WorldWideScience

Sample records for bearing minor amounts

  1. Melanite garnet-bearing nepheline syenite minor intrusion in ...

    Indian Academy of Sciences (India)

    (Chattopadhyay and Hashmi 1984; Maitra 1992;. Srivastava et al 2005; Srivastava ... Keywords. Melanite garnet; nepheline syenite minor intrusion; Mesozoic magmatism; Mawpyut complex; Meghalaya plateau. J. Earth Syst. Sci. 120, No. 6, December 2011, pp. ... dated 110–120 Ma (Coffin et al 2002; Srivastava et al 2005).

  2. Determination of maximal amount of minor gases adsorbed in a shale sample by headspace gas chromatography.

    Science.gov (United States)

    Zhang, Chun-Yun; Hu, Hui-Chao; Chai, Xin-Sheng; Pan, Lei; Xiao, Xian-Ming

    2014-02-07

    In this paper, we present a novel method for determining the maximal amount of ethane, a minor gas species, adsorbed in a shale sample. The method is based on the time-dependent release of ethane from shale samples measured by headspace gas chromatography (HS-GC). The study includes a mathematical model for fitting the experimental data, calculating the maximal amount gas adsorbed, and predicting results at other temperatures. The method is a more efficient alternative to the isothermal adsorption method that is in widespread use today. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Assessment of the amount of polar bears ( Ursus maritimus) on the basis of perennial vessel counts

    Science.gov (United States)

    Matishov, G. G.; Chelintsev, N. G.; Goryaev, Yu. I.; Makarevich, P. R.; Ishkulov, D. G.

    2014-10-01

    This article presents a method of assessment of the amount of polar bears on the basis of data on vessel counts. The results of 32 vessel transect counts in the southern part of the Kara Sea are used as the primary data. They are processed in an original program using separate extrapolation by sectors and summarizing of data of several different counts. In recent years, the calculated amount of bears in the studied region has varied from 3300 to 3100 individuals (3200, on average). The relative statistical error of estimations smoothly decreases from 8 to 7%. The confidence interval of the estimation at statistical error of 7% and probability level of 95% is 2700-3500 individuals.

  4. Detection of minor amounts of irradiated constituents in a complex, processed food matrix

    International Nuclear Information System (INIS)

    Marchioni, E.

    1999-01-01

    Food irradiation is a process applied by the food processing industry for spoiling bacteria in ingredients added to non-irradiated food. The paper describes a method for detection of even very small amounts of irradiated ingredients in food, such as irradiated spices (down to 0.1% m/m), separator chicken meat (2% m/m), or chopped salmon (14% m/m). (orig./CB) [de

  5. Two-dimensional preparative liquid chromatography system for preparative separation of minor amount components from complicated natural products

    International Nuclear Information System (INIS)

    Qiu, Ying-Kun; Chen, Fang-Fang; Zhang, Ling-Ling; Yan, Xia; Chen, Lin; Fang, Mei-Juan; Wu, Zhen

    2014-01-01

    Highlights: • Preparative MDLC system was developed for separation of complicated natural products. • Medium-pressure LC and preparative HPLC were connected by interface of SPE. • Automated multi-step preparative separation of 25 compounds was achieved by using this system. - Abstract: An on-line comprehensive two-dimensional preparative liquid chromatography system was developed for preparative separation of minor amount components from complicated natural products. Medium-pressure liquid chromatograph (MPLC) was applied as the first dimension and preparative HPLC as the second one, in conjunction with trapping column and makeup pump. The performance of the trapping column was evaluated, in terms of column size, dilution ratio and diameter-height ratio, as well as system pressure from the view of medium pressure liquid chromatograph. Satisfactory trapping efficiency can be achieved using a commercially available 15 mm × 30 mm i.d. ODS pre-column. The instrument operation and the performance of this MPLC × preparative HPLC system were illustrated by gram-scale isolation of crude macro-porous resin enriched water extract of Rheum hotaoense. Automated multi-step preparative separation of 25 compounds, whose structures were identified by MS, 1 H NMR and even by less-sensitive 13 C NMR, could be achieved in a short period of time using this system, exhibiting great advantages in analytical efficiency and sample treatment capacity compared with conventional methods

  6. Characterisation of quartz and pyrite in Witwatersrand gold-bearing conglomerates by minor and trace elements

    International Nuclear Information System (INIS)

    Kable, E.J.D.

    1983-01-01

    An understanding of the distribution and concentration of gold within the Witwatersrand conglomerate reefs is of fundamental importance to the gold mining industry. The ability to finger print goldbearing reefs would have an important bearing on mine planning and the development of new methods of mining. From sedimentological studies it is possible to establish the environment in which deposition of gold and associated minerals took place. However, it is not possible to identify sources supplying detrital material on account of the nature of the preserved conglomerates. One possible way of overcoming this problem is to geochemically characterise those detrital minerals associated with the gold. As quartz and pyrite are predominant components of the reef, they are ideal for such a study. In this paper it is demonstrated that detrital pyrite and quartz have specific geochemical signatures which may be used to characterise individual reefs. Furthermore, evidence is provided of the presence of more than one population of detrital components within reefs such as the Ventersdorp Contact Reef and the Steyn Reef. The recognition of different detrital components suggests that a number of source areas were responsible for providing the detritus to the Witwatersrand basin

  7. Minor amounts of plasma medium-chain fatty acids and no improved time trial performance after consuming lipids

    DEFF Research Database (Denmark)

    Vistisen, Bodil; Nybo, L.; Xu, Xuebing

    2003-01-01

    :0 was detected in the plasma lipid classes, but the amount of phospholipid fatty acids was significantly higher after CHO+MLM compared with CHO intake. The lacking time trial improvement after intake of medium-chain fatty acids might be due to no available 8:0 in the systemic circulation. A higher level......Medium-chain triacylglycerols (MCT) have a potential glycogen-saving effect during exercise due to rapid hydrolysis and oxidation. However, studies comparing intake of carbohydrates (CHO) plus 80-90 g MCT with intake of CHO alone have revealed different results. The present study tested performance......% of maximum 02 uptake during which they ingested CHO or CHO plus specific structured triacylglycerols. Immediately after the constant-load cycling, the subjects performed a time trial of similar to50-min duration. Breath and blood samples were obtained regularly during the experiment. Fatty acid composition...

  8. PIXE micro-mapping of minor elements in Hypatia, a diamond bearing carbonaceous stone from the Libyan Desert Glass area, Egypt: Inheritance from a cold molecular cloud?

    International Nuclear Information System (INIS)

    Andreoli, M.A.G.; Przybylowicz, W.J.; Kramers, J.; Belyanin, G.; Westraadt, J.; Bamford, M.; Mesjasz-Przybylowicz, J.; Venter, A.

    2015-01-01

    Matter originating from space, particularly if it represents rare meteorite samples, is ideally suited to be studied by Particle Induced X-ray Emission (PIXE) as this analytical technique covers a broad range of trace elements and is per se non-destructive. We describe and interpret a set of micro-PIXE elemental maps obtained on two minute (weighing about 25 and 150 mg), highly polished fragments taken from Hypatia, a controversial, diamond-bearing carbonaceous pebble from the SW Egyptian desert. PIXE data show that Hypatia is chemically heterogeneous, with significant amounts of primordial S, Cl, P and at least 10 elements with Z > 21 (Ti, V, Cr, Mn, Fe, Ni, Os, Ir) locally attaining concentrations above 500 ppm. Si, Al, Ca, K, O also occur, but are predominantly confined to cracks and likely represent contamination from the desert environment. Unusual in the stone is poor correlation between elements within the chalcophile (S vs. Cu, Zn) and siderophile (i.e.: Fe vs. Ni, Ir, Os) groups, whereas other siderophiles (Mn, Mo and the Platinum group elements (PGEs)) mimic the distribution of lithophile elements such as Cr and V. Worthy of mention is also the presence of a globular domain (Ø ∼ 120 μm) that is C and metals-depleted, yet Cl (P)-enriched (>3 wt.% and 0.15 wt.% respectively). While the host of the Cl remains undetermined, this chemical unit is enclosed within a broader domain that is similarly C-poor, yet Cr–Ir rich (up to 1.2 and 0.3 wt.% respectively). Our data suggest that the pebble consists of shock-compacted, primitive carbonaceous material enriched in cold, pre-solar dust.

  9. PIXE micro-mapping of minor elements in Hypatia, a diamond bearing carbonaceous stone from the Libyan Desert Glass area, Egypt: Inheritance from a cold molecular cloud?

    Energy Technology Data Exchange (ETDEWEB)

    Andreoli, M.A.G., E-mail: marco.andreoli@wits.ac.za [School of Geosciences, University of the Witwatersrand, P.O. Box 3, Wits 2050 (South Africa); Przybylowicz, W.J. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); AGH University of Science and Technology, Faculty of Physics & Applied Computer Science, al. A. Mickiewicza 30, 30-059 Kraków (Poland); Kramers, J.; Belyanin, G. [Department of Geology, University of Johannesburg, Auckland Park 2006 (South Africa); Westraadt, J. [Department of Physics, Nelson Mandela Metropolitan University, Port Elizabeth 6031 (South Africa); Bamford, M. [Evolutionary Studies Institute, University of the Witwatersrand, P.O. Box 3, Wits 2050 (South Africa); Mesjasz-Przybylowicz, J. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); Venter, A. [South African Nuclear Energy Corporation, P.O. Box 582, Pretoria 0001 (South Africa)

    2015-11-15

    Matter originating from space, particularly if it represents rare meteorite samples, is ideally suited to be studied by Particle Induced X-ray Emission (PIXE) as this analytical technique covers a broad range of trace elements and is per se non-destructive. We describe and interpret a set of micro-PIXE elemental maps obtained on two minute (weighing about 25 and 150 mg), highly polished fragments taken from Hypatia, a controversial, diamond-bearing carbonaceous pebble from the SW Egyptian desert. PIXE data show that Hypatia is chemically heterogeneous, with significant amounts of primordial S, Cl, P and at least 10 elements with Z > 21 (Ti, V, Cr, Mn, Fe, Ni, Os, Ir) locally attaining concentrations above 500 ppm. Si, Al, Ca, K, O also occur, but are predominantly confined to cracks and likely represent contamination from the desert environment. Unusual in the stone is poor correlation between elements within the chalcophile (S vs. Cu, Zn) and siderophile (i.e.: Fe vs. Ni, Ir, Os) groups, whereas other siderophiles (Mn, Mo and the Platinum group elements (PGEs)) mimic the distribution of lithophile elements such as Cr and V. Worthy of mention is also the presence of a globular domain (Ø ∼ 120 μm) that is C and metals-depleted, yet Cl (P)-enriched (>3 wt.% and 0.15 wt.% respectively). While the host of the Cl remains undetermined, this chemical unit is enclosed within a broader domain that is similarly C-poor, yet Cr–Ir rich (up to 1.2 and 0.3 wt.% respectively). Our data suggest that the pebble consists of shock-compacted, primitive carbonaceous material enriched in cold, pre-solar dust.

  10. PIXE micro-mapping of minor elements in Hypatia, a diamond bearing carbonaceous stone from the Libyan Desert Glass area, Egypt: Inheritance from a cold molecular cloud?

    Science.gov (United States)

    Andreoli, M. A. G.; Przybylowicz, W. J.; Kramers, J.; Belyanin, G.; Westraadt, J.; Bamford, M.; Mesjasz-Przybylowicz, J.; Venter, A.

    2015-11-01

    Matter originating from space, particularly if it represents rare meteorite samples, is ideally suited to be studied by Particle Induced X-ray Emission (PIXE) as this analytical technique covers a broad range of trace elements and is per se non-destructive. We describe and interpret a set of micro-PIXE elemental maps obtained on two minute (weighing about 25 and 150 mg), highly polished fragments taken from Hypatia, a controversial, diamond-bearing carbonaceous pebble from the SW Egyptian desert. PIXE data show that Hypatia is chemically heterogeneous, with significant amounts of primordial S, Cl, P and at least 10 elements with Z > 21 (Ti, V, Cr, Mn, Fe, Ni, Os, Ir) locally attaining concentrations above 500 ppm. Si, Al, Ca, K, O also occur, but are predominantly confined to cracks and likely represent contamination from the desert environment. Unusual in the stone is poor correlation between elements within the chalcophile (S vs. Cu, Zn) and siderophile (i.e.: Fe vs. Ni, Ir, Os) groups, whereas other siderophiles (Mn, Mo and the Platinum group elements (PGEs)) mimic the distribution of lithophile elements such as Cr and V. Worthy of mention is also the presence of a globular domain (Ø ∼ 120 μm) that is C and metals-depleted, yet Cl (P)-enriched (>3 wt.% and 0.15 wt.% respectively). While the host of the Cl remains undetermined, this chemical unit is enclosed within a broader domain that is similarly C-poor, yet Cr-Ir rich (up to 1.2 and 0.3 wt.% respectively). Our data suggest that the pebble consists of shock-compacted, primitive carbonaceous material enriched in cold, pre-solar dust.

  11. Bearing system

    Science.gov (United States)

    Kapich, Davorin D.

    1987-01-01

    A bearing system includes backup bearings for supporting a rotating shaft upon failure of primary bearings. In the preferred embodiment, the backup bearings are rolling element bearings having their rolling elements disposed out of contact with their associated respective inner races during normal functioning of the primary bearings. Displacement detection sensors are provided for detecting displacement of the shaft upon failure of the primary bearings. Upon detection of the failure of the primary bearings, the rolling elements and inner races of the backup bearings are brought into mutual contact by axial displacement of the shaft.

  12. Autonomy and minority rights

    DEFF Research Database (Denmark)

    Barten, Ulrike

    2008-01-01

    in the cultural, educational, religious and social sectors which have of course are exercised in a limited territory; however, do not threaten the state's sovereignty in the same way as independent political decisions could do. How far minority rights have the same dimensions, will be another issue. Minorities......'? I will look at this in connection with minority rights, as minority rights accord special rights and procedures to a specific group. For example, minorities have sometimes far reaching competences in the educational field: setting up and running their own schools and to a certain degree also decide......, are they at odds with each other or do they possibly overlap? This last possibility would be that minority rights are so extensive that they actually amount to autonomy. Autonomy has a range of dimensions and one must distinguish between political autonomy which is largely territorial in nature and autonomy...

  13. Magnetic Bearing

    OpenAIRE

    Anbuselvan. T; Vinothkumar. K; Sai Vikash. M

    2013-01-01

    The use of bearings is essential to all types of machines, especially in marine aspects they provide the function of supporting heavier component in a desired position. These bearings have contact with the rotating part and causes surface wear which can be controlled by lubrication. Researches have raised the standards of performance for rotating equipment by providing robust, cost effective, easy to implement magnetic bearing solutions. Use of magnetic bearings in ships can be more advantag...

  14. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  15. GAS BEARING

    Science.gov (United States)

    Skarstrom, C.W.

    1960-09-01

    A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

  16. Thrust bearing

    Science.gov (United States)

    Anderson, W. J. (Inventor)

    1976-01-01

    A gas lubricated thrust bearing is described which employs relatively rigid inwardly cantilevered spokes carrying a relatively resilient annular member or annulus. This annulus acts as a beam on which are mounted bearing pads. The resilience of the beam mount causes the pads to accept the load and, with proper design, responds to a rotating thrust-transmitting collar by creating a gas film between the pads and the thrust collar. The bearing may be arranged for load equalization thereby avoiding the necessity of gimbal mounts or the like for the bearing. It may also be arranged to respond to rotation in one or both directions.

  17. Polar Bears

    Science.gov (United States)

    Amstrup, Steven C.; Douglas, David C.; Reynolds, Patricia E.; Rhode, E.B.

    2002-01-01

    Polar bears (Ursus maritimus) are hunted throughout most of their range. In addition to hunting polar bears of the Beaufort Sea region are exposed to mineral and petroleum extraction and related human activities such as shipping road-building, and seismic testing (Stirling 1990).Little was known at the start of this project about how polar bears move about in their environment, and although it was understood that many bears travel across political borders, the boundaries of populations had not been delineated (Amstrup 1986, Amstrup et al. 1986, Amstrup and DeMaster 1988, Garner et al. 1994, Amstrup 1995, Amstrup et al. 1995, Amstrup 2000).As human populations increase and demands for polar bears and other arctic resources escalate, managers must know the sizes and distributions of the polar bear populations. Resource managers also need reliable estimates of breeding rates, reproductive intervals, litter sizes, and survival of young and adults.Our objectives for this research were 1) to determine the seasonal and annual movements of polar bears in the Beaufort Sea, 2) to define the boundaries of the population(s) using this region, 3) to determine the size and status of the Beaufort Sea polar bear population, and 4) to establish reproduction and survival rates (Amstrup 2000).

  18. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  19. Minority Games

    International Nuclear Information System (INIS)

    Metzler, R

    2005-01-01

    New branches of scientific disciplines often have a few paradigmatic models that serve as a testing ground for theories and a starting point for new inquiries. In the late 1990s, one of these models found fertile ground in the growing field of econophysics: the Minority Game (MG), a model for speculative markets that combined conceptual simplicity with interesting emergent behaviour and challenging mathematics. The two basic ingredients were the minority mechanism (a large number of players have to choose one of two alternatives in each round, and the minority wins) and limited rationality (each player has a small set of decision rules, and chooses the more successful ones). Combining these, one observes a phase transition between a crowded and an inefficient market phase, fat-tailed price distributions at the transition, and many other nontrivial effects. Now, seven years after the first paper, three of the key players-Damien Challet, Matteo Marsili and Yi-Cheng Zhang-have published a monograph that summarizes the current state of the science. The book consists of two parts: a 100-page overview of the various aspects of the MG, and reprints of many essential papers. The first chapters of Part I give a well-written description of the motivation and the history behind the MG, and then go into the phenomenology and the mathematical treatment of the model. The authors emphasize the 'physics' underlying the behaviour and give coherent, intuitive explanations that are difficult to extract from the original papers. The mathematics is outlined, but calculations are not carried out in great detail (maybe they could have been included in an appendix). Chapter 4 then discusses how and why the MG is a model for speculative markets, how it can be modified to give a closer fit to observed market statistics (in particular, reproducing the 'stylized facts' of fat-tailed distributions and volatility clustering), and what conclusions one can draw from the behaviour of the MG when

  20. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  1. Bearing structures

    International Nuclear Information System (INIS)

    Lee, A.S.; Preece, G.E.

    1988-01-01

    A hydrostatic bearing for the lower end of the vertical shaft of a sodium pump comprises a support shell encircling the shaft and a bush located between the shell and shaft. Liquid sodium is fed from the pump outlet to the bush/shaft and bush/shell interfaces to provide hydrostatic support. The bush outer surface and the shell inner surface are of complementary part-spherical shape and the bush floats relative to the shaft so that the bush can align itself with the shaft axis. Monitoring of the relative rotational speed of the bush with respect to the shaft (such rotation being induced by the viscous drag forces present) is also performed for the purposes of detecting abnormal operation of the bearing or partial seizure, at least one magnet is rotatable with the bush, and a magnetic sensor provides an output having a frequency related to the speed of the bush. (author)

  2. Camshaft bearing arrangement

    Energy Technology Data Exchange (ETDEWEB)

    Aoi, K.; Ozawa, T.

    1986-06-10

    A bearing arrangement is described for the camshaft of an internal combustion engine or the like which camshaft is formed along its length in axial order with a first bearing surface, a first cam lobe, a second bearing surface, a second cam lobe, a third bearing surface, a third cam lobe and a fourth bearing surface, the improvement comprising first bearing means extending around substantially the full circumference of the first bearing surface and journaling the first bearing surface, second bearing means extending around substantially less than the circumference of the second bearing surface and journaling the second bearing surface, third bearing means extending around substantially less than the circumference of the third bearing surface and journaling the third bearing surface, and fourth bearing means extending around substantially the full circumference of the fourth bearing surface and journaling the first bearing surface.

  3. Radial Halbach Magnetic Bearings

    Science.gov (United States)

    Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

    2009-01-01

    minimizing it on the opposite side. The advantage of this configuration is that it makes it possible to approach the theoretical maximum force per unit area that could be exerted by a given amount of permanent-magnet material. The configuration is named after physicist Klaus Halbach, who conceived it for use in particle accelerators. Halbach arrays have also been studied for use in magnetic-levitation ("maglev") railroad trains. In a radial Halbach magnetic bearing, the basic Halbach arrangement is modified into a symmetrical arrangement of sector-shaped permanent magnets mounted on the outer cylindrical surface of a drum rotor (see Figure 2). The magnets are oriented to concentrate the magnetic field on their radially outermost surface. The stator coils are mounted in a stator shell surrounding the rotor.

  4. Bearing assemblies, apparatuses, and motor assemblies using the same

    Science.gov (United States)

    Sexton, Timothy N.; Cooley, Craig H.; Knuteson, Cody W.

    2015-12-29

    Various embodiments of the invention relate to bearing assemblies, apparatuses and motor assemblies that include geometric features configured to impart a selected amount of heat transfer and/or hydrodynamic film formation. In an embodiment, a bearing assembly may include a plurality of superhard bearing pads distributed circumferentially about an axis. At least some of the plurality of superhard bearing pads may include a plurality of sub-superhard bearing elements defining a bearing surface. At least some of the plurality of sub-superhard bearing elements may be spaced from one another by one or more voids to impart a selected amount of heat transfer and hydrodynamic film formation thereon during operation. The bearing assembly may also include a support ring that carries the plurality of superhard bearing pads. In addition, at least a portion of the sub-superhard bearing elements may extend beyond the support ring.

  5. Minorities and Language

    NARCIS (Netherlands)

    Gorter, D.

    2006-01-01

    The relationship between minorities and language is complicated and related to the development of nation-states. Language minorities, as a social group, are distinguished from minority languages. The definition of minority is problematic. The size of a minority can differ widely. For membership,

  6. Minority engineering scholarships, 2012.

    Science.gov (United States)

    2014-02-01

    Scholarships for Minority Students Studying Engineering and Science: Support will make scholarships available to minority students : interested in engineering and science and will increase significantly the number of minority students that Missouri S...

  7. General Mechanical Repair. Minor Automotive Maintenance. Volume 1. Teacher's Guide.

    Science.gov (United States)

    East Texas State Univ., Commerce. Occupational Curriculum Lab.

    Fourteen units on minor automotive maintenance are presented in this teacher's guide. The units are the following: introduction to minor automotive maintenance, shop safety, engine principles, fuel system operation and repair, electrical system, ignition system, lubrication system, engine cooling system, exhaust system, wheel bearings and tires,…

  8. Supporting minority nursing students: 'Opportunity for Success' for Ethiopian immigrants in Israel.

    Science.gov (United States)

    Arieli, D; Hirschfeld, M J

    2013-06-01

    To report on an Israeli academic nursing project, aimed at supporting the integration of Ethiopian immigrants into nursing studies. The representation of ethnic minorities within nursing is crucial for the provision of efficient care in diverse societies. Nevertheless, successful integration of minority students in nursing programs is not a simple task and needs developing support systems that will attract and retain students from minorities. Ethiopian Jewish immigrants and their descendants in Israel form a community of 120,000 people. Their participation in the national workforce is low, as well as their average income. The paper is based on formative evaluation, using action research, of an academic nursing program in Israel. Four main strategies identify this project: (1) a policy of institutional commitment, (2) personal relations with staff, (3) personal tutoring, and (4) cultural safety education. The project has reached success in terms of attraction, retention and students' satisfactions. The project's two main challenges, which need further concern, are: (1) giving support without labelling and (2) supporting without creating dependency. CONCLUSIONS AND INTERNATIONAL POLICY IMPLICATIONS: Appropriate strategies can enable success of minority students. Nevertheless, the amount of support needed for such programs raises two major questions: (1) To what extent should individual nursing departments be expected to bear solutions to this widely experienced problem? (2) How does focusing on one minority affect cultural safety of the overall group? © 2013 The Authors. International Nursing Review © 2013 International Council of Nurses.

  9. Passive magnetic bearing configurations

    Science.gov (United States)

    Post, Richard F [Walnut Creek, CA

    2011-01-25

    A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

  10. Improved gas thrust bearings

    Science.gov (United States)

    Anderson, W. J.; Etsion, I.

    1979-01-01

    Two variations of gas-lubricated thrust bearings extend substantially load-carrying range over existing gas bearings. Dual-Action Gas Thrust Bearing's load-carrying capacity is more than ninety percent greater than that of single-action bearing over range of compressibility numbers. Advantages of Cantilever-mounted Thrust Bearing are greater tolerance to dirt ingestion, good initial lift-off characteristics, and operational capability over wide temperature range.

  11. Melanite garnet-bearing nepheline syenite minor intrusion in ...

    Indian Academy of Sciences (India)

    (Chattopadhyay and Hashmi 1984; Maitra 1992;. Srivastava et al 2005; Srivastava and Sinha 2007a,. 2007b) and Samchampi igneous complex of Mikir. Hills (Nag et al 1999; Saha et al 2010) are worth mentioning. The Mawpyut ultramafic complex. (Maitra 1992; Maitra et al 2003) in Jaintia Hills of the Meghalaya plateau ...

  12. Experiments with needle bearings

    Science.gov (United States)

    Ferretti, Pericle

    1933-01-01

    Experiments and results are presented in testing needle bearings, especially in comparison with roller bearings. Reduction in coefficient of friction is discussed as well as experimental methods and recording devices.

  13. Correction of compressor critical speed condition through fluid-film bearing optimization

    International Nuclear Information System (INIS)

    Spencer, J.W.; Obeid, V.E.

    1985-01-01

    A critical speed condition for an overhung centrifugal compressor was corrected through a relatively minor bearing modification. The resonant condition was evaluated analytically through rotor dynamic analyses (stability and forced response) which included fluid film bearing characterization and rotor model generation (experimentally evaluated by model analysis). The importance of adequate specification, inspection, and analytical characterization, of fluid film bearings are discussed. The effects of unbalance on the stability of plain journal bearings are also commented upon. 1 ref., 6 figs

  14. Experimental and theoretical analysis of a rigid rotor supported by air foil bearings

    DEFF Research Database (Denmark)

    Larsen, Jon Steffen; Hansen, Asger J. T.; Santos, Ilmar

    2015-01-01

    The popularity of compressors utilizing foil bearings is increasing. Their mechanical design is challenging, and an accurate prediction of the bearing coefficients is important. A mathematical model taking into account the foil structure, and the detailed geometry of a three pad foil bearing are ...... for the first order equation. Calculated bearing coefficients are compared to experimental results obtained from a dedicated test rig. Generally, good agreement is observed and minor discrepancies for the damping coefficients are discussed....

  15. PIE analysis for minor actinide

    International Nuclear Information System (INIS)

    Suyama, Kenya

    2005-01-01

    Minor actinide (MA) is generated in nuclear fuel during the operation of power reactor. For fuel design, reactivity decrease due to it should be considered. Out of reactors, MA plays key role to define the property of spent fuel (SF) such as α-radioactivity, neutron emission rate, and criticality of SF. In order to evaluate the calculation codes and libraries for predicting the amount of MA, comparison between calculation results and experimentally obtained data has been conducted. In this report, we will present the status of PIE data of MA taken by post irradiation examinations (PIE) and several calculation results. (author)

  16. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... about their childhood teddy bears, and children's accounts of what they do with teddy bears, both written for school and told 'out of school', The chapter sees teddy bears as artefacts that provide a cultural channeling for the child's need of a transitional object and argues that the meanings of teddy...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  17. THE NATIONAL MINORITY CONSULTATIVE MECHANISMS - THE COUNCILS OF NATIONAL MINORITIES IN BOSNIA AND HERZEGOVINA

    Directory of Open Access Journals (Sweden)

    Aleksandar Čorni

    2016-09-01

    Full Text Available The article tries to explore the practical application of the soft law, in concrete terms, the documents adopted by the Organization for Security and Co-operation in Europe, referring to the models of participation of national minorities in public life in the case of Bosnia and Herzegovina. The objective of the research was to assess the legal and political grounds for functioning national minority councils as participation and consultative mechanisms, scope of responsibilities and capacities in relation to their effectiveness and impact and to identify relevant good practices on such mechanisms. The political and decision-making structures in Bosnia and Herzegovina demonstrated lack of actual commitment to the realization of the rights of minorities referring to participation in decision-making processes. Bearing in mind formal position within parliaments, visibility, and a significant promotional capacity for presence in the public sphere, the councils on national minorities may represent a significant body and channel for the minority – majority dialogue. However, at the moment, the national minority councils’ capacity to ensure participation of national minorities in Bosnian political life and their influence in decision-making process remains insufficient. In general, the consultative mechanisms, within their mandated responsibilities, have had insignificant and minimal impact on the practical, political and legislative segment.

  18. FIESTA; Minority Television Programming.

    Science.gov (United States)

    Marshall, Wes; And Others

    The suggestions for planning, running, and evaluating minority television programing presented in this handbook are based on the experience and example of the FIESTA project (Tucson, Arizona). After initiating the reader into the topic of minority programing, the document disucsses the following topics: broadcast research, origins of the FIESTA…

  19. Surveying ethnic minorities

    NARCIS (Netherlands)

    Joost Kappelhof

    2015-01-01

    Obtaining accurate survey data on ethnic minorities is not easy. Ethnic minorities are usually underrepresented in surveys, and it is moreover not certain that those who do take part in surveys are representative of the group the researcher is interested in. For example, is it only people with

  20. Bearings: Technology and needs

    Science.gov (United States)

    Anderson, W. J.

    1982-01-01

    A brief status report on bearing technology and present and near-term future problems that warrant research support is presented. For rolling element bearings a material with improved fracture toughness, life data in the low Lambda region, a comprehensive failure theory verified by life data and incorporated into dynamic analyses, and an improved corrosion resistant alloy are perceived as important needs. For hydrodynamic bearings better definition of cavitation boundaries and pressure distributions for squeeze film dampers, and geometry optimization for minimum power loss in turbulent film bearings are needed. For gas film bearings, foil bearing geometries that form more nearly optimum film shapes for maximum load capacity, and more effective surface protective coatings for high temperature operation are needed.

  1. Polar bears, Ursus maritimus

    Science.gov (United States)

    Rode, Karyn D.; Stirling, Ian

    2017-01-01

    Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

  2. Effect of fluid compressibility on journal bearing performance

    Science.gov (United States)

    Dimofte, Florin

    1993-01-01

    An analysis was undertaken to determine the effect of fluid film compressibility on the performance of fluid film bearings. A new version of the Reynolds equation was developed, using a polytropic expansion, for both steady-state and dynamic conditions. Polytropic exponents from 1 (isothermal) to 1000 (approaching an incompressible liquid) were evaluated for two bearing numbers, selected from a range of practical interest for cryogenic application, and without cavitation. Bearing loads were insensitive to fluid compressibility for low bearing numbers, as was expected. The effect of compressibility on attitude angle was significant, even when the bearing number was low. A small amount of fluid compressibility was enough to obtain stable running conditions. Incompressible liquid lacked stability at all conditions. Fluid compressibility can be used to control the bearing dynamic coefficients, thereby influencing the dynamic behavior of the rotor-bearing system.

  3. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  4. BINARY MINOR PLANETS

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, compiled from the...

  5. Teaching minority children hygiene

    DEFF Research Database (Denmark)

    Rheinländer, Thilde; Samuelsen, Helle; Dalsgaard, Anders

    2015-01-01

    Objectives. Ethnic minority children in Vietnam experience high levels of hygiene- and sanitation-related diseases. Improving hygiene for minority children is therefore vital for improving child health. The study objective was to investigate how kindergarten and home environments influence...... the learning of hygiene of pre-school ethnic minority children in rural Vietnam. Design. Eight months of ethnographic field studies were conducted among four ethnic minority groups living in highland and lowland communities in northern Vietnam. Data included participant observation in four kindergartens and 20...... homes of pre-school children, together with 67 semi-structured interviews with caregivers and five kindergarten staff. Thematic analysis was applied and concepts of social learning provided inputs to the analysis. Findings. This study showed that poor living conditions with lack of basic sanitation...

  6. Minority Veteran Report 2014

    Data.gov (United States)

    Department of Veterans Affairs — This report is the first comprehensive report that chronicles the history of racial and ethnic minorities in the military and as Veterans, profiles characteristics...

  7. Minorities in Iran

    DEFF Research Database (Denmark)

    Elling, Rasmus Christian

    Contrary to the popular understanding of Iran as a Persian nation, half of the country's population consists of minorities, among whom there has been significant ethnic mobilization at crucial stages in Iranian history. One such stage is now: suppressed minority demands, identity claims, and deba......Contrary to the popular understanding of Iran as a Persian nation, half of the country's population consists of minorities, among whom there has been significant ethnic mobilization at crucial stages in Iranian history. One such stage is now: suppressed minority demands, identity claims......, and debates on diversity have entered public discourse and politics. In 2005–2007, Iran was rocked by the most widespread ethnic unrest experienced in that country since the revolution. The same period was also marked by the re-emergence of nationalism. This interdisciplinary book takes a long-overdue step...

  8. Minority Veteran Report

    Data.gov (United States)

    Department of Veterans Affairs — This report is the first comprehensive report that chronicles the history of racial and ethnic minorities in the military and as Veterans, profiles characteristics...

  9. BCDC Minor Permits

    Data.gov (United States)

    California Department of Resources — An administrative permit can be issued for an activity that qualifies as a minor repair or improvement in a relatively short period of time and without a public...

  10. Multichoice minority game

    International Nuclear Information System (INIS)

    Ein-Dor, Liat; Metzler, Richard; Kanter, Ido; Kinzel, Wolfgang

    2001-01-01

    The generalization of the problem of adaptive competition, known as the minority game, to the case of K possible choices for each player, is addressed, and applied to a system of interacting perceptrons with input and output units of a type of K-state Potts spins. An optimal solution of this minority game, as well as the dynamic evolution of the adaptive strategies of the players, are solved analytically for a general K and compared with numerical simulations

  11. Fluorine lubricated bearing technology

    Science.gov (United States)

    Mallaire, F. R.

    1973-01-01

    An experimental program was conducted to evaluate and select materials for ball bearings intended for use in liquid fluorine and/or FLOX. The ability of three different ball-separator materials, each containing nickel, to form and transfer a nickel fluoride film to provide effective lubrication at the required areas of a ball bearing operating in liquid fluorine was evaluated. In addition, solid lubrication of a ball bearing operating in liquid fluorine by either a fused fluoride coating applied to all surfaces of the ball separator or by a fluoride impregnation of porous sintered material ball separators was evaluated. Less bearing wear occurred when tests were conducted in the less reactive FLOX. Bearings fabricated from any of the materials tested would have relatively short wear lives and would require frequent replacement in a reusable engine.

  12. Minority engineering scholarships renewal, 2011.

    Science.gov (United States)

    2012-08-01

    Scholarships for Minority Students Studying Engineering and Science : Support will make scholarships available to minority students : interested in engineering and science and will increase significantly the number of minority students that Missouri ...

  13. Effects of exotic species on Yellowstone's grizzly bears

    Science.gov (United States)

    Reinhart, Daniel P.; Haroldson, Mark A.; Mattson, D.J.; Gunther, Kerry A.

    2001-01-01

    Humans have affected grizzly bears (Ursus arctos horribilis) by direct mortality, competition for space and resources, and introduction of exotic species. Exotic organisms that have affected grizzly bears in the Greater Yellowstone Area include common dandelion (Taraxacum officinale), nonnative clovers (Trifolium spp.), domesticated livestock, bovine brucellosis (Brucella abortus), lake trout (Salvelinus namaycush), and white pine blister rust (Cronartium ribicola). Some bears consume substantial amounts of dandelion and clover. However, these exotic foods provide little digested energy compared to higher-quality bear foods. Domestic livestock are of greater energetic value, but use of this food by bears often leads to conflicts with humans and subsequent increases in bear mortality. Lake trout, blister rust, and brucellosis diminish grizzly bears foods. Lake trout prey on native cutthroat trout (Oncorhynchus clarkii) in Yellowstone Lake; white pine blister rust has the potential to destroy native whitebark pine (Pinus albicaulis) stands; and management response to bovine brucellosis, a disease found in the Yellowstone bison (Bison bison) and elk (Cervus elaphus), could reduce populations of these 2 species. Exotic species will likely cause more harm than good for Yellowstone grizzly bears. Managers have few options to mitigate or contain the impacts of exotics on Yellowstone's grizzly bears. Moreover, their potential negative impacts have only begun to unfold. Exotic species may lead to the loss of substantial highquality grizzly bear foods, including much of the bison, trout, and pine seeds that Yellowstone grizzly bears currently depend upon.

  14. Consumption choice by bears feeding on salmon.

    Science.gov (United States)

    Gende, S M; Quinn, T P; Willson, M F

    2001-05-01

    Consumption choice by brown (Ursus arctos) and black bears (U. americanus) feeding on salmon was recorded for over 20,000 bear-killed fish from 1994 to 1999 in Bristol Bay (sockeye salmon, Oncorhynchus nerka) and southeastern Alaska (pink, O. gorbuscha and chum salmon O. keta). These data revealed striking patterns of partial and selective consumption that varied with relative availability and attributes of the fish. As the availability of salmon decreased, bears consumed a larger proportion of each fish among both years and habitats. When availability was high (absolute number and density of salmon), bears consumed less biomass per captured fish, targeting energy-rich fish (those that had not spawned) or energy-rich body parts (eggs in females; brain in males). In contrast, individual fish were consumed to a much greater extent, regardless of sex or spawning status, in habitats or years of low salmon availability. The proportion of biomass consumed per fish was similar for males and females, when spawning status was statistically controlled, but bears targeted different body parts: the body flesh, brain and dorsal hump in males and the roe in females. Bears thus appeared to maximize energy intake by modifying the amount and body parts consumed, based on availability and attributes of spawning salmon.

  15. Disproportionate Minority Contact.

    Science.gov (United States)

    Fix, Rebecca L; Cyperski, Melissa A; Burkhart, Barry R

    2017-04-01

    The overrepresentation of racial/ethnic minorities within the criminal justice system relative to their population percentage, a phenomenon termed disproportionate minority contact, has been examined within general adult and adolescent offender populations; yet few studies have tested whether this phenomenon extends to juvenile sexual offenders (JSOs). In addition, few studies have examined whether offender race/ethnicity influences registration and notification requirements, which JSOs are subject to in some U.S. states. The present study assessed for disproportionate minority contact among general delinquent offenders and JSOs, meaning it aimed to test whether the criminal justice system treats those accused of sexual and non-sexual offenses differently by racial/ethnic group. Furthermore, racial/ethnic group differences in risk, legal classification, and sexual offending were examined for JSOs. Results indicated disproportionate minority contact was present among juveniles with non-sexual offenses and JSOs in Alabama. In addition, offense category and risk scores differed between African American and European American JSOs. Finally, registration classifications were predicted by offending characteristics, but not race/ethnicity. Implications and future directions regarding disproportionate minority contact among JSOs and social and legal policy affecting JSOs are discussed.

  16. Autonomy and minority rights

    DEFF Research Database (Denmark)

    Barten, Ulrike

    2008-01-01

    to a specific group. The question never posed is, if there is a point and in that case at what point the group can actually talk about being autonomous. Is there a minimum in the number of special rights and procedures that has to be reached in order for the package of rights to qualify as ‘granting autonomy......'? I will look at this in connection with minority rights, as minority rights accord special rights and procedures to a specific group. For example, minorities have sometimes far reaching competences in the educational field: setting up and running their own schools and to a certain degree also decide...... with kin-states face a two-way situation regarding autonomy. First there is the autonomy from the home-state - the state the minority exists in. Secondly, though, there is the question of autonomy from the kin-state: How autonomous is a minority when it is (partly) financed by the kin-state? The discussion...

  17. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  18. Work and minor work contracts

    CERN Document Server

    1999-01-01

    The Work and Minor Work contracts are all of the result-oriented type. The work is specified by CERN and the contractor is given full responsibility for its performance. The contracts are thus very similar to supply contracts. The re-tendering of the existing contracts is almost complete, except for some building maintenance contracts. A new cycle of re-tendering for some activities will be launched in the next twelve months. The total estimated expenditure in the year 2000 for the contracts referred to in this document is 27 750 000 Swiss francs at 1999 prices. The Finance Committee is invited: - to approve the proposed expenditure for the extension of contracts for which the estimated amount for the year 2000 exceeds 750 000 Swiss francs, namely those under references 1, 2, 3, 5, 7, 8, 9 and 23, highlighted in Table I; - to take note that all Work and Minor Work contracts have been tendered since 1 January 1994, except the small contracts shown under references 12 and 16 in Table I; - to take note that the ...

  19. SEBACEOUS CYSTS MINOR SURGERY

    Directory of Open Access Journals (Sweden)

    I Gusti Ayu Agung Laksemi

    2013-12-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Minor surgery is small surgery or localized example cut ulcers and boils, cyst excision, and suturing. Somethings that need to be considered in the preparation of the surgery is minor tools, operating rooms and operating tables, lighting, maintenance of tools and equipment, sterilization and desinfection equipment, preparation of patients and anesthesia. In general cysts is walled chamber that consist of fluid, cells and the remaining cells. Cysts are formed not due to inflammation although then be inflamed. Lining of the cysts wall is composed of fibrous tissue and usually coated epithelial cells or endothelial. Cysts formed by dilated glands and closed channels, glands, blood vessels, lymph channels or layers of the epidermis. Contents of the cysts wall consists of the results is serum, lymph, sweat sebum, epithelial cells, the stratum corneum, and hair. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  20. Sex Trafficking of Minors.

    Science.gov (United States)

    Moore, Jessica L; Kaplan, Dana M; Barron, Christine E

    2017-04-01

    Sex trafficking is an increasingly recognized global health crisis affecting every country and region in the world. Domestic minor sex trafficking is a subset of commercial sexual exploitation of children, defined as engagement of minors (sexual acts for items of value (eg, food, shelter, drugs, money) involving children victimized within US borders. These involved youth are at risk for serious immediate and long-term physical and mental health consequences. Continued efforts are needed to improve preventive efforts, identification, screening, appropriate interventions, and subsequent resource provision for victimized and high-risk youth. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Becoming (ethnic minority) teenagers

    DEFF Research Database (Denmark)

    Tørslev, Mette Kirstine; Norredam, Marie; Vitus, Kathrine

    2017-01-01

    This article explores how everyday school life interacts with students’ practices of ‘becoming teenagers’ at a Danish school, analysing how age and ethnicity intersect with emotional well-being. The article builds on an ethnographic study at a public sports school following ethnic minority...... and majority students in two school classes from the fifth to seventh grades. Taking a practice approach, the article first analyses school as a social site before turning phenomenological attention to experiences and expectations of becoming teenagers, focusing on the experiences of ethnic minority students...

  2. Investigation of Bearing Technology

    National Research Council Canada - National Science Library

    Maciag, Walter

    1998-01-01

    .... They eliminate roller needles and balls in bearings. Since the GC design does not require lubrication maintenance, there is no need for the u-joint cross to contain lubrication reservoirs and distribution channels and their input fitting...

  3. DW_BEAR

    Data.gov (United States)

    Department of Homeland Security — Subset of BEAR (Bi-Weekly Examination Analysis and Reporting) data used for financial audit remediation reporting within the Coast Guard Business Intelligence (CGBI)...

  4. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  5. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  6. Load responsive hydrodynamic bearing

    Science.gov (United States)

    Kalsi, Manmohan S.; Somogyi, Dezso; Dietle, Lannie L.

    2002-01-01

    A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

  7. Lubrication of an 85-mm ball bearing with RP-1

    Science.gov (United States)

    Addy, Harold E., Jr.; Schuller, Fredrick T.

