WorldWideScience

Sample records for behaviour tailoring condition

  1. Tailored cognitive-behavioural therapy and exercise training improves the physical fitness of patients with fibromyalgia.

    Science.gov (United States)

    van Koulil, S; van Lankveld, W; Kraaimaat, F W; van Helmond, T; Vedder, A; van Hoorn, H; Donders, A R T; Wirken, L; Cats, H; van Riel, P L C M; Evers, A W M

    2011-12-01

    Patients with fibromyalgia have diminished levels of physical fitness, which may lead to functional disability and exacerbating complaints. Multidisciplinary treatment comprising cognitive-behavioural therapy (CBT) and exercise training has been shown to be effective in improving physical fitness. However, due to the high drop-out rates and large variability in patients' functioning, it was proposed that a tailored treatment approach might yield more promising treatment outcomes. High-risk fibromyalgia patients were randomly assigned to a waiting list control group (WLC) or a treatment condition (TC), with the treatment consisting of 16 twice-weekly sessions of CBT and exercise training tailored to the patient's cognitive-behavioural pattern. Physical fitness was assessed with two physical tests before and 3 months after treatment and at corresponding intervals in the WLC. Treatment effects were evaluated using linear mixed models. The level of physical fitness had improved significantly in the TC compared with the WLC. Attrition rates were low, effect sizes large and reliable change indices indicated a clinically relevant improvement among the TC. A tailored multidisciplinary treatment approach for fibromyalgia consisting of CBT and exercise training is well tolerated, yields clinically relevant changes, and appears a promising approach to improve patients' physical fitness. ClinicalTrials.gov ID NCT00268606.

  2. Excellent bonding behaviour of novel surface-tailored fibre ...

    Indian Academy of Sciences (India)

    Administrator

    tured completely before pull-out, leading to full utilization of its tensile strength, and ... Composite rods; surface tailoring; cementitious matrix; pull-out test; bonding characteristics. 1. ... machine (Lloyd LR50K) at a speed of 0∙5 mm/min with a.

  3. Effectiveness of a web-based health risk assessment with individually-tailored feedback on lifestyle behaviour: study protocol

    Directory of Open Access Journals (Sweden)

    Laan Eva K

    2012-03-01

    Full Text Available Abstract Background Physical inactivity, unhealthy dietary habits, smoking and high alcohol consumption are recognized risk factors for cardiovascular disease and cancer. Web-based health risk assessments with tailored feedback seem promising in promoting a healthy lifestyle. This study evaluates the effectiveness of a web-based health risk assessment with individually-tailored feedback on lifestyle behaviour, conducted in a worksite setting. Methods/Design The web-based health risk assessment starts with a questionnaire covering socio-demographic variables, family and personal medical history, lifestyle behaviour and psychological variables. Prognostic models are used to estimate individual cardiovascular risks. In case of high risk further biometric and laboratory evaluation is advised. All participants receive individually-tailored feedback on their responses to the health risk assessment questionnaire. The study uses a quasi-experimental design with a waiting list control group. Data are collected at baseline (T0 and after six months (T1. Within each company, clusters of employees are allocated to either the intervention or the control group. Primary outcome is lifestyle behaviour, expressed as the sum of five indicators namely physical activity, nutrition, smoking behaviour, alcohol consumption, and symptoms of burnout. Multilevel regression analysis will be used to answer the main research question and to correct for clustering effects. Baseline differences between the intervention and control group in the distribution of characteristics with a potential effect on lifestyle change will be taken into account in further analyses using propensity scores. Discussion This study will increase insight into the effectiveness of health risk assessments with tailored feedback and into conditions that may modify the effectiveness. This information can be used to design effective interventions for lifestyle behaviour change among employees. Trial

  4. Tailoring discrete quantum walk dynamics via extended initial conditions

    Energy Technology Data Exchange (ETDEWEB)

    Valcarcel, German J de; Roldan, Eugenio [Departament d' Optica, Universitat de Valencia, Dr Moliner 50, 46100-Burjassot, Spain, EU (Spain); Romanelli, Alejandro, E-mail: german.valcarcel@uv.es, E-mail: eugenio.roldan@uv.es, E-mail: alejo@fing.edu.uy [Instituto de Fisica, Facultad de IngenierIa, Universidad de la Republica, CC 30, CP 11000, Montevideo (Uruguay)

    2010-12-15

    We study the evolution of initially extended distributions in the coined quantum walk (QW) on the line. By analysing the dispersion relation of the process, continuous wave equations are derived whose form depends on the initial distribution shape. In particular, for a class of initial conditions, the evolution is dictated by the Schroedinger equation of a free particle. As that equation also governs paraxial optical diffraction, all of the phenomenology of the latter can be implemented in the QW. This allows us, in particular, to devise an initially extended condition leading to a uniform probability distribution whose width increases linearly with time, with increasing homogeneity.

  5. Tailoring discrete quantum walk dynamics via extended initial conditions

    International Nuclear Information System (INIS)

    Valcarcel, German J de; Roldan, Eugenio; Romanelli, Alejandro

    2010-01-01

    We study the evolution of initially extended distributions in the coined quantum walk (QW) on the line. By analysing the dispersion relation of the process, continuous wave equations are derived whose form depends on the initial distribution shape. In particular, for a class of initial conditions, the evolution is dictated by the Schroedinger equation of a free particle. As that equation also governs paraxial optical diffraction, all of the phenomenology of the latter can be implemented in the QW. This allows us, in particular, to devise an initially extended condition leading to a uniform probability distribution whose width increases linearly with time, with increasing homogeneity.

  6. Optimizing engagement with Internet-based health behaviour change interventions: comparison of self-assessment with and without tailored feedback using a mixed methods approach.

    Science.gov (United States)

    Morrison, Leanne; Moss-Morris, Rona; Michie, Susan; Yardley, Lucy

    2014-11-01

    Internet-based health behaviour interventions have variable effects on health-related outcomes. Effectiveness may be improved by optimizing the design of interventions. This study examined the specific effect on engagement of providing two different design features - tailoring and self-assessment. Three versions of an Internet-delivered intervention to support the self-care of mild bowel problems were developed that provided (1) self-assessment without tailored feedback, (2) self-assessment with tailored feedback, and (3) generic information only. A qualitative study explored participants' engagement with each version of the intervention (N = 24). A larger quantitative study systematically compared participants' use of the intervention and self-reported engagement using a partial factorial design (n = 178). Findings from the qualitative study suggested that self-assessment without tailored feedback appeared to be less acceptable to participants because it was viewed as offering no personal benefit in the absence of personalized advice. In the quantitative study, self-assessment without tailored feedback was associated with greater dropout than when provided in conjunction with tailored feedback. There were significant group differences in participants' engagement with the intervention and perceptions of the intervention. Self-assessment without tailored feedback was rated as marginally less engaging and was associated with fewer positive perceptions than the generic information condition. The acceptability of self-assessment or monitoring components may be optimized by also providing tailored feedback. Without tailored feedback, these components do not appear to be any more engaging than generic information provision. Statement of contribution What is already known on this subject? Digital interventions can be effective for improving a range of health outcomes and behaviours. There is huge variation in the success of different interventions using different

  7. Modal nudging in nonlinear elasticity: Tailoring the elastic post-buckling behaviour of engineering structures

    Science.gov (United States)

    Cox, B. S.; Groh, R. M. J.; Avitabile, D.; Pirrera, A.

    2018-07-01

    The buckling and post-buckling behaviour of slender structures is increasingly being harnessed for smart functionalities. Equally, the post-buckling regime of many traditional engineering structures is not being used for design and may therefore harbour latent load-bearing capacity for further structural efficiency. Both applications can benefit from a robust means of modifying and controlling the post-buckling behaviour for a specific purpose. To this end, we introduce a structural design paradigm termed modal nudging, which can be used to tailor the post-buckling response of slender engineering structures without any significant increase in mass. Modal nudging uses deformation modes of stable post-buckled equilibria to perturb the undeformed baseline geometry of the structure imperceptibly, thereby favouring the seeded post-buckling response over potential alternatives. The benefits of this technique are enhanced control over the post-buckling behaviour, such as modal differentiation for smart structures that use snap-buckling for shape adaptation, or alternatively, increased load-carrying capacity, increased compliance or a shift from imperfection sensitivity to imperfection insensitivity. Although these concepts are, in theory, of general applicability, we concentrate here on planar frame structures analysed using the nonlinear finite element method and numerical continuation procedures. Using these computational techniques, we show that planar frame structures may exhibit isolated regions of stable equilibria in otherwise unstable post-buckling regimes, or indeed stable equilibria entirely disconnected from the natural structural response. In both cases, the load-carrying capacity of these isolated stable equilibria is greater than the natural structural response of the frames. Using the concept of modal nudging it is possible to "nudge" the frames onto these equilibrium paths of greater load-carrying capacity. Due to the scale invariance of modal nudging

  8. CANDU fuel behaviour under LOCA conditions

    International Nuclear Information System (INIS)

    Kohn, E.

    1989-07-01

    This report summarizes the current understanding of CANDU fuel-element behaviour under loss-of-coolant (LOCA) accidents. It focuses on a key in-reactor verification experiment conducted at Idaho National Engineering Laboratory (INEL) and on three Canadian in-reactor tests. The in-reactor data, and the considerable body of supporting information developed from out-reactor tests, support the general conclusion that CANDU fuel behaviour during LOCA transients is well understood. Four elements of 37-element CANDU fuel-bundle design were tested under conditions typical of a large-break LOCA blowdown in a CANDU reactor. The purpose of the test was to confirm our current understanding of fuel behaviour under loss-of-coolant accident blowdown conditions. The test also provided data for comparison with predictions made with the steady-state and transient fuel-element performance codes ELESIM and ELOCA. Key components of typical LOCA transients were incorporated in the test: namely, a rapid depressurization rate of the hot coolant, a simultaneous power increase before decreasing to decay values (a power pulse), and prototype fuel element under pre-transient power and burnup conditions. The test was successfully completed in the Power Burst Facility (PBF) reactor at INEL under contract to Ontario Hydro and AECL. The three CANDU Owners Group LOCA tests performed at Chalk River Nuclear Laboratories measured both the thermal-mechanical response and fission-gas release resulting from exposure to a LOCA transient. Results from these three tests provided further confirmation that the behaviour of the fuel under LOCA conditions is understood

  9. Initiation of health-behaviour change among employees participating in a web-based health risk assessment with tailored feedback

    Directory of Open Access Journals (Sweden)

    Kraaijenhagen Roderik A

    2011-03-01

    Full Text Available Abstract Background Primary prevention programs at the worksite can improve employee health and reduce the burden of cardiovascular disease. Programs that include a web-based health risk assessment (HRA with tailored feedback hold the advantage of simultaneously increasing awareness of risk and enhancing initiation of health-behaviour change. In this study we evaluated initial health-behaviour change among employees who voluntarily participated in such a HRA program. Methods We conducted a questionnaire survey among 2289 employees who voluntarily participated in a HRA program at seven Dutch worksites between 2007 and 2009. The HRA included a web-based questionnaire, biometric measurements, laboratory evaluation, and tailored feedback. The survey questionnaire assessed initial self-reported health-behaviour change and satisfaction with the web-based HRA, and was e-mailed four weeks after employees completed the HRA. Results Response was received from 638 (28% employees. Of all, 86% rated the program as positive, 74% recommended it to others, and 58% reported to have initiated overall health-behaviour change. Compared with employees at low CVD risk, those at high risk more often reported to have increased physical activity (OR 3.36, 95% CI 1.52-7.45. Obese employees more frequently reported to have increased physical activity (OR 3.35, 95% CI 1.72-6.54 and improved diet (OR 3.38, 95% CI 1.50-7.60. Being satisfied with the HRA program in general was associated with more frequent self-reported initiation of overall health-behaviour change (OR 2.77, 95% CI 1.73-4.44, increased physical activity (OR 1.89, 95% CI 1.06-3.39, and improved diet (OR 2.89, 95% CI 1.61-5.17. Conclusions More than half of the employees who voluntarily participated in a web-based HRA with tailored feedback, reported to have initiated health-behaviour change. Self-reported initiation of health-behaviour change was more frequent among those at high CVD risk and BMI levels. In

  10. CANDU fuel behaviour under transient conditions

    International Nuclear Information System (INIS)

    Segel, A.W.L.

    1979-04-01

    The Canadian R and D program to understand CANDU fuel behaviour under transient conditions is described. Fuel sheath behaviour studies have led to the development of a model of transient plastic strain in inert gas, which integrates the deformation due to several mechanisms. Verification tests demonstrated that on average the model overpredicts strain by 20%. From oxidation kinetics studies a sheath failure embrittlement criterion based on oxygen distribution has been developed. We have also established a rate equation for high-temperature stress-dependent crack formation due to embrittlement of the sheath by beryllium. An electric, simulated fuel element is being used in laboratory tests to characterize the behaviour of fuel in the horizontal. In-reactor, post-dryout tests have been done for several years. There is an axially-segmented, axisymmetric fuel element model in place and a fully two-dimensional code is under development. Laboratory testing of bundles, in its early stages, deals with the effects of geometric distortion and sheath-to-sheath interaction. In-reactor, post-dryout tests of CANDU fuel bundles with extensive central UO 2 melting did not result in fuel fragmentation nor damage to the pressure tube. (author)

  11. How lay health workers tailor in effective health behaviour change interventions: a protocol for a systematic review.

    Science.gov (United States)

    Hodgins, Faith; Gnich, Wendy; Ross, Alastair J; Sherriff, Andrea; Worlledge-Andrew, Heather

    2016-06-16

    Lay health workers (LHWs) are utilised as a channel of delivery in many health interventions. While they have no formal professional training related to their role, they utilise their connections with the target group or community in order to reach individuals who would not normally readily engage with health services. Lay health worker programmes are often based on psychological theories of behaviour change that point to 'tailoring to individuals' needs or characteristics' as key to success. Although lay health workers have been shown to be effective in many contexts, there is, as yet, little clarity when it comes to how LHWs assess individuals' needs in order to tailor their interventions. This study aims to develop a better understanding of the effective implementation of tailoring in lay health worker interventions by appraising evidence and synthesising studies that report evaluations of tailored interventions. Health and psychology electronic databases (EMBASE, CINAHL, MEDLINE and PsycINFO) will be searched. Reference lists of included studies will also be searched. For articles that are deemed to be potentially relevant, we will employ a 'cluster searching' technique in order to identify all published papers related to a relevant intervention. Cluster searching will be undertaken in an effort to maximise the breadth and depth of description of the intervention. Quantitative studies will be assessed using the Quality Assessment Tool for Quantitative Studies, developed by the Effective Public Health Practice Project, ON, Canada. Qualitative studies will be assessed using the Critical Appraisal Skills Programme (CASP) checklist for qualitative research. Sythesising the data will enable the development of a taxonomy of strategies for the criteria used for individual assessment of recipients' needs and the ways in which messages or actions are tailored to these individual criteria by LHWs. This systematic review focuses specifically on how health promotion and

  12. Technetium behaviour under deep geological conditions

    International Nuclear Information System (INIS)

    Kumata, M.; Vandergraaf, T.T.

    1993-01-01

    The migration behaviour of technetium under deep geological conditions was investigated by performing column tests using groundwater and altered granitic rock sampled from a fracture zone in a granitic pluton at a depth of about 250 m. The experiment was performed under a pressure of about 0.7 MPa in a controlled atmosphere glove box at the 240 m level of the Underground Research Laboratory (URL) near Pinawa, Manitoba, Canada. The technetium was strongly sorbed on the dark mafic minerals in the column. With the exception of a very small unretarded fraction that was eluted with the tritiated water, no further breakthrough of technetium was observed. This strong sorption of technetium on the mineral surface was caused by reduction of Tc(VII), probably to Tc(IV) even though the groundwater was only mildly reducing. (author) 5 figs., 4 tabs., 15 refs

  13. Tailoring pharmacotherapy to specific eating behaviours in obesity: Can recommendations for personalised therapy be made from the current data?

    Science.gov (United States)

    Roberts, Carl A; Christiansen, Paul; Halford, Jason C G

    2017-08-01

    Pharmacotherapy provides an adjunct to behaviour modification in the management of obesity. There are a number of new drug therapies purportedly targeting appetite; liraglutide, and bupropion/naltrexone, which are European Medicines Agency and US Food and Drug Administration (FDA) approved, and lorcaserin and phentermine/topiramate, which have FDA approval only. Each of the six drugs, used singly or in combination, has distinct pharmacological, and presumably distinct behavioural, mechanisms of action, thus the potential to provide defined therapeutic options to personalise the management of obesity. Yet, with regard to pharmacotherapy for obesity, we are far from true personalised medicine. We review the limited mechanistic data with four mono and combination pharmacotherapies, to assess the potential for tailoring their use to target specific obesogenic behaviours. Potential treatment options are considered, but in the absence of adequate research in respect to effects of these drugs on eating behaviour, neural activity and psychological substrates that underlie poorly controlled eating, we are far from definitive therapeutic recommendations. Specific mechanistic studies and broader behavioural phenotyping, possibly in conjunction with pharmacogenetic research, are required to characterise responders for distinct pharmacotherapeutic options.

  14. Effects of a Tailored Incredible Years Teacher Classroom Management Programme on On-Task Behaviour of School Children with ADHD in Addis Ababa

    Science.gov (United States)

    Mohammed, Feruz

    2018-01-01

    Attention-Deficit/Hyperactivity Disorder (ADHD) is a persistent pattern of behaviours characterized by inattention, hyperactivity and impulsivity. This study evaluates the effects of a tailored Incredible Years Teacher Classroom Management (IYTCM) programme aimed to improve participating children's on-task behaviour in a group of 6 to 10 year old…

  15. Tailored cognitive-behavioural therapy and exercise training improves the physical fitness of patients with fibromyalgia

    NARCIS (Netherlands)

    Spillekom-van Koulil, S.; Lankveld, W.G.J.M. van; Kraaimaat, F.W.; Helmond, T. van; Vedder, A.; Hoorn, H. van; Donders, A.R.T.; Wirken, L.; Cats, H.; Riel, P.L.C.M. van; Evers, A.W.M.

    2011-01-01

    OBJECTIVES: Patients with fibromyalgia have diminished levels of physical fitness, which may lead to functional disability and exacerbating complaints. Multidisciplinary treatment comprising cognitive-behavioural therapy (CBT) and exercise training has been shown to be effective in improving

  16. Optimizing diesel combustion behaviour with tailor-made fuels from biomass

    Energy Technology Data Exchange (ETDEWEB)

    Kremer, Florian; Heuser, Benedikt [RWTH Aachen Univ. (Germany). Lehrstuhl fuer Verbrennungskraftmaschinen; Klankermayer, Juergen [RWTH Aachen Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie; Pischinger, Stefan

    2013-06-01

    Modem biofuels offer a vast potential to decrease engine out emissions while at the same time allowing a reduction of greenhouse gases produced from individual mobility. In order to deeply investigate and improve the complete path from biofuel production to combustion, in 2007 the cluster of excellence ''Tailor-Made Fuels from Biomass'' was installed at RWTH Aachen University. Since the start of the work in the cluster a whole variety of possible fuel candidates were identified and investigated, eventually leading to the definition of 2-methyltetrahydrofurane (2-MTHF) as a tailor-made biofuel for passenger car diesel engines. With 2-MTHF, a nearly soot-free combustion can be realized. This soot-free combustion behavior can partially be explained by the low self-ignition tendency and the therefore observed long ignition delays. Hereby, a good mixture preparation can be realized. This long ignition delay also results in high HC- and CO emissions, though, which are partially accompanied by increased noise emissions. In this work, the addition of di-n-butylether (DNBE) to 2-MTHF to reduce the described disadvantages will be analyzed. DNBE, a fuel that can be obtained via a reaction pathway defined in TMFB, is characterized by an extremely high Cetane number (CN- 100) and therefore very high self-ignitability. The effects of different mixtures of DNBE and 2-MTHF from 0% to 100% especially on the HC- and CO- and noise emissions will be carefully analyzed. In addition, the overall emission performance will be compared to standard EN590 Diesel as reference fuel. The results show that an adapted addition of DNBE to 2-MTHF can lead to a significant reduction of HC-, CO- and noise emissions while not sacrificing the benefits gained from the 2-MTHF's long ignition delays with regard to the particulate emissions. It can be proven that the use of two tailored biofuels with different self-ignitability such as 2-MTHF and DNBE allows to tailor the

  17. Individually tailored internet-based cognitive behaviour therapy for older adults with anxiety and depression: a randomised controlled trial.

    Science.gov (United States)

    Silfvernagel, Kristin; Westlinder, Anna; Andersson, Stina; Bergman, Kajsa; Diaz Hernandez, Rosario; Fallhagen, Line; Lundqvist, Ida; Masri, Nicole; Viberg, Linda; Forsberg, Marie-Louise; Lind, Maria; Berger, Thomas; Carlbring, Per; Andersson, Gerhard

    2018-07-01

    Mixed anxiety and depression is common among older adults. The aim of the study was to compare the effects of an eight-week-long tailored internet-supported cognitive behaviour therapy (ICBT) programme and to compare against the provision of weekly general support. A second aim was to investigate if pre-treatment cognitive flexibility and self-reported cognitive problems would predict outcome. We included 66 older adults (aged over 60 years) with mixed anxiety/depression following media recruitment and randomised them into treatment and control groups. We also included a one-year follow-up. As a measure of executive function, we used the Wisconsin Card Sorting Test (perseverative errors) and the Cognitive Failures Questionnaire during the pre-treatment phase. Results showed a moderate between-group effect on the main outcome measure, the Beck Anxiety Inventory (BAI) (d= .50), favouring the treatment group. Nearly half (45.5%) of that group were classified as responders. One person (3%) in the treatment group deteriorated. There were significant correlations between perseverative errors and outcome (on the BAI r = -.45), but not among self-reported cognitive function. We conclude that guided, tailored ICBT may be effective for some older adults and that the role of cognitive function needs to be investigated further.

  18. Gendered socioeconomic conditions and HIV risk behaviours ...

    African Journals Online (AJOL)

    Despite this possibility, there are surprisingly few definitive studies that examine the effects of socioeconomic status on HIV risk and prevention behaviours among youth in South Africa. Using household survey data collected in 2001, this study investigates how socioeconomic disadvantage has influenced the sexual ...

  19. Mechanical Behaviour Investigation Of Aluminium Alloy Tailor Welded Blank Developed By Using Friction Stir Welding Technique

    Science.gov (United States)

    Dwi Anggono, Agus; Sugito, Bibit; Hariyanto, Agus; Subroto; Sarjito

    2017-10-01

    The objective on the research was to investigate the mechanical properties and microstructure of tailor welded blank (TWB) made from AA6061-T6 and AA1100 using friction stir welding (FSW) process. Due to the dissimilar mechanical properties of the two aluminium alloys, microhardness test was conducted to measure the hardness distribution across the weld nugget. The mixing of two distinct materials was influenced by tool rotation speed. Therefore, microstructure analysis was carried out to investigate the grain size and shape. The grain size of AA6061-T6 has increased in the heat affected zone (HAZ) while for AA1100 has decreased. In the weld nugget, it has found a hook defects in the dissimilar aluminium joining. By using monotonic tensile load, the different weld line direction was observed with the expansion in tool rotation. The joints failure were consistently on the area of AA1100 series. Furthermore, two specimens were investigated, one through the dissimilar aluminium and the other through similiar material. Inspection of the weld nugget hardness was shown that nonhomogen material intermixing during the stiring process as confirmed by microhardness measurement.

  20. The Role of Psychosocial School Conditions in Adolescent Prosocial Behaviour

    Science.gov (United States)

    Plenty, Stephanie; Östberg, Viveca; Modin, Bitte

    2015-01-01

    This study examined how psychosocial conditions at school are associated with prosocial behaviour, a key indicator of positive mental health. Participants were 3,652 Swedish Grade 9 students from the Health Behaviour in School-aged Children study. Structural equation modelling demonstrated that students who experience more manageable school…

  1. Studies in Phebus reactor of fuel behaviour upon LOCA conditions

    International Nuclear Information System (INIS)

    Manin, A.; Del Negro, R.; Reocreux, M.

    1980-09-01

    The fuel behaviour upon LOCA conditions is studied in an in-pile loop, in Phebus reactor. This paper presents: a short description of Phebus reactor; the current program (adjusting the thermohydraulic conditions in order to get cladding failure); the program developments (consequences involved by cladding failure); the fuel test conditions determination [fr

  2. Behaviour of electrical cables under fire conditions

    International Nuclear Information System (INIS)

    Bertrand, R.; Chaussard, M.; Gonzalez, R.; Lacoue, J.; Mattei, J.M.; Such, J.M.

    2002-01-01

    A Fire Probabilistic Safety Assessment - called the Fire PSA - is being carried out by the French Institute of Radiological Protection and Nuclear Safety (IPSN) to be used in the framework of the safety assessment of operating 900 MWe PWRs. The aim of this study is to evaluate the core damage conditional probability which could result from a fire. A fire can induce unavailability of safety equipment, notably damaging electrical cables introducing a significant risk contributor. The purpose of this paper is to present the electrical cable fire tests carried out by IPSN to identify the failure modes and to determine the cable damage criteria. The impact of each kind of cable failure mode and the methodology used to estimate the conditional probability of a failure mode when cable damage occurred is also discussed. (orig.) [de

  3. 48 CFR 3046.791-2 - Tailoring warranty terms and conditions (USCG).

    Science.gov (United States)

    2010-10-01

    ... appropriately tailor the warranty on a case-by-case basis, including remedies, exclusions, limitations and... warranty certain defects for specified supplies (exclusions) and may limit the contractor's liability under... had not designed the system). (d) Contracting officers shall not include in a warranty clause any...

  4. Researches of WWER fuel rods behaviour under RIA accident conditions

    International Nuclear Information System (INIS)

    Nechaeva, O.; Medvedev, A.; Novikov, V.; Salatov, A.

    2003-01-01

    Unirradiated fuel rod and refabricated fuel rod tests in the BIGR as well as acceptance criteria proving absence of fragmentation and the settlement modeling of refabricated fuel rods thermomechanical behavior in the BIGR-tests using RAPTA-5 code are discussed in this paper. The behaviour of WWER type simulators with E110 and E635 cladding was researched at the BIGR reactor under power pulse conditions simulating reactivity initiated accident. The results of the tests in four variants of experimental conditions are submitted. The behaviour of 12 WWER type refabricated fuel rods was researched in the BIGR reactor under power pulse conditions simulating reactivity initiated accident: burnup 48 and 60 MWd/kgU, pulse width 3 ms, peak fuel enthalpy 115-190 cal/g. The program of future tests in the research reactor MIR with high burnup fuel rod (up to 70 MWd/kgU) under conditions simulating design RIA in WWER-1000 is presented

  5. Risk related behaviour under different ambient scent conditions

    Directory of Open Access Journals (Sweden)

    Alina Gagarina

    2016-09-01

    Full Text Available The article analyses the effect of two ambient scents (peppermint and vanilla and their intensiveness on risk related behaviour that is expressed through selected decision making heuristics. Purpose of the article: The purpose of this article is to identify the relationship of ambient scent type and intensiveness with risk related behaviour that is expressed through selected decision making heuristics. Methodology/methods: 2×2 factorial experiment with control group was run. Ambient scent type (vanilla vs. peppermint and intensiveness (8 (1mg vs. 16 sprays (2mg of scent concentrate in the same room were manipulated as between subject variables. Risk aversion, effect of anchoring heuristic on bidding, and affect (risk and benefit heuristics were tracked as dependent variables. Scientific aim: To identify whether ambient scent type and intensiveness have effect on risk related behaviour. Findings: Evidence suggests that there are effects of ambient scent on risk related behaviour, thus fulfilling the missing gap to relate ambient environment to decision making heuristics when risks are involved. However, not all heuristics were affected by experimental conditions. Subjects were bidding significantly higher amounts under low anchor conditions, when peppermint scent was around (if compared to vanilla group. Affect risk was perceived as lower in peppermint ambient scent conditions, if compared to the control group. Intensity of ambient scent also had influence on affect risk: subjects perceived less risk under high scent intensity conditions. Conclusions: By manipulating ambient scent, marketers may reduce or increase consumers risk perception and behaviour and as a consequence influence their purchase decisions. Marketers could use peppermint scent in high intensiveness in the situations where they want consumers to undertake higher risks (expensive purchases, gambling, insurance, since stakes were higher under peppermint ambient scent condition

  6. INPR ACPR utilization in fuel behaviour studies under accidental condition

    International Nuclear Information System (INIS)

    Negut, Gheorghe; Popov, Mircea

    1990-01-01

    This paper is dedicated to the experimental program, investigating CANDU type fuel behaviour in transient condition, as well as the facilities supporting this program. The tests Reactivity Initiated Accident type. The experiments were performed within TRIGA ACPR facility, installed at INSTITUTE for NUCLEAR POWER REACTORS, Pitesti, ROMANIA. Studies of the safety issues took a great international developement during last years. In USA, Japan, owners of the similar reactors, and USSR there are a big commitment to such programs, intended to establish the nuclear fuel behaviour under RIA-conditions. In our country, too, there are programs aiming a complete testing of the CANDU type fuels. As it is known, RIA is not a CANDU specific accident, but the fuel behaviour in such conditions can give useful informations on the fuel cladding failure threshold and about reflooding post LOCA heat transfer condition. Based on some papers and specific requirements it was initiated and developed a safety research program on CANDU type fuel using the ACPR. The paper describes the reactor,test capsule, instrumentation, fuel samples, tests, post irradiation results. (orig.)

  7. Behaviour of organic iodides under pwr accident conditions

    International Nuclear Information System (INIS)

    Alm, M.

    1982-01-01

    Laboratory experiments were performed to study the behaviour of radioactive methyl iodide under PWR loss-of-coolant conditions. The pressure relief equipment consisted of an autoclave for simulating the primary circuit and of an expansion vessel for simulating the conditions after a rupture in the reactor coolant system. After pressure relief, the composition of the CH 3 sup(127/131)I-containing steam-air mixture within the expansion vessel was analysed at 80 0 C over a period of 42 days. On the basis of the values measured and of data taken from the literature, both qualitative and quantitative assessments have been made as to the behaviour of radioactive methyl iodide in the event of loss-of-coolant accidents. (author)

  8. Initiation of health-behaviour change among employees participating in a web-based health risk assessment with tailored feedback

    NARCIS (Netherlands)

    Colkesen, Ersen B.; Niessen, Maurice A. J.; Peek, Niels; Vosbergen, Sandra; Kraaijenhagen, Roderik A.; van Kalken, Coenraad K.; Tijssen, Jan G. P.; Peters, Ron J. G.

    2011-01-01

    ABSTRACT: BACKGROUND: Primary prevention programs at the worksite can improve employee health and reduce the burden of cardiovascular disease. Programs that include a web-based health risk assessment (HRA) with tailored feedback hold the advantage of simultaneously increasing awareness of risk and

  9. Behaviour of gas cooled reactor fuel under accident conditions

    International Nuclear Information System (INIS)

    1991-11-01

    The Specialists Meeting on Behaviour of Gas Cooled Reactor Fuel under Accident Conditions was convened by the International Atomic Energy Agency on the recommendation of the International Working Group on Gas Cooled Reactors. The purpose of the meeting was to provide an international forum for the review of the development status and for the discussion on the behaviour of gas cooled reactor fuel under accident conditions and to identify areas in which additional research and development are still needed and where international co-operation would be beneficial for all involved parties. The meeting was attended by 45 participants from France, Germany, Japan, Switzerland, the Union of Soviet Socialists Republics, the United Kingdom, the United States of America, CEC and the IAEA. The meeting was subdivided into five technical sessions: Summary of Current Research and Development Programmes for Fuel; Fuel Manufacture and Quality Control; Safety Requirements; Modelling of Fission Product Release - Part I and Part II; Irradiation Testing/Operational Experience with Fuel Elements; Behaviour at Depressurization, Core Heat-up, Power Transients; Water/Steam Ingress - Part I and Part II. 22 papers were presented. A separate abstract was prepared for each of these papers. At the end of the meeting a round table discussion was held on Directions for Future R and D Work and International Co-operation. Refs, figs and tabs

  10. Culture conditions tailored to the cell of origin are critical for maintaining native properties and tumorigenicity of glioma cells.

    Science.gov (United States)

    Ledur, Pítia F; Liu, Chong; He, Hua; Harris, Alexandra R; Minussi, Darlan C; Zhou, Hai-Yan; Shaffrey, Mark E; Asthagiri, Ashok; Lopes, Maria Beatriz S; Schiff, David; Lu, Yi-Cheng; Mandell, James W; Lenz, Guido; Zong, Hui

    2016-10-01

    Cell culture plays a pivotal role in cancer research. However, culture-induced changes in biological properties of tumor cells profoundly affect research reproducibility and translational potential. Establishing culture conditions tailored to the cancer cell of origin could resolve this problem. For glioma research, it has been previously shown that replacing serum with defined growth factors for neural stem cells (NSCs) greatly improved the retention of gene expression profile and tumorigenicity. However, among all molecular subtypes of glioma, our laboratory and others have previously shown that the oligodendrocyte precursor cell (OPC) rather than the NSC serves as the cell of origin for the proneural subtype, raising questions regarding the suitability of NSC-tailored media for culturing proneural glioma cells. OPC-originated mouse glioma cells were cultured in conditions for normal OPCs or NSCs, respectively, for multiple passages. Gene expression profiles, morphologies, tumorigenicity, and drug responsiveness of cultured cells were examined in comparison with freshly isolated tumor cells. OPC media-cultured glioma cells maintained tumorigenicity, gene expression profiles, and morphologies similar to freshly isolated tumor cells. In contrast, NSC-media cultured glioma cells gradually lost their OPC features and most tumor-initiating ability and acquired heightened sensitivity to temozolomide. To improve experimental reproducibility and translational potential of glioma research, it is important to identify the cell of origin, and subsequently apply this knowledge to establish culture conditions that allow the retention of native properties of tumor cells. © The Author(s) 2016. Published by Oxford University Press on behalf of the Society for Neuro-Oncology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  11. Individually tailored internet-based cognitive behavioural therapy for young adults with anxiety disorders: A pilot effectiveness study

    Directory of Open Access Journals (Sweden)

    Kristin Silfvernagel

    2017-06-01

    Full Text Available The mental health of young people is decreasing. It is therefore important to develop early interventions for young people with mental health problems. One previous randomized controlled trial on tailored Internet-based treatment for young adults with minimal therapist guidance has shown promising results for anxiety symptoms. The purpose of this study was to investigate the effects of tailored internet-administered CBT for young adults (16–25 years old with anxiety, depression and possible comorbidity in regular care. Participants were recruited from a youth health care centre (n = 15. Screening consisted of online questionnaires followed by a semi-structured interview. A total of 10 participants completed pre and post measurement. The treatment consisted of individually prescribed CBT text modules with online therapist guidance. All dependent measures improved significantly immediately following treatment and the within-group effect based on pre- to post measurement on the primary outcome measure, the Beck Anxiety Inventory, was d = 1.50, the within-group effect on the secondary outcome measures, Montgomery Åsberg Depression Rating Scale-Self-Rated, Clinical Outcomes in Routine Evaluation and Quality of Life Inventory showed large improvement. Tailored internet-based treatment can be an approach in the treatment of anxiety symptoms and comorbid depressive symptoms in youth care.

  12. Individually tailored internet-based cognitive behavioural therapy for adolescents, young adults and older adults with anxiety

    OpenAIRE

    Silfvernagel, Kristin

    2017-01-01

    Anxiety disorders share the feature of excessive fear, anxiety and related behavioural disturbances. Fear is defined as the emotional response to a real or a perceived imminent threat and anxiety is the anticipation of a future threat. The anxiety disorders covered in this thesis are panic disorder with or without agoraphobia, social phobia, post-traumatic stress disorder, generalized anxiety disorder and anxiety disorder not otherwise specified. Cognitive behavioural treatment protocols are ...

  13. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake

    OpenAIRE

    Elbert, Sarah P.; Dijkstra, Arie; Rozema, Andrea

    2017-01-01

    Objective: Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating effect of self-efficacy was assessed.Design: The between-participants design consisted of four conditions. A generic health message served as a control condition; personalisation was applied using the r...

  14. Connecting Health and Technology (CHAT): protocol of a randomized controlled trial to improve nutrition behaviours using mobile devices and tailored text messaging in young adults

    Science.gov (United States)

    2012-01-01

    Background Increasing intakes of fruits and vegetables intake, in tandem with reducing consumption of energy-dense and nutrient poor foods and beverages are dietary priorities to prevent chronic disease. Although most adults do not eat enough fruit and vegetables, teenagers and young adults tend to have the lowest intakes. Young adults typically consume a diet which is inconsistent with the dietary recommendations. Yet little is known about the best approaches to improve dietary intakes and behaviours among this group. This randomised controlled trial aims to evaluate the effectiveness of using a mobile device to assess dietary intake, provide tailored dietary feedback and text messages to motivate changes in fruit, vegetable and junk food consumption among young adults. Methods/design The CHAT project will involve the development of the mobile device food record (MDFR), and evaluation of dietary feedback and implementation of a 6-month intervention in young adults aged 18 to 30 years. The participants will be randomly assigned to one of three groups (1) Intervention Group 1: MDFR + Text Messages + Dietary Feedback; (2) Intervention Group 2: MDFR + Dietary Feedback; (3) Control Group 3: MDFR, no feedback. All groups will undertake a 3-day dietary record using the MDFR but only the Intervention Groups 1 and 2 will receive tailored dietary feedback at baseline and at 6-months which will consist of assessment of serves of fruits, vegetables and junk food in comparison to dietary recommendations. Tailored nutrition text messages will be sent to Intervention Group 1 over the 6 months. Data will be collected at baseline and again at the 6-month completion. Discussion This trial will test if applications running on mobile devices have potential to assess diet, provide tailored feedback and nutrition messages as an effective way of improving fruit and vegetable consumption and reducing energy-dense nutrient poor foods in young adults. The CHAT project will assess the

  15. Connecting Health and Technology (CHAT): protocol of a randomized controlled trial to improve nutrition behaviours using mobile devices and tailored text messaging in young adults.

    Science.gov (United States)

    Kerr, Deborah A; Pollard, Christina M; Howat, Peter; Delp, Edward J; Pickering, Mark; Kerr, Katherine R; Dhaliwal, Satvinder S; Pratt, Iain S; Wright, Janine; Boushey, Carol J

    2012-06-22

    Increasing intakes of fruits and vegetables intake, in tandem with reducing consumption of energy-dense and nutrient poor foods and beverages are dietary priorities to prevent chronic disease. Although most adults do not eat enough fruit and vegetables, teenagers and young adults tend to have the lowest intakes. Young adults typically consume a diet which is inconsistent with the dietary recommendations. Yet little is known about the best approaches to improve dietary intakes and behaviours among this group. This randomised controlled trial aims to evaluate the effectiveness of using a mobile device to assess dietary intake, provide tailored dietary feedback and text messages to motivate changes in fruit, vegetable and junk food consumption among young adults. The CHAT project will involve the development of the mobile device food record (MDFR), and evaluation of dietary feedback and implementation of a 6-month intervention in young adults aged 18 to 30 years. The participants will be randomly assigned to one of three groups (1) Intervention Group 1: MDFR + Text Messages + Dietary Feedback; (2) Intervention Group 2: MDFR + Dietary Feedback; (3) Control Group 3: MDFR, no feedback. All groups will undertake a 3-day dietary record using the MDFR but only the Intervention Groups 1 and 2 will receive tailored dietary feedback at baseline and at 6-months which will consist of assessment of serves of fruits, vegetables and junk food in comparison to dietary recommendations. Tailored nutrition text messages will be sent to Intervention Group 1 over the 6 months. Data will be collected at baseline and again at the 6-month completion. This trial will test if applications running on mobile devices have potential to assess diet, provide tailored feedback and nutrition messages as an effective way of improving fruit and vegetable consumption and reducing energy-dense nutrient poor foods in young adults. The CHAT project will assess the impact of the intervention on behavioural

  16. Connecting Health and Technology (CHAT: protocol of a randomized controlled trial to improve nutrition behaviours using mobile devices and tailored text messaging in young adults

    Directory of Open Access Journals (Sweden)

    Kerr Deborah A

    2012-06-01

    Full Text Available Abstract Background Increasing intakes of fruits and vegetables intake, in tandem with reducing consumption of energy-dense and nutrient poor foods and beverages are dietary priorities to prevent chronic disease. Although most adults do not eat enough fruit and vegetables, teenagers and young adults tend to have the lowest intakes. Young adults typically consume a diet which is inconsistent with the dietary recommendations. Yet little is known about the best approaches to improve dietary intakes and behaviours among this group. This randomised controlled trial aims to evaluate the effectiveness of using a mobile device to assess dietary intake, provide tailored dietary feedback and text messages to motivate changes in fruit, vegetable and junk food consumption among young adults. Methods/design The CHAT project will involve the development of the mobile device food record (MDFR, and evaluation of dietary feedback and implementation of a 6-month intervention in young adults aged 18 to 30 years. The participants will be randomly assigned to one of three groups (1 Intervention Group 1: MDFR + Text Messages + Dietary Feedback; (2 Intervention Group 2: MDFR + Dietary Feedback; (3 Control Group 3: MDFR, no feedback. All groups will undertake a 3-day dietary record using the MDFR but only the Intervention Groups 1 and 2 will receive tailored dietary feedback at baseline and at 6-months which will consist of assessment of serves of fruits, vegetables and junk food in comparison to dietary recommendations. Tailored nutrition text messages will be sent to Intervention Group 1 over the 6 months. Data will be collected at baseline and again at the 6-month completion. Discussion This trial will test if applications running on mobile devices have potential to assess diet, provide tailored feedback and nutrition messages as an effective way of improving fruit and vegetable consumption and reducing energy-dense nutrient poor foods in young adults. The CHAT

  17. Behaviour of molten reactor fuels under accident conditions

    International Nuclear Information System (INIS)

    Xavier Swamikannu, A.; Mathews, C.K.

    1980-01-01

    The behaviour of molten reactor fuels under accident conditions has received considerable importance in recent times. The chemical processes that occur in the molten state among the fuel, the clad components and the concrete of the containment building under the conditions of a core melt down accident in oxide fuelled reactors have been reviewed with the purpose of identifying areas of developmental work required to be performed to assess and minimize the consequences of such an accident. This includes the computation and estimation of vapour pressure of various gaseous species over the fuel, the clad and the coolant, providing of sacrificial materials in the concrete in order to protect the containment building in order to prevent release of radioactive gases into the atmosphere and understanding the distribution and chemical state of fission products in the molten fuel in order to provide for the effective removal of their decay heats. (auth.)

  18. Behaviour of concrete containment under over-pressure conditions

    International Nuclear Information System (INIS)

    Atchison, R.J.; Asmis, G.J.K.; Campbell, F.R.

    1979-01-01

    The Atomic Energy Control Board of Canada initiated June, 1975, a major study of the behaviour of concrete containment under over-pressure conditions. Although extensive theoretical and experimental work has been carried out for thick-walled Prestressed Concrete Reactor Vessels (PCRV's), there is a want of information on the non-linear response of thin-walled structures typical of the CANDU, 600 MW(e) cylindrical/spherical, post-tensioned containment shells. The purpose of this paper is to provide an overview of the total program, to present the reasons behind the research contract, and the specification and implementation of the work. The results of the theoretical and experimental work and their implications with respect to Canadian Concrete Containment practice are discussed. This study is unique, and, as far as is known, has no world-wide precedence. (orig.)

  19. Feeding Behaviour of Cynopterus sphinx (Pteropodidae) Under Captive Conditions.

    Science.gov (United States)

    Shafie, Nur Juliani; Rahman, Nor Amira; Sah, Shahrul Anuar Mohd; Rosely, Nik Fadzly Nik; Sufian, Maryam

    2014-12-01

    We examined the olfactory and visual abilities of megachiropteran bats, Cynopterus sphinx, for discrimination of the odour and shape of the banana fruit, Musa sp. We conducted the experiments in captive conditions by offering a selection of ripe bananas, blended bananas and artificial bananas. The behaviour of the bats was observed visually, and the percentage of activity and rest, duration of the first foraging bout, number of feeding attempts and the average duration of successful attempts was recorded for each bat. The bats exhibited an increased number of visits to ripe bananas and blended banana fruits. However, the artificial fruit did not evoke any response. Our study suggests that odour cues are more important than visual cues for the location of fruits by C. sphinx.

  20. Testing a Dutch web-based tailored lifestyle programme among adults: a study protocol

    Directory of Open Access Journals (Sweden)

    van Osch Liesbeth ADM

    2011-02-01

    Full Text Available Abstract Background Smoking, high alcohol consumption, unhealthy eating habits and physical inactivity often lead to (chronic diseases, such as cardiovascular diseases and cancer. Tailored online interventions have been proven to be effective in changing health behaviours. The aim of this study is to test and compare the effectiveness of two different tailoring strategies for changing lifestyle compared to a control group using a multiple health behaviour web-based approach. Methods In our Internet-based tailored programme, the five lifestyle behaviours of smoking, alcohol intake, fruit consumption, vegetable consumption, and physical activity are addressed. This randomized controlled trial, conducted among Dutch adults, includes two experimental groups (i.e., a sequential behaviour tailoring condition and a simultaneous behaviour tailoring condition and a control group. People in the sequential behaviour tailoring condition obtain feedback on whether their lifestyle behaviours meet the Dutch recommendations. Using a step-by-step approach, they are stimulated to continue with a computer tailored module to change only one unhealthy behaviour first. In the course of the study, they can proceed to change a second behaviour. People in the simultaneous behaviour tailoring condition receive computer tailored feedback about all their unhealthy behaviours during their first visit as a stimulation to change all unhealthy behaviours. The experimental groups can re-visit the website and can then receive ipsative feedback (i.e., current scores are compared to previous scores in order to give feedback about potential changes. The (difference in effectiveness of the different versions of the programme will be tested and compared to a control group, in which respondents only receive a short health risk appraisal. Programme evaluations will assess satisfaction with and appreciation and personal relevance of the intervention among the respondents. Finally

  1. Revisiting the impact of macroeconomic conditions on health behaviours.

    Science.gov (United States)

    Di Pietro, Giorgio

    2018-02-01

    This paper estimates the average population effect of macroeconomic conditions on health behaviours accounting for the heterogeneous impact of the business cycle on individuals. While previous studies use models relying on area-specific unemployment rates to estimate this average effect, this paper employs a model based on area-specific unemployment rates by gender and age group. The rationale for breaking down unemployment rates is that the severity of cyclical upturns and downturns does not only significantly vary across geographical areas, but also across gender and age. The empirical analysis uses microdata from the Italian Multipurpose Household Survey on Everyday Life Issues. The estimates suggest that models employing aggregated and disaggregated unemployment rate measures as a proxy for the business cycle produce similar findings for some health behaviours (such as smoking), whereas different results are obtained for others. While using unemployment rates by gender and age group, fruits and/or vegetables consumption turns out to be procyclical (a 1pp increase in this unemployment rate decreases the probability of consuming at least five daily fruit and/or vegetable servings by 0.0016pp), the opposite effect, though statistically insignificant, is observed once general unemployment rates are used. While both models conclude that physical activity declines during economic downturns, the size of the procyclical effect is much smaller when employing disaggregated rather than aggregated unemployment rates (a 1pp increase in the unemployment rate by gender and age group decreases the probability of doing any physical activity by 0.0017pp). Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Allogeneic Stem Cell Transplantation in Congenital Hemoglobinopathies Using a Tailored Busulfan-Based Conditioning Regimen: Single-Center Experience.

    Science.gov (United States)

    Zaidman, Irina; Rowe, Jacob M; Khalil, Abdalla; Ben-Arush, Myriam; Elhasid, Ronit

    2016-06-01

    Hematopoietic stem cell transplantation (HSCT) is the only proven curative option for patients with hemoglobinopathies, both thalassemia and sickle cell anemia (SCA). A busulfan-based myeloablative conditioning regimen is the standard of care for HSCT in these patients, although increased treatment-related morbidity, including veno-occlusive disease (VOD), has been demonstrated. Thirty-eight pediatric patients, median age 8 years (range, 6 months to 22 years), suffering from hemoglobinopathy were treated at Rambam Medical Center in Haifa, Israel, between 1998 and 2011. Thirty-four patients had thalassemia major and 4 had SCA. The 38 patients underwent 40 HSCTs, 34 of which were first transplants and 6 second transplants. Most transplants (32/40) were from matched sibling donors. Sources of stem cells were peripheral blood in 30 transplants, bone marrow in 7 transplants, and cord blood in 3 transplants. All received different customized busulfan-based conditioning regimens tailored by pharmacokinetic analysis of busulfan levels. Primary engraftment occurred in 37 of 40 transplants. Neutrophil engraftment (>.5 × 10(9)/L) occurred at a median of 15.3 days post-transplantation (range, 10 to 45). Platelet transfusion independence (>20 × 10(9)/L) occurred at a median of 22.3 days (range, 11 to 60). The rate of 5-year overall survival for thalassemia patients after first transplantation was 90.5% ± 5.3%. The rate of 5-year thalassemia-free survival was 81.7% ± 6.8%. Cumulative incidence of acute graft-versus-host disease (GVHD) was 17.6%. Rate of grades III to IV GVHD was 8.8%. Cumulative incidence of chronic GVHD was 23.5%, with 11.8% incidence of extensive chronic GVHD. One patient developed VOD. Full donor chimerism occurred in 36.4% of patients with class 1 + 2 thalassemia, compared with 78.6% in class 3 thalassemia (P = .049). Overall survival above 90% in patients undergoing their first transplant was demonstrated using busulfan

  3. Thermal shock behaviour of different tungsten grades under varying conditions

    Energy Technology Data Exchange (ETDEWEB)

    Wirtz, Oliver Marius

    2012-07-19

    Thermonuclear fusion power plants are a promising option to ensure the energy supply for future generations, but in many fields of research enormous challenges have to be faced. A major step on the way to the prototype fusion reactor DEMO will be ITER which is build in Cadarache, southern France. One of the most critical issues is the field of in-vessel materials and components, in particular the plasma facing materials (PFM). PFMs that will be used in a device like ITER have to withstand severe environmental conditions in terms of steady state and transient thermal loads as well as high particle fluxes such as hydrogen, helium and neutrons. Candidate wall materials are beryllium, tungsten and carbon based materials like CFC (carbon fibre composite). Tungsten is the most promising material for an application in the divertor region with very severe loading conditions and it will most probably also be used as PFM for DEMO. Hence, this work focuses on the investigation of the thermal shock response of different tungsten grades in order to understand the damage mechanisms and to identify material parameters which influence this behaviour under ITER and DEMO relevant operation conditions. Therefore the microstructure and the mechanical and thermal properties of five industrially manufactured tungsten grades were characterised. All five tungsten grades were exposed to transient thermal events with very high power densities of up to 1.27 GWm{sup -2} at varying base temperatures between RT and 600 C in the electron beam device JUDITH 1. The pulse numbers were limited to a maximum of 1000 in order to avoid immoderate workload on the test facility and to have enough time to cover a wide range of loading conditions. The results of this damage mapping enable to define different damage and cracking thresholds for the investigated tungsten grades and to identify certain material parameters which influence the location of these thresholds and the distinction of the induced

  4. Thermal shock behaviour of different tungsten grades under varying conditions

    International Nuclear Information System (INIS)

    Wirtz, Oliver Marius

    2012-01-01

    Thermonuclear fusion power plants are a promising option to ensure the energy supply for future generations, but in many fields of research enormous challenges have to be faced. A major step on the way to the prototype fusion reactor DEMO will be ITER which is build in Cadarache, southern France. One of the most critical issues is the field of in-vessel materials and components, in particular the plasma facing materials (PFM). PFMs that will be used in a device like ITER have to withstand severe environmental conditions in terms of steady state and transient thermal loads as well as high particle fluxes such as hydrogen, helium and neutrons. Candidate wall materials are beryllium, tungsten and carbon based materials like CFC (carbon fibre composite). Tungsten is the most promising material for an application in the divertor region with very severe loading conditions and it will most probably also be used as PFM for DEMO. Hence, this work focuses on the investigation of the thermal shock response of different tungsten grades in order to understand the damage mechanisms and to identify material parameters which influence this behaviour under ITER and DEMO relevant operation conditions. Therefore the microstructure and the mechanical and thermal properties of five industrially manufactured tungsten grades were characterised. All five tungsten grades were exposed to transient thermal events with very high power densities of up to 1.27 GWm -2 at varying base temperatures between RT and 600 C in the electron beam device JUDITH 1. The pulse numbers were limited to a maximum of 1000 in order to avoid immoderate workload on the test facility and to have enough time to cover a wide range of loading conditions. The results of this damage mapping enable to define different damage and cracking thresholds for the investigated tungsten grades and to identify certain material parameters which influence the location of these thresholds and the distinction of the induced damages

  5. Modelling spent fuel and HLW behaviour in repository conditions

    Energy Technology Data Exchange (ETDEWEB)

    Esparza, A M; Esteban, J A

    2003-07-01

    The aim of this report is to give the reader an overall insight of the different models, which are used to predict the long-term behaviour of the spent fuels and HLW disposed in a repository. The models must be established on basic data and robust kinetics describing the mechanisms controlling spent fuel alteration/dissolution in a repository. The UO2 matrix, or source term, contains embedded in it the , majority of radionuclides of the spent fuel (some are in the gap cladding). For this reason the SF radionuclides release models play a significant role in the performance assessment of radioactive waste disposal. The differences existing between models published in the literature are due to the conceptual understanding of the processes and the degree of the conservatism used with the parameter values, and the boundary conditions. They mainly differ in their level of simplification and their final objective. Sometimes are focused the show compliance with regulatory requirements, other to support decision making, to increase the level of confidence of public and scientific community, could be empirical, semi-empirical or analytical. The models take into account the experimental results from radionuclides releases and their extrapolation to the very long term. Its necessary a great statistics for have a representative dissolution rate, due at the number of experimental results is not very high and many of them show a great scatter, independently of theirs different compositions by axial and radial variations, due to linear power or local burnup. On the other hand, it is difficult to predict the spent fuel behaviour over the long term, based in short term experiments. In this report is given a little description of the radionuclides distribution in the spent fuel and also in the cladding/pellet gap, grain boundary, cracks and rim zones (the matrix rim zone can be considered with an especial characteristics very different to the rest of the spent fuel), and structural

  6. Modelling spent fuel and HLW behaviour in repository conditions

    International Nuclear Information System (INIS)

    Esparza, A. M.; Esteban, J. A.

    2003-01-01

    The aim of this report is to give the reader an overall insight of the different models, which are used to predict the long-term behaviour of the spent fuels and HLW disposed in a repository. The models must be established on basic data and robust kinetics describing the mechanisms controlling spent fuel alteration/dissolution in a repository. The UO2 matrix, or source term, contains embedded in it the , majority of radionuclides of the spent fuel (some are in the gap cladding). For this reason the SF radionuclides release models play a significant role in the performance assessment of radioactive waste disposal. The differences existing between models published in the literature are due to the conceptual understanding of the processes and the degree of the conservatism used with the parameter values, and the boundary conditions. They mainly differ in their level of simplification and their final objective. Sometimes are focused the show compliance with regulatory requirements, other to support decision making, to increase the level of confidence of public and scientific community, could be empirical, semi-empirical or analytical. The models take into account the experimental results from radionuclides releases and their extrapolation to the very long term. Its necessary a great statistics for have a representative dissolution rate, due at the number of experimental results is not very high and many of them show a great scatter, independently of theirs different compositions by axial and radial variations, due to linear power or local burnup. On the other hand, it is difficult to predict the spent fuel behaviour over the long term, based in short term experiments. In this report is given a little description of the radionuclides distribution in the spent fuel and also in the cladding/pellet gap, grain boundary, cracks and rim zones (the matrix rim zone can be considered with an especial characteristics very different to the rest of the spent fuel), and structural

  7. Risk related behaviour under different ambient scent conditions

    OpenAIRE

    Alina Gagarina; Indre Pikturniene

    2016-01-01

    The article analyses the effect of two ambient scents (peppermint and vanilla) and their intensiveness on risk related behaviour that is expressed through selected decision making heuristics. Purpose of the article: The purpose of this article is to identify the relationship of ambient scent type and intensiveness with risk related behaviour that is expressed through selected decision making heuristics. Methodology/methods: 2×2 factorial experiment with control group was run. Ambi...

  8. Individual coping characteristics, rearing conditions and behavioural flexibility in pigs

    NARCIS (Netherlands)

    Bolhuis, J.E.; Schouten, W.G.P.; Leeuw, de J.A.; Schrama, J.W.; Wiegant, V.M.

    2004-01-01

    Several studies suggest that classification of piglets early in life based on the degree of resistance they display in a so-called Backtest may be indicative of their coping style at a later age. In the present study behavioural flexibility was investigated in pigs diverging for Backtest response

  9. Pavlovian conditioning of psychomotor stimulant-induced behaviours: has convenience led us astray?

    Science.gov (United States)

    Martin-Iverson, M.T.; Fawcett, S.L.

    1996-01-01

    In order to classically condition the behavioural effects of psychomotor stimulants within a test context, rats were treated for 10 days with (+)-amphetamine (1.5mg/kg), (+)-4-propyl-9-hydroxynaphthoxazine (PHNO, 30µg/kg) or vehicle prior to a 1h placement into a test box. Conditioned behavioural effects were then measured in the previously drug-paired context after a vehicle injection (drug-free test day). Each rat was videotaped for the 1h test box exposure on days 1, 4, 7 and 10 of the drug conditioning trials, and on the drug-free test day. Eleven of 28 behaviours that were scored for frequency, duration and mean bout duration (bout length) were significantly influenced by at least one of the two drugs. Amphetamine predominantly increased bout lengths while PHNO predominantly increased bout frequency. Only two measures that were influenced by the drugs exhibited clear increases over controls in a manner consistent with a classical conditioning interpretation. Behavioural sensitization clearly occurred to some of the effects of amphetamine and PHNO, but these were not the same effects as those increased on the non-drug day testing for classical conditioning. Most behavioural effects of amphetamine and PHNO are not classically conditioned, and behavioural sensitization to these drugs, while perhaps context-specific, is not due to classical conditioning. Automated measures of behaviours have provided misleading evidence concerning the similarity among behavioural effects of stimulants, sensitization and effects of exposure to an environment previously paired with stimulants. Analysis of transitions between behaviours does not support the view that stimulants increase switching or response competition, or that behavioural reorganization is responsible for sensitization. Rather, it is suggested that stimulants selectively facilitate current stimulus-guided behaviours.

  10. Tailored online cognitive behavioural therapy with or without therapist support calls to target psychological distress in adults receiving haemodialysis: A feasibility randomised controlled trial.

    Science.gov (United States)

    Hudson, Joanna L; Moss-Morris, Rona; Norton, Sam; Picariello, Federica; Game, David; Carroll, Amy; Spencer, Jonathan; McCrone, Paul; Hotopf, Matthew; Yardley, Lucy; Chilcot, Joseph

    2017-11-01

    Psychological distress is prevalent in haemodialysis (HD) patients yet access to psychotherapy remains limited. This study assessed the feasibility and acceptability of online cognitive-behavioural therapy (CBT) tailored for HD patients, with or without therapist support, for managing psychological distress. This feasibility randomised controlled trial recruited patients from a UK HD centre. Following psychological distress screens, patients with mild-moderate psychological distress (Patient Health Questionnaire PHQ-9; score: 5-19 and/or Generalised Anxiety Disorder; GAD-7 score: 5-14) who met remaining inclusion criteria were approached for consent. Consenters were individually randomised (1:1) to online-CBT or online-CBT plus three therapist support calls. Outcomes included recruitment, retention, and adherence rates. Exploratory change analyses were performed for: psychological distress, quality of life (QoL), illness perceptions, and costs. The statistician was blinded to allocation. 182 (44%) out of 410 patients approached completed psychological distress screens. 26% found screening unacceptable; a further 30% found it unfeasible. Psychological distress was detected in 101 (55%) patients, 60 of these met remaining inclusion criteria. The primary reason for ineligibility was poor computer literacy (N=17, 53%). Twenty-five patients were randomised to the supported (N=18) or unsupported arm (N=7); 92% were retained at follow-up. No differences in psychological distress or cost-effectiveness were observed. No trial adverse events occurred. Online CBT appears feasible but only for computer literate patients who identify with the label psychological distress. A definitive trial using the current methods for psychological distress screening and online care delivery is unfeasible. ClinicalTrials.gov Identifier: NCT02352870. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Positive and Negative Effects of Parental Conflicts on Children’s Condition and Behaviour

    OpenAIRE

    Joëlle Barthassat

    2014-01-01

    Previous research focused on the negative consequences of parental conflict behaviours. In contrast, this review is about the positive and negative effects that constructive and destructive parental conflict behaviours have on a child’s condition and behaviour. It employs the cognitive-contextual framework of Grych and Fincham (1990) and the emotional security hypothesis of Davies and Cummings (1994). Parental conflicts are represented as a continuum from very destructive to very constructive...

  12. 'BeSAFE', effect-evaluation of internet-based, tailored safety information combined with personal counselling on parents' child safety behaviours: study design of a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    van Beeck Eduard F

    2010-08-01

    Full Text Available Abstract Background Injuries in or around the home are the most important cause of death among children aged 0-4 years old. It is also a major source of morbidity and loss of quality of life. In order to reduce the number of injuries, the Consumer Safety Institute introduced the use of Safety Information Leaflets in the Netherlands to provide safety education to parents of children aged 0-4 years. Despite current safety education, necessary safety behaviours are still not taken by a large number of parents, causing unnecessary risk of injury among young children. In an earlier study an E-health module with internet-based, tailored safety information was developed and applied. It concerns an advice for parents on safety behaviours in their homes regarding their child. The aim of this study is to evaluate the effect of this safety information combined with personal counselling on parents' child safety behaviours. Methods/Design Parents who are eligible for the regular well-child visit with their child at child age 5-8 months are invited to participate in this study. Participating parents are randomized into one of two groups: 1 internet-based, tailored safety information combined with personal counselling (intervention group, or 2 personal counselling using the Safety Information Leaflets of the Consumer Safety Institute in the Netherlands for children aged 12 to 24 months (control group. All parents receive safety information on safety topics regarding the prevention of falling, poisoning, drowning and burning. Parents of the intervention group will access the internet-based, tailored safety information module when their child is approximately 10 months old. After completion of the assessment questions, the program compiles a tailored safety advice. The parents are asked to devise and inscribe a personal implementation intention. During the next well-child visit, the Child Health Clinic professional will discuss this tailored safety information

  13. The Extreme Male Brain Theory and Gender Role Behaviour in Persons with an Autism Spectrum Condition

    Science.gov (United States)

    Stauder, J. E. A.; Cornet, L. J. M.; Ponds, R. W. H. M.

    2011-01-01

    According to the Extreme Male Brain theory persons with autism possess masculinised cognitive traits. In this study masculinisation of gender role behaviour is evaluated in 25 persons with an autism spectrum condition (ASC) and matched controls with gender role behaviour as part of a shortened version of the Minnesota Multiphasic Personality…

  14. The electrical behaviour of an excitable cell at different conditions

    International Nuclear Information System (INIS)

    El-Sayed, M.; Mohammed, A.M.

    1994-08-01

    The Hodgkin-Huxley, H-H, model has been modified, in this work, to study the electrical behaviour of an excitable cell due to changes in the permeability of K and Na ions (g k and g Na ), the simultaneous stochastic variations of g k and g Na , the current stimulus (Jstim) and the non-inactivation of Na-channel (NI - NaC). The amplitude and duration of the generated action potential (AP) was found to increase as g k increases, with the appearance of repetitive AP spikes in the range of 21.5 ≥ g k ≥ 3.5 while the K- and Na-currents (J k and J Na ) showed a pronounced decrease. On the other hand, the increase of g Na was accompanied by an increase in AP amplitudes and durations and also in J k and J Na with the appearance of a repetitive AP at 1400 ≥ g Na ≥ 189 ms/cm 2 whose frequency increases with the increase of g Na . Moreover, the stochastic variations in g k and g Na could generate a repetitive AP whose frequency could be changed either by changing the values of g k or g Na or both, and may represent an information carried by the sensory cells for example. The electrical behaviour of the simulated cell can also be affected by Jstim at different values of g k except at the range of 21.5 ≥ g k ≥ 3.5 ms/cm 2 and also depended on NI - NaC fraction. (author). 11 refs, 9 figs, 4 tabs

  15. Positive and Negative Effects of Parental Conflicts on Children’s Condition and Behaviour

    Directory of Open Access Journals (Sweden)

    Joëlle Barthassat

    2014-01-01

    Full Text Available Previous research focused on the negative consequences of parental conflict behaviours. In contrast, this review is about the positive and negative effects that constructive and destructive parental conflict behaviours have on a child’s condition and behaviour. It employs the cognitive-contextual framework of Grych and Fincham (1990 and the emotional security hypothesis of Davies and Cummings (1994. Parental conflicts are represented as a continuum from very destructive to very constructive behaviours. Depending on the style of parental conflict behaviour, children’s emotional reactions and behaviour vary from positive to negative, and are moderated or mediated by different variables. A replication of previous findings and additional research are needed for a comprehensive understanding of this relationship and of the underlying mechanisms.

  16. Monitoring fate and behaviour of Nanoceria under relevant environmental conditions

    CSIR Research Space (South Africa)

    Tancu, Y

    2014-11-01

    Full Text Available ). The results revealed significant tendency of nCeO¬2 to undergo aggregation, agglomeration and certain degree of deagglomeration processes under different environmental conditions. Moreover, the findings suggested that both electrostatic and steric interactions...

  17. The behaviour of spherical HTR fuel elements under accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Schenk, W; Naoumidis, A [Institute for Reactor Material, KFA Juelich (Germany)

    1985-07-01

    Hypothetical accidents may lead to significantly higher temperatures in HTR fuel than during normal operation. In order to obtain meaningful statements on fission product behaviour and release, irradiated spherical fuel elements containing a large number of coated particles (20,000-40,000) with burnups between 6 and 16% FIMA were heated at temperatures between 1400 and 2500 deg. C. HTI-pyrocarbon coating retains the gaseous fission products (e.g. Kr) very well up to about 2400 deg. C if the burnup does not exceed the specified value for THTR (11.5%). Cs diffuses through the pyrocarbon significantly faster than Kr and the diffusion is enhanced at higher fuel burnups because of irradiation induced kernel microstructure changes. Below about 1800 deg. C the Cs release rate is controlled by diffusion in the fuel kernel; above this temperature the diffusion in the pyrocarbon coating is the controlling parameter. An additional SiC coating interlayer (TRISO) ensures Cs retention up to 1600 deg. C. However, the release obtained in the examined fuel elements was only by a factor of three lower than through the HTI pyrocarbon. Solid fission products added to UO{sub 2}-TRISO particles to simulate high burnup behave in various ways and migrate to attack the SiC coating. Pd migrates fastest and changes the SiC microstructure making it permeable.

  18. Ruthenium behaviour in severe nuclear accident conditions - Progress report

    International Nuclear Information System (INIS)

    Backman, U.; Lipponen, M.; Zilliacus, R.; Auvinen, A.; Jokiniemi, J.

    2004-03-01

    In order to prevent the radioactive ruthenium from spreading in gaseous form in case of an accident in a nuclear power plant it is of interest to know how it is formed and how it behaves. In the experiments the behaviour of ruthenium in oxidising atmosphere at high temperatures is studied. The methods for trapping and analysing RuO4 has been studied. It was found that 1M NaOH is capable of trapping RuO4 totally. The determination of Ru from the solution can be made using ICP-MS (inductively coupled plasma mass spectrometry) and from the reduced precipitates on filters by INAA (instrumental neutron activation analysis). The results of the experiments carried out so far is reported. A significant difference in the decomposition rate of gaseous RuO4 depending on the tube material was found. In all experiments only a minor fraction of Ru remained in gaseous form until the bubbler. In order to achieve a better mass balance an experiment using radioactive tracer was carried out. In the decomposition of gaseous Ru needle-shaped RuO2 crystallites were formed. (au)

  19. Behaviour change and social blinkers? The role of sociology in trials of self-management behaviour in chronic conditions.

    Science.gov (United States)

    Ong, Bie Nio; Rogers, Anne; Kennedy, Anne; Bower, Peter; Sanders, Tom; Morden, Andrew; Cheraghi-Sohi, Sudeh; Richardson, Jane C; Stevenson, Fiona

    2014-02-01

    Individual-focused self-management interventions are one response to both an ageing society and the purported increase in chronic conditions. They tend to draw on psychological theories in self-management interventions, but over-reliance on these theories can reinforce a narrow focus on specified attitudinal and behavioural processes, omitting aspects of living with a chronic condition. While advances have been made in health behaviour change theory and practice, scant attention has been paid to the social, with the question of social context remaining under-theorised and under-explored empirically. This is particularly noticeable in trials of behaviour change interventions for self-management. The common sociological critique is that these ignore context and thus no explanation can be given as to why, for whom and under what circumstances a treatment works. Conversely, sociologists are criticised for offering no positive suggestions as to how context can be taken into account and for over-emphasising context with the risk of inhibiting innovation. This article provides an overview of these issues and provides examples of how context can be incorporated into the rigid method of trials of self-management for chronic conditions. We discuss modifications to both trial interventions and design that make constructive use of the concept of context. © 2014 The Authors. Sociology of Health & Illness © 2014 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

  20. Behaviour of French electrical cables under fire conditions

    Energy Technology Data Exchange (ETDEWEB)

    Bertrand, R.; Chaussard, M.; Gonzalez, R.; Lacoue, J.; Mattei, J.M.; Such, J.M

    2001-12-01

    A fire Probabilistic Safety Assessment - called fire PSA - is being carried out by the French Institute of Nuclear Safety and Protection (IPSN) to be used in the framework of the safety assessment of operating 900 MWe PWRs. The aim of this study is to evaluate the core damage conditional probability which could result from a fire. A fire can induce unavailability of safety equipment notably damaging electrical cables that are a significant risk contributor. The purpose of this communication is to present the electrical cable fire tests carried out by IPSN to identify the failure modes and to determine the cable damage criteria. Moreover, are indicated the impact of each kind of cable failure mode and the methodology used to estimate the conditional probability of a failure mode when cable damage occurred. (authors)

  1. Behaviour of Spent WWER fuel under long term storage conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kadarmetov, I M [A.A.Bochvar All-Russia Research Institute of Inorganic Materials, Moscow (Russian Federation)

    1999-07-02

    Results of experimental investigation into thermomechanical properties of pre-irradiated Zr-1%Nb alloy over a range temperatures 500-570 grad C are presented. Safety examination of the Ventilation Storage Casks dry storage system has been carried out. Preliminary safety criteria under dry storage conditions in an environment of inert gas are follows: maximum cladding temperature under normal conditions of dry storage should not exceed 330 grad C after 5-year cooling in water-filled pools; maximum allowable temperature of spent fuel rod cladding under operational mode with infringement of heat removal should not exceed 440 grad C over 8 hours. As each SFA dry storage project comprises its individual technology of spent fuel management, it is necessary to evaluate allowable parameters (terms of storage, maximum temperatures of fuel) for each project respectively. The programme of experimental investigations for the justification of safety criteria for WWER-1000 dry spent fuel storage systems is underway. (author)

  2. Flux behaviour under different operational conditions in osmosis process

    DEFF Research Database (Denmark)

    Korenak, Jasmina; Zarebska, Agata; Buksek, Hermina

    the active membrane layer is facing draw solution. Osmosis process can be affected by several factors, such as operating conditions (temperature and cross flow velocity), feed and draw solution properties, and membrane characteristics. These factors can significantly contribute to the efficiency......, and total dissolved solids. Taken together our results can contribute understanding of the how performance of asymmetric FO membranes can be enhanced by feed and draw properties, membrane characteristics and operational conditions.......The transport of water molecules across a semi-permeable membrane is driven by the osmotic pressure difference between feed and draw solution. Two different operational modes can be distinguished, namely FO mode when the active membrane layer is facing the wastewater (feed), and PRO mode when...

