-shaped RBCs with the Reynolds number ranging from 0.1 to 10. The results showed that inertia induced non-spherical vesicles transitioned from tumbling to swinging, which was not observed in previous 2D models. The critical viscosity ratio of inner/outer fluids for the tumbling–swinging transition remarkably increased with an increasing Reynolds number. The deformation of vesicles was greatly enhanced by inertia, and the frequency of tumbling and tank-treading was significantly decreased by inertia. We also found that RBCs can transit from tumbling to steady tank-treading through the swinging regime when the Reynolds number increased from 0.1 to 10. These results indicate that inertia needs to be considered at moderate Reynolds number (Re ~ 1) in the study of blood flow in the human body and the flow of deformable particle suspension in inertial microfluidic devices. The developed 3D model provided new insights into the dynamics of RBCs under shear flow, thus holding great potential to better understand blood flow behaviors under normal/disease conditions.

Analysis on the influence of the pump start transient performance with different inertia impeller

International Nuclear Information System (INIS)

Tang, Y; Cheng, J; Liu, E H; Tang, L D

2012-01-01

Centrifugal pump start-up time is very short, in the boot process, the instantaneous head and flow will have an impact role to the pipeline, and however the moment of inertia is one of the main factors affecting centrifugal pump boot acceleration. We analyzed the pump start-up transient characteristics with the different moment of inertia of the impeller corresponding to the different materials, there are three different moment of inertia of the impeller have been selected. At first, we use the 'Flowmaster' fluid system simulation software do the outer characteristics simulation to the selected-model, get the time - flow and the time - speed curve. Then, do the experiments research in the process when pump start-up, and compare with the simulation result. At last use the outer characteristics simulation result as the boundary, using the ANASYS CFX software do the transient simulation to the three groups with different inertia pump impeller, and draw the pressure distribution picture. In according to the analysis, we can confirm that the impact of inertia is one of the factors in the stability during the pump star, and we can get that the greater moment of inertia, the longer the boot stable. We also can get that combined Flowmaster with ANSYS can solved engineering practice problem in fluid system conveniently, and take it easy to solve the similar problem.

More about the moment of inertia of Mars

International Nuclear Information System (INIS)

Kaula, W.M.; Sleep, N.H.; Phillips, R.J.

1989-01-01

The maximum allowable mean moment-of-inertia I of Mars is 0.3650 ·MR 2 because the rate-of-adjustment of the rotation axis is much faster than the rate-of-generation of density heterogeneities, as with any planet. But Mars differs from the other terrestrial planets in that its gravity field is rougher, in the sense of stress-difference implication, and its global tectonics is dominated by one feature, centered on the Tharsis Plateau. Plausible tectonic models of Mars require generation and support that are almost axially symmetric about Tharsis. Hence, unlike other terrestrial planets, Mars likely has two non-hydrostatic components of moments-of-inertia that are nearly equal, and the most probable value of I/MR 2 is slightly less than 0.3650

Four-dimensional Hooke's law can encompass linear elasticity and inertia

International Nuclear Information System (INIS)

Antoci, S.; Mihich, L.

1999-01-01

The question is examined whether the formally straightforward extension of Hooke's time-honoured stress-strain relation to the four dimensions of special and of general relativity can make physical sense. The four-dimensional Hooke law is found able to account for the inertia of matter; in the flat-space, slow-motion approximation the field equations for the displacement four-vector field ξ i can encompass both linear elasticity and inertia. In this limit one just recovers the equations of motion of the classical theory of elasticity

Calculation of nuclear moment of inertia with proper treatment of pairing interaction

International Nuclear Information System (INIS)

Tazaki, S.; Ando, Y.; Hasegawa, M.

1997-01-01

An attempt to calculate nuclear moments of inertia treating the pairing interaction exactly is reported. As usual, hamiltonian is composed of the Nilsson's singleparticle energies and the pairing interaction, but the eigenstates and the eigenvalues are calculated exactly in a realistic, sufficiently large model space. The method of calculating the moment of inertia is presented. (author)

The influence of electron inertia on the modulational instability of ion-acoustic waves

International Nuclear Information System (INIS)

Parkes, E.J.

1993-01-01

The influence of electron inertia, ion streaming and weak relativistic effects on the modulational instability of ion-acoustic waves in a collisionless unmagnetized plasma is investigated. The derivative expansion method is used to derive a nonlinear Schroedinger equation, from which an instability criterion is deduced. When electron inertia is ignored, ion streaming and weak relativistic effects have little effect on the instability criterion. It is shown that when electron inertia is taken into account, the instability criterion is sensitive to weakly relativistic ion streaming, but not to the ratio of electron mass to ion mass. (Author)

Importance of upper-limb inertia in calculating concentric bench press force.

Science.gov (United States)

Rambaud, Olivier; Rahmani, Abderrahmane; Moyen, Bernard; Bourdin, Muriel

2008-03-01

The purpose of this study was to investigate the influence of upper-limb inertia on the force-velocity relationship and maximal power during concentric bench press exercise. Reference peak force values (Fpeakp) measured with a force plate positioned below the bench were compared to those measured simultaneously with a kinematic device fixed on the barbell by taking (Fpeakt) or not taking (Fpeakb) upper-limb inertia into account. Thirteen men (27.8 +/- 4.1 years, 184.6 +/- 5.5 cm, 99.5 +/- 18.6 kg) performed all-out concentric bench press exercise against 8 loads ranging between 7 and 74 kg. The results showed that for each load, Fpeakb was significantly less than Fpeakp (P force (F0), maximal velocity (V0), optimal velocity (Vopt), and maximal power (Pmax), extrapolated from the force- and power-velocity relationships determined with the kinematic device, were significantly underestimated when upper-limb inertia was ignored. The results underline the importance of taking account of the total inertia of the moving system to ensure precise evaluation of upper-limb muscular characteristics in all-out concentric bench press exercise with a kinematic device. A major application of this study would be to develop precise upper-limb muscular characteristic evaluation in laboratory and field conditions by using a simple and cheap kinematic device.

On the origin of the inertia: The modified Newtonian dynamics theory

International Nuclear Information System (INIS)

Gine, Jaume

2009-01-01

It is shown that the identity between inertial mass and gravitational mass is an assumption to establish the equivalence principle. In the context of Sciama's inertia theory, the identity between the inertial mass and the gravitational mass is discussed and a certain condition which must be experimentally satisfied is given. The inertial force proposed by Sciama, in a simple case, is derived from Assis' inertia theory based in the introduction of a Weber type force. The origin of the inertial force is totally justified taking into account that the Weber force is, in fact, an approximation of a simple retarded potential, see [Gine J. On the origin of the anomalous precession of Mercury's perihelion. . Gine J. On the origin of deflection of the light. Chaos, Solitons and Fractals 2008;35(1):1-6]. The way how the inertial forces are also derived from some solutions of the general relativistic equations is presented. We wonder whether the theory of inertia of Assis is included in the framework the General Relativity. In the context of the inertia developed in the present paper, we establish the relation between the constant acceleration a 0 , that appears in the classical modified Newtonian dynamics (MOND) theory, with the Hubble constant H 0 , i.e. a 0 ∼ cH 0 .

Grid Frequency Support by Single-Phase Electric Vehicles Employing an Innovative Virtual Inertia Controller

DEFF Research Database (Denmark)

Rezkalla, Michel M.N.; Zecchino, Antonio; Pertl, Michael

2016-01-01

The displacement of conventional generation by converter connected resources reduces the available rotational inertia in the power system, which leads to faster frequency dynamics and consequently a less stable frequency behavior. Virtual inertia, employing energy storage systems, could be used...... of adjusting the battery charging process (i.e., power flow) according to pre-defined algorithms. On the other hand, in case of islanded operation (i.e., low inertia), some of the EV's technical constraints might cause oscillations. This study presents two control algorithms which show that the EVs are capable...... of providing virtual inertia support. The first controller employs a traditional droop control, while the second one is equipped with an innovative control algorithm to eliminate likely oscillations. It is shown that, the proposed innovative control algorithm compared to the traditional droop control, assures...

Under-treatment of type 2 diabetes: Causes and outcomes of clinical inertia.

Science.gov (United States)

Bailey, Clifford J

2016-12-01

To assess the impact of clinical inertia on type 2 diabetes (T2D) care. PubMed database search from January 2000 until December 2015. Clinical inertia, defined as resistance to initiate or intensify treatment in a patient not at the evidence-based glycated haemoglobin goal, is conservatively estimated to occur in at least 25% of patients with T2D. Consequently, many patients with diagnosed and treated T2D experience extended periods, in some cases years, of ineffectively controlled hyperglycaemia, potentially causing serious microvascular and macrovascular harm. Delayed treatment does not appear to be specific to primary care, but also occurs in the specialist setting. The causes of clinical inertia appear to be complex, involving both reasonable and unacceptable delays on the part of the clinician and poor compliance with treatment regimens on the part of the patient. Evidence suggests that the clinical and organisational context may be particularly important in reinforcing clinical inertia, notably the increasingly severe time constraints for diagnosis and management of multiple morbidities, consideration of complex guidelines, assessment of cost and appreciation of patient concerns, all of which may hamper prioritisation of the important issue of under-treatment. Since the pharmacotherapeutic tools for good control of blood glucose exist in all advanced healthcare systems, initiatives to address the important and widespread problem of clinical inertia may require focused campaigns that encourage attention to guideline recommendations and their adaptation for individualised care. © 2016 John Wiley & Sons Ltd.

An improved method in the measurement of the moment of inertia

Energy Technology Data Exchange (ETDEWEB)

Peng, Jun, E-mail: pengjun@cimm.com.cn [Key Laboratory for Metrology, Changcheng Institute of Metrology and Measurement (CIMM) Beijing (China); Zhang, Li, E-mail: zhangli@cimm.com.cn [Key Laboratory for Metrology, Changcheng Institute of Metrology and Measurement (CIMM) Beijing (China); School of Instrumentation Science and Opto-electronics Engineering, Beihang University, Beijing (China)

2016-06-28

The moment of inertia calibration system is developed by Changcheng Institute of Metrology and Measurement (CIMM). Rotation table - torsional spring system is used to generate angular vibration, and laser vibrometer is used to measure rotational angle and the vibration period. The object to be measured is mounted on the top of the rotation table. The air-bearing system is elaborately manufactured which reduce the friction of the angular movement and increase measurement accuracy. Heterodyne laser interferometer collaborates with column diffraction grating is used in the measurement of angular movement. Experiment shows the method of measuring oscillating angle and period introduced in this paper is stable and the time resolution is high. When the air damping effect can’t be neglected in moment of inertia measurement, the periodic waveform area ratio method is introduced to calculate damping ratio and obtain the moment of inertia.

Einstein's equivalence principle instead of the inertia forces

International Nuclear Information System (INIS)

Herreros Mateos, F.

1997-01-01

In this article I intend to show that Einstein's equivalence principle substitutes advantageously the inertia forces in the study and resolution of problems in which non-inertial systems appear. (Author) 13 refs

Topology optimization of inertia driven dosing units

DEFF Research Database (Denmark)

Andreasen, Casper Schousboe

2017-01-01

This paper presents a methodology for optimizing inertia driven dosing units, sometimes referred to as eductors, for use in small scale flow applications. The unit is assumed to operate at low to moderate Reynolds numbers and under steady state conditions. By applying topology optimization...

Frequency Stability Improvement of Low Inertia Systems Using Synchronous Condensers

DEFF Research Database (Denmark)

Nguyen, Ha Thi; Yang, Guangya; Nielsen, Arne Hejde

2016-01-01

of converter interfaced components (wind turbine, HVDC, and Photovoltaic) may have negative effects on the stability of the power system. These components do not have enough inertia response to control frequency excursion, so the power grid can depend on few synchronous machines for frequency regulation...... and reduce the system inertia. Consequently, the frequency stability of the system will be easily jeopardized. To address these issues, the paper studies frequency characteristics of future Western Danish renewable-based system that uses a majority of wind turbine generators. Different scenarios of wind...

Transient and steady state behaviour of elasto–aerodynamic air foil bearings, considering bump foil compliance and top foil inertia and flexibility: A numerical investigation

DEFF Research Database (Denmark)

Nielsen, Bo Bjerregaard; Santos, Ilmar F.

2017-01-01

utilise two types of eight-node isoparametric elements. The rotor is modelled as a rigid body without rotational inertia, i.e. as a journal. The bump foil is included via a bilinear version of the simple elastic foundation model. This paper introduces the bilinear simple elastic foundation model, which...

Hydrodynamic interactions of two nearly touching Brownian spheres in a stiff potential: Effect of fluid inertia

International Nuclear Information System (INIS)

Radiom, Milad; Ducker, William; Robbins, Brian; Paul, Mark

2015-01-01

The hydrodynamic interaction of two closely spaced micron-scale spheres undergoing Brownian motion was measured as a function of their separation. Each sphere was attached to the distal end of a different atomic force microscopy cantilever, placing each sphere in a stiff one-dimensional potential (0.08 Nm −1 ) with a high frequency of thermal oscillations (resonance at 4 kHz). As a result, the sphere’s inertial and restoring forces were significant when compared to the force due to viscous drag. We explored interparticle gap regions where there was overlap between the two Stokes layers surrounding each sphere. Our experimental measurements are the first of their kind in this parameter regime. The high frequency of oscillation of the spheres means that an analysis of the fluid dynamics would include the effects of fluid inertia, as described by the unsteady Stokes equation. However, we find that, for interparticle separations less than twice the thickness of the wake of the unsteady viscous boundary layer (the Stokes layer), the hydrodynamic interaction between the Brownian particles is well-approximated by analytical expressions that neglect the inertia of the fluid. This is because elevated frictional forces at narrow gaps dominate fluid inertial effects. The significance is that interparticle collisions and concentrated suspensions at this condition can be modeled without the need to incorporate fluid inertia. We suggest a way to predict when fluid inertial effects can be ignored by including the gap-width dependence into the frequency number. We also show that low frequency number analysis can be used to determine the microrheology of mixtures at interfaces

A review of short naps and sleep inertia: do naps of 30 min or less really avoid sleep inertia and slow-wave sleep?

Science.gov (United States)

Hilditch, Cassie J; Dorrian, Jillian; Banks, Siobhan

2017-04-01

Napping is a widely used countermeasure to sleepiness and impaired performance caused by sleep loss and circadian pressure. Sleep inertia, the period of grogginess and impaired performance experienced after waking, is a potential side effect of napping. Many industry publications recommend naps of 30 min or less to avoid this side effect. However, the evidence to support this advice is yet to be thoroughly reviewed. Electronic databases were searched, and defined criteria were applied to select articles for review. The review covers literature on naps of 30 min or less regarding (a) sleep inertia, (b) slow-wave sleep (SWS) and (c) the relationship between sleep inertia and SWS. The review found that although the literature on short afternoon naps is relatively comprehensive, there are very few studies on naps of 30 min or less at night. Studies have mixed results regarding the onset of SWS and the duration and severity of sleep inertia following short naps, making guidelines regarding their use unclear. The varying results are likely due to differing sleep/wake profiles before the nap of interest and the time of the day at waking. The review highlights the need to have more detailed guidelines about the implementation of short naps according to the time of the day and prior sleep/wake history. Without this context, such a recommendation is potentially misleading. Further research is required to better understand the interactions between these factors, especially at night, and to provide more specific recommendations. Copyright © 2017 Elsevier B.V. All rights reserved.

Surface energy budget and thermal inertia at Gale Crater: Calculations from ground-based measurements.

Science.gov (United States)

Martínez, G M; Rennó, N; Fischer, E; Borlina, C S; Hallet, B; de la Torre Juárez, M; Vasavada, A R; Ramos, M; Hamilton, V; Gomez-Elvira, J; Haberle, R M

2014-08-01

The analysis of the surface energy budget (SEB) yields insights into soil-atmosphere interactions and local climates, while the analysis of the thermal inertia ( I ) of shallow subsurfaces provides context for evaluating geological features. Mars orbital data have been used to determine thermal inertias at horizontal scales of ∼10 4  m 2 to ∼10 7  m 2 . Here we use measurements of ground temperature and atmospheric variables by Curiosity to calculate thermal inertias at Gale Crater at horizontal scales of ∼10 2  m 2 . We analyze three sols representing distinct environmental conditions and soil properties, sol 82 at Rocknest (RCK), sol 112 at Point Lake (PL), and sol 139 at Yellowknife Bay (YKB). Our results indicate that the largest thermal inertia I  = 452 J m -2  K -1  s -1/2 (SI units used throughout this article) is found at YKB followed by PL with I  = 306 and RCK with I  = 295. These values are consistent with the expected thermal inertias for the types of terrain imaged by Mastcam and with previous satellite estimations at Gale Crater. We also calculate the SEB using data from measurements by Curiosity's Rover Environmental Monitoring Station and dust opacity values derived from measurements by Mastcam. The knowledge of the SEB and thermal inertia has the potential to enhance our understanding of the climate, the geology, and the habitability of Mars.

Moments of Inertia: Uninhabited Aerial Vehicle (UAV) Dryden Remotely Operated Integrated Drone (DROID)

Science.gov (United States)

Haro, Helida C.

2010-01-01

The objective of this research effort is to determine the most appropriate, cost efficient, and effective method to utilize for finding moments of inertia for the Uninhabited Aerial Vehicle (UAV) Dryden Remotely Operated Integrated Drone (DROID). A moment is a measure of the body's tendency to turn about its center of gravity (CG) and inertia is the resistance of a body to changes in its momentum. Therefore, the moment of inertia (MOI) is a body's resistance to change in rotation about its CG. The inertial characteristics of an UAV have direct consequences on aerodynamics, propulsion, structures, and control. Therefore, it is imperative to determine the precise inertial characteristics of the DROID.

Moments of Inertia - Uninhabited Aerial Vehicle (UAV) Dryden Remotely Operated Integrated Drone (DROID)

Science.gov (United States)

Haro, Helida C.

2010-01-01

The objective of this research effort is to determine the most appropriate, cost efficient, and effective method to utilize for finding moments of inertia for the Uninhabited Aerial Vehicle (UAV) Dryden Remotely Operated Integrated Drone (DROID). A moment is a measure of the body's tendency to turn about its center of gravity (CG) and inertia is the resistance of a body to changes in its momentum. Therefore, the moment of inertia (MOI) is a body's resistance to change in rotation about its CG. The inertial characteristics of an UAV have direct consequences on aerodynamics, propulsion, structures, and control. Therefore, it is imperative to determine the precise inertial characteristics of the DROID.

Neutron-proton isovector pairing effect on the nuclear moment of inertia

International Nuclear Information System (INIS)

Mokhtari, D.; Ami, I.; Fellah, M.; Allal, N.H.

2008-01-01

The neutron-proton (n-p) isovector pairing effect on the nuclear moment of inertia has been studied within the framework of the BCS approximation. An analytical expression of the moment of inertia, that explicitly depends upon the n-p pairing, has been established using the Inglis cranking model. The model was first tested numerically for nuclei such as N = Z and whose experimental values of the moment of inertia are known (i.e. such as 16 ≤ Z ≤ 40). It has been shown that the n-p pairing effect is non-negligible and clearly improves the theoretical predictions when compared to those of the pairing between like particles. Secondly, predictions have been established for even-even proton-rich rare-earth nuclei. It has been shown that the n-p pairing effect is non-negligible when N = Z and rapidly decreases with increasing values of (N-Z). (author)

[INERTIA study: Clinical inertia in non-insulinized patients on oral hypoglycemic treatment. A study in Spanish primary and specialty care settings].

Science.gov (United States)

González-Clemente, José Miguel; Font, Beatriu; Lahoz, Raquel; Llauradó, Gemma; Gambús, Gemma

2014-06-06

To study clinical inertia in the management of oral hypoglycemic agents (OHA) in non-insulin treated patients with type 2 diabetes mellitus (T2DM) in Spain. Epidemiological, cross-sectional, retrospective (2 years), multicenter study. Clinical inertia was measured as the total number of patients without OHA treatment intensification divided by the total number of patients with inadequate HbA1c values (≥7%), multiplied by 100. Total clinical inertia (TCI) was the absence of OHA treatment intensification in all visits with a HbA1c≥7% values in the previous 2 years; partial clinical inertia (PCI) occurred when this absence only occurred in some of these visits. We assessed OHA treatment compliance with the Morisky-Green test. We included 2,971 patients, 1,416 adequately controlled (HbA1c<7%) and 1,555 inadequately controlled (HbA1c≥7%). PCI prevalence was 52.5%(95% confidence interval [95% CI] 52.4-52.6%) while TCI prevalence was 12.8% (95% CI 12.2-13.8%). PCI was lower in patients adequately controlled as compared with those inadequately controlled (31.4% vs. 71.8%; P<.001). PCI was associated with sedentary lifestyle, hypertension and higher prevalence of micro and macrovascular complications. Only 38.0% of patients were compliant with the OHA treatment, being this percentage even lower in subjects with ICP. Two variables were independently associated with ICP: female sex (odds ratio [OR] 1.43; 95% CI 1.09-1.86%) and a shorter duration of DM2 (OR 0.98; 95% CI 0.95-0.99). One out of 2 patients with T2DM and treated with OHA without insulin suffer from PCI. Only 4 out of 10 patients are compliant with OHA treatment. Female sex and a shorter duration of T2DM are independently associated with PCI. Copyright © 2012 Elsevier España, S.L. All rights reserved.

Comparison between Synthetic Inertia and Fast Frequency Containment Control Based on Single Phase EVs in a Microgrid

DEFF Research Database (Denmark)

Rezkalla, Michel M.N.; Zecchino, Antonio; Martinenas, Sergejus

2017-01-01

The increasing share of distributed and inertia-less resources entails an upsurge in balancing and system stabilisation services. In particular, the displacement of conventional generation reduces the available rotational inertia in the power system, leading to high interest in synthetic inertia....... The interdependency between frequency containment and synthetic inertia control on the transient frequency variation is shown analytically. The capabilities and limits of series produced EVs in providing such services are investigated, first on a simulation based approach and subsequently by using real hardware...

Explicit expression for effective moment of inertia of RC beams

Directory of Open Access Journals (Sweden)

K.A. Patel

Full Text Available AbstractDeflection is an important design parameter for structures subjected to service load. This paper provides an explicit expression for effective moment of inertia considering cracking, for uniformly distributed loaded reinforced concrete (RC beams. The proposed explicit expression can be used for rapid prediction of short-term deflection at service load. The explicit expression has been obtained from the trained neural network considering concrete cracking, tension stiffening and entire practical range of reinforcement. Three significant structural parameters have been identified that govern the change in effective moment of inertia and therefore deflection. These three parameters are chosen as inputs to train neural network. The training data sets for neural network are generated using finite element software ABAQUS. The explicit expression has been validated for a number of simply supported and continuous beams and it is shown that the predicted deflections have reasonable accuracy for practical purpose. A sensitivity analysis has been performed, which indicates substantial dependence of effective moment of inertia on the selected input parameters.

The effect of rotatory inertia on the dynamic response of cantilever structures

International Nuclear Information System (INIS)

Lin, Y.J.; Hadjian, A.H.

1977-01-01

For the dynamic response of cantilever beams, the error introduced by the bending theory becomes significant as the ratio of the radius of gyration to the beam length (r/l), exceeds 0.1. In this case, the use of Timoshenko's beam equation becomes more appropriate. This equation includes, in addition to the bending effects, both shear deformation and rotatory inertia effects. In the discrete modeling of beam elements, both the shear deformation and rotatory inertia terms play roles in the mass matrix, while only the shear deformation terms appear in the stiffness matrix. The effect of rotatory inertia on the frequencies and dynamic response of cantilever structures subjected to lateral earthquake excitation is thoroughly studied. This is done by using both the consistent and lumped mass matrices and analytical solution. The beam support is treated either as fixed or elastically restrained to consider soil-structure interaction effects. Since containment structures can be treated as hollow beams, the cantilever beam of uniform cross-section is examined first. For those cases where the ratio of the radius of gyration to beam length lies within the range of interest, all the solutions show that rotatory inertia has an important impact on both the frequencies (other than that of the fundamental mode) and the vertical component of the response. However, as the soil-structure interaction effects become significant rotatory inertia effects become secondary. For shear wall structures used in nuclear power plants, the floors may be treated as rigid diaphragms and the shear walls between floors are usually considered to be beam elements of uniform cross-section

Sleep inertia, sleep homeostatic and circadian influences on higher-order cognitive functions.

Science.gov (United States)

Burke, Tina M; Scheer, Frank A J L; Ronda, Joseph M; Czeisler, Charles A; Wright, Kenneth P

2015-08-01

Sleep inertia, sleep homeostatic and circadian processes modulate cognition, including reaction time, memory, mood and alertness. How these processes influence higher-order cognitive functions is not well known. Six participants completed a 73-day-long study that included two 14-day-long 28-h forced desynchrony protocols to examine separate and interacting influences of sleep inertia, sleep homeostasis and circadian phase on higher-order cognitive functions of inhibitory control and selective visual attention. Cognitive performance for most measures was impaired immediately after scheduled awakening and improved during the first ~2-4 h of wakefulness (decreasing sleep inertia); worsened thereafter until scheduled bedtime (increasing sleep homeostasis); and was worst at ~60° and best at ~240° (circadian modulation, with worst and best phases corresponding to ~09:00 and ~21:00 hours, respectively, in individuals with a habitual wake time of 07:00 hours). The relative influences of sleep inertia, sleep homeostasis and circadian phase depended on the specific higher-order cognitive function task examined. Inhibitory control appeared to be modulated most strongly by circadian phase, whereas selective visual attention for a spatial-configuration search task was modulated most strongly by sleep inertia. These findings demonstrate that some higher-order cognitive processes are differentially sensitive to different sleep-wake regulatory processes. Differential modulation of cognitive functions by different sleep-wake regulatory processes has important implications for understanding mechanisms contributing to performance impairments during adverse circadian phases, sleep deprivation and/or upon awakening from sleep. © 2015 European Sleep Research Society.

Testing for clinical inertia in medication treatment of bipolar disorder.

Science.gov (United States)

Hodgkin, Dominic; Merrick, Elizabeth L; O'Brien, Peggy L; McGuire, Thomas G; Lee, Sue; Deckersbach, Thilo; Nierenberg, Andrew A

2016-11-15

Clinical inertia has been defined as lack of change in medication treatment at visits where a medication adjustment appears to be indicated. This paper seeks to identify the extent of clinical inertia in medication treatment of bipolar disorder. A second goal is to identify patient characteristics that predict this treatment pattern. Data describe 23,406 visits made by 1815 patients treated for bipolar disorder during the STEP-BD practical clinical trial. Visits were classified in terms of whether a medication adjustment appears to be indicated, and also whether or not one occurred. Multivariable regression analyses were conducted to find which patient characteristics were predictive of whether adjustment occurred. 36% of visits showed at least 1 indication for adjustment. The most common indications were non-response to medication, side effects, and start of a new illness episode. Among visits with an indication for adjustment, no adjustment occurred 19% of the time, which may be suggestive of clinical inertia. In multivariable models, presence of any indication for medication adjustment was a predictor of receiving one (OR=1.125, 95% CI =1.015, 1.246), although not as strong as clinical status measures. The associations observed are not necessarily causal, given the study design. The data also lack information about physician-patient communication. Many patients remained on the same medication regimen despite indications of side effects or non-response to treatment. Although lack of adjustment does not necessarily reflect clinical inertia in all cases, the reasons for this treatment pattern merit further examination. Copyright © 2016 Elsevier B.V. All rights reserved.

Physics in schools: the geometrical behaviour of large objects moving with relativistic velocities

Energy Technology Data Exchange (ETDEWEB)

Ormicki, M

1977-01-01

In the special relativity theory time and place are transformed from one inertia system to a second inertia system which is in motion in relation to the first, using the Lorentz transformation equations. Since in general the Lorentz abbreviations are only used for distances between a number of individual points, this may lead to a lack of understanding of how larger objects behave geometrically when they have relative velocities to each other. A model is considered to illustrate the operation of the Lorentz transformation in such cases, with results which can be handled on a mini-computer.

Sense of place and place identity: review of neuroscientific evidence.

Science.gov (United States)

Lengen, Charis; Kistemann, Thomas

2012-09-01

The aim of this review is to bring the phenomenological sense of place approach together with current results from neuroscience. We searched in neuroscientific literature for ten dimensions which were beforehand identified to be important in a phenomenological sense of place/place identity model: behaviour, body, emotion, attention, perception, memory, orientation, spirituality, meaning/value and culture/sociality. Neuroscience has identified many neurobiological correlates of phenomenological observations concerning sense of place. The human brain comprises specific and specialised structures and processes to perceive, memorise, link, assess and use spatial information. Specific parts (hippocampus, entorhinal, parahippocampal and parietal cortex), subregions (parahippocampal place area, lingual landmark area), and cells (place cells, grid cells, border cells, head direction cells) have been identified, their specific function could be understood and their interaction traced. Neuroscience has provided evidence that place constitutes a distinct dimension in neuronal processing. This reinforces the phenomenological argumentation of human geography and environmental psychology. Copyright © 2012 Elsevier Ltd. All rights reserved.

Performance Guaranteed Inertia Emulation forDiesel-Wind System Feed Microgrid via ModelReference Control

Energy Technology Data Exchange (ETDEWEB)

Melin, Alexander M. [ORNL; Zhang, Yichen [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Djouadi, Seddik [University of Tennessee, Knoxville (UTK), Department of Electrical Engineering and Computer Science; Olama, Mohammed M. [ORNL

2017-04-01

In this paper, a model reference control based inertia emulation strategy is proposed. Desired inertia can be precisely emulated through this control strategy so that guaranteed performance is ensured. A typical frequency response model with parametrical inertia is set to be the reference model. A measurement at a specific location delivers the information of disturbance acting on the diesel-wind system to the referencemodel. The objective is for the speed of the diesel-wind system to track the reference model. Since active power variation is dominantly governed by mechanical dynamics and modes, only mechanical dynamics and states, i.e., a swing-engine-governor system plus a reduced-order wind turbine generator, are involved in the feedback control design. The controller is implemented in a three-phase diesel-wind system feed microgrid. The results show exact synthetic inertia is emulated, leading to guaranteed performance and safety bounds.

On the macroscopic modeling of dilute emulsions under flow in the presence of particle inertia

Science.gov (United States)

Mwasame, Paul M.; Wagner, Norman J.; Beris, Antony N.

2018-03-01

Recently, Mwasame et al. ["On the macroscopic modeling of dilute emulsions under flow," J. Fluid Mech. 831, 433 (2017)] developed a macroscopic model for the dynamics and rheology of a dilute emulsion with droplet morphology in the limit of negligible particle inertia using the bracket formulation of non-equilibrium thermodynamics of Beris and Edwards [Thermodynamics of Flowing Systems: With Internal Microstructure (Oxford University Press on Demand, 1994)]. Here, we improve upon that work to also account for particle inertia effects. This advance is facilitated by using the bracket formalism in its inertial form that allows for the natural incorporation of particle inertia effects into macroscopic level constitutive equations, while preserving consistency to the previous inertialess approximation in the limit of zero inertia. The parameters in the resultant Particle Inertia Thermodynamically Consistent Ellipsoidal Emulsion (PITCEE) model are selected by utilizing literature-available mesoscopic theory for the rheology at small capillary and particle Reynolds numbers. At steady state, the lowest level particle inertia effects can be described by including an additional non-affine inertial term into the evolution equation for the conformation tensor, thereby generalizing the Gordon-Schowalter time derivative. This additional term couples the conformation and vorticity tensors and is a function of the Ohnesorge number. The rheological and microstructural predictions arising from the PITCEE model are compared against steady-shear simulation results from the literature. They show a change in the signs of the normal stress differences that is accompanied by a change in the orientation of the major axis of the emulsion droplet toward the velocity gradient direction with increasing Reynolds number, capturing the two main signatures of particle inertia reported in simulations.

Sleep inertia during a simulated 6-h on/6-h off fixed split duty schedule.

Science.gov (United States)

Hilditch, Cassie J; Short, Michelle; Van Dongen, Hans P A; Centofanti, Stephanie A; Dorrian, Jillian; Kohler, Mark; Banks, Siobhan

Sleep inertia is a safety concern for shift workers returning to work soon after waking up. Split duty schedules offer an alternative to longer shift periods, but introduce additional wake-ups and may therefore increase risk of sleep inertia. This study investigated sleep inertia across a split duty schedule. Sixteen participants (age range 21-36 years; 10 females) participated in a 9-day laboratory study with two baseline nights (10 h time in bed, [TIB]), four 24-h periods of a 6-h on/6-h off split duty schedule (5-h TIB in off period; 10-h TIB per 24 h) and two recovery nights. Two complementary rosters were evaluated, with the timing of sleep and wake alternating between the two rosters (2 am/2 pm wake-up roster versus 8 am/8 pm wake-up roster). At 2, 17, 32 and 47 min after scheduled awakening, participants completed an 8-min inertia test bout, which included a 3-min psychomotor vigilance test (PVT-B), a 3-min Digit-Symbol Substitution Task (DSST), the Karolinska Sleepiness Scale (KSS), and the Samn-Perelli Fatigue Scale (SP-Fatigue). Further testing occurred every 2 h during scheduled wakefulness. Performance was consistently degraded and subjective sleepiness/fatigue was consistently increased during the inertia testing period as compared to other testing times. Morning wake-ups (2 am and 8 am) were associated with higher levels of sleep inertia than later wake-ups (2 pm and 8 pm). These results suggest that split duty workers should recognise the potential for sleep inertia after waking, especially during the morning hours.

Color Feature-Based Object Tracking through Particle Swarm Optimization with Improved Inertia Weight.

Science.gov (United States)

Guo, Siqiu; Zhang, Tao; Song, Yulong; Qian, Feng

2018-04-23

This paper presents a particle swarm tracking algorithm with improved inertia weight based on color features. The weighted color histogram is used as the target feature to reduce the contribution of target edge pixels in the target feature, which makes the algorithm insensitive to the target non-rigid deformation, scale variation, and rotation. Meanwhile, the influence of partial obstruction on the description of target features is reduced. The particle swarm optimization algorithm can complete the multi-peak search, which can cope well with the object occlusion tracking problem. This means that the target is located precisely where the similarity function appears multi-peak. When the particle swarm optimization algorithm is applied to the object tracking, the inertia weight adjustment mechanism has some limitations. This paper presents an improved method. The concept of particle maturity is introduced to improve the inertia weight adjustment mechanism, which could adjust the inertia weight in time according to the different states of each particle in each generation. Experimental results show that our algorithm achieves state-of-the-art performance in a wide range of scenarios.

Importance of Upper-Limb Inertia in Calculating Concentric Bench Press Force

OpenAIRE

RAMBAUD, O; RAHMANI, A; MOYEN, B; BOURDIN, M

2008-01-01

The purpose of this study was to investigate the influence of upper-limb inertia on the force-velocity relationship and maximal power during concentric bench press exercise. Reference peak force values (Fpeakp) measured with a force plate positioned below the bench were compared to those measured simultaneously with a kinematic device fixed on the barbell by taking (Fpeakt) or not taking (Fpeakb) upper-limb inertia into account. Thirteen men (27.8 6 4.1 years, 184.6 6 5.5 cm, 99.5 6 18.6 kg) ...

Emergency department patients self-report higher patient inertia, hopelessness, and harmful lifestyle choices than community counterparts.

Science.gov (United States)

Joyner, JaNae; Moore, Ashley R; Mount, David L; Simmons, Debra R; Ferrario, Carlos M; Cline, David M

2012-12-01

Patient inertia is defined as an individual's failure to take responsibility for proactive lifestyle change and health conditions including hypertension. Generalized and hypertension-specific patient inertia factors were compared in 110 patients (48% women; 52% African American) from a Forsyth County, NC, emergency department (ED) and 104 community members (79% women; 70% African American) using the patient inertia-facilitated survey Patient Inertia-36. Statistically, more ED than community participants added salt to food at the table and consumed fast foods 5 to 7 days a week. ED patients agreed less often with health literacy questions about salt and BP. Hypertension associated Patient inertia questions asked of 45 ED and 40 community participants with a personal history of hypertension revealed a statistically higher sense of hopelessness surrounding blood pressure management in ED participants. Past BP control experiences of family members had statistically greater impact on community participants regarding their own BP control. Using a logistic regression model, advancing age and being surveyed in the ED were correlated with hopelessness towards BP control. ED patients make unhealthier diet choices and possess heightened generalized and hypertension-specific patient inertia including hopelessness towards controlling their BP that increases with age. These factors may contribute to this population's poor BP control, particularly self-efficacy barriers. © 2012 Wiley Periodicals, Inc.

