Molecular architectures based on pi-conjugated block copolymers for global quantum computation

Energy Technology Data Exchange (ETDEWEB)

Mujica Martinez, C A; Arce, J C [Universidad del Valle, Departamento de QuImica, A. A. 25360, Cali (Colombia); Reina, J H [Universidad del Valle, Departamento de Fisica, A. A. 25360, Cali (Colombia); Thorwart, M, E-mail: camujica@univalle.edu.c, E-mail: j.reina-estupinan@physics.ox.ac.u, E-mail: jularce@univalle.edu.c [Institut fuer Theoretische Physik IV, Heinrich-Heine-Universitaet Duesseldorf, 40225 Duesseldorf (Germany)

2009-05-01

We propose a molecular setup for the physical implementation of a barrier global quantum computation scheme based on the electron-doped pi-conjugated copolymer architecture of nine blocks PPP-PDA-PPP-PA-(CCH-acene)-PA-PPP-PDA-PPP (where each block is an oligomer). The physical carriers of information are electrons coupled through the Coulomb interaction, and the building block of the computing architecture is composed by three adjacent qubit systems in a quasi-linear arrangement, each of them allowing qubit storage, but with the central qubit exhibiting a third accessible state of electronic energy far away from that of the qubits' transition energy. The third state is reached from one of the computational states by means of an on-resonance coherent laser field, and acts as a barrier mechanism for the direct control of qubit entanglement. Initial estimations of the spontaneous emission decay rates associated to the energy level structure allow us to compute a damping rate of order 10{sup -7} s, which suggest a not so strong coupling to the environment. Our results offer an all-optical, scalable, proposal for global quantum computing based on semiconducting pi-conjugated polymers.

A Hybrid Architecture for Vision-Based Obstacle Avoidance

Directory of Open Access Journals (Sweden)

Mehmet Serdar Güzel

2013-01-01

Full Text Available This paper proposes a new obstacle avoidance method using a single monocular vision camera as the only sensor which is called as Hybrid Architecture. This architecture integrates a high performance appearance-based obstacle detection method into an optical flow-based navigation system. The hybrid architecture was designed and implemented to run both methods simultaneously and is able to combine the results of each method using a novel arbitration mechanism. The proposed strategy successfully fused two different vision-based obstacle avoidance methods using this arbitration mechanism in order to permit a safer obstacle avoidance system. Accordingly, to establish the adequacy of the design of the obstacle avoidance system, a series of experiments were conducted. The results demonstrate the characteristics of the proposed architecture, and the results prove that its performance is somewhat better than the conventional optical flow-based architecture. Especially, the robot employing Hybrid Architecture avoids lateral obstacles in a more smooth and robust manner than when using the conventional optical flow-based technique.

Implications of Services-Oriented Architecture and Open Architecture Composable Systems on the Acquisition Organizations and Processes

National Research Council Canada - National Science Library

Brummett, Cory S; Finney, Benjamin H

2008-01-01

.... Many systems, systems-of-systems and families of systems with different software architectures are acquired and often have difficulty operating together, which causes delays, increases costs, and limits re-use...

PLM support to architecture based development

DEFF Research Database (Denmark)

Bruun, Hans Peter Lomholt

, organisation, processes, etc. To identify, evaluate, and align aspects of these domains are necessary for developing the optimal layout of product architectures. It is stated in this thesis that architectures describe building principles for products, product families, and product programs, where this project...... and developing architectures can be difficult to manage, update, and maintain during development. The concept of representing product architectures in computer-based product information tools has though been central in this research, and in the creation of results. A standard PLM tool (Windchill PDMLink...... architectures in computer systems. Presented results build on research literature and experiences from industrial partners. Verification of the theory contributions, approaches, models, and tools, have been carried out in industrial projects, with promising results. This thesis describes the means for: (1...

Synthesis and optical properties of CuS nanoplate-based architectures by a solvothermal method

International Nuclear Information System (INIS)

Li Fei; Kong Tao; Bi Wentuan; Li Dachang; Li Zhen; Huang Xintang

2009-01-01

The controlled synthesis of copper sulfide (CuS) nanoplate-based architectures in different solvents has been realized at low cost by simply reaction of Cu(NO 3 ) 2 .3H 2 O and S under solvothermal conditions without the use of any template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrometer and fluorescence measurement were used to characterize the products. The products were all in hexagonal phase with high crystallinity and the morphology was significantly influenced by the solvents. The CuS products synthesized in dimethylformamide (DMF) were nanoplates and the samples prepared in ethanol were flower-like morphology composed of large numbers of nanoplates, but those synthesized in ethylene glycol (EG) were CuS architectures with high symmetry made up of several nanoplates arranged in a certain mode. The optical properties were investigated and the growth mechanisms of these CuS crystals were also proposed.

A service based component model for composing and exploring MPSoC platforms

DEFF Research Database (Denmark)

Tranberg-Hansen, Anders Sejer; Madsen, Jan

2008-01-01

This paper presents an abstract service based modelling method for use in performance estimation and design space exploration of Multi Processor System On Chip (MPSoC) based systems. The method provides the infrastructure for composing abstract hardware and software models of stream based systems...... which can be used to produce detailed quantitative information regarding runtime properties of a given system through simulations. The method is based on a service oriented model of computation which is a modified version of Hierarchical Coloured Petri Nets.......This paper presents an abstract service based modelling method for use in performance estimation and design space exploration of Multi Processor System On Chip (MPSoC) based systems. The method provides the infrastructure for composing abstract hardware and software models of stream based systems...

Real-time collaboration in activity-based architectures

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak

2004-01-01

With the growing research into mobile and ubiquitous computing, there is a need for addressing how such infrastructures can support collaboration between nomadic users. We present the activity based computing paradigm and outline a proposal for handling collaboration in an activity......-based architecture. We argue that activity-based computing establishes a natural and sound conceptual and architectural basis for session management in real-time, synchronous collaboration....

Composer Recognition based on 2D-Filtered Piano-Rolls

DEFF Research Database (Denmark)

Velarde, Gissel; Weyde, Tillman; Cancino Chacón, Carlos

2016-01-01

We propose a method for music classification based on the use of convolutional models on symbolic pitch-time representations (i.e. piano-rolls) which we apply to composer recognition. An excerpt of a piece to be classified is first sampled to a 2D pitch-time representation which is then subjected...

Evolution of IT Architecture: based on Taxonomy perspective

NARCIS (Netherlands)

Suh, Hanjun; van Hillegersberg, Jos

2013-01-01

This research aims to explore how latest IT architecture is evolving in real world. We reviewed historical IT structure and classified five IT architecture typology based on various dimensions of IT architectures such as processing decentralization, network connectivity, data and program

Smart sensor-based geospatial architecture for dike monitoring

Science.gov (United States)

Herle, S.; Becker, R.; Blankenbach, J.

2016-04-01

Artificial hydraulic structures like dams or dikes used for water level regulations or flood prevention are continuously under the influence of the weather and variable river regimes. Thus, ongoing monitoring and simulation is crucial in order to determine the inner condition. Potentially life-threatening situations, in extreme case a failure, must be counteracted by all available means. Nowadays flood warning systems rely exclusively on water level forecast without considering the state of the structure itself. Area-covering continuous knowledge of the inner state including time dependent changes increases the capability of recognizing and locating vulnerable spots for early treatment. In case of a predicted breach, advance warning time for alerting affected citizens can be extended. Our approach is composed of smart sensors integrated in a service-oriented geospatial architecture to monitor and simulate artificial hydraulic structures continuously. The sensors observe the inner state of the construction like the soil moisture or the stress and deformation over time but also various external influences like water levels or wind speed. They are interconnected in distributed network architecture by a so-called sensor bus system based on lightweight protocols like Message Queue Telemetry Transport for Sensor Networks (MQTT-SN). These sensor data streams are transferred into an OGC Sensor Web Enablement (SWE) data structure providing high-level geo web services to end users. Bundled with 3rd party geo web services (WMS etc.) powerful processing and simulation tools can be invoked using the Web Processing Service (WPS) standard. Results will be visualized in a geoportal allowing user access to all information.

An ontology-based approach for modelling architectural styles

OpenAIRE

Pahl, Claus; Giesecke, Simon; Hasselbring, Wilhelm

2007-01-01

peer-reviewed The conceptual modelling of software architectures is of central importance for the quality of a software system. A rich modelling language is required to integrate the different aspects of architecture modelling, such as architectural styles, structural and behavioural modelling, into a coherent framework.We propose an ontological approach for architectural style modelling based on description logic as an abstract, meta-level modelling instrument. Architect...

High-resolution quantization based on soliton self-frequency shift and spectral compression in a bi-directional comb-fiber architecture

Science.gov (United States)

Zhang, Xuyan; Zhang, Zhiyao; Wang, Shubing; Liang, Dong; Li, Heping; Liu, Yong

2018-03-01

We propose and demonstrate an approach that can achieve high-resolution quantization by employing soliton self-frequency shift and spectral compression. Our approach is based on a bi-directional comb-fiber architecture which is composed of a Sagnac-loop-based mirror and a comb-like combination of N sections of interleaved single-mode fibers and high nonlinear fibers. The Sagnac-loop-based mirror placed at the terminal of a bus line reflects the optical pulses back to the bus line to achieve additional N-stage spectral compression, thus single-stage soliton self-frequency shift (SSFS) and (2 N - 1)-stage spectral compression are realized in the bi-directional scheme. The fiber length in the architecture is numerically optimized, and the proposed quantization scheme is evaluated by both simulation and experiment in the case of N = 2. In the experiment, a quantization resolution of 6.2 bits is obtained, which is 1.2-bit higher than that of its uni-directional counterpart.

Drawing-Based Procedural Modeling of Chinese Architectures.

Science.gov (United States)

Fei Hou; Yue Qi; Hong Qin

2012-01-01

This paper presents a novel modeling framework to build 3D models of Chinese architectures from elevation drawing. Our algorithm integrates the capability of automatic drawing recognition with powerful procedural modeling to extract production rules from elevation drawing. First, different from the previous symbol-based floor plan recognition, based on the novel concept of repetitive pattern trees, small horizontal repetitive regions of the elevation drawing are clustered in a bottom-up manner to form architectural components with maximum repetition, which collectively serve as building blocks for 3D model generation. Second, to discover the global architectural structure and its components' interdependencies, the components are structured into a shape tree in a top-down subdivision manner and recognized hierarchically at each level of the shape tree based on Markov Random Fields (MRFs). Third, shape grammar rules can be derived to construct 3D semantic model and its possible variations with the help of a 3D component repository. The salient contribution lies in the novel integration of procedural modeling with elevation drawing, with a unique application to Chinese architectures.

A method for valuing architecture-based business transformation and measuring the value of solutions architecture

OpenAIRE

Slot, R.G.

2010-01-01

Enterprise and Solution Architecture are key in today’s business environment. It is surprising that the foundation and business case for these activities are nonexistent; the financial value for the business of these activities is largely undetermined. To determine business value of enterprise and solution architecture, this thesis shows how to measure and quantify, in business terms, the value of enterprise architecture-based on business transformation and the value of solution architecture.

On the national characteristics of Chinese ancient architecture

Science.gov (United States)

Yan, Jun; Shan, Xiaoxian

2018-03-01

architecture is a complex composed of technology and art. It is a concrete reflection of everything in the local society at that time. The architecture is basically consistent with the social content and historical development. This paper analyzes the formation, characteristics and style of ancient Chinese architecture and expounds its national spirit and characteristics.

A COMPUTER APPLICATION FOR THE ARCHITECTURAL PROGRAM DEVELOPMENT IN DESIGN EDUCATION

Directory of Open Access Journals (Sweden)

Daniel de Carvalho Moreira

2012-02-01

Full Text Available The development of the architectural program in the design studio faces several difficulties. The purpose of the program is to describe the conditions where the building being designed will operate; this requires a lot of information and organization. Due to its complexity, the architetural program definition in the disciplines of design is often simplified. This article discusses such issue and proposes a computer application (SINFORMA that gathers information about the building and the theme of the project in order to develop the architectural program based on structures proposed by bibliographic references. The SINFORMA is composed by a framework which includes a data base and modules which analyze and organize functional requirements, according to the Problem Seeking method and the contemporary values of architecture enumerated by Hershberger. It is discussed how the application can be applied in design education and how it offers students a practical approach and a comprehensive data analysis for the design of built environment. Keywords: Architectural programming, Architectural design, Education.

Quality-Attribute-Based Economic Valuation of Architectural Patterns

National Research Council Canada - National Science Library

Ozkaya, Ipek; Kazman, Rick; Klein, Mark

2007-01-01

.... Architectural patterns can be used to achieve quality attribute requirements. Consequently, architectural patterns generate value based on the present and future utility of the quality attributes they achieve...

An agent-based peer-to-peer architecture for semantic discovery of manufacturing services across virtual enterprises

Science.gov (United States)

Zhang, Wenyu; Zhang, Shuai; Cai, Ming; Jian, Wu

2015-04-01

With the development of virtual enterprise (VE) paradigm, the usage of serviceoriented architecture (SOA) is increasingly being considered for facilitating the integration and utilisation of distributed manufacturing resources. However, due to the heterogeneous nature among VEs, the dynamic nature of a VE and the autonomous nature of each VE member, the lack of both sophisticated coordination mechanism in the popular centralised infrastructure and semantic expressivity in the existing SOA standards make the current centralised, syntactic service discovery method undesirable. This motivates the proposed agent-based peer-to-peer (P2P) architecture for semantic discovery of manufacturing services across VEs. Multi-agent technology provides autonomous and flexible problemsolving capabilities in dynamic and adaptive VE environments. Peer-to-peer overlay provides highly scalable coupling across decentralised VEs, each of which exhibiting as a peer composed of multiple agents dealing with manufacturing services. The proposed architecture utilises a novel, efficient, two-stage search strategy - semantic peer discovery and semantic service discovery - to handle the complex searches of manufacturing services across VEs through fast peer filtering. The operation and experimental evaluation of the prototype system are presented to validate the implementation of the proposed approach.

Study on Global GIS architecture and its key technologies

Science.gov (United States)

Cheng, Chengqi; Guan, Li; Lv, Xuefeng

2010-11-01

Global GIS (G2IS) is a system, which supports the huge data process and the global direct manipulation on global grid based on spheroid or ellipsoid surface. Based on global subdivision grid (GSG), Global GIS architecture is presented in this paper, taking advantage of computer cluster theory, the space-time integration technology and the virtual reality technology. Global GIS system architecture is composed of five layers, including data storage layer, data representation layer, network and cluster layer, data management layer and data application layer. Thereinto, it is designed that functions of four-level protocol framework and three-layer data management pattern of Global GIS based on organization, management and publication of spatial information in this architecture. Three kinds of core supportive technologies, which are computer cluster theory, the space-time integration technology and the virtual reality technology, and its application pattern in the Global GIS are introduced in detail. The primary ideas of Global GIS in this paper will be an important development tendency of GIS.

Language-based support for service oriented architectures

DEFF Research Database (Denmark)

Giambiagi, Pablo; Owe, Olaf; Ravn, Anders Peter

2006-01-01

The fast evolution of the Internet has popularized service-oriented architectures (SOA) with their promise of dynamic IT-supported inter-business collaborations. Yet this popularity does not reflect on the number of actual applications using the architecture. Programming models in use today make...... a poor match for the distributed, loosely-coupled, document-based nature of SOA. The gap is actually increasing. For example, interoperability between different organizations, requires contracts to reduce risks. Thus, high-level models of contracts are making their way into service-oriented architectures......, but application developers are still left to their own devices when it comes to writing code that will comply with a contract. This paper surveys existing and future directions regarding language-based solutions to the above problem....

Centaure: an heterogeneous parallel architecture for computer vision

International Nuclear Information System (INIS)

Peythieux, Marc

1997-01-01

This dissertation deals with the architecture of parallel computers dedicated to computer vision. In the first chapter, the problem to be solved is presented, as well as the architecture of the Sympati and Symphonie computers, on which this work is based. The second chapter is about the state of the art of computers and integrated processors that can execute computer vision and image processing codes. The third chapter contains a description of the architecture of Centaure. It has an heterogeneous structure: it is composed of a multiprocessor system based on Analog Devices ADSP21060 Sharc digital signal processor, and of a set of Symphonie computers working in a multi-SIMD fashion. Centaure also has a modular structure. Its basic node is composed of one Symphonie computer, tightly coupled to a Sharc thanks to a dual ported memory. The nodes of Centaure are linked together by the Sharc communication links. The last chapter deals with a performance validation of Centaure. The execution times on Symphonie and on Centaure of a benchmark which is typical of industrial vision, are presented and compared. In the first place, these results show that the basic node of Centaure allows a faster execution than Symphonie, and that increasing the size of the tested computer leads to a better speed-up with Centaure than with Symphonie. In the second place, these results validate the choice of running the low level structure of Centaure in a multi- SIMD fashion. (author) [fr

Architectural Synthesis of Flow-Based Microfluidic Large-Scale Integration Biochips

DEFF Research Database (Denmark)

Minhass, Wajid Hassan; Pop, Paul; Madsen, Jan

2012-01-01

,we propose a top-down architectural synthesis methodology for the flow-based biochips. Starting from a given biochemical application and a microfluidic component library, we are interested in synthesizing a biochip architecture, i.e., performing component allocation from the library based on the biochemical....... By combining several microvalves, more complex units, such as micropumps, switches, mixers, and multiplexers, can be built. The manufacturing technology, soft lithography, used for the flow-based biochips is advancing faster than Moore's law, resulting in increased architectural complexity. However...... by synthesizing architectures for real-life applications as well as synthetic benchmarks....