    1993-01-01

    A parametric experimental investigation of an 85 millimeter bore angular contact ball bearing running in RP-1 fuel was performed at speeds of 10,000 to 24,000 rpm. Thrust loads were varied from 4450 to 17,800 Newtons (1000 to 4000 lbs.). Radial loads were varied from 1335 to 13,350 Newtons (300 to 3000 lbs.). RP-1 lubrication for the bearing was provided through a stationary jet ring located adjacent to the test bearing outer ring. Increases in both the thrust and radial loads resulted in increased bearing temperature, while increases in shaft speed resulted in much more dramatic increases in bearing temperature. These trends are typical for ball bearings operating under these types of conditions. Results are given for outer ring temperatures of the test bearing at the various test conditions employed. In addition, the heat energy removed from the bearing by the RP-1 was determined by measuring the increase in temperature as the RP-1 passed through the bearing. Results showed that the amount of heat energy removed by the RP-1 increased with both shaft speed and RP-1 flow rate to the bearing.

  8. Housing Problems of Minorities

    Science.gov (United States)

    Weaver, Robert

    1975-01-01

    This testimony, before a public hearing of the New York City Commission on Human Rights in May 1974, reviews the status of minority group housing and the effects of federal programs upon it, advocating an approach which recognizes the intrinsic locational and real estate value of many black ghettos. (Author/JM)

  9. Britain's Ethnic Minorities.

    Science.gov (United States)

    Central Office of Information, London (England).

    This pamphlet discusses the situation of ethnic minorities--particularly those of Caribbean, Asian, or African origin--in the United Kingdom. Following introductory material, the background to immigration in Britain is described and the numbers and geographic distribution of the different ethnic groups are discussed. Next comes a general…

  10. Minority Language Teaching

    NARCIS (Netherlands)

    Monique Turkenburg

    2001-01-01

    Original title: Onderwijs in alochtone levende talen. At the request of the Dutch Ministry of Education, Culture and Science, an exploratory study was carried out of minority Language teaching for primary school pupils. This exploratory study in seven municipalities not only shows the way in

  11. Sexual minorities seeking services.

    Science.gov (United States)

    Rogers, Tracey L; Emanuel, Kristen; Bradford, Judith

    2003-01-01

    SUMMARY Understanding the mental health needs of lesbian and bisexual (sexual minority) women is an integral part of designing and providing appropriate mental health services and treatment for them. In an effort to understand the mental health needs of sexual minority women who seek community treatment, a chart review was conducted of the 223 lesbian and bisexual women who presented for services between July 1, 1997 and December 31, 2000 at Fenway Community Health in Boston, MA. Data are based on clients' self-reports and clinician assessments of clients' presenting problem, relevant developmental history, prior mental health and substance abuse treatment, current reports of emotional/psychological symptoms, and areas of impaired functioning. Although substance abuse and suicidal ideation were commonly reported problems, other concerns were more frequently reported. High percentages of lesbians and bisexual women reported relationship concerns and lack of adequate social networks; rates of depression and anxiety based on clinicians' assessments were also high. Overall, lesbians and bisexual women did not differ in the issues they brought to treatment or level or types of impairment. Compared with previous community survey samples, however, study participants appeared to be healthier than general, non-clinical samples of self-identified lesbians, possibly reflecting the special characteristics of sexual minority women who seek treatment in specialized community sites such as the Fenway. Although patients who come to these sites may not represent the more general population of sexual minority women, community health centers known to serve lesbian, gay, bisexual and transgender (LGBT) individuals may be fruitful access points for studying the mental health status and treatment needs of sexual minority women.

  12. Polar bear attacks on humans: Implications of a changing climate

    Science.gov (United States)

    Wilder, James; Vongraven, Dag; Atwood, Todd C.; Hansen, Bob; Jessen, Amalie; Kochnev, Anatoly A.; York, Geoff; Vallender, Rachel; Hedman, Daryll; Gibbons, Melissa

    2017-01-01

    Understanding causes of polar bear (Ursus maritimus) attacks on humans is critical to ensuring both human safety and polar bear conservation. Although considerable attention has been focused on understanding black (U. americanus) and grizzly (U. arctos) bear conflicts with humans, there have been few attempts to systematically collect, analyze, and interpret available information on human-polar bear conflicts across their range. To help fill this knowledge gap, a database was developed (Polar Bear-Human Information Management System [PBHIMS]) to facilitate the range-wide collection and analysis of human-polar bear conflict data. We populated the PBHIMS with data collected throughout the polar bear range, analyzed polar bear attacks on people, and found that reported attacks have been extremely rare. From 1870–2014, we documented 73 attacks by wild polar bears, distributed among the 5 polar bear Range States (Canada, Greenland, Norway, Russia, and United States), which resulted in 20 human fatalities and 63 human injuries. We found that nutritionally stressed adult male polar bears were the most likely to pose threats to human safety. Attacks by adult females were rare, and most were attributed to defense of cubs. We judged that bears acted as a predator in most attacks, and that nearly all attacks involved ≤2 people. Increased concern for both human and bear safety is warranted in light of predictions of increased numbers of nutritionally stressed bears spending longer amounts of time on land near people because of the loss of their sea ice habitat. Improved conflict investigation is needed to collect accurate and relevant data and communicate accurate bear safety messages and mitigation strategies to the public. With better information, people can take proactive measures in polar bear habitat to ensure their safety and prevent conflicts with polar bears. This work represents an important first step towards improving our understanding of factors influencing

  13. Microstructure-mechanical property relationships for Al-Cu-Li-Zr alloys with minor additions of cadmium, indium or tin

    Science.gov (United States)

    Blackburn, L. B.; Starke, E. A., Jr.

    1989-01-01

    Minor amounts of cadmium, indium or tin were added to a baseline alloy with the nominal composition of Al-2.4Cu-2.4Li-0.15Zr. These elements were added in an attempt to increase the age-hardening response of the material such that high strengths could be achieved through heat-treatment alone, without the need for intermediate mechanical working. The alloy variant containing indium achieved a higher peak hardness in comparison to the other alloy variations, including the baseline material, when aged at temperatures ranging from 160 C to 190 C. Tensile tests on specimens peak-aged at 160 indicated the yield strength of the indium-bearing alloy increased by approximately 15 percent compared to that of the peak-aged baseline alloy. In addition, the yield strength obtained in the indium-bearing alloy was comparable to that reported for similar baseline material subjected to a 6 percent stretch prior to peak-aging at 190 C. The higher strength levels obtaied for the indium-bearing alloy are attributed to increased number densities and homogeneity of both the T1 and theta-prime phases, as determined by TEM studies.

  14. Watchable Wildlife: The Black Bear

    Science.gov (United States)

    Lynn L. Rogers

    1992-01-01

    Black bears are the bears people most often encounter. Black bears live in forests over much of North America, unlike grizzlies that live only in Alaska, northern and western Canada, and the northern Rocky Mountains. This brochure presents the latest information on black bear life and how this species responds to an ever-increasing number of campers, hikers, and...

  15. Climate Drives Polar Bear Origins

    Science.gov (United States)

    In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

  16. Minor lipophilic compounds in edible insects

    OpenAIRE

    Monika Sabolová; Anna Adámková; Lenka Kouřimská; Diana Chrpová; Jan Pánek

    2016-01-01

    Contemporary society is faced with the question how to ensure suffiecient nutrition (quantity and quality) for rapidly growing population. One solution can be consumption of edible insect, which can have very good nutritional value (dietary energy, protein, fatty acids, fibers, dietary minerals and vitamins composition). Some edible insects species, which contains a relatively large amount of fat, can have a potential to be a „good" (interesting, new) source of minor lipophilic compound...

  17. Minority Language Protection in Italy. Linguistic minorities and the Media

    OpenAIRE

    Sierp, Aline

    2008-01-01

    This article deals with the Italian case of minority language protection in the media. After providing a general introduction to the development of the protection of minority languages in Europe in general and of minority language broadcast media in Italy in particular, the article focuses on the role that mass media can play in the preservation or weakening of minority languages. By comparing different measures of protection adopted by national and regional authorities in Italy, the article ...

  18. Use of naturally occurring mercury to determine the importance of cutthroat trout to Yellowstone grizzly bears

    Science.gov (United States)

    Felicetti, L.A.; Schwartz, C.C.; Rye, R.O.; Gunther, K.A.; Crock, J.G.; Haroldson, M.A.; Waits, L.; Robbins, C.T.

    2004-01-01

    Spawning cutthroat trout (Oncorhynchus clarki (Richardson, 1836)) are a potentially important food resource for grizzly bears (Ursus arctos horribilis Ord, 1815) in the Greater Yellowstone Ecosystem. We developed a method to estimate the amount of cutthroat trout ingested by grizzly bears living in the Yellowstone Lake area. The method utilized (i) the relatively high, naturally occurring concentration of mercury in Yellowstone Lake cutthroat trout (508 ± 93 ppb) and its virtual absence in all other bear foods (6 ppb), (ii) hair snares to remotely collect hair from bears visiting spawning cutthroat trout streams between 1997 and 2000, (iii) DNA analyses to identify the individual and sex of grizzly bears leaving a hair sample, (iv) feeding trials with captive bears to develop relationships between fish and mercury intake and hair mercury concentrations, and (v) mercury analyses of hair collected from wild bears to estimate the amount of trout consumed by each bear. Male grizzly bears consumed an average of 5 times more trout/kg bear than did female grizzly bears. Estimated cutthroat trout intake per year by the grizzly bear population was only a small fraction of that estimated by previous investigators, and males consumed 92% of all trout ingested by grizzly bears.

  19. Omental torsion in a captive polar bear (Ursus maritimus).

    Science.gov (United States)

    Mendez-Angulo, Jose L; Funes, Francisco J; Trent, Ava M; Willette, Michelle; Woodhouse, Kerry; Renier, Anna C

    2014-03-01

    This is the first case report of an omental torsion in a polar bear (Ursus maritimus). A captive, 23-yr-old, 250-kg, intact female polar bear presented to the University of Minnesota Veterinary Medical Center with a 2-day history of lethargy, depression, and vomiting. Abdominal ultrasound identified large amounts of hyperechoic free peritoneal fluid. Ultrasound-guided abdominocentesis was performed and yielded thick serosanguinous fluid compatible with a hemoabdomen. An exploratory laparotomy revealed a large amount of malodorous, serosanguineous fluid and multiple necrotic blood clots associated with a torsion of the greater omentum and rupture of a branch of the omental artery. A partial omentectomy was performed to remove the necrotic tissue and the abdomen was copiously lavaged. The polar bear recovered successfully and is reported to be clinically well 6 mo later. This condition should be considered as a differential in bears with clinical signs of intestinal obstruction and hemoabdomen.

  20. Hybrid superconductor magnet bearings

    Science.gov (United States)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  1. Minor actinide transmutation using minor actinide burner reactors

    International Nuclear Information System (INIS)

    Mukaiyama, T.; Yoshida, H.; Gunji, Y.

    1991-01-01

    The concept of minor actinide burner reactor is proposed as an efficient way to transmute long-lived minor actinides in order to ease the burden of high-level radioactive waste disposal problem. Conceptual design study of minor actinide burner reactors was performed to obtain a reactor model with very hard neutron spectrum and very high neutron flux in which minor actinides can be fissioned efficiently. Two models of burner reactors were obtained, one with metal fuel core and the other with particle fuel core. Minor actinide transmutation by the actinide burner reactors is compared with that by power reactors from both the reactor physics and fuel cycle facilities view point. (author)

  2. BOOK REVIEW: Minority Games

    Science.gov (United States)

    Metzler, R.

    2005-02-01

    New branches of scientific disciplines often have a few paradigmatic models that serve as a testing ground for theories and a starting point for new inquiries. In the late 1990s, one of these models found fertile ground in the growing field of econophysics: the Minority Game (MG), a model for speculative markets that combined conceptual simplicity with interesting emergent behaviour and challenging mathematics. The two basic ingredients were the minority mechanism (a large number of players have to choose one of two alternatives in each round, and the minority wins) and limited rationality (each player has a small set of decision rules, and chooses the more successful ones). Combining these, one observes a phase transition between a crowded and an inefficient market phase, fat-tailed price distributions at the transition, and many other nontrivial effects. Now, seven years after the first paper, three of the key players—Damien Challet, Matteo Marsili and Yi-Cheng Zhang—have published a monograph that summarizes the current state of the science. The book consists of two parts: a 100-page overview of the various aspects of the MG, and reprints of many essential papers. The first chapters of Part I give a well-written description of the motivation and the history behind the MG, and then go into the phenomenology and the mathematical treatment of the model. The authors emphasize the `physics' underlying the behaviour and give coherent, intuitive explanations that are difficult to extract from the original papers. The mathematics is outlined, but calculations are not carried out in great detail (maybe they could have been included in an appendix). Chapter 4 then discusses how and why the MG is a model for speculative markets, how it can be modified to give a closer fit to observed market statistics (in particular, reproducing the `stylized facts' of fat-tailed distributions and volatility clustering), and what conclusions one can draw from the behaviour of the MG

  3. Compliant hydrodynamic fluid journal bearing

    Science.gov (United States)

    Warren, E. L. (Inventor)

    1985-01-01

    An air bearing structure is described that prevents destructive bending moments within the top foil. Welds are eliminated by mounting the top bearing foil in the bearing cartridge sleeve without using a space block. Tabs or pins at the end of the top bearing foil are restrained by slots or stops formed in the cartridge sleeve. These structural members are free to move in a direction normal to the shaft while being restrained from movement in the direction of shaft rotation.

  4. Magnetic bearing and motor

    Science.gov (United States)

    Studer, Philip A. (Inventor)

    1983-01-01

    A magnetic bearing assembly (10) has an intermediate rotatable section (33) having an outer cylindrical member (30) coaxially suspended by a torsion wire (72) around an axially polarized cylindrical magnet (32). Axial alignment between the pole faces (40-43) of the intermediate section (33) and end surfaces (50-53) of opposed end bells (20, 22) provides a path of least reluctance across intervening air gaps (60-63) for the magnetic flux emanating from magnet (32). Radial dislocation increases the reluctance and creates a radial restoring force. Substitution of radially polarized magnets 107 fixed to a magnetically permeable cylinder (32') and insertion of pairs of armature coil windings (109-112) between the cylinder pair (33') provides an integral magnetic bearing and torsion motor (100) able to provide arcuately limited rotational drive.

  5. Passive magnetic bearing system

    Science.gov (United States)

    Post, Richard F.

    2014-09-02

    An axial stabilizer for the rotor of a magnetic bearing provides external control of stiffness through switching in external inductances. External control also allows the stabilizer to become a part of a passive/active magnetic bearing system that requires no external source of power and no position sensor. Stabilizers for displacements transverse to the axis of rotation are provided that require only a single cylindrical Halbach array in its operation, and thus are especially suited for use in high rotation speed applications, such as flywheel energy storage systems. The elimination of the need of an inner cylindrical array solves the difficult mechanical problem of supplying support against centrifugal forces for the magnets of that array. Compensation is provided for the temperature variation of the strength of the magnetic fields of the permanent magnets in the levitating magnet arrays.

  6. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  7. Minor actinide transmutation on PWR burnable poison rods

    International Nuclear Information System (INIS)

    Hu, Wenchao; Liu, Bin; Ouyang, Xiaoping; Tu, Jing; Liu, Fang; Huang, Liming; Fu, Juan; Meng, Haiyan

    2015-01-01

    Highlights: • Key issues associated with MA transmutation are the appropriate loading pattern. • Commercial PWRs are the only choice to transmute MAs in large scale currently. • Considerable amount of MA can be loaded to PWR without disturbing k eff markedly. • Loading MA to PWR burnable poison rods for transmutation is an optimal loading pattern. - Abstract: Minor actinides are the primary contributors to long term radiotoxicity in spent fuel. The majority of commercial reactors in operation in the world are PWRs, so to study the minor actinide transmutation characteristics in the PWRs and ultimately realize the successful minor actinide transmutation in PWRs are crucial problem in the area of the nuclear waste disposal. The key issues associated with the minor actinide transmutation are the appropriate loading patterns when introducing minor actinides to the PWR core. We study two different minor actinide transmutation materials loading patterns on the PWR burnable poison rods, one is to coat a thin layer of minor actinide in the water gap between the zircaloy cladding and the stainless steel which is filled with water, another one is that minor actinides substitute for burnable poison directly within burnable poison rods. Simulation calculation indicates that the two loading patterns can load approximately equivalent to 5–6 PWR annual minor actinide yields without disturbing the PWR k eff markedly. The PWR k eff can return criticality again by slightly reducing the boric acid concentration in the coolant of PWR or removing some burnable poison rods without coating the minor actinide transmutation materials from PWR core. In other words, loading minor actinide transmutation material to PWR does not consume extra neutron, minor actinide just consumes the neutrons which absorbed by the removed control poisons. Both minor actinide loading patterns are technically feasible; most importantly do not need to modify the configuration of the PWR core and

  8. COMPOSITION OF BLACK BEAR MILK.

    Science.gov (United States)

    An analysis of black bear ( Ursus americanus Pallas) milk showed that the total solids, fat and protein were much higher and the lactose lower than...either cow or human milk. In comparison with polar bear (Thalarcotos maritimus ), the black bear milk was lower in fat, protein and total calories. (Author)

  9. Frictionless Bearing Uses Permanent Magnets

    Science.gov (United States)

    1965-01-01

    The purpose of this innovation was to develop a frictionless bearing for high speed, light load applications. The device involves the incorporation of permanent magnets in the bearing design. The repulsion of like magnetic poles provides concentric support of the inner member so that no metallic contact occurs between the bearing surfaces.

  10. Rotating plug bearing and seal

    International Nuclear Information System (INIS)

    Wade, E.E.

    1977-01-01

    Disclosed is a bearing and seal structure for nuclear reactors utilizing rotating plugs above the nuclear reactor vessel. The structure permits lubrication of bearings and seals of the rotating plugs without risk of the lubricant draining into the reactor vessel below. The structure permits lubrication by utilizing a rotating outer race bearing. 19 claims, 3 figures

  11. Radium bearing waste disposal

    International Nuclear Information System (INIS)

    Tope, W.G.; Nixon, D.A.; Smith, M.L.; Stone, T.J.; Vogel, R.A.; Schofield, W.D.

    1995-01-01

    Fernald radium bearing ore residue waste, stored within Silos 1 and 2 (K-65) and Silo 3, will be vitrified for disposal at the Nevada Test Site (NTS). A comprehensive, parametric evaluation of waste form, packaging, and transportation alternatives was completed to identify the most cost-effective approach. The impacts of waste loading, waste form, regulatory requirements, NTS waste acceptance criteria, as-low-as-reasonably-achievable principles, and material handling costs were factored into the recommended approach

  12. National Tests and minorities

    DEFF Research Database (Denmark)

    Andreasen, Karen Egedal

    Assessment in school represent a technology and materiality with profound impact on the life, activities and interactions in school (eg. Lawn & Grosvenor, 2005). It can be considered as an integrated and in different ways also dominating part of pedagogic practice which influence processes of in......- and exclusion in both direct and in more indirect ways. Depending of its design and use it might also point to differences between pupils with references to categories such as clever, skilled, good, medium, average, below average, best etc.. These processes might be considered as problematic at the micro level...... language, and are often not adapted to the languages of minorities.However, regionally determined differences – for example, linguistic or cultural – often exhibit considerable influence over student performance in such national academic tests, with any such potential effects generally not considered...

  13. Bearing for liquid metal pump

    International Nuclear Information System (INIS)

    Dickinson, R.J.; Pennell, W.E.; Wasko, J.

    1984-01-01

    A liquid metal pump bearing support comprises a series of tangentially oriented spokes that connect the bearing cylinder to the pump internals structure. The spokes may be arranged in a plurality of planes extending from the bearing cylinder to the pump internals with the spokes in one plane being arranged alternately with those in the next plane. The bearing support structure provides the pump with sufficient lateral support for the bearing structure together with the capability of accommodating differential thermal expansion without adversely affecting pump performance

  14. Bearing, gearing, and lubrication technology

    Science.gov (United States)

    Anderson, W. J.

    1978-01-01

    Results of selected NASA research programs on rolling-element and fluid-film bearings, gears, and elastohydrodynamic lubrication are reported. Advances in rolling-element bearing material technology, which have resulted in a significant improvement in fatigue life, and which make possible new applications for rolling bearings, are discussed. Research on whirl-resistant, fluid-film bearings, suitable for very high-speed applications, is discussed. An improved method for predicting gear pitting life is reported. An improved formula for calculating the thickness of elastohydrodynamic films (the existence of which help to define the operating regime of concentrated contact mechanisms such as bearings, gears, and cams) is described.

  15. Bearing construction for refrigeration compresssor

    Science.gov (United States)

    Middleton, Marc G.; Nelson, Richard T.

    1988-01-01

    A hermetic refrigeration compressor has a cylinder block and a crankshaft rotatable about a vertical axis to reciprocate a piston in a cylinder on the cylinder block. A separate bearing housing is secured to the central portion of the cylinder block and extends vertically along the crankshaft, where it carries a pair of roller bearings to journal the crankshaft. The crankshaft has a radially extending flange which is journaled by a thrust-type roller bearing above the bearing housing to absorb the vertical forces on the crankshaft so that all three of the roller bearings are between the crankshaft and the bearing housing to maintain and control the close tolerances required by such bearings.

  16. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of..., 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and Black Bear Development Holdings, LLC and Black Bear SO, LLC (transferees) filed an application for the partial the transfer of licenses...

  17. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

  18. Performance of solid lubricated ball bearings at high-temperatures in a vacuum

    Science.gov (United States)

    Seki, Katsumi; Suzuki, Mineo; Nishimura, Makoto; Hasegawa, Masaji; Moriyama, Minoru

    1994-07-01

    Ball bearings which can operate at high temperatures in a vacuum will be required with advances in technology. Among the issues for the operation of ball bearings at high temperatures, solid lubricants and bearing materials are crucial. The aim of this study was to develop ball bearings for use at high temperatures in a vacuum. The tested bearings were 20-mm bore-sized angular contact ball bearings. Three combinations of bearing materials were tested: M-50 bearings, hybrid bearings with M-50 races and Si3N4 balls, and Si3N4 bearings. M-50 bearings were lubricated with a silver film. Hybrid and ceramic bearings were lubricated with a pre-coated sputtered MoS2 film and a self-lubricating hot-pressed composite retainer. Tests were carried out at temperatures up to 500 C and a rotational speed of 600 rpm under an axial load of 50 N in a vacuum. Excellent performance at 500 C in a vacuum was obtained for Si3N4 bearings. Frictional torque was low and stable for more than 5x10(exp 7) revolutions. After the tests, the bearings were in very good condition with a small amount of wear. Hybrid bearings also showed very good performance at 350 C in a vacuum. M-50 steel bearings were operated without failure at 350 C in a vacuum, although frictional torque was rather high and unstable. X-ray photoelectron spectroscopy (XPS) analysis and scanning electron microscopy (SEM) observation revealed the existence of a film on the ball surface transferred from the composite retainer for both hybrid and ceramic bearings.

  19. The evolution of minor active and toxic gases in repositories

    International Nuclear Information System (INIS)

    Biddle, P.; Rees, J.H.; Davies, A.A.; McGahan, D.J.; Rushbrook, P.E.

    1988-09-01

    This study has considered a number of toxic and active gases which could potentially form in relatively small amounts in a deep repository for radioactive wastes. It has been concluded that many of these would react under repository conditions or be highly soluble in groundwater. The minor amounts of the inert and relatively insoluble gas krypton-85 would dissolve in a small volume of repository water. The wide range of organic gases and vapours that could form in trace amounts has been shortened to a list of 21 by consideration of their toxicity, volatibility and extent of formation at a landfill site for non-radioactive waste. The amounts of the inert and inactive gas helium formed from α-particles and the decay of tritium will have only a very minor effect on the overall rate of gas production. (author)

  20. Ethnic minority dropout in economics

    NARCIS (Netherlands)

    Arnold, I.J.M.

    2013-01-01

    This paper investigates the first-year study success of minority students in the bachelor program in economics at Erasmus University Rotterdam. We find that the gap in study success between minority and majority students can be attributed to differences in high school education. Students from

  1. Linguistic Landscape and Minority Languages

    Science.gov (United States)

    Cenoz, Jasone; Gorter, Durk

    2006-01-01

    This paper focuses on the linguistic landscape of two streets in two multilingual cities in Friesland (Netherlands) and the Basque Country (Spain) where a minority language is spoken, Basque or Frisian. The paper analyses the use of the minority language (Basque or Frisian), the state language (Spanish or Dutch) and English as an international…

  2. Ethnic Minority Dropout in Economics

    Science.gov (United States)

    Arnold, Ivo J. M.

    2013-01-01

    This paper investigates the first-year study success of minority students in the bachelor program in economics at Erasmus University Rotterdam. We find that the gap in study success between minority and majority students can be attributed to differences in high school education. Students from similar high school tracks show no significant…

  3. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  4. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  5. Improvement of bearing support lubrication

    Directory of Open Access Journals (Sweden)

    Shehovtseva E. V.

    2016-12-01

    Full Text Available Gas turbine engine bearing supports is an important part in providing product efficiency of general and special-purpose engineering industry. Attempts are being made to increase efficiency of bearing support. Such attempts are caused by the modern tendency of the development of engineering striving for compact machines and units possessing increased reliability and durability. Researches on finding discrepancies in operation of support for this purpose have been executed. The reasons of occurrence the fatigue crumbling on external bearing races at different stages development of working surface damage have been investigated. The basic constructions of support of shaft for the aviation gas turbine engine and methods of their lubrication have been considered. Shortcomings of existing methods of lubrication of bearing supports have been marked. The upgraded construction of the module of gas turbine bearing shaft, which allows to improve conditions of lubrication and bearing cooling as a result of a uniform oil feed to the contact zones of outside bearing race and rolling elements and forced oil removal from contact zones of inside bearing race and rolling elements has been suggested. The task of improving conditions of lubrication supply to an internal holder of the bearing has been solved. The developed design allows applying unconventional methods of lubrication and cooling of a bearing support. Thus it is recommended to use process of regulation of a microrough on working surfaces bearing support during grinding-in. It will allow to improve a stage grinding-in and to increase reliability and durability of bearing support.

  6. Biochemical Content of Cambium of Abies nephrolepis Eaten by Bears on the Far East of Russia

    Directory of Open Access Journals (Sweden)

    I. V. Seryodkin

    2017-01-01

    Full Text Available The peculiarity of bears behavior of stripping of bark is typical for all species. We have described the damage to trees, by Asiatic black bear (Ursus thibetanus and brown bear (U. arctos in Primorsky Krai and by brown bears on the Sakhalin Island during 1998–2015. In this study, we studied the damaged bark of the tree only in cases where it was clear that part of the cambium was eaten by bears. Cambium of species Abies nephrolepis is the most preferred for bear consumption in Primorsky Krai. We distinguished very large seasonal fluctuations in the amount of its consumption. The greatest interest of bears in this kind of food is in the summer time. We have analyzed the composition of the cambium of A. nephrolepis. These results suggest that the important purpose of the use of this kind of food is to restore and maintain the normal functioning of the intestines.

  7. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  8. Reducing Stress-Corrosion Cracking in Bearing Alloys

    Science.gov (United States)

    Paton, N. E.; Dennies, D. P.; Lumsden, I., J.b.

    1986-01-01

    Resistance to stress-corrosion cracking in some stainless-steel alloys increased by addition of small amounts of noble metals. 0.75 to 1.00 percent by weight of palladium or platinum added to alloy melt sufficient to improve properties of certain stainless steels so they could be used in manufacture of high-speed bearings.

  9. 33 CFR 25.117 - Proof of amount claimed for personal injury or death.

    Science.gov (United States)

    2010-07-01

    ... personal injury or death. 25.117 Section 25.117 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY GENERAL CLAIMS General § 25.117 Proof of amount claimed for personal injury or death. The... examination, makes mutually convenient arrangements for such an examination, and bears the costs thereof. (c...

  10. IMPACTS OF MARINE AEROSOLS ON SURFACE WATER CHEMISTRY AT BEAR BROOK WATERSHED, MAINE USA

    Science.gov (United States)

    The East Bear catchment at Bear Brook Watershed, Maine receives moderate (for the eastern U.S.) amounts of Cl- in wet and dry deposition. In 1989, Cl- in precipitation ranged from 2 to 55 eq/L. Dry, occult, and wet deposition plus evapotranspiration resulted in stream Cl- averagi...

  11. Autosizing Control Panel for Needle Bearing

    OpenAIRE

    Prof.A.R.Wadhekar,; Ms Jyoti R. Rajput

    2016-01-01

    A needle roller bearing is a bearing which uses small cylindrical rollers. Bearings are used to reduce friction of any rotating surface. Needle bearings have a large surface in contact with the bearing outer surfaces as compared to ball bearings. There is less added clearance(Diameter of the shaft and the diameter of the bearing are different) so they are much compact. The structure consists of a needle cage which contains the needle rollersthemselves and an outer race (The housin...

  12. Permanent-Magnet Meissner Bearing

    Science.gov (United States)

    Robertson, Glen A.

    1994-01-01

    Permanent-magnet meissner bearing features inherently stable, self-centering conical configuration. Bearing made stiffer or less stiff by selection of magnets, springs, and spring adjustments. Cylindrical permanent magnets with axial magnetization stacked coaxially on rotor with alternating polarity. Typically, rare-earth magnets used. Magnets machined and fitted together to form conical outer surface.

  13. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  14. What about the Javan Bear?

    NARCIS (Netherlands)

    Jentink, F.A.

    1898-01-01

    The other day I read in a dutch popular periodical a paper dealing with the different species of Bears and their geographical distribution. To my great surprise the Malayan Bear was mentioned from Java: the locality Java being quite new to me I wrote to the author of that paper and asked him some

  15. Empirical relationships between tree fall and landscape-level amounts of logging and fire.

    Science.gov (United States)

    Lindenmayer, David B; Blanchard, Wade; Blair, David; McBurney, Lachlan; Stein, John; Banks, Sam C

    2018-01-01

    Large old trees are critically important keystone structures in forest ecosystems globally. Populations of these trees are also in rapid decline in many forest ecosystems, making it important to quantify the factors that influence their dynamics at different spatial scales. Large old trees often occur in forest landscapes also subject to fire and logging. However, the effects on the risk of collapse of large old trees of the amount of logging and fire in the surrounding landscape are not well understood. Using an 18-year study in the Mountain Ash (Eucalyptus regnans) forests of the Central Highlands of Victoria, we quantify relationships between the probability of collapse of large old hollow-bearing trees at a site and the amount of logging and the amount of fire in the surrounding landscape. We found the probability of collapse increased with an increasing amount of logged forest in the surrounding landscape. It also increased with a greater amount of burned area in the surrounding landscape, particularly for trees in highly advanced stages of decay. The most likely explanation for elevated tree fall with an increasing amount of logged or burned areas in the surrounding landscape is change in wind movement patterns associated with cutblocks or burned areas. Previous studies show that large old hollow-bearing trees are already at high risk of collapse in our study area. New analyses presented here indicate that additional logging operations in the surrounding landscape will further elevate that risk. Current logging prescriptions require the protection of large old hollow-bearing trees on cutblocks. We suggest that efforts to reduce the probability of collapse of large old hollow-bearing trees on unlogged sites will demand careful landscape planning to limit the amount of timber harvesting in the surrounding landscape.

  16. Nonlinear control of magnetic bearings

    Science.gov (United States)

    Pradeep, A. K.; Gurumoorthy, R.

    1994-01-01

    In this paper we present a variety of nonlinear controllers for the magnetic bearing that ensure both stability and robustness. We utilize techniques of discontinuous control to design novel control laws for the magnetic bearing. We present in particular sliding mode controllers, time optimal controllers, winding algorithm based controllers, nested switching controllers, fractional controllers, and synchronous switching controllers for the magnetic bearing. We show existence of solutions to systems governed by discontinuous control laws, and prove stability and robustness of the chosen control laws in a rigorous setting. We design sliding mode observers for the magnetic bearing and prove the convergence of the state estimates to their true values. We present simulation results of the performance of the magnetic bearing subject to the aforementioned control laws, and conclude with comments on design.

  17. Flywheel Challenge: HTS Magnetic Bearing

    International Nuclear Information System (INIS)

    Werfel, F N; Floegel-Delor, U; Riedel, T; Rothfeld, R; Wippich, D; Goebel, B

    2006-01-01

    A 200 mm cylindrical engineering prototype high temperature superconducting (HTS) was designed and fabricated. Measurements show that the 17 kg PM rotor can suspend safely 1000 kg in axial direction and 470 kg radially. The rationale for the bearing performance is to stabilize a 400 kg rotor of a new compact 5 kWh/280 kW flywheel energy storage system (COM - FESS). Measurements of the magnetic bearing force, stiffness and drag-torque are presented indicated the successful targeting a milestone in the HTS bearing technology. The influence of the PM configuration and the YBCO temperature on the bearing performance was experimentally studied, providing high-force or high-stiffness behaviour. The axial stiffness 5 kN/mm at 0.5 mm displacement is the highest value of a HTS bearing we know

  18. Astrographic Positions of Minor Planets

    Science.gov (United States)

    Naskrecki, W.; Swierkowska, S.

    The paper presents the photographic position of minor planets taken in the years 1986/1987 at the Astronomical Observatory of A. Mickiewicz University, Poznan, with an astrograph of the F=1500 mm, d=300 mm.

  19. Dictionary of Minor Planet Names

    CERN Document Server

    Schmadel, Lutz D

    2007-01-01

    Dictionary of Minor Planet Names, Fifth Edition, is the official reference for the field of the IAU, which serves as the internationally recognised authority for assigning designations to celestial bodies and any surface features on them. The accelerating rate of the discovery of minor planets has not only made a new edition of this established compendium necessary but has also significantly altered its scope: this thoroughly revised edition concentrates on the approximately 10,000 minor planets that carry a name. It provides authoritative information about the basis for all names of minor planets. In addition to being of practical value for identification purposes, this collection provides a most interesting historical insight into the work of those astronomers who over two centuries vested their affinities in a rich and colorful variety of ingenious names, from heavenly goddesses to more prosaic constructions. The fifth edition serves as the primary reference, with plans for complementary booklets with newl...

  20. Demarketing, minorities, and national attachment

    NARCIS (Netherlands)

    Grinstein, A.; Nisan, Udi

    This study addresses two important global trends: protection of public goods, specifically the environment, and the emergence of multiethnic societies with influential minority groups. The study tests the effect of a government proenvironmental demarketing campaign on the deconsumption behavior of

  1. NAFTA Minor Use Joint Reviews

    Science.gov (United States)

    EPA and Health Canada Pest Management Regulatory Agency (PMRA) worked together to develop a registration process that will permit a regulatory decision of pesticide uses for the minor use grower communities in both countries simultaneously.

  2. Properties of minor actinide nitrides

    International Nuclear Information System (INIS)

    Takano, Masahide; Itoh, Akinori; Akabori, Mitsuo; Arai, Yasuo; Minato, Kazuo

    2004-01-01

    The present status of the research on properties of minor actinide nitrides for the development of an advanced nuclear fuel cycle based on nitride fuel and pyrochemical reprocessing is described. Some thermal stabilities of Am-based nitrides such as AmN and (Am, Zr)N were mainly investigated. Stabilization effect of ZrN was cleary confirmed for the vaporization and hydrolytic behaviors. New experimental equipments for measuring thermal properties of minor actinide nitrides were also introduced. (author)

  3. DESIGN HANDBOOK ON GAS BEARINGS FOR GYROSCOPES.

    Science.gov (United States)

    consisting of a plain journal for supporting radial loads flanked by two spiral-grooved thrust bearings to support double-acting thrust loads; (3) the spiral-grooved journal bearing ; and (4) the spiral-grooved conical bearing.

  4. Hybrid Hydrostatic/Transient Roller Bearing Assembly

    Science.gov (United States)

    Justak, John F.

    1992-01-01

    Proposed bearing assembly for shaft of high-speed turbopump includes both hydrostatic and rolling-element bearings. Rolling-element bearing unloaded at high speed by centrifugal expansion of outer race and transient retainer.

  5. Two pad axially grooved hydrostatic bearing

    Science.gov (United States)

    San Andres, Luis A. (Inventor)

    1995-01-01

    A hydrostatic bearing having two axial grooves on opposite sides of the bearing for breaking the rotational symmetry in the dynamic force coefficients thus reducing the whirl frequency ratio and increasing the damping and stiffness of the hydrostatic bearing.

  6. Testing N 205 type antifiction bearings in liquid sodium

    International Nuclear Information System (INIS)

    Matal, O.; Handl, Z.

    1976-01-01

    Comprehensive tests were carried out of special N 205 antifriction bearing in liquid, hot sodium at temperatures of 370 degC and 420 degC. Sodium used for tests contained various amounts of oxygen. Visual inspection, X-ray spectral microanalysis, X-ray phase analysis and accurate measurements before and after tests were used to assess the influence of hot aggresive metal. It was found that under the conditions simulated by the tests the ball bearings can be expected to have a short service life. (author)

  7. Deformation Analysis of Fixed Bearing Inclined Plane Thrust Bearing

    Directory of Open Access Journals (Sweden)

    LI Yong--hai

    2017-02-01

    Full Text Available According to the theory of lubrication,Numerical simulation of the deformation of the thrust bearing of the fixed inclined plane was carried out,by finite element numerical analysis method and using the ANSYS software. The mathematical model of the oil film shape control equations about of the deformation and bearing is established. Analytical result showed that the force caused the tile surface generating concave deformation,and convex deformation increased with the height and the size of the load and bearing;Tile surface temperature generated convex deformation and increased with the height and the size of the temperature of bearing bush;The actual deformation of the tile surface is the superposition of the force and the thermal deformation. This conclusion can provide reference for the design and the application of thrust bearing,to reduce the tile surface,which is not conducive to the carrying capacity of the concave deformation.

  8. EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

    Directory of Open Access Journals (Sweden)

    Emin GÜLLÜ

    2000-01-01

    Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

  9. Minority workers or minority human beings? A European dilemma

    Science.gov (United States)

    Skutnabb-Kangas, Tove; Phillipson, Robert

    1996-07-01

    "European" identities may be politonymic, toponymic, ethnomyic or linguonymic (Bromley 1984). Each dimension may affect whether migrant minorities are treated as "European", and influence their schooling, integration and rights. Treatment and terminology vary in different states and periods of migration. However, the position for immigrated minorities is that they are still largely seen as workers rather than human beings with equal rights. Lack of success in schools is blamed on the migrants themselves rather than the educational system. This construction of migrants as being deficient is parallel to educational practice which falls within a UN definition of linguistic genocide, and contributes to mis-education. If current efforts in international bodies to codify educational linguistic human rights were to lead to greater support for minorities, this could assist in a redefinition of national identities and a reduction of racism and conflict.

  10. Bears, Big and Little. Young Discovery Library Series.

    Science.gov (United States)

    Pfeffer, Pierre

    This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

  11. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Science.gov (United States)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  12. Library Construction Using Trace Amount of DNA

    OpenAIRE

    Chow, Julianna; Dalin, Eileen; Woyke, Tanja; Lucas, Susan; Cheng, Jan-Fang

    2008-01-01

    As a user facility, The US Department of Energy?s Joint Genome Institute, in collaboration with scientists around the world, are able to generate DNA sequences for a diversity of organisms. Often times, the amount of DNA provided for library construction is limited. It is important to develop a protocol to minimize the amount of DNA required for library construction. In an attempt to test the minimum amount of DNA necessary for library construction, we decided to use two approaches to clon...

  13. The bear in Eurasian plant names: motivations and models.

    Science.gov (United States)

    Kolosova, Valeria; Svanberg, Ingvar; Kalle, Raivo; Strecker, Lisa; Özkan, Ayşe Mine Gençler; Pieroni, Andrea; Cianfaglione, Kevin; Molnár, Zsolt; Papp, Nora; Łuczaj, Łukasz; Dimitrova, Dessislava; Šeškauskaitė, Daiva; Roper, Jonathan; Hajdari, Avni; Sõukand, Renata

    2017-02-21

    Ethnolinguistic studies are important for understanding an ethnic group's ideas on the world, expressed in its language. Comparing corresponding aspects of such knowledge might help clarify problems of origin for certain concepts and words, e.g. whether they form common heritage, have an independent origin, are borrowings, or calques. The current study was conducted on the material in Slavonic, Baltic, Germanic, Romance, Finno-Ugrian, Turkic and Albanian languages. The bear was chosen as being a large, dangerous animal, important in traditional culture, whose name is widely reflected in folk plant names. The phytonyms for comparison were mostly obtained from dictionaries and other publications, and supplemented with data from databases, the co-authors' field data, and archival sources (dialect and folklore materials). More than 1200 phytonym use records (combinations of a local name and a meaning) for 364 plant and fungal taxa were recorded to help find out the reasoning behind bear-nomination in various languages, as well as differences and similarities between the patterns among them. Among the most common taxa with bear-related phytonyms were Arctostaphylos uva-ursi (L.) Spreng., Heracleum sphondylium L., Acanthus mollis L., and Allium ursinum L., with Latin loan translation contributing a high proportion of the phytonyms. Some plants have many and various bear-related phytonyms, while others have only one or two bear names. Features like form and/or surface generated the richest pool of names, while such features as colour seemed to provoke rather few associations with bears. The unevenness of bear phytonyms in the chosen languages was not related to the size of the language nor the present occurence of the Brown Bear in the region. However, this may, at least to certain extent, be related to the amount of the historical ethnolinguistic research done on the selected languages.

  14. Gas Foil Bearing Misalignment and Unbalance Effects

    Science.gov (United States)

    Howard, Samuel A.

    2008-01-01

    The effects of misalignment and unbalance on gas foil bearings are presented. The future of U.S. space exploration includes plans to conduct science missions aboard space vehicles, return humans to the Moon, and place humans on Mars. All of these endeavors are of long duration, and require high amounts of electrical power for propulsion, life support, mission operations, etc. One potential source of electrical power of sufficient magnitude and duration is a nuclear-fission-based system. The system architecture would consist of a nuclear reactor heat source with the resulting thermal energy converted to electrical energy through a dynamic power conversion and heat rejection system. Various types of power conversion systems can be utilized, but the Closed Brayton Cycle (CBC) turboalternator is one of the leading candidates. In the CBC, an inert gas heated by the reactor drives a turboalternator, rejects excess heat to space through a heat exchanger, and returns to the reactor in a closed loop configuration. The use of the CBC for space power and propulsion is described in more detail in the literature (Mason, 2003). In the CBC system just described, the process fluid is a high pressure inert gas such as argon, krypton, or a helium-xenon mixture. Due to the closed loop nature of the system and the associated potential for damage to components in the system, contamination of the working fluid is intolerable. Since a potential source of contamination is the lubricant used in conventional turbomachinery bearings, Gas Foil Bearings (GFB) have high potential for the rotor support system. GFBs are compliant, hydrodynamic journal and thrust bearings that use a gas, such as the CBC working fluid, as their lubricant. Thus, GFBs eliminate the possibility of contamination due to lubricant leaks into the closed loop system. Gas foil bearings are currently used in many commercial applications, both terrestrial and aerospace. Aircraft Air Cycle Machines (ACMs) and ground

  15. Thin Dense Chrome Bearing Insertion Program

    National Research Council Canada - National Science Library

    Rhoads, Mark

    1997-01-01

    .... TDC coated bearings demonstrated improved corrosion and contamination resistance. TDC coated bearings also demonstrated acceptable performance during thermal cycle, oil-off, and induced defect conditions...

  16. Legislative vulnerability of minority groups.

    Science.gov (United States)

    Paula, Carlos Eduardo Artiaga; Silva, Ana Paula da; Bittar, Cléria Maria Lôbo

    2017-12-01

    Minorities are in an inferior position in society and therefore vulnerable in many aspects. This study analyzes legislative vulnerability and aims to categorize as "weak" or "strong" the protection conferred by law to the following minorities: elderly, disabled, LGBT, Indians, women, children/ adolescents and black people. In order to do so, it was developed a documental research in 30 federal laws in which legal provisions were searched to protect minorities. Next, the articles were organized in the following categories: civil, criminal, administrative, labor and procedural, to be analyzed afterwards. Legal protection was considered "strong" when there were legal provisions that observed the five categories and "weak" when it did not meet this criterion. It was noted that six groups have "strong" legislative protection, which elides the assertion that minorities are outside the law. The exception is the LGBT group, whose legislative protection is weak. In addition, consecrating rights through laws strengthens the institutional channels for minorities to demand their rights. Finally, it was observed that the legislative protection granted tominorities is not homogeneous but rather discriminatory, and there is an interference by the majority group in the rights regulation of vulnerable groups.

