WorldWideScience

Sample records for based inovation systems

  1. BACE0.85Y0.15O3-DELTA Based Materials for Inovative Monolithic Solid Oxide Fuel Cells

    Science.gov (United States)

    Krezhov, Kiril; Vladikova, Daria

    2016-07-01

    Solid oxide fuel cells (SOFCs) offer a promising green technology of direct conversion of chemical energy of fuel into electricity. Among the families of metal oxides, which can be successfully used as electrodes (cathodes or anodes) in SOFC, certain members of the large family of transition-metal oxides with perovskite structure ABO _{3} were found very prospective to fulfil most of the features required for preparation of mixed ionic-electronic conductor (MIEC) oxide materials for SOFCs operated in the intermediate temperature range. In this regard Barium cerate with Y-substitution at the B-site (Ce site) is well known for excellent conduction capabilities in the temperature range 400-800 °C as a result from the proton motion in the crystal lattice. Doping with Y ^{3+} is very effective and the proton conductivity in BaCe _{1-x}Y _{x}O _{3-δ} increases with the increasing of the dopant concentration up to x =0.2. However, the phase behaviour of the composition BCY20 (x=0.20) is very complicated. Even at room temperature the crystalline structure remains contradictory because various structures of monoclinic, rhombohedral and orthorhombic symmetry are reported. The characterization of the chemical composition and stability, oxygen stoichiometry and cationic ratios of each synthesized phase is of great importance to understand the defect-chemistry that would govern the transport properties. We report on oxygen-deficient BaCe _{0.85}Y _{0.15}O _{3-δ} (BCY15) perovskites prepared by auto-combustion with following calcination at high temperature. The structural details of powder, dense and porous samples of materials based on BCY15 were investigated from full profile analysis of neutron and x-ray diffraction patterns. The materials were used recently as cathode, anode and central membrane in an innovative monolithic design of SOFC.

  2. Implications of the Subject's Ontological Statute in the Bakhtin, Medvedev, Vološinov Circle's Discursive Theory

    Directory of Open Access Journals (Sweden)

    Vera Lúcia Pires

    2013-06-01

    Full Text Available This paper aims to explore the dialogical ontology from a Bakhtinian perspective for this is an essential topic linked to subjects’ agency in the context of dialogism. From this acting definition emerges a conception of language that is the basis of the Bakhtin, Medvedev, VoloŠinov Circle’s theory of enunciation. Thus, one intends to examine here the implications of the statute of the subject in Bakhtin’s philosophical theory and its resulting application in the Circle’s enunciative theory, which makes necessary to explore the philosophical bases of the Bakhtinian architecture as regards the dialogical principle, the conceptions of identity and intersubjectivity, social evaluation, the ethics of responsibility and the relationship among subjects. One aims to show that sense, resulting from enunciation, has to do with the ontological statute, understood as a social and historical one, of interacting subjects.

  3. 治理语境下公共体育服务制度创新的价值导向与路径选择%Value Orientation and Path Selection in the Inovation of Public Sport Service Systems in the Context of Governance

    Institute of Scientific and Technical Information of China (English)

    戴健; 张盛; 唐炎; 郭修金; 马志和

    2015-01-01

    This paper ,which addressed the status quo of China’s public sport institutional sup‐ply through literature review and policy‐analysis ,found out that there exist the following pre‐dicaments in the current administration :the lack of top‐level design ,the deflection in demand orientation ,and the weakness in multivariate cooperation .The study revealed that there is an i‐somorphic relationship between the institutional construction of public sport service and the transformation in the pattern of national governance ,which is mainly represented in the govern‐ment’s use of a new fashion in dealing with the relationship between sports and the develop‐ment of the economy and society as well as in tackling the structural problems regarding justice and efficiency within the sport systems in its pursuit of maximizing public interests and amelio‐rating sport administration .For this purpose ,the institutional renovation in public sport service ought to set its value orientation in terms of both conception and practice while following the principle of suiting tasks to patterns in combining and restructuring the accessible sport‐gov‐ernance resources concerning government ,market and society so as to accelerate institutional renovation in government ,engage market and sport social organizations in the public sport service supply and establish a governance mechanism via multivariate cooperation .%利用文献资料调研和政策分析法等研究方法分析了我国公共体育服务制度供给的现状,并指出其存在顶层设计欠缺、需求导向偏离以及多元协同乏力等治理困境。研究发现,我国公共体育服务的制度建构与国家治理方式的变革有着一定同构关系,其突出表现是政府在追求公共利益最大化和改善体育治理绩效的过程中,以新的治理范式处理体育系统与经济社会发展之间的关系,解决体育系统内部公平与效率等结构性问题。为此

  4. Ekonomika inovácie ako súčasť zvyšovania výkonnosti firmy

    Directory of Open Access Journals (Sweden)

    Chromjaková Felicita

    2009-12-01

    Full Text Available Základom dobre nastavenej inovácie je jej správna ekonomika, teda znalosť prietoku hodnoty, participujúcej v rôznych etapách na tvorbe inovácií a komplexnom inovačnom procese firmy. Prietok hodnoty má zásadný význam pre ekonomiku inovácie v tom, že na základe optimálne definovaných inovačných metrík dokáže identifikovať reálne ekonomické vstupy a výstupy a priamo poukázať na inovačný potenciál firmy a jeho úspešnosť z hľadiska zvyšovania budúcej výkonnosti firmy.The basis of a well balanced innovation is its right economy, that is so the knowledge of the value throughput, participating in the various phases of creating the innovation and of a complex innovation process of the company. Value throughput has an essential importance for the innovation economy there, where on the basis of optimally defined innovation metrics can be identified real economical inputs and outputs and directly the innovation potential of the ompany and its success from the point of view of the increase of its future efficiency.

  5. THE STIMULATION OF INOVATION IN THE ROMANIAN ENTERPRISES ON THE COORDINATES OF SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    PAUL - BOGDAN ZAMFIR

    2015-07-01

    Full Text Available In the contemporary context of sustainable development the relation innovation - technological progress in the production process of Romanian enterprises is an understood necessity. Thus, the enterprises from our country must be placed on the coordinates of sustainable development being focused on a multidimensional approach which is materialized in: innovation, research and technological transfer. On this background we consider that the implementation of innovative solutions in the entrepreneurial activity can decisively contribute to the international competitiveness of Romanian SMEs. In the based economy based on knowledge the successful companies use intensively in their current activity of innovative solutions that enhance in the subastanţial manner the revenues by the market launch of high quality products and services

  6. Mite Pests in Plant Crops – Current Issues, Inovative Approaches and Possibilities for Controlling Them (1

    Directory of Open Access Journals (Sweden)

    Radmila Petanović

    2010-01-01

    Full Text Available In the middle of the last century, mites moved into the focus of attention as pests relevantto agriculture, forestry and landscape horticulture, presumably in direct reactionto the “green revolution” that involved plant cultivation in large-plot monocropping systems,improved methods of cultivation, selection of high-yielding cultivars and intensifieduse of pesticides and mineral fertilizers. Agroecosystems in which phytophagous miteshave become harmful organisms are primarily orchards, vineyards, greenhouses, urbangreeneries, plant nurseries and stored plant products, as well as annual field crops to asomewhat lesser degree. Phytophagous mite species belong to a variety of spider mites(Tetranychidae, false spider mites (Tenuipalpidae, gall and rust mites (Eriophyoidae, tarsonemidmites (Tarsonemidae and acarid mites (Acaridae. Most of these harmful speciesare widespread, some of them having more economic impact than others and being moredetrimental as depending on various specificities of each outdoor agroecosystem in anyparticular climatic region.The first segment of this overview focuses on the most significant mite pests ofagroecosystemsand urban horticultural areas in European countries, our own region andin Serbia today, primarily on species that have caused problems in recent years regardingplant production, and it also discusses various molecular methods available for investigatingdifferent aspects of the biology of phytophagous mites. Also, acaricides are discussedas a method of controlling mite pests in the light of the current situation and trends on pesticidemarkets in Serbia and the European Union member-countries

  7. Proprietatea Industrială - incitant al creaţiei ştiinţifice şi inovării

    OpenAIRE

    Anghel, Ion E.; Iancu, Victor

    2009-01-01

    În epoca modernă, în care progresul se realizează prin cunoaştere şi se produce/se utilizează cu predilecţie cunoaştere, drepturile de proprietate industrială, protecţia acestora şi instituţiile specializate din domeniu îşi au un important rol dinamizator. Ca urmare, studiul de faţă prezintă mai întâi cerinţele stimulării creaţiei ştiinţifice, tehnologice şi inovării în cadrul spaţiului european al cercetării, în interdependenţă cu drepturile de proprietate industrială. În acest context se ev...

  8. EDUCATIONAL INOVATION AND CONSUMER BEHAVIOUR. A STUDY OF STUDENTS PERCEPTIONS ON THE USE OF E-LEARNING IN CLASS.

    OpenAIRE

    Tufan Adriana; Avram Emanuela; Eftimie Raluca Cristina

    2011-01-01

    In European and international context of a knowledge-based society, education becomes a strategic element of sustainable economic growth. Developing human capital and adapt its training to the present requirements of the labor market requires major investments both in the formal education system and in individual study. In his position as a promoter of change, the educational environment must actively respond to external challenges, demonstrating a strong flexibility and openness to new. Impl...

  9. EDUCATIONAL INOVATION AND CONSUMER BEHAVIOUR. A STUDY OF STUDENTS PERCEPTIONS ON THE USE OF E-LEARNING IN CLASS.

    Directory of Open Access Journals (Sweden)

    Tufan Adriana

    2011-07-01

    Full Text Available In European and international context of a knowledge-based society, education becomes a strategic element of sustainable economic growth. Developing human capital and adapt its training to the present requirements of the labor market requires major investments both in the formal education system and in individual study. In his position as a promoter of change, the educational environment must actively respond to external challenges, demonstrating a strong flexibility and openness to new. Implementing the concepts and marketing strategies in the educational environment have gradually led to the development of educational services and improvement of their quality. Focusing on student, the mainstream of marketing, brings in front his requirements and expectations, and the development of the educational strategies aim to satisfy his information and intellectual development needs. School success is reflected in its students achievement as a successful commercial product is observed by analyzing sales figures recorded. Frequent changes occurring in society as a result of accelerated evolution of technique and technology have made their mark on education. The assimilation of innovations in the traditional educational processes imposed and behavioral changes and adaptations to all education stakeholders. Thus knowing the consumer behavior, the influencing factors and the psychological processes decision making, becomes essential in creating an effective education system. The emergence of e-learning platforms as a result of the growing importance of lifelong learning and integrating them in the traditional educational environment was a crucial moment in the evolution of educational practices. Focusing on computer, Internet and intranets, e-learning brings education a surplus of interactivity, interaction, responsibility and collaborative learning. Considered as innovative solutions, initially, complementary to the classical teaching techniques, e

  10. Produktová inovácia v oblasti mobilných aplikácií

    OpenAIRE

    Michaličová, Alexandra

    2015-01-01

    Aim of this master thesis is to determine whether the introduction of new functionality into mobile application based on existing competitive trends, can grant selected application a new position on the market. To evaluate the hypothesis we used data collection and feedback from users. Thesis shows introduces various aspects associated with product management in practice. The theoretical part defines the product management and mobile applications as products, product innovation and describes ...

  11. KNOWLEDGE MANAGEMENT AND INTELLECTUAL CAPITAL MANAGEMENT COUPLED TO QUALITY MANAGEMENT SYSTEM LEAD TO BUSINESS SUCCESS

    Directory of Open Access Journals (Sweden)

    Stevan Živojinović

    2009-03-01

    Full Text Available From the vantage point of contemporary management paradigm shift and new knowledge-based economy, we underscore the importance of relations and support of quality management system - QMS (according to ISO 9001 standard for management of knowledge and intellectual capital. QMS implementation, documenting, application, maintenance and continuous improvement, as a catalyst of effective organization management, provides a foundation for effective knowledge management and intellectual capital enlargement, via knowledge, skills, management systems, procedures, information and product flow, culture, inovation, relations with customers and other stakeholders. Simultaneous implementation and dynamic interaction of these advanced management concepts intended to attain competitive advantage can result in synergic effects and improved performance. From the perspective of knowledge, as a central unifying notion, organizational behavior based on learning influences long-term business success, process effectiveness and customer satisfaction.

  12. Participatory Inovation Conference 2011 Proceedings

    DEFF Research Database (Denmark)

    Buur, Jacob

    2011-01-01

    Industry and public agencies increasingly adopt user-driven innovation and open innovation, as they realise that innovation cannot come solely from within an organisation. Innovation happens in the ‘breaking of the waves’ between people outside and people inside – because they have different stak...

  13. Hydrogel based occlusion systems

    NARCIS (Netherlands)

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A.; Mendes, E.; Neves, H.P.; Herijgers, P.; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V.

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a tar

  14. Hydrogel based occlusion systems

    OpenAIRE

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A; Mendes, E.; Neves, H.P.; Herijgers, P; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a target occlusion location. The hydrogel is configured to permanently occlude the target occlusion location in the swollen state. The hydrogel may be an electro-activated hydrogel (EAH) which could be ...

  15. Studying Sensing-Based Systems

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun

    2013-01-01

    Recent sensing-based systems involve a multitude of users, devices, and places. These types of systems challenge existing approaches for conducting valid system evaluations. Here, the author discusses such evaluation challenges and revisits existing system evaluation methodologies....

  16. Inovāciju veidotāju - zinātnes un rūpniecības uzņēmumu sadarbības loma un industriālās politikas kontekstā

    OpenAIRE

    Akmene, Anna

    2013-01-01

    Darbā tiek apskatīta industriālās un inovāciju politikas loma valsts ekonomiskajā politikā,konkurētspēja,Triple Helix modeļa teorētiskais pamatojums kā arī apskatīts labās prakses piemērs - Somija,kas ir uz zināšanām balstītas ekonomikas piemērs pasaulei,teicami parādot valsts lomu pārmaiņu veikšanā un Triple Helix modeļa realizāciju attīstības politikā.Tāpat darbā tiek identificētas līdzšinējās zinātnes un rūpniecības sadarbības problēmas kā arī tiek piedāvāts risinājums Somijas politikas u...

  17. Moon base reactor system

    Science.gov (United States)

    Chavez, H.; Flores, J.; Nguyen, M.; Carsen, K.

    1989-01-01

    The objective of our reactor design is to supply a lunar-based research facility with 20 MW(e). The fundamental layout of this lunar-based system includes the reactor, power conversion devices, and a radiator. The additional aim of this reactor is a longevity of 12 to 15 years. The reactor is a liquid metal fast breeder that has a breeding ratio very close to 1.0. The geometry of the core is cylindrical. The metallic fuel rods are of beryllium oxide enriched with varying degrees of uranium, with a beryllium core reflector. The liquid metal coolant chosen was natural lithium. After the liquid metal coolant leaves the reactor, it goes directly into the power conversion devices. The power conversion devices are Stirling engines. The heated coolant acts as a hot reservoir to the device. It then enters the radiator to be cooled and reenters the Stirling engine acting as a cold reservoir. The engines' operating fluid is helium, a highly conductive gas. These Stirling engines are hermetically sealed. Although natural lithium produces a lower breeding ratio, it does have a larger temperature range than sodium. It is also corrosive to steel. This is why the container material must be carefully chosen. One option is to use an expensive alloy of cerbium and zirconium. The radiator must be made of a highly conductive material whose melting point temperature is not exceeded in the reactor and whose structural strength can withstand meteor showers.

  18. Capability-based computer systems

    CERN Document Server

    Levy, Henry M

    2014-01-01

    Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

  19. Intelligence-based systems engineering

    CERN Document Server

    Tolk, Andreas

    2011-01-01

    The International Council on Systems Engineering (INCOSE) defines Systems Engineering as an interdisciplinary approach and means to enable the realization of successful systems. Researchers are using intelligence-based techniques to support the practices of systems engineering in an innovative way. This research volume includes a selection of contributions by subject experts to design better systems.

  20. Web-based support systems

    CERN Document Server

    Yao, JingTao

    2010-01-01

    The emerging interdisciplinary study of Web-based support systems focuses on the theories, technologies and tools for the design and implementation of Web-based systems that support various human activities. This book presents the state-of-the-art in Web-based support systems (WSS). The research on WSS is multidisciplinary and focuses on supporting various human activities in different domains/fields based on computer science, information technology, and Web technology. The main goal is to take the opportunities of the Web, to meet the challenges of the Web, to extend the human physical limita

  1. Expert and Knowledge Based Systems.

    Science.gov (United States)

    Demaid, Adrian; Edwards, Lyndon

    1987-01-01

    Discusses the nature and current state of knowledge-based systems and expert systems. Describes an expert system from the viewpoints of a computer programmer and an applications expert. Addresses concerns related to materials selection and forecasts future developments in the teaching of materials engineering. (ML)

  2. MTA Computer Based Evaluation System.

    Science.gov (United States)

    Brenner, Lisa P.; And Others

    The MTA PLATO-based evaluation system, which has been implemented by a consortium of schools of medical technology, is designed to be general-purpose, modular, data-driven, and interactive, and to accommodate other national and local item banks. The system provides a comprehensive interactive item-banking system in conjunction with online student…

  3. 加强励志教育创新大学校园文化建设%Reinforcing the inspirational education to inovate campus culture construction

    Institute of Scientific and Technical Information of China (English)

    王晓梅; 苗树梁; 杨立富

    2016-01-01

    Based on inspirational education, this thsis explores inspirational education in five respects,that is, reading inspirational books, telling motivational stories, watching inspirational movies, spreading motivational proverbs to bring the inspirational function into play. Inspirational education should play a role of motivation which is “educating students by advanced culture, inspiring students by advanced thoughts, impelling students by advanced atmosphere to sharpen students’ will, to cultivate their liberty, independence, strong-willed and active mind-set, to inspire their need of success and to promote their ability of serving the society.%以励志教育为突破口,通过读、讲、唱、看、传励志书、励志故事、励志歌曲、励志电影、励志箴言五项励志教育,发挥榜样激励作用,用先进的文化教育人,用先进的思想鼓舞人,用先进的气氛感召人,磨砺学生意志,培养学生自主,自立,自强和积极向上的心态,激发大学生成功的需要,提高大学生服务社会的本领。使每位学生能够立志成才,探知践行,将看不见、摸不着、不可称的励志精神、透过数字、成绩得以体现,为拓展大学校园文化建设,发挥积极作用。

  4. Solar based hydrogen production systems

    CERN Document Server

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  5. Immunity Based Worm Detection System

    Institute of Scientific and Technical Information of China (English)

    HONG Zheng; WU Li-fa; WANG Yuan-yuan

    2007-01-01

    Current worm detection methods are unable to detect multi-vector polymorphic worms effectively.Based on negative selection mechanism of the immune system,a local network worm detection system that detects worms was proposed.Normal network service requests were represented by self-strings,and the detection system used self-strings to monitor the network for anomaly.According to the properties of worm propagation,a control center correlated the anomalies detected in the form of binary trees to ensure the accuracy of worm detection.Experiments show the system to be effective in detecting the traditional as well as multi-vector polymorphic worms.

  6. SMS BASED REMOTE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    Reecha Ranjan Singh , Sangeeta Agrawal , Saurabh Kapoor ,S. Sharma

    2011-08-01

    Full Text Available A modern world contains varieties of electronic equipment and systems like: TV, security system, Hi-fi equipment, central heating systems, fire alarm systems, security alarm systems, lighting systems, SET Top Box, AC (Air Conditioner etc., we need to handle, ON/OFF or monitor these electrical devices remotely or to communicate with these but, if you are not at the home or that place and you want to communicate with these device. So the new technology for handled these devices remotely and for communication to required the GSM, mobile technology, SMS (short message service and some hardware resources. SMS based remote control for home appliances is beneficial for the human generation, because mobile is most recently used technology nowadays.

  7. NFC based parking payment system

    Directory of Open Access Journals (Sweden)

    Arun Radhakrishnan

    2015-06-01

    Full Text Available All people want to improve their quality of life and this can be achieved only by technology. Many problems are faced by daily vehicle users in payment based parking systems, both in open air parking system where the parking is done along the streets and in closed parking system where parking is done in closed infrastructure added with entry and exit points. Delays (long queues and accuracy in fares are the main problems faced by the users. Many solutions are proposed to solve this problem but all have their own drawbacks. In this paper a new solution is proposed based on Near Field Communication (NFC which makes the payment system reliable and easy.

  8. A hybrid base isolation system

    Energy Technology Data Exchange (ETDEWEB)

    Hart, G.C. [Univ. of California, Los Angeles, CA (United States); Lobo, R.F.; Srinivasan, M. [Hart Consultant Group, Santa Monica, CA (United States); Asher, J.W. [kpff Engineers, Santa Monica, CA (United States)

    1995-12-01

    This paper proposes a new analysis procedure for hybrid base isolation buildings when considering the displacement response of a base isolated building to wind loads. The system is considered hybrid because of the presence of viscous dampers in the building above the isolator level. The proposed analysis approach incorporates a detailed site specific wind study combined with a dynamic nonlinear analysis of the building response.

  9. Photoelectrochemical based direct conversion systems

    Energy Technology Data Exchange (ETDEWEB)

    Kocha, S.; Arent, D.; Peterson, M. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1995-09-01

    The goal of this research is to develop a stable, cost effective, photoelectrochemical based system that will split water upon illumination, producing hydrogen and oxygen directly, using sunlight as the only energy input. This type of direct conversion system combines a photovoltaic material and an electrolyzer into a single monolithic device. We report on our studies of two multifunction multiphoton photoelectrochemical devices, one based on the ternary semiconductor gallium indium phosphide, (GaInP{sub 2}), and the other one based on amorphous silicon carbide. We also report on our studies of the solid state surface treatment of GaInP{sub 2} as well as our continuing effort to develop synthetic techniques for the attachment of transition metal complexes to the surface of semiconductor electrodes. All our surface studies are directed at controlling the interface energetics and forming stable catalytic surfaces.

  10. Fingerprint Indoor Position System Based

    Directory of Open Access Journals (Sweden)

    José Antonio Gómez Martin

    2013-01-01

    Full Text Available This paper presents a research and a development of a fingerprint-indoor-positioning system using the Received Signal Strength Indication (RSSI of a Wireless Sensor Network (WSN. The WSN implementation is based on two different protocol stacks: BitCloud and OpenMAC, a certified ZigBee Compliant Platform (ZCP and an IEEE 802.15.4 embedded software implementation respectively, both from Atmel, and the system uses two different fingerprint algorithms, Simple and Centroid. A comparative analysis of both algorithms using both protocol stacks implementations have been performed to ascertain the best WSN protocol stack and the best algorithm for positioning purposes.

  11. Nucleic acid based logical systems.

    Science.gov (United States)

    Han, Da; Kang, Huaizhi; Zhang, Tao; Wu, Cuichen; Zhou, Cuisong; You, Mingxu; Chen, Zhuo; Zhang, Xiaobing; Tan, Weihong

    2014-05-12

    Researchers increasingly visualize a significant role for artificial biochemical logical systems in biological engineering, much like digital logic circuits in electrical engineering. Those logical systems could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expression in vivo. Nucleic acids (NA), as carriers of genetic information with well-regulated and predictable structures, are promising materials for the design and engineering of biochemical circuits. A number of logical devices based on nucleic acids (NA) have been designed to handle various processes for technological or biotechnological purposes. This article focuses on the most recent and important developments in NA-based logical devices and their evolution from in vitro, through cellular, even towards in vivo biological applications.

  12. MMS Based Car Security System

    Directory of Open Access Journals (Sweden)

    Surendra Sot

    2013-03-01

    Full Text Available In This paper “MMS Based Car Security System” is being proposed to solve the issue. It introduces the integration between monitoring and tracking system. Both elements are very crucial in order to have a powerful security system. The system can send SMS and MMS to the owner to have fast response especially if the car is nearby. This paper focuses on using MMS and SMS technology. As soon as there is intrusion detected, first the SMS is sent to master user and the picture of the intruder will be sent via local GSM/GPRS service provider to user (and / or police mail ID. The implementation and testing results show the success of prototype in sending MMS to owner within 30 seconds. The timing and results are suitable to owner and police to take suitable action against intruder. User can also control the module using command. User has to send different SMS to module while configuration of module for master. Master user can be change as per need, only master user can make changes in to the module.

  13. A Correlation-Based Fingerprint Verification System

    NARCIS (Netherlands)

    Bazen, Asker M.; Verwaaijen, Gerben T.B.; Gerez, Sabih H.; Veelenturf, Leo P.J.; Zwaag, van der Berend Jan

    2000-01-01

    In this paper, a correlation-based fingerprint verification system is presented. Unlike the traditional minutiae-based systems, this system directly uses the richer gray-scale information of the fingerprints. The correlation-based fingerprint verification system first selects appropriate templates i

  14. Covering the Bases: Exploring Alternative Systems

    Science.gov (United States)

    Kurz, Terri L.; Garcia, Jorge

    2015-01-01

    Since the 1950s, the understanding of how the base 10 system works has been encouraged through alternative base systems (Price 1995; Woodward 2004). If high school students are given opportunities to learn other base systems and analyze what they denote, we believe that they will better understand the structure of base 10 and its operations…

  15. Decision Support and Knowledge-Based Systems.

    Science.gov (United States)

    Konsynski, Benn R.; And Others

    1988-01-01

    A series of articles addresses issues concerning decision support and knowledge based systems. Topics covered include knowledge-based systems for information centers; object oriented systems; strategic information systems case studies; user perception; manipulation of certainty factors by individuals and expert systems; spreadsheet program use;…

  16. Remote Monitoring System for Communication Base Based on Short Message

    Directory of Open Access Journals (Sweden)

    Han Yu Fu

    2013-07-01

    Full Text Available This paper presents design and development of an automatic monitoring system of communication base which is an important means to realize modernization of mobile communication base station management. Firstly, this paper proposes the architecture of the monitoring system. The proposed system consists of mocrocontrollers, sensors, GSM module and MFRC500 etc. The value of parameters is measured in the system including terminal is studied and designed, including hardware design based on embedded system and software design. Finally, communication module is discussed. The monitoring system which is designed  based on GSM SMS(short message service can improve the integrity, reliability, flexibility and intellectuality of monitoring system.

  17. A web-based audiometry database system.

    Science.gov (United States)

    Yeh, Chung-Hui; Wei, Sung-Tai; Chen, Tsung-Wen; Wang, Ching-Yuang; Tsai, Ming-Hsui; Lin, Chia-Der

    2014-07-01

    To establish a real-time, web-based, customized audiometry database system, we worked in cooperation with the departments of medical records, information technology, and otorhinolaryngology at our hospital. This system includes an audiometry data entry system, retrieval and display system, patient information incorporation system, audiometry data transmission program, and audiometry data integration. Compared with commercial audiometry systems and traditional hand-drawn audiometry data, this web-based system saves time and money and is convenient for statistics research.

  18. Honeypot based Secure Network System

    Directory of Open Access Journals (Sweden)

    Yogendra Kumar Jain

    2011-02-01

    Full Text Available A honeypot is a non-production system, design to interact with cyber-attackers to collect intelligence on attack techniques and behaviors. There has been great amount of work done in the field of networkintrusion detection over the past three decades. With networks getting faster and with the increasing dependence on the Internet both at the personal and commercial level, intrusion detection becomes a challenging process. The challenge here is not only to be able to actively monitor large numbers of systems, but also to be able to react quickly to different events. Before deploying a honeypot it is advisable to have a clear idea of what the honeypot should and should not do. There should be clear understandingof the operating systems to be used and services (like a web server, ftp server etc a honeypot will run. The risks involved should be taken into consideration and methods to tackle or reduce these risks should be understood. It is also advisable to have a plan on what to do should the honeypot be compromised. In case of production honeypots, a honeypot policy addressing security issues should be documented. Any legal issues with respect to the honeypots or their functioning should also be taken into consideration. In this paper we explain the relatively new concept of “honeypot.” Honeypots are a computer specifically designed to help learn the motives, skills and techniques of the hacker community and also describes in depth the concepts of honeypots and their contribution to the field of network security. The paper then proposes and designs an intrusion detection tool based on some of the existing intrusion detection techniques and the concept of honeypots.

  19. SQUID-based measuring systems

    Indian Academy of Sciences (India)

    M P Janawadkar; R Baskaran; R Nagendran; K Gireesan; N Harishkumar; Rita Saha; L S Vaidhyanathan; J Jayapandian; Y Hariharan; T S Radhakrishnan

    2002-05-01

    A program has been developed and initiated at the Indira Gandhi Centre for Atomic Research (IGCAR) for the utilization of SQUID sensors in various application areas. DC SQUID sensors based on Nb–AlO–Nb Josephson junctions have been designed and developed inhouse along with associated flux-locked loop (FLL) electronics. A compact low field SQUID magnetometer insertible in a liquid helium storage dewar has also been developed inhouse and is in use. Efforts to build a high field SQUID magnetometer, SQUID-DAC system, are in progress. A planar gradiometric DC SQUID sensor for non-destructive evaluation (NDE) application to be used in relatively unshielded environment has been designed and developed. An easily portable NDE cryostat with a small lift-off distance, to be used in external locations has been designed and tested. The magnetic field produced by a given two-dimensional current density distribution is inverted using the Fourier transform technique.

  20. Systems Engineering for Contingency Basing

    Science.gov (United States)

    2012-11-30

    11 Figure 2 – Boardman Soft Systems Methodology ............................................................ 12...into detailed consideration of solution implementation The creation of systemigrams follow the Boardman Soft Systems Methodology (BSSM) of seven...are depicted in Figure 2 followed by a description of each step as it related to this sub-task. Figure 2 – Boardman Soft Systems Methodology Step

  1. Area Logistics System Based on System Dynamics Model

    Institute of Scientific and Technical Information of China (English)

    GUI Shouping; ZHU Qiang; LU Lifang

    2005-01-01

    At present, there are few effective ways to analyze area logistics systems. This paper uses system dynamics to analyze the area logistics system and establishes a system dynamics model for the area logistics system based on the characteristics of the area logistics system and system dynamics. Numerical simulations with the system dynamic model were used to analyze a logistic system. Analysis of the Guangzhou economy shows that the model can reflect the actual state of the system objectively and can be used to make policy and harmonize environment.

  2. Microprocessor based systems for the higher technician

    CERN Document Server

    Vears, RE

    2013-01-01

    Microprocessor Based Systems for the Higher Technician provides coverage of the BTEC level 4 unit in Microprocessor Based Systems (syllabus U80/674). This book is composed of 10 chapters and concentrates on the development of 8-bit microcontrollers specifically constructed around the Z80 microprocessor. The design cycle for the development of such a microprocessor based system and the use of a disk-based development system (MDS) as an aid to design are both described in detail. The book deals with the Control Program Monitor (CP/M) operating system and gives background information on file hand

  3. Expert system for web based collaborative CAE

    Science.gov (United States)

    Hou, Liang; Lin, Zusheng

    2006-11-01

    An expert system for web based collaborative CAE was developed based on knowledge engineering, relational database and commercial FEA (Finite element analysis) software. The architecture of the system was illustrated. In this system, the experts' experiences, theories and typical examples and other related knowledge, which will be used in the stage of pre-process in FEA, were categorized into analysis process and object knowledge. Then, the integrated knowledge model based on object-oriented method and rule based method was described. The integrated reasoning process based on CBR (case based reasoning) and rule based reasoning was presented. Finally, the analysis process of this expert system in web based CAE application was illustrated, and an analysis example of a machine tool's column was illustrated to prove the validity of the system.

  4. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...... problems are described. Numerical tests indicate that a sequential technique called the bounds iteration method (BIM) is particularly fast and stable....

  5. Extensions in model-based system analysis

    OpenAIRE

    Graham, Matthew R.

    2007-01-01

    Model-based system analysis techniques provide a means for determining desired system performance prior to actual implementation. In addition to specifying desired performance, model-based analysis techniques require mathematical descriptions that characterize relevant behavior of the system. The developments of this dissertation give ex. tended formulations for control- relevant model estimation as well as model-based analysis conditions for performance requirements specified as frequency do...

  6. Fiber-Based Ultraviolet Laser System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The purpose of this program is to develop a compact and efficient ultraviolet laser system for use in space-based uv-Raman instruments. The basis for this system...

  7. Laser-based agriculture system

    KAUST Repository

    Ooi, Boon S.

    2016-03-31

    A system and method are provided for indoor agriculture using at least one growth chamber illuminated by laser light. In an example embodiment of the agriculture system, a growth chamber is provided having one or more walls defining an interior portion of the growth chamber. The agriculture system may include a removable tray disposed within the interior portion of the growth chamber. The agriculture system also includes a light source, which may be disposed outside the growth chamber. The one or more walls may include at least one aperture. The light source is configured to illuminate at least a part of the interior portion of the growth chamber. In embodiments in which the light source is disposed outside the growth chamber, the light source is configured to transmit the laser light to the interior portion of the growth chamber via the at least one aperture.

  8. Smartphones Based Mobile Mapping Systems

    Science.gov (United States)

    Al-Hamad, A.; El-Sheimy, N.

    2014-06-01

    The past 20 years have witnessed an explosive growth in the demand for geo-spatial data. This demand has numerous sources and takes many forms; however, the net effect is an ever-increasing thirst for data that is more accurate, has higher density, is produced more rapidly, and is acquired less expensively. For mapping and Geographic Information Systems (GIS) projects, this has been achieved through the major development of Mobile Mapping Systems (MMS). MMS integrate various navigation and remote sensing technologies which allow mapping from moving platforms (e.g. cars, airplanes, boats, etc.) to obtain the 3D coordinates of the points of interest. Such systems obtain accuracies that are suitable for all but the most demanding mapping and engineering applications. However, this accuracy doesn't come cheaply. As a consequence of the platform and navigation and mapping technologies used, even an "inexpensive" system costs well over 200 000 USD. Today's mobile phones are getting ever more sophisticated. Phone makers are determined to reduce the gap between computers and mobile phones. Smartphones, in addition to becoming status symbols, are increasingly being equipped with extended Global Positioning System (GPS) capabilities, Micro Electro Mechanical System (MEMS) inertial sensors, extremely powerful computing power and very high resolution cameras. Using all of these components, smartphones have the potential to replace the traditional land MMS and portable GPS/GIS equipment. This paper introduces an innovative application of smartphones as a very low cost portable MMS for mapping and GIS applications.

  9. SPIRE Data-Base Management System

    Science.gov (United States)

    Fuechsel, C. F.

    1984-01-01

    Spacelab Payload Integration and Rocket Experiment (SPIRE) data-base management system (DBMS) based on relational model of data bases. Data bases typically used for engineering and mission analysis tasks and, unlike most commercially available systems, allow data items and data structures stored in forms suitable for direct analytical computation. SPIRE DBMS designed to support data requests from interactive users as well as applications programs.

  10. Consent Based Verification System (CBSV)

    Data.gov (United States)

    Social Security Administration — CBSV is a fee-based service offered by SSA's Business Services Online (BSO). It is used by private companies to verify the SSNs of their customers and clients that...

  11. Response Based Emergency Control System for Power System Transient Stability

    Directory of Open Access Journals (Sweden)

    Huaiyuan Wang

    2015-11-01

    Full Text Available A transient stability control system for the electric power system composed of a prediction method and a control method is proposed based on trajectory information. This system, which is independent of system parameters and models, can detect the transient stability of the electric power system quickly and provide the control law when the system is unstable. Firstly, system instability is detected by the characteristic concave or convex shape of the trajectory. Secondly, the control method is proposed based on the analysis of the slope of the state plane trajectory when the power system is unstable. Two control objectives are provided according to the methods of acquiring the far end point: one is the minimal cost to restore the system to a stable state; the other one is the minimal cost to limit the maximum swing angle. The simulation indicates that the mentioned transient stability control system is efficient.

  12. Reflectable bases for affine reflection systems

    CERN Document Server

    Azam, Saeid; Yousofzadeh, Malihe

    2011-01-01

    The notion of a "root base" together with its geometry plays a crucial role in the theory of finite and affine Lie theory. However, it is known that such a notion does not exist for the recent generalizations of finite and affine root systems such as extended affine root systems and affine reflection systems. As an alternative, we introduce the notion of a "reflectable base", a minimal subset $\\Pi$ of roots such that the non-isotropic part of the root system can be recovered by reflecting roots of $\\Pi$ relative to the hyperplanes determined by $\\Pi$. We give a full characterization of reflectable bases for tame irreducible affine reflection systems of reduced types, excluding types $E_{6,7,8}$. As a byproduct of our results, we show that if the root system under consideration is locally finite then any reflectable base is an integral base.

  13. Troubleshooting on microprocessor based systems

    CERN Document Server

    Williams, G B

    1984-01-01

    The structure of a computing system presents unique problems when it fails to operate correctly and requires testing. This concise, yet comprehensive book describes the major test methods in current use, and their development from basic principles. Examines the sequence of tests which, built on each other, provide a suitable vehicle for testing digital systems, and the various types of testing equipment that should be applied for specific tests. An excellent introduction for those entering this increasingly complex world, the text will provide the reader with a firm basis on which to judge

  14. Component Based Electronic Voting Systems

    Science.gov (United States)

    Lundin, David

    An electronic voting system may be said to be composed of a number of components, each of which has a number of properties. One of the most attractive effects of this way of thinking is that each component may have an attached in-depth threat analysis and verification strategy. Furthermore, the need to include the full system when making changes to a component is minimised and a model at this level can be turned into a lower-level implementation model where changes can cascade to as few parts of the implementation as possible.

  15. KNOWLEDGE AND XML BASED CAPP SYSTEM

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shijie; SONG Laigang

    2006-01-01

    In order to enhance the intelligent level of system and improve the interactivity with other systems, a knowledge and XML based computer aided process planning (CAPP) system is implemented. It includes user management, bill of materials(BOM) management, knowledge based process planning, knowledge management and database maintaining sub-systems. This kind of nesting knowledge representation method the system provided can represent complicated arithmetic and logical relationship to deal with process planning tasks. With the representation and manipulation of XML based technological file, the system solves some important problems in web environment such as information interactive efficiency and refreshing of web page. The CAPP system is written in ASP VBScript, JavaScript, Visual C++ languages and Oracle database. At present, the CAPP system is running in Shenyang Machine Tools. The functions of it meet the requirements of enterprise production.

  16. Droplet microfluidics based microseparation systems.

    Science.gov (United States)

    Xiao, Zhiliang; Niu, Menglei; Zhang, Bo

    2012-06-01

    Lab on a chip (LOC) technology is a promising miniaturization approach. The feature that it significantly reduced sample consumption makes great sense in analytical and bioanalytical chemistry. Since the start of LOC technology, much attention has been focused on continuous flow microfluidic systems. At the turn of the century, droplet microfluidics, which was also termed segmented flow microfluidics, was introduced. Droplet microfluidics employs two immiscible phases to form discrete droplets, which are ideal vessels with confined volume, restricted dispersion, limited cross-contamination, and high surface area. Due to these unique features, droplet microfluidics proves to be a versatile tool in microscale sample handling. This article reviews the utility of droplet microfluidics in microanalytical systems with an emphasize on separation science, including sample encapsulation at ultra-small volume, compartmentalization of separation bands, isolation of droplet contents, and related detection techniques.

  17. SECA Coal-Based Systems

    Energy Technology Data Exchange (ETDEWEB)

    Pierre, Joseph

    2010-09-10

    This report documents the results of Cooperative Agreement DE-FC26-05NT42613 between Siemens Energy and the U.S. Department of Energy for the period October 1, 2008 through September 30, 2010. The Phase I POCD8R0 stack test was successfully completed as it operated for approximately 5,300 hrs and achieved all test objectives. The stack test article contained twenty-four 75 cm active length Delta8 scandiastabilized zirconia cells. Maximum power was approximately 10 kWe and the SOFC generator demonstrated an availability factor of 85% at 50% power or greater. The Phase II POCD8R1 stack test operated for approximately 410 hrs before being aborted due to a sudden decrease in voltage accompanied by a rapid increase in temperature. The POCD8R1 test article contained forty-eight 100 cm active length Delta8 scandiastabilized zirconia cells arranged in an array of six bundles, with each bundle containing eight cells. Cell development activities resulted in an approximate 100% improvement in cell power at 900°C. Cell manufacturing process improvements led to manufacturing yields of greater than 40% for the Delta8 cells. Delta8 cells with an active length of 100 cm were successfully manufactured as were cells with a seamless closed end. A pressurized cell test article was assembled, installed into the pressurized test facility and limited pressurized testing conducted. Open circuit voltage tests were performed at one and three atmospheres at 950°C were in agreement with the theoretical increase in the Nernst potential. Failed guard heaters precluded further testing. The SOFC analytical basis for the baseline system was validated with experimental data. Two system configurations that utilize a pressurized SOFC design with separated anode and cathode streams were analyzed. System efficiencies greater than 60% were predicted when integrating the separated anode and cathode stream module configuration with a high efficiency catalytic gasifier.

  18. SECA Coal-Based Systems

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Pierre

    2010-09-01

    This report documents the results of Cooperative Agreement DE-FC26-05NT42613 between Siemens Energy and the U.S. Department of Energy for the period October 1, 2008 through September 30, 2010. The Phase I POCD8R0 stack test was successfully completed as it operated for approximately 5,300 hrs and achieved all test objectives. The stack test article contained twenty-four 75 cm active length Delta8 scandia-stabilized zirconia cells. Maximum power was approximately 10 kWe and the SOFC generator demonstrated an availability factor of 85% at 50% power or greater. The Phase II POCD8R1 stack test operated for approximately 410 hrs before being aborted due to a sudden decrease in voltage accompanied by a rapid increase in temperature. The POCD8R1 test article contained forty-eight 100 cm active length Delta8 scandia-stabilized zirconia cells arranged in an array of six bundles, with each bundle containing eight cells. Cell development activities resulted in an approximate 100% improvement in cell power at 900°C. Cell manufacturing process improvements led to manufacturing yields of greater than 40% for the Delta8 cells. Delta8 cells with an active length of 100 cm were successfully manufactured as were cells with a seamless closed end. A pressurized cell test article was assembled, installed into the pressurized test facility and limited pressurized testing conducted. Open circuit voltage tests were performed at one and three atmospheres at 950°C were in agreement wi th the theoretical increase in the Nernst potential. Failed guard heaters precluded further testing. The SOFC analytical basis for the baseline system was validated with experimental data. Two system configurations that utilize a pressurized SOFC design with separated anode and cathode streams were analyzed. System efficiencies greater than 60% were predicted when integrating the separated anode and cathode stream module configuration with a high efficiency catalytic gasifier.

  19. Knowledge Based Systems and Metacognition in Radar

    Science.gov (United States)

    Capraro, Gerard T.; Wicks, Michael C.

    An airborne ground looking radar sensor's performance may be enhanced by selecting algorithms adaptively as the environment changes. A short description of an airborne intelligent radar system (AIRS) is presented with a description of the knowledge based filter and detection portions. A second level of artificial intelligence (AI) processing is presented that monitors, tests, and learns how to improve and control the first level. This approach is based upon metacognition, a way forward for developing knowledge based systems.

  20. Port-based modeling of mechatronic systems

    NARCIS (Netherlands)

    Breedveld, Peter C.

    2004-01-01

    Many engineering activities, including mechatronic design, require that a multidomain or ‘multi-physics’ system and its control system be designed as an integrated system. This contribution discusses the background and tools for a port-based approach to integrated modeling and simulation of physical

  1. Fluidized bed control system based on inverse system method

    Institute of Scientific and Technical Information of China (English)

    SONG Fu-hua; LI Ping

    2005-01-01

    The invertible of the Large Air Dense Medium Fluidized Bed (ADMFB) were studied by introducing the concept of the inverse system theory of nonlinear systems.Then the ADMFB, which was a multivariable, nonlinear and coupled strongly system,was decoupled into independent SISO pseudo-linear subsystems. Linear controllers were designed for each of subsystems based on linear systems theory. The practice output proves that this method improves the stability of the ADMFB obviously.

  2. Android Based Mobile Drive System

    Directory of Open Access Journals (Sweden)

    Dr. Sheifali Gupta

    2014-01-01

    Full Text Available This project reports an undergraduate engineering team’s effort to develop a system to empower the people facing the problem of paralysis of various degrees like in Hemiplegia. To make their lives easier, a wheelchair working with an android application has been designed with the help of which paralysed person can move from one place to other and can control all the home appliances. He is also empowered with the facilities of calling and sending a message to the helper. This paper will outline and discuss the specifications and functions of the innovation done by us. It also tells how new technologies are used to provide improved support to the people bounded in their homes and make them independent of others..

