Print a Bed Bug Card - (Single Cards)

Science.gov (United States)

Two sets of business-card-sized lists of tips for recognizing bed bugs and the signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

Bed Bugs FAQs

Science.gov (United States)

... Europe. Bed bugs have been found in five-star hotels and resorts and their presence is not ... Health – Division of Parasitic Diseases Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs ...

Role of vision and mechanoreception in bed bug, Cimex lectularius L. behavior.

Directory of Open Access Journals (Sweden)

Narinderpal Singh

Full Text Available The role of olfactory cues such as carbon dioxide, pheromones, and kairomones in bed bug, Cimex lectularius L. behavior has been demonstrated. However, the role of vision and mechanoreception in bed bug behavior is poorly understood. We investigated bed bug vision by determining their responses to different colors, vertical objects, and their ability to detect colors and vertical objects under low and complete dark conditions. Results show black and red paper harborages are preferred compared to yellow, green, blue, and white harborages. A bed bug trapping device with a black or red exterior surface was significantly more attractive to bed bugs than that with a white exterior surface. Bed bugs exhibited strong orientation behavior toward vertical objects. The height (15 vs. 30 cm tall and color (brown vs. black of the vertical object had no significant effect on orientation behavior of bed bugs. Bed bugs could differentiate color and detect vertical objects at very low background light conditions, but not in complete darkness. Bed bug preference to different substrate textures (mechanoreception was also explored. Bed bugs preferred dyed tape compared to painted tape, textured painted plastic, and felt. These results revealed that substrate color, presence of vertical objects, and substrate texture affect host-seeking and harborage-searching behavior of bed bugs. Bed bugs may use a combination of vision, mechanoreception, and chemoreception to locate hosts and seek harborages.

Bed Bug Clearinghouse by Type of Resource

Science.gov (United States)

This information is to help states, communities, and consumers prevent and control bed bug infestations. These brochures, fact sheets, manuals, posters, checklists, videos, and more provide guidance such as hotel room inspection and pesticide safety.

Getting Rid of Bed Bugs

Science.gov (United States)

... Directory Planning, Budget and Results Jobs and Internships Headquarters Offices Regional Offices Labs and Research Centers Bed ... to be careful in how you select a company. Related Information Collaborative Strategy on Bed Bugs - highlights ...

EPA-Registered Bed Bug Products

Science.gov (United States)

... rest or hide in hampers, bed frames, even furniture); Failing to treat adjacent areas where bed bugs ... to work (some pesticides, such as desiccators or growth regulators, may be very effective but take some ...

Bed Bug Myths

Science.gov (United States)

Learn the truth about bed bugs, such as how easy they are to see with the naked eye, their preferred habitat, whether they transmit diseases, their public health effects, and whether pesticides are the best way to deal with an infestation.

Prevalence of bed bug (Cimex lectularius in human settlement area of Bahnamir, Iran

Directory of Open Access Journals (Sweden)

Seyyed Farzad Motevalli Haghi

2014-09-01

Full Text Available Objective: To survey the factors concerning with bed bugs epidemiology among human settlement area of Bahnamir, Iran in 2012-2013. Methods: Bed bugs were collected from 500 households which lived in eight villages in suburban areas. After random cluster classification, we checked their houses to collect information on presence of bed bugs. When bed bugs infestation revealed, they were preserved in properly labeled specimen containing 70% alcohol. Bugs were transferred to the Faculty of Health and identified by stereomicroscopy. A questionnaire was filled by the owners. The recorded data were coded and analyzed statistically using the Chi-square test. Results: In the study area, 14 from 500 families were infested by bed bugs which revealed almost 2.8% of infestation in that area. Five infested villages had shown 62.50% infestation. From the total of 256 caught bugs, 56.45%, 31.25%, 8.59%, and 3.91% was separated from bedroom, setting room, kitchen and other parts of the infested houses, respectively. Regarding to 256 trapped bugs in the bedroom, 33.2% were immature (nymph and 66.8% were mature. Conclusions: The results illustrated the role of education and guidance of the owners towards improving personal hygiene and public health with using insecticides to control by professional persons, not using secondhand instrument in the home and washing sheets and blankets and drying on suitable hot drier in order to reduce the infestation rate of bed bug among human settlement.

Field Study of the Comparative Efficacy of Three Pyrethroid/Neonicotinoid Mixture Products for the Control of the Common Bed Bug, Cimex lectularius

Directory of Open Access Journals (Sweden)

Changlu Wang

2015-03-01

Full Text Available Three insecticide mixtures that contain two classes of insecticides (pyrethroid and neonicotinoid were recently developed to control bed bugs. We evaluated three integrated bed bug management strategies in apartments, each using the same non-chemical control methods and one of the three insecticide mixture products: Tandem (lambda-cyhalothrin + thiamethoxam, Temprid SC (beta-cyfluthrin + imidacloprid, and Transport Mikron (bifenthrin + acetamiprid. No insecticides were applied in the Control apartments. In all apartments, we installed vinyl mattress encasements (if not already present and applied steam to beds and other infested upholstered furniture. Insecticide sprays were applied in the three treatments. Each treatment and the Control included 8–10 occupied apartments. Re-treatment was conducted during biweekly inspections if necessary. After eight weeks, the mean (± SEM bed bug count reduction in the Tandem, Temprid SC, Transport Mikron, and Control was 89 ± 9, 87 ± 6, 98 ± 1, and 23 ± 54%, respectively. Only Tandem and Transport Mikron treatments resulted in significantly higher population reduction than the Control at eight weeks. There were no significant differences in mean percent reduction among the three treatments (Tandem, Temprid SC, Transport Mikron at eight weeks. Tandem spray caused significantly faster bed bug reduction than Temprid SC spray and Transport Mikron spray.

Toxicities of Selected Essential Oils, Silicone Oils, and Paraffin Oil against the Common Bed Bug (Hemiptera: Cimicidae).

Science.gov (United States)

Zha, Chen; Wang, Changlu; Li, Andrew

2018-02-09

The common bed bug [Cimex lectularius L. (Hemiptera: Cimicidae)] and tropical bed bug [Cimex hemipterus F. (Hemiptera: Cimicidae)] resurged in the United States and many other countries over the past decades. The need for safe and effective bed bug control products propelled the development of numerous 'green insecticides', mostly with essential oils listed as active ingredients. Various inorganic and organic oils also were used for bed bug management. However, there are no published studies on their toxicities against bed bugs. In this study, we screened 18 essential oils, three silicone oils, and paraffin oil (C5-20 paraffins) for their toxicities against bed bugs. All the oils exhibited insecticidal activity in topical assays. Their toxicities varied significantly; all of the evaluated essential oils were less effective than silicone oils and paraffin oil. The LD50 values of the most effective essential oil (blood orange), paraffin oil, and the most effective silicone oil (dodecamethylpentasiloxane) are 0.184 ± 0.018, 0.069 ± 0.012, and 0.036 ± 0.005 mg per bug, respectively. Direct spray of 1% water solution of 3-[hydroxy (polyethyleneoxy) propyl] heptamethyltrisiloxane, the only silicone oil that mixes well with water, resulted in 92% bed bug mortality after 1 d. Results of this study indicate silicone oils and paraffin oil have the potential to be used as safer alternative bed bug control materials. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Bed Bug Epidemic: A Challenge to Public Health

Science.gov (United States)

Ratnapradipa, Dhitinut; Ritzel, Dale O.; Haramis, Linn D.; Bliss, Kadi R.

2011-01-01

In recent years, reported cases of bed bug infestations in the U.S. and throughout the world have escalated dramatically, posing a global public health problem. Although bed bugs are not known to transmit disease to humans, they pose both direct and indirect public health challenges in terms of health effects, treatment, cost, and resource…

Status of Urban Bed Bug Infestations in Southern China: An Analysis of Pest Control Service Records in Shenzhen in 2012 and Dongguan in 2013.

Science.gov (United States)

Wang, Lei; Cai, Xuquan; Xu, Yijuan

2015-01-01

The recent resurgence of bed bugs (Cimex spp.) in many developed countries has drawn increasing attention worldwide. The status of urban bed bug infestations were investigated in Shenzhen and Dongguan, two major cities in southern Guangdong Province of southern China, based on pest control service records from two different companies (one during 2012 and another during 2013). The results showed that Shenzhen and Dongguan have a severe problem with bed bug infestations: the control of bed bugs is a constant concern, except during the winter. In Shenzhen, a similar number of premises were treated for bed bugs in central business districts and suburban districts. However, in Dongguan, more premises were treated for bed bugs in suburban districts than in central business districts. The treatment rate for worker sleeping quarters, apartments, hotel, and private houses in Shenzhen was 53.8, 43.0, 1.9, and 1.3%, respectively. The percentage of treated rooms was 56.1% for worker sleeping quarters and 91.1% for apartments. In Dongguan, the treatment rate for worker sleeping quarters, apartments, hotel, and private houses was 90.0, 10.0, 0.0, and 0.0%, respectively. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Essential oils as fumigants for bed bugs (Hemiptera: Cimicidae)

Science.gov (United States)

In Petri dish assays, fumigation of a pyrethroid-susceptible strain of bed bugs Cimex lectularius L. (Hemiptera: Cimicidae) with various essential oils resulted in mortality that approached or equaled 100%, after 5 days. However, when bed bugs were exposed to the same essential oils in sealed, comme...

How to Find Bed Bugs

Science.gov (United States)

Find and correctly identify an infestation early before it becomes widespread. Look for rusty or reddish stains and pinpoint dark spots on bed sheets or mattresses, and search for bugs near the piping, seams and tags of the mattress and box spring.

Insecticide resistance and resistance mechanisms in bed bugs, Cimex spp. (Hemiptera: Cimicidae).

Science.gov (United States)

Dang, Kai; Doggett, Stephen L; Veera Singham, G; Lee, Chow-Yang

2017-06-29

The worldwide resurgence of bed bugs [both Cimex lectularius L. and Cimex hemipterus (F.)] over the past two decades is believed in large part to be due to the development of insecticide resistance. The transcriptomic and genomic studies since 2010, as well as morphological, biochemical and behavioral studies, have helped insecticide resistance research on bed bugs. Multiple resistance mechanisms, including penetration resistance through thickening or remodelling of the cuticle, metabolic resistance by increased activities of detoxification enzymes (e.g. cytochrome P450 monooxygenases and esterases), and knockdown resistance by kdr mutations, have been experimentally identified as conferring insecticide resistance in bed bugs. Other candidate resistance mechanisms, including behavioral resistance, some types of physiological resistance (e.g. increasing activities of esterases by point mutations, glutathione S-transferase, target site insensitivity including altered AChEs, GABA receptor insensitivity and altered nAChRs), symbiont-mediated resistance and other potential, yet undiscovered mechanisms may exist. This article reviews recent studies of resistance mechanisms and the genes governing insecticide resistance, potential candidate resistance mechanisms, and methods of monitoring insecticide resistance in bed bugs. This article provides an insight into the knowledge essential for the development of both insecticide resistance management (IRM) and integrated pest management (IPM) strategies for successful bed bug management.

Effectiveness of a Reduced-Risk Insecticide Based Bed Bug Management Program in Low-Income Housing

Directory of Open Access Journals (Sweden)

Narinderpal Singh

2013-11-01

Full Text Available Bed bug (Cimex lectularius L. infestations are becoming increasingly common in low-income communities. Once they are introduced, elimination is very difficult. As part of the efforts to develop effective and safe bed bug management programs, we conducted a laboratory study evaluating the efficacy of a reduced-risk insecticide—Alpine aerosol (0.5% dinotefuran. We then conducted a field evaluation of a reduced-risk insecticide based integrated pest management (IPM program in low-income family apartments with young children. In laboratory evaluations, direct spray and 5 min exposure to dry Alpine aerosol residue caused 100.0 ± 0.0 and 91.7 ± 8.3% mortality to bed bug nymphs, respectively. Direct Alpine aerosol spray killed 91.3 ± 4.3% of the eggs. The IPM program included education, steam, bagging infested linens, placing intercepting devices under furniture legs and corners of rooms, applying Alpine aerosol and Alpine dust (0.25% dinotefuran, 95% diatomaceous earth dust, and regularly scheduled monitoring and re-treatment. Nine apartments ranging from 1–1,428 (median: 29 bed bugs based on visual inspection and Climbup interceptor counts were included. Over a 6-month period, an average 172 g insecticide (Alpine aerosol + Alpine dust was used in each apartment, a 96% reduction in pesticide usage compared to chemical only treatment reported in a similar environment. The IPM program resulted in an average of 96.8 ± 2.2% reduction in the number of bed bugs. However, elimination of bed bugs was only achieved in three lightly infested apartments (<30 bed bugs at the beginning. Elimination success was closely correlated with the level of bed bug populations.

Toxicity of selected essential oils, silicone oils, and paraffino oil against the common bed bug, cimex lectularius L. (Hemiptera: Cimicidae)

Science.gov (United States)

The common bed bug (Cimex lectularius L.) resurged in the U.S. and many other countries over the past decade. The need for safe and effective bed bug control products propelled the development of numerous “green pesticides”, mostly with essential oils listed as active ingredients. Various inorganic ...

Effects of Starvation on Deltamethrin Tolerance in Bed Bugs, Cimex lectularius L. (Hemiptera: Cimicidae

Directory of Open Access Journals (Sweden)

Zachary C. DeVries

2015-01-01

Full Text Available Bed bugs, Cimex lectularius L., are a major pest in the urban environment. Their presence often results in physical, psychological, and financial distress of homeowners and apartment dwellers. Although many insecticide bioassays have been performed on this pest, little attention has been paid to bed bug feeding status, which is closely linked to metabolism, molting, and mass. Therefore, we evaluated the toxicity of topically applied deltamethrin on insecticide susceptible adult male bed bugs fed 2 d, 9 d, and 21 d prior to testing. When toxicity was evaluated on a “per-bug” basis, there was no difference between 2 d [LD50 = 0.498 (0.316 − 0.692 ng·bug−1] and 9 d [LD50 = 0.572 (0.436 − 0.724 ng·bug−1] starved bugs, while 21 d starved bugs had a significantly lower LD50 [0.221 (0.075 − 0.386 ng·bug−1]. When toxicity was evaluated in terms of body mass, 9 d starved bugs had the highest LD50 values [0.138 (0.102 − 0.176 ng·mg−1], followed by 2 d starved bugs [0.095 (0.060 − 0.134 ng·mg−1], and then 21 d starved bugs [0.058 (0.019–0.102 ng·mg−1]; the LD50 values of 2 d and 9 d starved bugs were significantly different from 21 d starved bugs. These results indicate that feeding status plays an important role in the toxicity of deltamethrin. In addition, the lack of differences between 2 d and 9 d starved bugs indicate that the blood meal itself has little impact on tolerance, but rather it is some physiological change following feeding that confers increased tolerance to bed bugs.

Real-Time Measurement of Volatile Chemicals Released by Bed Bugs during Mating Activities

DEFF Research Database (Denmark)

Kilpinen, Ole Østerlund; Liu, Dezhao; Adamsen, Anders Peter

2012-01-01

In recent years, bed bug (Hemiptera: Cimicidae) problems have increased dramatically in many parts of the world, leading to a renewed interest in their chemical ecology. Most studies of bed bug semiochemicals have been based on the collection of volatiles over a period of time followed by chemical...

Stress Tolerance of Bed Bugs: A Review of Factors That Cause Trauma to Cimex lectularius and C. Hemipterus

Directory of Open Access Journals (Sweden)

Joshua B. Benoit

2011-04-01

Full Text Available Recent emergence of bed bugs (Cimex spp. has prompted a significant expansion of research devoted to this pest. The ability to survive and recover from stress has significant implications on the distribution and survival of insects, and bed bugs are no exception. Research on bed bug stress tolerance has shown considerable progress and necessitates a review on this topic. Bed bugs have an extraordinary ability to resist dehydration between bloodmeals, and this represents a critical factor allowing their prolonged survival when no host is available. High relative humidities are detrimental to bed bugs, leading to reduced survival in comparison to those held at lower relative humidities. Continual exposure of bed bugs, eggs and mobile stages, to temperatures below freezing and short term exposure (=1 h to temperatures below −16 to −18 °C results in mortality. The upper thermal limit for short term exposure of eggs, nymphs and adults is between 40–45 °C for the common (Cimex lectularius and tropical (C. hemipterus bed bugs. Long-term exposure to temperatures above 35 °C results in significant reduction in survival of mobile bed bugs. Eggs for C. lectularius and C. hemipterus are no longer viable when held below 10 °C or above 37 °C throughout embryogenesis. Blood feeding, although necessary for survival and reproduction, is discussed as a stress due to thermal and osmotic fluctuations that result from ingesting a warm bloodmeal from a vertebrate host. Cold, heat, water stress and blood feeding prompted the expression of heat shock proteins (Hsps. Pesticide application is a common human-induced stress for urban pests, and recent studies have documented pesticide resistance in many bed bug populations. High levels of traumatic insemination (mating of bed bugs has been linked to reduced survival and fecundity along with possibly exposing individuals to microbial infections after cuticular penetration by the paramere (=male reproductive organ

Interactions among Carbon Dioxide, Heat, and Chemical Lures in Attracting the Bed Bug, Cimex lectularius L. (Hemiptera: Cimicidae

Directory of Open Access Journals (Sweden)

Narinderpal Singh

2012-01-01

Full Text Available Commercial bed bug (Cimex lectularius L. monitors incorporating carbon dioxide (CO2, heat, and chemical lures are being used for detecting bed bugs; however, there are few reported studies on the effectiveness of chemical lures in bed bug monitors and the interactions among chemical lure, CO2, and heat. We screened 12 chemicals for their attraction to bed bugs and evaluated interactions among chemical lures, CO2, and heat. The chemical lure mixture consisting of nonanal, 1-octen-3-ol, spearmint oil, and coriander Egyptian oil was found to be most attractive to bed bugs and significantly increased the trap catches in laboratory bioassays. Adding this chemical lure mixture when CO2 was present increased the trap catches compared with traps baited with CO2 alone, whereas adding heat did not significantly increase trap catches when CO2 was present. Results suggest a combination of chemical lure and CO2 is essential for designing effective bed bug monitors.

76 FR 550 - Second National Bed Bug Summit; Notice of Public Meeting

Science.gov (United States)

2011-01-05

... identify knowledge gaps and barriers to effective community-wide bed bug control; propose the next steps in addressing knowledge gaps and eliminating barriers; and develop a framework for addressing the highest... many areas of the country. As this resilient pest has become a nationwide problem affecting hotels...

Hiring a Pest Management Professional for Bed Bugs

Science.gov (United States)

If you hire someone to treat your bed bug infestation, make sure they use Integrated Pest Management (IPM) techniques, check credentials, and know they may need multiple visits, to take apart furniture, and to use vacuums, heat, and pesticides.

Unique features of a global human ectoparasite identified through sequencing of the bed bug genome.

Science.gov (United States)

Benoit, Joshua B; Adelman, Zach N; Reinhardt, Klaus; Dolan, Amanda; Poelchau, Monica; Jennings, Emily C; Szuter, Elise M; Hagan, Richard W; Gujar, Hemant; Shukla, Jayendra Nath; Zhu, Fang; Mohan, M; Nelson, David R; Rosendale, Andrew J; Derst, Christian; Resnik, Valentina; Wernig, Sebastian; Menegazzi, Pamela; Wegener, Christian; Peschel, Nicolai; Hendershot, Jacob M; Blenau, Wolfgang; Predel, Reinhard; Johnston, Paul R; Ioannidis, Panagiotis; Waterhouse, Robert M; Nauen, Ralf; Schorn, Corinna; Ott, Mark-Christoph; Maiwald, Frank; Johnston, J Spencer; Gondhalekar, Ameya D; Scharf, Michael E; Peterson, Brittany F; Raje, Kapil R; Hottel, Benjamin A; Armisén, David; Crumière, Antonin Jean Johan; Refki, Peter Nagui; Santos, Maria Emilia; Sghaier, Essia; Viala, Sèverine; Khila, Abderrahman; Ahn, Seung-Joon; Childers, Christopher; Lee, Chien-Yueh; Lin, Han; Hughes, Daniel S T; Duncan, Elizabeth J; Murali, Shwetha C; Qu, Jiaxin; Dugan, Shannon; Lee, Sandra L; Chao, Hsu; Dinh, Huyen; Han, Yi; Doddapaneni, Harshavardhan; Worley, Kim C; Muzny, Donna M; Wheeler, David; Panfilio, Kristen A; Vargas Jentzsch, Iris M; Vargo, Edward L; Booth, Warren; Friedrich, Markus; Weirauch, Matthew T; Anderson, Michelle A E; Jones, Jeffery W; Mittapalli, Omprakash; Zhao, Chaoyang; Zhou, Jing-Jiang; Evans, Jay D; Attardo, Geoffrey M; Robertson, Hugh M; Zdobnov, Evgeny M; Ribeiro, Jose M C; Gibbs, Richard A; Werren, John H; Palli, Subba R; Schal, Coby; Richards, Stephen

2016-02-02

The bed bug, Cimex lectularius, has re-established itself as a ubiquitous human ectoparasite throughout much of the world during the past two decades. This global resurgence is likely linked to increased international travel and commerce in addition to widespread insecticide resistance. Analyses of the C. lectularius sequenced genome (650 Mb) and 14,220 predicted protein-coding genes provide a comprehensive representation of genes that are linked to traumatic insemination, a reduced chemosensory repertoire of genes related to obligate hematophagy, host-symbiont interactions, and several mechanisms of insecticide resistance. In addition, we document the presence of multiple putative lateral gene transfer events. Genome sequencing and annotation establish a solid foundation for future research on mechanisms of insecticide resistance, human-bed bug and symbiont-bed bug associations, and unique features of bed bug biology that contribute to the unprecedented success of C. lectularius as a human ectoparasite.

Unique features of a global human ectoparasite identified through sequencing of the bed bug genome

Science.gov (United States)

Benoit, Joshua B.; Adelman, Zach N.; Reinhardt, Klaus; Dolan, Amanda; Poelchau, Monica; Jennings, Emily C.; Szuter, Elise M.; Hagan, Richard W.; Gujar, Hemant; Shukla, Jayendra Nath; Zhu, Fang; Mohan, M.; Nelson, David R.; Rosendale, Andrew J.; Derst, Christian; Resnik, Valentina; Wernig, Sebastian; Menegazzi, Pamela; Wegener, Christian; Peschel, Nicolai; Hendershot, Jacob M.; Blenau, Wolfgang; Predel, Reinhard; Johnston, Paul R.; Ioannidis, Panagiotis; Waterhouse, Robert M.; Nauen, Ralf; Schorn, Corinna; Ott, Mark-Christoph; Maiwald, Frank; Johnston, J. Spencer; Gondhalekar, Ameya D.; Scharf, Michael E.; Peterson, Brittany F.; Raje, Kapil R.; Hottel, Benjamin A.; Armisén, David; Crumière, Antonin Jean Johan; Refki, Peter Nagui; Santos, Maria Emilia; Sghaier, Essia; Viala, Sèverine; Khila, Abderrahman; Ahn, Seung-Joon; Childers, Christopher; Lee, Chien-Yueh; Lin, Han; Hughes, Daniel S. T.; Duncan, Elizabeth J.; Murali, Shwetha C.; Qu, Jiaxin; Dugan, Shannon; Lee, Sandra L.; Chao, Hsu; Dinh, Huyen; Han, Yi; Doddapaneni, Harshavardhan; Worley, Kim C.; Muzny, Donna M.; Wheeler, David; Panfilio, Kristen A.; Vargas Jentzsch, Iris M.; Vargo, Edward L.; Booth, Warren; Friedrich, Markus; Weirauch, Matthew T.; Anderson, Michelle A. E.; Jones, Jeffery W.; Mittapalli, Omprakash; Zhao, Chaoyang; Zhou, Jing-Jiang; Evans, Jay D.; Attardo, Geoffrey M.; Robertson, Hugh M.; Zdobnov, Evgeny M.; Ribeiro, Jose M. C.; Gibbs, Richard A.; Werren, John H.; Palli, Subba R.; Schal, Coby; Richards, Stephen

2016-01-01

The bed bug, Cimex lectularius, has re-established itself as a ubiquitous human ectoparasite throughout much of the world during the past two decades. This global resurgence is likely linked to increased international travel and commerce in addition to widespread insecticide resistance. Analyses of the C. lectularius sequenced genome (650 Mb) and 14,220 predicted protein-coding genes provide a comprehensive representation of genes that are linked to traumatic insemination, a reduced chemosensory repertoire of genes related to obligate hematophagy, host–symbiont interactions, and several mechanisms of insecticide resistance. In addition, we document the presence of multiple putative lateral gene transfer events. Genome sequencing and annotation establish a solid foundation for future research on mechanisms of insecticide resistance, human–bed bug and symbiont–bed bug associations, and unique features of bed bug biology that contribute to the unprecedented success of C. lectularius as a human ectoparasite. PMID:26836814

Comparison of ingestion and topical application of insecticides against the common bed bug, Cimex lectularius (Hemiptera: Cimicidae)

Science.gov (United States)

Sierras, Angela; Schal, Coby

2016-01-01

Background The global prevalence of Cimex lectularius infestations has challenged current intervention efforts, as pyrethroid resistance has become ubiquitous, availability of labeled insecticides for bed bugs is limited, and non-chemical treatment options, such as heat, are often unaffordable. We evaluated representative insecticides toward the goal of developing a novel, ingestible liquid bait for hematophagous arthropods. Results LC50 values were estimated for adult males and first instar nymphs of an insecticide-susceptible strain for abamectin, clothianidin, fipronil and indoxacarb, after ingestion from an in vitro feeder. LD50 values were calculated based on the ingested blood volume. Ingested abamectin, clothianidin and fipronil caused rapid mortality in both life stages. Fipronil was ∼43-fold more effective by ingestion than by topical application. Indoxacarb and its bioactive metabolite decarbomethoxyllated JW062 (DCJW) were ineffective at causing bed bug mortality even at concentrations as high as 1000 ng mL−1 blood. Conclusions Fipronil, clothianidin and abamectin have potential for being incorporated into a liquid bait for bed bug control; indoxacarb and DCJW were not effective. Bed bugs are a good candidate for an ingestible liquid bait because systemic formulations generally require less active ingredient than residual sprays, they remain contained and more effectively target hematophagous arthropods. PMID:27766740

Evaluation of cimi-shield knock-out bed bug eliminator against house fly (Musca domestica) adults.

Science.gov (United States)

Cimi-Shield Knock-Out (CSKO) Bed Bug Eliminator is a green treatment labeled for use against bed bugs, carpet beetles, ants, roaches, fleas, ticks, silverfish, millipedes and centipedes. The active ingredient is soybean oil. If CSKO is formulated according to label instructions and sprayed directly ...

Protecting Yourself from Bed Bugs in Public Places

Science.gov (United States)

... office. By reducing clutter in your workplace or school, you provide fewer places for the bed bugs to hide and fewer opportunities for them to hitchhike to your home. Keep your ... office or school, consider storing your belongings in a plastic bin. ...

Bullous reactions to bed bug bites reflect cutaneous vasculitis

Science.gov (United States)

This study evaluates bullous cutaneous reactions and sequential histopathology in an individual sensitized to bed bug bites in an effort to better understand the allergic response and histology associated with these bites. There was a progression of the inflammatory response across time ranging from...

Detection of Reduced Susceptibility to Chlorfenapyr- and Bifenthrin-Containing Products in Field Populations of the Bed Bug (Hemiptera: Cimicidae).

Science.gov (United States)

Ashbrook, Aaron R; Scharf, Michael E; Bennett, Gary W; Gondhalekar, Ameya D

2017-06-01

Insecticide resistance is a major impediment for effective control of Cimex lectularius L. Previous resistance detection studies with bed bugs have focused on certain pyrethroid, neonicotinoid, organochlorine, organophosphate, and carbamate insecticides. Within the pyrethroid class, resistance studies have mostly been limited to deltamethrin, lambda-cyhalothrin, and alpha- and beta-cyfluthrin. The goal of this study was to develop diagnostic concentration bioassays for assessing bed bug susceptibility levels to chlorfenapyr- and bifenthrin-containing products. First, glass vial and filter paper bioassay methods were compared for their utility in susceptibility monitoring. Statistical comparison of toxicity data between bioassays indicated that the vial assay was less confounded by assay susbtrate effects, required less insecticide, and was faster, especially for chlorfenapyr. Next, using vial diagnostic concentrations (LC99) for each insecticide, 10 laboratory-adapted field strains and the Harlan lab-susceptible strain were screened for susceptibility to chlorfenapyr and bifenthrin. The results of this study reveal recent bed bug susceptibility levels to certain chlorfenapyr- and bifenthrin-containing products. Reduced susceptibility was detected in three and five field strains to chlorfenapyr and bifenthrin, respectively. Detection of reduced susceptibility suggests that certain strains may be segregating toward greater chlorfenapyr and bifenthrin resistance. These results merit continuous resistance monitoring efforts to detect chlorfenapyr and bifenthrin susceptibility shifts. Additionally, to reduce insecticide selection pressures and delay resistance development, adoption of integrated bed bug control strategies that combine chemical and nonchemical methods is recommended. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Climbing ability of teneral and sclerotized adult bed bugs and assessment of adhesive properties of the exoskeletal fluid using atomic force microscopy.

Directory of Open Access Journals (Sweden)

Kevin R Hinson

Full Text Available We observed that teneral adults (72 h, and sclerotized group 2 (S2 bed bugs (n = 30, height climbed = 2.64 cm at >72 h post molt. When heights from all climbing events were summed, teneral bed bugs (650.8 cm climbed differed significantly (P< 0.01 from recently sclerotized (82 cm climbed and sclerotized (group 1 = 104.6 cm climbed, group 2 = 107.8 cm climbed bed bugs. These findings suggested that the external surface of teneral bed bug exoskeletons possess an adhesive property. Using atomic force microscopy (AFM, we found that adhesion force of an exoskeletal (presumably molting fluid decreased almost five-fold from 88 to 17 nN within an hour of molting. Our findings may have implications for laboratory safety and the effectiveness of bed bug traps, barriers, and biomimetic-based adhesives.

Bed Bug (Cimex lectularius L. Population Composition as Determined by Baited Traps

Directory of Open Access Journals (Sweden)

Elizabeth J. Schaafsma

2012-04-01

Full Text Available Two established field populations of bed bugs were sampled using host-mimicking traps baited with a combination of CO2, heat and a synthetic kairomone. The proportion of first instar nymphs (between 52% and 78% of all captured insects was significantly higher than reported in previous studies, which had employed different sampling methods. The proportion of adults was correspondingly much lower than previously reported, between 5% and 7% of total capture. As many as 120 bed bugs were captured in a single trap in one night; the variation in catches between sampling locations within the same room and between days at the same location indicates that multiple nights of trapping may be required to obtain an accurate representation of population structure.

RNA interference of NADPH-cytochrome P450 reductase results in reduced insecticide resistance in the bed bug, Cimex lectularius.

Science.gov (United States)

Zhu, Fang; Sams, Sarah; Moural, Tim; Haynes, Kenneth F; Potter, Michael F; Palli, Subba R

2012-01-01

NADPH-cytochrome P450 reductase (CPR) plays a central role in cytochrome P450 action. The genes coding for P450s are not yet fully identified in the bed bug, Cimex lectularius. Hence, we decided to clone cDNA and knockdown the expression of the gene coding for CPR which is suggested to be required for the function of all P450s to determine whether or not P450s are involved in resistance of bed bugs to insecticides. The full length Cimex lectularius CPR (ClCPR) cDNA was isolated from a deltamethrin resistant bed bug population (CIN-1) using a combined PCR strategy. Bioinformatics and in silico modeling were employed to identify three conserved binding domains (FMN, FAD, NADP), a FAD binding motif, and the catalytic residues. The critical amino acids involved in FMN, FAD, NADP binding and their putative functions were also analyzed. No signal peptide but a membrane anchor domain with 21 amino acids which facilitates the localization of ClCPR on the endoplasmic reticulum was identified in ClCPR protein. Phylogenetic analysis showed that ClCPR is closer to the CPR from the body louse, Pediculus humanus corporis than to the CPRs from the other insect species studied. The ClCPR gene was ubiquitously expressed in all tissues tested but showed an increase in expression as immature stages develop into adults. We exploited the traumatic insemination mechanism of bed bugs to inject dsRNA and successfully knockdown the expression of the gene coding for ClCPR. Suppression of the ClCPR expression increased susceptibility to deltamethrin in resistant populations but not in the susceptible population of bed bugs. These data suggest that P450-mediated metabolic detoxification may serve as one of the resistance mechanisms in bed bugs.

Metabolic Resistance in Bed Bugs

Directory of Open Access Journals (Sweden)

Omprakash Mittapalli

2011-03-01

Full Text Available Blood-feeding insects have evolved resistance to various insecticides (organochlorines, pyrethroids, carbamates, etc. through gene mutations and increased metabolism. Bed bugs (Cimex lectularius are hematophagous ectoparasites that are poised to become one of the major pests in households throughout the United States. Currently, C. lectularius has attained a high global impact status due to its sudden and rampant resurgence. Resistance to pesticides is one factor implicated in this phenomenon. Although much emphasis has been placed on target sensitivity, little to no knowledge is available on the role of key metabolic players (e.g., cytochrome P450s and glutathione S-transferases towards pesticide resistance in C. lectularius. In this review, we discuss different modes of resistance (target sensitivity, penetration resistance, behavioral resistance, and metabolic resistance with more emphasis on metabolic resistance.

Egg Hatch Rate and Nymphal Survival of the Bed Bug (Hemiptera: Cimicidae) After Exposure to Insecticide Sprays.

Science.gov (United States)

Hinson, K R; Benson, E P; Zungoli, P A; Bridges, W C; Ellis, B R

2016-12-01

Few studies have addressed the efficacy of insecticides used against eggs and first-instar nymphs of the bed bug, Cimex lectularius L. (Hemiptera: Cimicidae). Insect eggs are often resistant to insecticides; therefore, information on which products are effective is important. We evaluated the efficacy of four commonly used insecticide sprays applied directly to bed bug eggs. We also evaluated the efficacy of these insecticides to first-instar nymphs exposed to residuals resulting from directly spraying eggs. Temprid SC (beta-cyfluthrin, imidacloprid) was the most effective insecticide at preventing egg hatch (13% hatch rate) for pyrethroid-resistant, field-strain (Jersey City) bed bugs compared with a control (water [99% hatch rate]), Bedlam (MGK-264, sumithrin [84% hatch rate]), Demand CS (lambda-cyhalothrin [91% hatch rate]), and Phantom SC (chlorfenapyr [95% hatch rate]). Demand CS and Temprid SC were most effective at preventing egg hatch (0%) for an insecticide-susceptible (Harold Harlan) strain, followed by Bedlam (28%). Phantom SC produced a hatch rate similar to the control (97% and 96%, respectively). Harold Harlan-strain nymphs showed 100% survival for the control but 0% survival for Bedlam and Phantom SC. Jersey City-strain nymphs showed 100% survival for the control, 99% survival for Bedlam, 0% survival for Demand CS, 4% survival for Phantom SC, and 38% survival for Temprid SC. Demand CS was less effective at preventing hatch (91% hatch rate) of Jersey City-strain nymphs but was the only product to kill all nymphs (0% survival). One of the least effective products for preventing Jersey City-strain egg hatch (Phantom SC, 95% hatch rate) was the second most effective at killing nymphs, leaving only six of 141 alive. These findings indicate that survival of directly sprayed eggs and residually exposed, first-instar nymphs varies by strain, life stage, and product used. © The Authors 2016. Published by Oxford University Press on behalf of Entomological

Molecular markers reveal infestation dynamics of the bed bug (Hemiptera: Cimicidae) within apartment buildings.

Science.gov (United States)

Booth, Warren; Saenz, Virna L; Santangelo, Richard G; Wang, Changlu; Schal, Coby; Vargo, Edward L

2012-05-01

The bed bug, Cimex lectularius L. (Hemiptera: Cimicidae), has experienced an extraordinary global resurgence in recent years, the reasons for which remain poorly understood. Once considered a pest of lower socioeconomic classes, bed bugs are now found extensively across all residential settings, with widespread infestations established in multiapartment buildings. Within such buildings, understanding the population genetic structure and patterns of dispersal may prove critical to the development of effective control strategies. Here, we describe the development of 24 high-resolution microsatellite markers through next generation 454 pyrosequencing and their application to elucidate infestation dynamics within three multistory apartment buildings in the United States. Results reveal contrasting characteristics potentially representative of geographic or locale differences. In Raleigh, NC, an infestation within an apartment building seemed to have started from a single introduction followed by extensive spread. In Jersey City, NJ, two or more introductions followed by spread are evident in two buildings. Populations within single apartments in all buildings were characterized by high levels of relatedness and low levels of diversity, indicative of foundation from small, genetically depauperate propagules. Regardless of the number of unique introductions, genetic data indicate that spread within buildings is extensive, supporting both active and human-mediated dispersal within and between adjacent rooms or apartments spanning multiple floors.

Laboratory efficacy of mycoparasitic fungi (Aspergillus tubingensis and Trichoderma harzianum against tropical bed bugs (Cimex hemipterus (Hemiptera: Cimicidae

Directory of Open Access Journals (Sweden)

Zulaikha Zahran

2017-04-01

Conclusions: Approaches to the bed bugs treatment should be explored in-depth using a natural biological agent like fungus especially A. tubingensis to reduce this pest population, in order to replace chemical methods.

New Introductions, Spread of Existing Matrilines, and High Rates of Pyrethroid Resistance Result in Chronic Infestations of Bed Bugs (Cimex lectularius L. in Lower-Income Housing.

Directory of Open Access Journals (Sweden)

Ronald W Raab

Full Text Available Infestations of the common bed bug (Cimex lectularius L. have increased substantially in the United States in the past 10-15 years. The housing authority in Harrisonburg, Virginia, conducts heat-treatments after bed bugs are detected in a lower-income housing complex, by treating each infested unit at 60°C for 4-6 hours. However, a high frequency of recurrent infestations called into question the efficacy of this strategy. Genetic analysis using Bayesian clustering of polymorphic microsatellite loci from 123 bed bugs collected from 23 units from May 2012 to April 2013 in one building indicated that (a 16/21 (73% infestations were genetically similar, suggesting ineffective heat-treatments or reintroductions from within the building or from a common external source, followed by local spread of existing populations; and (b up to 5 of the infestations represented new genotypes, indicating that 5 new populations were introduced into this building in one year, assuming they were not missed in earlier screens. There was little to no gene flow among the 8 genetic clusters identified in the building. Bed bugs in the U.S. often possess one or both point mutations in the voltage-gated sodium channel, termed knockdown resistance (kdr, from valine to leucine (V419L and leucine to isoleucine (L925I that confer target-site resistance against pyrethroid insecticides. We found that 48/121 (40% bed bugs were homozygous for both kdr mutations (L419/I925, and a further 59% possessed at least one of the kdr mutations. We conclude that ineffective heat treatments, new introductions, reintroductions and local spread, and an exceptionally high frequency of pyrethroid resistance are responsible for chronic infestations in lower-income housing. Because heat treatments fail to protect from reintroductions, and pesticide use has not decreased the frequency of infestations, preventing new introductions and early detection are the most effective strategies to avoid bed bug

Exposure of bed bugs to metarhizium anisopliae, and the effect of defensive secretions on fungal growth in vitro

Science.gov (United States)

Bed bugs Cimex lectularius were treated with conidia of the entomopathogenic fungus Metarhizium anisopliae by topical, spray, and contact exposure. One week post-exposure, inconsistent mortalities were observed, averaging 30% across all treatment groups and replicates. Microscopic examination of top...

Molecular characterization of Wolbachia infection in bed bugs (Cimex lectularius collected from several localities in France

Directory of Open Access Journals (Sweden)

Akhoundi Mohammad

2016-01-01

Full Text Available Wolbachia symbionts are maternally inherited intracellular bacteria that have been detected in numerous insects including bed bugs. The objective of this study, the first epidemiological study in Europe, was to screen Wolbachia infection among Cimex lectularius collected in the field, using PCR targeting the surface protein gene (wsp, and to compare obtained Wolbachia strains with those reported from laboratory colonies of C. lectularius as well as other Wolbachia groups. For this purpose, 284 bed bug specimens were caught and studied from eight different regions of France including the suburbs of Paris, Bouches-du-Rhône, Lot-et-Garonne, and five localities in Alpes-Maritimes. Among the samples, 166 were adults and the remaining 118 were considered nymphs. In all, 47 out of 118 nymphs (40% and 61 out of 166 adults (37% were found positive on wsp screening. Among the positive cases, 10 samples were selected randomly for sequencing. The sequences had 100% homology with wsp sequences belonging to the F-supergroup strains of Wolbachia. Therefore, we confirm the similarity of Wolbachia strains detected in this epidemiological study to Wolbachia spp. reported from laboratory colonies of C. lectularius.

Insecticide Resistance in Eggs and First Instars of the Bed Bug, Cimex lectularius (Hemiptera: Cimicidae

Directory of Open Access Journals (Sweden)

Brittany E. Campbell

2015-01-01

Full Text Available Two strains of the common bed bug, Cimex lectularius L., eggs and first instars collected from pyrethroid-resistant adults were evaluated for insecticide resistance and compared to a susceptible strain. Dose-response bioassays were conducted using two insecticide formulations (Temprid: imidacloprid/β-cyfluthrin, and Transport: acetamiprid/ bifenthrin. The lethal concentration (LC50 for the two resistant egg strains exposed to imidacloprid/β-cyfluthrin ranged from 3 to 5-fold higher than susceptible strain eggs. Resistant strain eggs dipped into formulations of acetamiprid/bifenthrin had LC50 values which were significantly greater (39 to 1,080-fold than susceptible strain eggs. Similar to eggs, resistant strain first instars exposed to residual applications of imidacloprid/β-cyfluthrin had LC50 values ranging from 121 to 493-fold greater than susceptible strain first instars. When resistant strain first instars were treated with acetamiprid/bifenthrin, they had LC50 values that were 99 to >1,900-fold greater than susceptible strain first instars. To determine differences between egg and first instar resistance, stage resistance ratios (SRR were compared between the two stages. There was little difference between the egg and first instar stages, indicated by small SRR values ranging from 1.1 to 10.0. This study suggests that insecticide resistance is expressed early during bed bug development.

Bed Bugs Appearance and Life Cycle

Science.gov (United States)

Identify these bugs accurately, from egg to nymph to adult. Adults are about the size of an apple seed, brown and oval-shaped, and either flat or balloon-like depending on how recently fed. Nymphs are a bit smaller and translucent or whitish yellow.

Efficacy of Selected Insecticide Sprays and Aerosols against the Common Bed Bug, Cimex lectularius (Hemiptera: Cimicidae

Directory of Open Access Journals (Sweden)

Changlu Wang

2016-01-01

Full Text Available We evaluated the residual efficacy of four liquid sprays and four ready-to-use aerosols that are commonly used in the U.S. against a field-collected bed bug, Cimex lectularius L., strain with moderate resistance level to pyrethroids. The four liquid sprays were: Tandem (0.1% thiamethoxam, 0.03% lambda-cyhalothrin, Temprid SC (0.05% imidacloprid, 0.025% cyfluthrin, Transport GHP (0.05% acetamiprid, 0.06% bifenthrin, and Demand CS (0.03% lambda-cyhalothrin. The four aerosols were: Alpine (0.5% dinotefuran, Bedlam (0.4% sumithrin, 1.6% MGK 264, Bedlam Plus (0.4% sumithrin, 1% MGK 264, 0.05% imidacloprid, and Phantom (0.5% chlorfenapyr. Bed bugs were confined for 4 h to treated substrates (aged 24 h. Four substrates were tested: fabric, unpainted wood, painted wood, and vinyl. Bedlam, Demand CS, and Temprid SC resulted in ≤70% mortality on all tested substrates. Among the other five products, substrate type significantly affected their residual efficacy, except for Transport GHP, which caused ≥89.7% mortality regardless of the substrate. The effect of exposure time (5 min, 4 h, and 24 h on the efficacy of Transport GHP and Phantom aerosol also was evaluated. A 4 h continuous exposure to Phantom aerosol or Transport GHP residue caused similar mortality to 24 h exposure and higher mortality than 5 min exposure.

Inhibition of the entomopathogenic fungus Metarhizium anisopliae in vitro by the bed bug defensive secretions (E)-2-hexenal and (E)-2-octenal

Science.gov (United States)

The two major aldehydes (E)-2-hexenal and (E)-2-octenal emitted as defensive secretions by bed bugs Cimex lectularius L. (Hemiptera: Cimicidae), inhibit the in vitro growth of Metarhizium anisopliae (Metsch.) Sokorin (Hypocreales: Clavicipitaceae). These chemicals inhibit fungal growth by direct con...

A review of data on laboratory colonies of bed bugs (Cimicidae, an insect of emerging medical relevance

Directory of Open Access Journals (Sweden)

Cannet Arnaud

2015-01-01

Full Text Available Cimicidae are hematophagous Heteroptera, feeding on human blood, that have been the subject of significant medical investigation. In particular, they have been colonized under laboratory conditions to study their medical relevance. Laboratory colonization of these bugs is a multifactorial phenomenon. Our goal was to conduct a comparative literature review to classify the published data, demonstrating preferred bed bug colony conditions. We show that physical factors including temperature, relative humidity and photoperiod, and physiological factors such as type and frequency of blood meals play important roles in laboratory colonies. Any change in these factors produces changes in life-cycle duration. Temperature and blood meal are the most important factors, with a marked impact on the life-cycle of laboratory populations, depending on the species. A wide range of temperatures (15–34 °C and relative humidity (46–75% with an average of 25 °C and 59% were found for these colonies. Two widely used blood sources for the colonies were rabbits and humans.

Variability Bugs:

DEFF Research Database (Denmark)

Melo, Jean

. Although many researchers suggest that preprocessor-based variability amplifies maintenance problems, there is little to no hard evidence on how actually variability affects programs and programmers. Specifically, how does variability affect programmers during maintenance tasks (bug finding in particular......)? How much harder is it to debug a program as variability increases? How do developers debug programs with variability? In what ways does variability affect bugs? In this Ph.D. thesis, I set off to address such issues through different perspectives using empirical research (based on controlled...... experiments) in order to understand quantitatively and qualitatively the impact of variability on programmers at bug finding and on buggy programs. From the program (and bug) perspective, the results show that variability is ubiquitous. There appears to be no specific nature of variability bugs that could...

Effective Bug Finding

DEFF Research Database (Denmark)

Rivas, Iago Abal

Lightweight bug finders (also known as code scanners) are becoming popular, they scale well and can find simple yet common programming errors. It is now considered a good practice to integrate these tools as part of your development process. The Linux project, for instance, has an automated testing...... service, known as the Kbuild robot, that runs a few of these code scanners. In this project, I have carefully studied tens of historical Linux bugs, and I have found that many of these bugs, despite being conceptually simple, were not caught by any code scanning tool. The reason is that, by design, code...... by matching temporal bug-patterns against the control-flow graph of this program abstraction. I have implemented a proof-of-concept bug finder based on this technique, EBA, and confirmed that it is both scalable and effective at finding bugs. On a benchmark of historical Linux double-lock bugs, EBA was able...

Nymphs of the common bed bug (Cimex lectularius produce anti-aphrodisiac defence against conspecific males

Directory of Open Access Journals (Sweden)

Harraca Vincent

2010-09-01

Full Text Available Abstract Background Abdominal wounding by traumatic insemination and the lack of a long distance attraction pheromone set the scene for unusual sexual signalling systems. Male bed bugs (Cimex lectularius mount any large, newly fed individual in an attempt to mate. Last instar nymphs overlap in size with mature females, which make them a potential target for interested males. However, nymphs lack the female's specific mating adaptations and may be severely injured by the abdominal wounding. We, therefore, hypothesized that nymphs emit chemical deterrents that act as an honest status signal, which prevents nymph sexual harassment and indirectly reduces energy costs for males. Results Behavioural mating assays showed that males mount nymphs significantly shorter time compared to females, although initial mounting preference was the same. In support of our hypothesis, nymphs experienced the same percentage of mating with sperm transfer as females if they were unable to emit (E-2-hexenal, (E-2-octenal 4-oxo-(E-2-hexenal and 4-oxo-(E-2-octenal, from their dorsal abdominal glands. We report that the aldehydes and 4-oxo-(E-2-hexenal are detected by olfactory receptor neurons housed in smooth and grooved peg sensilla, respectively, on the adult antennae, at biologically relevant concentrations. Behavioural experiments showed that application of 4-oxo-(E-2-hexenal or the two aldehydes at a nymph-emitted ratio, to a male/female pair during mounting initiation, decreased mating frequency to a rate comparable to that of a male/nymph pair. Conclusions By combining behavioural and sensory studies, we show that the nymph-specific alarm pheromone plays an important role in intra-specific communication in the common bed bug. Alarm pheromones are commonly looked upon as a system in predator/prey communication, but here we show that alarm pheromones may be used as multipurpose signals such as decreasing the risk of nymphal mating by males. See commentary: http

IDENTIFIKASI DUPLIKASI LAPORAN BUG PADA REPOSITORI LAPORAN BUG UNTUK MENGHASILKAN SARAN RESOLUSI BUG PERANGKAT LUNAK

Directory of Open Access Journals (Sweden)

Sugiyanto Sugiyanto

2013-07-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Repositori laporan bug perangkat lunak sebenarnya menyediakan informasi dan saran resolusi bug tertentu yang dapat digunakan untuk memperbaiki bug yang terjadi pada tahap perbaikan perangkat lunak. Pengembang dapat mencari saran resolusi bug perangkat lunak tertentu dengan mengidentifikasi duplikasi bug pada repositori laporan bug perangkat lunak. Penelitian ini mengusulkan sistem identifikasi duplikasi laporan bug pada repositori laporan bug untuk menghasilkan saran resolusi bug perangkat lunak menggunakan teknik pendekatan temu kembali informasi. Pengembang dapat menemukan informasi alasan kegagalan perangkat lunak dan memperoleh saran resolusi untuk memperbaiki bug tersebut. Hasil penelitian ini menunjukkan bahwa teknik pendekatan temu kembali informasi dapat digunakan untuk mengidentifikasi duplikasi laporan bug pada repositori laporan bug untuk menghasilkan saran resolusi bug perangkat lunak.

Top Ten Bed Bug Tips

Science.gov (United States)

... Directory Planning, Budget and Results Jobs and Internships Headquarters Offices Regional Offices Labs and Research Centers Bed ... you hire an expert, be sure it’s a company with a good reputation and request that it ...

Analysis of 44 Cases before the Landlord and Tenant Board Involving Bed Bug Infestations in Ontario, Canada: Focus on Adjudicator Decisions Based on Entomological/Pest Management Evidence and Accountability under the Residential Tenancy Act and Other Applicable Legislation.

Science.gov (United States)

Bryks, Sam

2011-07-19

The resurgence of bed bugs in major urban centres in North America has resulted in conflict between landlords and tenants. This is commonly focused on attribution of blame for source of infestation, on responsibility, on costs for preparation, treatment and losses, and for compensation as rent abatement and/or alternative temporary housing. In Ontario, Canada, these issues are often decided by adjudicators at the Landlord and Tenant Board hearing claims, counter-claims and defense by legal representation (lawyers and paralegals) as well as through mediation. Evidence in these hearings may include photographs, invoices for costs as well as testimony by tenants, landlords and "expert witnesses" who are most often pest control firms representing their landlord clients. A total of 44 Landlord and Tenant Board adjudicated cases available online were analyzed. The analysis included elements of the decisions such as adjudicator, claimant (landlord or tenant), basis of claim, review of evidence, amount of claim, amount awarded, and evaluation of the quality of the evidence. The results of the analysis of these findings are discussed. Recommendations for improvement of adjudicator decisions on the basis of knowledge of bed bug biology and Integrated Pest Management best practices are presented as well as the importance of education of tenants and landlords to a process of mutual trust, support and accountability.

