Multifunctional Structures for High-Energy Lightweight Load-Bearing Storage

Science.gov (United States)

Loyselle, Patricia L.

2018-01-01

This is a pull-up banner of the Multifunctional Structures for High-Energy Lightweight Load-bearing Storage (M-SHELLS) technology that will be on display at the SciTech Conference in January 2018. Efforts in Multifunctional Structures for High Energy Load-Bearing Storage (M-Shells) are pushing the boundaries of development for hybrid electric propulsion for future commercial aeronautical transport. The M-Shells hybrid material would serve as the power/energy storage of the vehicle and provide structural integrity, freeing up usable volume and mass typically occupied by bulky batteries. The ultimate goal is to demonstrate a system-level mass savings with a multifunctional structure with energy storage.

Fluoroalkyl Amino Reagents (FARs: A General Approach towards the Synthesis of Heterocyclic Compounds Bearing Emergent Fluorinated Substituents

Directory of Open Access Journals (Sweden)

Bruno Commare

2017-06-01

Full Text Available Fluorinated heterocycles are important building blocks in pharmaceutical, agrochemical and material sciences. Therefore, organofluorine chemistry has witnessed high interest in the development of efficient methods for the introduction of emergent fluorinated substituents (EFS onto heterocycles. In this context, fluoroalkyl amino reagents (FARs—a class of chemicals that was slightly forgotten over the last decades—has emerged again recently and proved to be a powerful tool for the introduction of various fluorinated groups onto (heteroaromatic derivatives.

Fluoroalkyl Amino Reagents (FARs): A General Approach towards the Synthesis of Heterocyclic Compounds Bearing Emergent Fluorinated Substituents.

Science.gov (United States)

Commare, Bruno; Schmitt, Etienne; Aribi, Fallia; Panossian, Armen; Vors, Jean-Pierre; Pazenok, Sergiy; Leroux, Frédéric R

2017-06-12

Fluorinated heterocycles are important building blocks in pharmaceutical, agrochemical and material sciences. Therefore, organofluorine chemistry has witnessed high interest in the development of efficient methods for the introduction of emergent fluorinated substituents (EFS) onto heterocycles. In this context, fluoroalkyl amino reagents (FARs)-a class of chemicals that was slightly forgotten over the last decades-has emerged again recently and proved to be a powerful tool for the introduction of various fluorinated groups onto (hetero)aromatic derivatives.

Manual centrifuge system: Bearing-based hand spinner made with 3-D printer.

Science.gov (United States)

Sun-Young Yoo; Seung Jae Lee; Jong-Mo Seo

2017-07-01

Compact disk (CD) Microfluidic platforms are being studied for medical applications such as blood tests. However, its size is bulky and electricity is needed to realize centrifuge force. In this paper, bearing-based hand spinner is designed using three-dimensional printer. This spinner does not need electricity and keeps rotating direction unlike paperfuge while it is spinning. The properties of spinner vary depending on bearing type which is positioned at the center. The type of weighting area also affects change in RPM over time. When a separation experiment is implemented, separating mixture into red ink and oil and whole blood into red blood cell and plasma are achieved properly with ceramic ball bearing.

Synthesis, photophysical and photochemical properties of zinc phthalocyanines bearing fluoro-functionalized substituents

International Nuclear Information System (INIS)

Aktaş, Ayşe; Pişkin, Mehmet; Durmuş, Mahmut; Bıyıklıoğlu, Zekeriya

2014-01-01

In this study, the synthesis of phthalonitrile derivatives bearing fluoro-functionalized groups and their peripherally-tetra substituted zinc phthalocyanine complexes were reported. The phthalonitrile derivatives 2a–5a were prepared by nucleophilic substitution of 4-nitrophthalonitrile with 2-[3-(trifluoromethyl)phenoxy]ethanol, 2-{2-[3-(trifluoromethyl) phenoxy]ethoxy}ethanol, 2-(2,3,5,6-tetrafluorophenoxy)ethanol, 2-[2-(2,3,5,6-tetrafluorophenoxy)ethoxy]ethanol, respectively. Zinc phthalocyanines bearing fluoro-functionalized groups (2b–5b) were obtained from the corresponding phthalonitrile derivatives. The newly synthesized phthalocyanines displayed good solubility in organic solvents such as chloroform (CHCl 3 ), dichloromethane (DCM), tetrahydrofuran (THF), toluene, dimethylformamide (DMF) and dimethylsulfoxide (DMSO). On the other hand, the singlet oxygen, photodegradation, fluorescence quantum yields and fluorescence lifetime of these complexes were determined in DMSO. The effects of the substitution with fluoro-functionalized groups on these parameters were also compared. -- Highlights: • Synthesis of peripherally substituted zinc phthalocyanines. • Photophysical and photochemical properties in DMSO for phthalocyanines. • Photodynamic therapy studies

Synthesis, photophysical and photochemical properties of zinc phthalocyanines bearing fluoro-functionalized substituents

Energy Technology Data Exchange (ETDEWEB)

Aktaş, Ayşe [Department of Chemistry, Faculty of Sciences, Karadeniz Technical University, 61080 Trabzon (Turkey); Pişkin, Mehmet [Marmara University, Faculty of Art and Science, Department of Chemistry, 34722 Kadikoy-Istanbul (Turkey); Durmuş, Mahmut [Gebze Institute of Technology, Department of Chemistry, PO Box 141, Gebze 41400, Kocaeli (Turkey); Bıyıklıoğlu, Zekeriya, E-mail: zekeriya_61@yahoo.com [Department of Chemistry, Faculty of Sciences, Karadeniz Technical University, 61080 Trabzon (Turkey)

2014-01-15

In this study, the synthesis of phthalonitrile derivatives bearing fluoro-functionalized groups and their peripherally-tetra substituted zinc phthalocyanine complexes were reported. The phthalonitrile derivatives 2a–5a were prepared by nucleophilic substitution of 4-nitrophthalonitrile with 2-[3-(trifluoromethyl)phenoxy]ethanol, 2-{2-[3-(trifluoromethyl) phenoxy]ethoxy}ethanol, 2-(2,3,5,6-tetrafluorophenoxy)ethanol, 2-[2-(2,3,5,6-tetrafluorophenoxy)ethoxy]ethanol, respectively. Zinc phthalocyanines bearing fluoro-functionalized groups (2b–5b) were obtained from the corresponding phthalonitrile derivatives. The newly synthesized phthalocyanines displayed good solubility in organic solvents such as chloroform (CHCl{sub 3}), dichloromethane (DCM), tetrahydrofuran (THF), toluene, dimethylformamide (DMF) and dimethylsulfoxide (DMSO). On the other hand, the singlet oxygen, photodegradation, fluorescence quantum yields and fluorescence lifetime of these complexes were determined in DMSO. The effects of the substitution with fluoro-functionalized groups on these parameters were also compared. -- Highlights: • Synthesis of peripherally substituted zinc phthalocyanines. • Photophysical and photochemical properties in DMSO for phthalocyanines. • Photodynamic therapy studies.

π-face donation from the aromatic N-substituent of N-heterocyclic carbene ligands to metal and its role in catalysis

KAUST Repository

Credendino, Raffaele

2012-05-16

In this work, we calculate the redox potential in a series of Ir and Ru complexes bearing a N-heterocyclic carbene (NHC) ligand presenting different Y groups in the para position of the aromatic N-substituent. The calculated redox potentials excellently correlate with the experimental ΔE 1/2 potentials, offering a handle to rationalize the experimental findings. Analysis of the HOMO of the complexes before oxidation suggests that electron-donating Y groups destabilize the metal centered HOMO. Energy decomposition of the metal-NHC interaction indicates that electron-donating Y groups reinforce this interaction in the oxidized complexes. Analysis of the electron density in the reduced and oxidized states of representative complexes indicates a clear donation from the C ipso of the N-substituents to an empty d orbital on the metal. In case of the Ru complexes, this mechanism involves the Ru-alkylidene moiety. All of these results suggest that electron-donating Y groups render the aromatic N-substituent able to donate more density to electron-deficient metals through the C ipso atom. This conclusion suggests that electron-donating Y groups could stabilize higher oxidation states during catalysis. To test this hypothesis, we investigated the effect of differently donating Y groups in model reactions of Ru-catalyzed olefin metathesis and Pd-catalyzed C-C cross-coupling. Consistent with the experimental results, calculations indicate an easier reaction pathway if the N-substituent of the NHC ligand presents an electron-donating Y group. © 2012 American Chemical Society.

Bulky waste quantities and treatment methods in Denmark

DEFF Research Database (Denmark)

Larsen, Anna Warberg; Petersen, Claus; Christensen, Thomas Højlund

2012-01-01

were identified of which ten were recyclable and constituted 50–60% of the total quantity. The others were combustible waste for incineration (30–40%) and non-combustible waste for landfilling (10%). The largest fractions by mass were combustible waste, bricks and tile, concrete, non-combustible waste....... In addition a sorting analysis was conducted on combustible waste, which is a major fraction of bulky waste in Denmark. The generation of bulky waste was found to be 150–250 kg capita−1 year−1, and 90% of the waste was collected at recycling centres; the rest through kerbside collection. Twelve main fractions......, wood, and metal scrap, which together made up more than 90% of the total waste amounts. The amount of combustible waste could be significantly reduced through better sorting. Many of the waste fractions consisted of composite products that underwent thorough separation before being recycled...

Halogen–Metal Exchange on Bromoheterocyclics with Substituents Containing an Acidic Proton via Formation of a Magnesium Intermediate

Directory of Open Access Journals (Sweden)

Qingqiang Tian

2017-11-01

Full Text Available A selective and practical bromine–metal exchange on bromoheterocyclics bearing substituents with an acidic proton under non-cryogenic conditions was developed by a simple modification of an existing protocol. Our protocol of using a combination of i-PrMgCl and n-BuLi has not only solved the problem of intermolecular quenching that often occurred when using alkyl lithium alone as the reagent for halogen–lithium exchange, but also offered a highly selective method for performing bromo–metal exchange on dibrominated arene compounds through chelation effect.

Modelling informally collected quantities of bulky waste and reusable items in Austria

International Nuclear Information System (INIS)

Ramusch, R.; Pertl, A.; Scherhaufer, S.; Schmied, E.; Obersteiner, G.

2015-01-01

Highlights: • Informal collectors from Hungary collect bulky waste and reusable items in Austria. • Two methodologies were applied to estimate the informally collected quantities. • Both approaches lead to an estimation of roughly 100,000 t p.a. informally collected. • The formal Austrian system collects 72 kg/cap/yr of bulky waste, WEE & scrap metal. • Informal collection amounts to approx. 12 kg/cap/yr. - Abstract: Disparities in earnings between Western and Eastern European countries are the reason for a well-established informal sector actively involved in collection and transboundary shipment activities from Austria to Hungary. The preferred objects are reusable items and wastes within the categories bulky waste, WEEE and metals, intended to be sold on flea markets. Despite leading to a loss of recyclable resources for Austrian waste management, these informal activities may contribute to the extension of the lifetime of certain goods when they are reused in Hungary; nevertheless they are discussed rather controversially. The aim of this paper is to provide objective data on the quantities informally collected and transhipped. The unique activities of informal collectors required the development and implementation of a new set of methodologies. The concept of triangulation was used to verify results obtained by field visits, interviews and a traffic counting campaign. Both approaches lead to an estimation of approx. 100,000 t per year of reusable items informally collected in Austria. This means that in addition to the approx. 72 kg/cap/yr formally collected bulky waste, bulky waste wood, household scrap (excluding packaging) and WEEE, up to a further 12 kg/cap/yr might, in the case that informal collection is abandoned, end up as waste or in the second-hand sector

Modelling informally collected quantities of bulky waste and reusable items in Austria

Energy Technology Data Exchange (ETDEWEB)

Ramusch, R., E-mail: roland.ramusch@boku.ac.at; Pertl, A.; Scherhaufer, S.; Schmied, E.; Obersteiner, G.

2015-10-15

Highlights: • Informal collectors from Hungary collect bulky waste and reusable items in Austria. • Two methodologies were applied to estimate the informally collected quantities. • Both approaches lead to an estimation of roughly 100,000 t p.a. informally collected. • The formal Austrian system collects 72 kg/cap/yr of bulky waste, WEE & scrap metal. • Informal collection amounts to approx. 12 kg/cap/yr. - Abstract: Disparities in earnings between Western and Eastern European countries are the reason for a well-established informal sector actively involved in collection and transboundary shipment activities from Austria to Hungary. The preferred objects are reusable items and wastes within the categories bulky waste, WEEE and metals, intended to be sold on flea markets. Despite leading to a loss of recyclable resources for Austrian waste management, these informal activities may contribute to the extension of the lifetime of certain goods when they are reused in Hungary; nevertheless they are discussed rather controversially. The aim of this paper is to provide objective data on the quantities informally collected and transhipped. The unique activities of informal collectors required the development and implementation of a new set of methodologies. The concept of triangulation was used to verify results obtained by field visits, interviews and a traffic counting campaign. Both approaches lead to an estimation of approx. 100,000 t per year of reusable items informally collected in Austria. This means that in addition to the approx. 72 kg/cap/yr formally collected bulky waste, bulky waste wood, household scrap (excluding packaging) and WEEE, up to a further 12 kg/cap/yr might, in the case that informal collection is abandoned, end up as waste or in the second-hand sector.

Two Discrete RuCp* (Cp*=Pentamethylcyclopentadienyl) Binding Modes of N-Confused Porphyrins: Peripheral π Complex and Sitting Atop Ruthenocenophane Complex by Skeletal Transformation.

Science.gov (United States)

Yamamoto, Takaaki; Mitsuno, Koki; Mori, Shigeki; Itoyama, Shuhei; Shiota, Yoshihito; Yoshizawa, Kazunari; Ishida, Masatoshi; Furuta, Hiroyuki

2018-05-07

Complexation of a RuCp* cation with N-confused tetraarylporphyrins (NCPs) forms directly bound ruthenium(II) pentamethylcyclopentadienyl (Cp*) π-complex on a specific meso-aryl group (e.g., phenyl) neighboring peripheral imino nitrogen of NCPs in high yields. In contrast, in the case of NCPs bearing bulky meso-substituents (e.g., 3,5-di-tert-butylphenyl), new ruthenocenophane-like complex embedded on an N-confused calix[4]phyrin was formed through multiple C-H bond activation of methyl groups of Cp* ligand. The mechanistic insight into the formation of the ruthenocenophane was derived from DFT calculations. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bulky Counterions: Enhancing the Two-Photon Excited Fluorescence of Gold Nanoclusters.

Science.gov (United States)

Bertorelle, Franck; Moulin, Christophe; Soleilhac, Antonin; Comby-Zerbino, Clothilde; Dugourd, Philippe; Russier-Antoine, Isabelle; Brevet, Pierre-François; Antoine, Rodolphe

2018-01-19

Increasing fluorescence quantum yields of ligand-protected gold nanoclusters has attracted wide research interest. The strategy consisting in using bulky counterions has been found to dramatically enhance the fluorescence. In this Communication, we push forward this concept to the nonlinear optical regime. We show that by an appropriate choice of bulky counterions and of solvent, a 30-fold increase in two-photon excited fluorescence (TPEF) signal at ≈600 nm for gold nanoclusters can be obtained. This would correspond to a TPEF cross-section in the range of 0.1 to 1 GM. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

New aminoporphyrins bearing urea derivative substituents: synthesis, characterization, antibacterial and antifungal activity

Directory of Open Access Journals (Sweden)

Gholamreza Karimipour

2015-06-01

Full Text Available This work studied the synthesis of 5,10,15-tris(4-aminophenyl-20-(N,N-dialkyl/diaryl-N-phenylurea porphyrins (P1-P4 with alkyl or aryl groups of Ph, iPr, Et and Me, respectively and also the preparation of their manganese (III and cobalt (II complexes (MnP and CoP. The P1-P4 ligands were characterized by different spectroscopic techniques (1H NMR, FTIR, UV-Vis and elemental analysis, and metalated with Mn and Co acetate salts. The antibacterial and antifungal activities of these compounds in vitro were investigated by agar-disc diffusion method against Escherichia coli (-, Pseudomonas aeruginosa (-, Staphylococcus aureus(+, Bacillus subtilis (+ and Aspergillus oryzae and Candida albicans. Results showed that antibacterial and antifungal activity of the test samples increased with increase of their concentrations and the highest activity was obtained when the concentration of porphyrin compounds was 100 µg/mL. The activity for the porphyrin ligands depended on the nature of the urea derivative substituents and increased in the order P1 > P2 > P3 >P4, which was consistent with the order of their liposolubility. MnP and CoP complexes exhibited much higher antibacterial and antifungal activity than P1-P4ligands. Further, the growth inhibitory effects of these compounds was generally in the order CoP complexes > MnP complexes > P1-P4 ligands. Among these porphyrin compounds, CoP1displayed the highest antibacterial and antifungal activity, especially with a concentration of 100 µg/mL, against all the four tested bacteria and two fungi, and therefore it could be potential to be used as drug.

Synthesis of 1,3-cis-disubstituted sterically encumbered imidazolidinone organocatalysts

Directory of Open Access Journals (Sweden)

Jan Wallbaum

2017-12-01

Full Text Available A variety of novel imidazolidinone-based organocatalysts with bulky substituents were synthesized under mild reaction conditions starting from easily accessible substrates. Different natural and unnatural amino acid methyl amides were cyclized with aromatic carbaldehydes to yield two diastereomeric MacMillan-type catalysts. Special emphasis was put on bulky residues such as mesityl and pyrene moieties.

Radiation effects on polyacetylenes having substituents

International Nuclear Information System (INIS)

Higashimura, Toshinobu; Tang, Ben-Zhong; Masuda, Toshio; Yamaoka, Hitoshi; Matsuyama, Tomochika.

1985-01-01

Effects of γ-ray irradiation on high molecular weight polyacetylenes with various substituents were studied in air and in vacuum. The molecular weights of polymers from aliphatic disubstituted acetylenes (2-octyne and 2-decyne) remarkably reduced with irradiation in air. Their G values for chain scission in air were as high as 3 - 12, whereas no degradation occurred in vacuum. The degraded polymers contain carbonyl and hydroxyl groups, and are soluble in polar solvents such as methyl ethyl ketone and acetone. In contrast, polymers of aromatic disubstituted acetylenes (1-phenyl-1-propyne and 1-chloro-2-phenylacetylene) hardly degraded in air even with irradiation up to 40 Mrad. The degradation behavior of poly(t-butylacetylene) was intermediate between those of the above aliphatic and aromatic polymers. Thus the radiolysis of polyacetylenes was found to be greatly dependent on the kind of substituents. (author)

Direct observation of backbone planarization via side-chain alignment in single bulky-substituted polythiophenes

Science.gov (United States)

Raithel, Dominic; Simine, Lena; Pickel, Sebastian; Schötz, Konstantin; Panzer, Fabian; Baderschneider, Sebastian; Schiefer, Daniel; Lohwasser, Ruth; Köhler, Jürgen; Thelakkat, Mukundan; Sommer, Michael; Köhler, Anna; Rossky, Peter J.; Hildner, Richard

2018-03-01

The backbone conformation of conjugated polymers affects, to a large extent, their optical and electronic properties. The usually flexible substituents provide solubility and influence the packing behavior of conjugated polymers in films or in bad solvents. However, the role of the side chains in determining and potentially controlling the backbone conformation, and thus the optical and electronic properties on the single polymer level, is currently under debate. Here, we investigate directly the impact of the side chains by studying the bulky-substituted poly(3-(2,5-dioctylphenyl)thiophene) (PDOPT) and the common poly(3-hexylthiophene) (P3HT), both with a defined molecular weight and high regioregularity, using low-temperature single-chain photoluminescence (PL) spectroscopy and quantum-classical simulations. Surprisingly, the optical transition energy of PDOPT is significantly (˜2,000 cm‑1 or 0.25 eV) red-shifted relative to P3HT despite a higher static and dynamic disorder in the former. We ascribe this red shift to a side-chain induced backbone planarization in PDOPT, supported by temperature-dependent ensemble PL spectroscopy. Our atomistic simulations reveal that the bulkier 2,5-dioctylphenyl side chains of PDOPT adopt a clear secondary helical structural motif and thus protect conjugation, i.e., enforce backbone planarity, whereas, for P3HT, this is not the case. These different degrees of planarity in both thiophenes do not result in different conjugation lengths, which we found to be similar. It is rather the stronger electronic coupling between the repeating units in the more planar PDOPT which gives rise to the observed spectral red shift as well as to a reduced calculated electron‑hole polarization.

Substituent effects on geometric and electronic properties of iron tetraphenylporphyrin: a DFT investigation.

Science.gov (United States)

Wei, Lu; She, Yuanbin; Yu, Yanmin; Yao, Xiaoqian; Zhang, Suojiang

2012-06-01

To investigate the effects of the substituents, substituent positions and axial chloride ligand on the geometric and electronic properties of the iron tetraphenylporphyrin (FeTPP), a series of the substituented iron tetraphenylporphyrins and their chlorides, FeT(o/p-R)PP and FeT(o/p-R)PPCl (R = -H, -Cl, -NO(2), -OH, -OCH(3)), were systematically calculated without any symmetry constraint by using DFT method. For geometric structure, the substituent position and axial Cl ligand change the configuration of the iron porphyrin obviously. The ortho-substituents prefer making the phenyls perpendicular to the porphyrin ring; the axial chloride draws the central Fe ion ~0.500 Å out of the porphyrin plane toward the ligand. With regard to electronic properties, it is found that E(LUMO) could be related to the catalytic activity. The electron-withdrawing group always lowers the energies of both frontier orbitals, while the electron-donating one heightens them simultaneously, but they affect the E(HOMO) and E(LUMO) in the same sequence, -NO(2) < -Cl < -H < -OH < -OCH(3). The substituent effects on the central Fe ion were explored by calculating NBO charge distribution, spin density and natural electron configuration.

Substituent effect on redox potential of nitrido technetium complexes with Schiff base ligand. Theoretical calculations

International Nuclear Information System (INIS)

Takayama, T.; Sekine, T.; Kudo, H.

2003-01-01

Theoretical calculations based on the density functional theory (DFT) were performed to understand the effect of substituents on the molecular and electronic structures of technetium nitrido complexes with salen type Schiff base ligands. Optimized structures of these complexes are square pyramidal. The electron density on a Tc atom of the complex with electron withdrawing substituents is lower than that of the complex with electron donating substituents. The HOMO energy is lower in the complex with electron withdrawing substituents than that in the complex with electron donating substituents. The charge on Tc atoms is a good measure that reflects the redox potential of [TcN(L)] complex. (author)

Modelling informally collected quantities of bulky waste and reusable items in Austria.

Science.gov (United States)

Ramusch, R; Pertl, A; Scherhaufer, S; Schmied, E; Obersteiner, G

2015-10-01

Disparities in earnings between Western and Eastern European countries are the reason for a well-established informal sector actively involved in collection and transboundary shipment activities from Austria to Hungary. The preferred objects are reusable items and wastes within the categories bulky waste, WEEE and metals, intended to be sold on flea markets. Despite leading to a loss of recyclable resources for Austrian waste management, these informal activities may contribute to the extension of the lifetime of certain goods when they are reused in Hungary; nevertheless they are discussed rather controversially. The aim of this paper is to provide objective data on the quantities informally collected and transhipped. The unique activities of informal collectors required the development and implementation of a new set of methodologies. The concept of triangulation was used to verify results obtained by field visits, interviews and a traffic counting campaign. Both approaches lead to an estimation of approx. 100,000 t per year of reusable items informally collected in Austria. This means that in addition to the approx. 72 kg/cap/yr formally collected bulky waste, bulky waste wood, household scrap (excluding packaging) and WEEE, up to a further 12 kg/cap/yr might, in the case that informal collection is abandoned, end up as waste or in the second-hand sector. Copyright © 2015 Elsevier Ltd. All rights reserved.

Maternal diet and dioxin-like activity, bulky DNA adducts and micronuclei in mother–newborns

International Nuclear Information System (INIS)

Pedersen, Marie; Halldorsson, Thorhallur I.; Autrup, Herman; Brouwer, Abraham; Besselink, Harrie; Loft, Steffen; Knudsen, Lisbeth E.

2012-01-01

Maternal diet can contribute to carcinogenic exposures and also modify effects of environmental exposures on maternal and fetal genetic stability. In this study, associations between maternal diet and the levels of dioxin-like plasma activity, bulky DNA adducts in white blood cells and micronuclei (MN) in lymphocytes from mother to newborns were examined. From 98 pregnant women living in the greater area of Copenhagen, Denmark in 2006–2007, maternal peripheral blood and umbilical cord blood were collected, together with information on health, environmental exposure and lifestyle. Maternal diet was estimated on the basis of maternal food frequency questionnaire (FFQ) completed by the end of pregnancy. Biomarkers were detected in paired blood samples through the dioxin-responsive chemical-activated luciferase expression (CALUX) ® bioassay, 32 P-postlabelling technique and cytokinesis-block MN assay. Maternal preference for meats with dark surface were significantly associated with higher bulky DNA adducts in both maternal (β 95%CI; 0.46 (0.08, 0.84)) and cord blood (β 95%CI; 0.46 (0.05, 0.86)) before and after adjustment for potential confounders. No other significant associations between the 18 dietary variables and the biomarkers measured in maternal and fetal samples were identified. The present study suggests that maternal intake of meats with dark surface contributes to the bulky DNA adduct levels in maternal and umbilical cord blood. Relationship between food preparation and bulky DNA adducts appear to be captured by a FFQ while potential associations for other biomarkers might be more complex or need larger sample size.

Maternal diet and dioxin-like activity, bulky DNA adducts and micronuclei in mother-newborns

Energy Technology Data Exchange (ETDEWEB)

Pedersen, Marie, E-mail: mpedersen@creal.cat [Section of Environmental Health, Department of Public Health, University of Copenhagen, CSS, Oester Farimagsgade, Copenhagen K (Denmark); Halldorsson, Thorhallur I., E-mail: lur@ssi.dk [Faculty of Food Science and Nutrition, School of Health Sciences, University of Iceland Reykjavik (Iceland); Center for Fetal Programming, Department of Epidemiology, Statens Serum Institute, Copenhagen (Denmark); Autrup, Herman, E-mail: ha@mil.au.dk [School of Public Health, Department of Environmental and Occupational Medicine, Aarhus University, Aarhus (Denmark); Brouwer, Abraham, E-mail: Bram.Brouwer@bds.nl [BioDetection Systems B.V., Amsterdam (Netherlands); Besselink, Harrie, E-mail: Harrie.Besselink@bds.nl [BioDetection Systems B.V., Amsterdam (Netherlands); Loft, Steffen, E-mail: stl@sund.ku.dk [Section of Environmental Health, Department of Public Health, University of Copenhagen, CSS, Oester Farimagsgade, Copenhagen K (Denmark); Knudsen, Lisbeth E., E-mail: liek@sund.ku.dk [Section of Environmental Health, Department of Public Health, University of Copenhagen, CSS, Oester Farimagsgade, Copenhagen K (Denmark)

2012-06-01

Maternal diet can contribute to carcinogenic exposures and also modify effects of environmental exposures on maternal and fetal genetic stability. In this study, associations between maternal diet and the levels of dioxin-like plasma activity, bulky DNA adducts in white blood cells and micronuclei (MN) in lymphocytes from mother to newborns were examined. From 98 pregnant women living in the greater area of Copenhagen, Denmark in 2006-2007, maternal peripheral blood and umbilical cord blood were collected, together with information on health, environmental exposure and lifestyle. Maternal diet was estimated on the basis of maternal food frequency questionnaire (FFQ) completed by the end of pregnancy. Biomarkers were detected in paired blood samples through the dioxin-responsive chemical-activated luciferase expression (CALUX){sup Registered-Sign} bioassay, {sup 32}P-postlabelling technique and cytokinesis-block MN assay. Maternal preference for meats with dark surface were significantly associated with higher bulky DNA adducts in both maternal ({beta} 95%CI; 0.46 (0.08, 0.84)) and cord blood ({beta} 95%CI; 0.46 (0.05, 0.86)) before and after adjustment for potential confounders. No other significant associations between the 18 dietary variables and the biomarkers measured in maternal and fetal samples were identified. The present study suggests that maternal intake of meats with dark surface contributes to the bulky DNA adduct levels in maternal and umbilical cord blood. Relationship between food preparation and bulky DNA adducts appear to be captured by a FFQ while potential associations for other biomarkers might be more complex or need larger sample size.

Completely non-destructive elemental analysis of bulky samples by PGA

International Nuclear Information System (INIS)

Oura, Y.; Nakahara, H.; Sueki, K.; Sato, W.; Tomizawa, T.

1998-01-01

A new non-destructive method is proposed for the elemental analysis of bulk samples. It is essentially a combination of PGA and NAA by a single neutron irradiation, and allows determinations of elemental contents of both major and minor constituents relative to that of some reference element. Major elements and some trace elements such as B, Sm, and Gd are mostly determined by the measurement of prompt gamma rays emitted when a bulky sample in its original form, namely, without any reduction of the sample size, is placed in the beam of neutrons guided from a nuclear reactor. Minor elements are then determined by the off-line measurements of gamma rays emitted from the radioactive nuclides produced within the sample by neutron capture reactions. As the radioactivity remaining in the sample becomes negligibly small after a few weeks cooling, the proposed method will be most usefully applied for the elemental analysis of bulky precious samples such as archaeological samples, and arts and crafts. In this presentation, applicability of the method will be demonstrated for porcelain and bronze samples. (author)

Substituent distribution within cross-linked and hydroxypropylated sweet potato starch and potato starch

NARCIS (Netherlands)

Zhao, J.; Schols, H.A.; Chen Zenghong,; Jin Zhengyu,; Buwalda, P.L.; Gruppen, H.

2012-01-01

Revealing the substituents distribution within starch can help to understand the changes of starch properties after modification. The distribution of substituents over cross-linked and hydroxypropylated sweet potato starch was investigated and compared with modified potato starch. The starches were

Exposure to meat-derived carcinogens and bulky DNA adduct levels in normal-appearing colon mucosa.

Science.gov (United States)

Ho, Vikki; Brunetti, Vanessa; Peacock, Sarah; Massey, Thomas E; Godschalk, Roger W L; van Schooten, Frederik J; Ashbury, Janet E; Vanner, Stephen J; King, Will D

2017-09-01

Meat consumption is a risk factor for colorectal cancer. This research investigated the relationship between meat-derived carcinogen exposure and bulky DNA adduct levels, a biomarker of DNA damage, in colon mucosa. Least squares regression was used to examine the relationship between meat-derived carcinogen exposure (PhIP and meat mutagenicity) and bulky DNA adduct levels in normal-appearing colon tissue measured using 32 P-postlabelling among 202 patients undergoing a screening colonoscopy. Gene-diet interactions between carcinogen exposure and genetic factors relevant to biotransformation and DNA repair were also examined. Genotyping was conducting using the MassARRAY ® iPLEX ® Gold SNP Genotyping assay. PhIP and higher meat mutagenicity exposures were not associated with levels of bulky DNA adducts in colon mucosa. The XPC polymorphism (rs2228001) was found to associate with bulky DNA adduct levels, whereby genotypes conferring lower DNA repair activity were associated with higher DNA adduct levels than the normal activity genotype. Among individuals with genotypes associated with lower DNA repair (XPD, rs13181 and rs1799179) or detoxification activity (GSTP1, rs1695), higher PhIP or meat mutagenicity exposures were associated with higher DNA adduct levels. Significant interactions between the XPC polymorphism (rs2228000) and both dietary PhIP and meat mutagenicity on DNA adduct levels was observed, but associations were inconsistent with the a priori hypothesized direction of effect. Exposure to meat-derived carcinogens may be associated with increased DNA damage occurring directly in the colon among genetically susceptible individuals. Copyright © 2017 Elsevier B.V. All rights reserved.

The electrochemical signature of functionalized single-walled carbon nanotubes bearing electroactive groups

International Nuclear Information System (INIS)

Le Floch, Fabien; Thuaire, Aurelie; Simonato, Jean-Pierre; Bidan, Gerard

2009-01-01

We report the modification and characterization of single-walled carbon nanotubes (SWCNTs) in view of molecular sensing applications. We found that ultrasonicated SWCNTs present sticking properties that make them adhere on electrode surfaces. This allows excellent characterization of SWCNTs by cyclic voltammetry (CV) before and after chemical functionalization with diazonium salts bearing electroactive groups. Bare SWCNTs presented distinct invariant shapes in CV, used as control curves, in comparison with functionalized SWCNTs for which specific signatures corresponding to the presence of grafted molecules were identified. According to the electronic substituents in the para position of the diazonium salts, divergent behaviours were observed for the grafting reactions. Diazonium salts having electrowithdrawing groups could be grafted without electrochemical induction whereas those bearing electron donating groups required a cathodic potential to generate the formation of the radical species.

The electrochemical signature of functionalized single-walled carbon nanotubes bearing electroactive groups

Energy Technology Data Exchange (ETDEWEB)

Le Floch, Fabien; Thuaire, Aurelie; Simonato, Jean-Pierre [LITEN/DTNM/LCRE, CEA-Grenoble 17 rue des Martyrs, 38054 Grenoble cedex 9 (France); Bidan, Gerard [INAC/DIR, CEA-Grenoble 17 rue des Martyrs, 38054 Grenoble cedex 9 (France)], E-mail: jean-pierre.simonato@cea.fr

2009-04-08

We report the modification and characterization of single-walled carbon nanotubes (SWCNTs) in view of molecular sensing applications. We found that ultrasonicated SWCNTs present sticking properties that make them adhere on electrode surfaces. This allows excellent characterization of SWCNTs by cyclic voltammetry (CV) before and after chemical functionalization with diazonium salts bearing electroactive groups. Bare SWCNTs presented distinct invariant shapes in CV, used as control curves, in comparison with functionalized SWCNTs for which specific signatures corresponding to the presence of grafted molecules were identified. According to the electronic substituents in the para position of the diazonium salts, divergent behaviours were observed for the grafting reactions. Diazonium salts having electrowithdrawing groups could be grafted without electrochemical induction whereas those bearing electron donating groups required a cathodic potential to generate the formation of the radical species.

Photostability enhancement of the pentacene derivative having two nitronyl nitroxide radical substituents.

Science.gov (United States)

Shimizu, Akihiro; Ito, Akitaka; Teki, Yoshio

2016-02-18

Pentacene derivatives possessing nitronyl nitroxide radical substituents (1a and 1b) were synthesized, and their photochemical properties were evaluated. 1a with two radical substituents showed a remarkable enhancement of photostability compared with pentacene, 6,13-bis(triisopropylsilylethynyl)pentacene and the monoradical, 1b. This is understood due to the presence of the multiple deactivation pathways in the photoexcited states.

Irreversible blockade of the high and low affinity (3H) naloxone binding sites by C-6 derivatives of morphinane-6-ones

International Nuclear Information System (INIS)

Krizsan, D.; Varga, E.; Benyhe, S.; Szucs, M.; Borsodi, A.; Hosztafi, S.

1991-01-01

C-6 derivatives-hydrazones, phenylhydrazones, dinitrophenylhydrazones, oximes and semicarbazones - of morphinane-6-ones were synthesized and their binding characteristics were studied on rat brain membranes. The dihydromorphinone and oxymorphone derivatives compete for the ( 3 H)naloxone binding sites with high affinity, while the dihydrocodeinone and oxycodone derivatives are less potent. The affinity of the new compounds is decreased for the delta sites as compared to the parent ligands. The ligands bearing bulky substituents also bind with low affinity to the kappa sites. The modification decreased the Na + -index of compounds indicating their mixed agonist-antagonist character. The dihydromorphinone derivatives are all capable to block irreversibly the high affinity binding site of ( 3 H)naloxone, whereas the dihydrocodeinone derivatives block irreversibly the low affinity site. A possible mechanism for the inhibition is suggested

General and efficient one-pot synthesis of novel sugar/heterocyclic(aryl) 1,2-diketones from sugar terminal alkynes by Sonogashira/tetra-n- butylammonium permanganate oxidation.

Science.gov (United States)

Zhang, Fuyi; Wu, Xiaopei; Wang, Liming; Liu, Hong; Zhao, Yufen

2015-11-19

A new approach for one-pot synthesis of novel sugar/heterocyclic(aryl) 1,2-diketones has been achieved by the reaction of various sugar terminal alkynes with heterocyclic(aryl) iodides at room temperature. This one-pot protocol includes Sonogashira coupling and mild n-Bu4NMnO4 oxidation reaction. This method is mild, general and efficient. Fifty-six examples have been given and the sugar/heterocyclic(aryl) 1,2-diketones were obtained in 71-94% yields. The sugar terminal alkynes include 9 structurally different sugars in pyranose, furanose, and acyclic form which have various protecting groups, sensitive groups, and sterically bulky substituents. The heterocyclic(aryl) iodides include sterically bulky heterocyclic compounds and iodobenzenes with electron-donating, electron-neutral, and electron-withdrawing substituents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of the Substituents of Boron Atoms on Conjugated Polymers Containing B←N Units.

Science.gov (United States)

Liu, Jun; Wang, Tao; Dou, Chuandong; Wang, Lixiang

2018-06-15

Organoboron chemistry is a new tool to tune the electronic structures and properties of conjugated polymers, which are important for applications in organic opto-electronic devices. To investigate the effects of substituents of boron atoms on conjugated polymers, we synthesized three conjugated polymers based on double B←N bridged bipyridine (BNBP) with various substituents on the boron atoms. By changing the substituents from four phenyl groups and two phenyl groups/two fluorine atoms to four fluorine atoms, the BNBP-based polymers show the blue-shifted absorption spectra, decreased LUMO/HOMO energy levels and enhanced electron affinities, as well as the increased electron mobilities. Moreover, these BNBP-based polymers can be used as electron acceptors for all-polymer solar cells. These results demonstrate that the substituents of boron atoms can effectively modulate the electronic properties and applications of conjugated polymers. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Photomechanical Deformation of Azobenzene-Functionalized Polyimides Synthesized with Bulky Substituents (Postprint)

Science.gov (United States)

2017-12-06

comparative UV − vis result (Figure S6, Supporting Information) that azoCBODA-BPADA has the lowest absorbance change for its azobenzene trans−cis...or trans−cis−trans reorientation processes upon irradiation of 365 nm UV or blue-green light (440−530 nm), respectively. Exposure of these materials...to UV light induces a trans−cis isomerization, resulting in a length reduction of the molecular axis of azobenzene from 9 Å (trans) to 5.5 Å (cis).10

Indolylarylsulfones as HIV-1 non-nucleoside reverse transcriptase inhibitors: new cyclic substituents at indole-2-carboxamide.

Science.gov (United States)

La Regina, Giuseppe; Coluccia, Antonio; Brancale, Andrea; Piscitelli, Francesco; Gatti, Valerio; Maga, Giovanni; Samuele, Alberta; Pannecouque, Christophe; Schols, Dominique; Balzarini, Jan; Novellino, Ettore; Silvestri, Romano

2011-03-24

New indolylarylsulfone derivatives bearing cyclic substituents at indole-2-carboxamide linked through a methylene/ethylene spacer were potent inhibitors of the WT HIV-1 replication in CEM and PBMC cells with inhibitory concentrations in the low nanomolar range. Against the mutant L100I and K103N RT HIV-1 strains in MT-4 cells, compounds 20, 24-26, 36, and 40 showed antiviral potency superior to that of NVP and EFV. Against these mutant strains, derivatives 20, 24-26, and 40 were equipotent to ETV. Molecular docking experiments on this novel series of IAS analogues have also suggested that the H-bond interaction between the nitrogen atom in the carboxamide chain of IAS and Glu138:B is important in the binding of these compounds. These results are in accordance with the experimental data obtained on the WT and on the mutant HIV-1 strains tested.

Effect of substituents on polarizability and hyperpolarizability values of benzimidazole metal complexes

Energy Technology Data Exchange (ETDEWEB)

Praveen, P. A.; Babu, R. Ramesh, E-mail: rampap2k@yahoo.co.in [Crystal Growth and Thin films Laboratory, Department of Physics, Bharathidasan University, Tiruchirappalli - 620 024, Tamilnadu (India)

2016-05-23

In this report, the polarizability and first and second order hyperpolarizability values of bis benzimidazole Zn(II)-2R and bis benzimidazole Cd(II)-2R complexes, with different electron donating moieties R (R= Cl, Br, I, Acetate) were calculated using time dependent Hartree-Fock (TDHF) formalism embedded in MOPAC2012 package. Further the role of substituents on polarizability and hyperpolarizability values is investigated for the first time by analyzing the frontier molecular orbitals of the complexes with respect to the electronegativity of the substituents. It is found that the increase in electronegativity of the substituents correspondingly increases the energy gap of the molecules, which in turn reduces the polarizability values of both Zn and Cd benzimidazole complexes. Similarly, increase in electronegativity reduces the electric quadrupole moments of both the metal complexes, which in turn reduces the hyperpolarizability values.

Directing the breathing behavior of pillared-layered metal-organic frameworks via a systematic library of functionalized linkers bearing flexible substituents.

Science.gov (United States)

Henke, Sebastian; Schneemann, Andreas; Wütscher, Annika; Fischer, Roland A

2012-06-06

Flexible metal-organic frameworks (MOFs), also referred to as soft porous crystals (SPCs), show reversible structural transitions dependent on the nature and quantity of adsorbed guest molecules. In recent studies it has been reported that covalent functionalization of the organic linker can influence or even integrate framework flexibility ("breathing") in MOFs. However, rational fine-tuning of such responsive properties is very desirable but challenging as well. Here we present a powerful approach for the targeted manipulation of responsiveness and framework flexibility of an important family of pillared-layered MOFs based on the parent structure [Zn(2)(bdc)(2)(dabco)](n) (bdc = 1,4-benzenedicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane). A library of functionalized bdc-type linkers (fu-bdc), which bear additional dangling side groups at different positions of the benzene core (alkoxy groups of varying chain length with diverse functionalities and polarity), was generated. Synthesis of the materials [Zn(2)(fu-bdc)(2)(dabco)](n) yields the respective collection of highly responsive MOFs. The parent MOF is only weakly flexible; however, the substituted frameworks of [Zn(2)(fu-bdc)(2)(dabco)](n) contract drastically upon guest removal and expand again upon adsorption of DMF (N,N-dimethylformamide), EtOH, or CO(2), etc., while N(2) is hardly adsorbed and does not open the narrow-pored form. These "breathing" dynamics are attributed to the dangling side chains that act as immobilized "guests", which interact with mobile guest molecules as well as with themselves and with the framework backbone. The structural details of the guest-free, contracted form and the gas sorption behavior (phase transition pressure, hysteresis loop) are highly dependent on the nature of the substituent at the linker and can therefore be adjusted using our approach. Combining our library of functionalized linkers with the concept of mixed-component MOFs (solid solutions) offers very rich

Effect of substituent structure on pyrimidine electrophilic substitution

CSIR Research Space (South Africa)

Van der Westhuyzen, CW

2007-01-01

Full Text Available In an investigation into the electrophilic nitrosation reactions of a series of 4,6-disubstituted pyrimidine derivatives, a subtle interplay between the electronic nature of the C-4 and C-6 substituents and reactivity was found where these were...

Organic Semiconductors and Conductors with tert-Butyl Substituents

Directory of Open Access Journals (Sweden)

Toshiki Higashino

2012-08-01

Full Text Available Tetrathiafulvalene (TTF, pentacene, and quarterthiophene with tert-butyl substituents are synthesized, and the crystal structures and the transistor properties are investigated. The tetracyanoquinodimethane (TCNQ complex of tert-butyl TTF constructs highly one-dimensional segregated columns with tetragonal crystal symmetry.

Phase II study of concomitant chemoradiotherapy in bulky refractory or chemoresistant relapsed lymphomas

International Nuclear Information System (INIS)

Girinsky, Theodore; Lapusan, Simona; Ribrag, Vincent; Koscielny, Serge; Ferme, Christophe; Carde, Patrice

2005-01-01

Purpose: To evaluate the local efficacy of concomitant chemoradiotherapy in patients with mostly refractory lymphoma. Methods and materials: Patients with refractory or chemoresistant-relapsed lymphoma and bulky life-threatening masses were included in this study. A split course of concomitant radiotherapy and chemotherapy (mostly cisplatin and etoposide) was delivered during a 6-week period. Weekly blood tests and a clinical examination using the Radiation Therapy Oncology Group guidelines were performed to assess acute toxicity. The tumor response was evaluated 1-3 months after treatment and at regular follow-up visits. Results: We enrolled 21 patients in the study between January 1998 and April 2003. Of the 21 patients, 60% had disseminated disease with bulky tumor masses and 85% had refractory lymphoma, of which most had been treated with at least two different chemotherapy regimens before concomitant chemoradiotherapy. Seventy-five percent received regimens containing cisplatinum and etoposide. The median radiation dose was 40 Gy (range, 12-62.5 Gy). Grade 3-4 hematologic toxicity and mucositis was observed in 70% and 30% of cases respectively, without any deaths. The overall response and complete remission rate was 70% and 20%, respectively. The 1-year overall survival and local progression-free survival rate was 20.4% and 54%, respectively. Three patients with localized disease were still alive 16, 33, and 48 months after treatment. Conclusion: Concomitant chemoradiotherapy for refractory or chemoresistant-relapsed lymphoma induced high hematologic toxicity, but seemed adequate for controlling local bulky tumor masses. No toxicity-related death was observed

The investigation of substituent effects on the fragmentation pathways of pentacoordinated phenoxyspirophosphoranes by ESI-MSn.

Science.gov (United States)

Cui, Xiaoyan; Sun, Can; Zhao, Pei; Wang, Yanyan; Guo, Yanchun; Zhao, Yufen; Cao, Shuxia

2018-04-01

The fragmentation pathways of pentacoordinated phenoxyspirophosphoranes were investigated in the positive mode by electrospray ionization multistage mass spectrometry. The results demonstrate that the sodium adducts of the title compounds undergo two competitive fragmentation pathways, and the fragmentation patterns are heavily dependent on the various substituent patterns at the phenolic group. An electron-withdrawing substituent at the ortho-position always results in the removal of a corresponding phenol analogue, while cleavage by spiroring opening becomes the predominant fragmentation pathway if an electron-donating substituent is at the phenolic group. The substituent effects on the competitive fragmentation pathways were further elucidated by theoretical calculations, single crystal structure analysis, and high-resolution mass spectrometry. The results contribute to the understanding of the gas-phase fragmentation reactions and the structure identification of spirophosphorane analogues by electrospray ionization multistage mass spectrometry. Copyright © 2018 John Wiley & Sons, Ltd.

Parametric normalization for full-energy peak efficiency of HPGe γ-ray spectrometers at different counting positions for bulky sources.

Science.gov (United States)

Peng, Nie; Bang-Fa, Ni; Wei-Zhi, Tian

2013-02-01

Application of effective interaction depth (EID) principle for parametric normalization of full energy peak efficiencies at different counting positions, originally for quasi-point sources, has been extended to bulky sources (within ∅30 mm×40 mm) with arbitrary matrices. It is also proved that the EID function for quasi-point source can be directly used for cylindrical bulky sources (within ∅30 mm×40 mm) with the geometric center as effective point source for low atomic number (Z) and low density (D) media and high energy γ-rays. It is also found that in general EID for bulky sources is dependent upon Z and D of the medium and the energy of the γ-rays in question. In addition, the EID principle was theoretically verified by MCNP calculations. Copyright © 2012 Elsevier Ltd. All rights reserved.

Rational design of intrinsically ultramicroporous polyimides containing bridgehead-substituted triptycene for highly selective and permeable gas separation membranes

KAUST Repository

Swaidan, Raja

2014-08-12

Highly ultramicroporous, solution-processable polyimides bearing 9,10-bridgehead-substituted triptycene demonstrated the highest BET surface area reported for polyimides (840 m2 g-1) and several new highs in gas selectivity and permeability for hydrogen (1630-3980 barrers, H2/CH4 ∼ 38) and air (230-630 barrers, O 2/N2 = 5.5-5.9) separations. Two new dianhydrides bearing 9,10-diethyl- and 9,10-dipropyltriptycenes indicate that the ultramicroporosity is optimized for fast polymeric sieving with the use of short, bulky isopropyl bridgeheads and methyl-substituted diamines (TrMPD, TMPD, and TMBZ) that increase intrachain rigidity. Mechanically, the triptycene-based analogue of a spirobisindane-based polyimide exhibited 50% increases in both tensile strength at break (94 MPa) and elastic modulus (2460 MPa) with corresponding 90% lower elongations at break (6%) likely due to the ability of highly entangled spiro-based chains to unwind. To guide future polyimide design, structure/property relationships are suggested between the geometry of the contortion center, the diamine and bridgehead substituent, and the mechanical, microstructural, and gas transport properties. © 2014 American Chemical Society.

Rational design of intrinsically ultramicroporous polyimides containing bridgehead-substituted triptycene for highly selective and permeable gas separation membranes

KAUST Repository

Swaidan, Raja; Al-Saeedi, Majed; Ghanem, Bader; Litwiller, Eric; Pinnau, Ingo

2014-01-01

Highly ultramicroporous, solution-processable polyimides bearing 9,10-bridgehead-substituted triptycene demonstrated the highest BET surface area reported for polyimides (840 m2 g-1) and several new highs in gas selectivity and permeability for hydrogen (1630-3980 barrers, H2/CH4 ∼ 38) and air (230-630 barrers, O 2/N2 = 5.5-5.9) separations. Two new dianhydrides bearing 9,10-diethyl- and 9,10-dipropyltriptycenes indicate that the ultramicroporosity is optimized for fast polymeric sieving with the use of short, bulky isopropyl bridgeheads and methyl-substituted diamines (TrMPD, TMPD, and TMBZ) that increase intrachain rigidity. Mechanically, the triptycene-based analogue of a spirobisindane-based polyimide exhibited 50% increases in both tensile strength at break (94 MPa) and elastic modulus (2460 MPa) with corresponding 90% lower elongations at break (6%) likely due to the ability of highly entangled spiro-based chains to unwind. To guide future polyimide design, structure/property relationships are suggested between the geometry of the contortion center, the diamine and bridgehead substituent, and the mechanical, microstructural, and gas transport properties. © 2014 American Chemical Society.

Ball Bearings Equipped for In Situ Lubrication on Demand

Science.gov (United States)

Marchetti, Mario; Jones, William R., Jr.; Pepper, Stephen V.; Jansen, Mark; Predmore, Roamer

2005-01-01

In situ systems that provide fresh lubricants to ball/race contacts on demand have been developed to prolong the operational lives of ball bearings. These systems were originally intended to be incorporated into ball bearings in mechanisms that are required to operate in outer space for years, in conditions in which lubricants tend to deteriorate and/or evaporate. These systems may also be useful for similarly prolonging bearing lifetimes on Earth. Reservoirs have been among the means used previously to resupply lubricants. Lubricant- resupply reservoirs are bulky and add complexity to bearing assemblies. In addition, such a reservoir cannot be turned on or off as needed: it supplies lubricant continuously, often leading to an excess of lubricant in the bearing. A lubricator of the present type includes a porous ring cartridge attached to the inner or the outer ring of a ball bearing (see Figure 1). Oil is stored in the porous cartridge and is released by heating the cartridge: Because the thermal expansion of the oil exceeds that of the cartridge, heating causes the ejection of some oil. A metal film can be deposited on a face of the cartridge to serve as an electrical-resistance heater. The heater can be activated in response to a measured increase in torque that signals depletion of oil from the bearing/race contacts. Because the oil has low surface tension and readily wets the bearing-ring material, it spreads over the bearing ring and eventually reaches the ball/race contacts. The Marangoni effect (a surface-tension gradient associated with a temperature gradient) is utilized to enhance the desired transfer of lubricant to the ball/race contacts during heating. For a test, a ball bearing designed for use at low speed was assembled without lubricant and equipped with a porous-ring lubricator, the resistance heater of which consumed a power of less than 1 W when triggered on by a torque-measuring device. In the test, a load of 20 lb (.89 N) was applied and the

Fulltext PDF

Indian Academy of Sciences (India)

... in all respects to the minor by-product from crude petroleum. ... from its endo form to the exo isomer, using aluminium chloride as the catalyst (Figure 2). ... of protecting a reactive species by providing bulky substituents at suitable locations.

Improved syntheses of high hole mobility phthalocyanines: A case of steric assistance in the cyclo-oligomerisation of phthalonitriles

Directory of Open Access Journals (Sweden)

Daniel J. Tate

2012-01-01

Full Text Available It has been shown that the base-initiated cyclo-oligomerisation of phthalonitriles is favoured by bulky α-substituents making it possible to obtain the metal-free phthalocyanine directly and in high yield. The phthalocyanine with eight α-isoheptyl substituents gives a high time-of-flight hole mobility of 0.14 cm2·V−1·s−1 within the temperature range of the columnar hexagonal phase, that is 169–189 °C.

Monitoring lipase-catalyzed interesterification for bulky fats modification with FT-IR/NIR spectroscopy

DEFF Research Database (Denmark)

Chang, Tinghong; Lai, Xuxin; Zhang, Hong

2005-01-01

This work demonstrates the application of FT-IR and FT-NIR spectroscopy to monitor the enzymatic interesterification process for bulky fat modification. The reaction was conducted between palm stearin and coconut oil (70/30, w/w) with the catalysis of Lipozyme TL IM at 70°C in a batch reactor...