  3. A behavioural preparation for the study of human Pavlovian conditioning.

    Science.gov (United States)

    Arcediano, F; Ortega, N; Matute, H

    1996-08-01

    Conditioned suppression is a useful technique for assessing whether subjects have learned a CS-US association, but it is difficult to use in humans because of the need for an aversive US. The purpose of this research was to develop a non-aversive procedure that would produce suppression. Subjects learned to press the space bar of a computer as part of a video game, but they had to stop pressing whenever a visual US appeared, or they would lose points. In Experiment 1, we used an A+/B- discrimination design: The US always followed Stimulus A and never followed Stimulus B. Although no information about the existence of CSs was given to the subjects, suppression ratio results showed a discrimination learning curve-that is, subjects learned to suppress responding in anticipation of the US when Stimulus A was present but not during the presentations of Stimulus B. Experiment 2 explored the potential of this preparation by using two different instruction sets and assessing post-experimental judgements of CS A and CS B in addition to suppression ratios. The results of these experiments suggest that conditioned suppression can be reliably and conveniently used in the human laboratory, providing a bridge between experiments on animal conditioning and experiments on human judgements of causality.

  4. Behaviour of the activity of cellulase irradiated under various conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kumakura, M; Kaetsu, I

    1988-04-18

    The activity of cellulase irradiated at various conditions has been studied. The activity of cellulase irradiated at low temperature (-78 /sup 0/C) increased by heating at 40 /sup 0/C, but that of cellulase irradiated at high temperature above 0 /sup 0/C decreased. The activity of cellulase irradiated in the dry state at room temperature increased with irradiation dose. The effect of adding biological substances such as amino acids, enzymes, and agar on the irradiation of cellulase was studied. It was shown that EDTA and p-benzoquinone have a protective ability against radiation-induced inactivation of the enzyme.

  5. Behaviour of the activity of cellulase irradiated under various conditions

    International Nuclear Information System (INIS)

    Kumakura, M.; Kaetsu, I.

    1988-01-01

    The activity of cellulase irradiated at various conditions has been studied. The activity of cellulase irradiated at low temperature (-78 0 C) increased by heating at 40 0 C, but that of cellulase irradiated at high temperature above 0 0 C decreased. The activity of cellulase irradiated in the dry state at room temperature increased with irradiation dose. The effect of adding biological substances such as amino acids, enzymes, and agar on the irradiation of cellulase was studied. It was shown that EDTA and p-benzoquinone have a protective ability against radiation-induced inactivation of the enzyme. (author)

  6. Thermal behaviour of used resin during conditioning process

    International Nuclear Information System (INIS)

    Arsene, C.

    2016-01-01

    In the nuclear power plants using light water and heavy water as coolant, as well as in most waste treatment installations, the ion-exchange resins are used to purify water circuits. Since the resins retain both radionuclide and chemical impurities, it represents a low- and intermediate- radioactive waste that requires special management for storage and disposal. From experimental studies it was found that the conditioning of the used resin in bitumen has several advantages. But there are some disadvantages, too, one being the significant amount of gas produced during the bituminization process because of the high temperature (1200C). Besides water vapours, the condensable gas mixture (formed by a liquid fraction and an oil fraction) contains products generated from the partial decomposition of the resin and release of degradation products of bitumen: dimethyl and trimethylamine, methanol - compounds resulting from the destruction of functional groups and hydrocarbon fraction formed by n-paraffins (C6-C32), iso-paraffins and aromatics. (authors)

  7. What is the comparative effectiveness of current standard treatment, against an individually tailored behavioural programme delivered either on the Internet or face-to-face for people with acute whiplash associated disorder? A randomized controlled trial.

    Science.gov (United States)

    Bring, Annika; Åsenlöf, Pernilla; Söderlund, Anne

    2016-05-01

    To investigate the comparative effectiveness of current standard treatment, against an individually tailored behavioural programme delivered via the Internet or face-to-face for people with acute whiplash associated disorders. A multicentre, randomized, three-group design, with concealed allocation. A total of 55 participants (37 female), age 18-65, with acute Whiplash Associated Disorder (Grade I-II), recruited at two emergency clinics in Sweden. Before randomization all participants received standard self-care instructions. The Internet and face-to-face groups followed a seven-week behavioural programme involving individual tailoring, via email (Internet group), or in sessions at a physical therapy unit (face-to-face group). The control group only received the self-care instructions. Pain-related disability, pain intensity, self-efficacy in daily activities, catastrophizing and fear of movement/(re)injury. Assessments were performed at baseline (2-4 weeks postinjury) and at three, six and 12 months postintervention. Both the Internet (n = 16) and face-to-face (n = 14) group showed a larger decrease in pain-related disability than the control group (n = 16); -12 and -11, respectively, compared with -5 in the control group at 12-months follow-up. Significant differences between the groups in overall treatment effect were shown in all outcomes except pain intensity. All groups improved significantly over time in all outcomes, except for fear of movement/(re)injury and catastrophizing in the control group. An individually tailored behavioural programme improved biopsychosocial factors in patients with whiplash associated disorders up to 12 months after treatment. Internet-delivered intervention was as effective as clinic-based face-to-face therapy sessions. © The Author(s) 2015.

  8. Experimental program on fuel rod behaviour under off-normal conditions

    International Nuclear Information System (INIS)

    Languille, A.; Cecchi, P.

    1985-01-01

    During LMFBR plant operation, fuel developments are primarily concerned with the fuel pin irradiation behaviour under steady-state conditions up to high burn-up levels. But additional studies under off-normal conditions are necessary in order to assess fuel pin performance and to define operational limits. (author)

  9. Behaviour of lindane (gamma HCH) in soil under laboratory conditions

    International Nuclear Information System (INIS)

    Bennaceur, M.; Ghezal, F.; Coste, C.M.

    1997-01-01

    The degradation of lindane in solid after multiple application was studied. The rate of disappearance of lindane increased at long periods after application. The dissipation of lindane was more rapid in soil collected from treated a plot than an untreated plot, owing to the degradation by micro-organisms suggesting that microorganisms had become adapted to degrade it. The rates of mineralization, mobility and degradation of lindane were also investigated under laboratory conditions using 14 C-labelled lindane. The results showed that most of the applied dose remained on the upper 6cm in the soil columns. Over a periods of three months, extractable residues, bound residues and evolution of 14 CO 2 were recorded. After 12 weeks, the soil contained about 50% of the initially applied 14 C and 20% was bound to the soil. The evolution of 14 CO 2 increased with time, amounting to 3.1% in non-sterile soil and less than 1% in sterile soil. The hexane 14 C-extractable residues were shown, by TLC, to contain lindane as the main product. (author). 5 refs, 4 tabs

  10. Controlling Structural Characteristics of Single-Walled Carbon Nanotubes (SWNT) by Tailoring Catalyst Composition and Synthesis Conditions

    International Nuclear Information System (INIS)

    Resasco, Daniel E.

    2010-01-01

    This report shows the extensive research on the mechanism responsible for the formation of single walled carbon nanotubes in order to get control over their structural parameters (diameter and chirality). Catalyst formulations, pre-treatment conditions, and reaction conditions are described in detail as well as mechanisms to produce nanotubes structures of specific arrays (vertical forest, nanotube pillars). Applications of SWNT in different fields are also described in this report. In relation to this project five students have graduated (3 PhD and 2 MS) and 35 papers have been published.

  11. Protocol for the ADDITION-Plus study: a randomised controlled trial of an individually-tailored behaviour change intervention among people with recently diagnosed type 2 diabetes under intensive UK general practice care

    Directory of Open Access Journals (Sweden)

    Fanshawe Tom

    2011-04-01

    Full Text Available Abstract Background The increasing prevalence of type 2 diabetes poses both clinical and public health challenges. Cost-effective approaches to prevent progression of the disease in primary care are needed. Evidence suggests that intensive multifactorial interventions including medication and behaviour change can significantly reduce cardiovascular morbidity and mortality among patients with established type 2 diabetes, and that patient education in self-management can improve short-term outcomes. However, existing studies cannot isolate the effects of behavioural interventions promoting self-care from other aspects of intensive primary care management. The ADDITION-Plus trial was designed to address these issues among recently diagnosed patients in primary care over one year. Methods/Design ADDITION-Plus is an explanatory randomised controlled trial of a facilitator-led, theory-based behaviour change intervention tailored to individuals with recently diagnosed type 2 diabetes. 34 practices in the East Anglia region participated. 478 patients with diabetes were individually randomised to receive (i intensive treatment alone (n = 239, or (ii intensive treatment plus the facilitator-led individual behaviour change intervention (n = 239. Facilitators taught patients key skills to facilitate change and maintenance of key behaviours (physical activity, dietary change, medication adherence and smoking, including goal setting, action planning, self-monitoring and building habits. The intervention was delivered over one year at the participant's surgery and included a one-hour introductory meeting followed by six 30-minute meetings and four brief telephone calls. Primary endpoints are physical activity energy expenditure (assessed by individually calibrated heart rate monitoring and movement sensing, change in objectively measured dietary intake (plasma vitamin C, medication adherence (plasma drug levels, and smoking status (plasma cotinine levels at

  12. Protocol for the ADDITION-Plus study: a randomised controlled trial of an individually-tailored behaviour change intervention among people with recently diagnosed type 2 diabetes under intensive UK general practice care.

    Science.gov (United States)

    Griffin, Simon J; Simmons, Rebecca K; Williams, Kate M; Prevost, A Toby; Hardeman, Wendy; Grant, Julie; Whittle, Fiona; Boase, Sue; Hobbis, Imogen; Brage, Soren; Westgate, Kate; Fanshawe, Tom; Sutton, Stephen; Wareham, Nicholas J; Kinmonth, Ann Louise

    2011-04-04

    The increasing prevalence of type 2 diabetes poses both clinical and public health challenges. Cost-effective approaches to prevent progression of the disease in primary care are needed. Evidence suggests that intensive multifactorial interventions including medication and behaviour change can significantly reduce cardiovascular morbidity and mortality among patients with established type 2 diabetes, and that patient education in self-management can improve short-term outcomes. However, existing studies cannot isolate the effects of behavioural interventions promoting self-care from other aspects of intensive primary care management. The ADDITION-Plus trial was designed to address these issues among recently diagnosed patients in primary care over one year. ADDITION-Plus is an explanatory randomised controlled trial of a facilitator-led, theory-based behaviour change intervention tailored to individuals with recently diagnosed type 2 diabetes. 34 practices in the East Anglia region participated. 478 patients with diabetes were individually randomised to receive (i) intensive treatment alone (n = 239), or (ii) intensive treatment plus the facilitator-led individual behaviour change intervention (n = 239). Facilitators taught patients key skills to facilitate change and maintenance of key behaviours (physical activity, dietary change, medication adherence and smoking), including goal setting, action planning, self-monitoring and building habits. The intervention was delivered over one year at the participant's surgery and included a one-hour introductory meeting followed by six 30-minute meetings and four brief telephone calls. Primary endpoints are physical activity energy expenditure (assessed by individually calibrated heart rate monitoring and movement sensing), change in objectively measured dietary intake (plasma vitamin C), medication adherence (plasma drug levels), and smoking status (plasma cotinine levels) at one year. We will undertake an intention

  13. Effects of Rearing Conditions on Behaviour and Endogenous Opioids in Rats with Alcohol Access during Adolescence

    Science.gov (United States)

    Roman, Erika; Nylander, Ingrid

    2013-01-01

    Causal links between early-life stress, genes and later psychiatric diagnoses are not possible to fully address in human studies. Animal models therefore provide an important complement in which conditions can be well controlled and are here used to study and distinguish effects of early-life stress and alcohol exposure. The objective of this study was to investigate the impact of rearing conditions on behaviour in young rats and if these changes could be followed over time and to examine interaction effects between early-life environment and adolescent alcohol drinking on behaviour and immunoreactive levels of the opioid peptides dynorphin B, met-enkephalin-Arg6Phe7 and beta-endorphin. We employed a rodent model, maternal separation, to study the impact of rearing conditions on behaviour, voluntary alcohol consumption and alcohol-induced effects. The consequences of short, 15 min (MS 15), and long, 360 min (MS 360), maternal separation in combination with adolescent voluntary alcohol consumption on behaviour and peptides were examined. A difference in the development of risk taking behaviour was found between the MS15 and MS360 while the development of general activity was found to differ between intake groups. Beta-endorphin levels in the pituitary and the periaqueductal gray area was found to be higher in the MS15 than the MS360. Adolescent drinking resulted in higher dynorphin B levels in the hippocampus and higher met-enkephalin-Arg6Phe7 levels in the amygdala. Amygdala and hippocampus are involved in addiction processes and changes in these brain areas after adolescent alcohol drinking may have consequences for cognitive function and drug consumption behaviour in adulthood. The study shows that individual behavioural profiling over time in combination with neurobiological investigations provides means for studies of causality between early-life stress, behaviour and vulnerability to psychiatric disorders. PMID:24098535

  14. The triply troubled teenager--chronic conditions associated with fewer protective factors and clustered risk behaviours.

    Science.gov (United States)

    Nylander, Charlotte; Seidel, Carina; Tindberg, Ylva

    2014-02-01

    This study aimed to measure protective factors and risk behaviour among adolescents with chronic conditions (CCs) and to evaluate the impact of protective factors on risk-taking. A population-based study of 7262 students aged 15 and 17 years old was performed in Sörmland, Sweden 2008 (response rate 82%). The questionnaire explored background factors, CCs, risk behaviours and protective factors. CCs were reported by 8%, while 58% had no health problems. Girls with CCs encompassed less individual protective factors, while boys with CCs tended to over-report all individual risk behaviours compared with healthy peers. Both boys and girls with CCs were more likely to report few protective factors and co-occurrence of risk behaviours. The adjOR for clustered health risk behaviours was 1.6 (1.0-2.5) in youths with CCs and ≥4 protective factors and 6.3 (3.6-10.9) in youths with CCs and 0-3 protective factors, as compared to healthy peers with ≥4 protective factors. Adolescents with CCs reported fewer protective factors and more risk behaviours than their healthy peers. The vulnerability of adolescents with CCs and few protective factors is important to acknowledge. Professionals should provide stronger protection for these adolescents, to prevent risky behaviour. ©2013 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

  15. Thermal behaviour of fuel: influence on the behavior of fuel elements in nominal and incidental operating conditions

    International Nuclear Information System (INIS)

    Languille, A.

    1984-02-01

    The behaviour of the oxide, in normal conditions as well as in incidental conditions is an important care at the fuel element design level in a fast reactor. In nominal operating conditions, the probability of melt to core of the pellet is very low and even for high burnup. The behaviour in incidental operating conditions is also satisfying, especially for inadvertent rod ejections [fr

  16. The modeling of fuel rod behaviour under RIA conditions in the code DYN3D

    International Nuclear Information System (INIS)

    Rohde, U.

    2001-01-01

    A description of the fuel rod behaviour and heat transfer model used in the code DYN3D for nuclear reactor core dynamic simulations is given. Besides the solution of heat conduction equations in fuel and cladding, the model comprises a detailed description of heat transfer in the gas gap by conduction, radiation and fuel-cladding contact. The gas gap behaviour is modeled in a mechanistic way taking into account transient changes of the gas gap parameters based on given conditions for the initial state. Thermal, elastic and plastic deformations of fuel and cladding are taken into account within 1D approximation. A creeping law for time-dependent estimation of plastic deformations is implemented. Metal-water reaction of the cladding material in the high temperature region is considered. The cladding-coolant heat transfer regime map covers the region from one-phase liquid convection to dispersed flow with superheated steam. Special emphasis is put on taking into account the impact of thermodynamic non-equilibrium conditions on heat transfer. For the validation of the model, experiments on fuel rod behaviour during RIAs carried out in Russian and Japanese pulsed research reactors with shortened probes of fresh fuel rods are calculated. Comparisons between calculated and measured results are shown and discussed. It is shown, that the fuel rod behaviour is significantly influenced by plastic deformation of the cladding, post crisis heat transfer with sub-cooled liquid conditions and heat release from the metal-water reaction. Numerical studies concerning the fuel rod behaviour under RIA conditions in power reactors are reported on. It is demonstrated, that the fuel rod behaviour at high pressures and flow rates in power reactors is different from the behaviour under atmospheric pressure and stagnant flow conditions in the experiments. The mechanisms of fuel rod failure for fresh and burned fuel reported from the literature can be qualitatively reproduced by the DYN3D

  17. Addressing individual behaviours and living conditions: Four Nordic public health policies

    DEFF Research Database (Denmark)

    Vallgårda, Signild

    2011-01-01

    : Analyses of recent public health programmes in Denmark, Finland, Norway, and Sweden. Results: Focus is on either, or both, individual behaviour and living conditions as causes of ill health; the remedies are classical liberal as well as social democratic policies. None of the programmes is consistent...... approach to public health exists. All programmes contain contradictory policies and ideological statements with differences regarding the emphasis on individual behaviour versus choice and living conditions and political responsibility. The policies are not entirely predictable from the political stance...

  18. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake

    NARCIS (Netherlands)

    Elbert, Sarah P.; Dijkstra, Arie; Rozema, Andrea

    2017-01-01

    Objective: Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating

  19. The modeling of fuel rod behaviour under RIA conditions in the code DYN3D

    International Nuclear Information System (INIS)

    Rohde, U.

    1998-01-01

    A description of the fuel rod behaviour and heat transfer model used in the code DYN3D for nuclear reactor core dynamic simulations is given. Besides the solution of heat conduction equations in fuel and cladding, the model comprises detailed description of heat transfer in the gas gap by conduction, radiation and fuel-cladding contact. The gas gap behaviour is modeled in a mechanistic way taking into account transient changes of the gas gap parameters based on given conditions for the initial state. Thermal, elastic and plastic deformations of fuel and cladding are taken into account within 1D approximation. Numerical studies concerning the fuel rod behaviour under RIA conditions in power reactors are reported. Fuel rod behaviour at high pressures and flow rates in power reactors is different from the behaviour under atmospheric pressure and stagnant flow conditions in the experiments. The mechanisms of fuel rod failure for fresh and burned fuel reported from the literature can be qualitatively reproduced by the DYN3D model. (author)

  20. Understanding the behaviour of the actinides under disposal conditions: A comparison between calculated and experimental solubilities

    International Nuclear Information System (INIS)

    Pryke, D.C.; Rees, J.H.

    1986-01-01

    The solubilities of plutonium, americium and neptunium measured in simulated near-field waters have compared with those predicted using the simple thermodynamic model NearSol. The dependence of solubility on pH and redox potential is examined in an effort to understand the behaviour of actinides in disposal. The agreement was variable. Differences could be appreciable, in particular for neptunium under oxidizing conditions; conversly, the model successfully predicted the behaviour of neptunium under reducing conditions. Such comparisons pinpointed deficiences in the thermodynamic data base and showed the sensitivity of solubilities to certain experimental parameters such as Eh and the concentration of carbonate ions. A comparison between NearSol and the reaction pathway program PHREEQE gave generally good agreement. NearSol was quicker and easier to use, requiring only limited preselection of participating species; however it did not account for the behaviour of bulk inactive species in solution; like feature will be built into an updated version. (orig.)

  1. Analysis of the behaviour of the Kozloduy NPP Unit 3 under severe accident conditions

    International Nuclear Information System (INIS)

    Velev, V.; Saraeva, V.

    2004-01-01

    The objective of the analysis is to study the behaviour of the Kozloduy NPP Unit 3 under severe accident conditions. The analysis is performed using computer code MELCOR 1.8.4. This report includes a brief description of Unit 3 active core as well as description and comparison of the key events

  2. Neurological condition assessed with the Hempel examination and cognition and behaviour at 4 years

    NARCIS (Netherlands)

    Schendelaar, Pamela; Seggers, Jorien; Heineman, Maas Jan; Hadders-Algra, Mijna

    Aim: To investigate associations between neurological condition, assessed with the Hempel examination, in terms of minor neurological dysfunction (MND) and neurological optimality, and cognition and behaviour at 4 years. Study design: Cross-sectional analyses within a prospective, assessor-blinded

  3. Exposures to Conditioned Flavours with Different Hedonic Values Induce Contrasted Behavioural and Brain Responses in Pigs

    OpenAIRE

    Clouard, Caroline; Jouhanneau, Mélanie; Meunier-Salaün, Marie-Christine; Malbert, Charles-Henri; Val-Laillet, David

    2012-01-01

    This study investigated the behavioural and brain responses towards conditioned flavours with different hedonic values in juvenile pigs. Twelve 30-kg pigs were given four three-day conditioning sessions: they received three different flavoured meals paired with intraduodenal (i.d.) infusions of 15% glucose (F(Glu)), lithium chloride (F(LiCl)), or saline (control treatment, F(NaCl)). One and five weeks later, the animals were subjected to three two-choice feeding tests without reinforcement to...

  4. Tailor-made surfactants for optimized chemical EOR. Meeting oil reservoir conditions by applied knowledge of structure-performance relationship in extended surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Trahan, G.; Sorensen, W. [Sasol North America Inc., Westlake, LA (United States); Jakobs-Sauter, B. [Sasol Germany GmbH (Germany)

    2013-08-01

    Formulating the surfactant package for chemical EOR is a time consuming and expensive process - the formulation needs to fit the specific reservoir conditions (like oil type, temperature, salinity, etc.) to give optimum performance and the number of formulation variables is virtually endless. This paper studies the impact of surfactant structure on EOR formulation ability and performance and how to adjust the structure of the surfactant molecule to meet a specific reservoir's needs. Data from salinity phase boundary studies of alcohol propoxy sulfates illustrate how changes in alcohol structure as well as in propylene oxide level can shift optimum salinity and temperature to the desired range in a given model oil. From these data the impact of individual structural units was evaluated. Application of the HLD model (Hydrophilic-Lipophilic Deviation) shows how to extrapolate from the known data set to actual reservoir conditions. This is illustrated by studies on crude oil samples. Additional tests study how effective the selected surfactants perform. The HLD concept proves to be a valuable tool to select and tailor surfactants to individual reservoir needs, thus simplifying the surfactant screening process for EOR formulations by pre-selection of suitable structures and ultimately reducing cost and effort on the way to the most effective chemical EOR package. (orig.)

  5. Selfwelding, friction and wear behaviour of special materials in sodium under corroding conditions

    International Nuclear Information System (INIS)

    Borgstedt, H.U.; Mattes, K.; Wild, E.

    1975-11-01

    Control rod guides and fuel element duct load pads have to be fabricated from materials exhibiting optimum slide behaviour. Galling or self-welding under static conditions should not be tolerated. Given bearing clearances have to be maintained constant and loop contamination, caused by wear particles, have to be prevented. Since high friction between contacting pads may impose severe limitations on core compaction, for the duct load pads a maximum friction coefficient of 0.5 is acceptable. The effect of sodium corrosion should not impair the friction and wear behaviour of the materials applied. This report covers the work performed to optain appropriate mechanical design data. (orig.) [de

  6. Impact of fission gas on irradiated PWR fuel behaviour at extended burnup under RIA conditions

    International Nuclear Information System (INIS)

    Lemoine, F.; Schmitz, F.

    1996-01-01

    With the world-wide trend to increase the fuel burnup at discharge of the LWRs, the reliability of high burnup fuel must be proven, including its behaviour under energetic transient conditions, and in particular during RIAs. Specific aspects of irradiated fuel result from the increasing retention of gaseous and volatile fission products with burnup. The potential for swelling and transient expansion work under rapid heating conditions characterizes the high burnup fuel behaviour by comparison to fresh fuel. This effect is resulting from the steadily increasing amount of gaseous and volatile fission products retained inside the fuel structure. An attempt is presented to quantify the gas behaviour which is motivated by the results from the global tests both in CABRI and in NSRR. A coherent understanding of specific results, either transient release or post transient residual retention has been reached. The early failure of REP Na1 with consideration given to the satisfactory behaviour of the father rod of the test pin at the end of the irradiation (under load follow conditions) is to be explained both by the transient loading from gas driven fuel swelling and from the reduced clad resistance due to hydriding. (R.P.)

  7. Material pre-conditioning effects on the creep behaviour of 316H stainless steel

    International Nuclear Information System (INIS)

    Mehmanparast, A.; Davies, C.M.; Dean, D.W.; Nikbin, K.

    2013-01-01

    Material pre-conditioning by, for example, pre-strain through component bending and welding is known to alter the creep deformation and creep crack growth (CCG) behaviour of 316H stainless steel. Experimental test data on the creep deformation and crack growth behaviour of 316H weldment compact tension specimens at 550 °C, where the starter defect was introduced into the heat affected zone (HAZ), have been compared to those of obtained from similar specimens manufactured from parent material, which had been subjected to 8% compressive plastic pre-strain at room temperature. Similar degrees of accelerated cracking behaviour compared to parent material, for given values of C*, were exhibited in both 316H HAZ and pre-compressed parent materials. This acceleration has been attributed to the influence of material hardening effects and the reduction of creep ductility in the pre-conditioned materials. These results are discussed in terms of the potential for using material pre-conditioning to assist in predicting the long term cracking behaviour of high temperature 316H stainless steel plant components from shorter term laboratory CCG tests

  8. Valence of physical stimuli, not housing conditions, affects behaviour and frontal cortical brain activity in sheep.

    Science.gov (United States)

    Vögeli, Sabine; Lutz, Janika; Wolf, Martin; Wechsler, Beat; Gygax, Lorenz

    2014-07-01

    Modulation of short-term emotions by long-term mood is little understood but relevant to understand the affective system and of importance in respect to animal welfare: a negative mood might taint experiences, whilst a positive mood might alleviate single negative events. To induce different mood states in sheep housing conditions were varied. Fourteen ewes were group-housed in an unpredictable, stimulus-poor and 15 ewes in a predictable, stimulus-rich environment. Sheep were tested individually for mood in a behavioural cognitive bias paradigm. Also, their reactions to three physical stimuli thought to differ in their perceived valence were observed (negative: pricking, intermediate: slight pressure, positive: kneading). General behaviour, activity, ear movements and positions, and haemodynamic changes in the cortical brain were recorded during stimulations. Generalised mixed-effects models and model probabilities based on the BIC (Bayesian information criterion) were used. Only weak evidence for mood difference was found. Sheep from the unpredictable, stimulus-poor housing condition had a somewhat more negative cognitive bias, showed slightly more aversive behaviour, were slightly more active and moved their ears somewhat more. Sheep most clearly differentiated the negative from the intermediate and positive stimulus in that they exhibited more aversive behaviour, less nibbling, were more active, showed more ear movements, more forward ear postures, fewer backward ear postures, and a stronger decrease in deoxyhaemoglobin when subjected to the negative stimulus. In conclusion, sheep reacted towards stimuli according to their presumed valence but their mood was not strongly influenced by housing conditions. Therefore, behavioural reactions and cortical brain activity towards the stimuli were hardly modulated by housing conditions. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. The relation between working conditions, aberrant driving behaviour and crash propensity among taxi drivers in China.

    Science.gov (United States)

    Wang, Yonggang; Li, Linchao; Prato, Carlo G

    2018-04-03

    Although the taxi industry is playing an important role in Chinese everyday life, little attention has been posed towards occupational health issues concerning the taxi drivers' working conditions, driving behaviour and road safety. A cross-sectional survey was administered to 1021 taxi drivers from 21 companies in four Chinese cities and collected information about (i) sociodemographic characteristics, (ii) working conditions, (iii) frequency of daily aberrant driving behaviour, and (iv) involvement in property-damage-only (PDO) and personal injury (PI) crashes over the past two years. A hybrid bivariate model of crash involvement was specified: (i) the hybrid part concerned a latent variable model capturing unobserved traits of the taxi drivers; (ii) the bivariate part modelled jointly both types of crashes while capturing unobserved correlation between error terms. The survey answers paint a gloomy picture in terms of workload, as taxi drivers reported averages of 9.4 working hours per day and 6.7 working days per week that amount on average to about 63.0 working hours per week. Moreover, the estimates of the hybrid bivariate model reveal that increasing levels of fatigue, reckless behaviour and aggressive behaviour are positively related to a higher propensity of crash involvement. Lastly, the heavy workload is also positively correlated with the higher propensity of crashing, not only directly as a predictor of crash involvement, but also indirectly as a covariate of fatigue and aberrant driving behaviour. The findings from this study provide insights into potential strategies for preventive education and taxi industry management to improve the working conditions and hence reduce fatigue and road risk for the taxi drivers. Copyright © 2018 Elsevier Ltd. All rights reserved.

  10. Behaviour of LWR core materials under accident conditions. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-12-01

    At the invitation of the Government of the Russian Federation, following a proposal of the International Working Group on Water Reactor Fuel Performance and Technology, the IAEA convened a Technical Committee Meeting on Behaviour of LWR Core Materials Under Accident Conditions from 9 to 13 October 1995 in Dimitrovgrad to analyze and evaluate the behaviour of LWR core materials under accident conditions with special emphasis on severe accidents. In-vessel severe accidents phenomena were considered in detail, but specialized thermal hydraulic aspects as well as ex-vessel phenomena were outside the scope of the meeting. Forty participants representing eight countries attended the meeting. Twenty-three papers were presented and discussed during five sessions. Refs, figs, tabs

  11. Study of colloidal particles behaviour in the PWR primary circuit conditions

    International Nuclear Information System (INIS)

    Barale, M.

    2006-12-01

    EDF wants to understand, model and limit primary circuit contamination of Pressurized Water Reactors by colloidal particles resulting from corrosion. The electrostatic behaviour of representative oxide particles (cobalt ferrite, nickel ferrite and magnetite) has been studied in primary circuit conditions with the influence of boric acid and lithium hydroxide. The isoelectric point (IEP) and the point of zero charge (PZC) of particles, measured between 5 C and 320 C, exhibit a minimum towards 200 C. The thermodynamic constants of the protonation equilibrium of surface sites were calculated. When boric acid is added, zeta potential and IEP decrease because of borate ions sorption. On the contrary, there is not effect of lithium ions. The modelling of these results under conditions representative of primary circuit shows that these oxides exhibit a negative surface charge, explaining their sorption and adhesion behaviour. (author)

  12. Topographic conditions and physical activity behaviour of young adults in Austria

    OpenAIRE

    Szabo, Barbara; Gollner, Erwin; Schnabel, Florian

    2014-01-01

    In Austria there is an east-west divide concerning the amount of physical activity that has been detected. This is associated with poorer health in the eastern region of Austria compared to the western. Experts think that differences in topographic conditions might be a reason for these differences. However this hypothesis until now has not been scientifically proven. This study incorporates a multi-staged approach. First, outdoor physical activity behaviour (levels of exercise, favourite act...

  13. BEHAVIOUR OF BACKFILL MATERIALS FOR ELECTRICAL GROUNDING SYSTEMS UNDER HIGH VOLTAGE CONDITIONS

    Directory of Open Access Journals (Sweden)

    S. C. LIM

    2015-06-01

    Full Text Available Backfill materials like Bentonite and cement are effective in lowering grounding resistance of electrodes for a considerable period. During lightning, switching impulses and earth fault occurrences in medium and high voltage networks, the grounding system needs to handle extremely high currents either for a short duration or prolonged period respectively. This paper investigates the behaviour of bentonite, cement and sand under impulse and alternating high voltage (50Hz conditions. Fulguritic-formation was observed in all materials under alternating high voltage. The findings reveal that performance of grounding systems under high voltage conditions may significantly change from the outcomes anticipated at design stage.

  14. Why building capacity is a necessary but insufficient condition for improved waste management in South Africa: The knowledge–behaviour relationship

    CSIR Research Space (South Africa)

    Godfrey, Linda K

    2010-10-01

    Full Text Available beliefs form behavioural intentions which result in behaviour. Findings show that building capacity, which support control beliefs, while certainly a necessary condition, is insufficient to change waste behaviour. Consideration needs to be given...

  15. Results of tests under normal and abnormal operating conditions concerning LMFBR fuel element behaviour

    International Nuclear Information System (INIS)

    Languille, A.; Bergeonneau, P.; Essig, C.; Guerin, Y.

    1985-04-01

    The objective of this paper is to improve the knowledge on LMFBR fuel element behaviour during protected and unprotected transients in RAPSODIE and PHENIX reactors in order to evaluate its reliability. The range of the tests performed in these reactors is sufficiently large to cover normal and also extreme off normal conditions such as fuel melting. Results of such tests allow to better establish transient design limits for reactor structural components in particular for fuel pin cladding which play a lead role in controlling the accident sequence. Three main topics are emphasized in this paper: fuel melting during slow over-power excursions; influence of the fuel element geometrical evolution on reactivity feedback effects and reactor dynamic behaviour; clad damage evaluation during a transient (essentially very severe loss of flow)

  16. Compas project stress analysis of HLW containers: behaviour under realistic disposal conditions

    International Nuclear Information System (INIS)

    Ove Arup and Partners, London

    1990-01-01

    The Compas project is concerned with the structural performance of metal overpacks which may be used to encapsulate vitrified high-level waste (HLW) forms before disposal in deep geological repositories. In this final stage of the project, analysis of an HLW overpack of realistic design is performed to predict its behaviour when subjected to likely repository loads. This analysis work is undertaken with the benefit of experience gained in previous phases of the project in which the ability to accurately predict overpack behaviour, when subjected to a uniform external pressure, was demonstrated. Burial in clay, granite and salt environments has been considered and two distinct loading arrangements identified, in an attempt to represent the worst conditions that could be imposed by such media. The analysis successfully demonstrates the ability of the containers to withstand extreme, yet credible, repository loads

  17. Effects of plastic bits on the condition and behaviour of captive-reared pheasants.

    Science.gov (United States)

    Butler, D A; Davis, C

    2010-03-27

    Between 2005 and 2007, data were collected from game farms across England and Wales to examine the effects of the use of bits on the physiological condition and behaviour of pheasants. On each site, two pheasant pens kept in the same conditions were randomly allocated to either use bits or not. The behaviour and physiological conditions of pheasants in each treatment pen were assessed on the day of bitting and weekly thereafter until release. Detailed records of feed usage, medications and mortality were also kept. Bits halved the number of acts of bird-on-bird pecking, but they doubled the incidence of headshaking and scratching. Bits caused nostril inflammation and bill deformities in some birds, particularly after seven weeks of age. In all weeks after bitting, feather condition was poorer in non-bitted pheasants than in those fitted with bits. Less than 3 per cent of bitted birds had damaged skin, but in the non-bitted pens this figure increased over time to 23 per cent four weeks later. Feed use and mortality did not differ between bitted and non-bitted birds.

  18. Behavioural conditioning of immune functions: how the central nervous system controls peripheral immune responses by evoking associative learning processes.

    Science.gov (United States)

    Riether, Carsten; Doenlen, Raphaël; Pacheco-López, Gustavo; Niemi, Maj-Britt; Engler, Andrea; Engler, Harald; Schedlowski, Manfred

    2008-01-01

    During the last 30 years of psychoneuroimmunology research the intense bi-directional communication between the central nervous system (CNS) and the immune system has been demonstrated in studies on the interaction between the nervous-endocrine-immune systems. One of the most intriguing examples of such interaction is the capability of the CNS to associate an immune status with specific environmental stimuli. In this review, we systematically summarize experimental evidence demonstrating the behavioural conditioning of peripheral immune functions. In particular, we focus on the mechanisms underlying the behavioural conditioning process and provide a theoretical framework that indicates the potential feasibility of behaviourally conditioned immune changes in clinical situations.

  19. Effects of food type on diel behaviours of common carp Cyprinus carpio in simulated aquaculture pond conditions

    NARCIS (Netherlands)

    Rahman, M.M.; Meyer, C.G.

    2009-01-01

    In order to better understand behaviour patterns of common carp Cyprinus carpio in aquaculture ponds, their diel grazing, swimming, resting and schooling behaviours were observed in six 1 m(2) tanks under simulated pond conditions. Each tank was fertilized to stimulate natural food production before

  20. Social makes smart: rearing conditions affect learning and social behaviour in jumping spiders.

    Science.gov (United States)

    Liedtke, J; Schneider, J M

    2017-11-01

    There is a long-standing debate as to whether social or physical environmental aspects drive the evolution and development of cognitive abilities. Surprisingly few studies make use of developmental plasticity to compare the effects of these two domains during development on behaviour later in life. Here, we present rearing effects on the development of learning abilities and social behaviour in the jumping spider Marpissa muscosa. These spiders are ideally suited for this purpose because they possess the ability to learn and can be reared in groups but also in isolation without added stress. This is a critical but rarely met requirement for experimentally varying the social environment to test its impact on cognition. We split broods of spiders and reared them either in a physically or in a socially enriched environment. A third group kept under completely deprived conditions served as a 'no-enrichment' control. We tested the spiders' learning abilities by using a modified T-maze. Social behaviour was investigated by confronting spiders with their own mirror image. Results show that spiders reared in groups outperform their conspecifics from the control, i.e. 'no-enrichment', group in both tasks. Physical enrichment did not lead to such an increased performance. We therefore tentatively suggest that growing up in contact with conspecifics induces the development of cognitive abilities in this species.

  1. SSYST, Modular System for Transient Fuel Rod Behaviour Under Accident Condition

    International Nuclear Information System (INIS)

    Gulden, W.; Meyder, R.; Borgwaldt, H.

    1987-01-01

    1 - Description of problem or function: SSYST is a code system for analyzing transient fuel rod behaviour under off-normal conditions, developed jointly by the Institut fuer Kernenergetik und Energie-systeme (IKE), Stuttgart, and Kernforschungszentrum Karlsruhe (KfK) under contract for the Projekt Nukleare Sicherheit (PNS) at KfK. Main differences versus codes with similar applications are: (1) an open-ended modular code organisation; (2) a preference for simple models, wherever possible. While feature (1) makes SSYST a very flexible tool, easily adapted to changing requirements, feature (2) leads to short execution times. The analysis of transient rod behaviour under LOCA boundary conditions takes 2 minutes CPU time on IBM 3033, so that extensive parametric studies are feasible. Main differences between SSYST-3 and previous versions are related to a general clean-up of the code system, which reduces the implementation effort: - advanced modules for cladding deformation and oxidation and reflooding conditions are included; - an input processor thoroughly checks all input data

  2. Creep behaviour of polyurethanes applied in the offshore industry under dynamic service conditions

    Energy Technology Data Exchange (ETDEWEB)

    Aquino, Fabio G.; Sheldrake, Terry; Clevelario, Judimar; Pires, Fabio S. [Wellstream International S/A - Rio de Janeiro, RJ (Brazil)], e-mail: fabio.aquino@wellstream.com; Souza, Miguel L. [Newtech Ltda, Sao Carlos, SP (Brazil)

    2011-07-01

    The oil industry commonly uses flexible pipes to convey oil and gas from wells to platforms that move constantly due to weather and tidal conditions. In this scenario, polymeric components are required to transitioning between the flexible material of the pipelines to the rigid material of the platform; polyurethanes are versatile polymers suitable for performing such services. As this material is subjected to constant loading during working conditions, and it its durability is to be maintained for several decades, it is important to determine the material's creep properties that relate to deformation caused by constant loading, which can represent an indirect measurement of the material's lifetime. In this study, creep behaviour data on the polyurethane samples was collected and an asymmetrical and nonlinear behaviour was observed. Additionally the material presented a creep fracture line with points only above 150% of deformation, considerably exceeding maximum values for its service conditions, which is limited to 10% of deformation considering the worst loading case for design premises of the final artifact. (author)

  3. The behaviour of water-cooled reactor fuel rods in steady state and transient conditions

    International Nuclear Information System (INIS)

    Strupczewski, A.; Marks, P.

    1997-01-01

    In this report, the results of temperature field and filling gas pressure calculations by means of contemporary calculational models for a WWER-440 and WWER-1000 type fuel rod at low and high burnup operating under steady-state conditions are presented. A review of in-core temperature and pressure measurements for various types of LWR fuel is also included. Basing on calculational and collected measured data, the behaviour of fuel cladding during large and small break LOCA, is estimated with special emphasis on their oxidation and failure resistance. (author)

  4. A Comparative Study of the Behaviour of Five Dense Glass Materials Under Shock Loading Conditions

    Science.gov (United States)

    Radford, Darren D.; Proud, William G.; Field, John E.

    2001-06-01

    Previous work at the Cavendish Laboratory on the properties of glasses under shock loading has demonstrated that the material response is highly dependent upon the composition of the glass. The shock response of glass materials with an open structure, such as borosilicate, exhibits a ramping behaviour in the longitudinal stress histories due to structural collapse. Glass materials with a “filled” microstructure, as in the case of Type-D, Extra Dense Flint (DEDF) do not exhibit a ramping behaviour and behave in a manner similar to polycrystalline ceramics [1]. The current investigation compares the behaviour of five such glasses (SF15, DEDF, LACA, SF57 and DEDF-927210) under shock loading conditions. It is observed that slight changes in material composition can have a large affect on the inelastic behaviour. Principal Hugoniot and shear strength data are presented for all of the materials for pressures ranging from 2 to 14 GPa. Evidence of the so-called failure-front [2] is presented via lateral stress histories measured using manganin stress gauges and confirmed with high-speed photography. 1. Bourne, N.K., Millett, J.C.F., and Field, J.E., “On the strength of shocked glasses” Proc. R. Soc. Lond. A 455 (1999) 1275-1282 2. Brar, N.S., “Failure Waves in Glass and Ceramics Under Shock Compression”, in "Shock Compression of Condensed Matter 1999", ed. M.D. Furnish, L.C. Chhabildas, and R.S. Hixson, American Institute of Physics, Woodbury, New York, (1999) 601-606

  5. Computational analysis of the behaviour of nuclear fuel under steady state, transient and accident conditions

    International Nuclear Information System (INIS)

    2007-12-01

    Accident analysis is an important tool for ensuring the adequacy and efficiency of the provision in the defence in depth concept to cope with challenges to plant safety. Accident analysis is the milestone of the demonstration that the plant is capable of meeting any prescribed limits for radioactive releases and any other acceptable limits for the safe operation of the plant. It is used, by designers, utilities and regulators, in a number of applications such as: (a) licensing of new plants, (b) modification of existing plants, (c) analysis of operational events, (d) development, improvement or justification of the plant operational limits and conditions, and (e) safety cases. According to the defence in depth concept, the fuel rod cladding constitutes the first containment barrier of the fission products. Therefore, related safety objectives and associated criteria are defined, in order to ensure, at least for normal operation and anticipated transients, the integrity of the cladding, and for accident conditions, acceptable radiological consequences with regard to the postulated frequency of the accident, as usually identified in the safety analysis reports. Therefore, computational analysis of fuel behaviour under steady state, transient and accident conditions constitutes a major link of the safety case in order to justify the design and the safety of the fuel assemblies, as far as all relevant phenomena are correctly addressed and modelled. This publication complements the IAEA Safety Report on Accident Analysis for Nuclear Power Plants (Safety Report Series No. 23) that provides practical guidance for establishing a set of conceptual and formal methods and practices for performing accident analysis. Computational analysis of the behaviour of nuclear fuel under transient and accident conditions, including normal operation (e.g. power ramp rates) is developed in this publication. For design basis accidents, depending on the type of influence on a fuel element

  6. Behavioural responses to thermal conditions affect seasonal mass change in a heat-sensitive northern ungulate.

    Directory of Open Access Journals (Sweden)

    Floris M van Beest

    Full Text Available BACKGROUND: Empirical tests that link temperature-mediated changes in behaviour (activity and resource selection to individual fitness or condition are currently lacking for endotherms yet may be critical to understanding the effect of climate change on population dynamics. Moose (Alces alces are thought to suffer from heat stress in all seasons so provide a good biological model to test whether exposure to non-optimal ambient temperatures influence seasonal changes in body mass. Seasonal mass change is an important fitness correlate of large herbivores and affects reproductive success of female moose. METHODOLOGY/PRINCIPAL FINDINGS: Using GPS-collared adult female moose from two populations in southern Norway we quantified individual differences in seasonal activity budget and resource selection patterns as a function of seasonal temperatures thought to induce heat stress in moose. Individual body mass was recorded in early and late winter, and autumn to calculate seasonal mass changes (n = 52 over winter, n = 47 over summer. We found large individual differences in temperature-dependent resource selection patterns as well as within and between season variability in thermoregulatory strategies. As expected, individuals using an optimal strategy, selecting young successional forest (foraging habitat at low ambient temperatures and mature coniferous forest (thermal shelter during thermally stressful conditions, lost less mass in winter and gained more mass in summer. CONCLUSIONS/SIGNIFICANCE: This study provides evidence that behavioural responses to temperature have important consequences for seasonal mass change in moose living in the south of their distribution in Norway, and may be a contributing factor to recently observed declines in moose demographic performance. Although the mechanisms that underlie the observed temperature mediated habitat-fitness relationship remain to be tested, physiological state and individual variation in

  7. Behavioural responses to thermal conditions affect seasonal mass change in a heat-sensitive northern ungulate.

    Science.gov (United States)

    van Beest, Floris M; Milner, Jos M

    2013-01-01

    Empirical tests that link temperature-mediated changes in behaviour (activity and resource selection) to individual fitness or condition are currently lacking for endotherms yet may be critical to understanding the effect of climate change on population dynamics. Moose (Alces alces) are thought to suffer from heat stress in all seasons so provide a good biological model to test whether exposure to non-optimal ambient temperatures influence seasonal changes in body mass. Seasonal mass change is an important fitness correlate of large herbivores and affects reproductive success of female moose. Using GPS-collared adult female moose from two populations in southern Norway we quantified individual differences in seasonal activity budget and resource selection patterns as a function of seasonal temperatures thought to induce heat stress in moose. Individual body mass was recorded in early and late winter, and autumn to calculate seasonal mass changes (n = 52 over winter, n = 47 over summer). We found large individual differences in temperature-dependent resource selection patterns as well as within and between season variability in thermoregulatory strategies. As expected, individuals using an optimal strategy, selecting young successional forest (foraging habitat) at low ambient temperatures and mature coniferous forest (thermal shelter) during thermally stressful conditions, lost less mass in winter and gained more mass in summer. This study provides evidence that behavioural responses to temperature have important consequences for seasonal mass change in moose living in the south of their distribution in Norway, and may be a contributing factor to recently observed declines in moose demographic performance. Although the mechanisms that underlie the observed temperature mediated habitat-fitness relationship remain to be tested, physiological state and individual variation in thermal tolerance are likely contributory factors. Climate-related effects on animal

  8. Leaching behaviour of hazardous waste under the impact of different ambient conditions.

    Science.gov (United States)

    Pecorini, Isabella; Baldi, Francesco; Bacchi, Donata; Carnevale, Ennio Antonio; Corti, Andrea

    2017-05-01

    The overall objective of this study is to provide an improved basis for the assessment of the leaching behaviour of waste marked as hazardous partly stabilised (European waste catalogue code 19 03 04 ∗ ). Four samples of hazardous partly stabilised waste were subjected to two leaching tests: up-flow column tests and batch equilibrium tests. The research was carried out in two directions: the first aims at comparing the results of the two experimental setups while the second aims at assessing the impact of different ambient conditions on the leaching behaviour of waste. Concerning this latter objective the effect of mesophilic temperature, mechanical constraints and acid environment were tested through column percolation tests. Results showed no significant differences between batch and column leaching test outcomes when comparing average concentrations calculated at a liquid to solid ratio of 10:1 l kg -1  TS. Among the tested ambient conditions, the presence of an acid environment (pH=4.5) accelerated the leaching process resulting in a higher cumulative released quantity measured on the majority of the investigated polluting substances. On the contrary, the effect of temperature and mechanical constraints seemed to not affect the process showing final contents even lower than values found for the standard test. This result was furthermore confirmed by the application of the principal component analysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Flow behaviour in a CANDU horizontal fuel channel from stagnant subcooled initial conditions

    International Nuclear Information System (INIS)

    Caplan, M.Z.; Gulshani, P.; Holmes, R.W.; Wright, A.C.D.

    1984-01-01

    The flow behaviour in a CANDU primary system with horizontal fuel channels is described following a small inlet header break. With the primary pumps running, emergency coolant injection is in the forward direction so that the channel outlet feeders remain warmer than the inlet thereby promoting forward natural circulation. However, the break force opposes the forward driving force. Should the primary pumps run down after the circuit has refilled, there is a break size for which the natural circulation force is balanced by the break force and channels could, theoretically, stagnate. Result of visualization and of full-size channel tests on channel flow behaviour from an initially stagnant channel condition are discussed. After a channel stagnation, the decay power heats the coolant to saturation. Steam is then formed and the coolant stratifies. The steam expands into the subcooled water in the end fitting in a chugging type of flow regime due to steam condensation. After the end fitting reaches the saturation temperature, steam is able to penetrate into the vertical feeder thereby initiating a large buoyancy induced flow which refills the channel. The duration of stagnation is shown to be sensitive to small asymmetries in the initial conditions. A small initial flow can significantly shorten the occurrence and/or duration of boiling as has been confirmed by reactor experience. (author)

  10. Mechanical Behaviour of Conventional Materials at Experimental Conditions of Deep Drawing Technological Process

    Science.gov (United States)

    Nikolov, N.; Pashkouleva, D.; Kavardzhikov, V.

    2012-09-01

    The paper deals with experimental investigations on the mechanical behaviour of body-centred-cubic (BCC) and face-centred-cubic (FCC)-conventionally structured sheet metalic-metalic materials under stress-strain conditions of a deep drawing process determined by a coefficient close to the limiting one for Steel 08 and punch diameter of 50 mm. The mechanical characteristics of the investigated materials are identified by one-dimensional tension tests. The materials' responses, as results of identical loading conditions, are described by the change of blank sizes and characteristics of the forming processes. The chosen deformation path ensures obtaining a qualitative steel piece and leads to failures of aluminium and brass blanks. The reported results could be useful for investigations and predictions of the mechanical responses of such type metallic structures applying microscopic instrumented observations and numerical simulations.

  11. Behavioural and hormonal aspects of the oestrous cycle in swamp buffaloes reared under temperate conditions

    International Nuclear Information System (INIS)

    Kanai, Y.; Ishikawa, N.; Shimizu, H.

    1990-01-01

    A series of experiments was carried out using a small herd of swamp buffaloes raised in Japan under temperate conditions at 36 deg. N latitude, with a view to determining whether they exhibit peculiar characteristics in their oestrous cycles. The studies on the oestrous behaviour revealed that under adequate feeding and management conditions, buffaloes regularly display oestrous throughout the year, with the cycle length, duration of oestrous and time of ovulation all falling within ranges similar to those reported in cattle. External signs of oestrus were generally less evident, as previously reported. Hormonal analysis showed that there were no remarkable differences between swamp buffaloes and cattle in terms of the secretory patterns of pituitary gonadotrophins and ovarian steroids during the oestrous cycle. (author). 13 refs, 2 figs

  12. Characterization of ash melting behaviour at high temperatures under conditions simulating combustible solid waste gasification.

    Science.gov (United States)

    Niu, Miaomiao; Dong, Qing; Huang, Yaji; Jin, Baosheng; Wang, Hongyan; Gu, Haiming

    2018-05-01

    To achieve high-temperature gasification-melting of combustible solid waste, ash melting behaviour under conditions simulating high-temperature gasification were studied. Raw ash (RA) and gasified ash (GA) were prepared respectively by waste ashing and fluidized bed gasification. Results of microstructure and composition of the two-ash indicated that GA showed a more porous structure and higher content of alkali and alkali earth metals among metallic elements. Higher temperature promoted GA melting and could reach a complete flowing state at about 1250°C. The order of melting rate of GA under different atmospheres was reducing condition > inert condition > oxidizing condition, which might be related to different existing forms of iron during melting and different flux content with atmosphere. Compared to RA, GA showed lower melting activity at the same condition due to the existence of an unconverted carbon and hollow structure. The melting temperature for sufficient melting and separation of GA should be at least 1250°C in this work.

  13. Effects of tailoring ingredients in auditory persuasive health messages on fruit and vegetable intake.

    Science.gov (United States)

    Elbert, Sarah P; Dijkstra, Arie; Rozema, Andrea D

    2017-07-01

    Health messages can be tailored by applying different tailoring ingredients, among which personalisation, feedback and adaptation. This experiment investigated the separate effects of these tailoring ingredients on behaviour in auditory health persuasion. Furthermore, the moderating effect of self-efficacy was assessed. The between-participants design consisted of four conditions. A generic health message served as a control condition; personalisation was applied using the recipient's first name, feedback was given on the personal state, or the message was adapted to the recipient's value. The study consisted of a pre-test questionnaire (measuring fruit and vegetable intake and perceived difficulty of performing these behaviours, indicating self-efficacy), exposure to the auditory message and a follow-up questionnaire measuring fruit and vegetable intake two weeks after message exposure (n = 112). ANCOVAs showed no main effect of condition on either fruit or vegetable intake, but a moderation was found on vegetable intake: When self-efficacy was low, vegetable intake was higher after listening to the personalisation message. No significant differences between the conditions were found when self-efficacy was high. Individuals with low self-efficacy seemed to benefit from incorporating personalisation, but only regarding vegetable consumption. This finding warrants further investigation in tailoring research.

  14. Influence of initial conditions on rod behaviour during boiling crisis phase following a reactivity initiated accident

    International Nuclear Information System (INIS)

    Georgenthum, V.; Sugiyama, T.

    2010-01-01

    In the frame of their research programs on high burn-up fuel safety, the French Institute for Radioprotection and Nuclear Safety (IRSN) and the Japan Atomic Energy Agency (JAEA) performed a large set of tests devoted to the study of PWR fuel rod behavior during Reactivity Initiated Accident (RIA) respectively in the CABRI reactor and in the NSRR reactor. The reactor test conditions are different in terms of coolant nature, temperature and pressure. In the CABRI reactor, tests were performed until now with sodium coolant at 280 Celsius degrees and 3 bar. In the NSRR reactor most of the tests were performed with stagnant water at 20 C. degrees and atmospheric pressure but recently a new high temperature high pressure capsule has been developed which allows to performed tests at up to 280 Celsius degrees and 70 bar. The paper discusses the influence of test conditions on rod behaviour during boiling phase, based on tests results and SCANAIR code calculations. The study shows that when the boiling crisis is reached, the initial inner and outer rod pressure have an essential impact on the clad straining and possible ballooning. The analysis of the different test conditions makes it possible to discriminate the influence of initial conditions on the different phases of the transient and is useful for modelling and code development. (authors)

  15. Fission gas behaviour in UO2 under steady state and transient conditions

    International Nuclear Information System (INIS)

    Zimmermann, H.

    1980-01-01

    Fission gas behaviour in UO 2 is determined by the limited capacity of the fuel to retain fission gas. This capacity depends primarily on temperature, but also on fission rate, pressure loading, and fuel microstructure. Under steady state irradiation conditions fission gas behaviour can be described qualitatively as follows: At the beginning of the irradiation most of the fission gas remains in the grains in irradiation-induced solution. With increasing gas content in the grains the gas transport to the grain boundaries increases, too. The fission gas release from the grain boundaries occurs primarily by interlinkage of inter-granular bubbles. The fission gas release without noticeable fuel swelling during the short-term heating in the LOCA tests and the powdering of the high burnup UO 2 in the annealing tests can only be accounted for by formation of inter-granular separations, which are caused by the fission gas accumulated in the grain boundaries. Besides this short-term effect there are diffusion-controlled long-term effects, such as growth and coalescence of bubbles and formation of inter-connected porosity, which result in time-dependent fission gas release and fuel swelling

  16. The ''THERMOST'' for analysing thermo-structural behaviour of LWR fuel rod under PCI conditions

    International Nuclear Information System (INIS)

    Nuno, H.; Ogawa, S.; Kobayashi, H.

    1983-01-01

    As one of the methods for evaluating the fuel rod performances under power ramping or load following operations, the combined ''FROST'' and ''THERMOST'' system has been developed and being brought into practical use. The former had already been presented at Blackpool Meeting in 1978, and the latter is going to be presented in this paper. The major purpose of the THERMOST is to analyse very detailed thermal and structural fuel behaviours in a rather localized part of fuel rod whereas the FROST deals with whole-rod-wide general performances. The code handles 2-dimensional thermal and structural analyses simultaneously by using finite element method, in axial section wide or in lateral section wide. It consists of a fundamental FEM system of generalized constitution and its surrounding subroutine system which characterizes fuel behaviours such as temperature distribution, thermal expansion, elastoplasticity, creep, cracking, swelling, growth, etc. Thermal analysis is handled by heat conduction and heat transfer elements (6 kinds) and structural analysis by axisymmetric ring and lateral plane elements (6 kinds). Boundary problems such as contact, friction and cracking are treated by gap and crack elements. A sample calculation of PCI performance on a PWR fuel rod under ramping condition is presented with some inpile test data. (author)

  17. The behaviour of a floating water bridge under reduced gravity conditions

    Science.gov (United States)

    Fuchs, Elmar C.; Agostinho, Luewton L. F.; Wexler, Adam; Wagterveld, R. Martijn; Tuinstra, Jan; Woisetschläger, Jakob

    2011-01-01

    When high voltage is applied to pure water filled into two beakers close to each other, a connection forms spontaneously, giving the impression of a floating water bridge (Armstrong 1893 The Electrical Engineer pp 154-45, Uhlig W 2005 personal communication, Fuchs et al 2007 J. Phys. D: Appl. Phys. 40 6112-4, Fuchs et al 2008 J. Phys. D: Appl. Phys. 41 185502, Fuchs et al 2009 J. Phys. D: Appl. Phys. 42 065502, Fuchs et al 2010 J. Phys. D: Appl. Phys. 43 105502, Woisetschläger et al 2010 Exp. Fluids 48 121-31, Nishiumi and Honda 2009 Res. Lett. Phys. Chem. 2009 371650). This phenomenon is of special interest, since it comprises a number of phenomena currently tackled in modern water science. In this work, the behaviour of this phenomenon under reduced gravity conditions during a parabolic flight is presented by the means of high speed imaging with fringe projection. An analysis of the behaviour is presented and compared with theoretical considerations.

  18. 'THERMOST' for analysing thermo-structural behaviour of LWR fuel rods under PCI conditions

    International Nuclear Information System (INIS)

    Nuno, H.; Ogawa, S.; Kobayashi, H.

    1983-01-01

    As a method for evaluating fuel rod performance under power ramping or load following operations, the combined FROST/ THERMOST system has been developed and brought into practical use. FROST was presented at the IAEA Blackpool Meeting in 1978, and THERMOST is the subject of this paper. The major purpose of THERMOST is to analyse very detailed thermal and structural fuel behaviour in a rather localised part of the fuel rod whereas FROST deals with whole rod general performance. The code handles two-dimensional thermal and structural analyses simultaneously by using a finite element method, in axial section or in lateral section. It consists of a fundamental FEM system of generalised constitution, and a surrounding subroutine system which characterises fuel behaviour, such as temperature distribution, thermal expansion, elastoplasticity, creep, cracking, swelling, growth, etc. Thermal analysis is handled by heat conduction and heat transfer element (six kinds), and structural analysis by axisymmetric ring and lateral plane element (six kinds). Boundary problems such as contact, friction and cracking are treated by gap and crack elements. A sample calculation of PCI performance on a PWR fuel rod under ramping conditions is presented with some in-pile test data. (author)

  19. The behaviour of a floating water bridge under reduced gravity conditions

    International Nuclear Information System (INIS)

    Fuchs, Elmar C; Agostinho, Luewton L F; Wexler, Adam; Wagterveld, R Martijn; Tuinstra, Jan; Woisetschlaeger, Jakob

    2011-01-01

    When high voltage is applied to pure water filled into two beakers close to each other, a connection forms spontaneously, giving the impression of a floating water bridge (Armstrong 1893 The Electrical Engineer pp 154-45, Uhlig W 2005 personal communication, Fuchs et al 2007 J. Phys. D: Appl. Phys. 40 6112-4, Fuchs et al 2008 J. Phys. D: Appl. Phys. 41 185502, Fuchs et al 2009 J. Phys. D: Appl. Phys. 42 065502, Fuchs et al 2010 J. Phys. D: Appl. Phys. 43 105502, Woisetschlaeger et al 2010 Exp. Fluids 48 121-31, Nishiumi and Honda 2009 Res. Lett. Phys. Chem. 2009 371650). This phenomenon is of special interest, since it comprises a number of phenomena currently tackled in modern water science. In this work, the behaviour of this phenomenon under reduced gravity conditions during a parabolic flight is presented by the means of high speed imaging with fringe projection. An analysis of the behaviour is presented and compared with theoretical considerations.

  20. The behaviour of a floating water bridge under reduced gravity conditions

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, Elmar C; Agostinho, Luewton L F; Wexler, Adam; Wagterveld, R Martijn; Tuinstra, Jan [Wetsus, Center of Excellence for Sustainable Water Technology, Agora 1, 8900 CC Leeuwarden (Netherlands); Woisetschlaeger, Jakob, E-mail: elmar.fuchs@wetsus.nl [Institute for Thermal Turbomachinery and Machine Dynamics, Graz University of Technology, Inffeldgasse 25A, Graz (Austria)

    2011-01-19

    When high voltage is applied to pure water filled into two beakers close to each other, a connection forms spontaneously, giving the impression of a floating water bridge (Armstrong 1893 The Electrical Engineer pp 154-45, Uhlig W 2005 personal communication, Fuchs et al 2007 J. Phys. D: Appl. Phys. 40 6112-4, Fuchs et al 2008 J. Phys. D: Appl. Phys. 41 185502, Fuchs et al 2009 J. Phys. D: Appl. Phys. 42 065502, Fuchs et al 2010 J. Phys. D: Appl. Phys. 43 105502, Woisetschlaeger et al 2010 Exp. Fluids 48 121-31, Nishiumi and Honda 2009 Res. Lett. Phys. Chem. 2009 371650). This phenomenon is of special interest, since it comprises a number of phenomena currently tackled in modern water science. In this work, the behaviour of this phenomenon under reduced gravity conditions during a parabolic flight is presented by the means of high speed imaging with fringe projection. An analysis of the behaviour is presented and compared with theoretical considerations.

  1. Relationships between individual behaviour and morphometry under different experimental conditions of temperature and feeding in glass eels (Anguilla anguilla

    Directory of Open Access Journals (Sweden)

    A. Bardonnet

    2008-01-01

    Full Text Available After Anguilla anguilla larvae reach the European coast, metamorphosing glass eels exhibit an estuarine migration phase and can potentially colonize the continental area. Associated behaviours to upstream movement in estuary and river basin differ strongly: passive tidal transport in estuary, active swimming beyond the upstream tidal limit. Moreover, the migratory behaviour may shift towards a density-dependent dispersal beyond this limit. A positive relationship has previously been established between glass eels’ body condition and migratory behaviour in estuary and also higher in the river basin. An experiment was settled to test for the density-dependent versus migratory behaviour under controlled conditions. The relationships between some behaviours (swimming, grouping, feeding, and aggressiveness and body condition was investigated at the individual level. Two controlled factors were crossed, leading to four combinations of high and low levels of food and temperature. The high level of food led to a lesser loss in body condition. Swimming activity was positively related to initial body condition and loss in body condition, but these two variables were not related to aggressiveness. We conclude that the density-dependent dispersal hypothesis was not reinforced by these present results.

  2. Relationships between individual behaviour and morphometry under different experimental conditions of temperature and feeding in glass eels (Anguilla anguilla

    Directory of Open Access Journals (Sweden)

    Bardonnet A.

    2009-02-01

    Full Text Available After Anguilla anguilla larvae reach the European coast, metamorphosing glass eels exhibit an estuarine migration phase and can potentially colonize the continental area. Associated behaviours to upstream movement in estuary and river basin differ strongly: passive tidal transport in estuary, active swimming beyond the upstream tidal limit. Moreover, the migratory behaviour may shift towards a density-dependent dispersal beyond this limit. A positive relationship has previously been established between glass eels’ body condition and migratory behaviour in estuary and also higher in the river basin. An experiment was settled to test for the density-dependent versus migratory behaviour under controlled conditions. The relationships between some behaviours (swimming, grouping, feeding, and aggressiveness and body condition was investigated at the individual level. Two controlled factors were crossed, leading to four combinations of high and low levels of food and temperature. The high level of food led to a lesser loss in body condition. Swimming activity was positively related to initial body condition and loss in body condition, but these two variables were not related to aggressiveness. We conclude that the density-dependent dispersal hypothesis was not reinforced by these present results.

  3. Investigation into the behaviour of concrete anchored diaphragm walls under earthquake condition

    International Nuclear Information System (INIS)

    Saba, H. R.; Rahaii, A. R.

    2003-01-01

    Diaphragm walls are frequently used in civil Engineering projects. Considering the variety and important volume of consumed materials (concrete, anchors and soil), one of the important factors for design and construction of these walls, are their behaviour under different executive, and loading conditions. In this paper, various models of concrete diaphragms with different number of anchors and soil parameters under static and dynamic loading have been investigated using finite element method with nonlinear models. Results including the internal forces in diaphragm walls, variation of forces in the anchors, shape of the sliding surface and variation of pressure in soil are obtained and compared. An experimental tool with suitable measurement systems for determining the pressure and internal forces was designed and realised. Also with similitude and dimensional analyses, diaphragms with different number of anchors were built and set on the shaking table test and experimented under different accelograms. Finally results of nonlinear dynamic analysis were compared with experimental results

  4. A Gamification Model to Encourage Positive Healthcare Behaviours in Young People with Long Term Conditions

    Directory of Open Access Journals (Sweden)

    Andrew S. Wilson

    2013-05-01

    Full Text Available Young people living with long term conditions will eventually have to transfer their care to the adult setting. Failure to plan and coordinate this has been associated with poorer health outcomes and disruption to their care. Transition planning encourages both health literacy and health promoting behaviours in an age and developmentally appropriate way. In order to gauge the attainment of these skills the Birmingham Children’s Hospital Adolescent Rheumatology Team (UK have developed a series of transitional care checklists. This paper focuses on discussing how the application of gamification (using game mechanics in non-game contexts to these checklists could improve the engagement of young people in managing their self-care and provide a mechanism for doctors to quantifying the acquisition of these skills.

  5. The behaviour of a vehicle’s suspension system on dynamic testing conditions

    Science.gov (United States)

    Mihon, L.; Lontiş, N.; Deac, S.

    2018-01-01

    The paper presents a car suspension’s behaviour on dynamic testing conditions through theoretical and mathematical simulation on specific model, on the single traction wheel, according to the real vehicle and by experiment on the test bench by reproducing the road’s geometry and vehicle’s speed and measuring the acceleration and damping response of the suspension system on that wheel. There are taking in consideration also the geometry and properties of the tyre-wheel model and physical wheel’s properties. The results are important due to the suspension’s model properties which allows to extend the theory and applications to the whole vehicle for improving the vehicle’s dynamics.

  6. Anisotropic Behaviour of Opalinus Clay Through Consolidated and Drained Triaxial Testing in Saturated Conditions

    Science.gov (United States)

    Favero, Valentina; Ferrari, Alessio; Laloui, Lyesse

    2018-05-01

    This paper investigates the anisotropic hydro-mechanical behaviour of Opalinus Clay shale, the host material currently being considered for the construction of a nuclear waste repository in Switzerland. Consolidated and drained triaxial tests on Opalinus Clay from the Mont Terri URL have been conducted in order to derive information on its strength and stiffness properties. Opalinus Clay specimens were tested both parallel to bedding (P-specimens) and perpendicular to bedding (S-specimens). The considered effective confining stress range (from 2 to 12 MPa) has been selected in order to reproduce possible in situ stress conditions for the repository. In this work, particular attention has been paid to the experimental procedure in order to ensure consolidated conditions and avoid generation of unwanted excess pore water pressure during drained shearing. The Skempton B parameter has been determined for all the tested specimens in order to ensure saturation. Both single-stage and multistage triaxial testing procedures were adopted in the experimental campaign. The results of the triaxial tests highlight an anisotropic elastic response of Opalinus Clay: S-specimens present a more compliant behaviour than P-specimens. The values of the Young modulus are found to increase with the increase in mean effective stress. The analysis of the peak and ultimate shear strength results reveals that the material behaves in a similar manner regardless of the considered direction of loading (P and S directions) with respect to the bedding orientation. Peak and ultimate failure envelopes for Opalinus Clay were derived for the investigated stress range.

  7. Nuclear Fuel Behaviour in Loss-of-coolant Accident (LOCA) Conditions

    International Nuclear Information System (INIS)

    Pettersson, Kjell; Chung, Haijung; ); Billone, Michael; Fuketa, Toyoshi; Nagase, Fumihisa; Grandjean, Claude; Hache, George; Papin, Joelle; Heins, Lothar; Hozer, Zoltan; In de Betou, Jan; Kelppe, Seppo; Mayer, Ralph; Scott, Harold; Voglewede, John; Sonnenburg, Heinz; Sunder, Sham; Valach, Mojmir; Vrtilkova, Vera; Waeckel, Nicolas; Wiesenack, Wolfgang; Zimmermann, Martin

    2009-01-01

    The NEA Working Group on Fuel Safety (WGFS) is tasked with advancing the current understanding of fuel safety issues by assessing the technical basis for current safety criteria and their applicability to high burn-up and to new fuel designs and materials. The group aims at facilitating international convergence in this area, including as regards experimental approaches and interpretation and the use of experimental data relevant for safety. In 1986, a working group of the NEA Committee on the Safety of Nuclear Installations (CSNI) issued a state-of-the-art report on water reactor fuel behaviour in design-basis accident (DBA) conditions. The 1986 report was limited to the oxidation, embrittlement and deformation of pressurised water reactor (PWR) fuel in a loss-of-coolant accident (LOCA). Since then, considerable experimental and analytical work has been performed, which has led to a broader and deeper understanding of LOCA-related phenomena. Further, new cladding alloys have been produced, which might behave differently than the previously used Zircaloy-4, both under normal operating conditions and during transients. Compared with 20 years ago, fuel burn-up has been significantly increased, which requires extending the LOCA database in order to cover the high burnup range. There was also a clear need to address LOCA performance for reactor types other than PWRs. The present report has been prepared by the WGFS and covers the following technical aspects: - Description of different LOCA scenarios for major types of reactors: BWRs, PWRs, VVERs and to a lesser extent CANDUs. - LOCA phenomena: ballooning, burst, oxidation, fuel relocation and possible fracture at quench. - Details of high-temperature oxidation behaviour of various cladding materials. - Metallurgical phase change, effect of hydrogen and oxygen on residual cladding ductility. - Methods for LOCA testing, for example two-sided oxidation and ring compression for ductility, and integral quench test for

  8. Review of experimental data for modelling LWR fuel cladding behaviour under loss of coolant accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Massih, Ali R. [Quantum Technologies AB, Uppsala Science Park (Sweden)

    2007-02-15

    Extensive range of experiments has been conducted in the past to quantitatively identify and understand the behaviour of fuel rod under loss-of-coolant accident (LOCA) conditions in light water reactors (LWRs). The obtained experimental data provide the basis for the current emergency core cooling system acceptance criteria under LOCA conditions for LWRs. The results of recent experiments indicate that the cladding alloy composition and high burnup effects influence LOCA acceptance criteria margins. In this report, we review some past important and recent experimental results. We first discuss the background to acceptance criteria for LOCA, namely, clad embrittlement phenomenology, clad embrittlement criteria (limitations on maximum clad oxidation and peak clad temperature) and the experimental bases for the criteria. Two broad kinds of test have been carried out under LOCA conditions: (i) Separate effect tests to study clad oxidation, clad deformation and rupture, and zirconium alloy allotropic phase transition during LOCA. (ii) Integral LOCA tests, in which the entire LOCA sequence is simulated on a single rod or a multi-rod array in a fuel bundle, in laboratory or in a tests and results are discussed and empirical correlations deduced from these tests and quantitative models are conferred. In particular, the impact of niobium in zirconium base clad and hydrogen content of the clad on allotropic phase transformation during LOCA and also the burst stress are discussed. We review some recent LOCA integral test results with emphasis on thermal shock tests. Finally, suggestions for modelling and further evaluation of certain experimental results are made.