A supportive architecture for CFD-based design optimisation

Science.gov (United States)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture

An Intelligent Agent based Architecture for Visual Data Mining

OpenAIRE

Hamdi Ellouzi; Hela Ltifi; Mounir Ben Ayed

2016-01-01

the aim of this paper is to present an intelligent architecture of Decision Support System (DSS) based on visual data mining. This architecture applies the multi-agent technology to facilitate the design and development of DSS in complex and dynamic environment. Multi-Agent Systems add a high level of abstraction. To validate the proposed architecture, it is implemented to develop a distributed visual data mining based DSS to predict nosocomial infectionsoccurrence in intensive care units. Th...

Distributed behavior-based control architecture for a wall climbing robot

International Nuclear Information System (INIS)

Nadir Ould Khessal; Shamsudin H.M. Amin . nadir.ok@ieee.org

1999-01-01

In the past two decades, Behavior-based AI (Artificial Intelligence) has emerged as a new approach in designing mobile robot control architecture. It stresses on the issues of reactivity, concurrency and real-time control. In this paper we propose a new approach in designing robust intelligent controllers for mobile robot platforms. The Behaviour-based paradigm implemented in a multiprocessing firmware architecture will further enhance parallelism present in the subsumption paradigm itself and increased real-timeness. The paper summarises research done to design a four-legged wall climbing robot. The emphasis will be on the control architecture of the robot based on the Behavior -based paradigm. The robot control architecture is made up of two layers, the locomotion layer and the gait controller layer. The two layers are implemented on a Vesta 68332 processor board running the Behaviour-based kernel, The software is developed using the L programming language, introduced by IS Robotics. The Behaviour-based paradigm is outlined and contrasted with the classical Knowledge-based approach. A description of the distributed architecture is presented followed by a presentation of the Behaviour-based agents for the two layers. (author)

ePix: a class of architectures for second generation LCLS cameras

International Nuclear Information System (INIS)

Dragone, A; Caragiulo, P; Markovic, B; Herbst, R; Reese, B; Herrmann, S C; Hart, P A; Segal, J; Carini, G A; Kenney, C J; Haller, G

2014-01-01

ePix is a novel class of ASIC architectures, based on a common platform, optimized to build modular scalable detectors for LCLS. The platform architecture is composed of a random access analog matrix of pixel with global shutter, fast parallel column readout, and dedicated sigma-delta analog-to-digital converters per column. It also implements a dedicated control interface and all the required support electronics to perform configuration, calibration and readout of the matrix. Based on this platform a class of front-end ASICs and several camera modules, meeting different requirements, can be developed by designing specific pixel architectures. This approach reduces development time and expands the possibility of integration of detector modules with different size, shape or functionality in the same camera. The ePix platform is currently under development together with the first two integrating pixel architectures: ePix100 dedicated to ultra low noise applications and ePix10k for high dynamic range applications.

Technology System Architecture for Web–Based Education

Directory of Open Access Journals (Sweden)

A. Canales–Cruz

2009-04-01

Full Text Available In this paper a new architecture for development of Web–Based Education systems is presented. The se systems are centered in the learner and adapted to their personals needs in intelligent form. The architecture is based on the IEEE 1484 LTSA (Learning Technology System Architecture specification and it assembles to software development and instructional design patterns. On the one hand, the software development pattern is supported under a Multi–Agents System, it employs the methods and technical of the Domain Engineering for development of IRLCOO (Intelligent Reusable Learning Components Object Oriented. IRLCOO are a special type of Sharable Content Object according to SCORM (Sharable Content Object Reusable Model. On the other hand, the instructional design pattern incorporates a mental model as the Conceptual Maps to transmit, build and generate appropriate knowledge to this educational environment type.

Comparison of Three Smart Camera Architectures for Real-Time Machine Vision System

Directory of Open Access Journals (Sweden)

Abdul Waheed Malik

2013-12-01

Full Text Available This paper presents a machine vision system for real-time computation of distance and angle of a camera from a set of reference points located on a target board. Three different smart camera architectures were explored to compare performance parameters such as power consumption, frame speed and latency. Architecture 1 consists of hardware machine vision modules modeled at Register Transfer (RT level and a soft-core processor on a single FPGA chip. Architecture 2 is commercially available software based smart camera, Matrox Iris GT. Architecture 3 is a two-chip solution composed of hardware machine vision modules on FPGA and an external microcontroller. Results from a performance comparison show that Architecture 2 has higher latency and consumes much more power than Architecture 1 and 3. However, Architecture 2 benefits from an easy programming model. Smart camera system with FPGA and external microcontroller has lower latency and consumes less power as compared to single FPGA chip having hardware modules and soft-core processor.

A Tokenization-Based Communication Architecture for HCE-Enabled NFC Services

Directory of Open Access Journals (Sweden)

Busra Ozdenizci

2016-01-01

Full Text Available Following the announcement of Host Card Emulation (HCE technology, card emulation mode based Near Field Communication (NFC services have gained further appreciation as an enabler of the Cloud-based Secure Element (SE concept. A comprehensive and complete architecture with a centralized and feasible business model for diverse HCE-based NFC services will be highly appreciated, particularly by Service Providers and users. To satisfy the need in this new emerging research area, a Tokenization-based communication architecture for HCE-based NFC services is presented in this paper. Our architecture proposes Two-Phased Tokenization to enable the identity management of both user and Service Provider. NFC Smartphone users can store, manage, and make use of their sensitive data on the Cloud for NFC services; Service Providers can also provide diverse card emulation NFC services easily through the proposed architecture. In this paper, we initially present the Two-Phased Tokenization model and then validate the proposed architecture by providing a case study on access control. We further evaluate the usability aspect in terms of an authentication scheme. We then discuss the ecosystem and business model comprised of the proposed architecture and emphasize the contributions to ecosystem actors. Finally, suggestions are provided for data protection in transit and at rest.

A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

DEFF Research Database (Denmark)

Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

2012-01-01

This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...... in multiple time-scales and allows seamless integration of diverse techniques for online operation control, optimal scheduling, and dynamic pricing. The design of a home energy manager based on this architecture is illustrated and the simulation results with Matlab/Simulink confirm the viability...

Model-based safety architecture framework for complex systems

NARCIS (Netherlands)

Schuitemaker, Katja; Rajabali Nejad, Mohammadreza; Braakhuis, J.G.; Podofillini, Luca; Sudret, Bruno; Stojadinovic, Bozidar; Zio, Enrico; Kröger, Wolfgang

2015-01-01

The shift to transparency and rising need of the general public for safety, together with the increasing complexity and interdisciplinarity of modern safety-critical Systems of Systems (SoS) have resulted in a Model-Based Safety Architecture Framework (MBSAF) for capturing and sharing architectural

Memristor-Based Synapse Design and Training Scheme for Neuromorphic Computing Architecture

Science.gov (United States)

2012-06-01

system level built upon the conventional Von Neumann computer architecture [2][3]. Developing the neuromorphic architecture at chip level by...SCHEME FOR NEUROMORPHIC COMPUTING ARCHITECTURE 5a. CONTRACT NUMBER FA8750-11-2-0046 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 62788F 6...creation of memristor-based neuromorphic computing architecture. Rather than the existing crossbar-based neuron network designs, we focus on memristor

An Architectural Decision Tool Based on Scenarios and Non-functional Requirements

OpenAIRE

Mr. Mahesh Parmar; Prof. W.U. Khan; Dr. Binod Kumar

2011-01-01

Software architecture design is often based on architects intuition and previous experience. Little methodological support is available, but there are still no effective solutions to guide the architectural design. The most difficult activity is the transformation from non-functional requirement specification into software architecture. To achieve above things proposed “An Architectural Decision Tool Based on Scenarios and Nonfunctional Requirementsâ€. In this proposed tool scenarios are fi...

Modeling and Verification of Dependable Electronic Power System Architecture

Science.gov (United States)

Yuan, Ling; Fan, Ping; Zhang, Xiao-fang

The electronic power system can be viewed as a system composed of a set of concurrently interacting subsystems to generate, transmit, and distribute electric power. The complex interaction among sub-systems makes the design of electronic power system complicated. Furthermore, in order to guarantee the safe generation and distribution of electronic power, the fault tolerant mechanisms are incorporated in the system design to satisfy high reliability requirements. As a result, the incorporation makes the design of such system more complicated. We propose a dependable electronic power system architecture, which can provide a generic framework to guide the development of electronic power system to ease the development complexity. In order to provide common idioms and patterns to the system *designers, we formally model the electronic power system architecture by using the PVS formal language. Based on the PVS model of this system architecture, we formally verify the fault tolerant properties of the system architecture by using the PVS theorem prover, which can guarantee that the system architecture can satisfy high reliability requirements.

3D integration for NoC-based SoC architectures

CERN Document Server

Sheibanyrad, Abbas; Pétrot, Frédéric

2011-01-01

3D-Integration for NoC-based SoC Architectures gathers the recent advances in the whole domain by renowned experts in the field to build a comprehensive and consistent book around the hot topics of three-dimensional architectures and micro-architectures.

Composing art songs based on Igbo traditional music:concept and ...

African Journals Online (AJOL)

Composing modern African art music from the African stock has drawn the attention of many African and non-African composers and scholars alike in recent times. The common interest to decipher the creative concept and process of the new works emerging from the attempts of African composers at creative continuum of ...

Cloud Based Big Data Infrastructure: Architectural Components and Automated Provisioning

OpenAIRE

Demchenko, Yuri; Turkmen, Fatih; Blanchet, Christophe; Loomis, Charles; Laat, Caees de

2016-01-01

This paper describes the general architecture and functional components of the cloud based Big Data Infrastructure (BDI). The proposed BDI architecture is based on the analysis of the emerging Big Data and data intensive technologies and supported by the definition of the Big Data Architecture Framework (BDAF) that defines the following components of the Big Data technologies: Big Data definition, Data Management including data lifecycle and data structures, Big Data Infrastructure (generical...

A High-Level Functional Architecture for GNSS-Based Road Charging Systems

DEFF Research Database (Denmark)

Zabic, Martina

2011-01-01

, a short introduction is provided followed by a presentation of the system engineering methodology to illustrate how and why system architectures can be beneficial for GNSS-based road charging systems. Hereafter, a basic set of system functions is determined based on functional system requirements, which...... charging systems, it is important to highlight the overall system architecture which is the framework that defines the basic functions and important concepts of the system. This paper presents a functional architecture for GNSS-based road charging systems based on the concepts of system engineering. First...... defines the necessary tasks that these systems must accomplish. Finally, this paper defines the system functionalities; and provides a generic high-level functional architecture for GNSS-based road charging systems....

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

Energy Technology Data Exchange (ETDEWEB)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot`s own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup.

ALLIANCE: An architecture for fault tolerant multi-robot cooperation

International Nuclear Information System (INIS)

Parker, L.E.

1995-02-01

ALLIANCE is a software architecture that facilitates the fault tolerant cooperative control of teams of heterogeneous mobile robots performing missions composed of loosely coupled, largely independent subtasks. ALLIANCE allows teams of robots, each of which possesses a variety of high-level functions that it can perform during a mission, to individually select appropriate actions throughout the mission based on the requirements of the mission, the activities of other robots, the current environmental conditions, and the robot's own internal states. ALLIANCE is a fully distributed, behavior-based architecture that incorporates the use of mathematically modeled motivations (such as impatience and acquiescence) within each robot to achieve adaptive action selection. Since cooperative robotic teams usually work in dynamic and unpredictable environments, this software architecture allows the robot team members to respond robustly, reliably, flexibly, and coherently to unexpected environmental changes and modifications in the robot team that may occur due to mechanical failure, the learning of new skills, or the addition or removal of robots from the team by human intervention. The feasibility of this architecture is demonstrated in an implementation on a team of mobile robots performing a laboratory version of hazardous waste cleanup

A CSP-Based Agent Modeling Framework for the Cougaar Agent-Based Architecture

Science.gov (United States)

Gracanin, Denis; Singh, H. Lally; Eltoweissy, Mohamed; Hinchey, Michael G.; Bohner, Shawn A.

2005-01-01

Cognitive Agent Architecture (Cougaar) is a Java-based architecture for large-scale distributed agent-based applications. A Cougaar agent is an autonomous software entity with behaviors that represent a real-world entity (e.g., a business process). A Cougaar-based Model Driven Architecture approach, currently under development, uses a description of system's functionality (requirements) to automatically implement the system in Cougaar. The Communicating Sequential Processes (CSP) formalism is used for the formal validation of the generated system. Two main agent components, a blackboard and a plugin, are modeled as CSP processes. A set of channels represents communications between the blackboard and individual plugins. The blackboard is represented as a CSP process that communicates with every agent in the collection. The developed CSP-based Cougaar modeling framework provides a starting point for a more complete formal verification of the automatically generated Cougaar code. Currently it is used to verify the behavior of an individual agent in terms of CSP properties and to analyze the corresponding Cougaar society.

A CORBA-Based Control Architecture for Real-Time Teleoperation Tasks in a Developmental Humanoid Robot

Directory of Open Access Journals (Sweden)

Hanafiah Yussof

2011-06-01

Full Text Available This paper presents the development of new Humanoid Robot Control Architecture (HRCA platform based on Common Object Request Broker Architecture (CORBA in a developmental biped humanoid robot for real-time teleoperation tasks. The objective is to make the control platform open for collaborative teleoperation research in humanoid robotics via the internet. Meanwhile, to generate optimal trajectory generation in bipedal walk, we proposed a real time generation of optimal gait by using Genetic Algorithms (GA to minimize the energy for humanoid robot gait. In addition, we proposed simplification of kinematical solutions to generate controlled trajectories of humanoid robot legs in teleoperation tasks. The proposed control systems and strategies was evaluated in teleoperation experiments between Australia and Japan using humanoid robot Bonten-Maru. Additionally, we have developed a user-friendly Virtual Reality (VR user interface that is composed of ultrasonic 3D mouse system and a Head Mounted Display (HMD for working coexistence of human and humanoid robot in teleoperation tasks. The teleoperation experiments show good performance of the proposed system and control, and also verified the good performance for working coexistence of human and humanoid robot.

A CORBA-Based Control Architecture for Real-Time Teleoperation Tasks in a Developmental Humanoid Robot

Directory of Open Access Journals (Sweden)

Hanafiah Yussof

2011-06-01

Full Text Available This paper presents the development of new Humanoid Robot Control Architecture (HRCA platform based on Common Object Request Broker Architecture (CORBA in a developmental biped humanoid robot for real‐time teleoperation tasks. The objective is to make the control platform open for collaborative teleoperation research in humanoid robotics via the internet. Meanwhile, to generate optimal trajectory generation in bipedal walk, we proposed a real time generation of optimal gait by using Genetic Algorithms (GA to minimize the energy for humanoid robot gait. In addition, we proposed simplification of kinematical solutions to generate controlled trajectories of humanoid robot legs in teleoperation tasks. The proposed control systems and strategies was evaluated in teleoperation experiments between Australia and Japan using humanoid robot Bonten‐Maru. Additionally, we have developed a user‐ friendly Virtual Reality (VR user interface that is composed of ultrasonic 3D mouse system and a Head Mounted Display (HMD for working coexistence of human and humanoid robot in teleoperation tasks. The teleoperation experiments show good performance of the proposed system and control, and also verified the good performance for working coexistence of human and humanoid robot.

Universally composable oblivious transfer based on a variant of lPN

DEFF Research Database (Denmark)

David, Bernardo Machado; Dowsley, Rafael; Nascimento, Anderson C A

2014-01-01

Oblivious transfer (OT) is a fundamental two-party cryptographic primitive that implies secure multiparty computation. In this paper, we introduce the first OT based on the Learning Parity with Noise (LPN) problem. More specifically, we use the LPN variant that was introduced by Alekhnovich (FOCS...... 2003). We prove that our protocol is secure against active static adversaries in the Universal Composability framework in the common reference string model. Our constructions are based solely on a LPN style assumption and thus represents a clear next step from current code-based OT protocols, which...