Bulky DNA adducts in white blood cells: a pooled analysis of 3,600 subjects.

NARCIS (Netherlands)

Ricceri, F.; Godschalk, R.W.; Peluso, M.; Phillips, D.H.; Agudo, A; Georgiadis, P.; Loft, S.; Tjonneland, A.; Raaschou-Nielsen, O.; Palli, D.; Perera, F.; Vermeulen, R.; Taioli, E.; Sram, R.J.; Munnia, A.; Rosa, F.; Allione, A.; Matullo, G.; Vineis, P.

2010-01-01

BACKGROUND: Bulky DNA adducts are markers of exposure to genotoxic aromatic compounds, which reflect the ability of an individual to metabolically activate carcinogens and to repair DNA damage. Polycyclic aromatic hydrocarbons (PAHs) represent a major class of carcinogens that are capable of forming

Partial stereotactic ablative boost radiotherapy in bulky non-small cell lung cancer: a retrospective study

Directory of Open Access Journals (Sweden)

Bai Y

2018-05-01

Full Text Available Yun Bai,1 Xian-shu Gao,1 Shang-bin Qin,1 Jia-yan Chen,1 Meng-meng Su,1 Qing Liu,2 Xiu-bo Qin,2 Ming-wei Ma,1 Bo Zhao,1 Xiao-bin Gu,1 Mu Xie,1 Ming Cui,1 Xin Qi,1 Xiao-ying Li1 1Department of Radiation Oncology, Peking University First Hospital, Beijing, China; 2Department of Medical Imaging, Peking University First Hospital, Beijing, China Purpose: Bulky non-small cell lung cancer (NSCLC is difficult to achieve effective local control by conventionally fractionated radiotherapy (CRT. The present work aims to evaluate the safety and efficacy of partial stereotactic ablative boost radiotherapy (P-SABR in bulky NSCLC. Patients and methods: From December 2012 through August 2017, 30 patients with bulky NSCLC treated with P-SABR technique were analyzed. The P-SABR plan consisted of one partial SABR plan (5–9 Gy/f, 3–6 fractions to gross tumor boost (GTVb, followed by one CRT plan to the planning target volume (PTV. GTVb was the max volume receiving SABR to guarantee the dose of organs-at-risks (OARs falloff to about 3 Gy/f. The total dose of PTV margin was planned to above 60 Gy. The simply CRT plans were created using the same planning parameters as the original plan, with the goal to achieve comparable OARs doses and PTV margin dose to the P-SABR plan. Dosimetric variables were acquired in both P-SABR and compared CRT plans. Toxicity, local control, and survival were also evaluated. Results: Median follow-up in survivors was 10.3 months (range=2.3–39.4 months. Eleven patients (36.7% had partial response (PR and ten patients (33.3% had stable disease (SD. Two-year overall survival was 55.6%. Two-year local control rate was 85.7%. No severe acute side effects .CTCAE Grade III were observed. Compared to the simply CRT plan, P-SABR plans achieved similar doses to the OARs and Dmin, but increased dose at the isocenter, Dmean, Dmax, and biological equivalent dose (BED significantly (P<0.05. BED in the tumor center could reach 107.3 Gy (93.2–132

Theoretical investigation of substituent effects on the dihydroazulene/vinylheptafulvene photoswitch

DEFF Research Database (Denmark)

Hansen, Mia Harring; Elm, Jonas; Olsen, Stine Tetzschner

2016-01-01

We have investigated the effects of substituents on the properties of the dihydroazulene/vinylheptafulvene photoswitch. The focus is on the changes of the thermochemical properties by placing electron withdrawing and donating groups on the monocyano and dicyano structures of the parent dihydroazu......We have investigated the effects of substituents on the properties of the dihydroazulene/vinylheptafulvene photoswitch. The focus is on the changes of the thermochemical properties by placing electron withdrawing and donating groups on the monocyano and dicyano structures of the parent...... on the substitution pattern, and based on these results, we have outlined molecular design considerations for obtaining new desired target structures exhibiting long energy storage times. Selected candidate systems have also been investigated in terms of optical properties to elucidate how sensitive the absorption...

Loss of heterozygosity and copy number alterations in flow-sorted bulky cervical cancer.

Directory of Open Access Journals (Sweden)

Sabrina A H M van den Tillaart

Full Text Available Treatment choices for cervical cancer are primarily based on clinical FIGO stage and the post-operative evaluation of prognostic parameters including tumor diameter, parametrial and lymph node involvement, vaso-invasion, infiltration depth, and histological type. The aim of this study was to evaluate genomic changes in bulky cervical tumors and their relation to clinical parameters, using single nucleotide polymorphism (SNP-analysis. Flow-sorted tumor cells and patient-matched normal cells were extracted from 81 bulky cervical tumors. DNA-index (DI measurement and whole genome SNP-analysis were performed. Data were analyzed to detect copy number alterations (CNA and allelic balance state: balanced, imbalanced or pure LOH, and their relation to clinical parameters. The DI varied from 0.92-2.56. Pure LOH was found in ≥40% of samples on chromosome-arms 3p, 4p, 6p, 6q, and 11q, CN gains in >20% on 1q, 3q, 5p, 8q, and 20q, and losses on 2q, 3p, 4p, 11q, and 13q. Over 40% showed gain on 3q. The only significant differences were found between histological types (squamous, adeno and adenosquamous in the lesser allele intensity ratio (LAIR (p = 0.035 and in the CNA analysis (p = 0.011. More losses were found on chromosome-arm 2q (FDR = 0.004 in squamous tumors and more gains on 7p, 7q, and 9p in adenosquamous tumors (FDR = 0.006, FDR = 0.004, and FDR = 0.029. Whole genome analysis of bulky cervical cancer shows widespread changes in allelic balance and CN. The overall genetic changes and CNA on specific chromosome-arms differed between histological types. No relation was found with the clinical parameters that currently dictate treatment choice.

Effects of p-substituents on electrochemical CO oxidation by Rh porphyrin-based catalysts.

Science.gov (United States)

Yamazaki, Shin-ichi; Yamada, Yusuke; Takeda, Sahori; Goto, Midori; Ioroi, Tsutomu; Siroma, Zyun; Yasuda, Kazuaki

2010-08-21

Electrochemical CO oxidation by several carbon-supported rhodium tetraphenylporphyrins with systematically varied meso-substituents was investigated. A quantitative analysis revealed that the p-substituents on the meso-phenyl groups significantly affected CO oxidation activity. The electrocatalytic reaction was characterized in detail based on the spectroscopic and X-ray structural results as well as electrochemical analyses. The difference in the activity among Rh porphyrins is discussed in terms of the properties of p-substituents along with a proposed reaction mechanism. Rhodium tetrakis(4-carboxyphenyl)porphyrin (Rh(TCPP)), which exhibited the highest activity among the porphyrins tested, oxidized CO at a high rate at much lower potentials (means that CO is electrochemically oxidized by this catalyst when a slight overpotential is applied during the operation of a proton exchange membrane fuel cell. This catalyst exhibited little H(2) oxidation activity, in contrast to Pt-based catalysts.

Lifestyle, Environmental, and Genetic Predictors of Bulky DNA Adducts in a Study Population Nested within a Prospective Danish Cohort

DEFF Research Database (Denmark)

Eriksen, K. T.; Sørensen, M.; Autrup, H.

2010-01-01

Danish cohort. At enrollment, blood samples were collected and information on lifestyle, including dietary and smoking habits, obtained. Previously, bulky DNA adducts were measured in 245 individuals who developed lung cancer and 255 control members of the cohort. Of these 500 individuals, data on 375...... of bulky DNA adduct levels were analyzed by univariate and multivariate regression analyses. Women tended to have higher adduct levels than men. Living in central Copenhagen and surface darkness of fried meat and fish were associated with quantitative higher adduct levels. No significant associations were...

The effects of characteristics of substituents on toxicity of the nitroaromatics: HiT QSAR study

Science.gov (United States)

Kuz'min, Victor E.; Muratov, Eugene N.; Artemenko, Anatoly G.; Gorb, Leonid; Qasim, Mohammad; Leszczynski, Jerzy

2008-10-01

The present study applies the Hierarchical Technology for Quantitative Structure-Activity Relationships (HiT QSAR) for (i) evaluation of the influence of the characteristics of 28 nitroaromatic compounds (some of which belong to a widely known class of explosives) as to their toxicity; (ii) prediction of toxicity for new nitroaromatic derivatives; (iii) analysis of the effects of substituents in nitroaromatic compounds on their toxicity in vivo. The 50% lethal dose concentration for rats (LD50) was used to develop the QSAR models based on simplex representation of molecular structure. The preliminary 1D QSAR results show that even the information on the composition of molecules reveals the main tendencies of changes in toxicity. The statistic characteristics for partial least squares 2D QSAR models are quite satisfactory ( R 2 = 0.96-0.98; Q 2 = 0.91-0.93; R 2 test = 0.89-0.92), which allows us to carry out the prediction of activity for 41 novel compounds designed by the application of new combinations of substituents represented in the training set. The comprehensive analysis of toxicity changes as a function of substituent position and nature was carried out. Molecular fragments that promote and interfere with toxicity were defined on the basis of the obtained models. It was shown that the mutual influence of substituents in the benzene ring plays a crucial role regarding toxicity. The influence of different substituents on toxicity can be mediated via different C-H fragments of the aromatic ring.

Identification of substituent groups and related genes involved in salecan biosynthesis in Agrobacterium sp. ZX09.

Science.gov (United States)

Xu, Linxiang; Cheng, Rui; Li, Jing; Wang, Yang; Zhu, Bin; Ma, Shihong; Zhang, Weiming; Dong, Wei; Wang, Shiming; Zhang, Jianfa

2017-01-01

Salecan, a soluble β-1,3-D-glucan produced by a salt-tolerant strain Agrobacterium sp. ZX09, has been the subject of considerable interest in recent years because of its multiple bioactivities and unusual rheological properties in solution. In this study, both succinyl and pyruvyl substituent groups on salecan were identified by an enzymatic hydrolysis following nuclear magnetic resonance (NMR), HPLC, and MS analysis. The putative succinyltransferase gene (sleA) and pyruvyltransferase gene (sleV) were determined and cloned. Disruption of the sleA gene resulted in the absence of succinyl substituent groups on salecan. This defect could be complemented by expressing the sleA cloned in a plasmid. Thus, the sleA and sleV genes located in a 19.6-kb gene cluster may be involved in salecan biosynthesis. Despite the lack of succinyl substituents, the molecular mass of salecan generated by the sleA mutant did not substantially differ from that generated by the wild-type strain. Loss of succinyl substituents on salecan changed its rheological characteristics, especially a decrease in intrinsic viscosity.

Molecular glasses of azobenzene for holographic data storage applications

Science.gov (United States)

Zarins, Elmars; Balodis, Karlis; Ruduss, Armands; Kokars, Valdis; Ozols, Andris; Augustovs, Peteris; Saharovs, Dmitrijs

2018-05-01

A series of D-N=N-A type molecular glasses where the electron acceptor part (A) contains several electron withdrawing substituents, but the electron donating part (D) of the glassy azochromophores contains amorphous phase promoting non-conjugated bulky triphenyl or hydroxyl groups have been synthesized and investigated. Results showed that the azodye physical properties depend not only on the incorporated electron withdrawing substituents but are also influenced by the bonding type of covalently attached bulky moieties. Synthesized glassy azocompounds showed glass transition temperatures up to 106 °C and thermal stability up to 312 °C. The ability to form holographic gratings in spin-cast thin films of the glassy azodyes was investigated using 532 nm and 633 nm lasers obtaining diffraction efficiency up to 57%, self-diffraction efficiency up to 15% and photosensitivity as high as 3.7 J/(cm2%). Surface relief grating (SRG) depths reached 1.1 μm and in some cases even exceeded the thickness of the films.

Establishment of calibration curve for water measurement in a bulky paper recycling by neutron device

International Nuclear Information System (INIS)

Norpaiza Mohamad Hasan; Glam Hadzir Patai Mohamad; Rasif Mohd Zain; Ismail Mustapha

2010-01-01

A bulk used paper supplied to recycling industry may contain water in their internal voids. This is because the price of the used paper is currently based on their weight and has a huge potential of suppliers to add with water in order to increase the price. Currently used methods for moisture content in a paper are restricted to sheet of paper only. This paper presents a non-intrusive method for quick and in-situ measurement of water content in a bulky used paper. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector are used for water measurement. The experiment is carried out by measuring a series of wet paper that added with known amount of water. As consequent, a neutron calibration curve for water measurement in a bulky used paper is obtained. Six categories of calibration curve have been proposed for correction of weight measurement during purchasing of used paper. (author)

Towards physical interpretation of substituent effects: the case of N- and C3-substituted pyrrole derivatives

Czech Academy of Sciences Publication Activity Database

Zborowski, K. K.; Szatylowicz, H.; Stasyuk, Olga A.; Krygowski, T. M.

2017-01-01

Roč. 28, č. 4 (2017), s. 1223-1227 ISSN 1040-0400 Institutional support: RVO:61388963 Keywords : substituent effect * pyrrole derivatives * Hammett equation * charges of the substituent active region Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.582, year: 2016 https://link.springer.com/article/10.1007%2Fs11224-017-0938-7

Molecules with Linear π-Conjugated Pathways between All Substituents : Omniconjugation

NARCIS (Netherlands)

Veen, Marleen H. van der; Rispens, Minze T.; Jonkman, Harry T.; Hummelen, Jan C.

2004-01-01

In this paper, omniconjugation is introduced as a topological phenomenon in π-conjugated systems. Omniconjugated molecules are defined by the fact that they provide direct and fully π-conjugated pathways between all substituents attached to them. Surprisingly, until now such topologies have never

A Computational Study of Structure and Reactivity of N-Substitued-4-Piperidones Curcumin Analogues and Their Radical Anions

Directory of Open Access Journals (Sweden)

Maximiliano Martínez-Cifuentes

2016-12-01

Full Text Available In this work, a computational study of a series of N-substitued-4-piperidones curcumin analogues is presented. The molecular structure of the neutral molecules and their radical anions, as well as their reactivity, are investigated. N-substituents include methyl and benzyl groups, while substituents on the aromatic rings cover electron-donor and electron-acceptor groups. Substitutions at the nitrogen atom do not significantly affect the geometry and frontier molecular orbitals (FMO energies of these molecules. On the other hand, substituents on the aromatic rings modify the distribution of FMO. In addition, they influence the capability of these molecules to attach an additional electron, which was studied through adiabatic (AEA and vertical electron affinities (VEA, as well as vertical detachment energy (VDE. To study electrophilic properties of these structures, local reactivity indices, such as Fukui (f+ and Parr (P+ functions, were calculated, and show the influence of the aromatic rings substituents on the reactivity of α,β-unsaturated ketones towards nucleophilic attack. This study has potential implications for the design of curcumin analogues based on a 4-piperidone core with desired reactivity.

Definition of bulky disease in early stage Hodgkin lymphoma in computed tomography era: prognostic significance of measurements in the coronal and transverse planes.

Science.gov (United States)

Kumar, Anita; Burger, Irene A; Zhang, Zhigang; Drill, Esther N; Migliacci, Jocelyn C; Ng, Andrea; LaCasce, Ann; Wall, Darci; Witzig, Thomas E; Ristow, Kay; Yahalom, Joachim; Moskowitz, Craig H; Zelenetz, Andrew D

2016-10-01

Disease bulk is an important prognostic factor in early stage Hodgkin lymphoma, but its definition is unclear in the computed tomography era. This retrospective analysis investigated the prognostic significance of bulky disease measured in transverse and coronal planes on computed tomography imaging. Early stage Hodgkin lymphoma patients (n=185) treated with chemotherapy with or without radiotherapy from 2000-2010 were included. The longest diameter of the largest lymph node mass was measured in transverse and coronal axes on pre-treatment imaging. The optimal cut off for disease bulk was maximal diameter greater than 7 cm measured in either the transverse or coronal plane. Thirty patients with maximal transverse diameter of 7 cm or under were found to have bulk in coronal axis. The 4-year overall survival was 96.5% (CI: 93.3%, 100%) and 4-year relapse-free survival was 86.8% (CI: 81.9%, 92.1%) for all patients. Relapse-free survival at four years for bulky patients was 80.5% (CI: 73%, 88.9%) compared to 94.4% (CI: 89.1%, 100%) for non-bulky; Cox HR 4.21 (CI: 1.43, 12.38) (P=0.004). In bulky patients, relapse-free survival was not impacted in patients treated with chemoradiotherapy; however, it was significantly lower in patients treated with chemotherapy alone. In an independent validation cohort of 38 patients treated with chemotherapy alone, patients with bulky disease had an inferior relapse-free survival [at 4 years, 71.1% (CI: 52.1%, 97%) vs 94.1% (CI: 83.6%, 100%), Cox HR 5.27 (CI: 0.62, 45.16); P=0.09]. Presence of bulky disease on multidimensional computed tomography imaging is a significant prognostic factor in early stage Hodgkin lymphoma. Coronal reformations may be included for routine Hodgkin lymphoma staging evaluation. In future, our definition of disease bulk may be useful in identifying patients who are most appropriate for chemotherapy alone. Copyright© Ferrata Storti Foundation.

Bimetallic ruthenium complexes bridged by divinylphenylene bearing oligo(ethylene glycol)methylether: synthesis, (spectro)electrochemistry and the lithium cation effect.

Science.gov (United States)

Tian, Li Yan; Liu, Yuan Mei; Tian, Guang-Xuan; Wu, Xiang Hua; Li, Zhen; Kou, Jun-Feng; Ou, Ya-Ping; Liu, Sheng Hua; Fu, Wen-Fu

2014-03-14

A series of 1,4-disubstituted ruthenium-vinyl complexes, (E,E)-[{(PMe3)3(CO)ClRu}2(μ-HC=CH-Ar-CH=CH)], in which the 1,4-diethenylphenylene bridge bears two oligo(ethylene glycol)methyl ether side chains at different positions (2,5- and 2,3-positions), were prepared. The respective products were characterized by elemental analyses and NMR spectroscopy. The structures of complexes 1b and 1e were established by X-ray crystallography. The electronic properties of the complexes were investigated by cyclic voltammetry, and IR and UV-vis/NIR spectroscopies. Electrochemical studies showed that the 2,5-substituents better stabilized the mixed-valence states; the electrochemical behavior was greatly affected by lithium cations, especially complex 1g with 2,3-substituents, which was further supported by IR and UV-vis/NIR spectra changes. Spectroelectrochemical studies showed that the redox chemistry was dominated by the non-innocent character of the bridging fragment.

The substituent and solvent effects on the antioxidant activity of the ferulic acid derivations

International Nuclear Information System (INIS)

Najafi, M.; Bukhari, S.A.

2014-01-01

The antioxidant activity of ortho and meta substituted ferulic acid derivatives have been investigated in the gas phase and water. The reaction enthalpies of antioxidant activity of studied derivatives have been calculated and compared with corresponding values of ferulic acid. Results show that EWG substituents increase the BDE, IP, while EDG ones cause a rise in the PA. The ferulic acid derivatives with lowest BDE, IP and PA values were identified as the compounds with high antioxidant activity. Results show that the substituents at ortho position have high potential for synthesis of novel ferulic acid derivatives. Results show that ferulic acid derivatives can process their protective role via HAT and SPLET mechanism in gas phase and solvent, respectively. The calculated reaction enthalpies of the substituted ferulic acids have linear dependences with Hammett constants and EHOMO that can be utilized in the selection of suitable substituents for the synthesis of novel antioxidants based on ferulic acid. (author)

The proton transfer reaction in malonaldehyde derivatives: Substituent effects and quasi-aromaticity of the proton bridge

International Nuclear Information System (INIS)

Palusiak, Marcin; Simon, Silvia; Sola, Miquel

2007-01-01

The proton transfer in malonaldehyde and in some of its derivatives have been considered in order to study the interrelation between the reaction barrier and the π-delocalization in the quasi-ring. A set of simple and mostly common substituents having different properties in resonance effect according to values of substituents constants were chosen in order to simulate the influence of substitution in position 2 or in position 1 (or 3) of malonaldehyde on the quasi-aromaticity and H-bonding. The following substituents have been taken into consideration: NO, NO 2 , CN, CHO, F, H, CH 3 , OCH 3 , OH, and NH 2 . Our results show that when the substituent is attached at position 2 of the quasi-ring, the resonance effect predominates over the field/inductive effect which leads to changes in H-bonding and quasi-aromaticity of the ring motif, while in the case of 1(3) substitution the field/inductive effect is significantly more effective influencing the HB strength, and thus, the proton transfer barrier. Somehow counterintuitively, for the 1(3) substituted systems, the most stable isomer is the one having the weakest HB and lower aromaticity. The reason for this surprising behaviour is discussed

Effect of substituents on the reactivity of ninhydrin with urea

NARCIS (Netherlands)

Jong, Jacobus A.W.; Moret, Marc Etienne; Verhaar, Marianne C.; Hennink, Wim E.; Gerritsen, Karin G.F.; Van Nostrum, Cornelus F.

2018-01-01

Ninhydrin, i. e. the stable hydrate of the reactive species indanetrione, is a well-known compound used for the quantification of ammonia and amino acids. However, substituent effects on the reactivity of ninhydrin with nucleophiles are not described. In this work, the kinetics of the reaction of

Quinone 1 e ^– and 2 e ^– /2 H ⁺ Reduction Potentials: Identification and Analysis of Deviations from Systematic Scaling Relationships

Energy Technology Data Exchange (ETDEWEB)

Huynh, Mioy T.; Anson, Colin W.; Cavell, Andrew C.; Stahl, Shannon S.; Hammes-Schiffer, Sharon

2016-11-10

Quinones participate in diverse electron transfer and proton-coupled electron transfer processes in chemistry and biology. An experimental study of common quinones reveals a non-linear correlation between the 1 e^– and 2 e^–/2 H⁺ reduction potentials. This unexpected observation prompted a computational study of 128 different quinones, probing their 1 e^– reduction potentials, pKa values, and 2 e^–/2 H⁺ reduction potentials. The density functional theory calculations reveal an approximately linear correlation between these three properties and an effective Hammett constant associated with the quinone substituent(s). However, deviations from this linear scaling relationship are evident for quinones that feature halogen substituents, charged substituents, intramolecular hydrogen bonding in the hydroquinone, and/or sterically bulky substituents. These results, particularly the different substituent effects on the 1 e^– versus 2 e^– /2 H⁺ reduction potentials, have important implications for designing quinones with tailored redox properties.

Substituent Effects on the Hydrogen Bonding Between Phenolate and HF, H2O and NH3

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

B3LYP/6-31+g(d) calculations were performed on the hydrogen bonded complexes between substituted phenolates and HF, H2O as well as NH3. It was found that some properties of the non-covalent complexes, including the interaction energies, donor-acceptor (host-guest) distances, bond lengths, and vibration frequencies, could show well-defined substituent effects. Thus, from the substituent studies we can not only understand the mechanism of a particular non-covalent interaction better, but also easily predict the interaction energies and structures of a particular non-covalent complex, which might otherwise be very hard or resource-consuming to be known. This means that substituent effect is indeed a useful tool to be used in supramolecular chemistry and therefore, many valuable studies remain to be carried out.

Synthesis and characterization of bulky mesoporous silica Pd-MCM-41

International Nuclear Information System (INIS)

Nagata, Hidezumi; Nakahira, Atsushi; Hirao, Norie; Baba, Yuji; Onoki, Takamasa; Yamasaki, Yuki

2008-01-01

Bulky palladium catalyst supported on mesoporous silica MCM-41 (Pd-MCM-41) was successfully synthesized by hydrothermal hot-pressing method. In this study, the structure of the palladium species in Pd-MCM-41 bulk before and after heat-treatment process was revealed by X-ray diffraction (XRD), X-ray absorption near edge structure (XANES) and transmission electron microscopy (TEM). Also, the microstructure and mesoporous property of Pd-MCM-41 bulk was discussed. As a result, it was revealed that these dense Pd-MCM-41 bulks possessed a high surface area of over 1000 m 2 /g and the structure of palladium of Pd-MCM-41 bulk is almost equal to palladium (0) metal. (author)

Solid-state emissive triarylborane-based BODIPY dyes: photophysical properties and fluorescent sensing for fluoride and cyanide ions.

Science.gov (United States)

Fu, Guang-Liang; Pan, Hong; Zhao, Yi-Hong; Zhao, Cui-Hua

2011-12-07

We disclose two novel BODIPY dyes, which contain the bulky substituent, [(4-dimesitylboryl)phenyl]ethynyl at 2- and 2,6-positions. The steric bulkiness of the boryl group is effective to suppress the intermolecular interaction in the solid state and thus these two compounds display intense fluorescence not only in solution but also in the solid state. In addition, the BODIPY dyes display sensitive fluorescence responses to fluoride and cyanide anions through the complexation with the boron center of the boryl group and the subsequent decomposition of the BODIPY core, illustrating their potential uses for the fluorescence sensing of fluoride and cyanide ions.

Effect of substituents on electronic properties, thin film structure and device performance of dithienothiophene-phenylene cooligomers

International Nuclear Information System (INIS)

Zhang Shiming; Guo Yunlong; Xi Hongxia; Di Chongan; Yu Jian; Zheng Kai; Liu Ruigang; Zhan Xiaowei; Liu Yunqi

2009-01-01

Dithienothiophene-phenylene cooligomers with n-hexyloxy or n-dodecyloxy substituents have been synthesized and compared to the previously reported unsubstituted parent compound. The effect of substituents on the thermal, electronic, optical, thin film structure and field-effect transistor (OFET) properties was investigated. Structural phase transitions from highly-ordered nanocrystalline to liquid crystalline were observed at 241 and 213 deg. C for n-hexyloxy- and n-dodecyloxy-substituted compounds respectively, different from the parent compound. For the alkoxy-substituted compounds, the absorption spectra in thin film blue shift 50 nm, while the fluorescence spectra in thin film red shift 88-100 nm compared to those in solution. The OFET devices based on the alkoxy-substituted compounds exhibit mobilities as high as ca 0.02 cm 2 V -1 s -1 and their performance is sensitive to the alkoxy substituents and substrate temperatures

Delocalization does not always stabilize : a quantum chemical analysis of -substituent effects on 54 alkyl and vinyl cations

NARCIS (Netherlands)

Alem, van K.; Lodder, G.; Zuilhof, H.

2002-01-01

The effects of -substituents on alkyl and vinyl cations are studied using high-level ab initio calculations. The geometries, stabilities, and electronic properties of 27 alkyl cations and 27 vinyl cations with -substituents are computed at the B3LYP/6-311 G(d,p), MP2/6-311 G(d,p), and CBS-Q levels.

Role of substituents on the reactivity and electron density profile of ...

Indian Academy of Sciences (India)

Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 5. Role of substituents on the reactivity and electron density profile of diimine ligands: A density functional theory based study. Bhakti S Kulkarni Deepti Mishra Sourav Pal. Volume 125 Issue 5 September 2013 pp 1247-1258 ...

Anaerobic C1 metabolism of the O-methyl-14C-labeled substituent of vanillate

International Nuclear Information System (INIS)

Frazer, A.C.; Young, L.Y.

1986-01-01

The O-methyl substituents of aromatic compounds constitute a C 1 growth substrate for a number of taxonomically diverse anaerobic acetogens. In this study, strain TH-001, an O-demethylating obligate anaerobe, was chosen to represent this physiological group, and the carbon flow when cells were grown on O-methyl substituents as a C 1 substrate was determined by 14 C radiotracer techniques. O-[methyl- 14 C]vanillate (4-hydroxy-3-methoxy-benzoate) was used as the labeled C 1 substrate. The data showed that for every O-methyl carbon converted to [ 14 C]acetate, two were oxidized to 14 CO 2 . Quantitation of the carbon recovered in the two products, acetate and CO 2 , indicated that acetate was formed in part by the fixation of unlabeled CO 2 . The specific activity of 14 C in acetate was 70% of that in the O-methyl substrate, suggesting that only one carbon of acetate was derived from the O-methyl group. Thus, it is postulated that the carboxyl carbon of the product acetate is derived from CO 2 and the methyl carbon is derived from the O-methyl substituent of vanillate

Heavy Atom Substituents as Molecular Probes for Solvent Effects on the Dynamics of Short-lived Triplet Exciplexes

OpenAIRE

Winter, Gerhard; Steiner, Ulrich

1980-01-01

The influence of heavy atom substituents (Br, I) in the electron donor aniline on the electron transfer reaction with thiopyronine triplet is investigated by flash spectroscopy in solvents of different viscosity and polarity. Triplet quenching constants and radical yields are determined. The results are analysed in terms of decay constants of an intermediate triplet exciplex where the heavy atom substituents significantly enhance the intersystem crossing process leading to singlet ground stat...

Structural differences of half-sandwich complexes of scandium and yttrium containing bulky substituents

Czech Academy of Sciences Publication Activity Database

Fridrichová, Adéla; Růžička, A.; Lamač, Martin; Horáček, Michal

2017-01-01

Roč. 76, FEB 2017 (2017), s. 62-66 ISSN 1387-7003 R&D Projects: GA ČR(CZ) GAP207/12/2368 Institutional support: RVO:61388955 Keywords : scandium * yttrium * half-sandwich Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.640, year: 2016

Interaction between D-fructose dehydrogenase and methoxy-substituent-functionalized carbon surface to increase productive orientations

International Nuclear Information System (INIS)

Xia, Hong-qi; Hibino, Yuya; Kitazumi, Yuki; Shirai, Osamu; Kano, Kenji

2016-01-01

Highlights: • Methoxy-functionalized surface improves the DET-type bioelectrocatalysis of FDH. • Methoxy-functionalized surface increases productive orientations. • The total catalytic activity of FDH is almost independent of the modification. • High current density as well as good stability is useful for biofuel cells. - Abstract: D-Fructose dehydrogenase (FDH) from Gluconobacter japonicus NBRC3260 catalyzes the two-electron oxidation of D-fructose to 5-keto-D-fructose, and it is widely used in biofuel cells and biosensors. In this study, methoxy-substituent-functionalized carbon electrodes are constructed by electrochemical oxidation of methoxy-aniline derivatives on Ketjen Black (KB)-modified electrodes to improve the immobilization and bioelectrocatalysis of FDH. It is proposed that the specific interaction between FDH, especially the heme c moiety, and methoxy substituent(s) of amines on carbon electrode increases the proportion of the productively oriented FDH molecules to the total FDHs. Consequently, the limiting catalytic current density of the D-fructose oxidation increases to as much as 23 ± 2 mA cm −2 in FDH/2,4-dimethoxyaniline/KB/glassy carbon electrode, for example.

Substituent effects on the excited states of phenyl-capped phenylene vinylene tetramers

NARCIS (Netherlands)

Candeias, L.P.; Gelinck, G.H.; Piet, J.J.; Piris, J.; Wegewijs, B.; Peeters, E.; Wildeman, J.; Hadziioannou, G.; Müllen, K.

2001-01-01

The singlet and triplet excited states of phenyl-capped tetramers of phenylene vinylene with different alkyl, alkoxy or cyano substituents, were investigated in benzene solution. The lowest singlet states were studied by laser flash-photolysis with time-resolved microwave conductivity and

Bulky DNA adducts in white blood cells: a pooled analysis of 3,600 subjects

DEFF Research Database (Denmark)

Ricceri, Fulvio; Godschalk, Roger W; Peluso, Marco

2010-01-01

Bulky DNA adducts are markers of exposure to genotoxic aromatic compounds, which reflect the ability of an individual to metabolically activate carcinogens and to repair DNA damage. Polycyclic aromatic hydrocarbons (PAHs) represent a major class of carcinogens that are capable of forming such add...... such adducts. Factors that have been reported to be related to DNA adduct levels include smoking, diet, body mass index (BMI), genetic polymorphisms, the season of collection of biologic material, and air pollutants....

Carborane-stilbene dyads: the influence of substituents and cluster isomers on photoluminescence properties.

Science.gov (United States)

Ferrer-Ugalde, A; Cabrera-González, J; Juárez-Pérez, E J; Teixidor, F; Pérez-Inestrosa, E; Montenegro, J M; Sillanpää, R; Haukka, M; Núñez, R

2017-02-14

Two novel styrene-containing meta-carborane derivatives substituted at the second carbon cluster atom (C c ) with either a methyl (Me) or a phenyl (Ph) group are introduced herein along with a new set of stilbene-containing ortho- (o-) and meta- (m-) carborane dyads. The latter set of compounds have been prepared from styrene-containing carborane derivatives via a Heck coupling reaction. High regioselectivity has been achieved for these compounds by using a combination of palladium complexes [Pd 2 (dba) 3 ]/[Pd(t-Bu 3 P) 2 ] as a catalytic system, yielding exclusively E isomers. All compounds have been fully characterised and the crystal structures of seven of them were analysed by X-ray diffraction. The absorption spectra of these compounds are similar to those of their respective fluorophore groups (styrene or stilbene), showing a very small influence of the substituent (Me or Ph) linked to the second C c atom or the cluster isomer (o- or m-). On the other hand, fluorescence spectroscopy revealed high emission intensities for Me-o-carborane derivatives, whereas their Ph-o-carborane analogues evidenced an almost total lack of fluorescence, confirming the significant role of the substituent bound to the adjacent C c in o-carboranes. In contrast, all the m-carborane derivatives display similar photoluminescence (PL) behavior regardless of the substituent attached to the second C c , demonstrating its small influence on emission properties. Additionally, m-carborane derivatives are significantly more fluorescent than their o-counterparts, reaching quantum yield values as high as 30.2%. Regarding solid state emission, only stilbene-containing Ph-o-carborane derivatives, which showed very low fluorescence in solution, exhibited notable PL emission in films attributed to aggregation-induced emission. DFT calculations were performed to successfully complement the photoluminescence studies, supporting the experimentally observed photophysical behavior of the styrene and

Materials recovery system for source-separated noncombustible rubbish and bulky waste in Nishinomiya

Energy Technology Data Exchange (ETDEWEB)

Adachi, Yoshihiro

1987-01-01

Since 1980, the city of Nishinomiya has been recovering materials from source-separated non-combustible and bulky waste to reduce the amount of final disposal. Materials amounting to 33-39% of the throughput are recovered in the Shredding and Separation Facility, which consists of a manual separation system, a mechanical separation system, a shredder, a pair of shears and incinerators. The facility system is shown in order of processing of the waste. The secondary pollution control, safety equipment, instrumentation, etc., are also described. The recovery percentage and use of revenues are explained in detail.

Bipolar Alq3-based complexes: Effect of hole-transporting substituent on the properties of Alq3-center

International Nuclear Information System (INIS)

Luo Jianxin; Lu Mangeng; Yang Chaolong; Tong Bihai; Liang Liyan

2012-01-01

Two bipolar Alq 3 -based complexes, tris{5-[(carbazole-9'-yl)methyl]-8-hydroxyquinoline} aluminum (Al(CzHQ) 3 ) and tris{5-[(phenothiazine-9'-yl)methyl]-8-hydroxyquinoline} aluminum (Al(PHQ) 3 ), involving an Alq 3 -center and three hole-transporting substituents (carbazole or phenothiazine), were prepared and characterized. Effects of hole-transporting substituent on the properties of Alq 3 -center were investigated in detail. It is found that the two complexes have improved hole-transporting performance and appropriate thermal stability (the 5%-weight-loss temperatures T 5% >260 °C). Photoluminescence (PL) spectra indicate that both energy transfer and electron transfer can take place simultaneously in the PL process of these complexes. Both thermodynamics and dynamics of the electron transfer were studied and corresponding parameters were calculated. Energy transfer is favorable for the PL of Alq 3 -center, while electron transfer is unfavorable for the PL of Alq 3 -center. These results will be useful to explore novel OLEDs material with increased efficiency. - Highlights: ► Effects of substituent on the properties of Alq 3 -center were investigated. ► Energy transfer and electron transfer can transfer from substituent to Alq 3 -center. ► The thermodynamics and dynamics of electron transfer were studied. ► The mechanisms of PL and EL of Al(CzHQ) 3 were studied and compared with each other.

Bulky abdominal masses in pediatrics: iconographic essay; Massas abdominais volumosas em pediatria: ensaio iconografico

Energy Technology Data Exchange (ETDEWEB)

Reis, Fabiano; Faria, Andreia V.; Kluge, Patricia D.; Volpato, Ricardo G.; Santos, Sergio L.M. dos; Caserta, Nelson M.G. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Ciencias Medicas]. E-mail: fabiano97@bol.com.br

2005-04-15

The ultrasound, computerized tomography and magnetic resonance findings of 19 patients with abdominal bulky masses diagnosed as hydronephrosis, Wilms' tumor, neuroblastoma, adrenal carcinoma, sarcoma, hemangioendothelioma, hepatoblastoma, mesenchymal hamartoma, hepatocellular carcinoma, choledochal cyst, splenic cyst, lymphoma, enteric cyst, teratoma, hydrometrocolpos and lipoma are presented. Imaging findings (including ultrasound, computerized tomography and magnetic resonance imaging) are important tools for the evaluation of abdominal masses in pediatric patients and can contribute to the diagnosis and evaluation of the extension of these diseases. (author)

Influence of Halogen Substituents on the Catalytic Oxidation of 2,4,6-Halogenated Phenols by Fe(III-Tetrakis(p-hydroxyphenyl porphyrins and Potassium Monopersulfate

Directory of Open Access Journals (Sweden)

Seiya Nagao

2011-12-01

Full Text Available The influence of halogen substituents on the catalytic oxidation of 2,4,6-trihalogenated phenols (TrXPs by iron(III-porphyrin/KHSO5 catalytic systems was investigated. Iron(III-5,10,15,20-tetrakis(p-hydroxyphenylporphyrin (FeTHP and its supported variants were employed, where the supported catalysts were synthesized by introducing FeTHP into hydroquinone-derived humic acids via formaldehyde poly-condensation. F (TrFP, Cl (TrCP, Br (TrBP and I (TrIP were examined as halogen substituents for TrXPs. Although the supported catalysts significantly enhanced the degradation and dehalogenation of TrFP and TrCP, the oxidation of TrBP and TrIP was not enhanced, compared to the FeTHP catalytic system. These results indicate that the degree of oxidation of TrXPs is strongly dependent on the types of halogen substituent. The order of dehalogenation levels for halogen substituents in TrXPs was F > Cl > Br > I, consistent with their order of electronegativity. The electronegativity of a halogen substituent affects the nucleophilicity of the carbon to which it is attached. The levels of oxidation products in the reaction mixtures were analyzed by GC/MS after extraction with n-hexane. The most abundant dimer product from TrFP via 2,6-difluoroquinone is consistent with a scenario where TrXP, with a more electronegative halogen substituent, is readily oxidized, while less electronegative halogen substituents are oxidized less readily by iron(III-porphyrin/KHSO5 catalytic systems.

Fine-Tuning of Saponification-Triggered Gelation by Strategic Modification of Peripheral Substituents: Gelation Regulators.

Science.gov (United States)

Kumar, Ashish; Singh, Roop Shikha; Kumar, Amit; Ali, Afsar; Biswas, Arnab; Pandey, Daya Shankar

2016-09-19

A pioneering approach towards controlling the efficiency of saponification assisted gelation in ethyl ester based Zn II -complexes have been described. Using four new ester containing bis-salen Zn II complexes (C1-C4) involving different para-azo phenyl substituted ligands it has been clearly shown that gelation efficiency is greatly influenced by the electronic effects of the substituents (-H (C1), -CH 3 (C2), -NO 2 (C3), and -OCH 3 (C4)). Morphological, photophysical, and rheological investigations corroborated the experimental observations well and established that gelation efficiency was enhanced with electron-withdrawing characteristics of substituents (C4

Substituent effects on the photolysis of methyl 2-carboxylate substituted aliphatic 2 H-azirines

Science.gov (United States)

Gómez-Zavaglia, Andrea; Kaczor, Agnieszka; Cardoso, Ana L.; Pinho e Melo, Teresa M. V. D.; Fausto, Rui

2007-05-01

In this study, the UV induced photochemical reactions of two 2 H-azirines - methyl 2-chloro-3-methyl-2 H-azirine-2-carboxylate (MCMAC) and methyl 3-methyl-2 H-azirine-2-carboxylate (MMAC) - isolated in argon matrices are compared. For both compounds, irradiation with λ > 235 nm led to observation of two primary photoprocesses: (a) C sbnd C bond cleavage, with production of nitrile ylides (P1-type products), and (b) C sbnd N bond cleavage, with production of methylated ketene imines (P2-type products). However, subsequent photoprocesses were found to be different in the two cases. In MCMAC, both primary photoproducts were shown to undergo further reactions: P1-type products decarboxylate, giving [(1-chloroethylidene)imino]ethanide, which bears a C dbnd N +dbnd C - group (P3-type product); P2-type products decarbonylate, yielding a substituted ylidene methanamine (P4-type product). In MMAC, only P2-type primary photoproducts appeared to react, undergoing decarbonylation or decarboxylation (both reactions leading to P4-type products), whereas P1-type products were found to be non-reactive. The non-observation of any secondary photoproduct resulting from photolysis of P1-MMAC revealed the higher photostability of this species when compared with the corresponding photoproduct obtained from MCMAC. The C sbnd N photochemical cleavage is an unusual process in aliphatic 2 H-azirines. In the studied compounds, its preference over the commonly observed C sbnd C azirine-ring bond photocleavage is attributed to the presence of electron withdrawing substituents (methylcarboxy group in both azirines and also the chlorine atom in MCMAC), which accelerates intersystem crossing towards the triplet state from where the cleavage of the C sbnd N bond takes place. The lack of the chlorine atom in MMAC may be partially compensated by the significantly higher stabilization of the P2-type photoproduct derived from this molecule ( ca. -52 kJ mol -1) relatively to the reactant, when

Eradicative brachytherapy with hyaluronate gel injection into pararectal space in treatment of bulky vaginal stump recurrence of uterine cancer

International Nuclear Information System (INIS)

Kishi, Kazushi; Mabuchi, Yasushi; Sonomura, Tetsuo; Shirai, Shintaro; Noda, Yasutaka; Sato, Morio; Ino, Kazuhiko

2012-01-01

The purpose of this study is to develop a procedure for eradicative brachytherapy that can deliver a curative boost dose to bulky (>4 cm) vaginal stump recurrence of uterine cancer without risk of damaging surrounding organs. We separated risk organs (the rectum and sigmoid) from the target during brachytherapy, with a hyaluronate gel injection into the pararectal space via the percutaneous paraperineal approach under local anesthesia. The rectum anchored to the sacrum by native ligament was expected to shift posteriorly. We encountered a patient with bulky stump recurrence of uterine cancer, approximately 8 cm in maximum diameter. She was complaining of abdominal pain and constipation due to bowel encasement. Following 50 Gy of external beam radiotherapy, we applied a single fraction of brachytherapy under gel separation and delivered 14.5 Gy (50.8 GyE: equivalent dose in 2-Gy fraction calculated with linear quadratic model at α/β=3) to the target. The gel injection procedure was completed in 30 min without complications. A total irradiation dose of 100.8 GyE was delivered to the target and the cumulative minimum dose to the most irradiated rectosigmoidal volume of 2 cc (cumulative D 2cc ) was calculated as 58.5 GyE with gel injection, and was estimated to be 96 GyE without. Over three years, the local stump tumor has completely disappeared, with no complications. Brachytherapy with a pararectal gel injection can be a safe and effective eradicative option for bulky vaginal stump recurrence. (author)

Topotactic intercalation of a bulky organic anion (thiacalix[4]arene) into LDH through an osmotic swelling/restoration reaction in formamide.

Science.gov (United States)

Huang, Gailing; Ma, Shulan; Zhao, Xinhua; Yang, Xiaojing; Ooi, Kenta

2009-01-21

Utilizing the osmotic swelling of LDH in formamide, for the first time, the bulky thiacalix[4]arene anion is introduced, leading to the recovery of LDH layers, and the hexagonal prism morphology of the precursor is well retained.

Therapeutic benefits in grid irradiation on Tomotherapy for bulky, radiation-resistant tumors.

Science.gov (United States)

Narayanasamy, Ganesh; Zhang, Xin; Meigooni, Ali; Paudel, Nava; Morrill, Steven; Maraboyina, Sanjay; Peacock, Loverd; Penagaricano, Jose

2017-08-01

Spatially fractionated radiation therapy (SFRT or grid therapy) has proven to be effective in management of bulky tumors. The aim of this project is to study the therapeutic ratio (TR) of helical Tomotherapy (HT)-based grid therapy using linear-quadratic cell survival model. HT-based grid (or HT-GRID) plan was generated using a patient-specific virtual grid pattern of high-dose cylindrical regions using MLCs. TR was defined as the ratio of normal tissue surviving fraction (SF) under HT-GRID irradiation to an open debulking field of an equivalent dose that result in the same tumor cell SF. TR was estimated from DVH data on ten HT-GRID patient plans with deep seated, bulky tumor. Dependence of the TR values on radiosensitivity of the tumor cells and prescription dose was analyzed. The mean ± standard deviation (SD) of TR was 4.0 ± 0.7 (range: 3.1-5.5) for the 10 patients with single fraction maximum dose of 20 Gy to GTV assuming a tumor cell SF at 2 Gy (SF2 t ) value of 0·5. In addition, the mean ± SD of TR values for SF2 t values of 0.3 and 0.7 were found to be 1 ± 0.1 and 18.0 ± 5.1, respectively. Reducing the prescription dose to 15 and 10 Gy lowered the respective TR values to 2.0 ± 0.2 and 1.2 ± 0.04 for a SF2 t value of 0.5. HT-GRID therapy demonstrates a significant therapeutic advantage over uniform dose from an open field irradiation for the same tumor cell kill. TR increases with the radioresistance of the tumor cells and with prescription dose.

Substituent effects in the ortho position: Model compounds with a removed reaction centre

Czech Academy of Sciences Publication Activity Database

Böhm, S.; Exner, Otto

2007-01-01

Roč. 81, 5/6 (2007), s. 993-1006 ISSN 0137- 5083 Institutional research plan: CEZ:AV0Z40550506 Keywords : substituent effect * density functional theory * ortho effect * steric effect Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.483, year: 2007

Maternal diet and dioxin-like activity, bulky DNA adducts and micronuclei in mother-newborns

DEFF Research Database (Denmark)

Pedersen, Marie; Halldorsson, Thorhallur I; Autrup, Herman

2012-01-01

Maternal diet can contribute to carcinogenic exposures and also modify effects of environmental exposures on maternal and fetal genetic stability. In this study, associations between maternal diet and the levels of dioxin-like plasma activity, bulky DNA adducts in white blood cells and micronuclei...... (MN) in lymphocytes from mother to newborns were examined. From 98 pregnant women living in the greater area of Copenhagen, Denmark in 2006-2007, maternal peripheral blood and umbilical cord blood were collected, together with information on health, environmental exposure and lifestyle. Maternal diet...

Influence of substituents of nickel(II) complexes of Schiff bases of substituted (S)-2-N-(benzylpropyl)aminobenzophenones and amino-acids on their asymmetric induction

International Nuclear Information System (INIS)

Nadvornik, M.; Lycka, A.; Gee, A.; Popkov, A.

1999-01-01

The aim of this work was to study of influence of substituents on benzophenone substituent on thermodynamic controlled induction of complexes as well as influence of substituents on benzyl group and on benzophenone on kinetically controlled asymmetric induction of complexes. [ 13 C]methyl iodide was used in the synthesis. Replace of benzyl group by 2,4,6-trimethylbenzyl group increase kinetically controlled asymmetric induction of synthesis of (S)-α-[ 13 C]methylalanine from 43% d.e. to 66% d.e

Excited-state dynamics of pentacene derivatives with stable radical substituents.

Science.gov (United States)

Ito, Akitaka; Shimizu, Akihiro; Kishida, Noriaki; Kawanaka, Yusuke; Kosumi, Daisuke; Hashimoto, Hideki; Teki, Yoshio

2014-06-23

The excited-state dynamics of pentacene derivatives with stable radical substituents were evaluated in detail through transient absorption measurements. The derivatives showed ultrafast formation of triplet excited state(s) in the pentacene moiety from a photoexcited singlet state through the contributions of enhanced intersystem crossing and singlet fission. Detailed kinetic analyses for the transient absorption data were conducted to quantify the excited-state characteristics of the derivatives. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

New photoresponsive (meth)acrylate (co)polymers containing azobenzene pendant sidegroups with carboxylic and dimethylamino substituents .1. Synthesis and characterization of the monomers

NARCIS (Netherlands)

Haitjema, HJ; Buruma, R; VanEkenstein, GORA; Tan, YY; Challa, G

1996-01-01

New azobenzene-based (az.b.) monomers with CO2H (acid) or N(CH3)(2) (basic) substituents were synthesized. For some of these compounds new synthetic routes had to be developed, especially for the az.b. monomers with a CO2H substituent (azoacids) where their synthesis, purification and (thermal)

Substituent effects on the electron affinities and ionization energies of tria-, penta-, and heptafulvenes: a computational investigation

DEFF Research Database (Denmark)

Dahlstrand, Christian; Yamazaki, Kaoru; Kilså, Kristine

2010-01-01

(TCNQ) and tetrathiafulvalene (TTF) as representing strong electron-acceptor and -donor compounds, respectively. The substituents X at the exocyclic positions of the fulvenes were either NH(2), H, or CN, while the substituents Y at the ring positions were H, Cl, F, CN, or NH(2). The variations...... of bis(fulvene)s, i.e., compounds composed of a donor-type heptafulvene fused with an acceptor-type pentafulvene, and it was revealed that these bis(fulvene)s can be designed so that the IE and EA of the two separate fulvene segments are retained, potentially allowing for the design of compact donor...

Rhodium-catalyzed asymmetric hydroboration of γ,δ-unsaturated amide derivatives: δ-borylated amides.

Science.gov (United States)

Hoang, G L; Zhang, S; Takacs, J M

2018-05-08

γ,δ-Unsaturated amides in which the alkene moiety bears an aryl or heteroaryl substituent undergo regioselective rhodium-catalyzed δ-borylation by pinacolborane to afford chiral secondary benzylic boronic esters. The results contrast the γ-borylation of γ,δ-unsaturated amides in which the disubstituted alkene moiety bears only alkyl substituents; the reversal in regiochemistry is coupled with a reversal in the sense of π-facial selectivity.

Renewable Pentablock Copolymers Containing Bulky Natural Rosin for Tough Bioplastics

Science.gov (United States)

Rahman, Md Anisur; Ganewatta, Mitra S.; Lokupitiya, Hasala N.; Liang, Yuan; Stefik, Morgan; Tang, Chuanbing

Renewable polymers have received significant attention due to environmental concerns on petrochemical counterparts. One of the most abundant natural biomass is resin acids. However, most polymers derived from resin acids are low molecular weight and brittle because of the high chain entanglement molecular weight resulted from the bulky hydrophenanthrene pendant group. It is well established that the brittleness can be overcome by synthesizing multi-block copolymers with low entanglement molecular weight components. We investigated the effects of chain architecture and microdomain orientation on mechanical properties of both tri and pentablock copolymers. We synthesized rosin-containing A-B-A-B-A type pentablock and A-B-A type triblock copolymers to improve their mechanical properties. Pentablock copolymers showed higher strength and better toughness as compared to triblock copolymers, both superior to homopolymers. The greater toughness of pentablock copolymers is due to the presence of the rosin based midblock chains that act as bridging chains between two polynorbornene blocks.

Novel fluoroquinolone derivatives bearing N-thiomide linkage with 6-substituted-2-aminobenzothiazoles: Synthesis and antibacterial evaluation

Directory of Open Access Journals (Sweden)

Prabodh Chander Sharma

2017-02-01

Full Text Available A series of novel fluoroquinolone derivatives bearing N-thiomide linkage with 6-substituted-2-aminobenzothiazole substituents at the C-7 position were synthesized to obtain potent analogs active against bacterial strains. Some compounds exhibited excellent antibacterial activity against Staphylococcus auerus, Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa bacterial strains. Among all the synthesized compounds 6-nitro substituted benzothiazole along with norfloxacin (4b and gatifloxacin (4l showed MIC 05 μg/ml when tested against S. auerus. Moreover, compounds 4d, 4f and 4l showed superior MIC (15, 10, and 15 μg/ml respectively against B. subtilis. The results of the present study reveal that the compounds have significant antibacterial potential and are suitable candidates for further exploration.