  3. Fuzzy Case-Based Reasoning System

    Directory of Open Access Journals (Sweden)

    Jing Lu

    2016-06-01

    Full Text Available In this paper, we propose a fuzzy case-based reasoning system, using a case-based reasoning (CBR system that learns from experience to solve problems. Different from a traditional case-based reasoning system that uses crisp cases, our system works with fuzzy ones. Specifically, we change a crisp case into a fuzzy one by fuzzifying each crisp case element (feature, according to the maximum degree principle. Thus, we add the “vague” concept into a case-based reasoning system. It is these somewhat vague inputs that make the outcomes of the prediction more meaningful and accurate, which illustrates that it is not necessarily helpful when we always create accurate predictive relations through crisp cases. Finally, we prove this and apply this model to practical weather forecasting, and experiments show that using fuzzy cases can make some prediction results more accurate than using crisp cases.

  4. Model Based Testing for Agent Systems

    Science.gov (United States)

    Zhang, Zhiyong; Thangarajah, John; Padgham, Lin

    Although agent technology is gaining world wide popularity, a hindrance to its uptake is the lack of proper testing mechanisms for agent based systems. While many traditional software testing methods can be generalized to agent systems, there are many aspects that are different and which require an understanding of the underlying agent paradigm. In this paper we present certain aspects of a testing framework that we have developed for agent based systems. The testing framework is a model based approach using the design models of the Prometheus agent development methodology. In this paper we focus on model based unit testing and identify the appropriate units, present mechanisms for generating suitable test cases and for determining the order in which the units are to be tested, present a brief overview of the unit testing process and an example. Although we use the design artefacts from Prometheus the approach is suitable for any plan and event based agent system.

  5. Component Based Dynamic Reconfigurable Test System

    Institute of Scientific and Technical Information of China (English)

    LAI Hong; HE Lingsong; ZHANG Dengpan

    2006-01-01

    In this paper, a novel component based framework of test system is presented for the new requirements of dynamic changes of test functions and reconfiguration of test resources. The complexity of dynamic reconfiguration arises from the scale, redirection, extensibility and interconnection of components in test system. The paper is started by discussing the component assembly based framework which provide the open platform to the deploy of components and then the script interpreter model is introduced to dynamically create the components and build the test system by analyzing XML based information of test system. A pipeline model is presented to provide the data channels and behavior reflection among the components. Finally, a dynamic reconfigurable test system is implemented on the basis of COM and applied in the remote test and control system of CNC machine.

  6. Texture based iris recognition system

    Science.gov (United States)

    Mehrotra, Hunny; Gupta, Phalguni; Kaushik, Anil K.

    2008-04-01

    The paper proposes an efficient iris recognition algorithm, obtained through the fusion of Haar Wavelet and Circular Mellin operator. The recognition system preprocesses the captured iris image to remove the effect of holes or spot of light lying on the pupillary region which creates problem in pupil localization. The processed image is localized by detecting inner and outer boundaries from the pupil center using maximum value of the spectrum image. Then the eyelids are detected by fitting a 3 rd degree polynomial on the suitable edge segments and removing the region occluded by eyelids from the normalized iris image. The features for the iris pattern are extracted using Haar Wavelet and Circular Mellin operator. The Haar Wavelet decomposition reduces the size of feature vector while Circular Mellin operator is used for rotation and scale invariant feature extraction. The features are compared using Hamming Distance method and the fusion is done at decision level using Conjunction rule. The recognizer is found to be more robust with accuracy level more than 95%.

  7. Distributed Monitoring System Based on ICINGA

    CERN Multimedia

    Haen, C; Neufeld, N

    2011-01-01

    The LHCb online system relies on a large and heterogeneous I.T. infrastructure : it comprises more than 2000 servers and embedded systems and more than 200 network devices. While for the control and monitoring of detectors, PLCs, and readout boards an industry standard SCADA system PVSSII has been put in production, we use a low level monitoring system to monitor the control infrastructure itself. While our previous system was based on a single central NAGIOS server, our current system uses a distributed ICINGA infrastructure.

  8. Systems definition space based power conversion systems: Executive summary

    Science.gov (United States)

    1977-01-01

    Potential space-located systems for the generation of electrical power for use on earth were investigated. These systems were of three basic types: (1) systems producing electrical power from solar energy; (2) systems producing electrical power from nuclear reactors; (3) systems for augmenting ground-based solar power plants by orbital sunlight reflectors. Configurations implementing these concepts were developed through an optimization process intended to yield the lowest cost for each. A complete program was developed for each concept, identifying required production rates, quantities of launches, required facilities, etc. Each program was costed in order to provide the electric power cost appropriate to each concept.

  9. Web-based Project Reporting System

    Data.gov (United States)

    US Agency for International Development — Web-PRS is a web-based system that captures financial information and project status information that is sortable by geographical location, pillar, project type and...

  10. Pattern Based Term Extraction Using ACABIT System

    CERN Document Server

    Takeuchi, Koichi; Koyama, Teruo; Daille, Béatrice; Romary, Laurent

    2009-01-01

    In this paper, we propose a pattern-based term extraction approach for Japanese, applying ACABIT system originally developed for French. The proposed approach evaluates termhood using morphological patterns of basic terms and term variants. After extracting term candidates, ACABIT system filters out non-terms from the candidates based on log-likelihood. This approach is suitable for Japanese term extraction because most of Japanese terms are compound nouns or simple phrasal patterns.

  11. Base isolation system and verificational experiment of base isolated building

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, Mikio; Harada, Osamu; Aoyagi, Sakae; Matsuda, Taiji

    1987-05-15

    With the objective of rationalization of the earthquake resistant design and the economical design based thereupon, many base isolation systems have been proposed and its research, development and application have been made in recent years. In order to disseminate the system, it is necessary to accumulate the data obtained from vibration tests and earthquake observations and verify the reliability of the system. From this viewpoint, the Central Research Institute of Electric power Industry and Okumura Corporation did the following experiments with a base isolated building as the object: 1) static power application experiments, 2) shaking experiments, 3) free vibration experiments, 4) regular slight vibration observations and 5) earthquake response observations (continuing). This article reports the outline of the base isolation system and the base isolated building concerned as well as the results of the verification experiments 1) through 3) above. From the results of these verification experiments, the basic vibration characteristics of the base isolation system consisting of laminated rubber and plastic damper were revealed and its functions were able to be verified. Especially during the free vibration experiments, the initial displacement even up to a maximum of 10cm was applied to the portion between the foundation and the structure and this displacement corresponds to the responded amplitude in case of the earthquake of seismic intensity of the 6th degree. It is planned to continue the verification further. (18 figs, 3 tabs, 3 photos, 6 refs)

  12. Microprocessor-Based Laboratory Data Acquisition Systems.

    Science.gov (United States)

    Woodard, F. E.; And Others

    1981-01-01

    Focuses on attributes of microcomputer systems which affect their usefulness in a laboratory environment. In addition to presenting general concepts, comments are made regarding the implementation of these concepts using a microprocessor-based data acquisition system developed at the University of North Carolina. (CO)

  13. Chip based electroanalytical systems for cell analysis

    DEFF Research Database (Denmark)

    Spegel, C.; Heiskanen, A.; Skjolding, L.H.D.

    2008-01-01

    This review with 239 references has as its aim to give the reader an introduction to the kinds of methods used for developing microchip based electrode systems as well as to cover the existing literature on electroanalytical systems where microchips play a crucial role for 'nondestructive...

  14. Analysis of Cloud-Based Database Systems

    Science.gov (United States)

    2015-06-01

    University San Luis Obispo, 2009 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN COMPUTER SCIENCE...for a query to complete on average for the production system was 136,746 xvi microseconds. On our cloud-based system, the average was 198,875

  15. Phased array based ultrasound scanning system development

    Science.gov (United States)

    Sagdiev, R. K.; Denisov, E. S.; Evdokimov, Yu K.; Fazlyyyakhmatov, M. G.; Kashapov, N. F.

    2014-12-01

    Multichannel ultrasound scanning system based on phased arrays development is presented in this paper. Substantiation of system parameters is presented. The description of block diagram and hardware development is presented. The combination of the self-developed receiving and a transmitting units and commercially available FPGA unit and Personal Computer can solve our scientific goals, while providing a relatively low device cost.

  16. NASA Administrative Data Base Management Systems, 1984

    Science.gov (United States)

    Radosevich, J. D. (Editor)

    1984-01-01

    Strategies for converting to a data base management system (DBMS) and the implementation of the software packages necessary are discussed. Experiences with DBMS at various NASA centers are related including Langley's ADABAS/NATURAL and the NEMS subsystem of the NASA metrology informaton system. The value of the integrated workstation with a personal computer is explored.

  17. Linear systems a measurement based approach

    CERN Document Server

    Bhattacharyya, S P; Mohsenizadeh, D N

    2014-01-01

    This brief presents recent results obtained on the analysis, synthesis and design of systems described by linear equations. It is well known that linear equations arise in most branches of science and engineering as well as social, biological and economic systems. The novelty of this approach is that no models of the system are assumed to be available, nor are they required. Instead, a few measurements made on the system can be processed strategically to directly extract design values that meet specifications without constructing a model of the system, implicitly or explicitly. These new concepts are illustrated by applying them to linear DC and AC circuits, mechanical, civil and hydraulic systems, signal flow block diagrams and control systems. These applications are preliminary and suggest many open problems. The results presented in this brief are the latest effort in this direction and the authors hope these will lead to attractive alternatives to model-based design of engineering and other systems.

  18. Signature Based Intrusion Detection System Using SNORT

    Directory of Open Access Journals (Sweden)

    Vinod Kumar

    2012-11-01

    Full Text Available Now a day’s Intrusion Detection systems plays very important role in Network security. As the use of internet is growing rapidly the possibility of attack is also increasing in that ratio. People are using signature based IDS’s. Snort is mostly used signature based IDS because of it is open source software. World widely it is used in intrusion detection and prevention domain. Basic analysis and security engine (BASE is also used to see the alerts generated by Snort. In the paper we have implementation the signature based intrusion detection using Snort. Our work will help to novel user to understand the concept of Snort based IDS.

  19. Web-based PACS and EHR system

    Science.gov (United States)

    Parikh, Ashesh; Mehta, Nihal

    2015-03-01

    We demonstrate how a cloud-based PACS can exchange information with other medical systems, including other cloud-based PACS, to provide a comprehensive and integrated view of a patient's health record. Such a consolidated report will lead to improved patient care.

  20. Multichannel CGI system based on PCs

    Science.gov (United States)

    Wang, Runjie; Tian, Jingquan; Ni, Zhengguo; Chen, Lei

    2005-02-01

    Computer Generation Image (CGI) system is main part of the flight simulator. Usually, the Image Generation Workstation to be used in CGI system is very expensive. This paper presents a low cost CGI system based on PC and we use it to develop a flight simulator, which has a 3 channels display system with wide field-of-view (horizontal 240°× vertical 60°). First, the paper discusses the architectural principles of CGI system and provides a CGI system based on PC. Second, a type of 3 channels display system is described. The display system is designed in folded flat screen using rear project curtain. Adjacent screen shapes a 100° corner and each channel provides 80°×60° field-of-view. Furthermore, some key technologies, such as image connection, channels synchronization and channels communication, are discussed in detail. At the end of paper, a flight simulator with 3 channels visual scene is described and it is successfully implemented in training pilot. PC-Based CGI system also can be applied to a lot of fields including multimedia commerce, medical media databases visualization, CAD/CAM, scientific computing visualization, and entertainment.

  1. Improved biosensor-based detection system

    DEFF Research Database (Denmark)

    2015-01-01

    Described is a new biosensor-based detection system for effector compounds, useful for in vivo applications in e.g. screening and selecting of cells which produce a small molecule effector compound or which take up a small molecule effector compound from its environment. The detection system...... comprises a protein or RNA-based biosensor for the effector compound which indirectly regulates the expression of a reporter gene via two hybrid proteins, providing for fewer false signals or less 'noise', tuning of sensitivity or other advantages over conventional systems where the biosensor directly...

  2. Developing stereo image based robot control system

    Science.gov (United States)

    Suprijadi, Pambudi, I. R.; Woran, M.; Naa, C. F.; Srigutomo, W.

    2015-04-01

    Application of image processing is developed in various field and purposes. In the last decade, image based system increase rapidly with the increasing of hardware and microprocessor performance. Many fields of science and technology were used this methods especially in medicine and instrumentation. New technique on stereovision to give a 3-dimension image or movie is very interesting, but not many applications in control system. Stereo image has pixel disparity information that is not existed in single image. In this research, we proposed a new method in wheel robot control system using stereovision. The result shows robot automatically moves based on stereovision captures.

  3. Developing stereo image based robot control system

    Energy Technology Data Exchange (ETDEWEB)

    Suprijadi,; Pambudi, I. R.; Woran, M.; Naa, C. F; Srigutomo, W. [Department of Physics, FMIPA, InstitutTeknologi Bandung Jl. Ganesha No. 10. Bandung 40132, Indonesia supri@fi.itb.ac.id (Indonesia)

    2015-04-16

    Application of image processing is developed in various field and purposes. In the last decade, image based system increase rapidly with the increasing of hardware and microprocessor performance. Many fields of science and technology were used this methods especially in medicine and instrumentation. New technique on stereovision to give a 3-dimension image or movie is very interesting, but not many applications in control system. Stereo image has pixel disparity information that is not existed in single image. In this research, we proposed a new method in wheel robot control system using stereovision. The result shows robot automatically moves based on stereovision captures.

  4. Architecture Of A Identity Based Firewall System

    CERN Document Server

    Stojanovski, Nenad

    2011-01-01

    Classic firewall systems are built to filter traffic based on IP addresses, source and destination ports and protocol types. The modern networks have grown to a level where the possibility for users' mobility is a must. In such networks, modern firewalls may introduce such complexity where administration can become very frustrating since it needs the intervention of a firewall administrator. The solution for this problem is an identity based firewall system. In this paper we will present a new design of a firewall system that uses the user's identity to filter the traffic. In the design phase we will define key points which have to be satisfied as a crucial milestone for the functioning of the whole Identity based firewall system.

  5. Current trends on knowledge-based systems

    CERN Document Server

    Valencia-García, Rafael

    2017-01-01

    This book presents innovative and high-quality research on the implementation of conceptual frameworks, strategies, techniques, methodologies, informatics platforms and models for developing advanced knowledge-based systems and their application in different fields, including Agriculture, Education, Automotive, Electrical Industry, Business Services, Food Manufacturing, Energy Services, Medicine and others. Knowledge-based technologies employ artificial intelligence methods to heuristically address problems that cannot be solved by means of formal techniques. These technologies draw on standard and novel approaches from various disciplines within Computer Science, including Knowledge Engineering, Natural Language Processing, Decision Support Systems, Artificial Intelligence, Databases, Software Engineering, etc. As a combination of different fields of Artificial Intelligence, the area of Knowledge-Based Systems applies knowledge representation, case-based reasoning, neural networks, Semantic Web and TICs used...

  6. Systems Engineering Education Based on Evolutional Project-Based Learning

    Science.gov (United States)

    Inoue, Masahiro; Hasegawa, Hiroshi

    The knowledge and skills in systems engineering including project management are necessary for engineers who are engaged in planning and developing systems. Experiences of project execution are necessary for understanding systems engineering. Challenge is how to teach systems engineering to students who have scarce project experiences. In the education, giving the experience including a real experience and a pseudo-experience will be indispensable. In this paper, systems engineering education by evolutional Project-Based Learning (PBL) is designed and evaluated. In curriculum, exercises and lectures are executed alternately and evolutionally in three steps of PBLs ; Workshop of System Thinking, mathematical knowledge and technique are delivered in the first step PBL. Techniques of systems engineering are provided in the second step PBL. Finally project management is obtained in the third step PBL. Execution and evaluation of the education show that the Evolutional Project-Based Learning of systems engineering is effective not only to improve knowledge and experience of students but also to motivate students to study systems engineering.

  7. UNIX-based operating systems robustness evaluation

    Science.gov (United States)

    Chang, Yu-Ming

    1996-01-01

    Robust operating systems are required for reliable computing. Techniques for robustness evaluation of operating systems not only enhance the understanding of the reliability of computer systems, but also provide valuable feed- back to system designers. This thesis presents results from robustness evaluation experiments on five UNIX-based operating systems, which include Digital Equipment's OSF/l, Hewlett Packard's HP-UX, Sun Microsystems' Solaris and SunOS, and Silicon Graphics' IRIX. Three sets of experiments were performed. The methodology for evaluation tested (1) the exception handling mechanism, (2) system resource management, and (3) system capacity under high workload stress. An exception generator was used to evaluate the exception handling mechanism of the operating systems. Results included exit status of the exception generator and the system state. Resource management techniques used by individual operating systems were tested using programs designed to usurp system resources such as physical memory and process slots. Finally, the workload stress testing evaluated the effect of the workload on system performance by running a synthetic workload and recording the response time of local and remote user requests. Moderate to severe performance degradations were observed on the systems under stress.

  8. FIPA agent based network distributed control system

    Energy Technology Data Exchange (ETDEWEB)

    D. Abbott; V. Gyurjyan; G. Heyes; E. Jastrzembski; C. Timmer; E. Wolin

    2003-03-01

    A control system with the capabilities to combine heterogeneous control systems or processes into a uniform homogeneous environment is discussed. This dynamically extensible system is an example of the software system at the agent level of abstraction. This level of abstraction considers agents as atomic entities that communicate to implement the functionality of the control system. Agents' engineering aspects are addressed by adopting the domain independent software standard, formulated by FIPA. Jade core Java classes are used as a FIPA specification implementation. A special, lightweight, XML RDFS based, control oriented, ontology markup language is developed to standardize the description of the arbitrary control system data processor. Control processes, described in this language, are integrated into the global system at runtime, without actual programming. Fault tolerance and recovery issues are also addressed.

  9. RFI-Based Ion Linac Systems

    Science.gov (United States)

    Swenson, Donald A.

    A new company, Ion Linac Systems, Inc., has been formed to promote the development, manufacture, and marketing of intense, RFI-based, Ion Linac Systems. The Rf Focused Interdigital (RFI) linac structure was invented by the author while at Linac Systems, LLC. The first step, for the new company, will be to correct a flaw in an existing RFI-based linac system and to demonstrate "good transmission" through the system. The existing system, aimed at the BNCT medical application, is designed to produce a beam of 2.5 MeV protons with an average beam current of 20 mA. In conjunction with a lithium target, it will produce an intense beam of epithermal neutrons. This system is very efficient, requiring only 180 kW of rf power to produce a 50 kW proton beam. In addition to the BNCT medical application, the RFI-based systems should represent a powerful neutron generator for homeland security, defence applications, cargo container inspection, and contraband detection. The timescale to the demonstration of "good transmission" is early fall of this year. Our website is www.ionlinacs.com.

  10. Archaeal CRISPR-based immune systems

    DEFF Research Database (Denmark)

    Garrett, Roger A; Vestergaard, Gisle Alberg; Shah, Shiraz Ali

    2011-01-01

    CRISPR (clustered regularly interspaced short palindromic repeats)-based immune systems are essentially modular with three primary functions: the excision and integration of new spacers, the processing of CRISPR transcripts to yield mature CRISPR RNAs (crRNAs), and the targeting and cleavage...... of foreign nucleic acid. The primary target appears to be the DNA of foreign genetic elements, but the CRISPR/Cmr system that is widespread amongst archaea also specifically targets and cleaves RNA in vitro. The archaeal CRISPR systems tend to be both diverse and complex. Here we examine evidence...... of CRISPR loci and the evidence for intergenomic exchange of CRISPR systems....

  11. An Agent-Based Distributed Manufacturing System

    Institute of Scientific and Technical Information of China (English)

    J.Li; J.Y.H.Fuh; Y.F.Zhang; A.Y.C.Nee

    2006-01-01

    Agent theories have shown their promising capability in solving distributed complex system ever since its development. In this paper, one multi-agent based distributed product design and manufacturing planning system is presented. The objective of the research is to develop a distributed collaborative design environment for supporting cooperation among the existing engineering functions. In the system, the functional agents for design, manufacturability evaluation,process planning and scheduling are efficiently integrated with a facilitator agent. This paper firstly gives an introduction to the system structure, and the definitions for each executive agent are then described and a prototype of the proposed is also included at the end part.

  12. Information encryption systems based on Boolean functions

    Directory of Open Access Journals (Sweden)

    Aureliu Zgureanu

    2011-02-01

    Full Text Available An information encryption system based on Boolean functions is proposed. Information processing is done using multidimensional matrices, performing logical operations with these matrices. At the basis of ensuring high level security of the system the complexity of solving the problem of building systems of Boolean functions that depend on many variables (tens and hundreds is set. Such systems represent the private key. It varies both during the encryption and decryption of information, and during the transition from one message to another.

  13. Data base systems in electronic design engineering

    Science.gov (United States)

    Williams, D.

    1980-01-01

    The concepts of an integrated design data base system (DBMS) as it might apply to an electronic design company are discussed. Data elements of documentation, project specifications, project tracking, firmware, software, electronic and mechanical design can be integrated and managed through a single DBMS. Combining the attributes of a DBMS data handler with specialized systems and functional data can provide users with maximum flexibility, reduced redundancy, and increased overall systems performance. Although some system overhead is lost due to redundancy in transitory data, it is believed the combination of the two data types is advisable rather than trying to do all data handling through a single DBMS.

  14. Global System for Mobile Communication Based Smart Home Security System

    Directory of Open Access Journals (Sweden)

    Amrit Zoad

    2014-07-01

    Full Text Available Home security system is needed for occupants' convenience and safety. In this paper, we present the design and implementation of an affordable, low power consumption, and GSM (Global System for Mobile Communication based wireless home security system. In existing system, the home network is engaged with non-wireless technology, where the installation and maintenance is difficult. So the system cost is very high. In our proposed system, these difficulties are overcome by introducing a wireless home network which contains a GPRS Gateway and three kinds of security nodes namely door security node, anti intrusion node and SMS node to inform the user. The nodes are easy installing. All the three nodes are connected to the microcontroller.

  15. Knowledge-based systems and software engineering

    Energy Technology Data Exchange (ETDEWEB)

    Bader, J.L.

    1988-01-01

    This work was carried out as part of a collaborative Alvey software engineering project (project number SE057). The project collaborators were the Inter-Disciplinary Higher Degrees Scheme of the University of Aston in Birmingham, BIS Applied Systems Ltd. (BIS) and the British Steel Corporation. The aim of the project was to investigate the potential application of knowledge-based systems (KBSs) to the design of commercial data processing (DP) systems. The work was primarily concerned with BIS's Structured Systems Design (SSD) methodology for DP systems development and how users of this methodology could be supported using KBS tools. The problems encountered by users of SSD are discussed, and potential forms of computer-based support for inexpert designers are identified. The architecture for a support environment for SSD is proposed based on the integration of KBS and non-KBS tools for individual design tasks within SSD - the Intellipse system. The potential role of KBS tools in the domain of data-base design is discussed. The need for operational KBSs to be built to the same standards as other commercial and industrial software is identified.

  16. Assembly design system based on engineering connection

    Science.gov (United States)

    Yin, Wensheng

    2016-12-01

    An assembly design system is an important part of computer-aided design systems, which are important tools for realizing product concept design. The traditional assembly design system does not record the connection information of production on the engineering layer; consequently, the upstream design idea cannot be fully used in the downstream design. An assembly design model based on the relationship of engineering connection is presented. In this model, all nodes are divided into two categories: The component and the connection. Moreover, the product is constructed on the basis of the connection relationship of the components. The model is an And/Or graph and has the ability to record all assembly schemes. This model records only the connection information that has engineering application value in the product design. In addition, this model can significantly reduce the number of combinations, and is very favorable for the assembly sequence planning in the downstream. The system contains a connection knowledge system that can be mapped to the connection node, and the connection knowledge obtained in practice can be returned to the knowledge system. Finally, VC++ 6.0 is used to develop a prototype system called Connect-based Assembly Planning (CAP). The relationship between the CAP system and the commercial assembly design system is also established.

  17. Research of internet worm warning system based on system identification

    Institute of Scientific and Technical Information of China (English)

    Tao ZHOU; Guanzhong DAI; Huimin YE

    2006-01-01

    The frequent explosion of Internet worms has been one of the most serious problems in cyberspace security.In this paper, by analyzing the worm's propagation model, we propose a new worm warning system based on the method of system identification, and use recursive least squares algorithm to estimate the worm's infection rate. The simulation result shows the method we adopted is an efficient way to conduct Internet worm warning.

  18. 78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-09-23

    ... RIN 3206-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal... Industry Classification System (NAICS) codes currently used in Federal Wage System wage survey industry... 2007 North American Industry Classification System (NAICS) codes used in Federal Wage System (FWS)...

  19. Agents-based distributed processes control systems

    Directory of Open Access Journals (Sweden)

    Adrian Gligor

    2011-12-01

    Full Text Available Large industrial distributed systems have revealed a remarkable development in recent years. We may note an increase of their structural and functional complexity, at the same time with those on requirements side. These are some reasons why there are involvednumerous researches, energy and resources to solve problems related to these types of systems. The paper addresses the issue of industrial distributed systems with special attention being given to the distributed industrial processes control systems. A solution for a distributed process control system based on mobile intelligent agents is presented.The main objective of the proposed system is to provide an optimal solution in terms of costs, maintenance, reliability and flexibility. The paper focuses on requirements, architecture, functionality and advantages brought by the proposed solution.

  20. Structural choice based on knowledge discovery system

    Institute of Scientific and Technical Information of China (English)

    邢方亮; 王光远

    2002-01-01

    Structural choice is a significant decision having an important influence on structural function, socialeconomics, structural reliability and construction cost. A Case Based Reasoning system with its retrieval partconstructed with a KDD subsystem, is put forward to make a decision for a large scale engineering project. Atypical CBR system consists of four parts: case representation, case retriever, evaluation, and adaptation. Acase library is a set of parameterized excellent and successful structures. For a structural choice, the key pointis that the system must be able to detect the pattern classes hidden in the case library and classify the input pa-rameters into classes properly. That is done by using the KDD Data Mining algorithm based on Self-OrganizingFeature Maps ( SOFM), which makes the whole system more adaptive, self-organizing, self-learning and open.

  1. Vision based systems for UAV applications

    CERN Document Server

    Kuś, Zygmunt

    2013-01-01

    This monograph is motivated by a significant number of vision based algorithms for Unmanned Aerial Vehicles (UAV) that were developed during research and development projects. Vision information is utilized in various applications like visual surveillance, aim systems, recognition systems, collision-avoidance systems and navigation. This book presents practical applications, examples and recent challenges in these mentioned application fields. The aim of the book is to create a valuable source of information for researchers and constructors of solutions utilizing vision from UAV. Scientists, researchers and graduate students involved in computer vision, image processing, data fusion, control algorithms, mechanics, data mining, navigation and IC can find many valuable, useful and practical suggestions and solutions. The latest challenges for vision based systems are also presented.

  2. The internet based on presence system technology*

    Science.gov (United States)

    Styugin, M.; Kaygorodov, A.

    2016-04-01

    In our study we analyze how to create the systems based on “communication-resource-presence”- technology. We formulate functional and architectural requirements. It is shown some new features in this systems that pertain to communication and information search on the Internet. The Internet passed three infrastructure stages from the communication between two hosts to the resource intermediation and communication in real presence systems. The systems based on the presence technologies have just started to develop. Our study shows what criteria’s they must meet. One of this criteria is the division of site resources into the "rooms" logically separated from each other. The users can see and connect to each other. The contextual data of user presence in a particular "room" can be used when searching for them in the context of professional competence.

  3. Image-based Vehicle Classification System

    CERN Document Server

    Ng, Jun Yee

    2012-01-01

    Electronic toll collection (ETC) system has been a common trend used for toll collection on toll road nowadays. The implementation of electronic toll collection allows vehicles to travel at low or full speed during the toll payment, which help to avoid the traffic delay at toll road. One of the major components of an electronic toll collection is the automatic vehicle detection and classification (AVDC) system which is important to classify the vehicle so that the toll is charged according to the vehicle classes. Vision-based vehicle classification system is one type of vehicle classification system which adopt camera as the input sensing device for the system. This type of system has advantage over the rest for it is cost efficient as low cost camera is used. The implementation of vision-based vehicle classification system requires lower initial investment cost and very suitable for the toll collection trend migration in Malaysia from single ETC system to full-scale multi-lane free flow (MLFF). This project ...

  4. KEPEMIMPINAN PENDIDIKAN YANG INOVATIF

    Directory of Open Access Journals (Sweden)

    Aminuddin Syam

    2012-07-01

    Full Text Available The government policy on autonomy of education should be followed by the inovation in many components of education institutions, especially in their management level. The appropriate management in autonomous era is that the existence of inovative leadership. In other words, they have clear vision, mission, will, and commitment to do inovations. Thus, the education institution under this inovative leadership will reach their aims based the autonomy demands quickly.

  5. Experimental OAI-Based Digital Library Systems

    Science.gov (United States)

    Nelson, Michael L. (Editor); Maly, Kurt (Editor); Zubair, Mohammad (Editor); Rusch-Feja, Diann (Editor)

    2002-01-01

    The objective of Open Archives Initiative (OAI) is to develop a simple, lightweight framework to facilitate the discovery of content in distributed archives (http://www.openarchives.org). The focus of the workshop held at the 5th European Conference on Research and Advanced Technology for Digital Libraries (ECDL 2001) was to bring researchers in the area of digital libraries who are building OAI based systems so as to share their experiences, problems they are facing, and approaches they are taking to address them. The workshop consisted of invited talks from well-established researchers working in building OAI based digital library system along with short paper presentations.

  6. Software Engineering and Swarm-Based Systems

    Science.gov (United States)

    Hinchey, Michael G.; Sterritt, Roy; Pena, Joaquin; Rouff, Christopher A.

    2006-01-01

    We discuss two software engineering aspects in the development of complex swarm-based systems. NASA researchers have been investigating various possible concept missions that would greatly advance future space exploration capabilities. The concept mission that we have focused on exploits the principles of autonomic computing as well as being based on the use of intelligent swarms, whereby a (potentially large) number of similar spacecraft collaborate to achieve mission goals. The intent is that such systems not only can be sent to explore remote and harsh environments but also are endowed with greater degrees of protection and longevity to achieve mission goals.

  7. Ontology-Based Classification System Development Methodology

    Directory of Open Access Journals (Sweden)

    Grabusts Peter

    2015-12-01

    Full Text Available The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision tree-based classification systems has been researched. Using such methodologies, the classification accuracy in some cases can be improved.

  8. Model-based testing for embedded systems

    CERN Document Server

    Zander, Justyna; Mosterman, Pieter J

    2011-01-01

    What the experts have to say about Model-Based Testing for Embedded Systems: "This book is exactly what is needed at the exact right time in this fast-growing area. From its beginnings over 10 years ago of deriving tests from UML statecharts, model-based testing has matured into a topic with both breadth and depth. Testing embedded systems is a natural application of MBT, and this book hits the nail exactly on the head. Numerous topics are presented clearly, thoroughly, and concisely in this cutting-edge book. The authors are world-class leading experts in this area and teach us well-used

  9. Privacy Preserving Recommendation System Based on Groups

    OpenAIRE

    Shang, Shang; Hui, Yuk; Hui, Pan; Cuff, Paul; Kulkarni, Sanjeev

    2013-01-01

    Recommendation systems have received considerable attention in the recent decades. Yet with the development of information technology and social media, the risk in revealing private data to service providers has been a growing concern to more and more users. Trade-offs between quality and privacy in recommendation systems naturally arise. In this paper, we present a privacy preserving recommendation framework based on groups. The main idea is to use groups as a natural middleware to preserve ...

  10. Laser Based 3D Volumetric Display System

    Science.gov (United States)

    1993-03-01

    Literature, Costa Mesa, CA July 1983. 3. "A Real Time Autostereoscopic Multiplanar 3D Display System", Rodney Don Williams, Felix Garcia, Jr., Texas...8217 .- NUMBERS LASER BASED 3D VOLUMETRIC DISPLAY SYSTEM PR: CD13 0. AUTHOR(S) PE: N/AWIU: DN303151 P. Soltan, J. Trias, W. Robinson, W. Dahlke 7...laser generated 3D volumetric images on a rotating double helix, (where the 3D displays are computer controlled for group viewing with the naked eye

  11. Ionospheric Challenges for GNSS Based Augmentation Systems

    Science.gov (United States)

    Doherty, P.; Valladares, C. E.

    2007-12-01

    The ionosphere is a highly dynamic physical phenomenon that presents a variable source of error for Global Navigation Satellite System (GNSS) signals and GNSS based operational systems. The Federal Aviation Administration's (FAA) Wide-Area Augmentation System (WAAS) was designed to enhance the GNSS standard positioning service by providing additional accuracy, availability and integrity that is sufficient for use in commercial aviation. It is the first of a number of planned regional Satellite Based Augmentation Systems (SBAS). Other systems in development include the European EGNOS system, the MSAS system in Japan and the GAGAN system in India. In addition, the South American countries are investigating the feasibility of operating an SBAS system in this region. Much of the WAAS ionospheric research and development focused on defining and mitigating ionospheric challenges characteristic of the mid-latitude regions, where the ionosphere is well studied and relatively quiescent. The EGNOS and MSAS systems will primarily operate under a similarly quiescent mid-latitude ionosphere. SBAS system development in South America, India and other low-latitude regions, however, will have to contend with much more extreme conditions. These conditions include strong spatial and temporal gradients, plasma depletions and scintillation. All of these conditions have a potential to limit SBAS performance in the low latitude regions. This presentation will review the effects that the ionosphere has on the mid-latitude WAAS system. It will present the techniques that are used to mitigate ionospheric disturbances induced on the system during severe geomagnetic activity and it will quantify the effect that this activity has on system performance. The presentation will then present data from the South American Low-latitude Ionospheric Sensor Network (LISN) that can be used to infer the ionospheric effects on SBAS performance in the most challenging low-latitude ionospheric environment

  12. A Knowledge-based Stampability Evaluation System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The aim, characteristics and requirements of stampability evaluation are identified.As sam-pability evaluation is highly skill-intensive and requires a wide variety of design expertise and knowledge, a knowledge based system is proposed for implementing the stampability evaluation.The stampability eval uation knowledge representation,and processing phases are illustrated. A case study demonstrates the feasibility of the knowledge based approach to stampability evalu-ation.

  13. Web-Based Adaptive Testing System

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Due to the maturing of Internet technology, the adaptive testing can be utilized in the web-based environment and the examinee can take the test anywhere and any time. The purpose of the research is to apply item response theory (IRT), adaptive testing theory and web-service technique to construct an XML format itembank and a system of web-based adaptive testing (WAT) by the framework of three-tiered client server distance testing.

  14. System-Awareness for Agent-based Power System Control

    DEFF Research Database (Denmark)

    Heussen, Kai; Saleem, Arshad; Lind, Morten

    2010-01-01

    Operational intelligence in electric power systems is focused in a small number of control rooms that coordinate their actions. A clear division of responsibility and a command hierarchy organize system operation. With multi-agent based control systems, this control paradigm may be shifted...... to a more decentralized openaccess collaboration control paradigm. This shift cannot happen at once, but must fit also with current operation principles. In order to establish a scalable and transparent system control architecture, organizing principles have to be identified that allow for a smooth...... transition. This paper presents a concept for the representation and organization of control- and resource-allocation, enabling computational reasoning and system awareness. The principles are discussed with respect to a recently proposed Subgrid operation concept....

  15. PROLOG BASED AN INTELLIGENT TUTORING SYSTEM (ITS

    Directory of Open Access Journals (Sweden)

    Funda DAĞ

    2004-04-01

    Full Text Available In this study; components of a web-based general purpose Intelligent Tutoring System (ITS has been realized by using Visual Prolog. A framework of the system has been constructed to apply various lesson. An ITS consists of four fundamental models which are domain expert model, user model, instruction model and user interface model. In this study, domain expert model, user model and user interface model have been realized. There are user interfaces for both author and student in the system. We aimed in this study, developing studies on ITS in our country and constructing a framework for an ITS.

  16. Realization-Based System Identification with Applications

    Science.gov (United States)

    Miller, Daniel N.

    The identification of dynamic system behavior from experimentally measured or computationally simulated data is fundamental to the fields of control system design, modal analysis, and defect detection. In this dissertation, methods for system identification are developed based on classical linear system realization theory. The common methods of state-space realization from a measured, discrete-time impulse response are generalized to the following additional types of experiments: measured step responses, arbitrary sets of input-output data, and estimated cross-covariance functions of input-output data. The methods are particularly well suited to systems with large input and/or output dimension, for which classical system identification methods based on maximum likelihood estimation may fail due to their reliance on non-convex optimizations. The realization-based methods by themselves require a finite number of linear algebraic operations. Because these methods implicitly optimize cost functions that are linear in state-space parameters, they may be augmented with convex constraints to form convex optimization problems. Several common behavioral constraints are translated into eigenvalue constraints stated as linear matrix inequalities, and the realization-based methods are converted into semidefinite programming problems. Some additional constraints on transient and steady-state behavior are derived and incorporated into a quadratic program, which is solved following the semidefinite program. The newly developed realization-based methods are applied to two experiments: the aeroelastic response of a fighter aircraft and the transient thermal behavior of a light-emitting diode. The algorithms for each experiment are implemented in two freely available software packages.

  17. Rural Logistics System Based on Rural Informatization

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Current status of rural informatization construction in China,including the relatively weak rural informatization,asymmetric market information,low level of information sharing,dispersedly allocated resources and no cross point among each other are analyzed.The importance of informatization in rural logistic system is introduced:firstly,decision making of logistics system plan is based on information.Secondly,improvement of the overall efficiency of logistics system is based on information.Thirdly,logistics transmission takes the Internet as the carrier.Necessity of rural logistics system is discussed from five aspects of increasing the employment of farmers,enhancing the income of farmers,reducing the blindness of agricultural production and circulation,sharing the risks of agricultural management,and promoting the rural economic restructuring.According to the above five steps,five countermeasures are posed in order to improve the rural logistics system.The countermeasures cover the aspects of deepening the information awareness of government,establishing a rural informatization system suited to the national condition of China,strengthening the information infrastructure in rural areas,promoting the integration of rural information resources and establishing the training system for agricultural information talents.

  18. Model-based control of networked systems

    CERN Document Server

    Garcia, Eloy; Montestruque, Luis A

    2014-01-01

    This monograph introduces a class of networked control systems (NCS) called model-based networked control systems (MB-NCS) and presents various architectures and control strategies designed to improve the performance of NCS. The overall performance of NCS considers the appropriate use of network resources, particularly network bandwidth, in conjunction with the desired response of the system being controlled.   The book begins with a detailed description of the basic MB-NCS architecture that provides stability conditions in terms of state feedback updates . It also covers typical problems in NCS such as network delays, network scheduling, and data quantization, as well as more general control problems such as output feedback control, nonlinear systems stabilization, and tracking control.   Key features and topics include: Time-triggered and event-triggered feedback updates Stabilization of uncertain systems subject to time delays, quantization, and extended absence of feedback Optimal control analysis and ...

  19. Model Based Control of Refrigeration Systems

    DEFF Research Database (Denmark)

    Larsen, Lars Finn Sloth

    for automation of these procedures, that is to incorporate some "intelligence" in the control system, this project was started up. The main emphasis of this work has been on model based methods for system optimizing control in supermarket refrigeration systems. The idea of implementing a system optimizing...... optimizing the steady state operation "set-point optimizing control" and a part optimizing dynamic behaviour of the system "dynamical optimizing control". A novel approach for set-point optimization will be presented. The general idea is to use a prediction of the steady state, for computation of the cost...... that the crosscouplings are disregarded. Though these cross couplings are relatively weak, it turns out that they pose a major problem when hysteresis controllers are used in the local loops. It can namely cause synchronization of the distributed hysteresis controllers, thus accumulating the effects of the cross...

  20. FPGA based Smart Wireless MIMO Control System

    Science.gov (United States)

    Usman Ali, Syed M.; Hussain, Sajid; Akber Siddiqui, Ali; Arshad, Jawad Ali; Darakhshan, Anjum

    2013-12-01

    In our present work, we have successfully designed, and developed an FPGA based smart wireless MIMO (Multiple Input & Multiple Output) system capable of controlling multiple industrial process parameters such as temperature, pressure, stress and vibration etc. To achieve this task we have used Xilin x Spartan 3E FPGA (Field Programmable Gate Array) instead of conventional microcontrollers. By employing FPGA kit to PC via RF transceivers which has a working range of about 100 meters. The developed smart system is capable of performing the control task assigned to it successfully. We have also provided a provision to our proposed system that can be accessed for monitoring and control through the web and GSM as well. Our proposed system can be equally applied to all the hazardous and rugged industrial environments where a conventional system cannot work effectively.

  1. Multi region based image retrieval system

    Indian Academy of Sciences (India)

    P Manipoonchelvi; K Muneeswaran

    2014-04-01

    Multimedia information retrieval systems continue to be an active research area in the world of huge and voluminous data. The paramount challenge is to translate or convert a visual query from a human and find similar images or videos in large digital collection. In this paper, a technique of region based image retrieval, a branch of Content Based Image Retrieval, is proposed. The proposed model does not need prior knowledge or full semantic understanding of image content. It identifies significant regions in an image based on feature-based attention model which mimic viewer’s attention. The Curvelet Transform in combination with colour descriptors are used to represent each significant region in an image. Experimental results are analysed and compared with the state-of-the-art Region Based Image Retrieval Technique.

  2. [Portable Epileptic Seizure Monitoring Intelligent System Based on Android System].

    Science.gov (United States)

    Liang, Zhenhu; Wu, Shufeng; Yang, Chunlin; Jiang, Zhenzhou; Yu, Tao; Lu, Chengbiao; Li, Xiaoli

    2016-02-01

    The clinical electroencephalogram (EEG) monitoring systems based on personal computer system can not meet the requirements of portability and home usage. The epilepsy patients have to be monitored in hospital for an extended period of time, which imposes a heavy burden on hospitals. In the present study, we designed a portable 16-lead networked monitoring system based on the Android smart phone. The system uses some technologies including the active electrode, the WiFi wireless transmission, the multi-scale permutation entropy (MPE) algorithm, the back-propagation (BP) neural network algorithm, etc. Moreover, the software of Android mobile application can realize the processing and analysis of EEG data, the display of EEG waveform and the alarm of epileptic seizure. The system has been tested on the mobile phones with Android 2. 3 operating system or higher version and the results showed that this software ran accurately and steadily in the detection of epileptic seizure. In conclusion, this paper provides a portable and reliable solution for epileptic seizure monitoring in clinical and home applications.

  3. A PC based thin film dosimeter system

    DEFF Research Database (Denmark)

    Miller, A.; Hargittai, P.; Kovacs, A.

    2000-01-01

    A dosimeter system based on the Riso B3 dosimeter film, an office scanner for use with PC and the associated software is presented. The scanned image is analyzed either with standard software (Paint Shop Pro 5 or Excel) functions or with the computer code "Scanalizer" that allows presentation...

  4. Adaptive Device Context Based Mobile Learning Systems

    Science.gov (United States)

    Pu, Haitao; Lin, Jinjiao; Song, Yanwei; Liu, Fasheng

    2011-01-01

    Mobile learning is e-learning delivered through mobile computing devices, which represents the next stage of computer-aided, multi-media based learning. Therefore, mobile learning is transforming the way of traditional education. However, as most current e-learning systems and their contents are not suitable for mobile devices, an approach for…

  5. Patterns in rational base number systems

    CERN Document Server

    Morgenbesser, Johannes F; Thuswaldner, Jörg

    2012-01-01

    Number systems with a rational number $a/b > 1$ as base have gained interest in recent years. In particular, relations to Mahler's 3/2-problem as well as the Josephus problem have been established. In the present paper we show that the patterns of digits in the representations of positive integers in such a number system are uniformly distributed. We study the sum-of-digits function of number systems with rational base $a/b$ and use representations w.r.t. this base to construct normal numbers in base $a$ in the spirit of Champernowne. The main challenge in our proofs comes from the fact that the language of the representations of integers in these number systems is not context-free. The intricacy of this language makes it impossible to prove our results along classical lines. In particular, we use self-affine tiles that are defined in certain subrings of the ad\\'ele ring $\\mathbb{A}_\\mathbb{Q}$ and Fourier analysis in $\\mathbb{A}_\\mathbb{Q}$. With help of these tools we are able to reformulate our results as ...

  6. Towards Web Service-Based Educational Systems

    Science.gov (United States)

    Sampson, Demetrios G.

    2005-01-01

    The need for designing the next generation of web service-based educational systems with the ability of integrating components from different tools and platforms is now recognised as the major challenge in advanced learning technologies. In this paper, we discuss this issue and we present the conceptual design of such environment, referred to as…

  7. Designing Dexter-based cooperative hypermedia systems

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Madsen, Ole Lehrmann; Sloth, Lennard

    1993-01-01

    This paper discusses issues for the design of a Dexter-based cooperative hypermedia architecture and a specific system, DeVise Hypermedia (DHM), developed from this architecture. The Dexter Hypertext Reference Model [Hala90] was used as basis for designing the architecture. The Dexter model...

