WorldWideScience

Sample records for bearing nci-460 lung

  1. Inhibition of lymphangiogenesis, nodal and lung metastasis by dihydroartemisinin in mice bearing Lewis lung carcinoma

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective: To investigate the activity of anti-malarial dihydroartemisinin (DHA) on tumor growth, lymphangiogenesis, nodal and lung metastasis and survival in mice bearing Lewis lung carcimoma (LLC). Methods: The models of C57BL/6 mice transplantation tumors were established via subcutaneous injection of LLC cells and divided into 4 groups: control group, DHA group, DHA + ferrous sulfate (FS) group and FS group, with 25 mice in each group. Tumor volumes and weights, nodal and lung metastasis, and survival were monitored. Tumor lymphatic microvessel density (LMVD) was determined by lymphatic vessel endothelial hyaluronan receptor-1 (LYVE-1) immnohistochemistry. After LLC cells were treated with DHA or DHA + FS, protein and mRNA levels of vascular endothelial growth factor (VEGF) -C were evaluated by Western blotting and real time quantitative RT-PCR, respectively. Results: Oral administration of DHA or DHA+FS inhibited lymph node and lung metastasis, and prolonged survival. However, no significant tumor growth retardation effect was observed when mice were treated with DHA alone. The inhibited tumor metastasis was related to the decreased LMVD in the peritumoral regions, but not in the in-tratumoral regions. DHA significantly down-regulated the expression of VEGF-C protein and mRNA in LLC cells. Conclusion; DHA effectively inhibits LLC transplantation tumor lymphangiogenesis, nodal and lung metastasis, and may be a promising chemotherapeutic agent for controlling lung cancer metastasis by decreasing VEGF-C expression.

  2. Curcumin reduces trabecular and cortical bone in naive and Lewis lung carcinoma-bearing mice

    Science.gov (United States)

    The present study investigated the effects of dietary supplementation with curcumin on bone microstructural changes in female C57BL/6 mice in the presence or absence of Lewis lung carcinoma. Morphometric analysis showed that in tumor-bearing mice curcumin at 2% and 4% dietary levels (w/w) significa...

  3. Bear

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The famous physicist made for his scholars this riddle. A fellow encountered a bear in a wasteland. There was nobody else there. Both were frightened and ran away. Fellow to the north, bear to the west. Suddenly the fellow stopped, aimed his gun to the south and shot the bear. What colour was the bear?

  4. Experimental study of radiotargeting-therapy with small molecular polypeptide in nude mice bearing lung adenocarcinoma

    International Nuclear Information System (INIS)

    Background: Integrin signal transduction pathways provide an important basis for molecular targeting therapy of cancer in tumor growth, infiltration and transfer. Existing research data have shown that small molecular peptide labeled with radionuclide has good clinical application prospects, but the successful researches on lung cancer have not been reported so far. It is considered that the main reason is the lack of small molecule peptide for specific targeting lung cancer. Purpose: Based on the small molecular peptide cNGQGEQc for specifically identifying integrin α3 and β1 found previously, polypeptide cNGQGEQc is selected and radiolabelled with 131I. And the inhibitory effect of 131I-cNGQGEQc in nude mice bearing lung adenocarcinoma is observed. Methods: The coupling of cNGQGEQc and tyrosine was done in the processing of solid phase synthesis of small molecular peptide. Chloramine-T method was used for radiolabelling of cNGQGEQc with 131I. Twenty nude mice bearing NCI-H1975 were built and randomly divided into four groups with five mice in each group, including the group of 131I-cNGQGEQc, the group of 131I-cNAQAEQc, the group of 131I and the saline control group. The general condition was observed in nude mice bearing tumor after tail vein injection of corresponding drugs. And the tumor sizes after grafting were measured per 3 days in 30 days. The inhibitory rate of tumor in each group was calculated. Results: The labeling efficiencies of 131I-cNGQGEQc and 131I-cNAQAEQc were greater than 90% with the radiochemical purity of more than 95%, and 131I-cNGQGEQc had obvious inhibitory effect for transplantation tumor in nude mice bearing NCI-H1975 adenocarcinoma of lung. After a treatment for 30 days the tumor inhibitory rates were 60.93% for the group of 131I-cNGQGEQc, 11.63% for the group of 131I-cNAQAEQ and 10.70% for the group of 131I. Conclusion: 131I-cNGQGEQC has a good affinity and effective inhibit effect for the NCI-H1975 lung adenocarcinoma. Integrin is

  5. Reliability and minimal detectable change of the weight-bearing lunge test: A systematic review.

    Science.gov (United States)

    Powden, Cameron J; Hoch, Johanna M; Hoch, Matthew C

    2015-08-01

    Ankle dorsiflexion range of motion (DROM) is often a point of emphasis during the rehabilitation of lower extremity pathologies. With the growing popularity of weight-bearing DROM assessments, several versions of the weight-bearing lunge (WBLT) test have been developed and numerous reliability studies have been conducted. The purpose of this systematic review was to critically appraise and synthesize the studies which examined the reliability and responsiveness of the WBLT to assess DROM. A systematic search of PubMed and EBSCO Host databases from inception to September 2014 was conducted to identify studies whose primary aim was assessing the reliability of the WBLT. The Quality Appraisal of Reliability Studies assessment tool was utilized to determine the quality of included studies. Relative reliability was examined through intraclass correlation coefficients (ICC) and responsiveness was evaluated through minimal detectable change (MDC). A total of 12 studies met the eligibility criteria and were included. Nine included studies assessed inter-clinician reliability and 12 included studies assessed intra-clinician reliability. There was strong evidence that inter-clinician reliability (ICC = 0.80-0.99) as well as intra-clinician reliability (ICC = 0.65-0.99) of the WBLT is good. Additionally, average MDC scores of 4.6° or 1.6 cm for inter-clinician and 4.7° or 1.9 cm for intra-clinician were found, indicating the minimal change in DROM needed to be outside the error of the WBLT. This systematic review determined that the WBLT, regardless of method, can be used clinically to assess DROM as it provides consistent results between one or more clinicians and demonstrates reasonable responsiveness. PMID:25704110

  6. Impact of fractionated local irradiation on lung metastasis in H22-bearing mice and exploration of its mechanism

    International Nuclear Information System (INIS)

    Objective: To study the impact of local fractionated irradiation on lung metastasis in H22-bearing ice, and to explore its mechanism involved. Methods: Subcutaneous transplantation tumor model bearing with H22 was established. Mice were divided into three groups as healthy control, tumor control and irradiation groups. The size of subcutaneous tumors was measured and lung metastasis was observed. The expressions of PCNA, VEGF and MVD were detected immunohistochemically. The plasma levels of CD4 and CD8 were determined by using flow cytometry. Results: The tumor size in irradiated group was smaller than that in tumor control group. The tumor inhibition rate in irradiated group was 30%. Lung metastasis in irradiated group was more severe than that in tumor control group (χ2=8.31, 4.48, 9.60, P<0.05). The expressions of PCNA, VEGF and MVD in two groups were statistically different (t=23.78, -2.47, -6.43, P<0.05). The levels of CD4 and CD8 in irradiated group were statistically different compared to healthy control group (t=4.72 and 3.31, P<0.05). Conclusions: For the H22 model, radiation might inhibit the local transplantation tumor, but increase the risk of lung metastasis. (authors)

  7. Antitumor activity and systemic effects of PVM/MA-shelled selol nanocapsules in lung adenocarcinoma-bearing mice

    Science.gov (United States)

    de Souza, Ludmilla Regina; Alexandre Muehlmann, Luis; Carneiro Matos, Lívia; Simón-Vázquez, Rosana; Guerreiro Marques Lacava, Zulmira; Maurício Batista De-Paula, Alfredo; Mosiniewicz-Szablewska, Ewa; Suchocki, Piotr; César Morais, Paulo; González-Fernández, África; Nair Báo, Sônia; Bentes Azevedo, Ricardo

    2015-12-01

    Selol is a semi-synthetic compound containing selenite that is effective against cancerous cells and safer for clinical applications in comparison with other inorganic forms of selenite. Recently, we have developed a formulation of poly(methyl vinyl ether-co-maleic anhydride)-shelled selol nanocapsules (SPN), which reduced the proliferative activity of lung adenocarcinoma cells and presented little deleterious effects on normal cells in in vitro studies. In this study, we report on the antitumor activity and systemic effects induced by this formulation in chemically induced lung adenocarcinoma-bearing mice. The in vivo antitumor activity of the SPN was verified by macroscopic quantification, immunohistochemistry and morphological analyses. Toxicity analyses were performed by evaluations of the kidney, liver, and spleen; analyses of hemogram and plasma levels of alanine aminotransferase, aspartate transaminase, urea, and creatinine; and DNA fragmentation and cell cycle activity of the bone marrow cells. Furthermore, we investigated the potential of the SPN formulation to cause hemolysis, activate the complement system, provoke an inflammatory response and change the conformation of the plasma proteins. Our results showed that the SPN reduced the area of the surface tumor nodules but not the total number of tumor nodules. The biochemical and hematological findings were suggestive of the low systemic toxicity of the SPN formulation. The surface properties of the selol nanocapsules point to characteristics that are consistent with the treatment of the tumors in vivo: low hemolytic activity, weak inflammatory reaction with no activation of the complement system, and mild or absent conformational changes of the plasma proteins. In conclusion, this report suggests that the SPN formulation investigated herein exhibits anti-tumoral effects against lung adenocarcinoma in vivo and is associated with low systemic toxicity and high biocompatibility.

  8. Enhanced efficacy of radiation-induced gene therapy in mice bearing lung adenocarcinoma xenografts using hypoxia responsive elements

    International Nuclear Information System (INIS)

    The aim of the present study was to investigate whether the hypoxia responsive element (HRE) could be used to enhance suicide gene (HSV-tk) expression and tumoricidal activity in radiation-controlled gene therapy of human lung adenocarcinoma xenografts. A chimeric promoter, HRE-Egr, was generated by directly linking a 0.3-kb fragment of HRE to a 0.6-kb human Egr-1 promoter. Retroviral vectors containing luciferase or the HSV-tk gene driven by Egr-1 or HRE-Egr were constructed. A human adenocarcinoma cell line (A549) was stably transfected with the above vectors using the lipofectamine method. The sensitivity of transfected cells to prodrug ganciclovir (GCV) and cell survival rates were analyzed after exposure to a dose of 2 Gy radiation and hypoxia (1%). In vivo, tumor xenografts in BALB/c mice were transfected with the constructed retroviruses and irradiated to a total dose of 6 Gy, followed by GCV treatment (20 mg/kg for 14 days). When the HSV-tk gene controlled by the HRE-Egr promoter was introduced into A549 cells by a retroviral vector, the exposure to 1% O2 and 2 Gy radiation induced significant enhancement of GCV cytotoxicity to the cells. Moreover, in nude mice bearing solid tumor xenografts, only the tumors infected with the hybrid promoter-containing virus gradually disappeared after GCV administration and radiation. These results indicate that HRE can enhance transgene expression and tumoricidal activity in HSV-tk gene therapy controlled by ionizing radiation in hypoxic human lung adenocarcinoma. (author)

  9. Anti-tumor effect of repeated low dose of pEgr-IFN γ-Endostatin gene-radiotherapy on mice bearing lewis lung carcinoma

    International Nuclear Information System (INIS)

    Objective: To study the anti-tumor effect of repeated low dose pEgr-IFN γ-Endostatin gene-radiotherapy on mice bearing Lewis lung carcinoma. Methods: Mice bearing Lewis lung carcinoma were divided randomly into control, 10 Gy, 4 x 2.5 Gy, 4 x P, P + 10 Gy and 4 x (P + 2.5 Gy) group. The pEgr-IFN γ-Endostatin plasmid packaged with liposome was injected into tumors which were irradiated by X-ray 36 h later. Tumor growth rates at different time were observed after gene-radiotherapy. Number of lung metastatic nodes and tumor weight of the mice were detected 18 d after gene-radiotherapy. Results: Tumor growth rate of the mice in gene-radiotherapy for four-time group was significantly lower than that for only once group 12-18 d after gene-radiotherapy. Number of lung metastatic nodes and tumor weight of the mice in gene-radiotherapy for four-time group were significantly lower than those for only once group 18 d after gene-radiotherapy. Conclusion: Anti-tumor effect of repeated low dose pEgr- IFN γ-Endostatin gene-radiotherapy is better than that of high dose for only once. (authors)

  10. Procoagulant, tissue factor-bearing microparticles in bronchoalveolar lavage of interstitial lung disease patients: an observational study.

    Directory of Open Access Journals (Sweden)

    Federica Novelli

    Full Text Available Coagulation factor Xa appears involved in the pathogenesis of pulmonary fibrosis. Through its interaction with protease activated receptor-1, this protease signals myofibroblast differentiation in lung fibroblasts. Although fibrogenic stimuli induce factor X synthesis by alveolar cells, the mechanisms of local posttranslational factor X activation are not fully understood. Cell-derived microparticles are submicron vesicles involved in different physiological processes, including blood coagulation; they potentially activate factor X due to the exposure on their outer membrane of both phosphatidylserine and tissue factor. We postulated a role for procoagulant microparticles in the pathogenesis of interstitial lung diseases. Nineteen patients with interstitial lung diseases and 11 controls were studied. All subjects underwent bronchoalveolar lavage; interstitial lung disease patients also underwent pulmonary function tests and high resolution CT scan. Microparticles were enumerated in the bronchoalveolar lavage fluid with a solid-phase assay based on thrombin generation. Microparticles were also tested for tissue factor activity. In vitro shedding of microparticles upon incubation with H₂O₂ was assessed in the human alveolar cell line, A549 and in normal bronchial epithelial cells. Tissue factor synthesis was quantitated by real-time PCR. Total microparticle number and microparticle-associated tissue factor activity were increased in interstitial lung disease patients compared to controls (84±8 vs. 39±3 nM phosphatidylserine; 293±37 vs. 105±21 arbitrary units of tissue factor activity; mean±SEM; p<.05 for both comparisons. Microparticle-bound tissue factor activity was inversely correlated with lung function as assessed by both diffusion capacity and forced vital capacity (r² = .27 and .31, respectively; p<.05 for both correlations. Exposure of lung epithelial cells to H₂O₂ caused an increase in microparticle-bound tissue factor

  11. The metabolic behaviour of uranium octoxide bearing residues after their deposition in the rat lung: the implications for occupational exposure

    International Nuclear Information System (INIS)

    This paper describes the metabolic behaviour in rats of uranium inhaled as a U3O8 bearing residue. The biokinetic behaviour of uranium in workers has been predicted by combining the transfer rates to blood in rats with mucociliary clearance rates obtained from human volunteers exposed to other aerosols. It is concluded that chest monitoring will be of value for assessing acute and chronic intakes of the residue below the proposed annual limit (6 x 103 Bq) whilst urinary excretion data should be interpreted with caution. (author)

  12. Lung

    International Nuclear Information System (INIS)

    At present no simple statement can be made relative to the role of radionuclidic lung studies in the pediatric population. It is safe to assume that they will be used with increasing frequency for research and clinical applications because of their sensitivity and ready applicability to the pediatric patient. Methods comparable to those used in adults can be used in children older than 4 years. In younger children, however, a single injection of 133Xe in solution provides an index of both regional perfusion and ventilation which is easier to accomplish. This method is particularly valuable in infants and neonates because it is rapid, requires no patient cooperation, results in a very low radiation dose, and can be repeated in serial studies. Radionuclidic studies of ventilation and perfusion can be performed in almost all children if the pediatrician and the nuclear medicine specialist have motivation and ingenuity. S

  13. Preparation of 99Tcm labeled survivin mRNA antisense PNA and gene imaging in nude mice bearing lung carcinoma A549 xenografts

    International Nuclear Information System (INIS)

    Objective: To prepare the 99Tcm-survivin mRNA antisense peptide nucleic acid (PNA)and investigate its value as a gene imaging agent in tumor bearing mice and early diagnosis in tumor. Methods: Survivin mRNA antisense PNA and mismatch PNA were synthesized. Four amino acids (Gly- (D)Ala-Gly-Gly) and Aba (4-aminobutyric acid) were linked to the 5' end of PNA. Gly- (D)Ala-Gly-Gly served as a chelating moiety for strong chelation of 99Tcm and Aba acted as a spacer to minimize the steric hindrance. PNAs were labeled with 99Tcm by the ligand-exchange method. The labeling efficiency and radiochemical purity were measured by HPLC and ITLC methods. There were five BALB/c nude mice bearing human lung carcinoma (A549) in each of antisense PNA and mismatch PNA groups. Gene imaging of 99Tcm-survivin mRNA antisense and mismatch PNAs were performed at 1, 2 and 4 h post the injection, respectively, and the T/NT ratio was measured by the method of ROI. The statistical comparisons of average values were performed with the two-group t-test for independent sample by SPSS 13.0. Results: The product kept stable in vitro. The labeling efficiency of 99Tcm-survivin mRNA antisense PNA was (95.48 ±1.92)% and more than 85% after the incubation for 24 h in serum. The radiochemical purity was >95%. The labeling efficiency of mismatch PNA was similar to the antisense PNA. 99Tcm-survivin mRNA antisense PNA was especially uptaken by tumor lesion, and its accumulation reached the top at 4 h post the injection. T/NT ratios at 1, 2, and 4 h were 2.70 ± 0.28, 3.44 ± 0.35,4.21 ± 0.63, respectively. In the comparison, the T/NT ratio of 99Tcm-survivin mRNA mismatch PNA at 4 h (3.12 ±0.50) was significantly lower (t=2.918, P=0.019). Conclusions: 99Tcm-survivin mRNA antisense PNA has high labeling efficiency,good stability and no need of purification. Its characteristic of especial uptake by tumor lesion provides the potential value in early diagnosis of tumor. (authors)

  14. The experimental study on anti-tumor effect of 131I-Tyr-octreotide in nude mice bearing human non-small cell lung cancer

    International Nuclear Information System (INIS)

    Objective: Radionuclide-labeled low molecular weight polypeptide is recently advocated for the diagnosis and treatment of malignant tumor. The purpose of this study was to evaluate the anti-tumor effect of 131I-Tyr-octreotide in nude mice bearing human non-small cell lung cancer (NSCLC). Methods: 131I-Tyr-octreotide was prepared by Ch-T method. The radiochemical purity was measured and biodistribution was evaluated. The nude mice models bearing human NSCLC were studied and divided into four groups: group A injected 131I-Tyr-octreotide through tail vein, group B injected normal saline, group C injected 131I-Tyr-octreotide through stroma and group D injected 131I through stroma. The radioactivity ratio of tumor to normal tis- sue (T/NT) was calculated over region of interest (ROI). The tumor cell cycle and cell apoptosis were analyzed by flow cytometry (FCM), terminal deoxynucleotidyl transferase mediated dUTP-biotion nick end labeling (TUNEL) and histopathological analysis. Statistical analysis was performed with SPSS 11.0, and the comparison for difference between groups performed with one-way ANOVA analysis. Results: The labeled radiochemical purity was (95.23 ± 1.67)% and specific activity of 3.5 x l06 Bq/μg. The biodistribution showed high uptake in kidney, and low uptake in liver and spleen. The radioactive uptake in group C was higher than the other groups, and the retention time was longer. The T/NT was 52.74 ± 0.13 after 24 h, which was much higher than that of the other groups (group D: 8.90 ± 0.23, group A: 6.42 ± 0.02, q=628.81 and 664.33, all P1 phase was blocked most remarkably in group C than the other groups [group C: (83.17 ± 6.86)%, group A: (57.02 ± 18.81)%, group D: (49.29 ± 7.80)%, group B: (45.88 ± 5.13)%, q=5.29, 6.86, 7.55, 1.56, 2.26, 0.69, all P131I-Tyr-octreotide was easily labeled by Ch-T. 131I-Tyr-octreotide could induce tumor cell apoptosis and inhibit the tumor cell of NSCLC. It might be a potential target-directed agent in

  15. A study of 131iodine-labeling of histamine-indomethacin: its in vivo therapeutic effect and anti-tumor mechanisms in Lewis-bearing lung cancer

    International Nuclear Information System (INIS)

    In our research,we study the effect of 131iodine-labeled histamine-indomethacin (131I-His-IN). We focus on its in vivo therapeutic effect and anti-tumor mechanisms in Lewis-bearing lung cancer. 131I-His-IN was administered by garage to the mice. At different timepoints, we made autoradiography (ARG) slices to observe the distribution of 131I-His-IN in the cellular, and the sliced samples underwent hematoxylin and eosin (HE) staining for observation of tumor necrosis. Before treatment, the groups of mice underwent 18F-fluorodeoxyglucose (18F-FDG) positron emission tomography-computed tomography (PET-CT) scans ,and they were then given physiologic saline, iodine 131 (131I), indomethacin (IN), Histamine-indomethacin (His-IN), and 131I-His-IN, respectively, three times daily for seven days. Seven days later, all the mice underwent 18F-FDG PET-CT scans again. We calculated the maximum standard uptake value (SUVmax) of the region of interest (ROI) and tumor inhibition rate at the same time. In ARG groups, black silver particle was concentrated in the nucleus and cytoplasm. 131I-His-IN mainly concentrated in tumor tissues. At 8 hours after 131I-His-IN, the radioactivity uptake in tumor tissue was higher than in other organs (F=3.46,P<0.05). For the 18F-FDG PET-CT imaging, the tumor tissus’es SUVmax of the ROI was lower compared to other groups after the treatment with 131I-His-IN. The tumor inhibitory rate (54.8%) in 131I-His-IN group was higher than in other groups, too. In the 131I-His-IN group the vascular endothelial growth factor (VEGF) decreased gradually compared to other groups. The tumor tissue necrotized obviously in 131I-His-IN group. Through these animal experiments, we found 131I-His-IN could inhibit the Lewis lung cancer cells. 131I-His-IN focused at the cell nucleus and cytoplasm. It could reduce VEGF and increase tumor inhibitory rate. At the same time, 18F-FDG PET-CT scan could be used for a curative effect and monitoring of disease prognosis

  16. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  17. Evaluation of self-emulsified DIM-14 in dogs for oral bioavailability and in Nu/nu mice bearing stem cell lung tumor models for anticancer activity.

    Science.gov (United States)

    Patel, Apurva R; Doddapaneni, Ravi; Andey, Terrick; Wilson, Heather; Safe, Stephen; Singh, Mandip

    2015-09-10

    3, 3-Diindolylmethane-14 (DIM-14), a novel lipophilic derivative of DIM, has demonstrated anticancer activity in different types of cancers. However, poor solubility and low oral bioavailability of DIM-14 limit its translational benefits in vivo. This study was carried out to improve the oral bioavailability of DIM-14 via self-emulsifying drug (SED) delivery system in dogs and to evaluate pharmacodynamic characteristics of SED against H1650 stem cell tumor models. DIM-14 was incorporated into an oil, surfactant, and co-surfactant mixture using labrafil and tween-80 to obtain SED. SED were characterized by droplet size, polydispersitiy index (PDI), zeta potential, entrapment efficiency (EE), in vitro permeability and drug release (investigated with Caco-2 monolayers and dissolution apparatus respectively). Pharmacokinetic parameters in dogs were evaluated and analyzed using Winonlin. Anti-tumor activity was carried out in H1650 lung tumor model. Particle size of SED was between 230 and 246 nm and surface charge was negative and ranged from 26.50 to 28.69 mV. Entrapment efficiency of SED was 85%. Pharmacokinetic evaluation in dogs showed increased Cmax (39.18 ± 7.34 vs 21.68 ± 6.3 μg·dL-1), higher AUC0-t (34,481.34 ± 1125.46 vs 14,159.53 ± 702.20 μg·min·dL-1) and improved absorption with 3 times more bioavailability of SED compared to DIM-14 solution. SED showed ~30-59% tumor volume/weight reduction in H1650 tumor model compared to DIM-P solution. Our studies demonstrate the potential application of self-emulsifying drug delivery system (SEDDS), that enhances oral absorption of DIM-14 and increased anti-tumor activity against lung tumor models. PMID:26079185

  18. Noninvasive Evaluation of Metabolic Tumor Volume in Lewis Lung Carcinoma Tumor-Bearing C57BL/6 Mice with Micro-PET and the Radiotracers 18F-Alfatide and 18F-FDG: A Comparative Analysis.

    Directory of Open Access Journals (Sweden)

    Yu-Chun Wei

    Full Text Available To explore the value of a new simple lyophilized kit for labeling PRGD2 peptide (18F-ALF-NOTA-PRGD2, denoted as 18F-alfatide in the determination of metabolic tumor volume (MTV with micro-PET in lewis lung carcinoma (LLC tumor-bearing C57BL/6 mice verified by pathologic examination and compared with those using 18F-fluorodeoxyglucose (FDG PET.All LLC tumor-bearing C57BL/6 mice underwent two attenuation-corrected whole-body micro-PET scans with the radiotracers 18F-alfatide and 18F-FDG within two days. 18F-alfatide metabolic tumor volume (VRGD and 18F-FDG metabolic tumor volume (VFDG were manually delineated slice by slice on PET images. Pathologic tumor volume (VPath was measured in vitro after the xenografts were removed.A total of 37 mice with NSCLC xenografts were enrolled and 33 of them underwent 18F-alfatide PET, and 35 of them underwent 18F-FDG PET and all underwent pathological examination. The mean ± standard deviation of VPath, VRGD, and VFDG were 0.59±0.32 cm3 (range,0.13~1.64 cm3, 0.61±0.37 cm3 (range,0.15~1.86 cm3, and 1.24±0.53 cm3 (range,0.17~2.20 cm3, respectively. VPath vs. VRGD, VPath vs. VFDG, and VRGD vs. VFDG comparisons were t = -0.145, P = 0.885, t = -6.239, P<0.001, and t = -5.661, P<0.001, respectively. No significant difference was found between VPath and VRGD. VFDG was much larger than VRGD and VPath. VRGD seemed more approximate to the pathologic gross tumor volume. Furthermore, VPath was more strongly correlated with VRGD (R = 0.964,P<0.001 than with VFDG (R = 0.584,P<0.001.18F-alfatide PET provided a better estimation of gross tumor volume than 18F-FDG PET in LLC tumor-bearing C57BL/6 mice.

  19. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  20. Bearing structures

    International Nuclear Information System (INIS)

    A hydrostatic bearing for the lower end of the vertical shaft of a sodium pump comprises a support shell encircling the shaft and a bush located between the shell and shaft. Liquid sodium is fed from the pump outlet to the bush/shaft and bush/shell interfaces to provide hydrostatic support. The bush outer surface and the shell inner surface are of complementary part-spherical shape and the bush floats relative to the shaft so that the bush can align itself with the shaft axis. Monitoring of the relative rotational speed of the bush with respect to the shaft (such rotation being induced by the viscous drag forces present) is also performed for the purposes of detecting abnormal operation of the bearing or partial seizure, at least one magnet is rotatable with the bush, and a magnetic sensor provides an output having a frequency related to the speed of the bush. (author)

  1. Tooling Converts Stock Bearings To Custom Bearings

    Science.gov (United States)

    Fleenor, E. N., Jr.

    1983-01-01

    Technique for reworking stock bearings saves time and produces helicopter-rotor bearings ground more precisely. Split tapered ring at one end of threaded bolt expands to hold inside of inner race bearing assembly; nut, at other end of bolt, adjusts amount of spring tension. Piece of hardware grasps bearing firmly without interfering with grinding operation. Operation produces bearing of higher quality than commercially available bearings.

  2. Interventional effect of cisplatin combined with fluoxetine on mice bearing Lewis lung cancer with depression%顺铂联合氟西汀对肺癌伴抑郁小鼠干预的研究

    Institute of Scientific and Technical Information of China (English)

    李密辉; 吴晓; 魏凯; 林燕华; 魏颖; 孙婧; 罗清莉; 刘宝君; 董竞成

    2015-01-01

    目的:通过顺铂联合氟西汀对肺癌伴抑郁小鼠进行干预,检测相关指标,观察氟西汀能否通过抗抑郁作用对肿瘤起到抑制作用。方法通过社交失败应激及皮下接种Lewis肺癌细胞株建立小鼠肺癌伴抑郁模型;ELISA方法检测血清皮质醇及IL-6水平;RT-PCR方法检测海马组织中脑源性神经营养因子( brain derived neuro-tropic factor,BDNF)mRNA表达;免疫组织化学方法检测肿瘤组织核转录因子-κB(nuclear factor-κB,NF-κB)及血管内皮生长因子( vascular endothelial growth factor ,VEGF)蛋白表达。结果双药组皮质醇与IL-6水平与模型组相比明显降低(P<0.05);双药组海马BDNF mRNA表达显著升高(P<0.05);双药组肿瘤重量、肿瘤组织中NF-κB及VEGF蛋白表达水平与单药组相比差异无显著性(P>0.05)。结论氟西汀能够降低肺癌伴抑郁小鼠血清皮质醇水平并促进海马组织BDNF mRNA表达而发挥抗抑郁作用,但并未发现其抗抑郁效果能够抑制肿瘤进展。%Objective To observe if fluoxetine has a potency to inhibit the progression of Lewis lung cancer by combining the fluoxetine and cisplatin to treat the mice bearing Lewis lung cancer with depression .Methods We devel-oped a mouse model of Lewis lung cancer with depression which was intervened with cisplatin and fluoxetine , and the indi-cators related to cancer and depression were tested .Social interaction test was used to measure the behavioral changes of the depressed model mice .The serum cortisol and IL-6, BDNF mRNA in the hippocampus , and NF-κB and VEGF in the tumor tissue were selected for investigation and comparison .Results The mice which were induced by social defeat exhib-ited social avoidance behavior in the social interaction test .The cortisol and IL-6 level in both combination groups was de-creased compared with that in the model group (P0.05).Conclusions Fluoxetine

  3. Lung Disease

    Science.gov (United States)

    ... ePublications > Our ePublications > Lung disease fact sheet ePublications Lung disease fact sheet This information in Spanish (en ... disease? More information on lung disease What is lung disease? Lung disease refers to disorders that affect ...

  4. Lung Emergencies

    Science.gov (United States)

    ... Emergencies Cardiac Emergencies Eye Emergencies Lung Emergencies Surgeries Lung Emergencies People with Marfan syndrome can be at ... should be considered an emergency. Symptoms of sudden lung collapse (pneumothorax) Symptoms of a sudden lung collapse ...

  5. Lung metastases

    Science.gov (United States)

    Metastases to the lung; Metastatic cancer to the lung ... Metastatic tumors in the lungs are cancers that developed at other places in the body (or other parts of the lungs) and spread through the ...

  6. Restoration of bearings

    Science.gov (United States)

    Parker, R. J.; Zaretsky, E. V.; Hanau, H.

    1977-01-01

    Process consisting of grinding raceways to oversize but original quality condition and installing new oversize balls or bearings restores wornout ball and roller bearings to original quality, thereby doubling their operating life. Evaluations reveal process results in restoration of 90% of replaced bearings at less than 50% of new-bearing costs.

  7. Passive magnetic bearing configurations

    Science.gov (United States)

    Post, Richard F.

    2011-01-25

    A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

  8. Maintenance Free Bearings

    OpenAIRE

    S. M. Muzakkir & Harish Hirani

    2015-01-01

    In the present research work the need of a Maintenance Free Bearings (MFB) is established. The paper presents preliminary friction calculations to highlight the ways to achieve maintenance free bearings. The existing technologies of well established maintenance free bearings are described. The hybridization of bearing technologies to achieve low cost maintenance free bearings has been exemplified. Finally a combination of passive magnetic repulsion and hydrodynamics ha...

  9. Collapsed Lung

    Science.gov (United States)

    A collapsed lung happens when air enters the pleural space, the area between the lung and the chest wall. If it is a ... is called pneumothorax. If only part of the lung is affected, it is called atelectasis. Causes of ...

  10. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...

  11. Lung density

    DEFF Research Database (Denmark)

    Garnett, E S; Webber, C E; Coates, G;

    1977-01-01

    The density of a defined volume of the human lung can be measured in vivo by a new noninvasive technique. A beam of gamma-rays is directed at the lung and, by measuring the scattered gamma-rays, lung density is calculated. The density in the lower lobe of the right lung in normal man during quiet...

  12. Lung Cancer

    Science.gov (United States)

    ... spreads in different ways, and each is treated differently. Non-small cell lung cancer is more common than small cell lung cancer. Small cell lung cancer grows more quickly and is more likely to spread to other organs in the body. Learn more about non-small cell lung cancer. Learn ...

  13. Bear Spray Safety Program

    Science.gov (United States)

    Blome, C.D.; Kuzniar, R.L.

    2009-01-01

    A bear spray safety program for the U.S. Geological Survey (USGS) was officially initiated by the Firearms Safety Committee to address accident prevention and to promote personnel training in bear spray and its transportation, storage, and use for defense against wild animals. Used as part of a system including firearms, or used alone for those who choose not to carry a firearm, bear spray is recognized as an effective tool that can prevent injury in a wild animal attack.

  14. Optimal Synchronizability of Bearings

    OpenAIRE

    Araújo, N. A. M.; Seybold, H.; Baram, R. M.; Herrmann, H. J.; Andrade, J. S.

    2013-01-01

    Bearings are mechanical dissipative systems that, when perturbed, relax toward a synchronized (bearing) state. Here we find that bearings can be perceived as physical realizations of complex networks of oscillators with asymmetrically weighted couplings. Accordingly, these networks can exhibit optimal synchronization properties through fine tuning of the local interaction strength as a function of node degree [Motter, Zhou, and Kurths, Phys. Rev. E 71, 016116 (2005)]. We show that, in analogy...

  15. Bearing restoration by grinding

    Science.gov (United States)

    Hanau, H.; Parker, R. J.; Zaretsky, E. V.; Chen, S. M.; Bull, H. L.

    1976-01-01

    A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

  16. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager;

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  17. Bearing fatigue investigation 3

    Science.gov (United States)

    Nahm, A. H.; Bamberger, E. N.; Signer, H. R.

    1982-01-01

    The operating characteristics of large diameter rolling-element bearings in the ultra high speed regimes expected in advanced turbine engines for high performance aircraft were investigated. A high temperature lubricant, DuPont Krytox 143 AC, was evaluated at bearing speeds to 3 million DN. Compared to the results of earlier, similar tests using a MIL-L-23699 (Type II) lubricant, bearings lubricated with the high density Krytox fluid showed significantly higher power requirements. Additionally, short bearing lives were observed when this fluid was used with AISI M50 bearings in an air atmosphere. The primary mode of failure was corrosion initiated surface distress (fatigue) on the raceways. The potential of a case-carburized bearing to sustain a combination of high-tangential and hertzian stresses without experiencing race fracture was also investigated. Limited full scale bearing tests of a 120 mm bore ball bearing at a speed of 25,000 rpm (3 million DN) indicated that a carburized material could sustain spalling fatigue without subsequent propagation to fracture. Planned life tests of the carburized material had to be aborted, however, because of apparent processing-induced material defects.

  18. Arcturus and the Bears

    Science.gov (United States)

    Antonello, E.

    2009-08-01

    Arcturus is the brightest star in Bootes. The ancient Greek name Arktouros means Bear Guard. The star, however, is not close to Ursa Maior (Big She-Bear) and Ursa Minor (Little She-Bear), as the name would suggest. This curious discrepancy could be explained by the star proper motion, assuming the name Bear Guard is a remote cultural heritage. The proper motion analysis could allow us to get an insight also into an ancient myth regarding Ursa Maior. Though we cannot explain scientifically such a myth, some interesting suggestions can be obtained about its possible origin, in the context of the present knowledge of the importance of the cult of the bear both during the Palaeolithic times and for several primitive populations of modern times, as shown by the ethnological studies.

  19. Lung Cancer

    Science.gov (United States)

    Lung cancer is one of the most common cancers in the world. It is a leading cause of ... in the United States. Cigarette smoking causes most lung cancers. The more cigarettes you smoke per day and ...

  20. Lung transplant

    Science.gov (United States)

    ... lung transplants are done at the same time (heart-lung transplant) if the heart is also diseased. ... people develop cancers or have problems with the heart. For most ... transplant. They have better exercise endurance and are able ...

  1. Lung transplant

    Science.gov (United States)

    ... diseases that may require a lung transplant are: Cystic fibrosis Damage to the arteries of the lung because ... BC; Clinical Practice Guidelines for Pulmonary Therapies Committee; Cystic Fibrosis Foundation Pulmonary Therapies Committee. Cystic fibrosis pulmonary guidelines: ...

  2. Lung scintigraphy

    International Nuclear Information System (INIS)

    A review of lung scintigraphy, perfusion scintigraphy with SPECT, lung ventilation SPECT, blood pool SPECT. The procedure of lung perfusion studies, radiopharmaceutical, administration and clinical applications, imaging processing .Results encountered and evaluation criteria after Biello and Pioped. Recommendations and general considerations have been studied about relation of this radiopharmaceutical with other pathologies

  3. Lung function

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    2005200 The effect of body position changes on lung function, lung CT imaging and pathology in an oleic acid induced acute lung injury model. JI Xin-ping (戢新平), et al. Dept Emergency, 1st Affili Hosp, China Med Univ, Shenyang 110001. Chin J Tuberc Respir Dis, 2005;28(1) :33-36. Objective: To study the effect of body position changes on lung mechanics, oxygenation, CT images and pathology in an oleic acid-induced acute lung injury (ALl) model. Methods: The study groups con-

  4. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  5. What Is Lung Cancer?

    Science.gov (United States)

    ... starts in the lungs, it is called lung cancer. Lung cancer begins in the lungs and may spread ... lung cancer. For more information, visit the National Cancer Institute’s Lung Cancer. Previous Basic Information Basic Information Basic Information ...

  6. Management recommendations: Bear River

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Bear River Migratory Bird Refuge, by a land use specialist. Recommendations, time frame and additional...

  7. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  8. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  9. My Little Teddy Bear

    Institute of Scientific and Technical Information of China (English)

    钱佳楠

    2005-01-01

    @@ As Valentine's Day came closer,every shop was full of colourful gifts such as cookies in the shape of heart, chocolates,Teddy Bears and so on.When I step into a shop on February 14th,I felt most lonely as I was alone.With mv eves fixed on a lovely Teddy Bear, I wished that someone could send me this stuffed toy.

  10. Climate Drives Polar Bear Origins

    Science.gov (United States)

    In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

  11. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  12. Blood Pump Bearing System

    Science.gov (United States)

    Aber, Gregory S. (Inventor)

    2000-01-01

    An apparatus is provided for a blood pump bearing system within a pump housing to support long-term highspeed rotation of a rotor with an impeller blade having a plurality of individual magnets disposed thereon to provide a small radial air gap between the magnets and a stator of less than 0.025 inches. The bearing system may be mounted within a flow straightener, diffuser, or other pump element to support the shaft of a pump rotor. The bearing system includes a zirconia shaft having a radiused end. The radiused end has a first radius selected to be about three times greater than the radius of the zirconia shaft. The radiused end of the zirconia shaft engages a flat sapphire endstone. Due to the relative hardness of these materials a flat is quickly produced during break-in on the zirconia radiused end of precisely the size necessary to support thrust loads whereupon wear substantially ceases. Due to the selection of the first radius, the change in shaft end-play during pump break-in is limited to a total desired end-play of less than about 0.010 inches. Radial loads are supported by an olive hole ring jewel that makes near line contact around the circumference of the Ir shaft to support big speed rotation with little friction. The width of olive hole ring jewel is small to allow heat to conduct through to thereby prevent heat build-up in the bearing. A void defined by the bearing elements may fill with blood that then coagulates within the void. The coagulated blood is then conformed to the shape of the bearing surfaces.

  13. 蒿甲醚与顺铂联用对Lewis肺癌小鼠的抑瘤作用及其机制探讨%The Inhibitory Effect and Mechanism of Artemether and Cisplatin on Lewise Lung Cancer Bearing C57BL/6J Mice

    Institute of Scientific and Technical Information of China (English)

    万成亮; 蒋永新; 寸英丽; 金从国; 陈晓群; 李佳

    2011-01-01

    Objective To study the anti-rumor effect and the mechanism of artemether and cisplatin on lung cancer bearing C57BL/6J mice. Methods C57BL/6J mice subcutaneously planted with 3LL lung cancer cell (4×105) were randomly divided into 6 groups; 1:NS group; 2:Artemether alone group; 3:Cisplatin alone group; 4:Artemether first and then use the eisplatin group; 5:Cisplatin first and then use the artemether group; 6:The same time give artemether and eisplatin group. The body weight changes and inhibitory rate of mice in each group were observed. And the inhibitory effect of the two drugs on tumor tissue was evaluated. The relationship between the order of combination therapy for the treatment and the inhibition rate was explored. In addition, the apoptosis of lung cancer cells and associated gene expression were analysed by TUNEL and flow cytometry.Results In the increase of tumor volume, the combined treatment group was significantly slower than the NS group, but also slower than use the drug artemether or cisplatin alone group. Compared with NS group, the tumor volume growth rate of artemether group or cisplatin group was slower. The tumor inhibition rates of artemether group and cisplatin group were 36.44% and 50.29%. The tumor inhibition rates of combined treatment (first give artemether group, first give cisplatin group, the same time give artemether and cisplatin group) were (62.15%, 65.54%, 66.67%) , compared with artemether alone group or cisplatin alone group (P < 0.05).There was no difference in the tumor inhibition between the combined treatmentthe groups (P > 0.05). Kim's formula was used to evaluate the synergy of combined treatment: the q values for the three modes of combined treatment were 0.85 < q < 1.15, that showed the additive inhibition of combined artemether and cisplatin in mice Lewis lung cancer. By flow cytometry, the result of TUNEL indicated that combined artemether and cisplatin can induce apoptosis and necrosis. Combined

  14. Modular gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gearing system using modular gear bearing components. Each component is composed of a core, one or more modules attached to the core and two or more fastening modules rigidly attaching the modules to the core. The modules, which are attached to the core, may consist of gears, rollers or gear bearing components. The core orientation affects the orientation of the modules attached to the core. This is achieved via the keying arrangement of the core and the component modules that attach to the core. Such an arrangement will also facilitate the phase tuning of gear modules with respect to the core and other gear modules attached to the core.

