WorldWideScience

Sample records for behaviors additional research

  1. HIV behavioral research online.

    Science.gov (United States)

    Chiasson, Mary Ann; Parsons, Jeffrey T; Tesoriero, James M; Carballo-Dieguez, Alex; Hirshfield, Sabina; Remien, Robert H

    2006-01-01

    Internet access has caused a global revolution in the way people of all ages and genders interact. Many have turned to the Internet to seek love, companionship, and sex, prompting researchers to move behavioral studies online. The sexual behavior of men who have sex with men (MSM) has been more closely studied than that of any other group online given the abundance of gay-oriented websites and concerns about increasing transmission of HIV and other sexually transmitted infections. Not only does the Internet provide a new medium for the conduct of behavioral research and for participant recruitment into an array of research studies, it has the as yet unrealized potential to reach huge numbers of MSM with innovative harm reduction and prevention messages tailored to individualized needs, interests, and risk behavior. Internet-based research on sexual behavior has many advantages in rapidity of recruitment of diverse samples which include individuals unreachable through conventional methods (i.e., non-gay identified and geographically and socially isolated MSM, etc.). Internet-based research also presents some new methodologic challenges in study design, participant recruitment, survey implementation, and interpretation of results. In addition, there are ethical issues unique to online research including difficulties in verifying informed consent, obstacles to surveying minors, and the ability to assure anonymity. This paper presents a review of Internet-based research on sexual behavior in MSM, a general discussion of the methodologic and ethical challenges of Internet-based research, and recommendations for future interdisciplinary research.

  2. Consumer Behavior Research Methods

    DEFF Research Database (Denmark)

    Chrysochou, Polymeros

    2017-01-01

    This chapter starts by distinguishing consumer behavior research methods based on the type of data used, being either secondary or primary. Most consumer behavior research studies phenomena that require researchers to enter the field and collect data on their own, and therefore the chapter...... emphasizes the discussion of primary research methods. Based on the nature of the data primary research methods are further distinguished into qualitative and quantitative. The chapter describes the most important and popular qualitative and quantitative methods. It concludes with an overall evaluation...... of the methods and how to improve quality in consumer behavior research methods....

  3. Consumer behavior research

    OpenAIRE

    Hašková, Lucie

    2010-01-01

    The major part of this work is a consumer behavior research in process of buying christmas presents. The goal of this work is to describe a consumer behavior of Prague's customers in process of buying christmas presents, also describe a a consumer behavior of different age and social groups, as well as the difference between men and women.

  4. Reporting unethical research behavior.

    Science.gov (United States)

    Wenger, N S; Korenman, S G; Berk, R; Liu, H

    1999-10-01

    Scientists, as professionals, have a responsibility to self-regulate. However, whistleblowing is rare. We investigated scientists' infrequent disclosure of unethical behavior by studying their responses to scenarios describing unethical research acts and compared their responses to those of research administrators. A cross-sectional survey was administered to National Science Foundation-funded principal investigators and their institutions' representatives (IRs) to the Office of Research Integrity. Both scientists and IRs proposed to respond to nearly all research behaviors that they rated as unethical. Scientists more often proposed responses limited to the research team (58% vs. 25% of cases, p unethical behavior were not. Scientists appear to perceive that they uphold their responsibility to respond to unethical behavior by disclosures within the research team, whereas administrators propose to report to externally accountable individuals, raising the question of whether scientists' behavior constitutes professional self-regulation or cover up.

  5. Consumer Behavior Research

    Directory of Open Access Journals (Sweden)

    Kaveh Peighambari

    2016-04-01

    Full Text Available This article analyzes 12 years of recent scholarly research on consumer behavior published in the five leading international journals in this field. Analyzing academic contributions to a specific area of research provides valuable insights into how it has evolved over a defined period. The approach was to briefly discuss content analysis and its application in scholarly literature review studies. The methodology used here involves the classification of topics to evaluate key trends in consumer behavior literature. It includes a ranking of topics published, typology of the published articles, the research classification in terms of methodologies, and analysis techniques. The most cited articles in the field and within each journal are also examined. The comprehensive literature review of consumer behavior research undertaken in this article could advance the discipline of consumer behavior research by elucidating the evolution of consumer behavior literature in the studied period.

  6. Collaborative Research and Behavioral Management

    DEFF Research Database (Denmark)

    Schapiro, Steve; Brosnan, Sarah F.; Hopkins, William D

    2017-01-01

    The behavioral management of captive nonhuman primates (NHPs) can be significantly enhanced through synergistic relationships with noninvasive research projects. Many behavioral and cognitive research procedures are challenging and enriching (physically, cognitively, and/or socially......) for the animals (Hopper et al. 2016; Hopkins and Latzman 2017) without involving any invasive (surgical, biopsy, etc.) procedures. Noninvasive behavioral research programs present the primates with opportunities to choose to voluntarily participate (or not), providing them with greater control over...

  7. Characterization of the Tribological Behavior of Graphene-Based Additives

    Energy Technology Data Exchange (ETDEWEB)

    Erck, Robert

    2014-09-01

    XG-supplied nanocrystalline additives were extensively tested for friction and wear behavior. A technique for investigating the stability of additives was developed, and a report covered filtration and centrifugation methods for settling and filterable content. Friction and wear trends in partially and fully formulated oils were reported. Particle size analysis was performed and reported.

  8. Behaviors of Polymer Additives Under EHL and Influences of Interactions Between Additives on Friction Modification

    Science.gov (United States)

    Sakurai, T.

    1984-01-01

    Polymer additives have become requisite for the formulation of multigrade engine oils. The behavior of polymethacrylate (PMA)-thickened oils as lubricants in concentrated contacts under nominal rolling and pure sliding conditions was investigated by conventional optical interferometry. The PMA thickened oils behaved differently from the base oil in the formation of elastohydrodynamic (EHL) films. The higher the elastohydrodynamic molecular weight of the PMA contained in the lubricant, the thinner was the oil film under EHL conditions. The film thickness of shear-degraded PMA-thickened oils was also investigated. The behavior of graphite particles dispersed in both the base oil and the PMA-thickened oil was studied under pure sliding by taking photomicrographs. Many kinds of additives are contained in lubricating oil and the interactions between additives are considered. The interactions of zinc-organodithiophosphates (ZDP) with other additives is discussed.

  9. How research in behavioral pharmacology informs behavioral science.

    Science.gov (United States)

    Branch, Marc N

    2006-05-01

    Behavioral pharmacology is a maturing science that has made significant contributions to the study of drug effects on behavior, especially in the domain of drug-behavior interactions. Less appreciated is that research in behavioral pharmacology can have, and has had, implications for the experimental analysis of behavior, especially its conceptualizations and theory. In this article, I outline three general strategies in behavioral pharmacology research that have been employed to increase understanding of behavioral processes. Examples are provided of the general characteristics of the strategies and of implications of previous research for behavior theory. Behavior analysis will advance as its theories are challenged.

  10. Interfacial behavior of common food contact polymer additives.

    Science.gov (United States)

    Heiserman, W M; Can, S Z; Walker, R A; Begley, T H; Limm, W

    2007-07-15

    Irganox 1076 (IN1076) and Irganox 1010 (IN1010), phenol containing species often used as antioxidant additives in food packaging polymers have both hydrophilic and hydrophobic functional groups. Consequently these additives are likely to absorb to surfaces where their free energy is minimized. Experiments described in this work examine the two-dimensional phase behavior and vibrational structure of IN1076 and IN1010 films adsorbed to the air/water interface. Surface pressure isotherms show that repeated compression of these films leads to continued irreversible loss of molecules and that on a per molecule basis, this loss is more pronounced for IN1076 than for IN1010. Differences in the surface properties of these two antioxidant additives are interpreted based on differences in molecular structure. Surface specific vibrational measurements of these organic films show very little conformational order, implying that even when closely packed, both antioxidant species have little affinity for forming highly organized domains. These findings have important ramifications for mechanisms that reduce antioxidant activity in polymers as well as descriptions of antioxidant blooming on polymer surfaces.

  11. Some guidelines for conducting research in applied behavioral pharmacology.

    Science.gov (United States)

    van Haaren, Frans; Weeden, Marc

    2013-01-01

    The Journal of Applied Behavior Analysis (JABA) has published a number of articles on the behavioral effects of psychomotor stimulant drugs in individuals with attention deficit hyperactivity disorder. Some additional JABA publications have included investigations of the behavioral effects of other drugs. However, a review of these articles revealed many methodological differences among studies, which makes it difficult to evaluate the relative contribution of each research effort to the overall database. In this context, we offer some guidelines to solidify the methodological rigor of behavior pharmacological research published in JABA. © Society for the Experimental Analysis of Behavior.

  12. Behavioral Research Data Analysis with R

    CERN Document Server

    Li, Yuelin

    2012-01-01

    This book is written for behavioral scientists who want to consider adding R to their existing set of statistical tools, or want to switch to R as their main computation tool. The authors aim primarily to help practitioners of behavioral research make the transition to R. The focus is to provide practical advice on some of the widely-used statistical methods in behavioral research, using a set of notes and annotated examples. This book will also help beginners learn more about statistics and behavioral research. These are statistical techniques used by psychologists who do research on human su

  13. Modeling and Analyzing Academic Researcher Behavior

    Directory of Open Access Journals (Sweden)

    Phuc Huu Nguyen

    2016-12-01

    Full Text Available Abstract. This paper suggests a theoretical framework for analyzing the mechanism of the behavior of academic researchers whose interests are tangled and vary widely in academic factors (the intrinsic satisfaction in conducting research, the improvement in individual research ability, etc. or non-academic factors (career rewards, financial rewards, etc.. Furthermore, each researcher also has his/her different academic stances in their preferences about academic freedom and academic entrepreneurship. Understanding the behavior of academic researchers will contribute to nurture young researchers, to improve the standard of research and education as well as to boost collaboration in academia-industry. In particular, as open innovation is increasingly in need of the involvement of university researchers, to establish a successful approach to entice researchers into enterprises’ research, companies must comprehend the behavior of university researchers who have multiple complex motivations. The paper explores academic researchers' behaviors through optimizing their utility functions, i.e. the satisfaction obtained by their research outputs. This paper characterizes these outputs as the results of researchers' 3C: Competence (the ability to implement the research, Commitment (the effort to do the research, and Contribution (finding meaning in the research. Most of the previous research utilized the empirical methods to study researcher's motivation. Without adopting economic theory into the analysis, the past literature could not offer a deeper understanding of researcher's behavior. Our contribution is important both conceptually and practically because it provides the first theoretical framework to study the mechanism of researcher's behavior. Keywords: Academia-Industry, researcher behavior, ulrich model’s 3C.

  14. Escalation research: Providing new frontiers for applying behavior analysis to organizational behavior

    Science.gov (United States)

    Goltz, Sonia M.

    2000-01-01

    Decision fiascoes such as escalation of commitment, the tendency of decision makers to “throw good money after bad,” can have serious consequences for organizations and are therefore of great interest in applied research. This paper discusses the use of behavior analysis in organizational behavior research on escalation. Among the most significant aspects of behavior-analytic research on escalation is that it has indicated that both the patterns of outcomes that decision makers have experienced for past decisions and the patterns of responses that they make are critical for understanding escalation. This research has also stimulated the refinement of methods by researchers to better assess decision making and the role reinforcement plays in it. Finally, behavior-analytic escalation research has not only indicated the utility of reinforcement principles for predicting more complex human behavior but has also suggested some additional areas for future exploration of decision making using behavior analysis. PMID:22478347

  15. Research Dilemmas with Behavioral Big Data.

    Science.gov (United States)

    Shmueli, Galit

    2017-06-01

    Behavioral big data (BBD) refers to very large and rich multidimensional data sets on human and social behaviors, actions, and interactions, which have become available to companies, governments, and researchers. A growing number of researchers in social science and management fields acquire and analyze BBD for the purpose of extracting knowledge and scientific discoveries. However, the relationships between the researcher, data, subjects, and research questions differ in the BBD context compared to traditional behavioral data. Behavioral researchers using BBD face not only methodological and technical challenges but also ethical and moral dilemmas. In this article, we discuss several dilemmas, challenges, and trade-offs related to acquiring and analyzing BBD for causal behavioral research.

  16. Behavior, Experience and Expression: Some Research Considerations.

    Science.gov (United States)

    Romanyshyn, Robert D.

    Utilizing research conducted on nostalgia, this paper shows how a phenomenological approach assists in understanding behavior, experience and expression. Moreover, a clearer understanding of them aids one's research with and comprehension of nostalgia. Human action can be studied from the experiential, behavioral and expressive perspectives. These…

  17. Role of samarium additions on the shape memory behavior of iron based alloys

    International Nuclear Information System (INIS)

    Shakoor, R.A.; Khalid, F. Ahmad; Kang, Kisuk

    2011-01-01

    Research highlights: → The effect of samarium contents on shape memory behavior has been studied. → Addition of samarium increases the strength, c/a ratio and ε (hcp martensite). → Addition of samarium retards the nucleation of α (bcc martensite). → Improvement in shape memory effect with the increase in samarium contents. - Abstract: The effect of samarium contents on shape memory behavior of iron based shape memory alloys has been studied. It is found that the strength of the alloys increases with the increase in samarium contents. This effect can be attributed to the solid solution strengthening of austenite by samarium addition. It is also noticed that the shape memory effect increases with the increase in samarium contents. This improvement in shape memory effect presumably can be regarded as the effect of improvement in strength, increase in c/a ratio and obstruction of nucleation of α in the microstructure.

  18. Novel strategies for sedentary behavior research.

    Science.gov (United States)

    Rosenberg, Dori E; Lee, I-Min; Young, Deborah Rohm; Prohaska, Thomas R; Owen, Neville; Buchner, David M

    2015-06-01

    This article reports on the "Novel Strategies for Sedentary Behavior Research" session of the Sedentary Behavior: Identifying Research Priorities workshop. The purpose of this session of the workshop were to propose strategies for accomplishing a research agenda in dealing with sedentary behavior and to consider research priorities for people at high risk for excess sedentary behavior. The four major recommendations from this workshop were as follows: 1) To add repeated objective measures of physical activity and sedentary behavior to existing cohort studies and standardize approaches to measurement and analysis. Epidemiologic studies will be the most efficient design for addressing some research questions. 2) To increase research efficiency, consider the advantages of a network of connected research studies and health systems. Advantages include access to existing data in electronic health records. 3) To carefully select a variety of high-risk study populations and preplan collaboration among studies in intervention research. This strategy can efficiently address the breadth of issues in sedentary behavior research. 4) To include comparative effectiveness designs and pure environmental interventions in intervention research. This strategy facilitates and enhances translation of interventions into practice.

  19. Mechanical Behavior of Additively Manufactured Uranium-6 wt. pct. Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Wu, A. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wraith, M. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Burke, S. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hamza, A. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brown, D. W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Clausen, B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hsiung, L. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McKeown, J. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lindvall, R. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sedillo, E. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Teslich, N. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Torres, S. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Urabe, D. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Freeman, D. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alexander, P. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Iniguez, M. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ryerson, F. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ancheta, D. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lotscher, J. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Young, E. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Evans, C. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Florando, J. N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gallegos, G. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Margraff, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hrousis, C. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Campbell, G. H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-09-15

    This report describes an effort to process uranium-6 weight% niobium using laser powder bed fusion. The chemistry, crystallography, microstructure and mechanical response resulting from this process are discussed with particular emphasis on the effect of the laser powder bed fusion process on impurities. In an effort to achieve homogenization and uniform mechanical behavior from different builds, as well as to induce a more conventional loading response, we explore post-processing heat treatments on this complex alloy. Elevated temperature heat treatment for recrystallization is evaluated and the effect of recrystallization on mechanical behavior in laser powder bed fusion processed U-6Nb is discussed. Wrought-like mechanical behavior and grain sizes are achieved through post-processing and are reported herein.

  20. Future directions of multiple behavior change research.

    Science.gov (United States)

    Geller, Karly; Lippke, Sonia; Nigg, Claudio R

    2017-02-01

    Non-communicable diseases (i.e., chronic diseases including cardiovascular disease, cancer, chronic respiratory disease, diabetes and obesity) result in 36 million deaths each year. Individuals' habitual participation in a single health-risk behaviors substantially contribute to morbidity and mortality (e.g., tobacco use, daily fast food intake, etc.); however, more concerning is the impact of typically co-occurring or clustering of multiple health-risk behaviors. This burden can be minimized through successful cessation of health-risk behaviors and adoption of healthy behaviors; namely healthy lifestyle adoption or multiple health behavior change (MHBC). MHBC is a developing field and future research recommendations are provided to advance MHBC research. A valid measure of MHBC (i.e., lifestyle) is warranted to provide the needed basis for MHBC investigations and evaluations. MHBC is thought to occur through shared co-variation of underlying motivating mechanisms, but how these relationships influence behavior remains unclear. A better understanding of the relationship between behaviors and the related motivating mechanisms (and potential cross-relationship of influences) is needed. Future research should also aim to improve lifestyles through understanding how to change multiple health behaviors. Finally, MHBC research should target the development of sustainable interventions which result in lasting effects (e.g., capacity, systems, policy and environmental changes), with dissemination considered during development. Focusing MHBC research in these areas will increase our understanding and maximize the impact on the health of populations.

  1. Behavioral Methods in Consciousness Research

    DEFF Research Database (Denmark)

    that the research literature has expanded greatly, particularly in cognitive neuroscience and cognitive science. Interestingly, this scientific work has made use of a wide variety of different methods without much consensus on how one might in fact measure subjective consciousness. This situation makes...

  2. Chinese Road Safety and Driver Behavior Research

    OpenAIRE

    Wang, Junhua

    2015-01-01

    The seminar will begin with a brief overview of the Chinese road safety situation, including current safety problems, and then move on to discuss safety research including driver behavior, freeway operational safety, and infrastructure development.

  3. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Brice, Craig, E-mail: craig.a.brice@lmco.com [NASA Langley Research Center, Hampton, VA 23681 (United States); Shenoy, Ravi [Northrop Grumman Corporation Technical Services, Hampton, VA 23681 (United States); Kral, Milo; Buchannan, Karl [University of Canterbury, Christchurch (New Zealand)

    2015-11-11

    Additive manufacturing (AM) is an emerging technology capable of producing near net shape structures in a variety of materials directly from a computer model. Standard metallic alloys that were developed for cast or wrought processing have largely been adopted for AM feedstock. In many applications, these legacy alloys are quite acceptable. In the aluminum alloy family, however, there is a significant performance gap between the casting alloys currently being used in AM processes and the high strength/toughness capability available in certain wrought alloys. The precipitation hardenable alloys, most often used in high performance structures, present challenges for processing by AM. The near net shape nature of AM processes does not allow for mechanical work prior to the heat treatment that is often necessary to develop a uniform distribution of precipitates and give peak mechanical performance. This paper examines the aluminum (Al) alloy 2139, a composition that is strengthened by homogeneous precipitation of Ω (Al{sub 2}Cu) plates and thus ideally suited for near net shape processes like AM. Transmission electron microscopy, microhardness, and tensile testing determined that, with proper processing conditions, Al 2139 can be additively manufactured and subsequently heat treated to strength levels comparable to those of peak aged wrought Al 2139.

  4. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing

    International Nuclear Information System (INIS)

    Brice, Craig; Shenoy, Ravi; Kral, Milo; Buchannan, Karl

    2015-01-01

    Additive manufacturing (AM) is an emerging technology capable of producing near net shape structures in a variety of materials directly from a computer model. Standard metallic alloys that were developed for cast or wrought processing have largely been adopted for AM feedstock. In many applications, these legacy alloys are quite acceptable. In the aluminum alloy family, however, there is a significant performance gap between the casting alloys currently being used in AM processes and the high strength/toughness capability available in certain wrought alloys. The precipitation hardenable alloys, most often used in high performance structures, present challenges for processing by AM. The near net shape nature of AM processes does not allow for mechanical work prior to the heat treatment that is often necessary to develop a uniform distribution of precipitates and give peak mechanical performance. This paper examines the aluminum (Al) alloy 2139, a composition that is strengthened by homogeneous precipitation of Ω (Al_2Cu) plates and thus ideally suited for near net shape processes like AM. Transmission electron microscopy, microhardness, and tensile testing determined that, with proper processing conditions, Al 2139 can be additively manufactured and subsequently heat treated to strength levels comparable to those of peak aged wrought Al 2139.

  5. Methodologies and Methods for User Behavioral Research.

    Science.gov (United States)

    Wang, Peiling

    1999-01-01

    Discusses methodological issues in empirical studies of information-related behavior in six specific research areas: information needs and uses; information seeking; relevance judgment; online searching (including online public access catalog, online database, and the Web); human-system interactions; and reference transactions. (Contains 191…

  6. Forecast for Artificial Muscle Tremor Behavior Based on Dynamic Additional Grey Catastrophe Prediction

    Directory of Open Access Journals (Sweden)

    Yu Fu

    2018-02-01

    Full Text Available Recently, bio-inspired artificial muscles based on ionic polymers have shown a bright perspective in engineering and medical research, but the inherent tremor behavior can cause instability of output response. In this paper, dynamic additional grey catastrophe prediction (DAGCP is proposed to forecast the occurrence time of tremor behavior, providing adequate preparation time for the suppression of the chitosan-based artificial muscles. DAGCP constructs various dimensions of time subsequence models under different starting points based on the threshold of tremor occurrence times and peak-to-peak values in unit time. Next, the appropriate subsequence is selected according to grey correlation degree and prediction accuracy, then it is updated with the newly generated values to achieve a real-time forecast of forthcoming tremor time. Compared with conventional grey catastrophe prediction (GCP, the proposed method has the following advantages: (1 the degradation of prediction accuracy caused by the immobilization of original parameters is prevented; (2 the dynamic input, real-time update and gradual forecast of time sequence are incorporated into the model. The experiment results show that the novel DAGCP can predict forthcoming tremor time earlier and more accurately than the conventional GCP. The generation mechanism of tremor behavior is illustrated as well.

  7. Research opportunities in human behavior and performance

    Science.gov (United States)

    Christensen, J. M. (Editor); Talbot, J. M. (Editor)

    1985-01-01

    Extant information on the subject of psychological aspects of manned space flight are reviewed; NASA's psychology research program is examined; significant gaps in knowledge are identified; and suggestions are offered for future research program planning. Issues of human behavior and performance related to the United States space station, to the space shuttle program, and to both near and long term problems of a generic nature in applicable disciplines of psychology are considered. Topics covered include: (1) human performance requirements for a 90 day mission; (2) human perceptual, cognitive, and motor capabilities and limitations in space; (3) crew composition, individual competencies, crew competencies, selection criteria, and special training; (4) environmental factors influencing behavior; (5) psychosocial aspects of multiperson space crews in long term missions; (6) career determinants in NASA; (7) investigational methodology and equipment; and (8) psychological support.

  8. STORY AND HISTORY IN FETAL BEHAVIOR RESEARCH.

    Science.gov (United States)

    Brakke, Karen

    2015-09-01

    In their monograph, DiPietro, Costigan, and Voegtline present an important and thoughtful portrait of low-risk fetal development during the last trimester of gestation, and they also pay tribute to the Fels Longitudinal Study investigators' early work in this area. In this commentary, the history and legacy of the Fels Institute is further explored within the broader context of fetal research, and DiPietro et al.'s findings are placed in alignment with contemporary dynamic systems' theoretical approaches that emphasize longitudinal analysis of emergent behavior and process during early development. The commentary puts forth the assertion that the work reported by DiPietro and her colleagues tells a story that sets the stage for a new generation of technology-enhanced and culturally expanded investigations of fetal behavior. © 2015 The Society for Research in Child Development, Inc.

  9. Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials

    NARCIS (Netherlands)

    Hedayati, R.; Hosseini-Toudeshky, H; Sadighi, M.; Mohammadi-Aghdam, M; Zadpoor, A.A.

    2016-01-01

    The mechanical behavior of additively manufactured porous biomaterials has recently received increasing attention. While there is a relatively large body of data available on the static mechanical properties of such biomaterials, their fatigue behavior is not yet well-understood. That is partly

  10. Corrosion behaviors of ceramics against liquid sodium. Sodium corrosion characteristics of sintering additives

    International Nuclear Information System (INIS)

    Tachi, Yoshiaki; Kano, Shigeki; Hirakawa, Yasushi; Yoshida, Eiichi

    1998-01-01

    It has been progressed as the Frontier Materials Research to research and develop ceramics to apply for several components of fast breeder reactor using liquid sodium as coolant instead of metallic materials. Grain boundary of ceramics has peculiar properties compared with matrix because most of ceramics are produced by hardening and firing their raw powders. Some previous researchers indicated that ceramics were mainly corroded at grain boundaries by liquid sodium, and ceramics could not be used under corrosive environment. Thus, it is the most important for the usage of ceramics in liquid sodium to improve corrosion resistance of grain boundaries. In order to develop the advanced ceramics having good sodium corrosion resistance among fine ceramics, which have recently been progressed in quality and characteristics remarkably, sodium corrosion behaviors of typical sintering additives such as MgO, Y 2 O 3 and AlN etc. have been examined and evaluated. As a result, the followings have been clarified and some useful knowledge about developing advanced ceramics having good corrosion resistance against liquid sodium has been obtained. (1) Sodium corrosion behavior of MgO depended on Si content. Samples containing large amount of Si were corroded severely by liquid sodium, whereas others with low Si contents showed good corrosion resistance. (2) Both Y 2 O 3 and AlN, which contained little Si, showed good sodium corrosion resistance. (3) MgO, Y 2 O 3 and AlN are thought to be corroded by liquid sodium, if they contain some SiO 2 . Therefore, in order to improve sodium corrosion resistance, it is very important for these ceramics to prevent the contamination of matrix with SiO 2 through purity control of their raw powders. (author)

  11. Campus Grids: Bringing Additional Computational Resources to HEP Researchers

    International Nuclear Information System (INIS)

    Weitzel, Derek; Fraser, Dan; Bockelman, Brian; Swanson, David

    2012-01-01

    It is common at research institutions to maintain multiple clusters that represent different owners or generations of hardware, or that fulfill different needs and policies. Many of these clusters are consistently under utilized while researchers on campus could greatly benefit from these unused capabilities. By leveraging principles from the Open Science Grid it is now possible to utilize these resources by forming a lightweight campus grid. The campus grids framework enables jobs that are submitted to one cluster to overflow, when necessary, to other clusters within the campus using whatever authentication mechanisms are available on campus. This framework is currently being used on several campuses to run HEP and other science jobs. Further, the framework has in some cases been expanded beyond the campus boundary by bridging campus grids into a regional grid, and can even be used to integrate resources from a national cyberinfrastructure such as the Open Science Grid. This paper will highlight 18 months of operational experiences creating campus grids in the US, and the different campus configurations that have successfully utilized the campus grid infrastructure.

  12. Qualitative research in travel behavior studies

    Energy Technology Data Exchange (ETDEWEB)

    Mars Aicart, M.L.; Ruiz Sanchez, T.; Arroyo Lopez, M.R.

    2016-07-01

    Qualitative methodology is extensively used in a wide range of scientific areas, such as Sociology and Psychology, and it is been used to study individual and household decision making processes. However, in the Transportation Planning and Engineering domain it is still infrequent to find in the travel behavior literature studies using qualitative techniques to explore activity-travel decisions. The aim of this paper is first, to provide an overview of the types of qualitative techniques available and to explore how to correctly implement them. Secondly, to highlight the special characteristics of qualitative methods that make them appropriate to study activity-travel decision processes. Far from been an unempirical or intuitive methodology, using qualitative methods properly implies a strong foundation on theoretical frameworks, a careful design of data collection and a deep data analysis. For such a purpose, a review of the scarce activity-travel behavior literature using qualitative methods, or a combination of qualitative and quantitative approaches, is presented. The use of qualitative techniques can play a role of being a supplementary way of obtaining information related to activity-travel decisions which otherwise it would be extremely difficult to find. This work ends with some conclusions about how qualitative research could help in making progress on activity-travel behavior studies. (Author)

  13. Treatment-resistant depression in adolescents: is the addition of cognitive behavioral therapy of benefit?

    Directory of Open Access Journals (Sweden)

    Hetrick SE

    2011-08-01

    Full Text Available Sarah E Hetrick1, Georgina R Cox1, Sally N Merry21Orygen Youth Health Research Centre, Centre for Youth Mental Health, Melbourne, Parkville, Victoria, Australia; 2Werry Centre for Child and Adolescent Mental Health, Department of Psychological Medicine, The University of Auckland, Auckland, New ZealandBackground: Many young people with major depression fail first-line treatments. Treatment resistant depression has various definitions in the literature but typically assumes nonresponse to medication. In young people, cognitive behavioral therapy (CBT is the recommended firstline intervention, thus the definition of treatment resistance should be expanded. Therefore, our aim was to synthesize the existing evidence of any interventions for treatment-resistant depression, broadly defined, in children and adolescents and to investigate the effectiveness of CBT in this context. Methods: We used Cochrane Collaboration methodology, with electronic searches of Medline, PsycINFO, Embase, and the Cochrane Depression Anxiety and Neurosis Group trials registers. Only randomized controlled trials were included, and were assessed for risk of bias. Meta-analysis was undertaken where possible and appropriate.Results: Of 953 articles retrieved, four trials were eligible for inclusion. For one study, only the trial registration document was available, because the study was never completed. All other studies were well conducted with a low risk of bias, although one study had a high dropout rate. Two studies assessed the effect of adding CBT to medication. While an assertive trial of antidepressants does appear to lead to benefit, when compared with placebo, there was no significant advantage, in either study, or in a meta-analysis of data from these trials, that clearly demonstrated an additional benefit of CBT. The third trial showed little advantage of a tricyclic antidepressant over placebo in the context of an inpatient admission. Conclusion: Few randomized

  14. Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review.

    Science.gov (United States)

    Zhang, Xiang-Yu; Fang, Gang; Zhou, Jie

    2017-01-10

    Additive manufacturing (AM), nowadays commonly known as 3D printing, is a revolutionary materials processing technology, particularly suitable for the production of low-volume parts with high shape complexities and often with multiple functions. As such, it holds great promise for the fabrication of patient-specific implants. In recent years, remarkable progress has been made in implementing AM in the bio-fabrication field. This paper presents an overview on the state-of-the-art AM technology for bone tissue engineering (BTE) scaffolds, with a particular focus on the AM scaffolds made of metallic biomaterials. It starts with a brief description of architecture design strategies to meet the biological and mechanical property requirements of scaffolds. Then, it summarizes the working principles, advantages and limitations of each of AM methods suitable for creating porous structures and manufacturing scaffolds from powdered materials. It elaborates on the finite-element (FE) analysis applied to predict the mechanical behavior of AM scaffolds, as well as the effect of the architectural design of porous structure on its mechanical properties. The review ends up with the authors' view on the current challenges and further research directions.

  15. Research Models in Developmental Behavioral Toxicology.

    Science.gov (United States)

    Dietrich, Kim N.; Pearson, Douglas T.

    Developmental models currently used by child behavioral toxicologists and teratologists are inadequate to address current issues in these fields. Both child behavioral teratology and toxicology scientifically study the impact of exposure to toxic agents on behavior development: teratology focuses on prenatal exposure and postnatal behavior…

  16. The effect of inorganic additives to calcium phosphate on in vitro behavior of osteoblasts and osteoclasts

    NARCIS (Netherlands)

    Yang, Liang; Perez-Amodio, Soledad; Barrère, F.; Everts, Vincent; van Blitterswijk, Clemens; Habibovic, Pamela

    2010-01-01

    This study describes a medium-throughput system based on deposition of calcium phosphate films in multi-well tissue culture plates that can be used to study the effect of inorganic additives on the behavior of osteoblasts and osteoclasts in a standardized manner. All tested elements, copper, zinc,

  17. The effects of inorganic additives to calcium phosphate on in vitro behavior of osteoblasts and osteoclasts

    NARCIS (Netherlands)

    Yang, L.; Perez-Amodio, S.; Barrere-de Groot, F.Y.F.; Everts, V.; van Blitterswijk, C.A.; Habibovic, P.

    2010-01-01

    This study describes a medium-throughput system based on deposition of calcium phosphate films in multi-well tissue culture plates that can be used to study the effect of inorganic additives on the behavior of osteoblasts and osteoclasts in a standardized manner. All tested elements, copper, zinc,

  18. Sociocultural Behavior Influence Modelling & Assessment: Current Work and Research Frontiers.

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, Michael Lewis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-01

    A common problem associated with the effort to better assess potential behaviors of various individuals within different countries is the shear difficulty in comprehending the dynamic nature of populations, particularly over time and considering feedback effects. This paper discusses a theory-based analytical capability designed to enable analysts to better assess the influence of events on individuals interacting within a country or region. These events can include changes in policy, man-made or natural disasters, migration, war, or other changes in environmental/economic conditions. In addition, this paper describes potential extensions of this type of research to enable more timely and accurate assessments.

  19. The Additive Benefit of Hypnosis and Cognitive-Behavioral Therapy in Treating Acute Stress Disorder

    Science.gov (United States)

    Bryant, Richard A.; Moulds, Michelle L.; Guthrie, Rachel M.; Nixon, Reginald D. V.

    2005-01-01

    This research represents the first controlled treatment study of hypnosis and cognitive- behavioral therapy (CBT) of acute stress disorder (ASD). Civilian trauma survivors (N = 87) who met criteria for ASD were randomly allocated to 6 sessions of CBT, CBT combined with hypnosis (CBT-hypnosis), or supportive counseling (SC). CBT comprised exposure,…

  20. Rheological behavior study of a clay-polymer mixture: effects of the polymer addition

    International Nuclear Information System (INIS)

    Benchabane, A.

    2006-11-01

    The aim of the present work is to establish a bibliographical synthesis on the microstructure, the colloidal and rheological characterization of bentonite suspensions with and without polymer/surfactant addition; to lead to a rheological characterization of clay-additive mixtures and to understand the interaction between the clay particles and polymer/surfactants. Different experimental measurements: rheology, particle sizing, and x-ray diffraction were used to study the rheological character of the water-bentonite-anionic additive mixtures (CMC, SDS, xanthane) as well as the nature of the particle-particle interactions and particle-additive. The modeling part led to the adoption of Tiu and Boger's model to predict the thixotropy of the bentonite suspensions without additive. Thus, a new model is proposed with physical parameters for a better correlation of the rheological behavior of the various studied mixtures. (author)

  1. Effect of pairwise additivity on finite-temperature behavior of classical ideal gas

    Science.gov (United States)

    Shekaari, Ashkan; Jafari, Mahmoud

    2018-05-01

    Finite-temperature molecular dynamics simulations have been applied to inquire into the effect of pairwise additivity on the behavior of classical ideal gas within the temperature range of T = 250-4000 K via applying a variety of pair potentials and then examining the temperature dependence of a number of thermodynamical properties. Examining the compressibility factor reveals the most deviation from ideal-gas behavior for the Lennard-Jones system mainly due to the presence of both the attractive and repulsive terms. The systems with either attractive or repulsive intermolecular potentials are found to present no resemblance to real gases, but the most similarity to the ideal one as temperature rises.

  2. Effect of additional brief counselling after periodic health examination on motivation for health behavior change [corrected].

    Science.gov (United States)

    Son, Ki Young; Lee, Cheol Min; Cho, BeLong; Lym, Youl Lee; Oh, Seung Won; Chung, Wonjoo; Lee, Jin-Seok; Park, DuShin; Kim, Han Suk

    2012-11-01

    This study was to evaluate the effect of additional brief counseling by a primary care physician on lifestyle modification of examinees after a periodic health examination. 1,000 participants of the 2007 Korean national health screening program were asked to note any variation in their health behavior after participating in the screening program. The degree of comprehensive motivation for lifestyle modification was assessed in terms of stages of health behavior change. We calculated odds ratio of positive change (enhanced stage of change) with multiple logistic regression analysis and age-adjusted proportion of positive changers. Of 989 respondents, 486 and 503 received the basic and additional programs, respectively. Additional group were more likely to be positive changer than basic group (adjusted OR 1.78; 95% CI 1.19-2.65), and this was more prominent in older age group (adjusted OR 2.38, 95% CI 1.23-4.58). The age-adjusted proportions of positive changers were 22.7% (95% CI, 17.9-28.3) and 36.2% (95% CI, 30.4-42.4) in the basic and additional groups, respectively (P behavior change after the health examination. Thus, such a consultation should be considered when designing a health-screening program.

  3. Comparison of oxytetracycline degradation behavior in pig manure with different antibiotic addition methods.

    Science.gov (United States)

    Wang, Yan; Chen, Guixiu; Liang, Juanboo; Zou, Yongde; Wen, Xin; Liao, Xindi; Wu, Yinbao

    2015-12-01

    Using manure collected from swine fed with diet containing antibiotics and antibiotic-free swine manure spiked with antibiotics are the two common methods of studying the degradation behavior of veterinary antibiotic in manure in the environment. However, few studies had been conducted to co-compare these two different antibiotic addition methods. This study used oxytetracycline (OTC) as a model antibiotic to study antibiotic degradation behavior in manure under the above two OTC addition methods. In addition, the role of microorganisms present in the manure on degradation behavior was also examined. The results showed that degradation half-life of OTC in manure from swine fed OTC (9.04 days) was significantly shorter than that of the manure directly treated with OTC (9.65 days). Concentration of 4-epi-OTC in manure from swine fed OTC peaked earlier than that in manure spiked with OTC, and the degradation rates of 4-epi-OTC and α-apo-OTC in the manure from swine fed OTC were faster, but the peak concentrations were lower, than those in manure spiked with OTC. Bacterial diversity and relative abundance of Bacillus cereus data demonstrated that sterilization of the manure before experiment significantly decreased OTC degradation rate in both of the addition methods. Results of the present study demonstrated that the presence of the metabolites (especially 4-epi-OTC) and microorganisms had significant influence on OTC degradation.

  4. Effect of small additions of niobium on the welding behavior of an austenitic stainless steel

    International Nuclear Information System (INIS)

    Moorhead, A.J.; Sikka, V.K.; Reed, R.W.

    1977-01-01

    To systematically study the effect of niobium on the behavior of Type 304 stainless steel, a low-niobium commercial heat was remelted with varying niobium additions - up to 1000 ppM. A standardized weldability test, the Spot Varestraint, was used to compare the propensity of various heats for hot cracking. The fusion and heat-affected zone cracking behavior of the experimental heats was similar to that of a heat of commercial Type 304, and much superior to that of a commercial heat of Type 347 stainless steel. The superior resistance to fusion zone cracking was attributed to the presence of a small amount of delta ferrite in the microstructure of the weld nugget in the experimental materials. The outstanding heat-affected zone cracking behavior was at least partly attributable to backfilling of grain boundary separations in the experimental heats, as well as in the commercial Type 304

  5. Contributions of Socialization Theory to Consumer Behavior Research

    Science.gov (United States)

    Ward, Scott

    1978-01-01

    Socialization theory can contribute to consumer research because it focuses on (1) youth and development, (2) interaction of factors affecting consumer behavior, and (3) linkages between mental processes and overt behavior. Various approaches to socialization research and consumer research are described, including cognitive development and…

  6. The effect of Y2O3 addition on thermal shock behavior of magnesium aluminate spinel

    Directory of Open Access Journals (Sweden)

    Pošarac Milica

    2009-01-01

    Full Text Available The effect of yttria additive on the thermal shock behavior of magnesium aluminate spinel has been investigated. As a starting material we used spinel (MgAl2O4 obtained by the modified glycine nitrate procedure (MGNP. Sintered products were characterized in terms of phase analysis, densities, thermal shock, monitoring the damaged surface area in the refractory specimen during thermal shock and ultrasonic determination of the Dynamic Young modulus of elasticity. It was found that a new phase between yttria and alumina is formed, which improved thermal shock properties of the spinel refractories. Also densification of samples is enhanced by yttria addition.

  7. Mechanical Behavior of Additive Manufactured Layered Materials, Part 2: Stainless Steels

    Science.gov (United States)

    2015-04-30

    materials. Elsevier, Oxford; 2007: 416 -420. [19] Deng, D., Chen, R., Sun, Q. and Li, X. Microstructural study of 17-4PH stainless steel after plasma...1 Mechanical Behavior of Additive Manufactured Layered Materials, Part 2: Stainless Steels * Todd M. Mower † and Michael J. Long M.I.T. Lincoln... stainless steel alloys produced with Direct Metal Laser Sintering (DMLS) was measured and is compared to that of similar conventional materials

  8. 48 CFR 1852.235-74 - Additional Reports of Work-Research and Development.

    Science.gov (United States)

    2010-10-01

    ...-Research and Development. 1852.235-74 Section 1852.235-74 Federal Acquisition Regulations System NATIONAL... Provisions and Clauses 1852.235-74 Additional Reports of Work—Research and Development. As prescribed in 1835.070(e), insert a clause substantially the same as the following: Additional Reports of Work—Research...

  9. An Introduction to Item Response Theory for Health Behavior Researchers

    Science.gov (United States)

    Warne, Russell T.; McKyer, E. J. Lisako; Smith, Matthew L.

    2012-01-01

    Objective: To introduce item response theory (IRT) to health behavior researchers by contrasting it with classical test theory and providing an example of IRT in health behavior. Method: Demonstrate IRT by fitting the 2PL model to substance-use survey data from the Adolescent Health Risk Behavior questionnaire (n = 1343 adolescents). Results: An…

  10. Translational Research: It's Not 1960s Behavior Analysis

    Science.gov (United States)

    Poling, Alan; Edwards, Timothy L.

    2011-01-01

    The authors find Critchfield's article ("Translational Contributions of the Experimental Analysis of Behavior," "The Behavior Analyst," v34, p3-17, 2011) scholarly, clear, and insightful. In it, Critchfield provides an excellent overview of translational research in behavior analysis and suggests several general strategies for increasing the…

  11. Political behavior in organizational context: nature, research and paradigm

    Directory of Open Access Journals (Sweden)

    Hasan Jafariani

    2012-09-01

    Full Text Available This paper investigates political behavior in organization context. In the first section, it studies inappropriate terminology in political behavior arena and recommends that political behaviors are neither positive nor negative in nature. The study also demonstrates that ends and means for influencing others are two criteria for determining faces of political behavior. In the second section, related and important research are reviewed and categorized in terms of content. Finally, we present the dominant paradigm of political behavior as a philosophical infrastructure. The study also presents some guidelines for further research the limitations are discussed in conclusion part.

  12. Effects of Polymeric Additives on the Crystallization and Release Behavior of Amorphous Ibuprofen

    Directory of Open Access Journals (Sweden)

    Su Yang Lee

    2013-01-01

    Full Text Available Some polymeric additives were studied to understand their effects on the amorphous phase of ibuprofen (IBU, used as a poorly water soluble pharmaceutical model compound. The amorphous IBU in bulk, as well as in nanopores (diameter ~24 nm of anodic aluminum oxide, was examined with the addition of poly(acrylic acid, poly(N-vinyl pyrrolidone, or poly(4-vinylphenol. Results of bulk crystallization showed that they were effective in limiting the crystal growth, while the nucleation of the crystalline phase in contact with water was nearly instantaneous in all cases. Poly(N-vinyl pyrrolidone, the most effective additive, was in specific interaction with IBU, as revealed by IR spectroscopy. The addition of the polymers was combined with the nanoscopic confinement to further stabilize the amorphous phase. Still, the IBU with addition of polymeric additives showed sustained release behavior. The current study suggested that the inhibition of the crystal nucleation was probably the most important factor to stabilize the amorphous phase and fully harness its high solubility.

  13. Choline chloride-based deep eutectic solvents as additives for optimizing chromatographic behavior of caffeic acid

    International Nuclear Information System (INIS)

    Li, Guizhen; Zhu, Tao; Lei, Yingjie

    2015-01-01

    A series of deep eutectic solvents (DESs) were prepared using glycerol and choline chloride (ChCl), and Fourier transform infrared spectrometer (FT-IR) was used to analyze the spectra of glycerol, choline chloride and DESs based on glycerol and choline chloride. Then DESs were used as the additives of mobile phase to optimize chromatographic behavior of caffeic acid in high performance liquid chromatography (HPLC). A 17-run Box-Behnken design (BBD) was employed to evaluate effect of DESs as additives by analyzing the maximum theoretical plate number. Three factors, reaction temperature (60 .deg. C, 80 .deg. C, 100 .deg. C), molar ratio of glycerol and choline chloride (2 : 1, 3 : 1, 4 : 1, n/n), and volume percent of additives (0.05%, 0.10%, 0.15%, v/v), were investigated in BBD. The optimum experiment condition was that of reaction temperature (80 .deg. C), molar ratio of glycerol and ChCl (3 : 1, n/n), and volume percent of additive (0.10%, v/v). The mean chromatographic theoretical plate number of the caffeic acid this condition was 1567.5, and DESs as additives shorten the retention time and modify the chromatogram shape, proving DESs as additives for effective theoretical plate number and column efficiency in HPLC.

  14. Choline chloride-based deep eutectic solvents as additives for optimizing chromatographic behavior of caffeic acid

    Energy Technology Data Exchange (ETDEWEB)

    Li, Guizhen; Zhu, Tao; Lei, Yingjie [Tianjin University of Technology, Tianjin (China)

    2015-10-15

    A series of deep eutectic solvents (DESs) were prepared using glycerol and choline chloride (ChCl), and Fourier transform infrared spectrometer (FT-IR) was used to analyze the spectra of glycerol, choline chloride and DESs based on glycerol and choline chloride. Then DESs were used as the additives of mobile phase to optimize chromatographic behavior of caffeic acid in high performance liquid chromatography (HPLC). A 17-run Box-Behnken design (BBD) was employed to evaluate effect of DESs as additives by analyzing the maximum theoretical plate number. Three factors, reaction temperature (60 .deg. C, 80 .deg. C, 100 .deg. C), molar ratio of glycerol and choline chloride (2 : 1, 3 : 1, 4 : 1, n/n), and volume percent of additives (0.05%, 0.10%, 0.15%, v/v), were investigated in BBD. The optimum experiment condition was that of reaction temperature (80 .deg. C), molar ratio of glycerol and ChCl (3 : 1, n/n), and volume percent of additive (0.10%, v/v). The mean chromatographic theoretical plate number of the caffeic acid this condition was 1567.5, and DESs as additives shorten the retention time and modify the chromatogram shape, proving DESs as additives for effective theoretical plate number and column efficiency in HPLC.

  15. Organizational Behavior Research in Transition Time of China

    Institute of Scientific and Technical Information of China (English)

    SHI Kan

    2004-01-01

    The article is to introduce author's research results in recent years in the field of leadership behavior. The main researches conducted in this field include competency model of senior executives in communication industry and family firms; transformational leadership and its relationship with leadership effectiveness, the impact of supervisor's feedback on employees' behavior and the cross-culture study of supervisor's feedback. Theoretical and practical contributions of these researches are explained. Directions for future research are discussed.

  16. Effect of nanoparticles as lubricant additives on friction and wear behavior of tetrahedral amorphous carbon (ta-C coating

    Directory of Open Access Journals (Sweden)

    Xiang Li

    2018-03-01

    Full Text Available As diamond like carbon (DLC coating becomes increasingly popular in providing low friction and wear under lubricated conditions, the effect of various oil additives on tribological behavior of DLC coating is drawing more attention. Various oil additives, such as ZnDTP and MoDTC, have been widely used in automobile engine industry to pursuit excellent tribological performance in the insufficient lubrication condition. Although such commercial oil additives have been proven to reduce friction or/and wear to some extent, usage of such high -SAPS (sulphuric ash, phosphor, sulfphur conventional additives is bound to arouse concerns due to environmental reasons. In this research, we investigate the effect of two nanoparticle oil additives, which are cerium oxide (CeO2 and zirconium dioxide (ZrO2, on friction and wear of non-hydrogen tetrahedral amorphous carbon (ta-C coating. The results show that by adding ZrO2 nanoparticle, the friction of DLC coating could be reduced about 32% compared to non-additive base oil scenario, but specific wear rate increases by 40%. When CeO2 nanoparticle is used, friction increases by 22% compared to non-additive base oil scenario, however wear decreases by nearly 77%.

  17. Researches on relationship between consumers? attachments and behaviors

    OpenAIRE

    Yu Yu-fan

    2013-01-01

    The paper aims for studying the relationship between consumers? attachment styles and consumers? behaviors, especially ethical consumption and conformity consumption. Based on combing the previous researches, studies conclude that: “secure attachment” people and their ethical behaviors are most positively related, and “ambivalent attachment” people and their moral behaviors take second. Meanwhile, “avoidant attachment” people and their moral behaviors are most negatively related, and “fearful...

  18. Expanding the research area of behavior change support systems

    NARCIS (Netherlands)

    van Gemert-Pijnen, Julia E.W.C.; Reitberger, Wolfgang; Langrial, Sitwat; Ploderer, Bernd; Oinas-Kukkonen, Harri; Berkovsky, Shlomo; Freyne, Jill

    2013-01-01

    The First International Workshop on Behavior Change Support Systems attracted a great research interest. The selected papers focused on abstraction, implementation and evaluation of Behavior Change Support Systems. The workshop is an evidence of how researchers from around the globe have their own

  19. Animal Research in the "Journal of Applied Behavior Analysis"

    Science.gov (United States)

    Edwards, Timothy L.; Poling, Alan

    2011-01-01

    This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the "Journal of Applied Behavior Analysis" and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance…

  20. Field Research Studying Whales in an Undergraduate Animal Behavior Laboratory

    Science.gov (United States)

    MacLaren, R. David; Schulte, Dianna; Kennedy, Jen

    2012-01-01

    This work describes a new field research laboratory in an undergraduate animal behavior course involving the study of whale behavior, ecology and conservation in partnership with a non-profit research organization--the Blue Ocean Society for Marine Conservation (BOS). The project involves two weeks of training and five weekend trips on whale watch…

  1. Plasma electrolytic oxidation of AZ91D magnesium alloy with different additives and its corrosion behavior

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Fa-he; Cao, Jiang-lin; Zhang, Zhao [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Zhang, Jian-qing; Cao, Chu-nan [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); State Key Laboratory for Corrosion and Protection, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016 (China)

    2007-09-15

    Plasma electrolytic oxidation (PEO) of Mg-based AZ91D alloys was investigated using 50 Hz AC anodizing technique in an alkaline borate solution, which contained a new kind of organic additive and without F, P, and Cr. The anodizing technological parameters have been optimized and a kind of ivory-white smooth anodic film with high corrosion resistance was obtained. It was found that the formation of the anodic films was always coupled with sparking and oxygen evolution, whose intensity changed with the additive and anodizing voltage. All EIS plots have two capacitive loops and one low frequency inductive component. Two capacitive arcs present the barrier and porous layer of the PEO film and the inductive component in the low frequency domain is a complex behavior due to the porous structure connected to the electrolyte. EIS plots and fitting results show that a self-sealing process of the PEO firm with different additives takes place in the beginning of immersion time, then corrosion attack becomes a preponderant process to promote the degradation of the film. Tafel results show that PEO treatment decreases the corrosion current density by four, even five orders of magnitude, while additives content does not affect strongly the electrochemical corrosion behavior. Salt spray test shows that the PEO film formed with NaAlO{sub 2} and Na{sub 2}SiO{sub 3} presents good corrosion resistance, over 600 h without any sealing treatment. The difference of corrosion resistance arose by additives examined by electrochemical techniques and salt spray test does not show strict corresponding relationship. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  2. Research on hypnosis as an adjunct to cognitive-behavioral psychotherapy.

    Science.gov (United States)

    Schoenberger, N E

    2000-04-01

    There is a growing body of research evaluating the use of hypnosis with cognitive-behavioral techniques in the treatment of psychological disorders. The central question for research is whether the addition of hypnosis enhances the efficacy of cognitive-behavioral treatments. Overall, studies demonstrate a substantial benefit from the addition of hypnosis; however, the number of published studies is relatively small, and many of them have methodological limitations. For cognitive-behavioral hypnotherapies to be recognized as empirically supported treatments, a number of well-designed, randomized clinical trials are necessary. Currently, the efficacy of hypnosis as an adjunctive treatment remains unresolved.

  3. Topical Review: Translating Translational Research in Behavioral Science.

    Science.gov (United States)

    Hommel, Kevin A; Modi, Avani C; Piazza-Waggoner, Carrie; Myers, James D

    2015-01-01

    To present a model of translational research for behavioral science that communicates the role of behavioral research at each phase of translation. A task force identified gaps in knowledge regarding behavioral translational research processes and made recommendations regarding advancement of knowledge. A comprehensive model of translational behavioral research was developed. This model represents T1, T2, and T3 research activities, as well as Phase 1, 2, 3, and 4 clinical trials. Clinical illustrations of translational processes are also offered as support for the model. Behavioral science has struggled with defining a translational research model that effectively articulates each stage of translation and complements biomedical research. Our model defines key activities at each phase of translation from basic discovery to dissemination/implementation. This should be a starting point for communicating the role of behavioral science in translational research and a catalyst for better integration of biomedical and behavioral research. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  4. Mechanical behavior of polymer-matrix biocomposites modified by nano/micro additives

    Czech Academy of Sciences Publication Activity Database

    Suchý, Tomáš; Balík, Karel; Sucharda, Zbyněk; Černý, Martin; Sochor, M.

    -, 77-78 (2008), s. 8-10 ISSN 1429-7248. [Conference Biomaterials in Medicine and Veterinary Medicine /18./. Rytro, 13.11.2008-16.11.2008] R&D Projects: GA ČR(CZ) GA106/06/1576 Institutional research plan: CEZ:AV0Z30460519 Keywords : additives * calcium phosphates * mechanical properties Subject RIV: JI - Composite Materials

  5. Behavior modification therapy in hyperactive children. Research and clinical implications.

    Science.gov (United States)

    Wolraich, M L

    1979-09-01

    One hundred fifty-seven studies employing behavior modification in the management of hyperactive and disruptive children were reviewed. The studies were analyzed against standards of scientific validity. The review found: (1) behavior modification was effective in alleviating problem behaviors; (2) token programs were the most commonly used; (3) both positive reinforcement and punishment were effective; positive reinforcement, however, had the advantage of improving self-esteem; (4) behavioral problems occurring in the home most likely require a home-based program; (5) behavior modification and stimulant medication can be used simultaneously, often with additive effects; and (6) long-term benefits beyond one year have not been assessed.

  6. Effects of minor alloying additions on the strength and swelling behavior of an austenitic stainless steel

    International Nuclear Information System (INIS)

    Gessel, G.R.

    1978-06-01

    A set of 32 alloys consisting of various additions of the elements Mo, W, Al, Ti, Nb, C and Si to an Fe-7.5 Cr-20 Ni alloy were made in order to investigate the effects of these solute additions on alloy swelling and strength. Both single and multiple additions were examined. The influence of various solute elements on the swelling behavior in the range 500 to 730 0 C was investigated using 4 MeV Ni ion bombardment to a dose 170 dpa. It was found that on an atomic percent basis, the elements may be arranged in order of decreasing effectiveness in reducing peak temperature swelling as follows: Ti, C, Nb, Si, and Mo. Small amounts of aluminum enhance swelling. Additions of Si, Ti, or Nb truncate the high temperature swelling regime of the ternary alloy. Mo, W, and C do not have a strong effect on the temperature dependence of swelling. The results may be interpreted in terms of the effect of point defect trapping on void growth rates, and it is suggested that the changes in peak temperature are the result of small changes in the free vacancy formation energy. A method for treating certain multiple additions is proposed. The effect of these alloying additions on short time high temperature strength properties was estimated using hot hardness measurements over the temperature range 22 to 850 0 C. On an atom percent basis Nb and Ti were most effective in conferring solid solution strengthening and Si the least effective. In the regime 22 to approximately 650 0 C, the hardness data was found to fit an equation of the form: H = H 0 + b/T; where H is the hardness, T is the temperature, and H 0 and b are constants for a given alloy. An empirical method was devised to estimate the hot hardness of alloys containing more than one solute addition

  7. Research progress of behavioral variant frontotemporal dementia

    Directory of Open Access Journals (Sweden)

    Xiao-hua GU

    2015-07-01

    Full Text Available There is no epidemiological data of frontotemporal dementia (FTD in China. The application of updated diagnostic criteria, publishing of frontotemporal lobar degeneration (FTLD consensus in China, development of multimodal imaging and biomarkers promote the clinical understanding on behavioral variant frontotemporal dementia (bvFTD. There is still no drugs treating FTD approved by U.S. Food and Drug Administration (FDA. Multidisciplinary intervention may delay the progression of bvFTD. DOI: 10.3969/j.issn.1672-6731.2015.07.006

  8. Behavioral Response Research Evaluation Workshop (BRREW)

    Science.gov (United States)

    2015-09-30

    Len Thomas & Catriona Harris Centre for Research into Ecological and Environmental Modelling (CREEM) University of St Andrews St Andrews , UK...Specifically Dr. Hans Slabbekoorn (University of Leiden), Professor Vincent Janik (University of St Andrews ) and Professor Douglas Wartzok (Florida

  9. Effects of emulsifier addition on the crystallization and melting behavior of palm olein and coconut oil.

    Science.gov (United States)

    Maruyama, Jessica Mayumi; Soares, Fabiana Andreia Schafer De Martini; D'Agostinho, Natalia Roque; Gonçalves, Maria Inês Almeida; Gioielli, Luiz Antonio; da Silva, Roberta Claro

    2014-03-12

    Two commercial emulsifiers (EM1 and EM2), containing predominantly monoacylglycerols (MAGs), were added in proportiond of 1.0 and 3.0% (w/w) to coconut oil and palm olein. EM1 consisted of approximately 90% MAGs, whereas EM2 consisted of approximately 50% MAGs. The crystallization behavior of these systems was evaluated by differential scanning calorimetry (DSC) and microscopy under polarized light. On the basis of DSC results, it was clear that the addition of EM2 accelerated the crystallization of coconut oil and delayed the crystallization of palm olein. In both oils EM2 addition led to the formation of smaller spherulites, and these effects improved the possibilities for using these fats as ingredients. In coconut oil the spherulites were maintained even at higher temperatures (20 °C). The addition of EM1 to coconut oil changed the crystallization pattern. In palm olein, the addition of 3.0% (w/w) of this emulsifier altered the pattern of crystallization of this fat.

  10. EFFECT OF NICKEL AND COBALT ADDITIONS ON INFILTRATION BEHAVIOR, MICROSTRUCTURE AND HARDNESS OF W-AG COMPOSITES

    Directory of Open Access Journals (Sweden)

    N Parvin

    2014-12-01

    Full Text Available In this research, infiltration behavior of W-Ag composite compacts with Nickel and Cobalt as additives has been investigated. Nickel and Cobalt were added to Tungsten powder by two distinct methods: mixing elementally and reduction of salt solution. The coated Tungsten powders were compacted under controlled pressures to make porous skeleton with 32-37 vol. % porosity. Infiltration process was carried out at 1100 ̊C under a reducing atmosphere for 1h. The effect of additives on infiltration of Ag and density were evaluated by SEM and Archimedes methods. Properties of the specimens were compared following two distinct processes namely: I sintering simultaneously with infiltration process and II sintering prior to infiltration (pre-sintering process. It was found that specimens which were pre-sintered and then infiltrated with molten silver represent higher hardness and finer microstructure than the specimens infiltrated simultaneously with sintering.

  11. Research Training in the Biomedical, Behavioral, and Clinical Research Sciences

    Science.gov (United States)

    National Academies Press, 2011

    2011-01-01

    Comprehensive research and a highly-trained workforce are essential for the improvement of health and health care both nationally and internationally. During the past 40 years the National Research Services Award (NRSA) Program has played a large role in training the workforce responsible for dramatic advances in the understanding of various…

  12. Marine research in Greece and the additional Greek marine research centres: Progress and present situation

    Science.gov (United States)

    Haritonidis, S.

    1995-03-01

    Greece, as is known, has a coastline of 17 000 km, and over 2000 small and large islands. As expected, the quest of humankind for new sources of matter and energy has been focussed on the sea, with fishery being its primary interest. A number of philosophers and scientists have been involved in the study of this vast ecosystem since ancient times (Aristotle). The political, social and geographical upheavals witnessed in the Greek area, have, however resulted in bringing all these activities to a halt. The first contemporary research work commenced at the end of the 18th century/beginning of the 19th — with marine flora and fauna as its starting point. The first investigations had, of course, been limited to random collections of marine material done in the frame of international exploratory expeditions. Studies became more systematic by the end of the 19th and beginning of the 20th century, with priority being given to the animal kingdom (fish, molluscs, etc.). Investigation of the marine phytobenthos (macrophyceae, phytoplankton) was to follow. The past 40 years research has been more extensive, not limited only to biogeographical evaluations, but also having expanded to physiological and ecological levels. The relevant institutes of Greek universities have all the while watched and contributed to this effort. Today, this kind of research is being supported by the N.M.R.C., the Center of Marine Research, University of Crete, and two research boats which sail the Greek seas. In the ever-changing world, the study of marine flora and fauna has certainly made great progress; however, there are still two big problems to be faced. The first deals with increasing pollution of the seas, the second, with the difficulties in finding and affording adequate financial resources that would enable a more detailed and complete execution of this research work.

  13. Beyond expected utility: rethinking behavioral decision research.

    Science.gov (United States)

    Frisch, D; Clemen, R T

    1994-07-01

    Much research in psychology has evaluated the quality of people's decisions by comparisons with subjective expected utility (SEU) theory. This article suggests that typical arguments made for the status of utility theory as normative do not justify its use by psychologists as a standard by which to evaluate decision quality. It is argued that to evaluate decision quality, researchers need to identify those decision processes that tend to lead to desirable outcomes. It is contended that a good decision-making process must be concerned with how (and whether) decision makers evaluate potential consequences of decisions, the extent to which they accurately identify all relevant consequences, and the way in which they make final choices. Research that bears on these issues is reviewed.

  14. ANOVA for the behavioral sciences researcher

    CERN Document Server

    Cardinal, Rudolf N

    2013-01-01

    This new book provides a theoretical and practical guide to analysis of variance (ANOVA) for those who have not had a formal course in this technique, but need to use this analysis as part of their research.From their experience in teaching this material and applying it to research problems, the authors have created a summary of the statistical theory underlying ANOVA, together with important issues, guidance, practical methods, references, and hints about using statistical software. These have been organized so that the student can learn the logic of the analytical techniques but also use the

  15. Cooperative behavior, competition and operations research

    NARCIS (Netherlands)

    Estevez Fernandez, M.A.

    2006-01-01

    Game theory is the mathematical tool to study cooperation and competition. Since the beginnings of operations research and game theory both fields have been closely related. This thesis further investigates this relationship. Costs or rewards sharing problems arising from scheduling problems,

  16. Adsorption behavior of redox-active suppressor additives: Combined electrochemical and STM studies

    International Nuclear Information System (INIS)

    Hai, N.T.M.; Huynh, T.M.T.; Fluegel, A.; Mayer, D.; Broekmann, P.