Moment of Inertia of a Ping-Pong Ball

Science.gov (United States)

Cao, Xian-Sheng

2012-01-01

This note describes how to theoretically calculate and experimentally measure the moment of inertia of a Ping-Pong[R] ball. The theoretical calculation results are in good agreement with the experimental measurements that can be reproduced in an introductory physics laboratory.

Clinical inertia in the pharmacological management of hypertension: A systematic review and meta-analysis.

Science.gov (United States)

Milman, Tal; Joundi, Raed A; Alotaibi, Naif M; Saposnik, Gustavo

2018-06-01

Clinical Inertia is defined as "failure of health care providers to initiate or intensify therapy according to current guidelines". This phenomenon is gaining increasing attention as a major cause of clinicians' failure to adequately manage hypertension, thus leading to an increased incidence of cardiovascular events. We performed a systematic review and meta-analysis of randomized controlled trials to determine whether interventions aimed at reducing clinical inertia in the pharmacological treatment of hypertension improve blood pressure (BP) control. MEDLINE, Embase, and Cochrane Database of Systematic Reviews were searched from the start of their database until October 3, 2017 for the MESH terms "Hypertension" or "Blood Pressure", their subheadings, and the keywords "Therapeutic Inertia" or "Clinical Inertia". Studies were included if they addressed pharmacologic hypertension management, clinical inertia, were randomized controlled trials, reported an outcome describing prescriber behavior, and were available in English. Data for the included studies was extracted by two independent observers. Quality of studies was analyzed using the Cochrane Risk of Bias Assessment. Data was pooled for statistical analysis using both fixed- and random-effects models. The primary study outcome was the percentage of patients achieving blood pressure control as defined by the Joint National Committee guidelines or study authors. Of 474 citations identified, ten met inclusion criteria comprising a total of 26,871 patients, and eight were selected for meta-analysis. Interventions included Physician Education, Physician Reminders, Patient Education, Patient Reminders, Ambulatory BP Monitoring, Digital Medication Offerings, Physician Peer Visits, and Pharmacist-led Counselling. Pooled event rates revealed more patients with controlled BP in the intervention group versus control (55%, 95% CI 46-63% versus 45%, 95% CI 37-53%) and interventions significantly improved the odds of BP

Inertia and compressibility effects on density waves and Ledinegg phenomena in two-phase flow systems

International Nuclear Information System (INIS)

Ruspini, L.C.

2012-01-01

Highlights: ► The stability influence of piping fluid inertia on two-phase instabilities is studied. ► Inlet inertia stabilizes the system while outlet inertia destabilizes it. ► High-order modes oscillations are found and analyzed. ► The effect of compressible volumes in the system is studied. ► Inlet compressibility destabilizes the system while outlet comp. stabilizes it. - Abstract: The most common kind of static and dynamic two-phase flow instabilities namely Ledinegg and density wave oscillations are studied. A new model to study two-phase flow instabilities taking into account general parameters from real systems is proposed. The stability influence of external parameters such as the fluid inertia and the presence of compressible gases in the system is analyzed. High-order oscillation modes are found to be related with the fluid inertia of external piping. The occurrence of high-order modes in experimental works is analyzed with focus on the results presented in this work. Moreover, both inertia and compressibility are proven to have a high impact on the stability limits of the systems. The performed study is done by modeling the boiling channel using a one dimensional equilibrium model. An incompressible transient model describes the evolution of the flow and pressure in the non-heated regions and an ideal gas model is used to simulate the compressible volumes in the system. The use of wavelet decomposition analysis is proven to be an efficient tool in stability analysis of several frequencies oscillations.

Self-similarity of solitary waves on inertia-dominated falling liquid films.

Science.gov (United States)

Denner, Fabian; Pradas, Marc; Charogiannis, Alexandros; Markides, Christos N; van Wachem, Berend G M; Kalliadasis, Serafim

2016-03-01

We propose consistent scaling of solitary waves on inertia-dominated falling liquid films, which accurately accounts for the driving physical mechanisms and leads to a self-similar characterization of solitary waves. Direct numerical simulations of the entire two-phase system are conducted using a state-of-the-art finite volume framework for interfacial flows in an open domain that was previously validated against experimental film-flow data with excellent agreement. We present a detailed analysis of the wave shape and the dispersion of solitary waves on 34 different water films with Reynolds numbers Re=20-120 and surface tension coefficients σ=0.0512-0.072 N m(-1) on substrates with inclination angles β=19°-90°. Following a detailed analysis of these cases we formulate a consistent characterization of the shape and dispersion of solitary waves, based on a newly proposed scaling derived from the Nusselt flat film solution, that unveils a self-similarity as well as the driving mechanism of solitary waves on gravity-driven liquid films. Our results demonstrate that the shape of solitary waves, i.e., height and asymmetry of the wave, is predominantly influenced by the balance of inertia and surface tension. Furthermore, we find that the dispersion of solitary waves on the inertia-dominated falling liquid films considered in this study is governed by nonlinear effects and only driven by inertia, with surface tension and gravity having a negligible influence.

Impact of sleep inertia on visual selective attention for rare targets and the influence of chronotype.

Science.gov (United States)

Ritchie, Hannah K; Burke, Tina M; Dear, Tristan B; Mchill, Andrew W; Axelsson, John; Wright, Kenneth P

2017-10-01

Sleep inertia is affected by circadian phase, with worse performance upon awakening from sleep during the biological night than biological day. Visual search/selective visual attention performance is known to be sensitive to sleep inertia and circadian phase. Individual differences exist in the circadian timing of habitual wake time, which may contribute to individual differences in sleep inertia. Because later chronotypes awaken at an earlier circadian phase, we hypothesized that later chronotypes would have worse visual search performance during sleep inertia than earlier chronotypes if awakened at habitual wake time. We analysed performance from 18 healthy participants [five females (22.1 ± 3.7 years; mean ± SD)] at ~1, 10, 20, 30, 40 and 60 min following electroencephalogram-verified awakening from an 8 h in-laboratory sleep opportunity. Cognitive throughput and reaction times of correct responses were impaired by sleep inertia and took ~10-30 min to improve after awakening. Regardless whether chronotype was defined by dim light melatonin onset or mid-sleep clock hour on free days, derived from the Munich ChronoType Questionnaire, the duration of sleep inertia for cognitive throughput and reaction times was longer for later chronotypes (n = 7) compared with earlier chronotypes (n = 7). Specifically, performance for earlier chronotypes showed significant improvement within ~10-20 min after awakening, whereas performance for later chronotypes took ~30 min or longer to show significant improvement (P inertia contributes to longer-lasting impairments in morning performance in later chronotypes. © 2017 European Sleep Research Society.

Waking up is the hardest thing I do all day: Sleep inertia and sleep drunkenness.

Science.gov (United States)

Trotti, Lynn M

2017-10-01

The transition from sleep to wake is marked by sleep inertia, a distinct state that is measurably different from wakefulness and manifests as performance impairments and sleepiness. Although the precise substrate of sleep inertia is unknown, electroencephalographic, evoked potential, and neuroimaging studies suggest the persistence of some features of sleep beyond the point of awakening. Forced desynchrony studies have demonstrated that sleep inertia impacts cognition differently than do homeostatic and circadian drives and that sleep inertia is most intense during awakenings from the biological night. Recovery sleep after sleep deprivation also amplifies sleep inertia, although the effects of deep sleep vary based on task and timing. In patients with hypersomnolence disorders, especially but not exclusively idiopathic hypersomnia, a more pronounced period of confusion and sleepiness upon awakening, known as "sleep drunkenness", is common and problematic. Optimal treatment of sleep drunkenness is unknown, although several medications have been used with benefit in small case series. Difficulty with awakening is also commonly endorsed by individuals with mood disorders, disproportionately to the general population. This may represent an important treatment target, but evidence-based treatment guidance is not yet available. Copyright © 2016 Elsevier Ltd. All rights reserved.

Collective gyromagnetic ratio and moment of inertia from density-dependent Hartree-Fock calculations

International Nuclear Information System (INIS)

Sprung, D.W.L.; Lie, S.G.; Vallieres, M.; Quentin, P.

1979-01-01

The collective gyromagnetic ratio and moment of inertia of deformed even-even axially symmetric nuclei are calculated in the cranking approximation using wave functions obtained with the Skyrme force S-III. Good agreement is found for gsub(R), while the moment of inertia is about 20% too small. The cranking formula leads to better agreement than the projection method. (Auth.)

Material inertia and size effects in the Charpy V-notch test

DEFF Research Database (Denmark)

Desandre, D. A.; Benzerga, A. A.; Tvergaard, Viggo

2004-01-01

The effect of material inertia on the size dependence of the absorbed energy in the Charpy V-notch test is investigated. The material response is characterized by an elastic-viscoplastic constitutive relation for a porous plastic solid, with adiabatic heating due to plastic dissipation and the re......The effect of material inertia on the size dependence of the absorbed energy in the Charpy V-notch test is investigated. The material response is characterized by an elastic-viscoplastic constitutive relation for a porous plastic solid, with adiabatic heating due to plastic dissipation...

Inducverters: PLL-Less Converters with Auto-Synchronization and Emulated Inertia Capability

DEFF Research Database (Denmark)

Ashabani, Mahdi; Freijedo Fernandez, Francisco Daniel; Golestan, Saeed

2016-01-01

current information and can track grid frequency, angle and voltage amplitude variations while feeding constant amount of power which is of high interest in frequency varying grids and also in the case of grid voltage angle jump. Another advantage of the inducverter is that it introduces virtual inertia...... impedance. The controller also offers stable and high-performance synchronization and operation under unbalanced and/or distorted grid conditions. The work beside synchronous current converters give a bird’s eye view to research in the new area of PLL-less and virtual inertia-based operation of VSCs...

The Inertia Weight Updating Strategies in Particle Swarm Optimisation Based on the Beta Distribution

Directory of Open Access Journals (Sweden)

Petr Maca

2015-01-01

Full Text Available The presented paper deals with the comparison of selected random updating strategies of inertia weight in particle swarm optimisation. Six versions of particle swarm optimization were analysed on 28 benchmark functions, prepared for the Special Session on Real-Parameter Single Objective Optimisation at CEC2013. The random components of tested inertia weight were generated from Beta distribution with different values of shape parameters. The best analysed PSO version is the multiswarm PSO, which combines two strategies of updating the inertia weight. The first is driven by the temporally varying shape parameters, while the second is based on random control of shape parameters of Beta distribution.

A Change of Inertia-Supporting the Thrust Vector Control of the Space Launch System

Science.gov (United States)

Dziubanek, Adam J.

2012-01-01

The Space Launch System (SLS) is America's next launch vehicle. To utilize the vehicle more economically, heritage hardware from the Space Transportation System (STS) will be used when possible. The Solid Rocket Booster (SRB) actuators could possibly be used in the core stage of the SLS. The dynamic characteristics of the SRB actuator will need to be tested on an Inertia Load Stand (ILS) that has been converted to Space Shuttle Main Engine (SSME). The inertia on the pendulum of the ILS will need to be changed to match the SSME inertia. In this testing environment an SRB actuator can be tested with the equivalent resistence of an SSME.

The moments of inertia of a rotational band 3/2- [521] isotones odd nuclei

International Nuclear Information System (INIS)

Karahodjaev, A.K.; Kuyjonov, H.

2003-01-01

The moments of inertia are received from experimental data from the following expression for energy of a level with spin I: E I = E 0 +ℎ 2 /2j·I(I+1), K≠l/2. The characteristics of low statuses of a rotational band 3/2 - [521] and inertial parameters 1.75A 1 keV ( A-1=ℎ 2 /2j) for nuclei 155 Dy and 155 Gd are given. The values of inertial parameters 1.75A1 keV for odd nuclei with N = 89, 91, 93, 95, 97, 99, 101 and 103 are presented. At quantity of neutrons N = 89 with increase of mass number of a nucleus the moment of inertia rather quickly grows. In nuclei with quantity of neutrons equal 91 and 93, with increase of mass number the moment of inertia of nuclei slowly changes and since A=159 and A=163, accordingly, begins sharply to grow. In isotones with N = 95, 97 and 99 moments of inertia decrease with increase of quantity neutrons in a nucleus. The reason of various dependence of the moment of inertia from mass number is, the coriolis interaction of an odd particle with even-even kernel and change of parameter of pair correlation because of presence of an odd particle above a kernel

Nuclear inertia for fission in a generalized cranking model

International Nuclear Information System (INIS)

Kunz, J.; Nix, J.R.

1984-01-01

The Inglis cranking model has been widely used to calculate the nuclear inertia associated with collective degrees of freedom. After the inclusion of pairing correlations, theoretical results obtained with the cranking model for nuclear rotations and γ-vibrations were in relatively good agreement with experimental data. Calculations of β-vibrational inertias were also performed in the cranking model for fission deformations. Theoretical results were several times the irrotational values and gave reasonable agreement with experimental spontaneous-fission lifetimes, although in one study a renormalization factor of 0.8 was required. However, as pointed out by many authors, the Inglis cranking model possesses two serious deficiencies. First, problems arise when the single-particle potential contains momentum-dependence terms. Second, in the limit of large pairing strength the inertia approaches zero instead of a finite (irrotational) limit. Alternative approaches to the cranking model which did not lead to such unacceptable results were developed by Migdal, Belyaev and Thouless and Valatin. They showed that these deficiencies of the cranking model are due to a lack of self-consistency, since the reaction of the mean field to the collective motion is neglected in the Inglis model. Previously we used their arguments and developed a generalized cranking model for stationary collective motion. Here it is shown how to develop a time-dependent formalism appropriate to β-vibrations and fission. 10 references

40 CFR 86.129-94 - Road load power, test weight, inertia weight class determination, and fuel temperature profile.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, inertia... Procedures § 86.129-94 Road load power, test weight, inertia weight class determination, and fuel temperature... duty trucks 1,2,3 Test weightbasis 4,5 Test equivalent test weight(pounds) Inertia weight class(pounds...

Measurement of whole-body human centers of gravity and moments of inertia.

Science.gov (United States)

Albery, C B; Schultz, R B; Bjorn, V S

1998-06-01

With the inclusion of women in combat aircraft, the question of safe ejection seat operation has been raised. The potential expanded population of combat pilots would include both smaller and larger ejection seat occupants, which could significantly affect seat performance. The method developed to measure human whole-body CG and MOI used a scale, a knife edge balance, and an inverted torsional pendulum. Subjects' moments of inertia were measured along six different axes. The inertia tensor was calculated from these values, and principal moments of inertia were then derived. Thirty-eight antropometric measurements were also taken for each subject to provide a means for direct correlation of inertial properties to body dimensions and for modeling purposes. Data collected in this study has been used to validate whole-body mass properties predictions. In addition, data will be used to improve Air Force and Navy ejection seat trajectory models for the expanded population.

Neutron-proton pairing effect on the proton-rich nuclei moment of inertia

International Nuclear Information System (INIS)

Mokhtari, D.; Ami, I.; Fellah, M.; Allal, N.H.; Fellah, M.; Allal, N.H.

2008-01-01

The neutron-proton (n-p) pairing effect on the nuclear moment of inertia is studied within the BCS approximation in the isovector case. An analytical expression of the moment of inertia is established by means of the cranking model. This expression generalizes the usual BCS one (i.e. when only the pairing between like-particles is considered). The moment of inertia of N = Z even-even nuclei, for which experimental values are known, i.e., such as 32 ≤ A ≤ 80, has been numerically evaluated, with and without inclusion of the n-p pairing effect. The used single-particle and Eigen-states are those of a deformed Woods-Saxon mean field. It turns out that the inclusion of the n-p pairing improves the obtained values when compared to the usual BCS approximation, since the average discrepancies with the experimental data are respectively 7% and 37%. (authors)

Neutron-proton pairing effect on the proton-rich nuclei moment of inertia

Energy Technology Data Exchange (ETDEWEB)

Mokhtari, D.; Ami, I.; Fellah, M.; Allal, N.H. [Laboratoire de Physique Theorique, Faculte de Physique, USTHB, Algiers (Algeria); Fellah, M.; Allal, N.H. [Centre de Recherche Nucleaire d' Alger, COMENA, Algiers (Algeria)

2008-07-01

The neutron-proton (n-p) pairing effect on the nuclear moment of inertia is studied within the BCS approximation in the isovector case. An analytical expression of the moment of inertia is established by means of the cranking model. This expression generalizes the usual BCS one (i.e. when only the pairing between like-particles is considered). The moment of inertia of N = Z even-even nuclei, for which experimental values are known, i.e., such as 32 {<=} A {<=} 80, has been numerically evaluated, with and without inclusion of the n-p pairing effect. The used single-particle and Eigen-states are those of a deformed Woods-Saxon mean field. It turns out that the inclusion of the n-p pairing improves the obtained values when compared to the usual BCS approximation, since the average discrepancies with the experimental data are respectively 7% and 37%. (authors)

Thermal inertia in thermal infrared: porosity and chemical components of rocks; Inercia termica no infravermelho termal: porosidade e componentes quimicos de rochas

Energy Technology Data Exchange (ETDEWEB)

Pacheco, Admilson P.; Ehlers, Ricardo Sandes [Universidade Federal Fluminense, Niteroi, RJ (Brazil); Vitorello, Icaro [Instituto de Pesquisas Espaciais (INPE), Sao Jose dos Campos, SP (Brazil)

1995-12-31

The effect of porosity, and the relation between thermal inertia values and chemical components were determined. The thermal inertia values and chemical components were determined. The thermal inertia determinations were performed using radiometric observations, in the range 8 to 14 {mu}, of the surface temperature variations of the sample, induced by an incident heat flux. The results show that the increase in porosity tends to reduce the thermal inertia values, when the rock is in a dry state. In the water saturation state, the inertia also tends to show small values, only for porous rocks with thermal inertia values larger than the water values. The acid rocks show thermal inertia values smaller than those of the basic rocks. The intermediate and basic rocks show strong positive correlation between thermal inertia and Si O{sub 2}. 7 refs., 3 figs

Decision making under uncertainty and inertia constraints: sectoral implications of the when flexibility

International Nuclear Information System (INIS)

Lecocq, F.; Hourcade, J.-C.; Ha Duong, M.

1998-01-01

Current debates on climate mitigation emphasize the role of the inertia of the economic system. Our aim in this paper is to study in more depth how sectorally differentiated inertia impacts on optimal CO 2 -emission abatement policies. Using the STARTS model, we show that optimal abatement levels and costs differ sensibly among sectors. Differential inertia is the critical determinant of this trade-off, especially in the case of a 20-year delay in the action, or in an underestimation of the growth of the transportation sector. In particular, the burden of any additional abatement effort falls on the most flexible sector, i.e. the industry. Debates on mitigation emphasize the role of inertia of the economic system. This paper aims at studying more in depth how sectorally differentiated inertia should influence optimal CO 2 emission abatement policies. Using a two-sector version of STARTS, we show that under perfect expectations, optimal abatement profiles and associated costs differ sensibly between a flexible and a rigid sector (transportation). In a second step, we scrutinize the role of the uncertainty by testing the case of a 20-year delay of action and an underestimated growth of the transportation sector. We do this for three concentration ceilings and we point out the magnitude of the burden which falls on the flexible sector. We derive some policy implications for the ranking of public policies and for incentive instruments to be set up at international level. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

Microscopic mechanism of moments of inertia and odd-even differences for well-deformed actinide nuclei

International Nuclear Information System (INIS)

Yu Lei; Liu Shuxin; Zeng Jinyan

2004-01-01

The microscopic mechanism of the variation with rotational frequency of moments of inertia and their odd-even differences for well-deformed actinide nuclei are analyzed by using the particle-number conserving (PNC) method for treating nuclear pairing interaction. The moments of inertia for bands building on high j intruder orbitals in odd-A nuclei, e.g., the 235 U (ν[743]7/2) band, are found to be much larger than those of ground-state bands in neighboring even-even nuclei. Moreover, there exist large odd-even differences in the ω variation of moments of inertia. All these experimental odd-even differences are reproduced quite well in the PNC calculation, in which the effective monopole and quadrupole pairing interaction strengths are determined by the experimental odd-even differences in binding energies and bandhead moments of inertia, and no free parameter is involved in the PNC calculation

Decalogue of the Spanish Society of Arteriosclerosis to reduce therapeutic inertia.

Science.gov (United States)

Blasco, Mariano; Pérez-Martínez, Pablo; Lahoz, Carlos

Therapeutic inertia (TI) is defined as the failure of the physician to initiate or intensify a treatment when the therapeutic goal has not been achieved. TI can be of 2types: inertia due to lack of prescription of drugs and inertia in the absence of control of a risk factor. The consequences of TI are poor control of risk factors, an increase in potentially preventable events and an increase in costs. There are factors of the doctor himself, the patient and the care organization that determine the presence of TI. Ten measures are proposed to reduce TI: to promote continuing education, to define clearly therapeutic objectives, to establish audits, to implement computerized medical records with alerts, to encourage research in this field, to disseminate clinical practice guidelines, to create motivational incentives, to organize care, to improve the doctor-patient relationship and to involve other health care providers. Copyright © 2017 Sociedad Española de Arteriosclerosis. Publicado por Elsevier España, S.L.U. All rights reserved.

Angular Momentum Transfer and Fractional Moment of Inertia in Pulsar Glitches

International Nuclear Information System (INIS)

Eya, I. O.; Urama, J. O.; Chukwude, A. E.

2017-01-01

We use the Jodrell Bank Observatory glitch database containing 472 glitches from 165 pulsars to investigate the angular momentum transfer during rotational glitches in pulsars. Our emphasis is on pulsars with at least five glitches, of which there are 26 that exhibit 261 glitches in total. This paper identifies four pulsars in which the angular momentum transfer, after many glitches, is almost linear with time. The Lilliefore test on the cumulative distribution of glitch spin-up sizes in these glitching pulsars shows that glitch sizes in 12 pulsars are normally distributed, suggesting that their glitches originate from the same momentum reservoir. In addition, the distribution of the fractional moment of inertia (i.e., the ratio of the moment of inertia of neutron star components that are involved in the glitch process) have a single mode, unlike the distribution of fractional glitch size (Δ ν / ν ), which is usually bimodal. The mean fractional moment of inertia in the glitching pulsars we sampled has a very weak correlation with the pulsar spin properties, thereby supporting a neutron star interior mechanism for the glitch phenomenon.

Angular Momentum Transfer and Fractional Moment of Inertia in Pulsar Glitches

Energy Technology Data Exchange (ETDEWEB)

Eya, I. O.; Urama, J. O.; Chukwude, A. E., E-mail: innocent.eya@unn.edu.ng, E-mail: innocent.eya@gmail.com [Department of Physics and Astronomy, University of Nigeria, Nsukka, Enugu State (Nigeria)

2017-05-01

We use the Jodrell Bank Observatory glitch database containing 472 glitches from 165 pulsars to investigate the angular momentum transfer during rotational glitches in pulsars. Our emphasis is on pulsars with at least five glitches, of which there are 26 that exhibit 261 glitches in total. This paper identifies four pulsars in which the angular momentum transfer, after many glitches, is almost linear with time. The Lilliefore test on the cumulative distribution of glitch spin-up sizes in these glitching pulsars shows that glitch sizes in 12 pulsars are normally distributed, suggesting that their glitches originate from the same momentum reservoir. In addition, the distribution of the fractional moment of inertia (i.e., the ratio of the moment of inertia of neutron star components that are involved in the glitch process) have a single mode, unlike the distribution of fractional glitch size (Δ ν / ν ), which is usually bimodal. The mean fractional moment of inertia in the glitching pulsars we sampled has a very weak correlation with the pulsar spin properties, thereby supporting a neutron star interior mechanism for the glitch phenomenon.

Effects of microscale inertia on heat or mass transfer from a drop

Science.gov (United States)

Krishnamurthy, Deepak; Subramanian, Ganesh

2012-11-01

Heat or mass transport from suspensions of solid particles or drops is ubiquitous in many industrial processes. In the zero inertia limit the transport is diffusion limited owing to the presence of closed streamlines around each particle. A small but finite amount of inertia though, results in a vastly different picture, greatly enhancing transport by destroying the closed streamline configuration. We develop a theoretical formulation to study the effects of weak inertia on transport from a density-matched drop in a 2D linear flow. It is shown that, unlike a solid particle, the near-surface streamlines are closed only when the viscosity ratio (λ) exceeds a critical value λc = 2 α / (1- α) , where α is the linear flow parameter measuring relative magnitudes of extension and vorticity. The velocity field on the drop surface can be characterized using a complex-valued analogue of the (C, τ) coordinate system used to describe Jeffrey orbits of an axisymmetric particle. In the open-streamline case (λ λ c) , similar to the solid particle, inertia plays a crucial role, and the Nusselt number must scale as G(α, λ)Re1/2Pe1/2. A methodology is developed to analyze the convection along spiraling streamlines using a physically motivated choice of coordinate system on the drop surface.

Application of the voltage biased digital relay for the optimal protection of high inertia drive induction motors

International Nuclear Information System (INIS)

Choi, D. B.

1999-01-01

This paper describes typical protection schemes for large-size high inertia drive motor that are generally rotor thermal limited. Difficult and variable starting conditions of the large-size high inertia drive motor and compromises in the selection and setting of the protective devices are frequently encountered. The motors that typically encounter severe starting duty and present difficulties in achieving full motor protection are reactor coolant pumps (RCPs), blowers and compressors. For difficult starting conditions that are encountered by the large-size high inertia drive motors, state-of-the-art computer based calculations are capable of providing realistic predictions of the band of margin available for applying the protective relay. Based on the analysis of starting characteristics of large-size high inertia drive motors, this paper recommends that the optimal protection scheme for high inertia drive motors for nuclear power plants can be achieved by using the voltage biased digital relay instead of a speed switch and conventional overcurrent relays. (author)

An Algorithm for Online Inertia Identification and Load Torque Observation via Adaptive Kalman Observer-Recursive Least Squares

Directory of Open Access Journals (Sweden)

Ming Yang

2018-03-01

Full Text Available In this paper, an on-line parameter identification algorithm to iteratively compute the numerical values of inertia and load torque is proposed. Since inertia and load torque are strongly coupled variables due to the degenerate-rank problem, it is hard to estimate relatively accurate values for them in the cases such as when load torque variation presents or one cannot obtain a relatively accurate priori knowledge of inertia. This paper eliminates this problem and realizes ideal online inertia identification regardless of load condition and initial error. The algorithm in this paper integrates a full-order Kalman Observer and Recursive Least Squares, and introduces adaptive controllers to enhance the robustness. It has a better performance when iteratively computing load torque and moment of inertia. Theoretical sensitivity analysis of the proposed algorithm is conducted. Compared to traditional methods, the validity of the proposed algorithm is proved by simulation and experiment results.

Effect of Process Variables on the Inertia Friction Welding of Superalloys LSHR and Mar-M247

Science.gov (United States)

Mahaffey, D. W.; Senkov, O. N.; Shivpuri, R.; Semiatin, S. L.

2016-08-01

The effect of inertia friction welding process parameters on microstructure evolution, weld plane quality, and the tensile behavior of welds between dissimilar nickel-base superalloys was established. For this purpose, the fine-grain, powder metallurgy alloy LSHR was joined to coarse-grain cast Mar-M247 using a fixed level of initial kinetic energy, but different combinations of the flywheel moment of inertia and initial rotation speed. It was found that welds made with the largest moment of inertia resulted in a sound bond with the best microstructure and room-temperature tensile strength equal to or greater than that of the parent materials. A relationship between the moment of inertia and weld process efficiency was established. The post-weld tensile behavior was interpreted in the context of observed microstructure gradients and weld-line defects.

Effect of rotary inertia of concentrated masses on the natural vibration of fluid conveying pipes

International Nuclear Information System (INIS)

Kang, Myeong Gie

1999-01-01

Effects of the rotary inertia of concentrated masses on the natural vibrations of fluid conveying pipes have been studied by theoretical modeling and computer simulation. For analysis, two boundary conditions for pipe ends, simply supported and clamped-clamped, are assumed and Galerkin's method is used for transformation of the governing equation to the eigenvalues problem and the natural frequencies and mode shapes for the system have been calculated by using the newly developed computer code. Moreover, the critical velocities related to a system instability have been investigated. The main conclusions for the present study are (1) rotary inertia gives much change on the higher natural frequencies and mode shapes and its effect is visible when it has small value, (2) The number and location of nodes can be changed by rotary inertia, (3) By introducing rotary inertia, the second natural frequency approaches to the first as the location of the concentrated mass approaches to the midspan of the pipe, and (4) The critical fluid velocities to initiate the system unstable are unchanged by introduction of rotary inertia and the first three velocities are π, 2π, and 3π for the simply supported pipe and 2π, 8.99 and 12.57 for the clamped-clamped pipe. (author). 16 refs., 7 figs., 3 tabs

Determinacy, stock market dynamics and monetary policy inertia

DEFF Research Database (Denmark)

Pfajfar, Damjan; Santoro, Emiliano

2011-01-01

We study equilibrium determinacy in a New-Keynesian model where the Central Bank responds to asset prices growth. Unlike Taylor-type rules that react to asset prices, the proposed alternative does not harm dynamic stability and in certain cases promotes determinacy by inducing interest-rate inertia....

CONSTRAINING SATURN'S CORE PROPERTIES BY A MEASUREMENT OF ITS MOMENT OF INERTIA-IMPLICATIONS TO THE CASSINI SOLSTICE MISSION

International Nuclear Information System (INIS)

Helled, R.

2011-01-01

Knowledge of Saturn's axial moment of inertia can provide valuable information on its internal structure. We suggest that Saturn's angular momentum may be determined by the Solstice Mission (Cassini XXM) by measuring Saturn's pole precession rate and the Lense-Thirring acceleration on the spacecraft, and therefore put constraints on Saturn's moment of inertia. It is shown that Saturn's moment of inertia can change up to ∼2% due to different core properties. However, a determination of Saturn's rotation rate is required to constrain its axial moment of inertia. A change of about seven minutes in rotation period leads to a similar uncertainty in the moment of inertia value as different core properties (mass, radius). A determination of Saturn's angular momentum and rotation period by the Solstice Mission could reveal important information on Saturn's internal structure, in particular, its core properties.

THE EFFECTS OF RACKET INERTIA TENSOR ON ELBOW LOADINGS AND RACKET BEHAVIOR FOR CENTRAL AND ECCENTRIC IMPACTS

Directory of Open Access Journals (Sweden)

Steven M. Nesbit

2006-06-01

Full Text Available This paper discusses the inertia tensors of tennis rackets and their influence on the elbow swing torques in a forehand motion, the loadings transmitted to the elbow from central and eccentric impacts, and the racket acceleration responses from central and eccentric impacts. Inertia tensors of various rackets with similar mass and mass center location were determined by an inertia pendulum and were found to vary considerably in all three orthogonal directions. Tennis swing mechanics and impact analyses were performed using a computer model comprised of a full-body model of a human, a parametric model of the racket, and an impact function. The swing mechanics analysis of a forehand motion determined that inertia values had a moderate linear effect on the pronation-supination elbow torques required to twist the racket, and a minor effect on the flexion-extension and valgus-varus torques. The impact analysis found that mass center inertia values had a considerable effect on the transmitted torques for both longitudinal and latitudinal eccentric impacts and significantly affected all elbow torque components. Racket acceleration responses to central and eccentric impacts were measured experimentally and found to be notably sensitive to impact location and mass center inertia values

The effect of inertia, viscous damping, temperature and normal ...

Indian Academy of Sciences (India)

Nitish Sinha

2018-04-16

Apr 16, 2018 ... physical parameters such as inertia, viscous damping, temperature and normal stress on the chaotic ... However, the present study has shown the appearance of chaos for the specific .... Although chaos is a general man-.

Heat transfer of pulsating laminar flow in pipes with wall thermal inertia

International Nuclear Information System (INIS)

Yuan, Hongsheng; Tan, Sichao; Wen, Jing; Zhuang, Nailiang

2016-01-01

The effects of wall thermal inertia on heat transfer of pulsating laminar flow with constant power density within the pipe wall are investigated theoretically. The energy equation of the fully developed flow and heat transfer is solved by separation of variables and Green's function. The effects of the pulsation amplitude and frequency, the Prandtl number and the wall heat capacity on heat transfer features characterized by temperature, heat flux and Nusselt number are analyzed. The results show that the oscillation of wall heat flux increases along with the wall thermal inertia, while the oscillation of temperature and Nusselt number is suppressed by the wall thermal inertia. The influence of pulsation on the average Nusselt number is also obtained. The pulsating laminar flow can reduce the average Nusselt number. The Nusselt number reduction of pipe flow are a little more remarkable than that of flow between parallel plates, which is mainly caused by differences in hydraulic and thermal performances of the channels. (authors)

Don't just do something, stand there! The value and art of deliberate clinical inertia.

Science.gov (United States)

Keijzers, Gerben; Cullen, Louise; Egerton-Warburton, Diana; Fatovich, Daniel M

2018-04-01

It can be difficult to avoid unnecessary investigations and treatments, which are a form of low-value care. Yet every intervention in medicine has potential harms, which may outweigh the potential benefits. Deliberate clinical inertia is the art of doing nothing as a positive response. This paper provides suggestions on how to incorporate deliberate clinical inertia into our daily clinical practice, and gives an overview of current initiatives such as 'Choosing Wisely' and the 'Right Care Alliance'. The decision to 'do nothing' can be complex due to competing factors, and barriers to implementation are highlighted. Several strategies to promote deliberate clinical inertia are outlined, with an emphasis on shared decision-making. Preventing medical harm must become one of the pillars of modern health care and the art of not intervening, that is, deliberate clinical inertia, can be a novel patient-centred quality indicator to promote harm reduction. © 2018 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Modelling diffusion feedbacks between technology performance, cost and consumer behaviour for future energy-transport systems

Science.gov (United States)

Tran, Martino; Brand, Christian; Banister, David

2014-04-01

Emerging technologies will have important impacts on sustainability objectives. Yet little is known about the explicit feedbacks between consumer behaviour and technological change, and the potential impact on mass market penetration. We use the UK as a case-study to explore the dynamic interactions between technology supply, performance, cost, and heterogeneous consumer behaviour and the resulting influence on long term market diffusion. Simulations of competing vehicle technologies indicate that petrol hybrids (HEVs) dominate the market over the long-term because they benefit from improved performance and are able to reach the steep part of the diffusion curve by 2025 while competing technologies remain in the early stages of growth and are easier to displace in the market. This is due to the cumulative build-up of stock and slow fleet turnover creating inertia in the technological system. Consequently, it will be difficult to displace incumbent technologies because of system inertia, cumulative growth in stock, long operational life, and consumer risk aversion to new unproven technologies. However, when accounting for both technological and behavioural change, simulations indicate that if investment can reach 30-40% per annum growth in supply, combined with steady technology improvements, and more sophisticated agent decision making such as accounting for full technology lifecycle cost and performance, full battery electric vehicles could displace the incumbent system by 2050.

The concept and definition of therapeutic inertia in hypertension in primary care: a qualitative systematic review.

Science.gov (United States)

Lebeau, Jean-Pierre; Cadwallader, Jean-Sébastien; Aubin-Auger, Isabelle; Mercier, Alain; Pasquet, Thomas; Rusch, Emmanuel; Hendrickx, Kristin; Vermeire, Etienne

2014-07-02

Therapeutic inertia has been defined as the failure of health-care provider to initiate or intensify therapy when therapeutic goals are not reached. It is regarded as a major cause of uncontrolled hypertension. The exploration of its causes and the interventions to reduce it are plagued by unclear conceptualizations and hypothesized mechanisms. We therefore systematically searched the literature for definitions and discussions on the concept of therapeutic inertia in hypertension in primary care, to try and form an operational definition. A systematic review of all types of publications related to clinical inertia in hypertension was performed. Medline, EMbase, PsycInfo, the Cochrane library and databases, BDSP, CRD and NGC were searched from the start of their databases to June 2013. Articles were selected independently by two authors on the basis of their conceptual content, without other eligibility criteria or formal quality appraisal. Qualitative data were extracted independently by two teams of authors. Data were analyzed using a constant comparative qualitative method. The final selection included 89 articles. 112 codes were grouped in 4 categories: terms and definitions (semantics), "who" (physician, patient or system), "how and why" (mechanisms and reasons), and "appropriateness". Regarding each of these categories, a number of contradictory assertions were found, most of them relying on little or no empirical data. Overall, the limits of what should be considered as inertia were not clear. A number of authors insisted that what was considered deleterious inertia might in fact be appropriate care, depending on the situation. Our data analysis revealed a major lack of conceptualization of therapeutic inertia in hypertension and important discrepancies regarding its possible causes, mechanisms and outcomes. The concept should be split in two parts: appropriate inaction and inappropriate inertia. The development of consensual and operational definitions

Obstacles to Reasoning about Inertia in Different Contexts

Science.gov (United States)

Yerdelen-Damar, Sevda

2015-01-01

The present study investigated the underlying reasons for difficulties faced by students when they applied the concept of inertia across varying contexts. The participants of the study included five high school students. Data obtained from interviews were interpreted from the perspectives of the coordination class and epistemological framing…

A Virtual Inertia Control Strategy for DC Microgrids Analogized with Virtual Synchronous Machines

DEFF Research Database (Denmark)

Wu, Wenhua; Chen, Yandong; Luo, An

2017-01-01

In a DC microgrid (DC-MG), the dc bus voltage is vulnerable to power fluctuation derived from the intermittent distributed energy or local loads variation. In this paper, a virtual inertia control strategy for DC-MG through bidirectional grid-connected converters (BGCs) analogized with virtual...... synchronous machine (VSM) is proposed to enhance the inertia of the DC-MG, and to restrain the dc bus voltage fluctuation. The small-signal model of the BGC system is established, and the small-signal transfer function between the dc bus voltage and the dc output current of the BGC is deduced. The dynamic...... for the BGC is introduced to smooth the dynamic response of the dc bus voltage. By analyzing the control system stability, the appropriate virtual inertia control parameters are selected. Finally, simulations and experiments verified the validity of the proposed control strategy....