  15. Lung Diseases

    Science.gov (United States)

    When you breathe, your lungs take in oxygen from the air and deliver it to the bloodstream. The cells in your body need oxygen to ... you breathe nearly 25,000 times. People with lung disease have difficulty breathing. Millions of people in ...

  16. Lung Cancer

    Science.gov (United States)

    Lung cancer is one of the most common cancers in the world. It is a leading cause of cancer death in men and women in the United States. Cigarette smoking causes most lung cancers. The more cigarettes you smoke per day and ...

  17. Lung Cancer Screening

    Science.gov (United States)

    ... Treatment Lung Cancer Prevention Lung Cancer Screening Research Lung Cancer Screening (PDQ®)–Patient Version What is screening? Go ... These are called diagnostic tests . General Information About Lung Cancer Key Points Lung cancer is a disease in ...

  18. Lung Cancer Prevention

    Science.gov (United States)

    ... Treatment Lung Cancer Prevention Lung Cancer Screening Research Lung Cancer Prevention (PDQ®)–Patient Version What is prevention? Go ... to keep cancer from starting. General Information About Lung Cancer Key Points Lung cancer is a disease in ...

  19. Lung Nodules: Overview

    Science.gov (United States)

    ... Count You are here: Health Information > Condition Information Lung Nodule: Overview What is a lung nodule? A lung nodule is also called a ... better outcome. What are the symptoms of a lung nodule? Nearly 90% of all lung nodules are ...

  20. Collapsed lung (pneumothorax)

    Science.gov (United States)

    Air around the lung; Air outside the lung; Pneumothorax dropped lung; Spontaneous pneumothorax ... Collapsed lung can be caused by an injury to the lung. Injuries can include a gunshot or knife wound ...

  1. Lung tumors

    International Nuclear Information System (INIS)

    This volume 17 in the series of clinicoradiological seminars deals with malignant lung tumors. Twenty-four authors contributed to this comprehensive survey of current knowledge and methods, with about half of the contributions in the monography being concerned with aetiology and epidemiology of the lung, anatomy of the lung and anatomy of lung tumors, as well as with the current diagnostic methods. The latter are discussed in great detail and include CT, differential diagnosis of pulmonary nodules, angiography for lung tumor diagnostics, and nuclear medical diagnostics. The main issue of the other contributions is a new approach in oncology that works towards interdisciplinary exchange of information among experts in search for improved therapies. (orig./MG) With 44 tabs., 111 figs

  2. Development of Flexible Bearing

    Directory of Open Access Journals (Sweden)

    K.S.Mohanraj

    2014-06-01

    Full Text Available Elastomeric base isolation systems are proven to be effective in reducing seismic forces transmitted to buildings. However, due to their cost, the use of these devices is currently limited to large and expensive buildings. A fiber reinforced elastomeric isolator utilizes fiber fabric, such as carbon fiber, glass fibre, and etc. as the reinforcement material instead of solid steel plates. The fibre fabric reinforcement is extensible in tension and has no flexural rigidity. Elastomers normally used in the isolator are natural rubber; neoprene, butyl rubber and nit rile rubber etc. These devices were fabricated by binding alternating layers of rubber and fibre mesh. The fibre mesh is used to increase the vertical stiffness of the bearings while maintaining low lateral stiffness. Characterizing the behaviour of a fibre reinforced bearing “shape factor” of the bearing, Poisson’s ratio of the elastomeric material and flexibility of the reinforcing sheets and investigate the effect of reinforcement flexibility on compressive behaviour of elastomeric bearings with different geometrical and material properties. Bonding with fibre reinforcements can increase the stiffness of elastic layers only when the elastic layer is compressed.

  3. Flexure Bearing Reduces Startup Friction

    Science.gov (United States)

    Clingman, W. Dean

    1991-01-01

    Design concept for ball bearing incorporates small pieces of shim stock, wire spokes like those in bicycle wheels, or other flexing elements to reduce both stiction and friction slope. In flexure bearing, flexing elements placed between outer race of ball bearing and outer ring. Elements flex when ball bearings encounter small frictional-torque "bumps" or even larger ones when bearing balls encounter buildups of grease on inner or outer race. Flexure of elements reduce high friction slopes of "bumps", helping to keep torque between outer ring and inner race low and more nearly constant. Concept intended for bearings in gimbals on laser and/or antenna mirrors.

  4. The Anti-Lung Cancer Activities of Steroidal Saponins of P. polyphylla Smith var. chinensis (Franch. Hara through Enhanced Immunostimulation in Experimental Lewis Tumor-Bearing C57BL/6 Mice and Induction of Apoptosis in the A549 Cell Line

    Directory of Open Access Journals (Sweden)

    Rui-Ping Wang

    2013-10-01

    Full Text Available P. polyphylla Smith var. chinensis (Franch. Hara (PPSCFH has been used as medicinal Paris for the prevention and treatment of cancers in China for thousands of years. Its main components, steroidal saponins (PRS, have been confirmed to inhibit tumor growth. In the present study, the immunostimulation of PRS was investigated in Lewis bearing-C57BL/6 mice while the induction of apoptosis in A549 cells was also studied. The treatment with PRS (2.5, 5.0 and 7.5 mg/kg significantly inhibited tumor, volume, and weight in the C57BL/6 mice. The rates of inhibition of PRS (at 2.5, 5.0 and 7.5 mg/kg were 26.49 ± 17.30%, 40.32 ± 18.91% and 54.94 ± 16.48%, respectively. The spleen and thymus indexes were increased remarkably, while the levels of inflammatory cytokines including TNF-α, IL-8 and IL-10 in serum were decreased according to ELISA assays. For A549 cells, Hoechst 33342 staining and annexin V/PI by flow cytometry showed that PRS (0.25, 0.50 and 0.75 mg/mL induced nuclear changes of A549 cells with DNA condensation and fragmentations of chromatin, as well as inducing apoptosis. Furthermore, PRS could also attenuate the over-generation of intracellular ROS. Western blotting analysis showed a significant decrease on the expressions of proinflammatory cytokines MCP-1, IL-6 and TGF-β1, as well as cell adhesion molecule ICAM-1, by treatment with PRS. Our results demonstrated that the inhibition of PRS on tumor growth might be associated with the amelioration of inflammation responses, induction of apoptosis, as well as the decrease of ROS. These results suggested that PRS implied a potential therapeutic effect in the lung cancer treatment.

  5. Lung Diseases

    Science.gov (United States)

    ... to view this content or go to source URL . Health Studies & Clinical Trials LIFE and VALID Lung ... 27709 Last Reviewed: June 03, 2016 This page URL: NIEHS website: http://www.niehs.nih.gov/ Email ...

  6. Lung cancer

    International Nuclear Information System (INIS)

    There will be over 160,000 cases of lung cancer diagnosed in the US in 1991, and deaths from this disease account for a quarter of all cancer deaths in this country. The incidence of lung cancer has continued to increase, especially among women. With 31% of American men and 25% of American women identified in the 1985 census as cigarette smokers, it is likely that this trend will continue well into the next century. Unfortunately, the majority of patients present with locally advanced tumors or distant metastatic disease. Presently, most patients with lung cancer will receive radiation therapy either in an attempt to control inoperable or locally advanced disease, or for palliation of symptomatic intrathoracic or metastatic disease. Because of the poor prognosis of all patients excepting those with early stage resectable lesions, lung cancer is appropriately the subject of intense clinical investigation and controversy throughout the world

  7. Reliability for fluid bearings design

    OpenAIRE

    DIOP, Khadim; CHARKI, Abdérafi; CHAMPMARTIN, Stéphane; AMBARI, Abdelhak

    2013-01-01

    This paper presents a new methodology for evaluating the failure probability of fluid bearings which are sensitive components for the design of machine rotors, mechatronic systems and high precision metrology. The static and dynamic behavior of a fluid bearing depends on several parameters, such as external load, bearing dimensions, supply pressure, quality of the machined surfaces, fluid properties, etc. In this paper, the characteristics of a simple geometry thrust bearing are calculated an...

  8. Reliability of a hydrostatic bearing

    OpenAIRE

    CHARKI, Abderafi; DIOP, Khadim; CHAMPMARTIN, Stéphane; AMBARI, Abdelhak

    2013-01-01

    This paper presents a methodology for evaluating the failure probability of fluid bearings, which are sensitive components for the design of machine rotors, mechatronic systems, and high precision metrology. The static and dynamic behavior of a fluid bearing depends on several parameters, such as external load, bearing dimensions, supply pressure, quality of the machined surfaces, fluid properties, etc. In this paper, the characteristics of a simple geometry hydrostatic bearing are calculated...

  9. Households' Interest-bearing Assets

    OpenAIRE

    Ellis Connolly; Fiona Fleming; Jarkko Jääskelä

    2012-01-01

    Households invest around two-fifths of their financial assets in interest-bearing assets. These assets are predominantly held directly in deposits and also via superannuation and other investment funds. Deposits have grown strongly in recent years, although there has been no growth in interest-bearing securities. Compared with other advanced economies, interest-bearing assets represent a relatively small share of financial assets. For the household sector as a whole, interest-bearing assets a...

  10. 两种分割模式下甘露聚糖肽联合放疗对Lewis肺癌的生长抑制作用%Mannatide enhances the efficacy of fractionated and unfractionated radiotherapy in mice bearing Lewis lung cancer

    Institute of Scientific and Technical Information of China (English)

    樊锐太; 胡勇; 刘俊启; 张晶晶; 宋锐; 顾浩

    2011-01-01

    Objective To investigate the effect of mannatide injection (MI) in enhancing the efficacy of radiotherapy in two therapeutic schedules in mice bearing Lewis lung cancer. Methods C57BL/6 mice bearing Lewis lung cancer xenograft were assigned randomly into control group, fractionated schedule (FS) group, nonfractionated schedule (NFS) group, MI group, FS+MI group, and NFS+MI group (n=10). MI (4.5 mg/kg) or saline was given intraperitoneally for 14 consecutive days in the corresponding groups. Radiation with 8 MeV electron beam was delivered in a single 4 Gy dose in NFS and in 4 fractions (total dose 4 Gy) in FS. Tumor inhibition rate and the spleen and thymus index were calculated after the treatments. Results MI significantly enhanced the efficacy of radiotherapy with a tumor inhibition rate reaching 70% in FS+MI group (P<0.01). FS resulted in a significantly higher tumor inhibition rate than NFS (P< 0.05), but the rates were comparable between FS+MI and NFS+MI groups. The spleen index and thymus indices were significantly higher in FS+MI and NFS+MI groups than in FS and NFS groups (P<0.05). Conclusion MI can enhance the efficacy of radiotherapy with different therapeutic schedules in mice bear Lewis lung cancer, and MI plus fractionated radiation produces the optimal effect.%目的 探讨两种放疗分割模式下甘露聚糖肽注射液(MI)对Lewis肺癌小鼠移植瘤的生长抑制作用.方法 建立C57BL/6小鼠Lewis肺癌实体型,选取C57BL/6小鼠60只(右前肢腋部的肿瘤直径大小约6mm),随机分为空白对照组,分割照射组(FS),不分割照射组(NFS),MI组,分割照射联合MI组(FS+MI),不分割照射联合MI(NFS+MI)6组.给药组小鼠均腹腔注射MI4.5 mg/kg,连续14d,余各组均腹腔注射等体积生理盐水;照射组小鼠经8MeV电子线照射治疗,其中不分割方案各组小鼠接受4Gy/次,照射1次,分割方案各组小鼠给予1Gy/次,照射4次,1次/d.观察各组小鼠一般状况,剥离肿瘤,称取质量,计算

  11. Centrifugally decoupling touchdown bearings

    Science.gov (United States)

    Post, Richard F

    2014-06-24

    Centrifugally decoupling mechanical bearing systems provide thin tensioned metallic ribbons contained in a support structure. This assembly rotates around a stationary shaft being centered at low speeds by the action of the metal ribbons. Tension springs are connected on one end to the ribbons and on the other end to the support structure. The ribbons pass through slots in the inner ring of the support structure. The spring preloading thus insures contact (or near-contact) between the ribbons and the shaft at rotation speeds below the transition speed. Above this speed, however, the centrifugal force on the ribbons produces a tensile force on them that exceeds the spring tensile force so that the ribbons curve outward, effectively decoupling them from mechanical contact with the shaft. They still remain, however, in position to act as a touchdown bearing in case of abnormally high transverse accelerations.

  12. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  13. Rotating plug bearing and seal

    Science.gov (United States)

    Wade, Elman E.

    1977-01-01

    A bearing and seal structure for nuclear reactors utilizing rotating plugs above the nuclear reactor vessel. The structure permits lubrication of bearings and seals of the rotating plugs without risk of the lubricant draining into the reactor vessel below. The structure permits lubrication by utilizing a rotating outer race bearing.

  14. Rotating plug bearing and seal

    International Nuclear Information System (INIS)

    Disclosed is a bearing and seal structure for nuclear reactors utilizing rotating plugs above the nuclear reactor vessel. The structure permits lubrication of bearings and seals of the rotating plugs without risk of the lubricant draining into the reactor vessel below. The structure permits lubrication by utilizing a rotating outer race bearing. 19 claims, 3 figures

  15. ANSWER: A bear paw.

    OpenAIRE

    Ian BICKLE

    2012-01-01

    (Refer to page 186)Answer: Bear Paw sign of Xanthogranulomatous PyelonephritisThe contrast enhanced (portal venous phase)CT of the abdomen showed a global enlargement of the right kidney. There are multiplelow attenuation areas in the renal parenchyma, in a ‘hydronephrotic type manner’, but with no true hydronephrosis. This is due to a renal calculus lying in a contracted pelvis with dilated calyces that contain inflammatory debris. A rim of normal renal tissue enhancesperipherally. The appea...

  16. Anti-backlash gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gear bearing having a first gear and a second gear, each having a plurality of teeth. Each gear operates on two non-parallel surfaces of the opposing gear teeth to perform both gear and bearing functions simultaneously. The gears are moving at substantially the same speed at their contact points. The gears may be roller gear bearings or phase-shifted gear bearings, and may be arranged in a planet/sun system or used as a transmission. One preferred embodiment discloses and describes an anti-backlash feature to counter ''dead zones'' in the gear bearing movement.

  17. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. PMID:25775930

  18. Lung function

    International Nuclear Information System (INIS)

    The term lung function is often restricted to the assessment of volume time curves measured at the mouth. Spirometry includes the assessment of lung volumes which can be mobilised with the corresponding flow-volume curves. In addition, lung volumes that can not be mobilised, such as the residual volume, or only partially as FRC and TLC can be measured by body plethysmography combined with the determination of the airway resistance. Body plethysmography allows the correct positioning of forced breathing manoeuvres on the volume-axis, e.g. before and after pharmacotherapy. Adding the CO single breath transfer factor (TLCO), which includes the measurement of the ventilated lung volume using He, enables a clear diagnosis of different obstructive, restrictive or mixed ventilatory defects with and without trapped air. Tests of reversibility and provocation, as well as the assessment of inspiratory mouth pressures (PImax, P0.1) help to classify the underlying disorder and to clarify treatment strategies. For further information and to complete the diagnostic of disturbances of the ventilation, diffusion and/or perfusion (capillar-)arterial bloodgases at rest and under physical strain sometimes amended by ergospirometry are recommended. Ideally, lung function measurements are amended by radiological and nuclear medicine techniques. (orig.)

  19. Lung cancer - small cell

    Science.gov (United States)

    Cancer - lung - small cell; Small cell lung cancer; SCLC ... About 15% of all lung cancer cases are SCLC. Small cell lung cancer is slightly more common in men than women. Almost all cases of SCLC ...

  20. Protecting Your Lungs

    Science.gov (United States)

    ... Diseases > Protecting Your Lungs Tips to Keep Your Lungs Healthy Sometimes we take our lungs for granted. ... Avoid Exposure to Pollutants That Can Damage Your Lungs Secondhand smoke, outdoor air pollution , chemicals in the ...

  1. Lung cancer - small cell

    Science.gov (United States)

    Cancer - lung - small cell; Small cell lung cancer; SCLC ... About 15% of all lung cancer cases are SCLC. Small cell lung cancer is slightly more common in men than women. Almost all cases of SCLC are ...

  2. Bearings only naval tracking

    Energy Technology Data Exchange (ETDEWEB)

    Barth, M.J.

    1984-11-01

    Two commonly used Extended Kalman Filter tracking algorithms utilize the Relative Cartesian and Modified Polar coordinate systems. This report compares the two algorithms by exercising a destroyer-Submarine (DD/SS) computer simulation. A simple engagement geometry is employed which encompasses the major DD/SS options available. Error statistics are developed by Monte Carlo methods. Results are presented which show that the circular error depends upon the diagonal values of the error covariance matrix. The results also support (but do not establish) that the optimum DD manuevuer is that which minimizes the range while maximizing the bearing rate. 4 refs., 5 figs., 4 tabs.

  3. Self lubricating fluid bearings

    International Nuclear Information System (INIS)

    The invention concerns self lubricating fluid bearings, which are used in a shaft sealed system extending two regions. These regions contain fluids, which have to be isolated. A first seal is fluid tight for the first region between the carter shaft and the shaft. The second seal is fluid tight between the carter and the shaft, it communicates with the second region. The first fluid region is the environment surrounding the shaft carter. The second fluid region is a part of a nuclear reactor which contains the cooling fluid. The shaft is conceived to drive a reactor circulating and cooling fluid

  4. Lung radiopharmaceuticals

    International Nuclear Information System (INIS)

    Indication or main clinical use of Lung radiopharmaceuticals is presented and clasification of radiopharmaceuticals as ventilation and perfusion studies. Perfusion radiopharmaceuticals, main controls for administration quality acceptance. Clearence after blood administration and main clinical applications. Ventilation radiopharmaceuticals, gases and aerosols, characteristics of a ideal radioaerosol, techniques of good inhalation procedure, clinical applications. Comparison of several radiopharmaceuticals reflering to retention time as 50% administered dose, percent administered dose at 6 hours post inhalation, blood activity at 30 and 60 minutes post inhalation, initial lung absorbed dose, cumulated activity.Kinetic description of two radiopharmaceuticals, 99mTcDTPA and 99mTc-PYP

  5. Superconducting bearings in flywheels

    Energy Technology Data Exchange (ETDEWEB)

    Coombs, T.A.; Campbell, A.M.; Ganney, I.; Lo, W. [Cambridge Univ. (United Kingdom). Interdisciplinary Research Centre in Superconductivity (IRC); Twardowski, T. [International Energy Systems, Chester High Road, Neston, South Wirral (United Kingdom); Dawson, B. [British Nuclear Fuels, Capenhurst, South Wirral (United Kingdom)

    1998-05-01

    Investigations are being carried out into the use of superconducting magnetic bearings to levitate energy storage flywheels. In a planned program of work, Cambridge University are aiming to produce a practical bearing system for Pirouette(TM). The Pirouette(TM) system is designed to provide 5 kWh of recoverable energy which is currently recoverable at a rate of 5 kW (future revisions will provide up to 50 kW). IES (a British Nuclear Fuels subsidiary) the owners of the Pirouette(TM) machine have supplied Cambridge with a flywheel. This flywheel weighs >40 kg and is being levitated using an Evershed-type arrangement in which the superconductor is being used to stabilize the interaction between two magnets. To date we have demonstrated stable levitation in static and low speed tests in a rig designed for low speeds of rotation in air. A second rig which is currently under construction at BNFL will run in vacuum at speeds of up to 50 (orig.) 5 refs.

  6. Superconducting bearings in flywheels

    International Nuclear Information System (INIS)

    Investigations are being carried out into the use of superconducting magnetic bearings to levitate energy storage flywheels. In a planned program of work, Cambridge University are aiming to produce a practical bearing system for Pirouette(TM). The Pirouette(TM) system is designed to provide 5 kWh of recoverable energy which is currently recoverable at a rate of 5 kW (future revisions will provide up to 50 kW). IES (a British Nuclear Fuels subsidiary) the owners of the Pirouette(TM) machine have supplied Cambridge with a flywheel. This flywheel weighs >40 kg and is being levitated using an Evershed-type arrangement in which the superconductor is being used to stabilize the interaction between two magnets. To date we have demonstrated stable levitation in static and low speed tests in a rig designed for low speeds of rotation in air. A second rig which is currently under construction at BNFL will run in vacuum at speeds of up to 50 (orig.)

  7. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  8. Lung cancer

    International Nuclear Information System (INIS)

    This article is about the diagnosis, treatment and monitoring of lung cancer. Before the treatment the histological samples allowing the diagnosis as well as its histological variety. The diagnosis include techniques such as bronchoscopy, ultrasound, tomography, puncture and endoscopic thoracotomy. The chemotherapy and radiotherapy are the main techniques used for the treatment

  9. Lung cancer

    DEFF Research Database (Denmark)

    Hansen, H H; Rørth, M

    1999-01-01

    The results of the many clinical trials published in 1997 had only modest impact on the treatment results using either cytostatic agents alone or combined with radiotherapy in lung cancer. In SCLC, combination chemotherapy including platin-compounds (cisplatin, carboplatin) and the podophyllotoxins...

  10. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  11. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  12. Fish of Bear Lake, Utah

    OpenAIRE

    Palacios, Patsy; Luecke, Chris; Robinson, Justin

    2007-01-01

    There are 13 species of fish found in the waters of Bear Lake. Of those 13, 4 are endemic (found only in Bear Lake). The 4 endemics species are Bonneville cisco, Bonneville whitefish, Bear Lake whitefish, and Bear Lake sculpin. Five of the remaining 9 fish species are native to the region, and 4 are exotic introductions. These native fishes are the Bonneville cutthroat trout, Utah sucker, redside shiner, speckled dace and Utah chub. The exotic fishes are lake trout, common carp, yellow p...

  13. Dynamic Analysis of Engine Bearings

    Directory of Open Access Journals (Sweden)

    H. Hirani

    1999-01-01

    Full Text Available This paper presents a simple methodology to evaluate the stiffness and damping coefficients of an engine bearing over a load cycle. A rapid technique is used to determine the shaft ‘limit cycle’ under engine dynamic loads. The proposed theoretical model is based on short and long bearing approximations. The results obtained by present approximation are compared with those obtained by numerical method. The influence of thermal effects on the stiffness and damping coefficients is predicted by using a simplified thermal analysis. In order to illustrate the application of the proposed scheme, one engine main bearing and a connecting rod bearing are analysed.

  14. Autosizing Control Panel for Needle Bearing

    OpenAIRE

    Prof.A.R.Wadhekar,; Ms Jyoti R. Rajput

    2016-01-01

    A needle roller bearing is a bearing which uses small cylindrical rollers. Bearings are used to reduce friction of any rotating surface. Needle bearings have a large surface in contact with the bearing outer surfaces as compared to ball bearings. There is less added clearance(Diameter of the shaft and the diameter of the bearing are different) so they are much compact. The structure consists of a needle cage which contains the needle rollersthemselves and an outer race (The housin...

  15. Superconducting bearings for flywheel applications

    OpenAIRE

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings in flywheels.

  16. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  17. What about the Javan Bear?

    NARCIS (Netherlands)

    Jentink, F.A.

    1898-01-01

    The other day I read in a dutch popular periodical a paper dealing with the different species of Bears and their geographical distribution. To my great surprise the Malayan Bear was mentioned from Java: the locality Java being quite new to me I wrote to the author of that paper and asked him some in

  18. Lung nodule

    International Nuclear Information System (INIS)

    It understands for nodule, any lung lesion or pleural whose radiological representation corresponds more or less to an opacity rounded, discreet and very defined, of two up to 30 mm of more diameter, (ACCP/ATS Joint Committee on Pulmonary Nomenclature, 1976). Injure of more than 30 mm. They are considered masses. Nodule is considered an useful describer and it is advisable its use, preferably to that of its synonym that is considered a colloquial term, it should always be used accompanied by qualifying with regard to the size, localization, characteristic of the borders, number and opacity or density; to identification of a solitary lung nodule (SLN) it is one of the problems more currents in the radiological practice, the radiologist plays a decisive paper in the appropriate evaluation of the morphological characteristic of this type of lesions, and in the orientation of the behavior of the same ones

  19. Space Station alpha joint bearing

    Science.gov (United States)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  20. Fire safety of rubber bearings

    International Nuclear Information System (INIS)

    The objective of the study is to experimentally evaluate the fire resistance of the natural-rubber bearings to be incorporated into a Fast Reactor (FBR) under study. Four experiments were performed to look at the effect of bearing diameters and heating conditions on the performance. The full-scale specimen sustained the design-basis load for more than 3.5 hours under 'standard fire.' Medium-size bearings showed resistance for 2-4 hours, according to heating temperatures. The paper also summarizes the methods and the results of simulation analyses of rubber bearings subjected to load/temperature conditions under fire. The vertical deformation of the bearings can be calculated very well, using the temperature profiles obtained from testing. However, the heat transfer analyses did not give good results, especially in the cases/portions where heat was generated due to rubber combustion. (author)

  1. Hyperlucent lung

    International Nuclear Information System (INIS)

    Unilateral hyperlucent lung is also known as Swyer-James Syndrome, Macleod Syndrome or lobular or unilateral emphysema. It is an uncommon disease characterized by lung or unilateral lobe hiperlucency associated to an air trapping upon expiration. As regards to etiology, this syndrome is considered to be an acquired disease that appears secondary to respiratory infections during the early years of life, probably bronchiolitis and/ or viral pneumonia. The clinical presentation varies among patients. Some of them are asymptomatic, others present a history of recurrent episodes of pulmonary infections from early years of life or present effort dyspnea. The diagnosis is usually made accidentally by a chest radiograph in a child with history of respiratory infections or in an adult during a routine chest x- ray in an asymptomatic person. It is important to differentiate this syndrome from other causes of unilateral pulmonary hiperlucency on conventional chest x-rays. Few cases of Swyer-James Syndrome in children have been reported, it is presented the clinical case of a patient who had a parainfluenza 3 bronchopneumonia when he was a month and eighteen days of age. The differential diagnosis of this syndrome should be done with other thoracic entities that diminish the radiological pulmonary unilateral density. A case of a child who is the bearer of hyperlucent lung is described. (author)

  2. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears

    OpenAIRE

    Cahill, J.; Stirling, I.; Kistler, L.; Salamzade, R.; Ersmark, E.; Fulton, T.; Stiller, M.; Green, R.; Shapiro, B.

    2015-01-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear...

  3. EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

    Directory of Open Access Journals (Sweden)

    Emin GÜLLÜ

    2000-01-01

    Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

  4. How Lungs Work

    Science.gov (United States)

    ... Health and Diseases > How Lungs Work How Lungs Work The Respiratory System Your lungs are part of ... Parts of the Respiratory System and How They Work Airways SINUSES are hollow spaces in the bones ...

  5. Lung needle biopsy

    Science.gov (United States)

    ... if you have certain lung diseases such as emphysema. Usually, a collapsed lung after a biopsy does ... any type Bullae (enlarged alveoli that occur with emphysema) Cor pulmonale Cysts of the lung Pulmonary hypertension ...

  6. Lungs and Respiratory System

    Science.gov (United States)

    ... How Can I Help a Friend Who Cuts? Lungs and Respiratory System KidsHealth > For Teens > Lungs and ... you didn't breathe, you couldn't live. Lungs & Respiratory System Basics Each day we breathe about ...

  7. Lung diffusion testing

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003854.htm Lung diffusion testing To use the sharing features on this page, please enable JavaScript. Lung diffusion testing measures how well the lungs exchange ...

  8. Eosinophilic Lung Disorders

    Science.gov (United States)

    ... You are here: Health Information > Condition Information Eosinophilic Lung Disorders Eosinophilic lung disorders are a category of ... of Programs and Services Doctors Who Treat Eosinophilic Lung Disorders Rohit K. Katial Rafeul Alam Joshua J. ...

  9. Bears, Big and Little. Young Discovery Library Series.

    Science.gov (United States)

    Pfeffer, Pierre

    This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

  10. eBear: An Expressive Bear-Like Robot

    OpenAIRE

    Zhang, Xiao; Mollahosseini, Ali; B., Amir H. Kargar; Boucher, Evan; Voyles, Richard M.; Nielsen, Rodney; Mahoor, Mohammd H.

    2015-01-01

    This paper presents an anthropomorphic robotic bear for the exploration of human-robot interaction including verbal and non-verbal communications. This robot is implemented with a hybrid face composed of a mechanical faceplate with 10 DOFs and an LCD-display-equipped mouth. The facial emotions of the bear are designed based on the description of the Facial Action Coding System as well as some animal-like gestures described by Darwin. The mouth movements are realized by synthesizing emotions w...

  11. Lung infection

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    950304 The diagnosis and treatment of pulmonaryaspergilloma in the aged—a report of 17 cases.LI Di-anqin(李殿清),et al.Henan Provincial Pulmon DisHosp,Zhengzhou,450003.Chin J Geriatr 1994;13(6):338-339.Seventeen cases of pulmonary aspergilloma in theaged were reported.The primary diseases were pul-monary tuberculosis in 14 cases and pulmonary cyst,cancer of lung and pulmonary abscess in one each.In14 cases,the clinical manifestation was frequenthemoptysis;the occurrence rate was 82.4%.Among

  12. Interstitial lung disease

    Science.gov (United States)

    Diffuse parenchymal lung disease; Alveolitis; Idiopathic pulmonary pneumonitis (IPP) ... The lungs contain tiny air sacs (alveoli), which is where oxygen is absorbed. These air sacs expand with each ...

  13. Lung surgery - discharge

    Science.gov (United States)

    Thoracotomy - discharge; Lung tissue removal - discharge; Pneumonectomy - discharge; Lobectomy - discharge; Lung biopsy - discharge; Thoracoscopy - discharge; Video-assisted thoracoscopic surgery - discharge; VATS - ...

  14. Strategies for lung regeneration

    Directory of Open Access Journals (Sweden)

    Thomas H. Petersen

    2011-05-01

    Full Text Available Due to the limited ability of the adult lung to regenerate and the frequency of lung disease, the lung is a tissue that can especially benefit from regenerative medicine. Prospects for lung regeneration have made great strides in the past year. In this review, we summarize recent progress and key challenges for approaches in lung regenerative medicine. With a focus on the matrix components critical for the development of regenerative lung tissues, we discuss possible cell sources for lung regeneration, key matrix effects on cell repopulation, and physical stimuli that will aid in the growth of lung tissues in vitro.

  15. Mixed-mu superconducting bearings

    Science.gov (United States)

    Hull, John R.; Mulcahy, Thomas M.

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  16. High-resolution computed tomography in chronic infiltrative lung disease

    International Nuclear Information System (INIS)

    HRCT is an exceedingly powerful tool when brought to bear on selected patients with diffuse lung disease. In many ways HRCT effectively bridges the gap between the gestalt impression of a chest radiograph and the detailed, but very local, information provided by lung biopsy specimens. In the diagnostic flow chart which takes a patient with dyspnoea and non-specific radiographic shadowing through many tests, and possibly on to lung biospy, there is now enough evidence to elevate HRCT to a prime position in the hierarchy of investigations. (orig./VHE)

  17. Lung Circulation.

    Science.gov (United States)

    Suresh, Karthik; Shimoda, Larissa A

    2016-01-01

    The circulation of the lung is unique both in volume and function. For example, it is the only organ with two circulations: the pulmonary circulation, the main function of which is gas exchange, and the bronchial circulation, a systemic vascular supply that provides oxygenated blood to the walls of the conducting airways, pulmonary arteries and veins. The pulmonary circulation accommodates the entire cardiac output, maintaining high blood flow at low intravascular arterial pressure. As compared with the systemic circulation, pulmonary arteries have thinner walls with much less vascular smooth muscle and a relative lack of basal tone. Factors controlling pulmonary blood flow include vascular structure, gravity, mechanical effects of breathing, and the influence of neural and humoral factors. Pulmonary vascular tone is also altered by hypoxia, which causes pulmonary vasoconstriction. If the hypoxic stimulus persists for a prolonged period, contraction is accompanied by remodeling of the vasculature, resulting in pulmonary hypertension. In addition, genetic and environmental factors can also confer susceptibility to development of pulmonary hypertension. Under normal conditions, the endothelium forms a tight barrier, actively regulating interstitial fluid homeostasis. Infection and inflammation compromise normal barrier homeostasis, resulting in increased permeability and edema formation. This article focuses on reviewing the basics of the lung circulation (pulmonary and bronchial), normal development and transition at birth and vasoregulation. Mechanisms contributing to pathological conditions in the pulmonary circulation, in particular when barrier function is disrupted and during development of pulmonary hypertension, will also be discussed. © 2016 American Physiological Society. Compr Physiol 6:897-943, 2016. PMID:27065170

  18. Radiation Therapy for Lung Cancer

    Science.gov (United States)

    ... are available to help. HELPFUL WEB SITES ON LUNG CANCER American Lung Association www.lung.org Lungcancer.org www.lungcancer.org Lung Cancer Alliance www.lungcanceralliance.org Lung Cancer Online www. ...

  19. Needle Biopsy of the Lung

    Science.gov (United States)

    ... Physician Resources Professions Site Index A-Z Needle Biopsy of the Lung Needle biopsy of the lung ... Needle Biopsy of Lung Nodules? What is Needle Biopsy of the Lung? A lung nodule is relatively ...

  20. Nonlinear Control of Magnetic Bearings

    Institute of Scientific and Technical Information of China (English)

    Khac Duc Do; Dang Hoe Nguyen; Thanh Binh Nguyen

    2010-01-01

    In this paper, recent results controling nonlinear systems with output tracking error constraints are applied to the design of new tracking controllers for magnetic bearings. The proposed controllers can force the rotor to track a bounded and sufficiently smooth refer-ence trajectory asymptotically and guarantee non-contactedness be-tween the rotor and the stator of the magnetic bearings. Simulation results are included to illustrate the effectiveness of the proposed con-trollers.

  1. Failure analysis of superconducting bearings

    Energy Technology Data Exchange (ETDEWEB)

    Rastogi, Amit; Campbell, A M; Coombs, T A [Department of Engineering, University of Cambridge, Cambridge CB2 1PZ (United Kingdom)

    2006-06-01

    The dynamics of superconductor bearings in a cryogenic failure scenario have been analyzed. As the superconductor warms up, the rotor goes through multiple resonance frequencies, begins to slow down and finally touches down when the superconductor goes through its transition temperature. The bearing can be modelled as a system of springs with axial, radial and cross stiffness. These springs go through various resonant modes as the temperature of the superconductor begins to rise. We have presented possible explanations for such behavio0008.

  2. Failure analysis of superconducting bearings

    International Nuclear Information System (INIS)

    The dynamics of superconductor bearings in a cryogenic failure scenario have been analyzed. As the superconductor warms up, the rotor goes through multiple resonance frequencies, begins to slow down and finally touches down when the superconductor goes through its transition temperature. The bearing can be modelled as a system of springs with axial, radial and cross stiffness. These springs go through various resonant modes as the temperature of the superconductor begins to rise. We have presented possible explanations for such behaviour

  3. Designing Rolling-Element Bearings

    Science.gov (United States)

    Moore, James D., Jr.

    2007-01-01

    Bearing Analysis Tool (BAT) is a computer program for designing rolling-element bearings for cryogenic turbomachines. BAT provides a graphical user interface (GUI) that guides the entry of data to develop mathematical models of bearings. The GUI breaks model data into logical subsets that are entered through logic-driven input screens. The software generates a threedimensional graphical model of a bearing as the data are entered. Most dataentry errors become immediately obvious in the graphical model. BAT provides for storage of all the data on a shaft/bearing system, enabling the creation of a library of proven designs. Data from the library can be transferred to subsequent projects by use of simple cut-and-paste routines. BAT includes a library of temperature- dependent cryogenic bearing-material properties for use in the mathematical models. BAT implements algorithms that (1) enable the user to select combinations of design and/or operating-condition parameters, and then (2) automatically optimize the design by performing trade studies over all of the parameter combinations. This feature enables optimization over a large trade space in a fraction of the time taken when using prior bearingmodel software.

  4. Measuring the lung function in the mouse: the challenge of size

    Directory of Open Access Journals (Sweden)

    Bates Jason HT

    2003-05-01

    Full Text Available Abstract Measurement of the effects of drugs, mediators and infectious agents on various models of lung disease, as well as assessment of lung function in the intact mouse has the potential for significantly advancing our knowledge of lung disease. However, the small size of the mouse presents significant challenges for the assessment of lung function. Because of compromises made between precision and noninvasiveness, data obtained may have an uncertain bearing on the mechanical response of the lung. Nevertheless, considerable recent progress has been made in developing valid and useful measures of mouse lung function. These advances, resulting in our current ability to measure sophisticated indices of lung function in laboratory animals, are likely to lead to important insights into the mechanisms of lung disease.

  5. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Energy Regulatory Commission Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of Application for Partial Transfer of Licenses, and Soliciting Comments and Motions To Intervene On October 25, 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor)...

  6. Bear reintroduction: Lessons and challenges

    Science.gov (United States)

    Clark, Joseph D.; Huber, Djuro; Servheen, Christopher

    2002-01-01

    Reintroduction is defined as an attempt to establish a species in an area that was once part of its historical range, but from which it has been extirpated or become extinct. Historically, one of the most successful programs was the reintroduction of 254 American black bears (Ursus americanus) from Minnesota to the Interior Highlands of Arkansas in the 1960s; that population has grown to >2,500 today. More recent efforts have involved fewer but better monitored animals and have sometimes employed techniques to improve site fidelity and survival. In Pennsylvania, for example, pregnant female American black bears were successfully translocated from winter dens, the premise being that the adult females would be less likely to return because of the presence of young cubs. That winter-release technique was compared to summer trapping and release in Tennessee; winter releases resulted in greater survival and reduced post-release movements. Homing has not been a problem for small numbers of brown bears (Ursus arctos) reintroduced to the Cabinet-Yaak ecosystem in Montana and Idaho and to the mountains of Austria and France. Reintroduction success appears to be correlated with translocation distance and is greater for subadults and females. As with any small population, reintroduced bear populations are susceptible to environmental variation and stochastic demographic and genetic processes. Although managers have focused on these biological barriers, sociopolitical impediments to bear reintroduction are more difficult to overcome. Poor public acceptance and understanding of bears are the main reasons some reintroduction programs have been derailed. Consequently, the public should be involved in the reintroduction process from the outset; overcoming negative public perceptions about bear reintroduction will be our greatest challenge.

  7. 49 CFR 229.69 - Side bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Side bearings. 229.69 Section 229.69....69 Side bearings. (a) Friction side bearings with springs designed to carry weight may not have more than 25 percent of the springs in any one nest broken. (b) Friction side bearings may not be run...

  8. 36 CFR 13.1236 - Bear orientation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear Orientation. Failure to receive an NPS-approved Bear Orientation is prohibited....

  9. Superconductor bearings, flywheels and transportation

    Science.gov (United States)

    Werfel, F. N.; Floegel-Delor, U.; Rothfeld, R.; Riedel, T.; Goebel, B.; Wippich, D.; Schirrmeister, P.

    2012-01-01

    This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS-FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN2. More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

  10. Superconductor bearings, flywheels and transportation

    International Nuclear Information System (INIS)

    This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS–FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN2. More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

  11. Epidemiology of Lung Cancer

    OpenAIRE

    Bahader Yasser; Jazieh Abdul-Rahman

    2013-01-01

    Incidence and mortality attributed to lung cancer has risen steadily since the 1930s. Efforts to improve outcomes have not only led to a greater understanding of the etiology of lung cancer, but also the histologic and molecular characteristics of individual lung tumors. This article describes this evolution by discussing the extent of the current lung cancer epidemic including contemporary incidence and mortality trends, the risk factors for development of lung cancer, and details of promisi...