Analysis of 44 Cases before the Landlord and Tenant Board Involving Bed Bug Infestations in Ontario, Canada: Focus on Adjudicator Decisions Based on Entomological/Pest Management Evidence and Accountability under the Residential Tenancy Act and Other Applicable Legislation

Science.gov (United States)

Bryks, Sam

2011-01-01

The resurgence of bed bugs in major urban centres in North America has resulted in conflict between landlords and tenants. This is commonly focused on attribution of blame for source of infestation, on responsibility, on costs for preparation, treatment and losses, and for compensation as rent abatement and/or alternative temporary housing. In Ontario, Canada, these issues are often decided by adjudicators at the Landlord and Tenant Board hearing claims, counter-claims and defense by legal representation (lawyers and paralegals) as well as through mediation. Evidence in these hearings may include photographs, invoices for costs as well as testimony by tenants, landlords and “expert witnesses” who are most often pest control firms representing their landlord clients. A total of 44 Landlord and Tenant Board adjudicated cases available online were analyzed. The analysis included elements of the decisions such as adjudicator, claimant (landlord or tenant), basis of claim, review of evidence, amount of claim, amount awarded, and evaluation of the quality of the evidence. The results of the analysis of these findings are discussed. Recommendations for improvement of adjudicator decisions on the basis of knowledge of bed bug biology and Integrated Pest Management best practices are presented as well as the importance of education of tenants and landlords to a process of mutual trust, support and accountability. PMID:26467732

Apparatus for controlling fluidized beds

Science.gov (United States)

Rehmat, A.G.; Patel, J.G.

1987-05-12

An apparatus and process are disclosed for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance. 2 figs.

Effective Bug Finding

DEFF Research Database (Denmark)

Rivas, Iago Abal

Lightweight bug finders (also known as code scanners) are becoming popular, they scale well and can find simple yet common programming errors. It is now considered a good practice to integrate these tools as part of your development process. The Linux project, for instance, has an automated testing...... service, known as the Kbuild robot, that runs a few of these code scanners. In this project, I have carefully studied tens of historical Linux bugs, and I have found that many of these bugs, despite being conceptually simple, were not caught by any code scanning tool. The reason is that, by design, code...... scanners will find mostly superficial errors. Thus, when bugs span multiple functions, even if simple, they become undetectable by most code scanners. The studied set of historical bugs contained many of such cases. This PhD thesis proposes a bug-finding technique that is both lightweight and capable...

Harvesting Venom Toxins from Assassin Bugs and Other Heteropteran Insects.

Science.gov (United States)

Walker, Andrew Allan; Rosenthal, Max; Undheim, Eivind E A; King, Glenn F

2018-04-21

Heteropteran insects such as assassin bugs (Reduviidae) and giant water bugs (Belostomatidae) descended from a common predaceous and venomous ancestor, and the majority of extant heteropterans retain this trophic strategy. Some heteropterans have transitioned to feeding on vertebrate blood (such as the kissing bugs, Triatominae; and bed bugs, Cimicidae) while others have reverted to feeding on plants (most Pentatomomorpha). However, with the exception of saliva used by kissing bugs to facilitate blood-feeding, little is known about heteropteran venoms compared to the venoms of spiders, scorpions and snakes. One obstacle to the characterization of heteropteran venom toxins is the structure and function of the venom/labial glands, which are both morphologically complex and perform multiple biological roles (defense, prey capture, and extra-oral digestion). In this article, we describe three methods we have successfully used to collect heteropteran venoms. First, we present electrostimulation as a convenient way to collect venom that is often lethal when injected into prey animals, and which obviates contamination by glandular tissue. Second, we show that gentle harassment of animals is sufficient to produce venom extrusion from the proboscis and/or venom spitting in some groups of heteropterans. Third, we describe methods to harvest venom toxins by dissection of anaesthetized animals to obtain the venom glands. This method is complementary to other methods, as it may allow harvesting of toxins from taxa in which electrostimulation and harassment are ineffective. These protocols will enable researchers to harvest toxins from heteropteran insects for structure-function characterization and possible applications in medicine and agriculture.

Natural insecticide based-leaves extract of Piper aduncum (Piperaceae in the control of stink bug brown soybean

Directory of Open Access Journals (Sweden)

Ludmila Porto Piton

2014-11-01

Full Text Available This research aimed to evaluate the insecticide potential of the leaves extract of Piper aduncum (L. (Piperaceae on development of brown stink bug, Euschistus heros (F., major pest in soybean crop in Mato Grosso State. For this a bioassay was conducted with eggs, nymphs and adults of this stink bug, using the concentrations 0.5; 1.0; 2.0; 4.0 and 8.0%, of the extract acetonic of P. aduncum and acetone for control. It was evaluated the numbers of unviable eggs, nymphs death and longevity, fecundity and fertility of the adults. In the immersing eggs bioassay, all concentrations greater than 1% unviable more than 70% of the eggs, while in the contact bioassay only 19% of the eggs were unviable in 8% concentration, differing of control. In nymphs bioassay the concentrations of 8% and 4% caused death of 72% and 52%, respectively. In adults bioassay all concentrations tested reduced significantly the survival and reproduction of the insects. Thus is evidence that P. aduncum is a potential plant for stink bug control, because it had deleterious action in all development phases on E. heros.

A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system

Directory of Open Access Journals (Sweden)

Boby John

2015-12-01

Full Text Available The controlling of bug fixing process during the system testing phase of software development life cycle is very important for fixing all the detected bugs within the scheduled time. The presence of open bugs often delays the release of the software or result in releasing the software with compromised functionalities. These can lead to customer dissatisfaction, cost overrun and eventually the loss of market share. In this paper, the authors propose a methodology to quantitatively manage the bug fixing process during system testing. The proposed methodology identifies the critical milestones in the system testing phase which differentiates the successful projects from the unsuccessful ones using Mahalanobis Taguchi system. Then a model is developed to predict whether a project is successful or not with the bug fix progress at critical milestones as control factors. Finally the model is used to control the bug fixing process. It is found that the performance of the proposed methodology using Mahalanobis Taguchi system is superior to the models developed using other multi-dimensional pattern recognition techniques. The proposed methodology also reduces the number of control points providing the managers with more options and flexibility to utilize the bug fixing resources across system testing phase. Moreover the methodology allows the mangers to carry out mid- course corrections to bring the bug fixing process back on track so that all the detected bugs can be fixed on time. The methodology is validated with eight new projects and the results are very encouraging.

Biochemical characterization of digestive amylase of wheat bug ...

African Journals Online (AJOL)

STORAGESEVER

2009-08-04

Aug 4, 2009 ... ... Boyd et al., 2002). Wheat bug also feeds on different stage of developing grains. ... the grain during feeding, Wheat bug enzymes degrade gluten proteins and cause rapid relaxation of dough resulting in the production of .... A blank without substrate but with α-amylase extract and a control containing no ...

R2WinBUGS: A Package for Running WinBUGS from R

Directory of Open Access Journals (Sweden)

Sibylle Sturtz

2005-01-01

Full Text Available The R2WinBUGS package provides convenient functions to call WinBUGS from R. It automatically writes the data and scripts in a format readable by WinBUGS for processing in batch mode, which is possible since version 1.4. After the WinBUGS process has finished, it is possible either to read the resulting data into R by the package itself--which gives a compact graphical summary of inference and convergence diagnostics--or to use the facilities of the coda package for further analyses of the output. Examples are given to demonstrate the usage of this package.

WYSIWIB: A Declarative Approach to Finding Protocols and Bugs in Linux Code

DEFF Research Database (Denmark)

Lawall, Julia Laetitia; Brunel, Julien Pierre Manuel; Hansen, Rene Rydhof

2008-01-01

the tools to be able to find specific kinds of bugs. In this paper, we propose a declarative approach based on a control-flow based program search engine. Our approach is WYSIWIB (What You See Is Where It Bugs), since the programmer is able to express specifications for protocol and bug finding using...

Apparatus and process for controlling fluidized beds

Science.gov (United States)

Rehmat, Amirali G.; Patel, Jitendra G.

1985-10-01

An apparatus and process for control and maintenance of fluidized beds under non-steady state conditions. An ash removal conduit is provided for removing solid particulates from a fluidized bed separate from an ash discharge conduit in the lower portion of the grate supporting such a bed. The apparatus and process of this invention is particularly suitable for use in ash agglomerating fluidized beds and provides control of the fluidized bed before ash agglomeration is initiated and during upset conditions resulting in stable, sinter-free fluidized bed maintenance.

VA National Bed Control System

Data.gov (United States)

Department of Veterans Affairs — The VA National Bed Control System records the levels of operating, unavailable and authorized beds at each VAMC, and it tracks requests for changes in these levels....

Studies towards the sex pheromone of the green capsid bug

NARCIS (Netherlands)

Drijfhout, F.P.

2001-01-01

The green capsid bug, Lygocoris pabulinus (L.) (Heteroptera: Miridae) is a serious pest in fruit orchards, which is difficult to control. Because it is difficult to determine the actual population density, fruit growers apply insecticides against the green capsid bug on

Controlling Bed Bugs Using Integrated Pest Management (IPM)

Science.gov (United States)

Several non-chemical methods can help control an infestation, such as heat treatment or freezing, or mattress and box spring encasements. When using a pesticide, follow label directions carefully and check for EPA registration.

WYSIWYB: A Declarative Approach to Finding API Protocols and Bugs in Linux Code

DEFF Research Database (Denmark)

Lawall, Julia; Lawall, Julia; Palix, Nicolas

2009-01-01

the tools to be able to find specific kinds of bugs. In this paper, we propose a declarative approach based on a control-flow based program search engine. Our approach is WYSIWIB (What You See Is Where It Bugs), since the programmer is able to express specifications for protocol and bug finding using...

WYSIWIB: A Declarative Approach to Finding API Protocols and Bugs in Linux Code

DEFF Research Database (Denmark)

Lawall, Julia; Brunel, Julien Pierre Manuel; Palix, Nicolas Jean-Michel

2009-01-01

the tools on specific kinds of bugs and to relate the results to patterns in the source code. We propose a declarative approach to bug finding in Linux OS code using a control-flow based program search engine. Our approach is WYSIWIB (What You See Is Where It Bugs), since the programmer expresses...

Comparison of management strategies for squash bugs (Hemiptera: Coreidae) in watermelon.

Science.gov (United States)

Dogramaci, Mahmut; Shrefler, James W; Roberts, B Warren; Pair, Sam; Edelson, J V

2004-12-01

Two watermelon pest management practices, a squash trap crop and a standard recommendation using soil-applied carbofuran, were compared using large-scale field plots to assess trap crop suitability as a replacement for the standard in 2000, 2001, and 2002. In both systems, foliar insecticide applications were used to control squash bugs when populations exceeded threshold levels. During 2001 and 2002, a treatment of untreated watermelon was used. Early season adult insects, from seedling to fruit set, are most critical for watermelon. Significantly fewer early adult bugs were found on watermelon in the trap crop than in the standard recommended practice in 1 of 3 yr. In both years, significantly fewer adult squash bugs were found in watermelon in the trap crop than in untreated fields. The standard recommended practice significantly reduced adult squash bugs in watermelon compared with the untreated in 1 of 2 yr. There was no significant correlation of watermelon yield and squash bug density, indicating that squash bug densities were too low to impact yield. Although squash bugs were reduced significantly by the trap crop, marketable watermelon yields were lower in the squash trap crop than in untreated watermelon, suggesting that pest management treatments may interfere with crop productivity factors other than squash bug colonization. Results suggest that mid-season production squash bug should be managed by monitoring populations and using insecticides as needed rather than using at-plant treatment. Further research is needed to compare treatments during early-season production.

Using Software Dependency to Bug Prediction

Directory of Open Access Journals (Sweden)

Peng He

2013-01-01

Full Text Available Software maintenance, especially bug prediction, plays an important role in evaluating software quality and balancing development costs. This study attempts to use several quantitative network metrics to explore their relationships with bug prediction in terms of software dependency. Our work consists of four main steps. First, we constructed software dependency networks regarding five dependency scenes at the class-level granularity. Second, we used a set of nine representative and commonly used metrics—namely, centrality, degree, PageRank, and HITS, as well as modularity—to quantify the importance of each class. Third, we identified how these metrics were related to the proneness and severity of fixed bugs in Tomcat and Ant and determined the extent to which they were related. Finally, the significant metrics were considered as predictors for bug proneness and severity. The result suggests that there is a statistically significant relationship between class’s importance and bug prediction. Furthermore, betweenness centrality and out-degree metric yield an impressive accuracy for bug prediction and test prioritization. The best accuracy of our prediction for bug proneness and bug severity is up to 54.7% and 66.7% (top 50, Tomcat and 63.8% and 48.7% (top 100, Ant, respectively, within these two cases.

Bayesian modeling using WinBUGS

CERN Document Server

Ntzoufras, Ioannis

2009-01-01

A hands-on introduction to the principles of Bayesian modeling using WinBUGS Bayesian Modeling Using WinBUGS provides an easily accessible introduction to the use of WinBUGS programming techniques in a variety of Bayesian modeling settings. The author provides an accessible treatment of the topic, offering readers a smooth introduction to the principles of Bayesian modeling with detailed guidance on the practical implementation of key principles. The book begins with a basic introduction to Bayesian inference and the WinBUGS software and goes on to cover key topics, including: Markov Chain Monte Carlo algorithms in Bayesian inference Generalized linear models Bayesian hierarchical models Predictive distribution and model checking Bayesian model and variable evaluation Computational notes and screen captures illustrate the use of both WinBUGS as well as R software to apply the discussed techniques. Exercises at the end of each chapter allow readers to test their understanding of the presented concepts and all ...

42 Variability Bugs in the Linux Kernel

DEFF Research Database (Denmark)

Abal, Iago; Brabrand, Claus; Wasowski, Andrzej

2014-01-01

Feature-sensitive verification pursues effective analysis of the exponentially many variants of a program family. However, researchers lack examples of concrete bugs induced by variability, occurring in real large-scale systems. Such a collection of bugs is a requirement for goal-oriented research...... provide self-contained simplified C99 versions of the bugs, facilitating understanding and tool evaluation. Our study provides insights into the nature and occurrence of variability bugs in a large C software system, and shows in what ways variability affects and increases the complexity of software bugs....

Health Information in Amharic (Amarɨñña / አማርኛ )

Science.gov (United States)

... Bed Bug Control in Residences - Amarɨñña / አማርኛ (Amharic) MP3 Minnesota Department of Agriculture Vacuuming to Capture Bed ... Vacuuming to Capture Bed Bugs - Amarɨñña / አማርኛ (Amharic) MP3 Minnesota Department of Agriculture Benefits of Exercise Health ...

Bug City: Beetles [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Bug City: Bees [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Control of the Bed Temperature of a Circulating Fluidized Bed Boiler by using Particle Swarm Optimization

Directory of Open Access Journals (Sweden)

AYGUN, H.

2012-05-01

Full Text Available Circulating fluidized bed boilers are increasingly used in the power generation due to their higher combustion efficiency and lower pollutant emissions. Such boilers require an effective control of the bed temperature, because it influences the boiler combustion efficiency and the rate of harmful emissions. A Particle-Swarm-Optimization-Proportional-Integrative-Derivative (PSO-PID controller for the bed temperature of a circulating fluidized bed boiler is presented. In order to prove the capability of the proposed controller, its performances are compared at different boiler loads with those of a Fuzzy Logic (FL controller. The simulation results demonstrate some advantages of the proposed controller.

Bug City: Ants [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children (grades 1-6) learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic…

40 Variability Bugs in the Linux Kernel

DEFF Research Database (Denmark)

Abal Rivas, Iago; Brabrand, Claus; Wasowski, Andrzej

2014-01-01

Feature-sensitive verification is a recent field that pursues the effective analysis of the exponential number of variants of a program family. Today researchers lack examples of concrete bugs induced by variability, and occurring in real large-scale software. Such a collection of bugs is a requi......Feature-sensitive verification is a recent field that pursues the effective analysis of the exponential number of variants of a program family. Today researchers lack examples of concrete bugs induced by variability, and occurring in real large-scale software. Such a collection of bugs...... the outcome of our analysis into a database. In addition, we provide self-contained simplified C99 versions of the bugs, facilitating understanding and tool evaluation. Our study provides insights about the nature and occurrence of variability bugs in a large C software system, and shows in what ways...

Fixed-bed Reactor Dynamics and Control - A Review

DEFF Research Database (Denmark)

Jørgensen, S. B.

1986-01-01

The industrial diversity of fixed bed reactors offers a challenging and relevant set of control problems. These intricate problems arise due to the rather complex dynamics of fixed bed reactors and to the complexity of actual reactor configurations. Many of these control problems are nonlinear...... and multi-variable. During the last decade fixed bed reactor control strategies have been proposed and investigated experimentally. This paper reviews research on these complex control problems with an emphasis upon solutions which have been demon-strated to work in the laboratory and hold promise...

Ecosystem-Based Incorporation of Nectar-Producing Plants for Stink Bug Parasitoids

Directory of Open Access Journals (Sweden)

Glynn Tillman

2017-06-01

Full Text Available Adult parasitoids of pest insects rely on floral resources for survival and reproduction, but can be food-deprived in intensively managed agricultural systems lacking these resources. Stink bugs are serious pests for crops in southwest Georgia. Provisioning nectar-producing plants for parasitoids of stink bugs potentially can enhance biocontrol of these pests. Knowledge of spatial and temporal availability and distribution of stink bugs in host plants is necessary for appropriate timing and placement of flowering plants in agroecosystems. Stink bugs move between closely associated host plants throughout the growing season in response to deteriorating suitability of their host plants. In peanut-cotton farmscapes, stink bugs develop in peanut, and subsequently the adults disperse into adjacent cotton. Parasitism of Nezara viridula (L. adults by Trichopoda pennipes (F. at the peanut-cotton interface was significantly higher in cotton with a strip of milkweed or buckwheat between the two crops than in cotton alone. Milkweed and buckwheat also provided nectar to a wide range of insect pollinators. Monarch butterflies fed on milkweed. When placed between peanut and cotton, a strip of soybean was an effective trap crop for cotton, reducing economic damage. Incorporation of buckwheat near soybean enhanced parasitism of Euschistus servus (Say eggs by Telenomus podisi Ashmead in cotton. In conclusion, nectar provision enhances biocontrol of stink bugs, acts together with other management tactics for stink bug control, and aids in conservation of natural enemies, insect pollinators, and the monarch butterfly.

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Tips to prevent and treat bug bites Although most bug bites are harmless, some can spread dangerous ... one’s greatest efforts, bug bites still happen. Fortunately, most bug bites and stings can be safely treated ...

RNA-Seq and molecular docking reveal multi-level pesticide resistance in the bed bug

Directory of Open Access Journals (Sweden)

Mamidala Praveen

2012-01-01

Full Text Available Abstract Background Bed bugs (Cimex lectularius are hematophagous nocturnal parasites of humans that have attained high impact status due to their worldwide resurgence. The sudden and rampant resurgence of C. lectularius has been attributed to numerous factors including frequent international travel, narrower pest management practices, and insecticide resistance. Results We performed a next-generation RNA sequencing (RNA-Seq experiment to find differentially expressed genes between pesticide-resistant (PR and pesticide-susceptible (PS strains of C. lectularius. A reference transcriptome database of 51,492 expressed sequence tags (ESTs was created by combining the databases derived from de novo assembled mRNA-Seq tags (30,404 ESTs and our previous 454 pyrosequenced database (21,088 ESTs. The two-way GLMseq analysis revealed ~15,000 highly significant differentially expressed ESTs between the PR and PS strains. Among the top 5,000 differentially expressed ESTs, 109 putative defense genes (cuticular proteins, cytochrome P450s, antioxidant genes, ABC transporters, glutathione S-transferases, carboxylesterases and acetyl cholinesterase involved in penetration resistance and metabolic resistance were identified. Tissue and development-specific expression of P450 CYP3 clan members showed high mRNA levels in the cuticle, Malpighian tubules, and midgut; and in early instar nymphs, respectively. Lastly, molecular modeling and docking of a candidate cytochrome P450 (CYP397A1V2 revealed the flexibility of the deduced protein to metabolize a broad range of insecticide substrates including DDT, deltamethrin, permethrin, and imidacloprid. Conclusions We developed significant molecular resources for C. lectularius putatively involved in metabolic resistance as well as those participating in other modes of insecticide resistance. RNA-Seq profiles of PR strains combined with tissue-specific profiles and molecular docking revealed multi-level insecticide

Synthèse bibliographique sur le comportement de recherche de l'hôte chez la punaise de lit (Cimex lectularius et applications dans le cadre de la lutte intégrée

Directory of Open Access Journals (Sweden)

Legrand, P.

2016-01-01

Full Text Available Host-seeking behavior in the bed bug (Cimex lectularius and applications in integrated pest management. A review. Description of the subject. This study analyzes host-seeking behavior in the common bed bug, Cimex lectularius, paying particular attention to human stimuli involved in this orientation process. The potential applications in integrated pest management are discussed. Literature. The common bed bug is an obligate hematophagous that has been associated with humans for millennia. When searching for food, this insect relies for orientation on signals produced by its hosts. Carbon dioxide emitted by human respiration is more attractive to bugs than body heat. The response of bed bugs to other volatile organic compounds released by the human body has been tested, but their perception and behavioral impact are not always studied together, and some discrepancies occasionally appear. Conclusions. Currently, carbon dioxide is the most efficient lure for bed bugs, although real human bait is more attractive. Some home-made traps baited with dry ice are more efficient than other traps using complicated chemical blends. Dry ice seems to be more efficient as a lure than complex chemical blends, and it can be used in simple traps. Our knowledge of host-seeking behavior in bed bugs is still partial and new questions are constantly arising. Further efforts in the study of the chemical ecology of this process are needed in order to improve the management of this pest. The control of bed bugs in European countries appears to be a major challenge for the years to come.

The BUG BITBUS Universal Gateway

International Nuclear Information System (INIS)

Nawrocki, G.

1996-01-01

The BITBUS Universal Gateway (BUG) provides a unique, cost effective solution to many different computer interface problems. Each BUG node, utilizing ''on board'' intelligence, has the ability to provide a communication link between BITBUS protocol and other computer-signal interfaces. Among them, IEEE-488, RS232, and raw analog and binary signal 1/0. BITBUS is a multidrop, multinode link with the ability to communicate over great distances. By using this method of signal transfer, along with the communication conversion ability of the BUG, one could accomplish such things as the ability to run IEEE-488 instruments over great distances, extend a multidrop links to RS232 instruments, and provide a convenient interface point for remote analog and binary 1/0 signals, all on one homogeneous network. The BUG not only provides this through the wired ''twisted pair'' standard of BITBUS, but extends the ability to fiber optic communications for signal transfer over extreme distances and through electrically ''noisy'' environments

Carbon Bed Mercury Emissions Control For Mixed Waste Treatment

International Nuclear Information System (INIS)

Soelberg, Nick; Enneking, Joe

2010-01-01

Mercury has had various uses in nuclear fuel reprocessing and other nuclear processes, and so is often present in radioactive and mixed (both radioactive and hazardous according to the Resource Conservation and Recovery Act) wastes. Depending on regulatory requirements, the mercury in the off-gas must be controlled with sometimes very high efficiencies. Compliance to the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards can require off-gas mercury removal efficiencies up to 99.999% for thermally treating some mixed waste streams. Several test programs have demonstrated this level of off-gas mercury control using fixed beds of granular sulfur-impregnated activated carbon. Other results of these tests include: (a) The depth of the mercury control mass transfer zone was less than 15-30 cm for the operating conditions of these tests, (b) MERSORB(reg s ign) carbon can sorb Hg up to 19 wt% of the carbon mass, and (c) the spent carbon retained almost all (98-99.99%) of the Hg; but when even a small fraction of the total Hg dissolves, the spent carbon can fail the TCLP test when the spent carbon contains high Hg concentrations. Localized areas in a carbon bed that become heated through heat of adsorption, to temperatures where oxidation occurs, are referred to as 'bed hot spots.' Carbon bed hot spots must be avoided in processes that treat radioactive and mixed waste. Key to carbon bed hot spot mitigation are (a) designing for sufficient gas velocity, for avoiding gas flow maldistribution, and for sufficient but not excessive bed depth, (b) monitoring and control of inlet gas flowrate, temperature, and composition, (c) monitoring and control of in-bed and bed outlet gas temperatures, and (d) most important, monitoring of bed outlet CO concentrations. An increase of CO levels in the off-gas downstream of the carbon bed to levels about 50-100 ppm higher than the inlet CO concentration indicate CO formation in the bed, caused by carbon bed

Bug City: Aquatic Insects [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Bug City: Flies & Mosquitoes [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children (grades 1-6) learn about insects and other small critters. All aspects of bug life are touched upon, including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic…

Bug City: Ladybugs & Fireflies [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children (grades 1-6) learn about insects and other small critters. All aspects of bug life are touched upon, including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic…

Towards Easing the Diagnosis of Bugs in OS Code

DEFF Research Database (Denmark)

Stuart, Henrik; Hansen, René Rydhof; Lawall, Julia Laetitia

2007-01-01

The rapid detection and treatment of bugs in operating systems code is essential to maintain the overall security and dependability of a computing system.  A number of techniques have been proposed for detecting bugs, but little has been done to help developers analyze and treat them.  In this pa......The rapid detection and treatment of bugs in operating systems code is essential to maintain the overall security and dependability of a computing system.  A number of techniques have been proposed for detecting bugs, but little has been done to help developers analyze and treat them.......  In this paper we propose to combine bug-finding rules with transformations that automatically introduce bug-fixes or workarounds when a possible bug is detected.  This work builds on our previous work on the Coccinelle tool, which targets device driver evolution....

Variability Bugs in Highly Configurable Systems: A Qualitative Analysis

DEFF Research Database (Denmark)

Abal, Iago; Melo, Jean; Stanciulescu, Stefan

2018-01-01

Variability-sensitive verification pursues effective analysis of the exponentially many variants in number of features of a program family. Several variability-aware techniques have been proposed, but researchers still lack examples of concrete bugs induced by variability, occurring in real large......-scale systems. A collection of real world bugs is needed to evaluate tool implementations of variability-sensitive analyses by testing them on real bugs. We present a qualitative study of 98 diverse variability bugs collected from bug-fixing commits in the Apache, BusyBox, Linux kernel and Marlin repositories....... We analyze each of the bugs, and record the results in a database. For each bug, we create a self-contained simplified C99 version and a simplified patch, in order to help researchers who are not experts on these subject studies to understand them, so that they can use it for evaluation...

Application methods and insecticides for controlling stink bugs in soybean/ Métodos de aplicação e inseticidas no controle de percevejos na cultura da soja

Directory of Open Access Journals (Sweden)

Clérison Régis Perini

Full Text Available Insecticides application is the most widely used form to control stink bugs in soybean, being the application technology and the insecticide used the major factors for an efficient control. The experiment was conducted in a soybean field during the 2008/09 growing season, in São Sepé, RS, in order to evaluate efficiency of three methods of application and two insecticides for controlling stink bugs in soybeans. The experimental design used was completely randomized, in a factorial scheme 3x2 +1 control, with five replicates. The experimental units had dimensions of 40.0 x 40.0 m. The factor A was represented by the methods of application, as follows: A1- Tractorized spray with hydraulic nozzle; A2- Aerial, with rotary disc atomizers and A3- Aerial, with hydraulic nozzles. The factor B was represented by the insecticides, as follows: B1- thiamethoxam + lambda-cyhalothrin and B2-acephate. Ground and aerial applications with low volume oily had greater efficiency for controlling stink bugs in soybean, where led to an increase in soybean grain yield. Insecticides thiamethoxam + lambda-cyhalothrin and acephate were similar in controlling stink bugs and in residual effect.A aplicação de inseticidas é a forma mais utilizada no controle de percevejos na cultura da soja, sendo a escolha da tecnologia de aplicação e do inseticida fundamental para obtenção de um controle eficiente. O experimento foi desenvolvido em lavoura comercial de soja, na safra agrícola 2008/09, em São Sepé, RS, com o objetivo de avaliar a eficiência de três métodos de aplicação e dois inseticidas no controle de percevejos na soja. O delineamento experimental utilizado foi inteiramente casualizado, em esquema fatorial 3x2+1 testemunha, com cinco repetições. As unidades experimentais tiveram dimensões de 40,0 x 40,0 m. O fator A foi representado pelos métodos de aplicação, sendo: A1- Terrestre com pontas hidráulicas, A2- Aérea, com atomizadores rotativos de

Assassin bug uses aggressive mimicry to lure spider prey.

Science.gov (United States)

Wignall, Anne E; Taylor, Phillip W

2011-05-07

Assassin bugs (Stenolemus bituberus) hunt web-building spiders by invading the web and plucking the silk to generate vibrations that lure the resident spider into striking range. To test whether vibrations generated by bugs aggressively mimic the vibrations generated by insect prey, we compared the responses of spiders to bugs with how they responded to prey, courting male spiders and leaves falling into the web. We also analysed the associated vibrations. Similar spider orientation and approach behaviours were observed in response to vibrations from bugs and prey, whereas different behaviours were observed in response to vibrations from male spiders and leaves. Peak frequency and duration of vibrations generated by bugs were similar to those generated by prey and courting males. Further, vibrations from bugs had a temporal structure and amplitude that were similar to vibrations generated by leg and body movements of prey and distinctly different to vibrations from courting males or leaves, or prey beating their wings. To be an effective predator, bugs do not need to mimic the full range of prey vibrations. Instead bugs are general mimics of a subset of prey vibrations that fall within the range of vibrations classified by spiders as 'prey'.

Stink Bug Feeding Induces Fluorescence in Developing Cotton Bolls

Directory of Open Access Journals (Sweden)

Toews Michael D

2011-08-01

Full Text Available Abstract Background Stink bugs (Hemiptera: Pentatomidae comprise a critically important insect pest complex affecting 12 major crops worldwide including cotton. In the US, stink bug damage to developing cotton bolls causes boll abscission, lint staining, reduced fiber quality, and reduced yields with estimated losses ranging from 10 to 60 million dollars annually. Unfortunately, scouting for stink bug damage in the field is laborious and excessively time consuming. To improve scouting accuracy and efficiency, we investigated fluorescence changes in cotton boll tissues as a result of stink bug feeding. Results Fluorescent imaging under long-wave ultraviolet light showed that stink bug-damaged lint, the inner carpal wall, and the outside of the boll emitted strong blue-green fluorescence in a circular region near the puncture wound, whereas undamaged tissue emissions occurred at different wavelengths; the much weaker emission of undamaged tissue was dominated by chlorophyll fluorescence. We further characterized the optimum emission and excitation spectra to distinguish between stink bug damaged bolls from undamaged bolls. Conclusions The observed characteristic fluorescence peaks associated with stink bug damage give rise to a fluorescence-based method to rapidly distinguish between undamaged and stink bug damaged cotton bolls. Based on the fluorescent fingerprint, we envision a fluorescence reflectance imaging or a fluorescence ratiometric device to assist pest management professionals with rapidly determining the extent of stink bug damage in a cotton field.

Biology, Pest Status, Microbiome and Control of Kudzu Bug (Hemiptera: Heteroptera: Plataspidae): A New Invasive Pest in the U.S.

Science.gov (United States)

Dhammi, Anirudh; van Krestchmar, Jaap B.; Ponnusamy, Loganathan; Bacheler, Jack S.; Reisig, Dominic D.; Herbert, Ames; Del Pozo-Valdivia, Alejandro I.; Roe, R. Michael

2016-01-01

Soybean is an important food crop, and insect integrated pest management (IPM) is critical to the sustainability of this production system. In recent years, the introduction into the United States of the kudzu bug currently identified as Megacopta cribraria (F.), poses a threat to soybean production. The kudzu bug was first discovered in the state of Georgia, U.S. in 2009 and since then has spread to most of the southeastern states. Because it was not found in the North American subcontinent before this time, much of our knowledge of this insect comes from research done in its native habitat. However, since the U.S. introduction, studies have been undertaken to improve our understanding of the kudzu bug basic biology, microbiome, migration patterns, host selection and management in its expanding new range. Researchers are not only looking at developing IPM strategies for the kudzu bug in soybean, but also at its unique relationship with symbiotic bacteria. Adult females deposit bacterial packets with their eggs, and the neonates feed on these packets to acquire the bacteria, Candidatus Ishikawaella capsulata. The kudzu bug should be an informative model to study the co-evolution of insect function and behavior with that of a single bacteria species. We review kudzu bug trapping and survey methods, the development of bioassays for insecticide susceptibility, insecticide efficacy, host preferences, impact of the pest on urban environments, population expansion, and the occurrence of natural enemies. The identity of the kudzu bug in the U.S. is not clear. We propose that the kudzu bug currently accepted as M. cribraria in the U.S. is actually Megacopta punctatissima, with more work needed to confirm this hypothesis. PMID:27649166

Kissing Bug ( spp. Intrusion into Homes: Troublesome Bites and Domiciliation

Directory of Open Access Journals (Sweden)

Stephen A. Klotz

2016-01-01

Full Text Available Kissing bugs ( Triatoma spp. frequently enter homes and bite human and pet occupants. Bites may lead to severe allergic reactions and, in some cases, death. Kissing bugs are also vectors of Trypanosoma cruzi , the cause of Chagas disease. In general, modern houses in the United States are not conducive to domiciliation of kissing bugs (bugs living out their entire life within the home with the presence of eggs, nymphs, adults, and exuviae. Construction features such as concrete foundations, solid walls and ceilings, window screens, tight thresholds for doors and windows, and other measures impede bug entry into homes, and air conditioning reduces the need for open doors and windows. Where Chagas disease is endemic in Mexico and Central and South America, homes often have thatch roofs, adobe walls, and open doors and windows. We investigated numerous instances of kissing bug intrusions into homes in Southern Arizona, California, and Louisiana and documented the reactions to kissing bug bites. Our work confirms the importance of modern home construction in limiting kissing bug intrusions. Older homes, especially those lacking modern screening, caulking, and weather stripping to reduce air leakage, may be subject to kissing bug intrusions and domiciliation. We describe a community in Southern Arizona where domiciliation of homes by Triatoma recurva is common. We also provide recent data regarding kissing bug bites and allergic reactions to the bites.

Mining Bug Databases for Unidentified Software Vulnerabilities

Energy Technology Data Exchange (ETDEWEB)

Dumidu Wijayasekara; Milos Manic; Jason Wright; Miles McQueen

2012-06-01

Identifying software vulnerabilities is becoming more important as critical and sensitive systems increasingly rely on complex software systems. It has been suggested in previous work that some bugs are only identified as vulnerabilities long after the bug has been made public. These vulnerabilities are known as hidden impact vulnerabilities. This paper discusses the feasibility and necessity to mine common publicly available bug databases for vulnerabilities that are yet to be identified. We present bug database analysis of two well known and frequently used software packages, namely Linux kernel and MySQL. It is shown that for both Linux and MySQL, a significant portion of vulnerabilities that were discovered for the time period from January 2006 to April 2011 were hidden impact vulnerabilities. It is also shown that the percentage of hidden impact vulnerabilities has increased in the last two years, for both software packages. We then propose an improved hidden impact vulnerability identification methodology based on text mining bug databases, and conclude by discussing a few potential problems faced by such a classifier.

Bug City: Crickets, Grasshoppers & Friends [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children (grades 1-6) learn about insects and other small critters. All aspects of bug life are touched upon, including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic…

Bug City: Spiders and Scorpions [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Bug City: Butterflies and Moths [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Species composition, monitoring, and feeding injury of stink bugs (Heteroptera: Pentatomidae) in blackberry.

Science.gov (United States)

Brennan, S A; Liburd, O E; Eger, J E; Rhodes, E M

2013-04-01

Blackberry (Rubus spp.) production in Florida has increased > 100% within the past two decades. and several insect pests, including stink bugs (Heteroptera: Pentatomidae), have been observed feeding on this crop. The objectives for this study were to determine the stink bug species present in blackberry; to develop monitoring tools for stink bugs in blackberry; and to describe feeding injury to blackberries by Euschistus quadrator Rolston, a relatively new stink bug pest to Florida, that has spread throughout the state. In a field survey, E. quadrator was the most abundant stink bug species, followed by Euschistus servus Say, Euschistus obscurus (Palisot de Beauvois), Thyanta custator (F.), Proxys punctulatus (Palisot de Beauvois), and Podisus maculiventris Say. Yellow pyramid traps caught more stink bugs than tube traps with or without the addition of Euschistus spp. pheromone lures. There were no statistical differences between traps baited with a Trécé Pherocon Centrum lure, a Suterra Scenturion lure, and an unbaited trap. These results were supported by Y-tube olfactometer assays with E. quadrator where there were no differences between pheromone baited lures and a control. Injury to berries caused by E. quadrator adults and third instars was similar, and both adults and third instars fed more on green berries compared with turning berries. In addition, adults fed more on green berries compared with ripe fruit. The most common injury to green berries was discoloration. In contrast, misshapen drupelets were commonly seen on turning and ripe berries. The potential for managing stink bugs in blackberries to prevent them from reaching damaging levels is discussed.

Machine Learning or Information Retrieval Techniques for Bug Triaging: Which is better?

Directory of Open Access Journals (Sweden)

Anjali Goyal

2017-07-01

Full Text Available Bugs are the inevitable part of a software system. Nowadays, large software development projects even release beta versions of their products to gather bug reports from users. The collected bug reports are then worked upon by various developers in order to resolve the defects and make the final software product more reliable. The high frequency of incoming bugs makes the bug handling a difficult and time consuming task. Bug assignment is an integral part of bug triaging that aims at the process of assigning a suitable developer for the reported bug who corrects the source code in order to resolve the bug. There are various semi and fully automated techniques to ease the task of bug assignment. This paper presents the current state of the art of various techniques used for bug report assignment. Through exhaustive research, the authors have observed that machine learning and information retrieval based bug assignment approaches are most popular in literature. A deeper investigation has shown that the trend of techniques is taking a shift from machine learning based approaches towards information retrieval based approaches. Therefore, the focus of this work is to find the reason behind the observed drift and thus a comparative analysis is conducted on the bug reports of the Mozilla, Eclipse, Gnome and Open Office projects in the Bugzilla repository. The results of the study show that the information retrieval based technique yields better efficiency in recommending the developers for bug reports.

NRFixer: Sentiment Based Model for Predicting the Fixability of Non-Reproducible Bugs

Directory of Open Access Journals (Sweden)

Anjali Goyal

2017-08-01

Full Text Available Software maintenance is an essential step in software development life cycle. Nowadays, software companies spend approximately 45\\% of total cost in maintenance activities. Large software projects maintain bug repositories to collect, organize and resolve bug reports. Sometimes it is difficult to reproduce the reported bug with the information present in a bug report and thus this bug is marked with resolution non-reproducible (NR. When NR bugs are reconsidered, a few of them might get fixed (NR-to-fix leaving the others with the same resolution (NR. To analyse the behaviour of developers towards NR-to-fix and NR bugs, the sentiment analysis of NR bug report textual contents has been conducted. The sentiment analysis of bug reports shows that NR bugs' sentiments incline towards more negativity than reproducible bugs. Also, there is a noticeable opinion drift found in the sentiments of NR-to-fix bug reports. Observations driven from this analysis were an inspiration to develop a model that can judge the fixability of NR bugs. Thus a framework, {NRFixer,} which predicts the probability of NR bug fixation, is proposed. {NRFixer} was evaluated with two dimensions. The first dimension considers meta-fields of bug reports (model-1 and the other dimension additionally incorporates the sentiments (model-2 of developers for prediction. Both models were compared using various machine learning classifiers (Zero-R, naive Bayes, J48, random tree and random forest. The bug reports of Firefox and Eclipse projects were used to test {NRFixer}. In Firefox and Eclipse projects, J48 and Naive Bayes classifiers achieve the best prediction accuracy, respectively. It was observed that the inclusion of sentiments in the prediction model shows a rise in the prediction accuracy ranging from 2 to 5\\% for various classifiers.

Kissing Bug (Triatoma spp.) Intrusion into Homes: Troublesome Bites and Domiciliation.

Science.gov (United States)

Klotz, Stephen A; Shirazi, F Mazda; Boesen, Keith; Beatty, Norman L; Dorn, Patricia L; Smith, Shannon; Schmidt, Justin O

2016-01-01

Kissing bugs (Triatoma spp.) frequently enter homes and bite human and pet occupants. Bites may lead to severe allergic reactions and, in some cases, death. Kissing bugs are also vectors of Trypanosoma cruzi, the cause of Chagas disease. In general, modern houses in the United States are not conducive to domiciliation of kissing bugs (bugs living out their entire life within the home with the presence of eggs, nymphs, adults, and exuviae). Construction features such as concrete foundations, solid walls and ceilings, window screens, tight thresholds for doors and windows, and other measures impede bug entry into homes, and air conditioning reduces the need for open doors and windows. Where Chagas disease is endemic in Mexico and Central and South America, homes often have thatch roofs, adobe walls, and open doors and windows. We investigated numerous instances of kissing bug intrusions into homes in Southern Arizona, California, and Louisiana and documented the reactions to kissing bug bites. Our work confirms the importance of modern home construction in limiting kissing bug intrusions. Older homes, especially those lacking modern screening, caulking, and weather stripping to reduce air leakage, may be subject to kissing bug intrusions and domiciliation. We describe a community in Southern Arizona where domiciliation of homes by Triatoma recurva is common. We also provide recent data regarding kissing bug bites and allergic reactions to the bites.

Early perception of stink bug damage in developing seeds of field-grown soybean induces chemical defences and reduces bug attack.

Science.gov (United States)

Giacometti, Romina; Barneto, Jesica; Barriga, Lucia G; Sardoy, Pedro M; Balestrasse, Karina; Andrade, Andrea M; Pagano, Eduardo A; Alemano, Sergio G; Zavala, Jorge A

2016-08-01

Southern green stink bugs (Nezara viridula L.) invade field-grown soybean crops, where they feed on developing seeds and inject phytotoxic saliva, which causes yield reduction. Although leaf responses to herbivory are well studied, no information is available about the regulation of defences in seeds. This study demonstrated that mitogen-activated protein kinases MPK3, MPK4 and MPK6 are expressed and activated in developing seeds of field-grown soybean and regulate a defensive response after stink bug damage. Although 10-20 min after stink bug feeding on seeds induced the expression of MPK3, MPK6 and MPK4, only MPK6 was phosphorylated after damage. Herbivory induced an early peak of jasmonic acid (JA) accumulation and ethylene (ET) emission after 3 h in developing seeds, whereas salicylic acid (SA) was also induced early, and at increasing levels up to 72 h after damage. Damaged seeds upregulated defensive genes typically modulated by JA/ET or SA, which in turn reduced the activity of digestive enzymes in the gut of stink bugs. Induced seeds were less preferred by stink bugs. This study shows that stink bug damage induces seed defences, which is perceived early by MPKs that may activate defence metabolic pathways in developing seeds of field-grown soybean. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Neurohormones implicated in the control of Malpighian tubule secretion in plant sucking Heteropterans: The stink bugs Acrosternum hilare and Nezara viridula

Science.gov (United States)

Plant sucking heteropteran bugs feed regularly on small amounts of K+rich plant material, in contrast to their hematophagous relatives which imbibe large volumes of Na+-rich blood. It was anticipated that this would be reflected in the endocrine control of MT secretion. To explore this, neuroendocri...

Residual infestation and recolonization during urban Triatoma infestans Bug Control Campaign, Peru.

Science.gov (United States)

Barbu, Corentin M; Buttenheim, Alison M; Pumahuanca, Maria-Luz Hancco; Calderón, Javier E Quintanilla; Salazar, Renzo; Carrión, Malwina; Rospigliossi, Andy Catacora; Chavez, Fernando S Malaga; Alvarez, Karina Oppe; Cornejo del Carpio, Juan; Náquira, César; Levy, Michael Z

2014-12-01

Chagas disease vector control campaigns are being conducted in Latin America, but little is known about medium-term or long-term effectiveness of these efforts, especially in urban areas. After analyzing entomologic data for 56,491 households during the treatment phase of a Triatoma infestans bug control campaign in Arequipa, Peru, during 2003-2011, we estimated that 97.1% of residual infestations are attributable to untreated households. Multivariate models for the surveillance phase of the campaign obtained during 2009-2012 confirm that nonparticipation in the initial treatment phase is a major risk factor (odds ratio [OR] 21.5, 95% CI 3.35-138). Infestation during surveillance also increased over time (OR 1.55, 95% CI 1.15-2.09 per year). In addition, we observed a negative interaction between nonparticipation and time (OR 0.73, 95% CI 0.53-0.99), suggesting that recolonization by vectors progressively dilutes risk associated with nonparticipation. Although the treatment phase was effective, recolonization in untreated households threatens the long-term success of vector control.

Model-free adaptive control of supercritical circulating fluidized-bed boilers

Science.gov (United States)

Cheng, George Shu-Xing; Mulkey, Steven L

2014-12-16

A novel 3-Input-3-Output (3.times.3) Fuel-Air Ratio Model-Free Adaptive (MFA) controller is introduced, which can effectively control key process variables including Bed Temperature, Excess O2, and Furnace Negative Pressure of combustion processes of advanced boilers. A novel 7-input-7-output (7.times.7) MFA control system is also described for controlling a combined 3-Input-3-Output (3.times.3) process of Boiler-Turbine-Generator (BTG) units and a 5.times.5 CFB combustion process of advanced boilers. Those boilers include Circulating Fluidized-Bed (CFB) Boilers and Once-Through Supercritical Circulating Fluidized-Bed (OTSC CFB) Boilers.

Finding error handling bugs in OpenSSL using Coccinelle

DEFF Research Database (Denmark)

Lawall, Julia; Laurie, Ben; Hansen, René Rydhof

2010-01-01

OpenSSL is a library providing various functionalities relating to secure network communication.  Detecting and fixing bugs in OpenSSL code is thus essential, particularly when such bugs can lead to malicious attacks.  In previous work, we have proposed a methodology for finding API usage protocols...... in Linux kernel code using the program matching and transformation engine Coccinelle.  In this work, we report on our experience in applying this methodology to OpenSSL, focusing on API usage protocols related to error handling.  We have detected over 30 bugs in a recent OpenSSL snapshot, and in many cases...... it was possible to correct the bugs automatically.  Our patches correcting these bugs have been accepted by the OpenSSL developers.  This work furthermore confirms the applicability of our methodology to user-level code....

Bug City: House and Backyard Insects [Videotape].

Science.gov (United States)

1998

"Bug City" is a video series created to help children learn about insects and other small critters. All aspects of bug life are touched upon including body structure, food, habitat, life cycle, mating habits, camouflage, mutualism (symbiosis), adaptations, social behavior, and more. Each program features dramatic microscopic photography,…

Comparative susceptibilities of different life stages of the tarnished plant bug (Hemiptera: miridae) to three classes of insecticide

Science.gov (United States)

Insecticidal control of the tarnished plant bug, Lygus lineolaris (Palisot de Beauvois), is targeted at the adult and nymphal stages, but there is little information on relative susceptibilities of these insects to insecticides. Tarnished plant bug adults were collected from various locations in Mi...

Effective Bug Finding in C Programs with Shape and Effect Abstractions

DEFF Research Database (Denmark)

Abal, Iago; Brabrand, Claus; Wasowski, Andrzej

2017-01-01

Software projects tend to suffer from conceptually simple resource manipulation bugs, such as accessing a de-allocated memory region, or acquiring a non-reentrant lock twice. Static code scanners are used extensively to remove these bugs from projects like the Linux kernel. Yet, when the manipula......Software projects tend to suffer from conceptually simple resource manipulation bugs, such as accessing a de-allocated memory region, or acquiring a non-reentrant lock twice. Static code scanners are used extensively to remove these bugs from projects like the Linux kernel. Yet, when...... the Linux kernel. Our results show that our tool is more effective at finding bugs than similar code-scanning tools. EBA analyzes the drivers/ directory of Linux (nine thousand files) in less than thirty minutes, and uncovers a handful previously unknown double-lock bugs in various drivers....

Between-group transmission dynamics of the swallow bug, Oeciacus vicarius.

Science.gov (United States)

Brown, Charles R; Brown, Mary Bomberger

2005-06-01

The parasitic cimicid swallow bug, Oeciacus vicarius, is the principal invertebrate vector for Buggy Creek virus (BCRV) and has also been associated with Venezuelan equine encephalitis virus. To help understand the spread of this vector, we experimentally measured the transmission of O. vicarius between groups (colonies) of its main host, the cliff swallow (Petrochelidonpyrrhonota), in the field. Transmission of bugs between colonies varied significantly with year, size of the colony, and week within the season. Bug immigration into sites tended to peak in mid-summer. Swallow nests in larger colonies had more consistent rates of bug introduction than did nests in small colonies, but within a colony a given nest's weekly immigrant-bug count varied widely across the season. Transmission of O. vicarius between host social groups follows broadly predictable seasonal patterns, but there is nevertheless temporal and spatial heterogeneity in bug transmission. By understanding how long-distance movement by this vector varies in time and space, we can better predict where and when BCRV epizootics may occur.

Implementation of the e-Bug Project in Greece.

Science.gov (United States)

Gennimata, Dimitra; Merakou, Kyriakoula; Barbouni, Anastasia; Kremastinou, Jenny

2011-06-01

The e-Bug pack and web site educational material has been translated and adapted to the Greek language and educational background, and implemented throughout Greece as a supplementary educational resource in elementary and junior high schools. Elementary and junior high school teachers in Greece have actively participated in the development of the e-Bug educational resource and supported the implementation of all e-Bug activities. Dissemination to all key national stakeholders has been undertaken, and endorsement has been obtained from educational and medical associations, societies and institutions. Independent evaluation has been carried out, as part of dissertation thesis projects, for postgraduate studies. The e-Bug educational resource provides all the essentials for the dissemination of good health behaviours in hygiene, monitoring the spread of infection and the prudent use of antibiotics, to the youth of this country. Its contribution is expected to be evident in the next adult generation.

Residual Infestation and Recolonization during Urban Triatoma infestans Bug Control Campaign, Peru1

Science.gov (United States)

Buttenheim, Alison M.; Pumahuanca, Maria-Luz Hancco; Calderón, Javier E. Quintanilla; Salazar, Renzo; Carrión, Malwina; Rospigliossi, Andy Catacora; Chavez, Fernando S. Malaga; Alvarez, Karina Oppe; Cornejo del Carpio, Juan; Náquira, César; Levy, Michael Z.