  17. Minors and Sexting: Legal Implications.

    Science.gov (United States)

    Lorang, Melissa R; McNiel, Dale E; Binder, Renée L

    2016-03-01

    Sexting is the sending or forwarding of sexually explicit photographs or videos of the sender or someone known to the sender via cell phone. It has become common practice among young people, as cell phones are being given to adolescents at ever younger ages. Youths often send messages without giving appropriate thought to the content of the images. In studies on the subject, rates of minors who have sent sexual images range from 4 to 25 percent, depending on the age of the youths surveyed, the content of the messages and other factors. Because transferring and viewing sexually explicit material when the subject is a minor can be considered child pornography, there can be serious legal consequences. Several states have enacted legislation to help differentiate between child pornography and sexting by minors. The trend reflected in statutes has been that minors involved in sexting without other exacerbating circumstances should be charged with a less serious offense. There is no clear national consensus on how sexting by minors is adjudicated, and therefore we compared several statutes. Case examples are used to illustrate the range of legal outcomes, from felony charges to no charges. Two sexting episodes that were followed by suicide are described. We also address the role of the forensic mental health professional. © 2016 American Academy of Psychiatry and the Law.

  18. Mixed-mu superconducting bearings

    Science.gov (United States)

    Hull, John R.; Mulcahy, Thomas M.

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  19. Dictionary of minor planet names

    CERN Document Server

    Schmadel, Lutz D

    1997-01-01

    Until recently, minor planet name citations were scattered in the astronomical literature, and the origin of many names remained obscure In 1988 the IAU Commission 20 established a study group to elucidate the meanings of asteroid names Later on the author continued in collecting and indexing all new relevant data This book contains the names, and their meanings, of all - as yet 5252 - named minor planets It informs about the discoverers as well as the circumstances of the discovery of all 7041 minor planets that were numbered up to June 1996 In addition to being of practical value for identification purposes, the collection provides a most interesting historical insight into the work of those astronomers who over two centuries vested their affinities in a rich and colourful variety of ingenious names, from heavenly goddesses to more prosaic constructions This third, revised and enlarged edition comprises about 40% more information than was provided with the first one of 1992

  20. DNA minor groove alkylating agents.

    Science.gov (United States)

    Denny, W A

    2001-04-01

    Recent work on a number of different classes of anticancer agents that alkylate DNA in the minor groove is reviewed. There has been much work with nitrogen mustards, where attachment of the mustard unit to carrier molecules can change the normal patterns of both regio- and sequence-selectivity, from reaction primarily at most guanine N7 sites in the major groove to a few adenine N3 sites at the 3'-end of poly(A/T) sequences in the minor groove. Carrier molecules discussed for mustards are intercalators, polypyrroles, polyimidazoles, bis(benzimidazoles), polybenzamides and anilinoquinolinium salts. In contrast, similar targeting of pyrrolizidine alkylators by a variety of carriers has little effect of their patterns of alkylation (at the 2-amino group of guanine). Recent work on the pyrrolobenzodiazepine and cyclopropaindolone classes of natural product minor groove binders is also reviewed.

  1. Simplified installation of thrust bearings

    Science.gov (United States)

    Sensenbaugh, N. D.

    1980-01-01

    Special handling sleeve, key to method of installing thrust bearings, was developed for assembling bearings on shaft of low-pressure oxygen turbo-pump. Method eliminates cooling and vacuum-drying steps which saves time, while also eliminating possibility of corrosion formation. Procedure saves energy because it requires no liquid nitrogen for cooling shaft and no natural gas or electric power for operating vacuum oven.

  2. Lateral dampers for thrust bearings

    Science.gov (United States)

    Hibner, D. H.; Szafir, D. R.

    1985-01-01

    The development of lateral damping schemes for thrust bearings was examined, ranking their applicability to various engine classes, selecting the best concept for each engine class and performing an in-depth evaluation. Five major engine classes were considered: large transport, military, small general aviation, turboshaft, and non-manrated. Damper concepts developed for evaluation were: curved beam, constrained and unconstrained elastomer, hybrid boost bearing, hydraulic thrust piston, conical squeeze film, and rolling element thrust face.

  3. 40 CFR 152.404 - Fee amounts.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Fee amounts. 152.404 Section 152.404 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS PESTICIDE REGISTRATION AND CLASSIFICATION PROCEDURES Registration Fees § 152.404 Fee amounts. The fee prescribed by the...

  4. 20 CFR 617.34 - Amount.

    Science.gov (United States)

    2010-04-01

    ... the Federal travel regulations (see 41 CFR part 101-7) for the locality where the job search is... WORKERS UNDER THE TRADE ACT OF 1974 Job Search Allowances § 617.34 Amount. (a) Computation. The amount of a job search allowance shall be 90 percent of the total costs of each of the following allowable...

  5. Happiness and Sexual Minority Status.

    Science.gov (United States)

    Thomeer, Mieke Beth; Reczek, Corinne

    2016-10-01

    We used logistic regression on nationally representative data (General Social Survey, N = 10,668 and N = 6680) to examine how sexual minority status related to happiness. We considered two central dimensions of sexual minority status-sexual behavior and sexual identity. We distinguished between same-sex, both-sex, and different-sex-oriented participants. Because individuals transition between sexual behavior categories over the life course (e.g., from both-sex partners to only same-sex partners) and changes in sexual minority status have theoretical associations with well-being, we also tested the associations of transitions with happiness. Results showed that identifying as bisexual, gay, or lesbian, having both male and female partners since age 18, or transitioning to only different-sex partners was negatively related to happiness. Those with only same-sex partners since age 18 or in the past 5 years had similar levels of happiness as those with only different-sex partners since age 18. Additional tests showed that the majority of these happiness differences became non-significant when economic and social resources were included, indicating that the lower happiness was a product of structural and societal forces. Our findings clearly and robustly underscored the importance of taking a multi-faceted approach to understanding sexuality and well-being, demonstrating that not all sexual minority groups experience disadvantaged happiness. Our study calls for more attention to positive aspects of well-being such as happiness in examinations of sexual minorities and suggests that positive psychology and other happiness subfields should consider the role of sexual minority status in shaping happiness.

  6. The Willink Minority Commission and minority rights in Nigeria ...

    African Journals Online (AJOL)

    In the alternative, they demanded for constitutional safeguards as guarantees against their potential domination by majority ethnic groups in an independent Nigeria. In 1957, the colonial government convoked a commission to ascertain the facts, and thereupon, recommend measures of allaying the fears of minority ethnic ...

  7. Radial magnetic bearings: An overview

    Directory of Open Access Journals (Sweden)

    Weiyu Zhang

    Full Text Available Radial magnetic bearings (RMBs are one of the most commonly used magnetic bearings. They are used widely in the field of ultra-high speed and ultra-precise numerical control machine tools, bearingless motors, high speed flywheels, artificial heart pumps, and molecular pumps, and they are being strengthened and extended in various important areas. In this paper, a comprehensive overview is given of different bearing topologies of RMBs with different stator poles that differ in their construction, the driving mode of electromagnets, power consumption, cost, magnetic circuits, and symmetry. RMBs with different poles and couplings between the two bearing axes in the radial direction responsible for cross-coupling generation are compared. In addition, different shaped rotors are compared, as the performances of magnetic bearing-rotor systems are of great concern to rotor constructions. Furthermore, the parameter design methods, the mathematical models and control strategies of the RMBs are described in detail. From the comparison of topologies, models and control methods for RMBs, the advantages, disadvantages and utilizable perspectives are also analyzed. Moreover, several possible development trends of the RMBs are discussed. Keywords: Radial magnetic bearings (RMBs, Topologies, Mathematical mode, Control strategies, Development trends

  8. Millisecond bearing wear

    International Nuclear Information System (INIS)

    Blatchley, C.; Sioshansi, P.

    1987-01-01

    Radionuclides have been widely used for many purposes in medicine, metals, transportation, manufacturing and research. Approximately 200 artificially produced nuclides are commercially available from reactors or accelerator sources. Another 400 or so have properties which may make them useful if satisfactory methods of production can be developed. One of the most economically important industrial applications of radionuclides has been in wear measurement and condition monitoring in reciprocating engines. The general techniques developed for this purpose have also been applied in a number of other areas besides engine or lubrication studies. The wear of floor wax applied to linoleum, for example, has been measured by mixing shortlived radionuclides in the wax. In those applications where the material is tagged and then followed, the radionuclides are termed ''tracers,'' similar to the medical tracer materials used to measure uptake or metabolism of biologically active chemicals in the body. The alternate function for the radionuclides is to act as ''markers'' which indicate the amount of material which is remaining at the location of the original activation. Both approaches require that the debris removed from the surface must be carried away from the original site. The first application of radioactive tracers as a diagnostic tool in engines was in 1949. In this technique, an entire wearing part such as a piston ring or gear was first exposed to neutrons in a nuclear reactor. This caused the entire volume of the part to become radioactive. The part was next installed and exposed to wear in the operating engine. Detectors placed near the oil line, an oil filter or a sediment trap then determined the amount of debris from the part by counting the gamma rays escaping from the debris

  9. The evolutionary history of bears is characterized by gene flow across species.

    Science.gov (United States)

    Kumar, Vikas; Lammers, Fritjof; Bidon, Tobias; Pfenninger, Markus; Kolter, Lydia; Nilsson, Maria A; Janke, Axel

    2017-04-19

    Bears are iconic mammals with a complex evolutionary history. Natural bear hybrids and studies of few nuclear genes indicate that gene flow among bears may be more common than expected and not limited to polar and brown bears. Here we present a genome analysis of the bear family with representatives of all living species. Phylogenomic analyses of 869 mega base pairs divided into 18,621 genome fragments yielded a well-resolved coalescent species tree despite signals for extensive gene flow across species. However, genome analyses using different statistical methods show that gene flow is not limited to closely related species pairs. Strong ancestral gene flow between the Asiatic black bear and the ancestor to polar, brown and American black bear explains uncertainties in reconstructing the bear phylogeny. Gene flow across the bear clade may be mediated by intermediate species such as the geographically wide-spread brown bears leading to large amounts of phylogenetic conflict. Genome-scale analyses lead to a more complete understanding of complex evolutionary processes. Evidence for extensive inter-specific gene flow, found also in other animal species, necessitates shifting the attention from speciation processes achieving genome-wide reproductive isolation to the selective processes that maintain species divergence in the face of gene flow.

  10. The evolutionary history of bears is characterized by gene flow across species

    Science.gov (United States)

    Kumar, Vikas; Lammers, Fritjof; Bidon, Tobias; Pfenninger, Markus; Kolter, Lydia; Nilsson, Maria A.; Janke, Axel

    2017-01-01

    Bears are iconic mammals with a complex evolutionary history. Natural bear hybrids and studies of few nuclear genes indicate that gene flow among bears may be more common than expected and not limited to polar and brown bears. Here we present a genome analysis of the bear family with representatives of all living species. Phylogenomic analyses of 869 mega base pairs divided into 18,621 genome fragments yielded a well-resolved coalescent species tree despite signals for extensive gene flow across species. However, genome analyses using different statistical methods show that gene flow is not limited to closely related species pairs. Strong ancestral gene flow between the Asiatic black bear and the ancestor to polar, brown and American black bear explains uncertainties in reconstructing the bear phylogeny. Gene flow across the bear clade may be mediated by intermediate species such as the geographically wide-spread brown bears leading to large amounts of phylogenetic conflict. Genome-scale analyses lead to a more complete understanding of complex evolutionary processes. Evidence for extensive inter-specific gene flow, found also in other animal species, necessitates shifting the attention from speciation processes achieving genome-wide reproductive isolation to the selective processes that maintain species divergence in the face of gene flow. PMID:28422140

  11. Can polar bears use terrestrial foods to offset lost ice-based hunting opportunities?

    Science.gov (United States)

    Rode, Karyn D.; Robbins, Charles T.; Nelson, Lynne; Amstrup, Steven C.

    2015-01-01

    Increased land use by polar bears (Ursus maritimus) due to climate-change-induced reduction of their sea-ice habitat illustrates the impact of climate change on species distributions and the difficulty of conserving a large, highly specialized carnivore in the face of this global threat. Some authors have suggested that terrestrial food consumption by polar bears will help them withstand sea-ice loss as they are forced to spend increasing amounts of time on land. Here, we evaluate the nutritional needs of polar bears as well as the physiological and environmental constraints that shape their use of terrestrial ecosystems. Only small numbers of polar bears have been documented consuming terrestrial foods even in modest quantities. Over much of the polar bear's range, limited terrestrial food availability supports only low densities of much smaller, resident brown bears (Ursus arctos), which use low-quality resources more efficiently and may compete with polar bears in these areas. Where consumption of terrestrial foods has been documented, polar bear body condition and survival rates have declined even as land use has increased. Thus far, observed consumption of terrestrial food by polar bears has been insufficient to offset lost ice-based hunting opportunities but can have ecological consequences for other species. Warming-induced loss of sea ice remains the primary threat faced by polar bears.

  12. Minority Student Progress Report, 1991.

    Science.gov (United States)

    Diaz, Porfirio R.; Luan, Jing

    This report offers a consolidated systemwide analysis of key issues and recommendations for improvement of minority recruitment and retention at Arizona State Universities and an evaluation of progress toward achieving Arizona Board of Regents (ABOR) approved recruitment and graduation goals. A description of ABOR system goals notes three goals:…

  13. Minority game with SK interactions

    International Nuclear Information System (INIS)

    Menezes, Pedro Castro; Sherrington, David

    2013-01-01

    A batch minority game with fake random history and additional SK-like quenched interaction is introduced and analysed. A mixing parameter λ quantifies the admixture and dictates the relative dominance of the two contributions: if λ → 0, agent decisions are based on their strategies and point-scores alone, as in the pure minority game, whereas for λ > 0 the agents also communicate with each other directly and update their points accordingly. Keeping the minority game dynamics in which the agents’ points are updated in parallel at each time step, the aim is to understand what happens if instead of simply using the normal strategy-based decisions, the agents also take account of an ‘effective field’ generated by the other agents. It is shown that the SK interaction introduces a ‘noise’ term which is broader than that in the normal minority game and which furthermore kills the normal phase transition. It is also shown that the same effect would occur if, instead of an SK interaction, Gaussian-distributed quenched random fields are added. By calculating order parameters in the time-translational invariant phase we show that the system is persistent in a ergodic phase. Both simulational and analytical results are presented. (paper)

  14. Tobacco Use among Sexual Minorities

    Science.gov (United States)

    Bryant, Lawrence O.; Bowman, Lorenzo

    2014-01-01

    This chapter addresses tobacco use among sexual minorities. It examines research on the prevalence of tobacco use in the lesbian, gay, bisexual, and transgender (LGBT) community and discusses why tobacco use within this group continues to significantly exceed that of the general population.

  15. Children of ethnic minority backgrounds

    DEFF Research Database (Denmark)

    Johansen, Stine Liv

    2010-01-01

    Children of ethnic minority background balance their everyday life between a cultural background rooted in their ethnic origin and a daily life in day care, schools and with peers that is founded in a majority culture. This means, among other things, that they often will have access to different ...

  16. Internet alcohol sales to minors.

    Science.gov (United States)

    Williams, Rebecca S; Ribisl, Kurt M

    2012-09-01

    OBJECTIVES To determine whether minors can successfully purchase alcohol online and to examine age verification procedures at the points of order and delivery. DESIGN A cross-sectional study evaluated underage alcohol purchase attempts from 100 popular Internet vendors. SETTING The study was conducted at the University of North Carolina at Chapel Hill, July 14-27, 2011. PARTICIPANTS Eight 18- to 20-year-old individuals participated. OUTCOME MEASURES Rates of successful sales to minors and use of age verification procedures at order and delivery were determined. RESULTS Of the 100 orders placed by the underage buyers, 45% were successfully received; 28% were rejected as the result of age verification. Most vendors (59%) used weak, if any, age verification at the point of order, and, of 45 successful orders, 23 (51%) used none. Age verification at delivery was inconsistently conducted and, when attempted, failed about half of the time. CONCLUSIONS Age verification procedures used by Internet alcohol vendors do not adequately prevent online sales to minors. Shipping companies should work with their staff to improve administration of age verification at delivery, and vendors should use rigorous age verification at order and delivery. Further research should determine the proportion of minors who buy alcohol online and test purchases from more vendors to inform enforcement of existing policies and creation of new policies to reduce youth access to alcohol online.

  17. Young ethnic minorities in education

    DEFF Research Database (Denmark)

    Mørck, Line Lerche

    2007-01-01

    and transcend negative social categories about a ‘Muslim school girl' as ‘isolated and oppressed' and ‘too studios'. [1] I use the term ethnic minority, not as a distinction with numerical proportions, but rather related to societal power relations (Phoenix, 2001). In that way the Danish Palestinian pupils...

  18. Phoenix type concepts for transmutation of LWR waste minor actinides

    International Nuclear Information System (INIS)

    Segev, M.

    1994-01-01

    A number of variations on the original Phoenix theme were studied. The basic rationale of the Phoenix incinerator is making oxide fuel of the LWR waste minor actinides, loading it in an FFTF-like subcritical core, then bombarding the core with the high current beam accelerated protons to generate considerable energy through spallation and fission reactions. As originally assessed, if the machine is fed with 1600 MeV protons in a 102 mA current, then 8 core modules are driven to transmute the yearly minor actinides waste of 75 1000 MW LWRs into Pu 238 and fission products; in a 2 years cycle the energy extracted is 100000 MW d/T. This performance cannot be substantiated in a rigorous analysis. A calculational consistent methodology, based on a combined execution of the Hermes, NCNP, and Korigen codes, shows, nonetheless that changes in the original Phoenix parameters can upgrade its performance.The original Phoenix contains 26 tons minor actinides in 8 core modules; 1.15 m 3 module is shaped for 40% neutron leakage; with a beam of 102 mA the 8 modules are driven to 100000 MW/T in 10.5 years, burning out the yearly minor actinide waste of 15 LWRs; the operation must be assisted by grid electricity. If the 1.15 m 3 module is shaped to allow only 28% leakage, then a beam of 102 mA will drive the 8 modules to 100000 MW/T in 3.5 years, burning out the yearly minor actinides waste of 45 LWRs. Some net grid electricity will be generated. If 25 tons minor actinides are loaded into 5 modules, each 1.72 m 3 in volume and of 24% leakage, then a 97 mA beam will drive the module to 100000 MW/T in 2.5 years, burning out the yearly minor actinides waste of 70 LWRs. A considerable amount of net grid electricity will be generated. If the lattice is made of metal fuel, and 26 tons minor actinides are loaded into 32 small modules, 0.17 m 3 each, then a 102 mA beam will drive the modules to 100000 MW/T in 2 years, burning out the yearly minor actinides waste of 72 LWRs. A considerable

  19. 36 CFR 13.1236 - Bear orientation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear Orientation. Failure to receive an NPS-approved Bear Orientation is prohibited. ...

  20. 49 CFR 229.69 - Side bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Side bearings. 229.69 Section 229.69....69 Side bearings. (a) Friction side bearings with springs designed to carry weight may not have more than 25 percent of the springs in any one nest broken. (b) Friction side bearings may not be run in...

  1. Heuristic Explanation of Journal Bearing Instability

    Science.gov (United States)

    1982-05-01

    A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small...other simple explanations of journal - bearing instability. It is shown that for non-cavitating long bearings the hypothesis predicts instability onset

  2. Trace amount analysis using spark mass spectrometry

    International Nuclear Information System (INIS)

    Stefani, Rene

    1975-01-01

    Characteristics of spark mass spectrometers (ion source, properties of the ion beam, ion optics, and performance) and their use in qualitative and quantitative analysis are described. This technique is very interesting for the semi-quantitative analysis of trace amounts, down to 10 -8 atoms. Examples of applications such as the analysis of high purity materials and non-conducting mineral samples, and determination of carbon and gas trace amounts are presented. (50 references) [fr

  3. Superconductor bearings, flywheels and transportation

    Science.gov (United States)

    Werfel, F. N.; Floegel-Delor, U.; Rothfeld, R.; Riedel, T.; Goebel, B.; Wippich, D.; Schirrmeister, P.

    2012-01-01

    This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS-FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN2. More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

  4. Lubrication of sliding bearings for hydropower applications

    OpenAIRE

    McCarthy, Donald

    2005-01-01

    The term "sliding bearing" refers to types of bearing where two conformal surfaces (usually the stationary bearing and a moving shaft) slide relative to one another with load distributed directly across the interface. A suitable lubricant may be employed to reduce the friction between these two surfaces. In "fluid film" bearings, this lubricant builds up a layer of sufficient thickness such that the two surfaces are completely separated. Examples include journal and thrust bearings and shaft ...

  5. The Weight-Bearing Shoulder.

    Science.gov (United States)

    Patel, Ronak M; Gelber, Jonathan D; Schickendantz, Mark S

    2018-01-01

    The shoulder achieves a wide spectrum of motion, and in a subset of patients, including those who use manual wheelchairs and upper extremity walking aids, the shoulder also serves as the primary weight-bearing joint. Because the weight-bearing shoulder is subject to considerable joint reaction forces and overuse, a broad spectrum of pathology can affect the joint. The combination of muscle imbalance and repetitive trauma presents most commonly as subacromial impingement syndrome but can progress to other pathology. Patients with high-level spinal cord injury, leading to quadriplegia and motor deficits, have an increased incidence of shoulder pain. Understanding the needs of patients who use manual wheelchairs or walking aids can help the physician to better comprehend the pathology of and better manage the weight-bearing shoulder.

  6. 29 CFR 4219.14 - Amount of liability for 20-year-limitation amounts.

    Science.gov (United States)

    2010-07-01

    ... amount equal to the present value of all initial withdrawal liability payments for which the employer was not liable pursuant to section 4219(c)(1)(B) of ERISA. The present value of such payments shall be... 29 Labor 9 2010-07-01 2010-07-01 false Amount of liability for 20-year-limitation amounts. 4219.14...

  7. Principal minors and rhombus tilings

    International Nuclear Information System (INIS)

    Kenyon, Richard; Pemantle, Robin

    2014-01-01

    The algebraic relations between the principal minors of a generic n × n matrix are somewhat mysterious, see e.g. Lin and Sturmfels (2009 J. Algebra 322 4121–31). We show, however, that by adding in certain almost principal minors, the ideal of relations is generated by translations of a single relation, the so-called hexahedron relation, which is a composition of six cluster mutations. We give in particular a Laurent-polynomial parameterization of the space of n × n matrices, whose parameters consist of certain principal and almost principal minors. The parameters naturally live on vertices and faces of the tiles in a rhombus tiling of a convex 2n-gon. A matrix is associated to an equivalence class of tilings, all related to each other by Yang–Baxter-like transformations. By specializing the initial data we can similarly parameterize the space of Hermitian symmetric matrices over R,C or H the quaternions. Moreover by further specialization we can parametrize the space of positive definite matrices over these rings. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Cluster algebras mathematical physics’. (paper)

  8. Wave Journal Bearing. Part 1: Analysis

    Science.gov (United States)

    Dimofte, Florin

    1995-01-01

    A wave journal bearing concept features a waved inner bearing diameter of the non-rotating bearing side and it is an alternative to the plain journal bearing. The wave journal bearing has a significantly increased load capacity in comparison to the plain journal bearing operating at the same eccentricity. It also offers greater stability than the plain circular bearing under all operating conditions. The wave bearing's design is relatively simple and allows the shaft to rotate in either direction. Three wave bearings are sensitive to the direction of an applied stationary side load. Increasing the number of waves reduces the wave bearing's sensitivity to the direction of the applied load relative to the wave. However, the range in which the bearing performance can be varied decreases as the number of waves increases. Therefore, both the number and the amplitude of the waves must be properly selected to optimize the wave bearing design for a specific application. It is concluded that the stiffness of an air journal bearing, due to hydrodynamic effect, could be doubled and made to run stably by using a six or eight wave geometry with a wave amplitude approximately half of the bearing radial clearance.

  9. EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis

    Science.gov (United States)

    Žvokelj, Matej; Zupan, Samo; Prebil, Ivan

    2016-05-01

    A novel multivariate and multiscale statistical process monitoring method is proposed with the aim of detecting incipient failures in large slewing bearings, where subjective influence plays a minor role. The proposed method integrates the strengths of the Independent Component Analysis (ICA) multivariate monitoring approach with the benefits of Ensemble Empirical Mode Decomposition (EEMD), which adaptively decomposes signals into different time scales and can thus cope with multiscale system dynamics. The method, which was named EEMD-based multiscale ICA (EEMD-MSICA), not only enables bearing fault detection but also offers a mechanism of multivariate signal denoising and, in combination with the Envelope Analysis (EA), a diagnostic tool. The multiscale nature of the proposed approach makes the method convenient to cope with data which emanate from bearings in complex real-world rotating machinery and frequently represent the cumulative effect of many underlying phenomena occupying different regions in the time-frequency plane. The efficiency of the proposed method was tested on simulated as well as real vibration and Acoustic Emission (AE) signals obtained through conducting an accelerated run-to-failure lifetime experiment on a purpose-built laboratory slewing bearing test stand. The ability to detect and locate the early-stage rolling-sliding contact fatigue failure of the bearing indicates that AE and vibration signals carry sufficient information on the bearing condition and that the developed EEMD-MSICA method is able to effectively extract it, thereby representing a reliable bearing fault detection and diagnosis strategy.

  10. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears

    OpenAIRE

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-01-01

    © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd. Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we...

  11. Identification of functional corridors with movement characteristics of brown bears on the Kenai Peninsula, Alaska

    Science.gov (United States)

    Graves, T.A.; Farley, S.; Goldstein, M.I.; Servheen, C.

    2007-01-01

    We identified primary habitat and functional corridors across a landscape using Global Positioning System (GPS) collar locations of brown bears (Ursus arctos). After deriving density, speed, and angular deviation of movement, we classified landscape function for a group of animals with a cluster analysis. We described areas with high amounts of sinuous movement as primary habitat patches and areas with high amounts of very directional, fast movement as highly functional bear corridors. The time between bear locations and scale of analysis influenced the number and size of corridors identified. Bear locations should be collected at intervals ???6 h to correctly identify travel corridors. Our corridor identification technique will help managers move beyond the theoretical discussion of corridors and linkage zones to active management of landscape features that will preserve connectivity. ?? 2007 Springer Science+Business Media, Inc.

  12. Satellite monitoring of black bear.

    Science.gov (United States)

    Craighead, J. J.; Craighead, F. C., Jr.; Varney, J. R.; Cote, C. E.

    1971-01-01

    Description of a feasibility experiment recently performed to test the use of a satellite system for telemetering environmental and physiological data from the winter den of a 'hibernating' black bear, Ursus americanus. The instrumentation procedure and evaluations of the equipment performance and sensory data obtained are discussed in detail.

  13. Little Bear Fire Summary Report

    Science.gov (United States)

    Sarah McCaffrey; Melanie Stidham; Hannah. Brenkert-Smith

    2013-01-01

    In June 2012, immediately after the Little Bear Fire burned outside Ruidoso, New Mexico, a team of researchers interviewed fire managers, local personnel, and residents to understand perceptions of the event itself, communication, evacuation, and pre-fire preparedness. The intensity of fire behavior and resulting loss of 242 homes made this a complex fire with a...

  14. BEAR AT THE BACK DOOR

    African Journals Online (AJOL)

    BEAR AT THE BACK DOOR. Deur generaal sir Walter Walker KCB, CBE,. D80. 8andton. Uitgegee deur Valiant Publis- hers. Verskyningsdatum Julie 1978. Prys R10.) Hierdie boek is 'n uitstekende aktuele geskrif ook. Suidelike Afrika se politieke en militere aspekte wat deur 'n a/gehele buitestaander nl 'n Britse. Generaal ...

  15. Physician Fee Schedule National Payment Amount File

    Data.gov (United States)

    U.S. Department of Health & Human Services — The significant size of the Physician Fee Schedule Payment Amount File-National requires that database programs (e.g., Access, dBase, FoxPro, etc.) be used to read...

  16. 13 CFR 120.930 - Amount.

    Science.gov (United States)

    2010-01-01

    ... percent of total Project cost plus 100 percent of eligible administrative costs. For good cause shown, SBA... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Amount. 120.930 Section 120.930 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Development Company Loan...

  17. 33 CFR 135.203 - Amount required.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

  18. Climate Change, Polar Bears and their management

    OpenAIRE

    Derenchenko, Liza

    2010-01-01

    This is a literature study of polar bears in the context of climate change: what kind of creatures are polar bears, what are the main interpretations of current climate change, how might the polar bear adapt to these changes (feeding strategies) and how are the bears being managed (hunting)? These are relevant questions , since climate change is on the agenda, and polar bears being the apex predators of the Arctic are a key representation of the wildlife there. The third element of polar bear...

  19. Clinical Trials Shed Light on Minority Health

    Science.gov (United States)

    ... Minority Health HHS Office of Minority Health Related Consumer Updates The FDA Supports Research to Reduce Health Disparities FDA Broadens Its ... Events Training & Continuing Education Inspections & Compliance Federal, State & Local Officials ... Health Professionals Science & Research Industry Scroll back to ...

  20. Several particular aspects of hydrostatic shaft guide bearings in mechanical liquid sodium pumps

    International Nuclear Information System (INIS)

    Elie, X.

    A number of problems arise with immersed hydrostatic shaft guide bearings in sodium pumps, mainly at high-temperature operation. Experience has shown that a substantial bearing clearance is required which, in present designs, takes a considerable amount of fluid from the pumps. A new design is suggested, resulting in a very appreciable reduction in the additional flow requirement, while maintaining a comparable load capacity by a hydrodynamic effect

  1. Bearing and Swelling Properties of Randomly Distributed Waste Jute Reinforced Soil

    OpenAIRE

    Ozturk, Murat; Cabalar, Ali Fırat

    2017-01-01

    In this study, waste jute, which was provided from textile companies, was investigated to define effect of waste jute on swelling and bearing behavior of the sand used. Three different water content (17, 19 and 21%) and four different waste jute addition amount at different percentages (0, 1, 2, and 3) by mass of dry soil were selected as design variables. With defined variables Swelling Ratio and California Bearing Ratio (CBR) tests were conducted. According to test results it is concluded t...

  2. Cortisol levels in hair of East Greenland polar bears.

    Science.gov (United States)

    Bechshøft, T Ø; Sonne, C; Dietz, R; Born, E W; Novak, M A; Henchey, E; Meyer, J S

    2011-01-15

    To demonstrate the ability to assess long-term hypothalamic-pituitary-adrenocortical (HPA) axis activity in polar bears (Ursus maritimus), a pilot study was conducted in which cortisol concentrations was analyzed in hair from 7 female (3-19 years) and 10 male (6-19 years) East Greenland polar bears sampled in 1994-2006. The hair was chosen as matrix as it is non-invasive, seasonally harmonized, and has been validated as an index of long-term changes in cortisol levels. The samples were categorized according to contamination: eight were clean (2 females, 6 males), 5 had been contaminated with bear blood (2 F, 3 M), and 4 with bear fat (3 F, 1 M). There was no significant difference in cortisol concentration between the three categories after external contamination was removed. However, contaminated hair samples should be cleaned before cortisol determination. Average hair cortisol concentration was 8.90 pg/mg (range: 5.5 to 16.4 pg/mg). There was no significant correlation between cortisol concentration and age (p=0.81) or sampling year (p=0.11). However, females had higher mean cortisol concentration than males (females mean: 11.0 pg/mg, males: 7.3 pg/mg; p=0.01). The study showed that polar bear hair contains measurable amounts of cortisol and that cortisol in hair may be used in studies of long-term stress in polar bears. Copyright © 2010 Elsevier B.V. All rights reserved.

  3. Shape memory alloy wire-based smart natural rubber bearing

    International Nuclear Information System (INIS)

    Hedayati Dezfuli, F; Shahria Alam, M

    2013-01-01

    In this study, two types of smart elastomeric bearings are presented using shape memory alloy (SMA) wires. Due to the unique characteristics of SMAs, such as the superelastic effect and the recentering capability, the residual deformation in SMA-based natural rubber bearings (SMA-NRBs) is significantly reduced whereas the energy dissipation capacity is increased. Two different configurations of SMA wires incorporated in elastomeric bearings are considered. The effect of several parameters, including the shear strain amplitude, the type of SMA, the aspect ratio of the base isolator, the thickness of SMA wire, and the amount of pre-strain in the wires on the performance of SMA-NRBs is investigated. Rubber bearings are composed of natural rubber layers bonded to steel shims as reinforcement. Results show that ferrous SMA wire, FeNiCuAlTaB, with 13.5% superelastic strain and a very low austenite finish temperature (−62 °C), is the best candidate to be used in SMA-NRBs subjected to high shear strain amplitudes. In terms of the lateral flexibility and wire strain level, the smart rubber bearing with a cross configuration of SMA wires is more efficient. Moreover, the cross configuration can be implemented in high-aspect-ratio elastomeric bearings since the strain induced in the wire does not exceed the superelastic range. When cross SMA wires with 2% pre-strain are used in a smart NRB, the dissipated energy is increased by 74% and the residual deformation is decreased by 15%. (paper)

  4. Minority students benefit from mentoring programs.

    Science.gov (United States)

    Cullen, D L; Rodak, B; Fitzgerald, N; Baker, S

    1993-01-01

    Mentoring has been proposed as one strategy to attract minority students to the radiologic sciences profession. This case study describes a minority mentoring program conducted for pre-radiologic science students at a Midwestern university during the 1991-92 academic year. Ten minority radiologic science students enrolled in the mentoring program. The study showed that mentoring may be a viable option to serve the special needs of minorities for recruitment and retention.

  5. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  6. 7 CFR 795.12 - Minor children.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Minor children. 795.12 Section 795.12 Agriculture... PROVISIONS COMMON TO MORE THAN ONE PROGRAM PAYMENT LIMITATION General § 795.12 Minor children. (a) A minor child and his parents or guardian (or other person responsible for him) shall be considered as one...

  7. Majoritarian tyranny in a world of minorities

    NARCIS (Netherlands)

    M.A.R.M. Salih (Mohamed)

    2000-01-01

    textabstractDespite the political upheavals, conflicts, war and genocide generated by unequal and unjust minority-majority relations, the term minority people entered social science terminology for the first time in 19321 • According to Davis (1979: 2), minority studies were initially largely

  8. 75 FR 81395 - Minority and Women Inclusion

    Science.gov (United States)

    2010-12-28

    ... 2590-AA28 Minority and Women Inclusion AGENCIES: Federal Housing Finance Board; Federal Housing Finance... and the inclusion of women and minorities in all activities. The final rule implements the provisions.... It also requires each regulated entity to establish an Office of Minority and Women Inclusion, or...

  9. 75 FR 10446 - Minority and Women Inclusion

    Science.gov (United States)

    2010-03-08

    ... 2590-AA28 Minority and Women Inclusion AGENCIES: Federal Housing Finance Board; Federal Housing Finance... minority and women inclusion. Section 1116 of the Housing and Economic Recovery Act of 2008 amended section... Loan Banks to promote diversity and the inclusion of women and minorities in all activities...

  10. The Minority Game : An Economics Perspective

    NARCIS (Netherlands)

    Kets, W.

    2007-01-01

    This paper gives a critical account of the minority game literature. The minority game is a simple congestion game: players need to choose between two options, and those who have selected the option chosen by the minority win. The learning model proposed in this literature seems to differ markedly

  11. Gleanings: The Minority Student Success Project.

    Science.gov (United States)

    Smith, Barbara Leigh; MacGregor, Jean

    The Minority Student Success Project (MSSP) initiated in 1989 was designed to improve the recruitment and retention of minority students on campuses in the state of Washington. The results of a questionnaire on minority students administered to all of Washington's community colleges, and data from follow-up interviews, were used to design working…

  12. Ethnic Minority Problems in the Niger Delta

    African Journals Online (AJOL)

    As a conceptual background typical types of minorities and typical sources of minority conflict are outlined. A historical overview is given of the problems. Niger Delta minorities have been experiencing. Their grievances and demands are highlighted, and the responses of different Nigerian governments are discussed.

  13. 14 CFR 152.419 - Minority business.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Minority business. 152.419 Section 152.419... AIRPORT AID PROGRAM Nondiscrimination in Airport Aid Program § 152.419 Minority business. Each person subject to this subpart is required to comply with the Minority Business Enterprise Regulations of the...

  14. Migrant and Ethnic Minority Health

    DEFF Research Database (Denmark)

    Essink-Bot, Marie-Louise; Agyemang, Charles; Stronks, Karien

    2015-01-01

    in health related to migration and ethnicity. Thereto we will first define the concepts of migration and ethnicity, briefly review the various groups of migrants and ethnic minorities in Europe, and introduce a conceptual model that specifies the link and causal pathways between ethnicity and health....... Then we use the example of ethnic inequalities in cardiovascular disease and diabetes to illustrate the conceptual model. The second issue concerns the potential contribution from the health-care system to minimize the ethnic inequalities in health. As a public health sector, we should do all we can...

  15. Sunflower: A potential fructan-bearing crop?

    Directory of Open Access Journals (Sweden)

    Giselle eMartinez-Noel

    2015-10-01

    Full Text Available Grain filling in sunflower (Helianthus annuus L. mainly depends on actual photosynthesis, being the contribution of stored reserves in stems (sucrose, hexoses and starch rather low. Drought periods during grain filling often reduce yield. Increasing the capacity of stem to store reserves could help to increase grain filling and yield stability in dry years. Fructans improve water uptake in soils at low water potential, and allow the storage of large amount of assimilates per unit tissue volume that can be readily remobilized to grains. Sunflower is a close relative to Jerusalem artichoke (Helianthus tuberosus L., which accumulates large amounts of fructan (inulin in tubers and true stems. The reason why sunflower does not accumulate fructans is obscure. Through a bioinformatics analysis of a sunflower transcriptome database, we found sequences that are homologous to dicotyledon and monocotyledon fructan synthesis genes. A HPLC analysis of stem sugar composition revealed the presence of low amounts of 1-kestose, while a drastic enhancement of endogenous sucrose levels by capitulum removal did not promote 1-kestose accumulation. This suggests that the regulation of fructan synthesis in this species may differ from the currently best known model, mainly derived from research on Poaceae, where sucrose acts as both a signaling molecule and substrate, in the induction of fructan synthesis. Thus, sunflower might potentially constitute a fructan-bearing species, which could result in an improvement of its performance as a grain crop. However, a large effort is needed to elucidate how this up to now unsuspected potential could be effectively

  16. Dynamics of gas-thrust bearings

    Science.gov (United States)

    Stiffler, A. K.; Tapia, R. R.

    1978-01-01

    Computer program calculates load coefficients, up to third harmonic, for hydrostatic gas thrust bearings. Program is useful in identification of industrial situations where gas-thrust bearings have potential applications.

  17. Rolling Element Bearing Stiffness Matrix Determination (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Parker, R.

    2014-01-01

    Current theoretical bearing models differ in their stiffness estimates because of different model assumptions. In this study, a finite element/contact mechanics model is developed for rolling element bearings with the focus of obtaining accurate bearing stiffness for a wide range of bearing types and parameters. A combined surface integral and finite element method is used to solve for the contact mechanics between the rolling elements and races. This model captures the time-dependent characteristics of the bearing contact due to the orbital motion of the rolling elements. A numerical method is developed to determine the full bearing stiffness matrix corresponding to two radial, one axial, and two angular coordinates; the rotation about the shaft axis is free by design. This proposed stiffness determination method is validated against experiments in the literature and compared to existing analytical models and widely used advanced computational methods. The fully-populated stiffness matrix demonstrates the coupling between bearing radial, axial, and tilting bearing deflections.

  18. Amplification of trace amounts of nucleic acids

    Science.gov (United States)

    Church, George M [Brookline, MA; Zhang, Kun [Brighton, MA

    2008-06-17

    Methods of reducing background during amplification of small amounts of nucleic acids employ careful analysis of sources of low level contamination. Ultraviolet light can be used to reduce nucleic acid contaminants in reagents and equipment. "Primer-dimer" background can be reduced by judicious design of primers. We have shown clean signal-to-noise with as little as starting material as one single human cell (.about.6 picogram), E. coli cell (.about.5 femtogram) or Prochlorococcus cell (.about.3 femtogram).

  19. Radiculography with reduced amounts of contrast medium

    International Nuclear Information System (INIS)

    Signorini, E.; Caputo, N.; Chiurulla, C.; Ciorba, E.; Pelliccioli, G.P.; Cianciulli, E.

    1984-01-01

    Because of the frequency and seriousness of side effects observed after radiculography, due to, among the other things, the amount of contrast medium, the authors describe a method that gives diagnostically satisfactory results using a low dose of contrast and a tangent-beam technique. Among 106 patients undergoing radiculography with a tangent-beam technique and Iopamidol, only 4 developed mild side effects, namely headache in three cases and headache with nausea in one. (Author)

  20. [Food habits and hunting patterns of Tibetan brown bear during warm seasons in Kekexili region on Qinghai-Tibetan Plateau].

    Science.gov (United States)

    Xu, Ai-Chun; Jiang, Zhi-Gang; Li, Chun-Wang; Cai, Ping

    2010-12-01

    Tibetan brown bear (Ursus arctos pruinosus) is an endemic subspecies of brown bear on the Qinghai-Tibetan plateau. We once reported a preliminary study on the summer food habit of Tibetan brown bear from July to August, 2005 in the Kekexili (Hoh Xil).. However, the hunting modes of the Tibetan brawn bear have not been reported. From July to August, 2009, we collected additional data on food habits and hunting patterns of Tibetan brown bear in the Kekexili region. We found Tibetan brown bears are more raptatorial than vegetarian, and their basal food was plateau pika (Ochotona curzoniae), relative frequency occurrence of pika in the fecal residual of brawn bear was 37.3%, dry weight of pika residuals was 44.7%, respectively, followed by wild yak (Bos grunniens) , 18.7% and 30.2%, and Tibetan antelope (Pantholops hodgsoni) 15.0% and 16.2%. Both prey actively mode and scavenge mode were used by Tibetan brown bears in Kekexili. Tibetan brawn bears actively dug and hunted for pika and scavenged bodies of wild yak, Tibetan antelope and Tibetan gazelle. We observed that Tibetan brawn bears spent about 10% of their time to dig and to hunt for pika but we had never seen Tibetan brawn bears actively hunted large mammals such as wild yak, Tibetan antelope and Tibetan gazelle. The total amount of Tibetan antelope, Tibetan gazelle and wild yak ingested by Tibetan brown bear through scavenge was about the same amount of Plateau pika and Himalayan marmot (Marmota himalayana) eaten by the bear.

  1. Mercury in polar bears from Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Lentfer, J.W.; Galster, W.A.

    1987-04-01

    Alaskan polar bear (Ursus maritimus) muscle and liver samples collected in 1972 were analyzed for total mercury. Bears north of Alaska had more mercury than bears west of Alaska. The only difference between young and adult animals was in the northern area where adults had more mercury in liver tissue than young animals. Levels were probably not high enough to be a serious threat to bears.