    2011-01-01

    Highlights: → Janus Green B and safranine are prototypical redox-active leveler additives for copper electroplating. → Their redox-transitions lie within the copper potential window. → Reduced additives are identified as active species for the leveling effect. → Electro-reduction affects in particular the central aromatic cores of the additives. - Abstract: The redox chemistry and the related surface phase behavior of Safranine (SAF) and Janus Green B (JGB) have been studied by means of cyclic voltammetry in combination with in situ Scanning Tunneling Microscopy using HOPG (Highly Oriented Pyrolytic Graphite) and single crystalline Cu(1 0 0) as model substrates, both revealing different widths of the accessible potential windows. JGB and SAF serve as prototypical heterocyclic suppressor/leveler additives that are used for the metallization of 3D-TSVs (3D Through Silicon Vias) following a classical 'leveling' concept. SAF can be considered as the reductive decomposition product of JGB that is formed at the copper/electrolyte interface upon electroplating. Both additives reveal a pronounced pH-dependent redox-chemistry with redox-transitions lying close to or even beyond the anodic limit of the copper potential window. Affected by these redox-processes are in particular the aromatic cores of those heterocycles that can be (quasi)reversibly reduced by a two electron transfer process within the potential window of copper. Therefore we identify the reduced form of those dyes as the active components for the suppressing/leveling effect in copper plating. STM data clearly shows a dye surface phase behavior that is crucially determined by its potential-dependent redox-chemistry. This will be exemplarily discussed for the SAF dye. On chloride-modified Cu(1 0 0) mono-reduced SAF forms a structurally well-defined monolayer of cationic stacking polymers. However, this coupled anion/cation layer reveals only minor suppressing capabilities with respect to the copper

  17. An extension of consumer environmental behavior research among expatriates

    OpenAIRE

    Bhuian, Shahid N.; Amyx, Douglas A.; Shamma, Hamad M.

    2014-01-01

    A wealth of research has explored different configurations of consumer environmental beliefs, attitudes, and values, and their influence on consumer environmental behavior. It is essential that a more comprehensive understanding of what lies at the root of consumer environmental beliefs, attitudes, values, and behaviors be developed. This study aims to address some of the limitations in the current literature by theorizing and examining a consumer environmental behavior model that includes th...

  18. Thermal decomposition behaviors of magnesium borohydride doped with metal fluoride additives

    International Nuclear Information System (INIS)

    Zhang, Z.G.; Wang, H.; Liu, J.W.; Zhu, M.

    2013-01-01

    Highlights: • The decomposition proceeded through several distinct steps. • The mixed materials show a dramatically low initial hydrogen release temperature. • The additives react with the Mg–B–H compounds rather than acting as catalysts. • The reaction process was studied using an in situ TEM. - Abstract: The thermal decomposition behaviors of Magnesium borohydride [Mg(BH 4 ) 2 ] and metal fluoride doped mixtures were studied by temperature programmed desorption measurement/mass spectrometry (TPD/MS), differential scanning calorimetry (DSC) and in situ transmission electron microscope (TEM) observations. The decomposition and release of hydrogen proceeded through several distinct steps, including two polymorphic transitions, ionic Mg(BH 4 ) 2 melting with solid Mg–B–H amorphous phase formation and Mg–B–H decomposition. The addition of additives such as CaF 2 , ZnF 2 and TiF 3 resulted in a decrease in the hydrogen release temperature. ZnF 2 and TiF 3 reduced the initial hydrogen release temperature to ca. 50 °C. However, hydrogen release during the transformation from γ-Mg(BH 4 ) 2 to the amorphous Mg–B–H compounds at ca. 300 °C was only 4.5 wt.% in contrast to 9.8 wt.% for the direct decomposition of pure Mg(BH 4 ) 2 . TEM observations confirmed that ZnF 2 and TiF 3 reacted with amorphous Mg–B–H compounds rather than acting as catalysts

  19. Electrooculography: Connecting Mind, Brain, and Behavior in Mathematics Education Research

    Science.gov (United States)

    Shipulina, Olga V.; Campbell, Stephen R.; Cimen, Arda O.

    2009-01-01

    This paper reports on the potential roles and importance of electrooculography (EOG) for mathematics educational neuroscience research. EOG enables accurate measurements of eye-related behavior (i.e., blinks & movements) by recording changes in voltage potentials generated by eye-related behavior. We identify and discuss three main uses of EOG.…

  20. Incorporating Transformative Consumer Research into the Consumer Behavior Course Experience

    Science.gov (United States)

    Petkus, Ed, Jr.

    2010-01-01

    In contrast to understanding consumer behavior for the benefit of business organizations, transformative consumer research (TCR) seeks to understand consumer behavior for the benefit of consumers themselves. Following Mari's (2008) call for the incorporation of TCR in doctoral programs in marketing, this article outlines the relevance of TCR to…

  1. Rheological Behavior of Carbon Nanotubes as an Additive on Lithium Grease

    Directory of Open Access Journals (Sweden)

    Alaa Mohamed

    2013-01-01

    Full Text Available The rheological behaviors of carbon nanotubes (CNTs as an additive on lithium grease at different concentrations were examined under various settings of shear rate, shear stress, and apparent viscosity. The results indicated that the optimum content of the CNTs was 2%. These experimental investigations were evaluated with a Brookfield Programmable Rheometer DV-III ULTRA. The results indicated that the shear, stress and apparent viscosity increase with the increase of CNTs concentration. The microstructure of CNTs and lithium grease was examined by high resolution transmission electron microscope (HRTEM and scanning electron microscope (SEM. The results indicated that the microscopic structure of the lithium grease presents a more regular and homogeneous network structure, with long fibers, which confirms the rheological stability.

  2. Rheological Behavior of Carbon Nano tubes as an Additive on Lithium Grease

    International Nuclear Information System (INIS)

    Mohamed, A.; Zaki, M.; Mohamed, A.; Khattab, A.A.; Osman, T.A.

    2013-01-01

    The rheological behaviors of carbon nano tubes (CNTs) as an additive on lithium grease at different concentrations were examined under various settings of shear rate, shear stress, and apparent viscosity. The results indicated that the optimum content of the CNTs was 2%. These experimental investigations were evaluated with a Brookfield Programmable Rheometer DV-III ULTRA. The results indicated that the shear, stress and apparent viscosity increase with the increase of CNTs concentration. The microstructure of CNTs and lithium grease was examined by high resolution transmission electron microscope (HRTEM) and scanning electron microscope (SEM). The results indicated that the microscopic structure of the lithium grease presents a more regular and homogeneous network structure, with long fibers, which confirms the rheological stability.

  3. Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions.

    Science.gov (United States)

    Amin Yavari, S; Loozen, L; Paganelli, F L; Bakhshandeh, S; Lietaert, K; Groot, J A; Fluit, A C; Boel, C H E; Alblas, J; Vogely, H C; Weinans, H; Zadpoor, A A

    2016-07-13

    Additive manufacturing (3D printing) has enabled fabrication of geometrically complex and fully interconnected porous biomaterials with huge surface areas that could be used for biofunctionalization to achieve multifunctional biomaterials. Covering the huge surface area of such porous titanium with nanotubes has been already shown to result in improved bone regeneration performance and implant fixation. In this study, we loaded TiO2 nanotubes with silver antimicrobial agents to equip them with an additional biofunctionality, i.e., antimicrobial behavior. An optimized anodizing protocol was used to create nanotubes on the entire surface area of direct metal printed porous titanium scaffolds. The nanotubes were then loaded by soaking them in three different concentrations (i.e., 0.02, 0.1, and 0.5 M) of AgNO3 solution. The antimicrobial behavior and cell viability of the developed biomaterials were assessed. As far as the early time points (i.e., up to 1 day) are concerned, the biomaterials were found to be extremely effective in preventing biofilm formation and decreasing the number of planktonic bacteria particularly for the middle and high concentrations of silver ions. Interestingly, nanotubes not loaded with antimicrobial agents also showed significantly smaller numbers of adherent bacteria at day 1, which may be attributed to the bactericidal effect of high aspect ratio nanotopographies. The specimens with the highest concentrations of antimicrobial agents adversely affected cell viability at day 1, but this effect is expected to decrease or disappear in the following days as the rate of release of silver ions was observed to markedly decrease within the next few days. The antimicrobial effects of the biomaterials, particularly the ones with the middle and high concentrations of antimicrobial agents, continued until 2 weeks. The potency of the developed biomaterials in decreasing the number of planktonic bacteria and hindering the formation of biofilms make

  4. Research of aquatic organism addition influence on the reproduction of yeast cells in the dough

    Directory of Open Access Journals (Sweden)

    Дмитро Павлович Крамаренко

    2016-12-01

    Full Text Available The analysis of the research results of influence of various amounts of aquatic organism additions on the reproduction of yeast cells is given. A positive impact of aquatic organism addition of animal and plant origin in investigated quantities on the reproduction of yeast cells is revealed. The influence of the chemical composition of the aquatic organism additives on the reproduction of yeast cells is proved

  5. Historical Origins of Information Behavior Research by Reference Publication Year Spectroscopy

    Directory of Open Access Journals (Sweden)

    Faramarz Soheili

    2015-12-01

    Full Text Available Background: Using a quantitative method named reference publication year spectroscopy (RPYS, this research tried to determine the historical roots of information behavior research. RPYS pave the way for determining the significant years and works in information behavior. Methodology: Using scientometric method, the initial data of this study, have been extracted from the Web of Science. Using RPYS software, the revised data were analyzed and visualized in Excel. Finding: The distribution of cited references in information behavior revealed three peaks within 19th century. Moreover, our analysis identified 6 peaks between 1900 to 1969 in the field of information behavior, respectively in 1948, 1954, 1957, 1960, 1965, and 1967 has occurred. Results: Based on the study findings, it seems that information behavior research has been shaped intellectually by fields such as Psychology, quantitative and qualitative methodologies, etc. Additionally, it has been influenced by some theories and theoretical works.

  6. Study of corrosion behavior on the addition of sodium citrate in nickel electroplating on SPCC steel using EIS

    Science.gov (United States)

    Riastuti, R.; Ramadini, C.; Siallagan, S. T.; Rifki, A.; Herdino, F.

    2018-04-01

    The addition of sodium citrate to nickel electroplating process as additive is useful for refining the grain size of nickel deposit. The refining of grain size in nickel deposit as coating layer can improve surface performance, one of which corrosion resistance. This paper aims to investigate the effect of sodium citrate addition as grain refiner to promote corrosion resistance on SPCC steel. This experiment used Watt’s Bath solution of NiSO4 300 g/L, NiCl4 45 g/L, H3BO3 60 g/L, wetting agent 0.2 cc/L. Sodium citrate was added in composition of 45g/L and 60g/L. Nickel were deposited by direct current using current density on 6 A/dm2 at the acidity level of 5 for 30 minutes by keeping the operating temperature stable at 50°C. The grain size of nickel deposit was observed through Optical Microscope and Atomic Force Microscope (AFM). The corrosion behavior of SPCC was observed by linear polarization and Electrochemical Impedance Spectroscopy (EIS) methods using 3% NaCl solution. Based on the research, the addition of sodium citrate as grain refiner will increasing corrosion resistance on SPCC steel from 0.35 to 0.05 mm/year.

  7. Fatigue Crack Behavior of Stainless Steel 304 by the Addition of Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Rizwanulhaque Syed

    2014-01-01

    Full Text Available Fatigue is the main source of almost half of whole mechanical failures. This research investigated the effect on cyclic fatigue behavior of stainless steel 304 (SS304 when including carbon nanotubes (CNTs at the crack tip. The cyclic fatigue tests were conducted on compact tension (CT specimens to establish the relationship between crack growth and the number of cycles (a-N. It is found that the incorporation of a small amount of CNTs increased the fatigue life of the SS304/metal. Micrographs showed that the enhancement in fatigue life is caused by CNTs dense arrangement around the crack tip, entangled with each other, and finer grain size. Smooth bonding at the interface of the CNTs and SS304 grains is also observed.

  8. Influence of metal additives on pyrolysis behavior of bituminous coal by TG-FTIR analysis

    Energy Technology Data Exchange (ETDEWEB)

    Su, Wenjuan; Fang, Mengxiang; Cen, Jianmeng; Li, Chao; Luo, Zhongyang; Cen, Kefa [Zhejiang Univ., Hangzhou (China). State Key Lab. of Clean Energy Utilization

    2013-07-01

    To study the catalytic effects of alkali, alkaline earth and transition metal additives on coal pyrolysis behavior, bituminous coal loaded NaCl, KCl, CaCl{sub 2}, MgCl{sub 2}, FeCl{sub 3} and NiCl{sub 2} was respectively investigated using Thermogravimetry and Fourier Transform Infrared Spectroscopy (TG-FTIR). Results indicated that the maximum mass loss rate decreased under the metal additives in the primary pyrolysis stage. The total mass loss of pyrolysis was reduced in metals catalyzed pyrolysis except for Na loaded sample. Kinetic analysis was taken for all samples adopting the method of Coats-Redfern. Activation energy of raw coal in the primary pyrolysis stage was 92.15vkJ.mol{sup -1}, which was lowered to 44.59-73.42 kJ.mol{sup -1} under metal additives. The orders of catalytic effect for this bituminous coal were Mg > Fe > Ca > Ni > K > Na according to their activation energies. Several investigated volatiles including CH{sub 4}, CO{sub 2}, CO, toluene, phenol and formic acid were identified from FTIR spectra. The yields of CH{sub 4}, CO{sub 2}, toluene, phenol and formic acid were decreased, but the evolution of CO was increased. The presence of metals in the coal samples have been involved in a repeated bond-forming and bond-breaking process, which greatly hindered the release of tars during pyrolysis as the tar precursors were connected to coal/char matrix and were thermally cracked, becoming a part of char.

  9. Animal research in the Journal of Applied Behavior Analysis.

    Science.gov (United States)

    Edwards, Timothy L; Poling, Alan

    2011-01-01

    This review summarizes the 6 studies with nonhuman animal subjects that have appeared in the Journal of Applied Behavior Analysis and offers suggestions for future research in this area. Two of the reviewed articles described translational research in which pigeons were used to illustrate and examine behavioral phenomena of applied significance (say-do correspondence and fluency), 3 described interventions that changed animals' behavior (self-injury by a baboon, feces throwing and spitting by a chimpanzee, and unsafe trailer entry by horses) in ways that benefited the animals and the people in charge of them, and 1 described the use of trained rats that performed a service to humans (land-mine detection). We suggest that each of these general research areas merits further attention and that the Journal of Applied Behavior Analysis is an appropriate outlet for some of these publications.

  10. Improving precipitation hardening behavior of Mg−Zn based alloys with Ce−Ca microalloying additions

    Energy Technology Data Exchange (ETDEWEB)

    Langelier, B., E-mail: langelb@mcmaster.ca [Mechanical & Mechatronics Engineering, The University of Waterloo, N2L 3G1 (Canada); Canadian Centre for Electron Microscopy, McMaster University, L8S 4L8 (Canada); Korinek, A. [Canadian Centre for Electron Microscopy, McMaster University, L8S 4L8 (Canada); Donnadieu, P. [Univ. Grenoble Alpes, SIMAP, F-38000 Grenoble (France); CNRS, SIMAP, F-38000 Grenoble (France); Esmaeili, S. [Mechanical & Mechatronics Engineering, The University of Waterloo, N2L 3G1 (Canada)

    2016-10-15

    The precipitation hardening behavior of newly developed Mg−Zn−Ca−Ce alloys, with modified texture and improved ductility, is studied to delineate the microstructural characteristics that lead to effective hardening upon ageing treatments. Advanced electron microscopy and atom probe techniques are used to analyze the structural characteristics in relevance to the hardening potential. It has been found that the formation of a new basal precipitate phase, which evolves from a single atomic layer GP zone, and is finely distributed in both under-aged and peak-aged microstructures, has a significant impact in the improvement of the hardening response compared with the base Mg−Zn alloys. It has also been found that the β′{sub 1} rod precipitates, commonly formed during ageing treatments of Mg−Zn alloys, have their size and distribution significantly refined in the Ca−Ce containing alloys. The role of alloy chemistry in the formation of the fine basal plate GP zones and the refinement in β′{sub 1} precipitation and their relationships to the hardening behavior are discussed. It is proposed that Ca microalloying governs the formation of the GP zones and the enhancement of hardening, particularly in the under-aged conditions, but that this is aided by a beneficial effect from Ce. - Highlights: • Ce−Ca microalloying additions improve hardening in Mg−Zn, over Ce or Ca alone. • Improved hardening is due to refined β′{sub 1} rods, and fine basal plate precipitates. • Atom probe tomography identifies Ca in both β′{sub 1} and the fine basal plates. • The fine basal plates originate as ordered monolayer GP zones with 1:1 Zn:Ca (at.%). • With ageing GP zones become more Zn-rich and transform to the fine basal plates.

  11. Behavioral finance: new research trends, socionomics and investor emotions

    OpenAIRE

    Adrian MITROI; Alexandru OPROIU

    2014-01-01

    The paper presents a critique of standard investment analysis, fundamental and technical, and develops an alternative more comprehensive approach that should include some of the tenets of behavioral finance. In the pursuit of understanding the behavior of the market player, the basic argument relies on the supposition that the risk appetite increases exactly at the worst moment - when the capacity to assume additional risk decreases significantly. People view a sample random...

  12. What Price Ethics: New Research Directions in Counselor Ethical Behavior

    Science.gov (United States)

    Paradise, Louis V.

    1978-01-01

    This paper briefly examines research on the ethical behavior of counselors, demonstrating that new directions in this area are needed, and that new research questions must be asked if significant information relating to counseling and ethics is to advance. Areas of inquiry and methods for investigation are suggested. (Author)

  13. Use of Laboratory Animals in Biomedical and Behavioral Research

    National Research Council Canada - National Science Library

    1988-01-01

    ... of Laboratory Animals in Biomedical and Behavioral Research Commission on Life Sciences National Research Council Institute of Medicine NATIONAL ACADEMY PRESS Washington, D.C. 1988 Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, authoritative the typesetting-specific created from the as publ...

  14. Conceptual framework for behavioral and social science in HIV vaccine clinical research.

    Science.gov (United States)

    Lau, Chuen-Yen; Swann, Edith M; Singh, Sagri; Kafaar, Zuhayr; Meissner, Helen I; Stansbury, James P

    2011-10-13

    HIV vaccine clinical research occurs within a context where biomedical science and social issues are interlinked. Previous HIV vaccine research has considered behavioral and social issues, but often treated them as independent of clinical research processes. Systematic attention to the intersection of behavioral and social issues within a defined clinical research framework is needed to address gaps, such as those related to participation in trials, completion of trials, and the overall research experience. Rigorous attention to these issues at project inception can inform trial design and conduct by matching research approaches to the context in which trials are to be conducted. Conducting behavioral and social sciences research concurrent with vaccine clinical research is important because it can help identify potential barriers to trial implementation, as well as ultimate acceptance and dissemination of trial results. We therefore propose a conceptual framework for behavioral and social science in HIV vaccine clinical research and use examples from the behavioral and social science literature to demonstrate how the model can facilitate identification of significant areas meriting additional exploration. Standardized use of the conceptual framework could improve HIV vaccine clinical research efficiency and relevance. Published by Elsevier Ltd.

  15. The Ethical Behavior of Counselors: New Directions in Ethical Behavior Research.

    Science.gov (United States)

    Paradise, Louis V.

    The ethical behavior of counselors is an issue of current importance to those in the profession. This paper briefly examines the literature in this area. While considerable descriptive research on ethical behavior exists, the conspicuous absence of any experimental methodologies and theoretically-based investigations were noted. The need for new…

  16. Structural integrity of additive materials: Microstructure, fatigue behavior, and surface processing

    Science.gov (United States)

    Book, Todd A.

    Although Additive Manufacturing (AM) offers numerous performance advantages over existing methods, AM structures are not being utilized for critical aerospace and mechanical applications due to uncertainties in their structural integrity as a result of the microstructural variations and defects arising from the AM process itself. Two of these uncertainties are the observed scatter in tensile strength and fatigue lives of direct metal laser sintering (DMLS) parts. With strain localization a precursor for material failure, this research seeks to explore the impact of microstructural variations in DMLS produced materials on strain localization. The first part of this research explores the role of the microstructure in strain localization of DMLS produced IN718 and Ti6Al4V specimens (as-built and post-processed) through the characterization of the linkage between microstructural variations, and the accumulation of plastic strain during monotonic and low cycle fatigue loading. The second part of this research explores the feasibility for the application of select surface processing techniques in-situ during the DMLS build process to alter the microstructure in AlSi10Mg to reduce strain localization and improve material cohesion. This study is based on utilizing experimental observations through the employment of advanced material characterization techniques such as digital image correlation to illustrate the impacts of DMLS microstructural variation.

  17. How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?

    Science.gov (United States)

    Hedayati, R; Janbaz, S; Sadighi, M; Mohammadi-Aghdam, M; Zadpoor, A A

    2017-01-01

    Although the initial mechanical properties of additively manufactured porous biomaterials are intensively studied during the last few years, almost no information is available regarding the evolution of the mechanical properties of implant-bone complex as the tissue regeneration progresses. In this paper, we studied the effects of tissue regeneration on the static and fatigue behavior of selective laser melted porous titanium structures with three different porosities (i.e. 77, 81, and 85%). The porous structures were filled with four different polymeric materials with mechanical properties in the range of those observed for de novo bone (0.7GPamanufactured and filled porous structures were then determined. The static mechanical properties and fatigue life (including endurance limit) of the porous structures were found to increase by factors 2-7, even when they were filled with polymeric materials with relatively low mechanical properties. The relative increase in the mechanical properties was much higher for the porous structures with lower porosities. Moreover, the increase in the fatigue life was more notable as compared to the increase in the static mechanical properties. Such large values of increase in the mechanical properties with the progress of bone tissue regeneration have implications in terms of mechanical stimulus for bone tissue regeneration. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Federal Aviation Administration's behavioral research program for defense against hijackings.

    Science.gov (United States)

    Dailey, J T; Pickrel, E W

    1975-04-01

    Behavioral research has been significant contributions to the government's successful program for defense against hijackers. Today's boarding gate defenses have a leading role in that program, but they were rejected until creation of the behavioral profile made selective search feasible. Metal detectors now make search of all travelers practical but with increasing involvement of boarding gate employees, so a behavioral program is used to monitor their performance. Experience shows that some persons have penetrated boarding gate defenses, so another requirement was in-flight defenses. Flightpersonnel had defeated some past hijackers, so a behavioral analysis of past hijackings was used to identify tactics for in-flight defense. These were incorporated into training programs and distributed to all U.S. airlines, many government organizations, and foreign carriers. Research continues for updating these and developing new courses for special needs, such as defense against gangs.

  19. Human behavior research and the design of sustainable transport systems

    Science.gov (United States)

    Schauer, James J.

    2011-09-01

    reduced carbon emissions are central to the design and optimization of future low carbon transport systems. Gaker et al (2011) suggest a framework, and provide insight into the willingness of transport consumers to pay for emission reductions of carbon dioxide from their personal transport choices within the context of other attributes of transport variables. The results of this study, although limited to a small demographic segment of the US population, demonstrate that people can integrate information on greenhouse gas emissions with other transport attributes including cost and time. Likewise, the research shows that the study group was willing to pay for reduction in greenhouse gas emissions associated with their transport choices. The study examined auto purchase choice, transport mode choice and transport route choice, which represent key decisions associated with transport that impact greenhouse gas emissions. Interestingly, they found that the study group was willing to pay for reductions in greenhouse gas emissions at a relatively consistent price across these transport choices. Clearly, the study results may not broadly apply to all demographics of users of transport, even in the study domain, due to the small demographic segment that was examined and the fact that the study was conducted in the laboratory. However, the methods used by Gaker et al (2011) are cause for optimism that future studies can obtain much needed mapping of transport preferences and willingness to pay for greenhouse gas emission reductions associated with personal transport choices. Although the Gaker et al (2011) study is directed at understanding the promotion of low carbon transport in the context of existing infrastructures, the ability of these studies to elucidate human behavior and preferences within the trade-offs of transport are critical to the design of future transport systems that seek to meet transport demand with constrained greenhouse gas emissions. Additional studies of

  20. Children's Oncology Group's 2013 blueprint for research: behavioral science.

    Science.gov (United States)

    Noll, Robert B; Patel, Sunita K; Embry, Leanne; Hardy, Kristina K; Pelletier, Wendy; Annett, Robert D; Patenaude, Andrea; Lown, E Anne; Sands, Stephen A; Barakat, Lamia P

    2013-06-01

    Behavioral science has long played a central role in pediatric oncology clinical service and research. Early work focused on symptom relief related to side effects of chemotherapy and pain management related to invasive medical procedures. As survival rates improved, the focused has shifted to examination of the psychosocial impact, during and after treatment, of pediatric cancer and its treatment on children and their families. The success of the clinical trials networks related to survivorship highlights an even more critical role in numerous domains of psychosocial research and care. Within the cooperative group setting, the field of behavioral science includes psychologists, social workers, physicians, nurses, and parent advisors. The research agenda of this group of experts needs to focus on utilization of psychometrically robust measures to evaluate the impact of treatment on children with cancer and their families during and after treatment ends. Over the next 5 years, the field of behavioral science will need to develop and implement initiatives to expand use of standardized neurocognitive and behavior batteries; increase assessment of neurocognition using technology; early identification of at-risk children/families; establish standards for evidence-based psychosocial care; and leverage linkages with the broader behavioral health pediatric oncology community to translate empirically supported research clinical trials care to practice. Copyright © 2012 Wiley Periodicals, Inc.

  1. Methodological Issues in Online Qualitative Consumer Behavior Research

    Directory of Open Access Journals (Sweden)

    Žaneta Paunksnienė

    2014-03-01

    Full Text Available The aim of this paper is to reveal and discuss the methodological issues related to online qualitative consumer behavior research. A number of methodological issues are examined, related with the online qualitative research on consumer in-store emotional experience implemented by the authors. It is concluded that the Internet is becoming an increasingly attractive environment for consumer behavior research. A large part of scholars use the Internet as a medium for data collection and analysis. At the same time, researchers study the Internet as a source of information about consumer preferences, their virtual communities, prevailing relationships, traditions and attitudes. The Internet is analyzed as a phenomenon in itself, too. In this article, the Internet is analyzed as a tool for communicating with research participants, and collecting, storing and analyzing data. In general, qualitative inquiry is characterized by contextual and naturalistic approach to the study of objects and processes. Therefore, decision to carry out qualitative study in virtual environment must take additional strategic and tactical solutions. Most often, researchers need to decide about the mode of communication that solves time management, spontaneity and security problems. It is also relevant to sampling and its contents. Different solutions from quantitative studies are required in ensuring the ethics and quality of the study. During the analysis of the qualitative data collected through the Internet, mostly in a form of computer communication language (text, specific characteristics, such as backspacing and correction during the communication that impact spontaneity rate, the absence of non-verbal language, etc., are necessary to be taken into accountIt is concluded that all the above-mentioned issues must be addressed individually to the research topic, object, aim, research problem and the specifics of the respondents. When deciding about the method of

  2. A Review of Research on the Literacy of Students with Visual Impairments and Additional Disabilities

    Science.gov (United States)

    Parker, Amy T.; Pogrund, Rona L.

    2009-01-01

    Research on the development of literacy in children with visual impairments and additional disabilities is minimal even though these children make up approximately 65% of the population of children with visual impairments. This article reports on emerging themes that were explored after a review of the literature revealed nine literacy studies…

  3. Internet research: an opportunity to revisit classic ethical problems in behavioral research.

    Science.gov (United States)

    Pittenger, David J

    2003-01-01

    The Internet offers many new opportunities for behavioral researchers to conduct quantitative and qualitative research. Although the ethical guidelines of the American Psychological Association generalize, in part, to research conducted through the Internet, several matters related to Internet research require further analysis. This article reviews several fundamental ethical issues related to Internet research, namely the preservation of privacy, the issuance of informed consent, the use of deception and false feedback, and research methods. In essence, the Internet offers unique challenges to behavioral researchers. Among these are the need to better define the distinction between private and public behavior performed through the Internet, ensure mechanisms for obtaining valid informed consent from participants and performing debriefing exercises, and verify the validity of data collected through the Internet.

  4. Research on Capacity Addition using Market Model with Transmission Congestion under Competitive Environment

    Science.gov (United States)

    Katsura, Yasufumi; Attaviriyanupap, Pathom; Kataoka, Yoshihiko

    In this research, the fundamental premises for deregulation of the electric power industry are reevaluated. The authors develop a simple model to represent wholesale electricity market with highly congested network. The model is developed by simplifying the power system and market in New York ISO based on available data of New York ISO in 2004 with some estimation. Based on the developed model and construction cost data from the past, the economic impact of transmission line addition on market participants and the impact of deregulation on power plant additions under market with transmission congestion are studied. Simulation results show that the market signals may fail to facilitate proper capacity additions and results in the undesirable over-construction and insufficient-construction cycle of capacity addition.

  5. EXPLORATORY FACTOR ANALYSIS (EFA IN CONSUMER BEHAVIOR AND MARKETING RESEARCH

    Directory of Open Access Journals (Sweden)

    Marcos Pascual Soler

    2012-06-01

    Full Text Available Exploratory Factor Analysis (EFA is one of the most widely used statistical procedures in social research. The main objective of this work is to describe the most common practices used by researchers in the consumer behavior and marketing area. Through a literature review methodology the practices of AFE in five consumer behavior and marketing journals(2000-2010 were analyzed. Then, the choices made by the researchers concerning factor model, retention criteria, rotation, factors interpretation and other relevant issues to factor analysis were analized. The results suggest that researchers routinely conduct analyses using such questionable methods. Suggestions for improving the use of factor analysis and the reporting of results are presented and a checklist (Exploratory Factor Analysis Checklist, EFAC is provided to help editors, reviewers, and authors improve reporting exploratory factor analysis.

  6. Television Violence and Behavior: A Research Summary. ERIC Digest.

    Science.gov (United States)

    Smith, Marilyn E.

    This digest describes the overall pattern of the results of research on television violence and behavior. Several variables in the relationship between television violence and aggression related to characteristics of the viewers and to the portrayal of violence are identified. Viewer characteristics included: age, amount of television watched,…

  7. Promoting health: intervention strategies from social and behavioral research

    National Research Council Canada - National Science Library

    Smedley, Brian D; Syme, S. Leonard

    ... on Capitalizing on Social Science and Behavioral Research to Improve the Public's Health Division of Health Promotion and Disease Prevention INSTITUTE OF MEDICINE NATIONAL ACADEMY PRESS Washington, D.C. i Copyrightthe cannot be not from book, paper however, version for formatting, original authoritative the typesetting-specific the as from created pu...

  8. Behavioral Public Administration: Connecting Psychology with European Public Administration Research

    NARCIS (Netherlands)

    Leth Olsen, Asmus; Tummers, L.G.|info:eu-repo/dai/nl/341028274; Grimmelikhuijsen, S.G.|info:eu-repo/dai/nl/313875405; Jilke, Sebastian

    2017-01-01

    Well-known public administration scholars have stressed the importance of psychological research for the study of public administration. Neighboring disciplines such as economics and political science, have witnessed the emergence of the psychology-informed subfields of behavioral economics and

  9. The comeback of the interview in organizational behavior research

    NARCIS (Netherlands)

    Emans, Ben

    Organizational behavior, as a theory-developing field of research, is highly questionnaire-based and highly dependent on quantitative methods. In its dominant methodology tradition, variables are measured in a sample of respondents or other units of observation and the calculated relationships

  10. The behavior of biogenic silica-rich rocks and volcanic tuffs as pozzolanic additives in cement

    Science.gov (United States)

    Fragoulis, Dimitris; Stamatakis, Michael; Anastasatou, Marianthi

    2015-04-01

    Cements currently produced, include a variety of pozzolanic materials, aiming for lower clinker addition and utilization of vast deposits of certain raw materials and/or mining wastes and byproducts. The major naturally occurring pozzolanic materials include glassy tuffs, zeolitic tuffs, diatomites and volcanic lavas rich in glassy phase, such as perlites. Therefore, based on the available raw materials in different locations, the cement composition might vary according to the accessibility of efficient pozzolanic materials. In the present investigation, the behavior of pozzolanic cements produced with representative samples of the aforementioned materials was studied, following the characterization of the implemented pozzolanas with respect to their chemical and mineralogical characteristics. Laboratory cements were produced by co-grinding 75% clinker, 5% gypsum and 20% pozzolana, for the same period of time (45 min). Regarding pozzolanic materials, four different types of pozzolanas were utilized namely, diatomite, perlite, zeolite tuff and glassy tuff. More specifically, two diatomite samples originated from Australia and Greece, with high and low reactive silica content respectively, two perlite samples originated from Turkey and from Milos Island, Greece, with different reactive silica contents, a zeolite tuff sample originated from Turkey and a glassy tuff sample originated from Milos Island, Greece. The above pozzolana samples, which were ground in the laboratory ball mill for cement production performed differently during grinding and that was reflected upon the specific surface area (cm2/gr) values. The perlites and the glassy tuff were the hardest to grind, whereas, the zeolite tuff and the Australian diatomite were the easiest ones. However, the exceedingly high specific surface area of the Australian diatomite renders cement difficult to transport and tricky to use for concrete manufacturing, due to the high water demand of the cement mixture. Regarding

  11. Building new computational models to support health behavior change and maintenance: new opportunities in behavioral research.

    Science.gov (United States)

    Spruijt-Metz, Donna; Hekler, Eric; Saranummi, Niilo; Intille, Stephen; Korhonen, Ilkka; Nilsen, Wendy; Rivera, Daniel E; Spring, Bonnie; Michie, Susan; Asch, David A; Sanna, Alberto; Salcedo, Vicente Traver; Kukakfa, Rita; Pavel, Misha

    2015-09-01

    Adverse and suboptimal health behaviors and habits are responsible for approximately 40 % of preventable deaths, in addition to their unfavorable effects on quality of life and economics. Our current understanding of human behavior is largely based on static "snapshots" of human behavior, rather than ongoing, dynamic feedback loops of behavior in response to ever-changing biological, social, personal, and environmental states. This paper first discusses how new technologies (i.e., mobile sensors, smartphones, ubiquitous computing, and cloud-enabled processing/computing) and emerging systems modeling techniques enable the development of new, dynamic, and empirical models of human behavior that could facilitate just-in-time adaptive, scalable interventions. The paper then describes concrete steps to the creation of robust dynamic mathematical models of behavior including: (1) establishing "gold standard" measures, (2) the creation of a behavioral ontology for shared language and understanding tools that both enable dynamic theorizing across disciplines, (3) the development of data sharing resources, and (4) facilitating improved sharing of mathematical models and tools to support rapid aggregation of the models. We conclude with the discussion of what might be incorporated into a "knowledge commons," which could help to bring together these disparate activities into a unified system and structure for organizing knowledge about behavior.

  12. Personality and externalizing behavior in the transition to young adulthood : The additive value of personality facets

    NARCIS (Netherlands)

    Klimstra, Theo A.; Luyckx, Koen; Hale, William W.; Goossens, Luc

    2014-01-01

    Purpose: The directionality of effects in the associations between personality and externalizing behavior (i.e., delinquency, soft drugs use, and alcohol abuse) is unclear. Moreover, previous studies only examined personality trait domains when examining these associations, whereas personality

  13. Personality and externalizing behavior in the transition to young adulthood: the additive value of personality facets.

    Science.gov (United States)

    Klimstra, Theo A; Luyckx, Koen; Hale Iii, William W; Goossens, Luc

    2014-08-01

    The directionality of effects in the associations between personality and externalizing behavior (i.e., delinquency, soft drugs use, and alcohol abuse) is unclear. Moreover, previous studies only examined personality trait domains when examining these associations, whereas personality facets underlying these broad domains provide more specificity. To address these limitations, the present study examined the directionality of effects between externalizing behavior and personality while employing a facet-level approach to personality. Cross-lagged panel models were employed to four annual measurement waves of longitudinal data on 485 Belgian-Caucasian late adolescents (87.4 % female; M age = 18.63 years, SD = 0.61). Participants filled out the NEO-FFI as a measure of personality, the Deviant Behavior Scale as a measure of delinquency, and single items for soft drugs use and alcohol abuse on all four measurement occasions. The incremental value of personality facets over broad trait domains was demonstrated, as it was often the case that only some, but not all, facets underlying a specific trait domain were significantly associated with specific externalizing behaviors. Furthermore, linkages between personality and externalizing behavior were shown to be complex. Depending on the personality trait domain or facet and the specific behavior under investigation, the directionality of effects may differ. To capture the full complexity of the linkages between personality and externalizing behavior, a facet approach to personality is recommended. This information is potentially important for clinicians, as it indicates which specific aspects of a broad trait domain affect, and are affected by, specific externalizing behaviors.

  14. Behavioral Economic Laboratory Research in Tobacco Regulatory Science.

    Science.gov (United States)

    Tidey, Jennifer W; Cassidy, Rachel N; Miller, Mollie E; Smith, Tracy T

    2016-10-01

    Research that can provide a scientific foundation for the United States Food and Drug Administration (FDA) tobacco policy decisions is needed to inform tobacco regulatory policy. One factor that affects the impact of a tobacco product on public health is its intensity of use, which is determined, in part, by its abuse liability or reinforcing efficacy. Behavioral economic tasks have considerable utility for assessing the reinforcing efficacy of current and emerging tobacco products. This paper provides a narrative review of several behavioral economic laboratory tasks and identifies important applications to tobacco regulatory science. Behavioral economic laboratory assessments, including operant self-administration, choice tasks and purchase tasks, can be used generate behavioral economic data on the effect of price and other constraints on tobacco product consumption. These tasks could provide an expedited simulation of the effects of various tobacco control policies across populations of interest to the FDA. Tobacco regulatory research questions that can be addressed with behavioral economic tasks include assessments of the impact of product characteristics on product demand, assessments of the abuse liability of novel and potential modified risk tobacco products (MRTPs), and assessments of the impact of conventional and novel products in vulnerable populations.

  15. Peer relations, adolescent behavior, and public health research and practice.

    Science.gov (United States)

    Crosnoe, Robert; McNeely, Clea

    2008-01-01

    Peer relations are central to adolescent life and, therefore, are crucial to understanding adolescents' engagement in various behaviors. In recent years, public health research has increasingly devoted attention to the implications of peer relations for the kinds of adolescent behaviors that have a direct impact on health. This article advocates for a continuation of this trend. With this aim, we highlight key themes in the rich literature on the general developmental significance of adolescent-peer relations, provide an overview of how these themes have been incorporated into public health research and practice, and suggest future avenues for peer-focused public health research that can inform adolescent health promotion in the United States.

  16. Mediator and moderator effects in developmental and behavioral pediatric research.

    Science.gov (United States)

    Rose, Brigid M; Holmbeck, Grayson N; Coakley, Rachael Millstein; Franks, Elizabeth A

    2004-02-01

    The terms mediation and moderation are defined and clarified with particular emphasis on the role of mediational and moderational analyses in developmental and behavioral pediatric research. The article highlights the applicability of mediational and moderational analyses to longitudinal, intervention, and risk and protective factor research, and it provides basic information about how these analyses might be conducted. Also included is a discussion of various ways that both mediator and moderator variables can be incorporated into a single model. The article concludes with extended examples of both types of analyses using a longitudinal pediatric study for illustration. The article provides recommendations for applying mediational and moderational research in clinical practice.

  17. Directions in implementation research methods for behavioral and social science.

    Science.gov (United States)

    Irwin, Molly; Supplee, Lauren H

    2012-10-01

    There is a growing interest, by researchers, policymakers, and practitioners, in evidence-based policy and practice. As a result, more dollars are being invested in program evaluation in order to establish "what works," and in some cases, funding is specifically tied to those programs found to be effective. However, reproducing positive effects found in research requires more than simply adopting an evidence-based program. Implementation research can provide guidance on which components of an intervention matter most for program impacts and how implementation components can best be implemented. However, while the body of rigorous research on effective practices continues to grow, research on implementation lags behind. To address these issues, the Administration for Children and Families and federal partners convened a roundtable meeting entitled, Improving Implementation Research Methods for Behavioral and Social Science, in the fall of 2010. This special section of the Journal of Behavioral Health Services & Research includes papers from the roundtable and highlights the role implementation science can play in shedding light on the difficult task of taking evidence-based practices to scale.

  18. Prioritizing multiple health behavior change research topics: expert opinions in behavior change science.

    Science.gov (United States)

    Amato, Katie; Park, Eunhee; Nigg, Claudio R

    2016-06-01

    Multiple health behavior change (MHBC) approaches are understudied. The purpose of this study is to provide strategic MHBC research direction. This cross-sectional study contacted participants through the Society of Behavioral Medicine email listservs and rated the importance of 24 MHBC research topics (1 = not at all important, 5 = extremely important) separately for general and underserved populations. Participants (n = 76) were 79 % female; 76 % White, 10 % Asian, 8 % African American, 5 % Hispanic, and 1 % Native Hawaiian/Pacific Islander. Top MHBC research priorities were predictors of behavior change and the sustainability, long-term effects, and dissemination/translation of interventions for both populations. Recruitment and retention of participants (t(68) = 2.17, p = 0.000), multi-behavioral indices (t(68) = 3.54, p = 0.001), and measurement burden (t(67) = 5.04, p = 0.001) were important for the underserved. Results identified the same top research priorities across populations. For the underserved, research should emphasize recruitment, retention, and measurement burden.

  19. Prioritizing research to reduce youth suicide and suicidal behavior.

    Science.gov (United States)

    Bridge, Jeffrey A; Horowitz, Lisa M; Fontanella, Cynthia A; Grupp-Phelan, Jackie; Campo, John V

    2014-09-01

    The goal of the National Action Alliance for Suicide Prevention is to reduce suicide and suicide attempts in the U.S. by 40% in the next decade. In this paper, a public health approach is applied to suicide prevention to illustrate how reductions in youth suicide and suicidal behavior might be achieved by prioritizing research in two areas: (1) increasing access to primary care-based behavioral health interventions for depressed youth and (2) improving continuity of care for youth who present to emergency departments after a suicide attempt. Finally, some scientific, clinical, and methodologic breakthroughs needed to achieve rapid, substantial, and sustained reductions in youth suicide and suicidal behavior are discussed. Copyright © 2014 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  20. Behavioral and Social Sciences at the National Institutes of Health: adoption of research findings in health research and practice as a scientific priority.

    Science.gov (United States)

    Riley, William T

    2017-06-01

    The National Institutes of Health's Office of Behavioral and Social Sciences Research (OBSSR) recently released its Strategic Plan for 2017 to 2021. This plan highlights three scientific priorities: (1) improve the synergy of basic and applied behavioral and social sciences research, (2) enhance and promote the research infrastructure, methods, and measures needed to support a more cumulative and integrated approach to behavioral and social sciences research, and (3) facilitate the adoption of behavioral and social sciences research findings in health research and in practice. This commentary focuses on the challenges and opportunities to facilitate the adoption of research findings in health research and in practice. In addition to the ongoing NIH support for dissemination and implementation (D&I) research, we must address transformative challenges and opportunities such as better disseminating and implementing D&I research, merging research and practice, adopting more rigorous and diverse methods and measures for both D&I and clinical trials research, evaluating technological-based delivery of interventions, and transitioning from minimally adaptable intervention packages to planned adaptations rooted in behavior change principles. Beyond translation into practice and policy, the OBSSR Strategic Plan also highlights the need for translation of behavioral and social science findings into the broader biomedical research enterprise.

  1. Exploring Additional Determinants of Environmentally Responsible Behavior: The Influence of Environmental Literature and Environmental Attitudes

    Science.gov (United States)

    Mobley, Catherine; Vagias, Wade M.; DeWard, Sarah L.

    2010-01-01

    It is often assumed that individuals who are knowledgeable and concerned about the environment will engage in environmentally responsible behavior (ERB). We use data from a large scale Web survey hosted on National Geographic's Web site in 2001-2002 to investigate this premise. We examine whether reading three classic environmental books…

  2. Edwin Grant Dexter: an early researcher in human behavioral biometeorology

    Science.gov (United States)

    Stewart, Alan E.

    2015-06-01

    Edwin Grant Dexter (1868-1938) was one of the first researchers to study empirically the effects of specific weather conditions on human behavior. Dexter (1904) published his findings in a book, Weather influences. The author's purposes in this article were to (1) describe briefly Dexter's professional life and examine the historical contexts and motivations that led Dexter to conduct some of the first empirical behavioral biometeorological studies of the time, (2) describe the methods Dexter used to examine weather-behavior relationships and briefly characterize the results that he reported in Weather influences, and (3) provide a historical analysis of Dexter's work and assess its significance for human behavioral biometeorology. Dexter's Weather influences, while demonstrating an exemplary approach to weather, health, and behavior relationships, came at the end of a long era of such studies, as health, social, and meteorological sciences were turning to different paradigms to advance their fields. For these reasons, Dexter's approach and contributions may not have been fully recognized at the time and are, consequently, worthy of consideration by contemporary biometeorologists.

  3. Does the model of additive effect in placebo research still hold true? A narrative review

    Science.gov (United States)

    Berger, Bettina; Weger, Ulrich; Heusser, Peter

    2017-01-01

    Personalised and contextualised care has been turned into a major demand by people involved in healthcare suggesting to move toward person-centred medicine. The assessment of person-centred medicine can be most effectively achieved if treatments are investigated using ‘with versus without’ person-centredness or integrative study designs. However, this assumes that the components of an integrative or person-centred intervention have an additive relationship to produce the total effect. Beecher’s model of additivity assumes an additive relation between placebo and drug effects and is thus presenting an arithmetic summation. So far, no review has been carried out assessing the validity of the additive model, which is to be questioned and more closely investigated in this review. Initial searches for primary studies were undertaken in July 2016 using Pubmed and Google Scholar. In order to find matching publications of similar magnitude for the comparison part of this review, corresponding matches for all included reviews were sought. A total of 22 reviews and 3 clinical and experimental studies fulfilled the inclusion criteria. The results pointed to the following factors actively questioning the additive model: interactions of various effects, trial design, conditioning, context effects and factors, neurobiological factors, mechanism of action, statistical factors, intervention-specific factors (alcohol, caffeine), side-effects and type of intervention. All but one of the closely assessed publications was questioning the additive model. A closer examination of study design is necessary. An attempt in a more systematic approach geared towards solutions could be a suggestion for future research in this field. PMID:28321318

  4. Applying additive logistic regression to data derived from sensors monitoring behavioral and physiological characteristics of dairy cows to detect lameness

    NARCIS (Netherlands)

    Kamphuis, C.; Frank, E.; Burke, J.; Verkerk, G.A.; Jago, J.

    2013-01-01

    The hypothesis was that sensors currently available on farm that monitor behavioral and physiological characteristics have potential for the detection of lameness in dairy cows. This was tested by applying additive logistic regression to variables derived from sensor data. Data were collected

  5. The potential application of European market research data in dietary exposure modelling of food additives.

    Science.gov (United States)

    Tennant, David Robin; Bruyninckx, Chris

    2018-03-01

    Consumer exposure assessments for food additives are incomplete without information about the proportions of foods in each authorised category that contain the additive. Such information has been difficult to obtain but the Mintel Global New Products Database (GNPD) provides information about product launches across Europe over the past 20 years. These data can be searched to identify products with specific additives listed on product labels and the numbers compared with total product launches for food and drink categories in the same database to determine the frequency of occurrence. There are uncertainties associated with the data but these can be managed by adopting a cautious and conservative approach. GNPD data can be mapped with authorised food categories and with food descriptions used in the EFSA Comprehensive European Food Consumption Surveys Database for exposure modelling. The data, when presented as percent occurrence, could be incorporated into the EFSA ANS Panel's 'brand-loyal/non-brand loyal exposure model in a quantitative way. Case studies of preservative, antioxidant, colour and sweetener additives showed that the impact of including occurrence data is greatest in the non-brand loyal scenario. Recommendations for future research include identifying occurrence data for alcoholic beverages, linking regulatory food codes, FoodEx and GNPD product descriptions, developing the use of occurrence data for carry-over foods and improving understanding of brand loyalty in consumer exposure models.

  6. Research on hardness and tensile properties of A390 alloy with tin addition

    Science.gov (United States)

    Si, Yi

    2018-03-01

    The effect of tin content on hardness and tensile properties of A390 alloys has been discussed. The microstructure of the A390 alloy with tin addition has been surveyed by OM and investigated by SEM. Research showed that β-Sn in the alloy precipitation forms were mainly small blocks and thin strips, particles within the Al2Cu network or large blocks consisting of β-Sn and Al2Cu on Al/Si interfaces or α-Al grain boundaries. Spheroidization of the primary and eutectic silicon was improved due to Sn accretion. With the augment of element tin, hardness of casting alloy is much higher than that of alloy after heat treatment. The elongation and ultimate tensile strength (UTS) were increased in Sn addition from 0 to 1%, which is attributed to the multiple action of Sn.

  7. Corrosion of research reactor aluminium clad spent fuel in water. Additional information

    International Nuclear Information System (INIS)

    2009-12-01

    A large variety of research reactor spent fuel with different fuel meats, different geometries and different enrichments in 235 U are presently stored underwater in basins located around the world. More than 90% of these fuels are clad in aluminium or aluminium based alloys that are notoriously susceptible to corrosion in water of less than optimum quality. Some fuel is stored in the reactor pools themselves, some in auxiliary pools (or basins) close to the reactor and some stored at away-from-reactor pools. Since the early 1990s, when corrosion induced degradation of the fuel cladding was observed in many of the pools, corrosion of research reactor aluminium clad spent nuclear fuel stored in light water filled basins has become a major concern, and programmes were implemented at the sites to improve fuel storage conditions. The IAEA has since then established a number of programmatic activities to address corrosion of research reactor aluminium clad spent nuclear fuel in water. Of special relevance was the Coordinated Research Project (CRP) on Corrosion of Research Reactor Aluminium Clad Spent Fuel in Water (Phase I) initiated in 1996, whose results were published in IAEA Technical Reports Series No. 418. At the end of this CRP it was considered necessary that a continuation of the CRP should concentrate on fuel storage basins that had demonstrated significant corrosion problems and would therefore provide additional insight into the fundamentals of localized corrosion of aluminium. As a consequence, the IAEA started a new CRP entitled Corrosion of Research Reactor Aluminium Clad Spent Fuel in Water (Phase II), to carry out more comprehensive research in some specific areas of corrosion of aluminium clad spent nuclear fuel in water. In addition to this CRP, one of the activities under IAEA's Technical Cooperation Regional Project for Latin America Management of Spent Fuel from Research Reactors (2001-2006) was corrosion monitoring and surveillance of research

  8. Effects of Ce, La and Ba addition on the electrochemical behavior of super duplex stainless steels

    International Nuclear Information System (INIS)

    Yoo, Yun-Ha; Choi, Yoon-Seok; Kim, Jung-Gu; Park, Yong-Soo

    2010-01-01

    The effects of rare earth metal (REM: Ce, La) and Ba addition on aqueous corrosion properties of super duplex stainless steels (SDSS) were investigated by electrochemical tests and surface analyses. The results of potentiodynamic test indicated that the passive range increased by the addition of Ce, La, and Ba, indicating increased relative resistance to localized corrosion. The EIS measurements showed that the Ce-La-Ba-bearing alloys exhibited higher R ct and R p values than the Ce-La-Ba-free alloy at the passive and breakdown states. Furthermore, the additions of REMs and Ba together promoted the formation of dense chromium-enriched passive film.

  9. Behavior of Serbian Tourists During Economic Crisis: Two Empirical Researches

    Directory of Open Access Journals (Sweden)

    Marija Najdić

    2012-10-01

    Full Text Available Tourist’s behavior research is focused on understanding and explaining the factors that affect tourist’s preferences and holiday destination choice. In this paper is analyzed the impact of the global economic crisis on the preferences toward leisure travels of the residents from Serbia. The paper is based on researches conducted in 2006-2009, through travel agencies and in 2011 on the general population major of age with support of TNS Medium Gallupa. Better understanding of the perception process and how tourists react to certain factor can give more accurate information on the dynamics of tourism demand and its dependence on tourist’s perception.

  10. Research on the reliability of friction system under combined additive and multiplicative random excitations

    Science.gov (United States)

    Sun, Jiaojiao; Xu, Wei; Lin, Zifei

    2018-01-01

    In this paper, the reliability of a non-linearly damped friction oscillator under combined additive and multiplicative Gaussian white noise excitations is investigated. The stochastic averaging method, which is usually applied to the research of smooth system, has been extended to the study of the reliability of non-smooth friction system. The results indicate that the reliability of friction system can be improved by Coulomb friction and reduced by random excitations. In particular, the effect of the external random excitation on the reliability is larger than the effect of the parametric random excitation. The validity of the analytical results is verified by the numerical results.

  11. Deception in medical and behavioral research: is it ever acceptable?

    Science.gov (United States)

    Wendler, D

    1996-01-01

    Ethicists argue that deception is unacceptable, whereas researchers regard it as a necessary part of (certain kinds of) research. This impasse could be resolved by establishing the specific conditions under which deception in medical and behavioral research can be tolerated. An approach based on a consideration of the "Ethical Principles of Psychologists and Code of Conduct," one of the few writings on this topic, would satisfy the needs of both parties. It takes the form of a requirement that subjects be informed of the use of deception before enrolling in a deceptive study. This "second order consent" approach to acceptable deception represents our best chance for reconciling respect for subjects with the occasional scientific need for deceptive research.

  12. Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions

    NARCIS (Netherlands)

    Amin Yavari, S.; Loozen, L.; Paganelli, F. L.; Bakhshandeh, S.; Lietaert, K.; Groot, J. A.; Fluit, A. C.; Boel, C. H E; Alblas, J.; Vogely, H. C.; Weinans, H.; Zadpoor, A. A.

    2016-01-01

    Additive manufacturing (3D printing) has enabled fabrication of geometrically complex and fully interconnected porous biomaterials with huge surface areas that could be used for biofunctionalization to achieve multifunctional biomaterials. Covering the huge surface area of such porous titanium with

  13. Effect of Cu addition on microstructure and corrosion behavior of spray-deposited Zn–30Al alloy

    International Nuclear Information System (INIS)

    Wang Feng; Xiong Baiqing; Zhang Yongan; Liu Hongwei; Li Zhihui; Li Xiwu; Qu Chu

    2012-01-01

    Highlights: ► Zn–30Al–xCu alloys were synthesized by the spray atomization and deposition technique. ► Immersion test and electrochemical measurements have been used to estimate the corrosion rate and the behavior. ► The result indicates that the 1 wt.% Cu addition displays superior corrosion resistance. - Abstract: In this study, one binary Zn–30Al and three ternary Zn–30Al–Cu alloys were synthesized by the spray atomization and deposition technique. The microstructures of the spray-deposited alloys were investigated by means of scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD). Immersion test, potentiodynamic polarization and electrochemical impedance measurements have been used to estimate the corrosion rate and the behavior. The results indicate that the 1 wt.% Cu addition to spray-deposited Zn–30Al alloy does not make significant change in microstructure. However, with the 2, 4 wt.% Cu additions to the alloy, some ε-CuZn 4 compounds with particle or irregular shapes were observed on the grain boundaries in the microstructures. Immersion test and electrochemical measurements confirmed that the 1 wt.% Cu addition displays superior corrosion resistance, whereas the 2, 4 wt.% Cu additions have a baneful effect on the corrosion behavior.

  14. Influence of additives (inorganic/organic on the clouding behavior of amphiphilic drug solutions: Some thermodynamic studies

    Directory of Open Access Journals (Sweden)

    Malik Abdul Rub

    2015-05-01

    Full Text Available Herein we provide a detailed result about the effect of various additives, viz. inorganic salts, quaternary ammonium bromides (QABs and amino acids on clouding behavior of amphiphilic drug amitriptyline hydrochloride (AMT. The continuous increase in the cloud point (CP of drug by increase in inorganic salt concentration and the magnitude of increases rely upon the position of the salts in Hofmeister series and hydrated radii. The QABs also influence continuous increase in the CP, which is illustrated in terms of the alkyl chain length of peculiar QAB. The effect of amino acids on CP of the drug solution is dependent upon the characteristics (acidic, basic, polar or nonpolar of particular amino acids. The overall behavior of additives has been analyzed and discussed on the basis of electrostatic repulsion or interaction, micellar growth, and mixed micelle formation between the ingredients. In addition to this, thermodynamic parameters are also evaluated.

  15. The construct-behavior gap in behavioral decision research: A challenge beyond replicability.

    Science.gov (United States)

    Regenwetter, Michel; Robinson, Maria M

    2017-10-01

    Behavioral decision research compares theoretical constructs like preferences to behavior such as observed choices. Three fairly common links from constructs to behavior are (1) to tally, across participants and decision problems, the number of choices consistent with one predicted pattern of pairwise preferences; (2) to compare what most people choose in each decision problem against a predicted preference pattern; or (3) to enumerate the decision problems in which two experimental conditions generate a 1-sided significant difference in choice frequency 'consistent' with the theory. Although simple, these theoretical links are heuristics. They are subject to well-known reasoning fallacies, most notably the fallacy of sweeping generalization and the fallacy of composition. No amount of replication can alleviate these fallacies. On the contrary, reiterating logically inconsistent theoretical reasoning over and again across studies obfuscates science. As a case in point, we consider pairwise choices among simple lotteries and the hypotheses of overweighting or underweighting of small probabilities, as well as the description-experience gap. We discuss ways to avoid reasoning fallacies in bridging the conceptual gap between hypothetical constructs, such as, for example, "overweighting" to observable pairwise choice data. Although replication is invaluable, successful replication of hard-to-interpret results is not. Behavioral decision research stands to gain much theoretical and empirical clarity by spelling out precise and formally explicit theories of how hypothetical constructs translate into observable behavior. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  16. Cross-country variation in additive effects of socio-economics, health behaviors, and comorbidities on subjective health of patients with diabetes.

    Science.gov (United States)

    Assari, Shervin

    2014-02-21

    This study explored cross-country differences in the additive effects of socio-economic characteristics, health behaviors and medical comorbidities on subjective health of patients with diabetes. The study analyzed data from the Research on Early Life and Aging Trends and Effects (RELATE). The participants were 9,179 adults with diabetes who were sampled from 15 countries (i.e. China, Costa Rica, Puerto Rico, United States, Mexico, Argentina, Barbados, Brazil, Chile, Cuba, Uruguay, India, Ghana, South Africa, and Russia). We fitted three logistic regressions to each country. Model I only included socio-economic characteristics (i.e. age, gender, education and income). In Model II, we also included health behaviors (i.e. smoking, drinking, and exercise). Model III included medical comorbidities (i.e. hypertension, respiratory disease, heart disease, stroke, and arthritis), in addition to the previous blocks. Our models suggested cross-country differences in the additive effects of socio-economic characteristics, health behaviors and comorbidities on perceived health of patients with diabetes. Comorbid heart disease was the only condition that was consistently associated with poor subjective health regardless of country. Countries show different profiles of social and behavioral determinants of subjective health among patients with diabetes. Our study suggests that universal programs that assume that determinants of well-being are similar across different countries may be over-simplistic. Thus instead of universal programs that use one protocol for health promotion of patients in all countries, locally designed interventions should be implemented in each country.

  17. Risk for Researchers Studying Social Deviance or Criminal Behavior

    Directory of Open Access Journals (Sweden)

    Patricia L. Brougham

    2017-10-01

    Full Text Available Abstract: Researchers often encounter dangerous situations while conducting social research. The concept of risk to researchers refers to the possible harm that may occur to researchers while in the field or after leaving a research project. This study explores issues experienced by social scientists engaged in research on social deviance or criminal behavior. The goal of this research was to discover the types of risk experienced by social scientists and any mediating factors affecting the experience of risk. An online survey was conducted to gather data on issues experienced by social scientists. This study found that researchers experienced a variety of risks within the categories of physical/health, emotional, legal, and personal/professional. Each of the survey options for risk were reported by at least one respondent; however, the greatest number of risks reported were of an emotional or personal/professional nature. There were no mediating factors found to be significant in relation to the experience of risk. This was a surprising finding especially for the variable of gender as it is suggested that gender plays a role in the experience of difficulties.

  18. The Applied Behavior Analysis Research Paradigm and Single-Subject Designs in Adapted Physical Activity Research.

    Science.gov (United States)

    Haegele, Justin A; Hodge, Samuel Russell

    2015-10-01

    There are basic philosophical and paradigmatic assumptions that guide scholarly research endeavors, including the methods used and the types of questions asked. Through this article, kinesiology faculty and students with interests in adapted physical activity are encouraged to understand the basic assumptions of applied behavior analysis (ABA) methodology for conducting, analyzing, and presenting research of high quality in this paradigm. The purposes of this viewpoint paper are to present information fundamental to understanding the assumptions undergirding research methodology in ABA, describe key aspects of single-subject research designs, and discuss common research designs and data-analysis strategies used in single-subject studies.

  19. Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures

    Energy Technology Data Exchange (ETDEWEB)

    Zargarian, A.; Esfahanian, M. [Department of Mechanical Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of); Kadkhodapour, J., E-mail: j.kad@srttu.edu [Department of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran (Iran, Islamic Republic of); Institute for Materials Testing, Materials Science and Strength of Materials (IMWF), University of Stuttgart, Stuttgart (Germany); Ziaei-Rad, S. [Department of Mechanical Engineering, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2016-03-01

    In this paper, the effects of cell geometry and relative density on the high-cycle fatigue behavior of Titanium scaffolds produced by selective laser melting and electron beam melting techniques were numerically investigated by finite element analysis. The regular titanium lattice samples with three different unit cell geometries, namely, diamond, rhombic dodecahedron and truncated cuboctahedron, and the relative density range of 0.1–0.3 were analyzed under uniaxial cyclic compressive loading. A failure event based algorithm was employed to simulate fatigue failure in the cellular material. Stress-life approach was used to model fatigue failure of both bulk (struts) and cellular material. The predicted fatigue life and the damage pattern of all three structures were found to be in good agreement with the experimental fatigue investigations published in the literature. The results also showed that the relationship between fatigue strength and cycles to failure obeyed the power law. The coefficient of power function was shown to depend on relative density, geometry and fatigue properties of the bulk material while the exponent was only dependent on the fatigue behavior of the bulk material. The results also indicated the failure surface at an angle of 45° to the loading direction. - Highlights: • Numerical simulation was used to predict fatigue behavior of titanium scaffolds. • Good agreement between numerical and experimental results • S–N curves obeyed the power law. • Fatigue strength of scaffolds was proportional to their Young's modulus. • Failure surface of scaffolds was inclined at an angle of 45° to loading.

  20. Effect of Ca and Y additions on oxidation behavior of magnesium alloys at high temperatures

    Institute of Scientific and Technical Information of China (English)

    FAN Jianfeng; YANG Changlin; XU Bingshe

    2012-01-01

    Oxidation and ignition of magnesium alloys at elevated temperature were successfully retarded by additions of Y and Ca.which could be melted at 1173 K in air without any protection.Thermogravimetric measurements in dry air revealed that the oxidation dynamics curves of Mg-2.5Ca alloy and Mg-3.5Y-0.79Ca alloy at high temperatures followed the parabolic-line law or the ubic-line law.X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis indicated that the oxide film on the surface of Mg-3.5Y-0.79Ca and Mg-2.5Ca alloys exhibited a duplex structure.which agreed with the results of thermodynamic analysis.By comparison,the ignition-proof effect of the combination addition of Y and Ca was better than that of the single addition of Ca.