2014-01-01

Chagas disease vector control campaigns are being conducted in Latin America, but little is known about medium-term or long-term effectiveness of these efforts, especially in urban areas. After analyzing entomologic data for 56,491 households during the treatment phase of a Triatoma infestans bug control campaign in Arequipa, Peru, during 2003–2011, we estimated that 97.1% of residual infestations are attributable to untreated households. Multivariate models for the surveillance phase of the campaign obtained during 2009–2012 confirm that nonparticipation in the initial treatment phase is a major risk factor (odds ratio [OR] 21.5, 95% CI 3.35–138). Infestation during surveillance also increased over time (OR 1.55, 95% CI 1.15–2.09 per year). In addition, we observed a negative interaction between nonparticipation and time (OR 0.73, 95% CI 0.53–0.99), suggesting that recolonization by vectors progressively dilutes risk associated with nonparticipation. Although the treatment phase was effective, recolonization in untreated households threatens the long-term success of vector control. PMID:25423045

Learning from Mistakes --- A Comprehensive Study on Real World Concurrency Bug Characteristics

International Nuclear Information System (INIS)

Shan Lu; Soyeon Park; Eunsoo Seo; Yuanyuan Zhou

2008-01-01

The reality of multi-core hardware has made concurrent programs pervasive. Unfortunately, writing correct concurrent programs is difficult. Addressing this challenge requires advances in multiple directions, including concurrency bug detection, concurrent program testing, concurrent programming model design, etc. Designing effective techniques in all these directions will significantly benefit from a deep understanding of real world concurrency bug characteristics. This paper provides the first (to the best of our knowledge) comprehensive real world concurrency bug characteristic study. Specifically, we have carefully examined concurrency bug patterns, manifestation, and fix strategies of 105 randomly selected real world concurrency bugs from 4 representative server and client opensource applications (MySQL, Apache, Mozilla and OpenOffice). Our study reveals several interesting findings and provides useful guidance for concurrency bug detection, testing, and concurrent programming language design. Some of our findings are as follows: (1) Around one third of the examined non-deadlock concurrency bugs are caused by violation to programmers order intentions, which may not be easily expressed via synchronization primitives like locks and transactional memories; (2) Around 34% of the examined non-deadlock concurrency bugs involve multiple variables, which are not well addressed by existing bug detection tools; (3) About 92% of the examined concurrency bugs can be reliably triggered by enforcing certain orders among no more than 4 memory accesses. This indicates that testing concurrent programs can target at exploring possible orders among every small groups of memory accesses, instead of among all memory accesses; (4) About 73% of the examined non-deadlock concurrency bugs were not fixed by simply adding or changing locks, and many of the fixes were not correct at the first try, indicating the difficulty of reasoning concurrent execution by programmers.

Implications of Lessons Learned From Tobacco Control for Tanning Bed Reform

Science.gov (United States)

Sinclair, Craig

2013-01-01

Tanning beds used according to the manufacturer’s instructions expose the user to health risks, including melanoma and other skin cancers. Applying the MPOWER model (monitor, protect, offer alternatives, warn, enforce, and raise taxes), which has been used in tobacco control, to tanning bed reform could reduce the number of people at risk of diseases associated with tanning bed use. Among the tactics available to government are restricting the use of tanning beds by people under age 18 and those with fair skin, increasing the price of tanning bed services through taxation, licensing tanning bed operators, and banning unsupervised tanning bed operations. PMID:23449282

Four bugs on a rectangle

KAUST Repository

Chapman, S. J.

2010-11-10

The idealized mathematical problem of four bugs in cyclic pursuit starting from a 2-by-1 rectangle is considered, and asymptotic formulas are derived to describe the motion. In contrast to the famous case of four bugs on a square, here the trajectories quickly freeze to essentially one dimension. After the first rotation about the centre point, the scale of the configuration has shrunk by a factor of 10427907250, and this number is then exponentiated four more times with each successive cycle. Relations to Knuth\\'s double-arrow notation and level-index arithmetic are discussed. This journal is © 2011 The Royal Society.

BUGS at work : a bicycle user group guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This guide provides practical advice to cyclists on how start a Bicycle User Group (BUG) at their workplace. It offers tools to encourage employers to be proactive in improving facilities in support of cycle commuting. Several BUGs across Canada have worked towards getting better bicycle parking, lockers and shower facilities at their workplace. Other incentives include policies such as flexible work hours for cyclist commuters; casual dress on Friday; reimbursement for the subsidized cost of free parking provided by employers; and, use of a company car if needed for company business during the work day. The advantages to employers include: reduced health care costs because cyclists are physically fit; decreased absenteeism; increased productivity; reduced parking costs; lower company transportation bills; and, a greener corporate image. BUGs provide cycling information ranging from cycling maps to pamphlets and they raise cycle awareness. This guide includes cycling survey samples and examples of successful BUG activities across Canada. refs., tabs., figs.

Exploring Parental Bonding in BED and Non-BED Obesity Compared with Healthy Controls: Clinical, Personality and Psychopathology Correlates.

Science.gov (United States)

Amianto, Federico; Ercole, Roberta; Abbate Daga, Giovanni; Fassino, Secondo

2016-05-01

Early inadequate attachment experiences are relevant co-factors in the development of obesity and Binge Eating Disorder (BED), which often concurs with obesity. The relationship of parental bonding with personality and psychopathology may influence treatment strategies for obese subjects, either affected or not with BED. In this study, 443 obese women (BMI ≥ 30 kg/m(2)), including 243 with and 200 without BED, and 158 female controls were assessed with regards to attachment, personality and eating psychopathology measures. Clusters obtained using the scores of the Parental Bonding Instrument (PBI) were compared with each other and with a control subjects' group. Lower scores of parental bonding distinguished obese subjects with respect to healthy controls. The cluster analysis revealed two clusters of parenting among obese subjects. The larger one displayed intermediate care and overprotection between controls and the smaller cluster, with the exception of paternal overprotection which is similar to controls. This larger cluster was characterized by low persistence and levels of psychopathology which are intermediate between healthy controls and the smaller cluster. The smaller cluster displayed lower care and higher overcontrol from both parents. It also displays more extreme personality traits (high novelty seeking and harm avoidance, and lower self-directedness and cooperativeness) and more severe eating and general psychopathology. Different parenting dynamics relate to different personality patterns and eating psychopathology of obese subjects, but not to binge eating conducts. Personality differences between parenting clusters are more extensive than those between BED and non-BED subgroups. The two different typologies of obese subjects based on parenting may be relevant for treatment personalization. Copyright © 2015 John Wiley & Sons, Ltd and Eating Disorders Association.

Granular controls on the dispersion of bed load tracers

Science.gov (United States)

Jerolmack, D. J.; Martin, R. L.; Phillips, C. B.

2014-12-01

Coarse particles are transported in a river as bed load, i.e., they move in frequent contact with and are supported by the granular bed. This movement is typically intermittent and may be described by a series of steps are rests, the distributions of which determine particle dispersion. Laboratory and field studies of bed load tracer dispersion have reported sub- and super-diffusive behavior, both of which have been successfully reproduced with stochastic transport models. Although researchers have invoked heavy-tailed step lengths as the cause of anomalous dispersion, most observations report thin-tailed distributions. Little attention has been paid to rest periods, and stochastic transport models have not been connected to the underlying mechanics of particle motion. Based on theoretical and experimental evidence, we argue that step lengths are thin-tailed and do not control the longterm dispersion of bed load tracers; they are determined by momentum balance between the fluid and solid. Using laboratory experiments with both marbles and natural sediments, we demonstrate that the rest time distribution is power law, and argue that this distribution controls asymptotic dispersion. Observed rest times far exceed any hydrodynamic timescale. Experiments reveal that rest times of deposited particles are governed by fluctuations in river bed elevation; in particular, the return time for the bed to scour to the base of a deposited particle. Stochastic fluctuations in bed elevation are describable by an Ornstein-Uhlenbeck (mean-reverting random walk) model that contains two parameters, which we show are directly related to the granular shear rate and range of bed elevation fluctuations, respectively. Combining these results with the theory of asymmetric random walks (particles only move downstream), we predict superdiffusive behavior that is in quantitative agreement with our observations of tracer dispersion in a natural river.

The chemical volatiles (semiochemicals) produced by neo tropical stink bugs (Hemiptera: Pentatomidae)

Energy Technology Data Exchange (ETDEWEB)

Moraes, Maria C.B.; Pareja, Martin; Laumann, Raul A.; Borges, Miguel [EMBRAPA Recursos Geneticos e Biotecnologia, Brasilia, DF (Brazil). Nucleo Tematico Controle Biologico

2008-09-15

In recent years the growing concern about environmental changes and how we are using the natural resources have triggered a search for natural products as alternatives to synthetic pesticides. The stink bugs produce a wide variety of chemical compounds (semiochemicals) that show potential to manage these insects. The stink bugs Chinavia impicticornis (Stal), C. ubica (Rolston), Dichelops melacanthus (Dallas), Euschistus heros (F.), Piezodorus guildinii (Westwood), Thyanta perditor (Westwood) and Tibraca limbativentris (Stal) had their blends of defensive compounds evaluated both qualitative and quantitatively. The main compounds identified on the glands of Brazilian stink bugs are: 2-alkenals, mainly the E isomer; saturated aliphatic hydrocarbons; and 4 oxo-(E)-2-alkenals. The first sex attractant determined from a stink bug was obtained from Nezara viridula L., and consists on a mix of two isomers cis - and trans bisabolene-epoxides. Later the soybean stink bug E. heros was also studied and its sex attractant was identified as three esters methyl: 2,6,10-trimethyl decanoate, methyl 2,6,10-trimethyl dodecanoate, and methyl E2, Z4-decadienoate. Recently, three new Brazilian sting bugs were studied and had their sex attractant elucidated. Males of T. perditor produce the ester, methyl 2E, 4Z, 6Z-decatrienoate. Whereas, the stink bug, P. guildinii has as sexual pheromone, the sesquiterpene beta-sesqui phellandrene, and the stink bug T. limbativentris produces as sex attractant the zingiberenol. In this review we discuss the advances obtained on the behaviour and identification of sex and defensive compound of stink bugs from Brazilian crops and the application of this knowledge to manage the stink bugs. (author)

The chemical volatiles (semiochemicals) produced by neo tropical stink bugs (Hemiptera: Pentatomidae)

International Nuclear Information System (INIS)

Moraes, Maria C.B.; Pareja, Martin; Laumann, Raul A.; Borges, Miguel

2008-01-01

In recent years the growing concern about environmental changes and how we are using the natural resources have triggered a search for natural products as alternatives to synthetic pesticides. The stink bugs produce a wide variety of chemical compounds (semiochemicals) that show potential to manage these insects. The stink bugs Chinavia impicticornis (Stal), C. ubica (Rolston), Dichelops melacanthus (Dallas), Euschistus heros (F.), Piezodorus guildinii (Westwood), Thyanta perditor (Westwood) and Tibraca limbativentris (Stal) had their blends of defensive compounds evaluated both qualitative and quantitatively. The main compounds identified on the glands of Brazilian stink bugs are: 2-alkenals, mainly the E isomer; saturated aliphatic hydrocarbons; and 4 oxo-(E)-2-alkenals. The first sex attractant determined from a stink bug was obtained from Nezara viridula L., and consists on a mix of two isomers cis - and trans bisabolene-epoxides. Later the soybean stink bug E. heros was also studied and its sex attractant was identified as three esters methyl: 2,6,10-trimethyl decanoate, methyl 2,6,10-trimethyl dodecanoate, and methyl E2, Z4-decadienoate. Recently, three new Brazilian sting bugs were studied and had their sex attractant elucidated. Males of T. perditor produce the ester, methyl 2E, 4Z, 6Z-decatrienoate. Whereas, the stink bug, P. guildinii has as sexual pheromone, the sesquiterpene beta-sesqui phellandrene, and the stink bug T. limbativentris produces as sex attractant the zingiberenol. In this review we discuss the advances obtained on the behaviour and identification of sex and defensive compound of stink bugs from Brazilian crops and the application of this knowledge to manage the stink bugs. (author)

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... var c = 0; c Tips to prevent and treat bug bites Although most bug bites are harmless, some can spread dangerous diseases like Zika virus, dengue, Lyme disease, and malaria. Particularly if you’re ...

Automated Bug Assignment: Ensemble-based Machine Learning in Large Scale Industrial Contexts

OpenAIRE

Jonsson, Leif; Borg, Markus; Broman, David; Sandahl, Kristian; Eldh, Sigrid; Runeson, Per

2016-01-01

Bug report assignment is an important part of software maintenance. In particular, incorrect assignments of bug reports to development teams can be very expensive in large software development projects. Several studies propose automating bug assignment techniques using machine learning in open source software contexts, but no study exists for large-scale proprietary projects in industry. The goal of this study is to evaluate automated bug assignment techniques that are based on machine learni...

Modified bug-1 algorithm based strategy for obstacle avoidance in multi robot system

Directory of Open Access Journals (Sweden)

Kandathil Jom J.

2018-01-01

Full Text Available One of the primary ability of an intelligent mobile robot system is obstacle avoidance. BUG algorithms are classic examples of the algorithms used for achieving obstacle avoidance. Unlike many other planning algorithms based on global knowledge, BUG algorithms assume only local knowledge of the environment and a global goal. Among the variations of the BUG algorithms that prevail, BUG-0, BUG-1 and BUG-2 are the more prominent versions. The exhaustive search algorithm present in BUG-1 makes it more reliable and safer for practical applications. Overall, this provides a more predictable and dependable performance. Hence, the essential focus in this paper is on implementing the BUG-1 algorithm across a group of robots to move them from a start location to a target location. The results are compared with the results from BUG-1 algorithm implemented on a single robot. The strategy developed in this work reduces the time involved in moving the robots from starting location to the target location. Further, the paper shows that the total distance covered by each robot in a multi robot-system is always lesser than or equal to that travelled by a single robot executing the same problem.

Zero bugs and program faster

CERN Document Server

Thompson, Kate

2015-01-01

A book about programming, improving skill, and avoiding mistakes. The author spent two years researching every bug avoidance technique she could find. This book contains the best of them. If you want to program faster, with fewer bugs, and write more secure code, buy this book! "This is the best book I have ever read." - Anonymous reviewer "Four score and seven years ago this book helped me debug my server code." -Abraham Lincoln "Would my Javascript have memory leaks without this book? Would fishes fly without water?" -Socrates "This book is the greatest victory since the Spanish Armada, and the best about programming." -Queen Elizabeth

WinBUGSio: A SAS Macro for the Remote Execution of WinBUGS

Directory of Open Access Journals (Sweden)

Michael K. Smith

2007-09-01

Full Text Available This is a macro which facilitates remote execution of WinBUGS from within SAS. The macro pre-processes data for WinBUGS, writes the WinBUGS batch-script, executes this script and reads in output statistics from the WinBUGS log-file back into SAS native format. The user specifies the input and output file names and directory path as well as the statistics to be monitored in WinBUGS. The code works best for a model that has already been set up and checked for convergence diagnostics within WinBUGS. An obvious extension of the use of this macro is for running simulations where the input and output files all have the same name but all that differs between simulation iterations is the input dataset. The functionality and syntax of the macro call are described in this paper and illustrated using a simple linear regression model.

Evaluation of Blood Regimen on the Survival of Cimex lectularius L. Using Life Table Parameters

Directory of Open Access Journals (Sweden)

Edwin G. Rajotte

2013-06-01

Full Text Available Knowledge of bed bug development under varying conditions can lead to more sophisticated management techniques. Development rate, age and stage-specific life tables were compared for a laboratory strain (HS and field strain (ECL-05 of bed bug Cimex lectularius L. (Hemiptera: Heteroptera reared on two blood regimens: human or rabbit blood. Harlan and ECL-05 bed bugs reared on human blood had a life expectancy of 207 and 208 days respectively from the egg stage. Egg to adult development of HS bed bugs reared on human blood (~35 days was significantly longer than that of the ECL-05 strain (~33 days in the third, fourth, and fifth instars. The HS and ECL-05 bed bugs reared on rabbit blood had a life expectancy of 149 and 174 days respectively. Egg to adult development time of HS on rabbit blood (~52 days was significantly longer than ECL-05 (~37 days in every instar, and HS total life span was significantly shorter compared to ECL-05. Developmental differences based on strain and blood regimen suggest rabbit blood is an inferior blood source for colony maintenance, and strain has variable effects on bed bug development. Findings suggest that blood regimen should strongly be considered in bed bug colony maintenance.

Developing e-Bug web games to teach microbiology.

Science.gov (United States)

Farrell, David; Kostkova, Patty; Lazareck, Lisa; Weerasinghe, Dasun; Weinberg, Julius; Lecky, Donna M; Adriaenssens, Niels; Koprivová Herotová, Tereza; Holt, Jette; Touboul, Pia; Merakou, Kyriakoula; Koncan, Raffaella; Olczak-Pienkowska, Anna; Avô, António Brito; Campos, José; McNulty, Cliodna A M

2011-06-01

As a complement to the e-Bug teaching pack, two e-Bug games were developed to provide content that aimed to entertain as well as to educate. A set of agreed learning outcomes (LOs) were provided by the scientific partners of the e-Bug Project and the games were developed using user-centred design techniques (the needs, wants and limitations of the potential game players were assessed at each stage of the design process). The e-Bug games were designed for two age groups: Junior (9-12 year olds); and Senior (13-15 year olds). A study using focus groups was done to gain an understanding as to the types of games enjoyed by the target users. According to the preliminary study, the Junior Game was developed as a platform game and the Senior Game was developed as a story-based detective game. The Junior Game consists of five levels, each associated with a set of LOs. Similarly, the Senior Game consists of four missions, each comprising five stages using problem-based learning techniques and LOs. In this paper, the process of development for each game is described in detail and an illustration is provided of how each game level or mission addresses the target LOs. Development of the games used feedback acquired from children in four schools across the UK (Glasgow, London and two in Gloucester). The children were selected according to their willingness to participate. European Partners of the e-Bug Project also provided further support, translation and requests for modifications. The knowledge gained of LOs and further evaluation of the games is continuing, and preliminary results are in press. The final versions of the games, translated into 11 European languages, are available online via www.e-bug.eu.

Insect-specific irreversible inhibitors of acetylcholinesterase in pests including the bed bug, the eastern yellowjacket, German and American cockroaches, and the confused flour beetle.

Science.gov (United States)

Polsinelli, Gregory A; Singh, Sanjay K; Mishra, Rajesh K; Suranyi, Robert; Ragsdale, David W; Pang, Yuan-Ping; Brimijoin, Stephen

2010-09-06

Insecticides directed against acetylcholinesterase (AChE) are facing increased resistance among target species as well as increasing concerns for human toxicity. The result has been a resurgence of disease vectors, insects destructive to agriculture, and residential pests. We previously reported a free cysteine (Cys) residue at the entrance to the AChE active site in some insects but not higher vertebrates. We also reported Cys-targeting methanethiosulfonate molecules (AMTSn), which, under conditions that spared human AChE, caused total irreversible inhibition of aphid AChE, 95% inhibition of AChE from the malaria vector mosquito (Anopheles gambia), and >80% inhibition of activity from the yellow fever mosquito (Aedes aegypti) and northern house mosquito (Culex pipiens). We now find the same compounds inhibit AChE from cockroaches (Blattella germanica and Periplaneta americana), the flour beetle (Tribolium confusum), the multi-colored Asian ladybird beetle (Harmonia axyridis), the bed bug (Cimex lectularius), and a wasp (Vespula maculifrons), with IC(50) values of approximately 1-11muM. Our results support further study of Cys-targeting inhibitors as conceptually novel insecticides that may be free of resistance in a range of insect pests and disease vectors and, compared with current compounds, should demonstrate much lower toxicity to mammals, birds, and fish. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds

Directory of Open Access Journals (Sweden)

Jared A. Frank

2016-08-01

Full Text Available Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability.

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds.

Science.gov (United States)

Frank, Jared A; Brill, Anthony; Kapila, Vikram

2016-08-20

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability.

Catching the Bug: How Virtual Coaching Improves Teaching

Science.gov (United States)

Allen, Megan

2014-01-01

In this article the author describes virtual coaching and why it is so effective. The following six points of virtual coaching are explained: (1) Also known as bug-in-ear coaching, virtual coaching is not new; (2) Virtual coaching can save money and time; (3) Bug-in-ear coaching increases the frequency of observations for novice teachers; (4) It…

Implications of Lessons Learned From Tobacco Control for Tanning Bed Reform

OpenAIRE

Sinclair, Craig; Makin, Jennifer K.

2013-01-01

Tanning beds used according to the manufacturer?s instructions expose the user to health risks, including melanoma and other skin cancers. Applying the MPOWER model (monitor, protect, offer alternatives, warn, enforce, and raise taxes), which has been used in tobacco control, to tanning bed reform could reduce the number of people at risk of diseases associated with tanning bed use. Among the tactics available to government are restricting the use of tanning beds by people under age 18 and th...

How Does Bug-Handling Effort Differ Among Different Programming Languages?

OpenAIRE

Zhang, Jie; Li, Feng; Hao, Dan; Wang, Meng; Zhang, Lu

2018-01-01

Handling bugs is an essential part of software development. The impact of programming language on this task has long been a topic of much debate. For example, some people hold the view that bugs in Python are easy to handle because its code is easy to read and understand, while some others believe the absence of static typing in Python will lead to higher bug-handling effort. This paper presents the first large-scale study to investigate whether the ecosystems of different (categories of) pro...

Insects: Bugged Out!

Science.gov (United States)

Piehl, Kathy

2011-01-01

Insects really need no introduction. They have lived on earth much longer than humans and vastly outnumber people and all other animal species combined. People encounter them daily in their houses and yards. Yet, when children want to investigate insects, books can help them start their explorations. "Paleo Bugs" carries readers back to the time…

Pheromones of milkweed bugs (Heteroptera: Lygaeidae) attract wayward plant bugs: Phytocoris mirid sex pheromone.

Science.gov (United States)

Zhang, Qing-He; Aldrich, Jeffrey R

2003-08-01

The synthetic aggregation pheromone of the large milkweed bug, Oncopeltus fasciatus (Dallas) (Lygaeinae), also attracted males of the plant bug, Phytocoris difficilis Knight (Miridae). Field testing partial blends against the six-component blend comprising the Oncopeltus pheromone showed that cross-attraction of P. difficilis males was due to synergism between (E)-2-octenyl acetate and (E,E)-2,4-hexadienyl acetate. Hexyl acetate was abundant in the metathoracic scent gland (MSG) secretion of P. difficilis males, but because female P. difficilis could not initially be found in the field, further combinatorial tests were guided by prior research on the pheromones of two Phytocoris species in the western United States. The combination of hexyl, (E)-2-hexenyl, and (E)-2-octenyl acetates was as attractive to P. difficilis males as the milkweed bug pheromone, yet no milkweed bugs were drawn to this blend. Gas chromatographic (GC)-electroantennographic detection (EAD) and GC-mass spectrometric (MS) analyses of female P. difficilis MSGs determined that their secretion contained predominantly hexyl, (E)-2-hexenyl, and (E)-2-octenyl acetates (all strongly EAD-active)-the latter two compounds found only in trace amounts from males-plus five minor female-specific compounds, three of which were EAD-active. (E,E)-2,4-Hexadienyl acetate was not detected from P. difficilis females or males. The blend of the three major components, hexyl, (E)-2-hexenyl, and (E)-2-octenyl acetates (2:1.5:1 by volume), was as attractive as the blend of all six EAD-active compounds identified from females, indicating that this ternary blend constitutes the sex pheromone of P. difficilis. Hexyl acetate with (E)-2-octenyl acetate also attracted males of another species, P. breviusculus Reuter, but addition of (E)-2-hexenyl acetate and/or (E,E)-2,4-hexadienyl acetate inhibited attraction of P. breviusculus males. Attraction of P. difficilis males occurred mainly during the first half of scotophase. The

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds

OpenAIRE

Jared A. Frank; Anthony Brill; Vikram Kapila

2016-01-01

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their em...

Mounted Smartphones as Measurement and Control Platforms for Motor-Based Laboratory Test-Beds †

Science.gov (United States)

Frank, Jared A.; Brill, Anthony; Kapila, Vikram

2016-01-01

Laboratory education in science and engineering often entails the use of test-beds equipped with costly peripherals for sensing, acquisition, storage, processing, and control of physical behavior. However, costly peripherals are no longer necessary to obtain precise measurements and achieve stable feedback control of test-beds. With smartphones performing diverse sensing and processing tasks, this study examines the feasibility of mounting smartphones directly to test-beds to exploit their embedded hardware and software in the measurement and control of the test-beds. This approach is a first step towards replacing laboratory-grade peripherals with more compact and affordable smartphone-based platforms, whose interactive user interfaces can engender wider participation and engagement from learners. Demonstrative cases are presented in which the sensing, computation, control, and user interaction with three motor-based test-beds are handled by a mounted smartphone. Results of experiments and simulations are used to validate the feasibility of mounted smartphones as measurement and feedback control platforms for motor-based laboratory test-beds, report the measurement precision and closed-loop performance achieved with such platforms, and address challenges in the development of platforms to maintain system stability. PMID:27556464

Biological control program is being developed for brown marmorated stink bug

OpenAIRE

Lara, Jesus; Pickett, Charlie; Ingels, Chuck; Haviland, David R; Grafton-Cardwell, Elizabeth E; Doll, David A; Bethke, James A; Faber, Ben; Dara, Surendra K; Hoddle, Mark

2016-01-01

Brown marmorated stink bug (BMSB) is an invasive, polyphagous pest that has been detected in 42 U.S. states. In 2010, it caused millions of dollars in crop damages to apple growers on the East Coast, where it arrived from Asia during the 1990s. In 2002, BMSB was reported in California; since then, it has been detected in 28 counties and is established in at least nine counties. Although this pest has not yet been found on commercial crops in the state, detections of BMSB in commercial orchard...

Aggregation and Association of NDVI, Boll Injury, and Stink Bugs in North Carolina Cotton.

Science.gov (United States)

Reisig, Dominic D; Reay-Jones, F P F; Meijer, A D

2015-01-01

Sampling of herbivorous stink bugs in southeastern U.S. cotton remains problematic. Remote sensing was explored to improve sampling of these pests and associated boll injury. Two adjacent 14.5-ha cotton fields were grid sampled in 2011 and 2012 by collecting stink bug adults and bolls every week during the third, fourth, and fifth weeks of bloom. Satellite remote sensing data were collected during the third week of bloom during both years, and normalized difference vegetation index (NDVI) values were calculated. Stink bugs were spatially aggregated on the third week of bloom in 2011. Boll injury from stink bugs was spatially aggregated during the fourth week of bloom in 2012. The NDVI values were aggregated during both years. There was a positive association and correlation between stink bug numbers and NDVI values, as well as injured bolls and NDVI values, during the third week of bloom in 2011. During the third week of bloom in 2012, NDVI values were negatively correlated with stink bug numbers. During the fourth week of bloom in 2011, stink bug numbers and boll injury were both positively associated and correlated with NDVI values. During the fourth week of bloom in 2012, stink bugs were negatively correlated with NDVI values, and boll injury was negatively associated and correlated with NDVI values. This study suggests the potential of remote sensing as a tool to assist with sampling stink bugs in cotton, although more research is needed using NDVI and other plant measurements to predict stink bug injury. © The Author 2015. Published by Oxford University Press on behalf of the Entomological Society of America.

Real time test bed development for power system operation, control and cyber security

Science.gov (United States)

Reddi, Ram Mohan

The operation and control of the power system in an efficient way is important in order to keep the system secure, reliable and economical. With advancements in smart grid, several new algorithms have been developed for improved operation and control. These algorithms need to be extensively tested and validated in real time before applying to the real electric power grid. This work focuses on the development of a real time test bed for testing and validating power system control algorithms, hardware devices and cyber security vulnerability. The test bed developed utilizes several hardware components including relays, phasor measurement units, phasor data concentrator, programmable logic controllers and several software tools. Current work also integrates historian for power system monitoring and data archiving. Finally, two different power system test cases are simulated to demonstrate the applications of developed test bed. The developed test bed can also be used for power system education.

Traveler's Health: Avoid Bug Bites

Science.gov (United States)

... Safety Road Safety - 8 Steps MERS Health Advisory poster MERS Pictogram CDC Guide for Healthy Travel Website ... other accommodations that are air conditioned or have good window and door screens so bugs can’t ...

Biological control program is being developed for brown marmorated stink bug

Directory of Open Access Journals (Sweden)

Jesus Lara

2016-01-01

Full Text Available Brown marmorated stink bug (BMSB is an invasive, polyphagous pest that has been detected in 42 U.S. states. In 2010, it caused millions of dollars in crop damages to apple growers on the East Coast, where it arrived from Asia during the 1990s. In 2002, BMSB was reported in California; since then, it has been detected in 28 counties and is established in at least nine counties. Although this pest has not yet been found on commercial crops in the state, detections of BMSB in commercial orchards have been documented in Oregon and Washington. Proactive research in California has joined national efforts led by U.S. Department of Agriculture researchers to develop a classical biological control program for BMSB. A study is under way to determine potential non-target effects of a specialist egg parasitoid, Trissolcus japonicus (Hymenoptera: Platygastridae, imported from Beijing, China, part of the home range of BMSB. In addition, the role of BMSB natural enemies residing in California is being assessed. A review of the recent research outlines the possible opportunities for reducing the threat BMSB poses to California.

An automated approach for finding variable-constant pairing bugs

DEFF Research Database (Denmark)

Lawall, Julia; Lo, David

2010-01-01

program-analysis and data-mining based approach to identify the uses of named constants and to identify anomalies in these uses.  We have applied our approach to a recent version of the Linux kernel and have found a number of bugs affecting both correctness and software maintenance.  Many of these bugs...... have been validated by the Linux developers....

Improvement on the accuracy of beam bugs in linear induction accelerator

International Nuclear Information System (INIS)

Xie Yutong; Dai Zhiyong; Han Qing

2002-01-01

In linear induction accelerator the resistive wall monitors known as 'beam bugs' have been used as essential diagnostics of beam current and location. The author presents a new method that can improve the accuracy of these beam bugs used for beam position measurements. With a fine beam simulation set, this method locates the beam position with an accuracy of 0.02 mm and thus can scale the beam bugs very well. Experiment results prove that the precision of beam position measurements can reach submillimeter degree

Control of a nursing bed based on a hybrid brain-computer interface.

Science.gov (United States)

Nengneng Peng; Rui Zhang; Haihua Zeng; Fei Wang; Kai Li; Yuanqing Li; Xiaobin Zhuang

2016-08-01

In this paper, we propose an intelligent nursing bed system which is controlled by a hybrid brain-computer interface (BCI) involving steady-state visual evoked potential (SSVEP) and P300. Specifically, the hybrid BCI includes an asynchronous brain switch based on SSVEP and P300, and a P300-based BCI. The brain switch is used to turn on/off the control system of the electric nursing bed through idle/control state detection, whereas the P300-based BCI is for operating the nursing bed. At the beginning, the user may focus on one group of flashing buttons in the graphic user interface (GUI) of the brain switch, which can simultaneously evoke SSVEP and P300, to switch on the control system. Here, the combination of SSVEP and P300 is used for improving the performance of the brain switch. Next, the user can control the nursing bed using the P300-based BCI. The GUI of the P300-based BCI includes 10 flashing buttons, which correspond to 10 functional operations, namely, left-side up, left-side down, back up, back down, bedpan open, bedpan close, legs up, legs down, right-side up, and right-side down. For instance, he/she can focus on the flashing button "back up" in the GUI of the P300-based BCI to activate the corresponding control such that the nursing bed is adjusted up. Eight healthy subjects participated in our experiment, and obtained an average accuracy of 93.75% and an average false positive rate (FPR) of 0.15 event/min. The effectiveness of our system was thus demonstrated.

Synthèse bibliographique sur le comportement de recherche de l'hôte chez la punaise de lit (Cimex lectularius) et applications dans le cadre de la lutte intégrée

OpenAIRE

Legrand, P.; Verheggen, F.; Haubruge, E.; Francis, F.

2016-01-01

Host-seeking behavior in the bed bug (Cimex lectularius) and applications in integrated pest management. A review. Description of the subject. This study analyzes host-seeking behavior in the common bed bug, Cimex lectularius, paying particular attention to human stimuli involved in this orientation process. The potential applications in integrated pest management are discussed. Literature. The common bed bug is an obligate hematophagous that has been associated with humans for millennia. Whe...

Production of wood vinegars from coconut shells and additional materials for control of termite workers, Odontotermes sp. and striped mealy bugs, Ferrisia virgata

Directory of Open Access Journals (Sweden)

Sunan Wititsiri

2011-06-01

Full Text Available Coconut shells and coir are considered as wastes of coconut based products that have not been utilized efficiently.By using these abundant bioresources, which are widely available in Thailand, as raw materials, we were able to producewood vinegars that may be alternatives to termiticides and pesticides. The wood vinegars were obtained from carbonizationprocess using a 200-liter fuel tank as charcoal brazier under temperatures of 300-400°C. In this study, termiticidal and pesticidalactivities of wood vinegars were evaluated against termite workers, Odontotermes sp., and striped mealy bugs, Ferrisiavirgata, using direct contact application. Percent mortalities in the experiments were recorded after 24 hours and correctedfor control mortality with Abbott’s formula. Wood vinegars of 850, 696, and 898 milliliters were produced from coconut shell(wood vinegar A and the mixture of coconut shell and coir (wood vinegar B and the mixture of coconut shell, coir and holybasil (wood vinegar C, respectively. Wood vinegar A exhibited high termiticidal activity against termite workers at a dilutionof 1:50, wood vinegar: sterile water (v/v. By this way, 85% (81.71% corrected mortality of termite workers were killed afterthe 24 hours of test. At a dilution of 1:10, both wood vinegar A and B had exhibited high pesticidal activities against mealybugs, 96% (95.12% corrected mortality of striped mealy bugs were killed by those wood vinegars. In the weakest termiticidaland pesticidal activities, wood vinegar C was able to kill 60% (51.22% corrected mortality of termite workers at a dilution of1:50 within 24 hours. Also it killed 93% (91.89% corrected mortality of striped mealy bugs with a dilution of 1:10 (v/v withinthe same amount of time. Post-hoc comparisons (Tukey test revealed that wood vinegar A possessed the most effectivetermiticidal activity against termite workers. However, a similarity in high pesticidal activity was found among three woodvinegars

Hybridization and adaptation to introduced balloon vines in an Australian soapberry bug.

Science.gov (United States)

Andres, J A; Thampy, P R; Mathieson, M T; Loye, J; Zalucki, M P; Dingle, H; Carroll, S P

2013-12-01

Contemporary adaptation of plant feeding insects to introduced hosts provides clear cases of ecologically based population divergence. In most cases the mechanisms permitting rapid differentiation are not well known. Here we study morphological and genetic variation associated with recent shifts by the Australian soapberry bug Leptocoris tagalicus onto two naturalized Neotropical balloon vines, Cardiospermum halicacabum and C. grandiflorum that differ in time since introduction. Our results show that these vines have much larger fruits than the native hosts (Whitewood tree -Atalaya hemiglauca- and Woolly Rambutan -Alectryon tomentosus-) and that bugs living on them have evolved significantly longer beaks and new allometries. Genetic analyses of mitochondrial haplotypes and amplified fragment length polymorphic (AFLP) markers indicate that the lineage of bugs on the annual vine C. halicacabum, the older introduction, is intermediate between the two subspecies of L. tagalicus found on native hosts. Moreover, where the annual vine and Whitewood tree co-occur, the morphology and genomic composition of the bugs are similar to those occurring in allopatry. These results show that hybridization provided the genetic elements underlying the strongly differentiated 'Halicacabum bugs'. In contrast, the bugs feeding on the recently introduced perennial balloon vine (C. grandiflorum) showed no evidence of admixture, and are genetically indistinguishable from the nearby populations on a native host. © 2013 John Wiley & Sons Ltd.

Monitoring stink bugs (Hemiptera: Pentatomidae) in mid-Atlantic apple and peach orchards.

Science.gov (United States)

Leskey, T C; Hogmire, H W

2005-02-01

Pyramid traps coated with "industrial safety yellow" exterior latex gloss enamel paint and baited with Euschistus spp. aggregation pheromone, methyl (2E,4Z)-decadienoate captured more stink bugs than all other baited and unbaited trap types in both apple and peach orchards in 2002 and 2003. Commercial sources of dispensers of methyl (2E,4Z)-decadienoate deployed in association with pyramid traps had a significant impact on trap captures. Captures in pyramid traps were four-fold greater when baited with lures from IPM Technologies, Inc. (Portland, OR) than with lures from Suterra (Bend, OR). Variation in yellow pyramid trap color ("industrial safety yellow" and "standard coroplast yellow") and material (plywood, plastic, and masonite) did not affect trap captures. Brown stink bug was the predominant species captured (58%), followed by dusky stink bug, Euschistus tristigmus (Say) (20%); green stink bug, Acrosternum hilare (Say) (14%); and other stink bugs (Brochymena spp. and unidentified nymphs) (8%). Captures in baited pyramid traps were significantly correlated with tree beating samples in both managed and unmanaged apple orchards and with sweep netting samples in the unmanaged apple orchard. However, problems associated with trapping mechanisms of pyramid trap jar tops and jar traps likely resulted in reduced captures in baited traps. Improved trapping mechanisms must be established to develop an effective monitoring tool for stink bugs in mid-Atlantic orchards.

Side effects of kaolin particle films on apple orchard bug, beetle and spider communities

NARCIS (Netherlands)

Marko, V.; Bogya, S.; Kondorosy, E.; Blommers, L.H.M.

2010-01-01

The effects of multiple applications of hydrophobic kaolin particle film on apple orchard bug (Heteroptera), beetle (Coleoptera) and spider (Araneae) assemblages were studied in the Netherlands. Insecticide-free orchard plots served as a control. The kaolin applications significantly reduced the

Realization of a gamma emission tomography by a servo-controlled camera and bed

International Nuclear Information System (INIS)

Parmentier, M.; Gunzman, D.; Bidet, R.

1979-01-01

A gamma-camera and a whole-body bed were connected to a minicomputer which controlled automatically their movements. By combining horizontal displacement of the bed with vertical displacement and rotation of the camera we were able to obtain the equivalent of camera rotation around the bed. This method provides an inexpensive way of realizing gamma emission tomography [fr

Bug tracking and project management system application in an electronic design company

Directory of Open Access Journals (Sweden)

Sadık ARSLAN

2016-05-01

Full Text Available In this study, commercially available Bug Tracking and Management Information Systems has been investigated in a comprehensive manner. The systems that commonly used described in detail. Bug Tracking and Project Management Systems requirements analysis of medium-sized companies and Kentkart Ege Electronic which is an Information Technology company has been made. Obtained by the analysis requirements, the appropriate tools are selected for system application. JIRA that a product of Atlassian company was determined as a Bug Tracking and Project Management application tool. In this study, JIRA system adapted to the requirements, Bug Tracking and Project Management systems is designed in a structure which can be easily used by R&D employees. Cost-Benefit analysis is done and using this project was determined to be quite useful.

Diversity of some endophytic fungi associated with rice black bug Paraeucosmetus pallicornis on rice plant

OpenAIRE

Nur, Amin; La Daha; Nurariaty, Agus; Ade, Rosmana; Muh., Fadlan

2015-01-01

A new rice insect pest was sighted in some rice producing areas of South Sulawesi Province, Indonesia. This pest is rice black bugs Paraeucosmetus pallicornis. The research aimed to isolation of fungi associated with rice black bugs Paraeucosmetus pallicornis, so as to know the cause of a bitter taste to the rice. The isolation of the fungi consist of three kinds of treatment, namely rice black bugs without sterilization, with sterilization and rice black bugs cut and sterilized. The resul...

Extensive fragmentation of the X chromosome in the bed bug Cimex lectularius Linnaeus, 1758 (Heteroptera, Cimicidae: a survey across Europe

Directory of Open Access Journals (Sweden)

David Sadílek

2013-10-01

Full Text Available Variation in the number of chromosomes was revealed in 61 samples of Cimex lectularius Linnaeus, 1758 from the Czech Republic and other European countries, hosted on Myotis Kaup, 1829 (4 and Homo sapiens Linnaeus, 1758 (57. The karyotype of all the specimens of C. lectularius analysed contained 26 autosomes and a varying number of the sex chromosomes. The number of sex chromosomes showed extensive variation, and up to 20 fragments were recorded. Altogether, 12 distinct karyotypes were distinguished. The male karyotypes consisted of 29, 30, 31, 32, 33, 34, 35, 36, 37, 40, 42 and 47 chromosomes. The females usually exhibited the number of chromosomes which was complementary to the number established in the males from the same sample. However, 11 polymorphic samples were revealed in which the karyotypes of females and males were not complementary each other. The complement with 2n = 26+X1X2Y was found in 44% of the specimens and 57,4% samples of bed bugs studied. The karyotypes with higher chromosome numbers as well as individuals with chromosomal mosaics were usually found within the samples exhibiting particularly extensive variation between individuals, and such complements were not found within samples contaning a few or single specimen. The occurrence of chromosomal mosaics with the karyotype constitution varying between cells of single individual was observed in five specimens (4.3% from five samples. We assume that polymorphism caused by fragmentation of the X chromosome may result in meiotic problems and non-disjunction can produce unbalanced gametes and result in lowered fitness of individuals carrying higher numbers of the X chromosome fragments. This effect should be apparently enhanced with the increasing number of the fragments and this may be the reason for the observed distribution pattern of individual karyotypes in the studied samples and the rarity of individuals with extremely high chromosome numbers. The assumed lowering of the

Stability of Spatial Distributions of Stink Bugs, Boll Injury, and NDVI in Cotton.

Science.gov (United States)

Reay-Jones, Francis P F; Greene, Jeremy K; Bauer, Philip J

2016-10-01

A 3-yr study was conducted to determine the degree of aggregation of stink bugs and boll injury in cotton, Gossypium hirsutum L., and their spatial association with a multispectral vegetation index (normalized difference vegetation index [NDVI]). Using the spatial analysis by distance indices analyses, stink bugs were less frequently aggregated (17% for adults and 4% for nymphs) than boll injury (36%). NDVI values were also significantly aggregated within fields in 19 of 48 analyses (40%), with the majority of significant indices occurring in July and August. Paired NDVI datasets from different sampling dates were frequently associated (86.5% for weekly intervals among datasets). Spatial distributions of both stink bugs and boll injury were less stable than for NDVI, with positive associations varying from 12.5 to 25% for adult stink bugs for weekly intervals, depending on species. Spatial distributions of boll injury from stink bug feeding were more stable than stink bugs, with 46% positive associations among paired datasets with weekly intervals. NDVI values were positively associated with boll injury from stink bug feeding in 11 out of 22 analyses, with no significant negative associations. This indicates that NDVI has potential as a component of site-specific management. Future work should continue to examine the value of remote sensing for insect management in cotton, with an aim to develop tools such as risk assessment maps that will help growers to reduce insecticide inputs. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Green plant bug from South Texas gets a common name - the "verde plant" bug

Science.gov (United States)

Some cotton producers from south Texas and the Gulf Coast regions have been unfortunate over the last few years because they have had to deal with a green plant bug, Creontiades signatus, that will feed on cotton fruit. The insect was initially, and erroneously, thought to be Creontiades dilutus, an...

Effect of bedding control on amount of house dust mite allergens, asthma symptoms, and peak expiratory flow rate.

Science.gov (United States)

Lee, Inn-Sook

2003-04-30

This quasi-experimental study was designed to investigate the effect of bedding control on the amount of house dust mite (HDM) allergens, asthma symptoms, and peak expiratory flow rate (PEFR) in asthmatics sensitive to HDMs. The subjects in the study were drawn from patients receiving treatment at the allergy clinics of three university-affiliated hospitals in Seoul. Forty-two patients without prior practice of the bedding control used in this study were selected. They commonly showed bronchial asthma caused by HDMs, and exhibited strong positive points (more than 3 points) in skin prick test (D. farinae, D. pteronyssinus), and positive response in both fluoro-allergosorbent test (FAST), and PC20 methacholine test. Of the subjects, alternatively, 22 were assigned to the experimental group and 20 to control group. Bedding control consisted of the use of outer cotton covers, boiling them for 10 minutes fortnightly, and disinfecting bedding by sunlight fortnightly. The experimental group was under bedding control for 4 weeks. The data were collected from October 2000 to January 2001. The results were as follows: 1. After bedding control, the total amount of HDM allergens decreased significantly in the experimental group. However there was no significant difference in the decrease of the amount of HDM allergens between the two groups. 2. Of the asthma symptoms, there was significant difference only in the decrease of the frequency of dyspnea, and in the increase of sleeping disturbance between the two groups after bedding control. 3. After bedding control, PEFR increased in the experimental group whereas it decreased in the control group. However, neither change was significant. The above findings indicate that bedding control improved several asthma symptoms in asthmatics sensitive to HDMs. Accordingly, we suggest that bedding control is adopted as a useful nursing intervention in the field.

A scaled experimental study of control blade insertion dynamics in Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactors

Energy Technology Data Exchange (ETDEWEB)

Buster, Grant C., E-mail: grant.buster@gmail.com; Laufer, Michael R.; Peterson, Per F.

2016-07-15

Highlights: • A granular dynamics scaling methodology is discussed. • Control blade insertion in a representative pebble-bed core is experimentally studied. • Control blade insertion forces and pebble displacements are experimentally measured. • X-ray tomography techniques are used to observe pebble displacement distributions. - Abstract: Direct control element insertion into a pebble-bed reactor core is proposed as a viable control system in molten-salt-cooled pebble-bed reactors. Unlike helium-cooled pebble-bed reactors, this reactor type uses spherical fuel elements with near-neutral buoyancy in the molten-salt coolant, thus reducing contact forces on the fuel elements. This study uses the X-ray Pebble Bed Recirculation Experiment facility to measure the force required to insert a control element directly into a scaled pebble-bed. The required control element insertion force, and therefore the contact force on fuel elements, is measured to be well below recommended limits. Additionally, X-ray tomography is used to observe how the direct insertion of a control element physically displaces spherical fuel elements. The tomography results further support the viability of direct control element insertion into molten-salt-cooled pebble-bed reactor cores.

Bug22 influences cilium morphology and the post-translational modification of ciliary microtubules

Directory of Open Access Journals (Sweden)

Teresa Mendes Maia

2014-01-01

Cilia and flagella are organelles essential for motility and sensing of environmental stimuli. Depending on the cell type, cilia acquire a defined set of functions and, accordingly, are built with an appropriate length and molecular composition. Several ciliary proteins display a high degree of conservation throughout evolution and mutations in ciliary genes are associated with various diseases such as ciliopathies and infertility. Here, we describe the role of the highly conserved ciliary protein, Bug22, in Drosophila. Previous studies in unicellular organisms have shown that Bug22 is required for proper cilia function, but its exact role in ciliogenesis has not been investigated yet. Null Bug22 mutant flies display cilia-associated phenotypes and nervous system defects. Furthermore, sperm differentiation is blocked at the individualization stage, due to impaired migration of the individualization machinery. Tubulin post-translational modifications (PTMs such as polyglycylation, polyglutamylation or acetylation, are determinants of microtubule (MT functions and stability in centrioles, cilia and neurons. We found defects in the timely incorporation of polyglycylation in sperm axonemal MTs of Bug22 mutants. In addition, we found that depletion of human Bug22 in RPE1 cells resulted in the appearance of longer cilia and reduced axonemal polyglutamylation. Our work identifies Bug22 as a protein that plays a conserved role in the regulation of PTMs of the ciliary axoneme.

Differences in morphometrics and reproductive physiology between two populations of Trissolcus japonicus, a promising biological control agent candidate for brown marmorated stink bug (Halyomorpha halys Stal) in the US

Science.gov (United States)

Trissolcus japonicus (Ashmead), a solitary egg parasitoid of Pentatomidae native to Southeast Asia, has been undergoing host-range testing in U.S. quarantine facilities since 2009 as a candidate for the biological control of brown marmorated stink bug (Halyomorpha halys Stål)(BMSB), an invasive agri...

Bug Distribution and Statistical Pattern Classification.

Science.gov (United States)

Tatsuoka, Kikumi K.; Tatsuoka, Maurice M.

1987-01-01

The rule space model permits measurement of cognitive skill acquisition and error diagnosis. Further discussion introduces Bayesian hypothesis testing and bug distribution. An illustration involves an artificial intelligence approach to testing fractions and arithmetic. (Author/GDC)

Control, data acquisition and analysis for the JET neutral injection test bed

International Nuclear Information System (INIS)

Jones, T.T.C.; Brenan, P.R.; Rodgers, M.E.; Stork, D.; Young, I.D.

1984-01-01

The Neutral Injection Test-Bed (NITB) is a major experimental assembly in support of the Neutral Beam Heating Programme for JET. In addition to its prime function of testing the Neutral Injection hardware, the Test Bed serves as the prototype to test the computer control and data acquisition system, which is described. (author)

Verde plant bug (Hemiptera: Miridae) feeding injury to cotton bolls characterized by boll age, size, and damage ratings.

Science.gov (United States)

Armstrong, J Scott; Brewer, Michael J; Parker, Roy D; Adamczyk, J J

2013-02-01

The verde plant bug, Creontiades signatus (Distant), has been present in south Texas for several years but has more recently been documented as an economic threat to cultivated cotton, (Gossypium hirsutum L. Our studies over 2 yr (2009 and 2010) and two locations (Weslaco and Corpus Christi, TX) investigated feeding-injury of the verde plant bug to a range of cotton boll age classes defined by boll diameter and accumulated degree-days (anthesis to the time of infesting) for first-position cotton bolls infested with the plant bugs. The most detrimental damage to younger cotton holls from verde plant bug feeding was boll abscission. Cotton bolls verde plant bug injured bolls compared with the controls up to 162 ACDD or a mean boll diameter 2.0 cm. Cotton seed weights were significantly reduced up to 179 ACDD or a boll diameter of 2.0 cm at Weslaco in 2009, and up to 317 ACDD or boll diameter 2.6 cm for Weslaco in 2010 when compared with the noninfested controls. Lint weight per cotton boll for infested and noninfested bolls was significantly reduced up to 262 ACDD or boll diameter 2.5 for Corpus Christi in 2010 and up to 288 ACCD or boll diameter 2.6 cm for Weslaco, TX, in 2010. Damage ratings (dependant variable) regressed against infested and noninfested seed-cotton weights showed that in every instance, the infested cotton bolls had a strong and significant relationship with damage ratings for all age classes of bolls. Damage ratings for the infested cotton bolls that did not abscise by harvest showed visual signs of verde plant bug feeding injury and the subsequent development ofboll rot; however, these two forms of injury causing lint and seed mass loss are hard to differentiate from open or boll-locked cotton bolls. Based on the results of both lint and seed loss over 2 yr and four studies cotton bolls should be protected up to approximately 300 ACDD or a boll diameter of 2.5 cm. This equilibrates to bolls that are 12-14 d of age dependent upon daily maximum

Comparing Fine-Grained Source Code Changes And Code Churn For Bug Prediction

NARCIS (Netherlands)

Giger, E.; Pinzger, M.; Gall, H.C.

2011-01-01

A significant amount of research effort has been dedicated to learning prediction models that allow project managers to efficiently allocate resources to those parts of a software system that most likely are bug-prone and therefore critical. Prominent measures for building bug prediction models are

Usage of data warehouse for analysing software's bugs

Science.gov (United States)

Živanov, Danijel; Krstićev, Danijela Boberić; Mirković, Duško

2017-07-01

We analysed the database schema of Bugzilla system and taking into account user's requirements for reporting, we presented a dimensional model for the data warehouse which will be used for reporting software defects. The idea proposed in this paper is not to throw away Bugzilla system because it certainly has many strengths, but to make integration of Bugzilla and the proposed data warehouse. Bugzilla would continue to be used for recording bugs that occur during the development and maintenance of software while the data warehouse would be used for storing data on bugs in an appropriate form, which is more suitable for analysis.

Insecticide susceptibility of Nezara viridula (Heteroptera: Pentatomidae) and three other stink bug species composing a soybean pest complex in Japan.

