WorldWideScience

Sample records for beef strip loins

  1. Effect of the Programmed Nutrition Beef Program on moisture retention of cooked ground beef patties and enhanced strip loins.

    Science.gov (United States)

    2015-02-01

    This study evaluated the influence of the Programmed Nutrition Beef Program and exogenous growth promotants (ExGP) on water holding capacity characteristics of enhanced beef strip loins. Sixty, frozen strip loins, arranged in a 2 × 2 factorial treatment arrangement with dietary program serving as the first factor and use of ExGP as the second factor, were thawed, injected with an enhancement solution, and stored for 7 days. Loins from ExGP cattle possessed the ability to bind more (P water before pumping and bind less (P water after pumping and storage. Loin pH across treatments was similar (P > 0.10) before injection, but increased post-injection and after storage (P 0.10). The Programmed Nutrition Beef Program and use of ExGPs minimally impacted water holding capacity of enhanced frozen/thawed beef strip loins.

  2. The effect of branding on consumer palatability ratings of beef strip loin steaks.

    Science.gov (United States)

    Wilfong, A K; McKillip, K V; Gonzalez, J M; Houser, T A; Unruh, J A; Boyle, E A E; O'Quinn, T G

    2016-11-01

    The objective of this study was to determine the influence of knowing the brand or USDA grade on consumer palatability ratings of beef strip loin steaks. Strip loins were selected to represent 5 USDA grades and brands, USDA Select, Choice, Prime, Certified Angus Beef (CAB; upper 2/3 Choice), and Select, from carcasses of cattle classified as Angus on the basis of phenotype. After 21 d of aging, 2.5-cm-thick steaks were cut, consecutively cut steaks were paired for consumer evaluation. Consumer panelists ( = 112) evaluated samples for tenderness, juiciness, flavor liking, and overall liking. Additionally, consumers rated each palatability trait as either acceptable or unacceptable. Samples were fed in 2 rounds on the same day: blind and informed testing. In the first round, blind testing, consumers were served 1 sample from each treatment, with no product information provided. In the second round, consumers were informed of the brand or quality grade prior to sampling. During blind testing, CAB rated similar ( > 0.05) to Choice for all palatability traits; however, CAB rated greater ( 0.05) for all traits when tested blind, but Angus Select was rated greater ( brand was declared. When comparing blind and informed ratings, Angus Select and CAB had greater ( brand disclosure. However, ratings for Choice and Select samples were unaffected ( > 0.05) when brand was disclosed. Brand knowledge increased ( 0.05) in the percentage of Choice and Select samples rated as acceptable for all palatability traits. These data indicate that Prime, CAB, and Angus Select steaks receive an increase in consumer palatability perception, or "brand lift," which does not occur for Choice and Select beef.

  3. Effects of extended aging and modified atmospheric packaging on beef top loin steak color.

    Science.gov (United States)

    English, A R; Mafi, G G; VanOverbeke, D L; Ramanathan, R

    2016-04-01

    The objective of this study was to evaluate the effects of extended aging and modified atmospheric packaging on beef LM color. Using a randomized complete block design, each beef longissimus lumborum muscle ( = 10; USDA Choice, 3 d postmortem) was equally divided into 3 sections and randomly assigned to 1 of 3 aging periods (21, 42, or 62 d at 2°C). After respective aging, each loin section was cut into four 2.5-cm-thick steaks and randomly assigned to 1 of 3 packaging types (PVC, HiOx-MAP [80% oxygen and 20% carbon dioxide], or CO-MAP [0.4% carbon monoxide, 69.6% nitrogen, and 30% carbon dioxide]). The steaks were displayed under continuous fluorescent lighting for 6 d, and surface color was determined daily using a HunterLab Miniscan XE Plus spectrophotometer and a visual panel. The fourth steak was used to characterize oxygen consumption (OC), lipid oxidation, and metmyoglobin reducing activity (MRA) on 21, 42, and 62 d (before display). On d 6 display, MRA, OC, and lipid oxidation also were measured. An increase in aging time decreased ( packaging × display time interaction ( packaging types on d 6. At all aging periods, steaks packaged in CO-MAP had greater ( packaged in HiOx-MAP had the least MRA ( packaged in CO-MAP and displayed for 6 d. However, steaks packaged in HiOx-MAP and displayed 6 d had greater ( packaged in HiOx-MAP had a lower ( packaged in PVC and HiOx-MAP when aged for 21 d and displayed 6 d. The results indicate that extended aging is detrimental to color stability when packaged in PVC and HiOx-MAP. However, steaks in CO-MAP had stable red color during display. Decreased color stability in PVC and HiOx-MAP could be associated, in part, with decreased MRA and OC.

  4. Influence of PA6 nanocomposite films on the stability of vacuum-aged beef loins during storage in modified atmospheres.

    Science.gov (United States)

    Picouet, P A; Fernandez, A; Realini, C E; Lloret, E

    2014-01-01

    A masterbatch of polyamide 6 (PA6) containing dispersed nanoclays, was used to fabricate a novel multilayer film for vacuum packed meat. Performance of the nanocomposite was compared to a control PA6 multilayer and a high barrier commercial film. Addition of nanoclays improved oxygen barrier properties, UV-blocking capability and stiffness. Beef loins were vacuum-aged using the three films for 0 7, 14 and 21 days at 2°C. After each ageing time, beef steaks were packaged in commercial trays and high oxygen atmosphere and stored at 4°C for 9 days. Beef quality parameters and gas content were studied during display time in MAP (1, 3, 6 and 9 d). Beef quality parameters were not influenced by the packaging materials used during ageing and the performance of nanocomposites was comparable to high barrier films. Ageing had a positive impact on the stabilization of redness up to day 6 in MAP. Thereafter, oxymyoglobin content and oxidation levels were negatively influenced by ageing. © 2013.

  5. The effects of atmospheric pressure cold plasma treatment on microbiological, physical-chemical and sensory characteristics of vacuum packaged beef loin.

    Science.gov (United States)

    Bauer, A; Ni, Y; Bauer, S; Paulsen, P; Modic, M; Walsh, J L; Smulders, F J M

    2017-06-01

    Effects on vacuum packaged and non-packaged beef longissimus samples exposed to atmospheric cold plasma (ACP) generated at different powers were studied over a 10day period of vacuum-, and a subsequent 3day period of aerobic storage. Exposure of non-covered beef samples under high power ACP conditions resulted in increased a*, b*, Chroma and Hue values, but ACP treatment of packaged loins did not impact colour (L*, a*, b*, Chroma, Hue), lipid peroxidation, sarcoplasmic protein denaturation, nitrate/nitrite uptake, or myoglobin isoform distribution. Colour values measured after 3days of aerobic storage following unpackaging (i.e. 20days post-mortem) were similar and all compliant with consumer acceptability standards. Exposure to ACP of the polyamide-polyethylene packaging film inoculated with Staphylococcus aureus, Listeria monocytogenes and two Escherichia coli strains resulted in >2 log reduction without affecting the integrity of the packaging matrix. Results indicate that ACP can reduce microbial numbers on surfaces of beef packages without affecting characteristics of the packaged beef. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Consumer and trained panel evaluation of beef strip steaks of varying marbling and enhancement levels cooked to three degrees of doneness.

    Science.gov (United States)

    Lucherk, L W; O'Quinn, T G; Legako, J F; Rathmann, R J; Brooks, J C; Miller, M F

    2016-12-01

    The palatability of USDA graded beef strip loins of seven treatments [High Enhanced (HE: 112% of raw weight) Select, Low Enhanced (LE: 107% of raw weight) Select, Prime, upper 2/3 Choice (Top Choice), lower 1/3 Choice (Low Choice), Select, and Standard] cooked to three degrees of doneness [DOD; rare (60°C), medium (71°C), or well-done (77°C)] was evaluated by consumer and trained sensory panelists. For consumers, Select HE steaks rated higher (P0.05) were observed between Select LE and Prime samples for most traits evaluated. The effect of USDA grade and enhancement on trained panel palatability scores was independent of DOD for all traits other than juiciness, with the role of marbling in juiciness increasing as DOD increased from rare to well-done. These results indicate enhancement as an effective method to improve the palatability of lower grading beef. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Loin pain hematuria syndrome.

    Science.gov (United States)

    Taba Taba Vakili, Sahar; Alam, Tausif; Sollinger, Hans

    2014-09-01

    Loin pain hematuria syndrome is a rare disease with a prevalence of ∼0.012%. The most prominent clinical features include periods of severe intermittent or persistent unilateral or bilateral loin pain accompanied by either microscopic or gross hematuria. Patients with loin pain hematuria syndrome initially present with hematuria, flank pain, or most often both hematuria and flank pain. Kidney biopsies from patients with loin pain hematuria typically reveal only minor pathologic abnormalities. Further, loin pain hematuria syndrome is not associated with loss of kidney function or urinary tract infections. Loin pain hematuria syndrome-associated hematuria and pain are postulated to be linked to vascular disease of the kidney, coagulopathy, renal vasospasm with microinfarction, hypersensitivity, complement activation on arterioles, venocalyceal fistula, abnormal ureteral peristalsis, and intratubular deposition of calcium or uric acid microcrystals. Many patients with loin pain hematuria syndrome also meet criteria for a somatoform disorder, and analgesic medications, including narcotics, commonly are used to treat loin pain hematuria syndrome-associated pain. Interventional treatments include renal denervation, kidney autotransplantation, and nephrectomy; however, these methods should be used only as a last resort when less invasive measures have been tried unsuccessfully. In this review article, we discuss and critique current clinical practices related to loin pain hematuria syndrome pathophysiology, diagnosis, treatment, and prognosis. Copyright © 2014 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  8. Nutrient analysis of the Beef Alternative Merchandising cuts.

    Science.gov (United States)

    Desimone, T L; Acheson, R A; Woerner, D R; Engle, T E; Douglass, L W; Belk, K E

    2013-03-01

    The objective of this study was to generate raw and cooked nutrient composition data to identify Quality Grade differences in proximate values for eight Beef Alternative Merchandising (BAM) cuts. The data generated will be used to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Beef Rib, Oven-Prepared, Beef Loin, Strip Loin, and Beef Loin, Top Sirloin Butt subprimals were collected from a total of 24 carcasses from four packing plants. The carcasses were a combination of USDA Yield Grades 2 (n=12) and 3 (n=12), USDA Quality Grades upper two-thirds Choice (n=8), low Choice (n=8), and Select (n=8), and two genders, steer (n=16) and heifer (n=8). After aging, subprimals were fabricated into the BAM cuts, dissected, and nutrient analysis was performed. Sample homogenates from each animal were homogenized and composited for analysis of the following: proximate analysis, long chain and trans-fatty acids, conjugated linoleic acid, total cholesterol, vitamin B-12, and selenium. This study identified seven BAM cuts from all three Quality Grades that qualify for USDA Lean; seven Select cuts that qualify for USDA Extra Lean; and three Select cuts that qualify for the American Heart Association's Heart Healthy Check. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Effects of forage level in feedlot finishing diets on carcass characteristics and palatability of Jersey beef.

    Science.gov (United States)

    Arnett, E J; Fluharty, F L; Loerch, S C; Zerby, H N; Zinn, R A; Kuber, P S

    2012-03-01

    Jersey cattle are known for producing carcasses with a greater amount of marbling, but they require more days on feed to achieve acceptable market weights compared with other breeds. The objective of this study was to evaluate the effect of dietary forage (12 vs. 24% sudangrass:alfalfa hay, DM basis) in steam-flaked, corn-based finishing diets on carcass characteristics, beef palatability, and retail color stability of steaks from Jersey beef compared with conventionally fed commodity beef strip loins (COM) of identified quality (Choice(-) and Select(+)). Jersey steers (n = 77) were blocked by BW and randomly assigned to 1 of the following treatments for a 383-d trial period: Jersey low 12% (JL; n = 38) or Jersey high 24% (JH; n = 39) forage (DM basis). A comparison group was selected from conventionally fed cattle on the same day of slaughter as the Jersey treatments, and strip loins from USDA Select(+) (COM; n = 20) and Choice(-) (COM; n = 20) were removed for data analysis. Seventy-two hours postmortem, strip loins were removed, vacuum-packaged, and aged at 3°C for 18 d postmortem. After the aging period, steaks from the LM were sliced, vacuum-packaged, and frozen (-20°C) until analyzed. Jersey steaks had reduced (P forage level had minimal effects on carcass characteristics and beef palatability. However, feeding a low-forage diet decreases input cost and potentially results in a greater valued carcass. Finishing long-fed (383 d) Jersey steers can meet beef industry expectations with respect to quality grade.

  10. Consumer attitudes towards beef and acceptability of enhanced beef.

    Science.gov (United States)

    Robbins, K; Jensen, J; Ryan, K J; Homco-Ryan, C; McKeith, F K; Brewer, M S

    2003-10-01

    The objective of this study was to evaluate consumer quality characteristics of enhanced steaks and roasts derived from cattle supplemented with vitamin E during finishing, and to assess the attitudes of these consumers towards beef. Twelve steers were fed either a control (E-) diet or a diet supplemented with dl-alpha tocopheryl acetate (E+). Paired strip loins and rounds were either used as controls (C) or were pumped (P) to 110% of raw weight to contain 0.4% sodium chloride and 0.4% sodium tripolyphosphate in the final product. Consumers (n=103) evaluated roasts and steaks for juiciness, tenderness, saltiness, and overall acceptability on a 9-point hedonic scale. Enhanced steaks and roasts were more acceptable than non-enhanced controls; E+ steaks were less acceptable than E- steaks. A beef quality questionnaire revealed that color, price, visible fat and cut were the most important factors underlying beef steak purchase, while tenderness, flavor and juiciness were weighted most heavily with regard to eating satisfaction.

  11. A comparison of consumer sensory acceptance, purchase intention, and willingness to pay for high quality United States and Spanish beef under different information scenarios.

    Science.gov (United States)

    Beriain, M J; Sánchez, M; Carr, T R

    2009-10-01

    Tests were performed to identify variation across consumer evaluation ratings for 2 types of beef (Spanish yearling bull beef and US Choice and Prime beef), using 3 information levels (blind scores; muscle fat content + production conditions; and all production data including geographical origin) and 3 consumer evaluation ratings (hedonic rating, willingness to pay, and purchase intention). Further testing was carried out to assess the extent to which expert evaluations converged with those of untrained consumers. Taste panel tests involving 290 consumers were conducted in Navarra, a region in northern Spain. The beef samples were 20 loins of Pyrenean breed yearling bulls that had been born and raised on private farms located in this Spanish region and 20 strip loins from high quality US beef that ranged from high Choice to average Prime US quality grades. The Spanish beef were slaughtered at 507 +/- 51 kg of BW and 366 +/- 23 d of age. The US beef proved more acceptable to consumers and received greater ratings from the trained panel, with greater scores for juiciness (3.33), tenderness (3.33), flavor (3.46), and fat content (5.83) than for Spanish beef (2.77, 2.70, 3.14, 1.17). The differences in sensory variable rating were more pronounced for the Spanish beef than for the US beef, always increasing with the level of information. The variation in the ratings across different information levels was statistically significant in the case of the Spanish beef, whereas the variation observed in the ratings of the US beef was highly significant in the willingness of consumers to pay a premium. Consumers who appreciated greater quality were also more willing to pay for the additional level of quality.

  12. Using reflectance spectroscopy to predict beef tenderness.

    Science.gov (United States)

    Bowling, M B; Vote, D J; Belk, K E; Scanga, J A; Tatum, J D; Smith, G C

    2009-05-01

    A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.

  13. Postrigor citric acid enhancement can alter cooked color but not fresh color of dark-cutting beef.

    Science.gov (United States)

    Stackhouse, R J; Apple, J K; Yancey, J W S; Keys, C A; Johnson, T M; Mehall, L N

    2016-04-01

    In 2 experiments, dark-cutting (DC) beef strip loins were used to test the effects of citric acid-enhancement pH on visual and instrumental color of fresh and cooked steaks. In Exp. 1 and 2, each DC (mean pH = 6.57 and 6.65, respectively) and normal-pH, low USDA Choice (CH; mean pH = 5.48 and 5.51, respectively) strip loin was cut into 2 equal-length sections, and DC sections were injected to 111% of raw section weight with pH 3.5 to 5.0 (Exp. 1) or pH 2.0 to 3.5 (Exp. 2) solutions made by mixing citric acid in either 0.05% orthophosphate (PO) solution or tap water (HO) base solutions (Exp. 1) and 0.5% PO or 0.5% tripolyphosphate solution base solutions (Exp. 2). After enhancement, sections were cut into steaks, which were assigned to either 5 d of simulated retail display or cooked to 71°C for cooked color measurement. Postenhancement pH of DC steaks enhanced with pH 3.5 to 5.0 solutions did not ( ≥ 0.180) differ from that of nonenhanced DC steaks (Exp. 1) but linearly decreased ( citric acid enhancement over untreated DC steaks during the first 3 d of display, fresh steak color never ( citric acid enhancement solutions, regardless of base solution, were insufficient to improve the fresh color of DC beef; however, enhancement with pH 2.5 citric acid solutions effectively eliminated the persistent red cooked color typically associated with DC beef comparable with that of normal-pH beef.

  14. An explorative study on pork loin recognition

    DEFF Research Database (Denmark)

    Larsen, Anders Boesen Lindbo; Hviid, Marchen Sonja; Larsen, Rasmus

    2013-01-01

    Bag-of-words (BoW) image description has shown good performance for a large variety of image recognition scenarios. We investigate approaches to alleviating a standard BoW image description pipeline representations for the specific task of recognizing pork loins. Specifically, we extend the Bo...

  15. HYPNOTHERAPY INTERVENTION FOR LOIN PAIN HEMATURIA: A CASE STUDY1

    Science.gov (United States)

    Elkins, Gary R.; Koep, Lauren L.; Kendrick, Cassie E.

    2012-01-01

    Loin pain hematuria is characterized by chronic loin pain, hematuria, and dysuria. There are no known effective treatments for loin pain hematuria and longer-term use of analgesics and surgical options are often ineffective or associated with negative side effects. This article reports on a 17-year-old female patient diagnosed with loin pain hematuria who presented with unilateral, uncontrolled loin pain following numerous unsuccessful attempts at controlling her symptoms with traditional medical interventions—including antibiotics, opioids, and renal denervation. The patient received 8 sessions of hypnotherapy. Baseline, end-point, and follow-up measures administered included the General Health Questionnaire, Hospital Anxiety and Depression Scale, McGill Pain Questionnaire, Pain Discomfort Scale, and visual analogue measures of pain, academic interference, and social interference. At follow-up, results indicated clinically significant decreases in pain, anxiety, and depression with nearly complete remission of presenting symptoms. PMID:22098573

  16. Foodservice yield and fabrication times for beef as influenced by purchasing options and merchandising styles.

    Science.gov (United States)

    Weatherly, B H; Griffin, D B; Johnson, H K; Walter, J P; De La Zerda, M J; Tipton, N C; Savell, J W

    2001-12-01

    Selected beef subprimals were obtained from fabrication lines of three foodservice purveyors to assist in the development of a software support program for the beef foodservice industry. Subprimals were fabricated into bone-in or boneless foodservice ready-to-cook portion-sized cuts and associated components by professional meat cutters. Each subprimal was cut to generate mean foodservice cutting yields and labor requirements, which were calculated from observed weights (kilograms) and processing times (seconds). Once fabrication was completed, data were analyzed to determine means and standard errors of percentage yields and processing times for each subprimal. Subprimals cut to only one end point were evaluated for mean foodservice yields and processing times, but no comparisons were made within subprimal. However, those traditionally cut into various end points were additionally compared by cutting style. Subprimals cut by a single cutting style included rib, roast-ready; ribeye roll, lip-on, bone-in; brisket, deckle-off, boneless; top (inside) round; and bottom sirloin butt, flap, boneless. Subprimals cut into multiple end points or styles included ribeye, lip-on; top sirloin, cap; tenderloin butt, defatted; shortloin, short-cut; strip loin, boneless; top sirloin butt, boneless; and tenderloin, full, side muscle on, defatted. Mean yields of portion cuts, and mean fabrication times required to manufacture these cuts differed (P < 0.05) by cutting specification of the final product. In general, as the target portion size of fabricated steaks decreased, the mean number of steaks derived from any given subprimal cut increased, causing total foodservice yield to decrease and total processing time to increase. Therefore, an inverse relationship tended to exist between processing times and foodservice yields. With a method of accurately evaluating various beef purchase options, such as traditional commodity subprimals, closely trimmed subprimals, and pre-cut portion

  17. Headspace volume and percentage of carbon monoxide affects carboxymyoglobin layer development of modified atmosphere packaged beef steaks.

    Science.gov (United States)

    Raines, Christopher R; Hunt, Melvin C

    2010-01-01

    Carboxymyoglobin (COMb) development of beef Longissimus lumborum as related to molecular CO availability and package headspace volume was evaluated. Steaks from six pairs of USDA Select strip loins were packaged in modified atmosphere packages with 0.2%, 0.4%, or 0.8% CO and 30% CO(2) and balanced with N(2) to obtain meat-to-gas ratios of 0.4, 0.7, and 1.1, and CO molar concentrations of 0.07, 0.10, and 0.20 mMol. Steak redness (CIE a*), COMb layer thickness, percentage of CO in the headspace, visual display color, and bloom intensity scores were evaluated 4 and 7 d after packaging. Greater concentration of CO in a smaller headspace resulted in a thicker COMb layer compared with lesser concentration of CO in a larger headspace, regardless of moles CO available. The combined effects of concentration of CO and headspace volume had a greater impact on COMb development than millimoles of CO in the package headspace. Package headspace can be reduced and the concentration of CO can be increased without detriment to fresh beef color or consumer safety.

  18. Influence of early postmortem protein oxidation on beef quality.

    Science.gov (United States)

    Rowe, L J; Maddock, K R; Lonergan, S M; Huff-Lonergan, E

    2004-03-01

    The objective of this study was to examine the effect of early postmortem protein oxidation on the color and tenderness of beef steaks. To obtain a range of oxidation levels, the longissimus lumborum muscles (LM) from both strip loins of 20 steers fed either a finishing diet with vitamin E (1,000 IU per steer daily, minimum of 126 d [VITE]; n = 10 steers) or fed the same finishing diet without vitamin E (CON; n = 10 steers) were used. Within 24 h after slaughter, the LM muscle from each carcass was cut into 2.54-cm-thick steaks and individually vacuum packaged. Steaks from each steer were assigned to a nonirradiated group or an irradiated group. Steaks were irradiated within 26 h postmortem, and were aged at 4 degrees C for 0, 1, 3, 7, and 14 d after irradiation. Steaks from each diet/irradiation/aging time treatment were used to determine color, shear force, and degree of protein oxidation (carbonyl content). Steaks from steers fed the VITE diet had higher (P irradiation, steaks that had been irradiated had lower (P Irradiated steaks, regardless of diet, had lower a* (P irradiated steaks compared to nonirradiated steaks at 0, 1, 3, and 7 d postirradiation. Immunoblot analysis showed that vitamin E supplementation decreased the number and extent of oxidized sarcoplasmic proteins. Protein carbonyl content was positively correlated with Warner-Bratzler shear force values. These results indicate that increased oxidation of muscle proteins early postmortem could have negative effects on fresh meat color and tenderness.

  19. Beef lovers

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Pedrozo, Eugenio A.; van der Lans, Ivo A.

    2009-01-01

    In this chapter we will explore beef consumption behaviour from a cross-cultural perspective. Data collected in Brazil, Australia and the Netherlands supports the main objectives of identifying consumers' anticipated emotions, degree of involvement, attitudes and main concerns towards beef...

  20. Clinical characteristics of acute renal failure with severe loin pain and patchy renal vasoconstriction

    Directory of Open Access Journals (Sweden)

    Jeonghwan Lee

    2012-09-01

    Conclusion: ARF with severe loin pain and PRV can present with loin or abdominal pain, even without a history of anaerobic exercise. Careful history taking and appropriate imaging studies are critical in the diagnosis and management of this syndrome.

  1. Improving the lean muscle color of dark-cutting beef by aging, antioxidant-enhancement, and modified atmospheric packaging.

    Science.gov (United States)

    Wills, K M; Mitacek, R M; Mafi, G G; VanOverbeke, D L; Jaroni, D; Jadeja, R; Ramanathan, R

    2017-12-01

    The objective was to evaluate the effects of wet-aging, rosemary-enhancement, and modified atmospheric packaging on the color of dark-cutting beef during simulated retail display. No-roll dark-cutting strip loins ( = 12; pH > 6.0) were selected from a commercial packing plant within 3 d postharvest. Using a balanced incomplete block design, dark-cutting loins were sectioned in half, and assigned to 1 of 3 aging periods: 7, 14, or 21 d. After respective aging, each aged section was divided into 3 equal parts, and randomly assigned to 1 of 3 enhancement treatments: nonenhanced dark-cutting, dark-cutter enhanced with 0.1% rosemary, and dark-cutter enhanced with 0.2% rosemary. Following enhancement, steaks were randomly assigned to 1 of 3 packaging treatments: high-oxygen modified atmospheric packaging (HiOx-MAP; 80% O and 20% CO), carbon monoxide modified atmospheric packaging (CO-MAP; 0.4% CO, 69.6% N, and 30% CO), and polyvinyl chloride overwrap (PVC; 20% O). Instrumental and visual color measurements were recorded during 5 d simulated retail display. Lipid oxidation was determined utilizing the thiobarbituric acid reactive substances (TBARS) method. There was a significant packaging × enhancement × display time interaction for values and chroma ( 0.001). On d 0 of display, dark-cutting steaks enhanced with 0.1% and 0.2% rosemary and packaged in HiOx-MAP had greater ( 0.001) values and chroma than other dark-cutting packaging/enhancement treatments. A significant packaging × enhancement × display time interaction resulted for values ( 0.001). Dark-cutting steaks enhanced with 0.2% rosemary and packaged in HiOx-MAP was lighter ( 0.001; greater values) than other dark-cutting treatments on d 5 of display. There were no differences ( 0.34) in discoloration scores on d 5 among different dark-cutting treatments when steaks were packaged in HiOx- and CO-MAP. There was an aging period × enhancement × packaging interaction ( cutting steaks enhanced with 0.2% rosemary

  2. A national audit of retail lamb loin quality in Australia.

    Science.gov (United States)

    Safari, E; Channon, H A; Hopkins, D L; Hall, D G; van de Ven, R

    2002-07-01

    A retail audit of lamb loin tenderness was conducted over a 12-month period to determine the variation in tenderness of Australian lamb. Tenderness was objectively measured using Warner-Bratzler (WB) shear force. Muscle pH and cooking loss were determined on all samples and colour was measured on a sub-sample of loins. A total of 909 midloins from retail butcher shops and supermarkets located in four Australian capital cities (Sydney, Canberra, Melbourne, and Perth) were evaluated at four sampling times (December 1997 and March, June, and October 1998). Overall, 20.3% of all midloins purchased had a WB shear force value above the threshold level of 5 kg. Generic samples from Melbourne butcher shops were similar for WB shear force on average to the generic samples from Canberra and Sydney, whereas those from Melbourne supermarkets had significantly (Plamb had a greater WB shear force (Plamb. No relationship was found between price per kg and shear force (r=0.02) for loins purchased in Sydney (n=220). Price per kg differed between months (Plamb sold in the domestic market. A lamb eating quality assurance system, based on set protocols, is one approach that is currently being investigated in Australia to ensure the supply of consistently high eating quality lamb to consumers.

  3. Physicochemical and microbiological changes in irradiated fresh pork loins

    International Nuclear Information System (INIS)

    Dogbevi, M.K.; Vachon, C.; Lacroix, M.

    1999-01-01

    The effect of γ-irradiation on the physicochemical and microbiological properties of fresh pork was studied. Radiation treatments were carried out under air on fresh pork loins at doses of 2, 4 and 8 kGy and the loins were evaluated for deamidation, solubility, sulphydryl content and surface hydrophobicity. Deamidation was significantly (p⩽0.05) affected by the treatment with 98% deamidation at a dose of 8 kGy. No significant changes (p>0.05) were noted in sulphydryl content under the same conditions. The increase in deamidation resulted in a decrease in hydrophobicity and an increase in protein solubility. γ-irradiation also reduced the number of microorganisms in the meat. Mesophiles were more resistant to the irradiation treatment than psychrotrophs and Pseudomonas. All irradiated pork samples (1 or 3 kGy) had a bacterial count lower that 10(7) CFU/g after 15 days of storage. A minimal dose of 1 kGy was sufficient to increase the shelf life of fresh pork loins although variations in initial pork contamination was found to be the determining factor accounting for the effectiveness of the treatment

  4. Effect of pulsed electric field on the proteolysis of cold boned beef M. Longissimus lumborum and M. Semimembranosus.

    Science.gov (United States)

    Suwandy, Via; Carne, Alan; van de Ven, Remy; Bekhit, Alaa El-Din A; Hopkins, David L

    2015-02-01

    The effects of pulsed electric field (PEF) and ageing (3, 7, 14 and 21 days) on the shear force, protein profile, and post-mortem proteolysis of beef loins (M. Longissimus lumborum, LL) and topsides (M. Semimembranosus, SM) were investigated using a range of pulsed electric field treatments [voltages (5 and 10 kV) and frequencies (20, 50, and 90 Hz)]. PEF treatment decreased the shear force of beef LL and SM muscles by up to 19%. The reduction in the shear force in the LL was not affected by the treatment intensity whereas the reduction in the SM was dependent on PEF frequency. PEF treated beef loins showed increased proteolysis, both early post-mortem and during subsequent post-mortem storage reflected by increased degradation of troponin-T and desmin. The most prominent troponin-T degradation was found in samples treated with 5 kV-90 Hz, 10 kV-20 Hz at day 3 and day 7 post-treatment in addition to 10 kV-50 Hz in subsequent post-treatment times. The degradation of desmin in PEF treated beef loins increased with ageing time.

  5. Effects of ascorbic acid and antioxidants on color, lipid oxidation and volatiles of irradiated ground beef

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, D.U. E-mail: duahn@iastate.edu; Nam, K.C

    2004-10-01

    Beef loins with 3 different aging times after slaughter were ground, added with none, 0.1% ascorbic acid, 0.01% sesamol+0.01% {alpha}-tocopherol, or 0.1% ascorbic acid+0.01% sesamol+0.01% tocopherol. The meats were packaged in oxygen-permeable bags, irradiated at 2.5 kGy, and color, oxidation-reduction potential (ORP), lipid oxidation and volatile profiles were determined. Irradiation decreased the redness of ground beef, and visible color of beef changed from a bright red to a green/brown depending on the age of meat. Addition of ascorbic acid prevented color changes in irradiated beef, and the effect of ascorbic acid became greater as the age of meat or storage time after irradiation increased. The ground beef added with ascorbic acid had lower ORP than control, and the low ORP of meat helped maintaining the heme pigments in reduced form. During aerobic storage, S-volatiles disappeared while volatile aldehydes significantly increased in irradiated beef. Addition of ascorbic acid at 0.1% or sesamol+{alpha}-tocopherol at each 0.01% level to ground beef prior to irradiation were effective in reducing lipid oxidation and S-volatiles. As storage time increased, however, the antioxidant effect of sesamol+tocopherol in irradiated ground beef was superior to that of ascorbic acid.

  6. Effects of ascorbic acid and antioxidants on color, lipid oxidation and volatiles of irradiated ground beef

    International Nuclear Information System (INIS)

    Ahn, D.U.; Nam, K.C.

    2004-01-01

    Beef loins with 3 different aging times after slaughter were ground, added with none, 0.1% ascorbic acid, 0.01% sesamol+0.01% α-tocopherol, or 0.1% ascorbic acid+0.01% sesamol+0.01% tocopherol. The meats were packaged in oxygen-permeable bags, irradiated at 2.5 kGy, and color, oxidation-reduction potential (ORP), lipid oxidation and volatile profiles were determined. Irradiation decreased the redness of ground beef, and visible color of beef changed from a bright red to a green/brown depending on the age of meat. Addition of ascorbic acid prevented color changes in irradiated beef, and the effect of ascorbic acid became greater as the age of meat or storage time after irradiation increased. The ground beef added with ascorbic acid had lower ORP than control, and the low ORP of meat helped maintaining the heme pigments in reduced form. During aerobic storage, S-volatiles disappeared while volatile aldehydes significantly increased in irradiated beef. Addition of ascorbic acid at 0.1% or sesamol+α-tocopherol at each 0.01% level to ground beef prior to irradiation were effective in reducing lipid oxidation and S-volatiles. As storage time increased, however, the antioxidant effect of sesamol+tocopherol in irradiated ground beef was superior to that of ascorbic acid

  7. Canadian beef quality audit.

    Science.gov (United States)

    Van Donkersgoed, J; Jewison, G; Mann, M; Cherry, B; Altwasser, B; Lower, R; Wiggins, K; Dejonge, R; Thorlakson, B; Moss, E; Mills, C; Grogan, H

    1997-01-01

    A study was conducted in 4 Canadian processing plants in 1995-96 to determine the prevalence of quality defects in Canadian cattle. One percent of the annual number of cattle processed in Canada were evaluated on the processing floor and 0.1% were graded in the cooler. Brands were observed on 37% and multiple brands on 6% of the cattle. Forty percent of the cattle had horns, 20% of which were scurs, 33% were stubs, 10% were tipped, and 37% were full length. Tag (mud and manure on the hide) was observed on 34% of the cattle. Bruises were found on 78% of the carcasses, 81% of which were minor in severity. Fifteen percent of the bruises were located on the round, 29% on the loin, 40% on the rib, 16% on the chuck, and 0.02% on the brisket. Grubs were observed in 0.02% of the steers, and injection sites were observed in 1.3% of whole hanging carcasses. Seventy percent of the livers were passed for human food and 14% for pet food; 16% were condemned. Approximately 71% of the liver condemnations were due to liver abscesses. Four percent of the heads, 6% of the tongues, and 0.2% of whole carcasses were condemned. The pregnancy rate in female cattle was approximately 6.7%. The average hot carcass weight was 357 kg (s = 40) in steers, 325 kg (s = 41) in heifers, 305 kg (s = 53) in cows, 388 kg (s = 62) in virgin bulls and 340 kg (s = 39) in mature bulls. The average ribeye area in all cattle was 84 cm2 (s = 12); range 29 cm2 to 128 cm2. Grade fat was highly variable and averaged 9 mm (s = 4) for steers and heifers, 6 mm (s = 6) for cows, 5 mm (s = 1) for virgin bulls, and 4 mm (s = 0.5) for mature bulls. The average lean meat yield was 59.7% in cattle (s = 3.4); range 39% to 67%. One percent of the carcasses were devoid of marbling, 1% were dark cutters, and 0.05% of the steer carcasses were staggy. Six percent of the carcasses had poor conformation, 3.7% were underfinished, and 0.7% were overfinished. Yellow fat was observed in 4% of the carcasses; 10% of carcasses were

  8. Procedural Priorities of the Pork Loin Supply Chain

    Directory of Open Access Journals (Sweden)

    Matheus Dhein Dill

    2014-04-01

    Full Text Available The pork meat production industry is facing new challenges as a consequence of consumers’ expectations regarding the quality and safety of food products. For the present study, experts and consumers in Rio Grande do Sul State, Brazil were interviewed to identify the attributes of pork loin that need to be improved. Consumers have particular concerns about the juiciness, fibrousness, and portion size of the meat, the diversity of cuts and safety and animal welfare. The supply chain was also analyzed in order to verify the procedural priorities that need to be improved in order to meet the demands of consumers. Experts were interviewed using the quality function deployment methodology. The findings of the study indicate that, improvements must be made in the production sector in terms of animal handling and transportation. In the processing sector, improvements are required regarding slaughter control of PSE and DFD, the development of new packaging, and product fractionation. The requirements in the distribution sector relate to information campaigns for consumers to diffuse the nutritional characteristics of pork loin and in the product safety through sanitary inspection.

  9. Stripping Voltammetry

    Science.gov (United States)

    Lovrić, Milivoj

    Electrochemical stripping means the oxidative or reductive removal of atoms, ions, or compounds from an electrode surface (or from the electrode body, as in the case of liquid mercury electrodes with dissolved metals) [1-5]. In general, these atoms, ions, or compounds have been preliminarily immobilized on the surface of an inert electrode (or within it) as the result of a preconcentration step, while the products of the electrochemical stripping will dissolve in the electrolytic solution. Often the product of the electrochemical stripping is identical to the analyte before the preconcentration. However, there are exemptions to these rules. Electroanalytical stripping methods comprise two steps: first, the accumulation of a dissolved analyte onto, or in, the working electrode, and, second, the subsequent stripping of the accumulated substance by a voltammetric [3, 5], potentiometric [6, 7], or coulometric [8] technique. In stripping voltammetry, the condition is that there are two independent linear relationships: the first one between the activity of accumulated substance and the concentration of analyte in the sample, and the second between the maximum stripping current and the accumulated substance activity. Hence, a cumulative linear relationship between the maximum response and the analyte concentration exists. However, the electrode capacity for the analyte accumulation is limited and the condition of linearity is satisfied only well below the electrode saturation. For this reason, stripping voltammetry is used mainly in trace analysis. The limit of detection depends on the factor of proportionality between the activity of the accumulated substance and the bulk concentration of the analyte. This factor is a constant in the case of a chemical accumulation, but for electrochemical accumulation it depends on the electrode potential. The factor of proportionality between the maximum stripping current and the analyte concentration is rarely known exactly. In fact

  10. Consumer preferences for beef color and packaging did not affect eating satisfaction.

    Science.gov (United States)

    Carpenter, C E; Cornforth, D P; Whittier, D

    2001-04-01

    We investigated whether consumer preferences for beef colors (red, purple, and brown) or for beef packaging systems (modified atmosphere, MAP; vacuum skin pack, VSP; or overwrap with polyvinyl chloride, PVC) influenced taste scores of beef steaks and patties. To test beef color effects, boneless beef top loin steaks (choice) and ground beef patties (20% fat) were packaged in different atmospheres to promote development of red, purple, and brown color. To test effects of package type, steaks and patties were pre-treated with carbon monoxide in MAP to promote development of red color, and some meat was repackaged using VSP or PVC overwrap. The differently colored and packaged meats were separately displayed for members of four consumer panels who evaluated appearance and indicated their likelihood to purchase similar meat. Next, the panelists tasted meat samples from what they had been told were the packaging treatments just observed. However, the meat samples actually served were from a single untreated steak or patty. Thus, any difference in taste scores should reflect expectations established during the visual evaluation. The same ballot and sample coding were used for both the visual and taste evaluations. Color and packaging influenced (Ppurple >brown and PVC >VSP>MAP. Appearance scores and likelihood to purchase were correlated (r=0.9). However, color or packaging did not affect (P>0.5) taste scores. Thus, consumer preferences for beef color and packaging influenced likelihood to purchase, but did not bias eating satisfaction.

  11. Into beef consumers' mind

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Brei, Vinicius A.

    indicated similarities amongst Brazilian and Australian consumers regarding their positive attitude towards beef and main concerns regarding its consumption. Dutch consumers, although presented negative attitudes, considered beef consumption as important. In general respondents presented a high degree...

  12. Percutaneous renal sympathetic nerve ablation for loin pain haematuria syndrome.

    Science.gov (United States)

    Gambaro, Giovanni; Fulignati, Pierluigi; Spinelli, Alessio; Rovella, Valentina; Di Daniele, Nicola

    2013-09-01

    Loin pain haematuria syndrome (LPHS) is a severe renal pain condition of uncertain origin and often resistant to treatment. Nephrectomy and renal autotrasplantation have occasionally been performed in very severe cases. Its pathogenesis is controversial. A 40-year-old hypertensive lady was diagnosed with LPHS after repeated diagnostic imaging procedures had ruled out any renal, abdominal or spinal conditions to justify pain. Notwithstanding treatment with three drugs, she had frequent hypertensive crises during which the loin pain was dramatically exacerbated. Vascular causes of the pain and hypertension were investigated and excluded. Her renal function was normal. The patient was referred to a multidisciplinary pain clinic, but had no significant improvement in her pain symptoms despite the use of non-steroidal anti-inflammatory drugs, adjuvant antidepressants and opioid-like agents. The pain and the discomfort were so severe that her quality of life was very poor, and her social and professional activities were compromised. Nephrectomy and renal autotransplantation have occasionally been performed in these cases. Since visceral pain signals flow through afferent sympathetic fibres, we felt that percutaneous catheter-based radiofrequency ablation of the renal sympathetic nerve fibres (recently introduced for the treatment of drug-resistant hypertension) could be valuable for pain relief. We treated the patient with radiofrequency ablation (Medtronic Symplicity Catheter) applied only to the right renal artery. After a 6-month follow-up, the patient is pain free and normotensive with all drugs withdrawn. She has experienced no hypertensive crises in the meantime. This observation suggests that percutaneous sympathetic denervation could prove to be an effective mini-invasive strategy for the treatment of chronic renal pain, and LPHS in particular.

  13. Analysis of MRI by fractals for prediction of sensory attributes: A case study in loin

    DEFF Research Database (Denmark)

    Caballero, Daniel; Antequera, Teresa; Caro, Andrés

    2018-01-01

    This study investigates the use of fractal algorithms to analyse MRI of meat products, specifically loin, in order to determine sensory parameters of loin. For that, the capability of different fractal algorithms was evaluated (Classical Fractal Algorithm, CFA; Fractal Texture Algorithm, FTA...... was analysed. Results on this study firstly demonstrate the capability of fractal algorithms to analyse MRI from meat product. Different combinations of the analysed techniques can be applied for predicting most sensory attributes of loins adequately (R > 0.5). However, the combination of SE, OPFTA and MLR...... offered the most appropriate results. Thus, it could be proposed as an alternative to the traditional food technology methods....

  14. Environmental sustainability of beef

    Science.gov (United States)

    A national assessment of the sustainability of beef is being conducted in collaboration with the National Cattlemen’s Beef Association through the support of the Beef Checkoff. This includes surveys and visits to cattle operations throughout the U.S. to gather production information. With this infor...

  15. Pork loin quality is not indicative of fresh belly or fresh and cured ham quality.

    Science.gov (United States)

    Arkfeld, E K; Wilson, K B; Overholt, M F; Harsh, B N; Lowell, J E; Hogan, E K; Klehm, B J; Bohrer, B M; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

    2016-12-01

    The objective was to characterize the relationship between fresh loin quality with fresh belly or fresh and cured ham quality. Pigs raised in 8 barns representing 2 seasons [cold ( = 4,290) and hot ( = 3,394)] and 2 production focuses [lean ( = 3,627) and quality ( = 4,057)] were used. Carcass characteristics and other meat quality data were collected on 7,684 carcasses. All of the carcasses were evaluated for HCW, LM depth, tenth rib fat depth, leg (ham primal) weight, instrumental color on the gluteus medius and gluteus profundus of the ham face, and subjective loin quality. Instrumental loin color and ultimate pH (≥ 22 h postmortem) were collected on the ventral side of loins along with dimensions and firmness scores of fresh bellies from 50% of the carcasses. Ten percent of the boneless loins and fresh hams were evaluated for slice shear force (SSF) or cured ham characteristics. Correlation coefficients between traits were computed using the CORR procedure of SAS and considered significantly different from 0 at ≤ 0.05. Temperature decline, beginning at 31 min postmortem and concluding at 22 h postmortem, for the longissimus dorsi and semimembranosus muscles were evaluated on 10% of the carcasses. Ultimate loin pH was correlated with dimensional belly characteristics ( ≥ |0.07|; ham instrumental color ( ≥ |0.03|; ≤ 0.05), and semimembranosus ultimate pH ( = 0.33; hams. Instrumental L*on the ventral surface of the loin was related to L* on both muscles of the ham face ( ≤ 0.0001). Even though significant relationships between the loin, belly, and ham were detected, the variability in belly and ham quality explained by variability in loin quality was poor (≤ 22.09%). Compositional differences between the loin and belly may have contributed to those poor relationships. Additionally, differences in temperature declines during chilling between the loin and ham likely contributed to the weak nature of relationships. Equilibration of longissimus dorsi

  16. Effects of dietary magnesium and duration of refrigerated storage on the quality of vacuum-packaged, boneless pork loins.

    Science.gov (United States)

    Apple, J K; Davis, J R; Rakes, L K; Maxwell, C V; Stivarius, M R; Pohlman, F W

    2001-01-01

    Quality data were initially collected on 78 pork loins from crossbred pigs fed diets containing 0, 1.25 or 2.5% magnesium mica (MM). Loins were then vacuum-packaged, and randomly assigned to either 4 or 8 weeks of storage at 2°C. Dietary MM had no (P > 0.05) effect on moisture loss/retention or subjective and objective color measurements. Purge volume increased (Pwater-holding capacity of pork loins during storage, the data indicated inclusion of MM in swine diets may retard onset of oxidative rancidity in vacuum-packaged pork loins.

  17. European consumers and beef safety

    DEFF Research Database (Denmark)

    Van Wezemael, Lynn; Verbeke, Wim; Kügler, Jens Oliver

    2010-01-01

    European beef consumption has been gradually declining during the past decades, while consumers' concerns about beef safety have increased. This paper explores consumer perceptions of and interest in beef safety and beef safety information, and their role in beef safety assessment and the beef...... consumption decision making process. Eight focus group discussions were performed with a total of 65 beef consumers in four European countries. Content analysis revealed that European consumers experienced difficulties in the assessment of the safety of beef and beef products and adopted diverging uncertainty...... reduction strategies. These include the use of colour, labels, brands and indications of origin as cues signalling beef safety. In general, consumer trust in beef safety was relatively high, despite distrust in particular actors....

  18. Escherichia coli O157:H7 Outbreak Associated with Restaurant Beef Grinding.

    Science.gov (United States)

    Torso, Lauren M; Voorhees, Ronald E; Forest, Stephen A; Gordon, Andrew Z; Silvestri, Sharon A; Kissler, Bonnie; Schlackman, Jessica; Sandt, Carol H; Toma, Paul; Bachert, Joel; Mertz, Kristen J; Harrison, Lee H

    2015-07-01

    Escherichia coli O157:H7 is a common cause of foodborne illness in the United States. Beef ground at establishments regulated by the U.S. Department of Agriculture, Food Safety and Inspection Service is routinely tested for E. coli O157:H7. Prior to December 2013, boxed beef product (wholesale cuts of beef, such as beef loin, packaged into bags and boxed for shipping) was not always tested for this pathogen. Downstream processors or retailers may grind the product; and, if the ground beef is not cooked to the recommended temperature, pathogens on the exterior of the beef introduced to the interior through grinding may survive. On 18 October 2013, the Allegheny County Health Department identified two E. coli O157:H7 cases, both of whom were food handlers at restaurant A, a restaurant that ground locally produced boxed beef for hamburgers on site. Case finding was conducted through public messaging, employee surveys, and disease surveillance. All potential cases were interviewed using a standard questionnaire. A confirmed case was defined as laboratory-confirmed E. coli O157:H7 with exposure to restaurant A. A probable case was defined as a patient with compatible symptoms and exposure to restaurant A but without laboratory confirmation. All human and food isolates were characterized by pulsed-field gel electrophoresis and multilocus variable-number tandem repeat analysis. The analysis identified 14 confirmed and 10 probable cases of E. coli; 18 nonintact ground beef samples tested positive for E. coli O157:H7. Nine confirmed cases were restaurant A employees. All confirmed cases recalled eating a restaurant A hamburger in the 10 days before illness onset; most cases reported consuming medium to rare hamburgers. Multiple pulsed-field gel electrophoresis and multilocus variable-number tandem repeat analysis patterns were identified among both the human and ground beef isolates, and the patient isolates matched those found in ground beef samples. Restaurant A

  19. Consumer perceptions of beef healthiness

    DEFF Research Database (Denmark)

    Van Wezemael, Lynn; Verbeke, Wim; Dutra de Barcellos, Marcia

    2010-01-01

    of beef consumed. Focus group participants were not in favour of improving beef healthiness during processing, but rather focussed on appropriate consumption behaviour and preparation methods. CONCLUSIONS: The individual responsibility for health implies that consumers should be able to make correct......BACKGROUND: Consumer perception of the healthiness of beef is an important determinant of beef consumption. However, little is known about how consumers perceive the healthiness of beef. The aim of this study is to shed light on the associations between beef and health. METHODS: Eight focus group...... as well as negative effects of beef consumption on their health. Labelled, branded, fresh and lean beef were perceived as signalling healthful beef, in contrast with further processed and packaged beef. Consumers felt that their individual choices could make a difference with respect to the healthiness...

  20. Analysis of volatile organic compounds and sensory characteristics of pork loin samples irradiated to high doses

    International Nuclear Information System (INIS)

    Hou Zhengchi; Sun Dakuan; Qin Zongying; Jin Jiang; Zhu Liandi; Yao Side; Sheng Kanglong

    2005-01-01

    Fresh pork loin samples, protein enzyme inactivated at (72 ± 3) degree C and vacuum packaged, were irradiated to up to 45 kGy at -20 degree C by 60 Co γ-rays. The irradiated samples were examined by various kinds of method to study high dose irradiation effects of sensory changes (meat color and off-odor), transverse shearing strength, weight loss in steam cooking, volatile organic compounds, and lipid oxidation. The results showed that the high dose irradiation produced no serious effects to the pork loin samples, and volunteer responses showed fine acceptability to the irradiated meat. (authors)

  1. Effect of low dose irradiation of pork loins on the microflora, sensory characteristics and fat stability

    International Nuclear Information System (INIS)

    Mattison, M.L.; Kraft, A.A.; Olson, D.G.; Walker, H.W.; Rust, R.E.; James, D.B.

    1986-01-01

    The effects of low dose (100 krad) irradiation on microflora, sensory characteristics, and development of oxidative rancidity of vacuum packaged pork loins was investigated after irradiation and during low temperature (4 0 C) storage up to 21 days. Irradiation reduced numbers of mesophiles, psychrotrophs, anaerobic bacteria (P<0.01), and staphylococci (P<0.05), with the effect on mesophiles and psychrotrophic spoilage organisms the greatest. Effect of irradiation on sensory characteristics of pork loin was minimal with no detectable differences between irradiated and nonirradiated pork after 14 days of storage. Irradiation of pork did not affect cooking loss or thiobarbituric acid values

  2. Varicose vein stripping

    Science.gov (United States)

    ... stripping; Venous reflux - vein stripping; Venous ulcer - veins Patient Instructions Surgical wound care - open Varicose veins - what to ask your doctor Images Circulatory system References American Family Physician. Management of varicose veins. www.aafp.org/afp/2008/ ...

  3. The study of heavy metals and microbial content in beef bowel and red meat

    International Nuclear Information System (INIS)

    Harsojo; Darsono

    2013-01-01

    Indonesia's population has increased every year so the need for food increased, especially the availability of nutritious foods such as red meat. Red meat is one of the foods that contain sufficient elements of protein, but it was likely to contain heavy metals and bacterial contamination that has met the threshold standards. On the otherhand, beef bowels are very popular among Indonesian consumers, but many heavy metlas could accumulated into the bowels. The purpose of this research are to study the content of heavy metals and bacterial contamination on beef bowel from some places of slaughtering houses and some red meats from the market in Jakarta. The beef bowels are lung, tripe, intestine and liver while the red meats were veal and tender loin. Parameter of heavy metals measured are As, Cd and Hg, while for the initial bacterial contamination are total number of aerobic bacteria, total amount of coliform, Escherichia coli, Staphylococcus sp and Salmonella contamination. The heavy metals were analyzed using Neutron Activation Analysis, and for the total number of bacteria is using Total Plate Count. Result of research shows the As content in lung and tripe as well as the mercuric content in bowel has exceeded in the normal level such as 1.0 and 0.03 ppm, respectively. On the other hand, no heavy metals were detected in all red meats. The total microbes in beef bowel have exceeded allowable limit (1.0 x 10 6 cfu/g). No Salmonella was detected in all beef bowels and red meats observed. Nuclear technique are very helpful analysis of the heavy metas content in bowel dan red meats beef. The cleanliness slaughtering house of animals are remarkably ascertaining the quality of the beef bowel and red meats who will be sent. (author)

  4. BEEF MARKET IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Elena SOARE

    2015-04-01

    Full Text Available This scientific paper presents the cattle market dynamics in Romania during 2007-2013. In order to realize this research there were used certain indicators, as following: herds of cattle, realized beef production, selling price, human consumption, import and export. The data were collected from the Ministry of Agriculture and Rural Development, National Institute of Statistics and Faostat. During the analysis, the presented indicators were modified from a period to another, because of both internal and external factors. Consumption demand is being influenced by: beef price, beef quality, price of other meat categories, consumers incomes, population’s food consumption pattern and so on.

  5. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Science.gov (United States)

    Górska, Ewa; Nowicka, Katarzyna; Jaworska, Danuta; Przybylski, Wiesław; Tambor, Krzysztof

    2017-01-01

    Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME) and gas chromatography–mass spectrometry (GC–MS). For sensory assessment, the quantitative descriptive analysis (QDA) method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively). The dominant compounds were: aromatic hydrocarbon (toluene); alkanes (hexane, heptane, and 2,2,4-trimethylpentane); aldehyde (hexanal); alcohol (2-furanmethanol); ketone (3-hydroxy-2-butanone); phenol (guaiacol); and terpenes (eucalyptol, cymene, γ-terpinen, and limonene). Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production. PMID:27456422

  6. Relationship between sensory attributes and volatile compounds of polish dry-cured loin

    Directory of Open Access Journals (Sweden)

    Ewa Górska

    2017-05-01

    Full Text Available Objective The aim of this work was to determine the relationship between objective sensory descriptors and volatile flavour compound composition of Polish traditional dry-cured loin. Methods The volatile compounds were investigated by using solid phase microextraction (SPME and gas chromatography–mass spectrometry (GC–MS. For sensory assessment, the quantitative descriptive analysis (QDA method was used. Results A total of 50 volatile compounds were found and assigned to 17 chemical families. Most of the detected volatile compounds derived from smoking, lipid oxidative reactions and seasoning (46.8%, 21.7%, and 18.9%, respectively. The dominant compounds were: aromatic hydrocarbon (toluene; alkanes (hexane, heptane, and 2,2,4-trimethylpentane; aldehyde (hexanal; alcohol (2-furanmethanol; ketone (3-hydroxy-2-butanone; phenol (guaiacol; and terpenes (eucalyptol, cymene, γ-terpinen, and limonene. Correlation analysis showed that some compounds derived from smoking were positively correlated with the intensity of cured meat odour and flavour and negatively with the intensity of dried meat odour and flavour, while terpenes were strongly correlated with odour and flavour of added spices. Conclusion The analysed dry-cured loins were characterized by specific and unique sensory profile. Odour and flavour of studied loins was mainly determined by volatile compounds originating from smoking, seasoning and lipid oxidation. Obtained results suggest that smoking process is a crucial stage during Polish traditional dry-cured loins production.

  7. Expression of porcine myosin heavy chain 1 gene in Berkshire loins ...

    African Journals Online (AJOL)

    Expression of porcine myosin heavy chain 1 gene in Berkshire loins with a high pH24 value. Jin Hun Kang, Woo Young Bang, Eun Jung Kwon, Yong Hwa Lee, Da Hye Park, Eun Seok Cho, Min Ji Kim, Jong-Soon Choi, Hwa Chun Park, Beom Young Park, Chul Wook Kim ...

  8. The Impact of Ripening Time on Technological Quality Traits, Chemical Change and Sensory Characteristics of Dry-cured Loin

    Directory of Open Access Journals (Sweden)

    Pil Nam Seong

    2015-05-01

    Full Text Available The effect of ripening time on the technological quality traits, fatty acid compositions and sensory characteristics of dry-cured loin was studied. Pork loins (n = 102 at 24 h post-mortem were used to produce dry-cured loins. The dry-cured loins were assessed at 30, 60, and 90 days of ripening for the aforementioned characteristics. Our results showed that the water activity (aw decreased (p<0.05 up to 60 days and did not change thereafter. The lipid oxidation and weight loss levels significantly (p<0.05 increased with increased ripening time. The Commission Internationale de l’Eclairage (CIE L* decreased for 90 days while CIE a* increased for 60 days and did not increase thereafter. More noticeably, the levels of most of unsaturated fatty acids and total polyunsaturated fatty acids significantly decreased as increasing ripening time up to 90 days. The 30 days-ripened loins had lower (p<0.05 color, flavor and overall acceptability scores than the loins ripened for 60 and 90 days, however, no differences in sensory traits occurred between the 60 and 90 day-ripened samples. Based on the results obtained in the present study, it is suggested that the ripening duration between 30 and 60 days could be more appropriate for producing dry-cured loin product with higher quality and economic benefits.

  9. Effect of hot carcass weight on loin, ham, and belly quality from pigs sourced from a commercial processing facility,.

    Science.gov (United States)

    Harsh, B N; Arkfeld, E K; Mohrhauser, D A; King, D A; Wheeler, T L; Dilger, A C; Shackelford, S D; Boler, D D

    2017-11-01

    The objective was to determine the predictive abilities of HCW for loin, ham, and belly quality of 7,684 pigs with carcass weights ranging from 53.2 to 129.6 kg. Carcass composition, subjective loin quality, and ham face color were targeted on all carcasses, whereas in-plant instrumental loin color and belly quality were assessed on 52.0 and 47.5% of carcasses, respectively. Loin chop slice shear force (SSF), cured ham quality, and adipose iodine value (IV) were evaluated on at least 10% of the population. The slope of regression lines and coefficients of determination between HCW and quality traits were computed using PROC REG of SAS and considered significant at ≤ 0.05. As HCW increased, boneless loins became darker and redder, evidenced by lower L* (β = -0.0243, color score (β = 0.0024, ham face color ( ham face L* values and 0.47% of the variability in a* values. Heavier carcasses produced thicker and firmer bellies, with HCW accounting for 37.81% of the variability in belly thickness (β = 0.0272, ham quality explained by HCW was poor (≤5.60%), suggesting that HCW is a poor predictor of the primal quality of pigs within this weight range. Nonetheless, HCW was a moderate predictor of belly quality traits. The findings of this study suggest that increasing HCW did not compromise loin, ham, or belly quality attributes.

  10. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin

    OpenAIRE

    Kim, Yiseul; Hong, Geun-Pyo

    2016-01-01

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4? for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4?. Despite that SSF was conducted with the ...

  11. The Strip Module

    DEFF Research Database (Denmark)

    Pedersen, Tommy

    1996-01-01

    When the behaviour of a ship in waves is to be predicted it is convenient to have a tool which includes different approaches to the problem.The aim of this project is to develop such a tool named the strip theory module. The strip theory module will consist of submodules dependent on the I...