  12. Chemoradiotherapy for lung cancer

    International Nuclear Information System (INIS)

    Lung cancer remains a disease associated with a poor prognosis. Chemoradiotherapy is performed for unresectable stage 3 non-small cell lung cancer (NSCLC) and inoperable limited-disease small cell lung cancer. In this lecture, chemoradiotherapy for lung cancer is outlined primary according to the 2014 edition of the Clinical Practice Guidelines for Lung Cancer, and also referring to molecular targeted drugs, radiation pneumonitis, and particle radiotherapy. (author)

  13. Future Bearing Surfaces in Total Hip Arthroplasty

    OpenAIRE

    Chang, Jun-Dong

    2014-01-01

    One of the most important issues in the modern total hip arthroplasty (THA) is the bearing surface. Extensive research on bearing surfaces is being conducted to seek an ideal bearing surface for THA. The ideal bearing surface for THA should have superior wear characteristics and should be durable, bio-inert, cost-effective, and easy to implant. However, bearing surfaces that are currently being implemented do not completely fulfill these requirements, especially for young individuals for whom...

  14. 'Dodo' and 'Baby Bear' Trenches

    Science.gov (United States)

    2008-01-01

    NASA's Phoenix Mars Lander's Surface Stereo Imager took this image on Sol 11 (June 5, 2008), the eleventh day after landing. It shows the trenches dug by Phoenix's Robotic Arm. The trench on the left is informally called 'Dodo' and was dug as a test. The trench on the right is informally called 'Baby Bear.' The sample dug from Baby Bear will be delivered to the Phoenix's Thermal and Evolved-Gas Analyzer, or TEGA. The Baby Bear trench is 9 centimeters (3.1 inches) wide and 4 centimeters (1.6 inches) deep. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  15. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing .......e., as tilting-pad bearings, multirecess journal bearings and plain bearings.......This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing...... the rotational speed ranges by improving damping and eliminating instability problems, for example, by compensating cross-coupling destabilizing effects; reducing startup torque and energy dissipation in bearings; compensating thermal effects. It is shown that such controllable bearings can act as...

  16. Epidemiology of Lung Cancer.

    Science.gov (United States)

    Mao, Yousheng; Yang, Ding; He, Jie; Krasna, Mark J

    2016-07-01

    Lung cancer has been transformed from a rare disease into a global problem and public health issue. The etiologic factors of lung cancer become more complex along with industrialization, urbanization, and environmental pollution around the world. Currently, the control of lung cancer has attracted worldwide attention. Studies on the epidemiologic characteristics of lung cancer and its relative risk factors have played an important role in the tertiary prevention of lung cancer and in exploring new ways of diagnosis and treatment. This article reviews the current evolution of the epidemiology of lung cancer. PMID:27261907

  17. Lung transplantation: Postoperative imaging

    International Nuclear Information System (INIS)

    Lung transplantation has recently become feasible primarily due to improvements in surgical techniques and use of cyclosporin for immunosuppression. Because it allows the donor heart and, for single lung transplant, the second lung to be used in other recipients, this technique is gaining widespread use. Imaging procedures play an integral role in the diagnosis of posttransplant complications and in the assessment of the functional status of the transplanted lung. Unique complications seen in these patients include those associated with cyclosporin-induced immunosuppression, rejection, and bronchostrenosis and dehiscence of the bronchial anastomosis. The authors report the imaging findings in 13 single-lung and three double-lung transplant recipients

  18. EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

    Directory of Open Access Journals (Sweden)

    Jarosław KACZOR

    2014-06-01

    Full Text Available Durability deep groove ball bearings depends on factors (called attributes design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bearings to work three-bearing shafts, including elasticity and resilience three-bearing shafts.

  19. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  20. Mobile bearing and fixed bearing total knee arthroplasty

    Science.gov (United States)

    Dolfin, Marco; Saccia, Francesco

    2016-01-01

    The mobile bearing (MB) concept in total knee arthroplasty (TKA) was developed as an alternative to fixed bearing (FB) implants in order to reduce wear and improve range of motion (ROM), especially focused on younger patients. Unfortunately, its theoretical advantages are still controversial. In this paper we exhibit a review of the more recent literature available comparing FB and MB designs in biomechanical and clinical aspects, including observational studies, clinical trials, national and international registries analyses, randomized controlled trials, meta-analyses and Cochrane reviews. Except for some minor aspects, none of the studies published so far has reported a significant improvement related to MBs regarding patient satisfaction, clinical, functional and radiological outcome or medium and long-term survivorship. Thus the presumed superiority of MBs over FBs appears largely inconsistent. The routine use of MB is not currently supported by adequate evidences; implant choice should be therefore made on the basis of other factors, including cost and surgeon experience. PMID:27162777

  1. Lung and Bronchus Cancer

    Science.gov (United States)

    ... copy to myself The information used on this page will not be used to send unsolicited emails or shared with a third party. HPF: Did You Know? Video Series Lung Cancer - Did you know that lung cancer is the ...

  2. Lung Carcinoid Tumor: Surgery

    Science.gov (United States)

    ... Research Get Involved Find Local ACS Learn About Cancer » Lung Carcinoid Tumor » Detailed Guide » Surgery to treat lung carcinoid tumors Share this Page Close Push escape to close share window. Print ...

  3. Lungs and Respiratory System

    Science.gov (United States)

    ... to Know About Zika & Pregnancy Lungs and Respiratory System KidsHealth > For Parents > Lungs and Respiratory System Print ... have taken at least 600 million breaths. Respiratory System Basics All of this breathing couldn't happen ...

  4. Abscess in the Lungs

    Science.gov (United States)

    ... 2 Diabetes, Heart Disease a Dangerous Combo Are 'Workaholics' Prone to OCD, Anxiety? ALL NEWS > Resources First ... several weeks before a lung abscess clears up. Causes A lung abscess is usually caused by bacteria ...

  5. Staging of Lung Cancer

    Science.gov (United States)

    ... which therapy (or therapies) should be used. Second, lung cancer staging tells how much your cancer has spread. Knowing ... your body. How good are these tests at staging lung cancer? If your biopsy finds cancer cells, this is ...

  6. Lung PET scan

    Science.gov (United States)

    Chest PET scan; Lung positron emission tomography; PET - chest; PET - lung; PET - tumor imaging ... A PET scan requires a small amount of tracer. The tracer is given through a vein (IV), usually on ...

  7. Effects of bearing deadbands on bearing loads and rotor stability

    Science.gov (United States)

    1984-01-01

    A generic model of a turbopump, simplified to bring out these effects is examined. This model demonstrates that bearing deadbands which are of the same order of magnitude or larger than the center-of-mass offset of a rotor due to mass imbalances cause significantly different dynamic behavior than would be expected of a linear, dynamical system. This fundamentally nonlinear behavior yields altered stability characteristics and altered bearing loading tendencies. It is shown that side forces can enhance system stability in the small, i.e., as long as the mass imbalance does not exceed some thresholds value or as long as no large, impulsive disturbances cause the motion to depart significantly from the region of stability. Limit cycles are investigated in this report and techniques for determining these limit cycles are developed. These limit cycles are the major source of bearing loading and appear in both synchronous and nonsynchronous forms. The synchronous limit cycles are driven by rotor imbalances. The nonsynchronous limit cycles (also called subsynchronous whirls) are self-excited and are the sources of instability.

  8. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This paper reports techniques developed to live trap and handle brown bears on the Kodiak National Wildlife Refuge. The brown bears (Ursus middendorffi) on the...

  9. Brown bear telemetry and trapping: Special report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brown bear studies were continued during the 1967 field season with emphasis on development of techniques for instrumenting bears with radio transmitters and...

  10. Goose Eggs Could Save Polar Bears

    Institute of Scientific and Technical Information of China (English)

    孙淑敏

    2009-01-01

    Polar bears could avoid extinction despitemany starving to death in coming years, ac-cording to scientists and other observers whohave discovered that some of the bears havefound a new food source--goose and duckeggs.

  11. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    The aim of this work is to demonstrate how to utilize the bearings damping coefficients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 and described further in 1972. Several authors have refined this method over...... the years. In 1966 Jorgen W. Lund published an approach to find the dynamic coefficients of a journal bearing by a first order perturbation of the Reynold's equation. These coefficients made it possible to perform a rotor-bearing stability analysis for a statically loaded bearing. In the mid seventies...... Jorgen W. Lund pointed out in lecture notes that the dynamic damping coefficients of the bearing could be used to find the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for finding the damping coefficients in this work, but the...

  12. Lung Stem cell biology

    OpenAIRE

    Ardhanareeswaran, Karthikeyan; Mirotsou, Maria

    2013-01-01

    Over the past few years new insights have been added to the study of stem cells in the adult lung. The exploration of the endogenous lung progenitors as well as the study of exogenously delivered stem cell populations holds promise for advancing our understanding of the biology of lung repair mechanisms. Moreover, it opens new possibilities for the use of stem cell therapy for the development of regenerative medicine approaches for the treatment of lung disease. Here, we discuss the main type...

  13. Inhalational Lung Disease

    OpenAIRE

    S Kowsarian; Farzaneh; F Jamshidiha

    2010-01-01

    Inhalational lung diseases are among the most important occupational diseases. Pneumoconiosis refers to a group of lung diseases result from inhalation of usually inorganic dusts such as silicon dioxide, asbestos, coal, etc., and their deposition in the lungs. The resultant pulmonary disorders depend on the susceptibility of lungs; size, concentration, solubility and fibrogenic properties of the inhaled particles; and duration of exposure. Radiographic manifestations of pneumoconiosis become ...

  14. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B., III; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  15. Oil film pressure in hydrodynamic journal bearings

    OpenAIRE

    Valkonen, Antti

    2009-01-01

    Hydrodynamic journal bearings are critical power transmission components that are carrying increasingly high loads because of the increasing power density in various machines. Therefore, knowing the true operating conditions of hydrodynamic journal bearings is essential to machine design. Oil film pressure is one of the key operating parameters describing the operating conditions in hydrodynamic journal bearings. Measuring the oil film pressure in bearings has been a demanding task and theref...

  16. Mercury in polar bears from Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Lentfer, J.W.; Galster, W.A.

    1987-04-01

    Alaskan polar bear (Ursus maritimus) muscle and liver samples collected in 1972 were analyzed for total mercury. Bears north of Alaska had more mercury than bears west of Alaska. The only difference between young and adult animals was in the northern area where adults had more mercury in liver tissue than young animals. Levels were probably not high enough to be a serious threat to bears.

  17. Technology development for indigenous water lubricated bearings

    International Nuclear Information System (INIS)

    Water Lubricated Bearings (WLB) are used in various mechanisms of fuel handling systems of PHWRs and AHWR. Availability and random failures of these bearings was a major factor in refuelling operations. Indigenous development of these bearings was taken up and 7 types of antifriction bearings in various sizes (totaling 37 variants) for PHWR, AHWR and Dhruva applications were successfully developed. This paper deals with various aspects of WLB development. (author)

  18. Interstitial Lung Diseases

    Science.gov (United States)

    ... called pulmonary fibrosis. Breathing in dust or other particles in the air is responsible for some types of interstitial lung diseases. Specific types include Black lung disease among coal miners, from inhaling coal dust Farmer's lung, from inhaling farm dust Asbestosis, from inhaling ...

  19. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  20. 49 CFR 229.64 - Plain bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Plain bearings. 229.64 Section 229.64 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION....64 Plain bearings. A plain bearing box shall contain visible free oil and may not be cracked to...

  1. Passive Thermal Management of Foil Bearings

    Science.gov (United States)

    Bruckner, Robert J. (Inventor)

    2015-01-01

    Systems and methods for passive thermal management of foil bearing systems are disclosed herein. The flow of the hydrodynamic film across the surface of bearing compliant foils may be disrupted to provide passive cooling and to improve the performance and reliability of the foil bearing system.

  2. Hazards within the Bear Lake basin, Utah

    OpenAIRE

    Palacios, Patsy; Luecke, Chris; Robinson, Justin

    2007-01-01

    The Bear Lake basin developed from fault subsidence that continues today, slowly deepening the lake along the eastern side. The Bear Lake graben is about 5 miles long and 4.3-8.6 miles wide. It extends across the Utah-Idaho border and involves faults on both eastern and western sides of Bear Lake....

  3. Virginia Tech Bear Researchers Ensure Populations

    OpenAIRE

    Davis, Lynn

    2003-01-01

    The Cooperative Alleghany Bear Study (CABS) was initiated in 1994 as a 10-year study to ensure survival of Virginia's hunted black bear population of western Virginia. During the first six years of the study, researchers have placed radio collars on 376 of the 746 bears captured.

  4. The vented pressure fed gas journal bearing

    International Nuclear Information System (INIS)

    Hydrodynamic-type gas journal bearings with stabilising venting slots are often operated hydrostatically during starting-up as a means of 'jacking'. A simplified mathematical treatment of the circumferential gas flows in a vented, pressure-fed journal bearing is used to predict the relationship between load capacity, bearing geometry and gas properties. (author)

  5. Cool Polar Bears: Dabbing on the Texture

    Science.gov (United States)

    O'Connell, Jean

    2011-01-01

    In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

  6. Fractal analysis of polar bear hairs

    Directory of Open Access Journals (Sweden)

    Wang Qing-Li

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

  7. Microstructural degradation of bearing steels

    OpenAIRE

    Solano Alvarez, Wilberth

    2015-01-01

    The aim of the work presented in this thesis is to clarify one of the most fundamental aspects of fatigue damage in bearings steels through critical experiments, in particular whether damage in the form of cracks precedes hard ?white-etching matter" formation, which is carbon supersaturated nanoscaled ferrite. Heat treatments have been designed to create four different crack types and distributions: scarce martensite plate cracks, fine grain boundary cracks, abundant martensite plate cracks, ...

  8. Elid superfinishing of spherical bearings

    OpenAIRE

    Raffles, Mark H.

    2007-01-01

    Driven by a requirement to extend the lifespan of self-aligning lined spherical bearings, this research investigates the use of Elid (electrolytic in-process dressing) as a method of improving ball surface finish. Elid is a continuous and self-regulating electrochemical dressing process that modifies the surface of a grinding, lapping, or superfinishing wheel. It provides improved grit protrusion, impedes wheel loading / glazing and promotes effective cutting. The characteri...

  9. Risk-bearing and Entrepreneurship

    OpenAIRE

    Newman, Andrew

    2007-01-01

    In the 'Knightian' theory of entrepreneurship, entrepreneurs provide insurance to workers by paying fixed wages and bear all the risk of production. This paper endogenizes entrepreneurial risk by allowing for optimal insurance contracts as well as the occupational self-selection. Moral hazard prevents full insurance; increases in an agent’s wealth then entail increases in risk borne. Thus, even under decreasing risk aversion, there are robust instances in which workers are wealthier than entr...

  10. EFFECT OF PRELOAD OF ANGULAR CONTACT BALL BEARINGS ON LIFE OF BEARINGS

    OpenAIRE

    Andrzej RACZYŃSKI; Jarosław KACZOR

    2014-01-01

    Angular contact ball bearings are commonly used in such situations when you need to reach high bearing stiffness. However, a significant stiffness increase can be achieved only through the introduction of preload to the angular contact bearings. The purpose of this paper is to present a method for assessing the effect of preload of the angular contact bearings for their durability.

  11. EFFECT OF PRELOAD OF ANGULAR CONTACT BALL BEARINGS ON LIFE OF BEARINGS

    Directory of Open Access Journals (Sweden)

    Andrzej RACZYŃSKI

    2014-06-01

    Full Text Available Angular contact ball bearings are commonly used in such situations when you need to reach high bearing stiffness. However, a significant stiffness increase can be achieved only through the introduction of preload to the angular contact bearings. The purpose of this paper is to present a method for assessing the effect of preload of the angular contact bearings for their durability.

  12. The lung in space

    Science.gov (United States)

    Prisk, G. Kim

    2005-01-01

    The lung is exquisitely sensitive to gravity, which induces gradients in ventilation, blood flow, and gas exchange. Studies of lungs in microgravity provide a means of elucidating the effects of gravity. They suggest a mechanism by which gravity serves to match ventilation to perfusion, making for a more efficient lung than anticipated. Despite predictions, lungs do not become edematous, and there is no disruption to, gas exchange in microgravity. Sleep disturbances in microgravity are not a result of respiratory-related events; obstructive sleep apnea is caused principally by the gravitational effects on the upper airways. In microgravity, lungs may be at greater risk to the effects of inhaled aerosols.

  13. Cannibalism and predation on black bears by grizzly bears in the Yellowstone ecosystem, 1975-1990

    Science.gov (United States)

    Mattson, D.J.; Knight, R.R.; Blanchard, B.M.

    1992-01-01

    We documented one instance of an adult male grizzly bear preying upon a black bear and four instances where circumstantial evidence suggested that grizzly bears (two cubs-of-the-year, one yearling female that was injured, and one adult male) had been preyed upon by conspecifics. We also examined feces of grizzly bears for bear remains. Remains of bears tended to be more common in spring feces and did not differ in frequency between early and late years of the study. Our observations generally support existing hypotheses concerning cannibalism among bears.

  14. Ball Bearing Stacking Automation System

    Directory of Open Access Journals (Sweden)

    Shafeequerrahman S . Ahmed

    2013-01-01

    Full Text Available This document is an effort to introduce the concept of automation in small scale industries and or small workshops that are involved in the manufacturing of small objects such as nuts, bolts and ball bearing in this case. This an electromechanical system which includes certain mechanical parts that involves one base stand on which one vertical metallic frame is mounted and hinged to this vertical stand is an in humanized effort seems inadequate in this era making necessary the use of Electronics, Computer in the manufacturing processes leading to the concept of Automated Manufacturing System (AMS.The ball bearing stack automation is an effort in this regard. In our project we go for stack automation for any object for example a ball bearing, be that is still a manual system there. It will be microcontroller based project control system equipped with microcontroller 89C51 from any manufacturer like Atmel or Philips. This could have been easily implemented if a PLC could be used for manufacturing the staking unit but I adopted the microcontroller based system so that some more modification in the system can be effected at will as to use the same hardware .Although a very small object i.e. ball bearig or small nut and fixture will be tried to be stacked, the system with more precision and more power handling capacity could be built for various requirements of the industry. For increasing more control capacity, we can use another module of this series. When the bearing is ready, it will be sent for packing. This is sensed by an inductive sensor. The output will be proceeds by PLC and microcontroller card which will be driving the assembly in order to put it into pads or flaps. This project will also count the total number of bearings to be packed and will display it on a LCD for real time reference and a provision is made using a higher level language using hyper terminal of the computer

  15. Unilateral hypoperfusion lung

    International Nuclear Information System (INIS)

    The term unilateral hypoperfusion lung (UHL) is here used to indicate decreased unilateral activity of the lung as determined in the lung perfusion scintigram. The same condition has been referred to by other authors as absent perfusion of one lung, unilateral absence of pulmonary artery perfusion, total lack of pulmonary artery perfusion of one lung, bloodless lung, decreased unilateral perfusion of the lung, unilateral pulmonary hypoperfusion, nonperfusion of one lung and absence of radioactivity over one lung. We studied 59 cases of UHL, including pulmonary carcinoma, bronchial foreign body, hypo- or a-plasia of the lung or pulmonary artery, unilateral pleural effusion, post-operative and Swyer-James syndrome. Using scintigram, UHL was found even where slight or no abnormalities showed up on plain x-ray film, and the finding of UHL was especially useful to evaluate blood flow in the lucent or hyperlucent lung. Scintigraphic and pulmonary arteriogram findings corresponded. Bronchography or ventilation scintigraphy with 133Xe gas was also performed in some cases, and this additional ventilation study was effective in advanced diagnosis of chest diseases. On the other hand, ''Gamut'' which indicates a complete list of causes of a particular x-ray finding is available in the differential diagnosis or resident training. In a field of nuclear medicine, a gamut approach had also begun to be applied recently, so UHL was evaluated at this point of view. (author)

  16. Ball Bearing Analysis with the ORBIS Tool

    Science.gov (United States)

    Halpin, Jacob D.

    2016-01-01

    Ball bearing design is critical to the success of aerospace mechanisms. Key bearing performance parameters, such as load capability, stiffness, torque, and life all depend on accurate determination of the internal load distribution. Hence, a good analytical bearing tool that provides both comprehensive capabilities and reliable results becomes a significant asset to the engineer. This paper introduces the ORBIS bearing tool. A discussion of key modeling assumptions and a technical overview is provided. Numerous validation studies and case studies using the ORBIS tool are presented. All results suggest the ORBIS code closely correlates to predictions on bearing internal load distributions, stiffness, deflection and stresses.

  17. Valve assembly having remotely replaceable bearings

    Science.gov (United States)

    Johnson, Evan R.; Tanner, David E.

    1980-01-01

    A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings.

  18. Heuristic explanation of journal bearing instability

    Science.gov (United States)

    Crandall, S. H.

    1982-01-01

    A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small whirling motion of the journal generates a wave of thickness variation progressing around the channel. The hypothesis that the fluid flow drives the whirl whenever the mean of the pumped fluid velocity is greater than the peripheral speed of the thickness variation wave is discussed and compared with other simple explanations of journal bearing instability. It is shown that for non-cavitation long bearings the hypothesis predicts instability onset correctly for unloaded bearings but gradually overpredicts the onset speed as the load is increased.

  19. 67Ga lung scan

    International Nuclear Information System (INIS)

    Twenty-three patients with clinical signs of pulmonary embolic disease and lung infiltrates were studied to determine the value of gallium citrate 67Ga lung scan in differentiating embolic from inflammatory lung disease. In 11 patients without angiographically proved embolism, only seven had corresponding ventilation-perfusion defects compatible with inflammatory disease. In seven of these 11 patients, the 67Ga concentration indicated inflammatory disease. In the 12 patients with angiographically proved embolic disease, six had corresponding ventilation-perfusion defects compatible with inflammatory disease. None had an accumulation of 67Ga in the area of pulmonary infiltrate. Thus, ventilation-perfusion lung scans are of limited value when lung infiltrates are present. In contrast, the accumulation of 67Ga in the lung indicates an inflammatory process. Gallium imaging can help select those patients with lung infiltrates who need angiography

  20. Coupled Dynamics of a Rotor-Journal Bearing System Equipped with Thrust Bearings

    OpenAIRE

    Yu Lie; R.B. Bhat

    1995-01-01

    The rotordynamic coefficients of fixed-pad thrust bearing are introduced and calculated by using the out-domain method, and a general analysis method is developed to investigate the coupled dynamics of a rotor equipped with journal and thrust bearings simultaneously. Considerations include the effects of static tilt parameters of the rotor on rotordynamic coefficients of thrust bearing and the action of thrust bearing on system dynamics. It is shown that thrust bearing changes the load distri...

  1. Components of bull and bear markets: bull corrections and bear rallies

    OpenAIRE

    Maheu, John M; Thomas H. McCurdy; Yong Song

    2010-01-01

    Existing methods of partitioning the market index into bull and bear regimes do not identify market corrections or bear market rallies. In contrast, our probabilistic model of the return distribution allows for rich and heterogeneous intra-regime dynamics. We focus on the characteristics and dynamics of bear market rallies and bull market corrections, including, for example, the probability of transition from a bear market rally into a bull market versus back to the primary bear state. A Baye...

  2. Chromatographic (TLC) differentiation of grizzly bear and black bear scats

    Science.gov (United States)

    Picton, Harold D.; Kendall, Katherine C.

    1994-01-01

    While past work concluded that thin-layer chromatography (TLC) was inadequate for the separation of grizzly (Ursus arctos horribilis) and black bear (U. americanus) scats, our study found differences adequate for species separation. A key was constructed using 19 of 40 data points recorded on each(N)=356 profiles of 178) know-species scat. Accuracy was best for late summer scats (94%). Methods for specimen preparation, analysis, and reading the TLC profiles are discussed. Factors involved in scat variation were tested.

  3. A prototype construction of bearing heater system

    International Nuclear Information System (INIS)

    A bearing heater system has been successfully constructed using transformer-like method of 1000 VA power, 220 V primary voltage, and 50 Hz electrical frequency. The bearing heater consists of primary coil 230 turns, U type and bar-type iron core with 36 cm2, 9 cm2 ,and 3 cm2 cross-section, and electrical isolation. The bearing heater is used to enlarge the diameter of the bearing so that it can be easily fixed on an electric motor shaft during replacement because the heating is conducted by treated the bearing as a secondary coil of a transformer. This bearing heater can be used for bearing with 3 and 6 cm of inner diameter and 12 cm of maximum outside diameter. (author)

  4. Wave Journal Bearings Under Dynamic Loads

    Science.gov (United States)

    Hendricks, Robert C.; Dimofte, Florin

    2002-01-01

    The dynamic behavior of the wave journal bearing was determined by running a three-wave bearing with an eccentrically mounted shaft. A transient analysis was developed and used to predict numerical data for the experimental cases. The three-wave journal bearing ran stably under dynamic loads with orbits well inside the bearing clearance. The orbits were almost circular and nearly free of the influence of, but dynamically dependent on, bearing wave shape. Experimental observations for both the absolute bearing-housing-center orbits and the relative bearing-housing-center-to-shaft-center orbits agreed well with the predictions. Moreover, the subsynchronous whirl motion generated by the fluid film was found experimentally and predicted theoretically for certain speeds.

  5. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

    Science.gov (United States)

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-03-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. PMID:25490862

  6. Development and Evaluation of Titanium Spacesuit Bearings

    Science.gov (United States)

    Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an

  7. Hydrostatic bearings for a turbine fluid flow metering device

    Science.gov (United States)

    Fincke, J.R.

    1980-05-02

    A rotor assembly fluid metering device has been improved by development of a hydrostatic bearing fluid system which provides bearing fluid at a common pressure to rotor assembly bearing surfaces. The bearing fluid distribution system produces a uniform film of fluid distribution system produces a uniform film of fluid between bearing surfaces and allows rapid replacement of bearing fluid between bearing surfaces, thereby minimizing bearing wear and corrosion.

  8. Metachronous lung cancer that presented as bilateral synchronous lung cancer

    OpenAIRE

    Kocaturk, Celalettin Ibrahim; Cansever, Levent; Kanmaz, Dilek Zehra; Bedirhan, Mehmet Ali

    2013-01-01

    Every patient undergoing curative treatment for primary lung cancer is a candidate for metachronous lung cancer, with a reported risk of 5% per year. The majority of cases are stage I patients. Patients who undergo resection for lung cancer should be followed regularly. A metachronous lung cancer that develops as bilateral synchronous lung cancer is very rare.

  9. Conditioning of alpha bearing wastes

    International Nuclear Information System (INIS)

    Alpha bearing wastes are generated during the reprocessing of spent fuel, mixed oxide fuel fabrication, decommissioning and other activities. The safe and effective management of these wastes is of particular importance owing to the radiotoxicity and long lived characteristics of certain transuranic (TRU) elements. The management of alpha bearing wastes involves a number of stages which include collection, characterization, segregation, treatment, conditioning, transport, storage and disposal. This report describes the currently available matrices and technologies for the conditioning of alpha wastes and relates them to their compatibility with the other stages of the waste management process. The selection of a specific immobilization process is dependent on the waste treatment state and the subsequent handling, transport, storage and disposal requirements. The overall objectives of immobilization are similar for all waste producers and processors, which are to produce: (a) Waste forms with sufficient mechanical, physical and chemical stability to satisfy all stages of handling, transport and storage (referred to as the short term requirements), and (b) Waste forms which will satisfy disposal requirements and inhibit the release of radionuclides to the biosphere (referred to as the long term requirements). Cement and bitumen processes have already been successfully applied to alpha waste conditioning on the industrial scale in many of the IAEA Member States. Cement systems based on BFS and pozzolanic cements have emerged as the principal encapsulation matrices for the full range of alpha bearing wastes. Alternative technologies, such as polymers and ceramics, are being developed for specific waste streams but are unlikely to meet widespread application owing to cost and process complexity. The merits of alpha waste conditioning are improved performance in transport, storage and disposal combined with enhanced public perception of waste management operations. These

  10. Methyl sulfone PCB and DDE metabolites in the polar bear (Ursus maritimus) food chain

    Energy Technology Data Exchange (ETDEWEB)

    Letcher, R.J. [Carleton Univ., Ottawa, Ontario (Canada); Norstrom, R.J. [Environment Canada, Hull, Quebec (Canada); Muir, D.C.G. [Dept. of Fisheries and Oceans, Winnipeg, Manitoba (Canada)

    1995-12-31

    An important Arctic marine food chain is polar bear, ringed seal (Phoca hispida) and Arctic cod (Boreogadus saida). The Arctic is relatively uncontaminated by chlorinated hydrocarbon contaminants (CHCs). However, high levels of CHCs are bioaccumulated through the marine food web. Methyl sulfone (MeSO{sub 2})-PCB and -DDE metabolites are major CHCs in polar bear, although the proportion of MeSO{sub 2}-PCBs derived from PCB metabolism and/or MeSO{sub 2}-PCB bioaccumulation from the diet is unknown. For this reason, the structure and concentration of MeSO{sup 2}-PCB and -DDE metabolites, PCBs and DDE were determined in whole body Arctic cod, the liver, adipose, lung and muscle of ringed seal and ten tissues of polar bear from the Resolute Bay area of the Canadian Arctic. Preliminary analysis of the ratios of MeSO{sub 2}-PCBs in bear fat and liver to their parent PCBs in seal blubber suggested that CB-49 and CB-87 result in a higher proportion of metabolites in bear than the other PCB congeners, assuming that the MeSO{sup 2}-PCBs are not themselves accumulated from the diet. Bio-availability of the precursor PCBs for subsequent metabolism may also be a factor. The absence in bears of MeSO{sub 2}-metabolites of other metabolizable PCBs in seal may indicate that some MeSO{sub 2}-PCBs are not formed or that they are formed and further metabolized. The MeSO{sub 2}-PCB and -DDE levels and congener patterns among seal and bear tissues and the difference in tissue distribution between species will also be compared. In polar bear, the s-MeSO{sub 2}-PCB to S-PCB and s-MeSO{sub 2}-DDE to DDE ratios were highest in liver, indicating preferred storage.

  11. Comparison of Alignment Correction Angles Between Fixed-Bearing and Mobile-Bearing UKA.

    Science.gov (United States)

    Inoue, Atsuo; Arai, Yuji; Nakagawa, Shuji; Inoue, Hiroaki; Yamazoe, Shoichi; Kubo, Toshikazu

    2016-01-01

    Good outcomes have been reported with both fixed-bearing and mobile-bearing unicompartmental knee arthroplasty (UKA). However, overcorrected alignment could induce the progression of arthritis on the non-arthroplasty side. Changes of limb alignment after UKA with both types of bearings (fixed bearing: 24 knees, mobile bearing: 28 knees) were investigated. The mean difference between the preoperative standing femoral-tibial angle (FTA) and postoperative standing FTA was significantly larger in mobile bearing UKA group. In fixed-bearing UKA, there must be some laxity in MCL tension so that a 2-mm tension gauge can be inserted. In mobile-bearing UKA, appropriate MCL tension is needed to prevent bearing dislocation. This difference in MCL tension may have caused the difference in the correction angle between the groups. PMID:26264178

  12. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial stress-shear strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of fast breeder reactor (FBR) plants. The paper also discusses the protection method against aging and the quality control which are important for implementation

  13. Interference Fit Life Factors for Roller Bearings

    Science.gov (United States)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2008-01-01

    The effect of hoop stresses in reducing cylindrical roller bearing fatigue life was determined for various classes of inner ring interference fit. Calculations were performed for up to seven interference fit classes for each of ten bearing sizes. Each fit was taken at tightest, average and loosest values within the fit class for RBEC-5 tolerance, thus requiring 486 separate analyses. The hoop stresses were superimposed on the Hertzian principal stresses created by the applied radial load to calculate roller bearing fatigue life. The method was developed through a series of equations to calculate the life reduction for cylindrical roller bearings based on interference fit. All calculated lives are for zero initial bearing internal clearance. Any reduction in bearing clearance due to interference fit was compensated by increasing the initial (unmounted) clearance. Results are presented as tables and charts of life factors for bearings with light, moderate and heavy loads and interference fits ranging from extremely light to extremely heavy and for bearing accuracy class RBEC 5 (ISO class 5). Interference fits on the inner bearing ring of a cylindrical roller bearing can significantly reduce bearing fatigue life. In general, life factors are smaller (lower life) for bearings running under light load where the unfactored life is highest. The various bearing series within a particular bore size had almost identical interference fit life factors for a particular fit. The tightest fit at the high end of the RBEC-5 tolerance band defined in ANSI/ABMA shaft fit tables produces a life factor of approximately 0.40 for an inner-race maximum Hertz stress of 1200 MPa (175 ksi) and a life factor of 0.60 for an inner-race maximum Hertz stress of 2200 MPa (320 ksi). Interference fits also impact the maximum Hertz stress-life relation.

  14. Diet and lung cancer

    DEFF Research Database (Denmark)

    Fabricius, P; Lange, Peter

    2003-01-01

    Lung cancer is the leading cause of cancer-related deaths worldwide. While cigarette smoking is of key importance, factors such as diet also play a role in the development of lung cancer. MedLine and Embase were searched with diet and lung cancer as the key words. Recently published reviews and...... large well designed original articles were preferred to form the basis for the present article. A diet rich in fruit and vegetables reduces the incidence of lung cancer by approximately 25%. The reduction is of the same magnitude in current smokers, ex-smokers and never smokers. Supplementation with...... vitamins A, C and E and beta-carotene offers no protection against the development of lung cancer. On the contrary, beta-carotene supplementation has, in two major randomised intervention trials, resulted in an increased mortality. Smoking remains the leading cause of lung cancer. The adverse effects are...

  15. Diet and lung cancer

    DEFF Research Database (Denmark)

    Fabricius, P; Lange, Peter

    2003-01-01

    Lung cancer is the leading cause of cancer-related deaths worldwide. While cigarette smoking is of key importance, factors such as diet also play a role in the development of lung cancer. MedLine and Embase were searched with diet and lung cancer as the key words. Recently published reviews...... and large well designed original articles were preferred to form the basis for the present article. A diet rich in fruit and vegetables reduces the incidence of lung cancer by approximately 25%. The reduction is of the same magnitude in current smokers, ex-smokers and never smokers. Supplementation...... with vitamins A, C and E and beta-carotene offers no protection against the development of lung cancer. On the contrary, beta-carotene supplementation has, in two major randomised intervention trials, resulted in an increased mortality. Smoking remains the leading cause of lung cancer. The adverse effects...

  16. Coupled Dynamics of a Rotor-Journal Bearing System Equipped with Thrust Bearings

    Directory of Open Access Journals (Sweden)

    Yu Lie

    1995-01-01

    Full Text Available The rotordynamic coefficients of fixed-pad thrust bearing are introduced and calculated by using the out-domain method, and a general analysis method is developed to investigate the coupled dynamics of a rotor equipped with journal and thrust bearings simultaneously. Considerations include the effects of static tilt parameters of the rotor on rotordynamic coefficients of thrust bearing and the action of thrust bearing on system dynamics. It is shown that thrust bearing changes the load distribution of journal bearings and the static deflection of the rotor and delays the instability of the system considerably in lateral shaft vibration.

  17. AUTOPHAGY IN LUNG CANCER

    OpenAIRE

    Jaboin, Jerry J.; Hwang, Misun; Lu, Bo

    2009-01-01

    Lung cancer is the leading cause of cancer-related deaths worldwide. The relatively poor cure rate in lung cancer patients has been associated with a resistance to chemotherapy and radiation that is at least in part related to defects in cellular apoptotic machinery. Exploitation of another form of cell death, autophagy, has the capacity to improve the therapeutic gain of current therapies. In an effort to develop novel treatment strategies to enhance the therapeutic ratio for lung cancer, we...

  18. Occupational lung cancer

    International Nuclear Information System (INIS)

    A total of 592 cases of occupational lung cancer were recorded in the Czech Republic during the 1992 to 1999 period. Ionizing radiation was the causal etiological factor in 92% cases. Uranium miners constituted the group which was affected most. Primary and secondary prevention measures are highlighted and the procedure for assessing occupational lung cancer from radioactive substances is outlined. The basic principles of a rational interdisciplinary collaboration in investigating the occupational nature of lung cancer and the mandatory assessment criteria are discussed

  19. Epigenetics of Lung Cancer

    OpenAIRE

    Langevin, Scott M; Kratzke, Robert A.; Kelsey, Karl T.

    2014-01-01

    Lung cancer is the leading cause of cancer-related mortality in the United States. Epigenetic alterations, including DNA methylation, histone modifications, and non-coding RNA expression, have widely been reported in the literature to play a major role in the genesis of lung cancer. The goal of this review is to summarize the common epigenetic changes associated with lung cancer to give some clarity to its etiology, and provide an overview of the potential translational applications of these ...

  20. Bearing Health Assessment Based on Chaotic Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Lu

    2013-01-01

    Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

  1. Nonrespiratory lung function

    International Nuclear Information System (INIS)

    The function of the lungs is primarily the function as a gas exchanger: the venous blood returning to the lungs is arterialized with oxygen in the lungs and the arterialized blood is sent back again to the peripheral tissues of the whole body to be utilized for metabolic oxygenation. Besides the gas exchanging function which we call ''respiratory lung function'' the lungs have functions that have little to do with gas exchange itself. We categorically call the latter function of the lungs as ''nonrespiratory lung function''. The lungs consist of the conductive airways, the gas exchanging units like the alveoli, and the interstitial space that surrounds the former two compartments. The interstitial space contains the blood and lymphatic capillaries, collagen and elastic fibers and cement substances. The conductive airways and the gas exchanging units are directly exposed to the atmosphere that contains various toxic and nontoxic gases, fume and biological or nonbiological particles. Because the conductive airways are equipped with defense mechanisms like mucociliary clearance or coughs to get rid of these toxic gases, particles or locally produced biological debris, we are usually free from being succumbed to ill effects of inhaled materials. By use of nuclear medicine techniques, we can now evaluate mucociliary clearance function, and other nonrespiratory lung functions as well in vivo

  2. Epidemiology of Lung Cancer.

    Science.gov (United States)

    Schwartz, Ann G; Cote, Michele L

    2016-01-01

    Lung cancer continues to be one of the most common causes of cancer death despite understanding the major cause of the disease: cigarette smoking. Smoking increases lung cancer risk 5- to 10-fold with a clear dose-response relationship. Exposure to environmental tobacco smoke among nonsmokers increases lung cancer risk about 20%. Risks for marijuana and hookah use, and the new e-cigarettes, are yet to be consistently defined and will be important areas for continued research as use of these products increases. Other known environmental risk factors include exposures to radon, asbestos, diesel, and ionizing radiation. Host factors have also been associated with lung cancer risk, including family history of lung cancer, history of chronic obstructive pulmonary disease and infections. Studies to identify genes associated with lung cancer susceptibility have consistently identified chromosomal regions on 15q25, 6p21 and 5p15 associated with lung cancer risk. Risk prediction models for lung cancer typically include age, sex, cigarette smoking intensity and/or duration, medical history, and occupational exposures, however there is not yet a risk prediction model currently recommended for general use. As lung cancer screening becomes more widespread, a validated model will be needed to better define risk groups to inform screening guidelines. PMID:26667337

  3. Parasitic diseases of lungs

    International Nuclear Information System (INIS)

    Roentgenologic semiotics of the main parasitic diseases of lungs is described: echinococcosis, paragonimiasis, cysticercosis, toxoplasmosis, ascariasis, amebiosis and some rarely met parasitic diseases

  4. Hydrodynamic bearing for light loaded turbo machinery

    International Nuclear Information System (INIS)

    The rotor of any turbo-machinery running in journal bearings is prone to two types of well-known vibrations. Synchronous Vibrations occur due to run out or forces resulting from unbalancing of the shaft. Sub synchronous vibrations are more serious, this phenomenon is commonly associated with oil film forces of the journal bearing. In order to avoid sub synchronous vibrations, different types of journal bearings having helical grooves were investigated both theoretically and experimentally. (author)

  5. Probabilistic Aspect of Rolling Bearings Durability

    OpenAIRE

    Styp-Rekowski, Michał

    2007-01-01

    Many factors generate situations that real dimensions of each machine elements are different from nominal ones. In the case of rolling bearings elements mentioned disagreements are small - their values are rank of micrometers. However, such small differences can generate significant changes of operational features of bearings. The analysis of influence of ball dimensional deviation on load distribution in ball bearings is presented in this paper. The probability of occurrence of ball diameter...

  6. A miniature tilting pad gas lubricated bearing

    Science.gov (United States)

    Sixsmith, H.; Swift, W. L.

    1983-12-01

    This paper describes the design and development of a miniature tilting pad gas bearing developed for use in very small turbomachines. The bearings have been developed for cryogenic turboexpanders with shaft diameters down to about 0.3 cm and rotational speeds up to one million rpm. Cryogenic expansion turbines incorporating this type of bearing should be suitable for refrigeration rates down to about 10 w.

  7. Bearing fault diagnosis based on vibration signals.

    OpenAIRE

    Abdusslam, S.A.; Gu, Fengshou; Ball, Andrew

    2009-01-01

    The vibration signal obtained from operating machines contains information relating to machine condition as well as noise. Further processing of the signal is necessary to elicit information particularly relevant to bearing faults. Many techniques have been employed to process the vibration signals in bearing faults detection and diagnosis. Two common techniques, time domain techniques and frequency domain techniques are used in this paper to investigate bearings condition.