Synthesis and Biological Evaluation of Novel Benzimidazole Derivatives Bearing a Heterocyclic Ring at 4/5 Position

International Nuclear Information System (INIS)

Wubulikasimu, Reyila; Yang, Yanbing; Xue, Fei; Luo, Xianjin; Shao, Dongping; Li, Yuhuan; Gao, Rongmei; Ye, Weidong

2013-01-01

A series of novel benzimidazole derivatives bearing a heterocyclic ring as oxadiazole (21-32), thiadiazole (33-34), triazole (35-36) were synthesized and evaluated for their activities against Coxsackie virus B3 and B6 in Vero cells. Compounds 21-26, 31-36 with moieties of 2'-pyridyl, 3'-pyridyl and 4'-pyridyl at the 2-position and oxadiazoles, thiadiazole, or triazole substituent at the 4- or 5-position generally displayed activities against CVB3 and CVB6. Especially compound 24 (IC 50 = 1.08 μg/mL, SI = 61.7 against CVB3) was the promising candidate as lead compound for anti-enteroviral drug. It was observed in the incorporation of heterocyclic rings in benzimidazole at the 5-position could enhance their biological activities

Steric Maps to Evaluate the Role of Steric Hindrance on the IPr NHC Ligand

KAUST Repository

Poater, Albert

2013-06-01

Density functional theory (DFT) calculations were used to predict and rationalize the effect of the modification of the structure of the prototype 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) (IPr) N-heterocyclic carbene (NHC) ligand. The modification consists in the substitution of the methyl groups of ortho isopropyl substituent with phenyl groups, and here we plan to describe how such significant changes effect the metal environment and therefore the related catalytic behaviour by simple steric maps. Bearing in mind that there is a significant structural difference between IPr and IPr* ligands, that translated in different reactivity for several olefin metathesis reactions, here by means of DFT we characterize where the NHC ligand plays a more active role and where it is a simple spectator, or at least its modification does not significantly change its catalytic role/performance. Furthermore, this communication endeavours to modify further the skeleton of the IPr NHC ligand. The optimization of these bulky new systems go to the limits of the DFT computational method.

Synthesis and anticancer activity of N-substituted 2-arylquinazolinones bearing trans-stilbene scaffold.

Science.gov (United States)

Mahdavi, Mohammad; Pedrood, Keyvan; Safavi, Maliheh; Saeedi, Mina; Pordeli, Mahboobeh; Ardestani, Sussan Kabudanian; Emami, Saeed; Adib, Mehdi; Foroumadi, Alireza; Shafiee, Abbas

2015-05-05

A novel series of 2-arylquinazolinones 7a-o bearing trans-stilbene moiety were designed, synthesized, and evaluated against human breast cancer cell lines including human breast adenocarcinoma (MCF-7 and MDA-MB-231) and human ductal breast epithelial tumor (T-47D). Among the tested compounds, the sec-butyl derivative 7h showed the best profile of activity (IC50 < 5 μM) against all cell lines, being 2-fold more potent than standard drug, etoposide. Our investigation revealed that the cytotoxic activity was significantly affected by N3-alkyl substituents. Furthermore, the morphological analysis by acridine orange/ethidium bromide double staining test and flow cytometry analysis indicated that the prototype compound 7h can induce apoptosis in MCF-7 and MDA-MB-231 cells. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Bulky PAH-DNA induced by exposure of a co-culture model of human alveolar macrophages and embryonic epithelial cells to atmospheric particulate pollution

International Nuclear Information System (INIS)

Abbas, Imane; Garcon, Guillaume; Billet, Sylvain; Shirali, Pirouz; Andre, Veronique; Le Goff, Jeremie; Sichel, Francois; Roy Saint-Georges, Francoise; Mulliez, Philippe

2012-01-01

Because of their deep penetration in human lungs, fine airborne particulate matter were described as mainly responsible for the deleterious effects of exposure to air pollution on health. Organic constituents are adsorbed on particles surface and, after inhalation, some (polycyclic aromatic hydrocarbons, PAHs) can be activated into reactive metabolites and can bind to DNA. The formation of bulky DNA adducts has been researched after exposure of mono-and co-cultures of alveolar macrophages (AM) and human embryonic human lung epithelial (L132), to fine air pollution particulate matter Air samples have been collected with cascade impactor and characterized: size distribution (92.15% 2 /g), inorganic (Fe, AI, Ca, Na, K, Mg, Pb, etc.) and organic compounds (PAHs, etc.). 32 P post-labeling method was applied to detect bulky DNA adducts in AM and L132, in mono-and co-cultures, 72 h after their exposure to atmospheric particles at their Lethals and Effects concentrations or (LC or CE) to 50% (i.e. MA: EC 50 = 74.63 μg/mL and L132: LC-5-0 = 75.36 μg/mL). Exposure to desorbed particles (MA: C1= 61.11 μg/mL and L132 : C2 = 61.71 μg/mL) and B[a]P (1 μM) were included. Bulky PAH-DNA adducts were detected in AM in mono-culture after exposure to total particles (Pt), to B[a]P and desorbed particles (Pd). Whatever the exposure, no DNA adduct was detected in L132 in mono-culture. These results are coherent with the enzymatic activities of cytochrome P450 l Al in AM and L132. Exposure of co-culture to Pt, or Pd induced bulky adducts to DNA in AM but not in L132. Exposure to B[a]P alone has altered the DNA of AM and L132, in co-culture. Exposure to Pt is closer to the environmental conditions, but conferred an exposure to amounts of genotoxic agents compared to studies using organic extracts. The formation of bulky DNA adducts was nevertheless observed in AM exposed to Pt, in mono- or co-culture, indicating that they were competent in terms of metabolic activation of PAHs. The

Synthesis and Electroluminescent Properties of Julolidine-π-Juloidine Type Materials with the Bulky Adamantane Groups

Energy Technology Data Exchange (ETDEWEB)

Lee, Kum Hee; Yoon, Seung Soo [Sungkyunkwan Univ., Suwon (Korea, Republic of); Lee, Seok Jae; Kim, Young Kwan [Hongik Univ., Seoul (Korea, Republic of)

2012-11-15

A main problem of red emitting material, which contributes to their low EL performances, is the concentration quenching due to the effective self aggregation and the consequent formation of excimers. To avoid this drawback and thus improve the EL properties of red fluorescent OLED devices, many synthetic efforts have been conducted to develop new emitting materials with the structural motifs to suppress self-aggregation by the weakening intermolecular attractive interactions. Particularly, the introduction of bulky moieties in the emitters would provide the steric hindrance between emitting materials in solid state devices and thus reduce the self-aggregation. Nevertheless, EL performances of red materials still need to be improved for the practical applications. In conclusion, we designed and synthesized three julolidine-π-juloidine type emitting materials (1-3) with the bulky adamantane groups. To study their electroluminescent properties, the multilayered OLED devices with the structure of ITO/NPB (40 nm)/ADN : 1-3 (x%) (20 nm)/Alq{sub 3} (40 nm)/Liq (2 nm)/Al were fabricated. All devices using emitters 1-3 showed the efficient emissions, in which their EL performances depend on the structure of emitters sensitively. Particularly, a device using emitter 3 exhibited the efficient orange-red emission with the luminous and power efficiencies of 4.79 cd/A and 1.76 lm/W at 20 mA/cm{sup 2}, respectively. The CIE coordinates of this device was (0.57, 0.42) at 7.0 V.

Substituent Inductive Effects on the Electrochemical Oxidation of Flavonoids Studied by Square Wave Voltammetry and Ab Initio Calculations.

Science.gov (United States)

Arroyo-Currás, Netzahualcóyotl; Rosas-García, Víctor M; Videa, Marcelo

2016-10-27

Flavonoids are natural products commonly found in the human diet that show antioxidant, anti-inflammatory and anti-hepatotoxic activities. These nutraceutical properties may relate to the electrochemical activity of flavonoids. To increase the understanding of structure-electrochemical activity relations and the inductive effects that OH substituents have on the redox potential of flavonoids, we carried out square-wave voltammetry experiments and ab initio calculations of eight flavonoids selected following a systematic variation in the number of hydroxyl substituents and their location on the flavan backbone: three flavonols, three anthocyanidins, one anthocyanin and the flavonoid backbone flavone. We compared the effect that the number of -OH groups in the ring B of flavan has on the oxidation potential of the flavonoids considered, finding linear correlations for both flavonols and anthocyanidins ( R 2 = 0.98 ). We analyzed the effects that position and number of -OH substituents have on electron density distributions via ab initio quantum chemical calculations. We present direct correlations between structural features and oxidation potentials that provide a deeper insight into the redox chemistry of these molecules.

Substituent Effects on the Hydrogen Bonding between 4-Substituted Phenols and HF, H2O, NH3

Institute of Scientific and Technical Information of China (English)

程宇辉; 傅尧; 刘磊; 郭庆祥

2003-01-01

Density function theory UB3LYP/6-31+g(d) calculations were performed to study the hydrogen bonds between para-substituted phenols and HF, H2O, or NH3. It revealed that many properties of the non-covalent complexes, such as the interaction energies, donor-acceptor distances, bond lengths and vibration frequencies, showed well-defined substituent effects. Therefore, from the substituent effects not only the mechanism of a certain non-covalent interaction can be better understood, but also the interaction energies and structures of a certain non-covalent complex, which otherwise might be very hard or resource-consuming to estimate, can be easily predicted.

Low-dose radiation enhances therapeutic HPV DNA vaccination in tumor-bearing hosts.

Science.gov (United States)

Tseng, Chih-Wen; Trimble, Cornelia; Zeng, Qi; Monie, Archana; Alvarez, Ronald D; Huh, Warner K; Hoory, Talia; Wang, Mei-Cheng; Hung, Chien-Fu; Wu, T-C

2009-05-01

Current therapeutic approaches to treatment of patients with bulky cervical cancer are based on conventional in situ ablative modalities including cisplatin-based chemotherapy and radiation therapy. The 5-year survival of patients with nonresectable disease is dismal. Because over 99% of squamous cervical cancer is caused by persistent infection with an oncogenic strain of human papillomavirus (HPV), particularly type 16 and viral oncoproteins E6 and E7 are functionally required for disease initiation and persistence, HPV-targeted immune strategies present a compelling opportunity in which to demonstrate proof of principle. Sublethal doses of radiation and chemotherapeutic agents have been shown to have synergistic effect in combination with either vaccination against cancer-specific antigens, or with passive transfer of tumor-specific cytotoxic T lymphocytes (CTLs). Here, we explored the combination of low-dose radiation therapy with DNA vaccination with calreticulin (CRT) linked to the mutated form of HPV-16 E7 antigen (E7(detox)), CRT/E7(detox) in the treatment of E7-expressing TC-1 tumors. We observed that TC-1 tumor-bearing mice treated with radiotherapy combined with CRT/E7(detox) DNA vaccination generated significant therapeutic antitumor effects and the highest frequency of E7-specific CD8(+) T cells in the tumors and spleens of treated mice. Furthermore, treatment with radiotherapy was shown to render the TC-1 tumor cells more susceptible to lysis by E7-specific CTLs. In addition, we observed that treatment with radiotherapy during the second DNA vaccination generated the highest frequency of E7-specific CD8(+) T cells in the tumors and spleens of TC-1 tumor-bearing mice. Finally, TC-1 tumor-bearing mice treated with the chemotherapy in combination with radiation and CRT/E7(detox) DNA vaccination generate significantly enhanced therapeutic antitumor effects. The clinical implications of the study are discussed.

Effect of Bulky and Hydroxyl Groups on Gas Separation Performance of Polyimide Membranes.

Science.gov (United States)

Lee, Bo Mi; Kim, Deuk Ju; Nam, Sang Yong

2015-03-01

A series of polyimides were synthesized by a polycondensation reaction using various aromatic dianhydrides and diamines containing bulky cardo and hydroxyl groups. The imidization and chemical structure of the polyimides were confirmed by NMR and FT-IR. The thermal and gas properties of the polyimides were measured by time-lag, XRD, TGA, and DSC studies. The polyimides showed excellent solubility in common organic solvents and high thermal stability. The CO2 selectivity of HPI membrane was higher than traditional polyimides. In particular, the incorporation of hydroxyl groups improved the CO2 permeability of the polyimide due to increased carbon dioxide solubility. The HPI was thermally converted to polybenzoxazole (PBO) at 450 °C.

Bearing system

Science.gov (United States)

Kapich, Davorin D.

1987-01-01

A bearing system includes backup bearings for supporting a rotating shaft upon failure of primary bearings. In the preferred embodiment, the backup bearings are rolling element bearings having their rolling elements disposed out of contact with their associated respective inner races during normal functioning of the primary bearings. Displacement detection sensors are provided for detecting displacement of the shaft upon failure of the primary bearings. Upon detection of the failure of the primary bearings, the rolling elements and inner races of the backup bearings are brought into mutual contact by axial displacement of the shaft.

Cf-252 neutron brachytherapy: an advance for bulky localized cancer therapy

International Nuclear Information System (INIS)

Maruyama, Y.

1984-01-01

The physical and radiobiogical basis as well as the rationale for neutron brachytherapy, using Cf-252, in human cancer therapy is reviewed. Cf-252 brachytherapy represents an economical and effective form of neutron radiotherapy that is readily and safely applied clinically. It can be used anywhere in the world without unusual personnel, equipment or facilities, or prohibitive expenses or maintenance costs. Used on bulky head and neck, thoracic, abdominal, pelvic, brain and appendage cancers, it overcomes hypoxic radioresistance and produces remarkable rates of tumor clearance. It is easily combined with photon radiotherapy and in proper schedules and doses, it can control advanced but still localized regional cancers to produce tumor cure. It will clear the local manifestations of recurrent or metastatic tumors or advanced stages of primary tumors and therefore in conjunction with other adjuvant therapies offers much more effective tumor control and palliation than present conventional therapy. (Auth.)

A self-seeded, surfactant-directed hydrothermal growth of single crystalline lithium manganese oxide nanobelts from the commercial bulky particles.

Science.gov (United States)

Zhang, Lizhi; Yu, Jimmy C; Xu, An-Wu; Li, Quan; Kwong, Kwan Wai; Wu, Ling

2003-12-07

Single crystalline lithium manganese oxide nanobelts were obtained through a self-seeded, surfactant-directed growth process from the commercial bulky particles under hydrothermal treatment. A possible mechanism was proposed to explain the growth of the nanobelts. This new process could be extended to prepare other one-dimensional nanomaterials such as Se nanorods, Te nanotubes, and MnO2 nanowires.

Substituent Effects on the Stability of Thallium and Phosphorus Triple Bonds: A Density Functional Study.

Science.gov (United States)

Lu, Jia-Syun; Yang, Ming-Chung; Su, Ming-Der

2017-07-05

Three computational methods (M06-2X/Def2-TZVP, B3PW91/Def2-TZVP and B3LYP/LANL2DZ+dp) were used to study the effect of substitution on the potential energy surfaces of RTl≡PR (R = F, OH, H, CH₃, SiH₃, SiMe(Si t Bu₃)₂, Si i PrDis₂, Tbt (=C₆H₂-2,4,6-(CH(SiMe₃)₂)₃), and Ar* (=C₆H₃-2,6-(C₆H₂-2, 4,6- i -Pr₃)₂)). The theoretical results show that these triply bonded RTl≡PR compounds have a preference for a bent geometry (i.e., ∠R⎼Tl⎼P ≈ 180° and ∠Tl⎼P⎼R ≈ 120°). Two valence bond models are used to interpret the bonding character of the Tl≡P triple bond. One is model [I], which is best described as TlP. This interprets the bonding conditions for RTl≡PR molecules that feature small ligands. The other is model [II], which is best represented as TlP. This explains the bonding character of RTl≡PR molecules that feature large substituents. Irrespective of the types of substituents used for the RTl≡PR species, the theoretical investigations (based on the natural bond orbital, the natural resonance theory, and the charge decomposition analysis) demonstrate that their Tl≡P triple bonds are very weak. However, the theoretical results predict that only bulkier substituents greatly stabilize the triply bonded RTl≡PR species, from the kinetic viewpoint.

Understanding and solving disorder in the substitution pattern of amino functionalized MIL-47(V).

Science.gov (United States)

Heinen, Jurn; Dubbeldam, David

2016-03-14

Electronic energies and elastic constants of four amino functionalized MIL-47(V) supercells were computed using plane wave density functional theory to determine the influence of the substituent positions on the organic linker. An inverse relationship between the ab initio energies and the elastic constants was found, indicating that the high electronic stability correlates with high mechanical stability. Torsion in all supercells was induced upon substitution, which caused strain in the NH2-MIL-47(V) supercell. The combined effect of the substituent bulkiness and the induced torsion reduced the pore volume of the NH2-MIL-47(V) structures by >7% and the surface area by >14% with respect to MIL-47(V). This reduction was confirmed by lower saturation capacities of methane, CO2 and benzene. When unfavourable substituent positions are chosen, large torsions caused a further reduction of the saturation capacity. Differences in surface area, pore volume and saturation capacity illustrate the importance of choosing the correct NH2-MIL-47(V) supercell.

The Diels-Alder Cycloaddition Reaction of Substituted Hemifullerenes with 1,3-Butadiene: Effect of Electron-Donating and Electron-Withdrawing Substituents.

Science.gov (United States)

Mojica, Martha; Méndez, Francisco; Alonso, Julio A

2016-02-12

The Diels-Alder (DA) reaction provides an attractive route to increase the number of six member rings in substituted Polycyclic Aromatic Hydrocarbons (PAHs). The density functional theory (DFT) B3LYP method has been used in this work to inquire if the substitution of H over the edge of triindenetriphenylene (pristine hemifullerene 1) and pentacyclopentacorannulene (pristine hemifullerene 2), could improve the DA cycloaddition reaction with 1,3-butadiene. The substituents tested include electron-donating (NH₂, OMe, OH, Me, i-Pr) and electron-withdrawing groups (F, COOH, CF₃, CHO, CN, NO₂). The electronic, kinetic and thermodynamic parameters of the DA reactions of the substituted hemifullerenes with 1,3-butadiene have been analyzed. The most promising results were obtained for the NO₂ substituent; the activation energy barriers for reactions using this substituent were lower than the barriers for the pristine hemifullerenes. This leads us to expect that the cycloadditions to a starting fullerene fragment will be possible.

Relative substituent orientation in the structure of cis-3-chloro-1,3-dimethyl-N-(4-nitrophenyl-2-oxocyclopentane-1-carboxamide

Directory of Open Access Journals (Sweden)

Matthias Zeller

2014-09-01

Full Text Available The structure of the title compound, C14H15ClN2O4, prepared by reaction of a methacryloyl dimer with nitroaniline, was determined to establish the relative substituent orientation on the cyclopentanone ring. In agreement with an earlier proposed reaction mechanism, the amide group and the methyl group adjacent to the chloro substituent adopt equatorial positions and relative cis orientation, whereas the Cl substituent itself and the methyl group adjacent to the amide have axial orientations relative to the mean plane of the five-membered ring. The conformation of the molecule is stabilized by one classical N—H...O (2.18 Å and one non-classical C—H...O (2.23 Å hydrogen bond, each possessing an S(6 graph-set motif. The crystal packing is defined by several non-classical intramolecular hydrogen bonds, as well as by partial stacking of the aromatic rings.

Journal bearing

Science.gov (United States)

Menke, John R.; Boeker, Gilbert F.

1976-05-11

1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

Camshaft bearing arrangement

Energy Technology Data Exchange (ETDEWEB)

Aoi, K.; Ozawa, T.

1986-06-10

A bearing arrangement is described for the camshaft of an internal combustion engine or the like which camshaft is formed along its length in axial order with a first bearing surface, a first cam lobe, a second bearing surface, a second cam lobe, a third bearing surface, a third cam lobe and a fourth bearing surface, the improvement comprising first bearing means extending around substantially the full circumference of the first bearing surface and journaling the first bearing surface, second bearing means extending around substantially less than the circumference of the second bearing surface and journaling the second bearing surface, third bearing means extending around substantially less than the circumference of the third bearing surface and journaling the third bearing surface, and fourth bearing means extending around substantially the full circumference of the fourth bearing surface and journaling the first bearing surface.

Functional dependency of structures of ionic liquids: do substituents govern the selectivity of enzymatic glycerolysis?

DEFF Research Database (Denmark)

Guo, Zheng; Chen, Biqiang; Murillo, Rafael López

2006-01-01

hydrophobic substituents and hydrophilic ethoxyl or hydroxyl moieties is found, respectively, to be essential for triglycerides (TG) dissolving and equilibrium shifting. The reactions in the ILs with cations consisting of long chain and free hydroxyl groups gave markedly higher conversion of TG and better...

Correlating substituent parameter values to electron transport properties of molecules

International Nuclear Information System (INIS)

Vedova-Brook, Natalie; Matsunaga, Nikita; Sohlberg, Karl

2004-01-01

There are a vast number of organic compounds that could be considered for use in molecular electronics. Because of this, the need for efficient and economical screening tools has emerged. We demonstrate that the substituent parameter values (σ), commonly found in advanced organic chemistry textbooks, correlate strongly with features of the charge migration process, establishing them as useful indicators of electronic properties. Specifically, we report that ab initio derived electronic charge transfer values for 16 different substituted aromatic molecules for molecular junctions correlate to the σ values with a correlation coefficient squared (R 2 ) of 0.863

Metal complexes of alkyl-aryl dithiocarbamates: Structural studies, anticancer potentials and applications as precursors for semiconductor nanocrystals

Science.gov (United States)

Andrew, Fartisincha P.; Ajibade, Peter A.

2018-03-01

Dithiocarbamates are versatile ligands able to stabilize wide range of metal ions in their various oxidation states with the partial double bond character of Csbnd N and Csbnd S of thioureide moiety. Variation of the substituents attached to the nitrogen atom of dithiocarbamate moiety generates various intermolecular interactions, which lead to different structural arrangement in the solid state. The presence of bulky substituents on the N atom obviates the supramolecular aggregation via secondary Msbnd S interactions whereas smaller substituents encourage such aggregation that results in their wide properties and applications. Over the past decades, the synthesis and structural studies of metal complexes of dithiocarbamates have received considerable attention as potential anticancer agents with various degree of DNA binding affinity and cytotoxicity and as single molecule precursors for the preparation of semiconductor nanocrystals. In this paper, we review the synthesis, structural studies, anticancer potency and the use of alkyl-phenyl dithiocarbamate complexes as precursors for the preparation of semiconductor nanocrystals. The properties of these compounds and activities are ascribed to be due to either the dithiocarbamate moieties, the nature or type of the substituents around the dithiocarbamate backbone and the central metal ions or combination of these factors.

Substituent effects on the optical properties of naphthalenediimides: A frontier orbital analysis across the periodic table.

Science.gov (United States)

Mulder, Joshua R; Guerra, Célia Fonseca; Slootweg, J Chris; Lammertsma, Koop; Bickelhaupt, F Matthias

2016-01-15

A comprehensive theoretical treatment is presented for the electronic excitation spectra of ca. 50 different mono-, di-, and tetrasubstituted naphthalenediimides (NDI) using time-dependent density functional theory (TDDFT) at ZORA-CAM-B3LYP/TZ2P//ZORA-BP86/TZ2P with COSMO for simulating the effect of dichloromethane (DCM) solution. The substituents -XHn are from groups 14-17 and rows 2-5 of the periodic table. The lowest dipole-allowed singlet excitation (S0 -S1 ) of the monosubstituted NDIs can be tuned from 3.39 eV for -F to 2.42 eV for -TeH, while the S0 -S2 transition is less sensitive to substitution with energies ranging between 3.67 eV for -CH3 and 3.44 eV for -SbH2 . In the case of NDIs with group-15 and -16 substituents, the optical transitions strongly depend on the extent to which -XHn is planar or pyramidal as well as on the possible formation of intramolecular hydrogen bonds. The accumulative effect of double and quadruple substitution leads in general to increasing bathochromic shifts, but the increased steric hindrance in tetrasubstituted NDIs can lead to deformations that diminish the effectiveness of the substituents. Detailed analyses of the Kohn-Sham orbital electronic structure in monosubstituted NDIs reveal the mesomeric destabilization of the HOMO as the primary cause of the bathochromic shift of the S0-S1 transition. © 2015 Wiley Periodicals, Inc.

Synthesis, Structure Optimization and Antifungal Screening of Novel Tetrazole Ring Bearing Acyl-Hydrazones

Directory of Open Access Journals (Sweden)

Manzoor A. Malik

2012-08-01

Full Text Available Azoles are generally fungistatic, and resistance to fluconazole is emerging in several fungal pathogens. In an attempt to find novel azole antifungal agents with improved activity, a series of tetrazole ring bearing acylhydrazone derivatives were synthesized and screened for their in vitro antifungal activity. The mechanism of their antifungal activity was assessed by studying their effect on the plasma membrane using flow cytometry and determination of the levels of ergosterol, a fungal-specific sterol. Propidium iodide rapidly penetrated a majority of yeast cells when they were treated with the synthesized compounds at concentrations just above MIC, implying that fungicidal activity resulted from extensive lesions of the plasma membrane. Target compounds also caused a considerable reduction in the amount of ergosterol. The results also showed that the presence and position of different substituents on the phenyl ring of the acylhydrazone pendant seem to play a role on the antifungal activity as well as in deciding the fungistatic and fungicidal nature of the compounds.

Substituent effif ects on hydrogen bonding in Watson-Crick base pairs. A theoretical study

NARCIS (Netherlands)

Fonseca Guerra, C.; van der Wijst, T.; Bickelhaupt, F.M.

2005-01-01

We have theoretically analyzed Watson-Crick AT and GC base pairs in which purine C8 and/or pyrimidine C6 positions carry a substituent X = H, F, Cl or Br, using the generalized gradient approximation (GGA) of density functional theory at BP86/TZ2P. The purpose is to study the effects on structure

Surgical Management of Bulky Mediastinal Metastases in Follicular Thyroid Carcinoma

Directory of Open Access Journals (Sweden)

Zainal Adwin

2016-01-01

Full Text Available Follicular thyroid adenoma and carcinoma are very common. Benign and malignant lesions are usually indistinguishable from cytology alone and often require confirmatory resection. The spread of follicular carcinoma is usually hematogenous and is treated with surgery and adjuvant radioactive iodine. Very rarely, metastases occur in the mediastinum. Patients usually present with severe compressive symptoms. With proper treatment and follow-up, the prognosis for these type of thyroid malignancies is excellent. In the case presented here, our patient presented to the Universiti Kebangsaan Malaysia Medical Center with a progressively enlarging anterior neck swelling. The swelling had started 10 years before his presentation. We diagnosed him with an advanced thyroid malignancy with bulky mediastinal metastases. After extensive investigations and counseling, we chose to treat the patient with tumor excision and mediastinal metastases resection. Typically, mediastinal resection involves the removal of the sternum and use of an acrylic implant to recreate the sternum. In this case, the sternum and ribs were removed with subsequent myocutaneous flap coverage for the wound defect. Our experience represents an alternative treatment option in cases where implant use is unsuitable.

Grizzly bear

Science.gov (United States)

Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

2003-01-01

The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

Evaluation of achiral templates with fluxional Brønsted basic substituents in enantioselective conjugate additions.

Science.gov (United States)

Adachi, Shinya; Takeda, Norihiko; Sibi, Mukund P

2014-12-19

Enantioselective conjugate addition of malononitrile to pyrazolidinone-derived enoates proceeds in excellent yields and high enantioselectivities. A comparison of fluxional substituents with and without a Brønsted basic site and their impact on selectivity is detailed. Molecular sieves as an additive were found to be essential to achieve high enantioselectivity.

Direct access to highly crystalline mesoporous nano TiO2 using sterically bulky organic acid templates

Science.gov (United States)

Bakre, Pratibha V.; Tilve, S. G.

2018-05-01

Sterically bulky monocarboxylic acid templates pivalic acid and phenoxyacetic acid are reported for the first time as organic templates in the sol-gel synthesis of TiO2. Mesoporous nanoparticulates of pure anatase phase and of well defined size were synthesized. The characterization of the materials prepared was done by various methods such as XRD, SEM, TEM, FTIR, UV-DRS, BET, etc. The prepared TiO2 samples were evaluated for the day light photodegradation of methylene blue by comparing with Degussa P25 and templates free synthesized TiO2 and were found to be more efficient.

DFT studies of the substituent effects of dimethylamino on non-heme active oxidizing species: iron(V)-oxo species or iron(IV)-oxo acetate aminopyridine cation radical species?

Science.gov (United States)

Wang, Fang; Sun, Wei; Xia, Chungu; Wang, Yong

2017-10-01

Through the introduction of dimethylamino (Me 2 N) substituent at the pyridine ring of 2-((R)-2-[(R)-1-(pyridine-2-ylmethyl)pyrrolidin-2-yl]pyrrolidin-1-ylmethyl)pyridine (PDP) ligand, the non-heme Fe II ( Me2N PDP)/H 2 O 2 /AcOH catalyst system was found to exhibit significant higher catalytic activity and enantioselectivity than the non-substituent one in the asymmetric epoxidation experiments. The mechanistic origin of the remarkable substituent effects in these oxidation reactions has not been well established. To ascertain the potent oxidant and the related reaction mechanism, a detailed DFT calculation was performed. Interestingly, a novel Fe(IV)-oxo Me2N PDP cation radical species, [( Me2N PDP) + · Fe IV (O)(OAc)] 2+ ( Me2N 5), with about one spin spreading over the non-heme Me2N PDP ligand was formed via a carboxylic-acid-assisted O-O bond heterolysis, which is reminiscent of Compound I (an Fe(IV)(O)(porphyrin cation radical) species) in cytochrome P450 chemistry. Me2N 5 is energetically comparable with the cyclic ferric peracetate species Me2N 6, while in the pristine Fe(PDP) catalyst system, H 6 is more stable than H 5. Comparison of the activation energy for the ethylene epoxidation promoted by Me2N 5 and Me2N 6, Me2N 5 is supposed as the true oxidant triggering the epoxidation of olefins. In addition, a systematic research on the substituent effects varied from the electron-donating substituent (dMM, the substituents at sites 3, 4, and 5 of the pyridine ring: methyl, methoxyl, and methyl) to the electron-withdrawing one (CF 3 , 2,6-bis(trifluoromethyl)phenyl) on the electronic structure of the reaction intermediates has also been investigated. An alternative cyclic ferric peracetate complex is obtained, indicating that the substituents at the pyridine ring of PDP ligands have significant impacts on the electronic structure of the oxidants.

Substituent effects on the redox states of locally functionalized single-walled carbon nanotubes revealed by in situ photoluminescence spectroelectrochemistry.

Science.gov (United States)

Shiraishi, Tomonari; Shiraki, Tomohiro; Nakashima, Naotoshi

2017-11-09

Single-walled carbon nanotubes (SWNTs) with local chemical modification have been recognized as a novel near infrared (NIR) photoluminescent nanomaterial due to the emergence of a new red-shifted photoluminescence (PL) with enhanced quantum yields. As a characteristic feature of the locally functionalized SWNTs (lf-SWNTs), PL wavelength changes occur with the structural dependence of the substituent structures in the modified aryl groups, showing up to a 60 nm peak shift according to an electronic property difference of the aryl groups. Up to now, however, the structural effect on the electronic states of the lf-SWNTs has been discussed only on the basis of theoretical calculations due to the very limited amount of modifications. Herein, we describe the successfully-determined electronic states of the aryl-modified lf-SWNTs with different substituents (Ar-X SWNTs) using an in situ PL spectroelectrochemical method based on electrochemical quenching of the PL intensities analyzed by the Nernst equation. In particular, we reveal that the local functionalization of (6,5)SWNTs induced potential changes in the energy levels of the HOMO and the LUMO by -23 to -38 meV and +20 to +22 meV, respectively, compared to those of the pristine SWNTs, which generates exciton trapping sites with narrower band gaps. Moreover, the HOMO levels of the Ar-X SWNTs specifically shift in a negative potential direction by 15 meV according to an enhancement of the electron-accepting property of the substituents in the aryl groups that corresponds to an increase in the Hammet substituent constants, suggesting the importance of the dipole effect from the aryl groups on the lf-SWNTs to the level shift of the frontier orbitals. Our method is a promising way to characterize the electronic features of the lf-SWNTs.

Novel Bradykinin Analogues Modified in the N-Terminal Part of the Molecule with a Variety of Acyl Substituents

Czech Academy of Sciences Publication Activity Database

Sleszynska, M.; Wierzba, T. H.; Malinowski, K.; Tůmová, Tereza; Lammek, B.; Slaninová, Jiřina; Prahl, A.

2012-01-01

Roč. 18, č. 2 (2012), s. 117-124 ISSN 1573-3149 Institutional research plan: CEZ:AV0Z40550506 Keywords : bradykinin analogues * B-2 receptor antagonists * bulky acyl groups * in vivo rat blood pressure test * in vitro rat uterus test Subject RIV: CE - Biochemistry Impact factor: 1.280, year: 2012

Syntheses of cytotoxic novel arctigenin derivatives bearing halogen and alkyl groups on aromatic rings.

Science.gov (United States)

Yamauchi, Satoshi; Wukirsari, Tuti; Ochi, Yoshiaki; Nishiwaki, Hisashi; Nishi, Kosuke; Sugahara, Takuya; Akiyama, Koichi; Kishida, Taro

2017-09-01

The new lignano-9,9'-lactones (α,β-dibenzyl-γ-butyrolactone lignans), which showed the higher cytotoxicity than arctigenin, were synthesized. The well-known cytotoxic arctigenin showed activity against HL-60 cells (EC 50 =12μM), however, it was inactive against HeLa cells (EC 50 >100μM). The synthesized (3,4-dichloro, 2'-butoxy)-derivative 55 and (3,4-dichloro, 4'-butyl)-derivative 66 bearing the lignano-9,9'-lactone structures showed the EC 50 values of 10μM and 9.4μM against HL-60 cells, respectively. Against HeLa cells, the EC 50 value of the derivative 66 was 27μM. By comparing the activities with the corresponding 9,9'-epoxy structure (tetrahydrofuran compounds), the importance of the lactone structure of 55 and 66 for the higher activities was shown. The substituents on the aromatic ring of the lignano-9,9'-lactones affected the cytotoxicity level, observing more than 10-fold difference. Copyright © 2017. Published by Elsevier Ltd.

77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

Science.gov (United States)

2012-11-26

... Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of..., 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and Black Bear Development Holdings, LLC and Black Bear SO, LLC (transferees) filed an application for the partial the transfer of licenses...

Effect of Polyhedral Oligomeric Silsesquioxane (POSS) Substituents on the Rheological Behavior in Butyl Methacrylate/POSS Copolymers

Science.gov (United States)

2008-10-27

was repeated twice, dissolving the product in chloroform and diethyl ether, respectively. The polymer was dried at 60 °C under vacuum overnight...the Tg of the i Bu remains the same. Table 1. Tg for Butyl Methacrylate-co- Propyl Methacryl POSS Polymers with Various POSS Substituents

Phylogeography of mitochondrial DNA variation in brown bears and polar bears.

Science.gov (United States)

Shields, G F; Adams, D; Garner, G; Labelle, M; Pietsch, J; Ramsay, M; Schwartz, C; Titus, K; Williamson, S

2000-05-01

We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples. Copyright 2000 Academic Press.

Phylogeography of mitochondrial DNA variation in brown bears and polar bears

Science.gov (United States)

Shields, Gerald F.; Adams, Deborah; Garner, Gerald W.; Labelle, Martine; Pietsch, Jacy; Ramsay, Malcolm; Schwartz, Charles; Titus, Kimberly; Williamson, Scott

2000-01-01

We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples.

Preoperative Concurrent Radiation Therapy and Chemotherapy for Bulky Stage IB2, IIA, and IIB Carcinoma of the Uterine Cervix With Proximal Parametrial Invasion

International Nuclear Information System (INIS)

Huguet, Florence; Cojocariu, Oana-Maria; Levy, Pierre; Lefranc, Jean-Pierre; Darai, Emile; Jannet, Denis; Ansquer, Yan; Lhuillier, Pierre-Eugene; Benifla, Jean-Louis; Seince, Nathalie; Touboul, Emmanuel

2008-01-01

Purpose: To evaluate toxicity, local tumor control, and survival after preoperative chemoradiation for operable bulky cervical carcinoma. Methods and Materials: Between December 1991 and July 2006, 92 patients with operable bulky stage IB2, IIA, and IIB cervical carcinoma without pelvic or para-aortic nodes on pretreatment imaging were treated. Treatment consisted of preoperative external beam pelvic radiation therapy (EBRT) and concomitant chemotherapy (CT) during the first and fourth weeks of radiation combining 5-fluorouracil and cisplatin. The pelvic radiation dose was 40.5 Gy over 4.5 weeks. EBRT was followed by low-dose rate uterovaginal brachytherapy with a total dose of 20 Gy in 62 patients. After a median rest period of 44 days, all patients underwent Class II modified radical hysterectomy with bilateral pelvic lymphadenectomy. Thirty patients who had not received preoperative uterovaginal brachytherapy underwent postoperative low-dose-rate vaginal brachytherapy at a dose of 20 Gy. The mean follow-up was 46 months. Results: Pathologic residual tumor was observed in 43 patients. After multivariate analysis, additional preoperative uterovaginal brachytherapy was the single significant predictive factor for pathologic complete response rate (p = 0.019). The 2- and 5-year disease-free survival (DFS) rates were 80.4% and 72.2%, respectively. Pathologic residual cervical tumor was the single independent factor decreasing the probability of DFS (p = 0.020). Acute toxicities were moderate. Two severe ureteral complications requiring surgical intervention were observed. Conclusions: Concomitant chemoradiation followed by surgery for operable bulky stage I-II cervical carcinoma without clinical lymph node involvement can be used with acceptable toxicity. Pathologic complete response increases the probability of DFS

Substituent and structural effects on the kinetics of the reaction of N-(substituted phenylmethylene-m- and -p-aminobenzoic acids with diazodiphenylmethane

Directory of Open Access Journals (Sweden)

BRATISLAV Z. JOVANOVIC

2007-12-01

Full Text Available The rate constants for the reaction of twenty-two N-(substituted phenyl methylene-m- and -p-aminobenzoic acids with diazodiphenylmethane were determined in absolute ethanol at 30 °C. The effects of substituents on the reactivity of the investigated compounds were interpreted by correlation of the rate constants with LFER equations. The results of quantum mechanical calculations of the mole cular structure together with experimental results gave a better insight into the effects of structure on the transmission of electronic effects of the substituents. New σ constants for substituted benzylideneamino group were calculated.

Catharanthine C16 substituent effects on the biomimetic coupling with vindoline: preparation and evaluation of a key series of vinblastine analogues

Science.gov (United States)

Tam, Annie; Gotoh, Hiroaki; Robertson, William M.; Boger, Dale L.

2010-01-01

The examination of the catharanthine C16 substituent effects on the Fe(III)-promoted biomimetic coupling reaction with vindoline is detailed, confirming the importance of the presence of a C16 electron-withdrawing substituent, and establishing an unanticipated unique role (>10-fold) that the C16 methyl ester plays in the expression of the natural product properties. Thus, replacement of the vinblastine C16′ methyl ester with an ethyl ester (10-fold), a cyano group (100-fold), an aldehyde (100-fold), a hydroxymethyl group (1000-fold), or a primary carboxamide (>1000-fold) led to surprisingly large reductions in cytotoxic activity. PMID:20932748

Introgressive hybridization: brown bears as vectors for polar bear alleles.

Science.gov (United States)

Hailer, Frank

2015-03-01

The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

Complexation of imidazopyridine-based cations with a 24-crown-8 ether host: [2]pseudorotaxane and partially threaded structures.

Science.gov (United States)

Moreno-Olivares, Surisadai I; Cervantes, Ruy; Tiburcio, Jorge

2013-11-01

A new series of linear molecules derived from 1,2-bis(imidazopyridin-2-yl)ethane can fully or partially penetrate the cavity of the dibenzo-24-crown-8 macrocycle to produce a new family of host-guest complexes. Protonation or alkylation of the nitrogen atoms on the pyridine rings led to an increase in the guest total positive charge up to 4+ and simultaneously generated two new recognition sites (pyridinium motifs) that are in competition with the 1,2-bis(benzimidazole)ethane motif for the crown ether. The relative position of the pyridine ring and the chemical nature of the N-substituent determined the preferred motif and the host-guest complex geometry: (i) for linear guests with relatively bulky groups (i.e., a benzyl substituent), the 1,2-bis(benzimidazole)ethane motif is favored, leading to a fully threaded complex with a [2]pseudorotaxane geometry; (ii) for small substituents, such as -H and -CH3 groups, regardless of the guest shape, the pyridinium motifs are preferred, leading to external partially threaded complexes in a 2:1 host to guest stoichiometry.

Aryl- and heteroaryl-substituted aminobenzo[a]quinolizines as dipeptidyl peptidase IV inhibitors.

Science.gov (United States)

Boehringer, Markus; Fischer, Holger; Hennig, Michael; Hunziker, Daniel; Huwyler, Joerg; Kuhn, Bernd; Loeffler, Bernd M; Luebbers, Thomas; Mattei, Patrizio; Narquizian, Robert; Sebokova, Elena; Sprecher, Urs; Wessel, Hans Peter

2010-02-01

Synthesis and SAR are described for a structurally distinct class of DPP-IV inhibitors based on aminobenzo[a]quinolizines bearing (hetero-)aromatic substituents in the S1 specificity pocket. The m-(fluoromethyl)-phenyl derivative (S,S,S)-2g possesses the best fit in the S1 pocket. However, (S,S,S)-2i, bearing a more hydrophilic 5-methyl-pyridin-2-yl residue as substituent for the S1 pocket, displays excellent in vivo activity and superior drug-like properties. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Synthesis of sn-1 functionalized phospholipids as substrates for secretory phospholipase A₂

DEFF Research Database (Denmark)

Linderoth, Lars; Peters, Günther H.J.; Jørgensen, K.

2007-01-01

Secretory phospholipase A2 (sPLA2) represents a family of small water-soluble enzymes that catalyze the hydrolysis of phospholipids in the sn-2 position liberating free fatty acids and lysophospholipids. Herein we report the synthesis of two new phospholipids (1 and 2) with bulky allyl-substituen......Secretory phospholipase A2 (sPLA2) represents a family of small water-soluble enzymes that catalyze the hydrolysis of phospholipids in the sn-2 position liberating free fatty acids and lysophospholipids. Herein we report the synthesis of two new phospholipids (1 and 2) with bulky allyl...... of the allyl-substituents by a zinc mediated allylation. Small unilamellar liposomes composed of phospholipids 1 and 2 were subjected to sPLA2 activity measurements. Our results show that only phospholipid 1 is hydrolyzed by the enzyme. Molecular dynamics simulations revealed that the lack of hydrolysis...

Superoxide radical-mediated photocatalytic oxidation of phenolic compounds over Ag"+/TiO_2: Influence of electron donating and withdrawing substituents

International Nuclear Information System (INIS)

Xiao, Jiadong; Xie, Yongbing; Han, Qingzhen; Cao, Hongbin; Wang, Yujiao; Nawaz, Faheem; Duan, Feng

2016-01-01

Highlights: • A weak EWG benefited photocatalytic oxidation of phenols the most. • Phenolic compounds were dominantly oxidized by ·O_2"−, rather than ·OH, "1O_2 or h"+. • ·O_2"− preferred to nucleophilically attack EDG substituted phenols. • ·O_2"− more likely electrophilically attacked EWG substituted phenols. • ·O_2"− simultaneously nucleophilically and electrophilically assaulted p-chlorophenol. - Abstract: A comparative study was constructed to correlate the electronic property of the substituents with the degradation rates of phenolic compounds and their oxidation pathways under UV with Ag"+/TiO_2 suspensions. It was verified that a weak electron withdrawing substituent benefited photocatalytic oxidation the most, while an adverse impact appeared when a substituent was present with stronger electron donating or withdrawing ability. The addition of p-benzoquinone dramatically blocked the degradation, confirming superoxide radicals (·O_2"−) as the dominant photooxidant, rather than hydroxyl radicals, singlet oxygen or positive holes, which was also independent of the substituent. Hammett relationship was established based on pseudo-first-order reaction kinetics, and it revealed two disparate reaction patterns between ·O_2"− and phenolic compounds, which was further verified by the quantum chemical computation on the frontier molecular orbitals and Mulliken charge distributions of ·O_2"− and phenolic compounds. It was found that electron donating group (EDG) substituted phenols were more likely nucleophilically attacked by ·O_2"−, while ·O_2"− preferred to electrophilically assault electron withdrawing group (EWG) substituted phenols. Exceptionally, electrophilic and nucleophilic attack by ·O_2"− could simultaneously occur in p-chlorophenol degradation, consequently leading to its highest rate constant. Possible reactive positions on the phenolic compounds were also detailedly uncovered.

Structural Diversity in Alkali Metal and Alkali Metal Magnesiate Chemistry of the Bulky 2,6-Diisopropyl-N-(trimethylsilyl)anilino Ligand.

Science.gov (United States)

Fuentes, M Ángeles; Zabala, Andoni; Kennedy, Alan R; Mulvey, Robert E

2016-10-10

Bulky amido ligands are precious in s-block chemistry, since they can implant complementary strong basic and weak nucleophilic properties within compounds. Recent work has shown the pivotal importance of the base structure with enhancement of basicity and extraordinary regioselectivities possible for cyclic alkali metal magnesiates containing mixed n-butyl/amido ligand sets. This work advances alkali metal and alkali metal magnesiate chemistry of the bulky arylsilyl amido ligand [N(SiMe 3 )(Dipp)] - (Dipp=2,6-iPr 2 -C 6 H 3 ). Infinite chain structures of the parent sodium and potassium amides are disclosed, adding to the few known crystallographically characterised unsolvated s-block metal amides. Solvation by N,N,N',N'',N''-pentamethyldiethylenetriamine (PMDETA) or N,N,N',N'-tetramethylethylenediamine (TMEDA) gives molecular variants of the lithium and sodium amides; whereas for potassium, PMDETA gives a molecular structure, TMEDA affords a novel, hemi-solvated infinite chain. Crystal structures of the first magnesiate examples of this amide in [MMg{N(SiMe 3 )(Dipp)} 2 (μ-nBu)] ∞ (M=Na or K) are also revealed, though these breakdown to their homometallic components in donor solvents as revealed through NMR and DOSY studies. © 2016 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

A Successful Attempt to Obtain the Linear Dependence Between One-Photon and Two-Photon Spectral Properties and Hammett Parameters of Various Aromatic Substituents in New π-Extended Asymmetric Organic Chromophores.

Science.gov (United States)

Hu, Nvdan; Gong, Yulong; Wang, Xinchao; Lu, Yao; Peng, Guangyue; Yang, Long; Zhang, Shengtao; Luo, Ziping; Li, Hongru; Gao, Fang

2015-11-01

A series of new asymmetric chromophores containing aromatic substituents and possessing the excellent π-extension in space were prepared through multi-steps routes. One-photon and two-photon spectral properties of these new chromophores could be tuned by these substituents finely and simultaneously. The linear correlation of the wave numbers of the one-photon absorption and emission maxima to Hammett parameters of these substituents was presented. Near infrared two-photon absorption emission integrated areas of the target chromophores were correlated linearly to Hammett constants of these substituted groups.

Conformational Changes Allow Processing of Bulky Substrates by a Haloalkane Dehalogenase with a Small and Buried Active Site.

Science.gov (United States)

Kokkonen, Piia; Bednar, David; Dockalova, Veronika; Prokop, Zbynek; Damborsky, Jiri

2018-06-01

Haloalkane dehalogenases catalyze the hydrolysis of halogen-carbon bonds in organic halogenated compounds and as such are of great utility as biocatalysts. The crystal structures of the haloalkane dehalogenase DhlA from the bacterium from Xanthobacter autotrophicus GJ10, specifically adapted for the conversion of the small 1,2-dichloroethane (DCE) molecule, display the smallest catalytic site (110 Å3) within this enzyme family. However, during a substrate-specificity screening, we noted that DhlA can catalyze the conversion of far bulkier substrates, such as the 4-(bromomethyl)-6,7-dimethoxy-coumarin (220 Å3). This large substrate cannot bind to DhlA without conformational alterations. These conformational changes have been previously inferred from kinetic analysis, but their structural basis has not been understood. Using molecular dynamic simulations, we demonstrate here the intrinsic flexibility of part of the cap domain that allows DhlA to accommodate bulky substrates. The simulations displayed two routes for transport of substrates to the active site, one of which requires the conformational change and which is likely the route for bulky substrates. These results provide insights into the structure-dynamics-function relationships in enzymes with deeply buried active sites. Moreover, understanding the structural basis for the molecular adaptation of DhlA to DCE introduced into the biosphere during the industrial revolution provides a valuable lesson in enzyme design by nature. Published under license by The American Society for Biochemistry and Molecular Biology, Inc.

Amides with nitrogenous heterocyclic substituent, their manufacturing process and their use to draw out selectively Actinium series (III) and to separate them in particular from Lanthanides (III)

International Nuclear Information System (INIS)

Cuillerdier, C.; Musikas, C.

1993-01-01

Present invention is concerned with new amides with nitrogenous heterocyclic substituent utilizable to separate trivalent actinium series from trivalent lanthanides. In these molecules, it is possible to obtain particularly covalent liaison which has more affinity with 5f series, that is to say actinium series; included a manufacturing process for these amides with nitrogenous heterocyclic substituent

Acylated 2-(N-arylaminomethylene)benzo[b]thiophene-3(2H)-Ones: Molecular Switches with Varying Migrants and Substituents

International Nuclear Information System (INIS)

Dubonosov, A.D.; Rybalkin, V.P.; Tsukanov, A.V.; Minkin, V.I.; Popova, L.L.; Revinsky, Y.V.; Bren, V.A.; Minkin, V.I.

2009-01-01

Synthesis and properties of photo chromic acylated 2-(N-arylaminomethylene)benzo[b]thiophene-3(2H)-ones are described. Their structure largely depends on the nature of acyl migrant and in a less degree on N-aryl substituent.

Influence of different amino substituents in position 1 and 4 on spectroscopic and acid base properties of 9,10-anthraquinone moiety.

Science.gov (United States)

Wcisło, Anna; Niedziałkowski, Paweł; Wnuk, Elżbieta; Zarzeczańska, Dorota; Ossowski, Tadeusz

2013-05-01

A series of novel 1-amino and 1,4-diamino-9,10-anthraquinones, substituted with different alkyl groups, were synthesized as the result of alkylation with amino substituents. All the obtained aminoanthraquinone derivatives were characterized by NMR, IR spectroscopy and mass spectrometry. The spectroscopic properties of these compounds were determined by using UV-Vis spectroscopy in acetonitrile, and in the mixture of acetonitrile and methanol at different pH ranges. The effects of various substituents present in the newly developed anthraquinone derivatives and their ability to form hydrogen bonds between the carbonyl oxygen atom of anthraquinone moiety and nitrogen atom of N-H group in 1-aminoanthraquinone (1-AAQ) and 1,4-diaminoanthraquinone (1,4-DAAQ) were studied. Additionally, the effects of hydrogen bond formation between O-H group in hydroxyethylamino substituent and the carbonyl oxygen atom of anthraquinone were investigated. The spectroscopic behavior of the studied derivatives strongly depended on the solvent-solute interactions and the nature of solvent. The values of pKa for the new anthraquinones were determined by the combined potentiometric and spectrophotometric titration methods. Copyright © 2013 Elsevier B.V. All rights reserved.

Synthesis of some fenchyl-substituted alkenes and enol-ethers containing 3-oxyphenyl substituents by the Barton-Kellogg reaction

International Nuclear Information System (INIS)

Ciscato, Luiz Francisco M.L.; Bartoloni, Fernando H.; Baader, Wilhelm Josef; Bastos, Erick L.; Guenther, Wolfgang; Weiss, Dieter; Beckert, Rainer

2010-01-01

The synthesis of one fenchyl-substituted alkene and two enol-ethers, containing 3-oxyphenyl substituents by the Barton-Kellogg reaction is described. The tri-substituted aromatic fenchylalkene 1a was prepared in 53% yield from thiofenchone and a diazoanisole; whereas enol-ethers 1b and 1c were obtained (95 and 75% yield, respectively) using an inverse approach based on diazofenchone and aromatic thionoesters. A mixture of Z and E isomers was obtained in all cases; isomer attribution and quantification has been carried out by analysis of NMR spectroscopic data assisted by theoretical calculations (E/Z ratio: 1a = 0.72, 1b = 2.2, 1c = 1.8). Reaction proceeds with low stereoselectivity leading to the preferential formation of diastereoisomeric olefins and enol-ethers where the aromatic substituent resides at the side of the two fenchyl methyl groups. (author)

Synthesis of some fenchyl-substituted alkenes and enol-ethers containing 3-oxyphenyl substituents by the Barton-Kellogg reaction

Energy Technology Data Exchange (ETDEWEB)

Ciscato, Luiz Francisco M.L.; Bartoloni, Fernando H.; Baader, Wilhelm Josef, E-mail: wjbaader@iq.usp.b [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Quimica. Dept. de Quimica Fundamental; Bastos, Erick L. [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Centro de Ciencias Naturais e Humanas; Guenther, Wolfgang; Weiss, Dieter; Beckert, Rainer [Friedrich-Schiller Universitaet Jena (Germany). Institut fuer Organische Chemie und Makromolekulare Chemie

2010-07-01

The synthesis of one fenchyl-substituted alkene and two enol-ethers, containing 3-oxyphenyl substituents by the Barton-Kellogg reaction is described. The tri-substituted aromatic fenchylalkene 1a was prepared in 53% yield from thiofenchone and a diazoanisole; whereas enol-ethers 1b and 1c were obtained (95 and 75% yield, respectively) using an inverse approach based on diazofenchone and aromatic thionoesters. A mixture of Z and E isomers was obtained in all cases; isomer attribution and quantification has been carried out by analysis of NMR spectroscopic data assisted by theoretical calculations (E/Z ratio: 1a = 0.72, 1b = 2.2, 1c = 1.8). Reaction proceeds with low stereoselectivity leading to the preferential formation of diastereoisomeric olefins and enol-ethers where the aromatic substituent resides at the side of the two fenchyl methyl groups. (author)

Substituent and solvent effects on spectroscopic properties of 2-amino-1,3-dicyano-5,6,7,8-tetrahydronaphthalene derivatives

International Nuclear Information System (INIS)

Józefowicz, M.; Bajorek, A.; Pietrzak, M.; Heldt, J.R.; Heldt, J.