Clinical inertia and its impact on treatment intensification in people with type 2 diabetes mellitus.

Science.gov (United States)

Reach, G; Pechtner, V; Gentilella, R; Corcos, A; Ceriello, A

2017-12-01

Many people with type 2 diabetes mellitus (T2DM) fail to achieve glycaemic control promptly after diagnosis and do not receive timely treatment intensification. This may be in part due to 'clinical inertia', defined as the failure of healthcare providers to initiate or intensify therapy when indicated. Physician-, patient- and healthcare-system-related factors all contribute to clinical inertia. However, decisions that appear to be clinical inertia may, in fact, be only 'apparent' clinical inertia and may reflect good clinical practice on behalf of the physician for a specific patient. Delay in treatment intensification can happen at all stages of treatment for people with T2DM, including prescription of lifestyle changes after diagnosis, introduction of pharmacological therapy, use of combination therapy where needed and initiation of insulin. Clinical inertia may contribute to people with T2DM living with suboptimal glycaemic control for many years, with dramatic consequences for the patient in terms of quality of life, morbidity and mortality, and for public health because of the huge costs associated with uncontrolled T2DM. Because multiple factors can lead to clinical inertia, potential solutions most likely require a combination of approaches involving fundamental changes in medical care. These could include the adoption of a person-centred model of care to account for the complex considerations influencing treatment decisions by patients and physicians. Better patient education about the progressive nature of T2DM and the risks inherent in long-term poor glycaemic control may also reinforce the need for regular treatment reviews, with intensification when required. Copyright © 2017 The Authors. Published by Elsevier Masson SAS.. All rights reserved.

Effect of liquid inertia on bubble growth in the presence of a magnetic field

International Nuclear Information System (INIS)

Wagner, L.Y.; Lykoudis, P.S.

1977-01-01

Liquid metal bubble growth in the presence of a magnetic field has previously been examined by Lykoudis under the assumption that the process is heat transfer controlled. In the present work, the growth of a bubble under the influence of a magnetic field is considered when the effect of the liquid inertia is included. This yields a better description of the phenomena for liquid metals, due to the greater portion of the growth cycle that is dominated by the liquid inertia forces. The results indicate that liquid inertia can significantly affect the growth of a liquid metal bubble when compared with the heat transfer-controlled case. The overall effect of the magnetic field forces the heat transfer-controlled growth to occur earlier in the life of the bubble. Hence, heat transfer effects dominate the growth stage more as the magnetic field is increased. The inertia effects are damped and, in the limit of high magnetic fields, growth is only heat transfer controlled. The heat transfer estimates made in the fashion of Forster and Zuber indicate that the magnetic field reduces the energy transport in nucleate boiling. 5 figures

Orion Pad Abort 1 Crew Module Inertia Test Approach and Results

Science.gov (United States)

Herrera, Claudia; Harding, Adam

2010-01-01

The Flight Loads Laboratory at the Dryden Flight Research Center conducted tests to measure the inertia properties of the Orion Pad Abort 1 (PA-1) Crew Module. These measurements were taken to validate analytical predictions of the inertia properties of the vehicle and assist in reducing uncertainty for derived aero performance results calculated post launch. The first test conducted was to determine the Ixx of the Crew Module. This test approach used a modified torsion pendulum test step up that allowed the suspended Crew Module to rotate about the x axis. The second test used a different approach to measure both the Iyy and Izz properties. This test used a Knife Edge fixture that allowed small rotation of the Crew Module about the y and z axes. Discussions of the techniques and equations used to accomplish each test are presented. Comparisons with the predicted values used for the final flight calculations are made. Problem areas, with explanations and recommendations where available, are addressed. Finally, an evaluation of the value and success of these techniques to measure the moments of inertia of the Crew Module is provided.

Frequency participation by using virtual inertia in wind turbines including energy storage

DEFF Research Database (Denmark)

Xiao, Zhao xia; Huang, Yu; Guerrero, Josep M.

2017-01-01

With the increase of wind generation penetration, power fluctuations and weak inertia may attempt to the power system frequency stability. In this paper, in order to solve this problem, a hierarchical control strategy is proposed for permanent magnet synchronous generator (PMSG) based wind turbine...... (WT) and battery unit (BU). A central controller forecasts wind speed and determines system operation states to be sent to the local controllers. These local controllers include MPPT, virtual inertia, and pitch control for the WT; and power control loops for the BU. The proposed approach achieve...

40 CFR 86.1772-99 - Road load power, test weight, and inertia weight class determination.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Road load power, test weight, and inertia weight class determination. 86.1772-99 Section 86.1772-99 Protection of Environment ENVIRONMENTAL... for Light-Duty Vehicles and Light-Duty Trucks § 86.1772-99 Road load power, test weight, and inertia...

Clinical Inertia in a Randomized Trial of Telemedicine-Based Chronic Disease Management: Lessons Learned.

Science.gov (United States)

Barton, Anna Beth; Okorodudu, Daniel E; Bosworth, Hayden B; Crowley, Matthew J

2018-01-17

Treatment nonadherence and clinical inertia perpetuate poor cardiovascular disease (CVD) risk factor control. Telemedicine interventions may counter both treatment nonadherence and clinical inertia. We explored why a telemedicine intervention designed to reduce treatment nonadherence and clinical inertia did not improve CVD risk factor control, despite enhancing treatment adherence versus usual care. In this analysis of a randomized trial, we studied recipients of the 12-month telemedicine intervention. This intervention comprised two nurse-administered components: (1) monthly self-management education targeting improved treatment adherence; and (2) quarterly medication management facilitation designed to support treatment intensification by primary care (thereby reducing clinical inertia). For each medication management facilitation encounter, we ascertained whether patients met treatment goals, and if not, whether primary care recommended treatment intensification following the encounter. We assessed disease control associated with encounters, where intensification was/was not recommended. We examined 455 encounters across 182 intervention recipients (100% African Americans with type 2 diabetes). Even after accounting for valid reasons for deferring intensification (e.g., treatment nonadherence), intensification was not recommended in 67.5% of encounters in which hemoglobin A1c was above goal, 72.5% in which systolic blood pressure was above goal, and 73.9% in which low-density lipoprotein cholesterol was above goal. In each disease state, treatment intensification was more likely with poorer control. Despite enhancing treatment adherence, this intervention was unsuccessful in countering clinical inertia, likely explaining its lack of effect on CVD risk factors. We identify several lessons learned that may benefit investigators and healthcare systems.

Role of inertia in the fracture of rock

International Nuclear Information System (INIS)

Passman, S.L.; Grady, D.E.; Rundle, J.B.

1980-01-01

A theory for the accumulation of damage in one dimension in fast deformation of a brittle material is developed. The theory is consistent with thermodynamics and takes crack inertia into account. The problem of damage accumulation due to a step pulse in strain is solved, and shows good agreement with experimental results

Inaction inertia, regret, and valuation : A closer look

NARCIS (Netherlands)

Zeelenberg, Marcel; Nijstad, Bernard A.; van Putten, Marijke; van Dijk, Eric

Inaction inertia is the phenomenon that one is not likely to act on an attractive opportunity after having bypassed an even more attractive opportunity. So far, all published work has assumed a causal role for the emotion regret in this effect. In a series of 5 experiments we found no support for

Nuclear moments of inertia inferred from wobbling motion in the triaxial superdeformed nuclei

International Nuclear Information System (INIS)

Matsuzaki, Masayuki; Shimizu, Yoshifumi R.; Matsuyanagi, Kenichi

2003-01-01

The three moments of inertia associated with the wobbling mode built on the triaxial superdeformed states in Lu-Hf region are investigated by means of the cranked shell model plus random-phase approximation to the configurations with aligned quasiparticle(s). The result indicates that it is crucial to take into account the direct contribution to the moments of inertia from the aligned quasiparticle(s)so as to realize T x > T y in positive-γ shapes. (author)

Piezoelectric Inertia Motors—A Critical Review of History, Concepts, Design, Applications, and Perspectives

Directory of Open Access Journals (Sweden)

Matthias Hunstig

2017-02-01

Full Text Available Piezoelectric inertia motors—also known as stick-slip motors or (smooth impact drives—use the inertia of a body to drive it in small steps by means of an uninterrupted friction contact. In addition to the typical advantages of piezoelectric motors, they are especially suited for miniaturisation due to their simple structure and inherent fine-positioning capability. Originally developed for positioning in microscopy in the 1980s, they have nowadays also found application in mass-produced consumer goods. Recent research results are likely to enable more applications of piezoelectric inertia motors in the future. This contribution gives a critical overview of their historical development, functional principles, and related terminology. The most relevant aspects regarding their design—i.e., friction contact, solid state actuator, and electrical excitation—are discussed, including aspects of control and simulation. The article closes with an outlook on possible future developments and research perspectives.

Sustainable consumer behaviour

NARCIS (Netherlands)

Antonides, Gerrit

2017-01-01

We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments,

Moment inertia pump analysis used in the Rsg-Gas primary coolant loop under lofa condition

International Nuclear Information System (INIS)

Sudarmono; Setiyanto; Dhandhang, P.; Dibyo, S.; Royadi

1998-01-01

The moment inertia of primary cooling system analysis under LOFA condition has been done. It is potentially one of limiting design constraints of the RSG-GAS safety because the coolant flow rate reduces very rapidly under LOFA condition due to the low inertia circulation pumps. If a loss of flow accident occurs, the mass flow will decrease rapidly and the heat transfer coefficient between cladding and coolant will also decreases. As a consequence the fuel and cladding temperature will increase. The whole core was represented by the 1/4 sector and divided into 19 subchannels and 40 axial nodes. In the present study, moment inertia of pump analysis for RSG-GAS reactor was performed with COBRA-IV-I subchannel code. As the DNB correlation, W-3 Correlation was selected for base case. The flow and power transients under pump trip accident were determined from experiments. The result above compared with the design data are 75 kg m 2 and 81 Kg m 2 respectively. The result shows that the RSG-GAS requires the inertia more than 75 kg m 2

Newton's second law versus modified-inertia MOND: A test using the high-latitude effect

International Nuclear Information System (INIS)

Ignatiev, A. Yu.

2008-01-01

The modified-inertia MOND is an approach that proposes a change in Newton's second law at small accelerations as an alternative to dark matter. Recently it was suggested that this approach can be tested in terrestrial laboratory experiments. One way of doing the test is based on the static high-latitude equinox modified-inertia effect: around each equinox date, 2 spots emerge on the Earth where static bodies experience spontaneous displacement due to the violation of Newton's second law required by the modified-inertia MOND. Here, a detailed theory of this effect is developed and estimates of the magnitude of the signal due to the effect are obtained. The expected displacement of a mirror in a gravitational-wave interferometer is found to be about 10 -14 m. Some experimental aspects of the proposal are discussed

Kπ=1+ pairing interaction and moments of inertia of superdeformed rotational bands in atomic nuclei

International Nuclear Information System (INIS)

Hamamoto, I.; Nazarewicz, W.

1994-01-01

The effect of the pairing interaction coming from the rotationally induced K π =1 + pair-density on the nuclear moments of inertia is studied. It is pointed out that, contrary to the situation at normal deformations, the inclusion of the K π =1 + pairing may appreciably modify the frequency dependence of the moments of inertia at superdeformed shapes

Clinical inertia in the treatment of hyperglycemia in type 2 diabetes patients in primary care.

Science.gov (United States)

Mata-Cases, Manel; Benito-Badorrey, Belén; Roura-Olmeda, Pilar; Franch-Nadal, Josep; Pepió-Vilaubí, Josep Maria; Saez, Marc; Coll-de-Tuero, Gabriel

2013-11-01

To assess clinical inertia, defined as failure to intensify antidiabetic treatment of patients who have not achieved the HbA1c therapeutic goal (≤7%). Multicenter cross-sectional study. Clinical inertia was assessed in a random sample of type 2 diabetes mellitus (T2DM) patients seen in primary care centers. A total of 2783 patients (51.3% males; mean age: 68 [±11.5] years; diabetes duration: 7.1 [±5.6] years; mean HbA1c: 6.8 [±1.5]) were analyzed. Of those, 997 (35.8%) had HbA1c >7%. Treatment was intensified in 66.8% and consisted of: dose increase (40.5%); addition of oral antidiabetic (45.8%); or insulin treatment initiation (3.7%). Mean HbA1c values in patients for whom treatment was intensified vs. non-intensified were 8.4% (±1.2) vs. 8.2% (±1.2), p inertia was detected in 33.2% of patients and diminished along with treatment complexity: lifestyle changes only (38.8%), oral monotherapy (40.3%), combined oral antidiabetics (34.5%), insulin monotherapy (26.1%) and combination of insulin and oral antidiabetics (21.4%). Clinical inertia decreased as HbA1c increased: 37.3% for HbA1c values ranging between 7.1%-8%; 29.4% for the 8.1%-9% HbA1c range and 27.1% for HbA1c ≥9%. Multivariate analysis confirmed that diabetes duration, step of treatment and HbA1c were related to inertia. For each unit of HbA1c increase clinical inertia decreased 47% (OR: 0.53). The retrospective design of the study precluded an accurate investigation about reasons for lack of intensification that could actually be justified by some patient conditions, especially patients' lack of adherence. Clinical inertia affected one third of T2DM patients with poor glycemic control and was greater in patients treated with only lifestyle changes or oral monotherapy. Treatment changes were performed when mean HbA1c values were 1.4 points above therapeutic goals.

Test of neural inertia in humans during general anaesthesia.

Science.gov (United States)

Kuizenga, M H; Colin, P J; Reyntjens, K M E M; Touw, D J; Nalbat, H; Knotnerus, F H; Vereecke, H E M; Struys, M M R F

2018-03-01

Neural inertia is defined as the tendency of the central nervous system to resist transitions between arousal states. This phenomenon has been observed in mice and Drosophila anaesthetized with volatile anaesthetics: the effect-site concentration required to induce anaesthesia in 50% of the population (C 50 ) was significantly higher than the effect-site concentration for 50% of the population to recover from anaesthesia. We evaluated this phenomenon in humans using propofol or sevoflurane (both with or without remifentanil) as anaesthetic agents. Thirty-six healthy volunteers received four sessions of anaesthesia with different drug combinations in a step-up/step-down design. Propofol or sevoflurane was administered with or without remifentanil. Serum concentrations of propofol and remifentanil were measured from arterial blood samples. Loss and return of responsiveness (LOR-ROR), response to pain (PAIN), Patient State Index (PSI) and spectral edge frequency (SEF) were modeled with NONMEM®. For propofol, the C 50 for induction and recovery of anaesthesia was not significantly different across the different endpoints. For sevoflurane, for all endpoints except SEF, significant differences were found. For some endpoints (LOR and PAIN) the difference was significant only when sevoflurane was combined with remifentanil. Our results nuance earlier findings with volatile anaesthetics in mice and Drosophila. Methodological aspects of the study, such as the measured endpoint, influence the detection of neural inertia. A more thorough definition of neural inertia, with a robust methodological framework for clinical studies is required to advance our knowledge of this phenomenon. NCT 02043938. Copyright © 2017 British Journal of Anaesthesia. Published by Elsevier Ltd. All rights reserved.

Place branding and the Liverpool ’08 brand campaign in 'City of Liverpool'

OpenAIRE

Maheshwari, V

2010-01-01

Place branding brings together a range of existing specialisms, in particular those of brand management and development policy, to create a new discipline with equal emphasis on visionary strategy and hands-on implementation.1 Furthermore, Place branding ensures that the place gets due credit for its real strengths and positive behaviour, and that the place brand gains appropriate equity from the recognition,\\ud which that behaviour deserves.

The Zone of Inertia: Absorptive Capacity and Organizational Change

Science.gov (United States)

Godkin, Lynn

2010-01-01

Purpose: The purpose of this paper is to describe how interruptions in organizational learning effect institutional absorptive capacity and contribute to organizational inertia. Design/methodology/approach: An exploratory model is presented as a heuristic to describe how interruptions in organizational learning affect absorptive capacity.…

Therapeutic inertia in the management of hyperlipidaemia in type 2 diabetic patients: a cross-sectional study in the primary care setting.

Science.gov (United States)

Man, F Y; Chen, C Xr; Lau, Y Y; Chan, K

2016-08-01

To study the prevalence of therapeutic inertia in lipid management among type 2 diabetic patients in the primary care setting and to explore associated factors. This was a cross-sectional study involving type 2 diabetic patients with suboptimal lipid control followed up in all general out-patient clinics of Kowloon Central Cluster in Hong Kong from 1 October 2011 to 30 September 2013. Main outcome measures included prevalence of therapeutic inertia in low-density lipoprotein management among type 2 diabetic patients and its association with patient and physician characteristics. Based on an agreed standard, lipid control was suboptimal in 49.1% (n=9647) of type 2 diabetic patients who attended for a regular annual check-up (n=19 662). Among the sampled 369 type 2 diabetic patients with suboptimal lipid control, therapeutic inertia was found to be present in 244 cases, with a prevalence rate of 66.1%. When the attending doctors' profiles were compared, the mean duration of clinical practice was significantly longer in the therapeutic inertia group than the non-therapeutic inertia group. Doctors without prior training in family medicine were also found to have a higher rate of therapeutic inertia. Patients in the therapeutic inertia group had longer disease duration, a higher co-morbidity rate of cardiovascular disease, and a closer-to-normal low-density lipoprotein level. Logistic regression analysis revealed that lack of family medicine training among doctors was positively associated with the presence of therapeutic inertia whereas patient's low-density lipoprotein level was inversely associated. Therapeutic inertia was common in the lipid management of patients with type 2 diabetes in a primary care setting. Lack of family medicine training among doctors and patient's low-density lipoprotein level were associated with the presence of therapeutic inertia. Further study of the barriers and strategies to overcome therapeutic inertia is needed to improve patient

Modeling the Effect of Grain Size Mixing on Thermal Inertia Values Derived from Diurnal and Seasonal THEMIS Measurements

Science.gov (United States)

McCarty, C.; Moersch, J.

2017-12-01

Sedimentary processes have slowed over Mars' geologic history. Analysis of the surface today can provide insight into the processes that may have affected it over its history. Sub-resolved checkerboard mixtures of materials with different thermal inertias (and therefore different grain sizes) can lead to differences in thermal inertia values inferred from night and day radiance observations. Information about the grain size distribution of a surface can help determine the degree of sorting it has experienced or it's geologic maturity. Standard methods for deriving thermal inertia from measurements made with THEMIS can give values for the same location that vary by as much as 20% between scenes. Such methods make the assumption that each THEMIS pixel contains material that has uniform thermophysical properties. Here we propose that if a mixture of small and large particles is present within a pixel, the inferred thermal inertia will be strongly dominated by whichever particle is warmer at the time of the measurement because the power radiated by a surface is proportional (by the Stefan-Boltzmann law) to the fourth power of its temperature. This effect will result in a change in thermal inertia values inferred from measurements taken at different times of day and night. Therefore, we expect to see correlation between the magnitude of diurnal variations in inferred thermal inertia values and the degree of grain size mixing for a given pixel location. Preliminary work has shown that the magnitude of such diurnal variation in inferred thermal inertias is sufficient to detect geologically useful differences in grain size distributions. We hypothesize that at least some of the 20% variability in thermal inertias inferred from multiple scenes for a given location could be attributed to sub-pixel grain size mixing rather than uncertainty inherent to the experiment, as previously thought. Mapping the difference in inferred thermal inertias from day and night THEMIS

System Inertia in the Changing Paradigm for Biodiversity ...

African Journals Online (AJOL)

The aim of this paper is to show that while there has been a change, at a policy level, from the old “conservation without a human face” to the new development for sustainable development, inertia in the policy implementation agencies has meant that the provisions of these new policy frameworks have not been translated ...

Influence of a diffuse distribution of nucleon density on the effective moments of inertia of fissioning nuclei

International Nuclear Information System (INIS)

Adeev, G.; Trunova, T.

1982-01-01

The effective moments of inertia of pre-actinide nuclei with 73< or =Z< or =85 are calculated in the droplet model. In contrast to studies carried out previously, the influence of the diffuseness of the nuclear surface and the nonuniformity of the distribution of nucleon density was taken into account both in calculation of the saddle-point configurations and directly in calculation of the effective moments of inertia of the fissioning nuclei. The results are compared with the moments of inertia calculated in the liquid-drop model and with experimental data

Vibration analysis of carbon nanotubes-based zeptogram masses sensors and taking into account their rotatory inertia

Directory of Open Access Journals (Sweden)

Azrar A.

2018-01-01

Full Text Available In this research work, the transverse vibration behaviour of single-walled carbon nanotubes (SCNT based mass sensors is studied using the Timoshenko beam and nonlocal elasticity theories. The nonlocal constitutive equations are used in the formulations and the CNT with different lengths, attached mass (viruses and bacteria and the general boundary conditions are considered. The dimensionless frequencies and associated modes are obtained for one and two attached masses and different boundary conditions. The effects of transverse shear deformation and rotatory inertia, nonlocal parameter, length of the carbon nanotubes, and attached mass and its location are investigated in detail for each considered problem. The relationship between the frequencies and mode shapes of the sensor and the attached zeptogramme masses are obtained. The sensing devices for biological objects including viruses and bacteria can be elaborated based on the developed sensitivity and frequency shift methodological approach.

Therapeutic inertia in the treatment of hyperglycaemia in patients with type 2 diabetes: A systematic review.

Science.gov (United States)

Khunti, Kamlesh; Gomes, Marilia B; Pocock, Stuart; Shestakova, Marina V; Pintat, Stéphane; Fenici, Peter; Hammar, Niklas; Medina, Jesús

2018-02-01

Therapeutic inertia, defined as the failure to initiate or intensify therapy in a timely manner according to evidence-based clinical guidelines, is a key reason for uncontrolled hyperglycaemia in patients with type 2 diabetes. The aims of this systematic review were to identify how therapeutic inertia in the management of hyperglycaemia was measured and to assess its extent over the past decade. Systematic searches for articles published from January 1, 2004 to August 1, 2016 were conducted in MEDLINE and Embase. Two researchers independently screened all of the titles and abstracts, and the full texts of publications deemed relevant. Data were extracted by a single researcher using a standardized data extraction form. The final selection for the review included 53 articles. Measurements used to assess therapeutic inertia varied across studies, making comparisons difficult. Data from low- to middle-income countries were scarce. In most studies, the median time to treatment intensification after a glycated haemoglobin (HbA1c) measurement above target was more than 1 year (range 0.3 to >7.2 years). Therapeutic inertia increased as the number of antidiabetic drugs rose and decreased with increasing HbA1c levels. Data were mainly available from Western countries. Diversity of inertia measures precluded meta-analysis. Therapeutic inertia in the management of hyperglycaemia in patients with type 2 diabetes is a major concern. This is well documented in Western countries, but corresponding data are urgently needed in low- and middle-income countries, in view of their high prevalence of type 2 diabetes. © 2017 The Authors. Diabetes, Obesity and Metabolism published by John Wiley & Sons Ltd.

Nuclear moments of inertia and wobbling motions in triaxial superdeformed nuclei

International Nuclear Information System (INIS)

Matsuzaki, Masayuki; Shimizu, Yoshifumi R.; Matsuyanagi, Kenichi

2004-01-01

The wobbling motion excited on triaxial superdeformed nuclei is studied in terms of the cranked shell model plus random phase approximation. First, by calculating at a low rotational frequency the γ dependence of the three moments of inertia associated with the wobbling motion, the mechanism of the appearance of the wobbling motion in positive-γ nuclei is clarified theoretically--the rotational alignment of the πi 13/2 quasiparticle(s) is the essential condition. This indicates that the wobbling motion is a collective motion that is sensitive to the single-particle alignment. Second, we prove that the observed unexpected rotational-frequency dependence of the wobbling frequency is an outcome of the rotational-frequency dependent dynamical moments of inertia

Adherence to blood pressure and glucose recommendations in chronic kidney disease hospital inpatients: Clinical inertia and patient adherence.

Science.gov (United States)

Gardiner, Fergus William; Nwose, Ezekiel Uba; Bwititi, Phillip Taderera; Crockett, Judith; Wang, Lexin

2018-05-01

To determine the extent to which targets for blood pressure (BP) (inertia affects BP and glucose control in CKD and diabetes mellitus (DM). Data was collected from the 1st January 2015 until 31st December 2015 on key patient pathology, admission reason, final discharge diagnosis, and information concerning clinical guideline adherence. Eighty-seven (n = 87) CKD patients were included. The average hospital BP for all CKD patients was 134.3/73.4 mmHg, adhering to recommendations of 7.0% >53 mmol/mol). There were 21 cases of clinical inertia, affecting 18 out of 87 patients (20.7%), with significant adverse hospital discharge differences (p = inertia and non- clinical inertia patient systolic BP (144.2 vs. 132.8 mmHg), deranged BGL (66.7% vs. 35.3%), and reduction in kidney function (83.3% vs. 30.9%). Adherence appears to be related to inpatient clinical inertia and outpatient patient health literacy and empowerment. Copyright © 2017 Diabetes India. Published by Elsevier Ltd. All rights reserved.

Optimal Cable Tension Distribution of the High-Speed Redundant Driven Camera Robots Considering Cable Sag and Inertia Effects

Directory of Open Access Journals (Sweden)

Yu Su

2014-03-01

Full Text Available Camera robots are high-speed redundantly cable-driven parallel manipulators that realize the aerial panoramic photographing. When long-span cables and high maneuverability are involved, the effects of cable sags and inertias on the dynamics must be carefully dealt with. This paper is devoted to the optimal cable tension distribution (OCTD for short of the camera robots. Firstly, each fast varying-length cable is discretized into some nodes for computing the cable inertias. Secondly, the dynamic equation integrated with the cable inertias is set up regarding the large-span cables as catenaries. Thirdly, an iterative optimization algorithm is introduced for the cable tension distribution by using the dynamic equation and sag-to-span ratios as constraint conditions. Finally, numerical examples are presented to demonstrate the effects of cable sags and inertias on determining tensions. The results justify the convergence and effectiveness of the algorithm. In addition, the results show that it is necessary to take the cable sags and inertias into consideration for the large-span manipulators.

Thermal mapping of mountain slopes on Mars by application of a Differential Apparent Thermal Inertia technique

Science.gov (United States)

Kubiak, Marta; Mège, Daniel; Gurgurewicz, Joanna; Ciazela, Jakub

2015-04-01

Thermal inertia (P) is an important property of geologic surfaces that essentially describes the resistance to temperature (T) change as heat is added. Most remote sensing data describe the surface only. P is a volume property that is sensitive to the composition of the subsurface, down to a depth reached by the diurnal heating wave. As direct measurement of P is not possible on Mars, thermal inertia models (Fergason et al., 2006) and deductive methods (the Apparent Thermal Inertia: ATI and Differential Apparent Thermal Inertia: DATI) are used to estimate it. ATI is computed as (1 - A) / (Tday - Tnight), where A is albedo. Due to the lack of the thermal daytime images with maximum land surface temperature (LST) and nighttime images with minimum LST in Valles Marineris region, the ATI method is difficult to apply. Instead, we have explored the DATI technique (Sabol et al., 2006). DATI is calculated based on shorter time (t) intervals with a high |ΔT/Δt| gradient (in the morning or in the afternoon) and is proportional to the day/night temperature difference (ATI), and hence P. Mars, which exhibits exceptionally high |ΔT/Δt| gradients due to the lack of vegetation and thin atmosphere, is especially suitable for the DATI approach. Here we present a new deductive method for high-resolution differential apparent thermal inertia (DATI) mapping for areas of highly contrasted relief (e.g., Valles Marineris). Contrary to the thermal inertia models, our method takes local relief characteristics (slopes and aspects) into account. This is crucial as topography highly influences A and ΔT measurements. In spite of the different approach, DATI values in the flat areas are in the same range as the values obtained by Fergason et al. (2006). They provide, however, more accurate information for geological interpretations of hilly or mountainous terrains. Sabol, D. E., Gillespie, A. R., McDonald, E., and Danilina, I., 2006. Differential Thermal Inertia of Geological Surfaces. In

Cash seeking behaviour and migration: a place-to-place migration function for Cote d'Ivoire.

Science.gov (United States)

Velenchik, A D

1993-12-01

"This paper presents estimates of an aggregate place-to-place migration function for Cote d'Ivoire based on the premise that migration is motivated by rural residents' desire for cash income. The results indicate that migration from a region responds differently to changes in cash and food income, which supports the idea that it is the composition of rural income, and not just its level, that determines migration flows." excerpt

Task-set inertia and memory-consolidation bottleneck in dual tasks.

Science.gov (United States)

Koch, Iring; Rumiati, Raffaella I

2006-11-01

Three dual-task experiments examined the influence of processing a briefly presented visual object for deferred verbal report on performance in an unrelated auditory-manual reaction time (RT) task. RT was increased at short stimulus-onset asynchronies (SOAs) relative to long SOAs, showing that memory consolidation processes can produce a functional processing bottleneck in dual-task performance. In addition, the experiments manipulated the spatial compatibility of the orientation of the visual object and the side of the speeded manual response. This cross-task compatibility produced relative RT benefits only when the instruction for the visual task emphasized overlap at the level of response codes across the task sets (Experiment 1). However, once the effective task set was in place, it continued to produce cross-task compatibility effects even in single-task situations ("ignore" trials in Experiment 2) and when instructions for the visual task did not explicitly require spatial coding of object orientation (Experiment 3). Taken together, the data suggest a considerable degree of task-set inertia in dual-task performance, which is also reinforced by finding costs of switching task sequences (e.g., AC --> BC vs. BC --> BC) in Experiment 3.

Morning Sleep Inertia in Alertness and Performance: Effect of Cognitive Domain and White Light Conditions

Science.gov (United States)

Santhi, Nayantara; Groeger, John A.; Archer, Simon N.; Gimenez, Marina; Schlangen, Luc J. M.; Dijk, Derk-Jan

2013-01-01

The transition from sleep to wakefulness entails a temporary period of reduced alertness and impaired performance known as sleep inertia. The extent to which its severity varies with task and cognitive processes remains unclear. We examined sleep inertia in alertness, attention, working memory and cognitive throughput with the Karolinska Sleepiness Scale (KSS), the Psychomotor Vigilance Task (PVT), n-back and add tasks, respectively. The tasks were administered 2 hours before bedtime and at regular intervals for four hours, starting immediately after awakening in the morning, in eleven participants, in a four-way cross-over laboratory design. We also investigated whether exposure to Blue-Enhanced or Bright Blue-Enhanced white light would reduce sleep inertia. Alertness and all cognitive processes were impaired immediately upon awakening (pinertia varies with cognitive domain and that it’s spectral/intensity response to light is different from that of sleepiness. That is, just increasing blue-wavelength in light may not be sufficient to reduce sleep inertia. These findings have implications for critical professions like medicine, law-enforcement etc., in which, personnel routinely wake up from night-time sleep to respond to emergency situations. PMID:24260280

Monosodium glutamate-associated alterations in open field, anxiety-related and conditioned place preference behaviours in mice.

Science.gov (United States)

Onaolapo, Olakunle James; Aremu, Olaleye Samuel; Onaolapo, Adejoke Yetunde

2017-07-01

The present study investigated changes in behaviour associated with oral monosodium glutamate (a flavouring agent), using the open field, elevated plus maze and conditioned place preference (CPP) paradigms, respectively. Mice were assigned to two groups for CPP [monosodium glutamate (MSG)-naïve (n = 40) and MSG-pretreated (n = 40)] and two groups for open field (OF) and elevated plus maze (EPM) tests [n = 40 each], respectively. Animals in respective groups were then divided into four subgroups (n = 10) (vehicle or MSG (80, 160 and 320 mg/kg)). MSG-naïve mice were observed in the CPP box in three phases (pre-conditioning, conditioning and post-conditioning). Mice were conditioned to MSG or an equivalent volume of saline. The MSG pretreatment group received vehicle or respective doses of MSG daily for 21 days, prior to conditioning. Mice in the OF or EPM groups received vehicle or doses of MSG (orally) for 21 days, at 10 ml/kg. Open field or EPM behaviours were assessed on days 1 and 21. At the end of the experiments, mice in the OF groups were sacrificed and brain homogenates used to assay glutamate and glutamine. Results showed that administration of MSG was associated with a decrease in rearing, dose-related mixed horizontal locomotor, grooming and anxiety-related response and an increase in brain glutamate/glutamine levels. Following exposure to the CPP paradigm, MSG-naïve and MSG-pretreated mice both showed 'drug-paired' chamber preference. The study concluded that MSG (at the administered doses) was associated with changes in open field activities, anxiety-related behaviours and brain glutamate/glutamine levels; its ingestion also probably leads to a stimulation of the brain reward system.

The Impact of Fluid Inertia on In Vivo Estimation of Mitral Valve Leaflet Constitutive Properties and Mechanics.

Science.gov (United States)

Bark, David L; Dasi, Lakshmi P

2016-05-01

We examine the influence of the added mass effect (fluid inertia) on mitral valve leaflet stress during isovolumetric phases. To study this effect, oscillating flow is applied to a flexible membrane at various frequencies to control inertia. Resulting membrane strain is calculated through a three-dimensional reconstruction of markers from stereo images. To investigate the effect in vivo, the analysis is repeated on a published dataset for an ovine mitral valve (Journal of Biomechanics 42(16): 2697-2701). The membrane experiment demonstrates that the relationship between pressure and strain must be corrected with a fluid inertia term if the ratio of inertia to pressure differential approaches 1. In the mitral valve, this ratio reaches 0.7 during isovolumetric contraction for an acceleration of 6 m/s(2). Acceleration is reduced by 72% during isovolumetric relaxation. Fluid acceleration also varies along the leaflet during isovolumetric phases, resulting in spatial variations in stress. These results demonstrate that fluid inertia may be the source of the temporally and spatially varying stiffness measurements previously seen through inverse finite element analysis of in vivo data during isovolumetric phases. This study demonstrates that there is a need to account for added mass effects when analyzing in vivo constitutive relationships of heart valves.

Therapeutic inertia and intensified treatment in diabetes mellitus prescription patterns: A nationwide population-based study in Taiwan.

Science.gov (United States)

Huang, Li-Ying; Yeh, Hseng-Long; Yang, Ming-Chin; Shau, Wen-Yi; Su, Syi; Lai, Mei-Shu

2016-12-01

Objective To measure therapeutic inertia by characterizing prescription patterns using secondary data obtained from the nationwide diabetes mellitus pay-for-performance (DM-P4P) programme in Taiwan. Methods Using reimbursement claims from Taiwan's National Health Insurance Research Database, a nationwide retrospective cohort study was undertaken of patients with diabetes mellitus who participated in the DM-P4P programme from 2006-2008. Glycosylated haemoglobin results were used to evaluate modifications in therapy in response to poor diabetes control. Prescription patterns were used to assign patients to either a therapeutic inertia group or an intensified treatment group. Therapeutic inertia was defined as the failure to act on a known problem. Results The research sample comprised of 168 876 patients with diabetes mellitus who had undergone 899 135 tests. Of these, 37.4% (336 615 visits) of prescriptions were for a combination of two types of drug and 27.7% (248 788 visits) were for a combination of three types of drug. The proportion of patients in the intensified therapy group who were prescribed more than two types of drug was considerably higher than that in the therapeutic inertia group. Conclusion In many cases in the therapeutic inertia group only a single type of hypoglycaemic drug was prescribed or the dosage remained unchanged.