  9. Betel nut chewing behaviour and its association with oral mucosal lesions and conditions in Ghaziabad, India.

    Science.gov (United States)

    Prasad, Sumanth; Anand, Richa; Dhingra, Chandan

    2014-01-01

    To assess the practices and behaviour among Betel nut users in Ghaziabad and to detect the clinically associated oral mucosal lesions and conditions. A community-based survey was conducted in Ghaziabad among 332 betel nut users. Data on betel nut use was obtained through a self-administered questionnaire. Oral mucosal lesions and conditions were recorded using WHO criteria. Out of 332 betel nut users, 32.8% consumed Gutkha. 62.3% users used betel nut with tobacco. Most of the study population started chewing betel nut because of peer pressure and the habit started at the workplace or school. A majority found that there was no physical discomfort due to the habit. The significant oral diseases detected were oral leukoplakia in 11.7% and oral submucous fibrosis in 6.1% of individuals. The findings of the present study revealed that 74.7% of the participants were current chewers. 30.4% of all participants had oral mucosal lesions and conditions.

  10. Behavioural and cognitive sex/gender differences in autism spectrum condition and typically developing males and females.

    Science.gov (United States)

    Hull, Laura; Mandy, William; Petrides, K V

    2017-08-01

    Studies assessing sex/gender differences in autism spectrum conditions often fail to include typically developing control groups. It is, therefore, unclear whether observed sex/gender differences reflect those found in the general population or are particular to autism spectrum conditions. A systematic search identified articles comparing behavioural and cognitive characteristics in males and females with and without an autism spectrum condition diagnosis. A total of 13 studies were included in meta-analyses of sex/gender differences in core autism spectrum condition symptoms (social/communication impairments and restricted/repetitive behaviours and interests) and intelligence quotient. A total of 20 studies were included in a qualitative review of sex/gender differences in additional autism spectrum condition symptoms. For core traits and intelligence quotient, sex/gender differences were comparable in autism spectrum conditions and typical samples. Some additional autism spectrum condition symptoms displayed different patterns of sex/gender differences in autism spectrum conditions and typically developing groups, including measures of executive function, empathising and systemising traits, internalising and externalising problems and play behaviours. Individuals with autism spectrum conditions display typical sex/gender differences in core autism spectrum condition traits, suggesting that diagnostic criteria based on these symptoms should take into account typical sex/gender differences. However, awareness of associated autism spectrum condition symptoms should include the possibility of different male and female phenotypes, to ensure those who do not fit the 'typical' autism spectrum condition presentation are not missed.

  11. Effects of Multiple Contexts and Context Similarity on the Renewal of Extinguished Conditioned Behaviour in an ABA Design with Humans

    Science.gov (United States)

    Balooch, Siavash Bandarian; Neumann, David L.

    2011-01-01

    The ABA renewal procedure involves pairing a conditional stimulus (CS) and an unconditional stimulus (US) in one context (A), presenting extinction trials of the CS alone in a second context (B), and nonreinforced test trials of the CS in the acquisition context (A). The renewal of extinguished conditioned behaviour is observed during test. The…

  12. Exposures to Conditioned Flavours with Different Hedonic Values Induce Contrasted Behavioural and Brain Responses in Pigs

    Science.gov (United States)

    Clouard, Caroline; Jouhanneau, Mélanie; Meunier-Salaün, Marie-Christine; Malbert, Charles-Henri; Val-Laillet, David

    2012-01-01

    This study investigated the behavioural and brain responses towards conditioned flavours with different hedonic values in juvenile pigs. Twelve 30-kg pigs were given four three-day conditioning sessions: they received three different flavoured meals paired with intraduodenal (i.d.) infusions of 15% glucose (FGlu), lithium chloride (FLiCl), or saline (control treatment, FNaCl). One and five weeks later, the animals were subjected to three two-choice feeding tests without reinforcement to check the acquisition of a conditioned flavour preference or aversion. In between, the anaesthetised pigs were subjected to three 18FDG PET brain imaging coupled with an olfactogustatory stimulation with the conditioned flavours. During conditioning, the pigs spent more time lying inactive, and investigated their environment less after the FLiCl than the FNaCl or FGlu meals. During the two-choice tests performed one and five weeks later, the FNaCl and FGlu foods were significantly preferred over the FLICl food even in the absence of i.d. infusions. Surprisingly, the FNaCl food was also preferred over the FGlu food during the first test only, suggesting that, while LiCl i.d. infusions led to a strong flavour aversion, glucose infusions failed to induce flavour preference. As for brain imaging results, exposure to aversive or less preferred flavours triggered global deactivation of the prefrontal cortex, specific activation of the posterior cingulate cortex, as well as asymmetric brain responses in the basal nuclei and the temporal gyrus. In conclusion, postingestive visceral stimuli can modulate the flavour/food hedonism and further feeding choices. Exposure to flavours with different hedonic values induced metabolism differences in neural circuits known to be involved in humans in the characterization of food palatability, feeding motivation, reward expectation, and more generally in the regulation of food intake. PMID:22685528

  13. Fatigue and Creep Crack Propagation behaviour of Alloy 617 in the Annealed and Aged Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Julian K. Benz; Richard N. Wright

    2013-10-01

    The crack propagation behaviour of Alloy 617 was studied under various conditions. Elevated temperature fatigue and creep-fatigue crack growth experiments were conducted at 650 and 800 degrees C under constant stress intensity (triangle K) conditions and triangular or trapezoidal waveforms at various frequencies on as-received, aged, and carburized material. Environmental conditions included both laboratory air and characteristic VHTR impure helium. As-received Alloy 617 displayed an increase in the crack growth rate (da/dN) as the frequency was decreased in air which indicated a time-dependent contribution component in fatigue crack propagation. Material aged at 650°C did not display any influence on the fatigue crack growth rates nor the increasing trend of crack growth rate with decreasing frequency even though significant microstructural evolution, including y’ (Ni3Al) after short times, occurred during aging. In contrast, carburized Alloy 617 showed an increase in crack growth rates at all frequencies tested compared to the material in the standard annealed condition. Crack growth studies under quasi-constant K (i.e. creep) conditions were also completed at 650 degrees C and a stress intensity of K = 40 MPa9 (square root)m. The results indicate that crack growth is primarily intergranular and increased creep crack growth rates exist in the impure helium environment when compared to the results in laboratory air. Furthermore, the propagation rates (da/dt) continually increased for the duration of the creep crack growth either due to material aging or evolution of a crack tip creep zone. Finally, fatigue crack propagation tests at 800 degrees C on annealed Alloy 617 indicated that crack propagation rates were higher in air than impure helium at the largest frequencies and lowest stress intensities. The rates in helium, however, eventually surpass the rates in air as the frequency is reduced and the stress intensity is decreased which was not observed at 650

  14. Exposures to conditioned flavours with different hedonic values induce contrasted behavioural and brain responses in pigs.

    Directory of Open Access Journals (Sweden)

    Caroline Clouard

    Full Text Available This study investigated the behavioural and brain responses towards conditioned flavours with different hedonic values in juvenile pigs. Twelve 30-kg pigs were given four three-day conditioning sessions: they received three different flavoured meals paired with intraduodenal (i.d. infusions of 15% glucose (F(Glu, lithium chloride (F(LiCl, or saline (control treatment, F(NaCl. One and five weeks later, the animals were subjected to three two-choice feeding tests without reinforcement to check the acquisition of a conditioned flavour preference or aversion. In between, the anaesthetised pigs were subjected to three (18FDG PET brain imaging coupled with an olfactogustatory stimulation with the conditioned flavours. During conditioning, the pigs spent more time lying inactive, and investigated their environment less after the F(LiCl than the F(NaCl or F(Glu meals. During the two-choice tests performed one and five weeks later, the F(NaCl and F(Glu foods were significantly preferred over the F(LICl food even in the absence of i.d. infusions. Surprisingly, the F(NaCl food was also preferred over the F(Glu food during the first test only, suggesting that, while LiCl i.d. infusions led to a strong flavour aversion, glucose infusions failed to induce flavour preference. As for brain imaging results, exposure to aversive or less preferred flavours triggered global deactivation of the prefrontal cortex, specific activation of the posterior cingulate cortex, as well as asymmetric brain responses in the basal nuclei and the temporal gyrus. In conclusion, postingestive visceral stimuli can modulate the flavour/food hedonism and further feeding choices. Exposure to flavours with different hedonic values induced metabolism differences in neural circuits known to be involved in humans in the characterization of food palatability, feeding motivation, reward expectation, and more generally in the regulation of food intake.

  15. Exposures to conditioned flavours with different hedonic values induce contrasted behavioural and brain responses in pigs.

    Science.gov (United States)

    Clouard, Caroline; Jouhanneau, Mélanie; Meunier-Salaün, Marie-Christine; Malbert, Charles-Henri; Val-Laillet, David

    2012-01-01

    This study investigated the behavioural and brain responses towards conditioned flavours with different hedonic values in juvenile pigs. Twelve 30-kg pigs were given four three-day conditioning sessions: they received three different flavoured meals paired with intraduodenal (i.d.) infusions of 15% glucose (F(Glu)), lithium chloride (F(LiCl)), or saline (control treatment, F(NaCl)). One and five weeks later, the animals were subjected to three two-choice feeding tests without reinforcement to check the acquisition of a conditioned flavour preference or aversion. In between, the anaesthetised pigs were subjected to three (18)FDG PET brain imaging coupled with an olfactogustatory stimulation with the conditioned flavours. During conditioning, the pigs spent more time lying inactive, and investigated their environment less after the F(LiCl) than the F(NaCl) or F(Glu) meals. During the two-choice tests performed one and five weeks later, the F(NaCl) and F(Glu) foods were significantly preferred over the F(LICl) food even in the absence of i.d. infusions. Surprisingly, the F(NaCl) food was also preferred over the F(Glu) food during the first test only, suggesting that, while LiCl i.d. infusions led to a strong flavour aversion, glucose infusions failed to induce flavour preference. As for brain imaging results, exposure to aversive or less preferred flavours triggered global deactivation of the prefrontal cortex, specific activation of the posterior cingulate cortex, as well as asymmetric brain responses in the basal nuclei and the temporal gyrus. In conclusion, postingestive visceral stimuli can modulate the flavour/food hedonism and further feeding choices. Exposure to flavours with different hedonic values induced metabolism differences in neural circuits known to be involved in humans in the characterization of food palatability, feeding motivation, reward expectation, and more generally in the regulation of food intake.

  16. Corrosion behaviour of hyper duplex stainless steel in various metallurgical conditions for sea water cooled condensers

    International Nuclear Information System (INIS)

    Singh, Umesh Pratap; Kain, Vivekanand; Chandra, Kamlesh

    2011-01-01

    The sea water cooled condensers have to resist severe corrosion as marine environment is the most corrosive natural environment. Copper alloys are being phased out due to difficulties in water chemistry control and Titanium base alloys are extremely expensive. Austenitic stainless steels (SS) remain prone to localized corrosion in marine environments hence not suitable. These heat exchangers operate at temperatures not exceeding 50 deg C and at very low pressures. The tubes of these heat exchangers are joined to the carbon steel tube sheets by roll expansion or by roll expansion followed by seam welding. These conditions are expected to affect the localized corrosion resistance of the tube in roll joined region due to cold working and in the tube-tube sheet welded joint due to thermal effects of welding. In this study, the localized corrosion behaviour of a Hyper Duplex Stainless Steel (HDSS) has been evaluated, and compared with other materials e.g. types 304L SS, 316L SS, Duplex SS 2205, Titanium grade - 2, and Al Brass. The evaluation is done in three metallurgical conditions (a) as received, (b) cold rolled and (c) welded condition in synthetic sea water at room temperature and at 50 deg C to assess the resistance to crevice, pitting and stress corrosion cracking using standard ASTM exposure and electrochemical techniques. The results provide comparative assessment of these alloys and show their susceptibility in the three metallurgical conditions as encountered in condensers. Hyper-duplex SS has been shown to be highly resistant in sea water for the condenser tubing application. (author)

  17. Modelling the effects of environmental conditions on the acoustic occurrence and behaviour of Antarctic blue whales.

    Directory of Open Access Journals (Sweden)

    Fannie W Shabangu

    Full Text Available Harvested to perilously low numbers by commercial whaling during the past century, the large scale response of Antarctic blue whales Balaenoptera musculus intermedia to environmental variability is poorly understood. This study uses acoustic data collected from 586 sonobuoys deployed in the austral summers of 1997 through 2009, south of 38°S, coupled with visual observations of blue whales during the IWC SOWER line-transect surveys. The characteristic Z-call and D-call of Antarctic blue whales were detected using an automated detection template and visual verification method. Using a random forest model, we showed the environmental preferences pattern, spatial occurrence and acoustic behaviour of Antarctic blue whales. Distance to the southern boundary of the Antarctic Circumpolar Current (SBACC, latitude and distance from the nearest Antarctic shores were the main geographic predictors of blue whale call occurrence. Satellite-derived sea surface height, sea surface temperature, and productivity (chlorophyll-a were the most important environmental predictors of blue whale call occurrence. Call rates of D-calls were strongly predicted by the location of the SBACC, latitude and visually detected number of whales in an area while call rates of Z-call were predicted by the SBACC, latitude and longitude. Satellite-derived sea surface height, wind stress, wind direction, water depth, sea surface temperatures, chlorophyll-a and wind speed were important environmental predictors of blue whale call rates in the Southern Ocean. Blue whale call occurrence and call rates varied significantly in response to inter-annual and long term variability of those environmental predictors. Our results identify the response of Antarctic blue whales to inter-annual variability in environmental conditions and highlighted potential suitable habitats for this population. Such emerging knowledge about the acoustic behaviour, environmental and habitat preferences of

  18. Modelling the effects of environmental conditions on the acoustic occurrence and behaviour of Antarctic blue whales.

    Science.gov (United States)

    Shabangu, Fannie W; Yemane, Dawit; Stafford, Kathleen M; Ensor, Paul; Findlay, Ken P

    2017-01-01

    Harvested to perilously low numbers by commercial whaling during the past century, the large scale response of Antarctic blue whales Balaenoptera musculus intermedia to environmental variability is poorly understood. This study uses acoustic data collected from 586 sonobuoys deployed in the austral summers of 1997 through 2009, south of 38°S, coupled with visual observations of blue whales during the IWC SOWER line-transect surveys. The characteristic Z-call and D-call of Antarctic blue whales were detected using an automated detection template and visual verification method. Using a random forest model, we showed the environmental preferences pattern, spatial occurrence and acoustic behaviour of Antarctic blue whales. Distance to the southern boundary of the Antarctic Circumpolar Current (SBACC), latitude and distance from the nearest Antarctic shores were the main geographic predictors of blue whale call occurrence. Satellite-derived sea surface height, sea surface temperature, and productivity (chlorophyll-a) were the most important environmental predictors of blue whale call occurrence. Call rates of D-calls were strongly predicted by the location of the SBACC, latitude and visually detected number of whales in an area while call rates of Z-call were predicted by the SBACC, latitude and longitude. Satellite-derived sea surface height, wind stress, wind direction, water depth, sea surface temperatures, chlorophyll-a and wind speed were important environmental predictors of blue whale call rates in the Southern Ocean. Blue whale call occurrence and call rates varied significantly in response to inter-annual and long term variability of those environmental predictors. Our results identify the response of Antarctic blue whales to inter-annual variability in environmental conditions and highlighted potential suitable habitats for this population. Such emerging knowledge about the acoustic behaviour, environmental and habitat preferences of Antarctic blue whales is

  19. Microstructural characterisation and constitutive behaviour of alloy RR1000 under fatigue and creep-fatigue loading conditions

    International Nuclear Information System (INIS)

    Stoecker, C.; Zimmermann, M.; Christ, H.-J.; Zhan, Z.-L.; Cornet, C.; Zhao, L.G.; Hardy, M.C.; Tong, J.

    2009-01-01

    Mechanical behaviour of a nickel-based superalloy, RR1000, has been investigated at 650 deg. C under cyclic and dwell loading conditions. The microstructural characteristics of the alloy have been studied using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and the distribution patterns of the dislocations and slip planes have been compared between samples tested under fatigue and creep-fatigue loading conditions. Constitutive behaviour of the alloy was described by a unified constitutive model, where both cyclic plastic and viscoplastic strains were represented by one inelastic strain. The results show that the precipitation state is very stable at 650 deg. C and only minor differences exist in the dislocation arrangements formed under pure fatigue and combined creep and fatigue conditions. Hence, a unified constitutive model seems to be justified in describing and predicting the constitutive behaviour in both cases.

  20. Behavioural and cognitive sex/gender differences in autism spectrum condition and typically developing males and females

    OpenAIRE

    Hull, L.; Mandy, W.; Petrides, K.

    2017-01-01

    Studies assessing sex/gender differences in autism spectrum conditions often fail to include typically developing control groups. It is, therefore, unclear whether observed sex/gender differences reflect those found in the general population or are particular to autism spectrum conditions. A systematic search identified articles comparing behavioural and cognitive characteristics in males and females with and without an autism spectrum condition diagnosis. A total of 13 studies were included ...

  1. Effects of microplastic exposure on the body condition and behaviour of planktivorous reef fish (Acanthochromis polyacanthus).

    Science.gov (United States)

    Critchell, Kay; Hoogenboom, Mia O

    2018-01-01

    The effect of a pollutant on the base of the food web can have knock-on effects for trophic structure and ecosystem functioning. In this study we assess the effect of microplastic exposure on juveniles of a planktivorous fish (Acanthochromis polyacanthus), a species that is widespread and abundant on Indo-Pacific coral reefs. Under five different plastic concentration treatments, with plastics the same size as the natural food particles (mean 2mm diameter), there was no significant effect of plastic exposure on fish growth, body condition or behaviour. The amount of plastics found in the gastro-intestinal (GI) tract was low, with a range of one to eight particles remaining in the gut of individual fish at the end of a 6-week plastic-exposure period, suggesting that these fish are able to detect and avoid ingesting microplastics in this size range. However, in a second experiment the number of plastics in the GI tract vastly increased when plastic particle size was reduced to approximately one quarter the size of the food particles, with a maximum of 2102 small (< 300μm diameter) particles present in the gut of individual fish after a 1-week plastic exposure period. Under conditions where food was replaced by plastic, there was a negative effect on the growth and body condition of the fish. These results suggest plastics could become more of a problem as they break up into smaller size classes, and that environmental changes that lead to a decrease in plankton concentrations combined with microplastic presence is likely have a greater influence on fish populations than microplastic presence alone.

  2. Effects of microplastic exposure on the body condition and behaviour of planktivorous reef fish (Acanthochromis polyacanthus)

    Science.gov (United States)

    Hoogenboom, Mia O.

    2018-01-01

    The effect of a pollutant on the base of the food web can have knock-on effects for trophic structure and ecosystem functioning. In this study we assess the effect of microplastic exposure on juveniles of a planktivorous fish (Acanthochromis polyacanthus), a species that is widespread and abundant on Indo-Pacific coral reefs. Under five different plastic concentration treatments, with plastics the same size as the natural food particles (mean 2mm diameter), there was no significant effect of plastic exposure on fish growth, body condition or behaviour. The amount of plastics found in the gastro-intestinal (GI) tract was low, with a range of one to eight particles remaining in the gut of individual fish at the end of a 6-week plastic-exposure period, suggesting that these fish are able to detect and avoid ingesting microplastics in this size range. However, in a second experiment the number of plastics in the GI tract vastly increased when plastic particle size was reduced to approximately one quarter the size of the food particles, with a maximum of 2102 small (plastic exposure period. Under conditions where food was replaced by plastic, there was a negative effect on the growth and body condition of the fish. These results suggest plastics could become more of a problem as they break up into smaller size classes, and that environmental changes that lead to a decrease in plankton concentrations combined with microplastic presence is likely have a greater influence on fish populations than microplastic presence alone. PMID:29494635

  3. Tailored Porous Materials

    Energy Technology Data Exchange (ETDEWEB)

    BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

    1999-11-09

    Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

  4. Fatigue behaviour and crack growth of ferritic steel under environmental conditions

    International Nuclear Information System (INIS)

    Herter, K.H.; Schuler, X.; Weissenberg, T.

    2012-01-01

    The assessment of fatigue and cyclic crack growth behaviour of safety relevant components is of importance for the ageing management with regard to safety and reliability. For cyclic stress evaluation different codes and standards provide fatigue analysis procedures to be performed considering the various mechanical and thermal loading histories and geometric complexities of the components. For the fatigue design curves used as a limiting criteria the influence of different factors like e.g. environment, surface finish and temperature must be taken into consideration in an appropriate way. Fatigue tests were performed in the low cycle fatigue (LCF) und high cycle fatigue (HCF) regime with low alloy steels as well as with Nb- and Ti-stabilized German austenitic stainless steels in air and high temperature (HT) boiling water reactor environment to extend the state of knowledge of environmentally assisted fatigue (EAF) as it can occur in boiling water reactor (BWR) plants. Using the reactor pressure vessel (RPV) steel 22NiMoCr3-7 experimental data were developed to verify the influence of BWR coolant environment (high purity water as well as sulphate containing water with 90 ppb SO 4 at a test temperature of 240 C and an oxygen content of 400 ppb) on the fatigue life and to extend the basis for a reliable estimation of the remaining service life of reactor components. Corresponding experiments in air were performed to establish reference data to determine the environmental correction factor F en accounting for the environment. The experimental results are compared with international available mean data curves, the new design curves and on the basis of the environmental factor F en . Furthermore the behaviour of steel 22NiMoCr3-7 in oxygenated high temperature water under transient loading conditions was investigated with respect to crack initiation and cyclic crack growth. In this process the stress state of the specimen and the chemical composition of the high

  5. Effect of environment on Pekin duck behaviour and its correlation with body condition on commercial farms in the UK.

    Science.gov (United States)

    Jones, T A; Dawkins, M S

    2010-06-01

    1. Forty-six flocks of commercially-reared Pekin ducks were studied to determine the effects of housing system and environment on the behaviour of farmed ducks and its correlation with physical condition. Houses differed predominantly in their ventilation, drinking, feeding and brooding systems, and were indicative of systems currently in use in the UK. 2. At 41 d of age ducks spent 15% of the time feeding, 67% drinking, 42% rooting and 155% dry preening. They spent large amounts of time relatively inactive, 435%, or performing comfort behaviours, 17%. On average 46% of their time was spent walking and only 18% wet preening. 3. A greater proportion of the maximum number of ducks able to use the drinker at any one time used the trough; nipple use was least and Plasson use intermediate. The proportion of ducks wet preening was not affected by drinker type but increased with increasing drinker space (mm/bird). 4. Duck behaviour was little affected by commercial production system and was influenced more by environment, age and physical condition. Activity at an older age incorporated more of the behaviours associated with thermal comfort (panting) and maintenance of plumage condition (dry and wet preening). These behaviours increased with increasing temperature, relative humidity and atmospheric ammonia. Poor walking ability was correlated to increased frequency of panting, reduced activity at the drinker, and longer resting bouts.

  6. Thermal behaviour of high burnup PWR fuel under different fill gas conditions

    International Nuclear Information System (INIS)

    Tverberg, T.

    2001-01-01

    During its more than 40 years of existence, a large number of experiments have been carried out at the Halden Reactor Project focusing on different aspects related to nuclear reactor fuel. During recent years, the fuels testing program has mainly been focusing on aspects related to high burnup, in particular in terms of fuel thermal performance and fission gas release, and often involving reinstrumentation of commercially irradiated fuel. The paper describes such an experiment where a PWR rod, previously irradiated in a commercial reactor to a burnup of ∼50 MWd/kgUO 2 , was reinstrumented with a fuel central oxide thermocouple and a cladding extensometer together with a high pressure gas flow line, allowing for different fill gas compositions and pressures to be applied. The paper focuses on the thermal behaviour of such LWR rods with emphasis on how different fill gas conditions influence the fuel temperatures and gap conductance. Rod growth rate was also monitored during the irradiation in the Halden reactor. (author)

  7. Determination of pistachio drying behaviour and conditions in a solar drying system

    Energy Technology Data Exchange (ETDEWEB)

    Midilli, Adnan [Karadeniz Technical Univ., Mechanical Engineering Dept., Trabzon (Turkey)

    2001-07-01

    The main object of this study is to determine the drying behaviour and conditions of shelled and unshelled pistachio samples using both solar assisted and open sun drying. For each drying experiment, 100 g each of unshelled and shelled pistachio were used. The least-squares method was applied to find the drying curve equation of pistachio. During the experiments, shelf temperatures, weight loss of pistachio, moisture content of air, and distribution of solar radiation were measured; and presented depending on the drying time. Also, the mass shrinkage ratios of shelled and unshelled pistachio samples were determined, and the experimental uncertainty ratio was calculated as 15-16.5 per cent based on the experimental results. It was deduced that the shelled and unshelled pistachio samples in the solar assisted forced convection dryer were perfectly dried at temperatures of 50{+-}10degC in the time period of 6 h. Whereas, the samples in the open sun drying were not sufficiently dried at temperatures of 28{+-}4degC in the same time period. Hence, it is suggested that the pistachio samples with approximately 29.0 per cent of moisture are dried in the solar assisted convection dryer at 50{+-}10degC of temperature in the time period of approximately 6 h in order to protect from the negative climatic and environmental effects. However, it is not desirable to dry the pistachio samples in the open sun because of greater drying time, dirt, dust and harmful insects. (Author)

  8. Behaviour of rock-like oxide fuels under reactivity-initiated accident conditions

    International Nuclear Information System (INIS)

    Kazuyuki, Kusagaya; Takehiko, Nakamura; Makio, Yoshinaga; Hiroshi, Akie; Toshiyuki, Yamashita; Hiroshi, Uetsuka

    2002-01-01

    Pulse irradiation tests of three types of un-irradiated rock-like oxide (ROX) fuel - yttria-stabilised zirconia (YSZ) single phase, YSZ and spinel (MgAl 2 O 4 ) homogeneous mixture and particle-dispersed YSZ/spinel - were conducted in the Nuclear Safety Research Reactor to investigate the fuel behaviour under reactivity-initiated accident conditions. The ROX fuels failed at fuel volumetric enthalpies above 10 GJ/m 3 , which was comparable to that of un-irradiated UO 2 fuel. The failure mode of the ROX fuels, however, was quite different from that of the UO 2 fuel. The ROX fuels failed with fuel pellet melting and a part of the molten fuel was released out to the surrounding coolant water. In spite of the release, no significant mechanical energy generation due to fuel/coolant thermal interaction was observed in the tested enthalpy range below∼12 GJ/m 3 . The YSZ type and homogenous YSZ/spinel type ROX fuels failed by cladding burst when their temperatures peaked, while the particle-dispersed YSZ/spinel type ROX fuel seemed to have failed by cladding local melting. (author)

  9. Experimental device for investigating the crack growth behaviour of RPV steel under BWR conditions

    International Nuclear Information System (INIS)

    Anders, D.; Ahlf, J.

    1983-01-01

    An experimental device is developed to investigate the crack growth behaviour of RPV steel specimens under service conditions. It will be installed in the experimental power station VAK-Kahl (BWR, 16 MWe). The in pile part is composed of a stable frame with a hydraulically actuated load mechanism, the specimen chain and a measuring instrumentation. The specimen chain, fastened between load mechanism and a lower fixing point at the frame, is made up of five compact tensile specimens (CT40) and the associated connecting links. Specimen strain, crack opening and temperature are measured; for neutron dose monitoring activation wires are disposed. Out of pile, in the reactor hall, the hydraulic loading system is installed. The loading force is generated by a 100 kN-material testing machine; it moves a piston in the control cylinder, which is connected to the loading bellows of the in pile section. The measuring and control equipment and a desk computer serving for data preparation and reduction is placed in the reactor control room. (Auth.)

  10. Speciation, behaviour, and fate of mercury under oxy-fuel combustion conditions.

    Science.gov (United States)

    Córdoba, Patricia; Maroto-Valer, M; Delgado, Miguel Angel; Diego, Ruth; Font, Oriol; Querol, Xavier

    2016-02-01

    The work presented here reports the first study in which the speciation, behaviour and fate of mercury (Hg) have been evaluated under oxy-fuel combustion at the largest oxy-Pulverised Coal Combustion (oxy-PCC) demonstration plant to date during routine operating conditions and partial exhaust flue gas re-circulation to the boiler. The effect of the CO2-rich flue gas re-circulation on Hg has also been evaluated. Results reveal that oxy-PCC operational conditions play a significant role on Hg partitioning and fate because of the continuous CO2-rich flue gas re-circulations to the boiler. Mercury escapes from the cyclone in a gaseous form as Hg(2+) (68%) and it is the prevalent form in the CO2-rich exhaust flue gas (99%) with lower proportions of Hg(0) (1.3%). The overall retention rate for gaseous Hg is around 12%; Hg(0) is more prone to be retained (95%) while Hg(2+) shows a negative efficiency capture for the whole installation. The negative Hg(2+) capture efficiencies are due to the continuous CO2-rich exhaust flue gas recirculation to the boiler with enhanced Hg contents. Calculations revealed that 44mg of Hg were re-circulated to the boiler as a result of 2183 re-circulations of CO2-rich flue gas. Especial attention must be paid to the role of the CO2-rich exhaust flue gas re-circulation to the boiler on the Hg enrichment in Fly Ashes (FAs). Copyright © 2015 Elsevier Inc. All rights reserved.

  11. High Burnup Fuel Behaviour under LOCA Conditions as Observed in Halden Reactor Experiments

    International Nuclear Information System (INIS)

    Kolstad, E.; Wiesenack, W.; Oberlander, B.; Tverberg, T.

    2013-01-01

    In the context of assessing the validity of safety criteria for loss of coolant accidents with high burnup fuel, the OECD Halden Reactor Project has implemented an integral in-pile LOCA test series. In this series, fuel fragmentation and relocation, axial gas communication in high burnup rods as affected by gap closure and fuel- clad bonding, and secondary cladding oxidation and hydriding are of major interest. In addition, the data are being used for code validation as well as model development and verification. So far, nine tests with irradiated fuel segments (burnup 40-92 MW.d.kg -1 ) from PWR, BWR and VVER commercial nuclear power plants have been carried out. The in-pile measurements and the PIE results show a good repeatability of the experiments. The paper describes the experimental setup as well as the principal features and main results of these tests. Fuel fragmentation and relocation have occurred to varying degrees in these tests. The paper compares the conditions leading to the presence or absence of fuel fragmentation, e.g., burnup and loss of constraint. Axial gas flow is an important driving force for clad ballooning, fuel relocation and fuel expulsion. The experiments have provided evidence that such gas flow can be impeded in high burnup fuel with a potential impact on the ballooning and fuel dispersal. Although the results of the Halden LOCA tests are, to some extent, amplified by conditions and features deliberately introduced into the test series, the fuel behaviour identified in the Halden tests has an impact on the safety assessment of high burnup fuel and should give rise to improvements of the predictive capabilities of LOCA modelling codes. (author)

  12. Effect of Shading on Physiological, Biochemical and Behaviour Changes in Crossbred Calves Under Hot Climatic Conditions

    International Nuclear Information System (INIS)

    Teama, F.E.I.; Gad, A.E.; El-Tarabany, A.A.

    2012-01-01

    The purpose of this study was to investigate the importance and the effect of shading and non-shading house on physiological changes, body weight (BW), average daily gain (ADG), total antioxidant and thyroid hormones in crossbred calves under hot conditions. Thirty six growing crossbred calves (Friesian x Baladi) aged 8-10 months were divided into two groups (each 18 calves); the first group was maintained in shaded house and the second in house without shade (climatic house). The period of study was 79 days during hot conditions. Performance variables (BW, ADG) were measured and the blood samples were collected to assess some biochemical parameters including antioxidants such as total antioxidant (TA), catalase (CAT), total protein, thyroid hormones (T3, T4) and immunoglobulin factor (IgG). Respiration rates and behaviour parameters (feeding, drinking, standing, lying and agonistic) were also measured during the study. The data indicated that the shaded calves had higher ADG (P<0.05) and final BW than non-shaded ones. Also, a significant improvement in total protein levels and globulins were recorded in shaded house calves as compared to non-shaded ones. The same result was obtained for T3 level whereas non-significant changes were observed for T4 level as well as the level of IgG at different times. The present data indicated that using shaded house will decrease the effect of heat stress on calves which will increase the animal performance through improving BW and ADG as well as some biochemical parameters in addition to T3 hormonal level.

  13. Speciation, behaviour, and fate of mercury under oxy-fuel combustion conditions

    International Nuclear Information System (INIS)

    Córdoba, Patricia; Maroto-Valer, M.; Delgado, Miguel Angel; Diego, Ruth; Font, Oriol; Querol, Xavier

    2016-01-01

    The work presented here reports the first study in which the speciation, behaviour and fate of mercury (Hg) have been evaluated under oxy-fuel combustion at the largest oxy-Pulverised Coal Combustion (oxy-PCC) demonstration plant to date during routine operating conditions and partial exhaust flue gas re-circulation to the boiler. The effect of the CO 2 -rich flue gas re-circulation on Hg has also been evaluated. Results reveal that oxy-PCC operational conditions play a significant role on Hg partitioning and fate because of the continuous CO 2 -rich flue gas re-circulations to the boiler. Mercury escapes from the cyclone in a gaseous form as Hg 2+ (68%) and it is the prevalent form in the CO 2 -rich exhaust flue gas (99%) with lower proportions of Hg 0 (1.3%). The overall retention rate for gaseous Hg is around 12%; Hg 0 is more prone to be retained (95%) while Hg 2+ shows a negative efficiency capture for the whole installation. The negative Hg 2+ capture efficiencies are due to the continuous CO 2 -rich exhaust flue gas recirculation to the boiler with enhanced Hg contents. Calculations revealed that 44 mg of Hg were re-circulated to the boiler as a result of 2183 re-circulations of CO 2 -rich flue gas. Especial attention must be paid to the role of the CO 2 -rich exhaust flue gas re-circulation to the boiler on the Hg enrichment in Fly Ashes (FAs). - Highlights: • The fate of gaseous Hg has been evaluated under oxy-fuel combustion. • The Hg oxidation process is enhanced in CO 2 -rich flue gas recirculation. • Hg 2+ is the prevalent gas species in the CO 2 -rich exhaust flue gas. • Hg 2+ (g) shows a negative efficiency capture for the whole installation. • Especial attention must be paid to the Hg enrichment in Fly Ashes.

  14. Role of soil geochemical and microbiological components on selenium behaviour in oxic and anoxic conditions

    International Nuclear Information System (INIS)

    Darcheville, O.

    2008-09-01

    Selenium (Se) is naturally present in the environment. Se is essential for living organisms at trace concentrations, but it becomes rapidly toxic with their increases. The 79 Se radioactive isotopes of Se, is found in nuclear wastes that may be buried in deep geological formations. In soil, Se exists in many forms and its mobility is affected by the redox potential and microbial activity. Very few studies have focused on Se behaviour at trace concentration. We have tried to distinguish the major abiotic geochemical and microbiological processes involved in the fate of trace selenite (Se(IV)) in a soil. The study was based on batch incubation in oxic or anoxic conditions of slurry suspension artificially contaminated with Se (IV) to 0.4 mg Se.kg -1 dry soil. The incubation involved sterilized and non-sterile soil samples with or without organic amendment to stimulate microbial activities. For each incubation, we followed the distribution of Se between solid, liquid and gaseous phases as well as the geochemical evolution of the solution, the composition of the atmosphere gas bottles and the soil microflora. The results showed that Se was relatively few mobile in the soil studied. Geochemical processes played a major role in controlling the Se mobility. Over time, some abiotic transformations in the solid phase contributed to increase the Se immobilisation. The microbiological processes contributed to this increase in the solid phase. Moreover, in oxic as in anoxic conditions, some microbial processes were responsible, to a lesser extent, for a dispersion of Se in the atmosphere by the production of volatile compounds. (author)

  15. Iodide behaviour in hard clay rocks under controlled physico-chemical conditions at different concentrations

    International Nuclear Information System (INIS)

    Frasca, B.; Savoye, S.; Wittebroodt, C.; Leupin, O.X.; Descostes, M.; Grenut, B.; Meier, P.; Michelot, J.L.

    2010-01-01

    Document available in extended abstract form only. With a half-life of 1.6 10 7 years, its high mobility and its potential to accumulate in the biosphere, iodine-129 is considered, from safety assessment calculations for radioactive waste repositories, to be one of the main radiological dose contributors. Based on the findings of previous studies, iodide, especially at low concentrations, seems to be migrating at a slower rate in clay rock than Cl-36. The cause of this retardation regarding the diffusion of iodide versus chloride is not yet understood but several hypotheses are point towards sorption on natural organic matter (NOM), pyrite or redox reactions. Oxidation of iodide would form IO 3 - which is known to have a higher sorption affinity on several soils and sediment samples than iodide. The present project aims at exploring the effect on the iodide behaviour of two parameters: (i) the initial concentration of iodide and (ii) the amount of NOM contained in the argillite samples. Such an investigation is carried out on Tournemire argillite by means of both batch and through-diffusion experiments. The main challenge is to exclude as much as possible the occurrence of any experimental artefact that could induce iodide uptake (oxygen contamination, dissolution/precipitation of carbonate phases). Regarding redox conditions and rock equilibrium, all the experiments were carried out under physico-chemical conditions as close as possible to those prevailing in field. Using a glove box with an atmosphere of N 2 /CO 2 (respectively 99.6% and 0.4%), we preserved the experiments from oxygen and maintained the calculated in-situ carbonate equilibrium. At first, four through-diffusion experiments with the non-sorbing tracers HTO and Cl-36 were performed to allow the diffusive parameters of each sample to be defined. Afterwards, iodide was injected in the diffusion cells at four different concentrations (10 -6 M to 10 -3 M). Thus, the comparison of the incoming fluxes of

  16. Research activities at JAERI on core material behaviour under severe accident conditions

    International Nuclear Information System (INIS)

    Uetsuka, H.; Katanashi, S.; Ishijima, K.

    1996-01-01

    At the Japan Atomic Energy Research Institute (JAERI), experimental studies on physical phenomena under the condition of a severe accident have been conducted. This paper presents the progress of the experimental studies on fuel and core materials behaviour such as the thermal shock fracture of fuel cladding due to quenching, the chemical interaction of core materials at high temperatures and the examination of TMI-2 debris. The mechanical behaviour of fuel rod with heavily embrittled cladding tube due to the thermal shock during delayed reflooding have been investigated at the Nuclear Safety Research Reactor (NSSR) of JAERI. A test fuel rod was heated in steam atmosphere by both electric and nuclear heating using the NSSR, then the rod was quenched by reflooding at the test section. Melting of core component materials having relatively low melting points and their eutectic reaction with other materials significantly influence on the degradation and melt down of fuel bundles during severe accidents. Therefore basic information on the reaction of core materials is necessary to understand and analyze the progress of core melting and relocation. Chemical interactions have been widely investigated at high temperatures for various binary systems of core component materials including absorber materials such as Zircaloy/Inconel, Zircaloy/stainless steel, Zircaloy/(Ag-In-Cd), stainless steel B 4 C and Zircaloy/B 4 C. It was found that the reaction generally obeyed a parabolic rate law and the reaction rate was determined for each reaction system. Many debris samples obtained from the degraded core of TMI-2 were transported to JAERI for numerous examinations and analyses. The microstructural examination revealed that the most part of debris was ceramic and it was not homogeneous in a microscopic sense. The thermal diffusivity data was also obtained for the temperature range up to about 1800K. The data from the large scale integral experiments were also obtained through the

  17. Long Term Behaviour of 14C and Stability Assessments of Graphite Under Repository Conditions

    International Nuclear Information System (INIS)

    Jones, Abbie N.; McDermott, Lorraine; Worth, Robert; Hagos, Bereket; Black, Greg; Marsden, Barry J

    2016-01-01

    The key objectives of the University of Manchester’s nuclear graphite research within the CRP are to provide analysis on the long term behaviour and stability assessments of irradiated graphite waste. The research will concentrate on isotopic 14 C mobility under repository environments. This also requires an understanding the long-term behaviour of the final waste form under repository conditions. Procedures to evaluate the long term leaching properties of radionuclides from irradiated graphite waste has been developed by combining ANSI 16.1 (USA) and NEN 7345 (Netherlands) standardised diffusion leaching techniques. The ANSI 16.1 standard has been followed to acquire the leachates and to determine the leach rate and diffusion coefficient. The NEN 7345 standard technique has been used to determine the diffusion mechanism of radionuclides. The investigation employs simulated Drigg groundwater as a leachant using semi-dynamic technique for the production of leachate specimens. Analysis of 3 H and 14 C activity release from Magnox graphite was measured using liquid scintillating counting. Preliminary results show that there is an initial high release of activity and decreases when the leaching period increases. This may be due to the depletion of contaminants that were initially bound by the internal pore networks and the free surface. During the leaching test approximately 275.33 ± 18.20 Bq of 3 H and 106.26 ± 7.01 Bq of 14 C was released into the leachant within 91 days. The work reported herein contributed several key findings to the international work on graphite leaching to offer guidance leading toward obtaining leaching data in the future: (a) the effective diffusion coefficient for 14 C from graphite waste has been determined. The diffusion process for 14 C has two stages resulting two different values of diffusion coefficient, i.e., for the fast and slow components; (b) the controlling leaching mechanism for 3 H radionuclide from graphite is shown to be

  18. The active sequence in the acth molecule responsible for inhibition of the extinction of conditioned avoidance behaviour in rats

    NARCIS (Netherlands)

    Greven, H.M.; Wied, D. de

    1967-01-01

    The effect of structural analogues of the N-terminal decapeptide of ACTH on inhibition of extinction of a conditioned avoidance response in rats has been studied. Studies involving the relation between chain length and behavioural activity revealed that the sequence 4–10 is the shortest peptide

  19. Verification of Dinamika-5 code on experimental data of water level behaviour in PGV-440 under dynamic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Beljaev, Y.V.; Zaitsev, S.I.; Tarankov, G.A. [OKB Gidropress (Russian Federation)

    1995-12-31

    Comparison of the results of calculational analysis with experimental data on water level behaviour in horizontal steam generator (PGV-440) under the conditions with cessation of feedwater supply is presented in the report. Calculational analysis is performed using DIMANIKA-5 code, experimental data are obtained at Kola NPP-4. (orig.). 2 refs.

  20. Verification of Dinamika-5 code on experimental data of water level behaviour in PGV-440 under dynamic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Beljaev, Y V; Zaitsev, S I; Tarankov, G A [OKB Gidropress (Russian Federation)

    1996-12-31

    Comparison of the results of calculational analysis with experimental data on water level behaviour in horizontal steam generator (PGV-440) under the conditions with cessation of feedwater supply is presented in the report. Calculational analysis is performed using DIMANIKA-5 code, experimental data are obtained at Kola NPP-4. (orig.). 2 refs.

  1. Behavioural hyperventilation as a novel clinical condition associated with central sleep apnoea: a report of three cases.

    Science.gov (United States)

    Pevernagie, Dirk; Mariman, An; Vandenbussche, Nele; Tobback, Els; Overeem, Sebastiaan; Delesie, Liesbeth; Janssen, Hennie; Vogelaers, Dirk

    2012-12-01

    Central sleep apnoea (CSA) is a disorder characterised by repetitive episodes of decreased ventilation due to complete or partial reduction in the central neural outflow to the respiratory muscles. Hyperventilation plays a prime role in the pathogenesis of CSA. Chronic heart failure and dwelling at high altitude are classical conditions in which CSA is induced by hyperventilation. Hyperventilation syndrome (HVS) is a prevalent behavioural condition in which minute ventilation exceeds metabolic demands, resulting in haemodynamic and chemical changes that produce characteristic dysphoric symptoms. HVS is frequently caused by anxiety disorders and panic attacks. Until now, medical literature has focussed primarily on daytime symptoms of behavioural hyperventilation. It is currently unknown how this condition may affect sleep. Three cases are reported in which behavioural hyperventilation was associated with occurrence of significant central sleep apnoea, which was not present during normal tidal breathing in steady sleep. Therefore, behavioural hyperventilation should be added to the list of known clinical conditions associated with CSA. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Identification of brain nuclei implicated in cocaine-primed reinstatement of conditioned place preference: a behaviour dissociable from sensitization.

    Directory of Open Access Journals (Sweden)

    Robyn Mary Brown

    Full Text Available Relapse prevention represents the primary therapeutic challenge in the treatment of drug addiction. As with humans, drug-seeking behaviour can be precipitated in laboratory animals by exposure to a small dose of the drug (prime. The aim of this study was to identify brain nuclei implicated in the cocaine-primed reinstatement of a conditioned place preference (CPP. Thus, a group of mice were conditioned to cocaine, had this place preference extinguished and were then tested for primed reinstatement of the original place preference. There was no correlation between the extent of drug-seeking upon reinstatement and the extent of behavioural sensitization, the extent of original CPP or the extinction profile of mice, suggesting a dissociation of these components of addictive behaviour with a drug-primed reinstatement. Expression of the protein product of the neuronal activity marker c-fos was assessed in a number of brain regions of mice that exhibited reinstatement (R mice versus those which did not (NR mice. Reinstatement generally conferred greater Fos expression in cortical and limbic structures previously implicated in drug-seeking behaviour, though a number of regions not typically associated with drug-seeking were also activated. In addition, positive correlations were found between neural activation of a number of brain regions and reinstatement behaviour. The most significant result was the activation of the lateral habenula and its positive correlation with reinstatement behaviour. The findings of this study question the relationship between primed reinstatement of a previously extinguished place preference for cocaine and behavioural sensitization. They also implicate activation patterns of discrete brain nuclei as differentiators between reinstating and non-reinstating mice.

  3. Identification of Brain Nuclei Implicated in Cocaine-Primed Reinstatement of Conditioned Place Preference: A Behaviour Dissociable from Sensitization

    Science.gov (United States)

    Brown, Robyn Mary; Short, Jennifer Lynn; Lawrence, Andrew John

    2010-01-01

    Relapse prevention represents the primary therapeutic challenge in the treatment of drug addiction. As with humans, drug-seeking behaviour can be precipitated in laboratory animals by exposure to a small dose of the drug (prime). The aim of this study was to identify brain nuclei implicated in the cocaine-primed reinstatement of a conditioned place preference (CPP). Thus, a group of mice were conditioned to cocaine, had this place preference extinguished and were then tested for primed reinstatement of the original place preference. There was no correlation between the extent of drug-seeking upon reinstatement and the extent of behavioural sensitization, the extent of original CPP or the extinction profile of mice, suggesting a dissociation of these components of addictive behaviour with a drug-primed reinstatement. Expression of the protein product of the neuronal activity marker c-fos was assessed in a number of brain regions of mice that exhibited reinstatement (R mice) versus those which did not (NR mice). Reinstatement generally conferred greater Fos expression in cortical and limbic structures previously implicated in drug-seeking behaviour, though a number of regions not typically associated with drug-seeking were also activated. In addition, positive correlations were found between neural activation of a number of brain regions and reinstatement behaviour. The most significant result was the activation of the lateral habenula and its positive correlation with reinstatement behaviour. The findings of this study question the relationship between primed reinstatement of a previously extinguished place preference for cocaine and behavioural sensitization. They also implicate activation patterns of discrete brain nuclei as differentiators between reinstating and non-reinstating mice. PMID:21209913

  4. TRIBOLOGICAL BEHAVIOURS OF ABS AND PA6 POLYMERMETAL SLIDING COMBINATIONS UNDER DRY FRICTION, WATER ABSORBED AND ELECTROPLATED CONDITIONS

    Directory of Open Access Journals (Sweden)

    MITHUN V. KULKARNI

    2016-01-01

    Full Text Available The friction and wear properties of polyamide 6 (PA6 and poly-Acrylonitrile Butadiene Styrene (ABS sliding against metal under dry sliding, water absorption and electroplated (EP conditions were studied by using a pin-ondisc tribometer. The effect of applied load and sliding speed on the tribological behaviours of the polymer–metal sliding combinations under dry sliding, water absorbed and EP conditions were also investigated. The worn surfaces were examined by using Scanning Electron Microscope (SEM. Experimental results showed that ABS samples under water absorbed conditions showed higher wear loss compared to normal samples and the EP samples had exhibited lower wear loss compared to the water absorbed samples. Similarly EP-PA6 samples exhibited excellent wear resistance when compared with EP-ABS samples. Further, it was observed that the frictional heat produced on account of sliding action had a significant effect on the tribological behaviours of samples under dry sliding and water absorbed conditions.

  5. The behaviour of composites, glass ionomers and compomers in erosive conditions – in vitro study

    Directory of Open Access Journals (Sweden)

    Borş Andreea

    2014-10-01

    Full Text Available Objective: The aim of this in vitro study was to evaluate the influence of erosive conditions on the wear resistance of aesthetic direct restorative materials. Methods: Six dental filling materials were tested: two composites (Filtek Z550 and X-tra fil, two compomers (Dyract Extra and Twinky Star and two glass ionomers (Ketac Molar and Fuji II LC. Twenty disks (10mm×2mm of each material were prepared (n=120 and kept in artificial saliva at 37˚C for 24 hours. Specimens were cycled in acidic soft drink (Coca-Cola 5×/day, for 5’, over 30 days. Initial surface roughness ISR (Ra-μm and final surface roughness FSR were measured using a profilometer. The wear rate was calculated as difference of final minus the initial roughness (ΔSR=FSR-ISR. For statistical analysis t-test and one-way ANOVA test were used by GraphPad Prism version 5.03 statistical software. The level of significance was set at p<0.05. Results: The erosive wear rates (mean±SD, μm after exposure to acidic beverage were: 0.30±0.03 (Ketac Molar, 0.28±0.04 (Fuji II LC, 0.27±0.00 (Filtek Z550, 0.23±0.01 (X-tra fil, 0.20±0.00 (Twinky Star and 0.14±0.01 Dyract Extra, respectively. There were significant differences between the tested materials (p<0.05. Conclusions: Dental filling materials had different behaviour under the same erosive condition, however all investigated aesthetic restorative materials showed surface degradation. These findings suggest that erosive wear resistance of tooth coloured restoratives could influence their longevity in intraoral acidic conditions. Acknowledgements: The study was supported by the Internal Research Grant no. 5/30.01.2013 of the University of Medicine and Pharmacy of Tirgu Mureş.

  6. Hydro-mechanical behaviour of two reference Belgian clay formations under non-isothermal conditions

    International Nuclear Information System (INIS)

    Lima, A.; Romero, E.; Gens, A.; Li, X.L.

    2012-01-01

    Document available in extended abstract form only. Two deep clay formations are being investigated in Belgium in connection with the design of a repository for 'High-Level Radioactive Waste': Boom clay BC at Mol (located between 160 and 270 m depths), considered the reference host formation, and Ypresian clay YC at Kallo (located between 300 and 450 m depths) as an alternative one. A comprehensive experimental programme has been carried out on these materials to explore water permeability at different temperatures and sample orientations, as well as to analyse volume change behaviour on loading/unloading at different temperatures and sample orientations (including pre and post-yield compressibility, yield properties and volume changes on drained thermal loading). Table 1 summarises some properties of BC and YC. Figure 1 presents the pore size distribution PSD curves of both clays obtained by mercury intrusion porosimetry. They display contrasting features (bi-modal pore network in YP with larger dominant pore sizes). Larger water permeability values are expected on YC as indicated in Table 1 and Figure 2, not only as a consequence of its higher void ratio but also due to these double porosity features. Water retention properties, of particular concern on sample retrieval from large depths, are also affected due to desaturation processes that are associated with the double porosity network of YP and its effects on air-entry value (a lower initial suction is measured on YP, despite being retrieved from larger depths). Figure 2 shows vertical and horizontal water permeability results under constant volume conditions and different temperatures. BC and YC display small anisotropy at sample scale - permeability is slightly larger on horizontal direction-. With regard to temperature effects, the figure shows that water permeability dependency on temperature in YC is slightly higher than the water viscosity prediction for both orientations. Instead BC displayed a thermal

  7. Corrosion behaviour of E110- and E635- type zirconium alloys under PWR irradiation simulating conditions

    International Nuclear Information System (INIS)

    Markelov, V.A.; Novikov, V.V.; Kon'kov, V.F.; Tselishchev, A.V.; Dologov, A.B.; Zmitko, M.; Maserik, V.; Kocik, J.

    2008-01-01

    As structural materials for VVER 1000 fuel rod claddings and FA components use is made of zirconium alloys E110 (Zr 1Nb) and E635 (Zr 1.2Sn 1Nb 0.35Fe) that meet the design parameters of operation. Nonetheless, the work is in progress to perfect those alloys to reach higher corrosion and shape change resistance. At VNIINM updated E110M and E635M alloys have been developed on E110 and E635 bases. To assess the corrosion behaviour of the updated alloys in comparison to the base alloys their cladding samples were tested in RVS 3 loop of LWR 15 reactor (NRI, Rez) in PWR water chemistry with coolant surface and volume boiling. The data are presented on the influence effected by in pile irradiation for up to 324 days on oxide coat thickness and microstructure of fuel claddings produced from the four tested alloys. It has been revealed that E110 alloy its updated version E110M and E635M alloy compared to E635 have higher corrosion resistances. The paper discusses th+e results on the in pile corrosion of cladding samples from the alloys under study in comparison to the results acquired for similar samples tested in LWR 15 inactive channel and under autoclave conditions. Using methods of TEM, EDX analyses of extraction replicas dislocation structure and phase composition changes were studied in samples of all four alloy claddings LWR 15 reactor irradiated to the material damage dose of 1.5 dpa. The interrelation is discussed between irradiation effected strengthening and corrosion of fuel claddings made of E110 and E635 type zirconium alloys and the evolution of their structure and phase states

  8. Speciation, behaviour, and fate of mercury under oxy-fuel combustion conditions

    Energy Technology Data Exchange (ETDEWEB)

    Córdoba, Patricia, E-mail: pc247@hw.ac.uk [Centre for Innovation on Carbon Capture and Storage (CICCS), Institute of Mechanical, Process and Energy Engineering (IMPEE), Heriot-Watt University, EH14 4AS (United Kingdom); Maroto-Valer, M. [Centre for Innovation on Carbon Capture and Storage (CICCS), Institute of Mechanical, Process and Energy Engineering (IMPEE), Heriot-Watt University, EH14 4AS (United Kingdom); Delgado, Miguel Angel; Diego, Ruth [Fundacion Ciudad de la Energia (CIUDEN), Avenida Segunda, No 2 (Compostilla), 24004 Ponferrada, León (Spain); Font, Oriol; Querol, Xavier [Institute of Environmental Assessment and Water Research (IDÆA-CSIC), Jordi Girona 18-26, E-08034 Barcelona (Spain)

    2016-02-15

    The work presented here reports the first study in which the speciation, behaviour and fate of mercury (Hg) have been evaluated under oxy-fuel combustion at the largest oxy-Pulverised Coal Combustion (oxy-PCC) demonstration plant to date during routine operating conditions and partial exhaust flue gas re-circulation to the boiler. The effect of the CO{sub 2}-rich flue gas re-circulation on Hg has also been evaluated. Results reveal that oxy-PCC operational conditions play a significant role on Hg partitioning and fate because of the continuous CO{sub 2}-rich flue gas re-circulations to the boiler. Mercury escapes from the cyclone in a gaseous form as Hg{sup 2+} (68%) and it is the prevalent form in the CO{sub 2}-rich exhaust flue gas (99%) with lower proportions of Hg{sup 0} (1.3%). The overall retention rate for gaseous Hg is around 12%; Hg{sup 0} is more prone to be retained (95%) while Hg{sup 2+} shows a negative efficiency capture for the whole installation. The negative Hg{sup 2+} capture efficiencies are due to the continuous CO{sub 2}-rich exhaust flue gas recirculation to the boiler with enhanced Hg contents. Calculations revealed that 44 mg of Hg were re-circulated to the boiler as a result of 2183 re-circulations of CO{sub 2}-rich flue gas. Especial attention must be paid to the role of the CO{sub 2}-rich exhaust flue gas re-circulation to the boiler on the Hg enrichment in Fly Ashes (FAs). - Highlights: • The fate of gaseous Hg has been evaluated under oxy-fuel combustion. • The Hg oxidation process is enhanced in CO{sub 2}-rich flue gas recirculation. • Hg{sup 2+} is the prevalent gas species in the CO{sub 2}-rich exhaust flue gas. • Hg{sup 2+}{sub (g)} shows a negative efficiency capture for the whole installation. • Especial attention must be paid to the Hg enrichment in Fly Ashes.

  9. Fission products and nuclear fuel behaviour under severe accident conditions part 1: Main lessons learnt from the first VERDON test

    Science.gov (United States)

    Pontillon, Y.; Geiger, E.; Le Gall, C.; Bernard, S.; Gallais-During, A.; Malgouyres, P. P.; Hanus, E.; Ducros, G.

    2017-11-01

    This paper describes the first VERDON test performed at the end of September 2011 with special emphasis on the behaviour of fission products (FP) and actinides during the accidental sequence itself. Two other papers discuss in detail the post-test examination results (SEM, EPMA and SIMS) of the VERDON-1 sample. The first VERDON test was devoted to studying UO2 fuel behaviour and fission product releases under reducing conditions at very high temperature (∼2883 K), which was able to confirm the very good performance of the VERDON loop. The fuel sample did not lose its integrity during this test. According to the FP behaviour measured by the online gamma station (fuel sight), the general classification of the FP in relation to their released fraction is very accurate, and the burn-up effect on the release rate is clearly highlighted.

  10. Theoretical and experimental investigations into natural circulation behaviour in a simulated facility of the Indian PHWR under reduced inventory conditions

    International Nuclear Information System (INIS)

    Satish Kumar, N.V.; Nayak, A.K.; Vijayan, P.K.; Pal, A.K.; Saha, D.; Sinha, R.K.

    2004-01-01

    A theoretical and experimental investigation has been carried out to study natural circulation characteristics of an Indian PHWR under reduced inventory conditions. The theoretical model incorporates a quasi-steady state analysis of natural circulation at different system inventories. It predicts the system flow rate under single-phase and two-phase conditions and the inventory at which reflux condensation occurs. The model predictions were compared with test data obtained from FISBE (facility for integral system behaviour experiments), which simulates the thermal hydraulic behaviour of the Indian 220 MWe PHWR. The experimental results were found to be in close agreement with the predictions. It was also found that the natural circulation could be oscillatory under reduced inventory conditions. (orig.)

  11. Comparison of sliding friction and wear behaviour of overhead conveyor steels tested under dry and lubrication conditions

    International Nuclear Information System (INIS)

    Castro-Regal, G.; Fernandez-Vicente, A.; Martinez, M. A.

    2005-01-01

    The sliding friction and wear behaviour of different steel qualities were investigated with and without lubrication conditions. Steel qualities tested are normally used in the overhead conveyor system of many industrial fields, like the automotive sector. Sliding wear tests have been conducted by means of a pin-on-disk machine. A 100Cr6 steel similar to that used within the overhead conveyor trolleys has been employed as a pin. Friction coefficient values obtained under lubrication conditions were three times smaller than those obtained without lubrication. The mechanism that controls wear behaviour under lubrication conditions is an abrasive one and the wear values obtained are almost worthless. On the other hand, mechanism controlling wear during non lubrication tests, was a combination of abrasion and adhesion. (Author) 20 refs

  12. Corrosion fatigue initiation and short crack growth behaviour of austenitic stainless steels under light water reactor conditions

    International Nuclear Information System (INIS)

    Seifert, H.P.; Ritter, S.; Leber, H.J.

    2012-01-01

    Highlights: ► Corrosion fatigue in austenitic stainless steels under light water reactor conditions. ► Identification of major parameters of influence on initiation and short crack growth. ► Critical system conditions for environmental reduction of fatigue initiation life. ► Comparison with the environmental factor (F env ) approach. - Abstract: The corrosion fatigue initiation and short crack growth behaviour of different wrought low-carbon and stabilised austenitic stainless steels was characterised under simulated boiling water reactor and pressurised water reactor primary water conditions by cyclic fatigue tests with sharply notched fracture mechanics specimens. The special emphasis was placed to the behaviour at low corrosion potentials and, in particular, to hydrogen water chemistry conditions. The major parameter effects and critical conjoint threshold conditions, which result in relevant environmental reduction and acceleration of fatigue initiation life and subsequent short crack growth, respectively, are discussed and summarised. The observed corrosion fatigue behaviour is compared with the fatigue evaluation procedures in codes and regulatory guidelines.

  13. Melt-Flow Behaviours of Thermoplastic Materials under Fire Conditions: Recent Experimental Studies and Some Theoretical Approaches

    Directory of Open Access Journals (Sweden)

    Paul Joseph

    2015-12-01

    Full Text Available Polymeric materials often exhibit complex combustion behaviours encompassing several stages and involving solid phase, gas phase and interphase. A wide range of qualitative, semi-quantitative and quantitative testing techniques are currently available, both at the laboratory scale and for commercial purposes, for evaluating the decomposition and combustion behaviours of polymeric materials. They include, but are not limited to, techniques such as: thermo-gravimetric analysis (TGA, oxygen bomb calorimetry, limiting oxygen index measurements (LOI, Underwriters Laboratory 94 (UL-94 tests, cone calorimetry, etc. However, none of the above mentioned techniques are capable of quantitatively deciphering the underpinning physiochemical processes leading to the melt flow behaviour of thermoplastics. Melt-flow of polymeric materials can constitute a serious secondary hazard in fire scenarios, for example, if they are present as component parts of a ceiling in an enclosure. In recent years, more quantitative attempts to measure the mass loss and melt-drip behaviour of some commercially important chain- and step-growth polymers have been accomplished. The present article focuses, primarily, on the experimental and some theoretical aspects of melt-flow behaviours of thermoplastics under heat/fire conditions.

  14. Melt-Flow Behaviours of Thermoplastic Materials under Fire Conditions: Recent Experimental Studies and Some Theoretical Approaches.

    Science.gov (United States)

    Joseph, Paul; Tretsiakova-McNally, Svetlana

    2015-12-15

    Polymeric materials often exhibit complex combustion behaviours encompassing several stages and involving solid phase, gas phase and interphase. A wide range of qualitative, semi-quantitative and quantitative testing techniques are currently available, both at the laboratory scale and for commercial purposes, for evaluating the decomposition and combustion behaviours of polymeric materials. They include, but are not limited to, techniques such as: thermo-gravimetric analysis (TGA), oxygen bomb calorimetry, limiting oxygen index measurements (LOI), Underwriters Laboratory 94 (UL-94) tests, cone calorimetry, etc. However, none of the above mentioned techniques are capable of quantitatively deciphering the underpinning physiochemical processes leading to the melt flow behaviour of thermoplastics. Melt-flow of polymeric materials can constitute a serious secondary hazard in fire scenarios, for example, if they are present as component parts of a ceiling in an enclosure. In recent years, more quantitative attempts to measure the mass loss and melt-drip behaviour of some commercially important chain- and step-growth polymers have been accomplished. The present article focuses, primarily, on the experimental and some theoretical aspects of melt-flow behaviours of thermoplastics under heat/fire conditions.

  15. Enterprising health: creating the conditions for entrepreneurial behaviour as a strategy for effective and sustainable change in health services.

    Science.gov (United States)

    Exton, Rosemary

    2010-01-01

    This paper seeks to investigate conditions under which entrepreneurs emerge as agents of effective and sustainable change in UK National Health Service Trusts. The research synthesises literature on changing regulatory structures ("post-bureaucracy") and entrepreneurial behaviour to understand how individual identity construction is informed both by context and by individual attributes. Thematic analysis of interview data involving managers from 11 NHS Trusts, including detailed analysis of six transcripts, focuses on regulatory processes, the emergence of entrepreneurial behaviour and outcome variations in workplace innovation and improvement. This study identifies co-existing modes of regulation, which interact with individual behaviour, generating strategies differentiated as entrepreneurial or conformist. Four ideal types are identified: organisational entrepreneurship, resisted or dissonant entrepreneurship, conformity, and symbolic entrepreneurship. Analysis reinforces those literature findings, which suggest that the interaction of regulatory structures and the identity work of individuals influence the emergence of entrepreneurial behaviour and the effectiveness of change. The ability to achieve effective and sustainable outcomes varies considerably even between NHS Trusts faced with comparable challenges in implementing nationally prescribed targets. This variance is explained in terms of the organisation's ability to generate the structures, processes, individual competence and motivation which enable employees at all levels to act entrepreneurially with the ability and legitimacy to achieve strategic goals by working creatively in the spaces between formal organisational structures. The study identifies specific conditions, which stimulate the emergence of entrepreneurs as agents of effective and sustainable change in the NHS, identifying factors that policymakers should consider when implementing change.

  16. Use of natural and archaeological analogs to validate long - term behaviour of HLW glass in geological disposal conditions

    International Nuclear Information System (INIS)

    Gin, S.; Verney-Carron, A.; Libourel, G.

    2008-01-01

    Some old basaltic and Roman glasses have been studied in order to validate the predictive models developed for assessing the long-term behaviour of nuclear glass in geological repository conditions. Leaching behaviour of basaltic glass altered in both laboratory and natural environment conditions allows to validate the key mechanisms that control glass dissolution kinetics and the order of magnitude of glass packages lifetime In a stable clayey formation (French reference concept for a geological disposal of high level waste). The study of Roman glass blocks (with the same geometry as nuclear glass package) altered during 1800 years in a marine environment gives new insight on the basic mechanisms involved in confined media (fractures and small cracks). Results show the importance of the coupling between transport of reactive species and chemical reactions. This study, still in progress, would allow to validate the modelling of such a complex system. (author)

  17. Review of the expected behaviour of alpha titanium alloys under Yucca Mountain conditions

    International Nuclear Information System (INIS)

    Shoesmith, D.W.

    2000-03-01

    The use of titanium alloys in two different waste package designs has been reviewed under the, conditions anticipated in the Yucca Mountain nuclear waste repository. In the first design. they are considered as one of three barrier materials incorporated into the waste package design and potentially in galvanic contact with the other two waste package materials, 316L stainless steel and Alloy-22. In the second design the Ti alloy is considered as a drip shield placed over, and not in contact with, a dual wall waste package fabricated from the other two materials. The possible failure processes, crevice corrosion, pitting and hydrogen-induced cracking (HIC) have been reviewed for the candidate titanium alloys (Ti-12, Ti-16 and Ti-7). Both pitting and crevice corrosion are very remote possibilities under these conditions. For Ti-12, a limited amount of crevice corrosion is possible but repassivation will occur before substantial damage is sustained. When Ti is considered as part of the triple wall waste package, hydrogen absorption leading to HIC, within an acidified but passive crevice, is the most likely failure mechanism. When the Ti alloy is utilized in the form of a drip shield then hydrogen absorption under potentially alkaline conditions is the major fear. Both Ti-12 and Ti-16 have been shown capable of tolerating substantial amounts of hydrogen (∼400 μ g·g -1 for Ti-12, and > 1000 μg.g -1 for Ti-16) before any effect on the materials fracture toughness is observed. The rate of absorption to a hydrogen content which exceeds these values will be the key feature determining if, or when, the material becomes susceptible to cracking. Once this condition is achieved, whether or not failure occurs will depend on the strength and location of stresses within the structure. For Ti to absorb hydrogen it is inevitably necessary to subject the material to cathodic polarization, either by coupling to a more active material or by the application of galvanic protection

  18. Review of the expected behaviour of alpha titanium alloys under Yucca Mountain conditions

    Energy Technology Data Exchange (ETDEWEB)

    Shoesmith, D.W

    2000-03-01

    The use of titanium alloys in two different waste package designs has been reviewed under the, conditions anticipated in the Yucca Mountain nuclear waste repository. In the first design. they are considered as one of three barrier materials incorporated into the waste package design and potentially in galvanic contact with the other two waste package materials, 316L stainless steel and Alloy-22. In the second design the Ti alloy is considered as a drip shield placed over, and not in contact with, a dual wall waste package fabricated from the other two materials. The possible failure processes, crevice corrosion, pitting and hydrogen-induced cracking (HIC) have been reviewed for the candidate titanium alloys (Ti-12, Ti-16 and Ti-7). Both pitting and crevice corrosion are very remote possibilities under these conditions. For Ti-12, a limited amount of crevice corrosion is possible but repassivation will occur before substantial damage is sustained. When Ti is considered as part of the triple wall waste package, hydrogen absorption leading to HIC, within an acidified but passive crevice, is the most likely failure mechanism. When the Ti alloy is utilized in the form of a drip shield then hydrogen absorption under potentially alkaline conditions is the major fear. Both Ti-12 and Ti-16 have been shown capable of tolerating substantial amounts of hydrogen ({approx}400 {mu} g{center_dot}g{sup -1} for Ti-12, and > 1000 {mu}g.g{sup -1} for Ti-16) before any effect on the materials fracture toughness is observed. The rate of absorption to a hydrogen content which exceeds these values will be the key feature determining if, or when, the material becomes susceptible to cracking. Once this condition is achieved, whether or not failure occurs will depend on the strength and location of stresses within the structure. For Ti to absorb hydrogen it is inevitably necessary to subject the material to cathodic polarization, either by coupling to a more active material or by the

  19. Phase Behaviour of Methane Hydrate Under Conditions Relevant to Titan's Interior

    Science.gov (United States)

    Sclater, G.; Fortes, A. D.; Crawford, I. A.

    2018-06-01

    The high-pressure behaviour Clathrate hydrates, thought to be abundant in the outer solar system, underpins planetary modelling efforts of the interior of Titan, where clathrates are hypothesised to be the source of the dense N2, CH4 atmosphere.

  20. Monosodium glutamate-associated alterations in open field, anxiety-related and conditioned place preference behaviours in mice.

    Science.gov (United States)

    Onaolapo, Olakunle James; Aremu, Olaleye Samuel; Onaolapo, Adejoke Yetunde

    2017-07-01

    The present study investigated changes in behaviour associated with oral monosodium glutamate (a flavouring agent), using the open field, elevated plus maze and conditioned place preference (CPP) paradigms, respectively. Mice were assigned to two groups for CPP [monosodium glutamate (MSG)-naïve (n = 40) and MSG-pretreated (n = 40)] and two groups for open field (OF) and elevated plus maze (EPM) tests [n = 40 each], respectively. Animals in respective groups were then divided into four subgroups (n = 10) (vehicle or MSG (80, 160 and 320 mg/kg)). MSG-naïve mice were observed in the CPP box in three phases (pre-conditioning, conditioning and post-conditioning). Mice were conditioned to MSG or an equivalent volume of saline. The MSG pretreatment group received vehicle or respective doses of MSG daily for 21 days, prior to conditioning. Mice in the OF or EPM groups received vehicle or doses of MSG (orally) for 21 days, at 10 ml/kg. Open field or EPM behaviours were assessed on days 1 and 21. At the end of the experiments, mice in the OF groups were sacrificed and brain homogenates used to assay glutamate and glutamine. Results showed that administration of MSG was associated with a decrease in rearing, dose-related mixed horizontal locomotor, grooming and anxiety-related response and an increase in brain glutamate/glutamine levels. Following exposure to the CPP paradigm, MSG-naïve and MSG-pretreated mice both showed 'drug-paired' chamber preference. The study concluded that MSG (at the administered doses) was associated with changes in open field activities, anxiety-related behaviours and brain glutamate/glutamine levels; its ingestion also probably leads to a stimulation of the brain reward system.