  12. Science Comic Strips

    Science.gov (United States)

    Kim, Dae Hyun; Jang, Hae Gwon; Shin, Dong Sun; Kim, Sun-Ja; Yoo, Chang Young; Chung, Min Suk

    2012-01-01

    Science comic strips entitled Dr. Scifun were planned to promote science jobs and studies among professionals (scientists, graduate and undergraduate students) and children. To this end, the authors collected intriguing science stories as the basis of scenarios, and drew four-cut comic strips, first on paper and subsequently as computer files.…

  13. Anatomy Comic Strips

    Science.gov (United States)

    Park, Jin Seo; Kim, Dae Hyun; Chung, Min Suk

    2011-01-01

    Comics are powerful visual messages that convey immediate visceral meaning in ways that conventional texts often cannot. This article's authors created comic strips to teach anatomy more interestingly and effectively. Four-frame comic strips were conceptualized from a set of anatomy-related humorous stories gathered from the authors' collective…

  14. Microbiological quality and safety of Skipjack tuna loins (Katsuwonus Pelamis intented for canning

    Directory of Open Access Journals (Sweden)

    Francesco Casalinuovo

    2018-03-01

    Full Text Available Tuna is a food widely consumed fresh and canned as well. After catching and filleting, a pre-cooking step is normally followed by freezing and shipping to canning industry as loins. The aim of this paper was to assess the microbiological quality and safety of tuna loins (50 samples imported by an Italian canned tuna producer from two different FAO fishing areas. Total bacterial count (TBC, Coliforms, Enterobacteriaceae, Escherichia coli, Listeria monocytogenes, Salmonella, Staphylococcus aureus, Vibrio parahaemolyticus, Vibrio cholera, pH measurement, S. aureus enterotoxin and histamine levels were evaluated. Significant differences were evidenced for TBC, Enterobacteriaceae, E. coli, Coliforms and pH between fishing areas. Staphylococcus aureus was detected in all the samples tested at 1 to 3 Log cfu/g; Staphylococcus warneri, S. saprophyticus, S. epidermidis, S. hominis, S. intermedius, S. vitulinus and S. sciuri were also identified. Listeria monocytogenes, Salmonella, Vibrio parahaemolyticus, Vibrio cholera and Staphylococcus aureus enterotoxin were not detected. Histamine ranged between 0 to 5 mg/kg. The tuna loins analysed in this paper have to be considered safe; staphylococci presence represents a possible concern and has to been taken in account when risk analysis is carried out.

  15. Prediction of pork loin quality using online computer vision system and artificial intelligence model.

    Science.gov (United States)

    Sun, Xin; Young, Jennifer; Liu, Jeng-Hung; Newman, David

    2018-06-01

    The objective of this project was to develop a computer vision system (CVS) for objective measurement of pork loin under industry speed requirement. Color images of pork loin samples were acquired using a CVS. Subjective color and marbling scores were determined according to the National Pork Board standards by a trained evaluator. Instrument color measurement and crude fat percentage were used as control measurements. Image features (18 color features; 1 marbling feature; 88 texture features) were extracted from whole pork loin color images. Artificial intelligence prediction model (support vector machine) was established for pork color and marbling quality grades. The results showed that CVS with support vector machine modeling reached the highest prediction accuracy of 92.5% for measured pork color score and 75.0% for measured pork marbling score. This research shows that the proposed artificial intelligence prediction model with CVS can provide an effective tool for predicting color and marbling in the pork industry at online speeds. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Effect of ageing time on consumer-perceived quality of Italian Simmental beef

    Directory of Open Access Journals (Sweden)

    Luisa Antonella Volpelli

    2010-01-01

    Full Text Available The aim of the experiment was to provide an objective indication on the optimal ageing time of meat from ItalianSimmental (IS young bulls, the most important commercial category of the breed. The research was carried out on 10young bulls slaughtered at the average weight of 688 kg (SE: 7.3 kg. The right side of each carcass was stored for 7days and the left one for further 7 days, at normal refrigeration temperatures. At the end of the ageing period, the sideswere sampled at the loin for meat pH, color, cooking loss and shear force measurement. A central location, affective testinvolving 74 consumers was carried out to measure the degree of liking for grilled beef aged 7 or 14 days.The pH and color parameters were not significantly affected by the duration of post-mortem storage, while cooking lossincreased (31.4 vs 32.6 %; Pincreased from 7 to 14 days. The degree of liking by the untrained respondents for the two types of cooked meat wasdifferent, considering that consumers gave the highest hedonistic scores to beef aged 14 days. Tenderness was the sensoryattribute that allowed the best discrimination between beef stored for periods of different length. In fact, while thedifference between 14-day-aged and 7-day-aged beef for flavour ratings (7.0 vs 6.9 did not reach the threshold of significance,the former meat was perceived as significantly finer than the latter regarding tenderness (6.5 vs 5.6; P= 0.01and marginally preferred in overall terms (6.9 vs 6.5; P= 0.07. The classification test, carried out at the end of the quantitativetest by asking consumers to select from a list the most appropriate attributes describing the stimuli associatedwith meat consumption, confirmed the effectiveness of texture attributes in ranking different-aged beef acceptability. Infact, the number of ticks reported for chewiness and juiciness descriptors were different for the two types of meat: the14-day-aged beef was perceived as easier to chew (57 vs 34 ticks

  17. National Beef Tenderness Survey-2010: Warner-Bratzler shear force values and sensory panel ratings for beef steaks from United States retail and food service establishments.

    Science.gov (United States)

    Guelker, M R; Haneklaus, A N; Brooks, J C; Carr, C C; Delmore, R J; Griffin, D B; Hale, D S; Harris, K B; Mafi, G G; Johnson, D D; Lorenzen, C L; Maddock, R J; Martin, J N; Miller, R K; Raines, C R; VanOverbeke, D L; Vedral, L L; Wasser, B E; Savell, J W

    2013-02-01

    The tenderness and palatability of retail and food service beef steaks from across the United States (12 cities for retail, 5 cities for food service) were evaluated using Warner-Bratzler shear (WBS) and consumer sensory panels. Subprimal postfabrication storage or aging times at retail establishments averaged 20.5 d with a range of 1 to 358 d, whereas postfabrication times at the food service level revealed an average time of 28.1 d with a range of 9 to 67 d. Approximately 64% of retail steaks were labeled with a packer/processor or store brand. For retail, top blade had among the lowest (P 0.05) in WBS values between moist-heat and dry-heat cookery methods for the top round and bottom round steaks or between enhanced (contained salt or phosphate solution) or nonenhanced steaks. Food service top loin and rib eye steaks had the lowest (P food service top loin steaks received among the greatest (P food service rib eye steaks received the greatest ratings (P food service steaks were greater (P Choice, and Low Choice groups. The WBS values and sensory ratings were comparable to the last survey, signifying that no recent or substantive changes in tenderness have occurred.

  18. The Honeycomb Strip Chamber

    International Nuclear Information System (INIS)

    Graaf, Harry van der; Buskens, Joop; Rewiersma, Paul; Koenig, Adriaan; Wijnen, Thei

    1991-06-01

    The Honeycomb Strip Chamber (HSC) is a new position sensitive detector. It consists of a stack of folded foils, forming a rigid honeycomb structure. In the centre of each hexagonal cell a wire is strung. Conducting strips on the foils, perpendicular to the wires, pick up the induced avalanche charge. Test results of a prototype show that processing the signals form three adjacent strips nearest to the track gives a spatial resolution better than 64 μm for perpendicular incident tracks. The chamber performance is only slightly affected by a magnetic field. (author). 25 refs.; 21 figs

  19. Tapeworm infection - beef or pork

    Science.gov (United States)

    Teniasis; Pork tapeworm; Beef tapeworm; Tapeworm; Taenia saginata; Taenia solium; Taeniasis ... undercooked meat of infected animals. Cattle usually carry Taenia saginata ( T saginata ). Pigs carry Taenia solium (T ...

  20. Effect of Mixing Ratio between Pork Loin and Chicken Breast on Textural and Sensory Properties of Emulsion Sausages

    Science.gov (United States)

    2014-01-01

    This study is conducted to evaluate the effects of the mixing ratio between pork loin and chicken breast for textural and sensory properties of emulsion sausages. Meat homogenates are prepared by using five mixing ratios between pork loin and chicken breast (100:0, 70:30, 50:50, 30:70, and 0:100), and the emulsion sausages are also formulated with five mixing ratios. The additions of chicken breast increase the salt soluble protein solubility due to high pH levels of chicken breast, thereby resulting in the reduction of cooking losses. In addition, the apparent viscosity of meat homogenates increase with increasing amounts of chicken breast. In terms of emulsion sausages formulated with pork loin and chicken breast, the addition of chicken breast above 50% may contribute to a softer and more flexible texture of emulsion sausages. For sensory evaluations, an increase in the added amount of chicken breast contributes to a rich umami taste and deeper flavor within the emulsion sausages, resulting in the high overall acceptance score for the formulation of 0-30% pork loin and 70-100% chicken breast. Therefore, the optimal mixing ratios between pork loin and chicken breast are 0-30% and 70-100% for enhancing the textural and sensory properties of emulsion sausages. PMID:26760930

  1. Effects of self-carbon dioxide-generation material for active packaging on pH, water-holding capacity, meat color, lipid oxidation and microbial growth in beef during cold storage.

    Science.gov (United States)

    Lee, Seung-Jae; Lee, Seung Yun; Kim, Gap-Don; Kim, Geun-Bae; Jin, Sang Keun; Hur, Sun Jin

    2017-08-01

    Active packaging refers to the mixing of additive agents into packaging materials with the purpose of maintaining or extending food product quality and shelf life. The aim of this study was to develop an easy and cheap active packaging for beef. Beef loin samples were divided into three packaging groups (C, ziplock bag packaging; T1, vacuum packaging; T2, active packaging) and stored at 4 °C for 21 days. The water-holding capacity was significantly (P packaging using self-CO 2 -generation materials can extend the shelf life similarly to that observed with vacuum packaging, and that the active packaging method can improve the quality characteristics of beef during cold storage. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  2. Changes in microflora and other characteristics of vacuum-packaged pork loins irradiated at 3.0 kGy

    International Nuclear Information System (INIS)

    Lebepe, S.; Molins, R.A.; Charoen, S.P.; Farrar, H. IV; Skowronski, R.P.

    1990-01-01

    Effects of 3.0-kGy irradiation on microflora and other attributes of fresh, vacuum-packaged pork loins were examined during storage (2-4 degrees C, 98 days) and mishandling (24-25 degrees C, 24 and 48 hr). Shelf life of pork chops from irradiated loins was determined at 5 degrees C. Irradiated loins kept at 2-4 degrees C tested negative for Salmonella spp., Campylobacter spp., Clostridium perfringens and Staphylococcus aureus. Yersinia spp., was detected in pork chops held at 5 degrees C; this organism, C. perfringens and Aeromonas spp. were present in abused samples. In two irradiated samples Listeria monocytogenes was found. Irradiation reduced aerobic, anaerobic and Aeromonas spp. counts; lactobacilli were least affected. Chemical spoilage began after 91 days at 2-4 degrees C. With irradiation, TBA values were unaffected but Hunter a color values increased

  3. The effect of sex, carcass mass, back fat thickness and lean meat content on pork ham and loin characteristics

    Directory of Open Access Journals (Sweden)

    D. Knecht

    2016-01-01

    P  ≤ 0.01. Half-carcass mass showed a strong negative correlation with bone content in ham and loin (r = −0.35 and r = −0.21, respectively. Back fat thickness and meat content strongly and inversely correlated with the content of ham and loin in half-carcasses (r = −0.41 and r = 0.59 for back fat thickness; r = 0.66 and r = −0.57 for lean meat content. Close and inverse correlations of back fat thickness and lean meat content were observed with regard to their content in ham and loin (P  ≤ 0.01.

  4. 9 CFR 319.313 - Beef with gravy and gravy with beef.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Beef with gravy and gravy with beef. 319.313 Section 319.313 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF... Dehydrated Meat Food Products § 319.313 Beef with gravy and gravy with beef. “Beef with Gravy” and “Gravy...

  5. Beef Cattle: Selection and Evaluation.

    Science.gov (United States)

    Clemson Univ., SC. Vocational Education Media Center.

    Designed for secondary vocational agriculture students, this text provides an overview of selecting and evaluating beef cattle in Future Farmers of America livestock judging events. The first of four major sections addresses topics such as the ideal beef animal, selecting steers, selecting breeding animals, studying the animal systematically, and…

  6. Volatile compound profile of sous-vide cooked lamb loins at different temperature-time combinations.

    Science.gov (United States)

    Roldán, Mar; Ruiz, Jorge; Del Pulgar, José Sánchez; Pérez-Palacios, Trinidad; Antequera, Teresa

    2015-02-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60 and 80°C) and time (6 and 24h) to assess the effect on the volatile compound profile. Major chemical families in cooked samples were aliphatic hydrocarbons and aldehydes. The volatile compound profile in sous-vide cooked lamb loin was affected by the cooking temperature and time. Volatile compounds arising from lipid oxidation presented a high abundance in samples cooked at low or moderate cooking conditions (60°C for 6 and 24h, 80°C for 6h), while a more intense time and temperature combination (80°C for 24h) resulted on a higher concentration of volatile compounds arising from Strecker degradations of amino acids, as 2-methylpropanal and 3-methylbutanal. Therefore, sous-vide cooking at moderately high temperatures for long times would result in the formation of a stronger meaty flavor and roast notes in lamb meat. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Science.gov (United States)

    García-Márquez, I.; Ordóñez, J. A.; Cambero, M. I.; Cabeza, M. C.

    2012-01-01

    The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse) has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C), the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing. PMID:23227053

  8. Use of E-Beam for Shelf-Life Extension and Sanitizing of Marinated Pork Loin

    Directory of Open Access Journals (Sweden)

    I. García-Márquez

    2012-01-01

    Full Text Available The effectiveness of E-beam radiation to extend the shelf-life of marinated pork loin slices stored at 4 and 8°C (temperature abuse has been studied. The shelf-life was extended from 7 to 16 and >20 days after the application of 1 and 2 kGy, respectively. In the event of a temperature abuse occuring during the product distribution (e.g., increase to 8°C, the shelf-life would be extended from 5 to 10 and 16 days, respectively, when applying the doses mentioned previously. From a public health point of view, the irradiation of marinated pork loin may be marketable for a longer period of time of up to two weeks, and guarantees a practically Salmonella and Listeria-free product. Minor changes are produced by the E-beam treatment in the main sensory and rheological characteristics. The odor was the most affected feature, but the off-odors diminished with increased storage. In any case, testers judged the samples to be adequate for marketing.

  9. micro strip gas chamber

    CERN Multimedia

    1998-01-01

    About 16 000 Micro Strip Gas Chambers like this one will be used in the CMS tracking detector. They will measure the tracks of charged particles to a hundredth of a millimetre precision in the region near the collision point where the density of particles is very high. Each chamber is filled with a gas mixture of argon and dimethyl ether. Charged particles passing through ionise the gas, knocking out electrons which are collected on the aluminium strips visible under the microscope. Such detectors are being used in radiography. They give higher resolution imaging and reduce the required dose of radiation.

  10. Effects of conventional and grass-feeding systems on the nutrient composition of beef.

    Science.gov (United States)

    Leheska, J M; Thompson, L D; Howe, J C; Hentges, E; Boyce, J; Brooks, J C; Shriver, B; Hoover, L; Miller, M F

    2008-12-01

    The objectives of this study were to determine the nutrient composition of grass-fed beef in the United States for inclusion in the USDA National Nutrient Database for Standard Reference, and to compare the fatty acid composition of grass-fed and conventionally fed (control) beef. Ground beef (GB) and strip steaks (SS) were collected on 3 separate occasions from 15 grass-fed beef producers that represented 13 different states, whereas control beef samples were collected from 3 regions (Ohio, South Dakota, and Texas) of the United States on 3 separate occasions. Concentrations of minerals, choline, vitamin B(12), and thiamine were determined for grass-fed beef samples. Grass-fed GB samples had less Mg, P, and K (P < 0.05), and more Na, Zn, and vitamin B(12) (P < 0.05) than SS samples. Fat color, marbling, and pH were assessed for grass-fed and control SS. Subjective evaluation of the SS indicated that grass-fed beef had fat that was more yellow in color than control beef. Percentages of total fat, total cholesterol, and fatty acids along with trans fatty acids and CLA were determined for grass-fed and control SS and GB. Grass-fed SS had less total fat than control SS (P = 0.001), but both grass-fed and control SS were considered lean, because their total fat content was 4.3% or less. For both GB and SS, grass-fed beef had significantly less (P = 0.001 and P = 0.023, respectively) content of MUFA and a greater content of SFA, n-3 fatty acids, CLA, and trans-vaccenic acid than did the control samples. Concentrations of PUFA, trans fatty acids, n-6 fatty acids, and cholesterol did not differ between grass-fed and control ground beef. Trans-vaccenic acid (trans-11 18:1) made up the greatest concentration of the total trans fats in grass-fed beef, whereas CLA accounted for approximately 15% of the total trans fats. Although the fatty acid composition of grass-fed and conventionally fed beef was different, conclusions on the possible effects of these differences on human

  11. Selective chemical stripping

    Science.gov (United States)

    Malavallon, Olivier

    1995-04-01

    At the end of the 80's, some of the large European airlines expressed a wish for paint systems with improved strippability on their aircraft, allowing the possibility to strip down to the primer without altering it, using 'mild' chemical strippers based on methylene chloride. These improvements were initially intended to reduce costs and stripping cycle times while facilitating rapid repainting, and this without the need to change the conventionally used industrial facilities. The level of in-service performance of these paint systems was to be the same as the previous ones. Requirements related to hygiene safety and the environment were added to these initial requirements. To meet customers' expectations, Aerospatiale, within the Airbus Industry GIE, formed a work group. This group was given the task of specifying, following up the elaboration and qualifying the paint systems allowing requirements to be met, in relation with the paint suppliers and the airlines. The analysis made in this report showed the interest of transferring as far upstream as possible (to paint conception level) most of the technical constraints related to stripping. Thus, the concept retained for the paint system, allowing selective chemical stripping, is a 3-coat system with characteristics as near as possible to the previously used paints.

  12. ALICE Silicon Strip Detector

    CERN Multimedia

    Nooren, G

    2013-01-01

    The Silicon Strip Detector (SSD) constitutes the two outermost layers of the Inner Tracking System (ITS) of the ALICE Experiment. The SSD plays a crucial role in the tracking of the particles produced in the collisions connecting the tracks from the external detectors (Time Projection Chamber) to the ITS. The SSD also contributes to the particle identification through the measurement of their energy loss.

  13. Strip interpolation in silicon and germanium strip detectors

    International Nuclear Information System (INIS)

    Wulf, E. A.; Phlips, B. F.; Johnson, W. N.; Kurfess, J. D.; Lister, C. J.; Kondev, F.; Physics; Naval Research Lab.

    2004-01-01

    The position resolution of double-sided strip detectors is limited by the strip pitch and a reduction in strip pitch necessitates more electronics. Improved position resolution would improve the imaging capabilities of Compton telescopes and PET detectors. Digitizing the preamplifier waveform yields more information than can be extracted with regular shaping electronics. In addition to the energy, depth of interaction, and which strip was hit, the digitized preamplifier signals can locate the interaction position to less than the strip pitch of the detector by looking at induced signals in neighboring strips. This allows the position of the interaction to be interpolated in three dimensions and improve the imaging capabilities of the system. In a 2 mm thick silicon strip detector with a strip pitch of 0.891 mm, strip interpolation located the interaction of 356 keV gamma rays to 0.3 mm FWHM. In a 2 cm thick germanium detector with a strip pitch of 5 mm, strip interpolation of 356 keV gamma rays yielded a position resolution of 1.5 mm FWHM

  14. Effect of the type of frying culinary fat on volatile compounds isolated in fried pork loin chops by using SPME-GC-MS.

    Science.gov (United States)

    Ramírez, María Rosario; Estévez, Mario; Morcuende, David; Cava, Ramón

    2004-12-15

    The effect of the type of frying culinary fat (olive oil, sunflower oil, butter, and pig lard) on volatile compounds isolated from fried pork loin chops (m. Longissimus dorsi) was measured by SPME-GC-MS. Frying modified the fatty acid composition of lipids from pork loin chops, which tended to be similar to that of the culinary fat used to fry. Volatile compounds formed from the oxidation of fatty acids increased, such as aldehydes, ketones, alcohols, and hydrocarbons. Besides, each culinary fat used modified the volatile profiles in fried meat differently. Sunflower oil-fried pork loin chops presented the highest aldehyde aliphatic content, probably due to their highest content of polyunsaturated acids. Hexanal, the most abundant aldehyde in fried samples, presented the most elevated content in sunflower oil-fried pork loin chops. In addition, these samples presented more heterocyclic compounds from the Maillard reaction than other fried samples. Volatiles detected in olive oil-fried pork loin chops were mainly lipid-derived compounds such as pentan-1-ol, hexanal, hept-2-enal, nonanal, decanal, benzaldehyde, and nonan-2-one. Butter-fried pork loins were abundant in ketones with a high number of carbons (heptan-2-one, nonan-2-one, undecan-2-one, tridecanone, and heptadecan-2-one). Pig lard-fried pork loin chops presented some Strecker aldehydes isolated in only these samples, such as 2-methylbutanal and 3-(methylthio)propanal, and a sulfur compound (dimethyl disulfide) related to Strecker aldehydes.

  15. Prediction of intramuscular fat levels in Texel lamb loins using X-ray computed tomography scanning.

    Science.gov (United States)

    Clelland, N; Bunger, L; McLean, K A; Conington, J; Maltin, C; Knott, S; Lambe, N R

    2014-10-01

    For the consumer, tenderness, juiciness and flavour are often described as the most important factors for meat eating quality, all of which have a close association with intramuscular fat (IMF). X-ray computed tomography (CT) can measure fat, muscle and bone volumes and weights, in vivo in sheep and CT predictions of carcass composition have been used in UK sheep breeding programmes over the last few decades. This study aimed to determine the most accurate combination of CT variables to predict IMF percentage of M. longissimus lumborum in Texel lambs. As expected, predicted carcass fat alone accounted for a moderate amount of the variation (R(2)=0.51) in IMF. Prediction accuracies were significantly improved (Adj R(2)>0.65) using information on fat and muscle densities measured from three CT reference scans, showing that CT can provide an accurate prediction of IMF in the loin of purebred Texel sheep. Copyright © 2014. Published by Elsevier Ltd.

  16. Ground Beef and Food Safety

    Science.gov (United States)

    ... 4 days. If frozen, it should keep its quality for about 4 months. When reheating fully cooked patties or casseroles containing ground beef, be sure the internal temperature reaches 165 °F (73.9 °C). Why ...

  17. Photosensitive Strip RETHGEM

    CERN Document Server

    Peskov, Vladimir; Nappi, E.; Oliveira, R.; Paic, G.; Pietropaolo, F.; Picchi, P.

    2008-01-01

    An innovative photosensitive gaseous detector, consisting of a GEM like amplification structure with double layered electrodes (instead of commonly used metallic ones) coated with a CsI reflective photocathode, is described. In one of our latest designs, the inner electrode consists of a metallic grid and the outer one is made of resistive strips; the latter are manufactured by a screen printing technology on the top of the metallic strips grid The inner metallic grid is used for 2D position measurements whereas the resistive layer provides an efficient spark protected operation at high gains - close to the breakdown limit. Detectors with active areas of 10cm x10cm and 10cm x20cm were tested under various conditions including the operation in photosensitive gas mixtures containing ethylferrocene or TMAE vapors. The new technique could have many applications requiring robust and reliable large area detectors for UV visualization, as for example, in Cherenkov imaging devices.

  18. Corned Beef: an Enigmatic Irish Dish

    OpenAIRE

    Mac Con Iomaire, Máirtín; Gallagher, Pádraic Óg

    2011-01-01

    Corned beef and cabbage, which is consumed in America in large quantities each Saint Patrick’s Day (17th March), is considered by most Americans to be the ultimate Irish dish. However, corned beef and cabbage is seldom eaten in modern day Ireland. It is widely reported that Irish immigrants replaced their beloved bacon and cabbage with corned beef and cabbage when they arrived in America, drawing on the corned beef supplied by their neighbouring Jewish butchers, but not all commentators beli...

  19. Dynamic Underground Stripping Project

    International Nuclear Information System (INIS)

    Aines, R.; Newmark, R.; McConachie, W.; Udell, K.; Rice, D.; Ramirez, A.; Siegel, W.; Buettner, M.; Daily, W.; Krauter, P.; Folsom, E.; Boegel, A.J.; Bishop, D.; Udell, K.

    1992-01-01

    LLNL is collaborating with the UC Berkeley College of Engineering to develop and demonstrate a system of thermal remediation and underground imaging techniques for use in rapid cleanup of localized underground spills. Called ''Dynamic Stripping'' to reflect the rapid and controllable nature of the process, it will combine steam injection, direct electrical heating, and tomographic geophysical imaging in a cleanup of the LLNL gasoline spill. In the first 8 months of the project, a Clean Site engineering test was conducted to prove the field application of the techniques before moving the contaminated site in FY 92

  20. Strip casting apparatus and method

    Science.gov (United States)

    Williams, R.S.; Baker, D.F.

    1988-09-20

    Strip casting apparatus including a molten-metal-holding container and a nozzle to deposit molten metal onto a moving chill drum to directly cast continuous metallic strip. The nozzle body includes a slot bounded between a back and a front lip. The slot width exceeds about 20 times the gap distance between the nozzle and the chill drum surface. Preferably, the slot width exceeds 0.5 inch. This method of strip casting minimizes pressure drop, insuring better metal-to-chill-drum contact which promotes heat transfer and results in a better quality metallic strip. 6 figs.

  1. Effect of different temperature-time combinations on lipid and protein oxidation of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldan, Mar; Antequera, Teresa; Armenteros, Monica; Ruiz, Jorge

    2014-04-15

    Forty-five lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70 and 80 °C) and time (6, 12 and 24 h) to assess the effect on the oxidative stability of lipids and proteins. Heating induced both lipid and protein oxidation in lamb loins. Higher cooking temperature-time combinations increased conjugated dienes and decreased thiobarbituric reactive substances (TBARS) values and hexanal. Total protein carbonyls increased throughout time at all cooking temperatures considered, while α-aminoadipic (AAS) and γ-glutamic semialdehydes (GGS) increased when cooking at 60 °C but not at 80 °C. Links between the decrease in secondary compounds from lipid oxidation due to cooking at higher temperatures and for longer times with the increased levels of 3-methylbutanal and greater differences between total protein carbonyls and AAS plus GGS were hypothesised. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Sensory and consumer evaluation of pork loins from crossbreeds between Danish Landrace, Yorkshire, Duroc, Iberian and Mangalitza

    DEFF Research Database (Denmark)

    Straadt, Ida Krestine; Aaslyng, Margit Dall; Bertram, Hanne Christine S.

    2013-01-01

    Iberian (I) and Mangalitza (M) boars were crossed with Duroc (D) and Landrace/Yorkshire (LY) sows and compared with the traditional crossbreed DLY. The sensory attributes were analysed, and consumers evaluated the fried loins. Gas chromatography (GC) aroma analysis was performed on the fried meat......, and fatty acid composition was determined on the loin and the subcutaneous fat, respectively. No marked differences were found in odour, appearance or flavour/taste between the alternative crossbreeds and DLY; however, the alternative crossbreeds had improved textural properties. Consumer evaluation...... revealed that the alternative crossbreeds obtained positive associations compared with DLY, and MD was ranked best or second best by almost 60% of the consumers. No pronounced differences were found in the aroma compounds between the different crossbreeds. Correlations were found between the fatty acid...

  3. Updated estimates of HAL n and RN- effects on pork quality: fresh and processed loin and ham.

    Science.gov (United States)

    Cherel, P; Glénisson, J; Figwer, P; Pires, J; Damon, M; Franck, M; Le Roy, P

    2010-12-01

    A 1000-pig F2 intercross QTL detection experimental population was generated using two commercial sire lines. Independent carriers of HAL n and RN- mutations (10% and 14%, respectively) were included in this population as control genotypes. The effects of HAL n and RN- heterozygous genotypes on fresh and transformed loins and hams were estimated using a mixed model methodology. The results document the unfavorable effects of both mutations on meat quality. Smaller effects of HAL Nn genotype compared to HAL nn or RN-rn+ genotypes were estimated. Interestingly, effects of HAL Nn genotype on meat pH and loin color could be insignificant at 24-h postmortem, but translate into higher water losses on storage and cooking, and result in tougher cooked loin. Using the same methodology, significant effects of the PRKAG3 (RN) I199 allele on ultimate pH values but not on glycolytic potential were observed. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  4. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin

    Science.gov (United States)

    2016-01-01

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat. PMID:27857541

  5. Stability of lamb loin stored under refrigeration and packed in different modified atmosphere packaging systems.

    Science.gov (United States)

    Fernandes, Rafaella de Paula Paseto; Freire, Maria Teresa de Alvarenga; de Paula, Elisa Silva Maluf; Kanashiro, Ana Livea Sayuri; Catunda, Fernanda Antunes Pinto; Rosa, Alessandra Fernandes; Balieiro, Júlio Cesar de Carvalho; Trindade, Marco Antonio

    2014-01-01

    The aim of the present study was to evaluate the effect of different modified atmosphere packaging (MAP) systems (vacuum, 75% O2+25% CO2 and 100% CO2) on the stability of lamb loins stored at 1±1°C for 28 days. Microbiological (counts of aerobic and anaerobic psychrotrophic microorganisms, coliform at 45°C, coagulase-positive staphylococci and lactic acid bacteria and presence of Salmonella), physical and chemical (thiobarbituric acid reactive substances [TBARS], objective color, pH, water loss from cooking [WLC] and shear force), sensory (acceptance testing using a 9-point hedonic scale) and gas composition analyses were performed. Lamb meat remained stable with respect to the majority of the evaluated physical and chemical indexes and within the standards established by Brazilian legislation for pathogenic microorganisms throughout the storage period in all three packaging systems. However, with respect to psychrotrophic microorganisms, 100% CO2 packaging system provided increased stability despite presenting lower appearance preference. © 2013.

  6. Effects of Artificial Supercooling Followed by Slow Freezing on the Microstructure and Qualities of Pork Loin.

    Science.gov (United States)

    Kim, Yiseul; Hong, Geun-Pyo

    2016-10-31

    This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

  7. Environmental impacts of beef production

    NARCIS (Netherlands)

    Gerber, P.J.; Mottet, Anne; Opio, C.I.; Falcucci, Alessandra; Teillard, Félix

    2015-01-01

    Beef makes a substantial contribution to food security, providing protein, energy and also essential micro-nutrients to human populations. Rumination allows cattle - and other ruminant species - to digest fibrous feeds that cannot be directly consumed by humans and thus to make a net positive

  8. Characterization of galvannealed strip

    International Nuclear Information System (INIS)

    Moreas, G.; Hardy, Y.

    1999-01-01

    With the aim of enhancing coating quality control during galvannealing process, an online microscopic image acquisition sensor has been developed at CRM. In galvannealing process, the ζ phase surface density is a coating quality characteristic, and the on-line microscope, equipped with optics placed at 20 mm from the surface, grabs 250 μm x 190 μm images on which ζ crystals (approximate dimensions: 1 μm x 10 μm) can be clearly identified. On-line, the sensor is mounted in front of a roll where the strip has a stable position. The coating surface to sensor optics distance is continuously measured by an accurate triangulation sensor (1 μm repeatability) and is adjusted in such a way that, due to roll eccentricity, the image is focused at least twice per revolution. When focused, image of moving product is frozen by a short (10 ns) laser light pulse and is grabbed. The obtained image is then processed to extract ζ phase percentage and allows adjustment of process parameters to reach the desired coating characteristics. (author)

  9. Non-destructive analysis of sensory traits of dry-cured loins by MRI-computer vision techniques and data mining.

    Science.gov (United States)

    Caballero, Daniel; Antequera, Teresa; Caro, Andrés; Ávila, María Del Mar; G Rodríguez, Pablo; Perez-Palacios, Trinidad

    2017-07-01

    Magnetic resonance imaging (MRI) combined with computer vision techniques have been proposed as an alternative or complementary technique to determine the quality parameters of food in a non-destructive way. The aim of this work was to analyze the sensory attributes of dry-cured loins using this technique. For that, different MRI acquisition sequences (spin echo, gradient echo and turbo 3D), algorithms for MRI analysis (GLCM, NGLDM, GLRLM and GLCM-NGLDM-GLRLM) and predictive data mining techniques (multiple linear regression and isotonic regression) were tested. The correlation coefficient (R) and mean absolute error (MAE) were used to validate the prediction results. The combination of spin echo, GLCM and isotonic regression produced the most accurate results. In addition, the MRI data from dry-cured loins seems to be more suitable than the data from fresh loins. The application of predictive data mining techniques on computational texture features from the MRI data of loins enables the determination of the sensory traits of dry-cured loins in a non-destructive way. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  10. Consumer perception of Brazilian traced beef

    Directory of Open Access Journals (Sweden)

    Júlio Otávio Jardim Barcellos

    2012-03-01

    Full Text Available The objective of this study was to determine consumers understanding of beef traceability, identifying how consumers value this meat and traceability elements to be presented on retail shelves. The method used in this study was a survey through the internet applying the Sphinx software. The sample consisted of 417 consumers, mostly living in Porto Alegre, Brazil. Consumers are aware of certified beef, consider it important, but this is not a demand. As to traced beef, most consumers (62.4% are in favor of mandatory traceability of beef cattle in Brazil, but 86.6% disagree with the destination of traced beef only to the foreign market. The majority of people are willing to pay more for traced beef and consider traceability a market opportunity, used as a differentiating tool.

  11. Buffers and vegetative filter strips

    Science.gov (United States)

    Matthew J. Helmers; Thomas M. Isenhart; Michael G. Dosskey; Seth M. Dabney

    2008-01-01

    This chapter describes the use of buffers and vegetative filter strips relative to water quality. In particular, we primarily discuss the herbaceous components of the following NRCS Conservation Practice Standards.

  12. Magnetic stripping studies for SPL

    CERN Document Server

    Posocco, P; CERN. Geneva. BE Department

    2010-01-01

    Magnetic stripping of H- can seriously enhance the beam losses along the SPL machine. These losses depend on the beam energy, on the beam transverse distribution and on the intensity of the magnetic field. For radioprotection issues the losses must be limited to 1 W/m. In this paper we will concentrate on the stripping phenomena inside the quadrupole magnets with the aim of defining the quadrupole range for the design phase of SPL.

  13. La subjugation des femmes musulmanes et la sororité dans Loin de Médine par Assia Djebar

    Directory of Open Access Journals (Sweden)

    Rachel van Deventer

    2010-05-01

    Full Text Available Cet article porte sur les premières femmes musulmanes telles qu’elles sont représentées dans l’oeuvre d’Assia Djebar, Loin de Médine, récit situé au tout début de l’histoire de l’Islam. A travers les parcours narratifs de plusieurs femmes marquantes de l’histoire de l’Islam, l’auteur identifie la sororité comme arme unique contre toute oppression. Une lecture critique invite non seulement les lectrices mais aussi les lecteurs contemporains à examiner le statut actuel des femmes musulmanes.

  14. Comparison of different image analysis algorithms on MRI to predict physico-chemical and sensory attributes of loin

    DEFF Research Database (Denmark)

    Caballero, Daniel; Caro, Andrés; Dahl, Anders Bjorholm

    2018-01-01

    -chemical and sensory analysis. CFA reached low relationship for the quality parameters of loins, the remaining algorithms achieved correlation coefficients higher than 0.5 noting OPFTA that reached the highest correlation coefficients in all cases except for the L* coordinate color that GLCM obtained the highest...... correlation coefficient. These high correlation coefficients confirm the new algorithm as an alternative to the other computer vision approaches in order to compute the physico chemical and sensory parameters of meat products in a non-destructive and efficient way....

  15. High Sierra Beef Progress Update

    OpenAIRE

    Ingram, Roger

    2004-01-01

    Research similar efforts in other regions Research was completed on similar efforts in other regions. There are over 300 grass-fed beef marketing operations across the United States. Here in California, there are approximately 10. Most are selling approximately 50-60 head per year. This appears to be a marketing limit for those who produce, process, market and distribute on their own. Additional labor and space requirements for marketing, storage for dry-aging, and distribution appea...

  16. Genetic variation of loin and ham quality in Finnish Landrace and Large White pigs

    Directory of Open Access Journals (Sweden)

    M-L. SEVÓN-AIMONEN

    2008-12-01

    Full Text Available Selection potential for meat quality of economically important loin (longissimus and ham muscles (adductor, semimembranosus, biceps femoris has been assessed. Ultimate pH (pHu, meat colour (lightness, redness and yellowness, drip loss and two visually scored colour traits were recorded from 483 Finnish Landrace and 494 Finnish Large White station test pigs in a half-sib design. A univariate restricted maximum likelihood procedure was used to estimate variance components. The statistical model contained age at beginning of test, sex and time lapse from slaughter to dissection as fixed effects and slaughter batch, common environment of littermates and additive genetic effect of the animal as random effects. The average pHu values in adductor and semispinalis were between 5.6 and 6.1. The pHu were on average 5.4 and 5.5 in longissimus and semimembranosus respectively, with the latter two being lower than optimum values of 5.6 to 5.9. Lightness for semimembranosus turned to be clearly lighter (62 than for other muscles. Lightness for longissimus (56 was slightly lighter than optimum (from 48 to 54. The heritability varied from zero to 0.45 for pHu, from 0.02 to 0.34 for lightness, from 0.17 to 0.56 for redness, from zero to 0.28 for yellowness and from 0.05 to 0.16 for drip loss. Heritability for redness values was considerably higher than heritability for other meat quality traits. The heritability of quality traits spoke for possibilities for genetic improvement of meat quality. Genetic correlations between quality traits (pHu and lightness and average daily gain varied strongly among breeds and muscles. Genetic correlations between meat-% and pHu were in most cases high and unfavourable (rg from –0.36 to –0.68 except in longissimus, where it was 0.11. Genetic correlations between meat-% and lightness were unfavourable in Finnish Large White (from 0.47 to 0.92 but in Finnish Landrace estimates varied among muscles (from –0.40 to 0.47. Due to

  17. The effect of a high monounsaturated fat diet on body weight, back fat and loin muscle growth in high and medium-lean pig genotypes

    Energy Technology Data Exchange (ETDEWEB)

    Mas, G.; Soler, J.; Llavall, M.; Tibau, J.; Roca, R.; Coll, D.; Fabrega, E.

    2012-11-01

    The objective of this study was to evaluate whether the use of a diet rich in oleic acid could have an effect on daily weight gain, backfat and loin muscle (Longissimus thoracis) depth. One hundred and ninety-two barrows and gilts, from two genotypes were fed a grain and soy diet (CONTROL with 28% C18:1) or a similar diet enriched with oleic acid (HO with 43% C18:1, Greedy-Grass OLIVA). The pigs were housed in 16 pens in groups of 12 according to their sex, diet and genotype. From 75 days of age every three weeks, the pigs were weighed and the backfat and loin muscle depth were ultrasonically recorded (PIGLOG). The inclusion of the dietary fat had no significant effect on the growth variables nor on the backfat and loin muscle depth measurements taken. However, the barrows resulted in higher live weight and backfat compared to the gilts at the end of the trial. Conversely, the gilts showed higher loin depth. Moreover, York-sired pigs were heavier than Pietrain-sired pigs during the whole trial and showed higher backfat at the last two measurements. Pietrain-sired pigs had higher loin muscle depth at the last measurements. The results of the present study suggest that the addition of a dietary fat into diets aiming at modifying the meat fatty acid profile has no detrimental effects on performance variables, or on backfat and loin muscle growth and thus, no negative economic impact for producers. (Author) 37 refs.

  18. Variables affecting the propensity to buy branded beef among groups of Australian beef buyers.

    Science.gov (United States)

    Morales, L Emilio; Griffith, Garry; Wright, Victor; Fleming, Euan; Umberger, Wendy; Hoang, Nam

    2013-06-01

    Australian beef consumers have different preferences given their characteristics and the effect on expected quality of cues related to health, production process and eating experience. Beef brands using Meat Standards Australia (MSA) grades can help to signal quality and reduce consumers' uncertainty when shopping. The objective of this study is to identify the characteristics of beef buyers and their perceptions about product attributes that affect the propensity to buy branded beef. Binary logistic models were applied identifying differences between all respondents and the potential target market, including buyers in medium to high income segments, and between buyers in the target market who would buy branded beef for taste and health reasons. Variables increasing the propensity to buy branded beef include previous experience, appreciation for branded cuts and concern about quality more than size. Finally, variations in preferences for marbling and cut were found between buyers who would buy branded beef for taste and health reasons. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. 9 CFR 319.81 - Roast beef parboiled and steam roasted.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Roast beef parboiled and steam roasted... beef parboiled and steam roasted. “Roast Beef Parboiled and Steam Roasted” shall be prepared so that... “Roast Beef Parboiled and Steam Roasted.” When beef cheek meat, beef head meat, or beef heart meat is...

  20. Estimation of Sensory Pork Loin Tenderness Using Warner-Bratzler Shear Force and Texture Profile Analysis Measurements.

    Science.gov (United States)

    Choe, Jee-Hwan; Choi, Mi-Hee; Rhee, Min-Suk; Kim, Byoung-Chul

    2016-07-01

    This study investigated the degree to which instrumental measurements explain the variation in pork loin tenderness as assessed by the sensory evaluation of trained panelists. Warner-Bratzler shear force (WBS) had a significant relationship with the sensory tenderness variables, such as softness, initial tenderness, chewiness, and rate of breakdown. In a regression analysis, WBS could account variations in these sensory variables, though only to a limited proportion of variation. On the other hand, three parameters from texture profile analysis (TPA)-hardness, gumminess, and chewiness-were significantly correlated with all sensory evaluation variables. In particular, from the result of stepwise regression analysis, TPA hardness alone explained over 15% of variation in all sensory evaluation variables, with the exception of perceptible residue. Based on these results, TPA analysis was found to be better than WBS measurement, with the TPA parameter hardness likely to prove particularly useful, in terms of predicting pork loin tenderness as rated by trained panelists. However, sensory evaluation should be conducted to investigate practical pork tenderness perceived by consumer, because both instrumental measurements could explain only a small portion (less than 20%) of the variability in sensory evaluation.

  1. Antimicrobial resistance issues in beef production

    Science.gov (United States)

    Antimicrobial resistance threats to human health as identified have been recognized as a critical global public health concern. Linkage of some threats to beef production is discussed. The relevance to beef production of recent government actions will be examined. Prominent antimicrobial resistance ...

  2. People on the Farm: Raising Beef Cattle.

    Science.gov (United States)

    Crain, Robert L.

    This booklet provides information on raising beef cattle through profiles of two families, the Ritschards of Colorado and the Schuttes of Missouri. Through descriptions of daily life for these families, the booklet discusses the way of life on modern beef cattle farms and the problems and decisions faced by farmers. The booklet explains how…

  3. Polymorphisms in the GHRL gene and their associations with traits of economic interest in beef cattle.

    Science.gov (United States)

    Braz, C U; Camargo, G M F; Cardoso, D F; Gil, F M M; Fonseca, P D S; Cyrillo, J N S G; Mercadante, M E Z; Oliveira, H N; Tonhati, H

    2015-12-28

    The hormone ghrelin is produced in the stomach wall, has an orexigenic function, stimulates growth hormone secretion, and affects the energy balance of the animal. Therefore, the ghrelin gene (GHRL) is considered to be a good candidate marker for the identification of traits of great economic importance in cattle, such as those associated with feed intake, growth, and carcass quality. The use of molecular genetic markers associated with such traits permits the earlier and more accurate identification of superior animals, thus reducing the interval between generations, and increasing the genetic gain. Six SNPs were found in the GHRL gene, located in intron 3, intron 4, and exon 5. The positions of the SNPs on the gene and the substitutions were: g.2184A>G, g.2347T>C, g.4469T>C, g.4548A>G, g.4663T>C, and g.4729T>C (GenBank accession No. JX565585). After analysis of linkage disequilibrium, association tests were performed between four SNPs with the traits year weight for males, yearling weight for females, dry matter intake, loin eye area, and rump fat thickness (P ≤ 0.05). Therefore, GHRL is an important candidate gene that may be used to identify genetic variations that influence traits of economic importance in beef cattle.

  4. European consumers' acceptance of beef processing technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    2010-01-01

    The use of new technologies in beef production chains may affect consumers' opinion of meat products. A qualitative study was performed to investigate consumers' acceptance of seven beef processing technologies: marinating by injection aiming for increased 1) healthiness; 2) safety; and 3) eating...... adults (19-60 years old) participated in eight focus groups in Spain, France, Germany and the UK. Results suggested a relationship between acceptance of new beef products, technology familiarity and perceived risks related to its application. Excessive manipulation and fear of moving away from 'natural......' beef were considered negative outcomes of technological innovations. Beef processing technologies were predominantly perceived as valuable options for convenience shoppers and less demanding consumers. Overall, respondents supported the development of 'non-invasive' technologies that were able...

  5. The beef market in the European Union

    DEFF Research Database (Denmark)

    Nielsen, Niels Asger

    small with the largest slaughtering company slaughtering only 3% of the total. 9. Relations between industry (slaughterhouses) and farmers tend to be much looser in the beef market than it is in other agricultural markets, eg the milk market. Cattle markets are still quite important although the share......'s share of total meat consumption 3. As a consequence of the consumers' demand for convenient shopping, butcher's share of total beef sales is rapidly decreasing in Europe. 4. Changes in meat consumption have traditionally been explained by relative price and per capita income, but these economic demand...... analyses can explain a rapidly decreasing share of the variation in beef consumption. 5. Studies show that beef consumption tends to increase with age; the heavy users are found among middle-aged men. Beef consumption also increases with income and social class. 6. The most important user-oriented quality...

  6. QUALITY MANAGEMENT IN ECOLOGICAL BEEF PRODUCTION

    Directory of Open Access Journals (Sweden)

    Cornelia Petroman

    2012-09-01

    Full Text Available Producing high quality beef asks for the implementation of a performing management of raising cattle ecologically. The main ways of improving beef quality management have a technical nature: sustaina ble grazing management to conserve floral diversity and to obtain ecological beef and rational distribution of the cattle over the grassland to facilitate vegetation recovery and to avoid the setting of invasive species. Implementing a sustainable manageme nt of the resources in the neighborhood of animal farms has beneficial effects on beef quality, brings good economic income through the practice of best beef quality management, protects the environment long - term, and reduces infrastructure expenses thus a voiding the risks of meat contamination.

  7. MOET Utility in Beef Production Strategies

    Directory of Open Access Journals (Sweden)

    Marcel Theodor Paraschivescu

    2012-10-01

    Full Text Available The paper presents the reason of beef production for human food security and the necessity of special dairy and beefbreeds in order to balance the milk and the meat production in cattle farming. That is a difficult target for manycountries since they don’t dispose of large natural pastures to extensively feed the beef cattle herds. At the same timemany European countries breed only dual purpose cattle breeds. So the idea of intensive farming with beef breeds orcrosses is developed. To speed up this kind of programs Open MOET (Multiple Ovulation Embryo Transfer Farmtechnology is proposed and it is completed with the needed facilities for production and preservation of embryos.Concerning the MOET Farm which confers directly pure bred beef calves, emphases is put on veterinary quarantineand heifer receptors conditioning. Concerning embryo conservation the direct transfer (DT technique isrecommended. Modalities of integrating dairy farms and beef cattle farms are finally discussed as recommendedstrategy for Romanian Agriculture.

  8. Beef traders' and consumers' perceptions on the development of a ...

    African Journals Online (AJOL)

    Beef traders' and consumers' perceptions on the development of a natural pasture-fed beef (NPB) brand by smallholder cattle producers were investigated. In total, 18 meat traders (five abattoirs and 13 beef retailers) and 155 beef consumers were interviewed using structured questionnaires. All meat traders had the ...

  9. The North Dakota Beef Industry Survey: Implications for Extension

    Science.gov (United States)

    Dahlen, Carl R.; Hadrich, Joleen C.; Lardy, Gregory P.

    2014-01-01

    A portion of the North Dakota Beef Industry Survey was developed to determine how educational programs can evolve to meet future needs of North Dakota beef producers. Of the 2,500 surveys mailed out to beef producers, 527 responses were completed and returned. Results highlight the level of education of North Dakota beef producers, anticipated use…

  10. 9 CFR 319.15 - Miscellaneous beef products.

    Science.gov (United States)

    2010-01-01

    ..., the amount of such cheek meat shall be limited to 25 percent; and if in excess of natural proportions..., binders, or extenders. Beef cheek meat (trimmed beef cheeks) may be used in the preparation of hamburger... levels of up to 65 ppm may be used as a binder. Beef cheek meat (trimmed beef cheeks) may be used in the...

  11. Magnetic ring for stripping enhancement

    International Nuclear Information System (INIS)

    Selph, F.

    1992-10-01

    A ring designed to recycle ions through a stripping medium offers the possibility for increasing output of the desired charge state by up to 4x. This could be a very important component of a Radioactive Nuclear Beam Facility. In order for such a ring to work effectively it must satisfy certain design conditions. These include achromaticity at the stripper, a dispersed region for an extraction magnet, and a number of first and higher order optics constraints which are necessary to insure that the beam emittance is not degraded unduly by the ring. An example is given of a candidate design of a stripping ring

  12. Does this case hold the answer to one of the worse types of pain in medicine--that of loin pain haematuria syndrome (LPHS).

    Science.gov (United States)

    Russell, Alan; Chatterjee, Suman; Seed, Michael

    2015-04-26

    A patient with loin pain haematuria syndrome suffering chronic throbbing pulsing pain overlaid with prolonged periods of incapacitating colic and overnight vomiting was presented 10 months following diagnosis. Ultrasound was normal. No renal or ureteral stones, or filling defects were seen on CT. At cytoscopy, bladder and urethra were normal, and bloody urine effluxed from the left ureteric orifice. The ureters were normal at diagnosis, and developed new abutting non-penetrating calcifications by 8 months. Pain episodes of complete incapacitating intensity of 2-4 h duration were reduced to 10 min with 5 mg crushed tadalafil administered at onset. If tadalafil was delayed to after onset, the original course of agony resulted. Daily tadalafil reduced loin pain intensity, but not the exacerbations. Tadalafil efficacy may indicate that the pain exacerbations are due to spasm of ureter smooth muscle. 5 mg tadalafil taken at onset alleviated severe loin pain exacerbations in this case of loin pain haematuria syndrome. 2015 BMJ Publishing Group Ltd.

  13. Beef healthiness and nutritional enhancement in beef as perceived by European consumers

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; van Wezemael, Lynn

    Introduction: A trend towards a higher awareness of health with respect to food intake has been noticed during the last years. This makes the concept of health in relation to beef production and consumption a highly relevant research topic. Objective: To investigate beef healthiness and nutritional...... discussions were based on a common topic guide, translated into each language. The guide consisted of several sections, including one designed to elicit information on their opinions about beef healthiness and nutritional enhancement of beef. Results: Consumers associated health with wellbeing, an absence...... of disease and a good quality of life. Healthy beef was associated with a certain bias towards a "romantic view", a concept of the traditional encompassing grass-fed beef, raised outdoors with natural food. A healthy cut of meat was expected to be natural and without additives and hormones that could affect...

  14. A model for 'sustainable' US beef production.

    Science.gov (United States)

    Eshel, Gidon; Shepon, Alon; Shaket, Taga; Cotler, Brett D; Gilutz, Stav; Giddings, Daniel; Raymo, Maureen E; Milo, Ron

    2018-01-01

    Food production dominates land, water and fertilizer use and is a greenhouse gas source. In the United States, beef production is the main agricultural resource user overall, as well as per kcal or g of protein. Here, we offer a possible, non-unique, definition of 'sustainable' beef as that subsisting exclusively on grass and by-products, and quantify its expected US production as a function of pastureland use. Assuming today's pastureland characteristics, all of the pastureland that US beef currently use can sustainably deliver ≈45% of current production. Rewilding this pastureland's less productive half (≈135 million ha) can still deliver ≈43% of current beef production. In all considered scenarios, the ≈32 million ha of high-quality cropland that beef currently use are reallocated for plant-based food production. These plant items deliver 2- to 20-fold more calories and protein than the replaced beef and increase the delivery of protective nutrients, but deliver no B 12 . Increased deployment of rapid rotational grazing or grassland multi-purposing may increase beef production capacity.

  15. Lipid profile of commercial beef cuts from grazing, suckling calves

    Directory of Open Access Journals (Sweden)

    Vargas, Karin

    2009-12-01

    Full Text Available The objective of the present research was to determine the contents of fat, cholesterol and fatty acids of eight beef cuts from unsupplemented, suckling, 7-8 month old male and female calves reared on permanent pastures in the VIIth Region of Chile by small cattle producers. A total of 54 animals with a mean carcass weight of 150 ± 22 kg were slaughtered in a commercial abattoir on three different dates during the month of March, 2008. Five samples of each of eight cuts were collected at random as they exited the abattoir, cooled and packed following industry practices. Beef cuts were selected based on an earlier, unreplicated analysis of 21 common cuts, to represent a wide range of cuts currently available to consumers. Large and significant differences were observed in fat content with a mean of 2.12%, ranging between 4.23% for sirloin strip and 0.68% for butcher’s roast. The cholesterol content did not differ between cuts (mean 44.7 mg/100 mg meat and was unrelated to fat percentage. A stringent discriminant analysis of the fatty acid profiles detected highly significant differences between cuts and correctly classified 37 of the 40 samples. The n6:n3 ratio did not differ between cuts and ranged between 1.9 for sirloin strip and 2.6 for rib roast and silverside’s end. Significant differences between cuts were detected for most fatty acids, and for the atherogenicity index. Nevertheless, the latter only varied between 0.60 and 1.07 for topside and sirloin strip respectively. The results are compared with literature values. Notwithstanding differences between cuts, all beef samples were lean and had lipid profiles compatible with human health as part of a balanced diet.El objetivo del trabajo fue determinar el contenido de grasa, colesterol y perfil de ácidos grasos de ocho cortes provenientes de terneros lactantes, de 7-8 meses de edad y engordados en prados permanentes de la VII Region de Chile, por productores pequeños. Se

  16. Beef, Real Food for Real People: An Industrial Analysis of the Beef Industry

    Science.gov (United States)

    1992-04-01

    poultry . In 1989 Amrericans spent an average of $3.89 per person per week on beef products. Consumer bought $21 billion in beef products in 1989; they...or decreases in price. If the price of beef gets to high, consumers will switch their purchase to another red meat, poultry or seafood. TECHNOLOGY...The beginning of organized labor in meatpacking occurred with the -- •formation of the Amalgamated Meat Cutters and Butcher Workman of North America

  17. Using Comic Strips in Language Classes

    Science.gov (United States)

    Csabay, Noémi

    2006-01-01

    The author believes that using comic strips in language-learning classes has three main benefits. First, comic strips motivate younger learners. Second, they provide a context and logically connected sentences to help language learning. Third, their visual information is helpful for comprehension. The author argues that comic strips can be used in…

  18. Sustainability of US Organic Beef and Dairy Production Systems: Soil, Plant and Cattle Interactions

    Directory of Open Access Journals (Sweden)

    Kathy J. Soder

    2013-07-01

    Full Text Available In 2010, the National Organic Program implemented a rule for the US stating that pasture must be a significant source of feed in organic ruminant systems. This article will focus on how the pasture rule has impacted the management, economics and nutritional value of products derived from organic ruminant systems and the interactions of grazing cattle with pasture forages and soils. The use of synthetic fertilizers is prohibited in organic systems; therefore, producers must rely on animal manures, compost and cover crops to increase and maintain soil nitrogen content. Rotational and strip grazing are two of the most common grazing management practices utilized in grazing ruminant production systems; however, these practices are not exclusive to organic livestock producers. For dairy cattle, grazing reduces foot and leg problems common in confinement systems, but lowers milk production and exposes cows to parasites that can be difficult to treat without pharmaceuticals. Organic beef cattle may still be finished in feedlots for no more than 120 days in the US, but without growth hormones and antibiotics, gains may be reduced and illnesses increased. Grazing reduces the use of environmentally and economically costly concentrate feeds and recycles nutrients back to the soil efficiently, but lowers the rate of beef liveweight gain. Increased use of pasture can be economically, environmentally and socially sustainable if forage use efficiency is high and US consumers continue to pay a premium for organic beef and dairy products.

  19. European beef consumers' interest in a beef eating-quality guarantee

    DEFF Research Database (Denmark)

    Verbeke, Wim; Van Wezemael, Lyn; de Barcellos, Marcia Dutra

    2010-01-01

    and Germany to assess their opinions about beef muscle profiling and their interest in a beef eating-quality guarantee. Findings indicate that both concepts are well accepted by European beef consumers, although not unconditional. Besides acknowledging the opportunity to purchase beef with guaranteed...... tenderness, consumers express some reserve related to the possible upgrading of lower value cuts, too much standardisation, and the fact that tenderness is to some extent subjective. They further require the system to be simple, sufficiently documented and independent-party controlled. The insights obtained...

  20. Development of a Rapid Immunodiagnostic Test for Pork Components in Raw Beef and Chicken Meats: a Preliminary Study

    Directory of Open Access Journals (Sweden)

    S. N. Depamede

    2011-08-01

    Full Text Available A rapid immunodiagnostic test that provides visual evidence of the presence of pork components in raw beef and chicken meats was developed. Colloidal gold was prepared and conjugated with anti-Swine IgG polyclonal antibody. Immunochromatographic test strips were produced, and then were used to test laboratory adulterated raw meat samples. The samples consisted adulteration meat, immunodiagnostic, pork, rapid test of pork-in-beef, or pork-in-chicken at 1/0; 1/100; 1/1,000; 1/5,000; 1/10,000 (w/w adulteration levels that were extracted in phosphate-buffered saline. Raw beef and chicken meats without pork were included as controls. Analysis was completed in 10 min. Detection limit was 1/5,000 (w/w, although 1/10,000 was also observed. This immunodiagnostic tests can be conveniently applied to detect low levels of pork components in raw beef and chicken meat products. For the commercial purposes, further studies need to be carried out.

  1. ROMANIAN BEEF AND VEAL MEAT MARKET ANALYSIS

    Directory of Open Access Journals (Sweden)

    ilvius T. STANCIU

    2014-06-01

    Full Text Available Current nutritional trends, oriented towards a healthy nutrition, lead to the re-evaluation of the share held by beef in the diet of the population. The demand for beef and veal at European and global market level can represent a significant opportunity to increase domestic producers’ business. Though cattle breeding is a traditional activity for the indigenous population from rural areas, livestock for slaughter have decreased steadily in the last years, thus the domestic market being dependent on imports. Romanian natural potential allows the achievement of sufficient production to meet domestic and export demand for beef, which brings high income for producers. The article proposes a review of the domestic production of beef and veal, their consumption and the origin of products on the domestic market in the European and international context.