Effect on the variation of the moment of inertia in band K=1/2

International Nuclear Information System (INIS)

Liu Yanxin; Yu Shaoying; Inner Mongolia Univ. for Nationalities, Tongliao; Chinese Academy of Sciences, Beijing

2004-01-01

The effect on the variation of the moment of inertia in band 171 Yb[521]1/2 is investigated using the particle number conserving (PNC) method for treating the cranked shell model with monopole and Y 20 quadrupole pairing interactions. The experimental moments of inertia of 171 Yb[521]1/2 (signature α=±1/2) and the blocking effect of proton are reproduced well by the PNC calculation, in which no free parameter is involved. (authors)

Changing Provider Behavior in the Context of Chronic Disease Management: Focus on Clinical Inertia.

Science.gov (United States)

Lavoie, Kim L; Rash, Joshua A; Campbell, Tavis S

2017-01-06

Widespread acceptance of evidence-based medicine has led to the proliferation of clinical practice guidelines as the primary mode of communicating current best practices across a range of chronic diseases. Despite overwhelming evidence supporting the benefits of their use, there is a long history of poor uptake by providers. Nonadherence to clinical practice guidelines is referred to as clinical inertia and represents provider failure to initiate or intensify treatment despite a clear indication to do so. Here we review evidence for the ubiquity of clinical inertia across a variety of chronic health conditions, as well as the organizational and system, patient, and provider factors that serve to maintain it. Limitations are highlighted in the emerging literature examining interventions to reduce clinical inertia. An evidence-based framework to address these limitations is proposed that uses behavior change theory and advocates for shared decision making and enhanced guideline development and dissemination.

Proactive control for solar energy exploitation: A german high-inertia building case study

International Nuclear Information System (INIS)

Michailidis, Iakovos T.; Baldi, Simone; Pichler, Martin F.; Kosmatopoulos, Elias B.; Santiago, Juan R.

2015-01-01

Highlights: • Solar gains exploitation by utilizing large glass facades and concrete core thermal energy storing capacity. • Efficient Building Energy Management in a well-insulated modern building construction. • Energy consumption reduction by maintaining user comfort. • High inertia large scale office building test case, located in Germany. - Abstract: Energy efficient passive designs and constructions have been extensively studied in the last decades as a way to improve the ability of a building to store thermal energy, increase its thermal mass, increase passive insulation and reduce heat losses. However, many studies show that passive thermal designs alone are not enough to fully exploit the potential for energy efficiency in buildings: in fact, harmonizing the active elements for indoor thermal comfort with the passive design of the building can lead to further improvements in both energy efficiency and comfort. These improvements can be achieved via the design of appropriate Building Optimization and Control (BOC) systems, a task which is more complex in high-inertia buildings than in conventional ones. This is because high thermal mass implies a high memory, so that wrong control decisions will have negative repercussions over long time horizons. The design of proactive control strategies with the capability of acting in advance of a future situation, rather than just reacting to current conditions, is of crucial importance for a full exploitation of the capabilities of a high-inertia building. This paper applies a simulation-assisted control methodology to a high-inertia building in Kassel, Germany. A simulation model of the building is used to proactively optimize, using both current and future information about the external weather condition and the building state, a combined criterion composed of the energy consumption and the thermal comfort index. Both extensive simulation as well as real-life experiments performed during the unstable German

Analysis of Warren and X-trussed continuous beam by equivalent stiffness matrices and moments of inertia

International Nuclear Information System (INIS)

Soares, J.M.D.

1984-01-01

This work study the resolution of Warren and X-trussed continuous beams using equivalent stiffness coefficients and moments of inertia. The equilibrium equations in the generic Joint r are obtained by finite differences method and the deflections and arbitrary static load equations are present in finite Fourier series form. The results of illustrative examples for both kinds of trussed be beams are compared with solutions obtained with the Lorane Linear Program. The influence of panels number and comparisions with classic result of equivalent inertia are established. Abacus for X-trussed beams for stiffness coefficients obtained by series versus equivalent inertia stiffness coefficients and corrections using the top and bottom chords area are presented. (Author) [pt

Effective moments of inertia and spin cut off parameters in Hf isotopes

International Nuclear Information System (INIS)

Razavi, R.; Sharifzadeh, N.; Farahmand, M.R.

2011-01-01

In all statistical theories the nuclear level density is the most characteristic quantity and plays a major role in the study of nuclear structure. Most experimental data on nuclear level density have been analyzed with analytical functions of the level density. On the basis of statistical models, the effective moments of inertia and spin cut off parameters have been determined for 176 Hf, 178 Hf and 180 Hf nuclei from extensive and complete level schemes and neutron resonance densities in low excitation energy levels. Then, moments of inertia of these nuclei have been determined by nuclear rotational model. The results have been compared with their corresponding rigid body value

Microstructural Characterization of Thermomechanical and Heat-Affected Zones of an Inertia Friction Welded Astroloy

Science.gov (United States)

Oluwasegun, K. M.; Olawale, J. O.; Ige, O. O.; Shittu, M. D.; Adeleke, A. A.; Malomo, B. O.

2014-08-01

The behaviour of γ' phase to thermal and mechanical effects during rapid heating of Astroloy, a powder metallurgy nickel-based superalloy has been investigated. The thermo-mechanical-affected zone (TMAZ) and heat-affected zone (HAZ) microstructures of an inertia friction welded (IFW) Astroloy were simulated using a Gleeble thermo-mechanical simulation system. Detailed microstructural examination of the simulated TMAZ and HAZ and those present in actual IFW specimens showed that γ' particles persisted during rapid heating up to a temperature where the formation of liquid is thermodynamically favored and subsequently re-solidified eutectically. The result obtained showed that forging during the thermo-mechanical simulation significantly enhanced resistance to weld liquation cracking of the alloy. This is attributable to strain-induced rapid isothermal dissolution of the constitutional liquation products within 150 μm from the center of the forged sample. This was not observed in purely thermally simulated samples. The microstructure within the TMAZ of the as-welded alloy is similar to the microstructure in the forged Gleeble specimens.

Transition from geostrophic turbulence to inertia-gravity waves in the atmospheric energy spectrum.

Science.gov (United States)

Callies, Jörn; Ferrari, Raffaele; Bühler, Oliver

2014-12-02

Midlatitude fluctuations of the atmospheric winds on scales of thousands of kilometers, the most energetic of such fluctuations, are strongly constrained by the Earth's rotation and the atmosphere's stratification. As a result of these constraints, the flow is quasi-2D and energy is trapped at large scales—nonlinear turbulent interactions transfer energy to larger scales, but not to smaller scales. Aircraft observations of wind and temperature near the tropopause indicate that fluctuations at horizontal scales smaller than about 500 km are more energetic than expected from these quasi-2D dynamics. We present an analysis of the observations that indicates that these smaller-scale motions are due to approximately linear inertia-gravity waves, contrary to recent claims that these scales are strongly turbulent. Specifically, the aircraft velocity and temperature measurements are separated into two components: one due to the quasi-2D dynamics and one due to linear inertia-gravity waves. Quasi-2D dynamics dominate at scales larger than 500 km; inertia-gravity waves dominate at scales smaller than 500 km.

[Morphological features of the myometrium in connective tissue dysplasia in women with uterine inertia].

Science.gov (United States)

Konovalov, P V; Mitrofanova, L B; Gorshkov, A N; Ovsyannikov, F A

2015-01-01

to reveal the morphological features of the lower uterine segment myometrium in connective tissue dysplasia (CTD) in women with uterine inertia. Histological, immunohistochemical (with antibodies against collagen types I and III, matrix metalloproteinases 1 and 9 (MMR-1, MMP-9), tissue inhibitor of metalloproteinase 1 (TIMP-1), fibronectin; fibulin-5, connexin-43), electron microscopic, and electron immunocytochemical studies with morphometry of myometrial fragments from 15 parturient women with CTD and uterine inertia (a study group) and those from 10 women without CTD (a control group). The myometrium in CTD exhibited the decreased expression of connextin-43, fibulin-5, TIMP-1, collagens types I and III with collagen type III predominance and the unchanged levels of fibronectin and MMP-1 and MMP-9. Electron microscopy and immunocytochemistry showed fewer intercellular contacts and the dramatically lower expression of connexin-43 than in the control. A set of found myometrial changes in women with uterine inertia is a manifestation of CTD.

Morning sleep inertia in alertness and performance: effect of cognitive domain and white light conditions.

Directory of Open Access Journals (Sweden)

Nayantara Santhi

Full Text Available The transition from sleep to wakefulness entails a temporary period of reduced alertness and impaired performance known as sleep inertia. The extent to which its severity varies with task and cognitive processes remains unclear. We examined sleep inertia in alertness, attention, working memory and cognitive throughput with the Karolinska Sleepiness Scale (KSS, the Psychomotor Vigilance Task (PVT, n-back and add tasks, respectively. The tasks were administered 2 hours before bedtime and at regular intervals for four hours, starting immediately after awakening in the morning, in eleven participants, in a four-way cross-over laboratory design. We also investigated whether exposure to Blue-Enhanced or Bright Blue-Enhanced white light would reduce sleep inertia. Alertness and all cognitive processes were impaired immediately upon awakening (p<0.01. However, alertness and sustained attention were more affected than cognitive throughput and working memory. Moreover, speed was more affected than accuracy of responses. The light conditions had no differential effect on performance except in the 3-back task (p<0.01, where response times (RT at the end of four hours in the two Blue-Enhanced white light conditions were faster (200 ms than at wake time. We conclude that the effect of sleep inertia varies with cognitive domain and that it's spectral/intensity response to light is different from that of sleepiness. That is, just increasing blue-wavelength in light may not be sufficient to reduce sleep inertia. These findings have implications for critical professions like medicine, law-enforcement etc., in which, personnel routinely wake up from night-time sleep to respond to emergency situations.

Calculations of mass and moment of inertia for neutron stars

International Nuclear Information System (INIS)

Moelnvik, T.; Oestgaard, E.

1985-01-01

Masses and moments of inertia for slowly-rotating neutron stars are calculated from the Tolman-Oppenheimer-Volkoff equations and various equations of state for neutron-star matter. We have also obtained pressure and density as a function of the distance from the centre of the star. Generally, two different equations of state are applied for particle densities n>0.47 fm -3 and n -3 . The maximum mass is, in our calculations for all equations of state except for the unrealistic non-relativistic ideal Fermi gas, given by 1.50 Msub(sun) 44 gxcm 2 45 gxcm 2 , which also seem to agree very well with 'experimental results'. The radius of the star corresponding to maximum mass and maximum moment of inertia is given by 8.2 km< R<10.0 km, but a smaller central density rhosub(c) will give a larger radius. (orig.)

Branding the Destination Versus the Place

DEFF Research Database (Denmark)

Zenker, Sebastian; Braun, Erik; Petersen, Sibylle

2017-01-01

This article contributes to a broader understanding of how the branding of places affects both residents and tourists. While branding often relies on simplified messages, the effectiveness of such strategies for complex brands remains questionable. Residents in particular possess a confounded...... knowledge of the place and could disagree with simplified destination brands. To test the role of brand complexity for residents and tourists, we conducted two empirical studies (N = 765; N = 385), showing that, for residents, positive place attitude (i.e., place satisfaction, identification, and attachment......) and place behaviour (i.e., positive word-of-mouth) increase with a higher brand complexity. The second study shows that the positive relationship of brand complexity is stronger for residents than for tourists, supporting the conclusion that brand complexity is relevant for place brands, but that the place...

Crustal moment of inertia of glitching pulsars with the KDE0v1 Skyrme interaction

Energy Technology Data Exchange (ETDEWEB)

Madhuri, K.; Routray, T.R.; Pattnaik, S.P. [Sambalpur University, School of Physics, Jyotivihar (India); Basu, D.N. [Variable Energy Cyclotron Center, Kolkata (India)

2017-07-15

The mass, radius and crustal fraction of moment of inertia in neutron stars are calculated using β-equilibrated nuclear matter obtained from the Skyrme effective interaction. The transition density, pressure and proton fraction at the inner edge separating the liquid core from the solid crust of the neutron stars are determined from the thermodynamic stability conditions using the KDE0v1 set. The neutron star masses obtained by solving the Tolman-Oppenheimer-Volkoff equations using neutron star matter obtained from this set are able to describe highly massive compact stars ∝ 2M {sub CircleDot}. The crustal fraction of the moment of inertia can be extracted from studying pulsar glitches. This fraction is highly dependent on the core-crust transition pressure and corresponding density. These results for pressure and density at core-crust transition together with the observed minimum crustal fraction of the total moment of inertia provide a limit for the radius of the Vela pulsar, R ≥ 3.69 + 3.44M/M {sub CircleDot}. Present calculations suggest that the crustal fraction of the total moment of inertia can be ∝ 6.3% due to crustal entrainment caused by the Bragg reflection of unbound neutrons by lattice ions. (orig.)

Time to do more: addressing clinical inertia in the management of type 2 diabetes mellitus.

Science.gov (United States)

Strain, W D; Cos, X; Hirst, M; Vencio, S; Mohan, V; Vokó, Z; Yabe, D; Blüher, M; Paldánius, P M

2014-09-01

Clinical inertia, the tendency to maintain current treatment strategies despite results demanding escalation, is thought to substantially contribute to the disconnect between clinical aspirations for patients with diabetes and targets achieved. We wished to explore potential causes of clinical inertia among physicians and people with diabetes. A 20-min online survey of 652 adults with diabetes and 337 treating physicians in six countries explored opinions relating to clinical inertia from both perspectives, in order to correlate perceptions and expectations relating to diagnosis, treatment, diabetes complications and therapeutic escalation. Physicians had low expectations for their patients, despite the belief that the importance of good glycaemic control through lifestyle and pharmacological interventions had been adequately conveyed. Conversely, people with diabetes had, at best, a rudimentary understanding of the risks of complications and the importance of good control; indeed, only a small proportion believed lifestyle changes were important and the majority did not intend to comply. The principal findings of this survey suggest that impairments in communication are at the heart of clinical inertia. This manuscript lays out four key principles that we believe are achievable in all environments and can improve the lives of people with diabetes. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Inertia-confining thermonuclear molten salt reactors

International Nuclear Information System (INIS)

Furukawa, Kazuo; Yamanaka, Chiyoe; Nakai, Sadao; Imon, Shunji; Nakajima, Hidenori; Nakamura, Norio; Kato, Yoshio.

1984-01-01

Purpose: To increase the heat generating efficiency while improving the reactor safety and thereby maintaining the energy balance throughout the reactor. Constitution: In an inertia-confining type D-T thermonuclear reactor, the blanket is made of lithium-containing fluoride molten salts (LiF.BeF 2 , LiF.NaF.KF, LiF.KF, etc) which are cascaded downwardly in a large thickness (50 - 100 cm) along the inner wall of the thermonuclear reaction vessel, and neutrons generated by explosive compression are absorbed to lithium in the molten salts to produce tritium, Heat transportation is carried out by the molten salts. (Ikeda, J.)

Experimental study of the conventional equation to determine a plate's moment of inertia

International Nuclear Information System (INIS)

Pintao, Carlos A F; Filho, Moacir P de Souza; Grandini, Carlos R; Hessel, Roberto

2004-01-01

In this work, we describe an experimental setup in which an electric current is used to determine the angular velocity attained by a plate rotating around a shaft in response to a torque applied for a given period. Based on this information, we show how the moment of inertia of a plate can be determined using a procedure that differs considerably from the ones most commonly used, which generally involve time measurements. Some experimental results are also presented which allow one to determine parameters such as the exponents and constant of the conventional equation of a plate's moment of inertia

Trade-off Analysis of Virtual Inertia and Fast Primary Frequency Control During Frequency Transients in a Converter Dominated Network

DEFF Research Database (Denmark)

Rezkalla, Michel M.N.; Marinelli, Mattia; Pertl, Michael

2016-01-01

Traditionally the electricity generation is based on rotating synchronous machines which provide inertia to the power system.The increasing share of converter connected energy sources reduces the available rotational inertia in the power system leading to faster frequency dynamics, which may cause...... more critical frequency excursions. Both, virtual inertia and fast primary control could serve as a solution to improvefrequency stability, however, their respective impacts on the system have different consequences, so that the trade-off is not straightforward. This study presents a comparative...... analysis of virtual inertiaand a fast primary control algorithms with respect to rate of change of frequency (ROCOF), frequency nadir and steady state value considering the effect of the dead time which is carried out by a sensitivity analysis. The investigation shows that the virtual inertia controller...

Lost opportunities in HIV prevention: programmes miss places where exposures are highest

Science.gov (United States)

Sandøy, Ingvild F; Siziya, Seter; Fylkesnes, Knut

2008-01-01

Background Efforts at HIV prevention that focus on high risk places might be more effective and less stigmatizing than those targeting high risk groups. The objective of the present study was to assess risk behaviour patterns, signs of current preventive interventions and apparent gaps in places where the risk of HIV transmission is high and in communities with high HIV prevalence. Methods The PLACE method was used to collect data. Inhabitants of selected communities in Lusaka and Livingstone were interviewed about where people met new sexual partners. Signs of HIV preventive activities in these places were recorded. At selected venues, people were interviewed about their sexual behaviour. Peer educators and staff of NGOs were also interviewed. Results The places identified were mostly bars, restaurants or sherbeens, and fewer than 20% reported any HIV preventive activity such as meetings, pamphlets or posters. In 43% of places in Livingstone and 26% in Lusaka, condoms were never available. There were few active peer educators. Among the 432 persons in Lusaka and 676 in Livingstone who were invited for interview about sexual behaviour, consistent condom use was relatively high in Lusaka (77%) but low in Livingstone (44% of men and 34% of women). Having no condom available was the most common reason for not using one. Condom use in Livingstone was higher among individuals socializing in places where condoms always were available. Conclusion In the places studied we found a high prevalence of behaviours with a high potential for HIV transmission but few signs of HIV preventive interventions. Covering the gaps in prevention in these high exposure places should be given the highest priority. PMID:18218124

The neutron-proton pairing and the moments of inertia of the rare earth even-even nuclei

International Nuclear Information System (INIS)

Calik, A. E.; Deniz, C.; Gerceklioglu, M.

2009-01-01

In this study, the possible effect of the neutron-proton pairing interaction in the heavy nuclei has been investigated in the framework of the BCS model by making a simple approximation. This effect has been searched realistically by calculating the moments of inertia of deformed even-even nuclei. Calculations show that the moments of inertia of rare earth nuclei changed dramatically and approached the experimental values.

'What the hell is water?' How to use deliberate clinical inertia in common emergency department situations.

Science.gov (United States)

Egerton-Warburton, Diana; Cullen, Louise; Keijzers, Gerben; Fatovich, Daniel M

2018-06-01

Appropriate deliberate clinical inertia refers to the art of doing nothing as a positive clinical response. It includes shared decision-making to improve patient care with the use of clinical judgement. We discuss common clinical scenarios where the use of deliberate clinical inertia can occur. The insertion of peripheral intravenous cannulae, investigating patients with suspected renal colic and the investigation of low risk chest pain are all opportunities for the thoughtful clinician to 'stand there' and use effective patient communication to avoid low value tests and procedures. Awareness is key to identifying these opportunities to practice deliberate clinical inertia, as many of the situations may be so much a part of our environment that they are hidden in plain view. © 2018 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Dynamic contraction behaviour of pneumatic artificial muscle

Science.gov (United States)

Doumit, Marc D.; Pardoel, Scott

2017-07-01

The development of a dynamic model for the Pneumatic Artificial Muscle (PAM) is an imperative undertaking for understanding and analyzing the behaviour of the PAM as a function of time. This paper proposes a Newtonian based dynamic PAM model that includes the modeling of the muscle geometry, force, inertia, fluid dynamic, static and dynamic friction, heat transfer and valve flow while ignoring the effect of bladder elasticity. This modeling contribution allows the designer to predict, analyze and optimize PAM performance prior to its development. Thus advancing successful implementations of PAM based powered exoskeletons and medical systems. To date, most muscle dynamic properties are determined experimentally, furthermore, no analytical models that can accurately predict the muscle's dynamic behaviour are found in the literature. Most developed analytical models adequately predict the muscle force in static cases but neglect the behaviour of the system in the transient response. This could be attributed to the highly challenging task of deriving such a dynamic model given the number of system elements that need to be identified and the system's highly non-linear properties. The proposed dynamic model in this paper is successfully simulated through MATLAB programing and validated the pressure, contraction distance and muscle temperature with experimental testing that is conducted with in-house built prototype PAM's.

Global distribution of bedrock exposures on Mars using THEMIS high-resolution thermal inertia

Science.gov (United States)

Edwards, C.S.; Bandfield, J.L.; Christensen, P.R.; Fergason, R.L.

2009-01-01

We investigate high thermal inertia surfaces using the Mars Odyssey Thermal Emission Imaging System (THEMIS) nighttime temperature images (100 m/pixel spatial sampling). For this study, we interpret any pixel in a THEMIS image with a thermal inertia over 1200 J m-2 K-1 s-1/2 as "bedrock" which represents either in situ rock exposures or rock-dominated surfaces. Three distinct morphologies, ranked from most to least common, are associated with these high thermal inertia surfaces: (1) valley and crater walls associated with mass wasting and high surface slope angles; (2) floors of craters with diameters >25 km and containing melt or volcanics associated with larger, high-energy impacts; and (3) intercrater surfaces with compositions significantly more mafic than the surrounding regolith. In general, bedrock instances on Mars occur as small exposures (less than several square kilometers) situated in lower-albedo (inertia (>350 J m-2 K-1 s-1/2), and relatively dust-free (dust cover index <0.95) regions; however, there are instances that do not follow these generalizations. Most instances are concentrated in the southern highlands, with very few located at high latitudes (poleward of 45oN and 58oS), suggesting enhanced mechanical breakdown probably associated with permafrost. Overall, Mars has very little exposed bedrock with only 960 instances identified from 75oS to 75oN with likely <3500 km2 exposed, representing???1% of the total surface area. These data indicate that Mars has likely undergone large-scale surface processing and reworking, both chemically and mechanically, either destroying or masking a majority of the bedrock exposures on the planet. Copyright 2009 by the American Geophysical Union.

Modelling the spatial behaviour of a tropical tuna purse seine fleet.

Directory of Open Access Journals (Sweden)

Tim K Davies

Full Text Available Industrial tuna fisheries operate in the Indian, Atlantic and Pacific Oceans, but concerns over sustainability and environmental impacts of these fisheries have resulted in increased scrutiny of how they are managed. An important but often overlooked factor in the success or failure of tuna fisheries management is the behaviour of fishers and fishing fleets. Uncertainty in how a fishing fleet will respond to management or other influences can be reduced by anticipating fleet behaviour, although to date there has been little research directed at understanding and anticipating the human dimension of tuna fisheries. The aim of this study was to address gaps in knowledge of the behaviour of tuna fleets, using the Indian Ocean tropical tuna purse seine fishery as a case study. We use statistical modelling to examine the factors that influence the spatial behaviour of the purse seine fleet at broad spatiotemporal scales. This analysis reveals very high consistency between years in the use of seasonal fishing grounds by the fleet, as well as a forcing influence of biophysical ocean conditions on the distribution of fishing effort. These findings suggest strong inertia in the spatial behaviour of the fleet, which has important implications for predicting the response of the fleet to natural events or management measures (e.g., spatial closures.

[The concentration of ionized and total calcium in the blood of female dogs with uterine inertia].

Science.gov (United States)

Kraus, A; Schwab, A

1990-12-01

Blood values of calcium, inorganic phosphate and magnesium were estimated in 26 bitches one day before parturition, on the day of parturition and daily for 6 days post partum. In 17 of these 26 animals the diagnosis was dystocia because of uterine inertia. A comparison of calcium levels between those bitches giving birth spontaneously and those requiring assistance gave no indication that blood calcium deficiency was the cause of uterine inertia.

An Endogenous Circadian Rhythm in Sleep Inertia Results in Greatest Cognitive Impairment upon Awakening during the Biological Night

Science.gov (United States)

Scheer, Frank A. J. L.; Shea, Thomas J.; Hilton, Michael F.; Shea, Steven A.

2011-01-01

Sleep inertia is the impaired cognitive performance immediately upon awakening, which decays over tens of minutes. This phenomenon has relevance to people who need to make important decisions soon after awakening, such as on-call emergency workers. Such awakenings can occur at varied times of day or night, so the objective of the study was to determine whether or not the magnitude of sleep inertia varies according to the phase of the endogenous circadian cycle. Twelve adults (mean, 24 years; 7 men) with no medical disorders other than mild asthma were studied. Following 2 baseline days and nights, subjects underwent a forced desynchrony protocol composed of seven 28-h sleep/wake cycles, while maintaining a sleep/wakefulness ratio of 1:2 throughout. Subjects were awakened by a standardized auditory stimulus 3 times each sleep period for sleep inertia assessments. The magnitude of sleep inertia was quantified as the change in cognitive performance (number of correct additions in a 2-min serial addition test) across the first 20 min of wakefulness. Circadian phase was estimated from core body temperature (fitted temperature minimum assigned 0°). Data were segregated according to: (1) circadian phase (60° bins); (2) sleep stage; and (3) 3rd of the night after which awakenings occurred (i.e., tertiary 1, 2, or 3). To control for any effect of sleep stage, the circadian rhythm of sleep inertia was initially assessed following awakenings from Stage 2 (62% of awakening occurred from this stage; n = 110). This revealed a significant circadian rhythm in the sleep inertia of cognitive performance (p = 0.007), which was 3.6 times larger during the biological night (circadian bin 300°, ~2300–0300 h in these subjects) than during the biological day (bin 180°, ~1500–1900 h). The circadian rhythm in sleep inertia was still present when awakenings from all sleep stages were included (p = 0.004), and this rhythm could not be explained by changes in underlying sleep drive

Duration of sleep inertia after napping during simulated night work and in extended operations.

Science.gov (United States)

Signal, Tracey Leigh; van den Berg, Margo J; Mulrine, Hannah M; Gander, Philippa H

2012-07-01

Due to the mixed findings of previous studies, it is still difficult to provide guidance on how to best manage sleep inertia after waking from naps in operational settings. One of the few factors that can be manipulated is the duration of the nap opportunity. The aim of the present study was to investigate the magnitude and time course of sleep inertia after waking from short (20-, 40- or 60-min) naps during simulated night work and extended operations. In addition, the effect of sleep stage on awakening and duration of slow wave sleep (SWS) on sleep inertia was assessed. Two within-subject protocols were conducted in a controlled laboratory setting. Twenty-four healthy young men (Protocol 1: n = 12, mean age = 25.1 yrs; Protocol 2: n = 12, mean age = 23.2 yrs) were provided with nap opportunities of 20-, 40-, and 60-min (and a control condition of no nap) ending at 02:00 h after ∼20 h of wakefulness (Protocol 1 [P1]: simulated night work) or ending at 12:00 h after ∼30 h of wakefulness (Protocol 2 [P2]: simulated extended operations). A 6-min test battery, including the Karolinska Sleepiness Scale (KSS) and the 4-min 2-Back Working Memory Task (WMT), was repeated every 15 min the first hour after waking. Nap sleep was recorded polysomnographically, and in all nap opportunities sleep onset latency was short and sleep efficiency high. Mixed-model analyses of variance (ANOVA) for repeated measures were calculated and included the factors time (time post-nap), nap opportunity (duration of nap provided), order (order in which the four protocols were completed), and the interaction of these terms. Results showed no test x nap opportunity effect (i.e., no effect of sleep inertia) on KSS. However, WMT performance was impaired (slower reaction time, fewer correct responses, and increased omissions) on the first test post-nap, primarily after a 40- or 60-min nap. In P2 only, performance improvement was evident 45 min post-awakening for naps of 40 min or more. In ANOVAs

Free piston inertia compressor

Science.gov (United States)

Richards, W.D.C.; Bilodeau, D.; Marusak, T.; Dutram, L. Jr.; Brady, J.

A free piston inertia compressor comprises a piston assembly including a connecting rod having pistons on both ends, the cylinder being split into two substantially identical portions by a seal through which the connecting rod passes. Vents in the cylinder wall are provided near the seal to permit gas to escape the cylinder until the piston covers the vent whereupon the remaining gas in the cylinder functions as a gas spring and cushions the piston against impact on the seal. The connecting rod has a central portion of relatively small diameter providing free play of the connecting rod through the seal and end portions of relatively large diameter providing a limited tolerance between the connecting rod and the seal. Finally, the seal comprises a seal ring assembly consisting of a dampener plate, a free floating seal at the center of the dampener plate and a seal retainer plate in one face of the dampener plate.

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES (Ⅵ)-CONSERVATION LAWS OF MASS AND INERTIA

Institute of Scientific and Technical Information of China (English)

戴安民

2003-01-01

The purpose is to reestablish the coupled conservation laws, the local conservation equations and the jump conditions of mass and inertia for polar continuum theories. In this connection the new material derivatives of the deformation gradient, the line element, the surface element and the volume element were derived and the generalized Reynolds transport theorem was presented. Combining these conservation laws of mass and inertia with the balance laws of momentum, angular momentum and energy derived in our previous papers of this series, a rather complete system of coupled basic laws and principles for polar continuum theories is constituted on the whole. From this system the coupled nonlocal balance equations of mass, inertia, momentum, angular momentum and energy may be obtained by the usual localization.

Frequency Inertia Response Control of SCESS-DFIG under Fluctuating Wind Speeds Based on Extended State Observers

Directory of Open Access Journals (Sweden)

Dongyang Sun

2018-04-01

Full Text Available Insufficient frequency regulation capability and system inertia reduction are common problems encountered in a power grid with high wind power penetration, mainly due to the reason that the rotor energy in doubly fed induction generators (DFIGs is isolated by the grid side converters (GSCs, and also due to the randomness and intermittence of wind power which are not as stable as traditional thermal power sources. In this paper, the frequency inertia response control of a DFIG system under variable wind speeds was investigated. First, a DFIG system topology with rotor-side supercapacitor energy storage system (SCESS-DFIG was introduced. Then a control strategy for frequency inertia response of SCESS-DFIG power grid under fluctuating wind speed was designed, with two extended state observers (ESOs which estimate the mechanical power captured by the DFIG and the required inertia response power at the grid frequency drops, respectively. Based on one inconstant wind speed model and the SCESS-DFIG system model adopting the control strategy established, one power grid system consisting of three SCESS-DFIGs with different wind speed trends and a synchronous generator was simulated. The simulation results verified the effectiveness of the SCESS-DFIG system structure and the control strategy proposed.

Emergence of Distinct Spatial Patterns in Cellular Automata with Inertia: A Phase Transition-Like Behavior

Directory of Open Access Journals (Sweden)

Klaus Kramer

2017-03-01

Full Text Available We propose a Cellular Automata (CA model in which three ubiquitous and relevant processes in nature are present, namely, spatial competition, distinction between dynamically stronger and weaker agents and the existence of an inner resistance to changes in the actual state S n (=−1,0,+1 of each CA lattice cell n (which we call inertia. Considering ensembles of initial lattices, we study the average properties of the CA final stationary configuration structures resulting from the system time evolution. Assuming the inertia a (proper control parameter, we identify qualitative changes in the CA spatial patterns resembling usual phase transitions. Interestingly, some of the observed features may be associated with continuous transitions (critical phenomena. However, certain quantities seem to present jumps, typical of discontinuous transitions. We argue that these apparent contradictory findings can be attributed to the inertia parameter’s discrete character. Along the work, we also briefly discuss a few potential applications for the present CA formulation.

Study on Inertia as a Gravity Induced Property of Mass, in an Infinite Hubble Expanding Universe

Directory of Open Access Journals (Sweden)

Jeroen van Engelshoven

2013-01-01

Full Text Available Mass is experienced to have two intrinsic properties: inertia (resistance to acceleration and gravity (attraction to other masses. In this paper we evaluate the gravitational effect of all masses of the universe on an accelerated mass, starting from linearized general relativity. The gravitational interaction of all masses in a finite static universe model is shown to create a finite resistance to acceleration, which is inertia. Then, we propose a generalization of the linearized theory and evaluate the Hubble expanding universe. It is shown that the gravitational impact of an infinite expanding universe creates finite inertia, according to . The Friedmann critical mass density is found to be valid. The Mach principle is made explicit. The value and sign of the gravitational constant G are found to be of no consequence on an astronomical scale.

On the carrier of inertia

Directory of Open Access Journals (Sweden)

Patrick Grahn

2018-03-01

Full Text Available A change in momentum will inevitably perturb the all-embracing vacuum, whose reaction we understand as inertia. Since the vacuum’s physical properties relate to light, we propose that the vacuum embodies photons, but in pairs without net electromagnetic fields. In this physical form the free space houses energy in balance with the energy of matter in the whole Universe. Likewise, we reason that a local gravitational potential is the vacuum in a local balance with energy that is bound to a body. Since a body couples to the same vacuum universally and locally, we understand that inertial and gravitational masses are identical. By the same token, we infer that gravity and electromagnetism share the similar functional form because both are carried by the vacuum photons as paired and unpaired.

The Effect of Moment of Inertia on the Liquids in Centrifugal Microfluidics

Directory of Open Access Journals (Sweden)

Esmail Pishbin

2016-12-01

Full Text Available The flow of liquids in centrifugal microfluidics is unidirectional and dominated by centrifugal and Coriolis forces (i.e., effective only at T-junctions. Developing mechanisms and discovering efficient techniques to propel liquids in any direction other than the direction of the centrifugal force has been the subject of a large number of studies. The capillary force attained by specific surface treatments, pneumatic energy, active and passive flow reciprocation and Euler force have been previously introduced in order to manipulate the liquid flow and push it against the centrifugal force. Here, as a new method, the moment of inertia of the liquid inside a chamber in a centrifugal microfluidic platform is employed to manipulate the flow and propel the liquid passively towards the disc center. Furthermore, the effect of the moment of inertia on the liquid in a rectangular chamber is evaluated, both in theory and experiments, and the optimum geometry is defined. As an application of the introduced method, the moment of inertia of the liquid is used in order to mix two different dyed deionized (DI waters; the mixing efficiency is evaluated and compared to similar mixing techniques. The results show the potential of the presented method for pumping liquids radially inward with relatively high flow rates (up to 23 mm3/s and also efficient mixing in centrifugal microfluidic platforms.

Whether and How to Select Inertia and Acceleration of Discrete Particle Swarm Optimization Algorithm: A Study on Channel Assignment

Directory of Open Access Journals (Sweden)

Min Jin

2014-01-01

Full Text Available There is recently a great deal of interest and excitement in understanding the role of inertia and acceleration in the motion equation of discrete particle swarm optimization (DPSO algorithms. It still remains unknown whether the inertia section should be abandoned and how to select the appropriate acceleration in order for DPSO to show the best convergence performance. Adopting channel assignment as a case study, this paper systematically conducts experimental filtering research on this issue. Compared with other channel assignment schemes, the proposed scheme and the selection of inertia and acceleration are verified to have the advantage to channel assignment in three respects of convergence rate, convergence speed, and the independency of the quality of initial solution. Furthermore, the experimental result implies that DSPO might have the best convergence performance when its motion equation includes an inertia section in a less medium weight, a bigger acceleration coefficient for global-search optimum, and a smaller acceleration coefficient for individual-search optimum.

THERMAL PHASES OF EARTH-LIKE PLANETS: ESTIMATING THERMAL INERTIA FROM ECCENTRICITY, OBLIQUITY, AND DIURNAL FORCING

International Nuclear Information System (INIS)

Cowan, Nicolas B.; Voigt, Aiko; Abbot, Dorian S.