  1. Behavioural, neurochemical and neuroendocrine effects of the endogenous β-carboline harmane in fear-conditioned rats.

    Science.gov (United States)

    Smith, Karen L; Ford, Gemma K; Jessop, David S; Finn, David P

    2013-02-01

    The putative endogenous imidazoline binding site ligand harmane enhances neuronal activation in response to psychological stress and alters behaviour in animal models of anxiety and antidepressant efficacy. However, the neurobiological mechanisms underlying harmane's psychotropic effects are poorly understood. We investigated the effects of intraperitoneal injection of harmane (2.5 and 10 mg/kg) on fear-conditioned behaviour, hypothalamo-pituitary-adrenal axis activity, and monoaminergic activity within specific fear-associated areas of the rat brain. Harmane had no significant effect on the duration of contextually induced freezing or 22 kHz ultrasonic vocalisations and did not alter the contextually induced suppression of motor activity, including rearing. Harmane reduced the duration of rearing and tended to increase freezing in non-fear-conditioned controls, suggesting potential sedative effects. Harmane increased plasma ACTH and corticosterone concentrations, and serotonin (in hypothalamus, amygdaloid cortex, prefrontal cortex and hippocampus) and noradrenaline (prefrontal cortex) content, irrespective of fear-conditioning. Furthermore, harmane reduced dopamine and serotonin turnover in the PFC and hypothalamus, and serotonin turnover in the amygdaloid cortex in both fear-conditioned and non-fear-conditioned rats. In contrast, harmane increased dopamine and noradrenaline content and reduced dopamine turnover in the amygdala of fear-conditioned rats only, suggesting differential effects on catecholaminergic transmission in the presence and absence of fear. The precise mechanism(s) mediating these effects of harmane remain to be determined but may involve its inhibitory action on monoamine oxidases. These findings support a role for harmane as a neuromodulator, altering behaviour, brain neurochemistry and neuroendocrine function.

  2. Thermal and hydraulic behaviour of CANDU cores under severe accident conditions - final report

    International Nuclear Information System (INIS)

    Rogers, J.T.

    1984-06-01

    This volume of appendices presents listings and sample runs of the computer codes used in the study of the thermalhydraulic behaviour of CANDU reactor cores during severe loss of coolant accidents. The codes, written in standard FORTRAN, are MODBOIL, to calculate moderator temperatures, pressures and water levels; DEBRIS, to calculate the transient temperature distribution in the debris of calandria and pressure tubes and fuel pellets; MOLTENPOOL, to calculate the temperature history in a pool of molten debris; CONFILM, to calculate the behaviour of a condensing film of vaporized core debris on the calandria wall, and BLDG, to calculate the pressurization of the containment during the expulsion of moderator through pressure relief ducts. In addition there are discussions of the average condensation heat transfer coefficient for vaporized core material on the calandria wall, and of vapor explosions

  3. PHEBUS program: first results on PWR fuel behaviour in LOCA conditions

    International Nuclear Information System (INIS)

    Del Negro, R.; Reocreux, M.; Pelce, J.; Legrand, B.; Berna, P.

    1982-09-01

    In the first PHEBUS test with pressurized rods some rods burst and clad temperature reached 1100 0 C in the 25 rods bundle. There is now a lot of valuable experimental results and their analysis is in progress. The phase II on fuel behaviour in case of a large LOCA will start at the beginning of 83. The onset of the SFD program is foreseen to take place on the first months of 85

  4. Behaviour of fibre reinforced polymer confined reinforced concrete columns under fire condition

    Science.gov (United States)

    Chowdhury, Ershad Ullah

    In recent years, fibre reinforced polymer (FRP) materials have demonstrated enormous potential as materials for repairing and retrofitting concrete bridges that have deteriorated from factors such as electro-chemical corrosion and increased load requirements. However, concerns associated with fire remain an obstacle to applications of FRP materials in buildings and parking garages due to FRP's sensitivity to high temperatures as compared with other structural materials and to limited knowledge on their thermal and mechanical behaviour in fire. This thesis presents results from an ongoing study on the fire performance of FRP materials, fire insulation materials and systems, and FRP wrapped reinforced concrete columns. The overall goal of the study is to understand the fire behaviour of FRP materials and FRP strengthened concrete columns and ultimately, provide rational fire safety design recommendations and guidelines for FRP strengthened concrete columns. A combined experimental and numerical investigation was conducted to achieve the goals of this research study. The experimental work consisted of both small-scale FRP material testing at elevated temperatures and full-scale fire tests on FRP strengthened columns. A numerical model was developed to simulate the behaviour of unwrapped reinforced concrete and FRP strengthened reinforced concrete square or rectangular columns in fire. After validating the numerical model against test data available in literature, it was determined that the numerical model can be used to analyze the behaviour of concrete axial compressive members in fire. Results from this study also demonstrated that although FRP materials experience considerable loss of their mechanical and bond properties at temperatures somewhat below the glass transition temperature of the resin matrix, externally-bonded FRP can be used in strengthening concrete structural members in buildings, if appropriate supplemental fire protection system is provided over

  5. Simulation of the behaviour of nuclear fuel under high burnup conditions

    International Nuclear Information System (INIS)

    Soba, Alejandro; Lemes, Martin; González, Martin Emilio; Denis, Alicia; Romero, Luis

    2014-01-01

    Highlights: • Increasing the time of nuclear fuel into reactor generates high burnup structure. • We analyze model to simulate high burnup scenarios for UO 2 nuclear fuel. • We include these models in the DIONISIO 2.0 code. • Tests of our models are in very good agreement with experimental data. • We extend the range of predictability of our code up to 60 MWd/KgU average. - Abstract: In this paper we summarize all the models included in the latest version of the DIONISIO code related to the high burnup scenario. Due to the extension of nuclear fuels permanence under irradiation, physical and chemical modifications are developed in the fuel material, especially in the external corona of the pellet. The codes devoted to simulation of the rod behaviour under irradiation need to introduce modifications and new models in order to describe those phenomena and be capable to predict the behaviour in all the range of a general pressurized water reactor. A complex group of subroutines has been included in the code in order to predict the radial distribution of power density, burnup, concentration of diverse nuclides and porosity within the pellet. The behaviour of gadolinium as burnable poison also is modelled into the code. The results of some of the simulations performed with DIONISIO are presented to show the good agreement with the data selected for the FUMEX I/II/III exercises, compiled in the NEA data bank

  6. Acute alcohol impairs conditioning of a behavioural reward-seeking response and inhibitory control processes--implications for addictive disorders.

    Science.gov (United States)

    Loeber, Sabine; Duka, Theodora

    2009-12-01

    To investigate whether acute alcohol would affect performance of a conditioned behavioural response to obtain a reward outcome and impair performance in a task measuring inhibitory control to provide new knowledge of how the acute effects of alcohol might contribute to the transition from alcohol use to dependence. A randomized controlled between-subjects design was employed. The laboratory of experimental psychology at the University of Sussex. Thirty-two light to moderate social drinkers recruited from the undergraduate and postgraduate population. After the administration of alcohol (0.8 g/kg) or placebo participants underwent an instrumental reward-seeking procedure, with abstract stimuli serving as S+ (always predicting a win of 10 pence) and S- (always predicting a loss of 10 pence). In addition, a Stop Signal task was administered before and after the administration of alcohol. Participants of the alcohol group performed the behavioural response to obtain the reward outcome more often than placebo subjects in trials associated with loss of money. This finding was observed, although alcohol was not affecting explicit knowledge of stimulus-response outcome contingencies and acquisition of conditioned attentional and emotional responses. In addition, alcohol increased Stop Signal reaction time indicating disinhibiting effects of alcohol, and this was associated positively with response probability to the S-. These results demonstrate that alcohol is affecting inhibitory control of behavioural responses to external signals even when associated with punishment, contributing in this way to the transition from alcohol use to dependence.

  7. Crack growth behaviour of low-alloy steels for pressure boundary components under transient light water reactor operating conditions - CASTOC, Part I: BWR/NWC conditions

    International Nuclear Information System (INIS)

    Ritter, S.; Seifert, H.P.; Devrient, B.; Roth, A.; Ehrnsten, U.; Ernestova, M.; Zamboch, M.; Foehl, J.; Weissenberg, T.; Gomez-Briceno, D.; Lapena, J.

    2004-01-01

    One of the ageing phenomena of pressure boundary components of light water reactors (LWR) is environmentally-assisted cracking (EAC). The project CASTOC (5. Framework Programme of the EU) was launched September 2000 with six European partners and terminated August 2003. It was focused in particular on the EAC behaviour of low-alloy steels (LAS) and to some extent to weld metal, heat affected zone and the influence of an austenitic cladding. The main objective was directed to the clarification of EAC crack growth behaviour/mechanism of LAS in high-temperature water under steady-state power operation (constant load) and transient operating conditions (e.g., start-up/shut-down, transients in water chemistry and load). Autoclave tests were performed with Western and Russian type reactor pressure vessel steels under simulated boiling water reactor (BWR)/normal water chemistry (NWC) and pressurised water reactor (VVER) conditions. The investigations were performed with fracture mechanics specimens of different sizes and geometries. The applied loading comprised cyclic loads, static loads and load spectra where the static load was periodically interrupted by partial unloading. With regard to water chemistry, the oxygen content (VVER) and impurities of sulphate and chlorides (BWR) were varied beyond allowable limits for continuous operation. The current paper summarises the most important crack growth results obtained under simulated BWR/NWC conditions. The results are discussed in the context of the current crack growth rate curves in the corresponding nuclear codes. (authors)

  8. Crack growth behaviour of low-alloy steels for pressure boundary components under transient light water reactor operating conditions - CASTOC, Part I: BWR/NWC conditions

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, S.; Seifert, H.P. [Paul Scherrer Institute, PSI, Villigen (Switzerland); Devrient, B.; Roth, A. [Framatome ANP GmbH, Erlangen (Germany); Ehrnsten, U. [VTT Industrial Systems, Espoo (Finland); Ernestova, M.; Zamboch, M. [Nuclear Research Institute, NRI, Rez (Czech Republic); Foehl, J.; Weissenberg, T. [Staatliche Materialpruefungsanstalt, MPA, Stuttgart (Germany); Gomez-Briceno, D.; Lapena, J. [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas, CIEMAT, Madrid (Spain)

    2004-07-01

    One of the ageing phenomena of pressure boundary components of light water reactors (LWR) is environmentally-assisted cracking (EAC). The project CASTOC (5. Framework Programme of the EU) was launched September 2000 with six European partners and terminated August 2003. It was focused in particular on the EAC behaviour of low-alloy steels (LAS) and to some extent to weld metal, heat affected zone and the influence of an austenitic cladding. The main objective was directed to the clarification of EAC crack growth behaviour/mechanism of LAS in high-temperature water under steady-state power operation (constant load) and transient operating conditions (e.g., start-up/shut-down, transients in water chemistry and load). Autoclave tests were performed with Western and Russian type reactor pressure vessel steels under simulated boiling water reactor (BWR)/normal water chemistry (NWC) and pressurised water reactor (VVER) conditions. The investigations were performed with fracture mechanics specimens of different sizes and geometries. The applied loading comprised cyclic loads, static loads and load spectra where the static load was periodically interrupted by partial unloading. With regard to water chemistry, the oxygen content (VVER) and impurities of sulphate and chlorides (BWR) were varied beyond allowable limits for continuous operation. The current paper summarises the most important crack growth results obtained under simulated BWR/NWC conditions. The results are discussed in the context of the current crack growth rate curves in the corresponding nuclear codes. (authors)

  9. Analytical study of flow instability behaviour in a boiling two-phase natural circulation loop under low quality conditions

    International Nuclear Information System (INIS)

    Nayak, A.K.; Kumar, N.; Vijayan, P.K.; Saha, D.; Sinha, R.K.

    2002-01-01

    Analytical investigations have been carried out to study the flow instability behaviour in a boiling two-phase natural circulation loop under low quality conditions. For this purpose, the computer code TINFLO-S has been developed. The code solves the conservation equations of mass, momentum and energy and equation of state for homogeneous equilibrium twophase flow using linear analytical technique. The results of the code have been validated with the experimental data of the loop for both the steady state and stability. The study reveals that the stability behaviour of low quality flow oscillations is different from that of the high quality flow oscillations. The instability reduces with increase in power and throttling at the inlet of the heater. The instability first increases and then reduces with increase in pressure at any subcooling. The effects of diameter of riser pipe, heater and the height of the riser on this instability are also investigated. (orig.) [de

  10. Behavioural changes in response to sound exposure and no spatial avoidance of noisy conditions in captive zebrafish

    Directory of Open Access Journals (Sweden)

    Yik Yaw (Errol eNeo

    2015-02-01

    Full Text Available Auditory sensitivity in fish serves various important functions, but also makes fish susceptible to noise pollution. Human-generated sounds may affect behavioural patterns of fish, both in natural conditions and in captivity. Fish are often kept for consumption in aquaculture, on display in zoos and hobby aquaria, and for medical sciences in research facilities, but little is known about the impact of ambient sounds in fish tanks. In this study, we conducted two indoor exposure experiments with zebrafish (Danio rerio. The first experiment demonstrated that exposure to moderate sound levels (112 dB re 1 μPa can affect the swimming behaviour of fish by changing group cohesion, swimming speed and swimming height. Effects were brief for both continuous and intermittent noise treatments. In the second experiment, fish could influence exposure to higher sound levels by swimming freely between an artificially noisy fish tank (120-140 dB re 1 μPa and another with ambient noise levels (89 dB re 1 μPa. Despite initial startle responses, and a brief period in which many individuals in the noisy tank dived down to the bottom, there was no spatial avoidance or noise-dependent tank preference at all. The frequent exchange rate of about 60 fish passages per hour between tanks was not affected by continuous or intermittent exposures. In conclusion, small groups of captive zebrafish were able to detect sounds already at relatively low sound levels and adjust their behaviour to it. Relatively high sound levels were at least at the on-set disturbing, but did not lead to spatial avoidance. Further research is needed to show whether zebrafish are not able to avoid noisy areas or just not bothered. Quantitatively, these data are not directly applicable to other fish species or other fish tanks, but they do indicate that sound exposure may affect fish behaviour in any captive condition.

  11. Statistical and time domain signal analysis of the thermal behaviour of wind turbine drive train components under dynamic operation conditions

    International Nuclear Information System (INIS)

    Nienhaus, K; Baltes, R; Bernet, C; Hilbert, M

    2012-01-01

    Gearboxes and generators are fundamental components of all electrical machines and the backbone of all electricity generation. Since the wind energy represents one of the key energy sources of the future, the number of wind turbines installed worldwide is rapidly increasing. Unlike in the past wind turbines are more often positioned in arctic as well as in desert like regions, and thereby exposed to harsh environmental conditions. Especially the temperature in those regions is a key factor that defines the design and choice of components and materials of the drive train. To optimize the design and health monitoring under varying temperatures it is important to understand the thermal behaviour dependent on environmental and machine parameters. This paper investigates the behaviour of the stator temperature of the double fed induction generator of a wind turbine. Therefore, different scenarios such as start of the turbine after a long period of no load, stop of the turbine after a long period of full load and others are isolated and analysed. For each scenario the dependences of the temperature on multiple wind turbine parameters such as power, speed and torque are studied. With the help of the regression analysis for multiple variables, it is pointed out which parameters have high impact on the thermal behaviour. Furthermore, an analysis was done to study the dependences in the time domain. The research conducted is based on 10 months of data of a 2 MW wind turbine using an adapted data acquisition system for high sampled data. The results appear promising, and lead to a better understanding of the thermal behaviour of a wind turbine drive train. Furthermore, the results represent the base of future research of drive trains under harsh environmental conditions, and it can be used to improve the fault diagnosis and design of electrical machines.

  12. An initial study of the behaviour under repository conditions of inactive components of nuclear wastes

    International Nuclear Information System (INIS)

    Biddle, P.; Rees, J.H.

    1988-02-01

    This review extends the appreciation of repository behaviour to include the inactive components of wastes and their degradation products. These materials include a wide range of metals and organics, sludges and decommissioning wastes. The effect of degradation products on the solubility of long-lived radionuclides and any active daughters and their sorption on surfaces of the repository are assessed. Research requirements are identified that may help to improve significantly the assessment of the effects of inactive materials. Data required to improve the quality of inventory data on nuclear wastes are listed. (author)

  13. Sex differences in the behavioural and hypothalamic-pituitary-adrenal response to contextual fear conditioning in rats.

    Science.gov (United States)

    Daviu, Núria; Andero, Raül; Armario, Antonio; Nadal, Roser

    2014-11-01

    In recent years, special attention is being paid to sex differences in susceptibility to disease. In this regard, there is evidence that male rats present higher levels of both cued and contextual fear conditioning than females. However, little is known about the concomitant hypothalamic-pituitary-adrenal (HPA) axis response to those situations which are critical in emotional memories. Here, we studied the behavioural and HPA responses of male and female Wistar rats to context fear conditioning using electric footshock as the aversive stimulus. Fear-conditioned rats showed a much greater ACTH and corticosterone response than those merely exposed to the fear conditioning chamber without receiving shocks. Moreover, males presented higher levels of freezing whereas HPA axis response was greater in females. Accordingly, during the fear extinction tests, female rats consistently showed less freezing and higher extinction rate, but greater HPA activation than males. Exposure to an open-field resulted in lower activity/exploration in fear-conditioned males, but not in females, suggesting greater conditioned cognitive generalization in males than females. It can be concluded that important sex differences in fear conditioning are observed in both freezing and HPA activation, but the two sets of variables are affected in the opposite direction: enhanced behavioural impact in males, but enhanced HPA responsiveness in females. Thus, the role of sex differences on fear-related stimuli may depend on the variables chosen to evaluate it, the greater responsiveness of the HPA axis in females perhaps being an important factor to be further explored. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Crack Growth Behaviour of P92 Steel Under Creep-fatigue Interaction Conditions

    Directory of Open Access Journals (Sweden)

    JING Hong-yang

    2017-05-01

    Full Text Available Creep-fatigue interaction tests of P92 steel at 630℃ under stress-controlled were carried out, and the crack propagation behaviour of P92 steel was studied. The fracture mechanism of crack growth under creep-fatigue interaction and the transition points in a-N curves were analyzed based on the fracture morphology. The results show that the fracture of P92 steel under creep-fatigue interaction is creep ductile fracture and the (Ctavg parameter is employed to demonstrate the crack growth behaviour; in addition, the fracture morphology shows that the crack growth for P92 steel under creep-fatigue interaction is mainly caused by the nucleation and growth of the creep voids and micro-cracks. Furthermore, the transition point of a-lg(Ni/Nf curve corresponds to the turning point of initial crack growth changed into steady crack growth while the transition point of (da/dN-N curve exhibits the turning point of steady creep crack growth changed into the accelerated crack growth.

  15. Geomechanical behaviour of boom clay under ambient and elevated temperature conditions

    International Nuclear Information System (INIS)

    Neerdael, B.; Beaufays, R.; Buyens, M.; Bruyn, D. de; Voet, M.

    1992-01-01

    This research is focused upon in-situ investigations related to the (thermo-) mechanical behaviour of clay. Three main items are covered in this research area: Stress measurements around the underground research facility for radioactive waste disposal using hydraulical stress monitoring stations; detection of micro-fractures in the clay host, mainly using geophysical seismic techniques; long term mechanical behaviour of clay (this last item, studied by ANDRA at Mol, is not described in this paper). The stress monitoring stations appear to be more reliable in getting relative pressure variations with time rather than absolute values of stress, even after studying and improving the characteristics of the surrounding grout. The seismic techniques used to appear to be sensitive and accurate enough for detecting induced fracturation in the clay host, even for the low temperature. This is also in agreement with bench-scale experiments on clay samples intended to quantify the influence of both temperature and consolidation on the velocity. 10 refs., 80 figs., 3 tabs

  16. Tailored reflectors for illumination.

    Science.gov (United States)

    Jenkins, D; Winston, R

    1996-04-01

    We report on tailored reflector design methods that allow the placement of general illumination patterns onto a target plane. The use of a new integral design method based on the edge-ray principle of nonimaging optics gives much more compact reflector shapes by eliminating the need for a gap between the source and the reflector profile. In addition, the reflectivity of the reflector is incorporated as a design parameter. We show the performance of design for constant irradiance on a distant plane, and we show how a leading-edge-ray method may be used to achieve general illumination patterns on nearby targets.

  17. Decision Making under Risk Condition in Patients with Parkinson’s Disease: A Behavioural and fMRI Study

    Directory of Open Access Journals (Sweden)

    Kirsten Labudda

    2010-01-01

    Full Text Available We aimed to study whether previously described impairment in decision making under risky conditions in patients with Parkinson's disease (PD is affected by deficits in using information about potential incentives or by processing feedback (in terms of fictitious gains and losses following each decision. Additionally, we studied whether the neural correlates of using explicit information in decision making under risk differ between PD patients and healthy subjects. We investigated ten cognitively intact PD patients and twelve healthy subjects with the Game of Dice Task (GDT to assess risky decision making, and with an fMRI paradigm to analyse the neural correlates of information integration in the deliberative decision phase. Behaviourally, PD patients showed selective impairment in the GDT but not on the fMRI task that did not include a feedback component. Healthy subjects exhibited lateral prefrontal, anterior cingulate and parietal activations when integrating decision-relevant information. Despite similar behavioural patterns on the fMRI task, patients exhibited reduced parietal activation. Behavioural results suggest that PD patients’ deficits in risky decision making are dominated by impaired feedback utilization not compensable by intact cognitive functions. Our fMRI results suggest similarities but also differences in neural correlates when using explicit information for the decision process, potentially indicating different strategy application even if the interfering feedback component is excluded.

  18. Systematic investigation of the impact of operation conditions on the degradation behaviour of perovskite solar cells

    Science.gov (United States)

    Domanski, Konrad; Alharbi, Essa A.; Hagfeldt, Anders; Grätzel, Michael; Tress, Wolfgang

    2018-01-01

    Perovskite solar cells have achieved power-conversion efficiency values approaching those of established photovoltaic technologies, making the reliable assessment of their operational stability the next essential step towards commercialization. Although studies increasingly often involve a form of stability characterization, they are conducted in non-standardized ways, which yields data that are effectively incomparable. Furthermore, stability assessment of a novel material system with its own peculiarities might require an adjustment of common standards. Here, we investigate the effects of different environmental factors and electrical load on the ageing behaviour of perovskite solar cells. On this basis, we comment on our perceived relevance of the different ways these are currently aged. We also demonstrate how the results of the experiments can be distorted and how to avoid the common pitfalls. We hope this work will initiate discussion on how to age perovskite solar cells and facilitate the development of consensus stability measurement protocols.

  19. Fuel pin behaviour under conditions of control rod withdrawal accident in CABRI-2 experiments

    International Nuclear Information System (INIS)

    Papin, Joelle; Lemoine, Francette; Sato, Ikken; Struwe, Dankward; Pfrang, Werner

    1994-01-01

    Simulation of the control rod withdrawal accident has been performed in the international CABRI-2 experimental programme. The tests realized with industrial pins led to clarification of the influence of the pellet design and have shown the important role of fission products on the solid fuel swelling which promotes early pin failure with solid fuel pellet. With annular pellet design, large fuel swelling combined to low smear density leads to degradation of fuel thermal conductivity and thus reduces power to melt. However, the high margin to deterministic failure is confirmed with hollow pellets. Improvements of the modelling were necessary to describe such behaviours in computer codes as SAS-4A, PAPAS-2S and PHYSURAC. (author)

  20. Recent results from CEC cost sharing research programme on LWR fuel behaviour under accident conditions

    International Nuclear Information System (INIS)

    Fairbairn, S.A.

    1983-01-01

    The present structure and intentions of the CEC sponsored cost sharing programme for LWR safety research are outlined. Detailed results are reported for two projects from this programme. The first project concerns experimental data on the thermohydraulic effects of flow diversion around ballooned fuel rods. Data are presented on single and two phase heat transfer in an electrically heated rod bundle. Detailed photographic data on droplet behaviour are also given. The second project is an investigation of the effects of zircaloy oxidation on rewetting during reflood. It is shown that as oxide thickness increases from 1μm to 76μm that rewet rates can increase by up to 40%. A systematic effect of oxidation on rewet temperatures is also noted. (author)

  1. Conditions associated with REM sleep behaviour disorder: Description of a hospital series.

    Science.gov (United States)

    Abenza Abildúa, M J; Miralles Martinez, A; Arpa Gutiérrez, F J; Lores Gutiérrez, V; Algarra Lucas, C; Jimeno Montero, C; Sánchez García, B; Mata Álvarez-Santullano, M; Borrue Fernández, C; Cordero Martín, G; Gutiérrez Cueto, G; Torrecillas Narváez, M D; Thuissard Vasallo, I; Gómez Aceña, A

    2017-02-16

    REM sleep behaviour disorder (RBD) is characterised by violent behaviours (screaming, kicking, vivid dreams) during REM sleep. It has a prevalence of 1% to 2% of the general population and is especially frequent in men and the population older than 60. In the last decade, RBD has been suggested to be a prodrome of neurodegenerative disease. We analysed associated neurological diseases and responses to drug treatment in 33 patients with RBD treated in the multidisciplinary sleep disorders unit at Hospital Infanta Sofía. We conducted an observational descriptive retrospective analysis of patients diagnosed with RBD and treated in our multidisciplinary sleep disorders unit between October 2012 and December 2015. We recorded age, sex, associated diseases, and treatments administered to these patients. A total of 365 patients were attended at our unit, including 33 with RBD: 13 women (40%) and 20 men (60%). Mean age was 62.72 years. An associated disorder was identified in 48%, with the most common being mild cognitive impairment (69%). The percentage of patients with RBD and an associated disorder among patients older than 60 was 68%. Eighty-two percent of the patients required treatment. The most commonly used drug was clonazepam (76%), followed by melatonin (9%), gabapentin (6%), and trazodone (3%). In our series, 48% of the patients had an associated disorder. The likelihood of detecting an associated disorder increases with patients' age. The vast majority of patients required drug treatment due to symptom severity; the most frequently administered drug was clonazepam (76%). Copyright © 2017 The Author(s). Publicado por Elsevier España, S.L.U. All rights reserved.

  2. Working conditions, job dissatisfaction and smoking behaviours among French clerks and manual workers.

    Science.gov (United States)

    Peretti-Watel, Patrick; Constance, Jean; Seror, Valérie; Beck, François

    2009-03-01

    To study the relationships between working conditions, job dissatisfaction and smoking behaviors among clerks and manual workers. We used data from the French Health Barometer, a cross-sectional telephone survey conducted among a national random sample (N = 4825). Regarding working conditions, the questionnaire dealt with reported job satisfaction, psychological demands and mental workload, physical demands, latitude decision and work schedule. Manual workers and clerks who reported strong dissatisfaction toward unhealthy working conditions also reported more frequently current smoking, tobacco dependence, potential alcohol dependence and perceived stress. After adjusting for socio-demographic confounders, perceived working conditions and job dissatisfaction remained correlated with smoking and tobacco dependence. Poor working conditions may heavily contribute to health inequalities, as they are likely to fuel both stress and unhealthy behaviors, which combine to increase morbidity and mortality.

  3. Personally tailored activities for improving psychosocial outcomes for people with dementia in long-term care.

    Science.gov (United States)

    Möhler, Ralph; Renom, Anna; Renom, Helena; Meyer, Gabriele

    2018-02-13

    People with dementia who are being cared for in long-term care settings are often not engaged in meaningful activities. Offering them activities which are tailored to their individual interests and preferences might improve their quality of life and reduce challenging behaviour. ∙ To assess the effects of personally tailored activities on psychosocial outcomes for people with dementia living in long-term care facilities.∙ To describe the components of the interventions.∙ To describe conditions which enhance the effectiveness of personally tailored activities in this setting. We searched ALOIS, the Cochrane Dementia and Cognitive Improvement Group's Specialized Register, on 16 June 2017 using the terms: personally tailored OR individualized OR individualised OR individual OR person-centred OR meaningful OR personhood OR involvement OR engagement OR engaging OR identity. We also performed additional searches in MEDLINE (Ovid SP), Embase (Ovid SP), PsycINFO (Ovid SP), CINAHL (EBSCOhost), Web of Science (ISI Web of Science), ClinicalTrials.gov, and the World Health Organization (WHO) ICTRP, to ensure that the search for the review was as up to date and as comprehensive as possible. We included randomised controlled trials and controlled clinical trials offering personally tailored activities. All interventions included an assessment of the participants' present or past preferences for, or interests in, particular activities as a basis for an individual activity plan. Control groups received either usual care or an active control intervention. Two authors independently checked the articles for inclusion, extracted data and assessed the methodological quality of included studies. For all studies, we assessed the risk of selection bias, performance bias, attrition bias and detection bias. In case of missing information, we contacted the study authors. We included eight studies with 957 participants. The mean age of participants in the studies ranged from 78 to 88

  4. Feeding behaviour and growth of the Peruvian scallop (Argopecten purpuratus) under daily cyclic hypoxia conditions

    Science.gov (United States)

    Aguirre-Velarde, Arturo; Jean, Fred; Thouzeau, Gérard; Flye-Sainte-Marie, Jonathan

    2018-01-01

    As a secondary consequence of the high productivity of the upwelling system, organisms inhabiting Peruvian coastal bays are frequently exposed to hypoxic conditions. The aim of the present paper was to investigate the effects of daily-cyclic-severe hypoxia on energetics of a species presenting little escape ability when facing hypoxia. For this purpose, juvenile Peruvian scallops (Argopecten purpuratus) were exposed to four experimental conditions: fed and starved, combined or not to nightly severe hypoxia (5% oxygen saturation) for ≈ 12 h over a 21-day experiment. In both fed conditions, clearance rate was measured by the mean of an open-flow system. Our results indicate that the Peruvian scallop is able to maintain an active filtration even at low oxygen saturation, at least during expositions up to 12 h. During the first phase of exposure to hypoxia, clearance rate decreased abruptly when oxygen saturation dropped below 10%, but rapidly recovered to values close to those found under normoxia. As a consequence of this ability to feed during hypoxia, no difference in soft tissue dry weight (digestive gland not included) was observed at the end of the experimental period between oxic conditions among fed scallops. However, shell growth was negatively affected by hypoxic condition. Starved individuals exhibited similar weight loss between hypoxic and normoxic conditions indicating no or little effect of oxic condition on maintenance costs. Considering the observed responses for feeding, growth and maintenance, we can hypothesize that this species presents metabolic/bioenergetic efficient adaptations to deal with hypoxic conditions that are recurrent in Peruvian coastal bays. We hypothesize that the small observed effects might be modelled in the context of the Dynamic Energy Budget theory as a restriction of reserve mobilization under hypoxic conditions.

  5. Investigation into the behaviour of bentonite in contact with magnetite and iron under the conditions of a final repository

    International Nuclear Information System (INIS)

    Mueller-Vonmoos, M.; Kahr, G.; Bucher, F.; Madsen, F.; Mayor, P.A.

    1991-05-01

    This report presents the results of investigations into how magnetite and iron affect the swelling behaviour of the Na-bentonite MX-80 and the Ca-bentonite Montigel. The experiments were conducted under conditions similar to those expected in a repository and covered cation exchange capacity, exchangeable cations and the swelling behaviour of the Na-bentonite MX-80 and the Ca-bentonite Montigel. Waste disposal is assumed to occur at a temperature of 80 o C under an anoxic atmosphere. In addition to this, the behaviour of trivalent iron in the interlayer space of montmorillonite was investigated. The investigations confirmed that contact between iron and bentonite under such conditions leads mainly to formation of magnetite and hydrogen. Montmorillonite does not take up iron by cation-exchange, either on contact with magnetite or with iron itself. The trivalent iron is unstable in the interlayer space of the montmorillonite and is exchanged mainly for aluminium; no change in the interlayer charge can be determined in such a case. It is therefore to be assumed that the aluminium is taken up from the edges of the clay particles into the interlayer space, but that no chlorite formation can be observed during this process. At 80 o C and 150 o C, the swelling pressures of the highly compacted bentonite-iron samples, related to the dry density of the bentonites, corresponded more or less to the swelling pressures of the untreated bentonites. The swelling pressure of the Fe(III)-bentonites was around 50% higher. It is assumed that this is mainly due to the high hydration energy of the iron and aluminium ions. 6 figs., 6 tabs., 13 refs

  6. SSYST, a code-system for analysing transient LWR fuel rod behaviour under off-normal conditions

    International Nuclear Information System (INIS)

    Borgwaldt, H.; Gulden, W.

    1983-01-01

    SSYST is a code-system for analysing transient fuel rod behaviour under off-normal conditions, developed conjointly by the Institut fuer Kernenergetik und Energiesysteme (IKE), Stuttgart, and Kernforschungszentrum Karlsruhe (KfK) under contract of Projek Nukleare Sicherheit (PNS) at KfK. The main differences between SSYST and similar codes are (1) an open-ended modular code organisation, and (2) a preference for simple models, wherever possible. While the first feature makes SSYST a very flexible tool, easily adapted to changing requirements, the second feature leads to short execution times. The analysis of transient rod behaviour under LOCA boundary conditions takes 2 min cpu-time (IBM-3033), so that extensive parametric studies become possible. This paper gives an outline of the overall code organisation and a general overview of the physical models implemented. Besides explaining the routine application of SSYST in the analysis of loss-of-coolant accidents, examples are given of special applications which have led to a satisfactory understanding of the decisive influence of deviations from rotational symmetry on the fuel rod perimeter. (author)

  7. Farm to abattoir conditions, animal factors and their subsequent effects on cattle behavioural responses and beef quality — A review

    Directory of Open Access Journals (Sweden)

    Yonela Zifikile Njisane

    2017-06-01

    Full Text Available The current review seeks to highlight the concerns that have been raised on pre-slaughter stress, contributing factors and its consequent effects on cattle behavioural responses and the quality of beef; inter-linking the activities involved from birth to slaughter. Such information is crucial in light of the consumer concerns on overall animal welfare, quality of meat and food security. Slaughter animals are exposed to different conditions during production and transportation to abattoirs on a daily basis. However; the majority of studies that have been done previously singled out different environments in the meat production chain, while conclusions have been made that the welfare of slaughter animals and the quality of meat harvested from them is dependent on the whole chain. Behaviour is a critical component used to evaluate the animals’ wellbeing and it has been reported to have an effect on product quality. Apart from the influence of on-farm, transportation and abattoir conditions, the genetic background of the animal also affects how it perceives and responds to certain encounters. Stress activates the animals’ hypothalamic-pituitary-adrenal activity, triggering release of various stress hormones such as catecholamines and cortisol, thus glycogen depletion prior slaughter, elevated ultimate pH and poor muscle-meat conversion. Pre-slaughter stress sometimes results to cattle attaining bruises, resulting to the affected parts of the carcass being trimmed and condemned for human consumption, downgrading of the carcass and thus profit losses.

  8. SSYST: A code-system for analyzing transient LWR fuel rod behaviour under off-normal conditions

    International Nuclear Information System (INIS)

    Borgwaldt, H.; Gulden, W.

    1983-01-01

    SSYST is a code-system for analyzing transient fuel rod behaviour under off-normal conditions, developed conjointly by the Institut fur Kernenergetik und Energiesysteme (IKE), Stuttgart, and Kernforschungszentrum Karlsruhe (KfK) under contract of Projekt Nukleare Sicherheit (PNS) at KfK. The main differences between SSYST and similar codes are an open-ended modular code organization, and a preference for simple models, wherever possible. While the first feature makes SSYST a very flexible tool, easily adapted to changing requirements, the second feature leads to short execution times. The analysis of transient rod behaviour under LOCA boundary conditions takes 2 min cpu-time (IBM-3033), so that extensive parametric studies become possible. This paper gives an outline of the overall code organisation and a general overview of the physical models implemented. Besides explaining the routine application of SSYST in the analysis of loss-of-coolant accidents, examples are given of special applications which have led to a satisfactory understanding of the decisive influence of deviations from rotational symmetry on the fuel rod perimeter

  9. The effects of intrinsic noise on the behaviour of bistable cell regulatory systems under quasi-steady state conditions.

    Science.gov (United States)

    de la Cruz, Roberto; Guerrero, Pilar; Spill, Fabian; Alarcón, Tomás

    2015-08-21

    We analyse the effect of intrinsic fluctuations on the properties of bistable stochastic systems with time scale separation operating under quasi-steady state conditions. We first formulate a stochastic generalisation of the quasi-steady state approximation based on the semi-classical approximation of the partial differential equation for the generating function associated with the chemical master equation. Such approximation proceeds by optimising an action functional whose associated set of Euler-Lagrange (Hamilton) equations provides the most likely fluctuation path. We show that, under appropriate conditions granting time scale separation, the Hamiltonian can be re-scaled so that the set of Hamilton equations splits up into slow and fast variables, whereby the quasi-steady state approximation can be applied. We analyse two particular examples of systems whose mean-field limit has been shown to exhibit bi-stability: an enzyme-catalysed system of two mutually inhibitory proteins and a gene regulatory circuit with self-activation. Our theory establishes that the number of molecules of the conserved species is order parameters whose variation regulates bistable behaviour in the associated systems beyond the predictions of the mean-field theory. This prediction is fully confirmed by direct numerical simulations using the stochastic simulation algorithm. This result allows us to propose strategies whereby, by varying the number of molecules of the three conserved chemical species, cell properties associated to bistable behaviour (phenotype, cell-cycle status, etc.) can be controlled.

  10. Interaction of genotype and environment: Effect of strain and housing condition on cognitive behaviour in rodent models of schizophrenia

    Directory of Open Access Journals (Sweden)

    Karly M. Turner

    2013-07-01

    Full Text Available Schizophrenia is associated with many genetic and environmental risk factors and there is growing evidence that the interactions between genetic and environmental ‘hits’ are critical for disease onset. Animal models of schizophrenia have traditionally used specific strain and housing conditions to test potential risk factors. As the field moves towards testing gene (G x environment (E interactions the impact of these choices should be considered. Given the surge of research focused on cognitive deficits, we have examined studies of cognition in rodents from the perspective of GxE interactions, in which strain or housing manipulations have been varied. Behaviour is clearly altered by these factors, yet few animal models of schizophrenia have investigated cognitive deficits using different strain and housing conditions. It is important to recognise the large variation in behaviour observed when using different strain and housing combinations because GxE interactions may mask or exacerbate cognitive outcomes. Further consideration will improve our understanding of GxE interactions and the underlying neurobiology of cognitive impairments in neuropsychiatric disorders.

  11. Music regulators in two string quartet ensembles: a comparison of communicative behaviours between low- and high-stress performance conditions

    Directory of Open Access Journals (Sweden)

    Michele Biasutti

    2016-08-01

    Full Text Available In ensemble performances, group members use particular bodily behaviours as a sort of language to supplement the lack of verbal communication. This research study focuses on music regulators, which are defined as signs to other group members for coordinating performance. The following two music regulators are considered: body gestures for articulating attacks (a set of movements externally directed that are used to signal entrances in performance and eye contacts. These regulators are recurring observable behaviors that play an important role in nonverbal communication among ensemble members. To understand how these regulators are used by chamber musicians, video recordings of members of two string quartet ensemble performances (Quartet Ensemble A performing Bartók and Quartet Ensemble B performing Haydn were analysed under two conditions: a low stress performance (LSP, undertaken in a rehearsal setting, and a high stress performance (HSP during a live concert. The results provide evidence for more emphasis in gestures for articulating attacks (i.e. the perceived strength of a performed attack-type body gestures during HSP than LSP. . Conversely, no significant differences were found for the frequency of eye contact between HSP and LSP. Moreover, there was variability in eye contacts during HSP and LSP, showing that these behaviours are less standardised and may change according to idiosyncratic performing conditions. Educational implications are discussed for improving interpersonal communication skills during ensemble performance.

  12. The effects of intrinsic noise on the behaviour of bistable cell regulatory systems under quasi-steady state conditions

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Roberto; Alarcón, Tomás de la [Centre de Recerca Matemàtica. Edifici C, Campus de Bellaterra, 08193 Bellaterra (Barcelona) (Spain); Departament de Matemàtiques, Universitat Autònoma de Barcelona, 08193 Bellaterra (Barcelona) (Spain); Guerrero, Pilar [Department of Mathematics, University College London, Gower Street, London WC1E 6BT (United Kingdom); Spill, Fabian [Department of Biomedical Engineering, Boston University, 44 Cummington Street, Boston, Massachusetts 02215 (United States); Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States)

    2015-08-21

    We analyse the effect of intrinsic fluctuations on the properties of bistable stochastic systems with time scale separation operating under quasi-steady state conditions. We first formulate a stochastic generalisation of the quasi-steady state approximation based on the semi-classical approximation of the partial differential equation for the generating function associated with the chemical master equation. Such approximation proceeds by optimising an action functional whose associated set of Euler-Lagrange (Hamilton) equations provides the most likely fluctuation path. We show that, under appropriate conditions granting time scale separation, the Hamiltonian can be re-scaled so that the set of Hamilton equations splits up into slow and fast variables, whereby the quasi-steady state approximation can be applied. We analyse two particular examples of systems whose mean-field limit has been shown to exhibit bi-stability: an enzyme-catalysed system of two mutually inhibitory proteins and a gene regulatory circuit with self-activation. Our theory establishes that the number of molecules of the conserved species is order parameters whose variation regulates bistable behaviour in the associated systems beyond the predictions of the mean-field theory. This prediction is fully confirmed by direct numerical simulations using the stochastic simulation algorithm. This result allows us to propose strategies whereby, by varying the number of molecules of the three conserved chemical species, cell properties associated to bistable behaviour (phenotype, cell-cycle status, etc.) can be controlled.

  13. Predicting User Acceptance and Continuance Behaviour Towards Location-based Services: The Moderating Effect of Facilitating Conditions on Behavioural Intention and Actual Use

    Directory of Open Access Journals (Sweden)

    Mohamamd Alamgir Hossain

    2017-06-01

    Full Text Available The purpose of this study is to establish and examine the significance of a consumer acceptance and continuance model for location-based services (LBSs through the integration of perceived entertainment gratification (PEG and perceived application quality (PAQ with the technology acceptance model (TAM. By arguing that behavioural intention (BI does not automatically lead to actual use (AU, we investigated the moderating effect of facilitating conditions (FC on the relationship between BI and AU. A quantitative study was conducted in Australia and Bangladesh; data were obtained from multiple sources by systematic sampling of the distribution of questionnaires. For data analysis we applied the partial least square (PLS method. The results indicate that, in both Australia and Bangladesh, perceived usefulness (PU, PEG and PAQ have significant influence on user attitude (UA, which has a subsequent effect on BI. Interestingly, perceived ease of use (PEoU does not have a direct effect on UA but indirectly influences it through PU—confirming the mediating effect of PU. Further, FC has a moderating effect between BI and AU. The implications of these findings and directions for future research directions are also discussed.

  14. Repeated elicitation of the acoustic startle reflex leads to sensitisation in subsequent avoidance behaviour and induces fear conditioning

    Directory of Open Access Journals (Sweden)

    Janik Vincent M

    2011-04-01

    Full Text Available Abstract Background Autonomous reflexes enable animals to respond quickly to potential threats, prevent injury and mediate fight or flight responses. Intense acoustic stimuli with sudden onsets elicit a startle reflex while stimuli of similar intensity but with longer rise times only cause a cardiac defence response. In laboratory settings, habituation appears to affect all of these reflexes so that the response amplitude generally decreases with repeated exposure to the stimulus. The startle reflex has become a model system for the study of the neural basis of simple learning processes and emotional processing and is often used as a diagnostic tool in medical applications. However, previous studies did not allow animals to avoid the stimulus and the evolutionary function and long-term behavioural consequences of repeated startling remain speculative. In this study we investigate the follow-up behaviour associated with the startle reflex in wild-captured animals using an experimental setup that allows individuals to exhibit avoidance behaviour. Results We present evidence that repeated elicitation of the acoustic startle reflex leads to rapid and pronounced sensitisation of sustained spatial avoidance behaviour in grey seals (Halichoerus grypus. Animals developed rapid flight responses, left the exposure pool and showed clear signs of fear conditioning. Once sensitised, seals even avoided a known food source that was close to the sound source. In contrast, animals exposed to non-startling (long rise time stimuli of the same maximum sound pressure habituated and flight responses waned or were absent from the beginning. The startle threshold of grey seals expressed in units of sensation levels was comparable to thresholds reported for other mammals (93 dB. Conclusions Our results demonstrate that the acoustic startle reflex plays a crucial role in mediating flight responses and strongly influences the motivational state of an animal beyond a short

  15. Tribological and mechanical behaviours of rattan-fibre-reinforced friction materials under dry sliding conditions

    Science.gov (United States)

    Ma, Yunhai; Wu, Siyang; Tong, Jin; Zhao, Xiaolou; Zhuang, Jian; Liu, Yucheng; Qi, Hongyan

    2018-03-01

    This work was mainly aimed to study the physical, mechanical and tribological behaviours of the friction materials reinforced by different contents of rattan fibre. These friction materials were fabricated by a compression moulder and tested using a constant speed tester at different friction temperatures. It was found that the friction coefficients of the friction materials added with rattan fibre were relatively stable and no obvious fade was observed in comparison with specimen F-0 (containing 0 wt.% rattan fibres). The fade ratio of specimen F-5 (containing 5 wt.% rattan fibres) was 10.3% and its recovery ratio was 92.4%, indicating the excellent performances of fade resistance and recovery. And the specimen F-5 exhibited the lowest wear rate (0.541 × 10‑7 cm3(N · m)‑1 at 350 °C) among all tested specimens. The worn surface morphologies of the friction materials showed that the appropriate addition of rattan fibres effectively reduced abrasive wear and adhesion wear. The specimen F-5 had a smooth worn surface (Sa = 1.885 μm) with the superior fibre-matrix interfacial adhesion and a lot of secondary contact plateaus, which indicated the highest wear resistance property. The rattan-fibre-reinforced friction materials could be widely applied to automotive friction brake field according to their economic, environmental and social benefits.

  16. Modelling of WWER-440 fuel rod behaviour under operational conditions with the PIN-micro code

    Energy Technology Data Exchange (ETDEWEB)

    Stefanova, S; Vitkova, M; Simeonova, V; Passage, G; Manolova, M [Institute for Nuclear Research and Nuclear Energy, Sofia (Bulgaria); Haralampieva, Z [National Electric Company Ltd., Kozloduy (Bulgaria); Scheglov, A; Proselkov, V [Institute of Nuclear Reactors, RSC Kurchatov Inst., Moscow (Russian Federation)

    1997-08-01

    The report summarizes the first practical experience obtained by fuel rod performance modelling at the Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences. The results of application of the PIN-micro code and the code modification PINB1 for thermomechanical analysis of WWER-440 fuel assemblies (FAs) are presented. The aim of this analysis is to study the fuel rod behaviour of the operating WWER reactors. The performance of two FAs with maximal linear power and varying geometrical and technological parameters is analyzed. On the basis of recent publications on WWER fuel performance modelling at extended burnup, a modified PINB1 version of the standard PIN-micro code is shortly described and applied for the selected FAs. Comparison of the calculated results is performed. The PINB1 version predicts higher fuel temperatures and more adequate FGR rate, accounting for the extended burnup. The results presented in this paper prove the existence of sufficient safety margins, for the fuel performance limiting parameters during the whole considered period of core operation. (author). 8 refs, 16 figs, 1 tab.

  17. Modelling of WWER-440 fuel rod behaviour under operational conditions with the PIN-micro code

    International Nuclear Information System (INIS)

    Stefanova, S.; Vitkova, M.; Simeonova, V.; Passage, G.; Manolova, M.; Haralampieva, Z.; Scheglov, A.; Proselkov, V.

    1997-01-01

    The report summarizes the first practical experience obtained by fuel rod performance modelling at the Institute for Nuclear Research and Nuclear Energy, Bulgarian Academy of Sciences. The results of application of the PIN-micro code and the code modification PINB1 for thermomechanical analysis of WWER-440 fuel assemblies (FAs) are presented. The aim of this analysis is to study the fuel rod behaviour of the operating WWER reactors. The performance of two FAs with maximal linear power and varying geometrical and technological parameters is analyzed. On the basis of recent publications on WWER fuel performance modelling at extended burnup, a modified PINB1 version of the standard PIN-micro code is shortly described and applied for the selected FAs. Comparison of the calculated results is performed. The PINB1 version predicts higher fuel temperatures and more adequate FGR rate, accounting for the extended burnup. The results presented in this paper prove the existence of sufficient safety margins, for the fuel performance limiting parameters during the whole considered period of core operation. (author). 8 refs, 16 figs, 1 tab

  18. Tailored Random Graph Ensembles

    International Nuclear Information System (INIS)

    Roberts, E S; Annibale, A; Coolen, A C C

    2013-01-01

    Tailored graph ensembles are a developing bridge between biological networks and statistical mechanics. The aim is to use this concept to generate a suite of rigorous tools that can be used to quantify and compare the topology of cellular signalling networks, such as protein-protein interaction networks and gene regulation networks. We calculate exact and explicit formulae for the leading orders in the system size of the Shannon entropies of random graph ensembles constrained with degree distribution and degree-degree correlation. We also construct an ergodic detailed balance Markov chain with non-trivial acceptance probabilities which converges to a strictly uniform measure and is based on edge swaps that conserve all degrees. The acceptance probabilities can be generalized to define Markov chains that target any alternative desired measure on the space of directed or undirected graphs, in order to generate graphs with more sophisticated topological features.

  19. Iodine behaviour under LWR accident conditions: Lessons learnt from analyses of the first two Phebus FP tests

    International Nuclear Information System (INIS)

    Girault, N.; Dickinson, S.; Funke, F.; Auvinen, A.; Herranz, L.; Krausmann, E.

    2006-01-01

    The International Phebus Fission Product programme, initiated in 1988 and performed by the French 'Institut de Radioprotection et de Surete Nucleaire' (IRSN), investigates through a series of in-pile integral experiments, key phenomena involved in light water reactor (LWR) severe accidents. The tests cover fuel rod degradation and the behaviour of fission products released via the primary coolant circuit into the containment building. The results of the first two tests, called FPT0 and Ftp, carried out under low pressure, in a steam rich atmosphere and using fresh fuel for Ftp and fuel burned in a reactor at 23 GWdt -1 for Ftp, were immensely challenging, especially with regard to the iodine radiochemistry. Some of the most important observed phenomena with regard to the chemistry of iodine were indeed neither predicted nor pre-calculated, which clearly shows the interest and the need for carrying out integral experiments to study the complex phenomena governing fission product behaviour in a PWR in accident conditions. The three most unexpected results in the iodine behaviour related to early detection during fuel degradation of a weak but significant fraction of volatile iodine in the containment, the key role played by silver rapidly binding iodine to form insoluble AgI in the containment sump and the importance of painted surfaces in the containment atmosphere for the formation of a large quantity of volatile organic iodides. To support the Phebus test interpretation small-scale analytical experiments and computer code analyses were carried out. The former, helping towards a better understanding of overall iodine behaviour, were used to develop or improve models while the latter mainly aimed at identifying relevant key phenomena and at modelling weaknesses. Specific efforts were devoted to exploring the potential origins of the early-detected volatile iodine in the containment building. If a clear explanation has not yet been found, the non-equilibrium chemical

  20. Grain boundary sweeping and dissolution effects on fission product behaviour under severe fuel damage accident conditions

    International Nuclear Information System (INIS)

    Rest, J.

    1986-01-01

    The theoretical FASTGRASS-VFP model has been used in the interpretation of fission gas, iodine, tellurium, and cesium release from severe-fuel-damage (SFD) tests performed in the PBF reactor in Idaho. A theory of grain boundary sweeping of gas bubbles, gas bubble behavior during fuel liquefaction (destruction of grain boundaries due to formation of a U-rich melt phase), and during U-Zr eutectic melting has been included within the FASTGRASS-VFP formalism. The grain-boundary-sweeping theory considers the interaction between the moving grain boundary and two distinct size classes of bubbles, those on grain faces and on grain edges. The theory of the effects of fuel liquefaction and U-Zr eutectic melting on fission product behaviour considers the migration and coalescence of fission gas bubbles in either molten uranium, or a Zircaloy-Uranium eutectic melt. Results of the analyses demonstrate that intragranular fission product behavior during the tests can be interpreted in terms of a grain-growth/grain-boundary-sweeping mechanism that enhances the flow of fission products from within the grains to the grain boundaries. Whereas fuel liquefaction leads to an enhanced release of fission products in trace-irradiated fuel, the occurrence of fuel liquefaction in normally-irradiated fuel can degrade fission product release. This phenomenon is due in part to reduced gas-bubble mobilities in a viscous medium as compared to vapor transport, and in part to a degradation of grain growth rates and the subsequent decrease in grain-boundary sweeping of intragranular fission products into the liquified lamina. The analysis shows that total UO 2 dissolution due to eutectic melting leads to increased release for both trace-irradiated and normally-irradiated fuel. The FASTGRASS-VFP predictions, measured release rates from the above tests, and previously published release rates are compared and differences between fission product behavior in trace-irradiated and in normally

  1. Stainless steel corrosion in conditions simulating WWER-1000 primary coolant. Corrosion behaviour in mixed core

    International Nuclear Information System (INIS)

    Krasnorutskij, V.S.; Petel'guzov, I.A.; Gritsina, V.M.; Zuek, V.A.; Tret'yakov, M.V.; Rud', R.A.; Svichkar', N.V.; Slabospitskaya, E.A.; Ishchenko, N.I.

    2011-01-01

    Research into corrosion kinetics of austenitic stainless steels (06Cr18Ni10Ti, 08Cr18Ni10Ti, 12Cr18Ni10Ti) in medium which corresponds to composition and parameters of WWER-1000 primary coolant with different pH values in autoclave out-pile conditions during 14000 hours is given. Surface of oxide films on stainless steels is investigated. Visual inspection of Westinghouse and TVEL fuel was carried out after 4 cycles in WWER-1000 primary water chemistry conditions at South Ukraine NPP. Westinghouse and TVEL fuel cladding materials possess high corrosion resistance. Blushing of weldments was observed. No visual corrosion defects or deposits were observed on fuel rods.

  2. Microbial ecology of Rum Jungle, III. Leaching behaviour of sulphidic waste material under controlled conditions

    International Nuclear Information System (INIS)

    Babij, T.; Goodman, A.; Khalid, A.M.; Ralph, B.J.

    1981-12-01

    The discharge, into river systems, of acid and heavy metals generated by leaching of sulphidic waste materials at the abandoned opencut uranium mine at Rum Jungle, Northern Territory, is causing continuing pollution of the surrounding environment. The maximum effects of acid and microorganisms on samples from the overburden dump material, under defined and controlled environmental conditions, were assessed using reactor systems. These samples came from the overburden dump resulting from the mining of White's orebody. Similarly, the stability of tailings material under conditions of flooding and increasing acidity was determined. At ph 2.5, metals in White's dump material were solubilised by acid attack only, whereas at pH 3.5, bacterial activity (principally that of Thiobacillus ferrooxidans) generated acidity and contributed significantly to metal release. Under microaerophilic conditions Thiobacillus ferrooxidans continued to effect metal release from the ore, but did not produce further acidity. If White's overburden is returned to the acidic, flooded opencuts, complete solubilisation of the material will occur. The exclusion of oxygen from the dump will not necessarily stop bacterially catalysed leaching processes. Under highly aerated and agitated flooded conditions the tailings material was not active, except for copper release of about 2 g kg -1 ore at pH 4.0. The only deleterious element released by increasing acidity was copper, which was 100 per cent solubilised at pH 2.5. Uranium was always lss than 3 μg kg -1 ore, and lead was detected only at pH 2.5. Indigenous leaching bacteria did not develop

  3. A stable enol from a 6-substituted benzanthrone and its unexpected behaviour under acidic conditions

    Directory of Open Access Journals (Sweden)

    Marc Debeaux

    2009-06-01

    Full Text Available Treatment of benzanthrone (1 with biphenyl-2-yl lithium leads to the surprisingly stable enol 4, which is converted by dehydrogenation into the benzanthrone derivative 7. Under acidic conditions 4 isomerises to the spiro compound 11 and the bicyclo[4.3.1]decane derivative 12. Furthermore, the formation of 7 and the hydrogenated compound 13 is observed. A mechanism for the formation of the reaction products is proposed and supported by DFT calculations.

  4. Boundary conditions for the solar burst phenomenons stablished from the statistical behaviour in the hard X-ray range

    International Nuclear Information System (INIS)

    Correia, E.

    1983-01-01

    A review on the statistical studies of solar burst parameters at X-rays and microwaves, as well as an analysis of the limits caused by instrumental sensitivity and their effect on the form of the distributions and on the establishment of boundary conditions for solar flare phenomena are presented. A study on the statistical behaviour of events observed with high sensitivity at hard X-rays with the HXRBS experiment (SMM) was performed. Maxima have been formed in the parameters distribution, which may be related to intrinsic characteristics of the source-regions. This result seems to confirm searly studies which indicated the influence of the sensitivity limits. Assuming the maxima of the distributions as real, it was possible to establish boundary conditions for the mechanisms of primary energy release. The principal condition establishes that solar bursts can be interpreted as a superposition of primary explosions. The statistical analysis permitted the estimate of a value for the amount of energy in a primary explosion, making use of adjustments of Poisson functions. The value found is consistent with values derived directly from ultra-fast time structures observed in bursts. Assuming an empirical pulse shape for the primary burst and the superposition condition, simulations of bursts have been successfully obtained. (Author) [pt

  5. Electrochemical behaviour of stainless steel under radiation and exposed to representative chemistry in pressurised water reactor conditions

    International Nuclear Information System (INIS)

    Wang, Mi

    2013-01-01

    The dissertation focuses on the behaviour of stainless steel under irradiation and exposed to primary PWR conditions. The electrochemical potential of austenitic 316L stainless steel and the environmental parameters (hydrogen pressure, temperature, etc.,) have been measured continuously at high temperature (HT) and high pressure (HP) under irradiation, using a unique experimental HTHP working cell. Two sources of irradiation, proton and electron beams, have been employed in the study. A high similarity of electrochemical behaviour under both types of irradiations has been observed: (i) an oxidative potential response under irradiation (few tens of milli-volts); (ii) an increase in the hydrogen pressure reduces the oxidative potential response; (iii) a synergetic effect of thermal ageing and fluence leading to a decrease of the oxidative response under irradiation. The observations of the oxide film showed that without irradiation, metallic nickel in the inner and outer oxide films has been observed under a high hydrogen pressure. Under irradiation, um scale cavities (pits) have been observed in the strongly electron irradiated oxide film formed on 316L stainless steel. These defects are induced by the effect of irradiation of the passive film and water radiolysis. It is also shown that water radiolysis influences the PWR water chemistry by making it become a stronger oxidant at the oxide/solution interface. As a result, the release of metallic cations is increased and a-Fe 2 O 3 hematite has been observed on the irradiated outer oxide film where cavities were formed. (author) [fr

  6. Modelling Spent Fuel and HLW Behaviour in Repository Conditions. A review of the state of the art

    International Nuclear Information System (INIS)

    Martinez-Esparza, A.; Esteban, J. A.; Quinones, J.; Pablo, J. de; Casas, I.; Gimenez, J.; Clarens, F.; Rovira, M.; Merino, J.; Cera, E.; Bruno, J.; Ripoll, S.

    2002-01-01

    The SFS (Spent Fuel Stability) project that is being carried out as part of the European Union's 5th Framework Programme has a dual objective, technical and sociologic. The technical objectives consists of developing a model of the behaviour of irradiated fuel and of the radionuclides contained therein, under the conditions of a deep geological disposal facility, incorporating the experimental part of this and previous. European projects. The sociological objectives is to develop a common scientific and technical opinion throughout the European Union, for consensus to be reached regarding the evolution of a deep geological disposal facility for high level wastes. With a view to achieving this dual objective, and as a project activity, a Seminar was organised in Avila in June 2002 (the presentations made of this Seminar will be the subject of another publication), the aim being to establish the bases for a new spent fuel behaviour model with and ample experimental basis and the consensus of the European countries participating in the project (France, Switzerland, Germany, Sweden, Belgium and Spain. (Author)

  7. Behaviour of gas conditions during vacuum arc discharges used for deposition of thin films

    International Nuclear Information System (INIS)

    Strzyzewski, J.; Langner, J.; Sadowski, M.; Witkowski, J.; Mirowski, R.; Catani, L.; Cianchi, A.; Russo, R.; Tazzari, S.

    2005-01-01

    The vacuum arc, which is one of the oldest techniques used for the deposition of thin films, is now widely used for the Plasma Immersion Ion Implantation and Deposition (PIII and D) in laboratory and industry. Despite of high progress in this field observed during last three decades, involving e.g. magnetic filters for the elimination of micro-droplets, some problems have not been resolved so far. The paper concerns an important problem which is connected with the inclusion of some impurities in the deposited metal film. It was found that appearance of contaminants in the film is induced mainly by water vapour remnants inside the vacuum chamber. The high adsorption of such contaminants by the deposited thin films is observed particularly in so-called getter materials, as niobium and titanium. Such materials can absorb impurities from the surrounding and dissolve them inside the layer. In order to eliminate this problem, in 2000 a new approach was proposed to perform arc discharges at the ultra-high vacuum (UHV) conditions. It was demonstrated experimentally that the deposited pure Nb-films have similar properties to the bulk-Nb samples. These results are very promising from the point of the application of such coating processes in super-conducting RF cavities of future charged-particle accelerators. The paper describes different methods used for the reduction of the background pressure in the UHV stand below 10 -10 hPa. The most important methods involve the selection of appropriate materials and the backing of whole vacuum system. In order to reduce the contaminants a laser triggering system has been applied instead of a common system, which used high-voltage discharges along the surface of an insulated trigger electrode. Particular attention is paid to a comparison of different gas conditions during arc discharges at high-vacuum conditions (background pressure in the range of 10 -8 -10 -7 hPa) and at UHV experiments (background pressure within the range of 10 -11

  8. Role of open boundary conditions on the hysteretic behaviour of one-dimensional spin crossover nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Chiruta, Daniel [GEMaC, Université de Versailles Saint-Quentin-en-Yvelines, CNRS-UVSQ (UMR 8635), 78035 Versailles Cedex (France); Faculty of Electrical Engineering and Computer Science, Stefan cel Mare University, Suceava 720229 (Romania); Linares, Jorge, E-mail: jorge.linares@uvsq.fr, E-mail: miya@spin.phys.s.u-tokyo.ac.jp; Boukheddaden, Kamel [GEMaC, Université de Versailles Saint-Quentin-en-Yvelines, CNRS-UVSQ (UMR 8635), 78035 Versailles Cedex (France); Miyashita, Seiji, E-mail: jorge.linares@uvsq.fr, E-mail: miya@spin.phys.s.u-tokyo.ac.jp [Department of Physics, Graduate School of Science, University of Tokyo, Bunkyo-Ku, Tokyo (Japan); CREST, JST, 4-1-8 Honcho Kawaguchi, Saitama 332-0012 (Japan)

    2014-05-21

    In order to explain clearly the role of the open boundary conditions (OBCs) on phase transition in one dimensional system, we consider an Ising model with both short-range (J) and long-range (G) interactions, which has allowed us to study the cooperative nature of spin-crossover (SCO) materials at the nanometer scale. At this end, we developed a transfer-matrix method for one-dimensional (1D) SCO system with free boundary conditions, and we give numerical evidences for how the thermal spin transition curves vary as a function of the physical parameters (J, G) or an applied pressure. Moreover for OBCs case, we have derived the bulk, surface and finite-size contributions to the free energy and we have investigated the variation of these energies as function of J and system size. We have found that the surface free energy behaves like J〈σ〉{sup 2}, where 〈σ〉 is the average magnetization per site. Since the properties of the nanometric scale are dramatically influenced by the system's size (N), our analytical outcomes for the size dependence represent a step to achieve new characteristic of the future devices and also a way to find various novel properties which are absent in the bulk materials.

  9. Urban and marine corrosion: Comparative behaviour between field and laboratory conditions

    Energy Technology Data Exchange (ETDEWEB)

    Iribarren Laco, J.I.; Liesa Mestres, F.; Bilurbina Alter, L. [Departament d' Enginyeria Quimica E.T.S.E.I.B. Universitat Politecnica de Catalunya, Barcelona (Spain); Cadena Villota, F. [Departamento de Materiales, Escuela Politecnica Nacional, Quito (Ecuador)

    2004-09-01

    A detailed study of the corrosion phenomena of carbon steel has been investigated in this work by means of the comparison of field and laboratory tests. Two areas of the metropolitan area of Barcelona (Spain) were selected to carry out the field tests, whereas two different solutions of sodium chloride and sodium hydrogen sulfite were used to simulate the field conditions by means of cyclic laboratory tests. The corrosion rate has been evaluated from the weight loss of the specimens and the morphology surface has been visualized by optical and scanning electron microscopy. Corrosion products and contaminants have been analyzed by X-ray diffraction and energy-dispersive X-ray spectroscopy, respectively. The penetration results can be adjusted to the Passano equation and the corrosivity degree can be assigned in accordance with ISO standards. A correlation between field and laboratory tests has been found, by comparing the specimens with the same degree of corrosion, showing the validity of the accelerated laboratory tests in order to simulate the field conditions. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  10. Biodegradation Behaviour of Thermoplastic Starch Films Derived from Tacca leontopetaloides Starch under Controlled Composting Condition

    Science.gov (United States)

    Amin, A. M. Mohd; Sauid, S. Mohd; Hamid, K. H. Ku; Musa, M.

    2018-05-01

    The biodegradation study of thermoplastic starch (TPS) films derived from Tacca leontopetaloides starch; namely TPS/GLY, TPS/ACE and TPS/BCHR were investigated under controlled composting conditions. A manual set-up test rig in laboratory scale was built according to ISO 14855-1: 2012. The biodegradation percentage was determined by measuring the amount of CO2 evolved using titration method and validated by automatic system (Arduino UNO System) that detected the CO2 evolved. After 45 days under controlled composting condition, results indicated that TPS/GLY degraded the fastest, followed by TPS/BCHR and the TPS/ACE had the slowest degradation. The biodegradation process of TPS/GLY, TPS/ACE and TPS/BCHR also exhibited two stages with different degradation speeds. From these results, it indicated that chemical modification of the TPS films by adding acetic acid and rice husk bio-char to the thermoplastic starch can have a major impact on the biodegradation rate and final biodegradation percentage.

  11. Water reactor fuel behaviour and fission products release in off-normal and accident conditions

    International Nuclear Information System (INIS)

    1987-09-01

    The present meeting was scheduled by the International Atomic Energy Agency upon the proposal of the Members of the International Working Group on Water Reactor Fuel Performance and Technology and held at the IAEA Headquarters in Vienna from 10 to 13 November 1986. Thirty participants from 17 countries and an international organization attended the meeting. Eighteen papers were presented from 13 countries and one international organization. The meeting was composed of four sessions and covered subjects related to: physico-chemical properties of core materials under off-normal conditions, and their interactions up to and after melt-down (5 papers); core materials deformation, relocation and core coolability under (severe) accident conditions (4 papers); fission products release: including experience, mechanisms and modelling (5 papers); power plant experience (4 papers). A separate abstract was prepared for each of these 18 papers. Four working groups covering the above-mentioned topics were held to discuss the present status of the knowledge and to develop recommendations for future activities in this field. Refs, figs and tabs

  12. Burnout behaviour of bituminous coals in air-staged combustion conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kluger, F.; Spliethoff, H.; Hein, K.R.G. [University of Stuttgart, Stuttgart (Germany). Inst. of Process Engineering and Power Plant (IVD)

    2001-07-01

    In order to determine the influence on burnout by the combustion conditions and the coal preparation, three bituminous coals sold on the world market, from three different locations in Poland, South Africa, and Australia, were studied more closely. For this purpose, the coals were ground in two different particle size ranges, which, besides the influence of the combustion conditions, such a temperature, residence time, and stoichiometry, made it possible to also investigate the impact on burnout by the coal preparation. The experiments were carried out in an electrically heated entrained-flow reactor with a thermal input of 8.5 kW. The parameters for the experiments are wall temperature (1000-1350{degree}C), air ratio (0.6-1.15) and two particle sizes (70% {lt} 75 {mu}m, 90% {lt} 75 {mu}m). The results show that in general, for increasing temperatures, the burnout quality will improve. For the Australian Illawara coal, another outcome is increased NOx emissions. Lowering the air ratio in the reduction zone leads to less NOx emission but to increased unburnt matter in ash. For the smaller particle size fraction, the analysis of the different particle sizes shows an improvement of the burnout without a change in NOx emissions. 10 refs., 10 figs., 2 tabs.

  13. Surface adsorption behaviour of milk whey protein and pectin mixtures under conditions of air-water interface saturation.

    Science.gov (United States)

    Perez, Adrián A; Sánchez, Cecilio Carrera; Patino, Juan M Rodríguez; Rubiolo, Amelia C; Santiago, Liliana G

    2011-07-01

    Milk whey proteins (MWP) and pectins (Ps) are biopolymer ingredients commonly used in the manufacture of colloidal food products. Therefore, knowledge of the interfacial characteristics of these biopolymers and their mixtures is very important for the design of food dispersion formulations (foams and/or emulsions). In this paper, we examine the adsorption and surface dilatational behaviour of MWP/Ps systems under conditions in which biopolymers can saturate the air-water interface on their own. Experiments were performed at constant temperature (20 °C), pH 7 and ionic strength 0.05 M. Two MWP samples, β-lactoglobulin (β-LG) and whey protein concentrate (WPC), and two Ps samples, low-methoxyl pectin (LMP) and high-methoxyl pectin (HMP) were evaluated. The contribution of biopolymers (MWP and Ps) to the interfacial properties of mixed systems was evaluated on the basis of their individual surface molecular characteristics. Biopolymer bulk concentration capable of saturating the air-water interface was estimated from surface pressure isotherms. Under conditions of interfacial saturation, dynamic adsorption behaviour (surface pressure and dilatational rheological characteristics) of MWP/Ps systems was discussed from a kinetic point of view, in terms of molecular diffusion, penetration and configurational rearrangement at the air-water interface. The main adsorption mechanism in MWP/LMP mixtures might be the MWP interfacial segregation due to the thermodynamic incompatibility between MWP and LMP (synergistic mechanism); while the interfacial adsorption in MWP/HMP mixtures could be characterized by a competitive mechanism between MWP and HMP at the air-water interface (antagonistic mechanism). The magnitude of these phenomena could be closely related to differences in molecular composition and/or aggregation state of MWP (β-LG and WPC). Copyright © 2011 Elsevier B.V. All rights reserved.