  2. Technology development for indigenous water lubricated bearings

    International Nuclear Information System (INIS)

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2010-01-01

    Water Lubricated Bearings (WLB) are used in various mechanisms of fuel handling systems of PHWRs and AHWR. Availability and random failures of these bearings was a major factor in refuelling operations. Indigenous development of these bearings was taken up and 7 types of antifriction bearings in various sizes (totaling 37 variants) for PHWR, AHWR and Dhruva applications were successfully developed. This paper deals with various aspects of WLB development. (author)

  3. Minor lipophilic compounds in edible insects

    Directory of Open Access Journals (Sweden)

    Monika Sabolová

    2016-07-01

    Full Text Available Contemporary society is faced with the question how to ensure suffiecient nutrition (quantity and quality for rapidly growing population. One solution can be consumption of edible insect, which can have very good nutritional value (dietary energy, protein, fatty acids, fibers, dietary minerals and vitamins composition. Some edible insects species, which contains a relatively large amount of fat, can have a potential to be a „good" (interesting, new source of minor lipophilic compounds such as sterols (cholesterol and phytosterols and tocopherols in our diet. For this reason, the objective of this work was to characterize the sterols and tocopherols composition of fat from larvae of edible insect Zophobas morio L. and Tenebrio mollitor L. Cholesterol and three phytosterols (campesterol, stigmasterol and β-sitosterol were reliably identified and quantified after hot saponification and derivatization by GC-MS. Other steroid compounds, including 5,6-trans-cholecalciferol were identified only according to the NIST library. Cholesterol was the predominant sterol in all analysed samples. Both types of larvae also contained high amount of phytosterols. Different region of origin had a no significant impact on sterols composition, while the effect of beetle genus was crucial. Tocopherols were analysed by reverse phase HPLC coupled with amperometric detection. Tocopherols content in mealworm larvae was lower than content in edible oils, but important from the nutritional point of view. Change of tocopherols composition was not observed during the storage under different conditions. Larvae of edible insect can be a potential good dietary source of cholesterol, but also vitamin D3 isomers, phytosterols and tocopherols.  

  4. Performance characteristics in hydrodynamic water cooled thrust bearings

    Directory of Open Access Journals (Sweden)

    Farooq Ahmad Najar

    2016-09-01

    Full Text Available This paper deals with the study of the influence on performance characteristics of a thrust bearing with the introduction of cooling circuit and flow velocity of coolant within the designed thrust bearings is described. New method of cooling circuit configuration is taken into consideration and water has been chosen as a coolant here in the present work. Flow velocity of coolant, ranging from 0.5m/s to 2.0m/s is proposed. The Finite difference based numerical model has been developed in order to notice the effect on the heat transfer on a large hydrodynamic lubrication thrust bearing in-terms of its performance characteristics. In the present work, the solution of Reynolds equation, an energy equation with viscosity variation and Fourier heat conduction equations, applied with appropriate boundary conditions. From the present investigation, it is observed significant amount of heat content is removed from the bearing with the increase of flow velocity of coolant in an embedded cooling duct within the pad. An important parameter among performance characteristics has prevailed a significant increase in hydrodynamic pressure generation which in turn subsequently increases the load carrying capacity which has been never ever documented in the background literature.

  5. Workplace harassment: double jeopardy for minority women.

    Science.gov (United States)

    Berdahl, Jennifer L; Moore, Celia

    2006-03-01

    To date there have been no studies of how both sex and ethnicity might affect the incidence of both sexual and ethnic harassment at work. This article represents an effort to fill this gap. Data from employees at 5 organizations were used to test whether minority women are subject to double jeopardy at work, experiencing the most harassment because they are both women and members of a minority group. The results supported this prediction. Women experienced more sexual harassment than men, minorities experienced more ethnic harassment than Whites, and minority women experienced more harassment overall than majority men, minority men, and majority women.

  6. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  7. Passive Thermal Management of Foil Bearings

    Science.gov (United States)

    Bruckner, Robert J. (Inventor)

    2015-01-01

    Systems and methods for passive thermal management of foil bearing systems are disclosed herein. The flow of the hydrodynamic film across the surface of bearing compliant foils may be disrupted to provide passive cooling and to improve the performance and reliability of the foil bearing system.

  8. 49 CFR 229.64 - Plain bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Plain bearings. 229.64 Section 229.64 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION....64 Plain bearings. A plain bearing box shall contain visible free oil and may not be cracked to the...

  9. Cool Polar Bears: Dabbing on the Texture

    Science.gov (United States)

    O'Connell, Jean

    2011-01-01

    In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

  10. Hydrodynamic squeeze-film bearings for gyroscopes

    Science.gov (United States)

    Chiang, T.; Smith, R. L.

    1970-01-01

    Experimental tests are conducted on squeeze-film bearings by applying electricity to piezoelectric ceramics, causing vibrations at thousands or millions of Hz that are amplified and transmitted to the bearing. Rotor operation through 24,000 rpm without whirl instability proved bearing ability to support rotor weight without hydrodynamic action.

  11. 14 CFR 23.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 23.623 Section 23.623... Bearing factors. (a) Each part that has clearance (free fit), and that is subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of normal relative motion. (b) For...

  12. 14 CFR 25.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 25.623 Section 25.623... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  13. 14 CFR 27.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 27.623 Section 27.623... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  14. 14 CFR 29.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 29.623 Section 29.623... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.623 Bearing factors. (a... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  15. Fractal analysis of polar bear hairs

    Directory of Open Access Journals (Sweden)

    Wang Qing-Li

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

  16. Microstructural degradation of bearing steels

    OpenAIRE

    Solano Alvarez, Wilberth

    2015-01-01

    The aim of the work presented in this thesis is to clarify one of the most fundamental aspects of fatigue damage in bearings steels through critical experiments, in particular whether damage in the form of cracks precedes hard “white-etching matter" formation, which is carbon supersaturated nanoscaled ferrite. Heat treatments have been designed to create four different crack types and distributions: scarce martensite plate cracks, fine grain boundary cracks, abundant martensite plate cracks, ...

  17. Utilisation of acoustic emission technique to monitor lubrication condition in a low speed bearing

    International Nuclear Information System (INIS)

    Nordin Jamaludin; Mohd Jailani Mohd Nor

    2003-01-01

    Monitoring of lubrication condition in rolling element bearings through the use of vibration analysis is an established technique. However, this success has not mirrored at low rotational speeds. At low speeds the energy generated from the poor lubricated bearing lubrication might not show as an obvious change in signature and thus become undetectable using conventional vibration measuring equipment. This paper presents an investigation into the applicability of acoustic emission technique and analysis for detecting poorly lubricated bearing rotating at a speed of 1.12 rpm. Investigations were centered on a test-rig designed to simulate the real bearing used in the field. The variation of lubricant amount in the low-speed bearing was successfully monitored using a new developed method known as pulse injection technique (PIT). The PIT technique was based on acoustic emission method. The technique involved transmitting a Dirac pulse to the test bearing via a transmitting acoustic emission sensor while the bearing was in operation. Analysing the captured acoustic emission signatures using established statistical method could differentiate between properly and poorly lubricated bearing. (Author)

  18. Production and measurement of minor actinides in the commercial fuel cycle

    International Nuclear Information System (INIS)

    Stanbro, W.D.

    1997-03-01

    The minor actinide elements, particularly neptunium and americium, are produced as a normal byproduct of the operation of thermal power reactors. Because of the existence of long-lived isotopes of these elements, they constitute the major sources of the residual radiation in spent fuel or in wastes resulting from reprocessing. This has led to examinations by some countries of the possibility of separating the minor actinides from waste products. The papers found in this report address the production of minor actinides in common thermal power reactors as well as approaches to measure these materials in various media. The first paper in this volume, open-quotes Production of Minor Actinides in the Commercial Fuel Cycle,close quotes uses calculations with the ORIGEN2 reactor and decay code to estimate the amounts of minor actinides in spent fuel and separated plutonium as a function of reactor irradiation and the time after discharge. The second paper, open-quotes Destructive Assay of Minor Actinides,close quotes describes a number of promising approaches for the chemical analysis of minor actinides in the various forms in which they are found at reprocessing plants. The next paper, open-quotes Hybrid KED/XRF Measurement of Minor Actinides in Reprocessing Plants,close quotes uses the results of a simulation model to examine the possible applications of the hybrid KED/XRF instrument to the determination of minor actinides in some of the solutions found in reprocessing plants. In open-quotes Calorimetric Assay of Minor Actinides,close quotes the authors show some possible extensions of this powerful technique beyond the normal plutonium assays to include the minor actinides. Finally, the last paper in this volume, open-quotes Environment Measurements of Transuranic Nuclides,close quotes discusses what is known about the levels of the minor actinides in the environment and ways to analyze for these materials in environmental matrices

  19. Scaling laws for radial foil bearings

    Science.gov (United States)

    Honavara Prasad, Srikanth

    The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

  20. Coalitions in the quantum Minority game: Classical cheats and quantum bullies

    International Nuclear Information System (INIS)

    Flitney, Adrian P.; Greentree, Andrew D.

    2007-01-01

    In a one-off Minority game, when a group of players agree to collaborate they gain an advantage over the remaining players. We consider the advantage obtained in a quantum Minority game by a coalition sharing an initially entangled state versus that obtained by a coalition that uses classical communication to arrive at an optimal group strategy. In a model of the quantum Minority game where the final measurement basis is randomized, quantum coalitions outperform classical ones when carried out by up to four players, but an unrestricted amount of classical communication is better for larger coalition sizes

  1. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff...... bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas...... the liner has practically no influence on the flexure journal bearing's performance....

  2. Bearing/Bypass Material-Testing System

    Science.gov (United States)

    Crews, John H., Jr.

    1988-01-01

    System developed to test specimens in compression as well as tension while maintaining constant bearing/bypass ration. Test specimen with centrally located hole is clamped between two bearing-guide plates using one bolt. Bearing-guide plates then secured to two bearing-load cells. Test specimen independently loaded at both ends, using two separate control systems identified as applied and bypass. If two end loads unequal, difference between them reacted as bolt-bearing load on specimen. Throughout test, two control systems synchronized by common input signal (increasing voltage). As result, loads remain proportional as they increase.

  3. [Advances in studies on bear bile powder].

    Science.gov (United States)

    Zhou, Chao-fan; Gao, Guo-jian; Liu, Ying

    2015-04-01

    In this paper, a detailed analysis was made on relevant literatures about bear bile powder in terms of chemical component, pharmacological effect and clinical efficacy, indicating bear bile powder's significant pharmacological effects and clinical application in treating various diseases. Due to the complex composition, bear bile powder is relatively toxic. Therefore, efforts shall be made to study bear bile powder's pharmacological effects, clinical application, chemical composition and toxic side-effects, with the aim to provide a scientific basis for widespread reasonable clinical application of bear bile powder.

  4. Valve assembly having remotely replaceable bearings

    International Nuclear Information System (INIS)

    Johnson, E.R.; Tanner, D.E.

    1980-01-01

    A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings

  5. A motor with superconducting magnetic bearings

    International Nuclear Information System (INIS)

    Gladun, A.; Stoye, P.; Verges, P.; Gawalek, W.; Habisreuther, T.; Goernert, P.

    1993-01-01

    Superconducting bearings may be one of the most promising near term applications of HTSC. For use at liquid nitrogen temperature and below, they offer the advantage of lower energy consumption and higher reliability. Different bearing configurations have been proposed. But in order to substitute for conventional bearings a further increase in the critical current density of the superconductor and improved bearing concepts are necessary. For this it is necessary to take into account the peculiarities of the interaction between permanent magnets and bulk superconductors. As a contribution to this programme we present the model of a motor with superconducting magnetic bearings. (orig.)

  6. Heuristic explanation of journal bearing instability

    Science.gov (United States)

    Crandall, S. H.

    1982-01-01

    A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small whirling motion of the journal generates a wave of thickness variation progressing around the channel. The hypothesis that the fluid flow drives the whirl whenever the mean of the pumped fluid velocity is greater than the peripheral speed of the thickness variation wave is discussed and compared with other simple explanations of journal bearing instability. It is shown that for non-cavitation long bearings the hypothesis predicts instability onset correctly for unloaded bearings but gradually overpredicts the onset speed as the load is increased.

  7. A reliability approach to machine tool bearings

    International Nuclear Information System (INIS)

    Jia Yazhou; Shen Guixiang; Jia Zhixin

    1995-01-01

    Based on the machine tool working characteristics, a method to determine the bearing dynamic load rating with a specified reliability is presented. Unlike the conventional methods for machine tool bearing design which are almost empirical, the proposed method is based on the bearing fatigue reliability. Also, unlike the common design methods of other industrial bearings which cannot consider the machine tool peculiarity, the obtained method is based on power and torque characteristics of machine tools. Designing the machine tool bearings by use of the method can obtain the expected reliability

  8. Ball Bearing Analysis with the ORBIS Tool

    Science.gov (United States)

    Halpin, Jacob D.

    2016-01-01

    Ball bearing design is critical to the success of aerospace mechanisms. Key bearing performance parameters, such as load capability, stiffness, torque, and life all depend on accurate determination of the internal load distribution. Hence, a good analytical bearing tool that provides both comprehensive capabilities and reliable results becomes a significant asset to the engineer. This paper introduces the ORBIS bearing tool. A discussion of key modeling assumptions and a technical overview is provided. Numerous validation studies and case studies using the ORBIS tool are presented. All results suggest the ORBIS code closely correlates to predictions on bearing internal load distributions, stiffness, deflection and stresses.

  9. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    OpenAIRE

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and...

  10. Coupled Dynamics of a Rotor-Journal Bearing System Equipped with Thrust Bearings

    OpenAIRE

    Yu Lie; R.B. Bhat

    1995-01-01

    The rotordynamic coefficients of fixed-pad thrust bearing are introduced and calculated by using the out-domain method, and a general analysis method is developed to investigate the coupled dynamics of a rotor equipped with journal and thrust bearings simultaneously. Considerations include the effects of static tilt parameters of the rotor on rotordynamic coefficients of thrust bearing and the action of thrust bearing on system dynamics. It is shown that thrust bearing changes the load distri...

  11. Chromatographic (TLC) differentiation of grizzly bear and black bear scats

    Science.gov (United States)

    Picton, Harold D.; Kendall, Katherine C.

    1994-01-01

    While past work concluded that thin-layer chromatography (TLC) was inadequate for the separation of grizzly (Ursus arctos horribilis) and black bear (U. americanus) scats, our study found differences adequate for species separation. A key was constructed using 19 of 40 data points recorded on each(N)=356 profiles of 178) know-species scat. Accuracy was best for late summer scats (94%). Methods for specimen preparation, analysis, and reading the TLC profiles are discussed. Factors involved in scat variation were tested.

  12. Ethnic Minority-Majority Unions in Estonia.

    Science.gov (United States)

    van Ham, Maarten; Tammaru, Tiit

    2011-08-01

    Ethnic minority-majority unions-also referred to as mixed ethnic unions-are often seen as the ultimate evidence of the integration of ethnic minorities into their host societies. We investigated minority-majority unions in Estonia, where ethnic minorities account for one-third of the total population (Russians 26%, followed by Ukrainians, Byelorussians, Finns and other smaller groups). Using data from the 2000 Estonian census and regression models, we found that Slavic women are less likely to be in minority-majority unions than are members of other minority groups, with Russians being the least likely. Finns, who are culturally most similar to the Estonian majority population, are the most likely to form a union with an Estonian. For ethnic minority women, the likelihood of being in minority-majority unions is highest in rural areas and increases over generations, with third-generation immigrants being the most likely. Estonian women are most likely to have a minority partner when they or their parents were born abroad and when they live in urban areas. Our findings suggest that both the opportunity to meet potential partners and openness to other ethnic groups are important factors for understanding the dynamics of minority-majority unions.

  13. A prototype construction of bearing heater system

    International Nuclear Information System (INIS)

    Firman Silitonga

    2007-01-01

    A bearing heater system has been successfully constructed using transformer-like method of 1000 VA power, 220 V primary voltage, and 50 Hz electrical frequency. The bearing heater consists of primary coil 230 turns, U type and bar-type iron core with 36 cm 2 , 9 cm 2 ,and 3 cm 2 cross-section, and electrical isolation. The bearing heater is used to enlarge the diameter of the bearing so that it can be easily fixed on an electric motor shaft during replacement because the heating is conducted by treated the bearing as a secondary coil of a transformer. This bearing heater can be used for bearing with 3 and 6 cm of inner diameter and 12 cm of maximum outside diameter. (author)

  14. Noise of oil lubricated journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2002-01-01

    The purpose of the paper is to provide a procedure to calculate the noise of oil lubricated journal bearings. To do this, the nonlinear transient analysis of rotor-bearing system including rotor imbalance is performed. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Furthermore, a transmission theory of plane waves on a boundary of the outer surface of the bearing is used to obtain the sound pressure level of the bearing. Results show that the sound pressure level of the bearing can be increased with the rotational speed of the rotor although the whirl amplitude of the rotor is decreased at high speed. Noise estimating procedures presented in this paper could be an aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

  15. Evaluation of rotating, incompressibly lubricated, pressurized thrust bearings

    Science.gov (United States)

    Fleming, D. P.

    1971-01-01

    Program evaluates a series hybrid, fluid film ball bearing consisting of an orifice compensated pressurized thrust bearing in conjunction with a self-acting journal bearing. Oil viscosities corresponding to experimentally measured ball bearing outer-race temperatures were used.

  16. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

    Science.gov (United States)

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-03-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

  17. The EBR-II X501 Minor Actinide Burning Experiment

    Energy Technology Data Exchange (ETDEWEB)

    W. J. Carmack; M. K. Meyer; S. L. Hayes; H. Tsai

    2008-01-01

    The X501 experiment was conducted in EBR II as part of the Integral Fast Reactor program to demonstrate minor actinide burning through the use of a homogeneous recycle scheme. The X501 subassembly contained two metallic fuel elements loaded with relatively small quantities of americium and neptunium. Interest in the behavior of minor actinides (MA) during fuel irradiation has prompted further examination of existing X501 data and generation of new data where needed in support of the U.S. waste transmutation effort. The X501 experiment is one of the few MA bearing fuel irradiation tests conducted worldwide, and knowledge can be gained by understanding the changes in fuel behavior due to addition of MAs. Of primary interest are the effect of the MAs on fuel cladding chemical interaction and the redistribution behavior of americium. The quantity of helium gas release from the fuel and any effects of helium on fuel performance are also of interest. It must be stressed that information presented at this time is based on the limited PIE conducted in 1995–1996 and, currently, represents a set of observations rather than a complete understanding of fuel behavior. This report provides a summary of the X501 fabrication, characterization, irradiation, and post irradiation examination.

  18. Conditioning of alpha bearing wastes

    International Nuclear Information System (INIS)

    1991-01-01

    Alpha bearing wastes are generated during the reprocessing of spent fuel, mixed oxide fuel fabrication, decommissioning and other activities. The safe and effective management of these wastes is of particular importance owing to the radiotoxicity and long lived characteristics of certain transuranic (TRU) elements. The management of alpha bearing wastes involves a number of stages which include collection, characterization, segregation, treatment, conditioning, transport, storage and disposal. This report describes the currently available matrices and technologies for the conditioning of alpha wastes and relates them to their compatibility with the other stages of the waste management process. The selection of a specific immobilization process is dependent on the waste treatment state and the subsequent handling, transport, storage and disposal requirements. The overall objectives of immobilization are similar for all waste producers and processors, which are to produce: (a) Waste forms with sufficient mechanical, physical and chemical stability to satisfy all stages of handling, transport and storage (referred to as the short term requirements), and (b) Waste forms which will satisfy disposal requirements and inhibit the release of radionuclides to the biosphere (referred to as the long term requirements). Cement and bitumen processes have already been successfully applied to alpha waste conditioning on the industrial scale in many of the IAEA Member States. Cement systems based on BFS and pozzolanic cements have emerged as the principal encapsulation matrices for the full range of alpha bearing wastes. Alternative technologies, such as polymers and ceramics, are being developed for specific waste streams but are unlikely to meet widespread application owing to cost and process complexity. The merits of alpha waste conditioning are improved performance in transport, storage and disposal combined with enhanced public perception of waste management operations. These

  19. Precision magnetic suspension linear bearing

    Science.gov (United States)

    Trumper, David L.; Queen, Michael A.

    1992-01-01

    We have shown the design and analyzed the electromechanics of a linear motor suitable for independently controlling two suspension degrees of freedom. This motor, at least on paper, meets the requirements for driving an X-Y stage of 10 Kg mass with about 4 m/sq sec acceleration, with travel of several hundred millimeters in X and Y, and with reasonable power dissipation. A conceptual design for such a stage is presented. The theoretical feasibility of linear and planar bearings using single or multiple magnetic suspension linear motors is demonstrated.

  20. Minor actinides transmutation performance in a fast reactor

    International Nuclear Information System (INIS)

    Takeda, Toshikazu

    2016-01-01

    Highlights: • A method for calculating MA transmutation for individual nuclides has been proposed by introducing two formulas of the MA transmutation. One corresponds to the difference of MA amounts, and the other corresponds to the sum of the fission amounts and the plutonium production amounts. • Using the method the MA transmutation was calculated for Np-237 and Am-241 in a fast reactor. The burnup period was changed from 1 year to 12 year. • For the 1 year burnup a large amount of Am-242m, Cm-242 are produced from Am-241. The total MA transmutation amount increases with burnup time, but its gradient with respect to burnup time decreases after 9 years, and the transmutation amount by overall fission increases almost linearly with burnup time. • However, after the 6 year burnup the fission contribution became large because of the large production of Pu isotopes from the original Am-241. • In addition to the homogeneous loading of the MA nuclides into the cores, a heterogeneous loading of Am-241 to the blanket region was considered. - Abstract: Results obtained in the project named “Study on Minor Actinides Transmutation using Monju Data”, which has been sponsored by the Ministry of Education, Culture, Sports, Science and Technology in Japan (MEXT) are described. In order to physically understand transmutation of individual MA nuclides in fast reactors, a new method was developed in which the MAs transmutation is interpreted by two formulas. One corresponds to the difference of individual MA nuclides amounts before and after a burnup period, and the other is the sum of amount of fission of a relevant MA nuclide and the net plutonium production from the MA nuclide during a burnup period. The method has been applied to two fast reactors with MA fuels loaded in cores homogeneously and in a blanket region heterogeneously. Numerical results of MA transmutation for the two reactors are shown.

  1. Comparison of Alignment Correction Angles Between Fixed-Bearing and Mobile-Bearing UKA.

    Science.gov (United States)

    Inoue, Atsuo; Arai, Yuji; Nakagawa, Shuji; Inoue, Hiroaki; Yamazoe, Shoichi; Kubo, Toshikazu

    2016-01-01

    Good outcomes have been reported with both fixed-bearing and mobile-bearing unicompartmental knee arthroplasty (UKA). However, overcorrected alignment could induce the progression of arthritis on the non-arthroplasty side. Changes of limb alignment after UKA with both types of bearings (fixed bearing: 24 knees, mobile bearing: 28 knees) were investigated. The mean difference between the preoperative standing femoral-tibial angle (FTA) and postoperative standing FTA was significantly larger in mobile bearing UKA group. In fixed-bearing UKA, there must be some laxity in MCL tension so that a 2-mm tension gauge can be inserted. In mobile-bearing UKA, appropriate MCL tension is needed to prevent bearing dislocation. This difference in MCL tension may have caused the difference in the correction angle between the groups. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1991-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial-stress-shear-strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of FBR plants. It also discusses the protection method against aging and the quality control which are important for implementation. (orig./HP)

  3. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1989-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial stress-shear strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of fast breeder reactor (FBR) plants. The paper also discusses the protection method against aging and the quality control which are important for implementation

  4. Minority Serving Institutions Reporting System Database

    Data.gov (United States)

    Social Security Administration — The database will be used to track SSA's contributions to Minority Serving Institutions such as Historically Black Colleges and Universities (HBCU), Tribal Colleges...

  5. Individual metal-bearing particles in a regional haze caused by firecracker and firework emissions

    International Nuclear Information System (INIS)

    Li, Weijun; Shi, Zongbo; Yan, Chao; Yang, Lingxiao; Dong, Can; Wang, Wenxing

    2013-01-01

    Intensive firecracker/firework displays during Chinese New Year (CNY) release fine particles and gaseous pollutants into the atmosphere, which may lead to serious air pollution. We monitored ambient PM 2.5 and black carbon (BC) concentrations at a regional background site in the Yellow River Delta region during the CNY in 2011. Our monitoring data and MOUDI images showed that there was a haze event during the CNY. Daily average PM 2.5 concentration reached 183 μg m −3 during the CNY, which was six times higher than that before and after the CNY. Similarly, the black carbon (BC) concentrations were elevated during the CNY. In order to confirm whether the firecracker/firework related emission is the main source of the haze particles, we further analyzed the morphology and chemical composition of individual airborne particles collected before, during and after the CNY by using transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (TEM/EDS). We found that sulfate and organic-rich particles were dominant in the atmosphere before and after the CNY. In contrast, K-rich sulfates and other metal (e.g., Ba-rich, Al-rich, Mg-rich, and Fe-rich) particles were much more abundant than ammoniated sulfate particles during the CNY. These data suggest that it was the aerosol particles from the firecracker/firework emissions that induced the regional haze episode during the CNY. In individual organic and K-rich particles, we often found more than two types of nano-metal particles. These metal-bearing particles also contained abundant S but not Cl. In contrast, fresh metal-bearing particles from firecrackers generated in the laboratory contained abundant Cl with minor amounts of S. This indicates that the firecracker/firework emissions during the CNY significantly changed the atmospheric transformation pathway of SO 2 to sulfate. - Highlights: ► TEM was used to observe the aged individual particles from firecrackers/fireworks during the Chinese New

  6. Individual metal-bearing particles in a regional haze caused by firecracker and firework emissions

    Energy Technology Data Exchange (ETDEWEB)

    Li, Weijun, E-mail: liweijun@sdu.edu.cn [Environment Research Institute, Shandong University, Jinan, Shandong 250100 (China); State Key of Laboratory of Atmospheric Boundary Physics and Atmospheric Chemistry, Institute of Atmospheric Physics, Chinese Academy of Sciences, Beijing 100029 (China); Shi, Zongbo [School of Geography, Earth and Environmental Sciences, University of Birmingham (United Kingdom); Yan, Chao; Yang, Lingxiao; Dong, Can; Wang, Wenxing [Environment Research Institute, Shandong University, Jinan, Shandong 250100 (China)

    2013-01-15

    Intensive firecracker/firework displays during Chinese New Year (CNY) release fine particles and gaseous pollutants into the atmosphere, which may lead to serious air pollution. We monitored ambient PM{sub 2.5} and black carbon (BC) concentrations at a regional background site in the Yellow River Delta region during the CNY in 2011. Our monitoring data and MOUDI images showed that there was a haze event during the CNY. Daily average PM{sub 2.5} concentration reached 183 μg m{sup −3} during the CNY, which was six times higher than that before and after the CNY. Similarly, the black carbon (BC) concentrations were elevated during the CNY. In order to confirm whether the firecracker/firework related emission is the main source of the haze particles, we further analyzed the morphology and chemical composition of individual airborne particles collected before, during and after the CNY by using transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (TEM/EDS). We found that sulfate and organic-rich particles were dominant in the atmosphere before and after the CNY. In contrast, K-rich sulfates and other metal (e.g., Ba-rich, Al-rich, Mg-rich, and Fe-rich) particles were much more abundant than ammoniated sulfate particles during the CNY. These data suggest that it was the aerosol particles from the firecracker/firework emissions that induced the regional haze episode during the CNY. In individual organic and K-rich particles, we often found more than two types of nano-metal particles. These metal-bearing particles also contained abundant S but not Cl. In contrast, fresh metal-bearing particles from firecrackers generated in the laboratory contained abundant Cl with minor amounts of S. This indicates that the firecracker/firework emissions during the CNY significantly changed the atmospheric transformation pathway of SO{sub 2} to sulfate. - Highlights: ► TEM was used to observe the aged individual particles from firecrackers

  7. Hydrate-bearing Submarine Landslides in the Orca Basin, Gulf of Mexico

    Science.gov (United States)

    Sawyer, D.; Mason, A.; Cook, A.; Portnov, A.; Hillman, J.

    2017-12-01

    The co-occurrence of submarine landslides and hydrate-bearing sediment suggests that hydrates may play a role in landslide triggering and/or the mobility and dynamic characteristics of the submarine landslide. In turn, the removal of large sections of seafloor perturbs the hydrate stability field by removing overburden pressure and disturbing the temperature field. These potential hydrate-landslide feedbacks are not well understood. Here we combine three-dimensional seismic and petrophysical logs to characterize the deposits of submarine landslides that failed from hydrate-bearing sediments in the Orca Basin in the northern Gulf of Mexico. The Orca Basin contains a regionally mappable bottom simulating reflector, hydrate saturations within sands and muds, as well as numerous landslides. In addition, the Orca Basin features a well-known 123 km2 anoxic hypersaline brine pool that is actively being fed by outcropping salt. Lying at the bottom of the brine pool are deposits of submarine landslides. Slope instability in the Orca Basin is likely associated with near-seafloor salt tectonics. The most prominent landslide scar observable on the seafloor has a correlative deposit that now lies at the bottom of the brine pool 11.6 km away. The headwall is amphitheater-shaped with an average height of 80 meters and with only a minor amount of rubble remaining near the headwall. A total of 8.7 km3 of material was removed and deposited between the lower slopes of the basin and the base of the brine pool. Around the perimeter of the landslide headwall, two industry wells were drilled and well logs show elevated resistivity that are likely caused by gas hydrate. The slide deposits have a chaotic seismic facies with large entrained blocks and the headwall area does not retain much original material, which together suggests a relatively mobile style of landslide and therefore may have generated a wave upon impacting the brine pool. Such a slide-induced wave may have sloshed

  8. Non-linear journal bearing model for analysis of superharmonic vibrations of rotor systems

    Energy Technology Data Exchange (ETDEWEB)

    Hannukainen, P.

    2008-07-01

    A rotating machine usually consists of a rotor and bearings that supports it. The nonidealities in these components may excite vibration of the rotating system. The uncontrolled vibrations may lead to excessive wearing of the components of the rotating machine or reduce the process quality. Vibrations may be harmful even when amplitudes are seemingly low, as is usually the case in superharmonic vibration that takes place below the first critical speed of the rotating machine. Superharmonic vibration is excited when the rotational velocity of the machine is a fraction of the natural frequency of the system. In such a situation, a part of the machineAEs rotational energy is transformed into vibration energy. The amount of vibration energy should be minimised in the design of rotating machines. The superharmonic vibration phenomena can be studied by analysing the coupled rotor-bearing system employing a multibody simulation approach. This research is focused on the modelling of hydrodynamic journal bearings and rotorbearing systems supported by journal bearings. In particular, the non-idealities affecting the rotor-bearing system and their effect on the superharmonic vibration of the rotating system are analysed. A comparison of computationally efficient journal bearing models is carried out in order to validate one model for further development. The selected bearing model is improved in order to take the waviness of the shaft journal into account. The improved model is implemented and analyzed in a multibody simulation code. A rotor-bearing system that consists of a flexible tube roll, two journal bearings and a supporting structure is analysed employing the multibody simulation technique. The modelled non-idealities are the shell thickness variation in the tube roll and the waviness of the shaft journal in the bearing assembly. Both modelled non-idealities may cause subharmonic resonance in the system. In multibody simulation, the coupled effect of the non

  9. Old and New Minorities: Diversity Governance and Social Cohesion from the Perspective of Minority Rights

    Directory of Open Access Journals (Sweden)

    Medda-Windischer Roberta

    2017-09-01

    Full Text Available Minority rights instruments have been traditionally applied to old minority groups. This paper examines to what extent these same instruments are conceptually meaningful to the integration of new minorities stemming from migration. The conviction that minority groups, irrespective of their being old or new minorities, have some basic common claims that can be subsumed under a common definition does not mean that all minority groups have all the same rights and legitimate claims: some have only minimum rights, while others have or should be granted more substantial rights; some can legitimately put forward certain claims – not enforceable rights – that need to be negotiated with the majority, while others should not. In order to devise a common but differentiated set of rights and obligations for old and new minority groups, it is essential to analyse the differences and similarities of both categories of minorities, their claims, needs, and priorities; in this way, it will be possible to delineate a catalogue of rights that can be demanded by and granted to different minority groups. Studying the interaction between traditional minorities and migrants or old and new minority groups is a rather new task because so far these topics have been studied in isolation from each other. It is also an important task for future research in Europe since many states have established systems for the rights of old minorities but have not as yet developed sound policies for the integration of new minority groups stemming from migration.

  10. Coupled Dynamics of a Rotor-Journal Bearing System Equipped with Thrust Bearings

    Directory of Open Access Journals (Sweden)

    Yu Lie

    1995-01-01

    Full Text Available The rotordynamic coefficients of fixed-pad thrust bearing are introduced and calculated by using the out-domain method, and a general analysis method is developed to investigate the coupled dynamics of a rotor equipped with journal and thrust bearings simultaneously. Considerations include the effects of static tilt parameters of the rotor on rotordynamic coefficients of thrust bearing and the action of thrust bearing on system dynamics. It is shown that thrust bearing changes the load distribution of journal bearings and the static deflection of the rotor and delays the instability of the system considerably in lateral shaft vibration.

  11. The dual action gas thrust bearing - A new high load bearing concept

    Science.gov (United States)

    Etsion, I.

    1976-01-01

    The principle of utilizing hydrodynamic effects in diverging films for improving load capacity in gas thrust bearings is discussed. A new concept of dual action bearing based on that principle is described and analyzed. The potential of the new bearing is demonstrated both analytically for an infinitely long slider and by numerical solution for a flat sector shaped thrust bearing. It is shown that the dual action bearing can extend substantially the range of load carrying capacity in gas lubricated thrust bearings and improve their efficiency.

  12. Construction of gas suspended bearings (radial and axial gas ball bearings)

    International Nuclear Information System (INIS)

    Kaspar, G.

    1974-10-01

    This report contains practical and theoretical results that were obtained at IPP in the section of gas suspended bearings. The two air-cushioned, air-driven revolving mirrors and an air-cushioned, air measuring coil drive were built. The latter has a double radial bearing and a single axial bearing. The axial bearing is shaped in such a way that, with slight throttling of the air feed, i.e. at low air intake pressure, a relatively high bearing load can be imposed and the bearing remains at the same time free of the so-called air hammer effect. (orig.) [de

  13. Apparatus and method for magnetically unloading a rotor bearing

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, Seth Robert

    2018-02-13

    An apparatus and method for unloading a rotor bearing is described. The apparatus includes an electromagnet for levitating the rotor. In one embodiment, a sensor of the magnetic field near the electromagnet is used to control the current to levitate the rotor. In another embodiment, a method is provided that includes rotating the rotor, increasing the current to levitate the rotor and decrease the gap between electromagnet and rotor, and then reducing the current to levitate the rotor with a minimal amount of electric power to the electromagnet.

  14. Method of fabricating a uranium-bearing foil

    Science.gov (United States)

    Gooch, Jackie G [Seymour, TN; DeMint, Amy L [Kingston, TN

    2012-04-24

    Methods of fabricating a uranium-bearing foil are described. The foil may be substantially pure uranium, or may be a uranium alloy such as a uranium-molybdenum alloy. The method typically includes a series of hot rolling operations on a cast plate material to form a thin sheet. These hot rolling operations are typically performed using a process where each pass reduces the thickness of the plate by a substantially constant percentage. The sheet is typically then annealed and then cooled. The process typically concludes with a series of cold rolling passes where each pass reduces the thickness of the plate by a substantially constant thickness amount to form the foil.

  15. Effect of Roller Geometry on Roller Bearing Load-Life Relation

    Science.gov (United States)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2015-01-01

    Cylindrical roller bearings typically employ roller profile modification to equalize load distribution, minimize stress concentration at roller ends and allow for a small amount of misalignment. The 1947 Lundberg-Palmgren analysis reported an inverse fourth power relation between load and life for roller bearings with line contact. In 1952, Lundberg and Palmgren changed their load-life exponent to 10/3 for roller bearings, assuming mixed line and point contact. The effect of roller-crown profile was reanalyzed in this paper to determine the actual load-life relation for modified roller profiles. For uncrowned rollers (line contact), the load-life exponent is p = 4, in agreement with the 1947 Lundberg-Palmgren value but crowning reduces the value of the exponent, p. The lives of modern roller bearings made from vacuum-processed steels significantly exceed those predicted by the Lundberg-Palmgren theory. The Zaretsky rolling-element bearing life model of 1996 produces a load-life exponent of p = 5 for flat rollers, which is more consistent with test data. For the Zaretsky model with fully crowned rollers p = 4.3. For an aerospace profile and chamfered rollers, p = 4.6. Using the 1952 Lundberg-Palmgren value p = 10/3, the value incorporated in ANSI/ABMA and ISO bearing standards, can create significant life calculation errors for roller bearings.

  16. Selection Of High Performing Geometry In Flexure Bearings For Linear Compressor Applications Using Fea.

    Directory of Open Access Journals (Sweden)

    Fayaz H. Kharadi

    2015-01-01

    Full Text Available Abstract The word bearing comes from the verb to bear a bearing is thus a machine element that permits one part to bear another by allowing relative motion between them. A bearing is a machine element that constrains relative motion and reduces friction between moving parts to only the desired motion or it is a mechanical element which locates two machine parts relative to each other and permits a relative motion between them. Bearings are components that are used to reduce the amount of friction in a machine. The present work reported in this paper is specific to the selection of a bestgeometry among the selected geometries for flexure bearing used in linear compressor. This paper proposes FEM as tool to find the equivalent stress.Selection of geometry is one of the most important steps in the process of design. The best geometry is one which will serve the desired objective like performance and service life at minimum cost. The main objective of this paper is to investigate best geometry of flexure spring to enhance its performance and improve upon the life of the flexure of service. Performance of the flexure service life of the spring can be enhanced by achieving lower operating stresses and higher factor of safety.

  17. Influence of unbalance levels on nonlinear dynamics of a rotor-backup rolling bearing system

    Science.gov (United States)

    Fonseca, Cesar A.; Santos, Ilmar F.; Weber, Hans I.

    2017-04-01

    Rotor drops in magnetic bearing and unbalance in rotors have been objective of study for many years. The combination of these two well-known phenomena led to an interesting chaotic response, when the rotor touches the inner race of the back-up bearing. The present work explores the nonlinear rotor backup bearing dynamics both theoretically and experimentally using a fully instrumented test rig, where the position of shaft, its angular velocity and the contact forces between the shaft and the backup bearing are sampled at 25 kHz. The test rig is built by a removable passive magnetic bearing, which allows for simulation of magnetic bearing failure (loss of carrying capacity and rotor fall). The rotor is studied numerically as well as experimentally. A theoretical approach is given beforehand and supplies the basis of the study. Finally the presented results are commented on the point of view of nonlinear dynamics applied to the practical use. The theoretical and numerical analyses are shown through orbit plots, phase plans, Poincaré maps, force response in time and double sided spectrum. The latter is important to characterize the condition at different levels of unbalance between forward and backward whirl. Our preliminary results indicate that for smaller amount of unbalance the rotor swings at the bottom of the bearing, the more the unbalance increases, other dynamical behavior occur and some can be extremely harmful, since the rotor can be lifted from the contact state and return, starting to impact innumerable times without reaching a steady state.

  18. Conservation status of polar bears (Ursus maritimus) in relation to projected sea-ice declines

    Science.gov (United States)

    Laidre, K. L.; Regehr, E. V.; Akcakaya, H. R.; Amstrup, S. C.; Atwood, T.; Lunn, N.; Obbard, M.; Stern, H. L., III; Thiemann, G.; Wiig, O.

    2016-12-01

    Loss of Arctic sea ice due to climate change is the most serious threat to polar bears (Ursus maritimus) throughout their circumpolar range. We performed a data-based sensitivity analysis with respect to this threat by evaluating the potential response of the global polar bear population to projected sea-ice conditions. We conducted 1) an assessment of generation length for polar bears, 2) developed of a standardized sea-ice metric representing important habitat characteristics for the species; and 3) performed population projections over three generations, using computer simulation and statistical models representing alternative relationships between sea ice and polar bear abundance. Using three separate approaches, the median percent change in mean global population size for polar bears between 2015 and 2050 ranged from -4% (95% CI = -62%, 50%) to -43% (95% CI = -76%, -20%). Results highlight the potential for large reductions in the global population if sea-ice loss continues. They also highlight the large amount of uncertainty in statistical projections of polar bear abundance and the sensitivity of projections to plausible alternative assumptions. The median probability of a reduction in the mean global population size of polar bears greater than 30% over three generations was approximately 0.71 (range 0.20-0.95. The median probability of a reduction greater than 50% was approximately 0.07 (range 0-0.35), and the probability of a reduction greater than 80% was negligible.

  19. Electron beam melting of bearing materials

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmied, G.; Schuler, A. (Technische Univ., Vienna (Austria). Inst. fuer Allgemeine Elektrotechnik); Elsinger, G.; Koroschetz, F. (MIBA Gleitlager AG, Laakirchen (Austria)); Tschegg, E.K. (Technische Univ., Vienna (Austria). Inst. fuer Angewandte und Technische Physik)

    1990-06-01

    This paper reports on a surface treatment method for the bearing materials AlSn6 which permits the use of this material without the overlay usually required. Microstructural refinement is achieved by means of a surface melting technique using an electron beam with successive rapid solidification. Extremely fine tin precipitates are formed in the melted surface layer which lead to significantly better tribological properties of the bearing material. Tests compared the tribological properties for AlSn6 bearings treated by the surface melting technique with those of untreated bearings. Whereas all untreated bearings failed by seizure after only 2 h of testing, 30% of the tested bearings which had been surface melted survived the entire testing program without damage.

  20. Bearing Health Assessment Based on Chaotic Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Lu

    2013-01-01

    Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

  1. Are organohalogen contaminants a bears (Ursus maritimus)?

    DEFF Research Database (Denmark)

    Sonne, Christian; Dietz, Rune; Leifsson, PS

    2006-01-01

    Tissues of polar bears (Ursus maritimus) from East Greenland contain the highest concentrations of organohalogen contaminants (OHCs) among subpopulations of any mammalian species in the Arctic. Negative associations also have been found between OHC concentrations and bone mineral density and liver...... histology parameters for this subpopulation of polar bears. The present study examined the OHC concentrations and adverse effects on renal tissue for 75 polar bears collected during 1999 to 2002. Specific lesions were diffuse glomerular capillary wall thickening, mesangial glomerular deposits, tubular...

  2. Deterioration Assessment of Bridge Rubber Bearings

    OpenAIRE

    Gu, Haosheng; 伊藤, 義人; Itoh, Yoshito

    2005-01-01

    Natural rubber (NR) with lead plugs and high damping rubber (HDR) are often used for base-isolated rubber bearings. However, it is usually known that ageing causes rubber performance to drop. This research is to study the deterioration characteristics of these two kinds of bridge rubber bearings through accelerated thermal oxidation tests. The property variations inside the aged rubber blocks are investigated. For natural rubber bearing, the mechanical properties on the surface change the mos...

  3. BEARING TESTS FOR THE SPUR TURBOGENERATOR.

    Science.gov (United States)

    The results of the liquid-potassium journalbearing test program for the SPUR turbogenerator are presented. The activities described include the design, assembly and checkout of the bearing test rig, and the results of a successfully completed 250-h endurance test on a hydrodynamic journal bearing using 600 F liquid potassium as the lubricant. Unidirectional loads from 6 to 25 lbs were applied to the bearing operating at a speed of 24,000 rpm. (Author)

  4. Optimum Tolerance Design Using Component-Amount and Mixture-Amount Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.; Ozler, Cenk; Sehirlioglu, Ali Kemal

    2013-08-01

    One type of tolerance design problem involves optimizing component and assembly tolerances to minimize the total cost (sum of manufacturing cost and quality loss). Previous literature recommended using traditional response surface (RS) designs and models to solve this type of tolerance design problem. In this article, component-amount (CA) and mixture-amount (MA) approaches are proposed as more appropriate for solving this type of tolerance design problem. The advantages of the CA and MA approaches over the RS approach are discussed. Reasons for choosing between the CA and MA approaches are also discussed. The CA and MA approaches (experimental design, response modeling, and optimization) are illustrated using real examples.