Science.gov (United States)

Takeuchi, Hiroaki; Endo, Nobuyuki

2012-06-01

The susceptibility of the stink bug species Nezara viridula (L.), Nezara antennata Scott, Piezodorus hybneri (Gmelin), and Riptortus pedestris (F.) to insecticides was tested, establishing their 50% lethal dose (LD50) values as baseline data. Third instars and adults of the four species were treated by topical application with seven insecticides: fenitrothion, fenthion, etofenprox, silafluofen, dinotefuran, clothianidin, and ethiprole. The weight of the stink bug and weight of the insecticide applied to each bug were used as explanatory variables in the probit regression analysis. The effect of the body weight on the dose-response relationship, the proportional model, was not uniform among the tested insecticide-stink bug combinations. However, the basic model fit all combinations and could estimate LD50 values successfully. Therefore, LD50 values at the medium (average) weight estimated by the basic model were selected to describe the susceptibility of the stink bugs. The LD50 value of silafluofen for N. viridula adults, and that of silafluofen and etofenprox for N. antennata adults, was at least 2,338 ng greater than the other species exposed to each insecticide. Almost all of the LD50 values for adults were over 10 times greater than those of the same species' nymphs treated with the same insecticide. Thus monitoring of occurring species and their developmental stages is important for controlling effectively the stink bug pest complex by insecticides, especially by silafluofen or etofenprox. The estimated LD50 values can be used as baseline data to compare the susceptibility of the species collected in another year or location.

Mass transfer controlled reactions in packed beds at low Reynolds numbers

Energy Technology Data Exchange (ETDEWEB)

Fedkiw, P.S.

1978-12-01

The a priori prediction and correlation of mass-transfer rates in transport limited, packed-bed reactors at low Reynolds numbers is examined. The solutions to the governing equations for a flow-through porous electrode reactor indicate that these devices must operate at a low space velocity to suppress a large ohmic potential drop. Packed-bed data for the mass-transfer rate at such low Reynolds numbers were examined and found to be sparse, especially in liquid systems. Prior models to simulate the solid-void structure in a bed are reviewed. Here the bed was envisioned as an array of sinusoidal periodically constricted tubes (PCT). Use of this model has not appeared in the literature. The velocity field in such a tube should be a good approximation to the converging-diverging character of the velocity field in an actual bed. The creeping flow velocity profiles were calculated. These results were used in the convective-diffusion equation to find mass transfer rates at high Peclet number for both deep and shallow beds, for low Peclet numbers in a deep bed. All calculations assumed that the reactant concentration at the tube surface is zero. Mass-transfer data were experimentally taken in a transport controlled, flow-through porous electrode to test the theoretical calculations and to provide data resently unavailable for deeper beds. It was found that the sinusoidal PCT model could not fit the data of this work or that available in the literature. However, all data could be adequately described by a model which incorporates a channelingeffect. The bed was successfully modeled as an array of dual sized straight tubes.

Test bed control center design concept for Tank Waste Retrieval Manipulator Systems

International Nuclear Information System (INIS)

Sundstrom, E.; Draper, J.V.; Fausz, A.

1995-01-01

This paper describes the design concept for the control center for the Single Shell Tank Waste Retrieval Manipulator System test bed and the design process behind the concept. The design concept supports all phases of the test bed mission, including technology demonstration, comprehensive system testing, and comparative evaluation for further development and refinement of the TWRMS for field operations

Genetic Diversity and Phylogenetic Relationships of Cytochrome C Oxidase Subunit I in Cimex hemipterus (Hemiptera: Cimicidae) Populations in Malaysia.

Science.gov (United States)

Seri Masran, Siti Nor Ain; Ab Majid, Abdul Hafiz

2017-07-01

The tropical bed bug is scientifically recognized as a significant public health problem. While there is an increased awareness about their resurgence by medical and life science committees, efficient bed bug management still remains unresolved. The solution may soon arise, as information about bed bugs' infestation dynamics and systematics are becoming more distinguishable. Recent developments in studies about bed bugs are based on molecular intervention by determining their genetic variation and phylogeography. The aim of this study is to assess the phylogenetic relationships and genetic diversity among the populations of tropical bed bugs inhabiting Malaysia. A molecular genotyping study was conducted with 22 tropical bed bug populations composed of three individuals per population. The mitochondrial (COI) gene was used as a marker. The data obtained were analyzed using the T-Coffee, ClustalX, MEGA 6.0, and PAUP software. The results showed one main monophyletic clade that consisted of two groups: Ch01 and Ch02. Ch02 consists of samples from the Bandar Hilir population, differing from the other populations studied by one singleton base. However, as there were no changes in the amino acid, this singleton genetic variation was considered to have no effect on genetic differentiation. Ch01 shows similarity with some sequence of Cimex hemipterus (F.) from Thailand, suggesting an international diversity connection. The disparity index apparently suggests that all isolates are homogeneous populations and are supported by the low value of the mean pairwise distance between isolates. This study will increase the knowledge about phylogeographic diversity of tropical bed bug in Malaysia. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Dissolved oxygen control in a coupled fluidized bed system

International Nuclear Information System (INIS)

Jones, R.M.; Melcer, H.

1988-01-01

The biological fluidized bed process is a modification of more conventional fixed film processes, such as the trickling filter, in which wastewater is passed upward through a bed of granular support medium, typically sand, at a sufficient velocity to expand or fluidize the medium. The granular medium provides a large surface area for the establishment of a biological film. The fluidized bed process was selected to investigate the treatment of coking plant wastewaters in view of the significant advantages offered in terms of reduced reactor volumes that result from the high biomass concentration maintained on the support medium. The technical feasibility of treating coal distillation condensates was evaluated during a 3-year study at Environment Canada's Wastewater Technology Centre (WTC). The feed to the pilot scale test system consisted of effluent from fixed and free leg ammonia stills at the by-product coke plant of Dofasco Inc. in Hamilton, Ontario. The pilot plant consisted of two fluidized bed reactors in series, coupled to provide carbon oxidation, nitrification and denitrification in the predenitrification operating mode. The anoxic denitrification reactor was 115 mm in diameter and the oxygenic nitrification reactor, 290 mm in diameter. The bed heights and reactor volumes were adjustable by relocation of the position of the sand/biomass wasting valve. The experimental objective of this research was to determine those operating conditions required to maintain stable nitrification and complete denitrification under both steady state and dynamic operating conditions. Details regarding operating, sampling and analytic procedures have been presented elsewhere. A specific operating problem existed relating to the control of the dissolved oxygen concentration in the oxygenic fluidized bed reactor, the solution of which forms the basis of the paper

Nonlinear dynamics and control of a recycle fixed bed reactor

DEFF Research Database (Denmark)

Recke, Bodil; Jørgensen, Sten Bay

1997-01-01

The purpose of this paper is twofold. Primarily to describe the dynamic behaviour that can be observed in a fixed bed reactor with recycle of unconverted reactant. Secondly to describe the possibilities of model reduction in order to facilitate control design. Reactant recycle has been shown...... to introduce periodic solution to the fixed bed reactor, a phenomenon which is not seen for the system without the recycle, at least not within the Peclet number range investigated in the present work. The possibility of model reduction by the methods of modal decomposition, and by characteristics...

Integrating Symbolic Execution with Sensornet Simulation for Efficient Bug Finding

OpenAIRE

Österlind, Fredrik; Sasnauskas, Raimondas; Dustmann, Oscar Soria; Dunkels, Adam; Wehrle, Klaus

2010-01-01

High-coverage testing of sensornet applications is vital for pre-deployment bug cleansing, but has previously been difficult due to the limited set of available tools. We integrate the KleeNet symbolic execution engine with the COOJA network simulator to allow for straight-forward and intuitive high-coverage testing initiated from a simulation environment. A tight coupling of simulation and testing helps detect, narrow down, and fix complex interaction bugs in an early ...

Comparative Performance Analysis of Machine Learning Techniques for Software Bug Detection

OpenAIRE

Saiqa Aleem; Luiz Fernando Capretz; Faheem Ahmed

2015-01-01

Machine learning techniques can be used to analyse data from different perspectives and enable developers to retrieve useful information. Machine learning techniques are proven to be useful in terms of software bug prediction. In this paper, a comparative performance analysis of different machine learning techniques is explored f or software bug prediction on public available data sets. Results showed most of the mac ...

Area-wide management approach for tarnished plant bug in the Mississippi Delta

Science.gov (United States)

The tarnished plant bug, Lygus lineolaris (Palisot de Beauvois), is the major insect pest of cotton, Gossypium hirsutum (L.), within the Mid-South region. From 2001 to 2012, the tarnished plant bug has been the number one insect pest of cotton in Louisiana and Mississippi in eleven and nine of those...

ASSESSMENT OF HEAVY METALS CONTENTS IN BOTTOM SEDIMENTS OF BUG RIVER

Directory of Open Access Journals (Sweden)

Elżbieta Skorbiłowicz

2014-07-01

Full Text Available The development of industry, agriculture, and transport contributes to an increased environmental pollution by heavy metals. The aim of the study was preliminary assessment of the contents of selected metals (lead, cobalt, copper, chromium, cadmium and nickel in the sediments of Bug river. The study comprised part of the river flowing through Poland. It was found that the Bug river sediments are not contaminated in respect to the content of tested metals. Based on the analysis of the study results, these metals can be lined up in the following order: Cr > Pb > Cu > Ni > Co > Cd. Statistical analysis showed that copper and chromium occur in Bug river sediments in forms bindings with organic matter in majority of cases. The granulometric analysis of sediments from Bug river revealed the largest percentage of two fractions: 1.0–0.2 mm with average of 47.7 ± 19.77% and 0.2–0.1 mm with average of 20.6 ± 7.7%. These are the dominant fractions with the accumulation of metals in river sediments, which has been confirmed by statistical analysis.

Cytogenetika štěnic (Cimicidae) jako modelových ploštic (Insecta: Heteroptera)

OpenAIRE

Sadílek, David

2010-01-01

Cytogenetics of bed bugs (Cimicidae) as a model true bugs (Insecta: Heteroptera) The thesis provides current opinions about a phylogeny of bed bugs, family Cimicidae, and their classification within the order Heteroptera. There are briefly summarized cytological data about the order Heteroptera, known karyotypes of the cimicid subfamilies and introduction to cytogenetics of species Cimex lectularius Linnaeus, 1758. Heteroptera species differ from other organisms by holokinetic chromosomes, a ...

The nuclear dimension of the millennium bug: The Syrian experience

International Nuclear Information System (INIS)

Khudeir, I.

1999-01-01

Two nuclear facilities operated by the AECS have been investigated for the Y2K compliance. Computers and associated electronic systems in the Miniature Neutron Source Reactor and the Co-60 irradiator facility were examined. Real time clocks (BIOS) of the personal computers failed Y2K bug and needed to be manually rolled over January 1st 2000. Leap year checks, however were successful. Application software used by the operators for controlling facilities and performing measurements were able to function normally

Adaptive control of paste drying in spouted bed using the GPC algorithm

Directory of Open Access Journals (Sweden)

Corrêa N.A.

2000-01-01

Full Text Available Spouted bed is an equipment reasonable investigated for drying of many and different materials ranging from granules to pastes and suspensions. This work presents an implementation and tests of an advanced control strategy (GPC on a spouted bed dryer. Water was used as the ideal paste for tests. A microcomputer PC-486 type was used to maintain humidity and temperature set points of air in the dryer by manipulating electric power of heat exchanger and paste feed flow rate. An instrumentation was set-up with different sensors, interface and final control elements for the process. The tests were carried out with pure water as ideal paste. Stability and performance analysis of the control strategy were accomplished. A stable controller was obtained which encouraged us to investigate this control strategy in the drying of other pastes too.

Degree Day Requirements for Kudzu Bug (Hemiptera: Plataspidae), a Pest of Soybeans.

Science.gov (United States)

Grant, Jessica I; Lamp, William O

2018-04-02

Understanding the phenology of a new potential pest is fundamental for the development of a management program. Megacopta cribraria Fabricius (Hemiptera: Plataspidae), kudzu bug, is a pest of soybeans first detected in the United States in 2009 and in Maryland in 2013. We observed the phenology of kudzu bug life stages in Maryland, created a Celsius degree-day (CDD) model for development, and characterized the difference between microhabitat and ambient temperatures of both kudzu, Pueraria montana (Lour.) Merr. (Fabales: Fabaceae) and soybeans, Glycine max (L.) Merrill (Fabales: Fabaceae). In 2014, low population numbers yielded limited resolution from field phenology observations. We observed kudzu bug populations persisting within Maryland; but between 2013 and 2016, populations were low compared to populations in the southeastern United States. Based on the degree-day model, kudzu bug eggs require 80 CDD at a minimum temperature of 14°C to hatch. Nymphs require 545 CDD with a minimum temperature of 16°C for development. The CDD model matches field observations when factoring a biofix date of April 1 and a minimum preoviposition period of 17 d. The model suggests two full generations per year in Maryland. Standard air temperature monitors do not affect model predictions for pest management, as microhabitat temperature differences did not show a clear trend between kudzu and soybeans. Ultimately, producers can predict the timing of kudzu bug life stages with the CDD model for the use of timing management plans in soybean fields.

Bringing Up Girls in Science (BUGS): The Effectiveness of an Afterschool Environmental Science Program for Increasing Female Students' Interest in Science Careers

Science.gov (United States)

Tyler-Wood, Tandra; Ellison, Amber; Lim, Okyoung; Periathiruvadi, Sita

2012-02-01

Bringing Up Girls in Science (BUGS) was an afterschool program for 4th and 5th grade girls that provided authentic learning experiences in environmental science as well as valuable female mentoring opportunities in an effort to increase participants' academic achievement in science. BUGS participants demonstrated significantly greater amounts of gain in science knowledge as measured by the Iowa Test of Basic Skills in Science (ITBS-S). The original BUGS participants and contrasts have now completed high school and entered college, allowing researchers to assess the long-term impact of the BUGS program. Fourteen former BUGS participants completed two instruments to assess their perceptions of science and science, technology, engineering, and mathematics (STEM) careers. Their results were compared to four contrast groups composed entirely of females: 12 former BUGS contrasts, 10 college science majors, 10 non-science majors, and 9 current STEM professionals. Results indicate that BUGS participants have higher perceptions of science careers than BUGS contrasts. There were no significant differences between BUGS participants, Science Majors, and STEM professionals in their perceptions of science and STEM careers, whereas the BUGS contrast group was significantly lower than BUGS participants, Science Majors, and STEM Professionals. Additional results and implications are discussed within.

Association of Verde plant bug, Creontiades signatus (Hemiptera: Miridae), with cotton boll rot

Science.gov (United States)

Cotton along the Gulf Coast of south Texas has experienced loss from cotton boll rot especially during the last 10 to 15 years, and stink bugs and plant bugs (Hemiptera: Pentatomidae and Miridae) that feed on cotton bolls have been suspected in introducing the disease. A replicated grower field surv...

Dicyclopentadiene Hydrogenation in Trickle Bed Reactor under Forced Periodic Control

Czech Academy of Sciences Publication Activity Database

Skála, D.; Hanika, Jiří

2008-01-01

Roč. 62, č. 2 (2008), s. 215-218 ISSN 1336-7242 R&D Projects: GA MPO(CZ) FT-TA/039 Institutional research plan: CEZ:AV0Z40720504 Keywords : periodic control * trickle -bed reactor * dicyclopentadiene Subject RIV: CI - Industrial Chemistry, Chemical Engineering

Attraction of stink bug (Hemiptera: Pentatomidae) nymphs to Euschistus aggregation pheromone in the field

Science.gov (United States)

Phytophagous stink bugs (Hemiptera: Pentatomidae) are primary pests in most fruit, vegetable, grain, and row crops worldwide. Pheromones have been identified and synthesized for several species of economically important stink bug pests. When yellow pyramid traps are baited with lures containing thes...

Adjacent habitat influence on stink bug (Hemiptera: Pentatomidae) densities and the associated damage at field corn and soybean edges.

Science.gov (United States)

Venugopal, P Dilip; Coffey, Peter L; Dively, Galen P; Lamp, William O

2014-01-01

The local dispersal of polyphagous, mobile insects within agricultural systems impacts pest management. In the mid-Atlantic region of the United States, stink bugs, especially the invasive Halyomorpha halys (Stål 1855), contribute to economic losses across a range of cropping systems. Here, we characterized the density of stink bugs along the field edges of field corn and soybean at different study sites. Specifically, we examined the influence of adjacent managed and natural habitats on the density of stink bugs in corn and soybean fields at different distances along transects from the field edge. We also quantified damage to corn grain, and to soybean pods and seeds, and measured yield in relation to the observed stink bug densities at different distances from field edge. Highest density of stink bugs was limited to the edge of both corn and soybean fields. Fields adjacent to wooded, crop and building habitats harbored higher densities of stink bugs than those adjacent to open habitats. Damage to corn kernels and to soybean pods and seeds increased with stink bug density in plots and was highest at the field edges. Stink bug density was also negatively associated with yield per plant in soybean. The spatial pattern of stink bugs in both corn and soybeans, with significant edge effects, suggests the use of pest management strategies for crop placement in the landscape, as well as spatially targeted pest suppression within fields.

Adjacent habitat influence on stink bug (Hemiptera: Pentatomidae densities and the associated damage at field corn and soybean edges.

Directory of Open Access Journals (Sweden)

P Dilip Venugopal

Full Text Available The local dispersal of polyphagous, mobile insects within agricultural systems impacts pest management. In the mid-Atlantic region of the United States, stink bugs, especially the invasive Halyomorpha halys (Stål 1855, contribute to economic losses across a range of cropping systems. Here, we characterized the density of stink bugs along the field edges of field corn and soybean at different study sites. Specifically, we examined the influence of adjacent managed and natural habitats on the density of stink bugs in corn and soybean fields at different distances along transects from the field edge. We also quantified damage to corn grain, and to soybean pods and seeds, and measured yield in relation to the observed stink bug densities at different distances from field edge. Highest density of stink bugs was limited to the edge of both corn and soybean fields. Fields adjacent to wooded, crop and building habitats harbored higher densities of stink bugs than those adjacent to open habitats. Damage to corn kernels and to soybean pods and seeds increased with stink bug density in plots and was highest at the field edges. Stink bug density was also negatively associated with yield per plant in soybean. The spatial pattern of stink bugs in both corn and soybeans, with significant edge effects, suggests the use of pest management strategies for crop placement in the landscape, as well as spatially targeted pest suppression within fields.

Bug-in-Ear eCoaching: Impacts on Novice Early Childhood Special Education Teachers

Science.gov (United States)

Grygas Coogle, Christan; Ottley, Jennifer R.; Rahn, Naomi L.; Storie, Sloan

2018-01-01

A multiple-probe, single-case design was used to determine the effects of bug-in-ear eCoaching on teachers' use of two targeted naturalistic communication strategies and focus children's responses to these strategies. Results indicated that bug-in-ear eCoaching enhanced teachers' use of communication strategies and the appropriate responses of…

Milkweed, stink bugs, and Georgia cotton

Science.gov (United States)

In peanut-cotton farmscapes in Georgia, stink bugs, i.e., Nezara viridula (L.)(Say) and Chinavia hilaris (Say), develop in peanut and then disperse at the crop-to-crop interface to feed on fruit in cotton. The main objective of this study was to examine the influence of a habitat of tropical milkwe...

Bug breakfast in the bulletin: human papilloma virus.

Science.gov (United States)

Wallace, Cate; Weisberg, Edith; McCaffery, Kirsten

2007-01-01

The Bug Breakfast topic for October was Human Papilloma Virus (HPV). The presenters covered the epidemiology of HPV, the newly introduced HPV vaccine and social and psychological issues relating to HPV vaccination.

Verde plant bug is associated with cottong boll rot in South Texas cotton

Science.gov (United States)

Verde plant bug was the dominant boll-feeding sucking bug species (>98% of insects collected using a beat bucket) from peak to late bloom in cotton fields near the coast along the Coastal Bend of South Texas, from Port Lavaca to the Lower Rio qrande Valley in 2010 and 2011. It was common in fields w...

Material control system design: Test Bed Nitrate Storage Area (TBNSA)

International Nuclear Information System (INIS)

Clark, G.A.; Da Roza, R.A.; Dunn, D.R.; Sacks, I.J.; Harrison, W.; Huebel, J.G.; Ross, W.N.; Salisbury, J.D.; Sanborn, R.H.; Weissenberger, S.

1978-05-01

This report provides an example of a hypothetical Special Nuclear Material (SNM) Safeguard Material Control and Accounting (MC and A) System which will be used as a subject for the demonstration of the Lawrence Livermore Laboratory MC and A System Evaluation Methodology in January 1978. This methodology is to become a tool in the NRC evaluation of license applicant submittals for Nuclear Fuel Cycle facilities. The starting point for this test bed design was the Allied-General Nuclear Services--Barnwell Nuclear Fuel Plant Reprocessing plant as described in the Final Safety Analysis Report (FSAR), of August 1975. The test bed design effort was limited to providing an SNM safeguard system for the plutonium nitrate storage area of this facility

Vestibular and Somatosensory Covergence in Postural Equilibrium Control: Insights from Spaceflight and Bed Rest Studies

Science.gov (United States)

Mulavara, A. P.; Batson, C. D.; Buxton, R. E.; Feiveson, A. H.; Kofman, I. S.; Lee, S. M. C.; Miller, C. A.; Peters, B. T.; Phillips, T.; Platts, S. H.;

Feather bedding and childhood asthma associated with house dust mite sensitisation : a randomised controlled trial

NARCIS (Netherlands)

Glasgow, Nicholas J.; Ponsonby, Anne-Louise; Kemp, Andrew; Tovey, Euan; van Asperen, Peter; McKay, Karen; Forbes, Samantha

Introduction Observational studies report inverse associations between the use of feather upper bedding (pillow and/or quilt) and asthma symptoms but there is no randomised controlled trial (RCT) evidence assessing the role of feather upper bedding as a secondary prevention measure. Objective To

Bayesian Analysis for Penalized Spline Regression Using WinBUGS

Directory of Open Access Journals (Sweden)

Ciprian M. Crainiceanu

2005-09-01

Full Text Available Penalized splines can be viewed as BLUPs in a mixed model framework, which allows the use of mixed model software for smoothing. Thus, software originally developed for Bayesian analysis of mixed models can be used for penalized spline regression. Bayesian inference for nonparametric models enjoys the flexibility of nonparametric models and the exact inference provided by the Bayesian inferential machinery. This paper provides a simple, yet comprehensive, set of programs for the implementation of nonparametric Bayesian analysis in WinBUGS. Good mixing properties of the MCMC chains are obtained by using low-rank thin-plate splines, while simulation times per iteration are reduced employing WinBUGS specific computational tricks.

The effects of a newsletter on bedding control on house dust mite allergen concentrations in childcare centers in Korea

Directory of Open Access Journals (Sweden)

Jeonghoon Kim

2015-08-01

Full Text Available Objectives Bedding in childcare centers (CCCs can hold house dust mite (HDM allergens. This study examined whether HDM allergen levels can be reduced through the distribution of an educational newsletter on bedding control to parents of CCC children in Korea. Methods All 38 CCCs were measured for Der 1 (sum of Der f 1 and Der p 1 concentrations on classroom floors and bedding before the intervention. Educational newsletters on children’s bedding control were sent to 21 CCCs by mail, and teachers were asked to distribute the newsletters to the parents of the children (intervention group. The remaining 17 CCCs were not sent newsletters (control group. The measurement of Der 1 concentrations in 38 CCCs was repeated after the intervention. Dust samples were collected with a vacuum cleaner and analyzed using enzyme-linked immunosorbent assay methods. Results The Der 1 concentrations on the bedding were significantly higher than those on the floors in 38 CCCs at baseline (p<0.05. Although changes of the Der 1 concentrations for the control group (n=17 were not significant, Der 1 concentrations for the intervention group (n=21 decreased significantly from 2077.9 ng/g dust to 963.5 ng/g dust on the floors and from 3683.9 ng/g dust to 610.4 ng/g dust on bedding (p<0.05. Conclusions The distribution of educational newsletters on bedding control to parents may be an effective means of controlling HDMs in CCCs.

Advanced Photovoltaic Inverter Control Development and Validation in a Controller-Hardware-in-the-Loop Test Bed

Energy Technology Data Exchange (ETDEWEB)

Prabakar, Kumaraguru [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Shirazi, Mariko [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Singh, Akanksha [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chakraborty, Sudipta [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-11-07

Penetration levels of solar photovoltaic (PV) generation on the electric grid have increased in recent years. In the past, most PV installations have not included grid-support functionalities. But today, standards such as the upcoming revisions to IEEE 1547 recommend grid support and anti-islanding functions-including volt-var, frequency-watt, volt-watt, frequency/voltage ride-through, and other inverter functions. These functions allow for the standardized interconnection of distributed energy resources into the grid. This paper develops and tests low-level inverter current control and high-level grid support functions. The controller was developed to integrate advanced inverter functions in a systematic approach, thus avoiding conflict among the different control objectives. The algorithms were then programmed on an off-the-shelf, embedded controller with a dual-core computer processing unit and field-programmable gate array (FPGA). This programmed controller was tested using a controller-hardware-in-the-loop (CHIL) test bed setup using an FPGA-based real-time simulator. The CHIL was run at a time step of 500 ns to accommodate the 20-kHz switching frequency of the developed controller. The details of the advanced control function and CHIL test bed provided here will aide future researchers when designing, implementing, and testing advanced functions of PV inverters.

Milkweed (Gentianales: Apocynaceae): a farmscape resource for increasing parasitism of stink bugs (Hemiptera: Pentatomidae) and providing nectar to insect pollinators and monarch butterflies.

Science.gov (United States)

Tillman, P G; Carpenter, J E

2014-04-01

In peanut-cotton farmscapes in Georgia, the stink bugs Nezara viridula (L.) and Chinavia hilaris (Say) (Hemiptera: Pentatomidae) and the leaffooted bug, Leptoglossus phyllopus (L.) (Hemiptera: Coreidae), disperse at crop-to-crop interfaces to feed on bolls in cotton. The main objective of this study was to determine whether insecticide-free tropical milkweed (Asclepias curassavica L.), a nectar-producing plant, can increase parasitism of these bugs by Trichopoda pennipes (F.) (Diptera: Tachinidae) and provide nectar to monarch butterflies and insect pollinators in these farmscapes. Peanut-cotton plots with and without flowering milkweed plants were established in 2009 and 2010. Adult T. pennipes, monarch butterflies, honey bees, and native insect pollinators readily fed on floral nectar of milkweed. Monarch larvae feeding on milkweed vegetation successfully developed into pupae. In 2009, N. viridula was the primary host of T. pennipes in cotton, and parasitism of this pest by the parasitoid was significantly higher in milkweed cotton (61.6%) than in control cotton (13.3%). In 2010, parasitism of N. viridula, C. hilaris, and L. phyllopus by T. pennipes was significantly higher in milkweed cotton (24.0%) than in control cotton (1.1%). For both years of the study, these treatment differences were not owing to a response by the parasitoid to differences in host density, because density of hosts was not significantly different between treatments. In conclusion, incorporation of milkweed in peanut-cotton plots increased stink bug parasitism in cotton and provided nectar to insect pollinators and monarch butterflies.

Effects of Bed Rest on Conduction Velocity of the Triceps Surae Stretch Reflex and Postural Control

Science.gov (United States)

Reschke, M. F.; Wood, S. J.; Cerisano, J. M.; Kofman, I. S.; Fisher, E. A.; Esteves, J. T.; Taylor, L. C.; DeDios, Y. E.; Harm, D. L.

2011-01-01

Despite rigorous exercise and nutritional management during space missions, astronauts returning from microgravity exhibit neuromuscular deficits and a significant loss in muscle mass in the postural muscles of the lower leg. Similar changes in the postural muscles occur in subjects participating in long-duration bed rest studies. These adaptive muscle changes manifest as a reduction in reflex conduction velocity during head-down bed rest. Because the stretch reflex encompasses both the peripheral (muscle spindle and nerve axon) and central (spinal synapse) components involved in adaptation to calf muscle unloading, it may be used to provide feedback on the general condition of neuromuscular function, and might be used to evaluate the effectiveness of countermeasures aimed at preserving muscle mass and function during periods of unloading. Stretch reflexes were measured on 18 control subjects who spent 60 to 90 days in continuous 6 deg head-down bed rest. Using a motorized system capable of rotating the foot around the ankle joint (dorsiflexion) through an angle of 10 degrees at a peak velocity of about 250 deg/sec, a stretch reflex was recorded from the subject's left triceps surae muscle group. Using surface electromyography, about 300 reflex responses were obtained and ensemble-averaged on 3 separate days before bed rest, 3 to 4 times in bed, and 3 times after bed rest. The averaged responses for each test day were examined for reflex latency and conduction velocity (CV) across gender. Computerized posturography was also conducted on these same subjects before and after bed rest as part of the standard measures. Peak-to-peak sway was measured during Sensory Organization Tests (SOTs) to evaluate changes in the ability to effectively use or suppress visual, vestibular, and proprioceptive information for postural control. Although no gender differences were found, a significant increase in reflex latency and a significant decrease in CV were observed during the bed

Near-infrared spectroscopy monitoring and control of the fluidized bed granulation and coating processes-A review.

Science.gov (United States)

Liu, Ronghua; Li, Lian; Yin, Wenping; Xu, Dongbo; Zang, Hengchang

2017-09-15

The fluidized bed granulation and pellets coating technologies are widely used in pharmaceutical industry, because the particles made in a fluidized bed have good flowability, compressibility, and the coating thickness of pellets are homogeneous. With the popularization of process analytical technology (PAT), real-time analysis for critical quality attributes (CQA) was getting more attention. Near-infrared (NIR) spectroscopy, as a PAT tool, could realize the real-time monitoring and control during the granulating and coating processes, which could optimize the manufacturing processes. This article reviewed the application of NIR spectroscopy in CQA (moisture content, particle size and tablet/pellet thickness) monitoring during fluidized bed granulation and coating processes. Through this review, we would like to provide references for realizing automated control and intelligent production in fluidized bed granulation and pellets coating of pharmaceutical industry. Copyright © 2017 Elsevier B.V. All rights reserved.

MENGGALI METRIK YANG PENTING DALAM RANGKAIAN AKTIVITAS PERUBAHAN PERANGKAT LUNAK UNTUK MEMPREDIKSI BUG DENGAN ATURAN ASOSIASI

Directory of Open Access Journals (Sweden)

Achmad Arwan

2014-01-01

Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Dalam evolusi perangkat lunak terdapat rangkaian aktivitas proses perubahan yang kemudian oleh Nachiapan diformulasikan menjadi metrik-metrik yang mampu memprediksi bug secara presisi. Akan tetapi secara spesifik belum ditemukan seberapa besar pengaruh masing-masing metrik tersebut terhadap hasil prediksi sebuah bug. Penelitian ini mengusulkan pengukuran jumlah kemunculan metrik dengan kemunculan bug pada proyek eclipse. Sehingga dengan penelitian ini dapat diketahui metrik -metrik mana yang penting dalam prediksi kemunculan bug. Aturan asosiasi dalam penggalian data telah dipergunakan secara luas untuk menggali variabel-variabel saling terkait dalam sampel data. Metrik-metrik dalam proyek eclipse kemudian digali dengan aturan asosiasi untuk mendapatkan metrik yang muncul bersama bug. Hasil pengujian menunjukkan bahwa metrik Numberofchangeslate rata-rata kemunculannya sebesar 46,9%, sedangkan metrik Peopletotal muncul bersama bug rata-rata sebesar 43,57% dan metrik Numberofchangesearly memiliki kemunculan rata-rata 14% sehingga ketiga metrik tersebut merupakan metrik yang penting dalam memprediksi bug.

Edge effects of stink bugs in corn, cotton, peanut and soybean fields adjacent to woodland.

Science.gov (United States)

Producers face significant crop losses from stink bug species in the southeastern USA, but the high mobility and polyphagy of the bugs make predictions of their presence in crops difficult. While there is some evidence that they colonize crops from adjacent crops, there are no studies of their colo...

Economic Injury Level of the Neotropical Brown Stink Bug Euschistus heros (F.) on Cotton Plants.

Science.gov (United States)

Soria, M F; Degrande, P E; Panizzi, A R; Toews, M D

2017-06-01

In Brazil, the Neotropical brown stink bug, Euschistus heros (F.) (Hemiptera: Pentatomidae), commonly disperses from soybeans to cotton fields. The establishment of an economic treatment threshold for this pest on cotton crops is required. Infestation levels of adults of E. heros were evaluated on cotton plants at preflowering, early flowering, boll filling, and full maturity by assessing external and internal symptoms of injury on bolls, seed cotton/lint production, and fiber quality parameters. A completely randomized experiment was designed to infest cotton plants in a greenhouse with 0, 2, 4, 6, and 8 bugs/plant, except at the full-maturity stage in which only infestation with 8 bugs/plant and uninfested plants were evaluated. Results indicated that the preflowering, early-flowering, and full-maturity stages were not affected by E. heros. A linear regression model showed a significant increase in the number of internal punctures and warts in the boll-filling stage as the population of bugs increased. The average number of loci with mottled immature fibers was significantly higher at 4, 6, and 8 bugs compared with uninfested plants with data following a quadratic regression model. The seed and lint cotton was reduced by 18 and 25% at the maximum level of infestation (ca. 8 bugs/plant) in the boll-filling stage. The micronaire and yellowing indexes were, respectively, reduced and increased with the increase of the infestation levels. The economic injury level of E. heros on cotton plants at the boll-filling stage was determined as 0.5 adult/plant. Based on that, a treatment threshold of 0.1 adult/plant can be recommended to avoid economic losses.

Biomass fueled fluidized bed combustion: atmospheric emissions, emission control devices and environmental regulations

International Nuclear Information System (INIS)

Grass, S.W.; Jenkins, B.M.

1994-01-01

Fluidized bed combustors have become the technological choice for power generation from biomass fuels in California. Atmospheric emission data obtained during compliance tests are compared for five operating 18 to 32 MW fluidized bed combustion power plants. The discussion focuses on the impact of fuel properties and boiler design criteria on the emission of pollutants, the efficiency of pollution control devices, and regulations affecting atmospheric emissions. Stack NO x emission factors are shown not to vary substantially among the five plants which burn fuels with nitrogen concentrations between 0.3 and 1.1% dry weight. All facilities use at least one particular control device, but not all use limestone injection or other control techniques for sulfur and chlorine. The lack of control for chlorine suggests the potential for emission of toxic species due to favorable temperature conditions existing in the particulate control devices, particularly when burning fuels containing high concentrations of chlorine. (Author)

Test-bed Assessment of Communication Technologies for a Power-Balancing Controller

DEFF Research Database (Denmark)

Findrik, Mislav; Pedersen, Rasmus; Hasenleithner, Eduard

2016-01-01

and control. In this paper, we present a Smart Grid test-bed that integrates various communication technologies and deploys a power balancing controller for LV grids. Control performance of the introduced power balancing controller is subsequently investigated and its robustness to communication network cross......Due to growing need for sustainable energy, increasing number of different renewable energy resources are being connected into distribution grids. In order to efficiently manage a decentralized power generation units, the smart grid will rely on communication networks for information exchange...

Development of a Torque Sensor-Based Test Bed for Attitude Control System Verification and Validation

Science.gov (United States)

2017-12-30

AFRL-RV-PS- AFRL-RV-PS- TR-2018-0008 TR-2018-0008 DEVELOPMENT OF A TORQUE SENSOR- BASED TEST BED FOR ATTITUDE CONTROL SYSTEM VERIFICATION AND...Sensor-Based Test Bed for Attitude Control System Verification & Validation 5a. CONTRACT NUMBER FA9453-15-1-0315 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...NUMBER 62601F 6. AUTHOR(S) Norman Fitz-Coy 5d. PROJECT NUMBER 4846 5e. TASK NUMBER PPM00015968 5f. WORK UNIT NUMBER EF125135 7. PERFORMING

Verde plant bug, Creontiades signatus (Hemiptera: Miridae) effects of insect density and bloom period of infestation on cotton damage and yield

Science.gov (United States)

The verde plant bug, Creontiades signatus Distant (Hemiptera: Miridae), has emerged as a threat to cotton in South Texas, causing boll damage similar to boll-feeding stink bugs (Hemiptera: Pentatomidae). Verde plant bugs were released into caged cotton for a one-week period to characterize the effec...

Control, data acquisition and analysis for the JET neutral injection test bed

International Nuclear Information System (INIS)

Jones, T.T.C.; Brenan, P.R.; Rodgers, M.E.; Stork, D.; Young, I.D.

1985-01-01

The Neutral Injection Test-Bed (NITB) is a major experimental assembly in support of the Neutral Beam Heating Programme for JET. In addition to its prime function of testing the Neutral Injection hardware, the Test Bed serves as the prototype to test the computer control and data acquisition system, which is described in this paper. The software system has been written in a portable, data-driven manner with the aim to adapt it, with only minor modifications to the operation of the first. Neutral Injection Beamline on JET, which will involve operation both synchronous and asynchronous with that of the JET Tokamak

BIOLOGICAL FEATURES OF TARAN (RUTILUS HECKELII OF THE DNIEPER-BUG ESTUARY SYSTEM

Directory of Open Access Journals (Sweden)

K. Geina

2016-03-01

Full Text Available Purpose. To analyze morphological variability and basic biological features of the modern stock of taran of the Dnieper-Bug estuary system in the conditions of the transformed Dnieper flow. Methodology. Morphological variability was determined based on the comparison of morphological features of roach Rutilus rutilus (Linnaeus, 1758 of the Kakhovka reservoir and semi-migratory taran Rutilus rutilus heckelii (Nordmann, 1840 of the Dnieper-Bug estuary system. As a main criterion of the evaluation of the taran stock biological state, we used age, sex structure, growth characteristics, fecundity and condition factor. Fish sampling was carried out at stationary monitoring-observation stations of the Institute of Fisheries NAAS of Ukraine. Field and cameral processing of the collected materials were performed based on conventional methods and guidelines. Findings. Morphological variability analysis demonstrated significant differences between Dnieper and Bug taran. The highest differences were observed for antroventral distance (td=11.19. Significant differences were also observed for antenanal and ventroanal distances td=4.05-4.14. No significant differences were found for meristic features. There were also significant differences between Dnieper-Bug taran and Kakhovka reservoir roach, which had formed a resident form after regulating the Dnieper River flow. Kakhovka reservoir roach is more deep-bodied with Н=32.79%, t-test value was 5.65. Pelvic fins were more shifted to the caudal fin (td=5.28 that resulted in significant difference (p<0.05 in ventroanal distance (td=4.26. Taran also had somewhat smaller length of the anal fin base (td=4.73 but its height was higher – td=5.78. The main peculiarity of the current biological state of taran stock is the domination of young age groups. The small number of fish in the boundary groups of the age series right wing with relative stability of growth features indicate on intensive pressure on the

Altered gene regulation and potential association with metabolic resistance development to imidacloprid in the tarnished plant bug, Lygus lineolaris

Science.gov (United States)

Chemical spray on cotton is almost an exclusive method for control of tarnished plant bug (TPB, Lygus lineolaris). Frequent use of imidacloprid is a concern for neonicotinoid resistance in this key pest. Information of how and why TPB become less susceptible to imidacloprid is essential for effectiv...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Part 1: Structure Part 2: Origin Part 3: Function Textbook Study notes Image library 3-D animated ... nail care Injured skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site= ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... aging skin care Kids’ zone About skin: Your body's largest organ About hair: Not just on your ... bug bite, such as a rash, fever, or body aches, see your doctor or a board-certified ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... bites Although most bug bites are harmless, some can spread dangerous diseases like Zika virus, dengue, Lyme ... and tuck your shirt into your pants. You can also pre-treat outer layers of clothing with ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... and treatments Acne and rosacea Bumps and growths Color problems Contagious skin diseases Cosmetic treatments Dry / sweaty ... prevent bug bites, dermatologists recommend the following tips: Use insect repellent. To protect against mosquitoes, ticks and ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care ... bites and stings can be safely treated at home. To treat bug bites and stings at home, ...

Bed erosion control at 60 degree river confluence using vanes

Science.gov (United States)

Wuppukondur, Ananth; Chandra, Venu

2017-04-01

Confluences are common occurrences along natural rivers. Hydrodynamics at the confluence is complex due to merging of main and lateral flows with different characteristics. Bed erosion occurs at the confluence due to turbulence and also secondary circulation induced by centrifugal action of the lateral flow. The eroded sediment poses various problems in the river ecosystem including river bank failure. Reservoirs are majorly affected due to sediment deposition which reduces storage capacity. The bed erosion also endangers stability of pipeline crossings and bridge piers. The aim of this experimental study is to check the performance of vanes in controlling bed erosion at the confluence. Experiments are performed in a 600 confluence mobile bed model with a non-uniform sediment of mean particle size d50 = 0.28mm. Discharge ratio (q=ratio of lateral flow discharge to main flow discharge) is maintained as 0.5 and 0.75 with a constant average main flow depth (h) of 5cm. Vanes of width 0.3h (1.5cm) and thickness of 1 mm are placed along the mixing layer at an angle of 150, 300 and 600(with respect to main flow) to perform the experiments. Also, two different spacing of 2h and 3h (10cm and 15cm) between the vanes are used for conducting the experiments. A digital point gauge with an accuracy of ±0.1mm is used to measure bed levels and flow depths at the confluence. An Acoustic Doppler Velocitimeter (ADV) with a frequency of 25Hz and accuracy of ±1mm/s is used to measure flow velocities. Maximum scour depth ratio Rmax, which is ratio between maximum scour depth (Ds) and flow depth (h), is used to present the experimental results.From the experiments without vanes, it is observed that the velocities are increasing along the mixing layer and Rmax=0.82 and 1.06, for q=0.5 and 0.75, respectively. The velocities reduce with vanes since roughness increases along the mixing layer. For q=0.5 and 0.75, Rmax reduces to 0.62 and 0.7 with vanes at 2h spacing, respectively. Similarly

The characteristics of bed agglomeration during fluidized bed combustion of eucalyptus bark

International Nuclear Information System (INIS)

Chaivatamaset, Pawin; Tia, Suvit

2015-01-01

The bed agglomeration behaviors were investigated experimentally when eucalyptus bark was burning tested in a laboratory scale fluidized bed reactor. The focuses of this work were the influences of operating conditions and bed materials on the bed agglomeration tendency and the elucidation in the behaviors of fuel inorganic elements and the governing mode of the agglomeration. It was found that the defluidization caused by the bed agglomeration was clearly detectable from the decrease in measured bed pressure. The growth of bed particle and accumulation of agglomerates during combustion provided the partial to complete defluidization. The defluidization was promoted by the increase of bed temperature and bed particle size, and the decrease of fluidizing air velocity. The SEM-EDS analyses revealed that the bed agglomeration was mainly attributed to the formation of potassium silicate compounds as liquid phase during the combustion. This was initiated by the chemical reaction between the bed particle and the released ash constituents. In this study, the inorganic migration from fuel particle to bed particle was likely dominated by the condensation/reaction. The thermodynamic examination by ternary phase diagram analysis corroborated that the liquid phase formation of the ash derived materials controlled the agglomeration. The alumina sand prevented the bed agglomeration since it was inactive in the formation of viscous molten substances during combustion at the observed temperatures. - Highlights: • The behaviors of bed agglomeration were studied during the fluidized bed combustion of eucalyptus bark. • The increase in bed temperature and sand size, and the decrease of air velocity promoted bed defluidization. • The formation of molten potassium silicate compounds conduced to the bed agglomeration. • Condensation/reaction was the dominant inorganic migration mechanism from fuel particle to bed particle. • The alumina sand prevented effectively the bed

Determination of pressure distribution in an aerated bed in a controlled pilot-scale compost reactor

Energy Technology Data Exchange (ETDEWEB)

Solowiej, P. [Warmia and Mazury Univ., Olsztyn (Poland)

2010-07-01

This study investigated the effectiveness of dealing with biological waste by composting. In particular, it examined the feasibility of recovering excess thermal energy produced in the process of composting biological waste in terms of mass and energy transport parameters required in the aerated compost bed. An experiment was performed in which a 100 dm{sup 3} adiabatic, leak-tight reactor equipped with a controlled aeration system was constructed to study the temperature and pressure distribution in the bed. Sensors were used to determine the amount and humidity of emitted gases under variable external physical conditions. The perforated bottom of the reactor allowed for bed aeration. As such, the humidity and heat were transported upwards, forced by the air pumped in and by natural convection. In terms of pressure distribution inside the composted and aerated bed, the study results showed that there were considerable differences in pressure for the selected places of the bed of the composted biological material. An increase in upwards pressure was observed in the heap throughout the experiment. Pressure differences in the same plane of the bed were also noted. The study results should facilitate the development of a model of mass and energy transport in a bed of composted material.

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Particularly if you’re visiting areas with known insect-borne diseases, it’s important to take steps to ... bug bites, dermatologists recommend the following tips: Use insect repellent. To protect against mosquitoes, ticks and other ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Choosing Wisely Education Online Learning Center MOC Recognized Credit Basic Derm Curriculum Teaching and learning guides Suggested ... it’s important to take steps to reduce your risk. To help prevent bug bites, dermatologists recommend the ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... and Lectureship Clarence S. Livingood Award and Lectureship Marion B. Sulzberger Award and Lectureship Master Dermatologist Award Members ... skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs.con.aad. ...

Recolonization of bat roost by bat bugs (Cimex pipistrelli): could parasite load be a cause of bat roost switching?

Science.gov (United States)

Bartonička, Tomáš; Růžičková, Lucie

2013-04-01

Roost ectoparasites are believed to have a negative impact on fitness of their hosts as birds or mammals. Previous studies were mostly focussed on the synchronization between reproduction cycles of ectoparasites and hosts living in infested roosts. However, to date, it has not been examined how fast ectoparasites colonize new, non-infested roosts and thus increasing the impact on the local populations of hosts. The parasite-host model was studied, including bat bugs Cimex pipistrelli and soprano pipistrelles Pipistrellus pygmaeus, where bat behaviour was observed which tended to reduce the parasite load in bat roosts. We investigated (1) whether bats change their roosting behaviour when we discontinued synchronization of their reproduction and the life cycle of the bat bugs and (2) how fast and which stages of bat bugs reoccupy cleaned roosts. In a 3-year field experiment, we removed all bat bugs from six bat boxes in each spring. Pipistrelles bred young in all non-infested boxes during these 3 years. In addition, 8 years of regular observations before this experiment indicate that bats avoided breeding in the same bat boxes at all. Bat bugs were found again in clean boxes in mid-May. However, their densities did not maximise before the beginning of June, before parturition. A re-appearance of bugs was observed after 21-56 days after the first bat visit. Adult bugs, mainly females, colonised cleaned boxes first though at the same time there were a lot of younger and smaller instars in non-manipulated roosts in the vicinity.

Big-Eyed Bugs Have Big Appetite for Pests

Science.gov (United States)

Many kinds of arthropod natural enemies (predators and parasitoids) inhabit crop fields in Arizona and can have a large negative impact on several pest insect species that also infest these crops. Geocoris spp., commonly known as big-eyed bugs, are among the most abundant insect predators in field c...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... hair, and nail care Skin care Hair care / hair loss Injured skin Nail care Anti-aging skin care ... hair, and nail care Skin care Hair care / hair loss Injured skin Blisters Bug bites and stings How ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... care Injured skin Bug bites and stings "); (function () { var a = "", b = [ "adid=aad-aad-1", "site=ehs. ... t", "hpos=l", "zone=public", "mcat1=de12", ]; for (var c = 0; c "); (function () { var a = "", b = [ "adid= ...

A Transcriptome Survey Spanning Life Stages and Sexes of the Harlequin Bug, Murgantia histrionica

Directory of Open Access Journals (Sweden)

Michael E. Sparks

2017-05-01

Full Text Available The harlequin bug, Murgantia histrionica (Hahn, is an agricultural pest in the continental United States, particularly in southern states. Reliable gene sequence data are especially useful to the development of species-specific, environmentally friendly molecular biopesticides and effective biolures for this insect. Here, mRNAs were sampled from whole insects at the 2nd and 4th nymphal instars, as well as sexed adults, and sequenced using Illumina RNA-Seq technology. A global assembly of these data identified 72,540 putative unique transcripts bearing high levels of similarity to transcripts identified in other taxa, with over 99% of conserved single-copy orthologs among insects being detected. Gene ontology and protein family analyses were conducted to explore the functional potential of the harlequin bug’s gene repertoire, and phylogenetic analyses were conducted on gene families germane to xenobiotic detoxification, including glutathione S-transferases, carboxylesterases and cytochrome P450s. Genic content in harlequin bug was compared with that of the closely related invasive pest, the brown marmorated stink bug, Halyomorpha halys (Stål. Quantitative analyses of harlequin bug gene expression levels, experimentally validated using quantitative real-time PCR, identified genes differentially expressed between life stages and/or sexes.

Pheromone of the banana-spotting bug, amblypelta lutescens lutescens Distant (Hemiptera: Coreidae): identification, synthesis and field bioassay

Science.gov (United States)

The banana spotting bug Amblypelta lutescens lutescens Distant (Hemiptera: Coreidae) is one of the principal pests of tree fruits and nuts across northern and eastern Australia. Apart from damage assessments in orchards, there are currently no other methods for monitoring bug activity to aid manage...

2016 All Bugs Good and Bad Webinar Series - eXtension

Science.gov (United States)

Importadas Resources Instructional Videos Publications Top of the Mound Game Fire Ant Images from BugMugs.org Breeding and Genomics Sheep Small and Backyard Flocks Small Meat Processors Sustainable Marine Fisheries

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Mohs AUC MyDermPath+ Psoriasis Patient education resources Practice Management Center Coding and reimbursement Coding MACRA Fee schedule ... it’s important to take steps to reduce your risk. To help prevent bug bites, dermatologists recommend the ...

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... dress appropriately to prevent bug bites. Cover exposed skin as much as possible by wearing long-sleeved shirts, pants, socks and closed shoes instead of sandals. For additional protection, pull your socks up over your pants and ...

Melt With This Kiss: Paralyzing and Liquefying Venom of The Assassin Bug Pristhesancus plagipennis (Hemiptera: Reduviidae).

Science.gov (United States)

Walker, Andrew A; Madio, Bruno; Jin, Jiayi; Undheim, Eivind A B; Fry, Bryan G; King, Glenn F

2017-04-01

Assassin bugs (Hemiptera: Heteroptera: Reduviidae) are venomous insects, most of which prey on invertebrates. Assassin bug venom has features in common with venoms from other animals, such as paralyzing and lethal activity when injected, and a molecular composition that includes disulfide-rich peptide neurotoxins. Uniquely, this venom also has strong liquefying activity that has been hypothesized to facilitate feeding through the narrow channel of the proboscis-a structure inherited from sap- and phloem-feeding phytophagous hemipterans and adapted during the evolution of Heteroptera into a fang and feeding structure. However, further understanding of the function of assassin bug venom is impeded by the lack of proteomic studies detailing its molecular composition.By using a combined transcriptomic/proteomic approach, we show that the venom proteome of the harpactorine assassin bug Pristhesancus plagipennis includes a complex suite of >100 proteins comprising disulfide-rich peptides, CUB domain proteins, cystatins, putative cytolytic toxins, triabin-like protein, odorant-binding protein, S1 proteases, catabolic enzymes, putative nutrient-binding proteins, plus eight families of proteins without homology to characterized proteins. S1 proteases, CUB domain proteins, putative cytolytic toxins, and other novel proteins in the 10-16-kDa mass range, were the most abundant venom components. Thus, in addition to putative neurotoxins, assassin bug venom includes a high proportion of enzymatic and cytolytic venom components likely to be well suited to tissue liquefaction. Our results also provide insight into the trophic switch to blood-feeding by the kissing bugs (Reduviidae: Triatominae). Although some protein families such as triabins occur in the venoms of both predaceous and blood-feeding reduviids, the composition of venoms produced by these two groups is revealed to differ markedly. These results provide insights into the venom evolution in the insect suborder

Formal solution for the fields within a beam-bug calibrator

International Nuclear Information System (INIS)

Fessenden, T J.