  14. submitter Elemental composition and clustering behaviour of α-pinene oxidation products for different oxidation conditions

    CERN Document Server

    Praplan, A P; Bianchi, F; Rissanen, M P; Ehn, M; Jokinen, T; Junninen, H; Adamov, A; Amorim, A; Dommen, J; Duplissy, J; Hakala, J; Hansel, A; Heinritzi, M; Kangasluoma, J; Kirkby, J; Krapf, M; Kürten, A; Lehtipalo, K; Riccobono, F; Rondo, L; Sarnela, N; Simon, M; Tomé, A; Tröstl, J; Winkler, P M; Williamson, C; Ye, P; Curtius, J; Baltensperger, U; Donahue, N M; Kulmala, M; Worsnop, D R

    2015-01-01

    This study presents the difference between oxidised organic compounds formed by α-pinene oxidation under various conditions in the CLOUD environmental chamber: (1) pure ozonolysis (in the presence of hydrogen as hydroxyl radical (OH) scavenger) and (2) OH oxidation (initiated by nitrous acid (HONO) photolysis by ultraviolet light) in the absence of ozone. We discuss results from three Atmospheric Pressure interface Time-of-Flight (APi-TOF) mass spectrometers measuring simultaneously the composition of naturally charged as well as neutral species (via chemical ionisation with nitrate). Natural chemical ionisation takes place in the CLOUD chamber and organic oxidised compounds form clusters with nitrate, bisulfate, bisulfate/sulfuric acid clusters, ammonium, and dimethylaminium, or get protonated. The results from this study show that this process is selective for various oxidised organic compounds with low molar mass and ions, so that in order to obtain a comprehensive picture of the elemental composition o...

  15. An experiment to examine the mechanistic behaviour of irradiated CANDU fuel stored under dry conditions

    International Nuclear Information System (INIS)

    Oldaker, I.E.; Crosthwaite, J.L.; Keltie, R.J.; Truss, K.J.

    1979-01-01

    A program has begun to use the Whiteshell Nuclear Research Establishment dry-storage canisters to store some selected CANDU irradiated fuel bundles in an 'easily retrievable basket.' The object of the experimental program is to study the long-term stability of the Zircaloy-sheathed UO 2 and UC fuel elements when stored in air. Bundles were loaded into a canister in October 1979 following detailed examination and removal of up to three complete elements from most bundles. These elements are currently being subjected to detailed destructive examinations, including metallography and scanning electron micrography, to fully characterize their pre-storage condition. After four years, and every five years thereafter, further elements will be examined similarly to study the effects of the storage environment on the stability of the Zircaloy sheathing, and on its continued ability to contain the fuel safely in an interim storage facility. (author)

  16. Long term behaviour of glass and steel in interaction with argillites in deep geological conditions

    International Nuclear Information System (INIS)

    Bildstein, O.; Lartigue, J.E.; Devallois, V.; Pointeau, V.; Trotignon, L.; Michau, N.; Cochepin, B.; Munier, I.

    2010-01-01

    Document available in extended abstract form only. The concept developed in France for the disposal of vitrified high level waste in deep geological repository includes the containment in steel canisters, designed to prevent contact between glass and water and to maintain mechanical stability, and the confinement at ca. 500 m into an argillaceous host rock. After canister disposal and repository closure, the site will progressively re-saturate in non-isothermal conditions and the alteration of the different materials will start: corrosion of the canisters, degradation of concrete plugs, and ultimately, the alteration of glass waste. These perturbations will affect the properties of the different materials present in the near field and the lifetime of the glass matrix. Several scenarios are investigated which all involve (1) the geochemical interactions between iron and clay-rich materials, and (2) the alteration of glass in the presence of corrosion products. The evolution of the near field system is complex since geochemical and transport processes are highly coupled. Steel corrosion and glass alteration produce an increase of pH which in turn affects the rate of glass dissolution. The concentration of dissolved silica is also one key to the rate of glass alteration and, along with the concentration of other elements such as iron and aluminum, it determines the nature of steel corrosion and clay alteration products. These interactions may also lead to partial dissolution of the initial clay minerals potentially affecting the overall confinement properties such as swelling and capacity to exchange cations. Coupled reaction-transport simulations with the Crunch code was used to assess the impact of steel corrosion and glass alteration phases in the presence of corrosion products (CP), looking at mass transfer for chemical elements, especially iron and silicon, pH, porosity change. A first set of calculations based on a reference case in isothermal conditions (90 deg

  17. Behaviour of crossbred does and their kids at parturition under extensive and intensive conditions.

    Science.gov (United States)

    Mellado, Miguel; Véliz, Francisco G; García, José E; De Santiago, Ángeles

    2012-03-01

    Data from 82 kiddings from mixed-breed (native x dairy goats) goats reared on rangeland (n = 47) or confinement (n = 35) were used to determine the influence of various factors on length of labour, standing of newborn kids and time to first suckling in pluriparous goats. Both groups were mated at the same time to bucks of the same genotype in February. During the kidding time in July, the goats were monitored for 24 h in order to register parturition traits and kid birth weight and body measurements. For all goats, blood samples were collected at parturition in order to establish the nutritional state of goats. Grazing goats had lower body weight and body condition score (P kiddings (>93%) occurred during daylight hours. No kiddings were registered from 2300 to 0500 hours. No effects of height at withers, thoracic circumference and sex of kids at birth were found to influence length of labour. Labour was shorter (P kids was shorter (P kids from litters weighing >3.3 kg (entire litter) than kids from litters with kids delivered from pen-fed does than kids from grazing does (57.8 ± 7.57 min vs. 42.9 ± 3.05 min). These results confirm that, independently of type of production system (intensive or extensive), kiddings of does are concentrated during daylight hours. These results also indicate that conformation of kids does not alter duration of labour, and that nutritional stress of goats during gestation (extensive conditions) does not interfere with the neonate's level of alertness and arousal.

  18. Hydrological behaviour of sealing under different soil management conditions in the Center South Cordoba, Argentina

    International Nuclear Information System (INIS)

    Bricchi, E.

    2004-01-01

    The susceptibility of soils to form seals induced by rain depends on a combination of physical, chemical and biological processes, which are, indeed, affected by climatic characteristics and the type of soil. If we consider the weather factors, the energy of rain, as a function of quantity and intensity, is the most important one. The soil properties that favor the formation of sealing are texture, organic matter content, structural stability and sodium adsorption relationship. Regarding texture, silt is the particle, which is most highly involved. In central Argentina, specifically in the central southern region of Cordoba Province, the most representative soils show a low content of clays and a high content of silt and fine sand. This land has undergone different production systems, not only agricultural ones but also combined systems, as summer crops, with intense labouring and scarce, even lacking, stubble supply. Therefore these soils have had important loss in organic matter, degradation of the structure of the superficial horizons. It became necessary, then, to look for a combination of technologies leading to an energy input throughout conservation tillage systems, soil covering and agrochemicals which tend to improve soil quality in order to obtain a sustainable production. The trial was conducted by using a simple at-random design with two repetitions for each treatment. Only in F the initial saturated hydraulic conductivity (K si ) (non-sealing condition) and the final hydraulic conductivity (K sf ) (sealing conditions) were determined in the superficial of soil in 2000, by means of a rain simulator using an intensity up to 50 mm/h for 60 minutes (kinetic energy of 0.1336 J.cm -2 ). The K s values obtained by applying Darcy's equation were used to fit the Horton type exponential decay function which describes Ks as a function of the time of exposure to a simulated rain. It can be concluded that the removal of natural vegetation and crop systems have

  19. Tribological Behaviour of Ti:Ta-DLC Films Under Different Tribo-Test Conditions

    Science.gov (United States)

    Efeoglu, İhsan; Keleş, Ayşenur; Totik, Yaşar; Çiçek, Hikmet; Emine Süküroglu, Ebru

    2018-01-01

    Diamond-like carbon (DLC) films are suitable applicants for cutting tools due to their high hardness, low friction coefficient and wear rate. Doping metals in DLC films have been improved its tribological properties. In this study, titanium and tantalum doped hydrogenated DLC films were deposited by closed-field unbalanced magnetron sputtering system onto M2 high speed steels in Ar/N2/C2H2 atmosphere. The friction and wear properties of Ti:Ta-DLC film were investigated under different tribo-test conditions including in atmospheric pressure, distilled water, commercial oil and Ar atmosphere. The coated specimens were characterized by SEM and X-ray diffraction techniques. The bonding state of C-C (sp3) and C=C (sp2) were obtained with XPS. The tribological properties of Ti:Ta-DLC were investigated with pin-on-disc wear test. Hardness measurements performed by micro-indentation. Our results suggest that Ti:Ta-doped DLC film shows very dense columnar microstructure, high hardness (38.2 GPa) with low CoF (µ≈0.02) and high wear resistance (0.5E-6 mm3/Nm).

  20. Influence of Aging Conditions on Fatigue Fracture Behaviour of 6063 Aluminum Alloy

    Directory of Open Access Journals (Sweden)

    Rafiq Ahmed Siddiqui

    2001-12-01

    Full Text Available Aluminum - Magnesium - Silicon (Al-Mg-Si 6063 alloy was heat-treated using under aged, peak aged and overage temperatures. The numbers of cycles required to cause the fatigue fracture, at constant stress, was considered as criteria for the fatigue resistance. Moreover, the fractured surface of the alloy at different aging conditions was evaluated by optical microscopy and the Scanning Electron Microscopy (SEM. The SEM micrographs confirmed the cleavage surfaces with well-defined fatigue striations. It has been observed that the various aging time and temperature of the 6063 Al-alloy, produces different modes of fractures. The most suitable age hardening time and temperature was found to be between 4 to 5 hours and to occur at 460 K. The increase in fatigue fracture property of the alloy due to aging could be attributed to a vacancy assisted diffusion mechanism or due to pinning of dislocations movement by the precipitates produced during aging. However, the decrease in the fatigue resistance, for the over aged alloys, might be due to the coalescence of precipitates into larger grains.

  1. Effect of Boundary Condition on the Shear Behaviour of Rock Joints in the Direct Shear Test

    Science.gov (United States)

    Bahaaddini, M.

    2017-05-01

    The common method for determination of the mechanical properties of the rock joints is the direct shear test. This paper aims to study the effect of boundary condition on the results of direct shear tests. Experimental studies undertaken in this research showed that the peak shear strength is mostly overestimated. This problem is more pronounced for steep asperities and under high normal stresses. Investigation of the failure mode of these samples showed that tensile cracks are generated at the boundary of sample close to the specimen holders and propagated inside the intact materials. In order to discover the reason of observed failure mechanism in experiments, the direct shear test was simulated using PFC2D. Results of numerical models showed that the gap zone size between the upper and lower specimen holders has a significant effect on the shear mechanism. For the high gap size, stresses concentrate at the vicinity of the tips of specimen holders and result in generation and propagation of tensile cracks inside the intact material. However, by reducing the gap size, stresses are concentrated on asperities, and damage of specimen at its boundary is not observed. Results of this paper show that understanding the shear mechanism of rock joints is an essential step prior to interpreting the results of direct shear tests.

  2. Crack growth behaviour of low-alloy steels for pressure boundary components under transient light water reactor operating conditions - CASTOC, Part II: WWER conditions

    Energy Technology Data Exchange (ETDEWEB)

    Ernestova, M.; Zamboch, M. [Nuclear Research Institute, NRI, Rez (Czech Republic); Devrient, B.; Roth, A. [Framatome ANP GmbH, Erlangen (Germany); Ehrnsten, U. [VTT Industrial Systems, Espoo (Finland); Foehl, J.; Weissenberg, T. [Staatliche Materialpruefungsanstalt, MPA, Stuttgart (Germany); Gomez-Briceno, D.; Lapena, J. [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas, CIEMAT, Madrid (Spain); Ritter, S.; Seifert, H.P. [Paul Scherrer Institute, PSI, Villigen (Switzerland)

    2004-07-01

    One of the ageing phenomena of pressure boundary components of light water reactors (LWRs) is environmentally-assisted cracking (EAC). The project CASTOC (5. Framework Programme of the EU) was launched September 2000 with six European partners and terminated August 2003. It focused in particular on the EAC behaviour of low-alloy steels (LAS) and to some extent to weld metal, heat affected zone and the influence of an austenitic cladding. The main objective was directed to the clarification of crack growth behavior of LAS in high-temperature water due to EAC under constant load (steady-state power operation), to study the effect of transient conditions (during operation or start-up/shut-down of a plant) using their impact on time-based and cycle-based crack growth rates and to a more detailed understanding of the acting mechanisms. Autoclave tests were performed with Western and Russian type reactor pressure vessel steels under simulated boiling water reactor (BWR)/normal water chemistry (NWC) and pressurized water reactor (WWER) conditions. The investigations were performed with fracture mechanics specimens of different sizes and geometries. The applied loading comprised cyclic loads, static loads and load spectra where the static load was periodically interrupted by partial unloading. With regard to water chemistry, the oxygen content (WWER) and impurities of sulphate and chlorides (BWR) were varied beyond allowable limits for continuous operation. The current paper summarizes the most important crack growth results obtained under simulated WWER conditions. The influence of oxygen content and the effect of specimen size (C(T)25 versus C(T)50 specimens) on the crack growth rates are shown. The results are discussed in the context of the current crack growth rate curves in the corresponding nuclear codes. (authors)

  3. Crack growth behaviour of low-alloy steels for pressure boundary components under transient light water reactor operating conditions - CASTOC, Part II: WWER conditions

    International Nuclear Information System (INIS)

    Ernestova, M.; Zamboch, M.; Devrient, B.; Roth, A.; Ehrnsten, U.; Foehl, J.; Weissenberg, T.; Gomez-Briceno, D.; Lapena, J.; Ritter, S.; Seifert, H.P.

    2004-01-01

    One of the ageing phenomena of pressure boundary components of light water reactors (LWRs) is environmentally-assisted cracking (EAC). The project CASTOC (5. Framework Programme of the EU) was launched September 2000 with six European partners and terminated August 2003. It focused in particular on the EAC behaviour of low-alloy steels (LAS) and to some extent to weld metal, heat affected zone and the influence of an austenitic cladding. The main objective was directed to the clarification of crack growth behavior of LAS in high-temperature water due to EAC under constant load (steady-state power operation), to study the effect of transient conditions (during operation or start-up/shut-down of a plant) using their impact on time-based and cycle-based crack growth rates and to a more detailed understanding of the acting mechanisms. Autoclave tests were performed with Western and Russian type reactor pressure vessel steels under simulated boiling water reactor (BWR)/normal water chemistry (NWC) and pressurized water reactor (WWER) conditions. The investigations were performed with fracture mechanics specimens of different sizes and geometries. The applied loading comprised cyclic loads, static loads and load spectra where the static load was periodically interrupted by partial unloading. With regard to water chemistry, the oxygen content (WWER) and impurities of sulphate and chlorides (BWR) were varied beyond allowable limits for continuous operation. The current paper summarizes the most important crack growth results obtained under simulated WWER conditions. The influence of oxygen content and the effect of specimen size (C(T)25 versus C(T)50 specimens) on the crack growth rates are shown. The results are discussed in the context of the current crack growth rate curves in the corresponding nuclear codes. (authors)

  4. Tailored preconceptional dietary and lifestyle counselling in a tertiary outpatient clinic in the Netherlands

    NARCIS (Netherlands)

    Hammiche, F.; Laven, J.S.E.; Mil, van N.; Cock, M.; Vries, de J.H.M.; Lindemans, J.; Steegers, E.A.P.; Steegers-Theunissen, R.P.M.

    2011-01-01

    BACKGROUND Adverse reproductive performance has been linked to unhealthy dietary intake and lifestyles. Our objectives were to investigate the prevalence of unhealthy dietary intake and lifestyles before conception and to evaluate whether tailored preconception counselling modifies these behaviours.

  5. Does dependency make a difference? The role of convenience, social influence, facilitating condition and self-efficacy on student's purchase behaviour of smartphone

    Science.gov (United States)

    Jaganathan, Mathivannan; Mustapa, Azrain Nasyrah; Hasan, Wan Azlina Wan; Mat, Nik Kamariah Nik; Alekam, Jamal Mohammed Esmail

    2014-12-01

    It is an undeniable fact that penetration level and usage and sales of Smartphone dramatically increased past few years, whereby; it has increased to almost 60 percent of total population. Despite the high penetration of smartphone, previous studies have exhibited inconsistent findings towards understanding the behavioural intention to use smartphone especially among university students. Thus, the purpose of this study is to examine purchasing behaviour of Smartphone among students. From the literature, five antecedents of purchasing behaviour were identified. Each variable is measured using 7-point Likert scale: convenience (10 items), social influence (6 items), self-efficacy (10 items), facilitating condition (11 items), dependency (14 items) and purchasing behaviour (4 items). Using the primary data collection method, 400 questionnaires were distributed to the target respondents of one of the public higher education in the northern region. The responses collected were 350 completed questionnaires representing 87.5 percent response rate. The data were analysed using Structural Equation Modeling (SEM) using AMOS. Confirmatory factor analysis of measurement models indicates adequate goodness or fit after few items were eliminated through modification indices verifications. Therefore, goodness of fit for the generated structural model shows the adequate fit. This study has established four direct significant causal effects and two significant mediating effects: (1) convenience and dependency, (2) social influence and dependency, (3) facilitating condition and purchase behaviour, (4), dependency and purchase behaviour. The significant mediating results are: (1). Dependency mediates the relationship between convenience and purchase behaviour; (2) dependency mediates social influence and purchase behaviour. Thus, findings suggested that convenience, social influence and dependency play a role in determining students purchase behaviour of smartphone. The researchers

  6. Re-evaluation of the sorption behaviour of Bromide and Sulfamethazine under field conditions using leaching data and modelling methods

    Science.gov (United States)

    Gassmann, Matthias; Olsson, Oliver; Höper, Heinrich; Hamscher, Gerd; Kümmerer, Klaus

    2016-04-01

    The simulation of reactive transport in the aquatic environment is hampered by the ambiguity of environmental fate process conceptualizations for a specific substance in the literature. Concepts are usually identified by experimental studies and inverse modelling under controlled lab conditions in order to reduce environmental uncertainties such as uncertain boundary conditions and input data. However, since environmental conditions affect substance behaviour, a re-evaluation might be necessary under environmental conditions which might, in turn, be affected by uncertainties. Using a combination of experimental data and simulations of the leaching behaviour of the veterinary antibiotic Sulfamethazine (SMZ; synonym: sulfadimidine) and the hydrological tracer Bromide (Br) in a field lysimeter, we re-evaluated the sorption concepts of both substances under uncertain field conditions. Sampling data of a field lysimeter experiment in which both substances were applied twice a year with manure and sampled at the bottom of two lysimeters during three subsequent years was used for model set-up and evaluation. The total amount of leached SMZ and Br were 22 μg and 129 mg, respectively. A reactive transport model was parameterized to the conditions of the two lysimeters filled with monoliths (depth 2 m, area 1 m²) of a sandy soil showing a low pH value under which Bromide is sorptive. We used different sorption concepts such as constant and organic-carbon dependent sorption coefficients and instantaneous and kinetic sorption equilibrium. Combining the sorption concepts resulted in four scenarios per substance with different equations for sorption equilibrium and sorption kinetics. The GLUE (Generalized Likelihood Uncertainty Estimation) method was applied to each scenario using parameter ranges found in experimental and modelling studies. The parameter spaces for each scenario were sampled using a Latin Hypercube method which was refined around local model efficiency maxima

  7. Determination of turbine runner dynamic behaviour under operating condition by a two-way staggered fluid-structureinteraction method

    International Nuclear Information System (INIS)

    Dompierre, F; Sabourin, M

    2010-01-01

    This paper presents the application of the two-way fluid-structure interaction method introduced by ANSYS to calculate the dynamic behaviour of a Francis turbine runner under operating condition. This time-dependant calculation directly takes into account characteristics of the flow and particularly the pressure fluctuations caused by the rotor-stator interaction. This formulation allows the calculation of the damping forces of the whole system implicitly. Thereafter, the calculated dynamic stress can be used for a fatigue analysis. A verification of the mechanical and fluid simulations used as input for the fluid-structure interaction calculation is first performed. Subsequently, a connection of these two independent simulations is made. A validation according to the hydraulic conditions is made with the measurements from the scale model testing. Afterwards, the static displacement of the runner under the hydraulic load is compared with the results of a classical static analysis for verification purposes. Finally, the natural frequencies deduced by the post-processing of the dynamic portion of the runner displacement with respect to time are compared with the natural frequencies obtained from a classical acoustic modal analysis. All comparisons show a good agreement with experimental data or results obtained with conventional methods.

  8. Effect of constant and uniform heat generation on the thermal behaviour of porous solids with asymmetric boundary conditions

    International Nuclear Information System (INIS)

    Heggs, P.J.; Dare, J.

    2007-01-01

    The generation of heat due to chemical reaction will have a significant effect on the temperature profile and heat transfer within a porous body. Most forms of analysis only consider the symmetric situation or else make use of various assumptions that greatly simplify the analysis, for example: the Semenov or the Frak-kamenetskii models. The objective of this paper is to develop an improved understanding of the thermal behaviour of a porous body with uniform internal heat generation, which is in contact with two fluids at different temperatures and with different heat transfer coefficients. The mathematical representation is a one dimensional Poisson equation with asymmetric boundary conditions. The analytical solution reveals four regimes for heat flow: (a) purely conduction at zero heat generation, (b) a combination of heat flow by conduction through the body between the hot and cold fluids and all heat generated passing to the colder fluid, (c) no heat flow by conduction between the two fluids and all heat generated passing the cold flow - the so-called critical heat generation, and (d) the heat generated passes to both the cold and hot fluids and there is a maximum temperature within the body greater than that of the hot fluid, the so-called supercritical region. Expressions are developed to allow predictions of the conditions pertaining to each regime. This new representation covers the Semenov and Frank-Kamenetskii models and all possible solutions intermediate of the them. (authors)

  9. Determination of turbine runner dynamic behaviour under operating condition by a two-way staggered fluid-structureinteraction method

    Energy Technology Data Exchange (ETDEWEB)

    Dompierre, F; Sabourin, M, E-mail: frederick.dompierre@power.alstom.co [Alstom Power Systems, Hydro 1350 chemin Saint-Roch, Sorel-Tracy (Quebec), J3R 5P9 (Canada)

    2010-08-15

    This paper presents the application of the two-way fluid-structure interaction method introduced by ANSYS to calculate the dynamic behaviour of a Francis turbine runner under operating condition. This time-dependant calculation directly takes into account characteristics of the flow and particularly the pressure fluctuations caused by the rotor-stator interaction. This formulation allows the calculation of the damping forces of the whole system implicitly. Thereafter, the calculated dynamic stress can be used for a fatigue analysis. A verification of the mechanical and fluid simulations used as input for the fluid-structure interaction calculation is first performed. Subsequently, a connection of these two independent simulations is made. A validation according to the hydraulic conditions is made with the measurements from the scale model testing. Afterwards, the static displacement of the runner under the hydraulic load is compared with the results of a classical static analysis for verification purposes. Finally, the natural frequencies deduced by the post-processing of the dynamic portion of the runner displacement with respect to time are compared with the natural frequencies obtained from a classical acoustic modal analysis. All comparisons show a good agreement with experimental data or results obtained with conventional methods.

  10. Ceramic laminates with tailored residual stresses

    Directory of Open Access Journals (Sweden)

    Baudín, C.

    2009-12-01

    Full Text Available Severe environments imposed by new technologies demand new materials with better properties and ensured reliability. The intrinsic brittleness of ceramics has forced scientists to look for new materials and processing routes to improve the mechanical behaviour of ceramics in order to allow their use under severe thermomechanical conditions. The laminate approach has allowed the fabrication of a new family of composite materials with strength and reliability superior to those of monolithic ceramics with microstructures similar to those of the constituent layers. The different ceramic laminates developed since the middle 1970´s can be divided in two large groups depending on whether the development of residual stresses between layers is the main design tool. This paper reviews the developments in the control and tailoring of residual stresses in ceramic laminates. The tailoring of the thickness and location of layers in compression can lead to extremely performing structures in terms of strength values and reliability. External layers in compression lead to the strengthening of the structure. When relatively thin and highly compressed layers are located inside the material, threshold strength, crack bifurcation and crack arrest during fracture occur.

    Las severas condiciones de trabajo de las nuevas aplicaciones tecnológicas exigen el uso de materiales con mejores propiedades y alta fiabilidad. La potencialidad de uso de materiales frágiles, como los cerámicos, en estas aplicaciones exige el desarrollo de nuevos materiales y métodos de procesamiento que mejoren su comportamiento mecánico. El concepto de material laminado ha permitido la fabricación de una nueva familia de materiales con tensiones de fractura y fiabilidad superiores a las de materiales monolíticos con microestructuras similares a las de las láminas que conforman el laminado. Los distintos materiales laminados desarrollados desde mediados de los años 70 se pueden

  11. Crack growth behaviour of low alloy steels for pressure boundary components under transient light water reactor operating conditions (CASTOC)

    International Nuclear Information System (INIS)

    Foehl, J.; Weissenberg, T.; Gomez-Briceno, D.; Lapena, J.; Ernestova, M.; Zamboch, M.; Seifert, H.P.; Ritter, S.; Roth, A.; Devrient, B.; Ehrnsten, U.

    2004-01-01

    The CASTOC project addresses environmentally assisted cracking (EAC) phenomena in low alloy steels used for pressure boundary components in both Western type boiling water reactors (BWR) and Russian type pressurised water reactors (VVER). It comprises the four work packages (WP): inter-laboratory comparison test (WP1); EAC behaviour under static load (WP2), EAC behaviour under cyclic load and load transients (WP3); evaluation of the results with regard to their relevance for components in practice (WP4). The use of sophisticated test facilities and measurement techniques for the on-line detection of crack advances have provided a more detailed understanding of the mechanisms of environmentally assisted cracking and provided quantitative data of crack growth rates as a function of loading events and time, respectively. The effect of several major parameters controlling EAC was investigated with particular emphasis on the transferability of the results to components in service. The obtained crack growth rate data were reflected on literature data and on commonly applied prediction curves as presented in the appropriate Code. At relevant stress intensity factors it could be shown that immediate cessation of growing cracks occurs after changing from cyclic to static load in high purity oxygenated BWR water and oxygen-free VVER water corresponding to steady state operation conditions. Susceptibility to environmentally assisted cracking under static load was observed for a heat affected zone material in oxygenated high purity water and also in base materials during a chloride transient representing BWR water condition below Action Level 1 of the EPRI Water Chemistry Guidelines according to the lectrical conductivity of the water but in the range of Action Level 2 according to the content of chlorides. Time based crack growth was also observed in one Russian type base material in oxygenated VVER water and in one Western type base material in oxygenated high purity BWR

  12. The effect of nutrition and body condition of triplet-bearing ewes during late pregnancy on the behaviour of ewes and lambs.

    Science.gov (United States)

    Gronqvist, Gabriella V; Corner-Thomas, Rene A; Kenyon, Paul R; Stafford, Kevin J; Morris, Stephen T; Hickson, Rebecca Edith

    2018-04-12

    Triplet-born lambs are less likely to survive to weaning than twin-born or single-born lambs. Appropriate ewe-lamb bonding behaviours and lamb vigour behaviours are necessary for survival of lambs. The aim of this experiment was to determine whether maternal nutrition during late pregnancy influenced behaviour of the ewe and her lambs soon after birth, and to determine whether mid-pregnancy body condition score (BCS) influenced any behavioural response. The experiments included ewes that were in BCS 2.0, 2.5 or 3.0 in mid-pregnancy and were fed either ad libitum or to pregnancy-maintenance requirements in late-pregnancy (day 115 until 136 in experiment one, and day 128 until 141 in experiment two). The time taken for lambs to stand, contact dam, suck from dam and follow dam was recorded three to 18 hours after birth. The number of high- and low-pitched bleats emitted by the ewe and lambs was recorded, along with maternal behaviour score (MBS) of the ewe. Lambs in experiment two underwent a maternal-recognition test at 12 or 24 h. There were significant effects of feeding treatment on bleating behaviour of ewes and lambs, but these were inconsistent among BCS groups and between experiments. Lamb vigour behaviours were not affected by feeding treatment. In experiment one, there was no effect of feeding treatment or BCS on MBS, but in experiment two, ewes in BCS3 in mid-pregnancy had greater MBS than ewes in BCS2 in mid-pregnancy (MBS 3.1/5 vs MBS 2.1/5; Pewes and lambs, ad libitum feeding rather than feeding for pregnancy-maintenance requirements can not be used to improve behaviours soon after birth of triplet-bearing ewes in BCS 2 - 3 and their lambs in extensive pastoral conditions.

  13. Habitat use, vertical and horizontal behaviour of Atlantic bluefin tuna (Thunnus thynnus) in the Northwestern Mediterranean Sea in relation to oceanographic conditions

    Science.gov (United States)

    Bauer, Robert Klaus; Fromentin, Jean-Marc; Demarcq, Hervé; Bonhommeau, Sylvain

    2017-07-01

    We investigated the habitat utilization, vertical and horizontal behaviour of Atlantic bluefin tuna Thunnus thynnus (ABFT) in relation to oceanographic conditions in the northwestern Mediterranean Sea, based on 36 pop-up archival tags and different environmental data sets. Tags were deployed on early mature ABFT (127-255 cm) between July and November in 2007-2014, on the shelf area off Marseille, France. The data obtained from these tags provided 1643 daily summaries of ABFT vertical behaviour over 8 years of tag deployment. Based on a hierarchical clustering of this data, we could identify four principle daily vertical behaviour types, representing surface (≦ 10 m) and subsurface (10-100 m) orientation, moderate (50-200 m) and deep (≧ 200 m) diving behaviour. These vertical behaviour types showed seasonal variations with partly opposing trends in their frequencies. Accordingly, ABFT were more surface orientated during summer, while moderate diving behaviour was more common during winter. Depth time series data further revealed inverted day-night patterns for both of these periods. Tagged ABFT frequented the surface waters more regularly during daytime and deeper waters during the night in summer, while the opposite pattern was found in winter. Seasonal changes in the vertical behaviour of ABFT were accompanied by simultaneous changes in environmental conditions (SST, chla, thermal stratification). Accordingly, surface orientation and moderate diving behaviour appeared to be triggered by the thermal stratification of the water column, though less pronounced than previously reported for ABFT in the North Atlantic, probably indicating adaptive vertical behaviour related to the availability of epipelagic food resources (anchovies and sardines). Deep diving behaviour was particularly frequent during months of high biological productivity (February-May), although one recovered tag showed periodic and unusual long spike dives during summer-autumn, in relation to

  14. Effects of separation of resources on behaviour, physical condition and production of laying hens in furnished cages.

    Science.gov (United States)

    Shimmura, T; Azuma, T; Eguchi, Y; Uetake, K; Tanaka, T

    2009-01-01

    1. Based on our previous studies, we designed a medium-sized furnished cage with a dust bath and nest box on both sides of the cage (MFS) and evaluated its usefulness. 2. We used 180 White Leghorn layers. At the age of 17 weeks, the birds were distributed at random into one of the 4 cage designs: conventional cages (CC; 6 cages and 5 hens per cage), small (SF; 6 cages and 5 hens per cage) and medium furnished cages (MFL; 6 cages and 10 hens per cage) with a 'localised' dust bath and nest box on one side of the cage, and MFS (6 cages and 10 hens per cage). The total allocation of resources per bird was similar for all furnished cage designs. Behaviour, physical condition and production were measured in each cage. 3. Moving was more frequent in MFS and MFL than in CC and SF. The proportion of hens performing aggressive pecking and severe feather pecking was higher in MFL than CC and SF. These aggressive interactions occurred frequently in the dust bath area in MFL; however, these tendencies were not found in MFS. Egg production and egg mass were lower in MFL than in SF, while the production in MFS was similar to those in CC and SF. MFS hens laid eggs on the cage floor more often than in MFL. 4. In conclusion, these results demonstrate the possible usefulness of MFS. However, some inconsistent results and ways of improving MFS design were also identified.

  15. Influences of the manufacturing process chain design on the near surface condition and the resulting fatigue behaviour of quenched and tempered SAE 4140

    International Nuclear Information System (INIS)

    Klein, M; Eifler, D

    2010-01-01

    To analyse interactions between single steps of process chains, variations in material properties, especially the microstructure and the resulting mechanical properties, specimens with tension screw geometry were manufactured with five process chains. The different process chains as well as their parameters influence the near surface condition and consequently the fatigue behaviour in a characteristic manner. The cyclic deformation behaviour of these specimens can be benchmarked equivalently with conventional strain measurements as well as with high-precision temperature and electrical resistance measurements. The development of temperature-values provides substantial information on cyclic load dependent changes in the microstructure.

  16. Influences of the manufacturing process chain design on the near surface condition and the resulting fatigue behaviour of quenched and tempered SAE 4140

    Energy Technology Data Exchange (ETDEWEB)

    Klein, M; Eifler, D, E-mail: klein@mv.uni-kl.d [Institute of Materials Science and Engineering, University of Kaiserslautern, D-67663 Kaiserslautern (Germany)

    2010-07-01

    To analyse interactions between single steps of process chains, variations in material properties, especially the microstructure and the resulting mechanical properties, specimens with tension screw geometry were manufactured with five process chains. The different process chains as well as their parameters influence the near surface condition and consequently the fatigue behaviour in a characteristic manner. The cyclic deformation behaviour of these specimens can be benchmarked equivalently with conventional strain measurements as well as with high-precision temperature and electrical resistance measurements. The development of temperature-values provides substantial information on cyclic load dependent changes in the microstructure.

  17. Automatically producing tailored web materials for public administration

    Science.gov (United States)

    Colineau, Nathalie; Paris, Cécile; Vander Linden, Keith

    2013-06-01

    Public administration organizations commonly produce citizen-focused, informational materials describing public programs and the conditions under which citizens or citizen groups are eligible for these programs. The organizations write these materials for generic audiences because of the excessive human resource costs that would be required to produce personalized materials for everyone. Unfortunately, generic materials tend to be longer and harder to understand than materials tailored for particular citizens. Our work explores the feasibility and effectiveness of automatically producing tailored materials. We have developed an adaptive hypermedia application system that automatically produces tailored informational materials and have evaluated it in a series of studies. The studies demonstrate that: (1) subjects prefer tailored materials over generic materials, even if the tailoring requires answering a set of demographic questions first; (2) tailored materials are more effective at supporting subjects in their task of learning about public programs; and (3) the time required to specify the demographic information on which the tailoring is based does not significantly slow down the subjects in their information seeking task.

  18. Behaviour of high purity UO2/H2O interfaces under helium beam irradiation in deaerated conditions

    International Nuclear Information System (INIS)

    Mendes, E.

    2005-11-01

    A question put within the framework of the nuclear fuel storage worn in geological site is what become to them in the presence of water. The aim of a fundamental program, of PRECCI project (ECA), is to highlight the behaviour of interfaces which can be used as models for the interfaces nuclear spent fuel/water if the fuel is uranium UO 2 dioxide. This doctorate is interested in the effect of the alpha activity which is the only one that exist in the spent fuel after long periods. The aim is to identify the mechanisms of alteration and of leaching of surfaces under alpha irradiation. A method is developed to irradiate UO 2 /H 2 O interfaces in deaerated conditions with the beam of He 2+ produced by a cyclotron. The He 2+ ions cross an UO 2 disc and emerge in water with an energy of 5 MeV. Leachings under irradiation are carried with a large range of particles flux. The post-irradiation characterization of the surface of the discs realised by micro-Raman spectroscopy allowed to identify the alteration layer. It is made up of studtite UO 2 (O 2 ),4H 2 O, and of schoepite UO 3 ,xH 2 O. The analysis of the solutions shows that the uranium release strongly increases. The electrochemical properties of the interfaces under irradiation strongly differ from those before irradiation. This work allows to propose that the radiolytic species seen by the interface are it during the heterogeneous phase of evolution of the traces and are species of short lives. Modeling show that the radiolytic radicals species can migrate toward the interface and react with the UO 2 surface. (author)

  19. An individually tailored treatment programme for improved oral hygiene: introduction of a new course of action in health education for patients with periodontitis.

    Science.gov (United States)

    Jönsson, B; Ohrn, K; Oscarson, N; Lindberg, P

    2009-08-01

    To describe and evaluate an individually tailored treatment programme based on a behavioural medicine approach to oral hygiene self-care for patients with chronic periodontitis. Two experimental single-case studies with multiple-baseline design across different self-administered oral hygiene behaviours were conducted. Cognitive Behavioural techniques were used to organize the strategies for the intervention and the approach to counselling was inspired by and structured in accordance with Motivational Interviewing. The central features in the programme were the individual analysis of knowledge and oral hygiene habits, individually set goals for oral hygiene behaviour, practice of manual dexterity for oral hygiene aids, continuous self-monitoring of the behaviour and prevention of relapse. Both participants reached the predecided criteria for clinical significance in reducing plaque and bleeding on probing. Reductions of periodontal probing depth were achieved as well. The positive results remained stable throughout the 2-year study period. The successful application of this educational model suggests that it could be used as a method for tailoring interventions targeted to oral hygiene for patients with periodontal conditions. The programme will now be tested in a larger randomized controlled trial.

  20. Neonates need tailored drug formulations.

    Science.gov (United States)

    Allegaert, Karel

    2013-02-08

    Drugs are very strong tools used to improve outcome in neonates. Despite this fact and in contrast to tailored perfusion equipment, incubators or ventilators for neonates, we still commonly use drug formulations initially developed for adults. We would like to make the point that drug formulations given to neonates need to be tailored for this age group. Besides the obvious need to search for active compounds that take the pathophysiology of the newborn into account, this includes the dosage and formulation. The dosage or concentration should facilitate the administration of low amounts and be flexible since clearance is lower in neonates with additional extensive between-individual variability. Formulations need to be tailored for dosage variability in the low ranges and also to the clinical characteristics of neonates. A specific focus of interest during neonatal drug development therefore is a need to quantify and limit excipient exposure based on the available knowledge of their safety or toxicity. Until such tailored vials and formulations become available, compounding practices for drug formulations in neonates should be evaluated to guarantee the correct dosing, product stability and safety.

  1. Fission product chemistry and aerosol behaviour in the primary circuit of a pressurised water reactor under severe accident conditions

    International Nuclear Information System (INIS)

    Bowsher, B.R.

    1985-09-01

    Three key accident sequences are considered covering a representative range of different environments of pressure, flow, temperature history and degree of zircaloy oxidation, and their principle thermal hydraulic and physical characteristics affecting chemistry behaviour are identified. Inventories, chemical forms and timing of fission product release are summarized together with the major sources of structural materials and their release characteristics. Chemistry of each main fission product species is reviewed from available experimental and/or theoretical data. Studies modelling primary circuit fission product behaviour are reviewed. Requirements for further study are assessed. (UK)

  2. Effect of rearing conditions on behavioural and physiological responses of pigs to preslaughter handling and mixing at transport

    NARCIS (Netherlands)

    Jong, de I.C.; Prelle, I.T.; Burgwal, van de J.A.; Lambooij, E.; Korte, S.M.; Blokhuis, H.J.; Koolhaas, J.M.

    2000-01-01

    The physiological and behavioural responses of slaughter pigs reared in either a barren environment or in an enriched environment (larger pens with straw bedding) to preslaughter handling and mixing at transport were studied. Enriched-reared pigs had higher salivary cortisol concentrations in the

  3. Effects of rearing conditions on behavioural and physiological responses of pigs to preslaughter handling and mixing at transport

    NARCIS (Netherlands)

    de Jong, I.C; Prelle, I.T.; Lambooij, E.; Korte, S.M.; Blokhuis, H.J; Koolhaas, J.M.

    The physiological and behavioural responses of slaughter pigs reared in either a barren environment or in an enriched environment (larger pens with straw bedding) to preslaughter handling and mixing at transport were studied. Enriched-reared pigs had higher salivary cortisol concentrations in the

  4. Influence of Municipal Abattoir Conditions and Animal-related Factors on Avoidance-related Behaviour, Bleeding Times at Slaughter and the Quality of Lamb Meat.

    Science.gov (United States)

    Njisane, Yonela Z; Muchenje, Voster

    2013-10-01

    The objective of this study was to determine the effect of municipal abattoir conditions and animal factors on avoidance-related behaviour (AB) of sheep at slaughter, bleeding times (BT) and mutton quality. The behaviour of 66 castrates and 19 ewes of different age categories was observed at three stages of slaughter. Higher behaviour scores indicated higher levels of AB. Time intervals between the start of blood flow and the time the flow changed from a constant stream into drips were recorded as BT. Thirty two meat samples were obtained to measure quality variables. These were colour (L*, a* and b*), pH24, temperature, cooking loss (CL) and tenderness. Correlations were determined between BT and meat quality variables. Animal behaviour at slaughter differed with breed, gender and age group. Avoidance behaviour was higher in the Dorper breed than in both the Merino breed and their crosses. It was also higher in younger (lambs than in older sheep. Castrates were more aggressive or in panic than ewes. Castrates had longer (72.6±0.53 s) BT than the ewes (63.6±2.82 s). Ewes had higher CL (39.8±1.04%) values than castrates (35.1±0.95%). Meat from castrates was tougher (32.6±1.95 N) than the meat from ewes (24.3±1.16 N). There were no significant correlations obtained between BT and meat quality variables. It can therefore be concluded that abattoir conditions, breed, age and gender had an effect on AB at slaughter. Gender had an effect on BT and mutton quality.

  5. Influence of Municipal Abattoir Conditions and Animal-related Factors on Avoidance-related Behaviour, Bleeding Times at Slaughter and the Quality of Lamb Meat

    Directory of Open Access Journals (Sweden)

    Yonela Z. Njisane

    2013-10-01

    Full Text Available The objective of this study was to determine the effect of municipal abattoir conditions and animal factors on avoidance-related behaviour (AB of sheep at slaughter, bleeding times (BT and mutton quality. The behaviour of 66 castrates and 19 ewes of different age categories was observed at three stages of slaughter. Higher behaviour scores indicated higher levels of AB. Time intervals between the start of blood flow and the time the flow changed from a constant stream into drips were recorded as BT. Thirty two meat samples were obtained to measure quality variables. These were colour (L*, a* and b*, pH24, temperature, cooking loss (CL and tenderness. Correlations were determined between BT and meat quality variables. Animal behaviour at slaughter differed with breed, gender and age group. Avoidance behaviour was higher in the Dorper breed than in both the Merino breed and their crosses. It was also higher in younger (<10 months lambs than in older sheep. Castrates were more aggressive or in panic than ewes. Castrates had longer (72.6±0.53 s BT than the ewes (63.6±2.82 s. Ewes had higher CL (39.8±1.04% values than castrates (35.1±0.95%. Meat from castrates was tougher (32.6±1.95 N than the meat from ewes (24.3±1.16 N. There were no significant correlations obtained between BT and meat quality variables. It can therefore be concluded that abattoir conditions, breed, age and gender had an effect on AB at slaughter. Gender had an effect on BT and mutton quality.

  6. Aggression behaviour induced by oral administration of the Janus-kinase inhibitor tofacitinib, but not oclacitinib, under stressful conditions.

    Science.gov (United States)

    Fukuyama, Tomoki; Tschernig, Thomas; Qi, Yulin; Volmer, Dietrich A; Bäumer, Wolfgang

    2015-10-05

    Janus kinase (JAK) inhibitors have recently been developed for allergic diseases. We focused on the 2 different JAK inhibitors, tofacitinib (selective for JAK3) and oclacitinib (selective for JAK1 and 2), to clarify the mechanism of anti-inflammatory and anti-itching potency of these drugs. In the process of detecting anti-itching potency, we observed that tofacitinib treated mice showed aggression behaviour. The objective of the study reported here was to investigate the aggressive behaviour induced by tofacitinib by using a mouse model of allergic dermatitis and the resident-intruder test. For the allergic dermatitis model, female BALB/c mice were sensitised and challenged topically with toluene-2,4-diisocyanate (TDI). Vehicle, tofacitinib or oclacitinib, was administered orally 30 min before TDI challenge. Scratching, aggression and standing behaviours were monitored in the 60 min period immediately following challenge of TDI. Another group of male BALB/c mice treated with vehicle, tofacitinib or oclacitinib was evaluated in the resident-intruder test and brains were obtained to determine blood brain barrier penetration. In the allergic dermatitis model, a significant increase in aggression and standing behaviour was only obvious in the tofacitinib treatment group. There was no effect in non-sensitised mice, but similar aggression was also induced by tofacitinib in male resident-intruder test. Penetration of blood-brain barrier was observed both in tofacitinib and oclacitinib treated mice. These results suggest that aggression was induced by tofacitinib under some kind of stressful environment. This study indicates a possible role of the JAK-STAT pathway in modulation of aggression behaviour. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Preliminary results of the BTF-104 experiment: an in-reactor test of fuel behaviour and fission-product release and transport under LOCA/LOECC conditions

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, L W; Elder, P H; Devaal, J W; Irish, J D; Yamazaki, A R [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

    1996-12-31

    The BTF-104 experiment is one of a series of in-reactor tests being performed to measure fuel behaviour and fission-product release from nuclear fuel subjected to accident conditions. The primary objective of the BTF-104 experiment was to measure fission-product releases from a CANDU-sized fuel element under combined Loss-of-Coolant Accident (LOCA) and Loss-of-Emergency-Core-Cooling (LOECC) conditions at an average fuel temperature of about 1550 deg C. The preliminary results of the BTF-104 experiment are presented in this paper. (author). 6 refs., 12 figs.

  8. Study of colloidal particles behaviour in the PWR primary circuit conditions; Etude du comportement des particules colloidales dans les conditions physicochimiques du circuit primaire des reacteurs a eau sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Barale, M

    2006-12-15

    EDF wants to understand, model and limit primary circuit contamination of Pressurized Water Reactors by colloidal particles resulting from corrosion. The electrostatic behaviour of representative oxide particles (cobalt ferrite, nickel ferrite and magnetite) has been studied in primary circuit conditions with the influence of boric acid and lithium hydroxide. The isoelectric point (IEP) and the point of zero charge (PZC) of particles, measured between 5 C and 320 C, exhibit a minimum towards 200 C. The thermodynamic constants of the protonation equilibrium of surface sites were calculated. When boric acid is added, zeta potential and IEP decrease because of borate ions sorption. On the contrary, there is not effect of lithium ions. The modelling of these results under conditions representative of primary circuit shows that these oxides exhibit a negative surface charge, explaining their sorption and adhesion behaviour. (author)

  9. An integrated motivational interviewing and cognitive-behavioural intervention promoting physical activity maintenance for adults with chronic health conditions: A feasibility study.

    Science.gov (United States)

    Scott, Sarah E; Breckon, Jeff D; Copeland, Robert J

    2018-01-01

    Objectives Physical activity is recommended for managing chronic health conditions but is rarely maintained. This feasibility study aimed to evaluate the preliminary efficacy of a motivational interviewing and cognitive-behavioural intervention for long-term physical activity for adults with chronic health conditions. Methods Participants ( N = 37) with stable conditions (e.g. diabetes) were randomized into a three-month motivational interviewing and cognitive-behavioural group ( N = 20) or usual care ( N = 17) after completing a physical activity referral scheme. Participants completed physical activity (e.g. average steps per day and kilocalorie expenditure), psychological (e.g. self-efficacy) and epidemiological (e.g. body mass index) standardized measures at baseline, three- and six-month follow-up. Treatment fidelity and feasibility were assessed. Results Thirty-five participants completed the study (96% retention). The motivational interviewing and cognitive-behavioural group maintained kilocalorie expenditure at three ( p = 0.009) and six months ( p = 0.009). Exercise barrier self-efficacy ( p = 0.03), physical ( p = 0.02) and psychological ( p = 0.01) physical activity experiences were increased at three months only. No difference was found for average steps/day, social support, coping skills and epidemiological factors. Discussion This is the first study to demonstrate the feasibility and preliminary efficacy of motivational interviewing and cognitive-behavioural interventions for promoting physical activity maintenance in a clinical population. A large-scale trial with a longer follow-up (≥6 months) is warranted with treatment fidelity assessment.

  10. Seasonal variations in the diet and foraging behaviour of dunlins Calidris alpina in a south European estuary: improved feeding conditions for northward migrants.

    Directory of Open Access Journals (Sweden)

    Ricardo C Martins

    Full Text Available During the annual cycle, migratory waders may face strikingly different feeding conditions as they move between breeding areas and wintering grounds. Thus, it is of crucial importance that they rapidly adjust their behaviour and diet to benefit from peaks of prey abundance, in particular during migration, when they need to accumulate energy at a fast pace. In this study, we compared foraging behaviour and diet of wintering and northward migrating dunlins in the Tagus estuary, Portugal, by video-recording foraging birds and analysing their droppings. We also estimated energy intake rates and analysed variations in prey availability, including those that were active at the sediment surface. Wintering and northward migrating dunlins showed clearly different foraging behaviour and diet. In winter, birds predominantly adopted a tactile foraging technique (probing, mainly used to search for small buried bivalves, with some visual surface pecking to collect gastropods and crop bivalve siphons. Contrastingly, in spring dunlins generally used a visual foraging strategy, mostly to consume worms, but also bivalve siphons and shrimps. From winter to spring, we found a marked increase both in the biomass of invertebrate prey in the sediment and in the surface activity of worms and siphons. The combination of these two factors, together with the availability of shrimps in spring, most likely explains the changes in the diet and foraging behaviour of dunlins. Northward migrating birds took advantage from the improved feeding conditions in spring, achieving 65% higher energy intake rates as compared with wintering birds. Building on these results and on known daily activity budgets for this species, our results suggest that Tagus estuary provides high-quality feeding conditions for birds during their stopovers, enabling high fattening rates. These findings show that this large wetland plays a key role as a stopover site for migratory waders within the East

  11. Tailoring Earned Value Management. General Guidelines

    National Research Council Canada - National Science Library

    2002-01-01

    Partial Contents: General Principles, A Spectrum of Implementation, OMB Guidance, A Special Note about DOD, Risk Factors to Consider, How can EVMS be tailored, Tailor EVMS to Inherent Risk, Application Thresholds-DoD...

  12. Experimental analysis of energy absorption behaviour of Al-tube filled with pumice lightweight concrete under axial loading condition

    Science.gov (United States)

    Rajak, D. K.; Deshpande, P. G.; Kumaraswamidhas, L. A.

    2017-08-01

    This Paper aimed at experimental investigation of compressive behaviour of square tube filled with pumice lightweight concrete (PLC). Square section of 20×20×30 mm is investigated, which is the backbone structure. The compression deformation result shows the better folding mechanism, displacement value, and energy absorption. PLC concrete filled with aluminium thin-wall tubes has been revealed superior energy absorption capacity (EAC) under low strain rate at room temperature. Superior EAC resulted as a result of mutual deformation benefit between aluminium section and PLC is also analysed. PLC was characterised by Fourier Transform Infrared (FTIR) and Field Emission Scanning Electron Microscopy (FESEM), and Energy Dispersive X-ray Spectrometry (EDX) analysis for better understanding of material behaviour. Individual and comparative load bearing graphs is logged for better prospective of analysing. Novel approach aimed at validation of porous lightweight concrete for better lightweight EA filler material.

  13. Employee Perceptions of Workplace Health Promotion Programs: Comparison of a Tailored, Semi-Tailored, and Standardized Approach.

    Science.gov (United States)

    Street, Tamara D; Lacey, Sarah J

    2018-04-28

    In the design of workplace health promotion programs (WHPPs), employee perceptions represent an integral variable which is predicted to translate into rate of user engagement (i.e., participation) and program loyalty. This study evaluated employee perceptions of three workplace health programs promoting nutritional consumption and physical activity. Programs included: (1) an individually tailored consultation with an exercise physiologist and dietitian; (2) a semi-tailored 12-week SMS health message program; and (3) a standardized group workshop delivered by an expert. Participating employees from a transport company completed program evaluation surveys rating the overall program, affect, and utility of: consultations ( n = 19); SMS program ( n = 234); and workshops ( n = 86). Overall, participants’ affect and utility evaluations were positive for all programs, with the greatest satisfaction being reported in the tailored individual consultation and standardized group workshop conditions. Furthermore, mode of delivery and the physical presence of an expert health practitioner was more influential than the degree to which the information was tailored to the individual. Thus, the synergy in ratings between individually tailored consultations and standardized group workshops indicates that low-cost delivery health programs may be as appealing to employees as tailored, and comparatively high-cost, program options.

  14. Comprehensive behavioural analysis of Long Evans and Sprague-Dawley rats reveals differential effects of housing conditions on tests relevant to neuropsychiatric disorders.

    Directory of Open Access Journals (Sweden)

    Karly M Turner

    Full Text Available Genetic (G and environmental (E manipulations are known to alter behavioural outcomes in rodents, however many animal models of neuropsychiatric disorders only use a restricted selection of strain and housing conditions. The aim of this study was to examine GxE interactions comparing two outbred rat strains, which were housed in either standard or enriched cages. The strains selected were the albino Sprague-Dawley rat, commonly used for animal models, and the other was the pigmented Long Evans rat, which is frequently used in cognitive studies. Rats were assessed using a comprehensive behavioural test battery and included well-established tests frequently employed to examine animal models of neuropsychiatric diseases, measuring aspects of anxiety, exploration, sensorimotor gating and cognition. Selective strain and housing effects were observed on a number of tests. These included increased locomotion and reduced pre-pulse inhibition in Long Evans rats compared to Sprague Dawley rats; and rats housed in enriched cages had reduced anxiety-like behaviour compared to standard housed rats. Long Evans rats required fewer sessions than Sprague Dawley rats to learn operant tasks, including a signal detection task and reversal learning. Furthermore, Long Evans rats housed in enriched cages acquired simple operant tasks faster than standard housed Long Evans rats. Cognitive phenotypes in animal models of neuropsychiatric disorders would benefit from using strain and housing conditions where there is greater potential for both enhancement and deficits in performance.

  15. Deep drawing simulation of Tailored Blanks

    NARCIS (Netherlands)

    van den Berg, Albert; Meinders, Vincent T.; Stokman, B.

    1998-01-01

    Tailored blanks are increasingly used in the automotive industry. A tailored blank consists of different metal parts, which are joined by a welding process. These metal parts usually have different material properties. Hence, the main advantage of using a tailored blank is to provide the right

  16. Convergence in anisotropic conditions: gallery behaviour in the Callovo-Oxfordian clayey layer in North-Eastern France

    International Nuclear Information System (INIS)

    Blanco Martin, L.; Hadj-Hassen, F.; Philippe, J.C.; Boidy, E.; Colombet, G.; Armand, G.

    2010-01-01

    Document available in extended abstract form only. Coyne et Bellier (Tractebel Engineering) has been supplying geotechnical services to Andra since 1994 regarding the feasibility for developing a repository for radioactive waste in a 490 m deep clayey formation at the Meuse/Haute-Marne site. Armines/Mines-ParisTech (French engineering school) has been an Andra scientific partner for several years due to its expertise in rock creep behaviour as well as in mining technologies. Throughout the different works carried out for Andra (especially the studies concerning the enlargement of the underground research laboratory), the behaviour of the Callovo-Oxfordian clayey were computed. These studies are used mainly for predicting the long-term behaviour of this layer. Lemaitre's rheological law (or modified Norton's law) has been used for such purposes. This time-dependent law is able to model the isotropic hardening of an elastic-viscoplastic solid by taking into account a non linear viscosity (γ) which Coyne et Bellier has decided to represent by means of a cone-shaped dash-pot element (stiffness increases during creep, cf. Eric Boidy's PhD). This hypothesis, together with that standing for 'long-term incompressibility' (viscoplastic deformation occurs at constant volume), allows the law be expressed by means of the second invariants of the stress (q) and strain (ε vp ) tensors. The rheological model when the long term behaviour takes place beyond a stress threshold (σ S ) is shown. Modelling works that use this law reproduce well convergence measurements as long as radial stresses around the galleries are isotropic. When the stress field around the gallery is anisotropic, the classic Lemaitre's law no longer fits the convergence measurements. This is the case for the GMR gallery at the main level of the laboratory: the horizontal stress is 1.3 times greater than the vertical stress whilst the average vertical convergence is more than five

  17. Long-term behaviour of concrete under saline conditions for long-term stable sealing structures; Langzeitverhalten von Beton unter salinaren Bedingungen fuer langzeitstabile Verschlussbauwerke

    Energy Technology Data Exchange (ETDEWEB)

    Dahlhaus, Frank; Haucke, Joerg [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau und Spezialtiefbau

    2012-03-15

    The authors of the contribution under consideration examine the long-term behaviour of concrete under saline conditions and in particular the suitability of the dam construction materials salt concrete and brine concrete for the use as a part of a sealing system of long-term stable geotechnical sealing structures. The long-term stability of the building material mainly is determined by the corrosion of the cement paste phases. The specific shrinkage behaviour of the construction material is analyzed experimentally in order to verify the expected cracks. The mechanisms of cracking in the salt concrete and brine concrete are analyzed by means of a mesomechanical approach in numerical finite-element calculations.

  18. Time series with tailored nonlinearities

    Science.gov (United States)

    Räth, C.; Laut, I.

    2015-10-01

    It is demonstrated how to generate time series with tailored nonlinearities by inducing well-defined constraints on the Fourier phases. Correlations between the phase information of adjacent phases and (static and dynamic) measures of nonlinearities are established and their origin is explained. By applying a set of simple constraints on the phases of an originally linear and uncorrelated Gaussian time series, the observed scaling behavior of the intensity distribution of empirical time series can be reproduced. The power law character of the intensity distributions being typical for, e.g., turbulence and financial data can thus be explained in terms of phase correlations.

  19. Cyclic stress-strain behaviour under thermomechanical fatigue conditions - Modeling by means of an enhanced multi-component model

    Energy Technology Data Exchange (ETDEWEB)

    Christ, H J [Institut fuer Werkstofftechnik, Universitaet Siegen, D-57068 Siegen (Germany); Bauer, V, E-mail: hans-juergen.christ@uni-siegen.d [Wieland Werke AG, Graf-Arco Str. 36, D-89072 Ulm (Germany)

    2010-07-01

    The cyclic stress-strain behaviour of metals and alloys in cyclic saturation can reasonably be described by means of simple multi-component models, such as the model based on a parallel arrangement of elastic-perfectly plastic elements, which was originally proposed by Masing already in 1923. This model concept was applied to thermomechanical fatigue loading of two metallic engineering materials which were found to be rather oppositional with respect to cyclic plastic deformation. One material is an austenitic stainless steel of type AISI304L which shows dynamic strain aging (DSA) and serves as an example for a rather ductile alloy. A dislocation arrangement was found after TMF testing deviating characteristically from the corresponding isothermal microstructures. The second material is a third-generation near-gamma TiAl alloy which is characterized by a very pronounced ductile-to-brittle transition (DBT) within the temperature range of TMF cycling. Isothermal fatigue testing at temperatures below the DBT temperature leads to cyclic hardening, while cyclic softening was found to occur above DBT. The combined effect under TMF leads to a continuously developing mean stress. The experimental observations regarding isothermal and non-isothermal stress-strain behaviour and the correlation to the underlying microstructural processes was used to further develop the TMF multi-composite model in order to accurately predict the TMF stress-strain response by taking the alloy-specific features into account.

  20. A web-based computer-tailored smoking prevention programme for primary school children: intervention design and study protocol

    Science.gov (United States)

    2012-01-01

    Background Although the number of smokers has declined in the last decade, smoking is still a major health problem among youngsters and adolescents. For this reason, there is a need for effective smoking prevention programmes targeting primary school children. A web-based computer-tailored feedback programme may be an effective intervention to stimulate youngsters not to start smoking, and increase their knowledge about the adverse effects of smoking and their attitudes and self-efficacy regarding non-smoking. Methods & design This paper describes the development and evaluation protocol of a web-based out-of-school smoking prevention programme for primary school children (age 10-13 years) entitled ‘Fun without Smokes’. It is a transformation of a postal mailed intervention to a web-based intervention. Besides this transformation the effects of prompts will be examined. This web-based intervention will be evaluated in a 2-year cluster randomised controlled trial (c-RCT) with three study arms. An intervention and intervention + prompt condition will be evaluated for effects on smoking behaviour, compared with a no information control condition. Information about pupils’ smoking status and other factors related to smoking will be obtained using a web-based questionnaire. After completing the questionnaire pupils in both intervention conditions will receive three computer-tailored feedback letters in their personal e-mail box. Attitudes, social influences and self-efficacy expectations will be the content of these personalised feedback letters. Pupils in the intervention + prompt condition will - in addition to the personalised feedback letters - receive e-mail and SMS messages prompting them to revisit the ‘Fun without Smokes’ website. The main outcome measures will be ever smoking and the utilisation of the ‘Fun without Smokes’ website. Measurements will be carried out at baseline, 12 months and 24 months of follow-up. Discussion The present study

  1. A web-based computer-tailored smoking prevention programme for primary school children: intervention design and study protocol

    Directory of Open Access Journals (Sweden)

    Cremers Henricus-Paul

    2012-06-01

    Full Text Available Abstract Background Although the number of smokers has declined in the last decade, smoking is still a major health problem among youngsters and adolescents. For this reason, there is a need for effective smoking prevention programmes targeting primary school children. A web-based computer-tailored feedback programme may be an effective intervention to stimulate youngsters not to start smoking, and increase their knowledge about the adverse effects of smoking and their attitudes and self-efficacy regarding non-smoking. Methods & design This paper describes the development and evaluation protocol of a web-based out-of-school smoking prevention programme for primary school children (age 10-13 years entitled ‘Fun without Smokes’. It is a transformation of a postal mailed intervention to a web-based intervention. Besides this transformation the effects of prompts will be examined. This web-based intervention will be evaluated in a 2-year cluster randomised controlled trial (c-RCT with three study arms. An intervention and intervention + prompt condition will be evaluated for effects on smoking behaviour, compared with a no information control condition. Information about pupils’ smoking status and other factors related to smoking will be obtained using a web-based questionnaire. After completing the questionnaire pupils in both intervention conditions will receive three computer-tailored feedback letters in their personal e-mail box. Attitudes, social influences and self-efficacy expectations will be the content of these personalised feedback letters. Pupils in the intervention + prompt condition will - in addition to the personalised feedback letters - receive e-mail and SMS messages prompting them to revisit the ‘Fun without Smokes’ website. The main outcome measures will be ever smoking and the utilisation of the ‘Fun without Smokes’ website. Measurements will be carried out at baseline, 12 months and 24 months of follow

  2. Comparing the risk associated with psychosocial work conditions and health behaviours on incident hypertension over a nine-year period in Ontario, Canada.

    Science.gov (United States)

    Smith, Peter M; Mustard, Cameron A; Lu, Hong; Glazier, Richard H

    2013-01-07

    Hypertension is an increasingly important health concern in Canada. This paper examines the risks associated with psychosocial working conditions compared to health behaviours on the risk of hypertension over a 9-year period in Ontario, Canada. We used data from Ontario respondents to the 2000-01 Canadian Community Health Survey linked to the Ontario Health Information Plan database covering physician services and the Canadian Institute for Health Information database for hospital admissions. We focused on labour market participants aged 35 to 60, who had not been previously diagnosed with hypertension, were not self-employed, and were working more than 10 hours per week, more than 20 weeks in the previous 12 months (N = 6,611). Subjects were followed for a nine-year period to ascertain incidence of hypertension. Low job control was associated with an increased risk of hypertension among men, but not among women. The population attributable fraction associated with low job control among males was 11.8% in our fully adjusted model. There was no consistent pattern of increased risk of hypertension across different levels of health behaviours. Primary prevention efforts to reduce the incidence of hypertension predominantly target modifiable health behaviours. Evidence from this longitudinal cohort suggests that modifiable characteristics of the work environment should also be considered in the design of cardiovascular disease prevention programs, in particular for male labour market participants.

  3. Tailoring PKI for the battlespace

    Science.gov (United States)

    Covey, Carlin R.

    2003-07-01

    A Public Key Infrastructure (PKI) can provide useful communication protections for friendly forces in the battlespace. The PKI would be used in conjunction with communication facilities that are accorded physical and Type-1 cryptographic protections. The latter protections would safeguard the confidentiality and (optionally) the integrity of communications between enclaves of users, whereas the PKI protections would furnish identification, authentication, authorization and privacy services for individual users. However, Commercial-Off-the-Shelf (COTS) and most Government-Off-the-Shelf (GOTS) PKI solutions are not ideally tailored for the battlespace environment. Most PKI solutions assume a relatively static, high-bandwidth communication network, whereas communication links in the battlespace will be dynamically reconfigured and bandwidth-limited. Most enterprise-wide PKI systems assume that users will enroll and disenroll at an orderly pace, whereas the battlespace PKI "enterprise" will grow and shrink abruptly as units are deployed or withdrawn from the battlespace. COTS and GOTS PKIs are seldom required to incorporate temporary "enterprise mergers", whereas the battlespace "enterprise" will need to incorporate temporary coalitions of forces drawn from various nations. This paper addresses both well-known and novel techniques for tailoring PKI for the battlespace environment. These techniques include the design of the security architecture, the selection of appropriate options within PKI standards, and some new PKI protocols that offer significant advantages in the battlespace.

  4. Cognitive behavioural therapy and mindfulness for stress and burnout: a waiting list controlled pilot study comparing treatments for parents of children with chronic conditions.

    Science.gov (United States)

    Anclair, Malin; Lappalainen, Raimo; Muotka, Joona; Hiltunen, Arto J

    2018-03-01

    Parents of children with chronic conditions often experience a crisis with serious mental health problems for themselves as a consequence. The healthcare focus is on the children; however, the parents often worry about their children's health and future but are seldom offered any counselling or guidance. The aim of this study was to investigate the effectiveness of two group-based behavioural interventions on stress and burnout among parents of children with chronic conditions. After a waiting list control period (n = 28), parents were offered either a cognitive behavioural (CBT, n = 10) or a mindfulness program (MF, n = 9). Both interventions decreased significantly stress and burnout. The within-group effect sizes were large in both interventions (CBT, g = 1.28-1.64; MF, g = 1.25-2.20). Hence, the results of this pilot study show that treating a group using either CBT or mindfulness can be an efficient intervention for reducing stress levels and burnout in parents of children with chronic conditions. © 2017 The Authors Scandinavian Journal of Caring Sciences published by John Wiley & Sons Ltd on behalf of Nordic College of Caring Science.

  5. Analysis of fuel rod behaviour within a rod bundle of a pressurized water reactor under the conditions of a loss of coolant accident (LOCA) using probabilistic methodology

    International Nuclear Information System (INIS)

    Sengpiel, W.

    1980-12-01

    The assessment of fuel rod behaviour under PWR LOCA conditions aims at the evaluation of the peak cladding temperatures and the (final) maximum circumferential cladding strains. Moreover, the estimation of the amount of possible coolant channel blockages within a rod bundle is of special interest, as large coplanar clad strains of adjacent rods may result in strong local reductions of coolant channel areas. Coolant channel blockages of large radial extent may impair the long-term coolability of the corresponding rods. A model has been developed to describe these accident consequences using probabilistic methodology. This model is applied to study the behaviour of fuel rods under accident conditions following the double-ended pipe rupture between collant pump and pressure vessel in the primary system of a 1300 MW(el)-PWR. Specifically a rod bundle is considered consisting of 236 fuel rods, that is subjected to severe thermal and mechanical loading. The results obtained indicate that plastic clad deformations with circumferential clad strains of more than 30% cannot be excluded for hot rods of the reference bundle. However, coplanar coolant channel blockages of significant extent seem to be probable within that bundle only under certain boundary conditions which are assumed to be pessimistic. (orig./RW) [de

  6. The behaviour of water-cooled reactor fuel rods in steady state and transient conditions; Zachowanie sie pretow paliwowych reaktorow chlodzonych woda w stanach ustalonych i nieustalonych

    Energy Technology Data Exchange (ETDEWEB)

    Strupczewski, A.; Marks, P. [Institute of Atomic Energy, Otwock-Swierk (Poland)

    1997-12-31

    In this report, the results of temperature field and filling gas pressure calculations by means of contemporary calculational models for a WWER-440 and WWER-1000 type fuel rod at low and high burnup operating under steady-state conditions are presented. A review of in-core temperature and pressure measurements for various types of LWR fuel is also included. Basing on calculational and collected measured data, the behaviour of fuel cladding during large and small break LOCA, is estimated with special emphasis on their oxidation and failure resistance. (author) 38 refs, 40 figs, 15 tabs

  7. Spatial and begging behaviours of juvenile Tawny Owls (Strix aluco) from fledging to independence under contrasting food conditions

    DEFF Research Database (Denmark)

    Sunde, Peter; Naundrup, Pernille

    2016-01-01

    The post-fledging dependency period (PFDP: from fledging to cessation of parental care) is a critical yet poorly studied life history transition phase during which juveniles mature and develop skills for independence. We studied the spatial and vocal behaviour of radio-tagged juvenile Tawny Owls...... during the last 5 days before juvenile independence. Hence, juvenile Tawny Owls old enough to survive on their own invested heavily in begging, with no noticeable signs of increased hunting or exploration of potential settling areas outside the natal range, until they were no longer fed by their parents...... of the parental home range. The probability of begging per 20-min nocturnal observation period increased from 21 % at fledging to 80 % at independence during years of good food supply, but remained high (>82 %) in years of poor food supply. No change was observed in nocturnal movement distances or begging rates...

  8. Mechanical behaviour of a fuel cell stack under vibrating conditions linked to aircraft applications part II: Three-dimensional modelling

    Energy Technology Data Exchange (ETDEWEB)

    Rouss, Vicky; Charon, Willy [M3M, University of Technology Belfort - Montbeliard (France); FCLAB, Rue Thierry Mieg, F 90010 Belfort, Cedex (France); Candusso, Denis [INRETS, The French National Institute for Transport and Safety Research (France); FCLAB, Rue Thierry Mieg, F 90010 Belfort, Cedex (France)

    2008-11-15

    The implementation of fuel cells (FC) in transportation systems such as airplanes requires better understanding of their mechanical behaviour in vibrating environment. To this end, a FC stack was tested on a vibrating platform for all three orthogonal axes. The experimental procedure is described in the first part of the paper. This second part of the paper demonstrates how the experimental data collected can be used to create a three-dimensional, multi-input and multi-output model based on the Artificial Neural Network (ANN) approach. Indeed FCs are nonlinear mechanical systems, difficult to be physically modelled. The ANN methodology which depends strictly on raw data is a particularly interesting alternative solution to model FCs, for example, for monitoring purpose. The ANN model is described along with the training, pruning and validation stages. The results are exposed and commented. (author)

  9. Behavioural and Cognitive Sex/Gender Differences in Autism Spectrum Condition and Typically Developing Males and Females

    Science.gov (United States)

    Hull, Laura; Mandy, William; Petrides, K. V.

    2017-01-01

    Studies assessing sex/gender differences in autism spectrum conditions often fail to include typically developing control groups. It is, therefore, unclear whether observed sex/gender differences reflect those found in the general population or are particular to autism spectrum conditions. A systematic search identified articles comparing…

  10. Tailor-welded blanks and their production

    Science.gov (United States)

    Yan, Qi

    2005-01-01

    Tailor welded blanks had been widely used in the automobile industry. A tailor welded blank consists of several flat sheets that were laser welded together before stamping. A combination of different materials, thickness, and coatings could be welded together to form a blank for stamping car body panels. As for the material for automobile industry, this technology was one of the development trend for automobile industry because of its weight reduction, safety improvement and economical use of materials. In this paper, the characters and production of tailor welded blanks in the market were discussed in detail. There had two major methods to produce tailor welded blanks. Laser welding would replace mesh seam welding for the production of tailor welded blanks in the future. The requirements on the edge preparation of unwelded blanks for tailor welded blanks were higher than the other steel processing technology. In order to produce the laser welded blank, there had the other process before the laser welding in the factory. In the world, there had three kinds of patterns for the large volume production of tailor welded blanks. In China, steel factory played the important role in the promotion of the application of tailor welded blanks. The competition for the supply of tailor welded blanks to the automobile industry would become fierce in the near future. As a result, the demand for the quality control on the production of tailor welded blanks would be the first priority concern for the factory.