  5. Methane Recovery from Hydrate-bearing Sediments

    Energy Technology Data Exchange (ETDEWEB)

    J. Carlos Santamarina; Costas Tsouris

    2011-04-30

    Gas hydrates are crystalline compounds made of gas and water molecules. Methane hydrates are found in marine sediments and permafrost regions; extensive amounts of methane are trapped in the form of hydrates. Methane hydrate can be an energy resource, contribute to global warming, or cause seafloor instability. This study placed emphasis on gas recovery from hydrate bearing sediments and related phenomena. The unique behavior of hydrate-bearing sediments required the development of special research tools, including new numerical algorithms (tube- and pore-network models) and experimental devices (high pressure chambers and micromodels). Therefore, the research methodology combined experimental studies, particle-scale numerical simulations, and macro-scale analyses of coupled processes. Research conducted as part of this project started with hydrate formation in sediment pores and extended to production methods and emergent phenomena. In particular, the scope of the work addressed: (1) hydrate formation and growth in pores, the assessment of formation rate, tensile/adhesive strength and their impact on sediment-scale properties, including volume change during hydrate formation and dissociation; (2) the effect of physical properties such as gas solubility, salinity, pore size, and mixed gas conditions on hydrate formation and dissociation, and it implications such as oscillatory transient hydrate formation, dissolution within the hydrate stability field, initial hydrate lens formation, and phase boundary changes in real field situations; (3) fluid conductivity in relation to pore size distribution and spatial correlation and the emergence of phenomena such as flow focusing; (4) mixed fluid flow, with special emphasis on differences between invading gas and nucleating gas, implications on relative gas conductivity for reservoir simulations, and gas recovery efficiency; (5) identification of advantages and limitations in different gas production strategies with

  6. 7 CFR 1400.101 - Minor children.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Minor children. 1400.101 Section 1400.101 Agriculture... SUBSEQUENT CROP, PROGRAM, OR FISCAL YEARS Payment Limitation § 1400.101 Minor children. (a) Except as provided in paragraph (b) of this section, payments received by a child under 18 years of age as of April 1...

  7. Minority Teacher Recruitment, Development, and Retention

    Science.gov (United States)

    Torres, Judith; Santos, Janet; Peck, Nancy L.; Cortes, Lydia

    2004-01-01

    When school systems began to desegregate after Brown v. Board of Education, 80 Per cent of the school population was white and 20 per cent was minority. By 1996, the number of minority students had risen to approximately 35 per cent of the student population, and today it stands at nearly 40 per cent and growing. These students continue to achieve…

  8. ETHNIC MINORITIES AND THE NIGERIAN STATE

    African Journals Online (AJOL)

    USER

    2014-09-02

    Sep 2, 2014 ... ethnic group or any other kind of group feels disenchanted with the political system. The three regions, the ... minorities in Nigeria does not lie in the lack of constitutional provision and protection of their basic ... Minority group constitutes the core of ethnic turbulence and violence world-wide. In a definition ...

  9. [Minor Uralic languages...] / Väino Klaus

    Index Scriptorium Estoniae

    Klaus, Väino, 1949-

    1998-01-01

    Arvustus: Minor Uralic languages and their contacts / University of Tartu ; editor A. Künnap. Tartu : University of Tartu, 1993 ; Minor Uralic languages: structure and development : [artikleid ja materjale / edited and preface by Ago Künnap]. Tartu : [Tartu University Press] ; Groningen : University of Groningen, 1994

  10. Sociolinguistic Minorities, Research, and Social Relationships

    Science.gov (United States)

    Garner, Mark; Raschka, Christine; Sercombe, Peter

    2006-01-01

    This paper suggests elements of an agenda for future sociolinguistics among minority groups, by seeing it as a mutual relationship that involves benefits to researcher and researched. We focus on two aspects of the relationship. One is the political, economic and social benefits that can accrue to a minority group as a result of the research.…

  11. Minority Teacher Recruitment and Retention Strategies

    Science.gov (United States)

    Kearney-Gissendaner, Janet E.

    2010-01-01

    The tools and resources in this book help school leaders seamlessly incorporate minority teacher recruitment and retention programs into current human-resources activities. With details about exemplary minority teacher recruitment and retention programs, this book also showcases strategies for how to replicate such programs in your own school or…

  12. Minor salivary gland tumours in Kaduna, Nigeria

    African Journals Online (AJOL)

    overall recurrcnce rate of 4.48%. Conclusion: Minor salivaiy gland tumours are rare. Follow-up in this environment is. 13001'. There is a need to educate the patients about the importance of early presentation and recall visits. Key worclsz Salivary glands, minor, tumour, treatment liitroduction. U f-;;i|i\\ar§, land tumours are ...

  13. 42 CFR 2.14 - Minor patients.

    Science.gov (United States)

    2010-10-01

    ... or drug abuse treatment, any written consent for disclosure authorized under subpart C of these... drug abuse treatment, any written consent for disclosure authorized under subpart C of these... ALCOHOL AND DRUG ABUSE PATIENT RECORDS General Provisions § 2.14 Minor patients. (a) Definition of minor...

  14. Experimental performance of 75-millimeter-bore arched outer-race ball bearings to 2.1 million DN. [thrust loads

    Science.gov (United States)

    Coe, H. H.

    1976-01-01

    An experimental investigation was performed to determine the operating characteristics of arched outer-race bearings and to compare the data with those for a similar, but conventional, deep-groove ball bearing. The bearings were tested over a range of shaft speeds up to 28,000 rpm at a thrust load of 2200 newtons (500 lb). One bearing was operated at 26,000 rpm with a range of thrust loads. The amounts of arching were 0.13, 0.25, and 0.51 millimeter (0.005, 0.010, and 0.020 in.). All bearings operated satisfactorily; the arched bearing outer-race temperatures and torques were consistently higher than those for the conventional bearing.

  15. Technical Development Path for Gas Foil Bearings

    Science.gov (United States)

    Dellacorte, Christopher

    2016-01-01

    Foil gas bearings are in widespread commercial use in air cycle machines, turbocompressors and microturbine generators and are emerging in more challenging applications such as turbochargers, auxiliary power units and propulsion gas turbines. Though not well known, foil bearing technology is well over fifty years old. Recent technological developments indicate that their full potential has yet to be realized. This paper investigates the key technological developments that have characterized foil bearing advances. It is expected that a better understanding of foil gas bearing development path will aid in future development and progress towards more advanced applications.

  16. Role of brown bears (Ursus arctos) in the flow of marine nitrogen into a terrestrial ecosystem.

    Science.gov (United States)

    Grant V. Hilderbrand; Thomas A. Hanley; Charles T. Robbins; Charles C. Schwartz

    1999-01-01

    We quantified the amount, spatial distribution, and importance of salmon (Oncorhynchus spp.)-derived nitrogen (N) by brown bears (Ursus arctos) on the Kenai Peninsula, Alaska. We tested and confirmed the hypothesis that the stable isotope signature (δ15N) of N in foliage of white spruce (

  17. Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage.

    Science.gov (United States)

    Hailer, Frank; Kutschera, Verena E; Hallström, Björn M; Klassert, Denise; Fain, Steven R; Leonard, Jennifer A; Arnason, Ulfur; Janke, Axel

    2012-04-20

    Recent studies have shown that the polar bear matriline (mitochondrial DNA) evolved from a brown bear lineage since the late Pleistocene, potentially indicating rapid speciation and adaption to arctic conditions. Here, we present a high-resolution data set from multiple independent loci across the nuclear genomes of a broad sample of polar, brown, and black bears. Bayesian coalescent analyses place polar bears outside the brown bear clade and date the divergence much earlier, in the middle Pleistocene, about 600 (338 to 934) thousand years ago. This provides more time for polar bear evolution and confirms previous suggestions that polar bears carry introgressed brown bear mitochondrial DNA due to past hybridization. Our results highlight that multilocus genomic analyses are crucial for an accurate understanding of evolutionary history.

  18. Experimental Evaluation of Journal Bearing Stability and New Gas Bearing Material

    Science.gov (United States)

    Keith, Theo G., Jr.; Dimofte, Florin

    2001-01-01

    It has been estimated that the noise levels in aircraft engine transmissions can be reduced by as much as 10 dB through the use of journal bearings. The potential benefits of lower noise levels include reduced wear, longer gear life and enhanced comfort for passengers and crew. Based on this concept the journal-thrust wave bearing was analyzed and its performance was evaluated. Numerical codes, developed over the past 30 years by Dr. Dimofte, were used to predict the performance of the bearing. The wave bearing is a fluid film bearing and therefore was analyzed using the Reynolds pressure equation. The formulation includes turbulent flow concepts and possesses a viscosity-temperature correction. The centrifugal growth of the bearing diameter and the deformation of the bearing under gear loads were also incorporated into the code. An experimental rig was developed to test the journal-thrust wave bearing.

  19. Gearbox Reliability Collaborative Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, J.

    2011-10-01

    NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

  20. Treatment of alpha bearing wastes

    International Nuclear Information System (INIS)

    1988-01-01

    This report deals with the current state of the art of alpha waste treatment, which is an integral part of the overall nuclear waste management system. The International Atomic Energy Agency (IAEA) defines alpha bearing waste as 'waste containing one or more alpha emitting radionuclides, usually actinides, in quantities above acceptable limits'. The limits are established by national regulatory bodies. The limits above which wastes are considered as alpha contaminated refer to the concentrations of alpha emitters that need special consideration for occupational exposures and/or potential safety, health, or environmental impact during one or more steps from generation through disposal. Owing to the widespread use of waste segregation by source - that is, based upon the 'suspect origin' of the material - significant volumes of waste are being handled as alpha contaminated which, in fact, do not require such consideration by reason of risk or environmental concern. The quantification of de minimis concepts by national regulatory bodies could largely contribute to the safe reduction of waste volumes and associated costs. Other factors which could significantly contribute to the reduction of alpha waste arisings are an increased application of assaying and sorting, instrumentation and the use of feedback mechanisms to control or modify the processes which generate these wastes. Alpha bearing wastes are generated during fabrication and reprocessing of nuclear fuels, decommissioning of alpha contaminated facilities, and other activities. Most alpha wastes are contact handled, but a small portion may require shielding or remote handling because of high levels of neutron (n), beta (β), or gamma (γ) emissions associated with the waste material. This report describes the sources and characteristics of alpha wastes and strategies for alpha waste management. General descriptions of treatment processes for solid and liquid alpha wastes are included. 71 refs, 14 figs, 9 tabs

  1. Spotted hyena and steppe lion predation behaviours on cave bears of Europe - ?Late Quaternary cave bear extinction as result of predator stress

    Science.gov (United States)

    Diedrich, Cajus G.

    2010-05-01

    high alpine regions the leopard Panthera pardus seem to have used the ecological niche of the absent hyenas (Diedrich 2009d, in review a). At open air sites cave bear scavenging by the largest Late Quaternary predators were proven, too (Diedrich 2006, 2009e). The predation stress caused by the three main and largest Late Quaternary predators seem to have provided cave bears to hibernate often deeply in many European caves, and here especially in larger and longer cave systems (e.g. Diedrich et al 2009, in review, Diedrich and Moldovan 2010) to protect themselves against the largest Quaternary predators. In conflicts with those large felids must have been killed by adult cave bears, which explains why those predator carcasses remained as complete skeletons or as partly disarticulated ones even deep in caves all over Europe which were finally not scavenged by the herbivorous cave bears (Diedrich in review). In such cave bear den caves the amount of lion bones generally take only 1-3% of the total bone amount being highly dominated by cave bear bones (Diedrich 2009c, in review). Lions and hyenas seem to have focussed onto the hunt of cave bears all over Europe, especially with the reduction of the biomass in the open environments at the maximum cold period during around 26.000-24.000 BP (Solutrean). The slow extinction of their largest prey was an important motor of the predation pressure onto cave bears. This might be one reason for the cave bear extinction in the final Late Quaternary (early Late Weichselian, maximum cold period) at least in northern Europe, but it seem to have happened in a combination of climatic change, and also human impact (cf. Diedrich, this volume). References Diedrich, C., 2005. Cracking and nibbling marks as indicators for the Upper Pleistocene spotted hyena as a scavenger of cave bear (Ursus spelaeus Rosenmüller, 1794) carcasses in the Perick Caves den of Northwest Germany. Abhandlungen der Naturhistorischen Gesellschaft Nürnberg, 45, 73

  2. Long-term bearing wear tests of conventional journal bearings and development of hydrostatic bearings for the LOFT drag-disc turbine transducer

    International Nuclear Information System (INIS)

    Fincke, J.R.

    1979-01-01

    The details of a two-year development program concerning materials for use as turbine bearings in a pressurized water reactor environment are reported. Two types of bearings have been examined, both conventional journal bearings and hydrostatic bearings. The results of long-term bearing wear tests conducted at 590 K and 15.1 MPa in water are presented. The feasibility of using hydrostatic bearings for the same transducer is demonstrated

  3. Rolling Bearing Life Prediction, Theory, and Application

    Science.gov (United States)

    Zaretsky, Erwin V.

    2016-01-01

    A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg-Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. (The use of ISO 281:2007 with a fatigue limit in these calculations would result in a bearing life approaching infinity.) Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application. Rules had been developed to distinguish and compare predicted lives with those actually obtained. Based upon field and test results of 51 ball and roller bearing sets, 98 percent of these bearing sets had acceptable

  4. Multiple Minority Stress and LGBT Community Resilience among Sexual Minority Men.

    Science.gov (United States)

    McConnell, Elizabeth A; Janulis, Patrick; Phillips, Gregory; Truong, Roky; Birkett, Michelle

    2018-03-01

    Minority stress theory has widespread research support in explaining health disparities experienced by sexual and gender minorities. However, less is known about how minority stress impacts multiply marginalized groups, such as lesbian, gay, bisexual, and transgender people of color (LGBT POC). Also, although research has documented resilience in the face of minority stress at the individual level, research is needed that examines macro-level processes such as community resilience (Meyer, 2015). In the current study, we integrate minority stress theory and intersectionality theory to examine multiple minority stress (i.e., racial/ethnic stigma in LGBT spaces and LGBT stigma in one's neighborhood) and community resilience (i.e., connection to LGBT community) among sexual minority men of different racial/ethnic groups who use a geosocial networking application for meeting sexual partners. Results showed that Black sexual minority men reported the highest levels of racial/ethnic stigma in LGBT spaces and White sexual minority men reported the lowest levels, with Asian and Hispanic/Latino men falling in between. Consistent with minority stress theory, racial/ethnic stigma in LGBT spaces and LGBT stigma in one's neighborhood were associated with greater stress for sexual minority men of all racial/ethnic groups. However, connection to LGBT community played more central role in mediating the relationship between stigma and stress for White than POC sexual minority men. Results suggest that minority stress and community resilience processes may differ for White and POC sexual minority men. Potential processes driving these differences and implications for minority stress theory are discussed.

  5. A Success Story: Recruiting & Retaining Underrepresented Minority Doctoral Students in Biomedical Engineering

    Science.gov (United States)

    Reichert, William M.

    2006-01-01

    There are various ways to succeed in recruiting and retaining underrepresented minority (URM) doctoral students; but key to them all is the creation of real student-faculty relationships, which demonstrate by example that diversity and excellence can and should coexist. This cannot be delegated or done indirectly, and no amount of outreach, campus…

  6. Evaluating population expansion of black bears using spatial capture-recapture

    Science.gov (United States)

    Sun, Catherine C.; Fuller, Angela K.; Hare, Matthew P.; Hurst, Jeremy E.

    2017-01-01

    The population of American black bears (Ursus americanus) in southern New York, USA has been growing and expanding in range since the 1990s. This has motivated a need to anticipate future patterns of range expansion. We conducted a non-invasive, genetic, spatial capture-recapture (SCR) study to estimate black bear density and identify spatial patterns of population density that are potentially associated with range expansion. We collected hair samples in a 2,519-km2 study area in southern New York with barbed-wire hair snares and identified individuals and measured genetic diversity using 7 microsatellite loci and 1 sex-linked marker. We estimated a mean density of black bears in the region of 13.7 bears/100 km2, and detected a slight latitudinal gradient in density consistent with the documented range expansion. However, elevation and the amounts of forest, crop, and developed landcover types did not influence density, suggesting that bears are using a diversity of resources in this heterogeneous landscape outside their previously described distribution. These results provide the first robust baseline estimates for population density and distribution associated with different landcover types in the expanded bear range. Further, genetic diversity was comparable to that of non-expanding black bear populations in the eastern United States, and in combination with the latitudinal density gradient, suggest that the study area is not at the colonizing front of the range expansion. In addition, the diversity of landcover types used by bears in the study area implies a possible lack of constraints for further northern expansion of the black bear range. Our non-invasive, genetic, spatial capture-recapture approach has utility for studying populations of other species that may be expanding in range because SCR allows for the testing of explicit, spatial ecological hypotheses. 

  7. When top predators become prey: Black bears alter movement behaviour in response to hunting pressure.

    Science.gov (United States)

    Stillfried, Milena; Belant, Jerrold L; Svoboda, Nathan J; Beyer, Dean E; Kramer-Schadt, Stephanie

    2015-11-01

    The trade-off between predator avoidance and foraging is a key decision making factor that shapes an organism's adaptive behaviour and movement patterns. Human hunters act as top predators to influence the behaviour of free-ranging mammals, including large carnivorous species such as black bears (Ursus americanus). Analysing the effects of hunting on animal behavioural patterns is essential for understanding the extent to which animals detect and respond to human-induced disturbances. To this end, we assessed whether black bear movement behaviour changed with varying risk from spatially and temporally heterogeneous human predation. Levels of risk were categorized as either low (disturbance from dog training; n=19 bears) or high (disturbance from hunting activities; n=11 bears). Road types were either paved (risk due to vehicles) or non-paved (risk due to hunters) and were used as proxies for hunting effort and amount of disturbance. We began by testing the null hypothesis that bears' distribution before the onset of human disturbance is spatially random. Next, to test temporal movement adjustment between the low and high risk levels, we measured the distance to the nearest road and the road crossing frequency using mixed effects models with risk level, time of day and sex as predictor variables. As disturbance near non-paved roads increased due to the start of the hunting activity, the mean distances of bears to non-paved roads increased while the mean distances of bears to paved roads decreased, despite the continual risk of vehicle collision. These behavioural responses were observed during day and night, with the frequency of crossing paved roads at night five times greater than in daytime during the hunting season. Our findings demonstrate that black bears are able to detect risky places and adjust their spatial movements accordingly. More specifically, bears can perceive changes in the level of risk from human hunting activities on a fine temporal scale

  8. Changes during hibernation in different phospholipid and free and esterified cholesterol serum levels in black bears.

    Science.gov (United States)

    Chauhan, Ved; Sheikh, Ashfaq; Chauhan, Abha; Tsiouris, John; Malik, Mazhar; Vaughan, Michael

    2002-10-01

    During hibernation, fat is known to be the preferred source of energy. A detailed analysis of different phospholipids, as well as free and esterified cholesterol, was conducted to investigate lipid abnormalities during hibernation. The levels of total phospholipids and total cholesterol in the serum of black bears were found to increase significantly in hibernation as compared with the active state. Both free and esterified cholesterol were increased in the hibernating state in comparison with the active state (P hibernation was more in free cholesterol (57%) than in esterified cholesterol (27%). Analysis of subclasses of serum phospholipids showed that choline containing phospholipids, i.e., sphingomyelin (SPG) (14%) and phosphatidylcholine (PC) (76%), are the major phospholipids in the serum of bear. The minor phospholipids included 8% of phosphatidylserine (PS) + phosphatidylinositol (PI), while phosphatidylethanolamine (PE) was only 2% of the total phospholipids. A comparison of phospholipid subclasses showed that PC, PS + PI and SPG were significantly increased, while PE was significantly decreased (P hibernating state as compared with the active state in black bears. These results suggest that the catabolism of phospholipids and cholesterol is decreased during hibernation in black bears, leading to their increased levels in the hibernating state as compared with the active state. In summary, our results indicate that serum cholesterol and phospholipid fractions (except PE) are increased during hibernation in bears. It is proposed that the increase of these lipids may be due to the altered metabolism of lipoproteins that are responsible for the clearance of the lipids.

  9. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  10. Homogeneous Minor Actinide Transmutation in SFR: Neutronic Uncertainties Propagation with Depletion

    International Nuclear Information System (INIS)

    Buiron, L.; Plisson-Rieunier, D.

    2015-01-01

    In the frame of next generation fast reactor design, the minimisation of nuclear waste production is one of the key objectives for current R and D. Among the possibilities studied at CEA, minor actinides multi-recycling is the most promising industrial way achievable in the near-term. Two main management options are considered: - Multi-recycling in a homogeneous way (minor actinides diluted in the driver fuel). If this solution can help achieving high transmutation rates, the negative impact of minor actinides on safety coefficients allows only a small fraction of the total heavy mass to be loaded in the core (∼ few %). - Multi-recycling in heterogeneous way by means of Minor Actinide Bearing Blanket (MABB) located at the core periphery. This solution offers more flexibility than the previous one, allowing a total minor actinides decoupled management from the core fuel. As the impact on feedback coefficient is small larger initial minor actinide mass can be loaded in this configuration. Starting from a breakeven Sodium Fast Reactor designed jointly by CEA, Areva and EdF teams, the so called SFR V2B, transmutation performances have been studied in frame on the French fleet for both options and various specific isotopic management (all minor actinides, americium only, etc.). Using these results, a sensitivity study has been performed to assess neutronic uncertainties (i.e coming from cross section) on mass balance on the most attractive configurations. This work in based on a new implementation of sensitivity on concentration with depletion in the ERANOS code package. Uncertainties on isotopes masses at the end of irradiation using various variance-covariance is discussed. (authors)

  11. Medicare's Hospital Readmissions Reduction Program in Surgery May Disproportionately Affect Minority-serving Hospitals.

    Science.gov (United States)

    Shih, Terry; Ryan, Andrew M; Gonzalez, Andrew A; Dimick, Justin B

    2015-06-01

    To project readmission penalties for hospitals performing cardiac surgery and examine how these penalties will affect minority-serving hospitals. The Hospital Readmissions Reduction Program will potentially expand penalties for higher-than-predicted readmission rates to cardiac procedures in the near future. The impact of these penalties on minority-serving hospitals is unknown. We examined national Medicare beneficiaries undergoing coronary artery bypass grafting in 2008 to 2010 (N = 255,250 patients, 1186 hospitals). Using hierarchical logistic regression, we calculated hospital observed-to-expected readmission ratios. Hospital penalties were projected according to the Hospital Readmissions Reduction Program formula using only coronary artery bypass grafting readmissions with a 3% maximum penalty of total Medicare revenue. Hospitals were classified into quintiles according to proportion of black patients treated. Minority-serving hospitals were defined as hospitals in the top quintile whereas non-minority-serving hospitals were those in the bottom quintile. Projected readmission penalties were compared across quintiles. Forty-seven percent of hospitals (559 of 1186) were projected to be assessed a penalty. Twenty-eight percent of hospitals (330 of 1186) would be penalized less than 1% of total Medicare revenue whereas 5% of hospitals (55 of 1186) would receive the maximum 3% penalty. Minority-serving hospitals were almost twice as likely to be penalized than non-minority-serving hospitals (61% vs 32%) and were projected almost triple the reductions in reimbursement ($112 million vs $41 million). Minority-serving hospitals would disproportionately bear the burden of readmission penalties if expanded to include cardiac surgery. Given these hospitals' narrow profit margins, readmission penalties may have a profound impact on these hospitals' ability to care for disadvantaged patients.

  12. CRIMINALITY AT MINORS WITH MENTAL DEFICIENCY

    Directory of Open Access Journals (Sweden)

    Zoran Kitkanj

    2009-06-01

    Full Text Available The aim of this paper is to present, from penological aspect, the involvement and structure of recidivism at minors with mental deficiency within the whole area of juvenile criminality in Macedonia. The research covers 62 subjects who pay the penalty in juvenile penitentiary or institutional measure directing to correctional institution for minors. Of the total number of minors who hold one of the above-mentioned sanctions, minors with lower average IQ are presented with 56.4%. The shown involvement is in penological terms (refers to minors who hold institutional measure correctional institution for minors or penalty - juvenile penitentiary which does not mean that this category of juvenile delinquents participate in such percent in the total number of reported, accused and convicted minors. According to the research results it can be concluded that falling behind in intellectual development is an indicator for delinquent behavior but in no case it can be crucial or the most important factor for criminality. Of the total number of juvenile delinquents with intellectual deficit, 80% are repeat offenders in criminal legal sense. It is of great concern that 56% of the under average juvenile delinquents defied the law for the first time before the age of 14 years that is as children.

  13. Minor actinide transmutation - a waste management option

    International Nuclear Information System (INIS)

    Koch, L.

    1986-01-01

    The incentive to recycle minor actinides results from the reduction of the long-term α-radiological risk rather than from a better utilization of the uranium resources. Nevertheless, the gain in generated electricity by minor actinide transmutation in a fast breeder reactor can compensate for the costs of their recovery and make-up into fuel elements. Different recycling options of minor actinides are discussed: transmutation in liquid metal fast breeder reactors (LMFBRs) is possible as long as plutonium is not recycled in light water reactors (LWRs). In this case a minor actinide burner with fuel of different composition has to be introduced. The development of appropriate minor actinide fuels and their properties are described. The irradiation experiments underway or planned are summarized. A review of minor actinide partitioning from the PUREX waste stream is given. From the present constraints of LMFBR technology a reduction of the long-term α-radiological risk by a factor of 200 is deduced relative to that from the direct storage of spent LWR fuel. Though the present accumulation of minor actinides is low, nuclear transmutation may be needed when nuclear energy production has grown. (orig.)

  14. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    2005-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coe±cients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 [1]and described further in 1972 [2]. Several authors have re¯ned this metho...

  15. INVESTIGATION OF SHALLOW FOUNDATION SOIL BEARING ...

    African Journals Online (AJOL)

    This study investigated the soil bearing capacity and foundation settlement characteristics of Minna City Centre development site using standard penetration test (SPT) data obtained from10 SPT boreholes at 0.6, 2.1 and 3.6 m depths to correlate soil properties. Evaluation of foundation bearing capacity and settlement ...

  16. INVESTIGATION OF ANGULAR BALL BEARING WEAR

    Directory of Open Access Journals (Sweden)

    A. L. Savchenko

    2006-01-01

    Full Text Available Wearing process of balls in an angular ball bearing has been investigated in the paper. Force affecting a separator from the side of balls is determined theoretically. Wear rate may be calculated with a formula for abrasive wear while substituting numerical parameter values of the investigated ball bearing for formula symbols.

  17. On the dynamics of ball bearings

    NARCIS (Netherlands)

    Wensing, J.A.

    1998-01-01

    This investigation on the dynamic behaviour of ball bearings was motivated by the demand for silent bearings in noise-sensitive applications, especially in the household appliance and automotive industry. The present investigations are intended to provide a clear understanding of the role of the

  18. Hydrodynamic Lubrication Analysis Of Slider Bearings Lubricated ...

    African Journals Online (AJOL)

    Hydrodynamic Lubrication Analysis Of Slider Bearings Lubricated With Micropolar Fluids. ... In this paper, a theoretical study of the effect of micropolar lubricants on the performance characteristics of wide inclined slider bearings is presented. The finite element method and Gauss Seidel iterative procedure have been used ...

  19. 33 CFR 117.543 - Bear Creek.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Bear Creek. 117.543 Section 117.543 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Maryland § 117.543 Bear Creek. (a) The draws of the Baltimore...

  20. Friction coefficients of PTFE bearing liner

    Science.gov (United States)

    Daniels, C. M.

    1979-01-01

    Data discusses frictional characteristics of PTFE (polytetrafluoroethylene) under temperature extremes and in vacuum environment. Tests were also run on reduced scale hardware to determine effects of vacuum. Data is used as reference by designers of aircraft-control system rod-end bearings and for bearings used in polar regions.

  1. BEARING ANALYSIS FOR THE SPUR TURBOGENERATOR.

    Science.gov (United States)

    The results of the analysis of journal bearing configuration for the SPUR turbogenerator are presented in this report. For this analysis, a computer...laminar analysis agreed with existing solutions, thereby providing a check of the computer program. Several journal bearing mounting arrangements were considered, and a design was selected for initial testing. (Author)

  2. Protecting a Ball-Bearing-Deflection Monitor

    Science.gov (United States)

    Kuhr, George A.

    1987-01-01

    Deflectometer probe monitors deflection of ball-bearing race in liquid oxygen with aid of small window or diaphragm. Diaphragm or window isolates optical deflectometer from liquid oxygen or other fluid in ball bearing. At high pressures, diaphragm integral part of housing preferable to window, since there would be no leakage.

  3. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    orifices machined in the bearing pads, one can alter the machine dynamic characteristics, thus enhancing its operational range. A mathematical model of the rotor-bearing system, as well as of the hydraulic system, is presented. Numerical results of the system frequency response show good agreement...

  4. Can polar bear hairs absorb environmental energy?

    OpenAIRE

    He Ji-Huan; Wang Qing-Li; Sun Jie

    2011-01-01

    A polar bear (Ursus maritimus) has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  5. Can polar bear hairs absorb environmental energy?

    Directory of Open Access Journals (Sweden)

    He Ji-Huan

    2011-01-01

    Full Text Available A polar bear (Ursus maritimus has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  6. TEMPERATURE DIAGNOSTICS OF GAS TURBINE ENGINE BEARINGS

    Directory of Open Access Journals (Sweden)

    R. V. Birukov

    2014-01-01

    Full Text Available The objective of the current research was to develop methodology for diagnosing industrial gas turbine engine bearings using the standard performance parameters. This paper presents mathematical thermal model of combined thrust and radial bearing and provides the model application examples for diagnostics.

  7. Effect of ankle-foot orthosis on weight bearing of chronic stroke patients performing various functional standing tasks.

    Science.gov (United States)

    Don Kim, Kyoung; Lee, Hyun Jin; Lee, Myoung Hyo; Hwangbo, Gak

    2015-04-01

    [Purpose] This study examined how an ankle-foot orthosis (AFO) influences the weight-bearing of chronic stroke patients during the performance of five functional standing tasks. [Subjects and Methods] Sixteen patients with stroke participated in this experiment. The subjects performed functional standing tasks with or without the AFO and weight bearing was measured during the tasks. [Results] Patients showed increased weight-bearing ability on the affected side during wearing the AFO in all tasks, and there were significant differences among Tasks 1, 2, and 3. Patients showed a small amount of increased weight bearing on the unaffected side while wearing the AFO in all tasks except for Task 2. [Conclusion] ADL-related functional standing tasks with AFO increased the weight bearing.

  8. Gas Lubricated Foil Bearing Development for Advanced Turbomachines

    Science.gov (United States)

    1977-03-01

    Rear Journal Bearing Runner 29 3.1.6 Forward Journal Bearing Runner Stress and DefJection Analysis 32 3.1.7 Critical Speed Analysis 35 3.1.8 Thermal...Analysis 39 3.1.8.1 Journal Bearing Temperatures 42 3.1.8.2 Thrust Bearing Temperatures 50 3.2 Design 56 3.2.1 Baseline Bearing Design 56 3.2.1.1 Journal ... Bearing Baseline Design 57 3.2.1.2 Thrust Bearing Baseline Design 59 3.2.2 Thrust Bearing Test Rig Design 61 3.2.3 Journal Bearing Test Rig Design 63

  9. Transient response of two lobe aerodynamic journal bearing

    Directory of Open Access Journals (Sweden)

    Saurabh Kumar Yadav

    2018-03-01

    Full Text Available The dynamic behavior of a rotor-dynamic system is greatly affected by the performance of aerodynamic bearing and the performance of bearing is characterized by the stiffness and damping coefficients. In the present work, stiffness and damping coefficients of bearing are computed and the performance of the bearing is greatly changed with the change in bearing air film profile. The effect of lobe offset factors on the transient performance of aerodynamic bearing is presented. Bifurcation and Poincare diagrams of two lobe journal bearing have been presented for different offset factors. A bearing designer can judge the bearing performance based on bifurcation diagrams.

  10. Addressing Health Care Disparities Among Sexual Minorities.

    Science.gov (United States)

    Baptiste-Roberts, Kesha; Oranuba, Ebele; Werts, Niya; Edwards, Lorece V

    2017-03-01

    There is evidence of health disparities between sexual minority and heterosexual populations. Although the focus of lesbian, gay, bisexual, and transgender health research has been human immunodeficiency virus/acquired immunodeficiency syndrome and sexually transmitted infection among men who have sex with men, there are health disparities among sexual minority women. Using the minority stress framework, these disparities may in part be caused by individual prejudice, social stigma, and discrimination. To ensure equitable health for all, there is urgent need for targeted culturally sensitive health promotion, cultural sensitivity training for health care providers, and intervention-focused research. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Visual and Computational Modelling of Minority Games

    Directory of Open Access Journals (Sweden)

    Robertas Damaševičius

    2017-02-01

    Full Text Available The paper analyses the Minority Game and focuses on analysis and computational modelling of several variants (variable payoff, coalition-based and ternary voting of Minority Game using UAREI (User-Action-Rule-Entities-Interface model. UAREI is a model for formal specification of software gamification, and the UAREI visual modelling language is a language used for graphical representation of game mechanics. The URAEI model also provides the embedded executable modelling framework to evaluate how the rules of the game will work for the players in practice. We demonstrate flexibility of UAREI model for modelling different variants of Minority Game rules for game design.

  12. The dynamic state monitoring of bearings system

    Directory of Open Access Journals (Sweden)

    Marek Krynke

    2015-03-01

    Full Text Available The article discusses the methods of dynamic state monitoring of bearings system. A vibration signal contains important technical information about the machine condition and is currently the most frequently used in diagnostic bearings systems. One of the main ad-vantages of machine condition monitoring is identifying the cause of failure of the bearings and taking preventative measures, otherwise the operation of such a machine will lead to frequent replacement of the bearings. Monitoring changes in the course of the operation of machin-ery repair strategies allows keeping the conditioned state of dynamic failure conditioned preventive repairs and repairs after-failure time. In addition, the paper also presents the fundamental causes of bearing failure and identifies mechanisms related to the creation of any type of damage.

  13. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing...... the rotational speed ranges by improving damping and eliminating instability problems, for example, by compensating cross-coupling destabilizing effects; reducing startup torque and energy dissipation in bearings; compensating thermal effects. It is shown that such controllable bearings can act as "smart......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

  14. Development of gadolinia bearing fuel for PWR

    International Nuclear Information System (INIS)

    Seki, Kazuichiro

    1986-01-01

    In the PWR power plants in Japan, the long-period operation cycle was extended legally to a maximum of 13 months from the conventional about 9 months in fiscal 1980. With this move, as a new type of fuel with burnable-poison-rod function, the development was started of gadolinia-bearing (gadolinium oxide) fuel, gadolinia being contained in the fuel pellets. The basic technology studies were completed in fiscal 1984. Actual irradiation of the fuel in Unit 2 of the Oi Power Station was then started in July 1984, demonstrating validity of the design. Meanwhile, the rapid power-up fest and the fuel center temperature measurement are conducted in an overseas reactor from fiscal 1983. The following are described: functions of the burnable absorber, the need for gadolinia-bearing fuel, experiences with gadolinia-bearing fuel, problems in the design and production of gadolinia-bearing fuel, the development of gadolinia-bearing fuel. (Mori, K.)

  15. Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

    Science.gov (United States)

    Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

    2009-01-01

    Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

  16. Wave journal bearing with compressible lubricant--Part 1: The wave bearing concept and a comparison to the plain circular bearing

    Science.gov (United States)

    Dimofte, Florin

    1995-01-01

    To improve hydrodynamic journal bearing steady-state and dynamic performance, a new bearing concept, the wave journal bearing, was developed at the author's lab. This concept features a waved inner bearing diameter. Compared to other alternative bearing geometries used to improve bearing performance such as spiral or herring-bone grooves, steps, etc., the wave bearing's design is relatively simple and allows the shaft to rotate in either direction. A three-wave bearing operating with a compressible lubricant, i.e., gas is analyzed using a numerical code. Its performance is compared to a plain (truly) circular bearing over a broad range of bearing working parameters, e.g., bearing numbers from 0.01 to 100.

  17. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  18. 24 CFR 3285.202 - Soil classifications and bearing capacity.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Soil classifications and bearing... Soil classifications and bearing capacity. The soil classification and bearing capacity of the soil... bearing capacity must be determined by one or more of the following methods, unless the soil bearing...

  19. Hydrodynamic air lubricated compliant surface bearing for an automotive gas turbine engine. 1: Journal bearing performance

    Science.gov (United States)

    Ruscitto, D.; Mccormick, J.; Gray, S.

    1978-01-01

    A 38.1 mm (1.5 inch) diameter Hydresil Compliant Surface Air Lubricated Journal Bearing was designed and tested to obtain bearing performance characteristics at both room temperature and 315 C (600 F). Testing was performed at various speeds up to 60,000 rpm with varying loads. Rotating sensors provided an opportunity to examine the film characteristics of the compliant surface bearing. In addition to providing minimum film thickness values and profiles, many other insights into bearing operation were gained such as the influence of bearing fabrication accuracy and the influence of smooth foil deflection between the bumps.

  20. Failure of GIMBAL bearing in directional GYRO

    International Nuclear Information System (INIS)

    Pervaiz, R.; Baig, N.A.; Shahid, M.; Ahmad, A.; Chohan, G.Y.

    2003-01-01

    This paper relates to the directional gyro of a sensing device used in indigenously developed surface-to-surface missile. The assembling of more than one thousand components in the form of several sub assemblies including hundreds of silver solders of this device was done in the hundred-thousands-class clean room according to assembly procedure. Whereas more than twenty bearings including gimbals bearings were assembled in the ten-thousands-class clean room after inspection/ testing them on beating testing system as per routine. The device was entered in testing and adjustment phase after successful completion of assembly work. The directional gyro qualified all the tests except the most critical one, the drift-rate. The drift-rate of outer gimbal was 60% more than permissible limit whereas drift-rate of inner gimbal was found O.K. It was diagnosed that at least one inner gimbal bearing out of two had some problem. The results were same after rebalancing of gimbals three times. The directional gyro was disassembled in clean room and the radial-thrust-bearing was recovered and flange bearing which are inner gimbal bearings. They were checked on bearing testing system and it was found that flange-bearing had more friction than permissible limit and hence rejected but radial thrust bearing were declared O.K. The gyro was reassembled with new O.K. flange bearing and the assembly work was completed in all respects. The sensing device qualified all the tests including the drift-rate. This case study is being presented to emphasize the importance of careful assembly of gyro in clean environment. (author)

  1. 20 CFR 234.46 - Amount of the RLS payable.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Amount of the RLS payable. 234.46 Section 234...-SUM PAYMENTS Residual Lump-Sum Payment § 234.46 Amount of the RLS payable. The gross RLS amount is... this chapter, respectively.) The amount of the RLS payable is equal to the gross RLS minus the sum of...

  2. Genomic evidence of widespread admixture from polar bears into brown bears during the last ice age.

    Science.gov (United States)

    Cahill, James A; Heintzman, Peter D; Harris, Kelley; Teasdale, Matthew D; Kapp, Joshua; Soares, André E Rodrigues; Stirling, Ian; Bradley, Daniel; Edwards, Ceiridwen J; Graim, Kiley; Kisleika, Aliaksandr A; Malev, Alexander V; Monaghan, Nigel; Green, Richard E; Shapiro, Beth

    2018-02-20

    Recent genomic analyses have provided substantial evidence for past periods of gene flow from polar bears (Ursus maritimus) into Alaskan brown bears (Ursus arctos), with some analyses suggesting a link between climate change and genomic introgression. However, because it has mainly been possible to sample bears from the present day, the timing, frequency, and evolutionary significance of this admixture remains unknown. Here, we analyze genomic DNA from three additional and geographically distinct brown bear populations, including two that lived temporally close to the peak of the last ice age. We find evidence of admixture in all three populations, suggesting that admixture between these species has been common in their recent evolutionary history. In addition, analyses of ten fossil bears from the now-extinct Irish population indicate that admixture peaked during the last ice age, when brown bear and polar bear ranges overlapped. Following this peak, the proportion of polar bear ancestry in Irish brown bears declined rapidly until their extinction. Our results support a model in which ice age climate change created geographically widespread conditions conducive to admixture between polar bears and brown bears, as is again occurring today. We postulate that this model will be informative for many admixing species pairs impacted by climate change. Our results highlight the power of paleogenomics to reveal patterns of evolutionary change that are otherwise masked in contemporary data.

  3. Bear-ly” learning: Limits of abstraction in black bear cognition

    Directory of Open Access Journals (Sweden)

    Jennifer Vonk

    2018-02-01

    Full Text Available We presented two American black bears (Ursus americanus with a serial list learning memory task, and one of the bears with a matching-to-sample task. After extended training, both bears demonstrated some success with the memory task but failed to generalize the overarching rule of the task to novel stimuli. Matching to sample proved even more difficult for our bear to learn. We conclude that, despite previous success in training bears to respond to natural categories, quantity discriminations, and other related tasks, that bears may possess a cognitive limitation with regards to learning abstract rules. Future tests using different procedures are necessary to determine whether this is a limit of bears’ cognitive capacities, or a limitation of the current tasks as presented. Future tests should present a larger number of varying stimuli. Ideally, bears of various species should be tested on these tasks to demonstrate species as well as individual differences.

  4. Vibration quenching in a large scale rotor-bearing system using journal bearings with variable geometry

    Science.gov (United States)

    Chasalevris, Athanasios; Dohnal, Fadi

    2014-03-01

    In large scale rotating machinery the resonance amplitude during the passage through resonance is a matter of consideration because of its influence in the surrounding environment of the rotational system and foundation. In this paper, a variable geometry journal bearing (VGJB), recently patented, is applied for the mounting of a large scale rotor bearing system operating at the range of medium speed. The simulation of the rotor-bearing system incorporates a recent method for simulation of a multi-segment continuous rotor in combination with nonlinear bearing forces. The use of the current bearing gives results that encourage the use of such a bearing in rotating machinery since the vibration amplitude during the passage through the critical speed can be reduced up to 60-70%. In the presented study, the developed amplitude and the rotor stresses are severely reduced compared to those of the system with normal cylindrical journal bearings during a virtual start up of the system.

  5. Considerations for successful minority investments in independent power projects

    International Nuclear Information System (INIS)

    Bleveans, Lincoln

    1998-01-01

    This article considers the role of lead developers and lead investors, and minority investors in power projects. The risks involved in minority investment without control is examined, and minority investor issues, the 'due diligence' of the minority investor, the need for timely information, and the importance of minority investors to the power project are discussed. (UK)

  6. Early adolescent music preferences and minor delinquency.

    Science.gov (United States)

    Ter Bogt, Tom F M; Keijsers, Loes; Meeus, Wim H J

    2013-02-01

    To test Music Marker Theory (MMT) positing that early adolescents' preferences for nonmainstream types of popular music indicate concurrent and later minor delinquency. MMT was tested in a 4-year longitudinal study (n = 309). The results showed that early fans of different types of rock (eg, rock, heavy metal, gothic, punk), African American music (rhythm and blues, hip-hop), and electronic dance music (trance, techno/hardhouse) showed elevated minor delinquency concurrently and longitudinally. Preferring conventional pop (chart pop) or highbrow music (classic music, jazz), in contrast, was not related to or was negatively related to minor delinquency. Early music preferences emerged as more powerful indicators of later delinquency rather than early delinquency, indicating that music choice is a strong marker of later problem behavior. The mechanisms through which music preferences are linked to minor delinquency are discussed within the framework of MMT.

  7. BINARY MINOR PLANETS V1.0

    Data.gov (United States)

    National Aeronautics and Space Administration — We present a data table giving basic physical and orbital parameters for known binary minor planets in the Solar System (and Pluto/Charon) based on published...