2012-01-01

In order to understand the climate on terrestrial planets orbiting nearby Sun-like stars, one would like to know their thermal inertia. We use a global climate model to simulate the thermal phase variations of Earth analogs and test whether these data could distinguish between planets with different heat storage and heat transport characteristics. In particular, we consider a temperate climate with polar ice caps (like the modern Earth) and a snowball state where the oceans are globally covered in ice. We first quantitatively study the periodic radiative forcing from, and climatic response to, rotation, obliquity, and eccentricity. Orbital eccentricity and seasonal changes in albedo cause variations in the global-mean absorbed flux. The responses of the two climates to these global seasons indicate that the temperate planet has 3× the bulk heat capacity of the snowball planet due to the presence of liquid water oceans. The obliquity seasons in the temperate simulation are weaker than one would expect based on thermal inertia alone; this is due to cross-equatorial oceanic and atmospheric energy transport. Thermal inertia and cross-equatorial heat transport have qualitatively different effects on obliquity seasons, insofar as heat transport tends to reduce seasonal amplitude without inducing a phase lag. For an Earth-like planet, however, this effect is masked by the mixing of signals from low thermal inertia regions (sea ice and land) with that from high thermal inertia regions (oceans), which also produces a damped response with small phase lag. We then simulate thermal light curves as they would appear to a high-contrast imaging mission (TPF-I/Darwin). In order of importance to the present simulations, which use modern-Earth orbital parameters, the three drivers of thermal phase variations are (1) obliquity seasons, (2) diurnal cycle, and (3) global seasons. Obliquity seasons are the dominant source of phase variations for most viewing angles. A pole-on observer

THERMAL PHASES OF EARTH-LIKE PLANETS: ESTIMATING THERMAL INERTIA FROM ECCENTRICITY, OBLIQUITY, AND DIURNAL FORCING

Energy Technology Data Exchange (ETDEWEB)

Cowan, Nicolas B. [Center for Interdisciplinary Exploration and Research in Astrophysics and Department of Physics and Astronomy, Northwestern University, 2131 Tech Drive, Evanston, IL 60208 (United States); Voigt, Aiko [Max Planck Institute for Meteorology, Bundesstr. 53, D-20146 Hamburg (Germany); Abbot, Dorian S., E-mail: n-cowan@nortwestern.edu [Department of Geophysical Sciences, University of Chicago, 5734 South Ellis Avenue, Chicago, IL 60637 (United States)

2012-09-20

In order to understand the climate on terrestrial planets orbiting nearby Sun-like stars, one would like to know their thermal inertia. We use a global climate model to simulate the thermal phase variations of Earth analogs and test whether these data could distinguish between planets with different heat storage and heat transport characteristics. In particular, we consider a temperate climate with polar ice caps (like the modern Earth) and a snowball state where the oceans are globally covered in ice. We first quantitatively study the periodic radiative forcing from, and climatic response to, rotation, obliquity, and eccentricity. Orbital eccentricity and seasonal changes in albedo cause variations in the global-mean absorbed flux. The responses of the two climates to these global seasons indicate that the temperate planet has 3 Multiplication-Sign the bulk heat capacity of the snowball planet due to the presence of liquid water oceans. The obliquity seasons in the temperate simulation are weaker than one would expect based on thermal inertia alone; this is due to cross-equatorial oceanic and atmospheric energy transport. Thermal inertia and cross-equatorial heat transport have qualitatively different effects on obliquity seasons, insofar as heat transport tends to reduce seasonal amplitude without inducing a phase lag. For an Earth-like planet, however, this effect is masked by the mixing of signals from low thermal inertia regions (sea ice and land) with that from high thermal inertia regions (oceans), which also produces a damped response with small phase lag. We then simulate thermal light curves as they would appear to a high-contrast imaging mission (TPF-I/Darwin). In order of importance to the present simulations, which use modern-Earth orbital parameters, the three drivers of thermal phase variations are (1) obliquity seasons, (2) diurnal cycle, and (3) global seasons. Obliquity seasons are the dominant source of phase variations for most viewing angles. A

The significance of moment-of-inertia variation in flight manoeuvres of butterflies

International Nuclear Information System (INIS)

Lin, T; Zheng, L; Mittal, R; Hedrick, T

2012-01-01

The objective of this study is to understand the role that changes in body moment of inertia might play during flight manoeuvres of insects. High-speed, high-resolution videogrammetry is used to quantify the trajectory and body conformation of Painted Lady butterflies during flight manoeuvres; the 3D kinematics of the centre of masses of the various body parts of the insect is determined experimentally. Measurements of the mass properties of the insect are used to parameterize a simple flight dynamics model of the butterfly. Even though the mass of the flapping wings is small compared to the total mass of the insect, these experiments and subsequent analysis indicate that changes in moment of inertia during flight are large enough to influence the manoeuvres of these insects. (communication)

Analysis of Dynamic Inertia Forces at Main Bearing of Ship Reciprocating Engines

Directory of Open Access Journals (Sweden)

F. Louhenapessy Louhenapessy,

2010-11-01

Full Text Available During operation, a ship reciprocating engine will vibrate due to the force resulting from the cycle movement of the dynamic components. Soon or later, the vibration will cause wear of engine components. Therefore, the cause of vibration should be early identified so that the propagation of wear can be anticipated. The study modeled the ship reciprocating engine as a two stroke engine, and analyzed one of the causes of the engine vibration, i.e. the force acting on main bearing, using a numerical simulation. An experimental study was also carried out for measuring the acceleration of vibration response due to the numerical dynamic inertia force. The results showed that the dynamic inertia force acting on the main bearing is the main cause of the vibration of engine.

Single particle Schroedinger fluid and moments of inertia of deformed nuclei

International Nuclear Information System (INIS)

Doma, S.B.

2002-01-01

The authors have applied the theory of the single-particle Schroedinger fluid to the nuclear collective motion of axially deformed nuclei. A counter example of an arbitrary number of independent nucleons in the anisotropic harmonic oscillator potential at the equilibrium deformation has been also given. Moreover, the ground states of the doubly even nuclei in the s-d shell 20 Ne, 24 Mg, 28 Si, 32 S and 36 Ar are constructed by filling the single-particle states corresponding to the possible values of the number of quanta of excitations n x , n y and n z . Accordingly, the cranking-model, the rigid-body model and the equilibrium-model moments of inertia of these nuclei are calculated as functions of the oscillator parameters ℎω x , ℎω y and ℎω z which are given in terms of the non deformed value ℎω 0 0 , depending on the mass number A, the number of neutrons N, the number of protons Z, and the deformation parameter β. The calculated values of the cranking-model moments of inertia of these nuclei are in good agreement with the corresponding experiential values and show that the considered axially deformed nuclei may have oblate as well as prolate shapes and that the nucleus 24 Mg is the only one which is highly deformed. The rigid-body model and the equilibrium-model moments of inertia of the two nuclei 20 Ne and 24 Mg are also in good agreement with the corresponding experimental values

Visitors’ Experience, Place Attachment and Sustainable Behaviour at Cultural Heritage Sites: A Conceptual Framework

Directory of Open Access Journals (Sweden)

Piera Buonincontri

2017-06-01

Full Text Available Sustainable tourism research has attracted wide interest from scholars and practitioners. While several heritage sites are mandated to provide optimum visitor satisfaction with increasing competition in the market, managers of heritage sites face growing challenges in striking a balance between consumption and conservation. This calls for promoting more sustainable behaviours among consumers of heritage. This study proposes a conceptualization of sustainable behaviour for heritage consumers. Using the attitude–behaviour relationship underpinned by the Theory of Reasoned Action, it develops and proposes a conceptual framework that integrates visitors’ heritage experiences, their attachment to heritage sites, and their general and site-specific sustainable heritage behaviour and presents their interrelationships as proposed hypotheses. Theoretical contributions and practical implications for heritage site managers are discussed.

Dyadic Affective Flexibility and Emotional Inertia in Relation to Youth Psychopathology: An Integrated Model at Two Timescales.

Science.gov (United States)

Mancini, Kathryn J; Luebbe, Aaron M

2016-06-01

The current review examines characteristics of temporal affective functioning at both the individual and dyadic level. Specifically, the review examines the following three research questions: (1) How are dyadic affective flexibility and emotional inertia operationalized, and are they related to youth psychopathology? (2) How are dyadic affective flexibility and emotional inertia related, and does this relation occur at micro- and meso-timescales? and (3) How do these constructs combine to predict clinical outcomes? Using the Flex3 model of socioemotional flexibility as a frame, the current study proposes that dyadic affective flexibility and emotional inertia are bidirectionally related at micro- and meso-timescales, which yields psychopathological symptoms for youth. Specific future directions for examining individual, dyadic, and cultural characteristics that may influence relations between these constructs and psychopathology are also discussed.

Spin alignment and collective moment of inertia of the basic rotational band in the cranking model

International Nuclear Information System (INIS)

Tanaka, Yoshihide

1982-01-01

By making an attempt to separate the intrinsic particle and collective rotational motions in the cranking model, the spin alignment and the collective moment of inertia characterizing the basic rotational bands are defined, and are investigated by using a simple i sub(13/2) shell model. The result of the calculation indicates that the collective moment of inertia decreases under the presence of the quasiparticles which are responsible for the increase of the spin alignment of the band. (author)

A generic inertia emulation controller for multi-terminal VSC-HVDC systems

DEFF Research Database (Denmark)

Zhu, Jiebei; Guerrero, Josep M.; Booth, Campbell

2013-01-01

A generic Inertia Emulation Controller (INEC) for Multi-Terminal Voltage-source-converter based HVDC (VSC-MTDC) is proposed in this paper. The proposed INEC can be incorporated in any grid-side-voltage-source-converter (GVSC) station, allowing the MTDC terminal to contribute an inertial response...

Modeling and Experimental Validation of an Islanded No-Inertia Microgrid Site

DEFF Research Database (Denmark)

Bonfiglio, Andrea; Delfino, Federico; Labella, Alessandro

2018-01-01

The paper proposes a simple but effective model for no-inertia microgrids suitable to represent the instantaneous values of its meaningful electric variables, becoming a useful platform to test innovative control logics and energy management systems. The proposed model is validated against a more...

Back to inertia : Theoretical implications of alternative styles of logical formalization

NARCIS (Netherlands)

Péli, Gabor; Pólos, L.; Hannan, M.T.

This article applies two new criteria, desirability and faithfulness, to evaluate Péli et al.'s (1994) formalization of Hannan and Freeman's structural inertia argument (1984, 1989). We conclude that this formalization fails to meet these criteria. We argue that part of the rational reconstruction

Inertia effects on bubble generation in thin T-junction microchannel

Science.gov (United States)

Sugiyama, Kazuyasu; Okubo, Hidehiko; Nabeshima, Seigo; Watamura, Tomoaki

2016-11-01

A numerical study on gas-liquid interface dynamics of bubble generation in a thin microchannel with a squeezed T-junction is performed. In consideration of liquid inertia, the basic equations consist of the Laplace law and the two-dimensional Euler-Darcy equation under the assumption of Hele-Shaw's flow owing to a large width-to-thickness aspect ratio of the channel cross-section. The velocity potential and the interface motion are numerically predicted by means of a boundary element method. The simulated results reasonably capture the experimentally observed behaviors that the interface pinches off at the channel junction and then a bubble forms. For a fixed liquid velocity, the generated bubble is likely to be smaller with decreasing the gas pressure, but the bubble is no longer generated at the gas pressure below a threshold. The bubble size minimized at the generation limit is arranged using the capillary, Reynolds and Weber numbers, and the results imply the significance of the liquid inertia in the bubble generation process in spite of the micrometer-scale phenomena.

Competing effects of particle and medium inertia on particle diffusion in viscoelastic materials, and their ramifications for passive microrheology.

Science.gov (United States)

Indei, Tsutomu; Schieber, Jay D; Córdoba, Andrés

2012-04-01

We analyze the appropriate form for the generalized Stokes-Einstein relation (GSER) for viscoelastic solids and fluids when bead inertia and medium inertia are taken into account, which we call the inertial GSER. It was previously shown for Maxwell fluids that the Basset (or Boussinesq) force arising from medium inertia can act purely dissipatively at high frequencies, where elasticity of the medium is dominant. In order to elucidate the cause of this counterintuitive result, we consider Brownian motion in a purely elastic solid where ordinary Stokes-type dissipation is not possible. The fluctuation-dissipation theorem requires the presence of a dissipative mechanism for the particle to experience fluctuating Brownian forces in a purely elastic solid. We show that the mechanism for such dissipation arises from the radiation of elastic waves toward the system boundaries. The frictional force associated with this mechanism is the Basset force, and it exists only when medium inertia is taken into consideration in the analysis of such a system. We consider first a one-dimensional harmonic lattice where all terms in the generalized Langevin equation--i.e., the elastic term, the memory kernel, and Brownian forces-can be found analytically from projection-operator methods. We show that the dissipation is purely from radiation of elastic waves. A similar analysis is made on a particle in a continuum, three-dimensional purely elastic solid, where the memory kernel is determined from continuum mechanics. Again, dissipation arises only from radiation of elastic shear waves toward infinite boundaries when medium inertia is taken into account. If the medium is a viscoelastic solid, Stokes-type dissipation is possible in addition to radiational dissipation so that the wave decays at the penetration depth. Inertial motion of the bead couples with the elasticity of the viscoelastic material, resulting in a possible resonant oscillation of the mean-square displacement (MSD) of the

Combined influence of inertia, gravity, and surface tension on the linear stability of Newtonian fiber spinning

Science.gov (United States)

Bechert, M.; Scheid, B.

2017-11-01

The draw resonance effect appears in fiber spinning processes if the ratio of take-up to inlet velocity, the so-called draw ratio, exceeds a critical value and manifests itself in steady oscillations of flow velocity and fiber diameter. We study the effect of surface tension on the draw resonance behavior of Newtonian fiber spinning in the presence of inertia and gravity. Utilizing an alternative scaling makes it possible to visualize the results in stability maps of highly practical relevance. The interplay of the destabilizing effect of surface tension and the stabilizing effects of inertia and gravity lead to nonmonotonic stability behavior and local stability maxima with respect to the dimensionless fluidity and the dimensionless inlet velocity. A region of unconditional instability caused by the influence of surface tension is found in addition to the region of unconditional stability caused by inertia, which was described in previous works [M. Bechert, D. W. Schubert, and B. Scheid, Eur. J. Mech B 52, 68 (2015), 10.1016/j.euromechflu.2015.02.005; Phys. Fluids 28, 024109 (2016), 10.1063/1.4941762]. Due to its importance for a particular group of fiber spinning applications, a viscous-gravity-surface-tension regime, i.e., negligible effect of inertia, is analyzed separately. The mechanism underlying the destabilizing effect of surface tension is discussed and established stability criteria are tested for validity in the presence of surface tension.

The inertia system coordinate transformation based on the Lobachevsky function

International Nuclear Information System (INIS)

Fadeev, N.G.

2001-01-01

Based on the interpretation of the Lobachevsky function cosΠ(ρ/k) = thρ/k as the function which expresses the constant light velocity principle at k = c (k is the Lobachevsky constant, c is the light velocity), the inertia system coordinate transformation of two kinds (one of them known as Lorentz transformation) have been obtained

Sustainable consumer behaviour

OpenAIRE

Antonides, Gerrit

2017-01-01

We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments, eye tracking, scale development, and contingent valuation. The 12 contributions from authors of 13 different countries show the wide and varied application of consumer research focused on sustainabilit...

Acknowledging and allocating responsibility for clinical inertia in the management of Type 2 diabetes in primary care: a qualitative study.

Science.gov (United States)

Zafar, A; Stone, M A; Davies, M J; Khunti, K

2015-03-01

Failure to intensify treatment in patients with Type 2 diabetes with suboptimal blood glucose control has been termed clinical inertia and has been shown to contribute to poorer patient outcomes. We aimed to identify and explore perceptions about clinical inertia from the perspective of primary healthcare providers. A qualitative study was conducted in Leicestershire and Northamptonshire, UK. Purposive sampling was based on healthcare providers working in primary care settings with 'higher' and 'lower' target achievement based on routine data. Twenty semi-structured interviews were conducted, face-to-face or by telephone. Thematic analysis was informed by the constant comparative approach. An important broad theme that emerged during the analysis was related to attribution and explanation of responsibility for clinical inertia. This included general willingness to accept a degree of responsibility for clinical inertia. In some cases, however, participants had inaccurate perceptions about levels of target achievement in their primary care centres, as indicated by routine data. Participants sought to lessen their own sense of accountability by highlighting patient-level barriers such as comorbidities and human fallibility, and also system-level barriers, particularly time constraints. Perceptions about ways of addressing the problem of clinical inertia were not seen as straightforward, further emphasizing a complex and cumulative pattern of barriers. In order to understand and address the problem of clinical inertia, provider, patient- and system-level barriers should be considered together rather than as separate issues. Acknowledgement of responsibility should be regarded positively as a motivator for change. © 2014 The Authors. Diabetic Medicine © 2014 Diabetes UK.

ASTEROSEISMOLOGY OF EVOLVED STARS WITH KEPLER: A NEW WAY TO CONSTRAIN STELLAR INTERIORS USING MODE INERTIAS

Energy Technology Data Exchange (ETDEWEB)

Benomar, O.; Bedding, T. R.; Stello, D. [Sydney Institute for Astronomy (SIfA), School of Physics, University of Sydney, NSW 2006 (Australia); Belkacem, K. [LESIA, Observatoire de Paris, CNRS UMR 8109, Université Paris Diderot, 5 place J. Janssen, F-92195 Meudon (France); Di Mauro, M. P. [INAF-IAPS Istituto di Astrofisica e Planetologia Spaziali, Via del Fosso del Cavaliere 100, I-00133 Roma (Italy); Ventura, R. [INAF-Astrophyscial Observatory of Catania, Via S. Sofia 78, I-95123 Catania (Italy); Mosser, B.; Goupil, M. J.; Samadi, R. [Department of Astronomy, The University of Tokyo, Tokyo 113-0033 (Japan); Garcia, R. A. [Laboratoire AIM, CEA/DSM-CNRS-Université Paris Diderot, IRFU/SAp, Centre de Saclay, F-91191 Gif-sur-Yvette Cedex (France)

2014-02-01

The asteroseismology of evolved solar-like stars is experiencing growing interest due to the wealth of observational data from space-borne instruments such as the CoRoT and Kepler spacecraft. In particular, the recent detection of mixed modes, which probe both the innermost and uppermost layers of stars, paves the way for inferring the internal structure of stars along their evolution through the subgiant and red giant phases. Mixed modes can also place stringent constraints on the physics of such stars and on their global properties (mass, age, etc.). Here, using two Kepler stars (KIC 4351319 and KIC 6442183), we demonstrate that measurements of mixed mode characteristics allow us to estimate the mode inertias, providing a new and additional diagnostics on the mode trapping and subsequently on the internal structure of evolved stars. We however stress that the accuracy may be sensitive to non-adiabatic effects.

Effect of the moment of inertia of an electron shell on the rotational g factor of a molecule

International Nuclear Information System (INIS)

Rebane, T.K.

1988-01-01

It is noted that electron currents induced by the rotation of a molecule make a contribution not only to the magnetic moment, but also to the angular momentum of a molecule and to its moment of inertia. An improved equation for the rotational g factor of a molecule, allowing for the contribution of electrons to the moment of inertia, is given. The B 1 summation + /sub u/ excited electronic state of the hydrogen molecule is used as an example to show that the electronic contribution to the moment of inertia amounts to 0.3 to 0.5% (for H 2 and D 2 molecules, respectively) of the value of the nuclear contribution, and its consideration in calculations of g factors is obligatory

Macroevolution of life-history traits in passerine birds: adaptation and phylogenetic inertia.

Science.gov (United States)

Pienaar, Jason; Ilany, Amiyaal; Geffen, Eli; Yom-Tov, Yoram

2013-05-01

We used a recent passerine phylogeny and comparative method to evaluate the macroevolution of body and egg mass, incubation and fledging periods, time to independence and time with parents of the main passerine lineages. We hypothesised that passerine reproductive traits are affected by adaptation to both past and present environmental factors and phenotypic attributes such as body mass. Our results suggest that the evolution of body and egg mass, time to independence, incubation and fledging times are affected by strong phylogenetic inertia and that these breeding traits are all affected by body mass. Time with parents, where major lineages exhibit their own fixed optima and body mass does not have an effect, and clutch size which is affected by body mass and additionally by climate regimes, do not exhibit any phylogenetic inertia. © 2013 Blackwell Publishing Ltd/CNRS.

Moving the Weber Fraction: The Perceptual Precision for Moment of Inertia Increases with Exploration Force

Science.gov (United States)

Debats, Nienke B.; Kingma, Idsart; Beek, Peter J.; Smeets, Jeroen B. J.

2012-01-01

How does the magnitude of the exploration force influence the precision of haptic perceptual estimates? To address this question, we examined the perceptual precision for moment of inertia (i.e., an object's “angular mass”) under different force conditions, using the Weber fraction to quantify perceptual precision. Participants rotated a rod around a fixed axis and judged its moment of inertia in a two-alternative forced-choice task. We instructed different levels of exploration force, thereby manipulating the magnitude of both the exploration force and the angular acceleration. These are the two signals that are needed by the nervous system to estimate moment of inertia. Importantly, one can assume that the absolute noise on both signals increases with an increase in the signals' magnitudes, while the relative noise (i.e., noise/signal) decreases with an increase in signal magnitude. We examined how the perceptual precision for moment of inertia was affected by this neural noise. In a first experiment we found that a low exploration force caused a higher Weber fraction (22%) than a high exploration force (13%), which suggested that the perceptual precision was constrained by the relative noise. This hypothesis was supported by the result of a second experiment, in which we found that the relationship between exploration force and Weber fraction had a similar shape as the theoretical relationship between signal magnitude and relative noise. The present study thus demonstrated that the amount of force used to explore an object can profoundly influence the precision by which its properties are perceived. PMID:23028437

Toward an interstellar mission: Zeroing in on the zero-point-field inertia resonance

International Nuclear Information System (INIS)

Haisch, Bernhard; Rueda, Alfonso

2000-01-01

While still an admittedly remote possibility, the concept of an interstellar mission has become a legitimate topic for scientific discussion as evidenced by several recent NASA activities and programs. One approach is to extrapolate present-day technologies by orders of magnitude; the other is to find new regimes in physics and to search for possible new laws of physics. Recent work on the zero-point field (ZPF), or electromagnetic quantum vacuum, is promising in regard to the latter, especially concerning the possibility that the inertia of matter may, at least in part, be attributed to interaction between the quarks and electrons in matter and the ZPF. A NASA-funded study (independent of the BPP program) of this concept has been underway since 1996 at the Lockheed Martin Advanced Technology Center in Palo Alto and the California State University at Long Beach. We report on a new development resulting from this effort: that for the specific case of the electron, a resonance for the inertia-generating process at the Compton frequency would simultaneously explain both the inertial mass of the electron and the de Broglie wavelength of a moving electron as first measured by Davisson and Germer in 1927. This line of investigation is leading to very suggestive connections between electrodynamics, inertia, gravitation and the wave nature of matter

Inertia effects in rheometrical flow systems Part 2: The balance rheometer

NARCIS (Netherlands)

Waterman, H.A.

1976-01-01

The flow field of a linear viscoelastic fluid in the balance rheometer, taking fluid inertia into account, has been studied theoretically and an exact solution is given. The flow field of a Newtonian fluid is included in this solution as a special case. The forces and couples on the hemispheres are

Without Place, Is It Real?

Directory of Open Access Journals (Sweden)

Joseph F Donnermeyer

2016-09-01

Full Text Available This article reviews Matthews’ (2014 Realist Criminology as an opportunity to address larger shortcomings within critical criminology, which is the failure to develop an alternative theory of crime and place to the mainstream theories of social disorganisation and collective efficacy. It uses rural criminological work related to violence against women and substance use, production and trafficking to illustrate the importance of place for development of a realist criminology that can consider localised expressions of power and inequality, and the multiplicity of networks and roles by which people can simultaneously be involved in both conforming and deviant/criminal behaviours. The article also suggests that a critical theory of crime and place would be useful to the synthesis and re-interpretation of criminological literature that is either theory-less or lacks a critical perspective.

Inertia effects in the laminar radial flow of a power law fluid with an electromagnetic field

International Nuclear Information System (INIS)

Chen, C.-K.; Chen, K.-H.; Wu, C.-Y.

1984-01-01

An approximate study of the pressure distribution for the radial flow of a non-newtonian (power law) fluid between two parallel disks in the presence of an axial electrical field is obtained by using the momentum and energy integral methods. For a non-newtonian fluid it is shown that the inertia effect must be considered to be significant for the pressure distribution, especially for the power law fluids with n >= 1. Furthermore, it is seen that the inertia effect will also lower the load capacity of the disks. (Auth.)

Time is money: Rational life cycle inertia and the delegation of investment management

Science.gov (United States)

Kim, Hugh Hoikwang; Maurer, Raimond; Mitchell, Olivia S.

2016-01-01

Many households display inertia in investment management over their life cycles. Our calibrated dynamic life cycle portfolio choice model can account for such an apparently ‘irrational’ outcome, by incorporating the fact that investors must forgo acquiring job-specific skills when they spend time managing their money, and their efficiency in financial decision making varies with age. Resulting inertia patterns mesh well with findings from prior studies and our own empirical results from Panel Study of Income Dynamics (PSID) data. We also analyze how people optimally choose between actively managing their assets versus delegating the task to financial advisors. Delegation proves valuable to both the young and the old. Our calibrated model quantifies welfare gains from including investment time and money costs as well as delegation in a life cycle setting. PMID:28344380

High-inertia drive motors and their starting characteristics

International Nuclear Information System (INIS)

Anon.

1980-01-01

The motor for a large reactor coolant pump failed while starting. The motor-application and the motor-failure are discussed in detail. A review of applications of motors for high-inertia drives shows that a motor designed and built to today's industry-standards might be overstressed while experiencing abnormal starting conditions, even though its protection is in accord with accepted practice. The inter-relationship between motor characteristics and characteristics of various types of protection are discussed, briefly. The review concludes that motor specifications and motor standards should be augmented. 1 ref

A dynamic inertia weight particle swarm optimization algorithm

International Nuclear Information System (INIS)

Jiao Bin; Lian Zhigang; Gu Xingsheng

2008-01-01

Particle swarm optimization (PSO) algorithm has been developing rapidly and has been applied widely since it was introduced, as it is easily understood and realized. This paper presents an improved particle swarm optimization algorithm (IPSO) to improve the performance of standard PSO, which uses the dynamic inertia weight that decreases according to iterative generation increasing. It is tested with a set of 6 benchmark functions with 30, 50 and 150 different dimensions and compared with standard PSO. Experimental results indicate that the IPSO improves the search performance on the benchmark functions significantly

Rectal cooling test in the differentiation between constipation due to rectal inertia and anismus.

Science.gov (United States)

Shafik, A; Shafik, I; El Sibai, O; Shafik, A A

2007-03-01

The differentiation between constipation due to rectal inertia and that due to outlet obstruction from non-relaxing puborectalis muscle (PRM) is problematic and not easily achieved with one diagnostic test. Therefore, we studied the hypothesis that the rectal cooling test (RCT) can effectively be used to differentiate between those two forms of constipation. The study enrolled 28 patients with constipation and abnormal transit study in whom radio-opaque markers accumulated in the rectum; 15 healthy volunteers acted as controls. Electromyographic activity of the external anal sphincter (EAS) and PRM was initially recorded. Subsequently rectal wall tone was assessed by a barostat system during rectal infusion with normal saline at 30 degrees C and at 4 degrees C with simultaneous electromyography (EMG). There was a significant increase in EMG activity of the EAS and PRM on strain- ing (panismus, in 10 of 28 patients and 0 of 15 controls. Rectal tone in controls did not respond to saline infusion at 30 degrees C, but it increased at 4 degrees C (panismus (panismus while it had no effect in the remaining patients. Lack of increase of rectal tone may be secondary to rectal inertia. According to these preliminary observations, the rectal cooling test may be useful in differentiating between rectal inertia and anismus.

On the Performance of Linear Decreasing Inertia Weight Particle Swarm Optimization for Global Optimization

Science.gov (United States)

Arasomwan, Martins Akugbe; Adewumi, Aderemi Oluyinka

2013-01-01

Linear decreasing inertia weight (LDIW) strategy was introduced to improve on the performance of the original particle swarm optimization (PSO). However, linear decreasing inertia weight PSO (LDIW-PSO) algorithm is known to have the shortcoming of premature convergence in solving complex (multipeak) optimization problems due to lack of enough momentum for particles to do exploitation as the algorithm approaches its terminal point. Researchers have tried to address this shortcoming by modifying LDIW-PSO or proposing new PSO variants. Some of these variants have been claimed to outperform LDIW-PSO. The major goal of this paper is to experimentally establish the fact that LDIW-PSO is very much efficient if its parameters are properly set. First, an experiment was conducted to acquire a percentage value of the search space limits to compute the particle velocity limits in LDIW-PSO based on commonly used benchmark global optimization problems. Second, using the experimentally obtained values, five well-known benchmark optimization problems were used to show the outstanding performance of LDIW-PSO over some of its competitors which have in the past claimed superiority over it. Two other recent PSO variants with different inertia weight strategies were also compared with LDIW-PSO with the latter outperforming both in the simulation experiments conducted. PMID:24324383

Sulfates on Mars: TES Observations and Thermal Inertia Data

Science.gov (United States)

Cooper, C. D.; Mustard, J. F.

2001-05-01

The high resolution thermal emission spectra returned by the TES spectrometer on the MGS spacecraft have allowed the mapping of a variety of minerals and rock types by different sets of researchers. Recently, we have used a linear deconvolution approach to compare sulfate-palagonite soil mixtures created in the laboratory with Martian surface spectra. This approach showed that a number of areas on Mars have spectral properties that match those of sulfate-cemented soils (but neither loose powder mixtures of sulfates and soils nor sand-sized grains of disaggregated crusted soils). These features do not appear to be caused by atmospheric or instrumental effects and are thus believed to be related to surface composition and texture. The distribution and physical state of sulfate are important pieces of information for interpreting surface processes on Mars. A number of different mechanisms could have deposited sulfate in surface layers. Some of these include evaporation of standing bodies of water, aerosol deposition of volcanic gases, hydrothermal alteration from groundwater, and in situ interaction between the atmosphere and soil. The areas on Mars with cemented sulfate signatures are spread across a wide range of elevations and are generally large in spatial scale. Some of the areas are associated with volcanic regions, but many are in dark red plains that have previously been interpreted as duricrust deposits. Our current work compares the distribution of sulfate-cemented soils as mapped by the spectral deconvolution approach with thermal inertia maps produced from both Viking and MGS-TES. Duricrust regions, interpreted from intermediate thermal inertia values, are large regions thought to be sulfate-cemented soils similar to coherent, sulfate-rich materials seen at the Viking lander sites. Our observations of apparent regions of cemented sulfate are also large in spatial extent. This scale information is important for evaluating formation mechanisms for the

The Pole Orientation, Pole Precession, and Moment of Inertia Factor of Saturn

Science.gov (United States)

Jacobson, R. A.; French, R. G.; Nicholson, P. D.; Hedman, M.; Colwell, J. E.; Marouf, E.; Rappaport, N.; McGhee, C.; Sepersky, T.; Lonergan, K.

2011-01-01

This paper discusses our determination of the Saturn's pole orientation and precession using a combination of Earthbased and spacecraft based observational data. From our model of the polar motion and the observed precession rate we obtain a value for Saturn's polar moment of inertia

Type and Behaviour Reconstruction for Higher-Order Concurrent Programs

DEFF Research Database (Denmark)

Amtoft, T.; Nielson, Flemming; Nielson, Hanne Riis

1997-01-01

The authors develop a sound and complete type and behaviour inference algorithm for a fragment of CML (Standard ML with primitives for concurrency). Behaviours resemble terms of a process algebra and yield a concise representation of the communications taking place during execution; types...... are mostly as usual except that function types and `delayed communication types' are labelled by behaviours expressing the communications that will take place if the function is applied or the delayed action is activated. The development of the paper improves a previously published algorithm in achieving...

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

Science.gov (United States)

Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

2014-05-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin-Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

International Nuclear Information System (INIS)

Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

2014-01-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

Energy Technology Data Exchange (ETDEWEB)

Ghavanloo, Esmaeal, E-mail: ghavanloo@shirazu.ac.ir [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Fazelzadeh, S. Ahmad [School of Mechanical Engineering, Shiraz University, Shiraz 71963-16548 (Iran, Islamic Republic of); Rafii-Tabar, Hashem [Department of Medical Physics and Biomedical Engineering, Research Center for Medical Nanotechnology and Tissue Engineering, Shahid Beheshti University of Medical Sciences, Evin, Tehran (Iran, Islamic Republic of); Computational Physical Sciences Research Laboratory, School of Nano-Science, Institute for Research in Fundamental Sciences (IPM), Tehran (Iran, Islamic Republic of)

2014-05-01

Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

An inverse method for calculation of thermal inertia and heat gain in air conditioning and refrigeration systems

International Nuclear Information System (INIS)

Fayazbakhsh, M.A.; Bagheri, F.; Bahrami, M.

2015-01-01

Highlights: • An inverse method is proposed to calculate thermal inertia in HVAC-R systems. • Real-time thermal loads are estimated using the proposed intelligent algorithm. • Calculation algorithm is validated with on-site measurements. • Freezer duty cycle data are extracted only based on temperature measurements. - Abstract: A new inverse method is proposed for estimation of thermal inertia and heat gain in air conditioning and refrigeration systems using on-site temperature measurements. The method is applied on a walk-in freezer room of a restaurant in Surrey, British Columbia, Canada during one week of its regular operation. The thermal inertia and instantaneous heat gain are calculated and the results are validated using actual information of the materials inside the freezer room. The proposed method can be implemented in intelligent control systems designed for new and existing HVAC-R systems to improve their overall energy efficiency and reduce their environmental impacts

Management and communication courses – Places available

CERN Multimedia

2013-01-01

There are places available in some management and communication courses taking place in the period April to June 2013.   For more information on the course, click on the course title, this will bring you to the training catalogue. You can then sign-up online. For advice, you can contact: - Erwin Mosselmans, tel. 74125, erwin.mosselmans@cern.ch - Nathalie Dumeaux, tel. 78144, nathalie.dumeaux@cern.ch Courses in English (or bilingual) Sessions Duration Language Availability Managing stress 29 and 30 May 2 days English 3 places Making Presentations 30, 31 May & 25 June 3 days English 2 places Communicating Effectively - Residential course 4 to 6 June 3 days Bilingual 9 places Handling difficult conversations (Adapted from Dealing with Conflict) 7 and 14 June and 13 September 3 days English 6 places Voice and Nonverbal Behaviour in Speech Communication 17 and 18 June 1 day 4 hours English 7 plac...

Comparison of Various Dynamic Balancing Principles Regarding Additional Mass and Additional Inertia

NARCIS (Netherlands)

van der Wijk, V.; Demeulenaere, Bram; Herder, Justus Laurens

2009-01-01

The major disadvantage of existing dynamic balancing principles is that a considerable amount of mass and inertia is added to the system. The objectives of this article are to summarize, to compare, and to evaluate existing complete balancing principles regarding the addition of mass and the

Progress in establishing a connection between the electromagnetic zero-point field and inertia

International Nuclear Information System (INIS)

Haisch, Bernhard; Rueda, Alfonso

1999-01-01

We report on the progress of a NASA-funded study being carried out at the Lockheed Martin Advanced Technology Center in Palo Alto and the California State University in Long Beach to investigate the proposed link between the zero-point field of the quantum vacuum and inertia. It is well known that an accelerating observer will experience a bath of radiation resulting from the quantum vacuum which mimics that of a heat bath, the so-called Davies-Unruh effect. We have further analyzed this problem of an accelerated object moving through the vacuum and have shown that the zero-point field will yield a non-zero Poynting vector to an accelerating observer. Scattering of this radiation by the quarks and electrons constituting matter would result in an acceleration-dependent reaction force that would appear to be the origin of inertia of matter (Rueda and Haisch 1998a, 1998b). In the subrelativistic case this inertia reaction force is exactly newtonian and in the relativistic case it exactly reproduces the well known relativistic extension of Newton's Law. This analysis demonstrates then that both the ordinary, F-vector=ma-vector, and the relativistic forms of Newton's equation of motion may be derived from Maxwell's equations as applied to the electromagnetic zero-point field. We expect to be able to extend this analysis in the future to more general versions of the quantum vacuum than just the electromagnetic one discussed herein

Negative optical inertia for enhancing the sensitivity of future gravitational-wave detectors

International Nuclear Information System (INIS)

Khalili, Farid; Danilishin, Stefan; Mueller-Ebhardt, Helge; Miao Haixing; Zhao Chunnong; Chen Yanbei

2011-01-01

We consider enhancing the sensitivity of future gravitational-wave detectors by using double optical spring. When the power, detuning and bandwidth of the two carriers are chosen appropriately, the effect of the double optical spring can be described as a 'negative inertia', which cancels the positive inertia of the test masses and thus increases their response to gravitational waves. This allows us to surpass the free-mass standard quantum limit (SQL) over a broad frequency band, through signal amplification, rather than noise cancellation, which has been the case for all broadband SQL-beating schemes so far considered for gravitational-wave detectors. The merit of such signal amplification schemes lies in the fact that they are less susceptible to optical losses than noise-cancellation schemes. We show that it is feasible to demonstrate such an effect with the Gingin High Optical Power Test Facility, and it can eventually be implemented in future advanced GW detectors.

Sensorless State-Space Control of Elastic Two-Inertia Drive System Using a Minimum State Order Observer

Directory of Open Access Journals (Sweden)

V. Comnac

2009-12-01

Full Text Available The paper presents sensorless state-space control of two-inertia drive system with resilient coupling. The control structure contains an I+PI controller for load speed regulation and a state feedback controller for effective vibration suppression of the elastic coupling. Mechanical state variable of two-inertia drive are obtained by using a linear minimum-order (Gopinath state observer. The design of the combined (I+PI and state feedback controller is achieved with the extended version of the modulus criterion [5]. The dynamic behavior of presented control structure has been examined, for different conditions, using MATLAB/SIMULINK simulation.