1998-01-01

For some time I was bothered by the fact that measurements of offsets in the various bug calibration setups never agreed with the simple formulae (2) used for determining electron beam position in the Livermore induction linacs and transport systems. About 1983 I realized that the discrepancy arises from the way the bug calibrator simulates an electron beam in a conducting pipe. At that time I solved the problem using the method presented here. Unfortunately, I did not write it up at that time. After considerable effort, I was able to repeat the calculation. Since I have little confidence that after a few years I could ever do it again, I felt obliged to write it up in some detail. Our beam bug calibrator consists of two conducting cylinders, nominally concentric, that simulate the electron beam within a drift tube. The radii of the larger cylinder is 2.3 times that of the smaller giving an electrical impedance of 50 Ohms to the coaxial combination. To simulate a beam off-axis within a drift tube, the inner tube is moved relative to the outer tube. This only approximately simulates the motion of a beam because the surface current on the inner tube redistributes in response to the translation. Fortunately, the fields of the translated inner cylinder can be found exactly using complex variable theory (1)

The application of quality control circle in neurosurgery ICU nurses in raising compliance of the head of a bed

Directory of Open Access Journals (Sweden)

Na LI

2014-11-01

Full Text Available Objective: To explore the application of quality control circle in raising compliance of the head of a bed in neurosurgery ICU nurses. Methods: The quality control circle was made up of 4 ICU nurses, determine the subject in order to improve the neurosurgery ICU nurses in raising compliance of the head of a bed, according to the QCC activity steps to formulate plans, including grasp the current situation, goal setting, through analysis, circle members develop strategy and plan implementation and review, finally compared the situation before and after neurosurgery ICU nurses raised bed activities compliance. Results: After implementation of QCC, neurosurgery ICU nurses raised bed to 30 ~ 45 degrees. After activities, circle members in the team cooperation ability, cohesion, to accept new things ability, and innovative thinking ability and to raise the understanding of the relevant knowledge of the head of a bed has improved significantly. Conclusion: The application of quality management circle activity improves the neurosurgery ICU nurses effectively raise the compliance of the head of a bed, improve the comprehensive quality of the clinical nurses.

Apocalypse deterred : oil and gas community pulls out ahead in vaccinating itself against Y2K, the millennium bug

International Nuclear Information System (INIS)

Gordon, M.

1999-01-01

Results of a survey of the membership of the Canadian Association of Petroleum Producers (CAPP) regarding efforts to deal with the threat posed by the Y2K millennium bug are reviewed. Survey results reveal that CAPP's 170 member companies take the year 2000 date rollover very seriously, and the vast majority (99 per cent) have formal action plans to deal with the threat. The vast majority of plans have components that take into account the effects of the computer glitch on inventories, compliance and risk assessment matters, correction and replacement. All are doing testing and assessments involving business partners, and are developing contingency plans to keep operating if any problems develop despite all the efforts currently underway. Test results to date show low failure rates in field production control equipment. The current focus is on contingency plans for higher risk items. The downstream sector of the industry, involving transportation, distribution and retail marketing, is making similar efforts to minimize the threat of the Y2K bug, sometimes to the point of switching to new and improved equipment to vaccinate all its major operations against the expected computer failure. The cost of coping with the millennium bug is colossal. Canadian governments expect the cost to reach three billion dollars to purge the bug from government operations alone. Estimates of world-wide cost run to 530 billion dollars, plus another trillion dollars to clean up the aftermath of infections. Nevertheless, the current assessment is that the back of the problem has been broken at least in Canada, the United States and Western Europe. Nevertheless, there is no justification for complacency just yet

Computer games to teach hygiene: an evaluation of the e-Bug junior game.

Science.gov (United States)

Farrell, David; Kostkova, Patty; Weinberg, Julius; Lazareck, Lisa; Weerasinghe, Dasun; Lecky, Donna M; McNulty, Cliodna A M

2011-06-01

Handwashing, respiratory hygiene and antibiotic resistance remain major public health concerns. In order to facilitate an effective outcome when teaching the basic principles of hand and respiratory hygiene, educational interventions should first target school children. As computer games are ubiquitous in most children's lives, e-Bug developed computer games targeted at teaching children handwashing, respiratory hygiene and antibiotic resistance. The games were designed for two target audiences: junior school children (9-12 year olds); and senior school children (13-15 year olds). Between May and August 2009, the finalized junior game underwent an evaluation in three UK schools (in Glasgow, Gloucester and London), involving 62 children in the schools and ∼ 1700 players accessing the junior game online. The e-Bug junior game consists of a number of levels of play, each of which promotes a set of learning outcomes (LOs). These LOs, complementary to those in the e-Bug packs, are expressed through the game mechanics (the rules of the game) rather than through story or dialogue. Although the junior game's evaluation demonstrated a statistically significant change in the knowledge for only a small number of given LOs, because many children had the required knowledge already before playing the game, this is e-Bug's first statistical study on the junior game and the first comprehensive evaluation of its kind. Future work includes a re-examination of the quiz-style questionnaires utilized in this study and an exploration of the potential knowledge change acquired strictly through engagement.

Single and multiple in-season measurements as indicators of at-harvest cotton boll damage caused by verde plant bug (Hemiptera: Miridae).

Science.gov (United States)

Brewer, Michael J; Armstrong, J Scott; Parker, Roy D

2013-06-01

The ability to monitor verde plant bug, Creontiades signatus Distant (Hemiptera: Miridae), and the progression of cotton, Gossypium hirsutum L., boll responses to feeding and associated cotton boll rot provided opportunity to assess if single in-season measurements had value in evaluating at-harvest damage to bolls and if multiple in-season measurements enhanced their combined use. One in-season verde plant bug density measurement, three in-season plant injury measurements, and two at-harvest damage measurements were taken in 15 cotton fields in South Texas, 2010. Linear regression selected two measurements as potentially useful indicators of at-harvest damage: verde plant bug density (adjusted r2 = 0.68; P = 0.0004) and internal boll injury of the carpel wall (adjusted r2 = 0.72; P = 0.004). Considering use of multiple measurements, a stepwise multiple regression of the four in-season measurements selected a univariate model (verde plant bug density) using a 0.15 selection criterion (adjusted r2 = 0.74; P = 0.0002) and a bivariate model (verde plant bug density-internal boll injury) using a 0.25 selection criterion (adjusted r2 = 0.76; P = 0.0007) as indicators of at-harvest damage. In a validation using cultivar and water regime treatments experiencing low verde plant bug pressure in 2011 and 2012, the bivariate model performed better than models using verde plant bug density or internal boll injury separately. Overall, verde plant bug damaging cotton bolls exemplified the benefits of using multiple in-season measurements in pest monitoring programs, under the challenging situation when at-harvest damage results from a sequence of plant responses initiated by in-season insect feeding.

American Trypanosomiasis (Also Known as Chagas Disease) Triatomine Bug FAQs

Science.gov (United States)

... are typically found in the southern United States, Mexico, Central America, and South America (as far south ... feed on the blood of mammals (including humans), birds, and reptiles. Triatomine bugs live in a wide ...

Identification and MPC control of a circulation fluidized bed boiler using an LPV model

NARCIS (Netherlands)

Huang, J.; Ji, G.; Zhu, Y.; Lin, W.; Kothare, M.; Tade, M.; Vande Wouwer, A.; Smets, I.

2010-01-01

This work studies the identification and control of circulation fluidized bed (CFB) boilers. The CFB boiler under investigation shows strong nonlinearity due to big changes of steam load. A linear parameter varying (LPV) model is used to represent the process dynamics and used in control. The steam

Design and control of the precise tracking bed based on complex electromechanical design theory

Science.gov (United States)

Ren, Changzhi; Liu, Zhao; Wu, Liao; Chen, Ken

2010-05-01

The precise tracking technology is wide used in astronomical instruments, satellite tracking and aeronautic test bed. However, the precise ultra low speed tracking drive system is one high integrated electromechanical system, which one complexly electromechanical design method is adopted to improve the efficiency, reliability and quality of the system during the design and manufacture circle. The precise Tracking Bed is one ultra-exact, ultra-low speed, high precision and huge inertial instrument, which some kind of mechanism and environment of the ultra low speed is different from general technology. This paper explores the design process based on complex electromechanical optimizing design theory, one non-PID with a CMAC forward feedback control method is used in the servo system of the precise tracking bed and some simulation results are discussed.

Virtual Reality Check: Teachers Use Bug-in-Ear Coaching to Practice Feedback Techniques with Student Avatars

Science.gov (United States)

Elford, Marti; Carter, Richard A., Jr.; Aronin, Sara

2013-01-01

There is not just one way to give feedback, nor is there just one kind of feedback. Bug-in-ear technology, which allows coaches to give teachers in the classroom immediate feedback, has been used successfully for 35 years. In an updated twist on this method, researchers at the University of Kansas used bug-in-ear coaching in a virtual classroom…

Seasonal and regional dynamics of M. ulcerans transmission in environmental context: deciphering the role of water bugs as hosts and vectors.

Science.gov (United States)

Marion, Estelle; Eyangoh, Sara; Yeramian, Edouard; Doannio, Julien; Landier, Jordi; Aubry, Jacques; Fontanet, Arnaud; Rogier, Christophe; Cassisa, Viviane; Cottin, Jane; Marot, Agnès; Eveillard, Matthieu; Kamdem, Yannick; Legras, Pierre; Deshayes, Caroline; Saint-André, Jean-Paul; Marsollier, Laurent

2010-07-06

Buruli ulcer, the third mycobacterial disease after tuberculosis and leprosy, is caused by the environmental mycobacterium M. ulcerans. Various modes of transmission have been suspected for this disease, with no general consensus acceptance for any of them up to now. Since laboratory models demonstrated the ability of water bugs to transmit M. ulcerans, a particular attention is focused on the transmission of the bacilli by water bugs as hosts and vectors. However, it is only through detailed knowledge of the biodiversity and ecology of water bugs that the importance of this mode of transmission can be fully assessed. It is the objective of the work here to decipher the role of water bugs in M. ulcerans ecology and transmission, based on large-scale field studies. The distribution of M. ulcerans-hosting water bugs was monitored on previously unprecedented time and space scales: a total of 7,407 water bugs, belonging to large number of different families, were collected over one year, in Buruli ulcer endemic and non endemic areas in central Cameroon. This study demonstrated the presence of M. ulcerans in insect saliva. In addition, the field results provided a full picture of the ecology of transmission in terms of biodiversity and detailed specification of seasonal and regional dynamics, with large temporal heterogeneity in the insect tissue colonization rate and detection of M. ulcerans only in water bug tissues collected in Buruli ulcer endemic areas. The large-scale detection of bacilli in saliva of biting water bugs gives enhanced weight to their role in M. ulcerans transmission. On practical grounds, beyond the ecological interest, the results concerning seasonal and regional dynamics can provide an efficient tool in the hands of sanitary authorities to monitor environmental risks associated with Buruli ulcer.

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... Private payer Medicare physician payment MACRA implementation Alternative payment models Fee schedule State policy State policy and action ... a dermatologist Why see a board-certified dermatologist? Home Public and patients Skin, hair, and nail care Injured skin Bug bites and stings "); (function () { var ...

Biochemical Assay Detects Feeding Damage to Loblolly Pine Seeds Caused by the Leaffooted Pine Seed Bug (Hemiptera: Coreidae)

Science.gov (United States)

Cameron G. Lait; Daniel R. Miller; Sarah L. Bates; John H. Borden; Allison R. Kermode

2003-01-01

A large number of proteins in salivary gland extracts of the leaffooted pine seed bug, Leptoglossus corculus Say, were strongly recognized by a polyclonal antibody-based assay developed for detecting saliva of the western conifer seed bug, Lepfoglossus occidentalis Heidemann, in lodgepole pine, Pinus contorta var...

The Bad Bugs Book Club: Science, Literacy, and Engagement

Directory of Open Access Journals (Sweden)

Joanna Verran

2013-01-01

Full Text Available The Bad Bugs Bookclub was launched in 2009. It comprises scientists and non-scientists. The aim of the Bookclub is to read and discuss novels where infectious disease forms part of the plot, in order to enhance learning about microbiology. The focus of the discussion is on appreciation of the novel, its scientific (microbiologic accuracy and relevance to contemporary microbiology. There are several potential audiences for the Bad Bugs Bookclub, for example students in a classroom setting, or in a more social environment, and/or the general public.  Meeting reports and reading guides have been posted on a dedicated website. For education purposes, additional project work for assessment is suggested for students reading each novel. Bookclub meetings may be held on particular dates in the microbiologic calendar, coupled with additional public engagement activities and student participation. The approach has significant flexibility in terms of intended audience, assessment and extension work, and provides a refreshing and stimulating alternative means for talking about microbiology.

Comparative Mitogenomics of Plant Bugs (Hemiptera: Miridae): Identifying the AGG Codon Reassignments between Serine and Lysine

Science.gov (United States)

Wang, Pei; Song, Fan; Cai, Wanzhi

2014-01-01

Insect mitochondrial genomes are very important to understand the molecular evolution as well as for phylogenetic and phylogeographic studies of the insects. The Miridae are the largest family of Heteroptera encompassing more than 11,000 described species and of great economic importance. For better understanding the diversity and the evolution of plant bugs, we sequence five new mitochondrial genomes and present the first comparative analysis of nine mitochondrial genomes of mirids available to date. Our result showed that gene content, gene arrangement, base composition and sequences of mitochondrial transcription termination factor were conserved in plant bugs. Intra-genus species shared more conserved genomic characteristics, such as nucleotide and amino acid composition of protein-coding genes, secondary structure and anticodon mutations of tRNAs, and non-coding sequences. Control region possessed several distinct characteristics, including: variable size, abundant tandem repetitions, and intra-genus conservation; and was useful in evolutionary and population genetic studies. The AGG codon reassignments were investigated between serine and lysine in the genera Adelphocoris and other cimicomorphans. Our analysis revealed correlated evolution between reassignments of the AGG codon and specific point mutations at the antidocons of tRNALys and tRNASer(AGN). Phylogenetic analysis indicated that mitochondrial genome sequences were useful in resolving family level relationship of Cimicomorpha. Comparative evolutionary analysis of plant bug mitochondrial genomes allowed the identification of previously neglected coding genes or non-coding regions as potential molecular markers. The finding of the AGG codon reassignments between serine and lysine indicated the parallel evolution of the genetic code in Hemiptera mitochondrial genomes. PMID:24988409

Verde plant bug associatioin with boll damage including cotton boll rot and potential in-season indicators of damage

Science.gov (United States)

Cotton along the Gulf Coast of south Texas has experienced loss from cotton boll rot especially during the last 10 to 15 years, and stink bugs and plant bugs (Hemiptera: Pentatomidae and Miridae) that feed on cotton bolls have been suspected in introducing the disease. A replicated grower field surv...

Space station environmental control and life support systems test bed program - an overview

Science.gov (United States)

Behrend, Albert F.

As the National Aeronautics and Space Administration (NASA) begins to intensify activities for development of the Space Station, decisions must be made concerning the technical state of the art that will be baselined for the initial Space Station system. These decisions are important because significant potential exists for enhancing system performance and for reducing life-cycle costs. However, intelligent decisions cannot be made without an adequate assessment of new and ready technologies, i.e., technologies which are sufficiently mature to allow predevelopment demonstrations to prove their application feasibility and to quantify the risk associated with their development. Therefore, the NASA has implemented a technology development program which includes the establishment of generic test bed capabilities in which these new technologies and approaches can be tested at the prototype level. One major Space Station subsystem discipline in which this program has been implemented is the environmental control and life support system (ECLSS). Previous manned space programs such as Gemini, Apollo, and Space Shuttle have relied heavily on consumables to provide environmental control and life support services. However, with the advent of a long-duration Space Station, consumables must be reduced within technological limits to minimize Space Station resupply penalties and operational costs. The use of advanced environmental control and life support approaches involving regenerative processes offers the best solution for significant consumables reduction while also providing system evolutionary growth capability. Consequently, the demonstration of these "new technologies" as viable options for inclusion in the baseline that will be available to support a Space Station initial operational capability in the early 1990's becomes of paramount importance. The mechanism by which the maturity of these new regenerative life support technologies will be demonstrated is the Space

RNAi analysis of Deformed, proboscipedia and Sex combs reduced in the milkweed bug Oncopeltus fasciatus: novel roles for Hox genes in the hemipteran head.

Science.gov (United States)

Hughes, C L; Kaufman, T C

2000-09-01

Insects have evolved a large variety of specialized feeding strategies, with a corresponding variability in mouthpart morphology. We have, however, little understanding of the developmental mechanisms that underlie this diversity. Until recently it was difficult to perform any analysis of gene function outside of the genetic model insects Drosophila melanogaster and Tribolium castaneum. In this paper, we report the use of dsRNA-mediated interference (RNAi) to dissect gene function in the development of the milkweed bug Oncopeltus fasciatus, which has specialized suctorial mouthparts. The Hox genes Deformed (Dfd), proboscipedia (pb) and Sex combs reduced (Scr) have previously been shown to be expressed in the gnathal appendages of this species. Strikingly, the milkweed bug was found to have an unusual expression pattern of pb. Here, by analyzing single and combination RNAi depletions, we find that Dfd, pb and Scr are used in the milkweed bug to specify the identity of the mouthparts. The exact roles of the genes, however, are different from what is known in the two genetic model insects. The maxillary appendages in the bug are determined by the activities of the genes Dfd and Scr, rather than Dfd and pb as in the fly and beetle. The mandibular appendages are specified by Dfd, but their unique morphology in Oncopeltus suggests that Dfd's target genes are different. As in flies and beetles, the labium is specified by the combined activities of pb and Scr, but again, the function of pb appears to be different. Additionally, the regulatory control of pb by the other two genes seems to be different in the bug than in either of the other species. These novelties in Hox function, expression pattern and regulatory relationships may have been important for the evolution of the unique Hemipteran head.

Insecticide assays against the brown stink bug feeding on pecan

Science.gov (United States)

The brown stink bug, Euschistus servus (Say) (Hemiptera: Pentatomidae), is an economic pest of pecan, Carya illinoinensis (Wangenh) K. Koch (Juglandaceae), and other agronomic crops across the southeastern U.S. Management of this pest is mainly via insecticides. Many commercial products indicate o...

ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Wei-Ping Pan; Andy Wu; John T. Riley

2004-10-30

This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period July 1, 2004 through September 30, 2004. The following tasks have been completed. First, renovation of the new Combustion Laboratory and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building have started. Second, the design if the component parts of the CFBC system have been reviewed and finalized so that the drawings may be released to the manufacturers during the next quarter. Third, the experiments for solid waste (chicken litter) incineration have been conducted using a Thermogravimetric Analyzer (TGA). This is in preparation for testing in the simulated fluidized-bed combustor. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter has been outlined in this report.

Respiratory function of the plastron in the aquatic bug Aphelocheirus aestivalis (Hemiptera, Aphelocheiridae).

Science.gov (United States)

Seymour, Roger S; Jones, Karl K; Hetz, Stefan K

2015-09-01

The river bug Aphelocheirus aestivalis is a 40 mg aquatic insect that, as an adult, relies totally on an incompressible physical gill to exchange respiratory gases with the water. The gill (called a 'plastron') consists of a stationary layer of air held in place on the body surface by millions of tiny hairs that support a permanent air-water interface, so that the insect never has to renew the gas at the water's surface. The volume of air in the plastron is extremely small (0.14 mm(3)), under slightly negative pressure and connected to the gas-filled tracheal system through spiracles on the cuticle. Here, we measure PO2 of the water and within the plastron gas with O2-sensing fibre optics to understand the effectiveness and limitations of the gas exchanger. The difference in PO2 is highest in stagnant water and decreases with increasing convection over the surface. Respiration of bugs in water-filled vials varies between 33 and 296 pmol O2 s(-1), depending on swimming activity. The effective thickness of the boundary layer around the plastron was calculated from respiration rate, PO2 difference and plastron surface area, according to the Fick diffusion equation and verified by direct measurements with the fibre-optic probes. In stagnant water, the boundary layer is approximately 500 μm thick, which nevertheless can satisfy the demands of resting bugs, even if the PO2 of the free water decreases to half that of air saturation. Active bugs require thinner boundary layers (∼ 100 μm), which are achieved by living in moving water or by swimming. © 2015. Published by The Company of Biologists Ltd.

Fluidization quality analyzer for fluidized beds

Science.gov (United States)

Daw, C.S.; Hawk, J.A.

1995-07-25

A control loop and fluidization quality analyzer for a fluidized bed utilizes time varying pressure drop measurements. A fast-response pressure transducer measures the overall bed pressure drop, or over some segment of the bed, and the pressure drop signal is processed to produce an output voltage which changes with the degree of fluidization turbulence. 9 figs.

Bug bites and stings: When to see a dermatologist

Medline Plus

Full Text Available ... 0; c public SPOT Skin Cancer™ Diseases and treatments Skin, hair, and nail care Skin care Hair care / hair loss Injured skin Blisters Bug bites and stings How to remove a tick How to treat a bee sting When to see a dermatologist Burns Frostbite Splinters Treating sunburn Wound care Nail care ...

Bug22p, a conserved centrosomal/ciliary protein also present in higher plants, is required for an effective ciliary stroke in Paramecium.

Science.gov (United States)

Laligné, C; Klotz, C; de Loubresse, N Garreau; Lemullois, M; Hori, M; Laurent, F X; Papon, J F; Louis, B; Cohen, J; Koll, F

2010-04-01

Centrioles, cilia, and flagella are ancestral conserved organelles of eukaryotic cells. Among the proteins identified in the proteomics of ciliary proteins in Paramecium, we focus here on a protein, Bug22p, previously detected by cilia and basal-body high-throughput studies but never analyzed per se. Remarkably, this protein is also present in plants, which lack centrioles and cilia. Bug22p sequence alignments revealed consensus positions that distinguish species with centrioles/cilia from plants. In Paramecium, antibody and green fluorescent protein (GFP) fusion labeling localized Bug22p in basal bodies and cilia, and electron microscopy immunolabeling refined the localization to the terminal plate of the basal bodies, the transition zone, and spots along the axoneme, preferentially between the membrane and the microtubules. RNA interference (RNAi) depletion of Bug22p provoked a strong decrease in swimming speed, followed by cell death after a few days. High-speed video microscopy and morphological analysis of Bug22p-depleted cells showed that the protein plays an important role in the efficiency of ciliary movement by participating in the stroke shape and rigidity of cilia. The defects in cell swimming and growth provoked by RNAi can be complemented by expression of human Bug22p. This is the first reported case of complementation by a human gene in a ciliate.

Characterization and Comparative Analysis of Olfactory Receptor Co-Receptor Orco Orthologs Among Five Mirid Bug Species

Directory of Open Access Journals (Sweden)

Qi Wang

2018-03-01

Full Text Available The phytophagous mirid bugs of Apolygus lucorum, Lygus pratensis as well as three Adelphocoris spp., including Adelphocoris lineolatus, A. suturalis, and A. fasciaticollis are major pests of multiple agricultural crops in China, which have distinct geographical distribution and occurrence ranges. Like many insect species, these bugs heavily rely on olfactory cues to search preferred host plants, thereby investigation on functional co-evolution and divergence of olfactory genes seems to be necessary and is of great interest. In the odorant detection pathway, olfactory receptor co-receptor (Orco plays critical role in the perception of odors. In this study, we identified the full-length cDNA sequences encoding three putative Orcos (AsutOrco, AfasOrco, and LpraOrco in bug species of A. suturalis, A. fasciaticollis, and L. pratensis based on homology cloning method. Next, sequence alignment, membrane topology and gene structure analysis showed that these three Orco orthologs together with previously reported AlinOrco and AlucOrco shared high amino acid identities and similar topology structure, but had different gene structure especially at the length and insertion sites of introns. Furthermore, the evolutional estimation on the ratios of non-synonymous to synonymous (Ka/Ks revealed that Orco genes were under strong purifying selection, but the degrees of variation were significant different between genera. The results of quantitative real-time PCR experiments showed that these five Orco genes had a similar antennae-biased tissue expression pattern. Taking these data together, it is thought that Orco genes in the mirid species could share conserved olfaction roles but had different evolution rates. These findings would lay a foundation to further investigate the molecular mechanisms of evolutionary interactions between mirid bugs and their host plants, which might in turn contribute to the development of pest management strategy for mirid bugs.

Aflatoxin Contamination Detected in Nutrient and Anti-Oxidant Rich Edible Stink Bug Stored in Recycled Grain Containers.

Directory of Open Access Journals (Sweden)

Robert Musundire

Full Text Available Recently, there has been multi-agency promotion of entomophagy as an environmentally-friendly source of food for the ever increasing human population especially in the developing countries. However, food quality and safety concerns must first be addressed in this context. We addressed these concerns in the present study using the edible stink bug Encosternum delegorguei, which is widely consumed in southern Africa. We analysed for mycotoxins, and health beneficials including antioxidants, amino acids and essential fatty acids using liquid chromatography coupled to quadrupole time of flight mass spectrometry (LC-Qtof-MS and coupled gas chromatography (GC-MS. We also performed proximate analysis to determine nutritional components. We identified the human carcinogen mycotoxin (aflatoxin B1 at low levels in edible stink bugs that were stored in traditonally woven wooden dung smeared baskets and gunny bags previously used to store cereals. However, it was absent in insects stored in clean zip lock bags. On the other hand, we identified 10 fatty acids, of which 7 are considered essential fatty acids for human nutrition and health; 4 flavonoids and 12 amino acids of which two are considered the most limiting amino acids in cereal based diets. The edible stink bug also contained high crude protein and fats but was a poor source of minerals, except for phosphorus which was found in relatively high levels. Our results show that the edible stink bug is a nutrient- and antioxidant-rich source of food and health benefits for human consumption. As such, use of better handling and storage methods can help eliminate contamination of the edible stink bug with the carcinogen aflatoxin and ensure its safety as human food.

Aflatoxin Contamination Detected in Nutrient and Anti-Oxidant Rich Edible Stink Bug Stored in Recycled Grain Containers.

Science.gov (United States)

Musundire, Robert; Osuga, Isaac M; Cheseto, Xavier; Irungu, Janet; Torto, Baldwyn

2016-01-01

Recently, there has been multi-agency promotion of entomophagy as an environmentally-friendly source of food for the ever increasing human population especially in the developing countries. However, food quality and safety concerns must first be addressed in this context. We addressed these concerns in the present study using the edible stink bug Encosternum delegorguei, which is widely consumed in southern Africa. We analysed for mycotoxins, and health beneficials including antioxidants, amino acids and essential fatty acids using liquid chromatography coupled to quadrupole time of flight mass spectrometry (LC-Qtof-MS) and coupled gas chromatography (GC)-MS. We also performed proximate analysis to determine nutritional components. We identified the human carcinogen mycotoxin (aflatoxin B1) at low levels in edible stink bugs that were stored in traditonally woven wooden dung smeared baskets and gunny bags previously used to store cereals. However, it was absent in insects stored in clean zip lock bags. On the other hand, we identified 10 fatty acids, of which 7 are considered essential fatty acids for human nutrition and health; 4 flavonoids and 12 amino acids of which two are considered the most limiting amino acids in cereal based diets. The edible stink bug also contained high crude protein and fats but was a poor source of minerals, except for phosphorus which was found in relatively high levels. Our results show that the edible stink bug is a nutrient- and antioxidant-rich source of food and health benefits for human consumption. As such, use of better handling and storage methods can help eliminate contamination of the edible stink bug with the carcinogen aflatoxin and ensure its safety as human food.

Simulating the 2012 High Plains drought using three single column versions (SCM) of BUGS5

Science.gov (United States)

Medina, I. D.; Denning, S.

2013-12-01

The impact of changes in the frequency and severity of drought on fresh water sustainability is a great concern for many regions of the world. One such location is the High Plains, where the local economy is primarily driven by fresh water withdrawals from the Ogallala Aquifer, which accounts for approximately 30% of total irrigation withdrawals from all U.S. aquifers combined. Modeling studies that focus on the feedback mechanisms that control the climate and eco-hydrology during times of drought are limited, and have used conventional General Circulation Models (GCMs) with grid length scales ranging from one hundred to several hundred kilometers. Additionally, these models utilize crude statistical parameterizations of cloud processes for estimating sub-grid fluxes of heat and moisture and have a poor representation of land surface heterogeneity. For this research, we will focus on the 2012 High Plains drought and will perform numerical simulations using three single column versions (SCM) of BUGS5 (Colorado State University (CSU) GCM coupled to the Simple Biosphere Model (SiB3)) at multiple sites overlying the Ogallala Aquifer for the 2011-2012 periods. In the first version of BUGS5, the model will be used in its standard bulk setting (single atmospheric column coupled to a single instance of SiB3), secondly, the Super-Parameterized Community Atmospheric Model (SP-CAM), a cloud resolving model (CRM consists of 64 atmospheric columns), will replace the single CSU GCM atmospheric parameterization and will be coupled to a single instance of SiB3, and for the third version of BUGS5, an instance of SiB3 will be coupled to each CRM column of the SP-CAM (64 CRM columns coupled to 64 instances of SiB3). To assess the physical realism of the land-atmosphere feedbacks simulated at each site by all versions of BUGS5, differences in simulated energy and moisture fluxes will be computed between the 2011 and 2012 period and will be compared to differences calculated using

Detection of fungi from rice black bug Paraeucosmetus pallicornis Dallas (Hemiptera: Lygaeidae) and inhibition with crude extract of Calatropis gigantea (Asclepiadaceae)

Science.gov (United States)

Sjam, S.; Surapati, U.; Adiwena; Syatri, A.; Dewi, V. S.; Rosmana, A.

2018-05-01

Rice black bug (P. palicornis) is one of the pests that attack the rice plants in the generative phase that causes the rice easily destroyed when milled and tasted bitter after cooking hence reduces the quality and quantity of rice. The bitter taste in rice may be due to the fungus associated with rice black bug. The aimed of this research was to detect the associated fungi with rice black bug P. pallicornis using some sterilization methods and inhibition with of leaf crude extract of C. gigatea. Detection of fungi from P. pallicornis was conducted using three sterilization methods and control (without sterilization) namely: (1) sterilization with aquades + alcohol 70% (5, 10, 15 and 20 times dipping) + aquades; (2) aquades + alcohol 70% (10 and 20 times dipping); (3) Aquades + alcohol 90 %+ NaCl 0.5 % +alcohol 90 % + aquades. Inhibition of fungi from P. pallicornis with crude extract of C. gigantea obtained by maceration method and then made some concentration to see the effect of its inhibition on the fungi associated with the P. pallicornis. The results showed that without sterilization, four microbe were obtained: Gliocladium sp., Aspergillus sp., black hyphae fungus and white hyphae fungus, sterilization method of Aquades + alcohol 70% with 5 times dipping in alcohol obtained Gliocladium sp., 10 and 20 times dipping found Aspergillus sp. and Gliocladium sp and 15 times dipping found Aspergillus sp. Sterilization with 10 and 20 times dipping in alcohol 70% then washing 2 times with aquades found Gliogladium sp. and Aspergillus sp. Sterilization with Aquades + alcohol 90 % + NaCl 0.5% + alcohol 90% + aquades found Gliocladium sp. Crude extract of C. gigantea had the potential to inhibit fungi Aspergillus sp. and Gliocladium sp. from rice black bug.

Fluidized bed selective pyrolysis of coal

Science.gov (United States)

Shang, Jer Y.; Cha, Chang Y.; Merriam, Norman W.

1992-01-01

The present invention discloses a process for the pyrolysis of coal which comprises the effective utilization of two zonal inclined fluidized beds, where said zones can be selectively controlled as to temperature and heating rate. The first zonal inclined fluidized bed serves as a dryer for crushed coal and additionally is controlled to selectively pyrolyze said coal producing substantially carbon dioxide for recycle use. The second zonal inclined fluidized bed further pyrolyzes the coal to gaseous, liquid and char products under controlled temperature and heating rate zones designed to economically integrate the product mix. The gas and liquid products are recovered from the gaseous effluent stream while the char which remains can be further treated or utilized in a subsequent process step.

Carbon bed mercury emissions control for mixed waste treatment.

Science.gov (United States)

Soelberg, Nick; Enneking, Joe

2010-11-01

Mercury has various uses in nuclear fuel reprocessing and other nuclear processes, and so it is often present in radioactive and mixed (radioactive and hazardous) wastes. Compliance with air emission regulations such as the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards can require off-gas mercury removal efficiencies up to 99.999% for thermally treating some mixed waste streams. Test programs have demonstrated this level of off-gas mercury control using fixed beds of granular sulfur-impregnated activated carbon. Other results of these tests include (1) the depth of the mercury control mass transfer zone was less than 15-30 cm for the operating conditions of these tests; (2) MERSORB carbon can sorb mercury up to 19 wt % of the carbon mass; and (3) the spent carbon retained almost all (98.3-99.99%) of the mercury during Toxicity Characteristic Leachability Procedure (TCLP) tests, but when even a small fraction of the total mercury dissolves, the spent carbon can fail the TCLP test when the spent carbon contains high mercury concentrations.

Improving operability of spouted beds using a simple optimizing control structure

Directory of Open Access Journals (Sweden)

N. A. CORRÊA

1999-12-01

Full Text Available In operations using spouted beds, it is of major importance, from an energy consumption point of view, to operate the process as close as possible to the minimum spout flow. At this point, the speed of the gas (for example, warm air in drying operations is greater than the amount of heat and mass transfer involved, although it only transfers the minimum amount of momentum to maintain the spout. Therefore, by staying close to this minimum flow condition, it is possible to perform a stable operation and to obtain energy savings not only in the heating of the gas but also in its displacement by blowers. In order to improve the operation of such processes, a study is carried out by implementing a simple optimizing control structure on a spouted bed experimental set-up. The air flow is regulated by a frequency inverter, at the speed of blower rotation. A PI controller was used and the set-point for the air flow rate is calculated on-line by a simple and well-known minimization method called Golden Section Search. This set-point is constantly updated with values very close to the actual minimum spout flow rate. To accomplish the calculations and data acquisitions, a microcomputer with an interface and an analog signal conditioner is used .

Analysis of Genetic Variation and Phylogeny of the Predatory Bug, Pilophorus typicus, in Japan using Mitochondrial Gene Sequences

OpenAIRE

Ito, Katsura; Nishikawa, Hiroshi; Shimada, Takuji; Ogawa, Kohei; Minamiya, Yukio; Tomoda, Masafumi; Nakahira, Kengo; Kodama, Rika; Fukuda, Tatsuya; Arakawa, Ryo

2011-01-01

Pilophorus typicus (Distant) (Heteroptera: Miridae) is a predatory bug occurring in East, Southeast, and South Asia. Because the active stages of P. typicus prey on various agricultural pest insects and mites, this species is a candidate insect as an indigenous natural enemy for use in biological control programs. However, the mass releasing of introduced natural enemies into agricultural fields may incur the risk of affecting the genetic integrity of species through hybridization with a loca...

Femoral Test Bed for Impedance Controlled Surgical Instrumentation

Directory of Open Access Journals (Sweden)

Christian Brendle

2012-01-01

Full Text Available The risk for patients during the standard procedure of revision of cemented artificial hip joints is unsatisfactorily highdue to its high level of invasiveness and limited access to the operative field. To reduce this risk we are developing anImpedance Controlled Surgical Instrumentation (ICOS system, which aims to establish real-time control during a BoneCement (BC milling process. For this, the relationship between the thickness of the BC and its frequency-dependentelectrical impedance is used to estimate the residual BC thickness. The aim is to avoid unintended cutting of boneby detecting the passage of the BC/bone boundary layer by the milling head. In a second step, an estimation of theresidual BC thickness will be used to improve process control. As a first step towards demonstrating the feasibility ofour approach, presented here are experimental studies to characterize the BC permittivity and to describe the process indetail. The results show that the permittivity properties of BC are dominated by its polymethyl methacrylate (PMMAfraction. Thus, PMMA can be used as a substitute for future experiments. Furthermore, a Femoral Test Bed (FTB wasdesigned. Using this setup we show it is feasible to accurately distinguish between slightly different thicknesses of BC.

Immune responses of a native and an invasive bird to Buggy Creek Virus (Togaviridae: Alphavirus and its arthropod vector, the swallow bug (Oeciacus vicarius.

Directory of Open Access Journals (Sweden)

Carol A Fassbinder-Orth

Full Text Available Invasive species often display different patterns of parasite burden and virulence compared to their native counterparts. These differences may be the result of variability in host-parasite co-evolutionary relationships, the occurrence of novel host-parasite encounters, or possibly innate differences in physiological responses to infection between invasive and native hosts. Here we examine the adaptive, humoral immune responses of a resistant, native bird and a susceptible, invasive bird to an arbovirus (Buggy Creek virus; Togaviridae: Alphavirus and its ectoparasitic arthropod vector (the swallow bug; Oeciacus vicarius. Swallow bugs parasitize the native, colonially nesting cliff swallow (Petrochelidon pyrrhonota and the introduced house sparrow (Passer domesticus that occupies nests in cliff swallow colonies. We measured levels of BCRV-specific and swallow bug-specific IgY levels before nesting (prior to swallow bug exposure and after nesting (after swallow bug exposure in house sparrows and cliff swallows in western Nebraska. Levels of BCRV-specific IgY increased significantly following nesting in the house sparrow but not in the cliff swallow. Additionally, house sparrows displayed consistently higher levels of swallow bug-specific antibodies both before and after nesting compared to cliff swallows. The higher levels of BCRV and swallow bug specific antibodies detected in house sparrows may be reflective of significant differences in both antiviral and anti-ectoparasite immune responses that exist between these two avian species. To our knowledge, this is the first study to compare the macro- and microparasite-specific immune responses of an invasive and a native avian host exposed to the same parasites.

Investigating Information Needs to Improve Cooperation Between Developers and Bug Reporters

NARCIS (Netherlands)

Breu, S.; Premraj, R.; Sillito, J.; Zimmermann, T.

2010-01-01

For many software projects, bug tracking systems play a central role in supporting collaboration between the developers and the users of the software. To better understand this collaboration and how tool support can be improved, we have quantitatively and qualitatively analysed the questions asked

Ecosystem-based incorporation of nectar-producing plants for stink bug parasitoids

Science.gov (United States)

Adult parasitoids of pest insects rely on floral resources for survival and reproduction but can be food-deprived in intensively managed agricultural systems lacking these resources. Stink bugs are serious pests of crops in southwest Georgia. Provisioning nectar-producing plants for parasitoids of s...

ESTABLISHMENT OF AN ENVIRONMENTAL CONTROL TECHNOLOGY LABORATORY WITH A CIRCULATING FLUIDIZED-BED COMBUSTION SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Wei-Ping Pan; Andy Wu; John T. Riley

2005-04-30

This report is to present the progress made on the project ''Establishment of an Environmental Control Technology Laboratory (ECTL) with a Circulating Fluidized-Bed Combustion (CFBC) System'' during the period January 1, 2005 through March 31, 2005. The following tasks have been completed. First, the renovation of the new Combustion Laboratory is nearly complete, and the construction of the Circulating Fluidized-Bed (CFB) Combustor Building is in the final stages. Second, the fabrication and manufacture of the CFBC Facility is being discussed with a potential contractor. Discussions with potential contactor regarding the availability of materials and current machining capabilities have resulted in the modification of the original designs. The selection of the fabrication contractor for the CFBC Facility is expected during the next quarter. Third, co-firing experiments conducted with coal and chicken waste have been initiated in the laboratory-scale simulated fluidized-bed facility. The experimental results from this study are presented in this report. Finally, the proposed work for the next quarter is described in this report.

Bedbugs in Schools? Halting a Possible Epidemic

Science.gov (United States)

Waldorf, Glenn

2012-01-01

Bedbugs are a growing problem in schools today. Bedbugs are often confused with other insects, and their signs are hard to recognize. School officials should work with an experienced pest control company to confirm whether the insects are bed bugs and, if they are not, to identify them so they can be treated effectively. Education and vigilance…

Environmental management through sluice gated bed-dam: a revived strategy for the control of Anopheles fluviatilis breeding in streams

Science.gov (United States)

Sahu, S.S.; Gunasekaran, K.; Jambulingam, P.

2014-01-01

Background & objectives: Integrated vector management (IVM) emphasizes sustainable eco-friendly methods and minimal use of chemicals. In this context, the present study highlights the environmental control of breeding of Anopheles fluviatilis, the primary malaria vector, through water management in a natural stream in Koraput district, Odisha, India. Methods: The District Rural Development Agency (DRDA), Koraput, constructed two bed-dams across streams, one in Barigaon and the other in Pipalapodar village. The bed-dam in the former village was fitted with two sluice gates whereas the bed dam constructed in the latter village was without the sluice gate. The sluice gates were opened once in a week on a fixed day to flush out the water from the dam. Anopheles immatures were sampled systematically in the streams using a dipper for density measurement and species composition. Results: There was a reduction of 84.9 per cent in the proportion of positive dips for Anopheles larvae/pupae and a reduction of 98.4 per cent in immature density (number/dip) of An. fluviatilis in the experimental downstream compared to the control following opening of the sluice gates. Interpretation & conclusions: Our findins showed that opening of sluice gates of the bed-dam regularly once in a week resulted in the control of vector breeding in the downstream due to the flushing effect of the water released with a high flow from the bed-dam that stagnated water in the upstream. The outcome of the study encourages upscaling this measure to other areas, wherever feasible. PMID:25297364

An Efficient Technique for Bayesian Modelling of Family Data Using the BUGS software

Directory of Open Access Journals (Sweden)

Harold T Bae

2014-11-01

Full Text Available Linear mixed models have become a popular tool to analyze continuous data from family-based designs by using random effects that model the correlation of subjects from the same family. However, mixed models for family data are challenging to implement with the BUGS (Bayesian inference Using Gibbs Sampling software because of the high-dimensional covariance matrix of the random effects. This paper describes an efficient parameterization that utilizes the singular value decomposition of the covariance matrix of random effects, includes the BUGS code for such implementation, and extends the parameterization to generalized linear mixed models. The implementation is evaluated using simulated data and an example from a large family-based study is presented with a comparison to other existing methods.

Variability of bed mobility in natural, gravel-bed channels and adjustments to sediment load at local and reach scales

Science.gov (United States)

Thomas E. Lisle; Jonathan M. Nelson; John Pitlick; Mary Ann Madej; Brent L. Barkett

2000-01-01

Abstract - Local variations in boundary shear stress acting on bed-surface particles control patterns of bed load transport and channel evolution during varying stream discharges. At the reach scale a channel adjusts to imposed water and sediment supply through mutual interactions among channel form, local grain size, and local flow dynamics that govern bed mobility...

An elementary introduction to Bayesian computing using WinBUGS.

Science.gov (United States)

Fryback, D G; Stout, N K; Rosenberg, M A

2001-01-01

Bayesian statistics provides effective techniques for analyzing data and translating the results to inform decision making. This paper provides an elementary tutorial overview of the WinBUGS software for performing Bayesian statistical analysis. Background information on the computational methods used by the software is provided. Two examples drawn from the field of medical decision making are presented to illustrate the features and functionality of the software.

Uranium bed oxidation vacuum process system

International Nuclear Information System (INIS)

McLeland, H.L.

1977-01-01

Deuterium and tritium gases are occluded in uranium powder for release into neutron generator tubes. The uranium powder is contained in stainless steel bottles, termed ''beds.'' If these beds become damaged, the gases must be removed and the uranium oxidized in order not to be flammable before shipment to ERDA disposal grounds. This paper describes the system and methods designed for the controlled degassing and oxidation process. The system utilizes sputter-ion, cryo-sorption and bellows pumps for removing the gases from the heated source bed. Removing the tritium gas is complicated by the shielding effect of helium-3, a byproduct of tritium decay. This effect is minimized by incremental pressure changes, or ''batch'' processing. To prevent runaway exothermic reaction, oxidation of the uranium bed is also done incrementally, or by ''batch'' processing, rather than by continuous flow. The paper discusses in detail the helium-3 shielding effect, leak checks that must be made during processing, bed oxidation, degree of gas depletion, purity of gases sorbed from beds, radioactivity of beds, bed disposal and system renovation

Agglomeration of bed material: Influence on efficiency of biofuel fluidized bed boiler

Directory of Open Access Journals (Sweden)

Ryabov Georgy A.

2003-01-01

Full Text Available The successful design and operation of a fluidized bed combustor requires the ability to control and mitigate ash-related problems. The main ash-related problem of biomass filing boiler is agglomeration. The fluidized bed boiler with steam capacity of 66 t/h (4 MPa, 440 °C was started up at the Arkhangelsk Paper-Pi dp-Plant in 2001. This boiler was manufactured by the Russian companies "Energosofin" and "Belenergomash" and installed instead of the existing boiler with mechanical grate. Some constructional elements and steam drum of existing boiler remained unchanged. The primary air fan was installed past the common air fan, which supply part of the air into 24 secondary airports. First operating period shows that the bed material is expanded and then operator should increase the primary air rate, and the boiler efficiency dramatically decreases. Tills paper presents some results of our investigations of fuel, bed and fly ash chemical compositions and other characteristics. Special experiments were carried out to optimize the bed drain flow rate. The influence of secondly air supply improvement on mixing with the main flow and boiler efficiency are given.

Selectivity of diacylhydrazine insecticides to the predatory bug Orius laevigatus: in vivo and modelling/docking experiments.

Science.gov (United States)

Amor, Fermín; Christiaens, Olivier; Bengochea, Paloma; Medina, Pilar; Rougé, Pierre; Viñuela, Elisa; Smagghe, Guy

2012-12-01

Knowledge of pesticide selectivity to natural enemies is necessary for a successful implementation of biological and chemical control methods in integrated pest management (IPM) programmes. Diacylhydrazine (DAH)-based ecdysone agonists, also known as moulting-accelerating compounds (MACs), are considered to be a selective group of insecticides, and their compatibility with predatory Heteroptera, which are used as biological control agents, is known. However, their molecular mode of action has not been explored in beneficial insects such as Orius laevigatus (Fieber) (Hemiptera: Anthocoridae). In this project, in vivo toxicity assays demonstrated that the DAH-based RH-5849, tebufenozide and methoxyfenozide have no toxic effect against O. laevigatus. The ligand-binding domain (LBD) of the ecdysone receptor (EcR) of O. laevigatus was sequenced, and a homology protein model was constructed that confirmed a cavity structure with 12 α-helices, harbouring the natural insect moulting hormone 20-hydroxyecdysone. However, docking studies showed that a steric clash occurred for the DAH-based insecticides owing to a restricted extent of the ligand-binding cavity of the EcR of O. laevigatus. The insect toxicity assays demonstrated that MACs are selective for O. laevigatus. The modelling/docking experiments are indications that these pesticides do not bind with the LBD-EcR of O. laevigatus and support the supposition that they show no biological effects in the predatory bug. These data help in explaining the compatible use of MACs together with predatory bugs in IPM programmes. Copyright © 2012 Society of Chemical Industry.

DIVERSITY OF THE SOUTHERN GREEN STINK BUG NEZARA VIRIDULA (L. (HETEROPTERA: PENTATOMIDAE

Directory of Open Access Journals (Sweden)

V MEGLIČ

2002-05-01

Full Text Available The southern green stink bug Nezara viridula (L. (Heteroptera: Pentatomidae is a global pest of considerable ecological, agricultural and economical interest. The ancestral home of this species is supposed to be Africa and/or Mediterranean and presumably it was spread worldwide during the last two centuries with human trade and agriculture. Bugs found today on different continents do not differ morphologically, however there are substantial differences in their mating behaviour. We used horizontal starch gel electrophoresis to determine the suitability of biochemical markers for assessment of genetic variation between geographically isolated populations of N. viridula. The initial survey of populations from Slovenia, France, French West Indies and Brazil resulted in the resolution of polymorphic banding patterns within the following enzyme systems: GPI, IDH, MDH, ME, MPI and PGM. Results indicate there are consistent differences among tested populations.

Countercurrent heat exchange and thermoregulation during blood-feeding in kissing bugs.

Science.gov (United States)

Lahondère, Chloé; Insausti, Teresita C; Paim, Rafaela Mm; Luan, Xiaojie; Belev, George; Pereira, Marcos H; Ianowski, Juan P; Lazzari, Claudio R

2017-11-21

Blood-sucking insects experience thermal stress at each feeding event on endothermic vertebrates. We used thermography to examine how kissing-bugs Rhodnius prolixus actively protect themselves from overheating. During feeding, these bugs sequester and dissipate the excess heat in their heads while maintaining an abdominal temperature close to ambient. We employed a functional-morphological approach, combining histology, µCT and X-ray-synchrotron imaging to shed light on the way these insects manage the flow of heat across their bodies. The close alignment of the circulatory and ingestion systems, as well as other morphological characteristics, support the existence of a countercurrent heat exchanger in the head of R. prolixus , which decreases the temperature of the ingested blood before it reaches the abdomen. This kind of system has never been described before in the head of an insect. For the first time, we show that countercurrent heat exchange is associated to thermoregulation during blood-feeding.

Development of a low-temperature two-stage fluidized bed incinerator for controlling heavy-metal emission in flue gases

International Nuclear Information System (INIS)

Peng, Tzu-Huan; Lin, Chiou-Liang; Wey, Ming-Yen

2014-01-01

This study develops a low-temperature two-stage fluidized bed system for treating municipal solid waste. This new system can decrease the emission of heavy metals, has low construction costs, and can save energy owing to its lower operating temperature. To confirm the treatment efficiency of this system, the combustion efficiency and heavy-metal emission were determined. An artificial waste containing heavy metals (chromium, lead, and cadmium) was used in this study. The tested parameters included first-stage temperature and system gas velocity. Results obtained using a thermogravimetric analyzer with a differential scanning calorimeter indicated that the first-stage temperature should be controlled to at least 400 °C. Although, a large amount of carbon monoxide was emitted after the first stage, it was efficiently consumed in the second. Loss of the ignition values of ash residues were between 0.005% and 0.166%, and they exhibited a negative correlation with temperature and gas velocity. Furthermore, the emission concentration of heavy metals in the two-stage system was lower than that of the traditional one-stage fluidized bed system. The heavy-metal emissions can be decreased by between 16% and 82% using the low-temperature operating process, silica sand adsorption, and the filtration of the secondary stage. -- Graphical abstract: Heavy-metal emission concentrations in flue gases under different temperatures and gas velocities (dashed line: average of the heavy-metal emission in flue gases in the one-stage fluidized-bed incinerator). Highlights: • Low temperature two-stage system is developed to control heavy metal. • The different first-stage temperatures affect the combustion efficiency. • Surplus CO was destroyed efficiently by the secondary fluidized bed combustor. • Metal emission in two-stage system is lower than in the traditional system. • Temperature, bed adsorption, and filtration are the main control mechanisms

Bug22p, a Conserved Centrosomal/Ciliary Protein Also Present in Higher Plants, Is Required for an Effective Ciliary Stroke in Paramecium ▿ †

Science.gov (United States)

Laligné, C.; Klotz, C.; Garreau de Loubresse, N.; Lemullois, M.; Hori, M.; Laurent, F. X.; Papon, J. F.; Louis, B.; Cohen, J.; Koll, F.