  8. Net-Based Task Management System

    Institute of Scientific and Technical Information of China (English)

    LIQiang; TIANLing; TONGBing-shu

    2004-01-01

    In net-based collaborative design environment, design resources become more and more varied and complex. Besides common information management systems, design resources can be organized in connection with design activities. A set of activities and resources linked by logic relations can form a task. A task has at least one objective and can be broken down into smaller ones. So a design project can be separated into many subtasks forming a hierarchical structure. Task Management System (TMS) is designed to break down these tasks and assign certain resources to its related task nodes. As a result of decomposition, all design resources and activities could be managed via this system. Based on this idea, we realized a TMS which manages collaborative resources in web environment.

  9. Keystroke Dynamics-Based Credential Hardening Systems

    Science.gov (United States)

    Bartlow, Nick; Cukic, Bojan

    abstract Keystroke dynamics are becoming a well-known method for strengthening username- and password-based credential sets. The familiarity and ease of use of these traditional authentication schemes combined with the increased trustworthiness associated with biometrics makes them prime candidates for application in many web-based scenarios. Our keystroke dynamics system uses Breiman’s random forests algorithm to classify keystroke input sequences as genuine or imposter. The system is capable of operating at various points on a traditional ROC curve depending on application-specific security needs. As a username/password authentication scheme, our approach decreases the system penetration rate associated with compromised passwords up to 99.15%. Beyond presenting results demonstrating the credential hardening effect of our scheme, we look into the notion that a user’s familiarity to components of a credential set can non-trivially impact error rates.

  10. 78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-03-26

    ... Industry Classification System Based Federal Wage System Wage Surveys AGENCY: U. S. Office of Personnel... is issuing a proposed rule that would update the 2007 North American Industry Classification System... North American Industry Classification System (NAICS) codes used in Federal Wage System (FWS)...

  11. Model based control of refrigeration systems

    Energy Technology Data Exchange (ETDEWEB)

    Sloth Larsen, L.F.

    2005-11-15

    The subject for this Ph.D. thesis is model based control of refrigeration systems. Model based control covers a variety of different types of controls, that incorporates mathematical models. In this thesis the main subject therefore has been restricted to deal with system optimizing control. The optimizing control is divided into two layers, where the system oriented top layers deals with set-point optimizing control and the lower layer deals with dynamical optimizing control in the subsystems. The thesis has two main contributions, i.e. a novel approach for set-point optimization and a novel approach for desynchronization based on dynamical optimization. The focus in the development of the proposed set-point optimizing control has been on deriving a simple and general method, that with ease can be applied on various compositions of the same class of systems, such as refrigeration systems. The method is based on a set of parameter depended static equations describing the considered process. By adapting the parameters to the given process, predict the steady state and computing a steady state gradient of the cost function, the process can be driven continuously towards zero gradient, i.e. the optimum (if the cost function is convex). The method furthermore deals with system constrains by introducing barrier functions, hereby the best possible performance taking the given constrains in to account can be obtained, e.g. under extreme operational conditions. The proposed method has been applied on a test refrigeration system, placed at Aalborg University, for minimization of the energy consumption. Here it was proved that by using general static parameter depended system equations it was possible drive the set-points close to the optimum and thus reduce the power consumption with up to 20%. In the dynamical optimizing layer the idea is to optimize the operation of the subsystem or the groupings of subsystems, that limits the obtainable system performance. In systems

  12. Kernel based collaborative recommender system for -purchasing

    Indian Academy of Sciences (India)

    M K Kavitha Devi; P Venkatesh

    2010-10-01

    Recommender system a new marketing strategy plays an important role particularly in an electronic commerce environment. Among the various recommender systems, collaborative recommender system (CRS) is widely used in a number of different applications such as recommending web pages, movies, tapes and items. CRS suffers from scalability, sparsity, and cold start problems. An intelligent integrated recommendation approach using radial basis function network (RBFN) and collaborative filtering (CF), based on Cover’s theorem, is proposed in order to overcome the traditional problems of CRS. The proposed system predicts the trend by considering both likes and dislikes of the active user. The empirical evaluation results reveal that the proposed approach is more effective than other existing approaches in terms of accuracy and relevance measure of recommendations.

  13. SQUID-based multichannel system for Magnetoencephalography

    CERN Document Server

    Rombetto, S; Vettoliere, A; Trebeschi, A; Rossi, R; Russo, M

    2013-01-01

    Here we present a multichannel system based on superconducting quantum interference devices (SQUIDs) for magnetoencephalography (MEG) measurements, developed and installed at Istituto di Cibernetica (ICIB) in Naples. This MEG system, consists of 163 full integrated SQUID magnetometers, 154 channels and 9 references, and has been designed to meet specifications concerning noise, dynamic range, slew rate and linearity through optimized design. The control electronics is located at room temperature and all the operations are performed inside a Magnetically Shielded Room (MSR). The system exhibits a magnetic white noise level of approximatively 5 fT/Hz1=2. This MEG system will be employed for both clinical and routine use. PACS numbers: 74.81.Fa, 85.25.Hv, 07.20.Mc, 85.25.Dq, 87.19.le, 87.85.Ng

  14. Statistical feature extraction based iris recognition system

    Indian Academy of Sciences (India)

    ATUL BANSAL; RAVINDER AGARWAL; R K SHARMA

    2016-05-01

    Iris recognition systems have been proposed by numerous researchers using different feature extraction techniques for accurate and reliable biometric authentication. In this paper, a statistical feature extraction technique based on correlation between adjacent pixels has been proposed and implemented. Hamming distance based metric has been used for matching. Performance of the proposed iris recognition system (IRS) has been measured by recording false acceptance rate (FAR) and false rejection rate (FRR) at differentthresholds in the distance metric. System performance has been evaluated by computing statistical features along two directions, namely, radial direction of circular iris region and angular direction extending from pupil tosclera. Experiments have also been conducted to study the effect of number of statistical parameters on FAR and FRR. Results obtained from the experiments based on different set of statistical features of iris images show thatthere is a significant improvement in equal error rate (EER) when number of statistical parameters for feature extraction is increased from three to six. Further, it has also been found that increasing radial/angular resolution,with normalization in place, improves EER for proposed iris recognition system

  15. Web based Measurement System for Solar Radiation

    Directory of Open Access Journals (Sweden)

    Shachi Awasthi

    2012-06-01

    Full Text Available We present in this paper, the principles of the measurement system for solar radiation, and our implementation using Web based data logging concept. The photocurrent produced by Silicon PN junction is used as a solar radiation transducer, to make it more viable we have used commercially available solar panels as our transducers. Using a silicon solar cell as sensor, a low cost solar radiometer can be constructed. The photocurrent produced by solar cell is electronically tailored to be measured and stored by our web based data acquisition and monitoring system. Measurement using real solar cell array gives a good measure of actual producible energy by solar arrays. Our portable instrument can be used in remote sites and substitutes the solar monitor and integrator, Current data of solar radiation can be monitored using Ethernet interface available in all PC, Laptops. We store the data into a secure digital card which can be retrieved to plot and analyse the data. We have developed system hardware and software based on ATmega32 AVR Microcontrollers and ENC28J60 Ethernet PHY and MAC network interface chip by Microchip. So the global irradiance data are obtained after correction using the instantaneous measurement of ambient temperature which allows us to calculate the junction temperature and consequently improve the precision of measurement of our data acquisition system.

  16. Web based Measurement System for Solar Radiation

    Directory of Open Access Journals (Sweden)

    Shachi Awasthi

    2012-06-01

    Full Text Available We present in this paper, the principles of themeasurement system for solar radiation, and ourimplementation using Web based data loggingconcept.The photocurrent produced by Silicon PNjunction is used as a solar radiation transducer, tomake it more viable we have used commerciallyavailable solar panels as our transducers. Using asilicon solar cell as sensor, a low cost solarradiometer can be constructed. The photocurrentproduced by solar cell is electronically tailored to bemeasured and stored by our web based dataacquisition and monitoring system. Measurementusing real solar cell array gives a good measure ofactual producible energy by solar arrays. Ourportable instrument can be used in remote sites andsubstitutes the solar monitor and integrator,Current data of solar radiation can be monitoredusing Ethernet interface available in all PC,Laptops. We store the data into a secure digital cardwhich can be retrieved to plot and analyse the data.We have developed system hardware andsoftware based on ATmega32 AVR Microcontrollersand ENC28J60 Ethernet PHY and MAC networkinterface chip by Microchip.So the global irradiance data are obtained aftercorrection using the instantaneous measurement ofambient temperature which allows us to calculatethe junction temperature and consequently improvethe precision of measurement of our dataacquisition system

  17. Vision based flight procedure stereo display system

    Science.gov (United States)

    Shen, Xiaoyun; Wan, Di; Ma, Lan; He, Yuncheng

    2008-03-01

    A virtual reality flight procedure vision system is introduced in this paper. The digital flight map database is established based on the Geographic Information System (GIS) and high definitions satellite remote sensing photos. The flight approaching area database is established through computer 3D modeling system and GIS. The area texture is generated from the remote sensing photos and aerial photographs in various level of detail. According to the flight approaching procedure, the flight navigation information is linked to the database. The flight approaching area vision can be dynamic displayed according to the designed flight procedure. The flight approaching area images are rendered in 2 channels, one for left eye images and the others for right eye images. Through the polarized stereoscopic projection system, the pilots and aircrew can get the vivid 3D vision of the flight destination approaching area. Take the use of this system in pilots preflight preparation procedure, the aircrew can get more vivid information along the flight destination approaching area. This system can improve the aviator's self-confidence before he carries out the flight mission, accordingly, the flight safety is improved. This system is also useful in validate the visual flight procedure design, and it helps to the flight procedure design.

  18. Prestandardisation Activities for Computer Based Safety Systems

    DEFF Research Database (Denmark)

    Taylor, J. R.; Bologna, S.; Ehrenberger, W.

    1981-01-01

    Questions of technical safety become more and more important. Due to the higher complexity of their functions computer based safety systems have special problems. Researchers, producers, licensing personnel and customers have met on a European basis to exchange knowledge and formulate positions....... The Commission of the european Community supports the work. Major topics comprise hardware configuration and self supervision, software design, verification and testing, documentation, system specification and concurrent processing. Preliminary results have been used for the draft of an IEC standard and for some...

  19. Emergency Broadcast System Based On GIS

    Science.gov (United States)

    Junfeng, Kang; Baoyu, Wang; Xueying, Jiang; Xiaosheng, Liu

    2017-02-01

    Nowadays, disaster occurs more and more frequently, which brings huge losses to the society. Presented a GIS based emergency broadcast system (GIS-EBS), to provide rapid, accurate information to the public, can reduce the people’s losses maximum. Different from the traditional radio data system (RDS), by adding broadcasting terminal control instruction on the FM signal, GIS-EBS extended the RDS protocol, which can control each radio terminal’s state. And through the extended RDS protocol, GIS-EBS can broadcast and release the emergency information to the right place and the people most in need in the shortest time.

  20. Extracting Answer in QA System: Learning Based

    Directory of Open Access Journals (Sweden)

    Megha Mishra

    2012-06-01

    Full Text Available Converting questions to effective queries is crucial to open-domain question answering systems. In this paper, we present a web-based unsupervised learning approach for transforming a given natural-language question to an effective query. The method involves querying a search engine for web passages that contain the answer to the question, extracting patterns that characterize fine-grained classification for answers. Independent evaluation on a set of questions shows that the proposed approach outperforms a naive keyword based approach.

  1. Practical vision based degraded text recognition system

    Science.gov (United States)

    Mohammad, Khader; Agaian, Sos; Saleh, Hani

    2011-02-01

    Rapid growth and progress in the medical, industrial, security and technology fields means more and more consideration for the use of camera based optical character recognition (OCR) Applying OCR to scanned documents is quite mature, and there are many commercial and research products available on this topic. These products achieve acceptable recognition accuracy and reasonable processing times especially with trained software, and constrained text characteristics. Even though the application space for OCR is huge, it is quite challenging to design a single system that is capable of performing automatic OCR for text embedded in an image irrespective of the application. Challenges for OCR systems include; images are taken under natural real world conditions, Surface curvature, text orientation, font, size, lighting conditions, and noise. These and many other conditions make it extremely difficult to achieve reasonable character recognition. Performance for conventional OCR systems drops dramatically as the degradation level of the text image quality increases. In this paper, a new recognition method is proposed to recognize solid or dotted line degraded characters. The degraded text string is localized and segmented using a new algorithm. The new method was implemented and tested using a development framework system that is capable of performing OCR on camera captured images. The framework allows parameter tuning of the image-processing algorithm based on a training set of camera-captured text images. Novel methods were used for enhancement, text localization and the segmentation algorithm which enables building a custom system that is capable of performing automatic OCR which can be used for different applications. The developed framework system includes: new image enhancement, filtering, and segmentation techniques which enabled higher recognition accuracies, faster processing time, and lower energy consumption, compared with the best state of the art published

  2. Hybrid Recommender System based on Autoencoders

    OpenAIRE

    Strub, Florian; Gaudel, Romaric; Mary, Jérémie

    2016-01-01

    International audience; A standard model for Recommender Systems is the Matrix Completion setting: given partially known matrix of ratings given by users (rows) to items (columns), infer the unknown ratings. In the last decades, few attempts where done to handle that objective with Neural Networks, but recently an architecture based on Autoencoders proved to be a promising approach. In current paper, we enhanced that architecture (i) by using a loss function adapted to input data with missing...

  3. STEP based Finish Machining CAPP system

    OpenAIRE

    A Arivazhagan; Mehta, NK; Jain, PK

    2012-01-01

    This research paper presents various methodologies developed in a STEP based Computer Aided Process Planning (CAPP) system named "Finish Machining – CAPP" (FM-CAPP). It is developed to generate automatic process plans for finish machining prismatic parts. It is designed in a modular fashion consisting of three main modules, namely (i) Feature Recognition module (FRM) (ii) Machining Planning Module (MPM) and (iii) Setup Planning Module (SPM). The FRM Module analyses the geometrical and topolog...

  4. CORBA-Based Discrete Event Simulation System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The CORBA technique is an integration of the object-oriented conception and distributed computing technique. It can make the application within distributed heterogeneous environments reusable, portable and interoperable.The architecture of CORBA-based discrete event simulation systems is presented and the interface of distributed simulation objects (DSO) is defined in this paper after the DSO is identified and the sysnchronization mechanism among DSO is discussed.``

  5. Ontology-Based Classification System Development Methodology

    OpenAIRE

    2015-01-01

    The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision ...

  6. PLC Based Automatic Multistoried Car Parking System

    OpenAIRE

    2014-01-01

    This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating twelve cars at a time. Availability of the space for parking is detecte...

  7. A Space Based Solar Power Satellite System

    Science.gov (United States)

    Engel, J. M.; Polling, D.; Ustamujic, F.; Yaldiz, R.; et al.

    2002-01-01

    (SPoTS) supplying other satellites with energy. SPoTS is due to be commercially viable and operative in 2020. of Technology designed the SPoTS during a full-time design period of six weeks as a third year final project. The team, organized according to the principles of systems engineering, first conducted a literature study on space wireless energy transfer to select the most suitable candidates for use on the SPoTS. After that, several different system concepts have been generated and evaluated, the most promising concept being worked out in greater detail. km altitude. Each SPoTS satellite has a 50m diameter inflatable solar collector that focuses all received sunlight. Then, the received sunlight is further redirected by means of four pointing mirrors toward four individual customer satellites. A market-analysis study showed, that providing power to geo-stationary communication satellites during their eclipse would be most beneficial. At arrival at geo-stationary orbit, the focused beam has expended to such an extent that its density equals one solar flux. This means that customer satellites can continue to use their regular solar arrays during their eclipse for power generation, resulting in a satellite battery mass reduction. the customer satellites in geo-stationary orbit, the transmitted energy beams needs to be pointed with very high accuracy. Computations showed that for this degree of accuracy, sensors are needed, which are not mainstream nowadays. Therefore further research must be conducted in this area in order to make these high-accuracy-pointing systems commercially attractive for use on the SPoTS satellites around 2020. Total 20-year system lifetime cost for 18 SPoT satellites are estimated at approximately USD 6 billion [FY2001]. In order to compete with traditional battery-based satellite power systems or possible ground based wireless power transfer systems the price per kWh for the customer must be significantly lower than the present one

  8. Cloth Modeling Based on Particle System

    Institute of Scientific and Technical Information of China (English)

    钟跃崎; 王善元

    2001-01-01

    A physical-based particle system is employed for cloth modeling supported by two basic algorithms, between which one is the construction of the internal and external forces acting on the particle system in terms of KES-F bending and shearing tests, and the other is the collision algorithm of which the collision detection is carried by means of bi-section of time step and the collision response is handled according to the empirical law for frictionless collision With these algorithms. the geometric state of parcles can be expressed as ordinary differential equationswhich is numerically solved by fourth order Runge- Kutta integration. Different draping figures of cotton fabric and wool fabric prove that such a particle system is suitable for 3D cloth modeling and simulation.

  9. Database systems for knowledge-based discovery.

    Science.gov (United States)

    Jagarlapudi, Sarma A R P; Kishan, K V Radha

    2009-01-01

    Several database systems have been developed to provide valuable information from the bench chemist to biologist, medical practitioner to pharmaceutical scientist in a structured format. The advent of information technology and computational power enhanced the ability to access large volumes of data in the form of a database where one could do compilation, searching, archiving, analysis, and finally knowledge derivation. Although, data are of variable types the tools used for database creation, searching and retrieval are similar. GVK BIO has been developing databases from publicly available scientific literature in specific areas like medicinal chemistry, clinical research, and mechanism-based toxicity so that the structured databases containing vast data could be used in several areas of research. These databases were classified as reference centric or compound centric depending on the way the database systems were designed. Integration of these databases with knowledge derivation tools would enhance the value of these systems toward better drug design and discovery.

  10. Optoelectronic date acquisition system based on FPGA

    Science.gov (United States)

    Li, Xin; Liu, Chunyang; Song, De; Tong, Zhiguo; Liu, Xiangqing

    2015-11-01

    An optoelectronic date acquisition system is designed based on FPGA. FPGA chip that is EP1C3T144C8 of Cyclone devices from Altera corporation is used as the centre of logic control, XTP2046 chip is used as A/D converter, host computer that communicates with the date acquisition system through RS-232 serial communication interface are used as display device and photo resistance is used as photo sensor. We use Verilog HDL to write logic control code about FPGA. It is proved that timing sequence is correct through the simulation of ModelSim. Test results indicate that this system meets the design requirement, has fast response and stable operation by actual hardware circuit test.

  11. Recommendation System Based on Fuzzy Cognitive Map

    Directory of Open Access Journals (Sweden)

    Wei Liu

    2014-07-01

    Full Text Available With the increase of data volume and visitor volume, the website faces great challenge in the environment of network. How to know the users’ requirements rapidly and effectively and recommend the required information to the user becomes the research direction of all websites. The researchers of recommendation system propose a series of recommendation system models and algorithms for the user. The common challenge faced by these algorithms is how to judge the user intention and recommend the relevant content by little user action. The paper proposes the user situation awareness and information recommendation system based on fuzzy clustering analysis and fuzzy cognitive maps, and verifies the validity of the algorithm by the application to recommendation site of academic thesis.

  12. An FPGA-Based People Detection System

    Directory of Open Access Journals (Sweden)

    James J. Clark

    2005-05-01

    Full Text Available This paper presents an FPGA-based system for detecting people from video. The system is designed to use JPEG-compressed frames from a network camera. Unlike previous approaches that use techniques such as background subtraction and motion detection, we use a machine-learning-based approach to train an accurate detector. We address the hardware design challenges involved in implementing such a detector, along with JPEG decompression, on an FPGA. We also present an algorithm that efficiently combines JPEG decompression with the detection process. This algorithm carries out the inverse DCT step of JPEG decompression only partially. Therefore, it is computationally more efficient and simpler to implement, and it takes up less space on the chip than the full inverse DCT algorithm. The system is demonstrated on an automated video surveillance application and the performance of both hardware and software implementations is analyzed. The results show that the system can detect people accurately at a rate of about 2.5 frames per second on a Virtex-II 2V1000 using a MicroBlaze processor running at 75 MHz, communicating with dedicated hardware over FSL links.

  13. A network-based dynamical ranking system

    CERN Document Server

    Motegi, Shun

    2012-01-01

    Ranking players or teams in sports is of practical interests. From the viewpoint of networks, a ranking system is equivalent a centrality measure for sports networks, whereby a directed link represents the result of a single game. Previously proposed network-based ranking systems are derived from static networks, i.e., aggregation of the results of games over time. However, the score (i.e., strength) of a player, for example, depends on time. Defeating a renowned player in the peak performance is intuitively more rewarding than defeating the same player in other periods. To account for this factor, we propose a dynamic variant of such a network-based ranking system and apply it to professional men's tennis data. Our ranking system, also interpreted as a centrality measure for directed temporal networks, has two parameters. One parameter represents the exponential decay rate of the past score, and the other parameter controls the effect of indirect wins on the score. We derive a set of linear online update equ...

  14. Cluster based Intrusion Detection System for Manets

    Directory of Open Access Journals (Sweden)

    Nisha Dang

    2012-07-01

    Full Text Available Manets are the ad hoc networks that are build on demand or instantly when some mobile nodes come in the mobility range of each other and decide to cooperate for data transfer and communication. Therefore there is no defined topology for Manets. They communicate in dynamic topology which continuously changes as nodes are not stable. Due to this lack of infrastructure and distributed nature they are more vulnerable for attacks and provide a good scope to malicious users to become part of the network. To prevent the security of mobile ad hoc networks many security measures are designed such as encryption algorithms, firewalls etc. But still there is some scope of malicious actions. So, Intrusion detection systems are proposed to detect any intruder in the network and its malicious activities. Cluster based intrusion detection system is also designed to restrict the intruders activities in clusters of mobile nodes. In clusters each node run some intrusion detection code to detect local as well as global intrusion. In this paper we have taken insight of intrusion detection systems and different attacks on Manet security. Then we proposed how overhead involved in cluster based intrusion detection system can be reduced.

  15. Cosmic emergy based ecological systems modelling

    Science.gov (United States)

    Chen, H.; Chen, G. Q.; Ji, X.

    2010-09-01

    Ecological systems modelling based on the unified biophysical measure of cosmic emergy in terms of embodied cosmic exergy is illustrated in this paper with ecological accounting, simulation and scenario analysis, by a case study for the regional socio-economic ecosystem associated with the municipality of Beijing. An urbanized regional ecosystem model with eight subsystems of natural support, agriculture, urban production, population, finance, land area, potential environmental impact, and culture is representatively presented in exergy circuit language with 12 state variables governing by corresponding ecodynamic equations, and 60 flows and auxiliary variables. To characterize the regional socio-economy as an ecosystem, a series of ecological indicators based on cosmic emergy are devised. For a systematic ecological account, cosmic exergy transformities are provided for various dimensions including climate flows, natural resources, industrial products, cultural products, population with educational hierarchy, and environmental emissions. For the urban ecosystem of Beijing in the period from 1990 to 2005, ecological accounting is carried out and characterized in full details. Taking 2000 as the starting point, systems modelling is realized to predict the urban evolution in a one hundred time horizon. For systems regulation, scenario analyses with essential policy-making implications are made to illustrate the long term systems effects of the expected water diversion and rise in energy price.

  16. Multithreshold Segmentation Based on Artificial Immune Systems

    Directory of Open Access Journals (Sweden)

    Erik Cuevas

    2012-01-01

    Full Text Available Bio-inspired computing has lately demonstrated its usefulness with remarkable contributions to shape detection, optimization, and classification in pattern recognition. Similarly, multithreshold selection has become a critical step for image analysis and computer vision sparking considerable efforts to design an optimal multi-threshold estimator. This paper presents an algorithm for multi-threshold segmentation which is based on the artificial immune systems(AIS technique, also known as theclonal selection algorithm (CSA. It follows the clonal selection principle (CSP from the human immune system which basically generates a response according to the relationship between antigens (Ag, that is, patterns to be recognized and antibodies (Ab, that is, possible solutions. In our approach, the 1D histogram of one image is approximated through a Gaussian mixture model whose parameters are calculated through CSA. Each Gaussian function represents a pixel class and therefore a thresholding point. Unlike the expectation-maximization (EM algorithm, the CSA-based method shows a fast convergence and a low sensitivity to initial conditions. Remarkably, it also improves complex time-consuming computations commonly required by gradient-based methods. Experimental evidence demonstrates a successful automatic multi-threshold selection based on CSA, comparing its performance to the aforementioned well-known algorithms.

  17. LCA of biomass-based energy systems

    DEFF Research Database (Denmark)

    Tonini, Davide; Astrup, Thomas Fruergaard

    2012-01-01

    supplied could be significantly reduced (from 68 to 17 Gg CO2-eq/PJ) by increased use of wind and residual biomass resources as well as by electrifying the transport sector. Energy crops for production of biofuels and the use of these biofuels for heavy terrestrial transportation were responsible for most......Decrease of fossil fuel consumption in the energy sector is an important step towards more sustainable energy production. Environmental impacts related to potential future energy systems in Denmark with high shares of wind and biomass energy were evaluated using life-cycle assessment (LCA). Based...... on the reference year 2008, energy scenarios for 2030 and 2050 were assessed. For 2050 three alternatives for supply of transport fuels were considered: (1) fossil fuels, (2) rapeseed based biodiesel, and (3) Fischer–Tropsch based biodiesel. Overall, the results showed that greenhouse gas emissions per PJ energy...

  18. Fuzzy Logic Based Power System Contingency Ranking

    Directory of Open Access Journals (Sweden)

    A. Y. Abdelaziz

    2013-02-01

    Full Text Available Voltage stability is a major concern in planning and operations of power systems. It is well known that voltage instability and collapse have led to major system failures. Modern transmission networks are more heavily loaded than ever before to meet the growing demand. One of the major consequences resulted from such a stressed system is voltage collapse or instability. This paper presents maximum loadability identification of a load bus in a power transmission network. In this study, Fast Voltage Stability Index (FVSI is utilized as the indicator of the maximum loadability termed as Qmax. In this technique, reactive power loading will be increased gradually at particular load bus until the FVSI reaches close to unity. Therefore, a critical value of FVSI was set as the maximum loadability point. This value ensures the system from entering voltage-collapse region. The main purpose in the maximum loadability assessment is to plan for the maximum allowable load value to avoid voltage collapse; which is important in power system planning risk assessment.The most important task in security analysis is the problem of identifying the critical contingencies from a large list of credible contingencies and ranks them according to their severity. The condition of voltage stability in a power system can be characterized by the use of voltage stability indices. This paper presents fuzzy approach for ranking the contingencies using composite-index based on parallel operated fuzzy inference engine. The Line Flow index (L.F and bus Voltage Magnitude (VM of the load buses are expressed in fuzzy set notation. Further, they are evaluated using Fuzzy rules to obtain overall Criticality Index. Contingencies are ranked based on decreasing order of Criticality Index and then provides the comparison of ranking obtained with FVSI method.

  19. Ultracapacitor-Based Uninterrupted Power Supply System

    Science.gov (United States)

    Eichenberg, Dennis J.

    2011-01-01

    The ultracapacitor-based uninterrupted power supply (UPS) system enhances system reliability; reduces life-of-system, maintenance, and downtime costs; and greatly reduces environmental impact when compared to conventional UPS energy storage systems. This design provides power when required and absorbs power when required to smooth the system load and also has excellent low-temperature performance. The UPS used during hardware tests at Glenn is an efficient, compact, maintenance-free, rack-mount, pure sine-wave inverter unit. The UPS provides a continuous output power up to 1,700 W with a surge rating of 1,870 W for up to one minute at a nominal output voltage of 115 VAC. The ultracapacitor energy storage system tested in conjunction with the UPS is rated at 5.8 F. This is a bank of ten symmetric ultracapacitor modules. Each module is actively balanced using a linear voltage balancing technique in which the cell-to-cell leakage is dependent upon the imbalance of the individual cells. The ultracapacitors are charged by a DC power supply, which can provide up to 300 VDC at 4 A. A constant-voltage, constant-current power supply was selected for this application. The long life of ultracapacitors greatly enhances system reliability, which is significant in critical applications such as medical power systems and space power systems. The energy storage system can usually last longer than the application, given its 20-year life span. This means that the ultracapacitors will probably never need to be replaced and disposed of, whereas batteries require frequent replacement and disposal. The charge-discharge efficiency of rechargeable batteries is approximately 50 percent, and after some hundreds of charges and discharges, they must be replaced. The charge-discharge efficiency of ultracapacitors exceeds 90 percent, and can accept more than a million charges and discharges. Thus, there is a significant energy savings through the efficiency improvement, and there is far less

  20. Commercialization plan laser-based decoating systems

    Energy Technology Data Exchange (ETDEWEB)

    Freiwald, J.; Freiwald, D.A.

    1998-01-01

    F2 Associates Inc. (F2) is a small, high-technology firm focused on developing and commercializing environmentally friendly laser ablation systems for industrial-rate removal of surface coatings from metals, concrete, and delicate substrates such as composites. F2 has a contract with the US Department of Energy Federal Energy Technology Center (FETC) to develop and test a laser-based technology for removing contaminated paint and other contaminants from concrete and metal surfaces. Task 4.1 in Phase 2 of the Statement of Work for this DOE contract requires that F2 ``document its plans for commercializing and marketing the stationary laser ablation system. This document shall include a discussion of prospects for commercial customers and partners and may require periodic update to reflect changing strategy. This document shall be submitted to the DOE for review.`` This report is being prepared and submitted in fulfillment of that requirement. This report describes the laser-based technology for cleaning and coatings removal, the types of laser-based systems that have been developed by F2 based on this technology, and the various markets that are emerging for this technology. F2`s commercialization and marketing plans are described, including how F2`s organization is structured to meet the needs of technology commercialization, F2`s strategy and marketing approach, and the necessary steps to receive certification for removing paint from aircraft and DOE certification for D and D applications. The future use of the equipment built for the DOE contract is also discussed.

  1. Development of Arduino based wireless control system

    Science.gov (United States)

    Sun, Zhuoxiong; Dyke, Shirley J.; Pena, Francisco; Wilbee, Alana

    2015-03-01

    Over the past few decades, considerable attention has been given to structural control systems to mitigate structural vibration under natural hazards such as earthquakes and extreme weather conditions. Traditional wired structural control systems often employ a large amount of cables for communication among sensors, controllers and actuators. In such systems, implementation of wired sensors is usually quite complicated and expensive, especially on large scale structures such as bridges and buildings. To reduce the laborious installation and maintenance cost, wireless control systems (WCSs) are considered as a novel approach for structural vibration control. In this work, a WCS is developed based on the open source Arduino platform. Low cost, low power wireless sensing and communication components are built on the Arduino platform. Structural control algorithms are embedded within the wireless sensor board for feedback control. The developed WCS is first validated through a series of tests. Next, numerical simulations are performed simulating wireless control of a 3-story shear structure equipped with a semi-active control device (MR damper). Finally, experimental studies are carried out implementing the WCS on the 3-story shear structure in the Intelligent Infrastructure Systems Lab (IISL). A hydraulic shake table is used to generate seismic ground motions. The control performance is evaluated with the impact of modeling uncertainties, measurement noises as well as time delay and data loss induced by the wireless network. The developed WCS is shown to be effective in controlling structural vibrations under several historical earthquake ground motions.

  2. Network video transmission system based on SOPC

    Science.gov (United States)

    Zhang, Zhengbing; Deng, Huiping; Xia, Zhenhua

    2008-03-01

    Video systems have been widely used in many fields such as conferences, public security, military affairs and medical treatment. With the rapid development of FPGA, SOPC has been paid great attentions in the area of image and video processing in recent years. A network video transmission system based on SOPC is proposed in this paper for the purpose of video acquisition, video encoding and network transmission. The hardware platform utilized to design the system is an SOPC board of model Altera's DE2, which includes an FPGA chip of model EP2C35F672C6, an Ethernet controller and a video I/O interface. An IP core, known as Nios II embedded processor, is used as the CPU of the system. In addition, a hardware module for format conversion of video data, and another module to realize Motion-JPEG have been designed with Verilog HDL. These two modules are attached to the Nios II processor as peripheral equipments through the Avalon bus. Simulation results show that these two modules work as expected. Uclinux including TCP/IP protocol as well as the driver of Ethernet controller is chosen as the embedded operating system and an application program scheme is proposed.

  3. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  4. Routing problems based on hils system platform

    Directory of Open Access Journals (Sweden)

    Andrzej Adamski

    2015-03-01

    Full Text Available Background: The logistic systems are very complex socio-technical systems. In this paper the proposal of application of the hierarchical multi-layers system platform HILS approach for the solution of the complex vehicle routing problems is presented. The interactive system functional structure was proposed which by intelligent dedicated inter-layers interactions enables the professional solutions of these practical problems. To illustrate these capabilities the complex example of the real-time VRP-SPD-TW routing problem was presented in which upper layers offers the context-related real-time updating network specifications that stimulates the adequate routing parameters and specifications updating for problem solution in optimization layer. At the bottom dispatching control layer the DISCON (Dispatching CONtrol method from public transport was adopted to logistics applications in which the actual routing is treated as obligatory reference schedule to be stabilized. The intelligence aspects are related among others to HILS based decomposition, context-related trade-offs between routing modifications and corrective dispatching control capabilities e.g. priority or route guidance actions. Methods: Decomposition of the vehicle routing problem for the HILS layers tasks creating the ILS system hierarchical structure. Dedicated solution method for the VRP-SPD-TW routing problem. The recognition of the control preferences structure by AHP-Entropy methods. DISCON and PIACON multi-criteria interacting control methods. Results: Original formulation and solution of the vehicle routing problem by system-wide approach with essential practical advantages: consistency, lack of redundancy, essential reduction of dimension, dedicated formulation, multi-criteria approach, exploration of the integration and intelligence features supported by the intelligent PIACON-DISCON methods control activities Conclusions: The presented proposal creates the professional

  5. Web-based Projects Evaluation Management System

    Directory of Open Access Journals (Sweden)

    S. Al-Zoubi

    2008-01-01

    Full Text Available This project designs a Web-based evaluation management system for the College of Arts and Sciences (CAS. Problem statement: The Msc students in College of Arts and Sciences (CAS in applied sciences had to take their final project as a project paper in order to fulfill the requirements of their programs and be able to graduate. The final project was evaluated in two parts; first part is representing 40% of the total mark and evaluated by evaluators. Second part was representing 60% of the total mark and evaluated by the student's supervisor. These evaluation were done manually. Both the evaluators and supervisors had to fill in the evaluation forms manually and submit them to the office. Approach: The design research methodology or sometimes called "improvement research" contained the major steps: Awareness the problem, suggestion, development, evaluation and conclusion. Results: Both evaluators and supervisors can fill in the evaluation forms through the Internet. Bring the advantage of saving time and resources over traditional paper and pencil scan sheet method. For enhancing the performance of current final project evaluation process in College of Arts and Sciences (CAS this study proposed a web based evaluation management system to replace the current paper forms used by the evaluators and supervisors. Conclusion: Implementing this system will enable the evaluation results to be entered, presume and retrieved anytime anywhere.

  6. Fuzzy Rule Base System for Software Classification

    Directory of Open Access Journals (Sweden)

    Adnan Shaout

    2013-07-01

    Full Text Available Given the central role that software development plays in the delivery and application of informationtechnology, managers have been focusing on process improvement in the software development area. Thisimprovement has increased the demand for software measures, or metrics to manage the process. Thismetrics provide a quantitative basis for the development and validation of models during the softwaredevelopment process. In this paper a fuzzy rule-based system will be developed to classify java applicationsusing object oriented metrics. The system will contain the following features:Automated method to extract the OO metrics from the source code,Default/base set of rules that can be easily configured via XML file so companies, developers, teamleaders,etc, can modify the set of rules according to their needs,Implementation of a framework so new metrics, fuzzy sets and fuzzy rules can be added or removeddepending on the needs of the end user,General classification of the software application and fine-grained classification of the java classesbased on OO metrics, andTwo interfaces are provided for the system: GUI and command.

  7. Biometric Authentication System based on Iris Patterns

    Directory of Open Access Journals (Sweden)

    G. Sathish

    2012-01-01

    Full Text Available In the present age of digital impersonation, biometrictechniques are being used increasingly to prevaricateagainst identity thefts. Iris recognition is a proven,accurate means to identify people. Iris is regarded as themost reliable biometric feature in terms of its uniquenessand robustness. The objective of this work is to present abiometric authentication system for high securityphysical access control based on iris pattern. Theproposed iris recognition with improvement in segmentation and matching stages using Hamming distance provides match for iris pattern if hamming distance is below 0.15. The CASIA IRIS image database of Chinese Academy of Sciences Institute of Automation is used and the system is implemented in MATLAB. The proposed approach found to report higher verification accuracy of 99.2%.

  8. Policy-based Softswitch System Management

    Institute of Scientific and Technical Information of China (English)

    LI Ya-bo; SU Sen; CHEN Jun-liang

    2004-01-01

    This paper presents the design and implementation of the policy management layer of the softswitch system, which is currently under development in our lab. The distinguish key feature of our policy management subsystem is that the Parlay policy management architecture and the specific technical requirements of softswitch system management are closely incorporated. In this way, not only network providers but also authorized 3rd party application providers and application developers can develop services and applications to manage the access and use of network resources on a per user or application basis to best support established business objectives. The material presented in this document is heavily based on the work of Parlay policy management and IETF policy framework working group.

  9. SAW based systems for mobile communications satellites

    Science.gov (United States)

    Peach, R. C.; Miller, N.; Lee, M.

    1993-01-01

    Modern mobile communications satellites, such as INMARSAT 3, EMS, and ARTEMIS, use advanced onboard processing to make efficient use of the available L-band spectrum. In all of these cases, high performance surface acoustic wave (SAW) devices are used. SAW filters can provide high selectivity (100-200 kHz transition widths), combined with flat amplitude and linear phase characteristics; their simple construction and radiation hardness also makes them especially suitable for space applications. An overview of the architectures used in the above systems, describing the technologies employed, and the use of bandwidth switchable SAW filtering (BSSF) is given. The tradeoffs to be considered when specifying a SAW based system are analyzed, using both theoretical and experimental data. Empirical rules for estimating SAW filter performance are given. Achievable performance is illustrated using data from the INMARSAT 3 engineering model (EM) processors.

  10. Performance of laser based optical imaging system

    Science.gov (United States)

    Shah, Dhrupesh S.; Banerjee, Arup; Vora, Anup; Biswas, Amiya; Patel, Naimesh; Kurulkar, Amit; Dutt, Ashutosh

    2016-05-01

    Day night imaging application requires high dynamic range optical imaging system to detect targets of interest covering mid-day (>32000 Lux)[1], and moonless night ( 1mLux)[1] under clear sky- (visibility of >10km, atmospheric loss of 500m, atmospheric loss of >15dB/Km) conditions. Major governing factors for development of such camera systems are (i) covert imaging with ability to identify the target, (ii) imaging irrespective to the scene background, (iii) reliable operation , (iv) imaging capabilities in inclement weather conditions, (v) resource requirement vs availability power & mass, (vi) real-time data processing, (vii) self-calibration, and (viii) cost. Identification of optimum spectral band of interest is most important to meet these requirements. Conventional detection systems sensing in MWIR and LWIR band has certain draw backs in terms of target detection capabilities, susceptibility to background and huge thermo-mechanical resource requirement. Alternatively, range gated imaging camera system sensing in NIR/SWIR spectrum has shown significant potential to detect wide dynamic range targets. ToF Camera configured in NIR band has certain advantages in terms of Focal Plane Assembly (FPA) development with large format detectors and thermo-mechanical resource requirement compared to SWIR band camera configuration. In past, ToF camera systems were successfully configured in NIR spectrum using silicon based Electron Multiplying CCD (EMCCD), Intensifier CCD (ICCD) along with Gating device and pulsed laser source having emission in between 800nm to 900nm. However, these systems have a very low dynamic range and not suitable for clear sky mid-day conditions. Recently silicon based scientific grade CMOS image sensors have shown significant improvement in terms of high NIR responsivity and available in bigger formats (5MP or more), adequate Full well capacity for day time imaging (>30Ke), very low readout noise (<2e) required for night imaging and higher frame

  11. Implementation of PLC Based Elevator Control System

    Directory of Open Access Journals (Sweden)

    Sandar Htay

    2014-03-01

    Full Text Available This paper describes programmable logic controller based elevator control system. An elevator is one of the important aspects in electronics control module in automotive application. Nowadays, Myanmar is a developing country and there is enormous increase in high-rise building in Myanmar. This paper mainly focuses on using programmable logic controller to control the circuit and building the elevator model. Hall Effect sensor is used for the elevator position. DC Motor is used to control the up and down movement of the elevator car. Push buttons are used to call the elevator car. The elevator position is described by using the display unit. In this paper, Auto Station Software ladder logic program is used for four floors control system

  12. Multipotenciostat System Based on Virtual Instrumentation

    Directory of Open Access Journals (Sweden)

    Arrieta-Almario Álvaro Angel

    2014-07-01

    Full Text Available To carry out this project an electronic multichannel system of electrochemical measurement or multipotenciostat was developed. It is based on the cyclic voltammetry measurement technique, controlled by a computer that monitors, by means of an electronic circuit, both the voltage generated from the Pc and supplied to an electrolytic cell, and the current that flows through the electrodes of it. To design the application software and the user interface, Virtual Instrumentation was used. On the other hand, to perform the communication between the multipotenciostat circuit and the designed software, the National Instruments NI9263 and NI9203 acquisition modules were used. The system was tested on a substance with a known REDOX property, as well as to discriminate and classify some samples of coffee.

  13. A fractal-based image encryption system

    KAUST Repository

    Abd-El-Hafiz, S. K.

    2014-12-01

    This study introduces a novel image encryption system based on diffusion and confusion processes in which the image information is hidden inside the complex details of fractal images. A simplified encryption technique is, first, presented using a single-fractal image and statistical analysis is performed. A general encryption system utilising multiple fractal images is, then, introduced to improve the performance and increase the encryption key up to hundreds of bits. This improvement is achieved through several parameters: feedback delay, multiplexing and independent horizontal or vertical shifts. The effect of each parameter is studied separately and, then, they are combined to illustrate their influence on the encryption quality. The encryption quality is evaluated using different analysis techniques such as correlation coefficients, differential attack measures, histogram distributions, key sensitivity analysis and the National Institute of Standards and Technology (NIST) statistical test suite. The obtained results show great potential compared to other techniques.

  14. Knowledge-based information systems in practice

    CERN Document Server

    Jain, Lakhmi; Watada, Junzo; Howlett, Robert

    2015-01-01

    This book contains innovative research from leading researchers who presented their work at the 17th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2013, held in Kitakyusha, Japan, in September 2013. The conference provided a competitive field of 236 contributors, from which 38 authors expanded their contributions and only 21 published. A plethora of techniques and innovative applications are represented within this volume. The chapters are organized using four themes. These topics include: data mining, knowledge management, advanced information processes and system modelling applications. Each topic contains multiple contributions and many offer case studies or innovative examples. Anyone that wants to work with information repositories or process knowledge should consider reading one or more chapters focused on their technique of choice. They may also benefit from reading other chapters to assess if an alternative technique represents a more suitable app...

  15. A Fortran-90 Based Multiprecision System

    Science.gov (United States)

    Bailey, David H.; Lasinski, T. A. (Technical Monitor)

    1994-01-01

    The author has developed a new version of his Fortran multiprecision computation system that is based on the Fortran-90 language. With this new approach, a translator program is not required - translation of Fortran code for multiprecision is accomplished by merely utilizing advanced features of Fortran-90, such as derived data types and operator extensions. This approach results in more reliable translation and also permits programmers of multiprecision applications to utilize the full power of the Fortran-90 language. Three multiprecision datatypes are supported in this system: multiprecision integer. real and complex. All the usual Fortran conventions for mixed mode operations are supported, and many of the Fortran intrinsics, such as SIN, EXP and MOD, are supported with multiprecision arguments. This paper also briefly describes an interesting application of this software, wherein new number-theoretic identities have been discovered by means of multiprecision computations.

  16. Kinect based physiotherapy system for home use

    Directory of Open Access Journals (Sweden)

    Haas Dominik

    2015-09-01

    Full Text Available In physiotherapy, rehabilitation outcome is majorly dependent on the patient continuing exercises at home. To support a continuous and correct execution of exercises composed by the physiotherapist it is important that the patient stays motivated. With the emergence of game consoles such as Nintendo Wii, Sony PlayStation or Microsoft Xbox360 that employ special controllers or camera based motion recognition as means of user input those technologies have also been found to be interesting for other real-life applications. We present a concept to employ the Microsoft Kinect system as means to support patients during physiotherapy exercises at home. The system is intended to allow a physiotherapist to compose an individual set of exercises and to control the correct execution of those exercises through tracking the patient’s motions.

  17. Cell-based bioassays in microfluidic systems

    Science.gov (United States)

    Itle, Laura J.; Zguris, Jeanna C.; Pishko, Michael V.