  1. Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures.

    Science.gov (United States)

    Zargarian, A; Esfahanian, M; Kadkhodapour, J; Ziaei-Rad, S

    2016-03-01

    In this paper, the effects of cell geometry and relative density on the high-cycle fatigue behavior of Titanium scaffolds produced by selective laser melting and electron beam melting techniques were numerically investigated by finite element analysis. The regular titanium lattice samples with three different unit cell geometries, namely, diamond, rhombic dodecahedron and truncated cuboctahedron, and the relative density range of 0.1-0.3 were analyzed under uniaxial cyclic compressive loading. A failure event based algorithm was employed to simulate fatigue failure in the cellular material. Stress-life approach was used to model fatigue failure of both bulk (struts) and cellular material. The predicted fatigue life and the damage pattern of all three structures were found to be in good agreement with the experimental fatigue investigations published in the literature. The results also showed that the relationship between fatigue strength and cycles to failure obeyed the power law. The coefficient of power function was shown to depend on relative density, geometry and fatigue properties of the bulk material while the exponent was only dependent on the fatigue behavior of the bulk material. The results also indicated the failure surface at an angle of 45° to the loading direction. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Translational behavioral medicine for population and individual health: gaps, opportunities, and vision for practice-based translational behavior change research.

    Science.gov (United States)

    Ma, Jun; Lewis, Megan A; Smyth, Joshua M

    2018-04-12

    In this commentary, we propose a vision for "practice-based translational behavior change research," which we define as clinical and public health practice-embedded research on the implementation, optimization, and fundamental mechanisms of behavioral interventions. This vision intends to be inclusive of important research elements for behavioral intervention development, testing, and implementation. We discuss important research gaps and conceptual and methodological advances in three key areas along the discovery (development) to delivery (implementation) continuum of evidence-based interventions to improve behavior and health that could help achieve our vision of practice-based translational behavior change research. We expect our proposed vision to be refined and evolve over time. Through highlighting critical gaps that can be addressed by integrating modern theoretical and methodological approaches across disciplines in behavioral medicine, we hope to inspire the development and funding of innovative research on more potent and implementable behavior change interventions for optimal population and individual health.

  3. BEHAVIORAL ECONOMICS AND THE NEED OF PSYCHOLOGY IN ECONOMIC RESEARCH

    Directory of Open Access Journals (Sweden)

    Andreea GRADINARU

    2014-06-01

    Full Text Available The turning point in economic science has now come, marked especially by triggering the biggest crisis since the Great Depression of '29-'33, has called into question the need to reconsider the status of economic science and finding ways in which it can increase its practical foundations. In the elaboration of this study I’ve took into account the fact that beyond any abstract, formal and mathematical model, economics is a science, having the man in its center. Furthermore, every economic process is based on the human being. But the way individuals behave does not follow precisely the pattern predicted by classical and neoclassical models, but most of the time they are making decisions under the influence of psychological factors. Starting from these assumptions I considered important to highlight a real need for psychology in economic research. Therefore, the aim of this work is exclusively theoretical meant to show that the study of psychological factors is necessary in economic research, because it allows a better explanation of the economic problems and lead to obtaining results closer to reality than those who only take into consideration economic factors. In this way I appealed to behavioral economics. This represents a new trend of economic thinking that reunites psychology with economy. The thing that I observed after finishing the study is that behavioral economics can increase the explanatory power of economics by providing more realistic psychological bases, because human behavior is not only the subject matter of economics but psychology too.

  4. Extraction and Analysis of Information Related to Research & Development Declared Under an Additional Protocol

    International Nuclear Information System (INIS)

    Idinger, J.; Labella, R.; Rialhe, A.; Teller, N.

    2015-01-01

    The additional protocol (AP) provides important tools to strengthen and improve the effectiveness and efficiency of the safeguards system. Safeguards are designed to verify that States comply with their international commitments not to use nuclear material or to engage in nuclear-related activities for the purpose of developing nuclear weapons or other nuclear explosive devices. Under an AP based on INFCIRC/540, a State must provide to the IAEA additional information about, and inspector access to, all parts of its nuclear fuel cycle. In addition, the State has to supply information about its nuclear fuel cycle-related research and development (R&D) activities. The majority of States declare their R&D activities under the AP Articles 2.a.(i), 2.a.(x), and 2.b.(i) as part of initial declarations and their annual updates under the AP. In order to verify consistency and completeness of information provided under the AP by States, the Agency has started to analyze declared R&D information by identifying interrelationships between States in different R&D areas relevant to safeguards. The paper outlines the quality of R&D information provided by States to the Agency, describes how the extraction and analysis of relevant declarations are currently carried out at the Agency and specifies what kinds of difficulties arise during evaluation in respect to cross-linking international projects and finding gaps in reporting. In addition, the paper tries to elaborate how the reporting quality of AP information with reference to R&D activities and the assessment process of R&D information could be improved. (author)

  5. Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, O.G. [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL (United States); Allison, P.G., E-mail: pallison@eng.ua.edu [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL (United States); Jordon, J.B.; Rodriguez, O.L. [Department of Mechanical Engineering, The University of Alabama, Tuscaloosa, AL (United States); Brewer, L.N. [Department of Metallurgical Engineering, The University of Alabama, Tuscaloosa, AL (United States); McClelland, Z. [US Army Corps of Engineers, Engineer Research and Development Center, Vicksburg, MS (United States); Whittington, W.R.; Francis, D. [Center of Advanced Vehicular Systems, Mississippi State University, Starkville, MS (United States); Su, J. [Aeroprobe Corporation, Christiansburg, VA (United States); Martens, R.L. [Central Analytical Facility, The University of Alabama, Tuscaloosa, AL (United States); Hardwick, N. [Aeroprobe Corporation, Christiansburg, VA (United States)

    2017-05-10

    Here we introduce a novel thermo-mechanical Solid State Additive Manufacturing (SSAM) process referred to as Additive Friction Stir (AFS) manufacturing that provides a new and alternative path to fusion-based additive manufacturing processes for developing fully-dense, near-net shape components with a refined-equiaxed grain morphology. This study is the first to investigate the beneficial grain refinement and densification produced by AFS in IN625 that results in advantageous mechanical properties (YS, UTS, εf) at both quasi-static and high strain rate. Electron Backscatter Diffraction (EBSD) observed grain refinement during the layer deposition in the AFS specimens, where the results identified fine equiaxed grain structures with even finer grain structures forming at the layer interfaces. The EBSD quantified grains as fine as 0.27 µm in these interface regions while the average grain size was approximately 1 µm. Additionally, this is the first study to report on the strain rate dependence of AFS IN625 through quasi-static (QS) (0.001/s) and high strain rate (HR) (1500/s) tensile experiments using a servo hydraulic frame and a direct tension-Kolsky bar, respectively, which captured both yield and ultimate tensile strengths increasing as strain rate increased. The HS results exhibited an approximately 200 MPa increase in engineering strength over the QS results, with the fracture surfaces at both strain rates aligned with the maximum shear plane and exhibiting localized microvoids.

  6. Laser-assisted nanoceramics reinforced polymer scaffolds for tissue engineering: additional heating and stem cells behavior

    Science.gov (United States)

    Shishkovsky, Igor; Scherbakov, Vladimir; Volchkov, Vladislav; Volova, Larisa

    2018-02-01

    The conditions of selective laser melting (SLM) of tissue engineering scaffolds affect cell response and must be engineered to support cell adhesion, proliferation, and differentiation. In the present study, the influence of additional heating during SLM process on stem cell viability near biopolymer matrix reinforced by nanoceramics additives was carried out. We used the biocompatible and bioresorbable polymers (polyetheretherketone /PEEK/ and polycaprolactone /PCL/) as a matrix and nano-oxide ceramics - TiO2, Al2O3, ZrO2, FexOy and/or hydroxyapatite as a basis of the additives. The rate of pure PEEK and PCL bio-resorption and in mixtures with nano oxides on the matrix was studied by the method of mass loss on bacteria of hydroxylase and enzyme complex. The stem cellular morphology, proliferative MMSC activity, and adhesion of the 2D and 3D nanocomposite matrices were the subjects of comparison. Medical potential of the SLS/M-fabricated nano-oxide ceramics after additional heating as the basis for tissue engineering scaffolds and cell targeting systems were discussed.

  7. Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing

    International Nuclear Information System (INIS)

    Rivera, O.G.; Allison, P.G.; Jordon, J.B.; Rodriguez, O.L.; Brewer, L.N.; McClelland, Z.; Whittington, W.R.; Francis, D.; Su, J.; Martens, R.L.; Hardwick, N.

    2017-01-01

    Here we introduce a novel thermo-mechanical Solid State Additive Manufacturing (SSAM) process referred to as Additive Friction Stir (AFS) manufacturing that provides a new and alternative path to fusion-based additive manufacturing processes for developing fully-dense, near-net shape components with a refined-equiaxed grain morphology. This study is the first to investigate the beneficial grain refinement and densification produced by AFS in IN625 that results in advantageous mechanical properties (YS, UTS, εf) at both quasi-static and high strain rate. Electron Backscatter Diffraction (EBSD) observed grain refinement during the layer deposition in the AFS specimens, where the results identified fine equiaxed grain structures with even finer grain structures forming at the layer interfaces. The EBSD quantified grains as fine as 0.27 µm in these interface regions while the average grain size was approximately 1 µm. Additionally, this is the first study to report on the strain rate dependence of AFS IN625 through quasi-static (QS) (0.001/s) and high strain rate (HR) (1500/s) tensile experiments using a servo hydraulic frame and a direct tension-Kolsky bar, respectively, which captured both yield and ultimate tensile strengths increasing as strain rate increased. The HS results exhibited an approximately 200 MPa increase in engineering strength over the QS results, with the fracture surfaces at both strain rates aligned with the maximum shear plane and exhibiting localized microvoids.

  8. Radioecological research on the behavior of actinides in the environment

    International Nuclear Information System (INIS)

    Schuettelkopf, H.; Pimpl, M.

    1983-01-01

    The results of the research program on ''Investigation of the physical and chemical environmental behavior of radionuclides characterized by a particular biological effectivenes - Pu, Am, Cm'' are presented. Analytical procedures for Pu, Am, and Cm were developed. The behavior of Pu in the environment has been studied. Releases, dispersion, deposition, transport in soil, transfer to animals, dilution in a river and sedimentation were measured using Pu from nuclear weapon fallout and Pu release of Karlsruhe Nuclear Fuel Reprocessing Plant. The distribution coefficients and the availability of Pu, Am, and Cm in soil were determined. A greenhouse strated its operation during the last months. The transfer factors for Pu, Am, and Cm will be determined for 15 to 20 food plants, and different types of soil. (orig./DG)

  9. Shear and Rapeseed Oil Addition Affect the Crystal Polymorphic Behavior of Milk Fat

    DEFF Research Database (Denmark)

    Kaufmann, Niels; Kirkensgaard, Jacob Judas Kain; Andersen, Ulf

    2013-01-01

    The effect of shear on the crystallization kinetics of anhydrous milk fat (AMF) and blends with 20 and 30 % w/w added rapeseed oil (RO) was studied. Pulse 1H NMR was used to follow the a to b0 polymorphic transition. The NMR method was confirmed and supported by SAXS/WAXS experiments. Samples were...... faster in the presence of RO allowing more room for the conformational changes to occur. Final SFC decreased with increasing RO content. Shear applied in 20 and 30 % blends caused the destruction of b0-related 3L structure leaving only 2L packing. In AMF and statically crystallized samples, both 3L and 2......L packing existed. Shear did not affect the amount of b crystals formed. The study shows that both shear and RO affect the polymorphic behavior of milk fat, and that 1H NMR is able to detect polymorphic transition in blends with up to 30 % w/w RO....

  10. Compressive Strength and Physical Properties Behavior of Cement Mortars with addition of Cement Klin Dust

    Directory of Open Access Journals (Sweden)

    Auday A Mehatlaf

    2017-12-01

    Full Text Available Cement Klin Dust (CKD was the waste of almost cement industry factories, so that in this paper utilization of CKD as filler in cement and/or concrete was the main objective. CKD from the Karbala cement factory had been used and analysis to know the chemical composition of the oxides was done. In this paper cement mortars with different weight percentages of CKD (0,5,10,20,30,40 had been prepared. Physical properties such as density and porosity were done in different age curing (3, 7, 28 day. In addition, mechanical properties included the coefficient of thermal conductivity and compressive strength had also observed with different age (3,7, and 28 for all prepared specimens. From the obtained the experimental results and their discussion, it was clear that the addition (20% of CKD had the good results in cement mortars.  

  11. Citizen science: a new direction in canine behavior research.

    Science.gov (United States)

    Hecht, Julie; Spicer Rice, Eleanor

    2015-01-01

    Researchers increasingly rely on members of the public to contribute to scientific projects-from collecting or identifying, to analyzing and disseminating data. The "citizen science" model proves useful to many thematically distinctive fields, like ornithology, astronomy, and phenology. The recent formalization of citizen science projects addresses technical issues related to volunteer participation--like data quality--so that citizen scientists can make longstanding, meaningful contributions to scientific projects. Since the late 1990s, canine science research has relied with greater frequency on the participation of the general public, particularly dog owners. These researchers do not typically consider the methods and technical issues that those conducting citizen science projects embrace and continue to investigate. As more canine science studies rely on public input, an in-depth knowledge of the benefits and challenges of citizen science can help produce relevant, high-quality data while increasing the general public's understanding of canine behavior and cognition as well as the scientific process. We examine the benefits and challenges of current citizen science models in an effort to enhance canine citizen science project preparation, execution, and dissemination. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Conducting Online Behavioral Research Using Crowdsourcing Services in Japan.

    Science.gov (United States)

    Majima, Yoshimasa; Nishiyama, Kaoru; Nishihara, Aki; Hata, Ryosuke

    2017-01-01

    Recent research on human behavior has often collected empirical data from the online labor market, through a process known as crowdsourcing. As well as the United States and the major European countries, there are several crowdsourcing services in Japan. For research purpose, Amazon's Mechanical Turk (MTurk) is the widely used platform among those services. Previous validation studies have shown many commonalities between MTurk workers and participants from traditional samples based on not only personality but also performance on reasoning tasks. The present study aims to extend these findings to non-MTurk (i.e., Japanese) crowdsourcing samples in which workers have different ethnic backgrounds from those of MTurk. We conducted three surveys ( N = 426, 453, 167, respectively) designed to compare Japanese crowdsourcing workers and university students in terms of their demographics, personality traits, reasoning skills, and attention to instructions. The results generally align with previous studies and suggest that non-MTurk participants are also eligible for behavioral research. Furthermore, small screen devices are found to impair participants' attention to instructions. Several recommendations concerning this sample are presented.

  13. Social Media Research, Human Behavior, and Sustainable Society

    Directory of Open Access Journals (Sweden)

    Quan Li

    2017-03-01

    Full Text Available A bibliometric analysis was conducted to review social media research from different perspectives during the period of 2008–2014 based on the Science Citation Index and Social Science Citation Index database. Using a collection of 10,042 articles related to social media, the bibliometric analysis revealed some interesting patterns and trend of the scientific outputs, major journals, subject categories, spatial distribution, international collaboration, and temporal evolution in keywords usage in social media studies. The research on social media has been characterized by rapid growth and dynamic collaboration, with a rising number of publications and citation. Communication, Sociology, Public, Environment & Occupational Health, Business, and Multidisciplinary Psychology were the five most common categories. Computers in Human Behavior was the journal with the most social media publications, and Computers & Education ranked first according to the average citations. The two most productive countries were the U.S. and UK, delivering about half of the publications. The proportion of China’s internationally collaborative publications was the highest. The University of Wisconsin, the University of Michigan, and Harvard University were three most productive institutions. Several keywords, such as “Facebook”, “Twitter”, “communication”, “Social Networking Sites”, “China”, “climate change”, “big data” and “social support” increasingly gained the popularity during the study period, indicating the research trends on human behavior and sustainability.

  14. [Research strategies for feed additives and veterinary medicines from side products of Chinese medicine resources industrialization].

    Science.gov (United States)

    Zhao, Ming; Duan, Jin-Ao; Zhang, Sen; Guo, Sheng; Su, Shu-Lan; Wu, Qi-Nan; Tang, Yu-Ping; Zeng, Jian-Guo

    2017-09-01

    The global antimicrobial resistance has been a big challenge to the human health for years. It has to make balance between the safety of animal products and the use of antimicrobials in animal husbandry. Any methods that can minimize or even phase out the use of antimicrobials in animal husbandry should be encouraged. We herein describe the research strategies for feed additives and veterinary medicines from the side products of Chinese medicine resources industrialization. Killing two birds with one stone-besides the major purposes, the rational utilization of non-medicinal parts and wastes of industrialization of Chinese herbal medicines is also achieved under the proposed strategies. Copyright© by the Chinese Pharmaceutical Association.

  15. Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions

    International Nuclear Information System (INIS)

    Zhilyaev, A.P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M.T.

    2011-01-01

    Research highlights: → We analyze the influence of Nb additions on the shear-induced α → ω → β phase transformations in pure Zr by high pressure torsion (HPT). → Nb reduces the transition pressures and increases the transformation kinetics. → High pressure phases are retained under ambient conditions due to the presence of an internal stress. → Post-HPT annealing allows to fabricate bimodal/biphase nanostructures with enhanced mechanical behavior. - Abstract: This paper analyzes the influence of Nb on the shear-induced α → ω → β transformation taking place when processing Zr by high pressure torsion (HPT) under suitable conditions of pressure and shear. With that purpose, pure Zr and Zr-2.5%Nb were processed by HPT at room temperature and at pressures ranging from 0.25 to 6 GPa using 5 anvil turns. Nb causes a further reduction of the transition pressures, which are already lower when applying shear besides pressure. Thus, the transition pressure to the β phase is reduced at least 100 times in the Zr-Nb alloy. Alloying with Nb decreases the grain size of the transformed phases, significantly enhances their thermal stability and increases their UTS and elongation to failure. Selected post-HPT annealing treatments lead to the development of very tough, multiphase Zr and Zr-Nb with bimodal grain size distributions. The retention of the high pressure phases under ambient conditions is explained by the development of a high internal stress during processing. This stress is measured by synchrotron radiation diffraction at HZB-BESSY II. It is proposed that the presence of Nb reduces the internal stress level required for the retention of the high pressure phases.

  16. The psychological behaviorism theory of pain and the placebo: its principles and results of research application.

    Science.gov (United States)

    Staats, Peter S; Hekmat, Hamid; Staats, Arthur W

    2004-01-01

    The psychological behaviorism theory of pain unifies biological, behavioral, and cognitive-behavioral theories of pain and facilitates development of a common vocabulary for pain research across disciplines. Pain investigation proceeds in seven interacting realms: basic biology, conditioned learning, language cognition, personality differences, pain behavior, the social environment, and emotions. Because pain is an emotional response, examining the bidirectional impact of emotion is pivotal to understanding pain. Emotion influences each of the other areas of interest and causes the impact of each factor to amplify or diminish in an additive fashion. Research based on this theory of pain has revealed the ameliorating impact on pain of (1) improving mood by engaging in pleasant sexual fantasies, (2) reducing anxiety, and (3) reducing anger through various techniques. Application of the theory to therapy improved the results of treatment of osteoarthritic pain. The psychological behaviorism theory of the placebo considers the placebo a stimulus conditioned to elicit a positive emotional response. This response is most powerful if it is elicited by conditioned language. Research based on this theory of the placebo that pain is ameliorated by a placebo suggestion and augmented by a nocebo suggestion and that pain sensitivity and pain anxiety increase susceptibility to a placebo.

  17. Various aspects of research of the SI engine with an additional expansion process

    Directory of Open Access Journals (Sweden)

    Noga Marcin

    2017-01-01

    Full Text Available The paper presents an analysis of the results of the both experimental results and theoretical works on the SI engine with additional expansion of exhaust gases, also known as five-stroke engine. The engine like this was constructed at Cracow University of Technology as a retrofitted in-line four cylinder engine in which outer cylinders (1st and 4th work as fired cylinders and inner cylinders (2nd and 3rd work as volume for the additional expansion. The aim of development of such an engine is to gain higher energy recovery ratio of the combusted fuel through the second expansion of exhaust in a separate cylinder. The operating parameters of the engine in various versions were analyzed: as naturally aspirated, supercharged using a turbocharger with a waste-gate valve and a turbocharger with variable nozzle turbine. Selected results of the indicating measurements of the engine with special emphasis on the indicated thermal efficiency were presented. The results pointed out the directions of further optimization of the engine. These results are all the more important, because according to the author’s knowledge, the research on the real object of this type are carried out in only one science center in the world besides Cracow University of Technology.

  18. Systematic behavior research for understanding consumer decision making.

    Science.gov (United States)

    Lin, Chin-Feng

    2009-05-01

    This study incorporates means-end chain (MEC) theory and dynamic programming for understanding the implications of consumer decision making. The conceptual framework of this study can help programmers design information systems for analyzing consumption behaviors. Such analyses will provide marketers with meaningful information for formulating marketing strategies. The main contributions of this article are as follows: (1) to enable researchers to obtain information for consumer cognitive hierarchies utilizing an information system, (2) to enhance the functions of traditional MEC methodology and provide an integrated method for analyzing consumption information, and (3) to construct an information system for analyzing consumer decision-making processes.

  19. The Research Comment on Organic Food Consumer Behavior

    Institute of Scientific and Technical Information of China (English)

    Jin; WANG; Pengcheng; LIU

    2014-01-01

    Since the development of organic food,to a great extent,depends on the needs of consumers,the studies on the consumer behavior of organic food would have far-reaching significance to the development of the whole organic food industry. The recent studies in this field mainly include the following four aspects: the consumers’ recognition of organic food; the consumers’ attitude towards organic food; the consumers’ purchase of organic food; the consumers’ willingness to pay. The paper would review the recent domestic and foreign studies on the four aspects mentioned above,aiming to provide references to the researches in this field.

  20. Research regarding the managers’ behavior towards employees within sports organizations

    Directory of Open Access Journals (Sweden)

    Paul F. DRAGOȘ

    2017-03-01

    Full Text Available Starting from the definitions found in the literature, according to which the management is strictly related to the manner in which managers behave and act in their relationship with the employees and to the manner in which their behavior can influence the subordinates’ motivation, the conducted research wishes to establish the presence of these elements in the daily activities and their role increasing performance within sports organizations. Therefore, based on the analysis of the data gathered through the survey, a series of action plans can be outlined for the improvement of the work relationships at the level of managers and employees.

  1. Dynamic tensile behavior of electron beam additive manufactured Ti6Al4V

    International Nuclear Information System (INIS)

    Rodriguez, O.L.; Allison, P.G.; Whittington, W.R.; Francis, D.K.; Rivera, O.G.; Chou, K.; Gong, X.; Butler, T.M.; Burroughs, J.F.

    2015-01-01

    High rate and quasi-static tensile experiments examined strain rate dependence on flow stress and strain hardening of additive manufactured Ti6Al4V. Variations on strain-hardening coefficient indicate that the rate of thermal softening is greater than strain hardening during plastic deformation. Strain rate sensitivity calculations within the plastic strain regime suggest changes in deformation mechanisms. Fractography revealed cup-and-cone fracture for quasi-static samples and shear mechanisms for high rate samples. As-deposited microstructure consisted of bimodal α+β with the presence of secondary martensitic phase

  2. Dynamic tensile behavior of electron beam additive manufactured Ti6Al4V

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, O.L. [Department of Mechanical Engineering, University of Alabama, Tuscaloosa, AL 35487 (United States); Allison, P.G., E-mail: pallison@eng.ua.edu [Department of Mechanical Engineering, University of Alabama, Tuscaloosa, AL 35487 (United States); Whittington, W.R.; Francis, D.K. [Department of Mechanical Engineering, Mississippi State University, Starkville, MS 35759 (United States); Rivera, O.G.; Chou, K.; Gong, X. [Department of Mechanical Engineering, University of Alabama, Tuscaloosa, AL 35487 (United States); Butler, T.M. [Department of Metallurgical Engineering, University of Alabama, Tuscaloosa, AL 35487 (United States); Burroughs, J.F. [Geotechnical & Structures Laboratory, US Army ERDC, Vicksburg, MS 39180 (United States)

    2015-08-12

    High rate and quasi-static tensile experiments examined strain rate dependence on flow stress and strain hardening of additive manufactured Ti6Al4V. Variations on strain-hardening coefficient indicate that the rate of thermal softening is greater than strain hardening during plastic deformation. Strain rate sensitivity calculations within the plastic strain regime suggest changes in deformation mechanisms. Fractography revealed cup-and-cone fracture for quasi-static samples and shear mechanisms for high rate samples. As-deposited microstructure consisted of bimodal α+β with the presence of secondary martensitic phase.

  3. Effects of Mn addition on the microstructure and indentation creep behavior of the hot dip Zn coating

    International Nuclear Information System (INIS)

    Wang, Youbin; Zeng, Jianmin

    2015-01-01

    Highlights: • Mn addition could significantly refine the grain of the Zn coating. • Twins could be observed in the Zn coatings. • The stress exponent of the Zn coating increases with Mn addition. • The creep process of the Zn coating is dominated by dislocation climb and twins. - Abstract: The Zn coatings with different Mn additions were prepared by hot dip process, and the effects of the Mn addition on the microstructure and indentation creep behavior of the coatings were investigated through scanning electron microscope and constant-load holding indentation technique at the room temperature. Some twins can be observed in the microstructure of Zn coating, which may account for the formation of the large thermal misfit stress between the zinc coating and the steel substrate. The amount of twin microstructure in the Zn coating decreases with the Mn addition. It is also found that Mn addition could induce MnZn 13 phases to precipitate along the grain boundary and significantly refine the grains of Zn coatings. The steady-state stress of the Zn coating could be improved by Mn addition. The creep stress exponent values are in the range of 14–46 and increases with Mn addition. The creep process of the Zn coating is dominated by dislocation climb and twin formation

  4. Effect of Sn addition on the microstructure and deformation behavior of Mg-3Al alloy

    International Nuclear Information System (INIS)

    Suh, Byeong-Chan; Kim, Jae H.; Bae, Jun Ho; Hwang, Ji Hyun; Shim, Myeong-Shik; Kim, Nack J.

    2017-01-01

    Mg alloys generally suffer from their poor formability at low temperatures due to their strong basal texture and a lack of adequate deformation systems. In the present study, a small amount of Sn was added instead of Zn to Mg-3Al alloy to modify its deformation behavior and improve the stretch formability. Microstructural examinations of the deformed Mg-3Al-1Sn (AT31) alloy by electron backscatter diffraction and transmission electron microscopy show that prismatic slip is quite active during deformation, resulting in much lower r-values and planar anisotropy than the counterpart Mg-3Al-1Zn (AZ31) alloy. Polycrystal plasticity simulation based on visco-plasticity self-consistent (VPSC) model also shows that prismatic slip is the dominant deformation mode in AT31 alloy besides basal slip. As a consequence, AT31 alloy shows a much higher stretch formability than AZ31 alloy. On the other hand, AZ31 alloy shows the development of intense shear bands during stretch forming, and these shear bands act as crack propagating paths, limiting the stretch formability of AZ31 alloy.

  5. Long-term bedrock behavior research for soft rock

    International Nuclear Information System (INIS)

    Inoue, Hiroyuki; Noda, Kenji

    2002-02-01

    When a formation disposal system is thought about, it is important to evaluate long-term dynamics behavior of boundary condition and near field bedrock of an artificial barrier adequately. In this study, three matters were executed for improvement of a dependability of the evaluation as follows. (1) Creep test was executed as purpose by dependability improvement of evaluation technique of creep problem by Okubo model. Okubo model constant was calculated than the unconfined compression test which let strain rate change with true rock, and the creep test which the constant was used, and estimated breaking time was done. As a result, the estimation of breaking time by Okubo model almost suffered according to the estimation although a variation of test-piece influenced it. (2) A tunnel model apparatus was produced in the purpose which grasped near field bedrock behavior, and it was tested. Simulation rock test body of 1 m * 1 m * 0.5 m was used for a test, and 15 cm tunnel excavation was carried out in an initial stress bottom. Quantities of inner space displacement were measured in a test, and a hardness-test was done after dismantlement, and looseness area was grasped quantitatively. As a result, the looseness area was able to be estimated with about 17.5 cm than tunnel center position. (3) A test approach in deep underground laboratory was examined, and examination/the in situ test which took advantage of rock core analysis/borehole as purpose and done examination item by grip of long-term bedrock behavior (a bord is taken advantage of, and bord itself is used) was shown. In addition, layout of the deep underground laboratory which carried out various tests about long-term behavior in 3 depth was shown. (author)

  6. Application of ionic liquids as an electrolyte additive on the electrochemical behavior of lead acid battery

    Energy Technology Data Exchange (ETDEWEB)

    Rezaei, Behzad; Mallakpour, Shadpour; Taki, Mahmood [Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran)

    2009-02-15

    Ionic liquids (ILs) belong to new branch of salts with unique properties which their applications have been increasing in electrochemical systems especially lithium-ion batteries. In the present work, for the first time, the effects of four ionic liquids as an electrolyte additive in battery's electrolyte were studied on the hydrogen and oxygen evolution overpotential and anodic layer formation on lead-antimony-tin grid alloy of lead acid battery. Cyclic and linear sweep voltammetric methods were used for this study in aqueous sulfuric acid solution. The morphology of grid surface after cyclic redox reaction was studied using scanning electron microscopy. The results show that most of added ionic liquids increase hydrogen overpotential and whereas they have no significant effect on oxygen overpotential. Furthermore ionic liquids increase antimony dissolution that might be related to interaction between Sb{sup 3+} and ionic liquids. Crystalline structure of PbSO{sub 4} layer changed with presence of ionic liquids and larger PbSO{sub 4} crystals were formed with some of them. These additives decrease the porosity of PbSO{sub 4} perm selective membrane layer at the surface of electrode. Also cyclic voltammogram on carbon-PbO paste electrode shows that with the presence of ionic liquids, oxidation and reduction peak current intensively increased. (author)

  7. Effect of TiC addition on surface oxidation behavior of SKD11 tool steel composites

    Science.gov (United States)

    Cho, Seungchan; Jo, Ilguk; Kim, Heebong; Kwon, Hyuk-Tae; Lee, Sang-Kwan; Lee, Sang-Bok

    2017-09-01

    Titanium carbide (TiC) reinforced tool steel matrix composites were successfully fabricated by a liquid pressing infiltration process and research was subsequently conducted to investigate the composites' oxidation resistance. The mass gain of the tested TiC-SKD11 composite held at 700 °C for 50 h in an air environment decreased by about 60%, versus that of the SKD11, which indicates improved oxidation resistance. Improved oxidation resistance of the TiC-SKD11 composite originates from uniformly reinforced TiC, with a phase transition to thermodynamically stable, volume-expanded TiO2.

  8. Sliding friction and wear behaviors of surface-coated natural serpentine mineral powders as lubricant additive

    International Nuclear Information System (INIS)

    Zhang Baosen; Xu Yi; Gao Fei; Shi Peijing; Xu Binshi; Wu Yixiong

    2011-01-01

    This work aims to investigate the friction and wear properties of surface-coated natural serpentine powders (SP) suspended in diesel engine oil using an Optimal SRV oscillating friction and wear tester. The worn surface was characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS). Results indicated that the additives can improve the wear resistance and decrease friction coefficient of carbon steel friction couples. The 0.5 wt% content of serpentine powders is found most efficient in reducing friction and wear at the load of 50 N. The SEM and XPS analysis results demonstrate that a tribofilm forms on the worn surface, which is responsible for the decrease in friction and wear, mainly with iron oxides, silicon oxides, graphite and organic compounds.

  9. Effect of additional minor elements on accumulation behavior of point defects under electron irradiation in austenitic stainless steels

    International Nuclear Information System (INIS)

    Sekio, Yoshihiro; Yamashita, Shinichiro; Takahashi, Heishichiro; Sakaguchi, Norihito

    2014-01-01

    Addition of minor elements to a base alloy is often applied with the aim of mitigating void swelling by decreasing the vacancy diffusivity and flux which influence vacancy accumulation behavior. However, the comparative evaluations of parameters, such as the diffusivity and flux, between a base alloy and modified alloys with specific additives have not been studied in detail. In this study, type 316 austenitic stainless steel as a base alloy and type 316 austenitic stainless steels modified with vanadium (V) or zirconium (Zr) additions were used to perform evaluations from the changes of widths of the void denuded zone (VDZ) formed near a random grain boundary during electron irradiation because these widths depend on vacancy diffusivity and flux. The formations of VDZs were observed in in-situ observations during electron irradiation at 723 K and the formed VDZ widths were measured from the transmission electron microscopic images after electron irradiation. As a result, the VDZs were formed in both steels without and with V, and respective widths were ∼119 and ∼100 nm. On the other hand, the VDZ formation was not observed clearly in the steel with Zr. From the measured VDZ widths in the steels without and with V addition, the estimated ratio of the vacancy diffusivity in the steel with V to that in the steel without V was about 0.50 and the estimated ratio of the vacancy flux in the steel with V to that in the steel without V was about 0.71. This result suggests that the effect of additional minor elements on vacancy accumulation behaviors under electron irradiation could be estimated from evaluations of the VDZ width changes among steels with and without minor elements. Especially, because void swelling is closely related with the vacancy diffusion process, the VDZ width changes would also be reflected on void swelling behavior. (author)

  10. Behavioral Recommendations in Health Research News as Cues to Action: Self-Relevancy and Self-Efficacy Processes.

    Science.gov (United States)

    Chang, Chingching

    2016-08-01

    This study argues that behavioral recommendations in health news function as cues to action. A proposed self-oriented model seeks to explore the impacts of behavioral recommendations in health research news as cues to action through their influences on self-relevancy and self-efficacy. A content analysis (Study 1) first establishes that health research news commonly features behavioral recommendations. A message experiment (Study 2) then explores the utility of behavioral recommendations as cues to action by demonstrating a self-relevancy effect: Health research news with, as opposed to without, behavioral recommendations increases the self-relevancy of advocated health behaviors, which then improve people's attitudes toward and intentions to adopt those behaviors. A second message experiment (Study 3) tests whether varying presentations of behavioral recommendations alter their effectiveness as cues to action and thus people's behavioral intentions through a dual effect process. In addition to the previously demonstrated self-relevancy effect, this experiment shows that concrete, as opposed to abstract, behavioral recommendations trigger a self-efficacy effect, increasing perceived self-efficacy and further improving behavioral intentions.

  11. Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores

    Science.gov (United States)

    Turner, Andrew J.; Al Rifaie, Mohammed; Mian, Ahsan; Srinivasan, Raghavan

    2018-05-01

    Sandwich panel structures are widely used in aerospace, marine, and automotive applications because of their high flexural stiffness, strength-to-weight ratio, good vibration damping, and low through-thickness thermal conductivity. These structures consist of solid face sheets and low-density cellular core structures, which are traditionally based upon honeycomb folded-sheet topologies. The recent advances in additive manufacturing (AM) or 3D printing process allow lattice core configurations to be designed with improved mechanical properties. In this work, the sandwich core is comprised of lattice truss structures (LTS). Two different LTS designs are 3D-printed using acrylonitrile butadiene styrene (ABS) and are tested under low-velocity impact loads. The absorption energy and the failure mechanisms of lattice cells under such loads are investigated. The differences in energy-absorption capabilities are captured by integrating the load-displacement curve found from the impact response. It is observed that selective placement of vertical support struts in the unit-cell results in an increase in the absorption energy of the sandwich panels.

  12. Effects of niobium addition on microstructure and tensile behavior of as-cast ductile iron

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiangru, E-mail: cxr16@shu.edu.cn [State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China); Xu, Jie, E-mail: shuxujie@163.com [State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China); Hu, Henry, E-mail: huh@uwindsor.ca [Department of Mechanical, Automotive and Materials Engineering University of Windsor, 401 Sunset Avenue, Windsor, Ontario, Canada N9B 3P4 (Canada); Mohrbacher, Hardy, E-mail: hm@niobelcon.net [NiobelCon bvba, Swaenebeecklaan, 2970 Schilde (Belgium); Kang, Ming, E-mail: kangming@dfcv.com.cn [Dongfeng Commercial Vehicle Co., Ltd., Wuhan 430056 (China); Zhang, Wei, E-mail: zhangwei3@citic.com [CITIC Metal Co., Ltd., Beijing 100004 (China); Guo, Aimin, E-mail: guoam@citic.com [CITIC Metal Co., Ltd., Beijing 100004 (China); Zhai, Qijie, E-mail: qjzhai@shu.edu.cn [State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China)

    2017-03-14

    The effects of niobium addition up to 0.11 wt% on the microstructure and tensile properties of as-cast ductile iron (ACDI) were investigated. Metallographic analyses by both optical microscopy (OM) and scanning electron microscopy (SEM) indicated that niobium (Nb) promoted the formation of pearlite, reduced pearlite lamellar spacing and decreased the extent of graphitization taking place in the Nb-alloyed ACDI. The nodularity and nodule counts of graphite changed insignificantly when the Nb content was less than 0.08 wt% in the ACDI. The analysis of precipitates by transmission electron microscopy (TEM) revealed that nano and micro sized (Nb, Ti)C carbides acted as nucleation site for graphites, and promoted the formation of large graphite nodules with low roundnesses as Nb content rose above 0.08 wt%. The results of tensile testing showed that the yield strength, ultimate tensile strength and elongation of the ACDI with 0.08 wt% Nb increased by 12.1%, 11.2% and 14.3% over those of the Nb-free ACDI, respectively. The optimum values of the yield strength, tensile strength and elongation of the Nb-alloyed ACDI were found to be 418 MPa, 746.0 MPa and 8.0%, respectively, at the Nb content of 0.08 wt%. The high strain hardening rates of the Nb-containing ACDIs implied that they were capable of spontaneously strengthening itself increasingly to a large extent, in response to a slight plastic deformation after yielding.

  13. Low-Velocity Impact Behavior of Sandwich Structures with Additively Manufactured Polymer Lattice Cores

    Science.gov (United States)

    Turner, Andrew J.; Al Rifaie, Mohammed; Mian, Ahsan; Srinivasan, Raghavan

    2018-04-01

    Sandwich panel structures are widely used in aerospace, marine, and automotive applications because of their high flexural stiffness, strength-to-weight ratio, good vibration damping, and low through-thickness thermal conductivity. These structures consist of solid face sheets and low-density cellular core structures, which are traditionally based upon honeycomb folded-sheet topologies. The recent advances in additive manufacturing (AM) or 3D printing process allow lattice core configurations to be designed with improved mechanical properties. In this work, the sandwich core is comprised of lattice truss structures (LTS). Two different LTS designs are 3D-printed using acrylonitrile butadiene styrene (ABS) and are tested under low-velocity impact loads. The absorption energy and the failure mechanisms of lattice cells under such loads are investigated. The differences in energy-absorption capabilities are captured by integrating the load-displacement curve found from the impact response. It is observed that selective placement of vertical support struts in the unit-cell results in an increase in the absorption energy of the sandwich panels.

  14. Scientific familial lessons in ingestive behavior research: 2016 Alan N. Epstein research award.

    Science.gov (United States)

    Hayes, Matthew R

    2017-07-01

    While energy balance is under the control of the central nervous system (CNS), a major source of neural regulation for the behavioral, physiological and endocrine processes governing energy balance originates in the periphery. Indeed, the organs of the gastrointestinal (GI) tract, supporting organs of the peritoneal cavity and adipose tissue are the source of numerous neurotransmitter and neuroendocrine signals released from non-neuronal peripheral tissue that signal in a paracrine and endocrine fashion to regulate the physiological and behavioral processes that affect energy balance. Given the ever increasing appreciation that chronic hyperphagia of highly-palatable/rewarding food is a major contributing factor to the obesity epidemic, it is not surprising that the field has increased research efforts focusing on understanding what role peripherally-derived neuroendocrine signals play in modulating food reward and motivated behaviors. Research throughout my career has focused on understanding gut-to-brain communication of relevance to energy balance control. Through very fortuitous opportunities and amazing collaborations, my research program has also expanded widely to include analyses of multiple GI-, pancreatic- and adipose tissue-derived anorectic signals involved in food intake and energy balance control, as well as analyses of higher-order determinants of food reward, nausea, aversion and maladaptive motivated behaviors. I am honored to be the recipient of the 2016 Alan N. Epstein Research Award from the Society for the Study of Ingestive Behavior, and express much appreciation for the amazing collaborations I have had with my mentors, colleagues and trainees. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Structural changes in latosols of the cerrado region: II - soil compressive behavior and modeling of additional compaction

    Directory of Open Access Journals (Sweden)

    Eduardo da Costa Severiano

    2011-06-01

    Full Text Available Currently in Brazil, as in other parts of the world, the concern is great with the increase of degraded agricultural soil, which is mostly related to the occurrence of soil compaction. Although soil texture is recognized as a very important component in the soil compressive behaviors, there are few studies that quantify its influence on the structural changes of Latosols in the Brazilian Cerrado region. This study aimed to evaluate structural changes and the compressive behavior of Latosols in Rio Verde, Goiás, through the modeling of additional soil compaction. The study was carried out using five Latosols with very different textures, under different soil compaction levels. Water retention and soil compression curves, and bearing capacity models were determined from undisturbed samples collected on the B horizons. Results indicated that clayey and very clayey Latosols were more susceptible to compression than medium-textured soils. Soil compression curves at density values associate with edaphic functions were used to determine the beneficial pressure (σ b , i.e., pressure with optimal water retention, and critical pressure (σcrMAC, i.e., pressure with macroporosity below critical levels. These pressure values were higher than the preconsolidation pressure (σp, and therefore characterized as additional compaction. Based on the compressive behavior of these Latosols, it can be concluded that the combined preconsolidation pressure, beneficial pressure and critical pressure allow a better understanding of compression processes of Latosols.

  16. Effects of molybdenum dithiocarbamate and zinc dialkyl dithiophosphate additives on tribological behaviors of hydrogenated diamond-like carbon coatings

    International Nuclear Information System (INIS)

    Yue, Wen; Liu, Chunyue; Fu, Zhiqiang; Wang, Chengbiao; Huang, Haipeng; Liu, Jiajun

    2014-01-01

    Highlights: • For MoDTC, DLC coating showed better anti-friction and worse anti-wear behaviors. • The improved anti-friction property was due to graphitization and MoS 2 . • Formation of MoO x resulted in a high wear volume. • For ZDDP, DLC coating showed the best anti-wear and the worst anti-friction behaviors. • Absence of friction reducing product and graphitized layer resulted in a higher friction. - Abstract: The tribological behaviors of hydrogenated diamond-like carbon (DLC) coatings under varied load conditions lubricated with polyalpha olefin (PAO), molybdenum dithiocarbamate (MoDTC) and zinc dialkyl dithiophosphate (ZDDP) additives were investigated in this paper. Hydrogenated DLC coatings were synthesized through the decomposition of acetylene by the ion source. The tribological performances were measured on a SRV tribometer. The morphologies and chemical structures of the DLC coatings were investigated by the scanning electron microscope (SEM), Raman spectrometer (Raman) and X-ray photoelectron spectroscope (XPS). It was shown that the low friction and high wear were achieved on the hydrogenated DLC coating under MoDTC lubrication, while low wear was found on the hydrogenated DLC coating lubricated by ZDDP. The primary reason was attributed to different tribofilms formed on the contact area and the formation of graphitic layer. Both factors working together leaded to quite different tribological behaviors

  17. How to estimate the health benefits of additional research and changing clinical practice

    OpenAIRE

    Claxton, Karl; Griffin, Susan; Koffijberg, Hendrik; McKenna, Claire

    2015-01-01

    A simple extension of standard meta-analysis can provide quantitative estimates of the potential health benefits of further research and of implementing the findings of existing research, which can help inform research prioritisation and efforts to change clinical practice

  18. How to estimate the health benefits of additional research and changing clinical practice

    OpenAIRE

    Claxton, Karl; Griffin, Susan; Koffijberg, Hendrik; McKenna, Claire

    2015-01-01

    A simple extension of standard metaanalysis can provide quantitative estimates of the potential health benefits of further research and of implementing the findings of existing research, which can help inform research prioritisation and efforts to change clinical practice

  19. Promoting Positive Behavior Using the Good Behavior Game: A Meta-Analysis of Single-Case Research

    Science.gov (United States)

    Bowman-Perrott, Lisa; Burke, Mack D.; Zaini, Samar; Zhang, Nan; Vannest, Kimberly

    2016-01-01

    The Good Behavior Game (GBG) is a classroom management strategy that uses an interdependent group-oriented contingency to promote prosocial behavior and decrease problem behavior. This meta-analysis synthesized single-case research (SCR) on the GBG across 21 studies, representing 1,580 students in pre-kindergarten through Grade 12. The TauU effect…

  20. A Study of the Information Seeking Behavior of Communication Graduate Students in Their Research Processes

    Directory of Open Access Journals (Sweden)

    Shih-Chuan Chen

    2011-12-01

    Full Text Available Thesis is the research outcome that a graduate student spends most of his or her time and energies to achieve. Therefore, the research process of student’s thesis writing is an important topic to be investigated. The main purpose of this study is to explore graduate students’ information seeking behavior during the process of thesis writing. Ten graduate students in the field of communication were interviewed, and their information horizon maps as well as bibliographical references were analyzed also. Results showed that the library, as a formal channel, is the primary source for graduate students. The documents that they used most often were theses and dissertations, monographs, and journals. In addition to the formal channels, social network also played as a very important role in students’ research process. The networks even changed their information seeking behaviors in formal channels. Students reported several problems encountered in the research process, such as lacking of the background knowledge of the interdisciplinary, being unable to find out the core and relevant documents from the search results, etc. In conclusion, graduate students’ information seeking behavior changed at different stages in the research process. [Article content in Chinese

  1. 2010 Thin Film & Small Scale Mechanical Behavior Gordon Research Conference

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Thomas Balk

    2010-07-30

    Over the past decades, it has been well established that the mechanical behavior of materials changes when they are confined geometrically at least in one dimension to small scale. It is the aim of the 2010 Gordon Conference on 'Thin Film and Small Scale Mechanical Behavior' to discuss cutting-edge research on elastic, plastic and time-dependent deformation as well as degradation mechanisms like fracture, fatigue and wear at small scales. As in the past, the conference will benefit from contributions from fundamental studies of physical mechanisms linked to material science and engineering reaching towards application in modern applications ranging from optical and microelectronic devices and nano- or micro-electrical mechanical systems to devices for energy production and storage. The conference will feature entirely new testing methodologies and in situ measurements as well as recent progress in atomistic and micromechanical modeling. Particularly, emerging topics in the area of energy conversion and storage, such as material for batteries will be highlighted. The study of small-scale mechanical phenomena in systems related to energy production, conversion or storage offer an enticing opportunity to materials scientists, who can provide new insight and investigate these phenomena with methods that have not previously been exploited.

  2. Research on software behavior trust based on hierarchy evaluation

    Science.gov (United States)

    Long, Ke; Xu, Haishui

    2017-08-01

    In view of the correlation software behavior, we evaluate software behavior credibility from two levels of control flow and data flow. In control flow level, method of the software behavior of trace based on support vector machine (SVM) is proposed. In data flow level, behavioral evidence evaluation based on fuzzy decision analysis method is put forward.

  3. Oscillatory behavior of the magnetic properties of Nd–Fe–B films with Mo and Mo–Cu additions

    International Nuclear Information System (INIS)

    Urse, M.; Grigoras, M.; Lupu, N.; Borza, F.; Chiriac, H.

    2013-01-01

    A series of Ta/NdFeB/Ta thin films with Mo and Mo–Cu additions embedded by alloying and by stratification have been prepared by r.f. sputtering. The influence of additions, their embedding mode, and annealing temperature on the structural and magnetic behavior of Ta/NdFeB/Ta thin films is presented. The use of additions of Mo and Mo–Cu leads to refined grain structure and improvement in the hard magnetic characteristics of Ta/NdFeB/Ta thin films. The Ta/[NdFeBMo(540 nm)/Ta films and Ta/[NdFeB(180 nm)/MoCu(dnm)] × n/Ta multilayer films present enhanced coercivities and M r /M s ratios in comparison with the Ta/NdFeB(540 nm)/Ta films. The stratification of Ta/NdFeB/Ta thin films with Mo–Cu interlayers leads to an oscillatory behavior of hard magnetic characteristics of the Ta/[NdFeB(180 nm)/MoCu(dnm)] × n/Ta multilayer films, when the thickness, d, of Mo–Cu interlayers varies by increments of 1 nm. When the thickness of Mo–Cu interlayers varies by increments of 2 nm the oscillatory behavior of the magnetic characteristics is not revealed. For a thickness of the Mo–Cu interlayer of 3 nm in the Ta/[NdFeB(180 nm)/MoCu(3 nm)] × 3/Ta thin films annealed at 650 °C, the c-axis of part of the hard magnetic Nd 2 Fe 14 B grains is oriented out-of-plane

  4. Reactor core conversion studies of Ghana: Research Reactor-1 and proposal for addition of safety rod

    International Nuclear Information System (INIS)

    Odoi, H.C.

    2014-06-01

    The inclusion of an additional safety rod in conjunction with a core conversion study of Ghana Research Reactor-1 (GHARR-1) was carried out using neutronics, thermal hydraulics and burnup codes. The study is based on a recommendation by Integrated Safety Assessment for Research Reactors (INSARP) mission to incorporate a safety rod to the reactor safety system as well as the need to replace the reactor fuel with LEU. Conversion from one fuel type to another requires a complete re-evaluation of the safety analysis. Changes to the reactivity worth, shutdown margin, power density and material properties must be taken into account, and appropriate modifications made. Neutronics analysis including burnup was studied followed by thermal hydraulics analyses which comprise steady state and transients. Four computer codes were used for the analysis; MCNP, REBUS, PLTEP and PARET. The neutronics analysis revealed that the LEU core must be operated at 34 Kw in order to attain the flux of 1.0E12 n/cm 2 .s as the nominal flux of the HEU core. The auxiliary safety rod placed at a modified irradiation site gives a better worth than the cadmium capsules. For core excess reactivity of 4 mk, 348 fuel pins would be appropriate for the GHARR-1 LEU core. Results indicate that flux level of 1.0E12 n/cm 2 .s in the inner irradiation channel will not be compromised, if the power of the LEU core is increased to 34 kW. The GHARR-1 core using LEU-U0 2 -12.5% fuel can be operated for 23 shim cycles, with cycles length 2.5 years, for over 57 years at the 17 kW power level. All 23 LEU cycles meet the ∼ 4.0 mk excess reactivity required at the beginning of cycle . For comparison, the MNSR HEU reference core can also be operated for 23 shim cycles, but with a cycle length of 2.0 years for just over 46 years at 15.0kW power level. It is observed that the GHARR-1 core with LEU UO 2 fuel enriched to 12.5% and a power level of 34 kW can be operated ∼25% longer than the current HEU core operated at

  5. Social jetlag in health and behavioral research: a systematic review

    Directory of Open Access Journals (Sweden)

    Beauvalet JC

    2017-05-01

    Full Text Available Juliana Castilhos Beauvalet,1,2 Caroline Luísa Quiles,1,2 Melissa Alves Braga de Oliveira,1,2 Carlos Augusto Vieira Ilgenfritz,1 Maria Paz Loayza Hidalgo,1–3 André Comiran Tonon1 1Laboratório de Cronobiologia e Sono, Hospital de Clínicas de Porto Alegre (HCPA, Universidade Federal do Rio Grande do Sul (UFRGS, Porto Alegre, RS, Brazil; 2Postgraduate Program in Psychiatry and Behavioral Sciences, Medical School, Universidade Federal do Rio Grande do Sul (UFRGS, Porto Alegre, RS, Brazil; 3Department of Psychiatry and Forensic Medicine, Medical School, Universidade Federal do Rio Grande do Sul (UFRGS, Porto Alegre, RS, Brazil Background: Even though light is considered the main cue that entrains inner biological rhythms according to circadian environmental rhythms, social organizations have the capacity to take the body “out of sync”. An emergent field of research on the topic refers to what has been described as social jetlag, the biological misalignment that arises from alternated work and free days. However, to the present moment, there is still controversial evidence on the effects of such a phenomenon to human health.Objective: The aim of this study was to identify current peer-reviewed evidence of the health and behavioral risks associated with social jetlag.Method: We conducted a systematic review of the literature on PubMed, Scopus, Embase and LILACS electronic databases using the terms “social AND (jet lag OR jetlag”. The search was finalized on August 22, 2016, resulting in 26 research articles included in the review.Results and discussion: Our results point to a variety of health and behavioral outcomes that seem to be associated with the mismatch existent between work or study days and free days. They are epilepsy, minor psychiatric symptoms, aggression and conduct problems, mood disorders, cognitive impairment (eg, work and academic performance, substance use, cardiometabolic risk and adverse endocrine profiles

  6. Effect of Ge addition on mechanical properties and fracture behavior of Cu-Zr-Al bulk metallic glass

    International Nuclear Information System (INIS)

    Malekan, M.; Shabestari, S.G.; Gholamipour, R.; Seyedein, S.H.

    2009-01-01

    Effect of the addition of a small amount of Ge on mechanical properties and fracture behavior of Cu 50 Zr 43 Al 7 (at.%) bulk metallic glass were studied. The Cu 50 Zr 43 Al 7 alloy has a surprising glass-forming ability (GFA), and the glassy rods up to 4 mm in diameter can be formed. Partial addition of Ge causes the crystalline phases precipitate in the glassy matrix of (Cu 50 Zr 43 Al 7 ) 100-x Ge x (x = 0, 1, 2) rods with a diameter of 4 mm. In uniaxial compression, Cu 50 Zr 43 Al 7 bulk metallic glass exhibit high strength of 1692 MPa and very limited plasticity of 0.05%. When Ge increases from 0 to 2 at.%, the strength decreases, but plastic strain increases about 2.5%. Fracture surface and shear bands of samples were investigated by scanning electron microscopy (SEM).

  7. 75 FR 34277 - Federal Acquisition Regulation; FAR Case 2008-007, Additional Requirements for Market Research

    Science.gov (United States)

    2010-06-16

    ... executive agencies. Specifically, the head of the agency must conduct market research before issuing an... million for the procurement of items other than commercial items is required to conduct market research... 10 U.S.C. 2377(c), ``Preliminary Market Research'', to require the head of an agency to conduct...

  8. Constructing counterproductive behavior for supporting evironmental management system research

    Science.gov (United States)

    Tiarapuspa; Indyastuti, D. L.; Sari, W. R.

    2018-01-01

    This study aims to explore the definition of counterproductive behavior based on supervisors’ and sub ordinaries’ perceptions. Recently, environmental management system is a strategic tool to gain a competitive advantage. Human resource is the vital factor for successful environmental management system. Counterproductive behavior will destroy environmental management system. Unfortunately, the construct of counterproductive behavior is still debatable. Different culture show different dimensions and indicators of counterproductive behavior. The unclear construct results ambiguous empirical evidence. This study results that many items are included of counterproductive behavior, such as come late, impolite communication, playing gadget in working time, and the other negative behaviors.

  9. The Influence of Post-Build Microstructure on the Electrochemical Behavior of Additively Manufactured 17-4 PH Stainless Steel.

    Science.gov (United States)

    Stoudt, M R; Ricker, R E; Lass, E A; Levine, L E

    2017-03-01

    The additive manufacturing (AM) build process produces a segregated microstructure with significant variations in composition and phases that are uncommon in traditional wrought materials. As such, the relationship between the post-build microstructure and the corrosion resistance is not well understood. Stainless steel alloy 17-4PH is an industrially-relevant alloy for applications requiring high-strength and good corrosion resistance. A series of potentiodynamic scans conducted in a deaerated 0.5 mol/L NaCl solution evaluated the influence of these microstructural differences on the pitting behavior of SS17-4. The pitting potentials were found to be higher in the samples of additively-processed material than in samples of the alloy in wrought form. This indicates that the additively-processed material is more resistant to localized corrosion and pitting in this environment than the wrought alloy. The results also suggest that after homogenization, the additively-produced SS17-4 could be more resistant to pitting than wrought SS17-4 in an actual service environment.

  10. Implications of Attitude and Behavior Research for Environmental Conservation.

    Science.gov (United States)

    Newhouse, Nancy

    1990-01-01

    Discussed are the determinants of environmentally responsible behavior, the attitude-behavior discrepancy problem, how environmental attitudes are formed and changed, and the effects of individual differences on appropriateness of educational techniques. (CW)

  11. Online Behavioral Advertising: A Literature Review and Research Agenda

    NARCIS (Netherlands)

    Boerman, S.C.; Kruikemeier, S.; Zuiderveen Borgesius, F.J.

    2017-01-01

    Advertisers are increasingly monitoring people's online behavior and using the information collected to show people individually targeted advertisements. This phenomenon is called online behavioral advertising (OBA). Although advertisers can benefit from OBA, the practice also raises concerns about

  12. Customer engagement behavior : Theoretical foundations and research directions

    NARCIS (Netherlands)

    van Doorn, J.; Lemon, K.N.; Mittal, V.; Nass, S.; Pick, D.; Pirner, P.; Verhoef, P.C.

    This article develops and discusses the concept of customer engagement behaviors (CEB), which we define as the customers' behavioral manifestation toward a brand or firm, beyond purchase, resulting from motivational drivers. CEBs include a vast array of behaviors including word-of-mouth (WOM)

  13. Behavior-Analytic Research on Dementia in Older Adults

    Science.gov (United States)

    Trahan, Maranda A.; Kahng, SungWoo; Fisher, Alyssa B.; Hausman, Nicole L.

    2011-01-01

    It is estimated that 1 in 10 adults aged 65 years and older have been diagnosed with dementia, which is associated with numerous behavioral excesses and deficits. Despite the publication of a special section of the "Journal of Applied Behavior Analysis" ("JABA") on behavioral gerontology (Iwata, 1986), there continues to be a paucity of…

  14. Generalized requirements and decompositions for the design of test parts for micro additive manufacturing research

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Clemmensen, Line Katrine Harder

    2015-01-01

    The design of experimental test parts to characterize micro additive manufacturing (AM) processes is challenging due to the influence of the manufacturing and metrology processes. This work builds on the lessons learned from a case study in the literature to derive generalized requirements and high...... level decompositions for the design of test parts and the design of experiments to characterize micro additive manufacturing processes. While the test parts and the experiments described are still work in progress, the generic requirements derived from them can serve as a starting point for the design...... of other micro additive manufacturing related studies and their decompositions can help structure future work....

  15. 76 FR 14562 - Federal Acquisition Regulation; Additional Requirements for Market Research

    Science.gov (United States)

    2011-03-16

    ... and small disadvantaged business, should be exempt from market research requirements because the... subcontracting opportunities for small- business concerns. Careful attention to market-research strategies is an effective method for creating contract opportunities for small- business concerns. It provides them with an...

  16. Statement Summarizing Research Findings on the Issue of the Relationship Between Food-Additive-Free Diets and Hyperkinesis in Children.

    Science.gov (United States)

    Lipton, Morris; Wender, Esther

    The National Advisory Committee on Hyperkinesis and Food Additives paper summarized some research findings on the issue of the relationship between food-additive-free diets and hyperkinesis in children. Based on several challenge studies, it is concluded that the evidence generally refutes Dr. B. F. Feingold's claim that artificial colorings in…

  17. Effect of addition of tantalum and zirconium on the mechanical behavior of aluminum grain refined by Ti+ B

    International Nuclear Information System (INIS)

    Zaid, A.I.O.

    2003-01-01

    Aluminum and its alloys normally solidify in a columnar structure with coarse grains. Therefore, they are normally grain refined by adding either titanium or titanium + boron to their melts to obtain finer grain size and better surface quality. Other elements may be added beside the grain refiners to enhance their grain refinement efficiency and improve the mechanical behavior. Some elements were found to improve the grain refining efficiency of the master alloys e.g., vanadium, molybdenum, while others were found to deteriorate the grain refining efficiency e.g., zirconium and tantalum. The literature reveals that in general, only one element is added in the presence of the binary AI-Ti or the ternary AI-Ti-B grain refining master alloy. It is, therefore, anticipated that the addition of Ta and Zr may have different effect when added together from that if each element is added alone. This formed the main objective of this paper. In this paper, the effect of addition of either Zr, Ta or both of them together, with a percentage of 0.1 %wt each, on the grain size, hardness and mechanical behavior of AI and AI grain refined by Ti+B is investigated. It was found that adding Zr or Ta to commercially pure aluminum resulted in grain refinement of its structure and resulted in slight improvement of its hardness. However, a pronounced improvement was obtained in its mechanical strength and formability. On the other hand, addition of either Zr or Ta to Al grain refined by Ti+B resulted in poisoning effect i.e. reducing the grain refining efficiency of the AI- Ti-B master alloy. Practically, addition of either Zr or Ta has no effect on its hardness but resulted in a pronounced improvement of its mechanical strength. Finally, the addition of Zr + Ta to commercially pure aluminum or to aluminum grain refined by Ti+B resulted in reduction of grain size, little improvement in hardness and pronounced improvement in mechanical strength than when each element was added alone

  18. The Contributions of Applied Behavior Analysis and Behavior Theory to Innovative Research and Practice Cultures in Social Work.

    Science.gov (United States)

    Briggs, Harold Eugene; Sharkey, Caroline; Briggs, Adam Christopher

    2016-01-01

    In this article the authors tie the emergence of an empirical practice research culture, which enabled the rise in evidence-based practice in social work to the introduction of applied behavior analysis and behavioral theory to social work practice and research. The authors chronicle the: (1) scientific foundations of social work, (2) influence and push by corporatized university cultures for higher scholarship productivity among faculty, (3) significance of theory in general, (4) importance of behavioral theory in particular as a major trigger of the growth in research on effective social work practice approaches, and (5) commonalities between applied behavior analysis and evidence-based practice. The authors conclude with implications for addressing the dual challenges of building an enhanced research culture in schools of social work and the scholarship of transferring practice research to adoption in real world practice settings.

  19. Defining an additivity framework for mixture research in inducible whole-cell biosensors

    DEFF Research Database (Denmark)

    Martin-Betancor, K; Ritz, Christian; Fernández-Piñas, F

    2015-01-01

    A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts for differe......A novel additivity framework for mixture effect modelling in the context of whole cell inducible biosensors has been mathematically developed and implemented in R. The proposed method is a multivariate extension of the effective dose (EDp) concept. Specifically, the extension accounts...... for differential maximal effects among analytes and response inhibition beyond the maximum permissive concentrations. This allows a multivariate extension of Loewe additivity, enabling direct application in a biphasic dose-response framework. The proposed additivity definition was validated, and its applicability...... illustrated by studying the response of the cyanobacterial biosensor Synechococcus elongatus PCC 7942 pBG2120 to binary mixtures of Zn, Cu, Cd, Ag, Co and Hg. The novel method allowed by the first time to model complete dose-response profiles of an inducible whole cell biosensor to mixtures. In addition...