2010-01-01

Centrioles, cilia, and flagella are ancestral conserved organelles of eukaryotic cells. Among the proteins identified in the proteomics of ciliary proteins in Paramecium, we focus here on a protein, Bug22p, previously detected by cilia and basal-body high-throughput studies but never analyzed per se. Remarkably, this protein is also present in plants, which lack centrioles and cilia. Bug22p sequence alignments revealed consensus positions that distinguish species with centrioles/cilia from plants. In Paramecium, antibody and green fluorescent protein (GFP) fusion labeling localized Bug22p in basal bodies and cilia, and electron microscopy immunolabeling refined the localization to the terminal plate of the basal bodies, the transition zone, and spots along the axoneme, preferentially between the membrane and the microtubules. RNA interference (RNAi) depletion of Bug22p provoked a strong decrease in swimming speed, followed by cell death after a few days. High-speed video microscopy and morphological analysis of Bug22p-depleted cells showed that the protein plays an important role in the efficiency of ciliary movement by participating in the stroke shape and rigidity of cilia. The defects in cell swimming and growth provoked by RNAi can be complemented by expression of human Bug22p. This is the first reported case of complementation by a human gene in a ciliate. PMID:20118210

Influence of Type of Electric Bright Light on the Attraction of the African Giant Water Bug, Lethocerus indicus (Hemiptera: Belostomatidae

Directory of Open Access Journals (Sweden)

Luke Chinaru Nwosu

2012-01-01

Full Text Available This study investigated the influence of type of electric bright light (produced by fluorescent light tube and incandescent light bulb on the attraction of the African giant water bug, Lethocerus indicus (Hemiptera: Belostomatidae. Four fluorescent light tubes of 15 watts each, producing white-coloured light and four incandescent light bulbs of 60 watts each, producing yellow-coloured light, but both producing the same amount of light, were varied and used for the experiments. Collections of bugs at experimental house were done at night between the hours of 8.30 pm and 12 mid-night on daily basis for a period of four months per experiment in the years 2008 and 2009. Lethocerus indicus whose presence in any environment has certain implications was the predominant belostomatid bug in the area. Use of incandescent light bulbs in 2009 significantly attracted more Lethocerus indicus 103 (74.6% than use of fluorescent light tubes 35 (25.41% in 2008 [4.92=0.0001]. However, bug’s attraction to light source was not found sex dependent [>0.05; (>0.18=0.4286 and >0.28=0.3897]. Therefore, this study recommends the use of fluorescent light by households, campgrounds, and other recreational centres that are potentially exposed to the nuisance of the giant water bugs. Otherwise, incandescent light bulbs should be used when it is desired to attract the presence of these aquatic bugs either for food or scientific studies.

Tips for Travel

Science.gov (United States)

Avoid bringing bed bugs home by taking precautions when traveling such as inspecting bedding and luggage racks in hotel rooms, and upon returning home unpacking directly into a washing machine and dry at high temperatures.

Effective selection criteria for assessing the resistance of stink bugs complex in soybean

Directory of Open Access Journals (Sweden)

Fabiani da Rocha

2014-10-01

Full Text Available Soybean plants with resistance to the stink bug complex are currently selected by extremely labor-intensive methods, which limit the evaluation of a large number of genotypes. Thus, this paper proposed the use of an alternative trait underlying the selection of resistant genotypes under field conditions with natural infestation: the weight of healthy seeds (WHS. To this end, 24 genotypes were evaluated under two management systems: with systematic chemical control of insects (management I, and without control (management II. Different indices were calculated using grain weight (YP of management I and WHS of management II (YS . The high correlation between YS and the indices mean productivity, stress tolerance and geometric mean productivity, plus the agreement in determining the groups of genotypes with resistance and high yield indicate that WHS is a useful character in simultaneous selection for these traits.

Using multiple bed load measurements: Toward the identification of bed dilation and contraction in gravel-bed rivers

Science.gov (United States)

Marquis, G. A.; Roy, A. G.

2012-02-01

This study examines bed load transport processes in a small gravel-bed river (Béard Creek, Québec) using three complementary methods: bed elevation changes between successive floods, bed activity surveys using tags inserted into the bed, and bed load transport rates from bed load traps. The analysis of 20 flood events capable of mobilizing bed material led to the identification of divergent results among the methods. In particular, bed elevation changes were not consistent with the bed activity surveys. In many cases, bed elevation changes were significant (1 to 2 times the D50) even if the bed surface had not been activated during the flood, leading to the identification of processes of bed dilation and contraction that occurred over 10% to 40% of the bed surface. These dynamics of the river bed prevent accurate derivation of bed load transport rates from topographic changes, especially for low magnitude floods. This paper discusses the mechanisms that could explain the dilation and contraction of particles within the bed and their implications in fluvial dynamics. Bed contraction seems to be the result of the winnowing of the fine sediments under very low gravel transport. Bed dilation seems to occur on patches of the bed at the threshold of motion where various processes such as fine sediment infiltration lead to the maintenance of a larger sediment framework volume. Both processes are also influenced by flood history and the initial local bed state and in turn may have a significant impact on sediment transport and morphological changes in gravel-bed rivers.

Implementation of an Electric Vehicle Test Bed Controlled by a Virtual Power Plant for Contributing to Regulating Power Reserves

DEFF Research Database (Denmark)

Marra, Francesco; Sacchetti, Dario; Pedersen, Anders Bro

2012-01-01

and communication interfaces, is able to respond in real-time to smart grid control signals. The EV test bed is equipped with a Lithium-ion battery pack, a Battery Management System (BMS), a charger and a Vehicle-to-Grid (V2G) unit for feeding power back to the grid. The designed solution serves......With the increased focus on Electric Vehicles (EV) research and the potential benefits they bring for smart grid applications, there is a growing need for an evaluation platform connected to the electricity grid. This paper addresses the design of an EV test bed, which using real EV components...... requests from the Danish TSO are used as a proof-of-concept, to demonstrate the EV test bed power response. Test results have proven the capability to respond to frequent power control requests and they reveal the potential EV ability for contributing to regulating power reserves....

The Heteroptera of the Netherlands Antilles – V Tingidae (Lace Bugs)

NARCIS (Netherlands)

Drake, Carl J.; Cobben, R.H.

1960-01-01

The present paper is based upon the lace bugs, Family Tingidae, collected by the junior author in the West Indies, on the islands of Aruba, Curaçao, Bonaire, St. Martin, Saba, and St. Eustatius. This collection of several tingids comprises 17 species, including the five new forms described below.

Utilization of early soybeans for food and reproduction by the tarnished plant bug (Hemiptera: Miridae) in the delta of Mississippi.

Science.gov (United States)

Snodgrass, G L; Jackson, R E; Abel, C A; Perera, O P

2010-08-01

Commercially produced maturity group (MG) IV soybeans, Glycine max L., were sampled during bloom for tarnished plant bugs, Lygus lineolaris (Palisot de Beauvois), during May and June 1999 (3 fields) and 2001 (18 fields). The adults and nymphs were found primarily in single population peaks in both years, indicating a single new generation was produced during each year. The peak mean numbers of nymphs were 0.61 and 0.84 per drop cloth sample in 1999 and 2001, respectively. Adults peaked at 3.96 (1999) and 3.76 (2001) per sweep net sample (25 sweeps). Tests using laboratory-reared and field-collected tarnished plant bugs resulted in very poor survival of nymphs on 16 different soybean varieties (MG III, one; IV, four; V, nine; VI, two). A large cage (0.06 ha) field test found that the number of nymphs produced on eight soybean varieties after mated adults were released into the cages was lower than could be expected on a suitable host. These results indicated that soybean was a marginal host for tarnished plant bugs. However, the numbers of adults and nymphs found in the commercially produced fields sampled in the study may have been high enough to cause feeding damage to the flowering soybeans. The nature of the damage and its possible economic importance were not determined. Reproduction of tarnished plant bugs in the commercially produced early soybean fields showed that the early soybeans provided tarnished plant bugs with a very abundant host at a time when only wild hosts were previously available.

Insect bite reactions

Directory of Open Access Journals (Sweden)

Sanjay Singh

2013-01-01

Full Text Available Insects are a class of living creatures within the arthropods. Insect bite reactions are commonly seen in clinical practice. The present review touches upon the medically important insects and their places in the classification, the sparse literature on the epidemiology of insect bites in India, and different variables influencing the susceptibility of an individual to insect bites. Clinical features of mosquito bites, hypersensitivity to mosquito bites Epstein-Barr virus NK (HMB-EBV-NK disease, eruptive pseudoangiomatosis, Skeeter syndrome, papular pruritic eruption of HIV/AIDS, and clinical features produced by bed bugs, Mexican chicken bugs, assassin bugs, kissing bugs, fleas, black flies, Blandford flies, louse flies, tsetse flies, midges, and thrips are discussed. Brief account is presented of the immunogenic components of mosquito and bed bug saliva. Papular urticaria is discussed including its epidemiology, the 5 stages of skin reaction, the SCRATCH principle as an aid in diagnosis, and the recent evidence supporting participation of types I, III, and IV hypersensitivity reactions in its causation is summarized. Recent developments in the treatment of pediculosis capitis including spinosad 0.9% suspension, benzyl alcohol 5% lotion, dimethicone 4% lotion, isopropyl myristate 50% rinse, and other suffocants are discussed within the context of evidence derived from randomized controlled trials and key findings of a recent systematic review. We also touch upon a non-chemical treatment of head lice and the ineffectiveness of egg-loosening products. Knockdown resistance (kdr as the genetic mechanism making the lice nerves insensitive to permethrin is discussed along with the surprising contrary clinical evidence from Europe about efficacy of permethrin in children with head lice carrying kdr-like gene. The review also presents a brief account of insects as vectors of diseases and ends with discussion of prevention of insect bites and some

Design and adjustment on test bed of replacing subassembly machine control system for China experimental fast reactor

International Nuclear Information System (INIS)

Dong Shengguo; Ma Hongsheng; Zhao Lixia

2008-01-01

The present research concerns in the design and adjustment of replacing sub- assembly machine control system of China Experimental Fast Reactor. The design of replacing subassembly machine control system adopts some electric equipments, such as programmable controllers, digital DC drivers. The designed control system was adjusted on the test bed. The results indicate that the operation of the control system is steady and reliable, and designed control system can meet the needs of the design specification. (authors)

Comparative genomics evidence that only protein toxins are tagging bad bugs

Directory of Open Access Journals (Sweden)

Kalliopi eGeorgiades

2011-10-01

Full Text Available The term toxin was introduced by Roux and Yersin and describes macromolecular substances that, when produced during infection or when introduced parenterally or orally, cause an impairment of physiological functions that lead to disease or to the death of the infected organism. Long after the discovery of toxins, early genetic studies on bacterial virulence demonstrated that removing a certain number of genes from pathogenic bacteria decreases their capacity to infect hosts. Each of the removed factors was therefore referred to as a virulence factor, and it was speculated that non-pathogenic bacteria lack such supplementary factors. However, many recent comparative studies demonstrate that the specialization of bacteria to eukaryotic hosts is associated with massive gene loss. We recently demonstrated that the only features that seem to characterize 12 epidemic bacteria are toxin-antitoxin (TA modules, which are addiction molecules in host bacteria. In this study, we investigated if protein toxins are indeed the only molecules specific to pathogenic bacteria by comparing 14 epidemic bacterial killers (bad bugs with their 14 closest non-epidemic relatives (controls. We found protein toxins in significantly more elevated numbers in all of the bad bugs. For the first time, statistical principal components analysis, including genome size, GC%, TA modules, restriction enzymes and toxins, revealed that toxins are the only proteins other than TA modules that are correlated with the pathogenic character of bacteria. Moreover, intracellular toxins appear to be more correlated with the pathogenic character of bacteria than secreted toxins. In conclusion, we hypothesize that the only truly identifiable phenomena, witnessing the convergent evolution of the most pathogenic bacteria for humans are the loss of metabolic activities, i.e., the outcome of the loss of regulatory and transcription factors and the presence of protein toxins, alone or coupled as TA

BIOLOGICAL CHARACTERISTICS OF PRUSSIAN CARP (CARASSIUS AURATUS GIBELIO (BLOCH, 1782 COMMERCIAL STOCK OF THE DNIEPER-BUG ESTUARY

Directory of Open Access Journals (Sweden)

К. Heina

2017-09-01

Full Text Available Purpose. To provide the biological assessment of the silver Prussian carp (Carassius auratus gibelio (Bloch, 1782 commercial stock of the Dnieper-Bug estuary in the conditions of the transformed Dnieper river flow. Methodology. During the analysis of the biological state of the Prussian carp commercial stock, the main attention was given to the dynamics of age and sexual structure, length-weight growth rate, absolute fecundity and condition factor. The basic data were collected during the work of control-observation stations of the Institute of Fisheries in the Dnieper-Bug estuary during the current century. The collection and processing of ichthyological materials were performed in accordance with the generally accepted methodologies. Findings. The analysis showed that during the current century, the age structure of the Prussian carp of the Dnieper-Bug estuary was the most labile among other commercial cyprinids. It was found that as a result of an increase in the right wing of the age series, there was a gradual increase of the mean weighted age of its commercial stock. At the beginning of studies (2001-2002, the core of the stock was formed by age-3-6 fish (up ; however in subsequent years, a displacement of dominant groups toward the dominance of age-4-7 fish (more than 80% of the total stock was observed. At the same time, the relative number of age-3 fish (recruits was at a relatively high level – up to 10.6%. The linear growth varied more intensively until the age-5, but it reduced with ageing and did not show high variability. The body weight most variable was in age-4 fish (Cv=9.62%. The noted insignificant deviations in the body weight growth rate of the right wing of the age series was due to stable predominance of females in the stock structure, which were characterized by a variability of the mean weight as a result of different development of gonads. The dynamics of the age-related changes in the condition factor indicated on a

Feather bedding and childhood asthma associated with house dust mite sensitisation: a randomised controlled trial.

Science.gov (United States)

Glasgow, Nicholas J; Ponsonby, Anne-Louise; Kemp, Andrew; Tovey, Euan; van Asperen, Peter; McKay, Karen; Forbes, Samantha

2011-06-01

Observational studies report inverse associations between the use of feather upper bedding (pillow and/or quilt) and asthma symptoms but there is no randomised controlled trial (RCT) evidence assessing the role of feather upper bedding as a secondary prevention measure. To determine whether, among children not using feather upper bedding, a new feather pillow and feather quilt reduces asthma severity among house dust mite (HDM) sensitised children with asthma over a 1-year period compared with standard dust mite avoidance advice, and giving children a new mite-occlusive mattress cover. RCT. The Calvary Hospital in the Australian Capital Territory and the Children's Hospital at Westmead, Sydney, New South Wales. 197 children with HDM sensitisation and moderate to severe asthma. Intervention New upper bedding duck feather pillow and quilt and a mite-occlusive mattress cover (feather) versus standard care and a mite-occlusive mattress cover (standard). The proportion of children reporting four or more episodes of wheeze in the past year; an episode of speech-limiting wheeze; or one or more episodes of sleep disturbance caused by wheezing; and spirometry with challenge testing. Statistical analysis included multiple logistic and linear regression. No differences between groups were found for primary end points--frequent wheeze (OR 1.51, 95% CI 0.83 to 2.76, p=0.17), speech-limiting wheeze (OR 0.70, 95% CI 0.32 to 1.48, p=0.35), sleep disturbed because of wheezing (OR 1.17, 95% CI 0.64 to 2.13, p=0.61) or for any secondary end points. Secondary analyses indicated the intervention reduced the risk of sleep being disturbed because of wheezing and severe wheeze to a greater extent for children who slept supine. No differences in respiratory symptoms or lung function were observed 1 year after children with moderate-severe asthma and HDM sensitisation were given a mite-occlusive mattress cover and then received either feather upper bedding (pillow and quilt) or standard

Heat exchanger support apparatus in a fluidized bed

Science.gov (United States)

Lawton, Carl W.

1982-01-01

A heat exchanger is mounted in the upper portion of a fluidized combusting bed for the control of the temperature of the bed. A support, made up of tubes, is extended from the perforated plate of the fluidized bed up to the heat exchanger. The tubular support framework for the heat exchanger has liquid circulated therethrough to prevent deterioration of the support.

Tanning beds: A call to action for further educational and legislative efforts.

Science.gov (United States)

Farley, Clara; Alimi, Yewande; Espinosa, Lauren R; Perez, Sebastian; Knechtle, William; Hestley, Andrea; Carlson, Grant W; Russell, Maria C; Delman, Keith A; Rizzo, Monica

2015-08-01

Melanoma is steadily increasing over the past decade. Recent studies confirmed a link between tanning bed use and melanoma. We sought to determine the prevalence and frequency of tanning bed among young patients with melanoma. We retrospectively analyzed tanning bed use among young melanoma patients compared to controls selected from the hospital medical records. A telephone survey investigated family history of melanoma or skin cancer, hair color, eye color, skin type, tanning bed use, and patient awareness of dangers of tanning bed use. A total of 601 melanoma cases were identified; 265 (44%) completed the telephone survey as did 195 (31%) controls. Of these 460 subjects, 260 were female. Females were 3.0 times more likely to have used a tanning bed. Melanoma patients had natural light color hair, blue-green eyes, and 2.0 times more likely to use a tanning bed than controls. Among the tanning bed users, 90% were aware of danger of tanning bed. Our study found that tanning beds were more likely to be used by young women, the majority of whom are aware of the associated risks. Eliminating the use of tanning beds should be considered to decrease the incidence of melanoma. © 2015 Wiley Periodicals, Inc.

Evaluating impacts of brown marmorated stink bug on non-fruiting nursery crops

Science.gov (United States)

Halyomorpha halys, commonly known as the brown marmorated stink bug (BMSB), has become a major pest and nuisance since it arrived in the US in 1998 for both agricultural growers and homeowners. They can feed on ~200 different plant species, several of which are important ornamental crop species. The...

ENSAIO DE CONTROLE QUÍMICO ÀS PRINCIPAIS LAGARTAS E PERCEVEJOS DA SOJA EM GOIÁS ESSAY ON CHEMICAL CONTROL OF THE MAIN LARVAS AND CHINCH BUGS OF SOYBEAN IN GOIÁS

Directory of Open Access Journals (Sweden)

Valquíria da R. S. Veloso

2007-09-01

Full Text Available

Foi realizado em 1979/80, um ensaio de campo visando a avaliar a eficiência e adequar as doses dos inseticidas Bacillus thuringienses, Carbaryl , Clorpirifos , Deltametrina, Deltametrina + S 339, Endosulfan, Metil Paration, monocrotofos e triclorfon no combate a Anticarsia gemmatalis e Pseudoplusia includens. No mesmo ano, usaram-se os inseticidas Carbaryl Cyanamid AC 222 705, Deltametrina, Deltametrina + S 339, Dimetoato, Endosulfan, FMC 35001, Metil Paration, Monocrotofos, Permetrina, Phosalone + Paration Etil e Triciorfon, para o controle de Piezodorus guildinii, Nezara viridula e Euschistus heros. Todos os tratamentos foram aplicados em blocos ao acaso com quatro repetições. As avaliações de controle para lagartas foram efetuadas em 1, 2 e 7 dias após aplicação e para percevejos foram efetuadas em 2 e 7 dias após aplicação. Pelos resultados obtidos, verificou-se o seguinte: aA. gemmatalis foi sensível à maioria dos produtos; bapenas Clorpirifos Etil, Hetil Paration e Triclorfon não apresentaram eficiência acima de 80% para P. includens sete dias após a aplicação; c os inseticidas Monocrotofos, Metil Paration, Carbaryl e FMC 35001 mostraram eficiência acima de 80% para as espécies N. viridula e P. guildinii; Endosulfon e Dimetoato foram eficientes para controlar P. guildinii e E. heros.

During the 1979/80 planting period, a field test was performed to estimate the insecticides efficiency and adjust their doses in order to control Anticarsia qemmatalis and Pseudoplusia includens and also Piezodorus guildinii, Nezara viridula and Euschistus heros. For A. gemmatalis and P. includens control, the following insecticides were used: Baccilus thuringienses, Carbaryl, Clorpirifos, Decamethrin + S 339, Dimetoate, Endosulfan, Methyl Parathion, Monocrotophos and Triclorfon. For stink bugs, the

Populations of Rice Grain Bug, Paraeuscosmetus pallicomis, (Hemiptera: Lygaeidae) in Weed-free Paddy Field, Weedy Paddy Field and Paddy Dykes.

Science.gov (United States)

Abdullah, Tamrin; Nasruddin, Andi; Agus, Nurariaty

2017-07-01

Research on the populations of rice grain bug Paraeuscosmetus pallicomis Dallas (Hemiptera: Lygaeidae) in paddy field ecosystems was performed with the aim to determine the populations of rice grain bug in weed-free paddy field, weedy paddy field, and paddy dykes. Experiment was carried out in the village of Paccellekang in the district of Patallasang of Gowa Regency in South Sulawesi, Indonesia. Observations were performed during the milky grain stage (85 days after planting), the mature grain stage (105 days after planting), and one day after harvest (115 days after transplanting). Results showed that 85 days after the transplanting, the populations of rice grain bug was significantly higher in the weedy paddy field compared to weed-free field and paddy dykes with total numbers of 1.75, 3.53, and 0.31 insects per 2 hills, respectively. Similarly, 105 days after the transplanting, 2.53, 5.53, and 0.11 insects per hill, respectively. However, one day after the harvest (115 days after transplanting) the number of insects in weed-free field decreased, while in the dykes increased, and the weedy plot still had the highest number of insects per 2 hills. Our results suggested that weeds played an important role in regulating the bug population by providing alternative shelter and foods for the insect.

Granule size control and targeting in pulsed spray fluid bed granulation.

Science.gov (United States)

Ehlers, Henrik; Liu, Anchang; Räikkönen, Heikki; Hatara, Juha; Antikainen, Osmo; Airaksinen, Sari; Heinämäki, Jyrki; Lou, Honxiang; Yliruusi, Jouko

2009-07-30

The primary aim of the study was to investigate the effects of pulsed liquid feed on granule size. The secondary aim was to increase knowledge of this technique in granule size targeting. Pulsed liquid feed refers to the pump changing between on- and off-positions in sequences, called duty cycles. One duty cycle consists of one on- and off-period. The study was performed with a laboratory-scale top-spray fluid bed granulator with duty cycle length and atomization pressure as studied variables. The liquid feed rate, amount and inlet air temperature were constant. The granules were small, indicating that the powder has only undergone ordered mixing, nucleation and early growth. The effect of atomizing pressure on granule size depends on inlet air relative humidity, with premature binder evaporation as a reason. The duty cycle length was of critical importance to the end product attributes, by defining the extent of intermittent drying and rewetting. By varying only the duty cycle length, it was possible to control granule nucleation and growth, with a wider granule size target range in increased relative humidity. The present study confirms that pulsed liquid feed in fluid bed granulation is a useful tool in end product particle size targeting.

Avoiding Carbon Bed Hot Spots in Thermal Process Off-Gas Systems

International Nuclear Information System (INIS)

Soelberg, Nick; Enneking, Joe

2011-01-01

Mercury has had various uses in nuclear fuel reprocessing and other nuclear processes, and so is often present in radioactive and mixed (radioactive and hazardous) wastes. Test programs performed in recent years have shown that mercury in off-gas streams from processes that treat radioactive wastes can be controlled using fixed beds of activated sulfur-impregnated carbon, to levels low enough to comply with air emission regulations such as the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards. Carbon bed hot spots or fires have occurred several times during these tests, and also during a remediation of tanks that contained mixed waste. Hot spots occur when localized areas in a carbon bed become heated to temperatures where oxidation occurs. This heating typically occurs due to heat of absorption of gas species onto the carbon, but it can also be caused through external means such as external heaters used to heat the carbon bed vessel. Hot spots, if not promptly mitigated, can grow into bed fires. Carbon bed hot spots and fires must be avoided in processes that treat radioactive and mixed waste. Hot spots are detected by (a) monitoring in-bed and bed outlet gas temperatures, and (b) more important, monitoring of bed outlet gas CO concentrations. Hot spots are mitigated by (a) designing for appropriate in-bed gas velocity, for avoiding gas flow maldistribution, and for sufficient but not excessive bed depth, (b) appropriate monitoring and control of gas and bed temperatures and compositions, and (c) prompt implementation of corrective actions if bed hot spots are detected. Corrective actions must be implemented quickly if bed hot spots are detected, using a graded approach and sequence starting with corrective actions that are simple, quick, cause the least impact to the process, and are easiest to recover from.

Flue Gas Emissions from Fluidized Bed Combustion

NARCIS (Netherlands)

Bramer, E.A.; Valk, M.

1995-01-01

During the past decades fluidized bed coal combustion was developed as a technology for burning coal in an effective way meeting the standards for pollution control. During the earlier years of research on fluidized bed combustion, the potential for limiting the S02 emission by adding limestone to

Scale insects and mealy bugs (Homoptera: Coccoidea) attacking deciduous fruit trees in the western north coast of Alexandria, Egypt.

Science.gov (United States)

Mourad, A K; Moursi Khadiga, S; Mesbah, H A; Abdel-Razak Soad, I

2008-01-01

This investigation covered a survey of scale insects and mealy bugs infesting ten growing species of deciduous fruit trees in three localities in Alexandria govemorate. These localities were Merghem, Burg El-Arab, and El-Nahda about 50 Km. West of Alexandria under both rain-fed and irrigation system conditions. The common inspected fruit trees were fig, white mulberry, pomegranate, apple, pear, apricot, European plum, peach, almond, and persimmon. It was shown that a group of twenty scale insects and meaty bug species pertaining to fifteen genera belonging to six families of the super family: Coccoidea were collected and identified during the elapsing period from January to December, 2004. Among these species, Diaspidiotus perniciosus (Comstock) was recorded for the first time in Egypt. In the present study, many insect and non-insect parasitoids and predators were also found associated with these scale insects and mealy bugs on deciduous fruit trees in the three concerned localities throughout this investigation. These natural enemies were identified and recorded.

Plant growth stage-specific injury and economic injury level for verde plant bug, Creontiades signatus (Hemiptera: Miridae), on cotton: effect of bloom period of infestation.

Science.gov (United States)

Brewer, Michael J; Anderson, Darwin J; Armstrong, J Scott

2013-10-01

Verde plant bugs, Creontiades signatus Distant (Hemiptera: Miridae), were released onto caged cotton, Cossypium hirsutum L., for a 1-wk period to characterize the effects of insect density and bloom period of infestation on cotton injury and yield in 2011 and 2012, Corpus Christi, TX. When plants were infested during early bloom (10-11 nodes above first white flower), a linear decline in fruit retention and boll load and a linear increase in boll injury were detected as verde plant bug infestation levels increased from an average of 0.5 to 4 bugs per plant. Lint and seed yield per plant showed a corresponding decline. Fruit retention, boll load, and yield were not affected on plants infested 1 wk later at peak bloom (8-9 nodes above first white flower), even though boll injury increased as infestation levels increased. Second-year testing verified boll injury but not yield loss, when infestations occurred at peak bloom. Incidence of cotton boll rot, known to be associated with verde plant bug feeding, was low to modest (verde plant bug were important contributors to yield decline, damage potential was greatest during the early bloom period of infestation, and a simple linear response best described the yield response-insect density relationship at early bloom. Confirmation that cotton after peak bloom was less prone to verde plant bug injury and an early bloom-specific economic injury level were key findings that can improve integrated pest management decision-making for dryland cotton, at least under low-rainfall growing conditions.

On-line temperature control of fluidized bed incinerator using fuzzy algorithm; Fuzzu seigyo donyu ni yoru ryudosogata shokyakuro unten no jidoka

Energy Technology Data Exchange (ETDEWEB)

Okayasu, S.; Kuratani, T.; Imai, H. [Ajinomoto Co. Inc., Tokyo (Japan)

1995-03-15

Automatic control of incinerators for their stable operation has been desired for the preservation of the environment in the factory. An on-line fuzzy control system has been successfully introduced for temperature control of the fluidized bed of incinerator for industrial wastes. In this case, manual control can be applied to the plant instead of a PID control system, because of the complexity of the waste materials and the large delay in detection of the temperature change in the fluidized bed sand. On the basis of analyzing the dynamic performance of the process and the know-how of skilled operators, membership functions and fuzzy control rules are selected, then determined carefully for the system. Introduction of the system resulted in almost the same performance as manual control. Subsequently the operators are freed from manual operation in the control room for an hour. 6 refs., 5 figs., 4 tabs.

Use of bed nets and factors that influence bed net use among Jinuo Ethnic Minority in southern China.

Science.gov (United States)

Xu, Jian-wei; Liao, Yuan-mei; Liu, Hui; Nie, Ren-hua; Havumaki, Joshua

2014-01-01

Insecticide-treated nets (ITNs) are an integral part of vector control recommendations for malaria elimination in China. This study investigated the extent to which bed nets were used and which factors influence bed net use among Jinuo Ethnic Minority in China-Myanmar-Laos border areas. This study combined a quantitative household questionnaire survey and qualitative semi-structured in-depth interviews (SDI). Questionnaires were administered to 352 heads of households. SDIs were given to 20 key informants. The bed net to person ratio was 1∶2.1 (i.e., nearly one net for every two people), however only 169 (48.0%) households owned at least one net and 623 (47.2%) residents slept under bed nets the prior night. The percentages of residents who regularly slept under nets (RSUN) and slept under nets the prior night (SUNPN) were similar (48.0% vs. 47.2%, P>0.05), however the percentage correct use of nets (CUN) was significantly lower (34.5%, Pcash income per person (ACIP) was an independent factor that influenced bed net use (PHigh bed net availability does not necessarily mean higher coverage or bed net use. Household income, house type and knowledge of the ability of bed nets to prevent malaria are all independent factors that influence bed net use among Jinuo Ethnic Minority.

International Space Station Sustaining Engineering: A Ground-Based Test Bed for Evaluating Integrated Environmental Control and Life Support System and Internal Thermal Control System Flight Performance

Science.gov (United States)

Ray, Charles D.; Perry, Jay L.; Callahan, David M.

2000-01-01

As the International Space Station's (ISS) various habitable modules are placed in service on orbit, the need to provide for sustaining engineering becomes increasingly important to ensure the proper function of critical onboard systems. Chief among these are the Environmental Control and Life Support System (ECLSS) and the Internal Thermal Control System (ITCS). Without either, life onboard the ISS would prove difficult or nearly impossible. For this reason, a ground-based ECLSS/ITCS hardware performance simulation capability has been developed at NASA's Marshall Space Flight Center. The ECLSS/ITCS Sustaining Engineering Test Bed will be used to assist the ISS Program in resolving hardware anomalies and performing periodic performance assessments. The ISS flight configuration being simulated by the test bed is described as well as ongoing activities related to its preparation for supporting ISS Mission 5A. Growth options for the test facility are presented whereby the current facility may be upgraded to enhance its capability for supporting future station operation well beyond Mission 5A. Test bed capabilities for demonstrating technology improvements of ECLSS hardware are also described.

The HACMS program: using formal methods to eliminate exploitable bugs.

Science.gov (United States)

Fisher, Kathleen; Launchbury, John; Richards, Raymond

2017-10-13

For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA's HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles.This article is part of the themed issue 'Verified trustworthy software systems'. © 2017 The Authors.

The HACMS program: using formal methods to eliminate exploitable bugs

Science.gov (United States)

Launchbury, John; Richards, Raymond

2017-01-01

For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA’s HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles. This article is part of the themed issue ‘Verified trustworthy software systems’. PMID:28871050

Infant's bed climate and bedding in the Japanese home.

Science.gov (United States)

Nakamura Ikeda, Rie; Fukai, Kiyoko; Okamoto Mizuno, Kazue

2012-06-01

to assess the bed climate of infants in their homes in Japan. descriptive, exploratory, non-experimental research design. the data were collected at the participants' homes under normal circumstances. nineteen healthy infants between the ages of two and five months. Their mothers, who joined a parenting class organised by a maternity clinic in Okayama, Japan, consented to participate in this study. we visited the infants' homes and interviewed their mothers concerning the types and use of bedding. The temperature and relative humidity of the bed climate at the back and foot of the bedding, and in the room were measured every minute for four consecutive days. Differences among the bed climates measured during three seasons (spring, summer, and autumn) were assessed by one-way analysis of variance. The bed temperature was higher for infants than for adults. No significant difference in temperature was noted among the three seasons. The bed temperature was about 36.0°C when waterproof sheets and futon mattresses for children or adult were used. The average relative humidity of the bed climate at the back was highest in summer, followed by that in spring and autumn; the differences were significant. The use of waterproof sheets and futon mattresses for children in summer increased the relative humidity to 80% or more. The use of infant beds, sunoko drainboards, and cotton futon mattresses in summer was effective in reducing the bed humidity. these results suggest that nurse-midwives should advise the parents on comfortable bed climates for their infants, as well as how to select and use bedding for them. Copyright © 2010 Elsevier Ltd. All rights reserved.

Plated nickel wire mesh makes superior catalyst bed

Science.gov (United States)

Sill, M.

1965-01-01

Porous nickel mesh screen catalyst bed produces gas evolution in hydrogen peroxide thrust chambers used for attitude control of space vehicles. The nickel wire mesh disks in the catalyst bed are plated in rugose form with a silver-gold coating.

Biomechanics-based active control of bedding support properties and its influence on sleep.

Science.gov (United States)

Van Deun, D; Verhaert, V; Willemen, T; Wuyts, J; Verbraecken, J; Exadaktylos, V; Haex, B; Vander Sloten, J

2012-01-01

Proper body support plays an import role in the recuperation of our body during sleep. Therefore, this study uses an automatically adapting bedding system that optimises spinal alignment throughout the night by altering the stiffness of eight comfort zones. The aim is to investigate the influence of such a dynamic sleep environment on objective and subjective sleep parameters. The bedding system contains 165 sensors that measure mattress indentation. It also includes eight actuators that control the comfort zones. Based on the measured mattress indentation, body movements and posture changes are detected. Control of spinal alignment is established by fitting personalized human models in the measured indentation. A total of 11 normal sleepers participated in this study. Sleep experiments were performed in a sleep laboratory where subjects slept three nights: a first night for adaptation, a reference night and an active support night (in counterbalanced order). Polysomnographic measurements were recorded during the nights, combined with questionnaires aiming at assessing subjective information. Subjective information on sleep quality, daytime quality and perceived number of awakenings shows significant improvements during the active support (ACS) night. Objective results showed a trend towards increased slow wave sleep. On the other hand, it was noticed that % N1-sleep was significantly increased during ACS night, while % N2-sleep was significantly decreased. No prolonged N1 periods were found during or immediately after steering.

A transcriptome survey spanning life stages and sexes of the Harlequin bug, Murgantia histrionica

Science.gov (United States)

The harlequin bug, Murgantia histrionica (Hahn), is an agricultural pest in the continental United States, particularly in southern states. Reliable gene sequence data are especially useful to the development of species-specific, environmentally friendly molecular biopesticides and effective biolure...

Experimental study of improvement on combustion control of fluidized bed combustion chamber; Ryudosho shokyakuro no nenshosei no kaizen ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Izumiya, T.; Baba, K.; Koshida, H.; Uetani, J.; Furuta, M.

1998-10-29

Nippon Steel Corporation has carried out an experimental study using the Yawata waste incinerator plant in order to improve combustion control of a fluidized bed combustion chamber. For controlling the forming of dioxin, combustion control is very important in addition to conventional methods. In this paper, we report two studies about improvements on combustion control. In the first study, we verified improvement on combustion control by modifying gas flow at the freeboard. The operational results of the experiments were studied using the numerical model of the combustion chamber. The modification of gas flow at freeboard was confirmed to be effective to obtain a compact design of fluidized bed combustion chamber for municipal waste. In the second, study we improved combustion control for sewage combustion with municipal waste. In burning municipal waste and sewage, it is especially required to take combustion control into careful consideration. In this experiment, we developed a new device for supplying sewage for the appropriate controlling combustion, and verified its effectiveness to combustion control and an effective reduction of dioxin. (author)

No hospital is an island when it comes to Y2K bug

Science.gov (United States)

Silversides, A

1999-01-01

If a recent meeting on the millennium bug is any indication, Canada's health care facilities have plenty to worry about as the year 2,000 approaches. Topics discussed included the state of readiness within the health care sector and potential legal issues that may arise. PMID:9951449

The Impact of Test Case Summaries on Bug Fixing Performance : An Empirical Investigation

NARCIS (Netherlands)

Panichella, S.; Panichella, A.; Beller, M.; Zaidman, A.E.; Gall, H.

2015-01-01

Automated test generation tools have been widely investigated with the goal of reducing the cost of testing activities. However, generated tests have been shown not to help developers in detecting and finding more bugs even though they reach higher structural coverage compared to manual testing. The

The Impact of Test Case Summaries on Bug Fixing Performance : An Empirical Investigation

NARCIS (Netherlands)

Panichella, Sebastiano; Panichella, A.; Beller, M.M.; Zaidman, A.E.; Gall, Harald C.

2016-01-01

Automated test generation tools have been widely investigated with the goal of reducing the cost of testing activities. However, generated tests have been shown not to help developers in detecting and finding more bugs even though they reach higher structural coverage compared to manual testing.

EPA Regulation of Bed Bug Pesticides

Science.gov (United States)

All pesticides must be registered by EPA before being sold and used in the U.S., other than those that rely on a limited set of active ingredients (so-called minimum risk pesticides). EPA reviews for safety and effectiveness.

Bed Bugs: A Public Health Issue

Science.gov (United States)

Negative effects include allergic reactions to their bites, secondary infections from the bite reaction such as impetigo, and mental health impacts on people living in infested homes such as anxiety and insomnia.

Sublethal effects of diazinon, fenitrothion and chlorpyrifos on the functional response of predatory bug, Andrallus spinidens Fabricius (Hem.: Pentatomidae in the laboratory conditions

Directory of Open Access Journals (Sweden)

Moloud GholamzadehChitgar

2014-04-01

Full Text Available The sublethal effects of diazinon, fenitrothion and chlorpyrifos on the functional response of predatory bug, Andrallus spinidens Fabricius (Hem.: Pentatomidae, a potential biological control agent, were studied on 5th-instar nymphs. The experiment was conducted in varying densities (2, 4, 8, 16, 32 and 64 of last instars larvae of Chilo suppressalis Walker (Lepidoptera: Pyralidae as prey at 25 ± 2 °C, 60% ± 10% relative humidity (RH and a photoperiod of 16:8 h (L: D. The results of logistic regressions revealed a type II functional response in the control and all insecticide treatments. Comparison of functional response curves revealed that tested insecticides markedly decreased the mean of preys consumed by A. spinidens. Among them, functional response curve of A. spinidens in chlorpyrifos treatment was significantly lower than the other treatments. In this study, application of insecticides caused a decrease in the attack rate and an increase in the handling time of exposed bugs compared with the control. The longest handling time (3.97 ± 0.62 and the lowest attack rate (0.023 ± 0.007 were observed in chlorpyrifos and fenitrothion treatments, respectively. The results suggested that the adverse effect of these insecticides on A. spinidens should be considered in integrated pest management programs (IPM.

Dusky Cotton Bug Oxycarenus spp. (Hemiptera: Lygaeidae: Hibernating Sites and Management by using Plant Extracts under Laboratory Conditions

Directory of Open Access Journals (Sweden)

Abbas Muneer

2015-09-01

Full Text Available The dusky cotton bug, Oxycarenus spp., has now attained the status of a major pest of cotton crops that affects lint as well as the seed quality of cotton. Surveys were conducted to explore the hibernating sites in the districts Faisalabad, Multan and Bahawalpur. The efficacies of six different plant extracts, i.e. Neem (Azadirachta indica, Milkweed (Calotropis procera, Moringa (Moringa oleifera, Citrus (Citrus sinensis, Tobacco (Nicotiana tobacum and Castor (Ricinus communis were tested by using three different concentrations of each plant extract, i.e. 5, 2.5 and 1.5% under laboratory conditions at 25±2°C and 70±5% RH. The data were recorded 24, 48, 72 and 96 hours after treatment application. However, Psidium guajava, Azadirachta indica, Eucalyptus camaldulensis and Mangifera indica were graded as host plants heavily infested by Oxycarenus spp. Results (α≤0.05 indicated that increasing the concentration of extracts also increased the mortality. Nicotiana tobacum and Calotropis procera respectively displayed maximum 72 and 71, 84 and 80, 97 and 89% mortality at all concentrations, i.e. 1.25, 2.50 and 5.00%, after 96 hours of application. Two concentrations (2.5 and 5% are the most suitable for obtaining significant control of the dusky cotton bug.

Interaction between bedding and sleeping position in the sudden infant death syndrome: a population based case-control study.

Science.gov (United States)

Fleming, P J; Gilbert, R; Azaz, Y; Berry, P J; Rudd, P T; Stewart, A; Hall, E

1990-01-01

OBJECTIVE--To determine the relation between sleeping position and quantity of bedding and the risk of sudden unexpected infant death. DESIGN--A study of all infants dying suddenly and unexpectedly and of two controls matched for age and date with each index case. The parents of control infants were interviewed within 72 hours of the index infant's death. Information was collected on bedding, sleeping position, heating, and recent signs of illness for index and control infants. SETTING--A defined geographical area comprising most of the county of Avon and part of Somerset. SUBJECTS--72 Infants who had died suddenly and unexpectedly (of whom 67 had died from the sudden infant death syndrome) and 144 control infants. RESULTS--Compared with the control infants the infants who had died from the sudden infant death syndrome were more likely to have been sleeping prone (relative risk 8.8; 95% confidence interval 7.0 to 11.0; p less than 0.001), to have been more heavily wrapped (relative risk 1.14 per tog above 8 tog; 1.03 to 1.28; p less than 0.05), and to have had the heating on all night (relative risk 2.7; 1.4 to 5.2; p less than 0.01). These differences were less pronounced in the younger infants (less than 70 days) than the older ones. The risk of sudden unexpected death among infants older than 70 days, nursed prone, and with clothing and bedding of total thermal resistance greater than 10 tog was increased by factors of 15.1 (2.6 to 89.6) and 25.2 (3.7 to 169.0) respectively compared with the risk in infants of the same age nursed supine or on their side and under less than 6 tog of bedding. CONCLUSIONS--Overheating and the prone position are independently associated with an increased risk of sudden unexpected infant death, particularly in infants aged more than 70 days. Educating parents about appropriate thermal care and sleeping position of infants may help to reduce the incidence of the sudden infant death syndrome. PMID:2390588

Cladistics and biogeography of the assassin bug genus Rasahus Amyot & Serville (Heteroptera: Reduviidae: Peiratinae)

NARCIS (Netherlands)

Morrone, J.J.; Coscarón, M. del C.

1998-01-01

The assassin bug genus Rasahus Amyot & Serville (Heteroptera: Reduviidae: Peiratinae) comprises 26 Neotropical species. A cladistic analysis of the genus was carried out using 63 characters from external morphology, body vestiture, and male and female genitalia, with the species considered as

Bed Load Variability and Morphology of Gravel Bed Rivers Subject to Unsteady Flow: A Laboratory Investigation

Science.gov (United States)

Redolfi, M.; Bertoldi, W.; Tubino, M.; Welber, M.

2018-02-01

Measurement and estimation of bed load transport in gravel bed rivers are highly affected by its temporal fluctuations. Such variability is primarily driven by the flow regime but is also associated with a variety of inherent channel processes, such as flow turbulence, grain entrainment, and bed forms migration. These internal and external controls often act at comparable time scales, and are therefore difficult to disentangle, thus hindering the study of bed load variability under unsteady flow regime. In this paper, we report on laboratory experiments performed in a large, mobile bed flume where typical hydromorphological conditions of gravel bed rivers were reproduced. Data from a large number of replicated runs, including triangular and square-wave hydrographs, were used to build a statistically sound description of sediment transport processes. We found that the inherent variability of bed load flux strongly depends on the sampling interval, and it is significantly higher in complex, wandering or braided channels. This variability can be filtered out by computing the mean response over the experimental replicates, which allows us to highlight two distinctive phenomena: (i) an overshooting (undershooting) response of the mean bed load flux to a sudden increase (decrease) of discharge, and (ii) a clockwise hysteresis in the sediment rating curve. We then provide an interpretation of these findings through a conceptual mathematical model, showing how both phenomena are associated with a lagging morphological adaptation to unsteady flow. Overall, this work provides basic information for evaluating, monitoring, and managing gravel transport in morphologically active rivers.

Studies of gamma emitters in the alluvial deposit and in water of the Bug River

International Nuclear Information System (INIS)

Chibowski, S.; Pawlik, M.

1995-01-01

Studies of the contents of gamma emitters in samples of water and deposit taken from the Bug River (in Poland only) are presented. The total γ-activity of deposits ranges from 120-650 Bq/kg and the average value is 350 Bq/kg. The elevated activity is chiefly due to the presence of natural radionuclides. The main artificial radionuclides are Cs-137 and Cs-134, whose contribution to the total activity ranges from 0.2 to 6%. The activity of waters samples is low, namely, 1.7-3.5 Bq/kg and is due to the presence of natural radionuclides. The heterogeneity of the distribution of natural and artificial radionuclides in the studies samples reveals the effect of economical and industrial activities on contamination of the Bug. (author). 7 refs, 1 fig., 4 tabs

Development and Evaluation of a Wide-Bed Former for Vegetable Cultivation in Controlled Tractor Traffic

Science.gov (United States)

Dixit, Anoop; Khurana, Rohinish; Verma, Aseem; Singh, Arshdeep; Manes, G. S.

2018-05-01

India is the second largest producer of vegetables in the world. For vegetable cultivation, a good seed bed preparation is an important task which involves 6-10 different operations. To tackle the issue of multiple operations, a prototype of tractor operated wide bed former was developed and evaluated. The machine comprises of a rotary tiller and a bed forming setup. It forms bed of 1000 mm top width which is suitable as per the track width of an average sized tractor in India. The height of the beds formed is 130 mm whereas the top and bottom width of channel formed on both sides of the bed is 330 and 40 mm respectively at soil moisture content of 12.5-16% (db). The forward speed of 2.75 km/h was observed to be suitable for proper bed formation. The average fuel consumption of the machine was 5.9 l/h. The average bulk density of soil before and after the bed formation was 1.46 and 1.63 g/cc respectively. Field capacity of the machine was found to be 0.31 ha/h. The machine resulted in 93.8% labour saving and 80.4% saving in cost of bed preparation as compared to conventional farmer practice. Overall performance of wide-bed former was found to be satisfactory.

Morphometrics of the Southern Green Stink Bug [Nezara viridula (L.) (Hemiptera: Pentatomidae)] Stylet Bundle

Science.gov (United States)

The southern green stink bug, Nezara viridula (L.) (Hemiptera: Pentatomidae), is a cosmopolitan pest of high-value cash crops, including cotton (Gossypium hirsutum L.; Malvales: Malvaceae). The pest can ingest and transmit disease-causing bacterial and fungal pathogens of cotton. We hypothesized t...

Fooling the harlequin bug (Hemiptera: Pentatomidae) using synthetic volatiles to alter host plant choice

Science.gov (United States)

Harlequin bug, Murgantia histrionica (Hahn) (Hemiptera: Pentatomidae), is a widespread invasive pest that feeds on a variety of brassicaceous crops and other plants. To understand olfactory cues which mediate host-finding, and possible utility in pest management, we deployed aggregation pheromone (m...

Physiological and Functional Alterations after Spaceflight and Bed Rest.

Science.gov (United States)

Mulavara, Ajitkumar P; Peters, Brian T; Miller, Chris A; Kofman, Igor S; Reschke, Millard F; Taylor, Laura C; Lawrence, Emily L; Wood, Scott J; Laurie, Steven S; Lee, Stuart M C; Buxton, Roxanne E; May-Phillips, Tiffany R; Stenger, Michael B; Ploutz-Snyder, Lori L; Ryder, Jeffrey W; Feiveson, Alan H; Bloomberg, Jacob J

2018-04-03

Exposure to microgravity causes alterations in multiple physiological systems, potentially impacting the ability of astronauts to perform critical mission tasks. The goal of this study was to determine the effects of spaceflight on functional task performance and to identify the key physiological factors contributing to their deficits. A test battery comprised of 7 functional tests and 15 physiological measures was used to investigate the sensorimotor, cardiovascular and neuromuscular adaptations to spaceflight. Astronauts were tested before and after 6-month spaceflights. Subjects were also tested before and after 70 days of 6° head-down bed rest, a spaceflight analog, to examine the role of axial body unloading on the spaceflight results. These subjects included Control and Exercise groups to examine the effects of exercise during bed rest. Spaceflight subjects showed the greatest decrement in performance during functional tasks that required the greatest demand for dynamic control of postural equilibrium which was paralleled by similar decrements in sensorimotor tests that assessed postural and dynamic gait control. Other changes included reduced lower limb muscle performance and increased heart rate to maintain blood pressure. Exercise performed during bed rest prevented detrimental change in neuromuscular and cardiovascular function, however, both bed rest groups experienced functional and balance deficits similar to spaceflight subjects. Bed rest data indicates that body support unloading experienced during spaceflight contributes to postflight postural control dysfunction. Further, the bed rest results in the Exercise group of subjects confirm that resistance and aerobic exercises performed during spaceflight can play an integral role in maintaining neuromuscular and cardiovascular function, which can help in reducing decrements in functional performance. These results indicate that a countermeasure to mitigate postflight postural control dysfunction is

Bed agglomeration characteristics of palm shell and corncob combustion in fluidized bed

International Nuclear Information System (INIS)

Chaivatamaset, Pawin; Sricharoon, Panchan; Tia, Suvit

2011-01-01

Bed particle agglomeration was studied experimentally in an atmospheric laboratory scale fluidized bed combustor using quartz sand as bed material. Palm shell and corncob were tested. The objectives of the study were (i) to describe the contributions of the biomass ash properties and the operating conditions on the bed agglomeration tendency in term of the bed defluidization time (t def ) and the extent of potassium accumulation in the bed (K/Bed) and (ii) to further elucidate the ash inorganic behaviors and the governing bed agglomeration mechanisms. Defluidization caused by the bed agglomeration was experienced in all experiments during combustion of these biomasses, as a consequence of the presence of potassium in biomass. The experimental results indicated that biomass ash characteristics were the significant influence on the bed agglomeration. The increasing bed temperature, bed particle size and static bed height and the decreasing fluidizing air velocity enhanced the bed agglomeration tendency. The SEM/EDS analyses on the agglomerates confirmed that the agglomeration was attributed to the formation of potassium silicate liquid enriched on the surface of quartz sand particles in conjunction with the high surface temperature of the burning biomass char particles. Thermodynamic examination based on the phase diagram analysis confirmed that the molten phase formation was responsible for the agglomeration. In this study, the high molten ash fraction resulting from the high potassium content in biomass promoted the agglomeration and thus defluidization. - Highlights: → Palm shell and corncob of Thailand are tested their bed agglomeration behaviors during fluidized bed combustion. → The increase of bed temperature, bed particle size and static bed height and the decrease of air velocity enhance bed agglomeration. → The formation of ash derived potassium silicate melts enriched on sand surface is the key process. → The collision between char and sand

Development of a Quadrotor Test Bed — Modelling, Parameter Identification, Controller Design and Trajectory Generation

Directory of Open Access Journals (Sweden)

Wei Dong

2015-02-01

Full Text Available In this paper, a quadrotor test bed is developed. The technical approach for this test bed is firstly proposed by utilizing a commercial quadrotor, a Vicon motion capture system and a ground station. Then, the mathematical model of the quadrotor is formulated considering aerodynamic effects, and the parameter identification approaches for this model are provided accordingly. Based on the developed model and identified parameters, a simulation environment that is consistent with the real system is developed. Subsequently, a flight control strategy and a trajectory generation method, both of which are conceptually and computationally lightweight, are developed and tested in the simulation environment. The developed algorithms are then directly transplanted to the real system, and the experimental results show that their responses in the real-time flights match well with those from the simulations. This indicates that the control algorithms developed for the quadrotor can be preliminarily verified and refined though simulations, and then directly implemented to the real system, which could significantly reduce the experimental risks and costs. Meanwhile, real-time experiments show that the developed flight controller can efficiently stabilize the quadrotor when external disturbances exist, and the trajectory generation approach can provide safe guidance for the quadrotor to fly smoothly through cluttered environments with obstacle rings. All of these features are valuable for real applications, thus demonstrating the feasibility of further development.