    2004-12-01

    The development of cell-based bioassays for high throughput drug screening or the sensing of biotoxins is contingent on the development of whole cell sensors for specific changes in intracellular conditions and the integration of those systems into sample delivery devices. Here we show the feasibility of using a 5-(and-6)-carboxy SNARF-1, acetoxymethyl ester, acetate, a fluorescent dye capable of responding to changes in intracellular pH, as a detection method for the bacterial endotoxin, lipopolysaccharide. We used photolithography to entrap cells with this dye within poly(ethylene) glyocol diacrylate hydrogels in microfluidic channels. After 18 hours of exposure to lipopolysaccharide, we were able to see visible changes in the fluorescent pattern. This work shows the feasibility of using whole cell based biosensors within microfluidic networks to detect cellular changes in response to exogenous agents.

  18. Simulation-based Manufacturing System Modeling

    Institute of Scientific and Technical Information of China (English)

    卫东; 金烨; 范秀敏; 严隽琪

    2003-01-01

    In recent years, computer simulation appears to be very advantageous technique for researching the resource-constrained manufacturing system. This paper presents an object-oriented simulation modeling method, which combines the merits of traditional methods such as IDEF0 and Petri Net. In this paper, a four-layer-one-angel hierarchical modeling framework based on OOP is defined. And the modeling description of these layers is expounded, such as: hybrid production control modeling and human resource dispatch modeling. To validate the modeling method, a case study of an auto-product line in a motor manufacturing company has been carried out.

  19. Language Based Techniques for Systems Biology

    DEFF Research Database (Denmark)

    Pilegaard, Henrik

    calculi have similarly been used for the study of bio-chemical reactive systems. In this dissertation it is argued that techniques rooted in the theory and practice of programming languages, language based techniques if you will, constitute a strong basis for the investigation of models of biological.......g., the effects of receptor defects or drug delivery mechanisms. The property of sequential realisability. which is closely related to the function of biochemical pathways, is addressed by a variant of traditional Data Flow Analysis (DFA). This so-called ‘Pathway Analysis’ computes safe approximations to the set...

  20. Optimization for manufacturing system based on Pheromone

    Directory of Open Access Journals (Sweden)

    Lei Wang

    2011-06-01

    Full Text Available A new optimization approach, called pheromone, which comes from the collective behavior of ant colonies for food foraging is proposed to optimize task allocation. These ants spread pheromone information and make global information available locally; thus, an ant agent only needs to observe its local environment in order to account for nonlocal concerns in its decisions. This approach has the capacity for task allocation model to automatically find efficient routing paths for processing orders and to reduce communication overhead, which exists in contract net protocol, in shop floor control system. An example confirms that a pheromone-based optimization approach has an excellent allocation performance in shop floor.

  1. Photopolymerization of Glycerin Triglycidyl Ether Based Systems

    Institute of Scientific and Technical Information of China (English)

    HUANG Biwu; CHEN Yiwang; DENG Qilan

    2008-01-01

    Photopolymerization process of glycerin triglycidyl ether based systems was studied by an FT-IR spectrometer.An increase in the rate of polymerization for glycerin triglycidyl ether was evident when 3,4-epoxycyclohexylmethyl-3',4'-epoxycyclohexanecarboxylate was added to it.Its copolymerization mechanism was confirmed by using DSC analysis.The effect of ethoxylated trimethyol propane triacrylate on the rate of polymerization for glycerin triglycidyl ether was also studied,and the formation of interpenetrating network tightly cross-link was proposed.

  2. Web-based Construction Information Management System

    Directory of Open Access Journals (Sweden)

    David Scott

    2012-11-01

    Full Text Available Centralised information systems that are accessible to all parties in a construction project are powerful tools in the quest to improve efficiency and to enhance the flow of information within the construction industry. This report points out the maturity of the necessary IT technology, the availability and the suitability of existing commercial products.Some of these products have been studied and analysed. An evaluation and selection process based on the functions offered in the products and their utility is presented. A survey of local construction personnel has been used to collect typical weighting data and performance criteria used in the evaluation process.

  3. Barcode based localization system in indoor environment

    Directory of Open Access Journals (Sweden)

    Ľubica Ilkovičová

    2014-12-01

    Full Text Available Nowadays, in the era of intelligent buildings, there is a need to create indoornavigation systems, what is steadily a challenge. QR (Quick Response codesprovide accurate localization also in indoor environment, where other navigationtechniques (e.g. GPS are not available. The paper deals with the issues of posi-tioning using QR codes, solved at the Department of Surveying, Faculty of CivilEngineering SUT in Bratislava. Operating principle of QR codes, description ofthe application for positioning in indoor environment based on OS Android forsmartphones are described.

  4. System Engineering for the NNSA Knowledge Base

    Science.gov (United States)

    Young, C.; Ballard, S.; Hipp, J.

    2006-05-01

    To improve ground-based nuclear explosion monitoring capability, GNEM R&E (Ground-based Nuclear Explosion Monitoring Research & Engineering) researchers at the national laboratories have collected an extensive set of raw data products. These raw data are used to develop higher level products (e.g. 2D and 3D travel time models) to better characterize the Earth at regional scales. The processed products and selected portions of the raw data are stored in an archiving and access system known as the NNSA (National Nuclear Security Administration) Knowledge Base (KB), which is engineered to meet the requirements of operational monitoring authorities. At its core, the KB is a data archive, and the effectiveness of the KB is ultimately determined by the quality of the data content, but access to that content is completely controlled by the information system in which that content is embedded. Developing this system has been the task of Sandia National Laboratories (SNL), and in this paper we discuss some of the significant challenges we have faced and the solutions we have engineered. One of the biggest system challenges with raw data has been integrating database content from the various sources to yield an overall KB product that is comprehensive, thorough and validated, yet minimizes the amount of disk storage required. Researchers at different facilities often use the same data to develop their products, and this redundancy must be removed in the delivered KB, ideally without requiring any additional effort on the part of the researchers. Further, related data content must be grouped together for KB user convenience. Initially SNL used whatever tools were already available for these tasks, and did the other tasks manually. The ever-growing volume of KB data to be merged, as well as a need for more control of merging utilities, led SNL to develop our own java software package, consisting of a low- level database utility library upon which we have built several

  5. INOVATION AND ANTREPRENEURIAL CREATIVITY BUSINESS DURING HENRY FORD

    Directory of Open Access Journals (Sweden)

    GHICAJANU MIHAELA

    2015-03-01

    Full Text Available In this paper I presented the innovation and entrepeneurial creativity as a basis in the process of business redesign. I chose as a case study the the Ford brand products, because it is considered that Henry Ford is one of the greatest innovators and entrepreneurs of all time and I decided to present and to analyze these things. The first part of the paper will include theoretical approaches on the innovation and creativity business concepts and premises, and then I showed the ways in which four types of economic innovation under the leadership of Henry Ford (innovation in product, in process, market and organizational were achieved, with the purpose to recognize them in other companies, nowadays .

  6. Cohesion Based Personalized Community Recommendation System

    Directory of Open Access Journals (Sweden)

    Md Mamunur Rashid

    2016-08-01

    Full Text Available Our life is totally engaged by the progressive growth of online social networking. Because, millions of users are interconnecting with each other using different social media sites like Facebook, Twitter, LinkedIn, Google+, Pinterest, Instagram etc. Most of the social sites like Facebook, Google+ allow users to join different groups or communities where people can share their common interests and express opinions around a common cause, problem or activity. However, an information overloading issue has disturbed users as thousands of communities or groups are creating each day. To resolve this problem, we have presented a community or group recommendation system centered on cohesion where cohesion represents high degree of connectedness among users in social network. In this paper, we emphasis on suggesting useful communities (or groups in term of Facebook that users personally attracted in to join; reducing the effort to find useful information based on cohesion. Our projected framework contains of the steps like: extracting sub-network from a social networking site (SNS, computing the impact of amity(both real-life or social and SNS connected, measuring user proclivity factor, calculating threshold from existing communities or groups of a user and lastly recommending community or group based on derived threshold. In result analysis part, we consider the precision-recall values by discarding community or group one at a time from the list of communities or groups of a certain user and checking whether the removed community or group is recommended by our proposed system. We have evaluated our system with 20 users and found 76% F1 accuracy measure.

  7. Embedded Based Conveyance Authentication and Notification System

    Directory of Open Access Journals (Sweden)

    A. Umamakeswari

    2013-02-01

    Full Text Available Amidst the rapid increase in population and urbanization, the use of automobiles is increasing rapidly. Though there are improved safety and security features with advancement in technology, there are no vehicle regulatory systems that provide automation in vehicle monitoring and act violations. The main objective of the work is to have a centralized server based monitoring of vehicles with an advanced security system realized in two levels of verification (password and RFID card i.e. driving license for engine ignition. In addition to this, the centralized server maintains two separate databases i.e. one for the vehicle and another for the person who rides it. A unique id is allotted for the vehicle and RFID card (smart card driving license can be used to identify the object. The unique identifiers linked to the respective person’s bank account debits the penalty/toll fare when the vehicle passes by toll gates/check posts. This provides a way for reducing any possibility of corruption in motor vehicles section as the penalty will be deducted straightforwardly from the person's account by an automated system.

  8. ERF Based Precision Linear Drive System

    Science.gov (United States)

    Tönshoff, Hans Kurt; Stegmann, Axel

    The design of clutches using electrorheological fluids (ERF) or magnetorheological suspensions (MRS) offers a new approach to precision linear drive systems based on the ‘inch-worm’ principle. This principle needs two clutches or controllable clamps and one (or more) elements to vary the distance between these clamps. To perform a caterpillar-like motion the actuators are controlled in a cyclic mode. This paper presents design elements, system structure and first results of motion performance of a prototype drive system. The presented linear drive combines the high resolution of piezo actuators, the unlimited travel of the ‘inch-worm’ principle and the clutch effect of ERF without a substantial mechanical excitation. The motion of the two clamps is controlled to move a stage in point to point mode or to follow a given velocity profile. Using two piezo actuators the stage can move continuously. Pre-loaded piezo actuators control the distances between the two clamps and the central slide. Each ERF clamp is designed as a set of thin parallel steel plate electrodes which interlock with a set of ground plates. Drive force limits are given by the maximum yield force of the clamps as well as by the relation of the actuator expansion and the ERF/MRS shear stiffness in “solid” mode.

  9. 49 CFR 234.275 - Processor-based systems.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS Maintenance, Inspection, and Testing Requirements for Processor-Based Systems § 234.275 Processor-based systems. (a... 49 Transportation 4 2010-10-01 2010-10-01 false Processor-based systems. 234.275 Section...

  10. Mammalian Cell-Based Sensor System

    Science.gov (United States)

    Banerjee, Pratik; Franz, Briana; Bhunia, Arun K.

    Use of living cells or cellular components in biosensors is receiving increased attention and opens a whole new area of functional diagnostics. The term "mammalian cell-based biosensor" is designated to biosensors utilizing mammalian cells as the biorecognition element. Cell-based assays, such as high-throughput screening (HTS) or cytotoxicity testing, have already emerged as dependable and promising approaches to measure the functionality or toxicity of a compound (in case of HTS); or to probe the presence of pathogenic or toxigenic entities in clinical, environmental, or food samples. External stimuli or changes in cellular microenvironment sometimes perturb the "normal" physiological activities of mammalian cells, thus allowing CBBs to screen, monitor, and measure the analyte-induced changes. The advantage of CBBs is that they can report the presence or absence of active components, such as live pathogens or active toxins. In some cases, mammalian cells or plasma membranes are used as electrical capacitors and cell-cell and cell-substrate contact is measured via conductivity or electrical impedance. In addition, cytopathogenicity or cytotoxicity induced by pathogens or toxins resulting in apoptosis or necrosis could be measured via optical devices using fluorescence or luminescence. This chapter focuses mainly on the type and applications of different mammalian cell-based sensor systems.

  11. [Transforming health systems based on primary care].

    Science.gov (United States)

    Durán-Arenas, Luis; Salinas-Escudero, Guillermo; Granados-García, Víctor; Martínez-Valverde, Silvia

    2012-01-01

    Access to health services is a social basic determinant of health in Mexico unlike what happens in developed countries. The demand for health services is focused on primary care, but the design meets only the supply of hospital care services. So it generates a dissonance between the needs and the effective design of health services. In addition, the term affiliation refers to population contributing or in the recruitment process, that has been counted as members of these social security institutions (SS) and Popular Insurance (SP). In the case of Instituto Mexicano del Seguro Social (IMSS) three of four contributors are in contact with health services; while in the SP, this indicator does not exist. Moreover, the access gap between health services is found in the health care packages so that members of the SS and SP do not have same type of coverage. The question is: which model of health care system want the Mexicans? Primary care represents the first choice for increasing the health systems performance, as well as to fulfill their function of social protection: universal access and coverage based on needs, regardless whether it is a public or private health insurance. A central aspect for development of this component is the definition of the first contact with the health system through the creation of a primary health care team, led by a general practitioner as the responsible of a multidisciplinary health team. The process addresses the concepts of primary care nursing, consumption of inputs (mainly medical drugs), maintenance and general services. Adopting a comprehensive strategy that will benefit all Mexicans equally and without discrimination, this primary care system could be financed with a total operating cost of approximately $ 22,809 million by year.

  12. Elearning Systems Based on the Semantic Web

    Directory of Open Access Journals (Sweden)

    George Nicola Sammour

    2006-06-01

    Full Text Available ELearning has been identified as a strategic resource that can be utilized as an increasing variety of venues such as homes, workplaces, and traditional institutions of learning, education, and training. ELearning systems are becoming technologically sophisticated and complicated, with regard to training management or course management. Their use does not always match well with traditional modes of teaching and learning and much care needs to be taken when considering the use of ELearning in educational institutions. The use of semantic web in eLearning has been explored with regard to two application areas: 1 software that supports teachers in performing their tasks in flexible online educational settings, and 2 software that interpret the structure of distributed, self organized, and self-directed ELearning and web-based learning. The resulting system will be used by learners to perform the tasks they are asked to do more effectively in the context of gaining knowledge out of the material presented by teachers. These two application areas and related tasks require a semantic representation of educational entities and pedagogical material, specifically the structure and the techniques of the teaching-learning process. In most eLearning systems users are able to manage and reuse learning contents according to their needs without any access problems. However the quality of learning is not guaranteed. This paper emphasizes the integration of the semantic web technologies with Elearning systems, taking into consideration the standards and reusable Learning Objects LO. The advantage to improve the descriptions of content, context and structure of the learning materials and the benefits of providing access to the learning materials are also presented.

  13. A marine direction finding system based on global positioning system

    Science.gov (United States)

    Dǎnişor, Alin; Izet-Ünsalan, Kunsel-Özel; Ünsalan, Deniz; Tamaş, Razvan; Dǎnişor, Cosmin

    2015-02-01

    Direction finding and attitude determination is of utmost importance for marine, aerial, spatial and land-based navigation [1], as well as control of vehicles, in surveying and in target acquisition of tracking radars. These problems can be solved using dedicated sensors commonly named as compasses and rate gyros. Unfortunately, the classical means of attitude determination both by magnetic and gyrocompasses become unusable at extreme latitudes. Furthermore, gyrocompasses inherently yield erroneous results on high speed craft. Three-axis attitude of a vehicle can be determined using a GPS receiver with multiple antennas, by measuring carrier phases [2], signal strength [3], or integrated INS/GPS systems [4]. This paper proposes a new method of attitude determination using two low-cost GPS receivers.

  14. Toward Sensor-Based Context Aware Systems

    Directory of Open Access Journals (Sweden)

    Kouhei Takada

    2012-01-01

    Full Text Available This paper proposes a methodology for sensor data interpretation that can combine sensor outputs with contexts represented as sets of annotated business rules. Sensor readings are interpreted to generate events labeled with the appropriate type and level of uncertainty. Then, the appropriate context is selected. Reconciliation of different uncertainty types is achieved by a simple technique that moves uncertainty from events to business rules by generating combs of standard Boolean predicates. Finally, context rules are evaluated together with the events to take a decision. The feasibility of our idea is demonstrated via a case study where a context-reasoning engine has been connected to simulated heartbeat sensors using prerecorded experimental data. We use sensor outputs to identify the proper context of operation of a system and trigger decision-making based on context information.

  15. DNA-Based Enzyme Reactors and Systems

    Directory of Open Access Journals (Sweden)

    Veikko Linko

    2016-07-01

    Full Text Available During recent years, the possibility to create custom biocompatible nanoshapes using DNA as a building material has rapidly emerged. Further, these rationally designed DNA structures could be exploited in positioning pivotal molecules, such as enzymes, with nanometer-level precision. This feature could be used in the fabrication of artificial biochemical machinery that is able to mimic the complex reactions found in living cells. Currently, DNA-enzyme hybrids can be used to control (multi-enzyme cascade reactions and to regulate the enzyme functions and the reaction pathways. Moreover, sophisticated DNA structures can be utilized in encapsulating active enzymes and delivering the molecular cargo into cells. In this review, we focus on the latest enzyme systems based on novel DNA nanostructures: enzyme reactors, regulatory devices and carriers that can find uses in various biotechnological and nanomedical applications.

  16. Power Line Communication Based Home Security System

    Directory of Open Access Journals (Sweden)

    Sankalp N. Gujar

    2013-11-01

    Full Text Available The aim of this paper is to demonstrate the use of Power line (A.C mains based security system i.e. developing the hardware for a microcontroller module that is to be interfaced to sensors which will detect breaches in security and developing a power line communication modem for sending/receiving data from the microcontroller modules over the power line. As soon as any one of the sensors in an establishment is triggered, the microcontroller will send data to the power line communication modem over UART. The modem will then convert the incoming data into a packet, modulate it using ASK and transmit it over the power line through the coupling circuit. The modem at the security cabin will demodulate this packet and send it to the microcontroller over UART. The microcontroller then activates the alarm and displays the location and nature of the breach on the display

  17. Mobile based optical form evaluation system

    Directory of Open Access Journals (Sweden)

    Asım Sinan YÜKSEL

    2016-05-01

    Full Text Available Optical forms that contain multiple-choice answers are widely used both for electing students and evaluating student achievements in education systems in our country and worldwide. Optical forms are evaluated by employing optical mark recognition techniques through optical readers. High cost of these machines, limited access to them, long waiting time for evaluation results make the process hard for educationists working in cities or countries. In this study, a mobile application was developed for the educationists who own mobile phones or tablets for the purpose of evaluating students' answer sheets quickly and independent of location and optical readers. Optical form recognition, reading and evaluation processes are done on the image of student's answer sheet that is taken with the mobile phone or tablet of educationist. The Android based mobile application that we developed has a user-friendly interface, high success rate and is the first of our knowledge application that operates on mobile platforms in this field.

  18. PLC Based Automatic Multistoried Car Parking System

    Directory of Open Access Journals (Sweden)

    Swanand S .Vaze

    2014-12-01

    Full Text Available This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating twelve cars at a time. Availability of the space for parking is detected by optical proximity sensor which is placed on the pallet. A motor controlled elevator is used to lift the cars. Elevator status is indicated by LED which is placed on ground floor. Controlling of the platforms and checking the vacancies is done by PLC. For unparking of car, keyboard is interfaced with the model for selection of required platform. Automation is done to reduce requirement of space and also to reduce human errors, which in-turn results in highest security and greatest flexibility. Due to these advantages, this system can be used in hotels, railway stations, airports where crowding of car is more.

  19. Semantically based clinical TCM telemedicine systems

    CERN Document Server

    Wong, Allan K Y; Lin, Wilfred W K; Dillon, Tharam S; Chang, Elizabeth J

    2015-01-01

    Recent years have seen the development of two significant trends namely: the adoption of some Traditional Chinese Medicine Practices into mainstream Allopathic Western Medicine and the advent of the internet and broad band networks leading to an increased interest in the use of Telemedicine to deliver medical services. In this book, we see the convergence of these two trends leading to a semantically-based TCM Telemedicine system that utilizes an ontology to provide sharable knowledge in the TCM realm to achieve this. The underpinning research required the development of a three-layer architecture and an Ontology of the TCM knowledge. As TCM knowledge like all medical knowledge is not frozen in time it was important to develop an approach that would allow evolution of the Ontology when new evidence became available. In order for the system to be practically grounded it was important to work with an industry partner PuraPharm Group/HerbMiners Informatics Limited. This partnership was initiated through Professo...

  20. COMPUTER-BASED REASONING SYSTEMS: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    CIPRIAN CUCU

    2012-12-01

    Full Text Available Argumentation is nowadays seen both as skill that people use in various aspects of their lives, as well as an educational technique that can support the transfer or creation of knowledge thus aiding in the development of other skills (e.g. Communication, critical thinking or attitudes. However, teaching argumentation and teaching with argumentation is still a rare practice, mostly due to the lack of available resources such as time or expert human tutors that are specialized in argumentation. Intelligent Computer Systems (i.e. Systems that implement an inner representation of particular knowledge and try to emulate the behavior of humans could allow more people to understand the purpose, techniques and benefits of argumentation. The proposed paper investigates the state of the art concepts of computer-based argumentation used in education and tries to develop a conceptual map, showing benefits, limitation and relations between various concepts focusing on the duality “learning to argue – arguing to learn”.

  1. LU factorization for accelerator-based systems

    KAUST Repository

    Agullo, Emmanuel

    2011-12-01

    Multicore architectures enhanced with multiple GPUs are likely to become mainstream High Performance Computing (HPC) platforms in a near future. In this paper, we present the design and implementation of an LU factorization using tile algorithm that can fully exploit the potential of such platforms in spite of their complexity. We use a methodology derived from previous work on Cholesky and QR factorizations. Our contributions essentially consist of providing new CPU/GPU hybrid LU kernels, studying the impact on performance of the looking variants as well as the storage layout in presence of pivoting, tuning the kernels for two different machines composed of multiple recent NVIDIA Tesla S1070 (four GPUs total) and Fermi-based S2050 GPUs (three GPUs total), respectively. The hybrid tile LU asymptotically achieves 1 Tflop/s in single precision on both hardwares. The performance in double precision arithmetic reaches 500 Gflop/s on the Fermi-based system, twice faster than the old GPU generation of Tesla S1070. We also discuss the impact of the number of tiles on the numerical stability. We show that the numerical results of the tile LU factorization will be accurate enough for most applications as long as the computations are performed in double precision arithmetic. © 2011 IEEE.

  2. Nanotechnology-based drug delivery systems

    Directory of Open Access Journals (Sweden)

    Singh Baljit

    2007-12-01

    Full Text Available Abstract Nanoparticles hold tremendous potential as an effective drug delivery system. In this review we discussed recent developments in nanotechnology for drug delivery. To overcome the problems of gene and drug delivery, nanotechnology has gained interest in recent years. Nanosystems with different compositions and biological properties have been extensively investigated for drug and gene delivery applications. To achieve efficient drug delivery it is important to understand the interactions of nanomaterials with the biological environment, targeting cell-surface receptors, drug release, multiple drug administration, stability of therapeutic agents and molecular mechanisms of cell signalling involved in pathobiology of the disease under consideration. Several anti-cancer drugs including paclitaxel, doxorubicin, 5-fluorouracil and dexamethasone have been successfully formulated using nanomaterials. Quantom dots, chitosan, Polylactic/glycolic acid (PLGA and PLGA-based nanoparticles have also been used for in vitro RNAi delivery. Brain cancer is one of the most difficult malignancies to detect and treat mainly because of the difficulty in getting imaging and therapeutic agents past the blood-brain barrier and into the brain. Anti-cancer drugs such as loperamide and doxorubicin bound to nanomaterials have been shown to cross the intact blood-brain barrier and released at therapeutic concentrations in the brain. The use of nanomaterials including peptide-based nanotubes to target the vascular endothelial growth factor (VEGF receptor and cell adhesion molecules like integrins, cadherins and selectins, is a new approach to control disease progression.

  3. A simplified holography based superresolution system

    Science.gov (United States)

    Mudassar, Asloob Ahmad

    2015-12-01

    In this paper we are proposing a simple idea based on holography to achieve superresolution. The object is illuminated by three fibers which maintain the mutual coherence between the light waves. The object in-plane rotation along with fiber-based illumination is used to achieve superresolution. The object in a 4f optical system is illuminated by an on-axis fiber to make the central part of the object's spectrum to the pass through the limiting square-aperture placed at the Fourier plane and the corresponding hologram of the image is recorded at the image plane. The on-axis fiber is switched off and the two off axis fibers (one positioned on the vertical axis and the other positioned on diagonal) are switched on one by one for each orientation of the object position. Four orientations of object in-plane rotation are used differing in angle by 90°. This will allow the recording of eight holographic images in addition to the one recorded with on-axis fiber. The three fibers are at the vertices of a right angled isosceles triangle and are aligned toward the centre of the lens following the fiber plane to generate plane waves for object illumination. The nine holographic images are processed for construction of object's original spectrum, the inverse of which gives the super-resolved image of the original object. Mathematical modeling and simulations are reported.

  4. Preference Based Personalized News Recommender System

    Directory of Open Access Journals (Sweden)

    Mansi Sood

    2014-06-01

    Full Text Available News reading has changed from the traditional model of hardcopy newspapers to online news access. Thousands of news sources are available on internet each having millions of articles to choose from, leaving users tangled to find out a relevant article that matches their interests and liking. Recommender Systems can be used as a solution to this information overload problem by identifying the interest areas of a user by creating user profiles, maintaining those profiles to keep accommodating changing user interests and presenting a set of recent news articles formed as recommendations based on those user profiles. This paper presents an algorithm, which requests one time input from users (during the signup about their preference of news categories (like Sports, Entertainment etc., which they would like to subscribe and creates a personalized profile for each user. Subsequently, it requests an optional feedback on the recommended articles, to intelligently update user profiles, and recommend relevant articles to them, based on their changing interests. The paper also presents a simulation of the proposed algorithm on various use cases to depict the correctness and robustness of the algorithm. Also, it gives a brief idea about implementation details and challenges associated with the algorithm.

  5. Seca Coal-Based Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Alinger

    2008-05-31

    This report summarizes the progress made during the August 1, 2006 - May 31, 2008 award period under Cooperative Agreement DE-FC26-05NT42614 for the U. S. Department of Energy/National Energy Technology Laboratory (USDOE/NETL) entitled 'SECA Coal Based Systems'. The initial overall objective of this program was to design, develop, and demonstrate multi-MW integrated gasification fuel cell (IGFC) power plants with >50% overall efficiency from coal (HHV) to AC power. The focus of the program was to develop low-cost, high performance, modular solid oxide fuel cell (SOFC) technology to support coal gas IGFC power systems. After a detailed GE internal review of the SOFC technology, the program was de-scoped at GE's request. The primary objective of this program was then focused on developing a performance degradation mitigation path for high performing, cost-effective solid oxide fuel cells (SOFCs). There were two initial major objectives in this program. These were: (1) Develop and optimize a design of a >100 MWe integrated gasification fuel cell (IGFC) power plant; (2) Resolve identified barrier issues concerning the long-term economic performance of SOFC. The program focused on designing and cost estimating the IGFC system and resolving technical and economic barrier issues relating to SOFC. In doing so, manufacturing options for SOFC cells were evaluated, options for constructing stacks based upon various cell configurations identified, and key performance characteristics were identified. Key factors affecting SOFC performance degradation for cells in contact with metallic interconnects were be studied and a fundamental understanding of associated mechanisms was developed using a fixed materials set. Experiments and modeling were carried out to identify key processes/steps affecting cell performance degradation under SOFC operating conditions. Interfacial microstructural and elemental changes were characterized, and their relationships to observed

  6. Computer Based Information Systems and the Middle Manager.

    Science.gov (United States)

    Why do some computer based information systems succeed while others fail. It concludes with eleven recommended areas that middle management must...understand in order to effectively use computer based information systems . (Modified author abstract)

  7. Design Scheme of Remote Monitoring System Based on Qt

    Directory of Open Access Journals (Sweden)

    Xu Dawei

    2015-01-01

    Full Text Available This paper introduces a design scheme of remote monitoring system based on Qt, the scheme of remote monitoring system based on S3C2410 and Qt, with the aid of cross platform development tools Qt and powerful ARM platform design and implementation. The development of remote video surveillance system based on embedded terminal has practical significance and value.

  8. Campus Access Control System RFID Based

    Directory of Open Access Journals (Sweden)

    Mr. SANTHOSH S

    2012-06-01

    Full Text Available Radio frequency identification (RFID technology has helped many organizations to reduce cost. Nevertheless, there are challenges and issues associated with RFID adoption. The most common internal challenge for many organizations is justifying the investment and modification of processes. The focus of this project is to show the business value of RFID technology and its applications. The important issue is the security level of the whole campus because it needs to be carefully differentiated. Dormitories and special research laboratories should benefit from higher levels of security than any other campuses. The key to the problem is represented by the new Radio Frequency Identification (RFID which can support contactless cards with memory. The most important feature of the proposed system is the updating of access permission level at any time for the user based on the availability of that user. The data transfer from the reader to the database was done using wireless communication (RF communication. To achieve this here RF transmitter and the RF receiver is used. The data which is read by the reader is sent to the microcontroller. Then from the controller we can transfer the data to the database by using the UART module (serial communication which is inbuilt in the microcontroller through RF transmitter. RF receiver of the same frequency at the receiver end receives and then stores the data in the database. RF transmitter and Receiver – frequency for transmitting and receiving the data depends on the user as per the requirement for the application and it is based on the range of distance. For the data encoding and decoding process HCS-101 protocol is used.

  9. Event-based modularization of reactive systems

    NARCIS (Netherlands)

    Malakuti, Somayeh; Aksit, Mehmet

    2014-01-01

    There is a large number of complex software systems that have reactive behavior. As for any other software system, reactive systems are subject to evolution demands. This paper defines a set requirements that must be fulfilled so that reuse of reactive software systems can be increased. Detailed ana

  10. Clinical applications of plasma based electrosurgical systems

    Science.gov (United States)

    Woloszko, Jean; Endler, Ashley; Ryan, Thomas P.; Stalder, Kenneth R.

    2013-02-01

    Over the past 18 years, several electrosurgical systems generating a low temperature plasma in an aqueous conductive solution have been commercialized for various clinical applications and have been used in over 10 million patients to date. The most popular utilizations are in arthroscopic surgery, otorhinolaryngology surgery, spine and neurosurgery, urology and wound care. These devices can be configured to bring saline to the tip and to have concomitant aspiration to remove by-products and excess fluid. By tuning the electrode geometry, waveform and fluid dynamic at the tip of the devices, tissue resection and thermal effects can be adjusted individually. This allows one to design products that can operate as precise tissue dissectors for treatment of articular cartilage or debridement of chronic wounds, as well as global tissue debulking devices providing sufficient concomitant hemostasis for applications like tonsillectomies. Effects of these plasma based electrosurgical devices on cellular biology, healing response and nociceptive receptors has also been studied in various models. This talk will include a review of the clinical applications, with product descriptions, results and introductory review of some of the research on the biological effects of these devices.

  11. Flood alert system based on bayesian techniques

    Science.gov (United States)

    Gulliver, Z.; Herrero, J.; Viesca, C.; Polo, M. J.

    2012-04-01

    analyzed, where the water level, with time lags of 12 hours related to the concentration time, was found to be most significant. In short, the fits to the different distribution functions of extremes were unsatisfactory, as the data were of poor quality and scant. This problem with data is not unusual in small and medium sized Mediterranean basins and becomes the real challenge to any prediction system based only on statistical methods. The aim of the resulting tool is to develop and maintain a numerical short-range weather forecasting system for operational use by the regional water management entities. The development of this tool is also corroborated by recent survey results, which identify the need to develop site specific models for water management in these Mediterranean regions, so prone to flash flood events (NOVIWAM, 2011 Novel Integrated Water Management systems for Southern European Regions, Seventh Framework Programme, EC, 2010-2013).

  12. Review of Recommender Systems Algorithms Utilized in Social Networks based e-Learning Systems & Neutrosophic System

    Directory of Open Access Journals (Sweden)

    A. A. Salama

    2015-03-01

    Full Text Available In this paper, we present a review of different recommender system algorithms that are utilized in social networks based e-Learning systems. Future research will include our proposed our e-Learning system that utilizes Recommender System and Social Network. Since the world is full of indeterminacy, the neutrosophics found their place into contemporary research. The fundamental concepts of neutrosophic set, introduced by Smarandache in [21, 22, 23] and Salama et al. in [24-66].The purpose of this paper is to utilize a neutrosophic set to analyze social networks data conducted through learning activities.

  13. Chance-Constrained System of Systems Based Operation of Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Kargarian, Amin; Fu, Yong; Wu, Hongyu

    2016-09-01

    In this paper, a chance-constrained system of systems (SoS) based decision-making approach is presented for stochastic scheduling of power systems encompassing active distribution grids. Based on the concept of SoS, the independent system operator (ISO) and distribution companies (DISCOs) are modeled as self-governing systems. These systems collaborate with each other to run the entire power system in a secure and economic manner. Each self-governing system accounts for its local reserve requirements and line flow constraints with respect to the uncertainties of load and renewable energy resources. A set of chance constraints are formulated to model the interactions between the ISO and DISCOs. The proposed model is solved by using analytical target cascading (ATC) method, a distributed optimization algorithm in which only a limited amount of information is exchanged between collaborative ISO and DISCOs. In this paper, a 6-bus and a modified IEEE 118-bus power systems are studied to show the effectiveness of the proposed algorithm.

  14. Control-based operating system design

    CERN Document Server

    Leva, Alberto; Papadopoulos, AV; Terraneo, F

    2013-01-01

    This book argues that computer operating system components should be conceived from the outset as controllers, synthesised and assessed in the system-theoretical world of dynamic models, and then realised as control algorithms.

  15. SEE SAW BASED REGENERATIVE POWER SYSTEM

    OpenAIRE

    Tribhuwan Singh; Shahzad Ali

    2016-01-01

    Research related to electrical vehicles is gaining importance due to the energy crisis. Using regenerative braking when braking, improves the efficiency of an electric vehicle as it recovers energy that could go to waste if mechanical brakes were used. A novel regenerative braking system for neighborhood electric vehicles was designed, prototyped and tested. The proposed system utilizes a seesaw system to capture energy whereas the conventional systems regenerate to the batteries. The user ha...

  16. Information Hiding based Trusted Computing System Design

    Science.gov (United States)

    2014-07-18

    and the environment where the system operates (electrical network frequency signals), and how to improve the trust in a wireless sensor network with...the system (silicon PUF) and the environment where the system operates (ENF signals). We also study how to improve the trust in a wireless sensor...Harbin Institute of Technology, Shenzhen , China, May 26, 2013. (Host: Prof. Aijiao Cui) 13) “Designing Trusted Energy-Efficient Circuits and Systems

  17. Android Based Total Security for System Authentication

    Directory of Open Access Journals (Sweden)

    Mithil Vasani

    2015-04-01

    Full Text Available In this Paper [5], A highly severe menace to any computing device is the impersonation of an authenticate user. The most frequent computer authentication scheme is to use alphanumerical usernames and passwords. But the textual passwords are prone to dictionary attacks, eves dropping, shoulder surfing and social engineering. As such, graphical passwords have been introduced as an alternative to the traditional authentication process. Though the graphical password schemes provide a way of making more user friendly passwords, while increasing the level of security, they are vulnerable to shoulder surfing. To address this problem, text can be used in combination with the colors and images to generate the session passwords, thereby making a stronger authentication means. In general, session passwords are those that can be used only once and for every new session, a new password is engendered. This paper [7] describes a method of implementing two factor authentication using mobile phones. The proposed method guarantees that authenticating to services, such as online banking or ATM machines, is done in a very secure manner. The proposed system involves using a mobile phone as a software token for One Time Password generation. The generated One Time Password is valid for only a short user defined period of time and is generated by factors that are unique to both, the user and the mobile device itself. Additionally, an SMS-based mechanism is implemented as both a backup mechanism for retrieving the password and as a possible mean of synchronization. The proposed method has been implemented and tested. Initial results show the success of the proposed method.

  18. Intelligent Agent-Based System for Digital Library Information Retrieval

    Institute of Scientific and Technical Information of China (English)

    师雪霖; 牛振东; 宋瀚涛; 宋丽哲

    2003-01-01

    A new information search model is reported and the design and implementation of a system based on intelligent agent is presented. The system is an assistant information retrieval system which helps users to search what they need. The system consists of four main components: interface agent, information retrieval agent, broker agent and learning agent. They collaborate to implement system functions. The agents apply learning mechanisms based on an improved ID3 algorithm.

  19. Research on an Urban Traffic Control System Based on DGPS

    Institute of Scientific and Technical Information of China (English)

    张锦; 张姝慧; 曹继红

    2002-01-01

    The basic principles of GPS (Global Positioning System) and DGPS (Differential GPS) are described. The principle and structure of vehicle navigation systems, and its application to the urban traffic flow guidance are analyzed. Then, an area-coordinated adaptive control system based on DGPS and a traffic flow guidance information system based on DGPS are put forward, and their working principles and functions are researched. This is to provides a new way for the development of urban road traffic control systems.

  20. PQ Control Based Grid Connected DG Systems

    Directory of Open Access Journals (Sweden)

    P Siva Srinivas1 ,

    2015-10-01

    Full Text Available Distributed generation (DG generally refer to small scale electric power generators produce electricity that is bound to an electric distribution system. Distributed generation systems such as photovoltaic (PV or wind energy systems are parts of the future smart grids. By applying intelligent techniques these future grids change as smarter grids. During the past few years electrical energy consumption to the investment is increased when compared to cost on transmission and distribution resulting in compromised reliability and high energy costs. So there is need to change from conventional grid to smart grid. Micro grids consist of small power sources called distributed generation system. Many distributed generation systems such as photovoltaic systems are grid interfaced through power electronic voltage source inverters. In this paper a boost inverter technique is explained and distributed generation sources such as PV and fuel cell are connected in series with the help of PQ controller technique the above system is evaluated.

  1. Dextran-based microspheres as controlled delivery systems for proteins

    NARCIS (Netherlands)

    Vlugt-Wensink, K.D.F.

    2007-01-01

    Dextran-based microspheres as controlled delivery systems for proteins Dextran based microspheres are investigated as controlled delivery system for proteins. Microspheres were prepared by polymerization of dex-HEMA in an aqueous two-phase system of dex-HEMA and PEG. Protein loaded microspheres are

  2. Agent-based Modeling Methodology for Analyzing Weapons Systems

    Science.gov (United States)

    2015-03-26

    43 Figure 14: Simulation Study Methodology for the Weapon System Analysis Metrics Definition and Data Collection The analysis plan calls for...AGENT-BASED MODELING METHODOLOGY FOR ANALYZING WEAPONS SYSTEMS THESIS Casey D. Connors, Major, USA...AGENT-BASED MODELING METHODOLOGY FOR ANALYZING WEAPONS SYSTEMS THESIS Presented to the Faculty Department of Operational Sciences

  3. Data Mining and Neural Network Techniques in Case Based System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    This paper first puts forward a case-based system framework basedon data mining techniques. Then the paper examines the possibility of using neural n etworks as a method of retrieval in such a case-based system. In this system we propose data mining algorithms to discover case knowledge and other algorithms.

  4. A Belief Rule-Based Expert System to Diagnose Influenza

    DEFF Research Database (Denmark)

    Hossain, Mohammad Shahadat; Khalid, Md. Saifuddin; Akter, Shamima

    2014-01-01

    ). The RIMER approach can handle different types of uncertainties, both in knowledge representation, and in inference procedures. The knowledge-base of this system was constructed by using records of the real patient data along with in consultation with the Influenza specialists of Bangladesh. Practical case......, development and application of an expert system to diagnose influenza under uncertainty. The recently developed generic belief rule-based inference methodology by using the evidential reasoning (RIMER) approach is employed to develop this expert system, termed as Belief Rule Based Expert System (BRBES...... studies were used to validate the BRBES. The system generated results are effective and reliable than from manual system in terms of accuracy....

  5. Host-Based Systemic Network Obfuscation System for Windows

    Science.gov (United States)

    2011-06-01

    1.1 Research Motivation Network packets can reveal the operating system and running services of a host. Ron Gula – the CEO of Nessus, a well-known...Gul09] Ron Gula , “Enchanced Operating System Identification with Nessus.” [Online]. Available: http://blog.tenablesecurity.com/2009/02

  6. A Case-Based System for Construction Project Risk Management

    Institute of Scientific and Technical Information of China (English)

    YANG Lan-rong; ZHANG Jin-long

    2002-01-01

    This paper presents a Case-Based system for assisting construction project managers in identifying risk factors and the corresponding construction project risk. The construction project risk identification model captures the case, acquired from previous completed construction projects and experience. A prototype is developed based on the proposed Case-Based system to determine risk factors along with their risk effects.

  7. A software architecture for knowledge-based systems

    NARCIS (Netherlands)

    Fensel, D; Groenboom, R

    1999-01-01

    The paper introduces a software architecture for the specification and verification of knowledge-based systems combining conceptual and formal techniques. Our focus is component-based specification enabling their reuse. We identify four elements of the specification of a knowledge-based system: a ta

  8. Specification of Dynamics for Knowledge-Based Systems

    NARCIS (Netherlands)

    Eck, van Pascal; Engelfriet, Joeri; Fensel, Dieter; Harmelen, van F.A.H.; Venema, Yde; Willems, Mark

    1998-01-01

    During the last years, a number of formal specification languages for knowledge-based systems have been developed. Characteristic for knowledge-based systems are a complex knowledge base and an inference engine which uses this knowledge to solve a given problem. Specification languages for knowledge

  9. Simulation-Based System Design Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The research objective is to develop, test, and implement effective and efficient simulation techniques for modeling, evaluating, and optimizing systems in order to...

  10. "Information-Based Economy" and Educational System

    OpenAIRE

    Mahir Terzi

    2006-01-01

    "Information-Based Economy", which is today's economy that is a proof and indicator of development level for the countries now on, comes on the scene with its new organizing model on its infrastructure, which is called "Information Society". The phenomenon of administration introduces to "e-Government" for reinforcing the roots of "Information-Based Economy" now. Having a systematic knowledge of the relation between "Information-Based Economy", "Information Society" and "e-Government" as a wh...

  11. Simplified design procedure for base isolation system

    Energy Technology Data Exchange (ETDEWEB)

    Takayama, Mineo; Tada, Hideyuki [Fukuoka Univ. (Japan). Faculty of Engineering

    1995-12-01

    This paper presents a simplified design procedure which incorporates an existing response prediction method for base isolated buildings into design methods for isolation devices (rubber bearings and hysteresis dampers). The procedure enables a designer to easily identify the relationship between tile seismic behavior of base-isolated buildings and the characteristics of isolation devices. The prediction method, proposed by Prof. Akiyama, is based on energy balance between the total input seismic energy and the energy absorbed by the isolation devices. The method is very accurate. The design methods for devices were developed by authors based on experimental and finite element analysis results.

  12. Function and budget based system architecting

    NARCIS (Netherlands)

    Bonnema, Maarten; Horvath, I.; Duhovnik, J.

    2006-01-01

    The paper presents the principles of a method that integrates functional modelling and requirements modelling to support the system architect in creating and comparing system architectures. Integration is achieved by a coupling matrix that connects functions to key drivers or requirements. Using the

  13. Palmprint Based Verification System Using SURF Features

    Science.gov (United States)

    Srinivas, Badrinath G.; Gupta, Phalguni

    This paper describes the design and development of a prototype of robust biometric system for verification. The system uses features extracted using Speeded Up Robust Features (SURF) operator of human hand. The hand image for features is acquired using a low cost scanner. The palmprint region extracted is robust to hand translation and rotation on the scanner. The system is tested on IITK database of 200 images and PolyU database of 7751 images. The system is found to be robust with respect to translation and rotation. It has FAR 0.02%, FRR 0.01% and accuracy of 99.98% and can be a suitable system for civilian applications and high-security environments.

  14. Remote control of microcontroller-based infant stimulating system.

    Science.gov (United States)

    Burunkaya, M; Güler, I

    2000-04-01

    In this paper, a remote-controlled and microcontroller-based cradle is designed and constructed. This system is also called Remote Control of Microcontroller-Based Infant Stimulation System or the RECOMBIS System. Cradle is an infant stimulating system that provides relaxation and sleeping for the baby. RECOMBIS system is designed for healthy full-term newborns to provide safe infant care and provide relaxation and sleeping for the baby. A microcontroller-based electronic circuit was designed and implemented for RECOMBIS system. Electromagnets were controlled by 8-bit PIC16F84 microcontroller, which is programmed using MPASM package. The system works by entering preset values from the keyboard, or pulse code modulated radio frequency remote control system. The control of the system and the motion range were tested. The test results showed that the system provided a good performance.