  20. Morphology Analysis and Process Research on Novel Metal Fused-coating Additive Manufacturing

    Science.gov (United States)

    Wang, Xin; Wei, Zheng ying; Du, Jun; Ren, Chuan qi; Zhang, Shan; Zhang, Zhitong; Bai, Hao

    2017-12-01

    Existing metal additive manufacturing equipment has high capital costs and slow throughput printing. In this paper, a new metal fused-coating additive manufacturing (MFCAM) was proposed. Experiments of single-track formation were conducted using MFCAM to validate the feasibility. The low melting alloy was selected as the forming material. Then, the effect of process parameters such as the flow rate, deposition velocity and initial distance on the forming morphology. There is a strong coupling effect between the single track forming morphology. Through the analysis of influencing factors to improve the forming quality of specimens. The experimental results show that the twice as forming efficiency as the metal droplet deposition. Additionally, the forming morphology and quality were analyzed by confocal laser scanning microscope and X-ray. The results show that the metal fused-coating process can achieve good surface morphology and without internal tissue defect.

  1. Characterization and Processing Behavior of Heated Aluminum-Polycarbonate Composite Build Plates for the FDM Additive Manufacturing Process

    Directory of Open Access Journals (Sweden)

    Sherri L. Messimer

    2018-02-01

    Full Text Available One of the most essential components of the fused deposition modeling (FDM additive manufacturing (AM process is the build plate, the surface upon which the part is constructed. These are typically made from aluminum or glass, but there are clear disadvantages to both and restrictions on which materials can be processed on them successfully. This study examined the suitability of heated aluminum-polycarbonate (AL-PC composite print beds for FDM, looking particularly at the mechanical properties, thermal behavior, deformation behavior, bonding strength with deposited material, printing quality, and range of material usability. Theoretical examination and physical experiments were performed for each of these areas; the results were compared to similar experiments done using heated aluminum and aluminum-glass print beds. Ten distinct materials (ABS, PLA, PET, HIPS, PC, TPU, PVA, nylon, metal PLA, and carbon-fiber PLA were tested for printing performance. The use of a heated AL-PC print bed was found to be a practical option for most of the materials, particularly ABS and TPU, which are often challenging to process using traditional print bed types. Generally, the results were found to be equivalent to or superior to tempered glass and superior to standard aluminum build plates in terms of printing capability.

  2. Tribological Behaviors of Graphene and Graphene Oxide as Water-Based Lubricant Additives for Magnesium Alloy/Steel Contacts

    Directory of Open Access Journals (Sweden)

    Hongmei Xie

    2018-01-01

    Full Text Available The tribological behaviors of graphene and graphene oxide (GO as water-based lubricant additives were evaluated by use of a reciprocating ball-on-plate tribometer for magnesium alloy-steel contacts. Three sets of test conditions were examined to investigate the effect of concentration, the capacity of carrying load and the endurance of the lubrication film, respectively. The results showed that the tribological behaviors of water can be improved by adding the appropriate graphene or GO. Compared with pure deionized water, 0.5 wt.% graphene nanofluids can offer reduction of friction coefficient by 21.9% and reduction of wear rate by 13.5%. Meanwhile, 0.5 wt.% GO nanofluids were found to reduce the friction coefficient and wear rate up to 77.5% and 90%, respectively. Besides this, the positive effect of the GO nanofluids was also more pronounced in terms of the load-carrying capacity and the lubrication film endurance. The wear mechanisms have been tentatively proposed according to the observation of the worn surfaces by field emission scanning electron microscope-energy dispersive spectrometer (FESEM-EDS and Raman spectrum as well as the wettability of the nanofluids on the magnesium alloy surface by goniometer.

  3. Tribological Behaviors of Graphene and Graphene Oxide as Water-Based Lubricant Additives for Magnesium Alloy/Steel Contacts.

    Science.gov (United States)

    Xie, Hongmei; Jiang, Bin; Dai, Jiahong; Peng, Cheng; Li, Chunxia; Li, Quan; Pan, Fusheng

    2018-01-29

    The tribological behaviors of graphene and graphene oxide (GO) as water-based lubricant additives were evaluated by use of a reciprocating ball-on-plate tribometer for magnesium alloy-steel contacts. Three sets of test conditions were examined to investigate the effect of concentration, the capacity of carrying load and the endurance of the lubrication film, respectively. The results showed that the tribological behaviors of water can be improved by adding the appropriate graphene or GO. Compared with pure deionized water, 0.5 wt.% graphene nanofluids can offer reduction of friction coefficient by 21.9% and reduction of wear rate by 13.5%. Meanwhile, 0.5 wt.% GO nanofluids were found to reduce the friction coefficient and wear rate up to 77.5% and 90%, respectively. Besides this, the positive effect of the GO nanofluids was also more pronounced in terms of the load-carrying capacity and the lubrication film endurance. The wear mechanisms have been tentatively proposed according to the observation of the worn surfaces by field emission scanning electron microscope-energy dispersive spectrometer (FESEM-EDS) and Raman spectrum as well as the wettability of the nanofluids on the magnesium alloy surface by goniometer.

  4. Mechanical Deformation Behavior of Sn-Ag-Cu Solders with Minor Addition of 0.05 wt.% Ni

    Science.gov (United States)

    Hammad, A. E.; El-Taher, A. M.

    2014-11-01

    The aim of the present work is to develop a comparative evaluation of the microstructural and mechanical deformation behavior of Sn-Ag-Cu (SAC) solders with the minor addition of 0.05 wt.% Ni. Test results showed that, by adding 0.05Ni element into SAC solders, generated mainly small rod-shaped (Cu,Ni)6Sn5 intermetallic compounds (IMCs) inside the β-Sn phase. Moreover, increasing the Ag content and adding Ni could result in the change of the shape and size of the IMC precipitate. Hence, a significant improvement is observed in the mechanical properties of SAC solders with increasing Ag content and Ni addition. On the other hand, the tensile results of Ni-doped SAC solders showed that both the yield stress and ultimate tensile strengths decrease with increasing temperature and with decreasing strain rate. This behavior was attributed to the competing effects of work hardening and dynamic recovery processes. The Sn-2.0Ag-0.5Cu-0.05Ni solder displayed the highest mechanical properties due to the formation of hard (Cu,Ni)6Sn5 IMCs. Based on the obtained stress exponents and activation energies, it is suggested that the dominant deformation mechanism in SAC (205)-, SAC (0505)- and SAC (0505)-0.05Ni solders is pipe diffusion, and lattice self-diffusion in SAC (205)-0.05Ni solder. In view of these results, the Sn-2.0Ag-0.5Cu-0.05Ni alloy is a more reliable solder alloy with improved properties compared with other solder alloys tested in the present work.

  5. Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading.

    Science.gov (United States)

    de Krijger, Joep; Rans, Calvin; Van Hooreweder, Brecht; Lietaert, Karel; Pouran, Behdad; Zadpoor, Amir A

    2017-06-01

    Additively manufactured (AM) porous metallic biomaterials are considered promising candidates for bone substitution. In particular, AM porous titanium can be designed to exhibit mechanical properties similar to bone. There is some experimental data available in the literature regarding the fatigue behavior of AM porous titanium, but the effect of stress ratio on the fatigue behavior of those materials has not been studied before. In this paper, we study the effect of applied stress ratio on the compression-compression fatigue behavior of selective laser melted porous titanium (Ti-6Al-4V) based on the diamond unit cell. The porous titanium biomaterial is treated as a meta-material in the context of this work, meaning that R-ratios are calculated based on the applied stresses acting on a homogenized volume. After morphological characterization using micro computed tomography and quasi-static mechanical testing, the porous structures were tested under cyclic loading using five different stress ratios, i.e. R = 0.1, 0.3, 0.5, 0.7 and 0.8, to determine their S-N curves. Feature tracking algorithms were used for full-field deformation measurements during the fatigue tests. It was observed that the S-N curves of the porous structures shift upwards as the stress ratio increases. The stress amplitude was the most important factor determining the fatigue life. Constant fatigue life diagrams were constructed and compared with similar diagrams for bulk Ti-6Al-4V. Contrary to the bulk material, there was limited dependency of the constant life diagrams to mean stress. The notches present in the AM biomaterials were the sites of crack initiation. This observation and other evidence suggest that the notches created by the AM process cause the insensitivity of the fatigue life diagrams to mean stress. Feature tracking algorithms visualized the deformation during fatigue tests and demonstrated the root cause of inclined (45°) planes of specimen failure. In conclusion, the R

  6. Research on EHN additive on the diesel engine combustion characteristics in plateau environment

    Science.gov (United States)

    Sun, Zhixin; Li, Ruoting; Wang, Xiancheng; Hu, Chuan

    2017-03-01

    Aiming at the combustion deterioration problem of diesel engine in plateau environment, a bench test was carried out for the effects of EHN additive on combustion characteristics of the diesel engine with intake pressure of 0.68 kPa. Test results showed that with the full load working condition of 1 400 r/min: Cylinder pressure and pressure uprising rate decreased with EHN additive added in, mechanical load on the engine could be relieved; peak value of the heat release rate decreased and its occurrence advanced, ignition delay and combustion duration were shortened; cylinder temperature and exhaust gas temperature declined, thermal load on the engine could be relieved, output torque increased while specific oil consumption decreased, and effective thermal efficiency of diesel engine increased.

  7. Educational Behavior Apps and Wearable Devices: Current Research and Prospects

    Science.gov (United States)

    Lowe, Heather

    2016-01-01

    Dartmouth and MIT have developed educational behavior apps and wearable devices that collect contiguous streams of data from student users. Given the consent of the user, the app collects information about a student's physical activity, sleep patterns, and location to form conjectures about social and academic behavior. These apps have the…

  8. Behavioral phenotyping of mice in pharmacological and toxicological research.

    Science.gov (United States)

    Karl, Tim; Pabst, Reinhard; von Hörsten, Stephan

    2003-07-01

    The evaluation of behavioral effects is an important component for the in vivo screening of drugs or potentially toxic compounds in mice. Ideally, such screening should be composed of monitoring general health, sensory functions, and motor abilities, right before specific behavioral domains are tested. A rational strategy in the design and procedure of testing as well as an effective composition of different well-established and reproducible behavioral tests can minimize the risk of false positive and false negative results in drug screening. In the present review we describe such basic considerations in planning experiments, selecting strains of mice, and propose groups of behavioral tasks suitable for a reliable detection of differences in specific behavioral domains in mice. Screening of general health and neurophysiologic functions (reflexes, sensory abilities) and motor function (pole test, wire hang test, beam walking, rotarod, accelerod, and footprint) as well as specific hypothesis-guided testing in the behavioral domains of learning and memory (water maze, radial maze, conditioned fear, and avoidance tasks), emotionality (open field, hole board, elevated plus maze, and object exploration), nociception (tail flick, hot plate), psychiatric-like conditions (porsolt swim test, acoustic startle response, and prepulse inhibition), and aggression (isolation-induced aggression, spontaneous aggression, and territorial aggression) are described in further detail. This review is designed to describe a general approach, which increases reliability of behavioral screening. Furthermore, it provides an overview on a selection of specific procedures suitable for but not limited to behavioral screening in pharmacology and toxicology.

  9. The effect of trace additions of Zn on the precipitation behavior of alloy 8090 during artificial aging

    Science.gov (United States)

    Kilmer, R. J.; Stoner, G. E.

    1991-01-01

    The effect(s) of trace additions of Zn to the artificial aging behavior of alloy 8090 (Al-Li-Cu-Mg-Zr) was investigated in the approximate composition range 0-1 wt-pct Zn. Trace Zn additions were found to delay aging and under equivalent aging treatments (100 hrs at 160 C) the alloy without Zn and the 1.07 wt-pct Zn alloy developed delta-prime-free zones along subgrain boundaries, while the alloys of 0.21 and 0.58 wt-pct Zn did not. DSC analysis indicated that Zn was being incorporated into the delta-prime, shifting it's exotherm to higher temperatures, while having little if any effect on its associated endotherm making it unlikely that it is an artifact of a solvus shift. In the 8090 + 1.07 wt-pct Zn alloy, coarse precipitates were found to reside on subgrain boundaries and EDS indicated that they were rich in Cu and Zn. It was also noted that in the Zn containing 8090 varients, the S prime precipitates were more coarse in size than the baseline 8090.

  10. The Effect of MoO42- Addition on the Intergranular Corrosion Behavior of Sensitized type 304 Stainless Steel

    International Nuclear Information System (INIS)

    Lee, Kee Pyo; Kim, Kwan Hyu

    1988-01-01

    This experiment is aimed at the investigation of the effect of MoO 4 2- added to the electrolyte on the corrosion behavior of sensitized 304 stainless steel. The specimens of 304 stainless steel were sensitized for 1 hour at 800 .deg. C, and also for 1 hour at 800 .deg. C followed by 600 .deg. C for 2 hours. Polarization curves of the specimens were obtained in 1N H 2 SO 4 + 0.2N NCl (with or without 0.001M MoO 4 2- ) and in 1N H 2 SO 4 + 0.01N KSCN (with or without 0.001M MoO 4 2- )solutions. All specimens after corrosion test were subjected to microstructural analysis by using an optical microscope. The susceptibility of 304 stainless steel to the intergranular corrosion was decreased by the addition of MoO 4 2- to the electrolyte. It is suggested that the MoO 4 2- in the electrolyte leads to the easy formation of a passive film on the stainless steel substrate. It was confirmed that the area of intergranular attack of stainless steel was decreased by the addition of MoO 4 2- to the electrolyte

  11. Linking behavior in the physics education research coauthorship network

    Science.gov (United States)

    Anderson, Katharine A.; Crespi, Matthew; Sayre, Eleanor C.

    2017-06-01

    There is considerable long-term interest in understanding the dynamics of collaboration networks, and how these networks form and evolve over time. Most of the work done on the dynamics of social networks focuses on well-established communities. Work examining emerging social networks is rarer, simply because data are difficult to obtain in real time. In this paper, we use thirty years of data from an emerging scientific community to look at that crucial early stage in the development of a social network. We show that when the field was very young, islands of individual researchers labored in relative isolation, and the coauthorship network was disconnected. Thirty years later, rather than a cluster of individuals, we find a true collaborative community, bound together by a robust collaboration network. However, this change did not take place gradually—the network remained a loose assortment of isolated individuals until the mid 2000s, when those smaller parts suddenly knit themselves together into a single whole. In the rest of this paper, we consider the role of three factors in these observed structural changes: growth, changes in social norms, and the introduction of institutions such as field-specific conferences and journals. We have data from the very earliest years of the field, a period which includes the introduction of two different institutions: the first field-specific conference, and the first field-specific journals. We also identify two relevant behavioral shifts: a discrete increase in coauthorship coincident with the first conference, and a shift among established authors away from collaborating with outsiders, towards collaborating with each other. The interaction of these factors gives us insight into the formation of collaboration networks more broadly.

  12. Linking behavior in the physics education research coauthorship network

    Directory of Open Access Journals (Sweden)

    Katharine A. Anderson

    2017-05-01

    Full Text Available There is considerable long-term interest in understanding the dynamics of collaboration networks, and how these networks form and evolve over time. Most of the work done on the dynamics of social networks focuses on well-established communities. Work examining emerging social networks is rarer, simply because data are difficult to obtain in real time. In this paper, we use thirty years of data from an emerging scientific community to look at that crucial early stage in the development of a social network. We show that when the field was very young, islands of individual researchers labored in relative isolation, and the coauthorship network was disconnected. Thirty years later, rather than a cluster of individuals, we find a true collaborative community, bound together by a robust collaboration network. However, this change did not take place gradually—the network remained a loose assortment of isolated individuals until the mid 2000s, when those smaller parts suddenly knit themselves together into a single whole. In the rest of this paper, we consider the role of three factors in these observed structural changes: growth, changes in social norms, and the introduction of institutions such as field-specific conferences and journals. We have data from the very earliest years of the field, a period which includes the introduction of two different institutions: the first field-specific conference, and the first field-specific journals. We also identify two relevant behavioral shifts: a discrete increase in coauthorship coincident with the first conference, and a shift among established authors away from collaborating with outsiders, towards collaborating with each other. The interaction of these factors gives us insight into the formation of collaboration networks more broadly.

  13. Research and Development Opportunities for Technologies to Influence Water Consumption Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Levin, Todd [Argonne National Lab. (ANL), Argonne, IL (United States); Horner, Robert M. [Argonne National Lab. (ANL), Argonne, IL (United States); Muehleisen, Ralph T. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-01

    psychology as they relate to human behavior regarding water consumption. The findings presented here can help to inform policy makers as they develop new policies and seek to support new research to help consumers use water more efficiently. It is our hope that these findings will also be utilized to prioritize topics for additional follow-up workshops to address individual issues and barriers more directly and in more detail. The goal of such future workshops will be to develop specific solutions, research plans, and technology development pathways that can be undertaken to increase the market penetration of technologies that effect behavioral change and reduce water consumption.

  14. Preparation and research on properties of castor oil as a diesel fuel additive

    OpenAIRE

    Nurbakhit Imankulov

    2012-01-01

    The research shows an opportunity of preparing biodiesel fuel on the basis of local diesel fuel and the bioadditive - castor oil. Limiting optimum concentration of introduction of the bioadditive equal was established as 5% mass ratio. The castor oil released from seeds of Palma Christi grown on experimental field. All physical and chemical characteristics of the oil including IR-spectra were determined. Operating conditions of castor oil introduction (temperature, solubility, concentra-tion,...

  15. Additional investigations within the research programme launched after the Chernobyl accident

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The additional investigations concern the determination of the transfer of the fission products I-131, Cs-137, Cs-134, and Te-132 along the pasture-cattle-milk pathway insolving fresh grass, and of the fission products Cs-137 and Cs-134 from winter fodder to milk, beef and veal, and the enrichment of Cs-137 and Sr-90 in the human organism as well as the migration of the fission products Cs-137, Cs-134, Ru-103, and K-40 from the Chernobyl fall-out to the soil. (DG) [de

  16. Commentary on: Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research. Excessive behaviors are not necessarily addictive behaviors.

    Science.gov (United States)

    Ko, Chih-Hung; Yen, Ju-Yu

    2015-09-01

    The commentary aims to provide clarity to the article "Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research." We provide another viewpoint for the important issues of behavior addiction. The course of behavior addiction should be further studied. The criteria of withdrawal and tolerance of behavior addiction are ill-defined and need to be further evaluated. The etiology, course, presentation, and functional impairment of behavior addiction should be validated by evidence-based data before being defined as a disorder.

  17. Functions of Research in Radical Behaviorism for the Further Development of Behavior Analysis

    Science.gov (United States)

    Leigland, Sam

    2010-01-01

    The experimental analysis of behavior began as an inductively oriented, empirically based scientific field. As the field grew, its distinctive system of science--radical behaviorism--grew with it. The continuing growth of the empirical base of the field has been accompanied by the growth of the literature on radical behaviorism and its…

  18. An Objective Comparison of Applied Behavior Analysis and Organizational Behavior Management Research

    Science.gov (United States)

    Culig, Kathryn M.; Dickinson, Alyce M.; McGee, Heather M.; Austin, John

    2005-01-01

    This paper presents an objective review, analysis, and comparison of empirical studies targeting the behavior of adults published in Journal of Applied Behavior Analysis (JABA) and Journal of Organizational Behavior Management (JOBM) between 1997 and 2001. The purpose of the comparisons was to identify similarities and differences with respect to…

  19. Biogas Production Experimental Research by Using Sewage Sludge Loading with Biochar Additive

    Directory of Open Access Journals (Sweden)

    Vitalij Kolodynskij

    2017-09-01

    Full Text Available Biogas – ecological fuel, which is assigned to alternative energy sources. It should be noted, that biogas – renewable energy source, which does not require any specific climatic conditions or geographical position of a country. This power source is available and can be successfully produced and used in all countries of the world. The main components of biogas – methane CH4 and carbon monoxide CO2. This gas is formed under anaerobic conditions, when microorganisms decompose biodegradable biomass. In biological sciences biomass means a living matter content, expressed in grams per unit area. Meanwhile, in the energy sector, the definition of biomass is limited and biomass is characterized as fuel source, produced from plant materials and organic waste (food waste, wood, sludge, manure, vegetables, etc.. Currently, to produce biogas from biomass, bioreactors are used worldwide. However, in order to increase the quality and yield of biogas, in the world practice various bioload additives are used: vegetable waste, clay minerals, and a large amount of the protein-containing waste. The goal – to evaluate the impact of biochar on biogas quality and yield using sewage sludge load. It was found, that 10% biochar additive increased average CH4 concentration of 7.9%, reduced the CO2 concentration of 3–4% and totally removed H2S from biogas.

  20. Fundamental study on dynamic behaviors of fuel debris bed. Research report in 2007 (Joint research)

    International Nuclear Information System (INIS)

    Morita, Koji; Fukuda, Kenji; Matsumoto, Tatsuya; Tobita, Yoshiharu; Suzuki, Tohru; Yamano, Hidemasa

    2009-05-01

    It is important to make a reasonable evaluation of coolability of debris bed with decay heat source in assessing post accident heat removal of a liquid metal cooled fast reactor. In general, the coolability of fuel debris depends on coolant convection, boiling and debris bed movement. In the present study, to understand fundamental characteristics of debris movement, self-leveling behavior caused by the coolant boiling was investigated experimentally using simulant materials. The present experiments employed depressurization boiling of water to simulate void distribution in a debris bed, which consists of solid particles of alumina. A rough estimation model of self-leveling occurrence was proposed and compared with the experimental results. Its extrapolation to reactor accident conditions was also discussed. In addition, solid-liquid flow experiments, which are relevant to debris bed movement behaviors, were analyzed to verify the validity of multiphase flow models employed in a safety analysis code. In the present verification study, basic validity of the code was demonstrated by analyzing experiments of water-column sloshing with solid particles. (author)

  1. Additional transport channel of carbon ions for biological research at the Nuclotron of JINR

    International Nuclear Information System (INIS)

    Yudin, I.P.; Panasik, V.A.; Tyutyunnikov, S.I.

    2011-01-01

    The paper deals with the construction of the 12 C +6 beam transport line for biomedical research at the Nuclotron accelerator complex, JINR. We have studied the scheme and modes of magneto-optical elements of the channel. The results of calculations of the investigated beam transport of carbon ions are presented. The algorithms to control the carbon ion beam in the transportation system are discussed. The choice of the magneto-optical system is motivated. The graphs of the beam envelopes in the channel are given. The scanning control beam functions are considered

  2. Additional transport channel of carbon ions for biological research at the Nuclotron of JINR

    International Nuclear Information System (INIS)

    Yudin, I.P.; Panasik, V.A.; Tyutyunnikov, S.I.

    2012-01-01

    The paper deals with the construction of the beam 12 C +6 transport line for biomedical research at the Nuclotron accelerator complex, JINR. We have studied the scheme and modes of magneto-optical elements of the channel. The results of calculations of the investigated beam transport of carbon ions are presented. The algorithms to control the carbon ion beam in the transportation system are discussed. The choice of the magneto-optical system is motivated. The graphs of the beam envelopes in the channel are given. The scanning control beam functions are considered

  3. High temperature tribological behaviors of (WAl)C–Co ceramic composites with the additions of fluoride solid lubricants

    International Nuclear Information System (INIS)

    Cheng, Jun; Qiao, Zhuhui; Yin, Bing; Hao, Junying; Yang, Jun; Liu, Weimin

    2015-01-01

    The tribological behaviors of the (W 0.67 Al 0.33 )C 0.67 –Co/fluoride (CaF 2 , BaF 2 , CaF 2 /BaF 2 ) composites against SiC ball from room temperature to 600 °C were investigated. A marked increase in the friction coefficient resulting from fluoride oxidation was observed as the temperature increased. The composites containing BaF 2 or (Ca, Ba)F 2 displayed better integrated wear resistance over a wide temperature range compared with (W 0.67 Al 0.33 )C 0.67 –Co/CaF 2 . The high temperature tribological characteristics of the three composites were distinct, which originated from the composition difference on the worn surfaces. First, the SiO 2 /SiC film formed on the worn surfaces of the composites with BaF 2 or (Ca, Ba)F 2 was favorable for their wear resistance. Second, the oxidation of WC matrix was an important factor influencing the wear resistance of the composites. When mixture oxides of WO 2 and WO 3 appeared on the surface, wear is severe. In addition, single WO 3 formed on the worn surfaces, appeared more adhesive to the underlying substrate and decreased the wear rate. - Highlights: • The composites containing BaF 2 or (Ca, Ba)F 2 exhibit better wear resistance. • The tribological behaviors are strongly correlated to surface composition. • The stoichiometry difference in the tungsten oxides leads to distinct wear rate. • The friction coefficient of the composites increases with the testing temperature

  4. High temperature tribological behaviors of (WAl)C–Co ceramic composites with the additions of fluoride solid lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jun; Qiao, Zhuhui, E-mail: zhqiao@licp.cas.cn; Yin, Bing; Hao, Junying, E-mail: jyhao@licp.cas.cn; Yang, Jun; Liu, Weimin

    2015-08-01

    The tribological behaviors of the (W{sub 0.67}Al{sub 0.33})C{sub 0.67}–Co/fluoride (CaF{sub 2}, BaF{sub 2}, CaF{sub 2}/BaF{sub 2}) composites against SiC ball from room temperature to 600 °C were investigated. A marked increase in the friction coefficient resulting from fluoride oxidation was observed as the temperature increased. The composites containing BaF{sub 2} or (Ca, Ba)F{sub 2} displayed better integrated wear resistance over a wide temperature range compared with (W{sub 0.67}Al{sub 0.33})C{sub 0.67}–Co/CaF{sub 2}. The high temperature tribological characteristics of the three composites were distinct, which originated from the composition difference on the worn surfaces. First, the SiO{sub 2}/SiC film formed on the worn surfaces of the composites with BaF{sub 2} or (Ca, Ba)F{sub 2} was favorable for their wear resistance. Second, the oxidation of WC matrix was an important factor influencing the wear resistance of the composites. When mixture oxides of WO{sub 2} and WO{sub 3} appeared on the surface, wear is severe. In addition, single WO{sub 3} formed on the worn surfaces, appeared more adhesive to the underlying substrate and decreased the wear rate. - Highlights: • The composites containing BaF{sub 2} or (Ca, Ba)F{sub 2} exhibit better wear resistance. • The tribological behaviors are strongly correlated to surface composition. • The stoichiometry difference in the tungsten oxides leads to distinct wear rate. • The friction coefficient of the composites increases with the testing temperature.

  5. Greek research reactor performance characteristics after addition of beryllium reflector and LEU fuel

    International Nuclear Information System (INIS)

    Deen, J.R.; Snelgrove, J.L.; Papastergiou, C.

    1992-01-01

    The GRR-1 is a 5-MW pool-type, light-water-moderated and-cooled reactor fueled with MTR-type fuel elements. Recently received Be reflector blocks will soon be added to the core to add additional reactivity until fresh LEU fuel arrives. REBUS-3 xy fuel cycle analyses, using burnup dependent cross sections, were performed to assist in fuel management decisions for the water- and Be-reflected HEU nonequilibrium cores. Cross sections generated by EPRI-CELL have been benchmarked to identical VIM Monte Carlo models. The size of the Be-reflected LEU core has been reduced to 30 elements compared to 35 for the HEU water-reflected core, and an equilibrium cycle calculation has been performed

  6. Research topics in explosives - a look at explosives behaviors

    International Nuclear Information System (INIS)

    Maienschein, J L

    2014-01-01

    The behaviors of explosives under many conditions - e.g., sensitivity to inadvertent reactions, explosion, detonation - are controlled by the chemical and physical properties of the explosive materials. Several properties are considered for a range of improvised and conventional explosives. Here I compare these properties across a wide range of explosives to develop an understanding of explosive behaviors. For improvised explosives, which are generally heterogeneous mixtures of ingredients, a range of studies is identified as needed to more fully understand their behavior and properties. For conventional explosives, which are generally comprised of crystalline explosive molecules held together with a binder, I identify key material properties that determine overall sensitivity, including the extremely safe behavior of Insensitive High Explosives, and discuss an approach to predicting the sensitivity or insensitivity of an explosive.

  7. Cell phone data and travel behavior research: symposium summary report

    Science.gov (United States)

    2014-07-01

    This report summarizes the key themes from a symposium held on February 12, 2014, to discuss opportunities and challenges using cellular location data for national travel behavior analysis. Participants discussed the availability of cellular data and...

  8. Online Behavioral Advertising: A Literature Review and Research Agenda

    OpenAIRE

    Boerman, S.C.; Kruikemeier, S.; Zuiderveen Borgesius, F.J.

    2017-01-01

    Advertisers are increasingly monitoring people's online behavior and using the information collected to show people individually targeted advertisements. This phenomenon is called online behavioral advertising (OBA). Although advertisers can benefit from OBA, the practice also raises concerns about privacy. Therefore, OBA has received much attention from advertisers, consumers, policymakers, and scholars. Despite this attention, there is neither a strong definition of OBA nor a clear accumula...

  9. Research of cement mixtures with additions of industrial by-products

    Science.gov (United States)

    Papesch, R.; Klus, L.; Svoboda, J.; Zajac, R.

    2017-10-01

    The main goal of the article is the comparison of the possible use of secondary energy products. Used fly ashes, respectively steel dusts in cement mixes derive from production in Moravian-Silesian Region. The research focused on their influence on the chemical and physico-mechanical characteristics of the fresh and solid mixture. The aim was to find suitable formulations for grouting works, highway construction possibly rehabilitation of underground cavities created by mining activities. The introduction is mentioned the history of waste utilization up to current use as a product and the overall state of the problem. The conclusion is an evaluation of possible use in practice, including recommendations to carry out further tests.

  10. Cognitive-behavioral therapy for children with anxiety disorders in a clinical setting : No additional effect of a cognitive parent training

    NARCIS (Netherlands)

    Nauta, MH; Scholing, A; Emmelkamp, PMG; Minderaa, RB

    2003-01-01

    To evaluate a 12-week cognitive-behavioral treatment program for children with anxiety disorders and the additional value of a seven-session cognitive parent training program. Method: Seventy-nine children with an anxiety disorder (aged 7-18 years) were randomly assigned to a cognitive behavioral

  11. Effect of solution treatment on precipitation behaviors and age hardening response of Al–Cu alloys with Sc addition

    International Nuclear Information System (INIS)

    Chen, B.A.; Pan, L.; Wang, R.H.; Liu, G.; Cheng, P.M.; Xiao, L.; Sun, J.

    2011-01-01

    Highlights: ► Effects of Sc addition on the precipitation and age hardening of Al–Cu alloy were investigated. ► The critical influence of solution treatment on the Sc effect was revealed. ► A significant enhancement in age hardening response was experimentally found and quantitatively assessed. - Abstract: Influences of solution treatment on precipitation behaviors and age hardening response of Al–2.5 wt% Cu–0.3 wt% Sc alloys were investigated, in comparison with Sc-free one. The Al 3 Sc dispersoids, formed during homogenization, were either survived or dissolved to become Sc solute atoms in solution treatment, depending on the solution temperature. When the temperature for solution treatment is 873 K, most of the Al 3 Sc dispersoids were dissolved and a significant enhancement in the uniform precipitation of finer θ′-Al 2 Cu particles was achieved in following aging treatment, causing a noticeable increase in peak-aging hardness by about 90% compared to Sc-free alloys. The enhanced age hardening effect was quantitatively related to the remarkable reduction in effective inter-particle spacing of the plate-shaped θ′-Al 2 Cu precipitates. When the temperature for solution treatment is 793 K, however, most of the Al 3 Sc dispersoids were survived after solution treatment and facilitated the heterogeneous precipitation of θ′-Al 2 Cu plates directly on the {1 0 0} facets of dispersoids in following aging treatment. Concomitantly, the uniform precipitation of θ′-Al 2 Cu plates was greatly suppressed, resulting in a reduced age hardening response. The age hardening responses were quantitatively assessed by using a modified strengthening model that is applicable to the plate-shaped precipitates. The calculations were in good agreement with experimental results. The present results show the importance of controlling solution treatments to achieve significant promotion effect of Sc addition on the precipitation hardening in heat-treatable aluminum

  12. Evolution of Research on Interventions for Individuals with Autism Spectrum Disorder: Implications for Behavior Analysts

    Science.gov (United States)

    Smith, Tristram

    2012-01-01

    The extraordinary success of behavior-analytic interventions for individuals with autism spectrum disorder (ASD) has fueled the rapid growth of behavior analysis as a profession. One reason for this success is that for many years behavior analysts were virtually alone in conducting programmatic ASD intervention research. However, that era has…

  13. The Selective Impact of Skinner's "Verbal Behavior" on Empirical Research: A Reply to Schlinger (2008)

    Science.gov (United States)

    Dymond, Simon; Alonso-Alvarez, Benigno

    2010-01-01

    In a recent article, Schlinger (2008) marked the 50th anniversary of the publication of Skinner's "Verbal Behavior" (1957) by considering its impact on the field of behaviorism and research on verbal behavior. In the present article, we comment on Schlinger's conclusions regarding the impact of the book and highlight the extensions and…

  14. Behavioral science in video games for children's diet and physical activity change: Key research needs

    Science.gov (United States)

    Innovative intervention programs are needed to overcome the limitations in previous programs that promoted change in diabetes risk behaviors in children. Serious video games show promise of changing dietary and physical activity behaviors, but research is needed on the optimal design of behavior-cha...

  15. The behavior of heavy metals in the process of desulfurization of Brazilian coal combustion gases by the addition of limestone

    Directory of Open Access Journals (Sweden)

    Sebag M.G.

    2001-01-01

    Full Text Available The concentrations of heavy metals in two kinds of Brazilian coals at 100° C (acid digestion and at 850° C were studied (ashes the obtained in muffle furnace with and without addition of limestone. Data were analyzed by flame atomic absorption, using the air acetylene flame. For Pb, Zn, Ni, Mn and Cu the metal concentration obtained the acid digestion were higher than metal concentration were obtained in tests in the muffle furnace. This behavior observed in the muffle furnace occurs because these metals are fixed in stable sulfated compounds in the ashes, which are difficult to dissociate at flame temperature, and also due to the volatile character of the metals, mainly Pb and Zn. There was a constant concentration in the ashes in of Cr the acid digestion and muffle furnace tests. Results from tests using an XRD apparatus indicated, he formation of sulfated compounds in the ashes for both. coals. The analysis using microprobe electronic showed retention of metals like Ni, Mn, Cu, Fe, Ti and Ca. For both coals, the low mobility of most of the metals studied occured due to the alkaline pH of sulfated ashes. These metals in the ash from coal combustion in fluidized bed reactor were also studied and showed similar results, enabling a scale-up to pilot scale.

  16. Investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al alloy with Ag and Mn additions

    International Nuclear Information System (INIS)

    Silva, R.A.G.; Paganotti, A.; Gama, S.; Adorno, A.T.; Carvalho, T.M.; Santos, C.M.A.

    2013-01-01

    The investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al, Cu-11%Al-3%Ag, Cu-11%Al-10%Mn and Cu-11%Al-10%Mn-3%Ag alloys was made using microhardness measurements, differential scanning calorimetry, X-ray diffractometry, scanning electron microscopy, energy dispersion X-ray spectroscopy and magnetic moment change with applied field measurement. The results indicated that the Mn addition changes the phase stability range, the microhardness values and makes undetectable the eutectoid reaction in annealed Cu-11%Al and Cu-11%Al-3%Ag alloys while the presence of Ag does not modify the phase transformation sequence neither microhardness values of the annealed Cu-11%Al and Cu-11%Al-10%Mn alloys, but it increases the magnetic moment of this latter at about 2.7 times and decreases the rates of eutectoid and peritectoid reactions of the former. - Highlights: ► The microstructure of Cu-Al alloy is modified in the Ag presence. ► (α + γ) phase is stabilized down to room temperature when Ag is added to Cu-Al alloy. ► Ag-rich phase modifies the magnetic characteristics of Cu–Al–Mn alloy.

  17. Effect of Zr addition on phase constitution and heat treatment behavior of Ti-25mass%Nb alloys

    International Nuclear Information System (INIS)

    Ikeda, M.; Mori, M.; Hirasawa, T.; Toyoshima, K.

    2005-01-01

    In an attempt to optimize the shape recovery temperature, the effect of Zr addition on phase constitution and heat treatment behavior is investigated by electrical resistivity and Vickers hardness (HV) measurements, X-ray diffractometry (XRD) and shape recovery tests. Ti-25mass%Nb-0, 2, 7 and 12mass%Zr alloys (abbreviated as 0Zr, 2Zr, 7Zr and 12Zr, respectively) were prepared using an arc-furnace. Specimens were solution-treated at 1273 K for 3.6 ks and then quenched by iced water (STQ). STQed specimens were isochronally heat-treated. In 0Zr and 2Zr, only the orthorhombic martensite phase α '' was identified by XRD, while the two-phase alloys α '' and β were identified in 7Zr and 12Zr. In 7Zr, resistivity at liquid nitrogen and room temperature (ρ LN and ρ RT , respectively) and resistivity ratio (ρ LN /ρ RT ) drastically increased at 523 K because of the reverse-transformation of α '' into β phase. Thereafter, resistivity and resistivity ratio decreased with increasing heat treatment temperature due to isothermal ω precipitation. Starting temperature of shape recovery is 623 K in 7Zr and 523 K in 12Zr. In 7Zr, shape recovery ratio is about 80% at 723 K, which is the maximum obtained in this study. (orig.)

  18. Catalytic effect of additional metallic phases on the hydrogen absorption behavior of a Zr-Based alloy

    International Nuclear Information System (INIS)

    Ruiz, F; Peretti, H; Castro, E; Real, S; Visitin, A; Triaca, W

    2005-01-01

    The electrochemical hydrogen absorption of electrodes containing Zr 0 .9Ti 0 .1(Ni 0 .5Mn 0 .25Cr 0 .20V 0 .05) 2 is studied in alkaline media by monitoring the activation and discharge capacity along charge-discharge cycling.The considered alloy is tested in both as melted and annealed condition in order to investigate the catalytic effect of small amounts of micro segregated secondary phases of the Zr-Ni system. Since these catalytic phases are only present in the as melted alloys, tests are also carried out using a composite material elaborated from powders of the annealed alloy with the addition of 18 wt.% of the suspected catalytic phases, melted separately.The hydrogen absorption-desorption behavior for the different cases is discussed and correlated with the metallurgical characterization of the materials.The catalytic effects are studied employing cyclic voltammetry and electrochemical impedance techniques. The results are analyzed in terms of a developed physicochemical model

  19. Research on Driver Behavior in Yellow Interval at Signalized Intersections

    Directory of Open Access Journals (Sweden)

    Zhaosheng Yang

    2014-01-01

    Full Text Available Vehicles are often caught in dilemma zone when they approach signalized intersections in yellow interval. The existence of dilemma zone which is significantly influenced by driver behavior seriously affects the efficiency and safety of intersections. This paper proposes the driver behavior models in yellow interval by logistic regression and fuzzy decision tree modeling, respectively, based on camera image data. Vehicle’s speed and distance to stop line are considered in logistic regression model, which also brings in a dummy variable to describe installation of countdown timer display. Fuzzy decision tree model is generated by FID3 algorithm whose heuristic information is fuzzy information entropy based on membership functions. This paper concludes that fuzzy decision tree is more accurate to describe driver behavior at signalized intersection than logistic regression model.

  20. Applications of pilot scanning behavior to integrated display research

    Science.gov (United States)

    Waller, M. C.

    1977-01-01

    The oculometer is an electrooptical device designed to measure pilot scanning behavior during instrument approaches and landing operations. An overview of some results from a simulation study is presented to illustrate how information from the oculometer installed in a visual motion simulator, combined with measures of performance and control input data, can provide insight into the behavior and tactics of individual pilots during instrument approaches. Differences in measured behavior of the pilot subjects are pointed out; these differences become apparent in the way the pilots distribute their visual attention, in the amount of control activity, and in selected performance measures. Some of these measured differences have diagnostic implications, suggesting the use of the oculometer along with performance measures as a pilot training tool.

  1. Psychological, behavioral and social effects of disclosing Alzheimer's disease biomarkers to research participants: a systematic review

    NARCIS (Netherlands)

    Bemelmans, S.AS.A.; Tromp, K.; Bunnik, E.M.; Milne, R.J.; Badger, S.; Brayne, C.; Schermer, M.H.; Richard, E.

    2016-01-01

    BACKGROUND: Current Alzheimer's disease (AD) research initiatives focus on cognitively healthy individuals with biomarkers that are associated with the development of AD. It is unclear whether biomarker results should be returned to research participants and what the psychological, behavioral and

  2. Contrasts and effect sizes in behavioral research: a correlational approach

    National Research Council Canada - National Science Library

    Rosenthal, Robert; Rosnow, Ralph L; Rubin, Donald B

    2000-01-01

    .... Researchers, teachers of research methods, and graduate students will be familiar with the principles and procedures of contrast analysis but will also be introduced to a series of newly developed...

  3. Synthesis of knowledge of extreme fire behavior: volume 2 for fire behavior specialists, researchers, and meteorologists

    Science.gov (United States)

    Paul A. Werth; Brian E. Potter; Martin E. Alexander; Craig B. Clements; Miguel G. Cruz; Mark A. Finney; Jason M. Forthofer; Scott L. Goodrick; Chad Hoffman; W. Matt Jolly; Sara S. McAllister; Roger D. Ottmar; Russell A. Parsons

    2016-01-01

    The National Wildfire Coordinating Group’s definition of extreme fire behavior indicates a level of fire behavior characteristics that ordinarily precludes methods of direct control action. One or more of the following is usually involved: high rate of spread, prolific crowning/ spotting, presence of fire whirls, and strong convection column. Predictability is...

  4. Use of Laboratory Animals in Biomedical and Behavioral Research.

    Science.gov (United States)

    Ministry of Education, Addis Ababa (Ethiopia).

    The use of animals in scientific research has been a controversial issue for over a hundred years. Research with animals has saved human lives, lessened human suffering, and advanced scientific understanding, yet that same research can cause pain and distress for the animals involved and may result in their death. It is hardly surprising that…

  5. Searching and Archiving : Exploring Online Search Behaviors of Researchers

    NARCIS (Netherlands)

    Vyas, Dhaval; de Groot, S.; van der Veer, Gerrit C.; Dainoff, Marvin J.

    2007-01-01

    Searching for relevant peer-reviewed material is an integral part of corporate and academic researchers. Researchers collect huge amount of information over the years and sometimes struggle organizing it. Based on a study with 30 academic researchers, we explore, in combination, different searching

  6. Self-Handicapping Behavior: A Critical Review of Empirical Research.

    Science.gov (United States)

    Carsrud, Robert Steven

    Since the identification of self-handicapping strategies in 1978, considerable attention has been paid to this phenomenon. Self-handicapping is a strategy for discounting ability attributions for probable failure while augmenting ability attributions for possible success. Behavioral self-handicaps are conceptually distinct from self-reported…

  7. Teachers' Reported Knowledge and Implementation of Research-Based Classroom and Behavior Management Strategies

    Science.gov (United States)

    Moore, Tara C.; Wehby, Joseph H.; Oliver, Regina M.; Chow, Jason C.; Gordon, Jason R.; Mahany, Laura A.

    2017-01-01

    Teachers' reported knowledge about and implementation of research-based classroom and behavior management strategies were examined. A total of 160 elementary teachers from two districts in different regions of the same state completed the researcher-developed "Survey of Classroom and Behavior Management." On average, teachers reported to…

  8. Bridging design and behavioral research with variance-based structural equation modeling

    NARCIS (Netherlands)

    Henseler, Jörg

    2017-01-01

    Advertising research is a scientific discipline that studies artifacts (e.g., various forms of marketing communication) as well as natural phenomena (e.g., consumer behavior). Empirical advertising research therefore requires methods that can model design constructs as well as behavioral constructs,

  9. Effect of Y addition on the aging hardening behavior and precipitation evolution of extruded Mg-Al-Zn alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ren, L.B. [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Quan, G.F., E-mail: quangf@home.swjtu.edu.cn [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhou, M.Y.; Guo, Y.Y.; Jiang, Z.Z.; Tang, Q. [Key Laboratory of Advanced Technologies of Materials, Ministry of Education, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China)

    2017-04-06

    Abstract:: The 443 K aging hardening behavior and microstructure evolution of extruded Mg-Al-Zn-Y alloys was investigated in aspects of yttrium (Y) content (0.2–0.8 wt%), holding time (0.5–156 h) and the initial states (as-extruded, solution treated). The grain size, precipitation evolution, phases and chemical composition were characterized by the optical microscope, scanning electron microscope, X-ray diffraction, and energy dispersive spectrometer, respectively. The corresponding mechanical response, including the hardness, uniaxial tensile strength were measured with the Vickers hardness tester and universal testing machine, respectively. The results show that, firstly, there is reversal hardness anisotropy between extrusion direction and normal direction in as-extruded Mg-Al-Zn-Y sheets compared with T5 treated ones. Secondly, the short-term aging softening exist at the beginning of T5 treatment which results in a lower hardness even be close to that of solution treated ones, but not for T6 conditions. Thirdly, the suppression of discontinuous precipitation during the aging treatment become more remarkable with increasing Y addition which because of the reduction of diffusional coherency strain near grain boundary, increasing activation energy for the discontinuous precipitates (β-Mg{sub 17}Al{sub 12} phase, DPs) formation and the dilution region of Al near the Al{sub 2}Y. Serrated GBs can also provide more nucleation sites for DPs and lead to relatively more precipitates during T5 treatment. Moreover, the proportional precipitation strengthening in yield strength and hardness was verified in Mg-Al-Zn-Y alloy during the aging process.

  10. Improved creep and oxidation behavior of a martensitic 9Cr steel by the controlled addition of boron and nitrogen

    Energy Technology Data Exchange (ETDEWEB)

    Mayr, Peter [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Materials Science; Graz Univ. of Technology (Austria). Inst. of Material Science and Welding; Holzer, Ivan; Mendez-Martin, Francisca [Graz Univ. of Technology (Austria). Inst. of Material Science and Welding; Albu, Mihaela; Mitsche, Stefan [Graz Univ. of Technology (Austria). Inst. for Electron Microscopy; Gonzalez, Vanessa; Agueero, Alina [Instituto Nacional de Tecnica Aeroespacial, Torrejon de Ardoz (Spain)

    2010-07-01

    This manuscript gives an overview on recent developments of a martensitic steel grade based on 9Cr3W3CoVNb with controlled additions of boron and nitrogen. Alloy design by thermodynamic equilibrium calculations and calculation of boron-nitrogen solubility is discussed. Out of this alloy design process, two melts of a 9Cr3W3CoVNbBN steel were produced. The investigation focused on microstructural evolution during high temperature exposure, creep properties and oxidation resistance in steam at 650 C. Microstructural characterization of ''as-received'' and creep exposed material was carried out using conventional optical as well as advanced electron microscopic methods. Creep data at 650 was obtained at various stress levels. Longest-running specimens have reached more than 20,000 hours of testing time. In parallel, long-term oxidation resistance has been studied at 650 C in steam atmosphere up to 5,000 hours. Preliminary results of the extensive testing program on a 9Cr3W3CoVNbBN steel show significant improvement in respect to creep strength and oxidation resistance compared to the state-of-the-art 9 wt. % Cr martensitic steel grades. Up to current testing times, the creep strength is significantly beyond the +20% scatterband of standard grade P92 material. Despite the chromium content of 9 wt % the material exhibits excellent oxidation resistance. Steam exposed plain base material shows comparable oxidation behavior to coated material, and the corrosion rate of the boron-nitrogen controlled steel is much lower compared to standard 9 wt % Cr steel grades, P91 and P92. (orig.)

  11. NASA Human Research Program Behavioral Health and Performance Element (BHP)

    Science.gov (United States)

    Whitmire, Sandra; Faulk, Jeremy; Leveton, Lauren

    2010-01-01

    The goal of NASA BHP is to identify, characterize, and prevent or reduce behavioral health and performance risks associated with space travel, exploration, and return to terrestrial life. The NASA Behavioral Health and Performance Operations Group (BHP Ops) supports astronauts and their families before, during, and after a long-duration mission (LDM) on the ISS. BHP Ops provides ISS crews with services such as preflight training (e.g., psychological factors of LDM, psychological support, cross-cultural); preflight, in-flight, and postflight support services, including counseling for astronauts and their families; and psychological support such as regular care packages and a voice-over IP phone system between crew members and their families to facilitate real-time one-on-one communication.

  12. Total Quality Management: A Unique Challenge For Behavioral Science Researchers,

    Science.gov (United States)

    Quality Management (TQM) programs in industry and government. The essence of TQM involves respect for personal choice and the participation of every level of workers in decisions which impact the organization. Typically, structured questionnaires developed by behavioral scientists are designed to be easy to summarize and generally lack any mechanism for personal comments, ideas, and suggestions. New open-ended, interactive, and iterative survey methodologies are needed to enhance creativity, encourage feedback, and foster a sense of participation. Total Quality

  13. Experimental researches about the influence of the additives for engine oils upon the work of the engine

    International Nuclear Information System (INIS)

    Dimitrovski, Mile; Mucevski, Kiril

    2003-01-01

    In this paper an attempt to get some cognitions about the influence of the additives for engine oils upon the working parameters of the internal combustion engines is made. During the experimental researches the changes of the basic parameters which determine the work of the engine, such as: the pressure of compression, the noise, the vibrations, the friction of the engine mechanism, the internal cleanliness of the engine and similar, were observed. It was conclude that the use of additives into the engine oil resulted with smoother work of the engine and cleaner exhausted as well. (Author)

  14. Effects of sulfur addition on pitting corrosion and machinability behavior of super duplex stainless steel containing rare earth metals: Part 2

    International Nuclear Information System (INIS)

    Jeon, Soon-Hyeok; Kim, Soon-Tae; Lee, In-Sung; Park, Yong-Soo

    2010-01-01

    Research highlights: → The mechanisms on the effects of rare earth metals (REM) and sulfur (S) additions on the initiation and propagation of pitting corrosion and machinabillity of a super duplex stainless steel (SDSS) were elucidated → It was found that, in consideration of the ratio of lifetime (the resistance to pitting corrosion) to cost (machining and raw material), a costly austenitic stainless steel with high Ni , medium Mo and low N can be replaced by the high S and REM added SDSS with 7 wt.% Ni-4 wt% Mo-0.3 wt.% N → The resistance to pitting corrosion of the tested super duplex stainless steel was affected by the type of inclusions, the preferential interface areas between inclusions and the substrate, and the PREN difference between the γ-phase and the α-phase for the initiation and propagation of the pitting corrosion. - Abstract: To elucidate the effects of sulfur addition on pitting corrosion and machinability behavior of alloys containing rare earth metals, a potentiostatic polarization test, a critical pitting temperature test, a SEM-EDS analysis of inclusions, and a tool life test were conducted. As sulfur content increased, the resistance to pitting corrosion decreased due to the formation of numerous manganese sulfides deteriorating the corrosion resistance and an increase in the preferential interface areas for the initiation of the pitting corrosion. With an increase in sulfur content, the tool life increased due to the lubricating films of manganese sulfides adhering to tool surface.

  15. Research on Teachers Pedagogical Thoughts, Judgments, Decisions and Behavior.

    Science.gov (United States)

    Shavelson, Richard J.; Stern, Paula

    1981-01-01

    Based on research done in the past decade, the authors formulated a "schema" of teachers' judgments, planning and interactive decisions. Recommendations for future research included development of a taxonomy of critical teaching decisions, intervention, and alteration of teachers' plans and decisions to improve teaching, and implementation of…

  16. Impact of feed counterion addition and cyclone type on aerodynamic behavior of alginic-atenolol microparticles produced by spray drying.

    Science.gov (United States)

    Ceschan, Nazareth Eliana; Bucalá, Verónica; Ramírez-Rigo, María Verónica; Smyth, Hugh David Charles

    2016-12-01

    The inhalatory route has emerged as an interesting non-invasive alternative for drug delivery. This allows both pulmonary (local) and systemic treatments (via alveolar absorption). Further advantages in terms of stability, dose and patient preference have often lead researchers to focus on dry powder inhaler delivery systems. Atenolol is an antihypertensive drug with low oral bioavailability and gastrointestinal side effects. Because atenolol possesses adequate permeation across human epithelial membranes, it has been proposed as a good candidate for inhalatory administration. In a previous work, atenolol was combined with alginic acid (AA) and microparticles were developed using spray-drying (SD) technology. Different AA/atenolol ratios, total feed solid content and operative variables were previously explored. In order to improve particle quality for inhalatory administration and the SD yield, in this work the AA acid groups not neutralized by atenolol were kept either free or neutralized to pH∼7 and two different SD cyclones were used. Particle morphology, flow properties, moisture uptake and in vitro aerosolization behavior at different pressure drops were studied. When the AA acid groups were neutralized, particle size decreased as a consequence of the lower feed viscosity. The SD yield and in vitro particle deposition significantly increased when a high performance cyclone was employed, and even when lactose carrier particles were not used. Although the in vitro particle deposition decreased when the storage relative humidity increased, the developed SD powders showed adequate characteristics to be administered by inhalatory route up to storage relative humidities of about 60%. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Commentary on: Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research. Problems with atheoretical and confirmatory research approaches in the study of behavioral addictions.

    Science.gov (United States)

    Kardefelt-Winther, Daniel

    2015-09-01

    This commentary is written in response to a paper by Billieux, Schimmenti, Khazaal, Maurage and Hereen (2015) published in the Journal of Behavioral Addictions. It supports and extends the arguments by Billieux, Schimmenti et al. (2015): that the study of behavioral addictions too often rests on atheoretical and confirmatory research approaches. This tends to lead to theories that lack specificity and a neglect of the underlying processes that might explain why repetitive problem behaviors occur. In this commentary I extend the arguments by Billieux, Schimmenti et al. (2015) and argue that such research approaches might take us further away from conceptualizing psychiatric diagnoses that can be properly validated, which is already a problem in the field. Furthermore, I discuss whether the empirical support for conceptualizing repetitive problem behaviors as addictions might rest on research practices that have been methodologically biased to produce a result congruent with the proposal that substance addictions and behavioral addictions share similar traits. I conclude by presenting a number of ways of going forward, chief of which is the proposal that we might wish to go beyond a priori assumptions of addiction in favor of identifying the essential problem manifestations for each new potential behavioral addiction.

  18. Age and impulsive behavior in drug addiction: A review of past research and future directions.

    Science.gov (United States)

    Argyriou, Evangelia; Um, Miji; Carron, Claire; Cyders, Melissa A

    2018-01-01

    Impulsive behavior is implicated in the initiation, maintenance, and relapse of drug-seeking behaviors involved in drug addiction. Research shows that changes in impulsive behavior across the lifespan contribute to drug use and addiction. The goal of this review is to examine existing research on the relationship between impulsive behavior and drug use across the lifespan and to recommend directions for future research. Three domains of impulsive behavior are explored in this review: impulsive behavior-related personality traits, delay discounting, and prepotent response inhibition. First, we present previous research on these three domains of impulsive behavior and drug use across developmental stages. Then, we discuss how changes in impulsive behavior across the lifespan are implicated in the progression of drug use and addiction. Finally, we discuss the relatively limited attention given to middle-to-older adults in the current literature, consider the validity of the measures used to assess impulsive behavior in middle-to-older adulthood, and suggest recommendations for future research. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Research of long-term mechanical displaced behavior of soft rock

    International Nuclear Information System (INIS)

    Inoue, Hiroyuki; Minami, Kosuke

    2003-01-01

    When it thinks about a stratum disposition system of high-level radioactive waste, it is important to evaluate the long-term mechanical displaced behavior of the near field bedrock which is boundary condition of the engineered barrier that should be evaluated based on the reality. In this research, three following examination was carried out for reliability improvement of long-term dynamic deformation behavior estimate. 1) We evaluated the sedimentary rock of Horonobe where we used Okubo model as while changing hydraulic condition and temperature condition. 2) We carried out the model experiment that inner pressure acted on in order to grasp a movement of near field bedrock. 3) We examined model to evaluate that. As a result, the following things were provided. 1) Sedimentary rock of Horonobe is easy to cause strength degradation for being wet and dry cycles. When the rock is saturated after drying, it is broken along potential cracking. The rock reacts for a change of moisture content sensitively. In addition, a variation of the strength occurs in a little depth remainder. This diffuseness gave the strong influence on failure time. 2) Big plastic deformation may not do elasto-plasticity behavior according to theory for stress modification of rock mass. 3) We think with one of the factor that it produces remainder in prediction and real creep hour that these is as 'm = n (conatnt of Okubo model)' simply. Therefore we collect data after peak, and it is necessary to grasp 'm/n'. In addition, it is necessary to improve 'n' in the model which we can change by environment and stress state on the way. (author)

  20. Twenty Years of Research on Cytokine-Induced Sickness Behavior*

    Science.gov (United States)

    Dantzer, Robert; Kelley, Keith W.

    2007-01-01

    Cytokine-induced sickness behavior was recognized within a few years of the cloning and expression of interferon-α, IL-1 and IL-2, which occurred around the time that the first issue of Brain, Behavior, and Immunity was published in 1987. Phase I clinical trials established that injection of recombinant cytokines into cancer patients led to a variety of psychological disturbances. It was subsequently shown that physiological concentrations of proinflammatory cytokines that occur after infection act in the brain to induce common symptoms of sickness, such as loss of appetite, sleepiness, withdrawal from normal social activities, fever, aching joints and fatigue. This syndrome was defined as sickness behavior and is now recognized to be part of a motivational system that reorganizes the organism's priorities to facilitate recovery from the infection. Cytokines convey to the brain that an infection has occurred in the periphery, and this action of cytokines can occur via the traditional endocrine route via the blood or by direct neural transmission via the afferent vagus nerve. The finding that sickness behavior occurs in all mammals and birds indicates that communication between the immune system and brain has been evolutionarily conserved and forms an important physiological adaptive response that favors survival of the organism during infections. The fact that cytokines act in the brain to induce physiological adaptations that promote survival has led to the hypothesis that inappropriate, prolonged activation of the innate immune system may be involved in a number of pathological disturbances in the brain, ranging from Alzheimers' disease to stroke. Conversely, the newly-defined role of cytokines in a wide variety of systemic co-morbid conditions, ranging from chronic heart failure to obesity, may begin to explain changes in the mental state of these subjects. Indeed, the newest findings of cytokine actions in the brain offer some of the first clues about the

  1. State of the art/science: Visual methods and information behavior research

    DEFF Research Database (Denmark)

    Hartel, Jenna; Sonnenwald, Diane H.; Lundh, Anna

    2012-01-01

    This panel reports on methodological innovation now underway as information behavior scholars begin to experiment with visual methods. The session launches with a succinct introduction to visual methods by Jenna Hartel and then showcases three exemplar visual research designs. First, Dianne Sonne...... will have gained: knowledge of the state of the art/science of visual methods in information behavior research; an appreciation for the richness the approach brings to the specialty; and a platform to take new visual research designs forward....

  2. Investigation of Relationship between Organizational Climate and Organizational Citizenship Behavior: A Research on Health Sector

    OpenAIRE

    Serdar Öge; Pınar Erdogan

    2015-01-01

    The main objective of this research is to describe the relationship between organizational climate and organizational citizenship behavior. In order to examine this relationship, a research is intended to be carried out in relevant institutions and organizations operating in the health sector in Turkey. It will be researched that whether there is a statistically significant relationship between organizational climate and organizational citizenship behavior through elated ...

  3. Organizational Behavior in the Knowledge Based Society, a Practical Research in the Romanian Business Environment

    OpenAIRE

    Armenia ANDRONICEANU

    2011-01-01

    The paper contains the results of a special research developed by the author on the organizational behavior in some multinational companies with branches in Romania. This research is confirming the fact that the organizational behavior is very much influenced by the core organizational values and is answering to the questions about how people, individuals, and groups act in organizations and why. The research demonstrated how the core values of an organization are influencing the organization...

  4. Behavior Therapy for Tic Disorders: An Evidenced-based Review and New Directions for Treatment Research

    OpenAIRE

    McGuire, Joseph F.; Ricketts, Emily J.; Piacentini, John; Murphy, Tanya K.; Storch, Eric A.; Lewin, Adam B.

    2015-01-01

    Behavior therapy is an evidenced-based intervention with moderate-to-large treatment effects in reducing tic symptom severity among individuals with Persistent Tic Disorders (PTDs) and Tourette’s Disorder (TD). This review describes the behavioral treatment model for tics, delineates components of evidence-based behavior therapy for tics, and reviews the empirical support among randomized controlled trials for individuals with PTDs or TD. Additionally, this review discusses several challenges...

  5. Microstructure Evolution and Mechanical Behavior of 2219 Aluminum Alloys Additively Fabricated by the Cold Metal Transfer Process

    Directory of Open Access Journals (Sweden)

    Xuewei Fang

    2018-05-01

    Full Text Available In this research, four different welding arc modes including conventional cold metal transfer (CMT, CMT-Pulse (CMT-P, CMT-Advanced (CMT-ADV, and CMT pulse advanced (CMT-PADV were used to deposit 2219-Al wire. The effects of different arc modes on porosity, pore size distribution, microstructure evolution, and mechanical properties were thoroughly investigated. The statistical analysis of the porosity and its size distribution indicated that the CMT-PADV process gave the smallest pore area percentage and pore aspect ratio, and had almost no larger pores. The results from optical microscopy, scanning electron microscopy, and fractographic morphology proved that uniform and fine equiaxed grains, evenly distributed Al2Cu second phase particles were formed during the CMT-PADV process. Furthermore, the X-ray diffraction test ascertained that the CMT-PADV sample had the smallest lattice parameter and the highest solute Cu content. Besides, the tensile strength could reach 283 MPa, the data scattering was the smallest, and the strength scattering of the sample in the horizontal direction was the shortest. In addition, the strength properties were nearly isotropic, with only 5 MPa difference in the vertical and horizontal directions. The above mentioned results indicated that the mechanical properties of 2219 aluminum alloy was improved using the CMT-PADV arc mode.

  6. Microstructure Evolution and Mechanical Behavior of 2219 Aluminum Alloys Additively Fabricated by the Cold Metal Transfer Process.

    Science.gov (United States)

    Fang, Xuewei; Zhang, Lijuan; Li, Hui; Li, Chaolong; Huang, Ke; Lu, Bingheng

    2018-05-16

    In this research, four different welding arc modes including conventional cold metal transfer (CMT), CMT-Pulse (CMT-P), CMT-Advanced (CMT-ADV), and CMT pulse advanced (CMT-PADV) were used to deposit 2219-Al wire. The effects of different arc modes on porosity, pore size distribution, microstructure evolution, and mechanical properties were thoroughly investigated. The statistical analysis of the porosity and its size distribution indicated that the CMT-PADV process gave the smallest pore area percentage and pore aspect ratio, and had almost no larger pores. The results from optical microscopy, scanning electron microscopy, and fractographic morphology proved that uniform and fine equiaxed grains, evenly distributed Al₂Cu second phase particles were formed during the CMT-PADV process. Furthermore, the X-ray diffraction test ascertained that the CMT-PADV sample had the smallest lattice parameter and the highest solute Cu content. Besides, the tensile strength could reach 283 MPa, the data scattering was the smallest, and the strength scattering of the sample in the horizontal direction was the shortest. In addition, the strength properties were nearly isotropic, with only 5 MPa difference in the vertical and horizontal directions. The above mentioned results indicated that the mechanical properties of 2219 aluminum alloy was improved using the CMT-PADV arc mode.