Analysis of neoclassical edge plasma transport with gyroviscosity and inertia

International Nuclear Information System (INIS)

Rogister, A.; Antonov, N.

1996-01-01

It is shown that the ambipolarity constraint which results from neoclassical transport theory with gyroviscosity and inertia sets lower limits on the edge density and/or temperature and/or Z eff gradients. Toroidal momentum co, respectively counter, -injection reduces, respectively increases these lower bounds. Generally speaking, co, respectively counter, -injection increases, respectively reduces, the rotation velocities. The theory has so far been developed for the high collisionality regime only. (orig.)

The Perfect Place to Work? Australian Academic Libraries and Unacceptable Behaviour

Science.gov (United States)

Moorcroft, Heather

2009-01-01

Despite the stereotype of libraries as peaceful retreats, unacceptable behaviour is a reality that desk staff have to deal with. This paper outlines the results of two surveys conducted at Charles Darwin University Library to investigate the extent to which this is a problem in Australian academic libraries. The first survey went to CAUL (Council…

Characterizing Center of Mass and Moment of Inertia of Soldiers' Loads Packed for Combat

National Research Council Canada - National Science Library

Hasselquist, Leif; Bensel, Carolyn K; Norton, Karen; Piscitelle, Louis; Schiffman, Jeffrey M

2004-01-01

...) location and moment of inertia (MOI) may be influenced in combat load packing. In addition, the physical properties of the combat loads were compared to the properties of a laboratory fabricated backpack...

Thermal Inertia of near-Earth Asteroids and Strength of the Yarkovsky Effect

NARCIS (Netherlands)

Delbo, Marco; Dell'Oro, A.; Harris, A. W.; Mottola, S.; Mueller, M.

2006-01-01

Thermal inertia is the physical parameter that controls the temperature distribution over the surface of an asteroid. It affects the strength of the Yarkovsky effect, which causes orbital drift of km-sized asteroids and is invoked to explain the delivery of near-Earth asteroids (NEAs) from the main

Empirical model with independent variable moments of inertia for triaxial nuclei applied to 76Ge and 192Os

Science.gov (United States)

Sugawara, M.

2018-05-01

An empirical model with independent variable moments of inertia for triaxial nuclei is devised and applied to 76Ge and 192Os. Three intrinsic moments of inertia, J1, J2, and J3, are varied independently as a particular function of spin I within a revised version of the triaxial rotor model so as to reproduce the energy levels of the ground-state, γ , and (in the case of 192Os) Kπ=4+ bands. The staggering in the γ band is well reproduced in both phase and amplitude. Effective γ values are extracted as a function of spin I from the ratios of the three moments of inertia. The eigenfunctions and the effective γ values are subsequently used to calculate the ratios of B (E 2 ) values associated with these bands. Good agreement between the model calculation and the experimental data is obtained for both 76Ge and 192Os.

Improvement of motor inertia influence of electric power steering; Dendoshiki power steering no motor kansei no eikyo to hosho

Energy Technology Data Exchange (ETDEWEB)

Takehara, S; Sakamoto, K; Hanamoto, Y [Mazda Motor Corp., Hiroshima (Japan); Noritsugu, T [Okayama University, Okayama (Japan)

1997-10-01

Motor inertia of electric power steering affects not only steering characteristics but vehicle dynamics. We have investigated the influence of motor inertia and proposed a feedback strategy to compensate it. Weight of the test vehicle is 1100Kg and the steering system is pinion type electric power steering. By using simulation model and vehicle test, we have realized natural steering maneuvering and stable vehicle dynamics. 4 refs., 11 figs.

Visitors’ Experience, Place Attachment and Sustainable Behaviour at Cultural Heritage Sites: A Conceptual Framework

OpenAIRE

Piera Buonincontri; Alessandra Marasco; Haywantee Ramkissoon

2017-01-01

Sustainable tourism research has attracted wide interest from scholars and practitioners. While several heritage sites are mandated to provide optimum visitor satisfaction with increasing competition in the market, managers of heritage sites face growing challenges in striking a balance between consumption and conservation. This calls for promoting more sustainable behaviours among consumers of heritage. This study proposes a conceptualization of sustainable behaviour for heritage consumers. ...

Applying psychological theories to evidence-based clinical practice: identifying factors predictive of placing preventive fissure sealants.

Science.gov (United States)

Bonetti, Debbie; Johnston, Marie; Clarkson, Jan E; Grimshaw, Jeremy; Pitts, Nigel B; Eccles, Martin; Steen, Nick; Thomas, Ruth; Maclennan, Graeme; Glidewell, Liz; Walker, Anne

2010-04-08

Psychological models are used to understand and predict behaviour in a wide range of settings, but have not been consistently applied to health professional behaviours, and the contribution of differing theories is not clear. This study explored the usefulness of a range of models to predict an evidence-based behaviour -- the placing of fissure sealants. Measures were collected by postal questionnaire from a random sample of general dental practitioners (GDPs) in Scotland. Outcomes were behavioural simulation (scenario decision-making), and behavioural intention. Predictor variables were from the Theory of Planned Behaviour (TPB), Social Cognitive Theory (SCT), Common Sense Self-regulation Model (CS-SRM), Operant Learning Theory (OLT), Implementation Intention (II), Stage Model, and knowledge (a non-theoretical construct). Multiple regression analysis was used to examine the predictive value of each theoretical model individually. Significant constructs from all theories were then entered into a 'cross theory' stepwise regression analysis to investigate their combined predictive value. Behavioural simulation - theory level variance explained was: TPB 31%; SCT 29%; II 7%; OLT 30%. Neither CS-SRM nor stage explained significant variance. In the cross theory analysis, habit (OLT), timeline acute (CS-SRM), and outcome expectancy (SCT) entered the equation, together explaining 38% of the variance. Behavioural intention - theory level variance explained was: TPB 30%; SCT 24%; OLT 58%, CS-SRM 27%. GDPs in the action stage had significantly higher intention to place fissure sealants. In the cross theory analysis, habit (OLT) and attitude (TPB) entered the equation, together explaining 68% of the variance in intention. The study provides evidence that psychological models can be useful in understanding and predicting clinical behaviour. Taking a theory-based approach enables the creation of a replicable methodology for identifying factors that may predict clinical behaviour

Analysis of the cylinder block tilting inertia moment and its effect on the performance of high-speed electro-hydrostatic actuator pumps of aircraft

Directory of Open Access Journals (Sweden)

Junhui ZHANG

2018-01-01

Full Text Available Electro-hydrostatic actuator (EHA pumps are usually characterized as high speed and small displacement. The tilting inertia moment on the cylinder block produced by the inertia forces of piston/slipper assemblies cannot be ignored when analyzing the cylinder block balance. A large tilting inertia moment will make the cylinder block tilt away from the valve plate, resulting in severe wear and significantly increased leakage. This paper presents an analytical expression for the tilting inertia moment on the cylinder block by means of vector analysis. In addition, a high-speed test rig was built up, and experiments on an EHA pump prototype were carried out at high speeds of up to 10,000 r/min. The predicted nature of the cylinder block tilt at high speeds corresponds closely to the witness marks on the dismantled EHA pump prototype. It is suggested that more attention should be given to the tilting inertia moment acting on the cylinder block of an EHA pump since both wear and leakage flow between the cylinder block and the valve plate are very much dependent on this tilting moment.

A 30-Minute, but Not a 10-Minute Nighttime Nap is Associated with Sleep Inertia

Science.gov (United States)

Hilditch, Cassie J.; Centofanti, Stephanie A.; Dorrian, Jillian; Banks, Siobhan

2016-01-01

Study Objectives: To assess sleep inertia following 10-min and 30-min naps during a simulated night shift. Methods: Thirty-one healthy adults (aged 21–35 y; 18 females) participated in a 3-day laboratory study that included one baseline (BL) sleep (22:00–07:00) and one experimental night involving randomization to either: total sleep deprivation (NO-NAP), a 10-min nap (10-NAP) or a 30-min nap (30-NAP). Nap opportunities ended at 04:00. A 3-min psychomotor vigilance task (PVT-B), digit-symbol substitution task (DSST), fatigue scale, sleepiness scale, and self-rated performance scale were undertaken pre-nap (03:00) and at 2, 17, 32, and 47 min post-nap. Results: The 30-NAP (14.7 ± 5.7 min) had more slow wave sleep than the 10-NAP (0.8 ± 1.5 min; P inertia and helped to mitigate short-term performance impairment during a simulated night shift. Self-rated performance did not reflect objective performance following a nap. Citation: Hilditch CJ, Centofanti SA, Dorrian J, Banks S. A 30-minute, but not a 10-minute nighttime nap is associated with sleep inertia. SLEEP 2016;39(3):675–685. PMID:26715234

Clinical inertia in poorly controlled elderly hypertensive patients: a cross-sectional study in Spanish physicians to ascertain reasons for not intensifying treatment.

Science.gov (United States)

Gil-Guillén, Vicente; Orozco-Beltrán, Domingo; Carratalá-Munuera, Concepción; Márquez-Contreras, Emilio; Durazo-Arvizu, Ramón; Cooper, Richard; Pertusa-Martínez, Salvador; Pita-Fernandez, Salvador; González-Segura, Diego; Martin-de-Pablo, José Luis; Pallarés, Vicente; Fernández, Antonio; Redón, Josep

2013-06-01

Clinical inertia, the failure of physicians to initiate or intensify therapy when indicated, is a major problem in the management of hypertension and may be more prevalent in elderly patients. Overcoming clinical inertia requires understanding its causes and evaluating certain factors, particularly those related to physicians. The objective of our study was to determine the rate of clinical inertia and the physician-reported reasons for it. An observational, cross-sectional, multi-center study was carried out in a primary care setting. We included 512 physicians, with a consecutive sampling of 1,499 hypertensive patients with clinical inertia. Clinical inertia was defined when physicians did not modify treatment despite knowing that the therapeutic target had not been reached. Clinical inertia was considered to be justified (JCI) when physicians provided an explanation for not intensifying treatment and as not justified (nJCI) when no reasons were given. JCI was observed in 30.1 % (95 % CI 27.8-32.4) of patients (n = 451) and nJCI in 69.9 % (95 % CI 67.6-72.2) (n = 1,058). JCI was associated with higher blood pressure (BP) values (both systolic and diastolic) and diabetes (p = 0.012) than nJCI. nJCI was associated with patients having an isolated increase of systolic or diastolic or high borderline BP values or cardiovascular disease. Physicians provided reasons for not intensifying treatment in poorly controlled patients in only 30 % of instances. Main reasons for not intensifying treatment were borderline BP values, co-morbidity, suspected white coat effect, or perceived difficulty achieving target. nJCI was associated with high borderline BP values and cardiovascular disease.

Effect of particle inertia and gravity on the turbulence in a suspension

NARCIS (Netherlands)

Ooms, G.; Poesio, P.

2005-01-01

A theoretical model is presented for the effect of particle inertia and gravity on the turbulence in a homogeneous suspension. It is an extension of the one-fluid model developed by L’vov, Ooms, and Pomyalov [Phys. Rev. E 67, 046314 (2003)] , in which the effect of gravity was not considered. In the

The neutron–proton pairing and the moments of inertia of the rare ...

Indian Academy of Sciences (India)

In this study, the possible effect of the neutron–proton pairing interaction in the heavy nuclei has been investigated in the framework of the BCS model by making a simple approximation. This effect has been searched realistically by calculating the moments of inertia of deformed even–even nuclei. Calculations show that the ...

Systematically too low values of the cranking model collective inertia parameters

International Nuclear Information System (INIS)

Dudek, I.; Dudek, W.; Lukasiak-Ruchowska, E.; Skalski, I.

1980-01-01

Deformed Nilsson and Woods-Saxon potentials were employed for generating single particle states used henceforth for calculating the inertia tensor (cranking model and monopole pairing) and the collective energy surfaces (Strutinsky method). The deformation was parametrized in terms of quadrupole and hexadecapole degrees of freedom. The classical energy expression obtained from the inertia tensor and energy surfaces was quantized and the resulting stationary Schroedinger equation was solved using the approximate method. The second Isup(π) = 0 + 2 collective level energies were calculated for the Rare Earth and Actinide nuclei and the results compared with the experimental data. The vibrational level energies agree with the experimental ones much better for spherical nuclei for both single particle potentials; the discrepancies for deformed nuclei overestimate the experimental results by roughly a factor of two. It is argued that coupling of the axially symmetric quadrupole degrees of freedom to non-axial and hexadecapole ones does not affect the conclusions about systematically too low mass parameter values. The alternative explanation of the systematic deviations from the 0 + 2 level energies could be a systematically too high stiffness of the energy surfaces obrained with the Strutinsky method. (orig.)

Constraints on the Moment of Inertia of a Proto Neutron Star from the ...

Indian Academy of Sciences (India)

0} system. It is found that for a proto neu- tron star, the mass, the moment of inertia and their own maximum values as a function of .... Our previous work shows that such hyperon coupling constants can give the neutron star matter a better ...

Christoffel symbols and inertia in flat space-time theory. [Curvilinear coordinate systems

Energy Technology Data Exchange (ETDEWEB)

Krause, J [Universidad Central de Venezuela, Caracas

1976-11-01

A necessary and sufficient criterion of inertia is presented, for the flat space-time theory of general frames of reference, in terms of the vanishing of some typical components of the affine connection pertaining to curvilinear coordinate systems. The physical identification of inertial forces thus arises in the context of the special theory of relativity.

On the morphological instability of a bubble during inertia-controlled growth

Science.gov (United States)

Martyushev, L. M.; Birzina, A. I.; Soboleva, A. S.

2018-06-01

The morphological stability of a spherical bubble growing under inertia control is analyzed. Based on the comparison of entropy productions for a distorted and undistorted surface and using the maximum entropy production principle, the morphological instability of the bubble under arbitrary amplitude distortions is shown. This result allows explaining a number of experiments where the surface roughness of bubbles was observed during their explosive-type growth.

Cellular automata with inertia: species competition, spatial patterns, and survival in ecotones

International Nuclear Information System (INIS)

Kramer, K; Koehler, M; Luz, M G E da

2010-01-01

We consider a two-dimensional CA model with three possible states for the system individual cells, 0 and ±. As for the dynamical rules, only ± can exert pressure to change the cells actual states. In this way, the 0 state is neutral and in some sense competitively weaker than the other two states. We further assume an inner property, the inertia, which is an intrinsic resistance to changes in the system. We evolve an ensemble of initial configurations for the CA until reaching steady states. By calculating averages over some relevant quantities for the final stationary configurations, we discuss how certain features of the problem, namely, initial states population and degree of aggregation as well as the values of inertia, can determine the different characteristics of the spatio-temporal pattern created by the CA evolution. We finally discuss how our findings may be relevant in the understanding of structures formation due to species competition in biology, specially in the transition regions between different biomes, the so called ecotones.

Helping 'light green' consumers walk the talk. Results of a behavioural intervention survey in the Swiss electricity market

International Nuclear Information System (INIS)

Litvine, Dorian; Wuestenhagen, Rolf

2011-01-01

While many consumer surveys show very positive attitudes towards renewable energy, the share of consumers actually purchasing green electricity is still in the single-digit percent range in most countries. What can be done to help consumers with positive attitudes towards green electricity to 'walk the talk', i.e. to behave consistently with their preferences? We developed a psychological model based on the theory of planned behaviour (TPB) to design a large-scale behavioural intervention survey with 1163 Swiss electricity consumers. Our results show that by providing information targeted at the key factors influencing the intention to purchase green electricity, namely attitudes towards purchase, social norms and perceived behavioural control, a significant increase in green electricity market share can be achieved. Our results show that price is not the only barrier to purchasing green electricity, and that information to increase the perceived benefit of buying green electricity as well as targeted communication to overcome inertia among retail electricity consumers are equally important factors. (author)

Force Outputs during Squats Performed Using a Rotational Inertia Device under Stable versus Unstable Conditions with Different Loads.

Science.gov (United States)

Vázquez-Guerrero, Jairo; Moras, Gerard; Baeza, Jennifer; Rodríguez-Jiménez, Sergio

2016-01-01

The purpose of the study was to compare the force outputs achieved during a squat exercise using a rotational inertia device in stable versus unstable conditions with different loads and in concentric and eccentric phases. Thirteen male athletes (mean ± SD: age 23.7 ± 3.0 years, height 1.80 ± 0.08 m, body mass 77.4 ± 7.9 kg) were assessed while squatting, performing one set of three repetitions with four different loads under stable and unstable conditions at maximum concentric effort. Overall, there were no significant differences between the stable and unstable conditions at each of the loads for any of the dependent variables. Mean force showed significant differences between some of the loads in stable and unstable conditions (P inertia device allowed the generation of similar force outputs under stable and unstable conditions at each of the four loads. The study also provides empirical evidence of the different force outputs achieved by adjusting load conditions on the rotational inertia device when performing squats, especially in the case of peak force. Concentric force outputs were significantly higher than eccentric outputs, except for peak force under both conditions. These findings support the use of the rotational inertia device to train the squatting exercise under unstable conditions for strength and conditioning trainers. The device could also be included in injury prevention programs for muscle lesions and ankle and knee joint injuries.

Selecting boundary conditions in physiological strain analysis of the femur: Balanced loads, inertia relief method and follower load.

Science.gov (United States)

Heyland, Mark; Trepczynski, Adam; Duda, Georg N; Zehn, Manfred; Schaser, Klaus-Dieter; Märdian, Sven

2015-12-01

Selection of boundary constraints may influence amount and distribution of loads. The purpose of this study is to analyze the potential of inertia relief and follower load to maintain the effects of musculoskeletal loads even under large deflections in patient specific finite element models of intact or fractured bone compared to empiric boundary constraints which have been shown to lead to physiological displacements and surface strains. The goal is to elucidate the use of boundary conditions in strain analyses of bones. Finite element models of the intact femur and a model of clinically relevant fracture stabilization by locking plate fixation were analyzed with normal walking loading conditions for different boundary conditions, specifically re-balanced loading, inertia relief and follower load. Peak principal cortex surface strains for different boundary conditions are consistent (maximum deviation 13.7%) except for inertia relief without force balancing (maximum deviation 108.4%). Influence of follower load on displacements increases with higher deflection in fracture model (from 3% to 7% for force balanced model). For load balanced models, follower load had only minor influence, though the effect increases strongly with higher deflection. Conventional constraints of fixed nodes in space should be carefully reconsidered because their type and position are challenging to justify and for their potential to introduce relevant non-physiological reaction forces. Inertia relief provides an alternative method which yields physiological strain results. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

The Early Lunar Orbit and Principal Moments of Inertia

Science.gov (United States)

Garrick-Bethell, I.; Zuber, M. T.

2007-12-01

If taken at face value, the principal lunar moments of inertia suggest that the Moon froze in a past tidal and rotational state during a high eccentricity orbit [1]. At this time the Moon may have been in either synchronous rotation or in a 3:2 resonance of spin and mean motion. We have performed further investigations of the plausibility of past high eccentricity lunar orbits on the basis of orbital evolution, the dynamics of entry into any past 3:2 resonance, and tidal dissipation. We have found that the requisite permanent (B-A)/C (where A, B, and C are the principal moments of inertia) for a 3:2 resonance can be achieved in a magma ocean if a density anomaly is present shortly after lunar accretion. In a high eccentricity orbit, tidal dissipation will affect the Moon's ability to develop lithospheric strength. The Moon is presently able to support degree-two loads, while Io, which is approximately the same size as the Moon and strongly heated by tidal dissipation, probably cannot [2]. Therefore, somewhere between the present lunar radioactive heating rate (~1012 W), and Io's observed dissipation (~1014 W), the Moon may develop lithospheric strength. We use 1014 W as a loose upper bound on where freeze-in may begin and find that in a 3:2 resonance tidal dissipation [3] can drop below 1014 W at a = 25 RE and e = 0.17, and the present moments of inertia can be approximately reproduced for lunar values of QM = 475 (where a is the lunar semimajor axis, RE is the Earth radius, and Q is the specific dissipation function). This value of QM is somewhat large, but the biggest problem with a 3:2 resonance that lasts until 25 RE is how to achieve the current low eccentricity synchronous orbit. The required damping cannot be easily achieved unless the Moon is knocked out of a 3:2 resonance by an impactor that would produce a crater approximately 800 km in diameter. In sum, there is no single strong constraint that completely rules out a 3:2 resonance, but it would require a

Metallurgical joining of engine parts. Inertia welding of nickel superalloy HP compressor disks

International Nuclear Information System (INIS)

Ferte, J.P.

1993-01-01

The main part of this paper describes upside metallurgical and mechanical work done at SNECMA, on inertia welding of powder metallurgy nickel base superalloys ASTROLOY and N18, allowing appliance of this process to engine parts : Inertia welding of superalloys leads to deap microstructural changes in the H.A.Z. which have been, as well as upset, correlated to process parameters, weld geometry and base material microstructure; a full mechanical testing of welds shown properties equivalent to base material ones up to 650 C except for fatigue crack growth behavior under specific conditions (T>600 C-hold time at maximum load) which is drastically reduced for in weld plane propagation. A significant improvement of this later property has been done through post-welding heat treatment and optimization of welding parameters. Last part of this paper summarize the main teachings gained, on the complete welding procedure, from welding of scale one parts. (orig.)

Increasing viscosity and inertia using a robotically-controlled pen improves handwriting in children

Science.gov (United States)

Ben-Pazi, Hilla; Ishihara, Abraham; Kukke, Sahana; Sanger, Terence D

2010-01-01

The aim of this study was to determine the effect of mechanical properties of the pen on the quality of handwriting in children. Twenty two school aged children, ages 8–14 years wrote in cursive using a pen attached to a robot. The robot was programmed to increase the effective weight (inertia) and stiffness (viscosity) of the pen. Speed, frequency, variability, and quality of the two handwriting samples were compared. Increased inertia and viscosity improved handwriting quality in 85% of children (pHandwriting quality did not correlate with changes in speed, suggesting that improvement was not due to reduced speed. Measures of movement variability remained unchanged, suggesting that improvement was not due to mechanical smoothing of pen movement by the robot. Since improvement was not explained by reduced speed or mechanical smoothing, we conclude that children alter handwriting movements in response to pen mechanics. Altered movement could be caused by changes in proprioceptive sensory feedback. PMID:19794098

A model measuring therapeutic inertia and the associated factors among diabetes patients: A nationwide population-based study in Taiwan.

Science.gov (United States)

Huang, Li-Ying; Shau, Wen-Yi; Yeh, Hseng-Long; Chen, Tsung-Tai; Hsieh, Jun Yi; Su, Syi; Lai, Mei-Shu

2015-01-01

This article presents an analysis conducted on the patterns related to therapeutic inertia with the aim of uncovering how variables at the patient level and the healthcare provider level influence the intensification of therapy when it is clinically indicated. A cohort study was conducted on 899,135 HbA1c results from 168,876 adult diabetes patients with poorly controlled HbA1c levels. HbA1c results were used to identify variations in the prescription of hypoglycemic drugs. Logistic regression and hierarchical linear models (HLMs) were used to determine how differences among healthcare providers and patient characteristics influence therapeutic inertia. We estimated that 38.5% of the patients in this study were subject to therapeutic inertia. The odds ratio of cardiologists choosing to intensify therapy was 0.708 times that of endocrinologists. Furthermore, patients in medical centers were shown to be 1.077 times more likely to be prescribed intensified treatment than patients in primary clinics. The HLMs presented results similar to those of the logistic model. Overall, we determined that 88.92% of the variation in the application of intensified treatment was at the within-physician level. Reducing therapeutic inertia will likely require educational initiatives aimed at ensuring adherence to clinical practice guidelines in the care of diabetes patients. © 2014, The American College of Clinical Pharmacology.

Differences in Symptom Severity and Quality of Life in Patients With Obstructive Defecation and Colonic Inertia.

Science.gov (United States)

Chou, Adriana B; Cohan, Jessica N; Varma, Madhulika G

2015-10-01

Little is known about how obstructive defecation and colonic inertia symptoms contribute to constipation-related quality of life. We sought to characterize the differences in quality of life in patients with severe obstructive defecation and colonic inertia symptoms. This study was a cross-sectional analysis of a prospective database. Patients were enrolled at a single tertiary referral center. We included consecutive adults with severe symptoms of obstructive defecation (n = 115) or colonic inertia (n = 90) as measured by the Constipation Severity Instrument. The primary outcomes measured were the Pelvic Floor Distress Inventory, Constipation-Related Quality of Life instrument, Pelvic Floor Impact Questionnaire, and 12-item Short Form Health Survey. Although physical examination and anorectal physiology testing were similar between groups, patients with severe obstructive defecation symptoms reported worse pain, distress, and constipation-specific quality of life than patients with severe colonic inertia symptoms (all p < 0.001). Specifically, patients with severe obstructive defecation symptoms showed greater quality-of-life impairment related to eating, bathroom habits, and social functioning (all p ≤ 0.01). Furthermore, patients with severe obstructive defecation symptoms had inferior global quality of life on the 12-item Short Form Health Survey physical component score (p = 0.03) and mental component score (p = 0.06). The use of patient self-report instruments resulted in a proportion of patients with incomplete data. Quality of life was impaired in both groups of patients; however, patients with severe obstructive defecation symptoms were affected to a significantly greater extent. The fact that there were no differences in objective findings on physical examination or anorectal physiology studies highlights the importance of assessing quality of life during the evaluation and treatment of constipated patients.

Accounting for the inertia of the thermocouples' measurements by modelling of a NPP Kalinin-3 transient with the coupled system code ATHLET-BIPR-VVER

International Nuclear Information System (INIS)

Nikonov, S.; Velkov, K.

2008-01-01

The ATHLET-BIPR-VVER coupled system code is applied for performing of safety analysis for different WWER reactors. During the last years its validation matrix is continuously being enlarged. The measurements performed during the commissioning phase of NPP Kalinin Unit 3 for the transient 'Switching-off of one Main Circulation Pump at nominal power' are very well documented and have a variety of recorded integral and local thermo-hydraulic and neutron-physic parameters including the measurements' errors. This data is being used for further validation of the coupled code system ATHLET-BIPR-VVER. In the paper are discussed the problems and our solutions by the correct interpretation of the measured thermocouples' records at NPP Kalinin-3 and the comparison with the predicted results by the coupled thermal-hydraulic/neutron-kinetic code ATHLET-BIPR-VVER. Of primary importance by such comparisons is the correct accounting of the fluid mixing process that take place in the surrounding of the measuring sensors and also the consideration of the time delay (inertia term) of the measuring devices. On the bases of previous experience and many simulations of the defined transient a method is discussed and proposed to consider correctly the inertia term of the thermocouples' measurements. The new modelling is implemented in the coupled system code ATHLET-BIPR-VVER for further validation. (Author)

Applying psychological theories to evidence-based clinical practice: identifying factors predictive of placing preventive fissure sealants

Directory of Open Access Journals (Sweden)

Maclennan Graeme

2010-04-01

Full Text Available Abstract Background Psychological models are used to understand and predict behaviour in a wide range of settings, but have not been consistently applied to health professional behaviours, and the contribution of differing theories is not clear. This study explored the usefulness of a range of models to predict an evidence-based behaviour -- the placing of fissure sealants. Methods Measures were collected by postal questionnaire from a random sample of general dental practitioners (GDPs in Scotland. Outcomes were behavioural simulation (scenario decision-making, and behavioural intention. Predictor variables were from the Theory of Planned Behaviour (TPB, Social Cognitive Theory (SCT, Common Sense Self-regulation Model (CS-SRM, Operant Learning Theory (OLT, Implementation Intention (II, Stage Model, and knowledge (a non-theoretical construct. Multiple regression analysis was used to examine the predictive value of each theoretical model individually. Significant constructs from all theories were then entered into a 'cross theory' stepwise regression analysis to investigate their combined predictive value Results Behavioural simulation - theory level variance explained was: TPB 31%; SCT 29%; II 7%; OLT 30%. Neither CS-SRM nor stage explained significant variance. In the cross theory analysis, habit (OLT, timeline acute (CS-SRM, and outcome expectancy (SCT entered the equation, together explaining 38% of the variance. Behavioural intention - theory level variance explained was: TPB 30%; SCT 24%; OLT 58%, CS-SRM 27%. GDPs in the action stage had significantly higher intention to place fissure sealants. In the cross theory analysis, habit (OLT and attitude (TPB entered the equation, together explaining 68% of the variance in intention. Summary The study provides evidence that psychological models can be useful in understanding and predicting clinical behaviour. Taking a theory-based approach enables the creation of a replicable methodology for

Job Satisfaction and Job Performance at the Work Place

OpenAIRE

Vanden Berghe, Jae Hyung

2011-01-01

The topic of the thesis is job satisfaction and job performance at the work place. The aim is to define the determinants for job satisfaction and to investigate the relationship between job satisfaction and job performance and the influence of job satisfaction on job performance. First we look into the Theory of Reasoned Action and the Theory of Planned Behaviour to account for the relationship between attitudes and behaviour. Job satisfaction is then explained as a function of job feature...

MPC for Wind Power Gradients - Utilizing Forecasts, Rotor Inertia, and Central Energy Storage

DEFF Research Database (Denmark)

Hovgaard, Tobias Gybel; Larsen, Lars F. S.; Jørgensen, John Bagterp

2013-01-01

decentralized energy storage in the turbines’ inertia combined with a central storage unit or deferrable consumers can be utilized to achieve this goal at a minimum cost. We propose a variation on model predictive control to incorporate predictions of wind speed. Due to the aerodynamics of the turbines...

Solution of the spherically symmetric linear thermoviscoelastic problem in the inertia-free limit

DEFF Research Database (Denmark)

Christensen, Tage Emil; Dyre, J. C.

2008-01-01

paper-the thermoviscoelastic  problem may be solved analytically in the inertia-free limit, i.e., the limit where the sample is much smaller than the wavelength of sound waves at the frequencies of interest. As for the one-dimensional thermoviscoelastic problem [Christensen et al., Phys. Rev. E 75...

AUTONOMOUS HEAT SUPPLY SYSTEM OF CONSUMERS WITH CONSIDERABLE DIFFERENT THERMAL INERTIA

Directory of Open Access Journals (Sweden)

Berzan V.P.

2012-04-01

Full Text Available There are examined problems occurring at the adoption of the decentralized heat energy supply system of the group of objects, which contains buildings with thermal inertia differed in thousands of times one from the other. It is studied the influence of water volume of hot-water boiler on greenhouse dynamics. It is conducted the comparison between the use ob biomass and natural gas boilers for such as objects.

Creep to inertia dominated stick-slip behavior in sliding friction modulated by tilted non-uniform loading

Science.gov (United States)

Tian, Pengyi; Tao, Dashuai; Yin, Wei; Zhang, Xiangjun; Meng, Yonggang; Tian, Yu

2016-09-01

Comprehension of stick-slip motion is very important for understanding tribological principles. The transition from creep-dominated to inertia-dominated stick-slip as the increase of sliding velocity has been described by researchers. However, the associated micro-contact behavior during this transition has not been fully disclosed yet. In this study, we investigated the stick-slip behaviors of two polymethyl methacrylate blocks actively modulated from the creep-dominated to inertia-dominated dynamics through a non-uniform loading along the interface by slightly tilting the angle of the two blocks. Increasing the tilt angle increases the critical transition velocity from creep-dominated to inertia-dominated stick-slip behaviors. Results from finite element simulation disclosed that a positive tilt angle led to a higher normal stress and a higher temperature on blocks at the opposite side of the crack initiating edge, which enhanced the creep of asperities during sliding friction. Acoustic emission (AE) during the stick-slip has also been measured, which is closely related to the different rupture modes regulated by the distribution of the ratio of shear to normal stress along the sliding interface. This study provided a more comprehensive understanding of the effect of tilted non-uniform loading on the local stress ratio, the local temperature, and the stick-slip behaviors.

The Everyday Emotional Experience of Adults with Major Depressive Disorder: Examining Emotional Instability, Inertia, and Reactivity

Science.gov (United States)

Thompson, Renee J.; Mata, Jutta; Jaeggi, Susanne M.; Buschkuehl, Martin; Jonides, John; Gotlib, Ian H.

2013-01-01

Investigators have begun to examine the temporal dynamics of affect in individuals diagnosed with Major Depressive Disorder (MDD), focusing on instability, inertia, and reactivity of emotion. How these dynamics differ between individuals with MDD and healthy controls have not before been examined in a single study. In the present study, 53 adults with MDD and 53 healthy adults carried hand-held electronic devices for approximately seven days and were prompted randomly eight times per day to report their levels of current negative affect (NA), positive affect (PA), and the occurrence of significant events. In terms of NA, compared with healthy controls, depressed participants reported greater instability and greater reactivity to positive events, but comparable levels of inertia and reactivity to negative events. Neither average levels of NA nor NA reactivity to, frequency or intensity of, events accounted for the group difference in instability of NA. In terms of PA, the MDD and control groups did not differ significantly in their instability, inertia, or reactivity to positive or negative events. These findings highlight the importance of emotional instability in MDD, particularly with respect to NA, and contribute to a more nuanced understanding of the everyday emotional experiences of depressed individuals. PMID:22708886

An object oriented implementation of the Yeadon human inertia model.

Science.gov (United States)

Dembia, Christopher; Moore, Jason K; Hubbard, Mont

2014-01-01

We present an open source software implementation of a popular mathematical method developed by M.R. Yeadon for calculating the body and segment inertia parameters of a human body. The software is written in a high level open source language and provides three interfaces for manipulating the data and the model: a Python API, a command-line user interface, and a graphical user interface. Thus the software can fit into various data processing pipelines and requires only simple geometrical measures as input.

[A specific questionnaire to evaluate therapeutic inertia in hypertensive patients: a pilot study].

Science.gov (United States)

Pretorean, T; Claisse, G; Delsart, P; Caudrelier, T; Devos, P; Mounier-Vehier, C

2014-02-01

Therapeutic inertia (TI) is a recent concept still unknown by many physicians. In chronic diseases such as hypertension, it is defined as the tendency of physicians not to increase or change antihypertensive medications when the target blood pressure is not reached. Acting on TI could improve blood pressure control in France. This was a single-center prospective pilot study conducted by hypertension specialist physicians at the University Cardio-Vascular Center in Lille (France). It was conducted between March and June 2011. Data was collected from 161 hypertensive patients (mean age: 61.64±11.18 years; 98 (60.9%) male; 75 secondary prevention patients). Each physician completed a questionnaire on therapeutic inertia. TI was defined as a consultation in which treatment change was indicated (systolic blood pressure [BP]≥140 and/or diastolic BP≥90mmHg in all patients), but did not occur, with absence of an adapted justification of this choice. We considered as an adapted justification: a white coat effect demonstrated by ambulatory blood pressure monitoring (ABPM) or home blood pressure monitoring; scheduled reassessment of the BP by ABPM; recent change in antihypertensive treatment (less than 4 weeks); hospitalization needed for complete evaluation of secondary causes of hypertension and a more detailed assessment of potential target organ damage in patients with grade 1 or 2 hypertension. Our study aimed to evaluate rates of TI, to identify factors associated with TI, and to test the TI questionnaire. Therapeutic inertia as defined in this study occurred in 11 consultations (8.3%) of the 133 hypertensive patients having uncontrolled BP above or equal to 140 and/or 90mmHg. Significant factors associated with TI were older age (Z=2.35, PP>0.05) and the number of consultations (Z=1.92, 0.1>P>0.05) exhibited a significant trend to be associated with TI. Although the rate of TI was low in our study conducted in a specialized center, a well-accepted definition of

Empowering parents to understand and manage children's behaviour.

Science.gov (United States)

Boot, Ann

2010-01-01

While there are many projects successfully targeting the problems associated with the management of unwanted behaviour in children, this article suggests that all parents would benefit from a greater understanding of how to manage such behaviour. Health visitors and their teams are well placed to help parents to understand what is normal behaviour for different ages and developmental stages and empower them to find solutions for unwanted behaviours. However, current financial constraints which allow health visitors to focus only on specific groups mean that they are not able to provide this help as a universal service. Teaching parents to observe their child and record their findings, an approach used by a health visitor-led programme in Wales, provides an opportunity for significant learning to take place. Through such programmes, parents acquire skills that boost their self-esteem and confidence, which in turn empower them to be proactive in the promotion of their family's health and well-being.

Multiple-stage decisions in a marine central-place forager.