  15. Numerical investigation of smart base isolation system employing MR elastomer

    Energy Technology Data Exchange (ETDEWEB)

    Usman, M; Sung, S H; Jang, D D; Jung, H J [Department of Civil and Environmental Engineering, KAIST, 305-701, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Koo, J H [Department of Mechanical and Manufacturing Engineering, Miami University, Oxford, Ohio 45056 (United States)], E-mail: hjung@kaist.ac.kr

    2009-02-01

    This paper evaluates the dynamic performance of a newly proposed smart base isolation system employing Magneto-Rheological Elastomers (MREs). MREs belong to a class of smart materials whose elastic modulus or stiffness can be adjusted by varying the magnitude of the magnetic field. The base isolation systems are considered as one of the most effective devices for vibration reduction of civil engineering structures in the event of earthquakes. The proposed base isolation system strives to enhance the performance of the conventional base-isolation system by using controllable MREs. To validate the effectiveness of the MRE-based isolation system, an extensive simulation study has been performed using a five degree-of-freedom structure under several historical earthquake excitations. The results show that the proposed system outperformed the conventional system in reducing the responses of the structure in all the seismic excitations considered in the study.

  16. Lunar base scenario cost estimates: Lunar base systems study task 6.1

    Science.gov (United States)

    1988-01-01

    The projected development and production costs of each of the Lunar Base's systems are described and unit costs are estimated for transporting the systems to the lunar surface and for setting up the system.

  17. WMN-based city traffic information acquisition system

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Traffic information acquisition system is an essential part of the intelligent transportation system (ITS). This paper presents a novel traffic information acquisition system, i.e., a dynamic traffic information acquisition system based on wireless mesh networks (WMN). The system comprises of probe vehicles and wireless mesh networks. Compared to the conventional systems, it is independent of other network infrastructures and easy to implement. It can acquire the real-time traffic information correctly with lower cost.

  18. Lipid Based Vesicular Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Shikha Jain

    2014-01-01

    Full Text Available Vesicular drug delivery system can be defined as highly ordered assemblies consisting of one or more concentric bilayers formed as a result of self-assembling of amphiphilic building blocks in presence of water. Vesicular drug delivery systems are particularly important for targeted delivery of drugs because of their ability to localize the activity of drug at the site or organ of action thereby lowering its concentration at the other sites in body. Vesicular drug delivery system sustains drug action at a predetermined rate, relatively constant (zero order kinetics, efficient drug level in the body, and simultaneously minimizes the undesirable side effects. It can also localize drug action in the diseased tissue or organ by targeted drug delivery using carriers or chemical derivatization. Different types of pharmaceutical carriers such as polymeric micelles, particulate systems, and macro- and micromolecules are presented in the form of novel drug delivery system for targeted delivery of drugs. Particulate type carrier also known as colloidal carrier system, includes lipid particles, micro- and nanoparticles, micro- and nanospheres, polymeric micelles and vesicular systems like liposomes, sphingosomes, niosomes, transfersomes, aquasomes, ufasomes, and so forth.

  19. A Hybrid Architecture for Web-based Expert Systems

    OpenAIRE

    Neil Dunstan

    2012-01-01

    A recent technique is to represent the knowledge base of an expert system in XML format. XML parsers are then used to convert XML data into expert system language code. The code is executed or interpreted when providing responses to user queries. Web-based expert system (WBES) architectures may be characterized according to where the application knowledge base resides. Applications of both client and server-sided WBES architectures appear in the literature. A hybrid architecture is proposed w...

  20. RESEARCH ON KNOWLEDGE-BASED CAPP SYSTEM FOR ROTOR FORGING

    Institute of Scientific and Technical Information of China (English)

    Wang Leigang; Deng Dongrnei; Liu Zhubai

    2000-01-01

    Guided by developing forging technology theory,designing rules on rotor forging process are summed up.Knowledge-based CAPP system for rotor forging is created.The system gives a rational and optimum process.

  1. Probabilistic Model-Based Diagnosis for Electrical Power Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — We present in this article a case study of the probabilistic approach to model-based diagnosis. Here, the diagnosed system is a real-world electrical power system,...

  2. Physical Optics Based Computational Imaging Systems

    Science.gov (United States)

    Olivas, Stephen Joseph

    There is an ongoing demand on behalf of the consumer, medical and military industries to make lighter weight, higher resolution, wider field-of-view and extended depth-of-focus cameras. This leads to design trade-offs between performance and cost, be it size, weight, power, or expense. This has brought attention to finding new ways to extend the design space while adhering to cost constraints. Extending the functionality of an imager in order to achieve extraordinary performance is a common theme of computational imaging, a field of study which uses additional hardware along with tailored algorithms to formulate and solve inverse problems in imaging. This dissertation details four specific systems within this emerging field: a Fiber Bundle Relayed Imaging System, an Extended Depth-of-Focus Imaging System, a Platform Motion Blur Image Restoration System, and a Compressive Imaging System. The Fiber Bundle Relayed Imaging System is part of a larger project, where the work presented in this thesis was to use image processing techniques to mitigate problems inherent to fiber bundle image relay and then, form high-resolution wide field-of-view panoramas captured from multiple sensors within a custom state-of-the-art imager. The Extended Depth-of-Focus System goals were to characterize the angular and depth dependence of the PSF of a focal swept imager in order to increase the acceptably focused imaged scene depth. The goal of the Platform Motion Blur Image Restoration System was to build a system that can capture a high signal-to-noise ratio (SNR), long-exposure image which is inherently blurred while at the same time capturing motion data using additional optical sensors in order to deblur the degraded images. Lastly, the objective of the Compressive Imager was to design and build a system functionally similar to the Single Pixel Camera and use it to test new sampling methods for image generation and to characterize it against a traditional camera. These computational

  3. Fibre laser based broadband THz imaging systems

    DEFF Research Database (Denmark)

    Eichhorn, Finn

    State-of-the-art optical fiber technology can contribute towards complex multi-element broadband terahertz imaging systems. Classical table-top terahertz imaging systems are generally limited to a single emitter/receiver pair, which constrains their imaging capability to tedious raster scanning...... imaging techniques. This thesis exhibits that fiber technology can improve the robustness and the flexibility of terahertz imaging systems both by the use of fiber-optic light sources and the employment of optical fibers as light distribution medium. The main focus is placed on multi-element terahertz...

  4. Design considerations for lunar base photovoltaic power systems

    Science.gov (United States)

    Hickman, J. Mark; Curtis, Henry B.; Landis, Geoffrey A.

    1990-01-01

    A survey was made of factors that may affect the design of photovoltaic arrays for a lunar base. These factors, which include the lunar environment and system design criteria, are examined. A photovoltaic power system design with a triangular array geometry is discussed and compared to a nuclear reactor power systems and a power system utilizing both nuclear and solar power sources.

  5. A Ferret-based gastrointestinal image retrieval system.

    Science.gov (United States)

    Bedrick, Steven; Kalpathy-Cramer, Jayashree

    2007-10-11

    We developed a web-based interface for image retrieval and cluster analysis system. The system handles search queries using Ferret, a port to the Ruby language of the Apache Lucene indexing and searching system. The system uses de-identified endoscopic images from the Clinical Outcomes Research Initiative data repository, and is designed for use by students and researchers.

  6. A Living-Systems Design Model for Web-based Knowledge Management Systems.

    Science.gov (United States)

    Plass, Jan L.; Salisbury, Mark W.

    2002-01-01

    Reviews currently available instructional systems design models and describes a new design model for Web-based knowledge management (KM) systems, based on a living-systems approach, and the mechanisms it contains for accommodating change and growth. Illustrates the application of the phases of the model in the development of a KM system with…

  7. CICERO: Control Information system Concepts based\

    CERN Multimedia

    2002-01-01

    RD38 : Modern High Energy Physics experiments and accelerators require sophisticated control systems to ensure their safe operation and to optimise their performance. Due to their complexity and to the large number of sensors needed for these purposes, they turn out to be difficult and costly to maintain with the present technology. The situation will seriously worsen with the LHC era. Various R\\&D departments of industrial companies are directly concerned with similar difficulties in power plants and complex automated systems. We propose to combine our efforts to study the various aspects of this problem. We intend to outline the main building blocks of generic control information system. As a result of this study we aim to provide technical solutions which could later be the major components of a basic turnkey system for medium to large scale HEP experiments and accelerators.

  8. Gaussian process based recursive system identification

    Science.gov (United States)

    Prüher, Jakub; Šimandl, Miroslav

    2014-12-01

    This paper is concerned with the problem of recursive system identification using nonparametric Gaussian process model. Non-linear stochastic system in consideration is affine in control and given in the input-output form. The use of recursive Gaussian process algorithm for non-linear system identification is proposed to alleviate the computational burden of full Gaussian process. The problem of an online hyper-parameter estimation is handled using proposed ad-hoc procedure. The approach to system identification using recursive Gaussian process is compared with full Gaussian process in terms of model error and uncertainty as well as computational demands. Using Monte Carlo simulations it is shown, that the use of recursive Gaussian process with an ad-hoc learning procedure offers converging estimates of hyper-parameters and constant computational demands.

  9. P systems based on tag operations

    Directory of Open Access Journals (Sweden)

    Yurii Rogozhin

    2012-10-01

    Full Text Available In this article we introduce P systems using Post's tag operation on strings.We show that the computational completeness can be achieved even if the deletion length is equal to one.

  10. Web Based Distributed Coastal Image Analysis System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project develops Web based distributed image analysis system processing the Moderate Resolution Imaging Spectroradiometer (MODIS) data to provide decision...

  11. Verifying real-time systems against scenario-based requirements

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Li, Shuhao; Nielsen, Brian;

    2009-01-01

    subset of the LSC language. By equivalently translating an LSC chart into an observer TA and then non-intrusively composing this observer with the original system model, the problem of verifying a real-time system against a scenario-based requirement reduces to a classical real-time model checking......We propose an approach to automatic verification of real-time systems against scenario-based requirements. A real-time system is modeled as a network of Timed Automata (TA), and a scenario-based requirement is specified as a Live Sequence Chart (LSC). We define a trace-based semantics for a kernel...

  12. An expert system based intelligent control scheme for space bioreactors

    Science.gov (United States)

    San, Ka-Yiu

    1988-01-01

    An expert system based intelligent control scheme is being developed for the effective control and full automation of bioreactor systems in space. The scheme developed will have the capability to capture information from various resources including heuristic information from process researchers and operators. The knowledge base of the expert system should contain enough expertise to perform on-line system identification and thus be able to adapt the controllers accordingly with minimal human supervision.

  13. Research of Manufacture Time Management System Based on PLM

    Science.gov (United States)

    Jing, Ni; Juan, Zhu; Liangwei, Zhong

    This system is targeted by enterprises manufacturing machine shop, analyzes their business needs and builds the plant management information system of Manufacture time and Manufacture time information management. for manufacturing process Combined with WEB technology, based on EXCEL VBA development of methods, constructs a hybrid model based on PLM workshop Manufacture time management information system framework, discusses the functionality of the system architecture, database structure.

  14. Commercial Data Base Management System for Geonames Data Base.

    Science.gov (United States)

    1984-12-01

    inadequate operating RAPPORT Logica systems (eg., HP-3000) can also be dismissed without being RD4 Hitachi troubled by the details of their implementation...year free; 10 percent of license fee Both RAMIS I from Mathematical Products Group and anually thereaerent. RAPPORT from Logica are to be upgraded in the

  15. The development of component-based information systems

    CERN Document Server

    Cesare, Sergio de; Macredie, Robert

    2015-01-01

    This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

  16. Mixed Biopolymer Systems Based on Starch

    Directory of Open Access Journals (Sweden)

    Takahiro Noda

    2012-01-01

    Full Text Available A binary mixture of starch–starch or starch with other biopolymers such as protein and non-starch polysaccharides could provide a new approach in producing starch-based food products. In the context of food processing, a specific adjustment in the rheological properties plays an important role in regulating production processing and optimizing the applicability, stability, and sensory of the final food products. This review examines various biopolymer mixtures based on starch and the influence of their interaction on physicochemical and rheological properties of the starch-based foods. It is evident that the physicochemical and rheological characteristics of the biopolymers mixture are highly dependent on the type of starch and other biopolymers that make them up mixing ratios, mixing procedure and presence of other food ingredients in the mixture. Understanding these properties will lead to improve the formulation of starch–based foods and minimize the need to resort to chemically modified starch.

  17. Controlled cooling of an electronic system based on projected conditions

    Energy Technology Data Exchange (ETDEWEB)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2015-08-18

    Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

  18. Controlled cooling of an electronic system based on projected conditions

    Science.gov (United States)

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2016-05-17

    Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

  19. Localized Knowledge based System for Human Disease Diagnosis

    Directory of Open Access Journals (Sweden)

    Adane Nega Tarekegn

    2016-03-01

    Full Text Available —Knowledge based system can be designed to solve complex medical problems. It incorporates the expert‟s knowledge that has been coded into facts, rules, heuristics and procedures. Incorporation of local languages with the knowledge based system allows endusers communicate with the system in a simpler and easier way. In this study a localized knowledge based system is developed for TB disease diagnosis using Ethiopian national language. To develop the localized knowledge based system, tacit knowledge is acquired from domain experts using interviewing techniques and explicit knowledge is captured from documented sources using relevant documents analysis method. Then the acquired knowledge is modeled using decision tree structure that represents concepts and procedures involved in diagnosis of disease. Production rules are used to represent domain knowledge. The localized knowledge based system is developed using SWI Prolog version 6.4.1 programming language. Prolog supports natural language processing feature to localize the system. As a result, the system is implemented using Amharic language (the national language of Ethiopia user interface. With Localization, users at remote areas and users who are not good in foreign languages are benefited enormously. The system is tested and evaluated to ensure that whether the performance of the system is accurate and the system is usable by physicians and patients. The average performance of the localized knowledge based system has registered 81.5%.

  20. Implementing Management Systems-Based Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Campisi, John A.; Reese, Robert T.

    1999-05-03

    A management system approach for evaluating environment, safety, health, and quality is in use at Sandia National Laboratories (SNL). Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. As a multi-program national laboratory, SNL has many diverse operations including research, engineering development and applications, production, and central services supporting all activities and operations. Basic research examples include fusion power generation, nuclear reactor experiments, and investigation of combustion processes. Engineering development examples are design, testing, and prototype developments of micro-mechanical systems for safe'~arding computer systems, air bags for automobiles, satellite systems, design of transportation systems for nuclear materials, and systems for use in medical applications such as diagnostics and surgery. Production operations include manufacture of instrumented detection devices, radioisotopes, and replacement parts for previously produced engineered systems. Support services include facilities engineering, construction, and site management, site security, packaging and transportation of hazardous materials wastes, ES&H functional programs to establish requirements and guidance to comply with federal, state, local, and contractual requirements and work safety. In this diverse environment, unlike more traditional single function business units, an integrated consistent management system is not typical. Instead, each type of diverse activity has its own management system designed and distributed around the operations, personnel, customers, and facilities (e.g., hazards involved, security, regulatory requirements, and locations). Laboratory managers are not likely to have experience in the more traditional hierarchical or command and control structures and thus do not share oversight expectations found in

  1. Cyber physical system based on resilient ICT

    Science.gov (United States)

    Iwatsuki, Katsumi

    2016-02-01

    While development of science and technology has built up the sophisticated civilized society, it has also resulted in quite a few disadvantages in global environment and human society. The common recognition has been increasingly shared worldwide on sustainable development society attaching greater importance to the symbiotic relationship with nature and social ethics. After the East Japan Great Earthquake, it is indispensable for sustainable social development to enhance capacity of resistance and restoration of society against natural disaster, so called "resilient society". Our society consists of various Cyber Physical Systems (CPSs) that make up the physical systems by fusing with an Information Communication Technology (ICT). We describe the proposed structure of CPS in order to realize resilient society. The configuration of resilient CPS consisting of ICT and physical system is discussed to introduce "autonomous, distributed, and cooperative" structure, where subsystems of ICT and physical system are simultaneously coordinated and cooperated with Business Continuity Planning (BCP) engine, respectively. We show the disaster response information system and energy network as examples of BCP engine and resilient CPS, respectively. We also propose the structure and key technology of resilient ICT.

  2. Wireless based Smart Parking System using Zigbee

    Directory of Open Access Journals (Sweden)

    Hamzah Asyrani Bin Sulaiman

    2013-08-01

    Full Text Available One of main issues of developing big parking space for shopping complexes, office complexes and other types of building that requires large parking space is to notify the visitors of occupied and nonoccupied parking space. Most of the visitors might spending up to 30 to 45 minutes just to find an empty parking space. In most recent technology, some parking lot system offered a system that could automatically count when the car entering the empty car space and blocking an infrared signal thus notify the system to count for it. However, this type of sensors actually has an increase of budgeting inorder to install and to be maintained. In this project, we have developed a unique solution by providing cost effective solution by using Zigbee technology in parking lot system technology. Instead of using and maintain cable that need to be installed at the ceiling of the parking lot, we developed a system that use wireless technology of Zigbee and it could notify the visitors of empty and non-empty parking lot.

  3. A knowledge-based system for prototypical reasoning

    Science.gov (United States)

    Lieto, Antonio; Minieri, Andrea; Piana, Alberto; Radicioni, Daniele P.

    2015-04-01

    In this work we present a knowledge-based system equipped with a hybrid, cognitively inspired architecture for the representation of conceptual information. The proposed system aims at extending the classical representational and reasoning capabilities of the ontology-based frameworks towards the realm of the prototype theory. It is based on a hybrid knowledge base, composed of a classical symbolic component (grounded on a formal ontology) with a typicality based one (grounded on the conceptual spaces framework). The resulting system attempts to reconcile the heterogeneous approach to the concepts in Cognitive Science with the dual process theories of reasoning and rationality. The system has been experimentally assessed in a conceptual categorisation task where common sense linguistic descriptions were given in input, and the corresponding target concepts had to be identified. The results show that the proposed solution substantially extends the representational and reasoning 'conceptual' capabilities of standard ontology-based systems.

  4. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1993-01-01

    ) a sequential formulation based on optimality criteria; and (4) a sequential formulation including a new so-called bounds iteration method (BIM). Numerical tests indicate that the sequential technique including the BIM is particularly fast and stable. The B1M is not only effective in reliabilitybased...

  5. Cryptography based on spatial chaotic system

    Science.gov (United States)

    Sun, Fuyan; Lü, Zongwang

    2010-08-01

    Encryption of images is different from that of texts due to some intrinsic features of images such as bulk data capacity and high redundancy, which is generally difficult to handle by traditional methods. This paper proposes a new spatial chaos system(SCS), which is investigated by conducting FIPS 140-1 statistic test, and is especially useful for encryption of digital images. It is shown how to adapt a two dimensional(2D) ergodic matrix obtained from SCS to permute the positions of image pixels and confuse the relationship between the cipher image and plain image simultaneously. Experimental results show that the performance and security of the proposed cryptographic system are better than those of existing lower dimensional chaotic cryptographic systems.

  6. Intrusion Detection Systems Based On Packet Sniffing

    Directory of Open Access Journals (Sweden)

    Ushus Maria Joseph

    2013-01-01

    Full Text Available In the present era of networks, security of network systems is becoming increasingly important, as more and more sensitive information is being stored and manipulated online. The paper entitled ’Packet Sniffing’ is a IDS where it monitors packets on the network wire and attempts to the discovery of hacker/cracker who is attempting to break into system. Packet Sniffing also finds the contents and tracks the data packet in the network system. This sniffing is being performed by comparing the captured packet with the intruder details stored in the database .If the packet is found to be an intruder it is then forwarded to the firewall with the respective message for blocking. The Emotional Ants module contains the sender and receiver .The sender will inform all the other Ants running in other machines about the detection of intruder through his pheromone (Messages. The receiver in Ants will listen for the messages from other Ants

  7. Torsional ultrasonic wave based level measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David E. (Oak Ridge, TN); Kisner, Roger A. (Knoxville, TN)

    2012-07-10

    A level measurement system suitable for use in a high temperature and pressure environment to measure the level of coolant fluid within the environment, the system including a volume of coolant fluid located in a coolant region of the high temperature and pressure environment and having a level therein; an ultrasonic waveguide blade that is positioned within the desired coolant region of the high temperature and pressure environment; a magnetostrictive electrical assembly located within the high temperature and pressure environment and configured to operate in the environment and cooperate with the waveguide blade to launch and receive ultrasonic waves; and an external signal processing system located outside of the high temperature and pressure environment and configured for communicating with the electrical assembly located within the high temperature and pressure environment.

  8. Intelligent Storage System Based on Automatic Identification

    Directory of Open Access Journals (Sweden)

    Kolarovszki Peter

    2014-09-01

    Full Text Available This article describes RFID technology in conjunction with warehouse management systems. Article also deals with automatic identification and data capture technologies and each processes, which are used in warehouse management system. It describes processes from entering goods into production to identification of goods and also palletizing, storing, bin transferring and removing goods from warehouse. Article focuses on utilizing AMP middleware in WMS processes in Nowadays, the identification of goods in most warehouses is carried through barcodes. In this article we want to specify, how can be processes described above identified through RFID technology. All results are verified by measurement in our AIDC laboratory, which is located at the University of Žilina, and also in Laboratory of Automatic Identification Goods and Services located in GS1 Slovakia. The results of our research bring the new point of view and indicate the ways using of RFID technology in warehouse management system.

  9. An Internet Based Anonymous Electronic Cash System

    Directory of Open Access Journals (Sweden)

    Israt Jahan

    2015-04-01

    Full Text Available There is an increase activity in research to improve the current electronic payment system which is parallel with the progress of internet. Electronic cash system is a cryptographic payment system which offers anonymity during withdrawal and purchase. Electronic cash displays serial numbers which can be recorded to allow further tracing. Contrary to their physical counterparts, e-cash have an inherent limitation; they are easy to copy and reuse (double-spending. An observer is a tamper-resistant device, issued by the Internet bank, which is incorporated with the Internet user’s computer that prevents double-spending physically, i.e., the user has no access to her e-cash and therefore he cannot copy them. In this paper, we shall present an anonymous electronic cash scheme on the internet which incorporates tamper-resistant device with user-module.

  10. Logic Foundry: Rapid Prototyping for FPGA-Based DSP Systems

    Directory of Open Access Journals (Sweden)

    Bhattacharyya Shuvra S

    2003-01-01

    Full Text Available We introduce the Logic Foundry, a system for the rapid creation and integration of FPGA-based digital signal processing systems. Recognizing that some of the greatest challenges in creating FPGA-based systems occur in the integration of the various components, we have proposed a system that targets the following four areas of integration: design flow integration, component integration, platform integration, and software integration. Using the Logic Foundry, a system can be easily specified, and then automatically constructed and integrated with system level software.

  11. Coal mine gas monitoring system based on wireless sensor network

    Institute of Scientific and Technical Information of China (English)

    WANG Jian; WANG Ru-lin; WANG Xue-min; SHEN Chuan-he

    2007-01-01

    Based on the nowadays'condition.it is urgent that the gas detection cable communication system must be replaced by the wireless communication systems.The wireless sensors distributed in the environment can achieve the intelligent gas monitoring system.Apply with multilayer data fuse to design working tactics,and import the artificial neural networks to analyze detecting result.The wireless sensors system communicates with the controI center through the optical fiber cable.All the gas sensor nodes distributed in coal mine are combined into an intelligent,flexible structure wireless network system.forming coal mine gas monitoring system based on wireless sensor network.

  12. Telescope Array Control System Based on Wireless Touch Screen Platform

    Science.gov (United States)

    Fu, X. N.; Huang, L.; Wei, J. Y.

    2016-07-01

    GWAC (Ground-based Wide Angle Cameras) are the ground-based observational instruments of the Sino-French cooperation SVOM (Space Variable Objects Monitor) astronomical satellite, and Mini-GWAC is a pathfinder and supplement of GWAC. In the context of the Mini-GWAC telescope array, this paper introduces the design and implementation of a kind of telescope array control system, which is based on wireless serial interface module to communicate. We describe the development and implementation of the system in detail in terms of control system principle, system hardware structure, software design, experiment, and test. The system uses the touch-control PC which is based on the Windows CE system as the upper-computer, the wireless transceiver module and PLC (Programmable Logic Controller) as the core. It has the advantages of low cost, reliable data transmission, and simple operation. So far, the control system has been applied to Mini-GWAC successfully.

  13. Microwave-Based Water Decontamination System

    Science.gov (United States)

    Arndt, G. Dickey (Inventor); Byerly, Diane (Inventor); Sognier, Marguerite (Inventor); Dusl, John (Inventor)

    2016-01-01

    A system for decontaminating a medium. The system can include a medium having one or more contaminants disposed therein. The contaminants can be or include bacteria, fungi, parasites, viruses, and combinations thereof. A microwave energy radiation device can be positioned proximate the medium. The microwave energy radiation device can be adapted to generate a signal having a frequency from about 10 GHz to about 100 GHz. The signal can be adapted to kill one or more of the contaminants disposed within the medium while increasing a temperature of the medium by less than about 10 C.

  14. A proposed organization based on systems theory

    OpenAIRE

    2014-01-01

    The present article is about the analysis of systems for the solution of complex problems that presents in the organization in order to plan the operative design of the organization especially the system of work of high level. El presente articulo trata sobre el análisis de sistemas, orientado hacia la solución de problemas complejos que se presentan en las organizaciones, a fin de planificar el diseño operativo de la organización, en especial, el sistema de trabajo de alto desempeño.

  15. Internet-based intelligent information processing systems

    CERN Document Server

    Tonfoni, G; Ichalkaranje, N S

    2003-01-01

    The Internet/WWW has made it possible to easily access quantities of information never available before. However, both the amount of information and the variation in quality pose obstacles to the efficient use of the medium. Artificial intelligence techniques can be useful tools in this context. Intelligent systems can be applied to searching the Internet and data-mining, interpreting Internet-derived material, the human-Web interface, remote condition monitoring and many other areas. This volume presents the latest research on the interaction between intelligent systems (neural networks, adap

  16. Research of IDSS Architecture Based on Hybrid Systems

    Institute of Scientific and Technical Information of China (English)

    MA Biao; YANG Bao-an

    2005-01-01

    This paper discusses the necessity of building IDSS on hybrid systems, and adopts XML technology to manage isomeric knowledge in hybrid systems. The paper proposes a new architecture of hybrid systems based IDSS whose core system is isomeric knowledge system. The architecture is composed of knowledge component, problems processing system, data component and intelligent user interface. This new architecture aims to enhance the capability of integrating hybrid systems, to improve the supporting effectiveness of decision-making and the intelligent level of IDSS, and tries a new way to elevate the system's ability of handling and learning knowledge.

  17. A smartphone based cardiac coherence biofeedback system.

    Science.gov (United States)

    De Jonckheere, J; Ibarissene, I; Flocteil, M; Logier, R

    2014-01-01

    Cardiac coherence biofeedback training consist on slowing one's breathing to 0.1 Hz in order to simulate the baroreflex sensitivity and increase the respiratory sinus arrhythmia efficiency. Several studies have shown that these breathing exercises can constitute an efficient therapy in many clinical contexts like cardiovascular diseases, asthma, fibromyalgia or post-traumatic stress. Such a non-intrusive therapeutic solution needs to be performed on an 8 to 10 weeks period. Even if some heart rate variability based solutions exist, they presented some mobility constrain rendering these cardiac / respiratory control technologies more difficult to perform on a daily used. In this paper, we present a new simplified smartphone based solution allowing people to process efficient cardiac coherence biofeedback exercises. Based on photo-plethysmographic imaging through the smartphone camera, this sensor-less technology allows controlling cardiac coherence biofeedback exercises through a simplified heart rate variability algorithm.

  18. A Miniature-Based Image Retrieval System

    CERN Document Server

    Islam, Md Saiful

    2010-01-01

    Due to the rapid development of World Wide Web (WWW) and imaging technology, more and more images are available in the Internet and stored in databases. Searching the related images by the querying image is becoming tedious and difficult. Most of the images on the web are compressed by methods based on discrete cosine transform (DCT) including Joint Photographic Experts Group(JPEG) and H.261. This paper presents an efficient content-based image indexing technique for searching similar images using discrete cosine transform features. Experimental results demonstrate its superiority with the existing techniques.

  19. Model Based Control of Reefer Container Systems

    DEFF Research Database (Denmark)

    Sørensen, Kresten Kjær

    This thesis is concerned with the development of model based control for the Star Cool refrigerated container (reefer) with the objective of reducing energy consumption. This project has been carried out under the Danish Industrial PhD programme and has been financed by Lodam together with the Da......This thesis is concerned with the development of model based control for the Star Cool refrigerated container (reefer) with the objective of reducing energy consumption. This project has been carried out under the Danish Industrial PhD programme and has been financed by Lodam together...

  20. An RTM based Distributed Simulation System for Guide Robot

    Directory of Open Access Journals (Sweden)

    Chen Peihua

    2013-10-01

    Full Text Available In order to enhance the robot system integration and development for guide robot, a distributed simulation system was developed in this study using RTM (Robot Technology Middleware technology, which is an open software platform for robot systems. The RT (robot technology system of an adapter, a controller and the robot, together with other CORBA objects, was developed to connect the graphical programing interface with 3D simulator to set up an RTM based distributed simulation system. Simultaneously, the application of the distributed simulation system also confirms the controlling of the real robot utilizing the RT system. The proposed distributed simulation system based on RTM can obviously accelerate the software component development as well as the system integration for guide robot, which will certainly lower the cost of the development of new robot application systems.

  1. Reliability Based Optimization of Structural Systems

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    1987-01-01

    The optimization problem to design structural systems such that the reliability is satisfactory during the whole lifetime of the structure is considered in this paper. Some of the quantities modelling the loads and the strength of the structure are modelled as random variables. The reliability...

  2. Observer Based Compensators for Nonlinear Systems

    Science.gov (United States)

    1989-03-31

    coordinate change that achieves exact linearization could as well be calculated using the Hunt-Su linearization method. However, in our approach, we...the above, we obtain the exact linearization (implying that the development by the authors. system (52) satisfies the Hunt--Su condition): The multi

  3. A Behavior-Based Employee Performance System.

    Science.gov (United States)

    Abernathy, William B.

    2003-01-01

    Discusses human performance technology models for describing and understanding factors involved in day-to-day functioning of employees and then to develop specific remedial interventions as needed, and contrasts it to an organizational performance system perspective used to design an organization before employees are even hired to prevent bad…

  4. Management Concerns for Optical Based Filing Systems

    Science.gov (United States)

    1990-03-01

    terminals, WORM Palo Alto, CA 94303 drives, optical jukeboxes, printers, scanners. Candi Technology Inc. Systems integrators providing 2354 Calle Del Mundo ...n.3, p. 68, 6 February 1989. Dortch, M., "A Storage Media Primer ", LAN Times, v.6, n.1, pp. 38-39, January 1989. Dukeman, John, "Optical Disk - A

  5. Synchronization based system identification of an extended excitable system.

    Science.gov (United States)

    Berg, S; Luther, S; Parlitz, U

    2011-09-01

    A basic state and parameter estimation scheme for an extended excitable system is presented, where time series from a spatial grid of sampling points are used to drive and synchronize corresponding model equations. Model parameters are estimated by minimizing the synchronization error. This estimation scheme is demonstrated using data from generic models of excitable media exhibiting spiral wave dynamics and chaotic spiral break-up that are implemented on a graphics processing unit.

  6. Establishing performance requirements of computer based systems subject to uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, D.

    1997-02-01

    An organized systems design approach is dictated by the increasing complexity of computer based systems. Computer based systems are unique in many respects but share many of the same problems that have plagued design engineers for decades. The design of complex systems is difficult at best, but as a design becomes intensively dependent on the computer processing of external and internal information, the design process quickly borders chaos. This situation is exacerbated with the requirement that these systems operate with a minimal quantity of information, generally corrupted by noise, regarding the current state of the system. Establishing performance requirements for such systems is particularly difficult. This paper briefly sketches a general systems design approach with emphasis on the design of computer based decision processing systems subject to parameter and environmental variation. The approach will be demonstrated with application to an on-board diagnostic (OBD) system for automotive emissions systems now mandated by the state of California and the Federal Clean Air Act. The emphasis is on an approach for establishing probabilistically based performance requirements for computer based systems.

  7. Evaluating Web-Based Learning Systems

    Science.gov (United States)

    Pergola, Teresa M.; Walters, L. Melissa

    2011-01-01

    Accounting educators continuously seek ways to effectively integrate instructional technology into accounting coursework as a means to facilitate active learning environments and address the technology-driven learning preferences of the current generation of students. Most accounting textbook publishers now provide interactive, web-based learning…

  8. Greedy Snake Video Game Based on Nios II System

    OpenAIRE

    2014-01-01

    With the development of large scale integrated circuit, traditional embedded system design method cannot meet the requirements for building complex systems. Therefore, SOC and SOPC technology are widely used nowadays. This thesis aims to development a game platform based on Nios II system using Altera DE2 development and education board and SOPC technology. In this thesis, first a custom Nios II system was built according to the requirements of the game application. The system contains hardwa...

  9. Role-based Integration Method of Enterprise Information System

    Institute of Scientific and Technical Information of China (English)

    YU Ming-hui; FEI Qi; CHEN Xue-guang

    2002-01-01

    This paper analyzes the current situation of enterprise information system and methods of system integration at first. Then a role-based analyzing method is proposed. It can help confirm the keystone of the construction of information system and the direction of system integration. At last, a case study on theintegration of material dispatching information system in a large-scale project is presented briefly. It shows that this new method is more effective than the others are.

  10. Enterprise Information System Architecture Based on Web 2.0

    Institute of Scientific and Technical Information of China (English)

    YI Xiushuang; WANG Yu; LIU Jinghong; WEN Zhankao

    2006-01-01

    Enterprise information systems with a great use of Web 2.0 technologies will be more open, free, and more efficient.With the contrast between classic Web technologies and Web 2.0 technologies, we represent a sample of enterprise information system based on Web 2.0, and show how the use of Web 2.0 technologies changes the system data exchange model of the enterprise information systems and how it improves the efficiency and effectiveness of information systems.

  11. Systems, methods and apparatus for verification of knowledge-based systems

    Science.gov (United States)

    Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Erickson, John D. (Inventor); Gracinin, Denis (Inventor); Rouff, Christopher A. (Inventor)

    2010-01-01

    Systems, methods and apparatus are provided through which in some embodiments, domain knowledge is translated into a knowledge-based system. In some embodiments, a formal specification is derived from rules of a knowledge-based system, the formal specification is analyzed, and flaws in the formal specification are used to identify and correct errors in the domain knowledge, from which a knowledge-based system is translated.

  12. Poseidon: a 2-tier anomaly-based intrusion detection system

    NARCIS (Netherlands)

    Bolzoni, Damiano; Zambon, Emmanuele; Etalle, Sandro; Hartel, Pieter

    2005-01-01

    We present Poseidon, a new anomaly based intrusion detection system. Poseidon is payload-based, and presents a two-tier architecture: the first stage consists of a Self-Organizing Map, while the second one is a modified PAYL system. Our benchmarks on the 1999 DARPA data set show a higher detection r

  13. Distributed Expert-Based Information Systems: An Interdisciplinary Approach.

    Science.gov (United States)

    Belkin, Nicholas J.; And Others

    1987-01-01

    Based on an international workshop held at Rutgers University, this article discusses problems and issues in the design, research, and implementation of distributed expert-based information systems (DEBIS). Information needs of end users are stressed, architectures for expert information retrieval systems are explored, and prototype models are…

  14. Software Reuse of Mobile Systems based on Modelling

    Directory of Open Access Journals (Sweden)

    Guo Ping

    2016-01-01

    Full Text Available This paper presents an architectural style based modelling approach for architectural design, analysis of mobile systems. The approach is developed based on UML-like meta models and graph transformation techniques to support sound methodological principals, formal analysis and refinement. The approach could support mobile system development.

  15. Cobra: A Content-Based Video Retrieval System

    NARCIS (Netherlands)

    Petkovic, M.; Jonker, W.

    2002-01-01

    An increasing number of large publicly available video libraries results in a demand for techniques that can manipulate the video data based on content. In this paper, we present a content-based video retrieval system called Cobra. The system supports automatic extraction and retrieval of high-level

  16. Computer-Based Integrated Learning Systems: Research and Theory.

    Science.gov (United States)

    Hativa, Nira, Ed.; Becker, Henry Jay, Ed.

    1994-01-01

    The eight chapters of this theme issue discuss recent research and theory concerning computer-based integrated learning systems. Following an introduction about their theoretical background and current use in schools, the effects of using computer-based integrated learning systems in the elementary school classroom are considered. (SLD)

  17. Change-Of-Bases Abstractions for Non-Linear Systems

    CERN Document Server

    Sankaranarayanan, Sriram

    2012-01-01

    We present abstraction techniques that transform a given non-linear dynamical system into a linear system or an algebraic system described by polynomials of bounded degree, such that, invariant properties of the resulting abstraction can be used to infer invariants for the original system. The abstraction techniques rely on a change-of-basis transformation that associates each state variable of the abstract system with a function involving the state variables of the original system. We present conditions under which a given change of basis transformation for a non-linear system can define an abstraction. Furthermore, the techniques developed here apply to continuous systems defined by Ordinary Differential Equations (ODEs), discrete systems defined by transition systems and hybrid systems that combine continuous as well as discrete subsystems. The techniques presented here allow us to discover, given a non-linear system, if a change of bases transformation involving degree-bounded polynomials yielding an alge...

  18. Steganography and encrypting based on immunochemical systems.

    Science.gov (United States)

    Kim, Kyung-Woo; Bocharova, Vera; Halámek, Jan; Oh, Min-Kyu; Katz, Evgeny

    2011-05-01

    Steganography and encrypting were demonstrated with immuno-specific systems. IgG-proteins were used as invisible ink developed with complementary antibodies labeled with enzymes producing color spots. The information security was achieved by mixing the target protein-antigens used for the text encoding with masking proteins of similar composition but having different bioaffinity. Two different texts were simultaneously encoded by using two different encoding proteins in a mixture. Various encrypting techniques were exemplified with the immuno-systems used for the steganography. Future use of the developed approach for information protection and watermark-technology was proposed. Scaling down the encoded text to a micro-size is feasible with the use of nanotechnology.

  19. Hopfield neural network based on ant system

    Institute of Scientific and Technical Information of China (English)

    洪炳镕; 金飞虎; 郭琦

    2004-01-01

    Hopfield neural network is a single layer feedforward neural network. Hopfield network requires some control parameters to be carefully selected, else the network is apt to converge to local minimum. An ant system is a nature inspired meta heuristic algorithm. It has been applied to several combinatorial optimization problems such as Traveling Salesman Problem, Scheduling Problems, etc. This paper will show an ant system may be used in tuning the network control parameters by a group of cooperated ants. The major advantage of this network is to adjust the network parameters automatically, avoiding a blind search for the set of control parameters.This network was tested on two TSP problems, 5 cities and 10 cities. The results have shown an obvious improvement.

  20. Nonlinear system modeling based on experimental data

    Energy Technology Data Exchange (ETDEWEB)

    PAEZ,THOMAS L.; HUNTER,NORMAN F.

    2000-02-02

    The canonical variate analysis technique is used in this investigation, along with a data transformation algorithm, to identify a system in a transform space. The transformation algorithm involves the preprocessing of measured excitation/response data with a zero-memory-nonlinear transform, specifically, the Rosenblatt transform. This transform approximately maps the measured excitation and response data from its own space into the space of uncorrelated, standard normal random variates. Following this transform, it is appropriate to model the excitation/response relation as linear since Gaussian inputs excite Gaussian responses in linear structures. The linear model is identified in the transform space using the canonical variate analysis approach, and system responses in the original space are predicted using inverse Rosenblatt transformation. An example is presented.

  1. Lumpability Abstractions of Rule-based Systems

    Directory of Open Access Journals (Sweden)

    Jerome Feret

    2010-10-01

    Full Text Available The induction of a signaling pathway is characterized by transient complex formation and mutual posttranslational modification of proteins. To faithfully capture this combinatorial process in a mathematical model is an important challenge in systems biology. Exploiting the limited context on which most binding and modification events are conditioned, attempts have been made to reduce the combinatorial complexity by quotienting the reachable set of molecular species, into species aggregates while preserving the deterministic semantics of the thermodynamic limit. Recently we proposed a quotienting that also preserves the stochastic semantics and that is complete in the sense that the semantics of individual species can be recovered from the aggregate semantics. In this paper we prove that this quotienting yields a sufficient condition for weak lumpability and that it gives rise to a backward Markov bisimulation between the original and aggregated transition system. We illustrate the framework on a case study of the EGF/insulin receptor crosstalk.

  2. Network Security Enhancement through Honeypot based Systems

    Directory of Open Access Journals (Sweden)

    S Deepa Lakshmi

    2015-02-01

    Full Text Available Computer Networks and Internet has become very famous nowadays since it satisfies people with varying needs by providing variety of appropriate services. Computer Networks have revolutionized our use of computers. Online bills, shopping, transactions and many other essential activities performed on the go by just a single click from our homes. Though it is a boon in this era, it also has its own risks and weaknesses too. Industries need to tussle to provide security to their networks and indeed not possible to offer a cent per cent security due to the intangible intelligence of hackers intruding into the network. This paper exploits the concept of honeypots for providing security to networks of industries which may not have custom intrusion detection systems or firewalls. The proposed model captures the various techniques used by hackers and creates a log of all hacker activities. Thus using this log, the production network system can be prevented from attackers.

  3. Lumpability Abstractions of Rule-based Systems

    CERN Document Server

    Feret, Jerome; Koeppl, Heinz; Petrov, Tatjana; 10.4204/EPTCS.40.10

    2010-01-01

    The induction of a signaling pathway is characterized by transient complex formation and mutual posttranslational modification of proteins. To faithfully capture this combinatorial process in a mathematical model is an important challenge in systems biology. Exploiting the limited context on which most binding and modification events are conditioned, attempts have been made to reduce the combinatorial complexity by quotienting the reachable set of molecular species, into species aggregates while preserving the deterministic semantics of the thermodynamic limit. Recently we proposed a quotienting that also preserves the stochastic semantics and that is complete in the sense that the semantics of individual species can be recovered from the aggregate semantics. In this paper we prove that this quotienting yields a sufficient condition for weak lumpability and that it gives rise to a backward Markov bisimulation between the original and aggregated transition system. We illustrate the framework on a case study of...

  4. Laser Based Information Systems (Selected Pages),

    Science.gov (United States)

    1986-05-22

    from the object; 10- turning mirror; 11- Cardan " suspension; 12-- servodrive; 13- periscope; 14- system for manual control- 15- dissector; 16...automatic tracing. The controlled mirror is mounted in a cardan suspension the axes of which are driven by dc servomotors. With the axes...gyroscope with the velocity of 100-500 deg/h arises because of the friction in the pivots of the Cardan 120 -" 1 support and imperfect balancing. In

  5. Microelectromechanical Systems Actuator Based Reconfigurable Printed Antenna

    Science.gov (United States)

    Simons, Rainee N. (Inventor)

    2005-01-01

    A polarization reconfigurable patch antenna is disclosed. The antenna includes a feed element, a patch antenna element electrically connected to the feed element, and at least one microelectromechanical systems (MEMS) actuator, with a partial connection to the patch antenna element along an edge of the patch antenna element. The polarization of the antenna can be switched between circular polarization and linear polarization through action of the at least one MEMS actuator.

  6. System Reliability for LED-Based Products

    Energy Technology Data Exchange (ETDEWEB)

    Davis, J Lynn; Mills, Karmann; Lamvik, Michael; Yaga, Robert; Shepherd, Sarah D; Bittle, James; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy; Johnson, Cortina; Evans, Amy

    2014-04-07

    Results from accelerated life tests (ALT) on mass-produced commercially available 6” downlights are reported along with results from commercial LEDs. The luminaires capture many of the design features found in modern luminaires. In general, a systems perspective is required to understand the reliability of these devices since LED failure is rare. In contrast, components such as drivers, lenses, and reflector are more likely to impact luminaire reliability than LEDs.

  7. Overcoming limitations of model-based diagnostic reasoning systems

    Science.gov (United States)

    Holtzblatt, Lester J.; Marcotte, Richard A.; Piazza, Richard L.

    1989-01-01

    The development of a model-based diagnostic system to overcome the limitations of model-based reasoning systems is discussed. It is noted that model-based reasoning techniques can be used to analyze the failure behavior and diagnosability of system and circuit designs as part of the system process itself. One goal of current research is the development of a diagnostic algorithm which can reason efficiently about large numbers of diagnostic suspects and can handle both combinational and sequential circuits. A second goal is to address the model-creation problem by developing an approach for using design models to construct the GMODS model in an automated fashion.

  8. The Intelligent CAI System for Chemistry Based on Automated Reasoning

    Institute of Scientific and Technical Information of China (English)

    王晓京; 张景中

    1999-01-01

    A new type of intelligent CAI system for chemistry is developed in this paper based on automated reasoning with chemistry knowledge.The system has shown its ability to solve chemistry problems,to assist students and teachers in studies and instruction with the automated reasoning functions.Its open mode of the knowledge base and its unique style of the interface between the system and human provide more opportunities for the users to acquire living knowledge through active participation.The automated reasoning based on basic chemistry knowledge also opened a new approach to the information storage and management of the ICAI system for sciences.