2014-01-01

In this article, we report the photophysical properties of six, newly synthesized donor-substituted 2-amino-1,3-dicyano-5,6,7,8-tetrahydronaphthalene fluorophores. The steady-state and time-resolved spectroscopic experiments have been used to investigate the substituent and solvent effects on the locally excited (LE) and intramolecular charge transfer (ICT) emission. We demonstrate that the spectroscopic characteristics (fluorescence quantum yields, fluorescence decay times, radiative rate constants, and ground and excited state dipole moments) of the studied D–A dyes, as well as the reorganization energies characterizing the solute–solvent interactions and intramolecular torsion motions greatly depend on different substituents and microenvironment. On the basis of the experimental results and our previous quantum-chemical calculations, it was shown that two emitting charge transfer states: non-relaxed (ICT) NR and relaxed (ICT) R exist in six biphenyl derivatives dissolved in polar solvents (e.g., THF), whereas in non-polar medium (MCH) the existence of two emissive states have been attributed to non-relaxed and relaxed, locally excited state ((LE) NR , (LE) R ). - Highlights: • Spectroscopic properties greatly depend on different substituents and microenvironment. • Investigated dyes form a typically spectrally inhomogeneous system. • Two emitting charge transfer states (ICT) NR and (ICT) R exist in polar solvents. • In non-polar medium locally excited fluorescence is possible from (LE) NR and (LE) R states

EcoBears

DEFF Research Database (Denmark)

Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

2015-01-01

In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

Science.gov (United States)

Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

2012-01-01

We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics.

Science.gov (United States)

Tse, Peter W; Wang, Dong

2017-02-14

Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL). Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI) so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

Directory of Open Access Journals (Sweden)

Peter W. Tse

2017-02-01

Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

Comparison of Alignment Correction Angles Between Fixed-Bearing and Mobile-Bearing UKA.

Science.gov (United States)

Inoue, Atsuo; Arai, Yuji; Nakagawa, Shuji; Inoue, Hiroaki; Yamazoe, Shoichi; Kubo, Toshikazu

2016-01-01

Good outcomes have been reported with both fixed-bearing and mobile-bearing unicompartmental knee arthroplasty (UKA). However, overcorrected alignment could induce the progression of arthritis on the non-arthroplasty side. Changes of limb alignment after UKA with both types of bearings (fixed bearing: 24 knees, mobile bearing: 28 knees) were investigated. The mean difference between the preoperative standing femoral-tibial angle (FTA) and postoperative standing FTA was significantly larger in mobile bearing UKA group. In fixed-bearing UKA, there must be some laxity in MCL tension so that a 2-mm tension gauge can be inserted. In mobile-bearing UKA, appropriate MCL tension is needed to prevent bearing dislocation. This difference in MCL tension may have caused the difference in the correction angle between the groups. Copyright © 2016 Elsevier Inc. All rights reserved.

The unexpected influence of aryl substituents in N-aryl-3-oxobutanamides on the behavior of their multicomponent reactions with 5-amino-3-methylisoxazole and salicylaldehyde

Directory of Open Access Journals (Sweden)

Volodymyr V. Tkachenko

2014-12-01

Full Text Available The switchable three-component reactions of 5-amino-3-methylisoxazole, salicylaldehyde and N-aryl-3-oxobutanamides under different conditions were studied and discussed. The unexpected influence of the aryl substituent in N-aryl-3-oxobutanamides on the behavior of the reaction was discovered. The key influence of ultrasonication and Lewis acid catalysts led to an established protocol to selectively obtain two or three types of heterocyclic scaffolds depending on the substituent in the N-aryl moiety.

DNA bulky adducts in a Mediterranean population correlate with environmental ozone concentration, an indicator of photochemical smog.

Science.gov (United States)

Palli, Domenico; Saieva, Calogero; Grechi, Daniele; Masala, Giovanna; Zanna, Ines; Barbaro, Antongiulio; Decarli, Adriano; Munnia, Armelle; Peluso, Marco

2004-03-01

Ozone (O(3)), the major oxidant component in photochemical smog, mostly derives from photolysis of nitrogen dioxide. O(3) may have biologic effects directly and/or via free radicals reacting with other primary pollutants and has been reported to influence daily mortality and to increase lung cancer risk. Although DNA damage may be caused by ozone itself, only other photochemical reaction products (as oxidised polycyclic aromatic hydrocarbons) may form bulky DNA adducts, a reliable biomarker of genotoxic damage and cancer risk, showing a seasonal trend. In a large series consisting of 320 residents in the metropolitan area of Florence, Italy, enrolled in a prospective study for the period 1993-1998 (206 randomly sampled volunteers, 114 traffic-exposed workers), we investigated the correlation between individual levels of DNA bulky adducts and a cumulative O(3) exposure score. The average O(3) concentrations were calculated for different time windows (0-5 to 0-90 days) prior to blood drawing for each participant, based on daily measurements provided by the local monitoring system. Significant correlations between DNA adduct levels and O3 cumulative exposure scores in the last 2-8 weeks before enrollment emerged in never smokers. Correlations were highest in the subgroup of never smokers residing in the urban area and not occupationally exposed to vehicle traffic pollution, with peak values for average concentrations 4-6 weeks before enrollment (r = 0.34). Our current findings indicate that DNA adduct formation may be modulated by individual characteristics and by the cumulative exposure to environmental levels of ozone in the last 4-6 weeks, possibly through ozone-associated reactive pollutants. Copyright 2003 Wiley-Liss, Inc.

Electronic effects of substituents in o-hydroxyazo compounds and azoquinone-hydrazone tautomerism

International Nuclear Information System (INIS)

Raikhshtat, M.M.; Zhogina, V.V.; Savvin, S.B.

1987-01-01

The authors have investigated the electronic structure of p-substituted phenylazonaphthol and some o-hydroxyazo compounds of the general structure X-N=N-Y. The influence of structural changes of the X and Y radicals on the electronic structure of the o-hydroxyazo group was studied. The results are compared with experimental data, obtained by NMR 13 C, by tautomerism of these compounds in solution in CDCl 3 . The electronic structure of o-hydroxyazo compounds was calculated by the PPDP/2 method. This method satisfactorily describes the electronic structure of organic compounds and correctly reproduces electronic effects of the substituents

Acetylenes bearing Aromatic Terminal Groups. : II 13C-NMR Spectra of Monosubstituted Diphenylacetylenes

OpenAIRE

野本, 健雄; Nomoto, Takeo

1986-01-01

Six monosubstituted diphenylacetylenes, p-X-C6H4-C≡C-C6H5 1 (Ⅹ=NMe2, NH2, OMe, Cl, and NO2), were synthesized, and 13C-NMR spectra of their acetylenic carbons were measured. Hammett plots of the chemical shifts of the acetylenic α-13C and β-13C (against substituent constants σ) respectively showed a linear relationship, eXCept for β-13C on NMe2 and NH2 groups. The effects of substituents on 13C-Chemical shifts of diphenylacetylenes and effeciency of the C≡C bonds in transmitting the substitue...

Increased micronuclei and bulky DNA adducts in cord blood after maternal exposures to traffic-related air pollution

DEFF Research Database (Denmark)

Pedersen, M.; Wichmann, J.; Autrup, H.

2009-01-01

assessed through the use of validated biomarkers in blood cells from mother-newborn pairs. A cross-sectional biomonitoring study with healthy pregnant women living in the Greater Copenhagen area, Denmark, was conducted. Bulky DNA adducts and micronuclei (MN) were measured in blood from 75 women and 69...... levels were similar and positively correlated in maternal and cord blood (1.40 vs. 1.37 n/10(8) nucleotides; r = 0.99; p cells). Adduct levels were...... highest among mother-newborn pairs who lived near medium-traffic-density (> 400-2500 vehicle km/24 h; p 2500 vehicle km/24 h) were significantly increased (p = 0.02). This trend remained after adjusting...

Effects of para-substituents of styrene derivatives on their chemical reactivity on platinum nanoparticle surfaces

Science.gov (United States)

Hu, Peiguang; Chen, Limei; Deming, Christopher P.; Lu, Jia-En; Bonny, Lewis W.; Chen, Shaowei

2016-06-01

Stable platinum nanoparticles were successfully prepared by the self-assembly of para-substituted styrene derivatives onto the platinum surfaces as a result of platinum-catalyzed dehydrogenation and transformation of the vinyl groups to the acetylene ones, forming platinum-vinylidene/-acetylide interfacial bonds. Transmission electron microscopic measurements showed that the nanoparticles were well dispersed without apparent aggregation, suggesting sufficient protection of the nanoparticles by the organic capping ligands, and the average core diameter was estimated to be 2.0 +/- 0.3 nm, 1.3 +/- 0.2 nm, and 1.1 +/- 0.2 nm for the nanoparticles capped with 4-tert-butylstyrene, 4-methoxystyrene, and 4-(trifluoromethyl)styrene, respectively, as a result of the decreasing rate of dehydrogenation with the increasing Taft (polar) constant of the para-substituents. Importantly, the resulting nanoparticles exhibited unique photoluminescence, where an increase of the Hammett constant of the para-substituents corresponded to a blue-shift of the photoluminescence emission, suggesting an enlargement of the HOMO-LUMO band gap of the nanoparticle-bound acetylene moieties. Furthermore, the resulting nanoparticles exhibited apparent electrocatalytic activity towards oxygen reduction in acidic media, with the best performance among the series of samples observed with the 4-tert-butylstyrene-capped nanoparticles due to an optimal combination of the nanoparticle core size and ligand effects on the bonding interactions between platinum and oxygen species.Stable platinum nanoparticles were successfully prepared by the self-assembly of para-substituted styrene derivatives onto the platinum surfaces as a result of platinum-catalyzed dehydrogenation and transformation of the vinyl groups to the acetylene ones, forming platinum-vinylidene/-acetylide interfacial bonds. Transmission electron microscopic measurements showed that the nanoparticles were well dispersed without apparent

A review of bear farming and bear trade in Lao People's Democratic Republic

Directory of Open Access Journals (Sweden)

E. Livingstone

2018-01-01

Full Text Available This study reviews the bear farming industry in Lao PDR with the objective of documenting the current number of commercial bear facilities (i.e. captive bear facilities judged to be trading in bear bile and/or bears and bear parts and the number of bears contained within these facilities, noting changes since it was last examined between 2000 and 2012 by Livingstone and Shepherd (2014. We surveyed all known commercial bear facilities and searched for previously unrecorded facilities. We compared our records with Livingstone and Shepherd (2014 and corrected some duplicate records from their study. In 2017, we recorded seven commercial facilities; four dedicated bear farms, and three tiger farms that were reportedly also keeping bears. We found that between 2012 and 2017 the recorded number of dedicated bear farms reduced by two, and the recorded number of tiger farms also keeping bears increased by one. Within the same period, the total number of captive bears among all facilities in Lao PDR hardly changed (+one, but the number of bears within each facility did. The northern facilities, owned by ethnic Chinese, have expanded since 2012, and central and southern facilities have downsized or closed. While bear farming appears to be downsizing in Lao PDR overall, efforts to phase it out are undermined by the expansion of foreign owned facilities in the north, within Special and Specific Economic Zones that largely cater to a Chinese market, and where the Lao government's efforts to enforce laws and protect wildlife appear to be lacking. Closing the facilities in the north will require political will and decisive law enforcement. Keywords: Bear farms, Bear bile, Gall bladder, Urso-deoxycholic acid, Bear bile extraction facilities, Lao PDR, Ursus thibetanus

Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

Science.gov (United States)

Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

2014-01-01

We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears.

Supramolecular Switches Based on the Guanine–Cytosine (GC) Watson–Crick Pair: Effect of Neutral and Ionic Substituents

NARCIS (Netherlands)

Guerra, C.F.; van der Wijst, T.; Bickelhaupt, F.M.

2006-01-01

We have theoretically analyzed Watson–Crick guanine–cytosine (GC) base pairs in which purine-C8 and/or pyrimidine-C6 positions carry a substituent X = NH−, NH2, NH3+ (N series), O−, OH, or OH2+ (O series), using the generalized gradient approximation (GGA) of density functional theory at the

Teddy Bear Stories

DEFF Research Database (Denmark)

van Leeuwen, Theo; Caldas-Coulthardt, Carmen

2014-01-01

This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

“Bear-ly” learning: Limits of abstraction in black bear cognition

Directory of Open Access Journals (Sweden)

Jennifer Vonk

2018-02-01

Full Text Available We presented two American black bears (Ursus americanus with a serial list learning memory task, and one of the bears with a matching-to-sample task. After extended training, both bears demonstrated some success with the memory task but failed to generalize the overarching rule of the task to novel stimuli. Matching to sample proved even more difficult for our bear to learn. We conclude that, despite previous success in training bears to respond to natural categories, quantity discriminations, and other related tasks, that bears may possess a cognitive limitation with regards to learning abstract rules. Future tests using different procedures are necessary to determine whether this is a limit of bears’ cognitive capacities, or a limitation of the current tasks as presented. Future tests should present a larger number of varying stimuli. Ideally, bears of various species should be tested on these tasks to demonstrate species as well as individual differences.

A retrospective study of neoadjuvant chemotherapy plus radical hysterectomy versus radical hysterectomy alone in patients with stage II cervical squamous cell carcinoma presenting as a bulky mass

Directory of Open Access Journals (Sweden)

Takatori E

2016-09-01

Full Text Available Eriko Takatori, Tadahiro Shoji, Anna Takada, Takayuki Nagasawa, Hideo Omi, Masahiro Kagabu, Tatsuya Honda, Fumiharu Miura, Satoshi Takeuchi, Toru Sugiyama Department of Obstetrics and Gynecology, Iwate Medical University School of Medicine, Iwate, Japan Objective: In order to evaluate the usefulness of neoadjuvant chemotherapy (NAC for stage II cervical squamous cell carcinoma with a bulky mass, we retrospectively compared patients receiving NAC followed by radical hysterectomy (RH; NAC group with patients who underwent RH without NAC (Ope group. Patients and methods: The study period was from June 2002 to March 2014. The subjects were 28 patients with a stage II bulky mass in the NAC group and 17 such patients in the Ope group. The chi-square test was used to compare operative time, volume of intraoperative blood loss, use of blood transfusion, and time from surgery to discharge between the two groups. Moreover, the log-rank test using the Kaplan–Meier method was performed to compare disease-free survival (DFS and overall survival (OS between the groups. Results: There were no statistically significant differences between the two groups in operative time, volume of intraoperative blood loss, or use of blood transfusion. However, the time from surgery to discharge was 18 days (14–25 days in the NAC group and 25 days (21–34 days in the Ope group; the patients in the NAC group were discharged earlier (P=0.032. The hazard ratio for DFS in the NAC group as compared with that in the Ope group was 0.36 (95% CI 0.08–0.91, and the 3-year DFS rates were 81.2% and 41.0%, respectively (P=0.028. Moreover, the hazard ratio for OS was 0.39 (95% CI 0.11–1.24, and the 3-year OS rates were 82.3% and 66.4%, respectively (P=0.101. Conclusion: NAC with cisplatin and irinotecan was confirmed to prolong DFS as compared with RH alone. The results of this study suggest that NAC might be a useful adjunct to surgery in the treatment of stage II squamous

DFT study on the effect of exocyclic substituents on the proton affinity of 1-methylimidazole

International Nuclear Information System (INIS)

Liu, Haining; Bara, Jason E.; Turner, C. Heath

2013-01-01

Highlights: • DFT calculations are used to predict the proton affinity of 1-methylimidazoles. • The electron-withdrawing groups dominate the predicted proton affinity. • The effects of multiple substituents on the proton affinity can be accurately predicted. • Large compound libraries can be screened for imidazoles with tailored reactivity. - Abstract: A deeper understanding of the acid/base properties of imidazole derivatives will aid the development of solvents, polymer membranes and other materials that can be used for CO 2 capture and acid gas removal. In this study, we employ density functional theory calculations to investigate the effect of various electron-donating and electron-withdrawing groups on the proton affinity of 1-methylimidazole. We find that electron-donating groups are able to increase the proton affinity relative to 1-methylimidazole, i.e., making the molecule more basic. In contrast, electron-withdrawing groups cause a decrease of the proton affinity. When multiple substituents are present, their effects on the proton affinity were found to be additive. This finding offers a quick approach for predicting and targeting the proton affinities of this series of molecules, and we show the strong correlation between the calculated proton affinities and experimental pK a values

Photoelectron spectra and electronic structure of nitrogen analogues of boron β-diketonates with aromatic substituents

Energy Technology Data Exchange (ETDEWEB)

Tikhonov, Sergey A., E-mail: allser@bk.ru [Far Eastern Federal University, 8 Sukhanova St., Vladivostok, 690950 (Russian Federation); Vovna, Vitaliy I. [Far Eastern Federal University, 8 Sukhanova St., Vladivostok, 690950 (Russian Federation); Borisenko, Aleksandr V. [Vladivostok Branch of Russian Customs Academy, 16v Strelkovaya St., Vladivostok, 690034 (Russian Federation)

2016-11-15

Highlights: • The electronic structures of three nitrogen analogues of boron β-diketonates have been investigated. • UV photoelectron spectra have been interpreted. • The structure of the UV photoelectron spectra is in good agreement with the energies and compositions of Kohn-Sham orbitals. - Abstract: The electronic structure of three nitrogen analogoues of boron β-diketonates containing aromatic substituents was studied by the ultraviolet photoelectron spectroscopy and within the density functional theory. In order to determine effects of heteroatom substitution in the chelate ligand, a comparative analysis was carried out for the electronic structure of three model compounds. In a range of model compounds, the HOMO's nature was revealed to be the same. The HOMO-1 orbital of nitrogen containing compounds is determined by the presence of lone electron pairs of nitrogen. In a range of the complexes under study, the influence of aromatic substituents on the electronic structure was defined. In the imidoylamidinate complex, in contrast to formazanates and β-diketonates, it was found the absence of any noticeable mixing of π-orbitals of the chelate and benzene rings. It was shown that within energy range to 11 eV, the calculated results reproduce well the energy differences between the ionized states of complexes.

GAS BEARING

Science.gov (United States)

Skarstrom, C.W.

1960-09-01

A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

The Influence of Substituents on the Tautomerism of Symmetrically Substituted 2,2'-Bis-benzimidazoles

Directory of Open Access Journals (Sweden)

Dall'Oglio Evandro

2002-01-01

Full Text Available The tautomerism of five symmetrically substituted 2,2'-bis-benzimidazoles [5(6,5'(6'-tetramethyl- (1; 5(6,5'(6'-dimethyl-(2; 5(6,5'(6'-dichloro- (3; 5(6,5'(6'-dimethoxy- (4 and 4(7,4'(7'-dimethyl-2,2'-bis-benzimidazole (5], was studied by means of ¹H NMR spectroscopy at variable temperatures, and the influence of the substituents on the energy barriers for tautomeric interconversion was interpreted with the aid of theoretical calculations.

Substituent-directed structural and physicochemical controls of diruthenium catecholate complexes with ligand-unsupported Ru-Ru bonds.

Science.gov (United States)

Chang, Ho-Chol; Mochizuki, Katsunori; Kitagawa, Susumu

2005-05-30

A family of diruthenium complexes with ligand-unsupported Ru-Ru bonds has been systematically synthesized, and their crystal structures and physical properties have been examined. A simple, useful reaction between Ru2(OAc)4Cl (OAc- = acetate) and catechol derivatives in the presence of bases afforded a variety of diruthenium complexes, generally formulated as [Na(n){Ru2(R4Cat)4}] (n = 2 or 3; R4 = -F4, -Cl4, -Br4, -H4, -3,5-di-t-Bu, and -3,6-di-t-Bu; Cat(2-) = catecholate). The most characteristic feature of the complexes is the formation of short ligand-unsupported Ru-Ru bonds (2.140-2.273 A). These comprehensive studies were carried out to evaluate the effects of the oxidation states and the substituents governing the molecular structures and physicochemical properties. The Ru-Ru bond distances, rotational conformations, and bending structures of the complexes were successfully varied. The results presented in this manuscript clearly demonstrate that the complexes with ligand-unsupported Ru-Ru bonds can sensitively respond to redox reactions and ligand substituents on the basis of the greater degree of freedom in their molecular structures.

Substituent Effects Dehalogenation of Aryl Bromides with NaAlH2(OCH2CH2OCH3)2

Czech Academy of Sciences Publication Activity Database

Czakoová, Marie; Hetflejš, Jiří; Včelák, Jaroslav

2001-01-01

Roč. 72, č. 2 (2001), s. 277-287 ISSN 0133-1736 R&D Projects: GA ČR GA203/97/1173 Institutional research plan: CEZ:AV0Z4072921 Keywords : substituent effects * aryl bromides * Co-assisted debromination Subject RIV: CC - Organic Chemistry Impact factor: 0.475, year: 2001

Synthesis and Crystal Structures of Dimethylsilylene-Bridged (Amidocyclopentadienyl)Dichlorotitanium(IV) Complexes with Various Substituents on the Cyclopentadienyl Ligand

Czech Academy of Sciences Publication Activity Database

Zemánek, Jaroslav; Štěpnička, P.; Fejfarová, K.; Gyepes, R.; Císařová, I.; Horáček, Michal; Kubišta, Jiří; Varga, V.; Mach, Karel

2001-01-01

Roč. 66, č. 4 (2001), s. 605-620 ISSN 0010-0765 R&D Projects: GA AV ČR IBS4040017 Institutional research plan: CEZ:AV0Z4040901 Keywords : titanium * (amidocyclopentadienyl)dichlorotitanium(IV) complexes * substituent effects Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.778, year: 2001

Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

Science.gov (United States)

Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

2015-03-01

Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

N-tert-Butyl-3-hydroxy-5-androstene-17-carboxamide monohydrate

Directory of Open Access Journals (Sweden)

Jiang-Sheng Li

2009-07-01

Full Text Available In the title compound, C24H39NO2·H2O, the A and C rings of the pregnolene derivative sterol adopt chair conformations, with the B ring in a flattened chair conformation and the five-membered ring in an envelope conformation twisted about the C/D ring junction. The N-tert-butylcarboxamide substituent is equatorial. The 3β-hydroxy H atom and one H atom of the water molecule are disordered over two positions with equal occupancies. In the crystal structure, O—H...O hydrogen bonds between the 3β-hydroxy groups of neighbouring molecules form dimers in the bc plane and these dimers are stacked along the a axis by additional O—H...O hydrogen bonds involving the water molecules. The steric effect of the bulky tert-butyl substituent in the carboxamide chain precludes hydrogen-bond formation by the N—H group.

Exo-pi-bonding to an ortho-carborane hypercarbon atom: systematic icosahedral cage distortions reflected in the structures of the fluoro-, hydroxy- and amino-carboranes, 1-X-2-Ph-1,2-C2B10H10 (X=F, OH or NH2) and related anions.

Science.gov (United States)

Boyd, Lynn A; Clegg, William; Copley, Royston C B; Davidson, Matthew G; Fox, Mark A; Hibbert, Thomas G; Howard, Judith A K; Mackinnon, Angus; Peace, Richard J; Wade, Kenneth

2004-09-07

The structures of derivatives of phenyl-ortho-carborane bearing on the second cage hypercarbon atom a pi-donor substituent (F, OH, O-, NH2, NH- and CH2-) were investigated by NMR, X-ray crystallography and computational studies. The molecular structures of these compounds, notably their cage C1-C2 distances and the orientations of their pi-donor substituents (OH, NH2, NH- and CH2-) show remarkable and systematic variations with the degree of exo pi-bonding, which varies as expected with the pi-donor characteristics of the substituent.

EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

Directory of Open Access Journals (Sweden)

Jarosław KACZOR

2014-06-01

Full Text Available Durability deep groove ball bearings depends on factors (called attributes design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bearings to work three-bearing shafts, including elasticity and resilience three-bearing shafts.

Novel types of tripodal CMPO ligands: synthesis and extraction

Energy Technology Data Exchange (ETDEWEB)

Janczewski, D. [Twente Univ., Enschede (Netherlands). Lab. of Supramolecular Chemistry and Technology; Inst. of Materials Research and Engineering, Research Link (Singapore); Rawdanowicz, M.; Reinhoudt, D.N.; Verboom, W. [Twente Univ., Enschede (Netherlands). Lab. of Supramolecular Chemistry and Technology; Hill, C.; Martinez, I. [Commissariat a l' Energie Atomique, CEA-Valrho, DRCP/SCPS/LCSE, Bagnols-sur-Ceze (France)

2008-07-01

Novel tripodal CMPO ligands having either aryl groups at the N-atom or alkyl groups at the CMPO methylene bridge were prepared in good yields. In the latter case one alkyl group per CMPO moiety was selectively introduced. Extraction studies with Am{sup 3+} and Eu{sup 3+} show that there is an influence of the electronic character of the aryl groups on the extraction. Alkylation of the CMPO methylene group gives rise to a considerable decrease of the D-values (about 100-1000 times), dependent on the bulkiness of the alkyl substituent. (orig.)

Efficient SN2 fluorination of primary and secondary alkyl bromides by copper(I) fluoride complexes

KAUST Repository

Liu, Yanpin; Chen, Chaohuang; Li, Huaifeng; Huang, Kuo-Wei; Tan, Jianwei; Weng, Zhiqiang

2013-01-01

Copper(I) fluoride complexes ligated by phenanthroline derivatives have been synthesized and structurally characterized by X-ray crystallography. These complexes adopt as either ionic or neutral forms in the solid state, depending on the steric bulkiness of the substituent groups on the phenanthroline ligands. These complexes react with primary and secondary alkyl bromides to produce the corresponding alkyl fluorides in modest to good yields. This new method is compatible with a variety of important functional groups such as ether, thioether, amide, nitrile, methoxyl, hydroxyl, ketone, ester, and heterocycle moieties. © 2013 American Chemical Society.

Efficient SN2 fluorination of primary and secondary alkyl bromides by copper(I) fluoride complexes

KAUST Repository

Liu, Yanpin

2013-11-11

Copper(I) fluoride complexes ligated by phenanthroline derivatives have been synthesized and structurally characterized by X-ray crystallography. These complexes adopt as either ionic or neutral forms in the solid state, depending on the steric bulkiness of the substituent groups on the phenanthroline ligands. These complexes react with primary and secondary alkyl bromides to produce the corresponding alkyl fluorides in modest to good yields. This new method is compatible with a variety of important functional groups such as ether, thioether, amide, nitrile, methoxyl, hydroxyl, ketone, ester, and heterocycle moieties. © 2013 American Chemical Society.

Steric control of redox events in organo-uranium chemistry: synthesis and characterisation of U(V) oxo and nitrido complexes

OpenAIRE

Tsoureas, Nikolaos; Kilpatrick, Alexander; Inman, Christopher; Cloke, Frederick Geoffrey

2016-01-01

The synthesis and molecular structures of a U(V) neutral terminal oxo complex and a U(V) sodium uranium nitride contact ion pair are described. The synthesis of the former is achieved by the use of tBuNCO as a mild oxygen transfer reagent, whilst that of the latter is via the reduction of NaN3. Both mono-uranium complexes are stabilised by the presence of bulky silyl substituents on the ligand framework that facilitate a 2e- oxidation of a single U(III) centre. In contrast, when steric hindra...

Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

Science.gov (United States)

Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

2009-01-01

Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

OpenAIRE

Peter W. Tse; Dong Wang

2017-01-01

Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To exten...

Ring substituents mediate the morphology of PBDTTPD-PCBM bulk-heterojunction solar cells

KAUST Repository

Warnan, Julien

2014-04-08

Among π-conjugated polymer donors for efficient bulk-heterojunction (BHJ) solar cell applications, poly(benzo[1,2-b:4,5-b′]dithiophene- thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymers yield some of the highest open-circuit voltages (VOC, ca. 0.9 V) and fill-factors (FF, ca. 70%) in conventional (single-cell) BHJ devices with PCBM acceptors. In PBDTTPD, side chains of varying size and branching affect polymer self-assembly, nanostructural order, and impact material performance. However, the role of the polymer side-chain pattern in the intimate mixing between polymer donors and PCBM acceptors, and on the development of the BHJ morphology is in general less understood. In this contribution, we show that ring substituents such as furan (F), thiophene (T) and selenophene (S)-incorporated into the side chains of PBDTTPD polymers-can induce significant and, of importance, very different morphological effects in BHJs with PCBM. A combination of experimental and theoretical (via density functional theory) characterizations sheds light on how varying the heteroatom of the ring substituents impacts (i) the preferred side-chain configurations and (ii) the ionization, electronic, and optical properties of the PBDTTPD polymers. In parallel, we find that the PBDT(X)TPD analogs (with X = F, T, or S) span a broad range of power conversion efficiencies (PCEs, 3-6.5%) in optimized devices with improved thin-film morphologies via the use of 1,8-diiodooctane (DIO), and discuss that persistent morphological impediments at the nanoscale can be at the origin of the spread in PCE across optimized PBDT(X)TPD-based devices. With their high VOC ∼1 V, PBDT(X)TPD polymers are promising candidates for use in the high-band gap cell of tandem solar cells. © 2014 American Chemical Society.

Ring substituents mediate the morphology of PBDTTPD-PCBM bulk-heterojunction solar cells

KAUST Repository

Warnan, Julien; El Labban, Abdulrahman; Cabanetos, Clement; Hoke, Eric T.; Shukla, Pradeep Kumar; Risko, Chad; Bré das, Jean Luc; McGehee, Michael D.; Beaujuge, Pierre

2014-01-01

Among π-conjugated polymer donors for efficient bulk-heterojunction (BHJ) solar cell applications, poly(benzo[1,2-b:4,5-b′]dithiophene- thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymers yield some of the highest open-circuit voltages (VOC, ca. 0.9 V) and fill-factors (FF, ca. 70%) in conventional (single-cell) BHJ devices with PCBM acceptors. In PBDTTPD, side chains of varying size and branching affect polymer self-assembly, nanostructural order, and impact material performance. However, the role of the polymer side-chain pattern in the intimate mixing between polymer donors and PCBM acceptors, and on the development of the BHJ morphology is in general less understood. In this contribution, we show that ring substituents such as furan (F), thiophene (T) and selenophene (S)-incorporated into the side chains of PBDTTPD polymers-can induce significant and, of importance, very different morphological effects in BHJs with PCBM. A combination of experimental and theoretical (via density functional theory) characterizations sheds light on how varying the heteroatom of the ring substituents impacts (i) the preferred side-chain configurations and (ii) the ionization, electronic, and optical properties of the PBDTTPD polymers. In parallel, we find that the PBDT(X)TPD analogs (with X = F, T, or S) span a broad range of power conversion efficiencies (PCEs, 3-6.5%) in optimized devices with improved thin-film morphologies via the use of 1,8-diiodooctane (DIO), and discuss that persistent morphological impediments at the nanoscale can be at the origin of the spread in PCE across optimized PBDT(X)TPD-based devices. With their high VOC ∼1 V, PBDT(X)TPD polymers are promising candidates for use in the high-band gap cell of tandem solar cells. © 2014 American Chemical Society.

Evaluation of bearing configurations using the single bearing tester in liquid nitrogen

Science.gov (United States)

Jett, T.; Hall, P.; Thom, R.

1991-01-01

Various bearing configurations were tested using the Marshall Space Flight Center single bearing tester with LN2 as the cryogenic coolant. The baseline was one Rocketdyne phase one high pressure oxidizer turbopump (HPOTP) pump end 45-mm bore bearing. The bearing configurations that were tested included a Salox/M cage configuration, a silicon nitride ball configuration, an elongated cage configuration, and a Bray 601 grease configuration.

Fluorescence and amplified spontaneous emission of glass forming compounds containing styryl-4H-pyran-4-ylidene fragment

Energy Technology Data Exchange (ETDEWEB)

Vembris, Aivars, E-mail: aivars.vembris@cfi.lu.lv [Institute of Solid State Physics, University of Latvia, 8 Kengaraga Street, Riga LV-1063 (Latvia); Muzikante, Inta [Institute of Solid State Physics, University of Latvia, 8 Kengaraga Street, Riga LV-1063 (Latvia); Karpicz, Renata; Sliauzys, Gytis [Institute of Physics, Center for Physical Sciences and Technology, A. Gostauto 11, LT-01108 Vilnius (Lithuania); Miasojedovas, Arunas; Jursenas, Saulius [Institute of Applied Research, Vilnius University, Sauletekio 9-III, LT-10222 Vilnius (Lithuania); Gulbinas, Vidmantas [Institute of Physics, Center for Physical Sciences and Technology, A. Gostauto 11, LT-01108 Vilnius (Lithuania)

2012-09-15

Potential of glassy films of newly synthesised low molecular weight organic molecules for light amplification and lasing applications has been investigated by analysing fluorescence, transient differential absorption and amplified spontaneous emission properties. These non-symmetric and symmetric molecules contain styryl-4H-pyran-4-ylidene fragment with three different electron acceptor groups: dicyanomethylene, barbituric acid, indene-1,3-dione. Fluorescence quantum yields of the investigated compounds in solutions are between 0.32 and 0.54, while they drop down by an order of magnitude in thin solid films. Incorporation of bulky side groups reduced excitonic interactions enabling manifestation of amplified spontaneous emission in the neat films of the investigated derivatives. - Highlights: Black-Right-Pointing-Pointer Bulky substituents attached to DCM dye enable formation of neat glassy films. Black-Right-Pointing-Pointer Investigated dyes show amplified spontaneous emission in neat films. Black-Right-Pointing-Pointer Two electron donor groups negatively influence light amplification.

Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

DEFF Research Database (Denmark)

Thomsen, Kim; Klit, Peder

2012-01-01

A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff...... bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas...... the liner has practically no influence on the flexure journal bearing's performance....

Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage.

Science.gov (United States)

Hailer, Frank; Kutschera, Verena E; Hallström, Björn M; Klassert, Denise; Fain, Steven R; Leonard, Jennifer A; Arnason, Ulfur; Janke, Axel

2012-04-20

Recent studies have shown that the polar bear matriline (mitochondrial DNA) evolved from a brown bear lineage since the late Pleistocene, potentially indicating rapid speciation and adaption to arctic conditions. Here, we present a high-resolution data set from multiple independent loci across the nuclear genomes of a broad sample of polar, brown, and black bears. Bayesian coalescent analyses place polar bears outside the brown bear clade and date the divergence much earlier, in the middle Pleistocene, about 600 (338 to 934) thousand years ago. This provides more time for polar bear evolution and confirms previous suggestions that polar bears carry introgressed brown bear mitochondrial DNA due to past hybridization. Our results highlight that multilocus genomic analyses are crucial for an accurate understanding of evolutionary history.

Photochemical generation of highly destabilized vinyl cations: the effects of alpha- and beta-trifluoromethyl versus alpha- and beta-methyl substituents

NARCIS (Netherlands)

Alem, van K.; Belder, G.; Lodder, G.; Zuilhof, H.

2005-01-01

The photochemical reactions in methanol of the vinylic halides 1-4, halostyrenes with a methyl or a trifluoromethyl substituent at the - or -position, have been investigated quantitatively. Next to E/Z isomerization, the reactions are formation of vinyl radicals, leading to reductive dehalogenation

Substituent effect in spin-crossover behavior of iron(II)-Ar-pybox complexes (Ar-pybox = 4-aryl-2,6-bis(oxazolin-2-yl)pyridine)

Science.gov (United States)

Kimura, Akifumi; Ishida, Takayuki

2018-01-01

Spin-crossover (SCO) is a reversible transition between low-spin (LS) and high-spin (HS) states by external stimuli like heat. The SCO behavior of [Fe(Ar-pybox)2](ClO4)2 was investigated, where Ar-pybox stands for 4-aryl-2,6-bis(oxazolin-2-yl)pyridine with Ar = 4-pyridyl (4Py), 3-thienyl (3Th), and phenyl (Ph). They were characterized by means of single-crystal X-ray diffraction study, being consistent with the results of the magnetic measurements. The SCO temperatures (T1/2) in the polycrystalline state were determined to be 360 and 230 K for Ar = 4Py and Ph, respectively. The 3Th derivative possessed a HS state in all the temperature range. The solution susceptometry was also performed to purge intermolecular interaction and rigid crystal lattice effects, affording T1/2 = 310, 240, and 240 K for Ar = 4Py, 3Th, and Ph, respectively, in acetone. The substituent effect analysis using the Hammett substituent constant (σp) clarified that electron-withdrawing groups raise T1/2. A plausible model describing the substituent effect on T1/2 is proposed based on d-π interaction. The present result is regarded as a successful example of crystal field engineering.

Rationalizing substituent effects in 1-azathioxanthone photophysics

Science.gov (United States)

Junker, Anne Kathrine R.; Just Sørensen, Thomas

2018-01-01

The influence of an electron donating substituent on the photophysical properties of 1-azathioxanthone dyes has been investigated using optical spectroscopy and theoretical models. The motivation behind the study is based on the fact that thioxanthones are efficient triplet sensitizers, and thus promising sensitizers for lanthanide centered emission. By adding an aza group to one of the phenyl ring systems, direct coordination to a lanthanide center becomes possible, which makes azathoixanthones great candidates as antenna chromophores in lanthanide(III) based dyes. Here, three 1-azathioxanthone derivatives have been synthesized targeting efficient triplet formation following absorption in the visible range of the spectrum. This is achieved by adding methoxy groups to the 1-azathioxanthone core. The derivatives were characterized using absorption, emission, and time-gated emission spectroscopy, where fluorescent quantum yields, singlet and triplet excited states lifetimes were determined. The experimentally determined photophysical properties of the three 1-azathioxanthone compounds are contrasted to those of the parent thioxanthone and is rationalized using the Strickler-Berg equation, Hückel MO theory, and Dewar’s rules in combination with computational chemistry. We find that the transition energies follow predictions, but that the overall photophysical properties are determined by the relative energies as well as the nature of the involved states in both the singlet and the triplet excited state manifolds.

Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis

Science.gov (United States)

Cong, Feiyun; Chen, Jin; Dong, Guangming; Pecht, Michael

2013-04-01

Rolling element bearing faults are among the main causes of breakdown in rotating machines. In this paper, a rolling bearing fault model is proposed based on the dynamic load analysis of a rotor-bearing system. The rotor impact factor is taken into consideration in the rolling bearing fault signal model. The defect load on the surface of the bearing is divided into two parts, the alternate load and the determinate load. The vibration response of the proposed fault signal model is investigated and the fault signal calculating equation is derived through dynamic and kinematic analysis. Outer race and inner race fault simulations are realized in the paper. The simulation process includes consideration of several parameters, such as the gravity of the rotor-bearing system, the imbalance of the rotor, and the location of the defect on the surface. The simulation results show that different amplitude contributions of the alternate load and determinate load will cause different envelope spectrum expressions. The rotating frequency sidebands will occur in the envelope spectrum in addition to the fault characteristic frequency. This appearance of sidebands will increase the difficulty of fault recognition in intelligent fault diagnosis. The experiments given in the paper have successfully verified the proposed signal model simulation results. The test rig design of the rotor bearing system simulated several operating conditions: (1) rotor bearing only; (2) rotor bearing with loader added; (3) rotor bearing with loader and rotor disk; and (4) bearing fault simulation without rotor influence. The results of the experiments have verified that the proposed rolling bearing signal model is important to the rolling bearing fault diagnosis of rotor-bearing systems.

Polar bears at risk

Energy Technology Data Exchange (ETDEWEB)

Norris, S.; Rosentrater, L.; Eid, P.M. [WWF International Arctic Programme, Oslo (Norway)

2002-05-01

Polar bears, the world's largest terrestrial carnivore, spend much of their lives on the arctic sea ice. This is where they hunt and move between feeding, denning, and resting areas. The world population, estimated at 22,000 bears, is made up of 20 relatively distinct populations varying in size from a few hundred to a few thousand animals. About 60 per cent of all polar bears are found in Canada. In general, the status of this species is stable, although there are pronounced differences between populations. Reductions in the extent and thickness of sea ice has lead the IUCN Polar Bear Specialist Group to describe climate change as one of the major threats facing polar bears today. Though the long-term effects of climate change will vary in different areas of the Arctic, impacts on the condition and reproductive success of polar bears and their prey are likely to be negative. Longer ice-free periods resulting from earlier break-up of sea ice in the spring and later formation in the fall is already impacting polar bears in the southern portions of their range. In Canada's Hudson Bay, for example, bears hunt on the ice through the winter and into early summer, after which the ice melts completely, forcing bears ashore to fast on stored fat until freeze-up in the fall. The time bears have on the ice to hunt and build up their body condition is cut short when the ice melts early. Studies from Hudson Bay show that for every week earlier that ice break-up occurs, bears will come ashore 10 kg lighter and in poorer condition. It is likely that populations of polar bears dividing their time between land and sea will be severely reduced and local extinctions may occur as greenhouse gas emissions continue to rise and sea ice melts. Expected changes in regional weather patterns will also impact polar bears. Rain in the late winter can cause maternity dens to collapse before females and cubs have departed, thus exposing occupants to the elements and to predators. Such

Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

Science.gov (United States)

Fleming, David P.; Poplawski, J. V.

2002-01-01

Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity.

Science.gov (United States)

Dubois, Sara; Fraser, David

2013-09-12

The "pot bears" received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

Genetic relationships of extant brown bears (Ursus arctos) and polar bears (Ursus maritimus).

Science.gov (United States)

Cronin, Matthew A; MacNeil, Michael D

2012-01-01

Polar bears (Ursus maritimus) and brown bears (Ursus arctos) are closely related species for which extensive mitochondrial and nuclear phylogenetic comparisons have been made. We used previously published genotype data for 8 microsatellite DNA loci from 930 brown bears in 19 populations and 473 polar bears in 16 populations to compare the population genetic relationships of extant populations of the species. Genetic distances (Nei standard distance = 1.157), the proportion of private alleles (52% of alleles are not shared by the species), and Bayesian cluster analysis are consistent with morphological and life-history characteristics that distinguish polar bears and brown bears as different species with little or no gene flow among extant populations.

Superoxide radical-mediated photocatalytic oxidation of phenolic compounds over Ag{sup +}/TiO{sub 2}: Influence of electron donating and withdrawing substituents

Energy Technology Data Exchange (ETDEWEB)

Xiao, Jiadong [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xie, Yongbing, E-mail: ybxie@ipe.ac.cn [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Han, Qingzhen [State Key Laboratory of Multi-phase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Cao, Hongbin [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Tianjin 300072 (China); Wang, Yujiao [Department of Chemical and Biomedical Engineering, University of Science and Technology Beijing (China); Nawaz, Faheem; Duan, Feng [National Engineering Laboratory for Hydrometallurgical Cleaner Production Technology, Beijing Engineering Research Center of Process Pollution Control, Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

2016-03-05

Highlights: • A weak EWG benefited photocatalytic oxidation of phenols the most. • Phenolic compounds were dominantly oxidized by ·O{sub 2}{sup −}, rather than ·OH, {sup 1}O{sub 2} or h{sup +}. • ·O{sub 2}{sup −} preferred to nucleophilically attack EDG substituted phenols. • ·O{sub 2}{sup −} more likely electrophilically attacked EWG substituted phenols. • ·O{sub 2}{sup −} simultaneously nucleophilically and electrophilically assaulted p-chlorophenol. - Abstract: A comparative study was constructed to correlate the electronic property of the substituents with the degradation rates of phenolic compounds and their oxidation pathways under UV with Ag{sup +}/TiO{sub 2} suspensions. It was verified that a weak electron withdrawing substituent benefited photocatalytic oxidation the most, while an adverse impact appeared when a substituent was present with stronger electron donating or withdrawing ability. The addition of p-benzoquinone dramatically blocked the degradation, confirming superoxide radicals (·O{sub 2}{sup −}) as the dominant photooxidant, rather than hydroxyl radicals, singlet oxygen or positive holes, which was also independent of the substituent. Hammett relationship was established based on pseudo-first-order reaction kinetics, and it revealed two disparate reaction patterns between ·O{sub 2}{sup −} and phenolic compounds, which was further verified by the quantum chemical computation on the frontier molecular orbitals and Mulliken charge distributions of ·O{sub 2}{sup −} and phenolic compounds. It was found that electron donating group (EDG) substituted phenols were more likely nucleophilically attacked by ·O{sub 2}{sup −}, while ·O{sub 2}{sup −} preferred to electrophilically assault electron withdrawing group (EWG) substituted phenols. Exceptionally, electrophilic and nucleophilic attack by ·O{sub 2}{sup −} could simultaneously occur in p-chlorophenol degradation, consequently leading to its highest rate

R+D works for the further development of high temperature reactors. (1) Captive bearing experiments for active magnetic bearings. (2) Captive bearing test for HTR blowers

International Nuclear Information System (INIS)

1991-01-01

When using active magnetic bearings as blower shaft bearings, blower motors and bearings must be protected against mechanical damage in case of faults (example: total electrical supply failure due to the supply cables breaking). So-called captive bearings are provided, in order to be able to shut the blowers down safely in such faults. These captive bearings are roller bearings which are additionally fitted in the area of the blower shaft bearings, to prevent mechanical contact between the blower rotor and stator. As there was little experience available for the given boundary conditions, such as - speed, - acceleration, - bearing load, - bearing dimensions, - ambient conditions, appropriate development and tests had to be carried out. It was important to determine suitable captive bearings and the necessary ambient conditions, which will make it possible to support the failures of the magnetic bearings to be expected in 40 years' operation of the reactor without damage and to meet the requirements of the captive bearings. (orig./GL) [de

EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

Directory of Open Access Journals (Sweden)

Emin GÜLLÜ

2000-01-01

Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

Gradual and stepwise pyrolyses of insoluble organic matter from the Murchison meteorite revealing chemical structure and isotopic distribution

Science.gov (United States)

Okumura, Fumiaki; Mimura, Koichi

2011-11-01

To study the detailed structural and isotopic heterogeneity of the insoluble organic matter (IOM) of the Murchison meteorite, we performed two types of pyrolytic experiments: gradual pyrolysis and stepwise pyrolysis. The pyrolysates from the IOM contained 5 specific organic groups: aliphatic hydrocarbons, aromatic hydrocarbons, sulfur-bearing compounds, nitrogen-bearing compounds, and oxygen-bearing compounds. The release temperatures and the compositions of these pyrolysates demonstrated that the IOM is composed of a thermally unstable part and a thermally stable part. The thermally unstable part mainly served as the linkage and substituent portion that bound the thermally stable part, which was dispersed throughout the IOM. The linkage and substituent portion consisted of aliphatic hydrocarbons from C 4 to C 8, aromatic hydrocarbons with up to 6 rings, sulfo and thiol groups (the main reservoirs of sulfur in the IOM), and carboxyl and hydroxyl groups (the main reservoirs of oxygen). However, the thermally stable part was composed of polycyclic aromatic hydrocarbons (PAHs) containing nitrogen heterocycles in the IOM. Isotopic data showed that the aliphatic and aromatic hydrocarbons in the linkage and substituent portion were rich in D and 13C, while the thermally stable part was deficient in D and 13C. The structural and isotopic features suggested that the IOM was formed by mixing sulfur- and oxygen-bearing compounds rich in D and 13C (e.g., polar compounds in the interstellar medium (ISM)) and nitrogen-bearing PAHs deficient in D and 13C (e.g., polymerized compounds in the ISM).

Passive magnetic bearing configurations

Science.gov (United States)

Post, Richard F [Walnut Creek, CA

2011-01-25

A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

Bulky melamine-based Zn-porphyrin tweezer as a CD probe of molecular chirality.

Science.gov (United States)

Petrovic, Ana G; Vantomme, Ghislaine; Negrón-Abril, Yashira L; Lubian, Elisa; Saielli, Giacomo; Menegazzo, Ileana; Cordero, Roselynn; Proni, Gloria; Nakanishi, Koji; Carofiglio, Tommaso; Berova, Nina

2011-10-01

The transfer of chirality from a guest molecule to an achiral host is the subject of significant interest especially when, upon chiral induction, the chiroptical response of the host/guest complex can effectively report the absolute configuration (AC) of the guest. For more than a decade, dimeric metalloporphyrin hosts (tweezers) have been successfully applied as chirality probes for determination of the AC for a wide variety of chiral synthetic compounds and natural products. The objective of this study is to investigate the utility of a new class of melamine-bridged Zn-porphyrin tweezers as sensitive AC reporters. A combined approach based on an experimental CD analysis and a theoretical prediction of the prevailing interporphyrin helicity demonstrates that these tweezers display favorable properties for chiral recognition. Herein, we discuss the application of the melamine-bridged tweezer to the chiral recognition of a diverse set of chiral guests, such as 1,2-diamines, α-amino-esters and amides, secondary alcohols, and 1,2-amino-alcohols. The bulky periphery and the presence of a rigid porphyrin linkage lead, in some cases, to a more enhanced CD sensitivity than that reported earlier with other tweezers. Copyright © 2011 Wiley-Liss, Inc.

Hybridization Properties of RNA Containing 8-Methoxyguanosine and 8-Benzyloxyguanosine.

Directory of Open Access Journals (Sweden)

Daniel Sylwester Baranowski

Full Text Available Modified nucleobase analogues can serve as powerful tools for changing physicochemical and biological properties of DNA or RNA. Guanosine derivatives containing bulky substituents at 8 position are known to adopt syn conformation of N-glycoside bond. On the contrary, in RNA the anti conformation is predominant in Watson-Crick base pairing. In this paper two 8-substituted guanosine derivatives, 8-methoxyguanosine and 8-benzyloxyguanosine, were synthesized and incorporated into oligoribonucleotides to investigate their influence on the thermodynamic stability of RNA duplexes. The methoxy and benzyloxy substituents are electron-donating groups, decreasing the rate of depurination in the monomers, as confirmed by N-glycoside bond stability assessments. Thermodynamic stability studies indicated that substitution of guanosine by 8-methoxy- or 8-benzyloxyguanosine significantly decreased the thermodynamic stability of RNA duplexes. Moreover, the presence of 8-substituted guanosine derivatives decreased mismatch discrimination. Circular dichroism spectra of modified RNA duplexes exhibited patterns typical for A-RNA geometry.

Comparison of fixed-bearing and mobile-bearing total knee arthroplasty after high tibial osteotomy.

Science.gov (United States)

Hernigou, Philippe; Huys, Maxime; Pariat, Jacques; Roubineau, François; Flouzat Lachaniette, Charles Henri; Dubory, Arnaud

2018-02-01

There is no information comparing the results of fixed-bearing total knee replacement and mobile-bearing total knee replacement in the same patients previously treated by high tibial osteotomy. The purpose was therefore to compare fixed-bearing and mobile-bearing total knee replacements in patients treated with previous high tibial osteotomy. We compared the results of 57 patients with osteoarthritis who had received a fixed-bearing prosthesis after high tibial osteotomy with the results of 41 matched patients who had received a rotating platform after high tibial osteotomy. The match was made for length of follow-up period. The mean follow-up was 17 years (range, 15-20 years). The patients were assessed clinically and radiographically. The pre-operative knee scores had no statistically significant differences between the two groups. So was the case with the intra-operative releases, blood loss, thromboembolic complications and infection rates in either group. There was significant improvement in both groups of knees, and no significant difference was observed between the groups (i.e., fixed-bearing and mobile-bearing knees) for the mean Knee Society knee clinical score (95 and 92 points, respectively), or the Knee Society knee functional score (82 and 83 points, respectively) at the latest follow-up. However, the mean post-operative knee motion was higher for the fixed-bearing group (117° versus 110°). In the fixed-bearing group, one knee was revised because of periprosthetic fracture. In the rotating platform mobile-bearing group, one knee was revised because of aseptic loosening of the tibial component. The Kaplan-Meier survivorship for revision at ten years of follow-up was 95.2% for the fixed bearing prosthesis and 91.1% for the rotating platform mobile-bearing prosthesis. Although we did manage to detect significant differences mainly in clinical and radiographic results between the two groups, we found no superiority or inferiority of the mobile-bearing

Hydrodynamic sliding bearings vs. roller bearings. Segmented sliding bearings for higher rotational speed; Hydrodynamische Gleitlager versus Waelzlager. Segmentgleitlager fuer hoehere Drehzahlen

Energy Technology Data Exchange (ETDEWEB)

Hagenhoff, M.; Sauer, M. [Main-Metall-Giesserei Fritz Schorr GmbH und Co. KG, Altenglan (Germany)

2004-10-01

Hydrodynamic sliding bearings are considered only in cases when roller bearings reach their speed limits and there is no other solution. However, this view neglects the fact that there are modern, optimised sliding bearings which have more advantages over roller bearings than should be expected. Many producers of sliding bearings also have computer programs enabling them to offer customised solutions, i.e. optimal adaptation of the bearings to their specific operating conditions. (orig.) [German] Hydrodynamische Gleitlager werden oft erst dann in Betracht gezogen, wenn man an die Drehzahlgrenzen von Waelzlagern stoesst und keine andere sinnvolle Alternative mehr in Frage kommt. Dabei uebersieht man leicht, dass es moderne, optimierte Gleitlagerkonstruktionen gibt, die weitaus haeufiger ihre Staerken im Vergleich zu Waelzlagern ausspielen koennen als zunaechst vermutet. Viele Gleitlagerhersteller haben zudem heute Berechnungsprogramme zur Verfuegung, die eine optimale Anpassung der Lager an die speziellen Betriebsbedingungen erlauben. (orig.)

Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears

OpenAIRE

Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

2015-01-01

© 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd. Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we...

The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence.

Directory of Open Access Journals (Sweden)

Andrew Ladle

Full Text Available Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use. We documented (a occurrence of grizzly bears and black bears relative to habitat variables (b occurrence and intensity of use relative to competing bear species and motorised and non-motorised recreational activity, and (c temporal overlap in activity patterns among the two bear species and recreationists. Grizzly bears were spatially separated from black bears, selecting higher elevations and locations farther from roads. Both species co-occurred with motorised and non-motorised recreation, however, grizzly bears reduced their intensity of use of sites with motorised recreation present. Black bears showed higher temporal activity overlap with recreational activity than grizzly bears, however differences in bear daily activity patterns between sites with and without motorised and non-motorised recreation were not significant. Reduced intensity of use by grizzly bears of sites where motorised recreation was present is a concern given off-road recreation is becoming increasingly popular in North America, and can negatively influence grizzly bear recovery by reducing foraging opportunities near or on trails. Camera traps and multi-species occurrence models offer non-invasive methods for identifying how habitat use by animals changes relative to sympatric species, including humans. These conclusions emphasise the need for integrated land-use planning, access management, and grizzly bear conservation efforts to consider the implications of continued access for

The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence.

Science.gov (United States)

Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S

2018-01-01

Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use. We documented (a) occurrence of grizzly bears and black bears relative to habitat variables (b) occurrence and intensity of use relative to competing bear species and motorised and non-motorised recreational activity, and (c) temporal overlap in activity patterns among the two bear species and recreationists. Grizzly bears were spatially separated from black bears, selecting higher elevations and locations farther from roads. Both species co-occurred with motorised and non-motorised recreation, however, grizzly bears reduced their intensity of use of sites with motorised recreation present. Black bears showed higher temporal activity overlap with recreational activity than grizzly bears, however differences in bear daily activity patterns between sites with and without motorised and non-motorised recreation were not significant. Reduced intensity of use by grizzly bears of sites where motorised recreation was present is a concern given off-road recreation is becoming increasingly popular in North America, and can negatively influence grizzly bear recovery by reducing foraging opportunities near or on trails. Camera traps and multi-species occurrence models offer non-invasive methods for identifying how habitat use by animals changes relative to sympatric species, including humans. These conclusions emphasise the need for integrated land-use planning, access management, and grizzly bear conservation efforts to consider the implications of continued access for motorised

Unbalance Response Prediction for Rotors on Ball Bearings Using Speed and Load Dependent Nonlinear Bearing Stiffness

Science.gov (United States)

Fleming, David P.; Poplawski, J. V.

2003-01-01

Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic analysis requires that bearing forces corresponding to the actual bearing deflection be utilized. For this work bearing forces were calculated by COBRA-AHS, a recently developed rolling-element bearing analysis code. Bearing stiffness was found to be a strong function of bearing deflection, with higher deflection producing markedly higher stiffness. Curves fitted to the bearing data for a range of speeds and loads were supplied to a flexible rotor unbalance response analysis. The rotordynamic analysis showed that vibration response varied nonlinearly with the amount of rotor imbalance. Moreover, the increase in stiffness as critical speeds were approached caused a large increase in rotor and bearing vibration amplitude over part of the speed range compared to the case of constant bearing stiffness. Regions of bistable operation were possible, in which the amplitude at a given speed was much larger during rotor acceleration than during deceleration. A moderate amount of damping will eliminate the bistable region, but this damping is not inherent in ball bearings.

Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

Directory of Open Access Journals (Sweden)

David Fraser

2013-09-01

Full Text Available The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

Bearing construction for refrigeration compresssor

Science.gov (United States)

Middleton, Marc G.; Nelson, Richard T.

1988-01-01

A hermetic refrigeration compressor has a cylinder block and a crankshaft rotatable about a vertical axis to reciprocate a piston in a cylinder on the cylinder block. A separate bearing housing is secured to the central portion of the cylinder block and extends vertically along the crankshaft, where it carries a pair of roller bearings to journal the crankshaft. The crankshaft has a radially extending flange which is journaled by a thrust-type roller bearing above the bearing housing to absorb the vertical forces on the crankshaft so that all three of the roller bearings are between the crankshaft and the bearing housing to maintain and control the close tolerances required by such bearings.

A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring

Science.gov (United States)

Kerst, Stijn; Shyrokau, Barys; Holweg, Edward

2018-05-01

This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.

Solid-State Organization and Ambipolar Field-Effect Transistors of Benzothiadiazole-Cyclopentadithiophene Copolymer with Long Branched Alkyl Side Chains

Directory of Open Access Journals (Sweden)

Martin Baumgarten

2013-06-01

Full Text Available The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with long, branched decyl-tetradecyl side chains (CDT-BTZ-C14,10 is investigated. The C14,10 substituents are sterically demanding and increase the π-stacking distance to 0.40 nm from 0.37 nm for the same polymer with linear hexadecyls (C16. Despite the bulkiness, the C14,10 side chains tend to crystallize, leading to a small chain-to-chain distance between lamellae stacks and to a crystal-like microstructure in the thin film. Interestingly, field-effect transistors based on solution processed layers of CDT-BTZ-C14,10 show ambipolar behavior in contrast to CDT-BTZ-C16 with linear side chains, for which hole transport was previously observed. Due to the increased π-stacking distance, the mobilities are only 6 × 10−4 cm²/Vs for electrons and 6 × 10−5 cm²/Vs for holes, while CDT-BTZ-C16 leads to values up to 5.5 cm²/Vs. The ambipolarity is attributed to a lateral shift between stacked backbones provoked by the bulky C14,10 side chains. This reorganization is supposed to change the transfer integrals between the C16 and C14,10 substituted polymers. This work shows that the electronic behavior in devices of one single conjugated polymer (in this case CDT-BTZ can be controlled by the right choice of the substituents to place the backbones in the desired packing.

EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

OpenAIRE

Jarosław KACZOR

2014-01-01

Durability deep groove ball bearings depends on factors (called attributes) design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bea...

Tunable photoluminescent materials based on two phenylcarbazole-based dimers through the substituent groups

Energy Technology Data Exchange (ETDEWEB)

Tang, Gui-Mei, E-mail: meiguit@163.com; Chi, Rui-Hai; Wan, Wen-Zhu; Chen, Zhi-Qiang; Yan, Ting-Xiang; Dong, Yan-Ping; Wang, Yong-Tao, E-mail: ceswyt@qlu.edu.cn; Cui, Yue-Zhi

2017-05-15

Two phenylcarbazole-based dimers, namely, 9,9'-diphenyl-9H,9'H−3,3'-bicarbazole (1) and 9,9'-bis(4-bromophenyl)−9H,9'H−3,3'-bicarbazole (2), have been obtained through the oxidation of 9-phenylcarbazole and 9-(4’-bromophenyl) in the presence of FeCl{sub 3}, respectively, which show strong photoluminescent properties with the fluorescence quantum yields of 0.2 and 0.21 based on the reference of Quinin sulfate, respectively. The maximal emission peak of compounds 1 and 2 were observed at 465 and 413 nm in the solid state, respectively, revealing that the luminescent properties were tuned by the substituent group. The title compounds were characterized by FI-IR, UV–vis, {sup 1}H-NMR, {sup 13}C-NMR, {sup 1}H−{sup 13}C NMR, mass spectra, elemental analysis (EA) and single-crystal X-ray diffraction. Both compounds 1 and 2 crystallize in space group P-1, and supramolecular hydrogen bondings and stacking interactions between aromatic rings are observed. Compounds 1 and 2 display trans- and cis-formation structures, respectively. Two compounds show high thermal stabilities, in which the decomposition temperature is 414 and 363 °C for 1 and 2, respectively. - Graphical abstract: Two phenylcarbazole-based dimers have been obtained through the oxidation of 9-phenylcarbazole and 9-(4’-bromophenyl) in the presence of FeCl{sub 3}, respectively. The maximal emission peaks of compounds 1 and 2 were observed at 465 and 413 nm, respectively, revealing that the luminescent properties were tuned by the substituent group. Compounds 1 and 2 display trans- and cis-formation structures, respectively, and they show high thermal stabilities.

Synthesis and characterization of novel polyamide-ethers based on bis-imidazole containing bulky aryl pendant groups

Directory of Open Access Journals (Sweden)

Seyed Mahdi Saadati

2013-01-01

Full Text Available A series of novel polyamide-ethers (PAEs based on bis-imidazole containing bulky aryl pendant groups was prepared by direct polycondensation of a diamine, 4-(1-(4-(4-(2-(4-aminophenyl-4,5-diphenyl-1H-imidazol-1-ylphenoxyphenyl-4,5-diphenyl-1H-imidazol-2-ylbenzenamine (DABI, and various dicarboxylic acids. All the resulting polyamide-ethers were amorphous with inherent viscosities ranged from 0.52 to 0.61 dL/g and were readily soluble in many organic solvents which could be solution-cast into transparent and tough films. The glass transition temperatures (Tg of these polymers were affected considerably by their chemical structure and ranged from 230 to 310 ºC. They had useful levels of thermal stability associated with relatively high temperatures of 10% weight loss (T10 in the range of 329-399 ºC in air atmosphere.

Dose-response and failure pattern for bulky or barrel-shaped stage IB cervical cancer treated by combined photon irradiation and extrafascial hysterectomy

International Nuclear Information System (INIS)

Maruyama, Y.; van Nagell, J.R.; Yoneda, J.; Donaldson, E.; Gallion, H.H.; Higgins, R.; Powell, D.; Kryscio, R.; Berner, B.

1989-01-01

From 1975 to 1987, 80 patients with bulky or barrel-shaped Stage IB cervical cancer were treated with preoperative irradiation and Cs-137 intracavitary implant therapy, before a planned extrafascial abdominal hysterectomy, using a consistent treatment policy. Of the hysterectomy specimens obtained, 37% were positive histologically at 89 +/- 2.3 days after the start of radiotherapy and at 4 to 6 weeks after the completion of radiation therapy. Sixty-three percent were negative after a total external and internal cervix irradiation dose of 9642 cGy at point T. The average point A dose contributed by intracavitary therapy was 2104 cGy. The survival rate at 5 years was 84%: At 10 years the survival rate was 78%. The failure pattern was analyzed for patients who had positive and negative specimens. The patients with positive specimens failed pelvically or pelvically and distantly. Patients with negative specimens failed in extrapelvic or distant metastatic sites. Preoperative radiotherapy led to excellent local and pelvic control of tumor, and the failures became predominantly distant metastases. The combined radiosurgical therapy was tolerated well and allowed surgical staging of disease. This permitted earlier and selective consideration of adjunctive therapy (i.e., paraaortic irradiation, chemotherapy, or chemoradiotherapy). The dose-response data give insight into the effects of photon radiotherapy on bulky or barrel Stage IB cervical cancers and correlate histologic status with failure pattern, outcome, and long-term survival

Design rules for charge-transport efficient host materials for phosphorescent organic light-emitting diodes.

Science.gov (United States)

May, Falk; Al-Helwi, Mustapha; Baumeier, Björn; Kowalsky, Wolfgang; Fuchs, Evelyn; Lennartz, Christian; Andrienko, Denis

2012-08-22

The use of blue phosphorescent emitters in organic light-emitting diodes (OLEDs) imposes demanding requirements on a host material. Among these are large triplet energies, the alignment of levels with respect to the emitter, the ability to form and sustain amorphous order, material processability, and an adequate charge carrier mobility. A possible design strategy is to choose a π-conjugated core with a high triplet level and to fulfill the other requirements by using suitable substituents. Bulky substituents, however, induce large spatial separations between conjugated cores, can substantially reduce intermolecular electronic couplings, and decrease the charge mobility of the host. In this work we analyze charge transport in amorphous 2,8-bis(triphenylsilyl)dibenzofuran, an electron-transporting material synthesized to serve as a host in deep-blue OLEDs. We show that mesomeric effects delocalize the frontier orbitals over the substituents recovering strong electronic couplings and lowering reorganization energies, especially for electrons, while keeping energetic disorder small. Admittance spectroscopy measurements reveal that the material has indeed a high electron mobility and a small Poole-Frenkel slope, supporting our conclusions. By linking electronic structure, molecular packing, and mobility, we provide a pathway to the rational design of hosts with high charge mobilities.

Bearing restoration by grinding

Science.gov (United States)

Hanau, H.; Parker, R. J.; Zaretsky, E. V.; Chen, S. M.; Bull, H. L.

1976-01-01

A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

A Novel Mechanism of Sugar Selection Utilized by a Human X-family DNA Polymerase†

Science.gov (United States)

Brown, Jessica A.; Fiala, Kevin A.; Fowler, Jason D.; Sherrer, Shanen M.; Newmister, Sean A.; Dyum, Wade W.; Suo, Zucai

2009-01-01

During DNA synthesis, most DNA polymerases and reverse transcriptases select against ribonucleotides via a steric clash between the ribose 2′-hydroxyl group and the bulky side chain of an active site residue. Here, we demonstrated that human DNA polymerase λ used a novel sugar selection mechanism to discriminate against ribonucleotides, whereby the ribose 2′-hydroxyl group was excluded mostly by a backbone segment and slightly by the side chain of Y505. Such a steric clash was further demonstrated to be dependent on the size and orientation of the substituent covalently attached at the ribonucleotide C2′ position. PMID:19900463

Synthesis, spectral and photophysical properties of novel phthalocyanines bearing bulky phenantroxy moiety

International Nuclear Information System (INIS)

Erdogmuş, Ali; Lütfi Ugur, Ahmet; Memişoglu, Abdussamed; Erden, İbrahim

2013-01-01

The synthesis, characterization, spectral and photophysical properties of soluble 9-Phenanthroxy substituted oxo-titanium (IV), zinc, magnesium and nickel phthalocyanines (1a, 1b, 1c and 1d) are reported for the first time. The new compounds have been characterized by elemental analysis, FT-IR, 1 H–NMR spectroscopy, electronic spectroscopy and mass spectra. General trends are described for spectral, fluorescence properties and fluorescence quantum yields of these compounds in dimethylsulfoxide (DMSO) and toluene. All phthalocyanine complexes (1a to 1d) exhibited excellent solubility in organic solvents such as dichloromethane, chloroform, THF, toluene, DMF and DMSO. - Highlights: ► New metallophthalocyanines (1a–1d) were synthesized. ► These new phthalocyanine derivatives show the enhanced solubility in organic solvents. ► The spectral and photophysical properties of TiO(IV), zinc (II) and Mg(II) phthalocyanine (1a–1c) are investigated in DMSO and toluene. ► Ground state electronic absorption and fluorescence spectra.

Phosphorus-containing podands. 14. Effect of alkyl substituents at phosphorus atom on complexing ability of neutral monopodands. On the nature of abnormal alkyl effect

International Nuclear Information System (INIS)

Tsvetkov, E.N.; Evreinov, V.I.; Bondarenko, N.A.; Safronova, Z.V.

1996-01-01

The previously revealed unusual effect of alkyl substituents at phosphorus atom in phosphorus-containing monopodands of the general formula o-R 2 P(O)C 6 H 4 (OCH 2 CH 2 ) n OC 6 H 4 P(O)R 2 -o, n=1-5, R = Alk, Ph, OEt on their complexing ability towards alkali metals cations has been interpreted. Alkyl radicals create great spatial obstacles to rotation of R 2 P(O) fragments around the C-P bond as compared with other substituents, which gives rise to the appearance of anomalous alkyl effect. Solvation is an additional factor, which can bring about the anomalous effect appearance or a change in the degree of its pronouncement. 47 refs.; 3 figs.; 7 tabs

Impact of Fixed-Bearing and Mobile-Bearing Tibial Insert in Unicondylar Knee Arthroplasty

Directory of Open Access Journals (Sweden)

Mehmet Faruk Çatma

2016-06-01

Full Text Available INTRODUCTION: The aim of the study is to investigate the impact of fixed or mobile-bearing tibial inserts on patellofemoral arthrosis and evaluate which one to be preferred for patients with patellofemoral arthrosis. METHODS: Operated in our clinic between January 2009 and February 2013, 33 with patellofemoral arthritis together with anteromedial compartment arthritis were included in the study. Patellofemoral joints of patients were evaluated according to the scoring system defined by Fulkerson-Shea. RESULTS: Unicondylar knee arthroplasty with fixed-bearing tibial insertsand 22 (66,6% (male: 3, female: 19 and unicondylar knee arthroplasty with mobile-bearing tibial inserts 11 (33,9 % (male: 2, female: 9 were implanted.Average knee flexion was found to be 116,5 (100-135 degrees in 22 patients with mobile-bearing tibial inserts, and 114,5 (95-135 in 11 patients with fixed-bearing tibial inserts. DISCUSSION AND CONCLUSION: Patellofemoral arthrosis is an important factor for unicondylar knee arthroplasty prognosis and one of the determinants of patient satisfaction. Significantly less patellofemoral complaints were seen with UKA with fixed-bearing tibial insert compared to mobile-bearing tibial insert.

Climate Drives Polar Bear Origins

Science.gov (United States)

In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

Enantioselective copper catalysed intramolecular C-H insertion reactions of α-diazo-β-keto sulfones, α-diazo-β-keto phosphine oxides and 2-diazo-1,3-diketones; the influence of the carbene substituent.

Science.gov (United States)

Shiely, Amy E; Slattery, Catherine N; Ford, Alan; Eccles, Kevin S; Lawrence, Simon E; Maguire, Anita R

2017-03-22

Enantioselectivities in C-H insertion reactions, employing the copper-bis(oxazoline)-NaBARF catalyst system, leading to cyclopentanones are highest with sulfonyl substituents on the carbene carbon, and furthermore, the impact is enhanced by increased steric demand on the sulfonyl substituent (up to 91%ee). Enantioselective intramolecular C-H insertion reactions of α-diazo-β-keto phosphine oxides and 2-diazo-1,3-diketones are reported for the first time.

Clinical Analysis of stereotactic body radiation therapy using extracranial gamma knife for patients with mainly bulky inoperable early stage non-small cell lung carcinoma

Directory of Open Access Journals (Sweden)

Tang Hanjun

2011-07-01

Full Text Available Abstract Purpose To evaluate the clinical efficacy and toxicity of stereotactic body radiation therapy (SBRT using extracranial gamma knife in patients with mainly bulky inoperable early stage non-small cell lung carcinoma (NSCLC. Materials and methods A total of 43 medically inoperable patients with mainly bulky Stage I/II NSCLC received SBRT using gamma knife were reviewed. The fraction dose and the total dose were determined by the radiation oncologist according to patients' general status, tumor location, tumor size and the relationship between tumor and nearby organ at risk (OAR. The total dose of 34~47.5 Gy was prescribed in 4~12 fractions, 3.5~10 Gy per fraction, one fraction per day or every other day. The therapeutic efficacy and toxicity were evaluated. Results The median follow-up was 22 months (range, 3-102 months. The local tumor response rate was 95.35%, with CR 18.60% (8/43 and PR 76.74% (33/43, respectively. The local control rates at 1, 2, 3, 5 years were 77.54%, 53.02%, 39.77%, and 15.46%, respectively, while the 1- and 2-year local control rates were 75% and 60% for tumor ≤3 cm; 84% and 71% for tumor sized 3~5 cm; 55% and 14.6% for tumor sized 5~7 cm; and 45%, 21% in those with tumor size of >7 cm. The overall survival rate at 1, 2, 3, 5 years were 92.04%, 78.04%, 62.76%, 42.61%, respectively. The toxicity of stereotactic radiation therapy was grade 1-2. Clinical stages were significantly important factor in local control of lung tumors (P = 0.000. Both clinical stages (P = 0.015 and chemotherapy (P = 0.042 were significantly important factors in overall survival of lung tumors. Conclusion SBRT is an effective and safe therapy for medically inoperable patients with early stage NSCLC. Clinical stage was the significant prognostic factors for both local tumor control and overall survival. The toxicity is mild. The overall local control for bulky tumors is poor. Tumor size is a poor prognostic factor, and the patients for

Ancestral polymorphisms and sex-biased migration shaped the demographic history of brown bears and polar bears.

Directory of Open Access Journals (Sweden)

Shigeki Nakagome

Full Text Available Recent studies have reported discordant gene trees in the evolution of brown bears and polar bears. Genealogical histories are different among independent nuclear loci and between biparentally inherited autosomal DNA (aDNA and matrilineal mitochondrial DNA (mtDNA. Based on multi-locus genomic sequences from aDNA and mtDNA, we inferred the population demography of brown and polar bears and found that brown bears have 6 times (aDNA or more than 14 times (mtDNA larger population sizes than polar bears and that polar bear lineage is derived from within brown bear diversity. In brown bears, the effective population size ratio of mtDNA to aDNA was at least 0.62, which deviated from the expected value of 0.25, suggesting matriarchal population due to female philopatry and male-biased migration. These results emphasize that ancestral polymorphisms and sex-biased migration may have contributed to conflicting branching patterns in brown and polar bears across aDNA genes and mtDNA.

Ancestral polymorphisms and sex-biased migration shaped the demographic history of brown bears and polar bears.

Science.gov (United States)

Nakagome, Shigeki; Mano, Shuhei; Hasegawa, Masami

2013-01-01

Recent studies have reported discordant gene trees in the evolution of brown bears and polar bears. Genealogical histories are different among independent nuclear loci and between biparentally inherited autosomal DNA (aDNA) and matrilineal mitochondrial DNA (mtDNA). Based on multi-locus genomic sequences from aDNA and mtDNA, we inferred the population demography of brown and polar bears and found that brown bears have 6 times (aDNA) or more than 14 times (mtDNA) larger population sizes than polar bears and that polar bear lineage is derived from within brown bear diversity. In brown bears, the effective population size ratio of mtDNA to aDNA was at least 0.62, which deviated from the expected value of 0.25, suggesting matriarchal population due to female philopatry and male-biased migration. These results emphasize that ancestral polymorphisms and sex-biased migration may have contributed to conflicting branching patterns in brown and polar bears across aDNA genes and mtDNA.

Bearing for liquid metal pump

International Nuclear Information System (INIS)

Dickinson, R.J.; Pennell, W.E.; Wasko, J.

1984-01-01

A liquid metal pump bearing support comprises a series of tangentially oriented spokes that connect the bearing cylinder to the pump internals structure. The spokes may be arranged in a plurality of planes extending from the bearing cylinder to the pump internals with the spokes in one plane being arranged alternately with those in the next plane. The bearing support structure provides the pump with sufficient lateral support for the bearing structure together with the capability of accommodating differential thermal expansion without adversely affecting pump performance

Ultra-precision bearings

CERN Document Server

Wardle, F

2015-01-01

Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

Watchable Wildlife: The Black Bear

Science.gov (United States)

Lynn L. Rogers

1992-01-01

Black bears are the bears people most often encounter. Black bears live in forests over much of North America, unlike grizzlies that live only in Alaska, northern and western Canada, and the northern Rocky Mountains. This brochure presents the latest information on black bear life and how this species responds to an ever-increasing number of campers, hikers, and...

Study on effect of substituents in α positron of N,N-diethylamides by nuclear magnetic resonance

International Nuclear Information System (INIS)

Martins, M.A.P.

1982-01-01

The effect of a substituent in the α position of some N,N-diethylamides, through the 1 H and 13 C n.m.r. spectroscopy is studied. Eight N,N-diethylamides having the structure: Y-CH 2 -C(O) - NEt 2 , where Y=H, Me, Cl, Br, I, OMe, SMe, and NMe 2 were prepared by usual procedures; all these compounds were characterized by their 1 H and 13 C n.m.r. and infrared spectra, as well as by their elementary analysis. (M.J.C.) [pt

Active magnetic bearings used as exciters for rolling element bearing outer race defect diagnosis.

Science.gov (United States)

Xu, Yuanping; Di, Long; Zhou, Jin; Jin, Chaowu; Guo, Qintao

2016-03-01

The active health monitoring of rotordynamic systems in the presence of bearing outer race defect is considered in this paper. The shaft is assumed to be supported by conventional mechanical bearings and an active magnetic bearing (AMB) is used in the mid of the shaft location as an exciter to apply electromagnetic force to the system. We investigate a nonlinear bearing-pedestal system model with the outer race defect under the electromagnetic force. The nonlinear differential equations are integrated using the fourth-order Runge-Kutta algorithm. The simulation and experimental results show that the characteristic signal of outer race incipient defect is significantly amplified under the electromagnetic force through the AMBs, which is helpful to improve the diagnosis accuracy of rolling element bearing׳s incipient outer race defect. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Temperature and pressure variations of d-d luminescence band maxima of bis(pyridylalkenolato)palladium(II) complexes with different ligand substituents: opposite-signed trends.

Science.gov (United States)

Poirier, Stéphanie; Czympiel, Lisa; Bélanger-Desmarais, Nicolas; Mathur, Sanjay; Reber, Christian

2016-04-21

Luminescence spectra of two d(8)-configured bis(pyridylalkenolato)palladium(ii) complexes, [Pd{PyCHC(C3F7)O}2] and [Pd{PyCHC(CH3)O}2], are presented at variable temperature and pressure. Bands are assigned as d-d transitions. The heptafluoropropyl and methyl substituents on the ligands have different steric demands, influencing luminescence spectra. Broad bands with maxima at approximately 12 700 cm(-1) (790 nm) for ligands with heptafluoropropyl substituents and 12,100 cm(-1) (830 nm) for ligands with methyl substituents and widths of approximately 2100 cm(-1) for both complexes are observed at 80 K. Quenching of the luminescence is observed as temperature increases. The maxima of [Pd{PyCHC(C3F7)O}2] show a shift of -0.9 ± 0.1 cm(-1) K(-1) due to broadening of the spectra to lower energy. The luminescence maxima of [Pd{PyCHC(CH3)O}2] shift in the opposite direction by +7.2 ± 0.7 cm(-1) K(-1). Shifts with different signs are also obtained from variable-pressure luminescence spectra, with values of +13 ± 2 cm(-1) kbar(-1) and -15 ± 7 cm(-1) kbar(-1) for [Pd{PyCHC(C3F7)O}2] and [Pd{PyCHC(CH3)O}2], respectively. The pressure-induced decrease is unusual and likely caused by intermolecular interactions involving the palladium(ii) center and a vinylic proton of a neighboring complex.

A phase I-II trial of multimodality management of bulky gynecologic malignancy. Combined chemoradiosensitization and radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Kersh, C.R.; Constable, W.C.; Spaulding, C.A.; Hahn, S.S.; Andersen, W.A.; Taylor, P.T. (Univ. of Virginia Health Sciences Center, Charlottesville (USA))

1990-07-01

Between December 1983 and December 1987, there were 44 patients with bulky, nonresectable squamous cell carcinomas of the gynecologic tract (cervix, 36; vagina, eight) who were treated with concomitant chemotherapy and radiotherapy. Chemotherapy consisted of 5-fluorouracil (5-FU) 1g/m2 given by continuous intravenous infusion on days 1 through 4 and mitomycin C 10 mg/m2 given intravenously on day 1. External-beam irradiation was started on day 1 with a total calculated dose of 5000 cGy in 25 fractions employed. This was followed by brachytherapy. With a mean follow-up of 30.3 months and a median of 28 months, local control has been achieved in 32 of 44 patients (73%). The overall response rate was 88% (3-month partial response, 43%; 3-month complete response, 45%; 8-month partial response, 15%; 8-month complete response, 73%). Analysis of complications by Radiation Therapy Oncology Group (RTOG) criteria did not demonstrate an increase in acute or late complications.

Assessment of the cryoprotectant concentration inside a bulky organ for cryopreservation using X-ray computed tomography.

Science.gov (United States)

Corral, Ariadna; Balcerzyk, Marcin; Parrado-Gallego, Ángel; Fernández-Gómez, Isabel; Lamprea, David R; Olmo, Alberto; Risco, Ramón

2015-12-01

Cryoprotection of bulky organs is crucial for their storage and for subsequent transplantation. In this work we demonstrate the capability of the X-ray computed tomography (CT) as a non-invasive method to measure the cryoprotectant (cpa) concentration inside a tissue or an organ, specifically for the case of dymethil sulfoxide (Me2SO). It is remarkable that the use of Me2SO has been leader in techniques of cells and tissues cryopreservation. Although CT technologies are mainly based in density differences, and many cpas are alcohols with densities similar to water, the use of very low energies as acceleration voltage (∼70 kV) and the sulfur atom in the molecule of Me2SO makes possible the visualization of this cpa inside tissues. As result we obtain a CT signal proportional to the Me2SO concentration with a spatial resolution up to 50 μm in the case of our device. Copyright © 2015 Elsevier Inc. All rights reserved.

Influence of polyether ring size and of the nature of substituents on the yields of paramagnetic centers in γ-irradiated mono- and dibenzosubstituted crown ethers at 77 K

International Nuclear Information System (INIS)

Nesterov, S.V.; Panov, O.Yu.

1998-01-01

Intermediates stabilized in γ-irradiated mono- and dibenzosubstituted crown ethers are studied by ESR spectroscopy at 77 K. PhO · radicals and radicals with H-atom abstraction from polyether ring are the main products at low temperature γ-radiolysis. The nature of radicals produced in radiolysis and the yield of radicals, G R , depend on macroring size and on the number of aromatic substituents. Negative deviation from additive rule in function of G R versus ε of substituents is an evidence of efficient transfer of adsorbed energy to the π-system of aromatic group. (author)

Interchain interactions in charged diacetylenic oligomers carrying bulk substituents revisited

International Nuclear Information System (INIS)

Ottonelli, M.; Izzo, G.M.M.; Comoretto, D.; Musso, G.F.; Dellepiane, G.

2006-01-01

We are studying how the electronic properties of an aggregate, built with conjugated oligomers carrying bulk substituents, are affected by intermolecular interactions. In this paper we apply the CEO (Collective Electronic Oscillator) method, on the basis of the semiempirical INDO/S Hamiltonian, to compute the electronic density matrix modifications following the photon absorption in a doubly charged cluster of two units of a fully carbazolyl-substituted oligodiacetylene tetramer, taken as a model system. The picture that had emerged from our previous calculations based on the less sophisticated CIS (Configuration Interaction including Singles) approach is seen to be confirmed. Despite the large separation between the backbones, a through-space charge transfer occurs between the two oligomers due to the fact that the excess charge, contrary to what is generally believed, is not localized on the conjugated backbone, but is spread out over the carbazolyl moieties of the charged molecule. Consideration of this kind of interaction improves the theoretical results obtained for the isolated charged oligomer chain, and aids in better explaining some features of the experimental photoinduced spectra of the corresponding polymer

Genomic Evidence of Widespread Admixture from Polar Bears into Brown Bears during the Last Ice Age.

Science.gov (United States)

Cahill, James A; Heintzman, Peter D; Harris, Kelley; Teasdale, Matthew D; Kapp, Joshua; Soares, Andre E R; Stirling, Ian; Bradley, Daniel; Edwards, Ceiridwen J; Graim, Kiley; Kisleika, Aliaksandr A; Malev, Alexander V; Monaghan, Nigel; Green, Richard E; Shapiro, Beth

2018-05-01

Recent genomic analyses have provided substantial evidence for past periods of gene flow from polar bears (Ursus maritimus) into Alaskan brown bears (Ursus arctos), with some analyses suggesting a link between climate change and genomic introgression. However, because it has mainly been possible to sample bears from the present day, the timing, frequency, and evolutionary significance of this admixture remains unknown. Here, we analyze genomic DNA from three additional and geographically distinct brown bear populations, including two that lived temporally close to the peak of the last ice age. We find evidence of admixture in all three populations, suggesting that admixture between these species has been common in their recent evolutionary history. In addition, analyses of ten fossil bears from the now-extinct Irish population indicate that admixture peaked during the last ice age, whereas brown bear and polar bear ranges overlapped. Following this peak, the proportion of polar bear ancestry in Irish brown bears declined rapidly until their extinction. Our results support a model in which ice age climate change created geographically widespread conditions conducive to admixture between polar bears and brown bears, as is again occurring today. We postulate that this model will be informative for many admixing species pairs impacted by climate change. Our results highlight the power of paleogenomics to reveal patterns of evolutionary change that are otherwise masked in contemporary data.

Scaling laws for radial foil bearings

Science.gov (United States)

Honavara Prasad, Srikanth

The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

Bears and pipeline construction in Alaska

Energy Technology Data Exchange (ETDEWEB)

Follmann, E.H.; Hechtel, J.L. (Univ. of Alaska Fairbanks, AK (USA))

1990-06-01

Serious problems were encountered with bears during construction of the 1274-km trans-Alaska oil pipeline between Prudhoe Bay and Valdez. This multi-billion-dollar project traversed both black bear (Ursus americanus Pallas) and grizzly bear (U. arctos L.) habitat throughtout its entire length. Plans for dealing with anticipated problems with bears were often inadequate. Most (71%) problems occurred north of the Yukon River in a previously roadless wilderness where inadequate refuse disposal and widespread animal feeding created dangerous situations. Of the 192 officially reported bear problems associated with the Trans-Alaska Pipeline System (TAPS) (1971-1979), about 65% involved the presence of bears in camps or dumps, 13% the feeding of bears on garbage or handouts, 10% property damage or economic loss, 7% bears under and in buildings, and only 5% charges by bears. Remarkably, no bear-related injuries were reported, suggesting that bears became accustomed to people and did not regard them as a threat. Following construction of the TAPS there have been proposals for pipelines to transport natural gas from Prudhoe Bay to southern and Pacific-rim markets. Based on past experience, some animal control measures were developed during the planning phase for the authorized gas pipeline route in Alaska. Fences installed around 100-person survey camps were found to be effective in deterring bears in two traditionally troublesome areas. 16 refs., 7 figs., 1 tab.

Computational design of rolling bearings

CERN Document Server

Nguyen-Schäfer, Hung

2016-01-01

This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

Dual fluorescence of excited state intra-molecular proton transfer of HBFO: mechanistic understanding, substituent and solvent effects.

Science.gov (United States)

Yang, Wenjing; Chen, Xuebo

2014-03-07

A combined approach of the multiconfigurational perturbation theory with the Rice-Ramsperger-Kassel-Marcus methodology has been employed to calculate the minimum potential energy profiles and the rates of excited state intra-molecular proton transfer (ESIPT) for the WOLED material molecule of HBFO and its four meta- or para-substituted compounds in gas phase, acetonitrile and cyclohexane solvents. The kinetic control for these reactions is quantitatively determined and extensively studied on the basis of the accurate potential energy surfaces when the thermodynamic factor associated with the free energy change becomes negligible in the case of the existence of a significant barrier in the ESIPT process. These computational efforts contribute to a deep understanding of the ESIPT mechanism, dual emission characteristics, kinetic controlling factor, substituent and solvent effects for these material molecules. The white light emission is generated by the establishment of dynamic equilibrium between enol and keto forms in the charge transfer excited SCT((1)ππ*) state. The performance of white light emission is quantitatively demonstrated to be mainly sensitive to the molecular tailoring approach of the electronic properties of meta- or para- substituents by the modulation of the forward/backward ESIPT rate ratio. The quality of white light emission is slightly tunable through its surrounding solvent environment. These computational results will provide a useful strategy for the molecular design of OLED and WOLED materials.

The use of double-decker catcher bearing with face-to-face installed inner layer bearings

Science.gov (United States)

Zhu, Yi-Li; Zheng, Zhong-Qiao

2017-07-01

In active magnetic bearing (AMB) system, the catcher bearings (CB) are indispensable to temporarily support the rotor from directly impacting the stators. In most cases, traditional CB cannot bear the ultra-high speed, vibrations and impacts after a rotor drop event. To address the shortcomings, a double-decker ball bearing (DDBB) with inner two face-to-face angular contact ball bearings are proposed to be used as CB in an AMB system, and the dynamic response of the rotor after a rotor drop event is experimentally analyzed. The results indicate that using a DDBB as a CB helps to reduce the following collision forces after a rotor drop. Larger ball initial contact angles and smaller pre-load force on the inner layer bearings, larger radial clearance of the outer layer bearing and choosing AISI 10AISI 1045 steel which has a larger density for the adapter ring can effectively reduce the maximum impact force after a rotor drop event.

Polar bears, Ursus maritimus

Science.gov (United States)

Rode, Karyn D.; Stirling, Ian

2017-01-01

Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

Acoustic Emission Monitoring of Incipient in Journal Bearings - Part I : Detectability and measurement for bearing damages

International Nuclear Information System (INIS)

Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa; Kim, Kyung Woong

1994-01-01

In contrast to the machinery using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings

Migration and clinical outcome of mobile-bearing versus fixed-bearing single-radius total knee arthroplasty.

Science.gov (United States)

Van Hamersveld, Koen T; Marang-Van De Mheen, Perla J; Van Der Heide, Huub J L; Van Der Linden-Van Der Zwaag, Henrica M J; Valstar, Edward R; Nelissen, Rob G H H

2018-04-01

Background and purpose - Mobile-bearing total knee prostheses (TKPs) were developed in the 1970s in an attempt to increase function and improve implant longevity. However, modern fixed-bearing designs like the single-radius TKP may provide similar advantages. We compared tibial component migration measured with radiostereometric analysis (RSA) and clinical outcome of otherwise similarly designed cemented fixed-bearing and mobile-bearing single-radius TKPs. Patients and methods - RSA measurements and clinical scores were assessed in 46 randomized patients at baseline, 6 months, 1 year, and annually thereafter up to 6 years postoperatively. A linear mixed-effects model was used to analyze the repeated measurements. Results - Both groups showed comparable migration (p = 0.3), with a mean migration at 6-year follow-up of 0.90 mm (95% CI 0.49-1.41) for the fixed-bearing group compared with 1.22 mm (95% CI 0.75-1.80) for the mobile-bearing group. Clinical outcomes were similar between groups. 1 fixed-bearing knee was revised for aseptic loosening after 6 years and 2 knees (1 in each group) were revised for late infection. 2 knees (1 in each group) were suspected for loosening due to excessive migration. Another mobile-bearing knee was revised after an insert dislocation due to failure of the locking mechanism 6 weeks postoperatively, after which study inclusion was preliminary terminated. Interpretation - Fixed-bearing and mobile-bearing single-radius TKPs showed similar migration. The latter may, however, expose patients to more complex surgical techniques and risks such as insert dislocations inherent to this rotating-platform design.

Zinc(II) catalyzed conversion of alkynes to vinyl triflates in the presence of silyl triflates.

Science.gov (United States)

Al-huniti, Mohammed H; Lepore, Salvatore D

2014-08-15

The conversion of alkynes to their corresponding vinyl triflates in the presence of stoichiometric TMS-triflate was greatly facilitated by the triflate salt of several transition metal catalysts most especially Zn(OTf)2. Products are formed in high regioselectivity under mild conditions. Internal alkynes bearing an aryl substituent afford vinyl triflates with a modest preference for the Z-isomer especially with larger substituents. A mechanism is put forward to explain the unique role of silicon in this system.

The influence of serum substituents on serum-free Vero cell conditioned culture media manufactured from Dulbecco's modified Eagle medium in mouse embryo culture.

Science.gov (United States)

Lee, Jong-Seon; Kim, Ju-Hwan; Seo, Young-Seok; Yang, Jung-Bo; Kim, Yong-Il; Kim, Hye-Jin; Lee, Ki-Hwan

2013-09-01

This study was conducted to examine the influences of supplementation of the serum substituents and available period of serum-free Vero cell conditioned media (SF-VCM) manufactured from Dulbecco's modified Eagle medium cultured with Vero cells for in vitro development of mouse preimplantation embryos. A total of 1,099 two-cell embryos collected from imprinting control region mice were cultured in SF-VCM with 10% and 20% human follicular fluid (hFF), serum substitute supplement (SSS), and serum protein substitute (SPS). Development of embryos was observed every 24 hours. Results between different groups were analyzed by chi-square test, and considered statistically significant when P-value was less than 0.05. The rates of embryonic development cultured in SF-VCM supplemented with serum substituents were significantly higher compare with serum-free group (P media up to 4 weeks did not affect on embryonic development.

Electrochemistry of chromium(0)-aminocarbene complexes

International Nuclear Information System (INIS)

Hoskovcova, Irena; Rohacova, Jana; Meca, Ludek; Tobrman, Tomas; Dvorak, Dalimil; Ludvik, Jiri

2005-01-01

Two series of chromium(0)-(aryl)aminocarbene complexes substituted on the ligand phenyl ring were prepared and electrochemically investigated: pentacarbonyl((N,N-dimethylamino)(phenyl)carbene(chromium(0) (Ia-e) and chelated tetracarbonyl((η 2 -N-allyl-N-allylamino)(phenyl)carbene(chromium(0) (IIa, c-e). For comparison, a tungsten analogue of IIc (III) and a chromium chelate bearing a methyl substituent instead of the phenyl group IV were taken into the study. The intramolecular interactions of p-substituents on the ligand phenyl ring with the reduction and oxidation centres of the molecule of complex (followed electrochemically using LFER [P. Zuman, Substituent Effects in Organic Polarography, Plenum Press, New York, 1967]) enabled to localize the corresponding electron transfer. The influence of the type of coordination, the substituent on the ligand phenyl ring and the central metal atom on oxidation and reduction potentials is discussed

Ancient DNA reveals differences in behaviour and sociality between brown bears and extinct cave bears.

Science.gov (United States)

Fortes, Gloria G; Grandal-d'Anglade, Aurora; Kolbe, Ben; Fernandes, Daniel; Meleg, Ioana N; García-Vázquez, Ana; Pinto-Llona, Ana C; Constantin, Silviu; de Torres, Trino J; Ortiz, Jose E; Frischauf, Christine; Rabeder, Gernot; Hofreiter, Michael; Barlow, Axel

2016-10-01

Ancient DNA studies have revolutionized the study of extinct species and populations, providing insights on phylogeny, phylogeography, admixture and demographic history. However, inferences on behaviour and sociality have been far less frequent. Here, we investigate the complete mitochondrial genomes of extinct Late Pleistocene cave bears and middle Holocene brown bears that each inhabited multiple geographically proximate caves in northern Spain. In cave bears, we find that, although most caves were occupied simultaneously, each cave almost exclusively contains a unique lineage of closely related haplotypes. This remarkable pattern suggests extreme fidelity to their birth site in cave bears, best described as homing behaviour, and that cave bears formed stable maternal social groups at least for hibernation. In contrast, brown bears do not show any strong association of mitochondrial lineage and cave, suggesting that these two closely related species differed in aspects of their behaviour and sociality. This difference is likely to have contributed to cave bear extinction, which occurred at a time in which competition for caves between bears and humans was likely intense and the ability to rapidly colonize new hibernation sites would have been crucial for the survival of a species so dependent on caves for hibernation as cave bears. Our study demonstrates the potential of ancient DNA to uncover patterns of behaviour and sociality in ancient species and populations, even those that went extinct many tens of thousands of years ago. © 2016 John Wiley & Sons Ltd.

Non-contacting "snubber bearing" for passive magnetic bearing systems

Science.gov (United States)

Post, Richard F

2017-08-22

A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

Journal and Wave Bearing Impedance Calculation Software

Science.gov (United States)

Hanford, Amanda; Campbell, Robert

2012-01-01

The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

A 3D visualization of the substituent effect : A brief analysis of two components of the operational formula of dual descriptor for open-shell systems.

Science.gov (United States)

Martínez-Araya, Jorge I; Yepes, Diana; Jaque, Pablo

2017-12-27

Six organometallic compounds coming from a basic Mo-based complex were analyzed from the perspective of the dual descriptor in order to detect subtle influences that a substituent group could exert on the reactive core at a long range. Since the aforementioned complexes are open-shell systems, the used operational formula for the dual descriptor is that one defined for those aforementioned systems, which was then compared with spin density. In addition, dual descriptor was decomposed into two terms, each of which was also applied on every molecular system. The obtained results indicated that components of dual descriptor could become more useful than the operational formula of dual descriptor because differences exerted by the substituents at the para position were better detected by components of dual descriptor rather than the dual descriptor by itself.

Bears, Big and Little. Young Discovery Library Series.

Science.gov (United States)

Pfeffer, Pierre

This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

Synthesis and Antiplasmodial Activity of Novel Chloroquine Analogues with Bulky Basic Side Chains.

Science.gov (United States)

Tasso, Bruno; Novelli, Federica; Tonelli, Michele; Barteselli, Anna; Basilico, Nicoletta; Parapini, Silvia; Taramelli, Donatella; Sparatore, Anna; Sparatore, Fabio

2015-09-01

Chloroquine is commonly used in the treatment and prevention of malaria, but Plasmodium falciparum, the main species responsible for malaria-related deaths, has developed resistance against this drug. Twenty-seven novel chloroquine (CQ) analogues characterized by a side chain terminated with a bulky basic head group, i.e., octahydro-2H-quinolizine and 1,2,3,4,5,6-hexahydro-1,5-methano-8H-pyrido[1,2-a][1,5]diazocin-8-one, were synthesized and tested for activity against D-10 (CQ-susceptible) and W-2 (CQ-resistant) strains of P. falciparum. Most compounds were found to be active against both strains with nanomolar or sub-micromolar IC50 values. Eleven compounds were found to be 2.7- to 13.4-fold more potent than CQ against the W-2 strain; among them, four cytisine derivatives appear to be of particular interest, as they combine high potency with low cytotoxicity against two human cell lines (HMEC-1 and HepG2) along with easier synthetic accessibility. Replacement of the 4-NH group with a sulfur bridge maintained antiplasmodial activity at a lower level, but produced an improvement in the resistance factor. These compounds warrant further investigation as potential drugs for use in the fight against malaria. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bearing tester data compilation analysis, and reporting and bearing math modeling

Science.gov (United States)

Cody, J. C.

1986-01-01

Integration of heat transfer coefficients, modified to account for local vapor quality, into the 45 mm bearing model has been completed. The model has been evaluated with two flow rates and subcooled and saturated coolant. The evaluation showed that by increasing the flow from 3.6 to 7.0 lbs/sec the average ball temperature was decreased by 102 F, using a coolant temperature of -230 F. The average ball temperature was decreased by 63 F by decreasing the inlet coolant temperature from saturated to -230 F at a flow rate of 7.0 lbs/sec. Since other factors such as friction, cage heating, etc., affect bearing temperatures, the above bearing temperature effects should be considered as trends and not absolute values. The two phase heat transfer modification has been installed in the 57 mm bearing model and the effects on bearing temperatures have been evaluated. The average ball temperature was decreased by 60 F by increasing the flow rate from 4.6 to 9.0 lbs/sec for the subcooled case. By decreasing the inlet coolant temperature from saturation to -24 F, the average ball temperature was decreased 57 F for a flow rate of 9.0 lbs/sec. The technique of relating the two phase heat transfer coefficient to local vapor quality will be applied to the tester model and compared with test data.

Tribology of alternative bearings.

Science.gov (United States)

Fisher, John; Jin, Zhongmin; Tipper, Joanne; Stone, Martin; Ingham, Eileen

2006-12-01

The tribological performance and biological activity of the wear debris produced has been compared for highly cross-linked polyethylene, ceramic-on-ceramic, metal-on-metal, and modified metal bearings in a series of in vitro studies from a single laboratory. The functional lifetime demand of young and active patients is 10-fold greater than the estimated functional lifetime of traditional polyethylene. There is considerable interest in using larger diameter heads in these high demand patients. Highly cross-linked polyethylene show a four-fold reduction in functional biological activity. Ceramic-on-ceramic bearings have the lowest wear rates and least reactive wear debris. The functional biological activity is 20-fold lower than with highly cross-linked polyethylene. Hence, ceramic-on-ceramic bearings address the tribological lifetime demand of highly active patients. Metal-on-metal bearings have substantially lower wear rates than highly cross-linked polyethylene and wear decreases with head diameter. Bedding in wear is also lower with reduced radial clearance. Differential hardness ceramic-on-metal bearings and the application of ceramic-like coatings reduce metal wear and ion levels.

Journal bearing impedance descriptions for rotordynamic applications

NARCIS (Netherlands)

Childs, D.W.; Moes, H.; Leeuwen, van H.J.

1977-01-01

Bearing impedance vectors are introduced for plain journal bearings which define the bearing reaction force components as a function of the bearing motion. Impedance descriptions are developed directly for the approximate Ocvirk (short) and Sommerfeld (long) bearing solutions. The impedance vector

TOOL ASSEMBLY WITH BI-DIRECTIONAL BEARING

Science.gov (United States)

Longhurst, G.E.

1961-07-11

A two-direction motion bearing which is incorporated in a refueling nuclear fuel element trsnsfer tool assembly is described. A plurality of bi- directional bearing assembliesare fixed equi-distantly about the circumference of the transfer tool assembly to provide the tool assembly with a bearing surface- for both axial and rotational motion. Each bi-directional bearing assembly contains a plurality of circumferentially bulged rollers mounted in a unique arrangement which will provide a bearing surface for rotational movement of the tool assembly within a bore. The bi-direc tional bearing assembly itself is capable of rational motion and thus provides for longitudinal movement of the tool assembly.

Estimating Wear Of Installed Ball Bearings

Science.gov (United States)

Keba, John E.; Mcvey, Scott E.

1993-01-01

Simple inspection and measurement technique makes possible to estimate wear of balls in ball bearing, without removing bearing from shaft on which installed. To perform measurement, one observes bearing cage while turning shaft by hand to obtain integral number of cage rotations and to measure, to nearest 2 degrees, number of shaft rotations producing cage rotations. Ratio between numbers of cages and shaft rotations depends only on internal geometry of bearing and applied load. Changes in turns ratio reflect changes in internal geometry of bearing provided measurements made with similar bearing loads. By assuming all wear occurs on balls, one computes effective value for this wear from change in turns ratio.

Noise of oil lubricated journal bearings

International Nuclear Information System (INIS)

Rho, Byoung Hoo; Kim, Kyung Woong

2002-01-01

The purpose of the paper is to provide a procedure to calculate the noise of oil lubricated journal bearings. To do this, the nonlinear transient analysis of rotor-bearing system including rotor imbalance is performed. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Furthermore, a transmission theory of plane waves on a boundary of the outer surface of the bearing is used to obtain the sound pressure level of the bearing. Results show that the sound pressure level of the bearing can be increased with the rotational speed of the rotor although the whirl amplitude of the rotor is decreased at high speed. Noise estimating procedures presented in this paper could be an aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

Grizzly bears (Ursus arctos horribilis) and black bears (Ursus americanus) prevent trabecular bone loss during disuse (hibernation).

Science.gov (United States)

McGee-Lawrence, Meghan E; Wojda, Samantha J; Barlow, Lindsay N; Drummer, Thomas D; Castillo, Alesha B; Kennedy, Oran; Condon, Keith W; Auger, Janene; Black, Hal L; Nelson, O Lynne; Robbins, Charles T; Donahue, Seth W

2009-12-01

Disuse typically causes an imbalance in bone formation and bone resorption, leading to losses of cortical and trabecular bone. In contrast, bears maintain balanced intracortical remodeling and prevent cortical bone loss during disuse (hibernation). Trabecular bone, however, is more detrimentally affected than cortical bone in other animal models of disuse. Here we investigated the effects of hibernation on bone remodeling, architectural properties, and mineral density of grizzly bear (Ursus arctos horribilis) and black bear (Ursus americanus) trabecular bone in several skeletal locations. There were no differences in bone volume fraction or tissue mineral density between hibernating and active bears or between pre- and post-hibernation bears in the ilium, distal femur, or calcaneus. Though indices of cellular activity level (mineral apposition rate, osteoid thickness) decreased, trabecular bone resorption and formation indices remained balanced in hibernating grizzly bears. These data suggest that bears prevent bone loss during disuse by maintaining a balance between bone formation and bone resorption, which consequently preserves bone structure and strength. Further investigation of bone metabolism in hibernating bears may lead to the translation of mechanisms preventing disuse-induced bone loss in bears into novel treatments for osteoporosis.

Prevalence of Trichinella spp. in black bears, grizzly bears, and wolves in the Dehcho Region, Northwest Territories, Canada, including the first report of T. nativa in a grizzly bear from Canada.