  11. A tailored, dialogue-based health communication application for patients with chronic low back pain: study protocol of a randomised controlled trial.

    Science.gov (United States)

    Dirmaier, Jörg; Härter, Martin; Weymann, Nina

    2013-06-14

    Chronic low back pain is a common chronic condition whose treatment success can be improved by active involvement of patients. Patient involvement can be fostered by web-based applications combining health information with decision support or behaviour change support. These so-called Interactive Health Communication Applications (IHCAs) can reach great numbers of patients at low financial cost and provide information and support at the time, place and learning speed patients prefer. However, high attrition often seems to decrease the effects of web-based interventions. Tailoring content and tone of IHCAs to the individual patient ́s needs might improve usage and therefore effectiveness. This study aims to evaluate a tailored IHCA for people with chronic low back pain combining health information with decision support and behaviour change support. The tailored IHCA will be tested regarding effectiveness and usage against a standard website with identical content in a single-blinded randomized trial with a parallel design. The IHCA contains information on chronic low back pain and its treatment options including health behaviour change recommendations. In the intervention group the content is delivered in dialogue form, tailored to relevant patient characteristics (health literacy, coping style). In the control group there is no tailoring, a standard web-page is used for presenting the content. Participants are unaware of group assignment. Eligibility criteria are age ≥ 18 years , self- reported chronic low back pain, and Internet access. To detect the expected small effect (Cohen's d = 0.2), the sample aims to include 414 patients, with assessments at baseline, directly after the first on-page visit, and at 3-month follow-up using online self-report questionnaires. It is expected that the tailored IHCA has larger effects on knowledge and patient empowerment (primary outcomes) compared to a standard website. Secondary outcomes are website usage

  12. Working mechanisms of computer-tailored health education : evidence from smoking cessation

    NARCIS (Netherlands)

    Dijkstra, A.

    2005-01-01

    To further develop tailored interventions, their working mechanisms must be identified. In the present study, three tailored messages that each contained one potential working mechanism-personalization, adaptation or feedback-were compared with a standard information condition. Two hundred and two

  13. Simulation of experiment on aerosol behaviour at severe accident conditions in the LACE experimental facility with the ASTEC CPA code

    International Nuclear Information System (INIS)

    Kljenak, I.; Mavko, B.

    2007-01-01

    The experiment LACE LA4 on thermal-hydraulics and aerosol behavior in a nuclear power plant containment, which was performed in the LACE experimental facility, was simulated with the ASTEC CPA module of the severe accident computer code ASTEC V1.2. The specific purpose of the work was to assess the capability of the module (code) to simulate thermal-hydraulic conditions and aerosol behavior in the containment of a light-water-reactor nuclear power plant at severe accident conditions. The test was simulated with boundary conditions, described in the experiment report. Results of thermal-hydraulic conditions in the test vessel, as well as dry aerosol concentrations in the test vessel atmosphere, are compared to experimental results and analyzed. (author)

  14. Taming Parasites by Tailoring Them

    Directory of Open Access Journals (Sweden)

    Bingjian Ren

    2017-07-01

    Full Text Available The next-generation gene editing based on CRISPR (clustered regularly interspaced short palindromic repeats has been successfully implemented in a wide range of organisms including some protozoan parasites. However, application of such a versatile game-changing technology in molecular parasitology remains fairly underexplored. Here, we briefly introduce state-of-the-art in human and mouse research and usher new directions to drive the parasitology research in the years to come. In precise, we outline contemporary ways to embolden existing apicomplexan and kinetoplastid parasite models by commissioning front-line gene-tailoring methods, and illustrate how we can break the enduring gridlock of gene manipulation in non-model parasitic protists to tackle intriguing questions that remain long unresolved otherwise. We show how a judicious solicitation of the CRISPR technology can eventually balance out the two facets of pathogen-host interplay.

  15. Essential conditions for the implementation of comprehensive school health to achieve changes in school culture and improvements in health behaviours of students

    Directory of Open Access Journals (Sweden)

    Kate E. Storey

    2016-11-01

    Full Text Available Abstract Background Comprehensive School Health (CSH is an internationally recognized framework that holistically addresses school health by transforming the school culture. It has been shown to be effective in enhancing health behaviours among students while also improving educational outcomes. Despite this effectiveness, there is a need to focus on how CSH is implemented. Previous studies have attempted to uncover the conditions necessary for successful operationalization, but none have described them in relation to a proven best practice model of implementation that has demonstrated positive changes to school culture and improvements in health behaviours. Methods The purpose of this research was to identify the essential conditions of CSH implementation utilizing secondary analysis of qualitative interview data, incorporating a multitude of stakeholder perspectives. This included inductive content analysis of teacher (n = 45, principal (n = 46, and school health facilitator (n = 34 viewpoints, all of whom were employed within successful CSH project schools in Alberta, Canada between 2008 and 2013. Results Many themes were identified, here called conditions, that were divided into two categories: ‘core conditions’ (students as change agents, school-specific autonomy, demonstrated administrative leadership, dedicated champion to engage school staff, community support, evidence, professional development and ‘contextual conditions’ (time, funding and project supports, readiness and prior community connectivity. Core conditions were defined as those conditions necessary for CSH to be successfully implemented, whereas contextual conditions had a great degree of influence on the ability for the core conditions to be obtained. Together, and in consideration of already established ‘process conditions’ developed by APPLE Schools (assess, vision, prioritize; develop and implement an action plan; monitor, evaluate, celebrate

  16. The long-term behaviour of cemented research reactor waste under the geological disposal conditions of the Boom Clay Formation: results from leach experiments

    International Nuclear Information System (INIS)

    Sneyers, A.; Fays, J.; Iseghem, P. van

    2001-01-01

    The Belgian Nuclear Research Centre SCK-CEN has carried out a number of studies to evaluate the long-term behaviour of cemented research reactor waste under the geological disposal conditions of the Boom Clay Formation. Static leach experiments in synthetic clay water were performed on active samples of cemented research reactor waste. The leach experiments were carried out under anaerobic conditions at two testing temperatures (23 and 85 o C). Leach rates of seven radionuclides ( 60 Co, 90 Sr, 134 Cs, 137 Cs, 144 Ce, 154 Eu and 241 Am) were measured. Most investigated radionuclides are well retained within the cement matrix over a 280 days testing period. Results on the source term of radionuclides were complemented with data on the leaching behaviour of cement matrix constituents as Ca, Si, Al, Na, K, Mg and SO 4 as well as with data from performance assessment calculations and in situ tests. Despite limitations inherent to short-term experiments, combined results from these investigations indicate only limited interactions of disposed research reactor waste with the near field of a geological repository in clay. (author)

  17. Modelling the chemical behaviour of tellurium species in the reactor pressure vessel and the reactor cooling system under severe accident conditions

    International Nuclear Information System (INIS)

    Alonso, A.; Gonzalez, C.

    1991-07-01

    This state of the art report contains information on the behaviour of tellurium and its compounds in the reactor pressure vessel and the reactor coolant system under light water reactor severe accident conditions. To characterise tellurium behaviour, it is necessary the previous knowledge of the species of tellurium released from the core, and simultaneity of its release with that of other materials which can alter the transport, for instance, control rod and structural materials. Release and transport experiments have been reviewed along with the models implemented in the codes which are used in the international community: TRAPMELT, RAFT, VICTORIA and SOPHIE. From the experiments, it can be concluded that other species different to Te 2 , such as tin telluride and cesium telluride, may be released from the fuel. That is why they must be considered in the transport phenomena. There is also experimental evidence of the strong interaction of Te 2 with Inconel 600 and stainless steel of the pipe walls and structures, however this strong interaction is in competition with the interaction of tellurium with aerosols, which under severe accident conditions may represent an area greater than that of the primary system. It is for the absence of significant tellurium species in the transport models, and also for the interaction of tellurium with aerosols, for which some codes show the greatest deficiencies

  18. The behaviour of transport from the fission products caesium and strontium in coated particles for high temperature reactors under irradiation conditions

    International Nuclear Information System (INIS)

    Zoller, P.

    1976-07-01

    At first survey is given about existing knowledge of the behaviour of caesium and strontium fission product transport in coated particles. In order to describe the complicated fission product transport mechanisms under irradiation conditions a suitable calculating model (SLIPPER) is taken over and modified to the special problems of an irradiation experiment. Fundamentally, the fission product transport is represented by the two contributions of diffusion and recoil, at which the diffusion is described by effective diffusion coefficients. In difference of that the possibility of a two-phase-diffusion is examined for the Cs diffusion in the fuel kernel. The model application on measuring results from irradiation experiments of KFA-Juelich and Mol-Belgien allowed the explanation from the characteristic of fission product transport in coated particles under irradiation conditions and produced effective diffusion coefficients for the fission products Cs and Sr. (orig.) [de

  19. A preliminary study of the composition of commercial oil, acrylic and vinyl paints and their behaviour after accelerated ageing conditions

    Directory of Open Access Journals (Sweden)

    Francesca Caterina Izzo

    2014-12-01

    Full Text Available This study is part of a research project dealing with the establishment of monitoring and damage prevention plans for contemporary artworks. For this purpose, some commercial paints, among the most currently used by young artists, were selected: Winton oil paint (Winsor & Newton, UK, Heavy Body acrylic paint (Liquitex, USA and Flashe vinyl paint (Lefranc & Bourgeois, France. The paints were subjected to different treatments of accelerated ageing, the results indicating different behaviour in relation both to the type of binders and pigments present in the different formulations. In particular, it was observed that ageing produced by ozone plays an important role in the stability of the oil paints, above all in those containing organic azo pigments. Thermal ageing, as expected, influences the stability of all the commercial paints examined, with the formation of alteration products and visible changes in the paint films. Ageing produced by moisture clearly affects the synthetic polymer-based paints, particularly evident in the changes in mass. In all cases, the accelerated ageing treatments produced chromatic variations, more evidently for the oil paints containing organic pigment.

  20. Numerical and Experimental Investigation on the Structural Behaviour of a Horizontal Stabilizer under Critical Aerodynamic Loading Conditions

    Directory of Open Access Journals (Sweden)

    R. Sepe

    2017-01-01

    Full Text Available The aim of the proposed research activity is to investigate the mechanical behaviour of a part of aerospace horizontal stabilizer, made of composite materials and undergoing static loads. The prototype design and manufacturing phases have been carried out in the framework of this research activity. The structural components of such stabilizer are made of composite sandwich panels (HTA 5131/RTM 6 with honeycomb core (HRH-10-1/8-4.0; the sandwich skins have been made by means of Resin Transfer Moulding (RTM process. In order to assess the mechanical strength of this stabilizer, experimental tests have been performed. In particular, the most critical inflight recorded aerodynamic load has been experimentally reproduced and applied on the stabilizer. A numerical model, based on the Finite Element Method (FEM and aimed at reducing the experimental effort, has been preliminarily developed to calibrate amplitude, direction, and distribution of an equivalent and simpler load vector to be used in the experimental test. The FEM analysis, performed by using NASTRAN code, has allowed modelling the skins of the composite sandwich plates by definition of material properties and stack orientation of each lamina, while the honeycomb core has been modelled by using an equivalent orthotropic plate. Numerical and experimental results have been compared and a good agreement has been achieved.

  1. Long Term Behaviour Evaluation of Cement Conditioning Matrices Used for Management of Radioactive Wastes at IFIN-HH

    International Nuclear Information System (INIS)

    Dragolici, F.

    2013-01-01

    The mechanical and structural characterization of the radioactive waste conditioning matrix is very important during the final disposal stage in the radioactive waste management cycle. The conditioning products should be a monolith with acceptable mechanical, chemical and physical properties that are maintained over an appropriate time such that the release of radioactivity from the waste form in the environment is minimized. The aim of this work is the XRD application for the phase identification of matrix that simulates the conditioned radioactive waste and the correlation with mechanical performance. The selected matrices for the study are normal cement with iron precipitates (hydroxide and phosphate), mineral additives (bentonite and volcanic tuff) and complexing agents (tartaric, citric and oxalic acids). The results obtained by this analysis give information about the chemical reactions between the radioactive precipitates and the hydrates, hydrolysis products of the cement. (author)

  2. The mechanical and physical behaviour on the cemented waste forms after one year disposal of real conditions

    International Nuclear Information System (INIS)

    Bucataru-Nicu, M.; Mihai, F.; Rotarescu, Gh.; Turcanu, C.N.; Lungu, L.

    1999-01-01

    To prove the durability of cemented waste forms, an experimental program started in 1997 to establish the alteration in time of mechanical and physic-chemical properties of different simulated and real matrices in laboratory and Baita-Bihor disposal conditions. The selected matrices for characterization are normal cement and concrete compositions with and without mineral additives (bentonite and volcanic tuff) as reference samples, the conditioned matrices prepared with radioactive sludge non-active components (iron hydroxides and phosphate, calcium phosphate and cooper ferrocyanide) and non-active matrices prepared with organic acids and salts (oxalic, citric, tartaric, EDTA). All samples will be positioned in five locations of Baita-Bihor repository and kept 1, 3, 5 and 10 years before mechanical and structural characterization. These locations have different humidity conditions decreasing from location 1 to 5. These results will be compared with results obtained for the same type of samples kept in laboratory conditions. The research program requires detailed identification of the complex phenomena involved, long investigation times and extending basic data determined from laboratory tests in simplified conditions. The basic information on the waste matrix are obtained by mechanical strength tests. In this program, up to now, samples were prepared and disposed as follows: 1)cement-water with cement/water ratio 2:1 and 2)cement-sand-water with a cement/sand/water ratio 1:2:0.5. For the mechanical tests the sizes of the samples were: 40 x 40 x 160 mm (tested at bending and compression) and 20 x 20 x 20 mm (tested at compression). After the preparation, the samples were kept 24 hours in pattern, then in tight plastic bag for 7, 14 and 28 days for reinforcement. The bending and compression tests were done in a construction materials laboratory, using an electric press machine. After 28 days the samples of reference were introduced in the National Repository. Some of

  3. Release of fission products and post-pile creep behaviour of irradiated fuel rods stored under dry conditions

    International Nuclear Information System (INIS)

    Kaspar, G.; Peehs, M.; Bokelmann, R.; Jorde, D.; Schoenfeld, H.; Haas, W.; Bleier, A.; Rutsch, F.

    1985-06-01

    The release of moisture and fission products (Kr-85, H-3 and I-129) under dry storage conditions has been examined on six fuel rods which have become defective in the reactor. During the examinations, inert conditions prevailed and limited air inlet was allowed temporarily. The storage temperature was 400 0 C. The residual moisture content of the fuel rods was approx. 5 g. At the beginning of the test, the total moisture content and 0,05% (max.) of the fission gas inventory were released. Under inert conditions, fission gas was not released during a prolonged period of time. Under oxidizing conditions, however, fission gas was released in the course of UO 2 oxidation. Post-pile creep of Zircaloy cladding tubes was measured at temperatures between 350 and 395 0 C and interval gauge pressures between 69 and 110 bar. The creep curves indicate that the irradiated cladding tube specimens still bear internal residual stresses which contribute through their relaxation to the post-pile creep. (orig.) [de

  4. Associations of Caregiver Stress with Working Conditions, Caregiving Practices, and Child Behaviour in Home-Based Child Care

    Science.gov (United States)

    Rusby, Julie C.; Jones, Laura Backen; Crowley, Ryann; Smolkowski, Keith

    2013-01-01

    Home-based child caregivers face unique stressors related to the nature of their work. One hundred and fifty-five home-based child care providers in Oregon, USA, participated in this cross-sectional correlational study. We investigated associations between indicators of caregiver stress and child care working conditions, the quality of caregiver…

  5. E-Rehabilitation - an Internet and mobile phone based tailored intervention to enhance self-management of cardiovascular disease: study protocol for a randomized controlled trial.

    Science.gov (United States)

    Antypas, Konstantinos; Wangberg, Silje C

    2012-07-09

    Cardiac rehabilitation is very important for the recovery and the secondary prevention of cardiovascular disease, and one of its main strategies is to increase the level of physical activity. Internet and mobile phone based interventions have been successfully used to help people to achieve this. One of the components that are related to the efficacy of these interventions is tailoring of content to the individual. This trial is studying the effect of a longitudinally tailored Internet and mobile phone based intervention that is based on models of health behaviour, on the level of physical activity and the adherence to the intervention, as an extension of a face-to-face cardiac rehabilitation stay. A parallel group, cluster randomized controlled trial. The study population is adult participants of a cardiac rehabilitation programme in Norway with home Internet access and mobile phone, who in monthly clusters are randomized to the control or the intervention condition. Participants have access to a website with information regarding cardiac rehabilitation, an online discussion forum and an online activity calendar. Those randomized to the intervention condition, receive in addition tailored content based on models of health behaviour, through the website and mobile text messages. The objective is to assess the effect of the intervention on maintenance of self-management behaviours after the rehabilitation stay. Main outcome is the level of physical activity one month, three months and one year after the end of the cardiac rehabilitation programme. The randomization of clusters is based on a true random number online service, and participants, investigators and outcome assessor are blinded to the condition of the clusters. The study suggests a theory-based intervention that combines models of health behaviour in an innovative way, in order to tailor the delivered content. The users have been actively involved in its design, and because of the use of Open

  6. E-Rehabilitation – an Internet and mobile phone based tailored intervention to enhance self-management of Cardiovascular Disease: study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Antypas Konstantinos

    2012-07-01

    Full Text Available Abstract Background Cardiac rehabilitation is very important for the recovery and the secondary prevention of cardiovascular disease, and one of its main strategies is to increase the level of physical activity. Internet and mobile phone based interventions have been successfully used to help people to achieve this. One of the components that are related to the efficacy of these interventions is tailoring of content to the individual. This trial is studying the effect of a longitudinally tailored Internet and mobile phone based intervention that is based on models of health behaviour, on the level of physical activity and the adherence to the intervention, as an extension of a face-to-face cardiac rehabilitation stay. Methods/Design A parallel group, cluster randomized controlled trial. The study population is adult participants of a cardiac rehabilitation programme in Norway with home Internet access and mobile phone, who in monthly clusters are randomized to the control or the intervention condition. Participants have access to a website with information regarding cardiac rehabilitation, an online discussion forum and an online activity calendar. Those randomized to the intervention condition, receive in addition tailored content based on models of health behaviour, through the website and mobile text messages. The objective is to assess the effect of the intervention on maintenance of self-management behaviours after the rehabilitation stay. Main outcome is the level of physical activity one month, three months and one year after the end of the cardiac rehabilitation programme. The randomization of clusters is based on a true random number online service, and participants, investigators and outcome assessor are blinded to the condition of the clusters. Discussion The study suggests a theory-based intervention that combines models of health behaviour in an innovative way, in order to tailor the delivered content. The users have been actively

  7. Comparing motivational, self-regulatory and habitual processes in a computer-tailored physical activity intervention in hospital employees - protocol for the PATHS randomised controlled trial.

    Science.gov (United States)

    Kwasnicka, Dominika; Vandelanotte, Corneel; Rebar, Amanda; Gardner, Benjamin; Short, Camille; Duncan, Mitch; Crook, Dawn; Hagger, Martin S

    2017-05-26

    Most people do not engage in sufficient physical activity to confer health benefits and to reduce risk of chronic disease. Healthcare professionals frequently provide guidance on physical activity, but often do not meet guideline levels of physical activity themselves. The main objective of this study is to develop and test the efficacy of a tailored intervention to increase healthcare professionals' physical activity participation and quality of life, and to reduce work-related stress and absenteeism. This is the first study to compare the additive effects of three forms of a tailored intervention using different techniques from behavioural theory, which differ according to their focus on motivational, self-regulatory and/or habitual processes. Healthcare professionals (N = 192) will be recruited from four hospitals in Perth, Western Australia, via email lists, leaflets, and posters to participate in the four group randomised controlled trial. Participants will be randomised to one of four conditions: (1) education only (non-tailored information only), (2) education plus intervention components to enhance motivation, (3) education plus components to enhance motivation and self-regulation, and (4) education plus components to enhance motivation, self-regulation and habit formation. All intervention groups will receive a computer-tailored intervention administered via a web-based platform and will receive supporting text-messages containing tailored information, prompts and feedback relevant to each condition. All outcomes will be assessed at baseline, and at 3-month follow-up. The primary outcome assessed in this study is physical activity measured using activity monitors. Secondary outcomes include: quality of life, stress, anxiety, sleep, and absenteeism. Website engagement, retention, preferences and intervention fidelity will also be evaluated as well as potential mediators and moderators of intervention effect. This is the first study to examine a tailored

  8. Comparing motivational, self-regulatory and habitual processes in a computer-tailored physical activity intervention in hospital employees - protocol for the PATHS randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Dominika Kwasnicka

    2017-05-01

    Full Text Available Abstract Background Most people do not engage in sufficient physical activity to confer health benefits and to reduce risk of chronic disease. Healthcare professionals frequently provide guidance on physical activity, but often do not meet guideline levels of physical activity themselves. The main objective of this study is to develop and test the efficacy of a tailored intervention to increase healthcare professionals’ physical activity participation and quality of life, and to reduce work-related stress and absenteeism. This is the first study to compare the additive effects of three forms of a tailored intervention using different techniques from behavioural theory, which differ according to their focus on motivational, self-regulatory and/or habitual processes. Methods/Design Healthcare professionals (N = 192 will be recruited from four hospitals in Perth, Western Australia, via email lists, leaflets, and posters to participate in the four group randomised controlled trial. Participants will be randomised to one of four conditions: (1 education only (non-tailored information only, (2 education plus intervention components to enhance motivation, (3 education plus components to enhance motivation and self-regulation, and (4 education plus components to enhance motivation, self-regulation and habit formation. All intervention groups will receive a computer-tailored intervention administered via a web-based platform and will receive supporting text-messages containing tailored information, prompts and feedback relevant to each condition. All outcomes will be assessed at baseline, and at 3-month follow-up. The primary outcome assessed in this study is physical activity measured using activity monitors. Secondary outcomes include: quality of life, stress, anxiety, sleep, and absenteeism. Website engagement, retention, preferences and intervention fidelity will also be evaluated as well as potential mediators and moderators of intervention

  9. A quantitative sensitivity analysis on the behaviour of common thermal indices under hot and windy conditions in Doha, Qatar

    Science.gov (United States)

    Fröhlich, Dominik; Matzarakis, Andreas

    2016-04-01

    Human thermal perception is best described through thermal indices. The most popular thermal indices applied in human bioclimatology are the perceived temperature (PT), the Universal Thermal Climate Index (UTCI), and the physiologically equivalent temperature (PET). They are analysed focusing on their sensitivity to single meteorological input parameters under the hot and windy meteorological conditions observed in Doha, Qatar. It can be noted, that the results for the three indices are distributed quite differently. Furthermore, they respond quite differently to modifications in the input conditions. All of them show particular limitations and shortcomings that have to be considered and discussed. While the results for PT are unevenly distributed, UTCI shows limitations concerning the input data accepted. PET seems to respond insufficiently to changes in vapour pressure. The indices should therefore be improved to be valid for several kinds of climates.

  10. [Forming of the visual cognitive structures in the monkey conditioned-reflex behaviour: the dependence on the sensory information].

    Science.gov (United States)

    Dudkin, K N; Chueva, I V

    2008-01-01

    In monkeys, changes in size and shape of figures led to a significant decrease of correct solutions in training and a considerable increase of refusals from solution of tasks as well as the time of their motor response. The invariance of differentiation in this case was achieved after additional training. The data obtained show that, based on the stimulus sensory processing in conditioned-reflex training, in the long-term memory some differentiating signs are formed: the cognitive structures (the functional neurophysiological mechanisms) maintaining the classification of visual images. With these structures, temporary conditioned connection will be established. Their formation will be determined by the type of sensory information and provided for by existence in the long-term memory of separate subsystems for spatial as well as non-spatial information.

  11. Effect of low doses of cannabidiolic acid and ondansetron on LiCl-induced conditioned gaping (a model of nausea-induced behaviour) in rats.

    Science.gov (United States)

    Rock, E M; Parker, L A

    2013-06-01

    To determine the minimally effective dose of cannabidiolic acid (CBDA) that effectively reduces lithium chloride (LiCl)-induced conditioned gaping reactions (nausea-induced behaviour) in rats and to determine if these low systemic doses of CBDA (5-0.1 μg·kg⁻¹) relative to those of CBD could potentiate the anti-nausea effects of the classic 5-hydroxytryptamine 3 (5-HT₃) receptor antagonist, ondansetron (OND). We investigated the efficacy of low doses of CBDA to suppress acute nausea, assessed by the establishment of conditioned gaping to a LiCl-paired flavour in rats. The potential of threshold and subthreshold doses of CBDA to enhance the reduction of nausea-induced conditioned gaping by OND were then determined. CBDA (at doses as low as 0.5 μg·kg⁻¹) suppressed nausea-induced conditioned gaping to a flavour. A low dose of OND (1.0 μg·kg⁻¹) alone reduced nausea-induced conditioned gaping, but when it was combined with a subthreshold dose of CBDA (0.1 μg·kg⁻¹) there was an enhancement in the suppression of LiCl-induced conditioned gaping. CBDA potently reduced conditioned gaping in rats, even at low doses and enhanced the anti-nausea effect of a low dose of OND. These findings suggest that combining low doses of CBDA and OND will more effectively treat acute nausea in chemotherapy patients. © 2013 The Authors. British Journal of Pharmacology © 2013 The British Pharmacological Society.

  12. Thermal behaviour of pressure tube under fully and partially voided heating conditions using 19 pin fuel element simulator

    International Nuclear Information System (INIS)

    Yadav, Ashwini K.; Kumar, Ravi; Gupta, Akhilesh; Chatterjee, B.; Mukhopadhya, D.; Lele, H.G.

    2011-01-01

    In a nuclear reactor temperature can rise drastically during LOCA due to failure of heat transportation system and subsequently leads to mechanical deformations like sagging, ballooning and breaching of pressure tube. To understand the phenomenon an experiment has been carried out using 19 pin fuel element simulator. Main purpose of the experiment was to trace temperature profiles over the pressure tube, calandria tube and clad tubes of 220 MWe Indian Pressurised Heavy Water Reactor (IPHWR). The symmetrical heating of pressure tube of 1 m length was done through resistance heating of 19 pins under 13.5 kW power using a rectifier and the variation of temperatures over the circumference of pressure tube (PT), calandria tube (CT) and clad tubes were measured. The sagging of pressure tube was initiated at 460 deg C temperature and highest temperature attained was 650 deg C. The highest temperature attained by clad tubes was 680 deg C (over outer ring) and heat is dissipated to calandria vessel mainly due to radiation and natural convection. Again to simulate partially voided conditions, asymmetrical heating of pressure was carried out by injecting 8 kW power to upper 8 pins of fuel simulator. A maximum temperature difference of 295 deg C was observed over the circumference of pressure tube which highlights the magnitude of thermal stresses and its role in breaching of pressure tube under partially voided conditions. Integrity of pressure tube was retained during both symmetrical and asymmetrical heatup conditions. (author)

  13. Tailoring magnetism by light-ion irradiation

    International Nuclear Information System (INIS)

    Fassbender, J; Ravelosona, D; Samson, Y

    2004-01-01

    Owing to their reduced dimensions, the magnetic properties of ultrathin magnetic films and multilayers, e.g. magnetic anisotropies and exchange coupling, often depend strongly on the surface and interface structure. In addition, chemical composition, crystallinity, grain sizes and their distribution govern the magnetic behaviour. All these structural properties can be modified by light-ion irradiation in an energy range of 5-150 keV due to the energy loss of the ions in the solid along their trajectory. Consequently the magnetic properties can be tailored by ion irradiation. Similar effects can also be observed using Ga + ion irradiation, which is the common ion source in focused ion beam lithography. Examples of ion-induced modifications of magnetic anisotropies and exchange coupling are presented. This review is limited to radiation-induced structural changes giving rise to a modification of magnetic parameters. Ion implantation is discussed only in special cases. Due to the local nature of the interaction, magnetic patterning without affecting the surface topography becomes feasible, which may be of interest in applications. The main patterning technique is homogeneous ion irradiation through masks. Focused ion beam and ion projection lithography are usually only relevant for larger ion masses. The creation of magnetic feature sizes below 50 nm is shown. In contrast to topographic nanostructures the surrounding area of these nanostructures can be left ferromagnetic, leading to new phenomena at their mutual interface. Most of the material systems discussed here are important for technological applications. The main areas are magnetic data storage applications, such as hard magnetic media with a large perpendicular magnetic anisotropy or patterned media with an improved signal to noise ratio and magnetic sensor elements. It will be shown that light-ion irradiation has many advantages in the design of new material properties and in the fabrication technology of

  14. Self-management support and training for patients with chronic and complex conditions improves health-related behaviour and health outcomes.

    Science.gov (United States)

    Harvey, Peter W; Petkov, John N; Misan, Gary; Fuller, Jeffrey; Battersby, Malcolm W; Cayetano, Teofilo N; Warren, Kate; Holmes, Paul

    2008-05-01

    The Sharing Health Care SA chronic disease self-management (CDSM) project in rural South Australia was designed to assist patients with chronic and complex conditions (diabetes, cardiovascular disease and arthritis) to learn how to participate more effectively in the management of their condition and to improve their self-management skills. Participants with chronic and complex conditions were recruited into the Sharing Health Care SA program and offered a range of education and support options (including a 6-week peer-led chronic disease self-management program) as part of the Enhanced Primary Care care planning process. Patient self-reported data were collected at baseline and subsequent 6-month intervals using the Partners in Health (PIH) scale to assess self-management skill and ability for 175 patients across four data collection points. Health providers also scored patient knowledge and self-management skills using the same scale over the same intervals. Patients also completed a modified Stanford 2000 Health Survey for the same time intervals to assess service utilisation and health-related lifestyle factors. Results show that both mean patient self-reported PIH scores and mean health provider PIH scores for patients improved significantly over time, indicating that patients demonstrated improved understanding of their condition and improved their ability to manage and deal with their symptoms. These results suggest that involvement in peer-led self-management education programs has a positive effect on patient self-management skill, confidence and health-related behaviour.

  15. On the theoretical–numerical study of the ITER Upper Port Plug structure hydraulic behaviour under steady state and draining and drying transient conditions

    International Nuclear Information System (INIS)

    Di Maio, P.A.; Paradiso, D.; Dell’Orco, G.; Pitcher, C.S.; Kalish, M.

    2011-01-01

    Highlights: ► UPP TS hydraulic behaviour has been investigated under steady state and D and D transient conditions. ► A thermal–hydraulic system code has been adopted and a UPP TS model has been set-up and validated against results of steady state CFD analyses. ► The TS steady state hydraulic characteristic functions have been derived for two coolant flow paths showing that right plate inlet one is the most promising. ► Draining simulations indicate that the 4 MPa injection pressure is high enough to drain almost completely the circuit in a reasonable time (∼6 s). ► Results indicate that right plate inlet flow path allows the TS complete draining, eliminating the need for the drying procedure. - Abstract: The ITER diagnostic Upper Port Plug (UPP) is a water-cooled stainless steel structure aimed to integrate within vacuum vessel the plasma diagnostic systems, shielding them from neutron and photon irradiation. Due to the very intense heat loads expected, a proper cooling circuit has been designed to ensure an adequate UPP cooling with an acceptable thermal rise and an unduly high pumping power and to perform its draining and drying procedure by injection of pressurized nitrogen. A theoretical research activity has been launched at the Department of Nuclear Engineering of the University of Palermo aiming to investigate the hydraulic behaviour of the UPP Trapezoid Section cooling circuit under steady state conditions and during its draining and drying transient procedure. The research activity has been performed following a theoretical–computational approach and adopting the RELAP5 thermal–hydraulic system code. The Trapezoid Section cooling circuit characteristic functions have been derived under steady state conditions at various coolant temperatures for both the coolant flow paths at the present under consideration for this circuit. The distributions of coolant mass flow rates along the channels of the cooling circuit have been calculated too

  16. Molecular tailoring of solid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evenson, Simon Alan

    1997-07-01

    The overall performance of a material can be dramatically improved by tailoring its surface at the molecular level. The aim of this project was to develop a universal technique for attaching dendrimers (well-defined, nanoscale, functional polymers) and Jeffamines (high molecular weight polymer chains) to the surface of any shaped solid substrate. This desire for controlled functionalization is ultimately driven by the need to improve material compatibility in various biomedical applications. Atomic force microscopy (AFM) was used initially to study the packing and structure of Langmuir-Blodgett films on surfaces, and subsequently resulted in the first visualization of individual, spherically shaped, nanoscopic polyamidoamine dendrimers. The next goal was to develop a methodology for attaching such macromolecules to inert surfaces. Thin copolymer films were deposited onto solid substrates to produce materials with a fixed concentration of surface anhydride groups. Vapor-phase functionalization reactions were then carried out with trifluorinated amines to confirm the viability of this technique to bond molecules to surfaces. Finally, pulsed plasma polymerization of maleic anhydride took this approach one stage further, by forming well-adhered polymer films containing a predetermined concentration of reactive anhydride groups. Subsequent functionalization reactions led to the secure attachment of dendrimers and Jeffamines at any desired packing density. An alternative route to biocompatibilization used 1,2-ethanedithiol to yield thiolated surfaces containing very high polymeric sulfur : carbon ratios. (author)

  17. Molecular tailoring of solid surfaces

    International Nuclear Information System (INIS)

    Evenson, Simon Alan

    1997-01-01

    The overall performance of a material can be dramatically improved by tailoring its surface at the molecular level. The aim of this project was to develop a universal technique for attaching dendrimers (well-defined, nanoscale, functional polymers) and Jeffamines (high molecular weight polymer chains) to the surface of any shaped solid substrate. This desire for controlled functionalization is ultimately driven by the need to improve material compatibility in various biomedical applications. Atomic force microscopy (AFM) was used initially to study the packing and structure of Langmuir-Blodgett films on surfaces, and subsequently resulted in the first visualization of individual, spherically shaped, nanoscopic polyamidoamine dendrimers. The next goal was to develop a methodology for attaching such macromolecules to inert surfaces. Thin copolymer films were deposited onto solid substrates to produce materials with a fixed concentration of surface anhydride groups. Vapor-phase functionalization reactions were then carried out with trifluorinated amines to confirm the viability of this technique to bond molecules to surfaces. Finally, pulsed plasma polymerization of maleic anhydride took this approach one stage further, by forming well-adhered polymer films containing a predetermined concentration of reactive anhydride groups. Subsequent functionalization reactions led to the secure attachment of dendrimers and Jeffamines at any desired packing density. An alternative route to biocompatibilization used 1,2-ethanedithiol to yield thiolated surfaces containing very high polymeric sulfur : carbon ratios. (author)

  18. Formability of stainless steel tailored blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Gong, Hui; Olsen, Flemming Ove

    2004-01-01

    In a number of systematic tests, the formability of tailored blanks consisting of even and different combinations of AISI304 and AISI316 in thickness of 0.8 mm and 1.5 mm have been investigated. In order to analyse the formability of tailored blanks with different sheet thickness, a method based ...

  19. Long term behaviour of low and intermediate level waste packages under repository conditions. Results of a co-ordinated research project 1997-2002

    International Nuclear Information System (INIS)

    2004-06-01

    The development and application of approaches and technologies that provide long term safety is an essential issue in the disposal of radioactive waste. For low and intermediate level radioactive waste, engineered barriers play an important role in the overall safety and performance of near surface repositories. Thus, developing a strong technical basis for understanding the behaviour and performance of engineered barriers is an important consideration in the development and establishment of near surface repositories for radioactive waste. In 1993, a Co-ordinated Research Project (CRP) on Performance of Engineered Barrier Materials in Near Surface Disposal Facilities for Radioactive Waste was initiated by the IAEA with the twin goals of addressing some of the gaps in the database on radionuclide isolation and long term performance of a wide variety of materials and components that constitute the engineered barriers system (IAEA-TECDOC-1255 (2001)). However, during the course of the CRP, it was realized that that the scope of the CRP did not include studies of the behaviour of waste packages over time. Given that a waste package represents an important component of the overall near surface disposal system and the fact that many Member States have active R and D programmes related to waste package testing and evaluation, a new CRP was launched, in 1997, on Long Term Behaviour of Low and Intermediate Level Waste Packages Under Repository Conditions. The CRP was intended to promote research activities on the subject area in Member States, share information on the topic among the participating countries, and contribute to advancing technologies for near surface disposal of radioactive waste. Thus, this CRP complements the afore mentioned CRP on studies of engineered barriers. With the active participation and valuable contributions from twenty scientists and engineers from Argentina, Canada, Czech Republic, Egypt, Finland, India, Republic of Korea, Norway, Romania

  20. Fuel behaviour and fission product release under realistic hydrogen conditions comparisons between HEVA 06 test results and Vulcain computations

    International Nuclear Information System (INIS)

    Dumas, J.M.; Lhiaubet, G.

    1989-07-01

    The HEVA 06 test was designed to simulate the conditions existing at the time when fission products are released from irradiated fuel under hydrogen conditions occurring in a PWR core at low pressure. The test conditions were defined from results provided by the core degradation module of the ESCADRE system (1): VULCAIN. This computer code has been recently used to analyse the early core degradation of a 900 MWe PWR in the AF accident sequence (as defined in WASH - 1400, USNRC - 1975). In this scenario, the core would begin to uncover about one day after scram with the system pressure at about 0.4 MPa. The fission product release starts 70 minutes after core dewatering. The F.P. are transferred to the core outlet in an increasingly hydrogen-rich steam atmosphere. The carrier gas is nearly pure hydrogen in the time period 100 - 130 minutes after core uncovering. A large release of F.P. is predicted in the upper part of the core when the steam starvation occurs. At that time, two thirds of the cladding have been oxidised on an average. Before each HEVA test a fuel sample with a burn-up of 36 GWd/tU is reirradiated in order to observe the release of short-lived fission products. A pre-oxidation was primarely conducted in the HEVA 06 test at a temperature of 1300 0 C and controlled to reach a 2/3 cladding oxidation state. Then the steam was progressively replaced by hydrogen and a heat-up rate of 1.5 0 C/s was induced to reach a temperature of 2100 0 C. The fuel was maintained at this temperature for half an hour in hydrogen. The volatile F.P. release kinetics were observed by on-line gamma spectrometry. Pre test calculations of F.P. release kinetics performed with the EMIS module based on the CORSOR models (3) are compared with the test results. Measured releases of cesium and iodine are really lower than those predicted. Axial and radial F.P. distributions in the fuel pellets are available from gamma tomography measurements performed after the test. Tellurium seems

  1. Conditioned instrumental behaviour in the rat: Effects of prenatal irradiation with various low dose-rate doses

    International Nuclear Information System (INIS)

    Klug, H.

    1986-01-01

    4 groups of rats of the Wistar-strain were subjected to γ-irradiation on the 16th day of gestation. 5 rats received 0,6 Gy low dose rate irradiation, 5 animals received 0,9 Gy low dose and 6 high dose irradiation, 3 females were shamirradiated. The male offspring of these 3 irradiation groups and 1 control group were tested for locomotor coordination on parallel bars and in a water maze. The female offspring were used in an operant conditioning test. The locomotor test showed slight impairment of locomotor coordination in those animals irradiated with 0,9 Gy high dose rate. Swimming ability was significantly impaired by irradiation with 0,9 Gy high dose rate. Performance in the operant conditioning task was improved by irradiation with 0,9 Gy both low and high dose rate. The 0,9 Gy high dose rate group learned faster than all the other groups. For the dose of 0,9 Gy a significant dose rate effect could be observed. For the dose of 0,6 Gy a similar tendency was observed, differences between 0,6 Gy high and low dose rate and controls not being significant. (orig./MG) [de

  2. Perceived helpfulness of the individual components of a behavioural weight loss program: results from the Hopkins POWER Trial

    OpenAIRE

    Dalcin, A. T.; Jerome, G. J.; Fitzpatrick, S. L.; Louis, T. A.; Wang, N?Y.; Bennett, W. L.; Durkin, N.; Clark, J. M.; Daumit, G. L.; Appel, L. J.; Coughlin, J. W.

    2015-01-01

    Summary Background Behavioural weight loss programs are effective first?line treatments for obesity and are recommended by the US Preventive Services Task Force. Gaining an understanding of intervention components that are found helpful by different demographic groups can improve tailoring of weight loss programs. This paper examined the perceived helpfulness of different weight loss program components. Methods Participants (n?=?236) from the active intervention conditions of the Practice?bas...

  3. Effect of a Sulphate Transient on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Test 1)

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, S.; Seifert, H. P

    2002-03-01

    Within the CASTOC-project (5th EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. Within WP 3 of this project, the Paul Scherrer Institut (PSI) investigates the effect of water chemistry transients on the EAC crack growth behaviour under periodical partial unloading (PPU) conditions. The present report is a summary of the first PSI test of WP 3 with a Na{sub 2}SO{sub 4} transient. In the first part of the report, the theoretical background on crack growth mechanisms, crack chemistry, mass transport and water chemistry transients as well as a brief literature survey on other water chemistry transient investigations is given. Furthermore, the experimental equipment and test procedure is presented, followed by a summary of the results of PSI test 1 of WP 3. Finally the results are discussed in detail and compared to literature data. In the first part of the experiment, an actively growing EAC crack was generated by PPU in oxygenated high-temperature, high-purity water (T = 288 {sup o}C, DO = 8 ppm, SO{sub 4}{sup 2-} < 0.6 ppb). Then a sulphate transient was applied. The duration ({approx} 300 h) and the amount of sulphate (SO{sub 4}{sup 2-} = 368 ppb) of the applied sulphate transient conservatively covered all sulphate transients, which might occur in BWR/normal water chemistry (NWC) practice. After the transient, outlet conductivity was lowered from ca. 1 {mu}S/cm to less than 0.15 {mu}S/cm within 2.6 h by a 'two-loop technique'. No accelerating effect of the sulphate transient on the EAC crack growth of both tested fracture mechanics specimens under highly oxidising BWR/NWC conditions was observed, making it impossible to deterrnine incubation or delay times. The EAC crack growth rates (CGR) before, during and after the

  4. Efficacy of technology-delivered cognitive behavioural therapy for OCD versus control conditions, and in comparison with therapist-administered CBT: meta-analysis of randomized controlled trials.

    Science.gov (United States)

    Dèttore, Davide; Pozza, Andrea; Andersson, Gerhard

    2015-01-01

    Cognitive behavioural therapy (CBT) is a well-established treatment for obsessive-compulsive disorder (OCD). However, few patients receive CBT, due to factors such as geographic limitations, perceived stigmatization, and lack of CBT services. Technology-delivered cognitive behavioural therapy (T-CBT) could be an effective strategy to improve patients' access to CBT. To date, a meta-analysis on the effectiveness of T-CBT for OCD has not been conducted. This study used meta-analytic techniques to summarize evidence on the efficacy of T-CBT for OCD versus control conditions and therapist-administered CBT. A meta-analysis according to Prisma guidelines was conducted on randomized controlled trials (RCTs) of T-CBT for OCD. Treatment was classified as T-CBT if evidence-based CBT active ingredients for OCD were included (psychoeducation, ERP, and cognitive restructuring), delivered through health technologies (e.g. self-help books, leaflets, and other forms of bibliotherapy) or remote communication technologies (e.g. the Internet, web-cameras, telephones, telephone-interactive voice response systems, and CD-ROMS). Studies using validated outcomes for OCD or depression were included. Eight trials were included (N = 420). Two trials were classified as at high risk of bias. T-CBT seemed to be superior to control conditions on OCD symptom outcomes at post-treatment (d = 0.82, 99% CI = 0.55-1.08, p = 0.001), but not on comorbid depression (d = 0.33, 99% CI = - 0.01-0.67, p = 0.020). Difference in the efficacy on OCD symptoms between T-CBT and therapist-administered CBT was not significant, despite a trend favouring therapist-administered CBT emerged (d = 0.45, 95% CI = 0.03-0.87, p = 0.033). Directions for research are discussed. Further RCTs are warranted to examine the efficacy of T-CBT for OCD.

  5. Effects of transient global ischaemia on freezing behaviour and activity in a context-dependent fear conditioning task--implications for memory investigations.

    Science.gov (United States)

    Henrich-Noack, Petra; Krautwald, Karla; Reymann, Klaus G; Wetzel, Wolfram

    2011-07-15

    Transient global ischaemia induces cell death in the CA1 layer of the hippocampus. To evaluate the functional consequences, we performed context-dependent fear conditioning. Ischaemia was induced by 2-vessel-occlusion (2VO) in gerbils. On day 6 post ischaemia or sham procedures (in control group) gerbils were placed in a test chamber and after 3 min adaption time exposed to foot-shocks (training session). On the next day the animals were placed in the same test chamber without foot-shocks (test session). As a parameter for memory performance we used the standard method of measuring the total freezing time via a cumulative time-sampling procedure during the test session. We found a significant longer total freezing time in control animals than in ischaemic animals. In addition, however, we applied a more detailed analysis of (i) quantifying the number of freezing bouts, (ii) the average duration of single freezing bouts, (iii) the activity pattern during the training and test situation and (iv) we differentially evaluated all the single time segments of the experiment. These analyses revealed that although maintenance of freezing (duration of freezing bout) was significantly lower in ischaemic animals compared to controls, the initiation of freezing (number of freezing bouts) was not significantly different between the two groups during the test session. The activity scores of ischaemic and non-ischaemic gerbils were similar during the adaption time of the training session. The foot-shock, however, induced a significantly different pattern of behaviour in the ischaemic animals, which was selectively reproduced during the test session. In conclusion, ischaemic gerbils reacted to a fearsome thread with a behavioural pattern different from unlesioned animals and they revealed this specific foot-shock induced behaviour again during the test session. This indicated that CA1 hippocampal death did not interrupt memory performance but changed expression of fear. Therefore

  6. Analysis of optical properties behaviour of CLEARCERAM, fused silica and CaF2 glasses exposed to simulated space conditions

    Science.gov (United States)

    Fernández-Rodríguez, M.; Alvarado, C. G.; Núñez, A.; Álvarez-Herrero, A.

    2017-11-01

    Optical instrumentation on-board satellites suffer degradation due to the hostile conditions of space environment. Space conditions produce instrumentation performances changes causing a decrease or a cancellation of their features. Particularly, space environment conditions have a significant influence on the optical properties of glasses which are part of space optical systems. Space environment characteristics which effects on the optical system have to be taken into account are: outgassing, volatile components, gas or water vapor which form part of the spacecraft materials, vacuum, microgravity, micrometeorites, space debris, thermal, mechanical and radiation environment and effects of the high atmosphere [1]. This work is focused on analyzing temperature variations and ultraviolet (UV) and gamma radiation effects on the optical properties of several glasses used on space applications. Thermal environment is composed of radiation from the Sun, the albedo and the Earth radiation and the radiation from the spacecraft to deep space. Flux and influence of temperature on satellite materials depend on factors as the period of year or the position of them on the space system. Taking into account that the transfer mechanisms of heat are limited by the conduction and the radiation, high gradients of temperature are obtained in system elements which can cause changes of their optical properties, birefringence… Also, these thermal cycles can introduce mechanical loads into material structure due to the expansion and the contraction of the material leading to mechanical performances degradation [2]. However, it is the radiation environment the main cause of damage on optical properties of materials used on space instrumentation. This environment consists of a wide range of energetic particles between keV and MeV which are trapped by the geomagnetic field or are flux of particles that cross the Earth environment from the external of the Solar System [3]. The damage

  7. Friction and wear behaviour of hypereutectic Al-Si alloy/steel tribopair under dry and lubricated conditions

    Directory of Open Access Journals (Sweden)

    Parveen Kumar

    2017-12-01

    Full Text Available Dry and lubricated sliding tribological tests on hypereutectic Al-25Si alloy was performed using a ball- on- disk configuration at room temperature. Hypereutectic Al-25Si alloy were prepared by rapid solidification process under T6 condition. Friction coefficient (COF and wear rate of the alloy were measured under different applied loads ranging from 5–100 N. It is found that the friction coefficient varies with load, first declines (from 5-50 N, then increases (from 50-80 N and then again decreases (80-100 N. The wear rate of the samples of hypereutectic Al-25Si alloy, first increases and then decreases with increasing the applied normal load. Hypereutectic Al-25Si alloy presents higher wear rate at 50 N due to the participation of a large amount of needle-like precipitates, but shows low wear rate under high load of 100 N because of the work hardening layer. Worn surface morphologies were analyzed using optical and scanning electron microscope (SEM coupled with an energy dispersive spectrometer (EDS. The improvements in COF and wear rate were mainly attributed to morphology, size and distribution of Si particles due to its fabrication process. The dominant wear mechanism for hypereutectic Al-25Si alloy was adhesive wear, abrasive wear and plastic deformation.

  8. Exploring participatory behaviour of disability benefit claimants from an insurance physician's perspective.

    Science.gov (United States)

    Sjobbema, Christiaan; van der Mei, Sijrike; Cornelius, Bert; van der Klink, Jac; Brouwer, Sandra

    2018-08-01

    In the Dutch social security system, insurance physicians (IPs) assess participatory behaviour as part of the overall disability claim assessment. This study aims to explore the views and opinions of IPs regarding participatory behaviour as well as factors related to inadequate participatory behaviour, and to incorporate these factors in the International Classification of Functioning, Disability and Health (ICF) biopsychosocial framework. This qualitative study collected data by means of open-ended questions in 10 meetings of local peer review groups (PRGs) which included a total of 78 IPs of the Dutch Social Security Institute. In addition, a concluding discussion meeting with 8 IPs was organized. After qualitative data analyses, four major themes emerged: (1) participation as an outcome, (2) efforts of disability benefit claimants in the process of participatory behaviour, (3) beliefs of disability benefit claimants concerning participation, and (4) recovery behaviour. Identified factors of inadequate participatory behaviour covered all ICF domains, including activities, environmental, and personal factors, next to factors related to health condition and body functions or structures. Outcomes of the discussion meeting indicated the impossibility of formulating general applicable criteria for quantifying and qualifying participatory behaviour. Views of IPs on disability benefit claimants' (in)adequate participatory behaviour reflect a broad biopsychosocial perspective. IPs adopt a nuanced tailor-made approach during assessment of individual disability benefit claimants' participatory behaviour and related expected activities aimed at recovery of health and RTW. Implications for Rehabilitation Within a biopsychosocial perspective, it is not possible to formulate general criteria for the assessment of participatory behaviour for each unique case. Individual disability benefit claimant characteristics and circumstances are taken into account. To optimize the return

  9. 'I wouldn't push that further because I don't want to lose her': a multiperspective qualitative study of behaviour change for long-term conditions in primary care.

    Science.gov (United States)

    Hunter, Cheryl; Chew-Graham, Carolyn A; Langer, Susanne; Drinkwater, Jessica; Stenhoff, Alexandra; Guthrie, Elspeth A; Salmon, Peter

    2015-12-01

    Health outcomes for long-term conditions (LTCs) can be improved by lifestyle, dietary and condition management-related behaviour change. Primary care is an important setting for behaviour change work. Practitioners have identified barriers to this work, but there is little evidence examining practices of behaviour change in primary care consultations and how patients and practitioners perceive these practices. To examine how behaviour change is engaged with in primary care consultations for LTCs and investigate how behaviour change is perceived by patients and practitioners. Multiperspective, longitudinal qualitative research involving six primary health-care practices in England. Consultations between patients with LTCs and health-care practitioners were audio-recorded. Semi-structured interviews were completed with patients and practitioners, using stimulated recall. Patients were re-interviewed 3 months later. Framework analysis was applied to all data. Thirty-two people with at least one LTC (chronic obstructive pulmonary disease, diabetes, asthma and coronary heart disease) and 10 practitioners. Behaviour change talk in consultations was rare and, when it occurred, was characterized by deflection and diffidence on the part of practitioners. Patient motivation tended to be unaddressed. While practitioners positioned behaviour change work as outside their remit, patients felt uncertain about, yet responsible for, this work. Practitioners raised concerns that this work could damage other aspects of care, particularly the patient-practitioner relationship. Behaviour change work is often deflected or deferred by practitioners in consultations, who nevertheless vocalize support for its importance in interviews. This discrepancy between practitioners' accounts and behaviours needs to be addressed within primary health-care organizations. © 2014 The Authors Health Expectations Published by John Wiley & Sons Ltd.

  10. Individually tailored internet-based cognitive behavior therapy for adolescents with anxiety disorders: A pilot effectiveness study

    OpenAIRE

    Kristin Silfvernagel; Malin Gren-Landell; Marie Emanuelsson; Per Carlbring; Gerhard Andersson

    2015-01-01

    This is the first study of adolescents suffering from anxiety disorder in Sweden to receive individually tailored internet-based treatment within a child and adolescent psychiatric clinic. The primary aim of this effectiveness study was to examine the effects of tailored internet-based cognitive behaviour therapy for adolescents. 11 adolescents, aged 15-19 years, were allocated to treatment after assessment. Screening consisted of online questionnaires followed by a diagnostic face-to-face...

  11. 10-year effect of Oportunidades, Mexico's conditional cash transfer programme, on child growth, cognition, language, and behaviour: a longitudinal follow-up study.

    Science.gov (United States)

    Fernald, Lia C H; Gertler, Paul J; Neufeld, Lynnette M

    2009-12-12

    Mexico's conditional cash transfer programme, Oportunidades, was started to improve the lives of poor families through interventions in health, nutrition, and education. We investigated the effect of Oportunidades on children almost 10 years after the programme began. From April, 1998, to October, 1999, low-income communities were randomly assigned to be enrolled in Oportunidades immediately (early treatment, n=320) or 18 months later (late treatment, n=186). In 2007, when 1093 children receiving early treatment and 700 late treatment in these communities were aged 8-10 years, they were assessed for outcomes including physical growth, cognitive and language development, and socioemotional development. The primary objective was to investigate outcomes associated with an additional 18 months in the programme. We used cluster-adjusted t tests and multivariate regressions to compare effects of programme participation for height-for-age, body-mass index (BMI), and cognitive language and behavioural assessment scores in early versus late treatment groups. Early enrolment reduced behavioural problems for all children in the early versus late treatment group (mean behaviour problem score -0.09 [SD 0.97] vs 0.13 [1.03]; p=0.0024), but we identified no difference between groups for mean height-for-age Z scores (-1.12 [0.96] vs -1.14 [0.97]; p=0.88), BMI-for-age Z scores (0.14 [0.99] vs 0.17 [1.06]; p=0.58), or assessment scores for language (98.8 [13.8] vs 98.4 [14.6] p=0.90) or cognition (98.8 [12.9] vs 100.2 [13.2]; p=0.26). An additional 18 months of the programme before age 3 years for children aged 8-10 years whose mothers had no education resulted in improved child growth of about 1.5 cm assessed as height-for-age [corrected] Z score (beta 0.23 [0.023-0.44] p=0.029), independently of cash received. An additional 18 months in the Oportunidades programme has independent beneficial effects other than money, especially for women with no formal education. The money itself

  12. Effects of shelter type, early environmental enrichment and weather conditions on free-range behaviour of slow-growing broiler chickens.

    Science.gov (United States)

    Stadig, L M; Rodenburg, T B; Ampe, B; Reubens, B; Tuyttens, F A M

    2017-06-01

    Free-range use by broiler chickens is often limited, whereas better use of the free-range area could benefit animal welfare. Use of free-range areas could be stimulated by more appropriate shelter or environmental enrichment (by decreasing birds' fearfulness). This study aimed to assess the effects of shelter type, early environmental enrichment and weather conditions on free-range use. Three production rounds with 440 slow-growing broiler chickens (Sasso T451) were carried out. Birds were housed indoors in four groups (two with males, two with females) from days 0 to 25, during which two of the groups received environmental enrichment. At day 23 birds' fearfulness was assessed with a tonic immobility (TI) test (n=100). At day 25 all birds were moved (in mixed-sex groups) to mobile houses, and provided with free-range access from day 28 onwards. Each group could access a range consisting for 50% of grassland with 21 artificial shelters (ASs, wooden A-frames) and for 50% of short rotation coppice (SRC) with willow (dense vegetation). Free-range use was recorded by live observations at 0900, 1300 and 1700 h for 15 to 21 days between days 28 and 63. For each bird observed outside the shelter type (AS or SRC), distance from the house (0 to 2, 2 to 5, >5 m) and its behaviour (only rounds 2 and 3) were recorded. Weather conditions were recorded by four weather stations. On average, 27.1% of the birds were observed outside at any given moment of observation. Early environmental enrichment did not decrease fearfulness as measured by the TI test. It only had a minor effect on the percentage of birds outside (0.4% more birds outside). At all distances from the house, SRC was preferred over AS. In AS, areas closer to the house were preferred over farther ones, in SRC this was less pronounced. Free-range use increased with age and temperature and decreased with wind speed. In AS, rainfall and decreasing solar radiation were related to finding more birds outside, whereas the

  13. Prevalence of dental caries in 5-year-old Greek children and the use of dental services: evaluation of socioeconomic, behavioural factors and living conditions.

    Science.gov (United States)

    Mantonanaki, Magdalini; Koletsi-Kounari, Haroula; Mamai-Homata, Eleni; Papaioannou, William

    2013-04-01

    To assess dental caries and use of dental services experience in 5-year-old children attending public kindergartens in Attica, Greece and to examine the influence of certain socioeconomic factors and living conditions as well as dental behaviours and attitudes. In this cross-sectional study, a random and stratified sample of 605 Greek children was examined using decayed, missing, filled tooth surfaces and simplified debris indices. The use of dental services was measured by children's dental visits (any dental visit up to the age of 5 years). Care Index was also calculated. Risk indicators were assessed by a questionnaire. Zero-inflated Poisson and Logistic Regression Analysis were generated to test statistical significant associations. The prevalence of dental caries was 16.5%. Care Index was 32% and dental visits were reported for the 84% of the children. Medium Socio-Economic Level (SEL) was associated with no detectable caries. High SEL was related to decreased decayed, missing, filled teeth values, while female gender and rented houses had the opposite effect. The age of the mother (35-39 years) and the higher SEL were related to higher levels of dental services use. It is suggested that there are differences in the experience of dental caries and use of dental services among preschool children in Attica, which are related to demographic, socioeconomic factors and living conditions. Dental public polices should focus on groups with specific characteristics in order to improve oral health levels of disease-susceptible populations. © 2013 FDI World Dental Federation.

  14. Gamma-hydroxybutyric acid endogenous production and post-mortem behaviour - the importance of different biological matrices, cut-off reference values, sample collection and storage conditions.

    Science.gov (United States)

    Castro, André L; Dias, Mário; Reis, Flávio; Teixeira, Helena M

    2014-10-01

    Gamma-Hydroxybutyric Acid (GHB) is an endogenous compound with a story of clinical use, since the 1960's. However, due to its secondary effects, it has become a controlled substance, entering the illicit market for recreational and "dance club scene" use, muscle enhancement purposes and drug-facilitated sexual assaults. Its endogenous context can bring some difficulties when interpreting, in a forensic context, the analytical values achieved in biological samples. This manuscript reviewed several crucial aspects related to GHB forensic toxicology evaluation, such as its post-mortem behaviour in biological samples; endogenous production values, whether in in vivo and in post-mortem samples; sampling and storage conditions (including stability tests); and cut-off reference values evaluation for different biological samples, such as whole blood, plasma, serum, urine, saliva, bile, vitreous humour and hair. This revision highlights the need of specific sampling care, storage conditions, and cut-off reference values interpretation in different biological samples, essential for proper practical application in forensic toxicology. Copyright © 2014 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  15. The influence of ppb levels of chloride impurities on the stress corrosion crack growth behaviour of low-alloy steels under simulated boiling water reactor conditions

    International Nuclear Information System (INIS)

    Seifert, H.P.; Ritter, S.

    2016-01-01

    Highlights: • Chloride effects on SCC crack growth in RPV steels under boiling water reactor conditions. • ppb-levels of chloride may result in fast SCC in normal water chemistry environment. • Much higher chloride tolerance for SCC in hydrogen water chemistry environment. • Potential long-term (memory) effects after severe and prolonged temporary chloride transients. - Abstract: The effect of chloride on the stress corrosion crack (SCC) growth behaviour in low-alloy reactor pressure vessel steels was evaluated under simulated boiling water reactor conditions. In normal water chemistry environment, ppb-levels of chloride may result in fast SCC after rather short incubation periods of few hours. After moderate and short-term chloride transients, the SCC crack growth rates return to the same very low high-purity water values within few 100 h. Potential long-term (memory) effects on SCC crack growth cannot be excluded after severe and prolonged chloride transients. The chloride tolerance for SCC in hydrogen water chemistry environment is much higher.

  16. Significance of heat-moisture treatment conditions on the pasting and gelling behaviour of various starch-rich cereal and pseudocereal flours.

    Science.gov (United States)

    Collar, Concha

    2017-10-01

    The impact of heat-moisture treatment processing conditions (15%, 25%, and 35% moisture content; 1, 3, and 5 h heating time at 120 ℃) on the viscosity pasting and gelling profiles of different grain flours matrices (barley, buckwheat, sorghum, high β-glucan barley, and wheat) was investigated by applying successive cooking and cooling cycles to rapid visco analyser canisters with highly hydrated samples (3.5:25, w:w). At a milder heat-moisture treatment conditions (15% moisture content, 1 h heating time), except for sorghum, heat-moisture treatment flours reached much higher viscosity values during earlier pasting and subsequent gelling than the corresponding native counterparts. Besides heat-moisture treatment wheat flour, the described behaviour found also for non-wheat-treated flours has not been previously reported in the literature. An increased hydrophobicity of prolamins and glutelins in low moisture-short heating time heat-moisture treatment of non-wheat flours with high protein content (12.92%-19.95%) could explain the enhanced viscosity profile observed.

  17. Effects of environmental enrichment on growth, aggressive behaviour and brain monoamines of gilthead seabream Sparus aurata reared under different social conditions.

    Science.gov (United States)

    Batzina, Alkisti; Dalla, Christina; Papadopoulou-Daifoti, Zeta; Karakatsouli, Nafsika

    2014-03-01

    The presence of blue or red-brown substrate on the tank bottom has been previously reported as an efficient means of environmental enrichment for gilthead seabream. The present study aimed to investigate whether this enrichment is still beneficial when gilthead seabream is reared under different social conditions (i.e. a lower 4.9 kg m(-3) and a higher 9.7 kg m(-3) density). Water exchange was adjusted according to fish biomass to exclude density effects on water quality. In the enriched tanks single-colour glass gravel was used as substrate (blue and red-brown substrate, or BS and RBS respectively), while control tanks had no gravel. Growth, aggressive behaviour and size distribution results indicated that the lower density created a less favourable social environment. In both densities studied, BS enhanced growth, suppressed aggression and reduced brain serotonergic activity. In the condition of intense social interactions (i.e. the lower density) BS also reduced brain dopaminergic activity. These results along with the negative correlations observed between brain monoamines and fish body mass, indicated that substrate and density effects are socially-induced. However, there may be several biotic and/or abiotic factors interfering with substrate effects that should be investigated before the practical use of a substrate in land-based intensive aquaculture. Copyright © 2013 Elsevier Inc. All rights reserved.

  18. Thermo-fluid behaviour of periodic cellular metals

    CERN Document Server

    Lu, Tian Jian; Wen, Ting

    2013-01-01

    Thermo-Fluid Behaviour of Periodic Cellular Metals introduces the study of coupled thermo-fluid behaviour of cellular metals with periodic structure in response to thermal loads, which is an interdisciplinary research area that requires a concurrent-engineering approach.  The book, for the first time, systematically adopts experimental, numerical, and analytical approaches, presents the fluid flow and heat transfer in periodic cellular metals under forced convection conditions, aiming to establish structure-property relationships for tailoring material structures to achieve properties and performance levels that are customized for defined multifunctional applications. The book, as a textbook and reference book, is intended for both academic and industrial people, including graduate students, researchers and engineers. Dr. Tian Jian Lu is a professor at the School of Aerospace, Xi’an Jiaotong University, Xi’an, China. Dr. Feng Xu is a professor at the Key Laboratory of Biomedical Information Engineering o...

  19. Continuous tailoring activities in software engineering

    OpenAIRE

    Ribaud , Vincent; Saliou , Philippe

    2004-01-01

    International audience; Software activities belong to different processes. Tailoring software processes aims to relate the operational software processes of an organization to the effective project. With the information technology industry moving ever faster, established positions are undergoing constant evolutionary change. The failure of a complex tailoring process of a management information system is reported. There is a need to adopt software processes that can operate under constant cha...

  20. Tailoring of mobility advices to consumers. Executive summary; Tailoring van mobiliteitsadviezen aan consumenten. Managementsamenvatting

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, I.; Jonkers, R. [ResCon, Haarlem (Netherlands)

    2003-09-01

    An outline is given of the options to apply so-called computer tailoring in the field of mobility. A feasibility study has been carried out for the realization of a computerized tailored mobility programme. Tailoring is a method, based on social-scientific theories on behavioral change, by means of which information is tailored to individual circumstances, preferences and motivation. [Dutch] De mogelijkheden van computer tailoring (tailoring is een methodiek die gebaseerd is op sociaal-wetenschappelijke theorieen over gedragsverandering, waarbij de aangeboden informatie is afgestemd op individuele omstandigheden, preferenties en motivaties) op het gebied van mobiliteit worden verkend. Er is een haalbaarheidsonderzoek uitgevoerd ter voorbereiding op de realisatie van een computer tailored mobiliteitsprogramma. In dit onderzoek is nagegaan: of consumenten belangstelling hebben voor informatie op maat over mobiliteit; waar consumenten zelf de meeste mogelijkheden zien om hun mobiliteitspatroon te veranderen (en dus meer duurzame mobiliteitsopties toe te passen); hoe het gedrag van consumenten m.b.t. mobiliteit d.m.v. een tailoring systeem gericht beinvloed kan worden; of er organisaties te vinden zijn die de exploitatie van een tailoring systeem m.b.t. mobiliteit op zich zouden willen nemen; of de ontwikkeling van een dergelijk systeem kosten effectief kan zijn.

  1. Tailoring of mobility advices to consumers. A determinants survey; Tailoring van mobiliteitsadviezen aan consumenten. Een determinantenonderzoek

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, I.; Jonkers, R. [ResCon, Haarlem (Netherlands)

    2003-08-01

    An outline is given of the options to apply so-called computer tailoring in the field of mobility. A feasibility study has been carried out for the realization of a computerized tailored mobility programme. Tailoring is a method, based on social-scientific theories on behavioral change, by means of which information is tailored to individual circumstances, preferences and motivation. [Dutch] De mogelijkheden van computer tailoring (tailoring is een methodiek die gebaseerd is op sociaal-wetenschappelijke theorieen over gedragsverandering, waarbij de aangeboden informatie is afgestemd op individuele omstandigheden, preferenties en motivaties) op het gebied van mobiliteit worden verkend. Er is een haalbaarheidsonderzoek uitgevoerd ter voorbereiding op de realisatie van een computer tailored mobiliteitsprogramma. In dit onderzoek is nagegaan: of consumenten belangstelling hebben voor informatie op maat over mobiliteit; waar consumenten zelf de meeste mogelijkheden zien om hun mobiliteitspatroon te veranderen (en dus meer duurzame mobiliteitsopties toe te passen); hoe het gedrag van consumenten m.b.t. mobiliteit d.m.v. een tailoring systeem gericht beinvloed kan worden; of er organisaties te vinden zijn die de exploitatie van een tailoring systeem m.b.t. mobiliteit op zich zouden willen nemen; of de ontwikkeling van een dergelijk systeem kosten effectief kan zijn.

  2. @selfhealthtech: Using self-administered health monitoring technologies to support the self-management of long-term conditions: what about behaviour change?

    Directory of Open Access Journals (Sweden)

    Heather May Morgan

    2015-10-01

    Conclusions This evidence synthesis adds to emerging research concerning digital technologies, contributing to the literature where there is a knowledge gap around SSM and self-administered health monitoring technologies. It highlights a need to better understand the delivery and quality of care when technologies are used for SSM. It would be beneficial to re-characterise or reconceptualise these technologies and their implementation. More rigorous description of interventions, e.g. using the TIDIER template for intervention description and replication checklist10, or linking systems with BCT taxonomy v.19 through the smartphone app11, as well as a requirement to attend to behaviour change theory and techniques in the design, use and description is also required. Future research should address these concerns to inform developments in SSM for chronic conditions involving technologies, as well as in policy and practices more generally where digital technologies are implicated. In addition, the results of this review suggest that detailed primary research should be undertaken to explore the personal, social and ethical considerations of users in everyday life.

  3. Visibility conditions and diel period affect small-scale spatio-temporal behaviour of pike Esox lucius in the absence of prey and conspecifics

    DEFF Research Database (Denmark)

    Nilsson, P A; Baktoft, Henrik; Boel, Mikkel

    2012-01-01

    Pike Esox lucius in the absence of prey and conspecifics were shown to have the highest habitat-change activity during dusk and to decrease preference for complex habitats in turbid water. As the behaviours indicate routine responses in the absence of behavioural interactions, E. lucius spatio...

  4. Corrosion behaviour of selected high-level waste packaging materials under gamma irradiation and in-situ disposal conditions in rock salt

    International Nuclear Information System (INIS)

    Smailos, E.; Schwarzkopf, W.; Koester, R.

    1988-07-01

    Corrosion studies performed until now on a number of materials have shown that unalloyed steels, Hastelloy C4 and Ti 99.8-Pd are the most promising materials for a long-term resistant packaging to be used in high-level waste (HLW) canister disposal in rock salt formations. To characterize their corrosion behaviour in more detail, additional studies have been performed. The influence has been examined which is exerted by the gamma dose rate (1 Gy/h to 100 Gy/h) on the corrosion of three preselected steels and Hastelloy C4 at 90 0 C in a salt brine (Q-brine) rich in MgCl 2 , i.e., conditions relevant to accident scenarios in a repository. In addition, in-situ corrosion experiments have been carried out in the Asse salt mine at elevated temperatures (120 0 C to 210 0 C) in the absence and in the presence of a gamma radiation field of 3 x 10 2 Gy/h, within the framework of the German/US Brine Migration Test. Under the test conditions the gamma radiation did not exert a significant influence on the corrosion of the steels investigated, whereas Hastelloy C4, exposed to dose rates of 10 Gy/h and 100 Gy/h, underwent pitting and crevice corrosion (20 μm/a at the maximum).The low amounts of migrated salt brine (140 ml after 900 days) in the in-situ- experiment did not produce noticeable corrosion of the materials. (orig./RB) [de

  5. Tailored nutrition education: is it really effective?

    Science.gov (United States)

    Eyles, Helen; Ni Mhurchu, Cliona

    2012-03-01

    There has been a growing interest in tailored nutrition education over the previous decade, with a number of literature reviews suggesting this intervention strategy holds considerable potential. Nevertheless, the majority of intervention trials undertaken to date have employed subjective self-report outcome measures (such as dietary recalls). The aim of the present review is to further consider the likely true effect of tailored nutrition education by assessing the findings of tailored nutrition education intervention trials where objective outcome measures (such as sales data) have been employed. Four trials of tailored nutrition education employing objective outcome measures were identified: one was undertaken in eight low-cost supermarkets in New Zealand (2010; n 1104); one was an online intervention trial in Australia (2006; n 497); and two were undertaken in US supermarkets (1997 and 2001; n 105 and 296, respectively). Findings from the high-quality New Zealand trial were negative. Findings from the US trials were also generally negative, although reporting was poor making it difficult to assess quality. Findings from the high-quality online trial were positive, although have limited generalisability for public health. Trials employing objective outcome measures strongly suggest tailored nutrition education is not effective as a stand-alone strategy. However, further large, high-quality trials employing objective outcome measures are needed to determine the true effectiveness of this popular nutrition intervention strategy. Regardless, education plays an important role in generating social understanding and acceptance of broader interventions to improve nutrition.