  9. Power system stabilizers based on modern control techniques

    Energy Technology Data Exchange (ETDEWEB)

    Malik, O.P.; Chen, G.P.; Zhang, Y.; El-Metwally, K. [Calgary Univ., AB (Canada). Dept. of Electrical and Computer Engineering

    1994-12-31

    Developments in digital technology have made it feasible to develop and implement improved controllers based on sophisticated control techniques. Power system stabilizers based on adaptive control, fuzzy logic and artificial networks are being developed. Each of these control techniques possesses unique features and strengths. In this paper, the relative performance of power systems stabilizers based on adaptive control, fuzzy logic and neural network, both in simulation studies and real time tests on a physical model of a power system, is presented and compared to that of a fixed parameter conventional power system stabilizer. (author) 16 refs., 45 figs., 3 tabs.

  10. Matchmaking Semantic Based for Information System Interoperability

    CERN Document Server

    Wicaksana, I Wayan Simri

    2011-01-01

    Unlike the traditional model of information pull, matchmaking is base on a cooperative partnership between information providers and consumers, assisted by an intelligent facilitator (the matchmaker). Refer to some experiments, the matchmaking to be most useful in two different ways: locating information sources or services that appear dynamically and notification of information changes. Effective information and services sharing in distributed such as P2P based environments raises many challenges, including discovery and localization of resources, exchange over heterogeneous sources, and query processing. One traditional approach for dealing with some of the above challenges is to create unified integrated schemas or services to combine the heterogeneous sources. This approach does not scale well when applied in dynamic distributed environments and has many drawbacks related to the large numbers of sources. The main issues in matchmaking are how to represent advertising and request, and how to calculate poss...

  11. Novel Fuel Cells for Coal Based Systems

    Energy Technology Data Exchange (ETDEWEB)

    Thomas Tao

    2011-12-31

    The goal of this project was to acquire experimental data required to assess the feasibility of a Direct Coal power plant based upon an Electrochemical Looping (ECL) of Liquid Tin Anode Solid Oxide Fuel Cell (LTA-SOFC). The objective of Phase 1 was to experimentally characterize the interaction between the tin anode, coal fuel and cell component electrolyte, the fate of coal contaminants in a molten tin reactor (via chemistry) and their impact upon the YSZ electrolyte (via electrochemistry). The results of this work will provided the basis for further study in Phase 2. The objective of Phase 2 was to extend the study of coal impurities impact on fuel cell components other than electrolyte, more specifically to the anode current collector which is made of an electrically conducting ceramic jacket and broad based coal tin reduction. This work provided a basic proof-of-concept feasibility demonstration of the direct coal concept.

  12. Web-based tribology design repository system

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Tribology design is one of the most important parts of mechanical product design as thestrength design. Unfortunately, because tribology design knowledge is often m ulti-disciplinary,complicated and piecemeal, it is therefore difficult for a mechanical designer to capture the neededtribology design knowledge. The concept of tribology design repository is proposed in this paper totry to address this problem. This paper presents an object-oriented knowledge representation lan-guage based on the modeling of tribology design component and it makes the complicated tribol-ogy knowledge represented has such advantages as inheritance, encapsulation, and consistency.A web-based triblogy design repository is then established and it enables the edition, retrieve,sharing and reuse of corporate tribology design knowledge in the repository from the Internet.

  13. OPEN ARCHITECTURE FOR INTERNET BASED TELE-ROBOTIC SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Li Xiaoming; Yang Canjun; Chen Ying

    2004-01-01

    Building an Internet based tele-robotic system requires the developers being proficient in computer theory, network technology, control theory, etc. A Flexible, open structured and module based framework for tele-control system is proposed on the basis of abstraction and analysis of existing Internet-based control systems. This framework is designed following the peer to peer (P2P) distributed computing model. As a key to the system, the XML based ontology of resources/modules/peers is discussed, so do the model for dynamically allocating of resources, based on which the coordination among modules or peers can then be implemented. The experiment system and its experimental results prove the feasibility of the framework and its ease to use.

  14. Space Based Infrared System High (SBIRS High)

    Science.gov (United States)

    2015-12-01

    Aviation Blvd Bldg 271 Los Angeles Air Force Base (LAAFB) El Segundo, CA 90245-2808 michael.guetlein@us.af.mil Phone: 310-653-3018 Fax: 310-653-4414 DSN...mission areas: Missile Warning , Missile Defense, Technical Intelligence and Battlespace Awareness. The constellation architecture for SBIRS High...Integrated Tactical Warning /Attack Assessment (ITW/AA) mission in November 2008 and technical intelligence mission in August 2009. The SBIRS GEO 1

  15. Space-Based Solar Power System Architecture

    Science.gov (United States)

    2012-12-01

    and the efficiencies reached by those high volumes is game -changing. By lowering the cost to orbit so substantially, and by providing safe and routine...chosen the same operational orbit for their notional space based solar power satellite. However, due to the prohibitive costs, a pathfinder or...that orbit will minimize the number of launches required to put the satellite into orbit while still allowing a pathfinder satellite to prove

  16. RFID - based Staff Control System (SCS) in Kazakhstan

    Science.gov (United States)

    Saparkhojayev, N.

    2015-06-01

    RFID - based Staff Control System (SCS) will allow complete hands-free access control, monitoring the whereabouts of employee and record the attendance of the employee as well. Moreover, with a help of this system, it is possible to have a nice report at the end of the month and based on the total number of worked hours, the salary will be allocated to each personnel. The access tag can be read up to 10 centimeters from the RFID reader. The proposed system is based on UHF RFID readers, supported with antennas at gate and transaction sections, and employee identification cards containing RFID-transponders which are able to electronically store information that can be read / written even without the physical contact with the help of radio medium. This system is an innovative system, which describes the benefits of applying RFID- technology in the Education System process of Republic of Kazakhstan. This paper presents the experiments conducted to set up RFID based SCS.

  17. Robot Control System based on Web Application and RFID Technology

    Directory of Open Access Journals (Sweden)

    Barenji Ali Vatankhah

    2015-01-01

    Full Text Available This paper discusses an integration driven framework for enabling the RFID based identification of parts to perform robotic distributor operations in the random mix based parts control based on web application. The RFID technology senses newly arriving parts to be distribution robot, the robot is able to recognize them and perform cooperative distributing via web-based application. The developed web application control system is implemented in the educational robotic arm. RFID system sends real time information from parts to the web application and web based application makes a decision for control of the robot arm, controller of robot controls the robot as based on the decision from web application. The proposed control system has increases the reconfiguration and scalability of robot system.

  18. Ground-Based Calibration Of A Microwave Landing System

    Science.gov (United States)

    Kiriazes, John J.; Scott, Marshall M., Jr.; Willis, Alfred D.; Erdogan, Temel; Reyes, Rolando

    1996-01-01

    System of microwave instrumentation and data-processing equipment developed to enable ground-based calibration of microwave scanning-beam landing system (MSBLS) at distances of about 500 to 1,000 ft from MSBLS transmitting antenna. Ensures accuracy of MSBLS near touchdown point, without having to resort to expense and complex logistics of aircraft-based testing. Modified versions prove useful in calibrating aircraft instrument landing systems.

  19. A performance-based methodology for rating remediation systems

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, M.J.; O' Brien, M.C.; Richardson, J.G.; Morrison, J.L.; Morneau, R.A. (Idaho National Engineering Lab., Idaho Falls, ID (United States))

    1993-10-01

    A methodology for evaluating and rating candidate remediation systems has been developed within the Buried Waste Integrated Demonstration (BWID) Systems Analysis Project at the Idaho National Engineering Laboratory (INEL). Called the performance-based technology selection filter (PBTSF), the methodology provides a formalized process to score systems based upon performance measures, and regulatory and technical requirements. The results are auditable and can be validated with field data.

  20. Mitigation of earthquake hazards using seismic base isolation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.Y.

    1994-06-01

    This paper deals with mitigation of earthquake hazards using seismic base-isolation systems. A numerical algorithm is described for system response analysis of isolated structures with laminated elastomer bearings. The focus of this paper is on the adaptation of a nonlinear constitutive equation for the isolation bearing, and the treatment of foundation embedment for the soil-structure-interaction analysis. Sample problems are presented to illustrate the mitigating effect of using base-isolation systems.

  1. An Ethernet LAN based distributed generation system load shedding strategy

    DEFF Research Database (Denmark)

    Wei, Mu; Chen, Zhe

    2011-01-01

    This paper firstly analyzes and compares various communication technologies, and proposes a communication system for a distributed generation system (DGS) with wind turbines. Then the paper presents a novel simulation method of considering the interactions between the communication system and power...... system, by using two software platforms: OPNET and EMTDC/PSCAD. A control method based on the communication technique has been designed to stabilize the DG system during power system disturbances. A case study is presented to demonstrate the effectiveness of the proposed communication system, simulation...... method and control strategy....

  2. Middleware-based Dynamic Traffic Information Collection System

    Directory of Open Access Journals (Sweden)

    Lei Wu

    2014-03-01

    Full Text Available According to traffic information of multi-source heterogeneity and complexity of information processing, hence, the architecture of the dynamic traffic information collection system based on middleware is proposed, which enhances the system stability, generality, and efficiency depending on the high integration and scalability of middleware. This middleware-based system unifies and encodes the data from all sorts of detectors, and integrates the multi-mode transmission, data preprocessing, and data fusion. Compared with the traditional traffic information collection system, the proposed system overcomes the data loss, data noise, and especially the data multiple source, decreases the data redundancy, and ensures the data accuracy with better security and expandability

  3. Adaptive Sensing Based on Profiles for Sensor Systems

    Directory of Open Access Journals (Sweden)

    Yoshiteru Ishida

    2009-10-01

    Full Text Available This paper proposes a profile-based sensing framework for adaptive sensor systems based on models that relate possibly heterogeneous sensor data and profiles generated by the models to detect events. With these concepts, three phases for building the sensor systems are extracted from two examples: a combustion control sensor system for an automobile engine, and a sensor system for home security. The three phases are: modeling, profiling, and managing trade-offs. Designing and building a sensor system involves mapping the signals to a model to achieve a given mission.

  4. Data base design for a worldwide multicrop information system

    Science.gov (United States)

    Driggers, W. G.; Downs, J. M.; Hickman, J. R.; Packard, R. L. (Principal Investigator)

    1979-01-01

    A description of the USDA Application Test System data base design approach and resources is presented. The data is described in detail by category, with emphasis on those characteristics which influenced the design most. It was concluded that the use of a generalized data base in support of crop assessment is a sound concept. The IDMS11 minicomputer base system is recommended for this purpose.

  5. Road landslide information management and forecasting system base on GIS.

    Science.gov (United States)

    Wang, Wei Dong; Du, Xiang Gang; Xie, Cui Ming

    2009-09-01

    Take account of the characters of road geological hazard and its supervision, it is very important to develop the Road Landslides Information Management and Forecasting System based on Geographic Information System (GIS). The paper presents the system objective, function, component modules and key techniques in the procedure of system development. The system, based on the spatial information and attribute information of road geological hazard, was developed and applied in Guizhou, a province of China where there are numerous and typical landslides. The manager of communication, using the system, can visually inquire all road landslides information based on regional road network or on the monitoring network of individual landslide. Furthermore, the system, integrated with mathematical prediction models and the GIS's strongpoint on spatial analyzing, can assess and predict landslide developing procedure according to the field monitoring data. Thus, it can efficiently assists the road construction or management units in making decision to control the landslides and to reduce human vulnerability.

  6. Preface: Internet-Based Management Information Systems

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ Recent decades have witnessed a paradigm shift in management information systems research from a technology orientation to a combined focus on technology and management. This shift stems from advances in information technology coupled with information technology fusion that brings information technology and businesses together. Information technology fusion is characterized by technology transparency in that information technology is no longer seen as an addition to a product or servicebut an inherent element of the product or service, so it is transparent to the users. Information technology fusion is also characterized by technology pervasiveness in that information technology now deeply penetrates many businesses who now rely on information technology for survival.

  7. A Wireless Distributed Condition Monitoring System Based on Bluetooth Technology

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on the discussion of bluetooth and network technology, this paper proposed an entire framework of a wireless distributed monitoring system by combining the characteristics of industry application. The feasibility of putting this kind of system in practice is discussed. The wireless distributed monitoring system can enhance the performance of condition monitoring more than the traditional one used now.

  8. Integration of Management Systems: A Process Based Model

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The paper discusses the barriers of integration of management systems (IMS). A model based on process is explored. It is indicated that integrating management systems should not ignore the characteristics of the management systems, especially scope issues. IMS needs to take into the continuous improvement.

  9. Development of white LED based PV lighting systems

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, O.S.; Pant, P.C.; Prasad, G.; Kumar, Rajesh; Bandyopadhyay, Bibek [Solar Energy Centre, Ministry of New and Renewable Energy, Block 14, CGO Complex, Lodhi Road, New Delhi 110003 (India); Kamala Devi, V. [Agency for Non-Conventional Energy and Rural Technology, P.B. No. 1094, Pattom, P.O. Kasavadasapuram, Trivandrum, Kerala 695 004 (India)

    2010-09-15

    A high performance white light emitting diode (WLED) based PV lighting system has been developed under a joint project of SEC and ANERT. The system has been analyzed using the test set-ups developed as a part of advanced lighting laboratory (ALL). The results show that the performance is one of the best among the systems developed in the capacity range. (author)

  10. Micro-based decision support systems for stock farmers

    OpenAIRE

    H.C. De Kock; Sinclair, M. (Michael)

    2003-01-01

    Decision support systems were developed for use on stock farms. The systems were designed to run on Commodore 8032 microcomputers. They give the user quantitative results on which decisions such as feed mixes, sale of livestock, work programmes, etc can be based. In this paper these systems are described and illustrated with printouts from sample runs.

  11. Document Indexing for Image-Based Optical Information Systems.

    Science.gov (United States)

    Thiel, Thomas J.; And Others

    1991-01-01

    Discussion of image-based information retrieval systems focuses on indexing. Highlights include computerized information retrieval; multimedia optical systems; optical mass storage and personal computers; and a case study that describes an optical disk system which was developed to preserve, access, and disseminate military documents. (19…

  12. Optimal Model-Based Control in HVAC Systems

    DEFF Research Database (Denmark)

    Komareji, Mohammad; Stoustrup, Jakob; Rasmussen, Henrik;

    2008-01-01

    This paper presents optimal model-based control of a heating, ventilating, and air-conditioning (HVAC) system. This HVAC system is made of two heat exchangers: an air-to-air heat exchanger (a rotary wheel heat recovery) and a water-to- air heat exchanger. First dynamic model of the HVAC system...

  13. SECA Coal-Based Systems – LGFCS

    Energy Technology Data Exchange (ETDEWEB)

    Goettler, Richard [LG Fuel Cell Systems Incorporated, North Canton, OH (United States)

    2016-03-31

    LGFCS is developing an integrated planar (IP) SOFC technology for mega-watt scale distributed power generation including the potential for use in highly efficient, economically competitive central generation power plant facilities fuel by coal synthesis gas. The overall goal of this project is to demonstrate, through analysis and testing, progress towards adequate stack life and stability in a low-cost solid-oxide fuel cell (SOFC) stack design. The emphasis of the proposed work has been the further understanding of the degradation mechanisms present within the LGFCS SOFC stack and development of the active layers to mitigate such mechanisms for achievement of a lower rate of power degradation. Performance enhancement has been achieved to support cost reduction. Testing is performed at a range of scales from single cells to ~350 kW bundles and ultimately pressurized 15kW blocks in test rigs that are representative of the product system cycle. The block is the representative fuel cell module that forms the building block for the LGFCS SOFC power system.

  14. On a temporal logic for object-based systems

    NARCIS (Netherlands)

    Distefano, Dino; Katoen, Joost-Pieter; Rensink, Arend

    2000-01-01

    This paper presents a logic, called BOTL (Object-Based Temporal Logic), that facilitates the specification of dynamic and static properties of object-based systems. The logic is based on the branching temporal logic CTL and the Object Constraint Language (OCL), an optional part of the UML standard f

  15. On a Temporal Logic for Object-Based Systems

    NARCIS (Netherlands)

    Distefano, Dino; Katoen, Joost-Pieter; Rensink, Arend; Smith, Scott F.; Talcott, Carolyn L.

    2000-01-01

    This paper presents a logic, called BOTL (Object-Based Temporal Logic), that facilitates the specification of dynamic and static properties of object-based systems. The logic is based on the branching temporal logic CTL and the Object Constraint Language (OCL), an optional part of the UML standard f

  16. Solar Energy Based Automated Irrigation System

    Directory of Open Access Journals (Sweden)

    Prof. Lodhi A. K.

    2013-09-01

    Full Text Available In the field of agriculture, use of proper method of irrigation is important because the main reason is the lack of rains {&} scarcity of land reservoir water. The continuous extraction of water from earth is reducing the water level due to which lot of land is coming slowly in the zones of un-irrigated land. Another very important reason of this is due to unplanned use of water due to which a significant amount of water goes waste. For this purpose; we use this automatic plant irrigation system. In this project we use solar energy which is used to operate the irrigation pump. The circuit comprises of sensor parts built using op-amp IC LM358. Op-amp are configured here as a comparator. Two stiff copper wires are inserted in the soil to sense whether the soil is wet or dry. The Microcontroller is used to control the whole system by monitoring the sensors and when sensors sense the dry condition then the microcontroller will send command to relay driver IC the contacts of which are used to switch on the motor and it will switch off the motor when all the sensors are in wet condition. The microcontroller does the above job as it receives the signal from the sensors through the output of the comparator, and these signals operate under the control of software which is stored in ROM of the Microcontroller. The condition of the pump i.e., ON/OFF is displayed on a 16X2 LCD

  17. Fair Micropayment System Based on Hash Chains

    Institute of Scientific and Technical Information of China (English)

    YANG Zongkai; LANG Weimin; TAN Yunmeng

    2005-01-01

    Micropayment schemes usually do not provide fairness, which means that either the customer or the merchant, or both, can cheat each other and gain a financial advantage by misusing the protocols. This paper proposes an efficient hash chain-based micropayment scheme, which is an offline, prepaid scheme that supports simpler divisibility of digital coins. In the execution of payment protocol, the customer's disbursement and the merchant's submittal are performed step by step, whoever cannot gain addition profits even if he breaks off the transaction. The hash chain can also be used for transactions with different merchants. Unlike other micropayment schemes, e.g., PayWord, no public-key operation is required,which improves the efficiency. The scheme also provides restricted anonymity.

  18. Hybrid Communication System Based on OFDM

    Directory of Open Access Journals (Sweden)

    2013-11-01

    Full Text Available A Hybrid architecture between terrestrial and satellite networks based on Orthogonal Frequency Division Multiplexing (OFDM is employed here. In hybrid architecture, the users will be able to avail the services through the terrestrial networks as well as the satellite networks. The users located in urban areas will be served by the existing terrestrial mobile networks and similarly the one located in rural areas will be provided services through the satellite networks. The technique which is used to achieve this objective is called Pre-FFT adaptive beamforming also called time domain beamforming. When the data is received at the satellite end, the Pre-FFT adaptive beamforming extracts the desired user data from the interferer user by applying the complex weights to the received symbol. The weight for the next symbol is then updated by Least Mean Square (LMS algorithm and then is applied to it. This process is carried out till all the desired user data is extracted.

  19. Optical systems fabricated by printing-based assembly

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-Il; Yu, Chang-Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2017-03-21

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  20. Parity space-based fault diagnosis of CCBII braking system

    Institute of Scientific and Technical Information of China (English)

    黄志武; 杨迎泽; 王晶; 李赟

    2013-01-01

    Fault diagnosis is a key issue of the CCBII(computer controlled brake II) braking system, because the CCBII braking system is very complicated and nonlinear, which may exhibit isolated and multi-component coupled faults. A parity space-based method was proposed for fault diagnosis of CCBII braking systems. Firstly, the mathematical models were established according to three function modules of CCBII braking systems where the air fluid theory was utilized. Then, parity vector and threshold function were designed for each output of the system so as to identify more system faults. Fault character matrix was built based on the causal relationship between the output and the fault according to the system function and internal structure. Finally, fault detection and isolation can be realized by the comparison of the observed system output and the fault character matrix. Simulation results show that the proposed method is entirely feasible and effective.

  1. AOIPS data base management systems support for GARP data sets

    Science.gov (United States)

    Gary, J. P.

    1977-01-01

    A data base management system is identified, developed to provide flexible access to data sets produced by GARP during its data systems tests. The content and coverage of the data base are defined and a computer-aided, interactive information storage and retrieval system, implemented to facilitate access to user specified data subsets, is described. The computer programs developed to provide the capability were implemented on the highly interactive, minicomputer-based AOIPS and are referred to as the data retrieval system (DRS). Implemented as a user interactive but menu guided system, the DRS permits users to inventory the data tape library and create duplicate or subset data sets based on a user selected window defined by time and latitude/longitude boundaries. The DRS permits users to select, display, or produce formatted hard copy of individual data items contained within the data records.

  2. Movable Ground Based Recovery System for Reuseable Space Flight Hardware

    Science.gov (United States)

    Sarver, George L. (Inventor)

    2013-01-01

    A reusable space flight launch system is configured to eliminate complex descent and landing systems from the space flight hardware and move them to maneuverable ground based systems. Precision landing of the reusable space flight hardware is enabled using a simple, light weight aerodynamic device on board the flight hardware such as a parachute, and one or more translating ground based vehicles such as a hovercraft that include active speed, orientation and directional control. The ground based vehicle maneuvers itself into position beneath the descending flight hardware, matching its speed and direction and captures the flight hardware. The ground based vehicle will contain propulsion, command and GN&C functionality as well as space flight hardware landing cushioning and retaining hardware. The ground based vehicle propulsion system enables longitudinal and transverse maneuverability independent of its physical heading.

  3. Design of embedded intelligent monitoring system based on face recognition

    Science.gov (United States)

    Liang, Weidong; Ding, Yan; Zhao, Liangjin; Li, Jia; Hu, Xuemei

    2017-01-01

    In this paper, a new embedded intelligent monitoring system based on face recognition is proposed. The system uses Pi Raspberry as the central processor. A sensors group has been designed with Zigbee module in order to assist the system to work better and the two alarm modes have been proposed using the Internet and 3G modem. The experimental results show that the system can work under various light intensities to recognize human face and send alarm information in real time.

  4. Education Program of Data Base System at College or University

    OpenAIRE

    田村,聡一郎

    1993-01-01

    Education programs of computer system are established at the faculty of Technology, Science or Information Engineering, but those have not been established yet at the other faculties or departments in college or university. At the faculty or department which don't relate to the science or information engineering, education programs of computer system have been on trial at present. Then an education program of computer system, especially about the education program of Data Base System, at th...

  5. Reinforcement learning based backstepping control of power system oscillations

    Energy Technology Data Exchange (ETDEWEB)

    Karimi, Ali; Eftekharnejad, Sara; Feliachi, Ali [Advanced Power and Electric Research Center (APERC), West Virginia University, Morgantown, WV 26506-6109 (United States)

    2009-11-15

    This paper proposes a reinforcement learning based backstepping control technique for damping oscillations in electric power systems using the generators excitation systems. Decentralized controllers are first designed using the backstepping technique. Then, reinforcement learning is used to tune the gains of these controllers to adapt to various operating conditions. Simulation results for a two area power system show that the proposed control technique provides better damping than (i) conventional power system stabilizers and (ii) backstepping fixed gain controllers. (author)

  6. [Implementation of ECG Monitoring System Based on Internet of Things].

    Science.gov (United States)

    Lu, Liangliang; Chen, Minya

    2015-11-01

    In order to expand the capabilities of hospital's traditional ECG device and enhance medical staff's work efficiency, an ECG monitoring system based on internet of things is introduced. The system can monitor ECG signals in real time and analyze data using ECG sensor, PDA, Web servers, which embeds C language, Android systems, .NET, wireless network and other technologies. After experiments, it can be showed that the system has high reliability and stability and can bring the convenience to medical staffs.

  7. FPGA-Based Laboratory Assignments for NoC-Based Manycore Systems

    Science.gov (United States)

    Ttofis, C.; Theocharides, T.; Michael, M. K.

    2012-01-01

    Manycore systems have emerged as being one of the dominant architectural trends in next-generation computer systems. These highly parallel systems are expected to be interconnected via packet-based networks-on-chip (NoC). The complexity of such systems poses novel and exciting challenges in academia, as teaching their design requires the students…

  8. A Formal Approach for Agent Based Large Concurrent Intelligent Systems

    CERN Document Server

    Chaudhary, Ankit

    2011-01-01

    Large Intelligent Systems are so complex these days that an urgent need for designing such systems in best available way is evolving. Modeling is the useful technique to show a complex real world system into the form of abstraction, so that analysis and implementation of the intelligent system become easy and is useful in gathering the prior knowledge of system that is not possible to experiment with the real world complex systems. This paper discusses a formal approach of agent-based large systems modeling for intelligent systems, which describes design level precautions, challenges and techniques using autonomous agents, as its fundamental modeling abstraction. We are discussing Ad-Hoc Network System as a case study in which we are using mobile agents where nodes are free to relocate, as they form an Intelligent Systems. The designing is very critical in this scenario and it can reduce the whole cost, time duration and risk involved in the project.

  9. NASIS data base management system: IBM 360 TSS implementation. Volume 8: Data base administrator user's guide

    Science.gov (United States)

    1973-01-01

    The Data Base Administrator User's Guide for the NASA Aerospace Safety Information System is presented. The subjects discussed are: (1) multi-terminal tasking, (2) data base executive, (3) utilities, (4) maintenance, (5) terminal support, and (6) retrieval subsystem.

  10. Harpoon-based sample Acquisition System

    Science.gov (United States)

    Bernal, Javier; Nuth, Joseph; Wegel, Donald

    2012-02-01

    Acquiring information about the composition of comets, asteroids, and other near Earth objects is very important because they may contain the primordial ooze of the solar system and the origins of life on Earth. Sending a spacecraft is the obvious answer, but once it gets there it needs to collect and analyze samples. Conceptually, a drill or a shovel would work, but both require something extra to anchor it to the comet, adding to the cost and complexity of the spacecraft. Since comets and asteroids are very low gravity objects, drilling becomes a problem. If you do not provide a grappling mechanism, the drill would push the spacecraft off the surface. Harpoons have been proposed as grappling mechanisms in the past and are currently flying on missions such as ROSETTA. We propose to use a hollow, core sampling harpoon, to act as the anchoring mechanism as well as the sample collecting device. By combining these two functions, mass is reduced, more samples can be collected and the spacecraft can carry more propellant. Although challenging, returning the collected samples to Earth allows them to be analyzed in laboratories with much greater detail than possible on a spacecraft. Also, bringing the samples back to Earth allows future generations to study them.

  11. The Geographic Information Grid System Based on Mobile Agent

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    We analyze the deficiencies of current application systems, and discuss the key requirements of distributed Geographic Information service (GIS). We construct the distributed GIS on grid platform. Considering the flexibility and efficiency, we integrate the mobile agent technology into the system. We propose a new prototype system, the Geographic Information Grid System (GIGS) based on mobile agent. This system has flexible services and high performance, and improves the sharing of distributed resources. The service strategy of the system and the examples are also presented.

  12. ARM Processor Based Embedded System for Remote Data Acquisition

    Directory of Open Access Journals (Sweden)

    Raj Kumar Tiwari

    2014-01-01

    Full Text Available The embedded systems are widely used for the data acquisition. The data acquired may be used for monitoring various activity of the system or it can be used to control the parts of the system. Accessing various signals with remote location has greater advantage for multisite operation or unmanned systems. The remote data acquisition used in this paper is based on ARM processor. The Cortex M3 processor used in this system has in-built Ethernet controller which facilitate to acquire the remote data using internet. The system developed provides high performance, low power consumption, smaller size {&} high speed

  13. A car theft deterrent system research based on ARM9

    Science.gov (United States)

    Zhang, Kaisheng; Liu, Jinhao; Fan, Lijun

    2009-07-01

    The traditional automotive burglarproof systems commonly only rely on the simple remote control to security which measures are not perfect and functions are too single. With the development of society, people tend to concern on the fingerprint recognition technology, GSM /GPRS wireless transmission technology, the idea of ARM9-based design of automobile burglarproof system is dependent on both of them. The S3C2410 microprocessor embedded system is used in this system, which is illuminated the idea of the control system design through the hardware and software. The spot use indicates that the high control precision, steady performance and the humanistic rational design of automotive burglarproof system.

  14. Study of systems and techniques for data base management

    Science.gov (United States)

    1976-01-01

    Data management areas were studied to identify pertinent problems and issues that will affect future NASA data users in terms of performance and cost. Specific topics discussed include the identifications of potential NASA data users other than those normally discussed, consideration affecting the clustering of minicomputers, low cost computer system for information retrieval and analysis, the testing of minicomputer based data base management systems, ongoing work related to the use of dedicated systems for data base management, and the problems of data interchange among a community of NASA data users.

  15. "Chromosome": a knowledge-based system for the chromosome classification.

    Science.gov (United States)

    Ramstein, G; Bernadet, M

    1993-01-01

    Chromosome, a knowledge-based analysis system has been designed for the classification of human chromosomes. Its aim is to perform an optimal classification by driving a tool box containing the procedures of image processing, pattern recognition and classification. This paper presents the general architecture of Chromosome, based on a multiagent system generator. The image processing tool box is described from the met aphasic enhancement to the fine classification. Emphasis is then put on the knowledge base intended for the chromosome recognition. The global classification process is also presented, showing how Chromosome proceeds to classify a given chromosome. Finally, we discuss further extensions of the system for the karyotype building.

  16. An Efficient Vein Pattern-based Recognition System

    CERN Document Server

    Soni, Mohit; Rao, M S; Gupta, Phalguni

    2010-01-01

    This paper presents an efficient human recognition system based on vein pattern from the palma dorsa. A new absorption based technique has been proposed to collect good quality images with the help of a low cost camera and light source. The system automatically detects the region of interest from the image and does the necessary preprocessing to extract features. A Euclidean Distance based matching technique has been used for making the decision. It has been tested on a data set of 1750 image samples collected from 341 individuals. The accuracy of the verification system is found to be 99.26% with false rejection rate (FRR) of 0.03%.

  17. An Embedded Rule-Based Diagnostic Expert System in Ada

    Science.gov (United States)

    Jones, Robert E.; Liberman, Eugene M.

    1992-01-01

    Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with it portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assumed a growing role in providing human-like reasoning capability expertise for computer systems. The integration is discussed of expert system technology with Ada programming language, especially a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell. NASA Lewis was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-based power expert system, in ART-Ada. Three components, the rule-based expert systems, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The rules were written in the ART-Ada development environment and converted to Ada source code. The graphics interface was developed with the Transportable Application Environment (TAE) Plus, which generates Ada source code to control graphics images. SMART-Ada communicates with a remote host to obtain either simulated or real data. The Ada source code generated with ART-Ada, TAE Plus, and communications code was incorporated into an Ada expert system that reads the data from a power distribution test bed, applies the rule to determine a fault, if one exists, and graphically displays it on the screen. The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

  18. Design and Implementation of SCADA System Based Power Distribution for Primary Substation (Control System

    Directory of Open Access Journals (Sweden)

    Khin Thu Zar Win

    2014-10-01

    Full Text Available SCADA stands for Supervisory Control and Data Acquisition. SCADA system is more porpular than other control system in the modern industrial processes. This research describes the automated switch control for SCADA based electrical distribution system of primary substation by using PLC. The objective of this research is to transform the manual control system to automated switch control system in Myanmar. There are four main portions in SCADA based electrical distribution system. They are automated control system, interfacing units, monitoring system and networking system. The automated control system is emphasised in this research. This system can be accomplished by using PLC ladder diagram. This automated distribution system is analyzed to develop a secure, reliabe and convenient management tool which can use remote terminal units (RTUs. The simulations based approach automated system are demonstrated in this research. According to the simulation results, the proposed automated control system using PLC are met with the desired control environment with high performance stage. This system is efficient and reliable for conventional electrical distribution system in Myanmar by using SCADA based technology.

  19. Generating Fuzzy Rule-based Systems from Examples Based on Robust Support Vector Machine

    Institute of Scientific and Technical Information of China (English)

    JIA Jiong; ZHANG Hao-ran

    2006-01-01

    This paper firstly proposes a new support vector machine regression (SVR) with a robust loss function, and designs a gradient based algorithm for implementation of the SVR,then uses the SVR to extract fuzzy rules and designs fuzzy rule-based system. Simulations show that fuzzy rule-based system technique based on robust SVR achieves superior performance to the conventional fuzzy inference method, the proposed method provides satisfactory performance with excellent approximation and generalization property than the existing algorithm.

  20. A Multi-parameter Data Acquisition and Analysis System Based on Open VMS Operation System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    We fall into disuse the JUHU system based on the PDP/11 computer for RSX11M operation system,and update our multi-parameter data aequisition and analysis system’s hardware and software based on VAXII computer and Open VMS operation system,make it adapted to the recent physics experiment.In this paper,we describe the updated inulti-parameter data acquisition and analysis system’s hardware,software configuration and system function.

  1. MICROCONTROLLER BASED SOLAR-TRACKING SYSTEM AND ITS IMPLEMENTATION

    Directory of Open Access Journals (Sweden)

    Okan BİNGÖL

    2006-02-01

    Full Text Available In this paper, a new micro-controller based solar-tracking system is proposed, implemented and tested. The scheme presented here can be operated as independent of the geographical location of the site of setting up. The system checks the position of the sun and controls the movement of a solar panel so that radiation of the sun comes normally to the surface of the solar panel. The developed-tracking system tracks the sun both in the azimuth as well as in the elevation plane. PC based system monitoring facility is also included in the design.

  2. Multifunctional non-viral delivery systems based on conjugated polymers.

    Science.gov (United States)

    Yang, Gaomai; Lv, Fengting; Wang, Bing; Liu, Libing; Yang, Qiong; Wang, Shu

    2012-12-01

    Multifunctional nanomaterials with simultaneous therapeutic and imaging functions explore new strategies for the treatment of various diseases. Conjugated polymers (CPs) are considered as novel candidates to serve as multifunctional delivery systems due to their high fluorescence quantum yield, good photostability, and low cytotoxicity. Highly sensitive sensing and imaging properties of CPs are well reviewed, while the applications of CPs as delivery systems are rarely covered. This feature article mainly focuses on CP-based multifunctional non-viral delivery systems for drug, protein, gene, and cell delivery. Promising directions for the further development of CP-based delivery systems are also discussed.

  3. Management of a power system based on renewable energy

    Directory of Open Access Journals (Sweden)

    Ronay Karoly

    2012-06-01

    Full Text Available This article main purpose is to highlight the main advantage of the hardware and software implementation for an energy management system based on renewable energy sources. By using implemented and dedicated hardware and software the evolution of energy production and consumption can be monitored. The advantages of such system are highlighted by the results obtained from experimental simulations. An experimental model for the power system based on renewable energy sources was implemented, where the actual status of the system in different situations when the equipments change their own statuses can be shown.

  4. Mobile Agent Based Framework for Integrating Digital Library System

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Few of the current approaches to achieve the integration of digital library system have considered the influence of network factors on quality of service for the integration system of digital libraries. For this reason, a mobile agent based framework for integrating digital library system is proposed. Based on this framework, a prototype system is implemented and the key technique for it are described. Compared with the current approaches, using mobile agent technique to achieve the integration of digital library system can not only avoid transmitting a lot of data on the network, lower the dependence on network bandwidth for the system, but also improve the quality of service for the integration system of digital libraries in intermitted or unreliable network connection settings.

  5. Web-based healthcare hand drawing management system.

    Science.gov (United States)

    Hsieh, Sheau-Ling; Weng, Yung-Ching; Chen, Chi-Huang; Hsu, Kai-Ping; Lin, Jeng-Wei; Lai, Feipei

    2010-01-01

    The paper addresses Medical Hand Drawing Management System architecture and implementation. In the system, we developed four modules: hand drawing management module; patient medical records query module; hand drawing editing and upload module; hand drawing query module. The system adapts windows-based applications and encompasses web pages by ASP.NET hosting mechanism under web services platforms. The hand drawings implemented as files are stored in a FTP server. The file names with associated data, e.g. patient identification, drawing physician, access rights, etc. are reposited in a database. The modules can be conveniently embedded, integrated into any system. Therefore, the system possesses the hand drawing features to support daily medical operations, effectively improve healthcare qualities as well. Moreover, the system includes the printing capability to achieve a complete, computerized medical document process. In summary, the system allows web-based applications to facilitate the graphic processes for healthcare operations.

  6. Bond graph model-based fault diagnosis of hybrid systems

    CERN Document Server

    Borutzky, Wolfgang

    2015-01-01

    This book presents a bond graph model-based approach to fault diagnosis in mechatronic systems appropriately represented by a hybrid model. The book begins by giving a survey of the fundamentals of fault diagnosis and failure prognosis, then recalls state-of-art developments referring to latest publications, and goes on to discuss various bond graph representations of hybrid system models, equations formulation for switched systems, and simulation of their dynamic behavior. The structured text: • focuses on bond graph model-based fault detection and isolation in hybrid systems; • addresses isolation of multiple parametric faults in hybrid systems; • considers system mode identification; • provides a number of elaborated case studies that consider fault scenarios for switched power electronic systems commonly used in a variety of applications; and • indicates that bond graph modelling can also be used for failure prognosis. In order to facilitate the understanding of fault diagnosis and the presented...

  7. Fractional Chaos Based Communication Systems-An Introduction

    Institute of Scientific and Technical Information of China (English)

    Juebang Yu

    2008-01-01

    As one of secure communication means, chaotic communication systems has been well-developed during the past three decades. Technical papers, both for theoretical and practical investigations, have reached a huge amount in number. On the other hand, fractional chaos, as a parallel ongoing research topic, also attracts many researchers to investigate. As far as the IT field is concerned, the research on control systems by using fractional chaos known as FOC (fractional order control) has been a hot issue for quite a long time. As a comparison, interesting enough, up to now we have not found any research result related to Fractional Chaos Communi cation (FCC) system, Le., a system based on fractional chaos. The motivation of the present article is to reveal the feasibility of realizing communication systems based upon FCC and their superiority over the conventional integer chaotic communication systems. Principles of FCC and its advantages over integer chaotic communication systems are also discussed.

  8. A coincidence detection system based on real-time software

    Science.gov (United States)

    Ayuso, Sindulfo; José Blanco, Juan; Medina, José; Gómez-Herrero, Raúl; García-Población, Oscar; García Tejedor, Ignacio

    2016-09-01

    Conventional real-time coincidence systems use electronic circuitry to detect coincident pulses (hardware coincidence). In this work, a new concept of coincidence system based on real-time software (software coincidence) is presented. This system is based on the recurrent supervision of the analogue-to-digital converters status, which is described in detail. A prototype has been designed and built using a low-cost development platform. It has been applied to two different experimental sets for cosmic ray muon detection. Experimental muon measurements recorded simultaneously using conventional hardware coincidence and our software coincidence system have been compared, yielding identical results. These measurements have also been validated using simultaneous neutron monitor observations. This new software coincidence system provides remarkable advantages such as higher simplicity of interconnection and adjusting. Thus, our system replaces, at least, three Nuclear Instrument Modules (NIMs) required by conventional coincidence systems, reducing its cost by a factor of 40 and eliminating pulse delay adjustments.

  9. Web-Based Expert System for Civil Service Regulations: RCSES

    CERN Document Server

    Hogo, Mofreh; Mousa, Fouad

    2010-01-01

    Internet and expert systems have offered new ways of sharing and distributing knowledge, but there is a lack of researches in the area of web based expert systems. This paper introduces a development of a web-based expert system for the regulations of civil service in the Kingdom of Saudi Arabia named as RCSES. It is the first time to develop such system (application of civil service regulations) as well the development of it using web based approach. The proposed system considers 17 regulations of the civil service system. The different phases of developing the RCSES system are presented, as knowledge acquiring and selection, ontology and knowledge representations using XML format. XML Rule-based knowledge sources and the inference mechanisms were implemented using ASP.net technique. An interactive tool for entering the ontology and knowledge base, and the inferencing was built. It gives the ability to use, modify, update, and extend the existing knowledge base in an easy way. The knowledge was validated by ...

  10. GPSIM: A Personal Computer-Based GPS Simulator System

    Science.gov (United States)

    Ibrahim, D.

    Global Positioning Systems (GPS) are now in use in many applications, ranging from GIS to route guidance, automatic vehicle location (AVL), air, land, and marine navigation, and many other transportation and geographical based applications. In many applications, the GPS receiver is connected to some form of intelligent electronic system which receives the positional data from the GPS unit and then performs the required operation. When developing and testing GPS-based systems, one of the problems is that it is usually necessary to create GPS-compatible geographical data to simulate a GPS operation in real time. This paper provides the details of a Personal Computer (PC)-based GPS simulator system called GPSIM. The system receives user way-points and routes from Windows-based screen forms and then simulates a GPS operation in real time by generating most of the commonly used GPS sentences. The user-specified waypoints are divided into a number of small segments, each segment specifying a small distance in the direction of the original waypoint. The GPS sentence corresponding to the geographical coordinates of each segment is then sent out of the PC serial port. The system described is an invaluable testing tool for GPS-based system developers and also for people training to learn to use GPS-based products.

  11. Applying Model Based Systems Engineering to NASA's Space Communications Networks

    Science.gov (United States)

    Bhasin, Kul; Barnes, Patrick; Reinert, Jessica; Golden, Bert

    2013-01-01

    System engineering practices for complex systems and networks now require that requirement, architecture, and concept of operations product development teams, simultaneously harmonize their activities to provide timely, useful and cost-effective products. When dealing with complex systems of systems, traditional systems engineering methodology quickly falls short of achieving project objectives. This approach is encumbered by the use of a number of disparate hardware and software tools, spreadsheets and documents to grasp the concept of the network design and operation. In case of NASA's space communication networks, since the networks are geographically distributed, and so are its subject matter experts, the team is challenged to create a common language and tools to produce its products. Using Model Based Systems Engineering methods and tools allows for a unified representation of the system in a model that enables a highly related level of detail. To date, Program System Engineering (PSE) team has been able to model each network from their top-level operational activities and system functions down to the atomic level through relational modeling decomposition. These models allow for a better understanding of the relationships between NASA's stakeholders, internal organizations, and impacts to all related entities due to integration and sustainment of existing systems. Understanding the existing systems is essential to accurate and detailed study of integration options being considered. In this paper, we identify the challenges the PSE team faced in its quest to unify complex legacy space communications networks and their operational processes. We describe the initial approaches undertaken and the evolution toward model based system engineering applied to produce Space Communication and Navigation (SCaN) PSE products. We will demonstrate the practice of Model Based System Engineering applied to integrating space communication networks and the summary of its

  12. SECA Coal-Based Systems - LGFCS

    Energy Technology Data Exchange (ETDEWEB)

    Goettler, Richard

    2013-08-01

    than 95% of the mean flow for all bundles. The prior design required unique bundle components and pressure drops specifications to achieve overall strip fuel flow uniformity. 2. Slow crack growth measurements in simulated fuel environments of the MgO-MgAl2O4 substrate by ORNL reveal favorable tolerance against slow crack growth. Evidence as well of a high stress intensity threshold below which crack growth would be avoided. These findings can have very positive implications on long-term structural reliability. More testing is required, including under actual reformate fuels, to gain a deeper understanding of such time dependent reliability mechanisms. 3. A next generation (Gen2) substrate from the LGFCS supplier has been qualified. The substrate incorporates cost reductions and quality improvements. Cell Developments: 1. Subscale testing of the epsilon technology under system relevant conditions surpassed 16,000 hours with a power degradation rate of <1%/1000 hours. Key degradation mechanisms have been identified: (1) MnOx accumulation near the cathode-electrolyte interface and cathode densification (2) metals migration across the anode-ACC bilayer and general microstructure coarsening at high temperatures and peak fuel utilizations and (3) metal migration into primary interconnect (lesser mechanism) 5 2. Alternate LSM cathodes show slightly lower ASR and lesser free MnOx and chromium contamination. Long-term durability screening of three alternate cathodes is being performed. 3. Single layer anodes show very significant improvement in microstructure stability after 5000 hours testing at aggressive conditions of 925C and bundle outlet, high utilization fuel. 4. New primary interconnect designs are being tested that achieve lower ASR. Modeling performed to further balance ASR and cost through optimized designs.

  13. Integrated Cloud-Based Services for Medical Workflow Systems

    Directory of Open Access Journals (Sweden)

    Gharbi Nada

    2016-12-01

    Full Text Available Recent years have witnessed significant progress of workflow systems in different business areas. However, in the medical domain, the workflow systems are comparatively scarcely researched. In the medical domain, the workflows are as important as in other areas. In fact, the flow of information in the healthcare industry is even more critical than it is in other industries. Workflow can provide a new way of looking at how processes and procedures are completed in particular medical systems, and it can help improve the decision-making in these systems. Despite potential capabilities of workflow systems, medical systems still often perceive critical challenges in maintaining patient medical information that results in the difficulties in accessing patient data by different systems. In this paper, a new cloud-based service-oriented architecture is proposed. This architecture will support a medical workflow system integrated with cloud services aligned with medical standards to improve the healthcare system.