A modeling process to understand complex system architectures

Science.gov (United States)

Robinson, Santiago Balestrini

2009-12-01

In recent decades, several tools have been developed by the armed forces, and their contractors, to test the capability of a force. These campaign level analysis tools, often times characterized as constructive simulations are generally expensive to create and execute, and at best they are extremely difficult to verify and validate. This central observation, that the analysts are relying more and more on constructive simulations to predict the performance of future networks of systems, leads to the two central objectives of this thesis: (1) to enable the quantitative comparison of architectures in terms of their ability to satisfy a capability without resorting to constructive simulations, and (2) when constructive simulations must be created, to quantitatively determine how to spend the modeling effort amongst the different system classes. The first objective led to Hypothesis A, the first main hypotheses, which states that by studying the relationships between the entities that compose an architecture, one can infer how well it will perform a given capability. The method used to test the hypothesis is based on two assumptions: (1) the capability can be defined as a cycle of functions, and that it (2) must be possible to estimate the probability that a function-based relationship occurs between any two types of entities. If these two requirements are met, then by creating random functional networks, different architectures can be compared in terms of their ability to satisfy a capability. In order to test this hypothesis, a novel process for creating representative functional networks of large-scale system architectures was developed. The process, named the Digraph Modeling for Architectures (DiMA), was tested by comparing its results to those of complex constructive simulations. Results indicate that if the inputs assigned to DiMA are correct (in the tests they were based on time-averaged data obtained from the ABM), DiMA is able to identify which of any two

A concept of distributed architecture for maintenance robot systems

International Nuclear Information System (INIS)

Asama, Hajime

1990-01-01

Aiming at development of a robot system for maintenance tasks in nuclear power plants, a concept of distributed architecture for autonomous robot systems is discussed. At first, based on investigation of maintenance tasks, requirements for maintenance robots are introduced, and structures to realize multi-functions are discussed. Then, as a new design strategy of maintenance robot system, an autonomous and decentralized robot systems is proposed, which is composed of multiple robots, computers, and equipments, and concept of ACTRESS (ACTor-based Robots and Equipments Synthetic System) including communication framework between robotic components is designed. Finally, as a model of ACTRESS, a experimental system is developed, which deals with object-pushing tasks by two micromice and an environment modeler with communicating with each other. Both of parallel independent motion and cooperative motion based on communication is reconciled, and the efficiency of the distributed architecture is verified. (author)

Memory controllers for real-time embedded systems predictable and composable real-time systems

CERN Document Server

Akesson, Benny

2012-01-01

  Verification of real-time requirements in systems-on-chip becomes more complex as more applications are integrated. Predictable and composable systems can manage the increasing complexity using formal verification and simulation.  This book explains the concepts of predictability and composability and shows how to apply them to the design and analysis of a memory controller, which is a key component in any real-time system. This book is generally intended for readers interested in Systems-on-Chips with real-time applications.   It is especially well-suited for readers looking to use SDRAM memories in systems with hard or firm real-time requirements. There is a strong focus on real-time concepts, such as predictability and composability, as well as a brief discussion about memory controller architectures for high-performance computing. Readers will learn step-by-step how to go from an unpredictable SDRAM memory, offering highly variable bandwidth and latency, to a predictable and composable shared memory...

Design of Low-Cost Vehicle Roll Angle Estimator Based on Kalman Filters and an Iot Architecture.

Science.gov (United States)

Garcia Guzman, Javier; Prieto Gonzalez, Lisardo; Pajares Redondo, Jonatan; Sanz Sanchez, Susana; Boada, Beatriz L

2018-06-03

In recent years, there have been many advances in vehicle technologies based on the efficient use of real-time data provided by embedded sensors. Some of these technologies can help you avoid or reduce the severity of a crash such as the Roll Stability Control (RSC) systems for commercial vehicles. In RSC, several critical variables to consider such as sideslip or roll angle can only be directly measured using expensive equipment. These kind of devices would increase the price of commercial vehicles. Nevertheless, sideslip or roll angle or values can be estimated using MEMS sensors in combination with data fusion algorithms. The objectives stated for this research work consist of integrating roll angle estimators based on Linear and Unscented Kalman filters to evaluate the precision of the results obtained and determining the fulfillment of the hard real-time processing constraints to embed this kind of estimators in IoT architectures based on low-cost equipment able to be deployed in commercial vehicles. An experimental testbed composed of a van with two sets of low-cost kits was set up, the first one including a Raspberry Pi 3 Model B, and the other having an Intel Edison System on Chip. This experimental environment was tested under different conditions for comparison. The results obtained from low-cost experimental kits, based on IoT architectures and including estimators based on Kalman filters, provide accurate roll angle estimation. Also, these results show that the processing time to get the data and execute the estimations based on Kalman Filters fulfill hard real time constraints.

Synthesis-Based Software Architecture Design

NARCIS (Netherlands)

Tekinerdogan, B.; Aksit, Mehmet; Aksit, Mehmet

2001-01-01

During the last decade several architecture design approaches have been introduced. These approaches however have to cope with several obstacles and software architecture design remains a difficult problem. To cope with these obstacles this chapter introduces a novel architecture design approach.

Data distribution architecture based on standard real time protocol

International Nuclear Information System (INIS)

Castro, R.; Vega, J.; Pereira, A.; Portas, A.

2009-01-01

Data distribution architecture (DDAR) has been designed conforming to new requirements, taking into account the type of data that is going to be generated from experiments in International Thermonuclear Experimental Reactor (ITER). The main goal of this architecture is to implement a system that is able to manage on line all data that is being generated by an experiment, supporting its distribution for: processing, storing, analysing or visualizing. The first objective is to have a distribution architecture that supports long pulse experiments (even hours). The described system is able to distribute, using real time protocol (RTP), stored data or live data generated while the experiment is running. It enables researchers to access data on line instead of waiting for the end of the experiment. Other important objective is scalability, so the presented architecture can easily grow based on actual necessities, simplifying estimation and design tasks. A third important objective is security. In this sense, the architecture is based on standards, so complete security mechanisms can be applied, from secure transmission solutions until elaborated access control policies, and it is full compatible with multi-organization federation systems as PAPI or Shibboleth.

Data distribution architecture based on standard real time protocol

Energy Technology Data Exchange (ETDEWEB)

Castro, R. [Asociacion EURATOM/CIEMAT para Fusion, Avda. Complutense No. 22, 28040 Madrid (Spain)], E-mail: rodrigo.castro@ciemat.es; Vega, J.; Pereira, A.; Portas, A. [Asociacion EURATOM/CIEMAT para Fusion, Avda. Complutense No. 22, 28040 Madrid (Spain)

2009-06-15

Data distribution architecture (DDAR) has been designed conforming to new requirements, taking into account the type of data that is going to be generated from experiments in International Thermonuclear Experimental Reactor (ITER). The main goal of this architecture is to implement a system that is able to manage on line all data that is being generated by an experiment, supporting its distribution for: processing, storing, analysing or visualizing. The first objective is to have a distribution architecture that supports long pulse experiments (even hours). The described system is able to distribute, using real time protocol (RTP), stored data or live data generated while the experiment is running. It enables researchers to access data on line instead of waiting for the end of the experiment. Other important objective is scalability, so the presented architecture can easily grow based on actual necessities, simplifying estimation and design tasks. A third important objective is security. In this sense, the architecture is based on standards, so complete security mechanisms can be applied, from secure transmission solutions until elaborated access control policies, and it is full compatible with multi-organization federation systems as PAPI or Shibboleth.

Web based system architecture for long pulse remote experimentation

International Nuclear Information System (INIS)

Heras, E. de las; Lastra, D.; Vega, J.; Castro, R.; Ruiz, M.; Barrera, E.

2010-01-01

Remote experimentation (RE) methods will be essential in next generation fusion devices. Requirements for long pulse RE will be: on-line data visualization, on-line data acquisition processes monitoring and on-line data acquisition systems interactions (start, stop or set-up modifications). Note that these methods are not oriented to real-time control of fusion plant devices. INDRA Sistemas S.A., CIEMAT (Centro de Investigaciones Energeticas Medioambientales y Tecnologicas) and UPM (Universidad Politecnica de Madrid) have designed a specific software architecture for these purposes. The architecture can be supported on the BeansNet platform, whose integration with an application server provides an adequate solution to the requirements. BeansNet is a JINI based framework developed by INDRA, which makes easy the implementation of a remote experimentation model based on a Service Oriented Architecture. The new software architecture has been designed on the basis of the experience acquired in the development of an upgrade of the TJ-II remote experimentation system.

Space and place concepts analysis based on semiology approach in residential architecture

Directory of Open Access Journals (Sweden)

Mojtaba Parsaee

2015-12-01

Full Text Available Space and place are among the fundamental concepts in architecture about which many discussions have been held and the complexity and importance of these concepts were focused on. This research has introduced an approach to better cognition of the architectural concepts based on theory and method of semiology in linguistics. Hence, at first the research investigates the concepts of space and place and explains their characteristics in architecture. Then, it reviews the semiology theory and explores its concepts and ideas. After obtaining the principles of theory and also the method of semiology, they are redefined in an architectural system based on an adaptive method. Finally, the research offers a conceptual model which is called the semiology approach by considering the architectural system as a system of signs. The approach can be used to decode the content of meanings and forms and analyses of the architectural mechanism in order to obtain its meanings and concepts. In this way and based on this approach, the residential architecture of the traditional city of Bushehr – Iran was analyzed as a case of study and its concepts were extracted. The results of this research demonstrate the effectiveness of this approach in structure detection and identification of an architectural system. Besides, this approach has the capability to be used in processes of sustainable development and also be a basis for deconstruction of architectural texts. The research methods of this study are qualitative based on comparative and descriptive analyses.

SOA based Data Architecture for HTML5 Web Applications

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2013-01-01

Full Text Available Web Services based architectures have already been established as the preferred way to integrate SOA specific components, from the front-end to the back-end business services. One of the key elements of such architecture are data-based or entity services. In this context, SDO standard and SDO related technologies have been confirmed as a possible approach to aggregate such enterprise-wide federation of data services, mainly backed by database servers, but not limited to them. In the followings, we will discuss an architectural purpose based on SDO approach to seamlessly integrate presentation and data services within an enterprise SOA context. This way we will outline the benefits of a common end-to-end data integration strategy. Also, we will try to argue that using HTML5 based clients as front end services in conjunction with SDO data services could be an effective strategy to adopt the mobile computing in the enterprise context.

ELISA, a demonstrator environment for information systems architecture design

Science.gov (United States)

Panem, Chantal

1994-01-01

This paper describes an approach of reusability of software engineering technology in the area of ground space system design. System engineers have lots of needs similar to software developers: sharing of a common data base, capitalization of knowledge, definition of a common design process, communication between different technical domains. Moreover system designers need to simulate dynamically their system as early as possible. Software development environments, methods and tools now become operational and widely used. Their architecture is based on a unique object base, a set of common management services and they host a family of tools for each life cycle activity. In late '92, CNES decided to develop a demonstrative software environment supporting some system activities. The design of ground space data processing systems was chosen as the application domain. ELISA (Integrated Software Environment for Architectures Specification) was specified as a 'demonstrator', i.e. a sufficient basis for demonstrations, evaluation and future operational enhancements. A process with three phases was implemented: system requirements definition, design of system architectures models, and selection of physical architectures. Each phase is composed of several activities that can be performed in parallel, with the provision of Commercial Off the Shelves Tools. ELISA has been delivered to CNES in January 94, currently used for demonstrations and evaluations on real projects (e.g. SPOT4 Satellite Control Center). It is on the way of new evolutions.

My Career: Composer

Science.gov (United States)

Morganelli, Patrick

2013-01-01

In this article, the author talks about his career as a composer and offers some advice for aspiring composers. The author works as a composer in the movie industry, creating music that supports a film's story. Other composers work on television shows, and some do both television and film. The composer uses music to tell the audience what kind of…

Decentralized and Modular Electrical Architecture

Science.gov (United States)

Elisabelar, Christian; Lebaratoux, Laurence

2014-08-01

This paper presents the studies made on the definition and design of a decentralized and modular electrical architecture that can be used for power distribution, active thermal control (ATC), standard inputs-outputs electrical interfaces.Traditionally implemented inside central unit like OBC or RTU, these interfaces can be dispatched in the satellite by using MicroRTU.CNES propose a similar approach of MicroRTU. The system is based on a bus called BRIO (Bus Réparti des IO), which is composed, by a power bus and a RS485 digital bus. BRIO architecture is made with several miniature terminals called BTCU (BRIO Terminal Control Unit) distributed in the spacecraft.The challenge was to design and develop the BTCU with very little volume, low consumption and low cost. The standard BTCU models are developed and qualified with a configuration dedicated to ATC, while the first flight model will fly on MICROSCOPE for PYRO actuations and analogue acquisitions. The design of the BTCU is made in order to be easily adaptable for all type of electric interface needs.Extension of this concept is envisaged for power conditioning and distribution unit, and a Modular PCDU based on BRIO concept is proposed.

Collaborative Working Architecture for IoT-Based Applications.

Science.gov (United States)

Mora, Higinio; Signes-Pont, María Teresa; Gil, David; Johnsson, Magnus

2018-05-23

The new sensing applications need enhanced computing capabilities to handle the requirements of complex and huge data processing. The Internet of Things (IoT) concept brings processing and communication features to devices. In addition, the Cloud Computing paradigm provides resources and infrastructures for performing the computations and outsourcing the work from the IoT devices. This scenario opens new opportunities for designing advanced IoT-based applications, however, there is still much research to be done to properly gear all the systems for working together. This work proposes a collaborative model and an architecture to take advantage of the available computing resources. The resulting architecture involves a novel network design with different levels which combines sensing and processing capabilities based on the Mobile Cloud Computing (MCC) paradigm. An experiment is included to demonstrate that this approach can be used in diverse real applications. The results show the flexibility of the architecture to perform complex computational tasks of advanced applications.

Trust information-based privacy architecture for ubiquitous health.

Science.gov (United States)

Ruotsalainen, Pekka Sakari; Blobel, Bernd; Seppälä, Antto; Nykänen, Pirkko

2013-10-08

Ubiquitous health is defined as a dynamic network of interconnected systems that offers health services independent of time and location to a data subject (DS). The network takes place in open and unsecure information space. It is created and managed by the DS who sets rules that regulate the way personal health information is collected and used. Compared to health care, it is impossible in ubiquitous health to assume the existence of a priori trust between the DS and service providers and to produce privacy using static security services. In ubiquitous health features, business goals and regulations systems followed often remain unknown. Furthermore, health care-specific regulations do not rule the ways health data is processed and shared. To be successful, ubiquitous health requires novel privacy architecture. The goal of this study was to develop a privacy management architecture that helps the DS to create and dynamically manage the network and to maintain information privacy. The architecture should enable the DS to dynamically define service and system-specific rules that regulate the way subject data is processed. The architecture should provide to the DS reliable trust information about systems and assist in the formulation of privacy policies. Furthermore, the architecture should give feedback upon how systems follow the policies of DS and offer protection against privacy and trust threats existing in ubiquitous environments. A sequential method that combines methodologies used in system theory, systems engineering, requirement analysis, and system design was used in the study. In the first phase, principles, trust and privacy models, and viewpoints were selected. Thereafter, functional requirements and services were developed on the basis of a careful analysis of existing research published in journals and conference proceedings. Based on principles, models, and requirements, architectural components and their interconnections were developed using system

Trust-based information system architecture for personal wellness.

Science.gov (United States)

Ruotsalainen, Pekka; Nykänen, Pirkko; Seppälä, Antto; Blobel, Bernd

2014-01-01

Modern eHealth, ubiquitous health and personal wellness systems take place in an unsecure and ubiquitous information space where no predefined trust occurs. This paper presents novel information model and an architecture for trust based privacy management of personal health and wellness information in ubiquitous environment. The architecture enables a person to calculate a dynamic and context-aware trust value for each service provider, and using it to design personal privacy policies for trustworthy use of health and wellness services. For trust calculation a novel set of measurable context-aware and health information-sensitive attributes is developed. The architecture enables a person to manage his or her privacy in ubiquitous environment by formulating context-aware and service provider specific policies. Focus groups and information modelling was used for developing a wellness information model. System analysis method based on sequential steps that enable to combine results of analysis of privacy and trust concerns and the selection of trust and privacy services was used for development of the information system architecture. Its services (e.g. trust calculation, decision support, policy management and policy binding services) and developed attributes enable a person to define situation-aware policies that regulate the way his or her wellness and health information is processed.