  8. 6 Common Cancers - Lung Cancer

    Science.gov (United States)

    ... Home Current Issue Past Issues 6 Common Cancers - Lung Cancer Past Issues / Spring 2007 Table of Contents For ... for Desperate Housewives. (Photo ©2005 Kathy Hutchins / Hutchins) Lung Cancer Lung cancer causes more deaths than the next ...

  9. Flavorings-Related Lung Disease

    Science.gov (United States)

    ... fully expand the lungs). Lung volumes may show hyperinflation (i.e., too much air in the lungs ... X-rays are usually normal but may show hyperinflation. High-resolution computerized tomography (HRCT) scans of the ...

  10. Interstitial lung disease - adults - discharge

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000016.htm Interstitial lung disease - adults - discharge To use the sharing features ... your breathing problems that are caused by interstitial lung disease. This disease scars your lungs, which makes ...

  11. 6 Common Cancers - Lung Cancer

    Science.gov (United States)

    ... Bar Home Current Issue Past Issues 6 Common Cancers - Lung Cancer Past Issues / Spring 2007 Table of Contents ... Desperate Housewives. (Photo ©2005 Kathy Hutchins / Hutchins) Lung Cancer Lung cancer causes more deaths than the next three ...

  12. R+D works for the further development of high temperature reactors. (1) Captive bearing experiments for active magnetic bearings. (2) Captive bearing test for HTR blowers

    International Nuclear Information System (INIS)

    When using active magnetic bearings as blower shaft bearings, blower motors and bearings must be protected against mechanical damage in case of faults (example: total electrical supply failure due to the supply cables breaking). So-called captive bearings are provided, in order to be able to shut the blowers down safely in such faults. These captive bearings are roller bearings which are additionally fitted in the area of the blower shaft bearings, to prevent mechanical contact between the blower rotor and stator. As there was little experience available for the given boundary conditions, such as - speed, - acceleration, - bearing load, - bearing dimensions, - ambient conditions, appropriate development and tests had to be carried out. It was important to determine suitable captive bearings and the necessary ambient conditions, which will make it possible to support the failures of the magnetic bearings to be expected in 40 years' operation of the reactor without damage and to meet the requirements of the captive bearings. (orig./GL)

  13. Bear Capture. Research, and Request for Consideraton of Releases of Bears at Dahomey NWR in 1996

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A series of memos and correspondences concerning the capture of a bear in Cleveland, MS and release on Dahomey NWR along with graduate research on bears from...

  14. Dynamic modelling and response characteristics of a magnetic bearing rotor system with auxiliary bearings

    Science.gov (United States)

    Free, April M.; Flowers, George T.; Trent, Victor S.

    1995-01-01

    Auxiliary bearings are a critical feature of any magnetic bearing system. They protect the soft iron core of the magnetic bearing during an overload or failure. An auxiliary bearing typically consists of a rolling element bearing or bushing with a clearance gap between the rotor and the inner race of the support. The dynamics of such systems can be quite complex. It is desired to develop a rotordynamic model which describes the dynamic behavior of a flexible rotor system with magnetic bearings including auxiliary bearings. The model is based upon an experimental test facility. Some simulation studies are presented to illustrate the behavior of the model. In particular, the effects of introducing sideloading from the magnetic bearing when one coil fails is studied.

  15. Dynamic modelling and response characteristics of a magnetic bearing rotor system including auxiliary bearings

    Science.gov (United States)

    Free, April M.; Flowers, George T.; Trent, Victor S.

    1993-01-01

    Auxiliary bearings are a critical feature of any magnetic bearing system. They protect the soft iron core of the magnetic bearing during an overload or failure. An auxiliary bearing typically consists of a rolling element bearing or bushing with a clearance gap between the rotor and the inner race of the support. The dynamics of such systems can be quite complex. It is desired to develop a rotor-dynamic model and assess the dynamic behavior of a magnetic bearing rotor system which includes the effects of auxiliary bearings. Of particular interest is the effects of introducing sideloading into such a system during failure of the magnetic bearing. A model is developed from an experimental test facility and a number of simulation studies are performed. These results are presented and discussed.

  16. Long-term bearing wear tests of conventional journal bearings and development of hydrostatic bearings for the LOFT drag-disc turbine transducer

    International Nuclear Information System (INIS)

    The details of a two-year development program concerning materials for use as turbine bearings in a pressurized water reactor environment are reported. Two types of bearings have been examined, both conventional journal bearings and hydrostatic bearings. The results of long-term bearing wear tests conducted at 590 K and 15.1 MPa in water are presented. The feasibility of using hydrostatic bearings for the same transducer is demonstrated

  17. Living in Bear Country: increasing municipal compliance with the Bear Smart Program in British Columbia

    OpenAIRE

    Hamilton, Anthony David

    2011-01-01

    Many communities in British Columbia are grappling with the presence of bears in their communities. The Ministry of Environment (MOE) created the Bear Smart Program in 2002 to assist these communities to prevent human-bear conflict. However, at the end of 2010 only two communities have completed the program. This study draws upon informant interviews and local documentation to develop a better understanding of why communities are participating but not completing the Bear Smart Program. Th...

  18. Irradiation lung injury in lung cancer patients

    International Nuclear Information System (INIS)

    The effect of chest irradiation on pulmonary function was studied in 16 patients with lung cancer and one with malignant thymoma. Radiation pneumonitis was detected by chest radiography in 15 cases (88%), 35 days (average) after the completion of radiation therapy. In these cases the radiation field included the lungs, and the hilar and mediastinal regions. No radiation pneumonitis occurred in the other two patients, receiving only lung field irradiation. Various pulmonary functions were measured in all patients following radiation therapy. Inspiratory reserve volume, inspiratory capacity and diffusing capacity were significantly reduced 1 month and 3 months after the completion of radiotherapy. Furthermore, reduction of vital capacity was found 3 months after treatment. It may be concluded that pulmonary function tests are not useful in predicting the onset of radiation pneumonitis, as chest radiography revealed inflammatory changes before the reduction of pulmonary function was detected. (author)

  19. Journal bearing performance and metrology issues

    Directory of Open Access Journals (Sweden)

    S. Sharma

    2009-01-01

    Full Text Available Purpose: In this paper, a radial clearance of a journal bearings and the metrology of the radial clearance measurement is described.Design/methodology/approach: In this experimental study out-of-roundness and radial clearance of journal bearings were measured with high precision and the impact of their metrology was examined on the specific oil film thickness of the bearing. Some metrological issues were emerged and these should be taken into account when bearings are designed.Findings: An investigation showed that the radial clearance measurements can vary from one measuring device to another and the specified clearance may not necessarily meet the design criteria of specific oil film thickness. The study indicates that the radial clearance measurement can differ from one measuring device to another depending upon the precision that can be achieved by the device. The radius of the bearing or the shaft also varies along the circumference, mainly due to out-of-roundness. The out-of-roundness contributes to the error in radial clearance measurement and hence similar to the cut off length specified with the surface roughness, the out-of-roundness needs to be specified with the radial clearance.Practical implications: The radial clearance of a journal bearing is a key design parameter and bearing performance mainly depends upon this parameter. In this paper was showed that the metrology of the radial clearance measurement plays a significant role and not only that the bearing manufacturer or the user of the bearing is aware of this fact but the bearing designer must also take this fact into account while designing bearingsOriginality/value: This paper showed that The radial clearance is a sensitive micro-geometry parameter and hence metrology plays a vital role in making decisions

  20. Lung Cancer Indicators Recurrence

    Science.gov (United States)

    This study describes prognostic factors for lung cancer spread and recurrence, as well as subsequent risk of death from the disease. The investigators observed that regardless of cancer stage, grade, or type of lung cancer, patients in the study were more

  1. Lycopene and Lung Cancer

    Science.gov (United States)

    Although epidemiological studies have shown dietary intake of lycopene is associated with decreased risk of lung cancer, the effect of lycopene on lung carcinogenesis has not been well studied. A better understanding of lycopene metabolism and the mechanistic basis of lycopene chemoprevention must ...

  2. Lung cancer in women

    Directory of Open Access Journals (Sweden)

    Barrera-Rodriguez R

    2012-12-01

    Full Text Available Raúl Barrera-Rodriguez,1 Jorge Morales-Fuentes2 1Biochemistry and Environmental Medicine Laboratory, National Institute of Respiratory Disease, 2Lung Cancer Medical Service, National Institute of Respiratory Disease, Tlalpan, Mexico City, Distrito Federal, Mexico Both authors contributed equally to this workAbstract: Recent biological advances in tumor research provide clear evidence that lung cancer in females is different from that in males. These differences appear to have a direct impact on the clinical presentation, histology, and outcomes of lung cancer. Women are more likely to present with lung adenocarcinoma, tend to receive a diagnosis at an earlier age, and are more likely to be diagnosed with localized disease. Women may also be more predisposed to molecular aberrations resulting from the carcinogenic effects of tobacco, but do not appear to be more susceptible than men to developing lung cancer. The gender differences found in female lung cancer make it mandatory that gender stratification is used in clinical trials in order to improve the survival rates of patients with lung cancer.Keywords: lung cancer, adenocarcinoma, women, genetic susceptibility, genetic differences, tobacco

  3. MRI of the lung

    Energy Technology Data Exchange (ETDEWEB)

    Kauczor, Hans-Ulrich (ed.) [University Clinic Heidelberg (Germany). Diagnostic and Interventional Radiology

    2009-07-01

    For a long time, only chest X-ray and CT were used to image lung structure, while nuclear medicine was employed to assess lung function. During the past decade significant developments have been achieved in the field of magnetic resonance imaging (MRI), enabling MRI to enter the clinical arena of chest imaging. Standard protocols can now be implemented on up-to-date scanners, allowing MRI to be used as a first-line imaging modality for various lung diseases, including cystic fibrosis, pulmonary hypertension and even lung cancer. The diagnostic benefits stem from the ability of MRI to visualize changes in lung structure while simultaneously imaging different aspects of lung function, such as perfusion, respiratory motion, ventilation and gas exchange. On this basis, novel quantitative surrogates for lung function can be obtained. This book provides a comprehensive overview of how to use MRI for imaging of lung disease. Special emphasis is placed on benign diseases requiring regular monitoring, given that it is patients with these diseases who derive the greatest benefit from the avoidance of ionizing radiation. (orig.)

  4. MRI of the lung

    International Nuclear Information System (INIS)

    For a long time, only chest X-ray and CT were used to image lung structure, while nuclear medicine was employed to assess lung function. During the past decade significant developments have been achieved in the field of magnetic resonance imaging (MRI), enabling MRI to enter the clinical arena of chest imaging. Standard protocols can now be implemented on up-to-date scanners, allowing MRI to be used as a first-line imaging modality for various lung diseases, including cystic fibrosis, pulmonary hypertension and even lung cancer. The diagnostic benefits stem from the ability of MRI to visualize changes in lung structure while simultaneously imaging different aspects of lung function, such as perfusion, respiratory motion, ventilation and gas exchange. On this basis, novel quantitative surrogates for lung function can be obtained. This book provides a comprehensive overview of how to use MRI for imaging of lung disease. Special emphasis is placed on benign diseases requiring regular monitoring, given that it is patients with these diseases who derive the greatest benefit from the avoidance of ionizing radiation. (orig.)

  5. Screening for lung cancer

    DEFF Research Database (Denmark)

    Infante, Maurizio V; Pedersen, Jesper H

    2010-01-01

    In lung cancer screening with low-dose spiral computed tomography (LDCT), the proportion of stage I disease is 50-85%, and the survival rate for resected stage I disease can exceed 90%, but proof of real benefit in terms of lung cancer mortality reduction must come from the several randomized...

  6. Active magnetic bearing-supported rotor with misaligned cageless backup bearings: A dropdown event simulation model

    Science.gov (United States)

    Halminen, Oskari; Kärkkäinen, Antti; Sopanen, Jussi; Mikkola, Aki

    2015-01-01

    Active magnetic bearings (AMB) offer considerable benefits compared to regular mechanical bearings. On the other hand, they require backup bearings to avoid damage resulting from a failure in the component itself, or in the power or control system. During a rotor-bearing contact event - when the magnetic field has disappeared and the rotor drops on the backup bearings - the structure of the backup bearings has an impact on the dynamic actions of the rotor. In this paper, the dynamics of an active magnetic bearing-supported rotor during contact with backup bearings is studied with a simulation model. Modeling of the backup bearings is done using a comprehensive cageless ball bearing model. The elasticity of the rotor is described using the finite element method (FEM) and the degrees of freedom (DOF) of the system are reduced using component mode synthesis. Verification of the misaligned cageless backup bearings model is done by comparing the simulation results against the measurement results. The verified model with misaligned cageless backup bearings is found to correspond to the features of a real system.

  7. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas the...

  8. Phylogeography of mitochondrial DNA variation in brown bears and polar bears

    Science.gov (United States)

    Shields, Gerald F.; Adams, Deborah; Garner, Gerald; Labelle, Martine; Pietsch, Jacy; Ramsay, Malcolm; Schwartz, Charles; Titus, Kimberly; Williamson, Scott

    2000-01-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples.

  9. Your Lung Operation: After Your Operation

    Medline Plus

    Full Text Available ... Surgeons Education Patients and Family Skills Programs Your Lung Operation Your Lung Operation DVD After Your Operation Back to Your Lung Operation Your Lung Operation DVD Welcome Your Lung ...

  10. Lung cancer - non-small cell

    Science.gov (United States)

    Cancer - lung - non-small cell; Non-small cell lung cancer; NSCLC; Adenocarcinoma - lung; Squamous cell carcinoma - lung ... Horn L, Eisenberg R, Gius D, et al. Cancer of the lung. In: Niederhuber JE, Armitage JO, Doroshow JH, Kastan ...

  11. Estimation of Lung Ventilation

    Science.gov (United States)

    Ding, Kai; Cao, Kunlin; Du, Kaifang; Amelon, Ryan; Christensen, Gary E.; Raghavan, Madhavan; Reinhardt, Joseph M.

    Since the primary function of the lung is gas exchange, ventilation can be interpreted as an index of lung function in addition to perfusion. Injury and disease processes can alter lung function on a global and/or a local level. MDCT can be used to acquire multiple static breath-hold CT images of the lung taken at different lung volumes, or with proper respiratory control, 4DCT images of the lung reconstructed at different respiratory phases. Image registration can be applied to this data to estimate a deformation field that transforms the lung from one volume configuration to the other. This deformation field can be analyzed to estimate local lung tissue expansion, calculate voxel-by-voxel intensity change, and make biomechanical measurements. The physiologic significance of the registration-based measures of respiratory function can be established by comparing to more conventional measurements, such as nuclear medicine or contrast wash-in/wash-out studies with CT or MR. An important emerging application of these methods is the detection of pulmonary function change in subjects undergoing radiation therapy (RT) for lung cancer. During RT, treatment is commonly limited to sub-therapeutic doses due to unintended toxicity to normal lung tissue. Measurement of pulmonary function may be useful as a planning tool during RT planning, may be useful for tracking the progression of toxicity to nearby normal tissue during RT, and can be used to evaluate the effectiveness of a treatment post-therapy. This chapter reviews the basic measures to estimate regional ventilation from image registration of CT images, the comparison of them to the existing golden standard and the application in radiation therapy.

  12. Methods and systems for micro bearings

    Science.gov (United States)

    Stalford, Harold L.

    2012-10-09

    A micro drive assembly may comprise a substrate, a micro shall oriented in-plane with the substrate and at least one micro bearing to support rotation of the micro shaft. The micro shaft and micro bearing may be in or less than the micrometer domain.

  13. Can polar bear hairs absorb environmental energy?

    Directory of Open Access Journals (Sweden)

    He Ji-Huan

    2011-01-01

    Full Text Available A polar bear (Ursus maritimus has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  14. 33 CFR 117.543 - Bear Creek.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Bear Creek. 117.543 Section 117.543 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Maryland § 117.543 Bear Creek. (a) The draws of the...

  15. Friction coefficients of PTFE bearing liner

    Science.gov (United States)

    Daniels, C. M.

    1979-01-01

    Data discusses frictional characteristics of PTFE (polytetrafluoroethylene) under temperature extremes and in vacuum environment. Tests were also run on reduced scale hardware to determine effects of vacuum. Data is used as reference by designers of aircraft-control system rod-end bearings and for bearings used in polar regions.

  16. Movie Director Bags a Silver Bear

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Chinese director and film writer Wang Xiaoshuai has walked away with the Silver Bear award at the 58th Berlin International Film Festival for best script of Zuo You, or In Love We Trust. Back in 2001, Wang won his first Silver Bear award for directing Beijing

  17. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    2005-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coe±cients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 [1]and described further in 1972 [2]. Several authors have re¯ned this method...... over the years. In 1966 Jorgen W. Lund [5]published an approach to ¯nd the dynamic coe±cients of a journal bearing by a ¯rst order perturbation of the Reynold's equation. These coe±cients made it possible to perform a rotor-bearing stability analysis for a statically loaded bearing. In the mid...... seventies Jorgen W. Lund pointed out in lecture notes that the dynamic damping coe±cients of the bearing could be used to ¯nd the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for ¯nding the damping coe±cients in this work, but the...

  18. Experimental investigations of active air bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar; Morosi, Stefano

    2012-01-01

    greatest challenges in a high-speed gas bearing design. A great deal of research is devoted to attack such issues, where most propose passive designs such as compliant foil bearings, tilting pad and flexure pivot gas bearings. These solutions proved to be effective in improving static and dynamic......Along with traditional oil lubrication, increasing demand for high-speed applications has renewed attention to gas bearings technology. Traditional aerostatic and aerodynamic gas lubrication has been widely used in a variety of applications, ranging from high-speed spindles to micro and meso......-scale turbomachinery. The present paper deals with experimental rotordynamic testing of a flexible rotor supported by hybrid aerostaticaerodynamic gas journal bearing equipped with an electronic radial air injection system. From a rotordynamic point of view there are two phenomena that limit the widespread of...

  19. EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

    OpenAIRE

    Jarosław KACZOR

    2014-01-01

    Durability deep groove ball bearings depends on factors (called attributes) design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bea...

  20. Analysis of speckle patterns in phase-contrast images of lung tissue

    Science.gov (United States)

    Kitchen, M. J.; Paganin, D.; Lewis, R. A.; Yagi, N.; Uesugi, K.

    2005-08-01

    Propagation-based phase-contrast images of mice lungs have been obtained at the SPring-8 synchrotron research facility. Such images exhibit a speckled intensity pattern that bears a superficial resemblance to alveolar structures. This speckle results from focussing effects as projected air-filled alveoli form aberrated compound refractive lenses. An appropriate phase-retrieval algorithm has been utilized to reconstruct the approximate projected lung tissue thickness from single-phase-contrast mice chest radiographs. The results show projected density variations across the lung, highlighting regions of low density corresponding to air-filled regions. Potentially, this offers a better method than conventional radiography for detecting lung diseases such as fibrosis, emphysema and cancer, though this has yet to be demonstrated. As such, the approach can assist in continuing studies of lung function utilizing propagation-based phase-contrast imaging.

  1. On the origin of speckle in x-ray phase contrast images of lung tissue

    International Nuclear Information System (INIS)

    Phase contrast x-ray imaging of small animal lungs reveals a speckled intensity pattern not seen in other tissues, making the lungs highly visible in comparison to other organs. Although bearing a superficial resemblance to alveoli, the cause of this speckle has not been established. With a view to determining the mechanism for the formation of speckle, this paper details the results of propagation-based phase contrast experiments performed on mice lungs, together with packed glass microspheres used to emulate lung tissue. These experimental studies are compared to numerical simulations, based on wave propagation techniques. We find that speckle arises from focusing effects, with multiple alveoli acting as aberrated compound refractive lenses. Both experiments and modelling suggest that this speckle-formation phenomenon may lead to better screening methods for human lungs than conventional radiography

  2. Analysis of speckle patterns in phase-contrast images of lung tissue

    Energy Technology Data Exchange (ETDEWEB)

    Kitchen, M.J. [School of Physics and Materials Engineering, Monash University, Victoria 3800 (Australia)]. E-mail: Marcus.Kitchen@spme.monash.edu.au; Paganin, D. [School of Physics and Materials Engineering, Monash University, Victoria 3800 (Australia); Lewis, R.A. [School of Physics and Materials Engineering, Monash University, Victoria 3800 (Australia); Yagi, N. [Japan Synchrotron Radiation Research Institute (JASRI), SPring-8, Hyogo 679-5198 (Japan); Uesugi, K. [Japan Synchrotron Radiation Research Institute (JASRI), SPring-8, Hyogo 679-5198 (Japan)

    2005-08-11

    Propagation-based phase-contrast images of mice lungs have been obtained at the SPring-8 synchrotron research facility. Such images exhibit a speckled intensity pattern that bears a superficial resemblance to alveolar structures. This speckle results from focussing effects as projected air-filled alveoli form aberrated compound refractive lenses. An appropriate phase-retrieval algorithm has been utilized to reconstruct the approximate projected lung tissue thickness from single-phase-contrast mice chest radiographs. The results show projected density variations across the lung, highlighting regions of low density corresponding to air-filled regions. Potentially, this offers a better method than conventional radiography for detecting lung diseases such as fibrosis, emphysema and cancer, though this has yet to be demonstrated. As such, the approach can assist in continuing studies of lung function utilizing propagation-based phase-contrast imaging.

  3. On the origin of speckle in x-ray phase contrast images of lung tissue

    Energy Technology Data Exchange (ETDEWEB)

    Kitchen, M J [Centre for X-ray Physics and Imaging, School of Physics and Materials Engineering, Monash University, VIC 3800 (Australia); Paganin, D [Centre for X-ray Physics and Imaging, School of Physics and Materials Engineering, Monash University, VIC 3800 (Australia); Lewis, R A [Centre for X-ray Physics and Imaging, School of Physics and Materials Engineering, Monash University, VIC 3800 (Australia); Yagi, N [SPring-8/JASRI, Mikazuki, Hyogo 679-5198 (Japan); Uesugi, K [SPring-8/JASRI, Mikazuki, Hyogo 679-5198 (Japan); Mudie, S T [Centre for X-ray Physics and Imaging, School of Physics and Materials Engineering, Monash University, VIC 3800 (Australia)

    2004-09-21

    Phase contrast x-ray imaging of small animal lungs reveals a speckled intensity pattern not seen in other tissues, making the lungs highly visible in comparison to other organs. Although bearing a superficial resemblance to alveoli, the cause of this speckle has not been established. With a view to determining the mechanism for the formation of speckle, this paper details the results of propagation-based phase contrast experiments performed on mice lungs, together with packed glass microspheres used to emulate lung tissue. These experimental studies are compared to numerical simulations, based on wave propagation techniques. We find that speckle arises from focusing effects, with multiple alveoli acting as aberrated compound refractive lenses. Both experiments and modelling suggest that this speckle-formation phenomenon may lead to better screening methods for human lungs than conventional radiography.

  4. Lung Cancer Screening Update.

    Science.gov (United States)

    Ruchalski, Kathleen L; Brown, Kathleen

    2016-07-01

    Since the release of the US Preventive Services Task Force and Centers for Medicare and Medicaid Services recommendations for lung cancer screening, low-dose chest computed tomography screening has moved from the research arena to clinical practice. Lung cancer screening programs must reach beyond image acquisition and interpretation and engage in a multidisciplinary effort of clinical shared decision-making, standardization of imaging and nodule management, smoking cessation, and patient follow-up. Standardization of radiologic reports and nodule management will systematize patient care, provide quality assurance, further reduce harm, and contain health care costs. Although the National Lung Screening Trial results and eligibility criteria of a heavy smoking history are the foundation for the standard guidelines for low-dose chest computed tomography screening in the United States, currently only 27% of patients diagnosed with lung cancer would meet US lung cancer screening recommendations. Current and future efforts must be directed to better delineate those patients who would most benefit from screening and to ensure that the benefits of screening reach all socioeconomic strata and racial and ethnic minorities. Further optimization of lung cancer screening program design and patient eligibility will assure that lung cancer screening benefits will outweigh the potential risks to our patients. PMID:27306387

  5. Adult lung stem cells and their contribution to lung tumourigenesis

    OpenAIRE

    Asselin-Labat, Marie-Liesse; Filby, Caitlin E

    2012-01-01

    The isolation and characterization of lung stem and progenitor cells represent an important step towards the understanding of lung repair after injury, lung disease pathogenesis and the identification of the target cells of transformation in lung carcinogenesis. Different approaches using prospective isolation of progenitor cells by flow cytometry or lineage-tracing experiments in mouse models of lung injury have led to the identification of distinct progenitor subpopulations in different mor...

  6. Herniation of malignant lung cavity

    Institute of Scientific and Technical Information of China (English)

    Saurabh Kumar Singh; Rakesh Bhargava; Zuber Ahmad; Deepak K.Pandey; Shirin Naaz; Vibhanshu Gupta

    2008-01-01

    @@ Hernia of the lung is defined as a protrusion of lung tissue,covered by parietal and visceral pleurae,through an abnormal opening in the chest wall,diaphragm or mediastinum.1 It is a relatively uncommon condition.We report a case of lung hernia following cavitation in malignant lung mass.

  7. Gold-induced lung disease.

    OpenAIRE

    Heyd, J.; Simmeran, A.

    1983-01-01

    A 70-year-old female with seronegative rheumatoid arthritis developed interstitial pneumonitis while on chrysotherapy. The reversibility of lung disease and favourable response to steroid treatment support the diagnosis of gold-induced lung disease and distinguish this entity from other forms of interstitial lung disease associated with rheumatoid arthritis. The relevant literature related to gold-induced lung disease is briefly reviewed.

  8. Alcoholic Lung Disease

    OpenAIRE

    Kershaw, Corey D.; Guidot, David M.

    2008-01-01

    In addition to its well-known association with lung infection (i.e., pneumonia), alcohol abuse now is recognized as an independent factor that increases by three- to four-fold the incidence of the acute respiratory distress syndrome, a severe form of acute lung injury with a mortality rate of 40 to 50 percent. This translates to tens of thousands of excess deaths in the United States each year from alcohol-mediated lung injury, which is comparable to scarring of the liver (i.e., cirrhosis) in...

  9. Women and lung cancer.

    OpenAIRE

    Itri, L

    1987-01-01

    Lung cancer has now surpassed breast cancer as the leading cause of cancer deaths in American women. In 1986, 49,000 women were diagnosed as having lung cancer; only 16 percent of them will survive 5 years or more. Cigarette smoking is unquestionably the leading contributing factor. Large numbers of women took up cigarette smoking during and after World War II. The grim aftermath has taken 20 years to surface--between 1950 and 1985, lung cancer deaths in women increased 500 percent. Even wors...

  10. Bioengineering Lungs for Transplantation.

    Science.gov (United States)

    Gilpin, Sarah E; Charest, Jonathan M; Ren, Xi; Ott, Harald C

    2016-05-01

    Whole lung extracellular matrix scaffolds can be created by perfusion of cadaveric organs with decellularizing detergents, providing a platform for organ regeneration. Lung epithelial engineering must address both the proximal airway cells that function to metabolize toxins and aid mucociliary clearance and the distal pneumocytes that facilitate gas exchange. Engineered pulmonary vasculature must support in vivo blood perfusion with low resistance and intact barrier function and be antithrombotic. Repopulating the native lung matrix with sufficient cell numbers in appropriate anatomic locations is required to enable organ function. PMID:27112255

  11. Microgravity and the lung

    Science.gov (United States)

    West, John B.

    1991-01-01

    Results are presented from studies of the effect of microgravity on the lungs of rats flown on the Cosmos 2044 mission, and from relevant laboratory experiments. The effects of microgravity fall into five categories: topographical structure and function, the lung volumes and mechanics, the intrathoracic blood pressures and volumes, the pulmonary deposition of aerosol, and denitrogenaton during EVA. The ultrastructure of the left lungs of rats flown for 14 days on the Cosmos 2044 spacecraft and that of some tail-suspended rats disclosed presence of red blood cells in the alveolar spaces, indicating that pulmonary hemorrhage and pulmonary edema occurred in these rats. Possible causes for this phenomenon are discussed.

  12. Postnatal human lung growth.

    OpenAIRE

    Thurlbeck, W. M.

    1982-01-01

    Standard morphometric methods were applied to the lungs of 36 boys and 20 girls aged from 6 weeks to 14 years, dying as a result of trauma or after short illnesses. Individual lung units, alveolar dimensions, and number of alveoli per unit area and volume did not differ between boys and girls, but boys had bigger lungs than girls for the same stature. This resulted in a larger total number of alveoli and a larger aveolar surface area in boys than in girls for a given age and stature. There ma...

  13. Lung cysts in chronic paracoccidioidomycosis

    Directory of Open Access Journals (Sweden)

    Andre Nathan Costa

    2013-06-01

    Full Text Available On HRCT scans, lung cysts are characterized by rounded areas of low attenuation in the lung parenchyma and a well-defined interface with the normal adjacent lung. The most common cystic lung diseases are lymphangioleiomyomatosis, Langerhans cell histiocytosis, and lymphocytic interstitial pneumonia. In a retrospective analysis of the HRCT findings in 50 patients diagnosed with chronic paracoccidioidomycosis, we found lung cysts in 5 cases (10%, indicating that patients with paracoccidioidomycosis can present with lung cysts on HRCT scans. Therefore, paracoccidioidomycosis should be included in the differential diagnosis of cystic lung diseases.

  14. Inhalation treatment of lung cancer: the influence of composition, size and shape of nanocarriers on their lung accumulation and retention

    International Nuclear Information System (INIS)

    Various nanoparticles have been designed and tested in order to select optimal carriers for the inhalation delivery of anticancer drugs to the lungs. The following nanocarriers were studied: micelles, liposomes, mesoporous silica nanoparticles (MSNs), poly propyleneimine (PPI) dendrimer-siRNA complexes nanoparticles, quantum dots (QDs), and poly (ethylene glycol) polymers. All particles were characterized using the following methods: dynamic light scattering, zeta potential, atomic force microscopy, in vitro cyto- and genotoxicity. In vivo organ distribution of all nanoparticles, retention in the lungs, and anticancer effects of liposomes loaded with doxorubicin were examined in nude mice after the pulmonary or intravenous delivery. Significant differences in lung uptake were found after the inhalation delivery of lipid-based and non-lipid-based nanoparticles. The accumulation of liposomes and micelles in lungs remained relatively high even 24 h after inhalation when compared with MSNs, QDs, and PPI dendrimers. There were notable differences between nanoparticle accumulation in the lungs and other organs 1 and 3 h after inhalation or intravenous administrations, but 24 h after intravenous injection all nanoparticles were mainly accumulated in the liver, kidneys, and spleen. Inhalation delivery of doxorubicin by liposomes significantly enhanced its anticancer effect and prevented severe adverse side effects of the treatment in mice bearing the orthotopic model of lung cancer. The results of the study demonstrate that lipid-based nanocarriers had considerably higher accumulation and longer retention time in the lungs when compared with non-lipid-based carriers after the inhalation delivery. These particles are most suitable for effective inhalation treatment of lung cancer

  15. Genomic sequencing of Pleistocene cave bears

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

    2005-04-01

    Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

  16. Passive Magnetic Bearing With Ferrofluid Stabilization

    Science.gov (United States)

    Jansen, Ralph; DiRusso, Eliseo

    1996-01-01

    A new class of magnetic bearings is shown to exist analytically and is demonstrated experimentally. The class of magnetic bearings utilize a ferrofluid/solid magnet interaction to stabilize the axial degree of freedom of a permanent magnet radial bearing. Twenty six permanent magnet bearing designs and twenty two ferrofluid stabilizer designs are evaluated. Two types of radial bearing designs are tested to determine their force and stiffness utilizing two methods. The first method is based on the use of frequency measurements to determine stiffness by utilizing an analytical model. The second method consisted of loading the system and measuring displacement in order to measure stiffness. Two ferrofluid stabilizers are tested and force displacement curves are measured. Two experimental test fixtures are designed and constructed in order to conduct the stiffness testing. Polynomial models of the data are generated and used to design the bearing prototype. The prototype was constructed and tested and shown to be stable. Further testing shows the possibility of using this technology for vibration isolation. The project successfully demonstrated the viability of the passive magnetic bearing with ferrofluid stabilization both experimentally and analytically.

  17. Intelligent monitoring of ball bearing conditions

    Science.gov (United States)

    Liu, T. I.; Mengel, J. M.

    1992-09-01

    Ball bearings are widely used in various kinds of robots, manufacturing machines, and equipment. In order to enhance productivity and improve product quality, an on-line monitoring system is essential to check the status of ball bearings. In this work, peak amplitude in the frequency domain, peak RMS, and the power spectrum were used as indirect indices to develop a system for monitoring and classifying ball bearing defects. These indices were then processed by artificial neural networks. Six different cases of ball bearing states were observed. The data from these observations were then input into neural networks with different architectures to train these neural networks in a learning process. All the trained neural networks are capable of distinguishing the normal bearings from defective bearings with a 100 percent success rate. They can also classify the bearing conditions into six different states with a success rate of up to 97 per cent. The effects of training set sizes and neural network structures on the monitoring performance have also been investigated.

  18. The biokinetics of four 239Pu/241Am dioxide bearing dusts in the rat after inhalation: the implications for occupational exposure

    International Nuclear Information System (INIS)

    The aims of the work described here were to provide an experimental basis for evaluating the committed effective dose equivalent per unit intake together with the ALI for four industrial oxide bearing dusts, and to assess the extent to which 241Am could be used for estimating the 239Pu content of the lung after an accidental intake of these materials. (author)

  19. Design of gas bearing systems for precision applications

    Science.gov (United States)

    Wang, Junming

    Research to provide the up to date knowledge and efficient tools to design better Externally Pressurized Gas (EPG) bearing systems, including the design of individual bearings, and to arrange all the bearings used in an optimal way is reported. Both circular and rectangular EPG pads with rigid bearing surfaces and rigid inlet restrictors were used. The following topics closely related to the applications in precision engineering are discussed: influences of gap shape on the bearing performance; effects of bearing body tilt on the bearing performance; influences of bearing surface imperfections on bearing performance; temperature drops in EPG bearings in quasistationary conditions; the optimal use of multiple bearings in a mechanical system; the use of EPG bearing damping characteristics in the design; and the effects of motion velocity.

  20. Future bearing surfaces in total hip arthroplasty.

    Science.gov (United States)

    Chang, Jun-Dong

    2014-03-01

    One of the most important issues in the modern total hip arthroplasty (THA) is the bearing surface. Extensive research on bearing surfaces is being conducted to seek an ideal bearing surface for THA. The ideal bearing surface for THA should have superior wear characteristics and should be durable, bio-inert, cost-effective, and easy to implant. However, bearing surfaces that are currently being implemented do not completely fulfill these requirements, especially for young individuals for whom implant longevity is paramount. Even though various new bearing surfaces have been investigated, research is still ongoing, and only short-term results have been reported from clinical trials. Future bearing surfaces can be developed in the following ways: (1) change in design, (2) further improvement of polyethylene, (3) surface modification of the metal, (4) improvement in the ceramic, and (5) use of alternative, new materials. One way to reduce wear and impingement in THA is to make changes in its design by using a large femoral head, a monobloc metal shell with preassembled ceramic liner, dual mobility cups, a combination of different bearing surfaces, etc. Polyethylene has improved over time with the development of highly crosslinked polyethylene. Further improvements can be made by reinforcing it with vitamin E or multiwalled carbon nanotubes and by performing a surface modification with a biomembrane. Surface modifications with titanium nitride or titanium niobium nitride are implemented to try to improve the metal bearings. The advance to the fourth generation ceramics has shown relatively promising results, even in young patients. Nevertheless, further improvement is required to reduce fragility and squeaking. Alternative materials like diamond coatings on surfaces, carbon based composite materials, oxidized zirconium, silicon nitride, and sapphire are being sought. However, long-term studies are necessary to confirm the efficacy of these surfaces after enhancements

  1. Compressor ported shroud for foil bearing cooling

    Science.gov (United States)

    Elpern, David G.; McCabe, Niall; Gee, Mark

    2011-08-02

    A compressor ported shroud takes compressed air from the shroud of the compressor before it is completely compressed and delivers it to foil bearings. The compressed air has a lower pressure and temperature than compressed outlet air. The lower temperature of the air means that less air needs to be bled off from the compressor to cool the foil bearings. This increases the overall system efficiency due to the reduced mass flow requirements of the lower temperature air. By taking the air at a lower pressure, less work is lost compressing the bearing cooling air.

  2. Corporate risks, risk bearing ability and equity

    OpenAIRE

    Handschin, Lukas

    2011-01-01

    There is a relation between corporate risks, risk bearing ability and equity. In order to assess the risk bearing ability of a corporation, one reference figure is equity, understood as the sum of legal capital and reserves, free reserves and accrued profits. Equity shows the risk bearing ability related to the risk of asset reduction as well as the ability of the corporation to attract new liquidity by increasing debts, in case of a negative free cash flow. Equity is the risk reserve of the ...

  3. Hydrostatic, aerostatic and hybrid bearing design

    CERN Document Server

    Rowe, W Brian

    2012-01-01

    Solve your bearing design problems with step-by-step procedures and hard-won performance data from a leading expert and consultant Compiled for ease of use in practical design scenarios, Hydrostatic, Aerostatic and Hybrid Bearing Design provides the basic principles, design procedures and data you need to create the right bearing solution for your requirements. In this valuable reference and design companion, author and expert W. Brian Rowe shares the hard-won lessons and figures from a lifetime's research and consultancy experience. Coverage includes: Clear e

  4. Microeconomic analysis of military aircraft bearing restoration

    Science.gov (United States)

    Hein, G. F.

    1976-01-01

    The risk and cost of a bearing restoration by grinding program was analyzed. A microeconomic impact analysis was performed. The annual cost savings to U.S. Army aviation is approximately $950,000.00 for three engines and three transmissions. The capital value over an indefinite life is approximately ten million dollars. The annual cost savings for U.S. Air Force engines is approximately $313,000.00 with a capital value of approximately 3.1 million dollars. The program will result in the government obtaining bearings at lower costs at equivalent reliability. The bearing industry can recover lost profits during a period of reduced demand and higher costs.

  5. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    The use of fluid power to reduce and control rotor vibration in rotating machines is investigated. An active hybrid bearing is studied, whose main objective is to reduce wear and vibration between rotating and stationary machinery parts. By injecting pressurised oil into the oil film, through...... orifices machined in the bearing pads, one can alter the machine dynamic characteristics, thus enhancing its operational range. A mathematical model of the rotor-bearing system, as well as of the hydraulic system, is presented. Numerical results of the system frequency response show good agreement with...

  6. Platelets in Lung Biology

    Science.gov (United States)

    Weyrich, Andrew S.; Zimmerman, Guy A.

    2013-01-01

    Platelets and the lungs have an intimate relationship. Platelets are anucleate mammalian blood cells that continuously circulate through pulmonary vessels and that have major effector activities in hemostasis and inflammation. The lungs are reservoirs for megakaryocytes, the requisite precursor cell in thrombopoiesis, which is the intricate process by which platelets are generated. Platelets contribute to basal barrier integrity of the alveolar capillaries, which selectively restricts the transfer of water, proteins, and red blood cells out of the vessels. Platelets also contribute to pulmonary vascular repair. Although platelets bolster hemostatic and inflammatory defense of the healthy lung, experimental evidence and clinical evidence indicate that these blood cells are effectors of injury in a variety of pulmonary disorders and syndromes. Newly discovered biological capacities of platelets are being explored in the context of lung defense, disease, and remodeling. PMID:23043249

  7. Bronchi, Bronchial Tree, & Lungs

    Science.gov (United States)

    ... specific Modules Resources Archived Modules Updates Bronchi, Bronchial Tree, & Lungs Bronchi and Bronchial Tree In the mediastinum , at the level of the ... trachea. As the branching continues through the bronchial tree, the amount of hyaline cartilage in the walls ...

  8. What Are the Lungs?

    Science.gov (United States)

    ... Explore How the Lungs Work What Are... The Respiratory System What Happens When You Breathe What Controls Your ... breathing possible. (For more information, go to "The Respiratory System" section of this article.) Rate This Content: NEXT >> ...

  9. [Hypoxic lung failure].