  2. Method of stripping solid particles

    International Nuclear Information System (INIS)

    1980-01-01

    A method of stripping loaded solid particles is specified in which uniform batches of the loaded particles are passed successively upwardly through an elution column in the form of discrete plugs, the particles of which do not intermingle substantially with the particles of the vertically adjacent plug(s), and are contacted therein with eluant liquid flowed downwardly, strong eluate being withdrawn from the lower region of the column, the loaded particles being supplied as a slurry in a carrier liquid, and successive batches of loaded particles being isolated as measured batches and being separated from their carrier liquid before being contacted with strong eluate and slurried with the strong eluate into the lower region of the column. An example describes the stripping of ion exchange resin particles loaded with complex uranium ions. (author)

  3. Antioxidative activity of carnosine in gamma irradiated ground beef and beef patties

    International Nuclear Information System (INIS)

    Badr, H.M.

    2005-01-01

    The activity of carnosine as a natural antioxidant in gamma irradiated ground beef and beef patties was studied. Samples of ground beef, in absence and presence of 0.5% or 1.0% carnosine, as well as raw and cooked beef patties prepared with 1.5% salt (NaCl), in absence and presence of 0.5% or 1.0% carnosine, were gamma irradiated at doses of 2 and 4 KGy. Then, the extent of oxidation in irradiated and non-irradiated samples of ground beef and raw beef patties was determined during refrigerated (4± 1 degree C) and frozen (-18 degree C) storage, while was determined for cooked beef patties during refrigerated storage only. Moreover, the determination of metmyoglobin (MetMb) accumulation and sensory evaluation for the visual colour were carried out for samples of ground beef and raw patties. The results indicated that salt or salt and cooking can accelerate the oxidative processes and significantly increased the peroxide value (PV) and thiobarbituric acid reactive substances (TBARS) in the prepared non-irradiated samples. However, salt slowed down the accumulation of MetMb in raw patties. Irradiation treatments and storage in absence of carnosine significantly increased with higher rates the PV and TBARS in salted or salted and cooked beef samples. Moreover, irradiation and storage significantly increased the formation of MetMb in ground beef and raw patties in absence of carnosine. Addition of carnosine significantly reduced the oxidative processes and MetMb formation (proportionally to the used concentration) in samples post irradiation and during storage. Furthermore, carnosine exerted significant efficacy in maintaining an acceptable visual red colour post irradiation and during storage of ground beef and raw patties. These results demonstrate that carnosine can be successfully used as a natural antioxidant to increase the oxidative stability in gamma irradiated raw and cooked meat products

  4. Antimicrobial usage and resistance in beef production

    OpenAIRE

    Cameron, Andrew; McAllister, Tim A.

    2016-01-01

    Antimicrobials are critical to contemporary high-intensity beef production. Many different antimicrobials are approved for beef cattle, and are used judiciously for animal welfare, and controversially, to promote growth and feed efficiency. Antimicrobial administration provides a powerful selective pressure that acts on the microbial community, selecting for resistance gene determinants and antimicrobial-resistant bacteria resident in the bovine flora. The bovine microbiota includes many harm...

  5. Hedonic Retail Beef and Pork Product Prices

    OpenAIRE

    Parcell, Joseph L.; Schroeder, Ted C.

    2007-01-01

    Consumer-level hedonic models are estimated to determine factors affecting retail pork and beef meat cuts. Results indicate that brand premium and discount varies across private, national, and store brands and that brand premium varies across meat cuts carrying the same brand name. Product size discounts are linear for beef and nonlinear for pork, meat items on sale are significantly discounted to non-sale items, specialty stores typically will not garner higher prices than supermarket/grocer...

  6. Salmonella in beef and produce from honduras.

    Science.gov (United States)

    Maradiaga, Martha; Miller, Mark F; Thompson, Leslie; Pond, Ansen; Gragg, Sara E; Echeverry, Alejandro; Garcia, Lyda G; Loneragan, Guy H; Brashears, Mindy M

    2015-03-01

    Salmonella continues to cause a considerable number of foodborne illnesses worldwide. The sources of outbreaks include contaminated meat and produce. The purpose of this study was to establish an initial investigation of the burden of Salmonella in produce and beef from Honduras by sampling retail markets and abattoirs. Retail produce samples (cantaloupes, cilantro, cucumbers, leafy greens, peppers, and tomatoes; n = 573) were purchased in three major cities of Honduras, and retail whole-muscle beef (n = 555) samples were also purchased in four major cities. Additionally, both hide and beef carcass (n = 141) samples were collected from two Honduran abattoirs. Whole-muscle beef samples were obtained using a sponge hydrated with buffered peptone water, and 10 ml of the buffered peptone water rinsate of each produce sample was collected with a dry sponge and placed in a bag to be transported back to the United States. Salmonella was detected using a commercially available, closeplatform PCR system, and positive samples were subjected to culture on selective media to obtain isolates. Overall, the prevalence of Salmonella-positive samples, based on PCR detection in Honduras (n = 555) retail beef was 10.1% (95% confidence interval = 7.8, 12.9), whereas 7.8% (n = 141) of beef carcass and hides samples were positive in both beef plants. The overall Salmonella prevalence for all produce samples (n = 573) collected was 2.1% (95% confidence interval = 1.2, 3.6). The most common serotypes identified in Honduras were Salmonella Typhimurium followed by Derby. These results provide an indication of Salmonella contamination of beef and produce in Honduras. Developing a Salmonella baseline for Latin America through an initial investigation like the one presented here contributes to a broader global understanding of the potential exposure through food, thus providing insight into the needs for control strategies.

  7. Vitamin D-biofortified beef

    DEFF Research Database (Denmark)

    Duffy, Sarah K.; O'Doherty, John V.; Rajauria, Gaurav

    2018-01-01

    This study investigates dietary fortification of heifer feeds with cholecalciferol and ergocalciferol sources and effects on beef total vitamin D activity, vitamer, respective 25-hydroxymetabolite contents, and meat quality. Thirty heifers were allocated to one of three dietary treatments [(1......) basal diet + 4000 IU of vitamin D3 (Vit D3); (2) basal diet + 4000 IU of vitamin D2 (Vit D2); and (3) basal diet + 4000 IU of vitamin D2-enriched mushrooms (Mushroom D2)] for a 30 day pre-slaughter period. Supplementation of heifer diets with Vit D3 yielded higher (p ...) total vitamin D activity (by 38–56%; p vitamin D source, carcass characteristics, sensory and meat quality parameter were unaffected (p > 0.05) by the dietary...

  8. Creep feeding nursing beef calves.

    Science.gov (United States)

    Lardy, Gregory P; Maddock, Travis D

    2007-03-01

    Creep feeding can be used to increase calf weaning weights. However, the gain efficiency of free-choice, energy-based creep feeds is relatively poor. Generally, limit-feeding, high-protein creep feeds are more efficient, and gains may be similar to those produced by creep feeds offered free choice. Creep feeding can increase total organic matter intake and improve the overall energy status of the animal. Creep-fed calves tend to acclimate to the feedlot more smoothly than unsupplemented calves. Furthermore, provision of a high-starch creep feed may have a positive influence on subsequent carcass quality traits. Creep feeding can be applied to numerous environmental situations to maximize calf performance; however, beef cattle producers should consider their individual situations carefully before making the decision to creep feed.

  9. Effect of packaging type during postmortem aging and degree of doneness on pork chop sensory traits of loins selected to vary in color and marbling.

    Science.gov (United States)

    Klehm, B J; King, D A; Dilger, A C; Shackelford, S D; Boler, D D

    2018-05-04

    The objective was to determine the interactions between packaging type and degree of doneness on sensory traits of pork loins classified based on the newly proposed USDA quality grades. A total of 144 loins were selected from 2 groups of pigs (lean growth or meat quality production focus) to represent as much variation in visual color and marbling as possible. Selection was achieved with a VQG grading camera. The ventral surface of the loins was evaluated for loin quality traits at 1 d postmortem. At 2 d postmortem loins were sliced into 28-mm-thick chops. Chop within each loin was randomly assigned to either individual vacuum packages or to individual Styrofoam trays and overwrapped in polyvinyl chloride (PVC) oxygen permeable film. Overwrapped PVC packages were then placed in bulk packages and flushed with a gas mixture that contained approximately 0.4% carbon monoxide, 30% carbon dioxide, and 80% nitrogen. Vacuum-packaged chops were aged until 14 d postmortem. Chops packaged in PVC overwrap were aged until 9 d postmortem in the bulk packages, then placed on simulated retail display until 14 d postmortem. Chops from each packaging type were cooked to an internal temperature of either 63 °C or 71 °C for the evaluation of slice shear force (SSF) or for evaluation of tenderness, juiciness, and flavor by a trained panel. Data were analyzed as split-split plot design with production focus of the pigs, proposed USDA quality grade, packaging type, and degree of doneness as fixed effects. While there were main effect differences between production focuses, there were no interactions with production focus. There were also no 3-way (P ≥ 0.19) interactions and only one 2-way interaction among quality grade, packaging type, or degree of doneness. There were no differences in sensory tenderness (P = 0.30), juiciness (P = 0.49), flavor (P = 0.89), SSF (P = 0.13), or cook loss (P = 0.06) among USDA quality grades. There were no differences in sensory tenderness (P = 0

  10. The effect of technical replicate (repeats) on Nix Pro Color Sensor™ measurement precision for meat: A case-study on aged beef colour stability.

    Science.gov (United States)

    Holman, Benjamin W B; Collins, Damian; Kilgannon, Ashleigh K; Hopkins, David L

    2018-01-01

    The Nix Pro Colour Sensor™ (NIX) can be potentially used to measure meat colour, but procedural guidelines that assure measurement reproducibility and repeatability (precision) must first be established. Technical replicate number (r) will minimise response variation, measureable as standard error of predicted mean (SEM), and contribute to improved precision. Consequently, we aimed to explore the effects of r on NIX precision when measuring aged beef colour (colorimetrics; L*, a*, b*, hue and chroma values). Each colorimetric SEM declined with increasing r to indicate improved precision and followed a diminishing rate of improvement that allowed us to recommend r=7 for meat colour studies using the NIX. This definition was based on practical limitations and a* variability, as additional r would be required if other colorimetrics or advanced levels of precision are necessary. Beef ageing and display period, holding temperature, loin and sampled portion were also found to contribute to colorimetric variation, but were incorporated within our definition of r. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  11. Collisional stripping of planetary crusts

    Science.gov (United States)

    Carter, Philip J.; Leinhardt, Zoë M.; Elliott, Tim; Stewart, Sarah T.; Walter, Michael J.

    2018-02-01

    Geochemical studies of planetary accretion and evolution have invoked various degrees of collisional erosion to explain differences in bulk composition between planets and chondrites. Here we undertake a full, dynamical evaluation of 'crustal stripping' during accretion and its key geochemical consequences. Crusts are expected to contain a significant fraction of planetary budgets of incompatible elements, which include the major heat producing nuclides. We present smoothed particle hydrodynamics simulations of collisions between differentiated rocky planetesimals and planetary embryos. We find that the crust is preferentially lost relative to the mantle during impacts, and we have developed a scaling law based on these simulations that approximates the mass of crust that remains in the largest remnant. Using this scaling law and a recent set of N-body simulations of terrestrial planet formation, we have estimated the maximum effect of crustal stripping on incompatible element abundances during the accretion of planetary embryos. We find that on average approximately one third of the initial crust is stripped from embryos as they accrete, which leads to a reduction of ∼20% in the budgets of the heat producing elements if the stripped crust does not reaccrete. Erosion of crusts can lead to non-chondritic ratios of incompatible elements, but the magnitude of this effect depends sensitively on the details of the crust-forming melting process on the planetesimals. The Lu/Hf system is fractionated for a wide range of crustal formation scenarios. Using eucrites (the products of planetesimal silicate melting, thought to represent the crust of Vesta) as a guide to the Lu/Hf of planetesimal crust partially lost during accretion, we predict the Earth could evolve to a superchondritic 176Hf/177Hf (3-5 parts per ten thousand) at present day. Such values are in keeping with compositional estimates of the bulk Earth. Stripping of planetary crusts during accretion can lead to

  12. DEMAND FOR BEEF IN THE PROVINCE OF YOGYAKARTA

    Directory of Open Access Journals (Sweden)

    Sulistiya

    2014-07-01

    Full Text Available RACT Protein consumption level of society in Yogyakarta Province has yet to meet the target, but the beef is a source of animal protein that is easily obtainable. Therefore, research on the analysis of demand for beef in this province needs to be done. Objective: (1 Determine the factors that affect the demand for beef in Yogyakarta. (2 Determine the own price elasticity and income elasticity of demand for beef in this province, and to know the cross-price elasticity of demand for beef to changes in the price of mutton, chicken, rice, and cooking oil. Metode: descriptive statistics, followed by inductive statistics , and hypothesis testing. The data used are primary and secondary data. Data were analyzed by multiple linear regression with the value of t and F tests, and analysis of the coefficient of determination. Results: Taken together, the factors that affect the demand for beef in the province is the price of beef, mutton, chicken, rice, cooking oil, income, number of inhabitants. Individually, beef demand is influenced by the price of beef and income residents. Beef inelastic demand means that beef is the daily necessities that are affordable and easy to obtain population of Yogyakarta Province. The increase in income population does not add to demand for beef. Substitutes of beef in the province is goat and chicken, while the complementary goods are rice and cooking oil.

  13. Effect of feeding period for dry cull cows on carcass quality, meat quality, and consumer reactions to loin steaks

    DEFF Research Database (Denmark)

    Madsen, Niels T.; Vestergaard, Mogens; Bredahl, Lone

    2003-01-01

    A major part of the beef marketed for Danish retail consumers originates from dairy cows slaughtered when the are culled from milk production. As these cows are often slaughtered at varios stages of lactation and with variable degrees of fatness the meat is often criticised for having a considera......A major part of the beef marketed for Danish retail consumers originates from dairy cows slaughtered when the are culled from milk production. As these cows are often slaughtered at varios stages of lactation and with variable degrees of fatness the meat is often criticised for having...... thoroughly. The present study comprise two trials. The results of both the first and second trail, including 62 cows in 2002, are reported here....

  14. Selected nutrient contents, fatty acid composition, including conjugated linoleic acid, and retention values in separable lean from lamb rib loins as affected by external fat and cooking method.

    Science.gov (United States)

    Badiani, Anna; Montellato, Lara; Bochicchio, Davide; Anfossi, Paola; Zanardi, Emanuela; Maranesi, Magda

    2004-08-11

    Proximate composition and fatty acid profile, conjugated linoleic acid (CLA) isomers included, were determined in separable lean of raw and cooked lamb rib loins. The cooking methods compared, which were also investigated for cooking yields and true nutrient retention values, were dry heating of fat-on cuts and moist heating of fat-off cuts; the latter method was tested as a sort of dietetic approach against the more traditional former type. With significantly (P cooking losses, dry heating of fat-on rib-loins produced slightly (although only rarely significantly) higher retention values for all of the nutrients considered, including CLA isomers. On the basis of the retention values obtained, both techniques led to a minimum migration of lipids into the separable lean, which was higher (P cooking of the class of CLA isomers (including that of the nutritionally most important isomer cis-9,trans-11) was more similar to that of the monounsaturated than the polyunsaturated fatty acids.

  15. Changes in the phospholipid fraction of intramuscular fat from pork loin (fresh and marinated) with different irradiation and packaging during storage

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Marquez, I.; Narvaez-Rivas, M.; Gallardo, E.; Cabeza, C. M.; Leon-Camacho, M.

    2013-05-01

    A study on the effect of E-beam (1 and 2 kGy) on the phospholipid classes of fresh and marinated pork loin stored at 4 degree centigrade and 8 degree centigrade under different atmospheres (air, vacuum and carbon dioxide enriched atmospheres) has been conducted. This is the first time that a study of this kind has been carried out on these types of samples. The combined statistical treatment of the distinct variables shows that minor changes (cardiol pin and sphingomyelin between both types of loin, cardiolipin vs storage temperatures and phosphatidylethanolamine vs the modified atmospheres) are produced in the individual phospholipids subjected to the different selected conditions. The more relevant result was that no effect of the irradiation doses on the phospholipids classes was found, so the E-beam can be considered a useful tool to extend the shelf-life of fresh meat without changes in the phospholipid fraction. (Author) 24 refs.

  16. 3D silicon strip detectors

    International Nuclear Information System (INIS)

    Parzefall, Ulrich; Bates, Richard; Boscardin, Maurizio; Dalla Betta, Gian-Franco; Eckert, Simon; Eklund, Lars; Fleta, Celeste; Jakobs, Karl; Kuehn, Susanne; Lozano, Manuel; Pahn, Gregor; Parkes, Chris; Pellegrini, Giulio; Pennicard, David; Piemonte, Claudio; Ronchin, Sabina; Szumlak, Tomasz; Zoboli, Andrea; Zorzi, Nicola

    2009-01-01

    While the Large Hadron Collider (LHC) at CERN has started operation in autumn 2008, plans for a luminosity upgrade to the Super-LHC (sLHC) have already been developed for several years. This projected luminosity increase by an order of magnitude gives rise to a challenging radiation environment for tracking detectors at the LHC experiments. Significant improvements in radiation hardness are required with respect to the LHC. Using a strawman layout for the new tracker of the ATLAS experiment as an example, silicon strip detectors (SSDs) with short strips of 2-3 cm length are foreseen to cover the region from 28 to 60 cm distance to the beam. These SSD will be exposed to radiation levels up to 10 15 N eq /cm 2 , which makes radiation resistance a major concern for the upgraded ATLAS tracker. Several approaches to increasing the radiation hardness of silicon detectors exist. In this article, it is proposed to combine the radiation hard 3D-design originally conceived for pixel-style applications with the benefits of the established planar technology for strip detectors by using SSDs that have regularly spaced doped columns extending into the silicon bulk under the detector strips. The first 3D SSDs to become available for testing were made in the Single Type Column (STC) design, a technological simplification of the original 3D design. With such 3D SSDs, a small number of prototype sLHC detector modules with LHC-speed front-end electronics as used in the semiconductor tracking systems of present LHC experiments were built. Modules were tested before and after irradiation to fluences of 10 15 N eq /cm 2 . The tests were performed with three systems: a highly focused IR-laser with 5μm spot size to make position-resolved scans of the charge collection efficiency, an Sr 90 β-source set-up to measure the signal levels for a minimum ionizing particle (MIP), and a beam test with 180 GeV pions at CERN. This article gives a brief overview of the results obtained with 3D-STC-modules.

  17. 3D silicon strip detectors

    Energy Technology Data Exchange (ETDEWEB)

    Parzefall, Ulrich [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany)], E-mail: ulrich.parzefall@physik.uni-freiburg.de; Bates, Richard [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Boscardin, Maurizio [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy); Dalla Betta, Gian-Franco [INFN and Universita' di Trento, via Sommarive 14, 38050 Povo di Trento (Italy); Eckert, Simon [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Eklund, Lars; Fleta, Celeste [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Jakobs, Karl; Kuehn, Susanne [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Lozano, Manuel [Instituto de Microelectronica de Barcelona, IMB-CNM, CSIC, Barcelona (Spain); Pahn, Gregor [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Parkes, Chris [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Pellegrini, Giulio [Instituto de Microelectronica de Barcelona, IMB-CNM, CSIC, Barcelona (Spain); Pennicard, David [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Piemonte, Claudio; Ronchin, Sabina [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy); Szumlak, Tomasz [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Zoboli, Andrea [INFN and Universita' di Trento, via Sommarive 14, 38050 Povo di Trento (Italy); Zorzi, Nicola [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy)

    2009-06-01

    While the Large Hadron Collider (LHC) at CERN has started operation in autumn 2008, plans for a luminosity upgrade to the Super-LHC (sLHC) have already been developed for several years. This projected luminosity increase by an order of magnitude gives rise to a challenging radiation environment for tracking detectors at the LHC experiments. Significant improvements in radiation hardness are required with respect to the LHC. Using a strawman layout for the new tracker of the ATLAS experiment as an example, silicon strip detectors (SSDs) with short strips of 2-3 cm length are foreseen to cover the region from 28 to 60 cm distance to the beam. These SSD will be exposed to radiation levels up to 10{sup 15}N{sub eq}/cm{sup 2}, which makes radiation resistance a major concern for the upgraded ATLAS tracker. Several approaches to increasing the radiation hardness of silicon detectors exist. In this article, it is proposed to combine the radiation hard 3D-design originally conceived for pixel-style applications with the benefits of the established planar technology for strip detectors by using SSDs that have regularly spaced doped columns extending into the silicon bulk under the detector strips. The first 3D SSDs to become available for testing were made in the Single Type Column (STC) design, a technological simplification of the original 3D design. With such 3D SSDs, a small number of prototype sLHC detector modules with LHC-speed front-end electronics as used in the semiconductor tracking systems of present LHC experiments were built. Modules were tested before and after irradiation to fluences of 10{sup 15}N{sub eq}/cm{sup 2}. The tests were performed with three systems: a highly focused IR-laser with 5{mu}m spot size to make position-resolved scans of the charge collection efficiency, an Sr{sup 90}{beta}-source set-up to measure the signal levels for a minimum ionizing particle (MIP), and a beam test with 180 GeV pions at CERN. This article gives a brief overview of

  18. Dynamic Underground Stripping Demonstration Project

    International Nuclear Information System (INIS)

    Aines, R.; Newmark, R.; McConachie, W.; Rice, D.; Ramirez, A.; Siegel, W.; Buettner, M.; Daily, W.; Krauter, P.; Folsom, E.; Boegel, A.J.; Bishop, D.; udel, K.

    1992-03-01

    LLNL is collaborating with the UC Berkeley College of Engineering to develop and demonstrate a system of thermal remediation and underground imaging techniques for use in rapid cleanup of localized underground spills. Called ''Dynamic Stripping'' to reflect the rapid and controllable nature of the process, it will combine steam injection, direct electrical heating, and tomographic geophysical imaging in a cleanup of the LLNL gasoline spill. In the first 8 months of the project, a Clean Site engineering test was conducted to prove the field application of the techniques before moving to the contaminated site in FY 92

  19. Efeito do grupo genético sobre as características de carcaça e maciez da carne fresca e maturada de bovinos superprecoces Effect of genetic group on carcass traits and fresh and aged beef tenderness from young cattle

    Directory of Open Access Journals (Sweden)

    Waldmaryan Bianchini

    2007-12-01

    weaned at 8 months of age in system creep-feeding and later confined for 150 days until they reach the slaughter weight above 465 kg and slaughtered in commercial abattoir. The pH values and temperature during carcass cooling was similar for all of the genetic groups. In the same way, the variables cold carcass, forequarter and hindquarter, did not show any differences among the genetic groups. The beef cuts were quite homogeneous, excepting the strip loin and the tenderloin that were larger perceptually for Simmental. The Nellore and ½ Simmental breeds presented larger shear force (4.98 and 4.45 kgf than Simmental and Simbrasil (3.13 and 3.33 kgf. However, after the meat ageing for 7 days, no differences were verified among the groups for tenderness values. The losses by evaporation and leaking were higher for non aged Simmental and Simbrasil beef cuts; however, seven days of ageing those losses showed no differences. The system of production of young bulls bovines produces carcasses and cuts similar among the different breed studied. With seven days of maturation Nellore meat tenderness was similar to the other genetic groups used in this study.

  20. Physical properties of Gelidium corneum-gelatin blend films containing grapefruit seed extract or green tea extract and its application in the packaging of pork loins.

    Science.gov (United States)

    Hong, Y-H; Lim, G-O; Song, K B

    2009-01-01

    Edible Gelidium corneum-gelatin (GCG) blend films containing grapefruit seed extract (GFSE) or green tea extract (GTE) were manufactured, and the quality of pork loins packed with the film during storage was determined. Tensile strength (TS) and water vapor permeability (WVP) of the films containing GFSE or GTE were better than those of the control. The film's antimicrobial activity against Escherichia coli O157:H7 and Listeria monocytogenes increased with increasing antimicrobial concentration, resulting in a decrease in the populations of bacteria by 0.77 to 2.08 and 0.91 to 3.30 log CFU/g, respectively. Pork loin samples were inoculated with E. coli O157:H7 and L. monocytogenes. The samples packed with the GCG film containing GFSE (0.08%) or GTE (2.80%) had a decrease in the populations of E. coli O157:H7 and L. monocytogenes of 0.69 to 1.11 and 1.05 to 1.14 log CFU/g, respectively, compared to the control after 4 d of storage. The results showed that the quality of pork loins during storage could be improved by packaging them with the GCG film containing GFSE or GTE.

  1. Severe loin pain following renal biopsy in a high-risk patient: A case report of a rare combination of pseudoaneurysm and arterio-venous fistula

    Directory of Open Access Journals (Sweden)

    Desai Madhav

    2011-01-01

    Full Text Available We report a 50-year-old male patient with diabetes mellitus and hypertension who presented with low-grade fever, anuria and renal failure. He had no prior history of nephropathy and retinopathy. Since anuria persisted, a renal biopsy was performed using automated gun, under ultrasound guidance. Two hours after the renal biopsy was performed, the patient developed severe left loin pain that required analgesics and sedatives. Ultrasound of the abdomen performed immediately, two hours and four hours after the biopsy, did not reveal any hematoma. The hemoglobin was stable when the patient developed loin pain, but after eight hours decreased to 9.1 g/dL, and computed tomography scan of the abdomen revealed a big peri-nephric hematoma around the left kidney. He was managed with blood transfusions and a selective angiogram was done. It revealed a pseudoaneurysm and arterio-venous fistula from the segmental artery of lower pole of the left kidney; both were closed by using microcoils and liquid embolic agent N-butyl-cyanoacrylate (NBCA. The only risk factor the patient had at the time of renal biopsy was severe renal failure. Our case suggests that severe loin pain immediately after renal biopsy in a patient with renal failure warrants careful follow-up of hemoglobin and imaging, even if initial imaging is normal. Further fall of hemoglobin necessitates early evaluation with angiogram, which helps in diagnosing the treatable, although rare, complications like pseudoaneurysm and arterio-venous fistula.

  2. HEDONIC DEMAND ANALYSIS FOR BEEF IN BENIN METROPOLIS

    African Journals Online (AJOL)

    BIUAGRIC2

    2013-02-11

    Feb 11, 2013 ... implicit demand for beef within the framework of a hedonic analysis, and the implicit or shadow price of beef were examined. Primary data ... results of the Hedonic analysis showed that, with an average unit price of N836.57 for beef, a consumer is strongly willing to pay ... method and strategies. Lancaster ...

  3. Depletive stripping chronopotentiometry : a major step forward in electrochemical stripping techniques for metal ion speciation analysis

    NARCIS (Netherlands)

    Town, R.M.; Leeuwen, van H.P.

    2004-01-01

    A comparative evaluation of the utility of the various modes of stripping chronopotentiometry (SCP) for trace metal speciation analysis is presented in the broad context of stripping voltammetric techniques. The remarkable fundamental advantages of depletive SCP at scanned deposition potential

  4. Potential profile in a conducting polymer strip

    DEFF Research Database (Denmark)

    Bay, Lasse; West, Keld; Vlachopoulos, Nikolaos

    2002-01-01

    Many conjugated polymers show an appreciable difference in volume between their oxidized and reduced forms. This property can be utilized in soft electrochemically driven actuators, "artificial muscles". Several geometries have been proposed for the conversion of the volume expansion into useful...... mechanical work. In a particularly simple geometry, the length change of polymer strips is exploited. The polymer strips are connected to the driving circuit at the end of the strip that is attached to the support of the device. The other end of the strip is connected to the load. The advantage of this set...

  5. Optimizing the Stripping Procedure for LHCb

    CERN Document Server

    Richardson, Rachel

    2017-01-01

    The LHCb experiment faces a major challenge from the large amounts of data received while the LHC is running. The ability to sort this information in a useful manner is important for working groups to perform physics analyses. Both hardware and software triggers are used to decrease the data rate and then the stripping process is used to sort the data into streams and further into stripping lines. This project studies the hundreds of stripping lines to look for overlaps between them in order to make the stripping process more efficient.

  6. Study on lifetime of C stripping foils

    International Nuclear Information System (INIS)

    Zhang Hongbin; Lu Ziwei; Zhao Yongtao; Li Zhankui; Xu Hushan; Xiao Guoqing; Wang Yuyu; Zhang Ling; Li Longcai; Fang Yan

    2007-01-01

    The carbon stripping foils can be prepared with the AC and DC arc discharge methods, or even sandwiched with AC-DC alternative layers. The lifetime of the carbon stripping foils of 19 μg/cm 2 prepared with different methods and/or structures was measured. The factors affecting the bombarding lifetime of the carbon stripping foils, especially the method of the foil preparation and the structure of the carbon stripping foils, were discussed. It is observed that the foils prepared with the DC arc discharge method have a longer bombarding lifetime than those prepared with the AC arc discharge method. (authors)

  7. Where's the beef? Retail channel choice and beef preferences in Argentina.

    Science.gov (United States)

    Colella, Florencia; Ortega, David L

    2017-11-01

    Argentinean beef is recognized and demanded internationally. Locally, consumers are often unable to afford certified beef products, and may rely on external cues to determine beef quality. Uncovering demand for beef attributes and marketing them accordingly, may require an understanding of consumers' product purchasing strategies, which involves retailer choice. We develop a framework utilizing latent class analysis to identify consumer groups with different retailer preferences, and separately estimate their demand for beef product attributes. This framework accounts for the interrelationship between consumers' choice of retail outlets and beef product preferences. Our analysis of data from the city of Buenos Aires identifies two groups of consumers, a convenience- (67%) and a service- (33%) oriented group. We find significant differences in demand for beef attributes across these groups, and find that the service oriented group, while not willing to pay for credence attributes, relies on a service-providing retailer-namely a butcher-as a source of product quality assurance. Copyright © 2017. Published by Elsevier Ltd.

  8. BeefTracker: Spatial Tracking and Geodatabase for Beef Herd Sustainability and Lifecycle Analysis

    Science.gov (United States)

    Oltjen, J. W.; Stackhouse, J.; Forero, L.; Stackhouse-Lawson, K.

    2015-12-01

    We have developed a web-based mapping platform named "BeefTracker" to provide beef cattle ranchers a tool to determine how cattle production fits within sustainable ecosystems and to provide regional data to update beef sustainability lifecycle analysis. After initial identification and mapping of pastures, herd data (class and number of animals) are input on a mobile device in the field with a graphical pasture interface, stored in the cloud, and linked via the web to a personal computer for inventory tracking and analysis. Pasture use calculated on an animal basis provides quantifiable data regarding carrying capacity and subsequent beef production to provide more accurate data inputs for beef sustainability lifecycle analysis. After initial testing by university range scientists and ranchers we have enhanced the BeefTracker application to work when cell service is unavailable and to improve automation for increased ease of use. Thus far experiences with BeefTracker have been largely positive, due to livestock producers' perception of the need for this type of software application and its intuitive interface. We are now in the process of education to increase its use throughout the U.S.

  9. The Whipple Strip Sky Survey

    Science.gov (United States)

    Kertzman, M. P.

    As part of the normal operation of the Whipple 10m Gamma Ray telescope, ten minute drift scan “zenith” runs are made each night of observation for use as calibration. Most of the events recorded during a zenith run are due to the background of cosmic ray showers. However, it would be possible for a hitherto unknown source of gamma rays to drift through the field. This paper reports the results of a search for serendipitous high energy gamma ray sources in the Whipple 10m nightly calibration zenith data. From 2000-2004 nightly calibration runs were taken at an elevation of 89 º. A 2- D analysis of these drift scan runs produces a strip of width ~ 3.5º in declination and spanning the full range of right ascension. In the 2004-05 observing season the calibration runs were taken at elevations of 86° and 83°. Beginning in the 2005-06 season, the nightly calibration runs were taken at an elevation of 80º. Collectively, these drift scans cover a strip approximately 12.5º wide in declination, centered at declination 37.18º, and spanning the full range of RA. The analysis procedures developed for drift scan data, the sensitivity of the method, and the results will be presented.

  10. Beef cow-calf production.

    Science.gov (United States)

    Feuz, Dillon M; Umberger, Wendy J

    2003-07-01

    Cow-calf production occurs in all 50 states over varied resource bases and under vastly different environmental conditions. Multiple breeds exist and management styles and objectives are as numerous as the number of cow-calf producers. There is not one area of the country, one breed of cattle, or one management style that is most profitable for producing cows and calves. There are, however, some common strategies that can be employed by cow-calf producers to enhance profitability. Costs need to be controlled without jeopardizing cow herd productivity or net returns. It appears that the cost associated with purchased and harvested feeds varies considerably across operations. Understanding cyclic and seasonal price patterns, weight-price slides, cattle shrink, and other marketing costs can help producers enhance their profit by marketing (and not by just selling) their cattle. Producers with superior cattle genetics can become part of a specific alliance or, at a minimum, document the performance of their cattle so that they can get paid for the superior genetics. The beef industry is changing and will likely continue to change. Cow-calf producers will need to examine their own management practices to determine whether they are optimal for the current industry. Those producers who are most adept at matching their management abilities to their cattle type, their resource base, and the appropriate market outlet will be the most successful in the future.

  11. Effect of added phosphate and type of cooking method on physico-chemical and sensory features of cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Pérez-Palacios, Trinidad; Ruiz, Jorge

    2014-05-01

    This study evaluated the effect of brining with phosphates on the physico-chemical and sensory features of sous-vide and roasted cooked lamb. Lamb loins (n=48) were injected with either 10% w/w of distilled water or a solution containing 0.2% or 0.4% (w/v) of a mixture of phosphate salts. After injection, samples were either sous-vide cooked (12h-60°C) or oven roasted (180°C until 73°C of core temp.). Expressible moisture, cooking loss, instrumental color, pH, water holding capacity, instrumental texture and sensory properties were evaluated. Brining with phosphates led to lower cooking loss in both sous-vide and oven roasted samples, but only the former showed significantly higher moisture content. Phosphates increased instrumental hardness and shear force values in sous-vide samples, while this effect was not as evident in roasted ones. Toughness was reduced and juiciness was improved as a consequence of phosphate addition. Overall, injection of a phosphate solution appears as a potential procedure for improving sensory textural features of cooked lamb whole cuts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Stability of Antiradical Activity of Protein Extracts and Hydrolysates from Dry-Cured Pork Loins with Probiotic Strains of LAB

    Directory of Open Access Journals (Sweden)

    Paulina Kęska

    2018-04-01

    Full Text Available The application of starter cultures to improve quality and safety has become a very common practice in the meat industry. Probiotic strains of lactic acid bacteria (LAB can also bring health benefits by releasing bioactive peptides. The aim of this work was to evaluate the stability of antiradical activity of protein extracts from LAB-inoculated dry-cured pork loins during long-term aging and evaluate their hydrolysates after simulated gastrointestinal digestion. Analyses of hydrolysates by using liquid chromatography-tandem mass spectrometry (LC-MS/MS were strengthened with in silico analysis. The highest antiradical activity of the protein extracts was observed after 180 days of aging. The influence of the strain used (LOCK, BAUER, or BB12 on the inactivation ability of ABTS radicals varied during long-term aging. The IC50 values indicated the higher antiradical properties of salt-soluble (SSF compared to water-soluble fraction (WSF of proteins. The peptides generated by in vitro digestion have MW between 700 and 4232 Da and their length ranged from 5 to 47 amino acids in a sequence where Leu, Pro, Lys, Glu, and His had the largest share. This study demonstrates that the degradation of pork muscle proteins during gastrointestinal digestion may give rise to a wide variety of peptides with antiradical properties.

  13. The 'KATOD-1' strip readout ASIC for cathode strip chamber

    International Nuclear Information System (INIS)

    Golutvin, I.A.; Gorbunov, N.V.; Karzhavin, V.Yu.; Khabarov, V.S.; Movchan, S.A.; Smolin, D.A.; Dvornikov, O.V.; Shumejko, N.M.; Chekhovskij, V.A.

    2001-01-01

    The 'KATOD-1', a 16-channels readout ASIC, has been designed to perform tests of P3 and P4 full-scale prototypes of the cathode strip chamber for the ME1/1 forward muon station of the Compact Muon Solenoid (CMS) experiment. The ASIC channel consists of two charge-sensitive preamplifiers, a three-stage shaper with cancellation, and an output driver. The ASIC is instrumented with control of gain, in the range of (-4.2 : +5.0) mV/fC, and control of output pulse-shape. The equivalent input noise is equal to 2400 e with the slope of 12 e/pF for detector capacity up to 200 pF. The peaking time is 100 ns for the chamber signal. The ASIC has been produced by a microwave Bi-jFET technology

  14. The "KATOD-1" Strip Readout ASIC for Cathode Strip Chamber

    CERN Document Server

    Golutvin, I A; Karjavin, V Yu; Khabarov, V S; Movchan, S A; Smolin, D A; Dvornikov, O V; Shumeiko, N M; Tchekhovski, V A

    2001-01-01

    The "KATOD-1", a 16-channels readout ASIC, has been designed to perform tests of P3 and P4 full-scale prototypes of the cathode strip chamber for the ME1/1 forward muon station of the Compact Muon Solenoid (CMS) experiment. The ASIC channel consists of two charge-sensitive preamplifiers, a three-stage shaper with tail cancellation, and an output driver. The ASIC is instrumented with control of gain, in the range of (-4.2\\div +5.0) mV/fC, and control of output pulse-shape. The equivalent input noise is equal to 2400 e with the slope of 12 e/pF for detector capacity up to 200 pF. The peaking time is 100 ns for the chamber signal. The ASIC has been produced by a microwave Bi-jFET technology.

  15. Incorporating reproductive management of beef heifers into a veterinary practice.

    Science.gov (United States)

    Poock, Scott E; Payne, Craig A

    2013-11-01

    Veterinarians play an important role in reproductive management of dairy herds across the United States; however, in many cases, their involvement in reproductive management of beef herds has been limited. The reasons for this vary; however, there are ways for veterinarians to become more actively involved in reproductive management of US beef herds. Veterinarians can have an impact on producers' profits by implementing their skills and knowledge to beef heifer development programs. This article provides an overview of the services veterinarians can provide to beef cattle producers that pertain to reproductive management of replacement beef heifers. Published by Elsevier Inc.

  16. Impact of product familiarity on beef quality perception

    DEFF Research Database (Denmark)

    Banovic, Marija; Fontes, Magda Aguiar; Barreira, Maria Madalena

    2012-01-01

    This study examines the use of intrinsic and extrinsic cues in beef quality perception at the point of purchase and upon consumption by consumers with varying levels of familiarity with a particular beef product. High-familiarity consumers tend to use the color of the meat to assess beef quality......, whereas low-familiarity consumers tend to believe that the brand is the most valid cue for assessing beef quality. However, due to the lack of consistency in sensory beef quality, high-familiarity consumers’ ability to form quality expectations that are predictive of their quality experience is no better...

  17. IMPACT OF EXPORTS ON THE U.S. BEEF INDUSTRY

    OpenAIRE

    Van Eenoo, Edward, Jr.; Peterson, Everett B.; Purcell, Wayne D.

    2000-01-01

    Policy and programmatic decisions dealing with beef exports require good information as to the impact of exports on the domestic beef industry. This paper utilizes a partial equilibrium model of the world beef market to assess the impacts on the U.S. beef sector of increases in real income in major beef importing countries, the impacts of changes in the prices of pork and poultry products, and the impacts of changes in the price of feedgrains. A one percent increase in real GDP in Canada, Jap...

  18. The beef market in the European Union

    DEFF Research Database (Denmark)

    Nielsen, Niels Asger; Jeppesen, Lisbeth Fruensgaard

    characteristics determining the consumers' value perception of a piece of meat appear to be fat, tenderness, taste and freshness. 7. The primary production of beef is fragmented in most European countries and the average number of cattle at a European cattle farm is only slowly rising. Two thirds of the cows...... of cattle going through markets is declining. 10. Product quality has been very difficult to control in the beef sector. The cattle supplied for slaughtering is of a very varying quality with regard to important consumer-oriented quality characteristics like tenderness and taste, and the lack...

  19. Mechanical behaviour of a creased thin strip

    Directory of Open Access Journals (Sweden)

    J. Liu

    2018-02-01

    Full Text Available In this study the mechanical behaviour of a creased thin strip under opposite-sense bending was investigated. It was found that a simple crease, which led to the increase of the second moment of area, could significantly alter the overall mechanical behaviour of a thin strip, for example the peak moment could be increased by 100 times. The crease was treated as a cylindrical segment of a small radius. Parametric studies demonstrated that the geometry of the strip could strongly influence its flexural behaviour. We showed that the uniform thickness and the radius of the creased segment had the greatest and the least influence on the mechanical behaviour, respectively. We further revealed that material properties could dramatically affect the overall mechanical behaviour of the creased strip by gradually changing the material from being linear elastic to elastic-perfect plastic. After the formation of the fold, the moment of the two ends of the strip differed considerably when the elasto-plastic materials were used, especially for materials with smaller tangent modulus in the plastic range. The deformation patterns of the thin strips from the finite element simulations were verified by physical models made of thin metal strips. The findings from this study provide useful information for designing origami structures for engineering applications using creased thin strips.

  20. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1978-01-01

    A bimetallic grid spacer is described comprising a grid structure of zircaloy formed by intersecting striplike members which define fuel element openings for receiving fuel elements and spring strips made of Inconel positioned within the grid structure for cooperating with the fuel elements to maintain them in their desired position. A plurality of these spring strips extend longitudinally between sides of the grid structure, being locked in position by the grid retaining strips. The fuel rods, which are disposed in the fuel openings formed in the grid structure, are positioned by means of the springs associated with the spring strips and a plurality of dimples which extend from the zircaloy grid structure into the openings. In one embodiment the strips are disposed in a plurality of arrays with those spring strip arrays situated in opposing diagonal quadrants of the grid structure extending in the same direction and adjacent spring strip arrays in each half of the spacer extending in relatively perpendicular directions. Other variations of the spring strip arrangements for a particular fuel design are disclosed herein

  1. CMS Silicon Strip Tracker Performance

    CERN Document Server

    Agram, Jean-Laurent

    2012-01-01

    The CMS Silicon Strip Tracker (SST), consisting of 9.6 million readout channels from 15148 modules and covering an area of 198 square meters, needs to be precisely calibrated in order to correctly reconstruct the events recorded. Calibration constants are derived from different workflows, from promptly reconstructed events with particles as well as from commissioning events gathered just before the acquisition of physics runs. The performance of the SST has been carefully studied since the beginning of data taking: the noise of the detector, data integrity, signal-over-noise ratio, hit reconstruction efficiency and resolution have been all investigated with time and for different conditions. In this paper we describe the reconstruction strategies, the calibration procedures and the detector performance results from the latest CMS operation.

  2. The CMS silicon strip tracker

    International Nuclear Information System (INIS)

    Focardi, E.; Albergo, S.; Angarano, M.; Azzi, P.; Babucci, E.; Bacchetta, N.; Bader, A.; Bagliesi, G.; Bartalini, P.; Basti, A.; Biggeri, U.; Bilei, G.M.; Bisello, D.; Boemi, D.; Bosi, F.; Borrello, L.; Bozzi, C.; Braibant, S.; Breuker, H.; Bruzzi, M.; Candelori, A.; Caner, A.; Castaldi, R.; Castro, A.; Catacchini, E.; Checcucci, B.; Ciampolini, P.; Civinini, C.; Creanza, D.; D'Alessandro, R.; Da Rold, M.; Demaria, N.; De Palma, M.; Dell'Orso, R.; Marina, R. Della; Dutta, S.; Eklund, C.; Elliott-Peisert, A.; Feld, L.; Fiore, L.; French, M.; Freudenreich, K.; Fuertjes, A.; Giassi, A.; Giraldo, A.; Glessing, B.; Gu, W.H.; Hall, G.; Hammerstrom, R.; Hebbeker, T.; Hrubec, J.; Huhtinen, M.; Kaminsky, A.; Karimaki, V.; Koenig, St.; Krammer, M.; Lariccia, P.; Lenzi, M.; Loreti, M.; Luebelsmeyer, K.; Lustermann, W.; Maettig, P.; Maggi, G.; Mannelli, M.; Mantovani, G.; Marchioro, A.; Mariotti, C.; Martignon, G.; Evoy, B. Mc; Meschini, M.; Messineo, A.; My, S.; Paccagnella, A.; Palla, F.; Pandoulas, D.; Parrini, G.; Passeri, D.; Pieri, M.; Piperov, S.; Potenza, R.; Raffaelli, F.; Raso, G.; Raymond, M.; Santocchia, A.; Schmitt, B.; Selvaggi, G.; Servoli, L.; Sguazzoni, G.; Siedling, R.; Silvestris, L.; Skog, K.; Starodumov, A.; Stavitski, I.; Stefanini, G.; Tempesta, P.; Tonelli, G.; Tricomi, A.; Tuuva, T.; Vannini, C.; Verdini, P.G.; Viertel, G.; Xie, Z.; Wang, Y.; Watts, S.; Wittmer, B.

    1999-01-01

    The Silicon Strip Tracker (SST) is the intermediate part of the CMS Central Tracker System. SST is based on microstrip silicon devices and in combination with pixel detectors and the Microstrip Gas Chambers aims at performing pattern recognition, track reconstruction and momentum measurements for all tracks with p T ≥2 GeV/c originating from high luminosity interactions at √s=14 TeV at LHC. We aim at exploiting the advantages and the physics potential of the precise tracking performance provided by the microstrip silicon detectors on a large scale apparatus and in a much more difficult environment than ever. In this paper we describe the actual SST layout and the readout system. (author)

  3. Ultrasonic examination of JBK-75 strip material

    International Nuclear Information System (INIS)

    Cook, K.V.; Cunningham, R.A. Jr.; Lewis, J.C.; McClung, R.W.

    1982-12-01

    An ultrasonic inspection system was assembled to inspect the JBK-75 stainless steel sheath material (for the Large Coil Project) for the Westinghouse-Airco superconducting magnet program. The mechanical system provided for handling the 180-kg (400-lb) coils of strip material [1.6 mm thick by 78 mm wide by 90 to 120 m long (0.064 by 3.07 in. by 300 to 400 ft)], feeding the strip through the ultrasonic inspection and cleaning stations, and respooling the coils. We inspected 54 coils of strip for both longitudinal and laminar flaws. Simulated flaws were used to calibrate both inspections. Saw-cut notches [0.28 mm deep (0.011 in., about 17% of the strip thickness)] were used to calibrate the longitudinal flaw inspections; 1.59-mm-diam (0.063-in.) flat-bottom holes drilled halfway through a calibration strip were used to calibrate the laminar flaw tests

  4. Model for prediction of strip temperature in hot strip steel mill

    International Nuclear Information System (INIS)

    Panjkovic, Vladimir

    2007-01-01

    Proper functioning of set-up models in a hot strip steel mill requires reliable prediction of strip temperature. Temperature prediction is particularly important for accurate calculation of rolling force because of strong dependence of yield stress and strip microstructure on temperature. A comprehensive model was developed to replace an obsolete model in the Western Port hot strip mill of BlueScope Steel. The new model predicts the strip temperature evolution from the roughing mill exit to the finishing mill exit. It takes into account the radiative and convective heat losses, forced flow boiling and film boiling of water at strip surface, deformation heat in the roll gap, frictional sliding heat, heat of scale formation and the heat transfer between strip and work rolls through an oxide layer. The significance of phase transformation was also investigated. Model was tested with plant measurements and benchmarked against other models in the literature, and its performance was very good

  5. Model for prediction of strip temperature in hot strip steel mill

    Energy Technology Data Exchange (ETDEWEB)

    Panjkovic, Vladimir [BlueScope Steel, TEOB, 1 Bayview Road, Hastings Vic. 3915 (Australia)]. E-mail: Vladimir.Panjkovic@BlueScopeSteel.com

    2007-10-15

    Proper functioning of set-up models in a hot strip steel mill requires reliable prediction of strip temperature. Temperature prediction is particularly important for accurate calculation of rolling force because of strong dependence of yield stress and strip microstructure on temperature. A comprehensive model was developed to replace an obsolete model in the Western Port hot strip mill of BlueScope Steel. The new model predicts the strip temperature evolution from the roughing mill exit to the finishing mill exit. It takes into account the radiative and convective heat losses, forced flow boiling and film boiling of water at strip surface, deformation heat in the roll gap, frictional sliding heat, heat of scale formation and the heat transfer between strip and work rolls through an oxide layer. The significance of phase transformation was also investigated. Model was tested with plant measurements and benchmarked against other models in the literature, and its performance was very good.

  6. Quality related principles of the South African beef classification ...

    African Journals Online (AJOL)

    ARC-IRENE

    expected eating experience of the loin muscles but not of higher connective .... which there are firstly gender and type limitations (e.g. bulls are not quality .... was found that A-age animals had significantly higher muscle collagen solubility, that.

  7. Characterization and functional inferences of a genome-wide DNA methylation profile in the loin ( muscle of swine

    Directory of Open Access Journals (Sweden)

    Woonsu Kim

    2018-01-01

    Full Text Available Objective DNA methylation plays a major role in regulating the expression of genes related to traits of economic interest (e.g., weight gain in livestock animals. This study characterized and investigated the functional inferences of genome-wide DNA methylome in the loin (longissimus dorsi muscle (LDM of swine. Methods A total of 8.99 Gb methylated DNA immunoprecipitation sequence data were obtained from LDM samples of eight Duroc pigs (four pairs of littermates. The reference pig genome was annotated with 78.5% of the raw reads. A total of 33,506 putative methylated regions (PMR were identified from methylated regions that overlapped at least two samples. Results Of these, only 3.1% were commonly observed in all eight samples. DNA methylation patterns between two littermates were as diverse as between unrelated individuals (p = 0.47, indicating that maternal genetic effects have little influence on the variation in DNA methylation of porcine LDM. The highest density of PMR was observed on chromosome 10. A major proportion (47.7% of PMR was present in the repeat regions, followed by introns (21.5%. The highest conservation of PMR was found in CpG islands (12.1%. These results show an important role for DNA methylation in species- and tissue-specific regulation of gene expression. PMR were also significantly related to muscular cell development, cell-cell communication, cellular integrity and transport, and nutrient metabolism. Conclusion This study indicated the biased distribution and functional role of DNA methylation in gene expression of porcine LDM. DNA methylation was related to cell development, cell-cell communication, cellular integrity and transport, and nutrient metabolism (e.g., insulin signaling pathways. Nutritional and environmental management may have a significant impact on the variation in DNA methylation of porcine LDM.

  8. Prototype Strip Barrel Modules for the ATLAS ITk Strip Detector

    CERN Document Server

    Sawyer, Craig; The ATLAS collaboration

    2017-01-01

    The module design for the Phase II Upgrade of the new ATLAS Inner Tracker (ITk) detector at the LHC employs integrated low mass assembly using single-sided flexible circuits with readout ASICs and a powering circuit incorporating control and monitoring of HV, LV and temperature on the module. Both readout and powering circuits are glued directly onto the silicon sensor surface resulting in a fully integrated, extremely low radiation length module which simultaneously reduces the material requirements of the local support structure by allowing a reduced width stave structure to be employed. Such a module concept has now been fully demonstrated using so-called ABC130 and HCC130 ASICs fabricated in 130nm CMOS technology to readout ATLAS12 n+-in-p silicon strip sensors. Low voltage powering for these demonstrator modules has been realised by utilising a DCDC powerboard based around the CERN FEAST ASIC. This powerboard incorporates an HV multiplexing switch based on a Panasonic GaN transistor. Control and monitori...

  9. Charge collection in silicon strip detectors

    International Nuclear Information System (INIS)

    Kraner, H.W.; Beuttenmuller, R.; Ludlam, T.; Hanson, A.L.; Jones, K.W.; Radeka, V.; Heijne, E.H.M.

    1982-11-01

    The use of position sensitive silicon detectors as very high resolution tracking devices in high energy physics experiments has been a subject of intense development over the past few years. Typical applications call for the detection of minimum ionizing particles with position measurement accuracy of 10 μm in each detector plane. The most straightforward detector geometry is that in which one of the collecting electrodes is subdivided into closely spaced strips, giving a high degree of segmentation in one coordinate. Each strip may be read out as a separate detection element, or, alternatively, resistive and/or capacitive coupling between adjacent strips may be exploited to interpolate the position via charge division measrurements. With readout techniques that couple several strips, the numer of readout channels can, in principle, be reduced by large factors without sacrificing the intrinsic position accuracy. The testing of individual strip properties and charge division between strips has been carried out with minimum ionizing particles or beams for the most part except in one case which used alphs particless scans. This paper describes the use of a highly collimated MeV proton beam for studies of the position sensing properties of representative one dimensional strip detectors

  10. Transfusion and blood donation in comic strips.

    Science.gov (United States)

    Lefrère, Jean-Jacques; Danic, Bruno

    2013-07-01

    The representation of blood transfusion and donation of blood in the comic strip has never been studied. The comic strip, which is a relatively recent art, emerged in the 19th century before becoming a mass medium during the 20th century. We have sought, by calling on collectors and using the resources of Internet, comic strips devoted, wholly or in part, to the themes of transfusion and blood donation. We present some of them here in chronologic order, indicating the title, country of origin, year of publication, and names of authors. The theme of the superhero using transfusion to transmit his virtues or his powers is repeated throughout the 20th century in North American comic strips. More recently, comic strips have been conceived from the outset with a promotional aim. They perpetuate positive images and are directed toward a young readership, wielding humor to reduce the fear of venipuncture. Few comic strips denounce the abuse of the commercialization of products derived from the human body. The image of transfusion and blood donation given by the comic strips is not to be underestimated because their readership is primarily children, some of whom will become blood donors. Furthermore, if some readers are transfused during their lives, the impact of a memory more or less conscious of these childhood readings may resurface, both in hopes and in fears. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. Brazilian consumers' perception of tenderness of beef steaks classified by shear force and taste Percepção pelos consumidores brasileiros da maciez da carne classificada pela força de cisalhamento e sabor

    Directory of Open Access Journals (Sweden)

    Eduardo Francisquine Delgado

    2006-06-01

    Full Text Available The knowledge of consumer perception of meat tenderness and taste is essential to forecast a Brazilian quality value-based beef market. This study aimed to verify perception of tender (WBSF 4.8 kg strip loin steak or uncharacteristic (calcium-treated/Ca-IM and normal (non-calcium/NO-Ca meat taste by consumers according to gender, age, education and income levels. Steaks were previously classified by shear force measurements as tender or tough. Each consumer was served a paired sample of one tender and of one tough steak, which were either Ca-IM or NO-Ca treated before tenderness classification. Three hundred and eight consumers answered a nine-point intensity (tenderness and hedonic (taste scales evaluation questionnaire. Among consumers, 82.2% indicated beef as first choice meat products, 75.3% had beef at least four times a week; 39.3% considered taste as the most important meat attribute and 30.2% considered tenderness; 75.8% were males; 73.6% were 21 to 55 years old; 56.7% had college education; 76.6% had monthly income higher than US $ 435,00. Tender steaks were scored highest (P O conhecimento da percepção de maciez e sabor da carne bovina pelo consumidor é essencial para vislumbrar um mercado brasileiro que pague por qualidade. Este estudo avaliou a percepção diferenciada de contra-filé macio (WBSF 4.8 kg, ou ainda com sabor não característico (imersão em Ca/ Ca-IM ou normal (sem cálcio/ NO-Ca de acordo com sexo, faixa etária, e nível de escolaridade formal e renda dos consumidores. Os bifes foram pareados em amostras macia/dura e Ca-IM/NO-Ca, e servidos a 308 consumidores que responderam a um questionário apresentando escalas de intensidade (maciez e hedônica (sabor de nove pontos. O perfil dos consumidores mostrava que: 82,2% indicaram carne bovina como sua primeira escolha entre as carnes; 75,3% consumiam carne bovina pelo menos quatro vezes por semana; 39,3% consideravam sabor como o atributo mais importante durante o

  12. Stripping voltammetry in environmental and food analysis.

    Science.gov (United States)

    Brainina, K Z; Malakhova, N A; Stojko, N Y

    2000-10-01

    The review covers over 230 papers published mostly in the last 5 years. The goal of the review is to attract the attention of researchers and users to stripping voltammetry in particular, its application in environmental monitoring and analysis of foodstuffs. The sensors employed are impregnated graphite, carbon paste, thick film carbon/graphite and thin film metallic electrodes modified in-situ or beforehand. Hanging mercury drop electrodes and mercury coated glassy carbon electrodes are also mentioned. Strip and long-lived sensors for portable instruments and flow through systems are discussed as devices for future development and application of stripping voltammetry.

  13. Hardness of approximation for strip packing

    DEFF Research Database (Denmark)

    Adamaszek, Anna Maria; Kociumaka, Tomasz; Pilipczuk, Marcin

    2017-01-01

    Strip packing is a classical packing problem, where the goal is to pack a set of rectangular objects into a strip of a given width, while minimizing the total height of the packing. The problem has multiple applications, for example, in scheduling and stock-cutting, and has been studied extensively......)-approximation by two independent research groups [FSTTCS 2016,WALCOM 2017]. This raises a questionwhether strip packing with polynomially bounded input data admits a quasi-polynomial time approximation scheme, as is the case for related twodimensional packing problems like maximum independent set of rectangles or two...

  14. Beef Species Symposium: an assessment of the 1996 Beef NRC: metabolizable protein supply and demand and effectiveness of model performance prediction of beef females within extensive grazing systems.

    Science.gov (United States)

    Waterman, R C; Caton, J S; Löest, C A; Petersen, M K; Roberts, A J

    2014-07-01

    Interannual variation of forage quantity and quality driven by precipitation events influence beef livestock production systems within the Southern and Northern Plains and Pacific West, which combined represent 60% (approximately 17.5 million) of the total beef cows in the United States. The beef cattle requirements published by the NRC are an important tool and excellent resource for both professionals and producers to use when implementing feeding practices and nutritional programs within the various production systems. The objectives of this paper include evaluation of the 1996 Beef NRC model in terms of effectiveness in predicting extensive range beef cow performance within arid and semiarid environments using available data sets, identifying model inefficiencies that could be refined to improve the precision of predicting protein supply and demand for range beef cows, and last, providing recommendations for future areas of research. An important addition to the current Beef NRC model would be to allow users to provide region-specific forage characteristics and the ability to describe supplement composition, amount, and delivery frequency. Beef NRC models would then need to be modified to account for the N recycling that occurs throughout a supplementation interval and the impact that this would have on microbial efficiency and microbial protein supply. The Beef NRC should also consider the role of ruminal and postruminal supply and demand of specific limiting AA. Additional considerations should include the partitioning effects of nitrogenous compounds under different physiological production stages (e.g., lactation, pregnancy, and periods of BW loss). The intent of information provided is to aid revision of the Beef NRC by providing supporting material for changes and identifying gaps in existing scientific literature where future research is needed to enhance the predictive precision and application of the Beef NRC models.