  6. Nanoparticles and their tailoring with laser light

    International Nuclear Information System (INIS)

    Hubenthal, Frank

    2009-01-01

    Monodisperse noble metal nanoparticles are of tremendous interest for numerous applications, such as surface-enhanced Raman spectroscopy, catalysis or biosensing. However, preparation of monodisperse metal nanoparticles is still a challenging task, because typical preparation methods yield nanoparticle ensembles with broad shape and/or size distributions. To overcome this drawback, tailoring of metal nanoparticles with laser light has been developed, which is based on the pronounced shape- and size-dependent optical properties of metal nanoparticles. I will demonstrate that nanoparticle tailoring with ns-pulsed laser light is a suitable method to prepare nanoparticle ensembles with a narrow shape and/or size distribution. While irradiation with ns-pulsed laser light during nanoparticle growth permits a precise shape tailoring, post-grown irradiation allows a size tailoring. For example, the initial broad Gaussian size distribution of silver nanoparticles on quartz substrates with a standard deviation of σ= 30% is significantly reduced to as little as σ= 10% after tailoring. This paper addresses teachers of undergraduate and advanced school level as well as students. It assumes some fundamental knowledge in solid-state physics, thermodynamics and resonance vibration.

  7. The Economy of Persistence: Mario the Tailor

    Directory of Open Access Journals (Sweden)

    Prudence Black

    2016-03-01

    Full Text Available Mario Conte has had a tailor shop in King Street, Newtown since the mid 1960s. Taking an interview with Mario as its point of departure, this article describes the persistence of a skilled worker whose practices and techniques remain the same in a world that has long changed. While inattentive to what rules might be used to decorate a shop window, Mario continues to make and sew in the way that he learnt in post-war Italy. Mario’s persistence could be described as all the skills and other elements that need to be in place to keep him working, in particular the tradition of tailoring techniques he has remained true to over the last fifty years. The hand stitching of his tailoring is like a metronome of that persistence.

  8. Tailoring group velocity by topology optimization

    DEFF Research Database (Denmark)

    Stainko, Roman; Sigmund, Ole

    2007-01-01

    The paper describes a systematic method for the tailoring of dispersion properties of slab-based photonic crystal waveguides. The method is based on the topology optimization method which consists in repeated finite element frequency domain analyses. The goal of the optimization process is to come...... up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. An example concerning the design of a wide bandwidth, constant low group velocity waveguide demonstrate the e±ciency of the method....

  9. Behaviour of Anastrepha fraterculus

    International Nuclear Information System (INIS)

    Salles, L.A.

    1999-01-01

    A number of experiments and observations on the behaviour, host associations, attractants for adults and pupation of the South American fruit fly Anastrepha fraterculus (Wiedemann), conducted under field or semi-natural conditions are presented here. (author)

  10. Pelagic behaviour of reservoir fishes: sinusoidal swimming and associated behaviour

    OpenAIRE

    JAROLÍM, Oldřich

    2009-01-01

    Annotation Long-term fixed-location hydroacoustic study with uplooking transducer was performed during 2005 in Římov reservoir, Czech Republic. It dealt mainly with fish behaviour in the open water of reservoir, especially with sinusoidal swimming behaviour. The dependence of pelagic fish behaviour on environmental conditions was also studied.

  11. Understanding of the operation behaviour of a Passive Autocatalytic Recombiner (PAR) for hydrogen mitigation in realistic containment conditions during a severe Light Water nuclear Reactor (LWR) accident

    International Nuclear Information System (INIS)

    Payot, Frédéric; Reinecke, Ernst-Arndt; Morfin, Franck; Sabroux, Jean-Christophe; Meynet, Nicolas; Bentaib, Ahmed; March, Philippe; Zeyen, Roland

    2012-01-01

    Highlights: ► Recombineur operation in the presence of fission products (severe accident conditions). ► Operation of catalysts in the integral and small-scale tests. ► The catalyst performance was observed by measuring the coupon temperature increase. ► The experimental observations were corroborated by numerical calculations (SPARK code). - Abstract: In the context of hydrogen risk mitigation in nuclear power plants (NPPs), experimental studies of a possible poisoning of Passive Autocatalytic Recombiners (PARs) by fission products (FPs) and aerosols released during a core meltdown accident were mainly conducted in the past with non-radioactive fission product surrogates (e.g., in the H2PAR facility at Cadarache, France). The decision was taken in 1997 to complete these studies by a test in the Phébus facility, a research nuclear reactor also at Cadarache: it was a rare opportunity to expose catalyst samples to an atmosphere as representative as possible of a core meltdown accident, containing gaseous fission products and aerosols released during the degradation of an actual irradiated nuclear fuel bundle. Before testing in Phébus during the FPT3 experiment, reference and qualification tests were performed in the H2PAR facility using the same samples — the so-called “coupons” — and coupons holder to check that the apparatus was functional and correctly designed for avoiding to tamper with the thermal-hydraulics and chemical conditions in the Phébus containment. The correct operation of catalysts was checked by measuring the surface temperature increase of the coupons due to the exothermic reaction between hydrogen and oxygen. After the Phébus FPT3 test (November 2004), REKO-1 tests were initiated at Jülich, Germany, to confirm the discrepancy in coupons temperature observed in Phébus FPT3 and H2PAR PHEB-03 tests, and to study the operation behaviour of PARs. Besides, before REKO-1 tests, a first interpretation of H2PAR and Phébus experiments

  12. Tailoring endocrine treatment for early breast cancer

    NARCIS (Netherlands)

    Fontein, Duveken Berthe Yvonne

    2014-01-01

    This thesis describes several important aspects of adjuvant endocrine therapy for postmenopausal women with endocrine-sensitive, early-stage breast cancer. In our ongoing efforts to tailor treatment so as to provide the best possible care to each of our patients, we studied the influence of various

  13. Tinker Tailor Robot Pi -- The Project

    Science.gov (United States)

    Bianchi, Lynne

    2017-01-01

    Tinker Tailor Robot Pi (TTRP) is an innovative curriculum development project, which started in September 2014. It involves in-service primary and secondary teachers, university academic engineers, business partners and pupils at Key Stages 1, 2 and 3 (ages 5-14). The focus of the work has been to explore how a pedagogy for primary engineering…

  14. LIFE-STYLE SEGMENTATION WITH TAILORED INTERVIEWING

    NARCIS (Netherlands)

    KAMAKURA, WA; WEDEL, M

    The authors present a tailored interviewing procedure for life-style segmentation. The procedure assumes that a life-style measurement instrument has been designed. A classification of a sample of consumers into life-style segments is obtained using a latent-class model. With these segments, the

  15. Tailored Materials for High Efficiency CIDI Engines

    Energy Technology Data Exchange (ETDEWEB)

    Grant, G.J.; Jana, S.

    2012-03-30

    The overall goal of the project, Tailored Materials for High Efficiency Compression Ignition Direct Injection (CIDI) Engines, is to enable the implementation of new combustion strategies, such as homogeneous charge compression ignition (HCCI), that have the potential to significantly increase the energy efficiency of current diesel engines and decrease fuel consumption and environmental emissions. These strategies, however, are increasing the demands on conventional engine materials, either from increases in peak cylinder pressure (PCP) or from increases in the temperature of operation. The specific objective of this project is to investigate the application of a new material processing technology, friction stir processing (FSP), to improve the thermal and mechanical properties of engine components. The concept is to modify the surfaces of conventional, low-cost engine materials. The project focused primarily on FSP in aluminum materials that are compositional analogs to the typical piston and head alloys seen in small- to mid-sized CIDI engines. Investigations have been primarily of two types over the duration of this project: (1) FSP of a cast hypoeutectic Al-Si-Mg (A356/357) alloy with no introduction of any new components, and (2) FSP of Al-Cu-Ni alloys (Alloy 339) by physically stirring-in various quantities of carbon nanotubes/nanofibers or carbon fibers. Experimental work to date on aluminum systems has shown significant increases in fatigue lifetime and stress-level performance in aluminum-silicon alloys using friction processing alone, but work to demonstrate the addition of carbon nanotubes and fibers into aluminum substrates has shown mixed results due primarily to the difficulty in achieving porosity-free, homogeneous distributions of the particulate. A limited effort to understand the effects of FSP on steel materials was also undertaken during the course of this project. Processed regions were created in high-strength, low-alloyed steels up to 0.5 in

  16. Effect of a Chloride Transient on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Test 2)

    International Nuclear Information System (INIS)

    Ritter, S.; Seifert, H.-P.

    2002-11-01

    Within the CASTOC-project (5 t h EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. The present report is a summary of the second test of working package (WP) 3 with a NaCl transient, performed at Paul Scherrer Institut (PSI). In the first part of the experiment, an actively growing EAC crack with a crack growth rate (CGR) in the range of the 'low-sulphur SCC line' of the GE-model was generated by periodical partial unloading (PPU) in oxygenated high-temperature, high-purity water (T = 288 o C, DO = 8 ppm). Then a chloride transient of 49 ppb Cl - was applied for ∼40 h. After this transient, the load level was reduced and the loading conditions were changed to pure cyclic loading. Thereupon a second transient with a chloride concentration of 49 ppb was applied. In both RPV steels, the first chloride transient of 49 ppb Cl - resulted in an acceleration of the EAC crack growth by more than one order of magnitude and in fast, stationary SCC crack growth during the constant load phase of the PPU cycles at K I values 1/2 . 3 h after adding chloride to the high-purity water, the EAC CGR started to increase in the high-sulphur RPV steel during the constant load phase of a PPU cycle and after 20 h a stationary EAC CGR value in the range of the 'high-sulphur SCC curve' of the GE-model was reached. After 5 h in high-purity water, the crack growth began to slow down after a partial unloading cycle and 15 h later it reached again a stationary CGR value in the range of the 'low-sulphur SCC curve' of the GE-model. The second chloride transient did not result in an acceleration of the crack growth in both investigated specimens. This was explained by crack closure effects, which occurred in both specimens after the reduction of the load. The CGR

  17. Aeroelastic tailoring of composite aircraft wings

    Science.gov (United States)

    Mihaila-Andres, Mihai; Larco, Ciprian; Rosu, Paul-Virgil; Rotaru, Constantin

    2017-07-01

    The need of a continuously increasing size and performance of aerospace structures has settled the composite materials as the preferred materials in aircraft structures. Apart from the clear capacity to reduce the structural weight and with it the manufacture cost and the fuel consumption while preserving proper airworthiness, the prospect of tailoring a structure using the unique directional stiffness properties of composite materials allows an aerospace engineer to optimize aircraft structures to achieve particular design objectives. This paper presents a brief review of what is known as the aeroelastic tailoring of airframes with the intent of understanding the evolution of this research topic and at the same time providing useful references for further studies.

  18. Tailored internet-administered treatment of anxiety disorders for primary care patients: study protocol for a randomised controlled trial

    Directory of Open Access Journals (Sweden)

    Nordgren Lise

    2012-02-01

    Full Text Available Abstract Background Internet-administered cognitive behavioural therapy (ICBT has been found to be effective for a range of anxiety disorders. However, most studies have focused on one specific primary diagnosis and co-morbidity has not been considered. In primary care settings, patients with anxiety often suffer from more than one psychiatric condition, making it difficult to disseminate ICBT for specific conditions. The aim of this study will be to investigate if ICBT tailored according to symptom profile can be a feasible treatment for primary care patients with anxiety disorders. It is a randomised controlled trial aimed to evaluate the treatment against an active control group. Methods Participants with anxiety disorders and co-morbid conditions (N = 128, will be recruited from a primary care population. The Clinical Outcome in Routine Evaluation (CORE-OM will serve as the primary outcome measure. Secondary measures include self-reported depression, anxiety, quality of life and loss of production and the use of health care. All assessments will be collected via the Internet and measure points will be baseline, post treatment and 12 months post treatment. Discussion This trial will add to the body of knowledge on the effectiveness of ICBT for anxiety disorders in primary care. The trial will also add knowledge on the long term effects of ICBT when delivered for regular clinic patients Trial Registration ClinicalTrials.gov: NCT01390168

  19. Cognitive Behaviour Therapy for Post-Traumatic Stress Disorder in a Person with an Autism Spectrum Condition and Intellectual Disability: A Case Study

    Science.gov (United States)

    Carrigan, Neil; Allez, Kate

    2017-01-01

    Background: One of the difficulties in assessing and treating PTSD in people with intellectual disability is that it may not present with the typical symptoms associated with the disorder. This may be why there is a dearth of literature on the treatment of PTSD using cognitive behavioural approaches for people with intellectual disability (e.g.…

  20. Melatonin versus Placebo in Children with Autism Spectrum Conditions and Severe Sleep Problems Not Amenable to Behaviour Management Strategies: A Randomised Controlled Crossover Trial

    Science.gov (United States)

    Wright, Barry; Sims, David; Smart, Siobhan; Alwazeer, Ahmed; Alderson-Day, Ben; Allgar, Victoria; Whitton, Clare; Tomlinson, Heather; Bennett, Sophie; Jardine, Jenni; McCaffrey, Nicola; Leyland, Charlotte; Jakeman, Christine; Miles, Jeremy

    2011-01-01

    Twenty-two children with autism spectrum disorders who had not responded to supported behaviour management strategies for severe dysomnias entered a double blind, randomised, controlled crossover trial involving 3 months of placebo versus 3 months of melatonin to a maximum dose of 10 mg. 17 children completed the study. There were no significant…

  1. Creep behaviour of the alloys NiCr22Co12Mo and 10CrMo9 10 under static and cyclic load conditions

    International Nuclear Information System (INIS)

    Wolf, H.

    1990-01-01

    The creep behaviour of NiCr20Co12Mo is investigated under static strain and at 800deg C, with stresses applied ranging from 105 MPa to 370 MPa. The ferritic steel 10CrMo 9 10 is tested for its creep behaviour under static strain and at the temperatures of 600deg C and 550deg C, with stresses applied between 154 MPa and 326 MPa (at 600deg C), or between 250 MPa and 458 MPa (at 550deg C). The experiments are made to determine the effects of changes in strain on the materials' deformation behaviour, placing emphasis on transient creep and elastic or anelastic response. The mean internal stress is determined from changes in strain. Cyclic creep is analysed as a behaviour directly responding to the pattern of change in strain. Effects of certain strain changes not clarified so far are analysed. The cyclic strain experiments are analysed according to the velocity factor concept. The usual models of creep deformation (theta projection concept) are compared with the model of effective strain, which is based on the fundamental equation of plastic deformation by dislocation motion (Orowan equation). (MM) [de

  2. Tailoring electronic structure of polyazomethines thin films

    OpenAIRE

    J. Weszka; B. Hajduk; M. Domański; M. Chwastek; J. Jurusik; B. Jarząbek; H. Bednarski; P. Jarka

    2010-01-01

    Purpose: The aim of this work is to show how electronic properties of polyazomethine thin films deposited by chemical vapor deposition method (CVD) can be tailored by manipulating technological parameters of pristine films preparation as well as modifying them while the as-prepared films put into iodine atmosphere.Design/methodology/approach: The recent achievements in the field of designing and preparation methods to be used while preparing polymer photovoltaic solar cells or optoelectronic ...

  3. Improving distress in dialysis (iDiD): a feasibility two-arm parallel randomised controlled trial of an online cognitive behavioural therapy intervention with and without therapist-led telephone support for psychological distress in patients undergoing haemodialysis

    OpenAIRE

    Hudson, JL; Moss-Morris, R; Game, D; Carroll, A; McCrone, P; Hotopf, M; Yardley, L; Chilcot, J

    2016-01-01

    Psychological distress is common in end-stage kidney disease (ESKD) and is associated with poorer health outcomes. Cognitive behavioural therapy (CBT) is recommended in UK clinical guidelines for the management of depression in people with long-term conditions. Access to skilled therapists competent in managing the competing mental and physical health demands of ESKD is limited. Online CBT treatments tailored to the needs of the ESKD population offers a pragmatic solution for under-resourced ...

  4. Tailored information about cancer risk and screening: a systematic review.

    NARCIS (Netherlands)

    Albada, A.; Ausems, M.G.E.M.; Bensing, J.M.; Dulmen, S. van

    2009-01-01

    OBJECTIVE: To study interventions that provide people with information about cancer risk and about screening that is tailored to their personal characteristics. We assess the tailoring characteristics, theory base and effects on risk perception, knowledge and screening behavior of these

  5. Tailored Trustworthy Spaces: Solutions for the Smart Grid

    Data.gov (United States)

    Networking and Information Technology Research and Development, Executive Office of the President — The NITRD workshop on Tailored Trustworthy Spaces: Solutions for the Smart Grid was conceived by the Federal government to probe deeper into how Tailored Trustworthy...

  6. Tailoring consumer resources to enhance self-care in chronic heart failure.

    Science.gov (United States)

    Driscoll, Andrea; Davidson, Patricia; Clark, Robyn; Huang, Nancy; Aho, Zoe

    2009-08-01

    Chronic heart failure (CHF) is associated with high hospitalisation and mortality rates and debilitating symptoms. In an effort to reduce hospitalisations and improve symptoms individuals must be supported in managing their condition. Patients who can effectively self-manage their symptoms through lifestyle modification and adherence to complex medication regimens will experience less hospitalisations and other adverse events. The purpose of this paper is to explain how providing evidence-based information, using patient education resources, can support self-care. Self-care relates to the activities that individuals engage in relation to health seeking behaviours. Supporting self-care practices through tailored and relevant information can provide patients with resources and advice on strategies to manage their condition. Evidence-based approaches to improve adherence to self-care practices in patients with heart failure are not often reported. Low health literacy can result in poor understanding of the information about CHF and is related to adverse health outcomes. Also a lack of knowledge can lead to non-adherence with self-care practices such as following fluid restriction, low sodium diet and daily weighing routines. However these issues need to be addressed to improve self-management skills. Recently the Heart Foundation CHF consumer resource was updated based on evidence-based national clinical guidelines. The aim of this resource is to help consumers improve understanding of the disease, reduce uncertainty and anxiety about what to do when symptoms appear, encourage discussions with local doctors, and build confidence in self-care management. Evidence-based CHF patient education resources promote self-care practices and early detection of symptom change that may reduce hospitalisations and improve the quality of life for people with CHF.

  7. Documenting outdoor activity and travel behaviour in persons with neurological conditions using travel diaries and GPS tracking technology: a pilot study in multiple sclerosis.

    Science.gov (United States)

    Neven, An; Janssens, Davy; Alders, Geert; Wets, Geert; Van Wijmeersch, Bart; Feys, Peter

    2013-09-01

    Persons with multiple sclerosis (PwMS) experience several physical and cognitive problems which can influence their travel behaviour. This study aimed to document the number of activities, the activity type and the transport mode of the related trips that are daily made by PwMS. Their outdoor activity and travel behaviour was studied in relation to disease-related disability. Thirty six PwMS (Expanded Disability Status Scale, EDSS, 1.5-8.0, age 27-63) and 24 healthy controls (age 25-62) were studied, using activity-related travel diaries and GPS tracking devices. Information about overall disability characteristics was gained by standard clinical tests and questionnaires. PwMS were further divided in three subgroups based on EDSS cut-off scores 4.5 and 6.5. Persons with mild ambulatory dysfunction (EDSS 1.5-4.0, n = 17) showed similar travel characteristics to healthy controls, with few restrictions during travelling. Statistically significant changes in activity and travel behaviour were detected in the moderate (EDSS 4.5-6.5, n = 8) and severe MS subgroups (EDSS > 6.5-8.0, n = 11) compared with healthy controls: driving independently became less frequent, significant more trips were made with company and the duration of performed activities had increased. The combination of self-reported travel diaries and objective GPS loggers offered detailed information about the actual outdoor travel behaviour of PwMS, which was significantly changed in PwMS with EDSS greater than 4. Implications for Rehabilitation Activity and travel behaviour changes significantly in persons with multiple sclerosis (MS) with moderate to severe disability (EDSS greater than 4). Behavioural therapy could help to develop better coping and problem-solving skills to overcome anxiety in the making of trips by persons with MS with a mild severity. Enhancing community environments could serve as a promising approach to increase the outdoor participation of persons with (more severe

  8. Randomized controlled trial of a web-based computer-tailored smoking cessation program as a supplement to nicotine patch therapy.

    Science.gov (United States)

    Strecher, Victor J; Shiffman, Saul; West, Robert

    2005-05-01

    To assess the efficacy of World Wide Web-based tailored behavioral smoking cessation materials among nicotine patch users. Two-group randomized controlled trial. World Wide Web in England and Republic of Ireland. A total of 3971 subjects who purchased a particular brand of nicotine patch and logged-on to use a free web-based behavioral support program. Web-based tailored behavioral smoking cessation materials or web-based non-tailored materials. Twenty-eight-day continuous abstinence rates were assessed by internet-based survey at 6-week follow-up and 10-week continuous rates at 12-week follow-up. Using three approaches to the analyses of 6- and 12-week outcomes, participants in the tailored condition reported clinically and statistically significantly higher continuous abstinence rates than participants in the non-tailored condition. In our primary analyses using as a denominator all subjects who logged-on to the treatment site at least once, continuous abstinence rates at 6 weeks were 29.0% in the tailored condition versus 23.9% in the non-tailored condition (OR = 1.30; P = 0.0006); at 12 weeks continuous abstinence rates were 22.8% versus 18.1%, respectively (OR = 1.34; P = 0.0006). Moreover, satisfaction with the program was significantly higher in the tailored than in the non-tailored condition. The results of this study demonstrate a benefit of the web-based tailored behavioral support materials used in conjunction with nicotine replacement therapy. A web-based program that collects relevant information from users and tailors the intervention to their specific needs had significant advantages over a web-based non-tailored cessation program.

  9. Lay Health Influencers: How They Tailor Brief Tobacco Cessation Interventions

    Science.gov (United States)

    Yuan, Nicole P.; Castaneda, Heide; Nichter, Mark; Nichter, Mimi; Wind, Steven; Carruth, Lauren; Muramoto, Myra

    2012-01-01

    Interventions tailored to individual smoker characteristics have increasingly received attention in the tobacco control literature. The majority of tailored interventions are generated by computers and administered with printed materials or web-based programs. The purpose of this study was to examine the tailoring activities of community lay…

  10. Fission products and nuclear fuel behaviour under severe accident conditions part 3: Speciation of fission products in the VERDON-1 sample

    Science.gov (United States)

    Le Gall, C.; Geiger, E.; Gallais-During, A.; Pontillon, Y.; Lamontagne, J.; Hanus, E.; Ducros, G.

    2017-11-01

    Qualitative and quantitative analyses on the VERDON-1 sample made it possible to obtain valuable information on fission product behaviour in the fuel during the test. A promising methodology based on the quantitative results of post-test characterisations has been implemented to assess the release fraction of non γ-emitter fission products. The order of magnitude of the estimated release fractions for each fission product was consistent with their class of volatility.

  11. Parametric study of the behaviour of a pre irradiated BWR fuel rod under conditions of LOCA simulated in the halden in pile test system with the FALCON code

    Energy Technology Data Exchange (ETDEWEB)

    Khvostov, G.; Zimmermann, M. A. [Laboratory for Reactor Physics and Systems Behaviour, Paul Scherrer Institut, Villigen (Switzerland); Ledergerber, G. [Kernkraftwerk Leibstadt AG, Leibstadt (Switzerland); Kolstad, E. [Institute for Energy Technology - OECD Halden Reactor Project, Halden (Norway); Montgomery, R. O. [Anatech Corporation, San Diego (United States)

    2008-10-15

    A new LOCA test at Halden was planned as the first experiment within the Halden LOCA program addressing the behaviour of commercially irradiated BWR fuel of medium burn up with burst of the cladding expected to occur at a temperature of about 1050.deg.C, which is essentially higher than in the preceding experiments. The specific measures to be adopted have been suggested based upon a parametric study using the FALCON fuel behaviour code and aimed at an optimized design of the test fuel rod for the given high target cladding temperature of 1150 .deg. C (peak local). The analysis has shown a reasonable agreement with the fundamental experimental findings, such as correlations of NUREG 0630, as well as consistency with the data from Halden LOCA testing available so far. Thus, a general conclusion is drawn about the applicability of the methodology developed at PSI to the analysis of LWR fuel rod behaviour during LOCA, in consideration of the effects of fuel burn up.

  12. Broadband energy harvesting using acoustic black hole structural tailoring

    International Nuclear Information System (INIS)

    Zhao, Liuxian; Semperlotti, Fabio; Conlon, Stephen C

    2014-01-01

    This paper explores the concept of an acoustic black hole (ABH) as a main design framework for performing dynamic structural tailoring of mechanical systems for vibration energy harvesting applications. The ABH is an integral feature embedded in the host structure that allows for a smooth reduction of the phase velocity, theoretically approaching zero, while minimizing the reflected energy. This mechanism results in structural areas with high energy density that can be effectively exploited to develop enhanced vibration-based energy harvesting. Fully coupled electro-mechanical models of an ABH tapered structure with surface mounted piezo-transducers are developed to numerically simulate the response of the system to both steady state and transient excitations. The design performances are numerically evaluated using structural intensity data as well as the instantaneous voltage/power and energy output produced by the piezo-transducer network. Results show that the dynamically tailored structural design enables a drastic increase in the harvested energy as compared to traditional structures, both under steady state and transient excitation conditions. (papers)

  13. FitMindKit: Randomised controlled trial of an automatically tailored online program for mood, anxiety, substance use and suicidality

    Directory of Open Access Journals (Sweden)

    Philip J. Batterham

    2018-06-01

    Full Text Available Purpose: Online mental health programs can be effective in reducing symptoms of depression, anxiety disorders, substance use and suicidal ideation. However, most existing e-mental health programs focus on a single domain of mental health, neglecting comorbidity. Furthermore, few programs are tailored to the symptom patterns of the individual user. FitMindKit was designed to overcome the gaps of existing e-mental health programs, providing tailored, transdiagnostic therapeutic content to address a range of comorbid mental health symptoms. A trial was conducted to test the program's efficacy. Methods: Australian adults with elevated symptoms of depression, anxiety, suicidal ideation and/or substance use were recruited through social media, with n=194 randomised into a fully-automated trial of a 10-day brief intervention. Participants were randomly allocated to receive FitMindKit tailored to their symptoms, an untailored generic version of FitMindKit, or an attention control. Results: Mixed model repeated measures ANOVA indicated that participants in both FitMindKit and the attention control had significant reductions in symptom composite scores. Effects were not significantly greater in the FitMindKit program relative to control, either at post-test or 3-month follow-up. No effects were detected for specific decreases in depression, generalized anxiety, social anxiety, panic, suicidal ideation or alcohol/substance use. There were no significant differences between the tailored and static versions in effectiveness or adherence. Participants in the tailored and static conditions were more satisfied than in the control condition, with some evidence favouring the tailored condition. High attrition reduced power to find effects. Conclusions: FitMindKit provides a model for addressing comorbid mental health symptoms in an online program, using automated tailoring to symptom patterns. Modifications to the program are recommended, along with the need for

  14. Advances in Precision Medicine: Tailoring Individualized Therapies.

    Science.gov (United States)

    Matchett, Kyle B; Lynam-Lennon, Niamh; Watson, R William; Brown, James A L

    2017-10-25

    The traditional bench-to-bedside pipeline involves using model systems and patient samples to provide insights into pathways deregulated in cancer. This discovery reveals new biomarkers and therapeutic targets, ultimately stratifying patients and informing cohort-based treatment options. Precision medicine (molecular profiling of individual tumors combined with established clinical-pathological parameters) reveals, in real-time, individual patient's diagnostic and prognostic risk profile, informing tailored and tumor-specific treatment plans. Here we discuss advances in precision medicine presented at the Irish Association for Cancer Research Annual Meeting, highlighting examples where personalized medicine approaches have led to precision discovery in individual tumors, informing customized treatment programs.

  15. Functions of myosin motors tailored for parasitism

    DEFF Research Database (Denmark)

    Mueller, Christina; Graindorge, Arnault; Soldati-Favre, Dominique

    2017-01-01

    Myosin motors are one of the largest protein families in eukaryotes that exhibit divergent cellular functions. Their roles in protozoans, a diverse group of anciently diverged, single celled organisms with many prominent members known to be parasitic and to cause diseases in human and livestock......, are largely unknown. In the recent years many different approaches, among them whole genome sequencing, phylogenetic analyses and functional studies have increased our understanding on the distribution, protein architecture and function of unconventional myosin motors in protozoan parasites. In Apicomplexa......, myosins turn out to be highly specialized and to exhibit unique functions tailored to accommodate the lifestyle of these parasites....

  16. Suicidal behaviour

    NARCIS (Netherlands)

    Neeleman, J

    2001-01-01

    -Prevention of suicidal behaviour remains difficult, despite increasing knowledge of its determinants. Health service efforts hardly affect suicide rates. -Recent shifts in the epidemiology of suicidal behaviour are rising rates among the young and increasing use of violent methods. these can be

  17. Emergent Behaviour

    NARCIS (Netherlands)

    Blom, H.A.P.; Everdij, M.H.C.; Bouarfa, S.; Cook, A; Rivas, D

    2016-01-01

    In complexity science a property or behaviour of a system is called emergent if it is not a property or behaviour of the constituting elements of the system, though results from the interactions between its constituting elements. In the socio-technical air transportation system these interactions

  18. Tailoring of magnetic anisotropy of Fe-rich microwires by stress induced anisotropy

    International Nuclear Information System (INIS)

    Zhukov, A.; Zhukova, V.; Larin, V.; Gonzalez, J.

    2006-01-01

    We report on tailoring of magnetic properties and GMI of Fe 69 B 12 Si 14 C 5 glass-coated microwires by stress annealing. The induced magnetic anisotropy field depend on temperature and time of annealing and applied stress. At certain conditions considerable GMI effect (up to 65%) has been achieved. Application of the tensile stress drastically affects the shape of the hysteresis loop of stress-annealed sample and its GMI effect. In this way the shape of the hysteresis loop and GMI effect can by tailored by controllable way

  19. Analysis of the thermo-mechanical behaviour of the DEMO Water-Cooled Lithium Lead breeding blanket module under normal operation steady state conditions

    Energy Technology Data Exchange (ETDEWEB)

    Di Maio, P.A.; Arena, P. [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Aubert, J. [CEA Saclay, DEN/DANS/DM2S/SEMT, 91191 Gif sur Yvette Cedex (France); Bongiovì, G. [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Chiovaro, P., E-mail: pierluigi.chiovaro@unipa.it [Dipartimento di Energia, Ingegneria dell’Informazione e Modelli Matematici, Università di Palermo, Viale delle Scienze, 90128 Palermo (Italy); Giammusso, R. [ENEA – C.R. Brasimone, 40032 Camugnano (Italy); Li Puma, A. [CEA Saclay, DEN/DANS/DM2S/SEMT, 91191 Gif sur Yvette Cedex (France); Tincani, A. [ENEA – C.R. Brasimone, 40032 Camugnano (Italy)

    2015-10-15

    Highlights: • A DEMO WCLL blanket module thermo-mechanical behaviour has been investigated. • Two models of the WCLL blanket module have been set-up adopting a code based on FEM. • The water flow domain in the module has been considered. • A set of uncoupled steady state thermo-mechanical analyses has been carried out. • Critical temperature is not overcome. Safety verifications are generally satisfied. - Abstract: Within the framework of DEMO R&D activities, a research cooperation has been launched between ENEA, the University of Palermo and CEA to investigate the thermo-mechanical behaviour of the outboard equatorial module of the DEMO1 Water-Cooled Lithium Lead (WCLL) blanket under normal operation steady state scenario. The research campaign has been carried out following a theoretical–computational approach based on the Finite Element Method (FEM) and adopting a qualified commercial FEM code. In particular, two different 3D FEM models (Model 1 and Model 2), reproducing respectively the central and the lateral poloidal–radial slices of the WCLL blanket module, have been set up. A particular attention has been paid to the modelling of water flow domain, within both the segment box channels and the breeder zone tubes, to simulate realistically the coolant-box thermal coupling. Results obtained are herewith reported and critically discussed.

  20. Effect of Fe, Ni, and Cr on the corrosion behaviour of hyper-eutectic Al-Si automotive alloy under different pH conditions

    Directory of Open Access Journals (Sweden)

    Mohammad Salim Kaiser

    2018-05-01

    Full Text Available Effect of Fe, Ni and Cr on the corrosion behaviour of hyper-eutectic Al-Si automotive alloy was studied. The test of corrosion behaviour at different environmental pH 1, 3, 5, 7, 9, 11 and 13 was performed using conventional gravimetric measurements and complemented by resistivity, optical micrograph, scanning electron microscopy (SEM and X-ray analyser (EDX investigations. The highest corrosion rate was observed at pH 13 followed by pH 1, while in the pH range of 3.0 to 11, there is a high protection of surface due to formation of stable surface oxide film. The highest corrosion rate at pH 13 is due to presence of sodium hydroxide in the solution in which the surface oxide film is soluble. At pH 1, however, high corrosion rate can be attributed to dissolution of Al due to the surface attack by aggressive chloride ions. Presence of Fe, Ni and Cr in hyper-eutectic Al-Si automotive alloy has significant effect on the corrosion rate at both environmental pH values. Resistivity of alloy surfaces initially decreases at pH 1 and pH 13 due to formation of thin films. The SEM images of corroded samples immersed in pH 1 solution clearly show pores due to uniform degradation of the alloy. In pH 13 solution, however, the corrosion layer looks more packed and impermeable.

  1. Numerical investigation of the reactor pressure vessel behaviour under severe accident conditions taking into account the combined processes of the vessel creep and the molten pool natural convection

    International Nuclear Information System (INIS)

    Loktionov, V.D.; Mukhtarov, E.S.; Yaroshenko, N.I.; Orlov, V.E.

    1999-01-01

    Analysis of the WWER lower head behaviour and its failure has been performed for several molten pool structures and internal overpressure levels in a reactor pressure vessel (RPV). The different types of the molten pools (homogeneous, conventionally homogeneous, conventionally stratified, stratified) cover the bounding scenarios during a hypothetical severe accident. The parametric investigations of the failure mode and RPV behaviour for various molten pool types, its heights and internal overpressure levels are presented herein. A coupled treatment in this investigation includes: (i) a 2-D thermohydraulic analysis of a molten pool natural convection. Domestic NARAUFEM code has been used in this detailed analysis for prediction of the heat flux from the molten pool to the RPV inner surface; and (ii) a detailed 3-D transient thermal analysis of the RPV lower head. Domestic 3-D ASHTER-VVR finite element code has been used for the numerical simulations of the high temperature creep and failure of the lower head. The effect of an external RPV cooling, temperature-dependent physical properties of the molten pool and vessel steel, the hydrostatic forces and vessel dead-weight were taken into account in this study. The obtained results show that lower head failure occurs as a result of the vessel creep process which is significantly dependent on both an internal overpressure level and the type of molten pool structure. In particular, it was found that there were combinations of 'overpressure-molten pool structure' when the vessel failure started at the 'hot' layers of the vessel. (orig.)

  2. Investigating message-framing effects in the context of a tailored intervention promoting physical activity.

    Science.gov (United States)

    van 't Riet, Jonathan; Ruiter, Robert A C; Werrij, Marieke Q; de Vries, Hein

    2010-04-01

    Health-promoting messages can be framed in terms of the gains associated with healthy behaviour or the losses associated with unhealthy behaviour. It has been argued that gain-framed messages promoting physical activity (PA) are more effective than loss-framed messages, but empirical findings are inconsistent. Also, no previous studies investigated the effects of gain- and loss-framed messages in the context of a computer-tailored PA intervention. In this study, we provided participants with computer-generated tailored feedback concerning their PA levels. In total, 787 participants entered in the study, of whom 299 completed all measures at a 3-month follow-up. We investigated whether gain- and loss-framed messages promoting PA affected information acceptance, attitude, intention and behaviour differently. The results showed that gain-framed messages resulted in stronger intentions to be physically active than loss-framed messages. This did not result in a significant increase in actual PA, however, as measured by a 3-month follow-up assessment. For information acceptance and attitude, a non-significant advantage of gain-framed messages was found. All effects had small effect sizes. Thus, whereas gain-framed information might be more persuasive than loss-framed information when it comes to promoting PA, the differences between gain- and loss-framed messages are likely to be small.

  3. Controlling semiconductor nanoparticle size distributions with tailored ultrashort pulses

    International Nuclear Information System (INIS)

    Hergenroeder, R; Miclea, M; Hommes, V

    2006-01-01

    The laser generation of size-controlled semiconductor nanoparticle formation under gas phase conditions is investigated. It is shown that the size distribution can be changed if picosecond pulse sequences of tailored ultra short laser pulses (<200 fs) are employed. By delivering the laser energy in small packages, a temporal energy flux control at the target surface is achieved, which results in the control of the thermodynamic pathway the material takes. The concept is tested with silicon and germanium, both materials with a predictable response to double pulse sequences, which allows deduction of the materials' response to complicated pulse sequences. An automatic, adaptive learning algorithm was employed to demonstrate a future strategy that enables the definition of more complex optimization targets such as particle size on materials less predictable than semiconductors

  4. eHealth Literacy and Intervention Tailoring Impacts the Acceptability of a HIV/STI Testing Intervention and Sexual Decision Making among Young Gay and Bisexual Men

    OpenAIRE

    Horvath, Keith J.; Bauermeister, José A.

    2017-01-01

    We assessed whether young men who have sex with men’s acceptability with the online Get Connected! intervention and subsequent sexual health decision making were influenced by their baseline eHealth literacy (high vs. low competency) and intervention tailoring (tailored or non-tailored intervention condition). Participants (n=127) were on average 21 years old, 55% non-Hispanic white, and used the Internet 1–3 hours a day (54%). Compared to the high eHealth literacy/tailored intervention group...

  5. Deep Drawing of High-Strength Tailored Blanks by Using Tailored Tools

    Directory of Open Access Journals (Sweden)

    Thomas Mennecart

    2016-01-01

    Full Text Available In most forming processes based on tailored blanks, the tool material remains the same as that of sheet metal blanks without tailored properties. A novel concept of lightweight construction for deep drawing tools is presented in this work to improve the forming behavior of tailored blanks. The investigations presented here deal with the forming of tailored blanks of dissimilar strengths using tailored dies made of two different materials. In the area of the steel blank with higher strength, typical tool steel is used. In the area of the low-strength steel, a hybrid tool made out of a polymer and a fiber-reinforced surface replaces the steel half. Cylindrical cups of DP600/HX300LAD are formed and analyzed regarding their formability. The use of two different halves of tool materials shows improved blank thickness distribution, weld-line movement and pressure distribution compared to the use of two steel halves. An improvement in strain distribution is also observed by the inclusion of springs in the polymer side of tools, which is implemented to control the material flow in the die. Furthermore, a reduction in tool weight of approximately 75% can be achieved by using this technique. An accurate finite element modeling strategy is developed to analyze the problem numerically and is verified experimentally for the cylindrical cup. This strategy is then applied to investigate the thickness distribution and weld-line movement for a complex geometry, and its transferability is validated. The inclusion of springs in the hybrid tool leads to better material flow, which results in reduction of weld-line movement by around 60%, leading to more uniform thickness distribution.

  6. Groundwater formation under desert conditions. Part of a coordinated programme on physical and isotopic behaviour of soil moisture in the zone of aeration

    International Nuclear Information System (INIS)

    Gat, J.R.

    1984-08-01

    This paper is a final report on the research conducted with the main object to trace the behaviour of water in the subsurface of the Negev. One can distinguish three major recharge mechanisms which operate in the arid environment. Direct infiltration can take place when relatively heavy rains above the threshold of about 2 mm fall on sand dune exposures, by virtue of the open pore structure of the sand and absence of plant interceptors. On rock exposures and boulder-covered hills, recharge follows a modest scale of surface runoff, whereby a sufficient water depth is achieved to infiltrate through cracks or soil accumulators. The third major pathway for recharge utilizes the large scale regional floods, which occur following intense downpours

  7. Tailoring superelasticity of soft magnetic materials

    Science.gov (United States)

    Cremer, Peet; Löwen, Hartmut; Menzel, Andreas M.

    2015-10-01

    Embedding magnetic colloidal particles in an elastic polymer matrix leads to smart soft materials that can reversibly be addressed from outside by external magnetic fields. We discover a pronounced nonlinear superelastic stress-strain behavior of such materials using numerical simulations. This behavior results from a combination of two stress-induced mechanisms: a detachment mechanism of embedded particle aggregates and a reorientation mechanism of magnetic moments. The superelastic regime can be reversibly tuned or even be switched on and off by external magnetic fields and thus be tailored during operation. Similarities to the superelastic behavior of shape-memory alloys suggest analogous applications, with the additional benefit of reversible switchability and a higher biocompatibility of soft materials.

  8. Engineering tailored nanoparticles with microbes: quo vadis?

    Science.gov (United States)

    Prasad, Ram; Pandey, Rishikesh; Barman, Ishan

    2016-01-01

    In the quest for less toxic and cleaner methods of nanomaterials production, recent developments in the biosynthesis of nanoparticles have underscored the important role of microorganisms. Their intrinsic ability to withstand variable extremes of temperature, pressure, and pH coupled with the minimal downstream processing requirements provide an attractive route for diverse applications. Yet, controlling the dispersity and facile tuning of the morphology of the nanoparticles of desired chemical compositions remains an ongoing challenge. In this Focus Review, we critically review the advances in nanoparticle synthesis using microbes, ranging from bacteria and fungi to viruses, and discuss new insights into the cellular mechanisms of such formation that may, in the near future, allow complete control over particle morphology and functionalization. In addition to serving as paradigms for cost-effective, biocompatible, and eco-friendly synthesis, microbes hold the promise for a unique template for synthesis of tailored nanoparticles targeted at therapeutic and diagnostic platform technologies. © 2015 Wiley Periodicals, Inc.

  9. Tailored vacuum chambers for ac magnets

    International Nuclear Information System (INIS)

    Harvey, A.

    1985-01-01

    The proposed LAMPF-II accelerator has a 60-Hz booster synchrotron and a 3-Hz main ring. To provide a vacuum enclosure inside the magnets with low eddy-current losses and minimal field distortion, yet capable of carrying rf image currents and providing beam stabilization, we propose an innovative combination pipe. Structurally, the enclosure is high-purity alumina ceramic, which is strong, radiation resistant, and has good vacuum properties. Applied to the chamber are thin, spaced, silver conductors using adapted thick-film technology. The conductor design can be tailored to the stabilization requirements, for example, longitudinal conductors for image currents, circumferential for transverse stabilization. The inside of the chamber has a thin, resistive coating to avoid charge build-up. The overall 60-Hz power loss is less than 100 W/m

  10. Computer-Tailored Intervention for Juvenile Offenders

    Science.gov (United States)

    LEVESQUE, DEBORAH A.; JOHNSON, JANET L.; WELCH, CAROL A.; PROCHASKA, JANICE M.; FERNANDEZ, ANNE C.

    2012-01-01

    Studies assessing the efficacy of juvenile justice interventions show small effects on recidivism and other outcomes. This paper describes the development of a prototype of a multimedia computer-tailored intervention (“Rise Above Your Situation”or RAYS) that relies on an evidence-based model of behavior change, the Transtheoretical Model, and expert system technology to deliver assessments, feedback, printed reports, and counselor reports with intervention ideas. In a feasibility test involving 60 system-involved youths and their counselors, evaluations of the program were favorable: 91.7% of youths agreed that the program could help them make positive changes, and 86.7% agreed that the program could give their counselor helpful information about them. PMID:23264754

  11. Optimizing Tailored Health Promotion for Older Adults

    Science.gov (United States)

    Marcus-Varwijk, Anne Esther; Koopmans, Marg; Visscher, Tommy L. S.; Seidell, Jacob C.; Slaets, Joris P. J.; Smits, Carolien H. M.

    2016-01-01

    Objective: This study explores older adults’ perspectives on healthy living, and their interactions with professionals regarding healthy living. This perspective is necessary for health professionals when they engage in tailored health promotion in their daily work routines. Method: In a qualitative study, 18 semi-structured interviews were carried out with older adults (aged 55-98) living in the Netherlands. The framework analysis method was used to analyze the transcripts. Results: Three themes emerged from the data—(a) healthy living: daily routines and staying active, (b) enacting healthy living: accepting and adapting, (c) interaction with health professionals with regard to healthy living: autonomy and reciprocity. Discussion: Older adults experience healthy living in a holistic way in which they prefer to live active and independent lives. Health professionals should focus on building an equal relationship of trust and focus on positive health outcomes, such as autonomy and self-sufficiency when communicating about healthy living. PMID:28138485

  12. Tailoring CSR Strategy to Company Size?

    Directory of Open Access Journals (Sweden)

    Alexandra ZBUCHEA

    2017-09-01

    Full Text Available Corporate Social Responsibility (CSR is one of the most debated topics in the academic and professional business literature, being analyzed in a myriad of perspectives, from philosophy, to marketing, management practice, managerial strategies or financial impact. The very term of CSR implies that involving with society in a structural way that is part of a business DNA is or should be understood as a characteristic of big size companies (e.g. ‘corporations’. Academic literature and financial reports show a direct relationship between a company size and its CSR budget, therefore some conclusions have been taken that CSR is effective mostly in cases of big budgets and, consequently, of big companies. Academic research also tends to favor large corporations. Most of the literature on CSR is dedicated to large companies. Nevertheless, in the past decade, increasingly more studies have investigated the social responsibility assumed by other types of companies (such as SMEs, by public institutions or by nonprofit organizations. Our present empirical analysis based on structured academic literature review (comprehensive selection of relevant international papers and content analysis demonstrates that CSR should go beyond the classical understanding of the ‘corporation’ concept and that it should be tailored to SMEs as well. Innovation and top management support are the drivers of effective CSR adoption by SMEs, for positive results meeting specific business model requirements, as well as for society. Going beyond social responsibility as a philosophical duty, correctly tailored CSR strategies can be efficient for small and medium enterprises in meeting strategic business objectives.

  13. Synroc tailored waste forms for actinide immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Gregg, Daniel J.; Vance, Eric R. [Australian Nuclear Science and Technology Organisation, Kirrawee (Australia). ANSTOsynroc, Inst. of Materials Engineering

    2017-07-01

    Since the end of the 1970s, Synroc at the Australian Nuclear Science and Technology Organisation (ANSTO) has evolved from a focus on titanate ceramics directed at PUREX waste to a platform waste treatment technology to fabricate tailored glass-ceramic and ceramic waste forms for different types of actinide, high- and intermediate level wastes. The particular emphasis for Synroc is on wastes which are problematic for glass matrices or existing vitrification process technologies. In particular, nuclear wastes containing actinides, notably plutonium, pose a unique set of requirements for a waste form, which Synroc ceramic and glass-ceramic waste forms can be tailored to meet. Key aspects to waste form design include maximising the waste loading, producing a chemically durable product, maintaining flexibility to accommodate waste variations, a proliferation resistance to prevent theft and diversion, and appropriate process technology to produce waste forms that meet requirements for actinide waste streams. Synroc waste forms incorporate the actinides within mineral phases, producing products which are much more durable in water than baseline borosilicate glasses. Further, Synroc waste forms can incorporate neutron absorbers and {sup 238}U which provide criticality control both during processing and whilst within the repository. Synroc waste forms offer proliferation resistance advantages over baseline borosilicate glasses as it is much more difficult to retrieve the actinide and they can reduce the radiation dose to workers compared to borosilicate glasses. Major research and development into Synroc at ANSTO over the past 40 years has included the development of waste forms for excess weapons plutonium immobilization in collaboration with the US and for impure plutonium residues in collaboration with the UK, as examples. With a waste loading of 40-50 wt.%, Synroc would also be considered a strong candidate as an engineered waste form for used nuclear fuel and highly

  14. Corporate Social Behaviour

    DEFF Research Database (Denmark)

    Neergaard, Peter; Rahbek Pedersen, Esben

    2003-01-01

    Over the last decades, the industrialised countries have experienced a shift from the Keynesian state intervention paradigm towards a more market-regulated economy. Firms have found themselves in a new era, where they are expected to self-regulate their behaviour in terms of working conditions...

  15. The relationship of music preferences and the selected risk-taking and autodestructive behaviour among teenage girls subject to inpatient stay due to mental condition – pilot study

    Directory of Open Access Journals (Sweden)

    Katarzyna Krajewska

    2017-03-01

    Full Text Available During adolescence, related to the crisis of identity, attempts to separate from the family and rebellion against the reality result in the youth to be particularly susceptible to the impact of peers. Identification with the group is most often based on common interests, one of which being music. The aim of the pilot study was to assess the relationship of autodestructive and  antisocial behaviour and  music preferences of  girls subject to  inpatient stay due to  mental problems. Material and methods: Own questionnaire was used concerning music preferences, consisting of the following genres: metal, rock, pop, jazz, hip-hop, reggae, film music, sung poetry, electronic music. The studied group comprised of 26 girls diagnosed with mood disorders, neurotic, stress-related and somatoform disorders, eating disorders and behavioural and emotional disorders according to ICD-10. Exclusion criteria were the remaining diagnostic categories, especially active psychotic process and mental retardation as well as lack of understanding of the questionnaire questions or not being familiar with basic types of music. Among the patients aged 13–18 subject to inpatient stay at the Department of Adolescent Psychiatry in Łódź in the period 2013–2014 and consented to the study, the incidence of attempted suicide, inflicting self-harm, alcohol abuse, taking psychoactive substances and the presence of antisocial disorders were assessed. Questionnaire verification was carried out in a group of 30 people tested with a test–retest method with a two-week break; reliability was obtained: 0.89–1. Analysis was carried out with the use of Statistica 9.1 programme. Results: Among the teenage girls subject to inpatient stay, music preferences were not related in a statistically significant manner (p > 0.05 with a greater incidence of attempted suicide, inflicting self-harm, alcohol abuse and contact with psychoactive

  16. Molecular tailoring approach for exploring structures, energetics and ...

    Indian Academy of Sciences (India)

    Administrator

    Keywords. Molecular clusters; linear scaling methods; molecular tailoring approach (MTA); Hartree– ..... energy decomposition analysis also performed and which clearly ... through molecular dynamics simulation furnished by. Takeguchi,. 46.

  17. Improving Distress in Dialysis (iDiD):A tailored CBT self-management treatment for dialysis patients

    OpenAIRE

    Hudson, Joanna L; Moss-Morris, Rona; Game, David; Carroll, Amy; Chilcot, Joseph

    2016-01-01

    BackgroundThere is significant psychological distress in adults with end-stage kidney disease (ESKD). However, psychological treatments tailored to address the unique challenges of kidney failure are absent. We identified psychological correlates of distress in ESKD to develop a cognitive-behavioural therapy (CBT) treatment protocol that integrates the mental health needs of patients alongside their illness self-management demands.MethodsStudies which examined relationships between distress a...

  18. Tailoring cyanobacterial cell factory for improved industrial properties.

    Science.gov (United States)

    Luan, Guodong; Lu, Xuefeng

    Photosynthetic biomanufacturing provides a promising solution for sustainable production of biofuels and biochemicals. Cyanobacteria are among the most promising microbial platforms for the construction of photosynthetic cell factories. Metabolic engineering of cyanobacteria has enabled effective photosynthetic synthesis of diverse natural or non-natural metabolites, while commercialization of photosynthetic biomanufacturing is usually restricted by process and economic feasibilities. In actual outdoor conditions, active cell growth and product synthesis is restricted to narrow light exposure windows of the day-night cycles and is threatened by diverse physical, chemical, and biological environmental stresses. For biomass harvesting and bioproduct recovery, energy and cost consuming processing and equipment is required, which further decreases the economic and environmental competitiveness of the entire process. To facilitate scaled photosynthetic biomanufacturing, lots of efforts have been made to engineer cyanobacterial cell properties required by robust & continual cultivation and convenient & efficient recovery. In this review, we specifically summarized recently reported engineering strategies on optimizing industrial properties of cyanobacterial cells. Through systematically re-editing the metabolism, morphology, mutualism interaction of cyanobacterial chassis cells, the adaptabilities and compatibilities of the cyanobacterial cell factories to the industrial process could be significantly improved. Cell growth and product synthesis of the tailored cyanobacterial cells could be expanded and maintained at night and in stressful environments, while convenient biomass harvesting could also be expected. For developing more feasible cyanobacterial photosynthetic biomanufacturing in large scale, we here propose the importance of tailoring industrial properties of cyanobacteria and outline the directions that should be exploited in the future. Copyright © 2018

  19. Impact of some environmental conditions on the tensile, creep-recovery, relaxation, melting and crystallinity behaviour of UHMWPE-GUR 410-medical grade

    International Nuclear Information System (INIS)

    Mourad, A.-H.I.; Fouad, H.; Elleithy, Rabeh

    2009-01-01

    The present work was undertaken to examine the effect of some environmental media (sodium hydroxide NaOH solution, water, ice, UV irradiation dose and pre-heat treatment) on the mechanical (quasi-static tensile creep-recovery and relaxation) and physical/thermal (melting and crystallinity) behaviour of the ultra high molecular weight polyethylene (UHMWPE-GUR 410-medical grade), that has several biomedical and engineering applications. The results show changes in the mechanical properties due to these environmental effects. The pre-heat treatment has significantly enhanced the tensile properties compared to virgin specimens' properties. Improvement due to pre-heat treatment at 100 o C is more than that at 50 o C. Specimens' storing in ice, NaOH and water has not affected significantly the tensile properties. All properties except fracture strain have enhanced due to specimens exposure to UV irradiation. The differential scanning calorimetry results indicate that environmental media have not any noticeable effects on the melting temperature. However, a significant increase in the degree of crystallinity was observed for all specimens versus that for virgin specimens. The creep and permanent strains of the tested virgin material increase with temperature and lineally increase with applied load. The specimens' exposure to environmental media has improved the creep resistance and the permanent creep strain when compared with that for virgin ones. Remarkable increase was observed in the initial relaxation and residual stress of the exposed specimens against that for virgin specimens.

  20. Promoting a Culture of Tailoring for Systems Engineering Policy Expectations

    Science.gov (United States)

    Blankenship, Van A.

    2016-01-01

    NASA's Marshall Space Flight Center (MSFC) has developed an integrated systems engineering approach to promote a culture of tailoring for program and project policy requirements. MSFC's culture encourages and supports tailoring, with an emphasis on risk-based decision making, for enhanced affordability and efficiency. MSFC's policy structure integrates the various Agency requirements into a single, streamlined implementation approach which serves as a "one-stop-shop" for our programs and projects to follow. The engineers gain an enhanced understanding of policy and technical expectations, as well as lesson's learned from MSFC's history of spaceflight and science missions, to enable them to make appropriate, risk-based tailoring recommendations. The tailoring approach utilizes a standard methodology to classify projects into predefined levels using selected mission and programmatic scaling factors related to risk tolerance. Policy requirements are then selectively applied and tailored, with appropriate rationale, and approved by the governing authorities, to support risk-informed decisions to achieve the desired cost and schedule efficiencies. The policy is further augmented by implementation tools and lifecycle planning aids which help promote and support the cultural shift toward more tailoring. The MSFC Customization Tool is an integrated spreadsheet that ties together everything that projects need to understand, navigate, and tailor the policy. It helps them classify their project, understand the intent of the requirements, determine their tailoring approach, and document the necessary governance approvals. It also helps them plan for and conduct technical reviews throughout the lifecycle. Policy tailoring is thus established as a normal part of project execution, with the tools provided to facilitate and enable the tailoring process. MSFC's approach to changing the culture emphasizes risk-based tailoring of policy to achieve increased flexibility, efficiency

  1. Behaviour at landfills of waste having undergone mechanic-biological and thermal conditioning; Deponieverhalten mechanisch-biologisch und thermisch behandelten Restabfalls

    Energy Technology Data Exchange (ETDEWEB)

    Danhamer, H.; Dach, J.; Jager, J. [Institut WAR, Darmstadt (Germany). FG Abfalltechnik

    1998-12-31

    The work studies, in landfill test reactors, water, gas and heat transport as well as gas and leachate formation in waste having undergone mechanical-biological and thermal conditioning. (orig.) [Deutsch] Es wurde der Wasser-, Gas- und Waermetransport, sowie die Gasbildung- und Sickerwasserbelastung mechanisch-biologisch und thermisch vorbehandelter Abfaelle in Deponieversuchsreaktoren untersucht. (orig.)

  2. Human Motion Capture Data Tailored Transform Coding.

    Science.gov (United States)

    Junhui Hou; Lap-Pui Chau; Magnenat-Thalmann, Nadia; Ying He

    2015-07-01

    Human motion capture (mocap) is a widely used technique for digitalizing human movements. With growing usage, compressing mocap data has received increasing attention, since compact data size enables efficient storage and transmission. Our analysis shows that mocap data have some unique characteristics that distinguish themselves from images and videos. Therefore, directly borrowing image or video compression techniques, such as discrete cosine transform, does not work well. In this paper, we propose a novel mocap-tailored transform coding algorithm that takes advantage of these features. Our algorithm segments the input mocap sequences into clips, which are represented in 2D matrices. Then it computes a set of data-dependent orthogonal bases to transform the matrices to frequency domain, in which the transform coefficients have significantly less dependency. Finally, the compression is obtained by entropy coding of the quantized coefficients and the bases. Our method has low computational cost and can be easily extended to compress mocap databases. It also requires neither training nor complicated parameter setting. Experimental results demonstrate that the proposed scheme significantly outperforms state-of-the-art algorithms in terms of compression performance and speed.

  3. Tailorable software architectures in the accelerator control system environment

    International Nuclear Information System (INIS)

    Mejuev, Igor; Kumagai, Akira; Kadokura, Eiichi

    2001-01-01

    Tailoring is further evolution of an application after deployment in order to adapt it to requirements that were not accounted for in the original design. End-user tailorability has been extensively researched in applied computer science from HCl and software engineering perspectives. Tailorability allows coping with flexibility requirements, decreasing maintenance and development costs of software products. In general, dynamic or diverse software requirements constitute the need for implementing end-user tailorability in computer systems. In accelerator physics research the factor of dynamic requirements is especially important, due to frequent software and hardware modifications resulting in correspondingly high upgrade and maintenance costs. In this work we introduce the results of feasibility study on implementing end-user tailorability in the software for accelerator control system, considering the design and implementation of distributed monitoring application for 12 GeV KEK Proton Synchrotron as an example. The software prototypes used in this work are based on a generic tailoring platform (VEDICI), which allows decoupling of tailoring interfaces and runtime components. While representing a reusable application-independent framework, VEDICI can be potentially applied for tailoring of arbitrary compositional Web-based applications

  4. Deep drawing simulations of tailored blanks and experimental verification

    NARCIS (Netherlands)

    Meinders, Vincent T.; van den Berg, Albert; Huetink, Han

    2000-01-01

    Tailored Blanks are increasingly used in the automotive industry. A combination of different materials, thickness, and coatings can be welded together to form a blank for stamping car body panels. The main advantage of using Tailored Blanks is to have specific characteristics at particular parts of

  5. Tailoring self-assembled monolayers at the electrochemical interface

    Indian Academy of Sciences (India)

    Administrator

    (SAMs) for functionalisation with different receptors, catalytic materials, biomolecules, enzymes, anti- gen-antibody, etc for various applications. ... and tailoring of SAMs by incorporation of suitable recognition elements. ... compatible with most organic functional groups and ...... the interfacial architecture can be tailored using.

  6. Occupants' window opening behaviour

    DEFF Research Database (Denmark)

    Fabi, Valentina; Andersen, Rune Korsholm; Corgnati, Stefano

    2012-01-01

    Energy consumption in buildings is influenced by several factors related to the building properties and the building controls, some of them highly connected to the behaviour of their occupants.In this paper, a definition of items referring to occupant behaviour related to the building control...... systems is proposed, based on studies presented in literature and a general process leading to the effects on energy consumptions is identified.Existing studies on the topic of window opening behaviour are highlighted and a theoretical framework to deal with occupants' interactions with building controls......, aimed at improving or maintaining the preferred indoor environmental conditions, is elaborated. This approach is used to look into the drivers for the actions taken by the occupants (windows opening and closing) and to investigate the existing models in literature of these actions for both residential...

  7. Tailoring the mechanical and biodegradable properties of binary blends of biomedical thermoplastic elastomer.

    Science.gov (United States)

    Ang, Hui Ying; Chan, Jingni; Toong, Daniel; Venkatraman, Subbu S; Chia, Sing Joo; Huang, Ying Ying

    2018-03-01

    Blending polymers with complementary properties capitalizes on the inherent advantages of both components, making it possible to tailor the behaviour of the resultant material. A polymer blend consisting of an elastomer and thermoplastic can help to improve the mechanical integrity of the system without compromising on its processibility. A series of blends of biodegradable Poly(L-lactide-co-ɛ-caprolactone) (PLC) and Poly-(l,l-lactide-co-glycolic acid) (PLLGA), and PLC with Poly-(d,l-lactide-co-glycolic acid) (PDLLGA) were evaluated as a potential material for a biodegradable vesicourethral connector device. Based on the Tg of the blends, PLC/PLLGA formed an immiscible mixture while PLC/PDLLGA resulted in a compatible blend. The results showed that with the blending of PLC, the failure mode of PLLGA and PDLLGA changed from brittle to ductile fracture, with an significant decreas in tensile modulus and strength. SEM images demonstrated the different blend morphologies of different compositions during degradation. Gel Permeation Chromatography (GPC) and mechanical characterization revealed the degradation behaviour of the blends in this order (fastest to slowest): PDLLGA and PLC/PDLLGA blends > PLLGA and PLC/PLLGA blends > PLC. The PLC/PLLGA (70:30) blend was recommended as a suitable for the vesicourethral connector device application, highlighting the tailoring of blends to achieve a desired mechanical performance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends

    International Nuclear Information System (INIS)

    Murray, Kieran A.; Kennedy, James E.; McEvoy, Brian; Vrain, Olivier; Ryan, Damien; Cowman, Richard; Higginbotham, Clement L.

    2014-01-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. - Highlights: • PEBA was melt blended with Irganox 565 and Tinuvin 783. • All virgin and blended PEBA samples were exposed to electron beam irradiation. • Virgin and blended PEBA was exposed to different temperatures during irradiation. • Non-vacuum and vacuum packed PEBA samples were compared following irradiation. • Virgin PEBA with non-vacuum packaging in dry ice improved the radiation resistance

  9. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends

    Energy Technology Data Exchange (ETDEWEB)

    Murray, Kieran A., E-mail: kmurray@research.ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland); Kennedy, James E., E-mail: jkennedy@ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland); McEvoy, Brian, E-mail: Brian.Mcevoy@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Vrain, Olivier, E-mail: Olivier.Vrain@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Ryan, Damien, E-mail: Damien.Ryan@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Cowman, Richard, E-mail: Richard.Cowman@synergyhealthplc.com [Synergy Health, IDA Business and Technology Park, Sragh, Tullamore, Co. Offaly (Ireland); Higginbotham, Clement L., E-mail: chigginbotham@ait.ie [Materials Research Institute, Athlone Institute of Technology, Dublin Road, Athlone, Co. Westmeath (Ireland)

    2014-06-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. - Highlights: • PEBA was melt blended with Irganox 565 and Tinuvin 783. • All virgin and blended PEBA samples were exposed to electron beam irradiation. • Virgin and blended PEBA was exposed to different temperatures during irradiation. • Non-vacuum and vacuum packed PEBA samples were compared following irradiation. • Virgin PEBA with non-vacuum packaging in dry ice improved the radiation resistance.

  10. Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends.

    Science.gov (United States)

    Murray, Kieran A; Kennedy, James E; McEvoy, Brian; Vrain, Olivier; Ryan, Damien; Cowman, Richard; Higginbotham, Clement L

    2014-06-01

    The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method. Copyright © 2014. Published by Elsevier B.V.

  11. Consumer behaviours

    DEFF Research Database (Denmark)

    Grønhøj, Alice

    2016-01-01

    Energy-saving programmes are increasingly targeted at children to encourage household energy conservation. A study involving the assignment of energy-saving interventions to Girl Scouts shows that a child-focused intervention can improve energy-saving behaviours among children and their parents....

  12. The influence of Boron on creep-rupture behaviour of austenitic unstabilized and Nb-stabilized stainless steel X8CrNi 1613 in unirradiated and irradiated condition

    International Nuclear Information System (INIS)

    Sen, Susant Kumar.

    1976-10-01

    The present study deals with influence of boron on creep-rupture behaviour in unirradiated condition at 650 0 C along with precipitation behaviour, heat-treatment and recrystallization of unstabilized and stabilized steel. The results of creep-rupture tests on unirradiated specimens show that boron exerts a beneficial effect on the rupture life and ductility. Boron losses its beneficial effect on creep properties in unstabilized steel by prolong creeping. The magnitude of beneficial effect of Boron on creep properties depends upon the initial boron distribution which influences the number, size and distribution of the precipitates. Boron promotes the precipitation of type M 23 C 6 Carbides in the grain as well as at the grain boundary. Boron segregates in atomic form during slow cooling from austenitizing temperature. The recrystallization will be delayed by the presence of boron. The results of creep tests at 650 0 C shows that boron exerts a beneficial effect on creep life of irradiated steels. (orig./GSC) [de

  13. Workplace and HIV-related sexual behaviours and perceptions among female migrant workers

    Science.gov (United States)

    YANG, H.; LI, X.; STANTON, B.; FANG, X.; LIN, D.; MAO, R.; LIU, H.; CHEN, X.; SEVERSON, R.

    2007-01-01

    Data from 1,543 female migrants working in eight occupational clusters in Beijing and Nanjing, China were analysed to examine the association of workplace with HIV-related behaviours and perceptions. For sexually experienced women (n = 666, 43.2%), those working in entertainment establishments or personal service (e.g., nightclubs, dancing halls, barbershops, beauty salons, massage parlours, etc.) engaged in risky sexual practices twice as frequently as those working in non-entertainment establishments (e.g. restaurants, stalls, domestic service, factories, etc.). About 10% of women in the entertainment establishments reported having sold sex, 30% having multiple sexual partners and 40% having sex with men with multiple sexual partners. The rate of consistent condom use was less than 15%. They also tended to have a higher level of perceptions of both peer risk involvement and positive expectancy of risk behaviours, and lower perceptions of severity of STDs and HIV. For women who were not sexually experienced, those working in ‘stalls’ or ‘domestic service’ tended to perceive higher peer risk involvement, less severity of HIV infection, and less effectiveness of protective behaviour. The occupational pattern of sexual risk behaviours and perceptions observed in the current study indicates employment conditions are associated with HIV risk. Intervention strategies should be tailored to address occupational-related factors. PMID:16120499

  14. Workplace and HIV-related sexual behaviours and perceptions among female migrant workers.

    Science.gov (United States)

    Yang, H; Li, X; Stanton, B; Fang, X; Lin, D; Mao, R; Liu, H; Chen, X; Severson, R

    2005-10-01

    Data from 1,543 female migrants working in eight occupational clusters in Beijing and Nanjing, China were analysed to examine the association of workplace with HIV-related behaviours and perceptions. For sexually experienced women (n = 666, 43.2%), those working in entertainment establishments or personal service (e.g., nightclubs, dancing halls, barbershops, beauty salons, massage parlours, etc.) engaged in risky sexual practices twice as frequently as those working in non-entertainment establishments (e.g. restaurants, stalls, domestic service, factories, etc.). About 10% of women in the entertainment establishments reported having sold sex, 30% having multiple sexual partners and 40% having sex with men with multiple sexual partners. The rate of consistent condom use was less than 15%. They also tended to have a higher level of perceptions of both peer risk involvement and positive expectancy of risk behaviours, and lower perceptions of severity of STDs and HIV. For women who were not sexually experienced, those working in 'stalls' or 'domestic service' tended to perceive higher peer risk involvement, less severity of HIV infection, and less effectiveness of protective behaviour. The occupational pattern of sexual risk behaviours and perceptions observed in the current study indicates employment conditions are associated with HIV risk. Intervention strategies should be tailored to address occupational-related factors.

  15. The need for a behavioural analysis of behavioural addictions.

    Science.gov (United States)

    James, Richard J E; Tunney, Richard J

    2017-03-01

    This review discusses research on behavioural addictions (i.e. associative learning, conditioning), with reference to contemporary models of substance addiction and ongoing controversies in the behavioural addictions literature. The role of behaviour has been well explored in substance addictions and gambling but this focus is often absent in other candidate behavioural addictions. In contrast, the standard approach to behavioural addictions has been to look at individual differences, psychopathologies and biases, often translating from pathological gambling indicators. An associative model presently captures the core elements of behavioural addiction included in the DSM (gambling) and identified for further consideration (internet gaming). Importantly, gambling has a schedule of reinforcement that shows similarities and differences from other addictions. While this is more likely than not applicable to internet gaming, it is less clear whether it is so for a number of candidate behavioural addictions. Adopting an associative perspective, this paper translates from gambling to video gaming, in light of the existing debates on this matter and the nature of the distinction between these behaviours. Finally, a framework for applying an associative model to behavioural addictions is outlined, and it's application toward treatment. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  16. Does tailoring really make a difference? : the development and evaluation of tailored interventions aimed at benzodiazepine cessation

    NARCIS (Netherlands)

    Wolde, Geeske Brecht ten

    2008-01-01

    Because of the problems associated with chronic benzodiazepine use, there is impetus to prevent and reduce chronic benzodiazepine use. The overall aim was to develop a 'tailor-made' intervention in order to reduce chronic use. Before developing tailored patient education, it is first of all

  17. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    International Nuclear Information System (INIS)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang; Gao, Ziwei

    2015-01-01

    A successive anchoring of Ti(NMe 2 ) 4 , cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, 13 C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, 13 C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated

  18. Thin tailored composite wing for civil tiltrotor

    Science.gov (United States)

    Rais-Rohani, Masoud

    1994-01-01

    The tiltrotor aircraft is a flight vehicle which combines the efficient low speed (i.e., take-off, landing, and hover) characteristics of a helicopter with the efficient cruise speed of a turboprop airplane. A well-known example of such vehicle is the Bell-Boeing V-22 Osprey. The high cruise speed and range constraints placed on the civil tiltrotor require a relatively thin wing to increase the drag-divergence Mach number which translates into lower compressibility drag. It is required to reduce the wing maximum thickness-to-chord ratio t/c from 23% (i.e., V-22 wing) to 18%. While a reduction in wing thickness results in improved aerodynamic efficiency, it has an adverse effect on the wing structure and it tends to reduce structural stiffness. If ignored, the reduction in wing stiffness leads to susceptibility to aeroelastic and dynamic instabilities which may consequently cause a catastrophic failure. By taking advantage of the directional stiffness characteristics of composite materials the wing structure may be tailored to have the necessary stiffness, at a lower thickness, while keeping the weight low. The goal of this study is to design a wing structure for minimum weight subject to structural, dynamic and aeroelastic constraints. The structural constraints are in terms of strength and buckling allowables. The dynamic constraints are in terms of wing natural frequencies in vertical and horizontal bending and torsion. The aeroelastic constraints are in terms of frequency placement of the wing structure relative to those of the rotor system. The wing-rotor-pylon aeroelastic and dynamic interactions are limited in this design study by holding the cruise speed, rotor-pylon system, and wing geometric attributes fixed. To assure that the wing-rotor stability margins are maintained a more rigorous analysis based on a detailed model of the rotor system will need to ensue following the design study. The skin-stringer-rib type architecture is used for the wing

  19. Behaviour of I/Br/Cl-THMs and their projected toxicities under simulated cooking conditions: Effects of heating, table salt and residual chlorine.