    Science.gov (United States)

    David, S; Wiesner, O

    2016-04-01

    Hypoxic lung failure is among the major indications for patients' referral to intensive care units either for surveillance or if necessary therapy. There are a vast number of pathophysiological causes of lung failure and the optimal treatment highly depends on the underlying pathology; therefore, no standard algorithm exists. So-called acute respiratory distress syndrome (ARDS) represents a very severe manifestation of hypoxemic lung failure that is of particular relevance for intensivists and is therefore the focus of this review. In addition to fundamental pathophysiology of lung injury, the article also focuses on established and modern treatment strategies. Moreover, we will briefly highlight innovative concepts of ARDS treatment that might become relevant in the future. PMID:27084180

  10. Interstitial lung disease

    Directory of Open Access Journals (Sweden)

    Katerina M. Antoniou

    2014-03-01

    Full Text Available Interstitial lung diseases are a group of diffuse parenchymal lung disorders associated with substantial morbidity and mortality. Knowledge achieved in recent years has resulted in the publication of the new classification of idiopathic interstitial pneumonias, according to which there are three groups: major, rare and unclassified. The novelty of the new classification comes from the fact that difficult to classify entities can be treated according to the disease behaviour classification. Idiopathic pulmonary fibrosis is the most lethal amongst the interstitial lung diseases and presents high heterogeneity in clinical behaviour. A number of biomarkers have been proposed in order to predict the course of the disease and group patients with the same characteristics in clinical trials. Early diagnosis and disease stratification is also important in the field of other interstitial lung diseases.

  11. Lung disease - resources

    Science.gov (United States)

    ... gov/health/dci/Diseases/Asthma/Asthma_WhatIs.html Emphysema/COPD (Chronic Obstructive Pulmonary Disease): COPD Foundation -- www.copdfoundation.org National Emphysema Foundation -- www.emphysemafoundation.org National Heart, Lung, and ...

  12. Ablation of lung tumours

    OpenAIRE

    Gillams, Alice

    2012-01-01

    Abstract Radiofrequency, laser, microwave and cryotherapy have all been used for the ablation of lung tumours. However, radiofrequency ablation (RFA) and microwave ablation are the most widely used technologies. RFA has been successfully applied to tumour measuring from

  13. Interstitial Lung Disease

    Science.gov (United States)

    ... depending on the cause. Importantly, each person responds differently to treatment, so close monitoring during treatment is important. More Interstitial Lung Disease ... a Question Learn About Clinical Trials Find a Doctor Find Departments ...

  14. Lung Diseases and Conditions

    Science.gov (United States)

    ... Share this page from the NHLBI on Twitter. Lung Diseases and Conditions Breathing is a complex process. If ... lead to a disease called COPD (chronic obstructive pulmonary disease). COPD prevents proper airflow in and out of ...

  15. American Lung Association

    Science.gov (United States)

    ... Association's 'Tobacco 21' Initiative to Save Lives of Millennials, Future Generations by Raising Tobacco Sales Age to ... by lung disease. Help us continue to deliver education, advocacy and research to those who need it. $ ...

  16. Interstitial lung disease

    Science.gov (United States)

    ... will receive oxygen therapy in their home . A respiratory therapist will help you set up the oxygen. Families need to learn proper oxygen storage and safety . Lung rehabilitation can provide support, and help you learn: Different ...

  17. Diffuse cavitary lung lesions

    Energy Technology Data Exchange (ETDEWEB)

    Grunzke, Mindy; Garrington, Timothy [University of Colorado Denver, Department of Pediatrics, Aurora, CO (United States); The Children' s Hospital, Rick Wilson Center for Cancer and Blood Disorders, Aurora, CO (United States); Hayes, Kari [The Children' s Hospital, Pediatric Radiology, Aurora, CO (United States); Bourland, Wendy [Children' s Hospital at St. Francis, Warren Clinic, Inc., Tulsa, OK (United States)

    2010-02-15

    An 11-year-old girl presented with a 2-month history of progressively worsening cough, daily fevers, and weight loss. A chest radiograph revealed multiple cystic cavitary lung lesions. An extensive infectious work-up was negative. Chest CT verified multiple cavitary lung lesions bilaterally, and [F-18]2-fluoro-2-deoxy-D-glucose ({sup 18}F-FDG) positron emission tomography with CT (PET/CT) showed increased uptake in the lung lesions as well as regional lymph nodes. Subsequent biopsy of an involved lymph node confirmed classical Hodgkin lymphoma, nodular sclerosis type. This case represents an unusual presentation for a child with Hodgkin lymphoma and demonstrates a role for {sup 18}F-FDG PET/CT in evaluating a child with cavitary lung lesions. (orig.)

  18. Bear bile: dilemma of traditional medicinal use and animal protection

    OpenAIRE

    Nagamatsu Tadashi; Tsao Sai-Wah; Ng Kwan-Ming; Wang Ning; Siu Kayu; Feng Yibin; Tong Yao

    2009-01-01

    Bear bile has been used in Traditional Chinese Medicine (TCM) for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Techn...

  19. Interstitial lung disease

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    2008429 The predictive factors and unfavourable prognostic factors of interstitial lung disease in patients with polymyositis/dermatomyositis. WANG Peizhen(王培珍), et al. Dept Rheumatol & Immunol, Changhai Hosp, Milit Med Univ, Shanghai 200433. Chin J Tuberc Respir Dis 2008;31(6):417-420. Objective To analyze the predictive factors and the unfavourable prognostic factors of interstitial lung disease (ILD) in patients with polymyositis

  20. Lung Parenchymal Mechanics

    OpenAIRE

    Suki, Béla; Stamenovic, Dimitrije; Hubmayr, Rolf

    2011-01-01

    The lung parenchyma comprises a large number of thin-walled alveoli, forming an enormous surface area, which serves to maintain proper gas exchange. The alveoli are held open by the transpulmonary pressure, or prestress, which is balanced by tissues forces and alveolar surface film forces. Gas exchange efficiency is thus inextricably linked to three fundamental features of the lung: parenchymal architecture, prestress, and the mechanical properties of the parenchyma. The prestress is a key de...

  1. Extravascular lung water

    International Nuclear Information System (INIS)

    Extravascular lung water (i d Q wl) is measured in vivo from the difference in mean transit times, computed by extrapolating the dilution curves, of two indicators, one freely diffusible, the other confined to the intravascular space. Using 3H2O it has been shown that i d Q wl is smaller than the amount of extravascular water obtained from the difference between wet and dry lung weight (Q wl). Extrapolation allows one to use dilution curves for a short time, i.e., up to onset of obvious recirculation. Clearing the dilution curves or recirculation by deconvolution extends the observation time, which then becomes limited by sampling duration rather than onset of recirculation. This procedure entails recording recirculating tracers in the pulmonary artery (PA). Dilutions of tracers at input in PA and output in a systemic artery must be related to each other as continuous time functions. This is accomplished by means of a convolution integral. Deconvolution yields the frequency function of water molecule transit time in the extravascular lung space, l(t). In dogs and men, in both normal and edematous lungs, l(t) exhibits a knee and a fairly long tail. Extravascular lung water computed from l(t), i d c Q wl, agrees with Q wl and correlates with data on the extravascular thermal volume of the lung and with radiographic findings of lung edema. A radiographic score of pulmonary edema may be used clinically to assess extravascular lung water in cardiac patients and in patients with adult respiratory distress syndrome. (orig.)

  2. Extravascular lung water

    Energy Technology Data Exchange (ETDEWEB)

    Giuntini, C.; Pistolesi, M.; Miniati, M.; Fazio, F.

    1987-06-01

    Extravascular lung water (i d Q w/sub l/) is measured in vivo from the difference in mean transit times, computed by extrapolating the dilution curves, of two indicators, one freely diffusible, the other confined to the intravascular space. Using /sup 3/H/sub 2/O it has been shown that i d Q w/sub l/ is smaller than the amount of extravascular water obtained from the difference between wet and dry lung weight (Q w/sub l/). Extrapolation allows one to use dilution curves for a short time, i.e., up to onset of obvious recirculation. Clearing the dilution curves or recirculation by deconvolution extends the observation time, which then becomes limited by sampling duration rather than onset of recirculation. This procedure entails recording recirculating tracers in the pulmonary artery (PA). Dilutions of tracers at input in PA and output in a systemic artery must be related to each other as continuous time functions. This is accomplished by means of a convolution integral. Deconvolution yields the frequency function of water molecule transit time in the extravascular lung space, l(t). In dogs and men, in both normal and edematous lungs, l(t) exhibits a knee and a fairly long tail. Extravascular lung water computed from l(t), i d c Q w/sub l/, agrees with Q w/sub l/ and correlates with data on the extravascular thermal volume of the lung and with radiographic findings of lung edema. A radiographic score of pulmonary edema may be used clinically to assess extravascular lung water in cardiac patients and in patients with adult respiratory distress syndrome.

  3. Lungs in Heart Failure

    OpenAIRE

    Anna Apostolo; Giuliano Giusti; Paola Gargiulo; Maurizio Bussotti; Piergiuseppe Agostoni

    2012-01-01

    Lung function abnormalities both at rest and during exercise are frequently observed in patients with chronic heart failure, also in the absence of respiratory disease. Alterations of respiratory mechanics and of gas exchange capacity are strictly related to heart failure. Severe heart failure patients often show a restrictive respiratory pattern, secondary to heart enlargement and increased lung fluids, and impairment of alveolar-capillary gas diffusion, mainly due to an increased resistance...

  4. Multiple cystic lung disease

    OpenAIRE

    Flavia Angélica Ferreira Francisco; Arthur Soares Souza; Gláucia Zanetti; Edson Marchiori

    2015-01-01

    Multiple cystic lung disease represents a diverse group of uncommon disorders that can present a diagnostic challenge due to the increasing number of diseases associated with this presentation. High-resolution computed tomography of the chest helps to define the morphological aspects and distribution of lung cysts, as well as associated findings. The combination of appearance upon imaging and clinical features, together with extrapulmonary manifestations, when present, permits confident and a...

  5. PET in Lung Cancer

    OpenAIRE

    Hans C. Steinert,

    2005-01-01

    Accurate tumor staging is essential for choosing the appropriate treatment strategy inpatients with lung cancer. It has already been shown that FDG-PET is highly accurate inclassifying lung nodules as benign or malignant. Integrated PET-CT enables the exactmatching of focal abnormalities on PET to anatomic structures on CT. PET-CT is superior indiagnostic accuracy for T staging and differentiation between tumor and peritumoral atelectasis.PET has also proved to be a very effective staging mod...

  6. Chemoprevention of Lung Cancer

    OpenAIRE

    Keith, Robert L

    2009-01-01

    Lung cancer is the leading cause of cancer death in the United States, and the majority of diagnoses are made in former smokers. While avoidance of tobacco abuse and smoking cessation clearly will have the greatest impact on lung cancer development, effective chemoprevention could prove to be more effective than treatment of established disease. Chemoprevention is the use of dietary or pharmaceutical agents to reverse or inhibit the carcinogenic process and has been successfully applied to co...

  7. Lung Cancer Chemoprevention

    OpenAIRE

    Keith, Robert L

    2012-01-01

    Lung cancer is the leading cause of cancer death in the United States, and the majority of diagnoses are made in former smokers. Although avoidance of tobacco abuse and smoking cessation clearly will have the greatest impact on lung cancer development, effective chemoprevention could prove to be more effective than treatment of established, advanced-stage disease. Chemoprevention is the use of dietary or pharmaceutical agents to reverse or block the carcinogenic process and has been successfu...

  8. Lung cancer in Australia.

    Science.gov (United States)

    McLennan, G; Roder, D M

    1989-02-20

    Lung cancer is the leading cause of death of cancer in Australian men and the third leading cause in Australian women. Efforts are being made to reduce the incidence of this disease by smoking-cessation programmes and improved industrial hygiene, and these measures need to be encouraged strongly by all sectors of the community. On a population basis, insufficient evidence is available to justify screening procedures for the early detection of lung cancer in "at-risk" groups. Cure is possible by surgical resection in early cases. Improvements in therapeutic results with traditional cancer treatments largely have reached a plateau, but a number of newer therapies, and combinations of standard therapies, currently are being evaluated. Of particular interest is concurrent radiotherapy and chemotherapy in localized non-small-cell lung cancer; laser "debulking" in conjunction with radiotherapy in non-small-cell lung cancer, and biological response-modifying agents in non-small-cell and small-cell lung cancer. It is important that data be collected adequately to define epidemiological changes and to evaluate treatment results (including repeat bronchoscopy, to assess local control of tumour), and that the quality of life is recorded and reported in the evaluation process. Finally, phase-III studies in lung-cancer treatments require adequate numbers of subjects to enable meaningful conclusions to be achieve objectives within a reasonable study period. PMID:2469943

  9. Lung parenchymal mechanics.

    Science.gov (United States)

    Suki, Béla; Stamenović, Dimitrije; Hubmayr, Rolf

    2011-07-01

    The lung parenchyma comprises a large number of thin-walled alveoli, forming an enormous surface area, which serves to maintain proper gas exchange. The alveoli are held open by the transpulmonary pressure, or prestress, which is balanced by tissues forces and alveolar surface film forces. Gas exchange efficiency is thus inextricably linked to three fundamental features of the lung: parenchymal architecture, prestress, and the mechanical properties of the parenchyma. The prestress is a key determinant of lung deformability that influences many phenomena including local ventilation, regional blood flow, tissue stiffness, smooth muscle contractility, and alveolar stability. The main pathway for stress transmission is through the extracellular matrix. Thus, the mechanical properties of the matrix play a key role both in lung function and biology. These mechanical properties in turn are determined by the constituents of the tissue, including elastin, collagen, and proteoglycans. In addition, the macroscopic mechanical properties are also influenced by the surface tension and, to some extent, the contractile state of the adherent cells. This chapter focuses on the biomechanical properties of the main constituents of the parenchyma in the presence of prestress and how these properties define normal function or change in disease. An integrated view of lung mechanics is presented and the utility of parenchymal mechanics at the bedside as well as its possible future role in lung physiology and medicine are discussed. PMID:23733644

  10. Dosimetric lung models

    International Nuclear Information System (INIS)

    The anatomical and physiological factors that vary with age and influence the deposition of airborne radionuclides in the lung are reviewed. The efficiency with which aerosols deposit in the lung for a given exposure at various ages from birth to adulthood is evaluated. Deposition within the lung is considered in relation to the clearance mechanisms acting in different regions or compartments. The procedure for evaluating dose to sensitive tissues in lung and transfer to other organs that is being considered by the Task Group established by ICRP to review the Lung Model is outlined. Examples of the application of this modelling procedure to evaluate lung dose as a function of age are given, for exposure to radon daughters in dwellings, and for exposure to an insoluble 239Pu aerosol. The former represents exposure to short-lived radionuclides that deliver relatively high doses to bronchial tissue. In this case, dose rates are marginally higher in children than in adults. Plutonium exposure represents the case where dose is predominantly delivered to respiratory tissue and lymph nodes. In this case, the life-time doses tend to be lower for exposure in childhood. Some of the uncertainties in this modelling procedure are noted

  11. Multiple cystic lung disease

    Directory of Open Access Journals (Sweden)

    Flavia Angélica Ferreira Francisco

    2015-12-01

    Full Text Available Multiple cystic lung disease represents a diverse group of uncommon disorders that can present a diagnostic challenge due to the increasing number of diseases associated with this presentation. High-resolution computed tomography of the chest helps to define the morphological aspects and distribution of lung cysts, as well as associated findings. The combination of appearance upon imaging and clinical features, together with extrapulmonary manifestations, when present, permits confident and accurate diagnosis of the majority of these diseases without recourse to open-lung biopsy. The main diseases in this group that are discussed in this review are lymphangioleiomyomatosis, pulmonary Langerhans cell histiocytosis and folliculin gene-associated syndrome (Birt–Hogg–Dubé; other rare causes of cystic lung disease, including cystic metastasis of sarcoma, are also discussed. Disease progression is unpredictable, and understanding of the complications of cystic lung disease and their appearance during evolution of the disease are essential for management. Correlation of disease evolution and clinical context with chest imaging findings provides important clues for defining the underlying nature of cystic lung disease, and guides diagnostic evaluation and management.

  12. Multiple cystic lung disease.

    Science.gov (United States)

    Ferreira Francisco, Flavia Angélica; Soares Souza, Arthur; Zanetti, Gláucia; Marchiori, Edson

    2015-12-01

    Multiple cystic lung disease represents a diverse group of uncommon disorders that can present a diagnostic challenge due to the increasing number of diseases associated with this presentation. High-resolution computed tomography of the chest helps to define the morphological aspects and distribution of lung cysts, as well as associated findings. The combination of appearance upon imaging and clinical features, together with extrapulmonary manifestations, when present, permits confident and accurate diagnosis of the majority of these diseases without recourse to open-lung biopsy. The main diseases in this group that are discussed in this review are lymphangioleiomyomatosis, pulmonary Langerhans cell histiocytosis and folliculin gene-associated syndrome (Birt-Hogg-Dubé); other rare causes of cystic lung disease, including cystic metastasis of sarcoma, are also discussed. Disease progression is unpredictable, and understanding of the complications of cystic lung disease and their appearance during evolution of the disease are essential for management. Correlation of disease evolution and clinical context with chest imaging findings provides important clues for defining the underlying nature of cystic lung disease, and guides diagnostic evaluation and management. PMID:26621970

  13. Transient unbalance response of four multilobe journal bearings

    Science.gov (United States)

    Allaire, P. E.; Li, D. F.; Choy, K. C.

    1979-01-01

    This work carries out an analysis of the transient response of four multilobe journal bearings (elliptical, offset, three-lobe, and four-lobe) subject to unbalance both below and above the linearized stability thresholds for the bearings. It extends the work of a previous paper on a balanced rotor in the same four bearing types. Transient orbits, bearing forces, and a numerical fast Fourier transform analysis of the orbits are presented. A comparison of bearing forces above the stability threshold for each bearing indicates that the elliptical bearing has the most violent whirl vibration amplitudes, while the offset bearing exhibits the least amount of subsynchronous vibration.

  14. Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

    Science.gov (United States)

    Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

    2014-01-01

    We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears. PMID:24477675

  15. All Polar Bear Critical Habitat Combined

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This layer shows all categories of polar bear critical habitat combined into one overall polygon. This polygon includes the following critical habitat types: 1)...

  16. Telemetry techniques used on Kodiak brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes the results of a study on the techniques used to monitor the movements of Kodiak brown bears instrumented with radio transmitters. Methods...

  17. Bear Lake-Minidoka - Phragmites Control

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Bear Lake: Phragmites patches were sprayed on the refuge & north of the lake proper. Minidoka: patches along the Snake River & Lake Walcott were treated...

  18. Failure tests of laminated rubber bearings

    International Nuclear Information System (INIS)

    Three different types of rubber bearing - natural rubber bearing (NRB), lead-rubber bearing (LRB), and high-damping rubber bearing (HRB) - were tested up to failure under various combinations of axial and shear forces. The test results are summarized as follows: 1) Offset shear strain greatly affects tensile behavior and failure. 2) Axial stress or strain does not so greatly affect shear behavior and failure. 3) The characteristics of NBR and LRB are almost independent of strain rate, but those of HRB depend greatly on it. 4) Cyclic loading affects large-deformation behavior and failure to some extent. 5) failure limits which include the interaction between axial stress and shear strain were quantitatively evaluated. 6) A lead plug of LRB has no bad influence on failure. These will be very useful for developing an ultimate response prediction technique, which is necessary to establish rational design philosophy of base isolation systems for FBR plants. (author)

  19. Mercury biomagnification in polar bears ( Ursus maritimus)

    Science.gov (United States)

    Horton, T. W.; Blum, J. D.; Xie, Z.; Hren, M.; Chamberlain, C. P.

    2007-12-01

    Mercury biomagnification occurs in a variety of ecosystems resulting in greater potential for toxicological effects in higher-level trophic feeders. However, Hg transport pathways through different foodweb channels are not well known, particularly in high-latitude systems affected by atmospheric Hg deposition associated with snow and ice. Stable carbon and nitrogen isotope ratios and Hg concentrations determined for 26 late 19th and early 20th century polar bear hair specimens collected from cataloged museum collections elucidate relationships between high latitude marine foodweb structure and Hg transport pathways. Nitrogen and carbon isotopic compositions suggest that polar bears derive nutrition from both open water (pelagic) and ice associated (sympagic) foodweb channels. Correlation between Hg concentrations and nitrogen isotope compositions indicate mercury biomagnification occurred in most of the polar bears investigated. Interpretation of stable isotope based foodweb structure in concert with Hg concentrations further suggests that Hg biomagnification occurred to a greater degree in polar bears participating in pelagic foodweb channels.

  20. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding......The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared to...... one or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  1. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  2. Novel nano bearings constructed by physical adsorption

    Science.gov (United States)

    Zhang, Yongbin

    2015-09-01

    The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have different interaction strengths with the lubricating fluid. It leads to different physical adsorption and slip properties of the lubricating fluid at the stationary solid wall respectively in these two subzones. It was found that a significant load-carrying capacity of the bearing can be generated for low lubricating film thicknesses, because of the strong physical adsorption and non-continuum effects of the lubricating film.

  3. Cavitation Peening of Aerospace Bearings Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-value bearings are a critical part of the safety, reliability, cost and performance of modern aircraft. A typical passenger jet will have 100 to 175 high-valve...

  4. Polar bear research in Alaska, spring 1982

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  5. Polar bear research in Alaska, spring 1981

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  6. The polar bear and its protection

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — No census has been made of the polar bear population and indeed the general movements of the animals within their range are poorly known. At present it is not...

  7. Bearings for the HFIR control plates

    International Nuclear Information System (INIS)

    Recent accelerated wear of HFIR bearings seems to be a more advanced stage of the situation encountered in 1967. The latest observations are in agreement with the hypothesis that high-frequency impact loads at a 300 angle on these bearings are the apparent basic cause of their short life. In view of the limited possibilities for change at this stage of HFIR operation, the region of best payoff seems to be an increase in the load-carrying area at some acceptable sacrifice of low rolling friction. On this basis three types of bearings are proposed for test--two of these are journal types and one is a slider type. The next planned shutdown for major parts replacement provides an opportunity to test these modified bearing types in the HFIR under full mechanical operating conditions but without nuclear operation. The program is recommended for consideration and adoption. (U.S.)

  8. Gauge Measures Large Spherical Bearing Surfaces

    Science.gov (United States)

    Davis, George L.

    1992-01-01

    Radius of spherical portion of surface computed from reading of depth gauge. Measuring tool calibrated by applying it to reference spherical surface of known radius. Used onsite, so unnecessary to ship bearings to laboratory for examination by computerized test equipment.

  9. Active magnetic bearings used as exciters for rolling element bearing outer race defect diagnosis.

    Science.gov (United States)

    Xu, Yuanping; Di, Long; Zhou, Jin; Jin, Chaowu; Guo, Qintao

    2016-03-01

    The active health monitoring of rotordynamic systems in the presence of bearing outer race defect is considered in this paper. The shaft is assumed to be supported by conventional mechanical bearings and an active magnetic bearing (AMB) is used in the mid of the shaft location as an exciter to apply electromagnetic force to the system. We investigate a nonlinear bearing-pedestal system model with the outer race defect under the electromagnetic force. The nonlinear differential equations are integrated using the fourth-order Runge-Kutta algorithm. The simulation and experimental results show that the characteristic signal of outer race incipient defect is significantly amplified under the electromagnetic force through the AMBs, which is helpful to improve the diagnosis accuracy of rolling element bearing׳s incipient outer race defect. PMID:26803551

  10. Genetic relationships of extant brown bears (Ursus arctos) and polar bears (Ursus maritimus).

    Science.gov (United States)

    Cronin, Matthew A; MacNeil, Michael D

    2012-01-01

    Polar bears (Ursus maritimus) and brown bears (Ursus arctos) are closely related species for which extensive mitochondrial and nuclear phylogenetic comparisons have been made. We used previously published genotype data for 8 microsatellite DNA loci from 930 brown bears in 19 populations and 473 polar bears in 16 populations to compare the population genetic relationships of extant populations of the species. Genetic distances (Nei standard distance = 1.157), the proportion of private alleles (52% of alleles are not shared by the species), and Bayesian cluster analysis are consistent with morphological and life-history characteristics that distinguish polar bears and brown bears as different species with little or no gene flow among extant populations. PMID:23125409

  11. Pharmacokinetics of Ro 03-8799 in mice bearing melanosarcoma: comparison with tumors without melanin

    International Nuclear Information System (INIS)

    The pharmacokinetics of Ro 03-8799 has been studied in melanic and non-melanic tumor bearing mice after iv administration of 150 mg/kg. The peak concentration in B16 melanosarcoma tumor reached 152 micrograms/g, that is 7.6-fold higher than the plasma concentration at the same time. This concentration is 3-times greater than that obtained in the tumor of mice bearing non-melanic sarcoma (DB16) or Lewis lung carcinoma (3LL). The exposure of B16 tumor (AUC) is respectively 15-times and 11-times higher than the 3LL and the DB16 ones. These experimental data confirm that this 2-nitro-imidazol compound has an important affinity for melanin and suggest that it might be used as a radiosensitizer for the treatment of malignant melanoma

  12. Spectral properties and identification of aerostatic bearings

    Institute of Scientific and Technical Information of China (English)

    Jan Kozánek; Ladislav P(u)st

    2011-01-01

    Modified rotor kit BentlyNevada was used for dynamic characteristics measurements of new developed aerostatic bearings. Mathematical model of these bearings is considered as linear. Model was identified with the help of harmonic force excitation independently from the speed of journal rotation. The stiffness and damping matrices were identified for different air inlet pressures. The calculated spectral properties allow to determine the stability boundary for suitable variation of model parameters.

  13. Flywheel energy storage with superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.; Lynds, Jr., Lahmer; Hull, John R.

    1993-01-01

    A flywheel having superconductor bearings has a lower drag to lift ratio that translates to an improvement of a factor of ten in the rotational decay rate. The lower drag results from the lower dissipation of melt-processed YBCO, improved uniformity of the permanent magnet portion of the bearings, operation in a different range of vacuum pressure from that taught by the art, and greater separation distance from the rotating members of conductive materials.

  14. Partial Lubrification of Full Cylindrical Bearings

    OpenAIRE

    Capriz, Gianfranco; Cimatti, Giovanni

    1981-01-01

    the phenomenon of cavitation in bearings is often studied under the assumption that the pressure and the pressure gradient both vanish along the unknown boundary of the cavitation bubble. However, such conditions (often namend after Swift and Stieber) may be inconsistent with mass conservation. The discrepancy is particularly striking when the case of long bearings is studied within the so called Sommerfeld approximation. Therefore a complete analysis of the Sommerfeld case is carried out her...

  15. Surface layer characterisation of bearing rings

    OpenAIRE

    S.J. Skrzypek; M. Goły

    2007-01-01

    austenite. Theoretical calculation of residual macro-stresses due to volume fraction of transformed austenite in bearing rings and following measurements of residual stresses were carried out as well. The bearing elements were made of 100Cr6 steel and they were smoothed and grinded.Design/methodology/approach: Particular features of diffraction patterns like angle position; shape and intensity are used to characterize phase composition, residual micro and macro-stresses, crystallographic tex...

  16. Design of bearing structures of dwelling - house

    OpenAIRE

    Sodja, Urška

    2007-01-01

    Graduation thesis represents design of bearing structures of dwelling-house including materials and materials´ properties of bearing structures. Self weight, imposed load, snow, and wind are determinated regarding EC1. Static calculation of building is divided to design of timber, reinforced concrete elements and control of resistance of walls. Summary contains earthquake rules for simple masonry buildings. Enclosure contains plans for positions of slaps and reinforces.

  17. Live imaging of the lung.

    Science.gov (United States)

    Looney, Mark R; Bhattacharya, Jahar

    2014-01-01

    Live lung imaging has spanned the discovery of capillaries in the frog lung by Malpighi to the current use of single and multiphoton imaging of intravital and isolated perfused lung preparations incorporating fluorescent molecular probes and transgenic reporter mice. Along the way, much has been learned about the unique microcirculation of the lung, including immune cell migration and the mechanisms by which cells at the alveolar-capillary interface communicate with each other. In this review, we highlight live lung imaging techniques as applied to the role of mitochondria in lung immunity, mechanisms of signal transduction in lung compartments, studies on the composition of alveolar wall liquid, and neutrophil and platelet trafficking in the lung under homeostatic and inflammatory conditions. New applications of live lung imaging and the limitations of current techniques are discussed. PMID:24245941

  18. Rotordynamics and bearing design of turbochargers

    Science.gov (United States)

    Chen, Wen Jeng

    2012-05-01

    Turbochargers have gained significant attention in recent years. They are already widely used in automotive, locomotive, and marine applications with diesel engines. They are also applied in the aerospace application to increase the engine performance now. The turbochargers used in automotive and aerospace industry are very light-weight with operating speeds above 100,000 rpm. The turbochargers used in locomotive and marine applications are relatively heavy in size and power compared to the automotive and aerospace applications, and the maximum continuous operating speeds are around 30,000 rpm depending on the diesel engine power rating. Floating ring bushings, semi-floating dampers, ball bearings, and ball bearings with dampers are commonly used in automotive applications for small turbochargers. However, these bearings may not be appropriate for large turbochargers in locomotive and marine applications. Instead, multi-lobed bearings with and without squeeze film dampers are commonly used in these heavy-duty turbochargers. This paper deals with the rotordynamic characteristics of larger turbochargers in locomotive and marine applications. Various bearing designs are discussed. Bearing design parameters are studied and optimal values are suggested. Test results are also presented to support the analytical simulation.

  19. The aging lung

    Directory of Open Access Journals (Sweden)

    Lowery EM

    2013-11-01

    Full Text Available Erin M Lowery,1 Aleah L Brubaker,2 Erica Kuhlmann,1 Elizabeth J Kovacs31Division of Pulmonary and Critical Care Medicine, Department of Internal Medicine at Loyola University Medical Center, 2Loyola University Stritch School of Medicine, 3Department of Surgery, Loyola University Medical Center, Maywood, IL, USAAbstract: There are many age-associated changes in the respiratory and pulmonary immune system. These changes include decreases in the volume of the thoracic cavity, reduced lung volumes, and alterations in the muscles that aid respiration. Muscle function on a cellular level in the aging population is less efficient. The elderly population has less pulmonary reserve, and cough strength is decreased in the elderly population due to anatomic changes and muscle atrophy. Clearance of particles from the lung through the mucociliary elevator is decreased and associated with ciliary dysfunction. Many complex changes in immunity with aging contribute to increased susceptibility to infections including a less robust immune response from both the innate and adaptive immune systems. Considering all of these age-related changes to the lungs, pulmonary disease has significant consequences for the aging population. Chronic lower respiratory tract disease is the third leading cause of death in people aged 65 years and older. With a large and growing aging population, it is critical to understand how the body changes with age and how this impacts the entire respiratory system. Understanding the aging process in the lung is necessary in order to provide optimal care to our aging population. This review focuses on the nonpathologic aging process in the lung, including structural changes, changes in muscle function, and pulmonary immunologic function, with special consideration of obstructive lung disease in the elderly.Keywords: aging, lung, pulmonary immunology, COPD

  20. Diagnostic Value of Transbronchial Lung Biopsy in Peripheral Lung Cancer

    Directory of Open Access Journals (Sweden)

    Wenhui TANG

    2009-03-01

    Full Text Available Background and objective Lung cancer is the leading cause of cancer-related death worldwide. Because the locations of peripheral lung cancer are special, diagnosis of peripheral lung cancer is difficult. The aim of this study was to evaluate diagnostic value of transbronchial lung biopsy (TBLB in peripheral lung cancer. MethodsTransbronchial lung biopsy (TBLB were performed in 78 cases of peripheral lung cancer which could not be observed by bronchoscope, 42 cases among whom were diagnosed by pathology and cytologic examination. Thirty-six cases of peripheral lung cancer were not able to be diagnosed by TBLB, 22 cases among them were diagnosed by percutaneous lung biopsy (PNLB, and 14 cases being left were diagnosed by surgical operation, lymphadenopathy biopsy, pleura biopsy and sputum cytologic examination successively. Results The positive rate produced by transbronchial lung biopsy, brush biopsy were 53.8% and 8.9% respectively. The total positive rate was 57.7%. The positive rate produced by TBLB was higher than that of brush biopsy (P <0.01. Along with tumor's diameter enlarge, the positive rate of diagnosis was higher. The positive rate of right lung was higher than that of left lung. The positive rate of inferior lung was higher than that of upper lung. The lesions near the inner belt and hilus pulmonis, had the higher positive rate. Complicatin frequency in PNLB was much higher than that in TBLB. Conclusion Transbronchial lung biopsy is an important method in diagnosingof peripheral lung cancer. Combination of TBLB can increase the diagnostic positive rate of peripheral lung cancer.

  1. Inhibitions of Several Antineoplastic Drugs on Serum Sialic Acid Levels in Mice Bearing Tumors

    OpenAIRE

    Lu, Da-Yong; Xu, Jing; Lu, Ting-Ren; Wu, Hong-Ying; Xu, Bin

    2012-01-01

    Six murine tumors, including ascetic tumors HepA, EC, P388 leukemia, S180 and solid tumor S180, and Lewis lung carcinoma, were employed in this work. The free sialic acid concentrations in both blood and ascites were measured in tumor-bearing mice. The results showed that the content of sialic acids in blood was increased in tumor growth and certain tumor types. Higher sialic acid content was observed in ascites than that present in blood. The influence of antineoplastic agents (vincristine, ...

  2. Design, synthesis and antiproliferative activities of diaryl urea derivatives bearing N-acylhydrazone moiety

    Institute of Scientific and Technical Information of China (English)

    Bei Zhang; Yan Fang Zhao; Xin Zhai; Wei Jie Fan; Jun Ling Ren; Chun Fu Wu; Ping Gong

    2012-01-01

    A new series of diaryl urea derivatives bearing N-acylhydrazone moiety were designed and synthesized.All the target compounds were evaluated for their antiproliferative activities against human leukemia cell line (HL-60),human lung adenocarcinoma epithelial cell hne (A549) and human breast cancer cell line (MDA-MB-231) in vitro by standard MTT assay.The pharmacological results indicated that some compounds exhibited promising antitumor activities.Compound lj showed the most potent antiproliferative activity against the tested three cell lines with IC50 values of 0.13 μmol/L,0.7 μ mol/L and 0.5 μmol/L,respectively.

  3. Use of animal studies for assessing intakes of inhaled actinide-bearing dusts

    International Nuclear Information System (INIS)

    This paper reviews the methodology used in the execution and interpretation of animal studies (mostly conducted at NRPB) designed to provide guidance on limits of intake and the effectiveness of chest monitoring for persons exposed to various uranium, plutonium, americium, and thorium bearing dusts. The lung retention and transportability characteristics of the actinides in humans have been predicted by combining the absorption rates into blood calculated from the animal studies with particle transport rates from the alveolar region of the human lung. This approach is compatible with the application of the new ICRP respiratory tract model. The results of the animal experiments demonstrate the diversity of the absorption rates for the different chemical forms of the actinides and their disparity from the default values proposed by ICRP for Type F, M, and S compounds in the absence of specific data. The predicted lung retention kinetics of the actinides in humans provide the basis for assessing the validity of chest monitoring; for this purpose the most recent ICRP values for doses per unit intake and deposition in the alveolar region of the lungs have been taken into account. The results show that for some dusts, the data can be interpreted with confidence, while for others the method is impracticable or has considerable uncertainty. Overall, the results support the ICRP recommendation that material specific information is to be preferred for setting limits on intake and interpreting monitoring data. The paper concludes with suggestions for further work. (author). 44 refs., 4 figs., 6 tabs

  4. Recent lung imaging studies

    International Nuclear Information System (INIS)

    Radionuclide lung imaging procedures have been available for 11 years but only the perfusion examination has been used extensively and mainly for the diagnosis of pulmonary embolism (P.E.). Its ability to reveal localized ischemia makes it a valuable test of regional lung function as well as a useful diagnostic aid in P.E. Although it had been recognized for several years that chronic obstructive pulmonary disease (COPD) can cause lung perfusion defects which may simulate pulmonary embolism, relatively little use has been made of either the radioxenon or the radioaerosol inhalation lung imaging procedures until the last few years as a means of distinguishing P.E. from COPD. In this review emphasis is placed on our recent experience with both of these inhalation procedures in comparison with pulmonary function tests and roentgenography for the early detection of COPD in population studies. Equal emphasis is given to simultaneous aerosol ventilation-perfusion (V/P) imaging for a functional diagnosis of P.E. Two new developments in regional lung diffusion imaging, performed after the inhalation of radioactive gases and/or rapidly absorbed radioaerosols are described. The experimental basis for their potential clinical application in pulmonary embolism detection is presented

  5. Lung cancer screening: Update

    International Nuclear Information System (INIS)

    Lung cancer is the leading cause of cancer deaths worldwide as well as in Korea. A recent National Lung Screening Trial in U.S. revealed that low-dose CT (LDCT) screening reduced lung cancer specific mortality by 20% in high risk individuals as compared to chest radiograph screening. Based on this evidence, several expert societies in U.S. and Korean multisociety collaborative committee developed guidelines for recommendation of lung cancer screening using annual LDCT in high risk populations. In most of the societies high risk groups are defined as persons aged 55 to 74 years, who are current smokers with history of smoking of more than 30 packs per year or ex-smokers, who quit smoking up to 15 or more years ago. The benefits of LDCT screening are modestly higher than the harms in high risk individuals. The harms included a high rate of false-positive findings, over-diagnosis and radiation-related deaths. Invasive diagnostic procedure due to false positive findings may lead to complications. LDCT should be performed in qualified hospitals and interpreted by expert radiologists. Recently, the American College of Radiology released the current version of Lung cancer CT screening Reporting and Data Systems. Education and actions to stop smoking must be offered to current smokers

  6. Lung cancer screening: Update

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyea Young [Dept. of Radiology, Center for Lung Cancer, National Cancer Center, Goyang (Korea, Republic of)

    2015-09-15

    Lung cancer is the leading cause of cancer deaths worldwide as well as in Korea. A recent National Lung Screening Trial in U.S. revealed that low-dose CT (LDCT) screening reduced lung cancer specific mortality by 20% in high risk individuals as compared to chest radiograph screening. Based on this evidence, several expert societies in U.S. and Korean multisociety collaborative committee developed guidelines for recommendation of lung cancer screening using annual LDCT in high risk populations. In most of the societies high risk groups are defined as persons aged 55 to 74 years, who are current smokers with history of smoking of more than 30 packs per year or ex-smokers, who quit smoking up to 15 or more years ago. The benefits of LDCT screening are modestly higher than the harms in high risk individuals. The harms included a high rate of false-positive findings, over-diagnosis and radiation-related deaths. Invasive diagnostic procedure due to false positive findings may lead to complications. LDCT should be performed in qualified hospitals and interpreted by expert radiologists. Recently, the American College of Radiology released the current version of Lung cancer CT screening Reporting and Data Systems. Education and actions to stop smoking must be offered to current smokers.

  7. Inhalational Lung Disease

    Directory of Open Access Journals (Sweden)

    S Kowsarian

    2010-01-01

    Full Text Available Inhalational lung diseases are among the most important occupational diseases. Pneumoconiosis refers to a group of lung diseases result from inhalation of usually inorganic dusts such as silicon dioxide, asbestos, coal, etc., and their deposition in the lungs. The resultant pulmonary disorders depend on the susceptibility of lungs; size, concentration, solubility and fibrogenic properties of the inhaled particles; and duration of exposure. Radiographic manifestations of pneumoconiosis become apparent several years after exposure to the particles. However, for certain types of dusts, e.g., silicone dioxide crystal and beryllium, heavy exposure within a short period can cause an acute disease. Pulmonary involvement in asbestosis is usually in the lower lobes. On the contrary, in silicosis and coal worker pneumoconiosis, the upper lobes are involved predominantly. For imaging evaluation of pneumoconiosis, high-resolution computed tomography (CT is superior to conventional chest x-ray. Magnetic resonance imaging (MRI and positron emission tomography (PET scan are helpful in those with suspected tumoral lesions. In this essay, we reviewed the imaging aspects of inhalational lung disease.

  8. Rb and p53 gene deletions in lung adenocarcinomas from irradiated and control mice

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y.; Woloschak, G.E. [Argonne National Lab., IL (United States). Center for Mechanistic Biology and Biotechnology

    1997-08-01

    This study was conducted on mouse lung adenocarcinoma tissues that were formalin-treated and paraffin-embedded 25 years ago to investigate the large gene deletions of mRb and p53 in B6CF{sub 1} male mice. A total of 80 lung tissue samples from irradiated mice and 40 lung samples from nonirradiated controls were randomly selected and examined in the mRb portion of this study. The results showed a significant (P < 0.05) higher percentage of mRb deletions in lung adenocarcinomas from mice exposed to 60 once-weekly {gamma}-ray doses than those from mice receiving 24 once-weekly {gamma}-ray doses at low doses and low dose rates; however, the percentage was not significantly different (P > 0.05) from that for spontaneous lung adenocarcinomas or lung adenocarcinomas from mice exposed to single-dose {gamma} irradiation at a similar total dose. mRb fragments 3 (71%) and 5 (67%), the parts of the gene that encoded the pocket binding region of Rb protein to adenovirus E1A and SV40 T-antigen, were the most frequently deleted fragments. p53 gene deletion analysis was carried out on normal lungs and lung adenocarcinomas that were initially found to bear mRb deletions. Exons 1,4,5,6, and 9 were chosen to be analyzed.