  14. Knowledge-based System Prototype in Structural Component Design Based on FM

    Institute of Scientific and Technical Information of China (English)

    JIANG; Tao; LI; Qing-fen; LI; Ming; FU; Wei

    2002-01-01

    A knowledge-based system in structural component design based on fracture mechanics is developed in this paper. The system consists of several functional parts: a general inference engine, a set of knowledge bases and data-bases, an interpretation engine, a bases administration system and the interface. It can simulate a human expert to make analysis and design scheme mainly for four kinds of typical structural components widely used in shipbuilding industry: pressure vessels, huge rotation constructions, pump-rod and welded structures. It is an open system which may be broadened and perfected to cover a wider range of engineering application through the modification and enlargement of knowledge bases and data-bases. It has a natural and friendly interface that may be easily operated. An on-line help service is also provided.

  15. Activity-Based Costing Systems for Higher Education.

    Science.gov (United States)

    Day, Dennis H.

    1993-01-01

    Examines traditional costing models utilized in higher education and pinpoints shortcomings related to proper identification of costs. Describes activity-based costing systems as a superior alternative for cost identification, measurement, and allocation. (MLF)

  16. INTEL: Intel based systems move up in supercomputing ranks

    CERN Multimedia

    2002-01-01

    "The TOP500 supercomputer rankings released today at the Supercomputing 2002 conference show a dramatic increase in the number of Intel-based systems being deployed in high-performance computing (HPC) or supercomputing areas" (1/2 page).

  17. Curvature-based Hyperbolic Systems for General Relativity

    CERN Document Server

    Choquet-Bruhat, Y; Anderson, A; Choquet-Bruhat, Yvonne; York, James W.; Anderson, Arlen

    1998-01-01

    We review curvature-based hyperbolic forms of the evolution part of the Cauchy problem of General Relativity that we have obtained recently. We emphasize first order symmetrizable hyperbolic systems possessing only physical characteristics.

  18. MODIS-Based Products for Operational Decision Support Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SMH Consulting proposes to develop a web-based decision support system to assist in Rapid Assessment, Monitoring, and Management (RAMM-DSS) on a regional scale. SMH...

  19. CENTRIC MANAGEMENT SYSTEM BASED ON NEURO - FUZZY TOPOLOGY

    Directory of Open Access Journals (Sweden)

    Shumkov Y. A.

    2014-11-01

    Full Text Available The article describes the network-centric approach to a building control system based on the "inner teacher" neuro - fuzzy topology, which uses the principles of reinforcement learning

  20. Component-based Control Software Design for Flexible Manufacturing System

    Institute of Scientific and Technical Information of China (English)

    周炳海; 奚立峰; 曹永上

    2003-01-01

    A new method that designs and implements the component-based distributed & hierarchical flexible manufacturing control software is described with a component concept in this paper. The proposed method takes aim at improving the flexibility and reliability of the control system. On the basis of describing the concepts of component-based software and the distributed object technology, the architecture of the component-based software of the control system is suggested with the Common Object Request Broker Architecture (CORBA). And then, we propose a design method for component-based distributed & hierarchical flexible manufacturing control system. Finally, to verify the software design method, a prototype flexible manufacturing control system software has been implemented in Orbix 2. 3c, VC++6.0 and has been tested in connection with the physical flexible ranufacturing shop at the WuXi Professional Institute.

  1. Using Agents in Web-Based Constructivist Collaborative Learning System

    Institute of Scientific and Technical Information of China (English)

    刘莹; 林福宗; 王雪

    2004-01-01

    Web-based learning systems are one of the most interesting topics in the area of the application of computers to education. Collaborative learning, as an important principle in constructivist learning theory, is an important instruction mode for open and distance learning systems. Through collaborative learning, students can greatly improve their creativity, exploration capability, and social cooperation. This paper used an agent-based coordination mechanism to respond to the requirements of an efficient and motivating learning process. This coordination mechanism is based on a Web-based constructivist collaborative learning system, in which students can learn in groups and interact with each other by several kinds of communication modes to achieve their learning objectives efficiently and actively. In this learning system, artificial agents represent an active part in the collaborative learning process; they can partially replace human instructors during the multi-mode interaction of the students.

  2. ICD 10 Based Medical Expert System Using Fuzzy Temporal Logic

    CERN Document Server

    Chinniah, P

    2010-01-01

    Medical diagnosis process involves many levels and considerable amount of time and money are invariably spent for the first level of diagnosis usually made by the physician for all the patients every time. Hence there is a need for a computer based system which not only asks relevant questions to the patients but also aids the physician by giving a set of possible diseases from the symptoms obtained using logic at inference. In this work, an ICD10 based Medical Expert System that provides advice, information and recommendation to the physician using fuzzy temporal logic. The knowledge base used in this system consists of facts of symptoms and rules on diseases. It also provides fuzzy severity scale and weight factor for symptom and disease and can vary with respect to time. The system generates the possible disease conditions based on modified Euclidean metric using Elders algorithm for effective clustering. The minimum similarity value is used as the decision parameter to identify a disease.

  3. Systems of Systems Modeled by a Hierarchical Part-Whole State-Based Formalism

    Directory of Open Access Journals (Sweden)

    Luca Pazzi

    2013-11-01

    Full Text Available The paper presents an explicit state-based modeling approach aimed at modeling Systems of Systems behavior. The approach allows to specify and verify incrementally safety and liveness rules without using model checking techniques. The state-based approach allows moreover to use the system behavior directly as an interface, greatly improving the effectiveness of the recursive composition needed when assembling Systems of Systems. Such systems are, at the same time, both parts and wholes, thus giving a formal characterization to the notion of Holon.

  4. Consolidity: Stack-based systems change pathway theory elaborated

    Directory of Open Access Journals (Sweden)

    Hassen Taher Dorrah

    2014-06-01

    Full Text Available This paper presents an elaborated analysis for investigating the stack-based layering processes during the systems change pathway. The system change pathway is defined as the path resulting from the combinations of all successive changes induced on the system when subjected to varying environments, activities, events, or any excessive internal or external influences and happenings “on and above” its normal stands, situations or set-points during its course of life. The analysis is essentially based on the important overall system paradigm of “Time driven-event driven-parameters change”. Based on this paradigm, it is considered that any affected activity, event or varying environment is intelligently self-recorded inside the system through an incremental consolidity-scaled change in system parameters of the stack-based layering types. Various joint stack-based mathematical and graphical approaches supported by representable case studies are suggested for the identification, extraction, and processing of various stack-based systems changes layering of different classifications and categorizations. Moreover, some selected real life illustrative applications are provided to demonstrate the (infinite stack-based identification and recognition of the change pathway process in the areas of geology, archeology, life sciences, ecology, environmental science, engineering, materials, medicine, biology, sociology, humanities, and other important fields. These case studies and selected applications revealed that there are general similarities of the stack-based layering structures and formations among all the various research fields. Such general similarities clearly demonstrate the global concept of the “fractals-general stacking behavior” of real life systems during their change pathways. Therefore, it is recommended that concentrated efforts should be expedited toward building generic modular stack-based systems or blocks for the mathematical

  5. A Rule-Based Industrial Boiler Selection System

    Science.gov (United States)

    Tan, C. F.; Khalil, S. N.; Karjanto, J.; Tee, B. T.; Wahidin, L. S.; Chen, W.; Rauterberg, G. W. M.; Sivarao, S.; Lim, T. L.

    2015-09-01

    Boiler is a device used for generating the steam for power generation, process use or heating, and hot water for heating purposes. Steam boiler consists of the containing vessel and convection heating surfaces only, whereas a steam generator covers the whole unit, encompassing water wall tubes, super heaters, air heaters and economizers. The selection of the boiler is very important to the industry for conducting the operation system successfully. The selection criteria are based on rule based expert system and multi-criteria weighted average method. The developed system consists of Knowledge Acquisition Module, Boiler Selection Module, User Interface Module and Help Module. The system capable of selecting the suitable boiler based on criteria weighted. The main benefits from using the system is to reduce the complexity in the decision making for selecting the most appropriate boiler to palm oil process plant.

  6. Preventing Recommendation Attack in Trust-Based Recommender Systems

    Institute of Scientific and Technical Information of China (English)

    Fu-Guo Zhang

    2011-01-01

    Despite its success,similarity-based collaborative filtering suffers from some limitations,such as scalability,sparsity and recommendation attack.Prior work has shown incorporating trust mechanism into traditional collaborative filtering recommender systems can improve these limitations.We argue that trust-based recommender systems are facing novel recommendation attack which is different from the profile injection attacks in traditional recommender system.To the best of our knowledge,there has not any prior study on recommendation attack in a trust-based recommender system.We analyze the attack problem,and find that "victim" nodes play a significant role in the attack.Furthermore,we propose a data provenance method to trace malicious users and identify the "victim" nodes as distrust users of recommender system.Feasibility study of the defend method is done with the dataset crawled from Epinions website.

  7. Automatic hearing loss detection system based on auditory brainstem response

    Energy Technology Data Exchange (ETDEWEB)

    Aldonate, J; Mercuri, C; Reta, J; Biurrun, J; Bonell, C; Gentiletti, G; Escobar, S; Acevedo, R [Laboratorio de Ingenieria en Rehabilitacion e Investigaciones Neuromusculares y Sensoriales (Argentina); Facultad de Ingenieria, Universidad Nacional de Entre Rios, Ruta 11 - Km 10, Oro Verde, Entre Rios (Argentina)

    2007-11-15

    Hearing loss is one of the pathologies with the highest prevalence in newborns. If it is not detected in time, it can affect the nervous system and cause problems in speech, language and cognitive development. The recommended methods for early detection are based on otoacoustic emissions (OAE) and/or auditory brainstem response (ABR). In this work, the design and implementation of an automated system based on ABR to detect hearing loss in newborns is presented. Preliminary evaluation in adults was satisfactory.

  8. Research and design of logistical information system based on SOA

    Science.gov (United States)

    Zhang, Bo

    2013-03-01

    Through the study on the existing logistics information systems and SOA technology, based on the current situation of enterprise logistics management and business features, this paper puts forward a SOA-based logistics system design program. This program is made in the WCF framework, with the combination of SOA and the actual characteristics of logistics enterprises, is simple to realize, easy to operate, and has strong expansion characteristic, therefore has high practical value.

  9. Enhanced electrophoretic motion using supercapacitor-based energy storage system.

    Science.gov (United States)

    Liu, Ran; Wong, Flory; Duan, Wentao; Sen, Ayusman

    2013-12-23

    Electrophoretic motion at low potentials is facilitated by redox chemistry occurring in a supercapacitor-based electrochemical energy storage system during charge and discharge. We show that MnO2 -modified electrodes can effectively alleviate the electrode surface polarization, the main factor that leads to inefficient electrophoresis at low voltages. A self-powered electrophoretic system based on a discharging battery has been also fabricated.

  10. Acid-base homeostasis in the human system

    Science.gov (United States)

    White, R. J.

    1974-01-01

    Acid-base regulation is a cooperative phenomena in vivo with body fluids, extracellular and intracellular buffers, lungs, and kidneys all playing important roles. The present account is much too brief to be considered a review of present knowledge of these regulatory systems, and should be viewed, instead, as a guide to the elements necessary to construct a simple model of the mutual interactions of the acid-base regulatory systems of the body.

  11. An expert systems application to space base data processing

    Science.gov (United States)

    Babb, Stephen M.

    1988-01-01

    The advent of space vehicles with their increased data requirements are reflected in the complexity of future telemetry systems. Space based operations with its immense operating costs will shift the burden of data processing and routine analysis from the space station to the Orbital Transfer Vehicle (OTV). A research and development project is described which addresses the real time onboard data processing tasks associated with a space based vehicle, specifically focusing on an implementation of an expert system.

  12. Ultrarelativistic laser systems based on coherent beam combining

    Science.gov (United States)

    Bagayev, S. N.; Trunov, V. I.; Pestryakov, E. V.; Frolov, S. A.; Leschenko, V. E.; Kirpichnikov, A. V.; Kokh, A. E.; Petrov, V. V.; Vasiliev, V. A.

    2012-07-01

    Conceptual design for femtosecond laser system of exawatt class, based on multi-channel amplifier and coherent field combining of petawatt amplifier channels with phase-frequency controlled radiation by optical clock are discussed. The scheme of start petawatt level few-cycle laser system with stable phase-frequency parameters determinated by the accuracy of the optical standard based on parametric amplification in big-size LBO crystals pumped by picosecond pulses is analyzed.

  13. Ultrarelativistic laser systems based on coherent beam combining

    Energy Technology Data Exchange (ETDEWEB)

    Bagayev, S. N.; Trunov, V. I.; Pestryakov, E. V.; Frolov, S. A.; Leschenko, V. E.; Kirpichnikov, A. V.; Kokh, A. E.; Petrov, V. V.; Vasiliev, V. A. [Institute of Laser Physics SB RAS, Ac. Lavrentyev' s prosp., 13/3, Novosibirsk (Russian Federation); Institute of Geology and Mineralogy SB RAS, Ac. Koptug' s prosp., 3, Novosibirsk (Russian Federation); Institute of Laser Physics SB RAS, Ac. Lavrentyev' s prosp., 13/3, Novosibirsk (Russian Federation)

    2012-07-11

    Conceptual design for femtosecond laser system of exawatt class, based on multi-channel amplifier and coherent field combining of petawatt amplifier channels with phase-frequency controlled radiation by optical clock are discussed. The scheme of start petawatt level few-cycle laser system with stable phase-frequency parameters determinated by the accuracy of the optical standard based on parametric amplification in big-size LBO crystals pumped by picosecond pulses is analyzed.

  14. Automatic hearing loss detection system based on auditory brainstem response

    Science.gov (United States)

    Aldonate, J.; Mercuri, C.; Reta, J.; Biurrun, J.; Bonell, C.; Gentiletti, G.; Escobar, S.; Acevedo, R.

    2007-11-01

    Hearing loss is one of the pathologies with the highest prevalence in newborns. If it is not detected in time, it can affect the nervous system and cause problems in speech, language and cognitive development. The recommended methods for early detection are based on otoacoustic emissions (OAE) and/or auditory brainstem response (ABR). In this work, the design and implementation of an automated system based on ABR to detect hearing loss in newborns is presented. Preliminary evaluation in adults was satisfactory.

  15. Personalized Service System Based on Hybrid Filtering for Digital Library

    Institute of Scientific and Technical Information of China (English)

    GAO Fengrong; XING Chunxiao; DU Xiaoyong; WANG Shan

    2007-01-01

    Personalized service systems are an effective way to help users obtain recommendations for unseen items, within the enormous volume of information available based on their preferences. The most commonly used personalized service system methods are collaborative filtering, content-based filtering, and hybrid filtering. Unfortunately,each method has its drawbacks. This paper proposes a new method which unified partition-based collaborative filtering and meta-information filtering.In partition-based collaborative filtering the user-item rating matrix can be partitioned into low-dimensional dense materces using a matrixclustering algorithm. Recommendations are generated based on these low-dimensional matrices.Additionally,the very low ratings problem can be solved using meta-information filtering. The unified method is applied to a digital resource management system. The experimental results show the high efficiency and good performance of the new approach.

  16. Evaluation of computer-based ultrasonic inservice inspection systems

    Energy Technology Data Exchange (ETDEWEB)

    Harris, R.V. Jr.; Angel, L.J.; Doctor, S.R.; Park, W.R.; Schuster, G.J.; Taylor, T.T. [Pacific Northwest Lab., Richland, WA (United States)

    1994-03-01

    This report presents the principles, practices, terminology, and technology of computer-based ultrasonic testing for inservice inspection (UT/ISI) of nuclear power plants, with extensive use of drawings, diagrams, and LTT images. The presentation is technical but assumes limited specific knowledge of ultrasonics or computers. The report is divided into 9 sections covering conventional LTT, computer-based LTT, and evaluation methodology. Conventional LTT topics include coordinate axes, scanning, instrument operation, RF and video signals, and A-, B-, and C-scans. Computer-based topics include sampling, digitization, signal analysis, image presentation, SAFI, ultrasonic holography, transducer arrays, and data interpretation. An evaluation methodology for computer-based LTT/ISI systems is presented, including questions, detailed procedures, and test block designs. Brief evaluations of several computer-based LTT/ISI systems are given; supplementary volumes will provide detailed evaluations of selected systems.

  17. MODELING AND ANALYSIS OF ENERGY SYSTEM BASED ON COMPLEX ADAPTIVE SYSTEM

    Institute of Scientific and Technical Information of China (English)

    QIU Shiming; GU Peiliang

    2004-01-01

    Complex adaptive system (CAS) is a kind of complex system in natural and artificial systems. In this paper, the theory of complex adaptive system is introduced at first. Considering the characteristic of energy system, it can be regarded as a complex adaptive system. After the evolutionary law is analysed, the energy complex system model is established based on CAS and application tool SWARM, which is a simulation software platform. The model differs from the models as well as methods developed before. As an application, China's energy system is simulated with the model established above.China's future total energy demand in the future, energy structure and related in fiuence on environment are presented.

  18. Analysis of system trustworthiness based on information flow noninterference theory

    Institute of Scientific and Technical Information of China (English)

    Xiangying Kong; Yanhui Chen; Yi Zhuang

    2015-01-01

    The trustworthiness analysis and evaluation are the bases of the trust chain transfer. In this paper the formal method of trustworthiness analysis of a system based on the noninterfer-ence (NI) theory of the information flow is studied. Firstly, existing methods cannot analyze the impact of the system states on the trustworthiness of software during the process of trust chain trans-fer. To solve this problem, the impact of the system state on trust-worthiness of software is investigated, the run-time mutual interfer-ence behavior of software entities is described and an interference model of the access control automaton of a system is established. Secondly, based on the intransitive noninterference (INI) theory, a formal analytic method of trustworthiness for trust chain transfer is proposed, providing a theoretical basis for the analysis of dynamic trustworthiness of software during the trust chain transfer process. Thirdly, a prototype system with dynamic trustworthiness on a plat-form with dual core architecture is constructed and a verification algorithm of the system trustworthiness is provided. Final y, the monitor hypothesis is extended to the dynamic monitor hypothe-sis, a theorem of static judgment rule of system trustworthiness is provided, which is useful to prove dynamic trustworthiness of a system at the beginning of system construction. Compared with previous work in this field, this research proposes not only a formal analytic method for the determination of system trustworthiness, but also a modeling method and an analysis algorithm that are feasible for practical implementation.

  19. SVD-Based Evaluation of Multiplexing in Multipinhole SPECT Systems

    Directory of Open Access Journals (Sweden)

    Aaron K. Jorgensen

    2008-01-01

    Full Text Available Multipinhole SPECT system design is largely a trial-and-error process. General principles can give system designers a general idea of how a system with certain characteristics will perform. However, the specific performance of any particular system is unknown before the system is tested. The development of an objective evaluation method that is not based on experimentation would facilitate the optimization of multipinhole systems. We derive a figure of merit for prediction of SPECT system performance based on the entire singular value spectrum of the system. This figure of merit contains significantly more information than the condition number of the system, and is therefore more revealing of system performance. This figure is then compared with simulated results of several SPECT systems and is shown to correlate well to the results of the simulations. The proposed figure of merit is useful for predicting system performance, but additional steps could be taken to improve its accuracy and applicability. The limits of the proposed method are discussed, and possible improvements to it are proposed.

  20. SVD-based evaluation of multiplexing in multipinhole SPECT systems.

    Science.gov (United States)

    Jorgensen, Aaron K; Zeng, Gengsheng L

    2008-01-01

    Multipinhole SPECT system design is largely a trial-and-error process. General principles can give system designers a general idea of how a system with certain characteristics will perform. However, the specific performance of any particular system is unknown before the system is tested. The development of an objective evaluation method that is not based on experimentation would facilitate the optimization of multipinhole systems. We derive a figure of merit for prediction of SPECT system performance based on the entire singular value spectrum of the system. This figure of merit contains significantly more information than the condition number of the system, and is therefore more revealing of system performance. This figure is then compared with simulated results of several SPECT systems and is shown to correlate well to the results of the simulations. The proposed figure of merit is useful for predicting system performance, but additional steps could be taken to improve its accuracy and applicability. The limits of the proposed method are discussed, and possible improvements to it are proposed.

  1. A Knowledge-Based Manufacturing System Using OSAM

    Science.gov (United States)

    Desai, D. K.; Pal, S.; Navathe, S. B.; Doty, K. L.

    1989-02-01

    Manufacturing industries have greatly emphasized the need to "integrate" various manufacturing functions-Design, Planning, and Business Operations- into a unified and well coordinated system, so as to increase productivity. In order to achieve this goal, the various CAD/CAM systems must have a common engineering and manufacturing knowledge base. We propose a Knowledge Based Manufacturing System(KBMS) that will help the Manufacturing Engineer(ME) to directly model the workcell environment. The system consists of two main modules: the Workcell Modelling Facility and the Task Planner. The Workcell Modelling Facility helps the ME to create workcell models using the workcell components, product parts, and manufacturing operations contained in a pre-defined knowledge base. The system also allows the manufacturing engineer to add information to the existing knowledge bases schemas. The Task Planner accesses these knowledge bases to generate a network of proposed actions from a given production goal. Integration of the proposed KBMS with a Geometric Modelling System will provide the ME with a tool to perform off-line animation of the Manufacturing Process in a particular workcell model. A prototype KBMS is currently being implemented at the University of Florida using the Object-oriented Semantic Association Model(OSAM*) as the underlying data model for the Knowledge Bases. OSAM* provides the object-oriented features of inheritance and encapsulation of data, as well as the ability to represent complex relationships between object classes in semantic nets.

  2. Simulation Based Optimization for World Line Card Production System

    Directory of Open Access Journals (Sweden)

    Sinan APAK

    2012-07-01

    Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

  3. ARTIFICIAL NEURAL NETWORKS BASED GEARS MATERIAL SELECTION HYBRID INTELLIGENT SYSTEM

    Institute of Scientific and Technical Information of China (English)

    X.C. Li; W.X. Zhu; G. Chen; D.S. Mei; J. Zhang; K.M. Chen

    2003-01-01

    An artificial neural networks(ANNs) based gear material selection hybrid intelligent system is established by analyzing the individual advantages and weakness of expert system (ES) and ANNs and the applications in material select of them. The system mainly consists of tow parts: ES and ANNs. By being trained with much data samples,the back propagation (BP) ANN gets the knowledge of gear materials selection, and is able to inference according to user input. The system realizes the complementing of ANNs and ES. Using this system, engineers without materials selection experience can conveniently deal with gear materials selection.

  4. Research on urban land information system based on GIS

    Institute of Scientific and Technical Information of China (English)

    LI Liang-bao; ZOU Zhi-chong

    2006-01-01

    Urban land utilization plays an important role in city development. We establish the "Urban Land Information System based on GIS" in order to inspect urban land structure and utilize a model automatically. A series of codes abstracted from urban land sustainable utilization significance are used as measures in land inspection. GIS tools combined with "Urban Land Information System" make visible codes calculations and statistical results possible. Useful mathematic methods are cited to analyze the degree urban land sustainable and optimize land structure. By scientific system analysis, relationships among modules and system structure are illustrated clearly. As a result this study has drawn out the "Urban Land Information System" model.

  5. Development of sensor system for indoor location based service implementation

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Joo Heon; Lee, Kyung Ho [Kookmin Univ., Seoul (Korea, Republic of)

    2012-11-15

    This paper introduces a sensor system based on indoor locations in order to implement the Building Energy Management System. This system consists of a thermopile sensor and an ultrasonic sensor. The sensor module is rotated by 360 .deg. and yawed up and down by two electric motors. Therefore, it can simultaneously detect the number and location of the inhabitants in the room. It uses wireless technology to communicate with the building manager or the smart home server, and it can save electric energy by controlling the lighting system or heating/air conditioning equipment automatically. We also demonstrate the usefulness of the proposed system by applying it to a real environment.

  6. A large workspace flexure hinge-based parallel manipulator system

    Institute of Scientific and Technical Information of China (English)

    Dong Wei; Du Zhijiang; Sun Lining

    2005-01-01

    Parallel manipulator systems as promising precision devices are used widely in current researches. A novel large workspace flexure parallel manipulator system utilizing wide-range flexure hinges as passive joints is proposed in this paper, which can attain sub-micron-scale precision over the cubic centimeter motion range. This paper introduces the mechanical system architecture based on the wide-range flexure hinges, analyzes the kinematics via stiffness matrices, presents the control system configuration and control strategy, and finally gives the system performance test results.

  7. Implementation of a new memristor-based multiscroll hyperchaotic system

    Indian Academy of Sciences (India)

    CHUNHUA WANG; HU XIA; LING ZHOU

    2017-02-01

    In this paper, a new type of flux-controlled memristor model with fifth-order flux polynomials is presented. An equivalent circuit which realizes the action of higher-order flux-controlled memristor is also proposed. We use the memristor model to establish a memristor-based four-dimensional (4D) chaotic system, which can generate three-scroll chaotic attractor. By adjusting the system parameters, the proposed chaotic system performs hyperchaos. Phase portraits, Lyapunov exponents, bifurcation diagram, equilibrium points and stability analysis have been used to research the basic dynamics of this chaotic system. The consistency of circuit implementation and numerical simulation verifies the effectiveness of the system design.

  8. Control of Unknown Chaotic Systems Based on Neural Predictive Control

    Institute of Scientific and Technical Information of China (English)

    LI Dong-Mei; WANG Zheng-Ou

    2003-01-01

    We introduce the predictive control into the control of chaotic system and propose a neural networkcontrol algorithm based on predictive control. The proposed control system stabilizes the chaotic motion in an unknownchaotic system onto the desired target trajectory. The proposed algorithm is simple and its convergence speed is muchhigher than existing similar algorithms. The control system can control hyperchaos. We analyze the stability of thecontrol system and prove the convergence property of the neural controller. The theoretic derivation and simulationsdemonstrate the effectiveness of the algorithm.

  9. Control of Unknown Chaotic Systems Based on Neural Predictive Control

    Institute of Scientific and Technical Information of China (English)

    LIDong-Mei; WANGZheng-Ou

    2003-01-01

    We introduce the predictive control into the control of chaotic system and propose a neural network control algorithm based on predictive control. The proposed control system stabilizes the chaotic motion in an unknown chaotic system onto the desired target trajectory. The proposed algorithm is simple and its convergence speed is much higher than existing similar algorithms. The control system can control hyperchaos. We analyze the stability of the control system and prove the convergence property of the neural controller. The theoretic derivation and simulations demonstrate the effectiveness of the algorithm.

  10. Using a Web-Based Portfolio Assessment System to Elevate Project-Based Learning Performances

    Science.gov (United States)

    Chang, Chi-Cheng; Tseng, Kuo-Hung

    2011-01-01

    This study examines the effect of a Web-based portfolio assessment system on the performances of students undertaking project-based learning (PBL). The research targets were 60 students from two grade-8 classes taking senior high school computer courses. The experimental group comprised 30 students, who used the system to perform PBL and…

  11. Data bases and data base systems related to NASA's Aerospace Program: A bibliography with indexes

    Science.gov (United States)

    1983-01-01

    This bibliography lists 641 reports, articles, and other documents introduced into the NASA scientific and technical information system during the period January 1, 1981 through June 30, 1982. The directory was compiled to assist in the location of numerical and factual data bases and data base handling and management systems.

  12. Image-based fingerprint verification system using LabVIEW

    Directory of Open Access Journals (Sweden)

    Sunil K. Singla

    2008-09-01

    Full Text Available Biometric-based identification/verification systems provide a solution to the security concerns in the modern world where machine is replacing human in every aspect of life. Fingerprints, because of their uniqueness, are the most widely used and highly accepted biometrics. Fingerprint biometric systems are either minutiae-based or pattern learning (image based. The minutiae-based algorithm depends upon the local discontinuities in the ridge flow pattern and are used when template size is important while image-based matching algorithm uses both the micro and macro feature of a fingerprint and is used if fast response is required. In the present paper an image-based fingerprint verification system is discussed. The proposed method uses a learning phase, which is not present in conventional image-based systems. The learning phase uses pseudo random sub-sampling, which reduces the number of comparisons needed in the matching stage. This system has been developed using LabVIEW (Laboratory Virtual Instrument Engineering Workbench toolbox version 6i. The availability of datalog files in LabVIEW makes it one of the most promising candidates for its usage as a database. Datalog files can access and manipulate data and complex data structures quickly and easily. It makes writing and reading much faster. After extensive experimentation involving a large number of samples and different learning sizes, high accuracy with learning image size of 100 100 and a threshold value of 700 (1000 being the perfect match has been achieved.

  13. MEMS-based Circuits and Systems for Wireless Communication

    CERN Document Server

    Kaiser, Andreas

    2013-01-01

    MEMS-based Circuits and Systems for Wireless Communication provides comprehensive coverage of RF-MEMS technology from device to system level. This edited volume places emphasis on how system performance for radio frequency applications can be leveraged by Micro-Electro-Mechanical Systems (MEMS). Coverage also extends to innovative MEMS-aware radio architectures that push the potential of MEMS technology further ahead.  This work presents a broad overview of the technology from MEMS devices (mainly BAW and Si MEMS resonators) to basic circuits, such as oscillators and filters, and finally complete systems such as ultra-low-power MEMS-based radios. Contributions from leading experts around the world are organized in three parts. Part I introduces RF-MEMS technology, devices and modeling and includes a prospective outlook on ongoing developments towards Nano-Electro-Mechanical Systems (NEMS) and phononic crystals. Device properties and models are presented in a circuit oriented perspective. Part II focusses on ...

  14. Visual Peoplemeter: A Vision-based Television Audience Measurement System

    Directory of Open Access Journals (Sweden)

    SKELIN, A. K.

    2014-11-01

    Full Text Available Visual peoplemeter is a vision-based measurement system that objectively evaluates the attentive behavior for TV audience rating, thus offering solution to some of drawbacks of current manual logging peoplemeters. In this paper, some limitations of current audience measurement system are reviewed and a novel vision-based system aiming at passive metering of viewers is prototyped. The system uses camera mounted on a television as a sensing modality and applies advanced computer vision algorithms to detect and track a person, and to recognize attentional states. Feasibility of the system is evaluated on a secondary dataset. The results show that the proposed system can analyze viewer's attentive behavior, therefore enabling passive estimates of relevant audience measurement categories.

  15. Model-Based Dependability Analysis of Physical Systems with Modelica

    Directory of Open Access Journals (Sweden)

    Andrea Tundis

    2017-01-01

    Full Text Available Modelica is an innovative, equation-based, and acausal language that allows modeling complex physical systems, which are made of mechanical, electrical, and electrotechnical components, and evaluates their design through simulation techniques. Unfortunately, the increasing complexity and accuracy of such physical systems require new, more powerful, and flexible tools and techniques for evaluating important system properties and, in particular, the dependability ones such as reliability, safety, and maintainability. In this context, the paper describes some extensions of the Modelica language to support the modeling of system requirements and their relationships. Such extensions enable the requirement verification analysis through native constructs in the Modelica language. Furthermore, they allow exporting a Modelica-based system design as a Bayesian Network in order to analyze its dependability by employing a probabilistic approach. The proposal is exemplified through a case study concerning the dependability analysis of a Tank System.

  16. Usability Evaluation of a Web-Based Learning System

    Science.gov (United States)

    Nguyen, Thao

    2012-01-01

    The paper proposes a contingent, learner-centred usability evaluation method and a prototype tool of such systems. This is a new usability evaluation method for web-based learning systems using a set of empirically-supported usability factors and can be done effectively with limited resources. During the evaluation process, the method allows for…

  17. Cross-layer utility-based system optimization

    NARCIS (Netherlands)

    Ditzel, M.; Kester, L.J.H.M.; Broek, S.P. van den; Rijn, M. van

    2013-01-01

    Multilevel fusion systems need provisions to optimally schedule scarce processing and communication resources. To this end, we explore the idea of using utility-based metrics to optimize the run-time operation of a computation and communication constrained multilevel system, including automatic deci

  18. Smart Waste Collection System Based on Location Intelligence

    DEFF Research Database (Denmark)

    Lopez, Jose Manuel Guterrez Lopez; Jensen, Michael; Andreasen, Morten Henius

    2015-01-01

    (IoT) integration with data access networks, Geographic Information Systems (GIS), combinatorial optimization, and electronic engineering can contribute to improve cities’ management systems. We present a waste collection solution based on providing intelligence to trashcans, by using an IoT prototype...

  19. An Interlingua-Based Chinese-English MT System

    Institute of Scientific and Technical Information of China (English)

    齐璇; 周会平; 陈火旺

    2002-01-01

    Chinese-English machine translation is a significant and challenging problem in information processing. The paper presents an interlingua-based Chinese-English natural language translation system (ICENT). It introduces the realization mechanism of Chinese language analysis, which contains syntactic parsing and semantic analyzing and gives the design of interlingua in details. Experimental results and system evaluation are given. The result is satisfying.

  20. Shuttle Program Information Management System (SPIMS) data base

    Science.gov (United States)

    1983-01-01

    The Shuttle Program Information Management System (SPIMS) is a computerized data base operations system. The central computer is the CDC 170-730 located at Johnson Space Center (JSC), Houston, Texas. There are several applications which have been developed and supported by SPIMS. A brief description is given.

  1. Predicting Garden Path Sentences Based on Natural Language Understanding System

    Directory of Open Access Journals (Sweden)

    DU Jia-li

    2012-12-01

    Full Text Available Natural language understanding (NLU focusing onmachine reading comprehension is a branch of natural language processing (NLP. The domain of the developing NLU system covers from sentence decoding to text understanding and the automatic decoding of GP sentence belongs to the domain of NLU system. GP sentence is a special linguistic phenomenon in which processing breakdown and backtracking are two key features. Ifthe syntax-based system can present the special features of GP sentence and decode GP sentence completely and perfectly, NLU system can improve the effectiveness and develop the understanding skill greatly. On the one hand, by means of showing Octav Popescu’s model of NLU system, we argue that the emphasis on the integration of syntactic, semantic and cognitive backgrounds in system is necessary. On the other hand, we focus on the programming skill of IF-THEN-ELSE statement used in N-S flowchart and highlight the function of context free grammar (CFG created to decode GP sentence. On the basis of example-based analysis, we reach the conclusion that syntaxbased machine comprehension is technically feasible and semantically acceptable, and that N-S flowchart and CFG can help NLU system present the decoding procedure of GP sentence successfully. In short, syntax-based NLU system can bring a deeper understanding of GP sentence and thus paves the way for further development of syntax-based natural language processing and artificial intelligence.

  2. Managing RPM-Based Systems with Kickstart and Yum

    CERN Document Server

    McCallum, Ethan

    2007-01-01

    Managing multiple Red Hat-based systems can be easy--with the right tools. The yum package manager and the Kickstart installation utility are full of power and potential for automatic installation, customization, and updates. Here's what you need to know to take control of your systems.

  3. An Intelligent Agent Based on Virtual Geographic Environment System

    Institute of Scientific and Technical Information of China (English)

    SHEN Dayong; LIN Hui; GONG Jianhua; ZHAO Yibin; FANG Zhaobao; GUO Zhongyang

    2004-01-01

    On the basis of previous work, this paper designs an intelligent agent based on virtual geographic environment (VGE) system that is characterized by huge data, rapid computation, multi-user, multi-thread and intelligence and issues challenges to traditional GIS models and algorithms. The new advances in software and hardware technology lay a reliable basis for system design, development and application.

  4. Synchronization for the uplink of OFDMA-based System

    DEFF Research Database (Denmark)

    Nguyen, Huan Cong

    2008-01-01

    are designed for single-user system, and therefore are not able to correct multiple CFOs in the uplink. The aim of this thesis is to provide practical solutions  for the synchronization issues occurring in the uplink of the OFDMA-based broadband wireless systems.  Several data-aided CFO estimation algorithms...

  5. Research of database-based modeling for mining management system

    Institute of Scientific and Technical Information of China (English)

    WU Hai-feng; JIN Zhi-xin; BAI Xi-jun

    2005-01-01

    Put forward the method to construct the simulation model automatically with database-based automatic modeling(DBAM) for mining system. Designed the standard simulation model linked with some open cut Pautomobile dispatch system. Analyzed and finded out the law among them, and designed model maker to realize the automatic programming of the new model program.

  6. [A wireless mobile monitoring system based on bluetooth technology].

    Science.gov (United States)

    Sun, Shou-jun; Wu, Kai; Wu, Xiao-Ming

    2006-09-01

    This paper presents a wireless mobile monitoring system based on Bluetooth technology. This system realizes the remote mobile monitoring of multiple physiological parameters, and has the characters of easy use, low cost, good reliability and strong capability of anti-jamming.

  7. An Applet-based Anonymous Distributed Computing System.

    Science.gov (United States)

    Finkel, David; Wills, Craig E.; Ciaraldi, Michael J.; Amorin, Kevin; Covati, Adam; Lee, Michael

    2001-01-01

    Defines anonymous distributed computing systems and focuses on the specifics of a Java, applet-based approach for large-scale, anonymous, distributed computing on the Internet. Explains the possibility of a large number of computers participating in a single computation and describes a test of the functionality of the system. (Author/LRW)

  8. Monolithic natural gas storage delivery system based on sorbents

    Energy Technology Data Exchange (ETDEWEB)

    Hornbostel, Marc; Krishnan, Gopala N.; Sanjurjo, Angel

    2016-09-27

    The invention provides methods for producing a strong, light, sorbent-based storage/dispenser system for gases and fuels. The system comprises a porous monolithic material with an adherent strong impervious skin that is capable of storing a gas under pressure in a safe and usable manner.

  9. Food Safety Monitoring System Design Based on WIA-PA

    Directory of Open Access Journals (Sweden)

    Lin Tang

    2015-05-01

    Full Text Available The study designed a food safety monitoring network system which is composed of the wireless sensor network and MCU based on the emerging wireless communication technology. Tests indicate that the system runs well with small consumption and good mobility and the data can be uploaded to host computer for real-time display and record.

  10. A Situated Cultural Festival Learning System Based on Motion Sensing

    Science.gov (United States)

    Chang, Yi-Hsing; Lin, Yu-Kai; Fang, Rong-Jyue; Lu, You-Te

    2017-01-01

    A situated Chinese cultural festival learning system based on motion sensing is developed in this study. The primary design principle is to create a highly interactive learning environment, allowing learners to interact with Kinect through natural gestures in the designed learning situation to achieve efficient learning. The system has the…

  11. Towards a web-based system for family health record.

    Science.gov (United States)

    Marceglia, Sara; Bonacina, Stefano; Braidotti, Andrea; Nardelli, Marco; Pinciroli, Francesco

    2006-01-01

    Electronic health records are a fundamental support needed not only by healthcare providers, but also for individual patients. We considered the health management in the familiar environment and we developed a web-based system for family health record. The system permits an easy compilation and provides an effective visualization of the clinical data concerning family members also for friendly printing tasks.

  12. FPGA based Control of a Production Cell System

    NARCIS (Netherlands)

    Groothuis, Marcel A.; Zuijlen, van Jasper J.P.; Broenink, Jan F.

    2008-01-01

    Most motion control systems for mechatronic systems are implemented on digital computers. In this paper we present an FPGA based solution implemented on a low cost Xilinx Spartan III FPGA. A Production Cell setup with multiple parallel operating units is chosen as a test case. The embedded control s

  13. A power-based perspective of mechanical systems

    NARCIS (Netherlands)

    Jeltsema, D.; Scherpen, J. M. A.

    2005-01-01

    This paper is concerned with the construction of a power-based modeling framework for a large class of mechanical systems. Mathematically this is formalized by proving that every standard mechanical system (with or without dissipation) can be written as a gradient vector field with respect to an ind

  14. A Novel Fisheye-Lens-Based Photoacoustic System

    Science.gov (United States)

    Choi, Hojong; Ryu, Jaemyung; Kim, Jungsuk

    2016-01-01

    This paper presents a novel fisheye-lens-based photoacoustic (PA) system. In conventional PA systems, mechanical motors are utilized to obtain the target information due to the small fields of view of such systems. The use of such motors introduces mechanical noise, which is difficult to remove when processing the echo signals. A fisheye lens system offering a wide field of view would effectively reduce the motor effects (i.e., the noise) and enable the system to have a wide field of view. Therefore, in this work, we propose a novel fisheye lens scheme and describe a PA system based on the developed lens scheme. In addition, to confirm the feasibility of the fisheye-lens-based PA system, we present the typical pulse-echo responses obtained using a 20 MHz single element immersion transducer and the echo signals measured from bull’s eye tissue samples separated by approximately 4, 6, 8, and 10 cm diagonally and 2 cm vertically from the fisheye lens. The experimental results demonstrate that the echo signal amplitudes, their center frequencies, and the −6 dB bandwidths obtained using red, green, and blue lights and a fisheye lens are acceptable when the fisheye lens is separated from a sample both diagonally and vertically. Therefore, fisheye-lens-based PA systems could be a potential method of achieving wide fields of view while reducing the mechanical motor effects. PMID:27999376

  15. Revisiting anomaly-based network intrusion detection systems

    NARCIS (Netherlands)

    Bolzoni, Damiano

    2009-01-01

    Intrusion detection systems (IDSs) are well-known and widely-deployed security tools to detect cyber-attacks and malicious activities in computer systems and networks. A signature-based IDS works similar to anti-virus software. It employs a signature database of known attacks, and a successful match

  16. Model-based safety architecture framework for complex systems

    NARCIS (Netherlands)

    Schuitemaker, K.; Rajabalinejad, M.; Braakhuis, J.G.; Podofilini, Luca; Sudret, Bruno; Stojadinovic, Bozidar; Zio, Enrico; Kröger, Wolfgang

    2015-01-01

    The shift to transparency and rising need of the general public for safety, together with the increasing complexity and interdisciplinarity of modern safety-critical Systems of Systems (SoS) have resulted in a Model-Based Safety Architecture Framework (MBSAF) for capturing and sharing architectural

  17. View-Based Searching Systems--Progress Towards Effective Disintermediation.

    Science.gov (United States)

    Pollitt, A. Steven; Smith, Martin P.; Treglown, Mark; Braekevelt, Patrick

    This paper presents the background and then reports progress made in the development of two view-based searching systems--HIBROWSE for EMBASE, searching Europe's most important biomedical bibliographic database, and HIBROWSE for EPOQUE, improving access to the European Parliament's Online Query System. The HIBROWSE approach to searching promises…

  18. An embedded Video Transmission System Based on H.264

    Institute of Scientific and Technical Information of China (English)

    GAO Jing-min; LAN Ya-zhu

    2009-01-01

    In this paper,an embedded Video Transmission System based on H.264 is proposed.In this system,the latest video compression standards-H.264 is used as video codec algorithm,the i.mx27 is used as the center processors of the system,embedded Linux is used as the operating system and RTP/UDP is used as the network transmission protocol.The paper introduces the design way and the frame of the system.The test results of the system show that the proposed system can support good quality transmission of the video information.The parameters with the transmission are D1,720*480,30fps and 4Mbps.In addition,in order to ensure the security of the video information in the transmission,the system provides the encryption to the information in the process of compressing.

  19. Securing the Global Airspace System Via Identity-Based Security

    Science.gov (United States)

    Ivancic, William D.

    2015-01-01

    Current telecommunications systems have very good security architectures that include authentication and authorization as well as accounting. These three features enable an edge system to obtain access into a radio communication network, request specific Quality-of-Service (QoS) requirements and ensure proper billing for service. Furthermore, the links are secure. Widely used telecommunication technologies are Long Term Evolution (LTE) and Worldwide Interoperability for Microwave Access (WiMAX) This paper provides a system-level view of network-centric operations for the global airspace system and the problems and issues with deploying new technologies into the system. The paper then focuses on applying the basic security architectures of commercial telecommunication systems and deployment of federated Authentication, Authorization and Accounting systems to provide a scalable, evolvable reliable and maintainable solution to enable a globally deployable identity-based secure airspace system.

  20. A primitive-based 3D object recognition system

    Science.gov (United States)

    Dhawan, Atam P.

    1988-01-01

    An intermediate-level knowledge-based system for decomposing segmented data into three-dimensional primitives was developed to create an approximate three-dimensional description of the real world scene from a single two-dimensional perspective view. A knowledge-based approach was also developed for high-level primitive-based matching of three-dimensional objects. Both the intermediate-level decomposition and the high-level interpretation are based on the structural and relational matching; moreover, they are implemented in a frame-based environment.