  8. BINARY MINOR PLANETS V6.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, as inspired by Richardson...

  9. BINARY MINOR PLANETS V4.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, as inspired by Richardson...

  10. BINARY MINOR PLANETS V5.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, as inspired by Richardson...

  11. BINARY MINOR PLANETS V8.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, compiled from the...

  12. BINARY MINOR PLANETS V9.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, compiled from the...

  13. BINARY MINOR PLANETS V7.0

    Data.gov (United States)

    National Aeronautics and Space Administration — The data set lists orbital and physical properties for well-observed or suspected binary/multiple minor planets including the Pluto system, compiled from the...

  14. BINARY MINOR PLANETS V2.0

    Data.gov (United States)

    National Aeronautics and Space Administration — We present data tables giving basic orbital and physical parameters for well-observed or suspected binary/multiple minor planets and the Pluto system, based on a...

  15. BINARY MINOR PLANETS V3.0

    Data.gov (United States)

    National Aeronautics and Space Administration — We present data tables giving basic orbital and physical parameters for well-observed or suspected binary/multiple minor planets and the Pluto system, based on a...

  16. National Minority Organisations in Prague: structure, competence

    Czech Academy of Sciences Publication Activity Database

    Sulitka, Andrej; Uherek, Zdeněk

    2015-01-01

    Roč. 25, č. 5 (2015), s. 3-17 ISSN 0862-8351 Institutional support: RVO:68378076 Keywords : ethnology * social anthropology * Czech Republic * minority * national policy Subject RIV: AC - Archeology, Anthropology, Ethnology

  17. Clinical Implications of HIV-1 Minority Variants

    OpenAIRE

    Li, Jonathan Z.; Kuritzkes, Daniel R.

    2013-01-01

    Low-frequency HIV variants are increasingly recognized as a key factor that increases the risk of HIV treatment failure. This article will provide a review of HIV minority variants, including their demonstrated clinical impact and areas of controversy.

  18. The minor collagens in articular cartilage

    DEFF Research Database (Denmark)

    Luo, Yunyun; Sinkeviciute, Dovile; He, Yi

    2017-01-01

    , especially minor collagens, including type IV, VI, IX, X, XI, XII, XIII, and XIV, etc. Although accounting for only a small fraction of the mature matrix, these minor collagens not only play essential structural roles in the mechanical properties, organization, and shape of articular cartilage, but also...... these minor collagens. The generation and release of fragmented molecules could generate novel biochemical markers with the capacity to monitor disease progression, facilitate drug development and add to the existing toolbox for in vitro studies, preclinical research and clinical trials....... fulfil specific biological functions. Genetic studies of these minor collagens have revealed that they are associated with multiple connective tissue diseases, especially degenerative joint disease. The progressive destruction of cartilage involves the degradation of matrix constituents including...

  19. BWR Assembly Optimization for Minor Actinide Recycling

    Energy Technology Data Exchange (ETDEWEB)

    G. Ivan Maldonado; John M. Christenson; J.P. Renier; T.F. Marcille; J. Casal

    2010-03-22

    The Primary objective of the proposed project is to apply and extend the latest advancements in LWR fuel management optimization to the design of advanced boiling water reactor (BWR) fuel assemblies specifically for the recycling of minor actinides (MAs).

  20. Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis

    Science.gov (United States)

    Cong, Feiyun; Chen, Jin; Dong, Guangming; Pecht, Michael

    2013-04-01

    Rolling element bearing faults are among the main causes of breakdown in rotating machines. In this paper, a rolling bearing fault model is proposed based on the dynamic load analysis of a rotor-bearing system. The rotor impact factor is taken into consideration in the rolling bearing fault signal model. The defect load on the surface of the bearing is divided into two parts, the alternate load and the determinate load. The vibration response of the proposed fault signal model is investigated and the fault signal calculating equation is derived through dynamic and kinematic analysis. Outer race and inner race fault simulations are realized in the paper. The simulation process includes consideration of several parameters, such as the gravity of the rotor-bearing system, the imbalance of the rotor, and the location of the defect on the surface. The simulation results show that different amplitude contributions of the alternate load and determinate load will cause different envelope spectrum expressions. The rotating frequency sidebands will occur in the envelope spectrum in addition to the fault characteristic frequency. This appearance of sidebands will increase the difficulty of fault recognition in intelligent fault diagnosis. The experiments given in the paper have successfully verified the proposed signal model simulation results. The test rig design of the rotor bearing system simulated several operating conditions: (1) rotor bearing only; (2) rotor bearing with loader added; (3) rotor bearing with loader and rotor disk; and (4) bearing fault simulation without rotor influence. The results of the experiments have verified that the proposed rolling bearing signal model is important to the rolling bearing fault diagnosis of rotor-bearing systems.

  1. The Research Status and Progress of Heavy/Large Hydrostatic Thrust Bearing

    Directory of Open Access Journals (Sweden)

    Xibing Li

    2014-03-01

    Full Text Available How to improve the rotation speed of heavy/large CNC vertical lathe, the machining efficiency, and machining precision is one of the key issues which need to be solved urgently. Hydrostatic thrust bearing is the key part to the heavy/large CNC vertical lathe; its performance directly affects the machining quality and operation efficiency. This paper analyses the latest research results from the perspective of the mechanical properties of hydrostatic thrust bearing, oil film lubrication, static pressure bearing thermal deformation, and the high efficiency refrigeration and evaluates the future scientific research direction in this area. Analysis shows that with the development of hydrostatic thrust bearing to the high speed, high precision, high efficiency, high stability, high multifunction, and high power, the study of hydrostatic thrust bearing will focus on the optimal design of the oil chamber to produce the least amount of heat, how to control the thermal deformation of hydrostatic thrust bearing, and the high efficiency refrigeration to ensure the machining accuracy of CNC equipment.

  2. Preparation of liposome bearing disulfide proteinoid and its reduction-responsive release property.

    Science.gov (United States)

    Kwon, Kyeongnan; Kim, Jin-Chul

    2017-09-01

    Egg phosphatidylcholine (Egg PC) liposome bearing a disulfide proteinoid exhibited a reduction-responsive release property. Proteinoid composed of Asp, Leu, and cystamine (Prot(ALC)) and Asp and Leu (Prot(AL)) were synthesized by thermal condensation, confirmed by Raman, FT-IR, 1 H NMR and 13 C NMR spectroscopy. Egg PC liposome bearing the proteinoid was prepared by a film hydration and sonication method. The fluorescence quenching of dye (i.e. calcein) loaded in liposome bearing the proteinoid was 68.1-78.1%. The mean hydrodynamic diameter of liposome bearing the proteinoid was less than 200 nm and it decreased with increasing amount of the proteinoid. On the TEM photo, multi-lamellar vesicles were observed and the vesicle diameter was 100-300 nm. At all the phospholipid to proteinod ratios tested (i.e. 1:0.01, 1:0.02, and 1:0.05 (w/w)), the release degree in 12 h of dye loaded in liposome bearing Prot(AL) was less than 2%, and it was almost the same regardless of dithiothreitol (DTT, a reducing agent) concentration (i.e. 0, 10, and 20 mM). Whereas the release degree of dye loaded in liposome bearing Prot(ALC) was 1.5-8.4% and it was significantly dependent on DTT concentration.

  3. The Minor Rivers of Black Sea North-Western Coast

    Science.gov (United States)

    Alyukaeva, Alevtina

    2017-04-01

    The generalisations and conclusions have been done based on the expeditional monitoring of minor rivers of the Russian Federation Black Sea Coast for summer-autumn mean water in 2011-2015. The length of coastal line under monitoring was 300 km with 78 rivers with length no longer, then 50 km. The monitoring task was to establish the natural background of river effluent for the region under study. The observation parameters are physical measures (temperature, pH, Eh), solution (salts) and suspension forms of effluent (feculence, suspension chemical composition). 1. The tendency to decrease minor river water temperature at isthmus correspondent to movement from north-west to south-east along the coastal line. The causes are the growing length of the rivers and steepness of the relief along the Black Sea Caucasus. 2. The dependence between the size of coagulated suspension and water temperature is established. Moreover the intensive mix is not able to compensate the negative influence of the low temperature. 3. The value of hydrogen index, mineralization and specific electric conductivity for minor river are growing from north-west to south-east along the coastal line. 4. By the main ionic composition of the minor rivers of Black Sea north-eastern coast can be classified as hydrocarbonate. The main characteristic (marker) of colt composition for the region is the sensible concentrations of potassium and sodium. 5. The amount of suspension substance in the river water and its feculence changes between 50 mg/dm3 дo 280 mg/dm3. In particle size distribution composition of river suspensions the politic fractions (up to 70%) are prevailed, sand and silt fractions are presented less (25%). 6. Suspension form content of microelements depends on general amount of suspension in river water. The suspension form migration is significant for lead, cobalt, tin and silver. Other metals "prefer" the solution forms and can be arranged approximately in the following: vanadium

  4. Polar bears and sea ice habitat change

    Science.gov (United States)

    Durner, George M.; Atwood, Todd C.; Butterworth, Andy

    2017-01-01

    The polar bear (Ursus maritimus) is an obligate apex predator of Arctic sea ice and as such can be affected by climate warming-induced changes in the extent and composition of pack ice and its impacts on their seal prey. Sea ice declines have negatively impacted some polar bear subpopulations through reduced energy input because of loss of hunting habitats, higher energy costs due to greater ice drift, ice fracturing and open water, and ultimately greater challenges to recruit young. Projections made from the output of global climate models suggest that polar bears in peripheral Arctic and sub-Arctic seas will be reduced in numbers or become extirpated by the end of the twenty-first century if the rate of climate warming continues on its present trajectory. The same projections also suggest that polar bears may persist in the high-latitude Arctic where heavy multiyear sea ice that has been typical in that region is being replaced by thinner annual ice. Underlying physical and biological oceanography provides clues as to why polar bear in some regions are negatively impacted, while bears in other regions have shown no apparent changes. However, continued declines in sea ice will eventually challenge the survival of polar bears and efforts to conserve them in all regions of the Arctic.

  5. Genetic control of biennial bearing in apple

    Science.gov (United States)

    Guitton, Baptiste; Kelner, Jean-Jacques; Velasco, Riccardo; Gardiner, Susan E.; Chagné, David; Costes, Evelyne

    2012-01-01

    Although flowering in mature fruit trees is recurrent, floral induction can be strongly inhibited by concurrent fruiting, leading to a pattern of irregular fruiting across consecutive years referred to as biennial bearing. The genetic determinants of biennial bearing in apple were investigated using the 114 flowering individuals from an F1 population of 122 genotypes, from a ‘Starkrimson’ (strong biennial bearer)בGranny Smith’ (regular bearer) cross. The number of inflorescences, and the number and the mass of harvested fruit were recorded over 6 years and used to calculate 26 variables and indices quantifying yield, precocity of production, and biennial bearing. Inflorescence traits exhibited the highest genotypic effect, and three quantitative trait loci (QTLs) on linkage group (LG) 4, LG8, and LG10 explained 50% of the phenotypic variability for biennial bearing. Apple orthologues of flowering and hormone-related genes were retrieved from the whole-genome assembly of ‘Golden Delicious’ and their position was compared with QTLs. Four main genomic regions that contain floral integrator genes, meristem identity genes, and gibberellin oxidase genes co-located with QTLs. The results indicated that flowering genes are less likely to be responsible for biennial bearing than hormone-related genes. New hypotheses for the control of biennial bearing emerged from QTL and candidate gene co-locations and suggest the involvement of different physiological processes such as the regulation of flowering genes by hormones. The correlation between tree architecture and biennial bearing is also discussed. PMID:21963613

  6. Genomic sequencing of Pleistocene cave bears

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

    2005-04-01

    Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

  7. Study of burned optimization for minor actinides in European Sodium Fast Reactor (ESFR) by use of moderator materials

    International Nuclear Information System (INIS)

    Ramos, R L; Villanueva, A J; Buiront, L

    2012-01-01

    The minor actinides (MA) burn up optimization in the European Sodium Fast Reactor (ESFR) core was studied by adding different moderating materials in the Minor Actinides Bearing Blanket subassemblies (MABB SA) using the ERANOS neutron code package. These SA are of hexagonal shape and are composed of pellets inside of pins. These pellets contain a mixture of uranium dioxide (UO 2 ) and americium dioxide (AmO 2 ). If some of these pins are replaced by other identical ones containing moderating material instead of minor actinides, a shift in the spectrum towards lower energies is expected, which might enhance the burn up performance. The results of this work demonstrated that the use of compounds of hydrogen and magnesium as moderators produces a shift in the neutron spectrum, improving the porcentual minor actinides consumption. ZrH 2 moderator material was found to exhibit the best performances for this propose, followed by MgO and MgAl 2 O 4 , in that order. The use of SiC, BeO, TiC, LiO 2 and ZrC material produced no effect on the shift of the neutron spectrum. For safety reasons, it seems hardly realistic to use hydrogenous compounds in sodium fast reactors. So, compounds with magnesium are selected to be placed into the pins to improve the porcentual minor actinides consumption. The ESFR core is composed by 817 SA, 453 of them are fuel SA, 247 are reflectors SA, 84 are MABB (Minor Actinides Bearing Blankets) SA and 33 are control and shutdown rods. When about half of the total pins in each MABB were substituted by moderator pins with MgO pellets (135 of 271 pins), the porcentual consumption of minor actinides was of 30.85 %, i.e., 227.22 kg of minor actinides were consumed out of 736.65 kg in the initial configuration. In the case where all the pins of the MABB contained pellets of minor actinides, the porcentual consumption of minor actinides was of 21.26 %, i.e., 312.13 kg of minor actinides were consumed of 1467.87 kg in the initial configuration (author)

  8. Comparison between the volumetric flow rate and pressure distribution for different kinds of sliding thrust bearing

    Directory of Open Access Journals (Sweden)

    O. Pourmehran

    2015-06-01

    Full Text Available In this paper a hydrodynamic journal sliding bearing, forming with two nonparallel surfaces that the lower surface moves with a unidirectional velocity and the upper surface is stationary shaped with exponential geometry is verified mathematically. The values of volumetric flow rate and distribution of pressure for incompressible lubricant flow between two supports in several conditions of velocity with different variables are determined. The results indicate that by increasing the amount of constant (m, the maximum oil pressure in the bearing will face an extreme decrease, and also by increasing the α coefficient, the rate of volumetric flow rate will decrease.

  9. Western Classical Music in the Minor Mode Is Slower (Except in the Romantic Period

    Directory of Open Access Journals (Sweden)

    Olaf Post

    2009-04-01

    Full Text Available Two studies are reported that examine the relationship between musical mode and tempo in Western classical music. In the first study, modes were determined for 331 works bearing the tempo markings largo, adagio, allegro, or presto. Slower tempo markings are significantly more likely to be associated with the minor mode in the case of music from the Baroque and Classical periods, whereas the reverse trend is observed in music from the Romantic period. In the second study, an analysis of 21 audio recordings of theme-and-variation keyboard movements (from all three style periods shows that variations written in the minor mode are performed more slowly than neighboring variations in the major mode. These tempo-related observations are largely consistent with research in speech prosody, which has shown that sad speakers speak relatively slowly.

  10. Race, region and risk: An examination of minority proximity to noxious facilities

    Energy Technology Data Exchange (ETDEWEB)

    Nieves, A.L. [Wheaton Coll., IL (United States)]|[Argonne National Lab., IL (United States); Nieves, L.A. [Argonne National Lab., IL (United States)

    1996-04-01

    The past decade has given rise to terms like environmental racism, eco-racism, and environmental inequities to characterize a disproportional distribution of environmental disamenities among minority communities. Much of the literature supports the contention that racial and ethnic minorities and low-income groups bear a disproportionate burden of risk from hazardous activities and substances in the environment. This study expands the scope of prior studies by employing county-level data for the entire nation and including a broad range of facility types associated with environmental disamenities. In addition, it addresses the issue of the distribution of noxious facilities among white and non-white populations in an attempt to determine the relative exposure to risk among different racial and ethnic groups. In addition, the authors also explore the relative importance of nonurban versus urban residence.

  11. Diffuse Subcutaneous Emphysema and Pneumomediastinum Secondary to a Minor Blunt Chest Trauma

    Directory of Open Access Journals (Sweden)

    Maximilian Andreas Storz

    2017-01-01

    Full Text Available Full medical evaluation is paramount for all trauma patients. Minor traumas are often overlooked, as they are thought to bear low injury potential. In this case report, we describe the case of a 48-year-old man presenting to our Emergency Department with mild to moderate right-sided shoulder and scapular pain following a fall from his own height ten days previously. Clinical and paraclinical investigations (CT revealed diffuse right shoulder pain, with crepitations on palpation of the neck, right shoulder, and right lateral chest wall. Computed tomography (CT demonstrated right-sided costal fractures (ribs 7 to 9, with diffuse subcutaneous emphysema and pneumomediastinum due to laceration of the visceral and parietal pleura and the adjacent lung parenchyma. In addition, a small ipsilateral pneumothorax was found. Surprisingly, the clinical status was only minimally affected by mild to moderate pain and minor functional impairment.

  12. On Controllable Elastohydrodynamic Fluid Film Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger

    This thesis gives a theoretical description of the active tilting-pad journal bearing (ATPJB). It provides the qualified reader with the tools to model an ATPJB, while staying clear of pitfalls. The model is based on well known techniques and allows for local stability analyses, harmonic stationary...... are performed for a tilting-pad journal bearing (TPJB) and an ATPJB under static conditions, followed by a generalisation to dynamic conditions (transient as well as stationary harmonic). These analyses will be of interest to experimentalists, since they permit experiments performed on scaled down test rigs...... the addition of a control system may just as well harm rotor-bearing performance as improve it....

  13. On the Characteristics of Misaligned Journal Bearings

    Directory of Open Access Journals (Sweden)

    Joon Young Jang

    2015-03-01

    Full Text Available Journal bearing misalignment arise generally from the shaft deformation under load, deflection of the shaft, manufacturing and assembly errors, improper installation, and asymmetric loading. During operations, misalignment has a considerable effect on the static and dynamic performances. It could cause wear, vibration and even system failure. In this article, a literature review of misalignment of the journal bearings is presented. The basic theory for the misalignment and some results for the circular journal bearing are also presented to show the general trends of the misalignment.

  14. Microeconomic analysis of military aircraft bearing restoration

    Science.gov (United States)

    Hein, G. F.

    1976-01-01

    The risk and cost of a bearing restoration by grinding program was analyzed. A microeconomic impact analysis was performed. The annual cost savings to U.S. Army aviation is approximately $950,000.00 for three engines and three transmissions. The capital value over an indefinite life is approximately ten million dollars. The annual cost savings for U.S. Air Force engines is approximately $313,000.00 with a capital value of approximately 3.1 million dollars. The program will result in the government obtaining bearings at lower costs at equivalent reliability. The bearing industry can recover lost profits during a period of reduced demand and higher costs.

  15. Camshaft bearing arrangement for overhead cam engine

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, M.

    1985-01-01

    In an assembly for an internal combustion engine comprising a cylinder block, a cylinder head detachably affixed to the cylinder block by a plurality of threaded fastening means, a plurality of poppet valves supported for reciprocation in the cylinder head and a camshaft for operating the poppet valves, the improvement is described comprising a cam carrier detachably affixed to the cylinder head and overlying the threaded fastening means, and a bearing cap affixed to the cam carrier. The cam carrier and the bearing cap have bearing surfaces for journaling the camshaft.

  16. Rotational decay torques of superconducting magnetic bearing

    International Nuclear Information System (INIS)

    Takahata, R.; Yotsuya, T.

    1991-01-01

    This paper proposes a superconducting magnetic bearing as one of application of a high critical temperature (Tc) oxide superconducting material. The authors have assembled new models of bearing with free rotation axis. In these models, superconductor, YBa 2 Cu 3 O X , prepared by the quench and melt growth (QMG) method was applied to the bearing section and a permanent magnet was used for a rotor. This development originated from the knowledge that YBa 2 Cu 3 O X prepared by QMG method had a stronger pinning force of magnetic flux than that of conventional superconductors

  17. Compressor ported shroud for foil bearing cooling

    Science.gov (United States)

    Elpern, David G [Los Angeles, CA; McCabe, Niall [Torrance, CA; Gee, Mark [South Pasadena, CA

    2011-08-02

    A compressor ported shroud takes compressed air from the shroud of the compressor before it is completely compressed and delivers it to foil bearings. The compressed air has a lower pressure and temperature than compressed outlet air. The lower temperature of the air means that less air needs to be bled off from the compressor to cool the foil bearings. This increases the overall system efficiency due to the reduced mass flow requirements of the lower temperature air. By taking the air at a lower pressure, less work is lost compressing the bearing cooling air.

  18. Deciphering the complete mitochondrial genome and phylogeny of the extinct cave bear in the Paleolithic painted cave of Chauvet.

    Science.gov (United States)

    Bon, Céline; Caudy, Nicolas; de Dieuleveult, Maud; Fosse, Philippe; Philippe, Michel; Maksud, Frédéric; Beraud-Colomb, Eliane; Bouzaid, Eric; Kefi, Rym; Laugier, Christelle; Rousseau, Bernard; Casane, Didier; van der Plicht, Johannes; Elalouf, Jean-Marc

    2008-11-11

    Retrieving a large amount of genetic information from extinct species was demonstrated feasible, but complete mitochondrial genome sequences have only been deciphered for the moa, a bird that became extinct a few hundred years ago, and for Pleistocene species, such as the woolly mammoth and the mastodon, both of which could be studied from animals embedded in permafrost. To enlarge the diversity of mitochondrial genomes available for Pleistocene species, we turned to the cave bear (Ursus spelaeus), whose only remains consist of skeletal elements. We collected bone samples from the Paleolithic painted cave of Chauvet-Pont d'Arc (France), which displays the earliest known human drawings, and contains thousands of bear remains. We selected a cave bear sternebra, radiocarbon dated to 32,000 years before present, from which we generated overlapping DNA fragments assembling into a 16,810-base pair mitochondrial genome. Together with the first mitochondrial genome for the brown bear western lineage, this study provides a statistically secured molecular phylogeny assessing the cave bear as a sister taxon to the brown bear and polar bear clade, with a divergence inferred to 1.6 million years ago. With the first mitochondrial genome for a Pleistocene carnivore to be delivered, our study establishes the Chauvet-Pont d'Arc Cave as a new reservoir for Paleogenetic studies. These molecular data enable establishing the chronology of bear speciation, and provide a helpful resource to rescue for genetic analysis archeological samples initially diagnosed as devoid of amplifiable DNA.

  19. Intersectionality, Recruitment and Selection : Ethnic Minority Candidates in Dutch Parties

    NARCIS (Netherlands)

    Mügge, L.M.

    2016-01-01

    This article aims to contribute to explanations why ethnic minority women outnumber ethnic minority men in national parliaments of European immigration countries. Extending the intersectional lens it asks: which ethnic minority candidates are recruited and selected? Drawing on nine elections

  20. The effect of body size evolution and ecology on encephalization in cave bears and extant relatives.

    Science.gov (United States)

    Veitschegger, Kristof

    2017-06-05

    The evolution of larger brain volumes relative to body size in Mammalia is the subject of an extensive amount of research. Early on palaeontologists were interested in the brain of cave bears, Ursus spelaeus, and described its morphology and size. However, until now, it was not possible to compare the absolute or relative brain size in a phylogenetic context due to the lack of an established phylogeny, comparative material, and phylogenetic comparative methods. In recent years, many tools for comparing traits within phylogenies were developed and the phylogenetic position of cave bears was resolved based on nuclear as well as mtDNA. Cave bears exhibit significantly lower encephalization compared to their contemporary relatives and intraspecific brain mass variation remained rather small. Encephalization was correlated with the combined dormancy-diet score. Body size evolution was a main driver in the degree of encephalization in cave bears as it increased in a much higher pace than brain size. In Ursus spelaeus, brain and body size increase over time albeit differently paced. This rate pattern is different in the highest encephalized bear species within the dataset, Ursus malayanus. The brain size in this species increased while body size heavily decreased compared to its ancestral stage. Early on in the evolution of cave bears encephalization decreased making it one of the least encephalized bear species compared to extant and extinct members of Ursidae. The results give reason to suspect that as herbivorous animals, cave bears might have exhibited a physiological buffer strategy to survive the strong seasonality of their environment. Thus, brain size was probably affected by the negative trade-off with adipose tissue as well as diet. The decrease of relative brain size in the herbivorous Ursus spelaeus is the result of a considerable increase in body size possibly in combination with environmental conditions forcing them to rest during winters.

  1. Public Perceptions of Bears and Management Interventions in Japan

    OpenAIRE

    Sakurai, Ryo; Jacobson, Susan K.

    2011-01-01

    Conservation of bears is a challenge globally. In Japan, Asiatic black bears (Ursus thibetanus) and brown bears (Ursus arctos) are considered a nuisance because of agricultural and property damage and personal human danger due to occasional human casualties. Reduction of human–bear conflicts in Japan would improve long-term conservation of bears and reduce risks to human health and safety. To understand Japanese perceptions of and experience with bears, we analyzed results of 5 public surveys...

  2. Management of brown bears (Ursus arctos) in Europe.

    OpenAIRE

    Klenzendorf, Sybille A.

    1997-01-01

    Management of Brown Bears (Ursus arctos) in Europe. Sybille A. Klenzendorf (Abstract) Successful conservation of brown bears (Ursus arctos) in Europe is associated with public acceptance of damages caused by bears. Recent increases in sheep depredation and beehive damage in central Austria resulted in the deaths of two bears there. Since bear numbers are low in most European populations, alternatives to the elimination of problem bears associated with dam...

  3. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    OpenAIRE

    Peter W. Tse; Dong Wang

    2017-01-01

    Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To exten...

  4. Vibration Characteristics of Hydrodynamic Fluid Film Pocket Journal Bearings

    Directory of Open Access Journals (Sweden)

    N. S. Feng

    2010-01-01

    Full Text Available Theoretical analyses of hydrodynamic fluid film bearings with different bearing profiles rely on solutions of the Reynolds equation. This paper presents an approach used for analysing the so-called pocket bearings formed from a combination of offset circular bearing profiles. The results show that the variation of the dynamic bearing characteristics with different load inclinations for the pocket bearings is less than that for the elliptic bearing counterpart. It is shown that the natural frequencies as well as the critical speeds, and hence the vibrational behaviour, can also be significantly different for an industrial rotor supported by the different bearings.

  5. We Can Recruit Minorities Into The Geosciences

    Science.gov (United States)

    O'Connell, S.

    2011-12-01

    Despite the dismal numbers, efforts to recruit minorities into the geosciences are improving, thanks in part to NSF's "Opportunities for Enhancing Diversity in the Geosciences" (OEDG) initiative. At Wesleyan University, a small liberal arts college in Connecticut, we have significantly increased our recruitment of minority students. Twenty percent (four students) of the class of 2013 are African American. Most of the recruitment is done on an individual basis and working in conjunction with the "Dean for Diversity and Student Engagement" and courting minority students in introductory classes. The Dean for Diversity and Student Engagement is aware of our interest in increasing diversity and that we are able to hire minority students during the academic year and through the summer with OEDG funds. When she identifies minority students who might be interested in the geosciences, she refers them to faculty in the Earth and Environmental Sciences Department. Our faculty can provide employment, mentoring and a variety of geo-related experiences. Courting students in introductory courses can include inviting them to lunch or other activity, and attending sports, theater or dance events in which they are participating. Not all efforts result in new majors. Courses in ancillary sciences may be stumbling blocks and higher grades in less demanding courses have lured some students into other majors. Nevertheless, we now have a large enough cohort of minority students so that minority students from other majors visit their friends in our labs. A critical mass? Even a student, who chooses another major, may continue an interest in geoscience and through outreach efforts and discussions with younger family members, may provide a bridge that becomes a conduit for future students.

  6. Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

    Science.gov (United States)

    Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

    2014-01-01

    We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears.

  7. Mercury biomagnification in polar bears ( Ursus maritimus)

    Science.gov (United States)

    Horton, T. W.; Blum, J. D.; Xie, Z.; Hren, M.; Chamberlain, C. P.

    2007-12-01

    Mercury biomagnification occurs in a variety of ecosystems resulting in greater potential for toxicological effects in higher-level trophic feeders. However, Hg transport pathways through different foodweb channels are not well known, particularly in high-latitude systems affected by atmospheric Hg deposition associated with snow and ice. Stable carbon and nitrogen isotope ratios and Hg concentrations determined for 26 late 19th and early 20th century polar bear hair specimens collected from cataloged museum collections elucidate relationships between high latitude marine foodweb structure and Hg transport pathways. Nitrogen and carbon isotopic compositions suggest that polar bears derive nutrition from both open water (pelagic) and ice associated (sympagic) foodweb channels. Correlation between Hg concentrations and nitrogen isotope compositions indicate mercury biomagnification occurred in most of the polar bears investigated. Interpretation of stable isotope based foodweb structure in concert with Hg concentrations further suggests that Hg biomagnification occurred to a greater degree in polar bears participating in pelagic foodweb channels.

  8. Bearings for the HFIR control plates

    International Nuclear Information System (INIS)

    Abbatiello, A.A.

    1975-08-01

    Recent accelerated wear of HFIR bearings seems to be a more advanced stage of the situation encountered in 1967. The latest observations are in agreement with the hypothesis that high-frequency impact loads at a 30 0 angle on these bearings are the apparent basic cause of their short life. In view of the limited possibilities for change at this stage of HFIR operation, the region of best payoff seems to be an increase in the load-carrying area at some acceptable sacrifice of low rolling friction. On this basis three types of bearings are proposed for test--two of these are journal types and one is a slider type. The next planned shutdown for major parts replacement provides an opportunity to test these modified bearing types in the HFIR under full mechanical operating conditions but without nuclear operation. The program is recommended for consideration and adoption. (U.S.)

  9. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  10. How to live with black bears

    Science.gov (United States)

    Lynn L. Rogers

    1988-01-01

    A black bear in camp requires caution but is not cause for great alarm. Most are timid enough to be scared away by yelling, waving, and banging pans. But a few are too accustomed to people to be bothered.

  11. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  12. AX-5 space suit bearing torque investigation

    Science.gov (United States)

    Loewenthal, Stuart; Vykukal, Vic; Mackendrick, Robert; Culbertson, Philip, Jr.

    1990-01-01

    The symptoms and eventual resolution of a torque increase problem occurring with ball bearings in the joints of the AX-5 space suit are described. Starting torques that rose 5 to 10 times initial levels were observed in crew evaluation tests of the suit in a zero-g water tank. This bearing problem was identified as a blocking torque anomaly, observed previously in oscillatory gimbal bearings. A large matrix of lubricants, ball separator designs and materials were evaluated. None of these combinations showed sufficient tolerance to lubricant washout when repeatedly cycled in water. The problem was resolved by retrofitting a pressure compensated, water exclusion seal to the outboard side of the bearing cavity. The symptoms and possible remedies to blocking are discussed.

  13. Cavitation Peening of Aerospace Bearings, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — High-value bearings are a critical part of the safety, reliability, cost and performance of modern aircraft. A typical passenger jet will have 100 to 175 high-valve...

  14. Hydrostatic radial bearing of centrifugal pump

    International Nuclear Information System (INIS)

    Skalicky, A.

    1976-01-01

    A hydrostatic radial pump is described characterized by the fact that part of the medium off-taken from delivery is used as a lubricating medium. Two additional bodies are placed alongside a hydrostatic bearing with coils in between them and the pump shaft; the coils have an opposite pitch. The feed channel for the hydrostatic bearing pocket is linked to delivery. The coil outlets are connected to the pump suction unit. Two rotating coils placed alongside the hydrostatic bearing will considerably simplify the communication channel design and reduce the dependence on the pump shaft deflections. The addition of another rotating coil in the close vicinity of the pump shaft or directly on the shaft further increases the efficiency. The bearing can be used in designing vertical circulating pumps for the cooling circuits of nuclear reactors. (J.B.)

  15. Novel nano bearings constructed by physical adsorption

    Science.gov (United States)

    Zhang, Yongbin

    2015-09-01

    The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have different interaction strengths with the lubricating fluid. It leads to different physical adsorption and slip properties of the lubricating fluid at the stationary solid wall respectively in these two subzones. It was found that a significant load-carrying capacity of the bearing can be generated for low lubricating film thicknesses, because of the strong physical adsorption and non-continuum effects of the lubricating film.

  16. Development of hydrodynamic micro-bearings

    Science.gov (United States)

    Wang, P.; Zhang, J.; Spikes, H. A.; Reddyhoff, T.; Holmes, A. S.

    2016-11-01

    This paper describes the modelling and testing of mm-scale hydrodynamic bearings which are being developed to improve the efficiency of a cm-scale turbine energy harvester, whose efficiency was previously limited by poorly lubricated commercial jewel-bearings. The bearings were fabricated using DRIE and their performance was assessed using a custom built MEMS tribometer. Results demonstrate that acceptably low friction is achieved when low viscosity liquid lubricants are used in combination with an appropriate choice of friction modifier additive. Further reduction in friction is demonstrated when the step height of bearing is adjusted in accordance with hydrodynamic theory. In parallel with the experiments, hydrodynamic lubricant modelling has been carried out to predict and further optimize film thickness and friction performance. Modelling results are presented and validated against experimental friction data.

  17. Effect of Surface Roughness on Hydrodynamic Bearings

    Science.gov (United States)

    Majumdar, B. C.; Hamrock, B. J.

    1981-01-01

    A theoretical analysis on the performance of hydrodynamic oil bearings is made considering surface roughness effect. The hydrodynamic as well as asperity contact load is found. The contact pressure was calculated with the assumption that the surface height distribution was Gaussian. The average Reynolds equation of partially lubricated surface was used to calculate hydrodynamic load. An analytical expression for average gap was found and was introduced to modify the average Reynolds equation. The resulting boundary value problem was then solved numerically by finite difference methods using the method of successive over relaxation. The pressure distribution and hydrodynamic load capacity of plane slider and journal bearings were calculated for various design data. The effects of attitude and roughness of surface on the bearing performance were shown. The results are compared with similar available solution of rough surface bearings. It is shown that: (1) the contribution of contact load is not significant; and (2) the hydrodynamic and contact load increase with surface roughness.

  18. cyclic -perimeter hydrocarbon ruthenium complexes bearing ...

    Indian Academy of Sciences (India)

    - cyclic -perimeter hydrocarbon ruthenium complexes bearing functionalized pyridyl diketones: Isolation of complexes with 2-N∩O and 4-N∩O bonding modes of ligands. Saphidabha L Nongbri Babulal Das Mohan Rao Kollipara.

  19. Cavitation Peening of Aerospace Bearings, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — High-value bearings are a critical part of the safety, reliability, cost and performance of modern aircraft. A typical passenger jet will have 100 to 175 high-valve...

  20. Effects of fluid inertia and bearing flexibility on the performance of finite length journal bearing

    Science.gov (United States)

    Javorova, Juliana; Alexandrov, Vassil

    2017-02-01

    The paper describes the theoretical study concerning the effect of lubricant inertia forces and deformability of the bearing elastic layer on the performance of a plane journal bearing. The problem is investigated for a Newtonian lubricant under isothermal and isoviscous conditions. The analysis considers the generalized Reynolds equation governing the flow of lubricant in the clearance space and the linear elasticity equation governing the displacement field in the bearing shell. An iterative numerical procedure with successive over relaxation is used to pressure distribution within the lubricated conjunction. Bearing performance characteristics have been presented for typically selected values of generalized Reynolds number Re* and elasticity parameters of the elastic liner. It has been observed that the combined effect of fluid inertia forces and bearing flexibility affects the performance characteristics of dynamically loaded journal bearing.

  1. Genetic relationships of extant brown bears (Ursus arctos) and polar bears (Ursus maritimus).

    Science.gov (United States)

    Cronin, Matthew A; MacNeil, Michael D

    2012-01-01

    Polar bears (Ursus maritimus) and brown bears (Ursus arctos) are closely related species for which extensive mitochondrial and nuclear phylogenetic comparisons have been made. We used previously published genotype data for 8 microsatellite DNA loci from 930 brown bears in 19 populations and 473 polar bears in 16 populations to compare the population genetic relationships of extant populations of the species. Genetic distances (Nei standard distance = 1.157), the proportion of private alleles (52% of alleles are not shared by the species), and Bayesian cluster analysis are consistent with morphological and life-history characteristics that distinguish polar bears and brown bears as different species with little or no gene flow among extant populations.

  2. Flywheel energy storage with superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.; Lynds, Jr., Lahmer; Hull, John R.

    1993-01-01

    A flywheel having superconductor bearings has a lower drag to lift ratio that translates to an improvement of a factor of ten in the rotational decay rate. The lower drag results from the lower dissipation of melt-processed YBCO, improved uniformity of the permanent magnet portion of the bearings, operation in a different range of vacuum pressure from that taught by the art, and greater separation distance from the rotating members of conductive materials.

  3. Is Polar Bear Hair Fiber Optic?

    Science.gov (United States)

    Koon, Daniel W.

    1998-05-01

    New direct measurement of high optical attenuation rates in polar bear hairs 2 8 dB mm in the visible and reanalysis of the data of Tributsch et al . Sol. Energy Mater. 21, 219 (1990) seem to rule out the UV waveguiding proposed by Grojean et al . Appl. Opt. 19, 339 (1980) . The case against fiber-optic polar bear hairs is summarized, and four conditions are given that any variation of the model of Grojean et al . would have to satisfy.

  4. KINEMATICS FRICTION PAIR FOR EXAMPLE NEEDLE BEARINGS

    OpenAIRE

    Jerzy NACHIMOWICZ; Robert KORBUT

    2014-01-01

    The present study concerns certain phenomena that take place in the needle roller bearing. The friction that generates the anti-torque of a friction pair is the major factor that influences the needle bearing’s wear. In the needle bearing there occur two predominant types of friction: the rolling friction and the sliding friction, and both are subject to examination. The study presents recordings and analysis of the movements of all needle bearing’s rolling elements. The examination was carri...

  5. Thermal effects in an accelerating thrust bearing

    Science.gov (United States)

    Doo, R.; Rodkiewicz, C. M.; Gupta, R. N.

    1985-01-01

    This study is mainly concerned with the development of transient temperatures in a thrust bearing. The effect of Prandtl number on temperatures was also investigated. All lubricant properties were assumed to be constant. It was found that the location of highest temperatures depended on the bearing ratio. The effect of Prandtl number on temperatures was small. However, its effect on the heat transfer at the surfaces was significant.

  6. Minority stress, psychosocial resources, and psychological distress among sexual minority breast cancer survivors.

    Science.gov (United States)

    Kamen, Charles; Jabson, Jennifer M; Mustian, Karen M; Boehmer, Ulrike

    2017-06-01

    Few studies have examined unique factors predicting psychological distress among sexual minority (i.e., lesbian and bisexual) women postbreast cancer diagnosis. The present study assessed the association of minority stress and psychosocial resource factors with depression and anxiety symptoms among sexual minority breast cancer survivors. Two hundred one sexual minority women who had ductal carcinoma in situ or Stage I-IV breast cancer participated in this study through the Love/Avon Army of Women. Self-report questionnaires were used to assess demographic and clinical factors, minority stress factors (discrimination, minority identity development, outness), psychosocial resources (resilience, social support), and psychological distress (anxiety and depression). These factors were included in a structural equation model, testing psychosocial resources as mediators between minority stress and psychological distress. There were no significant differences noted between lesbian and bisexual women. The final structural equation model demonstrated acceptable fit across all sexual minority women, χ2 = 27.83, p > .05; confirmatory fit index = 0.97, root-mean-square error of approximation = 0.04, Tucker-Lewis index = 0.93. The model accounted for significant variance in psychological distress (56%). Examination of indirect effects confirmed that exposure to discrimination was associated with distress via association with resilience. Factors unique to sexual minority populations, such as minority stress, may be associated with higher rates of psychological distress among sexual minority breast cancer survivors. However, presence of psychosocial resources may mediate relationships with distress in this population; enhancement of resilience, in particular, could be an aim of psychological intervention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  7. Rotordynamics and bearing design of turbochargers

    Science.gov (United States)

    Chen, Wen Jeng

    2012-05-01

    Turbochargers have gained significant attention in recent years. They are already widely used in automotive, locomotive, and marine applications with diesel engines. They are also applied in the aerospace application to increase the engine performance now. The turbochargers used in automotive and aerospace industry are very light-weight with operating speeds above 100,000 rpm. The turbochargers used in locomotive and marine applications are relatively heavy in size and power compared to the automotive and aerospace applications, and the maximum continuous operating speeds are around 30,000 rpm depending on the diesel engine power rating. Floating ring bushings, semi-floating dampers, ball bearings, and ball bearings with dampers are commonly used in automotive applications for small turbochargers. However, these bearings may not be appropriate for large turbochargers in locomotive and marine applications. Instead, multi-lobed bearings with and without squeeze film dampers are commonly used in these heavy-duty turbochargers. This paper deals with the rotordynamic characteristics of larger turbochargers in locomotive and marine applications. Various bearing designs are discussed. Bearing design parameters are studied and optimal values are suggested. Test results are also presented to support the analytical simulation.

  8. Adaptive Spindle Balancing Using Magnetically Levitated Bearings

    International Nuclear Information System (INIS)

    BARNEY, PATRICK S.; LAUFFER, JAMES P.; PETTEYS, REBECCA; REDMOND, JAMES M.; SULLIVAN, WILLIAM N.

    1999-01-01

    A technological break through for supporting rotating shafts is the active magnetic bearing (AMB). Active magnetic bearings offer some important advantages over conventional ball, roller or journal bearings such as reduced frictional drag, no physical contact in the bearing, no need for lubricants, compatibility with high vacuum and ultra-clean environments, and ability to control shaft position within the bearing. The disadvantages of the AMB system are the increased cost and complexity, reduced bearing stiffness and the need for a controller. Still, there are certain applications, such as high speed machining, biomedical devices, and gyroscopes, where the additional cost of an AMB system can be justified. The inherent actuator capabilities of the AMB offer the potential for active balancing of spindles and micro-shaping capabilities for machine tools, The work presented in this paper concentrates on an AMB test program that utilizes the actuator capability to dynamically balance a spindle. In this study, an unbalanced AMB spindle system was enhanced with an LMS (Least Mean Squares) algorithm combined with an existing PID (proportional, integral, differential) control. This enhanced controller significantly improved the concentricity of an intentionally unbalanced shaft. The study included dynamic system analysis, test validation, control design and simulation, as well as experimental implementation using a digital LMS controller

  9. Adaptive Spindle Balancing Using Magnetically Levitated Bearings

    Energy Technology Data Exchange (ETDEWEB)

    BARNEY,PATRICK S.; LAUFFER,JAMES P.; PETTEYS,REBECCA; REDMOND,JAMES M.; SULLIVAN,WILLIAM N.

    1999-09-20

    A technological break through for supporting rotating shafts is the active magnetic bearing (AMB). Active magnetic bearings offer some important advantages over conventional ball, roller or journal bearings such as reduced frictional drag, no physical contact in the bearing, no need for lubricants, compatibility with high vacuum and ultra-clean environments, and ability to control shaft position within the bearing. The disadvantages of the AMB system are the increased cost and complexity, reduced bearing stiffness and the need for a controller. Still, there are certain applications, such as high speed machining, biomedical devices, and gyroscopes, where the additional cost of an AMB system can be justified. The inherent actuator capabilities of the AMB offer the potential for active balancing of spindles and micro-shaping capabilities for machine tools, The work presented in this paper concentrates on an AMB test program that utilizes the actuator capability to dynamically balance a spindle. In this study, an unbalanced AMB spindle system was enhanced with an LMS (Least Mean Squares) algorithm combined with an existing PID (proportional, integral, differential) control. This enhanced controller significantly improved the concentricity of an intentionally unbalanced shaft. The study included dynamic system analysis, test validation, control design and simulation, as well as experimental implementation using a digital LMS controller.

  10. 28 CFR 301.314 - Establishing the amount of award.

    Science.gov (United States)

    2010-07-01

    ... ACCIDENT COMPENSATION Compensation for Work-Related Physical Impairment or Death § 301.314 Establishing the amount of award. (a) If a claim for Inmate Accident Compensation is approved, the amount of compensation... at the time of release. (b) In determining the amount of accident compensation to be paid, the...