  9. Case-control study of lung cancer among workers at a uranium processing plant

    International Nuclear Information System (INIS)

    The purpose of this case-control study was to investigate the relationship between exposure to radiation resulting from the inhalation of uranium dust and the dust of uranium-bearing compounds and death due to lung cancer. Cases and controls were chosen from a cohort of white male workers employed at one uranium processing plant during World War II. The 330 cases consisted of all lung cancer deaths occurring in the cohort between 1943 and 1973. Level of exposure to radiation and other potential workplace carcinogens was determined for each worker using process manuals, industrial hygiene reports, air monitoring data and individual work histories. Smoking status and information regarding medical variables was determined from employee medical records. Cumulative radiation lung dose among study population members ranged from 0 to 75 rads. Data were analyzed using Mantel-Haenszel stratified analysis and logistic regression. Relative risk was found to increase with increasing level of lung dose exposure even after controlling for age, smoking status and other workplace exposures, but only for those who were over the age of 44 when first exposed. A statistically significant excess in risk was found for men in this hire age group with a cumulative lung dose of 20 rads or more. The risk associated with the overall work environment was also investigated using a summary measure of total workplace exposure called chemical rank. A similar relationship existed between chemical rank and lung cancer to that found for cumulative lung dose and lung cancer

  10. Depletion of tumor associated macrophages slows the growth of chemically-induced mouse lung adenocarcinomas

    Directory of Open Access Journals (Sweden)

    Jason M. Fritz

    2014-11-01

    Full Text Available Chronic inflammation is a risk factor for lung cancer, and low dose aspirin intake reduces lung cancer risk. However, the roles that specific inflammatory cells and their products play in lung carcinogenesis have yet to be fully elucidated. In mice, alveolar macrophage numbers increase as lung tumors progress, and pulmonary macrophage programming changes within 2 weeks of carcinogen exposure. To examine how macrophages specifically affect lung tumor progression, they were depleted in mice bearing urethane-induced lung tumors using clodronate-encapsulated liposomes. Alveolar macrophage populations decreased to ≤ 50% of control levels after 4-6 weeks of liposomal clodronate treatment. Tumor burden decreased by 50% compared to vehicle treated mice, and tumor cell proliferation, as measured by Ki67 staining, was also attenuated. Pulmonary fluid levels of IGF-I, CXCL1, IL-6 and CCL2 diminished with clodronate liposome treatment. Tumor associated macrophages expressed markers of both M1 and M2 programming in vehicle and clodronate liposome treated mice. Mice lacking CCR2 (the receptor for macrophage chemotactic factor CCL2 had comparable numbers of alveolar macrophages and showed no difference in tumor growth rates when compared to similarly treated wild-type mice suggesting that while CCL2 may recruit macrophages to lung tumor microenvironments, redundant pathways can compensate when CCL2/CCR2 signaling is inactivated. Depletion of pulmonary macrophages rather than inhibition of their recruitment may be an advantageous strategy for attenuating lung cancer progression.

  11. What to Expect During a Lung Transplant

    Science.gov (United States)

    ... your airway and its blood vessels to your heart. Lung Transplant The illustration shows the process of a lung ... to 12 hours. Some people may need a heart–lung transplant. A heart–lung transplant is surgery in which ...

  12. Rolling Bearing Life Prediction, Theory, and Application

    Science.gov (United States)

    Zaretsky, Erwin V.

    2013-01-01

    A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg- Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application.

  13. A circumpolar monitoring framework for polar bears

    Science.gov (United States)

    Vongraven, Dag; Aars, Jon; Amstrup, S.; Atkinson, Stephen N.; Belikov, Stanislav; Born, Erik W.; DeBruyn, T.D.; Derocher, Andrew E.; Durner, George M.; Gill, Mike; Lunn, Nicholas J.; Obbard, Martyn E.; Omelak, Jack; Ovsyanikov, Nikita; Peacock, Elizabeth; Richardson, E.E.; Sahanatien, Vicki; Stirling, Ian; Wiig, Øystein

    2012-01-01

    Polar bears (Ursus maritimus) occupy remote regions that are characterized by harsh weather and limited access. Polar bear populations can only persist where temporal and spatial availability of sea ice provides adequate access to their marine mammal prey. Observed declines in sea ice availability will continue as long as greenhouse gas concentrations rise. At the same time, human intrusion and pollution levels in the Arctic are expected to increase. A circumpolar understanding of the cumulative impacts of current and future stressors is lacking, long-term trends are known from only a few subpopulations, and there is no globally coordinated effort to monitor effects of stressors. Here, we describe a framework for an integrated circumpolar monitoring plan to detect ongoing patterns, predict future trends, and identify the most vulnerable polar bear subpopulations. We recommend strategies for monitoring subpopulation abundance and trends, reproduction, survival, ecosystem change, human-caused mortality, human–bear conflict, prey availability, health, stature, distribution, behavioral change, and the effects that monitoring itself may have on polar bears. We assign monitoring intensity for each subpopulation through adaptive assessment of the quality of existing baseline data and research accessibility. A global perspective is achieved by recommending high intensity monitoring for at least one subpopulation in each of four major polar bear ecoregions. Collection of data on harvest, where it occurs, and remote sensing of habitat, should occur with the same intensity for all subpopulations. We outline how local traditional knowledge may most effectively be combined with the best scientific methods to provide comparable and complementary lines of evidence. We also outline how previously collected intensive monitoring data may be sub-sampled to guide future sampling frequencies and develop indirect estimates or indices of subpopulation status. Adoption of this framework

  14. Longitudinal Analysis of the Lung Microbiome in Lung Transplantation

    OpenAIRE

    Borewicz, Klaudyna; Pragman, Alexa A.; Kim, Hyeun Bum; Hertz, Marshall; Wendt, Christine; Richard E Isaacson

    2012-01-01

    Lung transplant recipients experience poor long-term survival, largely due to chronic rejection. The pathogenesis of chronic rejection is incompletely understood, but bacterial colonization of the lung is associated with chronic rejection, while antibiotic use slows its progression. The lung harbors a bacterial community, termed the microbiome, which is present both in health and disease. We hypothesize that the lung microbiome will change following transplantation, and these changes may corr...

  15. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and...

  16. Noise reduction of rotating machinery by viscoelastic bearing supports

    NARCIS (Netherlands)

    Tillema, Hetzer Gido

    2003-01-01

    The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement

  17. Lung mass, right upper lung - chest x-ray (image)

    Science.gov (United States)

    This picture is a chest x-ray of a person with a lung mass. This is a front view, where the lungs are the two dark areas and ... visible in the middle of the chest. The x-ray shows a mass in the right upper lung, ...

  18. Lung mass, right upper lung - chest x-ray (image)

    Science.gov (United States)

    ... chest x-ray of a person with a lung mass. This is a front view, where the lungs are the two dark areas and the heart ... ray shows a mass in the right upper lung, indicated with the arrow (seen on the left ...

  19. Lung Cancer Stem Cells

    Directory of Open Access Journals (Sweden)

    Sharon R. Pine

    2008-01-01

    Full Text Available Lung cancer remains a major cause of cancer-related lethality because of high incidence and recurrence in spite of significant advances in staging and therapies. Recent data indicates that stem cells situated throughout the airways may initiate cancer formation. These putative stem cells maintain protumorigenic characteristics including high proliferative capacity, multipotent differentiation, drug resistance and long lifespan relative to other cells. Stem cell signaling and differentiation pathways are maintained within distinct cancer types, and destabilization of this machinery may participate in maintenance of cancer stem cells. Characterization of lung cancer stem cells is an area of active research and is critical for developing novel therapies. This review summarizes the current knowledge on stem cell signaling pathways and cell markers used to identify the lung cancer stem cells.

  20. Lung pair phantom

    Science.gov (United States)

    Olsen, Peter C.; Gordon, N. Ross; Simmons, Kevin L.

    1993-01-01

    The present invention is a material and method of making the material that exhibits improved radiation attenuation simulation of real lungs, i.e., an "authentic lung tissue" or ALT phantom. Specifically, the ALT phantom is a two-part polyurethane medium density foam mixed with calcium carbonate, potassium carbonate if needed for K-40 background, lanthanum nitrate, acetone, and a nitrate or chloride form of a radionuclide. This formulation is found to closely match chemical composition and linear attenuation of real lungs. The ALT phantom material is made according to established procedures but without adding foaming agents or preparing thixotropic concentrate and with a modification for ensuring uniformity of density of the ALT phantom that is necessary for accurate simulation. The modification is that the polyurethane chemicals are mixed at a low temperature prior to pouring the polyurethane mixture into the mold.

  1. Lung pair phantom

    International Nuclear Information System (INIS)

    The present invention is a material and method of making the material that exhibits improved radiation attenuation simulation of real lungs, i.e., an ''authentic lung tissue'' or ALT phantom. Specifically, the ALT phantom is a two-part polyurethane medium density foam mixed with calcium carbonate, potassium carbonate if needed for K-40 background, lanthanum nitrate, acetone, and a nitrate or chloride form of a radionuclide. This formulation is found to closely match chemical composition and linear attenuation of real lungs. The ALT phantom material is made according to established procedures but without adding foaming agents or preparing thixotropic concentrate and with a modification for ensuring uniformity of density of the ALT phantom that is necessary for accurate simulation. The modification is that the polyurethane chemicals are mixed at a low temperature prior to pouring the polyurethane mixture into the mold

  2. Insulin and the Lung

    DEFF Research Database (Denmark)

    Singh, Suchita; Prakash, Y S; Linneberg, Allan;

    2013-01-01

    , molecular understanding is necessary. Insulin resistance is a strong, independent risk factor for asthma development, but it is unknown whether a direct effect of insulin on the lung is involved. This review summarizes current knowledge regarding the effect of insulin on cellular components of the lung......Obesity, metabolic syndrome, and asthma are all rapidly increasing globally. Substantial emerging evidence suggests that these three conditions are epidemiologically and mechanistically linked. Since the link between obesity and asthma appears to extend beyond mechanical pulmonary disadvantage...... and highlights the molecular consequences of insulin-related metabolic signaling cascades that could adversely affect lung structure and function. Examples include airway smooth muscle proliferation and contractility and regulatory signaling networks that are associated with asthma. These aspects of insulin...

  3. National Lung Screening Trial (NLST)

    Science.gov (United States)

    The National Lung Screening Trial (NLST), a research study sponsored by the National Cancer Institute that used low-dose helical CT scans or chest X-ray to screen men and women at risk for lung cancer.

  4. What Are Lung Carcinoid Tumors?

    Science.gov (United States)

    ... Research Get Involved Find Local ACS Learn About Cancer » Lung Carcinoid Tumor » Detailed Guide » What are lung carcinoid tumors? Share this Page Close Push escape to close share window. Print ...

  5. Lung Cancer Rates by State

    Science.gov (United States)

    ... HPV-Associated Ovarian Prostate Skin Uterine Cancer Home Lung Cancer Rates by State Language: English Español (Spanish) Recommend ... incidence data are currently available. Rates of Getting Lung Cancer by State The number of people who get ...

  6. The ALCHEMIST Lung Cancer Trial

    Science.gov (United States)

    A collection of material about the ALCHEMIST lung cancer trial that will examine tumor tissue from patients with early-stage, completely resected lung cancer for gene mutations in the EGFR and ALK genes, and a

  7. Lung-MAP Clinical Trial

    Science.gov (United States)

    A collection of material about the Lung-MAP study, which will examine treatment outcomes for patients with squamous cell lung cancer assigned to different targeted drugs based on the results of genomic tumor profiling.

  8. What Are Lung Function Tests?

    Science.gov (United States)

    ... Risks Links Related Topics Asthma COPD How the Lungs Work Idiopathic Pulmonary Fibrosis Sarcoidosis Send a link to ... mun-ary) function tests, measure how well your lungs work. These tests are used to look for the ...

  9. Lung commitment in Tuberous Sclerosis

    International Nuclear Information System (INIS)

    Tuberous sclerosis is a rare hereditary anomaly characterized by hamartomas in many parts of the body. Lung involvement is found in only one of 100 cases. In this case report we present a patient with lung involvement in tuberous sclerosis

  10. Severity estimation of cracked shaft vibrations within fluid film bearings

    Science.gov (United States)

    Prabhu, B. S.; Sekhar, A. S.

    1995-07-01

    The equations of motion, with four degrees of freedom, taking into consideration the flexibility, damping and cross coupling of the fluid film bearings are derived for a cracked Jeffcott rotor supported on fluid film bearings. Dimensionless equations are developed for dynamic radial load, dynamic pressure developed in the fluid film bearings and coefficient of dissipation considering the journal vibrations in two harmonics; bearing fluid film stiffness and damping coefficients. These are applied to a cracked Jeffcott rotor supported on different types of bearings, i.e., cylindrical journal bearings, offset cylindrical bearings, tilting pad journal bearings and three-lobe bearings. Based on the allowable dynamic pressure developed in the fluid bearings, the severity of cracked shaft and allowable crack depths are estimated in this study. Measurement of dynamic pressure and dissipation for monitoring the crack growth is suggested. However, 2x vibration is the best indicator of cracks in the shafts.

  11. Bearing assemblies, apparatuses, and motor assemblies using the same

    Energy Technology Data Exchange (ETDEWEB)

    Sexton, Timothy N.; Cooley, Craig H.; Knuteson, Cody W.

    2015-12-29

    Various embodiments of the invention relate to bearing assemblies, apparatuses and motor assemblies that include geometric features configured to impart a selected amount of heat transfer and/or hydrodynamic film formation. In an embodiment, a bearing assembly may include a plurality of superhard bearing pads distributed circumferentially about an axis. At least some of the plurality of superhard bearing pads may include a plurality of sub-superhard bearing elements defining a bearing surface. At least some of the plurality of sub-superhard bearing elements may be spaced from one another by one or more voids to impart a selected amount of heat transfer and hydrodynamic film formation thereon during operation. The bearing assembly may also include a support ring that carries the plurality of superhard bearing pads. In addition, at least a portion of the sub-superhard bearing elements may extend beyond the support ring.

  12. Rotor-Bearing System Stability Performance Comparing Hybrid versus Conventional Bearings

    Directory of Open Access Journals (Sweden)

    Gomez-Mancilla Julio

    2005-01-01

    Full Text Available New closed-form expressions for calculating the linear stability thresholds for rigid and flexible Jeffcott systems and the imbalance response for a rotor supported on a hybrid bearing are presented. For typical bearings characteristics, expressions yield stability thresholds practically equal to those reported by Lund (1966. The hybrid bearing design has a single injection port whose location is so chosen to stabilize the bearing performance and to reduce the steady equilibrium attitude angle. Rotordynamics coefficients graphs for conventional and pressurized bearings, as functions of bearing equilibrium eccentricity and/or Sommerfeld number, are presented. Using the rotordynamics coefficients into the expressions for the corresponding velocity thresholds and the imbalance response, the system stability and vibration performances are estimated and analyzed. When comparing the Jeffcott flexible shaft supported on two journal bearings of the conventional type with the hybrid type, the results show a clear superiority of the pressurized design as far as stability behavior is concerned. Specifically for cases of flexible shafts with similar characteristics to those used in industry, the analysis shows that this design yields velocity thresholds 25%–40% higher compared to the conventional circular ones. Also this bearing displays nonlinear feeding pressure behavior, and it is capable of reducing the synchronous vibration amplitude in most speed ranges, except around the critical speed; moreover, for certain Jeffcott configurations the amplitude reduction can be substantial.

  13. Bronchoscopic lung volume reduction

    Directory of Open Access Journals (Sweden)

    M. I. Polkey

    2006-12-01

    Full Text Available Surgical lung volume reduction can improve exercise performance and forced expiratory volume in one second in patients with emphysema. However, the procedure is associated with a 5% mortality rate and a nonresponse rate of 25%. Accordingly, interest has focused on alternative ways of reducing lung volume. Two principle approaches are used: collapse of the diseased area using blockers placed endobronchially and the creation of extrapulmonary pathways. Preliminary data from the former approach suggest that it can be successful and that the magnitude of success is related to reduction in dynamic hyperinflation.

  14. Lung Ablation: Whats New?

    Science.gov (United States)

    Xiong, Lillian; Dupuy, Damian E

    2016-07-01

    Lung cancer had an estimated incidence of 221,200 in 2015, making up 13% of all cancer diagnoses. Tumor ablation is an important treatment option for nonsurgical lung cancer and pulmonary metastatic patients. Radiofrequency ablation has been used for over a decade with newer modalities, microwave ablation, cryoablation, and irreversible electroporation presenting as additional and possibly improved treatment options for patients. This minimally invasive therapy is best for small primary lesions or favorably located metastatic tumors. These technologies can offer palliation and sometimes cure of thoracic malignancies. This article discusses the current available technologies and techniques available for tumor ablation. PMID:27050331

  15. Lung donor selection criteria

    OpenAIRE

    Chaney, John; Suzuki, Yoshikazu; Cantu, Edward; van Berkel, Victor

    2014-01-01

    The criteria that define acceptable physiologic and social parameters for lung donation have remained constant since their empiric determination in the 1980s. These criteria include a donor age between 25-40, a arterial partial pressure of oxygen (PaO2)/FiO2 ratio greater than 350, no smoking history, a clear chest X-ray, clean bronchoscopy, and a minimal ischemic time. Due to the paucity of organ donors, and the increasing number of patients requiring lung transplant, finding a donor that me...

  16. Lung histeresis: a morphological view

    OpenAIRE

    Escolar Castellón, J.de D.; Escolar castellón, A.

    2004-01-01

    The lung is an imperfect elastic body and for this reason dissipates energy. The energy applied to the lung in inspiration is not recovered in expiration. The property of dissipating energy receives the name of hysteresis. Lung hysteresis can be quantified because it applies to the area between the ascending and descending portions of the pressure-volume curve. Lung hysteresis comprises parenchymal hysteresis and bronchial hysteresis. Each point on the pressure...

  17. Brain injury requires lung protection

    OpenAIRE

    Lopez-Aguilar, Josefina; Blanch, Lluis

    2015-01-01

    The paper entitled “The high-mobility group protein B1-Receptor for advanced glycation endproducts (HMGB1-RAGE) axis mediates traumatic brain injury (TBI)-induced pulmonary dysfunction in lung transplantation” published recently in Science Translational Medicine links lung failure after transplantation with alterations in the axis HMGB1-RAGE after TBI, opening a new field for exploring indicators for the early detection of patients at risk of developing acute lung injury (ALI). The lung is on...

  18. Assessment of Peripheral Lung Mechanics

    OpenAIRE

    Bates, Jason H. T.; Suki, Béla

    2008-01-01

    The mechanical properties of the lung periphery are major determinants of overall lung function, and can change dramatically in disease. In this review we examine the various experimental techniques that have provided data pertaining to the mechanical properties of the lung periphery, together with the mathematical models that have been used to interpret these data. These models seek to make a clear distinction between the central and peripheral compartments of the lung by encapsulating funct...

  19. Smoking and interstitial lung diseases

    OpenAIRE

    Margaritopoulos, George A.; Eirini Vasarmidi; Joseph Jacob; Wells, Athol U; Katerina M. Antoniou

    2015-01-01

    For many years has been well known that smoking could cause lung damage. Chronic obstructive pulmonary disease and lung cancer have been the two most common smoking-related lung diseases. In the recent years, attention has also focused on the role of smoking in the development of interstitial lung diseases (ILDs). Indeed, there are three diseases, namely respiratory bronchiolitis-associated ILD, desquamative interstitial pneumonia and pulmonary Langerhans cell histiocytosis, that are currentl...

  20. Nanoparticle delivery in infant lungs

    OpenAIRE

    Semmler-Behnke, Manuela; Kreyling, Wolfgang G; Schulz, Holger; Takenaka, Shinji; James P Butler; Henry, Frank S.; Tsuda, Akira

    2012-01-01

    The lung surface is an ideal pathway to the bloodstream for nanoparticle-based drug delivery. Thus far, research has focused on the lungs of adults, and little is known about nanoparticle behavior in the immature lungs of infants. Here, using nonlinear dynamical systems analysis and in vivo experimentation in developing animals, we show that nanoparticle deposition in postnatally developing lungs peaks at the end of bulk alveolation. This finding suggests a unique paradigm, consistent with th...

  1. 77 FR 59639 - Bear Lake National Wildlife Refuge, Bear Lake County, ID and Oxford Slough Waterfowl Production...

    Science.gov (United States)

    2012-09-28

    ... notice in the Federal Register (75 FR 35829; June 23, 2010). Bear Lake National Wildlife Refuge Bear Lake... Fish and Wildlife Service Bear Lake National Wildlife Refuge, Bear Lake County, ID and Oxford Slough... our draft comprehensive conservation plan and environmental assessment (Draft CCP/EA) for the...

  2. Fatigue Life Analysis of Rolling Bearings Based on Quasistatic Modeling

    OpenAIRE

    Wei Guo; Hongrui Cao; Zhengjia He; Laihao Yang

    2015-01-01

    Rolling bearings are widely used in aeroengine, machine tool spindles, locomotive wheelset, and so forth. Rolling bearings are usually the weakest components that influence the remaining life of the whole machine. In this paper, a fatigue life prediction method is proposed based on quasistatic modeling of rolling bearings. With consideration of radial centrifugal expansion and thermal deformations on the geometric displacement in the bearings, the Jones’ bearing model is updated, which can pr...

  3. An Advanced Microturbine System with Water-Lubricated Bearings

    OpenAIRE

    Susumu Nakano; Tadaharu Kishibe; Tomoaki Inoue; Hiroyuki Shiraiwa

    2009-01-01

    A prototype of the next-generation, high-performance microturbine system was developed for laboratory evaluation. Its unique feature is its utilization of water. Water is the lubricant for the bearings in this first reported application of water-lubricated bearings in gas turbines. Bearing losses and limitations under usage conditions were found from component tests done on the bearings and load tests done on the prototype microturbine. The rotor system using the water-lubricated bearings ach...

  4. Noise reduction of rotating machinery by viscoelastic bearing supports

    OpenAIRE

    Tillema, Hetzer Gido

    2003-01-01

    The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement can be isolated and damped in such a way that the radiated sound power is reduced. The ultimate goal of this research was to develop a design strategy for viscoelastic bearing supports resulting i...

  5. Method for changing removable bearing for a wind turbine generator

    Energy Technology Data Exchange (ETDEWEB)

    Bagepalli, Bharat Sampathkumaran (Niskayuna, NY); Jansen, Patrick Lee (Scotia, NY), Gadre; Aniruddha Dattatraya (Rexford, NY)

    2008-04-22

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  6. Assessing bear-human conflicts in the Yukon Territory

    OpenAIRE

    Lukie, Raechel Dawn

    2010-01-01

    Managing conflicts between bears and humans is vital for human safety and for the conservation of bears. This study investigated black bear (Ursus americanus) and grizzly bear (Ursus arctos) interactions with humans in 18 major communities of the Yukon Territory. I used an information theoretic approach to generate predictive models of the relative potential of bear-human interaction for the 9 conservation officer management regions in the Yukon Territory. I independently modeled interactions...

  7. Vascular injuries after bear attacks: Incidence, surgical challenges and outcome

    OpenAIRE

    Wani Mohd; Ahangar Abdul; Lone Gh; Lone Reyaz; Ashraf Hakeem; Dar Abdul; Bhat M; Singh Shyam; Bijli Akram; Irshad Ifat

    2011-01-01

    Background : Bear mauling is rarely reported in medical literature due to its rare occurrence. Present study was undertaken to describe the pattern and management of bear maul vascular injuries in Kashmir. Methods : Study of patients with bear maul vascular injury from 1st Jan 2004 to 31st Dec. 2008. Fifteen patients with bear maul vascular injury were studied. All patients of bear maul without vascular injury were excluded from the study. Results : Most of the patients were treated by revers...

  8. Aerial strip surveys of polar bears in the Barents Sea

    OpenAIRE

    Wiig, Øystein; Bakken, Vidar

    1990-01-01

    Aerial strip surveys of polar bears in the Barents Sea were performed by helicopter in winter 1987. The number of bears within 100 m on each side of the helicopter was counted. A total of 263.6 km2 was surveyed and 21 bears were counted. Most of the bears were found in the southern part of the area, which indicates that the southwestern ice edge area in the Barents Sea is a very important winter habitat for polar bears.

  9. ES and H-compatible lubrication for duplex bearings

    Energy Technology Data Exchange (ETDEWEB)

    Steinhoff, R.G.

    1997-10-01

    Two ES and H-compatible lubricants (environment, safety, and health) for duplex bearing applications and one hybrid material duplex bearing were evaluated and compared against duplex bearings with trichlorotrifluoroethane (Freon) deposition of low molecular weight polytetrafluoroethylene (PTFE) bearing lubricant extracted from Vydax{trademark}. Vydax is a product manufactured by DuPont consisting of various molecular weights of PTFE suspended in trichlorotrifluoroethane (Freon), which is an ozone-depleting solvent. Vydax has been used as a bearing lubricant in strong link mechanisms since 1974. Hybrid duplex bearings with silicon nitride balls and molded glass-nylon-Teflon retainers, duplex bearings lubricated with sputtered MoS{sub 2} on races and retainers, and duplex bearings lubricated with electrophoretic deposited MoS{sub 2} were evaluated. Bearings with electrophoretic deposited MoS{sub 2} performed as well as bearings with Freon deposition of PTFE from Freon-based Vydax. Hybrid bearings with silicon nitride balls performed worse than bearings lubricated with Vydax, but their performance would still be acceptable for most applications. Bearings lubricated with sputtered MoS{sub 2} on the races and retainers had varying amounts of film on the bearings. This affected the performance of the bearings. Bearings with a uniform coating performed to acceptable levels, but bearings with no visible MoS{sub 2} on the races and retainers did not perform as well as bearings with the other coatings. Unless process controls are incorporated in the sputtering process or the bearings are screened, they do not appear to be acceptable for duplex bearing applications.

  10. Drugs Approved for Lung Cancer

    Science.gov (United States)

    ... Ask about Your Treatment Research Drugs Approved for Lung Cancer This page lists cancer drugs approved by the Food and Drug Administration (FDA) for lung cancer. The list includes generic and brand names. This page also lists common drug combinations used in lung ...

  11. Multiple myeloma with lung plasmacytoma

    OpenAIRE

    Rajendra Prasad; Sanjay Kumar Verma; Rakhi Sodhi

    2011-01-01

    Malignant myeloma (MM) is a clonal proliferation of plasma cells with multiple osteolytic lesions. Extramedullary dissemination of multiple myeloma in lung is relatively uncommon. Hereby, we present a case of multiple myeloma with lung plasmacytoma of lung in a 45-years-old, non-smoker, female.

  12. Conceptual Design and Feasibility of Foil Bearings for Rotorcraft Engines: Hot Core Bearings

    Science.gov (United States)

    Howard, Samuel A.

    2007-01-01

    Recent developments in gas foil bearing technology have led to numerous advanced high-speed rotating system concepts, many of which have become either commercial products or experimental test articles. Examples include oil-free microturbines, motors, generators and turbochargers. The driving forces for integrating gas foil bearings into these high-speed systems are the benefits promised by removing the oil lubrication system. Elimination of the oil system leads to reduced emissions, increased reliability, and decreased maintenance costs. Another benefit is reduced power plant weight. For rotorcraft applications, this would be a major advantage, as every pound removed from the propulsion system results in a payload benefit.. Implementing foil gas bearings throughout a rotorcraft gas turbine engine is an important long-term goal that requires overcoming numerous technological hurdles. Adequate thrust bearing load capacity and potentially large gearbox applied radial loads are among them. However, by replacing the turbine end, or hot section, rolling element bearing with a gas foil bearing many of the above benefits can be realized. To this end, engine manufacturers are beginning to explore the possibilities of hot section gas foil bearings in propulsion engines. This overview presents a logical follow-on activity by analyzing a conceptual rotorcraft engine to determine the feasibility of a foil bearing supported core. Using a combination of rotordynamic analyses and a load capacity model, it is shown to be reasonable to consider a gas foil bearing core section. In addition, system level foil bearing testing capabilities at NASA Glenn Research Center are presented along with analysis work being conducted under NRA Cooperative Agreements.

  13. Powder metallurgy bearings for advanced rocket engines

    Science.gov (United States)

    Fleck, J. N.; Killman, B. J.; Munson, H.E.

    1985-01-01

    Traditional ingot metallurgy was pushed to the limit for many demanding applications including antifriction bearings. New systems require corrosion resistance, better fatigue resistance, and higher toughness. With conventional processing, increasing the alloying level to achieve corrosion resistance results in a decrease in other properties such as toughness. Advanced powder metallurgy affords a viable solution to this problem. During powder manufacture, the individual particle solidifies very rapidly; as a consequence, the primary carbides are very small and uniformly distributed. When properly consolidated, this uniform structure is preserved while generating a fully dense product. Element tests including rolling contact fatigue, hot hardness, wear, fracture toughness, and corrosion resistance are underway on eleven candidate P/M bearing alloys and results are compared with those for wrought 440C steel, the current SSME bearing material. Several materials which offer the promise of a significant improvement in performance were identified.

  14. On Controllable Elastohydrodynamic Fluid Film Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger

    This thesis gives a theoretical description of the active tilting-pad journal bearing (ATPJB). It provides the qualified reader with the tools to model an ATPJB, while staying clear of pitfalls. The model is based on well known techniques and allows for local stability analyses, harmonic stationary...... are performed for a tilting-pad journal bearing (TPJB) and an ATPJB under static conditions, followed by a generalisation to dynamic conditions (transient as well as stationary harmonic). These analyses will be of interest to experimentalists, since they permit experiments performed on scaled down...... great care, since the addition of a control system may just as well harm rotor-bearing performance as improve it....

  15. Robust bearing estimation for 3-component stations

    Energy Technology Data Exchange (ETDEWEB)

    CLAASSEN,JOHN P.

    2000-02-01

    A robust bearing estimation process for 3-component stations has been developed and explored. The method, called SEEC for Search, Estimate, Evaluate and Correct, intelligently exploits the inherent information in the arrival at every step of the process to achieve near-optimal results. In particular the approach uses a consistent framework to define the optimal time-frequency windows on which to make estimates, to make the bearing estimates themselves, to construct metrics helpful in choosing the better estimates or admitting that the bearing is immeasurable, and finally to apply bias corrections when calibration information is available to yield a single final estimate. The algorithm was applied to a small but challenging set of events in a seismically active region. It demonstrated remarkable utility by providing better estimates and insights than previously available. Various monitoring implications are noted from these findings.

  16. Anterior cruciate ligament strain and tensile forces for weight-bearing and non-weight-bearing exercises: a guide to exercise selection.

    Science.gov (United States)

    Escamilla, Rafael F; Macleod, Toran D; Wilk, Kevin E; Paulos, Lonnie; Andrews, James R

    2012-03-01

    There is a growing body of evidence documenting loads applied to the anterior cruciate ligament (ACL) for weight-bearing and non-weight-bearing exercises. ACL loading has been quantified by inverse dynamics techniques that measure anterior shear force at the tibiofemoral joint (net force primarily restrained by the ACL), ACL strain (defined as change in ACL length with respect to original length and expressed as a percentage) measured directly in vivo, and ACL tensile force estimated through mathematical modeling and computer optimization techniques. A review of the biomechanical literature indicates the following: ACL loading is generally greater with non-weight-bearing compared to weight-bearing exercises; with both types of exercises, the ACL is loaded to a greater extent between 10° to 50° of knee flexion (generally peaking between 10° and 30°) compared to 50° to 100° of knee flexion; and loads on the ACL change according to exercise technique (such as trunk position). Squatting with excessive forward movement of the knees beyond the toes and with the heels off the ground tends to increase ACL loading. Squatting and lunging with a forward trunk tilt tend to decrease ACL loading, likely due to increased hamstrings activity. During seated knee extension, ACL force decreases when the resistance pad is positioned more proximal on the anterior aspect of the lower leg, away from the ankle. The evidence reviewed as part of this manuscript provides objective data by which to rank exercises based on loading applied to the ACL. The biggest challenge in exercise selection post-ACL reconstruction is the limited knowledge of the optimal amount of stress that should be applied to the ACL graft as it goes through its initial incorporation and eventual maturation process. Clinicians may utilize this review as a guide to exercise selection and rehabilitation progression for patients post-ACL reconstruction. PMID:22387600

  17. Big Bear Exploration Ltd. 1998 annual report

    International Nuclear Information System (INIS)

    During the first quarter of 1998 Big Bear completed a purchase of additional assets in the Rainbow Lake area of Alberta in which light oil purchase was financed with new equity and bank debt. The business plan was to immediately exploit these light oil assets, the result of which would be increased reserves, production and cash flow. Although drilling results in the first quarter on the Rainbow Lake properties was mixed, oil prices started to free fall and drilling costs were much higher than expected. As a result, the company completed a reduced program which resulted in less incremental loss and cash flow than it budgeted for. On April 29, 1998, Big Bear entered into agreement with Belco Oil and Gas Corp. and Moan Investments Ltd. for the issuance of convertible preferred shares at a gross value of $15,750,000, which shares were eventually converted at 70 cents per share to common equity. As a result of the continued plunge in oil prices, the lending value of the company's assets continued to fall, requiring it to take action in order to meet its financial commitments. Late in the third quarter Big Bear issued equity for proceeds of $11,032,000 which further reduced the company's debt. Although the company has been extremely active in identifying and pursuing acquisition opportunities, it became evident that Belco Oil and Gas Corp. and Big Bear did nor share common criteria for acquisitions, which resulted in the restructuring of their relationship in the fourth quarter. With the future of oil prices in question, Big Bear decided that it would change its focus to that of natural gas and would refocus ts efforts to acquire natural gas assets to fuel its growth. The purchase of Blue Range put Big Bear in a difficult position in terms of the latter's growth. In summary, what started as a difficult year ended in disappointment

  18. Conflict Bear Translocation: Investigating Population Genetics and Fate of Bear Translocation in Dachigam National Park, Jammu and Kashmir, India

    OpenAIRE

    Mukesh,; Sharma, Lalit Kumar; Charoo, Samina Amin; Sathyakumar, Sambandam

    2015-01-01

    The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth ‘conflict bears’ from different sit...

  19. Diffuse infiltrative lung disease

    International Nuclear Information System (INIS)

    The authors discuss their approach to the diagnosis and management of patients with DILD. Gallium scans play a central role in this process. Not only do they help them decide whom to biopsy, but also where to biopsy. The scans can be used for the early detection of disease in a high-risk population, for following the progression and regression of disease, for the regulation of medication, and for the evaluation of therapy. Bronchoalveolar lung lavage appears to be equally sensitive. However, patients are less willing to undergo repeated fiberoptic bronchoscopies than lung scans. Both tests may prove useful, one complementing the other. Gallium imaging has also been utilized by the authors in select patients with questionable diffuse lung infiltrates roentgenographically or with a normal chest roentgenogram, chronic respiratory symptoms, and abnormal pulmonary function studies. An abnormal gallium lung scan in these clinical situations helps them select which patients have a diffuse active pulmonary process meriting transbronchial biopsies. This has proven to be of particular value in the management of older patients

  20. Lung cancer: assessing resectability

    OpenAIRE

    Quint, Leslie E

    2003-01-01

    Staging classification in patients with non-small cell lung cancer does not always correlate perfectly with surgical resectability. Therefore, it is important to evaluate individual features of a patient’s tumor in order to determine if surgical resection is the optimal method of treatment, regardless of tumor stage. Such features include characteristics of the primary tumor, regional lymph nodes and distant sites.

  1. Lung gallium scan

    Science.gov (United States)

    ... Critical Care, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA. Also reviewed by David Zieve, MD, MHA, Isla Ogilvie, PhD, and the A.D.A.M. Editorial team. Related MedlinePlus Health Topics Lung Diseases Nuclear Scans Sarcoidosis Browse the Encyclopedia A.D.A. ...

  2. Cationic ruthenium alkylidene catalysts bearing phosphine ligands

    OpenAIRE

    Endo, Koji; Grubbs, Robert H.

    2016-01-01

    The discovery of highly active catalysts and the success of ionic liquid immobilized systems have accelerated attention to a new class of cationic metathesis catalysts. We herein report the facile syntheses of cationic ruthenium catalysts bear-ing bulky phosphine ligands. Simple ligand exchange using silver(I) salts of non-coordinating or weakly coordinating anions pro-vided either PPh3 or chelating Ph2P(CH2)nPPh2 (n = 2 or 3) ligated cationic catalysts. The structures of these newly reported...

  3. A CAD approach to magnetic bearing design

    Science.gov (United States)

    Jeyaseelan, M.; Anand, D. K.; Kirk, J. A.

    1988-01-01

    A design methodology has been developed at the Magnetic Bearing Research Laboratory for designing magnetic bearings using a CAD approach. This is used in the algorithm of an interactive design software package. The package is a design tool developed to enable the designer to simulate the entire process of design and analysis of the system. Its capabilities include interactive input/modification of geometry, finding any possible saturation at critical sections of the system, and the design and analysis of a control system that stabilizes and maintains magnetic suspension.

  4. Wear Analysis of Wind Turbine Gearbox Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Walker, Larry R [ORNL; Xu, Hanbing [ORNL; Parten, Randy J [ORNL; Qu, Jun [ORNL; Geer, Tom [ORNL

    2010-04-01

    The objective of this effort was to investigate and characterize the nature of surface damage and wear to wind turbine gearbox bearings returned from service in the field. Bearings were supplied for examination by S. Butterfield and J. Johnson of the National Wind Technology Center (NREL), Boulder, Colorado. Studies consisted of visual examination, optical and electron microscopy, dimensional measurements of wear-induced macro-scale and micro-scale features, measurements of macro- and micro-scale hardness, 3D imaging of surface damage, studies of elemental distributions on fracture surfaces, and examinations of polished cross-sections of surfaces under various etched and non-etched conditions.

  5. Grouted Pile and Its Bearing Capacity

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The grouting method applied in bored pile is an improvement to the conventional bored pile. Load tests have proved that grouting under the bored pile tip is an effective method to enhance the bearing capacity of the pile and to reduce the pile settlement. In this paper, the grouting technology is described and pile-load test results are discussed. In order to put the grouting method into design practice, the authors analyze the working mechanism of soil compaction. And, based on the theory of cavities expansion in soil mass, approximate formulae are proposed for estimating the bearing capacity of the grouted pile. The theoretical prediction agrees well with the load test results.

  6. Rotor/bearing system dynamic stiffness measurements

    Science.gov (United States)

    Muszynska, A.

    1985-01-01

    Sweep perturbation testing as used in Modal Analysis when applied to a rotating machine has to take into consideration the machine dynamic state of equilibrium at its operational rotative speed. This stands in contrasts to a static equilibrium of nonrotating structures. The rotational energy has a significant influence on rotor dynamic characteristics. The best perturbing input for rotating machines is a forward or reverse rotating, circular force applied directly to the shaft. Determination of Dynamic Stiffness Characteristics of the rotor bearing system by nonsynchronous perturbation of a symmetric rotating shaft supported in one relatively rigid and one oil lubricated bearing.

  7. Bear Lake Basin : History, geology, biology, people

    OpenAIRE

    Palacios, Patsy; Luecke, Chris; Robinson, Justin

    2007-01-01

    Bear Lake is a large, deep lake located on the border of Utah and Idaho in Rich County Utah and Bear Lake County Idaho. It was formed through seismic activity along a fault on the eastern side of the lake. Tectonic shifts of the plates along this fault resulted in a lake basin that is over 200 ft deep along the eastern shore with a gradual slope to the western shore. The lake water has high concentrations of calcium carbonate because of high levels of evaporation typical of this semi-arid ...

  8. ACS air bearing test-bed design

    OpenAIRE

    Glitt, Sascha

    2010-01-01

    This thesis is about the construction and design of a new air bearing test-bed to verify the programmed ACS attitude control algorithm and to validate the ACS MATLAB/SimuLink¬ model of NPSAT1, the second small satellite currently under development at the Naval Postgraduate School Space Systems Academic Group. The software was already verified and validated using a comparable air bearing test-bed. But due to changes in hardware from commercial magnetic torque rods to custom, NPS-built, magneti...