  15. Spray rolling aluminum alloy strip

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, Kevin M.; Delplanque, J.-P.; Johnson, S.B.; Lavernia, E.J.; Zhou, Y.; Lin, Y

    2004-10-10

    Spray rolling combines spray forming with twin-roll casting to process metal flat products. It consists of atomizing molten metal with a high velocity inert gas, cooling the resultant droplets in flight and directing the spray between mill rolls. In-flight convection heat transfer from atomized droplets teams with conductive cooling at the rolls to rapidly remove the alloy's latent heat. Hot deformation of the semi-solid material in the rolls results in fully consolidated, rapidly solidified product. While similar in some ways to twin-roll casting, spray rolling has the advantage of being able to process alloys with broad freezing ranges at high production rates. This paper describes the process and summarizes microstructure and tensile properties of spray-rolled 2124 and 7050 aluminum alloy strips. A Lagrangian/Eulerian poly-dispersed spray flight and deposition model is described that provides some insight into the development of the spray rolling process. This spray model follows droplets during flight toward the rolls, through impact and spreading, and includes oxide film formation and breakup when relevant.

  16. The Panda Strip Asic: Pasta

    Science.gov (United States)

    Lai, A.

    2018-01-01

    PASTA is the 64 channel front-end chip, designed in a 110 nm CMOS technology to read out the strip sensors of the Micro Vertex Detector (MVD) of the PANDA experiment. This chip provides high resolution timestamp and deposited charge information by means of the time-over-threshold technique. Its working principle is based on a predecessor, the TOFPET ASIC, that was designed for medical applications. A general restructuring of the architecture was needed, in order to meet the specific requirements imposed by the physics programme of PANDA, especially in terms of radiation tolerance, spatial constraints, and readout in absence of a first level hardware trigger. The first revision of PASTA is currently under evaluation at the Forschungszentrum Jülich, where a data acquisition system dedicated to the MVD prototypes has been developed. This paper describes the main aspect of the chip design, gives an overview of the data acquisition system used for the verification, and shows the first results regarding the performance of PASTA.

  17. Dynamic underground stripping demonstration project

    International Nuclear Information System (INIS)

    Newmark, R.L.

    1992-04-01

    LLNL is collaborating with the UC Berkeley College of Engineering to develop and demonstrate a system of thermal remediation techniques for rapid cleanup of localized underground spills. Called dynamic stripping to reflect the rapid and controllable nature of the process, it will combine steam injection, direct electrical heating, and tomographic geophysical imaging in a cleanup of the LLNL gasoline spill. In the first eight months of the project, a Clean Site engineering test was conducted to prove the field application of the techniques. Tests then began on the contaminated site in FY 1992. This report describes the work at the Clean Site, including design and performance criteria, test results, interpretations, and conclusions. We fielded 'a wide range of new designs and techniques, some successful and some not. In this document, we focus on results and performance, lessons learned, and design and operational changes recommended for work at the contaminated site. Each section focuses on a different aspect of the work and can be considered a self-contained contribution

  18. Do beef risk perceptions or risk attitudes have a greater effect on the beef purchase decisions of Canadian consumers?

    Science.gov (United States)

    Yang, Jun; Goddard, Ellen

    2011-01-01

    Cluster analysis is applied in this study to group Canadian households by two characteristics, their risk perceptions and risk attitudes toward beef. There are some similarities in demographic profiles, meat purchases, and bovine spongiform encephalopathy (BSE) media recall between the cluster that perceives beef to be the most risky and the cluster that has little willingness to accept the risks of eating beef. There are similarities between the medium risk perception cluster and the medium risk attitude cluster, as well as between the cluster that perceives beef to have little risk and the cluster that is most willing to accept the risks of eating beef. Regression analysis shows that risk attitudes have a larger impact on household-level beef purchasing decisions than do risk perceptions for all consumer clusters. This implies that it may be more effective to undertake policies that reduce the risks associated with eating beef, instead of enhancing risk communication to improve risk perceptions. Only for certain clusters with higher willingness to accept the risks of eating beef might enhancing risk communication increase beef consumption significantly. The different role of risk perceptions and risk attitudes in beef consumption needs to be recognized during the design of risk management policies.

  19. KILT (Kidney and IVC Abnormalities with Leg Thrombosis) Syndrome in a 41-Years-Old Man with Loin Pain and Fever.

    Science.gov (United States)

    Fung, James Kiujing; Yeung, Victor Hip Wo; Chu, Sau Kwan; Man, Chi Wan

    2017-05-01

    KILT syndrome is a rare condition composing the triad of kidney and inferior vena cava anomaly and extensive venous thrombosis. We present a case of newly diagnosed KILT syndrome in a 41-years-old gentleman presenting with loin pain and fever. Reviewing previous case reports, KILT syndrome is usually an incidental finding on imaging studies and there is a wide scope of initial clinical presentations. However, recent evidence suggests IVC anomaly may have caused subsequent renal hypoplasia. Identification of the underlying etiology may be helpful in planning early vascular intervention to treat the condition.

  20. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors

    DEFF Research Database (Denmark)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia

    2015-01-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied....... FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more...

  1. Comparative limnology of strip-mine lakes

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, J D

    1964-01-01

    Lakes were classified according to chemical properties. The concentration of the ferric iron oxides was responsible for a reddish-black turbidity which, in turn, played a major role in the thermal stratification of red strip-mine lakes. Owing to the lack of measurable turbidity and as a result of selective absorption of visible solar radiation, other strip-mine lakes appeared blue in color. The annual heat budget and the summer heat budget are essentially equivalent under saline conditions. Regardless of the physical and chemical conditions of the strip-mine lakes, heat income was a function of the circulating water mass. The progressive oxidation and precipitation of the iron oxides is the key to the classification of strip-mine lakes.

  2. Buffer Strips for Riparian Zone Management

    National Research Council Canada - National Science Library

    1991-01-01

    This study provides a review of technical literature concerning the width of riparian buffer strips needed to protect water quality and maintain other important values provided by riparian ecosystem...

  3. Deuteron stripping reactions using dirac phenomenology

    Science.gov (United States)

    Hawk, E. A.; McNeil, J. A.

    2001-04-01

    In this work deuteron stripping reactions are studied using the distorted wave born approximation employing dirac phenomenological potentials. In 1982 Shepard and Rost performed zero-range dirac phenomenological stripping calculations and found a dramatic reduction in the predicted cross sections when compared with similar nonrelativistic calculations. We extend the earlier work by including full finite range effects as well as the deuteron's internal D-state. Results will be compared with traditional nonrelativistic approaches and experimental data at low energy.

  4. Flexible strip supercapacitors for future energy storage

    OpenAIRE

    Zhang, R-R; Xu, Y-M; Harrison, D; Fyson, J; Qiu, F-L; Southee, D

    2015-01-01

    Flexible strip supercapacitors are developed and their electrochemical properties are characterized. Activated carbon is used as the electrode material and it is found to have a good porous structure which provides a large surface area for energy storage. Furthermore, this activated carbon performs well. The manufacturing processes for the supercapacitors are described in detail and the preparation process has good reproducibility. The strip supercapacitors are combined in series and parallel...

  5. The charge collection in silicon strip detectors

    International Nuclear Information System (INIS)

    Boehringer, T.; Hubbeling, L.; Weilhammer, P.; Kemmer, J.; Koetz, U.; Riebesell, M.; Belau, E.; Klanner, R.; Lutz, G.; Neugebauer, E.; Seebrunner, H.J.; Wylie, A.

    1983-02-01

    The charge collection in silicon detectors has been studied, by measuring the response to high-energy particles of a 20μm pitch strip detector as a function of applied voltage and magnetic field. The results are well described by a simple model. The model is used to predict the spatial resolution of silicon strip detectors and to propose a detector with optimized spatial resolution. (orig.)

  6. LYCORIS - A Large Area Strip Telescope

    CERN Document Server

    Krämer, U; Stanitzki, M; Wu, M

    2018-01-01

    The LYCORIS Large Area Silicon Strip Telescope for the DESY II Test Beam Facility is presented. The DESY II Test Beam Facility provides elec- tron and positron beams for beam tests of up to 6 GeV. A new telescope with a large 10 × 20 cm2 coverage area based on a 25 μm pitch strip sensor is to be installed within the PCMAG 1 T solenoid. The current state of the system is presented.

  7. Quantitative comparison of 3 enamel-stripping devices in vitro: how precisely can we strip teeth?

    Science.gov (United States)

    Johner, Alexander Marc; Pandis, Nikolaos; Dudic, Alexander; Kiliaridis, Stavros

    2013-04-01

    In this in-vitro study, we aimed to investigate the predictability of the expected amount of stripping using 3 common stripping devices on premolars. One hundred eighty extracted premolars were mounted and aligned in silicone. Tooth mobility was tested with Periotest (Medizintechnik Gulden, Modautal, Germany) (8.3 ± 2.8 units). The selected methods for interproximal enamel reduction were hand-pulled strips (Horico, Hapf Ringleb & Company, Berlin, Germany), oscillating segmental disks (O-drive-OD 30; KaVo Dental, Biberach, Germany), and motor-driven abrasive strips (Orthofile; SDC Switzerland, Lugano-Grancia, Switzerland). With each device, the operator intended to strip 0.1, 0.2, 0.3, or 0.4 mm on the mesial side of 15 teeth. The teeth were scanned before and after stripping with a 3-dimensional laser scanner. Superposition and measurement of stripped enamel on the most mesial point of the tooth were conducted with Viewbox software (dHal Software, Kifissia, Greece). The Wilcoxon signed rank test and the Kruskal-Wallis test were applied; statistical significance was set at alpha ≤ 0.05. Large variations between the intended and the actual amounts of stripped enamel, and between stripping procedures, were observed. Significant differences were found at 0.1 mm of intended stripping (P ≤ 0.05) for the hand-pulled method and at 0.4 mm of intended stripping (P ≤ 0.001 to P = 0.05) for all methods. For all scenarios of enamel reduction, the actual amount of stripping was less than the predetermined and expected amount of stripping. The Kruskal-Wallis analysis showed no significant differences between the 3 methods. There were variations in the stripped amounts of enamel, and the stripping technique did not appear to be a significant predictor of the actual amount of enamel reduction. In most cases, actual stripping was less than the intended amount of enamel reduction. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights

  8. Optimal Replacement and Management Policies for Beef Cows

    OpenAIRE

    W. Marshall Frasier; George H. Pfeiffer

    1994-01-01

    Beef cow replacement studies have not reflected the interaction between herd management and the culling decision. We demonstrate techniques for modeling optimal beef cow replacement intervals and discrete management policies by incorporating the dynamic effects of management on future productivity when biological response is uncertain. Markovian decision analysis is used to identify optimal beef cow management on a ranch typical of the Sandhills region of Nebraska. Issues of breeding season l...

  9. Beef cattle growing and backgrounding programs.

    Science.gov (United States)

    Peel, Derrell S

    2003-07-01

    The stocker industry is one of many diverse production and marketing activities that make up the United States beef industry. The stocker industry is probably the least understood industry sector and yet it plays a vital role in helping the industry exploit its competitive advantage of using forage resources and providing an economical means of adjusting the timing and volume of cattle and meat in a complex market environment.

  10. Irish Corned Beef: A Culinary History

    OpenAIRE

    Mac Con Iomaire, Máirtín; Gallagher, Pádraic Óg

    2011-01-01

    This article proposes that a better knowledge of culinary history enriches all culinary stakeholders. The article will discuss the origins and history of corned beef in Irish cuisine and culture. It outlines how cattle have been central to the ancient Irish way of life for centuries, but were cherished more for their milk than their meat. In the early modern period, with the decline in the power of the Gaelic lords, cattle became and economic commodity that was exported to England. The Cattle...

  11. Determinants of Beef and Pork Brand Equity

    OpenAIRE

    Parcell, Joseph L.; Schroeder, Ted C.

    2003-01-01

    A set of consumer-level characteristic demand models were estimated to determine the level of brand equity for pork and beef meat cuts. Results indicate that brand premiums and discounts vary by private, national, and store brands; and brand equity varies across meat cuts carrying the same brand name. Other results are that product size discounts are linear, meat items on sale are significantly discounted to non-sale items, specialty stores typically do not garner higher prices than supermark...

  12. Distinct physicochemical characteristics of different beef from ...

    African Journals Online (AJOL)

    Jane

    2011-04-11

    Apr 11, 2011 ... A total of 30 Qinchuan cattle were used to investigate the physicochemical characteristics of beef from three different parts of cattle carcass, ... fed the same diets at 4 to 5 kg/day (48.78% corn, 20.43% bran, 26% corn grit, 1.97% cotton cake, 2.3% vitamin and mineral supplement and 0.5% salt) for a fattening ...

  13. Biochemical, Oxidative, and Lipolytic Changes during Vacuum-Packed Storage of Dry-Cured Loin: Effect of Chestnuts Intake by Celta Pigs

    Directory of Open Access Journals (Sweden)

    María Gómez

    2018-01-01

    Full Text Available The effect of the inclusion of chestnuts in the finishing diet of Celta pig breed on the characteristics of dry-cured loin, a traditional Spanish dry-cured meat product, after the manufacturing process and the vacuum-packed storage was studied. In general, no significant differences between the diets (chestnut, mixed, and concentrate diet were obtained for physicochemical (moisture, intramuscular fat, and titratable acidity and lipolytic parameters. Lower pH and higher values for oxidation parameters (peroxide and TBA values were obtained in loins from pigs fed with chestnuts. However, no differences were found for fatty acids from the different lipid fractions when diets were compared, with the exception of some minor fatty acids. Free fatty acids represented over 2.7% of the fat in the final product. The distinction between diets was procured when a discriminant canonical analysis was performed for fatty acid contents. After vacuum-packed storage, only a slight evolution of the studied parameters was obtained.

  14. Physicochemical and microbiological changes during the refrigerated storage of lamb loins sous-vide cooked at different combinations of time and temperature.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Hernández, Alejandro; Ruiz, Jorge

    2015-10-01

    This study aimed to determine the influence of cooking temperature (either 60 ℃ or 80 ℃) and time (6 h or 24 h) on the physicochemical (weight loss, moisture content, instrumental color, instrumental texture, lipid and protein oxidation) and microbiological changes underwent by sous-vide cooked lamb loins during refrigerated storage for 30 days. There was a slight trend to decreasing weight losses in some of the cooking treatments, but only in samples cooked at 60 ℃ for 6 h it was paralleled with an increase in moisture content. The only noteworthy oxidative change was a marked decrease in conjugated dienes after two weeks of storage in samples cooked at 80 ℃ for 24 h. Neither instrumental texture nor color showed noticeable variations during the storage. Microbial population remained quite low during the whole refrigerated storage. Overall, most of the studied parameters showed only scarce changes throughout 30 days of refrigerated storage that most likely would not influence the quality of sous-vide cooked loin lambs. © The Author(s) 2014.

  15. Prediction of intramuscular fat content and shear force in Texel lamb loins using combinations of different X-ray computed tomography (CT) scanning techniques.

    Science.gov (United States)

    Clelland, N; Bunger, L; McLean, K A; Knott, S; Matthews, K R; Lambe, N R

    2018-06-01

    Computed tomography (CT) parameters, including spiral computed tomography scanning (SCTS) parameters, intramuscular fat (IMF) and mechanically measured shear force were derived from two previously published studies. Purebred Texel (n = 377) of both sexes, females (n = 206) and intact males (n = 171) were used to investigate the prediction of IMF and shear force in the loin. Two and three dimensional CT density information was available. Accuracies in the prediction of shear force and IMF ranged from R 2 0.02 to R 2 0.13 and R 2 0.51 to R 2 0.71 respectively, using combinations of SCTS and CT scan information. The prediction of mechanical shear force could not be achieved at an acceptable level of accuracy employing SCTS information. However, the prediction of IMF in the loin employing information from SCTS and additional information from standard CT scans was successful, providing evidence that the prediction of IMF and related meat eating quality (MEQ) traits for Texel lambs in vivo can be achieved. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Effect of different temperature-time combinations on physicochemical, microbiological, textural and structural features of sous-vide cooked lamb loins.

    Science.gov (United States)

    Roldán, Mar; Antequera, Teresa; Martín, Alberto; Mayoral, Ana Isabel; Ruiz, Jorge

    2013-03-01

    Lamb loins were subjected to sous-vide cooking at different combinations of temperature (60, 70, and 80 °C) and time (6, 12, and 24 h). Different physicochemical, histological and structural parameters were studied. Increasing cooking temperatures led to higher weight losses and lower moisture contents, whereas the effect of cooking time on these variables was limited. Samples cooked at 60 °C showed the highest lightness and redness, while increasing cooking temperature and cooking time produced higher yellowness values. Most textural variables in a texture profile analysis showed a marked interaction between cooking temperature and time. Samples cooked for 24h showed significantly lower values for most of the studied textural parameters for all the temperatures considered. Connective tissue granulation at 60 °C and gelation at 70 °C were observed in the SEM micrographs. The sous-vide cooking of lamb loins dramatically reduced microbial population even with the less intense heat treatment studied (60 °C-6 h). Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Comparison of gene expression and fatty acid profiles in concentrate and forage finished beef.

    Science.gov (United States)

    Buchanan, J W; Garmyn, A J; Hilton, G G; VanOverbeke, D L; Duan, Q; Beitz, D C; Mateescu, R G

    2013-01-01

    Fatty acid profiles and intramuscular expression of genes involved in fatty acid metabolism were characterized in concentrate- (CO) and forage- (FO) based finishing systems. Intramuscular samples from the adductor were taken at slaughter from 99 heifers finished on a CO diet and 58 heifers finished on a FO diet. Strip loins were obtained at fabrication to evaluate fatty acid profiles of LM muscle for all 157 heifers by using gas chromatography fatty acid methyl ester analysis. Composition was analyzed for differences by using the General Linear Model (GLM) procedure in SAS. Differences in fatty acid profile included a greater atherogenic index, greater percentage total MUFA, decreased omega-3 to omega-6 ratio, decreased percentage total PUFA, and decreased percentage omega-3 fatty acids in CO- compared with FO-finished heifers (P0.05). Upregulation was observed for PPARγ, fatty acid synthase (FASN), and fatty acid binding protein 4 (FABP4) in FO-finished compared with CO-finished heifers in both atherogenic index categories (P<0.05). Upregulation of diglyceride acyl transferase 2 (DGAT2) was observed in FO-finished heifers with a HAI (P<0.05). Expression of steroyl Co-A desaturase (SCD) was upregulated in CO-finished heifers with a LAI, and downregulated in FO-finished heifers with a HAI (P<0.05). Expression of adiponectin (ADIPOQ) was significantly downregulated in CO-finished heifers with a HAI compared with all other categories (P<0.05). The genes identified in this study which exhibit differential regulation in response to diet or in animals with extreme fatty acid profiles may provide genetic markers for selecting desirable fatty acid profiles in future selection programs.

  18. Pressure resistance of cold-shocked Escherichia coli O157:H7 in ground beef, beef gravy and peptone water.

    Science.gov (United States)

    Baccus-Taylor, G S H; Falloon, O C; Henry, N

    2015-06-01

    (i) To study the effects of cold shock on Escherichia coli O157:H7 cells. (ii) To determine if cold-shocked E. coli O157:H7 cells at stationary and exponential phases are more pressure-resistant than their non-cold-shocked counterparts. (iii) To investigate the baro-protective role of growth media (0·1% peptone water, beef gravy and ground beef). Quantitative estimates of lethality and sublethal injury were made using the differential plating method. There were no significant differences (P > 0·05) in the number of cells killed; cold-shocked or non-cold-shocked. Cells grown in ground beef (stationary and exponential phases) experienced lowest death compared with peptone water and beef gravy. Cold-shock treatment increased the sublethal injury to cells cultured in peptone water (stationary and exponential phases) and ground beef (exponential phase), but decreased the sublethal injury to cells in beef gravy (stationary phase). Cold shock did not confer greater resistance to stationary or exponential phase cells pressurized in peptone water, beef gravy or ground beef. Ground beef had the greatest baro-protective effect. Real food systems should be used in establishing food safety parameters for high-pressure treatments; micro-organisms are less resistant in model food systems, the use of which may underestimate the organisms' resistance. © 2015 The Society for Applied Microbiology.

  19. Environmental Awareness on Beef Cattle Technology

    Directory of Open Access Journals (Sweden)

    Abdullah M Bamualim

    2008-09-01

    Full Text Available The acceleration program to meet beef self sufficient in 2010 is expected to increase animal protein consumption of Indonesian people in order to be equal with other countries as well as to improve the livestock farmer’s income. The main objective of the program is to increase cattle population. Since the availability of forage and grassland is limited, beef cattle development is driven to the crop and plantation integration approach by using their by-product as cattle feed. Crop and plantation by-products, generally are considered to be fiber source with high lignocellulose’s and low nutritive value. Feeding high fiber would increase methane gas production, and faeces and grass cultivation also contributed on greenhouse emission. Methane is one of the main greenhouse gases contributed by agriculture sector; increasing beef cattle population using high fiber feed is predicted to increase methane production. Good management is expected to improve productivity and to reduce methane production on livestock. Some efforts could be done such as good feeding management and nutrition manipulation, environment friendly cattle waste management, improving management on roughage cultivation, and improving management on cattle production.

  20. Toujours plus loin

    CERN Multimedia

    2004-01-01

    La Suisse Assurances has the pleasure to have CERN rank amongst its clients. The largest particle physics laboratory in the world celebrates its 50th anniversary this year. For this occasion, La Suisse had the opportunity to learn more about the accelerator and detectors (2 pages)

  1. Current situation and future prospects for the Australian beef industry.

    Science.gov (United States)

    Greenwood, Paul Leo; Ferguson, Drewe M

    2018-04-12

    Beef production extends over almost half of Australia, with about 47,000 cattle producers that contribute about 20% ($A12.7 billion GVP) of the total value of farm production in Australia. Australia is one of the world's most efficient producers of cattle and was the world's third largest beef exporter in 2016. The Australian beef industry had 25 million head of cattle in 2016-17, with a national beef breeding herd of 11.5 million head. Australian beef production includes pasture based cow-calf systems, a backgrounding or grow-out period on pasture, and feedlot or pasture finishing. Feedlot finishing has assumed more importance in recent years to assure the eating quality of beef entering the relatively small Australian domestic market, and to enhance the supply of higher value beef for export markets. Maintenance of Australia's preferred status as a quality assured supplier of high value beef produced under environmentally sustainable systems from 'disease-free' cattle is of highest importance. Stringent livestock and meat quality regulations and quality assurance systems, and productivity growth and efficiency across the supply chain to ensure price competiveness, are crucial for continued export market growth in the face of increasing competition. Major industry issues, that also represent research, development and adoption priorities and opportunities for the Australian beef industry have been captured within exhaustive strategic planning processes by the red meat and beef industries. At the broadest level, these issues include consumer and industry support, market growth and diversification, supply chain efficiency, productivity and profitability, environmental sustainability, and animal health and welfare. This review provides an overview of the Australian beef industry including current market trends and future prospects, and major issues and opportunities for the continued growth, development and profitability of the industry.

  2. Development of floating strip micromegas detectors

    Energy Technology Data Exchange (ETDEWEB)

    Bortfeldt, Jonathan

    2014-04-28

    Micromegas are high-rate capable, high-resolution micro-pattern gaseous detectors. Square meter sized resistive strip Micromegas are foreseen as replacement of the currently used precision tracking detectors in the Small Wheel, which is part of the forward region of the ATLAS muon spectrometer. The replacement is necessary to ensure tracking and triggering performance of the muon spectrometer after the luminosity increase of the Large Hadron Collider beyond its design value of 10{sup 34} cm{sup -2}s{sup -1} around 2020. In this thesis a novel discharge tolerant floating strip Micromegas detector is presented and described. By individually powering copper anode strips, the effects of a discharge are confined to a small region of the detector. This reduces the impact of discharges on the efficiency by three orders of magnitude, compared to a standard Micromegas. The physics of the detector is studied and discussed in detail. Several detectors are developed: A 6.4 x 6.4 cm{sup 2} floating strip Micromegas with exchangeable SMD capacitors and resistors allows for an optimization of the floating strip principle. The discharge behavior is investigated on this device in depth. The microscopic structure of discharges is quantitatively explained by a detailed detector simulation. A 48 x 50 cm{sup 2} floating strip Micromegas is studied in high energy pion beams. Its homogeneity with respect to pulse height, efficiency and spatial resolution is investigated. The good performance in high-rate background environments is demonstrated in cosmic muon tracking measurements with a 6.4 x 6.4 cm{sup 2} floating strip Micromegas under lateral irradiation with 550 kHz 20 MeV proton beams. A floating strip Micromegas doublet with low material budget is developed for ion tracking without limitations from multiple scattering in imaging applications during medical ion therapy. Highly efficient tracking of 20 MeV protons at particle rates of 550 kHz is possible. The reconstruction of the

  3. Development of floating strip micromegas detectors

    International Nuclear Information System (INIS)

    Bortfeldt, Jonathan

    2014-01-01

    Micromegas are high-rate capable, high-resolution micro-pattern gaseous detectors. Square meter sized resistive strip Micromegas are foreseen as replacement of the currently used precision tracking detectors in the Small Wheel, which is part of the forward region of the ATLAS muon spectrometer. The replacement is necessary to ensure tracking and triggering performance of the muon spectrometer after the luminosity increase of the Large Hadron Collider beyond its design value of 10 34 cm -2 s -1 around 2020. In this thesis a novel discharge tolerant floating strip Micromegas detector is presented and described. By individually powering copper anode strips, the effects of a discharge are confined to a small region of the detector. This reduces the impact of discharges on the efficiency by three orders of magnitude, compared to a standard Micromegas. The physics of the detector is studied and discussed in detail. Several detectors are developed: A 6.4 x 6.4 cm 2 floating strip Micromegas with exchangeable SMD capacitors and resistors allows for an optimization of the floating strip principle. The discharge behavior is investigated on this device in depth. The microscopic structure of discharges is quantitatively explained by a detailed detector simulation. A 48 x 50 cm 2 floating strip Micromegas is studied in high energy pion beams. Its homogeneity with respect to pulse height, efficiency and spatial resolution is investigated. The good performance in high-rate background environments is demonstrated in cosmic muon tracking measurements with a 6.4 x 6.4 cm 2 floating strip Micromegas under lateral irradiation with 550 kHz 20 MeV proton beams. A floating strip Micromegas doublet with low material budget is developed for ion tracking without limitations from multiple scattering in imaging applications during medical ion therapy. Highly efficient tracking of 20 MeV protons at particle rates of 550 kHz is possible. The reconstruction of the track inclination in a single

  4. Fabrication and variation of the cut-out yield of beef carcasses in Venezuela: anatomical description of the process and equivalency of cut nomenclature to North American counterparts

    Directory of Open Access Journals (Sweden)

    Angela Montero

    2014-06-01

    Full Text Available The typical processes of beef carcass fabrication in Venezuela are anatomically described and the equivalence in cut nomenclature with that of México and United States is provided. Additionally, 910 carcasses were fabricated to assess yield (kg and percentages of carcass weight in products (subprimals, subprimal groups of distinct commercial value (High, Medium, Low and by-products (bone, fat trimmings using mean values ± standard deviation (DE, coefficient of variation (CV and range of values. Once the carcass is ribbed at the 5th intercostal space, subprimals are obtained by deboning and dissecting the muscle masses (saw cutting is seldom used. In terms of yield, the top three (out of 18 individual subprimals were: Solomo Abierto (boneless Chuck Roll, 39.1± 10.88kg; 14.3± 2.84%, Costilla (bone-in Plate, 22kg± 4.15; 8.12± 0.88% and Solomo de Cuerito (boneless Rib and Loin, 21.6± 3.10kg; 8.0± 0.59%. Cutability values for High-Valued and Medium-Valued subprimal groups were 81.5± 10.3kg (30.2± 1.43% and 67.3± 14.57kg (24.8± 3.22%, respectively; the latter showing the highest CV (13.0%. Fat trimmings were the most variable by-product (10.1± 2.84%, CV = 28.0%. This report serves as a reference for future studies and could facilitate the commercial language for trading beef cuts between the countries involved

  5. Superconducting nano-strip particle detectors

    International Nuclear Information System (INIS)

    Cristiano, R; Ejrnaes, M; Casaburi, A; Zen, N; Ohkubo, M

    2015-01-01

    We review progress in the development and applications of superconducting nano-strip particle detectors. Particle detectors based on superconducting nano-strips stem from the parent devices developed for single photon detection (SSPD) and share with them ultra-fast response times (sub-nanosecond) and the ability to operate at a relatively high temperature (2–5 K) compared with other cryogenic detectors. SSPDs have been used in the detection of electrons, neutral and charged ions, and biological macromolecules; nevertheless, the development of superconducting nano-strip particle detectors has mainly been driven by their use in time-of-flight mass spectrometers (TOF-MSs) where the goal of 100% efficiency at large mass values can be achieved. Special emphasis will be given to this case, reporting on the great progress which has been achieved and which permits us to overcome the limitations of existing mass spectrometers represented by low detection efficiency at large masses and charge/mass ambiguity. Furthermore, such progress could represent a breakthrough in the field. In this review article we will introduce the device concept and detection principle, stressing the peculiarities of the nano-strip particle detector as well as its similarities with photon detectors. The development of parallel strip configuration is introduced and extensively discussed, since it has contributed to the significant progress of TOF-MS applications. (paper)

  6. Factors affecting hydrocarbon removal by air stripping

    International Nuclear Information System (INIS)

    McFarland, W.E.

    1992-01-01

    This paper includes an overview of the theory of air stripping design considerations and the factors affecting stripper performance. Effects of temperature, contaminant characteristics, stripping tower geometry and air/water ratios on removal performance are discussed. The discussion includes treatment of groundwater contaminated with petroleum hydrocarbons and chlorinated solvents such as TCE and PCE. Control of VOC emissions from air strippers has become a major concern in recent years, due to more stringent restrictions on air quality in many areas. This paper includes an overview of available technology to control air emissions (including activated carbon adsorption, catalytic oxidation and steam stripping) and the effects of air emission control on overall efficiency of the treatment process. The paper includes an overview of the relative performance of various packing materials for air strippers and explains the relative advantages and disadvantages of comparative packing materials. Field conditions affecting selection of packing materials are also discussed. Practical guidelines for the design of air stripping systems are presented, as well as actual case studies of full-scale air stripping projects

  7. Properties isotropy of magnesium alloy strip workpieces

    Directory of Open Access Journals (Sweden)

    Р. Кавалла

    2016-12-01

    Full Text Available The paper discusses the issue of obtaining high quality cast workpieces of magnesium alloys produced by strip roll-casting. Producing strips of magnesium alloys by combining the processes of casting and rolling when liquid melt is fed continuously to fast rolls is quite promising and economic. In the process of sheet stamping considerable losses of metal occur on festoons formed due to anisotropy of properties of foil workpiece, as defined by the macro- and microstructure and modes of rolling and annealing. The principal causes of anisotropic mechanical properties of metal strips produced by the combined casting and rolling technique are the character of distribution of intermetallic compounds in the strip, orientation of phases of metal defects and the residual tensions. One of the tasks in increasing the output of fit products during stamping operations consists in minimizing the amount of defects. To lower the level of anisotropy in mechanical properties various ways of treating the melt during casting are suggested. Designing the technology of producing strips of magnesium alloys opens a possibility of using them in automobile industry to manufacture light-weight body elements instead of those made of steel.

  8. Area specific stripping factors for AGS. A method for extracting stripping factors from survey data

    Energy Technology Data Exchange (ETDEWEB)

    Aage, H.K.; Korsbech, U. [Technical Univ. of Denmark (Denmark)

    2006-04-15

    In order to use Airborne Gamma-ray Spectrometry (AGS) for contamination mapping, for source search etc. one must to be able to eliminate the contribution to the spectra from natural radioactivity. This in general is done by a stripping technique. The parameters for performing a stripping have until recently been measured by recording gamma spectra at special calibration sites (pads). This may be cumbersome and the parameters may not be correct when used at low gamma energies for environmental spectra. During 2000-2001 DTU tested with success a new technique for Carborne Gamma-ray Spectrometry (CGS) where the spectra from the surveyed area (or from a similar area) were used for calculating the stripping parameters. It was possible to calculate usable stripping ratios for a number of low energy windows - and weak source signals not detectable by other means were discovered with the ASS technique. In this report it is shown that the ASS technique also works for AGS data, and it has been used for recent Danish AGS tests with point sources. (Check of calibration of AGS parameters.) By using the ASS technique with the Boden data (Barents Rescue) an exercise source was detected that has not been detected by any of the teams during the exercise. The ASS technique therefore seems to be better for search for radiation anomalies than any other method known presently. The experiences also tell that although the stripping can be performed correctly at any altitude there is a variation of the stripping parameters with altitude that has not yet been quite understood. However, even with the oddly variations the stripping worked as expected. It was also observed that one might calculate a single common set of usable stripping factors for all altitudes from the entire data set i.e. some average a, b and c values. When those stripping factors were used the stripping technique still worked well. (au)

  9. Nanopurification of semen improves AI pregnancy rates in beef cattle

    Science.gov (United States)

    Reproductive efficiency is several times more important than any other factor affecting economic efficiency in beef production. Multiple studies have been conducted to improve fertility of beef cows, but few studies have been conducted to improve fertility in sires. Also, with current improvements...

  10. Reproduction performance of beef cattle mated naturally following ...

    African Journals Online (AJOL)

    mgrobler

    2014-08-24

    Aug 24, 2014 ... The estimated calving percentage of beef cattle is 62% in the commercial sector of South ... Cows that calve early also have a better chance of conceiving in the next ..... reproductive tract scoring in beef heifers in South Africa.

  11. Influence of mitochondrial efficiency on beef lean color stability

    Science.gov (United States)

    Loss of electrons in the electron transport chain has been implicated as a source of variation in feed efficiency of meat producing animals. The present study was conducted to evaluate the effects of electron loss during electron transport on beef lean color stability. Beef carcasses (n = 91) were...

  12. Mitigating greenhouse gas emissions from beef cattle housing

    Science.gov (United States)

    Beef cattle are potential sources of greenhouse gases (GHG). These emissions include methane produced by fermentation within the gut (enteric), and methane and nitrous oxide emissions from manure. Life Cycle Analysis of North American (NA) beef cattle production systems consistently indicate that...

  13. Comparative analysis of the demand for beef and mutton among ...

    African Journals Online (AJOL)

    Beef and mutton are meat types derived from cattle and sheep respectively. They are popular meat sources for households in Enugu metropolis Nigeria, although in ... that was significant in explaining the household expenditure on mutton. The expenditure elasticity for beef was 0.885, while that of mutton was 0.00073.

  14. Antagonism in the carbon footprint between beef and dairy ...

    African Journals Online (AJOL)

    The higher increase in production (milk) of intensive dairy cows, compared to the increase in production (calf weight) of intensive beef cows, explains the antagonism in the carbon footprint between different beef and dairy production systems. Unfortunately, carbon sequestration estimates have been neglected and thus the ...

  15. Analysis of 'Coma strip' galaxy redshift catalog

    International Nuclear Information System (INIS)

    Klypin, A.A.; Karachentsev, I.D.; Lebedev, V.S.

    1990-01-01

    We present results of the analysis of a galaxy redshift catalog made at the 6-m telescope by Karachentsev and Kopylov (1990. Mon. Not. R. astr. Soc., 243, 390). The catalog covers a long narrow strip on the sky (10 arcmin by 63 0 ) and lists 283 galaxies up to limiting blue magnitude m B = 17.6. The strip goes through the core of Coma cluster and this is called the 'Coma strip' catalog. The catalog is almost two times deeper than the CfA redshift survey and creates the possibility of studying the galaxy distribution on scales of 100-250 Mpc. Due to the small number of galaxies in the catalog, we were able to estimate only very general and stable parameters of the distribution. (author)

  16. Impact of DDGS-supplemented diet with or without vitamin E and selenium supplementation on the fatty acid profile of beef

    Directory of Open Access Journals (Sweden)

    Holló I.

    2016-12-01

    Full Text Available The impact of supplementation of vitamin E or organic selenium in DDGS (dried distillers grains with solubles diet on fatty acid composition in two meat cuts of finishing Holstein bulls was investigated. Twenty-four Holstein bulls were allotted to treatments in three groups of eight bulls per group for a 100-day trial. The treatments were adequate Se and vitamin E supplementation in control group (C, supranutritional vitamin E supplementation in vitamin Group E (E, supranutritional Se supplementation in selenium group (Se. At similar age, slaughtering Group C had higher slaughter/carcass weight and EUROP fat score than Se counterparts. The killing out percentage and proximate composition of muscles differed among treatments. Inclusion of the vitamin E or Se supplement led to expected increases (P < 0.05 in vitamin E and Se contents of the brisket and loin. Higher vitamin E concentration caused significant lower SFA and greater PUFA. Higher Se level influenced significant SFA in brisket and PUFA in both muscles. Vitamin E or Se dietary treatments in DDGS-supplemented diet resulted in beef meat cuts considerably beneficial PUFA/SFA but markedly higher n-6/n-3 PUFA ratio and even higher health index in both meat samples opposite to Group C.

  17. Environmentally Optimal, Nutritionally Aware Beef Replacement Plant-Based Diets.

    Science.gov (United States)

    Eshel, Gidon; Shepon, Alon; Noor, Elad; Milo, Ron

    2016-08-02

    Livestock farming incurs large and varied environmental burdens, dominated by beef. Replacing beef with resource efficient alternatives is thus potentially beneficial, but may conflict with nutritional considerations. Here we show that protein-equivalent plant based alternatives to the beef portion of the mean American diet are readily devisible, and offer mostly improved nutritional profile considering the full lipid profile, key vitamins, minerals, and micronutrients. We then show that replacement diets require on average only 10% of land, 4% of greenhouse gas (GHG) emissions, and 6% of reactive nitrogen (Nr) compared to what the replaced beef diet requires. Applied to 320 million Americans, the beef-to-plant shift can save 91 million cropland acres (and 770 million rangeland acres), 278 million metric ton CO2e, and 3.7 million metric ton Nr annually. These nationwide savings are 27%, 4%, and 32% of the respective national environmental burdens.

  18. Cow biological type affects ground beef colour stability.

    Science.gov (United States)

    Raines, Christopher R; Hunt, Melvin C; Unruh, John A

    2009-12-01

    To determine the effects of cow biological type on colour stability of ground beef, M. semimembranosus from beef-type (BSM) and dairy-type (DSM) cows was obtained 5d postmortem. Three blends (100% BSM, 50% BSM+50% DSM, 100% DSM) were adjusted to 90% and 80% lean points using either young beef trim (YBT) or beef cow trim (BCT), then packaged in high oxygen (High-O(2); 80% O(2)) modified atmosphere (MAP). The BSM+YBT patties had the brightest colour initially, but discoloured rapidly. Although DSM+BCT patties had the darkest colour initially, they discoloured least during display. Metmyoglobin reducing ability of ground DSM was up to fivefold greater than ground BSM, and TBARS values of BSM was twofold greater than DSM by the end of display (4d). Though initially darker than beef cow lean, dairy cow lean has a longer display colour life and may be advantageous to retailers using High-O(2) MAP.

  19. PREFERENCES AND BUYING BEHAVIOUR OF BEEF CONSUMERS IN TUSCANY

    Directory of Open Access Journals (Sweden)

    Marija RADMAN

    2005-07-01

    Full Text Available Tuscany, probably the most famous Italian region, is known because of many typical food specialities. One of them is the “fi orentina” - a thick, fi rst quality beef, called after the name of the city of Florence. However, recent trends in consumers’ behaviour and the BSE crisis have affected the attitude of consumers toward such products. In this study are presented the results of a mail survey about beef consumption and preferences that was conducted in Tuscany in May 2002. The survey showed that, despite recent food scares and new consumption behaviour, Tuscany consumers still like and prefer beef that has guarantees of quality. Therefore, there are good market opportunities for the Italian and foreign beef producers in Tuscany if they will provide consumers with not only good quality beef, but also more information about the meat.

  20. Mukhabarah as Sharia Financing Model in Beef Cattle Farm Entrepise

    Science.gov (United States)

    Asnawi, A.; Amrawaty, A. A.; Nirwana

    2018-02-01

    Financing constraints on beef cattle farm nowadays have received attention by the government through distributed various assistance programs and program loans through implementing banks. The existing financing schemes are all still conventional yet sharia-based. The purpose of this research is to formulate financing pattern for sharia beef cattle farm. A qualitative and descriptive approach is used to formulate the pattern by considering the profit-sharing practices of the beef cattle farmers. The results of this study have formulated a financing pattern that integrates government, implementing banks, beef cattle farmers group and cooperative as well as breeders as its members. This pattern of financing is very accommodating of local culture that develops in rural communities. It is expected to be an input, especially in formulating a business financing policy Sharia-based beef cattle breeding.

  1. Use of high irradiation doses for preservation of canned beef

    International Nuclear Information System (INIS)

    Hammad, A.A.I; Salem, F.A.; El-Sahy, K.M.; Rady, A.; Badr, H.H.

    1997-01-01

    The effect of high irradiation doses (11.25,22.5 and 45 KGy) on the bacteriology, organoleptic quality and shelf - life extension of beef meat that are hermetically sealed in metal cans was investigated in comparison with commercial heat sterilization. The unirradiated cans of pre cooked (enzyme inactivated) unirradiated beef were swollen after only one month of storage at ambient temperature (20-30 degree). Application of 11.25 and 22.5 kGy to vacuum packed and enzyme inactivated beef was not enough for sterilization and only delayed swelling of beef cans. Application of 45 KGy irradiation dose prevented swelling of beef vans up to 12 months at ambient temperature and provided meat product, similar to the commercial heat sterilized one, organoleptically acceptable and microbiologically safe. Running title: Radiation sterilization of meat

  2. 77 FR 12752 - Beef Promotion and Research; Amendment to the Order

    Science.gov (United States)

    2012-03-02

    ... possessing the requisite experience, skills and information related to the marketing of beef and beef..., skills and information related to the marketing of beef and beef products, as is intended under the Act... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1260 [Doc. No. AMS-LS-11-0086...

  3. Evaluation of beef trim sampling methods for detection of Shiga toxin-producing Escherichia coli (STEC)

    Science.gov (United States)

    Presence of Shiga toxin-producing Escherichia coli (STEC) is a major concern in ground beef. Several methods for sampling beef trim prior to grinding are currently used in the beef industry. The purpose of this study was to determine the efficacy of the sampling methods for detecting STEC in beef ...

  4. Test strip and method for its use

    International Nuclear Information System (INIS)

    1981-01-01

    A test strip device is described which is useful in performing binding assays involving antigens, antibodies, hormones, vitamins, metabolites or pharmacological agents. The device is capable of application to analytical methods in which a set of sequential test reactions is involved and in which a minute sample size may be used. This test strip is particularly useful in radioimmunoassays. The use of the device is illustrated in radioimmunoassays for 1) thyroxine in serum, 2) the triiodothyronine binding capacity of serum and 3) folic acid and its analogues in serum. (U.K.)

  5. Stage- vs. Channel-strip Metaphor

    DEFF Research Database (Denmark)

    Gelineck, Steven; Korsgaard, Dannie Michael; Büchert, Morten

    2015-01-01

    This study compares the stage metaphor and the channel strip metaphor in terms of performance. Traditionally, music mixing consoles employ a channels strip control metaphor for adjusting parameters such as volume and panning of each track. An alternative control metaphor, the so-called stage meta...... is surprisingly similar and thus we are not able to detect any significant difference in performance between the two interfaces. Qualitative data however, suggests that the stage metaphor is largely favoured for its intuitive interaction - confirming earlier studies....

  6. slice of LEP beamtube with getter strip

    CERN Multimedia

    1989-01-01

    A section of the LEP beam pipe. This is the chamber in which LEP's counter-rotating electron and positron beams travel. It is made of lead-clad aluminium. The beams circulate in the oval cross-section part of the chamber. In the rectangular cross-section part, LEP's innovative getter-strip vacuum pump is installed. After heating to purify the surface of the getter, the strip acts like molecular sticky tape, trapping any stray molecules left behind after the accelerator's traditional vacuum pumps have done their job.

  7. Comparative characteristics of polystyrene scintillation strips

    International Nuclear Information System (INIS)

    Gapienko, V.A.; Denisov, A.G.; Mel'nikov, E.A.

    1992-01-01

    Results are provided for a study of the main characteristics of polystyrene scintillation strips with a cross-section of 200 x 10 mm with two different scintillation-additive compositions: 1.5% p-terphenyl + 0.01% POPOP and 1.5% p-terphenyl + 0.01% DBP. The mean light-attenuation lengths are 180 cm and 260 cm, respectively, for strips with POPOP and DBP. The emittances of the polystyrene scintillators with DBP and POPOP additives have a ratio of 0.8:1.0 as recorded by an FEU-110 photomultiplier. 2 refs., 1 fig., 2 tabs

  8. Wide Strip Casting Technology of Magnesium Alloys

    Science.gov (United States)

    Park, W.-J.; Kim, J. J.; Kim, I. J.; Choo, D.

    Extensive investigations relating to the production of high performance and low cost magnesium sheet by strip casting have been performed for the application to automotive parts and electronic devices. Research on magnesium sheet production technology started in 2004 by Research Institute of Industrial Science and Technology (RIST) with support of Pohang Iron and Steel Company (POSCO). POSCO has completed the world's first plant to manufacture magnesium coil. Another big project in order to develop wide strip casting technology for the automotive applications of magnesium sheets was started in succession.

  9. Asset Stripping in a Mature Market Economy

    DEFF Research Database (Denmark)

    Klarskov Jeppesen, Kim; Møller, Ulrik Gorm

    2011-01-01

    Purpose – The purpose of this paper is to document a Danish fraud scheme, in which a large number of limited companies were stripped of their assets leaving them with nothing but tax debt, eventually causing the Danish Tax and Customs Administration to lose large sums. Furthermore, the purpose...... indicates that asset stripping may take place in mature market economies to the extent that perpetrators are able to circumvent the corporate governance system by giving lawyers, public accountants and banks incentives to act less critically towards dubious business transactions. Research limitations...

  10. SUPPLY CHAIN MANAGEMENT OF IMPORTED FROZEN BEEF: AN ALTERNATIVE TO INTEGRATE WITH LOCAL BEEF SUPPLY CHAIN MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Sani R.

    2017-12-01

    Full Text Available The purpose of this study is to describe the supply chain management of imported frozen beef from Australia to Indonesia; to analyze where the strengths, weaknesses, opportunities, and threats for the frozen meat distributor, and what strategy should be chosen; and to analyze alternatives of cooperation between imported frozen beef distribution with local beef distribution chain. The research approach is qualitative, and the research strategy is a case study. This research was conducted in Jakarta, data collecting technique by interview method and literature study. Data analysis techniques use supply chain management (SCM and strengths, weaknesses, opportunities, and threats (SWOT analysis. The results show that the distribution chain management of imported frozen beef needs to tripartite cooperation with government and local beef distributors to conduct joint marketing of imported frozen beef and cooler procurement to the point of retailers in traditional markets; expanding the market share of imported frozen beef to industrial segments (hotels, restaurant, catering company; and meat processing factories; and cooperate with imported beef suppliers to overcome the problem of taste flavor and lack of weight of imported frozen meat, and clarify halal certification.

  11. Managing the reproductive performance of beef cows.

    Science.gov (United States)

    Diskin, M G; Kenny, D A

    2016-07-01

    A reproductively efficient beef cow herd will be fundamental to meeting the protein and specifically, red meat demand of an ever increasing global population. However, attaining a high level of reproductive efficiency is underpinned by producers being cognizant of and achieving many key targets throughout the production cycle and requires considerable technical competency. The lifetime productivity of the beef-bred female commences from the onset of puberty and will be dictated by subsequent critical events including age at first calving, duration of the postpartum interval after successive calvings, conception and pregnancy rate, and ultimately manifested as length of intercalving intervals. In calved heifers and mature cows, the onset of ovarian activity, postpartum is a key event dictating the calving interval. Again, this will be the product mainly of prepartum nutrition, manifested through body condition score and the strength of the maternal bond between cow and calf, though there is increasing evidence of a modest genetic influence on this trait. After the initiation of postpartum ovarian cyclicity, conception and subsequent pregnancy rate is generally a function of bull fertility in natural service herds and heat detection and timing of insemination in herds bred through AI. Cows and heifers should be maintained on a steady plane of nutrition during the breeding season, but the contribution of significant excesses or deficiencies of nutrients including protein and trace elements is likely to be minor where adequate pasture is available. Although increased efforts are being made internationally to genetically identify and select for more reproductively efficient beef cows, this is a more long-term strategy and will not replace the need for a high level of technical efficiency and management practice at farm level. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Maxillary osteosarcoma in a beef suckler cow

    Directory of Open Access Journals (Sweden)

    Prins Diether G J

    2012-07-01

    Full Text Available Abstract A ten-year-old beef suckler cow was referred to the Scottish Centre for Production Animal Health & Food Safety of the University of Glasgow, because of facial swelling in the region of the right maxilla. The facial swelling was first noticed three months earlier and was caused by a slow growing oral mass which contained displaced, loosely embedded teeth. The radiographic, laboratory and clinicopathological findings are described. Necropsy, gross pathology and histological findings confirmed the mass as a maxillary osteosarcoma.

  13. Linear sweep anodic stripping voltammetry: Determination of ...

    Indian Academy of Sciences (India)

    The aim of this work is to determine Cr(VI) in water resources by anodic stripping voltammetry using SPE-. AuNPs modified electrode .... surface area about 4 fold). 3.2 Optimization of Parameters ..... in water samples. The above system offers a.

  14. Physical distribution of oak strip flooring 1969

    Science.gov (United States)

    William C. Miller; William C. Miller

    1971-01-01

    As an aid to the marketing of oak strip flooring, a study was made of the distribution process for this product, from manufacture to consumer-where the flooring came from, where it went, how much was shipped, and who handled it.

  15. The Advantages of Lateral Tarsal Strip Procedure

    African Journals Online (AJOL)

    Generally in surgery, an ideal operation should be effective, cause minimal discomfort and morbidity, give an aesthetic result, and have a lasting effect.[4]. Lateral strip procedure (LSP) has those characteristics and it does restore normal lid function and give a rapid rehabilitation with few complications and excellent.

  16. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1980-01-01

    An improved and novel grid spacer for maintaining the fuel rods of a nuclear reactor fuel assembly in substantially parallel array is described. The invention provides for spring strips to maintain the fuel elements in their desired orientation which have more positive alignment than previous types while allowing greater flexibility to counterbalance the effects of differential thermal expansion. (UK)

  17. Nanoscale Test Strips for Multiplexed Blood Analysis

    Science.gov (United States)

    Chan, Eugene

    2015-01-01

    A critical component of the DNA Medicine Institute's Reusable Handheld Electrolyte and Lab Technology for Humans (rHEALTH) sensor are nanoscale test strips, or nanostrips, that enable multiplexed blood analysis. Nanostrips are conceptually similar to the standard urinalysis test strip, but the strips are shrunk down a billionfold to the microscale. Each nanostrip can have several sensor pads that fluoresce in response to different targets in a sample. The strips carry identification tags that permit differentiation of a specific panel from hundreds of other nanostrip panels during a single measurement session. In Phase I of the project, the company fabricated, tested, and demonstrated functional parathyroid hormone and vitamin D nanostrips for bone metabolism, and thrombin aptamer and immunoglobulin G antibody nanostrips. In Phase II, numerous nanostrips were developed to address key space flight-based medical needs: assessment of bone metabolism, immune response, cardiac status, liver metabolism, and lipid profiles. This unique approach holds genuine promise for space-based portable biodiagnostics and for point-of-care (POC) health monitoring and diagnostics here on Earth.

  18. KRITIK SOSIAL DALAM KOMIK STRIP PAK BEI

    Directory of Open Access Journals (Sweden)

    Yudhi Novriansyah

    2016-08-01

    Full Text Available This research aimed to do interpret the marking which flange social criticism and know laboring ideology in story of Comic Strip Pak Bei. Research based on theory of structural semiotic according to Ferdinand De Saussure. Using analysis of Syntagmatic as first level of meaning to the text network and also picture, and analysis of Paradigmatic as second level of meaning or implicit meaning (connota-tion, myth, ideology Analysis done to six Comic choice edition of Strip Pak Bei period of November 2004 - Februari 2005 which tend to flange social criticism. At band of syntagmatic, result of research indicate that story theme lifted from social problems that happened in major society. The fact clear progressively when connected by Intertextual with information and texts which have preexisted. At band of Paradigmatic, social criticism tend to emerge dimly, is not transparent. Because of Comic Strip Pak Bei expand in the middle of Java cultural domination that developing myth of criticize as action menacing compatibility and orderliness of society. Story of Comic Strip Pak Bei also confirm dominant ideology in Java society culture, namely ideology of Patriarkhi and Feudalism which still go into effect until now. This prove ideology idea according to Louis Althusser which not again opposition between class, but have been owned and practiced by all social class.

  19. Polymer Inclusion Membranes with Strip Dispersion

    Directory of Open Access Journals (Sweden)

    Yueh-Hsien Li

    2017-06-01

    Full Text Available The present work investigated the permeation of indium ions through a polymer inclusion membrane (PIM, prepared with cellulose triacetate (CTA as the base polymer, tris(2-butoxyethyl phosphate (TBEP as the plasticizer and di-(2-ethylhexylphosphoric acid (D2EHPA as the extractant. With 5 M HCl aqueous solution as the strip solution, we observed an initial indium permeability of 2.4 × 10−4 m/min. However, the permeability decreases with time, dropping to about 3.4 × 10−5 m/min after 200 min of operation. Evidence was obtained showing that hydrolysis of CTA occurred, causing a dramatic decrease in the feed pH (protons transported from strip to feed solutions and a loss of extractant and plasticizer from the membrane, and then leading to the loss of indium permeability. To alleviate the problem of hydrolysis, we proposed an operation scheme called polymer inclusion membranes with strip dispersion: dispersing the strip solution in extractant-containing oil and then bringing the dispersion to contact with the polymer membrane. Since the strong acid was dispersed in oil, the membrane did not directly contact the strong acid at all times, and membrane hydrolysis was thus alleviated and the loss of indium permeability was effectively prevented. With the proposed scheme, a stable indium permeability of 2.5 × 10−4 m/min was obtained during the whole time period of the permeation experiment.

  20. Comic Strips to Accompany Science Museum Exhibits

    Science.gov (United States)

    Chung, Beom Sun; Park, Eun-mi; Kim, Sang-Hee; Cho, Sook-kyoung; Chung, Min Suk

    2016-01-01

    Science museums make the effort to create exhibits with amusing explanations. However, existing explanation signs with lengthy text are not appealing, and as such, visitors do not pay attention to them. In contrast, conspicuous comic strips composed of simple drawings and humors can attract science museum visitors. This study attempted to reveal…

  1. Effects of modified atmosphere, associated with masterpack transport packaging, and refrigerated storage time on the quality characteristics of pork loin cuts

    Directory of Open Access Journals (Sweden)

    Alessandra F. Rosa

    2013-10-01

    Full Text Available The objective of this research was to study the effects of modified atmosphere, associated with masterpack transport packaging, and refrigerated storage time on the quality characteristics of pork loin cuts. Cuts of pork loin were packaged in trays, covered with poly(vinyl chloride film. The trays were placed in a masterpack (MP, containing three gas compositions:  A 75% O2 : 25% CO2, B 50% O2 : 50% CO2 or C 100% CO2, and stored at 2 °C. Samples were taken after 1, 8, 15, and 22 days of storage, and evaluated for numerous shelf life traits. The development of Psychrotrophic aerobic bacteria and Pseudomonas spp. was found from the 15th day of storage. There was a significant treatment effect for some of the considered parameters, such as pH (P < 0.05 and color [L* (P < 0.07, a* (P < 0.07 and b* (P < 0.01]. There was a significant interaction (P < 0.01 for the TBARS values. It can be concluded, from the microbiological point of view, that the use of modified atmospheres containing 25% to 100% CO2 promotes the conservation of meat for up to 15 days of storage under refrigeration. From the point of view of color, atmospheres containing 75% O2 : 25% CO2 and 50% O2 : 50% CO2 ensure the color of packaged pork meat when stored at 2 °C for up to 15 days. From the point of view of lipid oxidation, packages with 100% CO2 are recommended for storage periods of more than 15 days, whereas those with 75% O2 : 25% CO2 are recommended for storage periods of up to 8 days.

  2. Effects of feeding ractopamine hydrochloride (Paylean) to physical and immunological castrates (Improvest) in a commercial setting on carcass cutting yields and loin quality.

    Science.gov (United States)

    Lowe, B K; Gerlemann, G D; Carr, S N; Rincker, P J; Schroeder, A L; Petry, D B; McKeith, F K; Allee, G L; Dilger, A C

    2014-08-01

    Effects of feeding ractopamine (RAC; 5 mg/kg) to physically castrated (PC) and immunologically castrated (IC) pigs on carcass characteristics, cutting yields, and loin quality were evaluated using 285 carcasses. Male pigs were randomly assigned to sex treatments (PC and IC) at birth and fed the same nursery diets before allotment into 32 pens with 22 pigs per pen in a grow-finish barn. Pigs in the PC group were physically castrated at approximately 5 d of age, and pigs in the IC group were administered Improvest at 11 and 18 wk of age. Diet treatments (control or RAC) were initiated on study d 87. Pigs were marketed at 12 d (4.5 wk post-second Improvest dose), 19 d (5.5 wk post-second Improvest dose), and 33 d (7.5 wk post-second Improvest dose) following the start of final diet treatments. Three carcasses per pen were selected for evaluation of cutting yields and loin quality. Data were analyzed using PROC MIXED in SAS with fixed effects of sex, diet, market group, and their interaction; carcass (N = 285) was the experimental unit. Carcasses from RAC-fed pigs were heavier (P cutting yields, RAC-fed carcasses had greater (P ≤ 0.03) bone-in lean and total carcass cutting yields than control-fed carcasses while there were no differences (P > 0.05) between RAC-fed and control-fed carcasses when evaluating LM color, marbling, firmness, pH, drip loss, and tenderness. Carcasses from IC pigs had greater (P cutting yields than PC carcasses. There were minimal differences (P cutting yields, LM color, marbling and firmness scores, pH, purge loss, composition, and tenderness. The results from this study indicated RAC and immunological castration were additive in terms of improving carcass cutting yields while having minimal effects on pork quality.

  3. Ductility of reinforced concrete columns confined with stapled strips

    International Nuclear Information System (INIS)

    Tahir, M.F.; Khan, Q.U.Z.; Shabbir, F.; Sharif, M.B.; Ijaz, N.

    2015-01-01

    Response of three 150x150x450mm short reinforced concrete (RC) columns confined with different types of confining steel was investigated. Standard stirrups, strips and stapled strips, each having same cross-sectional area, were employed as confining steel around four comer column bars. Experimental work was aimed at probing into the affect of stapled strip confinement on post elastic behavior and ductility level under cyclic axial load. Ductility ratios, strength enhancement factor and core concrete strengths were compared to study the affect of confinement. Results indicate that strength enhancement in RC columns due to strip and stapled strip confinement was not remarkable as compared to stirrup confined column. It was found that as compared to stirrup confined column, stapled strip confinement enhanced the ductility of RC column by 183% and observed axial capacity of stapled strip confined columns was 41 % higher than the strip confined columns. (author)

  4. Strip reduction testing of lubricants developed during ENFORM project

    DEFF Research Database (Denmark)

    Gazvoda, S.; Andreasen, Jan Lasson; Olsson, David Dam

    Strip reduction testing of lubricants developed during ENFORM project. Experiments were conducted with the strip reduction test [1] in order to classify experimental lubricants, developed during concerned project. One reference lubricant was used during testing....