Science.gov (United States)

Larter, Nicholas C; Forbes, Lorry B; Elkin, Brett T; Allaire, Danny G

2011-07-01

Samples of muscle from 120 black bears (Ursus americanus), 11 grizzly bears (Ursus arctos), and 27 wolves (Canis lupus) collected in the Dehcho Region of the Northwest Territories from 2001 to 2010 were examined for the presence of Trichinella spp. larvae using a pepsin-HCl digestion assay. Trichinella spp. larvae were found in eight of 11 (73%) grizzly bears, 14 of 27 (52%) wolves, and seven of 120 (5.8%) black bears. The average age of positive grizzly bears, black bears, and wolves was 13.5, 9.9, and approximately 4 yr, respectively. Larvae from 11 wolves, six black bears, and seven grizzly bears were genotyped. Six wolves were infected with T. nativa and five with Trichinella T6, four black bears were infected with T. nativa and two with Trichinella T6, and all seven grizzly bears were infected with Trichinella T6 and one of them had a coinfection with T. nativa. This is the first report of T. nativa in a grizzly bear from Canada. Bears have been linked to trichinellosis outbreaks in humans in Canada, and black bears are a subsistence food source for residents of the Dehcho region. In order to assess food safety risk it is important to monitor the prevalence of Trichinella spp. in both species of bear and their cohabiting mammalian food sources.

Hydrostatic and hybrid bearing design

CERN Document Server

Rowe, W B

1983-01-01

Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

49 CFR 229.69 - Side bearings.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Side bearings. 229.69 Section 229.69....69 Side bearings. (a) Friction side bearings with springs designed to carry weight may not have more than 25 percent of the springs in any one nest broken. (b) Friction side bearings may not be run in...

Lewis base activation of Lewis acids: catalytic, enantioselective addition of glycolate-derived silyl ketene acetals to aldehydes.

Science.gov (United States)

Denmark, Scott E; Chung, Won-Jin

2008-06-20

A catalytic system involving silicon tetrachloride and a chiral, Lewis basic bisphosphoramide catalyst is effective for the addition of glycolate-derived silyl ketene acetals to aldehydes. It was found that the sense of diastereoselectivity could be modulated by changing the size of the substituents on the silyl ketene acetals. In general, the trimethylsilyl ketene acetals derived from methyl glycolates with a large protecting group on the alpha-oxygen provide enantiomerically enriched alpha,beta-dihydroxy esters with high syn-diastereoselectivity, whereas the tert-butyldimethylsilyl ketene acetals derived from bulky esters of alpha-methoxyacetic acid provide enantiomerically enriched alpha,beta-dihydroxy esters with high anti-diastereoselecitvity.

Application of the Fenske-Hall molecular orbital method to the calculation of 11B NMR chemical shifts. Antipodal substituent effects in deltahedral clusters

International Nuclear Information System (INIS)

Fehlner, T.P.; Czech, P.T.; Fenske, R.F.

1990-01-01

Utilizing Fenske-Hall wave functions and eigenvalues combined with the Ramsey sum over states (SOS) approximation, it is demonstrated that the sign and magnitude of the paramagnetic contribution to the shielding correlates well with the observed 11 B chemical shifts of a substantial variety of boron- and metal-containing compounds. Analysis of the molecular orbital (MO) contributions in the SOS approximation leads to an explanation of the large downfield shifts associated with metal-rich metallaboranes. A similar analysis demonstrates the importance of selected cluster occupied and unoccupied MO's in explaining both exo-cage substituent effects in which the antipodal boron resonance is shifted upfield and endo-cage substituent effects (interchange of isolobal fragments within the cage framework) in which the antipodal boron resonance is shifted downfield. Exo- and endo-cage substitution perturbs these MO's in an understandable fashion, leading to an internally consistent explanation of the observed chemical shift changes. 36 refs., 8 figs., 4 tabs

Crystal structure of 4-tert-butyl-2-{2-[N-(3,3-dimethyl-2-oxobutyl-N-isopropylcarbamoyl]phenyl}-1-isopropyl-1H-imidazol-3-ium perchlorate

Directory of Open Access Journals (Sweden)

Olga V. Hordiyenko

2015-02-01

Full Text Available In the title salt, C26H40N3O2+·ClO4−, the positive charge of the organic cation is delocalized between the two N atoms of the imidazole ring. The C...;N bond distances are 1.338 (2 and 1.327 (3 Å. The substituents on the benzene ring are rotated almost orthogonal with respect to this ring due to the presence of the bulky isopropyl substituents. The dihedral angle between the benzene and imidazole rings is 75.15 (12°. Three of the O atoms of the anion are disordered over two sets of sites due to rotation around one of the O—Cl bonds. The ratio of the refined occupancies is 0.591 (14:0.409 (14. In the crystal, the cation and perchlorate anion are bound by an N—H...O hydrogen bond. In addition, the cation–anion pairs are linked into layers parallel to (001 by multiple weak C—H...O hydrogen bonds.

Electron beam melting of bearing materials

Energy Technology Data Exchange (ETDEWEB)

Goldschmied, G.; Schuler, A. (Technische Univ., Vienna (Austria). Inst. fuer Allgemeine Elektrotechnik); Elsinger, G.; Koroschetz, F. (MIBA Gleitlager AG, Laakirchen (Austria)); Tschegg, E.K. (Technische Univ., Vienna (Austria). Inst. fuer Angewandte und Technische Physik)

1990-06-01

This paper reports on a surface treatment method for the bearing materials AlSn6 which permits the use of this material without the overlay usually required. Microstructural refinement is achieved by means of a surface melting technique using an electron beam with successive rapid solidification. Extremely fine tin precipitates are formed in the melted surface layer which lead to significantly better tribological properties of the bearing material. Tests compared the tribological properties for AlSn6 bearings treated by the surface melting technique with those of untreated bearings. Whereas all untreated bearings failed by seizure after only 2 h of testing, 30% of the tested bearings which had been surface melted survived the entire testing program without damage.

Flywheel Challenge: HTS Magnetic Bearing

International Nuclear Information System (INIS)

Werfel, F N; Floegel-Delor, U; Riedel, T; Rothfeld, R; Wippich, D; Goebel, B

2006-01-01

A 200 mm cylindrical engineering prototype high temperature superconducting (HTS) was designed and fabricated. Measurements show that the 17 kg PM rotor can suspend safely 1000 kg in axial direction and 470 kg radially. The rationale for the bearing performance is to stabilize a 400 kg rotor of a new compact 5 kWh/280 kW flywheel energy storage system (COM - FESS). Measurements of the magnetic bearing force, stiffness and drag-torque are presented indicated the successful targeting a milestone in the HTS bearing technology. The influence of the PM configuration and the YBCO temperature on the bearing performance was experimentally studied, providing high-force or high-stiffness behaviour. The axial stiffness 5 kN/mm at 0.5 mm displacement is the highest value of a HTS bearing we know

Eastern slopes grizzly bear project

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-01-01

The cumulative effects of human activities on the grizzly bears in the central Canadian Rockies are not well known. As a result, a project was initiated in 1994 to address the urgent requirement for accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of this study will be used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers are monitoring 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers involved in the project are working with representatives from Husky Oil and Talisman Energy on the sound development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over seven years indicated that the grizzly bears have few and infrequent offspring. Using the information gathered so far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears recover very slowly from high mortality, and also considering that the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The status of the population and habitat of the grizzly bear will be assessed upon the conclusion of the field research phase in 2001. Models will be updated using the data obtained during eight years and will assist in the understanding of complex variables that affect grizzly bears.

The structural requirements of organophosphorus insecticides (OPI) for reducing chicken embryo NAD(+) content in OPI-induced teratogenesis in chickens.

Science.gov (United States)

Seifert, Josef

2016-05-01

The objective of this study was to determine the structural requirements of organophosphorus insecticides (OPI) for reducing chicken embryo nicotinamide adenine dinucleotide (NAD(+)) content in OPI-induced teratogenesis and compare them with those needed for OPI inhibition of yolk sac membrane kynurenine formamidase (KFase), the proposed primary target for OPI teratogens in chicken embryos. The comparative molecular field analysis (COMFA) of three-dimensional quantitative structure-activity relationship (3D QSAR) revealed the electrostatic and steric fields as good predictors of OPI structural requirements to reduce NAD(+) content in chicken embryos. The dominant electrostatic interactions were localized at nitrogen-1, nitrogen-3, nitrogen of 2-amino substituent of the pyrimidinyl of pyrimidinyl phosphorothioates, and at the oxygen of crotonamide carbonyl in crotonamide phosphates. Bulkiness of the substituents at carbon-6 of the pyrimidinyls and/or N-substituents of crotonamides was the steric structural component that contributed to superiority of those OPI for reducing embryonic NAD(+) levels. Both electrostatic and steric requirements are similar to those defined in our previous study for OPI inhibition of chicken embryo yolk sac membrane KFase. The findings of this study provide another piece of evidence for the cause-and-effect relationship between yolk sac membrane KFase inhibition and reduced embryo NAD(+) content in NAD-associated OPI-induced teratogenesis in chickens. Copyright © 2015 Elsevier Inc. All rights reserved.

Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

Science.gov (United States)

Mukesh; Sharma, Lalit Kumar; Charoo, Samina Amin; Sathyakumar, Sambandam

2015-01-01

The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears) returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape.

Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

Directory of Open Access Journals (Sweden)

Mukesh

Full Text Available The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape.

The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence

OpenAIRE

Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S.

2018-01-01

Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use....

The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence

OpenAIRE

Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S.

2018-01-01

Species’ distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use....

Load responsive hydrodynamic bearing

Science.gov (United States)

Kalsi, Manmohan S.; Somogyi, Dezso; Dietle, Lannie L.

2002-01-01

A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

INVERSE ELECTRON TRANSFER IN PEROXYOXALATE CHEMIEXCITATION USING EASILY REDUCIBLE ACTIVATORS

NARCIS (Netherlands)

Bartoloni, Fernando Heering; Monteiro Leite Ciscato, Luiz Francisco; Augusto, Felipe Alberto; Baader, Wilhelm Josef

2010-01-01

INVERSE ELECTRON TRANSFER IN PEROXYOXALATE CHEMIEXCITATION USING EASILY REDUCIBLE ACTIVATORS. Chemiluminescence properties of the peroxyoxalate reaction in the presence of activators bearing electron withdrawing substituents were studied, to evaluate the possible occurrence of an inverse electron

Diet and Co-ecology of Pleistocene Short-Faced Bears and Brown Bears in Eastern Beringia

Science.gov (United States)

Matheus, Paul E.

1995-11-01

Carbon and nitrogen stable isotope analysis of fossil bone collagen reveals that Pleistocene short-faced bears ( Arctodus simus) of Beringia were highly carnivorous, while contemporaneous brown bears ( Ursus arctos) had highly variable diets that included varying amounts of terrestrial vegetation, salmon, and small amounts of terrestrial meat. A reconsideration of the short-faced bear's highly derived morphology indicates that they foraged as scavengers of widely dispersed large mammal carcasses and were simultaneously designed both for highly efficient locomotion and for intimidating other large carnivores. This allowed Arctodus to forage economically over a large home range and seek out, procure, and defend carcasses from other large carnivores. The isotope data and this reconstruction of Arctodus' foraging behavior refute the hypothesis that competition from brown bears was a significant factor in the extinction of short-faced bears.

Bearing Change to Metal-On-Polyethylene for Ceramic Bearing Fracture in Total Hip Arthroplasty; Does It Work?

Science.gov (United States)

Lee, Soong Joon; Kwak, Hong Suk; Yoo, Jeong Joon; Kim, Hee Joong

2016-01-01

We evaluated the short-term to midterm results of reoperation with bearing change to metal-on-polyethylene (MoP) after ceramic bearing fracture in ceramic-on-ceramic total hip arthroplasty. Nine third-generation ceramic bearing fractures (6 heads and 3 liners) were treated with bearing change to MoP. Mean age at reoperation was 52.7 years. Mean follow-up was 4.3 years. During follow-up, 2 of 3 liner-fractured hips and 1 of 6 head-fractured hips showed radiologic signs of metallosis and elevated serum chromium levels. Re-reoperation with bearing rechange to a ceramic head was performed for the hips with metallosis. One liner-fractured hip had periprosthetic joint infection. Dislocation occurred in 3 hips. From our experience, bearing change to MoP is not a recommended treatment option for ceramic bearing fracture in total hip arthroplasty. Copyright © 2016 Elsevier Inc. All rights reserved.

Seismic isolation rubber bearings for nuclear facilities

International Nuclear Information System (INIS)

Fujita, Takafumi

1991-01-01

This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial-stress-shear-strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of FBR plants. It also discusses the protection method against aging and the quality control which are important for implementation. (orig./HP)

Seismic isolation rubber bearings for nuclear facilities

International Nuclear Information System (INIS)

Fujita, Takafumi

1989-01-01

This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial stress-shear strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of fast breeder reactor (FBR) plants. The paper also discusses the protection method against aging and the quality control which are important for implementation

Space Station alpha joint bearing

Science.gov (United States)

Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

1987-01-01

Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

Reduced Bearing Excursion After Mobile-Bearing Unicompartmental Knee Arthroplasty is Associated With Poor Functional Outcomes.

Science.gov (United States)

Wahal, Naman; Gaba, Sahil; Malhotra, Rajesh; Kumar, Vijay; Pegg, Elise C; Pandit, Hemant

2018-02-01

A small proportion of patients with mobile unicompartmental knee arthroplasty (UKA) report poor functional outcomes in spite of optimal component alignment on postoperative radiographs. The purpose of this study is to assess whether there is a correlation between functional outcome and knee kinematics. From a cohort of consecutive cases of 150 Oxford medial UKA, patients with fair/poor functional outcome at 1-year postsurgery (Oxford Knee Score [OKS] bearing position with knee flexion angle. Mean OKS in the fair/poor group was 29.9 and the mean OKS in the good/excellent group was 41.1. The tibial slope, time taken to complete the exercises, and patellar tendon angle trend over the flexion range were similar in both the groups; however, bearing position and the extent of bearing excursion differed significantly. The total bearing excursion in the OKS bearing was positioned 1.7 mm more posterior on the tibia in the OKS bearing excursion and positioning, are associated with worse functional outcomes after mobile UKA. Copyright © 2017 Elsevier Inc. All rights reserved.

Rolling bearing analysis

CERN Document Server

Harris, Tedric A

2001-01-01

One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

Modeling of Hybrid Permanent Magnetic-Gas Bearings

DEFF Research Database (Denmark)

Morosi, Stefano; Santos, Ilmar

2009-01-01

Modern turbomachinery applications require nowadays ever-growing rotational speeds and high degree of reliability. It then becomes natural to focus the attention of the research to contact-free bearings elements. The present alternatives focus on gas lubricated journal bearings or magnetic bearings....... In the present paper, a detailed mathematical modeling of the gas bearing based on the compressible form of the Reynolds equation is presented. Perturbation theory is applied in order to identify the dynamic characteristic of the bearing. Due to the simple design of the magnetic bearings elements - being...... the rotor equilibrium position can be made independent on the rotational speed and applied load; it becomes function of the passive magnetic bearing offset. By adjusting the offset it is possible to significantly influence the dynamic coefficients of the hybrid bearing....

A motor with superconducting magnetic bearings

International Nuclear Information System (INIS)

Gladun, A.; Stoye, P.; Verges, P.; Gawalek, W.; Habisreuther, T.; Goernert, P.

1993-01-01

Superconducting bearings may be one of the most promising near term applications of HTSC. For use at liquid nitrogen temperature and below, they offer the advantage of lower energy consumption and higher reliability. Different bearing configurations have been proposed. But in order to substitute for conventional bearings a further increase in the critical current density of the superconductor and improved bearing concepts are necessary. For this it is necessary to take into account the peculiarities of the interaction between permanent magnets and bulk superconductors. As a contribution to this programme we present the model of a motor with superconducting magnetic bearings. (orig.)

Valve assembly having remotely replaceable bearings

International Nuclear Information System (INIS)

Johnson, E.R.; Tanner, D.E.

1980-01-01

A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings

Exo-π-bonding to an ortho-carborane hypercarbon atom : systematic icosahedral cage distortions reflected in the structures of the fluoro-, hydroxy- and amino-carboranes, 1-X-2-Ph-1,2-C2B10H10 (X = F, OH or NH2) and related anions.

OpenAIRE

Boyd, L.A.; Clegg, W.; Copley, R.C.B.; Davidson, M.G.; Fox, M.A.; Hibbert, T.G.; Howard, J.A.K.; Mackinnon, A.; Peace, R.J.; Wade, K.

2004-01-01

The structures of derivatives of phenyl-ortho-carborane bearing on the second cage hypercarbon atom a pi-donor substituent (F, OH, O-, NH2, NH- and CH2-) were investigated by NMR, X-ray crystallography and computational studies. The molecular structures of these compounds, notably their cage C1-C2 distances and the orientations of their pi-donor substituents (OH, NH2, NH- and CH2-) show remarkable and systematic variations with the degree of exo pi-bonding, which varies as expected with the p...

Studies of a series of [Ni(P(R)2N(Ph)2)2(CH3CN)]2+ complexes as electrocatalysts for H2 production: substituent variation at the phosphorus atom of the P2N2 ligand.

Science.gov (United States)

Kilgore, Uriah J; Stewart, Michael P; Helm, Monte L; Dougherty, William G; Kassel, W Scott; DuBois, Mary Rakowski; DuBois, Daniel L; Bullock, R Morris

2011-11-07

A series of [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes containing the cyclic diphosphine ligands [P(R)(2)N(Ph)(2) = 1,5-diaza-3,7-diphosphacyclooctane; R = benzyl (Bn), n-butyl (n-Bu), 2-phenylethyl (PE), 2,4,4-trimethylpentyl (TP), and cyclohexyl (Cy)] have been synthesized and characterized. X-ray diffraction studies reveal that the cations of [Ni(P(Bn)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) and [Ni(P(n-Bu)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) have distorted trigonal bipyramidal geometries. The Ni(0) complex [Ni(P(Bn)(2)N(Ph)(2))(2)] was also synthesized and characterized by X-ray diffraction studies and shown to have a distorted tetrahedral structure. These complexes, with the exception of [Ni(P(Cy)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2), all exhibit reversible electron transfer processes for both the Ni(II/I) and Ni(I/0) couples and are electrocatalysts for the production of H(2) in acidic acetonitrile solutions. The heterolytic cleavage of H(2) by [Ni(P(R)(2)N(Ph)(2))(2)(CH(3)CN)](BF(4))(2) complexes in the presence of p-anisidine or p-bromoaniline was used to determine the hydride donor abilities of the corresponding [HNi(P(R)(2)N(Ph)(2))(2)](BF(4)) complexes. However, for the catalysts with the most bulky R groups, the turnover frequencies do not parallel the driving force for elimination of H(2), suggesting that steric interactions between the alkyl substituents on phosphorus and the nitrogen atom of the pendant amines play an important role in determining the overall catalytic rate. © 2011 American Chemical Society

Transient response of two lobe aerodynamic journal bearing

Directory of Open Access Journals (Sweden)

Saurabh Kumar Yadav

2018-03-01

Full Text Available The dynamic behavior of a rotor-dynamic system is greatly affected by the performance of aerodynamic bearing and the performance of bearing is characterized by the stiffness and damping coefficients. In the present work, stiffness and damping coefficients of bearing are computed and the performance of the bearing is greatly changed with the change in bearing air film profile. The effect of lobe offset factors on the transient performance of aerodynamic bearing is presented. Bifurcation and Poincare diagrams of two lobe journal bearing have been presented for different offset factors. A bearing designer can judge the bearing performance based on bifurcation diagrams.

Servo Reduces Friction In Flexure Bearing

Science.gov (United States)

Clingman, W. Dean

1991-01-01

Proposed servocontrol device reduces such resistive torques as stiction, friction, ripple, and cogging in flexure bearing described in LAR-14348, "Flexure Bearing Reduces Startup Friction". Reduces frictional "bump" torque encountered when bearing ball runs into buildup of grease on bearing race. Also used as cable follower to reduce torque caused by cable and hoses when they bend because of motion of bearing. New device includes torquer across ball race. Torquer controlled by servo striving to keep flexure at null, removing torque to outer ring. In effect, device is inner control loop reducing friction, but does not control platforms or any outer-control-loop functions.

The effect of external dynamic loads on the lifetime of rolling element bearings: accurate measurement of the bearing behaviour

International Nuclear Information System (INIS)

Jacobs, W; Boonen, R; Sas, P; Moens, D

2012-01-01

Accurate prediction of the lifetime of rolling element bearings is a crucial step towards a reliable design of many rotating machines. Recent research emphasizes an important influence of external dynamic loads on the lifetime of bearings. However, most lifetime calculations of bearings are based on the classical ISO 281 standard, neglecting this influence. For bearings subjected to highly varying loads, this leads to inaccurate estimations of the lifetime, and therefore excessive safety factors during the design and unexpected failures during operation. This paper presents a novel test rig, developed to analyse the behaviour of rolling element bearings subjected to highly varying loads. Since bearings are very precise machine components, their motion can only be measured in an accurately controlled environment. Otherwise, noise from other components and external influences such as temperature variations will dominate the measurements. The test rig is optimised to perform accurate measurements of the bearing behaviour. Also, the test bearing is fitted in a modular structure, which guarantees precise mounting and allows testing different types and sizes of bearings. Finally, a fully controlled multi-axial static and dynamic load is imposed on the bearing, while its behaviour is monitored with capacitive proximity probes.

A prototype construction of bearing heater system

International Nuclear Information System (INIS)

Firman Silitonga

2007-01-01

A bearing heater system has been successfully constructed using transformer-like method of 1000 VA power, 220 V primary voltage, and 50 Hz electrical frequency. The bearing heater consists of primary coil 230 turns, U type and bar-type iron core with 36 cm 2 , 9 cm 2 ,and 3 cm 2 cross-section, and electrical isolation. The bearing heater is used to enlarge the diameter of the bearing so that it can be easily fixed on an electric motor shaft during replacement because the heating is conducted by treated the bearing as a secondary coil of a transformer. This bearing heater can be used for bearing with 3 and 6 cm of inner diameter and 12 cm of maximum outside diameter. (author)

Roller bearing geometry design

Science.gov (United States)

Savage, M.; Pinkston, B. H. W.

1976-01-01

A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

Gear bearing drive

Science.gov (United States)

Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor); Weinberg, Brian (Inventor)

2011-01-01

A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

The Effect of Non-Circular Bearing Shapes in Hydrodynamic Journal Bearings on the Vibration Behavior of Turbocharger Structures

Directory of Open Access Journals (Sweden)

Lukas Bernhauser

2017-03-01

Full Text Available Increasing quality demands of combustion engines require, amongst others, improvements of the engine’s acoustics and all (subcomponents mounted to the latter. A significant impact to the audible tonal noise spectrum results from the vibratory motions of fast-rotating turbocharger rotor systems in multiple hydrodynamic bearings such as floating bearing rings. Particularly, the study of self-excited non-linear vibrations of the rotor-bearing systems is crucial for the understanding, prevention or reduction of the noise and, consequently, for a sustainable engine acoustics development. This work presents an efficient modeling approach for the investigation, optimization, and design improvement of complex turbocharger rotors in hydrodynamic journal bearings, including floating bearing rings with circular and non-circular bearing geometries. The capability of tonal non-synchronous vibration prevention using non-circular bearing shapes is demonstrated with dynamic run-up simulations of the presented model. These findings and the performance of our model are compared and validated with results of a classical Laval/Jeffcott rotor-bearing model and a specific turbocharger model found in the literature. It is shown that the presented simulation method yields fast and accurate results and furthermore, that non-circular bearing shapes are an effective measure to reduce or even prevent self-excited tonal noise.

LIGHT-WEIGHT LOAD-BEARING STRUCTURE

DEFF Research Database (Denmark)

2009-01-01

The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

Development and Evaluation of Titanium Spacesuit Bearings

Science.gov (United States)

Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

2016-01-01

The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an

Leading research on supermetals. Part 1. Bulky material (iron system); Supermetal no sendo kenkyu. 1. Ogata sozai (tetsukei)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For further improvement of iron system materials, supermetals with ultimate characteristics were researched. Since their strength and toughness have been improved with grain refinement by thermomechanical treatment, improvement of single-phase steel is nearly completed, and the study on ultra-fine multi-phase steel is indispensable. Bulky materials are also restrained from grain refinement because of the capability of existing processing facilities. Making a breakthrough in such restraint requires a challenge to high-speed rolling, repeated shear deformation and ultra-high strain rate process beyond conventional technologies. Further improvement of microstructure and dynamic characteristics requires other energies such as magnetism as well as mechanical energy. {gamma}-{alpha} phase transition important for structure control of steel materials is dependent on magnetism. The study on structure control and characteristics improvement under ferromagnetic field is essential in the future. Material improvement such as reduction of impurities and circulating elements, environmental measures, and mechanical alloying remain as issues to be studied. 224 refs., 176 figs., 18 tabs.

The thermodynamic properties of a new type catcher bearing used in active magnetic bearings system

International Nuclear Information System (INIS)

Jin, Chaowu; Zhu, Yili; Xu, Longxiang; Xu, Yuanping; Zheng, Yantong

2015-01-01

Normally a rotor levitated by active magnetic bearings (AMBs) system would rotate without contacting with any stator component, but the possibility still remains that the supporting force might lose temporarily or permanently, thus requiring the Catcher bearings (CBs) to provide backup protection in case of the failure of AMBs. A new type CB with two separate rolling element bearing series could have the speed distribution between the inner race and intermediate race according to certain ratio, in which the speed of each roller element bearing decreases with the limit speed of the whole CB increasing, offering high capability to sustain its initial rotation speed. Based on the theory of heat transfer, tribology, and rotor dynamics, this paper analyzes the thermal structure of double-decker catcher bearing (DDCB) and single-decker catcher bearing (SDCB), respectively. Through this structure, the thermal resistances and equations of heat transfer can be obtained. Then we calculate the friction heat and temperature distribution in the various CBs upon rotor's dropping on SDCB or DDCB, followed by the discussion on the CBs temperature rise's effects on lubrication conditions and rotor dynamics parameters. Finally various experiments are carried out to measure the temperature rise of different CBs. The results obtained validate the theoretical analysis and also provide main methods to reduce heat generation. Using DDCB is proved to be effective to reduce the temperature rise. - Highlights: • The DDCB is a more suitable catcher bearing for AMBs. • Compared to SDCB, using DDCB, the temperature rise can decrease in the same states. • A lower viscosity of lubricant may induce a lower temperature rise. • The inner raceway temperature of the first layer bearing is the highest. • Reducing the unbalance mass of the rotor is a method to decrease the temperature rise

Noise estimation of oil lubricated journal bearings

International Nuclear Information System (INIS)

Rho, Byoung Hoo; Kim, Kyung Woong

2003-01-01

Noise estimating procedures of oil lubricated journal bearings are presented. Nonlinear analysis of rotor-bearing system including unbalance mass of the rotor is performed in order to obtain acoustical properties of the bearing. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Noise estimating procedures presented in this paper could aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

Exothermic or Endothermic Decomposition of Disubstituted Tetrazoles Tuned by Substitution Fashion and Substituents.

Science.gov (United States)

Jia, Yu-Hui; Yang, Kai-Xiang; Chen, Shi-Lu; Huang, Mu-Hua

2018-01-11

Nitrogen-rich compounds such as tetrazoles are widely used as candidates in gas-generating agents. However, the details of the differentiation of the two isomers of disubstituted tetrazoles are rarely studied, which is very important information for designing advanced materials based on tetrazoles. In this article, pairs of 2,5- and 1,5-disubstituted tetrazoles were carefully designed and prepared for study on their thermal decomposition behavior. Also, the substitution fashion of 2,5- and 1,5- and the substituents at C-5 position were found to affect the endothermic or exothermic properties. This is for the first time to the best of our knowledge that the thermal decomposition properties of different tetrazoles could be tuned by substitution ways and substitute groups, which could be used as a useful platform to design advanced materials for temperature-dependent rockets. The aza-Claisen rearrangement was proposed to understand the endothermic decomposition behavior.

Individual effects of seasonal changes, visitor density, and concurrent bear behavior on stereotypical behaviors in captive polar bears (Ursus maritimus).

Science.gov (United States)

Kelly, Krista R; Harrison, Michelle L; Size, Daniele D; MacDonald, Suzanne E

2015-01-01

Stereotypical behaviors in captive polar bears (Ursus maritimus) can be detrimental to their welfare. These behaviors can be reduced through enrichment programs but are often not completely eliminated, so identifying potential triggers is important. The present study investigated the influences of seasonal changes, visitor density, and concurrent bear activity on stereotypical behaviors exhibited by 3 captive polar bears at the Toronto Zoo. All bears exhibited these behaviors; however, individual differences were found in duration and form. The male exhibited less stereotypical behavior during spring, and the females exhibited less stereotypical behavior during winter. An increase in visitor density was associated with more stereotypical behavior in 1 female but less stereotypical behavior in the other 2 bears. All bears engaged in more stereotypical behaviors when the other bears were inactive, and 1 female engaged in more stereotypical behaviors when the other bears were out of sight. Further, when conspecifics were active, all bears engaged in less stereotypical behaviors. Given the variability among individual bears, future enrichment programs must be tailored to the needs of individuals to maximize efficacy.

49 CFR 229.64 - Plain bearings.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Plain bearings. 229.64 Section 229.64 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION....64 Plain bearings. A plain bearing box shall contain visible free oil and may not be cracked to the...

Efficient Syntheses of Novel Fluoro-Substituted Pentacenes and Azapentacenes: Molecular and Solid-State Properties.

Science.gov (United States)

Schwaben, Jonas; Münster, Niels; Klues, Michael; Breuer, Tobias; Hofmann, Philipp; Harms, Klaus; Witte, Gregor; Koert, Ulrich

2015-09-21

Non-symmetrical 6,13-disubstituted pentacenes bearing trifluoromethyl and aryl substituents have been synthesized starting from pentacenequinone. Diazapentacenes with a variety of fluorine substituents were prepared either via a Hartwig-Buchwald aryl amination route or by a SNAr strategy. As a result of a non-symmetric substitution pattern containing electron-donating substituents in combination with electron-accepting fluorine substituents, the synthesized compounds feature distinct molecular dipoles. All compounds are analyzed regarding their optoelectronic properties in solution with special focus on the frontier orbital energies as well as their molecular packing in the crystal structures. The analyses of isolated molecules are complemented by thin-film studies to examine their solid-state properties. A precise comparison between these and the molecular properties gave detailed insights into the exciton binding energies of these compounds, which are explained by means of a simple model considering the molecular packing and polarizabilities. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Liquid crystals with novel terminal chains as ferroelectric liquid crystal hosts

International Nuclear Information System (INIS)

Cosquer, G.Y.

2000-02-01

Changes to the molecular structure of liquid crystals can have a significant effect upon their mesomorphism and ferroelectric properties. Most of the research in liquid crystal for display applications concentrates on the design and synthesis of novel mesogenic cores to which straight terminal alkyl or alkoxy chains are attached. However, little is known about the effects upon the mesomorphism and ferroelectric properties of varying the terminal chains. The compounds prepared in this work have a common core - a 2,3-difluoroterphenyl unit with a nine-atom alkyl (nonyl) or alkoxy (octyloxy) chain at the 4-position, but with an unusual chain at the 4''-position. In some cases the terminal chain contains hetero atoms such as silicon, oxygen, chlorine and bromine or has a bulky end group. In total 46 final materials were synthesised in an attempt to understand the effect of an unusual terminal chains on mesomorphism and for some of these compounds the effect upon the switching times when added to a standard ferroelectric mixture were investigated. It was found that most compounds containing a bulky end group only displayed a smectic C phase, compounds with a halogen substituent as an end unit displayed a smectic A phase and that increasing the chain flexibility by introducing an oxygen atom in the chain reduces the melting and clearing points. The electro-optical measurements carried out on ferroelectric mixtures containing a bulky end group compound showed that shorter switching times were produced than for the ferroelectric mixture containing a straight chain compound. It is suggested that a bulky end group diminishes te extent of interlayer mixing in the chiral smectic C phase and therefore the molecules move more easily with ferroelectric switching. (author)

Ceramic Rail-Race Ball Bearings

Science.gov (United States)

Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

2010-01-01

Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

Identification of Bearing Failure Using Signal Vibrations

Science.gov (United States)

Yani, Irsyadi; Resti, Yulia; Burlian, Firmansyah

2018-04-01

Vibration analysis can be used to identify damage to mechanical systems such as journal bearings. Identification of failure can be done by observing the resulting vibration spectrum by measuring the vibration signal occurring in a mechanical system Bearing is one of the engine elements commonly used in mechanical systems. The main purpose of this research is to monitor the bearing condition and to identify bearing failure on a mechanical system by observing the resulting vibration. Data collection techniques based on recordings of sound caused by the vibration of the mechanical system were used in this study, then created a database system based bearing failure due to vibration signal recording sounds on a mechanical system The next step is to group the bearing damage by type based on the databases obtained. The results show the percentage of success in identifying bearing damage is 98 %.

Management of brown bears (Ursus arctos) in Europe.

OpenAIRE

Klenzendorf, Sybille A.

1997-01-01

Management of Brown Bears (Ursus arctos) in Europe. Sybille A. Klenzendorf (Abstract) Successful conservation of brown bears (Ursus arctos) in Europe is associated with public acceptance of damages caused by bears. Recent increases in sheep depredation and beehive damage in central Austria resulted in the deaths of two bears there. Since bear numbers are low in most European populations, alternatives to the elimination of problem bears associated with dam...

Conservation of brown bear in the Alps: space use and settlement behavior of reintroduced bears

Science.gov (United States)

Preatoni, Damiano; Mustoni, Andrea; Martinoli, Adriano; Carlini, Eugenio; Chiarenzi, Barbara; Chiozzini, Simonetta; Van Dongen, Stefan; Wauters, Luc A.; Tosi, Guido

2005-11-01

Large carnivores typically need large home ranges containing habitats patches of different quality. Consequently, their conservation requires habitat protection and management at the landscape scale. In some cases, reintroduction might be used to support remnant or restore extinct populations. This is the case for the brown bear ( Ursus arctos) in the Italian Alps. We monitored spacing behavior and settlement of reintroduced brown bears in Adamello-Brenta Natural Park, North-Italy, using radio-tracking. Habitat use, dispersion and survival were studied to evaluate the success of reintroduction and possible conflicts with man. All three males and five of seven females settled in the study area. Most bears roamed widely the first months after release, exploring the new habitat. Patterns of home range overlap between seasons and years revealed that home range use stabilized the year after first hibernation. Home ranges were larger in the mating season (May-July) than in spring or autumn. Home ranges varied between 34 and 1813 km 2 the year after release, but core-areas, where feeding activity was concentrated, were much smaller. Some bears had exclusive core-areas in summer and autumn, but most showed considerable core-area overlap with animals of the same and/or the opposite sex. Bears selected deciduous forests, mixed and conifer forests were used according to availability, and areas with anthropogenic disturbance were avoided. Most bears settled and some reproduced successfully at the release site, causing high initial population growth, suggesting that reintroduction can help to re-establish a brown bear population in the Italian Alps.

Difference of ore-bearing and non-ore-bearing pegmatite in the Guangshigou area and its research significance

International Nuclear Information System (INIS)

Zuo Wenqian; Zhang Zhanshi; Sha Yazhou; Rao Chaojun

2011-01-01

Guangshigou uranium deposit is one of the typical granite-pegmatite uranium deposits in China, the ore-body are located in the density zone of the outside contact zone of granite pluton. To distinguish the ore-bearing and Non-ore-bearing pegmatite is one of the most practices and have great significance for the effect of mineral exploration. Based on the field investigation and former research results, contrast research on the characteristics of the pegmatite on petrology, geophysical, geochemistry and stable isotopes have been carried out. It is pointed out that the ore-bearing pegmatite differ from the non-ore-bearing one from macro-and-micro-view in Guangshigou Uranium deposits, the main characteristics are summarized; the macro-and-micro signs are established, the genetic difference between the ore-bearing and non-ore-bearing pegmatite are discussed primarily. The achievements would be helpful for prospecting and researching of this type uranium deposits in China. (authors)

Accuracy of Spindle Units with Hydrostatic Bearings

Directory of Open Access Journals (Sweden)

Fedorynenko Dmytro

2016-06-01

Full Text Available The work is devoted to the research of precision regularities in a spindle unit by the trajectory of the spindle installed on hydrostatic bearings. The mathematical model of trajectories spindle with lumped parameters that allows to define the position of the spindle with regard the simultaneous influence of design parameters, geometrical deviations ofform, temperature deformation bearing surfaces, the random nature of operational parameters and technical loads of hydrostatic bearings has been developed. Based on the results of numerical modeling the influence of shape errors of bearing surface of hydrostatic bearing on the statistical characteristics of the radius vector trajectories of the spindle by varying the values rotational speed of the spindle and oil pressure in front hydrostatic bearing has been developed. The obtained statistical regularities of precision spindle unit have been confirmed experimentally. It has been shown that an effective way to increase the precision of spindle units is to regulate the size of the gap in hydrostatic spindle bearings. The new design of an adjustable hydrostatic bearing, which can improve the accuracy of regulation size gap has been proposed.

36 CFR 13.1236 - Bear orientation.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236 Section 13.1236 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear...

14 CFR 29.623 - Bearing factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 29.623 Section 29.623... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.623 Bearing factors. (a... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

[Advances in studies on bear bile powder].

Science.gov (United States)

Zhou, Chao-fan; Gao, Guo-jian; Liu, Ying

2015-04-01

In this paper, a detailed analysis was made on relevant literatures about bear bile powder in terms of chemical component, pharmacological effect and clinical efficacy, indicating bear bile powder's significant pharmacological effects and clinical application in treating various diseases. Due to the complex composition, bear bile powder is relatively toxic. Therefore, efforts shall be made to study bear bile powder's pharmacological effects, clinical application, chemical composition and toxic side-effects, with the aim to provide a scientific basis for widespread reasonable clinical application of bear bile powder.

Magnetically leviated superconducting bearing

Science.gov (United States)

Weinberger, Bernard R.; Lynds, Jr., Lahmer

1993-01-01

A magnetically levitated superconducting bearing includes a magnet (2) mounted on a shaft (12) that is rotatable around an axis of rotation and a Type II superconductor (6) supported on a stator (14) in proximity to the magnet (2). The superconductor (6) is positioned so that when it is cooled to its superconducting state in the presence of a magnetic field, it interacts with the magnet (2) to produce an attractive force that levitates the magnet (2) and supports a load on the shaft (12). The interaction between the superconductor (6) and magnet(2) also produces surface screening currents (8) that generate a repulsive force perpendicular to the load. The bearing also has means for maintaining the superconductor at a temperature below its critical temperature (16, 18). The bearing could also be constructed so the magnet (2) is supported on the stator (14) and the superconductor (6) is mounted on the shaft (12). The bearing can be operated by cooling the superconductor (6) to its superconducting state in the presence of a magnetic field.

Interaction of albumin with perylene-diimides with aromatic substituents

Science.gov (United States)

Farooqi, Mohammed; Penick, Mark; Burch, Jessica; Negrete, George; Brancaleon, Lorenzo

2015-03-01

Polyaromatic hydrocarbons (PAH) binding to proteins remains one of the fundamental aspects of research in biophysics. Ligand binding can regulate the function of proteins. Binding to small ligands remains a very important aspect in the study of the function of many proteins. Perylene diimide or PDI derivatives have attracted initial interest as industrial dyes and pigments. Recently, much attention has been focused on their strong π - π stacks resulting from the large PDI aromatic core. These PDI stacks have distinct optical properties, and provide informative models that mimic the light-harvesting system and initial charge separation and charge transfer in the photosynthetic system. The absorption property of PDI derivatives may be largely tuned from visible to near-infrared region by chemical modifications at the bay-positions. We are currently studying a new class of PDI derivatives with substituents made of the side chains of aromatic amino acids (Tyrosine, Tryptophan and Phenylalanine). We have looked at the fluorescence absorption and emission of these PDIs in water and other organic solvents. PDIs show evidence of dimerization and possible aggregation. We also present binding studies of these PDIs with Human Serum Albumin (HSA). The binding was studied using fluorescence emission quenching of the HSA Tryptophan residue. Stern-Volmer equation is used to derive the quenching constants. PDI binding to HSA also has an effect on the fluorescence emission of the PDIs themselves by red shifting the spectra. Funded by RCMI grant.

A theoretical-experimental study of backup bearings

DEFF Research Database (Denmark)

Lampe Linhares da Fonseca, Cesar Augusto

of two types of backup bearings, which are investigated experimentally and theoretically. The first type is a conventional ball bearing commonly used in industrial applications. The second is an unconventional bearing that, which contains pins inside the clearance for the rotor to impact on. The main...... both types of bearings for further investigation. Also, a full failure of the control and a rotor drop on the ball bearing as backup bearing is investigated by removing the magnetic forces. The nonlinear features of the dynamics of the rotor are assessed for different levels of unbalance. It has been...... radial forces. Remaining in this condition, it may lead to permanent damage or total failure of the machine. This is why the backup bearing design has to be carefully planned and investigated as to whether it helps to protect the integrity of the machine. This PhD thesis provides a comprehensive study...

Genomic sequencing of Pleistocene cave bears

Energy Technology Data Exchange (ETDEWEB)

Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

2005-04-01

Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

14 CFR 27.623 - Bearing factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 27.623 Section 27.623... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

14 CFR 25.623 - Bearing factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 25.623 Section 25.623... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

Grease lubrication in rolling bearings

CERN Document Server

Lugt, Piet M

2012-01-01

The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

Magnetic translator bearings

Science.gov (United States)

Hockney, Richard L. (Inventor); Downer, James R. (Inventor); Eisenhaure, David B. (Inventor); Hawkey, Timothy J. (Inventor); Johnson, Bruce G. (Inventor)

1990-01-01

A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.

Delayed child-bearing.

Science.gov (United States)

Johnson, Jo-Ann; Tough, Suzanne

2012-01-01

To provide an overview of delayed child-bearing and to describe the implications for women and health care providers. Delayed child-bearing, which has increased greatly in recent decades, is associated with an increased risk of infertility, pregnancy complications, and adverse pregnancy outcome. This guideline provides information that will optimize the counselling and care of Canadian women with respect to their reproductive choices. Maternal age is the most important determinant of fertility, and obstetric and perinatal risks increase with maternal age. Many women are unaware of the success rates or limitations of assisted reproductive technology and of the increased medical risks of delayed child-bearing, including multiple births, preterm delivery, stillbirth, and Caesarean section. This guideline provides a framework to address these issues. Studies published between 2000 and August 2010 were retrieved through searches of PubMed and the Cochrane Library using appropriate key words (delayed child-bearing, deferred pregnancy, maternal age, assisted reproductive technology, infertility, and multiple births) and MeSH terms (maternal age, reproductive behaviour, fertility). The Internet was also searched using similar key words, and national and international medical specialty societies were searched for clinical practice guidelines and position statements. Data were extracted based on the aims, sample, authors, year, and results. The quality of evidence was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). The Society of Obstetricians and Gynaecologists of Canada. RECOMMENDATIONS 1. Women who delay child-bearing are at increased risk of infertility. Prospective parents, especially women, should know that their fecundity and fertility begin to decline significantly after 32 years of age. Prospective parents should know that assisted reproductive technologies cannot guarantee a live birth or completely

Actuators for Active Magnetic Bearings

Directory of Open Access Journals (Sweden)

Eric H. Maslen

2017-10-01

Full Text Available The literature of active magnetic bearing (AMB technology dates back to at least 1937 when the earliest work that clearly describes an active magnetic bearing system was published by Jesse Beams [...

Performance of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped flexibly mounted spiral-groove thrust bearing

Science.gov (United States)

Ream, L. W.

1974-01-01

A test program was conducted to determine the performance characteristics of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped spiral-groove thrust bearing designed for the Brayton cycle rotating unit (BRU). Hydrostatic, hybrid (simultaneously hydrostatic and hydrodynamic), and hydrodynamic tests were conducted in argon gas at ambient pressure and temperature ranges representative of operation to the 10.5 kWe BRU power-generating level. Performance of the gas lubricated bearings is presented including hydrostatic gas flow rates, bearing clearances, bearing temperatures, and transient performance.

14 CFR 23.623 - Bearing factors.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 23.623 Section 23.623... Bearing factors. (a) Each part that has clearance (free fit), and that is subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of normal relative motion. (b) For...

Molecular Modeling Studies of Thiophenyl C-Aryl Glucoside SGLT2 Inhibitors as Potential Antidiabetic Agents

Directory of Open Access Journals (Sweden)

Mukesh C. Sharma

2014-01-01

Full Text Available A QSAR study on thiophenyl derivatives as SGLT2 inhibitors as potential antidiabetic agents was performed with thirty-three compounds. Comparison of the obtained results indicated the superiority of the genetic algorithm over the simulated annealing and stepwise forward-backward variable method for feature selection. The best 2D QSAR model showed satisfactory statistical parameters for the data set (r2=0.8499, q2=0.8267, and pred_r2=0.7729 with four descriptors describing the nature of substituent groups and the environment of the substitution site. Evaluation of the model implied that electron-rich substitution position improves the inhibitory activity. The good predictive 3D-QSAR models by k-nearest neighbor (kNN method for molecular field analysis (MFA have cross-validated coefficient q2 value of 0.7663 and predicted r2 value of 0.7386. The results have showed that thiophenyl groups are necessary for activity and halogen, bulky, and less bulky groups in thiophenyl nucleus enhanced the biological activity. These studies are promising for the development of novel SGLT2 inhibitor, which may have potent antidiabetic activity.

Hydrostatic bearing with a stepped duct

International Nuclear Information System (INIS)

Krevsun, Eh.P.; Ivanov, A.A.

1975-01-01

A method for calculating and experimental data from tests on a hydrostatic bearing whose operating hydraulic channel is formed by two cylincrical surfaces, are presented. Unlike currently used hydrostatic bearings, the bearing described has no capillary choke or diaphragm choke at the entrance. This simplifies the construction and increases the reliability, especially when it is operated with corrosive liquids or liquids containing solid suspensoids and causing erosion and blockage of the choke structures. In order to obtain the calculated relations, the flow of a liquid from the bearing in the axial direction to one side through a part of an aperture of unit width was examined. The effect of rotating the axle, of flow in the circumferential direction, and curvature of the aperture was not considered. Isothermal and laminar flows were considered. Because of the simplicity of the hydraulic circuit and the satisfactory properties (bearing capability and flow rate), the bearing described may be used in pumps operating with corrosive liquids, with those containing solid suspensoids and in nuclear energy establishments. (author)

DW_BEAR

Data.gov (United States)

Department of Homeland Security — Subset of BEAR (Bi-Weekly Examination Analysis and Reporting) data used for financial audit remediation reporting within the Coast Guard Business Intelligence (CGBI)...

Theoretical research on effects of substituents and the solvent on quadruple hydrogen bonded complexes

Directory of Open Access Journals (Sweden)

Lingjia Xu

2007-04-01

Full Text Available Semiempirical AM1 and INDO/CIS methods were used to study the structures and spectroscopy of hydrogen bonded complexes formed by the oligophenyleneethynylene (monomer A with isophthalic acid (monomer B. The binding energies of the complexes are lowered by increasing electron-donating abilities of the substituents near the hydrogen bonds on monomer A. The first absorptions in the electronic spectra and the vibration frequencies of the N-H bonds in the IR spectra for the complexes are both red-shifted compared with those of the monomers. The presence of dimethylsulfoxide (DMSO can reduce the binding energy of the complex through hydrogen bonding. This results in a blue-shift for the first absorption in the electronic spectrum and red-shift for the vibration frequencies of the N-H bonds in the IR spectrum of the complex.

Synthesis of enantiomerically enriched drug precursors and an insect pheromone via reduction of ketones using commercially available carbonyl reductase screening kit "Chiralscreen® OH".

Science.gov (United States)

Nagai, Toshiya; Sakurai, Saki; Natori, Naoki; Hataoka, Manaka; Kinoshita, Takako; Inoue, Hiroyoshi; Hanaya, Kengo; Shoji, Mitsuru; Sugai, Takeshi

2018-04-01

Commercially available "Chiralscreen® OH" starter kit containing five types of carbonyl reductases (E001, E007, E031, E039, and E078) was used for the reduction of several aromatic and aliphatic ketones to obtain enantiomerically enriched drug precursors and an insect pheromone. Almost stereochemically pure secondary alcohols, used in the synthesis of drugs such as (R)-rasagiline mesylate, (S)-rivastigmine, (R)-chlorphenesin carbamate, and (R)-mexiletine, and the insect pheromone (4S,5R)-sitophilure, were conveniently obtained. The enzymes worked well with ketones containing at least one non-bulky substituent at the carbonyl group. The diverse stereochemical preference of the above five carbonyl reductases was clarified. Copyright © 2017 Elsevier Ltd. All rights reserved.

Structural dependence of the multi-functionalized carbon nanotubes to the substituents on the grafted diazo compounds

Science.gov (United States)

Amiri, Rahebeh; Rasouli, Sousan; Ghasemi, Alireza; Eghbali, Babak; Mohammadi, Soutodeh

2014-05-01

Systematic studies on the covalent functionalization of multi-walled carbon nanotubes were performed by a series of azo molecules with different substituents. For this investigation, 4-substituted diazonium reagents have been used in the reaction with the functionalized multi-walled carbon nanotubes. We analyzed the effect of the substituted groups on the diazo component affinity in the grafting. Also, the structural differences of the final products were evaluated by visual dispersion test, UV-Vis absorption. Fourier transforms infrared, Raman, and several complementary techniques (scanning electron microscopy, thermal gravimetric analysis, and colorimetry test). Nuclear magnetic resonance spectroscopy has been used to confirm the allylic protons attached to the surface of carbon nanotubes after functionalization.

Bearing-Mounting Concept Accommodates Thermal Expansion

Science.gov (United States)

Nespodzany, Robert; Davis, Toren S.

1995-01-01

Pins or splines allow radial expansion without slippage. Design concept for mounting rotary bearing accommodates differential thermal expansion between bearing and any structure(s) to which bearing connected. Prevents buildup of thermal stresses by allowing thermal expansion to occur freely but accommodating expansion in such way not to introduce looseness. Pin-in-slot configuration also maintains concentricity.

Blade Bearing Friction Estimation of Operating Wind Turbines

DEFF Research Database (Denmark)

Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

2012-01-01

Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...... monitoring systems. A novel algorithm for online monitoring of bearing friction level is developed combining physical knowledge about pitch system dynamics with state estimator, i.e. observer theory and signal processing assuming realistic sensor availability. Results show estimation of bearing friction...

Influence of Introduced Substituents on the Anion-selectivity of [14]Tetraazaannulene Complexes.

Science.gov (United States)

Moriuchi-Kawakami, Takayo; Obita, Minako; Tsujinaka, Toshiki; Shibutani, Yasuhiko

2015-01-01

Nickel(II) complexes of [14]tetraazaannulene derivatives incorporating aromatic rings into their azaannulene framework were synthesized, and the anion-selectivity of the [14]tetraazaannulene nickel complexes 1 - 4 was evaluated by potentiometric measurements with solvent polymeric membrane electrodes. All of the [14]Tetraazaannulene nickel complexes, except 3, were found to exhibit high selectivity for the I(-) ion over the SCN(-) ion, although considerable interference of the ClO4(-) ion was observed in all 1 - 4 complexes. Concerning the anion-selectivities of 1 and 4, the incorporation of naphthalene rings into the azaannulene framework decreased not only the interference of the ClO4(-) ion but also the I(-) ion-selectivity over the SCN(-) ion. Comparison studies between the dibenzotetraaza[14]annulene nickel complexes 1 - 3 indicated that differences in the attached substituents of the [14]tetraazaannulene nickel complexes greatly influenced the ion-selectivity as ionophores. According to our computational results, the ionophoric properties of [14]tetraazaannulene nickel complexes 1 - 4 were influenced by their electrostatic properties rather than their topological properties.

Structural, absorption, and molecular properties of o,o'-dihydroxyazo resorcinol dyes bearing an acryloyloxy group

Science.gov (United States)

Özkınalı, Sevil; Çavuş, M. Serdar; Ceylan, Abdullah; Gür, Mahmut

2017-12-01

To the best of our knowledge, this is the first study reporting the synthesis and characterization of o,o‧-dihydroxyazo dyes bearing an acryloyl group. The o,o‧-dihydroxyazo dyes were synthesized through coupling of resorcinol with the diazonium salts of 2-amino-4-methylphenol, 2-aminophenol, 2-amino-4-chlorophenol, and 2-amino-4-nitrophenol. Their acryloyl derivatives were synthesized using metallic sodium and acryloyl chloride under an inert atmosphere. Characterization of the compounds was conducted using infrared (IR), ultraviolet-visible (UV-vis), proton nuclear magnetic resonance (1H NMR), and carbon nuclear magnetic resonance (13C NMR) spectroscopic methods. The tautomerism of the synthesized compounds' was also evaluated. The results were compared with theoretical results obtained by density functional theory (DFT). The DFT calculations were performed to obtain ground-state optimized geometries and calculate the relevant electronic and chemical reactivity parameters. Furthermore, possible tautomers deduced from the UV-vis spectra were investigated using theoretical calculations. Both the IR and NMR spectral data showed that azo tautomers predominate in the solid state and DMSO solvent. The effects of pH, solvent, and substituent on the predominant tautomers were further investigated through UV-vis spectroscopy. The results indicate that hydrazone tautomers were dominant at pH 12 in dimethylformamide (DMF), whereas azo tautomers were dominant at pH 2 in EtOH or CHCl3.