  7. Microstructure Evolution and Mechanical Behavior of 2219 Aluminum Alloys Additively Fabricated by the Cold Metal Transfer Process

    Science.gov (United States)

    Fang, Xuewei; Li, Hui; Li, Chaolong; Lu, Bingheng

    2018-01-01

    In this research, four different welding arc modes including conventional cold metal transfer (CMT), CMT-Pulse (CMT-P), CMT-Advanced (CMT-ADV), and CMT pulse advanced (CMT-PADV) were used to deposit 2219-Al wire. The effects of different arc modes on porosity, pore size distribution, microstructure evolution, and mechanical properties were thoroughly investigated. The statistical analysis of the porosity and its size distribution indicated that the CMT-PADV process gave the smallest pore area percentage and pore aspect ratio, and had almost no larger pores. The results from optical microscopy, scanning electron microscopy, and fractographic morphology proved that uniform and fine equiaxed grains, evenly distributed Al2Cu second phase particles were formed during the CMT-PADV process. Furthermore, the X-ray diffraction test ascertained that the CMT-PADV sample had the smallest lattice parameter and the highest solute Cu content. Besides, the tensile strength could reach 283 MPa, the data scattering was the smallest, and the strength scattering of the sample in the horizontal direction was the shortest. In addition, the strength properties were nearly isotropic, with only 5 MPa difference in the vertical and horizontal directions. The above mentioned results indicated that the mechanical properties of 2219 aluminum alloy was improved using the CMT-PADV arc mode. PMID:29772708

  8. Research on the fracture behavior of PBX under static tension

    Directory of Open Access Journals (Sweden)

    Hu Guo

    2014-06-01

    Full Text Available The fracture behavior of polymer-bonded explosive (PBX seriously affects the safety and reliability of weapon system. The effects of interface debonding and initial meso-damage on the fracture behavior of PBX under quasi-static tension are studied using numerical method. A two-dimensional representative volume element (RVE is established based on Voronoi model in which the component contents could be regulated and the particles are randomly distributed. A nonlinear damage model of polymer matrix relative to matrix depth between particles is constructed. The results show that the simulated strain-stress relation is coincident with experiment data. It is found that interface debonding leads to the nucleation and propagation of meso-cracks, and a main crack approximately perpendicular to the loading direction is generated finally. The interface debonding tends to occur in the interface perpendicular to the loading direction. There seems to be a phenomenon that strain softening and hardening alternatively appear around peak stress of stress and strain curve. It is shown that the initial damages of intragranular and interfacial cracks both decrease the modulus and failure stress, and the main crack tends to propagate toward the initial meso-cracks.

  9. Behavioral and social sciences theories and models: are they used in unintentional injury prevention research?

    Science.gov (United States)

    Trifiletti, L B; Gielen, A C; Sleet, D A; Hopkins, K

    2005-06-01

    Behavioral and social sciences theories and models have the potential to enhance efforts to reduce unintentional injuries. The authors reviewed the published literature on behavioral and social science theory applications to unintentional injury problems to enumerate and categorize the ways different theories and models are used in injury prevention research. The authors conducted a systematic review to evaluate the published literature from 1980 to 2001 on behavioral and social science theory applications to unintentional injury prevention and control. Electronic database searches in PubMed and PsycINFO identified articles that combined behavioral and social sciences theories and models and injury causes. The authors identified some articles that examined behavioral and social science theories and models and unintentional injury topics, but found that several important theories have never been applied to unintentional injury prevention. Among the articles identified, the PRECEDE PROCEED Model was cited most frequently, followed by the Theory of Reasoned Action/Theory of Planned Behavior and Health Belief Model. When behavioral and social sciences theories and models were applied to unintentional injury topics, they were most frequently used to guide program design, implementation or develop evaluation measures; few examples of theory testing were found. Results suggest that the use of behavioral and social sciences theories and models in unintentional injury prevention research is only marginally represented in the mainstream, peer-reviewed literature. Both the fields of injury prevention and behavioral and social sciences could benefit from greater collaborative research to enhance behavioral approaches to injury control.

  10. Information technology and behavioral medicine: impact on autism treatment & research.

    Science.gov (United States)

    Oberleitner, Ron; Laxminarayan, Swamy

    2004-01-01

    Families, clinicians and researchers involved with varying neurological disorders face amazing challenges to understand, treat, and assist the people they are serving. Autism brings unique challenges and serves as an important model for the application of important concepts in information technology and telemedicine. The rising incidence of autism with limited professional resources has led to more consideration for using information technology and related specialties to link families and professionals, and to implement strategies which implement information technology to improve the outcomes for individuals with autism and their families. These are reviewed in context of the unique health, education, and the research issues facing those dealing with autism.

  11. Research on Web Search Behavior: How Online Query Data Inform Social Psychology.

    Science.gov (United States)

    Lai, Kaisheng; Lee, Yan Xin; Chen, Hao; Yu, Rongjun

    2017-10-01

    The widespread use of web searches in daily life has allowed researchers to study people's online social and psychological behavior. Using web search data has advantages in terms of data objectivity, ecological validity, temporal resolution, and unique application value. This review integrates existing studies on web search data that have explored topics including sexual behavior, suicidal behavior, mental health, social prejudice, social inequality, public responses to policies, and other psychosocial issues. These studies are categorized as descriptive, correlational, inferential, predictive, and policy evaluation research. The integration of theory-based hypothesis testing in future web search research will result in even stronger contributions to social psychology.

  12. The Relationship between Spiritual Leadership and Organizational Citizenship Behaviors: A Research on School Principals' Behaviors

    Science.gov (United States)

    Kaya, Ahmet

    2015-01-01

    This study aimed to examine the relationship between Spiritual Leadership and the dimensions of Organizational Citizenship Behaviors (OCB) of school principals from the perspectives of primary school teachers. A quantitative survey was performed on a sample of teachers (N = 383) from primary schools to study the influence of spiritual leadership…

  13. Connecting Consumer Behavior with Marketing Research through Garbology

    Science.gov (United States)

    Damron-Martinez, Datha; Jackson, Katherine L.

    2017-01-01

    Because of the ever-increasing demand by faculty for realistic, experiential-learning exercises easily incorporated into the marketing curriculum, this article offers a new exercise that is based on Parlin's early work in marketing research with Campbell's soup: garbology. Garbology is an entertaining, experiential learning activity that serves as…

  14. Extracting objective estimates of sedentary behavior from accelerometer data: measurement considerations for surveillance and research applications.

    Directory of Open Access Journals (Sweden)

    Youngdeok Kim

    Full Text Available Accelerometer-based activity monitors are widely used in research and surveillance applications for quantifying sedentary behavior (SB and physical activity (PA. Considerable research has been done to refine methods for assessing PA, but relatively little attention has been given to operationalizing SB parameters (i.e., sedentary time and breaks from accelerometer data - particularly in relation to health outcomes. This study investigated: (a the accrued patterns of sedentary time and breaks; and (b the associations of sedentary time and breaks in different bout durations with cardiovascular risk factors.Accelerometer data on 5,917 adults from the National Health Examination and Nutrition Survey (NHANES 2003-2006 were used. Sedentary time and breaks at different bout durations (i.e., 1, 2-4, 5-9, 10-14, 15-19, 20-24, 25-29, and ≥ 30-min were obtained using a threshold of < 100 counts per minute. Sedentary time and breaks were regressed on cardiovascular risk factors (waist circumference, triglyceride, and high-density lipoprotein cholesterol and body mass index across bout durations.The results revealed that the majority of sedentary time occurred within relatively short bout durations (≈ 70% and ≈ 85% for < 5-min and < 10-min, respectively. The associations of sedentary time and breaks with health outcomes varied depending on how bout time was defined. Estimates of SB parameters based on bout durations of 5 min or shorter were associated with reduced cardiovascular risk factors while durations longer than 10-min were generally associated with increased risk factors.The present study demonstrates that the duration of sedentary bouts should be further considered when operationalizing the SB parameters from accelerometer data. The threshold of 5 minutes to define a bout is defensible, but a 10 minute threshold would provide a more conservative estimate to clearly capture the prolonged nature of sedentary behavior. Additional research is

  15. Research and development strategy on the behavior of containments during severe accidents

    International Nuclear Information System (INIS)

    Lecomte, C.

    1990-06-01

    In case of an hypothetical severe accident leading to core melting, the last barrier preventing radionucleide release in the environnment is the containment of the main reactor building. The French research and development programmes aimed at understanding the containment behavior during severe accidents relate to several domains; some of them are: - assessment of hydrogen behavior - corium behavior and coolability - ultimate resistance of the containments and leaktightness - caracterization of filtered venting procedure. All these aspects are covered by code calculations and experimental developments

  16. From appetite setpoint to appetition: 50years of ingestive behavior research.

    Science.gov (United States)

    Sclafani, Anthony

    2018-01-02

    I review the main themes of my 50-year research career in ingestive behavior as a graduate student at the University of Chicago and a professor at the City University of New York. A seminar course with my Ph.D. mentor, S. P. Grossman, sparked my interest in the hypothalamic obesity syndrome. I developed a wire knife to dissect the neuropathways and the functional disorder responsible for the syndrome. An elevated appetite setpoint that permitted the overconsumption of palatable foods appeared central to the hypothalamic syndrome. In brain-intact rats, providing an assortment of highly palatable foods (the cafeteria diet) stimulated diet-induced obesity that mimicked elements of hypothalamic obesity. Studies of the determinants of food palatability led to the discovery of a "new" carbohydrate taste (maltodextrin taste) and the confirmation of a fatty taste. In addition to oral taste receptors, gut nutrient sensors stimulated the intake/preference for carbohydrate- and fat-rich foods via an appetition process that stimulates brain reward systems. My research career greatly benefited from many diligent and creative students, collaborators and technicians and research support from my university and the National Institutes of Health. Copyright © 2018 Elsevier Inc. All rights reserved.

  17. Cross-Country Differences in the Additive Effects of Socioeconomics, Health Behaviors and Medical Comorbidities on Disability among Older Adults with Heart Disease.

    Science.gov (United States)

    Assari, Shervin

    2015-01-01

    Patients with heart disease experience limited activities of daily living (ADL). This is a cross-country comparison of the additive effects of Socioeconomics, health behaviors, and the number of medical comorbidities on disability among patients with heart disease. The current study used a cross-sectional design. Data came from the Research on Early Life and Aging Trends and Effects (RELATE). The current analysis utilized data on elderly individuals (age ≥60 y) from 13 countries. The outcome was any ADL limitation (i.e. bathing, dressing, using toilet, transferring, lifting heavy things, shopping, and eating meals). Socioeconomics (i.e. age, gender, education, and income), health behaviors (i.e. exercise, smoking, and drinking), and number of chronic medical conditions (i.e. hypertension, respiratory, arthritis, stroke, and diabetes) were entered into country-specific logistic regressions, considering at least one limitation in ADL as the main outcome. Number of comorbid medical conditions and age were positively associated with disability in 85% of the countries. Physical activity and drinking were linked to disability in 54%and 31% of countries, respectively. Higher education and income were associated with lower disability in 31% and 23% of the countries, respectively. Female gender was associated with higher disability only in 15% of the countries. Smoking was not associated with disability, while the effects of socioeconomics, drinking, exercise, and medical comorbidities were controlled. Determinants of disability depend on the country; accordingly, locally designed health promotion interventions may be superior to the universal interventions for patients with heart disease. Medical comorbidities, however, should be universally diagnosed and treated.

  18. Status of USNRC research on fuel behavior under accident conditions

    International Nuclear Information System (INIS)

    Johnston, W.V.

    1976-01-01

    The program of the Fuel Behaviour Research is directed at providing a detailed understanding of the response of nuclear fuel assemblies to off-normal or accident conditions. This understanding is expressed in physical and analytical correlations which are incorporated into computer codes. The results of these experiments and the resulting codes are available to the licensing authorities for use in evaluating utility submissions. (orig.) [de

  19. Wastes behavior and environmental impacts, researches and methods

    International Nuclear Information System (INIS)

    Labeyrie, J.; Chateau, L.; Gin, St.

    2001-01-01

    The wastes management policy takes into account more and more often the environmental impacts mastership. This evolution is particularly appreciable when the wastes directly interact with the environment: storage, utilization for roads construction and so on. In this context the ADEME organized the 8 june 2000 a colloquium to present the new evaluation methods and tools, to describe the regulations and to identify the research programs needed for this environmental policy. Eleven papers are presented. (A.L.B.)

  20. Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing.

    Science.gov (United States)

    Ji, Lei; Lu, Jiping; Tang, Shuiyuan; Wu, Qianru; Wang, Jiachen; Ma, Shuyuan; Fan, Hongli; Liu, Changmeng

    2018-06-28

    Wire feeding additive manufacturing (WFAM) has broad application prospects because of its advantages of low cost and high efficiency. However, with the mode of lateral wire feeding, including wire and laser additive manufacturing, gas tungsten arc additive manufacturing etc., it is easy to generate macro defects on the surface of the components because of the anisotropy of melted wire, which limits the promotion and application of WFAM. In this work, gas tungsten arc additive manufacturing with lateral wire feeding is proposed to investigate the mechanisms of macro defects. The results illustrate that the defect forms mainly include side spatters, collapse, poor flatness, and unmelted wire. It was found that the heat input, layer thickness, tool path, and wire curvature can have an impact on the macro defects. Side spatters are the most serious defects, mainly because the droplets cannot be transferred to the center of the molten pool in the lateral wire feeding mode. This research indicates that the macro defects can be controlled by optimizing the process parameters. Finally, block parts without macro defects were fabricated, which is meaningful for the further application of WFAM.

  1. Research Review: A Critical Review of Studies on the Developmental Trajectories of Antisocial Behavior in Females

    Science.gov (United States)

    Fontaine, Nathalie; Carbonneau, Rene; Vitaro, Frank; Barker, Edward D.; Tremblay, Richard E.

    2009-01-01

    Background: Knowledge on the onset and the development of antisocial behavior in females is limited, because most of the research in this domain is based on males. Methods: We critically reviewed 46 empirical studies that examined developmental trajectories of antisocial behavior in females, notably to help determine whether or not an…

  2. The ENDORSE study: Research into environmental determinants of obesity related behaviors in Rotterdam schoolchildren

    NARCIS (Netherlands)

    K.A. van der Horst-Nachtegaal (Klazine); A. Oenema (Anke); P.M. van de Looij-Jansen (Petra); J. Brug (Hans)

    2008-01-01

    textabstractBackground: Children and adolescents are important target groups for prevention of overweight and obesity as overweight is often developed early in life and tracks into adulthood. Research into behaviors related to overweight (energy balance-related behaviors) and the personal

  3. Recent Research on Emergent Verbal Behavior: Clinical Applications and Future Directions

    Science.gov (United States)

    Grow, Laura L.; Kodak, Tiffany

    2010-01-01

    Previous research on the acquisition of verbal behavior in children with developmental disabilities has focused on teaching four primary verbal operants: (1) "mand"; (2) "tact"; (3) "echoic"; and (4) "intraverbal". In Skinner's (1957) analysis of verbal behavior, he stated that each verbal operant is maintained by unique antecedent and consequence…

  4. Ethical Issues Associated with the Use of Animal Experimentation in Behavioral Neuroscience Research

    NARCIS (Netherlands)

    Ohl, Frauke; Meijboom, Franck

    2015-01-01

    This chapter briefly explores whether there are distinct characteristics in the field of Behavioral Neuroscience that demand specific ethical reflection. We argue that although the ethical issues in animal-based Behavioral Neuroscience are not necessarily distinct from those in other research

  5. The social control of behavior control: behavior modification, Individual Rights, and research ethics in America, 1971-1979.

    Science.gov (United States)

    Rutherford, Alexandra

    2006-01-01

    In 1971, the U.S. Senate Subcommittee on Constitutional Rights began a three-year study to investigate the federal funding of all research involving behavior modification. During this period, operant programs of behavior change, particularly those implemented in closed institutions, were subjected to specific scrutiny. In this article, I outline a number of scientific and social factors that led to this investigation and discuss the study itself. I show how behavioral scientists, both individually and through their professional organizations, responded to this public scrutiny by (1) self-consciously altering their terminology and techniques; (2) considering the need to more effectively police their professional turf; and (3) confronting issues of ethics and values in their work. Finally, I link this episode to the formation of the National Commission for the Protection of Human Subjects of Biomedical and Behavioral Research, whose recommendations resulted in changes to the ethical regulation of federally funded human subjects research that persist to the present day. (c) 2006 Wiley Periodicals, Inc.

  6. Gestational flu exposure induces changes in neurochemicals, affiliative hormones and brainstem inflammation, in addition to autism-like behaviors in mice.

    Science.gov (United States)

    Miller, V M; Zhu, Y; Bucher, C; McGinnis, W; Ryan, L K; Siegel, A; Zalcman, S

    2013-10-01

    The prevalence of neurodevelopmental disorders such as autism is increasing, however the etiology of these disorders is unclear and thought to involve a combination of genetic, environmental and immune factors. A recent epidemiological study found that gestational viral exposure during the first trimester increases risk of autism in offspring by twofold. In mice gestational viral exposures alter behavior of offspring, but the biological mechanisms which underpin these behavioral changes are unclear. We hypothesized that gestational viral exposure induces changes in affiliative hormones, brainstem autonomic nuclei and neurotransmitters which are associated with behavioral alterations in offspring. To address this hypothesis, we exposed pregnant mice to influenza A virus (H3N2) on gestational day 9 and determined behavioral, hormonal and brainstem changes in male and female offspring. We found that gestational flu exposure induced dose-dependent alterations in social and aggressive behaviors (p≤0.05) in male and female offspring and increases in locomotor behaviors particularly in male offspring (p≤0.05). We found that flu exposure was also associated with reductions in oxytocin and serotonin (p≤0.05) levels in male and female offspring and sex-specific changes in dopamine metabolism. In addition we found changes in catecholaminergic and microglia density in brainstem tissues of male flu exposed offspring only (p≤0.05). This study demonstrates that gestational viral exposure induces behavioral changes in mice, which are associated with alterations in affiliative hormones. In addition we found sex-specific changes in locomotor behavior, which may be associated with sex-specific alterations in dopamine metabolism and brainstem inflammation. Further investigations into maternal immune responses are necessary to unravel the molecular mechanisms which underpin abnormal hormonal, immune and behavioral responses in offspring after gestational viral exposure

  7. Cross-Cultural Psychology as a Scholarly Discipline: On the Flowering of Culture in Behavioral Research.

    Science.gov (United States)

    Segall, Marshall H.; Lonner, Walter J.; Berry, John W.

    1998-01-01

    Examines interrelationship of culture and behavior. Perspectives include absolutism and relativism, each with methodological consequences for such research concerns as values gender differences, cognition, aggression, intergroup relations, and psychological acculturation. Describes societal concerns relating to these topics. Contains 88…

  8. An Affective Events Model of Charismatic Leadership Behavior : A Review, Theoretical Integration, and Research Agenda

    NARCIS (Netherlands)

    Walter, Frank; Bruch, Heike

    2009-01-01

    Although research has long focused on the consequences of leaders' charismatic behavior, the antecedents of such leadership are increasingly gaining scholarly attention. Nevertheless, the antecedent-oriented literature on charismatic leadership has been fragmented to date and lacks theoretical

  9. The Addition of Spiritual Dimension on Customer Value to Investigate the Relationship of Customer Value, Customer Satisfaction and Behavior Intention on Islamic Banks Saving Products in Indonesia

    OpenAIRE

    Adi Zakaria Afiff; Rifelly Dewi Astuti

    2009-01-01

    This study propose the addition of a spiritual dimension in the formation of customer value, in addition to the functional, social and emotional dimension of customer value that has already been empirically tested in previous studies, among customers who own saving products at Islamic banks in Indonesia. The study also investigate the relationship between customer value and customer satisfaction, and the relationship between customer satisfaction and customer behavioral intentions among these...

  10. Study on effects of coupled phenomenon on long-term behavior for crystalline rock (Joint research)

    International Nuclear Information System (INIS)

    Kimoto, Kazushi; Ichikawa, Yasuaki; Matsui, Hiroya

    2017-11-01

    It is important to evaluate the stability of a repository for high-level radioactive waste not only during the design, construction and operation phases, but also during the post-closure period, for time frames likely exceeding several millennia or longer. The rock mass around the tunnels could be deformed through time in response to time dependent behavior such as creep and stress relaxation. On the other hand, it was revealed that chemical reaction of groundwater in rock has an influence on the long-term behavior. Therefore, an evaluation of the microcracks influencing on rock mechanical and chemical coupled phenomena is the issue to understand the past long-term behavior of rock mass. In view of above points, this study has been started as joint research with Okayama University from Fiscal Year 2016. In Fiscal Year 2016, several kinds of elastic wave velocity were measured using ultra sonic sensors and laser Doppler vibrometer to evaluate the anisotropy of different elastic wave in granite. The velocity measurements were carried out focused on transmitted wave and surface wave. The results showed that strong anisotropy was observed in transmitted P-wave velocity while weak anisotropy was observed in transmitted S-wave and group velocity estimated by surface velocity measurement. In addition, data obtained from surface velocity measurement was partitioned into transmitted and reflected waves and analyzed them in detail. It resulted that elastic wave due to mineral particles to compose granite was dispersed; however, significant dispersion was only observed at specific location. For the future study, understanding of the relationship between density and anisotropy of micro cracks also anisotropy and strong dispersion of group velocity is important subject to estimate the geometrical distribution of micro cracks in granitic rock. (author)

  11. Cyberbullying Victimization and Behaviors Among Girls: Applying Research Findings in the Field

    OpenAIRE

    Patricia A. Snell; Elizabeth K. Englander

    2010-01-01

    Problem statement: Prior research on cyberbullying has been conducted; however specific research on gender differences has yet to be examined. The current study focuses on gender trends, specifically females, in cyberbullying victimization and behaviors. Approach: A survey was given to undergraduate students at Bridgewater State College in an effort to see what gender trends exist in cyberbullying behaviors. A pilot program focused on girls and cyberbullying is also examined in this article. ...

  12. A STUDY ON THE SHAREHOLDERS’ BEHAVIOR OF LISTED COMPANIES BASED ON SYMBIOSIS THEORY: A RESEARCH FRAMEWORK

    OpenAIRE

    YANG Songling; LIU Tingli; CHEN Fang

    2014-01-01

    Research on shareholder’s behavior is a hot topic in recent years. Most researches are based on the theory of agency, which proposal that equity decentralization is the major way to solve the conflict problem between large shareholders and minority stockholders. Actually, major shareholder will never be eliminated. This paper introduces the symbiosis theory-ecology theory-to explain the motives and consequences of the behavior of different type shareholders in China’s from a new perspective. ...

  13. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  14. 3D additive-manufactured nanocomposite magnetic scaffolds: Effect of the application mode of a time-dependent magnetic field on hMSCs behavior

    Directory of Open Access Journals (Sweden)

    Ugo D'Amora

    2017-09-01

    The aim of the present study was to analyze the effect of the application mode of a time-dependent magnetic field on the behavior of human mesenchymal stem cells (hMSCs seeded on 3D additive-manufactured poly(ɛ-caprolactone/iron-doped hydroxyapatite (PCL/FeHA nanocomposite scaffolds.

  15. Recruiting Young Adult Cancer Survivors for Behavioral Research

    Science.gov (United States)

    Horowitz, Santina; Marcus, Bess

    2012-01-01

    Young adults have been dramatically underrepresented in cancer survivorship research. One contributing factor is the difficulty recruiting this population. To identify effective recruitment strategies, the current study assessed the yield of strategies used to recruit young survivors for an exercise intervention including: clinic-based recruitment, recruitment at cancer-related events, mailings, telephone-based recruitment, advertising on the internet, radio, television and social networking media, distributing brochures and word-of-mouth referrals. When taking into account the strategies for which we could track the number of survivors approached, recruitment at an oncology clinic was the most productive: 38 % of those approached were screened and 8 % enrolled. When evaluating which strategy yielded the greatest percentage of the sample, however, mailings were the most productive. Given widespread use of the internet and social networking by young adults, investigators should also consider these low-cost recruitment strategies. PMID:22810954

  16. QUANTITATIVE RESEARCH ON CONSUMER BEHAVIOR BY OPTICAL RED WINE MARKETING

    Directory of Open Access Journals (Sweden)

    Roxana STOIAN

    2014-10-01

    Full Text Available Study exhaustive wine area is a frequently researched topic since the beginning of 2000 when it comes to legislative bases for wine and wine products. Among the considerations that led to its choice of study include: Romania considerable resources in terms of agricultural area, and especially the wine (mention here the existence of eight wine regions, vineyards and a hundred thirty seven support and attention given to the legislative branch of Romanian wine (by law 244/2002-Legea vineyard and wine, and the European and not least history as a wine producing country with Spain, Italy and France. The paper aims to determine whether or not a situation determinant of marketing in red wine consumption by analyzing questionnaire responses developed.

  17. Recruiting young adult cancer survivors for behavioral research.

    Science.gov (United States)

    Rabin, Carolyn; Horowitz, Santina; Marcus, Bess

    2013-03-01

    Young adults have been dramatically underrepresented in cancer survivorship research. One contributing factor is the difficulty recruiting this population. To identify effective recruitment strategies, the current study assessed the yield of strategies used to recruit young survivors for an exercise intervention including: clinic-based recruitment, recruitment at cancer-related events, mailings, telephone-based recruitment, advertising on the internet, radio, television and social networking media, distributing brochures and word-of-mouth referrals. When taking into account the strategies for which we could track the number of survivors approached, recruitment at an oncology clinic was the most productive: 38 % of those approached were screened and 8 % enrolled. When evaluating which strategy yielded the greatest percentage of the sample, however, mailings were the most productive. Given widespread use of the internet and social networking by young adults, investigators should also consider these low-cost recruitment strategies.

  18. Predicting self-reported research misconduct and questionable research practices in university students using an augmented Theory of Planned Behavior

    Science.gov (United States)

    Rajah-Kanagasabai, Camilla J.; Roberts, Lynne D.

    2015-01-01

    This study examined the utility of the Theory of Planned Behavior model, augmented by descriptive norms and justifications, for predicting self-reported research misconduct and questionable research practices in university students. A convenience sample of 205 research active Western Australian university students (47 male, 158 female, ages 18–53 years, M = 22, SD = 4.78) completed an online survey. There was a low level of engagement in research misconduct, with approximately one in seven students reporting data fabrication and one in eight data falsification. Path analysis and model testing in LISREL supported a parsimonious two step mediation model, providing good fit to the data. After controlling for social desirability, the effect of attitudes, subjective norms, descriptive norms and perceived behavioral control on student engagement in research misconduct and questionable research practices was mediated by justifications and then intention. This revised augmented model accounted for a substantial 40.8% of the variance in student engagement in research misconduct and questionable research practices, demonstrating its predictive utility. The model can be used to target interventions aimed at reducing student engagement in research misconduct and questionable research practices. PMID:25983709

  19. A Research on Class Teachers Related to Determining the Effects of Consumers’ Personal Values on Sustainable Consumption Behavior

    Directory of Open Access Journals (Sweden)

    Rıdvan Karalar

    2010-06-01

    Full Text Available The world’s sources about to running out have been realised as a result of that population increase and economic development to be lived in the twentieth century have caused the transformation from the notion of unlimited economic development to sustainable development notion. Sustainable development is a model that predicts existing generation satisfies their needs without that next generation’s satisfy their need. Projection of sustainable development on marketing area have been actualized by means of coming up with sustainable marketing approach. Sustainable marketing approach predict to create sustainable solutions by adding conformity with eco-system in addition to achieving organizational goals and satisfy consumers’ needs which traditional marketing’s goals. The target of sustainable development notion in regard of consumption is to be accepted sustainable consumption behavior. It requires inquiring factors affecting behavior in question because sustainable consumption pattern to be accepted and spread to the world. In the study examined that individual values affecting sustainable consumption behavior of class teacher who work at elementary schools in Kutahya, Merkez. The findings indicate the significant effect of universalism and security values type in sustainable consumption behavior. Also, it is found that frequency of sustainable consumption behavior is mid-level. The results of this research have significant implications for stakeholders of sustainable consumption and future research.

  20. Research on Factors Influencing Individual's Behavior of Energy Management

    Science.gov (United States)

    Fan, Yanfeng

    With the rapid rise of distributed generation, Internet of Things, and mobile Internet, both U.S. and European smart home manufacturers have developed energy management solutions for individual usage. These applications help people manage their energy consumption more efficiently. Domestic manufacturers have also launched similar products. This paper focuses on the factors influencing Energy Management Behaviour (EMB) at the individual level. By reviewing academic literature, conducting surveys in Beijing, Shanghai and Guangzhou, the author builds an integrated behavioural energy management model of the Chinese energy consumers. This paper takes the vague term of EMB and redefines it as a function of two separate behavioural concepts: Energy Management Intention (EMI), and the traditional Energy Saving Intention (ESI). Secondly, the author conducts statistical analyses on these two behavioural concepts. EMI is the main driver behind an individual's EMB. EMI is affected by Behavioural Attitudes, Subjective Norms, and Perceived Behavioural Control (PBC). Among these three key factors, PBC exerts the strongest influence. This implies that the promotion of the energy management concept is mainly driven by good application user experience (UX). The traditional ESI also demonstrates positive influence on EMB, but its impact is weaker than the impacts arising under EMI's three factors. In other words, the government and manufacturers may not be able to change an individual's energy management behaviour if they rely solely on their traditional promotion strategies. In addition, the study finds that the government may achieve better promotional results by launching subsidies to the manufacturers of these kinds of applications and smart appliances.

  1. Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions

    Energy Technology Data Exchange (ETDEWEB)

    Jia, Ruiling, E-mail: jrl014014@163.com [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China); Zhang, Ming; Zhang, Lina [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China); Zhang, Wei [Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Guo, Feng [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China)

    2015-06-15

    Highlights: • The effect of Y addition into the AZ91 Mg alloys was investigated. • Initial stage of corrosion was studied by in-situ 3D digital microscopy observation. • The potential difference was investigated by Kelvin probe force microscopy. • The effect of Y addition on the corrosion mechanisms of AZ91 alloy was studied. - Abstract: Microstructure characterization of the AZ91 magnesium alloys with or without rare earth element yttrium (Y) has been revealed by SEM, EDS and EPMA. Some Y-rich phases can be found in the magnesium alloys with Y additions. The fraction of β-Mg{sub 17}Al{sub 12} phase obvious decreases and turns into granular distribution with the increase of Y addition instead of original wet distribution along grain boundaries. The results of the potentiodynamic polarization tests show that the corrosion resistance of AZ91 alloy is improved with appropriate Y additions. But an in-situ observation of 3D digital microscopy for the initial stage of corrosion of the magnesium alloy with 0.9%Y addition shows that Y-rich phases act as cathodic effect and the α phases in the vicinity of them acting as anode are corroded. So the additions of Y have a beneficial effect that can depress the overall corrosion of AZ91 alloy, whereas its harmful effect is related to Y-rich phases because they present the highest Volta potential difference from the adjacent matrix and they can drive galvanic corrosion.

  2. Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions

    International Nuclear Information System (INIS)

    Jia, Ruiling; Zhang, Ming; Zhang, Lina; Zhang, Wei; Guo, Feng

    2015-01-01

    Highlights: • The effect of Y addition into the AZ91 Mg alloys was investigated. • Initial stage of corrosion was studied by in-situ 3D digital microscopy observation. • The potential difference was investigated by Kelvin probe force microscopy. • The effect of Y addition on the corrosion mechanisms of AZ91 alloy was studied. - Abstract: Microstructure characterization of the AZ91 magnesium alloys with or without rare earth element yttrium (Y) has been revealed by SEM, EDS and EPMA. Some Y-rich phases can be found in the magnesium alloys with Y additions. The fraction of β-Mg 17 Al 12 phase obvious decreases and turns into granular distribution with the increase of Y addition instead of original wet distribution along grain boundaries. The results of the potentiodynamic polarization tests show that the corrosion resistance of AZ91 alloy is improved with appropriate Y additions. But an in-situ observation of 3D digital microscopy for the initial stage of corrosion of the magnesium alloy with 0.9%Y addition shows that Y-rich phases act as cathodic effect and the α phases in the vicinity of them acting as anode are corroded. So the additions of Y have a beneficial effect that can depress the overall corrosion of AZ91 alloy, whereas its harmful effect is related to Y-rich phases because they present the highest Volta potential difference from the adjacent matrix and they can drive galvanic corrosion

  3. Parasite-altered feeding behavior in insects: integrating functional and mechanistic research frontiers.

    Science.gov (United States)

    Bernardo, Melissa A; Singer, Michael S

    2017-08-15

    Research on parasite-altered feeding behavior in insects is contributing to an emerging literature that considers possible adaptive consequences of altered feeding behavior for the host or the parasite. Several recent ecoimmunological studies show that insects can adaptively alter their foraging behavior in response to parasitism. Another body of recent work shows that infection by parasites can change the behavior of insect hosts to benefit the parasite; manipulations of host feeding behavior may be part of this phenomenon. Here, we address both the functional and the underlying physiological frontiers of parasite-altered feeding behavior in order to spur research that better integrates the two. Functional categories of parasite-altered behavior that are adaptive for the host include prophylaxis, therapy and compensation, while host manipulation is adaptive for the parasite. To better understand and distinguish prophylaxis, therapy and compensation, further study of physiological feedbacks affecting host sensory systems is especially needed. For host manipulation in particular, research on mechanisms by which parasites control host feedbacks will be important to integrate with functional approaches. We see this integration as critical to advancing the field of parasite-altered feeding behavior, which may be common in insects and consequential for human and environmental health. © 2017. Published by The Company of Biologists Ltd.

  4. Development and interval testing of a naturalistic driving methodology to evaluate driving behavior in clinical research.

    Science.gov (United States)

    Babulal, Ganesh M; Addison, Aaron; Ghoshal, Nupur; Stout, Sarah H; Vernon, Elizabeth K; Sellan, Mark; Roe, Catherine M

    2016-01-01

    Background : The number of older adults in the United States will double by 2056. Additionally, the number of licensed drivers will increase along with extended driving-life expectancy. Motor vehicle crashes are a leading cause of injury and death in older adults. Alzheimer's disease (AD) also negatively impacts driving ability and increases crash risk. Conventional methods to evaluate driving ability are limited in predicting decline among older adults. Innovations in GPS hardware and software can monitor driving behavior in the actual environments people drive in. Commercial off-the-shelf (COTS) devices are affordable, easy to install and capture large volumes of data in real-time. However, adapting these methodologies for research can be challenging. This study sought to adapt a COTS device and determine an interval that produced accurate data on the actual route driven for use in future studies involving older adults with and without AD.  Methods : Three subjects drove a single course in different vehicles at different intervals (30, 60 and 120 seconds), at different times of day, morning (9:00-11:59AM), afternoon (2:00-5:00PM) and night (7:00-10pm). The nine datasets were examined to determine the optimal collection interval. Results : Compared to the 120-second and 60-second intervals, the 30-second interval was optimal in capturing the actual route driven along with the lowest number of incorrect paths and affordability weighing considerations for data storage and curation. Discussion : Use of COTS devices offers minimal installation efforts, unobtrusive monitoring and discreet data extraction.  However, these devices require strict protocols and controlled testing for adoption into research paradigms.  After reliability and validity testing, these devices may provide valuable insight into daily driving behaviors and intraindividual change over time for populations of older adults with and without AD.  Data can be aggregated over time to look at changes

  5. Effect of Sn addition on the corrosion behavior of Ti-7Cu-Sn cast alloys for biomedical applications.

    Science.gov (United States)

    Tsao, L C

    2015-01-01

    The aim of this study was to investigate the effects of Sn content on the microstructure and corrosion resistance of Ti7CuXSn (x=0-5 wt.%) samples. The corrosion tests were carried out in 0.9 wt.% NaCl solution at 25 °C. The electrochemical corrosion behavior of the Ti7CuXSn alloy samples was evaluated using potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), and equivalent circuit analysis. The resulting impedance parameters and polarization curves showed that adding Sn improved the electrochemical corrosion behavior of the Ti7CuXSn alloy. The Ti7CuXSn alloy samples were composed of a dual-layer oxide consisting of an inner barrier layer and an outer porous layer. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. RESEARCH OF RELATIONSHIP BETWEEN LEADERSHIP BEHAVIORS OF MANAGERS AND ORGANIZATIONAL COMMITMENT OF EMPLOYEES USING STATISTICAL METHODS

    Directory of Open Access Journals (Sweden)

    Aydoğan Durmuş

    2016-08-01

    Full Text Available In this study conducted to research the relationship between leadership behaviors of managers between organizational commitment of employees, a survey has been applied to 155 employees who work in 3 companies in Istanbul province. To measure organizational commitment of employees: "Organizational Commitment Scale" developed by Meyer, Allen ve Smith ; to measure leadership behaviors:" Leadership Behaviors Inventory" of Kent and "Multidimensional Leadership Problems" titled survey forms have been examined and leadership behavior scale which is often used in researches and has been created developing leadership behavior questions based on "Behavioral Repertoire of Leaders" of  Goleman. The data collected by the survey were evaluated by entering into SPSS 22 software. As a result of the application; it has been found that, as autocratic, visionary,  participating and leadership behaviors of managers strengthen, attendance to corporation and normative commitment of employees increase, as educational and relationship oriented behaviors of managers strengthen, attendance to corporation and normative commitment of employees strengthens. As overall satisfaction level of employees with leadership behavior of managers increases, their attendance and normative commitment to organization increased as well.

  7. A crowdsourced nickel-and-dime approach to analog OBM research: A behavioral economic framework for understanding workforce attrition.

    Science.gov (United States)

    Henley, Amy J; DiGennaro Reed, Florence D; Reed, Derek D; Kaplan, Brent A

    2016-09-01

    Incentives are a popular method to achieve desired employee performance; however, research on optimal incentive magnitude is lacking. Behavioral economic demand curves model persistence of responding in the face of increasing cost and may be suitable to examine the reinforcing value of incentives on work performance. The present use-inspired basic study integrated an experiential human operant task within a crowdsourcing platform to evaluate the applicability of behavioral economics for quantifying changes in workforce attrition. Participants included 88 Amazon Mechanical Turk Workers who earned either a $0.05 or $0.10 incentive for completing a progressively increasing response requirement. Analyses revealed statistically significant differences in breakpoint between the two groups. Additionally, a novel translation of the Kaplan-Meier survival-curve analyses for use within a demand curve framework allowed for examination of elasticity of workforce attrition. Results indicate greater inelastic attrition in the $0.05 group. We discuss the benefits of a behavioral economic approach to modeling employee behavior, how the metrics obtained from the elasticity of workforce attrition analyses (e.g., P max ) may be used to set goals for employee behavior while balancing organizational costs, and how economy type may have influenced observed outcomes. © 2016 Society for the Experimental Analysis of Behavior.

  8. Interaction of mathematical modeling and social and behavioral HIV/AIDS research.

    Science.gov (United States)

    Cassels, Susan; Goodreau, Steven M

    2011-03-01

    HIV is transmitted within complex biobehavioral systems. Mathematical modeling can provide insight to complex population-level outcomes of various behaviors measured at an individual level. HIV models in the social and behavioral sciences can be categorized in a number of ways; here, we consider two classes of applications common in the field generally, and in the past year in particular: those models that explore significant behavioral determinants of HIV disparities within and between populations; and those models that seek to evaluate the potential impact of specific social and behavioral interventions. We discuss two overarching issues we see in the field: the need to further systematize effectiveness models of behavioral interventions, and the need for increasing investigation of the use of behavioral data in epidemic models. We believe that a recent initiative by the National Institutes of Health will qualitatively change the relationships between epidemic modeling and sociobehavioral prevention research in the coming years.

  9. Effects of Rhenium Addition on the Temporal Evolution of the Nanostructure and Chemistry of a Model Ni-Cr-Al Superalloy. 2; Analysis of the Coarsening Behavior

    Science.gov (United States)

    Yoon, Kevin E.; Noebe, Ronald D.; Seidman, David N.

    2007-01-01

    The temporal evolution of the nanostructure and chemistry of a model Ni-8.5 at.% Cr-10 at.% Al alloy with the addition of 2 at.% Re was studied using transmission electron microscopy and atom-probe tomography in order to measure the number density and mean radius of the y' (LIZ) precipitates and the chemistry of the y'-precipitates and the y (fcc)-matrix. In this article, the coarsening behavior of the y'-precipitates is discussed in detail and compared with the Umantsev-Olson model for multi-component alloys. In addition, the experimental results are evaluated with PrecipiCalc(TradeMark) simulations. The results show that the diffusivities of the solute elements play a major role in the coarsening behavior of the y'-precipitates and that the addition of Re retards the coarsening kinetics and stabilizes the spheroidal morphology of the precipitates by reducing the interfacial energy.

  10. Challenge in Sharing Tacit Knowledge: Academicians’ Behavior towards Developing A Web Portal for Sharing Research Ideas

    Directory of Open Access Journals (Sweden)

    Hafiza Adenan

    2013-08-01

    Full Text Available Academicians’ collective memories soft information, such as research ideas, expertise, experiences, academic skills, know-what, know-how and know-why which inevitability it is considered should made accessible. The Higher Education Institution needs to identify, collect, classify, verbalize and diffuse the academicians’ soft information specifically research ideas present in the university for knowledge enrichment. This can be implemented by the academicians actively sharing their research ideas with others. Actively sharing research ideas by academicians will have great impact on the enrichment of their intellectual capability as most of the valuable knowledge resides in one’s brain. However, as there is no specific medium to bring their research ideas into the surface and be visible to others, the precious research ideas still remain in the academicians’ brains. Therefore, the objective of the study is to explore academicians’ behavior toward the development of a sharing research ideas web portal at private university colleges in Malaysia. This study used the qualitative method that is a multiple cases study. The study refers to four private university colleges in Malaysia. In-depth interview, focus group discussion and document analysis were formed the data collection for this study. The theory of Planned Behavior by Ajzen (1991 was used to determine academicians’ behavior. This study showed that the academicians’ attitude, subjective norms, and perceived behavioral control towards developing a web portal for sharing research ideas all affect their intention to share their research ideas with others.

  11. Effect of rice husk ash addition on CO2 capture behavior of calcium-based sorbent during calcium looping cycle

    International Nuclear Information System (INIS)

    Li, Yingjie; Zhao, Changsui; Ren, Qiangqiang; Duan, Lunbo; Chen, Huichao; Chen, Xiaoping

    2009-01-01

    Rice husk ash/CaO was proposed as a CO 2 sorbent which was prepared by rice husk ash and CaO hydration together. The CO 2 capture behavior of rice husk ash/CaO sorbent was investigated in a twin fixed bed reactor system, and its apparent morphology, pore structure characteristics and phase variation during cyclic carbonation/calcination reactions were examined by SEM-EDX, N 2 adsorption and XRD, respectively. The optimum preparation conditions for rice husk ash/CaO sorbent are hydration temperature of 75 C, hydration time of 8 h, and mole ratio of SiO 2 in rice husk ash to CaO of 1.0. The cyclic carbonation performances of rice husk ash/CaO at these preparation conditions were compared with those of hydrated CaO and original CaO. The temperature at 660 C-710 C is beneficial to CO 2 absorption of rice husk ash/CaO, and it exhibits higher carbonation conversions than hydrated CaO and original CaO during multiple cycles at the same reaction conditions. Rice husk ash/CaO possesses better anti-sintering behavior than the other sorbents. Rice husk ash exhibits better effect on improving cyclic carbonation conversion of CaO than pure SiO 2 and diatomite. Rice husk ash/CaO maintains higher surface area and more abundant pores after calcination during the multiple cycles; however, the other sorbents show a sharp decay at the same reaction conditions. Ca 2 SiO 4 found by XRD detection after calcination of rice husk ash/CaO is possibly a key factor in determining the cyclic CO 2 capture behavior of rice husk ash/CaO. (author)

  12. Corrosion Behavior of PEO Coatings Formed on AZ31 Alloy in Phosphate-Based Electrolytes with Calcium Acetate Additive

    Science.gov (United States)

    Ziyaei, E.; Atapour, M.; Edris, H.; Hakimizad, A.

    2017-07-01

    The PEO coating started on magnesium AZ31 using a unipolar DC power source. The coating was generated in the electrolyte based on Na3PO4·12H2O and KOH with calcium acetate as additive. The x-ray diffraction method showed some phases containing calcium and phosphate, which was created in the presence of additive. Also, the EDS tests of the sample's surfaces proved the existence of calcium on the surface. Based on the electrochemical tests results, the most corrosion resistance belongs to the sample with calcium acetate additive. In fact, the results of the EIS tests showed the coating with calcium acetate has the highest resistance but the lowest capacitance. However, this state belongs to the surface morphology, the lower porosity, and surface chemical composition.

  13. Effect of Ti and Nb Addition on Precipitation and Sensitization Behavior in Ferritic Stainless Steel Welded Joint

    International Nuclear Information System (INIS)

    Kim, Jong Min; Lee, Hae Woo

    2013-01-01

    The precipitation and sensitization characteristics in AISI436 weld metal were investigated in different chemical composition ranges of Ti and Nb content. We manufactured four welding wires made of 0-0.2 wt% of Ti and 0-1.0 wt% of Nb and did flux cored arc welding. After heat treatment at 900 °C for 20 hours, we made a Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test, Electron Backscattering Diffraction and SEM. The DL-EPR test revealed that as the amount of addition of Ti and Nb rose, the degree of sensitization fell. The microstructure became more refined, and Cr carbide formed at the grain boundary that had no addition of Ti and Nb. Furthermore, in the specimen with the addition of Ti, Nb, the Ti, Nb carbide and nitride were precipitated in the intergranular boundary, and the laves phase was precipitated at the grain boundary.

  14. The Behavioral Science of Eating : Encouraging Boundary Research That Has Impact

    NARCIS (Netherlands)

    van Ittersum, Koert; Wansink, B.

    2016-01-01

    Boundary research can be risky, but it can also move academic disciplines into wider areas of influence. Fittingly, this new journal’s mission is to expand the boundaries of consumer behavior and to deepen its impact. Each issue focuses on having an impact both in consumer research and beyond. In

  15. Restricted and Repetitive Behaviors in Autism Spectrum Disorders: A Review of Research in the Last Decade

    Science.gov (United States)

    Leekam, Susan R.; Prior, Margot R.; Uljarevic, Mirko

    2011-01-01

    Restricted and repetitive behaviors (RRBs) are a core feature of autism spectrum disorders. They constitute a major barrier to learning and social adaptation, but research on their definition, cause, and capacity for change has been relatively neglected. The last decade of research has brought new measurement techniques that have improved the…

  16. Research Base for Improved Classroom Learning: Brain or Behavior? Evidence Speaks Reports, Vol 1, #9

    Science.gov (United States)

    Bruer, John T.

    2015-01-01

    Implicit in recent Evidence Speaks postings is the need to develop evidence-based interventions for improving student achievement. Comparative analysis of the education research literature versus the educational neuroscience literature suggests that education research, grounded in the behavioral and cognitive sciences, is currently the better…

  17. Efficacy and effectiveness of online cognitive behavioral treatment : a decade of interapy research

    NARCIS (Netherlands)

    Ruwaard, Jeroen; Lange, Alfred; Schrieken, Bart; Emmelkamp, Paul

    2011-01-01

    Since 1996, researchers of the Interapy research group of the University of Amsterdam have been examining the effects of online cognitive behavioral treatment (online CBT). Over the years, the group conducted nine controlled trials of online CBT for a variety of mental health disorders, among a

  18. Counseling and the Bystander-Equity Model of Supervisory Helping Behavior: Directions for EAP Research.

    Science.gov (United States)

    Gerstein, Lawrence H.; Bayer, Gregory A.

    1991-01-01

    Discusses contribution of Bystander-Equity Model of Supervisory Helping Behavior to pursuit of employee assistance program (EAP) research based on traditions of field of counseling. Offers structure for pursuing empirical and applied activities in EAP settings. Encourages counseling researchers and practitioners to respond to challenge of working…

  19. Genetic Influences on Adolescent Sexual Behavior: Why Genes Matter for Environmentally-Oriented Researchers

    Science.gov (United States)

    Harden, K. Paige

    2013-01-01

    There are dramatic individual differences among adolescents in how and when they become sexually active adults, and “early” sexual activity is frequently cited as a cause of concern for scientists, policymakers, and the general public. Understanding the causes and developmental impact of adolescent sexual activity can be furthered by considering genes as a source of individual differences. Quantitative behavioral genetics (i.e., twin and family studies) and candidate gene association studies now provide clear evidence for the genetic underpinnings of individual differences in adolescent sexual behavior and related phenotypes. Genetic influences on sexual behavior may operate through a variety of direct and indirect mechanisms, including pubertal development, testosterone levels, and dopaminergic systems. Genetic differences may be systematically associated with exposure to environments that are commonly treated as causes of sexual behavior (gene-environment correlation). Possible gene-environment correlations pose a serious challenge for interpreting the results of much behavioral research. Multivariate, genetically-informed research on adolescent sexual behavior compares twins and family members as a form of “quasi-experiment”: How do twins who differ in their sexual experiences differ in their later development? The small but growing body of genetically-informed research has already challenged dominant assumptions regarding the etiology and sequelae of adolescent sexual behavior, with some studies indicating possible positive effects of teenage sexuality. Studies of gene × environment interaction may further elucidate the mechanisms by which genes and environments combine to shape the development of sexual behavior and its psychosocial consequences. Overall, the existence of heritable variation in adolescent sexual behavior has profound implications for environmentally-oriented theory and research. PMID:23855958

  20. A cloud computing based platform for sleep behavior and chronic diseases collaborative research.

    Science.gov (United States)

    Kuo, Mu-Hsing; Borycki, Elizabeth; Kushniruk, Andre; Huang, Yueh-Min; Hung, Shu-Hui

    2014-01-01

    The objective of this study is to propose a Cloud Computing based platform for sleep behavior and chronic disease collaborative research. The platform consists of two main components: (1) a sensing bed sheet with textile sensors to automatically record patient's sleep behaviors and vital signs, and (2) a service-oriented cloud computing architecture (SOCCA) that provides a data repository and allows for sharing and analysis of collected data. Also, we describe our systematic approach to implementing the SOCCA. We believe that the new cloud-based platform can provide nurse and other health professional researchers located in differing geographic locations with a cost effective, flexible, secure and privacy-preserved research environment.

  1. Less is often more, but not always: additional evidence that familiarity breeds contempt and a call for future research.

    Science.gov (United States)

    Norton, Michael I; Frost, Jeana H; Ariely, Dan

    2013-12-01

    Ullrich, Krueger, Brod, and Groschupf (2013)-using a replication of the trait paradigm from Norton, Frost, and Ariely (2007)-suggest that less information does not always equal greater liking. We first ground the current debate in a larger historical debate in social psychology regarding the merits of configural versus algebraic models of person perception. We next review (a) related research that has suggested that more information can in some cases lead to more liking and (b) a large body of "real world" data-from friendships, daters, married couples, employment, celebrities, and politics-that suggests that more information often leads to less liking. We then provide an additional replication of our "less is more" effect, using a slight variation of the trait-list paradigm. The existing data suggest a need for further integrative explorations of when familiarity leads to contempt or liking or has no effect. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  2. African Americans, democracy, and biomedical and behavioral research: contradictions or consensus in community-based participatory research?

    Science.gov (United States)

    Spigner, C

    Individualism, in both its political and attitudinal senses, reinforces societal and institutional racism in the United States. Because of individualism's dominant focus on self-interest and self-reliance, any application of "participatory democracy" in community-based biomedical and behavioral research is fraught with dilemmas similar to those that Gunnar Myrdal observed between American racism and democracy. The research establishment is overwhelmed by well-meaning non-minorities who recognize racism and its consequences in health, but only greater representation of people-of-color in the health establishment can ameliorate the inherent contradictions of "participatory democracy" which is so fundamental to the process of community-based participatory research.

  3. Quantifying Equid Behavior - A Research Ethogram for Free-Roaming Feral Horses

    Science.gov (United States)

    Ransom, Jason I.; Cade, Brian S.

    2009-01-01

    Feral horses (Equus caballus) are globally distributed in free-roaming populations on all continents except Antarctica and occupy a wide range of habitats including forest, grassland, desert, and montane environments. The largest populations occur in Australia and North America and have been the subject of scientific study for decades, yet guidelines and ethograms for feral horse behavioral research are largely absent in the scientific literature. The U.S. Geological Survey (USGS) Fort Collins Science Center conducted research on the influences of the immunocontraceptive porcine zona pellucida (PZP) on feral horse behavior from 2003-2006 in three discrete populations in the American west. These populations were the Little Book Cliffs Wild Horse Range in Colorado, McCullough Peaks Herd Management Area in Wyoming, and Pryor Mountain Wild Horse Range in Montana; the research effort included over 1,800 hours of behavioral observations of 317 adult free-roaming feral horses. An ethogram was developed during the course of this study to facilitate accurate scientific data collection on feral horse behavior, which is often challenging to quantify. By developing this set of discrete behavioral definitions and a set of strict research protocols, scientists were better able to address both applied questions, such as behavioral changes related to fertility control, and theoretical questions, such as understanding networks and dominance hierarchies within social groups of equids.

  4. The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions

    International Nuclear Information System (INIS)

    Hernandez-Sandoval, J.; Garza-Elizondo, G.H.; Samuel, A.M.; Valtiierra, S.; Samuel, F.H.

    2014-01-01

    Highlights: • Characterization on the precipitation of Ni- and Zr-based intermetallics. • High temperature tensile properties of 354 alloy containing Zr and Ni below 0.5%. • Quality index charts as a function of heat treatment. • Yield strength and ductility color contours as a function of aging temperature and aging time. - Abstract: The principal aim of the present work was to investigate the effects of minor additions of nickel and zirconium on the strength of cast aluminum alloy 354 at ambient and high temperatures. Tensile properties of the as-cast and heat-treated alloys were determined at room temperature and at high temperatures (190 °C, 250 °C, 350 °C). The results show that Zr reacts only with Ti, Si and Al. From the quality index charts constructed for these alloys, the quality index attains minimum and maximum values of 259 MPa and 459 MPa, in the as-cast and solution-treated conditions; also, maximum and minimum values of yield strength are observed at 345 MPa and 80 MPa, respectively, within the series of aging treatments applied. A decrease in tensile properties of ∼10% with the addition of 0.4 wt.% nickel is attributed to a nickel–copper reaction. The reduction in mechanical properties due to addition of different elements is attributed principally to the increase in the percentage of intermetallic phase particles formed during solidification; such particles act as stress concentrators, decreasing the alloy ductility. Tensile test results at ambient temperatures show a slight increase (∼10%) in alloys with Zr and Zr/Ni additions, particularly at aging temperatures above 240 °C. Additions of Zr and Zr + Ni increase the high temperature tensile properties, in particular for the alloy containing 0.2 wt.% Zr + 0.2 wt.% Ni, which exhibits an increase of more than 30% in the tensile properties at 300 °C compared with the base 354 alloy

  5. An Investigation of the Microstructure and Fatigue Behavior of Additively Manufactured AISI 316L Stainless Steel with Regard to the Influence of Heat Treatment

    Directory of Open Access Journals (Sweden)

    Bastian Blinn

    2018-03-01

    Full Text Available To exploit the whole potential of Additive Manufacturing, it is essential to investigate the complex relationships between Additive Manufacturing processes, the resulting microstructure, and mechanical properties of the materials and components. In the present work, Selective Laser Melted (SLM (process category: powder bed fusion, Laser Deposition Welded (LDW (process category: direct energy deposition and, for comparison, Continuous Casted and then hot and cold drawn (CC austenitic stainless steel AISI 316L blanks were investigated with regard to their microstructure and mechanical properties. To exclude the influence of surface topography and focus the investigation on the volume microstructure, the blanks were turned into final geometry of specimens. The additively manufactured (AM- blanks were manufactured in both the horizontal and vertical building directions. In the horizontally built specimens, the layer planes are perpendicular and in vertical building direction, they are parallel to the load axis of the specimens. The materials from different manufacturing processes exhibit different chemical composition and hence, austenite stability. Additionally, all types of blanks were heat treated (2 h, 1070 °C, H2O and the influence of the heat treatment on the properties of differently manufactured materials were investigated. From the cyclic deformation curves obtained in the load increase tests, the anisotropic fatigue behavior of the AM-specimens could be detected with only one specimen in each building direction for the different Additive Manufacturing processes, which could be confirmed by constant amplitude tests. The results showed higher fatigue strength for horizontally built specimens compared to the vertical building direction. Furthermore, the constant amplitude tests show that the austenite stability influences the fatigue behavior of differently manufactured 316L. Using load increase tests as an efficient rating method of the

  6. Tensile Fracture Behavior and Failure Mechanism of Additively-Manufactured AISI 4140 Low Alloy Steel by Laser Engineered Net Shaping

    Directory of Open Access Journals (Sweden)

    Hoyeol Kim

    2017-11-01

    Full Text Available AISI 4140 powder was directly deposited on AISI 4140 wrought substrate using laser engineered net shaping (LENS to investigate the compatibility of a LENS-deposited part with the substrate. Tensile testing at room temperature was performed to evaluate the interface bond performance and fracture behavior of the test specimens. All the samples failed within the as-deposited zone, indicating that the interfacial bond is stronger than the interlayer bond inside the deposit. The fracture surfaces were analyzed using scanning electron microscopy (SEM and energy disperse X-ray spectrometry (EDS. Results show that the tensile fracture failure of the as-deposited part is primarily affected by lack-of-fusion defects, carbide precipitation, and oxide particles inclusions, which causes premature failure of the deposit by deteriorating the mechanical properties and structural integrity.

  7. Effect of the additives on clouding behavior and thermodynamics of coenzyme Q10-Kolliphor HS15 micelle aqueous solutions

    Science.gov (United States)

    Hu, Li; Zhang, Jing; Zhu, Chao; Pan, Hong-chun; Liu, Hong

    2017-11-01

    Herein we investigate the effect of different additives (electrolytes, amino acids, PEG, and sugars) on the cloud points (CP) of coenzyme Q10 (CoQ10) - Kolliphor HS15 (HS15) micelle aqueous solutions. The CP values were decreased with the increase of electrolytes and sugars, following: CPAl3+ reduced the CP. A depression of CP for CoQ10-HS15 micelle solution with PEG was molecular weight of PEG dependent. The significant thermodynamic parameters were also evaluated and discussed.

  8. Microstructure and fatigue behaviors of a biomedical Ti–Nb–Ta–Zr alloy with trace CeO2 additions

    International Nuclear Information System (INIS)

    Song, Xiu; Wang, Lei; Niinomi, Mitsuo; Nakai, Masaaki; Liu, Yang; Zhu, Miaoyong

    2014-01-01

    The new β-type Ti–29Nb–13Ta–4.6Zr (TNTZ) alloy containing trace amounts of CeO 2 additions has been designed as a biomedical implant with improved fatigue properties achieved by keeping Young's modulus to a low value. The results show that the microstructure is refined by the addition of CeO 2 ; the β grain size becomes a little larger when Ce content increases from 0.05% to 0.10%. This occurs because dispersed CeO 2 particles can act as nucleation sites for β grains; thus, the effect of rare earth oxides on microstructure refinement mainly depends on the size and dispersion of the rare earth oxides. Young's moduli of TNTZ with CeO 2 additions are maintained as low as those of TNTZ without CeO 2 , while the fatigue limit is highly improved. The 0.10% Ce alloy exhibits the best fatigue strength among the experimental alloys; its fatigue strength is increased by 66.7% compared to that of pure TNTZ. The mechanism by which rare earth oxides affect fatigue performance is dominated by dispersion strengthening. The stiff rare earth oxides can hinder the movement of dislocations, resulting in resistance to the formation of fatigue cracks. Rare earth oxides also change the crack propagation direction and the crack propagation route, effectively decreasing the crack propagation rate

  9. The ENDORSE study: Research into environmental determinants of obesity related behaviors in Rotterdam schoolchildren

    Directory of Open Access Journals (Sweden)

    Looij-Jansen Petra

    2008-04-01

    Full Text Available Abstract Background Children and adolescents are important target groups for prevention of overweight and obesity as overweight is often developed early in life and tracks into adulthood. Research into behaviors related to overweight (energy balance-related behaviors and the personal and environmental determinants of these behaviors is fundamental to inform prevention interventions. In the Netherlands and in other countries systematic research into environmental determinants of energy balance related behaviors in younger adolescents is largely lacking. This protocol paper describes the design, the components and the methods of the ENDORSE study (Environmental Determinants of Obesity in Rotterdam SchoolchildrEn, that aims to identify important individual and environmental determinants of behaviors related to overweight and obesity and the interactions between these determinants among adolescents. Methods The ENDORSE study is a longitudinal study with a two-year follow-up of a cohort of adolescents aged 12–15 years. Data will be collected at baseline (2005/2006 and at two years follow-up (2007/2008. Outcome measures are body mass index (BMI, waist circumference, time spent in physical activity and sedentary behaviors, and soft drink, snack and breakfast consumption. The ENDORSE study consists of two phases, first employing qualitative research methods to inform the development of a theoretical framework to examine important energy balance related behaviors and their determinants, and to inform questionnaire development. Subsequently, the hypothetical relationships between behavioral determinants, energy balance related behaviors and BMI will be tested in a quantitative study combining school-based surveys and measurements of anthropometrical characteristics at baseline and two-year follow-up. Discussion The ENDORSE project is a comprehensive longitudinal study that enables investigation of specific environmental and individual determinants of

  10. Commentary on: Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research

    OpenAIRE

    De Timary, Philippe; Philippot, Pierre

    2015-01-01

    Background: This paper is a commentary to the article entitled: "Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research", by Billieux, Schimmenti, Khazaal, Maurage and Heeren (2015). Methods and Aims: In this manuscript, we commented on two aspects developed by the authors. Billieux et al. (2015) propose that the recent development of propositions of behavioral addiction is driven by an unwise application of an addiction model to excessive behavi...