  5. Refuges, flower strips, biodiversity and agronomic interest.

    Science.gov (United States)

    Roy, Grégory; Wateau, Karine; Legrand, Mickaël; Oste, Sandrine

    2008-01-01

    Several arthropods are natural predators of pests, and they are able to reduce and control their population development. FREDON Nord Pas-de-Calais (Federation Regionate de Defense contre les Organismes Nuisibles = Regional Federation for Pest Control) has begun for a long time to form farmers to the recognition of beneficial arthropods and to show them their usefulness. These beneficial insects or arachnids are present everywhere, in orchards and even in fields which are areas relatively poor in biodiversity. Adults feed in the flower strips instead larvae and some adults feed on preys such as aphids or caterpillars. Most of the time, beneficial insects can regulate pest but sometimes, in agricultural area, they can't make it early enough and efficiently. Their action begin too late and there biodiversity and number are too low. It's possible to enhance their action by manipulating the ecological infrastructures, like sewing flower strips or installing refuges. Flower strips increase the density of natural enemies and make them be present earlier in the field in order to control pests. Refuges permit beneficial's to spend winter on the spot. So they're able to be active and to grow in number earlier. From 2004 to 2007, on the one hand, FREDON Nord Pas-de-Calais has developed a research program. Its purpose was to inventory practices and also tools and means available and to judge the advisability of using such or such beneficial refuge in orchards. On the second hand, it studied the impact in orchard of refuges on population of beneficial's and the difference there were between manufactured refuges and homemade refuges. Interesting prospects were obtained with some of them. Otherwise, since 2003, FREDON has studied flower strips influence on beneficial population and their impact on pest control. In cabbage fields, results of trials have shown that flower strips lead to a reduction of aphid number under acceptable economic level, up to 50 meters from flower strips

  6. Consumer perceptions of beef healthiness: results from a qualitative study in four European countries.

    Science.gov (United States)

    Van Wezemael, Lynn; Verbeke, Wim; de Barcellos, Marcia D; Scholderer, Joachim; Perez-Cueto, Federico

    2010-06-15

    Consumer perception of the healthiness of beef is an important determinant of beef consumption. However, little is known about how consumers perceive the healthiness of beef. The aim of this study is to shed light on the associations between beef and health. Eight focus group discussions were conducted in four European countries (France, UK, Germany, Spain), each consisting of seven to nine participants. A content analysis was performed on the transcripts of these discussions. Although beef was generally perceived as healthful, focus group participants expected positive as well as negative effects of beef consumption on their health. Labelled, branded, fresh and lean beef were perceived as signalling healthful beef, in contrast with further processed and packaged beef. Consumers felt that their individual choices could make a difference with respect to the healthiness of beef consumed. Focus group participants were not in favour of improving beef healthiness during processing, but rather focussed on appropriate consumption behaviour and preparation methods. The individual responsibility for health implies that consumers should be able to make correct judgements about how healthful their food is. However, the results of this study indicate that an accurate assessment of beef healthiness is not always straightforward. The presented results on consumer perceptions of beef healthiness provide insights into consumer decision making processes, which are important for the innovation and product differentiation in the European beef sector, as well as for public health policy decisions related to meat consumption in general and beef consumption in particular.

  7. Parallel superconducting strip-line detectors: reset behaviour in the single-strip switch regime

    International Nuclear Information System (INIS)

    Casaburi, A; Heath, R M; Tanner, M G; Hadfield, R H; Cristiano, R; Ejrnaes, M; Nappi, C

    2014-01-01

    Superconducting strip-line detectors (SSLDs) are an important emerging technology for the detection of single molecules in time-of-flight mass spectrometry (TOF-MS). We present an experimental investigation of a SSLD laid out in a parallel configuration, designed to address selected single strip-lines operating in the single-strip switch regime. Fast laser pulses were tightly focused onto the device, allowing controllable nucleation of a resistive region at a specific location and study of the subsequent device response dynamics. We observed that in this regime, although the strip-line returns to the superconducting state after triggering, no effective recovery of the bias current occurs, in qualitative agreement with a phenomenological circuit simulation that we performed. Moreover, from theoretical considerations and by looking at the experimental pulse amplitude distribution histogram, we have the first confirmation of the fact that the phenomenological London model governs the current redistribution in these large area devices also after detection events. (paper)

  8. Study the Z-Plane Strip Capacitance

    International Nuclear Information System (INIS)

    Parikh, H.; Swain, S.

    2005-01-01

    The BaBaR detector at the Stanford Linear Accelerator Center is currently undergoing an upgrade to improve its muon and neutral hadron detection system. The Resistive Plate Chambers (RPCs) that had been used till now have deteriorated in performance over the past few years and are being replaced by Limited Streamer Tube (LSTs). Each layer of the system consists of a set of up to 10 streamer tube modules which provide one coordinate (φ coordinate) and a single ''Z-plane'' which provides the Z coordinate of the hit. The large area Z-planes (up to 12m 2 ) are 1mm thick and contain 96 copper strips that detect the induced charge from avalanches created in the streamer tube wires. All the Z-planes needed for the upgrade have already been constructed, but only a third of the planes were installed last summer. After installing the 24 Z-planes last year, it was learned that 0.7% of the strips were dead when put inside the detector. This was mainly due to the delicate solder joint between the read-out cable and the strip, and since it is difficult to access or replace the Z-planes inside the detector, it is very important to perform various tests to make sure that the Z-planes will be efficient and effective in the long term. We measure the capacitance between the copper strips and the ground plane, and compare it to the theoretical value that we expect. Instead of measuring the capacitance channel by channel, which would be a very tedious job, we developed a more effective method of measuring the capacitance. Since all the Z-planes were built at SLAC, we also built a smaller 46 cm by 30 cm Z-plane with 12 strips just to see how they were constructed and to gain a better understanding about the solder joints

  9. Beef flavor: a review from chemistry to consumer.

    Science.gov (United States)

    Kerth, Chris R; Miller, Rhonda K

    2015-11-01

    This paper briefly reviews research that describes the sensation, generation and consumer acceptance of beef flavor. Humans sense the five basic tastes in their taste buds, and receptors in the nasal and sinus cavities sense aromas. Additionally, trigeminal senses such as metallic and astringent are sensed in the oral and nasal cavities and can have an effect on the flavor of beef. Flavors are generated from a complex interaction of tastes, tactile senses and aromas taken collectively throughout the tongue, nasal, sinus and oral cavities. Cooking beef generates compounds that contribute to these senses and result in beef flavor, and the factors that are involved in the cookery process determine the amount and type of these compounds and therefore the flavor generated. A low-heat, slow cooking method generates primarily lipid degradation products, while high-heat, fast cookery generates more Maillard reaction products. The science of consumer acceptance, cluster analyses and drawing relationships among all flavor determinants is a relatively new discipline in beef flavor. Consumers rate beef that has lipid degradation products generated from a low degree of doneness and Maillard flavor products from fast, hot cookery the highest in overall liking, and current research has shown that strong relationships exist between beef flavor and consumer acceptability, even more so than juiciness or tenderness. © 2015 Society of Chemical Industry.

  10. Factors influencing intention to purchase beef in the Irish market.

    Science.gov (United States)

    McCarthy, M; de Boer, M; O'Reilly, S; Cotter, L

    2003-11-01

    This paper reports on the findings of a study into consumer perceptions towards beef and the influence of these perceptions on consumption. Fishbein and Ajzen's [Belief, attitude, intention and behaviour. An introduction to theory and research (1995) Reading, MA: Addison-Wesley] Theory of Reasoned Action (TRA) provided a useful framework for this analysis. The influence of attitudes and important others (subjective norm) on intention to consume beef were explored. The findings support the usefulness of this model in understanding behaviour towards beef. In this study both attitude and the subjective norm influenced intention to consume beef, but it was attitude that was of greater importance. Health, eating enjoyment and safety were most important determinants of attitude with price, environment and animal welfare less so. An evaluation of the impact of the introduction of new information which related to one belief (health) was also conducted. Those indicating that they would consider increasing their consumption of beef had a more positive attitude towards beef and had more positive health and eating enjoyment beliefs about beef than the 'no' group who had significantly higher safety concerns.

  11. Advection endash diffusion past a strip. II. Oblique incidence

    International Nuclear Information System (INIS)

    Knessl, C.; Keller, J.B.

    1997-01-01

    Advection and diffusion of particles past an impenetrable strip is considered when the strip is oblique to the advection or drift velocity. The particle concentration p(x,y) is determined asymptotically for large values of vL/D, where v is the drift velocity, D is the diffusion coefficient, and 2L is the width of the strip. The results complement those of Part I, which treated a strip normal to the drift velocity. copyright 1997 American Institute of Physics

  12. Current situation and future prospects for beef production in Europe.

    Science.gov (United States)

    Hocquette, Jean-Francois; Ellies-Oury, Marie-Pierre; Lherm, Michel; Pineau, Christele; Deblitz, Claus; Farmer, Linda

    2018-05-24

    The European Union (EU) is the world's third largest producer of beef. This contributes to the economy, rural development, social life, culture and gastronomy of Europe. The diversity of breeds, animal types (cows, bulls, steers, heifers) and farming systems (intensive, extensive on permanent or temporary pastures, mixed, breeders, feeders, etc) is a strength, and a weakness as the industry is often fragmented and poorly connected. There are also societal concerns regarding animal welfare and environmental issues, despite some positive environmental impacts of farming systems. The EU is amongst the most efficient for beef production as demonstrated by a relative low production of greenhouse gases. Due to regional differences in terms of climate, pasture availability, livestock practices and farms characteristics, productivity and incomes of beef producers vary widely across regions, being among the lowest of the agricultural systems. The beef industry is facing unprecedented challenges related to animal welfare, environmental impact, origin, authenticity, nutritional benefits and eating quality of beef. These may affect the whole industry, especially its farmers. It is therefore essential to bring the beef industry together to spread best practice and better exploit research in order to maintain and develop an economically viable and sustainable beef industry. Meeting consumers' expectations may be achieved by a better prediction of beef palatability using a modelling approach, such as in Australia. There is a need for accurate information and dissemination on the benefits and issues of beef for human health and for environmental impact. A better objective description of goods and services derived from livestock farming is also required. Putting into practice "agroecology" and organic farming principles are other potential avenues for the future. Different future scenarios can be written depending on the major driving forces, notably meat consumption, climate

  13. Testbeam evaluation of silicon strip modules for ATLAS Phase - II Strip Tracker Upgrade

    CERN Document Server

    Blue, Andrew; The ATLAS collaboration; Ai, Xiaocong; Allport, Phillip; Arling, Jan-Hendrik; Atkin, Ryan Justin; Bruni, Lucrezia Stella; Carli, Ina; Casse, Gianluigi; Chen, Liejian; Chisholm, Andrew; Cormier, Kyle James Read; Cunningham, William Reilly; Dervan, Paul; Diez Cornell, Sergio; Dolezal, Zdenek; Dopke, Jens; Dreyer, Etienne; Dreyling-Eschweiler, Jan Linus Roderik; Escobar, Carlos; Fabiani, Veronica; Fadeyev, Vitaliy; Fernandez Tejero, Javier; Fleta Corral, Maria Celeste; Gallop, Bruce; Garcia-Argos, Carlos; Greenall, Ashley; Gregor, Ingrid-Maria; Greig, Graham George; Guescini, Francesco; Hara, Kazuhiko; Hauser, Marc Manuel; Huang, Yanping; Hunter, Robert Francis Holub; Keller, John; Klein, Christoph; Kodys, Peter; Koffas, Thomas; Kotek, Zdenek; Kroll, Jiri; Kuehn, Susanne; Lee, Steven Juhyung; Liu, Yi; Lohwasser, Kristin; Meszarosova, Lucia; Mikestikova, Marcela; Mi\\~nano Moya, Mercedes; Mori, Riccardo; Moser, Brian; Nikolopoulos, Konstantinos; Peschke, Richard; Pezzullo, Giuseppe; Phillips, Peter William; Poley, Anne-luise; Queitsch-Maitland, Michaela; Ravotti, Federico; Rodriguez Rodriguez, Daniel

    2018-01-01

    The planned HL-LHC (High Luminosity LHC) is being designed to maximise the physics potential of the LHC with 10 years of operation at instantaneous luminosities of \\mbox{$7.5\\times10^{34}\\;\\mathrm{cm}^{-2}\\mathrm{s}^{-1}$}. A consequence of this increased luminosity is the expected radiation damage requiring the tracking detectors to withstand hadron equivalences to over $1x10^{15}$ 1 MeV neutron equivalent per $cm^{2}$ in the ATLAS Strips system. The silicon strip tracker exploits the concept of modularity. Fast readout electronics, deploying 130nm CMOS front-end electronics are glued on top of a silicon sensor to make a module. The radiation hard n-in-p micro-strip sensors used have been developed by the ATLAS ITk Strip Sensor collaboration and produced by Hamamatsu Photonics. A series of tests were performed at the DESY-II test beam facility to investigate the detailed performance of a strip module with both 2.5cm and 5cm length strips before irradiation. The DURANTA telescope was used to obtain a pointing...

  14. 7 CFR 29.6128 - Straight Stripped (X Group).

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Straight Stripped (X Group). 29.6128 Section 29.6128... REGULATIONS TOBACCO INSPECTION Standards Grades § 29.6128 Straight Stripped (X Group). This group consists of..., and tolerances X1 Fine Quality Straight Stripped. Heavy, ripe, firm, semielastic, normal strength and...

  15. Heat shock and thermotolerance of Escherichia coli O157:H7 in a model beef gravy system and ground beef.

    Science.gov (United States)

    Juneja, V K; Klein, P G; Marmer, B S

    1998-04-01

    Duplicate beef gravy or ground beef samples inoculated with a suspension of a four-strain cocktail of Escherichia coli O157:H7 were subjected to sublethal heating at 46 degrees C for 15-30 min, and then heated to a final internal temperature of 60 degrees C. Survivor curves were fitted using a linear model that incorporated a lag period (TL), and D-values and 'time to a 4D inactivation' (T4D) were calculated. Heat-shocking allowed the organism to survive longer than non-heat-shocked cells; the T4D values at 60 degrees C increased 1.56- and 1.50-fold in beef gravy and ground beef, respectively. In ground beef stored at 4 degrees C, thermotolerance was lost after storage for 14 h. However, heat-shocked cells appeared to maintain their thermotolerance for at least 24 h in ground beef held to 15 or 28 degrees C. A 25 min heat shock at 46 degrees C in beef gravy resulted in an increase in the levels of two proteins with apparent molecular masses of 60 and 69 kDa. These two proteins were shown to be immunologically related to GroEL and DnaK, respectively. Increased heat resistance due to heat shock must be considered while designing thermal processes to assure the microbiological safety of thermally processed foods.

  16. Light microscopy and image analysis of thin filament lengths utilizing dual probes on beef, chicken, and rabbit myofibrils.

    Science.gov (United States)

    Ringkob, T P; Swartz, D R; Greaser, M L

    2004-05-01

    Image analysis procedures for immunofluorescence microscopy were developed to measure muscle thin filament lengths of beef, rabbit, and chicken myofibrils. Strips of beef cutaneous trunci, rectus abdominis, psoas, and masseter; chicken pectoralis; and rabbit psoas muscles were excised 5 to 30 min postmortem. Fluorescein phalloidin and rhodamine myosin subfragment-1 (S1) were used to probe the myofibril structure. Digital images were recorded with a cooled charge-coupled device controlled with IPLab Spectrum software (Signal Analytics Corp.) on a Macintosh operating system. The camera was attached to an inverted microscope, using both the phase-contrast and fluorescence illumination modes. Unfixed myofibrils incubated with fluorescein phalloidin showed fluorescence primarily at the Z-line and the tips of the thin filaments in the overlap region. Images were processed using IPLab and the National Institutes of Health's Image software. A region of interest was selected and scaled by a factor of 18.18, which enlarged the image from 11 pixels/microm to approximately 200 pixels/microm. An X-Y plot was exported to Spectrum 1.1 (Academic Software Development Group), where the signal was processed with a second derivative routine, so a cursor function could be used to measure length. Fixation before phalloidin incubation resulted in greatest intensity at the Z lines but a more-uniform staining over the remainder of the thin filament zone. High-resolution image capture and processing showed that thin filament lengths were significantly different (P < 0.01) among beef, rabbit, and chicken, with lengths of 1.28 to 1.32 microm, 1.16 microm, and 1.05 microm, respectively. Measurements using the S1 signal confirmed the phalloidin results. Fluorescent probes may be useful to study sarcomere structure and help explain species and muscle differences in meat texture.

  17. Prediction of troponin-T degradation using color image texture features in 10d aged beef longissimus steaks.

    Science.gov (United States)

    Sun, X; Chen, K J; Berg, E P; Newman, D J; Schwartz, C A; Keller, W L; Maddock Carlin, K R

    2014-02-01

    The objective was to use digital color image texture features to predict troponin-T degradation in beef. Image texture features, including 88 gray level co-occurrence texture features, 81 two-dimension fast Fourier transformation texture features, and 48 Gabor wavelet filter texture features, were extracted from color images of beef strip steaks (longissimus dorsi, n = 102) aged for 10d obtained using a digital camera and additional lighting. Steaks were designated degraded or not-degraded based on troponin-T degradation determined on d 3 and d 10 postmortem by immunoblotting. Statistical analysis (STEPWISE regression model) and artificial neural network (support vector machine model, SVM) methods were designed to classify protein degradation. The d 3 and d 10 STEPWISE models were 94% and 86% accurate, respectively, while the d 3 and d 10 SVM models were 63% and 71%, respectively, in predicting protein degradation in aged meat. STEPWISE and SVM models based on image texture features show potential to predict troponin-T degradation in meat. © 2013.

  18. Prevalence and quantification of Listeria monocytogenes in beef offal at retail level in Selangor, Malaysia

    Science.gov (United States)

    Kuan, Chee Hao; Wong, Woan Chwen; Pui, Chai Fung; Mahyudin, Nor Ainy; Tang, John Yew Huat; Nishibuchi, Mitsuaki; Radu, Son

    2013-01-01

    A total of 63 beef offal samples (beef liver = 16; beef lung = 14; beef intestine = 9; beef tripe = 15; beef spleen = 9) from three wet markets (A, B, and C) in Selangor, Malaysia were examined for the prevalence and microbial load of Listeria monocytogenes. A combination of the most probable number and polymerase chain reaction (MPN-PCR) method was employed in this study. It was found that L. monocytogenes detected in 33.33% of the beef offal samples. The prevalence of L. monocytogenes in beef offal purchased from wet markets A, B, and C were 22.73%, 37.50% and 41.18% respectively. The density of L. monocytogenes in all the samples ranged from 2,400 MPN/g. The findings in this study indicate that beef offal can be a potential vehicle of foodborne listeriosis. PMID:24688507

  19. Prevalence and quantification of Listeria monocytogenes in beef offal at retail level in Selangor, Malaysia.

    Science.gov (United States)

    Kuan, Chee Hao; Wong, Woan Chwen; Pui, Chai Fung; Mahyudin, Nor Ainy; Tang, John Yew Huat; Nishibuchi, Mitsuaki; Radu, Son

    2013-12-01

    A total of 63 beef offal samples (beef liver = 16; beef lung = 14; beef intestine = 9; beef tripe = 15; beef spleen = 9) from three wet markets (A, B, and C) in Selangor, Malaysia were examined for the prevalence and microbial load of Listeria monocytogenes. A combination of the most probable number and polymerase chain reaction (MPN-PCR) method was employed in this study. It was found that L. monocytogenes detected in 33.33% of the beef offal samples. The prevalence of L. monocytogenes in beef offal purchased from wet markets A, B, and C were 22.73%, 37.50% and 41.18% respectively. The density of L. monocytogenes in all the samples ranged from 2,400 MPN/g. The findings in this study indicate that beef offal can be a potential vehicle of foodborne listeriosis.

  20. Prevalence and quantification of Listeria monocytogenes in beef offal at retail level in Selangor, Malaysia

    Directory of Open Access Journals (Sweden)

    Chee Hao Kuan

    2013-12-01

    Full Text Available A total of 63 beef offal samples (beef liver = 16; beef lung = 14; beef intestine = 9; beef tripe = 15; beef spleen = 9 from three wet markets (A, B, and C in Selangor, Malaysia were examined for the prevalence and microbial load of Listeria monocytogenes. A combination of the most probable number and polymerase chain reaction (MPN-PCR method was employed in this study. It was found that L. monocytogenes detected in 33.33% of the beef offal samples. The prevalence of L. monocytogenes in beef offal purchased from wet markets A, B, and C were 22.73%, 37.50% and 41.18% respectively. The density of L. monocytogenes in all the samples ranged from 2,400 MPN/g. The findings in this study indicate that beef offal can be a potential vehicle of foodborne listeriosis.

  1. Prevalence and distribution of Arcobacter spp. in raw milk and retail raw beef.

    Science.gov (United States)

    Shah, A H; Saleha, A A; Murugaiyah, M; Zunita, Z; Memon, A A

    2012-08-01

    A total of 106 beef samples which consisted of local (n = 59) and imported (n = 47) beef and 180 milk samples from cows (n = 86) and goats (n = 94) were collected from Selangor, Malaysia. Overall, 30.2% (32 of 106) of beef samples were found positive for Arcobacter species. Imported beef was significantly more contaminated (46.80%) than local beef (16.9%). Arcobacter butzleri was the species isolated most frequently from imported (81.8%) and local (60%) beef, followed by Arcobacter cryaerophilus in local (33.3%) and imported (18.2%) beef samples. Only one local beef sample (10%) yielded Arcobacter skirrowii. Arcobacter species were detected from cow's milk (5.8%), with A. butzleri as the dominant species (60%), followed by A. cryaerophilus (40%), whereas none of the goat's milk samples were found positive for Arcobacter. This is the first report of the detection of Arcobacter in milk and beef in Malaysia.

  2. Alpharma Beef Cattle Nutrition Symposium: implications of nutritional management for beef cow-calf systems.

    Science.gov (United States)

    Funston, R N; Summers, A F; Roberts, A J

    2012-07-01

    The beef cattle industry relies on the use of high-forage diets to develop replacement females, maintain the cow herd, and sustain stocker operations Forage quantity and quality fluctuate with season and environmental conditions Depending on class and physiological state of the animal, a forage diet may not always meet nutritional requirements, resulting in reduced ADG or BW loss if supplemental nutrients are not provided It is important to understand the consequences of such BW loss and the economics of providing supplementation to the beef production system Periods of limited or insufficient nutrient availability can be followed by periods of compensatory BW gain once dietary conditions improve This may have less impact on breeding animals, provided reproductive efficiency is not compromised, where actual BW is not as important as it is in animals destined for the feedlot A rapidly evolving body of literature is also demonstrating that nutritional status of cows during pregnancy can affect subsequent offspring development and production characteristics later in life The concept of fetal programming is that maternal stimuli during critical periods of fetal development have long-term implications for offspring Depending on timing, magnitude, and duration of nutrient limitation or supplementation, it is possible that early measures in life, such as calf birth BW, may be unaffected, whereas measures later in life, such as weaning BW, carcass characteristics, and reproductive traits, may be influenced This body of research provides compelling evidence of a fetal programming response to maternal nutrition in beef cattle Future competitiveness of the US beef industry will continue to be dependent on the use of high-forage diets to meet the majority of nutrient requirements Consequences of nutrient restriction or supplementation must be considered not only on individual animal performance but also the developing fetus and its subsequent performance throughout life.

  3. The extent of the stop coannihilation strip

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, John [King' s College London, Theoretical Particle Physics and Cosmology Group, Department of Physics, London (United Kingdom); CERN, Theory Division, Geneva 23 (Switzerland); Olive, Keith A. [University of Minnesota, School of Physics and Astronomy, Minneapolis, MN (United States); University of Minnesota, William I. Fine Theoretical Physics Institute, School of Physics and Astronomy, Minneapolis, MN (United States); Zheng, Jiaming [University of Minnesota, School of Physics and Astronomy, Minneapolis, MN (United States)

    2014-07-15

    Many supersymmetric models such as the constrained minimal supersymmetric extension of the Standard Model (CMSSM) feature a strip in parameter space where the lightest neutralino χ is identified as the lightest supersymmetric particle, the lighter stop squark t{sub 1} is the next-to-lightest supersymmetric particle (NLSP), and the relic χ cold darkmatter density is brought into the range allowed by astrophysics and cosmology by coannihilation with the lighter stop squark t{sub 1} NLSP. We calculate the stop coannihilation strip in the CMSSM, incorporating Sommerfeld enhancement effects, and we explore the relevant phenomenological constraints and phenomenological signatures. In particular, we show that the t{sub 1} may weigh several TeV, and its lifetime may be in the nanosecond range, features that are more general than the specific CMSSM scenarios that we study in this paper. (orig.)

  4. Strip-till seeder for sugar beets

    Directory of Open Access Journals (Sweden)

    Peter Schulze Lammers

    2014-06-01

    Full Text Available Strip-till save costs by reducing tillage on the area of sugar beet rows only. The seeding system is characterized by a deep loosening of soil with a tine combined with a share and by following tools generating fine-grained soil as seed bed. In cooperation with the Kverneland company group Soest/Germany a strip tiller combined with precision seeder was designed and tested in field experiments. Tilling and seeding was performed in one path on fields with straw and mustard mulch. Even the plant development was slower as compared to conventional sawn sugar beets the yield was on equivalent level. Further field experiments are planned to attest constant yield, cost and energy efficiency of the seeding system.

  5. Dual deflectable beam strip engine development.

    Science.gov (United States)

    Dulgeroff, C. R.; Zuccaro, D. E.; Kami, S.; Schnelker, D. E.; Ward, J. W.

    1972-01-01

    This paper describes a dual beam thruster that has been designed, constructed, and tested. The system is suitable for two-axes attitude control and is comprised of two orthogonal strips, each capable of producing 0.30 mlb thrust and beam deflections of more than plus or minus 20 deg. The nominal specific impulse for the thruster is 5000 sec, and the thrust level from each strip can be varied from 0 to 100%. Neutralizer filaments that were developed and life tested over 2000 hours producing more than 40 mA of electron emission per watt of input power are also discussed. The system power required for clean ionizers is approximately 200 W.

  6. L-strip proximity fed ga

    Directory of Open Access Journals (Sweden)

    Ashish Singh

    2014-03-01

    Full Text Available In this article, the analysis of dualband L-strip fed compact semi-circular disk microstrip patch antenna has been presented using circuit theory concept. The antenna parameters such as return loss, VSWR and radiation pattern are calculated. The effect of geometric dimensions of the proposed antenna such as length of vertical and horizontal portion of L-strip is investigated. It is found that antenna resonate at two distinct modes i.e. 1.3 GHz and 6.13 GHz for lower and upper resonance frequencies respectively. The bandwidth of the proposed antenna at lower resonance frequency is 6.61% (simulated and 10.64% (theoretical whereas at upper resonance frequency, it is 6.02% (simulated and 9.06 % (theoretical. The theoretical results are compared with IE3D simulation results as well as experimental results and they are in close agreement.

  7. Nuclear reactor spring strip grid spacer

    International Nuclear Information System (INIS)

    Patterson, J.F.; Flora, B.S.

    1980-01-01

    An improved and novel grid spacer was developed for use in nuclear reactor fuel assemblies. It is comprised of a series of intersecting support strips and a peripheral support band attached to the ends of the support strips. Each of the openings into which the fuel element is inserted has a number of protruding dimples and springs extending in different directions. The dimples coact with the springs to secure the fuel rods in the openings. Compared with previous designs, this design gives more positive alignment of the support stips while allowing greater flexibility to counterbalance the effects of thermal expansion. The springs are arranged in alternating directions so that the reaction forces tend to counterbalance each other, which in turn minimizes the reaction loads on the supporting structure. (D.N.)

  8. Electron capture by highly stripped ions

    International Nuclear Information System (INIS)

    Greenland, P.T.

    1981-06-01

    This review describes theories of electron capture suitable for the description of rearrangement collisions between atomic hydrogen and completely stripped projectiles with charge greater than unity. The region of impact velocity considered lies between 0.05 and 3 au, which is of technological importance in fusion power devices. The semiclassical, impact parameter formalism is discussed and the use of atomic expansions at medium impact velocity is described. Experimental results for both completely and partially stripped projectiles are reviewed. The use of a molecular basis at low energy, and the role of pseudocrossings peculiar to the two centre Coulomb interaction are described. Finally, purely classical techniques, in which the electron wavefunction is represented by an ensemble of Kepler orbits are considered. The review was completed in February 1981. (author)

  9. Continuous liquid sheet generator for ion stripping

    International Nuclear Information System (INIS)

    Gavin, B.; Batson, P.; Leemann, B.; Rude, B.

    1984-10-01

    Many of the technical problems of generating a large thin liquid sheet from 0.02 to 0.20 μm thick (3 to 40 μgm/cm 2 ) have been solved. It is shown that this perennial sheet is stable and consonant in dimension. Several ion beam species from the SuperHILAC have been used for evaluation; at 0.11 MeV/n. In one of three modes this sheet serves as an equivalent substitute for a carbon foil. The second mode is characterized by a solid-like charge state distribution but with a varying fraction of unstripped ions. The third mode gives stripping performance akin to a vapor stripping medium. 9 references, 7 figures

  10. Large strip RPCs for the LEPS2 TOF system

    Energy Technology Data Exchange (ETDEWEB)

    Tomida, N., E-mail: natsuki@scphys.kyoto-u.ac.jp [Department of Physics, Kyoto University, Kyoto 606-8502 (Japan); Niiyama, M. [Department of Physics, Kyoto University, Kyoto 606-8502 (Japan); Ohnishi, H. [RIKEN (The Institute of Physical and Chemical Research), Wako, Saitama 351-0198 (Japan); Tran, N. [Research Center for Nuclear Physics (RCNP), Osaka University, Ibaraki, Osaka 567-0047 (Japan); Hsieh, C.-Y.; Chu, M.-L.; Chang, W.-C. [Institute of Physics, Academia Sinica, Nankang, Taipei 11529, Taiwan (China); Chen, J.-Y. [National Synchrotron Radiation Research Center (NSRRC), Hsinchu 30076, Taiwan (China)

    2014-12-01

    High time-resolution resistive plate chambers (RPCs) with large-size readout strips are developed for the time-of-flight (TOF) detector system of the LEPS2 experiment at SPring-8. The experimental requirement is a 50-ps time resolution for a strip size larger than 100 cm{sup 2}/channel. We are able to achieve 50-ps time resolutions with 2.5×100 cm{sup 2} strips by directly connecting the amplifiers to strips. With the same time resolution, the number of front-end electronics (FEE) is also reduced by signal addition. - Highlights: • Find a way to achieve a good time resolution with a large strip RPC. • 2.5 cm narrow strips have better resolutions than 5.0 cm ones. • The 0.5 mm narrow strip interval shows flat time resolutions between strips. • FEEs directly connected to strips make the signal reflection at the strip edge small. • A time resolution of 50 ps was achieved with 2.5 cm×100 cm strips.

  11. sensory analysis of cooked fresh meat sausages containing beef offal

    African Journals Online (AJOL)

    user

    Sensory analysis of cooked fresh meat sausages containing beef offal. 22 .... Trained and consumer pan- els from the local black ... selected as the best formulations or recipes, as judged by the ... loosening of the sausage from the pan with a.

  12. Identification of Social Capital on Beef Cattle Farmers Group

    Science.gov (United States)

    Lestari, V. S.; Sirajuddin, S. N.; Abdullah, A.

    2018-02-01

    Social capital plays an important role in the development of beef cattle farms in South Sulawesi. The aim of this research was to know the social capital of beef cattle farmers in South Sulawesi. Population of this research was 31 beef cattle farmers. Variable of social capital was mutual trust, norms and linkage. The data were collected from observation and depth interview by using questionnaire. There were 10 questions which were adopted from Australian Center for International Agriculture Research. The answer was scored by using Likert scale ranging from 1 refer to strongly disagree; 2 refer to disagree; 3 refer to not sure; 4 refer to agree and 5 refer to strongly agree. The data were analyzed descriptively by using frequency distribution. The research revealed that the social capital of beef cattle farmers was categorized as “high”.

  13. Preservation by ionization of refrigerated vacuum-packed ground beef

    International Nuclear Information System (INIS)

    Soualhia, Z.

    1998-01-01

    The application of doses of 1, 2, 3, 4, 5 KGy is interesting to lower significantly the contamination microbial flora in ground beef without changing significantly for all that original qualities. Treatment combining ionization (5 KGy) and / or salting (2 %) increases of almost 2 months the duration of refrigerated conservation of Vacuum-packed ground beef with no major change in initial quality. In ionized beef (5 KGy) and / or salted (2 %), the rate of psychotropic germs stays inferior to the threshold superficial putrefaction at all conservation stages. Moreover, faecal contamination pilots, mouldiness, yeast and pathogenic micro-organisms are totally absent in treated samples. Reduction effect of salt is observed at all stages of refrigerated storage. Finally, after cooking, ionizing dose does not change significantly loss of weight and pH of ground beef heated at 100 degrees C in bain-marie or 150 degrees C in drying over during one hour (author)

  14. Genetic parameters for reproductive traits in a beef cattle herd ...

    African Journals Online (AJOL)

    Unknown

    Keywords: beef cattle, breeding, genetics, heritability, reproduction .... nature of the female reproductive traits or to the large influence of unidentified environmental effects on ..... Factors affecting some performance traits in Friesian cattle.

  15. Safety of street vended meat products - chicken and beef suya

    African Journals Online (AJOL)

    USER

    2010-06-28

    Jun 28, 2010 ... suya (105 and 105/g and beef suya (102/g) before and after heating the following ... treatments in a completely randomized design of collected samples ... bacillus to differentiate between lactose and non-lactose fermenting.

  16. Changes in the beef cattle industry through application of scientific ...

    African Journals Online (AJOL)

    insemination, oestrus synchronization, and management systems for ... Most of these changes have had and will have an economic impact on the ..... of ET to produce bulls for use in AI in beef cattle is still in ..... and future implications - 1983.

  17. The profitability of beef production under semi-extensive conditions

    African Journals Online (AJOL)

    used and discussed included nett farm income per R100 capital investment and .... Although depreciation of fixed improvements and on equip- ment was calculated ..... Furthermore, another practice commonly found· amongst beef producers.

  18. Factors influencing Consumer Preference for Fresh Beef in Sokoto ...

    African Journals Online (AJOL)

    SH

    selected and interviewed to identify factors that affect preference for fresh beef and to determine the nature of the ... preference are appreciated by the food ... composition and household income .... habit and flavor, made them to prefer fresh.

  19. Towards a regional beef carcass classification system for Southern ...

    African Journals Online (AJOL)

    Mapiye, C, Dr

    2017-05-15

    May 15, 2017 ... beef carcass grading and classification systems used in the region ..... between cattle breeds (genetic), pre-slaughter stress and growth- ..... Nguni cattle for example, owing to their adaptability (i.e. drought and heat tolerant,.

  20. National genetic improvement programmes in the United States beef ...

    African Journals Online (AJOL)

    cattle industry is accepting, in fact, demanding estimates of genetic values on yearling bulls. Single and multiple analy ... ordinary event occurred with the formation of the Beef ... assumed genetic trend was non-existent or relatively unimportant ...

  1. Moving strip technique of electron beam therapy

    Energy Technology Data Exchange (ETDEWEB)

    Matsushima, Kishio; Wakasa, Hiroyuki; Oguri, Nobuhiro; Kitayama, Takuichi; Nakagiri, Yoshitada; Mikami, Yasutaka; Hashimoto, Keiji; Hiraki, Yoshio; Aono, Kaname

    1984-12-01

    The fieldsize in electron beam therapy is determined by the cone size. In case of skin metastasis of a malignant tumor and so on, which need a large field size and whose area is much larger than the size of the cone, a large field size is usually produced by dividing the portals. However, the dose distribution at the border of the field becomes unequal, and hot and cold dose areas are produced according to the distance between portals. We tried the strip field technique in a large field along the long axis of the body in order to flatten the dose of the border employing the moving strip used for whole abdominal irradiation in ovarian cancer. We set the film in Mix-DP and used the strip field technique with 2.5cm steps. We discussed the relationship between the interval (distance between portals) and the flattening of the dose within the field. Skin movement due to breathing and influences on the flattening of the dose were considered. The proper flatness was obtained at depths of 0,1,2, and 3cm by setting the interval at 0.5cm. When skin movement was produced by breathing in +-1.5mm, the proper flaness was obtained also at a 0.5-cm interval. It seems that smoothing is increased by breathing. An ''electron beam moving strip'' with a 2.5-cm step and 0.5-cm interval was clinically effective in the treatment of patients with skin metastasis of colon cancer. (author).

  2. Ram pressure stripping of tilted galaxies

    Czech Academy of Sciences Publication Activity Database

    Jáchym, Pavel; Köppen, J.; Palouš, Jan; Combes, F.

    2009-01-01

    Roč. 500, č. 2 (2009), s. 693-703 ISSN 0004-6361 R&D Projects: GA MŠk(CZ) LC06014; GA ČR GP205/08/P556 Institutional research plan: CEZ:AV0Z10030501 Keywords : interstellar medium * clusters of galaxies * gas stripping Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.179, year: 2009

  3. Cathode readout with stripped resistive drift tubes

    International Nuclear Information System (INIS)

    Bychkov, V.N.; Kekelidze, G.D.; Novikov, E.A.; Peshekhonov, V.D.; Shafranov, M.D.; Zhiltsov, V.E.

    1995-01-01

    A straw tube drift chamber prototype has been constructed and tested. The straw tube material is mylar film covered with a carbon layer with a resistivity of 0.5, 30 and 70 kΩ/□. Both the anode wire and the cathode strip signals were detected to study the behaviour of the chamber in the presence of X-ray ionization. The construction and the results of the study are presented. (orig.)

  4. Cathode readout with stripped resistive drift tubes

    Science.gov (United States)

    Bychkov, V. N.; Kekelidze, G. D.; Novikov, E. A.; Peshekhonov, V. D.; Shafranov, M. D.; Zhiltsov, V. E.

    1995-12-01

    A straw tube drift chamber prototype has been constructed and tested. The straw tube material is mylar film covered with a carbon layer with a resistivity of 0.5, 30 and 70 kΩ/□. Both the anode wire and the cathode strip signals were detected to study the behaviour of the chamber in the presence of X-ray ionization. The construction and the results of the study are presented.

  5. Value-added beef products (Productos Carnicos con Valor Agregado)

    Science.gov (United States)

    Mac Donaldson; Will Holder; Jan Holder

    2006-01-01

    I'm speaking for Will and Jan Holder, who couldn't be here. I happen to be familiar with Will and Jan's company, Ervin's Natural Beef, and its program because I've sold them cattle. Will and Jan's value-added beef program is based on their family ranch in the area known as The Blue, in the mountains of eastern Arizona.

  6. Multiple Electron Stripping of Heavy Ion Beams

    International Nuclear Information System (INIS)

    Mueller, D.; Grisham, L.; Kaganovich, I.; Watson, R. L.; Horvat, V.; Zaharakis, K. E.; Peng, Y.

    2002-01-01

    One approach being explored as a route to practical fusion energy uses heavy ion beams focused on an indirect drive target. Such beams will lose electrons while passing through background gas in the target chamber, and therefore it is necessary to assess the rate at which the charge state of the incident beam evolves on the way to the target. Accelerators designed primarily for nuclear physics or high energy physics experiments utilize ion sources that generate highly stripped ions in order to achieve high energies economically. As a result, accelerators capable of producing heavy ion beams of 10 to 40 Mev/amu with charge state 1 currently do not exist. Hence, the stripping cross-sections used to model the performance of heavy ion fusion driver beams have, up to now, been based upon theoretical calculations. We have investigated experimentally the stripping of 3.4 Mev/amu Kr 7+ and Xe +11 in N2; 10.2 MeV/amu Ar +6 in He, N2, Ar and Xe; 19 MeV/amu Ar +8 in He, N2, Ar and Xe; 30 MeV He 1 + in He, N2, Ar and Xe; and 38 MeV/amu N +6 in He, N2, Ar and Xe. The results of these measurements are compared with the theoretical calculations to assess their applicability over a wide range of parameters

  7. Deuteron stripping reactions with Tabakin potential

    International Nuclear Information System (INIS)

    Osman, A.

    1976-05-01

    Deuteron stripping reactions are considered. Due to the strong repulsion between nucleons at very short distances, we have investigated the nuclear short-range correlations. The neutron proton nuclear potential in the deuteron is taken as a short-range repulsive core surrounded by a long-range attractive potential. The neutron-proton potential is taken as the Tabakin separable potential to take into account the short-range correlations. The differential cross-sections for deuteron stripping reactions have been calculated in two different cases by taking Yamaguchi or Breit et al type parameters for the Tabakin potential used. The angular distributions for different (d,p) stripping reactions on the different target nuclei 28 Si, 32 , 34 S, 36 Ar, 40 , 48 Ca, 50 , 52 , 54 Cr have been calculated using the DWBA calculations. Our present theoretical calculations for the angular distributions of the different reactions cosidered have been fitted to the experimental data, where good agreement is obtained. The extracted spectroscopic factors from the present work are found to be more reliable

  8. The Argonne silicon strip-detector array

    Energy Technology Data Exchange (ETDEWEB)

    Wuosmaa, A H; Back, B B; Betts, R R; Freer, M; Gehring, J; Glagola, B G; Happ, Th; Henderson, D J; Wilt, P [Argonne National Lab., IL (United States); Bearden, I G [Purdue Univ., Lafayette, IN (United States). Dept. of Physics

    1992-08-01

    Many nuclear physics experiments require the ability to analyze events in which large numbers of charged particles are detected and identified simultaneously, with good resolution and high efficiency, either alone, or in coincidence with gamma rays. The authors have constructed a compact large-area detector array to measure these processes efficiently and with excellent energy resolution. The array consists of four double-sided silicon strip detectors, each 5x5 cm{sup 2} in area, with front and back sides divided into 16 strips. To exploit the capability of the device fully, a system to read each strip-detector segment has been designed and constructed, based around a custom-built multi-channel preamplifier. The remainder of the system consists of high-density CAMAC modules, including multi-channel discriminators, charge-sensing analog-to-digital converters, and time-to-digital converters. The array`s performance has been evaluated using alpha-particle sources, and in a number of experiments conducted at Argonne and elsewhere. Energy resolutions of {Delta}E {approx} 20-30 keV have been observed for 5 to 8 MeV alpha particles, as well as time resolutions {Delta}T {<=} 500 ps. 4 figs.

  9. CLOSED-LOOP STRIPPING ANALYSIS (CLSA) OF ...

    Science.gov (United States)

    Synthetic musk compounds have been found in surface water, fish tissues, and human breast milk. Current techniques for separating these compounds from fish tissues require tedious sample clean-upprocedures A simple method for the deterrnination of these compounds in fish tissues has been developed. Closed-loop stripping of saponified fish tissues in a I -L Wheaton purge-and-trap vessel is used to strip compounds with high vapor pressures such as synthetic musks from the matrix onto a solid sorbent (Abselut Nexus). This technique is useful for screening biological tissues that contain lipids for musk compounds. Analytes are desorbed from the sorbent trap sequentially with polar and nonpolar solvents, concentrated, and directly analyzed by high resolution gas chromatography coupled to a mass spectrometer operating in the selected ion monitoring mode. In this paper, we analyzed two homogenized samples of whole fish tissues with spiked synthetic musk compounds using closed-loop stripping analysis (CLSA) and pressurized liquid extraction (PLE). The analytes were not recovered quantitatively but the extraction yield was sufficiently reproducible for at least semi-quantitative purposes (screening). The method was less expensive to implement and required significantly less sample preparation than the PLE technique. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water,

  10. Beef alliances: motivations, extent, and future prospects.

    Science.gov (United States)

    Schroeder, Ted C; Kovanda, Joseph

    2003-07-01

    With their growth, it is important to consider how alliances will impact the beef industry in the future. Alliances have the potential to make sweeping changes to cattle production, live and feeder cattle marketing, food safety protocols, use of government grades and standards, ownership structure, supply chain management, wholesale and retail product marketing, risk management, and many other industry activities. In an effort to address these issues, this article addresses the following questions: What is an alliance? What has motivated their proliferation? What have we learned from alliances? What aspects of alliances affect their likelihood of success or failure? What is the future of alliances? Are they a fad or a long-term evolving industry structural change?

  11. Noise analysis due to strip resistance in the ATLAS SCT silicon strip module

    International Nuclear Information System (INIS)

    Kipnis, I.

    1996-08-01

    The module is made out of four 6 cm x 6 cm single sided Si microstrip detectors. Two detectors are butt glued to form a 12 cm long mechanical unit and strips of the two detectors are electrically connected to form 12 cm long strips. The butt gluing is followed by a back to back attachment. The module in this note is the Rφ module where the electronics is oriented parallel to the strip direction and bonded directly to the strips. This module concept provides the maximum signal-to-noise ratio, particularly when the front-end electronics is placed near the middle rather than at the end. From the noise analysis, it is concluded that the worst-case ΔENC (far-end injection) between end- and center-tapped modules will be 120 to 210 el. rms (9 to 15%) for a non-irradiated detector and 75 to 130 el. rms (5 to 9%) for an irradiated detector, for a metal strip resistance of 10 to 20 Ω/cm

  12. Mexican consumers at the point of meat purchase. Beef choice.

    Science.gov (United States)

    Ngapo, T M; Braña Varela, D; Rubio Lozano, M S

    2017-12-01

    Within-consumer preference replication achieved through systematic image manipulation was used in consumer surveys in four cities across Mexico (Mexico City, n=195; Guadalajara, n=100; Hermosillo, n=132; Veracruz, n=61) to study beef preferences. Images of beef steaks controlled for lean and fat colour, fat cover and marbling were presented to consumers to determine the characteristics used in beef choice and the levels of preference of these characteristics. The most important choice criteria were fat cover (62% preferring little fat cover) and marbling (59% preferring non-marbled). Lean colour was also important with 24% and 29% choosing light and dark red beef, respectively. Fat colour was the least important of the four attributes studied (18% and 19% choosing white and yellow, respectively), but was nevertheless important given that 43% of consumers used three or four characteristics to make their choice. Imported and domestic beef in the Mexican marketplace appear to respond to the range of consumers' beef preferences at the point of purchase. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  13. Irradiation of refrigerated corned beef for shelf-life extension

    International Nuclear Information System (INIS)

    Sallam, Y.I.; El-Magoli, S.B.M.; Mohamed, H.H.; El-Mongy, T.M.

    2000-01-01

    The development of the microflora of unirradiated and irradiated cowed beef was followed during storage at 5 degree. The total aerobic counts in unirradiated corned beef samples reached x 10 7 cfu/g after 10 days and after 15, 20 , 25 and 30 days of cold storage in irradiated samples at 2, 4, 6, 8 kGy, respectively, accompanied with obvious organoleptic evidence of microbial. Radiation doses up to 8 kGy and cold storage (5 degree) of cowed beef had no effect on the major constituents (moisture, protein and lipids) of these products. During storage, total volatile bases nitrogen (TVBN) and thiobarbituric acid (TBA) values tended to increase; the Ph of corned beef fall down to ca. 5. 7. Increasing the radiation dose level to 6 and 8 kGy, to increase the product shelf-life, affects generally the physical properties of the corned beef samples, and therefore, it could be concluded that the radiation dose level should be chosen to inhibit public health concern bacteria and reduce spoilage organisms, and at the same time preserve the natural properties of the food. At the present study a dose level of 4 kGy was found to be quite enough to reach such requirements for corned beef samples

  14. Shelf life of ground beef patties treated by gamma radiation.

    Science.gov (United States)

    Roberts, W T; Weese, J O

    1998-10-01

    The effects of irradiation on microbial populations in ground beef patties vacuum package and irradiated frozen at target doses of 0.0, 1.0, 3.0, 5.0, and 7.0 kGy were determined. Irradiated samples were stored at 4 or -18 degrees C for 42 days, and mesophilic aerobic plate counts (APCs) were periodically determined. Fresh ground beef (initial APC of 10(2) CFU/g) treated with 3.0, 5.0, and 7.0 kGy was acceptable ( 10(7) CFU/g) by day 14 and 21, respectively, whereas patties treated at 5.0 kGy did not spoil until 42 days. The nonirradiated control samples for both batches of ground beef spoiled within 7 days. Microbial counts in ground beef patties stored at -18 degrees C did not change over the 42-day period. Shelf life of ground beef patties stored at 4 degrees C may be extended with gamma radiation, especially at 5.0 and 7.0 kGy. Initial microbial load in ground beef samples was an important shelf life factor.

  15. Production Flexibility in Extensive Beef Farming Systems

    Directory of Open Access Journals (Sweden)

    Laura Astigarraga

    2011-03-01

    Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

  16. National Beef Market Basket Survey - 2006: External fat thickness measurements and separable component determinations for beef from US retail establishments.

    Science.gov (United States)

    Mason, C L; Nicholson, K L; Brooks, J C; Delmore, R J; Henning, W R; Johnson, D D; Lorenzen, C L; Maddock, R J; Miller, R K; Morgan, J B; Wasser, B E; Gwartney, B L; Harris, K B; Griffin, D B; Hale, D S; Savell, J W

    2009-02-01

    A market basket survey for beef retail cut composition at the retail level (four stores each from two chains in each city) was conducted in 11 US cities from January to March 2006. Beef cuts (n=17,495) were measured for external fat thickness with cuts from the chuck (0.05cm), round (0.05cm), and miscellaneous (0.04cm) having less (Pmarketing purposes.

  17. Effects of Housing Systems and the Diet Supplements on the Slaughter Value and Concentration of Mineral Elements in the Loin Muscle of Lambs

    Directory of Open Access Journals (Sweden)

    M. Gabryszuk

    2014-05-01

    Full Text Available The objective of this study was to investigate the effect of maintenance system as well as the effect of Se, Zn, and vitamin E supplementation of ram-lambs on the slaughter value and concentration of mineral elements in the loin muscle of lambs. The experiment was conducted on 72 Polish Merino ram-lambs divided into three groups: group C, indoor with no supplement, 19 lambs; S, indoor with supplement, 23 lambs; G, outdoor with no supplement, 30 lambs. From birth all the lambs were maintained indoor with their dams and then weaned at the age of 8 weeks. The rams from group C and S were placed in individual straw-bedded pens and fattened individually with concentrate mixture offered ad libitum until the age of 16 weeks. The lambs from group G were grazed every day from May to July (2 months. During the fattening period each lamb from the supplemented group S was administered per os 1 mL 0.1% Na2SeO4 (Se, 0.42 mg, 3 mL 10% ZnSO4 (Zn, 68 mg, and 1 mL premix protect vitamin E (0.1 g α-tocopherol, 5 mg lysine, 5 mg methionine daily. A comparison of half carcasses across the groups has shown no difference between the control group and the one with supplements, while the weight of half carcasses in the grazing group was smaller in comparison with groups C and S (p<0.001. The meat content in the pelvic limb showed no differences across all groups under study. The pelvic limb of grazing lambs contained less fat compared to the control and supplemented groups (p<0.001. The concentrations of Se and Zn in the blood plasma of ram-lambs from the supplemented group were significantly higher than for the control and grazing lambs. Inorganic Se and Zn supplementation with vitamin E to the diet of lambs increased Se and Zn levels in loin muscle (p<0.001 to 0.46 μg/g and 32.9 μg/g in fresh tissue, respectively.

  18. Effect of chronological age of beef steers of different maturity types ...

    African Journals Online (AJOL)

    Effect of chronological age of beef steers of different maturity types on their growth ... and carcass studies have been conducted in the sourveld regions of the country. ... different beef maturity types which differ in body frame size were used, viz.

  19. Tritium stripping by a catalytic exchange stripper

    International Nuclear Information System (INIS)

    Heung, L.K.; Gibson, G.W.; Ortman, M.S.

    1991-01-01

    A catalytic exchange process for stripping elemental tritium from gas streams has been demonstrated. The process uses a catalyzed isotopic exchange reaction between tritium in the gas phase and protium or deuterium in the solid phase on alumina. The reaction is catalyzed by platinum deposited on the alumina. The process has been tested with both tritium and deuterium. Decontamination factors (ration of inlet and outlet tritium concentrations) as high as 1000 have been achieved, depending on inlet concentration. The test results and some demonstrated applications are presented

  20. High pressure water jet cutting and stripping

    Science.gov (United States)

    Hoppe, David T.; Babai, Majid K.

    1991-01-01

    High pressure water cutting techniques have a wide range of applications to the American space effort. Hydroblasting techniques are commonly used during the refurbishment of the reusable solid rocket motors. The process can be controlled to strip a thermal protective ablator without incurring any damage to the painted surface underneath by using a variation of possible parameters. Hydroblasting is a technique which is easily automated. Automation removes personnel from the hostile environment of the high pressure water. Computer controlled robots can perform the same task in a fraction of the time that would be required by manual operation.

  1. Nonlinear optical model for strip plasmonic waveguides

    DEFF Research Database (Denmark)

    Lysenko, Oleg; Bache, Morten; Lavrinenko, Andrei

    2016-01-01

    This paper presents a theoretical model of nonlinear optical properties for strip plasmonic waveguides. The particular waveguides geometry that we investigate contains a gold core, adhesion layers, and silicon dioxide cladding. It is shown that the third-order susceptibility of the gold core...... significantly depends on the layer thickness and has the dominant contribution to the effective third-order susceptibility of the long-range plasmon polariton mode. This results in two nonlinear optical effects in plasmonic waveguides, which we experimentally observed and reported in [Opt. Lett. 41, 317 (2016...... approaches. (C) 2016 Optical Society of America...

  2. Energy Fuels Nuclear, Inc. Arizona Strip Operations

    International Nuclear Information System (INIS)

    Pool, T.C.

    1993-01-01

    Founded in 1975 by uranium pioneer, Robert W. Adams, Energy Fuels Nuclear, Inc. (EFNI) emerged as the largest US uranium mining company by the mid-1980s. Confronting the challenges of declining uranium market prices and the development of high-grade ore bodies in Australia and Canada, EFNI aggressively pursued exploration and development of breccia-pipe ore bodies in Northwestern Arizona. As a result, EFNI's production for the Arizona Strip of 18.9 million pounds U 3 O 8 over the period 1980 through 1991, maintained the company's status as a leading US uranium producer

  3. Advanced glycation end products, physico-chemical and sensory characteristics of cooked lamb loins affected by cooking method and addition of flavour precursors.

    Science.gov (United States)

    Roldan, Mar; Loebner, Jürgen; Degen, Julia; Henle, Thomas; Antequera, Teresa; Ruiz-Carrascal, Jorge

    2015-02-01

    The influence of the addition of a flavour enhancer solution (FES) (d-glucose, d-ribose, l-cysteine and thiamin) and of sous-vide cooking or roasting on moisture, cooking loss, instrumental colour, sensory characteristics and formation of Maillard reaction (MR) compounds in lamb loins was studied. FES reduced cooking loss and increased water content in sous-vide samples. FES and cooking method showed a marked effect on browning development, both on the meat surface and within. FES led to tougher and chewier texture in sous-vide cooked lamb, and enhanced flavour scores of sous-vide samples more markedly than in roasted ones. FES added meat showed higher contents of furosine; 1,2-dicarbonyl compounds and 5-hydroxymethylfurfural did not reach detectable levels. N-ε-carboxymethyllysine amounts were rather low and not influenced by the studied factors. Cooked meat seems to be a minor dietary source of MR products, regardless the presence of reducing sugars and the cooking method. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Beef Cattle Production. An Instructional Unit for Teachers of Adult Vocational Education in Agriculture.

    Science.gov (United States)

    Metzger, Bruce; Iverson, Maynard J.

    The unit on beef cattle production is designed primarily for the adult farmer program in Kentucky as an aid to making the beef enterprise more profitable. It is aimed primarily at the commercial producer. The lessons center on some of the more important economic points in beef cattle production. Ten lessons comprise the unit, which can be adapted…

  5. 9 CFR 94.27 - Importation of whole cuts of boneless beef from Japan.

    Science.gov (United States)

    2010-01-01

    ... beef from Japan. 94.27 Section 94.27 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... IMPORTATIONS § 94.27 Importation of whole cuts of boneless beef from Japan. Notwithstanding any other... slaughtered in Japan may be imported into the United States under the following conditions: (a) The beef is...

  6. 77 FR 52597 - Beef Promotion and Research; Amendment to the Order

    Science.gov (United States)

    2012-08-30

    ... experience, skills and information related to the marketing of beef and beef products, as is intended under... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1260 [Doc. No. AMS-LS-11-0086] Beef Promotion and Research; Amendment to the Order AGENCY: Agricultural Marketing Service, USDA...

  7. Effect of composting on the fate of steroids in beef cattle manure

    Science.gov (United States)

    In this study, the fate of steroid hormones in beef cattle manure composting is evaluated. The fate of 16 steroids and metabolites was evaluated in composted manure from beef cattle administered growth promotants and from beef cattle with no steroid hormone implants. The fate of estrogens (primary...

  8. prevalence of escherichia coli 0157:h7 in fresh and roasted beef

    African Journals Online (AJOL)

    DR. AMINU

    The prevalence of Enterohemorrhagic Escherichia coli 0157:H7 in 300 fresh beef and 150 roasted beef samples from ... likely cause of E. coli O157:H7 infection is undercooked ground beef. ..... coli O157:H7 in a sheep model. Appl. Environ.

  9. Apparatus for measuring profile thickness of strip material

    International Nuclear Information System (INIS)

    Hold, A.C.

    1982-01-01

    Apparatus for measuring the thickness profile of steel strip comprises a radiation source reciprocally movable in a stepwise fashion (by a belt) across the strip width on one side thereof and a single elongated detector on the other side of the strip aligned with the scanning source. This detector may be a fluorescent scintillator detector or an ionisation chamber. Means are provided for sensing the degree of excitation in the detector in synchronism with the scanning source whereby to provide an output representative of the thickness profile of the strip. (author)

  10. Stability of barotropic vortex strip on a rotating sphere

    Science.gov (United States)

    Sohn, Sung-Ik; Sakajo, Takashi; Kim, Sun-Chul

    2018-02-01

    We study the stability of a barotropic vortex strip on a rotating sphere, as a simple model of jet streams. The flow is approximated by a piecewise-continuous vorticity distribution by zonal bands of uniform vorticity. The linear stability analysis shows that the vortex strip becomes stable as the strip widens or the rotation speed increases. When the vorticity constants in the upper and the lower regions of the vortex strip have the same positive value, the inner flow region of the vortex strip becomes the most unstable. However, when the upper and the lower vorticity constants in the polar regions have different signs, a complex pattern of instability is found, depending on the wavenumber of perturbations, and interestingly, a boundary far away from the vortex strip can be unstable. We also compute the nonlinear evolution of the vortex strip on the rotating sphere and compare with the linear stability analysis. When the width of the vortex strip is small, we observe a good agreement in the growth rate of perturbation at an early time, and the eigenvector corresponding to the unstable eigenvalue coincides with the most unstable part of the flow. We demonstrate that a large structure of rolling-up vortex cores appears in the vortex strip after a long-time evolution. Furthermore, the geophysical relevance of the model to jet streams of Jupiter, Saturn and Earth is examined.