The shared preference niche of sympatric Asiatic black bears and sun bears in a tropical forest mosaic.

Science.gov (United States)

Steinmetz, Robert; Garshelis, David L; Chutipong, Wanlop; Seuaturien, Naret

2011-01-20

Ecologically similar species often coexist by partitioning use of habitats or resources. Such partitioning can occur through divergent or shared niches. We investigated overlap in habitat use and spatial co-occurrence by sympatric Asiatic black bears and sun bears in three habitats in Thailand, and thereby assessed which niche model best accounts for their coexistence. We used density of species-specific signs to assess habitat use. Signs of both bear species occurred in all three habitats, and on >60% of sampling transects. Both species fed mostly on fruit; insect feeding signs were uncommon, and were mostly from sun bears. Significant differences in habitat use occurred only in montane forest, the habitat in which fruit was most abundant; incidence of black bear sign there was six times higher than that of sun bears. Habitat use was similar between the two species in the other habitats, which comprised 85% of the area. Of 10 habitat attributes examined, fruiting tree density was the best predictor of occurrence for both species. Models that included interspecific competition (fresh foraging activity of the other species) were less supported than the top models without competition. Bear species co-occurrence at both coarse and fine spatial scales and use of the same resources (fruit trees) indicated common niche preferences. However, their habitat use differed in ways expected from their physical differences: larger black bears dominated in the most fruit-rich habitat, and smaller sun bears used less-preferred insects. These results indicate broadly overlapping fundamental niches combined with asymmetric competition-features consistent with the concept of shared preference niches. This model of the niche has received little attention in ecology, but appears to be relatively common in nature.

The shared preference niche of sympatric Asiatic black bears and sun bears in a tropical forest mosaic.

Directory of Open Access Journals (Sweden)

Robert Steinmetz

2011-01-01

Full Text Available Ecologically similar species often coexist by partitioning use of habitats or resources. Such partitioning can occur through divergent or shared niches. We investigated overlap in habitat use and spatial co-occurrence by sympatric Asiatic black bears and sun bears in three habitats in Thailand, and thereby assessed which niche model best accounts for their coexistence.We used density of species-specific signs to assess habitat use. Signs of both bear species occurred in all three habitats, and on >60% of sampling transects. Both species fed mostly on fruit; insect feeding signs were uncommon, and were mostly from sun bears. Significant differences in habitat use occurred only in montane forest, the habitat in which fruit was most abundant; incidence of black bear sign there was six times higher than that of sun bears. Habitat use was similar between the two species in the other habitats, which comprised 85% of the area. Of 10 habitat attributes examined, fruiting tree density was the best predictor of occurrence for both species. Models that included interspecific competition (fresh foraging activity of the other species were less supported than the top models without competition.Bear species co-occurrence at both coarse and fine spatial scales and use of the same resources (fruit trees indicated common niche preferences. However, their habitat use differed in ways expected from their physical differences: larger black bears dominated in the most fruit-rich habitat, and smaller sun bears used less-preferred insects. These results indicate broadly overlapping fundamental niches combined with asymmetric competition-features consistent with the concept of shared preference niches. This model of the niche has received little attention in ecology, but appears to be relatively common in nature.

77 FR 59639 - Bear Lake National Wildlife Refuge, Bear Lake County, ID and Oxford Slough Waterfowl Production...

Science.gov (United States)

2012-09-28

... by 2020 to reduce the sedimentation rate of Bear River water diversions and to better exclude carp... sedimentation rate of Bear River water diversions and better exclude carp from Refuge wetlands. As in... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R1-R-2012-N095; 1265-0000-10137-S3] Bear...

Influence of substituents in vinyl groups on reactivity of parylene during polymerization process

International Nuclear Information System (INIS)

Freza, Sylwia; Skurski, Piotr; Bobrowski, Maciej

2010-01-01

The MCSCF calculations indicate that both triplet and singlet state of biradical di-para-xylylene can exist during polymerization of parylene in gas phase and both can potentially react with vinyl molecules. The singlet-state open-shell dimer turned out to exhibit multiconfigurational character. In the case of triplet state of the dimer two mechanisms of the reactions with various species containing vinyl groups have been examined at the B3LYP/6-31G level. The kinetic and thermodynamical barriers have been estimated for the reaction path involving the π-bond cleavage as well as for the route describing the hydrogen atom transfer. It was found that the overall reactions are thermodynamically favorable, whereas appropriate kinetic barriers for certain derivatives are very small (close to 0 kcal/mol) which in turn makes allowances for easy reactivity under accessible conditions. The calculated mechanisms indicate the influence of substituents in vinyl groups for reactivity of parylene during LPCVD process.

Infrared matrix isolation study of hydrogen bonds involving C-H bonds: Substituent effects

International Nuclear Information System (INIS)

Jeng, M.L.H.; Ault, B.S.

1989-01-01

The matrix isolation technique combined with infrared spectroscopy has been employed to isolate and characterize hydrogen-bonded complexes between a series of substituted alkynes and several oxygen and nitrogen bases. Distinct evidence for hydrogen bond formation was observed in each case, with a characteristic red shift of the hydrogen stretching motion ν r . Shifts between 100 and 300 cm -1 were observed, the largest being for the complex of CF 3 CCH with (CH 3 ) 3 N. The perturbed carbon-carbon triple bond stretching vibration was observed for most complexes, as was the alkynic hydrogen bending motion. Attempts were made to correlate the magnitude of the red shift of ν s with substituent constants for the different substituted alkynes; a roughly linear correlation was found with the Hammett σ parameter. Lack of correlation Δν s with either σ 1 or σ R alone suggests that both inductive and resonance contributions to the strength of the hydrogen-bonding interaction are important

Treatment of 29 patients with bulky squamous cell carcinoma of the cervix with simultaneous cisplatin, 5-fluorouracil, and split-course hyperfractionated radiation therapy

Energy Technology Data Exchange (ETDEWEB)

Heaton, D.; Yordan, E.; Reddy, S.; Bonomi, P.; Lee, M.S.; Lincoln, S.; Graham, J.; Dolan, T.; Miller, A.; Phillips, A. (Rush Presbyterian-St. Lukes Hospital, Chicago, IL (USA))

1990-09-01

Attempting to improve local disease control in bulky primary or recurrent pelvic tumors, 29 patients with squamous cell carcinoma of the cervix were treated with concomitant chemotherapy and split-course hyperfractionated radiation therapy between April 1983 and August 1988. Cisplatin (CDDP) and 5-fluorouracil (5-FU) have been shown to be radiation enhancers; furthermore, CDDP, radiation therapy, and continuous-infusion 5-FU have elicited high local response rates in head and neck squamous cell carcinoma. A pilot study of cyclical week on/week off CDDP, continuous-infusion 5-FU, and hyperfractionated radiation therapy was developed. Radiation was administered at 116 cGy twice daily, Days 1-5, every other week for a median dose of 4600 cGy to a pelvic field, with paraaortic extension if indicated. Concomitant chemotherapy included CDDP 60 mg/m2 IV Day 1 and 5-FU 600 mg/m2 IV continuous infusion for 96 hr following CDDP infusion. Patients received a median of four cycles of combined treatment, and intracavitary or interstitial brachytherapy followed in 21 patients. Local pelvic response was achieved in 29 of 29 (100%): complete response (CR) in 19 of 29 (66%), partial response (PR) in 10 of 29 (34%). Among CR patients 10 of 19 (53%) were without evidence of disease at a mean follow-up of 29 (range 12-76) months. Five-year actuarial disease-free survival among complete responders was 65%. Of the 10 CR patients 2 failed in the pelvis, for a local control rate of 17/19 (89%). Chemotherapy-related and acute radiation morbidity was minimal but 2 patients required surgical correction of radiation injury. Aggressive combination of split-course hyperfractionated radiation therapy with radiation enhancers resulted in promising local control of bulky pelvic tumor, with an acceptable complication rate, in this otherwise very poor prognostic group of patients.

Cu(II)-mediated ortho C-H alkynylation of (hetero)arenes with terminal alkynes.

Science.gov (United States)

Shang, Ming; Wang, Hong-Li; Sun, Shang-Zheng; Dai, Hui-Xiong; Yu, Jin-Quan

2014-08-20

Cu(II)-promoted ortho alkynylation of arenes and heteroarenes with terminal alkynes has been developed to prepare aryl alkynes. A variety of arenes and terminal alkynes bearing different substituents are compatible with this reaction, thus providing an alternative disconnection to Sonogashira coupling.

Rotor Rolling over a Water-Lubricated Bearing

Science.gov (United States)

Shatokhin, V. F.

2018-02-01

The article presents the results of studying the effect of forces associated with secondary damping coefficients (gyroscopic forces) on the development of asynchronous rolling of the rotor over a water-lubricated bearing. The damping forces act against the background of other exciting forces in the rotor-supports system, in particular, the exciting forces of contact interaction between the rotor and bearing. The article considers a rotor resting on supports rubbing against the bearing and the occurrence of self-excited vibration in the form of asynchronous roll-over. The rotor supports are made in the form of plain-type water-lubricated bearings. The plain-type bearing's lubrication stiffness and damping forces are determined using the wellknown algorithms taking into account the physical properties of water serving as lubrication of the bearing. The bearing sliding pair is composed of refractory materials. The lubrication layer in such bearings is thinner than that used in oil-lubricated bearings with white metal lining, and there is no white metal layer in waterlubricated bearings. In case of possible deviations from normal operation of the installation, the rotating rotor comes into direct contact with the liner's rigid body. Unsteady vibrations are modeled using a specially developed software package for calculating the vibration of rotors that rub against the turbine (pump) stator elements. The stiffness of the bearing liner with the stator support structure is specified by a dependence in the force-deformation coordinate axes. In modeling the effect of damping forces, the time moment corresponding to the onset of asynchronous rolling-over with growing vibration amplitudes is used as the assessment criterion. With a longer period of time taken for the rolling-over to develop, it becomes possible to take the necessary measures in response to actuation of the equipment set safety system, which require certain time for implementing them. It is shown that the

Rolling Bearing Life Prediction, Theory, and Application

Science.gov (United States)

Zaretsky, Erwin V.

2016-01-01

A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg-Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. (The use of ISO 281:2007 with a fatigue limit in these calculations would result in a bearing life approaching infinity.) Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application. Rules had been developed to distinguish and compare predicted lives with those actually obtained. Based upon field and test results of 51 ball and roller bearing sets, 98 percent of these bearing sets had acceptable

Electronic optimization of heteroleptic Ru(II) bipyridine complexes by remote substituents: synthesis, characterization, and application to dye-sensitized solar cells.

Science.gov (United States)

Han, Won-Sik; Han, Jung-Kyu; Kim, Hyun-Young; Choi, Mi Jin; Kang, Yong-Soo; Pac, Chyongjin; Kang, Sang Ook

2011-04-18

We prepared a series of new heteroleptic ruthenium(II) complexes, Ru(NCS)(2)LL' (3a-3e), where L is 4,4'-di(hydroxycarbonyl)-2,2'-bipyridine and L' is 4,4'-di(p-X-phenyl)-2,2'-pyridine (X = CN (a), F (b), H (c), OMe (d), and NMe(2) (e)), in an attempt to explore the structure-activity relationships in their photophysical and electrochemical behavior and in their performance in dye-sensitized solar cells (DSSCs). When substituent X is changed from electron-donating NMe(2) to electron-withdrawing CN, the absorption and emission maxima reveal systematic bathochromic shifts. The redox potentials of these dyes are also significantly influenced by X. The electronic properties of the dyes were theoretically analyzed using density functional theory calculations; the results show good correlations with the experimental results. The solar-cell performance of DSSCs based on dye-grafted nanocrystalline TiO(2) using 3a-3e and standard N3 (bis[(4,4'-carboxy-2,2'-bipyridine)(thiocyanato)]ruthenium(II)) were compared, revealing substantial dependences on the dye structures, particularly on the remote substituent X. The 3d-based device showed the best performance: η = 8.30%, J(SC) = 16.0 mA·cm(-2), V(OC) = 717 mV, and ff = 0.72. These values are better than N3-based device.

Dark and Photoinduced Cytotoxic Activity of the New Chlorophyll-a Derivatives with Oligoethylene Glycol Substituents on the Periphery of Their Macrocycles

OpenAIRE

Yana I. Pylina; Dmitry M. Shadrin; Oksana G. Shevchenko; Olga M. Startseva; Igor O. Velegzhaninov; Dmitry V. Belykh; Ilya O. Velegzhaninov

2017-01-01

In the present work, we investigated the dark and photoinduced cytotoxic activity of the new chlorophyll-a derivatives which contain the substituents of oligoethylene glycol on the periphery of their macrocycles. These compounds were tested using human cell lines to estimate their potential as photosensitizers for photodynamic therapy of cancer. It was shown that all the tested compounds have expressed photoinduced cytotoxic activity in vitro. Detailed study of the biological activity of one ...

Fractal analysis of polar bear hairs

Directory of Open Access Journals (Sweden)

Wang Qing-Li

2015-01-01

Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

Removable bearing arrangement for a wind turbine generator

Science.gov (United States)

Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

2010-06-15

A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

Technology development for indigenous water lubricated bearings

International Nuclear Information System (INIS)

Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

2010-01-01

Water Lubricated Bearings (WLB) are used in various mechanisms of fuel handling systems of PHWRs and AHWR. Availability and random failures of these bearings was a major factor in refuelling operations. Indigenous development of these bearings was taken up and 7 types of antifriction bearings in various sizes (totaling 37 variants) for PHWR, AHWR and Dhruva applications were successfully developed. This paper deals with various aspects of WLB development. (author)

Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

OpenAIRE

David Fraser; Sara Dubois

2013-01-01

Simple Summary The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia. Residents of this small community were surveyed by phone twice over the following year, before and after government actions. This study aimed to understand local attitudes on how these bears should be managed and whether they differed from existing bea...

Assessing the attractive/repulsive force balance in axial cyclohexane C-Hax ···Yax contacts: A combined computational analysis in monosubstituted cyclohexanes.

Science.gov (United States)

Silva Lopez, Carlos; Nieto Faza, Olalla; De Proft, Frank; Kolocouris, Antonios

2016-11-15

The interactions of axial substituents in monosubstituted cyclohexane rings are studied in this work using an array of different computational techniques. Additionally, the anomalous axial preference for some bulky substituents is related to stabilizing dispersion interactions. We find that the C-H ax ···Y ax contacts for various substituents with distances ranging from 2 to ∼5 Å may include attractive dispersion forces that can affect the conformational equilibrium; these forces co-exist with Pauli repulsive forces effected by Y ax group due to van der Waals sphere penetration. At distances between 2 and 3 Å stabilizing electron transfer interactions were calculated and the combination of natural bond orbital and QTAIM analysis showed that, in certain cases, Y ax  =  t Bu, C ax -O or C ax  = O or S ax  = O or C ax  = S this interaction can be characterized as an improper H-bond. DFT-D3 and non-covalent interactions calculations (NCIs) in cyclohexane derivatives with Y ax  = SiOR 3 including H Yax ···H cy surfaces at distances ranging between 4 and 6 Å suggest that dispersion has a clear effect on the experimentally observed stabilization of the axial conformer. NCIs computed from the reduced density gradient help to visually identify and analyze these interactions. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

DFT studies for the substituent effect on the diels-alder reaction of 1,4-diaza-1,3-butadienes

International Nuclear Information System (INIS)

Lee, Gab Yong

2001-01-01

DFT calculations have been performed on several substituted 1,4-diaza-1,3-butadienes (1,4-DABs) with electron donating and withdrawing groups at the terminal two nitrogens to investigate the reactivity of Diels-Alder reaction with acrolein. The calculated FMO (Frontier Molecular orbital) energies for the optimized 1,4-disubstituted-1,4DABs have been used to explain both normal and inverse electron demand Diels-Alder reactions. It is shown that the electron donating and withdrawing substituents lead to the normal(HOMO diene controlled) and inverse electron demand (LUMO diene controlled) Diels-Alder reactions, respectively

Uranium-bearing wastes and their radon emanation

International Nuclear Information System (INIS)

Sasaki, Tomozo; Imamura, Mitsutaka; Gunji, Yasuyoshi

2007-01-01

There are no data available with regard to radon emanation coefficients for uranium-bearing wastes; such data are needed for the assessment of radiation exposure from radon that will be generated in the distant future as one uranium progeny at shallow land disposal sites for uranium-bearing wastes. There are many kinds of uranium-bearing wastes. However, it is not necessary to measure the radon emanation coefficients for all of them for two reasons. First, the radon emanation coefficients for uranium-bearing wastes contaminated by dissolved uranium are determined by the uranium chemical form, the manner of uranium deposition on the waste matrix, and the size of the particles which constitute the waste matrix. Therefore, only a few representative measurements are sufficient for such uranium-bearing wastes. Second, it is possible to make theoretical calculations of radon emanation coefficients for uranium-bearing wastes contaminated by UO 2 particles before sintering. In the present study, simulated uranium-bearing wastes contaminated by dissolved uranium were prepared, their radon emanation coefficients were measured and radon emanation coefficients were calculated theoretically for uranium-bearing wastes contaminated by UO 2 particles before sintering. The obtained radon emanation coefficients are distributed at higher values than those for ubiquitous soils and rocks in the natural environment. Therefore, it is not correct to just compare uranium concentrations among uranium-bearing wastes, ubiquitous soils and rocks in terms of radiation exposure. The radon emanation coefficients obtained in the present study have to be employed together with the uranium concentration in uranium-bearing wastes in order to achieve proper assessment of radiation exposure. (author)

Failure of GIMBAL bearing in directional GYRO

International Nuclear Information System (INIS)

Pervaiz, R.; Baig, N.A.; Shahid, M.; Ahmad, A.; Chohan, G.Y.

2003-01-01

This paper relates to the directional gyro of a sensing device used in indigenously developed surface-to-surface missile. The assembling of more than one thousand components in the form of several sub assemblies including hundreds of silver solders of this device was done in the hundred-thousands-class clean room according to assembly procedure. Whereas more than twenty bearings including gimbals bearings were assembled in the ten-thousands-class clean room after inspection/ testing them on beating testing system as per routine. The device was entered in testing and adjustment phase after successful completion of assembly work. The directional gyro qualified all the tests except the most critical one, the drift-rate. The drift-rate of outer gimbal was 60% more than permissible limit whereas drift-rate of inner gimbal was found O.K. It was diagnosed that at least one inner gimbal bearing out of two had some problem. The results were same after rebalancing of gimbals three times. The directional gyro was disassembled in clean room and the radial-thrust-bearing was recovered and flange bearing which are inner gimbal bearings. They were checked on bearing testing system and it was found that flange-bearing had more friction than permissible limit and hence rejected but radial thrust bearing were declared O.K. The gyro was reassembled with new O.K. flange bearing and the assembly work was completed in all respects. The sensing device qualified all the tests including the drift-rate. This case study is being presented to emphasize the importance of careful assembly of gyro in clean environment. (author)

Bearing life in contaminated oil and oil passing into bearing for tapered roller bearing; Ensui koro jikuuke ni okeru ibutsu yuchu deno jumyo to kantsu yuryo

Energy Technology Data Exchange (ETDEWEB)

Asai, Y; Oshima, H; Sakamoto, K [Koyo Seiko Co. Ltd., Osaka (Japan)

1997-10-01

In this paper a relationship between depth of dents, area of dents gathered and bearing life has been investigated for tapered roller bearings used in differential gear case. It is effective for the longer bearing life to reduce hard particles of Fe especially among several contaminations existing in the gear case. It is also effective to make oil level lower in the case from the view point for reduction of number of dents. 8 refs., 8 figs., 4 tabs.

Grizzly bears and mining in the Cheviot region

Energy Technology Data Exchange (ETDEWEB)

Symbaluk, M.; Archibald, T. [Foothills Research Inst., Hinton, AB (Canada)

2008-07-01

This presentation described a grizzly bear research program conducted by the Foothill Research Institute at the Cheviot mine. The research program uses a satellite land classification protocol and remote sensing tools to map and identify the grizzly bear habitat. Modelling is also conducted to predict bear probabilities. Global information systems (GIS) are used to evaluate bear responses to human activities. Grizzly bear health and wellness is also assessed as part of the programs. Land maps are combined with global positioning systems (GPS) and resource selection function (RSF) models in order to map grizzly bear distribution. Data obtained from the program is used to inform decision-making and support policy development. Previous studies predicted that the grizzly bear population would disappear from the Cheviot mine area after 20 years of its being in operation. The research program provided real data to test predictions made during previous environmental assessments. Grizzly bear populations have actually increased in the mining area. It was concluded that the bears have moved more freely through industrial landscapes than previously predicted. tabs., figs.

Theoretical rationalization for reduced charge recombination in bulky carbazole-based sensitizers in solar cells.

Science.gov (United States)

Surakhot, Yaowarat; Laszlo, Viktor; Chitpakdee, Chirawat; Promarak, Vinich; Sudyoadsuk, Taweesak; Kungwan, Nawee; Kowalczyk, Tim; Irle, Stephan; Jungsuttiwong, Siriporn

2017-05-05

The search for greater efficiency in organic dye-sensitized solar cells (DSCs) and in their perovskite cousins is greatly aided by a more complete understanding of the spectral and morphological properties of the photoactive layer. This investigation resolves a discrepancy in the observed photoconversion efficiency (PCE) of two closely related DSCs based on carbazole-containing D-π-A organic sensitizers. Detailed theoretical characterization of the absorption spectra, dye adsorption on TiO 2 , and electronic couplings for charge separation and recombination permit a systematic determination of the origin of the difference in PCE. Although the two dyes produce similar spectral features, ground- and excited-state density functional theory (DFT) simulations reveal that the dye with the bulkier donor group adsorbs more strongly to TiO 2 , experiences limited π-π aggregation, and is more resistant to loss of excitation energy via charge recombination on the dye. The effects of conformational flexibility on absorption spectra and on the electronic coupling between the bright exciton and charge-transfer states are revealed to be substantial and are characterized through density-functional tight-binding (DFTB) molecular dynamics sampling. These simulations offer a mechanistic explanation for the superior open-circuit voltage and short-circuit current of the bulky-donor dye sensitizer and provide theoretical justification of an important design feature for the pursuit of greater photocurrent efficiency in DSCs. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Plaque pH Changes Following Consumption of Two Types of Plain and Bulky Bread.

Science.gov (United States)

Mortazavi, Shiva; Noin, Sogol

2011-01-01

Consistency, backing process and content differences could influence cariogenic potential of foods. The aim was to compare plaque pH changes following consumption of two types of bread with different physical characteristics. In this clinical trial, interproximal plaque pH of 10 volunteers with high risk of dental caries (saliva Streptococcus mutans > 10(5), high dental caries experience, and average DMFT =6.10 ± 1.56) was measured. Plain traditionally backed "Sangak bread" and soft bulky "Baguette bread" and %10 sucrose solution were tested in a cross over designed experiment. Baseline plaque pH was recorded and followed by 1, 5, 10, 15, 20, and 30 minutes intervals. Data was analyzed using ANOVA and Tukey test (α = 0.05). Sucrose solution caused the most pronounced pH and ΔpH drop from 7.15 ± 0.33 at baseline to 6.78 ± 0.29. Means plaque pH of 10% sucrose solution and Baguette were not statistically different at 1, 20 and 30 minutes (P > 0.05). Mean plaque pH of Sangak and Baguette showed significant differences at 0, 1, 20 and30 minutes (P bread samples within first 10 minutes, pH increased and then started to decrease during tenth to fifteenth minutes. During all experiment phases, the mean pH of Baguette with less consistency and carbohydrate content and higher rate of starch gelatination was lower compared to Sangak.

Synthesis and characterization of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and alkylamines as side groups

International Nuclear Information System (INIS)

Lee, Bae Hoon; Song, Soo Chang; Lee, Young Moo; Sohn, Youn Soo

2002-01-01

Thermosensitive poly(organophosphazenes) bearing methoxy-poly(ethylene glycon) (MPEG) and alkylamine as substituents have been synthesized and characterized by elemental analysis, NMR spectroscopy, GPC, and DSC. All the polymers exhibited crystallinity, which was probably induced by the MPEG side chain of the polymers. All the polymers exhibited the lower critical solution temperature (LCSTs) in the range of 28 to 94 .deg. C depending on several factors such as mole ratio of the substituents, kinds of PEG and alkylamines. The higher content of MPEG and shorter chain length of alkylamines of the polymers afforded the higher LCST. The LCSTs of the polymers exhibited almost concentration-independent behavior in the range of 3-30 wt % of the polymers in aqueous solutions. The polymers showed the higher LCSTs in the acidic solutions than in the neutral and basic solutions. The ionic strength of the polymer solution affected the LCST,which decreased with increased NaCl concentration. The polymer bearing almost equimolar substituents with the -N-P-N unit has shown the LCST more sensitive to NaCl and pH than that with the -N-P-O- unit. The polymers were found to degrade in acidic solution but be very stable in alkali solution as well as in the buffer solution of pH 7.4

Ball Bearing Analysis with the ORBIS Tool

Science.gov (United States)

Halpin, Jacob D.

2016-01-01

Ball bearing design is critical to the success of aerospace mechanisms. Key bearing performance parameters, such as load capability, stiffness, torque, and life all depend on accurate determination of the internal load distribution. Hence, a good analytical bearing tool that provides both comprehensive capabilities and reliable results becomes a significant asset to the engineer. This paper introduces the ORBIS bearing tool. A discussion of key modeling assumptions and a technical overview is provided. Numerous validation studies and case studies using the ORBIS tool are presented. All results suggest the ORBIS code closely correlates to predictions on bearing internal load distributions, stiffness, deflection and stresses.

Superconducting bearings for flywheel applications

DEFF Research Database (Denmark)

Abrahamsen, A.B.

2001-01-01

A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

Stochasticity in Natural Forage Production Affects Use of Urban Areas by Black Bears: Implications to Management of Human-Bear Conflicts

Science.gov (United States)

Baruch-Mordo, Sharon; Wilson, Kenneth R.; Lewis, David L.; Broderick, John; Mao, Julie S.; Breck, Stewart W.

2014-01-01

The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus), little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years), where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from becoming population sinks

Stochasticity in natural forage production affects use of urban areas by black bears: implications to management of human-bear conflicts.

Directory of Open Access Journals (Sweden)

Sharon Baruch-Mordo

Full Text Available The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus, little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years, where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from

Stochasticity in natural forage production affects use of urban areas by black bears: implications to management of human-bear conflicts.

Science.gov (United States)

Baruch-Mordo, Sharon; Wilson, Kenneth R; Lewis, David L; Broderick, John; Mao, Julie S; Breck, Stewart W

2014-01-01

The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus), little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years), where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from becoming population sinks.

Characterization and measurement of hybrid gas journal bearings

Science.gov (United States)

Lawrence, Tom Marquis

This thesis concentrates on the study of hybrid gas journal bearings (bearings with externally pressurized mass addition). It differs from most work in that it goes back to "basics" to explore the hydrodynamic phenomena in the bearing gap. The thesis compares geometrically identical bearings with 2 configurations of external pressurization, porous liners where mass-addition compensation is varied by varying the liner's permeability, and bushings with 2 rows of 6 feedholes where the mass-addition compensation is varied by the feedhole diameter. Experimentally, prototype bearings with mass-addition compensation that spans 2 orders of magnitude with differing clearances are built and their aerostatic properties and mass addition characteristics are thoroughly tested. The fundamental equations for compressible, laminar, Poiseuille flow are used to suggest how the mass flow "compensation" should be mathematically modeled. This is back-checked against the experimental mass flow measurements and is used to determine a mass-addition compensation parameter (called Kmeas) for each prototype bushing. In so doing, the methodology of modeling and measuring the mass addition in a hybrid gas bearing is re-examined and an innovative, practical, and simple method is found that makes it possible to make an "apples-to-apples" comparison between different configurations of external pressurization. This mass addition model is used in conjunction with the Reynolds equation to perform theory-based numerical analysis of virtual hybrid gas journal bearings (CFD experiments). The first CFD experiments performed use virtual bearings modeled to be identical to the experimental prototypes and replicate the experimental work. The results are compared and the CFD model is validated. The ontological significance of appropriate dimensionless similitude parameters is re-examined and a, previously lacking, complete set of similitude factors is found for hybrid bearings. A new practical method is

Assessing bear-human conflicts in the Yukon Territory

OpenAIRE

Lukie, Raechel Dawn

2010-01-01

Managing conflicts between bears and humans is vital for human safety and for the conservation of bears. This study investigated black bear (Ursus americanus) and grizzly bear (Ursus arctos) interactions with humans in 18 major communities of the Yukon Territory. I used an information theoretic approach to generate predictive models of the relative potential of bear-human interaction for the 9 conservation officer management regions in the Yukon Territory. I independently modeled interactions...

77 FR 77070 - Black Bear Hydro Partners, LLC;

Science.gov (United States)

2012-12-31

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2727-086] Black Bear Hydro...: October 24, 2012. d. Submitted By: Black Bear Hydro Partners, LLC (Black Bear Hydro). e. Name of Project... designating Black Bear Hydro as the Commission's non-federal representative for carrying out informal...

Effects of exotic species on Yellowstone's grizzly bears

Science.gov (United States)

Reinhart, Daniel P.; Haroldson, Mark A.; Mattson, D.J.; Gunther, Kerry A.

2001-01-01

Humans have affected grizzly bears (Ursus arctos horribilis) by direct mortality, competition for space and resources, and introduction of exotic species. Exotic organisms that have affected grizzly bears in the Greater Yellowstone Area include common dandelion (Taraxacum officinale), nonnative clovers (Trifolium spp.), domesticated livestock, bovine brucellosis (Brucella abortus), lake trout (Salvelinus namaycush), and white pine blister rust (Cronartium ribicola). Some bears consume substantial amounts of dandelion and clover. However, these exotic foods provide little digested energy compared to higher-quality bear foods. Domestic livestock are of greater energetic value, but use of this food by bears often leads to conflicts with humans and subsequent increases in bear mortality. Lake trout, blister rust, and brucellosis diminish grizzly bears foods. Lake trout prey on native cutthroat trout (Oncorhynchus clarkii) in Yellowstone Lake; white pine blister rust has the potential to destroy native whitebark pine (Pinus albicaulis) stands; and management response to bovine brucellosis, a disease found in the Yellowstone bison (Bison bison) and elk (Cervus elaphus), could reduce populations of these 2 species. Exotic species will likely cause more harm than good for Yellowstone grizzly bears. Managers have few options to mitigate or contain the impacts of exotics on Yellowstone's grizzly bears. Moreover, their potential negative impacts have only begun to unfold. Exotic species may lead to the loss of substantial highquality grizzly bear foods, including much of the bison, trout, and pine seeds that Yellowstone grizzly bears currently depend upon.

Research In Diagnosing Bearing Defects From Vibrations

Science.gov (United States)

Zoladz, T.; Earhart, E.; Fiorucci, T.

1995-01-01

Report describes research in bearing-defect signature analysis - use of vibration-signal analysis to diagnose defects in roller and ball bearings. Experiments performed on bearings in good condition and other bearings in which various parts scratched to provide known defects correlated with vibration signals. Experiments performed on highly instrumented motor-driven rotor assembly at speeds up to 10,050 r/min, using accelerometers, velocity probes, and proximity sensors mounted at various locations on assembly to measure vibrations.

Synthesis, photochemical synthesis and antitumor evaluation of novel derivatives of thieno[3',2':4,5]thieno[2,3-c]quinolones.

Science.gov (United States)

DoganKoruznjak, Jasna; Slade, Neda; Zamola, Branimir; Pavelić, Kresimir; Karminski-Zamola, Grace

2002-05-01

The novel derivatives of thieno[3',2':4,5]thieno[2,3-c]quinolones 6a, 6b, 7, 10a and 10b were synthesized in multistep synthesis starting from thiophene-3-carboxaldehyde and malonic acid reacting in aldol condensation or from 3-bromothiophenes or methyl 4-bromothiophene-2-carboxylate reacting in Heck reaction. They resulted in corresponding substituted thienylacrylic acids 3a-c, which were cyclized into thieno[2,3-c]thiophene-2-carbonyl chlorides 4a-c and converted into thieno[2,3-c]thiophene-2-carboxamides 5a-d. Prepared carboxamides were photochemically dehydrohalogenated into corresponding substituted thieno[3',2':4,5]thieno[2,3-c]quinolones 6a-d. Compound 7 was prepared from 6d by alkylation with N-[3-(dimethylamino)propyl]chloride hydrochloride in the presence of NaH. Compounds 10a and 10b were prepared from 6c in the multistep synthesis over acid 8 and acid chloride 9. Compounds 6a, 6b, 7, 10a and 10b were found to exert cytostatic activities against malignant cell lines: pancreatic carcinoma (MiaPaCa2), breast carcinoma (MCF7), cervical carcinoma (HeLa), laryngeal carcinoma (Hep2), colon carcinoma (CaCo-2), melanoma (HBL), and human fibroblast cell lines (WI-38). The compound 6b, which bears the 3-dimethylaminopropyl substituent on quinolone nitrogen and methoxycarbonyl substituent on position 9, exhibited marked antitumor activity. On the contrary, compound 7, which also bears the 3-dimethylaminopropyl substituent on the quinolone nitrogen but anilido substituent on position 9, exhibited less antitumor activity than the others.

The Biotribology of PEEK-on-HXLPE Bearings Is Comparable to Traditional Bearings on a Multidirectional Pin-on-disk Tester.

Science.gov (United States)

Baykal, Doruk; Siskey, Ryan S; Underwood, Richard J; Briscoe, Adam; Kurtz, Steven M

2016-11-01

All-polymer bearings involving polyetheretherketone (PEEK) have been proposed for orthopaedic applications because they may reduce stress shielding, reduce weight of the implants, reduce wear and risk of osteolysis, and prevent release of metal ions by replacing the metal articulating components. Little is known about the biotribology of all-polymer PEEK bearings, including the effects of cross-shear, which are relevant for implant longevity, especially in the hip, and increased temperature that may affect lubricant proteins and, hence, lubrication in the joint. Using pin-on-disk in vitro testing, we asked: (1) Can all-polymer bearing couples involving PEEK have a comparable or lower wear rate than highly crosslinked UHMWPE (HXLPE) on CoCr bearing couples? (2) Is the wear rate of PEEK bearing couples affected by the amount of cross-shear? (3) Is there a difference in wear mechanism and surface morphology for all-polymer bearing surfaces compared with UHMWPE (HXLPE) on CoCr? We simultaneously tested a total of 100 pin-on-disk couples (n = 10 per bearing couple) consisting of three traditional metal-on-UHMWPE and seven polymer-on-polymer bearings for 2 million cycles under physiologically relevant conditions and in accordance with ASTM F732. Using analysis of variance, we analyzed the effect of bearing surface topography and cross-shear on wear rate. The changes in surface topography were evaluated using optical microscopy. Sample size was sufficient to provide 80% power to detect a difference of 1.4 mm 3 /MC in average wear rates of bearing couples. The combined wear rates of all-polymer bearing couples were not different than traditional bearing couples. With the numbers available, the PEEK and HXLPE bearing couple had a mean wear rate (WR: mean ± SD) of 0.9 ± 1.1 mm 3 /MC (95% confidence interval [CI], 0.2-1.5 mm 3 /MC), which was not different than the wear rate of the CoCr and HXLPE bearing couple (1.6 ± 2.0 mm 3 /MC; 95% CI, 0.4-2.8 mm 3 /MC; mean difference

Bearing assemblies, apparatuses, and motor assemblies using the same

Science.gov (United States)

Sexton, Timothy N.; Cooley, Craig H.; Knuteson, Cody W.

2015-12-29

Various embodiments of the invention relate to bearing assemblies, apparatuses and motor assemblies that include geometric features configured to impart a selected amount of heat transfer and/or hydrodynamic film formation. In an embodiment, a bearing assembly may include a plurality of superhard bearing pads distributed circumferentially about an axis. At least some of the plurality of superhard bearing pads may include a plurality of sub-superhard bearing elements defining a bearing surface. At least some of the plurality of sub-superhard bearing elements may be spaced from one another by one or more voids to impart a selected amount of heat transfer and hydrodynamic film formation thereon during operation. The bearing assembly may also include a support ring that carries the plurality of superhard bearing pads. In addition, at least a portion of the sub-superhard bearing elements may extend beyond the support ring.

Grafted Cross-Linked Polyolefin Substrates for Peptide Synthesis and Assays

DEFF Research Database (Denmark)

1999-01-01

suited for use in solid-phase biosystems, notably bioassays, such as immunoassays, DNA hybridization assays or PCR amplification. The grafted chains may bear substituents which are such that the polymer-grafted cross-linked polyolefin substrate is swellable by water or aqueous media, in other words...

Vertically loaded pivot bearing for high-speed shafts

International Nuclear Information System (INIS)

Zippe, G.; Werner, D.; Keller, A.; Stephan, E.

1974-01-01

The pivot bearing subjected to vertical loads has a pivot with a rounded end and a diametral slot and a cup-shaped recess in the bearing box. The end of the pivot and the recess constitute a gap which widens towards the periphery of the bearing. The bearing box carries an attachment with a clearance, the shape of a hollow cylinder and accomodating the pivot and its shaft. To feed the lubricating oil surrounding and filling the bearing there is a groove either in the wall of the clearance or at the end of the pivot in the direction of rotation of the shaft or against it. The oil carried to the support point flows back into the oil bath surrounding the bearing through a slot in the bearing box. (DG) [de

Non-Weight-Bearing and Weight-Bearing Ultrasonography of Select Foot Muscles in Young, Asymptomatic Participants: A Descriptive and Reliability Study.

Science.gov (United States)

Battaglia, Patrick J; Mattox, Ross; Winchester, Brett; Kettner, Norman W

The primary aim of this study was to determine the reliability of diagnostic ultrasound imaging for select intrinsic foot muscles using both non-weight-bearing and weight-bearing postures. Our secondary aim was to describe the change in muscle cross-sectional area (CSA) and dorsoplantar thickness when bearing weight. An ultrasound examination was performed with a linear ultrasound transducer operating between 9 and 12 MHz. Long-axis and short-axis ultrasound images of the abductor hallucis, flexor digitorum brevis, and quadratus plantae were obtained in both the non-weight-bearing and weight-bearing postures. Two examiners independently collected ultrasound images to allow for interexaminer and intraexaminer reliability calculation. The change in muscle CSA and dorsoplantar thickness when bearing weight was also studied. There were 26 participants (17 female) with a mean age of 25.5 ± 3.8 years and a mean body mass index of 28.0 ± 7.8 kg/m 2 . Inter-examiner reliability was excellent when measuring the muscles in short axis (intraclass correlation coefficient >0.75) and fair to good in long axis (intraclass correlation coefficient >0.4). Intraexaminer reliability was excellent for the abductor hallucis and flexor digitorum brevis and ranged from fair to good to excellent for the quadratus plantae. Bearing weight did not reduce interexaminer or intraexaminer reliability. All muscles exhibited a significant increase in CSA when bearing weight. This is the first report to describe weight-bearing diagnostic ultrasound of the intrinsic foot muscles. Ultrasound imaging is reliable when imaging these muscles bearing weight. Furthermore, muscle CSA increases in the weight-bearing posture. Copyright © 2016. Published by Elsevier Inc.

Eastern slopes grizzly bear project : project update

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

This report updates a study to examine the cumulative effects of human activities on the grizzly bears in the central Canadian Rockies. The project was initiated in 1994 to acquire accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of the study is used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers monitored 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers worked with representatives from Husky Oil and Rigel Energy on the development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over eight years indicates that the grizzly bears have few and infrequent offspring. Using the information gathered thus far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears suffer from high mortality, and the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The research concluded in November 2001 provides sufficient information to accurately asses the status of the grizzly bear population and habitat. The data will be analyzed and integrated in 2002 into models that reflect the variables affecting grizzly bears and a final report will be published.

Nonlinear Dynamic Response of Compliant Journal Bearings

Directory of Open Access Journals (Sweden)

Glavatskih S.

2012-07-01

Full Text Available This paper investigates the dynamic response of the compliant tilting pad journal bearings subjected to synchronous excitation. Bearing compliance is affected by the properties of pad liner and pad support geometry. Different unbalance eccentricities are considered. It is shown that bearing dynamic response is non-linear. Journal orbit complexity increases with pad compliance though the orbit amplitudes are marginally affected at low loads. At high loads, the journal is forced to operate outside the bearing clearance. The polymer liner reduces the maximum oil film pressure by a factor of 2 when compared to the white metal liner. The nonlinear dynamic response of compliant tilting pad journal bearings is thoroughly discussed.

Grizzly bear density in Glacier National Park, Montana

Science.gov (United States)

Kendall, K.C.; Stetz, J.B.; Roon, David A.; Waits, L.P.; Boulanger, J.B.; Paetkau, David

2008-01-01

We present the first rigorous estimate of grizzly bear (Ursus arctos) population density and distribution in and around Glacier National Park (GNP), Montana, USA. We used genetic analysis to identify individual bears from hair samples collected via 2 concurrent sampling methods: 1) systematically distributed, baited, barbed-wire hair traps and 2) unbaited bear rub trees found along trails. We used Huggins closed mixture models in Program MARK to estimate total population size and developed a method to account for heterogeneity caused by unequal access to rub trees. We corrected our estimate for lack of geographic closure using a new method that utilizes information from radiocollared bears and the distribution of bears captured with DNA sampling. Adjusted for closure, the average number of grizzly bears in our study area was 240.7 (95% CI = 202–303) in 1998 and 240.6 (95% CI = 205–304) in 2000. Average grizzly bear density was 30 bears/1,000 km2, with 2.4 times more bears detected per hair trap inside than outside GNP. We provide baseline information important for managing one of the few remaining populations of grizzlies in the contiguous United States.

Research on Bored Bearing Characteristics in Xi’an

Directory of Open Access Journals (Sweden)

Zhang Lipeng

2015-01-01

Full Text Available To analyze the influence of different soil properties on pile foundation load-bearing characteristics, taking a section of railway in Xi’an and a bridge of Xi’an as test area, and by field static load test to study load transfer characteristics after the test piles under axial pressure, including the distribution of axial force, pile lateral friction, tip resistance traits, ultimate bearing capacity determine, and compare with the theory bearing capacity. Experimental results show that, adjacent soil properties change large, axial force and lateral friction mutation at the junction of corresponding soil layer. Silty clay in different parts is below ground, and its lateral friction plays much difference. Pile lateral friction plays an important role in bearing capacity, but the role of round gravel soil end bearing capacity to pile bearing capacity can’t be ignored. Tests calculate pile bearing capacity significantly larger than standardized formula calculation bearing capacity, which are respectively 55.35% and 119.1%. And give the similar project condition the suggested values of pile bearing capacity and soil friction, to provide reference for similar pile foundation design.

On the future of controllable fluid film bearings

DEFF Research Database (Denmark)

Santos, Ilmar

2011-01-01

lubrication regimes, i.e., as tilting-pad journal bearings, multi-recess journal bearings and plain journal bearings. After a comprehensive overview of the theoretical and experimental technological advancements achieved in university laboratories, the feasibility of industrial applications is highlighted......This work gives an overview of the theoretical and experimental achievements of mechatronics applied to fluid film bearings. Compressible and uncompressible fluids are addressed. Rigid and elastic (deformable) bearing profiles are investigated. Hydraulic, pneumatic, magnetic and piezoelectric...

Superconducting bearings for flywheel applications

Energy Technology Data Exchange (ETDEWEB)

Abrahamsen, Asger Bech

2001-05-01

A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found on the applications of superconducting bearings in flywheels. (au)

Wear numbers for ball cup and journal bearings

NARCIS (Netherlands)

Ligterink, D.J.; Moes, H.

1980-01-01

A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in

Comparison of High-Flexion Fixed-Bearing and High-Flexion Mobile-Bearing Total Knee Arthroplasties-A Prospective Randomized Study.

Science.gov (United States)

Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik

2018-01-01

There is none, to our knowledge, about comparison of high-flexion fixed-bearing and high-flexion mobile-bearing total knee arthroplasties (TKAs) in the same patients. The purpose of this study was to determine whether clinical results; radiographic and computed tomographic scan results; and the survival rate of a high-flexion mobile-bearing TKA is better than that of a high-flexion fixed-bearing TKA. The present study consisted of 92 patients (184 knees) who underwent same-day bilateral TKA. Of those, 17 were men and 75 were women. The mean age at the time of index arthroplasty was 61.5 ± 8.3 years (range 52-65 years). The mean body mass index was 26.2 ± 3.3 kg/m 2 (range 23-34 kg/m 2 ). The mean follow-up was 11.2 years (range 10-12 years). The Knee Society knee scores (93 vs 92 points; P = .531) and function scores (80 vs 80 points; P = 1.000), WOMAC scores (14 vs 15 points; P = .972), and UCLA activity scores (6 vs 6 points; P = 1.000) were not different between the 2 groups at 12 years follow-up. There were no differences in any radiographic and CT scan parameters between the 2 groups. Kaplan-Meier survivorship of the TKA component was 98% (95% confidence interval, 93-100) in the high-flexion fixed-bearing TKA group and 99% (95% confidence interval, 94-100) in the high-flexion mobile-bearing TKA group 12 years after the operation. We found no benefit to mobile-bearing TKA in terms of pain, function, radiographic and CT scan results, and survivorship. Longer-term follow-up is necessary to prove the benefit of the high-flexion mobile-bearing TKA over the high-flexion fixed-bearing TKA. Copyright © 2017 Elsevier Inc. All rights reserved.

Kinetic and mechanisms of methanimine reactions with singlet and triplet molecular oxygen: Substituent and catalyst effects

Science.gov (United States)

Asgharzadeh, Somaie; Vahedpour, Morteza

2018-06-01

Methanimine reaction with O2 on singlet and triplet potential energy surfaces are investigated using B3PW91, M06-2X, MP2 and CCSD(T) methods. Thermodynamic and kinetic parameters are calculated at M06-2X method. The most favorable channel involves H-abstraction of CH2NH+O2 to the formation of HCN + H2O2 products via low level energy barrier. The catalytic effect of water molecule on HCN + H2O2 products pathway are investigated. Result shows that contribution of water molecule using complex formation with methanimine can decreases barrier energy of transition state and the reaction rate increases. Also, substituent effect of fluorine atom as deactivating group are investigated on the main reaction pathway.

Measurement of lower limb alignment: there are within-person differences between weight-bearing and non-weight-bearing measurement modalities.

Science.gov (United States)

Schoenmakers, Daphne A L; Feczko, Peter Z; Boonen, Bert; Schotanus, Martijn G M; Kort, Nanne P; Emans, Pieter J

2017-11-01

Previous studies have compared weight-bearing mechanical leg axis (MLA) measurements to non-weight-bearing measurement modalities. Most of these studies compared mean or median values and did not analyse within-person differences between measurements. This study evaluates the within-person agreement of MLA measurements between weight-bearing full-length radiographs (FLR) and non-weight-bearing measurement modalities (computer-assisted surgery (CAS) navigation or MRI). Two independent observers measured the MLA on pre- and postoperative weight-bearing FLR in 168 patients. These measurements were compared to non-weight-bearing measurements obtained by CAS navigation or MRI. Absolute differences in individual subjects were calculated to determine the agreement between measurement modalities. Linear regression was used to evaluate the possibility that other independent variables impact the differences in measurements. A difference was found in preoperative measurements between FLR and CAS navigation (mean of 2.5° with limit of agreement (1.96 SD) of 6.4°), as well as between FLR and MRI measurements (mean of 2.4° with limit of agreement (1.96 SD) of 6.9°). Postoperatively, the mean difference between MLA measured on FLR compared to CAS navigation was 1.5° (limit of agreement (1.96 SD) of 4.6°). Linear regression analysis showed that weight-bearing MLA measurements vary significantly from non-weight-bearing MLA measurements. Differences were more severe in patients with mediolateral instability (p = 0.010), age (p = 0.049) and ≥3° varus or valgus alignment (p = 0.008). The clinical importance of this study lies in the finding that there are within-person differences between weight-bearing and non-weight-bearing measurement modalities. This has implications for preoperative planning, performing total knee arthroplasty (TKA), and clinical follow-up after TKA surgery using CAS navigation or patient-specific instrumentation. III.

Cool Polar Bears: Dabbing on the Texture

Science.gov (United States)

O'Connell, Jean

2011-01-01

In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

Superior long-term survival for fixed bearing compared with mobile bearing in ligament-balanced total knee arthroplasty.

Science.gov (United States)

Heesterbeek, P J C; van Houten, A H; Klenk, J S; Eijer, H; Christen, B; Wymenga, A B; Schuster, A J

2018-05-01

Only few long-term data on ligament-balanced cruciate-retaining total knee arthroplasty (CR TKA) are currently available. Either a mobile- or fixed-bearing insert can be chosen, which showed good mid-term outcome and few complications and revisions. This multi-centre retrospective cross-sectional cohort study investigated the 12-year results of primary TKA using a balancing gap technique and compared survival and clinical outcome between fixed and mobile inserts. In this retrospective cross-sectional cohort study, 557 cases of three clinics (2 Swiss, 1 Dutch) operated between 1998 and 2003 with the first series of a TKA implanted with a balanced gap technique (433 (77.7%) fixed, 124 (22.3%) mobile (anterior-posterior gliding (7-9 mm) and rotational (15°) degrees of freedom) inserts) were included for survival analysis (Kaplan-Meier, by insert type). At the 12-year follow-up (FU) examination of 189 cases, range of motion, knee society score (KSS), numeric rating scale (NRS) for pain and satisfaction were determined and radiographs were evaluated by median tests, by insert type. Of 521 cases available for analysis, 28 (5.4%; 11 fixed, 17 mobile bearing) were revised. Mean cumulative survival after 12.4 years was 97.0% (95% CI 94.7-98.4) for fixed bearings and 85.4% (95% CI 77.5-90.7) after 12.2 years for mobile bearings, p bearings. This study showed a superior survival for fixed bearing compared with mobile bearing in a CR TKA using a ligament-balanced technique after more than 12 years. Clinical outcomes are excellent to good after long-term follow-up, and similar for fixed and mobile bearing. Therapeutic studies-retrospective cohort study, Level III.

On the Design of Tilting-Pad Thrust Bearings

DEFF Research Database (Denmark)

Heinrichson, Niels

2007-01-01

Pockets are often machined in the surfaces of tilting-pad thrust bearings to allow for hydrostatic jacking in the start-up phase. Pockets and other recesses in the surfaces of bearing pads influence the pressure distribution and thereby the position of the pivot resulting in the most advantageous...... based on the Reynolds equation are used. They include the effects of variations of viscosity with temperature and the deformation of the bearing pads due to pressure and thermal gradients. The models are validated using measurements. Tilting-pad bearings of standard design are studied and the influences...... of the friction loss. Both this bearing and the bearing design with enclosed recesses in the high-pressure regions of the pads suffer from a higher sensitivity to the position of the pivot. The design of such bearing is therefore no trivial task....

Bearing Health Assessment Based on Chaotic Characteristics

Directory of Open Access Journals (Sweden)

Chen Lu

2013-01-01

Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

13C nuclear magnetic resonance data of lanosterol derivatives—Profiling the steric topology of the steroid skeleton via substituent effects on its 13C NMR

Science.gov (United States)

Dias, Jerry Ray; Gao, Hongwu

2009-12-01

The 13C NMR spectra of over 24 tetracyclic triterpenoid derivatives have been structurally analyzed. The 13C NMR chemical shifts allow one to probe the steric topology of the rigid steroid skeleton and inductive effects of its substituents. Use of deuterium labeling in chemical shift assignment and B-ring aromatic terpenoids are also featured.

Mechanical design problems associated with turbopump fluid film bearings

Science.gov (United States)

Evces, Charles R.