On the proposal of an intelligent support system with a cognitive architecture based on contextual modules for the operators of nuclear power plants

International Nuclear Information System (INIS)

Soares, Herculano Vieira; Alvarenga, Marco Antonio Bayout; Schirru, Roberto

2007-01-01

The operators' actions in a control room of a nuclear power plant are controlled by production rules in the emergency procedures of the operation manual. For each accident, there is a specific group of safety tasks composed of a set of specified actions. In this work we propose an intelligent support system based on a cognitive architecture composed of contextual modules, instead of functional modules. This approach consists on the determination of a task space, where we can define subspaces. In the subspaces where the set of values of the parameters is familiar, at least one of the rules in the procedural memory has its conditions completely satisfied. In this context, the proposed support system will be guided by an expert system, with a procedural memory composed of IF - THEN rules, that contains the input conditions with strict values of the parameters in the IF part, and a corresponding safety task in the THEN part. When the operator is in a situation in which the set of values of those variables falls in a non-familiar context, none of the rules in the procedural memory will have its conditions completely satisfied. In this context, it will be, then, utilized the connectionist part of the architecture, a fuzzy neural network (with radial activation functions), to classify the set of parameters and to choose a set of safety tasks applicable to the situation. The fuzzy logic provides an inference mechanism under uncertainty, while the neural network offers advantages of learning, adaptation, failure tolerance, parallelism and generalization. (author)

Passion fruit-like nano-architectures: a general synthesis route

Science.gov (United States)

Cassano, D.; David, J.; Luin, S.; Voliani, V.

2017-03-01

Noble metal nanostructures have demonstrated a number of intriguing features for both medicine and catalysis. However, accumulation issues have prevented their clinical translation, while their use in catalysis has shown serious efficiency and stability hurdles. Here we introduce a simple and robust synthetic protocol for passion fruit-like nano-architectures composed by a silica shell embedding polymeric arrays of ultrasmall noble metal nanoparticles. These nano-architectures show interesting features for both oncology and catalysis. They avoid the issue of persistence in organism thanks to their fast biodegradation in renal clearable building blocks. Furthermore, their calcination results in yolk-shell structures composed by naked metal or alloy nanospheres shielded from aggregation by a silica shell.

Researching on knowledge architecture of design by analysis based on ASME code

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2003-01-01

The quality of knowledge-based system's knowledge architecture is one of decisive factors of knowledge-based system's validity and rationality. For designing the ASME code knowledge based system, this paper presents a knowledge acquisition method which is extracting knowledge through document analysis consulted domain experts' knowledge. Then the paper describes knowledge architecture of design by analysis based on the related rules in ASME code. The knowledge of the knowledge architecture is divided into two categories: one is empirical knowledge, and another is ASME code knowledge. Applied as the basement of the knowledge architecture, a general procedural process of design by analysis that is met the engineering design requirements and designers' conventional mode is generalized and explained detailed in the paper. For the sake of improving inference efficiency and concurrent computation of KBS, a kind of knowledge Petri net (KPN) model is proposed and adopted in expressing the knowledge architecture. Furthermore, for validating and verifying of the empirical rules, five knowledge validation and verification theorems are given in the paper. Moreover the research production is applicable to design the knowledge architecture of ASME codes or other engineering standards. (author)

The NA60 experiment readout architecture

CERN Document Server

Floris, M; Usai, G L; David, A; Rosinsky, P; Ohnishi, H

2004-01-01

The NA60 experiment was designed to identify signatures of a new state of matter, the Quark Gluon Plasma, in heavy-ion collisions at the CERN Super Proton Synchroton. The apparatus is composed of four main detectors: a muon spectrometer (MS), a zero degree calorimeter (ZDC), a silicon vertex telescope (VT), and a silicon microstrip beam tracker (BT). The readout of the whole experiment is based on a PCI architecture. The basic unit is a general purpose PCI card, interfaced to the different subdetectors via custom mezzanine cards. This allowed us to successfully implement several completely different readout protocols (from the VME like protocol of the MS to the custom protocol of the pixel telescope). The system was fully tested with proton and ion beams, and several million events were collected in 2002 and 2003. This paper presents the readout architecture of NA60, with particular emphasis on the PCI layer common to all the subdetectors. (16 refs).

Architecture-based Model for Preventive and Operative Crisis Management

National Research Council Canada - National Science Library

Jungert, Erland; Derefeldt, Gunilla; Hallberg, Jonas; Hallberg, Niklas; Hunstad, Amund; Thuren, Ronny

2004-01-01

.... A system that should support activities of this type must not only have a high capacity, with respect to the dataflow, but also have suitable tools for decision support. To overcome these problems, an architecture for preventive and operative crisis management is proposed. The architecture is based on models for command and control, but also for risk analysis.

Hybrid Power Management-Based Vehicle Architecture

Science.gov (United States)

Eichenberg, Dennis J.

2011-01-01

Hybrid Power Management (HPM) is the integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications (s ee figure). The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, that provides all power to a common energy storage system that is used to power the drive motors and vehicle accessory systems. This architecture also provides power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. The key element of HPM is the energy storage system. All generated power is sent to the energy storage system, and all loads derive their power from that system. This can significantly reduce the power requirement of the primary power source, while increasing the vehicle reliability. Ultracapacitors are ideal for an HPM-based energy storage system due to their exceptionally long cycle life, high reliability, high efficiency, high power density, and excellent low-temperature performance. Multiple power sources and multiple loads are easily incorporated into an HPM-based vehicle. A gas turbine is a good primary power source because of its high efficiency, high power density, long life, high reliability, and ability to operate on a wide range of fuels. An HPM controller maintains optimal control over each vehicle component. This flexible operating system can be applied to all vehicles to considerably improve vehicle efficiency, reliability, safety, security, and performance. The HPM-based vehicle architecture has many advantages over conventional vehicle architectures. Ultracapacitors have a much longer cycle life than batteries, which greatly improves system reliability, reduces life-of-system costs, and reduces environmental impact as ultracapacitors will probably never need to be

Teaching Composing with an Identity as a Teacher-Composer

Science.gov (United States)

Francis, Jennie

2012-01-01

I enjoy composing and feel able to write songs that I like and which feel significant to me. This has not always been the case and the change had nothing to do with my school education or my degree. Composing at secondary school did not move beyond Bach and Handel pastiche. I did not take any composing courses during my degree. What did influence…

A Multi-Time Scale Morphable Software Milieu for Polymorphous Computing Architectures (PCA) - Composable, Scalable Systems

National Research Council Canada - National Science Library

Skjellum, Anthony

2004-01-01

Polymorphous Computing Architectures (PCA) rapidly "morph" (reorganize) software and hardware configurations in order to achieve high performance on computation styles ranging from specialized streaming to general threaded applications...

Proposed hardware architectures of particle filter for object tracking

Science.gov (United States)

Abd El-Halym, Howida A.; Mahmoud, Imbaby Ismail; Habib, SED

2012-12-01

In this article, efficient hardware architectures for particle filter (PF) are presented. We propose three different architectures for Sequential Importance Resampling Filter (SIRF) implementation. The first architecture is a two-step sequential PF machine, where particle sampling, weight, and output calculations are carried out in parallel during the first step followed by sequential resampling in the second step. For the weight computation step, a piecewise linear function is used instead of the classical exponential function. This decreases the complexity of the architecture without degrading the results. The second architecture speeds up the resampling step via a parallel, rather than a serial, architecture. This second architecture targets a balance between hardware resources and the speed of operation. The third architecture implements the SIRF as a distributed PF composed of several processing elements and central unit. All the proposed architectures are captured using VHDL synthesized using Xilinx environment, and verified using the ModelSim simulator. Synthesis results confirmed the resource reduction and speed up advantages of our architectures.

Adolescents' Dialogic Composing with Mobile Phones

Science.gov (United States)

Warner, Julie

2016-01-01

This 14-month study examined the phone-based composing practice of three adolescents. Given the centrality of mobile phones to youth culture, the researcher sought to create a description of the participants' composing practices with these devices. Focal participants were users of Twitter and Instagram, two social media platforms that are usually…

Application-specific mesh-based heterogeneous FPGA architectures

CERN Document Server

Parvez, Husain

2011-01-01

This volume presents a new exploration environment for mesh-based, heterogeneous FPGA architectures. Readers will find a description of state-of-the-art techniques for reducing area requirements, which both increase performance and enable power reduction.

VLSI Architectures for Sliding-Window-Based Space-Time Turbo Trellis Code Decoders

Directory of Open Access Journals (Sweden)

Georgios Passas

2012-01-01

Full Text Available The VLSI implementation of SISO-MAP decoders used for traditional iterative turbo coding has been investigated in the literature. In this paper, a complete architectural model of a space-time turbo code receiver that includes elementary decoders is presented. These architectures are based on newly proposed building blocks such as a recursive add-compare-select-offset (ACSO unit, A-, B-, Γ-, and LLR output calculation modules. Measurements of complexity and decoding delay of several sliding-window-technique-based MAP decoder architectures and a proposed parameter set lead to defining equations and comparison between those architectures.

Interface-based software integration

Directory of Open Access Journals (Sweden)

Aziz Ahmad Rais

2016-07-01

Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

High Dynamic Range adaptive ΔΣ-based Focal Plane Array architecture

KAUST Repository

Yao, Shun

2012-10-16

In this paper, an Adaptive Delta-Sigma based architecture for High Dynamic Range (HDR) Focal Plane Arrays is presented. The noise shaping effect of the Delta-Sigma modulation in the low end, and the distortion noise induced in the high end of Photo-diode current were analyzed in detail. The proposed architecture can extend the DR for about 20N log2 dB at the high end of Photo-diode current with an N bit Up-Down counter. At the low end, it can compensate for the larger readout noise by employing Extended Counting. The Adaptive Delta-Sigma architecture employing a 4-bit Up-Down counter achieved about 160dB in the DR, with a Peak SNR (PSNR) of 80dB at the high end. Compared to the other HDR architectures, the Adaptive Delta-Sigma based architecture provides the widest DR with the best SNR performance in the extended range.

A Reference Architecture for a Cloud-Based Tools as a Service Workspace

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

2015-01-01

Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

Switch/router architectures shared-bus and shared-memory based systems

CERN Document Server

Aweya, James

2018-01-01

A practicing engineer's inclusive review of communication systems based on shared-bus and shared-memory switch/router architectures. This book delves into the inner workings of router and switch design in a comprehensive manner that is accessible to a broad audience. It begins by describing the role of switch/routers in a network, then moves on to the functional composition of a switch/router. A comparison of centralized versus distributed design of the architecture is also presented. The author discusses use of bus versus shared-memory for communication within a design, and also covers Quality of Service (QoS) mechanisms and configuration tools. Written in a simple style and language to allow readers to easily understand and appreciate the material presented, Switch/Router Architectures: Shared-Bus and Shared-Memory Based Systems discusses the design of multilayer switches—starting with the basic concepts and on to the basic architectures. It describes the evolution of multilayer switch designs and highli...

Outline of a novel architecture for cortical computation

OpenAIRE

Majumdar, Kaushik

2007-01-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses only. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortica...

Cloud-based Architecture Capabilities Summary Report

Energy Technology Data Exchange (ETDEWEB)

Vang, Leng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Prescott, Steven R [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

In collaborating scientific research arena it is important to have an environment where analysts have access to a shared of information documents, software tools and be able to accurately maintain and track historical changes in models. A new cloud-based environment would be accessible remotely from anywhere regardless of computing platforms given that the platform has available of Internet access and proper browser capabilities. Information stored at this environment would be restricted based on user assigned credentials. This report reviews development of a Cloud-based Architecture Capabilities (CAC) as a web portal for PRA tools.

Experiencing a Problem-Based Learning Approach for Teaching Reconfigurable Architecture Design

Directory of Open Access Journals (Sweden)

Erwan Fabiani

2009-01-01

Full Text Available This paper presents the “reconfigurable computing” teaching part of a computer science master course (first year on parallel architectures. The practical work sessions of this course rely on active pedagogy using problem-based learning, focused on designing a reconfigurable architecture for the implementation of an application class of image processing algorithms. We show how the successive steps of this project permit the student to experiment with several fundamental concepts of reconfigurable computing at different levels. Specific experiments include exploitation of architectural parallelism, dataflow and communicating component-based design, and configurability-specificity tradeoffs.

How organisation of architecture documentation affects architectural knowledge retrieval

NARCIS (Netherlands)

de Graaf, K.A.; Liang, P.; Tang, A.; Vliet, J.C.

A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional arrangement of the architectural knowledge. Knowledge retrieval from file-based architecture documentation is efficient if the organisation of

A High Performance COTS Based Computer Architecture

Science.gov (United States)

Patte, Mathieu; Grimoldi, Raoul; Trautner, Roland

2014-08-01

Using Commercial Off The Shelf (COTS) electronic components for space applications is a long standing idea. Indeed the difference in processing performance and energy efficiency between radiation hardened components and COTS components is so important that COTS components are very attractive for use in mass and power constrained systems. However using COTS components in space is not straightforward as one must account with the effects of the space environment on the COTS components behavior. In the frame of the ESA funded activity called High Performance COTS Based Computer, Airbus Defense and Space and its subcontractor OHB CGS have developed and prototyped a versatile COTS based architecture for high performance processing. The rest of the paper is organized as follows: in a first section we will start by recapitulating the interests and constraints of using COTS components for space applications; then we will briefly describe existing fault mitigation architectures and present our solution for fault mitigation based on a component called the SmartIO; in the last part of the paper we will describe the prototyping activities executed during the HiP CBC project.

A Web-based Architecture Enabling Multichannel Telemedicine Applications

Directory of Open Access Journals (Sweden)

Fabrizio Lamberti

2003-02-01

Full Text Available Telemedicine scenarios include today in-hospital care management, remote teleconsulting, collaborative diagnosis and emergency situations handling. Different types of information need to be accessed by means of etherogeneous client devices in different communication environments in order to enable high quality continuous sanitary assistance delivery wherever and whenever needed. In this paper, a Web-based telemedicine architecture based on Java, XML and XSL technologies is presented. By providing dynamic content delivery services and Java based client applications for medical data consultation and modification, the system enables effective access to an Electronic Patient Record based standard database by means of any device equipped with a Web browser, such as traditional Personal Computers and workstation as well as modern Personal Digital Assistants. The effectiveness of the proposed architecture has been evaluated in different scenarios, experiencing fixed and mobile clinical data transmissions over Local Area Networks, wireless LANs and wide coverage telecommunication network including GSM and GPRS.

THE BAGATELLE GENRE AND ITS REALIZATION IN THE CREATION OF COMPOSER NICOLAE CIOLAC

Directory of Open Access Journals (Sweden)

ANDRONOVICI-RUSU ADELA

2015-09-01

Full Text Available In the present paper there is an excursion into the history of the bagatelle genre. Initially conceived as a piece of minor importance, with a moderate instrumental-technical aspect that belongs to „easy” pieces for interpretation, the bagatelle dur­ing its evolution, obtained a status of an aphoristic musical genre in which a profound ideative content is essentially conveyed in a laconic, concentrated form. Further are analyzed five Bagatelles for piano written by composer Nicolae Ciolac. The author considers the thematic and architectural problems of the opus, as well as some speciic interpretative peculiarities. In conclu­sion it is affirmed that the analyzed bagatelles represent s group of pieces novel for Moldovan composition that has at its base a logic characteristic of the miniature genre.

An agent-based architecture for multimodal interaction

NARCIS (Netherlands)

Jonker, C.M.; Treur, J.; Wijngaards, W.C.A.

In this paper, an executable generic process model is proposed for combined verbal and non-verbal communication processes and their interaction. The agent-based architecture can be used to create multimodal interaction. The generic process model has been designed, implemented and used to simulate

An agent-based architecture for multimodal interaction

NARCIS (Netherlands)

Jonker, C.M.; Treur, J.; Wijngaards, W.C.A.

2001-01-01

In this paper, an executable generic process model is proposed for combined verbal and non-verbal communication processes and their interaction. The agent-based architecture can be used to create multimodal interaction. The generic process model has been designed, implemented and used to simulate

Tree-based server-middleman-client architecture: improving scalability and reliability for voting-based network games in ad hoc wireless networks

Science.gov (United States)

Guo, Y.; Fujinoki, H.

2006-10-01

The concept of a new tree-based architecture for networked multi-player games was proposed by Matuszek to improve scalability in network traffic at the same time to improve reliability. The architecture (we refer it as "Tree-Based Server- Middlemen-Client architecture") will solve the two major problems in ad-hoc wireless networks: frequent link failures and significance in battery power consumption at wireless transceivers by using two new techniques, recursive aggregation of client messages and subscription-based propagation of game state. However, the performance of the TBSMC architecture has never been quantitatively studied. In this paper, the TB-SMC architecture is compared with the client-server architecture using simulation experiments. We developed an event driven simulator to evaluate the performance of the TB-SMC architecture. In the network traffic scalability experiments, the TB-SMC architecture resulted in less than 1/14 of the network traffic load for 200 end users. In the reliability experiments, the TB-SMC architecture improved the number of successfully delivered players' votes by 31.6, 19.0, and 12.4% from the clientserver architecture at high (failure probability of 90%), moderate (50%) and low (10%) failure probability.

Security Issues for Intelligence Information System based on Service-Oriented Architecture

OpenAIRE

Ackoski, Jugoslav; Trajkovik, Vladimir; Davcev, Danco

2011-01-01

Security is important requirement for service-oriented architecture (SOA), because SOA considers widespread services on different location and diverse operational platforms. Main challenge for SOA Security still drifts around “clouds” and that is insufficient frameworks for security models based on consistent and convenient methods. Contemporary security architectures and security protocols are in the phase of developing. SOA based systems are characterized with differences ...