  11. Glass additive influence on the sintering behavior, microstructure and microwave magnetic properties of Cu-Bi-Zn co-doped Co2Z ferrites

    International Nuclear Information System (INIS)

    Hsiang, Hsing-I; Mei, Li-Then; Hsi, Chi-Shiung; Wu, Wei-Cheng; Cheng, Li-Bao; Yen, Fu-Su

    2011-01-01

    The Bi 2 O 3 -B 2 O 3 -ZnO-SiO 2 (BB35SZ) glass effects on the sintering behavior and microwave magnetic properties of Cu-Bi-Zn co-doped Co 2 Z ferrites were investigated to develop low-temperature-fired ferrites. The glass wetting characteristics on the Co 2 Z ferrite surface, X-ray diffractometer, scanning electron microscopy and a dilatometer were used to examine the BB35SZ glass effect on Co 2 Z ferrite densification and the chemical reaction between the glass and Co 2 Z ferrites. The results indicate that BB35SZ glass can be used as a sintering aid to reduce the densification temperature of Co 2 Z ferrites from 1300 to 900 o C. 3(Ba 0.9 Bi 0.1 O).2(Co 0.8 Cu 0.2 O).12(Fe 1.975 Zn 0.025 O 3 ) ferrite with 2 wt% BB35SZ glass can be densified below 900 o C, exhibiting an initial permeability of 3.4. This process provides a promising candidate for multilayer chip magnetic devices for microwave applications. - Research highlights: → Bi 2 O 3 -B 2 O 3 -ZnO-SiO 2 glass can effectively wet Co 2 Z ferrites and promote Co 2 Z ferrite densification. → The excess substitution of Bi and Zn (x=0.2) and glass addition enhanced Z phase decomposition into U, W and spinel phases, which resulted in magnetic property degradation. → 3(Ba 0.9 Bi 0.1 O).2(Co 0.8 Cu 0.2 O).12(Fe 1.975 Zn 0.025 O 3 ) ferrite with 2 wt% glass can be densified at below 900 o C and exhibits an initial permeability of 3.4, which provides a promising candidate for multilayer chip magnetic devices for microwave applications.

  12. The Addition of Spiritual Dimension on Customer Value to Investigate the Relationship of Customer Value, Customer Satisfaction and Behavior Intention on Islamic Banks Saving Products in Indonesia

    Directory of Open Access Journals (Sweden)

    Adi Zakaria Afiff

    2009-06-01

    Full Text Available This study propose the addition of a spiritual dimension in the formation of customer value, in addition to the functional, social and emotional dimension of customer value that has already been empirically tested in previous studies, among customers who own saving products at Islamic banks in Indonesia. The study also investigate the relationship between customer value and customer satisfaction, and the relationship between customer satisfaction and customer behavioral intentions among these Islamic banks customers. The results show that spiritual dimension is significantly related to the customer value together with all three other dimensions (functional, social and emotional of customer value. All dimensions have significant relationship with customer value. Finally the results also show that customer value positively influence customer satisfaction, and customer satisfaction positively influence customer behavior intentions.

  13. Making the case for change: What researchers need to consider when designing behavior change interventions aimed at improving medication dispensing.

    Science.gov (United States)

    Cadogan, Cathal A; Ryan, Cristín; Hughes, Carmel

    2016-01-01

    There is a growing emphasis on behavior change in intervention development programmes aimed at improving public health and healthcare professionals' practice. A number of frameworks and methodological tools have been established to assist researchers in developing interventions seeking to change healthcare professionals' behaviors. The key features of behavior change intervention design involve specifying the target group (i.e. healthcare professional or patient cohort), the target behavior and identifying mediators (i.e. barriers and facilitators) of behavior change. Once the target behavior is clearly specified and understood, specific behavior change techniques can then be used as the basis of the intervention to target identified mediators of behavior change. This commentary outlines the challenges for pharmacy practice-based researchers in targeting dispensing as a behavior when developing behavior change interventions aimed at pharmacists and proposes a definition of dispensing to consider in future research. Copyright © 2016 Elsevier Inc. All rights reserved.

  14. Commentary on: Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research

    Science.gov (United States)

    Kardefelt-Winther, Daniel

    2015-01-01

    Background and Aims This commentary is written in response to a paper by Billieux, Schimmenti, Khazaal, Maurage and Hereen (2015) published in the Journal of Behavioral Addictions. Methods It supports and extends the arguments by Billieux, Schimmenti et al. (2015): that the study of behavioral addictions too often rests on atheoretical and confirmatory research approaches. This tends to lead to theories that lack specificity and a neglect of the underlying processes that might explain why repetitive problem behaviors occur. Results In this commentary I extend the arguments by Billieux, Schimmenti et al. (2015) and argue that such research approaches might take us further away from conceptualizing psychiatric diagnoses that can be properly validated, which is already a problem in the field. Furthermore, I discuss whether the empirical support for conceptualizing repetitive problem behaviors as addictions might rest on research practices that have been methodologically biased to produce a result congruent with the proposal that substance addictions and behavioral addictions share similar traits. Conclusions I conclude by presenting a number of ways of going forward, chief of which is the proposal that we might wish to go beyond a priori assumptions of addiction in favor of identifying the essential problem manifestations for each new potential behavioral addiction. PMID:26551896

  15. Comparative study of the influence of antimony oxide additives (III) and nickel hydroxide (II) on electrochemical behavior of cadmium electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Kadnikova, N.V.; Lvova, L.A.; Ryabskaya, I.A.

    1983-01-01

    Comparative study of the influence of additives indicated that with partial or complete replacement in the active mass of the cadmium electrode of nickel hydroxide (II) by antimony oxide (III), the electrochemical characteristics do not significantly change. During prolonged storage of charged cadmium electrodes the presence of nickel hydroxide (II) and intermetal compound (IMC) of cadmium with nickel is formed and the specific surface increases. In the case of adding antimony (III) formation of noticeable quantities of IMC of cadmium with antimony is not observed. The specific surface is reduced during storage.

  16. Radiation embrittlement behavior of fine-grained molybdenum alloy with 0.2 wt%TiC addition

    Energy Technology Data Exchange (ETDEWEB)

    Kitsunai, Y. [Tohoku University (Japan); Kurishita, H. [International Research Center for Nuclear Materials Science, Institute for Materials research (IMR), Tohoku University, Oarai, Ibaraki 311-1313 (Japan)]. E-mail: kurishi@imr.tohoku.ac.jp; Kuwabara, T. [Tohoku University (Japan); Narui, M. [International Research Center for Nuclear Materials Science, Institute for Materials research (IMR), Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Hasegawa, M. [International Research Center for Nuclear Materials Science, Institute for Materials research (IMR), Tohoku University, Oarai, Ibaraki 311-1313 (Japan); Takida, T. [A.L.M.T. TECH Inc., 2 Iwasekoshi-machi, Toyama 931-8543 (Japan); Takebe, K. [A.L.M.T. TECH Inc., 2 Iwasekoshi-machi, Toyama 931-8543 (Japan)

    2005-11-15

    In order to elucidate the effects of pre-irradiation microstructures and irradiation conditions on radiation embrittlement and radiation-induced ductilization (RIDU), fine-grained Mo-0.2 wt%TiC specimens with high and low reduction rates in plastic working, which are designated as MTC-02H and MTC-02L, respectively, were prepared by powder metallurgical methods. The specimens were neutron irradiated to 0.1-0.15 dpa with controlled 1-cycle and 4-cycle heating between 573 and 773 K, and 473 and 673 K, respectively, in JMTR. Vickers microhardness and three-point bending impact tests and TEM microstructural examinations were made. The degree of radiation embrittlement, assessed by DBTT shift due to irradiation, was strongly dependent on the reduction rate and cycle number. The 4-cycle irradiation suppressed the radiation embrittlement compared with the 1-cycle irradiation, and the suppression was much more significant in MTC-02L than in MTC-02H. The observed behavior is discussed in connection with RIDU and microstructural evolution caused by the 4-cycle irradiation.

  17. Effect of aluminum addition on the optical, morphology and electrical behavior of spin coated zinc oxide thin films

    Directory of Open Access Journals (Sweden)

    Amit Kumar Srivastava

    2011-09-01

    Full Text Available Aluminum-doped ZnO thin films of high optical transmittance (∼ 84-100% and low resistivity (∼ 2.3x10-2 Ωcm have been prepared on glass substrate by the spin coating and subsequent annealing at 500°C for 1h in air or vacuum. Effect of aluminum doping and annealing environment on morphology, optical transmittance and electrical resistivity of ZnO thin films has been studied with possible application as a transparent electrode in photovoltaic. The changes occurring due to aluminum addition include reduction in grain size, root mean square roughness, peak-valley separation, and sheet resistance with improvement in the optical transmittance to 84-100% in the visible range. The origin of low electrical resistivity lies in increase in i electron concentration following aluminum doping (being trivalent, formation of oxygen vacancies due to vacuum annealing, filling of cation site with additional zinc at solution stage itself and ii carrier mobility.

  18. Looking for information a survey of research on information seeking, needs, and behavior

    CERN Document Server

    Case, Donald O

    2016-01-01

    The 4th edition of this popular and well-cited text is now co-authored, and includes significant changes from earlier texts. Presenting a comprehensive review of over a century of research on information behavior (IB), this book is intended for students in information studies and disciplines interested in research on information activities. The initial two chapters introduce IB as a multi-disciplinary topic, the 3rd provides a brief history of research on information seeking. Chapter four discusses what is meant by the terms 'information' and 'knowledge.' Chapter five discusses 'information needs,' and how they are addressed. The 6th chapter identifies many related concepts. Twelve models of information behavior (expanded from earlier editions) are illustrated in chapter seven. Chapter eight reviews various paradigms and theories informing IB research. Chapter nine examines research methods invoked in IB studies and a discussion of qualitative and mixed approaches. The 10th chapter gives examples of IB studie...

  19. Effect of small addition of aluminum on electrochemical corrosion behavior of magnesium-calcium sacrificial anode in underground environment

    International Nuclear Information System (INIS)

    Rizam, S.S.; Sasirehka, G.; Firdaus, A.M.H.; Mahdi, C.I.; Nazree, D.M.; Abdul Razak Daud; Azrem, A.A.

    2009-01-01

    The effect of small addition of Al on the electrochemical performances was investigated by open circuit potential and Tafel Extrapolation method. The results show that open circuit potential reveals as-cast Mg containing Ca alloys with minor content of Al maintained highly negative potential with the range of -1.68 to -1.63 V SCE in comparison to both pure Mg (-1.60V SCE ) and commercial high potential Mg content. Corrosion rate for the as-cast samples remains higher (30-17 mpy) than pure Mg (3 mpy) and commercial high potential Mg anode (14 mpy). The increasing small content of Al results in the reduction of corrosion rate significantly. Therefore, it proves that the performance of Mg containing Ca alloy is strongly influenced by the concentration of Al. (author)

  20. Broadening measures of success: results of a behavioral health translational research training program.

    Science.gov (United States)

    Baldwin, Julie A; Williamson, Heather J; Eaves, Emery R; Levin, Bruce L; Burton, Donna L; Massey, Oliver T

    2017-07-24

    While some research training programs have considered the importance of mentoring in inspiring professionals to engage in translational research, most evaluations emphasize outcomes specific to academic productivity as primary measures of training program success. The impact of such training or mentoring programs on stakeholders and local community organizations engaged in translational research efforts has received little attention. The purpose of this evaluation is to explore outcomes other than traditional academic productivity in a translational research graduate certificate program designed to pair graduate students and behavioral health professionals in collaborative service-learning projects. Semi-structured qualitative interviews with scholars, community mentors, and academic mentors were conducted regarding a translational research program to identify programmatic impacts. Interviews were transcribed and coded by the research team to identify salient themes related to programmatic outcomes. Results are framed using the Translational Research Impact Scale which is organized into three overarching domains of potential impact: (1) research-related impacts, (2) translational impacts, and (3) societal impacts. This evaluation demonstrates the program's impact in all three domains of the TRIS evaluation framework. Graduate certificate participants (scholars) reported that gaining experience in applied behavioral health settings added useful skills and expertise to their present careers and increased their interest in pursuing translational research. Scholars also described benefits resulting from networks gained through participation in the program, including valuable ties between the university and community behavioral health organizations. This evaluation of the outcomes of a graduate certificate program providing training in translational research highlights the need for more community-oriented and practice-based measures of success. Encouraging practitioner

  1. The down syndrome behavioral phenotype: implications for practice and research in occupational therapy.

    Science.gov (United States)

    Daunhauer, Lisa A; Fidler, Deborah J

    2011-01-01

    ABSTRACT Down syndrome (DS) is the most common chromosomal cause of intellectual disability. The genetic causes of DS are associated with characteristic outcomes, such as relative strengths in visual-spatial skills and relative challenges in motor planning. This profile of outcomes, called the DS behavioral phenotype, may be a critical tool for intervention planning and research in this population. In this article, aspects of the DS behavioral phenotype potentially relevant to occupational therapy practice are reviewed. Implications and challenges for etiology-informed research and practice are discussed.

  2. Common method biases in behavioral research: a critical review of the literature and recommended remedies.

    Science.gov (United States)

    Podsakoff, Philip M; MacKenzie, Scott B; Lee, Jeong-Yeon; Podsakoff, Nathan P

    2003-10-01

    Interest in the problem of method biases has a long history in the behavioral sciences. Despite this, a comprehensive summary of the potential sources of method biases and how to control for them does not exist. Therefore, the purpose of this article is to examine the extent to which method biases influence behavioral research results, identify potential sources of method biases, discuss the cognitive processes through which method biases influence responses to measures, evaluate the many different procedural and statistical techniques that can be used to control method biases, and provide recommendations for how to select appropriate procedural and statistical remedies for different types of research settings.

  3. Meta-Analysis of Behavioral Self-Management Interventions in Single-Case Research

    Science.gov (United States)

    Briesch, Amy M.; Briesch, Jacquelyn M.

    2016-01-01

    The current study meta-analyzed 47 single-subject studies of behavioral self-management interventions that were published between 1971 and 2011. In addition to obtaining an overall measure of effect across all self-management studies (f = 0.93), analyses were conducted to assess whether treatment effectiveness was moderated by factors such as…

  4. Research

    African Journals Online (AJOL)

    ebutamanya

    2015-03-02

    Mar 2, 2015 ... Joseph Daniels1,&, Ruth Nduati1,2, James Kiarie1,3, Carey Farquhar1,4,5 .... or basic science research career (Socio-Behavioral Research, .... a research environment that supports knowledge sharing to develop research ...

  5. Are researcher development interventions, alone or in any combination, effective in improving researcher behavior? A systematic review.

    Science.gov (United States)

    Mazmanian, Paul E; Coe, Antoinette B; Evans, Jessica A; Longo, Daniel R; Wright, Barbara A

    2014-03-01

    Academic institutions funded by the Clinical and Translational Science Awards (CTSA) Program of the National Institutes of Health were challenged recently by the Institute of Medicine to expand traditional mentoring of graduate and postdoctoral scholars to include training and continuing education for faculty, professional staff, and community partners. A systematic review was conducted to determine whether researcher development interventions, alone or in any combination, are effective in improving researcher behavior. PubMed, CINAHL, and Education Research Complete databases and select journals were searched for relevant articles published from January 2000 through October 2012. A total of 3,459 papers were identified, and 114 papers were retrieved for in-depth analysis. None included randomization. Twenty-two papers reported subjects with professional degrees, interventions, and outcomes. Interventions were meetings, outreach visits, colleague mediation, audit and feedback, and multifaceted interventions. Most studies reported multifaceted interventions (68.2%), often involving mentored learning experiences, and meetings. All studies reported a change in performance, including numbers of publications or grant applications. Nine studies reported changes in competence, including writing, presentation, or analytic skills, and performance in research practice (40.9%). Even as, the quality of evidence was weak to establish causal linkages between researcher development and improved researcher behavior, nearly all the projects (81.8%) received funding from governmental agencies, professional societies, or other organizations. Those who design researcher development activities and those who evaluate the programs are challenged to develop tools and conduct studies that measure the effectiveness, costs, and sustainability of researcher development in the CTSA Program.

  6. Superplasticity behaviors of Al-Zn-Mg-Zr cold-rolled alloy sheet with minor Sc addition

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, H. [School of Materials Science and Engineering, Central South University (Light Alloy Research Institute, Central South University), Changsha 410083 (China); Nonferrous Metal Oriented Advanced Structural Materials and Manufacturing Cooperative Innovation Center, Changsha 410083 (China); Pan, Q.L., E-mail: pql2016@126.com [School of Materials Science and Engineering, Central South University (Light Alloy Research Institute, Central South University), Changsha 410083 (China); Nonferrous Metal Oriented Advanced Structural Materials and Manufacturing Cooperative Innovation Center, Changsha 410083 (China); Yu, X.H.; Huang, X.; Sun, X.; Wang, X.D.; Li, M.J.; Yin, Z.M. [School of Materials Science and Engineering, Central South University (Light Alloy Research Institute, Central South University), Changsha 410083 (China); Nonferrous Metal Oriented Advanced Structural Materials and Manufacturing Cooperative Innovation Center, Changsha 410083 (China)

    2016-10-31

    A refined microstructure of Al-Zn-Mg-Sc-Zr alloy sheet was produced by simple hot and cold rolling to an average grain size of 3 µm. Experiments were completed in electro-fluid servo-fatigue tester and results were investigated by means of optical microscope (OM), scanning electron microscopy (SEM) and transmission electron microscope (TEM). Superplastic deformation was conducted and superplastic ductility of ≥200% was achieved at a testing temperature range from 425 ºC to 500 ºC and relative high strain rate range of 1×10{sup −3} s{sup −1}~1×10{sup −1} s{sup −1}. The maximum elongation of 539% was obtained at 500 ºC and 1×10{sup −2} s{sup −1}. In addition, the scanning electron microscopy (SEM) and transmission electron microscope (TEM) analyses showed that the presence of Al{sub 3} (Sc, Zr) particles in pinning grain boundaries and dislocations had a great influence on the superplastic deformation. The analyses of superplastic test data calculated out the coherent strain rates sensitivity parameter of 0.43 and the average activation energy of 143.762 kJ/mol. The data interpreted that the dominant deformation mechanism was grain boundary sliding controlled by lattice self-diffusion.

  7. Microstructure characterization and mechanical behavior of laser additive manufactured ultrahigh-strength AerMet100 steel

    International Nuclear Information System (INIS)

    Ran, Xianzhe; Liu, Dong; Li, An; Wang, Huaming; Tang, Haibo; Cheng, Xu

    2016-01-01

    Ultrahigh-strength AerMet100 steel thick plate was fabricated by laser additive manufacturing process. The as-deposited microstructures of the test steel were characterized using optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The mechanical properties were then examined using vickers-hardness test and tensile test. Results indicate that the as-deposited microstructures of the steel mainly consist of grain boundary allotriomorphic ferrite (GBA), grain interior irregular proeutectoid ferrite, plate-like upper bainite, needle-like lower bainite and retained austenite, which result in a good strength and some ductility anisotropy. The low deformation compatibility of specimen at the transverse direction (perpendicular to the deposition direction) mainly ascribes to the poor cracking resistance of the prior-austenite columnar grain boundary with coarse GBA phases. Compared to the almost intergranular cracking taken place in the transverse tensile specimen, the fracture mode of the longitudinal tensile specimen is a mixed mode of the predominant transgranular cracking and minor intergranular cracking.

  8. Microstructure characterization and mechanical behavior of laser additive manufactured ultrahigh-strength AerMet100 steel

    Energy Technology Data Exchange (ETDEWEB)

    Ran, Xianzhe [National Engineering Laboratory of Additive Manufacturing for Large Metallic Components, 37 Xueyuan Road, Beijing 100191 (China); School of Materials Science and Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191 (China); Liu, Dong [National Engineering Laboratory of Additive Manufacturing for Large Metallic Components, 37 Xueyuan Road, Beijing 100191 (China); Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Component, 37 Xueyuan Road, Beijing 100191 (China); School of Materials Science and Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191 (China); Li, An, E-mail: li_an@buaa.edu.cn [National Engineering Laboratory of Additive Manufacturing for Large Metallic Components, 37 Xueyuan Road, Beijing 100191 (China); Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Component, 37 Xueyuan Road, Beijing 100191 (China); School of Materials Science and Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191 (China); Wang, Huaming; Tang, Haibo [National Engineering Laboratory of Additive Manufacturing for Large Metallic Components, 37 Xueyuan Road, Beijing 100191 (China); Engineering Research Center of Ministry of Education on Laser Direct Manufacturing for Large Metallic Component, 37 Xueyuan Road, Beijing 100191 (China); School of Materials Science and Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191 (China); Cheng, Xu [School of Materials Science and Engineering, Beihang University, 37 Xueyuan Road, Beijing 100191 (China)

    2016-04-29

    Ultrahigh-strength AerMet100 steel thick plate was fabricated by laser additive manufacturing process. The as-deposited microstructures of the test steel were characterized using optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The mechanical properties were then examined using vickers-hardness test and tensile test. Results indicate that the as-deposited microstructures of the steel mainly consist of grain boundary allotriomorphic ferrite (GBA), grain interior irregular proeutectoid ferrite, plate-like upper bainite, needle-like lower bainite and retained austenite, which result in a good strength and some ductility anisotropy. The low deformation compatibility of specimen at the transverse direction (perpendicular to the deposition direction) mainly ascribes to the poor cracking resistance of the prior-austenite columnar grain boundary with coarse GBA phases. Compared to the almost intergranular cracking taken place in the transverse tensile specimen, the fracture mode of the longitudinal tensile specimen is a mixed mode of the predominant transgranular cracking and minor intergranular cracking.

  9. Ethical issues associated with the use of animal experimentation in behavioral neuroscience research.

    Science.gov (United States)

    Ohl, Frauke; Meijboom, Franck

    2015-01-01

    This chapter briefly explores whether there are distinct characteristics in the field of Behavioral Neuroscience that demand specific ethical reflection. We argue that although the ethical issues in animal-based Behavioral Neuroscience are not necessarily distinct from those in other research disciplines using animal experimentation, this field of endeavor makes a number of specific, ethically relevant, questions more explicit and, as a result, may expose to discussion a series of ethical issues that have relevance beyond this field of science. We suggest that innovative research, by its very definition, demands out-of-the-box thinking. At the same time, standardization of animal models and test procedures for the sake of comparability across experiments inhibits the potential and willingness to leave well-established tracks of thinking, and leaves us wondering how open minded research is and whether it is the researcher's established perspective that drives the research rather than the research that drives the researcher's perspective. The chapter finishes by introducing subsequent chapters of this book volume on Ethical Issues in Behavioral Neuroscience.

  10. A Targeted Review of the Neurobiology and Genetics of Behavioral Addictions: An Emerging Area of Research

    Science.gov (United States)

    Leeman, Robert F.; Potenza, Marc N.

    2013-01-01

    This review summarizes neurobiological and genetic findings in behavioral addictions, draws parallels with findings pertaining to substance use disorders and offers suggestions for future research. Articles concerning brain function, neurotransmitter activity and family history/genetics findings for behavioral addictions involving gambling, internet use, video game playing, shopping, kleptomania and sexual activity were reviewed. Behavioral addictions involve dysfunction in several brain regions, particularly the frontal cortex and striatum. Findings from imaging studies incorporating cognitive tasks have arguably been more consistent than cue-induction studies. Early results suggest white and gray matter differences. Neurochemical findings suggest roles for dopaminergic and serotonergic systems, but results from clinical trials seem more equivocal. While limited, family history/genetic data support heritability for pathological gambling and that those with behavioral addictions are more likely to have a close family member with some form of psychopathology. Parallels exist between neurobiological and genetic/family history findings in substance and non-substance addictions, suggesting that compulsive engagement in these behaviors may constitute addictions. Findings to date are limited, particularly for shopping, kleptomania and sexual behavior. Genetic understandings are at an early stage. Future research directions are offered. PMID:23756286

  11. A tracking system for laboratory mice to support medical researchers in behavioral analysis.

    Science.gov (United States)

    Macrì, S; Mainetti, L; Patrono, L; Pieretti, S; Secco, A; Sergi, I

    2015-08-01

    The behavioral analysis of laboratory mice plays a key role in several medical and scientific research areas, such as biology, toxicology, pharmacology, and so on. Important information on mice behavior and their reaction to a particular stimulus is deduced from a careful analysis of their movements. Moreover, behavioral analysis of genetically modified mice allows obtaining important information about particular genes, phenotypes or drug effects. The techniques commonly adopted to support such analysis have many limitations, which make the related systems particularly ineffective. Currently, the engineering community is working to explore innovative identification and sensing technologies to develop new tracking systems able to guarantee benefits to animals' behavior analysis. This work presents a tracking solution based on passive Radio Frequency Identification Technology (RFID) in Ultra High Frequency (UHF) band. Much emphasis is given to the software component of the system, based on a Web-oriented solution, able to process the raw tracking data coming from a hardware system, and offer 2D and 3D tracking information as well as reports and dashboards about mice behavior. The system has been widely tested using laboratory mice and compared with an automated video-tracking software (i.e., EthoVision). The obtained results have demonstrated the effectiveness and reliability of the proposed solution, which is able to correctly detect the events occurring in the animals' cage, and to offer a complete and user-friendly tool to support researchers in behavioral analysis of laboratory mice.

  12. Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions.

    Science.gov (United States)

    Wieding, Jan; Fritsche, Andreas; Heinl, Peter; Körner, Carolin; Cornelsen, Matthias; Seitz, Hermann; Mittelmeier, Wolfram; Bader, Rainer

    2013-12-16

    The repair of large segmental bone defects caused by fracture, tumor or infection remains challenging in orthopedic surgery. The capability of two different bone scaffold materials, sintered tricalciumphosphate and a titanium alloy (Ti6Al4V), were determined by mechanical and biomechanical testing. All scaffolds were fabricated by means of additive manufacturing techniques with identical design and controlled pore geometry. Small-sized sintered TCP scaffolds (10 mm diameter, 21 mm length) were fabricated as dense and open-porous samples and tested in an axial loading procedure. Material properties for titanium alloy were determined by using both tensile (dense) and compressive test samples (open-porous). Furthermore, large-sized open-porous TCP and titanium alloy scaffolds (30 mm in height and diameter, 700 µm pore size) were tested in a biomechanical setup simulating a large segmental bone defect using a composite femur stabilized with an osteosynthesis plate. Static physiologic loads (1.9 kN) were applied within these tests. Ultimate compressive strength of the TCP samples was 11.2 ± 0.7 MPa and 2.2 ± 0.3 MPa, respectively, for the dense and the open-porous samples. Tensile strength and ultimate compressive strength was 909.8 ± 4.9 MPa and 183.3 ± 3.7 MPa, respectively, for the dense and the open-porous titanium alloy samples. Furthermore, the biomechanical results showed good mechanical stability for the titanium alloy scaffolds. TCP scaffolds failed at 30% of the maximum load. Based on recent data, the 3D printed TCP scaffolds tested cannot currently be recommended for high load-bearing situations. Scaffolds made of titanium could be optimized by adapting the biomechanical requirements.

  13. The effect of Sn addition on aging behavior and mechanical properties of wrought AZ80 magnesium alloy

    International Nuclear Information System (INIS)

    Jiang, Luyao; Zhang, Dingfei; Fan, Xiaowei; Guo, Fei; Hu, Guangshan; Xue, Hansong; Pan, Fusheng

    2015-01-01

    Highlights: • Thermodynamic and precipitation kinetics calculation was used to analyze aging hardening after addition of Sn. • Precipitation sequences were determined by the content of Sn element. • The microstructure of Mg 17 Al 12 discontinuous precipitates were influenced by Mg 2 Sn precipitates. - Abstract: The microstructure and mechanical properties of AZ80 wrought magnesium alloys with varying Sn contents (0, 1, 2 and 4 wt.%) have been studied by thermodynamic and precipitation kinetics calculation and examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), hardness test and uniaxial tensile test at room temperature in this paper. The results of thermodynamic and precipitation kinetics calculation showed that the precipitation sequences were determined by the content of Sn element. It was found that in the aging treatment of this work, Mg 17 Al 12 phase precipitated sooner than Mg 2 Sn phase in the alloys with less than 1.72 wt.% Sn and there was a contrary precipitation sequence of these two phases in the alloys with more than 1.72 wt.% Sn. Experimental results were in agreement with those of calculation. According to SEM and TEM observation, Sn promoted precipitation of Mg 17 Al 12 on aging temperature, however the preferential Mg 2 Sn phase suppressed discontinuous Mg 17 Al 12 precipitates by hindering the growth of these in their growth direction. AZ80 with 1–2 wt.% Sn as-aged alloys exhibited outstanding mechanical property that UTS, YS and EL were ∼420 MPa, ∼290 MPa and ∼5%, respectively

  14. Immersive Virtual Environment Technology to Supplement Environmental Perception, Preference and Behavior Research: A Review with Applications.

    Science.gov (United States)

    Smith, Jordan W

    2015-09-11

    Immersive virtual environment (IVE) technology offers a wide range of potential benefits to research focused on understanding how individuals perceive and respond to built and natural environments. In an effort to broaden awareness and use of IVE technology in perception, preference and behavior research, this review paper describes how IVE technology can be used to complement more traditional methods commonly applied in public health research. The paper also describes a relatively simple workflow for creating and displaying 360° virtual environments of built and natural settings and presents two freely-available and customizable applications that scientists from a variety of disciplines, including public health, can use to advance their research into human preferences, perceptions and behaviors related to built and natural settings.

  15. Translational research in behavior analysis: historical traditions and imperative for the future.

    Science.gov (United States)

    Mace, F Charles; Critchfield, Thomas S

    2010-05-01

    "Pure basic" science can become detached from the natural world that it is supposed to explain. "Pure applied" work can become detached from fundamental processes that shape the world it is supposed to improve. Neither demands the intellectual support of a broad scholarly community or the material support of society. Translational research can do better by seeking innovation in theory or practice through the synthesis of basic and applied questions, literatures, and methods. Although translational thinking has always occurred in behavior analysis, progress often has been constrained by a functional separation of basic and applied communities. A review of translational traditions in behavior analysis suggests that innovation is most likely when individuals with basic and applied expertise collaborate. Such innovation may have to accelerate for behavior analysis to be taken seriously as a general-purpose science of behavior. We discuss the need for better coordination between the basic and applied sectors, and argue that such coordination compromises neither while benefiting both.

  16. Structured evaluation of rodent behavioral tests used in drug discovery research

    Directory of Open Access Journals (Sweden)

    Anders eHånell

    2014-07-01

    Full Text Available A large variety of rodent behavioral tests are currently being used to evaluate traits such as sensory-motor function, social interactions, anxiety-like and depressive-like behavior, substance dependence and various forms of cognitive function. Most behavioral tests have an inherent complexity, and their use requires consideration of several aspects such as the source of motivation in the test, the interaction between experimenter and animal, sources of variability, the sensory modality required by the animal to solve the task as well as costs and required work effort. Of particular importance is a test’s validity because of its influence on the chance of successful translation of preclinical results to clinical settings. High validity may, however, have to be balanced against practical constraints and there are no behavioral tests with optimal characteristics. The design and development of new behavioral tests is therefore an ongoing effort and there are now well over one hundred tests described in the contemporary literature. Some of them are well established following extensive use, while others are novel and still unproven. The task of choosing a behavioral test for a particular project may therefore be daunting and the aim of the present review is to provide a structured way to evaluate rodent behavioral tests aimed at drug discovery research.

  17. Lacking quality in research: Is behavioral neuroscience affected more than other areas of biomedical science?

    Science.gov (United States)

    Bespalov, Anton; Steckler, Thomas

    2018-04-15

    There are many reasons why novel therapeutics fail in clinical trials but these failures are often attributed to lacking quality of preclinical data. These problems are not limited to any specific therapeutic area, academic or industrial research and are due in large part to several generic factors influencing research quality (e.g., related to definition of pre-specified endpoints, principles of study design and analysis, biased reporting, and lack of proper training). Yet, neuroscience drug discovery is often said to be affected more than the other fields. Within neuroscience, behavioral studies are the most blamed for being poorly designed, underpowered and mis-reported and there are indeed several factors that may be rather unique for behavioral research, such as a multitude of environmental conditions that are difficult to control and that are often not reported, ethical concerns about in vivo research and the pressure to reduce animal numbers, contributing to under-powered studies, and the complexity of study design and analysis, creating too much room for post hoc data massaging and selective reporting. Also, the blood-brain barrier as a frequently neglected complicating factor has to be considered in CNS research. The importance of these factors is increasingly recognized and urgent efforts are needed to demonstrate that behavioral methods of preclinical neuroscience research deliver results that can be as robust as with the non-behavioral methods Until this goal is achieved, behavioral neuroscience and neuroscience in general may be losing young talent, CNS drug discovery may lack the needed investment and this field may indeed be amongst the most affected by the current preclinical data quality crisis. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Research Paper: Effectiveness of Social Skills Training on Behavioral Problems in Adolescents with Intellectual Disability

    Directory of Open Access Journals (Sweden)

    Abbas Nesayan

    2016-07-01

    Conclusion This research showed that social skills training were not significantly effective on behavioral problems in adolescents with intellectual disability. Although our results were not effective, research evidence shows that people with cognitive delays (such as intellectual disability require social skill training programs that include all of their academic, career, daily life, and social skills. As social skills learning plays a role in personal and social adjustment, it is necessary to pay more attention to these skills.

  19. The Research on the Impact of Management Level's Charismatic Leadership Style on Miners' Unsafe Behavior.

    Science.gov (United States)

    Li, Hongxia; Di, Hongxi; Tian, Shuicheng; Li, Jian

    2015-01-01

    The aim of this study is research the impact of management level's charismatic leadership style on miners' unsafe behavior by using the questionnaires on charismatic leadership style, safety attitude and the miners' unsafe behavior measurement to investigate 200 employees in Shen Dong Company. The research results suggest that management level's charismatic leadership style have very important influence on miners' unsafe behavior and the influence is affected by the safety attitude which is the intermediary function. In the end, this study propose advice on how to improve the coal mine enterprise managers charismatic leadership style in the coal mine enterprise's safety management work, including attach great importance to a variety of incentive methods, set up safety moral models, practice of inductive leadership concept, create a good atmosphere of safety, etc for reference for coal mining enterprises.

  20. New Developments in Developmental Research on Social Information Processing and Antisocial Behavior

    Science.gov (United States)

    Fontaine, Reid Griffith

    2010-01-01

    The Special Section on developmental research on social information processing (SIP) and antisocial behavior is here introduced. Following a brief history of SIP theory, comments on several themes--measurement and assessment, attributional and interpretational style, response evaluation and decision, and the relation between emotion and SIP--that…

  1. QED's School Market Trends: Teacher Buying Behavior & Attitudes, 2001-2002. Research Report.

    Science.gov (United States)

    Quality Education Data, Inc., Denver, CO.

    This study examined teachers' classroom material buying behaviors and trends. Data came from Quality Education Data's National Education Database, which includes U.S. K-12 public, private, and Catholic schools and districts. Researchers surveyed K-8 teachers randomly selected from QED's National Education Database. Results show that teachers spend…

  2. Physical Activity Research in Intellectual Disability: A Scoping Review Using the Behavioral Epidemiological Framework

    Science.gov (United States)

    Pitchford, E. Andrew; Dixon-Ibarra, Alicia; Hauck, Janet L.

    2018-01-01

    Through a scoping review, the current state of physical activity research in people with intellectual disability was examined. A search of publications between 2000 and 2014 retrieved 362 articles that met inclusion criteria. Eligible studies were coded according to the Behavioral Epidemiological Framework. Of the articles identified, 48% examined…

  3. Nanotechnology and Ethics: The Role of Regulation Versus Self-Commitment in Shaping Researchers' Behavior

    NARCIS (Netherlands)

    Fink, M.; Harms, Rainer; Hatak, Isabella

    2012-01-01

    The governance of nanotechnology seeks to limit its risks, without constraining opportunities. The literature on the effectiveness of approaches to governance has neglected approaches that impact directly on the behavior of a researcher. We analyze the effectiveness of legal regulations versus

  4. Teens Will Be Teens: The Latest Brain Research Has a Lot to Say about Adolescent Behavior

    Science.gov (United States)

    Jones, Jami

    2005-01-01

    Most adults are challenged when it comes to understanding teens' motives. "What were they thinking of?" is an all-too-common response. Without a doubt, no developmental period in life is more confounding and baffling than adolescence. Until recently, erratic teen behavior was blamed on raging hormones, but scientific research in the last decade…

  5. Barriers to Career Success for Minority Researchers in the Behavioral Sciences

    Science.gov (United States)

    Kameny, Rebecca R.; DeRosier, Melissa E.; Taylor, Lorraine C.; McMillen, Janey Sturtz; Knowles, Meagan M.; Pifer, Kimberly

    2014-01-01

    The United States falls short in the diversity of its scientific workforce. While the underrepresentation of minority researchers in the behavioral sciences has been a concern for several decades, policy and training initiatives have been only marginally successful in increasing their number. Diversity plays a critical role in our nation's…

  6. Drugs and Crime: The Relationship of Drug Use and Concomitant Criminal Behavior. Research Issues 17.

    Science.gov (United States)

    Austin, Gregory A., Ed.; Lettieri, Dan J., Ed.

    This volume of abstracts of major research and theoretical studies dealing with the relationship between drug use, criminal behavior and the law is concerned with criminal acts other than the possession of, or trafficking in, illicit drugs. Included are 107 selected studies categorized into seven major topic areas: Reviews and Theories, Drug Use…

  7. Changing Preschool Children's Attitudes into Behavior towards Selected Environmental Issues: An Action Research Study

    Science.gov (United States)

    Ertürk Kara, Gözde; Aydos, E. Hande; Aydin, Özge

    2015-01-01

    The purpose of this study is to provide the transform of attitudes into behavior of 60-72 month of age children continued early childhood education toward environmental issues. Collaborative action research method of qualitative design was used. The whole participants of the study were 60-72 months of age children who were attending in an early…

  8. The Translation of Basic Behavioral Research to School Psychology: A Citation Analysis

    Science.gov (United States)

    Reed, Derek D.

    2008-01-01

    In recent years, school psychology has become increasingly grounded in data-based decision making and intervention design, based upon behavior analytic principles. This paradigm shift has occurred in part by recent federal legislation, as well as through advances in experimental research replicating laboratory based studies. Translating basic…

  9. Type-A Behavior, Gender, and Job Satisfaction: A Research on Instructors

    Science.gov (United States)

    Yazici, Hikmet; Altun, Fatma

    2013-01-01

    There has been some research which investigates the relationship between gender, different personality traits, and job satisfaction in the field of behavioral sciences. The aim of this study is to examine the difference between male and female instructors' job satisfaction and to investigate the predict level of job satisfaction by Type-A…

  10. Select review of the recent (1979-1983) behavioral research literature on training simulators

    International Nuclear Information System (INIS)

    Laughery, K.R.

    1985-05-01

    This report summarizes some selected reports of behavioral research performed in the years 1979 to 1983 on training simulator application technology, and discusses findings related to nuclear power plant operators' simulator training. Findings are organized as related to the design, testing, and use of training simulators. Topics include Simulator Fidelity in Training Effectiveness, Operator Performance Measurement, Measuring Simulator Effectiveness, and Simulator Utilization Practices

  11. The importance of rat social behavior for translational research : An ethological approach

    NARCIS (Netherlands)

    Peters, S.M.

    2018-01-01

    At present, the preclinical research interest in rodent social behavior is focused on its use as readout parameter in animal models for neuropsychiatric disorders (‘translational research’). However, there are some major limitations that hamper progress. Pivotal is the limited translational value of

  12. Research efforts on fuels, fuel models, and fire behavior in eastern hardwood forests

    Science.gov (United States)

    Thomas A. Waldrop; Lucy Brudnak; Ross J. Phillips; Patrick H. Brose

    2006-01-01

    Although fire was historically important to most eastern hardwood systems, its reintroduction by prescribed burning programs has been slow. As a result, less information is available on these systems to fire managers. Recent research and nationwide programs are beginning to produce usable products to predict fuel accumulation and fire behavior. We introduce some of...

  13. Summary of NRC LWR safety research programs on fuel behavior, metallurgy/materials and operational safety

    International Nuclear Information System (INIS)

    Bennett, G.L.

    1979-09-01

    The NRC light-water reactor safety-research program is part of the NRC regulatory program for ensuring the safety of nuclear power plants. This paper summarizes the results of NRC-sponsored research into fuel behavior, metallurgy and materials, and operational safety. The fuel behavior research program provides a detailed understanding of the response of nuclear fuel assemblies to postulated off-normal or accident conditions. Fuel behavior research includes studies of basic fuel rod properties, in-reactor tests, computer code development, fission product release and fuel meltdown. The metallurgy and materials research program provides independent confirmation of the safe design of reactor vessels and piping. This program includes studies on fracture mechanics, irradiation embrittlement, stress corrosion, crack growth, and nondestructive examination. The operational safety research provides direct assistance to NRC officials concerned with the operational and operational-safety aspects of nuclear power plants. The topics currently being addressed include qualification testing evaluation, fire protection, human factors, and noise diagnostics

  14. Physical Activity, Sedentary Behavior, and Diet-Related eHealth and mHealth Research: Bibliometric Analysis.

    Science.gov (United States)

    Müller, Andre Matthias; Maher, Carol A; Vandelanotte, Corneel; Hingle, Melanie; Middelweerd, Anouk; Lopez, Michael L; DeSmet, Ann; Short, Camille E; Nathan, Nicole; Hutchesson, Melinda J; Poppe, Louise; Woods, Catherine B; Williams, Susan L; Wark, Petra A

    2018-04-18

    Electronic health (eHealth) and mobile health (mHealth) approaches to address low physical activity levels, sedentary behavior, and unhealthy diets have received significant research attention. However, attempts to systematically map the entirety of the research field are lacking. This gap can be filled with a bibliometric study, where publication-specific data such as citations, journals, authors, and keywords are used to provide a systematic overview of a specific field. Such analyses will help researchers better position their work. The objective of this review was to use bibliometric data to provide an overview of the eHealth and mHealth research field related to physical activity, sedentary behavior, and diet. The Web of Science (WoS) Core Collection was searched to retrieve all existing and highly cited (as defined by WoS) physical activity, sedentary behavior, and diet related eHealth and mHealth research papers published in English between January 1, 2000 and December 31, 2016. Retrieved titles were screened for eligibility, using the abstract and full-text where needed. We described publication trends over time, which included journals, authors, and countries of eligible papers, as well as their keywords and subject categories. Citations of eligible papers were compared with those expected based on published data. Additionally, we described highly-cited papers of the field (ie, top ranked 1%). The search identified 4805 hits, of which 1712 (including 42 highly-cited papers) were included in the analyses. Publication output increased on an average of 26% per year since 2000, with 49.00% (839/1712) of papers being published between 2014 and 2016. Overall and throughout the years, eHealth and mHealth papers related to physical activity, sedentary behavior, and diet received more citations than expected compared with papers in the same WoS subject categories. The Journal of Medical Internet Research published most papers in the field (9.58%, 164/1712). Most

  15. Corrosion behavior of Fe3Al intermetallics with addition of lithium, cerium and nickel in 2.5 % SO2+N2 at 900 degree centigrade

    International Nuclear Information System (INIS)

    Luna-Ramirez, A.; Porcayo-Calderon, J.; Martinez-Villafane, A.; Gonzalez-Rodriguez, J. G.; Chaon-Nava, J. G.

    2012-01-01

    The corrosion behavior of Fe 3 Al-type intermetallic alloys with addition of 1 at. % cerium, lithium and nickel at high temperature has been studied. The various alloys were exposed to an environment composed of 2.5 % SO 2 +N 2 at 900 degree centigrade for 48 h. For all the intermetallic tested, the corrosion kinetics showed a parabolic behavior. The alloy, which showed less corrosion rate, was the Fe3AlNi alloy, being Fe 3 AlCeLi the alloy with the highest corrosion rate. For the various alloys, energy dispersive X-ray spectroscopy analysis, EDS, on the developed scale only detected aluminum, oxygen, and traces of iron and cerium, suggesting the formation of alumina as main component. The intermetallic alloys showed oxide cracking and spalling. The intermetallic chemical composition played an important role in defining the oxide scale morphology and the extent of damage. (Author) 39 refs.

  16. Commentary on: Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research

    Science.gov (United States)

    De Timary, Philippe; Philippot, Pierre

    2015-01-01

    Background This paper is a commentary to the article entitled: “Are we overpathologizing everyday life? A tenable blueprint for behavioral addiction research”, by Billieux, Schimmenti, Khazaal, Maurage and Heeren (2015). Methods and Aims In this manuscript, we commented on two aspects developed by the authors. Billieux et al. (2015) propose that the recent development of propositions of behavioral addiction is driven by an unwise application of an addiction model to excessive behaviors and rests on a confirmatory research strategy that does not question the psychological processes underlying the development of the conduct. They also show that applying a process driven strategy leads to a more appropriate description of the reality of the behavior and conduct, in particular by describing a variety of motivations for the excessive behavior, which is central to understanding the nature of the conduct. We believe that this new approach, which is fruitful to the emerging domain of behavioral addictions, could also apply to the domain of addictions in general. The latter is characterized by the application of a generic biological model, largely influenced by animal models, focusing on neurophysiological determinants of addiction. This approach may have decreased the attention paid to dimensions of addictions that are more specifically human. We will firstly briefly argue on the limitation of this neurophysiological addiction model for the field of excessive behavioral conducts. Secondly, we will argue for an approach centered on the differentiation of motivations and on the adaptive dimension of the behavior when it first developed and on the evocation of a transition where the conduct became independent of its original function. Conclusions The emerging domain of behavioral addictions, where no animal model has been developed so far, may bring a new reflection that may apply to the domain of addictions in general, with a specific attention to human questions. PMID

  17. A Middle-Range Explanatory Theory of Self-Management Behavior for Collaborative Research and Practice.

    Science.gov (United States)

    Blok, Amanda C

    2017-04-01

    To report an analysis of the concept of self-management behaviors. Self-management behaviors are typically associated with disease management, with frequent use by nurse researchers related to chronic illness management and by international health organizations for development of disease management interventions. A concept analysis was conducted within the context of Orem's self-care framework. Walker and Avant's eight-step concept analysis approach guided the analysis. Academic databases were searched for relevant literature including CIHAHL, Cochrane Databases of Systematic Reviews and Register of Controlled Trials, MEDLINE, PsycARTICLES and PsycINFO, and SocINDEX. Literature using the term "self-management behavior" and published between April 2001 and March 2015 was analyzed for attributes, antecedents, and consequences. A total of 189 journal articles were reviewed. Self-management behaviors are defined as proactive actions related to lifestyle, a problem, planning, collaborating, and mental support, as well as reactive actions related to a circumstantial change, to achieve a goal influenced by the antecedents of physical, psychological, socioeconomic, and cultural characteristics, as well as collaborative and received support. The theoretical definition and middle-range explanatory theory of self-management behaviors will guide future collaborative research and clinical practice for disease management. © 2016 Wiley Periodicals, Inc.

  18. Behavioral intervention technologies: evidence review and recommendations for future research in mental health.

    Science.gov (United States)

    Mohr, David C; Burns, Michelle Nicole; Schueller, Stephen M; Clarke, Gregory; Klinkman, Michael

    2013-01-01

    A technical expert panel convened by the Agency for Healthcare Research and Quality and the National Institute of Mental Health was charged with reviewing the state of research on behavioral intervention technologies (BITs) in mental health and identifying the top research priorities. BITs refers to behavioral and psychological interventions that use information and communication technology features to address behavioral and mental health outcomes. This study on the findings of the technical expert panel. Videoconferencing and standard telephone technologies to deliver psychotherapy have been well validated. Web-based interventions have shown efficacy across a broad range of mental health outcomes. Social media such as online support groups have produced disappointing outcomes when used alone. Mobile technologies have received limited attention for mental health outcomes. Virtual reality has shown good efficacy for anxiety and pediatric disorders. Serious gaming has received little work in mental health. Research focused on understanding reach, adherence, barriers and cost is recommended. Improvements in the collection, storage, analysis and visualization of big data will be required. New theoretical models and evaluation strategies will be required. Finally, for BITs to have a public health impact, research on implementation and application to prevention is required. Copyright © 2013 Elsevier Inc. All rights reserved.

  19. Research on manufacturing service behavior modeling based on block chain theory

    Science.gov (United States)

    Zhao, Gang; Zhang, Guangli; Liu, Ming; Yu, Shuqin; Liu, Yali; Zhang, Xu

    2018-04-01

    According to the attribute characteristics of processing craft, the manufacturing service behavior is divided into service attribute, basic attribute, process attribute, resource attribute. The attribute information model of manufacturing service is established. The manufacturing service behavior information is successfully divided into public and private domain. Additionally, the block chain technology is introduced, and the information model of manufacturing service based on block chain principle is established, which solves the problem of sharing and secreting information of processing behavior, and ensures that data is not tampered with. Based on the key pairing verification relationship, the selective publishing mechanism for manufacturing information is established, achieving the traceability of product data, guarantying the quality of processing quality.

  20. Multi-scale analysis of deformation behavior at SCC crack tip (2). (Contract research)

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Miwa, Yukio; Tsukada, Takashi; Hayakawa, Masao; Nagashima, Nobuo

    2007-03-01

    This report describes a result of the research conducted by the Japan Atomic Energy Agency and the National Institute for Materials Science under contract with Japan Nuclear Energy Safety Organization (JNES) that was concerned with a multi-scale analysis of plastic deformation behavior at the crack tip of stress corrosion cracking (SCC). The research was carried out to evaluate the validity of the SCC growth data acquired in the intergranular SCC (IGSCC) project based on a mechanistic understanding of SCC. For the purpose, in this research, analyses of the plastic deformation behavior and microstructure around the crack tip were performed in a nano-order scale. The hardness measured in nano, meso and macro scales was employed as a common index of the strength, and the essential data necessary to understand the SCC propagation behavior were acquired and analyzed that are mainly a size of plastic deformation region and a microstructural information in the region, e.g. data of crystallografy, microscopic deformation and dislocations at the inside of grains and grain boundaries. In this year, we analyzed the state of plastic deformation region at the crack tip of IGSCC under various conditions and investigated relationship between crack growth behavior and stress intensity factor. Especially, we investigated in detail about two different hardened specimens used in the SCC growth tests in the IGSCC project. (J.P.N.)

  1. Research of lignite oxidation kinetic parameters modified by CuSO4 and NaNO3 initiation additives

    Directory of Open Access Journals (Sweden)

    Larionov Kirill

    2017-01-01

    Full Text Available An experimental study and subsequent analytical assessment of activation energy change in lignite oxidation process with addition of NaNO3 and CuSO4 mineral salts were conducted. The results showed that injection of catalytic additives leads to reduction of coal activation energy and reaction initial temperature.

  2. Research

    African Journals Online (AJOL)

    abp

    2016-07-12

    Jul 12, 2016 ... multiple risk factors provides support for multiple-behavior interventions as ... consumption) with smoking therefore needs further research. As such this study .... restaurants, in bars, and on a statewide basis. They preferred to.

  3. Independent contributions of the central executive, intelligence, and in-class attentive behavior to developmental change in the strategies used to solve addition problems.

    Science.gov (United States)

    Geary, David C; Hoard, Mary K; Nugent, Lara

    2012-09-01

    Children's (N=275) use of retrieval, decomposition (e.g., 7=4+3 and thus 6+7=6+4+3), and counting to solve additional problems was longitudinally assessed from first grade to fourth grade, and intelligence, working memory, and in-class attentive behavior was assessed in one or several grades. The goal was to assess the relation between capacity of the central executive component of working memory, controlling for intelligence and in-class attentive behavior, and grade-related changes in children's use of these strategies. The predictor on intercept effects from multilevel models revealed that children with higher central executive capacity correctly retrieved more facts and used the most sophisticated counting procedure more frequently and accurately than their lower capacity peers at the beginning of first grade, but the predictor on slope effects indicated that this advantage disappeared (retrieval) or declined in importance (counting) from first grade to fourth grade. The predictor on slope effects also revealed that from first grade to fourth grade, children with higher capacity adopted the decomposition strategy more quickly than other children. The results remained robust with controls for children's sex, race, school site, speed of encoding Arabic numerals and articulating number words, and mathematics achievement in kindergarten. The results also revealed that intelligence and in-class attentive behavior independently contributed to children's strategy development. Copyright © 2012 Elsevier Inc. All rights reserved.

  4. The Sliding Wear and Friction Behavior of M50-Graphene Self-Lubricating Composites Prepared by Laser Additive Manufacturing at Elevated Temperature

    Science.gov (United States)

    Liu, Xiyao; Shi, Xiaoliang; Huang, Yuchun; Deng, Xiaobin; Lu, Guanchen; Yan, Zhao; Zhou, Hongyan; Xue, Bing

    2018-03-01

    M50 steel is widely applied to manufacture aircraft bearings where service lives are mainly determined by the friction and wear behaviors. The main purpose of this study is to investigate the tribological behaviors and wear mechanisms of M50-1.5 wt.% graphene composites (MGC) prepared by laser additive manufacturing (LAM) (MGC-LAM) sliding against Si3N4 ball from 25 to 550 °C at 18 N-0.2 m/s. XRD, EPMA, FESEM, and EDS mapping were conducted to understand the major mechanisms leading to the improvement in the sliding behavior of MGC-LAM. The results indicated that MGC-LAM showed the excellent friction and wear performance at 25-550 °C for the lower friction coefficient of 0.16-0.52 and less wear rate of 6.1-9.5 × 10-7 mm3 N-1 m-1. Especially at 350 °C, MGC-LAM obtained the best tribological performance (0.16, 6.1 × 10-7mm3 N-1 m-1). It was attributed to the dense coral-like microstructure, as well as the formed surface lubricating structure which is composed of the upper uniform lubricating film with massive graphene and the underneath compacted layer.

  5. Health psychology and translational genomic research: bringing innovation to cancer-related behavioral interventions.

    Science.gov (United States)

    McBride, Colleen M; Birmingham, Wendy C; Kinney, Anita Y

    2015-01-01

    The past decade has witnessed rapid advances in human genome sequencing technology and in the understanding of the role of genetic and epigenetic alterations in cancer development. These advances have raised hopes that such knowledge could lead to improvements in behavioral risk reduction interventions, tailored screening recommendations, and treatment matching that together could accelerate the war on cancer. Despite this optimism, translation of genomic discovery for clinical and public health applications has moved relatively slowly. To date, health psychologists and the behavioral sciences generally have played a very limited role in translation research. In this report we discuss what we mean by genomic translational research and consider the social forces that have slowed translational research, including normative assumptions that translation research must occur downstream of basic science, thus relegating health psychology and other behavioral sciences to a distal role. We then outline two broad priority areas in cancer prevention, detection, and treatment where evidence will be needed to guide evaluation and implementation of personalized genomics: (a) effective communication, to broaden dissemination of genomic discovery, including patient-provider communication and familial communication, and (b) the need to improve the motivational impact of behavior change interventions, including those aimed at altering lifestyle choices and those focusing on decision making regarding targeted cancer treatments and chemopreventive adherence. We further discuss the role that health psychologists can play in interdisciplinary teams to shape translational research priorities and to evaluate the utility of emerging genomic discoveries for cancer prevention and control. PsycINFO Database Record (c) 2015 APA, all rights reserved.

  6. Organizing intelligence: development of behavioral science and the research based model of business education.

    Science.gov (United States)

    Bottom, William P

    2009-01-01

    Conventional history of the predominant, research-based model of business education (RBM) traces its origins to programs initiated by the Ford Foundation after World War II. This paper maps the elite network responsible for developing behavioral science and the Ford Foundation agenda. Archival records of the actions taken by central nodes in the network permit identification of the original vision statement for the model. Analysis also permits tracking progress toward realizing that vision over several decades. Behavioral science was married to business education from the earliest stages of development. The RBM was a fundamental promise made by advocates for social science funding. Appraisals of the model and recommendations for reform must address its full history, not the partial, distorted view that is the conventional account. Implications of this more complete history for business education and for behavioral theory are considered.

  7. In situ tests for investigating thermal and mechanical rock behaviors at an underground research tunnel

    International Nuclear Information System (INIS)

    Kwon, Sangki; Cho, Won-Jin

    2013-01-01

    The understanding of the thermal and mechanical behaviors expected to be happened around an underground high-level radioactive waste (HLW) repository is important for a successful site selection, construction, operation, and closure of the repository. In this study, the thermal and mechanical behaviors of rock and rock mass were investigated from in situ borehole heater test and the studies for characterizing an excavation damaged zone (EDZ), which had been carried out at an underground research tunnel, KURT, constructed in granite for the validation of a HLW disposal concept. Thermal, mechanical, and hydraulic properties in EDZ could be predicted from various in situ and laboratory tests as well as numerical simulations. The complex thermo-mechanical coupling behavior of rock could be modeled using the rock properties. (author)

  8. Effect of MgCl2 addition on the sintering behavior of MgAl2O4 spinel and formation of nano-particles

    Directory of Open Access Journals (Sweden)

    Mohammadi F.

    2014-01-01

    Full Text Available In this paper, the effect of MgCl2 addition on the sintering behavior of MgAl2O4 spinel produced via oxide mixture method was investigated. For this reason, the stoichiometric mixture of magnesite and calcined alumina as raw materials was calcined at 1100°C. The calcined mixture was milled, pressed and then, fired at 1300 and 1500°C after addition of various amounts of MgCl2. Besides, the physical properties, phase composition and microstructure of fired samples were investigated. The results showed that MgCl2 addition has great effect on the densification and particle size of spinel. Besides, MgCl2 addition increases the amount of spinel phase at all firing temperatures. Due to the decomposition of MgCl2 and then formation of ultra-fine MgO particles, the nano-sized spinel is formed on the surface of the larger spinel particles.

  9. Effect of Y addition on crystallization behavior and soft-magnetic properties of Fe{sub 78}Si{sub 9}B{sub 13} ribbons

    Energy Technology Data Exchange (ETDEWEB)

    Zhanwei, Liu; Dunbo, Yu, E-mail: yudb2008@126.com; Kuoshe, Li; Yang, Luo; Chao, Yuan; Zilong, Wang; Liang, Sun; Kuo, Men

    2017-08-15

    Highlights: • Thermal stability of Fe-Si-B amorphous alloy is enhanced by Y addition. • Y addition can improve soft magnetic properties of Fe-Si-B amorphous alloy. • Decomposition of metastable Fe{sub 3}B phase is related to Y content in Fe-Si-B matrix. - Abstract: A series of amorphous Fe-Si-B ribbons with various Y addition were prepared by melt-spinning. The effect of Y addition on crystallization behavior, thermal and magnetic properties was systematically investigated. With the increase of Y content, the initial crystallization temperature shifted to a higher temperature, indicating that the thermal stability of amorphous state in Fe-Si-B-Y ribbon is enhanced compared to that of Fe-Si-B alloy. Meanwhile, compared to the two exothermic peaks in the samples with lower Y content, a new exothermic peak was found in the ribbons with Y content higher than 1 at%, which corresponded to the decomposition of metastable Fe{sub 3}B phase. Among all the alloys, Fe{sub 76.5}Si{sub 9}B{sub 13}Y{sub 1.5} alloy exhibits optimized magnetic properties, with high saturation magnetization M{sub s} of 187 emu/g and low coercivity H{sub cJ} of 7.6 A/m.

  10. 34 CFR 660.32 - What additional selection criteria does the Secretary use for an application for a research...

    Science.gov (United States)

    2010-07-01

    ..., DEPARTMENT OF EDUCATION THE INTERNATIONAL RESEARCH AND STUDIES PROGRAM How Does the Secretary Make a Grant... use for an application for a research project, a survey, or a study? 660.32 Section 660.32 Education... purposes of the International Education Program authorized by part A of title VI of the HEA. (d...

  11. The theoretical basis for practice-relevant medication use research: patient-centered/behavioral theories.

    Science.gov (United States)

    Blalock, Susan J

    2011-12-01

    There is an urgent need for research to improve the quality of medication use among those who require pharmacotherapy. To describe how behavioral science theories can help to achieve this goal. We begin by describing what a theory is and the functions that theories serve. We then provide 8 guiding principles that are crucial for investigators to understand if they are to use theory appropriately. We conclude by discussing the need for a new model of patient medication self-management that incorporates information concerning factors operating at all levels of the ecological framework, ranging from patient-level to societal-level factors. The 8 guiding principles discussed are the following: (1) There is no single theory that is appropriate for guiding all medication use research; (2) Behavioral science theories are probabilistic, not deterministic; (3) When trying to influence a health behavior, the health behavior of interest must be defined precisely; (4) Many factors outside of patient control influence patient medication use; (5) Every patient is unique; (6) Patient motivation is a fundamental ingredient required to optimize medication use, especially when maintenance of long term behavior is the goal; (7) Health care providers can have a profound effect on patient medication use, and this effect can operate through several possible causal pathways; and (8) When planning an intervention to optimize medication use, it is important to develop a conceptual model that links intervention inputs to the ultimate outcomes that are desired. Medication use can be influenced by a wide variety of factors acting at different levels of the ecological model. The quality of research on medication use could be improved by development of an ecological model specific to medication self-management. Copyright © 2011 Elsevier Inc. All rights reserved.

  12. Study on crystalline rock for evaluating method of long-term behavior. FY2012 (Contract research)

    International Nuclear Information System (INIS)

    Fukui, Katsunori; Hashiba, Kimihiro; Tanno, Takeo; Hikima, Ryoichi; Sanada, Hiroyuki; Sato, Toshinori

    2013-12-01

    Rock shows time-dependent behavior such as creep/relaxation. With respect to high-level radioactive waste disposal, knowledge of the long-term mechanical stability of shafts and galleries excavated in rock are required, over a period of thousands of years after closure as well as during construction and operation. Therefore, it is very important to understand the time-dependent behavior of rock for evaluating long-term mechanical stability. The purpose of this study is to determine the mechanisms of time-dependent behavior of rock by the precise test (e.g. laboratory creep test), observation and measurement and to develop methods for evaluating long-term mechanical stability. In previous works, testing techniques were established and basic evaluation methods were developed. Recently, some parameters, which required for simulation of time-dependent behavior, were determined for the modeling of biotite granite (Toki granite) distributed around the Mizunami underground research laboratory. However, we were not able to obtain enough data to assess the reliability of the method to evaluate these parameters. This report describes the results of the research activities carried out in fiscal year 2012. In Chapter 1, we provide background and an overview of this study. In Chapter 2, the results of a long-term creep test on Tage tuff, started in fiscal year 1997, are described. In Chapter 3, the experimental results concerning the loading-rate dependency of rock strength were examined to understand the time-dependent behavior of rock. In Chapter 4, the stability of tunnels, under conditions which rock stress is larger than that around a circular tunnel, were examined to obtain useful information on the future plan for in-situ tests in the underground research laboratory. (author)

  13. Is Sexual Behavior Healthy for Adolescents? A Conceptual Framework for Research on Adolescent Sexual Behavior and Physical, Mental, and Social Health

    Science.gov (United States)

    Vasilenko, Sara A.; Lefkowitz, Eva S.; Welsh, Deborah P.