    Science.gov (United States)

    Yan, Mingquan; Li, Mingyang; Han, Xuze

    2016-08-15

    This study examined the effects of heating, residual chlorine and concentration of table salt on the generation of iodine-, bromine- and chlorine-containing trihalomethanes (THMs) under simulated cooking conditions. In the case of addition of either KI- or KIO3-fortified salt, total I-THM concentrations increased with increasing iodine concentration, while total Cl/Br-THM concentrations decreased. CHCl2I, CHBrClI, CHBrI2, CHBr2I and CHI3 were formed in the presence of KI salt, while only CHCl2I was formed in the presence of KIO3 salt. CHCl2I was unstable under cooking conditions, and >90% of this DBP was removed during heating, which in some cases increased the concentrations of the other I-THMs. The calculated cytotoxicity increased with addition of KI- or KIO3-fortified salt due to the generation of I-THMs, whose impact on the cytotoxicity at room temperature was equal to or five times higher, respectively, than the cytotoxicity of the simultaneously formed Cl/Br-THMs for the cases of salts. Heating decreased the cytotoxicity, except for the case of addition of KI salt, in which the calculated cytotoxicity of I-THMs increased above 150% as the temperature was increased up to 100°C. The reported results may have important implications for epidemiologic exposure assessments and, ultimately, for public health protection. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Carbon steel corrosion under anaerobic-aerobic cycling conditions in near-neutral pH saline solutions - Part 1: Long term corrosion behaviour

    International Nuclear Information System (INIS)

    Sherar, B.W.A.; Keech, P.G.; Shoesmith, D.W.

    2011-01-01

    Highlights: → Anaerobic-aerobic cycling on pipeline steel forms two distinct surface morphologies. → Seventy-five percentage of the surface was covered by a black, compact layer ∼4.5 μm thick. → A tubercle, ∼3 to 4 mm in cross section, covered the remaining 25% of surface. → The tubercle cross section showed a single large pit ∼275 μm deep. - Abstract: The influence of anaerobic-aerobic cycling on pipeline steel corrosion was investigated in near-neutral carbonate/sulphate/chloride solution (pH 9) over 238 days. The corrosion rate increased and decreased as exposure conditions were switched between redox conditions. Two distinct corrosion morphologies were observed. The majority of the surface corroded uniformly to produce a black magnetite/maghemite layer approximately 4.5 μm thick. The remaining surface was covered with an orange tubercle, approximately 3-4 mm in cross section. Analysis of the tubercle cross section revealed a single large pit approximately 275 μm deep. Repeated anaerobic-aerobic cycling localized the corrosion process within this tubercle-covered pit.

  1. Behaviour of lactic acid bacteria populations in Pecorino di Carmasciano cheese samples submitted to environmental conditions prevailing in the gastrointestinal tract: evaluation by means of a polyphasic approach.

    Science.gov (United States)

    Ricciardi, Annamaria; Blaiotta, Giuseppe; Di Cerbo, Alessandro; Succi, Mariantonietta; Aponte, Maria

    2014-06-02

    The survival of the autochthonous microflora, of samples collected during Pecorino di Carmasciano cheese manufacturing, was evaluated along the passage through a model mimicking the gastro-intestinal tract. The aim was the selection of lactic acid bacteria potentially able to arrive alive and metabolically active to the colon. The dynamics of lactic microbiota, throughout simulated digestion of cheese samples, were evaluated by means of an approach PCR-DGGE-based. Dominant species after cheese digestion could be related to the Lactobacillus plantarum and Lactobacillus casei groups. Sixty-three strains, which survived to simulated gastro-intestinal transit, were further evaluated for technological features and tolerance to human digestion in several experimental conditions, according to routinely used protocols. Bacterial survival appeared to be, more than strain-specific, strongly affected by experimental conditions, i.e. some strains showed an acceptable survival when resuspended in skim milk but not in ewe milk and vice versa. Nevertheless according to data, one gram of fresh Pecorino di Carmasciano cheese may convey to human colon about the same amount of viable LAB of a probiotic drink. Although it cannot be assumed that lactobacilli introduced with Pecorino have beneficial effects on the host, the healthy impact of autochthonous lactic acid bacteria of naturally fermented food has a broad consensus in the current literature. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. One-dimensional integral equations for a system of three identical particles in the boundary condition models and the possibility of changing the off-shell behaviour of the two-particle t-matrix

    International Nuclear Information System (INIS)

    Efimov, V.N.; Schulz, H.

    1976-01-01

    It is shown that in the framework of the boundary condition models (BCM) for the two-particle interaction the Schroedinger equation for the system of three identical bosons can be reduced to the one-dimensional integral equation in an exact way. The method used for obtaining such an equation is based on a special consideration of the two-particle off-shell wave functions. The binding energy of the simple three-particle system is calculated. It is indicated that by means of the equation obtained it is possible to change the off-shell behaviour of the two-particle t-matrix and therefore to simulate three particle effects. (Auth.)

  3. Development of a kinetic model, including rate constant estimations, on iodine and caesium behaviour in the primary circuit of LWR's under accident conditions

    International Nuclear Information System (INIS)

    Alonso, A.; Buron, J.M.; Fernandez, S.

    1991-07-01

    In this report, a kinetic model has been developed with the aim to try to reproduce the chemical phenomena that take place in a flowing system containing steam, hydrogen and iodine and caesium vapours. The work is divided into two different parts. The first part consists in the estimation, through the Activited Complex Theory, of the reaction rate constants, for the chosen reactions, and the development of the kinetic model based on the concept of ideal tubular chemical reactor. The second part deals with the application of such model to several cases, which were taken from the Phase B 'Scoping Calculations' of the Phebus-FP Project (sequence AB) and the SFD-ST and SFD1.1 experiments. The main conclusion obtained from this work is that the assumption of instantaneous equilibrium could be inacurrate in order to estimate the iodine and caesium species distribution under severe accidents conditions

  4. The experimental testing of the long-term behaviour of cemented radioactive waste from nuclear research reactors in the geological disposal conditions of the boom clay

    International Nuclear Information System (INIS)

    Sneyers, A.; Marivoet, J.; Iseghem, P. van

    1998-01-01

    Liquid wastes, resulting from the reprocessing of spent nuclear fuel from the BR-2 Materials Testing Reactor, will be conditioned in a cement matrix at the dedicated cementation facility of UKAEA at Dounreay. In Belgium, the Boom clay formation is studied as a potential host rock for the final geological disposal of cemented research reactor waste. In view of evaluating the safety of disposal, laboratory leach experiments and in situ tests have been performed. Leach experiments in synthetic clay water indicate that the leach rates of calcium and silicium are relatively low compared to those of sodium and potassium. In situ experiments on inactive samples are performed in order to obtain information on the microchemical and mineralogical changes of the cemented waste in contact with the Boom clay. Finally, results from a preliminary performance assessment calculation suggest a non-negligible maximum dose rate of 5 10 -9 Sv/a for 129 I. (author)

  5. The experimental testing of the long-term behaviour of cemented radioactive waste from nuclear research reactors in the geological disposal conditions of the boom clay

    Energy Technology Data Exchange (ETDEWEB)

    Sneyers, A.; Marivoet, J.; Iseghem, P. van [SCK-CEN, B-2400 Mol (Belgium)

    1998-07-01

    Liquid wastes, resulting from the reprocessing of spent nuclear fuel from the BR-2 Materials Testing Reactor, will be conditioned in a cement matrix at the dedicated cementation facility of UKAEA at Dounreay. In Belgium, the Boom clay formation is studied as a potential host rock for the final geological disposal of cemented research reactor waste. In view of evaluating the safety of disposal, laboratory leach experiments and in situ tests have been performed. Leach experiments in synthetic clay water indicate that the leach rates of calcium and silicium are relatively low compared to those of sodium and potassium. In situ experiments on inactive samples are performed in order to obtain information on the microchemical and mineralogical changes of the cemented waste in contact with the Boom clay. Finally, results from a preliminary performance assessment calculation suggest a non-negligible maximum dose rate of 5 10{sup -9} Sv/a for {sup 129}I. (author)

  6. [Use of the AquaDuc T® round drinker with Pekin ducks under field conditions--behaviour as one indicator of welfare].

    Science.gov (United States)

    Rauch, Elke; Firnkäs, Nina; Hirsch, Nicola; Damme, Klaus; Schmidt, Paul; Erhard, Michael H; Bergmann, Shana

    2016-01-01

    Pekin ducks have an innate affinity for water. They seek water from the first day of life and use it for a multitude of behaviors. Currently implemented requirements to husbandry and the design of an animal-friendly offer of drinking water in commercial fattening establishments exist neither at EU-level nor in Germany. Aim of the study was to examine the use of the AquaDuc T® (Big Dutchman, Vechta, Germany) and its practical suitability concerning the behavior during the fattening of Pekin ducks under commercial conditions. The examinations took place in three farms (7140-13,515 fattening places). On farm 1 and 3, 16 fattening periods were observed (switch-over design: alternately test and control trial) with each one visited between day 28-32 and 35-39. On farm 2, only ten fattening periods could be examined. The ducks were in general supplied with drinking water via nipple drinkers. For the test trials, the AquaDuc T® drinkers were additionally installed and were accessible for a limited time. To record the natural and undisturbed behavior of the ducks in their housing system, the video recordings were started after we finished the farm visits and in total more than 6300 hours of video material were analyzed. All findings show that Pekin ducks clearly favor the round bell drinkers over the nipple drinkers. They enable the birds to immerse their heads, to drink and strain in a species-specific manner, to take care of the plumage with water and to clean beak and eyes. In the test trials, the drinking activity rose significantly during the operating time of the round drinkers (p ducks very good conditions for an animal-friendly water supply. For economic and hygienic reasons, the daily access to the modified round drinkers should be limited.

  7. Theoretical and experimental study of the bio-geochemical behaviour of americium 241 in simplified rhizosphere conditions. Application to a calcareous agricultural soil

    International Nuclear Information System (INIS)

    Perrier, T.

    2004-06-01

    Americium 241, is one of the most radio-toxic contaminant produced during the nuclear fuel cycle. It can be found in all environmental compartments, in particular the soils. The main goals of this study are to identify, quantify and model the effect of the main factors controlling the mobility of 241 Am in the rhizosphere and the agricultural soils. The physico-chemical parameters of the soil and of the soil solution, the potential role of microorganisms on the sorption-desorption processes, and the speciation of americium in solution have been more particularly studied. 241 Am remobilization has been studied at the laboratory using leaching experiments performed in controlled conditions on reworked calcareous soils artificially contaminated with 241 Am. The soil samples have been washed out in different hydrodynamic conditions by solutions with various compositions. The eluted solution has been analyzed (pH, conductivity, ionic composition, Fe tot , organic acids, 241 Am) and its bacterial biomass content too. The overall results indicate that 241 Am remobilization is contrasted and strongly linked with the condition under study (pH, ionic strength, glucose and/or citrate concentration). Therefore, a solution in equilibrium with the soil or containing small exudate concentrations (10 -4 M) re-mobilizes only a very small part of the americium fixed on the solid phase. The desorption of 241 Am corresponds to a solid/liquid coefficient of partition (K d ) of about 10 5 L.kg -1 . A significant addition of glucose induces an important dissolution of soil carbonates by the indirect action of microorganisms, but does not significantly favor the 241 Am remobilization. On the other hand, the presence of strong citrate concentrations (≥ 10 -2 M) allows 300 to 10000 time greater re-mobilizations by the complexing of 241 Am released after the dissolution of the carrying phases. Finally, the colloidal transport of 241 Am has been systematically observed in a limited but

  8. Behaviour of I/Br/Cl-THMs and their projected toxicities under simulated cooking conditions: Effects of heating, table salt and residual chlorine

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Mingquan, E-mail: yanmq@pku.edu.cn; Li, Mingyang; Han, Xuze

    2016-08-15

    Highlights: • Additions of KI and KIO{sub 3}-fortified table salt cause I-THMs to increase. • CHCl{sub 2}I is the predominant I-THM formed in the presence of KIO{sub 3}-fortified table salt. • >90% of CHCl{sub 2}I is removed by heating, but concentrations of the other I-THMs increase. • Additions of KI or KIO{sub 3}-fortified salt increase the cytotoxicity due to I-THM formed. • Heating causes cytotoxicity to decrease for KIO{sub 3}-fortified salt but increase for KI. - Abstract: This study examined the effects of heating, residual chlorine and concentration of table salt on the generation of iodine-, bromine- and chlorine-containing trihalomethanes (THMs) under simulated cooking conditions. In the case of addition of either KI- or KIO{sub 3}-fortified salt, total I-THM concentrations increased with increasing iodine concentration, while total Cl/Br-THM concentrations decreased. CHCl{sub 2}I, CHBrClI, CHBrI{sub 2}, CHBr{sub 2}I and CHI{sub 3} were formed in the presence of KI salt, while only CHCl{sub 2}I was formed in the presence of KIO{sub 3} salt. CHCl{sub 2}I was unstable under cooking conditions, and >90% of this DBP was removed during heating, which in some cases increased the concentrations of the other I-THMs. The calculated cytotoxicity increased with addition of KI- or KIO{sub 3}-fortified salt due to the generation of I-THMs, whose impact on the cytotoxicity at room temperature was equal to or five times higher, respectively, than the cytotoxicity of the simultaneously formed Cl/Br-THMs for the cases of salts. Heating decreased the cytotoxicity, except for the case of addition of KI salt, in which the calculated cytotoxicity of I-THMs increased above 150% as the temperature was increased up to 100 °C. The reported results may have important implications for epidemiologic exposure assessments and, ultimately, for public health protection.

  9. Semiconductor quantum optics with tailored photonic nanostructures

    International Nuclear Information System (INIS)

    Laucht, Arne

    2011-01-01

    the understanding of coupling phenomena between excitons in self-assembled quantum dots and optical modes of tailored photonic nanostructures realized on the basis of two-dimensional photonic crystals. While we highlight the potential for advanced applications in the direction of quantum optics and quantum computation, we also identify some of the challenges which will need to be overcome on the way. (orig.)

  10. [Tailored cranioplasty using CAD-CAM technology].

    Science.gov (United States)

    Vitanovics, Dusán; Major, Ottó; Lovas, László; Banczerowski, Péter

    2014-11-30

    The majority of cranial defects are results of surgical intervention. The defect must be covered within resonable period of time usually after 4-6 week given the fact that the replacement of bone improve the brain circulation. Number of surgical techniques and materials are available to perform cranioplasty. Due to favorable properties we chosed ultra high molecular weight polyethylene as material. In this paper the authors show a procedure which allows tailored artificial bone replacement using state of art medical and engineering techniques. between 2004 and 2012, 19 patients were operated on cranial bone defect and a total of 22 3D custom-designed implants were implanted. The average age of patients was 35.4 years. In 12 patients we performed primary cranioplasty, while seven patients had the replacement at least once. Later the implants had to be removed due to infection or other causes (bone necrosis, fracture). All patients had native and bone-windowed 1 mm resolution CT. The 3D design was made using the original CT images and with design program. Computer controlled lathe was used to prepare a precise-fitting model. During surgery, the defect was exposed and the implant was fixed to normal bone using mini titanium plates and screws. All of our patients had control CT at 3, 6 and 12 months after surgery and at the same time neurological examination. Twenty-one polyethylene and one titanium implants were inserted. The average follow-up of the patients was 21.5 months, ranged from two to 96 months. We follow 12 patients (63.15%) more than one year. No intraoperative implant modifications had to be made. Each of the 22 implant exactly matched the bone defect proved by CT scan. No one of our patients reported aesthetic problems and we did not notice any kind of aesthetic complication. We had short term complication in three cases due to cranioplasty, subdural, epidural haemorrhage and skin defect. Polyethylene is in all respects suitable for primary and secondary

  11. Semiconductor quantum optics with tailored photonic nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Laucht, Arne

    2011-06-15

    single photon emission into the waveguide. The results obtained during the course of this thesis contribute significantly to the understanding of coupling phenomena between excitons in self-assembled quantum dots and optical modes of tailored photonic nanostructures realized on the basis of two-dimensional photonic crystals. While we highlight the potential for advanced applications in the direction of quantum optics and quantum computation, we also identify some of the challenges which will need to be overcome on the way. (orig.)

  12. Nuclear graphite waste's behaviour under disposal conditions: Study of the release and repartition of organic and inorganic forms of carbon 14 and tritium in alkaline media

    International Nuclear Information System (INIS)

    Vende, L.

    2012-01-01

    23000 tons of graphite wastes will be generated during dismantling of the first generation of French reactors (9 gas cooled reactors). These wastes are classified as Long Lived Low Level wastes (LLW-LL). As requested by the law, the French National Radioactive Waste Management Agency (Andra) is studying concepts of low-depth disposals.In this work we focus on carbon 14, the main long-lived radionuclide in graphite waste (5730 y), but also on tritium, which is the main contributor to the radioactivity in the short term. Carbon 14 and tritium may be released from graphite waste in many forms in gaseous phase ( 14 CO 2 , HT...) or in solution ( 14 CO 3 2- , HTO...). Their speciation will strongly affect their migration from the disposal site to the environment. Leaching experiments, in alkaline solution (0.1 M NaOH simulating repository conditions) have been performed on irradiated graphite, from Saint-Laurent A2 and G2 reactors, in order to quantify their release and characterize their speciation. The studies show that carbon 14 exists in both gaseous and aqueous phases. In the gaseous phase, release is weak (≤0.1%) and corresponds to oxidizable species. Carbon 14 is mainly released into liquid phase, as both inorganic and organic species. 65% of released fraction is inorganic and 35% organic carbon. Two tritiated species have been identified in gaseous phase: HTO and HT/Organically Bond Tritium. More than 90% of tritium in that phase corresponds to HT/OBT. But release is weak (≤0.1%). HTO is mainly in the liquid phase. (author)

  13. Effect of Loading Transients on the EAC Crack Growth Behaviour of Low-Alloy RPV Steels under Simulated BWR Operating Conditions (CASTOC WP 3, PSI Tests 3 and 4)

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, S.; Seifert, H.-P

    2003-04-01

    Within the CASTOC-project (5{sup t}h EU FW programme), the environmentally-assisted crack (EAC) growth behaviour of low-alloy reactor pressure vessel (RPV) steels is experimentally investigated under simulated transient and steady-state boiling water reactor (BWR) power operation conditions by six European laboratories. The present report is a summary of the third and fourth test of working package (WP) 3 with loading transients, performed at Paul Scherrer Institut (PSI). Two different low-alloy steels (20 MnMoNi 5 5, 0.015 wt.% S and 22 NiMoCr 3 7, 0.007 wt. %S) were investigated in oxygenated high-temperature, high-purity water (T = 240 {sup o}C, DO = 400 ppb) in a daisy chain at two different load ratios (R = 0.8 and 0.2). In the first part of the experiments, asymmetrical saw tooth loading with different rise times {delta}t{sub R} of the load and different loading frequencies were applied. Then the loading conditions were changed to an asymmetrical trapezoid waveform loading (periodical partial unloading, PPU) and the hold time {delta}t{sub H} at maximum load was varied. In the final phase of WP 3 PSI tests 3 and 4 the SCC behaviour was investigated under constant load. With decreasing loading frequency the corrosion fatigue (CF) crack advance per cycle {delta}a/{delta}N{sub EAC} of material A increased. Sustained EAC crack growth could be maintained down to low frequencies of 10{sup -5} Hz. The time-based crack growth rate (CGR) da/dt{sub EAC} decreased with decreasing frequency. In material B no effect of the loading frequency could be resolved. Up to a hold time of 1 h at maximum constant load the CGR da/dt{sub EAC} seemed to be independent of the hold time. Above hold times of 1 h the CGR decreased and dropped down to CGR values in the range or below the BWR VIP 60 SCC disposition lines. This behaviour was observed in both investigated materials. The cycle-based CGR {delta}a/{delta}N{sub EAC} remained approximately constant with increasing hold time. The

  14. A counselor in your pocket: feasibility of mobile health tailored messages to support HIV medication adherence

    Directory of Open Access Journals (Sweden)

    Cook PF

    2015-09-01

    Full Text Available Paul F Cook,1 Jane M Carrington,2 Sarah J Schmiege,1 Whitney Starr,3 Blaine Reeder11University of Colorado College of Nursing, Aurora, CO, USA; 2University of Arizona College of Nursing, Tucson, AZ, USA; 3University of Colorado School of Medicine, Aurora, CO, USAPurpose: Medication adherence is a major challenge in HIV treatment. New mobile technologies such as smartphones facilitate the delivery of brief tailored messages to promote adherence. However, the best approach for tailoring messages is unknown. Persons living with HIV (PLWH might be more receptive to some messages than others based on their current psychological state.Methods: We recruited 37 PLWH from a parent study of motivational states and adherence. Participants completed smartphone-based surveys at a random time every day for 2 weeks, then immediately received intervention or control tailored messages, depending on random assignment. After 2 weeks in the initial condition, participants received the other condition in a crossover design. Intervention messages were tailored to match PLWH’s current psychological state based on five variables – control beliefs, mood, stress, coping, and social support. Control messages were tailored to create a mismatch between message framing and participants’ current psychological state. We evaluated intervention feasibility based on acceptance, ease of use, and usefulness measures. We also used pilot randomized controlled trial methods to test the intervention’s effect on adherence, which was measured using electronic caps that recorded pill-bottle openings.Results: Acceptance was high based on 76% enrollment and 85% satisfaction. Participants found the hardware and software easy to use. However, attrition was high at 59%, and usefulness ratings were slightly lower. The most common complaint was boredom. Unexpectedly, there was no difference between mismatched and matched messages’ effects, but each group showed a 10%–15% improvement

  15. Tailorable thiolated trimethyl chitosans for covalently stabilized nanoparticles.

    Science.gov (United States)

    Verheul, Rolf J; van der Wal, Steffen; Hennink, Wim E

    2010-08-09

    A novel four-step method is presented to synthesize partially thiolated trimethylated chitosan (TMC) with a tailorable degree of quaternization and thiolation. First, chitosan was partially N-carboxylated with glyoxylic acid and sodium borohydride. Next, the remaining amines were quantitatively dimethylated with formaldehyde and sodium borohydride and then quaternized with iodomethane in NMP. Subsequently, these partially carboxylated TMCs dissolved in water were reacted with cystamine at pH 5.5 using EDC as coupling agent. After addition of DTT and dialysis, thiolated TMCs were obtained, varying in degree of quaternization (25-54%) and degree of thiolation (5-7%), as determined with (1)H NMR and Ellman's assay. Gel permeation chromatography with light scattering detection indicated limited intermolecular cross-linking. All thiolated TMCs showed rapid oxidation to yield disulfide cross-linked TMC at pH 7.4, while the thiolated polymers were rather stable at pH 4.0. When Calu-3 cells were used, XTT and LDH cell viability tests showed a slight reduction in cytotoxicity for thiolated TMCs as compared to the nonthiolated polymers with similar DQs. Positively charged nanoparticles loaded with fluorescently labeled ovalbumin were made from thiolated TMCs and thiolated hyaluronic acid. The stability of these particles was confirmed in 0.8 M NaCl, in contrast to particles made from nonthiolated polymers that dissociated under these conditions, demonstrating that the particles were held together by intermolecular disulfide bonds.

  16. eHealth Literacy and Intervention Tailoring Impacts the Acceptability of a HIV/STI Testing Intervention and Sexual Decision Making Among Young Gay and Bisexual Men.

    Science.gov (United States)

    Horvath, Keith J; Bauermeister, José A

    2017-02-01

    We assessed whether young men who have sex with men's acceptability with the online Get Connected! intervention and subsequent sexual health decision making were influenced by their baseline eHealth literacy (high vs. low competency) and intervention tailoring (tailored or nontailored intervention condition). Compared to the high eHealth literacy/tailored intervention group: (1) those in the low eHealth literacy/tailored intervention condition and participants in the nontailored intervention condition (regardless of eHealth literacy score) reported lower intervention information quality scores; and (2) those in the low eHealth literacy/nontailored intervention group reported lower intervention system quality scores and that the intervention had less influence on their sexual health decision making. Future similar intervention research should consider how eHealth literacy might influence participants' abilities to navigate intervention content and integrate it into their sexual decision making.

  17. Evaluating Algorithm Performance Metrics Tailored for Prognostics

    Data.gov (United States)

    National Aeronautics and Space Administration — Prognostics has taken center stage in Condition Based Maintenance (CBM) where it is desired to estimate Remaining Useful Life (RUL) of a system so that remedial...

  18. Can Deterrence Be Tailored? Strategic Forum, Number 225, January 2007

    National Research Council Canada - National Science Library

    Bunn, M. E

    2007-01-01

    .... The Bush administration has outlined a concept for tailored deterrence to address the distinctive challenges posed by advanced military competitors, regional powers armed with weapons of mass destruction (WMD...

  19. Radio-contaminant behaviour in the cover-gas space and the containment building of a sodium-cooled fast reactor in accident conditions

    International Nuclear Information System (INIS)

    Mathe, Emmanuel

    2014-01-01

    experiments chosen in the literature. The mass of oxide aerosols produced by a sodium spray fire can involve more than 60% of the ejected sodium. Then, we develop the numerical simulation STARK based on the Cooper model that model the physico-chemical transformations of the aerosols. However, this model has never been validated and the literature does not permit to do so. In these conditions, we designed and performed our own experiment to obtain the missing values of parameters that govern the Cooper model. The Cooper model has been improved with the results of this experimental study, ESSTIA, and we present a modified Cooper model that improves the accuracy of Cooper model to investigate the transformation of the sodium aerosols. The last part of the manuscript deals with the interaction between sodium aerosols (hydroxide) and a key fission product (iodine). We use density functional theory numerical simulation (the VASP code) to discover the affinities that can be identified. The results will facilitate simulation of the source term evolution because the sodium aerosols will interact with this FP. All the data and numerical simulations presented here will contribute to implementation of models in the future SFR SA numerical simulation of the IRSN, ASTEC-Na. (author)

  20. Tailoring of EIA-649-1: Definition of Major (Class I) Engineering Change Proposal

    Science.gov (United States)

    2015-05-15

    MISSILE SYSTEMS CENTER TAILORING TAILORING OF EIA -649-1: DEFINITION OF MAJOR (CLASS I) ENGINEERING CHANGE PROPOSAL APPROVED FOR...PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED 1 Tailoring of EIA -649-1: Definition of Major (Class I) ECP. 1. Intent of this Tailoring Document...This tailoring document remedies a requirements gap in the industry consensus standard, EIA -649-1: 2015. Specifically, this tailoring provides a

  1. Tailoring of motional states in double-well potentials by time-dependent processes

    International Nuclear Information System (INIS)

    Haerkoenen, Kari; Kaerki, Ollijuhani; Suominen, Kalle-Antti

    2006-01-01

    We show that the vibrational state tailoring method developed for molecular systems can be applied for cold atoms in optical lattices. The original method is based on a three-level model interacting with two strong laser pulses in a counterintuitive sequence [M. Rodriguez et al., Phys. Rev. A 62, 053413 (2000)]. Here we outline the conditions for achieving similar dynamics with single time-dependent potential surfaces. It is shown that guided switching between diabatic and adiabatic evolution has an essential role in this system. We also show that efficient and precise tailoring of motional states in optical lattices can be achieved, for instance, simply by superimposing two lattices and moving them with respect to each other

  2. Interlaboratory research project: behaviour of microorganisms and viruses during drinking water conditioning. Partial project 2: Campylobacter and Yersinia. Final report; Verhalten von Mikroorganismen und Viren bei der Trinkwasseraufbereitung. Teilvorhaben 2: Campylobacter und Yersinia. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Schulze, E.; Feuerpfeil, I.; Vobach, V.

    1997-09-01

    Dysentery, typhus and cholera, diseases which, in Robert Koch`s time, could still be caused by drinking water, have long ceased to be relevant to us. This is safeguarded by modern conditioning methods and the monitoring of drinking water as laid down in the ordinance on drinking water, which is based in hygienic-microbiological regards on the indicator system. The conditions governing the development of the indicator system were the use of water from protected water reservoirs, and its upgrading by means of slow filtration.- But in recent times the situation has changed in so far as it is increasingly necessary to use water reservoirs that are not optimally protected, so that the water must be conditioned with an ever increasing technical effort.- An additionally complicating factor is that new microbiological and molecular-biological verification methods have proved the existence of further pathogens transmitted via water, whose behaviour during drinking water conditioning has hardly been investigated and to which the indicator principle may or may not be applicable. Moreover, some of these micro-organisms are very chlorine-resistent (for instance, permanent forms of parasites) and are inadequately eliminated even by modern conditioning techniques such as ozoning or UV disinfection.- In recent years, increased susceptibility to potentially pathogenous micro-organisms and opportunistic pathogens, which can be linked to water, has also been observed in certain groups of the population (persons treated with immuno-suppressants, allergics, cancer and AIDS patients).- In 1993, the WHO, in its ``Guidelines for Drinking Water Quality``, published a list of potential pathogens in drinking water, with their origin and an assessment of their hygienic importance on the basis of the latest microbiological and epidemiological state of knowledge. Micro-organisms included in this list are strains of Campylobacter and Yersinia. These two have become known mainly as pathogens

  3. Field handling conditions of raw milk sold in vending machines: experimental evaluation of the behaviour of Listeria monocytogenes, Escherichia coli O157:H7, Salmonella Typhimurium and Campylobacter jejuni

    Directory of Open Access Journals (Sweden)

    Renato G. Zanoni

    2012-01-01

    Full Text Available The direct sale by farmers of raw milk for human consumption has been allowed in Italy since 2004. The aim of this study was to evaluate the behaviour of selected foodborne pathogens in raw milk sold in vending machines, in field handling conditions, and during shelf-life from production to consumption. Temperature of storage of raw milk in 33 farms authorized to produce and sell raw milk were investigated from farm to vending machine delivery, together with consumer habits in one province of the Emilia-Romagna region of northern Italy. Failure to maintain appropriate low temperatures during shelf-life was recorded and 43% of consumers did not boil milk before consumption. Listeria monocytogenes, Escherichia coli O157:H7, Salmonella Typhimurium and Campylobacter jejuni strains were inoculated into raw milk samples, and the best (4°C as established by law and worst temperature storage conditions detected (variable temperature were simulated. Boiling tests were performed for each pathogen considered at high and low levels of contamination. Results showed an increase in L. monocytogenes in milk stored at 4°C and at variable temperatures recorded in shelf-life monitoring, an increase in E. coli O157:H7 and S. Typhimurium at variable temperatures but not at 4°C, and a decrease in C. jejuni in all storage conditions. Boiling milk is effective in making it safe for consumers. This study provides evidence that appropriate handling of raw milk, maintaining low temperatures, together with consumer education concerning boiling raw milk before consumption are key factors in preventing foodborne infections linked to raw milk consumption, and helps assess the risk of foodborne infection linked to raw milk consumption.

  4. A real world study on the genetic, cognitive and psychopathological differences of obese patients clustered according to eating behaviours.

    Science.gov (United States)

    Caroleo, Mariarita; Primerano, Amedeo; Rania, Marianna; Aloi, Matteo; Pugliese, Valentina; Magliocco, Fabio; Fazia, Gilda; Filippo, Andrea; Sinopoli, Flora; Ricchio, Marco; Arturi, Franco; Jimenez-Murcia, Susana; Fernandez-Aranda, Fernando; De Fazio, Pasquale; Segura-Garcia, Cristina

    2018-02-01

    Considering that specific genetic profiles, psychopathological conditions and neurobiological systems underlie human behaviours, the phenotypic differentiation of obese patients according to eating behaviours should be investigated. The aim of this study was to classify obese patients according to their eating behaviours and to compare these clusters in regard to psychopathology, personality traits, neurocognitive patterns and genetic profiles. A total of 201 obese outpatients seeking weight reduction treatment underwent a dietetic visit, psychological and psychiatric assessment and genotyping for SCL6A2 polymorphisms. Eating behaviours were clustered through two-step cluster analysis, and these clusters were subsequently compared. Two groups emerged: cluster 1 contained patients with predominantly prandial hyperphagia, social eating, an increased frequency of the long allele of the 5-HTTLPR and low scores in all tests; and cluster 2 included patients with more emotionally related eating behaviours (emotional eating, grazing, binge eating, night eating, post-dinner eating, craving for carbohydrates), dysfunctional personality traits, neurocognitive impairment, affective disorders and increased frequencies of the short (S) allele and the S/S genotype. Aside from binge eating, dysfunctional eating behaviours were useful symptoms to identify two different phenotypes of obese patients from a comprehensive set of parameters (genetic, clinical, personality and neuropsychology) in this sample. Grazing and emotional eating were the most important predictors for classifying obese patients, followed by binge eating. This clustering overcomes the idea that 'binging' is the predominant altered eating behaviour, and could help physicians other than psychiatrists to identify whether an obese patient has an eating disorder. Finally, recognising different types of obesity may not only allow a more comprehensive understanding of this illness, but also make it possible to tailor

  5. Behaviour of aluminum foam under fire conditions

    Directory of Open Access Journals (Sweden)

    J. Grabian

    2008-07-01

    Full Text Available Taking into account fire-protection requirements it is advantageous for aluminum foam, after melting at a temperature considerably exceeding the melting point, to have a structure of discontinuous suspension of solid inclusions to liquid metal instead of liquid consistency. Continuity of the suspension depends on the solid phase content. The boundary value of the phase determined by J. Śleziona, above which the suspension becomes discontinuous, is provided by the formula (1. Figure 1 presents the relationship graphically. Boundary values of the vs content resulting from the above relationship is too low, taking into account the data obtained from the technology of suspension composites [4]. Therefore, based on the structure assumed for the suspension shown in Figure 2 these authors proposed another way of determining the contents, the value of which is determined by the relationship (3 [5].For purposes of the experimental study presented in the paper two foams have been molten: a commercially available one, made by aluminum foaming with titanium hydride, and a foam manufactured in the Marine Materials Plant of the Maritime University of Szczecin by blowing the AlSi7 +20% SiC composite with argon. Macrophotographs of foam cross-sections are shown in Figure 3. The foams have been molten in the atmosphere of air at a temperature of 750ºC. The products of melting are presented in Figure 4. It appears that molten aluminum foam may have no liquid consistency, being unable to flow, which is a desired property from the point of view of fire-protection. The above feature of the molten foam results from the fact that it may be a discontinuous suspension of solid particles in a liquid metal. The suspended particles may be solid particles of the composite that served for making the foam or oxide membranes formed on extended metal surface of the bubbles included in the foam. The desired foam ability to form a discontinuous suspension after melting may be intensified by insertion of solid particles into the metal serving for foam formation.

  6. Child behaviour problems and childhood illness: development of the Eczema Behaviour Checklist.

    Science.gov (United States)

    Mitchell, A E; Morawska, A; Fraser, J A; Sillar, K

    2017-01-01

    Children with atopic dermatitis are at increased risk of both general behaviour problems, and those specific to the condition and its treatment. This can hamper the ability of parents to carry out treatment and manage the condition effectively. To date, there is no published instrument available to assess child behaviour difficulties in the context of atopic dermatitis management. Our aim was to develop a reliable and valid instrument to assess atopic dermatitis-specific child behaviour problems, and parents' self-efficacy (confidence) for managing these behaviours. The Eczema Behaviour Checklist (EBC) was developed as a 25-item questionnaire to measure (i) extent of behaviour problems (EBC Extent scale), and (ii) parents' self-efficacy for managing behaviour problems (EBC Confidence scale), in the context of child atopic dermatitis management. A community-based sample of 292 parents completed the EBC, measures of general behaviour difficulties, self-efficacy with atopic dermatitis management and use of dysfunctional parenting strategies. There was satisfactory internal consistency and construct validity for EBC Extent and Confidence scales. There was a negative correlation between atopic dermatitis-specific behaviour problems and parents' self-efficacy for dealing with behaviours (r = -.53, p behaviours; (ii) symptom-related behaviours; and (iii) behaviours related to impact of the illness. Variation in parents' self-efficacy for managing their child's atopic dermatitis was explained by intensity of illness-specific child behaviour problems and parents' self-efficacy for dealing with the behaviours. The new measure of atopic dermatitis-specific child behaviour problems was a stronger predictor of parents' self-efficacy for managing their child's condition than was the measure of general child behaviour difficulties. Results provide preliminary evidence of reliability and validity of the EBC, which has potential for use in clinical and research settings, and

  7. Tailoring of the Tell-us Card communication tool for nurses to increase patient participation using Intervention Mapping.

    Science.gov (United States)

    van Belle, Elise; Zwakhalen, Sandra M G; Caris, Josien; Van Hecke, Ann; Huisman-de Waal, Getty; Heinen, Maud

    2018-02-01

    To describe the tailoring of the Tell-us Card intervention for enhanced patient participation to the Dutch hospital setting using Intervention Mapping as a systematic approach. Even though patient participation is essential in any patient-to-nurse encounter, care plans often fail to take patients' preferences into account. The Tell-us Card intervention seems promising, but needs to be tailored and tested before implementation in a different setting or on large scale. Description of the Intervention Mapping framework to systematically tailor the Tell-us Card intervention to the Dutch hospital setting. Intervention Mapping consists of: (i) identification of the problem through needs assessment and determination of fit, based on patients and nurses interviews and focus group interviews; (ii) developing a logic model of change and matrices, based on literature and interviews; (iii) selection of theory-based methods and practical applications; (iv) producing programme components and piloting; (v) planning for adoption, implementation and sustainability; and (vi) preparing for programme evaluation. Knowledge, attitude, outcome expectations, self-efficacy and skills were identified as the main determinants influencing the use of the Tell-us Card. Linking identified determinants and performance objectives with behaviour change techniques from the literature resulted in a well-defined and tailored intervention and evaluation plan. The Tell-us Card intervention was adapted to fit the Dutch hospital setting and prepared for evaluation. The Medical Research Council framework was followed, and the Intervention Mapping approach was used to prepare a pilot study to confirm feasibility and relevant outcomes. This article shows how Intervention Mapping is applied within the Medical Research Council framework to adapt the Tell-us Card intervention, which could serve as a guide for the tailoring of similar interventions. © 2017 John Wiley & Sons Ltd.

  8. Tailoring broadband light trapping of GaAs and Si substrates by self-organised nanopatterning

    Energy Technology Data Exchange (ETDEWEB)

    Martella, C.; Chiappe, D.; Mennucci, C.; Buatier de Mongeot, F. [Dipartimento di Fisica, Università di Genova, via Dodecaneso 33, I-16146 Genova (Italy)

    2014-05-21

    We report on the formation of high aspect ratio anisotropic nanopatterns on crystalline GaAs (100) and Si (100) substrates exploiting defocused Ion Beam Sputtering assisted by a sacrificial self-organised Au stencil mask. The tailored optical properties of the substrates are characterised in terms of total reflectivity and haze by means of integrating sphere measurements as a function of the morphological modification at increasing ion fluence. Refractive index grading from sub-wavelength surface features induces polarisation dependent anti-reflection behaviour in the visible-near infrared (VIS-NIR) range, while light scattering at off-specular angles from larger structures leads to very high values of the haze functions in reflection. The results, obtained for an important class of technologically relevant materials, are appealing in view of photovoltaic and photonic applications aiming at photon harvesting in ultrathin crystalline solar cells.

  9. Tailored scenarios for streamflow climate change impacts based on the perturbation of precipitation and evapotranspiration

    Science.gov (United States)

    Ntegeka, Victor; Willems, Patrick; Baguis, Pierre; Roulin, Emmanuel

    2015-04-01

    It is advisable to account for a wide range of uncertainty by including the maximum possible number of climate models and scenarios for future impacts. As this is not always feasible, impact assessments are inevitably performed with a limited set of scenarios. The development of tailored scenarios is a challenge that needs more attention as the number of available climate change simulations grows. Whether these scenarios are representative enough for climate change impacts is a question that needs addressing. This study presents a methodology of constructing tailored scenarios for assessing runoff flows including extreme conditions (peak flows) from an ensemble of future climate change signals of precipitation and potential evapotranspiration (ETo) derived from the climate model simulations. The aim of the tailoring process is to formulate scenarios that can optimally represent the uncertainty spectrum of climate scenarios. These tailored scenarios have the advantage of being few in number as well as having a clear description of the seasonal variation of the climate signals, hence allowing easy interpretation of the implications of future changes. The tailoring process requires an analysis of the hydrological impacts from the likely future change signals from all available climate model simulations in a simplified (computationally less expensive) impact model. Historical precipitation and ETo time series are perturbed with the climate change signals based on a quantile perturbation technique that accounts for the changes in extremes. For precipitation, the change in wetday frequency is taken into account using a markov-chain approach. Resulting hydrological impacts from the perturbed time series are then subdivided into high, mean and low hydrological impacts using a quantile change analysis. From this classification, the corresponding precipitation and ETo change factors are back-tracked on a seasonal basis to determine precipitation-ETo covariation. The

  10. Tailoring quantum structures for active photonic crystals

    DEFF Research Database (Denmark)

    Kuznetsova, Nadezda

    demonstrated various trench profiles along the [0-1-1] and [0-11] crystallographic directions. Selectively grown InGaAs/InP quantum wells (QWs) possessed distinct geometrical and optical properties in the cases of directly grown InGaAs and when an InP buffer was deposited underneath. The fabrication process...... consumption for on-chip and chip-to-chip optical communication. In order to develop metal-organic vapor phase epitaxial selective area etching and growth, a mask was fabricated in the HSQ e-beam resist including optimization of exposure and development conditions. By use of CBr4 as an etchant, in situ etching...

  11. Shape-Tailored Features and their Application to Texture Segmentation

    KAUST Repository

    Khan, Naeemullah

    2014-04-01

    Texture Segmentation is one of the most challenging areas of computer vision. One reason for this difficulty is the huge variety and variability of textures occurring in real world, making it very difficult to quantitatively study textures. One of the key tools used for texture segmentation is local invariant descriptors. Texture consists of textons, the basic building block of textures, that may vary by small nuisances like illumination variation, deformations, and noise. Local invariant descriptors are robust to these nuisances making them beneficial for texture segmentation. However, grouping dense descriptors directly for segmentation presents a problem: existing descriptors aggregate data from neighborhoods that may contain different textured regions, making descriptors from these neighborhoods difficult to group, leading to significant errors in segmentation. This work addresses this issue by proposing dense local descriptors, called Shape-Tailored Features, which are tailored to an arbitrarily shaped region, aggregating data only within the region of interest. Since the segmentation, i.e., the regions, are not known a-priori, we propose a joint problem for Shape-Tailored Features and the regions. We present a framework based on variational methods. Extensive experiments on a new large texture dataset, which we introduce, show that the joint approach with Shape-Tailored Features leads to better segmentations over the non-joint non Shape-Tailored approach, and the method out-performs existing state-of-the-art.

  12. Investigation of the long-term behaviour of residues of brown coal upgrading processes in an underground deposit in the geogenic conditions of potassium and rock salt mining. Text volume. Final report

    International Nuclear Information System (INIS)

    1994-01-01

    Residues of brown coal upgrading processes are problematic substances that require extensive monitoring. In East Germany, these residues were usually stored above ground in abandoned open pits and industrial waste dumps. In the Land of Thuringia, the most urgent poblems are posed by the ''Neue Sorge'' abandoned open pit near Rositz and the Rusendorf industrial waste dump. In both cases, large volumes of highly polluted waste materials must be disposed of. The method of choice recommended for disposal is the combustion in a hazardous-waste incinerator in accordance with the specifications of the Waste Management Technical Guide (TA Abfall). Preliminary studies are currently being made for the construction of a waste incinerating plant in this region. An alternative option for disposal would be underground storage in an abandoned salt mine. Thuringia has a number of abandoned potassium mines that appear to be well suited for this purpose. On the other hand, there have been no systematic investigations so far on the long-term behaviour of hazardous waste under the geogenic conditions of potassium and rock salt mining, so that further studies will be necessary. (orig.)

  13. Tailoring Wet Explosion Process Parameters for the Pretreatment of Cocksfoot Grass for High Sugar Yields

    DEFF Research Database (Denmark)

    Njoku, Stephen Ikechukwu; Ahring, Birgitte Kiær; Uellendahl, Hinrich

    2013-01-01

    The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response...... glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher...... when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars....

  14. Behaviour of radiocaesium in coastal rivers of the Fukushima Prefecture (Japan) during conditions of low flow and low turbidity--Insight on the possible role of small particles and detrital organic compounds.

    Science.gov (United States)

    Eyrolle-Boyer, Frédérique; Boyer, Patrick; Garcia-Sanchez, Laurent; Métivier, Jean-Michel; Onda, Yuichi; De Vismes, Anne; Cagnat, Xavier; Boulet, Béatrice; Cossonnet, Catherine

    2016-01-01

    To investigate riverine transfers from contaminated soils of the Fukushima Prefecture in Japan to the marine environment, suspended sediments, filtered water, sediments and detrital organic macro debris deposited onto river beds were collected in November 2013 within small coastal rivers during conditions of low flow rates and low turbidity. River waters were directly filtered on the field and high efficiency well-type Ge detectors were used to analyse radiocaesium concentrations in very small quantities of suspended particles and filtered water (a few mg to a few g). For such base-flow conditions, our results show that the watersheds studied present similar hydro-sedimentary behaviours at their outlets and that the exports of dissolved and particulate radiocaesium are comparable. Moreover, the contribution of these rivers to the instantaneous export of radiocaesium to the ocean is similar to that of the Abukuma River. Our preliminary results indicate that, in the estuaries, radiocaesium concentrations in suspended sediments would be reduced by more than 80%, while radiocaesium concentration in filtered waters would be maintained. Significant correlations between radiocaesium concentrations and radiocaesium inventories in the soils of the catchments indicate that there was at that time little intra and inter-watershed variability in the transfer processes of radiocaesium from lands to rivers at this regional scale. The apparent liquid-solid partition coefficient (KD) values acquired for the lowest loads/finest particles complement the values acquired by using sediment traps and highlight the strong capacity of the smallest particles to transfer radiocaesium. Finally, but not least, our observations suggest that there could be a significant transfer of highly contaminated detrital biomass from forest litter to the downstream rivers in a rather conservative way. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Risk Assessment tailored to cryogenics - LINDE approach

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The following Risk Assessment Tools will be presented: **HAZID – Hazard Identification Study** Application: if the process contains new applications or provides new challenges (e.g. plant location) Purpose: Identify hazards such as fire/explosion, toxic impact, occupational hazards etc. and assess adequate preventive / mitigation measures **HAZOP – Hazard and Operability Study** Application: for all Projects Purpose: Detailed review of design reflected in the PID to ensure that adequate safeguards are available for all possible process upsets or maloperations. **HAZAN – Hazard Analysis** Application: for all PFHE (plate-fin heat exchangers), CWHE (coil wound heat exchangers) and straight tube sheet heat exchangers Purpose: detailed analysis of the impact of process upset conditions and start-up / shut down scenarios on the lifetime of the heat exchangers – including definition of additional safeguards, if required. **TQR – Technology Qualification Review** Application: for applications...

  16. Building Tailorable Hypermedia Systems: The embedded-interpreter approach

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Malhotra, Jawahar

    1994-01-01

    This paper discusses an approach for developing dynamically tailorable hypermedia systems in an object-oriented environment. The approach is aimed at making applications developed in compiled languages like Beta and C++ tailorable at run-time. The approach is based on use of: 1) a hypermedia...... application framework (DEVISE Hyper-media), and 2) an embeddable interpreter for the framework language. A specific hypermedia system is instantiated from the framework with the interpreter embedded in the executable. The specific hypermedia system has a number of “open points” which can be filled via......-type. The paper describes the framework and illustrates how the interpreter is integrated. It describes steps involved in tailoring a specific hypermedia system with a new drawing media-type, where graphical objects can be endpoints for links. Since the hypermedia framework uses a persistent object...

  17. Ligand-tailored single-site silica supported titanium catalysts: Synthesis, characterization and towards cyanosilylation reaction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Wei; Li, Yani; Yu, Bo; Yang, Jindou; Zhang, Ying; Chen, Xi; Zhang, Guofang, E-mail: gfzhang@snnu.edu.cn; Gao, Ziwei, E-mail: zwgao@snnu.edu.cn

    2015-01-15

    A successive anchoring of Ti(NMe{sub 2}){sub 4}, cyclopentadiene and a O-donor ligand, 1-hydroxyethylbenzene (PEA), 1,1′-bi-2-naphthol (Binol) or 2,3-dihydroxybutanedioic acid diethyl ester (Tartrate), on silica was conducted by SOMC strategy in moderate conditions. The silica, monitored by in-situ Fourier transform infrared spectroscopy (in-situ FT-IR), was pretreated at different temperatures (200, 500 and 800 °C). The ligand tailored silica-supported titanium complexes were characterized by in-situ FT-IR, {sup 13}C CP MAS-NMR, X-ray photoelectron spectroscopy (XPS), X-ray absorption near edge structure (XANES) and elemental analysis in detail, verifying that the surface titanium species are single sited. The catalytic activity of the ligand tailored single-site silica supported titanium complexes was evaluated by a cyanosilylation of benzaldehyde. The results showed that the catalytic activity is dependent strongly on the dehydroxylation temperatures of silica and the configuration of the ligands. - Graphical abstract: The ligand-tailored silica supported “single site” titanium complexes were synthesized by SOMC strategy and fully characterized. Their catalytic activity were evaluated by benzaldehyde silylcyanation. - Highlights: • Single-site silica supported Ti active species was prepared by SOMC technique. • O-donor ligand tailored Ti surface species was synthesized. • The surface species was characterized by XPS, {sup 13}C CP-MAS NMR, XANES etc. • Catalytic activity of the Ti active species in silylcyanation reaction was evaluated.

  18. Tailoring reablement: A grounded theory study of establishing reablement in a community setting in Norway.

    Science.gov (United States)

    Moe, Cathrine; Brinchmann, Berit Støre

    2018-01-01

    Reablement is an interprofessional, home-based rehabilitation service that aims to enable senior residents to cope with everyday life and to prevent functional impairments. Systematic accounts of what practitioners actually do when establishing reablement are lacking. This study aims to generate a grounded theory of practitioners' patterns of action when establishing reablement. The study is located in Norway, and grounded theory is the methodological approach. Data were collected from January 2014 to August 2016 through participant observations, focus group interviews and individual interviews. Informants are municipal healthcare employees in different organisational areas associated with the process of establishing reablement services (managers of conventional home care and representatives from the administration and service-provider offices). Altogether, 17 individuals are interviewed. The empirical data are analysed several times using open, selective and theoretical coding. The grounded theory, "tailoring reablement," includes three phases-replicating, adapting and establishing-and the strategies of collaborating, developing knowledge, habituating and filtering. The theory of tailoring reablement also includes the impact of the contextual factors. The study seeks to bridge the gap between research and practice. The theory of tailoring reablement emerges from an inductive approach and theorises participants' actions. The theory focuses on the phases from innovation to implementation. Establishing a new service model in a complex welfare setting requires a wide range of actors and agencies. Tailoring reablement also requires flexibility and professional autonomy. It is important to create terms and conditions for this within a stringent health and care service. The insights of this study have implications for practice development of reablement and can fit other public sector fields. © 2017 The Authors. Health and Social Care in the Community Published by John

  19. Sexual behaviour in cattle

    International Nuclear Information System (INIS)

    King, G.J.

    1990-01-01

    Short duration or weak expression of oestrus are frequently cited as major reasons for poor results when artificial insemination of Bos indicus breeds is attempted. The existing literature on sexual behaviour certainly indicates that oestrus sometimes lasts for only a few hours in Bos indicus, but similar patterns are also reported in Bos taurus animals. The period of sexual receptivity in suckled Hereford or Hereford-dairy cross-breds maintained in small, totally confined groups ranged from 1 to 18 h, with a mean of 4.4 h and a median of 3.5 h. In totally confined Holstein cows the onset of the LH surge always followed the beginning of homosexual activity by 1 or 2 h even when the period of receptivity was very short. Thus, the beginning rather than the end of oestrus should be used for estimating ovulation time. The expression of sexual behaviour is modified by many factors, including environmental conditions, the number of peri-oestrous females in the group and the presence of observers. In Hereford beef, Holstein dairy and probably all other cattle breeds, the variability in duration and intensity of oestrous activity is very large, so generalizations on a typical individual behavioural pattern are not possible. (author). 39 refs, 1 fig., 2 tabs

  20. Molecular tailoring of interfaces for thin film on substrate systems

    Science.gov (United States)

    Grady, Martha Elizabeth

    to use more conventional interfacial fracture testing techniques. Self-assembled monolayers (SAMs) provide an enabling platform for molecular tailoring of the chemical and physical properties of an interface in an on-demand fashion. The SAM end-group functionality is systematically varied and the corresponding effect on interfacial adhesion between a transfer printed gold (Au) film and a fused silica substrate is measured. SAMs with four different end groups are investigated: methyl, amine, bromine and thiol. In addition to these four end groups, mixed monolayers of increasing molar ratio of thiol to methyl SAMs in solution are investigated. There is a strong dependence of interfacial chemistry on the adhesion strength of Au films. In addition to the chemical functionality of the SAM, surface roughness of the underlying substrate also has a significant impact on the interfacial strength. Thin films of mechanochemically active polymer are subjected to laser-generated, high amplitude acoustic pulses. Stress wave propagation through the film produces large amplitude stresses (>100 MPa) in short time frames (10-20 ns), leading to very high strain-rates (ca. 107-108 s -1). The polymer system, spiropyran (SP)- linked polystyrene (PS), undergoes a force-induced chemical reaction causing fluorescence and color change. Activation of SP is evident via a fluorescence signal in thin films subject to high strain-rates. In contrast, quasi-static loading of bulk SP-linked PS samples failed to result in SP activation. Mechanoresponsive coatings have potential to indicate deformation under shockwave loading conditions. In addition to SP-linked polymer films, the activation of spiropyran interfacial molecules with different side groups is characterized as they adsorb onto a SAM platform with preferential amine terminating chemistry. The reactivity of SP monolayers due to UV irradiation is evaluated by water contact angle goniometry and fluorescence spectroscopy. Side groups on the

  1. Optimizing Tailored Communications for Health Risk Assessment: A Randomized Factorial Experiment of the Effects of Expectancy Priming, Autonomy Support, and Exemplification

    Science.gov (United States)

    Ribisl, Kurt M; Mayer, Deborah K; Tate, Deborah F

    2018-01-01

    Background Health risk assessments with tailored feedback plus health education have been shown to be effective for promoting health behavior change. However, there is limited evidence to guide the development and delivery of online automated tailored feedback. Objective The goal of this study was to optimize tailored feedback messages for an online health risk assessment to promote enhanced user engagement, self-efficacy, and behavioral intentions for engaging in healthy behaviors. We examined the effects of three theory-based message factors used in developing tailored feedback messages on levels of engagement, self-efficacy, and behavioral intentions. Methods We conducted a randomized factorial experiment to test three different components of tailored feedback messages: tailored expectancy priming, autonomy support, and use of an exemplar. Individuals (N=1945) were recruited via Amazon Mechanical Turk and randomly assigned to one of eight different experimental conditions within one of four behavioral assessment and feedback modules (tobacco use, physical activity [PA], eating habits, and weight). Participants reported self-efficacy and behavioral intentions pre- and postcompletion of an online health behavior assessment with tailored feedback. Engagement and message perceptions were assessed at follow-up. Results For the tobacco module, there was a significant main effect of the exemplar factor (P=.04); participants who received exemplar messages (mean 3.31, SE 0.060) rated their self-efficacy to quit tobacco higher than those who did not receive exemplar messages (mean 3.14, SE 0.057). There was a three-way interaction between the effect of message conditions on self-efficacy to quit tobacco (P=.02), such that messages with tailored priming and an exemplar had the greatest impact on self-efficacy to quit tobacco. Across PA, eating habits, and weight modules, there was a three-way interaction among conditions on self-efficacy (P=.048). The highest self

  2. Behaviour of radiocaesium in coastal rivers of the Fukushima Prefecture (Japan) during conditions of low flow and low turbidity – Insight on the possible role of small particles and detrital organic compounds

    International Nuclear Information System (INIS)

    Eyrolle-Boyer, Frédérique; Boyer, Patrick; Garcia-Sanchez, Laurent; Métivier, Jean-Michel; Onda, Yuichi; De Vismes, Anne; Cagnat, Xavier; Boulet, Béatrice; Cossonnet, Catherine

    2016-01-01

    To investigate riverine transfers from contaminated soils of the Fukushima Prefecture in Japan to the marine environment, suspended sediments, filtered water, sediments and detrital organic macro debris deposited onto river beds were collected in November 2013 within small coastal rivers during conditions of low flow rates and low turbidity. River waters were directly filtered on the field and high efficiency well-type Ge detectors were used to analyse radiocaesium concentrations in very small quantities of suspended particles and filtered water (a few mg to a few g). For such base-flow conditions, our results show that the watersheds studied present similar hydro-sedimentary behaviours at their outlets and that the exports of dissolved and particulate radiocaesium are comparable. Moreover, the contribution of these rivers to the instantaneous export of radiocaesium to the ocean is similar to that of the Abukuma River. Our preliminary results indicate that, in the estuaries, radiocaesium concentrations in suspended sediments would be reduced by more than 80%, while radiocaesium concentration in filtered waters would be maintained. Significant correlations between radiocaesium concentrations and radiocaesium inventories in the soils of the catchments indicate that there was at that time little intra and inter-watershed variability in the transfer processes of radiocaesium from lands to rivers at this regional scale. The apparent liquid–solid partition coefficient (K_D) values acquired for the lowest loads/finest particles complement the values acquired by using sediment traps and highlight the strong capacity of the smallest particles to transfer radiocaesium. Finally, but not least, our observations suggest that there could be a significant transfer of highly contaminated detrital biomass from forest litter to the downstream rivers in a rather conservative way. - Highlights: • Radiocesium concentrations were assessed by using high performance well-type Ge

  3. Behavioural motivations and abilities in broilers

    OpenAIRE

    Bokkers, E.A.M.

    2004-01-01

    Broilers are chickens kept commercially under intensive husbandry conditions for poultry meat production. They grow to a slaughterweight of approximately 2.2 kg in 6 weeks. Broilers show a pronounced decrease in behavioural activity during their short life. The aim of this thesis was to gain more insight into the influence of both motivation and ability on behavioural activity in broilers. The distinction between motivation and ability is relevant for the interpretation of behavioural activit...

  4. Protocol for the development and validation of a questionnaire to assess concerning behaviours and mental health in individuals with autism spectrum disorders: the Assessment of Concerning Behaviour (ACB) scale.

    Science.gov (United States)

    Santosh, Paramala; Tarver, Joanne; Gibbons, Felicity; Vitoratou, Silia; Simonoff, Emily

    2016-03-22

    Co-occurring psychiatric conditions and concerning behaviours are prevalent in individuals with autism spectrum disorders (ASD), and are likely to be detrimental to functioning and long-term outcomes. The cognitive rigidity and deficits in emotional literacy and verbal behaviour that commonly occur in ASD can adversely affect clinicians' confidence to identify concerning behaviours and mental health problems. There is a need to develop a measure that is tailored towards individuals with ASD, and differentiates between symptoms of psychopathology and core ASD symptoms. Furthermore, it should be modified to capture internalising symptoms that individuals with ASD may find difficult or be unable to verbalise. This protocol describes the intended development and validation of the Assessment of Concerning Behaviour (ACB) scale. The ACB will aim to be a multidimensional measure of concerning behaviours in ASD incorporating self-report, parent/carer, teacher/employer and clinician report versions that can be used across the lifespan and spectrum of intellectual ability. This study will be guided by the methods described in the US Food and Drug Administration Guidance for Industry Patient-reported Outcome Measures. A literature review, cognitive interviews and focus groups with individuals who have experience of working or living with ASDs will be used for item generation. A sample of children and adults with ASD will complete the ACB, in addition to other gold standard measures of concerning behaviour in order to establish the initial psychometric properties of the scale. This study has received ethical approval from the NHS Research Ethics Committee: London-Camden and King's Cross (ref: 15/LO/0085). Study findings will be disseminated to healthcare professionals and scientists in the field through publication in peer-reviewed journals and conference presentations. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a

  5. Tailoring dietary approaches for weight loss.

    Science.gov (United States)

    Gardner, C D

    2012-07-01

    Although the 'Low-Fat' diet was the predominant public health recommendation for weight loss and weight control for the past several decades, the obesity epidemic continued to grow during this time period. An alternative 'low-carbohydrate' (Low-Carb) approach, although originally dismissed and even vilified, was comparatively tested in a series of studies over the past decade, and has been found in general to be as effective, if not more, as the Low-Fat approach for weight loss and for several related metabolic health measures. From a glass half full perspective, this suggests that there is more than one choice for a dietary approach to lose weight, and that Low-Fat and Low-Carb diets may be equally effective. From a glass half empty perspective, the average amount of weight lost on either of these two dietary approaches under the conditions studied, particularly when followed beyond 1 year, has been modest at best and negligible at worst, suggesting that the two approaches may be equally ineffective. One could resign themselves at this point to focusing on calories and energy intake restriction, regardless of macronutrient distributions. However, before throwing out the half-glass of water, it is worthwhile to consider that focusing on average results may mask important subgroup successes and failures. In all weight-loss studies, without exception, the range of individual differences in weight change within any particular diet groups is orders of magnitude greater than the average group differences between diet groups. Several studies have now reported that adults with greater insulin resistance are more successful with weight loss on a lower-carbohydrate diet compared with a lower-fat diet, whereas adults with greater insulin sensitivity are equally or more successful with weight loss on a lower-fat diet compared with a lower-carbohydrate diet. Other preliminary findings suggest that there may be some promise with matching individuals with certain genotypes to

  6. Further development of landfill sealing systems. Subproject 20: long-term behaviour of earthen layers in landfill liners, moisture conditions under the action of temperature; Weiterentwicklung von Deponieabdichtungssystemen. Teilvorhaben 20: Langzeitverhalten von Erdstoffschichten in Deponiebasisabdichtungen, Feuchtehaushalt unter Temperatureinwirkung

    Energy Technology Data Exchange (ETDEWEB)

    Holzloehner, U.; Schossig, W.; Wuttke, W.; Ziegler, F.

    1996-12-31

    The sealing properties of the earthen layers in landfill liners depend on water content, which is not constant but changes according to the moisture conditions of the landfill and the adjacent soil. Earthen layers in landfill liners tend to lose water over the course of time and this may result in desiccation cracking. To study the behaviour of soils undergoing desiccation, test devices and methods were developed to evaluate the water transport characteristics of soil samples. Measurement of the temporal and spatial changes in moisture distribution within the cylindrical soil sample was accompanied by a calculation in which diffusion coefficients were iteratively varied so as to reach optimum agreement with the observed moisture distribution. Overburden pressure can to some extent prevent desiccation. Therefore test devices were developed which made it possible to load soil samples simultaneously by vertical stress and by suction. (orig./SR) [Deutsch] Die Dichtigkeit von Erdstoffschichten in Deponieabdichtungen haengt vom Wassergehalt ab, der nicht konstant ist, sondern sich entsprechend dem Feuchtehaushalt von Deponie und umgebendem Boden aendert. Die Erdstoffabdichtungssschichten tendieren langfristig zum Trocknerwerden, wodurch es zu Rissen kommen kann. Um das Austrocknungsverhalten zu untersuchen, wurden Versuchsgeraete und -verfahren zur Bestimmung von Wassertransportkennwerten an Bodenproben entwickelt. Die Messung der zeitlichen und oertlichen Aenderung der Feuchteverteilung in der zylindrischen Bodenprobe wurde durch eine Rechnung begleitet, in der die eingegebenen Diffusionskoeffizienten iterativ variiert wurden, bis optimale Uebereinstimmung mit der gemessenen Feuchteverteilung erreicht war. Auflast kann Austrocknung bis zu einem gewissen Grad verhindern. Deshalb wurden Geraete entwickelt, in denen Bodenproben gleichzeitig einer Wasserspannung und einer vertikalen Spannung ausgesetzt werden koennen. (orig./SR)

  7. Microstructural gradients in thin hard coatings -- tailor-made

    DEFF Research Database (Denmark)

    Pantleon, Karen; Oettel, Heinrich

    1998-01-01

    ) alternating sputtering with and without substrate voltage and (c) pulsed bias voltage. On the basis of X-ray diffraction measurements, it is demonstrated that residual stress gradients and texture gradients can be designed tailor-made. Furthermore, results of microhardness measurements and scratch tests...

  8. Tailorable Trimethyl chitosans as adjuvant for intranasal immunization

    NARCIS (Netherlands)

    Verheul, R.J.

    2010-01-01

    Tailorable Trimethyl Chitosans as Adjuvant for Intranasal Immunization Active vaccination has proven to be the most (cost) effective tool in the fight against infectious diseases. Nowadays, most vaccines are administered via parenteral injection. However, the risk of contaminated needles and need

  9. Enabling Tailored Music Programs in Elementary Schools: An Australian Exemplar

    Science.gov (United States)

    McFerran, Katrina Skewes; Crooke, Alexander Hew Dale

    2014-01-01

    Participation in meaningful school music programs is the right of all children. Although music education is widely supported by policy, significant gaps exist in practice in most developed Western countries. These gaps mean the extrinsic and intrinsic benefits associated with participation in tailored programs are not equally available to all…

  10. Tailored Cloze: Improved with Classical Item Analysis Techniques.

    Science.gov (United States)

    Brown, James Dean

    1988-01-01

    The reliability and validity of a cloze procedure used as an English-as-a-second-language (ESL) test in China were improved by applying traditional item analysis and selection techniques. The 'best' test items were chosen on the basis of item facility and discrimination indices, and were administered as a 'tailored cloze.' 29 references listed.…

  11. Comparing tailored and untailored text messages for smoking cessation

    DEFF Research Database (Denmark)

    Skov-Ettrup, L S; Ringgaard, L W; Dalum, P

    2014-01-01

    The aim was to compare the effectiveness of untailored text messages for smoking cessation to tailored text messages delivered at a higher frequency. From February 2007 to August 2009, 2030 users of an internet-based smoking cessation program with optional text message support aged 15-25 years were...... of text messages increases quit rates among young smokers....

  12. Tailoring Dispersion properties of photonic crystal waveguides by topology optimization

    DEFF Research Database (Denmark)

    Stainko, Roman; Sigmund, Ole

    2007-01-01

    based design updates. The goal of the optimization process is to come up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. Two examples concerning reproduction of a specific dispersion...

  13. Promotion of Active Aging using a tailored recommendation system

    NARCIS (Netherlands)

    Cabrita, M.; Vollenbroek-Hutten, Miriam Marie Rosé

    Active Aging deals with the support and integration of the elderly population in a society focusing on improving physical and mental well-being. Persuasive technology provides solutions for tailored interventions aiming at maintaining an active lifestyle. The present paper introduces the initial

  14. Understanding the impact of graphene sheet tailoring on the ...

    Indian Academy of Sciences (India)

    Tailoring the channel decreases mobility and transmission probability to a great ... AGNR was used throughout the text so N denotes the number of dimer lines. Figure 2. .... ber of dimer lines and z is a positive integer) and through local density ...

  15. Application-Tailored I/O with Streamline

    NARCIS (Netherlands)

    de Bruijn, W.J.; Bos, H.J.; Bal, H.E.

    2011-01-01

    Streamline is a stream-based OS communication subsystem that spans from peripheral hardware to userspace processes. It improves performance of I/O-bound applications (such as webservers and streaming media applications) by constructing tailor-made I/O paths through the operating system for each

  16. Analysis, design and elastic tailoring of composite rotor blades

    Science.gov (United States)

    Rehfield, Lawrence W.; Atilgan, Ali R.

    1987-01-01

    The development of structural models for composite rotor blades is summarized. The models are intended for use in design analysis for the purpose of exploring the potential of elastic tailoring. The research was performed at the Center for Rotary Wing Aircraft Technology.

  17. Tailor-made blanks for the aircraft industry

    NARCIS (Netherlands)

    Zad Poor, A.A.

    2010-01-01

    Tailor-Made Blanks (TMBs) are hybrid assemblies made of sheet metals with different materials and/or thicknesses that are joined together prior to forming. Alternatively, a monolithic sheet can be machined to create required thickness variations (machined TMBs). The possibility of having several

  18. Tailoring Small IT Projects in the Project Planning Phase

    Science.gov (United States)

    Mulhearn, Michael F.

    2011-01-01

    Project management (PM) and systems engineering (SE) are essential skills in information technology (IT). There is an abundance of information available detailing the comprehensive bodies of knowledge, standards, and best practices. Despite the volume of information, there is surprisingly little information about how to tailor PM and SE tasks for…

  19. Aerodynamic tailoring of the Learjet Model 60 wing

    Science.gov (United States)

    Chandrasekharan, Reuben M.; Hawke, Veronica M.; Hinson, Michael L.; Kennelly, Robert A., Jr.; Madson, Michael D.

    1993-01-01

    The wing of the Learjet Model 60 was tailored for improved aerodynamic characteristics using the TRANAIR transonic full-potential computational fluid dynamics (CFD) code. A root leading edge glove and wing tip fairing were shaped to reduce shock strength, improve cruise drag and extend the buffet limit. The aerodynamic design was validated by wind tunnel test and flight test data.

  20. LPWA using supersonic gas jet with tailored density profile

    Science.gov (United States)

    Kononenko, O.; Bohlen, S.; Dale, J.; D'Arcy, R.; Dinter, M.; Erbe, J. H.; Indorf, G.; di Lucchio, L.; Goldberg, L.; Gruse, J. N.; Karstensen, S.; Libov, V.; Ludwig, K.; Martinez de La Ossa, A.; Marutzky, F.; Niroula, A.; Osterhoff, J.; Quast, M.; Schaper, L.; Schwinkendorf, J.-P.; Streeter, M.; Tauscher, G.; Weichert, S.; Palmer, C.; Horbatiuk, Taras

    2016-10-01

    Laser driven plasma wakefield accelerators have been explored as a potential compact, reproducible source of relativistic electron bunches, utilising an electric field of many GV/m. Control over injection of electrons into the wakefield is of crucial importance in producing stable, mono-energetic electron bunches. Density tailoring of the target, to control the acceleration process, can also be used to improve the quality of the bunch. By using gas jets to provide tailored targets it is possible to provide good access for plasma diagnostics while also producing sharp density gradients for density down-ramp injection. OpenFOAM hydrodynamic simulations were used to investigate the possibility of producing tailored density targets in a supersonic gas jet. Particle-in-cell simulations of the resulting density profiles modelled the effect of the tailored density on the properties of the accelerated electron bunch. Here, we present the simulation results together with preliminary experimental measurements of electron and x-ray properties from LPWA experiments using gas jet targets and a 25 TW, 25 fs Ti:Sa laser system at DESY.