  9. Higher lung accumulation of intravenously injected organic nanotubes

    Directory of Open Access Journals (Sweden)

    Maitani Y

    2013-01-01

    Full Text Available Yoshie Maitani,1 Yuri Nakamura,1 Masao Kon,1 Emi Sanada,1 Kae Sumiyoshi,1 Natsuki Fujine,1 Masumi Asakawa,2 Masaki Kogiso,2 Toshimi Shimizu21Institute of Medicinal Chemistry, Hoshi University, Tokyo, Japan; 2Nanotube Research Center (NTRC, National Institute of Advanced Industrial Science and Technology (AIST, Tsukuba, JapanAbstract: The size and shape of intravenously injected particles can affect their biodistribution and is of importance for the development of particulated drug carrier systems. In this study, organic nanotubes (ONTs with a carboxyl group at the surface, a length of approximately 2 µm and outer diameter of 70–90 nm, were injected intravenously into tumor-bearing mice. To use ONTs as drug carriers, the biodistribution in selected organs of ONTs postinjection was examined using irinotecan, as an entrapped water-soluble marker inside ONTs, and gadolinium-chelated ONT, as an ONT marker, and compared with that of a 3 µm fluorescently labeled spherical microparticle which was similar size to the length of ONTs. It was found that for irinotecan, its active metabolite and gadolinium-chelated ONTs were highly accumulated in the lung, but to a lower level in the liver and spleen. On the other hand, microparticles deposited less in the lung and more highly in the liver. Moreover, histologic examination showed ONTs distributed more in lung tissues in part, whereas microparticles were present in blood vessels postinjection. These preliminary results support the notion of using negatively charged ONTs as intravascular carriers to maximize accumulation in the lung whilst reducing sequestration by the liver and spleen. This finding suggested that ONTs are potential carriers for lung-targeting drug delivery.Keywords: organic nanotube, lung, biodistribution, microparticle, particle shape

  10. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

    Directory of Open Access Journals (Sweden)

    David Fraser

    2013-09-01

    Full Text Available The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  11. On the Design of Tilting-Pad Thrust Bearings

    DEFF Research Database (Denmark)

    Heinrichson, Niels

    2007-01-01

    Pockets are often machined in the surfaces of tilting-pad thrust bearings to allow for hydrostatic jacking in the start-up phase. Pockets and other recesses in the surfaces of bearing pads influence the pressure distribution and thereby the position of the pivot resulting in the most advantageous...... based on the Reynolds equation are used. They include the effects of variations of viscosity with temperature and the deformation of the bearing pads due to pressure and thermal gradients. The models are validated using measurements. Tilting-pad bearings of standard design are studied and the influences...... geometries are given. Parallel-step bearings theoretically have smaller friction coefficients than tilting-pad bearings. A design of a tilting-pad bearing is suggested which combines the benefits of the two types of bearings in a tilting-pad bearing with inlet pockets. This design results in a substantial...

  12. LUNGEOMETRY- GEOMETRICAL INVESTIGATION OF LUNGE

    Directory of Open Access Journals (Sweden)

    R.Vinodh Rajkumar

    2015-02-01

    Full Text Available Physiotherapists must learn the biomechanics of lunge in detail to clearly understand its significance in human life and implement effective training measures to overcome the limiting factors of proper lunge of their clientele. To understand the biomechanical value of every movement, interesting experimental learning methods must be employed to kindle the Physiotherapists to actively take part in research activities from the under-graduate level onwards. Lungeometry is a novel, simple and inexpensive experimental investigation of lunge, applying basic geometrical methods taking near normal lower limb length dimensions and rationale approaches into consideration. Lungeometry can give a foundation to learn other forms of lunges like forward lunge, weighted lunges, lateral lunges. This model of learning biomechanics of movements using fundamental geometry techniques is expected to strongly connect with any futuristic Physiotherapy curricular structure.

  13. /sup 67/Ga lung scan

    Energy Technology Data Exchange (ETDEWEB)

    Niden, A.H.; Mishkin, F.S.; Khurana, M.M.L.; Pick, R.

    1977-03-21

    Twenty-three patients with clinical signs of pulmonary embolic disease and lung infiltrates were studied to determine the value of gallium citrate /sup 67/Ga lung scan in differentiating embolic from inflammatory lung disease. In 11 patients without angiographically proved embolism, only seven had corresponding ventilation-perfusion defects compatible with inflammatory disease. In seven of these 11 patients, the /sup 67/Ga concentration indicated inflammatory disease. In the 12 patients with angiographically proved embolic disease, six had corresponding ventilation-perfusion defects compatible with inflammatory disease. None had an accumulation of /sup 67/Ga in the area of pulmonary infiltrate. Thus, ventilation-perfusion lung scans are of limited value when lung infiltrates are present. In contrast, the accumulation of /sup 67/Ga in the lung indicates an inflammatory process. Gallium imaging can help select those patients with lung infiltrates who need angiography.

  14. Lubricant replacement in rolling element bearings for weapon surety devices

    Energy Technology Data Exchange (ETDEWEB)

    Steinhoff, R.; Dugger, M.T.; Varga, K.S. [Sandia National Laboratories, Albuquerque, NM (United States)

    1996-05-01

    Stronglink switches are a weapon surety device that is critical to the nuclear safety theme in modem nuclear weapons. These stronglink switches use rolling element bearings which contain a lubricant consisting of low molecular weight polytetrafluoroethylene (PTFE) fragments. Ozone-depleting solvents are used in both the manufacture and application of this lubricant. An alternate bearing lubrication for stronglink switches is needed that will provide long-term chemical stability, low migration and consistent performance. Candidates that were evaluated include bearings with sputtered MoS{sub 2} on the races and retainers, bearings with TiC-coated balls, and bearings with Si{sub 3}N{sub 4} balls and steel races. These candidates were compared to the lubricants currently used which are bearings lubricated with PTFE fragments of low molecular weight in a fluorocarbon solvent. The candidates were also compared to bearings lubricated with a diester oil which is representative of bearing lubricants used in industrial applications. Evaluation consisted of cycling preloaded bearings and subjecting them to 23 gRMS random vibration. All of the candidates are viable substitutes for low load application where bearing preload is approximately 1 pound. For high load applications where the bearing preload is approximately 10 pounds, bearings with sputtered MoS{sub 2} on the races and retainers appear to be the best substitutes. Bearings with TiC-coated balls also appear to be a viable candidate but these bearings did not perform as well as the sputtered MoS{sub 2}.

  15. Extended Life Testing of Duplex Ball Bearings

    Science.gov (United States)

    Mobley, Jeffrey; Robertson, Michael; Hodges, Charles

    2016-01-01

    Sierra Nevada Corporation’s Space Systems performed bearing life testing for the Scan Mirror Motor/Encoder Assembly (SMMA), part of the Scan Mirror Assembly on-board the Aerosol Polarimetry Sensor (APS) on the NASA Glory Spacecraft. The baseline bearing life test duration extended beyond the launch date for the Glory Spacecraft; a risk that the program was willing to undertake with the understanding that if any anomalies or failures occurred before the required life was achieved, then the mission objectives or operating profile could be modified on orbit to take those results into account. Even though the Glory Spacecraft failed to reach orbit during its launch in March of 2011, the bearing life testing was continued through a mutual understanding of value between Sierra Nevada Corporation and our customer; with a revised goal of testing to failure rather than completing a required number of life cycles. Life testing thus far has not only exceeded the original mission required life, but has also exceeded the published test data for Cumulative Degradation Factor (CDF) from NASA/CR-2009-215681. Many lessons were learned along the way regarding long life testing. The bearing life test has been temporarily suspended due to test support equipment issues.

  16. Angular-momentum-bearing modes in fission

    International Nuclear Information System (INIS)

    The angular-momentum-bearing degrees of freedom involved in the fission process are identified and their influence on experimental observables is discussed. The excitation of these modes is treated in the ''thermal'' limit, and the resulting distributions of observables are calculated. Experiments demonstrating the role of these modes are presented and discussed. 61 refs., 12 figs

  17. Bearings fault detection using inference tools

    OpenAIRE

    Prieto, Miguel Delgado; Roura, Jordi Cusidó i; Martínez, Jose Luis Romeral

    2011-01-01

    The most used electric machine in the industry is the Induction Motor (IM), due to its simplicity and reduced cost. The analysis of the origin of IMs failures exhibits that the bearings are the major source of fault, and even a common cause of degradation in other kinds of motors as Permanent Magnet Synchronous Machines.

  18. The economics of roadside bear viewing

    Science.gov (United States)

    Richardson, Leslie; Rosen, Tatjana; Gunther, Kerry; Schwartz, Chuck

    2014-01-01

    Viewing bears along roadside habitats is a popular recreational activity in certain national parks throughout the United States. However, safely managing visitors during traffic jams that result from this activity often requires the use of limited park resources. Using unique visitor survey data, this study quantifies economic values associated with roadside bear viewing in Yellowstone National Park, monetary values that could be used to determine whether this continued use of park resources is warranted on economic grounds. Based on visitor expenditure data and results of a contingent visitation question, it is estimated that summer Park visitation would decrease if bears were no longer allowed to stay along roadside habitats, resulting in a loss of 155 jobs in the local economy. Results from a nonmarket valuation survey question indicate that on average, visitors to Yellowstone National Park are willing to pay around $41 more in Park entrance fees to ensure that bears are allowed to remain along roads within the Park. Generalizing this value to the relevant population of visitors indicates that the economic benefits of allowing this wildlife viewing opportunity to continue could outweigh the costs of using additional resources to effectively manage these traffic jams.

  19. Thermo-hydrodynamic lubrication in hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the thermo-hydrodynamic and the thermo-elasto-hydrodynamic lubrication. The algorithms are methodically detailed and each section is thoroughly illustrated.

  20. Weak and strong nonlinearities in magnetic bearings

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav

    2004-01-01

    Roč. 39, č. 7 (2004), s. 779-795. ISSN 0094-114X R&D Projects: GA ČR GA101/00/1471; GA AV ČR IBS2076301 Institutional research plan: CEZ:AV0Z2076919 Keywords : weak nonlinearitiy * strong nonlinearity * magnetics bearings Subject RIV: BI - Acoustics Impact factor: 0.605, year: 2004

  1. Experimental investigation of gas aerostatic bearings

    Czech Academy of Sciences Publication Activity Database

    Steinbauer, P.; Šika, Z.; Kozánek, Jan; Šimek, J.

    2008-01-01

    Roč. 3, - (2008), s. 769-776. ISSN 1335-2393 R&D Projects: GA ČR GA101/06/1787 Institutional research plan: CEZ:AV0Z20760514 Keywords : aerostatic bearing * experimental identification * measurement Subject RIV: BI - Acoustics

  2. Surface layer characterisation of bearing rings

    Directory of Open Access Journals (Sweden)

    S.J. Skrzypek

    2007-11-01

    Full Text Available austenite. Theoretical calculation of residual macro-stresses due to volume fraction of transformed austenite in bearing rings and following measurements of residual stresses were carried out as well. The bearing elements were made of 100Cr6 steel and they were smoothed and grinded.Design/methodology/approach: Particular features of diffraction patterns like angle position; shape and intensity are used to characterize phase composition, residual micro and macro-stresses, crystallographic texture, lattice parameter, defects density and crystalline size.Findings: Machining by micro-deformation causes microstructural changes i.e. mechanically induced phase transformation of retained austenite and residual macrostresses. E.g. grinding cased tension and small compression whereas the mechanical smoothing of bearing rings caused high compresive residual stresses about -713 MPa.Research limitations/implications: For precise interpretation of differences between following results needs another investigations: i.e. measurement of retained austenite and residual stresses in rings after heat treatment before any mechanical treatment.Practical implications: The non-destructive character and large number of structural informations contained in diffraction pattern are the beneficial feature of diffraction methods. Therefore they have potential ability in application to technological operations and to diagnostic during fatigue.Originality/value: The non-destructive structure characterisation of surface layers for various kinds of bearing rings can be powerful method in surface characterization and in quality control. This results contribute in general relations between microstructure and properties.

  3. MAGNETIC FLUID BEARINGS OF MINING EQUIPMENT

    Directory of Open Access Journals (Sweden)

    I. Gorlov

    2012-01-01

    Full Text Available The paper considers a problem pertaining to selection friction pair materials for plain bearings of mining equipment which are lubricated with  nano-dispersed magnetic oil. Methodology for equipment tests, technology for obtaining new anti-friction materials (polymer, ceramic, amorphous and investigation results are presented in the paper.

  4. Load-Bearing Capacity of Roof Trusses

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Damkilde, Lars; Munch-Andersen, J.

    2004-01-01

    structural systems such as roof trusses are established and statistical characteristics of the load bearing capacity are determined. The results show that there is a significant increase in the characteristic (nominal) value and a reduction in the coefficient of variation (COV) for typical loads such as...

  5. Increased mean lung density: Another independent predictor of lung cancer?

    Energy Technology Data Exchange (ETDEWEB)

    Sverzellati, Nicola, E-mail: nicola.sverzellati@unipr.it [Department of Department of Surgical Sciences, Section of Diagnostic Imaging, University of Parma, Padiglione Barbieri, University Hospital of Parma, V. Gramsci 14, 43100 Parma (Italy); Randi, Giorgia, E-mail: giorgia.randi@marionegri.it [Department of Epidemiology, Mario Negri Institute, Via La Masa 19, 20156 Milan (Italy); Spagnolo, Paolo, E-mail: paolo.spagnolo@unimore.it [Respiratory Disease Unit, Center for Rare Lung Disease, Department of Oncology, Hematology and Respiratory Disease, University of Modena and Reggio Emilia, Via del Pozzo 71, 44124 Modena (Italy); Marchianò, Alfonso, E-mail: alfonso.marchiano@istitutotumori.mi.it [Department of Radiology, Fondazione IRCCS Istituto Nazionale dei Tumori, Via Venezian 1, 20133 Milan (Italy); Silva, Mario, E-mail: mac.mario@hotmail.it [Department of Department of Surgical Sciences, Section of Diagnostic Imaging, University of Parma, Padiglione Barbieri, University Hospital of Parma, V. Gramsci 14, 43100 Parma (Italy); Kuhnigk, Jan-Martin, E-mail: Jan-Martin.Kuhnigk@mevis.fraunhofer.de [Fraunhofer MEVIS, Universitaetsallee 29, 28359 Bremen (Germany); La Vecchia, Carlo, E-mail: carlo.lavecchia@marionegri.it [Department of Occupational Health, University of Milan, Via Venezian 1, 20133 Milan (Italy); Zompatori, Maurizio, E-mail: maurizio.zompatori@unibo.it [Department of Radiology, Cardio-Thoracic Section, S. Orsola-Malpighi Hospital, Via Albertoni 15, 40138 Bologna (Italy); Pastorino, Ugo, E-mail: ugo.pastorino@istitutotumori.mi.it [Department of Surgery, Section of Thoracic Surgery, Fondazione IRCCS Istituto Nazionale dei Tumori, Via Venezian 1, 20133 Milan (Italy)

    2013-08-15

    Objectives: To investigate the relationship between emphysema phenotype, mean lung density (MLD), lung function and lung cancer by using an automated multiple feature analysis tool on thin-section computed tomography (CT) data. Methods: Both emphysema phenotype and MLD evaluated by automated quantitative CT analysis were compared between outpatients and screening participants with lung cancer (n = 119) and controls (n = 989). Emphysema phenotype was defined by assessing features such as extent, distribution on core/peel of the lung and hole size. Adjusted multiple logistic regression models were used to evaluate independent associations of CT densitometric measurements and pulmonary function test (PFT) with lung cancer risk. Results: No emphysema feature was associated with lung cancer. Lung cancer risk increased with decreasing values of forced expiratory volume in 1 s (FEV{sub 1}) independently of MLD (OR 5.37, 95% CI: 2.63–10.97 for FEV{sub 1} < 60% vs. FEV{sub 1} ≥ 90%), and with increasing MLD independently of FEV{sub 1} (OR 3.00, 95% CI: 1.60–5.63 for MLD > −823 vs. MLD < −857 Hounsfield units). Conclusion: Emphysema per se was not associated with lung cancer whereas decreased FEV{sub 1} was confirmed as being a strong and independent risk factor. The cross-sectional association between increased MLD and lung cancer requires future validations.

  6. Increased mean lung density: Another independent predictor of lung cancer?

    International Nuclear Information System (INIS)

    Objectives: To investigate the relationship between emphysema phenotype, mean lung density (MLD), lung function and lung cancer by using an automated multiple feature analysis tool on thin-section computed tomography (CT) data. Methods: Both emphysema phenotype and MLD evaluated by automated quantitative CT analysis were compared between outpatients and screening participants with lung cancer (n = 119) and controls (n = 989). Emphysema phenotype was defined by assessing features such as extent, distribution on core/peel of the lung and hole size. Adjusted multiple logistic regression models were used to evaluate independent associations of CT densitometric measurements and pulmonary function test (PFT) with lung cancer risk. Results: No emphysema feature was associated with lung cancer. Lung cancer risk increased with decreasing values of forced expiratory volume in 1 s (FEV1) independently of MLD (OR 5.37, 95% CI: 2.63–10.97 for FEV1 < 60% vs. FEV1 ≥ 90%), and with increasing MLD independently of FEV1 (OR 3.00, 95% CI: 1.60–5.63 for MLD > −823 vs. MLD < −857 Hounsfield units). Conclusion: Emphysema per se was not associated with lung cancer whereas decreased FEV1 was confirmed as being a strong and independent risk factor. The cross-sectional association between increased MLD and lung cancer requires future validations

  7. Transforming growth factor-beta signaling network regulates plasticity and lineage commitment of lung cancer cells

    OpenAIRE

    Ischenko, I; Liu, J.; Petrenko, O; Hayman, M J

    2014-01-01

    Identification of target cells in lung tumorigenesis and characterization of the signals that control their behavior is an important step toward improving early cancer diagnosis and predicting tumor behavior. We identified a population of cells in the adult lung that bear the EpCAM+CD104+CD49f+CD44+CD24loSCA1+ phenotype and can be clonally expanded in culture, consistent with the properties of early progenitor cells. We show that these cells, rather than being restricted to one tumor type, ca...

  8. Noninvasive assessment of peroxidative lung damage by HIPDM lung scanning

    Energy Technology Data Exchange (ETDEWEB)

    Miniati, M.; Borrelli, E.; Monti, S.; Cocci, F.; Solfanelli, S.; Giani, L.; Pistolesi, M. (Univ. of Pisa (Italy) Univ. of Siena, (Italy))

    1991-03-15

    The basic compound iodobenzyl-propanediamine (HIPDM), when given intravenously, is extracted by the lungs whence it is effluxed at a slow exponential rate. In humans (normal non smokers), the mean residence time ({bar t}) of 123I-HIPDM, assessed by external detection, averages 7.2 {plus minus} 1.1 hrs. Persistence of HIPDM in lungs is significantly increased in asymptomatic smokers and, to a greater extent, in patients with ARDS. Since production of free oxygen radicals reportedly occurs as a consequence of smoke exposure and in the course of acute lung injury, the authors hypothesized that the prolonged persistence of HIPDM in the lungs of smokers and of patients with ARDS might reflect a peroxidative damage of lung tissue. They tested this hypothesis in rabbits since their baseline HIPDM lung clearance is similar to that of nonsmoking humans. In rabbits, acute lung injury was induced by phorbol myristate acetate. Three hrs after PMA administration, the animals received an i.v. bolus of {sup 131}I-HIPDM. Radioactivity over the chest was recorded for 2 hrs by gamma camera and HIPDM mean residence time in the lungs was computed. Thereafter, the animals were sacrificed and their lungs were removed to measure wet/dry weight ratio as index of lung edema and malondialdehyde (MDA) content as index of lipid peroxidation. HIPDM mean residence time was positively correlated with MDA level in lung tissue, but not with wet/dry weight ratio. Noninvasive assessment of HIPDM lung kinetics may then serve as specific in vivo marker of peroxidative lung injury.

  9. Rb and p53 gene deletions in lung adenocarcinomas from irradiated and control mice

    International Nuclear Information System (INIS)

    This study was conducted on mouse lung adenocarcinoma tissues that were formalin-treated and paraffin-embedded 25 years ago to investigate the large gene deletions of mRb and p53 in B6CF1 male mice. A total of 80 lung tissue samples from irradiated mice and 40 lung samples from nonirradiated controls were randomly selected and examined in the mRb portion of this study. The results showed a significant (P 0.05) from that for spontaneous lung adenocarcinomas or lung adenocarcinomas from mice exposed to single-dose γ irradiation at a similar total dose. mRb fragments 3 (71%) and 5 (67%), the parts of the gene that encoded the pocket binding region of Rb protein to adenovirus E1A and SV40 T-antigen, were the most frequently deleted fragments. p53 gene deletion analysis was carried out on normal lungs and lung adenocarcinomas that were initially found to bear mRb deletions. Exons 1,4,5,6, and 9 were chosen to be analyzed

  10. Grievous Temporal and Occipital Injury Caused by a Bear Attack

    OpenAIRE

    Sampath Chandra Prasad; Nikhil Dinaker Thada; Pallavi Rao; Smitha Rani Thada; Kishore Chandra Prasad

    2013-01-01

    Bear attacks are reported from nearly every part of the world. The chance of a human encountering a bear increases as the remote bear territory diminishes. The sloth bear is one of the three species of bears found in India, which inhabits the forests of India and its neighboring countries. Here we describe a teenager who came to us with a critical injury involving the face, temporal and occipital bones inflicted by a sloth bear attack. He underwent a temporal exploration, facial nerve decompr...

  11. Computing Operating Characteristics Of Bearing/Shaft Systems

    Science.gov (United States)

    Moore, James D.

    1996-01-01

    SHABERTH computer program predicts operating characteristics of bearings in multibearing load-support system. Lubricated and nonlubricated bearings modeled. Calculates loads, torques, temperatures, and fatigue lives of ball and/or roller bearings on single shaft. Provides for analysis of reaction of system to termination of supply of lubricant to bearings and other lubricated mechanical elements. Valuable in design and analysis of shaft/bearing systems. Two versions of SHABERTH available. Cray version (LEW-14860), "Computing Thermal Performances Of Shafts and Bearings". IBM PC version (MFS-28818), written for IBM PC-series and compatible computers running MS-DOS.

  12. Regeneration of the lung: Lung stem cells and the development of lung mimicking devices.

    Science.gov (United States)

    Schilders, Kim A A; Eenjes, Evelien; van Riet, Sander; Poot, André A; Stamatialis, Dimitrios; Truckenmüller, Roman; Hiemstra, Pieter S; Rottier, Robbert J

    2016-01-01

    Inspired by the increasing burden of lung associated diseases in society and an growing demand to accommodate patients, great efforts by the scientific community produce an increasing stream of data that are focused on delineating the basic principles of lung development and growth, as well as understanding the biomechanical properties to build artificial lung devices. In addition, the continuing efforts to better define the disease origin, progression and pathology by basic scientists and clinicians contributes to insights in the basic principles of lung biology. However, the use of different model systems, experimental approaches and readout systems may generate somewhat conflicting or contradictory results. In an effort to summarize the latest developments in the lung epithelial stem cell biology, we provide an overview of the current status of the field. We first describe the different stem cells, or progenitor cells, residing in the homeostatic lung. Next, we focus on the plasticity of the different cell types upon several injury-induced activation or repair models, and highlight the regenerative capacity of lung cells. Lastly, we summarize the generation of lung mimics, such as air-liquid interface cultures, organoids and lung on a chip, that are required to test emerging hypotheses. Moreover, the increasing collaboration between distinct specializations will contribute to the eventual development of an artificial lung device capable of assisting reduced lung function and capacity in human patients. PMID:27107715

  13. Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption of Disk and Bearing

    CERN Document Server

    Ghasemalizadeh, Omid; Sadeghi, Hossein; Ahmadian, Mohammad Taghi

    2013-01-01

    One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of inertia. Using these elements, the entire continuous system is discretized and the corresponding differential equation can be stated in matrix form. The bearings at the end of the shaft are modeled as equivalent spring and dampers which are applied as boundary conditions to the discretized system. In this paper the dynamics of a rotor-bearing system is analyzed, considering the gyroscopic effect. The thickness of the disk and bearings is also taken into account. Continuous model is used for shaft. Results Show that, the stiffness of the shaft and the natural frequencies of the system increase, while the amplitude of vibration decreases as a consequence of increasing the thickness of the bearing.

  14. Kenai Peninsula Brown Bear Studies : Report of the Interagency Brown Bear Study Team, 1986

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes work conducted during the 1986 field season on brown bear Ursus arctos from the Kenai Peninsula, Alaska. Ground surveys were conducted to...

  15. Dynamic lung transmission studies

    International Nuclear Information System (INIS)

    The aim of this study was to develop a non-invasive method for determining regional lungvolumes, which could replace bronchospirometry in routine clinical use. Transmission through the thorax of sup(99m)Tc-gammarays is measured by means of a gamma camera on line with a computer. The technique of measurement and data analysis is described and tested in several series of phantom studies. The results proved to be good: the mean difference with the real volumes was -4%. The error varied between -10% and +1. Transmission studies and bronchospirometry are compared in a group of 11 patients and there proved to be a good correspondence between the results of these methods. It is concluded that transmission experiments can determine the vital capacity of both lungs as a whole as accurately as spirometry and allows the measurement of vital capacity for each lung separately with the same accuracy as bronchospirometry. (Auth.)

  16. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

    OpenAIRE

    David Fraser; Sara Dubois

    2013-01-01

    Simple Summary The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia. Residents of this small community were surveyed by phone twice over the following year, before and after government actions. This study aimed to understand local attitudes on how these bears should be managed and whether they differed from existing bea...

  17. THE STRUCTURAL ANALYSIS OF STEEL SILOS WITH CYLINDRICAL-WALL BEARING AND PROFILE-STEEL BEARING

    OpenAIRE

    Zhengjun Tang; Daibiao Zhou; Chenwei Peng; Wenping Wu

    2015-01-01

    The silos are widely used in bulk material in many fields such as agriculture, mining, chemical, electric power storage, etc. Thin metal cylindrical silo shells are vulnerable to buckling failure caused by the compressive wall friction force. In this paper, the structural analysis of two types of steel silo with cylindrical-wall bearing and profile-steel bearing is implemented by Abaqus finite element analysis. The results indicate that under the same loading conditions, steel silos with prof...

  18. The thermodynamic properties of a new type catcher bearing used in active magnetic bearings system

    International Nuclear Information System (INIS)

    Normally a rotor levitated by active magnetic bearings (AMBs) system would rotate without contacting with any stator component, but the possibility still remains that the supporting force might lose temporarily or permanently, thus requiring the Catcher bearings (CBs) to provide backup protection in case of the failure of AMBs. A new type CB with two separate rolling element bearing series could have the speed distribution between the inner race and intermediate race according to certain ratio, in which the speed of each roller element bearing decreases with the limit speed of the whole CB increasing, offering high capability to sustain its initial rotation speed. Based on the theory of heat transfer, tribology, and rotor dynamics, this paper analyzes the thermal structure of double-decker catcher bearing (DDCB) and single-decker catcher bearing (SDCB), respectively. Through this structure, the thermal resistances and equations of heat transfer can be obtained. Then we calculate the friction heat and temperature distribution in the various CBs upon rotor's dropping on SDCB or DDCB, followed by the discussion on the CBs temperature rise's effects on lubrication conditions and rotor dynamics parameters. Finally various experiments are carried out to measure the temperature rise of different CBs. The results obtained validate the theoretical analysis and also provide main methods to reduce heat generation. Using DDCB is proved to be effective to reduce the temperature rise. - Highlights: • The DDCB is a more suitable catcher bearing for AMBs. • Compared to SDCB, using DDCB, the temperature rise can decrease in the same states. • A lower viscosity of lubricant may induce a lower temperature rise. • The inner raceway temperature of the first layer bearing is the highest. • Reducing the unbalance mass of the rotor is a method to decrease the temperature rise

  19. Biomechanical analysis of fixed bearing and mobile bearing total knee prostheses

    OpenAIRE

    Urwin, Samuel

    2014-01-01

    In total knee replacement (TKR) surgery, mobile bearing (MB) total knee prostheses were designed to more closely mimic the function of the normal knee than traditional fixed bearing (FB) designs by allowing axial mobility between the polyethylene insert and tibial tray. Despite the hypothetical benefits of the MB design, few studies have objectively analysed knee biomechanics during activities of daily living (ADLs) in the laboratory compared to FB designs. This thesis aimed to substantiate t...

  20. Angiosarcoma of the lung

    Science.gov (United States)

    Grafino, Mónica; Alves, Paula; de Almeida, Margarida Mendes; Garrido, Patrícia; Hasmucrai, Direndra; Teixeira, Encarnação; Sotto-Mayor, Renato

    2016-01-01

    Angiosarcoma is a rare malignant vascular tumor. Pulmonary involvement is usually attributable to metastasis from other primary sites, primary pulmonary angiosarcoma therefore being quite uncommon. We report a case of angiosarcoma with pulmonary involvement, probably primary to the lung, which had gone untreated for more than two years. We describe this rare neoplasm and its growth, as well as the extensive local invasion and hematogenous metastasis at presentation. We also discuss its poor prognosis. PMID:26982044

  1. Lung Cancer Stem Cells

    OpenAIRE

    Pine, Sharon R.; Blair Marshall; Lyuba Varticovski

    2008-01-01

    Lung cancer remains a major cause of cancer-related lethality because of high incidence and recurrence in spite of significant advances in staging and therapies. Recent data indicates that stem cells situated throughout the airways may initiate cancer formation. These putative stem cells maintain protumorigenic characteristics including high proliferative capacity, multipotent differentiation, drug resistance and long lifespan relative to other cells. Stem cell signaling and differentiation p...

  2. Chemotherapy of lung cancer.

    OpenAIRE

    Papac, R J

    1981-01-01

    The potential for substantial improvement in the outcome of patients with carcinoma of the lung seem most likely to develop in the field of chemotherapy. In the past decade, striking advances in the management of small cell carcinoma have yielded response rates and longer survival. While the greatest improvement can be predicted for patients whose disease is limited in extent, combination chemotherapy and combined modality therapy generally are effective in causing tumor regression for the ma...

  3. Congenital Cystic Lung Diseases

    Directory of Open Access Journals (Sweden)

    Aditi Jain

    2013-01-01

    Full Text Available Congenital cystic diseases of the lung are a rare but significant cause of morbidity in children and young adults presenting with respiratory distress and repeated chest infections. They consist of cystic adenomatoid malformation, bronchogenic cyst, pulmonary sequestration, and congenital lobar emphysema. Surgical treatment is a safe and an effective method of treatment. Chest X-ray and computed tomography are the key imaging modalities used for diagnosis.

  4. Angiosarcoma of the lung

    Energy Technology Data Exchange (ETDEWEB)

    Grafino, Monica; Alves, Paula; Almeida, Margarida Mendes de; Garrido, Patricia; Hasmucrai, Direndra; Teixeira, Encarnacao; Sotto-Mayor, Renato, E-mail: mgrafino@gmail.com [Centro Hospitalar Lisboa Norte, EPE, Lisboa (Portugal)

    2016-06-01

    Angiosarcoma is a rare malignant vascular tumor. Pulmonary involvement is usually attributable to metastasis from other primary sites, primary pulmonary angiosarcoma therefore being quite uncommon. We report a case of angiosarcoma with pulmonary involvement, probably primary to the lung, which had gone untreated for more than two years. We describe this rare neoplasm and its growth, as well as the extensive local invasion and hematogenous metastasis at presentation. We also discuss its poor prognosis. (author)

  5. Particles causing lung disease.

    OpenAIRE

    Kilburn, K H

    1984-01-01

    The lung has a limited number of patterns of reaction to inhaled particles. The disease observed depends upon the location: conducting airways, terminal bronchioles and alveoli, and upon the nature of inflammation induced: acute, subacute or chronic. Many different agents cause narrowing of conducting airways (asthma) and some of these cause permanent distortion or obliteration of airways as well. Terminal bronchioles appear to be particularly susceptible to particles which cause goblet cell ...

  6. The aging lung

    OpenAIRE

    Lowery EM; Brubaker AL; Kuhlmann E; Kovacs EJ

    2013-01-01

    Erin M Lowery,1 Aleah L Brubaker,2 Erica Kuhlmann,1 Elizabeth J Kovacs31Division of Pulmonary and Critical Care Medicine, Department of Internal Medicine at Loyola University Medical Center, 2Loyola University Stritch School of Medicine, 3Department of Surgery, Loyola University Medical Center, Maywood, IL, USAAbstract: There are many age-associated changes in the respiratory and pulmonary immune system. These changes include decreases in the volume of the thoracic cavity, reduced lung volume...

  7. Lung donor selection criteria.

    Science.gov (United States)

    Chaney, John; Suzuki, Yoshikazu; Cantu, Edward; van Berkel, Victor

    2014-08-01

    The criteria that define acceptable physiologic and social parameters for lung donation have remained constant since their empiric determination in the 1980s. These criteria include a donor age between 25-40, a arterial partial pressure of oxygen (PaO2)/FiO2 ratio greater than 350, no smoking history, a clear chest X-ray, clean bronchoscopy, and a minimal ischemic time. Due to the paucity of organ donors, and the increasing number of patients requiring lung transplant, finding a donor that meets all of these criteria is quite rare. As such, many transplants have been performed where the donor does not meet these stringent criteria. Over the last decade, numerous reports have been published examining the effects of individual acceptance criteria on lung transplant survival and graft function. These studies suggest that there is little impact of the historical criteria on either short or long term outcomes. For age, donors should be within 18 to 64 years old. Gender may relay benefit to all female recipients especially in male to female transplants, although results are mixed in these studies. Race matched donor/recipients have improved outcomes and African American donors convey worse prognosis. Smoking donors may decrease recipient survival post transplant, but provide a life saving opportunity for recipients that may otherwise remain on the transplant waiting list. No specific gram stain or bronchoscopic findings are reflected in recipient outcomes. Chest radiographs are a poor indicator of lung donor function and should not adversely affect organ usage aside for concerns over malignancy. Ischemic time greater than six hours has no documented adverse effects on recipient mortality and should not limit donor retrieval distances. Brain dead donors and deceased donors have equivalent prognosis. Initial PaO2/FiO2 ratios less than 300 should not dissuade donor organ usage, although recruitment techniques should be implemented with intent to transplant. PMID:25132970

  8. Lungs in Heart Failure

    Directory of Open Access Journals (Sweden)

    Anna Apostolo

    2012-01-01

    Full Text Available Lung function abnormalities both at rest and during exercise are frequently observed in patients with chronic heart failure, also in the absence of respiratory disease. Alterations of respiratory mechanics and of gas exchange capacity are strictly related to heart failure. Severe heart failure patients often show a restrictive respiratory pattern, secondary to heart enlargement and increased lung fluids, and impairment of alveolar-capillary gas diffusion, mainly due to an increased resistance to molecular diffusion across the alveolar capillary membrane. Reduced gas diffusion contributes to exercise intolerance and to a worse prognosis. Cardiopulmonary exercise test is considered the “gold standard” when studying the cardiovascular, pulmonary, and metabolic adaptations to exercise in cardiac patients. During exercise, hyperventilation and consequent reduction of ventilation efficiency are often observed in heart failure patients, resulting in an increased slope of ventilation/carbon dioxide (VE/VCO2 relationship. Ventilatory efficiency is as strong prognostic and an important stratification marker. This paper describes the pulmonary abnormalities at rest and during exercise in the patients with heart failure, highlighting the principal diagnostic tools for evaluation of lungs function, the possible pharmacological interventions, and the parameters that could be useful in prognostic assessment of heart failure patients.

  9. Advances in Lung Stem Cells and Lung Cancer Stem Cells

    Directory of Open Access Journals (Sweden)

    Huijing YIN

    2015-10-01

    Full Text Available Cancer stem cells (CSCs are emerging as a hot topic for cancer research. Lung CSCs share many characteristics with normal lung stem cells (SCs, including self-renewal and multi-potency for differentiation. Many molecular markers expressed in various types of CSCs were also found in lung CSCs, such as CD133, CD44, aldehyde dehydrogenase (ALDH and ATP-binding cassette sub-family G member 2 (ABCG2. Similarly, proliferation and expansion of lung CSCs are regulated not only by signal transduction pathways functioning in normal lung SCs, such as Notch, Hedgehog and Wnt pathways, but also by those acting in tumor cells, such as epidermal growth factor receptor (EGFR, signal transducer and activator of transcription 3 (STAT3 and phosphatidylinositol 3 kinase (PI3K pathways. As CSC plays an critical role in tumor recurrence, metastasis and drug-resistance, understanding the difference between lung CSCs and normal lung SCs, identifying and targeting CSC markers or related signaling pathways may increase the efficacy of therapy on lung cancer and improved survival of lung cancer patients.

  10. Population Parameters and Harvest Characteristics of Black Bears in Georgia

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes findings of black bear distribution and population trends throughout Georgia and evaluates black bear harvest trends from 1992 to 2002....

  11. Kodiak brown bear population on Kodiak Island, Alaska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Methods and estimates of the Brown bear population on Kodiak Island. The total number of Kodiak Brown Bears on Kodiak Island has been estimated to be 1669. Three...

  12. Investigation of tribological and mechanical properties of metal bearings

    Indian Academy of Sciences (India)

    Bekir Sadik Ünlü

    2009-08-01

    Copper, aluminum and tin–lead based alloys are widely used as journal bearing materials in tribological applications. Bronze and brass are widely used as journal bearing materials for copper based alloys. Zamacs find applications as journal bearing materials for zinc based alloys, while duralumines are chosen as journal bearing materials for aluminum based alloys. In addition, white metals are widely used as journal bearing materials for tin–lead based alloys. These alloys ensure properties expected from journal bearings. In this study, tribological and mechanical properties of these journal bearings manufactured by metals were investigated. SAE 1050 steel shaft was used as counter abrader. Experiments were carried out in every 30 min for a total of 150 min by using radial journal bearing wear test rig.

  13. Self-Bearing Motor-Generator for Flywheels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Self-bearing or ?bearingless? motors perform both motor and bearing support functions but such devices have not yet achieved speeds above 15,000 rpm. The innovation...

  14. Polar bear den survey, Arctic National Wildlife Range

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In conjunction with the Polar Bear Research Project being supervised by Mr. Jack Lentfer of the Bureau of Sport Fisheries and Wildlife two Polar Bear den surveys...

  15. Interchangeable Bearings for Profile and Weight Trade Studies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Air-Lock, Incorporated is proposing to design fully sealed shoulder and arm bearings with interchangeable bearing housings. The interchangeable housings shall be...

  16. Blade Bearing Friction Estimation of Operating Wind Turbines

    DEFF Research Database (Denmark)

    Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

    2012-01-01

    Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...... monitoring systems. A novel algorithm for online monitoring of bearing friction level is developed combining physical knowledge about pitch system dynamics with state estimator, i.e. observer theory and signal processing assuming realistic sensor availability. Results show estimation of bearing friction...

  17. A plan for the management of the Kodiak brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Management districts will be used as a tool to manage the population of bear on Kodiak Island. Theoretically, 204 bear may be taken off the refuge annually without...

  18. Shaft centre orbit for dynamically loaded radial bearings

    DEFF Research Database (Denmark)

    Klit, Peder; Vølund, Anders

    2002-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coefficients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 Booker1 and described further in 1972 Booker2. Several authors have refined...... this method over the years. In 1966 Jorgen W. Lund published an approach to find the dynamic coefficients of a journal bearing by a first order perturbation of the Reynold´s equation. These coefficients made it possible to perform a rotor-bearing stability analysis for a statically loaded bearing. In...... the mid seventies Jorgen W. Lund pointed out in lecture notes that the dynamic damping coefficients of the bearing could be used to find the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for finding the damping coefficients in...

  19. Lung cancer - non-small cell

    Science.gov (United States)

    Cancer - lung - non-small cell; Non-small cell lung cancer; NSCLC; Adenocarcinoma - lung; Squamous cell carcinoma - lung ... Smoking causes most cases (around 90%) of lung cancer. The risk ... day and for how long you have smoked. Being around the smoke ...

  20. Lung Cancer Screening and clinical implications

    NARCIS (Netherlands)

    S.C. van 't Westeinde (Susan)

    2012-01-01

    textabstractLung cancer is the most frequently diagnosed major cancer worldwide and the leading cause of death from cancer. Lung cancer is divided into two subgroups: small-cell lung cancer (SCLC) and non-small-cell lung cancer (NSCLC), accounting for 10-20% and 75% of lung cancer cases, respectivel

  1. Curcumin deteriorates trabecular and cortical bone in mice bearing metastatic Lewis lung carcinoma

    Science.gov (United States)

    Bone is a major target of metastasis for many malignancies; curcumin has been studied for its role in cancer prevention including early phase clinical trials for its efficacy and safe use with cancer patients. The present study investigated the effects of dietary supplementation with curcumin (2% a...