Science.gov (United States)

Friedlaender, Ari S; Johnston, David W; Tyson, Reny B; Kaltenberg, Amanda; Goldbogen, Jeremy A; Stimpert, Alison K; Curtice, Corrie; Hazen, Elliott L; Halpin, Patrick N; Read, Andrew J; Nowacek, Douglas P

2016-05-01

Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager

Multiple-stage decisions in a marine central-place forager

Science.gov (United States)

Friedlaender, Ari S.; Johnston, David W.; Tyson, Reny B.; Kaltenberg, Amanda; Goldbogen, Jeremy A.; Stimpert, Alison K.; Curtice, Corrie; Hazen, Elliott L.; Halpin, Patrick N.; Read, Andrew J.; Nowacek, Douglas P.

2016-05-01

Air-breathing marine animals face a complex set of physical challenges associated with diving that affect the decisions of how to optimize feeding. Baleen whales (Mysticeti) have evolved bulk-filter feeding mechanisms to efficiently feed on dense prey patches. Baleen whales are central place foragers where oxygen at the surface represents the central place and depth acts as the distance to prey. Although hypothesized that baleen whales will target the densest prey patches anywhere in the water column, how depth and density interact to influence foraging behaviour is poorly understood. We used multi-sensor archival tags and active acoustics to quantify Antarctic humpback whale foraging behaviour relative to prey. Our analyses reveal multi-stage foraging decisions driven by both krill depth and density. During daylight hours when whales did not feed, krill were found in deep high-density patches. As krill migrated vertically into larger and less dense patches near the surface, whales began to forage. During foraging bouts, we found that feeding rates (number of feeding lunges per hour) were greatest when prey was shallowest, and feeding rates decreased with increasing dive depth. This strategy is consistent with previous models of how air-breathing diving animals optimize foraging efficiency. Thus, humpback whales forage mainly when prey is more broadly distributed and shallower, presumably to minimize diving and searching costs and to increase feeding rates overall and thus foraging efficiency. Using direct measurements of feeding behaviour from animal-borne tags and prey availability from echosounders, our study demonstrates a multi-stage foraging process in a central place forager that we suggest acts to optimize overall efficiency by maximizing net energy gain over time. These data reveal a previously unrecognized level of complexity in predator-prey interactions and underscores the need to simultaneously measure prey distribution in marine central place forager

Frequency, clinical correlates and rating of behavioural changes in primary brain tumour patients: A preliminary investigation.

Directory of Open Access Journals (Sweden)

Grahame K Simpson

2015-04-01

Full Text Available PurposeFew studies have addressed the specific behavioural changes associated with primary brain tumour (PBT. This paper will report on the frequency and demographic/clinical correlates of such behaviours, and the reliability of rating such behaviours amongst people with PBT, family informants and clinicians. The association of behavioural changes and patient functional status will also be discussed.MethodsA total of 57 patients with 37 family informants were recruited from two large Australian metropolitan hospitals. Each completed three neuro-behavioural self-report measures. Patients also completed a depression symptom measure. Functional status was defined by clinician-rated Karnofsky Performance Status.ResultsPatients were on average 52 years old, a median of four months (range 1-82 post-diagnosis, with high grade (39%, low grade (22% or benign tumours (39%. Patients reported frequency rates of 7-40% across various behavioural domains including anger, inappropriate behaviour, apathy, inertia and executive impairment. The presence of epileptic seizures was associated with significantly higher levels of behavioural changes. Notably, behaviour did not correlate with tumour grade or treatment modality. There was moderate agreement between patients and relatives on the presence or absence of behavioural changes, and substantial agreement between relative and clinician ratings. Depressed patients did not generally report more changes than non-depressed patients. Increases in the relative and clinician-rated behaviour scores were significantly correlated with decreasing functional status in the patient.ConclusionsBehavioural changes were a common sequela of both benign and malignant PBT. Larger scale studies are required to confirm these results. The results suggest the importance of including behaviour in brain cancer psychosocial assessments and the need to develop interventions to treat these patients and reduce the burden of care on families.

Role of the Soil Thermal Inertia in the short term variability of the surface temperature and consequences for the soil-moisture temperature feedback

Science.gov (United States)

Cheruy, Frederique; Dufresne, Jean-Louis; Ait Mesbah, Sonia; Grandpeix, Jean-Yves; Wang, Fuxing

2017-04-01

A simple model based on the surface energy budget at equilibrium is developed to compute the sensitivity of the climatological mean daily temperature and diurnal amplitude to the soil thermal inertia. It gives a conceptual framework to quantity the role of the atmospheric and land surface processes in the surface temperature variability and relies on the diurnal amplitude of the net surface radiation, the sensitivity of the turbulent fluxes to the surface temperature and the thermal inertia. The performances of the model are first evaluated with 3D numerical simulations performed with the atmospheric (LMDZ) and land surface (ORCHIDEE) modules of the Institut Pierre Simon Laplace (IPSL) climate model. A nudging approach is adopted, it prevents from using time-consuming long-term simulations required to account for the natural variability of the climate and allow to draw conclusion based on short-term (several years) simulations. In the moist regions the diurnal amplitude and the mean surface temperature are controlled by the latent heat flux. In the dry areas, the relevant role of the stability of the boundary layer and of the soil thermal inertia is demonstrated. In these regions, the sensitivity of the surface temperature to the thermal inertia is high, due to the high contribution of the thermal flux to the energy budget. At high latitudes, when the sensitivity of turbulent fluxes is dominated by the day-time sensitivity of the sensible heat flux to the surface temperature and when this later is comparable to the thermal inertia term of the sensitivity equation, the surface temperature is also partially controlled by the thermal inertia which can rely on the snow properties; In the regions where the latent heat flux exhibits a high day-to-day variability, such as transition regions, the thermal inertia has also significant impact on the surface temperature variability . In these not too wet (energy limited) and not too dry (moisture-limited) soil moisture (SM

Bounded Memory, Inertia, Sampling and Weighting Model for Market Entry Games

Directory of Open Access Journals (Sweden)

Yi-Shan Lee

2011-03-01

Full Text Available This paper describes the “Bounded Memory, Inertia, Sampling and Weighting” (BI-SAW model, which won the http://sites.google.com/site/gpredcomp/Market Entry Prediction Competition in 2010. The BI-SAW model refines the I-SAW Model (Erev et al. [1] by adding the assumption of limited memory span. In particular, we assume when players draw a small sample to weight against the average payoff of all past experience, they can only recall 6 trials of past experience. On the other hand, we keep all other key features of the I-SAW model: (1 Reliance on a small sample of past experiences, (2 Strong inertia and recency effects, and (3 Surprise triggers change. We estimate this model using the first set of experimental results run by the competition organizers, and use it to predict results of a second set of similar experiments later ran by the organizers. We find significant improvement in out-of-sample predictability (against the I-SAW model in terms of smaller mean normalized MSD, and such result is robust to resampling the predicted game set and reversing the role of the sets of experimental results. Our model’s performance is the best among all the participants.

Fast estimation of space-robots inertia parameters: A modular mathematical formulation

Science.gov (United States)

Nabavi Chashmi, Seyed Yaser; Malaek, Seyed Mohammad-Bagher

2016-10-01

This work aims to propose a new technique that considerably helps enhance time and precision needed to identify ;Inertia Parameters (IPs); of a typical Autonomous Space-Robot (ASR). Operations might include, capturing an unknown Target Space-Object (TSO), ;active space-debris removal; or ;automated in-orbit assemblies;. In these operations generating precise successive commands are essential to the success of the mission. We show how a generalized, repeatable estimation-process could play an effective role to manage the operation. With the help of the well-known Force-Based approach, a new ;modular formulation; has been developed to simultaneously identify IPs of an ASR while it captures a TSO. The idea is to reorganize the equations with associated IPs with a ;Modular Set; of matrices instead of a single matrix representing the overall system dynamics. The devised Modular Matrix Set will then facilitate the estimation process. It provides a conjugate linear model in mass and inertia terms. The new formulation is, therefore, well-suited for ;simultaneous estimation processes; using recursive algorithms like RLS. Further enhancements would be needed for cases the effect of center of mass location becomes important. Extensive case studies reveal that estimation time is drastically reduced which in-turn paves the way to acquire better results.

[The impact of therapeutic inertia and the degree of the medication adherence on the control goals for patients with diabetes].

Science.gov (United States)

López-Simarro, F; Moral, I; Aguado-Jodar, A; Cols-Sagarra, C; Mancera-Romero, J; Alonso-Fernández, M; Miravet-Jiménez, S; Brotons, C

2017-11-21

The purpose of this study was to analyse both the impact of low therapeutic adherence (TA) and therapeutic inertia (TI) on poor blood glucose control and on risk factors for heart disease in patients with DM2. A cross-sectional study was conducted in a Primary Halth Care centre. A total of 320 patients with DM2 were included and an assessment was made of control goals (HbA1c≤7%, blood pressure ≤130/80mmHg, and LDL-cholesterol≤100mg/dl). A pharmacy retrieval inertia were found in a high percentage of poorly-controlled DM2 patients with bad control. Therapeutic inertia was found to be of great relevance in this study. Copyright © 2017 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España, S.L.U. All rights reserved.

Effect of hiding places, straw and territory on agression in group-housed rabbit does

NARCIS (Netherlands)

Rommers, J.M.; Reuvekamp, B.F.J.; Gunnink, H.; Jong, de I.C.

2014-01-01

Group-housing of rabbit does may be preferred from welfare point of view. However, group-housing causes agonistic behaviour which may cause severe injuries. Severe injuries may be prevented by offering hiding places for attacked does. Providing enrichment (straw) may reduce agonistic behaviour by

A Rotating Speed Controller Design Method for Power Levelling by Means of Inertia Energy in Wind Power Systems

DEFF Research Database (Denmark)

Qin, Zian; Blaabjerg, Frede; Loh, Poh Chiang

2015-01-01

Power fluctuation caused by wind speed variations may be harmful for the stability of the power system as well as the reliability of the wind power converter, since it may induce thermal excursions in the solder joints of the power modules. Using the wind turbine rotor inertia energy for power...... in the frequency domain for power leveling. Moreover, the impact of other parameters on power leveling, including the time constant of maximum power point tracking (MPPT) and the rotor inertia, are also studied. With the proposed optimal design, the power fluctuations are mitigated as much as possible, while...

Rotational inertia of continents: A proposed link between polar wandering and plate tectonics

Science.gov (United States)

Kane, M.F.

1972-01-01

A mechanism is proposed whereby displacement between continents and the earth's pole of rotation (polar wandering) gives rise to latitudinal transport of continental plates (continental drift) because of their relatively greater rotational inertia. When extended to short-term polar wobble, the hypothesis predicts an energy change nearly equivalent to the seismic energy rate.

Effects of artificial dawn on sleep inertia, skin temperature, and the awakening cortisol response

NARCIS (Netherlands)

van de Werken, Maan; Gimenez, Marina C.; de Vries, Bonnie; Beersma, Domien G. M.; van Someren, Eus J. W.; Gordijn, Marijke C. M.

P>The effect of artificial dawn during the last 30 min of sleep on subsequent dissipation of sleep inertia was investigated, including possible involvement of cortisol and thermoregulatory processes. Sixteen healthy subjects who reported difficulty with waking up participated in random order in a

Normal feline behaviour: … and why problem behaviours develop.

Science.gov (United States)

Bradshaw, John

2018-05-01

Practical relevance: Cats are descended from a solitary, territorial ancestor, and while domestication has reduced their inherited tendency to be antagonistic towards all animals larger than their typical prey, they still place more reliance on the security of their territory than on psychological attachments to people or other cats, the exact opposite to dogs. Many feline problem behaviours stem from perceived threats to this security, often due to conflicts with other cats. Others are more developmental in origin, often caused by inadequate exposure to crucial stimuli, especially people, during the socialisation period. Strongly aversive events experienced at any age can also contribute. A third category comprises normal behaviour that owners deem unacceptable, such as scratching of furniture. Evidence base: This review identifies three areas in which basic research is inadequate to support widely employed concepts and practices in feline behavioural medicine. First, classification of cats' problem behaviours relies heavily on approaches derived from studies of their behavioural ecology and, to some extent, extrapolation from canine studies. Few studies have focused on cats in the home, the environment in which most behavioural disorders are expressed. Secondly, cats' chemical senses (olfactory and vomeronasal) are far more sensitive than our own, making it difficult for owners or clinicians to fully comprehend the sensory information upon which they base their behaviour. Thirdly, although the concept of psychological distress is widely invoked as an intervening variable in behavioural disorders, there are still no reliable measures of distress for pet cats in the home. Global importance: Psychological distress of some kind is the primary cause of many of the behavioural problems presented to clinicians, but surveys indicate that many more cats display the same clinical signs without their owners ever seeking help. The welfare of this 'invisible' group could be

An object oriented implementation of the Yeadon human inertia model

Science.gov (United States)

Dembia, Christopher; Moore, Jason K.; Hubbard, Mont

2015-01-01

We present an open source software implementation of a popular mathematical method developed by M.R. Yeadon for calculating the body and segment inertia parameters of a human body. The software is written in a high level open source language and provides three interfaces for manipulating the data and the model: a Python API, a command-line user interface, and a graphical user interface. Thus the software can fit into various data processing pipelines and requires only simple geometrical measures as input. PMID:25717365

Dynamics of Small Inertia-Free Spheroidal Particles in a Turbulent Channel Flow

Science.gov (United States)

Challabotla, Niranjan Reddy; Zhao, Lihao; Andersson, Helge I.; Department of Energy; Process Engineering Team

2015-11-01

The study of small non-spherical particles suspended in turbulent fluid flows is of interest in view of the potential applications in industry and the environment. In the present work, we investigated the dynamics of inertia-free spheroidal particles suspended in fully-developed turbulent channel flow at Re τ = 180 by using the direct numerical simulations (DNS) for the Eulerian fluid phase coupled with the Lagrangian point-particle tracking. We considered inertia-free spheroidal particles with a wide range of aspect ratios from 0.01 to 50, i.e. from flat disks to long rods. Although the spheroids passively translate along with the fluid, the particle orientation and rotation strongly depend on the particle shape. The flattest disks were preferentially aligned with their symmetry axis normal to the wall, whereas the longest rods aligned parallel to the wall. Strong mean rotational spin was observed for spherical particles and this has been damped with increasing asphericity both for rod-like and disk-like spheroids. The anisotropic mean and fluctuating fluid vorticity resulted in particle spin anisotropies which exhibited a complex dependence on the particle asphericty. The Research Council of Norway, Notur and COST Action FP1005 are gratefully acknowledged.

Design, simulation and characterization of a MEMS inertia switch with flexible CNTs/Cu composite array layer between electrodes for prolonging contact time

International Nuclear Information System (INIS)

Wang, Yang; Yang, Zhuoqing; Xu, Qiu; Chen, Wenguo; Ding, Guifu; Zhao, Xiaolin

2015-01-01

This paper reports an inertia switch with a flexible carbon nanotubes/copper (CNTs/Cu) composite array layer between movable and fixed electrodes, which achieves a longer contact time compared to the traditional design using rigid-to-rigid impact between electrodes. The CNTs/Cu layer is fabricated using the composite electroplating method, and the whole device is completed by multi-layer metal electroplating based on the micro-electro-mechanical systems (MEMS) process. The dynamic responses of the designed inertia switch and the contact impact between a single CNT and a fixed electrode/another CNT have both been simulated by the ANSYS finite-element-method (FEM). It is shown that the contact time of the designed inertia switch is about 100 µs under the applied 80 g half-sine-shaped acceleration in the sensing direction. Finally, the fabricated MEMS inertia switch with the flexible CNTs/Cu composite array layer between electrodes has been evaluated by a dropping hammer system. The test contact time is about112 µs, which has a good agreement with the simulation and is much longer than that of the traditional design. (paper)

Frequency Activated Fast Power Reserve for Wind Power Plant Delivered from Stored Kinetic Energy in the Wind Turbine Inertia

DEFF Research Database (Denmark)

Knüppel, Thyge; Thuring, P.; Kumar, S

2011-01-01

is proposed that delivers a short-term power reserve from the kinetic energy in the wind turbine (WT) inertia, while considering the inherent characteristics of a wind power plant. The aim is to contribute with a fast power reserve to stabilize the frequency drop during large and sudden production deficits......With increased penetration of converter interfaced generation, synchronous generators may start to be displaced to keep the overall power balance. As a consequence the resulting inertia in the system may decrease and make the power system more exposed to frequency excursions. Here, a control...

The inertia of urban systems and the timing of public policies in front of energetic and climatic risks

International Nuclear Information System (INIS)

Gusdorf, F.

2008-02-01

After a brief description of the context of urban policies, the author highlights the reasons of the particular vulnerability of cities in front of different types of shocks in connection with energy or climate risks. He shows that the consequences are mainly related to the behaviours of economic actors and to urban inertia. He assesses the vulnerability of cities and puts this vulnerability within a wider perspective while recalling to which extent interactions between transport costs and housing prices have always been at the heart of urban history. He proposes an empirical assessment of this relationship, identifies some types of cities which are susceptible to be more resilient to shocks, and tries to assess the advantages of a dense city compared to a sprawled city. The author identifies the limits of this approach: strong re-distributive effects, need for a finer time and spatial analysis, need for an innovating analysis tool. In this perspective, he uses the NEDUM model (Non Equilibrium Dynamic Urban Model) to analyse different implementation rates of a given price signal, and highlights the re-distributive consequences of a quickly implemented carbon tax

Helping 'light green' consumers walk the talk. Results of a behavioural intervention survey in the Swiss electricity market

Energy Technology Data Exchange (ETDEWEB)

Litvine, Dorian [University of Montpellier 1, LASER-CREDEN, UFR d' Economie, Montpellier (France); Wuestenhagen, Rolf [University of St. Gallen (Switzerland). IWOe-HSG

2011-01-15

While many consumer surveys show very positive attitudes towards renewable energy, the share of consumers actually purchasing green electricity is still in the single-digit percent range in most countries. What can be done to help consumers with positive attitudes towards green electricity to 'walk the talk', i.e. to behave consistently with their preferences? We developed a psychological model based on the theory of planned behaviour (TPB) to design a large-scale behavioural intervention survey with 1163 Swiss electricity consumers. Our results show that by providing information targeted at the key factors influencing the intention to purchase green electricity, namely attitudes towards purchase, social norms and perceived behavioural control, a significant increase in green electricity market share can be achieved. Our results show that price is not the only barrier to purchasing green electricity, and that information to increase the perceived benefit of buying green electricity as well as targeted communication to overcome inertia among retail electricity consumers are equally important factors. (author)

How consumers respond to the behavior of missing a free gift promotion: inaction inertia effect on products offered as free gifts.

Science.gov (United States)

Liu, Tsung-Chi; Cheng, Ti; Ni, Feng-Yu

2011-01-01

Inaction inertia describes the phenomenon that an individual is unlikely to act on an attractive opportunity after having bypassed an even more attractive one. The results of two experiments indicate that after missing an initial opportunity to obtain a product as a free gift during a promotional period, the inaction inertia effect reduces the likelihood of consumers buying the product at a discounted price (second, inferior opportunity), particularly if the free gift has a high regular price. Additionally, according to the results of Experiment 2, those consumers are less likely to buy a product that has been offered previously as a free gift when a greater total quantity of the free gift is offered during a promotional period. Moreover, the mediation analysis results indicate that anticipated regret and valuation significantly impact the mediating role of inaction inertia.

Principal direction of inertia for 3D trajectories from patient-specific TMJ movement.

Science.gov (United States)

Kim, Dae-Seung; Choi, Soon-Chul; Lee, Sam-Sun; Heo, Min-Suk; Huh, Kyung-Hoe; Hwang, Soon-Jung; Kim, Seong-Ha; Yi, Won-Jin

2013-03-01

Accurate simulation and evaluation of mandibular movement is fundamental for the analysis of functional changes and effects of the mandible and maxilla before and after surgical treatments. We applied principal axes of inertia to the three-dimensional (3D) trajectories generated by patient-specific simulations of TMJ movements for the functional evaluations of mandible movement. Three-dimensional movements of the mandible and the maxilla were tracked based on a patient-specific splint and an optical tracking system. The dental occlusion recorded on the sprint provided synchronization for initial movement in the tracking and the simulation phases. The translation and rotation recorded during movement tracking was applied sequentially to the mandibular model in relation to a fixed maxilla model. The sequential 3D positions of selected landmarks on the mandible were calculated based on the reference coordinate system. The landmarks selected for analysis were bilateral condyles and pogonion points. The moment of inertia tensor was calculated with respect to the 3D trajectory points. Using the unit vectors along the principal axes derived from the tensor matrix, α, β and γ rotations around z-, y- and x-axes were determined to represent the principal directions as principal rotations respectively. The γ direction showed the higher standard deviation, variation of directions, than other directions at all the landmarks. The mandible movement has larger kinematic redundancy in the γ direction than α and β during mouth opening and closing. Principal directions of inertia would be applied to analyzing the changes in angular motion of trajectories introduced by mandibular shape changes from surgical treatments and also to the analysis of the influence of skeletal deformities on mandibular movement asymmetry. Copyright © 2012 Elsevier Ltd. All rights reserved.

Phenomenological descriptions of the Yrast bands in sup(160,162,164,166)Yb nuclei band crossings and moments of inertia

International Nuclear Information System (INIS)

El Zaiki, M.I.; Nafie, H.O.; Abd El Mageed, K.E.

1992-01-01

Two methods of calculations have been used to fit the previously presented data on rotationally aligned quasiparticle bands in sup(160,162,164,166)Yb. Backbendings of moment of inertia of the Yrast states can be reproduced reasonably well. The energy levels and the effective moment of inertia for both gs and s-band are calculated and compared with the experimental data. Band crossing interpretations are discussed for each nucleus. The interaction strength calculations are presented. (author). 17 refs., 7 figs., 4 tabs

A microscopic calculation of potentials and inertia parameters for heavy-ion collisions

International Nuclear Information System (INIS)

Flocard, H.; Vautherin, D.; Heenen, P.H.

1979-09-01

Within the adiabatic time dependent Hartree-Fock formalism, the potential V(R) and the inertia parameter M(R) corresponding to the symmetric heavy-ion collisions 12 C+ 12 C and 16 O+ 16 O are computed. It is found that the mass M(R) exhibits very sharp peaks. These peaks are shown to provide a plausible mechanism to explain the occurrence of quasi-molecular resonances

Business model innovation vs. business model inertia: The role of disruptive technologies

OpenAIRE

Vorbach, Stefan; Wipfler, Harald; Schimpf, Sven

2017-01-01

This contribution addresses the impact of disruptive technologies on business model innovation. While such technologies have the potential to significantly alter the way in which businesses operate, business model inertia hinders companies from adopting the new technological possibilities. Little research has focused on the difficulties incumbents face when innovating their business models. By reviewing current literature on business model innovation, this paper summarizes challenges companie...

Influence of the inertia and gravity on the boiling flows stability

International Nuclear Information System (INIS)

Delmastro, D.F.; Clausse, A.

1987-01-01

A study of boiling flows stability on the basis of a linear analysis is presented. From the homogeneous flows' conservation equations, a distributed parameters model, which allows to deal with the frequency field system, is obtained. The adimensional parameters which characterize the inertia effects and the gravity on the impulse equation, are identified. On the other hand, a mean volumes model which permits to gather analytic criteria helpful for the design and comprehension of the problem is developed. (Author)

Model investigation of fuel rod behaviour

International Nuclear Information System (INIS)

Girgis, M.M.; Wiesenack, W.; Stegemann, D.

1985-06-01

Thermal and mechanical behaviour of fuel rods can be explained but unsatisfactorily by models based of an axial symmetry concept. Recently developed models include, with respect to their thermal components, a simple method for the computation of the temperature distribution within the fuel, and they also take into account the influence of excentrically placed pellets for the computation of heat transfer in the cold gap. Additionally, a finite-element model is used to evaluate the effects of cracking and fragmentation on the thermal behaviour of pellets. The reaction of fuel and fuel cladding to external and internal loadings and the axial interaction between fuel and cladding are described in the mechanical portion of the model. A special case of axial coupling is the so-called random stacking interaction caused by fuel pellets placed excentrically at the cladding and sliding radially and axially. In the comparison of measurement results, both thermal and mechanical behaviour of different rods from the OECD Halden Reactor Project are subject to investigations. (RF) [de

A dynamic marketing model with best reply and inertia

International Nuclear Information System (INIS)

Bischi, Gian Italo; Cerboni Baiardi, Lorenzo

2015-01-01

In this paper we consider a nonlinear discrete-time dynamic model proposed by Farris et al. (2005) as a market share attraction model with two firms that decide marketing efforts over time according to best reply strategies with naïve expectations. The model also considers an adaptive adjustment toward best reply, a form of inertia or anchoring attitude, and we investigate the effects of heterogeneities among firms. A rich scenario of local and global bifurcations is obtained even with just two competing firms, and a comparison is proposed with apparently similar duopoly models based on repeated best reply dynamics with naïve expectations and adaptive adjustment.

Lagrangian transport characteristics of a class of three-dimensional inline-mixing flows with fluid inertia

NARCIS (Netherlands)

Speetjens, M.F.M.; Demissie, E.A.; Metcalfe, G.; Clercx, H.J.H.

2014-01-01

Laminar mixing by the inline-mixing principle is key to many industrial fluids-engineering systems of size extending from microns to meters. However, insight into fundamental transport phenomena particularly under the realistic conditions of three-dimensionality (3D) and fluid inertia remains

Polycrystalline magma behaviour in dykes: Insights from high-resolution numerical models

Science.gov (United States)

Yamato, Philippe; Duretz, Thibault; Tartèse, Romain; May, Dave

2013-04-01

The presence of a crystalline load in magmas modifies their effective rheology and thus their flow behaviour. In dykes, for instance, the presence of crystals denser than the melt reduces the ascent velocity and modifies the shape of the velocity profile from a Newtonian Poiseuille flow to a Bingham type flow. Nevertheless, several unresolved issues still remain poorly understood and need to be quantified: (1) What are the mechanisms controlling crystals segregation during magma ascent in dykes? (2) How does crystals transportation within a melt depend on their concentration, geometry, size and density? (3) Do crystals evolve in isolation to each other or as a cluster? (4) What is the influence of considering inertia of the melt within the system? In this study, we present numerical models following the setup previously used in Yamato et al. (2012). Our model setup simulates an effective pressure gradient between the base and the top of a channel (representing a dyke), by pushing a rigid piston into a magmatic mush that comprised crystals and melt and perforated by a hole. The initial resolution of the models (401x1551 nodes) has been doubled in order to ensure that the smallest crystalline fractions are sufficiently well resolved. Results show that the melt phase can be squeezed out from a crystal-rich magma when subjected to a given pressure gradient range and that clustering of crystals might be an important parameter controlling their behaviour. This demonstrates that crystal-melt segregation in dykes during magma ascent constitutes a viable mechanism for magmatic differentiation of residual melts. These results also explain how isolated crystal clusters and melt pockets, with different chemistry, can be formed. In addition, we discuss the impact of taking into account inertia in our models. Reference: Yamato, P., Tartèse, R., Duretz, T., May, D.A., 2012. Numerical modelling of magma transport in dykes. Tectonophysics 526-529, 97-109.

Transient Response Improvement of Microgrids Exploiting the Inertia of a Doubly-Fed Induction Generator (DFIG

Directory of Open Access Journals (Sweden)

Christina N. Papadimitriou

2010-06-01

Full Text Available Storage devices are introduced in microgrids in order to secure their power quality, power regularity and offer ancillary services in a transient period. In the transition period of a low voltage microgrid, from the connected mode of operation to the islanded mode of operation, the power unbalance can be partly covered by the inertia energy of the existing power sources. This paper proposes fuzzy local controllers exploiting the inertia of a Wind Turbine (WT with a Doubly Fed Induction Generator (DFIG, if such a machine exists in the microgrid, in order to decrease the necessary storage devices and the drawbacks that arise. The proposed controllers are based in fuzzy logic due to the non linear and stochastic behavior of the system. Two cases are studied and compared during the transient period where the microgrid architecture and the DFIG controller differ. In the first case, the understudy microgrid includes a hybrid fuel cell system (FCS-battery system and a WT with a DFIGURE. The DFIG local controller in this case is also based in fuzzy logic and follows the classical optimum power absorption scenario for the WT. The transition of the microgrid from the connected mode of operation to the islanded mode is evaluated and, especially, the battery contribution is estimated. In the second case, the battery is eliminated. The fuzzy controller of the DFIG during the transition provides primary frequency control and local bus voltage support exploiting the WT inertia. The response of the system is estimated in both cases using MATLAB/Simulink software package.

Modelling Affective Pain in Mice: Effects of Inflammatory Hypersensitivity on Place Escape/Avoidance Behaviour, Anxiety and Hedonic State

DEFF Research Database (Denmark)

Refsgaard, Louise Konradsen; Hoffmann-Petersen, Julie; Sahlholt, Maj

2016-01-01

and the dark area of a box while being stimulated with a suprathreshold filament on the untreated or treated paw, respectively. This was followed by a 30-min test with unrestricted movement. Anxiety-like behaviour, locomotor activity, and hedonic state were assessed with the elevated zero maze (EZM), an open...... PEAP and other behavioural responses, namely anxiety-like behaviour, locomotor activity, and hedonic state. New Method A novel paradigm assessing the affective component of pain in mice was developed by modifying the setup known from rat studies: Animals were forced to stay 2x5 min in the light...... field setup, and a saccharin preference test, respectively, and correlated with the PEAP behaviour to examine potentially confounding parameters of the novel paradigm. Results In the PEAP, CFA-treated animals spent more time in the light area. CFA also increased anxiety-like behaviour significantly...

Superfluid quenching of the moment of inertia in a strongly interacting Fermi gas

Science.gov (United States)

Riedl, S.; Sánchez Guajardo, E. R.; Kohstall, C.; Hecker Denschlag, J.; Grimm, R.

2011-03-01

We report on the observation of a quenched moment of inertia resulting from superfluidity in a strongly interacting Fermi gas. Our method is based on setting the hydrodynamic gas in slow rotation and determining its angular momentum by detecting the precession of a radial quadrupole excitation. The measurements distinguish between the superfluid and collisional origins of hydrodynamic behavior, and show the phase transition.

Moving the Weber fraction: the perceptual precision for moment of inertia increases with exploration force

NARCIS (Netherlands)

Debats, N.B.; Kingma, I.; Beek, P.J.; Smeets, J.B.J.

2012-01-01

How does the magnitude of the exploration force influence the precision of haptic perceptual estimates? To address this question, we examined the perceptual precision for moment of inertia (i.e., an object's "angular mass") under different force conditions, using the Weber fraction to quantify

Generic inertia emulation controller for multi-terminal voltage-source-converter high voltage direct current systems

DEFF Research Database (Denmark)

Zhu, Jiebei; Guerrero, Josep M.; Hung, William

2014-01-01

A generic Inertia Emulation Controller (INEC) scheme for Multi-Terminal Voltage-Source-Converter based HVDC (VSC-MTDC) systems is proposed and presented in this paper. The proposed INEC can be incorporated in any Grid-side Voltage-Source-Converter (GVSC) station, allowing the MTDC terminal...

A sit-ski design aimed at controlling centre of mass and inertia.

Science.gov (United States)

Langelier, Eve; Martel, Stéphane; Millot, Anne; Lessard, Jean-Luc; Smeesters, Cécile; Rancourt, Denis

2013-01-01

This article introduces a sit-ski developed for the Canadian Alpine Ski Team in view of the Vancouver 2010 Paralympic games. The design is predominantly based on controlling the mass distribution of the sit-ski, a critical factor in skiing performance and control. Both the antero-posterior location of the centre of mass and the sit-ski moment of inertia were addressed in our design. Our design provides means to adjust the antero-posterior centre of mass location of a sit-ski to compensate for masses that would tend to move the antero-posterior centre of mass location away from the midline of the binding area along the ski axis. The adjustment range provided is as large as 140 mm, thereby providing sufficient adaptability for most situations. The suspension mechanism selected is a four-bar linkage optimised to limit antero-posterior seat movement, due to suspension compression, to 7 mm maximum. This is about 5% of the maximum antero-posterior centre of mass control capacity (151 mm) of a human participant. Foot rest inclination was included in the design to modify the sit-ski inertia by as much as 11%. Together, these mass adjustment features were shown to drastically help athletes' skiing performance.

Evolutionary accounts of human behavioural diversity

Science.gov (United States)

Brown, Gillian R.; Dickins, Thomas E.; Sear, Rebecca; Laland, Kevin N.

2011-01-01

Human beings persist in an extraordinary range of ecological settings, in the process exhibiting enormous behavioural diversity, both within and between populations. People vary in their social, mating and parental behaviour and have diverse and elaborate beliefs, traditions, norms and institutions. The aim of this theme issue is to ask whether, and how, evolutionary theory can help us to understand this diversity. In this introductory article, we provide a background to the debate surrounding how best to understand behavioural diversity using evolutionary models of human behaviour. In particular, we examine how diversity has been viewed by the main subdisciplines within the human evolutionary behavioural sciences, focusing in particular on the human behavioural ecology, evolutionary psychology and cultural evolution approaches. In addition to differences in focus and methodology, these subdisciplines have traditionally varied in the emphasis placed on human universals, ecological factors and socially learned behaviour, and on how they have addressed the issue of genetic variation. We reaffirm that evolutionary theory provides an essential framework for understanding behavioural diversity within and between human populations, but argue that greater integration between the subfields is critical to developing a satisfactory understanding of diversity. PMID:21199836

Force Outputs during Squats Performed Using a Rotational Inertia Device under Stable versus Unstable Conditions with Different Loads.

Directory of Open Access Journals (Sweden)

Jairo Vázquez-Guerrero

Full Text Available The purpose of the study was to compare the force outputs achieved during a squat exercise using a rotational inertia device in stable versus unstable conditions with different loads and in concentric and eccentric phases. Thirteen male athletes (mean ± SD: age 23.7 ± 3.0 years, height 1.80 ± 0.08 m, body mass 77.4 ± 7.9 kg were assessed while squatting, performing one set of three repetitions with four different loads under stable and unstable conditions at maximum concentric effort. Overall, there were no significant differences between the stable and unstable conditions at each of the loads for any of the dependent variables. Mean force showed significant differences between some of the loads in stable and unstable conditions (P < 0.010 and peak force output differed between all loads for each condition (P < 0.045. Mean force outputs were greater in the concentric than in the eccentric phase under both conditions and with all loads (P < 0.001. There were no significant differences in peak force between concentric and eccentric phases at any load in either stable or unstable conditions. In conclusion, squatting with a rotational inertia device allowed the generation of similar force outputs under stable and unstable conditions at each of the four loads. The study also provides empirical evidence of the different force outputs achieved by adjusting load conditions on the rotational inertia device when performing squats, especially in the case of peak force. Concentric force outputs were significantly higher than eccentric outputs, except for peak force under both conditions. These findings support the use of the rotational inertia device to train the squatting exercise under unstable conditions for strength and conditioning trainers. The device could also be included in injury prevention programs for muscle lesions and ankle and knee joint injuries.

Behaviors and housing inertia are key factors in determining the consequences of a shock in transportation costs

International Nuclear Information System (INIS)

Gusdorf, Francois; Hallegatte, Stephane

2007-01-01

This paper investigates the consequences of a sudden increase in transportation costs when household behaviors and building inertia are accounted for. A theoretical framework is proposed, capturing the interactions between behaviors, transportation costs and urban structure. Numerical simulations show that changes in households and landowners' choices reduce significantly the long-term adverse effects of a shock in transportation costs. Indeed, the shock translates, over the long run, into a more concentrated housing that limits households utility losses and maintains landowners' income. But, because of building inertia, the shock leads first to a long transition, during which the adjustment is constrained by a suboptimal housing-supply structure. Then, households support larger losses than in the final stage, though lower than with no behavior adjustment, and landowners experience a large decrease in their aggregate income and an important redistribution of wealth. Thus, behaviors and building inertia are key factors in determining the vulnerability to transportation price variability and to the introduction of climate policies. Our policy conclusions are that: (i) if a long-term increase in transportation costs is unavoidable because of climate change or resource scarcity, a smooth change prevents to some extent the negative transition effects and (ii) fast-growing cities of the developing world can reduce their future vulnerability to shocks in transportation costs through the implementation of policies that limit urban sprawl

Cálculo de ejes y momentos principales de inercia. // The calculation of main axes and inertia momentum.