  11. Strip type radiation detector and method of making same

    International Nuclear Information System (INIS)

    Jantsch, O.; Feigt, I.; Willig, W.R.

    1976-01-01

    An improved strip detector and a method for making such a detector in which a high resistivity N conduction semiconductor body has electrode strips formed thereon by diffusion is described. The strips are formed so as to be covered by an oxide layer at the surface point of the PN junction and in which the opposite side of the semiconductor body then has a substantial amount of material etched away to form a thin semiconductor upon which strip electrodes which are perpendicular to the electrodes on the first side are then placed

  12. Stability of barotropic vortex strip on a rotating sphere.

    Science.gov (United States)

    Sohn, Sung-Ik; Sakajo, Takashi; Kim, Sun-Chul

    2018-02-01

    We study the stability of a barotropic vortex strip on a rotating sphere, as a simple model of jet streams. The flow is approximated by a piecewise-continuous vorticity distribution by zonal bands of uniform vorticity. The linear stability analysis shows that the vortex strip becomes stable as the strip widens or the rotation speed increases. When the vorticity constants in the upper and the lower regions of the vortex strip have the same positive value, the inner flow region of the vortex strip becomes the most unstable. However, when the upper and the lower vorticity constants in the polar regions have different signs, a complex pattern of instability is found, depending on the wavenumber of perturbations, and interestingly, a boundary far away from the vortex strip can be unstable. We also compute the nonlinear evolution of the vortex strip on the rotating sphere and compare with the linear stability analysis. When the width of the vortex strip is small, we observe a good agreement in the growth rate of perturbation at an early time, and the eigenvector corresponding to the unstable eigenvalue coincides with the most unstable part of the flow. We demonstrate that a large structure of rolling-up vortex cores appears in the vortex strip after a long-time evolution. Furthermore, the geophysical relevance of the model to jet streams of Jupiter, Saturn and Earth is examined.

  13. Strip defect recognition in electrical tests of silicon microstrip sensors

    Energy Technology Data Exchange (ETDEWEB)

    Valentan, Manfred, E-mail: valentan@mpp.mpg.de

    2017-02-11

    This contribution describes the measurement procedure and data analysis of AC-coupled double-sided silicon microstrip sensors with polysilicon resistor biasing. The most thorough test of a strip sensor is an electrical measurement of all strips of the sensor; the measured observables include e.g. the strip's current and the coupling capacitance. These measurements are performed to find defective strips, e.g. broken capacitors (pinholes) or implant shorts between two adjacent strips. When a strip has a defect, its observables will show a deviation from the “typical value”. To recognize and quantify certain defects, it is necessary to determine these typical values, i.e. the values the observables would have without the defect. As a novel approach, local least-median-of-squares linear fits are applied to determine these “would-be” values of the observables. A least-median-of-squares fit is robust against outliers, i.e. it ignores the observable values of defective strips. Knowing the typical values allows to recognize, distinguish and quantify a whole range of strip defects. This contribution explains how the various defects appear in the data and in which order the defects can be recognized. The method has been used to find strip defects on 30 double-sided trapezoidal microstrip sensors for the Belle II Silicon Vertex Detector, which have been measured at the Institute of High Energy Physics, Vienna (Austria).

  14. Pavement Stripping in Saudi Arabia: Prediction and Prevention

    Directory of Open Access Journals (Sweden)

    H.I. Al-Abdul Wahhab

    2004-12-01

    Full Text Available Pavement weathering or stripping is a major distress in highway networks in arid regions. Using the Saudi Arabian road network as a case study area, seventeen road test sections were selected, out of which eight were stripped and nine were non-stripped. Aggregates from quarries used to build these sections were also collected and subjected to detailed physical and chemical tests to evaluate the ability of these tests to distinguish between stripped and non-stripped sections. The modified Lottman test was used to distinguish between compacted mixes. In addition, the Swedish Rolling Bottle test, was also found to be effective in being able to distinguish between different asphalt-aggregates for stripping potential. Eleven anti-stripping liquid additives, lime and cement, in addition to two polymers, were evaluated for their ability to reduce/eliminate stripping potential of stripping-prone aggregates. It was found that EE-2 Polymer, Portland cement, and their combination were effective with all aggregate sources.

  15. Legume finishing provides beef with positive human dietary fatty acid ratios and consumer preference comparable with grain-finished beef.

    Science.gov (United States)

    Chail, A; Legako, J F; Pitcher, L R; Griggs, T C; Ward, R E; Martini, S; MacAdam, J W

    2016-05-01

    Consumer liking, proximate composition, pH, Warner-Bratzler shear force, fatty acid composition, and volatile compounds were determined from the LM (longissimus thoracis) of cattle ( = 6 per diet) finished on conventional feedlot (USUGrain), legume, and grass forage diets. Forage diets included a condensed tannin-containing perennial legume, birdsfoot trefoil (; USUBFT), and a grass, meadow brome ( Rehmann; USUGrass). Moreover, representative retail forage (USDA Certified Organic Grass-fed [OrgGrass]) and conventional beef (USDA Choice, Grain-fed; ChGrain) were investigated ( = 6 per retail type). The ChGrain had the greatest ( 0.05) to that of both USUGrain and USUGrass. Both grain-finished beef treatments were rated greater ( Consumer liking of USUBFT beef tenderness, fattiness, and overall liking were comparable ( > 0.05) with that of USUGrain and ChGrain. Flavor liking was rated greatest ( 0.05) to those of ChGrain, USUGrass, and OrgGrass. Cumulative SFA and MUFA concentrations were greatest ( 0.05) to those of USUGrain and USUGrass. Each forage-finished beef treatment, USUGrass, OrgGrass, and USUBFT, had lower ( < 0.001) ratios of -6:-3 fatty acids. Hexanal was the most numerically abundant volatile compound. The concentration of hexanal increased with increasing concentrations of total PUFA. Among all the lipid degradation products (aldehydes, alcohols, furans, carboxylic acids, and ketones) measured in this study, there was an overall trend toward greater quantities in grain-finished products, lower quantities in USUGrass and OrgGrass, and intermediate quantities in USUBFT. This trend was in agreement with IMF content, fatty acid concentrations, and sensory attributes. These results suggest an opportunity for a birdsfoot trefoil finishing program, which results in beef comparable in sensory quality with grain-finished beef but with reduced -6 and SFA, similar to grass-finished beef.

  16. Quality factors in beef, pork, and lamb cooked by microwaves.

    Science.gov (United States)

    Korschgen, B M; Baldwin, R E; Snider, S

    1976-12-01

    Three cooking treatments were applied to the longissimus muscle of beef and of pork and to deboned leg of lamb. Cooking treatments included: Intermittent energy application (3-min. cycle) with a microwave range operated at 220V and intermittent energy application (6-min. cycle) with a microwave range operated at 115V. Control roasts were cooked in a conventional gas oven (163+/-3 degrees C.). Cooking was adjusted so that roasts achieved an internal temperature of 70 degrees C. when cut for analyses. Cooking losses were significantly greater for microwave than for conventionally cooked beef. However, microwave cooking resulted in beef, pork, and lamb roasts with flavor of interior portions similar to those prepared conventionally. Flavor differences in samples from the edge of the slices of lamb and of pork and tenderness of lamb appeared to be related to cooking method. For these attributes, meat cooked conventionally was superior. In contrast, patterns in significant differences in tenderness and juiciness of beef and of pork were not consistent and were not related solely to method of cookery. Neither creatine nor creatinine was a good index of flavor of meat cooked by these methods. Aside from the time-saving aspect of microwave heating, there was no major advantage of one method of cooking over another. Thus, either high- or low- powered microwave equipment, operated at 2450 MHz, can be used satisfactorily for cooking tender cuts of beef, pork, and lamb.

  17. Industrial development of beef and pork cecina with different flavors

    Directory of Open Access Journals (Sweden)

    Francisco A. Nuñez-Gonzalez

    2013-12-01

    Full Text Available Cecina used traditional technique for salting and preserving meat as well as to impart flavor; however, addition of spices is a viable alternative to diversify the flavors of the product. The objective of this research was to develop beef and pork cecina of flavors and evaluate lipid oxidation after 30 days of storage. Beef and pork cecina were distributed independently in four treatments: Formulation 1 or base (10.7% salt, 1.3% sugar, 0.5% nitrite and seasoning 0.1%; formulation 2, base plus 10 g of mixture of coriander, celery, parsley dehydrated/kg meat; formulation 3, base plus 10 g dry mirasol chilli/kg of meat and liquid smoke (2 mL/L and formulation 4, base plus 0.80 mL of essential oregano oil/L. Beef cecina was dried at 80 °C for 150 minutes and pork cecina for 180 minutes until these achieved a water activity (aw of 0.75. Beef cecina was packaged in cellophane bag, while for pork cecina in vacuum bags. Lipid oxidation was determined using thiobarbituric acid test (TBA. The results revealed that only beef cecina presented fat rancidity.

  18. Environmental consequences of different beef production systems in the EU

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

    2010-01-01

    The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied - three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis......, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0-19.9 versus 27.3 kg CO2e, 101-173 versus 210 g SO2e, 622-1140 versus 1651 g NO3e, 16.......5-22.7 versus 42.9 m2year, and 41.3-48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the "cradle to farm gate" beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis...

  19. Monitoring the CMS strip tracker readout system

    International Nuclear Information System (INIS)

    Mersi, S; Bainbridge, R; Cripps, N; Fulcher, J; Wingham, M; Baulieu, G; Bel, S; Delaere, C; Drouhin, F; Mirabito, L; Cole, J; Giassi, A; Gross, L; Hahn, K; Nikolic, M; Tkaczyk, S

    2008-01-01

    The CMS Silicon Strip Tracker at the LHC comprises a sensitive area of approximately 200 m 2 and 10 million readout channels. Its data acquisition system is based around a custom analogue front-end chip. Both the control and the readout of the front-end electronics are performed by off-detector VME boards in the counting room, which digitise the raw event data and perform zero-suppression and formatting. The data acquisition system uses the CMS online software framework to configure, control and monitor the hardware components and steer the data acquisition. The first data analysis is performed online within the official CMS reconstruction framework, which provides many services, such as distributed analysis, access to geometry and conditions data, and a Data Quality Monitoring tool based on the online physics reconstruction. The data acquisition monitoring of the Strip Tracker uses both the data acquisition and the reconstruction software frameworks in order to provide real-time feedback to shifters on the operational state of the detector, archiving for later analysis and possibly trigger automatic recovery actions in case of errors. Here we review the proposed architecture of the monitoring system and we describe its software components, which are already in place, the various monitoring streams available, and our experiences of operating and monitoring a large-scale system

  20. Microwave assisted synthesis of hydroxyapatite nano strips

    Energy Technology Data Exchange (ETDEWEB)

    Ruban Kumar, A.; Kalainathan, S.; Saral, A.M. [School of Advanced Sciences, VIT University, Vellore 632014, Tamil Nadu (India)

    2010-07-15

    Synthesis of hydroxyapatite (HAP) nano strips was carried out by chemical precipitation method followed by microwave irradiation. The microwave assisted reactions proceed at fast rates. It is found that the presence of the complex reagent EDTA plays an important role in the morphological changes of nanostructure hydroxyapatite. EDTA acts as a hexadentate unit by wrapping itself around the Ca{sup 2+} metal ion with, four oxygen and two nitrogen atoms and forms several five member chelate rings. The relative specific surface energies associated with the facets of the crystal determines the shape of the crystal. Scanning electron microscopy revealed the presence of hydroxyapatite nano strips with the range 50-100 nm in EDTA influenced HAP powders. Fourier transform-infrared spectroscopy (FT-IR) result combined with the X-ray diffraction (XRD) indicates the presence of amorphous hydroxyapatite (HAP) in the as-prepared material. X-ray patterns collected on the powder after heat-treatment at 1100 C for 2 h in air exhibits single phase of HAP. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  1. The structure of the Cepheid instability strip

    International Nuclear Information System (INIS)

    Fernie, J.D.

    1990-01-01

    About 100 classical Cepheids having color excesses on a homogeneous system with standard errors of 0.02 or less mag are used with the Feast-Walker period-luminosity-color relation to study the distribution of such stars in the instability strip. It is found that mean (B-V)mag is a better indicator of mean effective temperature than is mean B(i) - mean V(i)(i). The blue edge of the color-magnitude distribution is consistent with the theoretical blue edge for Y = 0.28 and Z = 0.02. Although the highest amplitude stars are found near the center of the period-color array, high- and low-amplitude stars can intermingle, and both kinds are to be found near the edges of the distribution. The same is true on the C-M array. Finally, it is pointed out that the Cepheids do not populate the instability strip uniformly if the red edge is taken to be parallel to the theoretical blue edge. Rather, the local instability region runs as a parallelogram in the C-M array from the theoretical blue edge upward and to the red. 24 refs

  2. Space Weather: Where Is The Beef?

    Science.gov (United States)

    Koskinen, H. E. J.

    Space weather has become a highly fashionable topic in solar-terrestrial physics. It is perhaps the best tool to popularise the field and it has contributed significantly to the dialogue between solar, magnetospheric, and ionospheric scientist, and also to mu- tual understanding between science and engineering communities. While these are laudable achievements, it is important for the integrity of scientific space weather re- search to recognise the central open questions in the physics of space weather and the progress toward solving them. We still lack sufficient understanding of the solar physics to be able to tell in advance when and where a solar eruption will take place and whether it will turn to a geoeffective event. There is much to do to understand ac- celeration of solar energetic particles and propagation of solar mass ejecta toward the Earth. After more than 40 years of research scientific discussion of energy and plasma transfer through the magnetopause still deals mostly with qualitative issues and the rapid acceleration processes in the magnetosphere are not yet explained in a satisfac- tory way. Also the coupling to the ionosphere and from there to the strong induction effects on ground is another complex of research problems. For space weather science the beef is in the investigation of these and related topics, not in marketing half-useful space weather products to hesitant customers.

  3. Evaluation of silicon micro strip detectors with large read-out pitch

    International Nuclear Information System (INIS)

    Senyo, K.; Yamamura, K.; Tsuboyama, T.; Avrillon, S.; Asano, Y.; Bozek, A.; Natkaniec, Z.; Palka, H.; Rozanska, M.; Rybicki, K.

    1996-01-01

    For the development of the silicon micro-strip detector with the pitch of the readout strips as large as 250 μm on the ohmic side, we made samples with different structures. Charge collection was evaluated to optimize the width of implant strips, aluminum read-out strips, and/or the read-out scheme among strips. (orig.)

  4. Improvements in Iron Status and Cognitive Function in Young Women Consuming Beef or Non-Beef Lunches

    Directory of Open Access Journals (Sweden)

    Cynthia Blanton

    2013-12-01

    Full Text Available Iron status is associated with cognitive performance and intervention trials show that iron supplementation improves mental function in iron-deficient adults. However, no studies have tested the efficacy of naturally iron-rich food in this context. This investigation measured the hematologic and cognitive responses to moderate beef consumption in young women. Participants (n = 43; age 21.1 ± 0.4 years were randomly assigned to a beef or non-beef protein lunch group [3-oz (85 g, 3 times weekly] for 16 weeks. Blood was sampled at baseline, and weeks 8 and 16, and cognitive performance was measured at baseline and week 16. Body iron increased in both lunch groups (p < 0.0001, with greater improvement demonstrated in women with lower baseline body iron (p < 0.0001. Body iron had significant beneficial effects on spatial working memory and planning speed (p < 0.05, and ferritin responders (n = 17 vs. non-responders (n = 26 showed significantly greater improvements in planning speed, spatial working memory strategy, and attention (p < 0.05. Lunch group had neither significant interactions with iron status nor consistent main effects on test performance. These findings support a relationship between iron status and cognition, but do not show a particular benefit of beef over non-beef protein consumption on either measure in young women.

  5. Bill E. Kunkle Interdisciplinary Beef Symposium: Practical developments in managing animal welfare in beef cattle: what does the future hold?

    Science.gov (United States)

    Lyles, J L; Calvo-Lorenzo, M S

    2014-12-01

    Interest in the welfare of cattle in the beef industry has intensified over time because of ethical concerns and varying societal perceptions that exist about the treatment and living conditions of farm animals. The definition of welfare will vary according to an individual's philosophies (how one defines and prioritizes what is "good"), experiences (societal and cultural influences of animal roles and relationships), and involvement in the livestock industry (knowledge of how livestock operations work and why). Many welfare concerns in the beef industry could be mitigated by enhancing traditional husbandry practices that utilize practical improvements to alleviate or eliminate heat stress, pain from routine husbandry procedures, negative cattle handling, and the transitional effects of weaning, dry feeding, transportation, and comingling of calves. Recent concerns about the potential welfare effects of feeding technologies such as β-adrenergic agonists (BAA) have emerged and led to industry-wide effects, including the removal of a single BAA product from the market and the development of BAA-specific welfare audits. Altogether, the beef industry continues to be challenged by welfare issues that question a large range of practices, from traditional husbandry to newer technological advancements. As welfare awareness increases, efforts to improve livestock care and management must focus on scientific investigations, practical solutions, consumer perceptions, and educational tools that advance knowledge and training in livestock welfare. Furthermore, the future of beef cattle welfare must align welfare concerns with other aspects of sustainable beef production such as environmental quality, profitability, food safety, and nutritional quality.

  6. Factors affecting beef consumption in the valley of Mexico

    Directory of Open Access Journals (Sweden)

    Ricardo Tellez Delgado

    2015-10-01

    Full Text Available ABSTRACTThe objective of this study was to know the factors that determine the consumption of beef in the Metropolitan Area of the Valley of Mexico, using logit and probit modeling (nominal variable with 400 surveys. The results showed that significant variables that determine the probability of purchasing beef are schooling, number of members per family, meat preference, family income, and presence of disease in the individual. The largest marginal effects on the purchase decision were provided by the income and the meat preference variables, while the price was not significant. The main factors that determine the consumption of beef are schooling and the number of members in the family, while the meat preference and income are dismissed.

  7. Development of a modified dry curing process for beef.

    Science.gov (United States)

    Hayes, J E; Kenny, T A; Ward, P; Kerry, J P

    2007-11-01

    The development of a dry curing process using physical treatments to promote the diffusion of the cure ingredients was studied. Vacuum pulsing with and without tumbling, continuous vacuum, and tumbling only treatments were compared with a conventional static dry cure control method on beef M. supraspinatus. Vacuum tumble and tumble only treatments gave highest core salt content after 7 days conditioning (3.3% and 3.1%, respectively). All test treatments resulted in higher colour uniformity and lower % cook loss in comparison to control (PCured beef slices were stored in modified atmosphere packs (MAP) (80%N(2):20%CO(2)) for up to 28 day at 4°C. Redness (a(∗), Pcured beef products with enhanced organoleptic quality and increased yields.

  8. European consumers' acceptance and rejection of novel beef technologies

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Grunert, Klaus G.

    As part of ProSafeBeef, an integrated research project funded by the European Commission, the present qualitative study was carried out with European consumers to obtain insights into their acceptance or rejection of eight selected novel beef production and processing technologies, identified here...... capital cities: Madrid, Paris, Berlin and London. A common and translated topic guide was developed prior to the field work. A ranking exercise was applied, where the participants classified the technologies into accepted, neutral or rejected concepts, after discussing the perceived benefits and risks...... in society, global warming crisis, disease outbreaks and degradation of the environment are shaping consumers' opinion in regard to food production. There was a severe criticism about too much intervention in food and a strong desire to keep food and beef processing as simple and natural as possible....

  9. Inhibition of Listeria monocytogenes by Lactobacillus bavaricus MN in beef systems at refrigeration temperatures.

    OpenAIRE

    Winkowski, K; Crandall, A D; Montville, T J

    1993-01-01

    The ability of Lactobacillus bavaricus, a meat isolate, to inhibit the growth of three Listeria monocytogenes strains was examined in three beef systems: beef cubes, beef cubes in gravy, and beef cubes in gravy containing glucose. The beef was minimally heat treated, inoculated with L. bavaricus at 10(5) or 10(3) CFU/g and L. monocytogenes at 10(2) CFU/g, vacuum sealed, and stored at 4 or 10 degrees C. The meat samples were monitored for microbial growth, pH, and bacteriocin production. The p...

  10. Beef identification in industrial slaughterhouses using machine vision techniques

    Directory of Open Access Journals (Sweden)

    J. F. Velez

    2013-10-01

    Full Text Available Accurate individual animal identification provides the producers with useful information to take management decisions about an individual animal or about the complete herd. This identification task is also important to ensure the integrity of the food chain. Consequently, many consumers are turning their attention to issues of quality in animal food production methods. This work describes an implemented solution for individual beef identification, taking in the time from cattle shipment arrival at the slaughterhouse until the animals are slaughtered and cut up. Our beef identification approach is image-based and the pursued goals are the correct automatic extraction and matching between some numeric information extracted from the beef ear-tag and the corresponding one from the Bovine Identification Document (BID. The achieved correct identification results by our method are near 90%, by considering the practical working conditions of slaughterhouses (i.e. problems with dirt and bad illumination conditions. Moreover, the presence of multiple machinery in industrial slaughterhouses make it difficult the use of Radio Frequency Identification (RFID beef tags due to the high risks of interferences between RFID and the other technologies in the workplace. The solution presented is hardware/software since it includes a specialized hardware system that was also developed. Our approach considers the current EU legislation for beef traceability and it reduces the economic cost of individual beef identification with respect to RFID transponders. The system implemented has been in use satisfactorily for more than three years in one of the largest industrial slaughterhouses in Spain.

  11. Do repeated rumble strip hits improve driver alertness?

    NARCIS (Netherlands)

    Watling, C.N.; Akerstedt, T.; Kecklund, L.G.; Anund, A.

    2016-01-01

    Driving while sleepy is associated with increased crash risk. Rumble strips are designed to alert a sleepy or inattentive driver when they deviate outside their driving lane. The current study sought to examine the effects of repeated rumble strip hits on levels of physiological and subjective

  12. Metal films with imprinted nanostructures by template stripping

    DEFF Research Database (Denmark)

    Eriksen, René Lynge; Pors, Anders; Dreier, Jes

    We present a novel template stripping procedure for fabricating metal films with imprinted nanostructures. The basic idea is to deposit a gold film onto a nano-structured substrate and subsequently strip the film from the substrate surface thereby revealing imprinted nanostructures in the film...... result is a thin gold film with imprinted nano-cavities....

  13. Reforestation of strip-mined lands in West Virginia

    Science.gov (United States)

    H. Spencer Potter; Sidney Weitzman; George R., Jr. Trimble

    1951-01-01

    The early 1940's witnessed a striking increase in strip-mining throughout the eastern coal region. West Virginia, with its extensive coal resources, naturally was caught in the full current of this shift in mining methods. Today the raw gash on the hillside - almost infallibly the mark of a strip-mine operation - is a familiar sight in the State.

  14. Micro-strip sensors based on CVD diamond

    Energy Technology Data Exchange (ETDEWEB)

    Adam, W.; Berdermann, E.; Bergonzo, P.; Bertuccio, G.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D' Angelo, P.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; Mac Lynne, L.; Manfredotti, C.; Meier, D. E-mail: dirk.meier@cern.ch; Mishina, M.; Moroni, L.; Oh, A.; Pan, L.S.; Pernicka, M.; Peitz, A.; Perera, L.; Pirollo, S.; Procario, M.; Riester, J.L.; Roe, S.; Rousseau, L.; Rudge, A.; Russ, J.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Suter, B.; Tapper, R.J.; Tesarek, R.; Trischuk, W.; Tromson, D.; Vittone, E.; Walsh, A.M.; Wedenig, R.; Weilhammer, P.; Wetstein, M.; White, C.; Zeuner, W.; Zoeller, M

    2000-10-11

    In this article we present the performance of recent chemical vapour deposition (CVD) diamond micro-strip sensors in beam tests. In addition, we present the first comparison of a CVD diamond micro-strip sensor before and after proton irradiation.

  15. Micro-strip sensors based on CVD Diamond

    CERN Document Server

    Adam, W; Bergonzo, P; Bertuccio, G; Bogani, F; Borchi, E; Brambilla, A; Bruzzi, Mara; Colledani, C; Conway, J; D'Angelo, P; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fizzotti, F; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Hallewell, G D; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Koeth, T W; Krammer, Manfred; Lo Giudice, A; Lü, R; MacLynne, L; Manfredotti, C; Meier, D; Mishina, M; Moroni, L; Oh, A; Pan, L S; Pernicka, Manfred; Peitz, A; Perera, L P; Pirollo, S; Procario, M; Riester, J L; Roe, S; Rousseau, L; Rudge, A; Russ, J; Sala, S; Sampietro, M; Schnetzer, S R; Sciortino, S; Stelzer, H; Stone, R; Suter, B; Tapper, R J; Tesarek, R J; Trischuk, W; Tromson, D; Vittone, E; Walsh, A M; Wedenig, R; Weilhammer, Peter; Wetstein, M; White, C; Zeuner, W; Zoeller, M M

    2000-01-01

    In this article we present the performance of recent chemical vapour deposition (CVD) diamond micro-strip sensors in beam tests. In addition we present the first comparison of a CVD diamond micro-strip sensor before and after proton irradiation.

  16. Micro-strip sensors based on CVD diamond

    International Nuclear Information System (INIS)

    Adam, W.; Berdermann, E.; Bergonzo, P.; Bertuccio, G.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D'Angelo, P.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; Mac Lynne, L.; Manfredotti, C.; Meier, D.; Mishina, M.; Moroni, L.; Oh, A.; Pan, L.S.; Pernicka, M.; Peitz, A.; Perera, L.; Pirollo, S.; Procario, M.; Riester, J.L.; Roe, S.; Rousseau, L.; Rudge, A.; Russ, J.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Suter, B.; Tapper, R.J.; Tesarek, R.; Trischuk, W.; Tromson, D.; Vittone, E.; Walsh, A.M.; Wedenig, R.; Weilhammer, P.; Wetstein, M.; White, C.; Zeuner, W.; Zoeller, M.

    2000-01-01

    In this article we present the performance of recent chemical vapour deposition (CVD) diamond micro-strip sensors in beam tests. In addition, we present the first comparison of a CVD diamond micro-strip sensor before and after proton irradiation

  17. Micro-strip sensors based on CVD diamond

    Science.gov (United States)

    Adam, W.; Berdermann, E.; Bergonzo, P.; Bertuccio, G.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D'Angelo, P.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; van Eijk, B.; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K. K.; Gheeraert, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; mac Lynne, L.; Manfredotti, C.; Meier, D.; Mishina, M.; Moroni, L.; Oh, A.; Pan, L. S.; Pernicka, M.; Peitz, A.; Perera, L.; Pirollo, S.; Procario, M.; Riester, J. L.; Roe, S.; Rousseau, L.; Rudge, A.; Russ, J.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Suter, B.; Tapper, R. J.; Tesarek, R.; Trischuk, W.; Tromson, D.; Vittone, E.; Walsh, A. M.; Wedenig, R.; Weilhammer, P.; Wetstein, M.; White, C.; Zeuner, W.; Zoeller, M.; RD42 Collaboration

    2000-10-01

    In this article we present the performance of recent chemical vapour deposition (CVD) diamond micro-strip sensors in beam tests. In addition, we present the first comparison of a CVD diamond micro-strip sensor before and after proton irradiation.

  18. Determination of residual stresses in roll compacted titanium strips

    CSIR Research Space (South Africa)

    Mothosi, KL

    2017-01-01

    Full Text Available residual stresses using x-ray diffraction (XRD) surface probing technique. Preliminary results were obtained for the surface residual stress at the center of the titanium strips for the 100 and 325 mesh strips rolled at 0.1 roll gap for 20 and 50 mm set...

  19. Stripping foils for the PSB H- injection system

    CERN Document Server

    Aiba, M; Goddard, B; Weterings, W

    2009-01-01

    Beam physics considerations for the stripping foil of the PSB H- injection system are described, including the arguments for the foil type, thickness, geometry and positioning. The foil performance considerations are described, including expected stripping efficiency, emittance growth, energy straggling, temperature and lifetime. The required movement ranges and tolerances are detailed, together with the assumptions used.

  20. Electrode/Dielectric Strip For High-Energy-Density Capacitor

    Science.gov (United States)

    Yen, Shiao-Ping S.

    1994-01-01

    Improved unitary electrode/dielectric strip serves as winding in high-energy-density capacitor in pulsed power supply. Offers combination of qualities essential for high energy density: high permittivity of dielectric layers, thinness, and high resistance to breakdown of dielectric at high electric fields. Capacitors with strip material not impregnated with liquid.

  1. Laser stripping of relativistic H- ions with practical considerations

    International Nuclear Information System (INIS)

    Tomlin, R.

    1995-12-01

    This paper describes laser stripping of H - ions. Some applications are suggested for HEP including stripping 2GeV ions circulating in an accelerator with radius 75 meters where laser meets ion head on in a three meter interaction region. The paper describes photoionizaton cross section, laser power calculation, and how to generate the 5 micrometer light

  2. Using Comic Strips as a Book Report Alternative

    Science.gov (United States)

    Reading Teacher, 2012

    2012-01-01

    Comic strips are great to share with parents, younger students, and peers. This article presents an activity where students use a six-paneled comic strip to summarize a story. This activity allows for multiple interpretations and enhances comprehension by drawing attention to story elements.

  3. Quality Tests of Double-Sided Silicon Strip Detectors

    CERN Document Server

    Cambon, T; CERN. Geneva; Fintz, P; Guillaume, G; Jundt, F; Kuhn, C; Lutz, Jean Robert; Pagès, P; Pozdniakov, S; Rami, F; Sparavec, K; Dulinski, W; Arnold, L

    1997-01-01

    The quality of the SiO2 insulator (AC coupling between metal and implanted strips) of double-sided Silicon strip detectors has been studied by using a probe station. Some tests performed on 23 wafers are described and the results are discussed. Remark This note seems to cause problems with ghostview but it can be printed without any problem.

  4. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  5. Optical fiber cable chemical stripping fixture

    Science.gov (United States)

    Kolasinski, John R. (Inventor); Coleman, Alexander M. (Inventor)

    1995-01-01

    An elongated fixture handle member is connected to a fixture body member with both members having interconnecting longitudinal central axial bores for the passage of an optical cable therethrough. The axial bore of the fixture body member, however, terminates in a shoulder stop for the outer end of a jacket of the optical cable covering both an optical fiber and a coating therefor, with an axial bore of reduced diameter continuing from the shoulder stop forward for a predetermined desired length to the outer end of the fixture body member. A subsequent insertion of the fixture body member including the above optical fiber elements into a chemical stripping solution results in a softening of the exposed external coating thereat which permits easy removal thereof from the optical fiber while leaving a desired length coated fiber intact within the fixture body member.

  6. Dynamic underground stripping. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    Dynamic Underground Stripping (DUS) is a combination of technologies targeted to remediate soil and ground water contaminated with organic compounds. DUS is effective both above and below the water table and is especially well suited for sites with interbedded sand and clay layers. The main technologies comprising DUS are steam injection at the periphery of a contaminated area to heat permeable subsurface areas, vaporize volatile compounds bound to the soil, and drive contaminants to centrally located vacuum extraction wells; electrical heating of less permeable sediments to vaporize contaminants and drive them into the steam zone; and underground imaging such as Electrical Resistance Tomography to delineate heated areas to ensure total cleanup and process control. A full-scale demonstration was conducted on a gasoline spill site at Lawrence Livermore National Laboratory in Livermore, California from November 1992 through December 1993

  7. Digital autoradiography using silicon strip detectors

    Energy Technology Data Exchange (ETDEWEB)

    Overdick, M.

    1998-05-01

    Spatially resolving radiation detection systems operating in real time can be used to acquire autoradiographic images. An overview over alternatives to traditional autoradiography is given and the special features of these filmless methods are discussed. On this basis the design of a system for digital autoradiography using silicon strip detectors is presented. Special emphasis is put on the physical background of the detection process in the semiconductor and on the self-triggering read-out technique. The practical performance of the system is analyzed with respect to energy and spatial resolution. This analysis is complemented by case studies from cell biology (especially electrophoresis), botany and mineralogy. Also the results from a time-resolved autoradiographic experiment are presented. (orig.) 80 refs.

  8. Coplanar strips for Josephson voltage standard circuits

    International Nuclear Information System (INIS)

    Schubert, M.; May, T.; Wende, G.; Fritzsch, L.; Meyer, H.-G.

    2001-01-01

    We present a microwave circuit for Josephson voltage standards. Here, the Josephson junctions are integrated in a microwave transmission line designed as coplanar strips (CPS). The new layout offers the possibility of achieving a higher scale of integration and to considerably simplify the fabrication technology. The characteristic impedance of the CPS is about 50 Ω, and this should be of interest for programmable Josephson voltage standard circuits with SNS or SINIS junctions. To demonstrate the function of the microwave circuit design, conventional 10 V Josephson voltage standard circuits with 17000 Nb/AlO x /Nb junctions were prepared and tested. Stable Shapiro steps at the 10 V level were generated. Furthermore, arrays of 1400 SINIS junctions in this microwave layout exhibited first-order Shapiro steps. Copyright 2001 American Institute of Physics

  9. Silicon strip detectors for the ATLAS upgrade

    CERN Document Server

    Gonzalez Sevilla, S; The ATLAS collaboration

    2011-01-01

    The Large Hadron Collider at CERN will extend its current physics program by increasing the peak luminosity by one order of magnitude. For ATLAS, one of the two general-purpose experiments of the LHC, an upgrade scenario will imply the complete replacement of its internal tracker due to the harsh conditions in terms of particle rates and radiation doses. New radiation-hard prototype n-in-p silicon sensors have been produced for the short-strip region of the future ATLAS tracker. The sensors have been irradiated up to the fluences expected in the high-luminous LHC collider. This paper summarizes recent results on the performance of the irradiated n-in-p detectors.

  10. The effect of technology information on consumer expectations and liking of beef

    DEFF Research Database (Denmark)

    van Wezemael, Lynn; Ueland, Øydis; Rødbotten, Rune

    2012-01-01

    European consumers increasingly attach value to process characteristics of food. Although beef technologies are hardly communicated to consumers, providing consumer-oriented information about technology application might increase perceived transparency and consumer acceptance. This study...... investigates how information about beef technologies influences consumer expectations and liking of beef. Beef consumers in Belgium (n=108) and Norway (n=110) participated in an information experiment combined with sensory testing in which each consumer tasted three beef muscles treated with different...... technologies: unprocessed tenderloin M. Psoas major, muscle profiled M. Infraspinatus, and marinated (by injection) M. Semitendinosus. The findings indicate that detailed information about beef technologies can enhance consumers' expectations and liking of beef. However, this effect differs between countries...

  11. Relationships between sensory evaluations of beef tenderness, shear force measurements and consumer characteristics.

    Science.gov (United States)

    Van Wezemael, Lynn; De Smet, Stefaan; Ueland, Øydis; Verbeke, Wim

    2014-07-01

    The supply of tender beef is an important challenge for the beef industry. Knowledge about the profile of consumers who are more optimistic or more accurate in their tenderness evaluations is important for product development and beef marketing purposes. Central location tests of beef steaks were performed in Norway and Belgium (n=218). Instrumental and sensorial tenderness of three muscles from Belgian Blue and Norwegian Red cattle was reported. Consumers who are optimistically evaluating tenderness were found to be more often male, less food neophobic, more positive towards beef healthiness, and showed fewer concerns about beef safety. No clear profile emerged for consumers who assessed tenderness similar to shear force measurements, which suggests that tenderness is mainly evaluated subjectively. The results imply a window of opportunities in tenderness improvements, and allow targeting a market segment which is less critical towards beef tenderness. © 2013 Elsevier Ltd. All rights reserved.

  12. Strip specimen tests for pipeline materials and girth welds

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, William C. [Edison Welding Institute (EWI), Columbus, Ohio (United States)

    2009-07-01

    Strip specimen testing of pipeline materials has been widely applied as a method of getting data relevant to the performance of pipelines under axial direction loading. Comparisons of strip specimen against smaller standard tests (round tensile bar, fracture toughness specimens, polished round bars) and against full-scale or large-scale testing will be explored. Data from early-generation pipe welds from the 1920's to the 1940's to the most recent materials for offshore reeled pipe will be used for examples. Strip samples can provide full thickness information to take account of varying material properties or imperfection distribution through the thickness. Strip samples can also accommodate measurement of effects of the original surface finish or weld surface shape. Strip samples have more design flexibility than standard tests, but must be designed to limit stress concentrations and effects of local bending. (author)

  13. Eddy current distribution and lift force for finite MAGLEV strips

    Energy Technology Data Exchange (ETDEWEB)

    Atherton, D L; Eastham, A R; Fombrun, C; Chong, M

    1974-07-01

    The transverse distribution of induced eddy currents across a flat conducing strip of finite width, due to a rectangular dc magnet moving above it, was modelled experimentally, and was compared with that calculated for an infinite sheet. The electrodynamic suspension was simulated by means of a stationary ac-excited copper magnet suspended above an aluminum strip, and the induced surface current density was measured by a voltage pickup probe connected to a lock-in amplifier. The effect of reducing strip width is examined and shown to produce high current densities close to the edges. These results are related to the variation of lift force with strip width, determined by impedance modelling. A slight enhancement of lift is evident for intermediate strip widths.

  14. Evaluation of anatomy comic strips for further production and applications

    Science.gov (United States)

    Shin, Dong Sun; Kim, Dae Hyun; Park, Jin Seo; Jang, Hae Gwon

    2013-01-01

    The corresponding author of the study has been sketching comic strips to explain anatomy in a humorous manner. All the anatomy comic strips, including those in Korean (650 episodes) and English (451 episodes), can be viewed on the homepage (http://anatomy.co.kr). Such comic strips were created with the aim of assisting medical students. However, their impact was unknown, and therefore, we surveyed the students' responses. We noted that anatomy grades were better in the students who read the comic strips. The comics helped the trainees chat with individuals with and without a medical background. The authors also considered comments on the problems with the comic strips and attempted to find solutions. The episodes are being currently used and further produced for educational purposes. To support this effort, the readers' valuable opinions will be continuously collected and assessed. PMID:24179697

  15. Evaluation of anatomy comic strips for further production and applications.

    Science.gov (United States)

    Shin, Dong Sun; Kim, Dae Hyun; Park, Jin Seo; Jang, Hae Gwon; Chung, Min Suk

    2013-09-01

    The corresponding author of the study has been sketching comic strips to explain anatomy in a humorous manner. All the anatomy comic strips, including those in Korean (650 episodes) and English (451 episodes), can be viewed on the homepage (http://anatomy.co.kr). Such comic strips were created with the aim of assisting medical students. However, their impact was unknown, and therefore, we surveyed the students' responses. We noted that anatomy grades were better in the students who read the comic strips. The comics helped the trainees chat with individuals with and without a medical background. The authors also considered comments on the problems with the comic strips and attempted to find solutions. The episodes are being currently used and further produced for educational purposes. To support this effort, the readers' valuable opinions will be continuously collected and assessed.

  16. Genome Wide Association Studies (GWAS Identify QTL on SSC2 and SSC17 Affecting Loin Peak Shear Force in Crossbred Commercial Pigs.

    Directory of Open Access Journals (Sweden)

    Chunyan Zhang

    Full Text Available Of all the meat quality traits, tenderness is considered the most important with regard to eating quality and market value. In this study we have utilised genome wide association studies (GWAS for peak shear force (PSF of loin muscle as a measure of tenderness for 1,976 crossbred commercial pigs, genotyped for 42,721 informative SNPs using the Illumina PorcineSNP60 Beadchip. Four 1 Mb genomic regions, three on SSC2 (at 4 Mb, 5 Mb and 109 Mb and one on SSC17 (at 20 Mb, were detected which collectively explained about 15.30% and 3.07% of the total genetic and phenotypic variance for PSF respectively. Markers ASGA0008566, ASGA0008695, DRGA0003285 and ASGA0075615 in the four regions were strongly associated with the effects. Analysis of the reference genome sequence in the region with the most important SNPs for SSC2_5 identified FRMD8, SLC25A45 and LTBP3 as potential candidate genes for meat tenderness on the basis of functional annotation of these genes. The region SSC2_109 was close to a previously reported candidate gene CAST; however, the very weak LD between DRGA0003285 (the best marker representing region SSC2_109 and CAST indicated the potential for additional genes which are distinct from, or interact with, CAST to affect meat tenderness. Limited information of known genes in regions SSC2_109 and SSC17_20 restricts further analysis. Re-sequencing of these regions for informative animals may help to resolve the molecular architecture and identify new candidate genes and causative mutations affecting this trait. These findings contribute significantly to our knowledge of the genomic regions affecting pork shear force and will potentially lead to new insights into the molecular mechanisms regulating meat tenderness.

  17. Identification and quantification of flavor attributes present in chicken, lamb, pork, beef, and turkey.

    Science.gov (United States)

    Maughan, Curtis; Martini, Silvana

    2012-02-01

    The objectives of this study were to use a meat flavor lexicon to identify and quantify flavor differences among different types of meats such as beef, chicken, lamb, pork, and turkey, and to identify and quantify specific flavor attributes associated with "beef flavor" notes. A trained descriptive panel with 11 participants used a previously developed meat lexicon composed of 18 terms to evaluate the flavor of beef, chicken, pork, turkey, and lamb samples. Results show that beef and lamb samples can be described by flavor attributes such as barny, bitter, gamey, grassy, livery, metallic, and roast beef. Inversely related to these samples were pork and turkey and those attributes that were closely related to them, namely brothy, fatty, salty, sweet, and umami. Chicken was not strongly related to the other types of meats or the attributes used. The descriptive panel also evaluated samples of ground beef mixed with chicken to identify and quantify flavor attributes associated with a "beef flavor." Meat patties for this portion consisted of ground beef mixed with ground chicken in varying amounts: 0%, 25%, 50%, 75%, and 100% beef, with the remainder made up of chicken. Beef and beef-rich patties (75% beef) were more closely related to flavor attributes such as astringent, bloody, fatty, gamey, metallic, livery, oxidized, grassy, and roast beef, while chicken was more closely associated with brothy, juicy, sour, sweet, and umami. This research provides information regarding the specific flavor attributes that differentiate chicken and beef products and provides the first set of descriptors that can be associated with "beefy" notes. POTENTIAL APPLICATION: The use of a standardized flavor lexicon will allow meat producers to identify specific flavors present in their products. The impact is to identify and quantify negative and positive flavors in the product with the ultimate goal of optimizing processing or cooking conditions and improve the quality of meat products.

  18. Study of inter-strip gap effects and efficiency for full energy detection of double sided silicon strip detectors

    International Nuclear Information System (INIS)

    Fisichella, M.; Forneris, J.; Grassi, L.

    2015-01-01

    We performed a characterization of Double Sided Silicon Strip Detectors (DSSSD) with the aim to carry out a systematic study of the inter-strip effects on the energy measurement of charged particles. The dependence of the DSSSD response on ion, energy and applied bias has been investigated. (author)

  19. Microstructural research on hot strips of low carbon steel produced by a compact strip production line under different thermal histories

    International Nuclear Information System (INIS)

    Yu Hao; Chen Qixiang; Kang Yonglin; Sun Yi

    2005-01-01

    Coupons with the same composition and thickness (4.0 mm nominal gauge) obtained from hot strips of low carbon steel underwent a series of investigations to analyze the microstructural characteristics and mechanisms responsible for their differences in mechanical properties. Two different industrial technologies were adopted, although the strips used in this research were produced on the same Compact Strip Production (CSP) line. One of the strips was produced with a routine γ→α CSP thermal history, but the other with a γ→α→γ* conventional thermal history. The only difference between them was that one technology had a α→γ* thermal history. Different specimens of both types of strips were prepared for metallographic observation, tensile tests, electron back-scattered diffraction tests and positron annihilation technique tests. Experimental results showed that the differences in mechanical properties could be ascribed to dissimilarities not only in the grain size and textural components but also in dislocation density

  20. New Concept of Cultivation Using Limited Strip-Tillage with Strip Shallow Irrigation

    Directory of Open Access Journals (Sweden)

    Yazid Ismi Intara

    2014-04-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE Dry land is one of land resources which potentially used for food crop cultivation, especially in the areas which have light to medium technical obstacles. The development of technology to improve soil quality in marginal lands to be productive lands is still widely open for agricultural development in Indonesia. Rooting medium quality can be improved by changing soil tillage method and observing the proper crop irrigation technology. It can be the solution for crop cultivation in clay loam soil. This study aimed to obtain water movement model in a minimally-tilled clay soil with strip shallow irrigation. The concept is limited soil-tillage with strip shallow irrigation method, water supply technique, and crop water requirement. Method used in this study includes developing water movement model (software development in a minimally-tilled clay soil with subsurface irrigation. In the final stages, research also conducted water movement analysis testing apparatus in the laboratory, field validation of the subsurface irrigation performance, and cultivation technique testing to chili pepper growth (Capsicum annuumL.. The development of water movement simulation on a limited strip-tillage with subsurface irrigation uses the concept to quantify the amount of water in the soil. The analysis of movement pattern was demonstrated on contour patterns. It showed that the wetting process can reach depth zone – 5 cm to the rooting zone. It was an important discovery on the development of minimum stripe tillage soil with subsurface irrigation. Specifically, it can be concluded that: the result of fitting by eyes to diffusivity graphic and water content obtained the required parameter values for soil physical properties. It was then simulated on horizontal water movement model on a minimum strip-tillage with strip shallow irrigation /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso

  1. Improvement of beef cattle genetics provided increasing sustainability of beef cattle production and protein consumption in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Boonyanuwat, K. [Beef Cattle Research and Development Group, Division of Animal Husbandry, Department of Livestock Development, Bangkok (Thailand)], E-mail: kalayabo@yahoo.com; Sirisom, P [Tak Livestock Breeding and Research Center, Meung (Thailand); Putharatanung, A [Nongkwang Livestock Research and Breeding Center, Photharam (Thailand)

    2009-07-01

    The rural innovation research and development (R and D) in beef cattle genetics, biotechnology, climate science and production systems, supported profitable and sustainable beef cattle production in Thailand. Department of Livestock Development (DLD) undertakes R and D to achieve continuous improvement in genetics, production technologies to improve productivity, profitability and sustainability of beef cattle production and quality of products. Efficiencies were achieved through improvements in genetics, nutrition and grazing management, use of information, meat science, and reduction in ruminant methane production. This function was essential to maintain long-term production competitiveness and achieve sustained economic growth in rural Thailand, where the beef cattle production was the important livestock production, accounting for 36.99% of the value of livestock production in Thailand. Molecular, quantitative genetics, and biotechnology tool were being combined in the development of genetic improvement. In 2006, beef meat was imported 1,842.53 thousand tons (0.41% of all consumption, 120.84 baht/kg). For the big size cattle, such as Tak cattle, Kabinburi cattle (Thai synthetic breeds by DLD, Tak = 62.5 Charoles-Brahman, Kabinburi = 50 Simental- Brahman), and cross breed cattle, they were in fattening period for 6-12 month. Fattening group, they were raised for restaurant, hotel, super market, and steak house. Data were collected from 2 parts: 1) 354 cattle of experimental trial in DLD part, and 2) 492 fattening cattle of small holders in Tak province and Nakorn Pathom province during October 2004-September 2007. Data collecting was separated into 2 parts (performance data and reference). Data were adjusted by group location month and year to analyze for growth, carcass performance and economic performances). There were 5 breeds of fattening beef cattle: 1) Thai Native, 2) Thai Brahman, 3) Kabinburi, 4) Tak, and 5) Tajima-Native. The first group was around 41

  2. Safety of street vended meat products - chicken and beef suya ...

    African Journals Online (AJOL)

    leftover, heated, spiced and roasted suya of the following day, were collected from three locations in Ibadan metropolis, to identify the specific microorganisms in street vended chicken and beef suya and measure the microbial count at each stage of handling from the raw state to marketing and consumption. The plate count ...

  3. Differentiation of pork from beef, chicken, mutton and chevon ...

    African Journals Online (AJOL)

    The detection of pork in various food products has been an important subject of study in many countries. The current study was aimed to differentiate pork from selected meats of beef, mutton, chevon and chicken based on their primary amino acid contents using reverse phase-high performance liquid chromatography ...

  4. Beef Production on Rotationally Grazed F1 Pennisetum Hybrid and ...

    African Journals Online (AJOL)

    Comparative studies of elephant grass and the F1 hybrids between the 'maiwa' cultivar of millet (Pennisetum americanum) and elephant grass (P. purpureum) indicated a superiority in quality of the hybrids. To ascertain this potential superiority animal performance was measured by estimating beef production on F1 ...

  5. Shelf life extension of ground beef by radurization

    International Nuclear Information System (INIS)

    Holzapfel, W.H.; Niemand, J.G.

    1982-01-01

    Radurization was investigated as a technique in the shelf life extension of ground beef. Although radurization does not necessarily kill off all meat spoilage bacteria, this process may be used for extending the bacteriological keeping quality of fresh meat. The materials and methods used in the investigation are also discussed

  6. Management characteristics of beef cattle production in Hawaii

    Science.gov (United States)

    A comprehensive life cycle assessment of the United States’ beef value chain requires the collection of region-specific data for accurate characterization of the country’s diverse production practices. Cattle production in Hawaii is very different from the rest of the country due to its unique ecosy...

  7. Modeling growth from weaning to maturity in beef cattle breeds

    Science.gov (United States)

    To better understand growth trajectory and maturity differences between beef breeds, three models – Brody, spline, and quadratic – were fit to cow growth data, and resulting parameter estimates were evaluated for 3 breed categories – British, continental, and Brahman-influenced. The data were weight...

  8. Increase in. gamma. -radiation from powdered milk and beef

    Energy Technology Data Exchange (ETDEWEB)

    Sievert, R M; Gustafsson, S; Sylander, C G

    1956-01-01

    Samples of powdered milk and beef preserved during the years 1953 to 1956 were examined for the presence of ..gamma..-radiation. The higher ..gamma..-radiation found in the last year was attributed to an increase in fission products. Data are compared with measurements on a series of children.

  9. 76 FR 42012 - Beef Promotion and Research; Reapportionment

    Science.gov (United States)

    2011-07-18

    ... Agricultural Marketing Service (AMS) has considered the economic effect of this action on small entities and..., methods of production and distribution, marketing strategies, and other distinguishing factors that will... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service 7 CFR Part 1260 [No. AMS-LS-10-0086] Beef...

  10. Crossbreeding to increase beef production: additive and non ...

    African Journals Online (AJOL)

    GScholtz

    2013-06-06

    Jun 6, 2013 ... Crossbreeding to increase beef production: additive and non-additive effects on weight traits ... total weight of weaned calves. ... Weight traits are not all equally important to efficiency ... values to model total herd productivity. ..... The maintenance requirement of a cow is affected by her weight: the larger the.

  11. Population structure and genetic trends for indigenous African beef ...

    African Journals Online (AJOL)

    The aim of this study was to investigate population structure and genetic trends based on pedigree and performance records of five indigenous African beef cattle breeds (Afrikaner, Boran, Drakensberger, Nguni and Tuli) in South Africa. Pedigree completeness over six generations was higher than 88.5% in the first ...

  12. Characterization of radiation-resistant vegetative bacteria in beef

    International Nuclear Information System (INIS)

    Welch, A.B.; Maxcy, R.B.

    1975-01-01

    Ground beef contains numerous microorganisms of various types. The commonly recognized bacteria are associated with current problems of spoilage. Irradiation, however, contributes a new factor through selective destruction of the microflora. The residual microorganisms surviving a nonsterilizing dose are predominantly gram-negative coccobacilli. Various classifications have been given, e.g., Moraxella, Acinetobacter, Achromobacter, etc. For a more detailed study of these radiation-resistant bacteria occurring in ground beef, an enrichment procedure was used for isolation. By means of morphological and biochemical tests, most of the isolates were found to be Moraxella, based on current classifications. The range of growth temperatures was from 2 to 50 C. These bacteria were relatively heat sensitive, e.g., D 10 of 5.4 min at 70 0 C or less. The radiation resistance ranged from D 10 values of 273 to 2,039 krad. Thus, some were more resistant than any presently recognized spores. A reference culture of Moraxella osloensis was irradiated under conditions comparable to the enrichment procedure used with the ground beef. The only apparent changes were in morphology and penicillin sensitivity. However, after a few subcultures these bacteria reverted to the characteristics of the parent strain. Thus, it is apparent that these isolates are a part of the normal flora of ground beef and not aberrant forms arising from the irradiation procedure. The significance, if any, of these bacteria is not presently recognized. (auth)

  13. Determinants and opportunities for commercial marketing of beef ...

    African Journals Online (AJOL)

    The objective of this study was to examine the factors influencing smallholder producers' potential to sell cattle and identify marketing opportunities for sustainable beef production in South Africa. A total of 95 structured questionnaires was administered to the Ncorha and Gxwalibomvu communities in the Eastern Cape ...

  14. Bacteriological Quality of Dried Sliced Beef (Kilishi) Sold In Ilorin ...

    African Journals Online (AJOL)

    DR. MIKE HORSFALL

    ABSTRACT: The bacteriological quality of dried sliced beef (kilishi) obtained from three selling points in. Ilorin metropolis was determined in order to ascertain its safety. The total bacterial count, Enterobacteriaceae count, Staphylococcus aureus count and E.coli counts were used as index of bacteriological quality. Samples.

  15. Potential use of gas sensors in beef manure nutrient content ...

    African Journals Online (AJOL)

    The purpose of this study was to develop a gas sensor array to estimate the manure nutrient contents. Three metal-oxide gas sensors including methane, ammonia and hydrogen sulfide were used. Forty manure samples were collected from four beef operations in Southwest North Dakota. Manure samples were sent to be ...

  16. Sustainable crossbreeding systems of beef cattle in the era of ...

    African Journals Online (AJOL)

    An effective way to reduce the carbon footprint from beef cattle would be to reduce the numbers and increase the production per animal, thereby improving their productivity. Sustainable crossbreeding systems can be an effective way to reduce GHG, as it has been shown to increase production. There are a wide range of ...

  17. Selection for beef traits and calving performance in Piemontese cattle

    NARCIS (Netherlands)

    Albera, A.

    2006-01-01

    Beef cattle selection programmes are usually focused on the improvement of production traits. However, also functional traits play an important role for the efficiency of animal production. Among these traits calving performance, affecting stillbirth of calves, fertility of cows, animal welfare and

  18. Towards a regional beef carcass classification system for Southern ...

    African Journals Online (AJOL)

    This is partly because the current beef carcass grading and classification systems used in the region value inappropriately carcasses from slow-maturing indigenous cattle breeds that are ideally suited to being marketed off natural pasture. The existing systems use carcass yield and quality attributes, but do not predict ...

  19. Quality related principles of the South African beef classification ...

    African Journals Online (AJOL)

    This paper addresses the principles related to different grading and classification systems of the world with specific focus on beef quality related outcomes. The paper uses the definitions that classification is a set of descriptive terms describing features of the carcass that are useful as guidelines to those involved in the ...

  20. Comparative analysis of beef and fish consumption in Ekwusigo ...

    African Journals Online (AJOL)

    The study isolated and discussed the factors driving beef and fish consumption in Ekwusigo Local Government Area (L.G.A.) of Anambra State, Nigeria. Cross sectional data generated from 120 households randomly selected from five villages in Ekwusigo L.G.A was used. Descriptive statistics and regression analysis was ...

  1. Physiology and Endocrinology Symposium. Factors controlling puberty in beef heifers

    Science.gov (United States)

    The Physiology and Endocrinology Symposium on “Factors controlling puberty in beef heifers” was held at the joint annual meeting of the American Dairy Science Association and the American Society of Animal Science in New Orleans, Louisiana, USA, July 10 to 14, 2011. The objective of the symposium w...

  2. A survey of grass-finished beef producers in Pennsylvania

    Science.gov (United States)

    To meet our goal of quantifying the environmental impacts of grass-finished beef production, data on production practices in Pennsylvania were collected at the farm level via visits and online surveys. Twenty-three responses represented a total of 1,055 animals on 2,155 acres of land. Farms were rel...

  3. In Vitro Iron Availability from Insects and Sirloin Beef.

    Science.gov (United States)

    Latunde-Dada, Gladys O; Yang, Wenge; Vera Aviles, Mayra

    2016-11-09

    Interest in the consumption of insects (entomophagy) as an alternative environmentally sustainable source of protein in the diet of humans has recently witnessed a surge. Knowledge of the nutrient composition and, in particular, the bioavailability of minerals from insects is currently sparse. This study evaluated the availability of Fe, Ca, Cu, Mg, Mn, and Zn from four commonly eaten insects and compared these to sirloin beef. Soluble iron from the samples was measured by inductively coupled plasma optical emission spectrometry (ICP-OES). Iron bioavailability was determined using an in vitro simulated peptic-pancreatic digestion, followed by measurement of ferritin (a surrogate marker for iron absorption) in Caco-2 cells. Cricket and sirloin beef had comparably higher levels of Fe, Ca, and Mn than grasshopper, meal, and buffalo worms. However, iron solubility was significantly higher from the insect samples than from beef. The complementation of whole-wheat flour with insect or beef protein resulted in overall decreases in mineral content and iron solubility in the composite mixtures. Collectively, the data show that grasshopper, cricket, and mealworms contain significantly higher chemically available Ca, Cu, Mg, Mn, and Zn than sirloin. However, buffalo worms and sirloin exhibited higher iron bioavailability comparable to that of FeSO 4 . Commonly consumed insect species could be excellent sources of bioavailable iron and could provide the platform for an alternative strategy for increased mineral intake in the diets of humans.

  4. Crossbreeding to increase beef production: Additive and non ...

    African Journals Online (AJOL)

    Fitness is of paramount importance to efficient and profitable beef production. Thus, the objective of this study was to estimate genetic components of fitness traits measured in Afrikaner (A), Brahman (B), Charolais (C), Hereford (H) and Simmentaler (S). For this study, the fitness traits recorded were percentage of cows ...

  5. Characterization of beef cattle breeds by virtue of their performances ...

    African Journals Online (AJOL)

    young bulls of l6 breeds were obtained fiorn the National Beef Cattle Performance and Progeny Testing Scheme and used in this re-analysis to characterize ... breeds for their effective use in either straight breeding or cross- breeding programmes. ... Scheme as the only data source for breed characterization pur- poses.