    2014-01-01

    Although research has increasingly emphasized how adolescent sexual behavior may be associated with aspects of health beyond unwanted pregnancy and sexually transmitted infections, no current theoretical or conceptual model fully explains associations between sexual behavior and multiple facets of health. We provide a conceptual model that…

  14. The Role of Serotonin (5-HT) in Behavioral Control: Findings from Animal Research and Clinical Implications

    Science.gov (United States)

    Sanchez, CL; Biskup, CS; Herpertz, S; Gaber, TJ; Kuhn, CM; Hood, SH

    2015-01-01

    The neurotransmitters serotonin and dopamine both have a critical role in the underlying neurobiology of different behaviors. With focus on the interplay between dopamine and serotonin, it has been proposed that dopamine biases behavior towards habitual responding, and with serotonin offsetting this phenomenon and directing the balance toward more flexible, goal-directed responding. The present focus paper stands in close relationship to the publication by Worbe et al. (2015), which deals with the effects of acute tryptophan depletion, a neurodietary physiological method to decrease central nervous serotonin synthesis in humans for a short period of time, on the balance between hypothetical goal-directed and habitual systems. In that research, acute tryptophan depletion challenge administration and a following short-term reduction in central nervous serotonin synthesis were associated with a shift of behavioral performance towards habitual responding, providing further evidence that central nervous serotonin function modulates the balance between goal-directed and stimulus-response habitual systems of behavioral control. In the present focus paper, we discuss the findings by Worbe and colleagues in light of animal experiments as well as clinical implications and discuss potential future avenues for related research. PMID:25991656

  15. Parenting Styles and Practices in Children's Obesogenic Behaviors: Scientific Gaps and Future Research Directions

    Science.gov (United States)

    Hennessy, Erin; McSpadden, Kate; Oh, April

    2013-01-01

    Abstract Given the emerging global childhood obesity epidemic and the specter of a generation of children who will have a shorter life expectancy than that of their parents, recent research has focused on factors that influence children's weight status and obesogenic behaviors (i.e., eating, physical activity, and screen media use). Parents act as primary socializing agents for children, and thus growing evidence supports the role of parenting styles and practices in children's obesity-related behaviors and weight. Studying these processes in children and adolescents is important for several reasons. First, diet and physical activity behaviors and weight status track from childhood and adolescence into adulthood. Furthermore, diet and physical activity behaviors and weight status confer significant risk for cancer, diabetes, cardiovascular disease, and other chronic diseases. The purpose of this article is to describe the scientific gaps that need to be addressed to develop a more informed literature on parenting styles and practices in the domains of weight status and obesogenic behaviors, as identified by an expert panel assembled by the National Cancer Institute. PMID:23944926

  16. Differences Between Landline and Mobile Phone Users in Sexual Behavior Research.

    Science.gov (United States)

    Badcock, Paul B; Patrick, Kent; Smith, Anthony M A; Simpson, Judy M; Pennay, Darren; Rissel, Chris E; de Visser, Richard O; Grulich, Andrew E; Richters, Juliet

    2017-08-01

    This study investigated differences between the demographic characteristics, participation rates (i.e., agreeing to respond to questions about sexual behavior), and sexual behaviors of landline and mobile phone samples in Australia. A nationally representative sample of Australians aged 18 years and over was recruited via random digit dialing in December 2011 to collect data via computer-assisted telephone interviews. A total of 1012 people (370 men, 642 women) completed a landline interview and 1002 (524 men, 478 women) completed a mobile phone interview. Results revealed that telephone user status was significantly related to all demographic variables: gender, age, educational attainment, area of residence, country of birth, household composition, and current ongoing relationship status. In unadjusted analyses, telephone status was also associated with women's participation rates, participants' number of other-sex sexual partners in the previous year, and women's lifetime sexual experience. However, after controlling for significant demographic factors, telephone status was only independently related to women's participation rates. Post hoc analyses showed that significant, between-group differences for all other sexual behavior outcomes could be explained by demographic covariates. Results also suggested that telephone status may be associated with participation bias in research on sexual behavior. Taken together, these findings highlight the importance of sampling both landline and mobile phone users to improve the representativeness of sexual behavior data collected via telephone interviews.

  17. KINS Research Activities on the iodine behavior in containment during a severe accident

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hanchul; Kim, Dosam [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Oh, Jaeyong; Yun, Jongil [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Cho, Songwon [Korea Radiation Technology Institute, Daejeon (Korea, Republic of)

    2012-03-15

    Iodine is a major contributor to the potential health risk for the public following a severe accident from a nuclear power plant. Volatile iodine and organic iodides can be generated from the containment sump through various kinds of reactions and be released to the environment. This iodine behavior has been an important topic for the international research programs run by the OECD/NEA and EU-SARNET2. Korea Institute of Nuclear Safety (KINS) also has joined ISTP-EPICUR (Experimental Program on Iodine Chemistry under Radiation) and OECD-BIP (Behavior of Iodine Project). In the course of researching this issue with these experimental programs, a simple iodine model, RAIM, has been developed and coupled with the MELCOR code for radiological consequence analysis. This methodology is likely to provide a technical basis for developing the regulatory requirements concerning a severe accident including accident source term, which is one of urgent domestic needs.

  18. Co-Operative Advances in Behavioral Health and Performance Research and Operations

    Science.gov (United States)

    VanderArk, Stephen T.; Leveton, Lauren B.

    2011-01-01

    In organizations that engage in both operations and applied research, with operational needs guiding research questions and research informing improved operations, the ideal goal is a synergy of ideas and information. In reality, this ideal synergy is often lacking. Real-time operational needs driving day-to-day decisions, lack of communication, lag time in getting research advances plugged into operations can cause both areas to suffer from this gap between operations and research. At Johnson Space Center, the Behavior Health and Performance group (BHP) strives to bridge this gap by following a Human Research Program framework: Expectations of future operational needs identify the knowledge gaps; the gaps in turn guide research leading to a product that is transitioned into operations. Thus, the direction those of us in research take is in direct response to current and future needs of operations. Likewise, those of us in operations actively seek knowledge that is supported by evidence-based research. We make an ongoing effort to communicate across the research and operations gap by working closely with each other and making a conscious effort to keep each other informed. The objective of the proposed panel discussion is to demonstrate through the following presentations the results of a successful collaboration between research and operations and to provide ASMA members with more practical knowledge and strategies for building these bridges to serve our field of practice well. The panel will consist of six presenters from BHP operations, internal BHP research, and external research instigated by BHP who together represent the entire BHP Research Transition to Operations Framework

  19. Influence of hydrogen addition to a sweep gas on tritium behavior in a blanket module containing Li{sub 2}TiO{sub 3} pebbles

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, K., E-mail: kadzu@nucl.kyushu-u.ac.jp [Department of Advanced Energy Engineering Science, Kyushu University 6-1, Kasugakoen, Kasuga-shi, Fukuoka 816-8580 (Japan); Someya, Y.; Tobita, K. [National Institutes for Quantum and radiological Science and Technology, 2-166 Omotedate, Obuchi, Rokkasho-mura, Kamikita-gun, Aomori 039-3212 (Japan); Fukada, S. [Department of Advanced Energy Engineering Science, Kyushu University 6-1, Kasugakoen, Kasuga-shi, Fukuoka 816-8580 (Japan); Hatano, Y. [Hydrogen Isotope Research Center, University of Toyama, Gofuku 3190, Toyama 930-8555 (Japan); Chikada, T. [Department of Chemistry, Graduate school of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka, 422-8529 (Japan)

    2016-12-15

    Highlights: • Mass balance equations of H{sub 2}, H{sub 2}O, T{sub 2} and T{sub 2}O in a Li{sub 2}TiO{sub 3} pebble bed were numerically calculated. • In the temperature rising process, the pebbles were exposed to water vapor of relatively high concentration. • Tritium permeation rate to cooling water reduced with increasing hydrogen concentration in the sweep gas. • Tritium inventory in the grain bulk and the grain surface occupied 99.6% of total inventory. - Abstract: Hydrogen addition to a sweep gas of a solid breeder blanket module has been proposed to enhance tritium recovery from the surface of the breeders. However, the influence of hydrogen addition on the bred tritium behavior is not understood completely. Tritium behavior in the simplified blanket module of Li{sub 2}TiO{sub 3} pebbles was numerically calculated considering diffusion in the grain bulk, surface reactions on the grain surface and permeation through the cooling pipe. Although a partial pressure of T{sub 2} increases with increasing a partial pressure of H{sub 2} in the sweep gas, it was estimated that tritium permeation rate to the cooling water decreases. Additionally, the release duration of water vapor generated by the reaction of the pebbles and hydrogen is shortened with increasing a partial pressure of H{sub 2}. Tritium inventory in the grain bulk and the grain surface occupies 99.6 % of total tritium inventory in the blanket module.

  20. Psychological, behavioral and social effects of disclosing Alzheimer's disease biomarkers to research participants: a systematic review.

    Science.gov (United States)

    Bemelmans, S A S A; Tromp, K; Bunnik, E M; Milne, R J; Badger, S; Brayne, C; Schermer, M H; Richard, E

    2016-11-10

    Current Alzheimer's disease (AD) research initiatives focus on cognitively healthy individuals with biomarkers that are associated with the development of AD. It is unclear whether biomarker results should be returned to research participants and what the psychological, behavioral and social effects of disclosure are. This systematic review therefore examines the psychological, behavioral and social effects of disclosing genetic and nongenetic AD-related biomarkers to cognitively healthy research participants. We performed a systematic literature search in eight scientific databases. Three independent reviewers screened the identified records and selected relevant articles. Results extracted from the included articles were aggregated and presented per effect group. Fourteen studies met the inclusion criteria and were included in the data synthesis. None of the identified studies examined the effects of disclosing nongenetic biomarkers. All studies but one concerned the disclosure of APOE genotype and were conducted in the USA. Study populations consisted largely of cognitively healthy first-degree relatives of AD patients. In this group, disclosure of an increased risk was not associated with anxiety, depression or changes in perceived risk in relation to family history. Disclosure of an increased risk did lead to an increase in specific test-related distress levels, health-related behavior changes and long-term care insurance uptake and possibly diminished memory functioning. In cognitively healthy research participants with a first-degree relative with AD, disclosure of APOE ε4-positivity does not lead to elevated anxiety and depression levels, but does increase test-related distress and results in behavior changes concerning insurance and health. We did not find studies reporting the effects of disclosing nongenetic biomarkers and only one study included people without a family history of AD. Empirical studies on the effects of disclosing nongenetic biomarkers

  1. Social and behavioral research on risk: uses in risk management decision-making

    International Nuclear Information System (INIS)

    Covello, V.T.

    1984-01-01

    The overall objective of this paper is to describe the principal uses of social and behavioral research in risk management decision-making. Five such uses are identified and discussed, including uses in (1) identifying the nature and extent of public concern; (2) structuring public debate and resolving conflicts; (3) anticipating public responses to new technologies; (4) conducting and informing the public; and (5) designing and implementing risk management policies and systems. (author)

  2. Judgments of Restrictiveness, Social Acceptability, and Usage: Review of Research on Procedures to Decrease Behavior

    OpenAIRE

    Morgan, Robert L.

    1989-01-01

    Research on professionals’, consumers’, and others’ judgments of the restrictiveness, social acceptability, and estimated frequency of use of procedures to decrease behavior were reviewed. General findings were that (a) respondents generally were consistent in rating procedures from least to most restrictive; (b) most respondents agreed that procedures judged more restrictive should be used as a last resort; (c) more restrictive procedures were not frequently used in practice; (d) respondents...

  3. Exotic behavior of molecules in intense laser light fields. New research directions

    Energy Technology Data Exchange (ETDEWEB)

    Yamanouchi, Kaoru [Tokyo Univ., Department of Chemistry, Tokyo (Japan)

    2002-08-01

    The recent investigation of the dynamical behavior of molecules and clusters in intense laser fields has afforded us invaluable opportunities to understand fundamentals of the interaction between molecular species and light fields as well as to manipulate molecules and their dynamical pathways by taking advantage of characteristics of coherent ultrashort laser light fields. In the present report, new directions of this rapidly growing interdisciplinary research fields called molecular science in intense laser fields are discussed by referring to our recent studies. (author)

  4. Sociocultural Behavior Research and Engineering in the Department of Defense Context

    Science.gov (United States)

    2011-09-01

    sponsored by the Incisive Analysis Office is Socio-cultural Content in Language ( SCIL ). SCIL explores and develops novel designs, algorithms, methods...to meet the grand challenge of shaping the future force. DLO and programs such as IARPA’s SCIL are important for addressing persisting gaps in...programs conducting research relevant to building defense-related capabilities in sociocultural behavior. The Socio-Cultural Content in Language ( SCIL

  5. Experimental researches on the single-bubble rising behavior in the water excited by oscillation

    International Nuclear Information System (INIS)

    Cai Jiejin; Zhong Minghuang; Wang Ke; Zeng Xixiang; Lin Yongcheng; WATANABE Tadashi

    2014-01-01

    This study try to carry out experiments to research the bubble rising behavior in the water excited by oscillation and focus on its dynamics characteristics under the oscillation condition with different oscillation frequencies and amplitudes, and get the relationship between bubble's characteristic parameter, such as the bubble shape, rising velocity, etc, and the influence parameters of time, oscillation frequencies, amplitudes, etc. The rising rule of the single bubble in the water excited by oscillation has been concluded. (authors)

  6. Phytogenic additive on diet of dairy heifers: Performance and behavior parameters Desempenho produtivo e comportamento de novilhas submetidas a dietas com aditivo fitogênico

    Directory of Open Access Journals (Sweden)

    Fernando Reimann Skonieski

    2009-12-01

    Full Text Available This experiment evaluated the effects in the performance and behavior parameters of Jersey dairy heifers supplemented with herbal extracts. The experiment was conducted in Boapaba Ranch, Silveira Martins (RS, from July to September, 2004, utilizing 12 Jersey’s heifers. The animals were separated in two groups, with the same number of replications, considered a Control group (without addition of phytogenic additive and a Treatment group (with inclusion of 500 grams of phytogenic additive per ton. of concentrate. The phytogenic additive utilized was a commercial blend of essential oils, flavonoids and mucilage. The animals received daily, divided in two feeding, 2 kg. of concentrate and, 3 kg. of alfalfa hay and 10 kg. of chopped fresh black oat and ryegrass. The performance parameters evaluated were initial weight, final weight, and daily average daily weight gain and feed conversion and behavior parameters analyzed were feeding behavior, time of intake for concentrate and roughage, rectal temperature, and cardiac frequency. There were not significantly differences (P > 0.05 between treatments for performance parameters in general analysis of data, but occurred significantly differences between treatments when analyzed the periods (P< 0.05. Significant differences could be observed in feeding behavior (P < 0.05, cardiac frequency (P < 0.05, and time of intake for concentrate (P < 0.002,. The authors leading to the conclusion that the herbal extract influence on the performance and behavior parameters of dairy heifers receiving this supplement.Este experimento avaliou os efeitos no desempenho e no comportamento de novilhas leiteiras suplementadas com extratos herbais. O experimento foi conduzido na Granja Boapaba, no município de Silveira Martins (RS, de julho a setembro de 2004, com a utilização de 12 novilhas da raça Jersey. Os animais foram separados em dois grupos, com o mesmo número de indivíduos, considerados como grupo-controle (sem

  7. Financial remuneration for clinical and behavioral research participation: ethical and practical considerations.

    Science.gov (United States)

    Permuth-Wey, Jennifer; Borenstein, Amy R

    2009-04-01

    Although the practice of providing payment to clinical research participants has been ongoing for more than a century, it remains an ethically controversial topic among members of the research community. The aims of this commentary are to summarize ethical and practical considerations regarding financial remuneration of research participants and to make recommendations for researchers contemplating this practice. A PubMed search was conducted to explore the ethical implications surrounding financial remuneration and review the body of empiric data on this topic. Financial remuneration is perceived to be ethically acceptable by many researchers and research participants and can be helpful in the recruitment process. It is recommended that when investigators are contemplating whether to offer payment to research participants, they should consider the nature of the study and the potential benefits and risks to the participants, institutional or organizational guidelines, and cultural and societal norms specific to the population being studied. Financial remuneration has the ability to serve as a sign of appreciation for the contributions of research participants and a way to facilitate clinical and behavioral research.

  8. Information-Seeking Behaviors of Dental Practitioners in Three Practice-Based Research Networks

    Science.gov (United States)

    Botello-Harbaum, Maria T.; Demko, Catherine A.; Curro, Frederick A.; Rindal, D. Brad; Collie, Damon; Gilbert, Gregg H.; Hilton, Thomas J.; Craig, Ronald G.; Wu, Juliann; Funkhouser, Ellen; Lehman, Maryann; McBride, Ruth; Thompson, Van; Lindblad, Anne

    2013-01-01

    Research on the information-seeking behaviors of dental practitioners is scarce. Knowledge of dentists’ information-seeking behaviors should advance the translational gap between clinical dental research and dental practice. A cross-sectional survey was conducted to examine the self-reported information-seeking behaviors of dentists in three dental practice-based research networks (PBRNs). A total of 950 dentists (65 percent response rate) completed the survey. Dental journals and continuing dental education (CDE) sources used and their influence on practice guidance were assessed. PBRN participation level and years since dental degree were measured. Full-participant dentists reported reading the Journal of the American Dental Association and General Dentistry more frequently than did their reference counterparts. Printed journals were preferred by most dentists. A lower proportion of full participants obtained their CDE credits at dental meetings compared to partial participants. Experienced dentists read other dental information sources more frequently than did less experienced dentists. Practitioners involved in a PBRN differed in their approaches to accessing information sources. Peer-reviewed sources were more frequently used by full participants and dentists with fifteen years of experience or more. Dental PBRNs potentially play a significant role in the dissemination of evidence-based information. This study found that specific educational sources might increase and disseminate knowledge among dentists. PMID:23382524

  9. The Benefits and Challenges of Multiple Health Behavior Change in Research and in Practice

    Science.gov (United States)

    Prochaska, Judith J.; Nigg, Claudio R.; Spring, Bonnie; Velicer, Wayne F.; Prochaska, James O.

    2009-01-01

    Objective The major chronic diseases are caused by multiple risks, yet the science of multiple health behavior change (MHBC) is at an early stage, and factors that facilitate or impede scientists’ involvement in MHBC research are unknown. Benefits and challenges of MHBC interventions were investigated to strengthen researchers’ commitment and prepare them for challenges. Method An online anonymous survey was emailed to listservs of the Society of Behavioral Medicine between May 2006 and 2007. Respondents (N = 69) were 83% female; 94% held a doctoral degree; 64% were psychologists, 24% were in public health; 83% targeted MHBC in their work. Results A sample majority rated 23 of the 24 benefits, but only 1 of 31 challenge items, as very-to-extremely important. Those engaged in MHBC rated the total benefits significantly higher than respondents focused on single behaviors, F(1,69) = 4.21, pbehaviors do not fully appreciate the benefits that impress MHBC researchers; it is not that substantial barriers are holding them back. Benefits of MHBC interventions need emphasizing more broadly to advance this research area. PMID:19948184

  10. Quantitative marketing research on behavior of the small and medium companies on financial advisory services

    Directory of Open Access Journals (Sweden)

    Duguleana, L.

    2013-12-01

    Full Text Available This paper presents the results of quantitative marketing research conducted among small and medium enterprises in Braşov County. The research identified organizational elements of the consumer behavior in the use of the financial advisory services. The objective is to determine whether there is association between firm size and the number of financial advice services outsourced. Results of the study will be based construction of the price policy for financial advisory firms, tailored to the financial constraints faced by small and medium enterprises in Romania.

  11. Using a Virtual Store As a Research Tool to Investigate Consumer In-store Behavior.

    Science.gov (United States)

    Ploydanai, Kunalai; van den Puttelaar, Jos; van Herpen, Erica; van Trijp, Hans

    2017-07-24

    People's responses to products and/or choice environments are crucial to understanding in-store consumer behaviors. Currently, there are various approaches (e.g., surveys or laboratory settings) to study in-store behaviors, but the external validity of these is limited by their poor capability to resemble realistic choice environments. In addition, building a real store to meet experimental conditions while controlling for undesirable effects is costly and highly difficult. A virtual store developed by virtual reality techniques potentially transcends these limitations by offering the simulation of a 3D virtual store environment in a realistic, flexible, and cost-efficient way. In particular, a virtual store interactively allows consumers (participants) to experience and interact with objects in a tightly controlled yet realistic setting. This paper presents the key elements of using a desktop virtual store to study in-store consumer behavior. Descriptions of the protocol steps to: 1) build the experimental store, 2) prepare the data management program, 3) run the virtual store experiment, and 4) organize and export data from the data management program are presented. The virtual store enables participants to navigate through the store, choose a product from alternatives, and select or return products. Moreover, consumer-related shopping behaviors (e.g., shopping time, walking speed, and number and type of products examined and bought) can also be collected. The protocol is illustrated with an example of a store layout experiment showing that shelf length and shelf orientation influence shopping- and movement-related behaviors. This demonstrates that the use of a virtual store facilitates the study of consumer responses. The virtual store can be especially helpful when examining factors that are costly or difficult to change in real life (e.g., overall store layout), products that are not presently available in the market, and routinized behaviors in familiar

  12. A Compendium of Social-Behavioral Research Funded by NCER and NCSER: 2002-2013. NCER 2016-2002

    Science.gov (United States)

    Yamaguchi, Ryoko; Hall, Adam; Stapleton, Katina; Doolittle, Emily; Buckley, Jacquelyn

    2016-01-01

    The purpose of this compendium is to catalog NCER's and NCSER's contributions to social-behavioral research. Research undertaken as part of these projects is contributing to a knowledge base that ultimately aims to improve academic outcomes for students via improvements in students' social-behavioral competencies, teachers' practices, and the…

  13. [Influences of ion-suppressors on retention behaviors of nine food additives in reversed-phase high performance liquid chromatographic separation].

    Science.gov (United States)

    Zhao, Yonggang; Chen, Xiaohong; Li, Xiaoping; Yao, Shanshan; Jin, Micong

    2011-10-01

    The influences of ion-suppressors on retention behaviors of nine food additives, i.e., acesulfame, saccharin, caffeine, aspartame, benzoic acid, sorbic acid, stevioside, dehydroacetic acid and neotame in reversed-phase high performance liquid chromatographic (RP-HPLC) separation were investigated. The organic modification effects of acids, i. e. , trifluoroacetic acid (TFA) and buffer salts, i. e. , TFA-ammonium acetate (AmAc) were studied emphatically. The relationships between retention factors of solutes and volume percentages of ion-suppressors in the mobile phase systems of acetonitrile-TFA aqueous solution and acetonitrile-TFA-AmAc aqueous solution were quantitatively established, separately. The separation of nine food additives was completed by a gradient elution with acetonitrile-TFA (0.01%, v/v)-AmAc (2. 5 mmol/L) aqueous solution as the mobile phases. An RP-HPLC method was established for the simultaneous determination of nine food additives in red wine. In the range of 10. 0 - 100. 0 mg/L, nine food additives showed good linearity with the correlation coefficients ( r2 ) larger than 0. 999 1. The limits of detection (LODs) were in the range of 0. 33 - 2. 36 mg/L and the limits of quantification (LOQs) were in the range of 1. 11 - 7. 80 mg/L. The spiked recoveries were between 87. 61% and 108. 4% with the relative standard deviations (RSDs) of 2. 2% -9. 4%. These results are of referential significance for the rapid establishment and accu- rate optimization of RP-HPLC separation for the simultaneous determination of food additives in other foods.

  14. Effects of Quartz Particle Size and Sucrose Addition on Melting Behavior of a Melter Feed for High-Level Waste Glass

    International Nuclear Information System (INIS)

    Marcial, Jose; Hrma, Pavel R.; Schweiger, Michael J.; Swearingen, Kevin J.; Tegrotenhuis, Nathan E.; Henager, Samuel H.

    2010-01-01

    The behavior of melter feed (a mixture of nuclear waste and glass-forming additives) during waste-glass processing has a significant impact on the rate of the vitrification process. We studied the effects of silica particle size and sucrose addition on the volumetric expansion (foaming) of a high-alumina feed and the rate of dissolution of silica particles in feed samples heated at 5 C/min up to 1200 C. The initial size of quartz particles in feed ranged from 5 to 195 (micro)m. The fraction of the sucrose added ranged from 0 to 0.20 g per g glass. Extensive foaming occurred only in feeds with 5-(micro)m quartz particles; particles (ge) 150 (micro)m formed clusters. Particles of 5 (micro)m completely dissolved by 900 C whereas particles (ge) 150 (micro)m did not fully dissolve even when the temperature reached 1200 C. Sucrose addition had virtually zero impact on both foaming and the dissolution of silica particles.

  15. Effects of Cu and Ag additions on age-hardening behavior during multi-step aging in Al--Mg--Si alloys

    International Nuclear Information System (INIS)

    Kim, JaeHwang; Daniel Marioara, Calin; Holmestad, Randi; Kobayashi, Equo; Sato, Tatsuo

    2013-01-01

    Low Cu and Ag additions (≤0.10 at%) were found to strongly affect the age-hardening behavior in Al--Mg--Si alloys with Mg+Si>1.5 at%. The hardness increased during aging at 170 °C and the formation of β ″ precipitates was kinetically accelerated. The activation energy of the formation of the β ″ phase was calculated to 127, 105, 108 and 99 KJmol −1 in the base, Cu-added, Ag-added and Cu--Ag-added alloys, respectively using the Kissinger method. The negative effect of two-step aging caused by the formation of Cluster (1) during natural aging was not overcome by the addition of microalloying elements. However, it was suppressed by the formation of Cluster (2) through a pre-aging at 100 °C. Quantitative analysis of the precipitate microstructure was performed using a transmission electron microscope equipped with a parallel electron energy loss spectrometer for the determination of specimen thickness. The formation of Cluster (2) was found to increase the number density of β ″ precipitates, whereas the formation of Cluster (1) decreased the number density and increased the needle length. The effects of low Cu and Ag additions in combination with multi-step aging are discussed based on microstructure observations and hardness and resistivity measurements.

  16. Reward-related behavioral paradigms for addiction research in the mouse: performance of common inbred strains.

    Directory of Open Access Journals (Sweden)

    Lauren Lederle

    2011-01-01

    behavior (food magazine head entries. Overall, these assays provide robust paradigms for future studies using the mouse to elucidate the neural, molecular and genetic factors underpinning reward-related behaviors relevant to addiction research.

  17. Reward-related behavioral paradigms for addiction research in the mouse: performance of common inbred strains.

    Science.gov (United States)

    Lederle, Lauren; Weber, Susanna; Wright, Tara; Feyder, Michael; Brigman, Jonathan L; Crombag, Hans S; Saksida, Lisa M; Bussey, Timothy J; Holmes, Andrew

    2011-01-10

    magazine head entries). Overall, these assays provide robust paradigms for future studies using the mouse to elucidate the neural, molecular and genetic factors underpinning reward-related behaviors relevant to addiction research.

  18. Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research.

    Science.gov (United States)

    Salamone, John D; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

    2018-01-01

    Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson's disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

  19. Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research

    Directory of Open Access Journals (Sweden)

    John D. Salamone

    2018-03-01

    Full Text Available Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson’s disease. Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

  20. Beyond Bullying: Consideration of Additional Research for the Assessment and Prevention of Potential Rampage School Violence in the United States

    Directory of Open Access Journals (Sweden)

    Evonn Welton

    2014-01-01

    Full Text Available For approximately 15 years there have been a number of episodes of rampage school violence in elementary/high school and higher education in the United States. Initial responses included implementation of antibullying programs, disciplinary measures, and increased law security measures. As the incidences have continued, it has become apparent that a more collaborative and interdisciplinary approach is needed for prevention. This paper offers a review of research literature as it applies to proposed innovative strategies for collaborative research, prevention, and intervention in the school setting.

  1. Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings

    Directory of Open Access Journals (Sweden)

    Kessler Julia

    2017-01-01

    Full Text Available This scientific survey is about periodic lattice structures which are made by Selective Laser Melting (SLM. Selective laser melting is based on Additive Manufacturing. The increased use and increasing demand of lattice structures in different fields of applications forms the necessity of a closer look on complex structures. Lattice structures can be found in different fields of applications for example in lightweight applications, filters and heat exchangers. Because of the expanding of application areas and thus arising requirements, the quality improvement is indispensable. Additive manufacturing and especially the SLM process enable the manufacturing of highly complex shapes and structures. Further it allows the integration of lightweight structures within to be manufactured applications. These high performance structures and applications need specific boundary and process conditions [1-3]. The main aim of this survey is an extraction of important parameters concerning the shape of lattices. A first focus will be on mechanical properties and the therefore necessary tensile tests.

  2. The effect of differentiated margin on futures market investors' behavior and structure An experimental research

    Institute of Scientific and Technical Information of China (English)

    Jin-hui Luo; Di-fang Wan; Yang Yang; Guang Yang

    2011-01-01

    Purpose-The purpose of this paper is to empirically analyze the role of differentiated margin system in leading investors' investing behavior and then optimize investor structure in futures markets.Design/methodology/approach-Using economic experimental research method,this paper designs and conducts a futures market experiment according to experimental research's basic norms,thus acquiring needed and credible empirical data.Findings-By analyzing the experimental data,it is found that compared with situations in futures markets that implement uniform margin system,investors' (especially speculators') futures open position and the ratio of their open position and futures turnover are both significantly higher,in futures markets that implement differentiated margin system.On the other hand,differentiated margin system has no effects on hedgers' futures turnover,but significantly reduces speculators' futures turnover.Research limitations/implications-The findings suggest that compared with uniform margin system,differentiated margin system is beneficial to effectively restrict both speculators' and hedgers' speculating behavior and lead hedgers' market participation.Practical implications-In order to resolve the problem of unreasonable investor structure in China's futures market,i.e.lack of hedgers and over-speculating China's futures market's regulators should reform the margin system and adopt differentiated margin system to lead investors' rational behavior and optimize investor structure.Originality/value-This paper empirically analyzes and verifies,for the first time,the roles of differentiated margin system in affecting investors' investing behavior.The futures market experiment designed and used in this study is a pioneering and exploratory experiment.

  3. Effect of the Heusler phase formation on the magnetic behavior of the Cu–10 wt.%Mn alloy with Al and Ag additions

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, T.M., E-mail: thaisa.mary@gmail.com [Instituto de Química – UNESP, Caixa Postal 355, 14801-970 Araraquara, SP (Brazil); Adorno, A.T.; Santos, C.M.A. [Instituto de Química – UNESP, Caixa Postal 355, 14801-970 Araraquara, SP (Brazil); Silva, R.A.G. [Departamento de Ciências Exatas e da Terra – UNIFESP, 09972-270 Diadema, SP (Brazil); Magnani, M. [Instituto de Química – UNESP, Caixa Postal 355, 14801-970 Araraquara, SP (Brazil)

    2015-09-15

    Highlights: • The presence of the Cu{sub 2}MnAl phase was observed in annealed alloys. • Al and Ag additions shift the equilibrium concentration to higher Al values. • There is a correlation between the Ag-rich phase and the Cu{sub 2}MnAl phase. - Abstract: In this work, the formation of the Cu{sub 2}AlMn Heusler phase and its influence on the magnetic behavior of the Cu–Mn–Al–Ag alloys in the range of 8–10 wt.% of aluminum and 2–4 wt.% of silver were studied using differential scanning calorimetry (DSC), transmission electron microscopy (TEM), high-resolution TEM (HRTEM) and saturation magnetization measurements at 4 K. The results showed that there is a correlation between the presence of the Ag-rich phase and the formation of the Cu{sub 2}MnAl phase.

  4. Healthy Variability in Organizational Behavior: Empirical Evidence and New Steps for Future Research.

    Science.gov (United States)

    Navarro, José; Rueff-Lopes, Rita

    2015-10-01

    The healthy variability thesis suggests that healthy systems function in a complex manner over time. This thesis is well-established in fields like physiology. In the field of organizational behavior, however, this relation is only starting to be explored. The objective of this article is threefold: First, we aim to provide a comprehensive review of the healthy variability thesis including some of the most important findings across different fields, with a focus on evidences from organizational research in work motivation and performance. Second, we discuss an opposite pattern, unhealthy stability, i.e., the relationship between unhealthy behaviors and lower variability. Again, we provide evidence from diverse areas, from affective processes to disruptive organizational comportments like mobbing. Third, we provide a critical evaluation of current methodological trends and highlight what we believe to be the main factors that are stopping organizational research from advancing in the field. Theoretical, methodological and epistemological implications are discussed. To conclude, we draw a compilation of the lessons learned, which hopefully provide insights for prolific research avenues. Our main purpose is to raise awareness of the healthy variability thesis and to enthuse organizational researchers to consider it in order to advance existing knowledge, revisit old theories and create new ones.

  5. MBC model analysis for predicting the rock behavior in excavating the Mizunami Underground Research Laboratory

    International Nuclear Information System (INIS)

    Mori, Takayuki; Iwano, Keita; Nakajima, Makoto; Morikawa, Seiji; Tabei, Kazuto

    2005-03-01

    As a Phase 1 of MIU project (Mizunami Underground Research Laboratory project), through the laboratory and borehole in-situ tests, JNC Tono Geoscience Center plans to constitute the comprehensive geological model and predicts the rock behaviors in excavating the shaft and gallery. These model and results leads to be reflected by the next step research projects. So far, the Phase 1 of MIU project is coming to final stage, and the Phase 2 will start at next year in which the in-situ researches are planned through the excavation. In this study, the comprehensive geometrical model was drawn out through the Phase 1 data, and MBC model analysis was carried out to predict the rock mass behavior around the shaft and gallery. The following results are obtained. 1. With MIZ-1 borehole core, artificial joints, which are assumed to be produced by rock blasting, were formed through the Brazilian test. And through the rock shear test for these joints, these mechanical properties were obtained. 2. By examining the MIZ-1 borehole research data, Mizunami site was classified by mechanical and joint properties and the Geomechanical model were made up. 3. Through the MBC model, the shaft and gallery cases were analyzed which depend on the rock mass classification, Excavation Damaged Zone, and the direction of the galleries. These results showed that in most cases, the joint opening were little because of the rock stiffness, but by the existence of high inclined joints, the side wall of the galleries were damaged by the excavation. (author)

  6. Fuzzy Analytic Hierarchy Process-based Chinese Resident Best Fitness Behavior Method Research.

    Science.gov (United States)

    Wang, Dapeng; Zhang, Lan

    2015-01-01

    With explosive development in Chinese economy and science and technology, people's pursuit of health becomes more and more intense, therefore Chinese resident sports fitness activities have been rapidly developed. However, different fitness events popularity degrees and effects on body energy consumption are different, so bases on this, the paper researches on fitness behaviors and gets Chinese residents sports fitness behaviors exercise guide, which provides guidance for propelling to national fitness plan's implementation and improving Chinese resident fitness scientization. The paper starts from the perspective of energy consumption, it mainly adopts experience method, determines Chinese resident favorite sports fitness event energy consumption through observing all kinds of fitness behaviors energy consumption, and applies fuzzy analytic hierarchy process to make evaluation on bicycle riding, shadowboxing practicing, swimming, rope skipping, jogging, running, aerobics these seven fitness events. By calculating fuzzy rate model's membership and comparing their sizes, it gets fitness behaviors that are more helpful for resident health, more effective and popular. Finally, it gets conclusions that swimming is a best exercise mode and its membership is the highest. Besides, the memberships of running, rope skipping and shadowboxing practicing are also relative higher. It should go in for bodybuilding by synthesizing above several kinds of fitness events according to different physical conditions; different living conditions so that can better achieve the purpose of fitness exercises.

  7. A synopsis of the Defense Advanced Research Projects Agency (DARPA) investment in additive manufacture and what challenges remain

    Science.gov (United States)

    Maher, Michael; Smith, Adrien; Margiotta, Jesse

    2014-03-01

    DARPA's interest in additive manufacture dates back to the mid-80s with seedling programs that developed the foundational knowledge and equipment that led to the Solid Freeform Fabrication program in 1990. The drivers for this program included reducing development times by enabling "tool-less" manufacturing as well as integration of design and fabrication tools. DARPA consistently pushed the boundaries of additive manufacture with follow-on programs that expanded the material suite available for 3-D printing as well as new processes that expanded the technology's capability base. Programs such as the Mesoscopic Integrated Conformal Electronics (MICE) program incorporated functionality to the manufacturing processes through direct write of electronics. DARPA's investment in additive manufacture continues to this day but the focus has changed. DARPA's early investments were focused on developing and demonstrating the technology's capabilities. Now that the technology has been demonstrated, there is serious interest in taking advantage of the attributes unique to the processing methodology (such as customization and new design possibilities) for producing production parts. Accordingly, today's investment at DARPA addresses the systematic barriers to implementation rather than the technology itself. The Open Manufacturing program is enabling rapid qualification of new technologies for the manufacturing environment through the development of new modeling and informatics tools. While the technology is becoming more mainstream, there are plenty of challenges that need to be addressed. And as the technology continues to mature, the agency will continue to look for those "DARPA-hard" challenges that enable revolutionary changes in capability and performance for the Department of Defense.

  8. Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization.

    Science.gov (United States)

    Banks, Jim

    2013-01-01

    Having already made a big impact in the medical sector, three-dimensional (3-D) printing technology continues to push the boundaries of cost efficiency, convenience, and customization. It has transformed some aspects of medical device production. However, expectations of the technology are often exaggerated in the media, so we spoke to leading researchers in the field about its practical applications and what can be expected in the near future.

  9. Research of the Behavior of Consumers in the Insurance Market in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Marešová Petra

    2012-06-01

    Full Text Available The purpose of this article is to familiarize with research aim, goal of which is to map out consumer behavior in the choice of insurance against death was carried out. This insured risk was chosen because for most insurers in the product offering as one of the key and it occurs within the highly competitive bid. At consumer behavior specification is also taken into account their classifying that can influence potential irrational behavior elements and help to clarify studied dilemma more (e.g. income brackets, age or other demographic information. Results will contribute to decision-making theory enrichment in given specific segment. From view of practice, they will be used in co-operative institution with the aim of a better client comprehension, product optimization and thereby contracts decline prevention and permanent clientele expansion.The results of the research project showed that most consumers under the influence of certain factors act irrationally. These factors include media coverage of the causes of claims discount, offer extension of insurance coverage.

  10. Experimental Research on Internal Behaviors of Caved Rocks under the Uniaxial Confined Compression

    Directory of Open Access Journals (Sweden)

    Yu-jiang Zhang

    2017-01-01

    Full Text Available As main composition of longwall gob, caved rocks’ behaviors and their impacts under compression crucially influence strata control, subsidence, associated resources extraction, and many other aspects. However, current researches are based on a whole sample, due to looseness of caved rocks and limitation of observation technology. In this paper, an experiment system was built to investigate internal behaviors of caved rocks’ sample, under the uniaxial confined compression, including movement and breakage behavior by the digital image processing technologies. The results show that the compression process of caved rocks could be divided into two stages by relative density. Boundary effect and changes of voids and contact pressure among caved rocks lead to different movement law in different position in sample’s interior. A stratification phenomenon of breakage was discovered, which presents breakage concentration in the middle of the sample. The nonlinear movement and shear dislocation induced by shifts among caved rocks are the reason of the breakage stratification phenomenon. This phenomenon would have an effect on the permeability and seepage research of similar medium.

  11. Engaging Nurses in Research for a Randomized Clinical Trial of a Behavioral Health Intervention

    Directory of Open Access Journals (Sweden)

    Lona Roll

    2013-01-01

    Full Text Available Nurse involvement in research is essential to the expansion of nursing science and improved care for patients. The research participation challenges encountered by nurses providing direct care (direct care nurses include balancing patient care demands with research, adjusting to fluctuating staff and patient volumes, working with interdisciplinary personnel, and feeling comfortable with their knowledge of the research process. The purpose of this paper is to describe efforts to engage nurses in research for the Stories and Music for Adolescent/Young Adult Resilience during Transplant (SMART study. SMART was an NIH-funded, multisite, randomized, behavioral clinical trial of a music therapy intervention for adolescents/young adults (AYA undergoing stem cell transplant for an oncology condition. The study was conducted at 8 sites by a large multidisciplinary team that included direct care nurses, advanced practice nurses, and nurse researchers, as well as board-certified music therapists, clinical research coordinators, and physicians. Efforts to include direct care nurses in the conduct of this study fostered mutual respect across disciplines in both academic and clinical settings.

  12. ANOVA IN MARKETING RESEARCH OF CONSUMER BEHAVIOR OF DIFFERENT CATEGORIES IN GEORGIAN MARKET

    Directory of Open Access Journals (Sweden)

    NUGZAR TODUA

    2015-03-01

    Full Text Available Consumer behavior research was conducted on bank services and (non-alcohol soft drinks. Based on four different currencies and ten services there are analyses made on bank clients’ distribution by bank services and currencies, percentage distribution by bank services, percentage distribution of bank services by currencies. Similar results are also received in case of ten soft drinks with their five characteristics: consumers quantities split by types of soft drinks and attributes; Attributes percentage split by types of soft drinks; Types of soft drinks percentage split by attributes. With usage of ANOVA, based on the marketing research outcomes it is concluded that bank clients’ total quantities i.e. populations’ unknown mean scores do not differ from each other. In the soft drinks research case consumers’ total quantities i.e. populations’ unknown mean scores vary by characteristics

  13. A Meta-Analytic Review of the Theories of Reasoned Action and Planned Behavior in Physical Activity: Predictive Validity and the Contribution of Additional Variables.

    Science.gov (United States)

    Hagger, Martin S.; Chatzisarantis, Nikos L. D.; Biddle, Stuart J. H.

    2002-01-01

    Examined relations between behavior, intentions, attitudes, subjective norms, perceived behavioral control, self-efficacy, and past behaviors using the Theories of Reasoned Action (TRA) and Planned Behavior (TPB) in physical activity. This quantitative integration of the physical activity literature supported the major relationships of the…

  14. An Exploratory Research on Deviant Behaviors of Problem Patrons in Taiwan’s Public Library

    Directory of Open Access Journals (Sweden)

    Chen Su-May Sheih

    2016-11-01

    Full Text Available Patrons of public libraries are more diverse and complex than those of other types of libraries, implying potentially more unexpected and difficult situations. Negative emotions such as frustration and anxiety are generated among librarians when they must handle problem patrons, an effort that may influence the work efficiency of librarians and their physical and mental health. This study conducted a semi-structured in-depth interview, using public service librarians in Taiwan as subjects, to explore the categories of problem patrons and their behavioral characteristics. According to the results, the behavioral characteristics of problem patrons can be divided into 6 categories: interfering with others, violating library regulations, influencing library works, improperly using resources and facilities, breaking laws, and exhibiting a psychological disorder as well as violating social norms. On the basis of the research results, this study offers suggestions for future reference when public libraries must handle problem patrons.

  15. Summary of Research Issues in Behavior and Performance in Isolated and Confined Extreme (ICE) Environments

    Science.gov (United States)

    Palinkas, Lawrence A.

    2000-01-01

    The papers presented in this section describe changes in behavior and performance in various isolated and confined extreme (ICE) environments, including Antarctic expeditions and research stations, space simulators and isolation chambers, and submarines. Each of these environments possesses characteristics that are in some way analogous to those found on long-duration space missions. Despite differences in length of mission, characteristics of mission personnel or crew, and characteristics in the physical environment, the various ICE environments described in this collection of papers appear to produce similar changes in behavior and performance. These changes include increased disturbances of mood, increased rates of psychiatric disorder, increased interpersonal tension, and a disruption of circadian rhythms. However, these environments do not inherently produce decrements in performance. Palinkas and colleagues suggest that prolonged exposure to the isolation and confinement in the Antarctic can actually have positive or "salutogenic" effects as well, evidenced by a decrease in mood disturbances and increase in performance measures.

  16. Simulation of foulant bioparticle topography based on Gaussian process and its implications for interface behavior research

    Science.gov (United States)

    Zhao, Leihong; Qu, Xiaolu; Lin, Hongjun; Yu, Genying; Liao, Bao-Qiang

    2018-03-01

    Simulation of randomly rough bioparticle surface is crucial to better understand and control interface behaviors and membrane fouling. Pursuing literature indicated a lack of effective method for simulating random rough bioparticle surface. In this study, a new method which combines Gaussian distribution, Fourier transform, spectrum method and coordinate transformation was proposed to simulate surface topography of foulant bioparticles in a membrane bioreactor (MBR). The natural surface of a foulant bioparticle was found to be irregular and randomly rough. The topography simulated by the new method was quite similar to that of real foulant bioparticles. Moreover, the simulated topography of foulant bioparticles was critically affected by parameters correlation length (l) and root mean square (σ). The new method proposed in this study shows notable superiority over the conventional methods for simulation of randomly rough foulant bioparticles. The ease, facility and fitness of the new method point towards potential applications in interface behaviors and membrane fouling research.

  17. The effect of Nb addition on mechanical properties, corrosion behavior, and metal-ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid.

    Science.gov (United States)

    Qiu, C L; Liu, L; Sun, M; Zhang, S M

    2005-12-15

    Bulk metallic glasses (BMGs) of Zr(65 - x)Nb(x)- Cu(17.5)Ni(10)Al(7.5) with Nb = 0, 2, and 5 at % were prepared by copper mold casting. Compression tests reveal that the two BMGs containing Nb exhibited superior strength and plasticity to the base alloy. The corrosion behavior of the alloys obtained was investigated in artificial body fluid by electrochemical measurements. It was found that the addition of Nb significantly enhanced the corrosion resistance of the Zr-based BMG, as indicated by a remarkable increase in corrosion potential and pitting potential. XPS analysis revealed that the passive film formed after anodic polarization was enriched in aluminum oxide and depleted in phosphate ions for the BMGs containing Nb, which accounts for the improvement of corrosion resistance. On the other hand, metal-ion release of different BMGs were determined in PPb (ng/mL) level with inductively coupled plasma mass spectrometry (ICP-MS) after being immersed in artificial body fluid at 37 degrees C for 20 days. It was found that the addition of Nb considerably reduced the ion release of all kinds of metals of the base system. This is probably attributed to the promoting effect of Nb on a rapid formation of highly protective film.

  18. Effect of Zinc Oxide Addition on Antibacterial Behavior of Hydroxyapatite-Poly lactic-co-glycolic acid Scaffold for Bone Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Narges Abotalebi

    2018-03-01

    Full Text Available Introduction: Infection after the surgery is one of the problems of bone scaffolds implants which is normally treated by systemic administration of antibiotics. But due to the poor blood circulation in bone tissue, large antibiotic doses are needed which lead to further drawbacks to renal and hepatic systems. Material and method: In this study, the effect of zinc oxide addition on antibacterial behavior of hydroxyapatite- Poly lactic-co-glycolic acid scaffold was evaluated. The synthesized composite was characterized by X-ray diffraction, scanning electron microscopy equipped with elemental analysis and Fourier transform infrared spectra. In order to determine the antibacterial activity of the fabricated scaffold, Staphylococcus aureus (ATTC 25922 and Escherichia coli (ATTC 25923 were used as test microorganisms. Results: The results showed that Hydroxyapatite- Poly lactic-co-glycolic acid scaffold did not make inhibition zone in culture medium but the modification of Hydroxyapatite- Poly lactic-co-glycolic acid scaffold’s surface by zinc oxide particles caused Hydroxyapatite- Poly lactic-co-glycolic acid- zinc oxide scaffold to have antibacterial inhibition zone of 12 and 20 mm for Escherichia coli and Staphylococcus aureus, respectively. Discussion and conclusion: This study revealed that the addition of antibacterial agent to applicable bone tissue engineering scaffolds could be considered as an appropriate way to prevent the growth of infection at the scaffold site.

  19. Rheological behavior of clay-nanoparticle hybrid-added bentonite suspensions: specific role of hybrid additives on the gelation of clay-based fluids.

    Science.gov (United States)

    Jung, Youngsoo; Son, You-Hwan; Lee, Jung-Kun; Phuoc, Tran X; Soong, Yee; Chyu, Minking K

    2011-09-01

    Two different types of clay nanoparticle hybrid, iron oxide nanoparticle clay hybrid (ICH) and Al(2)O(3)-SiO(2) nanoparticle clay hybrid (ASCH), were synthesized and their effects on the rheological properties of aqueous bentonite fluids in steady state and dynamic state were explored. When ICH particles were added, bentonite particles in the fluid cross-link to form relatively well-oriented porous structure. This is attributed to the development of positively charged edge surfaces in ICH that leads to strengthening of the gel structure of the bentonite susensions. The role of ASCH particles on the interparticle association of the bentonite fluids is different from that of ICH and sensitive to pH. As pH of ASCH-added bentonite suspensions increased, the viscosity, yield stress, storage modulus, and flow stress decreased. In contrast, at low pH, the clay suspensions containing ASCH additives were coagulated and their rheological properties become close to those of ICH added bentonite fluids. A correlation between the net surface charge of the hybrid additives and the rheological properties of the fluids indicates that the embedded nanoparticles within the interlayer space control the variable charge of the edge surfaces of the platelets and determine the particles association behavior of the clay fluids.

  20. A comparison of methods for the analysis of binomial clustered outcomes in behavioral research.

    Science.gov (United States)

    Ferrari, Alberto; Comelli, Mario

    2016-12-01

    In behavioral research, data consisting of a per-subject proportion of "successes" and "failures" over a finite number of trials often arise. This clustered binary data are usually non-normally distributed, which can distort inference if the usual general linear model is applied and sample size is small. A number of more advanced methods is available, but they are often technically challenging and a comparative assessment of their performances in behavioral setups has not been performed. We studied the performances of some methods applicable to the analysis of proportions; namely linear regression, Poisson regression, beta-binomial regression and Generalized Linear Mixed Models (GLMMs). We report on a simulation study evaluating power and Type I error rate of these models in hypothetical scenarios met by behavioral researchers; plus, we describe results from the application of these methods on data from real experiments. Our results show that, while GLMMs are powerful instruments for the analysis of clustered binary outcomes, beta-binomial regression can outperform them in a range of scenarios. Linear regression gave results consistent with the nominal level of significance, but was overall less powerful. Poisson regression, instead, mostly led to anticonservative inference. GLMMs and beta-binomial regression are generally more powerful than linear regression; yet linear regression is robust to model misspecification in some conditions, whereas Poisson regression suffers heavily from violations of the assumptions when used to model proportion data. We conclude providing directions to behavioral scientists dealing with clustered binary data and small sample sizes. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Influence of Ti addition and sintering method on microstructure and mechanical behavior of a medium-entropy Al0.6CoNiFe alloy

    International Nuclear Information System (INIS)

    Fu, Zhiqiang; Chen, Weiping; Chen, Zhen; Wen, Haiming; Lavernia, Enrique J.

    2014-01-01

    The influence of Ti addition and sintering method on the microstructure and mechanical behavior of a medium-entropy alloy, Al 0.6 CoNiFe alloy, was studied in detail. Alloying behavior, microstructure, phase evolution and mechanical properties of Al 0.6 CoNiFe and Ti 0.4 Al 0.6 CoNiFe alloys were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), as well as by mechanical testing. During the mechanical alloying (MA) process, a supersaturated solid solution consisting of both BCC and FCC phases was formed in the Al 0.6 CoNiFe alloy. With Ti addition, the Ti 0.4 Al 0.6 CoNiFe alloy exhibited a supersaturated solid solution with a single FCC phase. Following hot pressing (HP), the HP sintered (HP’ed) Al 0.6 CoNiFe bulk alloy was composed of a major BCC phase and a minor FCC phase. The HP’ed Ti 0.4 Al 0.6 CoNiFe alloy exhibited a FCC phase, two BCC phases and a trace unidentified phase. Nanoscale twins were present in the HP’ed Ti 0.4 Al 0.6 CoNiFe alloy, where deformation twins were observed in the FCC phase. Our results suggest that the addition of Ti facilitated the formation of nanoscale twins. The compressive strength and Vickers hardness of HP’ed Ti 0.4 Al 0.6 CoNiFe alloy were slightly lower than the corresponding values of the HP’ed Al 0.6 CoNiFe alloy. In contrast with HP’ed Al 0.6 CoNiFe alloy, spark plasma sintered (SPS’ed) Al 0.6 CoNiFe alloy exhibited a major FCC phase and a minor BCC phase. Moreover, the SPS’ed Al 0.6 CoNiFe alloy exhibited a lower compressive strength and Vickers hardness, but singificantly higher plasticity, as compared to those of the HP’ed counterpart material

  2. Information-seeking behavior of basic science researchers: implications for library services.

    Science.gov (United States)

    Haines, Laura L; Light, Jeanene; O'Malley, Donna; Delwiche, Frances A

    2010-01-01

    This study examined the information-seeking behaviors of basic science researchers to inform the development of customized library services. A qualitative study using semi-structured interviews was conducted on a sample of basic science researchers employed at a university medical school. The basic science researchers used a variety of information resources ranging from popular Internet search engines to highly technical databases. They generally relied on basic keyword searching, using the simplest interface of a database or search engine. They were highly collegial, interacting primarily with coworkers in their laboratories and colleagues employed at other institutions. They made little use of traditional library services and instead performed many traditional library functions internally. Although the basic science researchers expressed a positive attitude toward the library, they did not view its resources or services as integral to their work. To maximize their use by researchers, library resources must be accessible via departmental websites. Use of library services may be increased by cultivating relationships with key departmental administrative personnel. Despite their self-sufficiency, subjects expressed a desire for centralized information about ongoing research on campus and shared resources, suggesting a role for the library in creating and managing an institutional repository.

  3. Behaviorism

    Science.gov (United States)

    Moore, J.

    2011-01-01

    Early forms of psychology assumed that mental life was the appropriate subject matter for psychology, and introspection was an appropriate method to engage that subject matter. In 1913, John B. Watson proposed an alternative: classical S-R behaviorism. According to Watson, behavior was a subject matter in its own right, to be studied by the…

  4. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, B.W.; Wilkinson, M.J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium environmental data for use in risk assessments and the status of research programs being conducted by various organizations related to the behavior of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments. 19 refs., 2 figs., 1 tab

  5. The current state of research in the field of reproductive behavior of spouses’ regulation

    Directory of Open Access Journals (Sweden)

    Maria M. Danina

    2016-06-01

    Full Text Available The article provides an overview of the socio-demographic, socio-economic and psychological approaches to the study of reproductive behavior of spouses carried out over the last 30 years. Two categories of concepts that explain the determination of decisions on childbearing are regarded: rational-pragmatic and hedonistic. The trends in the development of this field of knowledge are as follows: 1 overcoming economical-oriented logic in explaining the factors and determinants of the decision making process; 2 individual psychological factors study in addition to the traditional socio-psychological analysis of the determination of childbirth; 3 the transition from studying the context of decisions about childbirth to the analysis of their role and place in the context of the person biography. The analysis of the concepts and empirical studies helps not only to reveal a massive shift of professional interest from economic and demographic factors to psychological ones, but also to have a better understanding of socio-cultural and psychological and value determined roots of that shift. Nowadays, in contrast to biological patterns and established traditions, a personal or family decision about bearing a child is becoming more and more conscious. Particular attention is paid to the concept of mental regulation of reproductive behavior that is developed at the intersection of psychology of reproductive behavior, psychology of parenthood and individual psychology. The supportive argument is that new objects of study are considered, such as voluntarily childless families, parents at risk, same-sex families.

  6. Tropical Tropospheric Ozone from SHADOZ (Southern Hemisphere ADditional Ozonesondes) Network: A Project for Satellite Research, Process Studies, Education

    Science.gov (United States)

    Thompson, Anne M.; Witte, Jacquelyn C.; Oltmans, Samuel J.; Schmidlin, Francis J.; Coetzee, G. J. R.; Hoegger, Bruno; Kirchhoff, V. W. J. H.; Ogawa, Toshihiro; Kawakami, Shuji; Posny, Francoise

    2002-01-01

    The first climatological overview of total, stratospheric and tropospheric ozone in the southern hemisphere tropical and subtropics is based on ozone sounding data from 10 sites comprising the Southern Hemisphere Additional OZonesondes (SHADOZ) network. The period covered is 1998-2000. Observations were made over: Ascension Island; Nairobi, Kenya; Irene, South Africa; Reunion Island; Watukosek, Java; Fiji; Tahiti; American Samoa; San Cristobal, Galapagos; Natal, Brazil. Campaign data were collected on a trans-Atlantic oceanographic cruise and during SAFARI-2000 in Zambia. The ozone data, with simultaneous temperature profiles to approx. 7 hPa and relative humidity to approx. 200 hPa, reside at: . SHADOZ ozone time-series and profiles give a perspective on tropical total, stratospheric and tropospheric ozone. Prominent features are highly variable tropospheric ozone and a zonal wave-one pattern in total (and tropospheric) column ozone. Total, stratospheric and tropospheric column ozone amounts peak between August and November and are lowest between March and May. Tropospheric ozone variability over the Indian and Pacific Ocean displays influences of the Indian Ocean Dipole and convective mixing. Pollution transport from Africa and South America is a seasonal feature. Tropospheric ozone seasonality over the Atlantic Basin shows effects of regional subsidence and recirculation as well as biomass burning. Dynamical and chemical influences appear to be of comparable magnitude though model studies are needed to quantify this.

  7. A Theory of Planned Behavior Research Model for Predicting the Sleep Intentions and Behaviors of Undergraduate College Students

    Science.gov (United States)

    Knowlden, Adam P.; Sharma, Manoj; Bernard, Amy L.

    2012-01-01

    The purpose of this study was to operationalize the constructs of the Theory of Planned Behavior (TPB) to predict the sleep intentions and behaviors of undergraduate college students attending a Midwestern University. Data collection spanned three phases. The first phase included a semi-structured qualitative interview (n = 11), readability by…

  8. Behavioral Criteria in Research and the Study of Racism: Performing the Jackal Function. Part I.

    Science.gov (United States)

    1979-01-01

    Legrande Clegg Attorney at Law /Historian Los Angeles, Ca. Price Cobbs, M.D. Director, Pacific Management Systems, San Francisco, Ca. John Collier...Angeles, Ca. Joseph T. Klapper, Ph.D. C. B. S. Social Research I ill Charles Lawrence, J.D. College of Law , University of San Francisco, Ca. Lee C. Lee...beliefs of the people who use it. 7. S. Szasz 70" CHAPTER IV The Historical Background and Theoretical Model for the Study of Racist Belief-Behavior and

  9. Multi-scale analysis of deformation behavior at SCC crack tip (3) (Contract research)

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Miwa, Yukio; Tsukada, Takashi; Hayakawa, Masao; Nagashima, Nobuo

    2008-08-01

    In recent years, incidents of the stress corrosion cracking (SCC) were frequently reported that occurred to the various components of domestic boiling water reactors (BWR), and the cause investigation and measure become the present important issue. By the Japan nuclear energy safety organization (JNES), a research project on the intergranular SCC (IGSCC) in nuclear grade stainless steels (henceforth, IGSCC project) is under enforcement from a point of view to secure safety and reliability of BWR, and SCC growth data of low carbon stainless steels are being accumulated for the weld part or the work-hardened region adjacent to the weld metal. In the project, it has been an important subject to guarantee the validity of accumulated SCC data. At a crack tip of SCC in compact tension (CT) type specimen used for the SCC propagation test, a macroscopic plastic region is formed where heterogeneity of microstructure developed by microscopic sliding and dislocations is observed. However, there is little quantitative information on the plastic region, and therefore, to assess the data of macroscopic SCC growth rate and the validity of propagation test method, it is essentially required to investigate the plastic region at the crack tip in detail from a microscopic viewpoint. This report describes a result of the research conducted by the Japan Atomic Energy Agency and the National Institute for Materials Science under contract with JNES that was concerned with a multi-scale analysis of plastic deformation behavior at the crack tip of SCC. The research was carried out to evaluate the validity of the SCC growth data acquired in the IGSCC project based on a mechanistic understanding of SCC. For the purpose, in this research, analyses of the plastic deformation behavior and microstructure around the crack tip were performed in a nano-order scale. The hardness measured in nano, meso and macro scales was employed as a common index of the strength, and the essential data necessary

  10. Research on Power Producer’s Bidding Behavior Based on the Best-Response Dynamic Model

    Directory of Open Access Journals (Sweden)

    Jingqi Sun

    2014-01-01

    Full Text Available As China’s electricity market is facing many problems, the research on power producer’s bidding behavior can promote the healthy and sustainable development of China’s electricity market. As a special commodity, the “electricity” possesses complicated production process. The instable market constraint condition, nonsymmetric information, and a lot of random factors make the producer’s bidding process more complex. Best-response dynamic is one of the classic dynamic mechanisms of the evolutionary game theory, which applies well in the repeated game and strategy evolution that happen among a few bounded rational players with a quick learning capability. The best-response dynamic mechanism is employed to study the power producer’s bidding behavior in this paper, the producer’s best-response dynamic model is constructed, and how the producers would engage in bidding is analyzed in detail. Taking two generating units in South China regional electricity market as the example, the producer’s bidding behavior by following the producer’s best-response dynamic model is verified. The relationships between the evolutionarily stable strategy (ESS of power producer’s bidding and the market demand, and ceiling and floor price as well as biding frequency are discussed in detail.

  11. Social networking and young adults' drinking practices: innovative qualitative methods for health behavior research.

    Science.gov (United States)

    Lyons, Antonia C; Goodwin, Ian; McCreanor, Tim; Griffin, Christine

    2015-04-01

    Understandings of health behaviors can be enriched by using innovative qualitative research designs. We illustrate this with a project that used multiple qualitative methods to explore the confluence of young adults' drinking behaviors and social networking practices in Aotearoa, New Zealand. Participants were 18-25 year old males and females from diverse ethnic, class, and occupational backgrounds. In Stage 1, 34 friendship focus group discussions were video-recorded with 141 young adults who talked about their drinking and social networking practices. In Stage 2, 23 individual interviews were conducted using screen-capture software and video to record participants showing and discussing their Facebook pages. In Stage 3, a database of Web-based material regarding drinking and alcohol was developed and analyzed. In friendship group data, young adults co-constructed accounts of drinking practices and networking about drinking via Facebook as intensely social and pleasurable. However, this pleasure was less prominent in individual interviews, where there was greater explication of unpleasant or problematic experiences and practices. The pleasure derived from drinking and social networking practices was also differentiated by ethnicity, gender, and social class. Juxtaposing the Web-based data with participants' talk about their drinking and social media use showed the deep penetration of online alcohol marketing into young people's social worlds. Multiple qualitative methods, generating multimodal datasets, allowed valuable nuanced insights into young adults' drinking practices and social networking behaviors. This knowledge can usefully inform health policy, health promotion strategies, and targeted health interventions. (c) 2015 APA, all rights reserved).

  12. The prime questions in authentic patient's consultations: a call for additional research on current and new paradigms.

    Science.gov (United States)

    Nguyen, Hanh Thi

    2013-01-01

    Although the 3 prime questions ("What did your doctor tell you the medication is for?" "How did your doctor tell you to take the medication?," and "What did your doctor tell you to expect?") have been recommended as a way to implement an interactive approach to patient's counseling in pharmacy, research examining how these questions are actually used in practice is relatively sparse. Qualitative approaches might assist to inform pertinent questions that might challenge prevailing paradigms. This commentary calls for a close look at how novice pharmacists in training manage these questions in real-life patient's consultations. These examples are aimed to provide preliminary observations about (1) how the prime questions in their original and modified forms are treated by pharmacists in training and patients, and (2) the interactional functions that the prime questions and similar questions may serve. Preliminary observations based on a conversation analysis of these examples show that the open-ended nature of the original prime questions sometimes leads to interactional problems such as delays in patients' responses and pharmacists' revision of the questions. Modified question formats that involve the use of specific knowledge expected to be possessed by a pharmacist, such as declarative questions and Q-word questions with concrete information, may lead to smoother interaction. Finally, questions about the purpose of the therapy may also be used to create opportunities to express empathy toward the patient or to shift the zone of expertise to the doctor. These initial findings suggest a more context sensitive and adaptive approach to communication in pharmacy. Copyright © 2013 Elsevier Inc. All rights reserved.