A Systematic Mapping Study of Software Architectures for Cloud Based Systems

DEFF Research Database (Denmark)

Chauhan, Muhammad Aufeef; Babar, Muhammad Ali

2014-01-01

Context: Cloud computing has gained significant attention of researchers and practitioners. This emerging paradigm is being used to provide solutions in multiple domains without huge upfront investment because of its on demand recourse-provisioning model. However, the information about how software...... of this study is to systematically identify and analyze the currently published research on the topics related to software architectures for cloud-based systems in order to identify architecture solutions for achieving quality requirements. Method: We decided to carry out a systematic mapping study to find...... as much peer-reviewed literature on the topics related to software architectures for cloud-based systems as possible. This study has been carried out by following the guidelines for conducting systematic literature reviews and systematic mapping studies as reported in the literature. Based on our paper...

Composing and Arranging Careers

Science.gov (United States)

Schwartz, Elliott; And Others

1977-01-01

With the inspiration, the originality, the skill and craftsmanship, the business acumen, the patience, and the luck, it's possible to become a classical composer, pop/rock/country composer, jingle composer, or educational composer. Describes these careers. (Editor/RK)

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l inge.vestergaard@aarch.dk Based on the repetitive architecture from the "building boom" 1960...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...... to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...

A provider based accounting architecture

NARCIS (Netherlands)

Parhonyi, R.; Quartel, D.; Pras, A.

2002-01-01

This paper presents a novel content accounting architecture. Content accounting is becoming increasingly important since it is anticipated that in the near future more billable content on the Internet will be published. The architecture presented in this paper has a distributed functionality and an

Preparation of 3D graphene-based architectures and their applications in supercapacitors

Directory of Open Access Journals (Sweden)

Zhuxian Yang

2015-12-01

Full Text Available Three dimensional (3D graphene-based architectures such as 3D graphene-based hydrogels, aerogels, foams, and sponges have attracted huge attention owing to the combination of the structural interconnectivities and the outstanding properties of graphene which offer these interesting structures with low density, high porosity, large surface area, stable mechanical properties, fast mass and electron transport. They have been extensively studied for a wide range of applications including capacitors, batteries, sensors, catalyst, etc. There are several reviews focusing on the 3D graphene-based architectures and their applications. In this work, we only summarise the latest development on the preparation of 3D graphene-based architectures and their applications in supercapacitors, with emphasis on the preparation strategies.

Scaling architecture-on-demand based optical networks

NARCIS (Netherlands)

Meyer, Hugo; Sancho, Jose Carlos; Mrdakovic, Milica; Peng, Shuping; Simeonidou, Dimitra; Miao, Wang; Calabretta, Nicola

2016-01-01

This paper analyzes methodologies that allow scaling properly Architecture-On-Demand (AoD) based optical networks. As Data Centers and HPC systems are growing in size and complexity, optical networks seem to be the way to scale the bandwidth of current network infrastructures. To scale the number of

Agent-based Personal Network (PN) service architecture

DEFF Research Database (Denmark)

Jiang, Bo; Olesen, Henning

2004-01-01

In this paper we proposte a new concept for a centralized agent system as the solution for the PN service architecture, which aims to efficiently control and manage the PN resources and enable the PN based services to run seamlessly over different networks and devices. The working principle...

Developing product families based on architectures

DEFF Research Database (Denmark)

Harlou, Ulf

2006-01-01

family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

An e-consent-based shared EHR system architecture for integrated healthcare networks.

Science.gov (United States)

Bergmann, Joachim; Bott, Oliver J; Pretschner, Dietrich P; Haux, Reinhold

2007-01-01

Virtual integration of distributed patient data promises advantages over a consolidated health record, but raises questions mainly about practicability and authorization concepts. Our work aims on specification and development of a virtual shared health record architecture using a patient-centred integration and authorization model. A literature survey summarizes considerations of current architectural approaches. Complemented by a methodical analysis in two regional settings, a formal architecture model was specified and implemented. Results presented in this paper are a survey of architectural approaches for shared health records and an architecture model for a virtual shared EHR, which combines a patient-centred integration policy with provider-oriented document management. An electronic consent system assures, that access to the shared record remains under control of the patient. A corresponding system prototype has been developed and is currently being introduced and evaluated in a regional setting. The proposed architecture is capable of partly replacing message-based communications. Operating highly available provider repositories for the virtual shared EHR requires advanced technology and probably means additional costs for care providers. Acceptance of the proposed architecture depends on transparently embedding document validation and digital signature into the work processes. The paradigm shift from paper-based messaging to a "pull model" needs further evaluation.

Outline of a novel architecture for cortical computation.

Science.gov (United States)

Majumdar, Kaushik

2008-03-01

In this paper a novel architecture for cortical computation has been proposed. This architecture is composed of computing paths consisting of neurons and synapses. These paths have been decomposed into lateral, longitudinal and vertical components. Cortical computation has then been decomposed into lateral computation (LaC), longitudinal computation (LoC) and vertical computation (VeC). It has been shown that various loop structures in the cortical circuit play important roles in cortical computation as well as in memory storage and retrieval, keeping in conformity with the molecular basis of short and long term memory. A new learning scheme for the brain has also been proposed and how it is implemented within the proposed architecture has been explained. A few mathematical results about the architecture have been proposed, some of which are without proof.

SiC: An Agent Based Architecture for Preventing and Detecting Attacks to Ubiquitous Databases

Science.gov (United States)

Pinzón, Cristian; de Paz, Yanira; Bajo, Javier; Abraham, Ajith; Corchado, Juan M.

One of the main attacks to ubiquitous databases is the structure query language (SQL) injection attack, which causes severe damages both in the commercial aspect and in the user’s confidence. This chapter proposes the SiC architecture as a solution to the SQL injection attack problem. This is a hierarchical distributed multiagent architecture, which involves an entirely new approach with respect to existing architectures for the prevention and detection of SQL injections. SiC incorporates a kind of intelligent agent, which integrates a case-based reasoning system. This agent, which is the core of the architecture, allows the application of detection techniques based on anomalies as well as those based on patterns, providing a great degree of autonomy, flexibility, robustness and dynamic scalability. The characteristics of the multiagent system allow an architecture to detect attacks from different types of devices, regardless of the physical location. The architecture has been tested on a medical database, guaranteeing safe access from various devices such as PDAs and notebook computers.

An incentive-based architecture for social recommendations

KAUST Repository

Bhattacharjee, Rajat; Goel, Ashish; Kollias, Konstantinos

2009-01-01

We present an incentive-based architecture for providing recommendations in a social network. We maintain a distinct reputation system for each individual and we rely on users to identify appropriate correlations and rate the items using a system-provided recommendation language. The key idea is to design an incentive structure and a ranking system such that any inaccuracy in the recommendations implies the existence of a profitable arbitrage opportunity, hence making the system resistant to malicious spam and presentation bias. We also show that, under mild assumptions, our architecture provides users with incentive to minimize the Kullback-Leibler divergence between the ratings and the actual item qualities, quickly driving the system to an equilibrium state with accurate recommendations. Copyright 2009 ACM.

An efficient interpolation filter VLSI architecture for HEVC standard

Science.gov (United States)

Zhou, Wei; Zhou, Xin; Lian, Xiaocong; Liu, Zhenyu; Liu, Xiaoxiang

2015-12-01

The next-generation video coding standard of High-Efficiency Video Coding (HEVC) is especially efficient for coding high-resolution video such as 8K-ultra-high-definition (UHD) video. Fractional motion estimation in HEVC presents a significant challenge in clock latency and area cost as it consumes more than 40 % of the total encoding time and thus results in high computational complexity. With aims at supporting 8K-UHD video applications, an efficient interpolation filter VLSI architecture for HEVC is proposed in this paper. Firstly, a new interpolation filter algorithm based on the 8-pixel interpolation unit is proposed in this paper. It can save 19.7 % processing time on average with acceptable coding quality degradation. Based on the proposed algorithm, an efficient interpolation filter VLSI architecture, composed of a reused data path of interpolation, an efficient memory organization, and a reconfigurable pipeline interpolation filter engine, is presented to reduce the implement hardware area and achieve high throughput. The final VLSI implementation only requires 37.2k gates in a standard 90-nm CMOS technology at an operating frequency of 240 MHz. The proposed architecture can be reused for either half-pixel interpolation or quarter-pixel interpolation, which can reduce the area cost for about 131,040 bits RAM. The processing latency of our proposed VLSI architecture can support the real-time processing of 4:2:0 format 7680 × 4320@78fps video sequences.

Service oriented architecture assessment based on software components

Directory of Open Access Journals (Sweden)

Mahnaz Amirpour

2016-01-01

Full Text Available Enterprise architecture, with detailed descriptions of the functions of information technology in the organization, tries to reduce the complexity of technology applications resulting in tools with greater efficiency in achieving the objectives of the organization. Enterprise architecture consists of a set of models describing this technology in different components performance as well as various aspects of the applications in any organization. Therefore, information technology development and maintenance management can perform well within organizations. This study aims to suggest a method to identify different types of services in service-oriented architecture analysis step that applies some previous approaches in an integrated form and, based on the principles of software engineering, to provide a simpler and more transparent approach through the expression of analysis details. Advantages and disadvantages of proposals should be evaluated before the implementation and costs allocation. Evaluation methods can better identify strengths and weaknesses of the current situation apart from selecting appropriate model out of several suggestions, and clarify this technology development solution for organizations in the future. We will be able to simulate data and processes flow within the organization by converting the output of the model to colored Petri nets and evaluate and test it by examining various inputs to enterprise architecture before implemented in terms of reliability and response time. A model of application has been studied for the proposed model and the results can describe and design architecture for data.

A Potential Transmitter Architecture for Future Generation Green Wireless Base Station

Directory of Open Access Journals (Sweden)

Mike Faulkner

2009-01-01

Full Text Available Current radio frequency power amplifiers in 3G base stations have very high power consumption leading to a hefty cost and negative environmental impact. In this paper, we propose a potential architecture design for future wireless base station. Issues associated with components of the architecture are investigated. The all-digital transmitter architecture uses a combination of envelope elimination and restoration (EER and pulse width modulation (PWM/pulse position modulation (PPM modulation. The performance of this architecture is predicted from the measured output power and efficiency curves of a GaN amplifier. 57% efficiency is obtained for an OFDM signal limited to 8 dB peak to average power ratio. The PWM/PPM drive signal is generated using the improved Cartesian sigma delta techniques. It is shown that an RF oversampling by a factor of four meets the WLAN spectral mask, and WCDMA specification is met by an RF oversampling of sixteen.

A Potential Transmitter Architecture for Future Generation Green Wireless Base Station

Directory of Open Access Journals (Sweden)

Cijvat Ellie

2009-01-01

Full Text Available Abstract Current radio frequency power amplifiers in 3G base stations have very high power consumption leading to a hefty cost and negative environmental impact. In this paper, we propose a potential architecture design for future wireless base station. Issues associated with components of the architecture are investigated. The all-digital transmitter architecture uses a combination of envelope elimination and restoration (EER and pulse width modulation (PWM/pulse position modulation (PPM modulation. The performance of this architecture is predicted from the measured output power and efficiency curves of a GaN amplifier. 57% efficiency is obtained for an OFDM signal limited to 8 dB peak to average power ratio. The PWM/PPM drive signal is generated using the improved Cartesian sigma delta techniques. It is shown that an RF oversampling by a factor of four meets the WLAN spectral mask, and WCDMA specification is met by an RF oversampling of sixteen.

A Coupled Simulation Architecture for Agent-Based/Geohydrological Modelling

Science.gov (United States)

Jaxa-Rozen, M.

2016-12-01

The quantitative modelling of social-ecological systems can provide useful insights into the interplay between social and environmental processes, and their impact on emergent system dynamics. However, such models should acknowledge the complexity and uncertainty of both of the underlying subsystems. For instance, the agent-based models which are increasingly popular for groundwater management studies can be made more useful by directly accounting for the hydrological processes which drive environmental outcomes. Conversely, conventional environmental models can benefit from an agent-based depiction of the feedbacks and heuristics which influence the decisions of groundwater users. From this perspective, this work describes a Python-based software architecture which couples the popular NetLogo agent-based platform with the MODFLOW/SEAWAT geohydrological modelling environment. This approach enables users to implement agent-based models in NetLogo's user-friendly platform, while benefiting from the full capabilities of MODFLOW/SEAWAT packages or reusing existing geohydrological models. The software architecture is based on the pyNetLogo connector, which provides an interface between the NetLogo agent-based modelling software and the Python programming language. This functionality is then extended and combined with Python's object-oriented features, to design a simulation architecture which couples NetLogo with MODFLOW/SEAWAT through the FloPy library (Bakker et al., 2016). The Python programming language also provides access to a range of external packages which can be used for testing and analysing the coupled models, which is illustrated for an application of Aquifer Thermal Energy Storage (ATES).

One-dimension-based spatially ordered architectures for solar energy conversion.

Science.gov (United States)

Liu, Siqi; Tang, Zi-Rong; Sun, Yugang; Colmenares, Juan Carlos; Xu, Yi-Jun

2015-08-07

The severe consequences of fossil fuel consumption have resulted in a need for alternative sustainable sources of energy. Conversion and storage of solar energy via a renewable method, such as photocatalysis, holds great promise as such an alternative. One-dimensional (1D) nanostructures have gained attention in solar energy conversion because they have a long axis to absorb incident sunlight yet a short radial distance for separation of photogenerated charge carriers. In particular, well-ordered spatially high dimensional architectures based on 1D nanostructures with well-defined facets or anisotropic shapes offer an exciting opportunity for bridging the gap between 1D nanostructures and the micro and macro world, providing a platform for integration of nanostructures on a larger and more manageable scale into high-performance solar energy conversion applications. In this review, we focus on the progress of photocatalytic solar energy conversion over controlled one-dimension-based spatially ordered architecture hybrids. Assembly and classification of these novel architectures are summarized, and we discuss the opportunity and future direction of integration of 1D materials into high-dimensional, spatially organized architectures, with a perspective toward improved collective performance in various artificial photoredox applications.

Performances of multiprocessor multidisk architectures for continuous media storage

Science.gov (United States)

Gennart, Benoit A.; Messerli, Vincent; Hersch, Roger D.

1996-03-01

Multimedia interfaces increase the need for large image databases, capable of storing and reading streams of data with strict synchronicity and isochronicity requirements. In order to fulfill these requirements, we consider a parallel image server architecture which relies on arrays of intelligent disk nodes, each disk node being composed of one processor and one or more disks. This contribution analyzes through bottleneck performance evaluation and simulation the behavior of two multi-processor multi-disk architectures: a point-to-point architecture and a shared-bus architecture similar to current multiprocessor workstation architectures. We compare the two architectures on the basis of two multimedia algorithms: the compute-bound frame resizing by resampling and the data-bound disk-to-client stream transfer. The results suggest that the shared bus is a potential bottleneck despite its very high hardware throughput (400Mbytes/s) and that an architecture with addressable local memories located closely to their respective processors could partially remove this bottleneck. The point- to-point architecture is scalable and able to sustain high throughputs for simultaneous compute- bound and data-bound operations.

Art of Film – A Way of Architectural Communication

Directory of Open Access Journals (Sweden)

Liliana Petrovici

2009-01-01

Full Text Available The art of film, the most popular art of the 20th century, can represent for architecture a means of teaching and promoting its specific values, an inspirational source and a good example of efficient and accessible cultural communication. The architecture presents many resemblances with the world of film regarding the concept and space exploring for communicating some ideas or concepts. Both film and architecture have narrative qualities, work with the world of illusions and representations and compose various elements in order to carry on certain significances. The film makers are making available the suggestive and semantic potential of architecture to render states and attitudes, to outline certain meanings or to emit opinions and comments on political, psychological and social issues.

Intelligent perception control based on a blackboard architecture

International Nuclear Information System (INIS)

Taibi, I.; Koenig, A.; Vacherand, F.

1991-01-01

In this paper, is described the intelligent perception control system GESPER which is presently equipped with a set of three cameras, a telemeter and a camera associated with a structured strip light. This system is of great interest for all our robotic applications as it is capable of autonomously planning, triggering acquisitions, integrating and interpreting multisensory data. The GESPER architecture, based on the blackboard model, provides a generic development method for indoor and outdoor perception. The modularity and the independence of the knowledge sources make the software evolving easily without breaking down the architecture. New sensors and/or new data processing can be integrated by the addition of new knowledge sources that modelize them. At present, first results are obtained in our testbed hall which simulates the nuclear plant as gives similar experimental conditions. Our ongoing research concerns the improvement of fusion algorithms and the embedding of the whole system (hardware and software) on target robots and distributed architecture

Greening radio access networks using distributed base station architectures

DEFF Research Database (Denmark)

Kardaras, Georgios; Soler, José; Dittmann, Lars

2010-01-01

Several actions for developing environmentally friendly technologies have been taken in most industrial fields. Significant resources have also been devoted in mobile communications industry. Moving towards eco-friendly alternatives is primarily a social responsibility for network operators....... However besides this, increasing energy efficiency represents a key factor for reducing operating expenses and deploying cost effective mobile networks. This paper presents how distributed base station architectures can contribute in greening radio access networks. More specifically, the advantages...... energy saving. Different subsystems have to be coordinated real-time and intelligent network nodes supporting complicated functionalities are necessary. Distributed base station architectures are ideal for this purpose mainly because of their high degree of configurability and self...