  6. Potential use of gas sensors in beef manure nutrient content ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-06-17

    Jun 17, 2009 ... manure samples were collected from four beef operations in Southwest North Dakota. Manure samples were sent to be ... cation rate at spreading time instead of waiting two or three weeks to receive the results ... Operation mechanism of metal-oxide gas sensors. The sensors used in this study were ...

  7. Evaluation of hair cortisol in beef cattle of divergent temperaments

    Science.gov (United States)

    The objective of this research project was to evaluate the relationships among hair and serum cortisol concentrations and cattle disposition. Spring born (n = 101) crossbred beef heifers (7 to 8 mo. of age) were evaluated for temperament preweaning and at weaning by pen score (PS; 1 = calm and 5 = e...

  8. Supplementary winter feeding and reproduction of beef heifers on ...

    African Journals Online (AJOL)

    Supplementary winter feeding and reproduction of beef heifers on Dohne sourveld. JA Erasmus, HH Barnard. Abstract. No Abstract. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for ...

  9. 76 FR 18422 - Beef Promotion and Research; Reapportionment

    Science.gov (United States)

    2011-04-04

    ... in cattle inventories and cattle and beef imports that have occurred since the most recent Board... Farms, and Livestock Operations,'' USDA's National Agricultural Statistics Service (NASS) estimates that in 2009 the number of operations in the United States with cattle totaled approximately 950,000. The...

  10. Effect of winter nutritional levels on subsequent growth of beef ...

    African Journals Online (AJOL)

    Effect of winter nutritional levels on subsequent growth of beef heifers in the Highland Sourveld of Natal. ... Teen 'n lae veebelading van 0,75 GVE/ha (vir die weiperiode) op somerveld, het verse betekenisvol (P < 0,01) meer in massa toegeneem vergeleke met 'n hoë veebelading (1,25 GVE/ha). Binne elk van die ...

  11. Membrane air stripping utilizing a plate and frame configuration

    International Nuclear Information System (INIS)

    Boswell, S.T.

    1991-01-01

    Membrane air stripping has recently been proposed as a possible method to remove volatile organic chemicals (VOCs) and radon from drinking water supplies. Current and anticipated regulatory requirements, driven by health consequences, make the removal of these contaminants mandatory. This work examines the use of plate and frame membrane air stripping for the removal of VOCs and radon from a water supply. The theoretical basis of membrane air stripping and a literature review are included. The advantages of membrane air stripping versus other methods of removal, as well as the advantages of a plate and frame configuration versus a hollow fiber configuration for membrane air stripping are discussed. Multiple regression/correlation techniques are used to model mass transfer coefficients and fluid resistances. An economic evaluation is performed using the developed models. The costs of comparable membrane and packed tower air stripping systems are 4.86 cents per thousand gallons versus 4.36 cents per thousand gallons, respectively. This work indicates that plate and frame membrane air stripping may, in fact, prove to be an economical alternative to packed tower aeration and carbon adsorption for the removal of VOCs and radon

  12. Classification and characterization of Japanese consumers' beef preferences by external preference mapping.

    Science.gov (United States)

    Sasaki, Keisuke; Ooi, Motoki; Nagura, Naoto; Motoyama, Michiyo; Narita, Takumi; Oe, Mika; Nakajima, Ikuyo; Hagi, Tatsuro; Ojima, Koichi; Kobayashi, Miho; Nomura, Masaru; Muroya, Susumu; Hayashi, Takeshi; Akama, Kyoko; Fujikawa, Akira; Hokiyama, Hironao; Kobayashi, Kuniyuki; Nishimura, Takanori

    2017-08-01

    Over the past few decades, beef producers in Japan have improved marbling in their beef products. It was recently reported that marbling is not well correlated with palatability as rated by Japanese consumers. This study sought to identify the consumer segments in Japan that prefer sensory characteristics of beef other than high marbling. Three Wagyu beef, one Holstein beef and two lean imported beef longissimus samples were subjected to a descriptive sensory test, physicochemical analysis and a consumer (n = 307) preference test. According to consumer classification and external preference mapping, four consumer segments were identified as 'gradual high-fat likers', 'moderate-fat and distinctive taste likers', 'Wagyu likers' and 'distinctive texture likers'. Although the major trend of Japanese consumers' beef preference was 'marbling liking', 16.9% of the consumers preferred beef samples that had moderate marbling and distinctive taste. The consumers' attitudes expressed in a questionnaire survey were in good agreement with the preference for marbling among the 'moderate-fat and distinctive taste likers'. These results indicate that moderately marbled beef is a potent category in the Japanese beef market. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  13. THz Wave Propagation on Strip Lines: Devices, Properties, and Applications

    Directory of Open Access Journals (Sweden)

    Y. Kadoya

    2008-06-01

    Full Text Available We report the propagation characteristics of THz pulses on micro-strip-lines and coplanar strip-lines, in which low permittivity polymer materials are used as the dielectric layer or the substrate. As a result of the low attenuation and small dispersion in the devices, the spectral width up to 3 THz can be achieved even after the 1 mm propagation. Spectroscopic characterizations of liquid or powder specimens are demonstrated using the devices. We also show a possibility of realizing a very low attenuation using a quadrupole mode in three strip coplanar lines on the polymer substrate.

  14. Improved dielectric functions in metallic films obtained via template stripping

    Science.gov (United States)

    Hyuk Park, Jong; Nagpal, Prashant; Oh, Sang-Hyun; Norris, David J.

    2012-02-01

    We compare the dielectric functions of silver interfaces obtained via thermal evaporation with those obtained with template stripping. Ellipsometry measurements show that the smoother template-stripped surfaces exhibit effective dielectric functions with a more negative real component and a smaller imaginary component, implying higher conductivity and less energy loss, respectively. These results agree with the relation between dielectric function and surface roughness derived from combining the effective-medium model and the Drude-Lorentz model. The improvement in the effective dielectric properties shows that metallic films prepared via template stripping can be favorable for applications in electronics, nanophotonics, and plasmonics.

  15. New technology for the production of magnesium strips and sheets

    Directory of Open Access Journals (Sweden)

    R. Kawalla

    2008-07-01

    Full Text Available A new production technology for magnesium strip, based on twin-roll-casting and strip rolling was developed in Freiberg Germany. By means of this economic method it is possible to produce strips in deep drawing quality with good forming properties in order to satisfy the request for low cost Mg sheets in the automotive and electronic industry. Both, coils as single sheets, were manufactured and rolled to a thickness of 1mm(0,5 mm. The technology of the new process and the properties of the twin-roll-casted material and the final sheets are presented.

  16. Effect of packaging and storage time on survival of Listeria monocytogenes on kippered beef steak and turkey tenders.

    Science.gov (United States)

    Uppal, Kamaldeep K; Getty, Kelly J K; Boyle, Elizabeth A E; Harper, Nigel M; Lobaton-Sulabo, April Shayne S; Barry, Bruce

    2012-01-01

    The objective of our study was to determine effect of packaging method and storage time on reducing Listeria monocytogenes in shelf-stable meat snacks. Commercially available kippered beef steak strips and turkey tenders were dipped into a 5-strain L. monocytogenes cocktail, and dried at 23 °C until a water activity of 0.80 was achieved. Inoculated samples were packaged with 4 treatments: (1) vacuum, (2) nitrogen flushed with oxygen scavenger, (3) heat sealed with oxygen scavenger, and (4) heat sealed without oxygen scavenger. Samples were stored at 23 °C and evaluated for L. monocytogenes levels at 0, 24, 48, and 72 h. Initial levels (time 0) of L. monocytogenes were approximately 5.7 log CFU/cm² for steak and tenders. After 24 h of storage time, a 1 log CFU/cm² reduction of L. monocytogenes was observed for turkey tenders for all packaging treatments. After 48 h, turkey tenders showed >1 log CFU/cm² reduction of L. monocytogenes for all packaging treatments except for vacuum, where only 0.9 log CFU/cm² reduction was observed. After 72 h, reductions for all packaging treatments for turkey tenders ranged from 1.5 to 2.4 log CFU/cm². For kippered beef steak, there was no interaction between the packaging treatments and all storage times (P > 0.05) whereas, time was different (P packaging treatments and a 2.1 log CFU/ cm² L. monocytogenes reduction at 72 h of storage time. Processors of kippered beef steak and turkey tenders could use a combination of vacuum or nitrogen-flushing or heat sealed with an oxygen scavenger packaging methods and a holding time of 24 h prior to shipping to reduce potential L. monocytogenes numbers by ≥1 log. However, processors should be encouraged to hold packaged product a minimum of 72 h to enhance the margin of safety for L. monocytogenes control. © 2011 Institute of Food Technologists®

  17. The Food Safety of Livestock Products (Meatball, Corned Beef, Beef Burger and Sausage Studied from Heavy Metal Residues Contamination

    Directory of Open Access Journals (Sweden)

    E Harlia

    2010-01-01

    Full Text Available The aims of animal husbandry improvements are to increase both the quality and the quantity of livestock production and to ensure the safety of the product. It is necessarry for consumers to pay attention to the food safety of livestock product because it is related to human's health. The research was conducted to determine the food safety of livestock product condition by detecting heavy metal residues on several food products from livestock like meatball, corned beef, burger’s beef, and sausages. This research was explored by using survey's method and purposive technique sampling, then the resulted data were descriptively analyzed. The observed variables were heavy metal contents such as Plumbum (Pb and Cadmium (Cd in which being measured by using AAS (Atomic Absorption Spectrophotometri . The result showed that in general, heavy metal residue of Pb from several livestock products (meatball, corned beef, beef burger, and sausages were smaller than Maximum Residue Limit (MRL, while the Cd’s residue was partly over the MRL concentration, therefore further action has to be taken as it affects the human's health. (Animal Production 12(1: 50-54 (2010 Key words : food safety, MRL, heavy metal Pb, Cd.

  18. Possibility of introducing Smallholder Beef Cattle Farmer’s Association as a starting point to develop the beef cattle chain and improve their income in Arua district, Uganda

    NARCIS (Netherlands)

    Candia, A.

    2008-01-01

    The theme of the research is “Possibility of introducing smallholder Beef Cattle Farmers Association as a starting point to develop the beef chain and improve their income in Arua district, Uganda”. The study was carried out in two Sub Counties of Arua district, Uganda. The objective was to

  19. Spanish, French and British consumers' acceptability of Uruguayan beef, and consumers' beef choice associated with country of origin, finishing diet and meat price.

    Science.gov (United States)

    Realini, C E; Font i Furnols, M; Sañudo, C; Montossi, F; Oliver, M A; Guerrero, L

    2013-09-01

    The effect of country of origin (local, Switzerland, Argentina, Uruguay), finishing diet (grass, grass plus concentrate, concentrate), and price (low, medium, high) on consumer's beef choice and segmentation was evaluated in Spain, France and United Kingdom. Sensory acceptability of Uruguayan beef from different production systems was also evaluated and contrasted with consumers' beef choices. Origin was the most important characteristic for the choice of beef with preference for meat produced locally. The second most important factor was animal feed followed by price with preference for beef from grass-fed animals and lowest price. The least preferred product was beef from Uruguay, concentrate-fed animals and highest price. Sensory data showed higher acceptability scores for Uruguayan beef from grass-fed animals with or without concentrate supplementation than animals fed concentrate only. Consumer segments with distinct preferences were identified. Foreign country promotion seems to be fundamental for marketing beef in Europe, as well as the development of different marketing strategies to satisfy each consumer segment. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Fast timing readout for silicon strip detectors

    International Nuclear Information System (INIS)

    Jhingan, A.; Saneesh, N.; Kumar, M.

    2016-01-01

    The development and performance of a 16 channel hybrid fast timing amplifier (FTA), for extracting timing information from silicon strip detectors (SSD), is described. The FTA will be used in a time of flight (TOF) measurement, in which one SSD is used to obtain the ion velocity (A) as well as the energy information of a scattered particle. The TOF information with a thin transmission SSD, acting as ΔE detector (Z) in a detector telescope, will provide a unique detection system for the identification of reaction products in the slowed down beam campaign of low energy branch (LEB) at NUSTAR-FAIR. Such a system will also provide large solid angle coverage with ~ 100% detection efficiency, and adequate segmentation for angular information. A good timing resolution (≤ 100 ps) enables to have shorter flight paths, thus a closely packed 4π array should be feasible. Preamplifiers for energy readout in SSD are easily available. A major constraint with SSDs is the missing high density multichannel preamplifiers which can provide both fast timing as well as energy. Provision of both timing and energy processing, generally makes circuit bulky, with higher power consumption, which may not be suitable in SSD arrays. In case of DSSSD, the problem was overcome by using timing from one side and energy from the other side. A custom designed 16 channel FTA has been developed for DSSSD design W from Micron Semiconductors, UK

  1. Process Simulation Analysis of HF Stripping

    Directory of Open Access Journals (Sweden)

    Thaer A. Abdulla

    2015-02-01

    Full Text Available    HYSYS process simulator is used for the analysis of existing HF stripping column in LAB plant (Arab Detergent Company, Baiji-Iraq. Simulated column performance and profiles curves are constructed. The variables considered are the thermodynamic model option, bottom temperature, feed temperature, and column profiles for the temperature, vapor flow rate, liquid flow rate and composition. The five thermodynamic models options used (Margules, UNIQUAC, van laar, Antoine, and Zudkevitch-Joffee, affecting the results within (0.1-58% variation for the most cases.        The simulated results show that about 4% of paraffin (C10 & C11 presents at the top stream, which may cause a problem in the LAB production plant. The major variations were noticed for the total top vapor flow rate with bottom temperature and with feed composition. The column profiles maintain fairly constants from tray 5 to tray 18. The study gives evidence about a successful simulation with HYSYS because the results correspond with the real plant operation data.

  2. Profile of a science comic strip author

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    After studying visual arts, Lison Bernet worked as a lock keeper, waitress, grape picker, farm labourer and chef before finally returning to her first love: drawing. Today a scientific illustrator, Lison is the author of the cartoon strip "La BD du LHC", which she draws every month for LHC France (by CNRS/IN2P3 and CEA/Irfu, see here).   © Lison Bernet. Lison’s career path might seem somewhat chaotic, but it is a reflection of the artist herself: original and passionate. “I never do anything by half measures. When I got into cooking for example [Lison took a chef training course for adults], I became completely wrapped up in it. I even went as far as cooking roasts during my lunch hour, just for practice…” says Lison. On completing the course, Lison got a job as a chef on a canal boat. And it was then that she got the drawing bug again. “I started keeping an illustrated travel diary,” she says. &ldquo...

  3. The GLAST silicon-strip tracking system

    International Nuclear Information System (INIS)

    Johnson, Robert P.

    2000-01-01

    The GLAST instrument concept is a gamma-ray pair conversion telescope that uses silicon microstrip detector technology to track the electron-positron pairs resulting from gamma-ray conversions in thin lead foils. A cesium iodide calorimeter following the tracker is used to measure the gamma-ray energy. Silicon strip technology is mature and robust, with an excellent heritage in space science and particle physics. It has many characteristics important for optimal performance of a pair conversion telescope, including high efficiency in thin detector planes, low noise, and excellent resolution and two-track separation. The large size of GLAST and high channel count in the tracker puts demands on the readout technology to operate at very low power, yet with sufficiently low noise occupancy to allow self triggering. A prototype system employing custom-designed ASIC's has been built and tested that meets the design goal of approximately 200 W per channel power consumption with a noise occupancy of less than one hit per trigger per 10,000 channels. Detailed design of the full-scale tracker is well advanced, with non-flight prototypes built for all components, and a complete 50,000 channel engineering demonstration tower module is currently under construction and will be tested in particle beams in late 1999. The flight-instrument conceptual design is for a 4x4 array of tower modules with an aperture of 2.9 m2 and an effective area of greater than 8000 cm2

  4. The GLAST Silicon-Strip Tracking System

    International Nuclear Information System (INIS)

    Johnson, R

    2004-01-01

    The GLAST instrument concept is a gamma-ray pair conversion telescope that uses silicon microstrip detector technology to track the electron-positron pairs resulting from gamma ray conversions in thin lead foils. A cesium iodide calorimeter following the tracker is used to measure the gamma-ray energy. Silicon strip technology is mature and robust, with an excellent heritage in space science and particle physics. It has many characteristics important for optimal performance of a pair conversion telescope, including high efficiency in thin detector planes, low noise, and excellent resolution and two-track separation. The large size of GLAST and high channel count in the tracker puts demands on the readout technology to operate at very low power, yet with sufficiently low noise occupancy to allow self triggering. A prototype system employing custom-designed ASIC's has been built and tested that meets the design goal of approximately 200 (micro)W per channel power consumption with a noise occupancy of less than one hit per trigger per 10,000 channels. Detailed design of the full-scale tracker is well advanced, with non-flight prototypes built for all components, and a complete 50,000 channel engineering demonstration tower module is currently under construction and will be tested in particle beams in late 1999. The flight-instrument conceptual design is for a 4 x 4 array of tower modules with an aperture of 2.9 m 2 and an effective area of greater than 8000 cm 2

  5. Effects of crossing of domestic breed with beef breeds on the quality of meat in PR China and Republic of Serbia

    OpenAIRE

    Aleksić, S.; Fang, Sun; Di, Liu; Petrović, M.M.; Pantelić, V.; Stanišić, N.; Ostojić-Andrić, D.; Petričević, M.; Nikšić, D.; Delić, N.

    2013-01-01

    This paper presents the results of crossing Domestic Spotted breed with beef cattle breeds in the People's Republic of China and the Republic of Serbia. China is a big country of beef production and consumption. In 2012, beef production in China was 5,540,000 tons, which accounted for 9.7% of the global beef production, ranking the third in the world. The main sources of China’s beef are from crossbreeding cattle (native breed crossbred with foreign beef ca...

  6. Continuous Strip Reduction Test Simulating Tribological Conditions in Ironing

    DEFF Research Database (Denmark)

    Üstünyagiz, Esmeray; Nielsen, Chris Valentin; Christiansen, Peter

    2017-01-01

    materials, surface roughnesses, normal pressure, sliding length, sliding speed, interface temperature and lubrication. This paper proposes a new Strip Reduction Test (SRT) for industrial ironing processes that is capable of replicating the highly severe tribological conditions that are experienced during...

  7. Hollow Mill for Extraction of Stripped Titanium Screws: An Easy ...

    African Journals Online (AJOL)

    countries. The known alternative in such condition is ... Key words: Hollow mill, stripped screws, titanium locked plates ... used a locally manufactured stainless steel hollow mill, ... head ‑ plate hole” assembly as a mono‑block single unit. In.

  8. The New Silicon Strip Detectors for the CMS Tracker Upgrade

    CERN Document Server

    Dragicevic, Marko

    2010-01-01

    The first introductory part of the thesis describes the concept of the CMS experiment. The tasks of the various detector systems and their technical implementations in CMS are explained. To facilitate the understanding of the basic principles of silicon strip sensors, the subsequent chapter discusses the fundamentals in semiconductor technology, with particular emphasis on silicon. The necessary process steps to manufacture strip sensors in a so-called planar process are described in detail. Furthermore, the effects of irradiation on silicon strip sensors are discussed. To conclude the introductory part of the thesis, the design of the silicon strip sensors of the CMS Tracker are described in detail. The choice of the substrate material and the complex geometry of the sensors are reviewed and the quality assurance procedures for the production of the sensors are presented. Furthermore the design of the detector modules are described. The main part of this thesis starts with a discussion on the demands on the ...

  9. Data acquisition software for the CMS strip tracker

    International Nuclear Information System (INIS)

    Bainbridge, R; Cripps, N; Fulcher, J; Radicci, V; Wingham, M; Baulieu, G; Bel, S; Delaere, C; Drouhin, F; Gill, K; Mirabito, L; Cole, J; Jesus, A C A; Giassi, A; Giordano, D; Gross, L; Hahn, K; Mersi, S; Nikolic, M; Tkaczyk, S

    2008-01-01

    The CMS silicon strip tracker, providing a sensitive area of approximately 200 m 2 and comprising 10 million readout channels, has recently been completed at the tracker integration facility at CERN. The strip tracker community is currently working to develop and integrate the online and offline software frameworks, known as XDAQ and CMSSW respectively, for the purposes of data acquisition and detector commissioning and monitoring. Recent developments have seen the integration of many new services and tools within the online data acquisition system, such as event building, online distributed analysis, an online monitoring framework, and data storage management. We review the various software components that comprise the strip tracker data acquisition system, the software architectures used for stand-alone and global data-taking modes. Our experiences in commissioning and operating one of the largest ever silicon micro-strip tracking systems are also reviewed

  10. Electroplating and stripping copper on molybdenum and niobium

    Science.gov (United States)

    Power, J. L.

    1978-01-01

    Molybdenum and niobium are often electroplated and subsequently stripped of copper. Since general standard plating techniques produce poor quality coatings, general procedures have been optimized and specified to give good results.

  11. Digital simulation of anodic stripping voltammetry from thin film electrodes

    International Nuclear Information System (INIS)

    Magallanes, J.F.

    1984-01-01

    The anodic stripping voltammetry (ASV) is routinely applied to control of Cu(II) in heavy water in the primary cooling loop of the Nuclear Power Reactor. The anodic stripping voltammetry (ASV) is a very well-known technique in electroanalytical chemistry. However, due to the complexity of the phenomena, it is practised with the fundamentals of empiric considerations. A geometric model for the anodic stripping voltammetry (ASV) from thin film electrodes which can be calculated by explicit digital simulation method is proposed as a possibility of solving the electrochemically reversible, cuasi-reversible and irreversible reactions under linear potential scan and multiple potential scans. (Until now the analytical mathematical method was applied to reversible reactions). All the results are compared with analytical solutions and experimental results and it permits to conclude that the anodic stripping voltammetry (ASV) can be studied with the simplicity and potentialities of explicit digital simulation methods. (M.E.L.) [es

  12. Results of Laboratory Testing of Advanced Power Strips: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Earle, L.; Sparn, B.

    2012-08-01

    This paper describes the results of a laboratory investigation to evaluate the technical performance of advanced power strip (APS) devices when subjected to a range of home entertainment center and home office usage scenarios.

  13. Nanoscale Test Strips for Multiplexed Blood Analysis, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of our nanoscale test strips, or nanostrips, is to provide rapid, low-cost, powerful multiplexed analyses in a diminutive form so that whole body health...

  14. High Pressure Water Stripping Using Multi-Orifice Nozzles

    Science.gov (United States)

    Hoppe, David

    1999-01-01

    The use of multi-orifice rotary nozzles greatly increases the speed and stripping effectiveness of high pressure water blasting systems, but also greatly increases the complexity of selecting and optimizing the operating parameters. The rotational speed of the nozzle must be coupled with its transverse velocity as it passes across the surface of the substrate being stripped. The radial and angular positions of each orifice must be included in the analysis of the nozzle configuration. Orifices at the outer edge of the nozzle head move at a faster rate than the orifices located near the center. The energy transmitted to the surface from the impact force of the water stream from an outer orifice is therefore spread over a larger area than energy from an inner orifice. Utilizing a larger diameter orifice in the outer radial positions increases the total energy transmitted from the outer orifice to compensate for the wider distribution of energy. The total flow rate from the combination of all orifices must be monitored and should be kept below the pump capacity while choosing orifice to insert in each position. The energy distribution from the orifice pattern is further complicated since the rotary path of all the orifices in the nozzle head pass through the center section. All orifices contribute to the stripping in the center of the path while only the outer most orifice contributes to the stripping at the edge of the nozzle. Additional orifices contribute to the stripping from the outer edge toward the center section. With all these parameters to configure and each parameter change affecting the others, a computer model was developed to track and coordinate these parameters. The computer simulation graphically indicates the cumulative affect from each parameter selected. The result from the proper choices in parameters is a well designed, highly efficient stripping system. A poorly chosen set of parameters will cause the nozzle to strip aggressively in some areas

  15. PECULIAR FEATURES PERTAINING TO STRIP FORMATION FROM BAR

    Directory of Open Access Journals (Sweden)

    G. N. Zdor

    2010-01-01

    Full Text Available The paper describes results of calculations and presents experimental substantiation of the dependence of a strip width being rolled out of a 10-mm diameter bar on its final thickness. It has been shown that the formation technology of thin steel strips out of a round bar makes it possible without any difficulties to obtain rolled products with the given cross-section dimensions due to proper selection of single drafting.

  16. The Strip: Las Vegas and the Symbolic Destruction of Spectacle

    OpenAIRE

    Al, Stefan Johannes

    2010-01-01

    Over the past 70 years, various actors have dramatically reconfigured the Las Vegas Strip in many forms. I claim that behind the Strip's "reinventions" lies a process of symbolic destruction. Since resorts distinguish themselves symbolically, each new round of capital accumulation relies on the destruction of symbolic capital of existing resorts. A new resort either ups the language within a paradigm, or causes a paradigm shift, which devalues the previous resorts even further. This is why, i...

  17. Optimising carbon electrode materials for adsorptive stripping voltammetry

    OpenAIRE

    Chaisiwamongkhol, K; Batchelor-McAuley, C; Sokolov, S; Holter, J; Young, N; Compton, R

    2017-01-01

    Different types of carbon electrode materials for adsorptive stripping voltammetry are studied through the use of cyclic voltammetry. Capsaicin is utilised as a model compound for adsorptive stripping voltammetry using unmodified and modified basal plane pyrolytic graphite (BPPG) electrodes modified with multi-walled carbon nanotubes, carbon black or graphene nanoplatelets, screen printed carbon electrodes (SPE), carbon nanotube modified screen printed electrodes, and carbon paste electrodes....

  18. An analysis of stripping to isolated analog resonances

    International Nuclear Information System (INIS)

    Pessoa, E.F.; Toledo Piza, A.F.R. de.

    1983-04-01

    The Feshbach projection formalism is used to calculate the form factors for the (d,n) stripping process to isolated analog resonances. These are used in a standard DWBA stripping calculation in which the radial integration over all space is accomplished by including outerspace contributions evaluated along the complex contours of Vincent and Fortune. It turns out that the shape and magnitude of the predicted cross section is quite insensitive to the continuum proton wave emanating from the resonant residual state. (Author) [pt

  19. Beef customer satisfaction: factors affecting consumer evaluations of clod steaks.

    Science.gov (United States)

    Goodson, K J; Morgan, W W; Reagan, J O; Gwartney, B L; Courington, S M; Wise, J W; Savell, J W

    2002-02-01

    An in-home beef study evaluated consumer ratings of clod steaks (n = 1,264) as influenced by USDA quality grade (Top Choice, Low Choice, High Select, and Low Select), city (Chicago and Philadelphia), consumer segment (Beef Loyals, who are heavy consumers of beef; Budget Rotators, who are cost-driven and split meat consumption between beef and chicken; and Variety Rotators, who have higher incomes and education and split their meat consumption among beef, poultry, and other foods), degree of doneness, and cooking method. Consumers evaluated each steak for Overall Like, Tenderness, Juiciness, Flavor Like, and Flavor Amount using 10-point scales. Grilling was the predominant cooking method used, and steaks were cooked to medium-well and greater degrees of doneness. Interactions existed involving the consumer-controlled factors of degree of doneness and(or) cooking method for all consumer-evaluated traits for the clod steak (P affect any consumer evaluation traits or Warner-Bratzler shear force values (P > 0.05). One significant main effect, segment (P = 0.006), and one significant interaction, cooking method x city (P = 0.0407), existed for Overall Like ratings. Consumers in the Beef Loyals segment rated clod steaks higher in Overall Like than the other segments. Consumers in Chicago tended to give more uniform Overall Like ratings to clod steaks cooked by various methods; however, consumers in Philadelphia gave among the highest ratings to clod steaks that were fried and among the lowest to those that were grilled. Additionally, although clod steaks that were fried were given generally high ratings by consumers in Philadelphia, consumers in Chicago rated clod steaks cooked in this manner significantly lower than those in Philadelphia. Conversely, consumers in Chicago rated clod steaks that were grilled significantly higher than consumers in Philadelphia. Correlation and stepwise regression analyses indicated that Flavor Like was driving customer satisfaction of the

  20. A new strips tracker for the upgraded ATLAS ITk detector

    Science.gov (United States)

    David, C.

    2018-01-01

    The ATLAS detector has been designed and developed to function in the environment of the present Large Hadron Collider (LHC). At the next-generation tracking detector proposed for the High Luminosity LHC (HL-LHC), the so-called ATLAS Phase-II Upgrade, the fluences and radiation levels will be higher by as much as a factor of ten. The new sub-detectors must thus be faster, of larger area, more segmented and more radiation hard while the amount of inactive material should be minimized and the power supply to the front-end systems should be increased. For those reasons, the current inner tracker of the ATLAS detector will be fully replaced by an all-silicon tracking system that consists of a pixel detector at small radius close to the beam line and a large area strip tracker surrounding it. This document gives an overview of the design of the strip inner tracker (Strip ITk) and summarises the intensive R&D activities performed over the last years by the numerous institutes within the Strips ITk collaboration. These studies are accompanied with a strong prototyping effort to contribute to the optimisation of the Strip ITk's structure and components. This effort culminated recently in the release of the ATLAS Strips ITk Technical Design Report (TDR).

  1. Induction heating in in-line strip production process

    International Nuclear Information System (INIS)

    Costa, P.; Santinelli, M.

    1995-05-01

    ISP (In-line Strip Production), a continuous process for steel strip production, has recently been set in an italian innovative plant, where ecological impact and power requirements are lighter than usual. This report describes the studies performed by ENEA (Italian Agency for New Technologies, Energy and the Environment), while a prototype reheating facility was arranged by Acciaieria ISP in Cremona (Italy). The authors, after a study of the prototype electromagnetic field, calculate the heating rate, with the thermal network method. Then they detect, with a 1-D-FEM, the heat diffusion through the strip cross section. Afterward, since the heat distribution depends on the eddy current density one, which is given by the magnetic field distribution, the authors, with a 3-D-FEM, carry out a coupled, electromagnetic and thermal, analysis in time domain. The strip temperature map is established by the balance between skin depth heating and surface cooling: a thermal analysis, performed with a moving 2-D-FEM, take into account the effects of the different heating and cooling situations, originated by the strip moving at a speed of 6m/min through four consecutive reheating facilities. The temperatures of a strip sample heated by the prototype have been monitored, acquired by a computer and related with the simulation results. The little difference between experiment and simulation assessed the qualitative and quantitative validity of this analysis, that has come out to be a tool, useful to evaluate the effects of possible improvements to the ISP process

  2. The development of drift-strip detectors based on CdZnTe

    DEFF Research Database (Denmark)

    Gostilo, V.; Budtz-Jørgensen, Carl; Kuvvetli, Irfan

    2002-01-01

    The design and technological development of a CdZnTe drift strip detector is described. The device is based on a monocrystal of dimensions 10 x 10 x 3 mm(3) and has a pitch of 200 mum and a strip width of 100 mum. The strip length is 9.5 mm. The distribution of the leakage currents of the strips...

  3. Short communication. Sensory evaluation of commercial beef produced in Uruguay and three European countries

    OpenAIRE

    San-Julián, R.; Campo, M. M.; Nute, G.; Montossi, F.; Font-i-Furnols, M.; Guerrero, L.; Oliver, M. A.; Sañudo, C.

    2012-01-01

    The main goal of this study was to characterize and compare the organoleptic quality of beef from Uruguay and from three European countries. In Uruguay, 40 Hereford steers were raised exclusively under grazing conditions up to either two or three years old. Meat samples were aged for 20 days, matching commercial conditions. In Europe, one commercial local beef type, with two ageing times (7 and 20 days), from Germany, Spain and the United Kingdom were compared with Uruguayan beef samples, usi...

  4. The Economic Effects of New-Product Beef Promotion in Guatemala

    OpenAIRE

    Leister, Amanda M.; Capps, Oral, Jr.; Rosson, C. Parr, III

    2010-01-01

    The implementation of the Central America-Dominican Republic Free Trade Agreement (CAFTA-DR) has expanded trade opportunities for U.S. agricultural producers. U.S. beef is an important product affected by the agreement, and the United States Meat Export Federation (USMEF) invested in a new product promotion program to increase exports of U.S. beef to Guatemala. Consumer responsiveness and the effectiveness of the U.S. branded beef promotion program are analyzed in this study. Demand responses...

  5. Application of FTIR Spectroscopy and Chemometrics for Halal Authentication of Beef Meatball Adulterated with Dog Meat

    OpenAIRE

    Rahayu, Wiranti Sri; Rohman, Abdul; Martono, Sudibyo; Sudjadi, Sudjadi

    2018-01-01

    Beef meatball is one of the favorite meat-based food products among Indonesian community. Currently, beef is very expensive in Indonesian market compared to other common meat types such as chicken and lamb. This situation has intrigued some unethical meatball producers to replace or adulterate beef with lower priced-meat like dog meat. The objective of this study was to evaluate the capability of FTIR spectroscopy combined with chemometrics for identification and quantification of dog meat (D...

  6. [Study of biological value of beef produced by interspecies hybrids of domestic cattle and wild yaks].

    Science.gov (United States)

    Bagirov, V A; Chernukha, I M; Lisitsin, A V; Zinovieva, N A

    2014-01-01

    The comparative study of the chemical composition and biological values of beef produced by hybrids of Angus cattle with wild yaks (hybrid beef) and pure-bred Angus cattle (traditional beef) has been carried out. Longissimus muscle samples were used for analysis. It was observed, that the hybrid beef samples had the practically equal protein content comparing to traditional beef (21.1 vs. 21.6 per cent) but were characterized by the lower fat content (1.2 vs. 2.5 per cent). The higher biological value of hybrid beef comparing to traditional beef has been shown. The value of protein-quality index, calculated as the ratio of tryptophan amino acid to oxyprolin and characterizing the ratio of high biological value proteins to low biological value proteins was 8.1 vs. 5.7. The values of amino acid indexes [ratio of essential amino acids (EAA) to non-essential amino acids (NAA) and ratio of EAA to the total amount of amino acids (TAA)] were EAA/NAA = 0.77 vs. 0.65 and EAA/TAA = 0.43 vs. 0.39. The protein of hybrid beef was characterized by the higher content of a number of the essential amino acids: by a factor of 1, 77 for threonin, 1.23--for valin, 1.09--for lysin, 1.17--for leucine and 1.19--for tryptophan. The amount of the essential amino acids in 1 gram of protein of the hybrid beef was 434.7 mg against 393.1 mg for traditional beef It has been shown, that the protein of the hybrid beef comparing to traditional beef is characterized by the higher values of the amino acid scores calculated for EAA.

  7. Meat Standards Australia as an Innovation in the Australian Beef Production and Marketing System

    OpenAIRE

    Griffith, Garry R.; Thompson, John M.; Polkinghorne, Rod; Gunner, Richard

    2010-01-01

    Variable eating quality was identified as a major contributor to declining Australian beef consumption in the early 1990s. The primary issue was the inability to predict the eating quality of cooked beef before consumption. A R&D program funded by industry and Meat and Livestock Australia investigated the relationships between critical control points along the supply chain, cooking methods and beef palatability. These relationships were underpinned by extensive consumer taste panels. Out of t...

  8. VALUE OF BEEF STEAK BRANDING: HEDONIC ANALYSIS OF RETAIL SCANNER DATA

    OpenAIRE

    Schulz, Lee L.; Schroeder, Ted C.; White, Katharine L.

    2010-01-01

    Consumers rely on experience and credence attributes when purchasing beef from retailers. It is essential for all beef industry sectors to recognize the complexity of consumer buying behavior. A hedonic model is estimated to determine if there are incentives to brand beef steaks, the types of brands that entertain price premiums, and the level of existing premiums. Most branded steaks garnered premiums along with organic claims, religious processing claims, and premium cuts. Factors influenci...

  9. Adsorptive stripping voltammetry in lipophilic vitamins determination

    Directory of Open Access Journals (Sweden)

    Milan Sýs

    2016-06-01

    Full Text Available The aim of this contribution was to check if adsorptive stripping differential pulse voltammetry (AdSDPV is suitable tool for sensitive simultenous electrochemical detection of lipophilic vitamins. Retinol (vitamin A1, cholecalciferol (vitamin D3, α-tocopherol (vitamin E and phylloquinone (vitamin K1 were selected as representatives. All electrochemical measurements were performed in two separate steps due to the lipophilic character of the analytes. In the first step, an accumulation of lipophilic vitamin on the surface of glassy carbon electrode (GCE was done by immersing working electrode into the aqueous‑acetonitrile solutions (50%, v/v of each vitamin (50.0 µmol.L-1 at 400 rpm for 5 min. In the second one, differential pulse voltammetry of accumulated vitamins was performed in 0.01 mol.L-1 acetate (pH 4.5 buffer at potential step (Estep 5 mV, potential of amplitude (Eampl 25 mV, interval time (t 0.1 s and scan rate (ν 50 mV.s-1. It was observed that electrochemical behaviour of lipophilic vitamins adsorbed on surface of solid GCE in the aqueous electrolyte was very similar to those performed in organic/aqueous electrolyte in literature. Due to reversible electrochemical behaviour of vitamin K1 (phylloquinone/phyllohydroquinone redox couple, it was possible to detect all lipophilic vitamins only in one analysis. Observed values of peak potentials (Ep were sufficiently different for their recognition which was confirmed by the analysis of real sample. The results obtained in this study showed that simultaneous determination of some lipophilic vitamins is possible requiring further optimization study. For this reason, it is necessary to understand this work as an initial step in simultaneous determination of lipophilic vitamins without application of any chromatographic technique.

  10. Travailler loin de son domicile

    OpenAIRE

    Bonnet, Estelle; Verley, Elise; Ries, Tammy

    2017-01-01

    Résumé : La mobilité géographique liée à un lieu de travail éloigné du domicile – supposant soit de longs trajets quotidiens, soit de dormir en dehors du domicile – s’inscrit à l’articulation de la sphère professionnelle et de la sphère privée. Elle met à l’épreuve le couple et la distribution des rôles sexués en son sein. Cet article interroge les divisions sexuées inhérentes à cette articulation selon que l’on se place du point de vue d’une mobilité féminine ou masculine. Il examine en quoi...

  11. Contamination of beef products with staphylococcal classical enterotoxins in Egypt and Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Shawish, Reyad R.

    2016-04-01

    Full Text Available Food-borne pathogens are of high concern for public health and food safety. food poisoning is one of the most economically devastating types of food poisoning globally. The purpose of this study was to detect staphylococcal classical enterotoxins (SEs in processed beef from Kingdom of Saudi Arabia (KSA and Egypt. In the present investigation a total of 250 random processed meat samples (50 each of minced meat, beef burger, beef sausage, beef kofta and beef luncheon were collected from different super markets in the study area. Using conventional cultural methods, samples were cultured for isolation and identification of . Multiplex PCR was used to detect SEs of the classical type SEA, SEB, SEC and SED from isolates.The percentage presence of in minced meat, beef burger, beef sausage, beef kofta and beef luncheon was 38%, 22%, 30%, 32% and 12%, respectively. Multiplex PCR indicated that all examined samples contain different types of classical staphylococcal enterotoxins and only minced meat samples contained all four types of toxins. Multiplex PCR is efficient in detection of SEs from food and may be used in tracing of toxins to promote food hygiene. Implications of contamination of processed meat to food hygiene in the study area are highlighted.

  12. Test-beam evaluation of heavily irradiated silicon strip modules for ATLAS Phase-II Strip Tracker Upgrade

    CERN Document Server

    Blue, Andrew; The ATLAS collaboration

    2018-01-01

    The planned HL-LHC (High Luminosity LHC) is being designed to maximise the physics potential of the LHC with 10 years of operation at instantaneous luminosities of 7.5x1034cm−2s−1. A consequence of this increased luminosity is the expected radiation damage requiring the tracking detectors to withstand hadron equivalences to over 1x1015 1 MeV neutron equivalent per cm2 in the ATLAS Strips system. The silicon strip tracker exploits the concept of modularity. Fast readout electronics, deploying 130nm CMOS front-end electronics are glued on top of a silicon sensor to make a module. The radiation hard n-in-p micro-strip sensors used have been developed by the ATLAS ITk Strip Sensor collaboration and produced by Hamamatsu Photonics. A series of tests were performed at the DESY-II and CERN SPS test beam facilities to investigate the detailed performance of a strip module with both 2.5cm and 5cm length strips before and after irradiation with 8x1014neqcm−2 protons and a total ionising dose of 37.2MRad. The DURA...

  13. Comparison between conventional and ultrasonic preparation of beef tallow biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Leonardo S.G. [Instituto de Quimica - Universidade Federal da Bahia, Campus Universitario de Ondina, 40.170-280 - Salvador, Bahia (Brazil); Assis, Julio C.R.; Santos, Iran T.V.; Guimaraes, Paulo R.B.; Pontes, Luiz A.M. [Universidade Salvador - UNIFACS - Departamento de Engenharia e Arquitetura, - Av. Cardeal da Silva 132, 40.220-141 - Salvador, Bahia (Brazil); Mendonca, Daniel R. [Escola Politecnica - Universidade Federal da Bahia, Av. Aristides Novis 2, 40.210-630, Salvador, Bahia (Brazil); Teixeira, Josanaide S.R. [Instituto Federal de Educacao Ciencia e Tecnologica da Bahia - IFBAHIA - Rua Emidio de Morais S/N, 40.625-650, Salvador - BA (Brazil)

    2009-09-15

    Tallow is biodiesel feedstock that, due to its highly centralized generation in slaughter/processing facilities and historically low prices, may have energetic, environmental, and economic advantages that could be exploited. Transesterification of fatty acids by means of ultrasonic energy has been used for biodiesel production from different vegetable oils. However, application of ultrasonic irradiation for biodiesel production from beef tallow has received little attention. In this work, the transesterification of beef tallow with methanol was performed in the presence of potassium hydroxide as a catalyst using ultrasound irradiation (400 W, 24 kHz). The reaction time, conversion and biodiesel quality were compared with that seen in conventional transesterification. The results indicated that the reaction conversion and biodiesel quality were similar; however, the use of ultrasonic irradiation decreased the reaction time, showing that this method may be a promising alternative to the conventional method. (author)

  14. Consumers' willingness to pay for irradiated prepared ground beef

    International Nuclear Information System (INIS)

    Nayga, R.M. Jr.; Woodward, R.; Aiew, W.

    2009-01-01

    This paper focuses on estimating willingness to pay for reducing the risk of contracting foodborne illness using a non-hypothetical experiment utilizing real food products (i.e. prepared ground beef), real cash and actual exchange in a market setting. Respondents were given positive information about the nature of food irradiation. Single bounded and one and one-half bounded models are developed using dichotomous choice experiments. The results indicate that individuals are willing to pay for a reduction in the risk of foodborne illness once informed about the nature of food irradiation. Respondents are willing to pay a premium of about US $0.77 for 450 g (1 pound) of irradiated ground beef, which is higher than the cost of irradiating the product. (author)

  15. Irradiation of ground beef with the purpose of refrigerated storage

    International Nuclear Information System (INIS)

    Keskin, S.

    1977-01-01

    Ground beef packaged in polyethylene film was irradiated at different dose levels ranging from 0.25 to 1.0 Mrad and stored at 3+-1 0 C. Bacteriological and organoleptic evaluations were carried out immediately after irradiation and at weekly intervals thereafter. The red color of the meat was darker after irradiation and this darkening increased with radiation dose. This color change was limited to the surface of the samples. The results of the bacteriological and organoleptic examination indicate that irradiation at 0.25 Mrad permits refrigerated storage of ground beef for 3 weeks, 0,5 Mrad for 6 weeks. Coliforms were found only in non-irradiated samples [fr

  16. You say "lean finely textured beef," I say "pink slime".

    Science.gov (United States)

    Reid, Rita-Marie Cain

    2014-01-01

    In 2012, American Broadcasting Companies, Inc. (ABC) broadcast a segment on its evening news show regarding the manufacture of "lean finely textured beef" by Beef Products, Inc. (BPI). The broadcast, as well as follow-up reports and social media communications, repeatedly referred to the product as "pink slime," a term originated by a United States Department of Agriculture (USDA) employee for the processed meat. The market backlash against the product was immediate and intense. Ultimately, BPI closed three processing plants, cut hundreds of jobs, and filed for bankruptcy. BPI sued ABC and others for food libel, defamation, and tortious interference. This research analyzes those claims and defenses and discusses the future of such cases.

  17. Comparison between conventional and ultrasonic preparation of beef tallow biodiesel

    International Nuclear Information System (INIS)

    Teixeira, Leonardo S.G.; Assis, Julio C.R.; Santos, Iran T.V.; Guimaraes, Paulo R.B.; Pontes, Luiz A.M.; Mendonca, Daniel R.; Teixeira, Josanaide S.R.

    2009-01-01

    Tallow is biodiesel feedstock that, due to its highly centralized generation in slaughter/processing facilities and historically low prices, may have energetic, environmental, and economic advantages that could be exploited. Transesterification of fatty acids by means of ultrasonic energy has been used for biodiesel production from different vegetable oils. However, application of ultrasonic irradiation for biodiesel production from beef tallow has received little attention. In this work, the transesterification of beef tallow with methanol was performed in the presence of potassium hydroxide as a catalyst using ultrasound irradiation (400 W, 24 kHz). The reaction time, conversion and biodiesel quality were compared with that seen in conventional transesterification. The results indicated that the reaction conversion and biodiesel quality were similar; however, the use of ultrasonic irradiation decreased the reaction time, showing that this method may be a promising alternative to the conventional method. (author)

  18. National Beef Quality Audit-2000: survey of targeted cattle and carcass characteristics related to quality, quantity, and value of fed steers and heifers.

    Science.gov (United States)

    McKenna, D R; Roebert, D L; Bates, P K; Schmidt, T B; Hale, D S; Griffin, D B; Savell, J W; Brooks, J C; Morgan, J B; Montgomery, T H; Belk, K E; Smith, G C

    2002-05-01

    The National Beef Quality Audit-2000 was conducted to assess the current status ofthe quality and consistency of U.S. fed steers and heifers. Between May and November 2000, survey teams assessed hide condition (n = 43,415 cattle for color, brands, mud/manure), bruises (n = 43,595 carcasses), offal and carcass condemnation (n = 8,588 cattle), and carcass quality and yield information (n = 9,396 carcasses) in 30 U.S. beef packing plants. Hide colors were black (45.1%), red (31.0%), yellow (8.0%), Holstein (5.7%), gray (4.0%), white (3.2%), brown (1.7%), and brindle (1.3%). Brand frequencies were no (49.3%), one (46.2%), and two or more (4.4%), and brands were located on the butt (36.3%), side (13.7%), and shoulder (3.6%). Most cattle had no (18.0%) or a small amount (55.8%) of mud/manure on their hides, and they had no (77.3%) horns. Most carcasses (53.3%) were not bruised, 30.9% had one bruise, and 15.8% had multiple bruises. Bruise location and incidence were round (14.9%), loin (25.9%), rib (19.4%), chuck (28.2%), and brisket, flank, and plate (11.6%). Condemnation item and incidence were liver (30.3%), lungs (13.8%), tripe (11.6%), heads (6.2%), tongues (7.0%), and carcasses (0.1%). Carcass evaluation revealed these traits and frequencies: steer (67.9%), heifer (31.8%), and bullock (0.3%) sex-classes; dark-cutters (2.3%); A (96.6%), B (2.5%), and C or older (0.9%) overall maturities; and native (90.1%), dairy-type (6.9%), and Bos indicus (3.0%) breed-types. Mean USDA yield grade traits were USDA yield grade (3.0), carcass weight (356.9 kg), adjusted fat thickness (1.2 cm), longissimus muscle area (84.5 cm2), and kidney, pelvic, and heart fat (2.4%). USDA yield grades were Yield Grade 1 (12.2%), Yield Grade 2 (37.4%), Yield Grade 3 (38.6%), Yield Grade 4 (10.4%), and Yield Grade 5 (1.3%). Mean USDA quality grade traits were USDA quality grade (Select85), marbling score (Small23), overall maturity (A66), lean maturity (A65), and skeletal maturity (A67). Marbling

  19. Optimising reproductive performance of beef cows and replacement heifers.

    Science.gov (United States)

    Diskin, M G; Kenny, D A

    2014-05-01

    A reproductively efficient beef cow herd is fundamental to meeting the protein and specifically, red meat demand of an ever increasing global population. However, attaining a high level of reproductive efficiency is underpinned by producers being cognisant of and achieving many key targets throughout the production cycle and requires significant technical competency. The lifetime productivity of the beef bred female commences from the onset of puberty and will be dictated by subsequent critical events including age at first calving, duration of the postpartum interval for each successive calving, conception and pregnancy rate and ultimately manifested as length of intercalving intervals and number of calves weaned over her lifetime. Puberty in heifers is a consequence of the interactive effects of genetics and both pre- and post-weaning nutrition. Early onset of puberty is essential to achieving the first main reproductive target for beef cow herds; first calving at 2 years of age. In calved heifers and mature cows, the onset of ovarian activity, postpartum is a key event dictating the calving interval. Again, this will be the product mainly of prepartum nutrition, manifested through body condition and the strength of the maternal bond between cow and calf, though there is increasing evidence of a modest genetic influence on this trait. Following the initiation of postpartum ovarian cyclicity, conception and subsequent pregnancy rate is generally a function of bull fertility in natural service herds and heat detection and timing of insemination in herds bred through artificial insemination. Cows and heifers should be maintained on a steady plane of nutrition during the breeding season, but the contribution of significant excesses or deficiencies of nutrients including protein and trace elements is likely to be minor where adequate pasture is available. While, increased efforts are being made internationally to genetically identify and select for more reproductively

  20. Identifying efficiency trends for Queensland broad-acre beef enterprises

    OpenAIRE

    Gregg, Daniel; Rolfe, John

    2010-01-01

    Productivity and efficiency improvements in agriculture have recently been targeted as Federal Government priorities in Australia. This research examined a dataset of 116 broad-acre beef enterprises from Queensland who participated in a program, Profit Probe, developed to improve management and profitability of enterprises. The aim of this research was to identify the sources, if any, of productivity growth for this sample of enterprises. Two potential sources of productivity growth were iden...

  1. Evaluation of Fresh Food Internet Shopping in Korean Beef

    OpenAIRE

    金, 鍾和; 森高, 正博; 福田, 晋; Kim, Jong-hwa; Moritaka, Masahiro; Fukuda, Susumu

    2013-01-01

    This paper focuses on consumer reactions to the fresh food internet shopping on Korea beef. In the paper, we have analyzed an effective relation in consumer's perceived qualities, the evaluation of commodities and the evaluation of fresh food internet shopping. As a result, two effective relations were found. Firstly, consumer's perceived qualities affect the evaluation of commodities. Secondly, the evaluation of commodities affects t-he evaluation of fresh food internet shopping. This result...

  2. Electrophoretic comparison of nuclear and nucleolar proteins : I. Beef Pancreas

    NARCIS (Netherlands)

    Poort, C.

    1961-01-01

    Nuclei and nucleoli, isolated from beef pancreas, are extracted with 0.14 M NaCl, 1 M NaCl and 0.1 N NaOH in the order given. The 0.14 M NaCl and 0.1 N NaOH extracts lend themselves to paper and agar electrophoresis and the electropherograms obtained from these extracts of nuclei and nucleoli are

  3. Assessing impacts of organic production on pork and beef quality

    OpenAIRE

    Sundrum, Albert

    2010-01-01

    Organic livestock farming is based on a low input production method, aiming to provide products of a high product and process quality rather than maximizing production. The production of a high meat quality corresponds to the expectations of consumers who are both seeking a premium product and who are willing to pay premium prices. This review focuses on the question of whether organic pork and beef production currently meet consumer demands, and it elaborates the potentials and limitations f...

  4. Calm temperament improves reproductive performance of beef cows.

    Science.gov (United States)

    Kasimanickam, R; Asay, M; Schroeder, S; Kasimanickam, V; Gay, J M; Kastelic, J P; Hall, J B; Whittier, W D

    2014-12-01

    Profitability of a beef operation is determined by the proportion of cows attaining pregnancy early in the breeding season and those that are pregnant at the end of breeding season. Many factors, including temperament, contribute to those reproductive parameters. The objective of this study was to evaluate effects of temperament on reproductive performance of beef cows. In Experiment 1, Angus and Angus-cross beef cows (n = 1546) from eight locations were assigned a body condition score (BCS; 1 = emaciated; 9 = obese) and chute exit and gait score (1 = slow exit, walk; calm temperament; 2 = jump, trot or run; excitable temperament). Cows were grouped with bulls (1 : 25 to 1 : 30; with satisfactory breeding potential and free of venereal disease) for an 85-day breeding season. Pregnancy status and stage of gestation were determined (transrectal palpation) 35 days after the end of the breeding season. Controlling for BCS (p score interaction (p scores for body condition and chute exit and gait (as described in Experiment 1) and assigned to bulls (breeding sound and free of venereal disease; 1 : 25 to 1 : 30) for 85 days. Pregnancy status was determined by transrectal palpation at 2 and 6 months after the onset of the breeding season. Controlling for BCS (p reproductive performance than calmer cows. The modified two-point chute exit-gait scoring method was repeatable and identified cattle with an excitable temperament. © 2014 Blackwell Verlag GmbH.

  5. Cooking frozen and thawed roasts: beef, pork, and lamb cuts.

    Science.gov (United States)

    Fulton, C; Davis, C

    1975-09-01

    Cooking time, yield, and palatability of paired beef, pork, and lamb roasts cooked from the frozen and thawed states were compared. Cooking time for all roasts averaged from 3 to 22 min. per pound longer for meat cooked from the frozen state. The longer cooking time from the frozen state. The longer cooking time from the frozen state was greater for roasts with a large amount of bone and for cuts cooked by braising than for less bony roasts and cuts cooked by roasting. Except for thawed beef rump roasts, which had a higher yield of cooked lean meat, yield of cooked lean meat from the various cuts of beef, pork, and lamb was not affected by the state at the start of cooking. Collectively, all pork roasts had a higher yield of cooked lean meat when cooked from the frozen state. Juiciness and natural flavor of the roasts were not affected by the state at the start of cooking. Lamb leg and rib roasts were more tender when cooked from the thawed state.

  6. Nutrient Composition of Retail Samples of Australian Beef Sausages

    Directory of Open Access Journals (Sweden)

    Judy Cunningham

    2015-11-01

    Full Text Available Some nutrient data for beef sausages in Australia’s food composition table, NUTTAB 2010, is over 25 years old and may no longer reflect the composition of this popular food. To update this, 41 retail samples of fresh beef sausages were purchased in Melbourne, Australia, in May 2015. Each purchase was analysed, uncooked, for moisture, protein and fat. Sausages were then grouped by fat content into one of three composites and analysed for a wide range of nutrients, before and after dry heat cooking, the most popular sausage cooking method. Fat content in raw sausages averaged 14.9 g/100 g, 30% lower than NUTTAB values, varying from 7.3 to 22.6 g/100 g. This indicates it is possible to formulate leaner sausages that meet consumer expectations and may qualify for certain nutrition labelling statements. Under current Australian labelling requirements, two low fat sausages contain sufficient protein, B12, niacin, phosphorus and zinc to qualify as a good source of these nutrients and sufficient iron, selenium and vitamin A to qualify as a source of these. Sodium levels are higher than fresh beef, ranging from 680 to 840 mg/100 g. These data will be used to update NUTTAB and support product labelling and consumer education.

  7. Sensory quality of beef from different finishing diets.

    Science.gov (United States)

    Resconi, V C; Campo, M M; Font i Furnols, M; Montossi, F; Sañudo, C

    2010-11-01

    Beef production under different local husbandry systems might have meat sensory quality implications for the marketing of these products abroad. In order to assess the effect of finishing diet systems on beef quality, a trained sensory taste panel assessed meat aged for 20 days from 80 Uruguayan Hereford steers that were finished on one of the following diets: T1=Pasture [4% of animal live weight (LW)], T2=Pasture [3% LW plus concentrate (0.6% LW)], T3=Pasture [3% LW plus concentrate (1.2% LW)], or T4=Concentrate plus hay ad libitum. Beef odour and flavour intensities decreased with an increase in the energy content of the diet. The meat from T2 had the lowest acid flavour and strange odours intensities. In general, steers fed only concentrate plus hay (T4) produced meat that had an inferior sensory quality because they had more pronounced off-flavours and was tougher. Copyright © 2010 The American Meat Science Association. Published by Elsevier Ltd. All rights reserved.

  8. Experimental verification of the possibility to estimate senzoric and quality parameters of beef with use of bioimpedance

    Czech Academy of Sciences Publication Activity Database

    Říha, J.; Kadlec, R.; Vondra, Vlastimil; Bezdíček, J.

    2009-01-01

    Roč. 51, č. 4 (2009), s. 38-49 ISSN 0139-7265 Institutional research plan: CEZ:AV0Z20650511 Keywords : beef quality * biompedance * basic chemical composition of beef Subject RIV: GM - Food Processing

  9. MODEL SYSTEM EVALUATIONS OF MEAT EMULSIONS PREPARED WITH DIFFERENT EDIBLE BEEF BY PRODUCTS AND FATS AND OIL

    Directory of Open Access Journals (Sweden)

    Mustafa KARAKAYA

    1997-02-01

    Full Text Available Emulsion parameters of different meat by-products (beef head-meat, beef heart and liver and animal fats and oil (beef fat, mutton fat, sheep tail-fat and corn oil were studied in a model system. The results of the study showed that the highest emulsion capacity (EC was with the heart meat and beef fat emulsion while the lowest EC was measured in the beef head-meat and sheep tail-fat combination. Corn oil gave the best emulsification with beef head-meat and liver, and beef fat resulted the second best results. Beef head-meat gave the most stable emulsion with all fats, but the emulsions prepared with heart and liver were generally unstable.