1990-01-01

Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

Partial tooth gear bearings

Science.gov (United States)

Vranish, John M. (Inventor)

2010-01-01

A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

Bulky PAH-DNA induced by exposure of a co-culture model of human alveolar macrophages and embryonic epithelial cells to atmospheric particulate pollution; Adduits encombrants a l'ADN dans des cocultures de cellules pulmonaires humaines exposees a une pollution atmospherique particulaire

Energy Technology Data Exchange (ETDEWEB)

Abbas, Imane; Garcon, Guillaume; Billet, Sylvain; Shirali, Pirouz [Universite Lille Nord de France - Lille (France); Unite de Chimie Environnementale et Interactions sur le Vivant, MREI, Universite du Littoral Cote d' Opale, Dunkerque (France); Andre, Veronique; Le Goff, Jeremie; Sichel, Francois [GRECAN, Universite de Caen Basse-Normandie et centre Francois Baclesse, Caen (France); Roy Saint-Georges, Francoise; Mulliez, Philippe [Service de Pneumologie, Hopital Saint-Philibert, GHICL, Lille (France)

2012-01-15

Because of their deep penetration in human lungs, fine airborne particulate matter were described as mainly responsible for the deleterious effects of exposure to air pollution on health. Organic constituents are adsorbed on particles surface and, after inhalation, some (polycyclic aromatic hydrocarbons, PAHs) can be activated into reactive metabolites and can bind to DNA. The formation of bulky DNA adducts has been researched after exposure of mono-and co-cultures of alveolar macrophages (AM) and human embryonic human lung epithelial (L132), to fine air pollution particulate matter Air samples have been collected with cascade impactor and characterized: size distribution (92.15% < 2.5{mu}.m), specific surface area (1 m{sup 2}/g), inorganic (Fe, AI, Ca, Na, K, Mg, Pb, etc.) and organic compounds (PAHs, etc.). {sup 32}P post-labeling method was applied to detect bulky DNA adducts in AM and L132, in mono-and co-cultures, 72 h after their exposure to atmospheric particles at their Lethals and Effects concentrations or (LC or CE) to 50% (i.e. MA: EC{sub 50} = 74.63 {mu}g/mL and L132: LC-5-0 = 75.36 {mu}g/mL). Exposure to desorbed particles (MA: C1= 61.11 {mu}g/mL and L132 : C2 = 61.71 {mu}g/mL) and B[a]P (1 {mu}M) were included. Bulky PAH-DNA adducts were detected in AM in mono-culture after exposure to total particles (Pt), to B[a]P and desorbed particles (Pd). Whatever the exposure, no DNA adduct was detected in L132 in mono-culture. These results are coherent with the enzymatic activities of cytochrome P450 l Al in AM and L132. Exposure of co-culture to Pt, or Pd induced bulky adducts to DNA in AM but not in L132. Exposure to B[a]P alone has altered the DNA of AM and L132, in co-culture. Exposure to Pt is closer to the environmental conditions, but conferred an exposure to amounts of genotoxic agents compared to studies using organic extracts. The formation of bulky DNA adducts was nevertheless observed in AM exposed to Pt, in mono- or co-culture, indicating that

What Can We Learn?--The Algonquin Bear Attack.

Science.gov (United States)

Strickland, Dan

1992-01-01

Describes a bear attack in Algonquin Park in Lake Opeongo (Canada) in which a man and woman were killed. Hypothesizes that the bear deliberately preyed on its victims and concludes that the bear was physically normal. Despite this isolated attack, the chance of being attacked by a black bear when camping is virtually nonexistent. (KS)

7 CFR 761.53 - Interest bearing accounts.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Interest bearing accounts. 761.53 Section 761.53... AGRICULTURE SPECIAL PROGRAMS GENERAL PROGRAM ADMINISTRATION Supervised Bank Accounts § 761.53 Interest bearing accounts. (a) A supervised bank account, if possible, will be established as an interest bearing deposit...

Active magnetic bearings: As applied to centrifugal pumps

Science.gov (United States)

Nelik, Lev; Cooper, Paul; Jones, Graham; Galecki, Dennis; Pinckney, Frank; Kirk, Gordon

1992-05-01

Application of magnetic bearings to boiler feed pumps presents various attractive features, such as longer bearing life, lower maintenance costs, and improved operability through control of the rotordynamics. Magnetic bearings were fitted to an eight-stage, 600 hp boiler feed pump, which generates 2600 ft of heat at 680 gpm and 3560 rpm. In addition to the varied and severe operating environment in steady state operation of this pump in a power plant, it is also subjected to transient loads during frequent starts and stops. These loads can now be measured by the in-built instrumentation of the magnetic bearings. Following site installation, a follow-up bearing tune-up was performed, and pump transient response testing was conducted. The bearing response was completely satisfactory, ensuring trouble-free pump operation even in the range of reduced load. The experience gained so far through design and testing proves feasibility of magnetic bearings for boiler feed pumps, which sets the stage for application of even higher energy centrifugal pumps equipped with magnetic bearings.

The role of DNA polymerase ζ in translesion synthesis across bulky DNA adducts and cross-links in human cells

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Tetsuya, E-mail: suzukite@hiroshima-u.ac.jp [Division of Genetics and Mutagenesis, National Institute of Health Sciences, 1-18-1 Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Grúz, Petr; Honma, Masamitsu [Division of Genetics and Mutagenesis, National Institute of Health Sciences, 1-18-1 Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Adachi, Noritaka [Graduate School of Nanobioscience, Yokohama City University, 22-2 Seto, Kanazawa-ku, Yokohama 236-0027 (Japan); Nohmi, Takehiko [Division of Genetics and Mutagenesis, National Institute of Health Sciences, 1-18-1 Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan)

2016-09-15

Highlights: • Human cells knockout (KO) and expressing catalytically dead (CD) variant of DNA polymerase ζ (Pol ζ) have been established by gene targeting techniques with Nalm-6 cells. • Both Pol ζ KO and CD cells displayed prolonged cell cycle and higher incidence of micronucleus formation than the wild-type cells in the absence of exogenous genotoxic treatments. • Pol ζ protects human cells from genotoxic stresses that induce bulky DNA lesions and cross-links. • Pol ζ plays quite limited roles in protection against strand-breaks in DNA. - Abstract: Translesion DNA synthesis (TLS) is a cellular defense mechanism against genotoxins. Defects or mutations in specialized DNA polymerases (Pols) involved in TLS are believed to result in hypersensitivity to various genotoxic stresses. Here, DNA polymerase ζ (Pol ζ)-deficient (KO: knockout) and Pol ζ catalytically dead (CD) human cells were established and their sensitivity towards cytotoxic activities of various genotoxins was examined. The CD cells were engineered by altering the DNA sequence encoding two amino acids essential for the catalytic activity of Pol ζ, i.e., D2781 and D2783, to alanines. Both Pol ζ KO and CD cells displayed a prolonged cell cycle and higher incidence of micronuclei formation than the wild-type (WT) cells in the absence of exogenous genotoxic treatments, and the order of abnormality was CD > KO > WT cells. Both KO and CD cells exhibited higher sensitivity towards the killing effects of benzo[a]pyrene diol epoxide, mitomycin C, potassium bromate, N-methyl-N′-nitro-N-nitrosoguanidine, and ultraviolet C irradiation than WT cells, and there were no differences between the sensitivities of KO and CD cells. Interestingly, neither KO nor CD cells were sensitive to the cytotoxic effects of hydrogen peroxide. Since KO and CD cells displayed similar sensitivities to the genotoxins, we employed only KO cells to further examine their sensitivity to other genotoxic agents. KO cells were

The role of DNA polymerase ζ in translesion synthesis across bulky DNA adducts and cross-links in human cells

International Nuclear Information System (INIS)

Suzuki, Tetsuya; Grúz, Petr; Honma, Masamitsu; Adachi, Noritaka; Nohmi, Takehiko

2016-01-01

Highlights: • Human cells knockout (KO) and expressing catalytically dead (CD) variant of DNA polymerase ζ (Pol ζ) have been established by gene targeting techniques with Nalm-6 cells. • Both Pol ζ KO and CD cells displayed prolonged cell cycle and higher incidence of micronucleus formation than the wild-type cells in the absence of exogenous genotoxic treatments. • Pol ζ protects human cells from genotoxic stresses that induce bulky DNA lesions and cross-links. • Pol ζ plays quite limited roles in protection against strand-breaks in DNA. - Abstract: Translesion DNA synthesis (TLS) is a cellular defense mechanism against genotoxins. Defects or mutations in specialized DNA polymerases (Pols) involved in TLS are believed to result in hypersensitivity to various genotoxic stresses. Here, DNA polymerase ζ (Pol ζ)-deficient (KO: knockout) and Pol ζ catalytically dead (CD) human cells were established and their sensitivity towards cytotoxic activities of various genotoxins was examined. The CD cells were engineered by altering the DNA sequence encoding two amino acids essential for the catalytic activity of Pol ζ, i.e., D2781 and D2783, to alanines. Both Pol ζ KO and CD cells displayed a prolonged cell cycle and higher incidence of micronuclei formation than the wild-type (WT) cells in the absence of exogenous genotoxic treatments, and the order of abnormality was CD > KO > WT cells. Both KO and CD cells exhibited higher sensitivity towards the killing effects of benzo[a]pyrene diol epoxide, mitomycin C, potassium bromate, N-methyl-N′-nitro-N-nitrosoguanidine, and ultraviolet C irradiation than WT cells, and there were no differences between the sensitivities of KO and CD cells. Interestingly, neither KO nor CD cells were sensitive to the cytotoxic effects of hydrogen peroxide. Since KO and CD cells displayed similar sensitivities to the genotoxins, we employed only KO cells to further examine their sensitivity to other genotoxic agents. KO cells were

49 CFR 230.102 - Tender plain bearing journal boxes.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

Trichinella and polar bears: a limited risk for humans.

Science.gov (United States)

Dupouy-Camet, J; Bourée, P; Yera, H

2017-07-01

In this review, we identified 63 cases reported since World War II of human trichinellosis linked to the consumption of parasitized polar bear (Ursus maritimus) meat. This low number contrasts to the numerous cases of human trichinellosis related to consumption of the meat of black (U. americanus) or brown bears (U. arctos). The prevalence of Trichinella infection is high in bears, but larval muscular burden is usually lower in polar bears compared to other bear species. Polar bears, therefore, seem to play a limited role in the transmission of trichinellosis to humans, as native residents living in the Arctic traditionally consume well-cooked bear meat, and travellers and foreign hunters have only limited access to this protected species due to the declining polar bear population.

Public Perceptions of Bears and Management Interventions in Japan

OpenAIRE

Sakurai, Ryo; Jacobson, Susan K.

2011-01-01

Conservation of bears is a challenge globally. In Japan, Asiatic black bears (Ursus thibetanus) and brown bears (Ursus arctos) are considered a nuisance because of agricultural and property damage and personal human danger due to occasional human casualties. Reduction of human–bear conflicts in Japan would improve long-term conservation of bears and reduce risks to human health and safety. To understand Japanese perceptions of and experience with bears, we analyzed results of 5 public surveys...

Geometric modeling in the problem of ball bearing accuracy

Science.gov (United States)

Glukhov, V. I.; Pushkarev, V. V.; Khomchenko, V. G.

2017-06-01

The manufacturing quality of ball bearings is an urgent problem for machine-building industry. The aim of the research is to improve the geometric specifications accuracy of bearings based on evidence-based systematic approach and the method of adequate size, location and form deviations modeling of the rings and assembled ball bearings. The present work addressed the problem of bearing geometric specifications identification and the study of these specifications. The deviation from symmetric planar of rings and bearings assembly and mounting width are among these specifications. A systematic approach to geometric specifications values and ball bearings tolerances normalization in coordinate systems will improve the quality of bearings by optimizing and minimizing the number of specifications. The introduction of systematic approach to the international standards on rolling bearings is a guarantee of a significant increase in accuracy of bearings and the quality of products where they are applied.

Foothills model forest grizzly bear study : project update

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-01-01

This report updates a five year study launched in 1999 to ensure the continued healthy existence of grizzly bears in west-central Alberta by integrating their needs into land management decisions. The objective was to gather better information and to develop computer-based maps and models regarding grizzly bear migration, habitat use and response to human activities. The study area covers 9,700 square km in west-central Alberta where 66 to 147 grizzly bears exist. During the first 3 field seasons, researchers captured and radio collared 60 bears. Researchers at the University of Calgary used remote sensing tools and satellite images to develop grizzly bear habitat maps. Collaborators at the University of Washington used trained dogs to find bear scat which was analyzed for DNA, stress levels and reproductive hormones. Resource Selection Function models are being developed by researchers at the University of Alberta to identify bear locations and to see how habitat is influenced by vegetation cover and oil, gas, forestry and mining activities. The health of the bears is being studied by researchers at the University of Saskatchewan and the Canadian Cooperative Wildlife Health Centre. The study has already advanced the scientific knowledge of grizzly bear behaviour. Preliminary results indicate that grizzlies continue to find mates, reproduce and gain weight and establish dens. These are all good indicators of a healthy population. Most bear deaths have been related to poaching. The study will continue for another two years. 1 fig.

Superconductor bearings, flywheels and transportation

International Nuclear Information System (INIS)

Werfel, F N; Floegel-Delor, U; Rothfeld, R; Riedel, T; Goebel, B; Wippich, D; Schirrmeister, P

2012-01-01

This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS–FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN 2 . More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

Superconducting Meissner effect bearings for cryogenic turbomachines, phase 2

Science.gov (United States)

Valenzuela, Javier A.; Martin, Jerry L.

1994-02-01

This is the final report of a Phase 2 SBIR project to develop Meissner effect bearings for miniature cryogenic turbomachines. The bearing system was designed for use in miniature cryogenic turboexpanders in reverse-Brayton-cycle cryocoolers. The cryocoolers are designed to cool sensors on satellites. Existing gas bearings for this application run in a relatively warm state. The heat loss from the bearings into the shaft and into the cold process gas imposes a penalty on the cycle efficiency. By using cold Meissner effect bearings, this heat loss could be minimized, and the input power per unit of cooling for these cryocoolers could be reduced. Two bearing concepts were explored in this project. The first used an all-magnetic passive radial suspension to position the shaft over a range of temperatures from room temperature to 77 K. This bearing concept was proven to be feasible, but impractical for the miniature high-speed turbine application since it lacked the required shaft positioning accuracy. A second bearing concept was then developed. In this concept, the Meissner effect bearings are combined with self-acting gas bearings. The Meissner effect bearing provides the additional stiffness and damping required to stabilize the shaft at low temperature, while the gas bearing provides the necessary accuracy to allow very small turbine tip clearances (5mm) and high speeds (greater than 500,000 rpm).

BIOASSAY STUDIES OF METAL(II) COMPLEXES OF 2,2'-(ETHANE ...

African Journals Online (AJOL)

Preferred Customer

diyldiimino)diacetic acid (EDDA) were prepared and characterized. Coordination complexes of the EDDA ... corresponding amines with alkyl halide to bear diammines of the same class with different substituents. ... Bioassay studies of metal(II) complexes of 2,2'-(ethane-1,2-diyldiimino)diacetic acid. Bull. Chem. Soc. Ethiop.

29 CFR 780.124 - Raising of fur-bearing animals.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Raising of fur-bearing animals. 780.124 Section 780.124... General Scope of Agriculture Raising of Livestock, Bees, Fur-Bearing Animals, Or Poultry § 780.124 Raising of fur-bearing animals. (a) The term “fur-bearing animals” has reference to animals which bear fur of...

Polar bears and sea ice habitat change

Science.gov (United States)

Durner, George M.; Atwood, Todd C.; Butterworth, Andy

2017-01-01

The polar bear (Ursus maritimus) is an obligate apex predator of Arctic sea ice and as such can be affected by climate warming-induced changes in the extent and composition of pack ice and its impacts on their seal prey. Sea ice declines have negatively impacted some polar bear subpopulations through reduced energy input because of loss of hunting habitats, higher energy costs due to greater ice drift, ice fracturing and open water, and ultimately greater challenges to recruit young. Projections made from the output of global climate models suggest that polar bears in peripheral Arctic and sub-Arctic seas will be reduced in numbers or become extirpated by the end of the twenty-first century if the rate of climate warming continues on its present trajectory. The same projections also suggest that polar bears may persist in the high-latitude Arctic where heavy multiyear sea ice that has been typical in that region is being replaced by thinner annual ice. Underlying physical and biological oceanography provides clues as to why polar bear in some regions are negatively impacted, while bears in other regions have shown no apparent changes. However, continued declines in sea ice will eventually challenge the survival of polar bears and efforts to conserve them in all regions of the Arctic.

Hybrid bearings for LH2 and LO2 turbopumps

Science.gov (United States)

Butner, M. F.; Lee, F. C.

1985-01-01

Hybrid combinations of hydrostatic and ball bearings can improve bearing performance for liquid hydrogen and liquid oxygen turbopumps. Analytic studies were conducted to optimize hybrid bearing designs for the SSME-type turbopump conditions. A method to empirically determine damping coefficients was devised. Four hybrid bearing configurations were designed, and three were fabricated. Six hybrid and hydrostatic-only bearing configurations will be tested for steady-state and transient performance, and quantification of damping coefficients. The initial tests were conducted with the liquid hydrogen bearing.

Evaluation of ball and roller bearings restored by grinding

Science.gov (United States)

Parker, R. J.; Zaretsky, E. V.; Chen, S. M.

1976-01-01

A joint program was undertaken to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

The dynamic state monitoring of bearings system

Directory of Open Access Journals (Sweden)

Marek Krynke

2015-03-01

Full Text Available The article discusses the methods of dynamic state monitoring of bearings system. A vibration signal contains important technical information about the machine condition and is currently the most frequently used in diagnostic bearings systems. One of the main ad-vantages of machine condition monitoring is identifying the cause of failure of the bearings and taking preventative measures, otherwise the operation of such a machine will lead to frequent replacement of the bearings. Monitoring changes in the course of the operation of machin-ery repair strategies allows keeping the conditioned state of dynamic failure conditioned preventive repairs and repairs after-failure time. In addition, the paper also presents the fundamental causes of bearing failure and identifies mechanisms related to the creation of any type of damage.

Efficient approach to androstene-fused arylpyrazolines as potent antiproliferative agents. Experimental and theoretical studies of substituent effects on BF(3)-catalyzed intramolecular [3 + 2] cycloadditions of olefinic phenylhydrazones.

Science.gov (United States)

Frank, Eva; Mucsi, Zoltán; Zupkó, István; Réthy, Borbála; Falkay, George; Schneider, Gyula; Wölfling, János

2009-03-25

Highly diastereoselective Lewis acid induced intramolecular 1,3-dipolar cycloadditions of alkenyl phenylhydrazones (containing various substituents on the aromatic ring) obtained from a d-secopregnene aldehyde were carried out under fairly mild conditions to furnish androst-5-ene-fused arylpyrazolines in good to excellent yields. The ability of phenylhydrazones to undergo cyclization was found to be affected significantly by the electronic features of the substituents on the aromatic moiety. The rates of the ring-closure reactions were observed to be increased by electron-donating and decreased by electron-withdrawing groups. The experimental findings on the BF(3)-catalyzed transformations were supported by calculations of the proposed mechanism at the BLYP/6-31G(d) level of theory, indicating a noteworthy dependence, mainly of the initial complexation step, and hence of the whole process, on the character of the substituent. The cycloaddition was estimated to occur via a zwitterionic intermediate rather than involving a pure concerted mechanism. The antiproliferative activities of the structurally related pyrazoline derivatives were tested in vitro on three malignant human cell lines (HeLa, MCF7, and A431): the microculture tetrazolium assay revealed that several compounds exerted marked cell growth-inhibitory effects. The highest cytotoxic activities, displayed by the p-methoxyphenylpyrazoline derivative 7d (IC(50) values: 2.01, 2.16, and 1.41 microM on HeLa, MCF7, and A341 cells, respectively), were better than those of cisplatin (IC(50) values: 12.43, 9.63, and 2.84 microM, respectively).

Integrated smart bearings for next generation aero-engines Part 1: Development of a sensor suite for automatic bearing health monitoring

OpenAIRE

Bashir, Imran; Wang, Ling; Harvey, Terence; Zaghari, Bahareh; Weddell, Alexander; White, Neil

2017-01-01

The development of smart bearing solutions will contribute to increased aircraft engine reliability, allowing the early detection of bearing failure through robust health monitoring. This project aims to develop intelligent bearing systems for an Ultra High Propulsion Efficiency (UHPE) ground test demonstrator, where a fully integrated self-powered wireless sensing system will be developed for future aircraft. This paper provides a comprehensive review of the state-of-the-art smart bearing te...

Distributed bearing fault diagnosis based on vibration analysis

Science.gov (United States)

Dolenc, Boštjan; Boškoski, Pavle; Juričić, Đani

2016-01-01

Distributed bearing faults appear under various circumstances, for example due to electroerosion or the progression of localized faults. Bearings with distributed faults tend to generate more complex vibration patterns than those with localized faults. Despite the frequent occurrence of such faults, their diagnosis has attracted limited attention. This paper examines a method for the diagnosis of distributed bearing faults employing vibration analysis. The vibrational patterns generated are modeled by incorporating the geometrical imperfections of the bearing components. Comparing envelope spectra of vibration signals shows that one can distinguish between localized and distributed faults. Furthermore, a diagnostic procedure for the detection of distributed faults is proposed. This is evaluated on several bearings with naturally born distributed faults, which are compared with fault-free bearings and bearings with localized faults. It is shown experimentally that features extracted from vibrations in fault-free, localized and distributed fault conditions form clearly separable clusters, thus enabling diagnosis.

49 CFR 215.115 - Defective roller bearing.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective roller bearing. 215.115 Section 215.115... § 215.115 Defective roller bearing. (a) A railroad may not place or continue in service a car, if the car has— (1) A roller bearing that shows signs of having been overheated as evidenced by— (i...

Trends in Controllable Oil Film Bearings

DEFF Research Database (Denmark)

Santos, Ilmar

2011-01-01

This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

Polar bears: the fate of an icon.

Science.gov (United States)

Fitzgerald, Kevin T

2013-11-01

Polar bears are one of the most iconic animals on our planet. Worldwide, even people who would never see one are drawn to these charismatic arctic ice hunters. They are the world's largest terrestrial carnivore, and despite being born on land, they spend most of their lives out on the sea ice and are considered a marine mammal. Current global studies estimate there are around 20,000 animals in some 19 discrete circumpolar populations. Aside from pregnant females denning in the winter months to give birth, the white bears do not hibernate. They spend their winters on the sea ice hunting seals, an activity they are spectacularly adapted for. Research on these animals is incredibly difficult because of the inhospitable surroundings they inhabit and how inaccessible they make the bears. For many years, the sum of our understanding of the natural history of polar bears came from tracks, scats, the remains of their kills, abandoned dens, and anecdotal observations of native hunters, explorers, and early biologists. Nonetheless, the last 40 years have seen a much better picture of their biology emerge thanks to, first, dedicated Canadian researchers and, later, truly international efforts of workers from many countries. Veterinarians have contributed to our knowledge of the bears by delivering and monitoring anesthesia, obtaining blood samples, performing necropsies, investigating their reproduction, conducting radiotelemetry studies, and examining their behavior. Recently, new technologies have been developed that revolutionize the study of the lives and natural history of undisturbed polar bears. These advances include better satellite radiotelemetry equipment and the development of remote-controlled miniature devices equipped with high-definition cameras. Such new modalities provide dramatic new insights into the life of polar bears. The remarkable degree of specialized adaptation to life on the sea ice that allowed the bears to be successful is the very reason that

Lubrication of Space Shuttle Main Engine Turbopump Bearings

Science.gov (United States)

Gibson, Howard; Munafo, Paul (Technical Monitor)

2001-01-01

The Space Shuttle has three main engines that are used for propulsion into orbit. These engines are fed propellants by four turbopumps on each engine. A main element in the turbopump is the bearings supporting the rotor that spins the turbine blades and the pump impeller. These bearings are required to spin at very high speeds, support radial and thrust loads, and have high wear resistance without the benefit of lubrication. The liquid hydrogen and oxygen propellants flow through the bearings to cool the surfaces. The volatile nature of the propellants excludes any conventional means of lubrication. Lubrication for these bearings is provided by the ball separator inside the bearing. The separator is a composite material that supplies a transfer film of lubrication to the rings and balls. New separator materials and lubrication schemes have been investigated at Marshall Space Flight Center in a bearing test rig with promising results. Hybrid bearings with silicon nitride balls have also been evaluated. The use of hybrid, silicon nitride ball bearings in conjunction -with better separator materials has shown excellent results. The work that Marshall has done is being utilized in turbopumps flying on the space shuttle fleet and will be utilized in future space travel. This result of this work is valuable for all aerospace and commercial applications where high-speed bearings are used.

Centrifuge advances using HTS magnetic bearings

Science.gov (United States)

Werfel, F. N.; Flögel-Delor, U.; Rothfeld, R.; Wippich, D.; Riedel, T.

2001-05-01

Passive magnetic bearings are of increasing technical interest. We performed experiments with centrifugal rotors to analyze gyroscopic forces in terms imbalance, rotor elasticity and damping. Centrifuge rotors need to be operated soft and stable without whirling the sediments. In order to evaluate optimal parameters critical and resonance behaviors are investigated. Eccentricities up 2 mm are safely passed by accelerating test wheels. In a simple model we describe the effect of passing critical rotational speeds. Measurements of bearing properties and wheel performance are presented. We have constructed a first prototype centrifuge designed with a HTS double bearing which operates a titanium rotor safely up to 30 000 rpm. A 15 W Stirling cooler serves cryogenics of the YBCO stators. From the experiments design guidelines for centrifugal applications with HTS bearings are given.

Bear bile: dilemma of traditional medicinal use and animal protection

Directory of Open Access Journals (Sweden)

Nagamatsu Tadashi

2009-01-01

Full Text Available Abstract Bear bile has been used in Traditional Chinese Medicine (TCM for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future.

Bear bile: dilemma of traditional medicinal use and animal protection

Science.gov (United States)

Feng, Yibin; Siu, Kayu; Wang, Ning; Ng, Kwan-Ming; Tsao, Sai-Wah; Nagamatsu, Tadashi; Tong, Yao

2009-01-01

Bear bile has been used in Traditional Chinese Medicine (TCM) for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future. PMID:19138420

Big bearings. Unsung hero; Kyodaina jikuuke. Hitome ni tsukanai hatarakimono

Energy Technology Data Exchange (ETDEWEB)

Nanba, S. [Koyo Seiko Co. Ltd., Osaka (Japan)

1997-03-05

This paper introduces examples of the use of big bearings. Bearings are divided largely into those used for radial load supporting and those used for thrust load supporting, while big bearings are often used for the latter usage. Thrust bearings include a cutter heat supporting bearing for tunnel excavator working underground, in addition to those used for swing motion of parabolic antennas and tower cranes. A bearing used in an excavator has an outer diameter of about half that of the excavator. The outer diameter of a shielding machine practically used in tunnel drilling currently has an outer diameter of 14,140 mm, and the outer diameter of the bearing is 7200 mm (bearing weighing 45 tons). Other big thrust bearings may include a swing tower swinging thrust bearing used in a continuous casting facility. Big radial bearings are used in iron and steel making facilities. This paper describes two examples of bearings used in this application. A spherical roller bearing to support converter trunion should be of an ultra big size to withstand total weight of about 1400 tons composed of a converter weight and weight of steel to be processed. A four-row cylindrical roller bearing to support the backup roll of a thick plate rolling mill is a bearing with durability against large loads to support reduction rolls whose size have become increasingly large. 2 refs., 5 figs.

Substituent effects on furan-phenylene copolymer for photovoltaic improvement: A density functional study

Science.gov (United States)

Janprapa, Nuttaporn; Vchirawongkwin, Viwat; Kritayakornupong, Chinapong

2018-06-01

The structural, electronic and photovoltaic properties of furan-phenylene copolymer ((Fu-co-Ph)4) and its derivatives were evaluated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT). The calculated band gaps of pristine furan and phenylene are in good agreement with the available experimental data. The lower band gap value of 2.72 eV was obtained from -NO2 and -NHCH3 substituents, leading to broader solar absorption range. With respected to the reorganization energy, -OCH3, -NHCH3, -OH, -SCH3, -CH3, -CF3, -NO2, and -F substituted (Fu-co-Ph)4 structures were classified as better electron donor materials. For combination with PC61BM, -NO2, -CN, -CF3 and -F functionalized copolymers demonstrated significantly higher open circuit voltage (Voc) values ranging from 1.07 to 2.10 eV. Our results revealed that electron withdrawing group substitution on furan-phenylene copolymers was an effective way for improving electronic and optical properties of donor materials used in photovoltaic applications.

Oak-Black Bear Relationships in Southeastern Uplands

Science.gov (United States)

Joseph D. Clark

2004-01-01

Bears (Ursus americanus) primarily occur in upland habitats in the Southeast because uplands were the last to be developed for agriculture and were more likely to become publicly owned. National parks and forests created in the early to mid-1900s served as sources to supply surrounding uplands with bears. Bears could not survive in southeastern...

49 CFR 215.111 - Defective plain bearing.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing. 215.111 Section 215.111... § 215.111 Defective plain bearing. A railroad may not place or continue in service a car, if the car has a plain bearing— (a) That is missing, cracked, or broken; (b) On which the bearing liner— (1) Is...

A preliminary investigation into textural features of intratumoral metabolic heterogeneity in 18F-FDG PET for overall survival prognosis in patients with bulky cervical cancer treated with definitive concurrent chemoradiotherapy

Science.gov (United States)

Ho, Kung-Chu; Fang, Yu-Hua Dean; Chung, Hsiao-Wen; Yen, Tzu-Chen; Ho, Tsung-Ying; Chou, Hung-Hsueh; Hong, Ji-Hong; Huang, Yi-Ting; Wang, Chun-Chieh; Lai, Chyong-Huey

2016-01-01

We examined the role of intratumoral metabolic heterogeneity on 18F-FDG PET during concurrent chemoradiotherapy (CCRT) in predicting survival outcomes for patients with cervical cancer. This prospective study consisted of 44 patients with bulky (≥ 4 cm) cervical cancer treated with CCRT. All patients underwent serial 18F-FDG PET studies. Primary cervical tumor standardized uptake values, metabolic tumor volume, and total lesion glycolysis (TLG) were measured in pretreatment and intra-treatment (2 weeks) PET scans. Regional textural features were analyzed using the grey level run length encoding method (GLRLM) and grey-level size zone matrix. Associations between PET parameters and overall survival (OS) were tested by Kaplan-Meier analysis and Cox regression model. In univariate analysis, pretreatment grey-level nonuniformity (GLNU) > 48 by GLRLM textural analysis and intra-treatment decline of run length nonuniformity 48 and a ∆TLG ≤ 60% as the high-risk group and the other patients as the low-risk. The 5-year OS rate for the high-risk group was significantly worse than that for the low-risk group (42% vs. 81%, respectively, P = 0.001). The heterogeneity of intratumoral FDG distribution and the early temporal change in TLG may be an important predictor for OS in patients with bulky cervical cancer. This gives the opportunity to adjust individualized regimens early in the treatment course. PMID:27508103

A preliminary investigation into textural features of intratumoral metabolic heterogeneity in (18)F-FDG PET for overall survival prognosis in patients with bulky cervical cancer treated with definitive concurrent chemoradiotherapy.

Science.gov (United States)

Ho, Kung-Chu; Fang, Yu-Hua Dean; Chung, Hsiao-Wen; Yen, Tzu-Chen; Ho, Tsung-Ying; Chou, Hung-Hsueh; Hong, Ji-Hong; Huang, Yi-Ting; Wang, Chun-Chieh; Lai, Chyong-Huey

2016-01-01

We examined the role of intratumoral metabolic heterogeneity on (18)F-FDG PET during concurrent chemoradiotherapy (CCRT) in predicting survival outcomes for patients with cervical cancer. This prospective study consisted of 44 patients with bulky (≥ 4 cm) cervical cancer treated with CCRT. All patients underwent serial (18)F-FDG PET studies. Primary cervical tumor standardized uptake values, metabolic tumor volume, and total lesion glycolysis (TLG) were measured in pretreatment and intra-treatment (2 weeks) PET scans. Regional textural features were analyzed using the grey level run length encoding method (GLRLM) and grey-level size zone matrix. Associations between PET parameters and overall survival (OS) were tested by Kaplan-Meier analysis and Cox regression model. In univariate analysis, pretreatment grey-level nonuniformity (GLNU) > 48 by GLRLM textural analysis and intra-treatment decline of run length nonuniformity 48 and a ∆TLG ≤ 60% as the high-risk group and the other patients as the low-risk. The 5-year OS rate for the high-risk group was significantly worse than that for the low-risk group (42% vs. 81%, respectively, P = 0.001). The heterogeneity of intratumoral FDG distribution and the early temporal change in TLG may be an important predictor for OS in patients with bulky cervical cancer. This gives the opportunity to adjust individualized regimens early in the treatment course.

Technical Development Path for Gas Foil Bearings

Science.gov (United States)

Dellacorte, Christopher

2016-01-01

Foil gas bearings are in widespread commercial use in air cycle machines, turbocompressors and microturbine generators and are emerging in more challenging applications such as turbochargers, auxiliary power units and propulsion gas turbines. Though not well known, foil bearing technology is well over fifty years old. Recent technological developments indicate that their full potential has yet to be realized. This paper investigates the key technological developments that have characterized foil bearing advances. It is expected that a better understanding of foil gas bearing development path will aid in future development and progress towards more advanced applications.

Highly Active and Isospecific Styrene Polymerization Catalyzed by Zirconium Complexes Bearing Aryl-substituted [OSSO]-Type Bis(phenolate Ligands

Directory of Open Access Journals (Sweden)

Norio Nakata

2016-01-01

Full Text Available [OSSO]-type dibenzyl zirconium(IV complexes 9 and 10 possessing aryl substituents ortho to the phenoxide moieties (ortho substituents, phenyl and 2,6-dimethylphenyl (Dmp were synthesized and characterized. Upon activation with dMAO (dried methylaluminoxane, complex 9 was found to promote highly isospecific styrene polymerizations ([mm] = 97.5%–99% with high molecular weights Mw up to 181,000 g·mmol−1. When the Dmp-substituted pre-catalyst 10/dMAO system was used, the highest activity, over 7700 g·mmol(10−1·h−1, was recorded involving the formation of precisely isospecific polystyrenes of [mm] more than 99%.

Grizzly bear diet shifting on reclaimed mines

Directory of Open Access Journals (Sweden)

Bogdan Cristescu

2015-07-01

Full Text Available Industrial developments and reclamation change habitat, possibly altering large carnivore food base. We monitored the diet of a low-density population of grizzly bears occupying a landscape with open-pit coal mines in Canada. During 2009–2010 we instrumented 10 bears with GPS radiocollars and compared their feeding on reclaimed coal mines and neighboring Rocky Mountains and their foothills. In addition, we compared our data with historical bear diet for the same population collected in 2001–2003, before extensive mine reclamation occurred. Diet on mines (n=331 scats was dominated by non-native forbs and graminoids, while diets in the Foothills and Mountains consisted primarily of ungulates and Hedysarum spp. roots respectively, showing diet shifting with availability. Field visitation of feeding sites (n=234 GPS relocation clusters also showed that ungulates were the main diet component in the Foothills, whereas on reclaimed mines bears were least carnivorous. These differences illustrate a shift to feeding on non-native forbs while comparisons with historical diet reveal emergence of elk as an important bear food. Food resources on reclaimed mines attract bears from wilderness areas and bears may be more adaptable to landscape change than previously thought. The grizzly bear’s ready use of mines cautions the universal view of this species as umbrella indicative of biodiversity.

Diet and Macronutrient Optimization in Wild Ursids: A Comparison of Grizzly Bears with Sympatric and Allopatric Black Bears.

Science.gov (United States)

Costello, Cecily M; Cain, Steven L; Pils, Shannon; Frattaroli, Leslie; Haroldson, Mark A; van Manen, Frank T

2016-01-01

When fed ad libitum, ursids can maximize mass gain by selecting mixed diets wherein protein provides 17 ± 4% of digestible energy, relative to carbohydrates or lipids. In the wild, this ability is likely constrained by seasonal food availability, limits of intake rate as body size increases, and competition. By visiting locations of 37 individuals during 274 bear-days, we documented foods consumed by grizzly (Ursus arctos) and black bears (Ursus americanus) in Grand Teton National Park during 2004-2006. Based on published nutritional data, we estimated foods and macronutrients as percentages of daily energy intake. Using principal components and cluster analyses, we identified 14 daily diet types. Only 4 diets, accounting for 21% of days, provided protein levels within the optimal range. Nine diets (75% of days) led to over-consumption of protein, and 1 diet (3% of days) led to under-consumption. Highest protein levels were associated with animal matter (i.e., insects, vertebrates), which accounted for 46-47% of daily energy for both species. As predicted: 1) daily diets dominated by high-energy vertebrates were positively associated with grizzly bears and mean percent protein intake was positively associated with body mass; 2) diets dominated by low-protein fruits were positively associated with smaller-bodied black bears; and 3) mean protein was highest during spring, when high-energy plant foods were scarce, however it was also higher than optimal during summer and fall. Contrary to our prediction: 4) allopatric black bears did not exhibit food selection for high-energy foods similar to grizzly bears. Although optimal gain of body mass was typically constrained, bears usually opted for the energetically superior trade-off of consuming high-energy, high-protein foods. Given protein digestion efficiency similar to obligate carnivores, this choice likely supported mass gain, consistent with studies showing monthly increases in percent body fat among bears in this

Stepping-Motion Motor-Control Subsystem For Testing Bearings

Science.gov (United States)

Powers, Charles E.

1992-01-01

Control subsystem closed-loop angular-position-control system causing motor and bearing under test to undergo any of variety of continuous or stepping motions. Also used to test bearing-and-motor assemblies, motors, angular-position sensors including rotating shafts, and like. Monitoring subsystem gathers data used to evaluate performance of bearing or other article under test. Monitoring subsystem described in article, "Monitoring Subsystem For Testing Bearings" (GSC-13432).

Noise reduction of rotating machinery by viscoelastic bearing supports

NARCIS (Netherlands)

Tillema, H.G.

2003-01-01

The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement

Polar bear attacks on humans: Implications of a changing climate

Science.gov (United States)

Wilder, James; Vongraven, Dag; Atwood, Todd C.; Hansen, Bob; Jessen, Amalie; Kochnev, Anatoly A.; York, Geoff; Vallender, Rachel; Hedman, Daryll; Gibbons, Melissa

2017-01-01

Understanding causes of polar bear (Ursus maritimus) attacks on humans is critical to ensuring both human safety and polar bear conservation. Although considerable attention has been focused on understanding black (U. americanus) and grizzly (U. arctos) bear conflicts with humans, there have been few attempts to systematically collect, analyze, and interpret available information on human-polar bear conflicts across their range. To help fill this knowledge gap, a database was developed (Polar Bear-Human Information Management System [PBHIMS]) to facilitate the range-wide collection and analysis of human-polar bear conflict data. We populated the PBHIMS with data collected throughout the polar bear range, analyzed polar bear attacks on people, and found that reported attacks have been extremely rare. From 1870–2014, we documented 73 attacks by wild polar bears, distributed among the 5 polar bear Range States (Canada, Greenland, Norway, Russia, and United States), which resulted in 20 human fatalities and 63 human injuries. We found that nutritionally stressed adult male polar bears were the most likely to pose threats to human safety. Attacks by adult females were rare, and most were attributed to defense of cubs. We judged that bears acted as a predator in most attacks, and that nearly all attacks involved ≤2 people. Increased concern for both human and bear safety is warranted in light of predictions of increased numbers of nutritionally stressed bears spending longer amounts of time on land near people because of the loss of their sea ice habitat. Improved conflict investigation is needed to collect accurate and relevant data and communicate accurate bear safety messages and mitigation strategies to the public. With better information, people can take proactive measures in polar bear habitat to ensure their safety and prevent conflicts with polar bears. This work represents an important first step towards improving our understanding of factors influencing

Nuclear fuel handling grapple carriage with self-lubricating bearing

International Nuclear Information System (INIS)

Wade, E.E.

1978-01-01

Disclosed is a nuclear fuel handling grapple carriage having a bearing with a lubricant reservoir that is capable of being refilled when the bearing and reservoir are submerged in a lubricant pool. The lubricant reservoir supplies lubricant to the bearing while the bearing allows a small amount of lubricant to leak passed appropriately placed seals creating a positive out flow of lubricant thereby preventing foreign material from entering the bearing

Perturbations in DNA structure upon interaction with porphyrins revealed by chemical probes, DNA footprinting and molecular modelling.

Science.gov (United States)

Ford, K G; Neidle, S

1995-06-01

The interactions of several porphyrins with a 74 base-pair DNA sequence have been examined by footprinting and chemical protection methods. Tetra-(4-N-methyl-(pyridyl)) porphyrin (TMPy), two of its metal complexes and tetra-(4-trimethylanilinium) porphyrin (TMAP) bind to closely similar AT-rich sequences. The three TMPy ligands produce modest changes in DNA structure and base accessibility on binding, in contrast to the large-scale conformational changes observed with TMAP. Molecular modelling studies have been performed on TMPy and TMAP bound in the AT-rich minor groove of an oligonucleotide. These have shown that significant structural change is needed to accommodate the bulky trimethyl substituent groups of TMAP, in contrast to the facile minor groove fit of TMPy.

Bearing load distribution studies in a multi bearing rotor system and a remote computing method based on the internet

International Nuclear Information System (INIS)

Yang, Zhao Jian; Peng, Ze Jun; Kim, Seock Sam

2004-01-01

A model in the form of a Bearing Load Distribution (BLD) matrix in the Multi Bearing Rotor System (MBRS) is established by a transfer matrix equation with the consideration of a bearing load, elevation and uniform load distribution. The concept of Bearing Load Sensitivity (BLS) is proposed and matrices for load and elevation sensitivity are obtained. In order to share MBRS design resources on the internet with remote customers, the basic principle of Remote Computing (RC) based on the internet is introduced ; the RC of the BLD and BLS is achieved by Microsoft Active Server Pages (ASP) technology

Energetic Materials - Technology, Manufacturing and Processing, 27th International Annual Conference of ICT June 25 - June 28, 1996 Karisruhe, Federal Republic of Germany.

Science.gov (United States)

1997-02-01

o x d Siron oxyde S... . .i. . . .. .. ... i .......... ......... ........... .... ...... .............. ........ Butacene...respectively) without liberation of acids which would occur with conventional substrates (amines or alcohols ). These nitrodesilylation reactions...which share the common feature that the silicon atom bears only one 0-substituent, were prepared from the corresponding alcohols by literature methods

Immobilization of Wyoming bears using carfentanil and xylazine.

Science.gov (United States)

Kreeger, Terry J; Bjornlie, Dan; Thompson, Dan; Clapp, Justin; Clark, Colby; Hansen, Cole; Huizenga, Matt; Lockwood, Sam

2013-07-01

Seven grizzly (Ursus arctos; four male, three female) and three black (Ursus americanus; two male, one female) bears caught in culvert traps or leg snares were immobilized in northwestern Wyoming with carfentanil and xylazine at doses, respectively, of 0.011 ± 0.001 and 0.12 ± 0.01 mg/kg for grizzly bears and 0.014 ± 0.002 and 0.15 ± 0.04 mg/kg for black bears. These drugs were antagonized with 1 mg/kg naltrexone and 2 mg/kg tolazoline. Induction and recovery times, respectively, were 4.3 ± 0.5 and 7.1 ± 0.8 min for grizzly bears and 5.2 ± 0.4 and 9.1 ± 2.2 min for black bears. Inductions were smooth and uneventful. Recoveries were characterized initially by increased respiration followed by raising of the head, which quickly led to a full recovery, with the bears recognizing and avoiding humans and moving away, maneuvering around obstacles. All bears experienced respiratory depression, which did not significantly improve with supplemental oxygen on the basis of pulse oximetry (P=0.56). Rectal temperatures were normothermic. Carfentanil-xylazine immobilization of bears provided significant advantages over other drug regimens, including small drug volumes, predictable inductions, quick and complete recoveries, and lower costs. On the basis of these data, both grizzly and black bears can be immobilized effectively with 0.01 mg/kg carfentanil and 0.1 mg/kg xylazine.

Targeting Faulty Bearings for an Ocean Turbine Dynamometer

Directory of Open Access Journals (Sweden)

David J. Vendittis

2013-01-01

Full Text Available A real-time, vibrations-based condition monitoring method used to detect, localize, and identify a faulty bearing in an ocean turbine electric motor is presented in this paper. The electric motor is installed in a dynamometer emulating the functions of the actual ocean turbine. High frequency modal analysis and power trending are combined to assess the operational health of the dynamometer’s bearings across an array of accelerometers. Once a defect has been detected, envelope analysis is used to identify the exact bearing containing the defect. After a brief background on bearing fault detection, this paper introduces a simplified mathematical model of the bearing fault, followed with the signal processing approach used to detect, locate, and identify the fault. In the results section, effectiveness of the methods of bearing fault detection presented in this paper is demonstrated through processing data collected, first, from a controlled lathe setup and, second, from the dynamometer. By mounting a bearing containing a defect punched into its inner raceway to a lathe and placing an array of accelerometers along the length of lathe, the bearing fault is clearly detected, localized, and identified as an inner raceway defect. Through retroactively trending the data leading to the near-failure of one of the electric motors in the dynamometer, the authors identified a positive trend in energy levels for a specific frequency band present across the array of accelerometers and identify two bearings as possible sources of the fault.

Hydrostatic radial bearing of centrifugal pump

International Nuclear Information System (INIS)

Skalicky, A.

1976-01-01

A hydrostatic radial pump is described characterized by the fact that part of the medium off-taken from delivery is used as a lubricating medium. Two additional bodies are placed alongside a hydrostatic bearing with coils in between them and the pump shaft; the coils have an opposite pitch. The feed channel for the hydrostatic bearing pocket is linked to delivery. The coil outlets are connected to the pump suction unit. Two rotating coils placed alongside the hydrostatic bearing will considerably simplify the communication channel design and reduce the dependence on the pump shaft deflections. The addition of another rotating coil in the close vicinity of the pump shaft or directly on the shaft further increases the efficiency. The bearing can be used in designing vertical circulating pumps for the cooling circuits of nuclear reactors. (J.B.)

Simulating fullerene ball bearings of ultra-low friction

International Nuclear Information System (INIS)

Li Xiaoyan; Yang Wei

2007-01-01

We report the direct molecular dynamics simulations for molecular ball bearings composed of fullerene molecules (C 60 and C 20 ) and multi-walled carbon nanotubes. The comparison of friction levels indicates that fullerene ball bearings have extremely low friction (with minimal frictional forces of 5.283 x 10 -7 and 6.768 x 10 -7 nN/atom for C 60 and C 20 bearings) and energy dissipation (lowest dissipation per cycle of 0.013 and 0.016 meV/atom for C 60 and C 20 bearings). A single fullerene inside the ball bearings exhibits various motion statuses of mixed translation and rotation. The influences of the shaft's distortion on the long-ranged potential energy and normal force are discussed. The phonic dissipation mechanism leads to a non-monotonic function between the friction and the load rate for the molecular bearings

Development of AE monitoring system for journal bearing

International Nuclear Information System (INIS)

Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa

1994-01-01

For the purpose of monitoring of the bearing conditions in rotating machinery, a system for journal bearing diagnosis by AE was developed. Acoustic emission technique is used to detect abnormal conditions in the bearing system. And various data such as AE events, rms voltage level of AE signals, and AE parameters were acquired during experiments with the simulated journal bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was accomplished. Bearing diagnosis system is composed of four parts as follows : sensing part for AE sensor and preamplifier, signal processing part for rms-to-dc converting to measure AE rms voltage, interface part for connecting rms signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

Fault tolerant homopolar magnetic bearings with flux invariant control

International Nuclear Information System (INIS)

Na, Uhn Joo

2006-01-01

The theory for a novel fault-tolerant 4-active-pole homopolar magnetic bearing is developed. If any one coil of the four coils in the bearing actuator fail, the remaining three coil currents change via an optimal distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. The homopolar magnetic bearing thus provides unaltered magnetic forces without any loss of the bearing load capacity even if any one coil suddenly fails. Numerical examples are provided to illustrate the novel fault-tolerant, 4-active pole homopolar magnetic bearings

Novel Role of Carbon Dioxide as a Selective Agent in Palladium-Catalyzed Cyclotrimerization of Alkynes

Institute of Scientific and Technical Information of China (English)

李金恒; 谢叶香

2004-01-01

Carbon dioxide was found as a selective agent to promote the palladium-catalyzed cyclotrimerization of alkynes in water. Both aryl and alkylacetylenes afforded the corresponding cyclotrimerization products regioselectively in high yields using PdCl2, CuCl2, and CO2 as the catalytic system. However, tert-butylacetylene bearing a bulky group gave a dimerization product. Mechanism of this reaction was also discussed.

Active Vibration Control of Hydrodynamic Journal Bearings

Science.gov (United States)

Tůma, J.; Šimek, J.; Škuta, J.; Los, J.; Zavadil, J.

Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. It is assumed that the journal vibration is measured by a pair of proximity probes. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. The active vibration control was tested with the use of a test rig, which consists of a rotor supported by two controllable journal bearings and driven by an inductive motor up to 23,000 rpm. As it was proved by experiments the active vibration control extends considerably the range of the rotor operational speed.

Sudden venting test of an emergency bearing for the magnet bearing type compound molecular pump

International Nuclear Information System (INIS)

Hiroki, Seiji; Abe, Tetsuya; Murakami, Yoshio; Okamoto, Masatomo; Iguchi, Masashi; Nakamura, Jyunichi; Nakazeki, Tsugito.

1995-01-01

The vacuum evacuation system for nuclear fusion reactors bears the role of exhausting hydrogen isotopes in large quantity together with helium continuously for long hours, and as the high vacuum pumps for this purpose, the mechanical pumps which can do continuous evacuation and decrease the quantity of staying radioactive tritium, such as turbo molecular pumps and compound molecular pumps, are promising. Because of the compatibility with tritium, oil lubrication is not desirable, accordingly, the pumps with ceramic rotating vanes and magnetic bearings are demanded. As a part of the development of a magnetic bearing type mechanical pump which can be used for nuclear fusion reactors, the compound molecular pump, in which emergency bearings were incorporated, was made for trial, and the test of sudden air intrusion was carried out, as the results, various knowledges were obtained. The constitution of the testing setup, and the test results are reported. When air was injected at the pressure rise of 3.3x10 4 Pa/s from exhaust port side, after about 2.5 s, the maximum lift of 4.2x10 3 N arose. When air was injected at the pressure rise of 2.7x10 5 Pa/s from the suction part side, after about 0.4s, the maximum lift of 6.9x10 3 N arose. In the air injection alternately from the suction port and exhaust port sides, the emergency bearings functioned normally in 10 times of the test. (K.I.)

Wear-resistant ball bearings for space applications

Science.gov (United States)

Boving, H.; Hintermann, H. E.; Hanni, W.; Bondivenne, E.; Boeto, M.; Conde, E.

1977-01-01

Ball bearings consisting of steel parts of which the rings are coated with hard, wear resistant, chemical vapor deposited TiC are described. Experiments conducted in ultrahigh vacuum, using cages of various materials with self-lubricating properties, show that such bearings are suitable for space applications. The results of laboratory tests on the ESA Meteosat Radiometer Focalizing mechanism, which contains six coated bearings, are summarized.

Bulky DNA Adducts in Cord Blood, Maternal Fruit-and-Vegetable Consumption, and Birth Weight in a European Mother-Child Study (NewGeneris)

DEFF Research Database (Denmark)

Pedersen, Marie; Schoket, Bernadette; Godschalk, Roger W

2013-01-01

, Greece, Norway, and Spain were recruited in 2006-2010. Adduct levels were measured by the 32P-postlabeling technique in white blood cells from 229 mothers and 612 newborns. Maternal diet was examined through questionnaires.Results: Adduct levels in maternal and cord blood samples were similar...... versus lowest tertile of adducts. The negative association with birth weight was limited to births in Norway, Denmark, and England, the countries with the lowest adduct levels, and was more pronounced in births to mothers with low intake of fruits and vegetables (-248 g; 95% CI: -405, -92 g) compared......, Kleinjans JC, Segerbäck D, Kogevinas M. 2013. Bulky DNA adducts in cord blood, maternal fruit-and-vegetable consumption, and birth weight in a European mother-child study (NewGeneris). Environ Health Perspect 121:1200-1206; http://dx.doi.org/10.1289/ehp.1206333....

Foot-and-mouth disease in Asiatic black bears (Ursus thibetanus).

Science.gov (United States)

Officer, Kirsty; Lan, Nguyen Thi; Wicker, Leanne; Hoa, Nguyen Thi; Weegenaar, Annemarie; Robinson, Jill; Ryoji, Yamaguchi; Loukopoulos, Panayiotis

2014-09-01

Foot-and-mouth disease (FMD) is a highly contagious, debilitating, and globally significant viral disease typically affecting cloven-hoofed hosts. The diagnosis of FMD in bears in Vietnam is described. The current study describes a confirmed case of FMD in a bear species, and the clinical signs compatible with FMD in a Malayan sun bear. Thirteen Asiatic black bears (Ursus thibetanus) and 1 Malayan sun bear (Helarctos malayanus) were apparently affected. In August 2011, an adult bear became lethargic, and developed footpad vesicles. Over 15 days, 14 out of 17 bears developed similar signs; the remaining 3 co-housed bears and another 57 resident bears did not. All affected bears developed vesicles on all footpads, and most were lethargic for 24-48 hr. Nasal and oral lesions were noted in 6 and 3 cases, respectively. Within 1 month, all looked normal. Foot-and-mouth disease virus (FMDV) was detected by reverse transcription polymerase chain reaction, classified as serotype O, and isolated by virus isolation techniques. Phylogenetic analysis demonstrated clustering of 3 bear isolates, in a branch distinct from other FMDV type O isolates. The outbreak likely occurred due to indirect contact with livestock, and was facilitated by the high density of captive bears. It showed that Asiatic black bears are capable of contracting FMDV and developing clinical disease, and that the virus spreads easily between bears in close contact. © 2014 The Author(s).