Model-based security analysis of the German health card architecture.

Science.gov (United States)

Jürjens, J; Rumm, R

2008-01-01

Health-care information systems are particularly security-critical. In order to make these applications secure, the security analysis has to be an integral part of the system design and IT management process for such systems. This work presents the experiences and results from the security analysis of the system architecture of the German Health Card, by making use of an approach to model-based security engineering that is based on the UML extension UMLsec. The focus lies on the security mechanisms and security policies of the smart-card-based architecture which were analyzed using the UMLsec method and tools. Main results of the paper include a report on the employment of the UMLsec method in an industrial health information systems context as well as indications of its benefits and limitations. In particular, two potential security weaknesses were detected and countermeasures discussed. The results indicate that it can be feasible to apply a model-based security analysis using UMLsec to an industrial health information system like the German Health Card architecture, and that doing so can have concrete benefits (such as discovering potential weaknesses, and an increased confidence that no further vulnerabilities of the kind that were considered are present).

Architectural slicing

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2013-01-01

Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...... a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java....

A Hybrid Power Management (HPM) Based Vehicle Architecture

Science.gov (United States)

Eichenberg, Dennis J.

2011-01-01

Society desires vehicles with reduced fuel consumption and reduced emissions. This presents a challenge and an opportunity for industry and the government. The NASA John H. Glenn Research Center (GRC) has developed a Hybrid Power Management (HPM) based vehicle architecture for space and terrestrial vehicles. GRC's Electrical and Electromagnetics Branch of the Avionics and Electrical Systems Division initiated the HPM Program for the GRC Technology Transfer and Partnership Office. HPM is the innovative integration of diverse, state-of-the-art power devices in an optimal configuration for space and terrestrial applications. The appropriate application and control of the various power devices significantly improves overall system performance and efficiency. The basic vehicle architecture consists of a primary power source, and possibly other power sources, providing all power to a common energy storage system, which is used to power the drive motors and vehicle accessory systems, as well as provide power as an emergency power system. Each component is independent, permitting it to be optimized for its intended purpose. This flexible vehicle architecture can be applied to all vehicles to considerably improve system efficiency, reliability, safety, security, and performance. This unique vehicle architecture has the potential to alleviate global energy concerns, improve the environment, stimulate the economy, and enable new missions.

Cultural based preconceptions in aesthetic experience of architecture

Directory of Open Access Journals (Sweden)

Stevanović Vladimir

2011-01-01

Full Text Available On a broader scale, the aim of this paper is to examine theoretically the effects a cultural context has on the aesthetic experience of images existing in perceived reality. Minimalism in architecture, as direct subject of research, is a field of particularities in which we observe functioning of this correlation. Through the experiment with the similarity phenomenon, the paper follows specific manifestations of general formal principles and variability of meaning of minimalism in architecture in limited areas of cultural backgrounds of Serbia and Japan. The goal of the comparative analysis of the examples presented is to indicate the conditions that may lead to a possibly different aesthetic experience in two different cultural contexts. Attribution of different meanings to similar formal visual language of architecture raises questions concerning the system of values, which produces these meanings in their cultural and historical perspectives. The establishment of values can also be affected by preconceptions resulting from association of perceived similarities. Are the preconceptions in aesthetic reception of architecture conditionally affected by pragmatic needs, symbolic archetypes, cultural metaphors based on tradition or ideologically constructed dogmas? Confronting philosophical postulates of the Western and Eastern traditions with the transculturality theory of Wolfgang Welsch, the answers may become more available.

The Use of Facade Mockups in in LCA Based Architectural Design

DEFF Research Database (Denmark)

Naboni, Emanuele

2017-01-01

Life Cycle Assessment is increasingly becoming important in façade architectural design. The presented research aims to describe an LCA architectural design approach based on the use of a Façade Mockup. The approach is applied and tested for the design Telecom Sustainable Campus’ façade, in Rome...

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

Novel power saving architecture for FBG based OCDMA code generation

Science.gov (United States)

Osadola, Tolulope B.; Idris, Siti K.; Glesk, Ivan

2013-10-01

A novel architecture for generating incoherent, 2-dimensional wavelength hopping-time spreading optical CDMA codes is presented. The architecture is designed to facilitate the reuse of optical source signal that is unused after an OCDMA code has been generated using fiber Bragg grating based encoders. Effective utilization of available optical power is therefore achieved by cascading several OCDMA encoders thereby enabling 3dB savings in optical power.

Extended architecture for home base stations with multimedia services

NARCIS (Netherlands)

Voicu, A.; Jarnikov, D.S.

2011-01-01

This paper describes the use of mobile access points (home node base stations, femtocells) for providing TV streaming to mobile devices inside the home. The research is focused on finding commonalities between architectures of the home node base station for different technologies. The result is a

Architecture of a micro grid energy manager; Arquitectura de un gestor energetico de microrredes

Energy Technology Data Exchange (ETDEWEB)

Jimeno-Huarte, J.; Anduaga-Muniozgueren, J.; Oyarzabal-Moreno, J.

2009-07-01

Micro grids are defined as a set of aggregated micro generators and loads operating like a unique system. Micro grids need energy management systems in order to coordinate the actions of the elements that compose them. This way, Micro grids provide useful services to connected users as well as to the electrical system. This paper presents the architecture of a Micro grid energy Manager applying multi agent based technologies and communication standards. an application of this architecture to the secondary regulation function has been performed using TECNALIA's Micro grid as validation platform. The implementation of the secondary regulation takes into account economical criteria while the technical restrictions of the controlled equipment are fulfilled. (Author) 14 refs.

FPGA Based Intelligent Co-operative Processor in Memory Architecture

DEFF Research Database (Denmark)

Ahmed, Zaki; Sotudeh, Reza; Hussain, Dil Muhammad Akbar

2011-01-01

benefits of PIM, a concept of Co-operative Intelligent Memory (CIM) was developed by the intelligent system group of University of Hertfordshire, based on the previously developed Co-operative Pseudo Intelligent Memory (CPIM). This paper provides an overview on previous works (CPIM, CIM) and realization......In a continuing effort to improve computer system performance, Processor-In-Memory (PIM) architecture has emerged as an alternative solution. PIM architecture incorporates computational units and control logic directly on the memory to provide immediate access to the data. To exploit the potential...

Analyzing dynamic fault trees derived from model-based system architectures

International Nuclear Information System (INIS)

Dehlinger, Josh; Dugan, Joanne Bechta

2008-01-01

Dependability-critical systems, such as digital instrumentation and control systems in nuclear power plants, necessitate engineering techniques and tools to provide assurances of their safety and reliability. Determining system reliability at the architectural design phase is important since it may guide design decisions and provide crucial information for trade-off analysis and estimating system cost. Despite this, reliability and system engineering remain separate disciplines and engineering processes by which the dependability analysis results may not represent the designed system. In this article we provide an overview and application of our approach to build architecture-based, dynamic system models for dependability-critical systems and then automatically generate Dynamic Fault Trees (DFT) for comprehensive, toolsupported reliability analysis. Specifically, we use the Architectural Analysis and Design Language (AADL) to model the structural, behavioral and failure aspects of the system in a composite architecture model. From the AADL model, we seek to derive the DFT(s) and use Galileo's automated reliability analyses to estimate system reliability. This approach alleviates the dependability engineering - systems engineering knowledge expertise gap, integrates the dependability and system engineering design and development processes and enables a more formal, automated and consistent DFT construction. We illustrate this work using an example based on a dynamic digital feed-water control system for a nuclear reactor

New concept of aging care architecture landscape design based on sustainable development

Science.gov (United States)

Xu, Ying

2017-05-01

As the aging problem becoming serious in China, Aging care is now one of the top issuer in front of all of us. Lots of private and public aging care architecture and facilities have been built. At present, we only pay attention to the architecture design and interior design scientific, ecological and sustainable design on aged care architecture landscape. Based on the social economy, population resources, mutual coordination and development of the environment, taking the elderly as the special group, this paper follows the principles of the sustainable development, conducts the comprehensive design planning of aged care landscape architecture and makes a deeper understanding and exploration through changing the form of architectural space, ecological landscape planting, new materials and technology, ecological energy utilization.

Space-Based Information Infrastructure Architecture for Broadband Services

Science.gov (United States)

Price, Kent M.; Inukai, Tom; Razdan, Rajendev; Lazeav, Yvonne M.

1996-01-01

This study addressed four tasks: (1) identify satellite-addressable information infrastructure markets; (2) perform network analysis for space-based information infrastructure; (3) develop conceptual architectures; and (4) economic assessment of architectures. The report concludes that satellites will have a major role in the national and global information infrastructure, requiring seamless integration between terrestrial and satellite networks. The proposed LEO, MEO, and GEO satellite systems have satellite characteristics that vary widely. They include delay, delay variations, poorer link quality and beam/satellite handover. The barriers against seamless interoperability between satellite and terrestrial networks are discussed. These barriers are the lack of compatible parameters, standards and protocols, which are presently being evaluated and reduced.

Software architecture 2

CERN Document Server

Oussalah, Mourad Chabanne

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

Software architecture 1

CERN Document Server

Oussalah , Mourad Chabane

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...... to this systematic thinking of the building technique we get a diverse and functional architecture. Creating a new and clearer story telling about new and smart system based thinking behind the architectural expression....

A Mobile Service Oriented Multiple Object Tracking Augmented Reality Architecture for Education and Learning Experiences

Science.gov (United States)

Rattanarungrot, Sasithorn; White, Martin; Newbury, Paul

2014-01-01

This paper describes the design of our service-oriented architecture to support mobile multiple object tracking augmented reality applications applied to education and learning scenarios. The architecture is composed of a mobile multiple object tracking augmented reality client, a web service framework, and dynamic content providers. Tracking of…

A Memory-based Robot Architecture based on Contextual Information

OpenAIRE

Pratama, Ferdian; Mastrogiovanni, Fulvio; Chong, Nak Young

2014-01-01

In this paper, we present a preliminary conceptual design for a robot long-term memory architecture based on the notion of context. Contextual information is used to organize the data flow between Working Memory (including Perceptual Memory) and Long-Term Memory components. We discuss the major influence of the notion of context within Episodic Memory on Semantic and Procedural Memory, respectively. We address how the occurrence of specific object-related events in time impacts on the semanti...

A CORBA BASED ARCHITECTURE FOR ACCESSING REUSABLE SOFTWARE COMPONENTS ON THE WEB.

Directory of Open Access Journals (Sweden)

R. Cenk ERDUR

2003-01-01

Full Text Available In a very near future, as a result of the continious growth of Internet and advances in networking technologies, Internet will become the common software repository for people and organizations who employ component based reuse approach in their software development life cycles. In order to use the reusable components such as source codes, analysis, designs, design patterns during new software development processes, environments that support the identification of the components over Internet are needed. Basic elements of such an environment are the coordinator programs which deliver user requests to appropriate component libraries, user interfaces for querying, and programs that wrap the component libraries. First, a CORBA based architecture is proposed for such an environment. Then, an alternative architecture that is based on the Java 2 platform technologies is given for the same environment. Finally, the two architectures are compared.

Web Based System Architecture for Long Pulse Remote Experimentation

Energy Technology Data Exchange (ETDEWEB)

De Las Heras, E.; Lastra, D. [INDRA Sistemas, S.A., Unidad de Sistemas de Control, Madrid (Spain); Vega, J.; Castro, R. [Association Euratom CIEMAT for Fusion, Madrid (Spain); Ruiz, M.; Barrera, E. [Universidad Politecnica de Madrid (Spain)

2009-07-01

INDRA is the first Information Technology company in Spain and it presents here, through a series of transparencies, its own approach for the remote experimentation architecture for long pulses (REAL). All the architecture is based on Java-2 platform standards and REAL is a totally open architecture. By itself REAL offers significant advantages: -) access authentication and authorization under multiple security implementations, -) local or remote network access: LAN, WAN, VPN..., -) on-line access to acquisition systems for monitoring and configuration, -) scalability, flexibility, robustness, platform independence,.... The BeansNet implementation of REAL gives additional good things such as: -) easy implementation, -) graphical tool for service composition and configuration, -) availability and hot-swap (no need of stopping or restarting services after update or remodeling, and -) INDRA support. The implementation of BeansNet at the TJ-2 stellarator at Ciemat is presented. This document is made of the presentation transparencies. (A.C.)

An eConsent-based System Architecture Supporting Cooperation in Integrated Healthcare Networks.

Science.gov (United States)

Bergmann, Joachim; Bott, Oliver J; Hoffmann, Ina; Pretschner, Dietrich P

2005-01-01

The economical need for efficient healthcare leads to cooperative shared care networks. A virtual electronic health record is required, which integrates patient related information but reflects the distributed infrastructure and restricts access only to those health professionals involved into the care process. Our work aims on specification and development of a system architecture fulfilling these requirements to be used in concrete regional pilot studies. Methodical analysis and specification have been performed in a healthcare network using the formal method and modelling tool MOSAIK-M. The complexity of the application field was reduced by focusing on the scenario of thyroid disease care, which still includes various interdisciplinary cooperation. Result is an architecture for a secure distributed electronic health record for integrated care networks, specified in terms of a MOSAIK-M-based system model. The architecture proposes business processes, application services, and a sophisticated security concept, providing a platform for distributed document-based, patient-centred, and secure cooperation. A corresponding system prototype has been developed for pilot studies, using advanced application server technologies. The architecture combines a consolidated patient-centred document management with a decentralized system structure without needs for replication management. An eConsent-based approach assures, that access to the distributed health record remains under control of the patient. The proposed architecture replaces message-based communication approaches, because it implements a virtual health record providing complete and current information. Acceptance of the new communication services depends on compatibility with the clinical routine. Unique and cross-institutional identification of a patient is also a challenge, but will loose significance with establishing common patient cards.

MOMCC: Market-Oriented Architecture for Mobile Cloud Computing Based on Service Oriented Architecture

OpenAIRE

Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah; Shiraz, Muhammad

2012-01-01

The vision of augmenting computing capabilities of mobile devices, especially smartphones with least cost is likely transforming to reality leveraging cloud computing. Cloud exploitation by mobile devices breeds a new research domain called Mobile Cloud Computing (MCC). However, issues like portability and interoperability should be addressed for mobile augmentation which is a non-trivial task using component-based approaches. Service Oriented Architecture (SOA) is a promising design philosop...

Carrier behavior in special multilayer device composed of different transition metal oxide-based intermediate connectors

International Nuclear Information System (INIS)

Deng, Yan-Hong; Chen, Xiang-Yu; Ou, Qing-Dong; Wang, Qian-Kun; Jiang, Xiao-Cheng; Zhang, Dan-Dan; Li, Yan-Qing

2014-01-01

The impact of illumination on the connection part of the tandem organic light-emitting diodes was studied by using a special organic multilayer sample consisted of two organic active layers coupled with different transition metal oxide (TMO)-based intermediate connectors (ICs). Through measuring the current density-voltage characteristic, interfacial electronic structures, and capacitance-voltage characteristic, we observe an unsymmetrical phenomenon in current density-voltage and capacitance-voltage curves of Mg:Alq 3 /MoO 3 and MoO 3 composed devices, which was induced by the charge spouting zone near the ICs region and the recombination state in the MoO 3 layer. Moreover, Mg:Alq 3 /MoO 3 composed device displays a photovoltaic effect and the V oc shifts to forward bias under illumination. Our results demonstrate that the TMO-based IC structure coupled with photovoltaic effect can be a good approach for the study of photodetector, light sensor, and so on.

Application of a Multimedia Service and Resource Management Architecture for Fault Diagnosis.

Science.gov (United States)

Castro, Alfonso; Sedano, Andrés A; García, Fco Javier; Villoslada, Eduardo; Villagrá, Víctor A

2017-12-28

Nowadays, the complexity of global video products has substantially increased. They are composed of several associated services whose functionalities need to adapt across heterogeneous networks with different technologies and administrative domains. Each of these domains has different operational procedures; therefore, the comprehensive management of multi-domain services presents serious challenges. This paper discusses an approach to service management linking fault diagnosis system and Business Processes for Telefónica's global video service. The main contribution of this paper is the proposal of an extended service management architecture based on Multi Agent Systems able to integrate the fault diagnosis with other different service management functionalities. This architecture includes a distributed set of agents able to coordinate their actions under the umbrella of a Shared Knowledge Plane, inferring and sharing their knowledge with semantic techniques and three types of automatic reasoning: heterogeneous, ontology-based and Bayesian reasoning. This proposal has been deployed and validated in a real scenario in the video service offered by Telefónica Latam.