  11. 46 CFR 308.303 - Amounts insured under interim binder.

    Science.gov (United States)

    2010-10-01

    ... 308.303 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE Second Seamen's War Risk Insurance § 308.303 Amounts insured under interim binder. The amounts insured are the amounts specified in the Second Seamen's War Risk Policy (1955) or as modified by shipping...

  12. 42 CFR 57.2207 - Amount of scholarship grant.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Amount of scholarship grant. 57.2207 Section 57... CONSTRUCTION OF TEACHING FACILITIES, EDUCATIONAL IMPROVEMENTS, SCHOLARSHIPS AND STUDENT LOANS Physician Shortage Area Scholarship Grants § 57.2207 Amount of scholarship grant. (a) The amount of the scholarship...

  13. Modeling metabolic response to changes of enzyme amount in ...

    African Journals Online (AJOL)

    Based on the work of Hynne et al. (2001), in an in silico model of glycolysis, Saccharomyces cerevisiae is established by introducing an enzyme amount multiple factor (.) into the kinetic equations. The model is aimed to predict the metabolic response to the change of enzyme amount. With the help of .α, the amounts of ...

  14. 7 CFR 1710.107 - Amount lent for acquisitions.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Amount lent for acquisitions. 1710.107 Section 1710... GUARANTEES Loan Purposes and Basic Policies § 1710.107 Amount lent for acquisitions. The maximum amount that will be lent for an acquisition is limited to the value of the property, as determined by RUS. If the...

  15. Modeling wilderness campsites: Factors that influence amount of impact

    Science.gov (United States)

    David N. Cole

    1991-01-01

    A standard campsite model is proposed and then manipulated to examine the influence of individual variables on amount of vegetation loss. Amount of impact is influenced by amount of use, vegetation fragility, vegetation density, and the degree to which activities are concentrated spatially on the site. Degree of concentration also influences the importance of the other...

  16. 12 CFR 347.120 - Computation of investment amounts.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Computation of investment amounts. 347.120... GENERAL POLICY INTERNATIONAL BANKING § 347.120 Computation of investment amounts. In computing the amount that may be invested in any foreign organization under §§ 347.117 through 347.119, any investments held...

  17. 20 CFR 362.12 - Computation of amount of reimbursement.

    Science.gov (United States)

    2010-04-01

    ... the cost of repair is the amount payable. (b) Depreciation in value of an item of personal property is... PROCEDURES EMPLOYEES' PERSONAL PROPERTY CLAIMS § 362.12 Computation of amount of reimbursement. (a) The amount awarded with regard to any item of personal property will not exceed its depreciated replacement...

  18. 42 CFR 410.152 - Amounts of payment.

    Science.gov (United States)

    2010-10-01

    ... SUPPLEMENTARY MEDICAL INSURANCE (SMI) BENEFITS Payment of SMI Benefits § 410.152 Amounts of payment. (a) General... reasonable charge. (h) Amount of payment: Pneumococcal vaccine. Medicare Part B pays for pneumococcal vaccine... (insofar as reasonable) charges of the CAH for the services. (l) Amount of payment: Flu vaccine. Medicare...

  19. 28 CFR 104.41 - Amount of compensation.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Amount of compensation. 104.41 Section 104.41 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) SEPTEMBER 11TH VICTIM COMPENSATION FUND OF 2001 Amount of Compensation for Eligible Claimants. § 104.41 Amount of compensation. As...

  20. 38 CFR 17.197 - Amount of aid payable.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Amount of aid payable. 17.197 Section 17.197 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Aid to States for Care of Veterans in State Homes § 17.197 Amount of aid payable. The amount of aid...

  1. Minor snake venom proteins: Structure, function and potential applications.

    Science.gov (United States)

    Boldrini-França, Johara; Cologna, Camila Takeno; Pucca, Manuela Berto; Bordon, Karla de Castro Figueiredo; Amorim, Fernanda Gobbi; Anjolette, Fernando Antonio Pino; Cordeiro, Francielle Almeida; Wiezel, Gisele Adriano; Cerni, Felipe Augusto; Pinheiro-Junior, Ernesto Lopes; Shibao, Priscila Yumi Tanaka; Ferreira, Isabela Gobbo; de Oliveira, Isadora Sousa; Cardoso, Iara Aimê; Arantes, Eliane Candiani

    2017-04-01

    Snake venoms present a great diversity of pharmacologically active compounds that may be applied as research and biotechnological tools, as well as in drug development and diagnostic tests for certain diseases. The most abundant toxins have been extensively studied in the last decades and some of them have already been used for different purposes. Nevertheless, most of the minor snake venom protein classes remain poorly explored, even presenting potential application in diverse areas. The main difficulty in studying these proteins lies on the impossibility of obtaining sufficient amounts of them for a comprehensive investigation. The advent of more sensitive techniques in the last few years allowed the discovery of new venom components and the in-depth study of some already known minor proteins. This review summarizes information regarding some structural and functional aspects of low abundant snake venom proteins classes, such as growth factors, hyaluronidases, cysteine-rich secretory proteins, nucleases and nucleotidases, cobra venom factors, vespryns, protease inhibitors, antimicrobial peptides, among others. Some potential applications of these molecules are discussed herein in order to encourage researchers to explore the full venom repertoire and to discover new molecules or applications for the already known venom components. Copyright © 2016. Published by Elsevier B.V.

  2. Rolling bearing fault feature learning using improved convolutional deep belief network with compressed sensing

    Science.gov (United States)

    Shao, Haidong; Jiang, Hongkai; Zhang, Haizhou; Duan, Wenjing; Liang, Tianchen; Wu, Shuaipeng

    2018-02-01

    The vibration signals collected from rolling bearing are usually complex and non-stationary with heavy background noise. Therefore, it is a great challenge to efficiently learn the representative fault features of the collected vibration signals. In this paper, a novel method called improved convolutional deep belief network (CDBN) with compressed sensing (CS) is developed for feature learning and fault diagnosis of rolling bearing. Firstly, CS is adopted for reducing the vibration data amount to improve analysis efficiency. Secondly, a new CDBN model is constructed with Gaussian visible units to enhance the feature learning ability for the compressed data. Finally, exponential moving average (EMA) technique is employed to improve the generalization performance of the constructed deep model. The developed method is applied to analyze the experimental rolling bearing vibration signals. The results confirm that the developed method is more effective than the traditional methods.

  3. A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring

    Science.gov (United States)

    Kerst, Stijn; Shyrokau, Barys; Holweg, Edward

    2018-05-01

    This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.

  4. Ancient DNA reveals differences in behaviour and sociality between brown bears and extinct cave bears.

    Science.gov (United States)

    Fortes, Gloria G; Grandal-d'Anglade, Aurora; Kolbe, Ben; Fernandes, Daniel; Meleg, Ioana N; García-Vázquez, Ana; Pinto-Llona, Ana C; Constantin, Silviu; de Torres, Trino J; Ortiz, Jose E; Frischauf, Christine; Rabeder, Gernot; Hofreiter, Michael; Barlow, Axel

    2016-10-01

    Ancient DNA studies have revolutionized the study of extinct species and populations, providing insights on phylogeny, phylogeography, admixture and demographic history. However, inferences on behaviour and sociality have been far less frequent. Here, we investigate the complete mitochondrial genomes of extinct Late Pleistocene cave bears and middle Holocene brown bears that each inhabited multiple geographically proximate caves in northern Spain. In cave bears, we find that, although most caves were occupied simultaneously, each cave almost exclusively contains a unique lineage of closely related haplotypes. This remarkable pattern suggests extreme fidelity to their birth site in cave bears, best described as homing behaviour, and that cave bears formed stable maternal social groups at least for hibernation. In contrast, brown bears do not show any strong association of mitochondrial lineage and cave, suggesting that these two closely related species differed in aspects of their behaviour and sociality. This difference is likely to have contributed to cave bear extinction, which occurred at a time in which competition for caves between bears and humans was likely intense and the ability to rapidly colonize new hibernation sites would have been crucial for the survival of a species so dependent on caves for hibernation as cave bears. Our study demonstrates the potential of ancient DNA to uncover patterns of behaviour and sociality in ancient species and populations, even those that went extinct many tens of thousands of years ago. © 2016 John Wiley & Sons Ltd.

  5. An exercise of 'genealogy' - reactivating minor knowledge

    Directory of Open Access Journals (Sweden)

    Ungurean, Ş.

    2011-01-01

    Full Text Available In fact, we do not endeavor to disqualify any form of knowledge. We do not desire to repeat the discourse of self-sufficiency – critical with others – claiming that only this type of thinking knowledge is valid. Our intention consists in attracting attention onto the singular fact, onto the radical contingency we constantly meet in our daily lives. Consequently, we suggest the sociologist's training be oriented towards the capacity to identify a problem starting from a single fact, in other words, we request heeding minor knowledge. The large majority of graduates in sociology work with this kind of reality. Within minor knowledge the possibility of hiding the fact that power endeavors to produce both the individual and the truth it needs, does not exist. In the case we are presenting, this minor knowledge found in travel diaries has generated some of the social representations on to which major political and historical decisions were founded.

  6. Minority Variants of Drug-Resistant HIV

    Science.gov (United States)

    Gianella, Sara; Richman, Douglas D.

    2010-01-01

    Minor drug-resistant variants exist in every HIV-infected patient. Since these minority variants are usually present at very low levels, they cannot be detected and quantified using conventional genotypic and phenotypic tests. Recently, several assays have been developed to characterize these low-abundance drug-resistant variants in the large genetically complex population present in every HIV-infected individual. The most important issue is, what results generated by these assays can predict clinical or treatment outcomes and might guide patient management in clinical practice. Cutoff-values for the detection of these low-abundance viral variants that predict increased risk of treatment failure should be determined. These thresholds may be specific for each mutation and treatment regimen. In this review we summarize the attributes and limitations of the currently available detection assays and review the existing information about both acquired and transmitted drug resistant minority variants. PMID:20649427

  7. Ethnic minority psychology: struggles and triumphs.

    Science.gov (United States)

    Sue, Stanley

    2009-10-01

    This article focuses on my interpretation of the history of ethnic minority psychology, using as a base the presentations of the contributing authors to this special issue of Cultural Diversity and Ethnic Minority Psychology. Because each contributing author has focused on a particular ethnic group or a particular aspect of history, my goal is to focus on 3 common issues and problems. First, what are the themes and issues that confronted African Americans, American Indians and Alaska Natives, Asian Americans, and Latinos? Second, what were characteristics of the ethnic leaders on whose shoulders we now stand? Third, what kinds of relationships existed between members of different ethnic minority groups? Copyright 2009 APA, all rights reserved.

  8. Peculiarities of radiodiagnosis of minor colon cancer

    International Nuclear Information System (INIS)

    Mushnikova, V.N.; Arablinskij, V.M.; Strekalovskij, V.P.; Markova, E.V.

    1985-01-01

    Basing on an analysis of the results of a multimodality study of 40 patients with minor (under 3 cm) colonic cancer the authors described in detail a method of its detection and classified its X-ray symptoms with relation to the tumor type and the degree of colon wall invasion. They showed the difficulty of radiodiagnosis of minor colonic cancer and its possibility in combination with endoscopic and morphological studies. For a better detection of the X-ray signs of minor colonic cancer one should successively use a number of methods including a polypositional study, pharmacological tests, spot roentgenography of the suspect parts of the colon using tight and semitight filling with barium meal and double contrast examination. The X-ray appearance of colonic cancer does not depend on its size: the smaller tumor size the less noticeable X-ray signs not only of malignancy but also of the tumor itself

  9. A hybrid liquid-phase precipitation (LPP) process in conjunction with membrane distillation (MD) for the treatment of the INEEL sodium-bearing liquid waste.

    Science.gov (United States)

    Bader, M S H

    2005-05-20

    A novel hybrid system combining liquid-phase precipitation (LPP) and membrane distillation (MD) is integrated for the treatment of the INEEL sodium-bearing liquid waste. The integrated system provides a "full separation" approach that consists of three main processing stages. The first stage is focused on the separation and recovery of nitric acid from the bulk of the waste stream using vacuum membrane distillation (VMD). In the second stage, polyvalent cations (mainly TRU elements and their fission products except cesium along with aluminum and other toxic metals) are separated from the bulk of monovalent anions and cations (dominantly sodium nitrate) by a front-end LPP. In the third stage, MD is used first to concentrate sodium nitrate to near saturation followed by a rear-end LPP to precipitate and separate sodium nitrate along with the remaining minor species from the bulk of the aqueous phase. The LPP-MD hybrid system uses a small amount of an additive and energy to carry out the treatment, addresses multiple critical species, extracts an economic value from some of waste species, generates minimal waste with suitable disposal paths, and offers rapid deployment. As such, the LPP-MD could be a valuable tool for multiple needs across the DOE complex where no effective or economic alternatives are available.

  10. Self-Esteem Comparisons among Intellectually Gifted Minority/Non-Minority Junior High Students.

    Science.gov (United States)

    Legin-Bucell, Cynthia; And Others

    Differences in self-esteem between 48 minority and 62 non-minority intellectually gifted and 75 intellectually average junior-high students were assessed using the Coopersmith Self-Esteem Inventory. Results indicated a higher level of self-esteem for the gifted students than for the control group. Significant differences were also found to exist…

  11. Tidal Tales of Minor Mergers: Star Formation in the Tidal Tails of Minor Mergers

    Science.gov (United States)

    Knierman, Karen; Monkiewicz, Jacqueline; Scowen, Paul; Groppi, Christopher

    2018-01-01

    While major mergers and their tidal debris are well studied, equal mass galaxy mergers are relatively rare compared to minor mergers (mass ratio HI for 15 minor mergers, are providing a larger sample of environments to study the threshold for star formation that can inform star formation models, particularly at low densities.

  12. The BCLA Minor: Business, Communication, and Liberal Arts Minor at Towson University

    Science.gov (United States)

    Mahin, Linda

    2008-01-01

    In this article, the author describes a cross-disciplinary minor that combines elements of business, communication, and the liberal arts. The BCLA Minor enhances employment opportunities and cultural awareness for students with majors in the Colleges of Business and Economics, Fine Arts and Communication, and Liberal Arts by integrating the…

  13. The Importance of Minority Teachers: Student Perceptions of Minority versus White Teachers

    Science.gov (United States)

    Cherng, Hua-Yu Sebastian; Halpin, Peter F.

    2016-01-01

    The demographic divide between teachers and students is of growing public concern. However, few studies have explicitly addressed the common argument that students, and particularly minority students, have more favorable perceptions of minority versus White teachers. Using data from the Measure of Effective Teaching study, we find that students…

  14. The Impact of Minority Stress on Mental Health and Substance Use among Sexual Minority Women

    Science.gov (United States)

    Lehavot, Keren; Simoni, Jane M.

    2011-01-01

    Objective: We examined the direct and indirect impact of minority stress on mental health and substance use among sexual minority women. Method: A combination of snowball and targeted sampling strategies was used to recruit lesbian and bisexual women (N = 1,381) for a cross-sectional, online survey. Participants (M age = 33.54 years; 74% White)…

  15. Minority Stress and Psychological Distress among Asian American Sexual Minority Persons

    Science.gov (United States)

    Szymanski, Dawn M.; Sung, Mi Ra

    2010-01-01

    The purpose of this study was to examine multiple minority stressors (i.e., heterosexist events, racist events, heterosexism in communities of color, racism in sexual minority communities, race-related dating and relationship problems, internalized heterosexism or homophobia, outness to family, and outness to world) as they relate to the…

  16. Women and minorities science bill becomes law

    Science.gov (United States)

    Showstack, Randy

    U.S. President Bill Clinton has signed into law a measure to establish a commission to identify and address problems associated with the recruitment, retention, and advancement of women, minorities, and persons with disabilities in science and engineering fields."Today, we have taken a positive step forward to strengthen and expand our high-tech workforce by ensuring that women, minorities, and persons with disabilities have the skills necessary to compete in the Information Age," said U.S. Rep. Connie Morella (R.-Md.), who introduced the measure.

  17. [Health and wellbeing of sexual minorities].

    Science.gov (United States)

    Barrientos, Jaime; Gómez, Fabiola; Cárdenas, Manuel; Gúzman, Mónica; Bahamondes, Joaquín

    2017-09-01

    Most of the information in Chile about health and wellbeing of sexual minorities refers to risk behaviors. To assess health and wellbeing in a sample of Chilean homosexual men and women. Spanish versions of the Satisfaction With Life Scale and Outcome Questionnaire-45 (OQ-45) were answered by 191 homosexual women and 256 homosexual men aged 18 to 67 years, from four Chilean cities. Lesbian women have better levels of satisfaction with life and adjustment in personal relationships than homosexual men. Eight percent of respondents had suicidal thoughts in some moment of their life. The information gathered in this work could help in the development of mental health policies for sexual minorities.

  18. Conflict Misleads Large Carnivore Management and Conservation: Brown Bears and Wolves in Spain.

    Science.gov (United States)

    Fernández-Gil, Alberto; Naves, Javier; Ordiz, Andrés; Quevedo, Mario; Revilla, Eloy; Delibes, Miguel

    2016-01-01

    Large carnivores inhabiting human-dominated landscapes often interact with people and their properties, leading to conflict scenarios that can mislead carnivore management and, ultimately, jeopardize conservation. In northwest Spain, brown bears Ursus arctos are strictly protected, whereas sympatric wolves Canis lupus are subject to lethal control. We explored ecological, economic and societal components of conflict scenarios involving large carnivores and damages to human properties. We analyzed the relation between complaints of depredations by bears and wolves on beehives and livestock, respectively, and bear and wolf abundance, livestock heads, number of culled wolves, amount of paid compensations, and media coverage. We also evaluated the efficiency of wolf culling to reduce depredations on livestock. Bear damages to beehives correlated positively to the number of female bears with cubs of the year. Complaints of wolf predation on livestock were unrelated to livestock numbers; instead, they correlated positively to the number of wild ungulates harvested during the previous season, the number of wolf packs, and to wolves culled during the previous season. Compensations for wolf complaints were fivefold higher than for bears, but media coverage of wolf damages was thirtyfold higher. Media coverage of wolf damages was unrelated to the actual costs of wolf damages, but the amount of news correlated positively to wolf culling. However, wolf culling was followed by an increase in compensated damages. Our results show that culling of the wolf population failed in its goal of reducing damages, and suggest that management decisions are at least partly mediated by press coverage. We suggest that our results provide insight to similar scenarios, where several species of large carnivores share the landscape with humans, and management may be reactive to perceived conflicts.

  19. Conflict Misleads Large Carnivore Management and Conservation: Brown Bears and Wolves in Spain.

    Directory of Open Access Journals (Sweden)

    Alberto Fernández-Gil

    Full Text Available Large carnivores inhabiting human-dominated landscapes often interact with people and their properties, leading to conflict scenarios that can mislead carnivore management and, ultimately, jeopardize conservation. In northwest Spain, brown bears Ursus arctos are strictly protected, whereas sympatric wolves Canis lupus are subject to lethal control. We explored ecological, economic and societal components of conflict scenarios involving large carnivores and damages to human properties. We analyzed the relation between complaints of depredations by bears and wolves on beehives and livestock, respectively, and bear and wolf abundance, livestock heads, number of culled wolves, amount of paid compensations, and media coverage. We also evaluated the efficiency of wolf culling to reduce depredations on livestock. Bear damages to beehives correlated positively to the number of female bears with cubs of the year. Complaints of wolf predation on livestock were unrelated to livestock numbers; instead, they correlated positively to the number of wild ungulates harvested during the previous season, the number of wolf packs, and to wolves culled during the previous season. Compensations for wolf complaints were fivefold higher than for bears, but media coverage of wolf damages was thirtyfold higher. Media coverage of wolf damages was unrelated to the actual costs of wolf damages, but the amount of news correlated positively to wolf culling. However, wolf culling was followed by an increase in compensated damages. Our results show that culling of the wolf population failed in its goal of reducing damages, and suggest that management decisions are at least partly mediated by press coverage. We suggest that our results provide insight to similar scenarios, where several species of large carnivores share the landscape with humans, and management may be reactive to perceived conflicts.

  20. Polar bears: the fate of an icon.

    Science.gov (United States)

    Fitzgerald, Kevin T

    2013-11-01

    Polar bears are one of the most iconic animals on our planet. Worldwide, even people who would never see one are drawn to these charismatic arctic ice hunters. They are the world's largest terrestrial carnivore, and despite being born on land, they spend most of their lives out on the sea ice and are considered a marine mammal. Current global studies estimate there are around 20,000 animals in some 19 discrete circumpolar populations. Aside from pregnant females denning in the winter months to give birth, the white bears do not hibernate. They spend their winters on the sea ice hunting seals, an activity they are spectacularly adapted for. Research on these animals is incredibly difficult because of the inhospitable surroundings they inhabit and how inaccessible they make the bears. For many years, the sum of our understanding of the natural history of polar bears came from tracks, scats, the remains of their kills, abandoned dens, and anecdotal observations of native hunters, explorers, and early biologists. Nonetheless, the last 40 years have seen a much better picture of their biology emerge thanks to, first, dedicated Canadian researchers and, later, truly international efforts of workers from many countries. Veterinarians have contributed to our knowledge of the bears by delivering and monitoring anesthesia, obtaining blood samples, performing necropsies, investigating their reproduction, conducting radiotelemetry studies, and examining their behavior. Recently, new technologies have been developed that revolutionize the study of the lives and natural history of undisturbed polar bears. These advances include better satellite radiotelemetry equipment and the development of remote-controlled miniature devices equipped with high-definition cameras. Such new modalities provide dramatic new insights into the life of polar bears. The remarkable degree of specialized adaptation to life on the sea ice that allowed the bears to be successful is the very reason that

  1. Wave Journal Bearing. Part 2: Experimental Pressure Measurements and Fractional Frequency Whirl Threshold for Wave and Plain Journal Bearings

    Science.gov (United States)

    Walker, James F.; Dimofte, Florin; Addy, Harold E., Jr.

    1995-01-01

    A new hydrodynamic bearing concept, the wave journal bearing, is being developed because it has better stability characteristics than plain journal bearings while maintaining similar load capacity. An analysis code to predict the steady state and dynamic performance of the wave journal bearing is also part of the development. To verify numerical predictions and contrast the wave journal bearing's stability characteristics to a plain journal bearing, tests were conducted at NASA Lewis Research Center using an air bearing test rig. Bearing film pressures were measured at 16 ports located around the bearing circumference at the middle of the bearing length. The pressure measurements for both a plain journal bearing and a wave journal bearing compared favorably with numerical predictions. Both bearings were tested with no radial load to determine the speed threshold for self-excited fractional frequency whirl. The plain journal bearing started to whirl immediately upon shaft start-up. The wave journal did not incur self-excited whirl until 800 to 900 rpm as predicted by the analysis. Furthermore, the wave bearing's geometry limited the whirl orbit to less than the bearing's clearance. In contrast, the plain journal bearing did not limit the whirl orbit, causing it to rub.

  2. Maintenance free gas bearing helium blower for nuclear plant

    Science.gov (United States)

    Molyneaux, A., Dr; Harris, M., Prof; Sharkh, S., Prof; Hill, S.; de Graaff, T.

    2017-08-01

    This paper describes the design, testing and operation of novel helium blowers used to recirculate the helium blanketing gas in the nuclear reactor used as a neutron source at the Institut Laue Langevan, Grenoble, France. The laser sintered shrouded centrifugal wheel operates at speeds up to 45000 rpm supported on helium lubricated hydrodynamic spiral groove bearings, and is driven by a sensorless permanent magnet motor. The entire machine is designed to keep the helium gas (polluted by a small amount of D2O) out of contact with any iron or copper materials which would contribute to the corrosion of parts of the circuit. It is designed to have zero maintenance during a lifetime of 40,000 hours of continuous operation. This paper will describe the spiral groove journal and thrust bearings. Design and manufacture of the 1 kW motor and centrifugal wheel will be explained including their CFD and FEA analyses. Measurements of rotor displacement will be presented showing the behaviour under factory testing as well as details of the measured centrifugal wheel and motor performances. Two machines are incorporated into the circuit to provide redundancy and the first blower has been in continuous operation since Jan 2015. The blower was designed, manufactured, assembled and tested in the UK using predominantly UK suppliers.

  3. Unconventional Bearing Capacity Analysis and Optimization of Multicell Box Girders

    Directory of Open Access Journals (Sweden)

    Jovan Tepic

    2014-01-01

    Full Text Available This study deals with unconventional bearing capacity analysis and the procedure of optimizing a two-cell box girder. The generalized model which enables the local stress-strain analysis of multicell girders was developed based on the principle of cross-sectional decomposition. The applied methodology is verified using the experimental data (Djelosevic et al., 2012 for traditionally formed box girders. The qualitative and quantitative evaluation of results obtained for the two-cell box girder is realized based on comparative analysis using the finite element method (FEM and the ANSYS v12 software. The deflection function obtained by analytical and numerical methods was found consistent provided that the maximum deviation does not exceed 4%. Multicell box girders are rationally designed support structures characterized by much lower susceptibility of their cross-sectional elements to buckling and higher specific capacity than traditionally formed box girders. The developed local stress model is applied for optimizing the cross section of a two-cell box carrier. The author points to the advantages of implementing the model of local stresses in the optimization process and concludes that the technological reserve of bearing capacity amounts to 20% at the same girder weight and constant load conditions.

  4. Acoustic emission signal processing for rolling bearing running state assessment using compressive sensing

    Science.gov (United States)

    Liu, Chang; Wu, Xing; Mao, Jianlin; Liu, Xiaoqin

    2017-07-01

    In the signal processing domain, there has been growing interest in using acoustic emission (AE) signals for the fault diagnosis and condition assessment instead of vibration signals, which has been advocated as an effective technique for identifying fracture, crack or damage. The AE signal has high frequencies up to several MHz which can avoid some signals interference, such as the parts of bearing (i.e. rolling elements, ring and so on) and other rotating parts of machine. However, acoustic emission signal necessitates advanced signal sampling capabilities and requests ability to deal with large amounts of sampling data. In this paper, compressive sensing (CS) is introduced as a processing framework, and then a compressive features extraction method is proposed. We use it for extracting the compressive features from compressively-sensed data directly, and also prove the energy preservation properties. First, we study the AE signals under the CS framework. The sparsity of AE signal of the rolling bearing is checked. The observation and reconstruction of signal is also studied. Second, we present a method of extraction AE compressive feature (AECF) from compressively-sensed data directly. We demonstrate the energy preservation properties and the processing of the extracted AECF feature. We assess the running state of the bearing using the AECF trend. The AECF trend of the running state of rolling bearings is consistent with the trend of traditional features. Thus, the method is an effective way to evaluate the running trend of rolling bearings. The results of the experiments have verified that the signal processing and the condition assessment based on AECF is simpler, the amount of data required is smaller, and the amount of computation is greatly reduced.

  5. Mass Loss Rates of Fasting Polar Bears.

    Science.gov (United States)

    Pilfold, Nicholas W; Hedman, Daryll; Stirling, Ian; Derocher, Andrew E; Lunn, Nicholas J; Richardson, Evan

    2016-01-01

    Polar bears (Ursus maritimus) have adapted to an annual cyclic regime of feeding and fasting, which is extreme in seasonal sea ice regions of the Arctic. As a consequence of climate change, sea ice breakup has become earlier and the duration of the open-water period through which polar bears must rely on fat reserves has increased. To date, there is limited empirical data with which to evaluate the potential energetic capacity of polar bears to withstand longer fasts. We measured the incoming and outgoing mass of inactive polar bears (n = 142) that were temporarily detained by Manitoba Conservation and Water Stewardship during the open-water period near the town of Churchill, Manitoba, Canada, in 2009-2014. Polar bears were given access to water but not food and held for a median length of 17 d. Median mass loss rates were 1.0 kg/d, while median mass-specific loss rates were 0.5%/d, similar to other species with high adiposity and prolonged fasting capacities. Mass loss by unfed captive adult males was identical to that lost by free-ranging individuals, suggesting that terrestrial feeding contributes little to offset mass loss. The inferred metabolic rate was comparable to a basal mammalian rate, suggesting that while on land, polar bears can maintain a depressed metabolic rate to conserve energy. Finally, we estimated time to starvation for subadults and adult males for the on-land period. Results suggest that at 180 d of fasting, 56%-63% of subadults and 18%-24% of adult males in this study would die of starvation. Results corroborate previous assessments on the limits of polar bear capacity to withstand lengthening ice-free seasons and emphasize the greater sensitivity of subadults to changes in sea ice phenology.

  6. A circumpolar monitoring framework for polar bears

    Science.gov (United States)

    Vongraven, Dag; Aars, Jon; Amstrup, Steven C.; Atkinson, Stephen N.; Belikov, Stanislav; Born, Erik W.; DeBruyn, T.D.; Derocher, Andrew E.; Durner, George M.; Gill, Michael J.; Lunn, Nicholas J.; Obbard, Martyn E.; Omelak, Jack; Ovsyanikov, Nikita; Peacock, Elizabeth; Richardson, E.E.; Sahanatien, Vicki; Stirling, Ian; Wiig, Øystein

    2012-01-01

    Polar bears (Ursus maritimus) occupy remote regions that are characterized by harsh weather and limited access. Polar bear populations can only persist where temporal and spatial availability of sea ice provides adequate access to their marine mammal prey. Observed declines in sea ice availability will continue as long as greenhouse gas concentrations rise. At the same time, human intrusion and pollution levels in the Arctic are expected to increase. A circumpolar understanding of the cumulative impacts of current and future stressors is lacking, long-term trends are known from only a few subpopulations, and there is no globally coordinated effort to monitor effects of stressors. Here, we describe a framework for an integrated circumpolar monitoring plan to detect ongoing patterns, predict future trends, and identify the most vulnerable polar bear subpopulations. We recommend strategies for monitoring subpopulation abundance and trends, reproduction, survival, ecosystem change, human-caused mortality, human–bear conflict, prey availability, health, stature, distribution, behavioral change, and the effects that monitoring itself may have on polar bears. We assign monitoring intensity for each subpopulation through adaptive assessment of the quality of existing baseline data and research accessibility. A global perspective is achieved by recommending high intensity monitoring for at least one subpopulation in each of four major polar bear ecoregions. Collection of data on harvest, where it occurs, and remote sensing of habitat, should occur with the same intensity for all subpopulations. We outline how local traditional knowledge may most effectively be combined with the best scientific methods to provide comparable and complementary lines of evidence. We also outline how previously collected intensive monitoring data may be sub-sampled to guide future sampling frequencies and develop indirect estimates or indices of subpopulation status. Adoption of this framework

  7. What Can We Learn?--The Algonquin Bear Attack.

    Science.gov (United States)

    Strickland, Dan

    1992-01-01

    Describes a bear attack in Algonquin Park in Lake Opeongo (Canada) in which a man and woman were killed. Hypothesizes that the bear deliberately preyed on its victims and concludes that the bear was physically normal. Despite this isolated attack, the chance of being attacked by a black bear when camping is virtually nonexistent. (KS)

  8. 77 FR 77070 - Black Bear Hydro Partners, LLC;

    Science.gov (United States)

    2012-12-31

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2727-086] Black Bear Hydro...: October 24, 2012. d. Submitted By: Black Bear Hydro Partners, LLC (Black Bear Hydro). e. Name of Project... designating Black Bear Hydro as the Commission's non-federal representative for carrying out informal...

  9. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in

  10. Critical Pressures of the Thrust Bearing Using a Magnetic Fluid

    OpenAIRE

    長屋, 幸助; 武田, 定彦; 佐藤, 淳; 井開, 重男; 関口, 肇; 斉藤, 登

    1990-01-01

    This paper proposes a thrust bearing lubricated by a magnetic fluid under a magnetic field. The critical pressures of the bearing versus the magnitude of the magnetic flux densities have been investigated experimentally. It is clarified that the critical pressures of the proposed bearing are larger than those of the normal lubricant bearing under high speeds.

  11. Noise reduction of rotating machinery by viscoelastic bearing supports

    NARCIS (Netherlands)

    Tillema, H.G.

    2003-01-01

    The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement

  12. 46 CFR 61.20-23 - Tailshaft clearance; bearing weardown.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tailshaft clearance; bearing weardown. 61.20-23 Section...; bearing weardown. (a) Water lubricated bearings, other than rubber, must be rebushed as follows: (1) Where the propelling machinery is located amidship, the after stern tube bearing must be rebushed when it is...

  13. The Biotribology of PEEK-on-HXLPE Bearings Is Comparable to Traditional Bearings on a Multidirectional Pin-on-disk Tester.

    Science.gov (United States)

    Baykal, Doruk; Siskey, Ryan S; Underwood, Richard J; Briscoe, Adam; Kurtz, Steven M

    2016-11-01

    All-polymer bearings involving polyetheretherketone (PEEK) have been proposed for orthopaedic applications because they may reduce stress shielding, reduce weight of the implants, reduce wear and risk of osteolysis, and prevent release of metal ions by replacing the metal articulating components. Little is known about the biotribology of all-polymer PEEK bearings, including the effects of cross-shear, which are relevant for implant longevity, especially in the hip, and increased temperature that may affect lubricant proteins and, hence, lubrication in the joint. Using pin-on-disk in vitro testing, we asked: (1) Can all-polymer bearing couples involving PEEK have a comparable or lower wear rate than highly crosslinked UHMWPE (HXLPE) on CoCr bearing couples? (2) Is the wear rate of PEEK bearing couples affected by the amount of cross-shear? (3) Is there a difference in wear mechanism and surface morphology for all-polymer bearing surfaces compared with UHMWPE (HXLPE) on CoCr? We simultaneously tested a total of 100 pin-on-disk couples (n = 10 per bearing couple) consisting of three traditional metal-on-UHMWPE and seven polymer-on-polymer bearings for 2 million cycles under physiologically relevant conditions and in accordance with ASTM F732. Using analysis of variance, we analyzed the effect of bearing surface topography and cross-shear on wear rate. The changes in surface topography were evaluated using optical microscopy. Sample size was sufficient to provide 80% power to detect a difference of 1.4 mm 3 /MC in average wear rates of bearing couples. The combined wear rates of all-polymer bearing couples were not different than traditional bearing couples. With the numbers available, the PEEK and HXLPE bearing couple had a mean wear rate (WR: mean ± SD) of 0.9 ± 1.1 mm 3 /MC (95% confidence interval [CI], 0.2-1.5 mm 3 /MC), which was not different than the wear rate of the CoCr and HXLPE bearing couple (1.6 ± 2.0 mm 3 /MC; 95% CI, 0.4-2.8 mm 3 /MC; mean difference

  14. Groundwater and surface-water interactions near White Bear Lake, Minnesota, through 2011

    Science.gov (United States)

    Jones, Perry M.; Trost, Jared J.; Rosenberry, Donald O.; Jackson, P. Ryan; Bode, Jenifer A.; O'Grady, Ryan M.

    2013-01-01

    The U.S. Geological Survey, in cooperation with the White Bear Lake Conservation District, the Minnesota Pollution Control Agency, the Minnesota Department of Natural Resources, and other State, county, municipal, and regional planning agencies, watershed organizations, and private organizations, conducted a study to characterize groundwater and surface-water interactions near White Bear Lake through 2011. During 2010 and 2011, White Bear Lake and other lakes in the northeastern part of the Twin Cities Metropolitan Area were at historically low levels. Previous periods of lower water levels in White Bear Lake correlate with periods of lower precipitation; however, recent urban expansion and increased pumping from the Prairie du Chien-Jordan aquifer have raised the question of whether a decline in precipitation is the primary cause for the recent water-level decline in White Bear Lake. Understanding and quantifying the amount of groundwater inflow to a lake and water discharge from a lake to aquifers is commonly difficult but is important in the management of lake levels. Three methods were used in the study to assess groundwater and surface-water interactions on White Bear Lake: (1) a historical assessment (1978-2011) of levels in White Bear Lake, local groundwater levels, and their relation to historical precipitation and groundwater withdrawals in the White Bear Lake area; (2) recent (2010-11) hydrologic and water-quality data collected from White Bear Lake, other lakes, and wells; and (3) water-balance assessments for White Bear Lake in March and August 2011. An analysis of covariance between average annual lake-level change and annual precipitation indicated the relation between the two variables was significantly different from 2003 through 2011 compared with 1978 through 2002, requiring an average of 4 more inches of precipitation per year to maintain the lake level. This shift in the linear relation between annual lake-level change and annual precipitation

  15. Influence of Fines Content on the Mechanical Behavior of Methane Hydrate-Bearing Sediments

    Science.gov (United States)

    Hyodo, Masayuki; Wu, Yang; Nakashima, Koji; Kajiyama, Shintaro; Nakata, Yukio

    2017-10-01

    Methane hydrate-bearing sediments with different amounts of fines content and at three densities were artificially prepared under controlled temperature and pressure conditions. The void ratios of specimens after isotropic consolidation tend to decrease with a rise in fines content. The fines particles enter into the pore space between sand grains and densify the specimens. A series of triaxial compression tests were performed to systematically investigate the influences of fines content and density on the shear properties of hydrate-free sediments and methane hydrate-bearing sediments. The test results demonstrate that a rise in fines content within methane hydrate-bearing sediments significantly enhances peak shear strength and promotes dilation behavior. These influences are particularly prominent for specimens at loose packing state. A decrease in void ratio increases the shear strength and stiffness of hydrate-free sediments and methane hydrate-bearing sediments containing fines content of 0% and 8.9%. It is noted that the formation of methane hydrate in samples with varying amounts of fines content increases the stress ratios at the critical state. The addition of fines particles into coarse-grained sand grains alters the internal microstructure of sand matrix and the hydrate formation pattern in the pore space between sand grains and fines particles.

  16. Analysis of Solid Contamination in Ball Bearing Through Acoustic Emission Signals

    Directory of Open Access Journals (Sweden)

    Sheriff K.A.I.

    2017-09-01

    Full Text Available Acoustic emission is one of the effective techniques used for the condition monitoring of rolling element bearings. Contamination is one of the major reasons for bearing early failure due to presence of solid particle in lubricant grease. In most cases, outer race is stationary and the inner race is attached to the rotating assembly. The lubrication is very essential for the bearing to perform under various demanding conditions. The main aim of this project is to analyze the effect of contamination of lubricant by solid particles on the dynamic behavior of rolling bearing. Green sand at three concentration levels 5%, 15%, 25% and different particle sizes 75 μm, 106 μm and 150μm is used to contaminate the lubricant. Experimental tests have been performed for different load and speed condition in good and contaminated ball bearings lubricated with grease. The trends in the amount of AE waves affected by the contamination of the grease were determined. Acoustic emission signals were analyzed in terms of RMS, kurtosis, and peak-peak.

  17. Investigation of Bearing Axial Cracking: Benchtop and Full-Scale Test Results

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gould, Benjamin [Argonne National Lab. (ANL), Argonne, IL (United States); Greco, Aaron [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-08-16

    The most common failure mode in wind turbine gearboxes is axial cracking in intermediate and high-speed-stage bearings, also commonly called white-etching cracks (WECs). Although these types of cracks have been reported for over a decade, the conditions leading to WECs, the process by which this failure culminates, and the reasons for their apparent prevalence in wind turbine gearboxes are all highly debated. This paper summarizes the state of a multipronged research effort to examine the causes of WECs in wind turbine gearbox bearings. Recent efforts have recreated WECs on a benchtop test rig in highly loaded sliding conditions, wherein it was found that the formation of a dark etching microstructure precedes the formation of a crack, and a crack precedes the formation of white-etching microstructure. A cumulative frictional sliding energy criterion has been postulated to predict the presence of WECs. Bearing loads have also been measured and predicted in steady state and transient drivetrain operations in dynamometer testing. In addition, both loads and sliding at full scale will be measured in planned uptower drivetrain testing. If the cumulative frictional sliding energy is the dominant mechanism that causes WECs, understanding the amount of frictional sliding energy that wind turbine bearings are subjected to in typical operations is the next step in the investigation. If highly loaded sliding conditions are found uptower, similar to the examined benchtop levels, appropriate mitigation solutions can be examined, ranging from new bearing coatings and improved lubricants to changes in gearbox designs and turbine operations.

  18. Ball bearing defect models: A study of simulated and experimental fault signatures

    Science.gov (United States)

    Mishra, C.; Samantaray, A. K.; Chakraborty, G.

    2017-07-01

    Numerical model based virtual prototype of a system can serve as a tool to generate huge amount of data which replace the dependence on expensive and often difficult to conduct experiments. However, the model must be accurate enough to substitute the experiments. The abstraction level and details considered during model development depend on the purpose for which simulated data should be generated. This article concerns development of simulation models for deep groove ball bearings which are used in a variety of rotating machinery. The purpose of the model is to generate vibration signatures which usually contain features of bearing defects. Three different models with increasing level-of-complexity are considered: a bearing kinematics based planar motion block diagram model developed in MATLAB Simulink which does not explicitly consider cage and traction dynamics, a planar motion model with cage, traction and contact dynamics developed using multi-energy domain bond graph formalism in SYMBOLS software, and a detailed spatial multi-body dynamics model with complex contact and traction mechanics developed using ADAMS software. Experiments are conducted using Spectra Quest machine fault simulator with different prefabricated faulted bearings. The frequency domain characteristics of simulated and experimental vibration signals for different bearing faults are compared and conclusions are drawn regarding usefulness of the developed models.

  19. Effect of semi-circular wavy liner on performance of journal bearing

    Science.gov (United States)

    Sheriff, Jamaluddin Md.; Osman, Kahar; Asral

    2012-06-01

    The amount of lubricant present in a bearing can affect its performance. This study compares the load carrying capacity of wavy and smooth surfaces liner bearing so that the potential advantages of the former could be identified. Both types of bearing used palm oil as lubricant and computational analysis was developed to predict the numerical data for full film lubrication condition. The bearing model was 60 mm in diameter and its ratio of length to diameter was 0.5 with clearance and amplitude of 250μm and 200μm respectively. All cases studied included temperature effect under steady flow conditions with speed between 200 and 5000 rpm. The results show, for low eccentricity ratio, semi circular wavy liner bearings were able to produce higher load carrying capacity. The results also show that the overall temperature drop for wavy liner surfaces was higher for all test conditions. The shaft speeds, however, have no direct effect on the magnitude of the load carrying capacity.

  20. Synergistic modulation by chloride and organic phosphates of hemoglobin from bear (Ursus arctos).

    Science.gov (United States)

    Coletta, M; Condo, S G; Scatena, R; Clementi, M E; Baroni, S; Sletten, S N; Brix, O; Giardina, B

    1994-03-11

    The oxygen binding properties of hemoglobin (Hb) from brown bear (Ursus arctos) have been studied focussing on the effect of heterotropic ligands, and the behaviour has been compared with that of human HbA, taken as a prototype of mammalian Hbs. It has been observed that in bear Hb chloride ions and 2,3-diphosphoglyceric acid (Gri(2,3)P2) can modulate the oxygen affinity in a synergistic way such that their individual effect is enhanced whenever they are both present in saturating amounts. The thermodynamic analysis of such a feature indicates that in bear Hb there are two classes of chloride binding sites, one acting synergistically with Gri(2,3)P2 and another one, which likely overlaps with the organic phosphate interaction cleft, and is therefore fully operative only in the absence of Gri(2,3)P2. The behaviour of the last site is similar to that observed in human HbA, where the effect of Cl- and Gri(2,3)P2 is mutually exclusive. The interaction energy between chloride and Gri(2,3)P2 synergistic binding sites appears to be O2-linked so that the interplay may have a relevant physiological role in modulating the oxygen transport in brown bear. This behaviour is associated with a marked pH-dependence of the oxygenation enthalpy in bear Hb, such that under acidotic and hypercloruremic conditions, oxygen supply to peripheral tissues could be maintained essentially unaltered even under low temperature conditions.