Evidence of environmental and vertical transmission of Burkholderia symbionts in the oriental chinch bug, Cavelerius saccharivorus (Heteroptera: Blissidae).

Science.gov (United States)

Itoh, Hideomi; Aita, Manabu; Nagayama, Atsushi; Meng, Xian-Ying; Kamagata, Yoichi; Navarro, Ronald; Hori, Tomoyuki; Ohgiya, Satoru; Kikuchi, Yoshitomo

2014-10-01

The vertical transmission of symbiotic microorganisms is omnipresent in insects, while the evolutionary process remains totally unclear. The oriental chinch bug, Cavelerius saccharivorus (Heteroptera: Blissidae), is a serious sugarcane pest, in which symbiotic bacteria densely populate the lumen of the numerous tubule-like midgut crypts that the chinch bug develops. Cloning and sequence analyses of the 16S rRNA genes revealed that the crypts were dominated by a specific group of bacteria belonging to the genus Burkholderia of the Betaproteobacteria. The Burkholderia sequences were distributed into three distinct clades: the Burkholderia cepacia complex (BCC), the plant-associated beneficial and environmental (PBE) group, and the stinkbug-associated beneficial and environmental group (SBE). Diagnostic PCR revealed that only one of the three groups of Burkholderia was present in ∼89% of the chinch bug field populations tested, while infections with multiple Burkholderia groups within one insect were observed in only ∼10%. Deep sequencing of the 16S rRNA gene confirmed that the Burkholderia bacteria specifically colonized the crypts and were dominated by one of three Burkholderia groups. The lack of phylogenetic congruence between the symbiont and the host population strongly suggested host-symbiont promiscuity, which is probably caused by environmental acquisition of the symbionts by some hosts. Meanwhile, inspections of eggs and hatchlings by diagnostic PCR and egg surface sterilization demonstrated that almost 30% of the hatchlings vertically acquire symbiotic Burkholderia via symbiont-contaminated egg surfaces. The mixed strategy of symbiont transmission found in the oriental chinch bug might be an intermediate stage in evolution from environmental acquisition to strict vertical transmission in insects. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Development and application of an actively controlled hybrid proton exchange membrane fuel cell - Lithium-ion battery laboratory test-bed based on off-the-shelf components

Energy Technology Data Exchange (ETDEWEB)

Yufit, V.; Brandon, N.P. [Dept. Earth Science and Engineering, Imperial College, London SW7 2AZ (United Kingdom)

2011-01-15

The use of commercially available components enables rapid prototyping and assembling of laboratory scale hybrid test-bed systems, which can be used to evaluate new hybrid configurations. The development of such a test-bed using an off-the-shelf PEM fuel cell, lithium-ion battery and DC/DC converter is presented here, and its application to a hybrid configuration appropriate for an unmanned underwater vehicle is explored. A control algorithm was implemented to regulate the power share between the fuel cell and the battery with a graphical interface to control, record and analyze the electrochemical and thermal parameters of the system. The results demonstrate the applicability of the test-bed and control algorithm for this application, and provide data on the dynamic electrical and thermal behaviour of the hybrid system. (author)

Cold acclimation increases cold tolerance independently of diapause programing in the bean bug, Riptortus pedestris.

Science.gov (United States)

Rozsypal, J; Moos, M; Goto, S G

2017-10-17

The bean bug (Riptortus pedestris) is a pest of soybeans and other legumes in Japan and other Asian countries. It enters a facultative adult diapause on exposure to short days. While photoperiodism and diapause are well understood in R. pedestris, knowledge of cold tolerance is very limited, as is information on the effect of diapause on cold tolerance. We examined the effect of photoperiod, cold acclimation, and feeding status on cold tolerance in R. pedestris. We found that cold acclimation significantly increased survival at -10°C in both long- and short-day adult R. pedestris. Since the difference in cold survival between long- and short-day cold-acclimated groups was only marginal, we conclude that entering diapause is not crucial for R. pedestris to successfully pass through cold acclimation and become cold tolerant. We observed similar effects in 5th instar nymphs, with both long- and short-day cold-acclimated groups surviving longer cold exposures compared with non-acclimated groups. Starvation, which was tested only in adult bugs, had only a negligible and negative impact on cold survival. Although cold tolerance significantly increased with cold acclimation in adult bugs, supercooling capacity unexpectedly decreased. Our results suggest that changes in supercooling capacity as well as in water content are unrelated to cold tolerance in R. pedestris. An analysis of metabolites revealed differences between the treatments, and while several metabolites markedly increased with cold acclimation, their concentrations were too low to have a significant effect on cold tolerance.

Biochemical characterisation of the tissue degrading enzyme, collagenase, in the spined soldier bug, Podisus maculiventris (Hemiptera: Pentatomidae

Directory of Open Access Journals (Sweden)

Ghamari Mahboob

2014-07-01

Full Text Available Podisus maculiventris (Say is a generalist predator attacking many insect species from different orders. The bug injects saliva into its prey's body. The ingested hemolymph and liquefied internal tissues pass through the bug's alimentary tract. Collagenase working on peptide bonds of collagen and basement membrane proteins, leads to the disintegration of the prey's internal organs. As yet, there is an almost complete lack of knowledge on the collagenase activity in P. maculiventris. The collagenase activity of the salivary glands and midgut was optimum at pH 8.0 which was congruent with the optimal pH of the total proteolytic activity of the salivary glands. More collagenolytic activity was determined in the posterior lobe of the salivary glands and anterior midgut. Significant inhibition of collagenolytic activity by ethylenediaminetetraacetic acid (EDTA revealed the enzyme is a metalloproteinase. The collagenase activity notably decreased when the bug went hungry. The salivary gland collagenase is a vital enzyme in extra-oral digestion and facilitates the action of other digestive enzymes. The midgut collagenase may be involved in the digestion of the ingested muscle fibers. The collagenase probably acts as an intoxicating agent in the saliva (venom of P. maculiventris. Paralysing toxins are present in the salivary gland secretion.

Design Of Fluidized-bed Incinerator

International Nuclear Information System (INIS)

Lee, Bong Hun

1992-04-01

This book tells of design of fluidized-bed incinerator, which includes outline of fluidized-bed incinerator such as definition, characteristic, structure of principle of incineration and summary of the system, facilities of incinerator with classification of incinerator apparatus of supply of air, combustion characteristic, burnup control and point of design of incinerator, preconditioning facilities on purpose, types and characteristic of that system, a crusher, point of design of preconditioning facilities, rapid progress equipment, ventilation equipment, chimney facilities, flue gas cooling facilities boiler equipment, and removal facility of HCI/SOX and NOX.

A case of extensive congregation of Man-faced Stink Bug Catacanthus incarnatus (Drury (Hemiptera: Pentatomidae together with new host records from western Maharashtra, India

Directory of Open Access Journals (Sweden)

S.H. Waghmare

2015-06-01

Full Text Available A study was conducted on the congregation of Stink Bug Catacanthus incarnatus. For the first time this bug was reported at high altitude i.e., 792m. The study reports the congregation of C. incarnatus on four new host plant species viz., Ixora brachiata, Memecylon umbellatum, Glochidion ellipticum and Olea dioica. More infestation was observed on I. brachiata. 

Method of online cleanliness control for upward-facing transport mirrors in integration test bed

International Nuclear Information System (INIS)

Zhao Longbiao; Qin Lang; Zhou Guorui; Ye Yayun; Zhang Chuanchao; Miao Xinxiang; Wang Hongbin; Yuan Xiaodong; Wang Xiaohong; Cheng Xiaofeng

2013-01-01

An online cleanliness control method based on the online monitoring system was developed for controlling the particle pollution and damage of upward-facing transport mirrors in the integration test bed. By building up gas knife system, the online cleanliness processing was effectively achieved for the particle pollution on the mirror surface. By using the gas screen, the cleanliness of the mirror surface was effectively online maintained. The image processing system was applied to assessing the effect of online cleanliness processing. The experimental results indicate that the particle pollution was reduced by the gas knife and the gas screen was useful to avoid the settlement of particle pollution. (authors)

Study on heat and mass transfer between a greenhouse considered as a solar air heater and a rock packed bed as ambient control system

International Nuclear Information System (INIS)

Ajona Maeztu, J.I.

1990-01-01

A general study on heat transfer in dry packed beds is made, with special emphasis in comparing different transient models and in identifying the required conditions by which the attained results are equivalent. The differences in thermal behaviour on packed beds, when simultaneous heat mass transfer occurs as wet air is used as heat transfer fluid and exchanges heat and water with the solid in the bed, is analyzed. We modelize wet packed beds considering them as one dimension adsorbents beds, with dispersive and non-dispersive models, where adsorption, condensation-evaporation and liquid water downward flow from condensate phenomena are present. Models were solved numerically and experiments with a rock bed with dry and wet air through it, were made to test assumptions and to further understand the behavior of the system, obtaining a pretty good agreement between expected and measured profiles of the temperature evolution within the packed bed. As a possible application of the wet rock bed for storage purposes, a forced ventilation greenhouse was characterized as a wet air solar heater and analyzed the energetic potential of storing the heat that has to be rejected during daytime to control the crop ambient conditions, in a rock bed for later use at night for heating. (author)

The Safety of Hospital Beds: Ingress, Egress, and In-Bed Mobility.

Science.gov (United States)

Morse, Janice M; Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K; Bloswick, Donald

2015-01-01

To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients' ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients' use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated.

Design of fluidized-bed, biological denitrification systems

International Nuclear Information System (INIS)

Patton, B.D.; Hancher, C.W.; Pitt, W.W.; Walker, J.F.

1982-01-01

Many commercial processes yield nitrate-containing wastewaters that are being discharged to the environment because traditional recovery or disposal methods are economically unacceptable. The anticipated discharge limits (i.e., 10 to 20 g (NO 3 - )/m 3 ) being considered by many states will not allow continued release of these wastewaters. The new discharge standards can be met economically by use of the fluidizied-bed, biological denitrification process. Research and development studies were conducted with 0.05-, 0.10-, 0.20-, and 0.50-m-diam fluidized-bed bioreactor systems. Feed nitrate concentrations were in the 0 to 10,000 g (NO 3 - )/m 3 range. Using the data from these studies, rate expressions were developed for the destruction of nitrate as a function of nitrate concentration. Methods were also developed for sizing bioreactors and biomass control systems. The sizing methods for fluidized-bed denitrification systems are described, and support systems such as sampling and analysis, instrumentation and controls, utilities, and bacteria storage are discussed. Operation of the process is also briefly discussed to aid the designer. Using the methods presented in this report, fluidized-bed, biological denitrification systems can be designed to treat nitrate wastewater streams

Wound bed preparation for ischemic diabetic foot ulcer.

Science.gov (United States)

Zhang, Zhaoxin; Lv, Lei; Guan, Sheng

2015-01-01

This study is to evaluate the effect of allograft skin on wound angiogenesis and wound bed preparation of ischemic diabetic foot ulcer. A total of 60 cases of patients with diabetic foot ulcer were randomly divided into the experimental group (n = 30) and the control group (n = 30). After debridement, in the experimental group, allograft skin was used to cover the wound while in the control group, vaseline and gauze was used to cover the wound. The wound was opened and dressed at 3, 5, 7, 14 days after operation and the growth condition of the granulation tissue was observed and recorded. The wound bed preparation time of the experimental group was 14.37 ± 1.06 days, compared with the control group 25.99 ± 4.03 days, there was statistically significant difference (t = 14.78, P cure time of the experimental group was 32 ± 1.93 days and this time was significantly shortened than the control group 39.73 ± 2.55 days (t = 12.521, P ulcer and shorten the wound bed preparation time and treatment cycle.

Fluidized bed volume reduction of diverse radwastes

International Nuclear Information System (INIS)

McFee, J.N.; McConnell, J.W.; Waddoups, D.A.; Gray, M.F.; Harwood, L.E.; Clayton, N.J.; Drown, D.C.

1981-01-01

Method and apparatus for a fluidized bed radwaste volume reduction system are claimed. Low level radioactive wastes, combustible solids, ion exchange resins and filter sludges, and liquids, emanating from a reactor facility are introduced separately through an integrated waste influent system into a common fluidized bed vessel where volume reduction either through incineration or calcination occurs. Addition of a substance to the ion exchange resin before incineration inhibits the formation of low-melting point materials which tend to form clinkers in the bed. Solid particles are scrubbed or otherwise removed from the gaseous effluent of the vessel in an off-gas system, before the cooled and cleaned off-gas is released to the atmosphere. Iodine is chemically or physically removed from the off-gas. Otherwise, the only egress materials from the volume reduction system are containerized dry solids and tramp material. The bed material used during each mode may be circulated, cleaned, stored and exchanged from within the bed vessel by use of a bed material handling system. An instrumentation and control system provides operator information, monitors performance characteristics, implements start up and shut down procedures, and initiates alarms and emergency procedures during abnormal conditions

Uncovering Bugs in Distributed Storage Systems during Testing (not in Production!)

OpenAIRE

Deligiannis, P; McCutchen, M; Thomson, P; Chen, S; Donaldson, AF; Erickson, J; Huang, C; Lal, A; Mudduluru, R; Qadeer, S; Schulte, W

2016-01-01

Testing distributed systems is challenging due to multiple sources of nondeterminism. Conventional testing techniques, such as unit, integration and stress testing, are ineffective in preventing serious but subtle bugs from reaching production. Formal techniques, such as TLA+, can only verify high-level specifications of systems at the level of logic-based models, and fall short of checking the actual executable code. In this paper, we present a new methodology for testing distributed systems...

BedMachine v3: Complete Bed Topography and Ocean Bathymetry Mapping of Greenland From Multibeam Echo Sounding Combined With Mass Conservation

DEFF Research Database (Denmark)

Morlighem, M.; Williams, C. N.; Rignot, E.

2017-01-01

Greenland's bed topography is a primary control on ice flow, grounding line migration, calving dynamics, and subglacial drainage. Moreover, fjord bathymetry regulates the penetration of warm Atlantic water (AW) that rapidly melts and undercuts Greenland's marine‐terminating glaciers. Here we...... present a new compilation of Greenland bed topography that assimilates seafloor bathymetry and ice thickness data through a mass conservation approach. A new 150 m horizontal resolution bed topography/bathymetric map of Greenland is constructed with seamless transitions at the ice/ocean interface...

7 CFR 2902.15 - Bedding, bed linens, and towels.

Science.gov (United States)

2010-01-01

... PROCUREMENT Designated Items § 2902.15 Bedding, bed linens, and towels. (a) Definition. (1) Bedding is that... minimum biobased content is 12 percent and shall be based on the amount of qualifying biobased carbon in..., and silk are not qualifying biobased feedstocks for the purpose of determining the biobased content of...

Characterization of Halyomorpha halys (brown marmorated stink bug) biogenic volatile organic compound emissions and their role in secondary organic aerosol formation.

Science.gov (United States)

Solomon, Danielle; Dutcher, Dabrina; Raymond, Timothy

2013-11-01

The formation of aerosols is a key component in understanding cloud formation in the context of radiative forcings and global climate modeling. Biogenic volatile organic compounds (BVOCs) are a significant source of aerosols, yet there is still much to be learned about their structures, sources, and interactions. The aims of this project were to identify the BVOCs found in the defense chemicals of the brown marmorated stink bug Halymorpha halys and quantify them using gas chromatography-mass spectrometry (GC/MS) and test whether oxidation of these compounds by ozone-promoted aerosol and cloud seed formation. The bugs were tested under two conditions: agitation by asphyxiation and direct glandular exposure. Tridecane, 2(5H)-furanone 5-ethyl, and (E)-2-decenal were identified as the three most abundant compounds. H. halys were also tested in the agitated condition in a smog chamber. It was found that in the presence of 100-180 ppm ozone, secondary aerosols do form. A scanning mobility particle sizer (SMPS) and a cloud condensation nuclei counter (CCNC) were used to characterize the secondary aerosols that formed. This reaction resulted in 0.23 microg/ bug of particulate mass. It was also found that these secondary organic aerosol particles could act as cloud condensation nuclei. At a supersaturation of 1%, we found a kappa value of 0.09. Once regional populations of these stink bugs stablilize and the populations estimates can be made, the additional impacts of their contribution to regional air quality can be calculated.

Doing bayesian data analysis a tutorial with R and BUGS

CERN Document Server

Kruschke, John K

2011-01-01

There is an explosion of interest in Bayesian statistics, primarily because recently created computational methods have finally made Bayesian analysis obtainable to a wide audience. Doing Bayesian Data Analysis, A Tutorial Introduction with R and BUGS provides an accessible approach to Bayesian data analysis, as material is explained clearly with concrete examples. The book begins with the basics, including essential concepts of probability and random sampling, and gradually progresses to advanced hierarchical modeling methods for realistic data. The text delivers comprehensive coverage of all

Evaluation of a clay-based acidic bedding conditioner for dairy cattle bedding.

Science.gov (United States)

Proietto, R L; Hinckley, L S; Fox, L K; Andrew, S M

2013-02-01

This study investigated the effects of a clay-based acidic bedding conditioner on sawdust bedding pH, dry matter (DM), environmental pathogen counts, and environmental bacterial counts on teat ends of lactating dairy cows. Sixteen lactating Holstein cows were paired based on parity, days in milk, milk yield, and milk somatic cell count, and were negative for the presence of an intramammary pathogen. Within each pair, cows were randomly assigned to 1 of 2 treatments with 3-wk periods in a crossover design. Treatment groups consisted of 9 freestalls per group bedded with either untreated sawdust or sawdust with a clay-based acidic bedding conditioner, added at 3- to 4-d intervals over each 21-d period. Bedding and teat ends were aseptically sampled on d 0, 1, 2, 7, 14, and 21 for determination of environmental bacterial counts. At the same time points, bedding was sampled for DM and pH determination. The bacteria identified in the bedding material were total gram-negative bacteria, Streptococcus spp., and coliform bacteria. The bacteria identified on the teat ends were Streptococcus spp., coliform bacteria, and Klebsiella spp. Teat end score, milk somatic cell count, and intramammary pathogen presence were measured weekly. Bedding and teat cleanliness, environmental high and low temperatures, and dew point data were collected daily. The bedding conditioner reduced the pH, but not the DM, of the sawdust bedding compared with untreated sawdust. Overall environmental bacterial counts in bedding were lower for treated sawdust. Total bacterial counts in bedding and on teat ends increased with time over both periods. Compared with untreated sawdust, the treated bedding had lower counts of total gram-negative bacteria and streptococci, but not coliform counts. Teat end bacterial counts were lower for cows bedded on treated sawdust for streptococci, coliforms, and Klebsiella spp. compared with cows bedded on untreated sawdust. The clay-based acidic bedding conditioner

The Effects of Dinner-to-Bed Time and Post-Dinner Walk on Gastric Cancer Across Different Age Groups: A Multicenter Case-Control Study in Southeast China.

Science.gov (United States)

Xu, Le; Zhang, Xi; Lu, Jun; Dai, Jia-Xi; Lin, Ren-Qin; Tian, Fang-Xi; Liang, Bing; Guo, Yi-Nan; Luo, Hui-Yu; Li, Ni; Fang, Dong-Ping; Zhao, Ruo-Hua; Huang, Chang-Ming

2016-04-01

Gastric cancer (GC) remains a major killer throughout the world. Despite the dramatic decrease in GC over the last century, its etiology has not yet been well characterized. This study investigated the possible independent and combined effects of the dinner-to-bed time and post-dinner walk on the risk for GC across different age groups. A population-based, case-control study was conducted in southeast China, including 452 patients with GC and 465 age-, race-, and gender-matched controls. A self-designed questionnaire was used to collect information on demographic characteristics, dinner-to-bed time, post-dinner walk, and other behavioral factors. Conditional logistic regression models were used to estimate the effects of the dinner-to-bed time and post-dinner walk as well as their joint effect on the risk for GC across different age groups. Individuals with dinner-to-bed time 55 years old.

Distinct properties of proteases and nucleases in the gut, salivary gland and saliva of southern green stink bug, Nezara viridula

Science.gov (United States)

Lomate, Purushottam R.; Bonning, Bryony C.

2016-01-01

Stink bugs negatively impact numerous plant species of agricultural and horticultural importance. While efforts to develop effective control measures are underway, the unique digestive physiology of these pests presents a significant hurdle for either protein- or nucleotide-based management options. Here we report the comparative biochemical and proteomic characterization of proteases and nucleases from the gut, salivary gland and saliva of the southern green stink bug, Nezara viridula. The pH optimum for protease activity was acidic (5 to 6) in the gut with the primary proteases being cysteine proteases, and alkaline (8 to 9) in the saliva and salivary gland with the primary proteases being serine proteases. The serine proteases in saliva differ biochemically from trypsin and chymotrypsin, and the cathepsins in the gut and saliva showed distinct properties in inhibitor assays. Nuclease activity (DNase, RNase, dsRNase) was concentrated in the salivary gland and saliva with negligible activity in the gut. The most abundant proteins of the gut (530) and salivary gland (631) identified by proteomic analysis included four gut proteases along with eight proteases and one nuclease from the salivary gland. Understanding of N. viridula digestive physiology will facilitate the design of new strategies for management of this significant pest. PMID:27282882

The mechanism of char ignition in fluidized bed combustors

NARCIS (Netherlands)

Siemons, R.V.

1987-01-01

Knowledge about ignition processes of coal in fluidized beds is of importance for the start-up and dynamic control of these combustors. Initial experiments in a transparent fluidized bed scale model showed the existence of a considerable induction period for the ignition of char, especially at low

75 FR 858 - Propoxur; Receipt of Application for Emergency Exemption; Solicitation of Public Comment

Science.gov (United States)

2010-01-06

... activity against bed bugs and would provide an effective insecticide in a different chemical class for bed... use of a pesticide which was voluntarily canceled under section 6(f) of the Federal Insecticide... section 18 of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) (7 U.S.C. 136p), at the...

Cardiac atrophy after bed rest and spaceflight

Science.gov (United States)

Perhonen, M. A.; Franco, F.; Lane, L. D.; Buckey, J. C.; Blomqvist, C. G.; Zerwekh, J. E.; Peshock, R. M.; Weatherall, P. T.; Levine, B. D.

2001-01-01

Cardiac muscle adapts well to changes in loading conditions. For example, left ventricular (LV) hypertrophy may be induced physiologically (via exercise training) or pathologically (via hypertension or valvular heart disease). If hypertension is treated, LV hypertrophy regresses, suggesting a sensitivity to LV work. However, whether physical inactivity in nonathletic populations causes adaptive changes in LV mass or even frank atrophy is not clear. We exposed previously sedentary men to 6 (n = 5) and 12 (n = 3) wk of horizontal bed rest. LV and right ventricular (RV) mass and end-diastolic volume were measured using cine magnetic resonance imaging (MRI) at 2, 6, and 12 wk of bed rest; five healthy men were also studied before and after at least 6 wk of routine daily activities as controls. In addition, four astronauts were exposed to the complete elimination of hydrostatic gradients during a spaceflight of 10 days. During bed rest, LV mass decreased by 8.0 +/- 2.2% (P = 0.005) after 6 wk with an additional atrophy of 7.6 +/- 2.3% in the subjects who remained in bed for 12 wk; there was no change in LV mass for the control subjects (153.0 +/- 12.2 vs. 153.4 +/- 12.1 g, P = 0.81). Mean wall thickness decreased (4 +/- 2.5%, P = 0.01) after 6 wk of bed rest associated with the decrease in LV mass, suggesting a physiological remodeling with respect to altered load. LV end-diastolic volume decreased by 14 +/- 1.7% (P = 0.002) after 2 wk of bed rest and changed minimally thereafter. After 6 wk of bed rest, RV free wall mass decreased by 10 +/- 2.7% (P = 0.06) and RV end-diastolic volume by 16 +/- 7.9% (P = 0.06). After spaceflight, LV mass decreased by 12 +/- 6.9% (P = 0.07). In conclusion, cardiac atrophy occurs during prolonged (6 wk) horizontal bed rest and may also occur after short-term spaceflight. We suggest that cardiac atrophy is due to a physiological adaptation to reduced myocardial load and work in real or simulated microgravity and demonstrates the plasticity

Estimating potential stylet penetration of southern green stink bug (Hemiptera: Pentatomidae) - A mathematical modeling approach

Science.gov (United States)

Southern green stink bugs, Nezara viridula (L.), and related species are significant pests of cotton in the U.S. Cotton Belt. Using their stylets, adults introduce disease pathogens of cotton into cotton bolls, and preliminary data indicates nymphs can also ingest these pathogens. Data is lacking ...

Overview and evolution of the LeRC PMAD DC test bed

Science.gov (United States)

Soeder, James F.; Frye, Robert J.

1992-01-01

Since the beginning of the Space Station Freedom Program (SSFP), the Lewis Research Center (LeRC) has been developed electrical power system test beds to support the overall design effort. Through this time, the SSFP has changed the design baseline numerous times, however, the test bed effort has endeavored to track these changes. Beginning in August 1989 with the baseline and an all DC system, a test bed was developed to support the design baseline. The LeRC power measurement and distribution (PMAD) DC test bed and the changes in the restructure are described. The changes included the size reduction of primary power channel and various power processing elements. A substantial reduction was also made in the amount of flight software with the subsequent migration of these functions to ground control centers. The impact of these changes on the design of the power hardware, the controller algorithms, the control software, and a description of their current status is presented. An overview of the testing using the test bed is described, which includes investigation of stability and source impedance, primary and secondary fault protection, and performance of a rotary utility transfer device. Finally, information is presented on the evolution of the test bed to support the verification and operational phases of the SSFP in light of these restructure scrubs.

Short communication: Dairy bedding type affects survival of Prototheca in vitro.

Science.gov (United States)

Adhikari, N; Bonaiuto, H E; Lichtenwalner, A B

2013-01-01

Protothecae are algal pathogens, capable of causing bovine mastitis, that are unresponsive to treatment; they are believed to have an environmental reservoir. The role of bedding management in control of protothecal mastitis has not been studied. The purpose of this study was to evaluate the growth of either environmental or mastitis-associated Prototheca genotypes in dairy bedding materials that are commonly used in Maine. Prototheca zopfii genotypes 1 and 2 (gt1 and gt2) were inoculated into sterile broth only (control ), kiln-dried spruce shavings, "green" hemlock sawdust, sand, or processed manure-pack beddings with broth, and incubated for 2 d. Fifty microliters of each isolate was then cultured onto plates and the resulting colonies counted at 24 and 48 h postinoculation. Shavings were associated with significantly less total Prototheca growth than other bedding types. Growth of P. zopfii gt1 was significantly higher than that of gt2 in the manure-pack bedding material. Spruce shavings, compared with manure, sand, or sawdust, may be a good bedding type to prevent growth of Prototheca. Based on these in vitro findings, bedding type may affect Prototheca infection of cattle in vivo. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Solid diffusion control of the adsorption of basic dyes onto granular activated carbon and natural zeolite in fixed bed columns

Directory of Open Access Journals (Sweden)

M. MARINKOVSKI

2001-07-01

Full Text Available The adsorption of basic dyes from aqueous solutions onto granular activated carbon and natural zeolite was studied using a fixed bed column. The design procedures for fixed bed adsorption columns were investigated for two basic dyes Maxilon Goldgelb GL EC 400 % (MG-400 and Maxilon Schwarz FBL-01 300 % (MS-300. A computer program based on the solid diffusion control model has been developed. The model parameters: solid diffusion coefficient, DS, axial dispersion coefficient, DL and external mass transfer coefficient, kf for all the investigated systems were estimated by means of a best fit approach.

ADVANCES IN CLOG STATE MONITORING FOR USE IN AUTOMATED REED BED INSTALLATIONS

Directory of Open Access Journals (Sweden)

Theodore HUGHES-RILEY

2014-06-01

Full Text Available Constructed wetlands are a popular form of waste-water treatment that have proliferated across Europe and the rest of the world in recent years as an environmentally conscious form of waste water treatment. The ability to monitor the conditions in the bed and control input factors such as heating and aeration may extend the lifetime of the reed bed substantially beyond the ten year lifetime normally reached. The Autonomous Reed Bed Installation (ARBI project is an EU FP7 initiative to develop a reed bed with automated control over input parameters based on readings taken from embedded sensors. Automated remedial action may improve bed treatment efficiency, and prolong the life of the bed and avoiding the need to refurbish the bed, which is both time consuming and costly. One critical parameter to observe is the clog state of the reed bed, as this can severely impact on the efficiency of water treatment to the point of the bed becoming non-operable. Magnetic resonance (MR sensors can be a powerful tool in determining clogging levels, and has previously been explored in the literature. This work is based on a conference paper (2nd International Conference "Water resources and wetlands", 2014 and details magnetic sensors suitable for long-term embedding into a constructed wetland. Unlike previous studies this work examines a probe embedded into a wetland.

An insight into the sialotranscriptome of the seed-feeding bug, Oncopeltus fasciatus

OpenAIRE

Francischetti, Ivo M.B.; Lopes, Angela H.; Dias, Felipe A.; Pham, Van M.; Ribeiro, José M.C.

2007-01-01

The salivary transcriptome of the seed-feeding hemipteran, Oncopeltus fasciatus (milkweed bug), is described following assembly of 1,025 ESTs into 305 clusters of related sequences. Inspection of these sequences reveals abundance of low complexity, putative secreted products rich in the amino acids (aa) glycine, serine or threonine, which might function as silk or mucins and assist food canal lubrication and sealing of the feeding site around the mouthparts. Several protease inhibitors were f...

Tracking channel bed resiliency in forested mountain catchments using high temporal resolution channel bed movement

Science.gov (United States)

Martin, Sarah E.; Conklin, Martha H.

2018-01-01

This study uses continuous-recording load cell pressure sensors in four, high-elevation (1500-1800 m), Sierra Nevada headwater streams to collect high-temporal-resolution, bedload-movement data for investigating the channel bed movement patterns within these streams for water years 2012-2014. Data show an annual pattern where channel bed material in the thalweg starts to build up in early fall, peaks around peak snow melt, and scours back to baseline levels during hydrograph drawdown and base flow. This pattern is punctuated by disturbance and recovery of channel bed material associated with short-term storm events. A conceptual model, linking sediment sources at the channel margins to patterns of channel bed fill and scour in the thalweg, is proposed building on the results of Martin et al. (2014). The material in the thalweg represents a balance between sediment supply from the channel margins and sporadic, conveyor-belt-like downstream transport in the thalweg. The conceptual model highlights not only the importance of production and transport rates but also that seasonal connectedness between the margins and thalweg is a key sediment control, determining the accumulation rate of sediment stores at the margins and the redistribution of sediment from margins to thalweg that feeds the conveyor belt. Disturbance and recovery cycles are observed at multiple temporal scales; but long term, the channel beds are stable, suggesting that the beds act as short-term storage for sediment but are in equilibrium interannually. The feasibility of use for these sensors in forested mountain stream environments is tested. Despite a high failure rate (50%), load cell pressure sensors show potential for high-temporal-resolution bedload measurements, allowing for the collection of channel bed movement data to move beyond time-integrated change measurements - where many of the subtleties of bedload movement patterns may be missed - to continuous and/or real-time measurements. This

Computer games to teach hygiene: an evaluation of the e-Bug junior game

OpenAIRE

Farrell, D.; Kostkova, P.; Weinberg, J.; Lazareck, L.; Weerasinghe, D.; Lecky, D. M.; McNulty, C. A.

2011-01-01

Handwashing, respiratory hygiene and antibiotic resistance remain major public health concerns. In order to facilitate an effective outcome when teaching the basic principles of hand and respiratory hygiene, educational interventions should first target school children. As computer games are ubiquitous in most children's lives, e-Bug developed computer games targeted at teaching children handwashing, respiratory hygiene and antibiotic resistance. The games were designed for two target audienc...

Cooling of a polyethylene tunnel type greenhouse by means of a rock bed

Energy Technology Data Exchange (ETDEWEB)

Kurklu, Ahmet; Bilgin, Sefai [Akdeniz Univ., Dept. of Agricultural Mechanisation, Antalya (Turkey)

2004-10-01

An experiment was conducted to cool a 15 m{sup 2} ground area plastic-tunnel-type greenhouse by the use of a rock bed. An identical greenhouse with no rock bed was also erected for control purposes. Two rock-bed canals, each with the dimensions of 3 x l.25 x 0.75 m, were dug in the soil of the experimental greenhouse. After the canals were filled with the rocks and insulated, the top surface was covered by a soil layer of thickness enough for the root development depth of the plants. Air was pushed through the rock bed by a centrifugal fan with a 1100 m{sup 3}/h flow rate. Energy stored in the rock bed during the day was dumped outside the greenhouse at night using the cooler outside air. The results of the measurements showed that the rock-bed system maintained air temperature 14 deg C lower at maximum in the experimental greenhouse than the control one. The temperature difference seemed to increase with increasing solar radiation and outside air temperature. Relative humidity during the day remained at about 40% in the experimental greenhouse and was always higher than that in the control one. The coefficient of performance (COP) of the rock-bed system was higher than 3 in general, and it was observed that this value increased with decreasing rock-bed temperature. The average solar collection efficiency was 38%. The rock-bed system seems to have a significant potential for cooling applications in greenhouses. (Author)

Unveiling Exception Handling Bug Hazards in Android Based on GitHub and Google Code Issues

NARCIS (Netherlands)

Coelho, R.; Almeida, L.; Gousios, G.; Van Deursen, A.

2015-01-01

This paper reports on a study mining the exception stack traces included in 159,048 issues reported on Android projects hosted in GitHub (482 projects) and Google Code (157 projects). The goal of this study is to investigate whether stack trace information can reveal bug hazards related to exception

Thermalhydraulics of flowing particle-bed-type fusion reactor blankets

International Nuclear Information System (INIS)

Nietert, R.E.; Abdelk-Khalik, S.I.

1982-01-01

An experimental investigation has been conducted to determine the heat transfer characteristics of gravity-flowing particle beds using a special heat transfer loop. Glass microspheres were allowed to flow by gravity at controlled rates through an electrically heated stainless steel tubular test section. Values of the local and average convective heat transfer coefficient as a function of the average bed velocity, particle size and heat flux were determined. Such information is necessary for the design of gravity-flowing particle-bed type fusion reactor-blankets and associated tritium recovery systems. (orig.)

The distribution and function of serotonin in the large milkweed bug, Oncopeltus fasciatus. a comparative study with the blood-feeding bug, Rhodnius prolixus.

Science.gov (United States)

Miggiani, L; Orchard, I; TeBrugge, V

1999-11-01

The blood-feeding hemipteran, Rhodnius prolixus, ingests a large blood meal at the end of each larval stage. To accommodate and process this meal, its cuticle undergoes plasticisation, and its gut and Malpighian tubules respectively absorb and secrete a large volume of water and salts for rapid diuresis. Serotonin has been found to be integral to the feeding process in this animal, along with a diuretic peptide(s). The large milkweed bug, Oncopeltus fasciatus, tends to feed in a more continuous and abstemious manner, and therefore may have different physiological requirements than the blood feeder. Unlike R. prolixus, O. fasciatus is lacking serotonin-like immunoreactive dorsal unpaired median neurons in the mesothoracic ganglionic mass, and lacks serotonin-like immunoreactive neurohaemal areas and processes on the abdominal nerves, integument, salivary glands, and anterior junction of the foregut and crop. The salivary glands and crop do, however, respond to serotonin with increased levels of cAMP, while the integument and Malpighian tubules do not. In addition, O. fasciatus Malpighian tubules respond to both O. fasciatus and R. prolixus partially purified CNS extracts, which are likely to contain any native diuretic peptides. Thus, while serotonin and diuretic peptides may be involved in tubule control in R. prolixus, the latter may be of greater importance in O. fasciatus.

A new process control strategy for aqueous film coating of pellets in fluidised bed

DEFF Research Database (Denmark)

Larsen, C.C.; Sonnergaard, Jørn; Bertelsen, Pernille Scholdan

2003-01-01

The parameters with effect on maximum spray rate and maximum relative outlet air humidity when coating pellets in a fluidised bed were investigated. The tested variables include type of water based modified release film coating (Eudragit® NE 30D, Eudragit® RS 30D, Aquacoat ECD®) coating principle...... (top spray, bottom spray), inlet air humidity and type of pellets (sugar spheres, microcrystalline cellulose pellets). The maximum spray rate was not influenced by the coating principles. The highest spray rate was obtained for the film polymer with the lowest tackiness which is assumed...... to be the controlling factor. The type of pellets affected the maximum spray rate. A thermodynamic model for the coating process is employed throughout the process and not just during steady state. The thermodynamic model is incorporated into a new process control strategy. The process control strategy is based on in...

Evaluation of free-stall mattress bedding treatments to reduce mastitis bacterial growth

Energy Technology Data Exchange (ETDEWEB)

Kristula, M A; Dou, Z; Toth, J D; Smith, B I; Harvey, N; Sabo, M [University of Penn, Kennett Square, PA (United States)

2008-05-15

Bacterial counts were compared in free-stall mattresses and teat ends exposed to 5 treatments in a factorial study design on 1 dairy farm. Mattresses in five 30-cow groups were subjected to 1 of 5 bedding treatments every other day: 0.5 kg of hydrated limestone, 120 mL of commercial acidic conditioner, 1 kg of coal fly ash, 1 kg of kiln-dried wood shavings, and control (no bedding). Counts of coliforms, Klebsiella spp., Escherichia coli, and Streptococcus spp. were lowest on mattresses bedded with lime. Mattresses bedded with the commercial acidic conditioner had the next lowest counts for coliforms, Klebsiella spp., and Streptococcus spp. Wood shavings and the no-bedding control had the highest counts for coliform and Klebsiella spp. Compared with wood shavings or control, fly ash reduced the counts of coliforms, whereas for the other 3 bacterial groups, the reduction was not always significant. Streptococcus spp. counts were greatest in the control group and did not differ among the shavings and fly ash groups. Teat swab results indicated that hydrated lime was the only bedding treatment that significantly decreased the counts of both coliforms and Klebsiella spp. There were no differences in Streptococcus spp. numbers on the teats between any of the bedding treatments. Bacterial populations grew steadily on mattresses and were generally higher at 36 to 48 h than at 12 to 24 h, whereas bacterial populations on teats grew rapidly by 12 h and then remained constant. Hydrated lime was the only treatment that significantly reduced bacterial counts on both mattresses and teat ends, but it caused some skin irritation.

An adaptable, low cost test-bed for unmanned vehicle systems research

Science.gov (United States)

Goppert, James M.

2011-12-01

An unmanned vehicle systems test-bed has been developed. The test-bed has been designed to accommodate hardware changes and various vehicle types and algorithms. The creation of this test-bed allows research teams to focus on algorithm development and employ a common well-tested experimental framework. The ArduPilotOne autopilot was developed to provide the necessary level of abstraction for multiple vehicle types. The autopilot was also designed to be highly integrated with the Mavlink protocol for Micro Air Vehicle (MAV) communication. Mavlink is the native protocol for QGroundControl, a MAV ground control program. Features were added to QGroundControl to accommodate outdoor usage. Next, the Mavsim toolbox was developed for Scicoslab to allow hardware-in-the-loop testing, control design and analysis, and estimation algorithm testing and verification. In order to obtain linear models of aircraft dynamics, the JSBSim flight dynamics engine was extended to use a probabilistic Nelder-Mead simplex method. The JSBSim aircraft dynamics were compared with wind-tunnel data collected. Finally, a structured methodology for successive loop closure control design is proposed. This methodology is demonstrated along with the rest of the test-bed tools on a quadrotor, a fixed wing RC plane, and a ground vehicle. Test results for the ground vehicle are presented.

Artificial intelligence-based modeling and control of fluidized bed combustion

Energy Technology Data Exchange (ETDEWEB)

Ikonen, E.; Leppaekoski, K. (Univ. of Oulu, Dept. of Process and Environmental Engineering (Finland)). email: enso.ikonen@oulu.fi

2009-07-01

AI-inspired techniques have a lot to offer when developing methods for advanced identification, monitoring, control and optimization of industrial processes, such as power plants. Advanced control methods have been extensively examined in the research of the Power Plant Automation group at the Systems Engineering Laboratory, e.g., in fuel inventory modelling, combustion power control, modelling and control of flue gas oxygen, drum control, modelling and control of superheaters, or in optimization of flue-gas emissions. Most engineering approaches to artificial intelligence (AI) are characterized by two fundamental properties: the ability to learn from various sources and the ability to deal with plant complexity. Learning systems that are able to operate in uncertain environments based on incomplete information are commonly referred to as being intelligent. A number of other approaches exist, characterized by these properties, but not easily categorized as AI-systems. Advanced control methods (adaptive, predictive, multivariable, robust, etc.) are based on the availability of a model of the process to be controlled. Hence identification of processes becomes a key issue, leading to the use of adaptation and learning techniques. A typical learning control system concerns a selection of learning techniques applied for updating a process model, which in turn is used for the controller design. When design of learning control systems is complemented with concerns for dealing with uncertainties or vaguenesses in models, measurements, or even objectives, particularly close connections exist between advanced process control and methods of artificial intelligence and machine learning. Needs for advanced techniques are typically characterized by the desire to properly handle plant non-linearities, the multivariable nature of the dynamic problems, and the necessity to adapt to changing plant conditions. In the field of fluidized bed combustion (FBC) control, the many promising

Preventing Run-Time Bugs at Compile-Time Using Advanced C++

Energy Technology Data Exchange (ETDEWEB)

Neswold, Richard [Fermilab

2018-01-01

When writing software, we develop algorithms that tell the computer what to do at run-time. Our solutions are easier to understand and debug when they are properly modeled using class hierarchies, enumerations, and a well-factored API. Unfortunately, even with these design tools, we end up having to debug our programs at run-time. Worse still, debugging an embedded system changes its dynamics, making it tough to find and fix concurrency issues. This paper describes techniques using C++ to detect run-time bugs *at compile time*. A concurrency library, developed at Fermilab, is used for examples in illustrating these techniques.

Effect of interprofessional student-led beds on emergency department performance indicators.

Science.gov (United States)

Meek, Robert; Morphet, Julia; Hood, Kerry; Leech, Michelle; Sandry, Kate

2013-10-01

The study aims to compare ED performance indicators between patients managed by students in an inter-professional learning (IPL) programme and comparable patients receiving usual ED care. An IPL programme ran for five separate 2 week periods during 2012. Four student-led beds were managed by four final year students (two medical, two nursing). Four control beds were matched for patient acuity. Data were gathered electronically from the ED information system. Comparisons of baseline characteristics and a range of ED performance indicators were made between patients managed in the student-led and control beds. Patient satisfaction with student care was surveyed. Characteristics of the 369 study and 365 control patients were similar. Median times to being seen by a nurse and a doctor were not significantly different between student-led and control beds, at 50 (19-103) versus 45 (20-93) min, and 84 (28-162) versus 91 (41-165) min, respectively. Median time to inpatient referral for admitted patients was significantly longer in student-led compared with control beds, being 142 (65-249) versus 101.5 (48-200) min, respectively. Median lengths of stay were similar between the student-led and control groups, being 263 (201-343) versus 303.5 (204-384) min for discharged patients, and 866 (571-1238) versus 745.5 (487-1168) min for inpatient ward admissions. Patients reported high levels of satisfaction with student care. There was little difference in performance indicators between patients managed by student teams as part of an IPL programme and a similar group receiving usual ED care. © 2013 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Recovering stereo vision by squashing virtual bugs in a virtual reality environment

OpenAIRE

Vedamurthy, I; Knill, DC; Huang, SJ; Yung, A; Ding, J; Kwon, OS; Bavelier, D; Levi, DM

2016-01-01

Stereopsis is the rich impression of three-dimensionality, based on binocular disparity—the differences between the two retinal images of the same world. However, a substantial proportion of the population is stereo-deficient, and reliesmostly onmonocular cues to judge the relative depth or distance of objects in the environment. Here we trained adults who were stereo blind or stereodeficient owing to strabismus and/or amblyopia in a natural visuomotor task—a ‘bug squashing’ game—in a virtual...

The effect of hydraulic bed movement on the quality of chest compressions.

Science.gov (United States)

Park, Maeng Real; Lee, Dae Sup; In Kim, Yong; Ryu, Ji Ho; Cho, Young Mo; Kim, Hyung Bin; Yeom, Seok Ran; Min, Mun Ki

2017-08-01

The hydraulic height control systems of hospital beds provide convenience and shock absorption. However, movements in a hydraulic bed may reduce the effectiveness of chest compressions. This study investigated the effects of hydraulic bed movement on chest compressions. Twenty-eight participants were recruited for this study. All participants performed chest compressions for 2min on a manikin and three surfaces: the floor (Day 1), a firm plywood bed (Day 2), and a hydraulic bed (Day 3). We considered 28 participants of Day 1 as control and each 28 participants of Day 2 and Day 3 as study subjects. The compression rates, depths, and good compression ratios (>5-cm compressions/all compressions) were compared between the three surfaces. When we compared the three surfaces, we did not detect a significant difference in the speed of chest compressions (p=0.582). However, significantly lower values were observed on the hydraulic bed in terms of compression depth (p=0.001) and the good compression ratio (p=0.003) compared to floor compressions. When we compared the plywood and hydraulic beds, we did not detect significant differences in compression depth (p=0.351) and the good compression ratio (p=0.391). These results indicate that the movements in our hydraulic bed were associated with a non-statistically significant trend towards lower-quality chest compressions. Copyright © 2017 Elsevier Inc. All rights reserved.

Realisation of a gamma emission tomograph by a servo-controlled camera and bed

International Nuclear Information System (INIS)

Guzman-Torres, D.R.

1980-07-01

We took part in the building of a transverse axial emission tomograph intended for nuclear medicine. The following three points were dealt with: mathematical, choice of processing algorithm; electronic, development of equipment; experimental, testing of the system built. On the mathematical side, following a survey of reconstruction methods, we studied the use of a reconstruction algorithm after filtering of the projections by convolution which gives a good spatial resolution. We also proposed a means to solve the computing time/quality of image problem, leading to a satisfactory result within a shorter total investigation time. In this way the computing time has been reduced by a factor three. In the electronics field we built an interface between the bed, the gamma camera and the computer already in the laboratory. The present instrument corresponds to version no. 2. The system control the bed and gamma camera which are operated from the computer. Experimentally we were able on checking the calculations with a phantom made up of small emitting sources, to prove by finding the exact spot our ability to locate active foci on the patient. While the results obtained are encouraging from the image restitution viewpoint, the study of problems related to self-absorption inside the organ and those of statistical noise have still to be continued [fr

Management bedding : vrijloopstal met composterende bedding van houtsnippers

NARCIS (Netherlands)

Boer, de H.C.; Wiersma, M.; Galama, P.J.; Szanto, G.L.

2015-01-01

In de vrijloopstal liggen de koeien meestal op een organische bedding en scheiden daar mest (feces en urine) uit. Om de bedding voldoende droog en schoon te houden wordt er regelmatig nieuw strooisel aangevoerd en wordt de toplaag bewerkt. Op basis van onderzoek- en praktijkervaringen tot nu toe

Design and control of one precise tracking simulation bed for Chinese 20/30 meter optic/infrared telescope

Science.gov (United States)

Ren, Changzhi; Li, Xiaoyan; Song, Xiaoli; Niu, Yong; Li, Aihua; Zhang, Zhenchao

2012-09-01

Direct drive technology is the key to solute future 30-m and larger telescope motion system to guarantee a very high tracking accuracy, in spite of unbalanced and sudden loads such as wind gusts and in spite of a structure that, because of its size, can not be infinitely stiff. However, this requires the design and realization of unusually large torque motor that the torque slew rate must be extremely steep too. A conventional torque motor design appears inadequate. This paper explores one redundant unit permanent magnet synchronous motor and its simulation bed for 30-m class telescope. Because its drive system is one high integrated electromechanical system, one complexly electromechanical design method is adopted to improve the efficiency, reliability and quality of the system during the design and manufacture circle. This paper discusses the design and control of the precise tracking simulation bed in detail.

Root Cause Assessment of Pressure Drop Rise of a Packed Bed of Lithium Hydroxide in the International Space Station Trace Contaminant Control System

Science.gov (United States)

Aguilera, Tatiana; Perry, Jay L.

2009-01-01

The trace contaminant control system (TCCS) located in the International Space Station s (ISS) U.S. laboratory module employs physical adsorption, thermal catalytic oxidation, and chemical adsorption to remove trace chemical contamination produced by equipment offgassing and anthropogenic sources from the cabin atmosphere. The chemical adsorption stage, consisting of a packed bed of granular lithium hydroxide (LiOH), is located after the thermal catalytic oxidation stage and is designed to remove acid gas byproducts that may be formed in the upstream oxidation stage. While in service on board the ISS, the LiOH bed exhibited a change in flow resistance that leading to flow control difficulties in the TCCS. Post flight evaluation revealed LiOH granule size attrition among other changes. An experimental program was employed to investigate mechanisms hypothesized to contribute to the change in the packed bed s flow resistance. Background on the problem is summarized, including a discussion of likely mechanisms. The experimental program is described, results are presented, and implications for the future are discussed.

Tumour bed boost radiotherapy for women after breast-conserving surgery.

Science.gov (United States)

Kindts, Isabelle; Laenen, Annouschka; Depuydt, Tom; Weltens, Caroline

2017-11-06

Breast-conserving therapy, involving breast-conserving surgery followed by whole-breast irradiation and optionally a boost to the tumour bed, is a standard therapeutic option for women with early-stage breast cancer. A boost to the tumour bed means that an extra dose of radiation is applied that covers the initial tumour site. The rationale for a boost of radiotherapy to the tumour bed is that (i) local recurrence occurs mostly at the site of the primary tumour because remaining microscopic tumour cells are most likely situated there; and (ii) radiation can eliminate these causative microscopic tumour cells. The boost continues to be used in women at high risk of local recurrence, but is less widely accepted for women at lower risk. Reasons for questioning the boost are twofold. Firstly, the boost brings higher treatment costs. Secondly, the potential adverse events are not negligible. In this Cochrane Review, we investigated the effect of the tumour bed boost on local control and side effects. To assess the effects of tumour bed boost radiotherapy after breast-conserving surgery and whole-breast irradiation for the treatment of breast cancer. We searched the Cochrane Breast Cancer Specialised Register, the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE (January 1966 to 1 March 2017), Embase (1980 to 1 March 2017), the World Health Organization International Clinical Trials Registry Platform, and ClinicalTrials.gov on 1 March 2017. We also searched the European Society of Radiotherapy and Oncology Annual Meeting, the St Gallen Oncology Conferences, and the American Society for Radiation Oncology Annual Meeting for abstracts. Randomised controlled trials comparing the addition and the omission of breast cancer tumour bed boost radiotherapy. Two review authors (IK and CW) performed data extraction and assessed risk of bias using Cochrane's 'Risk of bias' tool, resolving any disagreements through discussion. We entered data into Review Manager 5 for

Millennial angst? Insidious Y2K computer bug could have devastating consequences if not remedied

International Nuclear Information System (INIS)

Ross, E.