ARCHITECTURE OF WEB BASED COMPUTER-AIDED MANUFACTURING SYSTEM

Directory of Open Access Journals (Sweden)

N. E. Filyukov

2014-09-01

Full Text Available The paper deals with design of a web-based system for Computer-Aided Manufacturing (CAM. Remote applications and databases located in the "private cloud" are proposed to be the basis of such system. The suggested approach contains: service - oriented architecture, using web applications and web services as modules, multi-agent technologies for implementation of information exchange functions between the components of the system and the usage of PDM - system for managing technology projects within the CAM. The proposed architecture involves CAM conversion into the corporate information system that will provide coordinated functioning of subsystems based on a common information space, as well as parallelize collective work on technology projects and be able to provide effective control of production planning. A system has been developed within this architecture which gives the possibility for a rather simple technological subsystems connect to the system and implementation of their interaction. The system makes it possible to produce CAM configuration for a particular company on the set of developed subsystems and databases specifying appropriate access rights for employees of the company. The proposed approach simplifies maintenance of software and information support for CAM subsystems due to their central location in the data center. The results can be used as a basis for CAM design and testing within the learning process for development and modernization of the system algorithms, and then can be tested in the extended enterprise.

Nova control system: goals, architecture, and system design

International Nuclear Information System (INIS)

Suski, G.J.; Duffy, J.M.; Gritton, D.G.; Holloway, F.W.; Krammen, J.R.; Ozarski, R.G.; Severyn, J.R.; Van Arsdall, P.J.

1982-01-01

The control system for the Nova laser must operate reliably in a harsh pulse power environment and satisfy requirements of technical functionality, flexibility, maintainability and operability. It is composed of four fundamental subsystems: Power Conditioning, Alignment, Laser Diagnostics, and Target Diagnostics, together with a fifth, unifying subsystem called Central Controls. The system architecture utilizes a collection of distributed microcomputers, minicomputers, and components interconnected through high speed fiber optic communications systems. The design objectives, development strategy and architecture of the overall control system and each of its four fundamental subsystems are discussed. Specific hardware and software developments in several areas are also covered

Object Detection Based on Fast/Faster RCNN Employing Fully Convolutional Architectures

Directory of Open Access Journals (Sweden)

Yun Ren

2018-01-01

Full Text Available Modern object detectors always include two major parts: a feature extractor and a feature classifier as same as traditional object detectors. The deeper and wider convolutional architectures are adopted as the feature extractor at present. However, many notable object detection systems such as Fast/Faster RCNN only consider simple fully connected layers as the feature classifier. In this paper, we declare that it is beneficial for the detection performance to elaboratively design deep convolutional networks (ConvNets of various depths for feature classification, especially using the fully convolutional architectures. In addition, this paper also demonstrates how to employ the fully convolutional architectures in the Fast/Faster RCNN. Experimental results show that a classifier based on convolutional layer is more effective for object detection than that based on fully connected layer and that the better detection performance can be achieved by employing deeper ConvNets as the feature classifier.

A NEW OS ARCHITECTURE FOR IOT

Directory of Open Access Journals (Sweden)

Jean Y. Astier

2018-03-01

Full Text Available Current computer operating systems architectures are not well suited for the coming world of connected objects, known as the Internet of Things (IoT for multiple reasons: poor communication performances in both point-to-point and broadcast cases, poor operational reliability and network security, excessive requirements both in terms of processor power and memory size leading to excessive electrical power consumption. We introduce a new computer operating system architecture well adapted to IoT, from the most modest to the most complex, and more generally able to significantly raise the input/output capacities of any communicating computer. This architecture rests on the principles of the Von Neumann hardware model, and is composed of two types of asymmetric distributed containers, which communicate by message passing. We describe the sub-systems of both of these types of containers, where each sub-system has its own scheduler, and a dedicated execution level.

Matrix-Vector Based Fast Fourier Transformations on SDR Architectures

Directory of Open Access Journals (Sweden)

Y. He

2008-05-01

Full Text Available Today Discrete Fourier Transforms (DFTs are applied in various radio standards based on OFDM (Orthogonal Frequency Division Multiplex. It is important to gain a fast computational speed for the DFT, which is usually achieved by using specialized Fast Fourier Transform (FFT engines. However, in face of the Software Defined Radio (SDR development, more general (parallel processor architectures are often desirable, which are not tailored to FFT computations. Therefore, alternative approaches are required to reduce the complexity of the DFT. Starting from a matrix-vector based description of the FFT idea, we will present different factorizations of the DFT matrix, which allow a reduction of the complexity that lies between the original DFT and the minimum FFT complexity. The computational complexities of these factorizations and their suitability for implementation on different processor architectures are investigated.

High-rise architecture in Ufa, Russia, based on crystallography canons

Science.gov (United States)

Narimanovich Sabitov, Ildar; Radikovna Kudasheva, Dilara; Yaroslavovich Vdovin, Denis

2018-03-01

The article considers fundamental steps of high-rise architecture forming stylistic tendencies, based on C. Willis and M. A. Korotich's studies. Crystallographic shaping as a direction is assigned on basis of classification by M. A. Korotich's. This direction is particularly examined and the main high-rise architecture forming aspects on basis of natural polycrystals forming principles are assigned. The article describes crystal forms transformation into an architectural composition, analyzes constructive systems within the framework of CTBUH (Council on Tall Buildings and Urban Habitat) classification, and picks out one of its types as the most optimal for using in buildings-crystals. The last stage of our research is the theoretical principles approbation into an experimental project of high-rise building in Ufa with the description of its contextual dislocation aspects.

A novel digital pulse processing architecture for nuclear instrumentation

Energy Technology Data Exchange (ETDEWEB)

Moline, Yoann; Thevenin, Mathieu; Corre, Gwenole [CEA, LIST - Laboratoire Capteurs et Architectures electroniques, F-91191 Gif-sur-Yvette, (France); Paindavoine, Michel [CNRS, Universite de Bourgogne - Laboratoire d' Etude de l' Apprentissage et du Developpement, 21000 DIJON, (France)

2015-07-01

The field of nuclear instrumentation covers a wide range of applications, including counting, spectrometry, pulse shape discrimination and multi-channel coincidence. These applications are the topic of many researches, new algorithms and implementations are constantly proposed thanks to advances in digital signal processing. However, these improvements are not yet implemented in instrumentation devices. This is especially true for neutron-gamma discrimination applications which traditionally use charge comparison method while literature proposes other algorithms based on frequency domain or wavelet theory which show better performances. Another example is pileups which are generally rejected while pileup correction algorithms also exist. These processes are traditionally performed offline due to two issues. The first is the Poissonian characteristic of the signal, composed of random arrival pulses which requires to current architectures to work in data flow. The second is the real-time requirement, which implies losing pulses when the pulse rate is too high. Despite the possibility of treating the pulses independently from each other, current architectures paralyze the acquisition of the signal during the processing of a pulse. This loss is called dead-time. These two issues have led current architectures to use dedicated solutions based on re-configurable components like Field Programmable Gate Arrays (FPGAs) to overcome the need of performance necessary to deal with dead-time. However, dedicated hardware algorithm implementations on re-configurable technologies are complex and time-consuming. For all these reasons, a programmable Digital pulse Processing (DPP) architecture in a high level language such as Cor C++ which can reduce dead-time would be worthwhile for nuclear instrumentation. This would reduce prototyping and test duration by reducing the level of hardware expertise to implement new algorithms. However, today's programmable solutions do not meet

A novel digital pulse processing architecture for nuclear instrumentation

International Nuclear Information System (INIS)

Moline, Yoann; Thevenin, Mathieu; Corre, Gwenole; Paindavoine, Michel

2015-01-01

The field of nuclear instrumentation covers a wide range of applications, including counting, spectrometry, pulse shape discrimination and multi-channel coincidence. These applications are the topic of many researches, new algorithms and implementations are constantly proposed thanks to advances in digital signal processing. However, these improvements are not yet implemented in instrumentation devices. This is especially true for neutron-gamma discrimination applications which traditionally use charge comparison method while literature proposes other algorithms based on frequency domain or wavelet theory which show better performances. Another example is pileups which are generally rejected while pileup correction algorithms also exist. These processes are traditionally performed offline due to two issues. The first is the Poissonian characteristic of the signal, composed of random arrival pulses which requires to current architectures to work in data flow. The second is the real-time requirement, which implies losing pulses when the pulse rate is too high. Despite the possibility of treating the pulses independently from each other, current architectures paralyze the acquisition of the signal during the processing of a pulse. This loss is called dead-time. These two issues have led current architectures to use dedicated solutions based on re-configurable components like Field Programmable Gate Arrays (FPGAs) to overcome the need of performance necessary to deal with dead-time. However, dedicated hardware algorithm implementations on re-configurable technologies are complex and time-consuming. For all these reasons, a programmable Digital pulse Processing (DPP) architecture in a high level language such as Cor C++ which can reduce dead-time would be worthwhile for nuclear instrumentation. This would reduce prototyping and test duration by reducing the level of hardware expertise to implement new algorithms. However, today's programmable solutions do not meet

The architecture of a virtual grid GIS server

Science.gov (United States)

Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

2008-10-01

The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

Implementation of Model View Controller (Mvc) Architecture on Building Web-based Information System

OpenAIRE

'Uyun, Shofwatul; Ma'arif, Muhammad Rifqi

2010-01-01

The purpose of this paper is to introduce the use of MVC architecture in web-based information systemsdevelopment. MVC (Model-View-Controller) architecture is a way to decompose the application into threeparts: model, view and controller. Originally applied to the graphical user interaction model of input,processing and output. Expected to use the MVC architecture, applications can be built maintenance of moremodular, rusable, and easy and migrate. We have developed a management system of sch...

IMPLEMENTATION OF MODEL VIEW CONTROLLER (MVC) ARCHITECTURE ON BUILDING WEB-BASED INFORMATION SYSTEM

OpenAIRE

'Uyun, Shofwatul; Ma'arif, Muhammad Rifqi

2010-01-01

The purpose of this paper is to introduce the use of MVC architecture in web-based information systemsdevelopment. MVC (Model-View-Controller) architecture is a way to decompose the application into threeparts: model, view and controller. Originally applied to the graphical user interaction model of input,processing and output. Expected to use the MVC architecture, applications can be built maintenance of moremodular, rusable, and easy and migrate. We have developed a management system of sch...

Low power adder based auditory filter architecture.

Science.gov (United States)

Rahiman, P F Khaleelur; Jayanthi, V S

2014-01-01

Cochlea devices are powered up with the help of batteries and they should possess long working life to avoid replacing of devices at regular interval of years. Hence the devices with low power consumptions are required. In cochlea devices there are numerous filters, each responsible for frequency variant signals, which helps in identifying speech signals of different audible range. In this paper, multiplierless lookup table (LUT) based auditory filter is implemented. Power aware adder architectures are utilized to add the output samples of the LUT, available at every clock cycle. The design is developed and modeled using Verilog HDL, simulated using Mentor Graphics Model-Sim Simulator, and synthesized using Synopsys Design Compiler tool. The design was mapped to TSMC 65 nm technological node. The standard ASIC design methodology has been adapted to carry out the power analysis. The proposed FIR filter architecture has reduced the leakage power by 15% and increased its performance by 2.76%.

Low Power Adder Based Auditory Filter Architecture

Directory of Open Access Journals (Sweden)

P. F. Khaleelur Rahiman

2014-01-01

Full Text Available Cochlea devices are powered up with the help of batteries and they should possess long working life to avoid replacing of devices at regular interval of years. Hence the devices with low power consumptions are required. In cochlea devices there are numerous filters, each responsible for frequency variant signals, which helps in identifying speech signals of different audible range. In this paper, multiplierless lookup table (LUT based auditory filter is implemented. Power aware adder architectures are utilized to add the output samples of the LUT, available at every clock cycle. The design is developed and modeled using Verilog HDL, simulated using Mentor Graphics Model-Sim Simulator, and synthesized using Synopsys Design Compiler tool. The design was mapped to TSMC 65 nm technological node. The standard ASIC design methodology has been adapted to carry out the power analysis. The proposed FIR filter architecture has reduced the leakage power by 15% and increased its performance by 2.76%.

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... proportions, to organize the process on site choosing either one room wall components or several rooms wall components – either horizontally or vertically. Combined with the seamless joint the playing with these possibilities the new industrialized architecture can deliver variations in choice of solutions...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... expression in the specific housing area. It is the aim of this article to expand the different design strategies which architects can use – to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose different...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Concept for Mobility and Interconnections Aspects in Converged NGN-Based IPTV Architecture

Directory of Open Access Journals (Sweden)

Eugen Mikoczy

2009-01-01

Full Text Available The progress and evolution trends in the area of ICT and ICT infrastructure based on convergence processes create new opportunities. Service providers and network operators can provide a wide spectrum of multimedia services and applications to end users. The IPTV services represent a specific group of multimedia services which are in the sphere of interest of the telecommunication technical community but also subscribers. Standardization bodies like ETSI TISPAN or ITU-T have defined standards for NGN-based IPTV architecture and services (IMS and non-IMS. The paper evaluates possibilities and potential architecture for concept of converged NGN IPTV. New vision of the converged NGN IPTV architecture is presented together with proposed enhancements compared to IMS-based IPTV where single converged platform can serve fixed, mobile, or wireless terminals. The concept for IPTV service roaming with mobility support and different interconnection scenarios are discussed with intention to show potential user benefits.

Low Power LDPC Code Decoder Architecture Based on Intermediate Message Compression Technique

Science.gov (United States)

Shimizu, Kazunori; Togawa, Nozomu; Ikenaga, Takeshi; Goto, Satoshi

Reducing the power dissipation for LDPC code decoder is a major challenging task to apply it to the practical digital communication systems. In this paper, we propose a low power LDPC code decoder architecture based on an intermediate message-compression technique which features as follows: (i) An intermediate message compression technique enables the decoder to reduce the required memory capacity and write power dissipation. (ii) A clock gated shift register based intermediate message memory architecture enables the decoder to decompress the compressed messages in a single clock cycle while reducing the read power dissipation. The combination of the above two techniques enables the decoder to reduce the power dissipation while keeping the decoding throughput. The simulation results show that the proposed architecture improves the power efficiency up to 52% and 18% compared to that of the decoder based on the overlapped schedule and the rapid convergence schedule without the proposed techniques respectively.

RF Sub-sampling Receiver Architecture based on Milieu Adapting Techniques

DEFF Research Database (Denmark)

Behjou, Nastaran; Larsen, Torben; Jensen, Ole Kiel

2012-01-01

A novel sub-sampling based architecture is proposed which has the ability of reducing the problem of image distortion and improving the signal to noise ratio significantly. The technique is based on sensing the environment and adapting the sampling rate of the receiver to the best possible...

A software-based technique enabling composable hierarchical preemptive scheduling for time-triggered applications

NARCIS (Netherlands)

Nejad, A.B.; Molnos, A.; Goossens, K.G.W.

2013-01-01

Many embedded real-time applications are typically time-triggered and preemptive schedulers are used to execute tasks of such applications. Orthogonally, composable partitioned embedded platforms use preemptive time-division multiplexing mechanism to isolate applications. Existing composable systems

Run-Time HW/SW Scheduling of Data Flow Applications on Reconfigurable Architectures

Directory of Open Access Journals (Sweden)

Ghaffari Fakhreddine

2009-01-01

Full Text Available This paper presents an efficient dynamic and run-time Hardware/Software scheduling approach. This scheduling heuristic consists in mapping online the different tasks of a highly dynamic application in such a way that the total execution time is minimized. We consider soft real-time data flow graph oriented applications for which the execution time is function of the input data nature. The target architecture is composed of two processors connected to a dynamically reconfigurable hardware accelerator. Our approach takes advantage of the reconfiguration property of the considered architecture to adapt the treatment to the system dynamics. We compare our heuristic with another similar approach. We present the results of our scheduling method on several image processing applications. Our experiments include simulation and synthesis results on a Virtex V-based platform. These results show a better performance against existing methods.

The Double-System Architecture for Trusted OS

Science.gov (United States)

Zhao, Yong; Li, Yu; Zhan, Jing

With the development of computer science and technology, current secure operating systems failed to respond to many new security challenges. Trusted operating system (TOS) is proposed to try to solve these problems. However, there are no mature, unified architectures for the TOS yet, since most of them cannot make clear of the relationship between security mechanism and the trusted mechanism. Therefore, this paper proposes a double-system architecture (DSA) for the TOS to solve the problem. The DSA is composed of the Trusted System (TS) and the Security System (SS). We constructed the TS by establishing a trusted environment and realized related SS. Furthermore, we proposed the Trusted Information Channel (TIC) to protect the information flow between TS and SS. In a word, the double system architecture we proposed can provide reliable protection for the OS through the SS with the supports provided by the TS.

Novel low-power ultrasound digital preprocessing architecture for wireless display.