  10. Method of making steel strapping and strip

    Energy Technology Data Exchange (ETDEWEB)

    Robert D. Reilly

    2000-02-16

    The technical progress obtained for this time frame consisted of the awarding of two contracts for determination of metallurgical parameters for heat treatment of strapping and strip which are unavailable from current technology and/or published data in this field. The two contractors were Bricmont, Inc. and the Department of Materials Science and Engineering at the Technological Institute of Northwestern University, Evanston, IL. Phase 1 of the two stage contract with Bricmont, Inc. which provided a computer analysis of the cooling rates of a typical range of thickness' of strapping was completed. This study was developed for the purpose of determining the time parameters for quenching low carbon steels to a martensitic microstructure within the time frame of the design of the proposed process. It also provides design criteria for cooling to ambient for the total process. This data is required for Phase 2 of the Bricmont proposal which completes the design and specifications of the total heat treating and cooling system for the process. This becomes the basis for developing the cost and space requirements for this component of the production line. The authors do not intend to award Phase 2 until the work done at Northwestern University discussed hereafter is completed. On or about May 1, 1999 a contract for a project entitled ``Effects of Steel Composition and Quench Rate on Microstructure and Mechanical Properties of Strapping'' to be performed at the Department of Materials Science and Engineering was awarded. The delay in initiating this project was due to the legal interpretation and final agreement of the intellectual provisions of the award by the author's attorneys, Northwestern's attorneys and the legal representative in the Chicago office of the DOE. The work to date includes rapid quenching of a number of different steel compositions and microstructure on an existing drop quench test apparatus. It was initially assumed that this

  11. The GENOTEND chip: a new tool to analyse gene expression in muscles of beef cattle for beef quality prediction.

    Science.gov (United States)

    Hocquette, Jean-Francois; Bernard-Capel, Carine; Vidal, Veronique; Jesson, Beline; Levéziel, Hubert; Renand, Gilles; Cassar-Malek, Isabelle

    2012-08-15

    Previous research programmes have described muscle biochemical traits and gene expression levels associated with beef tenderness. One of our results concerning the DNAJA1 gene (an Hsp40) was patented. This study aims to confirm the relationships previously identified between two gene families (heat shock proteins and energy metabolism) and beef quality. We developed an Agilent chip with specific probes for bovine muscular genes. More than 3000 genes involved in muscle biology or meat quality were selected from genetic, proteomic or transcriptomic studies, or from scientific publications. As far as possible, several probes were used for each gene (e.g. 17 probes for DNAJA1). RNA from Longissimus thoracis muscle samples was hybridised on the chips. Muscles samples were from four groups of Charolais cattle: two groups of young bulls and two groups of steers slaughtered in two different years. Principal component analysis, simple correlation of gene expression levels with tenderness scores, and then multiple regression analysis provided the means to detect the genes within two families (heat shock proteins and energy metabolism) which were the most associated with beef tenderness. For the 25 Charolais young bulls slaughtered in year 1, expression levels of DNAJA1 and other genes of the HSP family were related to the initial or overall beef tenderness. Similarly, expression levels of genes involved in fat or energy metabolism were related with the initial or overall beef tenderness but in the year 1 and year 2 groups of young bulls only. Generally, the genes individually correlated with tenderness are not consistent across genders and years indicating the strong influence of rearing conditions on muscle characteristics related to beef quality. However, a group of HSP genes, which explained about 40% of the variability in tenderness in the group of 25 young bulls slaughtered in year 1 (considered as the reference group), was validated in the groups of 30 Charolais young

  12. The GENOTEND chip: a new tool to analyse gene expression in muscles of beef cattle for beef quality prediction

    Directory of Open Access Journals (Sweden)

    Hocquette Jean-Francois

    2012-08-01

    Full Text Available Abstract Background Previous research programmes have described muscle biochemical traits and gene expression levels associated with beef tenderness. One of our results concerning the DNAJA1 gene (an Hsp40 was patented. This study aims to confirm the relationships previously identified between two gene families (heat shock proteins and energy metabolism and beef quality. Results We developed an Agilent chip with specific probes for bovine muscular genes. More than 3000 genes involved in muscle biology or meat quality were selected from genetic, proteomic or transcriptomic studies, or from scientific publications. As far as possible, several probes were used for each gene (e.g. 17 probes for DNAJA1. RNA from Longissimus thoracis muscle samples was hybridised on the chips. Muscles samples were from four groups of Charolais cattle: two groups of young bulls and two groups of steers slaughtered in two different years. Principal component analysis, simple correlation of gene expression levels with tenderness scores, and then multiple regression analysis provided the means to detect the genes within two families (heat shock proteins and energy metabolism which were the most associated with beef tenderness. For the 25 Charolais young bulls slaughtered in year 1, expression levels of DNAJA1 and other genes of the HSP family were related to the initial or overall beef tenderness. Similarly, expression levels of genes involved in fat or energy metabolism were related with the initial or overall beef tenderness but in the year 1 and year 2 groups of young bulls only. Generally, the genes individually correlated with tenderness are not consistent across genders and years indicating the strong influence of rearing conditions on muscle characteristics related to beef quality. However, a group of HSP genes, which explained about 40% of the variability in tenderness in the group of 25 young bulls slaughtered in year 1 (considered as the reference group, was

  13. Application of Technology on Improving Beef Cattle Productivity in East Nusa Tenggara

    Directory of Open Access Journals (Sweden)

    Wirdahayati R B

    2010-03-01

    Full Text Available The Province of East Nusa Tenggara (NTT had been one of the major beef cattle suppliers under traditional management system in Indonesia. The beef cattle farming that based on grazing native pasture and the introduction of shrub legumes (Leucaena leucocephala may contribute to around 15 – 50% of the farmers’ household income. In the last few years, supply of beef cattle tended to decline due to the decrease in cattle population in NTT. Some basic improvements in management and feeding toward increasing beef cattle productivities had been carried out in Nusa Tenggara, such as a baseline survey on Cattle Health and Productivity Survey (CHAPS conducted in 1990 – 1992. The objective of the program was to identify the existing beef cattle productivity and health condition throughout Nusa Tenggara. A collaborative research with the Ministry of Research and Technology (Integrated Prime Research had also been carried out and the result showed that early weaning in Bali calves that can be practised as early as 3 – 6 months to prevent calves losses during the dry season. A program of the Assessment on Beef Cattle Base Farming Activities had also been conducted to improve fattening and breeding practices through the improvement in beef cattle management and feeding systems. At the latest development, fattening scheme has been introduced under a partnership approach involving private sectors and cooperatives. This needs to be facilitated by the government to accelerate the program such as access to capital and intensive extension services to build farmers awareness toward profit oriented beef cattle farming. Optimalization of the available potential resources and technology in NTT, will be an opportunity to enhance beef cattle production and gains back the reputation as one of the major producing beef cattle in the past. This will also support the national livestock program nowadays, called Beef Cattle Self Sufficiency Program 2014.

  14. Potential to curb the environmental burdens of American beef consumption using a novel plant-based beef substitute.

    Directory of Open Access Journals (Sweden)

    Benjamin Goldstein

    Full Text Available The food demands of the United States (US impart significant environmental pressures. The high rate of consumption of beef has been shown to be the largest driver of food-borne greenhouse gas emissions, water use and land occupation in the US diet. The environmental benefits of substituting animal products with vegetal foods are well documented, but significant psychological barriers persist in reducing meat consumption. Here we use life cycle assessment to appraise the environmental performance of a novel vegetal protein source in the mean US diet where it replaces ground beef, and in vegetarian and vegan diets where it substitutes for legumes, tofu and other protein sources. We find that relative to the mean US diet, vegetarian and vegan diets significantly reduce per-capita food-borne greenhouse gas emission (32% and 67%, respectively, blue water use (70% and 75%, respectively and land occupation (70% and 79%, respectively, primarily in the form of rangeland. The substitution of 10%, 25% and 50% of ground beef with plant-based burger (PBB at the national scale results in substantial reductions in annual US dietary greenhouse gas emissions (4.55-45.42 Mt CO2 equivalents, water consumption (1.30-12.00 km3 and land occupation (22300-190100 km2. Despite PBB's elevated environmental pressures compared to other vegetal protein sources, we demonstrate that minimal risk exists for the disservices of PBB substitution in non-meat diets to outweigh the benefits of ground-beef substitution in the omnivorous American diet. Demand for plant-based oils in PBB production has the potential to increase land use pressures in biodiversity hotspots, though these could be obviated through responsible land stewardship. Although the apparent environmental benefits of the PBB are contingent on actual uptake of the product, this study demonstrates the potential for non-traditional protein substitutes to play a role in a transition towards more sustainable consumption

  15. Color, sensory and textural attributes of beef frankfurter, beef ham and meat-free sausage containing tomato pomace.

    Science.gov (United States)

    Savadkoohi, Sobhan; Hoogenkamp, Henk; Shamsi, Kambiz; Farahnaky, Asgar

    2014-08-01

    The present investigation focuses on the textural properties, sensory attributes and color changes of beef frankfurter, beef ham and meat-free sausage produced by different levels of bleached tomato pomace. The texture and color profile were performed using an instrumental texture analyzer and colorimeter. The findings indicated that tomato pomace-added sausages had higher water holding capacity (WHC) compared to that of commercial samples. The frankfurters containing 5 and 7% (w/w) tomato pomace had the highest redness (a*), chroma (C*) and color differences (ΔE) values, while the meat-free sausages containing 7% (w/w) tomato pomace had significant (p0.05) color differences between beef ham samples (with and without tomato pomace). A significant progression in the textural hardness and chewiness of systems containing tomato pomace was observed as well as higher sensory scores by panelists. According to sensorial evaluations, bleached tomato pomace improved the consumer acceptability and preference. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Theoretical study of H- stripping with a wiggler magnet

    International Nuclear Information System (INIS)

    Hutson, R.L.

    1991-01-01

    The first step for injecting protons into the LAMPF Proton Storage Ring (PSR) at LANL is to strip a beam of 800-MeV H - ions to H 0 with a 1.8-T dipole magnet. Because of the finite lifetime of energetic H - ions in the magnetic field, their trajectories bend before stripping causing the angular spread of the beam, and therefore its emittance, to grow during the stripping process. In the case of the PSR, the horizontal beam emittance grows by a factor of roughly three during injection. As a consequence, beam losses in the ring are significantly greater than they would be if there were not emittance growth. A speculative technique is proposed in which the beam divergence growth and resulting emittance growth is reduced by stripping the H - in a wiggler magnet whose transverse field alternates in direction as a function of position along the beam axis. The wiggler field configuration is adjusted so that the angular beam spread introduced during passage through one unidirectional-field increment of path is relatively small and so that 99.99% of the beam is stripped after passing through the whole magnet. With careful field design the net added angular beam spread is reduced because the incremental angular spreads are painted back and forth over the same small range. In the hypothetical case described, the calculated emittance growth and beam loss increase are significantly smaller than those calculated for a conventional stripper magnet. 3 refs., 3 figs

  17. Characterization and Calibration of Large Area Resistive Strip Micromegas Detectors

    CERN Document Server

    Losel, Philipp Jonathan; The ATLAS collaboration

    2015-01-01

    Resisitve strip Micromegas detectors behave discharge tolerant. They have been tested extensively as smaller detectors of about 10 x 10 cm$^2$ in size and they work reliably at high rates of 100\\,kHz/cm$^2$ and above. Tracking resolutions well below 100\\,$\\mu$m have been observed for 100 GeV muons and pions. Micromegas detectors are meanwhile proposed as large area muon precision trackers of 2-3\\,m$^2$ in size. To investigate possible differences between small and large detectors, a 1\\,m$^2$ detector with 2048 resistive strips at a pitch of 450 $\\mu$m was studied in the LMU Cosmic Ray Facility (CRF) using two 4 $\\times$ 2.2 m$^2$ large Monitored Drift Tube (MDT) chambers for cosmic muon reference tracking. Segmentation of the resistive strip anode plane in 57.6\\,mm x 95\\,mm large areas has been realized by the readout of 128 strips with one APV25 chip each and by 11 95\\,mm broad trigger scintillators placed along the readout strips.\\\\ This allows for mapping of homogenity in pulse height and efficiency, deter...

  18. Characterization and Calibration of Large Area Resistive Strip Micromegas Detectors

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00389527; The ATLAS collaboration

    2016-01-01

    Resistive strip Micromegas detectors are discharge tolerant. They have been tested extensively as small detectors of about 10 x 10 cm$^2$ in size and they work reliably at high rates of 100 kHz/cm$^2$ and above. Tracking resolution well below 100 $\\mu$m has been observed for 100 GeV muons and pions. Micromegas detectors are meanwhile proposed as large area muon precision trackers of 2-3 m$^2$ in size. To investigate possible differences between small and large detectors, a 1 m$^2$ detector with 2048 resistive strips at a pitch of 450 $\\mu$m was studied in the LMU Cosmic Ray Measurement Facility (CRMF) using two 4 $\\times$ 2.2 m$^2$ large Monitored Drift Tube (MDT) chambers for cosmic muon reference tracking. A segmentation of the resistive strip anode plane in 57.6 mm x 93 mm large areas has been realized by the readout of 128 strips with one APV25 chip each and by eleven 93 mm broad trigger scintillators placed along the readout strips. This allows for mapping of homogeneity in pulse height and efficiency, d...

  19. 78 FR 15645 - Mandatory Country of Origin Labeling of Beef, Pork, Lamb, Chicken, Goat Meat, Wild and Farm...

    Science.gov (United States)

    2013-03-12

    ... Labeling of Beef, Pork, Lamb, Chicken, Goat Meat, Wild and Farm-Raised Fish and Shellfish, Perishable...), lamb, chicken, goat, and pork; ground beef, ground lamb, ground chicken, ground goat, and ground pork... The baseline for this analysis is the present state of the beef, chicken, goat, lamb and pork...

  20. BIODIESEL DARI CAMPURAN LEMAK SAPI (Beef Tallow DAN MINYAK SAWIT

    Directory of Open Access Journals (Sweden)

    Wara Dyah Pita Rengga

    2013-05-01

    Full Text Available Cadangan minyak bumi semakin menipis, sehingga dicari bahan bakar alternatif, salah satunya adalah biodiesel. Minyak nabati terutama minyak sawit merupakan bahan baku edible sedangkan lemak sapi merupakan bahan baku non-edible dengan biaya rendah dan memiliki ketersediaan tinggi pada produksi sapi. Pemanfaatan lemak sapi yang belum maksimal dapat digunakan bersama minyak sawit untuk menghasilkan biodiesel. Lemak sapi dicairkan supaya menjadi minyak sapi. Bahan baku minyak sapi dan minyak sawit dicampur dengan perban-dingan 3:1. Campuran minyak ditransesterifikasi dengan metanol dengan perbandingan molar (1:6 dan katalis NaOH. Proses dilakukan selama 90 menit pada suhu ±65°C. Hasil proses transesterifikasi adalah metil ester dan gliserol. Metil ester pada lapisan atas dipisahkan dari gliserol kemudian dilakukan pencucian. Metil ester atau biodiesel selanjutnya diuji angka asam, viskositas, densitas, dan analisis menggunakan GC-MS. Yield biodiesel yang dihasilkan dari campuran minyak sapi dan minyak sawit adalah 76%, angka asam 0,67124 mg-KOH/g, densitas 857,76 kg/cm³, dan viskositas 3,0074 mm2/s. Kesemua parameter tersebut sesuai dengan standart mutu SNI biodiesel. Kandungan metil ester dari minyak sawit dan lemak sapi adalah metiloleat dan metil palmitat. The availability of the fossil fuel is decreasing; hence the finding of an alternative fuels is very important. One of those alternative fuels is biodiesel. Vegetable oil, especially palm oil is the edible raw material, while the beef tallow is the non-edible raw material with low cost production and the availability is huge in the cattle production. The beef tallow mixed with palm oil can be used as raw material for producing biodiesel. Firstly, the beef tallow was melted into beef oil. The raw materials of beef tallow and palm oil were mixed with the composition ratio of 3:1. The resulted mixed-oil was transesterificated by adding methanol with molar ratio of 1:6 and NaOH as

  1. Genotype x Nutritional Environment Interaction in a Composite Beef Cattle Breed

    Science.gov (United States)

    Environmental effects have been shown to influence several economically important traits in beef cattle. In this study, genetic x nutritional environment interaction has been evaluated in a composite beef cattle breed(50% Red Angus, 25% Charolais, 25% Tarentaise).Cows were randomly assigned to be fe...

  2. 9 CFR 319.312 - Pork with barbecue sauce and beef with barbecue sauce.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Pork with barbecue sauce and beef with barbecue sauce. 319.312 Section 319.312 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE..., Frozen, or Dehydrated Meat Food Products § 319.312 Pork with barbecue sauce and beef with barbecue sauce...

  3. Suckling behaviour and fertility in beef cows on pasture 2. Influence ...

    African Journals Online (AJOL)

    For two weeks prior to the start of the breeding season, the sucklingbehaviour of beef calves, separated from their dams for 12 h out of ..... BARB., C.R.. 1986. Naloxone infusion increases pulsatile luteinizing hormone release in post partum beef cows. Dom. Anim. Endocrin. 3, 49. WILLIAMS. G.L., KOTWICA. 1., SLANGER ...

  4. Improved pasture and herd management to reduce greenhouse gas emissions from a Brazilian beef production system

    NARCIS (Netherlands)

    Mazzetto, A.M.; Feigl, B.J.; Schils, R.L.M.; Cerri, C.E.P.; Cerri, C.C.

    2015-01-01

    Brazilian farms produce 15% of the world[U+05F3]s beef, and consequently they are important sources of greenhouse gases (GHG). The beef sector faces the challenge to meet the increasing demand without further increase of GHG emissions. To reduce the pressure on forests it is essential that

  5. Similarities and differences in composition and selected sensory attributes of reindeer, caribou and beef

    NARCIS (Netherlands)

    Rincker, P.J.; Bechtel, P.J.; Finstadt, G.; Buuren, Van R.G.C.; Killefer, J.; McKeith, F.K.

    2006-01-01

    The longissimus from caribou (n = 6), reindeer (n = 6) and beef (n = 6) were evaluated to determine differences in composition, color and sensory properties. Caribou contained the least fat followed by reindeer, and then beef (P <0.05). Both venison sources contained more heme pigment and had a

  6. Grazing supplementation and crop diversification on beef farm simulations in southern Brazil: a case study

    Science.gov (United States)

    Economics and environmental footprints of beef cattle raised on natural pasture or combined with soybean in specific biomes are still not well evaluated. The objective of this research was to simulate and evaluate the economics of three common pastured beef grazing systems in southern Brazil along w...

  7. Documentation of 50% water conservation in a single process at a beef abattoir

    Science.gov (United States)

    Beef slaughter is water intensive due to stringent food safety requirements. We conducted a study at a commercial beef processor to demonstrate water conservation by modifying the mechanical head wash. We documented the initial nozzle configuration (112 nozzles), water pressure (275 kPa), and flowra...

  8. NITROUS OXIDE EMISSIONS FROM SOUTHERN HIGH PLAINS BEEF CATTLE FEEDYARDS: MEASUREMENT AND MODELING

    Science.gov (United States)

    Predictive models for nitrous oxide emission are crucial for assessing the greenhouse gas footprint of beef cattle production. The Texas Panhandle produces approximately 42% of finished beef in the U.S. and cattle production is estimated to contribute 8 Tg carbon dioxide equivalents from nitrous oxi...

  9. Spatial variability in nitrous oxide and methane emissions from beef cattle feedyard pen surfaces

    Science.gov (United States)

    Greenhouse gas emissions from beef cattle feedlots include enteric carbon dioxide and methane, and manure-derived methane, nitrous oxide and carbon dioxide. Enteric methane comprises the largest portion of the greenhouse gas footprint of beef cattle feedyards. For the manure component, methane is th...

  10. Association of microRNAs with antibody response to mycoplasma bovis in beef cattle

    Science.gov (United States)

    The objective of this study was to identify microRNAs associated with a serum antibody response to Mycoplasma bovis in beef cattle. Serum from sixteen beef calves was collected at three points: in summer after calves were born, in fall at weaning, and in the following spring. All sera collected in t...

  11. Derivation of economic values for veal, beef and milk production traits using profit equations.

    NARCIS (Netherlands)

    Bekman, H.; Arendonk, van J.A.M.

    1993-01-01

    In this study profit equations for milk, veal and beef bull production were developed to obtain economic values for different traits. Veal and beef production were described in terms of fat and protein daily gain. For categorical traits, dystocia and carcass quality traits, economic values were

  12. Transcriptome differences in the rumen of beef steers with variation in feed intake and gain

    Science.gov (United States)

    Feed efficiency is an economically important trait in beef production. The rumen wall interacts with feed, microbial populations and volatile fatty acids important to ruminant nutrition indicating it may play a critical role in the beef steer’s ability to utilize feedstuffs efficiently. To identif...

  13. The effect of cinnamon bark (Cinnamomum burmanii) essential oil microcapsules on vacuumed ground beef quality

    Science.gov (United States)

    Brilliana, I. N.; Manuhara, G. J.; Utami, R.; Khasanah, L. U.

    2017-04-01

    Ground beef has a short shelf life because it is susceptible to damage due to microbial contamination and lipid oxidation. So some sort of preservation method such as refrigerated storage, vacuum packaging or natural preservative addition is needed to extend the shelf life of ground beef. A natural preservative that can be used as a food preservative is the cinnamon bark (Cinnamomum burmanii) essential oil microcapsules. The aim of the research was to determine the influence of a cinnamon bark essential oil microcapsules (0%;0.5% and 1% w/w of the ground beef) on the Total Plate Count (TPC), Thiobarbituric Acid (TBA), pH and color of ground beef during refrigerated storage (4±1°C). The result showed that cinnamon bark essential oil microcapsules affected the TPC, TBA, pH and color of ground beef. The addition of the cinnamon bark essential oil microcapsules on ground beef can inhibit microbial growth, inhibit lipid oxidation, inhibit discoloration and lowering pH of fresh ground beef during refrigerated storage compared to the control sample. The higher of the microcapsules were added, the higher the inhibition of microbial growth, lipid oxidation and discoloration of ground beef, indicating better preservation effects.

  14. Fatty acid profile of zebu beef cattle from the Central African sub ...

    African Journals Online (AJOL)

    Additionally, based on the polyunsaturated FA (PUFA) proportion, 13.9% of the total lipids and n-6/n-3 PUFA ratio, 1.95, consumption of beef from these breeds could be beneficial to human health. This is possibly owing to the pasture feeding and low fat content of the beef. Keywords: Intramuscular fat; fatty acid composition ...

  15. Documentation of 50% water conservation in a single process at a beef abattoir. Meat Science

    Science.gov (United States)

    Beef slaughter is water intensive due to stringent food safety requirements. We conducted a study at a commercial beef processor to demonstrate water conservation by modifying the mechanical head wash. We documented the initial nozzle configuration (112 nozzles), water pressure (275 kPa), and flowra...

  16. An environmental assessment of grass-finishing beef operations in Pennsylvania

    Science.gov (United States)

    Concern for the environmental sustainability of traditional beef production has increased consumer interest in alternatively produced beef products perceived to be more environmentally friendly. This includes those marketed under “grassfed beef” labels. However, little information exists on the env...

  17. The effects of degree of dark cutting on tenderness and sensory attributes of beef

    Science.gov (United States)

    The objective of this study was to determine the effect of degree of dark cutting (DC) on the tenderness, juiciness, and flavor attributes of beef. During carcass grading at a large U.S. commercial beef harvesting facility, DC carcasses (n = 160) and matching normal control (NC) carcasses (n = 160)...

  18. The effect of technology information on consumer expectations and liking of beef.

    Science.gov (United States)

    Van Wezemael, Lynn; Ueland, Øydis; Rødbotten, Rune; De Smet, Stefaan; Scholderer, Joachim; Verbeke, Wim

    2012-02-01

    European consumers increasingly attach value to process characteristics of food. Although beef technologies are hardly communicated to consumers, providing consumer-oriented information about technology application might increase perceived transparency and consumer acceptance. This study investigates how information about beef technologies influences consumer expectations and liking of beef. Beef consumers in Belgium (n = 108) and Norway (n = 110) participated in an information experiment combined with sensory testing in which each consumer tasted three beef muscles treated with different technologies: unprocessed tenderloin M. Psoas major, muscle profiled M. Infraspinatus, and marinated (by injection) M. Semitendinosus. The findings indicate that detailed information about beef technologies can enhance consumers' expectations and liking of beef. However, this effect differs between countries and beef technologies. Information becomes either less relevant when the product is actually tasted, as indicated by the findings in Norway, or more relevant when information is confirmed by own experience during tasting, as indicated by the findings in Belgium. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. An index for beef and veal characteristics in dairy cattle based on carcass traits.

    NARCIS (Netherlands)

    Werf, van der J.H.J.; Waaij, van der E.H.; Groen, A.F.; Jong, de G.

    1998-01-01

    Carcass data are nowadays routinely collected from Dutch slaughterhouses. The aim of this study was to develop a selection index for beef production traits in a dairy cattle population based upon such data. Records were available from three categories of animals: veal calves, beef bulls, and cows

  20. What Brings People to Leadership Roles: A Phenomenological Study of Beef Industry Leaders

    Science.gov (United States)

    Gordon, B. Lynn; Ellis, Jason D.

    2013-01-01

    Leadership has been deeply studied in the literature; however, little research exists studying the role of volunteer peer leaders in non-formalized leadership roles in membership-based organizations. This phenomenological study was designed to explore the experience of beef industry leaders in leadership roles. Twelve active beef industry…

  1. Nutrients Composition in Fit Snacks Made from Ostrich, Beef and Chicken Dried Meat.

    Science.gov (United States)

    Zdanowska-Sąsiadek, Żaneta; Marchewka, Joanna; Horbańczuk, Jarosław Olav; Wierzbicka, Agnieszka; Lipińska, Paulina; Jóźwik, Artur; Atanasov, Atanas G; Huminiecki, Łukasz; Sieroń, Aleksander; Sieroń, Karolina; Strzałkowska, Nina; Stelmasiak, Adrian; De Smet, Stefaan; Van Hecke, Thomas; Hoffman, Louwrens C

    2018-05-25

    The aim of the study was to compare three types of meat snacks made from ostrich, beef, and chicken meat in relation to their nutrients content including fat, fatty acids, heme iron, and peptides, like anserine and carnosine, from which human health may potentially benefit. Dry meat samples were produced, from one type of muscle, obtained from ostrich ( m. ambiens ), beef ( m. semimembranosus ), and broiler chicken meat ( m. pectoralis major ). The composition of dried ostrich, beef, and chicken meat, with and without spices was compared. We show that meat snacks made from ostrich, beef, and chicken meat were characterized by high concentration of nutrients including proteins, minerals (heme iron especially in ostrich, than in beef), biologically active peptides (carnosine-in beef, anserine-in ostrich then in chicken meat). The, beneficial to human health, n -3 fatty acids levels differed significantly between species. Moreover, ostrich jerky contained four times less fat as compared to beef and half of that in chicken. In conclusion we can say that dried ostrich, beef, and chicken meat could be a good source of nutritional components.

  2. Nutrients Composition in Fit Snacks Made from Ostrich, Beef and Chicken Dried Meat

    Directory of Open Access Journals (Sweden)

    Żaneta Zdanowska-Sąsiadek

    2018-05-01

    Full Text Available The aim of the study was to compare three types of meat snacks made from ostrich, beef, and chicken meat in relation to their nutrients content including fat, fatty acids, heme iron, and peptides, like anserine and carnosine, from which human health may potentially benefit. Dry meat samples were produced, from one type of muscle, obtained from ostrich (m. ambiens, beef (m. semimembranosus, and broiler chicken meat (m. pectoralis major. The composition of dried ostrich, beef, and chicken meat, with and without spices was compared. We show that meat snacks made from ostrich, beef, and chicken meat were characterized by high concentration of nutrients including proteins, minerals (heme iron especially in ostrich, than in beef, biologically active peptides (carnosine—in beef, anserine—in ostrich then in chicken meat. The, beneficial to human health, n-3 fatty acids levels differed significantly between species. Moreover, ostrich jerky contained four times less fat as compared to beef and half of that in chicken. In conclusion we can say that dried ostrich, beef, and chicken meat could be a good source of nutritional components.

  3. Impact of "raised without antibiotics" beef cattle production practices on occurrences of antimicrobial resistance

    Science.gov (United States)

    The specific antimicrobial resistance (AMR) decreases that can be expected from reducing antimicrobial (AM) use in U.S. beef production have not been defined. To address this data gap, feces were recovered from 36 lots of “raised without antibiotics” (RWA) and 36 lots of “conventional” (CONV) beef c...

  4. Measurement of soy contents in ground beef using near-infrared spectroscopy

    Science.gov (United States)

    Models for determining contents of soy products in ground beef were developed using near-infrared (NIR) spectroscopy. Samples were prepared by mixing four kinds of soybean protein products (Arconet, toasted soy grits, Profam and textured vegetable protein (TVP)) with ground beef (content from 0%–100...

  5. 01 Nsoso - A survey of traditional beef cattle farmers....…

    African Journals Online (AJOL)

    annaline

    The aims of this survey were to characterise traditional beef cattle farmers and evaluate the adoption of certain improved ... The survey was conducted from March 2002 to October 2002. Beef cattle farmers from fifty (50) .... The most important advantages of using AI in traditional farming in Botswana is that it would lead to ...

  6. Temperament affects rangeland use patterns and reproductive performance of beef cows

    Science.gov (United States)

    • The American beef industry is paying more attention to cattle temperament, but studies examining relationships between temperaments and grazing behavior or animal performance on rangelands are limited. • We studied range beef cow temperaments using the behavioral syndromes framework. Cows classifi...

  7. Intensive vs. free-range organic beef. A preference study through consumer liking and conjoint analysis.

    Science.gov (United States)

    García-Torres, S; López-Gajardo, A; Mesías, F J

    2016-04-01

    This paper evaluates consumer liking and preferences towards organic beef from two production systems allowed by EU regulation: i) free-range and ii) intensive (fattened in feed-lot with organic feedstuff) as compared with conventionally produced beef. Data were obtained in April-May 2014 with a sample of 150 regular beef consumers who completed two tasks: firstly a sensory test where consumers tasted and rated the meats and secondly a conjoint analysis to study beef purchasing preferences. Willingness-to-pay for the different meats was also calculated from conjoint results. Results show that consumers preferred organic-from-concentrate beef at sensory level while organic beef from animals fed on grass was preferred when process characteristics (i.e. farming system) or attributes perceived at the point of purchase (i.e. colour) were evaluated. It was also found that the price-premium for organic beef is over 40%, with organic-fed-on grass beef preferred slightly over that fed-on-concentrate. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Phonon thermal conductance of disordered graphene strips with armchair edges

    International Nuclear Information System (INIS)

    Shi Lipeng; Xiong Shijie

    2009-01-01

    Based on the model of lattice dynamics together with the transfer matrix technique, we investigate the thermal conductances of phonons in quasi-one-dimensional disordered graphene strips with armchair edges using Landauer formalism for thermal transport. It is found that the contributions to thermal conductance from the phonon transport near von Hove singularities is significantly suppressed by the presence of disorder, on the contrary to the effect of disorder on phonon modes in other frequency regions. Besides the magnitude, for different widths of the strips, the thermal conductance also shows different temperature dependence. At low temperatures, the thermal conductance displays quantized features of both pure and disordered graphene strips implying that the transmission of phonon modes at low frequencies are almost unaffected by the disorder

  9. Efficiency measurements for 3D silicon strip detectors

    Energy Technology Data Exchange (ETDEWEB)

    Parzefall, Ulrich, E-mail: ulrich.parzefall@physik.uni-freiburg.d [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Dalla Betta, Gian-Franco [INFN Trento and Universita di Trento, via Sommarive 14, 38050 Povo di Trento (Italy); Boscardin, Maurizio [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy); Eckert, Simon [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Eklund, Lars; Fleta, Celeste [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Jakobs, Karl; Koehler, Michael; Kuehn, Susanne; Pahn, Gregor [Physikalisches Institut, Universitaet Freiburg, Hermann-Herder-Str. 3, D-79104 Freiburg (Germany); Parkes, Chris; Pennicard, David [University of Glasgow, Department of Physics and Astronomy, Glasgow G12 8QQ (United Kingdom); Ronchin, Sabina [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy); Zoboli, Andrea [INFN Trento and Universita di Trento, via Sommarive 14, 38050 Povo di Trento (Italy); Zorzi, Nicola [FBK-irst, Center for Materials and Microsystems, via Sommarive 18, 38050 Povo di Trento (Italy)

    2010-11-01

    Silicon strip detectors are widely used as part of the inner tracking layers in particle physics experiments. For applications at the luminosity upgrade of the Large Hadron Collider (LHC), the sLHC, silicon detectors with extreme radiation hardness are required. The 3D detector design, where electrodes are processed from underneath the strips into the silicon bulk material, provides a way to enhance the radiation tolerance of standard planar silicon strip detectors. Detectors with several innovative 3D designs that constitute a simpler and more cost-effective processing than the 3D design initially proposed were connected to read-out electronics from LHC experiments and subsequently tested. Results on the amount of charge collected, the noise and the uniformity of charge collection are given.

  10. Compton recoil electron tracking with silicon strip detectors

    International Nuclear Information System (INIS)

    O'Neill, T.J.; Ait-Ouamer, F.; Schwartz, I.; Tumer, O.T.; White, R.S.; Zych, A.D.

    1992-01-01

    The application of silicon strip detectors to Compton gamma ray astronomy telescopes is described in this paper. The Silicon Compton Recoil Telescope (SCRT) tracks Compton recoil electrons in silicon strip converters to provide a unique direction for Compton scattered gamma rays above 1 MeV. With strip detectors of modest positional and energy resolutions of 1 mm FWHM and 3% at 662 keV, respectively, 'true imaging' can be achieved to provide an order of magnitude improvement in sensitivity to 1.6 x 10 - 6 γ/cm 2 -s at 2 MeV. The results of extensive Monte Carlo calculations of recoil electrons traversing multiple layers of 200 micron silicon wafers are presented. Multiple Coulomb scattering of the recoil electron in the silicon wafer of the Compton interaction and the next adjacent wafer is the basic limitation to determining the electron's initial direction

  11. Performance studies of the CMS Strip Tracker before installation

    CERN Document Server

    Adam, Wolfgang; Dragicevic, Marko; Friedl, Markus; Fruhwirth, R; Hansel, S; Hrubec, Josef; Krammer, Manfred; Oberegger, Margit; Pernicka, Manfred; Schmid, Siegfried; Stark, Roland; Steininger, Helmut; Uhl, Dieter; Waltenberger, Wolfgang; Widl, Edmund; Van Mechelen, Pierre; Cardaci, Marco; Beaumont, Willem; de Langhe, Eric; de Wolf, Eddi A; Delmeire, Evelyne; Hashemi, Majid; Bouhali, Othmane; Charaf, Otman; Clerbaux, Barbara; Dewulf, Jean-Paul; Elgammal, Sherif; Hammad, Gregory Habib; de Lentdecker, Gilles; Marage, Pierre Edouard; Vander Velde, Catherine; Vanlaer, Pascal; Wickens, John; Adler, Volker; Devroede, Olivier; De Weirdt, Stijn; D'Hondt, Jorgen; Goorens, Robert; Heyninck, Jan; Maes, Joris; Mozer, Matthias Ulrich; Tavernier, Stefaan; Van Lancker, Luc; Van Mulders, Petra; Villella, Ilaria; Wastiels, C; Bonnet, Jean-Luc; Bruno, Giacomo; De Callatay, Bernard; Florins, Benoit; Giammanco, Andrea; Gregoire, Ghislain; Keutgen, Thomas; Kcira, Dorian; Lemaitre, Vincent; Michotte, Daniel; Militaru, Otilia; Piotrzkowski, Krzysztof; Quertermont, L; Roberfroid, Vincent; Rouby, Xavier; Teyssier, Daniel; Daubie, Evelyne; Anttila, Erkki; Czellar, Sandor; Engstrom, Pauli; Harkonen, J; Karimaki, V; Kostesmaa, J; Kuronen, Auli; Lampen, Tapio; Linden, Tomas; Luukka, Panja-Riina; Maenpaa, T; Michal, Sebastien; Tuominen, Eija; Tuominiemi, Jorma; Ageron, Michel; Baulieu, Guillaume; Bonnevaux, Alain; Boudoul, Gaelle; Chabanat, Eric; Chabert, Eric Christian; Chierici, Roberto; Contardo, Didier; Della Negra, Rodolphe; Dupasquier, Thierry; Gelin, Georges; Giraud, Noël; Guillot, Gérard; Estre, Nicolas; Haroutunian, Roger; Lumb, Nicholas; Perries, Stephane; Schirra, Florent; Trocme, Benjamin; Vanzetto, Sylvain; Agram, Jean-Laurent; Blaes, Reiner; Drouhin, Frédéric; Ernenwein, Jean-Pierre; Fontaine, Jean-Charles; Berst, Jean-Daniel; Brom, Jean-Marie; Didierjean, Francois; Goerlach, Ulrich; Graehling, Philippe; Gross, Laurent; Hosselet, J; Juillot, Pierre; Lounis, Abdenour; Maazouzi, Chaker; Olivetto, Christian; Strub, Roger; Van Hove, Pierre; Anagnostou, Georgios; Brauer, Richard; Esser, Hans; Feld, Lutz; Karpinski, Waclaw; Klein, Katja; Kukulies, Christoph; Olzem, Jan; Ostapchuk, Andrey; Pandoulas, Demetrios; Pierschel, Gerhard; Raupach, Frank; Schael, Stefan; Schwering, Georg; Sprenger, Daniel; Thomas, Maarten; Weber, Markus; Wittmer, Bruno; Wlochal, Michael; Beissel, Franz; Bock, E; Flugge, G; Gillissen, C; Hermanns, Thomas; Heydhausen, Dirk; Jahn, Dieter; Kaussen, Gordon; Linn, Alexander; Perchalla, Lars; Poettgens, Michael; Pooth, Oliver; Stahl, Achim; Zoeller, Marc Henning; Buhmann, Peter; Butz, Erik; Flucke, Gero; Hamdorf, Richard Helmut; Hauk, Johannes; Klanner, Robert; Pein, Uwe; Schleper, Peter; Steinbruck, G; Blum, P; De Boer, Wim; Dierlamm, Alexander; Dirkes, Guido; Fahrer, Manuel; Frey, Martin; Furgeri, Alexander; Hartmann, Frank; Heier, Stefan; Hoffmann, Karl-Heinz; Kaminski, Jochen; Ledermann, Bernhard; Liamsuwan, Thiansin; Muller, S; Muller, Th; Schilling, Frank-Peter; Simonis, Hans-Jürgen; Steck, Pia; Zhukov, Valery; Cariola, P; De Robertis, Giuseppe; Ferorelli, Raffaele; Fiore, Luigi; Preda, M; Sala, Giuliano; Silvestris, Lucia; Tempesta, Paolo; Zito, Giuseppe; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Giordano, Domenico; Maggi, Giorgio; Manna, Norman; My, Salvatore; Selvaggi, Giovanna; Albergo, Sebastiano; Chiorboli, Massimiliano; Costa, Salvatore; Galanti, Mario; Giudice, Nunzio; Guardone, Nunzio; Noto, Francesco; Potenza, Renato; Saizu, Mirela Angela; Sparti, V; Sutera, Concetta; Tricomi, Alessia; Tuve, Cristina; Brianzi, Mirko; Civinini, Carlo; Maletta, Fernando; Manolescu, Florentina; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Broccolo, B; Ciulli, Vitaliano; D'Alessandro, Raffaello; Focardi, Ettore; Frosali, Simone; Genta, Chiara; Landi, Gregorio; Lenzi, Piergiulio; Macchiolo, Anna; Magini, Nicolo; Parrini, Giuliano; Scarlini, Enrico; Cerati, Giuseppe Benedetto; Azzi, Patrizia; Bacchetta, Nicola; Candelori, Andrea; Dorigo, Tommaso; Kaminsky, A; Karaevski, S; Khomenkov, Volodymyr; Reznikov, Sergey; Tessaro, Mario; Bisello, Dario; De Mattia, Marco; Giubilato, Piero; Loreti, Maurizio; Mattiazzo, Serena; Nigro, Massimo; Paccagnella, Alessandro; Pantano, Devis; Pozzobon, Nicola; Tosi, Mia; Bilei, Gian Mario; Checcucci, Bruno; Fano, Livio; Servoli, Leonello; Ambroglini, Filippo; Babucci, Ezio; Benedetti, Daniele; Biasini, Maurizio; Caponeri, Benedetta; Covarelli, Roberto; Giorgi, Marco; Lariccia, Paolo; Mantovani, Giancarlo; Marcantonini, Marta; Postolache, Vasile; Santocchia, Attilio; Spiga, Daniele; Bagliesi, Giuseppe; Balestri, Gabriele; Berretta, Luca; Bianucci, S; Boccali, Tommaso; Bosi, Filippo; Bracci, Fabrizio; Castaldi, Rino; Ceccanti, Marco; Cecchi, Roberto; Cerri, Claudio; Cucoanes, Andi Sebastian; Dell'Orso, Roberto; Dobur, Didar; Dutta, Suchandra; Giassi, Alessandro; Giusti, Simone; Kartashov, Dmitry; Kraan, Aafke; Lomtadze, Teimuraz; Lungu, George-Adrian; Magazzu, Guido; Mammini, Paolo; Mariani, Filippo; Martinelli, Giovanni; Moggi, Andrea; Palla, Fabrizio; Palmonari, Francesco; Petragnani, Giulio; Profeti, Alessandro; Raffaelli, Fabrizio; Rizzi, Domenico; Sanguinetti, Giulio; Sarkar, Subir; Sentenac, Daniel; Serban, Alin Titus; Slav, Adrian; Soldani, A; Spagnolo, Paolo; Tenchini, Roberto; Tolaini, Sergio; Venturi, Andrea; Verdini, Piero Giorgio; Vos, Marcel; Zaccarelli, Luciano; Avanzini, Carlo; Basti, Andrea; Benucci, Leonardo; Bocci, Andrea; Cazzola, Ugo; Fiori, Francesco; Linari, Stefano; Massa, Maurizio; Messineo, Alberto; Segneri, Gabriele; Tonelli, Guido; Azzurri, Paolo; Bernardini, Jacopo; Borrello, Laura; Calzolari, Federico; Foa, Lorenzo; Gennai, Simone; Ligabue, Franco; Petrucciani, Giovanni; Rizzi, Andrea; Yang, Zong-Chang; Benotto, Franco; Demaria, Natale; Dumitrache, Floarea; Farano, R; Borgia, Maria Assunta; Castello, Roberto; Costa, Marco; Migliore, Ernesto; Romero, Alessandra; Abbaneo, Duccio; Abbas, M; Ahmed, Ijaz; Akhtar, I; Albert, Eric; Bloch, Christoph; Breuker, Horst; Butt, Shahid Aleem; Buchmuller, Oliver; Cattai, Ariella; Delaere, Christophe; Delattre, Michel; Edera, Laura Maria; Engstrom, Pauli; Eppard, Michael; Gateau, Maryline; Gill, Karl; Giolo-Nicollerat, Anne-Sylvie; Grabit, Robert; Honma, Alan; Huhtinen, Mika; Kloukinas, Kostas; Kortesmaa, Jarmo; Kottelat, Luc-Joseph; Kuronen, Auli; Leonardo, Nuno; Ljuslin, Christer; Mannelli, Marcello; Masetti, Lorenzo; Marchioro, Alessandro; Mersi, Stefano; Michal, Sebastien; Mirabito, Laurent; Muffat-Joly, Jeannine; Onnela, Antti; Paillard, Christian; Pal, Imre; Pernot, Jean-Francois; Petagna, Paolo; Petit, Patrick; Piccut, C; Pioppi, Michele; Postema, Hans; Ranieri, Riccardo; Ricci, Daniel; Rolandi, Gigi; Ronga, Frederic Jean; Sigaud, Christophe; Syed, A; Siegrist, Patrice; Tropea, Paola; Troska, Jan; Tsirou, Andromachi; Vander Donckt, Muriel; Vasey, François; Alagoz, Enver; Amsler, Claude; Chiochia, Vincenzo; Regenfus, Christian; Robmann, Peter; Rochet, Jacky; Rommerskirchen, Tanja; Schmidt, Alexander; Steiner, Stefan; Wilke, Lotte; Church, Ivan; Cole, Joanne; Coughlan, John A; Gay, Arnaud; Taghavi, S; Tomalin, Ian R; Bainbridge, Robert; Cripps, Nicholas; Fulcher, Jonathan; Hall, Geoffrey; Noy, Matthew; Pesaresi, Mark; Radicci, Valeria; Raymond, David Mark; Sharp, Peter; Stoye, Markus; Wingham, Matthew; Zorba, Osman; Goitom, Israel; Hobson, Peter R; Reid, Ivan; Teodorescu, Liliana; Hanson, Gail; Jeng, Geng-Yuan; Liu, Haidong; Pasztor, Gabriella; Satpathy, Asish; Stringer, Robert; Mangano, Boris; Affolder, K; Affolder, T; Allen, Andrea; Barge, Derek; Burke, Samuel; Callahan, D; Campagnari, Claudio; Crook, A; D'Alfonso, Mariarosaria; Dietch, J; Garberson, Jeffrey; Hale, David; Incandela, H; Incandela, Joe; Jaditz, Stephen; Kalavase, Puneeth; Kreyer, Steven Lawrence; Kyre, Susanne; Lamb, James; Mc Guinness, C; Mills, C; Nguyen, Harold; Nikolic, Milan; Lowette, Steven; Rebassoo, Finn; Ribnik, Jacob; Richman, Jeffrey; Rubinstein, Noah; Sanhueza, S; Shah, Yousaf Syed; Simms, L; Staszak, D; Stoner, J; Stuart, David; Swain, Sanjay Kumar; Vlimant, Jean-Roch; White, Dean; Ulmer, Keith; Wagner, Stephen Robert; Bagby, Linda; Bhat, Pushpalatha C; Burkett, Kevin; Cihangir, Selcuk; Gutsche, Oliver; Jensen, Hans; Johnson, Mark; Luzhetskiy, Nikolay; Mason, David; Miao, Ting; Moccia, Stefano; Noeding, Carsten; Ronzhin, Anatoly; Skup, Ewa; Spalding, William J; Spiegel, Leonard; Tkaczyk, Slawek; Yumiceva, Francisco; Zatserklyaniy, Andriy; Zerev, E; Anghel, Ioana Maria; Bazterra, Victor Eduardo; Gerber, Cecilia Elena; Khalatian, S; Shabalina, Elizaveta; Baringer, Philip; Bean, Alice; Chen, Jie; Hinchey, Carl Louis; Martin, Christophe; Moulik, Tania; Robinson, Richard; Gritsan, Andrei; Lae, Chung Khim; Tran, Nhan Viet; Everaerts, Pieter; Hahn, Kristan Allan; Harris, Philip; Nahn, Steve; Rudolph, Matthew; Sung, Kevin; Betchart, Burton; Demina, Regina; Gotra, Yury; Korjenevski, Sergey; Miner, Daniel Carl; Orbaker, Douglas; Christofek, Leonard; Hooper, Ryan; Landsberg, Greg; Nguyen, Duong; Narain, Meenakshi; Speer, Thomas; Tsang, Ka Vang

    2009-01-01

    In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber optics, power supplies, and electronics intended for the operation at the LHC. A local chiller was used to circulate the coolant for low temperature operation. In order to understand the efficiency and alignment of the strip tracker modules, a cosmic ray trigger was implemented. From March through July 4.5 million triggers were recorded. This period, referred to as the Sector Test, provided practical experience with the operation of the Tracker, especially safety, data acquisition, power, and cooling systems. This paper describes the performance of the strip system during the Sector Test, which consisted of five distinct periods defined by the coolant temperature. Significant emphasis is placed on comparisons between the data and results from Monte Carlo studies.

  12. Modelling of beef sensory quality for a better prediction of palatability.

    Science.gov (United States)

    Hocquette, Jean-François; Van Wezemael, Lynn; Chriki, Sghaier; Legrand, Isabelle; Verbeke, Wim; Farmer, Linda; Scollan, Nigel D; Polkinghorne, Rod; Rødbotten, Rune; Allen, Paul; Pethick, David W

    2014-07-01

    Despite efforts by the industry to control the eating quality of beef, there remains a high level of variability in palatability, which is one reason for consumer dissatisfaction. In Europe, there is still no reliable on-line tool to predict beef quality and deliver consistent quality beef to consumers. Beef quality traits depend in part on the physical and chemical properties of the muscles. The determination of these properties (known as muscle profiling) will allow for more informed decisions to be made in the selection of individual muscles for the production of value-added products. Therefore, scientists and professional partners of the ProSafeBeef project have brought together all the data they have accumulated over 20 years. The resulting BIF-Beef (Integrated and Functional Biology of Beef) data warehouse contains available data of animal growth, carcass composition, muscle tissue characteristics and beef quality traits. This database is useful to determine the most important muscle characteristics associated with a high tenderness, a high flavour or generally a high quality. Another more consumer driven modelling tool was developed in Australia: the Meat Standards Australia (MSA) grading scheme that predicts beef quality for each individual muscle×specific cooking method combination using various information on the corresponding animals and post-slaughter processing factors. This system has also the potential to detect variability in quality within muscles. The MSA system proved to be effective in predicting beef palatability not only in Australia but also in many other countries. The results of the work conducted in Europe within the ProSafeBeef project indicate that it would be possible to manage a grading system in Europe similar to the MSA system. The combination of the different modelling approaches (namely muscle biochemistry and a MSA-like meat grading system adapted to the European market) is a promising area of research to improve the prediction

  13. Distillation and Air Stripping Designs for the Lunar Surface

    Science.gov (United States)

    Boul, Peter J.; Lange, Kevin E.; Conger, Bruce; Anderson, Molly

    2009-01-01

    Air stripping and distillation are two different gravity-based methods, which may be applied to the purification of wastewater on the lunar base. These gravity-based solutions to water processing are robust physical separation techniques, which may be advantageous to many other techniques for their simplicity in design and operation. The two techniques can be used in conjunction with each other to obtain high purity water. The components and feed compositions for modeling waste water streams are presented in conjunction with the Aspen property system for traditional stage distillation models and air stripping models. While the individual components for each of the waste streams will vary naturally within certain bounds, an analog model for waste water processing is suggested based on typical concentration ranges for these components. Target purity levels for the for recycled water are determined for each individual component based on NASA s required maximum contaminant levels for potable water Distillation processes are modeled separately and in tandem with air stripping to demonstrate the potential effectiveness and utility of these methods in recycling wastewater on the Moon. Optimum parameters such as reflux ratio, feed stage location, and processing rates are determined with respect to the power consumption of the process. Multistage distillation is evaluated for components in wastewater to determine the minimum number of stages necessary for each of 65 components in humidity condensate and urine wastewater mixed streams. Components of the wastewater streams are ranked by Henry s Law Constant and the suitability of air stripping in the purification of wastewater in terms of component removal is evaluated. Scaling factors for distillation and air stripping columns are presented to account for the difference in the lunar gravitation environment. Commercially available distillation and air stripping units which are considered suitable for Exploration Life Support

  14. Silicon strip detector qualification for the CMS experiment

    International Nuclear Information System (INIS)

    Kaussen, Gordon

    2008-01-01

    To provide the best spatial resolution for the particle trajectory reconstruction and a very fast readout, the inner tracking system of CMS is build up of silicon detectors with a pixel tracker in the center surrounded by a strip tracker. The silicon strip tracker consists of so-called modules representing the smallest detection unit of the tracking device. These modules are mounted on higher-level structures called shells in the tracker inner barrel (TIB), rods in the tracker outer barrel (TOB), disks in the tracker inner disks (TID) and petals in the tracker end caps (TEC). The performance of the participating two shells of the TIB, four rods of the TOB and two petals of the TEC (representing about 1% of the final strip tracker) could be studied in different magnetic fields over a period of approximately two month using cosmic muon signals. The last test before inserting the tracker in the CMS experiment was the Tracker Slice Test performed in spring/summer 2007 at the Tracker Integration Facility (TIF) at CERN after installing all subdetectors in the tracker support tube. Approximately 25% of the strip tracker +z side was powered and read out using a cosmic ray trigger built up of scintillation counters. In total, about 5 million muon events were recorded under various operating conditions. These events together with results from commissioning runs were used to study the detector response like cluster charges, signal-to-noise ratios and single strip noise behaviour as well as to identify faulty channels which turned out to be in the order of a few per mille. The performance of the silicon strip tracker during these different construction stages is discussed in this thesis with a special emphasis on the tracker end caps. (orig.)

  15. Silicon strip detector qualification for the CMS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kaussen, Gordon

    2008-10-06

    To provide the best spatial resolution for the particle trajectory reconstruction and a very fast readout, the inner tracking system of CMS is build up of silicon detectors with a pixel tracker in the center surrounded by a strip tracker. The silicon strip tracker consists of so-called modules representing the smallest detection unit of the tracking device. These modules are mounted on higher-level structures called shells in the tracker inner barrel (TIB), rods in the tracker outer barrel (TOB), disks in the tracker inner disks (TID) and petals in the tracker end caps (TEC). The performance of the participating two shells of the TIB, four rods of the TOB and two petals of the TEC (representing about 1% of the final strip tracker) could be studied in different magnetic fields over a period of approximately two month using cosmic muon signals. The last test before inserting the tracker in the CMS experiment was the Tracker Slice Test performed in spring/summer 2007 at the Tracker Integration Facility (TIF) at CERN after installing all subdetectors in the tracker support tube. Approximately 25% of the strip tracker +z side was powered and read out using a cosmic ray trigger built up of scintillation counters. In total, about 5 million muon events were recorded under various operating conditions. These events together with results from commissioning runs were used to study the detector response like cluster charges, signal-to-noise ratios and single strip noise behaviour as well as to identify faulty channels which turned out to be in the order of a few per mille. The performance of the silicon strip tracker during these different construction stages is discussed in this thesis with a special emphasis on the tracker end caps. (orig.)

  16. ISM stripping from cluster galaxies and inhomogeneities in cooling flows

    Science.gov (United States)

    Soker, Noam; Bregman, Joel N.; Sarazin, Craig L.

    1990-01-01

    Analyses of the x ray surface brightness profiles of cluster cooling flows suggest that the mass flow rate decreases towards the center of the cluster. It is often suggested that this decrease results from thermal instabilities, in which denser blobs of gas cool rapidly and drop below x ray emitting temperatures. If the seeds for the thermal instabilities are entropy perturbations, these perturbations must enter the flow already in the nonlinear regime. Otherwise, the blobs would take too long to cool. Here, researchers suggest that such nonlinear perturbations might start as blobs of interstellar gas which are stripped out of cluster galaxies. Assuming that most of the gas produced by stellar mass loss in cluster galaxies is stripped from the galaxies, the total rate of such stripping is roughly M sub Interstellar Matter (ISM) approx. 100 solar mass yr(-1). It is interesting that the typical rates of cooling in cluster cooling flows are M sub cool approx. 100 solar mass yr(-1). Thus, it is possible that a substantial portion of the cooling gas originates as blobs of interstellar gas stripped from galaxies. The magnetic fields within and outside of the low entropy perturbations can help to maintain their identities, both by suppressing thermal conduction and through the dynamical effects of magnetic tension. One significant question concerning this scenario is: Why are cooling flows seen only in a fraction of clusters, although one would expect gas stripping to be very common. It may be that the density perturbations only survive and cool efficiently in clusters with a very high intracluster gas density and with the focusing effect of a central dominant galaxy. Inhomogeneities in the intracluster medium caused by the stripping of interstellar gas from galaxies can have a number of other effects on clusters. For example, these density fluctuations may disrupt the propagation of radio jets through the intracluster gas, and this may be one mechanism for producing Wide

  17. Experimental evidence that wildflower strips increase pollinator visits to crops.

    Science.gov (United States)

    Feltham, Hannah; Park, Kirsty; Minderman, Jeroen; Goulson, Dave

    2015-08-01

    Wild bees provide a free and potentially diverse ecosystem service to farmers growing pollination-dependent crops. While many crops benefit from insect pollination, soft fruit crops, including strawberries are highly dependent on this ecosystem service to produce viable fruit. However, as a result of intensive farming practices and declining pollinator populations, farmers are increasingly turning to commercially reared bees to ensure that crops are adequately pollinated throughout the season. Wildflower strips are a commonly used measure aimed at the conservation of wild pollinators. It has been suggested that commercial crops may also benefit from the presence of noncrop flowers; however, the efficacy and economic benefits of sowing flower strips for crops remain relatively unstudied. In a study system that utilizes both wild and commercial pollinators, we test whether wildflower strips increase the number of visits to adjacent commercial strawberry crops by pollinating insects. We quantified this by experimentally sowing wildflower strips approximately 20 meters away from the crop and recording the number of pollinator visits to crops with, and without, flower strips. Between June and August 2013, we walked 292 crop transects at six farms in Scotland, recording a total of 2826 pollinators. On average, the frequency of pollinator visits was 25% higher for crops with adjacent flower strips compared to those without, with a combination of wild and commercial bumblebees (Bombus spp.) accounting for 67% of all pollinators observed. This effect was independent of other confounding effects, such as the number of flowers on the crop, date, and temperature. Synthesis and applications. This study provides evidence that soft fruit farmers can increase the number of pollinators that visit their crops by sowing inexpensive flower seed mixes nearby. By investing in this management option, farmers have the potential to increase and sustain pollinator populations over time.

  18. Failure of irradiated beef and ham to induce genetic aberrations of Drosophila

    International Nuclear Information System (INIS)

    Mittler, S.

    1979-01-01

    Ham that had been irradiated by electrons and beef which had been exposed to gamma rays from 60 Co were fed to Drosophila melanogaster to determine whether meat sterilized by these methods would induce genetic aberrations. The results showed that for yB/sc 8 y + Y males, fed on irradiated ham or beef, thermally preserved beef or frozen beef for their entire larval life, there was no significant increase in the loss of X or Y chromosomes or non-disjunction of these chromosomes; there was also no significant increase in any of the broods. Similarly for the Oregon R males, there was no significant increase in yield of sex-linked recessive lethals. Thus feeding of irradiated ham and beef to Drosophila males did not induce significant increases in genetic aberrations. The present findings are discussed in relation to the conflicting results of previous studies. (U.K.)

  19. Sequencing and Characterization of Divergent Marbling Levels in the Beef Cattle ( Muscle Transcriptome

    Directory of Open Access Journals (Sweden)

    Dong Chen

    2015-02-01

    Full Text Available Marbling is an important trait regarding the quality of beef. Analysis of beef cattle transcriptome and its expression profile data are essential to extend the genetic information resources and would support further studies on beef cattle. RNA sequencing was performed in beef cattle using the Illumina High-Seq2000 platform. Approximately 251.58 million clean reads were generated from a high marbling (H group and low marbling (L group. Approximately 80.12% of the 19,994 bovine genes (protein coding were detected in all samples, and 749 genes exhibited differential expression between the H and L groups based on fold change (>1.5-fold, p<0.05. Multiple gene ontology terms and biological pathways were found significantly enriched among the differentially expressed genes. The transcriptome data will facilitate future functional studies on marbling formation in beef cattle and may be applied to improve breeding programs for cattle and closely related mammals.

  20. Relationship between colorimetric (instrumental) evaluation and consumer-defined beef colour acceptability.

    Science.gov (United States)

    Holman, Benjamin W B; Mao, Yanwei; Coombs, Cassius E O; van de Ven, Remy J; Hopkins, David L

    2016-11-01

    The relationship between instrumental colorimetric values (L*, a*, b*, the ratio of reflectance at 630nm and 580nm) and consumer perception of acceptable beef colour was evaluated using a web-based survey and standardised photographs of beef m. longissimus lumborum with known colorimetrics. Only L* and b* were found to relate to average consumer opinions of beef colour acceptability. Respondent nationality was also identified as a source of variation in beef colour acceptability score. Although this is a preliminary study with the findings necessitating additional investigation, these results suggest L* and b* as candidates for developing instrumental thresholds for consumer beef colour expectations. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.