1999-01-01

The threat of the Y2K bug facing the petroleum industry was discussed. The bug can potentially affect every aspect of the industry relying on computerized and automated systems and equipment, from production to transportation. The importance for oil companies to establish contingency plans was emphasized. For example, Enbridge Energy Inc. is planning to be Y2K ready on all mission critical systems by June 1999. On the pipeline side, this means anything dealing with physical safety and the operational reliability of the pipeline. Canadian Occidental Petroleum Ltd., has tested everything dealing with environmental or public safety risk and regularly checks on how their suppliers are progressing with Y2K compliance. Companies will also face regulatory requirements, For example, the Alberta Energy and Utilities Board will be checking on 127 companies considered high risk, primarily for safety reasons. This includes operators of sour gas plants or pipelines and gas or electrical utilities. The upstream petroleum industry generally, is reported to be making good progress in addressing the issue

How Do Visitors Relate to Biodiversity Conservation? An Analysis of London Zoo's "BUGS" Exhibit

Science.gov (United States)

Chalmin-Pui, Lauriane Suyin; Perkins, Richard

2017-01-01

Using a case study of London Zoo's BUGS (Biodiversity Underpinning Global Survival) exhibit, this article assesses the role of experiential learning in raising biodiversity knowledge, concern and potential pro-conservation actions. Using Personal Meaning Mindmapping, a novel method in visitor research, the study examines how adult visitors relate…

The thermal conductivity of beds of spheres

International Nuclear Information System (INIS)

McElroy, D.L.; Weaver, F.J.; Shapiro, M.; Longest, A.W.; Yarbrough, D.W.

1987-01-01

The thermal conductivities (k) of beds of solid and hollow microspheres were measured using two radial heat flow techniques. One technique provided k-data at 300 K for beds with the void spaces between particles filled with argon, nitrogen, or helium from 5 kPa to 30 MPa. The other technique provided k-data with air at atmospheric pressure from 300 to 1000 K. The 300 K technique was used to study bed systems with high k-values that can be varied by changing the gas type and gas pressure. Such systems can be used to control the operating temperature of an irradiation capsule. The systems studied included beds of 500 μm dia solid Al 2 O 3 , the same Al 2 O 3 spheres mixed with spheres of silica--alumina or with SiC shards, carbon spheres, and nickel spheres. Both techniques were used to determine the k-value of beds of hollow spheres with solid shells of Al 2 O 3 , Al 2 O 3 /center dot/7 w/o Cr 2 O 3 , and partially stabilized ZrO 2 . The hollow microspheres had diameters from 2100 to 3500 μm and wall thicknesses from 80 to 160 μm. 12 refs., 7 figs., 4 tabs

Recovering stereo vision by squashing virtual bugs in a virtual reality environment.

Science.gov (United States)

Vedamurthy, Indu; Knill, David C; Huang, Samuel J; Yung, Amanda; Ding, Jian; Kwon, Oh-Sang; Bavelier, Daphne; Levi, Dennis M

2016-06-19

Stereopsis is the rich impression of three-dimensionality, based on binocular disparity-the differences between the two retinal images of the same world. However, a substantial proportion of the population is stereo-deficient, and relies mostly on monocular cues to judge the relative depth or distance of objects in the environment. Here we trained adults who were stereo blind or stereo-deficient owing to strabismus and/or amblyopia in a natural visuomotor task-a 'bug squashing' game-in a virtual reality environment. The subjects' task was to squash a virtual dichoptic bug on a slanted surface, by hitting it with a physical cylinder they held in their hand. The perceived surface slant was determined by monocular texture and stereoscopic cues, with these cues being either consistent or in conflict, allowing us to track the relative weighting of monocular versus stereoscopic cues as training in the task progressed. Following training most participants showed greater reliance on stereoscopic cues, reduced suppression and improved stereoacuity. Importantly, the training-induced changes in relative stereo weights were significant predictors of the improvements in stereoacuity. We conclude that some adults deprived of normal binocular vision and insensitive to the disparity information can, with appropriate experience, recover access to more reliable stereoscopic information.This article is part of the themed issue 'Vision in our three-dimensional world'. © 2016 The Author(s).

Recovering stereo vision by squashing virtual bugs in a virtual reality environment

Science.gov (United States)

Vedamurthy, Indu; Knill, David C.; Huang, Samuel J.; Yung, Amanda; Ding, Jian; Kwon, Oh-Sang; Bavelier, Daphne

2016-01-01

Stereopsis is the rich impression of three-dimensionality, based on binocular disparity—the differences between the two retinal images of the same world. However, a substantial proportion of the population is stereo-deficient, and relies mostly on monocular cues to judge the relative depth or distance of objects in the environment. Here we trained adults who were stereo blind or stereo-deficient owing to strabismus and/or amblyopia in a natural visuomotor task—a ‘bug squashing’ game—in a virtual reality environment. The subjects' task was to squash a virtual dichoptic bug on a slanted surface, by hitting it with a physical cylinder they held in their hand. The perceived surface slant was determined by monocular texture and stereoscopic cues, with these cues being either consistent or in conflict, allowing us to track the relative weighting of monocular versus stereoscopic cues as training in the task progressed. Following training most participants showed greater reliance on stereoscopic cues, reduced suppression and improved stereoacuity. Importantly, the training-induced changes in relative stereo weights were significant predictors of the improvements in stereoacuity. We conclude that some adults deprived of normal binocular vision and insensitive to the disparity information can, with appropriate experience, recover access to more reliable stereoscopic information. This article is part of the themed issue ‘Vision in our three-dimensional world’. PMID:27269607

Geomechanics of bedded salt

International Nuclear Information System (INIS)

Serata, S.; Milnor, S.W.

1979-01-01

Creep data from the literature search is reinterpreted by SGI, resulting in a better understanding of the temperature and stress state dependence of the octahedral creep rate and the octahedral shear strength. The concept of a transition strength between the elastic and the plastic states is in agreement with the data. The elastic and rheological properties of salt are described, and a set of constitutive equations is presented. The dependence of material properties on parameters such as temperature is considered. Findings on the permeability of salt are summarized, and the in-situ behavior of openings in bedded salt is described based on extensive engineering experience. A stress measuring system utilizing a finite element computer code is discussed. Geological factors affecting the stability of salt openings are considered, and the Stress Control Technique for designing stable openings in bedded salt formations is explained

Effect of bed particles to combustion of gases in fluidized bed

Energy Technology Data Exchange (ETDEWEB)

Raiko, R.; Wallen, V.; Etelaeaho, R.; Correia, S. [Tampere Univ. of Technology (Finland). Energy and Process Engineering

1997-10-01

The objective of this project was to obtain experimental data on effects of sand particles to the combustion of gases. The effect of the surface area of the particles was tested using different sized particles. The fluidized bed reactor used in these experiments was a stainless-steel tube with an internal diameter of 42 mm surrounded by an electric heater. The test rig was built in the Laboratory of Energy and Process Engineering at Tampere University of Technology. In order to elucidate the possible changes of particle surface, microscopic and porosimetric studies were conducted with both fresh bed particles and used bed particles. These measurements indicate that carbon monoxide significantly reacts with oxygen in the particulate or emulsion phase of a fluidized bed, if the residence time is long enough. The reaction rate depends mainly on temperature, air coefficient, residence time and particle size of the solids. It seems that the combustion enhances if the average particle size increases. Whether this is caused by increased free path length or reduced specific surface area of the bed is yet unknown. The first might be more probable cause because the majority of reactions often took place in the freeboard right above the bed. It was clear that the bed hindered proper combustion in several cases. (orig.)

Eficiência de Metarhizium anisopliae no controle do Percevejo-do-Colmo Tibraca limbativentris (Heteroptera: Pentatomidae em lavoura de arroz irrigado Efficiency of Metarhizium anisopliae on rice stem bug Tibraca limbativentris (Heteroptera: Pentatomidae control in flooded rice field

Directory of Open Access Journals (Sweden)

José Francisco da Silva Martins

2004-12-01

, pode provavelmente reduzir a taxa de disseminação do fungo nos arrozais e, por conseqüência, ser desfavorável à ocorrência de epizootias.The rice stem bug, Tibraca limbativentris Stal, 1860 (Heteroptera: Pentatomidae, is an important pest of rice (Oryza sativa L. in Brazil, mainly in flooded system of cultivation. The effect of two ways of application (conidia in aqueous suspension and on rice grain of Metarhizium anisopliae strain 172 for the control of the rice stem bug, was evaluated in three experiments conducted in 1991, 1992 and 1994 in commercial irrigated rice. In 1991, the spraying of conidia suspension and manual distribution of rice grain covered with fungal material at dose of 7.2 x 10(13 conidia.ha-1, on soil and among rice stems, where the bugs were located, reduced significantly the insect natural population with control efficiencies of 52.6 and 61.8%, respectively. Studies about establishment and persistence of fungal conidia in soil, using the colony forming unity (CFU counts, indicated that the fungus persisted in the soil between two rice crop seasons, up to 216 days after application, when new rice crops were established. The number of CFU was greater in the plots treated with rice grain covered with fungal material. The linear growth of CFU in the control plots showed that the fungus spread to the untreated areas of the rice field. Significant control efficiency was obtained in 1993 for grain and aqueous fungus treatment with 48.2% and 51.8%, respectively. In 1994, the conidial suspension at dose of 5x10(13 conidia.ha-1 resulted in control efficiency of 39.5%. The level of insect mycosis, however, was low in both 1993 and 1994, reaching a maximum of 20% mycosis in 1993. The low numbers of insect with mycosis compared with the level of mortality, may probably reduce the rate of fungal dissemination in rice fields and, consequently, be detrimental to the occurrence of epizootics.

Security Vulnerability Profiles of Mission Critical Software: Empirical Analysis of Security Related Bug Reports

Science.gov (United States)

Goseva-Popstojanova, Katerina; Tyo, Jacob

2017-01-01

While some prior research work exists on characteristics of software faults (i.e., bugs) and failures, very little work has been published on analysis of software applications vulnerabilities. This paper aims to contribute towards filling that gap by presenting an empirical investigation of application vulnerabilities. The results are based on data extracted from issue tracking systems of two NASA missions. These data were organized in three datasets: Ground mission IVV issues, Flight mission IVV issues, and Flight mission Developers issues. In each dataset, we identified security related software bugs and classified them in specific vulnerability classes. Then, we created the security vulnerability profiles, i.e., determined where and when the security vulnerabilities were introduced and what were the dominating vulnerabilities classes. Our main findings include: (1) In IVV issues datasets the majority of vulnerabilities were code related and were introduced in the Implementation phase. (2) For all datasets, around 90 of the vulnerabilities were located in two to four subsystems. (3) Out of 21 primary classes, five dominated: Exception Management, Memory Access, Other, Risky Values, and Unused Entities. Together, they contributed from 80 to 90 of vulnerabilities in each dataset.

Bed retained products in swept fixed bed (SFB) coal hydropyrolysis

Energy Technology Data Exchange (ETDEWEB)

Mastral, A.M.; Perez-Surio, M.J. [CSIC, Zaragosa (Spain). Inst. de Carboquimica

1997-12-31

The hydropyrolysis of a low rank coal in a swept fixed bed (SFB) reactor is carried out by fixing the hydrogen pressure (40 kg/cm{sup 2}), the hydrogen flow (2 l/min) and the residence time (10 min) at increasing temperatures (400 C, 500 C and 600 C) and coal bed heights (h, 1.5h, 2h, 2.5h and 3h). It is shown that the percentages of tars and char directly depend on the coal bed height and that there is not only a quantitative dependence, but also the height of the coal bed is very important and plays a relevant role on the nature of the conversion products. (orig.)

Competition between the phytophagous stink bugs Euschistus heros and Piezodorus guildinii in soybeans.

Science.gov (United States)

Tuelher, Edmar S; Silva, Éder H; Hirose, Edson; Guedes, Raul Narciso C; Oliveira, Eugênio E

2016-10-01

The abundance and contribution of the neotropical brown stink bug, Euschistus heros (F.), and the redbanded stink bug, Piezodorus guildinii (West.), to the composition of insect pests of soybean, Glycine max (L.), fields have changed both spatially and temporally in neotropical soybean production areas. Therefore, we assessed the competitiveness of each species in direct competition experiments following an additive series. We performed mixed (adult) insect infestations in soybean plants and evaluated the fitness of each species and the soybean yield. While the competitive ability of E. heros was significantly compromised by increments in conspecifics and heterospecifics (i.e. P. guildinii), the competitive ability of P. guildinii was compromised by the presence of heterospecifics (i.e. E. heros). The reproductive output of P. guildinii remained unaffected by increments in E. heros or of P. guildinii. Intriguingly, despite the fact that P. guildinii apparently lost the competition with E. heros, almost no pod production was observed in any plant colonised by the former. The higher abundance of E. heros in neotropical soybean fields seems to result from higher competitive ability than its heterospecific competitor P. guildinii, which may prevent the higher losses caused by P. guildinii. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

In-bed accountability of tritium in production scale metal hydride storage beds

International Nuclear Information System (INIS)

Klein, J.E.

1995-01-01

An ''in-bed accountability'' (IBA) flowing gas calorimetric measurement method has been developed and implemented to eliminate the need to remove tritium from production scale metal hydride storage beds for inventory measurement purposes. Six-point tritium IBA calibration curves have been completed for two, 390 gram tritium metal hydride storage beds. The calibration curves for the two tritium beds are similar to those obtained from the ''cold'' test program. Tritium inventory errors at the 95 percent confidence level ranged from ± 7.3 to 8.6 grams for the cold test results compared to ± 4.2 to 7.5 grams obtained for the two tritium calibrated beds

Addition of Bacillus sp. inoculums in bedding for swine on a pilot scale: effect on microbial population and bedding temperature.

Science.gov (United States)

Corrêa, E K; Ulguim, R R; Corrêa, L B; Castilhos, D D; Bianchi, I; Gil-Turnes, C; Lucia, T

2012-10-01

Thermal and microbiological characteristics of beddings for swine were compared according to their depth and of addition of inoculums. Bedding was added to boxes at 0.25 (25D) and 0.50 m (50D), with three treatments: control (no inoculums); T1, with 250 g of Bacillus cereus var. toyoii at 8.4 × 10(7) CFU; and T2, with 250 g of a pool of B. subtilis, Bacillus licheniformis and Bacillus polymyxa at 8.4 × 10(7) CFU (250 g for 25D and 500 g for 50D). Mean temperatures were 28.5 ± 3.9 at the surface and 35.2 ± 8.9 inside the beddings. The most probable number (MPN) of thermophilic bacteria was higher for T1 and T2 than for the control (P<0.05). The MPN of thermophilic bacteria and fungi was greater for D50 than for D25 (P<0.05). The use of 25D without inoculums is recommended due to the reduction of thermophilic microbiota. Copyright © 2012 Elsevier Ltd. All rights reserved.

Thermal Analysis of Fluidized Bed and Fixed Bed Latent Heat Thermal Storage System

Science.gov (United States)

Beemkumar, N.; Karthikeyan, A.; Shiva Keshava Reddy, Kota; Rajesh, Kona; Anderson, A.

2017-05-01

Thermal energy storage technology is essential because its stores available energy at low cost. Objective of the work is to store the thermal energy in a most efficient method. This work is deal with thermal analysis of fluidized bed and fixed bed latent heat thermal storage (LHTS) system with different encapsulation materials (aluminium, brass and copper). D-Mannitol has been used as phase change material (PCM). Encapsulation material which is in orbicular shape with 4 inch diameter and 2 mm thickness orbicular shaped product is used. Therminol-66 is used as a heat transfer fluid (HTF). Arrangement of encapsulation material is done in two ways namely fluidized bed and fixed bed thermal storage system. Comparison was made between the performance of fixed bed and fluidized bed with different encapsulation material. It is observed that from the economical point of view aluminium in fluidized bed LHTS System has highest efficiency than copper and brass. The thermal energy storage system can be analyzed with fixed bed by varying mass flow rate of oil paves a way to find effective heat energy transfer.

Engineered channel controls limiting spawning habitat rehabilitation success on regulated gravel-bed rivers

Science.gov (United States)

Brown, Rocko A.; Pasternack, Gregory B.

2008-05-01

In efforts to rehabilitate regulated rivers for ecological benefits, the flow regime has been one of the primary focal points of management strategies. However, channel engineering can impact channel geometry such that hydraulic and geomorphic responses to flow reregulation do not yield the sought for benefits. To illustrate and assess the impacts of structural channel controls and flow reregulation on channel processes and fish habitat quality in multiple life stages, a highly detailed digital elevation model was collected and analyzed for a river reach right below a dam using a suite of hydrologic, hydraulic, geomorphic, and ecological methods. Results showed that, despite flow reregulation to produce a scaled-down natural hydrograph, anthropogenic boundary controls have severely altered geomorphic processes associated with geomorphic self-sustainability and instream habitat availability in the case study. Given the similarity of this stream to many others, we concluded that the potential utility of natural flow regime reinstatement in regulated gravel-bed rivers is conditional on concomitant channel rehabilitation.

Chemical characteristics of beddings for swine: effects of bedding depths and of addition of inoculums in a pilot-scale.

Science.gov (United States)

Corrêa, E K; Corezzolla, J L; Corrêa, M N; Bianchi, I; Gil-Turnes, C; Lucia, T

2012-11-01

The effect of depths and of addition of inoculums on the chemical content of swine beddings was evaluated. For beddings 0.25m (25D) and 0.50m (50D) deep, three treatments were tested in two repeats with the same beddings: control (no inoculums); T1 (250g of Bacillus cereus var. toyoii at 8.4×10(7)CFU/g); and T2 (250g of a pool of Bacillus sp. at 8.4×10(7)CFU/g) (250g for 25D and 500g for 50D). For 25D, the C:N ratio was lower, but N, K and C contents were greater than for 50D (P0.05). In the second repeat, beddings presented lower C:N ratio and greater N, P and K contents than in the first repeat (P<0.05). Thus, the compost produced after using 25D twice had greater fertilizer value than that of 50D. Copyright © 2012 Elsevier Ltd. All rights reserved.

Feasibility of Using Rice Hulls as Bedding for Laboratory Mice.

Science.gov (United States)

Carbone, Elizabeth T; Kass, Philip H; Evans, Kristin D

2016-01-01

Factors that are considered when selecting laboratory mouse bedding include animal health and comfort, cost, effects on personnel, and bioactive properties. Corncob is economical and facilitates low intracage ammonia but has undesirable influences on some endocrine studies. Rice hulls are an economical material that has not been well characterized as a bedding substrate. In this pilot study, we compared various aspects of bedding performance of rice hulls and other materials. On a per-volume basis, rice hulls were less absorbent than was corncob bedding. Rice hulls had higher odds than did corncob or reclaimed wood pulp of having moisture present at the bedding surface. The results of the absorbency tests coupled with the results of preliminary monitoring of intracage ammonia raised concern about the ability of rice hulls to control ammonia levels sufficiently in cages with high occupancy. However, ammonia was negligible when cages contained 5 young adult female mice. The relative expression of 3 cytochrome p450 genes was compared among mice housed on rice hulls, corncob, reclaimed wood pulp, or pine shavings. The expression of Cyp1a2 was 1.7 times higher in the livers of mice housed on rice hulls than on pine shavings, but other differences were not statistically significant. This study provides information on the merits of rice hulls as laboratory mouse bedding. Their relatively poor moisture control is a major disadvantage that might preclude their widespread use.

Bed care for patients in palliative settings: considering risks to caregivers and bed surfaces.

Science.gov (United States)

Fragala, Guy

2015-02-01

Ensuring patients are comfortable in bed is key to effective palliative care, but when moving and positioning patients in bed, health professionals face an occupational risk of injury. The turning and positioning (TAP) system is a new method of moving patients in bed, that evidence has shown to reduce the risk of injury to caregivers. Providing the correct bed surface is another aspect of bed care essential to the comfort of the palliative patient, and to aid wound prevention and treatment. It is important to take a patient-centred approach when considering the most appropriate bed surface patients. This article provides an overview and discussion of these two aspects of bed care for palliative patients.

Analysis of the start-up and control of a particle bed reactor

International Nuclear Information System (INIS)

Lazareth, O.W.; Araj, K.J.; Horn, F.L.; Ludewig, H.; Powell, J.R.

1987-01-01

This study describes the modeling of start-up transients in Particle Bed Reactors (PBR) for burst electric power. Two computer programs have been developed to analyze the start-up process. The first program (named KINETIC) analyzes the entire fuel element, calculating time dependent solutions for power and the temperature distribution in the packed bed. The second program (named SPHEAT, for Spherical Heating) calculates time-dependent temperatures inside individual, cladded fuel particles. The two programs provide powerful analytical tools for evaluation of material and geometrical options, power and time constraints, and conditions that could lead to element failures

Fluid bed porosity equation for an inverse fluidized bed bioreactor with particles growing biofilm

International Nuclear Information System (INIS)

Campos-Diaz, K. E.; Limas-Ballesteros, R.

2009-01-01

Fluid Bed Bioreactor performance is strongly affected by bed void fraction or bed porosity fluctuations. Particle size enlargement due to biofilm growth is an important factor that is involved in these variations and until now there are no mathematical equations that consider biofilm growth. In this work a mathematical equation is proposed to calculate bed void fraction in an inverse fluid bed bioreactor. (Author)

Impact of Bug-in-Ear Professional Development on Early Childhood Co-Teachers' Use of Communication Strategies

Science.gov (United States)

Ottley, Jennifer R.; Grygas Coogle, Christan; Rahn, Naomi L.; Spear, Caitlin F.

2017-01-01

The goal of this study was to build the capacity of early childhood teachers to implement evidence-based strategies. We investigated the efficacy of professional development with bug-in-ear peer coaching in improving teachers' use of communication strategies, the teachers' maintenance of strategies post intervention, and the social validity of the…

Childhood pneumonia and crowding, bed-sharing and nutrition: a case-control study from The Gambia.

Science.gov (United States)

Howie, S R C; Schellenberg, J; Chimah, O; Ideh, R C; Ebruke, B E; Oluwalana, C; Mackenzie, G; Jallow, M; Njie, M; Donkor, S; Dionisio, K L; Goldberg, G; Fornace, K; Bottomley, C; Hill, P C; Grant, C C; Corrah, T; Prentice, A M; Ezzati, M; Greenwood, B M; Smith, P G; Adegbola, R A; Mulholland, K

2016-10-01

Greater Banjul and Upper River Regions, The Gambia. To investigate tractable social, environmental and nutritional risk factors for childhood pneumonia. A case-control study examining the association of crowding, household air pollution (HAP) and nutritional factors with pneumonia was undertaken in children aged 2-59 months: 458 children with severe pneumonia, defined according to the modified WHO criteria, were compared with 322 children with non-severe pneumonia, and these groups were compared to 801 neighbourhood controls. Controls were matched by age, sex, area and season. Strong evidence was found of an association between bed-sharing with someone with a cough and severe pneumonia (adjusted OR [aOR] 5.1, 95%CI 3.2-8.2, P Malnutrition and pneumonia had clear evidence of association, which was strongest between severe malnutrition and severe pneumonia (aOR 8.7, 95%CI 4.2-17.8, P malnutrition remains an important tractable determinant.

The Effect of Bedding Structure on Mechanical Property of Coal

Directory of Open Access Journals (Sweden)

Zetian Zhang

2014-01-01

Full Text Available The mechanical property of coal, influencing mining activity considerably, is significantly determined by the natural fracture distributed within coal mass. In order to study the effecting mechanism of bedding structure on mechanical property of coal, a series of uniaxial compression tests and mesoscopic tests have been conducted. The experimental results show that the distribution characteristic of calcite particles, which significantly influences the growth of cracks and the macroscopic mechanical properties of coal, is obviously affected by the bedding structure. Specifically, the uniaxial compression strength of coal sample is mainly controlled by bedding structure, and the average peak stress of specimens with axes perpendicular to the bedding planes is 20.00 MPa, which is 2.88 times the average amount of parallel ones. The test results also show a close relationship between the bedding structure and the whole deformation process under uniaxial loading.

Powder bed charging during electron-beam additive manufacturing

International Nuclear Information System (INIS)

Cordero, Zachary C.; Meyer, Harry M.; Nandwana, Peeyush; Dehoff, Ryan R.

2017-01-01

Electrons injected into the build envelope during powder bed electron-beam additive manufacturing can accumulate on the irradiated particles and cause them to repel each other. Under certain conditions, these electrostatic forces can grow so large that they drive the particles out of the build envelope in a process known as “smoking”. In the present work, we investigate the causes of powder bed charging and smoking during electron-beam additive manufacturing. In the first part of the paper, we characterize the surface chemistry of a common feedstock material—gas-atomized Ti-6Al-4V powder—and find that a thick, electrically insulating oxide overlayer encapsulates the particles. Based on these experimental results, we then formulate an analytical model of powder bed charging in which each particle is approximated as a capacitor, where the particle and its substrate are the electrodes and the oxide overlayer is the dielectric. Using this model, we estimate the charge distribution in the powder bed, the electrostatic forces acting on the particles, and the conditions under which the powder bed will smoke. It is found that the electrical resistivity of the oxide overlayer strongly influences the charging behavior of the powder bed and that a high resistivity promotes charge accumulation and consequent smoking. This analysis suggests new quality control and process design measures that can help suppress smoking.

Coal-char combustion in a fluidised bed reactor

Energy Technology Data Exchange (ETDEWEB)

Mehrotra, S.P.; Pande, M. [Indian Institute of Technolgy, Kanpur (India)

2001-12-01

Combustion of bituminous coal chars ranging from 0.8 mm to 1.8 mm has been studied in a fluidised bed reactor at temperatures ranging from 500 to 850{sup o}C. The fluidised bed consists of inert sand particles of average size of 0.5 mm and reactive coal char particles. A heat balance has been worked out to calculate the rate of combustion of char from measured incremental changes in the bed temperature during combustion. Investigations on partially burnt particles suggest that the ash layer which builds up around the burning core of char particles is non-flaking and the particles burn in a shrinking core manner. Analysis of rate data indicates that the rate of combustion is controlled by chemical reaction kinetics, though diffusion of oxygen through the bundary layer begins to influence the overall reaction kinetics at higher temperatures. The burnt out time varies linearly with particle size. Activation energy for the chemical reaction control regime is found to be around 68 kJ/mole.

Characterization of TES bolometers used in 2-dimensional Backshort-Under-Grid (BUG) arrays for far-infrared astronomy

International Nuclear Information System (INIS)

Staguhn, J.G.; Allen, C.A.; Benford, D.J.; Chervenak, J.A.; Chuss, D.T.; Miller, T.M.; Moseley, S.H.; Wollack, E.J.

2006-01-01

We have produced a laboratory demonstration of our new Backshort-Under-Grid (BUG) bolometer array architecture in a monolithic, 2-dimensional, 8x8 format. The detector array is designed as a square grid of suspended, 1μm thick silicon bolometers with superconducting molybdium/gold bilayer TESs. These detectors use an additional layer of gold bars deposited on top of the bilayer, oriented transverse to the direction of the current flow, for the suppression of excess noise. This detector design has earlier been shown to provide near fundamental noise limited device performance. We present results from performance measurements of witness devices. In particular we demonstrate that the inband excess noise level of the TES detectors is less than 20% above the thermodynamic phonon noise limit and not significantly higher out of band at frequencies that cannot be attenuated by the Nyquist filter. Our 8x8 BUG arrays will be used in the near future for astronomical observations in several (sub-)millimeter instruments

GCMS investigation of volatile compounds in green coffee affected by potato taste defect and the Antestia bug.

Science.gov (United States)

Jackels, Susan C; Marshall, Eric E; Omaiye, Angelica G; Gianan, Robert L; Lee, Fabrice T; Jackels, Charles F

2014-10-22

Potato taste defect (PTD) is a flavor defect in East African coffee associated with Antestiopsis orbitalis feeding and 3-isopropyl-2-methoxypyrazine (IPMP) in the coffee. To elucidate the manifestation of PTD, surface and interior volatile compounds of PTD and non-PTD green coffees were sampled by headspace solid phase microextraction and analyzed by gas chromatography mass spectrometry. Principal component analysis of the chromatographic data revealed a profile of surface volatiles distinguishing PTD from non-PTD coffees dominated by tridecane, dodecane, and tetradecane. While not detected in surface volatiles, IPMP was found in interior volatiles of PTD coffee. Desiccated antestia bugs were analyzed by GCMS, revealing that the three most prevalent volatiles were tridecane, dodecane, and tetradecane, as was found in the surface profile PTD coffee. Coffee having visible insect damage exhibited both a PTD surface volatile profile and IPMP in interior volatiles, supporting the hypothesis linking antestia bug feeding activity with PTD profile compounds on the surface and IPMP in the interior of the beans.

Social marketing of insecticide-treated bed net for malaria control ...

African Journals Online (AJOL)

Background: The effectiveness of the insecticide-treated bed net in reducing the morbidity and mortality associated with malaria has been proved at all levels of malaria transmission. Several models on how to achieve massive coverage have been suggested, but social marketing of the nets is highly favoured for its ...

Pebble-bed reactor

International Nuclear Information System (INIS)

Lohnert, G.; Mueller-Frank, U.; Heil, J.

1976-01-01

A pebble-bed nuclear reactor of large power rating comprises a container having a funnel-shaped bottom forming a pebble run-out having a centrally positioned outlet. A bed of downwardly-flowing substantially spherical nuclear fuel pebbles is positioned in the container and forms a reactive nuclear core maintained by feeding unused pebbles to the bed's top surface while used or burned-out pebbles run out and discharge through the outlet. A substantially conical body with its apex pointing upwardly and its periphery spaced from the periphery of the container spreads the bottom of the bed outwardly to provide an annular flow down the funnel-shaped bottom forming the runout, to the discharge outlet. This provides a largely constant downward velocity of the spheres throughout the diameter of the bed throughout a substantial portion of the down travel, so that all spheres reach about the same burned-out condition when they leave the core, after a single pass through the core area

The Safety of Hospital Beds

Science.gov (United States)

Gervais, Pierre; Pooler, Charlotte; Merryweather, Andrew; Doig, Alexa K.; Bloswick, Donald

2015-01-01

To explore the safety of the standard and the low hospital bed, we report on a microanalysis of 15 patients’ ability to ingress, move about the bed, and egress. The 15 participants were purposefully selected with various disabilities. Bed conditions were randomized with side rails up or down and one low bed with side rails down. We explored the patients’ use of the side rails, bed height, ability to lift their legs onto the mattress, and ability to turn, egress, and walk back to the chair. The standard bed was too high for some participants, both for ingress and egress. Side rails were used by most participants when entering, turning in bed, and exiting. We recommend that side rails be reconsidered as a means to facilitate in-bed movement, ingress, and egress. Furthermore, single deck height settings for all patients are not optimal. Low beds as a safety measure must be re-evaluated. PMID:28462302

Fluid-bed combustion

Energy Technology Data Exchange (ETDEWEB)

Hunt, G.; Schoebotham, N.

1981-02-01

In Energy Equipment Company's two-stage fluidized bed system, partial combustion in a fluidized bed is followed by burn-off of the generated gases above the bed. The system can be retrofitted to existing boilers, and can burn small, high ash coal efficiently. It has advantages when used as a hot gas generator for process drying. Tests on a boiler at a Cadbury Schweppes plant are reported.

Distribution and activity of a Dippu DH31-like peptide in the large milkweed bug Oncopeltus fasciatus.

Science.gov (United States)

Te Brugge, V A; Orchard, I

2008-02-01

The milkweed bug, Oncopeltus fasciatus, is a plant feeding hemipteran. While there has been much research done on the neurohormonal control of the post-feeding diuresis in the blood-feeding hemipteran, Rhodnius prolixus, little is known about the control of the post-feeding diuresis in O. fasciatus. One of the neurohormones that may play a role in this rapid diuresis belongs to the calcitonin-like diuretic hormone (DH31) family of insect peptides. In this study we demonstrate the presence of DH31-like immunoreactivity in the central nervous system (CNS) and gut of O. fasciatus 5th instars. As well, DH31-like material was quantified and partially purified from the CNS of 5th instar O. fasciatus using reversed-phase liquid chromatography (RPLC) and monitored with an enzyme-linked immunosorbent assay (ELISA). When tested on O. fasciatus 5th instar Malpighian tubules, DH31-like peptides significantly increased the rate of secretion over saline controls. The results suggest that there is a DH31-like peptide(s) present in the CNS of O. fasciatus and that this peptide may play a role in the control of Malpighian tubule secretion.

A new vibration isolation bed stage with magnetorheological dampers for ambulance vehicles

International Nuclear Information System (INIS)

Chae, Hee Dong; Choi, Seung-Bok

2015-01-01

The vibration experienced in an ambulance can lead to secondary injury to a patient and discourage a paramedic from providing emergency care. In this study, with the goal of resolving this problem, a new vibration isolation bed stage associated with magnetorheological (MR) dampers is proposed to ensure ride quality as well as better care for the patient while he/she is being transported. The bed stage proposed in this work can isolate vibrations in the vertical, rolling and pitching directions to reflect the reality that occurs in the ambulance. Firstly, an appropriate-sized MR damper is designed based on the field-dependent rheological properties of MR fluid, and the damping force characteristics of a MR damper are evaluated as a function of the current. A mechanical model of the proposed vibration isolation bed stage is then established to derive the governing equations of motion. Subsequently, a sliding mode controller is formulated to control the vibrations caused from the imposed excitation signals; those signals are directly measured using a real ambulance subjected to bump-and-curve road conditions. Using the controller based on the dynamic motion of the bed stage, the vibration control performance is evaluated in both the vertical and pitch directions. It is demonstrated that the magnitude of the vibration in the patient compartment of the ambulance can be significantly reduced by applying an input current to the MR dampers installed for the new bed stage. (technical note)

Commercial-biological characteristics of tulka (Clupeonella cultriventris Nordmann, 1840 of the Dnieper-Bug estuary system

Directory of Open Access Journals (Sweden)

K. Geina

2017-12-01

Full Text Available Purpose. To give biological assessment of the commercial stock of tulka Clupeonella cultriventris (Nordmann, 1840 of the Dnieper-Bug estuary system in the conditions of the reduced Dnieper flow. Methodology. Analysis of the biological state of the tulka stock of the Dnieper-Bug estuary system was performed based on the data on the dynamics of its age structure, linear-weight growth and condition factor. Primary materials were obtained from scientific and commercial catches done during the current century. Field and laboratory processing of the ichthyological materials were performed according to generally accepted methods. Findings. Current commercial fishery situation in the Dnieper-Bug estuary system is characterized by reduced intensity of tulka harvest. Currently, major fish harvest is concentrated in the Mykolaiv fishing ground. As a result of continuous underfishing, a gradual growth of the mean weighed age of the tulka stock is observed with the accumulation of maximum groups of the right wing of the age series. At the beginning of the study (2001-2004, when age group was represented by three groups, the nucleus of the population was formed by age-1 and age-2 fish – 95.7%. However, last years, due to an increase in the number of age-4 fish, a reduction in the percentage of modal groups (age-1 and ahe-2 fish to 76.7% was observed. At the same time, the share of age-3 and age-4 fish gradually increased from 15.8% in 2013 to 23.2% in 2017. Against the background of a relatively instable age structure, the linear growth and body weight growth rates did not change significantly. The highest variability of linear parameters was observed in age-1 fish. With a mean body length of 40.55±0.53 mm (lim=36.2-45.2 mm, deviations from the modal value (Cv were 5.10%. With an increase in the age, the linear growth rate decreased and no significant variability was observed. The highest variability of body weight was typical for age-1 and age-2 fish (Cv

High temperature degradation by erosion-corrosion in bubbling fluidized bed combustors

Directory of Open Access Journals (Sweden)

Hou Peggy

2004-01-01

Full Text Available Heat-exchanger tubes in fluidized bed combustors (FBCs often suffer material loss due to combined corrosion and erosion. Most severe damage is believed to be caused by the impact of dense packets of bed material on the lower parts of the tubes. In order to understand this phenomenon, a unique laboratory test rig at Berkeley was designed to simulate the particle hammering interactions between in-bed particles and tubes in bubbling fluidized bed combustors. In this design, a rod shaped specimen is actuated a short distance within a partially fluidized bed. The downward specimen motion is controlled to produce similar frequencies, velocities and impact forces as those experienced by the impacting particle aggregates in practical systems. Room temperature studies have shown that the degradation mechanism is a three-body abrasion process. This paper describes the characteristics of this test rig, reviews results at elevated temperatures and compares them to field experience. At higher temperatures, deposits of the bed material on tube surfaces can act as a protective layer. The deposition depended strongly on the type of bed material, the degree of tube surface oxidation and the tube and bed temperatures. With HCl present in the bed, wastage was increased due to enhanced oxidation and reduced oxide scale adherence.

Controlling thermal properties of dense gas fluidized beds for concentrated solar power by internal and external solids circulation

Science.gov (United States)

Ammendola, Paola; Bareschino, Piero; Chirone, Riccardo; Salatino, Piero; Solimene, Roberto

2017-06-01

Fluidization technology displays a long record of success stories, mostly related to applications to thermal and thermochemical processes, which are fostering extension to novel and relatively unexplored fields. Application of fluidized beds to collection and thermal storage of solar radiation in Concentrated Solar Power (CSP) is one of the most promising, a field which poses challenging issues and great opportunities to fluidization scientists and technologists. The potential of this growing field calls for reconsideration of some of the typical design and operation guidelines and criteria, with the goal of exploiting the inherently good thermal performances of gas-fluidized beds at their best. "Creative" and non-conventional design and operation of fluidized beds, like those based on internal and external solids circulation, may be beneficial to the enhancement of thermal diffusivity and surface-to-bed heat transfer, improving the potential for application in the very demanding context of CSP with thermal energy storage. This paper investigated: i) a fluidized bed configuration with an uneven distribution of the fluidizing gas to promote vortices in the scale of bed height (internal solids circulation); ii) a dual fluidized bed configuration characterized by an external solids circulation achieved by the operation of a riser and a bubbling fluidized bed. CFD simulations showed the hydrodynamics conditions under which the internal solids circulation was established. The hydrodynamic characterization of the external solids circulation was achieved by an experimental study carried out with different cold models. The dual fluidized bed system was optimized in terms of operating conditions and geometrical features of the connections between two fluidized beds.

Intensive Exercise Training During Bed Rest Attenuates Deconditioning

Science.gov (United States)

Greenleaf, John E.

1997-01-01

Intensive exercise training during bed rest attenuates deconditioning. Med. Sci. Sports Exerc., Vol. 29, No. 2, pp. 207-215, 1997. A 30-d 6 deg head-down bed rest project was conducted to evaluate variable high-intensity, short-duration, isotonic cycle ergometer exercise (ITE) training and high-intensity intermittent resistive isokinetic exercise (IKE) training regimens designed to maintain peak VO2 and muscle mass, strength, and endurance at ambulatory control levels throughout prolonged bed rest. Other elements of the deconditioning (adaptive) syndrome, such as proprioception, psychological performance, hypovolemia, water balance, body composition, and orthostatic tolerance, were also measured. Major findings are summarized in this paper. Compared with response during bed rest of the no exercise (NOE) control group: the ITE training regimen (a) maintained work capacity (peak VO2), (b) maintained plasma and red cell volumes, (c) induced positive body water balance, (d) decreased quality of sleep and mental concentration, and (e) had no effect on the decrease in orthostatic tolerance; the IKE training regimen (f) attenuated the decrease in peak VO2 by 50%, (g) attenuated loss of red cell volume by 40% but had no effect on loss of plasma volume, (b) induced positive body water balance, (i) had no adverse effect on quality of sleep or concentration, and 0) had no effect on the decrease in orthostatic tolerance. These findings suggest that various elements of the deconditioning syndrome can be manipulated by duration and intensity of ITE or IKE training regimens and that several different training protocols will be required to maintain or restore physiological and psychological performance of individuals confined to prolonged bed rest.

Recovery strategies for fluxes affected by the Gill-Solent WindMaster-Pro "w-boost" firmware bug

Science.gov (United States)

Billesbach, D. P.; Chan, S. W.; Biraud, S.; David, C. R.

2017-12-01

In late 2015 and early 2016, work done by the AmeriFlux Tech Team helped to uncover a bug in the Gill WindMaster Pro sonic anemometers used by many researchers for eddy covariance flux measurements. Gill has addressed this issue and has since sent out a notice that the vertical wind speed component (a critical piece of all eddy covariance fluxes) was being erroneously computed and reported. The problem (known as the w-boost bug) resulted in positive (upward) wind speeds being under-reported by 16.6% and negative (downward) wind speeds being under-reported by 28.9%. This has the potential to cause similar underestimates in fluxes obtained from these instruments. While the manufacturer has offered a firmware upgrade to fix this bug, there exist many data sets that have already been affected by it. Researchers who use the affected units have contributed to numerous data archives (AmeriFlux, FluxNet, ICOS, etc.), and third-party scientists have, in turn used these data in many types of research projects. The volume of affected data over such a long period of time makes a complete reprocessing of the raw data sets impractical. To address this, the AmeriFlux Tech Team has endeavored to develop a method of correcting affected fluxes using only the downloadable data sets that are available from these archives. In a previous poster, we reported preliminary results from a pair of Arctic tundra flux towers, and showed that fluxes could be underestimated by 15% to 20%. In this poster, we present results that extend our study to include a forested site in Equatorial Africa. We also have evaluated methods to estimate flux errors without accessing the raw data sets.

Bedding material affects mechanical thresholds, heat thresholds and texture preference

Science.gov (United States)

Moehring, Francie; O’Hara, Crystal L.; Stucky, Cheryl L.

2015-01-01

It has long been known that the bedding type animals are housed on can affect breeding behavior and cage environment. Yet little is known about its effects on evoked behavior responses or non-reflexive behaviors. C57BL/6 mice were housed for two weeks on one of five bedding types: Aspen Sani Chips® (standard bedding for our institute), ALPHA-Dri®, Cellu-Dri™, Pure-o’Cel™ or TEK-Fresh. Mice housed on Aspen exhibited the lowest (most sensitive) mechanical thresholds while those on TEK-Fresh exhibited 3-fold higher thresholds. While bedding type had no effect on responses to punctate or dynamic light touch stimuli, TEK-Fresh housed animals exhibited greater responsiveness in a noxious needle assay, than those housed on the other bedding types. Heat sensitivity was also affected by bedding as animals housed on Aspen exhibited the shortest (most sensitive) latencies to withdrawal whereas those housed on TEK-Fresh had the longest (least sensitive) latencies to response. Slight differences between bedding types were also seen in a moderate cold temperature preference assay. A modified tactile conditioned place preference chamber assay revealed that animals preferred TEK-Fresh to Aspen bedding. Bedding type had no effect in a non-reflexive wheel running assay. In both acute (two day) and chronic (5 week) inflammation induced by injection of Complete Freund’s Adjuvant in the hindpaw, mechanical thresholds were reduced in all groups regardless of bedding type, but TEK-Fresh and Pure-o’Cel™ groups exhibited a greater dynamic range between controls and inflamed cohorts than Aspen housed mice. PMID:26456764

Supporting Early Childhood Educators' Use of Embedded Communication Strategies by Providing Feedback via Bug-in-Ear Technology

Science.gov (United States)

Riggie, Jennifer

2013-01-01

The purpose of this study was to examine the relationship between coaching provided with bug-in-ear technology, the frequency of the early childhood educators' use of targeted communication strategies and children's expressive communication. Four multiple-baseline single-case design experiments were completed to evaluate these relationships.…

Effects of Artificial Gravity and Bed Rest on Spatial Orientation and Balance Control

Science.gov (United States)

Paloski, William H.; Moore, S. T.; Feiveson, A. H.; Taylor, L. C.

2007-01-01

While the vestibular system should be well-adapted to bed rest (a condition it experiences approximately 8/24 hrs each day), questions remain regarding the degree to which repeated exposures to the unusual gravito-inertial force environment of a short-radius centrifuge might affect central processing of vestibular information used in spatial orientation and balance control. Should these functions be impaired by intermittent AG, its feasibility as a counter-measure would be diminished. We, therefore, examined the effects of AG on spatial orientation and balance control in 15 male volunteers before and after 21 days of 6 HDT bed rest (BR). Eight of the subjects were treated with daily 1hr AG exposures (2.5g at the feet; 1.0g at the heart) aboard a short radius (3m) centrifuge, while the other seven served as controls (C). Spatial orientation was assessed by measures of ocular counter-rolling (OCR; rotation of the eye about the line of sight, an otolith-mediated reflex) and subjective visual vertical (SVV; perception of the spatial upright). Both OCR and SVV measurements were made with the subject upright, lying on their left sides, and lying on their right sides. OCR was measured from binocular eye orientation recordings made while the subjects fixated for 10s on a point target directly in front of the face at a distance of 1 m. SVV was assessed by asking subjects (in the dark) to adjust to upright (using a handheld controller) the orientation of a luminous bar randomly perturbed (15) to either side of the vertical meridian. Balance control performance was assessed using a computerized dynamic posturography (CDP) protocol similar to that currently required for all returning crew members. During each session, the subjects completed a combination of trials of sensory organization test (SOT) 2 (eyes closed, fixed platform) and SOT 5 (eyes closed, sway-referenced platform) with and without static and dynamic pitch plane head movements (plus or minus 20 deg., dynamic

Investigation of Gas Solid Fluidized Bed Dynamics with Non-Spherical Particles

Energy Technology Data Exchange (ETDEWEB)

Choudhuri, Ahsan [Univ. of Texas, El Paso, TX (United States). Dept. of Mechanical Engineering

2013-06-30

One of the largest challenges for 21st century is to fulfill global energy demand while also reducing detrimental impacts of energy generation and use on the environment. Gasification is a promising technology to meet the requirement of reduced emissions without compromising performance. Coal gasification is not an incinerating process; rather than burning coal completely a partial combustion takes place in the presence of steam and limited amounts of oxygen. In this controlled environment, a chemical reaction takes place to produce a mixture of clean synthetic gas. Gas-solid fluidized bed is one such type of gasification technology. During gasification, the mixing behavior of solid (coal) and gas and their flow patterns can be very complicated to understand. Many attempts have taken place in laboratory scale to understand bed hydrodynamics with spherical particles though in actual applications with coal, the particles are non-spherical. This issue drove the documented attempt presented here to investigate fluidized bed behavior using different ranges of non-spherical particles, as well as spherical. For this investigation, various parameters are controlled that included particle size, bed height, bed diameter and particle shape. Particles ranged from 355 µm to 1180 µm, bed diameter varied from 2 cm to 7 cm, two fluidized beds with diameters of 3.4 cm and 12.4 cm, for the spherical and non-spherical shaped particles that were taken into consideration. Pressure drop was measured with increasing superficial gas velocity. The velocity required in order to start to fluidize the particle is called the minimum fluidization velocity, which is one of the most important parameters to design and optimize within a gas-solid fluidized bed. This minimum fluidization velocity was monitored during investigation while observing variables factors and their effect on this velocity. From our investigation, it has been found that minimum fluidization velocity is independent of bed

Experimental study of flow field characteristics on bed configurations in the pebble bed reactor

International Nuclear Information System (INIS)

Jia, Xinlong; Gui, Nan; Yang, Xingtuan; Tu, Jiyuan; Jia, Haijun; Jiang, Shengyao

2017-01-01

Highlights: • PTV study of flow fields of pebble bed reactor with different configurations are carried out. • Some criteria are proposed to quantify vertical velocity field and flow uniformity. • The effect of different pebble bed configurations is also compared by the proposed criteria. • The displacement thickness is used analogically to analyze flow field characteristics. • The effect of mass flow variation in the stagnated region of the funnel flow is measured. - Abstract: The flow field characteristics are of fundamental importance in the design work of the pebble bed high temperature gas cooled reactor (HTGR). The different effects of bed configurations on the flow characteristics of pebble bed are studied through the PTV (Particle Tracking Velocimetry) experiment. Some criteria, e.g. flow uniformity (σ) and mass flow level (α), are proposed to estimate vertical velocity field and compare the bed configurations. The distribution of the Δθ (angle difference between the individual particle velocity and the velocity vector sum of all particles) is also used to estimate the resultant motion consistency level. Moreover, for each bed configuration, the thickness of displacement is analyzed to measure the effect of the funnel flow zone based on the boundary layer theory. Detailed information shows the quantified characteristics of bed configuration effects on flow uniformity and other characteristics; and the sequence of levels of each estimation criterion is obtained for all bed configurations. In addition, a good design of the pebble bed configuration is suggested and these estimation criteria can be also applied and adopted in testing other geometry designs of pebble bed.

Effect of 2 Bedding Materials on Ammonia Levels in Individually Ventilated Cages.

Science.gov (United States)

Koontz, Jason M; Kumsher, David M; Kelly, Richard; Stallings, Jonathan D

2016-01-01

This study sought to identify an optimal rodent bedding and cage-change interval to establish standard procedures for the IVC in our rodent vivarium. Disposable cages were prefilled with either corncob or α-cellulose bedding and were used to house 2 adult Sprague-Dawley rats (experimental condition) or contained no animals (control). Rats were observed and intracage ammonia levels measured daily for 21 d. Intracage ammonia accumulation became significant by day 8 in experimental cages containing α-cellulose bedding, whereas experimental cages containing corncob bedding did not reach detectable levels of ammonia until day 14. In all 3 experimental cages containing α-cellulose, ammonia exceeded 100 ppm (our maximum acceptable limit) by day 11. Two experimental corncob cages required changing at days 16 and 17, whereas the remaining cage containing corncob bedding lasted the entire 21 d without reaching the 100-ppm ammonia threshold. These data suggests that corncob bedding provides nearly twice the service life of α-cellulose bedding in the IVC system.

Comparison of Ocular Outcomes in Two 14-Day Bed Rest Studies

Science.gov (United States)

Cromwell, R. L.; Zanello, S. B.; Yarbough, P. O.; Taibbi, G.; Vizzeri, G.

2011-01-01

Reports of astronauts visual changes raised concern about ocular health during long-duration spaceflight. Some of these findings included hyperopic shifts, choroidal folds, optic disc edema, retinal nerve fiber layer (RNFL) thickening, and cotton wool spots. While the etiology remains unknown, hypotheses speculate that hypertension in the brain caused by cephalad fluid shifts during spaceflight is a possible mechanism for these ocular changes. Head-down tilt (HDT) bed rest is a spaceflight analog that induces cephalad fluid shifts. In addition, previous studies of the HDT position demonstrated body fluid shifts associated with changes in intraocular pressure (IOP). For these reasons, vision monitoring of HDT bed rest subjects was implemented for NASA bed rest studies. Subjects selected for these studies were healthy adults (14 males and 5 females). Average age was 37.5 plus or minus 9.1 years, weight was 77.4 plus or minus 11.3 Kg, and height was 173.4 plus or minus 7.2 14 cm. Controlled conditions followed for all NASA bed rest studies were implemented. These conditions included factors such as eating a standardized diet, maintaining a strict sleep wake cycle, and remaining in bed for 24 hours each day. In one study, subjects maintained a horizontal (0 degree) position while in bed and were exercised six days per week with an integrated resistance and aerobic training (iRAT) program. In the other study, subjects were placed at 6 degrees HDT while in bed and did not engage in exercise. All subjects underwent pre- and post bed rest vision testing. While the battery of vision tests for each study was not identical, measures common to both studies will be presented. These measures included IOP and measures that provided an indication of optic disc swelling as derived from optical coherence tomography (OCT) testing: average retinal nerve fiber layer (RNFL) thickness (millimeters), disc area (square millimeters), rim area (square millimters), and average cup to disc (C