  1. Knowledge-Based Entrepreneurship in a Boundless Research System

    Science.gov (United States)

    Dell'Anno, Davide

    2008-01-01

    International entrepreneurship and knowledge-based entrepreneurship have recently generated considerable academic and non-academic attention. This paper explores the "new" field of knowledge-based entrepreneurship in a boundless research system. Cultural barriers to the development of business opportunities by researchers persist in some academic…

  2. A Cataloguing System for Machine Readable Data Bases.

    Science.gov (United States)

    Lauterbach, Guy

    With the fantastic growth in computerized data processing and management, there arises a great need for improved techniques in cataloging of machine readable data bases. The purpose of this report is to define a system by which computerized data bases may be cataloged for easy reference and availability. Developed from a computer scientist's…

  3. Extending a Hybrid Tag-Based Recommender System with Personalization

    DEFF Research Database (Denmark)

    Durao, Frederico; Dolog, Peter

    2010-01-01

    extension for a hybrid tag-based recommender system, which suggests similar Web pages based on the similarity of their tags. The semantic extension aims at discovering tag relations which are not considered in basic syntax similarity. With the goal of generating more semantically grounded recommendations...

  4. Cache-based memory copy hardware accelerator for multicore systems

    NARCIS (Netherlands)

    Duarte, F.; Wong, S.

    2010-01-01

    In this paper, we present a new architecture of the cache-based memory copy hardware accelerator in a multicore system supporting message passing. The accelerator is able to accelerate memory data movements, in particular memory copies. We perform an analytical analysis based on open-queuing theory

  5. Agent-based modelling of socio-technical systems

    CERN Document Server

    van Dam, Koen H; Lukszo, Zofia

    2012-01-01

    Here is a practical introduction to agent-based modelling of socio-technical systems, based on methodology developed at TU Delft, which has been deployed in a number of case studies. Offers theory, methods and practical steps for creating real-world models.

  6. A Quarter Active Suspension System Based Ground-Hook Controller

    OpenAIRE

    Turnip Arjon

    2016-01-01

    An alternative design technique for active suspension system of vehicle using a developved ground-hook damping system as a reference is proposed. The controller parameters are determined using Lyapunov method and can be tuned to precisely achieve the type of desired response which given by reference model. The simulation result show that the designed active suspension system based ground-hook reference model is able to significantly improve the ride comfort and the road holding compared with ...

  7. Generalized rough sets based on neighborhood systems and topological spaces

    Directory of Open Access Journals (Sweden)

    R. Mareay

    2016-10-01

    Full Text Available Rough sets theory is an important method for dealing with uncertainty, fuzziness and undefined objects. In this paper, we introduce a new approach for generalized rough sets based on the neighborhood systems induced by an arbitrary binary relation. Four pairs of the dual approximation operators are generated from the core of neighborhood systems. Relationship among different approximation operators are presented. We generate different topological spaces by using the core of these neighborhood systems. Relationship among different generated topologies are discussed.

  8. Secure electronic commerce communication system based on CA

    Science.gov (United States)

    Chen, Deyun; Zhang, Junfeng; Pei, Shujun

    2001-07-01

    In this paper, we introduce the situation of electronic commercial security, then we analyze the working process and security for SSL protocol. At last, we propose a secure electronic commerce communication system based on CA. The system provide secure services such as encryption, integer, peer authentication and non-repudiation for application layer communication software of browser clients' and web server. The system can implement automatic allocation and united management of key through setting up the CA in the network.

  9. Building a 3D scanner system based on monocular vision.

    Science.gov (United States)

    Zhang, Zhiyi; Yuan, Lin

    2012-04-10

    This paper proposes a three-dimensional scanner system, which is built by using an ingenious geometric construction method based on monocular vision. The system is simple, low cost, and easy to use, and the measurement results are very precise. To build it, one web camera, one handheld linear laser, and one background calibration board are required. The experimental results show that the system is robust and effective, and the scanning precision can be satisfied for normal users.

  10. A fully automatic system for acid-base coulometric titrations

    OpenAIRE

    1990-01-01

    An automatic system for acid-base titrations by electrogeneration of H+ and OH- ions, with potentiometric end-point detection, was developed. The system includes a PC-compatible computer for instrumental control, data acquisition and processing, which allows up to 13 samples to be analysed sequentially with no human intervention. The system performance was tested on the titration of standard solutions, which it carried out with low errors and RSD. It was subsequently applied to the analysis o...

  11. A fast DSP-based calorimeter hit scanning system

    Energy Technology Data Exchange (ETDEWEB)

    Sekikawa, S.; Arai, I.; Suzuki, A.; Watanabe, A. [Tsukuba Univ., Ibaraki (Japan). Inst. of Phys.; Kuno, Y. [Department of Physics, National Laboratory for High Energy (KEK), Tsukuba, Ibaraki 305 (Japan); Marlow, D.R.; Mindas, C.R.; Wixted, R.L. [Physics Department, Princeton University, Princeton, NJ (United States)

    1997-08-11

    A custom made digital signal processor (DSP) based system has been developed to scan calorimeter hits read by a 32-channel FASTBUS waveform recorder board. The scanner system identifies hit calorimeter elements by surveying their discriminated outputs. This information is used to generate a list of addresses, which guides the read-out process. The system is described and measurements of the scan times are given. (orig.).

  12. Model-based analysis of control performance in sewer systems

    DEFF Research Database (Denmark)

    Mollerup, Ane Høyer; Mauricio Iglesias, Miguel; Johansen, N.B.;

    2012-01-01

    Design and assessment of control in wastewater systems has to be tackled at all levels, including supervisory and regulatory level. We present here an integrated approach to assessment of control in sewer systems based on modelling and the use of process control tools to assess the controllability...... of the process. A case study of a subcatchment area in Copenhagen (Denmark) is used to illustrate the combined approach in modelling of the system and control assessment....

  13. Hydrological Monitoring System Design and Implementation Based on IOT

    Science.gov (United States)

    Han, Kun; Zhang, Dacheng; Bo, Jingyi; Zhang, Zhiguang

    In this article, an embedded system development platform based on GSM communication is proposed. Through its application in hydrology monitoring management, the author makes discussion about communication reliability and lightning protection, suggests detail solutions, and also analyzes design and realization of upper computer software. Finally, communication program is given. Hydrology monitoring system from wireless communication network is a typical practical application of embedded system, which has realized intelligence, modernization, high-efficiency and networking of hydrology monitoring management.

  14. Model-based design of adaptive embedded systems

    CERN Document Server

    Hamberg, Roelof; Reckers, Frans; Verriet, Jacques

    2013-01-01

    Today’s embedded systems have to operate in a wide variety of dynamically changing environmental circumstances. Adaptivity, the ability of a system to autonomously adapt itself, is a means to optimise a system’s behaviour to accommodate changes in its environment. It involves making in-product trade-offs between system qualities at system level. The main challenge in the development of adaptive systems is keeping control of the intrinsic complexity of such systems while working with multi-disciplinary teams to create different parts of the system. Model-Based Development of Adaptive Embedded Systems focuses on the development of adaptive embedded systems both from an architectural and methodological point of view. It describes architectural solution patterns for adaptive systems and state-of-the-art model-based methods and techniques to support adaptive system development. In particular, the book describes the outcome of the Octopus project, a cooperation of a multi-disciplinary team of academic and indus...

  15. Bluetooth-based authentication system for ambient intelligence

    Institute of Scientific and Technical Information of China (English)

    Jian HE; Hui LI; Yong ZHANG; Zhang-qin HUANG

    2008-01-01

    According to the requirement of natural human-computer interaction for Ambient Intelligence (AmI), a Bluetooth-based authentication technique is provided. An authentication network combining advantages of Bluetooth ad hoc network with the Ethernet is introduced first in detail. Then we propose a Bluetooth badge for storing the user's identification information. Finally, the authentication system based on Bluetooth badge and authentication network is introduced. It is demonstrated experimentally that the Bluetooth-based authentication technique can authenticate the user automatically.

  16. Spectral Efficiency Analysis for Multicarrier Based 4G Systems

    DEFF Research Database (Denmark)

    Silva, Nuno; Rahman, Muhammad Imadur; Frederiksen, Flemming Bjerge;

    2006-01-01

    In this paper, a spectral efficiency definition is proposed. Spectral efficiency for multicarrier based multiaccess techniques, such as OFDMA, MC-CDMA and OFDMA-CDM, is analyzed. Simulations for different indoor and outdoor scenarios are carried out. Based on the simulations, we have discussed ho...... different wireless channel’s condition affects the performance of a system in terms of spectral efficiency. Based on our analysis, we have also recommended different access techniques for different scenarios....

  17. Benefits of a Space-Based Group System Architecture

    Science.gov (United States)

    2015-06-01

    market today allow for dual transmission on these frequencies. The router examined in this research was the Asus RT-AC68U, based on a top pick by...determined based on a default assumption that the payload was approximately 26 percent of the total spacecraft weight. The space segment portion of the...SPACE- BASED GROUP SYSTEM ARCHITECTURE by Brandon J. Colvin June 2015 Thesis Advisor: Charles Racoosin Co-Advisor William Welch THIS

  18. Global point tracking based panoramic image stabilization system

    Institute of Scientific and Technical Information of China (English)

    朱娟娟; 郭宝龙; 吴宪祥

    2009-01-01

    A novel image stabilization system is presented,which consists of a global feature point tracking based motion estimation,a Kalman filtering based motion smoothing and an image mosaic based panoramic compensation.The global motion is estimated using feature point matching and iteration with the least-square method.Then,the Kalman filter is applied to smooth the original motion vectors to effectively alleviate unwanted camera vibrations and follow the intentional camera scan.Lastly,the loss information of im...

  19. Water System Architectures for Moon and Mars Bases

    Science.gov (United States)

    Jones, Harry W.; Hodgson, Edward W.; Kliss, Mark H.

    2015-01-01

    Water systems for human bases on the moon and Mars will recycle multiple sources of wastewater. Systems for both the moon and Mars will also store water to support and backup the recycling system. Most water system requirements, such as number of crew, quantity and quality of water supply, presence of gravity, and surface mission duration of 6 or 18 months, will be similar for the moon and Mars. If the water system fails, a crew on the moon can quickly receive spare parts and supplies or return to Earth, but a crew on Mars cannot. A recycling system on the moon can have a reasonable reliability goal, such as only one unrecoverable failure every five years, if there is enough stored water to allow time for attempted repairs and for the crew to return if repair fails. The water system that has been developed and successfully operated on the International Space Station (ISS) could be used on a moon base. To achieve the same high level of crew safety on Mars without an escape option, either the recycling system must have much higher reliability or enough water must be stored to allow the crew to survive the full duration of the Mars surface mission. A three loop water system architecture that separately recycles condensate, wash water, and urine and flush can improve reliability and reduce cost for a Mars base.

  20. Communication-based positioning systems: past, present and prospects

    Institute of Scientific and Technical Information of China (English)

    Guan-Yi Ma; Qing-Tao Wan; Tong Gan

    2012-01-01

    This paper reviews positioning systems in the context of communication systems.First,the basic positioning technique is described for location based service (LBS) in mobile communication systems.Then the high integrity global positioning system (iGPS) is introduced in terms of aspects of what it is and how the low Earth orbit (LEO) Iridium telecommunication satellites enhance the global positioning system (GPS).Emphasis is on the Chinese Area Positioning System (CAPS) which is mainly based on commercial geostationary (GEO) communication satellites,including decommissioned GEO and inclined geosynchronous communication satellites.Characterized by its low cost,high flexibility,wide-area coverage and ample frequency resources,a distinctive feature of CAPS is that its navigation messages are generated on the ground,then uploaded to and forwarded by the communication satellites.Fundamental principles and key technologies applied in the construction of CAPS are presented in detail from the CAPS validation phase to its experimental system setup.A prospective view of CAPS has concluded it to be a seamless,high accuracy,large capacity navigation and communication system which can be achieved by expanding it world wide and enhancing it with LEO satellites and mobile base stations.Hence,this system is a potential candidate for the next generation of radio navigation after GPS.

  1. Three CLIPS-based expert systems for solving engineering problems

    Science.gov (United States)

    Parkinson, W. J.; Luger, G. F.; Bretz, R. E.

    1990-01-01

    We have written three expert systems, using the CLIPS PC-based expert system shell. These three expert systems are rule based and are relatively small, with the largest containing slightly less than 200 rules. The first expert system is an expert assistant that was written to help users of the ASPEN computer code choose the proper thermodynamic package to use with their particular vapor-liquid equilibrium problem. The second expert system was designed to help petroleum engineers choose the proper enhanced oil recovery method to be used with a given reservoir. The effectiveness of each technique is highly dependent upon the reservoir conditions. The third expert system is a combination consultant and control system. This system was designed specifically for silicon carbide whisker growth. Silicon carbide whiskers are an extremely strong product used to make ceramic and metal composites. The manufacture of whiskers is a very complicated process. which to date. has defied a good mathematical model. The process was run by experts who had gained their expertise by trial and error. A system of rules was devised by these experts both for procedure setup and for the process control. In this paper we discuss the three problem areas of the design, development and evaluation of the CLIPS-based programs.

  2. Communication-based positioning systems: past, present and prospects

    Science.gov (United States)

    Ma, Guan-Yi; Wan, Qing-Tao; Gan, Tong

    2012-06-01

    This paper reviews positioning systems in the context of communication systems. First, the basic positioning technique is described for location based service (LBS) in mobile communication systems. Then the high integrity global positioning system (iGPS) is introduced in terms of aspects of what it is and how the low Earth orbit (LEO) Iridium telecommunication satellites enhance the global positioning system (GPS). Emphasis is on the Chinese Area Positioning System (CAPS) which is mainly based on commercial geostationary (GEO) communication satellites, including decommissioned GEO and inclined geosynchronous communication satellites. Characterized by its low cost, high flexibility, wide-area coverage and ample frequency resources, a distinctive feature of CAPS is that its navigation messages are generated on the ground, then uploaded to and forwarded by the communication satellites. Fundamental principles and key technologies applied in the construction of CAPS are presented in detail from the CAPS validation phase to its experimental system setup. A prospective view of CAPS has concluded it to be a seamless, high accuracy, large capacity navigation and communication system which can be achieved by expanding it world wide and enhancing it with LEO satellites and mobile base stations. Hence, this system is a potential candidate for the next generation of radio navigation after GPS.

  3. An E-Commerce Recommender System Based on Content-Based Filtering

    Institute of Scientific and Technical Information of China (English)

    HE Weihong; CAO Yi

    2006-01-01

    Content-based filtering E-commerce recommender system was discussed fully in this paper. Users' unique features can be explored by means of vector space model firstly. Then based on the qualitative value of products information, the recommender lists were obtained. Since the system can adapt to the users' feedback automatically, its performance were enhanced comprehensively. Finally the evaluation of the system and the experimental results were presented.

  4. Design of Piston Air Compressor Unit Control System based Converter

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Based on the running characteristics and high energy consumption of air compressors in coal mines,an air pressure PID closed loop control system has been designed in this paper.The system is composed of PLC, converter and sensors etc and adopts the control method of converter triple-evaporator which makes air supply"need-based".The designed system has been applied in multiple coal mines and the results show its energy saving is remarkable and potential application is widely.

  5. A Web-based Intelligent Fashion Design System

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A web-based fashion design system-FashDesn was developed for non-professionals to make their own style-based design by choosing and combining fashion parts. We use genetic algorithm to find the optimal satisfied style, while the fitness function of GA is approached by artificial neural network. The users' style intention can be reached through the learning process of the artificial neural network. The system architecture and some realization details of the system are given in the paper. An output contrast for elegant style women's before and after user's interaction is used to illustrate its usefulness in the end.

  6. Control strategies for VSC-based HVDC transmission system

    DEFF Research Database (Denmark)

    Stan, Ana-Irina; Stroe, Daniel Ioan; Silva, Rodrigo Da

    2011-01-01

    Throughout this paper the modeling and control of the VSC-based HVDC systems are investigated and described. Two different control methods capable of controlling such systems are proposed. Both developed control strategies are implemented in the dq synchronous reference frame. In order to analyze...... the behavior of the developed VSC-based HVDC transmission system two study cases are carried out using MATLAB/Simulink. The results obtained from simulations show acceptable performances, of the proposed strategies, when changes in the reference parameters are considered. The active power flow between...... the converters is succesfully achieved while, the independent control of active and reactive power is also verified....

  7. ATCA-based ATLAS FTK input interface system

    CERN Document Server

    Okumura, Y; The ATLAS collaboration; Olsen, J; Iizawa, T; Mitani, T; Korikawa, T; Yorita, K; Annovi, A; Beretta, M; Gatta, M; Sotiropoulou, C; Gkaitatzis, S; Kordas, K; Kimura, N; Cremonesi, M; Yin, H; Xu, Z

    2014-01-01

    The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker must be clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking processors. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over a full-mesh backplane. The board and system level performance studies and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

  8. A Cassette Based System for Hydrogen Storage and Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Britton Wayne E.

    2006-11-29

    A hydrogen storage system is described and evaluated. This is based upon a cassette, that is a container for managing hydrogen storage materials. The container is designed to be safe, modular, adaptable to different chemistries, inexpensive, and transportable. A second module receives the cassette and provides the necessary infrastructure to deliver hydrogen from the cassette according to enduser requirements. The modular concept has a number of advantages over approaches that are all in one stand alone systems. The advantages of a cassette based system are discussed, along with results from model and laboratory testing.

  9. ATCA-based ATLAS FTK input interface system

    CERN Document Server

    Okumura, Yasuyuki; Olsen, Jamieson; Iizawa, Tomoya; Mitani, Takashi; Korikawa, Tomohiro; Yorita, Kohei; Annovi, Alberto; Beretta, Matteo; Gatta, Maurizio; Sotiropoulou, C-L.; Gkaitatzis, Stamatios; Kordas, Konstantinos; Kimura, Naoki; Cremonesi, Matteo; Yin, Hang; Xu, Zijun

    2016-01-01

    The first stage of the ATLAS Fast TracKer (FTK) is an ATCA-based input interface system, where hits from the entire silicon tracker are clustered and organized into overlapping eta-phi trigger towers before being sent to the tracking engines. First, FTK Input Mezzanine cards receive hit data and perform clustering to reduce data volume. Then, the ATCA-based Data Formatter system will organize the trigger tower data, sharing data among boards over full mesh backplanes and optic fibers. The board and system level design concepts and implementation details, as well as the operation experiences from the FTK full-chain testing, will be presented.

  10. Coalmine Safety Assurance Information System Based on GIS

    Institute of Scientific and Technical Information of China (English)

    LIU Qiao-xi; MAO Shan-jun; MA Ai-nai; MAO Yun-de; BAO Qing-guo

    2003-01-01

    The mine ventilation and safety is one of the most important factors to influence on the coal production.More attention has been paid to manage safety information in scientific, efficient, and real-time way. Therefore, it is important to develop a practical mine safety assurance information system (CSAIS). Based on analyzing the actual management mode for ventilation and safety on mine, the paper studies the structure and function of the mine safety assurance information system based on GIS in detail. Moreover, it also suggests some applications and solutions. By combining with the practical situation, the paper realizes the whole function of the present system.

  11. Guidance on Design of Internet-based Process Control Systems

    Institute of Scientific and Technical Information of China (English)

    S.H.YANG; L.YANG

    2005-01-01

    Internet-based process control is becoming new generations of control systems, in which the Internet is used as a platform for global remote monitoring and control. The obvious benefit is to enable global collaboration between operators from geographically dispersed locations, data sharing and data provision for remote monitoring and control. However, connection to an open network and the use of universal technology present new problems that did not exist with the conventional design and construction of control systems, such as time delay and data loss in Internet transmission and security. This paper reviews the latest research results and presents design guidance of Internet based monitoring and control systems.

  12. Research on Direct Torque Control System Based on Induction Motor

    Institute of Scientific and Technical Information of China (English)

    康劲松; 陶生桂; 毛明平

    2003-01-01

    The mathematic model of direct torque control (DTC) was deduced. Two simulating models based on the MATLAB & SIMULINK were established. The emphasis is focused on study of the performance difference of the DTC system with stator flux hexagon and circle trajectories. The simulation waveforms of flux, torque and current characters with two flux trajectories were given. Experiments were carried out in an AC drive system based on induction motor and two-level inverter. A dual-CPU structure was used and the communication with two CPUs was obtained by a dual-port RAM in this system.

  13. Test method on infrared system range based on space compression

    Science.gov (United States)

    Chen, Zhen-xing; Shi, Sheng-bing; Han, Fu-li

    2016-09-01

    Infrared thermal imaging system generates image based on infrared radiation difference between object and background and is a passive work mode. Range is important performance and necessary appraised test item in appraisal test for infrared system. In this paper, aim is carrying out infrared system range test in laboratory , simulated test ground is designed based on object equivalent, background analog, object characteristic control, air attenuation characteristic, infrared jamming analog and so on, repeatable and controllable tests are finished, problem of traditional field test method is solved.

  14. Practical Curriculum Design Based on Food Motoring System of PLC

    Directory of Open Access Journals (Sweden)

    Jie Yang

    2015-03-01

    Full Text Available The study designed a kind of stepping food motoring control system based on PLC and touch screen, complete the secondary design and renovation based on PLC technology. According to the trend that the PLC new technology is widely and deeply applied into modern food industrial production, combining students electrician, maintenance electrician basic skill training needs to make a reformation of the food motoring system of student training curriculum. This system has simple structure, stable performance, economic value, outstanding using effect, remarkable specific design example and expected effect.

  15. Solar combi system based on a mantle tank

    DEFF Research Database (Denmark)

    Yazdanshenas, Eshagh; Furbo, Simon

    2007-01-01

    A solar combisystem based on a mantle tank is investigated numerically and experimentally. Three different houses with four different radiator systems are considered for the simulations. The needed temperature for the auxiliary heater is determined for different houses and radiator systems....... The thermal performance of the solar combisystem is compared to the thermal performance of a solar domestic hot water system based on a mantle tank. In the experimental study, tank temperatures and the heat transfer coefficient for the top mantle for a discharge test is determined. The investigations showed...

  16. PC-Based Applications Programming on the SRS Control System.

    Science.gov (United States)

    Martlew, Brian; Owen, Hywel; Pugh, Martin; Rawlinson, Bill; Smith, Susan

    1997-05-01

    The CERN PC-based ISOLDE control system has been installed at the SRS electron storage ring at Daresbury Laboratory. The use of Windows NT for the control consoles together with PC and VME front-end computers running under several operating systems has resulted in a flexible and reliable system for accelerator control. The implementation and philosophy of control application programs, based around a suite of Microsoft Visual Basic and Excel programs, is described. In particular, the use of Excel to provide adaptable programs online allows rapid generation of new control functions; orbit correction and servoing at the application level are described as examples of this.

  17. Analysis of Host-Based and Network-Based Intrusion Detection System

    Directory of Open Access Journals (Sweden)

    Amrit Pal Singh

    2014-07-01

    Full Text Available Intrusion-detection systems (IDS aim at de-tecting attacks against computer systems and networks or, in general, against information systems. Its basic aim is to protect the system against malwares and unauthorized access of a network or a system. Intrusion Detection is of two types Network-IDS and Host Based- IDS. This paper covers the scope of both the types and their result analysis along with their comparison as stated. OSSEC (HIDS is a free, open source host-base intrusion detection system. It performs log analysis, integrity checking, Windows registry monitoring, rootkit detection, time-based alerting and active response. While Snort (NIDS is a lightweight intrusion detection system that can log packets coming across your network and can alert the user regarding any attack. Both are efficient in their own distinct fields.

  18. Vote Stuffing Control in IPTV-based Recommender Systems

    Science.gov (United States)

    Bhatt, Rajen

    Vote stuffing is a general problem in the functioning of the content rating-based recommender systems. Currently IPTV viewers browse various contents based on the program ratings. In this paper, we propose a fuzzy clustering-based approach to remove the effects of vote stuffing and consider only the genuine ratings for the programs over multiple genres. The approach requires only one authentic rating, which is generally available from recommendation system administrators or program broadcasters. The entire process is automated using fuzzy c-means clustering. Computational experiments performed over one real-world program rating database shows that the proposed approach is very efficient for controlling vote stuffing.

  19. [Web-based support system for medical device maintenance].

    Science.gov (United States)

    Zhao, Jinhai; Hou, Wensheng; Chen, Haiyan; Tang, Wei; Wang, Yihui

    2015-01-01

    A Web-based technology system was put forward aiming at the actual problems of the long maintenance cycle and the difficulties of the maintenance and repairing of medical equipments. Based on analysis of platform system structure and function, using the key technologies such as search engine, BBS, knowledge base and etc, a platform for medical equipment service technician to use by online or offline was designed. The platform provides users with knowledge services and interactive services, enabling users to get a more ideal solution.

  20. System identification based approach to dynamic weighing revisited

    Science.gov (United States)

    Niedźwiecki, Maciej; Meller, Michał; Pietrzak, Przemysław

    2016-12-01

    Dynamic weighing, i.e., weighing of objects in motion, without stopping them on the weighing platform, allows one to increase the rate of operation of automatic weighing systems, used in industrial production processes, without compromising their accuracy. Since the classical identification-based approach to dynamic weighing, based on the second-order mass-spring-damper model of the weighing system, does not yield satisfactory results when applied to conveyor belt type checkweighers, several extensions of this technique are examined. Experiments confirm that when appropriately modified the identification-based approach becomes a reliable tool for dynamic mass measurement in checkweighers.

  1. mage Mining using Content Based Image Retrieval System

    OpenAIRE

    Rajshree S. Dubey; Niket Bhargava; Rajnish Choubey

    2010-01-01

    The image depends on the Human perception and is also based on the Machine Vision System. The Image Retrieval is based on the color Histogram, texture. The perception of the Human System of Image is based on the Human Neurons which hold the 1012 of Information; the Human brain continuously learns with the sensory organs like eye which transmits the Image to the brain which interprets the Image. The research challenge is that how the brain processes the informationin the semantic manner is hot...

  2. Electronic image stabilization system based on global feature tracking

    Institute of Scientific and Technical Information of China (English)

    Zhu Juanjuan; Guo Baolong

    2008-01-01

    A new robust electronic image stabilization system is presented, which involves feature-point, tracking based global motion estimation and Kalman filtering based motion compensation. First, global motion is estimated from the local motions of selected feature points. Considering the local moving objects or the inevitable mismatch,the matching validation, based on the stable relative distance between the points set is proposed, thus maintaining high accuracy and robustness. Next, the global motion parameters are accumulated for correction by Kalman filter-ation. The experimental result illustrates that the proposed system is effective to stabilize translational, rotational,and zooming jitter and robust to local motions.

  3. A Conceptual Framework for Representing Human Behavior Characteristics in a System of Systems Agent-Based Survivability Simulation

    Science.gov (United States)

    2010-11-22

    distribution is unlimited. A CONCEPTUAL FRAMEWORK FOR REPRESENTING HUMAN BEHAVIOR CHARACTERISTICS IN A SYSTEM OF SYSTEMS AGENT-BASED SURVIVABILITY...27411 -0001 ABSTRACT A CONCEPTUAL FRAMEWORK FOR REPRESENTING HUMAN BEHAVIOR CHARACTERISTICS IN A SYSTEM OF SYSTEMS AGENT-BASED SURVIVABILITY SIMULATION...TITLE AND SUBTITLE A CONCEPTUAL FRAMEWORK FOR REPRESENTING HUMAN BEHAVIOR CHARACTERISTICS IN A SYSTEM OF SYSTEMS AGENT-BASED SURVIVABILITY

  4. Wearable Systems for Service based on Physiological Signals.

    Science.gov (United States)

    Ryoo, Dong-Wan; Kim, Young-Sung; Lee, Jeun-Woo

    2005-01-01

    Many researches for useful status information on humans have been done using the bio-signals. The bio-signal acquisition systems can be used to connect a user and a ubiquitous computing environment. The ubiquitous computing environment has to give various services anywhere, anytime. Consequently, ubiquitous computing requires new technology, such as a new user interface, dynamic service mechanism based on context and mobility support, which is different from technology used in desktop environment. To do this, we developed a wearable system, which can sense physiological data, determine emotional status and execute service based on the emotion. In this paper, we described wearable systems for personalized service based on physiological signals. The wearable system is composed of three subsystems, the physiological data sensing subsystem, the human status awareness subsystem and the service management subsystem. The physiological data sensing subsystem senses PPG, GSR and SKT signals from the data glove and sends the data to a wearable system using Bluetooth. The human status awareness subsystem in the wearable system receives the data from bio-sensors and determines emotional status using nonlinear mapping and rule-base. After determining emotion, the service management subsystem activates proper service automatically, and the service management subsystem can provide personalized service for users based on acquired bio-signals. Also, we presented various feature extraction using bio-signals such as PPG, GSR, SKT considering mobility, and emotion recognition of human status for the ubiquitous computing service.

  5. An Ontology Based Approach to Implement the Online Recommendation System

    Directory of Open Access Journals (Sweden)

    Vijayakumar Mohanraj

    2011-01-01

    Full Text Available Problem statement: Every web user has different intent when accessing the information on website. The primary goal of recommendation system is to anticipate the user intent and recommend the web pages that contain user expected information. Effective recommendation of web pages involves two important challenges: accurately identifying the user intent and predict the result show that novel web usage mining method and ontological concept scoring algorithm based on website domain ontological profile helps the recommendation system imminent navigation pattern in such a way that it provides required content while users browse the predicted navigation. Approach: We present a ontology based approach to implement recommendation system that involves applying innovative web usage mining on log system to discover all possible imminent navigation patterns of current user and resolve any uncertainties in discovering the navigation pattern by applying ontological concept based similarity comparison and scoring algorithm. Results: result show that novel web usage mining method and ontological concept scoring algorithm based on website domain ontological profile helps the recommendation system to predict and present most relevant navigation pattern to users. Conclusion: our recommendation system confirms that ontology based approach should be used to ensure excellent accuracy in predicting and capturing future navigation pattern of web user.

  6. A Distributed IP-Based Telecommunication System using SIP

    Directory of Open Access Journals (Sweden)

    Carlton Andre Thompson

    2013-11-01

    Full Text Available Voice over Internet Protocol (VoIP technologies are integral to modern telecommunications because oftheir advanced features, flexibility, and economicbenefits. Internet Service Providers initially promotedthese technologies by providing low cost local andinternational calling. At present, there is also agreatdeal of interest in using IP-based technologies toreplace traditional small and large office telephonesystems that use traditional PBX’s (Private BrancheXchange. Unfortunately, the large majority of theemerging VoIP based office telephone systems have followed the centralized design of traditional publicand private telephone systems in which all the intelligence in the system is at the core, with quite expensivehardware and software components and appropriate redundancy for adequate levels of reliability. In thispaper, it is argued that a centralized model for anIP-based telecommunications system fails to exploit thefull capabilities of Internet-inspired communications and that, very simple, inexpensive, elegant andflexible solutions are possible by deliberately avoiding the centralized approach. This paper describes thedesign, philosophy and implementation of a prototype for a fully distributed IP-based TelecommunicationSystem (IPTS that provides the essential feature set for office and home telecommunications, including IP-based long-distance and local calling, and with thesupport for video as well as data and text. Theprototype system was implemented with an Internet-inspired distributed design using open source software,with appropriate customizations and configurations.

  7. LGBTQ relationally based positive psychology: An inclusive and systemic framework.

    Science.gov (United States)

    Domínguez, Daniela G; Bobele, Monte; Coppock, Jacqueline; Peña, Ezequiel

    2015-05-01

    Positive psychologists have contributed to our understandings of how positive emotions and flexible cognition enhance resiliency. However, positive psychologists' research has been slow to address the relational resources and interactions that help nonheterosexual families overcome adversity. Addressing overlooked lesbian, gay, bisexual, transgender, or queer (LGBTQ) and systemic factors in positive psychology, this article draws on family resilience literature and LGBTQ literature to theorize a systemic positive psychology framework for working with nonheterosexual families. We developed the LGBTQ relationally based positive psychology framework that integrates positive psychology's strengths-based perspective with the systemic orientation of Walsh's (1996) family resilience framework along with the cultural considerations proposed by LGBTQ family literature. We theorize that the LGBTQ relationally based positive psychology framework takes into consideration the sociopolitical adversities impacting nonheterosexual families and sensitizes positive psychologists, including those working in organized care settings, to the systemic interactions of same-sex loving relationships.

  8. Model Based Mission Assurance: Emerging Opportunities for Robotic Systems

    Science.gov (United States)

    Evans, John W.; DiVenti, Tony

    2016-01-01

    The emergence of Model Based Systems Engineering (MBSE) in a Model Based Engineering framework has created new opportunities to improve effectiveness and efficiencies across the assurance functions. The MBSE environment supports not only system architecture development, but provides for support of Systems Safety, Reliability and Risk Analysis concurrently in the same framework. Linking to detailed design will further improve assurance capabilities to support failures avoidance and mitigation in flight systems. This also is leading new assurance functions including model assurance and management of uncertainty in the modeling environment. Further, the assurance cases, a structured hierarchal argument or model, are emerging as a basis for supporting a comprehensive viewpoint in which to support Model Based Mission Assurance (MBMA).

  9. Thermoreversible (Ionic-Liquid-Based) Aqueous Biphasic Systems.

    Science.gov (United States)

    Passos, Helena; Luís, Andreia; Coutinho, João A P; Freire, Mara G

    2016-02-04

    The ability to induce reversible phase transitions between homogeneous solutions and biphasic liquid-liquid systems, at pre-defined and suitable operating temperatures, is of crucial relevance in the design of separation processes. Ionic-liquid-based aqueous biphasic systems (IL-based ABS) have demonstrated superior performance as alternative extraction platforms, and their thermoreversible behaviour is here disclosed by the use of protic ILs. The applicability of the temperature-induced phase switching is further demonstrated with the complete extraction of two value-added proteins, achieved in a single-step. It is shown that these temperature-induced mono(bi)phasic systems are significantly more versatile than classical liquid-liquid systems which are constrained by their critical temperatures. IL-based ABS allow to work in a wide range of temperatures and compositions which can be tailored to fit the requirements of a given separation process.

  10. Zigbee/Google Earth based assisted driving system in mining

    Institute of Scientific and Technical Information of China (English)

    SUN En-ji; NIETO Antonio

    2009-01-01

    The Assisted Driving System (ADS) for haul trucks operating in surface mining and construction sites is to reduce accidents related to low visibility conditions. This system is based on the GPS, Zigbee, and the Google-Earth engine as the graphic interface and mine-mapping server. The system has the capability to pin-point and track vehicles in real time using a 3D interface, which is based on user-based AutoCAD mine maps using the Google-Earth graphics interface. All equipped vehicles are shown in a 3D mine map stored in a local server through a wireless network. When low visibility conditions are present, the system indicates available exit/escape routes for driver safety. The ADS potentially increases reliability and reduces uncertainty in open pit mining operations.

  11. Developing competence based qualification system in the nuclear energy sector

    Energy Technology Data Exchange (ETDEWEB)

    Ceclan, Mihail [European Commission, Petten (Netherlands). Inst. for Energy and Transport

    2016-04-15

    The Institute for Energy and Transport of the Joint Research Centre, European Commission, developed a strategy and road map for ECVET implementation. The JRC road map for European Credit System for Vocational Education and Training (ECVET) implementation has reached the stage of Competence-Based Qualification System development. The Competence-Based Qualification System can help bridge the gap between Human Resources demand and supply in the nuclear market by structuring qualifications in small independent parts. This very specific ECVET feature of a qualification, facilitates the process of competences accumulation and the lifelong learning, mobility and flexible learning pathways. New developments are presented about the Competence-Based Qualification System development for the nuclear energy sector.

  12. Solar water heating system for a lunar base

    Science.gov (United States)

    Somers, Richard E.; Haynes, R. Daniel

    1992-01-01

    An investigation of the feasibility of using a solar water heater for a lunar base is described. During the investigation, computer codes were developed to model the lunar base configuration, lunar orbit, and heating systems. Numerous collector geometries, orientation variations, and system options were identified and analyzed. The results indicate that the recommended solar water heater could provide 88 percent of the design load and would not require changes in the overall lunar base design. The system would give a 'safe-haven' water heating capability and use only 7 percent to 10 percent as much electricity as an electric heating system. As a result, a fixed position photovoltaic array can be reduced by 21 sq m.

  13. Formal Specification Based Automatic Test Generation for Embedded Network Systems

    Directory of Open Access Journals (Sweden)

    Eun Hye Choi

    2014-01-01

    Full Text Available Embedded systems have become increasingly connected and communicate with each other, forming large-scaled and complicated network systems. To make their design and testing more reliable and robust, this paper proposes a formal specification language called SENS and a SENS-based automatic test generation tool called TGSENS. Our approach is summarized as follows: (1 A user describes requirements of target embedded network systems by logical property-based constraints using SENS. (2 Given SENS specifications, test cases are automatically generated using a SAT-based solver. Filtering mechanisms to select efficient test cases are also available in our tool. (3 In addition, given a testing goal by the user, test sequences are automatically extracted from exhaustive test cases. We’ve implemented our approach and conducted several experiments on practical case studies. Through the experiments, we confirmed the efficiency of our approach in design and test generation of real embedded air-conditioning network systems.

  14. Designing and evaluating risk-based surveillance systems

    DEFF Research Database (Denmark)

    Willeberg, Preben; Nielsen, Liza Rosenbaum; Salman, Mo

    2012-01-01

    Risk-based surveillance systems reveal occurrence of disease or infection in a sample of population units, which are selected on the basis of risk factors for the condition under study. The purpose of such systems for supporting practical animal disease policy formulations and management decisions...... applicable risk estimate for use in designing and evaluating a risk-based surveillance system would be a crude (unadjusted) relative risk, odds ratio or apparent prevalence. Risk estimates found in the published literature, however, are often the results of multivariable analyses implicitly adjusting...... the estimates for confounding from other risk factors. We describe some potential unintentional effects when using adjusted risk estimates in evaluating the efficacy and sensitivity of risk-based surveillance systems (SSe). In two examples, we quantify and compare the efficacy and SSe using adjusted and crude...

  15. Design Intelligent Model base Online Tuning Methodology for Nonlinear System

    Directory of Open Access Journals (Sweden)

    Ali Roshanzamir

    2014-04-01

    Full Text Available In various dynamic parameters systems that need to be training on-line adaptive control methodology is used. In this paper fuzzy model-base adaptive methodology is used to tune the linear Proportional Integral Derivative (PID controller. The main objectives in any systems are; stability, robust and reliability. However PID controller is used in many applications but it has many challenges to control of continuum robot. To solve these problems nonlinear adaptive methodology based on model base fuzzy logic is used. This research is used to reduce or eliminate the PID controller problems based on model reference fuzzy logic theory to control of flexible robot manipulator system and testing of the quality of process control in the simulation environment of MATLAB/SIMULINK Simulator.

  16. Cloud Services for Collaborative Web Based Project Management System

    Directory of Open Access Journals (Sweden)

    Chetan Yuvraj Dhembre

    2011-11-01

    Full Text Available Cloud computing is a style of computing which is having dynamically scalable virtualized resources provided as a service over the Internet. In this paper we are presenting project management system (PMS based on cloud computing. Lack of manageability and variant projects scope are two of the worst problems plaguing IT organizations today. Not only these problems can be costly, they can be deadly to business objectives. To compete, we need to take out uncertainty with technologies that improve definition, purpose, and scope. This cloud based project management system provides solution for these problems. This system is based on agile software development lifecycle on cloud. The cloud based PMS will give you greater real-time insight in project requirements, and the inevitable changes of the scope that cross the boundaries of the distributed teams.

  17. A compact PC-based X-ray imaging system

    Energy Technology Data Exchange (ETDEWEB)

    Asimidis, A. [Physics Department, Laboratory B, University of Ioannina, GR-45110 Ioannina (Greece)]. E-mail: aasimid@cc.uoi.gr; Evangelou, I. [Physics Department, Laboratory B, University of Ioannina, GR-45110 Ioannina (Greece); Kokkas, P. [Physics Department, Laboratory B, University of Ioannina, GR-45110 Ioannina (Greece); Manthos, N. [Physics Department, Laboratory B, University of Ioannina, GR-45110 Ioannina (Greece); Triantis, F. [Physics Department, Laboratory B, University of Ioannina, GR-45110 Ioannina (Greece); Speller, R.D. [Medical Physics and Bioengineering Department, University College London, 11-20 Capper Street, London WC1E 6JA (United Kingdom); Hall, G. [Physics Department, Imperial College, London SW7 2BW (United Kingdom); Stelt, P.F. van der [Department of Oral and Maxillofacial Radiology, Academic Centre for Dentistry Amsterdam, NL 1066 EA Amsterdam (Netherlands)

    2007-04-01

    A compact, portable PC-based X-ray imaging system has been developed based on a 2D silicon microstrip sensor and particle physics readout electronics. The sensor is housed in a specially built hybrid, which also hosts the front-end electronics. The control and the readout electronics used are based on the standard PCI and PMC architectures and were originally developed for High Energy Physics Experiments. The use of PCI based electronics and the development of the control software for the PC-Linux platform led to a compact, portable, low cost imaging system. The system was initially tested and evaluated with beta particles from a {sup 90}Sr radioactive source, gamma rays from an {sup 241}Am radioactive source and cosmic rays, and it displayed consistent response. It was then operated using a compact X-ray machine with Mo tube and images of various targets were reconstructed offline using the ROOT data analysis package.

  18. Dynamic positioning system based on active disturbance rejection technology

    Science.gov (United States)

    Lei, Zhengling; Guo, Chen; Fan, Yunsheng

    2015-08-01

    A dynamically positioned vessel, by the International Maritime Organization (IMO) and the certifying class societies (DNV, ABS, LR, etc.), is defined as a vessel that maintains its position and heading (fixed location or pre-determined track) exclusively by means of active thrusters. The development of control technology promotes the upgrading of dynamic positioning (DP) systems. Today there are two different DP systems solutions available on the market: DP system based on PID regulator and that based on model-based control. Both systems have limited disturbance rejection capability due to their design principle. In this paper, a new DP system solution is proposed based on Active Disturbance Rejection Control (ADRC) technology. This technology is composed of Tracking-Differentiator (TD), Extended State Observer (ESO) and Nonlinear Feedback Combination. On one hand, both TD and ESO can act as filters and can be used in place of conventional filters; on the other hand, the total disturbance of the system can be estimated and compensated by ESO, which therefore enhances the system's disturbance rejection capability. This technology's advantages over other methods lie in two aspects: 1) This method itself can not only achieve control objectives but also filter noisy measurements without other specialized filters; 2) This method offers a new useful approach to suppress the ocean disturbance. The simulation results demonstrate the effectiveness of the proposed method.

  19. P2MP MPLS-Based Hierarchical Service Management System

    Science.gov (United States)

    Kumaki, Kenji; Nakagawa, Ikuo; Nagami, Kenichi; Ogishi, Tomohiko; Ano, Shigehiro

    This paper proposes a point-to-multipoint (P2MP) Multi-Protocol Label Switching (MPLS) based hierarchical service management system. Traditionally, general management systems deployed in some service providers control MPLS Label Switched Paths (LSPs) (e.g., RSVP-TE and LDP) and services (e.g., L2VPN, L3VPN and IP) separately. In order for dedicated management systems for MPLS LSPs and services to cooperate with each other automatically, a hierarchical service management system has been proposed with the main focus on point-to-point (P2P) TE LSPs in MPLS path management. In the case where P2MP TE LSPs and services are deployed in MPLS networks, the dedicated management systems for P2MP TE LSPs and services must work together automatically. Therefore, this paper proposes a new algorithm that uses a correlation between P2MP TE LSPs and multicast VPN services based on a P2MP MPLS-based hierarchical service management architecture. Also, the capacity and performance of the proposed algorithm are evaluated by simulations, which are actually based on certain real MPLS production networks, and are compared to that of the algorithm for P2P TE LSPs. Results show this system is very scalable within real MPLS production networks. This system, with the automatic correlation, appears to be deployable in real MPLS production networks.

  20. [Environmental impacts of sewage treatment system based on emergy analysis].

    Science.gov (United States)

    Li, Min; Zhang, Xiao-Hong; Li, Yuan-Wei; Zhang, Hong; Zhao, Min; Deng, Shi-Huai

    2013-02-01

    "Integrated sewage treatment system" (ISTS) consists of sewage treatment plant system and their products (treated water and dewatered sludge) disposal facilities, which gives a holistic view of the whole sewage treatment process. During its construction and operation, ISTS has two main impacts on the environment, i.e., the consumption of resources and the damage of discharged pollutants on the environment, while the latter was usually ignored by the previous researchers when they assessed the impacts of wastewater treatment system. In order to more comprehensively understanding the impacts of sewage treatment on the environment, an analysis was made on the ISTS based on the theories of emergy analysis, and, in combining with ecological footprint theory, the sustainability of the ISTS was also analyzed. The results showed that the emergy of the impacts of water pollutants on the environment was far larger than that of the impacts of air pollutants, and NH3-N was the main responsible cause. The emergy consumption of ISTS mainly came from the emergy of wastewater and of local renewable resources. The "sewage treatment plant system + landfill system" had the highest emergy utilization efficiency, while the "sewage treatment plant system + reclaimed water reuse system + incineration system" had the lowest one. From the aspect of environmental sustainability, the "sewage treatment plant system + reclaimed water reuse system + landfill system" was the best ISTS, while the "sewage treatment plant system + incineration system" was the worst one.