Directory of Open Access Journals (Sweden)

L. O’connor Montero

2001-07-01

Full Text Available Se describen cálculos clásicos para determinar ejes y momentos principales de inercia de un cuerpo, y se demuestra que sepueden realizar cálculos con el mismo propósito mediante la aplicación del Cálculo Tensorial, la Teoría Espectral y elAlgebra Lineal. Esto permite justificar los términos del título del trabajo constituye una extensión del modelo tensorial a laestática, que en correspondencia con los elementos que lo definen y según analogías con otras aplicaciones a la mecánicadan lugar a introducir la noción de tensor de inercia de un cuerpo. Bien interpretado, el modelo puede contribuir a cambiosimportantes en la enseñanza del álgebra en la Ingeniería.Palabras claves: Tensor, cálculo tensorial, ejes y momentos principales de inercia, tensor de inercia.________________________________________________________________________________Abstract.The tensors calculation and the spectral theory are applied to modelling the inertia state (main axes and momentum ofinertia of a body. This makes possible to enrich static engineering calculations and to generalise tensorial models beyondthe materials resistance, fluids mechanic and the plastic deformation theory. Well interpretated, the model can lead toimportant changes in algebra teaching for mechanical engineers.Key words: Tension member, tension calculation, inertia main axes , principals inertia momentum, inertiatension member.

A Novel Protection Method for Single Line-to-Ground Faults in Ungrounded Low-Inertia Microgrids

Directory of Open Access Journals (Sweden)

Liuming Jing

2016-06-01

Full Text Available This paper proposes a novel protection method for single line-to-ground (SLG faults in ungrounded low-inertia microgrids. The proposed method includes microgrid interface protection and unit protection. The microgrid interface protection is based on the difference between the zero-sequence voltage angle and the zero-sequence current angle at the microgrid interconnection transformer for fast selection of the faulty feeder. The microgrid unit protection is based on a comparison of the three zero-sequence current phase directions at each junction point of load or distributed energy resources. Methods are also included to locate the minimum fault section. The fault section location technology operates according to the coordination of microgrid unit protection. The proposed method responds to SLG faults that may occur in both the grid and the microgrid. Simulations of an ungrounded low-inertia microgrid with a relay model were carried out using Power System Computer Aided Design (PSCAD/Electromagnetic Transients including DC (EMTDC.

The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings

Directory of Open Access Journals (Sweden)

Thomas Hagemann

2017-01-01

Full Text Available This paper presents a combination of experimental data, CFD analyses, and bearing code predictions on emergence of convective inertia fluid forces within the lube oil flow of tilting-pad journal bearings. Concordantly, experimental data and CFD analyses show a significant rise of local pressure at the transition between inlet and leading edge of tilting-pad, especially for high-speed applications with surface speeds up to 100 m/s. This effect can be related to convective inertia forces within fluid flow as cross-sections and flow character rapidly change at the pad entrance. An energy-based approach is implemented in the bearing code in order to provide enhanced boundary conditions for Reynolds equation considering this effect. As a result, predictions of bearing code achieved significant improved correlation with measured pressure distributions and CFD-data. Further, beside the local influence, a nonnegligible impact on characteristic parameters of bearing operation such as maximum temperature and stiffness and damping coefficients is observed. Finally, the results are critically analyzed and requirements to gain more distinct and reliable data are specified.

[Beat therapeutic inertia in dyslipidemic patient management: A challenge in daily clinical practice] [corrected].

Science.gov (United States)

Morales, Clotilde; Mauri, Marta; Vila, Lluís

2014-01-01

Beat therapeutic inertia in dyslipidemic patient management: a challenge in daily clinical practice. In patients with dyslipidemia, there is the need to reach the therapeutic goals in order to get the maximum benefit in the cardiovascular events risk reduction, especially myocardial infarction. Even having guidelines and some powerful hypolipidemic drugs, the goals of low-density lipoprotein-cholesterol (LDL-c) are often not reached, being of special in patients with a high cardiovascular risk. One of the causes is the therapeutic inertia. There are tools to plan the treatment and make the decisions easier. One of the challenges in everyday clinical practice is to know the needed percentage of reduction in LDL-c. Moreover: it is hard to know which one is the treatment we should use in the beginning of the treatment but also when the desired objective is not reached. This article proposes a practical method that can help solving these questions. Copyright © 2013 Sociedad Española de Arteriosclerosis. Published by Elsevier España. All rights reserved.

The Dynamics of Online Purchase Visits: Inertia or Switching?

Institute of Scientific and Technical Information of China (English)

Zelin Zhang; Xia Wang; Peter T.L.Popkowski Leszczyc; Xiao Zuo

2016-01-01

This paper studies the dynamics of online purchase patterns,focusing on the impact of the channel used on conversion probability,as well as the transition of channel use over time.A novel data set from a major Chinese online travel agency is used for analysis,consisting of four months of data with 24,337 store visits through three types of channels:direct visit,search advertising and referral.Results of a Bayesian multinomial logit model show that the search channel significantly affects consumers' conversion probability,and show a high degree of inertia in channel use.This finding contrasts sharply with suggestions of previous research that most future purchases will converge to the direct-visit channel.

Parallel algorithms for computation of the manipulator inertia matrix

Science.gov (United States)

Amin-Javaheri, Masoud; Orin, David E.

1989-01-01

The development of an O(log2N) parallel algorithm for the manipulator inertia matrix is presented. It is based on the most efficient serial algorithm which uses the composite rigid body method. Recursive doubling is used to reformulate the linear recurrence equations which are required to compute the diagonal elements of the matrix. It results in O(log2N) levels of computation. Computation of the off-diagonal elements involves N linear recurrences of varying-size and a new method, which avoids redundant computation of position and orientation transforms for the manipulator, is developed. The O(log2N) algorithm is presented in both equation and graphic forms which clearly show the parallelism inherent in the algorithm.

Correlations Between Olivine Abundance and Thermal Inertia: Implications for Global Weathering and/or Alteration on Mars

Science.gov (United States)

Hamilton, V. E.; McDowell, M. L.; Koeppen, W. C.

2010-03-01

TES data show no global trend between thermal inertia and olivine abundance. But it is premature to conclude that all dark surfaces were once more mafic OR that olivine is not preferentially removed from olivine-enriched outcrops as they erode.

EMOTIONAL BURNOUT SYNDROME: EFFECT ON CLINICAL INERTIA AND MEDICAL PRACTICE STEREOTYPES

Directory of Open Access Journals (Sweden)

R. A. Khokhlov

2016-01-01

Full Text Available Aim. To estimate the prevalence of burnout in primary care physicians and its influence on medical practice stereotypes and on clinical inertia.Material and Methods. The anonymous single-stage poll was carried out among 184 primary care physicians. The questionnaire included information about sex, age, period and conditions of work, established stereotypes of practices. Burnout was evaluated by Russian analog of Maslach Burnout Inventory. It was defined in high level of emotional exhaustion and depersonalization and low level of personal accomplishment 11 questions were developed to reveal of suboptimal medical practice (for example, “I do not discuss treatment options with patient and do not give full answers to his questions” or “I make diagnostic and treatment errors despite of my professional knowledge and inexperience”.Results. The burnout syndrome (or extreme grade of emotional burnout occurs in 13,1% and high level of emotional burnout – in 49,7% of primary care physicians. Features of suboptimal medical practice are usually found in 24,2% of primary care physicians at least monthly. It expresses more often in improper attitude to paqtients and their problems associated with a disease. Thus, burnout contributes to improper attitude to patients. Professional burnout affects established work stereotypes and can promote development of physician’s clinical inertia.Conclusion. As the burnout is common among primary care physicians, an adequate monitoring and prevention of this state is necessary in medical labour management.

EMOTIONAL BURNOUT SYNDROME: EFFECT ON CLINICAL INERTIA AND MEDICAL PRACTICE STEREOTYPES

Directory of Open Access Journals (Sweden)

R. A. Khokhlov

2009-01-01

Full Text Available Aim. To estimate the prevalence of burnout in primary care physicians and its influence on medical practice stereotypes and on clinical inertia.Material and Methods. The anonymous single-stage poll was carried out among 184 primary care physicians. The questionnaire included information about sex, age, period and conditions of work, established stereotypes of practices. Burnout was evaluated by Russian analog of Maslach Burnout Inventory. It was defined in high level of emotional exhaustion and depersonalization and low level of personal accomplishment 11 questions were developed to reveal of suboptimal medical practice (for example, “I do not discuss treatment options with patient and do not give full answers to his questions” or “I make diagnostic and treatment errors despite of my professional knowledge and inexperience”.Results. The burnout syndrome (or extreme grade of emotional burnout occurs in 13,1% and high level of emotional burnout – in 49,7% of primary care physicians. Features of suboptimal medical practice are usually found in 24,2% of primary care physicians at least monthly. It expresses more often in improper attitude to paqtients and their problems associated with a disease. Thus, burnout contributes to improper attitude to patients. Professional burnout affects established work stereotypes and can promote development of physician’s clinical inertia.Conclusion. As the burnout is common among primary care physicians, an adequate monitoring and prevention of this state is necessary in medical labour management.

Willingness to pay and preference for imported rice brands in Nigeria: Do price–quality differentials explain consumers’ inertia?

Directory of Open Access Journals (Sweden)

Uchenna Obih

2017-12-01

Full Text Available Background: Rice (Oryza sativa is the most consumed staple food in Nigeria. Consumers have persistently preferred and are willing to pay higher prices for imported rice despite improvements in the quality attributes of local rice brands in the last 5 years. Nigeria’s import bill of over $6million daily on rice is not only a drain on the country’s Forex reserves, but a threat to the development of the domestic rice industry. Previous studies on rice consumers’ behaviours have not explained the underlying reason of how consumers with imported brands preference mind-set make purchasing decisions when faced with both local and imported rice brands with almost similar quality attributes but different market prices. Aim: When making purchase decisions, consumers consider product quality in comparison to its price. This study attempts to explain how the differences in prices and quality attributes of local and imported rice brands determine consumer’s inertia against preference for imported rice brands in Nigeria. Setting: This study was conducted in the Federal Capital Territory of Nigeria using data sets collected from a survey of 460 rice consumer households. Methods: Data were collected using a structured questionnaire administered to the household heads during the face-to-face interview. Two separate binary logit regression models were estimated for households’ preference and WTP for imported rice. Results: The results show that price, household head’s age, household’s income and general perception are statistically significant variables explaining household’s preference and WTP for imported rice brands. Consumers’ inertia against preference and WTP for imported rice persists because of the negative price–quality differential gaps between local and imported rice brands. Conclusion: Rice consumers in Nigeria compare price and quality differentials before making a choice between local and imported rice brands. There is need

Internal Branding and Employee Brand Consistent Behaviours

DEFF Research Database (Denmark)

Mazzei, Alessandra; Ravazzani, Silvia

2017-01-01

constitutive processes. In particular, the paper places emphasis on the role and kinds of communication practices as a central part of the nonnormative and constitutive internal branding process. The paper also discusses an empirical study based on interviews with 32 Italian and American communication managers...... and 2 focus groups with Italian communication managers. Findings show that, in order to enhance employee brand consistent behaviours, the most effective communication practices are those characterised as enablement-oriented. Such a communication creates the organizational conditions adequate to sustain......Employee behaviours conveying brand values, named brand consistent behaviours, affect the overall brand evaluation. Internal branding literature highlights a knowledge gap in terms of communication practices intended to sustain such behaviours. This study contributes to the development of a non...

A tentative purely geometrical Machian framework for describing gravity and inertia

Energy Technology Data Exchange (ETDEWEB)

Goldoni, R

1979-03-03

A purely geometrical framework for implementing Machian ideas about inertia is proposed. Only coupling constants that are dimensionless in natural units are introduced, and the gravitational field equations for cosmological units are identical to Einstein's equations in any nonvacuum cosmology. It is suggested that the cosmos in this framework be identified with a superuniverse model in which the background structure is homogeneous and isotropic, while the observable universe is represented by one of the local inhomogeneities of the background. Experimental tests of the proposed model are briefly discussed.

A place for play? The influence of the home physical environment on children's physical activity and sedentary behaviour.

Science.gov (United States)

Maitland, Clover; Stratton, Gareth; Foster, Sarah; Braham, Rebecca; Rosenberg, Michael

2013-08-17

The home environment is an important influence on the sedentary behaviour and physical activity of children, who have limited independent mobility and spend much of their time at home. This article reviews the current evidence regarding the influence of the home physical environment on the sedentary behaviour and physical activity of children aged 8-14 years. A literature search of peer reviewed articles published between 2005 and 2011 resulted in 38 observational studies (21 with activity outcomes, 23 with sedentary outcomes) and 11 experimental studies included in the review. The most commonly investigated behavioural outcomes were television watching and moderate to vigorous physical activity. Media equipment in the home and to a lesser extent the bedroom were positively associated with children's sedentary behaviour. Physical activity equipment and the house and yard were not associated with physical activity, although environmental measures were exclusively self-reported. On the other hand, physical activity equipment was inversely associated with sedentary behaviours in half of studies. Observational studies that investigated the influence of the physical and social environment within the home space, found that the social environment, particularly the role of parents, was important. Experimental studies that changed the home physical environment by introducing a television limiting device successfully decreased television viewing, whereas the influence of introducing an active video game on activity outcomes was inconsistent. Results highlight that the home environment is an important influence on children's sedentary behaviour and physical activity, about which much is still unknown. While changing or controlling the home physical environment shows promise for reducing screen based sedentary behaviour, further interventions are needed to understand the broader impact of these changes. Future studies should prioritise investigating the influence of the home

Evolutionary learning processes as the foundation for behaviour change.

Science.gov (United States)

Crutzen, Rik; Peters, Gjalt-Jorn Ygram

2018-03-01

We argue that the active ingredients of behaviour change interventions, often called behaviour change methods (BCMs) or techniques (BCTs), can usefully be placed on a dimension of psychological aggregation. We introduce evolutionary learning processes (ELPs) as fundamental building blocks that are on a lower level of psychological aggregation than BCMs/BCTs. A better understanding of ELPs is useful to select the appropriate BCMs/BCTs to target determinants of behaviour, or vice versa, to identify potential determinants targeted by a given BCM/BCT, and to optimally translate them into practical applications. Using these insights during intervention development may increase the likelihood of developing effective interventions - both in terms of behaviour change as well as maintenance of behaviour change.

Frameworks for Understanding Challenging Behaviour in Out-of-Home Care

Science.gov (United States)

McLean, Sara; Kettler, Lisa; Delfabbro, Paul; Riggs, Damien

2012-01-01

Background: Challenging and disruptive behaviour is commonly reported among children placed in the out-of-home care sector. Little is known about how stakeholders in this sector understand or manage challenging behaviour. Method: Ninety-two stakeholders in the South Australian out-of-home care sector were interviewed about their approach to…

Investigation of Slow-wave Activity Saturation during Surgical Anesthesia Reveals a Signature of Neural Inertia in Humans.

Science.gov (United States)

Warnaby, Catherine E; Sleigh, Jamie W; Hight, Darren; Jbabdi, Saad; Tracey, Irene

2017-10-01

Previously, we showed experimentally that saturation of slow-wave activity provides a potentially individualized neurophysiologic endpoint for perception loss during anesthesia. Furthermore, it is clear that induction and emergence from anesthesia are not symmetrically reversible processes. The observed hysteresis is potentially underpinned by a neural inertia mechanism as proposed in animal studies. In an advanced secondary analysis of 393 individual electroencephalographic data sets, we used slow-wave activity dose-response relationships to parameterize slow-wave activity saturation during induction and emergence from surgical anesthesia. We determined whether neural inertia exists in humans by comparing slow-wave activity dose responses on induction and emergence. Slow-wave activity saturation occurs for different anesthetics and when opioids and muscle relaxants are used during surgery. There was wide interpatient variability in the hypnotic concentrations required to achieve slow-wave activity saturation. Age negatively correlated with power at slow-wave activity saturation. On emergence, we observed abrupt decreases in slow-wave activity dose responses coincident with recovery of behavioral responsiveness in ~33% individuals. These patients are more likely to have lower power at slow-wave activity saturation, be older, and suffer from short-term confusion on emergence. Slow-wave activity saturation during surgical anesthesia implies that large variability in dosing is required to achieve a targeted potential loss of perception in individual patients. A signature for neural inertia in humans is the maintenance of slow-wave activity even in the presence of very-low hypnotic concentrations during emergence from anesthesia.

Weight, gravitation, inertia, and tides

Science.gov (United States)

Pujol, Olivier; Lagoute, Christophe; Pérez, José-Philippe

2015-11-01

This paper deals with the factors that influence the weight of an object near the Earth's surface. They are: (1) the Earth's gravitational force, (2) the centrifugal force due to the Earth's diurnal rotation, and (3) tidal forces due to the gravitational field of the Moon and Sun, and other solar system bodies to a lesser extent. Each of these three contributions is discussed and expressions are derived. The relationship between weight and gravitation is thus established in a direct and pedagogical manner readily understandable by undergraduate students. The analysis applies to the Newtonian limit of gravitation. The derivation is based on an experimental (or operational) definition of weight, and it is shown that it coincides with the Earth’s gravitational force modified by diurnal rotation around a polar axis and non-uniformity of external gravitational bodies (tidal term). Two examples illustrate and quantify these modifications, respectively the Eötvös effect and the oceanic tides; tidal forces due to differential gravitation on a spacecraft and an asteroid are also proposed as examples. Considerations about inertia are also given and some comments are made about a widespread, yet confusing, explanation of tides based on a centrifugal force. Finally, the expression of the potential energy of the tide-generating force is established rigorously in the appendix.

Weight, gravitation, inertia, and tides

International Nuclear Information System (INIS)

Pujol, Olivier; Lagoute, Christophe; Pérez, José-Philippe

2015-01-01

This paper deals with the factors that influence the weight of an object near the Earth's surface. They are: (1) the Earth's gravitational force, (2) the centrifugal force due to the Earth's diurnal rotation, and (3) tidal forces due to the gravitational field of the Moon and Sun, and other solar system bodies to a lesser extent. Each of these three contributions is discussed and expressions are derived. The relationship between weight and gravitation is thus established in a direct and pedagogical manner readily understandable by undergraduate students. The analysis applies to the Newtonian limit of gravitation. The derivation is based on an experimental (or operational) definition of weight, and it is shown that it coincides with the Earth’s gravitational force modified by diurnal rotation around a polar axis and non-uniformity of external gravitational bodies (tidal term). Two examples illustrate and quantify these modifications, respectively the Eötvös effect and the oceanic tides; tidal forces due to differential gravitation on a spacecraft and an asteroid are also proposed as examples. Considerations about inertia are also given and some comments are made about a widespread, yet confusing, explanation of tides based on a centrifugal force. Finally, the expression of the potential energy of the tide-generating force is established rigorously in the appendix. (paper)

Isovector pairing effect on nuclear moment of inertia at finite temperature in N = Z even–even systems

International Nuclear Information System (INIS)

Ami, I.; Fellah, M.; Allal, N.H.; Benhamouda, N.; Oudih, M.R.; Belabbas, M.

2011-01-01

Expressions of temperature-dependent perpendicular (ℑ⊥) and parallel (ℑ‖) moments of inertia, including isovector pairing effects, have been established using the cranking method. They are derived from recently proposed temperature-dependent gap equations. The obtained expressions generalize the conventional finite-temperature BCS (FTBCS) ones. Numerical calculations have been carried out within the framework of the schematic Richardson model as well as for nuclei such as N = Z, using the single-particle energies and eigenstates of a deformed Woods–Saxon mean-field. ℑ⊥ and ℑ‖ have been studied as a function of the temperature. It has been shown that the isovector pairing effect on both the perpendicular and parallel moments of inertia is non-negligible at finite temperature. These correlations must thus be taking into account in studies of warm rotating nuclei in the N ≃ Z region. (author)

Dynamic model tracking design for low inertia, high speed permanent magnet ac motors.

Science.gov (United States)

Stewart, P; Kadirkamanathan, V

2004-01-01

Permanent magnet ac (PMAC) motors have existed in various configurations for many years. The advent of rare-earth magnets and their associated highly elevated levels of magnetic flux makes the permanent magnet motor attractive for many high performance applications from computer disk drives to all electric racing cars. The use of batteries as a prime storage element carries a cost penalty in terms of the unladen weight of the vehicle. Minimizing this cost function requires the minimum electric motor size and weight to be specified, while still retaining acceptable levels of output torque. This tradeoff can be achieved by applying a technique known as flux weakening which will be investigated in this paper. The technique allows the speed range of a PMAC motor to be greatly increased, giving a constant power range of more than 4:1. A dynamic model reference controller is presented which has advantages in ease of implementation, and is particularly suited to dynamic low inertia applications such as clutchless gear changing in high performance electric vehicles. The benefits of this approach are to maximize the torque speed envelope of the motor, particularly advantageous when considering low inertia operation. The controller is examined experimentally, confirming the predicted performance.

Tuned resonant mass or inerter-based absorbers: unified calibration with quasi-dynamic flexibility and inertia correction

DEFF Research Database (Denmark)

Krenk, Steen; Høgsberg, Jan Becker

2016-01-01

effects are included via a flexibility and an inertia coefficient, accounting for the effect of the non-resonant modes. The design procedure starts from a selected level of dynamic amplification and then determines the device parameters for an equivalent dynamic system, in which the background flexibility...

Lagrangian transport characteristics of a class of three-dimensional inline-mixing flows with fluid inertia

International Nuclear Information System (INIS)

Speetjens, M. F. M.; Demissie, E. A.; Metcalfe, G.; Clercx, H. J. H.

2014-01-01

Laminar mixing by the inline-mixing principle is a key to many industrial fluids-engineering systems of size extending from micrometers to meters. However, insight into fundamental transport phenomena particularly under the realistic conditions of three-dimensionality (3D) and fluid inertia remains limited. This study addresses these issues for inline mixers with cylindrical geometries and adopts the Rotated Arc Mixer (RAM) as a representative system. Transport is investigated from a Lagrangian perspective by identifying and examining coherent structures that form in the 3D streamline portrait. 3D effects and fluid inertia introduce three key features that are not found in simplified configurations: transition zones between consecutive mixing cells of the inline-mixing flow; local upstream flow (in certain parameter regimes); transition/inertia-induced breaking of symmetries in the Lagrangian equations of motion (causing topological changes in coherent structures). Topological considerations strongly suggest that there nonetheless always exists a net throughflow region between inlet and outlet of the inline-mixing flow that is strictly separated from possible internal regions. The Lagrangian dynamics in this region admits representation by a 2D time-periodic Hamiltonian system. This establishes one fundamental kinematic structure for the present class of inline-mixing flows and implies universal behavior in that all states follow from the Hamiltonian breakdown of one common integrable state. A so-called period-doubling bifurcation is the only way to eliminate transport barriers originating from this state and thus is a necessary (yet not sufficient) condition for global chaos. Important in a practical context is that a common simplification in literature, i.e., cell-wise fully-developed Stokes flow (“2.5D approach”), retains these fundamental kinematic properties and deviates from the generic 3D inertial case only in a quantitative sense. This substantiates its

Physical Pendulum Experiments to Enhance the Understanding of Moments of Inertia and Simple Harmonic Motion

Science.gov (United States)

Richardson, Tim H.; Brittle, Stuart A.

2012-01-01

This paper describes a set of experiments aimed at overcoming some of the difficulties experienced by students learning about the topics of moments of inertia and simple harmonic motion, both of which are often perceived to be complex topics amongst students during their first-year university courses. By combining both subjects in a discussion…

Place identity and place scale: the impact of place salience.

OpenAIRE

Bernardo, Fátima; Palma-Oliveira, José-Manuel

2013-01-01

Research about place, place identity and attachment supports the idea that bonds with places may differ depending on the place scale. Based on the view that identity is context-dependent, this paper brings to the table the impact of manipulating the salience of place on the intensity of place identity and place attachment reported. A study was designed to examine place identity and place attachment in two groups of residents (permanent and temporary) at three different scales (nei...

Are we looking in the wrong place? Implications for behavioural-based pain assessment in rabbits (Oryctolagus cuniculi and beyond?

Directory of Open Access Journals (Sweden)

Matthew C Leach

Full Text Available BACKGROUND: Successful observation of behaviour depends upon knowing both which behaviours to look for and focusing on the appropriate areas of the body to observe them. Behaviour based scoring systems have become increasingly widely used to assess animal pain and distress. Although studies are available demonstrating which behaviours need to be observed, there has been little attempt to assess how effectively observers apply such information when viewing an animal's behaviour. METHODOLOGY/PRINCIPAL FINDINGS: This study used historical video recordings of New Zealand white rabbits (Oryctolagus cuniculi considered to be experiencing varying degrees of post-operative pain to assess the pattern of observation and the ability to assess pain exhibited by both experienced and inexperienced human participants (n = 151. Eye tracking equipment was used to identify how quickly, how frequently, for how long different areas of the rabbit's body were attended to by the participants. Simple visual analogue scoring was used to assess the pain experienced in each sequence. The results demonstrate that irrespective of their experience or gender, observers focus first, more frequently and for longer on the face, compared to the abdomen, ears, back and hindquarters of the rabbit and that participants were poor at identifying rabbits in pain. Observing the back and hindquarters was correlated with 'correct' assessments and observing the face was correlated with 'incorrect' assessments. CONCLUSIONS: In conclusion, irrespective of experience and gender, observers focused on the face when using behaviour to assess pain and were unable to effectively identify rabbits in pain. Focusing on the face is unlikely to be effective when using behavioural indicators of pain since they involve other body areas. Alternatively, if animals exhibit pain-related facial expressions, then it could improve our ability to assess pain. In addition, these results have potential

The Problem of Inertia in a Friedmann Universe

Science.gov (United States)

Kazanas, Demosthenes

2012-01-01

In this talk I will discuss the origin of inertia in a curved spacetime, particularly the spatially flat, open and closed Friedmann universes. This is done using Sciama's law of inertial induction, which is based on Mach's principle, and expresses the analogy between the retarded far fields of electrodynamics and those of gravitation. After obtaining covariant expressions for electromagnetic fields due to an accelerating point charge in Friedmann models, we adopt Sciama's law to obtain the inertial force on an accelerating mass $m$ by integrating over the contributions from all the matter in the universe. The resulting inertial force has the form $F = -kma$ where the constant $k < 1 $ depends on the choice of the cosmological parameters such as $\\Omega_{M},\\ \\Omega_{\\Lambda}, $ and $\\Omega_{R}$. The values of $k$ obtained suggest that inertial contribution from dark matter can be the source for the missing part of the inertial force.

Independent particle Schroedinger Fluid: moments of inertia

International Nuclear Information System (INIS)

Kan, K.K.; Griffin, J.J.

1977-10-01

This philosophy of the Single Particle Schroedinger Fluid, especially as regards the velocity fields which find such a natural role therein, is applied to the study of the moments of inertia of independent Fermion system. It is shown that three simplified systems exhibit the rigid-body rotational velocity field in the limit of large A, and that the leading deviations, both on the average and fluctuating, from this large A limit can be described analytically, and verified numerically. For a single particle in a Hill-Wheeler box the moments are studied numerically, and their large fluctuations identified with the specific energy level degeneracies of its parallelepiped shape. The full assemblage of these new and old results is addressed to the question of the necessary and sufficient condition that the moment have the rigid value. Counterexamples are utilized to reject some conditions, and the conjecture is argued that Unconstrained Shape Equilibrium might be the necessary and sufficient condition. The spheroidal square well problem is identified as a promising test case

The concept of behavioural needs in contemporary fur science

DEFF Research Database (Denmark)

Kornum, A.L.; Röcklinsberg, H.; Gjerris, Mickey

2017-01-01

show that mink place high value on swimming water, whereas other studies indicate the opposite, which has led scientists to question whether this preference constitutes a genuine behavioural need. In this paper, we take a methodological turn and discuss whether the oft-used concept of behavioural needs......This paper discusses the ethical implications of applying the concept of behavioural needs to captive animals. This is done on the basis of analysing the scientific literature on farmed mink and their possible need for swimming. In the wild, American mink (Mustela vison) are semi-aquatic predators...

Problem gambling and help seeking among Chinese international students: narratives of place identity transformation.

Science.gov (United States)

Li, Wendy Wen; Tse, Samson

2015-03-01

This article uses examples of problem gambling and help seeking among Chinese international students in New Zealand to demonstrate place identity transformation. Two-wave narrative interviews were conducted with 15 Chinese international students. Place identity among participants is shown to be a process that features the transformation of participants' identity. While the casinos in which the Chinese international students gambled gave rise to negative place identities, positive place identities facilitated the participants to change their problematic gambling. Through the investigation of place identity transformation, this article promotes a strength-based, non-labelling approach to intervention for people who are concerned about their gambling behaviours. © The Author(s) 2015.

Sustainable Consumer Behaviour: A Collection of Empirical Studies

OpenAIRE

Gerrit Antonides

2017-01-01

We summarise the contributions in this special issue on sustainable consumer behaviour and place them in perspective. Several studies focus on macro- and meso-issues, and others on micro-issues of consumer behaviour. The studies employ a variety of methods, including surveys, field experiments, eye tracking, scale development, and contingent valuation. The 12 contributions from authors of 13 different countries show the wide and varied application of consumer research focused on sustainabilit...

A comparison of the consequences of thermospheric inertia on Saturn and Earth

Science.gov (United States)

Spain, T.; Achilleos, N.; Aruliah, A. L.

2008-09-01

ABSTRACT The ionosphere should react near-instantaneously to magnetospheric control via electric fields and particle precipitation. The neutral gas of the thermosphere becomes stirred up through collisions and momentum transfer with the ionospheric plasma, although with a time lag in response because of its much larger population mass [1]. The thermosphere thus responds to magnetospheric drivers with a modulating influence owing to its inertia. This study investigates the effect of thermospheric inertia on the energy drawn from the magnetosphere and redistributed as Joule heating and acceleration of the neutral gas. The decay of ionospheric currents and consequent magnetic perturbations are also studied. The UCL Saturn model [2] and CTIP Earth [3] model will each be used for 2 simulations: the first a steadystate 'quiet' simulation and the second including the representation of a geomagnetic storm lasting for an extended period that is then turned off. For each planet, comparisons will be made between these two simulations for the period immediately following the storm, when the electric field and particle precipitation drivers of the 'storm' simulations have returned to values in accordance with the 'quiet' models. The differences between the steady state and previously active simulations will be purely due to thermospheric inertia [4]. It is anticipated that the response of the Gas Giant will be very different from the Earth due to differences in the size, rotational speed, flow timescales [5] [6] and composition of the respective planetary environments. References [1] Schunk, R. W., 1987, Physica Scripta, T18, pp. 256- 275, doi: 10.1088/0031-8949/1987/T18/026. [2] Smith, C. G. A. and Aylward, A. D. and Millward, G. H. and Miller, S. and Moore, L. E., 2007, Nature, 445 (7126), pp. 399-401. [3] Millward, G. H. and Moffett, R. J. and Quegan, S. and Fuller-Rowell, T. J., 1996, in The STEP Handbook of Ionospheric Models, R.W. Schunk ed., Utah State University. [4

The earth's equatorial principal axes and moments of inertia

Science.gov (United States)

Liu, H. S.; Chao, B. F.

1991-01-01

The earth's equatorial principal moments of inertia are given as A and B, where A is less than B, and the corresponding principal axes are given as a and b. Explicit formulas are derived for determining the orientation of a and b axes and the difference B - A using C(22) and S(22), the two gravitational harmonic coefficients of degree 2 and order 2. For the earth, the a axis lies along the (14.93 deg W, 165.07 deg E) diameter, and the b axis lies perpendicular to it along the (75.07 deg E, 104.93 deg W) diameter. The difference B - A is 7.260 x 10 to the -6th MR2. These quantities for other planets are contrasted, and geophysical implications are discussed.

Waste canister closure welding using the inertia friction welding process

International Nuclear Information System (INIS)

Klein, R.F.; Siemens, D.H.; Kuruzar, D.L.

1986-02-01

Liquid radioactive waste presently stored in underground tanks is to undergo a vitrifying process which will immobilize it in a solid form. This solid waste will be contained in a stainless steel canister. The canister opening requires a positive seal weld, the properties and thickness of which are at least equal to those of the canister material. This paper describes the inertia friction welding process and a proposed equipment design concept that will provide a positive, reliable, inspectable, and full thickness seal weld while providing easily maintainable equipment, even though the weld is made in a highly contaminated hot cell. All studies and tests performed have shown the concept to be highly feasible. 2 refs., 6 figs

The Use of Force Sensors and a Computer System to Introduce the Concept of Inertia at a School

Science.gov (United States)

Bogacz, Bogdan F.; Pedziwiatr, Antoni T.

2014-01-01

A classical experiment used to introduce the concept of body inertia, breaking of a thread below and above a hanging weight, is described mathematically and presented in a new way, using force sensors and a computer system.

Analisa Variable Moment of Inertia (VMI Flywheel pada Hydro-Shock Absorber Kendaraan

Directory of Open Access Journals (Sweden)

Hasbulah Zarkasy

2017-01-01

Full Text Available Flywheel selama ini dimanfaatkan untuk menyimpan energi mekanik pada mesin, membuat mesin berputar dengan lebih lembut. Prinsip kerja dari flywheel adalah dengan memanfaatkan momen inersia. Baru-baru ini dilakukan penelitian lebih lanjut mengenai pemanfaatan dari flywheel, yakni pada sistem suspense, akan tetapi selama ini penelitian yang dilakukan terbatas pada flywheel dengan momen inersia yang konstan (Constant Moment of Inertia. Kali ini akan dilakukan penelitian mengenai Variable Moment of Inertia Flywhel atau dengan kata lain flywheel yang momen inersianya berubah-ubah. Flywheel ini terdiri dari dua bagian utama, yakni flywheel berongga dan slider yang dapat bergerak bebas di sepanjang guide track. Percobaan bertujuan untuk mengetahui bagaimana karakteristik gaya redam dari VMI Flywheel. Juga akan dianalisa seperti apa respon dinamis dari slider selama flywheel berputar. Selain itu respon dinamis kendaraan saat VMI Flywheel ini dipasangkan juga dianalisa. Hasil yang didapat menunjukkan bahwa variasi massa slider berpengaruh terhadap gaya redam yang dihasilkan oleh VMI Flywheel. Semakin besar massa slider, gaya redam yang muncul juga semakin besar. Faktor frekuensi input juga berpengaruh, sebab semakin besar frekuensi input yang pada shock absorber, gaya redam yang timbul juga membesar. Perpindahan yang dialami oleh slider juga tergantung pada jenis massa slider tersebut. Semakin besar massa slider, perpindahan yang dialami juga akan semakin besar. Performa VMI Flywheel secara umum pada frekuensi rendah. Sedangkan pada frekuensi tinggi, performa VMI Flywheel cenderung tidak bagus dan menyebabkan kendaraan tidak nyaman.

Reprint of: A numerical investigation of fine sediment resuspension in the wave boundary layer-Uncertainties in particle inertia and hindered settling

Science.gov (United States)

Cheng, Zhen; Yu, Xiao; Hsu, Tian-Jian; Balachandar, S.

2016-05-01

The wave bottom boundary layer is a major conduit delivering fine terrestrial sediments to continental margins. Hence, studying fine sediment resuspensions in the wave boundary layer is crucial to the understanding of various components of the earth system, such as carbon cycles. By assuming the settling velocity to be a constant in each simulation, previous turbulence-resolving numerical simulations reveal the existence of three transport modes in the wave boundary layer associated with sediment availabilities. As the sediment availability and hence the sediment-induced stable stratification increases, a sequence of transport modes, namely, (I) well-mixed transport, (II) formulation of lutocline resembling a two-layer system, and (III) completely laminarized transport are observed. In general, the settling velocity is a flow variable due to hindered settling and particle inertia effects. Present numerical simulations including the particle inertia suggest that for a typical wave condition in continental shelves, the effect of particle inertia is negligible. Through additional numerical experiments, we also confirm that the particle inertia tends (up to the Stokes number St = 0.2) to attenuate flow turbulence. On the other hand, for flocs with lower gelling concentrations, the hindered settling can play a key role in sustaining a large amount of suspended sediments and results in the laminarized transport (III). For the simulation with a very significant hindered settling effect due to a low gelling concentration, results also indicate the occurrence of gelling ignition, a state in which the erosion rate is always higher than the deposition rate. A sufficient condition for the occurrence of gelling ignition is hypothesized for a range of wave intensities as a function of sediment/floc properties and erodibility parameters.

Backbending feature of rotational spectra in the generalized variable-moment-of-inertia model and its equivalence with the Harris model

International Nuclear Information System (INIS)

Mantri, A.N.

1975-01-01

The equivalence of Harris model equations with those of the generalized variable-moment-of-inertia (GVMI) model given by Das et al. is examined in the light of backbending feature of the rotational states. It is shown that this feature is absent in the Harris model taken to any order. The GVMI model equations are found to be consistent and in one-to-one correspondence with an expansion of the square of the angular velocity in terms of a polynomial in the moment of inertia rather than with the Harris expansion and may give a backbending feature in some cases depending on the relative values of the parameters appearing in the potential energy term