  1. Comparative analysis of fecal microbiota and intestinal microbial metabolic activity in captive polar bears.

    Science.gov (United States)

    Schwab, Clarissa; Gänzle, Michael

    2011-03-01

    The composition of the intestinal microbiota depends on gut physiology and diet. Ursidae possess a simple gastrointestinal system composed of a stomach, small intestine, and indistinct hindgut. This study determined the composition and stability of fecal microbiota of 3 captive polar bears by group-specific quantitative PCR and PCR-DGGE (denaturing gradient gel electrophoresis) using the 16S rRNA gene as target. Intestinal metabolic activity was determined by analysis of short-chain fatty acids in feces. For comparison, other Carnivora and mammals were included in this study. Total bacterial abundance was approximately log 8.5 DNA gene copies·(g feces)-1 in all 3 polar bears. Fecal polar bear microbiota was dominated by the facultative anaerobes Enterobacteriaceae and enterococci, and the Clostridium cluster I. The detection of the Clostridium perfringens α-toxin gene verified the presence of C. perfringens. Composition of the fecal bacterial population was stable on a genus level; according to results obtained by PCR-DGGE, dominant bacterial species fluctuated. The total short-chain fatty acid content of Carnivora and other mammals analysed was comparable; lactate was detected in feces of all carnivora but present only in trace amounts in other mammals. In comparison, the fecal microbiota and metabolic activity of captive polar bears mostly resembled the closely related grizzly and black bears.

  2. An investigation into failure analysis of interfering part of a steam turbine journal bearing

    Directory of Open Access Journals (Sweden)

    M. Mehdizadeh

    2014-10-01

    Full Text Available Journal bearings as so sensitive parts of steam turbines are very susceptible to failure through different mechanisms of wear, fatigue and crush during service conditions. Failure occurring through these mechanisms lead to turbine completely shut down as a result of interfering in working conditions of bearing different parts. In this research, failed interfered part of a journal bearing related to a 320,000 kW steam turbine was examined. Failure analysis investigations were performed by utilizing of stereographic, optical microscopy, scanning electron microscopy (SEM, energy-dispersive X-ray spectroscopy (EDS analysis and hardness test. Surface crush, large amounts of surface cracks, no noticeable changes of failed surface chemical composition and microstructure with significant hardness improvement were the main obtained results. The studies were revealed that the bearing part loosing and inappropriate clearance can produce relative displacements under cyclic gradient loading. This condition was detrimental for the service life of turbine journal bearing via failure through fretting fatigue mechanism.

  3. Improving Underrepresented Minority Student Persistence in STEM

    Science.gov (United States)

    Estrada, Mica; Burnett, Myra; Campbell, Andrew G.; Campbell, Patricia B.; Denetclaw, Wilfred F.; Gutiérrez, Carlos G.; Hurtado, Sylvia; John, Gilbert H.; Matsui, John; McGee, Richard; Okpodu, Camellia Moses; Robinson, T. Joan; Summers, Michael F.; Werner-Washburne, Maggie; Zavala, MariaElena

    2016-01-01

    Members of the Joint Working Group on Improving Underrepresented Minorities (URMs) Persistence in Science, Technology, Engineering, and Mathematics (STEM)--convened by the National Institute of General Medical Sciences and the Howard Hughes Medical Institute--review current data and propose deliberation about why the academic "pathways"…

  4. Early adolescent music preferences and minor delinquency

    NARCIS (Netherlands)

    ter Bogt, T.F.M.; Keijsers, L.G.M.T.; Meeus, W.H.J.

    2013-01-01

    Objectives: To test Music Marker Theory (MMT) positing that early adolescents’ preferences for nonmainstream types of popular music indicate concurrent and later minor delinquency. Methods: MMT was tested in a 4-year longitudinal study (n = 309). Results: The results showed that early fans of

  5. Minority Students: Understanding a New Clientele.

    Science.gov (United States)

    Tarmy Rudnick, Diane

    1985-01-01

    Provides data on recruitment, family, academic background, attitudes, and extracurricular/cultural interests of 1288 minority engineering technology students. Indicates that although their high school achievement was superior to average freshmen, their limited finances and low self-esteem remain as problems. Recommendations for addressing the…

  6. Abyssinian Scimitarbill Rhinopomastus minor cabanisi in Tanzania ...

    African Journals Online (AJOL)

    On 27 December 2013, between the Tarangire National Park entrance and Makuyuni,. Tanzania, at 3°33´ S, 36°04´ E, altitude 1073 m, I stopped at 11:00 to photograph an aca- cia tree with nine traditional beehives in it. To my amazement I saw two Abyssinian. Scimitarbills Rhinopomastus minor entering a hole on the ...

  7. Minor neurological dysfunction in children with dyslexia

    NARCIS (Netherlands)

    Punt, Marja; De Jong, Marianne; De Groot, Erik; Hadders-Algra, Mijna

    2010-01-01

    AIM To improve understanding of brain function in children with severe dyslexia in terms of minor neurological dysfunctions (MNDs). METHOD One hundred and four children (81 males, 23 females; age range 7-12y; mean age 9y 7mo, SD 1y 2mo;) with severe dyslexia (the presence of a Full-scale IQ score of

  8. [Discrimination and depression in ethnic minority groups

    NARCIS (Netherlands)

    Ikram, U.Z.; Snijder, M.B.; Fassaert, T.J.; Schene, A.H.; Kunst, A.E.; Stronks, K.

    2015-01-01

    OBJECTIVE: To determine the contribution of perceived ethnic discrimination to depression in various ethnic minority groups in Amsterdam. DESIGN: Cross-sectional study. METHOD: We included participants aged 18-70 years of Dutch (n = 1,744), Asian Surinamese (n = 1,126), Creole Surinamese (n =

  9. The SWOT Team Approach: Focusing on Minorities.

    Science.gov (United States)

    Gorski, Susan E.

    1991-01-01

    Underscores the applicability of marketing principles to minority student recruitment and retention at community colleges. Proposes the assessment of an institution's Strengths, Weaknesses, and external Opportunities and Threats (SWOT) to strategically market the college. Considers the development of a plan for action based on the SWOT analysis.…

  10. Language and Cultural Minorities Resource Catalog.

    Science.gov (United States)

    Maine State Dept. of Educational and Cultural Services, Augusta.

    The revised edition of the resource catalog lists nearly 1,000 print and non-print materials for use in Maine schools where close to 7,000 children of linguistic minorities are enrolled. There are 19 sections on these groups or topics: Afghan, Asian and refugee, bilingual education, Chinese, civil rights, Eastern Europe, English as a Second…

  11. The Truth about Mentoring Minorities: Race Matters.

    Science.gov (United States)

    Thomas, David A.

    2001-01-01

    A 3-year study of mentoring patterns at 3 corporations reveals that whites and minorities follow distinct patterns of advancement and should be mentored in very different ways. Cross-race mentoring must acknowledge issues of negative stereotypes, role modeling, peer resentment, skepticism about intimacy, and network management. (JOW)

  12. Learning Disability and Ethnic Minority Discrimination.

    Science.gov (United States)

    Drucker, Howard; And Others

    Discrimination is discussed as it applies to the exclusion of racial minorities in classes for children with learning disabilities. The authors contend that this type of racial discrimination is prevalent nationwide (as illustrated by results of a national survey), and that the definition of learning disabilities and how it is operationalized has…

  13. Education for minority groups: a case study

    African Journals Online (AJOL)

    Erna Kinsey

    1993:79) definition is more appropriate: a minority is a group that is numerically inferior to the rest of the population of .... the Elimination of all Forms of Racial Discrimination (United Nations,. 1965, articles 1(4) and 2):. Special measures must be ...

  14. Stillbirth in an Anglophone minority of Canada

    DEFF Research Database (Denmark)

    Auger, Nathalie; Daniel, Mark; Mortensen, Laust Hvas

    2015-01-01

    OBJECTIVES: We assessed trends in stillbirth over time for Francophones and Anglophones of Quebec, a large Canadian province with publically funded health care and an English-speaking minority. METHODS: We calculated stillbirth rates for Francophones and Anglophones, and estimated hazard ratios (...

  15. Multiculturalism and legal autonomy for cultural minorities

    Directory of Open Access Journals (Sweden)

    Morten Ebbe Juul Nielsen

    2013-11-01

    Full Text Available Does multiculturalism imply that certain cultural minorities – nomos groups, whose cultural conceptions extend in important ways into views about the law – should have forms of legal autonomy that go beyond normal multicultural accommodations such as exemptions and special protection? In other words: should we allow «minority jurisdictions» for multicultural reasons and give certain minorities powers of legislation and adjudication on certain issues? The paper sketches how one might arrive at such a conclusion given some standard multicultural reasoning, and then proceeds by examining eight key rejoinders to such a proposal. None of these rejoinders provide by themselves knockdown arguments against extending multicultural rights to forms of legal autonomy, but together they do provide a basis for some skepticism about the cogency and desirability of at least more ambitious forms of legal autonomy for cultural minorities within a liberal framework.http://dx.doi.org/10.5324/eip.v7i2.1798

  16. Partitioning and Transmutation of minor actinides

    International Nuclear Information System (INIS)

    Koch, L.; Wellum, R.

    1991-01-01

    The partitioning of minor actinides from spent fuels and their transmutation into short-lived fission products has been the topic of two dedicated meetings organized jointly by the European Commission and the OECD. The conclusion of the last meeting in 1980, in short, was that partitioning and transmutation of minor actinides, especially in fast reactors, seemed possible. However, the incentive, which would be a reduction of the radiological hazard to the public, was too small if long-lived fission products were not included. Furthermore this meeting showed that minor actinide targets or possible nuclear fuels containing minor actinides for transmutation had not yet been developed. The European Institute for Transuranium Elements took up this task and has carried it out as a small activity for several years. Interests expressed recently by an expert meeting of the OECD/NEA (Paris, 25 April 1989), which was initiated by the proposed Japanese project Omega, led us to the conclusion that the present state of knowledge should be looked at in a workshop environment. Since the Japanese proposal within the project Omega is based on a broader approach we needed this evaluation to assess the relevance of our present activity and wanted to identifiy additional studies which might be needed to cover possible future demands from the public. This workshop was therefore organized, and participants active in the field from EC countries, the USA and Japan were invited

  17. Ethnic Minority Women. CRE Factsheet. Revised.

    Science.gov (United States)

    Commission for Racial Equality, London (England).

    This factsheet contains information about the numbers and status of ethnic minority women in Great Britain. In 1991, the last full count, 1.5 million women in Britain classified themselves as other than White. Women from all ethnic groups are less likely to be economically active (paid for work or looking for it) than men. However, among ethnic…

  18. Ethnic Minorities in Britain. CRE Factsheet. Revised.

    Science.gov (United States)

    Commission for Racial Equality, London (England).

    This factsheet provides information about the status of ethnic minorities in Great Britain. At the 1991 census, just over 3 million (5.5%) of the people in Britain did not classify themselves as White. About half were of South Asian descent (Indian, Pakistani, and Bangladeshi) and 30% were Black. Nearly 7.3% of the British population had been born…

  19. Nutritional composition of minor indigenous fruits

    DEFF Research Database (Denmark)

    Shajib, Md. Tariqul Islam; Kawser, Mahbuba; Miah, Md. Nuruddin

    2013-01-01

    In line of the development of a food composition database for Bangladesh, 10 minor indigenous fruits were analysed for their nutrient composition comprising ascorbic acid, carotenoids and mineral values. Nutrient data obtained have been compared with published data reported in different literatur...

  20. Drugs and Minorities. Research Issues 21.

    Science.gov (United States)

    Austin, Gregory A., Ed.; And Others

    This volume contains summaries of the latest research focusing on the issue of the extent of drug use and abuse among racial and ethnic minorities and the factors influencing it. Taken into consideration are age and sex differences among users, narcotics addiction, socioeconomic influences, cultural factors, racial factors, demographic factors,…

  1. LIMITING ORGANISATIONAL RIGHTS OF MINORITY UNIONS ...

    African Journals Online (AJOL)

    Administrator

    1996-02-19

    Feb 19, 1996 ... market in recent times can be attributed, in part, to inter-union rivalry.1 Minority unions ... March 2013 – resulting in a negative impact on South Africa's GDP and currency depreciation. In. 2013, the .... Organisational rights are regulated by Part A and B of Chapter 111 of the LRA, and the right to strike is ...

  2. Toric ideals and diagonal 2-minors

    NARCIS (Netherlands)

    A. Katsampekis (Anargyros)

    2013-01-01

    htmlabstractLet $G$ be a simple graph on the vertex set ${1,\\ldots,n}$. An algebraic object attached to $G$ is the ideal $P_G$ generated by diagonal 2-minors of an $n \\times n$ matrix of variables. In this paper we first provide some general results concerning the ideal $P_G$. It is also proved that

  3. Minors and social networks: legal questions

    Directory of Open Access Journals (Sweden)

    Francisca Ramón Fernández

    2015-04-01

    Full Text Available The participation in a company increasingly technological does that numerous questions appear on the protection of the most vulnerable subjects, between them the minors. The influence of the social networks like instrument of communication is not exempt from risks for the quantity of information that is facilitated and is shared. The lack of a specific regulation that he contemplates from the point of view of the Law which is the protection that a minor must have, does that there take place situations of abandonment of the rights of the same ones.The opportunity of regulation has been left to escape in the future law of protection of the infancy, nowadays in phase of preliminary design, since it does not refer to the social networks since it had been desirable. The current procedure as for minors, as well as those of protection of information, between others, do not turn out to be sufficient to contemplate all the situations of risk that can be given in the above mentioned area. In the present work we propose to think on minors and social networks raising some legal questions, and trying to contribute some response to the problematics that appears in the juridical area.

  4. Tribune: Retention Policy for Ethnic Minority Students

    NARCIS (Netherlands)

    Herfs, Paul

    2003-01-01

    The question of the retention of ethnic minority university students in universities in the Netherlands, especially at the University of Utrecht, is examined. In particular, the cases of Surinamese, Antillian, and Aruban students, foreign refugee students, particularly medical doctors, and Turkish

  5. Effect of Bearings on Vibration in Rotating Machinery

    Science.gov (United States)

    Daniel, Rudrapati Victor; Amit Siddhappa, Savale; Bhushan Gajanan, Savale; Vipin Philip, S.; Paul, P. Sam

    2017-08-01

    In rotary machines vibration is an inherent phenomenon which has the tendency to affect required performance. Amongst the different parameters that affect vibration, selection of appropriate bearing is the most critical component. In this work the effect of different types of bearing on vibration in rotary machines is studied and the magnitude of vibration produced by use of different set of bearings under the same condition of loads and rotational speeds were investigated. Bearings considered in this work were ball bearing, tapered roller bearing, thrust bearing and shaft material considered is of mild steel. From experimental result, it was noted that tapered roller bearing gives the highest amplitude of vibration among all the three bearings whereas the ball bearing gives least amplitude under similar operating conditions.

  6. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity.

    Science.gov (United States)

    Dubois, Sara; Fraser, David

    2013-09-12

    The "pot bears" received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  7. Acoustic Emission Monitoring of Incipient in Journal Bearings - Part I : Detectability and measurement for bearing damages

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa; Kim, Kyung Woong

    1994-01-01

    In contrast to the machinery using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings

  8. INDEXING BASISDATA CITRA DENGAN METODE KUANTISASI VEKTOR MENGGUNAKAN ALGORITMA FAIR SHARE AMOUNT

    Directory of Open Access Journals (Sweden)

    Ary Mazharuddin Shidiqy

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Basisdata merupakan sesuatu yang selalu dipakai pada penyimpanan data-data baik dalam jumlah sedikit maupun banyak. Alasan penyimpanan dalam basisdata adalah keamanan data dan kemudahan dalam pencarian jika akan digunakan. Seiring berjalannya waktu, basisdata berkembang semakin kompleks. Kompleksitas tersebut dalam hal konsep maupun ragam data yang mampu disimpan di dalamnya. Jika dulu data yang dapat disimpan hanya berupa tulisan dan angka, maka sekarang basisdata tidak hanya mampu menyimpan tulisan dan angka, tapi juga gambar. Karena tidak semua data dapat dicari dengan metode yang sama, maka diperlukan metode pencarian data sesuai dengan tipe data yang dimaksud. Pada Tugas Akhir ini dikembangkan metode pencarian yang bisa diterapkan pada pencarian gambar dalam basisdata. Metodologi yang digunakan dalam pembuatan Tugas Akhir ini terdiri dari beberapa tahapan. Pertama dilakukan pembuatan codebook sebagai acuan untuk melakukan indexing basisdata. Codebook ini dihasilkan dari algoritma Fair Share Amount (FSA. Tahapan selanjutnya adalah melakukan penyimpanan data dengan menggunakan acuan codebook yang sudah dibuat. Untuk mencari gambar, dilakukan dengan memasukkan parameter pencarian berupa gambar ke aplikasi dan

  9. Nonlinear Dynamical Analysis for a Plain Bearing

    Directory of Open Access Journals (Sweden)

    Ali Belhamra

    2014-03-01

    Full Text Available This paper investigates the nonlinear dynamic behavior for a plain classic bearing (fluid bearing lubricated by a non-Newtonian fluid of a turbo machine rotating with high speed; this type of fluid contains additives viscosity (couple-stress fluid film. The solution of the nonlinear dynamic problem of this type of bearing is determined with a spatial discretisation of the modified Reynolds' equation written in dynamic mode by using the optimized short bearing theory and a temporal discretisation for equations of rotor motion by the help of Euler's explicit diagram. This study analyzes the dynamic behavior of a rotor supported by two couple-stress fluid film journal lubricant enhances the dynamic stability of the rotor-bearing system considerably compared to that obtained when using a traditional Newtonian lubricant. The analysis shows that the dynamic behavior of a shaft which turns with high velocities is strongly nonlinear even for poor eccentricities of unbalance; the presence of parameters of couple stress allows strongly attenuating the will synchrony (unbalance and asynchrony (whipping amplitudes of vibrations of the shaft which supports more severe conditions (large unbalances.

  10. Identifying lubricant options for compressor bearing designs

    Science.gov (United States)

    Karnaz, J.; Seeton, C.; Dixon, L.

    2017-08-01

    Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

  11. Predicting 21st-century polar bear habitat distribution from global climate models

    Science.gov (United States)

    Durner, G.M.; Douglas, D.C.; Nielson, R.M.; Amstrup, Steven C.; McDonald, T.L.; Stirling, I.; Mauritzen, Mette; Born, E.W.; Wiig, O.; Deweaver, E.; Serreze, Mark C.; Belikov, Stanislav; Holland, M.M.; Maslanik, J.; Aars, Jon; Bailey, D.A.; Derocher, A.E.

    2009-01-01

    Projections of polar bear (Ursus maritimus) sea ice habitat distribution in the polar basin during the 21st century were developed to understand the consequences of anticipated sea ice reductions on polar bear populations. We used location data from satellitecollared polar bears and environmental data (e.g., bathymetry, distance to coastlines, and sea ice) collected from 1985 to 1995 to build resource selection functions (RSFs). RSFs described habitats that polar bears preferred in summer, autumn, winter, and spring. When applied to independent data from 1996 to 2006, the RSFs consistently identified habitats most frequently used by polar bears. We applied the RSFs to monthly maps of 21st-century sea ice concentration projected by 10 general circulation models (GCMs) used in the Intergovernmental Panel of Climate Change Fourth Assessment Report, under the A1B greenhouse gas forcing scenario. Despite variation in their projections, all GCMs indicated habitat losses in the polar basin during the 21st century. Losses in the highest-valued RSF habitat (optimal habitat) were greatest in the southern seas of the polar basin, especially the Chukchi and Barents seas, and least along the Arctic Ocean shores of Banks Island to northern Greenland. Mean loss of optimal polar bear habitat was greatest during summer; from an observed 1.0 million km2 in 1985-1995 (baseline) to a projected multi-model mean of 0.32 million km2 in 2090-2099 (-68% change). Projected winter losses of polar bear habitat were less: from 1.7 million km2 in 1985-1995 to 1.4 million km2 in 2090-2099 (-17% change). Habitat losses based on GCM multi-model means may be conservative; simulated rates of habitat loss during 1985-2006 from many GCMs were less than the actual observed rates of loss. Although a reduction in the total amount of optimal habitat will likely reduce polar bear populations, exact relationships between habitat losses and population demographics remain unknown. Density and energetic

  12. Influence of carbon and lipid sources on variation of mercury and other trace elements in polar bears (Ursus maritimus).

    Science.gov (United States)

    Routti, Heli; Letcher, Robert J; Born, Erik W; Branigan, Marsha; Dietz, Rune; Evans, Thomas J; McKinney, Melissa A; Peacock, Elizabeth; Sonne, Christian

    2012-12-01

    In the present study, the authors investigated the influence of carbon and lipid sources on regional differences in liver trace element (As, Cd, Cu, total Hg, Mn, Pb, Rb, Se, and Zn) concentrations measured in polar bears (Ursus maritimus) (n = 121) from 10 Alaskan, Canadian Arctic, and East Greenland subpopulations. Carbon and lipid sources were assessed using δ(13) C in muscle tissue and fatty acid (FA) profiles in subcutaneous adipose tissue as chemical tracers. A negative relationship between total Hg and δ(13) C suggested that polar bears feeding in areas with higher riverine inputs of terrestrial carbon accumulate more Hg than bears feeding in areas with lower freshwater input. Mercury concentrations were also positively related to the FA 20:1n-9, which is biosynthesized in large amounts in Calanus copepods. This result raises the hypothesis that Calanus glacialis are an important link in the uptake of Hg in the marine food web and ultimately in polar bears. Unadjusted total Hg, Se, and As concentrations showed greater geographical variation among polar bear subpopulations compared with concentrations adjusted for carbon and lipid sources. The Hg concentrations adjusted for carbon and lipid sources in Bering-Chukchi Sea polar bear liver tissue remained the lowest among subpopulations. Based on these findings, the authors suggest that carbon and lipid sources for polar bears should be taken into account when one is assessing spatial and temporal trends of long-range transported trace elements. Copyright © 2012 SETAC.

  13. Comparison of fixed-bearing and mobile-bearing total knee arthroplasty after high tibial osteotomy.

    Science.gov (United States)

    Hernigou, Philippe; Huys, Maxime; Pariat, Jacques; Roubineau, François; Flouzat Lachaniette, Charles Henri; Dubory, Arnaud

    2018-02-01

    There is no information comparing the results of fixed-bearing total knee replacement and mobile-bearing total knee replacement in the same patients previously treated by high tibial osteotomy. The purpose was therefore to compare fixed-bearing and mobile-bearing total knee replacements in patients treated with previous high tibial osteotomy. We compared the results of 57 patients with osteoarthritis who had received a fixed-bearing prosthesis after high tibial osteotomy with the results of 41 matched patients who had received a rotating platform after high tibial osteotomy. The match was made for length of follow-up period. The mean follow-up was 17 years (range, 15-20 years). The patients were assessed clinically and radiographically. The pre-operative knee scores had no statistically significant differences between the two groups. So was the case with the intra-operative releases, blood loss, thromboembolic complications and infection rates in either group. There was significant improvement in both groups of knees, and no significant difference was observed between the groups (i.e., fixed-bearing and mobile-bearing knees) for the mean Knee Society knee clinical score (95 and 92 points, respectively), or the Knee Society knee functional score (82 and 83 points, respectively) at the latest follow-up. However, the mean post-operative knee motion was higher for the fixed-bearing group (117° versus 110°). In the fixed-bearing group, one knee was revised because of periprosthetic fracture. In the rotating platform mobile-bearing group, one knee was revised because of aseptic loosening of the tibial component. The Kaplan-Meier survivorship for revision at ten years of follow-up was 95.2% for the fixed bearing prosthesis and 91.1% for the rotating platform mobile-bearing prosthesis. Although we did manage to detect significant differences mainly in clinical and radiographic results between the two groups, we found no superiority or inferiority of the mobile-bearing

  14. Sextortion of Minors: Characteristics and Dynamics.

    Science.gov (United States)

    Wolak, Janis; Finkelhor, David; Walsh, Wendy; Treitman, Leah

    2018-01-01

    Sextortion (threats to expose sexual images to coerce victims to provide additional pictures, sex, or other favors) has been identified as an emerging online threat to youth, but research is scarce. We describe sextortion incidents from a large sample of victims (n = 1,385) and examine whether incidents occurring to minors (n = 572) are more or less serious than those experienced by young adults (n = 813). We ran advertising campaigns on Facebook to recruit victims of sextortion, ages 18-25, for an online survey. We use cross tabulations and logistic regression to analyze incidents that began when 18- and 19-year-old respondents were minors (ages 17 and younger) and compare them with incidents that began at ages 18-25 years. Most minor victims were female (91%) and aged 16 or 17 when incidents started (75%). Almost 60% of respondents who were minors when sextortion occurred knew perpetrators in person, often as romantic partners. Most knowingly provided images to perpetrators (75%), but also felt pressured to do so (67%). About one-third were threatened with physical assaults and menaced for >6 months. Half did not disclose incidents, and few reported to police or websites. Perpetrators against minors (vs. adults) were more likely to pressure victims into producing initial sexual images, demand additional images, threaten victims for >6 months, and urge victims to harm themselves. Sextortion incidents were serious victimizations, and often co-occurred with teen dating violence. We describe resources so that practitioners can help victims find support and legal advice and remove posted images. Copyright © 2017 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  15. Method for changing removable bearing for a wind turbine generator

    Science.gov (United States)

    Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee , Gadre; Dattatraya, Aniruddha [Rexford, NY

    2008-04-22

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  16. Transient thermal modelling of ball bearing using finite element method

    OpenAIRE

    Sibilli, Thierry; Igie, Uyioghosa

    2017-01-01

    Gas turbines are fitted with rolling element bearings, which transfer loads and supports the shafts. The interaction between the rotating and stationary parts in the bearing causes a conversion of some of the power into heat, influencing the thermal behaviour of the entire bearing chamber. To improve thermal modelling of bearing chambers, this work focused on modelling of the heat generated and dissipated around the bearings, in terms of magnitude and location, and the interaction with the co...

  17. A conventional point of view on active magnetic bearings

    Science.gov (United States)

    Chen, H. Ming; Dill, Jim

    1993-01-01

    Active magnetic bearings used in rotating machinery should be designed as locally controlled, independent devices similar to other types of bearings. The functions of control electronics and power amplifiers can be simply and explicitly related to general bearing properties such as load capacity, stiffness, and damping. The dynamics of a rotor and its supporting active magnetic bearings are analyzed in a modified conventional method with an extended state vector containing the bearing state variables.

  18. Superconducting Meissner Effect Bearings for Cryogenic Turbomachines. Phase 2

    Science.gov (United States)

    1994-02-01

    significant sources of damping being squeeze - film damping in the gap and any structural damping in the bearings . The first of these damping sources is dependent... bearing / damper , that the gas bearing could be stabilized at cryogenic temperatures. Figure 12 shows the hybrid gas/Meissner-effect bearing . The tilt-pad...Housing TurbomachineAssembly with T Meissner Dampers and Self-Acting Tilt-Pad Gas Bearings In-Une Heaters Manually Controlled Uquid Nitrogen -j T

  19. Performance studies of oil lubricated helical groove journal bearing

    OpenAIRE

    Khan, Muhammad Zubair

    1992-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. The provision of helical grooves on the surface of a plain journal bearing can improve the stability of a rotor-bearing system. However, the improvement depends on the arrangement of the grooves along the axial length of the bearing. In order to verify this improved stability three types of helical groove bearing and a reference plain journal bearing were investigated. The helical groove jour...

  20. Modeling and simulation of porous journal bearings in multibody systems

    OpenAIRE

    Buuren, Sietze van

    2013-01-01

    A specific cost-efficient type of plain journal bearing is the porous journal bearing, which possesses a pervious bush that serves as a lubricant reservoir. The current work is concerned with modeling porous journal bearings in multibody systems, for which dynamical models are needed to investigate the bearing’s behavior. Such porous journal bearing models as well as models of elementary rotor-bearing systems including these, were developed and investigated during the course for this work.

  1. Removable bearing arrangement for a wind turbine generator

    Science.gov (United States)

    Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

    2010-06-15

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  2. The impact of minority stress on mental health and substance use among sexual minority women.

    Science.gov (United States)

    Lehavot, Keren; Simoni, Jane M

    2011-04-01

    We examined the direct and indirect impact of minority stress on mental health and substance use among sexual minority women. A combination of snowball and targeted sampling strategies was used to recruit lesbian and bisexual women (N = 1,381) for a cross-sectional, online survey. Participants (M age = 33.54 years; 74% White) completed a questionnaire assessing gender expression, minority stressors (i.e., victimization, internalized homophobia, and concealment), social-psychological resources (i.e., social support, spirituality), and health-related outcomes. We used structural equation modeling to test associations among these factors, with gender expression as an antecedent and social-psychological resources as a mediator between minority stress and health. The final model demonstrated acceptable fit, χ²(79) = 414.00, p Lewis index = .91, standardized root-mean-square residual = .05, root-mean-square error of approximation = .06, accounting for significant portions of the variance in mental health problems (56%) and substance use (14%), as well as the mediator social-psychological resources (24%). Beyond indirect effects of minority stress on health outcomes, direct links emerged between victimization and substance use and between internalized homophobia and substance use. Findings indicate a significant impact of minority stressors and social-psychological resources on mental health and substance use among sexual minority women. The results improve understanding of the distinct role of various minority stressors and their mechanisms on health outcomes. Health care professionals should assess for minority stress and coping resources and refer for evidence-based psychosocial treatments. (c) 2011 APA, all rights reserved.

  3. Nonradioactive heteroduplex tracking assay for the detection of minority-variant chloroquine-resistant Plasmodium falciparum in Madagascar

    Directory of Open Access Journals (Sweden)

    Mwapasa Victor

    2009-03-01

    Full Text Available Abstract Background Strains of Plasmodium falciparum genetically resistant to chloroquine (CQ due to the presence of pfcrt 76T appear to have been recently introduced to the island of Madagascar. The prevalence of such resistant genotypes is reported to be low (P. falciparum isolates on the island. Previously, minority variant chloroquine resistant parasites were described in Malawian patients using an isotopic heteroduplex tracking assay (HTA, which can detect pfcrt 76T-bearing P. falciparum minority variants in individual patients that were undetectable by conventional PCR. However, as this assay required a radiolabeled probe, it could not be used in many resource-limited settings. Methods This study describes a digoxigenin (DIG-labeled chemiluminescent heteroduplex tracking assay (DIG-HTA to detect pfcrt 76T-bearing minority variant P. falciparum. This assay was compared to restriction fragment length polymorphism (RFLP analysis and to the isotopic HTA for detection of genetically CQ-resistant parasites in clinical samples. Results Thirty one clinical P. falciparum isolates (15 primary isolates and 16 recurrent isolates from 17 Malagasy children treated with CQ for uncomplicated malaria were genotyped for the pfcrt K76T mutation. Two (11.7% of 17 patients harboured genetically CQ-resistant P. falciparum strains after therapy as detected by HTA. RFLP analysis failed to detect any pfcrt K76T-bearing isolates. Conclusion These findings indicate that genetically CQ-resistant P. falciparum are more common than previously thought in Madagascar even though the fitness of the minority variant pfcrt 76T parasites remains unclear. In addition, HTAs for malaria drug resistance alleles are promising tools for the surveillance of anti-malarial resistance. The use of a non-radioactive label allows for the use of HTAs in malaria endemic countries.

  4. Separator Theorems for Minor-Free and Shallow Minor-Free Graphs with Applications

    DEFF Research Database (Denmark)

    Wulff-Nilsen, C.

    2011-01-01

    Alon, Seymour, and Thomas generalized Lipton and Tarjan's planar separator theorem and showed that a K(h)-minor free graph with n vertices has a separator of size at most h(3/2)root n. They gave an algorithm that, given a graph G with m edges and n vertices and given an integer h >= 1, outputs in...... the shallow minor algorithm of Plotkin, Rao, and Smith when m = Omega(n(1+is an element of)). We get a similar running time improvement for an approximation algorithm for the problem of finding a largest.. h-minor in a given graph....

  5. Nuclear operator. Liability amounts and financial security limits

    International Nuclear Information System (INIS)

    2015-07-01

    This paper gives, for numerous countries involved (or would be involved) in nuclear activities, financial information on the liability amount imposed on the operator, the amounts provided from public funds beyond the Operator's Liability Amount, to be made available by the State in whose territory the nuclear installation of the liable operator is situated, and the public funds contributed jointly by all the States parties to the BSC or CSC according to a pre-determined formula

  6. Bear bile: dilemma of traditional medicinal use and animal protection

    Directory of Open Access Journals (Sweden)

    Nagamatsu Tadashi

    2009-01-01

    Full Text Available Abstract Bear bile has been used in Traditional Chinese Medicine (TCM for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future.

  7. Bear bile: dilemma of traditional medicinal use and animal protection

    Science.gov (United States)

    Feng, Yibin; Siu, Kayu; Wang, Ning; Ng, Kwan-Ming; Tsao, Sai-Wah; Nagamatsu, Tadashi; Tong, Yao

    2009-01-01

    Bear bile has been used in Traditional Chinese Medicine (TCM) for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future. PMID:19138420

  8. Experimental investigations of active air bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar; Morosi, Stefano

    2012-01-01

    Along with traditional oil lubrication, increasing demand for high-speed applications has renewed attention to gas bearings technology. Traditional aerostatic and aerodynamic gas lubrication has been widely used in a variety of applications, ranging from high-speed spindles to micro and meso......-scale turbomachinery. The present paper deals with experimental rotordynamic testing of a flexible rotor supported by hybrid aerostaticaerodynamic gas journal bearing equipped with an electronic radial air injection system. From a rotordynamic point of view there are two phenomena that limit the widespread...... of traditional gas lubrication: 1) Low damping makes operation across critical speed dangerous, as even low level of unbalance can generate large vibration responses. This is especially problematic for gas bearing applications, which often operate in the supercritical region. Moreover, 2) An upper bound...

  9. DESIGN OPTIMIZATION OF ROTOR-BEARING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Hamit SARUHAN

    2003-03-01

    Full Text Available This paper presents a brief study of the information from the published literature and author's works regarding rotor-bearing systems analysis with respect to optimization. The main goal of this work is to motivate and give an idea to designers who are willing to deal with optimization of rotor-bearing sytems. The results obtained and presented in this study are to provide a comparison with numerical optimum design methods such as gradientbased method, and to show the potential of genetic algorithms in optimization of rotor-bearing systems. Genetic algorithms have been used as optimization problem solving techniques. They are parameter search procedures based on the idea of natural selection and genetics. These robust methods have increasingly recognized and applied in many applications.

  10. KINEMATICS FRICTION PAIR FOR EXAMPLE NEEDLE BEARINGS

    Directory of Open Access Journals (Sweden)

    Jerzy NACHIMOWICZ

    2014-06-01

    Full Text Available The present study concerns certain phenomena that take place in the needle roller bearing. The friction that generates the anti-torque of a friction pair is the major factor that influences the needle bearing’s wear. In the needle bearing there occur two predominant types of friction: the rolling friction and the sliding friction, and both are subject to examination. The study presents recordings and analysis of the movements of all needle bearing’s rolling elements. The examination was carried out on a special examination stand that precisely emulates the real conditions of the needle bearing’s work. Carefully prepared examination methods enable recording and analyzing frictions in the bearing, estimating a sphere within which the load is shifted, and calculating the coefficient of friction.

  11. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... of the work is the characterization of magnetic forces by using two experimental different experimental approaches. Such approaches are investigated and described in details. A special test rig is designed where the 4 poles - AMB is able to generate forces up to 1900 N. The high precision characterization...... of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input current and bearing...

  12. Powder metallurgy bearings for advanced rocket engines

    Science.gov (United States)

    Fleck, J. N.; Killman, B. J.; Munson, H.E.

    1985-01-01

    Traditional ingot metallurgy was pushed to the limit for many demanding applications including antifriction bearings. New systems require corrosion resistance, better fatigue resistance, and higher toughness. With conventional processing, increasing the alloying level to achieve corrosion resistance results in a decrease in other properties such as toughness. Advanced powder metallurgy affords a viable solution to this problem. During powder manufacture, the individual particle solidifies very rapidly; as a consequence, the primary carbides are very small and uniformly distributed. When properly consolidated, this uniform structure is preserved while generating a fully dense product. Element tests including rolling contact fatigue, hot hardness, wear, fracture toughness, and corrosion resistance are underway on eleven candidate P/M bearing alloys and results are compared with those for wrought 440C steel, the current SSME bearing material. Several materials which offer the promise of a significant improvement in performance were identified.

  13. Undocumented Immigration and Unemployment of U.S. Youth and Minority Workers: Econometric Evidence.

    OpenAIRE

    Winegarden, C R; Khor, Lay Boon

    1991-01-01

    The authors use Census-based data on the state distribution of the undocumented-alien population in analyzing the relationship between that population and unemployment among youth and minority workers. Regression results from their two-equation models do not support commonly expressed fears that undocumented immigration has caused any substantial increases in joblessness among these presumably vulnerable groups, although small amounts of displacement are indicated. A sizable reverse effect is...

  14. Drivers of hibernation in the brown bear.

    Science.gov (United States)

    Evans, A L; Singh, N J; Friebe, A; Arnemo, J M; Laske, T G; Fröbert, O; Swenson, J E; Blanc, S

    2016-01-01

    Hibernation has been a key area of research for several decades, essentially in small mammals in the laboratory, yet we know very little about what triggers or ends it in the wild. Do climatic factors, an internal biological clock, or physiological processes dominate? Using state-of-the-art tracking and monitoring technology on fourteen free-ranging brown bears over three winters, we recorded movement, heart rate (HR), heart rate variability (HRV), body temperature (Tb), physical activity, ambient temperature (TA), and snow depth to identify the drivers of the start and end of hibernation. We used behavioral change point analyses to estimate the start and end of hibernation and convergent cross mapping to identify the causal interactions between the ecological and physiological variables over time. To our knowledge, we have built the first chronology of both ecological and physiological events from before the start to the end of hibernation in the field. Activity, HR, and Tb started to drop slowly several weeks before den entry. Bears entered the den when snow arrived and when ambient temperature reached 0 °C. HRV, taken as a proxy of sympathetic nervous system activity, dropped dramatically once the bear entered the den. This indirectly suggests that denning is tightly coupled to metabolic suppression. During arousal, the unexpected early rise in Tb (two months before den exit) was driven by TA, but was independent of HRV. The difference between Tb and TA decreased gradually suggesting that bears were not thermoconforming. HRV increased only three weeks before exit, indicating that late activation of the sympathetic nervous system likely finalized restoration of euthermic metabolism. Interestingly, it was not until TA reached the presumed lower critical temperature, likely indicating that the bears were seeking thermoneutrality, that they exited the den. We conclude that brown bear hibernation was initiated primarily by environmental cues, but terminated by

  15. Big Bear Exploration Ltd. 1998 annual report

    International Nuclear Information System (INIS)

    1999-01-01

    During the first quarter of 1998 Big Bear completed a purchase of additional assets in the Rainbow Lake area of Alberta in which light oil purchase was financed with new equity and bank debt. The business plan was to immediately exploit these light oil assets, the result of which would be increased reserves, production and cash flow. Although drilling results in the first quarter on the Rainbow Lake properties was mixed, oil prices started to free fall and drilling costs were much higher than expected. As a result, the company completed a reduced program which resulted in less incremental loss and cash flow than it budgeted for. On April 29, 1998, Big Bear entered into agreement with Belco Oil and Gas Corp. and Moan Investments Ltd. for the issuance of convertible preferred shares at a gross value of $15,750,000, which shares were eventually converted at 70 cents per share to common equity. As a result of the continued plunge in oil prices, the lending value of the company's assets continued to fall, requiring it to take action in order to meet its financial commitments. Late in the third quarter Big Bear issued equity for proceeds of $11,032,000 which further reduced the company's debt. Although the company has been extremely active in identifying and pursuing acquisition opportunities, it became evident that Belco Oil and Gas Corp. and Big Bear did nor share common criteria for acquisitions, which resulted in the restructuring of their relationship in the fourth quarter. With the future of oil prices in question, Big Bear decided that it would change its focus to that of natural gas and would refocus ts efforts to acquire natural gas assets to fuel its growth. The purchase of Blue Range put Big Bear in a difficult position in terms of the latter's growth. In summary, what started as a difficult year ended in disappointment

  16. Measuring the Amount of Mechanical Vibration During Lathe Processing

    Directory of Open Access Journals (Sweden)

    Štefánia SALOKYOVÁ

    2015-06-01

    Full Text Available The article provides basic information regarding the measurement and evaluation of mechanical vibration during the processing of material by lathe work. The lathe processing can be characterized as removing material by precisely defined tools. The results of the experimental part are values of the vibration acceleration amplitude measured by the piezoelectric sensor on the bearing house of the lathe. A set of new knowledge and conclusions is formulated based on the analysis of the created graphical dependencies.

  17. Distribution of copper-64 in control mice and in mice bearing ascitic Krebs tumor cells

    International Nuclear Information System (INIS)

    Apelgot, S.; Coppey, J.; Grisvard, J.; Guille, E.; Sissoeeff, I.

    1981-01-01

    Three to 20 hr after an i.p. injection of 64 Cu (half-life, 12.8 hr) into mice bearing Krebs ascites cells, a high amount of the radioisotope was recovered in the ascites cells themselves. In the control group, the radioisotope was mainly present in the liver. Similar amounts of 64 Cu were recovered in regenerating as well as in normal liver, whereas in the liver of mice bearing ascites cells, this amount was lower by 40 to 50% regardless of the ascitic volume. Thus, the copper metabolism seems to be disturbed at the hepatic level in mice bearing ascites cells. The distribution of 64 Cu was 'analyzed in DNA, RNA, and proteins from cellular lysates fractionated by CsCl gradient. There was a uniform pattern of distribution in the macromolecules from ascites cells, while 64 Cu' was preferentially associated with the protein fraction from liver. Further experiments indicated that, in vivo, 64 Cu was bound to the DNA of ascites cells

  18. Wear Analysis of Wind Turbine Gearbox Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Walker, Larry R [ORNL; Xu, Hanbing [ORNL; Parten, Randy J [ORNL; Qu, Jun [ORNL; Geer, Tom [ORNL

    2010-04-01

    The objective of this effort was to investigate and characterize the nature of surface damage and wear to wind turbine gearbox bearings returned from service in the field. Bearings were supplied for examination by S. Butterfield and J. Johnson of the National Wind Technology Center (NREL), Boulder, Colorado. Studies consisted of visual examination, optical and electron microscopy, dimensional measurements of wear-induced macro-scale and micro-scale features, measurements of macro- and micro-scale hardness, 3D imaging of surface damage, studies of elemental distributions on fracture surfaces, and examinations of polished cross-sections of surfaces under various etched and non-etched conditions.

  19. The sweet lung: Chewing gummi bear aspiration.

    Science.gov (United States)

    Tavladaki, Theonimfi; Fitrolaki, Michaela-Diana; Spanaki, Anna-Maria; Ilia, Staurula; Geromarkaki, Elissabet; Briassoulis, George

    2012-07-01

    Inhalation of foreign bodies, a leading cause of accidental death, is most common in preschool children. In this article we report our experience with a 5-year-old Greek girl who presented with a 24-hour history of sore throat, chest pain, and shortness of breath. Emergency bronchoscopy was performed and multiple small chewing gummi bear (HARIBO) particles impacted in the orifices of the right main bronchus and right lobar and segmentalinic bronchi were successfully removed and aspirated. Aspiration of gummi bears, which is for the first time reported, may cause a silent choking episode leading to life-threatening bronchi obstruction at multiple sites, even in children older than 4 years.

  20. We the Minorities of CASE: A Special Survey of Minorities Working in Institutional Advancement.

    Science.gov (United States)

    Perkins, Claranne

    1984-01-01

    Council for Advancement and Support of Education minority member representatives listed in a CASE Membership Directory were surveyed. Information on job titles, job responsibilities, career preparation, professional development, salaries, factors affecting salary, and salary differences by sex was collected. (MLW)