  13. ["Grounded theory" develops medicine. Popular research method for exploring human behavior can discover new connections].

    Science.gov (United States)

    Thulesius, Hans; Barfod, Toke; Ekström, Helene; Håkansson, Anders

    2004-09-30

    Grounded theory (GT) is a popular research method for exploring human behavior. GT was developed by the medical sociologists Glaser and Strauss while they studied dying in hospitals in the 1960s resulting in the book "Awareness of dying". The goal of a GT is to generate conceptual theories by using all types of data but without applying existing theories and hypotheses. GT procedures are mostly inductive as opposed to deductive research where hypotheses are tested. A good GT has a core variable that is a central concept connected to many other concepts explaining the main action in the studied area. A core variable answers the question "What's going on?". Examples of core variables are: "Cutting back after a heart attack"--how people adapt to life after a serious illness; and "Balancing in palliative cancer care"--a process of weighing, shifting, compensating and compromising when treating people with a progressive and incurable illness trajectory.

  14. Online Social Networking, Sexual Risk and Protective Behaviors: Considerations for Clinicians and Researchers.

    Science.gov (United States)

    Holloway, Ian W; Dunlap, Shannon; Del Pino, Homero E; Hermanstyne, Keith; Pulsipher, Craig; Landovitz, Raphael J

    2014-09-01

    Online social networking refers to the use of internet-based technologies that facilitate connection and communication between users. These platforms may be accessed via computer or mobile device (e.g., tablet, smartphone); communication between users may include linking of profiles, posting of text, photo and video content, instant messaging and email. This review provides an overview of recent research on the relationship between online social networking and sexual risk and protective behaviors with a focus on use of social networking sites (SNS) among young people and populations at high risk for sexually transmitted infections (STIs). While findings are mixed, the widespread use of SNS for sexual communication and partner seeking presents opportunities for the delivery and evaluation of public health interventions. Results of SNS-based interventions to reduce sexual risk are synthesized in order to offer hands-on advice for clinicians and researchers interested in engaging patients and study participants via online social networking.

  15. Research on curing behavior of concrete with anti-frost admixtures at subzero temperature

    Science.gov (United States)

    Ionov, Yulian; Kramar, Ludmila; Kirsanova, Alena; Kolegova, Irina

    2017-01-01

    The purpose of this paper is research on curing behavior of cold-weather concrete with anti-frost admixtures. During the study derivative thermal and X-ray phase analyses were performed and tests were carried out according to the standard GOST technique. The research results obtained reveal the peculiarities of cement hydration and concrete curing at subzero temperatures. The influence of subzero temperatures and anti-frost admixtures on hydrated phases of hardened cement paste and concrete strength formation was studied. It is found that cold-weather concrete does not cure at subzero temperatures, but when defrosting it attains 80 to 85% of its grade strength by the 28th day. Concrete achieves its grade strength when curing in normal conditions in 60 days only. Freezing concrete with anti-frost admixtures results in increase of calcium hydroxide content in hardened cement paste immediately when produced and has increased tendency of concrete to carbonation.

  16. A Research about Attitudes and Behaviors of University Students with Having Different Cultures towards the Environment through Sustainable Development

    Science.gov (United States)

    Gündüz, Serife

    2017-01-01

    The aim of this research is to determine the environmental attitudes and behaviors of the university students with different cultures. This research was prepared in accordance with survey model. The population of the research is composed of 300 university students with different cultures studying at Near East University in 2015-2016 academic…

  17. Clinical research on radioiodine addition of low-doses of lithium carbonate in short-term treatment of Graves hyperthyroidism

    International Nuclear Information System (INIS)

    Zha Jinshun; Jiang Yan; Xu Yuan; Lin Qinxiu; Huang Chunling; Jiang Tingyin

    2014-01-01

    after therapy (t fT3 =5.23, t fT4 =10.14 in group Ⅰ, t fT3 =5.12, t fT4 =9.98 in group Ⅱ, all P<0.01), then decreased gradually to the normal ranges. The fT 3 and fT 4 values in group Ⅱ were much lower than those in group Ⅰ (t fT3 =8.22, t fT4 =19.18, all P<0.01) 30 days after therapy, no significance were found in other time periods. Cure rate of hyperthyroidism was achieved in 36 of the 50 patients (72%) in group Ⅰ and in 38 of the 50 patients (76%) in group Ⅱ without significant difference. There were no significant differences in curative effect of the two groups (χ 2 =0.21, P>0.05). Conclusion: For patients withdrawing of ATD and those with short effective half-time, as well as those intolerant or invalid, the short term addition of lithium to 131 I allows for a better control of thyrotoxia and the completeness of treatment. But there have not been observed that lithium carbonate plus 131 I can improve the long term cure rate of Graves hyperthyroidism. (authors)

  18. The ABCs of incentive-based treatment in health care: a behavior analytic framework to inform research and practice

    Directory of Open Access Journals (Sweden)

    Meredith SE

    2014-03-01

    Full Text Available Steven E Meredith,1 Brantley P Jarvis,2 Bethany R Raiff,3 Alana M Rojewski,2 Allison Kurti,2 Rachel N Cassidy,2 Philip Erb,2 Jolene R Sy,4 Jesse Dallery2 1Department of Psychiatry and Behavioral Sciences, The Johns Hopkins University School of Medicine, Baltimore, MD, USA; 2Department of Psychology, University of Florida, Gainesville, FL, USA; 3Department of Psychology, Rowan University, Glassboro, NJ, USA; 4Saint Louis University School of Social Work, St Louis, MO, USA Abstract: Behavior plays an important role in health promotion. Exercise, smoking cessation, medication adherence, and other healthy behavior can help prevent, or even treat, some diseases. Consequently, interventions that promote healthy behavior have become increasingly common in health care settings. Many of these interventions award incentives contingent upon preventive health-related behavior. Incentive-based interventions vary considerably along several dimensions, including who is targeted in the intervention, which behavior is targeted, and what type of incentive is used. More research on the quantitative and qualitative features of many of these variables is still needed to inform treatment. However, extensive literature on basic and applied behavior analytic research is currently available to help guide the study and practice of incentive-based treatment in health care. In this integrated review, we discuss how behavior analytic research and theory can help treatment providers design and implement incentive-based interventions that promote healthy behavior. Keywords: incentives, contingency management, conditional cash transfer, pay-for-performance, wellness

  19. Effect of water addition to a total mixed ration on feed temperature, feed intake, sorting behavior, and milk production of dairy cows.

    Science.gov (United States)

    Felton, C A; DeVries, T J

    2010-06-01

    The objective of this study was to determine the effects of water addition to a high-moisture total mixed ration (TMR) on feed temperature, feed intake, feed sorting behavior, and milk production of dairy cows. Twelve lactating Holstein cows (155.8+/-60.1 DIM), individually fed once daily at 1000 h, were exposed to 3 diets in a Latin square design with 28-d treatment periods. Diets had the same ingredient composition [30.9% corn silage, 30.3% alfalfa haylage, 21.2% high-moisture corn, and 17.6% protein supplement; dry matter (DM) basis] and differed only in DM concentration, which was reduced by the addition of water. Treatment diets averaged 56.3, 50.8, and 44.1% DM. The study was conducted between May and August when environmental temperature was 18.2+/-3.6 degrees C and ambient temperature in the barn was 24.4+/-3.3 degrees C. Dry matter intake (DMI) was monitored for each animal for the last 14 d of each treatment period. For the final 7 d of each period, milk production was monitored, feed temperature and ambient temperature and humidity were recorded (daily at 1000, 1300, and 1600 h), and fresh feed and orts were sampled for determination of sorting. For the final 4 d of each period, milk samples were taken for composition analysis. Samples taken for determining sorting were separated using a Penn State Particle Separator that had 3 screens (19, 8, and 1.18 mm) and a bottom pan, resulting in 4 fractions (long, medium, short, and fine). Sorting was calculated as the actual intake of each particle size fraction expressed as a percentage of the predicted intake of that fraction. Greater amounts of water added to the TMR resulted in greater increases in feed temperature in the hours after feed delivery, greater sorting against long particles, and decreased DMI, reducing the overall intake of starch and neutral detergent fiber. Milk production and composition were not affected by the addition of water to the TMR. Efficiency of production of milk was, however

  20. Advancing the Science of Behavioral Self-Management of Chronic Disease: The Arc of a Research Trajectory

    Science.gov (United States)

    Allegrante, John P.

    2018-01-01

    This article describes advances in the behavioral self-management of chronic disease from the perspective of a 25-year trajectory of National Institute of Health-funded research in arthritis and cardiopulmonary diseases that has sought to develop a transdisciplinary understanding of how applied behavioral science can be used to improve health…

  1. Does It Matter Who Participates in Our Studies?: A Caution when Interpreting the Research on Positive Behavioral Support

    Science.gov (United States)

    Durand, V. Mark; Rost, Nichole

    2005-01-01

    Research on the treatment of challenging behaviors such as aggression, tantrums, and self-injury expanded significantly over the past two decades. However, despite of the rather impressive numbers of studies, it is still uncertain whether positive behavioral support (PBS) is effective with everyone. To be able to tell family members and…

  2. The research of Proactive Coping Behavior of Patients with Chronic Non-Specific Lung Disease

    Directory of Open Access Journals (Sweden)

    Marija A. Yaroslavskaya

    2011-01-01

    Full Text Available The purpose of the research was to study the patterns of using proactive coping and adherences to it's different types in patients with chronic non-specifi c lung diseases. Participants of the study (N=180 were 30 to 60 years old. The Proactive Coping Inventory was used to assess the patients' psychological status. According to the results of the study patients with chronic non-specifi c lung diseases use dif-ferent types of proactive coping behavior while solving problematic and stressful situations. The research revealed that patients with bronchial asthma don't have the skills of independent decision making, definition of objectives, considering of options in solving conflicts or other inconvenient situations sufficiently developed. Patients with chronic obstructive pulmonary disease are less satisfied with the emotional support that they receive from their relatives and closest people, it's harder for them to reveal their feelings and emotions than for those who suffer from bronchial asthma and healthy ones. The results of the study may be useful in developing educational systems of proactive coping behavior skills for patients with chronic non-specific lung diseases for their health and well-being support.

  3. Addiction treatment outcomes, process and change: Texas Institute of Behavioral Research at Texas Christian University.

    Science.gov (United States)

    Simpson, D Dwayne; Joe, George W; Dansereau, Donald F; Flynn, Patrick M

    2011-10-01

    For more than 40 years the Texas Institute of Behavioral Research (IBR) has given special attention to assessment and evaluation of drug user populations, addiction treatment services and various cognitive and behavioral interventions. Emphasis has been on studies in real-world settings and the use of multivariate methodologies to address evaluation issues within the context of longitudinal natural designs. Historically, its program of addiction treatment research may be divided into three sequential epochs-the first era dealt mainly with client assessment and its role in treatment outcome and evaluation (1969-89), the second focused upon modeling the treatment process and the importance of conceptual frameworks (1989-2009) in explaining the relationships among treatment environment, client attributes, treatment process and outcome, and the third (and current) era has expanded into studying tactical deployment of innovations and implementation. Recent projects focus upon adapting and implementing innovations for improving early engagement in adolescent residential treatment settings and drug-dependent criminal justice populations. Related issues include the spread of human immunodeficiency virus/acquired immune deficiency syndrome and other infectious diseases, organizational and systems functioning, treatment costs and process related to implementation of evidence-based practices. © 2010 The Authors, Addiction © 2010 Society for the Study of Addiction.

  4. Addiction treatment outcomes, process, and change: Texas Institute of Behavioral Research at TCU

    Science.gov (United States)

    Simpson, D. Dwayne; Joe, George W.; Dansereau, Donald F.; Flynn, Patrick M.

    2010-01-01

    For over 40 years the Texas Institute of Behavioral Research (IBR) has given special attention to assessment and evaluation of drug user populations, addiction treatment services, and various cognitive and behavioral interventions. Emphasis has been on studies in real-world settings and the use of multivariate methodologies to address evaluation issues within the context of longitudinal natural designs. Historically, its program of addiction treatment research may be divided into three sequential epochs – the first era dealt mainly with client assessment and its role in treatment outcome and evaluation (1969-1989), the second focused on modeling the treatment process and the importance of conceptual frameworks (1989-2009) in explaining the relationships among treatment environment, client attributes, treatment process, and outcome, and the third (and current) era has expanded into studying tactical deployment of innovations and implementation. Recent projects focus on adapting and implementing innovations for improving early engagement in adolescent residential treatment settings and drug-dependent criminal justice populations. Related issues include the spread of HIV/AIDS and other infectious diseases, organizational and systems functioning, treatment costs, and process related to implementation of evidence-based practices. PMID:20840168

  5. Maternal fat-soluble vitamins, brain development, and regulation of feeding behavior: an overview of research.

    Science.gov (United States)

    Sánchez-Hernández, Diana; Anderson, G Harvey; Poon, Abraham N; Pannia, Emanuela; Cho, Clara E; Huot, Pedro S P; Kubant, Ruslan

    2016-10-01

    Recent research shows a link between vitamin intake during pregnancy and offspring health. Inadequate intakes of water-soluble vitamins during pregnancy lead to obesity and characteristics of the metabolic syndrome, concurrent with altered developments in food intake regulatory pathways. Few studies, however, have reported on the effects of fat-soluble vitamins (A, D, E, and K) on the development of food intake regulatory pathways. The majority of studies to date have focused on associations between inadequate and high intakes of folic acid and vitamin D and neurocognitive development of the offspring. Hence, the objective of this review is to present an evaluation of the role of maternal vitamins A, D, E, and K in brain development and function of neural pathways that regulate feeding behaviors. PubMed and Google Scholar were searched from 1975 through September, 2016. Most studies supporting a role for fat-soluble vitamins in regulating brain development and associated behaviors have been conducted in animal and cell models, leaving uncertain their relevance to neurocognitive development and function in humans. Nevertheless, although current research on defining the role of maternal fat-soluble vitamins in offspring's brain development is limited, it is sufficient to warrant further investigations on their impact when intake amounts during pregnancy are not only inadequate but also exceed requirements. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. Non-surface activity and micellization behavior of cationic amphiphilic block copolymer synthesized by reversible addition-fragmentation chain transfer process.

    Science.gov (United States)

    Ghosh, Arjun; Yusa, Shin-ichi; Matsuoka, Hideki; Saruwatari, Yoshiyuki

    2011-08-02

    Cationic amphiphilic diblock copolymers of poly(n-butylacrylate)-b-poly(3-(methacryloylamino)propyl)trimethylammonium chloride) (PBA-b-PMAPTAC) with various hydrophobic and hydrophilic chain lengths were synthesized by a reversible addition-fragmentation chain transfer (RAFT) process. Their molecular characteristics such as surface activity/nonactivity were investigated by surface tension measurements and foam formation observation. Their micelle formation behavior and micelle structure were investigated by fluorescence probe technique, static and dynamic light scattering (SLS and DLS), etc., as a function of hydrophilic and hydrophobic chain lengths. The block copolymers were found to be non-surface active because the surface tension of the aqueous solutions did not change with increasing polymer concentration. Critical micelle concentration (cmc) of the polymers could be determined by fluorescence and SLS measurements, which means that these polymers form micelles in bulk solution, although they were non-surface active. Above the cmc, the large blue shift of the emission maximum of N-phenyl-1-naphthylamine (NPN) probe and the low micropolarity value of the pyrene probe in polymer solution indicate the core of the micelle is nonpolar in nature. Also, the high value of the relative intensity of the NPN probe and the fluorescence anisotropy of the 1,6-diphenyl-1,3,5-hexatriene (DPH) probe indicated that the core of the micelle is highly viscous in nature. DLS was used to measure the average hydrodynamic radii and size distribution of the copolymer micelles. The copolymer with the longest PBA block had the poorest water solubility and consequently formed micelles with larger size while having a lower cmc. The "non-surface activity" was confirmed for cationic amphiphilic diblock copolymers in addition to anionic ones studied previously, indicating the universality of non-surface activity nature.

  7. Effect of silver and indium addition on mechanical properties and indentation creep behavior of rapidly solidified Bi–Sn based lead-free solder alloys

    International Nuclear Information System (INIS)

    Shalaby, Rizk Mostafa

    2013-01-01

    Mechanical properties and indentation creep of the melt-spun process Bi–42 wt%Sn, Bi–40 wt%Sn–2 wt%In, Bi–40 wt%Sn–2 wt%Ag and Bi–38 wt%Sn–2 wt%In–2 wt%Ag were studied by dynamic resonance technique and Vickers indentation testing at room temperature and compared to that of the traditional Sn–37 wt%Pb eutectic alloy. The results show that the structure of Bi–42 wt%Sn alloy is characterized by the presence of rhombohedral Bi and body centered tetragonal β-Sn. The two ternary alloys exhibit additional constituent phases of intermetallic compounds SnIn 19 for Bi–40 wt%Sn–2 wt%In and ε-Ag 3 Sn for Bi–40 wt%Sn–2 wt%Ag alloys. Attention has been paid to the role of intermetallic compounds on mechanical and creep behavior. The In and Ag containing solder alloy exhibited a good combination of higher creep resistance, good mechanical properties and lower melting temperature as compared with Pb–Sn eutectic solder alloy. This was attributed to the strengthening effect of Bi as a strong solid solution element in the Sn matrix and formation of intermetallic compounds β-SnBi, ε-Ag 3 Sn and InSn 19 which act as both strengthening agent and grain refiner in the matrix of the material. Addition of In and Ag decreased the melting temperature of Bi–Sn lead-free solder from 143 °C to 133 °C which was possible mainly due to the existence of InSn 19 and Ag 3 Sn intermetallic compounds. Elastic constants, internal friction and thermal properties of Bi–Sn based alloys have been studied and analyzed.

  8. Research on the fundamental process of thermal-hydraulic behaviors in severe accident. Behavior of fine droplet flow. JAERI's nuclear research promotion program, H10-027-7. Contract research

    International Nuclear Information System (INIS)

    Kataoka, Isao; Yoshida, Kenji; Matsuura, Keizo

    2002-03-01

    Analytical and experimental researches were carried out on the behavior of fine droplet flow in relation to the fundamental phenomena of thermohydraulics in severe accident. Simulation program of fine droplet behavior in turbulent gas flow was developed based on the eddy interaction model with improvement of Graham's stochastic model on eddy lifetime and eddy size. Furthermore, the developed program are capable of simulating the droplet behavior in annular dispersed flow based on the models of droplet entrainment from liquid film and turbulence modification of gas phase by liquid film. This program was confirmed by the various experimental data on droplet diffusion, deposition. Furthermore, this program was applied to the three dimensional droplet flow with the satisfactory agreement of experimental data. This means the developed program can be used as a simulation program for analysis of severe accident. Experimental research was carried out on the effect of liquid film on the turbulence field of gas flow in annular and annular dispersed flow. Averaged and turbulent velocity of gas phase were measured under various gas and liquid film flow rates. Turbulent velocity of gas phase in annular flow increased compared with single phase gas flow. This is due to turbulence generation by waves in liquid film. Corresponding to the turbulence modification by liquid film, distribution of averaged velocity of gas phase became flattened compared with single phase gas flow. (author)

  9. Research on the fundamental process of thermal-hydraulic behaviors in severe accident. Behavior of fine droplet flow. JAERI's nuclear research promotion program, H10-027-7. Contract research

    Energy Technology Data Exchange (ETDEWEB)

    Kataoka, Isao; Yoshida, Kenji [Osaka Univ., Graduate School of Engineering, Osaka (Japan); Matsuura, Keizo [Nuclear Fuel Industry, Co., Ltd., Tokyo (Japan)

    2002-03-01

    Analytical and experimental researches were carried out on the behavior of fine droplet flow in relation to the fundamental phenomena of thermohydraulics in severe accident. Simulation program of fine droplet behavior in turbulent gas flow was developed based on the eddy interaction model with improvement of Graham's stochastic model on eddy lifetime and eddy size. Furthermore, the developed program are capable of simulating the droplet behavior in annular dispersed flow based on the models of droplet entrainment from liquid film and turbulence modification of gas phase by liquid film. This program was confirmed by the various experimental data on droplet diffusion, deposition. Furthermore, this program was applied to the three dimensional droplet flow with the satisfactory agreement of experimental data. This means the developed program can be used as a simulation program for analysis of severe accident. Experimental research was carried out on the effect of liquid film on the turbulence field of gas flow in annular and annular dispersed flow. Averaged and turbulent velocity of gas phase were measured under various gas and liquid film flow rates. Turbulent velocity of gas phase in annular flow increased compared with single phase gas flow. This is due to turbulence generation by waves in liquid film. Corresponding to the turbulence modification by liquid film, distribution of averaged velocity of gas phase became flattened compared with single phase gas flow. (author)

  10. Effect of Y{sub 2}O{sub 3} addition on the crystal growth and sintering behavior of YSZ nanopowders prepared by a sol-gel process

    Energy Technology Data Exchange (ETDEWEB)

    Kuo, C.-W.; Shen, Y.-H. [Department of Resources Engineering, National Chen Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Hung, I-M. [Yuan Ze Fuel Cell Center, Department of Chemical Engineering and Materials Science, Yuan Ze University, 135 Yuan-Tung Road, Chung-Li, Taoyuan 320, Taiwan (China)], E-mail: imhung@saturn.yzu.edu.tw; Wen, S.-B. [General Education Center, Meiho Institute of Technology, 23 Pingguang Road, Neipu, Pingtung 91202, Taiwan (China); Lee, H.-E. [Faculty of Dentistry, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 807, Taiwan (China); Wang, M.-C. [Faculty of Fragrance and Cosmetics, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 807, Taiwan (China)], E-mail: mcwang@kmu.edu.tw

    2009-03-20

    The effect of Y{sub 2}O{sub 3} (8 mol% {<=} Y{sub 2}O{sub 3} {<=} 10 mol%) addition on the crystal growth and sintering behavior of yttria-stabilized zirconia (YSZ) nanocrystallites prepared by a sol-gel process with various mixtures of ZrOCl{sub 2}.8H{sub 2}O and Y(NO{sub 3}){sub 3}.6H{sub 2}O ethanol-water solutions at low temperatures has been studied. X-ray diffraction (XRD), Brunauer-Emmett-Teller specific surface area analyses (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron diffraction (ED) and dilatometric analysis (DA) have been utilized to characterize the YSZ nanocrystallites. Characterization reveals that the YSZ nanopowders are weakly agglomerated. When calcined at various temperatures for 2 h, the crystallite size increases and the surface area of the YSZ powders decreases when the calcination temperature increased from 673 to 1273 K. A nanocrystallite size distribution between 10 and 15 nm is obtained in the TEM examination, which is consistent with the XRD investigation. The activation energy for crystal growth were determined as 5.75 {+-} 0.68, 4.22 {+-} 0.51, and 5.24 {+-} 0.20 kJ/mol for 8, 9 and 10 YSZ precipitates, respectively. The morphology of the YSZ sintered at high temperature indicates the abnormal growth is due to the low activation energy for crystallite growth.

  11. Effect of Y2O3 addition on the crystal growth and sintering behavior of YSZ nanopowders prepared by a sol-gel process

    International Nuclear Information System (INIS)

    Kuo, C.-W.; Shen, Y.-H.; Hung, I-M.; Wen, S.-B.; Lee, H.-E.; Wang, M.-C.

    2009-01-01

    The effect of Y 2 O 3 (8 mol% ≤ Y 2 O 3 ≤ 10 mol%) addition on the crystal growth and sintering behavior of yttria-stabilized zirconia (YSZ) nanocrystallites prepared by a sol-gel process with various mixtures of ZrOCl 2 .8H 2 O and Y(NO 3 ) 3 .6H 2 O ethanol-water solutions at low temperatures has been studied. X-ray diffraction (XRD), Brunauer-Emmett-Teller specific surface area analyses (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron diffraction (ED) and dilatometric analysis (DA) have been utilized to characterize the YSZ nanocrystallites. Characterization reveals that the YSZ nanopowders are weakly agglomerated. When calcined at various temperatures for 2 h, the crystallite size increases and the surface area of the YSZ powders decreases when the calcination temperature increased from 673 to 1273 K. A nanocrystallite size distribution between 10 and 15 nm is obtained in the TEM examination, which is consistent with the XRD investigation. The activation energy for crystal growth were determined as 5.75 ± 0.68, 4.22 ± 0.51, and 5.24 ± 0.20 kJ/mol for 8, 9 and 10 YSZ precipitates, respectively. The morphology of the YSZ sintered at high temperature indicates the abnormal growth is due to the low activation energy for crystallite growth

  12. Influence of minor combined addition of Cr and Pr on microstructure, mechanical properties and corrosion behaviors of an ultrahigh strength Al-Zn-Mg-Cu-Zr alloy.

    Science.gov (United States)

    Wang, Ming; Huang, Lanping; Chen, Kanghua; Liu, Wensheng

    2018-01-01

    This work focuses on controlling grain boundary structure in an ultra-high strength Al-8.6Zn-2.5Mg-2.2Cu-0.16Zr (wt.%) alloy by the combined addition of trace Cr (0.1wt.%) and Pr (0.14wt.%), and evaluating mechanical properties and localized corrosion behaviors of the alloy in the peak aged condition. The introduction of trace Cr and Pr leads to the formation of nanoscale Cr, Pr-containing Al 3 Zr and Zr-containing PrCr 2 Al 20 dispersoids which can obviously inhibit the recrystallization and sub-grain growth of the super-high strength Al-Zn-Mg-Cu alloys, and retain the deformation-recovery microstructure dominated by low-angle grain boundaries. The nearly ellipsoidal dispersoids with a size of 10-35nm are discretely distributed and precipitate free zones are hardly formed in low-angle grain boundaries. This new alloy composition exhibits better combined properties, higher resistance to stress corrosion, exfoliation corrosion and inter-granular corrosion with the undamaged strength, ductility and fracture toughness. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Knowledge and Perception about Clinical Research Shapes Behavior: Face to Face Survey in Korean General Public.

    Science.gov (United States)

    Choi, Yun Jung; Beck, Sung-Ho; Kang, Woon Yong; Yoo, Soyoung; Kim, Seong-Yoon; Lee, Ji Sung; Burt, Tal; Kim, Tae Won

    2016-05-01

    Considering general public as potential patients, identifying factors that hinder public participation poses great importance, especially in a research environment where demands for clinical trial participants outpace the supply. Hence, the aim of this study was to evaluate knowledge and perception about clinical research in general public. A total of 400 Seoul residents with no previous experience of clinical trial participation were selected, as representative of population in Seoul in terms of age and sex. To minimize selection bias, every fifth passer-by was invited to interview, and if in a cluster, person on the very right side was asked. To ensure the uniform use of survey, written instructions have been added to the questionnaire. Followed by pilot test in 40 subjects, the survey was administered face-to-face in December 2014. To investigate how perception shapes behavior, we compared perception scores in those who expressed willingness to participate and those who did not. Remarkably higher percentage of responders stated that they have heard of clinical research, and knew someone who participated (both, P perceptions and lack of knowledge will be effective in enhancing public engaged in clinical research.

  14. A Multi-Case Study of Research Using Mobile Imaging, Sensing and Tracking Technologies to Objectively Measure Behavior: Ethical Issues and Insights to Guide Responsible Research Practice

    Science.gov (United States)

    Nebeker, Camille; Linares-Orozco, Rubi; Crist, Katie

    2015-01-01

    Introduction: The increased availability of mobile sensing technologies is creating a paradigm shift for health research by creating new opportunities for measuring and monitoring behavior. For example, researchers can now collect objective information about a participant's daily activity using wearable devices that have: 1- Global Positioning…

  15. Behavioral science and the study of gene-nutrition and gene-physical activity interactions in obesity research.

    Science.gov (United States)

    Faith, Myles S

    2008-12-01

    This report summarizes emerging opportunities for behavioral science to help advance the field of gene-environment and gene-behavior interactions, based on presentations at The National Cancer Institute (NCI) Workshop, "Gene-Nutrition and Gene-Physical Activity Interactions in the Etiology of Obesity." Three opportunities are highlighted: (i) designing potent behavioral "challenges" in experiments, (ii) determining viable behavioral phenotypes for genetics studies, and (iii) identifying specific measures of the environment or environmental exposures. Additional points are underscored, including the need to incorporate novel findings from neuroimaging studies regarding motivation and drive for eating and physical activity. Advances in behavioral science theory and methods can play an important role in advancing understanding of gene-brain-behavior relationships in obesity onset.

  16. Research

    African Journals Online (AJOL)

    ebutamanya

    2015-10-02

    Oct 2, 2015 ... thought to prevent infection, but recent research has proven otherwise. In addition ... One patient had ophthalmalgia and was exposed to. Kaiy for one year and ... migraine, ear infections, tuberculosis, bone fractures, epilepsy,.

  17. Research

    African Journals Online (AJOL)

    abp

    15 févr. 2016 ... présentent un Indice de Masse Corporel (IMC) normal, les autres femmes sont soit ..... In The health belief model and personal health behavior, edited by MH ... Evaluation of the Osteoporosis Health Belief Scale. Research in.

  18. A basic research on the transient behavior for a metallic fuel FBR

    International Nuclear Information System (INIS)

    Baba, Mamoru; Hirano, Go; Kawada, Ken-ichi; Niwa, Hajime

    1999-03-01

    A metallic fuel with novel design has received great deal of interest recently as an option of advanced fuel to be substituted MOX fuel, however, the behavior at the transient has not been studied in many aspects. Therefore, for the purpose to show the basic tendency of the behavior and released energy at CDA (core disruptive accident) for a metallic fuel FBR and to prepare the basic knowledge for consideration of the adoption of the advanced fuel, Tohoku university and Power Reactor and Nuclear Fuel Development Corporation have made a joint research entitled 'A basic research on the transient behavior for a metallic fuel FBR'. The results are the following. (1) Target and Results of analysis: The accident initiator considered is a LOF accident without scram. The LOF analysis was performed for a metallic fuel 600 MWe homogeneous two region core at the beginning of cycle, both for an ordinary metallic fuel core and for a metallic fuel core with ZrH pins. It was necessary mainly to change the constants of input parameters to apply the code for the analysis of a metallic fueled reactor. These changes were made by assuming appropriate models. Basic LOF cases and all blackout case that assumed using electromagnetic pumps were analyzed. The results show that the basic LOF cases for a metallic fuel core and all the cases for a metallic fuel core with ZrH pins could be avoided to become prompt-critical, and mildly transfer to the transition phase. It is shown that the moderator is quite elective to mitigate the accident at the initiation phase. However, it is necessary to analyze the transition phase to know if the re-criticality is totally avoided after the initiation phase. (2) Improvement of CDA initiation phase analysis code: At present, it is difficult for the code to adapt to the large scale material movement in the core at the transient. Therefore, the nuclear calculation model in the code was improved by using the adiabatic space dependent kinetics, and examined

  19. Phenomenological study on crystalline rock for evaluating of long-term behavior (Contract research)

    International Nuclear Information System (INIS)

    Okubo, Seisuke; Seno, Yasuhiro; Hirano, Toru; Matsui, Hiroya; Nakama, Shigeo

    2008-08-01

    The Japan Atomic Energy Agency (JAEA) is conducting the Mizunami Underground Research Laboratory (MIU) Project in order to develop comprehensive geological investigation and engineering techniques for deep underground applications (e.g. repository of HLW). The purpose of this study is to contribute to the evaluation of the mechanical stability of a research drift and to plan the future studies. Rock shows time-dependent behavior such as creep/relaxation. For the shaft and gallery of the geological disposal for the radioactive waste, the mechanical stability over a period of thousands of years is demanded not only during construction and operation but also after back-filling. So, to understand the time-dependent behavior of rock is very important for evaluating the long-term mechanical stability. This study is aiming to find out the mechanism of time-dependent behavior of rock such as creep by the precision test, observation and measurement, to develop the evaluating method of long-term behavior of rock mass, and to get the information for planning the study of the Phase III (Operation Phase) at the Mizunami URL. In the previous work conducted before this fiscal year 2007, we improved the testing technique and started test of Toki granite sampled from target site. Furthermore we studied the in-situ measurement method for evaluating the scatter of rock properties. This report describes the results of the works in the fiscal year 2007. In Chapter 1, we described the overview and background of this study. In Chapter 2, the result of continuing creep test of Tage tuff which was started from the fiscal year 1997 was described. Although there was some annual variability, the precious data were obtained. In Chapter 3, the control program for the generalized relaxation test was developed. The generalized relaxation test of Toki granite was conducted in order to get basically data. In Chapter 4, the extended constitutive equation of variable compliance was analytically

  20. Phenomenological study on crystalline rock for evaluating of long-term behavior (Contract research)

    International Nuclear Information System (INIS)

    Okubo, Seisuke; Fukui, Katsunori; Hashiba, Kimihiro; Hikima, Ryoichi; Tanno, Takeo; Sanada, Hiroyuki; Matsui, Hiroya; Sato, Toshinori

    2012-02-01

    Rock, under in situ conditions, shows time-dependent behavior such as creep/relaxation. With respect to high-level radioactive waste disposal, knowledge of the long-term mechanical stability of shafts and galleries excavated in rock is required, not only during construction and operation but also over a period of thousands of years after closure. Therefore, it is very important to understand the time-dependent behavior of rock for evaluating long-term mechanical stability. The purpose of this study is determining the mechanisms of time-dependent behavior of rock by precise testing, observation and measurement in order to develop methods for evaluating long-term mechanical stability of a rock mass. In the previous work, testing techniques have been established and basic evaluation methods were developed. Recently, some parameters needed for simulation of time-dependent behavior were determined at the Mizunami underground research facilities. However, sufficient data to check the reliability of the evaluation method for these parameters were not available. This report describes the results of the activities in fiscal year 2010. In Chapter 1, we provide an overview and the background to this study. In Chapter 2, the results of a long-term creep test on Tage tuff, started in fiscal year 1997 are described. In Chapter 3, the relation of loading-rate dependency of strength and stress dependency of creep life, the relation of time dependency, probability distribution and size effects are discussed to indicate more clearly the meaning of the value of 'n' to express the degree of time dependency of the rock. Furthermore, past studies concerning the value of 'n' are reviewed and the tests that could be carried out in future studies of mechanical properties and time dependency of Toki granite are considered in this Chapter. In Chapter 4, failure criterions of a rock mass considering time dependency are discussed. In Chapter 5, the FEM analysis implemented with a generalized

  1. Corrosion behavior of Fe3Al intermetallics with addition of lithium, cerium and nickel in 2.5 % SO2+N2 at 900 °C

    Directory of Open Access Journals (Sweden)

    González-Rodríguez, J. G.

    2012-12-01

    Full Text Available The corrosion behavior of Fe3Al-type intermetallic alloys with addition of 1 at. % cerium, lithium and nickel at high temperature has been studied. The various alloys were exposed to an environment composed of 2.5 % SO2+N2 at 900 °C for 48 h. For all the intermetallic tested, the corrosion kinetics showed a parabolic behavior. The alloy, which showed less corrosion rate, was the Fe3AlNi alloy, being Fe3AlCeLi the alloy with the highest corrosion rate. For the various alloys, energy dispersive X-ray spectroscopy analysis, EDS, on the developed scale only detected aluminum, oxygen, and traces of iron and cerium, suggesting the formation of alumina as main component. The intermetallic alloys showed oxide cracking and spalling. The intermetallic chemical composition played an important role in defining the oxide scale morphology and the extent of damage.Se estudió el comportamiento a la corrosión a alta temperatura de intermetálicos tipo Fe3Al con adición de 1at. % de cerio, litio y níquel. Las diferentes aleaciones fueron expuestas bajo un ambiente compuesto de 2,5 % SO2+N2 a 900 °C durante 48 h. Para todos los intermetálicos ensayados, la cinética de corrosión presentó un comportamiento parabólico. La aleación que mostró la menor velocidad de corrosión fue el intermetálico Fe3AlNi, siendo el intermetálico Fe3AlCeLi el de mayor velocidad de corrosión. Los análisis mediante espectroscopía de dispersión de rayos X, EDS, sobre la costra formada identificaron únicamente aluminio, oxígeno y trazas de hierro y cerio, lo que sugiere la formación de alúmina como el componente principal. Los intermetálicos mostraron agrietamiento y desprendimiento de la costra de óxido. La composición química de los intermetálicos tuvo un papel importante en la definición de la morfología del óxido formado y el grado de daño.

  2. Analysis of FP aerosol behavior in piping in WIND project. Contract research

    Energy Technology Data Exchange (ETDEWEB)

    Hidaka, Akihide; Maruyama, Yu; Shibazaki, Hiroaki; Maeda, Akio; Harada, Yuhei [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nagashima, Toshio; Yoshino, Takehito; Sugimoto, Jun

    1998-07-01

    In the analyses of aerosol behavior test in piping in WIND (Wide Range Piping Integrity Demonstration) project at Japan Atomic Energy Research Institute (JAERI), ART code developed by JAERI and VICTORIA code developed by Sandia National Laboratories are used to perform WIND test analysis and to validate the models in the both codes. It is noted that VICTORIA code is supposed to be used as reference code of ART at JAERI. As a part of these activities, WIND Aerosol Deposition tests (WAD4 and 5) and FP aerosol behaviors in safety relief valve (SRV) line during BWR high pressure sequence which will be performed in future WIND experiment were analyzed with ART and VICTORIA codes. The present analyses showed that the portion and mass with relatively large amount of cesium iodide (CsI) deposition observed in WAD4 and 5 tests were reasonably reproduced by ART and VICTORIA codes. A difference was found in condensation and revaporization behaviors of gaseous CsI between the two codes. VICTORIA overestimated the condensed mass of CsI vapor while ART reproduced better the experimental data than the VICTORIA calculation. Further investigation is needed for this issue. Although the deposition mass at the pipe connection part in WAD4 and 5 experiments was not measured, the mass at that portion will be measured from next experiment because relatively large amount of CsI could be deposited there and the measurement is considered to be useful for code verification. The predicted principal aerosol deposition mechanism in SRV line is turbulence. Temperature of SRV line could increase by about 300 K by decay heat from deposited FPs. However, the SRV line made of carbon steel would not be failed because the predicted temperature is still far lower than the melting temperature of carbon steel. (author)

  3. The Concept of Information Sharing Behaviors in Complex Organizations: Research in Latvian Enterprises

    Directory of Open Access Journals (Sweden)

    Andrejs Cekuls

    2016-12-01

    Full Text Available The purpose of this paper is to explore the factors influencing behaviors of information sharing in complex organizations. Evaluation of the previous studies on provision of information turnover process and the role of organizational culture in competitive intelligence of business environment in Latvia indicated the trends that employees of Latvian enterprises lack incentive to share information. Tasks of the study were to research the basis of the review of scientific sources and study aspects influencing habits of information sharing in complex organizations. For this particular study, the focus group is selected as the most appropriate data collection method for high-quality research. To find out individuals' opinions and attitudes two focus group discussions were carried out. Members from various industries and with different employment period were included in discussion groups. In aggregate, opinions of the employees from 41 different companies were summarized regarding the aspects affecting the process of information sharing in organizations. Results of researches show that that influence the sharing of information are closely related to the values: interpersonal trust, organizational trust, and organizational identification, support, fairness etc. Results of discussions showed that it is important for a manager to be aware of the factors affecting the performance of the organization. To identify the need for changes, a manager should follow events in the environment and analyze the extent, to which they affect the performance of the organization. Complexity science suggests that maturity to changes emerges when the system is far from balance, but the tension makes to accept changes.

  4. Incentives to create and sustain healthy behaviors: technology solutions and research needs.

    Science.gov (United States)

    Teyhen, Deydre S; Aldag, Matt; Centola, Damon; Edinborough, Elton; Ghannadian, Jason D; Haught, Andrea; Jackson, Theresa; Kinn, Julie; Kunkler, Kevin J; Levine, Betty; Martindale, Valerie E; Neal, David; Snyder, Leslie B; Styn, Mindi A; Thorndike, Frances; Trabosh, Valerie; Parramore, David J

    2014-12-01

    Health-related technology, its relevance, and its availability are rapidly evolving. Technology offers great potential to minimize and/or mitigate barriers associated with achieving optimal health, performance, and readiness. In support of the U.S. Army Surgeon General's vision for a "System for Health" and its Performance Triad initiative, the U.S. Army Telemedicine and Advanced Technology Research Center hosted a workshop in April 2013 titled "Incentives to Create and Sustain Change for Health." Members of government and academia participated to identify and define the opportunities, gain clarity in leading practices and research gaps, and articulate the characteristics of future technology solutions to create and sustain real change in the health of individuals, the Army, and the nation. The key factors discussed included (1) public health messaging, (2) changing health habits and the environmental influence on health, (3) goal setting and tracking, (4) the role of incentives in behavior change intervention, and (5) the role of peer and social networks in change. This report summarizes the recommendations on how technology solutions could be employed to leverage evidence-based best practices and identifies gaps in research where further investigation is needed. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

  5. Innovative Graduate Research Education for Advancement of Implementation Science in Adolescent Behavioral Health.

    Science.gov (United States)

    Burton, Donna L; Levin, Bruce Lubotsky; Massey, Tom; Baldwin, Julie; Williamson, Heather

    2016-04-01

    An innovative approach to research education that integrates the theory and principles of implementation science, participatory research, and service learning in the area of adolescent behavioral health is presented. Qualitative interviews and surveys of program participants have been conducted to assess the program's curricula, service-learning partnerships, student (scholar) satisfaction, and views of community partnerships and academic mentors. The Institute has experienced the successful completion of its first and second cohorts and enrollment of a third cohort of scholars. Community partners are utilizing results of service-learning projects to influence agency operations. Institute scholars have identified research and service learning experiences as key factors in the decision to apply to the Institute graduate certificate program. The availability of tuition support is identified as valuable but not ranked as the most important reason for scholar interest in the program. Academic mentors report positive relationships with community agencies. Future iterations of the program will expand options for distance learning and alternatives to traditional graduate education for community-based scholars. Community partner agency capacity for participation is expected to change over time. Methods are being identified to both sustain existing partnerships and develop new community partnership relationships.

  6. RESEARCHES ON GROOMING BEHAVIOR OF THE DAMCALF COUPLE DURING THE FIRST WEEK AFTER CALVING

    Directory of Open Access Journals (Sweden)

    I. TRIPON

    2008-10-01

    Full Text Available This paper is dealing with the maternal behavior during the first week after calving. Researches were carried out during the winter season on Romanian Black and White breed dam-calf couples. The behavior of calves and their mothers was nonstop video recorded during the first, second and seventh day after calving. For a better interpretation the recorded material was divided in three periods for every 24 hours of surveillance: 07:00 to 15:00, 15:00 to 23:00, and 23:00 to 07:00. Calves received attention from their mothers in 18 to 33 grooming periods during the first day after calving. The number of grooming periods decreased to 6 – 15 periods per day in the seventh day after calving. The total length of grooming periods also decreased from the first day to the seventh day after calving from 26.5 minutes to 7.4 minutes on each 8-hour time frame. There were also contacts between mother cows and their calves that were not followed by grooming (sniffing. The number of contacts without grooming was higher during the first two days after calving and decreased on the seventh day after calving. During the first week of life calves received, 55.6 minutes per day of care from their mothers, and there were, on average, 8.1 contacts without grooming between mothers and calves.

  7. Recent trends in the U.S. Behavioral and Social Sciences Research (BSSR workforce.

    Directory of Open Access Journals (Sweden)

    Hyungjo Hur

    Full Text Available While behavioral and social sciences occupations comprise one of the largest portions of the "STEM" workforce, most studies of diversity in STEM overlook this population, focusing instead on fields such as biomedical or physical sciences. This study evaluates major demographic trends and productivity in the behavioral and social sciences research (BSSR workforce in the United States during the past decade. Our analysis shows that the demographic trends for different BSSR fields vary. In terms of gender balance, there is no single trend across all BSSR fields; rather, the problems are field-specific, and disciplines such as economics and political science continue to have more men than women. We also show that all BSSR fields suffer from a lack of racial and ethnic diversity. The BSSR workforce is, in fact, less representative of racial and ethnic minorities than are biomedical sciences or engineering. Moreover, in many BSSR subfields, minorities are less likely to receive funding. We point to various funding distribution patterns across different demographic groups of BSSR scientists, and discuss several policy implications.

  8. Applying the concept of culture to reduce health disparities through health behavior research.

    Science.gov (United States)

    Kagawa Singer, Marjorie

    2012-11-01

    Culture is often cited as an underlying cause of the undue burden of disease borne by communities of color along the entire life cycle. However, culture is rarely defined or appropriately measured. Scientifically, culture is a complex, integrated, and dynamic conceptual framework that is incongruent with the way it is operationalized in health behavior theories: as a unidimensional, static, and immutable character element of a homogeneous population group. This paper lays out this contradiction and proposes a more scientifically grounded approach to the use of culture. The premise is that if the concept of culture were better operationalized, results from studies of diverse population groups would produce findings that are more scientifically valid and relevant to the community. Practitioners could then use these findings to develop more effective strategies to reduce health disparities and improve the health of all population groups. Six steps are proposed to increase our ability to achieve greater clarity on what culture is and to identify how it impacts health behavior and ultimately health outcomes, enabling researchers to build a stronger science of cultural diversity. Copyright © 2012. Published by Elsevier Inc.

  9. The Results of Complex Research of GSS "SBIRS-Geo 2" Behavior in the Orbit

    Science.gov (United States)

    Sukhov, P. P.; Epishev, V. P.; Sukhov, K. P.; Karpenko, G. F.; Motrunich, I. I.

    2017-04-01

    The new generation of geosynchronous satellites SBIRS of US Air Force early warning system series (Satellite Early Warning System) replaced the previous DSP-satellite series (Defense Support Program). Currently from the territory of Ukraine, several GSS of DSP series and one "SBIRS-Geo 2" are available to observation. During two years of observations, we have received and analyzed for two satellites more than 30 light curves in B, V, R photometric system. As a result of complex research, we propose a model of "SBIRS-Geo" 2 orbital behavior compared with the same one of the DSP-satellite. To control the entire surface of the Earth with 15-16 sec interval, including the polar regions, 4 SBIRS satellites located every 90 deg. along the equator are enough in GEO orbit. Since DSP-satellites provide the coverage of the Earth's surface to 83 deg. latitudes with a period of 50 sec, DSP-satellites should be 8. All the conclusions were made based on an analysis of photometric and coordinate observations using the simulation of the dynamics of their orbital behavior.

  10. I sleep, because we sleep: a synthesis on the role of culture in sleep behavior research.

    Science.gov (United States)

    Airhihenbuwa, C O; Iwelunmor, J I; Ezepue, C J; Williams, N J; Jean-Louis, G

    2016-02-01

    The aim of this study was to synthesize the literature on the cultural aspects of sleep and their relevance to behavioral sleep research. A narrative synthesis of the existing literature on sleep was conducted with a focus on its biological, sociological, political, and anthropological aspects. This synthesis was guided by the PEN-3 cultural model, developed by the primary author. The findings highlight the cross-cultural contexts within which people sleep and the role of varied sleeping arrangements in influencing sleep behavior and perspectives. Furthermore, the contexts in which sleep occurs, coupled with the influence of the family, and the positive aspects of sleep helped illustrate why cultural aspects of sleep are vital for a broader understanding of sleep. The authors conclude by highlighting the need to integrate studies on the biological, sociological, and political aspects of sleep. Our examination of the literature strongly suggests that careful assessment of epidemiological and clinical sleep data should consider the cultural aspects of sleep as well as the context in which sleep occurs, the role of the family, and positive aspects of sleep. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Length-scale dependent microalloying effects on precipitation behaviors and mechanical properties of Al–Cu alloys with minor Sc addition

    International Nuclear Information System (INIS)

    Jiang, L.; Li, J.K.; Liu, G.; Wang, R.H.; Chen, B.A.; Zhang, J.Y.; Sun, J.; Yang, M.X.; Yang, G.; Yang, J.; Cao, X.Z.

    2015-01-01

    Heat-treatable Al alloys containing Al–2.5 wt% Cu (Al–Cu) and Al–2.5 wt% Cu–0.3 wt% Sc (Al–Cu–Sc) with different grain length scales, i.e., average grain size >10 μm ( defined coarse grained, CG), 1–2 μm (fine grained, FG), and <1 μm (ultrafine grained, UFG), were prepared by equal-channel angular pressing (ECAP). The length scale and Sc microalloying effects and their interplay on the precipitation behavior and mechanical properties of the Al–Cu alloys were systematically investigated. In the Al–Cu alloys, intergranular θ-Al 2 Cu precipitation gradually dominated by sacrificing the intragranular θ′-Al 2 Cu precipitation with reducing the length scale. Especially in the UFG regime, only intergranular θ-Al 2 Cu particles were precipitated and intragranular θ′-Al 2 Cu precipitation was completely disappeared. This led to a remarkable reduction in yield strength and ductility due to insufficient dislocation storage capacity. The minor Sc addition resulted in a microalloying effect in the Al–Cu alloy, which, however, is strongly dependent on the length scale. The smaller is the grain size, the more active is the microalloying effect that promotes the intragranular precipitation while reduces the intergranular precipitation. Correspondingly, compared with their Sc-free counterparts, the yield strength of post-aged CG, FG, and UFG Al–Cu alloys with Sc addition increased by ~36 MPa, ~56 MPa, and ~150 MPa, simultaneously in tensile elongation by ~20%, ~30%, and 280%, respectively. The grain size-induced evolutions in vacancy concentration/distribution and number density of vacancy-solute/solute–solute clusters and their influences on precipitation nucleation and kinetics have been comprehensively considered to rationalize the length scale-dependent Sc microalloying mechanisms using positron annihilation lifetime spectrum and three dimension atom probe. The increase in ductility was analyzed in the light of Sc microalloying effect and the

  12. Length-scale dependent microalloying effects on precipitation behaviors and mechanical properties of Al–Cu alloys with minor Sc addition

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, L.; Li, J.K. [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Liu, G., E-mail: lgsammer@mail.xjtu.edu.cn [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Wang, R.H. [School of Materials Science and Engineering, Xi' an University of Technology, Xi' an 710048 (China); Chen, B.A.; Zhang, J.Y. [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Sun, J., E-mail: junsun@mail.xjtu.edu.cn [State Key Laboratory for Mechanical Behavior of Materials, Xi' an Jiaotong University, Xi' an 710049 (China); Yang, M.X.; Yang, G. [Central Iron and Steel Research Institute, Beijing 100081 (China); Yang, J.; Cao, X.Z. [Key Laboratory of Nuclear Radiation and Nuclear Energy Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2015-06-18

    Heat-treatable Al alloys containing Al–2.5 wt% Cu (Al–Cu) and Al–2.5 wt% Cu–0.3 wt% Sc (Al–Cu–Sc) with different grain length scales, i.e., average grain size >10 μm ( defined coarse grained, CG), 1–2 μm (fine grained, FG), and <1 μm (ultrafine grained, UFG), were prepared by equal-channel angular pressing (ECAP). The length scale and Sc microalloying effects and their interplay on the precipitation behavior and mechanical properties of the Al–Cu alloys were systematically investigated. In the Al–Cu alloys, intergranular θ-Al{sub 2}Cu precipitation gradually dominated by sacrificing the intragranular θ′-Al{sub 2}Cu precipitation with reducing the length scale. Especially in the UFG regime, only intergranular θ-Al{sub 2}Cu particles were precipitated and intragranular θ′-Al{sub 2}Cu precipitation was completely disappeared. This led to a remarkable reduction in yield strength and ductility due to insufficient dislocation storage capacity. The minor Sc addition resulted in a microalloying effect in the Al–Cu alloy, which, however, is strongly dependent on the length scale. The smaller is the grain size, the more active is the microalloying effect that promotes the intragranular precipitation while reduces the intergranular precipitation. Correspondingly, compared with their Sc-free counterparts, the yield strength of post-aged CG, FG, and UFG Al–Cu alloys with Sc addition increased by ~36 MPa, ~56 MPa, and ~150 MPa, simultaneously in tensile elongation by ~20%, ~30%, and 280%, respectively. The grain size-induced evolutions in vacancy concentration/distribution and number density of vacancy-solute/solute–solute clusters and their influences on precipitation nucleation and kinetics have been comprehensively considered to rationalize the length scale-dependent Sc microalloying mechanisms using positron annihilation lifetime spectrum and three dimension atom probe. The increase in ductility was analyzed in the light of Sc microalloying

  13. Consumer Behavior and the Plug-In Electric Vehicle Purchase Decision Process: A Research Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Margaret [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impact Dept.; Fujita, K. Sydney [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impact Dept.

    2018-01-31

    This report synthesizes consumer behavior research as it pertains to the plug-in electric vehicle (PEV) purchase decision process. The purpose is to clarify what is known about the vital role consumers play in the U.S. PEV market as it matures to become less policy-reliant and more representative of the U.S., both spatially and demographically. A more representative PEV market will: help OEMs recoup more of their R&D investments in PEVs; help American consumers access the economic and performance benefits of PEVs; and help the U.S. become more energy independent while improving air quality-related public health and reducing greenhouse gas emissions.

  14. A RESEARCH ON HEALTHY LIVING BEHAVIORS OF ARCHERY COACHES AND BOXING COACHES

    Directory of Open Access Journals (Sweden)

    Ziya Bahadır

    2014-07-01

    Full Text Available The aim of the research was to assess healthy living behaviors of archery coaches and boxing coaches in terms of sportive branch, sportive experience and gender. The study was conducted with boxing coaches (n=119 and archery coaches (n=131. As the data collection tool; “ The Health - Promoting Lifestyle Profile II (HPLP - II which was developed by Walker et al . and validity and reliability tests of which were performed by Bahar et al . (2008 was employed. In the study; it was found out that mean score of boxing coaches on P hysical activity subscale was higher than archery coaches . Besides; no statistically significant difference s existed between archery coaches and boxing coaches in terms of gender and sportive experience.

  15. The Pace of Technologic Change: Implications for Digital Health Behavior Intervention Research.

    Science.gov (United States)

    Patrick, Kevin; Hekler, Eric B; Estrin, Deborah; Mohr, David C; Riper, Heleen; Crane, David; Godino, Job; Riley, William T

    2016-11-01

    This paper addresses the rapid pace of change in the technologies that support digital interventions; the complexity of the health problems they aim to address; and the adaptation of scientific methods to accommodate the volume, velocity, and variety of data and interventions possible from these technologies. Information, communication, and computing technologies are now part of every societal domain and support essentially every facet of human activity. Ubiquitous computing, a vision articulated fewer than 30 years ago, has now arrived. Simultaneously, there is a global crisis in health through the combination of lifestyle and age-related chronic disease and multiple comorbidities. Computationally intensive health behavior interventions may be one of the most powerful methods to reduce the consequences of this crisis, but new methods are needed for health research and practice, and evidence is needed to support their widespread use. The challenges are many, including a reluctance to abandon timeworn theories and models of health behavior-and health interventions more broadly-that emerged in an era of self-reported data; medical models of prevention, diagnosis, and treatment; and scientific methods grounded in sparse and expensive data. There are also many challenges inherent in demonstrating that newer approaches are, indeed, effective. Potential solutions may be found in leveraging methods of research that have been shown to be successful in other domains, particularly engineering. A more "agile science" may be needed that streamlines the methods through which elements of health interventions are shown to work or not, and to more rapidly deploy and iteratively improve those that do. There is much to do to advance the issues discussed in this paper, and the papers in this theme issue. It remains an open question whether interventions based in these new models and methods are, in fact, equally if not more efficacious as what is available currently. Economic

  16. Lack of Impact of Posidonia oceanica Leaf Nutrient Enrichment on Sarpa salpa Herbivory: Additional Evidence for the Generalist Consumer Behavior of This Cornerstone Mediterranean Herbivore.

    Science.gov (United States)

    Marco-Méndez, Candela; Wessel, Caitlin; Scheffel, Whitney; Ferrero-Vicente, Luis; Fernández-Torquemada, Yolanda; Cebrián, Just; Heck, Kenneth L; Sánchez-Lizaso, Jose Luis

    2016-01-01

    The fish Sarpa salpa (L.) is one of the main macroherbivores in the western Mediterranean. Through direct and indirect mechanisms, this herbivore can exert significant control on the structure and functional dynamics of seagrass beds and macroalgae. Past research has suggested nutritional quality of their diet influences S. salpa herbivory, with the fish feeding more intensively and exerting greater top down control on macrophytes with higher internal nutrient contents. However recent findings have questioned this notion and shown that herbivores do not preferentially feed on macrophytes with higher nutrient contents, but rather feed on a wide variety of them with no apparent selectivity. To contribute to this debate, we conducted a field fertilization experiment where we enriched leaves of the seagrass Posidonia oceanica, a staple diet for S. salpa, and examined the response by the herbivore. These responses included quantification of leaf consumption in fertilized and non-fertilized/control plots within the bed, and food choice assays where fertilized and non-fertilized/control leaves were simultaneously offered to the herbivore. Despite the duration of leaf exposure to herbivores (30 days) and abundant schools of S. salpa observed around the plots, leaf consumption was generally low in the plots examined. Consumption was not higher on fertilized than on non-fertilized leaves. Food choice experiments did not show strong evidence for selectivity of enriched leaves. These results add to a recent body of work reporting a broad generalist feeding behavior by S. salpa with no clear selectivity for seagrass with higher nutrient content. In concert, this and other studies suggest S. salpa is often generalist consumers not only dictated by diet nutrient content but by complex interactions between other traits of nutritional quality, habitat heterogeneity within their ample foraging area, and responses to predation risk.

  17. Exploring Graduate Students’ Attitudes towards Team Research and Their Scholarly Productivity: A Survey Guided by the Theory of Planned Behavior

    Directory of Open Access Journals (Sweden)

    Tianlan Wei

    2015-01-01

    Full Text Available This study explores the attitudinal and motivational factors underlying graduate students’ attitudes towards team research. Guided by the Theory of Planned Behavior, we hypothesize that attitude, subjective norm, and perceived behavioral control are three major determinants of graduate students’ intentions to conduct team research. An instrument was developed to measure the influences of these factors on students’ intentions and relevant scholarly productivity. A total of 281 graduate students from a large, comprehensive university in the southwest United States participated in the survey. Descriptive statistics reveal that around two-thirds of graduate students have no co-authored manuscripts submitted for publication since they started graduate school. Factor analyses validated the factor structure of the instrument, and the results of Structural Equation Modeling show that (a graduate students’ attitudes towards team research have a positive correlation with their attitudes towards individual research; (b attitude towards team research, subjective norm, and perceived behavioral control, along with students’ discipline/major areas and classification, account for 58% of the variance in the intention to conduct team research; and (c subjective norm appears to be the most influential factor in the model, followed by attitude; while perceived behavioral control is not of much importance. These findings provide implications for academic departments and programs to promote graduate students’ team research. Specifically, creating a climate for collaborative research in academic programs/disciplines/universities may work jointly with enhancing students’ appraisals of such collaborations.

  18. Perceived social support buffers the impact of PTSD symptoms on suicidal behavior: implications into suicide resilience research.

    Science.gov (United States)

    Panagioti, M; Gooding, P A; Taylor, P J; Tarrier, N

    2014-01-01

    A growing body of research has highlighted the importance of identifying resilience factors against suicidal behavior. However, no previous study has investigated potential resilience factors among individuals with Posttraumatic Stress Disorder (PTSD). The aim of this study was to examine whether perceived social support buffered the impact of PTSD symptoms on suicidal behavior. Fifty-six individuals who had previously been exposed to a traumatic event and reported PTSD symptoms in the past month (n = 34, 60.7% participants met the full criteria for a current PTSD diagnosis) completed a range of self-report measures assessing PTSD symptoms, perceived social support and suicidal behavior. Hierarchical regression analyses were conducted to examine whether perceived social support moderates the effects of PTSD symptoms on suicidal behavior. The results showed that perceived social support moderated the impact of the number and severity of PTSD symptoms on suicidal behavior. For those who perceived themselves as having high levels of social support, an increased number and severity of PTSD symptoms were less likely to lead to suicidal behavior. The current findings suggest that perceived social support might confer resilience to individuals with PTSD and counter the development of suicidal thoughts and behaviors. The milieu of social support potentially provides an area of further research and an important aspect to incorporate into clinical interventions for suicidal behavior in PTSD or trauma populations. © 2013.

  19. Using Market Research to Characterize College Students and Identify Potential Targets for Influencing Health Behaviors

    Science.gov (United States)

    Berg, Carla J.; Ling, Pamela M.; Guo, Hongfei; Windle, Michael; Thomas, Janet L.; Ahluwalia, Jasjit S.; An, Lawrence C.

    2013-01-01

    Marketing campaigns, such as those developed by the tobacco industry, are based on market research, which defines segments of a population by assessing psychographic characteristics (i.e., attitudes, interests). This study uses a similar approach to define market segments of college smokers, to examine differences in their health behaviors (smoking, drinking, binge drinking, exercise, diet), and to determine the validity of these segments. A total of 2,265 undergraduate students aged 18–25 years completed a 108-item online survey in fall 2008 assessing demographic, psychographic (i.e., attitudes, interests), and health-related variables. Among the 753 students reporting past 30-day smoking, cluster analysis was conducted using 21 psychographic questions and identified three market segments – Stoic Individualists, Responsible Traditionalists, and Thrill-Seeking Socializers. We found that segment membership was related to frequency of alcohol use, binge drinking, and limiting dietary fat. We then developed three messages targeting each segment and conducted message testing to validate the segments on a subset of 73 smokers representing each segment in spring 2009. As hypothesized, each segment indicated greater relevance and salience for their respective message. These findings indicate that identifying qualitatively different subgroups of young adults through market research may inform the development of engaging interventions and health campaigns targeting college students. PMID:25264429

  20. A review of research programs related to the behavior of plutonium in the environment

    International Nuclear Information System (INIS)

    Bartram, Bart W.; Wilkinson, Martha J.

    1983-01-01

    Plutonium-fueled radioisotopic heat sources find application in a spectrum of space, terrestrial, and underseas applications to generate electrical power by thermoelectric or dynamic-cycle conversion. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population. The released radioactivity could be dispersed into various environmental media, such as air, soil, and water and interact with people through various exposure pathways leading to inhalation, ingestion, and external radiological doses and associated health effects. The authors developed short-term exposure (RISK II) and long-term exposure (RISK III) models for use in safety risk assessments of space missions utilizing plutonium-fueled electric power systems. To effectively use these models in risk assessments, representative input values must be selected for a spectrum of environmental transfer parameters that characterize the behavior of plutonium in the environment. The selection of appropriate transfer parameters to be used in a given analysis will depend on the accident scenarios to be modeled and the terrestrial and aquatic environments to be encountered. The authors reviewed the availability of plutonium in the environment. This report summarizes the research programs presently being conducted at six Department of Energy Laboratories and makes recommendations on areas where further research is needed to fill gaps in the data necessary for risk assessments