  2. Lung function; Lungenfunktion

    Energy Technology Data Exchange (ETDEWEB)

    Sorichter, S. [Universitaetsklinikum Freiburg, Abteilung Pneumologie, Freiburg (Germany)

    2009-08-15

    The term lung function is often restricted to the assessment of volume time curves measured at the mouth. Spirometry includes the assessment of lung volumes which can be mobilised with the corresponding flow-volume curves. In addition, lung volumes that can not be mobilised, such as the residual volume, or only partially as FRC and TLC can be measured by body plethysmography combined with the determination of the airway resistance. Body plethysmography allows the correct positioning of forced breathing manoeuvres on the volume-axis, e.g. before and after pharmacotherapy. Adding the CO single breath transfer factor (T{sub LCO}), which includes the measurement of the ventilated lung volume using He, enables a clear diagnosis of different obstructive, restrictive or mixed ventilatory defects with and without trapped air. Tests of reversibility and provocation, as well as the assessment of inspiratory mouth pressures (PI{sub max}, P{sub 0.1}) help to classify the underlying disorder and to clarify treatment strategies. For further information and to complete the diagnostic of disturbances of the ventilation, diffusion and/or perfusion (capillar-)arterial bloodgases at rest and under physical strain sometimes amended by ergospirometry are recommended. Ideally, lung function measurements are amended by radiological and nuclear medicine techniques. (orig.) [German] Unter dem Begriff Lungenfunktion wird die Bestimmung der Lungenvolumina am Mund verstanden. Dabei werden die mobilisierbaren Lungenvolumina mit den zugehoerigen Fluss-Volumen-Kurven mittels Spirometrie und Ganzkoerperplethysmographie (GKP) und die nicht (RV) und teilweise mobilisierbaren Lungenvolumina (FRC, TLC) einschliesslich der Atemwegswiderstaende bestimmt. Die GKP ermoeglicht zusaetzlich die korrekte (Volumenachsen-)Positionierung der forcierten Atemmanoever. Dieses erlaubt eine uebersichtlichere graphische Darstellung z. B. vor und nach der Applikation pharmakologisch wirksamer Substanzen. Wird die GKP

  3. The possibility of evaluating turbo-set bearing misalignment defects on the basis of bearing trajectory features

    Science.gov (United States)

    Rybczyński, Józef

    2011-02-01

    This paper presents the results of computer simulation of bearing misalignment defects in a power turbogenerator. This malfunction is typical for great multi-rotor and multi-bearing rotating machines and very common in power turbo-sets. Necessary calculations were carried out by the computer code system MESWIR, developed and used at the IFFM in Gdansk for calculating dynamics of rotors supported on oil bearings. The results are presented in the form of a set of journal and bush trajectories of all turbo-set bearings. Our analysis focuses on the vibrational effects of displacing the two most vulnerable machine bearings in horizontal and vertical directions by the maximum acceptable range calculated with regard to bearing vibration criterion. This assumption required preliminary assessment of the maximum values for the permissible bearing dislocations. We show the relations between the attributes of the particular bearing trajectories and the bearing displacements in relation to their base design position. The shape and dimensions of bearing trajectories are interpreted based on the theory of hydrodynamic lubrication of oil bearings. It was shown that the relative journal trajectories and absolute bush trajectories carry much important information about the dynamic state of the machine, indicating also the way in which bearings are loaded. Therefore, trajectories can be a source of information about the position and direction of bearing misalignments. This article indicates the potential of using trajectory patterns for diagnosing misalignment defects in rotating machines and suggests including sets of trajectory patterns to the knowledge base of a machine diagnostic system.

  4. Diagnostic Imaging of Lung Cancer

    Directory of Open Access Journals (Sweden)

    Kemal Kara

    2012-12-01

    Full Text Available Lung cancer is the most common cause of cancer related death in men and women. It is frequently seen among men than in women and male-female ratio is 1.5:1. Common epidemiological factors that increase risk of lung cancer is smoking. Early age to start smoking, high number of smoking cigarettes per a day and depth of inhalation increase risk of lung cancer. 25% of patients with lung cancer are nonsmokers that passively exposed to cigarette smoke. Occupational exposure to substances such as asbestos, arsenic, nickel, beryllium, mustard gas increases the risk of lung cancer. The well defined risk factor is exposure to asbestos. In addition advanced age, diffuse pulmonary fibrosis, chronic obstructive pulmonary disease (COPD and genetic predisposition are the risk factors that increases lung cancer. [TAF Prev Med Bull 2012; 11(6.000: 749-756

  5. Controversies in Lung Cancer Screening.

    Science.gov (United States)

    Gill, Ritu R; Jaklitsch, Michael T; Jacobson, Francine L

    2016-02-01

    There remains an extensive debate over lung cancer screening, with lobbying for and against screening for very compelling reasons. The National Lung Screening Trial, International Early Lung Cancer Program, and other major screening studies favor screening with low-dose CT scans and have shown a reduction in lung cancer-specific mortality. The increasing incidence of lung cancer and the dismal survival rate for advanced disease despite improved multimodality therapy have sparked an interest in the implementation of national lung cancer screening. Concerns over imaging workflow, radiation dose, management of small nodules, overdiagnosis bias, lead-time and length-time bias, emerging new technologies, and cost-effectiveness continue to be debated. The authors address each of these issues as they relate to radiologic practice. PMID:26846531

  6. Imaging diagnosis of gas exchange in patients with lung cancer

    International Nuclear Information System (INIS)

    Functional images of the ventilation-perfusion ratios and the mean transit time of Xe-133 were then obtained through computer analysis. In addition, an overall lung function test and arterial blood gas analysis were carried out on the same day. %V radical with Kr-81m during tidal breathing expressed as the percentage of tumor-bearing lung to total lung correlated significantly with %VC(r=0.666, p<0.0005). Likewise, there was a significant correlation (r=0.713, p<0.005) between %VC and %Q radical with Tc-99m MAA. The correlation coefficient between the relative mean transit time of Xe-133 and FEVsub(1.0)% was -0.433(p<0.1). On the other hand, FEVsub(1.0)% did not correlate with %V radical with Kr-81m and %Q radical Tc-99m MAA. Ventilation and perfusion in the affected lung showed no significant difference between UICC.TNM stages I and II. In stages III and IV, however, regional ventilation and perfusion decreased significantly. The T factor had a more serious influence on ventilation and perfusion in the affected lung than the N factor. The V radical sub(A)/Q radical sub(C) distribution was calculated from the functional image of the ventilation-perfusion ratios in 17 cases with lung cancer. Four types of V radical sub(A)/Q radical sub(C) distribution were found: Type I (a pattern with nearly normal distribution) was observed in 8 of 17 cases, Type II (a pattern with a high V radical sub(A)/Q radical area) was seen in 7 cases, Type III (a pattern with a low V radical sub(A)/Q radical area) was seen in one case, and Type IV (a pattern with both a high and low V radical sub(A)/Q radical area) was found in the remaining case. The functional image obtained with ventilation-perfusion scintigraphy allowed visual and quantitative evaluation of changes of regional lung function and provided important information on regional ventilation and perfusion in patients with lung cancer. (J.P.N.)

  7. Rotor stability estimation with competing tilting pad bearing models

    Science.gov (United States)

    Cloud, C. Hunter; Maslen, Eric H.; Barrett, Lloyd E.

    2012-05-01

    When predicting the stability of rotors supported by tilting pad journal bearings, it is currently debated whether or not the bearings should be represented with frequency dependent dynamics. Using an experimental apparatus, measurements of pad temperatures, unbalance response and stability are compared with modeling predictions for two tilting pad bearing designs. Predictions based on frequency dependent tilting pad bearing dynamics exhibited significantly better correlation with the stability measurements than those assuming frequency independent dynamics.

  8. Dynamic behaviour of ball bearing applications with constrained damping layers

    OpenAIRE

    Tillema, Hetzer G.

    2001-01-01

    Rolling bearing noise has become an aspect of increasing importance for the performance of rotating machinery, like electric motors and gearboxes. Generally, two aspects are important with regard to bearing noise, i.e. the transmission characteristics and the vibration generation characteristics. A potential source of vibrations are for example manufacturing imperfections of the different bearing components. Damping of bearing vibrations is enhanced by the lubrication film between the rolling...

  9. Stiffness calculation and application of spline-ball bearing

    Science.gov (United States)

    Gu, Bo-Zhong; Zhou, Yu-Ming; Yang, De-Hua

    2006-12-01

    Spline-ball bearing is widely adopted in large precision instruments because of its distinctive performance. For the sake of carrying out detail investigation of a full instrument system, practical stiffness formulae of such bearing are introduced with elastic contact mechanics, which are successfully applied for calculating the stiffness of the bearing used in astronomical telescope. Appropriate treatment of the stiffness of such bearing in the finite element analysis is also discussed and illustrated.

  10. Passive axial stabilization of a magnetic radial bearing by superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Marinescu, M.; Marinescu, N. (Ing.-Buro f. Magnettechnik, Mailander Str.19, D-6000 Frankfurt/M. 70 (DE)); Tenbrink, J.; Krauth, H. (Vacuumschmelze GmbH, Gruner Weg 37, D-6450 Hanau (DE))

    1989-09-01

    Contactless bearings for high-speed operation can be constructed using passive magnet systems, which inherently need a second, active bearing for their stabilization. Completely passive bearings only can be obtained using diamagnetic materials. This study deals with the axial stabilization of magnetic radial bearings using a permanent magnet/superconductor system. Using finite element calculation procedures it is shown that axial forces of up 3000 N and stiffnesses of up to 400 N/mm may be achieved.

  11. Primary choriocarcinoma of the lung

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ki Soon; Ok, In Don; Chung, Chong Ku [Eulji General Hospital, Seoul (Korea, Republic of)

    1990-04-15

    Extra uterine, nongestational choriocarcinoma is uncommon. Most cases arise in the gonads, mediastinum or retroperitoneum with a striking male predilection. Although the lungs are a frequent site of metastatic choriocarcinoma, primary choriocarcinoma of the lungs is extremely rare. Recently we experienced a case of primary choriocarcinoma of lung in 28-year-old female. So we report the case with review of literature including radiologic findings.

  12. Palliative Procedures in Lung Cancer

    OpenAIRE

    Masuda, Emi; Sista, Akhilesh K.; Pua, Bradley B.; Madoff, David C.

    2013-01-01

    Palliative care aims to optimize comfort and function when cure is not possible. Image-guided interventions for palliative treatment of lung cancer is aimed at local control of advanced disease in the affected lung, adjacent mediastinal structures, or distant metastatic sites. These procedures include endovascular therapy for superior vena cava syndrome, bronchial artery embolization for hemoptysis associated with lung cancer, and ablation of osseous metastasis. Pathophysiology, clinical pres...

  13. Intermediary metabolism of the lung.

    OpenAIRE

    Fisher, A B

    1984-01-01

    The lung is a metabolically active organ that is engaged in secretion, clearance and other maintenance functions that require reducing potential, energy and substrates for biosynthesis. These metabolic requirements are met in part through uptake and catabolism of glucose which represents the major fuel utilized by lung tissues. Gluconeogenesis does not occur, and glycogen stores are limited so that the lung depends on the circulation for its glucose requirement. Other substrates can be metabo...

  14. Lung cancer and air pollution.

    OpenAIRE

    Cohen, A J; Pope, C A

    1995-01-01

    Epidemiologic studies over the last 40 years suggest rather consistently that general ambient air pollution, chiefly due to the incomplete combustion of fossil fuels, may be responsible for increased rates of lung cancer. This evidence derives from studies of lung cancer trends, studies of occupational groups, comparisons of urban and rural populations, and case-control and cohort studies using diverse exposure metrics. Recent prospective cohort studies observed 30 to 50% increases in lung ca...

  15. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    the work is the characterization of magnetic forces by using two experimental different experimental approaches. Such approaches are investigated and described in details. A special test rig is designed where the 4 poles - AMB is able to generate forces up to 1900 N. The high precision......Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... characterization of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input...

  16. Static Load Distribution in Ball Bearings

    Science.gov (United States)

    Ricci, Mario

    2010-01-01

    A numerical procedure for computing the internal loading distribution in statically loaded, single-row, angular-contact ball bearings when subjected to a known combined radial and thrust load is presented. The combined radial and thrust load must be applied in order to avoid tilting between inner and outer rings. The numerical procedure requires the iterative solution of Z + 2 simultaneous nonlinear equations - where Z is the number of the balls - to yield an exact solution for axial and radial deflections, and contact angles. Numerical results for a 218 angular-contact ball bearing have been compared with those from the literature and show significant differences in the magnitudes of the ball loads, contact angles, and the extent of the loading zone.

  17. An Evershed type superconducting flywheel bearing

    Energy Technology Data Exchange (ETDEWEB)

    Cansiz, A.; Campbell, A.M.; Coombs, T.A

    2003-07-15

    The objective of this work is to develop a bearing using high temperature superconductors (HTSs) for use in an energy storage flywheel. The experimental apparatus includes a cylindrical rotor levitated with the Evershed design in which the majority of the levitation force is provided by a permanent magnet arrangement and the stabilization of the system is achieved by HTS elements. The design characteristics and dynamics of the bearing associated with the rotor part are presented. The instrumentation measures the out of balance force and magnetomechanical stiffness associated with the rotor. A study of the rotational losses was performed using free spin down experiments associated with magnetic field variation measurements. The results are consistent with the loss being caused by hysteresis in the superconductor due to magnet inhomogeneity.

  18. An Evershed type superconducting flywheel bearing

    International Nuclear Information System (INIS)

    The objective of this work is to develop a bearing using high temperature superconductors (HTSs) for use in an energy storage flywheel. The experimental apparatus includes a cylindrical rotor levitated with the Evershed design in which the majority of the levitation force is provided by a permanent magnet arrangement and the stabilization of the system is achieved by HTS elements. The design characteristics and dynamics of the bearing associated with the rotor part are presented. The instrumentation measures the out of balance force and magnetomechanical stiffness associated with the rotor. A study of the rotational losses was performed using free spin down experiments associated with magnetic field variation measurements. The results are consistent with the loss being caused by hysteresis in the superconductor due to magnet inhomogeneity

  19. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... the work is the characterization of magnetic forces by using two experimental different experimental approaches. Such approaches are investigated and described in details. A special test rig is designed where the 4 poles - AMB is able to generate forces up to 1900 N. The high precision...... characterization of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input...

  20. Radioactivity and the French uranium bearing minerals

    International Nuclear Information System (INIS)

    This special issue of Regne Mineral journal is entirely devoted to the French uranium mining industry. It comprises 4 parts dealing with: the uranium mining industry in France (history, uranium rush, deposits, geologic setting, prosperity and recession, situation in 1998, ore processing); radioactivity and the uranium and its descendants (discovery, first French uranium bearing ores, discovery of radioactivity, radium and other uranium descendants, radium mines, uranium mines, atoms, elements and isotopes, uranium genesis, uranium decay, isotopes in an uranium ore, spontaneous fission, selective migration of radionuclides, radon in mines and houses, radioactivity units, radioprotection standards, new standards and controversies, natural and artificial radioactivity, hazards linked with the handling and collecting of uranium ores, conformability with radioprotection standards, radioactivity of natural uranium minerals); the French uranium bearing minerals (composition, crystal structure, reference, etymology, fluorescence). (J.S.)

  1. Mechatronics Applied to Fluid Film Bearings: Towards More Efficient Machinery

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier

    Film Bearings: Towards more Efficient Machinery" was aimed at improving the state of the art regarding the usage of fluid film bearings as "smart" machine elements. Specifically, this project dealt with a tilting pad journal bearing design that features a controllable lubrication system, capable...

  2. 14 CFR 73.5 - Bearings; radials; miles.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Bearings; radials; miles. 73.5 Section 73.5 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRSPACE SPECIAL USE AIRSPACE General § 73.5 Bearings; radials; miles. (a) All bearings and radials in this...

  3. PROVIDING SERVICEABILITY OF STRUCTURAL BEARING TYPES FOR ROADWAY BRIDGES

    Directory of Open Access Journals (Sweden)

    R. I. Polyuga

    2010-03-01

    Full Text Available In the article the description of structural bearing types for roadway bridges and their classification is given. Special attention is paid to effective bearings with elastomeric materials – rubber, pot, spherical ones. Characteristic defects of structural bearings and demands of serviceability are noticed.

  4. 14 CFR 71.7 - Bearings, radials, and mileages.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Bearings, radials, and mileages. 71.7 Section 71.7 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... REPORTING POINTS § 71.7 Bearings, radials, and mileages. All bearings and radials in this part are true...

  5. 24 CFR 3285.202 - Soil classifications and bearing capacity.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Soil classifications and bearing... Soil classifications and bearing capacity. The soil classification and bearing capacity of the soil must be determined before the foundation is constructed and anchored. The soil classification...

  6. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition....

  7. Temperature Distribution and Scuffing of Tapered Roller Bearing

    Institute of Scientific and Technical Information of China (English)

    WANG Ailin; WANG Jiugen

    2014-01-01

    In the field of aerospace, high-speed trains and automobile, etc, analysis of temperature filed and scuffing failure of tapered roller bearings are more important than ever, and the scuffing failure of elements of such rolling bearings under heavy load and high speed still cannot be effectively predicted yet. A simplified model of tapered roller bearings consisted of one inner raceway, one outer raceway and a tapered roller was established, in which the interaction of several heat sources is ignored. The contact mechanics model, temperature model and model of scuffing failure are synthesized, and the corresponding computer programs are developed to analyze the effects of bearings parameters, different material and operational conditions on thermal performance of bearings, and temperature distribution and the possibility of surface scuffing are obtained. The results show that load, speed, thermal conductivity and tapered roller materials influence temperature rise and scuffing failure of bearings. Ceramic material of tapered roller results in the decrease of scuffing possibility of bearings to a high extent than the conventional rolling bearing steel. Compared with bulk temperature, flash temperature on the surfaces of bearing elements has a little influence on maximum temperature rise of bearing elements. For the rolling bearings operated under high speed and heavy load, this paper proposes a method which can accurately calculate the possibility of scuffing failure of rolling bearings.

  8. 77 FR 73967 - Drawbridge Operation Regulation; Bear Creek, Dundalk, MD

    Science.gov (United States)

    2012-12-12

    ... Regulation; Bear Creek, Dundalk, MD'' in the Federal Register (77 FR 5201). The rulemaking concerned would... SECURITY Coast Guard 33 CFR Part 117 RIN 1625-AA09 Drawbridge Operation Regulation; Bear Creek, Dundalk, MD... highway bridge at Wise Avenue across Bear Creek, mile 3.4, between Dundalk and Sparrows Point, MD....

  9. Mechanical design problems associated with turbopump fluid film bearings

    Science.gov (United States)

    Evces, Charles R.

    1990-01-01

    Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

  10. Analyzing the use of pins in safety bearings

    DEFF Research Database (Denmark)

    da Fonseca, Cesar A. L. L.; Weber, Hans I.; Fleischer, Philip F.;

    2015-01-01

    A new concept for safety bearings is analyzed: useful in emergency situations, it shall protect the bearing from destruction by the use of pins which impact with a disc, both capable of good energy dissipation. Results of work in progress are presented by validating partial stages of the...... the bearing....

  11. Ex vivo lung graft perfusion.

    Science.gov (United States)

    Briot, Raphaël; Gennai, Stéphane; Maignan, Maxime; Souilamas, Redha; Pison, Christophe

    2016-04-01

    This review proposes an update of the state of the art and the ongoing clinical trials of ex vivo lung perfusion for lung transplantation in patients. Ex vivo lung perfusion techniques (EVLP) can be used to evaluate a lung graft outside of the body. The goal of EVLP is to study the functional status of lung grafts that were first rejected for transplantation because they did not match all criteria for a conventional transplantation. After an EVLP evaluation, some of these lungs may be requalified for a possible transplantation in patients. This article proposes an overview of the developments of EVLP techniques. During EVLP, the perfusion and ventilation of the isolated lung preparation are very progressive in order to avoid oedema due to ischaemia-reperfusion injuries. Lung evaluation is mainly based on gasometric (PaO2/FiO2) and rheological criteria (low pulmonary arterial resistance). Several series of patients transplanted with EVLP evaluated lungs have been recently published with promising results. EVLP preparations also allow a better understanding of the physiopathology and treatments of ischaemia-reperfusion injuries. Organ procurements from "non-heart-beating" donors will probably require a wider application of these ex vivo techniques. The development of semi-automated systems might facilitate the clinical use of EVLP techniques. PMID:26746565

  12. Advances in lung cancer surgery

    Directory of Open Access Journals (Sweden)

    Mark W Hennon

    2012-01-01

    Full Text Available The last few years have witnessed an explosion of the use of minimally invasive techniques for the detection, diagnosis, and treatment of all stages of lung cancer. The use of these techniques has improved the risk-benefit ratio of surgery and has made it more acceptable to patients considering lung surgery. They have also facilitated the delivery of multi-modality therapy to patients with advanced lung cancer. This review article summarizes current surgical techniques that represent the "cutting edge" of thoracic surgery for lung cancer.

  13. [Farmer's lung antigens in Germany].

    Science.gov (United States)

    Sennekamp, J; Joest, M; Sander, I; Engelhart, S; Raulf-Heimsoth, M

    2012-05-01

    Recent studies suggest that besides the long-known farmer's lung antigen sources Saccharopolyspora rectivirgula (Micropolyspora faeni), Thermoactinomyces vulgaris, and Aspergillus fumigatus, additionally the mold Absidia (Lichtheimia) corymbifera as well as the bacteria Erwinia herbicola (Pantoea agglomerans) and Streptomyces albus may cause farmer's lung in Germany. In this study the sera of 64 farmers with a suspicion of farmer's lung were examined for the following further antigens: Wallemia sebi, Cladosporium herbarum, Aspergillus versicolor, and Eurotium amstelodami. Our results indicate that these molds are not frequent causes of farmer's lung in Germany. PMID:22477566

  14. Diagnostic Imaging of Lung Cancer

    OpenAIRE

    Kemal Kara; Ersin Ozturk

    2012-01-01

    Lung cancer is the most common cause of cancer related death in men and women. It is frequently seen among men than in women and male-female ratio is 1.5:1. Common epidemiological factors that increase risk of lung cancer is smoking. Early age to start smoking, high number of smoking cigarettes per a day and depth of inhalation increase risk of lung cancer. 25% of patients with lung cancer are nonsmokers that passively exposed to cigarette smoke. Occupational exposure to substances such as as...

  15. LUNG CANCER AND PULMONARY THROMBOEMBOLISM

    OpenAIRE

    Cukic, Vesna; Ustamujic, Aida

    2015-01-01

    Introduction: Malignant diseases including lung cancer are the risk for development of pulmonary thromboembolism (PTE). Objective: To show the number of PTE in patients with lung cancer treated in Clinic for pulmonary diseases and TB “Podhrastovi” in three-year period: from 2012-2014. Material and methods: This is the retrospective study in which we present the number of various types of lung cancer treated in three-year period, number and per cent of PTE in different types of lung carcinoma,...

  16. Bearing pad to pressure tube contact simulation

    International Nuclear Information System (INIS)

    Thermal creep strain deformation is a very important pressure tube failure mechanism. During a postulated LOCA (loss of coolant accident) with failure of emergency core injection sys- tem (ECIS), the fuel cladding temperature rapidly increases and the pressure tube becomes completely dry in a few seconds after flow stagnation occurs. Subsequently, the pressure tube circumference is heated by thermal radiation except at the spots where the bearing pads are in direct contact with the pressure tube. Therefore, the localized hot spots are developed on the pressure tube's inner surface under the bearing pads. The main objective of this paper is to evaluate the local thermal-mechanical deformation of a pressure tube in a CANDU reactor and to investigate the fuel channel integrity under localized contact between bearing pad and pressure tube. Furthermore, the mechanistic models are validated against the experimental works per- formed at WRL (Whiteshell research laboratory). Calculations are performed using the finite element method in which the heat, thermal mechanical and creep strain equations are solved, simultaneously. According to the experimental set up, the heat conduction from bearing pads to the inner surface of the pressure tube with appropriate convective and radiation boundary conditions has been simulated. Furthermore, the thermal creep strain deformation has been obtained for when the pressure tube is still under operational condition. It is observed that the pressure tube thermal strain will occur if sufficient high temperature is reached however, depending on the severity of flow degradation in the fuel channel, these localized hot spots could represent a potential creep strain failure of the pressure tube. Whether the pressure tube would fail at these hot spots before contacting the calandria tube depends on the localized temperature and experienced pressure transients. Sensitivity analysis is performed in order to evaluate the contact conductance, the

  17. Motion of rotor supported on aerodynamic bearings

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Šimek, J.; Kozánek, Jan

    Praha : Institute of Thermomechanics AS CR, v. v. i., 2007 - (Zolotarev, I.), s. 235-236 ISBN 978-80-87012-06-2. [Engineering Mechanics 2007: national conference with international participation. Svratka (CZ), 14.05.2007-17.05.2007] R&D Projects: GA ČR GA101/06/1787 Institutional research plan: CEZ:AV0Z20760514 Keywords : rotor dynamics * aerodynamic bearing * tilting pad s Subject RIV: BI - Acoustics

  18. Mutual interaction of two aerodynamic bearings

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Kozánek, Jan

    Lodz : Department of Automatics and Biomechanics Technical University of Lodz, 2007, s. 387-394. ISBN 978-83-924382-9-8. [Conference on Dynamical Systems - Theory and Applications /9./. Lodz (PL), 17.12.2007-20.12.2007] R&D Projects: GA ČR GA101/06/1787 Institutional research plan: CEZ:AV0Z20760514 Keywords : aerodynamic bearing * evolutive systems * numerical solution Subject RIV: BI - Acoustics

  19. Sensorless Control of Axial Magnetic Bearings

    Science.gov (United States)

    Atsumo, Daichi; Yoshida, Toshiya; Ohniwa, Katsumi

    This paper describes a sensorless control method of axial active magnetic bearings (AMBs). At high frequencies, inductance of the axial electromagnets is hardly dependent on the airgap because of the eddy current effects of the non-laminated core. Therefore the carrier frequency should be 3 kHz below to improve the sensitivity to the airgap. In the experiment, Sensorless controll of the axial AMBs have been achieved.

  20. Existence of equilibria in articulated bearings

    Science.gov (United States)

    Buscaglia, G.; Ciuperca, I.; Hafidi, I.; Jai, M.

    2007-04-01

    The existence of equilibrium solutions for a lubricated system consisting of an articulated body sliding over a flat plate is considered. Though this configuration is very common (it corresponds to the popular tilting-pad thrust bearings), the existence problem has only been addressed in extremely simplified cases, such as planar sliders of infinite width. Our results show the existence of at least one equilibrium for a quite general class of (nonplanar) slider shapes. We also extend previous results concerning planar sliders.

  1. Determinattion of aerostatic journal bearing dynamic properties

    Czech Academy of Sciences Publication Activity Database

    Kozánek, Jan; Šimek, J.; Steinbauer, P.; Neusser, Z.

    Praha: Ústav termomechaniky AV ČR, v. v. i., 2008 - (Pešek, L.), s. 161-168 ISBN 978-80-87012-10-9. [Dynamika strojů 2008. Praha (CZ), 05.02.2008-06.02.2008] R&D Projects: GA ČR GA101/06/1787 Institutional research plan: CEZ:AV0Z20760514 Keywords : aerostatic bearing * stiffness and damping coefficients * identification Subject RIV: BI - Acoustics

  2. Low-Wear Ball-Bearing Separator

    Science.gov (United States)

    Hawkinson, Elden L.

    1991-01-01

    Proposed ball-bearing separator for use in cryogenic pump stronger and more resistant to wear. Consists of molded plastic-and-metal composite ring imbued with solid lubricant and containing embedded metal ring. Obtains combination of strength and lubricity. Before molding and machining, ring includes tooling portion for handling and indexing. Molded composite blend of PTFE and fluorinated ethylene/propylene (FEP) filled with brass and bronze powder and molybdenum disulfide powder.

  3. Friction and wear of HPSN bearing materials

    International Nuclear Information System (INIS)

    Silicon nitride-based ceramics are used as high-performance materials for roller bearings. Its low specific gravity (about one-third that of ball-bearing steel), retention of strength at high temperature and corrosion resistance make Si3N4 ideal for this application. The first study of hot-pressed silicon nitride (HPSN) was made by Baumgartner. Later works were reviewed by Cranmer. Most previous work was related to the evaluation of HPSN in contact with itself. In this paper, the authors present work on wear and friction of HPSN and its composites in contact with ball-bearing steel. HPSN was made by sintering a nitrogen-rich Si3N4 liquid phase. The effect of sintering aids on the wear behavior of HPSN and its composites was investigated. The composites were made by adding either a high-temperature lubricating material, e.g., hexagonal boron nitride (BN) or harder particulates, e.g., titanium carbide (TiC)

  4. Concurrent Initialization for Bearing-Only SLAM

    Directory of Open Access Journals (Sweden)

    Antoni Grau

    2010-03-01

    Full Text Available Simultaneous Localization and Mapping (SLAM is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors have a large impact on the algorithm used for SLAM. Early SLAM approaches focused on the use of range sensors as sonar rings or lasers. However, cameras have become more and more used, because they yield a lot of information and are well adapted for embedded systems: they are light, cheap and power saving. Unlike range sensors which provide range and angular information, a camera is a projective sensor which measures the bearing of images features. Therefore depth information (range cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features system-initialization in order to enable the use of bearing sensors (as cameras in SLAM systems. In this work a novel and robust method, called Concurrent Initialization, is presented which is inspired by having the complementary advantages of the Undelayed and Delayed methods that represent the most common approaches for addressing the problem. The key is to use concurrently two kinds of feature representations for both undelayed and delayed stages of the estimation. The simulations results show that the proposed method surpasses the performance of previous schemes.

  5. Concurrent initialization for Bearing-Only SLAM.

    Science.gov (United States)

    Munguía, Rodrigo; Grau, Antoni

    2010-01-01

    Simultaneous Localization and Mapping (SLAM) is perhaps the most fundamental problem to solve in robotics in order to build truly autonomous mobile robots. The sensors have a large impact on the algorithm used for SLAM. Early SLAM approaches focused on the use of range sensors as sonar rings or lasers. However, cameras have become more and more used, because they yield a lot of information and are well adapted for embedded systems: they are light, cheap and power saving. Unlike range sensors which provide range and angular information, a camera is a projective sensor which measures the bearing of images features. Therefore depth information (range) cannot be obtained in a single step. This fact has propitiated the emergence of a new family of SLAM algorithms: the Bearing-Only SLAM methods, which mainly rely in especial techniques for features system-initialization in order to enable the use of bearing sensors (as cameras) in SLAM systems. In this work a novel and robust method, called Concurrent Initialization, is presented which is inspired by having the complementary advantages of the Undelayed and Delayed methods that represent the most common approaches for addressing the problem. The key is to use concurrently two kinds of feature representations for both undelayed and delayed stages of the estimation. The simulations results show that the proposed method surpasses the performance of previous schemes. PMID:22294884

  6. How Many Ore-Bearing Asteroids?

    CERN Document Server

    Elvis, Martin

    2013-01-01

    A simple formalism is presented to assess how many asteroids contain ore, i.e. commercially profitable material, and not merely a high concentration of a resource. I apply this formalism to two resource cases: platinum group metals (PGMs) and water. Assuming for now that only Ni-Fe asteroids are of interest for PGMs, then 1% of NEOs are rich in PGMs. The dearth of ultra-low delta-v (= US$1 B and the population of near-Earth objects (NEOs) larger than 100 m diameter is ~20,000 (Mainzer et al. 2011) the total population of PGM ore-bearing NEOs is roughly 10. I stress that this is a conservative and highly uncertain value. For example, an order of magnitude increase in PGM ore-bearing NEOs occurs if delta-v can as large as 5.7 km s-1. Water ore for utilization in space is likely to be found in ~1/1100 NEOs. NEOs as small as 18 m diameter can be water-ore-bodies because of the high richness of water (~20%) expected in ~25% of carbonaceous asteroids, bringing the number of water-ore-bearing NEOs to ~9000 out of th...

  7. Hydrolyzable polyureas bearing hindered urea bonds.

    Science.gov (United States)

    Ying, Hanze; Cheng, Jianjun

    2014-12-10

    Hydrolyzable polymers are widely used materials that have found numerous applications in biomedical, agricultural, plastic, and packaging industrials. They usually contain ester and other hydrolyzable bonds, such as anhydride, acetal, ketal, or imine, in their backbone structures. Here, we report the first design of hydrolyzable polyureas bearing dynamic hindered urea bonds (HUBs) that can reversibly dissociate to bulky amines and isocyanates, the latter of which can be further hydrolyzed by water, driving the equilibrium to facilitate the degradation of polyureas. Polyureas bearing 1-tert-butyl-1-ethylurea bonds that show high dynamicity (high bond dissociation rate), in the form of either linear polymers or cross-linked gels, can be completely degraded by water under mild conditions. Given the simplicity and low cost for the production of polyureas by simply mixing multifunctional bulky amines and isocyanates, the versatility of the structures, and the tunability of the degradation profiles of HUB-bearing polyureas, these materials are potentially of very broad applications. PMID:25406025

  8. AN INVESTIGATION OF MAGNETIC BEARING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Gürcan SAMTAŞ

    2007-02-01

    Full Text Available The magnetic bearing consists of levitating a shaft so that it is free to rotate about its axis. The magnetic bearing has the advantages of being very quiet work and very cleanliness because there is no mechanical friction or lubricants. The shaft has two permanent magnets attached to it. These two magnets determine a straight line rotation axis of the rotor shaft. The magnets are radially levitated and centered within a cavity by a passive permanent magnetic field in the adding stator housing assembly. The levitation and centering of the shaft axially is stabilized by a closed loop electronic servo circuit that regulates an electromagnetic field in the stator housing that pushes and pulls on the shaft magnets. The rotor weight can be between one gram and forty five thousand, four hundred grams. In 1985, the first magnetic bearing was developed that it had used to applications of gas turbines and other compressors. In these days, they can be used by many applications which are Medical, Transportation, Machine and Tools Industry, Aerospace, Vacuum and Clean room Environments... etc.

  9. Conservation of brown bear in the Alps: space use and settlement behavior of reintroduced bears

    Science.gov (United States)

    Preatoni, Damiano; Mustoni, Andrea; Martinoli, Adriano; Carlini, Eugenio; Chiarenzi, Barbara; Chiozzini, Simonetta; Van Dongen, Stefan; Wauters, Luc A.; Tosi, Guido

    2005-11-01

    Large carnivores typically need large home ranges containing habitats patches of different quality. Consequently, their conservation requires habitat protection and management at the landscape scale. In some cases, reintroduction might be used to support remnant or restore extinct populations. This is the case for the brown bear ( Ursus arctos) in the Italian Alps. We monitored spacing behavior and settlement of reintroduced brown bears in Adamello-Brenta Natural Park, North-Italy, using radio-tracking. Habitat use, dispersion and survival were studied to evaluate the success of reintroduction and possible conflicts with man. All three males and five of seven females settled in the study area. Most bears roamed widely the first months after release, exploring the new habitat. Patterns of home range overlap between seasons and years revealed that home range use stabilized the year after first hibernation. Home ranges were larger in the mating season (May-July) than in spring or autumn. Home ranges varied between 34 and 1813 km 2 the year after release, but core-areas, where feeding activity was concentrated, were much smaller. Some bears had exclusive core-areas in summer and autumn, but most showed considerable core-area overlap with animals of the same and/or the opposite sex. Bears selected deciduous forests, mixed and conifer forests were used according to availability, and areas with anthropogenic disturbance were avoided. Most bears settled and some reproduced successfully at the release site, causing high initial population growth, suggesting that reintroduction can help to re-establish a brown bear population in the Italian Alps.

  10. Inhalation treatment of lung cancer:the inlfuence of composition, size and shape of nanocarriers on their lung accumulation and retention

    Institute of Scientific and Technical Information of China (English)

    Olga B.Garbuzenko; Gediminas Mainelis; Oleh Taratula; Tamara Minko

    2014-01-01

    Objective:Various nanoparticles have been designed and tested in order to select optimal carriers for the inhalation delivery of anticancer drugs to the lungs. Methods:hTe following nanocarriers were studied:micelles, liposomes, mesoporous silica nanoparticles (MSNs), poly propyleneimine (PPI) dendrimer-siRNA complexes nanoparticles, quantum dots (QDs), and poly (ethylene glycol) polymers. All particles were characterized using the following methods:dynamic light scattering, zeta potential, atomic force microscopy, in vitro cyto-and genotoxicity. In vivo organ distribution of all nanoparticles, retention in the lungs, and anticancer effects of liposomes loaded with doxorubicin were examined in nude mice atfer the pulmonary or intravenous delivery. Results:Signiifcant differences in lung uptake were found atfer the inhalation delivery of lipid-based and non-lipid-based nanoparticles. hTe accumulation of liposomes and micelles in lungs remained relatively high even 24 h atfer inhalation when compared with MSNs, QDs, and PPI dendrimers. hTere were notable differences between nanoparticle accumulation in the lungs and other organs 1 and 3 h atfer inhalation or intravenous administrations, but 24 h atfer intravenous injection all nanoparticles were mainly accumulated in the liver, kidneys, and spleen. Inhalation delivery of doxorubicin by liposomes signiifcantly enhanced its anticancer effect and prevented severe adverse side effects of the treatment in mice bearing the orthotopic model of lung cancer. Conclusion:hTe results of the study demonstrate that lipid-based nanocarriers had considerably higher accumulation and longer retention time in the lungs when compared with non-lipid-based carriers atfer the inhalation delivery. hTese particles are most suitable for effective inhalation treatment of lung cancer.

  11. Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

    Science.gov (United States)

    Mukesh; Sharma, Lalit Kumar; Charoo, Samina Amin; Sathyakumar, Sambandam

    2015-01-01

    The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears) returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape. PMID:26267280

  12. Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

    Directory of Open Access Journals (Sweden)

    Mukesh

    Full Text Available The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape.

  13. General Information about Small Cell Lung Cancer

    Science.gov (United States)

    ... Cancer Prevention Lung Cancer Screening Research Small Cell Lung Cancer Treatment (PDQ®)–Patient Version General Information About Small Cell Lung Cancer Go to Health Professional Version Key Points Small ...

  14. Stages of Small Cell Lung Cancer

    Science.gov (United States)

    ... Cancer Prevention Lung Cancer Screening Research Small Cell Lung Cancer Treatment (PDQ®)–Patient Version General Information About Small Cell Lung Cancer Go to Health Professional Version Key Points Small ...

  15. Treatment Option Overview (Small Cell Lung Cancer)

    Science.gov (United States)

    ... Cancer Prevention Lung Cancer Screening Research Small Cell Lung Cancer Treatment (PDQ®)–Patient Version General Information About Small Cell Lung Cancer Go to Health Professional Version Key Points Small ...

  16. Lung Cancer Rates by Race and Ethnicity

    Science.gov (United States)

    ... HPV-Associated Ovarian Prostate Skin Uterine Cancer Home Lung Cancer Rates by Race and Ethnicity Language: English Español ( ... Tweet Share Compartir The rate of people getting lung cancer or dying from lung cancer varies by race ...

  17. Lung Cancer Surgery Worthwhile for Older Patients

    Science.gov (United States)

    ... nlm.nih.gov/medlineplus/news/fullstory_158689.html Lung Cancer Surgery Worthwhile for Older Patients Study found those ... 2016 THURSDAY, May 5, 2016 (HealthDay News) -- Older lung cancer patients are surviving longer when they have lung ...

  18. Lung Cancer and Hispanics: Know the Facts

    Science.gov (United States)

    ... cause among Hispanic women. November is Lung Cancer Awareness Month, a good time to separate myth from fact when it comes to lung cancer. So what are the facts?  Smoking is the primary cause of lung cancer. Not ...

  19. What Are Asbestos-Related Lung Diseases?

    Science.gov (United States)

    ... page from the NHLBI on Twitter. What Are Asbestos-Related Lung Diseases? Asbestos-related lung diseases are ... as the peritoneum (PER-ih-to-NE-um). Asbestos-Related Lung Diseases Figure A shows the location ...

  20. Anti-tumor activity of CpG-ODN aerosol in mouse lung metastases.

    Science.gov (United States)

    Sfondrini, Lucia; Sommariva, Michele; Tortoreto, Monica; Meini, Alessandra; Piconese, Silvia; Calvaruso, Marco; Van Rooijen, Nick; Bonecchi, Raffaella; Zaffaroni, Nadia; Colombo, Mario P; Tagliabue, Elda; Balsari, Andrea

    2013-07-15

    Studies in preclinical models have demonstrated the superior anti-tumor effect of CpG oligodeoxynucleotides (CpG-ODN) when administered at the tumor site rather than systemically. We evaluated the effect of aerosolized CpG-ODN on lung metastases in mice injected with immunogenic N202.1A mammary carcinoma cells or weakly immunogenic B16 melanoma cells. Upon reaching the bronchoalveolar space, aerosolized CpG-ODN activated a local immune response, as indicated by production of IL-12p40, IFN-γ and IL-1β and by recruitment and maturation of DC cells in bronchoalveolar lavage fluid of mice. Treatment with aerosolized CpG-ODN induced an expansion of CD4+ cells in lung and was more efficacious than systemic i.p. administration against experimental lung metastases of immunogenic N202.1A mammary carcinoma cells, whereas only i.p. delivery of CpG-ODN provided anti-tumor activity, which correlated with NK cell expansion in the lung, against lung metastases of the poorly immunogenic B16 melanoma. The inefficacy of aerosol therapy to induce NK expansion was related to the presence of immunosuppressive macrophages in B16 tumor-bearing lungs, as mice depleted of these cells by clodronate treatment responded to aerosol CpG-ODN through expansion of the NK cell population and significantly reduced numbers of lung metastases. Our results indicate that tumor immunogenicity and the tumor-induced immunosuppressive environment are critical factors to the success of CpG therapy in the lung, and point to the value of routine sampling of the lung immune environment in defining an optimal immunotherapeutic strategy. PMID:23319306