Science.gov (United States)

Levesque, Philippe; Sawan, Mohamad

2010-03-01

A complete hardware-based ultrasound preprocessing unit (PPU) is presented as an alternative to available power-hungry devices. Intended to expand the ultrasonic applications, the proposed unit allows replacement of the cable of the ultrasonic probe by a wireless link to transfer data from the probe to a remote monitor. The digital back-end architecture of this PPU is fully pipelined, which permits sampling of ultrasonic signals at a frequency equal to the field-programmable gate array-based system clock, up to 100 MHz. Experimental results show that the proposed processing unit has an excellent performance, an equivalent 53.15 Dhrystone 2.1 MIPS/ MHz (DMIPS/MHz), compared with other software-based architectures that allow a maximum of 1.6 DMIPS/MHz. In addition, an adaptive subsampling method is proposed to operate the pixel compressor, which allows real-time image zooming and, by removing high-frequency noise, the lateral and axial resolutions are enhanced by 25% and 33%, respectively. Realtime images, acquired from a reference phantom, validated the feasibility of the proposed architecture. For a display rate of 15 frames per second, and a 5-MHz single-element piezoelectric transducer, the proposed digital PPU requires a dynamic power of only 242 mW, which represents around 20% of the best-available software-based system. Furthermore, composed by the ultrasound processor and the image interpolation unit, the digital processing core of the PPU presents good power-performance ratios of 26 DMIPS/mW and 43.9 DMIPS/mW at a 20-MHz and 100-MHz sample frequency, respectively.

Development of Universal Controller Architecture for SiC Based Power Electronic Building Blocks

Science.gov (United States)

2017-10-30

SiC Based Power Electronic Building Blocks Award Number Title of Research 30 October 2017 SUBMITTED BY D R. HERBERT L. G INN, Pl DEPT. OF...Naval Research , Philadelphia PA, Aug. 2017. • Ginn, H.L. Bakos J., "Development of Universal Controller Architecture for SiC Based Power Electronic...Controller Implementation for MMC Converters", Workshop on Control Architectures for Modular Power Conversion Systems, Office of Naval Research , Arlington VA

A semantically-aided architecture for a web-based monitoring system for carotid atherosclerosis.

Science.gov (United States)

Kolias, Vassileios D; Stamou, Giorgos; Golemati, Spyretta; Stoitsis, Giannis; Gkekas, Christos D; Liapis, Christos D; Nikita, Konstantina S

2015-08-01

Carotid atherosclerosis is a multifactorial disease and its clinical diagnosis depends on the evaluation of heterogeneous clinical data, such as imaging exams, biochemical tests and the patient's clinical history. The lack of interoperability between Health Information Systems (HIS) does not allow the physicians to acquire all the necessary data for the diagnostic process. In this paper, a semantically-aided architecture is proposed for a web-based monitoring system for carotid atherosclerosis that is able to gather and unify heterogeneous data with the use of an ontology and to create a common interface for data access enhancing the interoperability of HIS. The architecture is based on an application ontology of carotid atherosclerosis that is used to (a) integrate heterogeneous data sources on the basis of semantic representation and ontological reasoning and (b) access the critical information using SPARQL query rewriting and ontology-based data access services. The architecture was tested over a carotid atherosclerosis dataset consisting of the imaging exams and the clinical profile of 233 patients, using a set of complex queries, constructed by the physicians. The proposed architecture was evaluated with respect to the complexity of the queries that the physicians could make and the retrieval speed. The proposed architecture gave promising results in terms of interoperability, data integration of heterogeneous sources with an ontological way and expanded capabilities of query and retrieval in HIS.

FPGA-Based Channel Coding Architectures for 5G Wireless Using High-Level Synthesis

Directory of Open Access Journals (Sweden)

Swapnil Mhaske

2017-01-01

Full Text Available We propose strategies to achieve a high-throughput FPGA architecture for quasi-cyclic low-density parity-check codes based on circulant-1 identity matrix construction. By splitting the node processing operation in the min-sum approximation algorithm, we achieve pipelining in the layered decoding schedule without utilizing additional hardware resources. High-level synthesis compilation is used to design and develop the architecture on the FPGA hardware platform. To validate this architecture, an IEEE 802.11n compliant 608 Mb/s decoder is implemented on the Xilinx Kintex-7 FPGA using the LabVIEW FPGA Compiler in the LabVIEW Communication System Design Suite. Architecture scalability was leveraged to accomplish a 2.48 Gb/s decoder on a single Xilinx Kintex-7 FPGA. Further, we present rapidly prototyped experimentation of an IEEE 802.16 compliant hybrid automatic repeat request system based on the efficient decoder architecture developed. In spite of the mixed nature of data processing—digital signal processing and finite-state machines—LabVIEW FPGA Compiler significantly reduced time to explore the system parameter space and to optimize in terms of error performance and resource utilization. A 4x improvement in the system throughput, relative to a CPU-based implementation, was achieved to measure the error-rate performance of the system over large, realistic data sets using accelerated, in-hardware simulation.

A Design and Research on Protection of Architectural Heritage Based on Digital Technology

Directory of Open Access Journals (Sweden)

Hou Shuang Qing

2016-01-01

Full Text Available In the era of digital information, how to reasonably use new-tech and idea for the architectural heritage protection remains urgent. In terms of digital protection, 3D laser scanning technology can perfectly remedy the manual measurement limitation thus correctly obtaining the relevant data. Via analysis, we find that the architectural heritage bears in itself the parameterized characteristic. As Building Information Modeling (BIM can help realize the parametric design, we proposed a feasible Architectural Heritage Information Model with the BIM “family” connecting architectural heritage and BIM. Finally, the parameter-induced graphic driving is achieved based on the relation between the two.

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Agent-oriented Architecture for Task-based Information Search System

NARCIS (Netherlands)

Aroyo, Lora; de Bra, Paul M.E.; De Bra, P.; Hardman, L.

1999-01-01

The topic of the reported research discusses an agent-oriented architecture of an educational information search system AIMS - a task-based learner support system. It is implemented within the context of 'Courseware Engineering' on-line course at the Faculty of Educational Science and Technology,

Ragnarok: An Architecture Based Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

of the development process. The main contributions presented in the thesis have evolved from work with two of the hypotheses: These address the problems of management of evolution, and overview, comprehension and navigation respectively. The first main contribution is the Architectural Software Configuration...... Management Model: A software configuration management model where the abstractions and hierarchy of the logical aspect of software architecture forms the basis for version control and configuration management. The second main contribution is the Geographic Space Architecture Visualisation Model......: A visualisation model where entities in a software architecture are organised geographically in a two-dimensional plane, their visual appearance determined by processing a subset of the data in the entities, and interaction with the project's underlying data performed by direct manipulation of the landscape...

Hardware architecture design of image restoration based on time-frequency domain computation

Science.gov (United States)

Wen, Bo; Zhang, Jing; Jiao, Zipeng

2013-10-01

The image restoration algorithms based on time-frequency domain computation is high maturity and applied widely in engineering. To solve the high-speed implementation of these algorithms, the TFDC hardware architecture is proposed. Firstly, the main module is designed, by analyzing the common processing and numerical calculation. Then, to improve the commonality, the iteration control module is planed for iterative algorithms. In addition, to reduce the computational cost and memory requirements, the necessary optimizations are suggested for the time-consuming module, which include two-dimensional FFT/IFFT and the plural calculation. Eventually, the TFDC hardware architecture is adopted for hardware design of real-time image restoration system. The result proves that, the TFDC hardware architecture and its optimizations can be applied to image restoration algorithms based on TFDC, with good algorithm commonality, hardware realizability and high efficiency.

An intelligent service-based layered architecture for e learning and assessment

International Nuclear Information System (INIS)

Javaid, Q.; Arif, F.

2017-01-01

The rapid advancement in ICT (Information and Communication Technology) is causing a paradigm shift in eLearning domain. Traditional eLearning systems suffer from certain shortcomings like tight coupling of system components, lack of personalization, flexibility, and scalability and performance issues. This study aims at addressing these challenges through an MAS (Multi Agent System) based multi-layer architecture supported by web services. The foremost objective of this study is to enhance learning process efficiency by provision of flexibility features for learning and assessment processes. Proposed architecture consists of two sub-system namely eLearning and eAssesssment. This architecture comprises of five distinct layers for each sub-system, with active agents responsible for miscellaneous tasks including content handling, updating, resource optimization, load handling and provision of customized environments for learners and instructors. Our proposed architecture aims at establishment of a facilitation level to learners as well as instructors for convenient acquisition and dissemination of knowledge. Personalization features like customized environments, personalized content retrieval and recommendations, adaptive assessment and reduced response time, are believed to significantly enhance learning and tutoring experience. In essence characteristics like intelligence, personalization, interactivity, usability, laidback accessibility and security, signify aptness of proposed architecture for improving conventional learning and assessment processes. Finally we have evaluated our proposed architecture by means of analytical comparison and survey considering certain quality attributes. (author)

Architectural Theatricality

DEFF Research Database (Denmark)

Tvedebrink, Tenna Doktor Olsen

environments and a knowledge gap therefore exists in present hospital designs. Consequently, the purpose of this thesis has been to investigate if any research-based knowledge exist supporting the hypothesis that the interior architectural qualities of eating environments influence patient food intake, health...... and well-being, as well as outline a set of basic design principles ‘predicting’ the future interior architectural qualities of patient eating environments. Methodologically the thesis is based on an explorative study employing an abductive approach and hermeneutic-interpretative strategy utilizing tactics...... and food intake, as well as a series of references exist linking the interior architectural qualities of healthcare environments with the health and wellbeing of patients. On the basis of these findings, the thesis presents the concept of Architectural Theatricality as well as a set of design principles...

Architecture effects on multivalent interactions by polypeptide-based multivalent ligands

Science.gov (United States)

Liu, Shuang

Multivalent interactions are characterized by the simultaneous binding between multiple ligands and multiple binding sites, either in solutions or at interfaces. In biological systems, most multivalent interactions occur between protein receptors and carbohydrate ligands through hydrogen-bonding and hydrophobic interactions. Compared with weak affinity binding between one ligand and one binding site, i.e. monovalent interaction, multivalent interactioins provide greater avidity and specificity, and therefore play unique roles in a broad range of biological activities. Moreover, the studies of multivalent interactions are also essential for producing effective inhibitors and effectors of biological processes that could have important therapeutic applications. Synthetic multivalent ligands have been designed to mimic the biological functions of natural multivalent interactions, and various types of scaffolds have been used to display multiple ligands, including small molecules, linear polymers, dendrimers, nanoparticle surfaces, monolayer surfaces and liposomes. Studies have shown that multivalent interactions can be highly affected by various architectural parameters of these multivalent ligands, including ligand identities, valencies, spacing, ligand densities, nature of linker arms, scaffold length and scaffold conformation. Most of these multivalent ligands are chemically synthesized and have limitations of controlling over sequence and conformation, which is a barrier for mimicking ordered and controlled natural biological systems. Therefore, multivalent ligands with precisely controlled architecture are required for improved structure-function relationship studies. Protein engineering methods with subsequent chemical coupling of ligands provide significant advantages of controlling over backbone conformation and functional group placement, and therefore have been used to synthesize recombinant protein-based materials with desired properties similar to natural

Historical Patterns Based on Automatically Extracted Data: the Case of Classical Composers

DEFF Research Database (Denmark)

Borowiecki, Karol; O'Hagan, John

2012-01-01

application that automatically extracts and processes information was developed to generate data on the birth location, occupations and importance (using word count methods) of over 12,000 composers over six centuries. Quantitative measures of the relative importance of different types of music......The purpose of this paper is to demonstrate the potential for generating interesting aggregate data on certain aspect of the lives of thousands of composers, and indeed other creative groups, from large on-line dictionaries and to be able to do so relatively quickly. A purpose-built java...... and of the different music instruments over the centuries were also generated. Finally quantitative indicators of the importance of different cities over the different centuries in the lives of these composers are constructed. A range of interesting findings emerge in relation to all of these aspects of the lives...

A real-time photogrammetry system based on embedded architecture

Directory of Open Access Journals (Sweden)

S. Y. Zheng

2014-06-01

Full Text Available In order to meet the demand of real-time spatial data processing and improve the online processing capability of photogrammetric system, a kind of real-time photogrammetry method is proposed in this paper. According to the proposed method, system based on embedded architecture is then designed: using FPGA, ARM+DSP and other embedded computing technology to build specialized hardware operating environment, transplanting and optimizing the existing photogrammetric algorithm to the embedded system, and finally real-time photogrammetric data processing is realized. At last, aerial photogrammetric experiment shows that the method can achieve high-speed and stable on-line processing of photogrammetric data. And the experiment also verifies the feasibility of the proposed real-time photogrammetric system based on embedded architecture. It is the first time to realize real-time aerial photogrammetric system, which can improve the online processing efficiency of photogrammetry to a higher level and broaden the application field of photogrammetry.

Three-dimensional design methodologies for tree-based FPGA architecture

CERN Document Server

Pangracious, Vinod; Mehrez, Habib

2015-01-01

This book focuses on the development of 3D design and implementation methodologies for Tree-based FPGA architecture. It also stresses the needs for new and augmented 3D CAD tools to support designs such as, the design for 3D, to manufacture high performance 3D integrated circuits and reconfigurable FPGA-based systems. This book was written as a text that covers the foundations of 3D integrated system design and FPGA architecture design. It was written for the use in an elective or core course at the graduate level in field of Electrical Engineering, Computer Engineering and Doctoral Research programs. No previous background on 3D integration is required, nevertheless fundamental understanding of 2D CMOS VLSI design is required. It is assumed that reader has taken the core curriculum in Electrical Engineering or Computer Engineering, with courses like CMOS VLSI design, Digital System Design and Microelectronics Circuits being the most important. It is accessible for self-study by both senior students and profe...

Composing chaotic music from the letter m

Science.gov (United States)

Sotiropoulos, Anastasios D.

Chaotic music is composed from a proposed iterative map depicting the letter m, relating the pitch, duration and loudness of successive steps. Each of the two curves of the letter m is based on the classical logistic map. Thus, the generating map is xn+1 = r xn(1/2 - xn) for xn between 0 and 1/2 defining the first curve, and xn+1 = r (xn - 1/2)(1 - xn) for xn between 1/2 and 1 representing the second curve. The parameter r which determines the height(s) of the letter m varies from 2 to 16, the latter value ensuring fully developed chaotic solutions for the whole letter m; r = 8 yielding full chaotic solutions only for its first curve. The m-model yields fixed points, bifurcation points and chaotic regions for each separate curve, as well as values of the parameter r greater than 8 which produce inter-fixed points, inter-bifurcation points and inter-chaotic regions from the interplay of the two curves. Based on this, music is composed from mapping the m- recurrence model solutions onto actual notes. The resulting musical score strongly depends on the sequence of notes chosen by the composer to define the musical range corresponding to the range of the chaotic mathematical solutions x from 0 to 1. Here, two musical ranges are used; one is the middle chromatic scale and the other is the seven- octaves range. At the composer's will and, for aesthetics, within the same composition, notes can be the outcome of different values of r and/or shifted in any octave. Compositions with endings of non-repeating note patterns result from values of r in the m-model that do not produce bifurcations. Scores of chaotic music composed from the m-model and the classical logistic model are presented.

Information architecture: study and analysis of data Public Medical base (PubMed

Directory of Open Access Journals (Sweden)

Odete Máyra Mesquita Sales

2016-07-01

Full Text Available Objective. Based on principles proposed by Rosenfeld and Morville (2006, the present study examined the PubMed database interface, since a well-structured information architecture contributes to good usability in any digital environment. Method. The research development occurred through the use of literature techniques and empirical study on the analysis of information architecture based on organization, navigation, recommended labeling and search for Rosenfeld and Morville (2006 for the sake of usability base PubMed. For better understanding and description of these principles, we used the technique of content analysis. Results. The results showed that the database interface meets the criteria established by the elements of Information Architecture, such as organization based on hypertext structure, horizontal menu and local content divided into categories, identifying active links, global navigation , breadcrumb, textual labeling and iconographic and highlight the search engine. Conclusions. This research showed that the PubMed database interface is well structured, friendly and objective, with numerous possibilities of search and information retrieval. However, there is a need to adopt accessibility standards on this website, so that it reaches more efficiently its purpose of facilitating access to information organized and stored in the PubMed database.

Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator.

Science.gov (United States)

Wang, Zhiqiang; Li, Xiaolong; Xie, Yunde; Long, Zhiqiang

2018-05-24

In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator's frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL). In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

Maglev Train Signal Processing Architecture Based on Nonlinear Discrete Tracking Differentiator

Directory of Open Access Journals (Sweden)

Zhiqiang Wang

2018-05-01

Full Text Available In a maglev train levitation system, signal processing plays an important role for the reason that some sensor signals are prone to be corrupted by noise due to the harsh installation and operation environment of sensors and some signals cannot be acquired directly via sensors. Based on these concerns, an architecture based on a new type of nonlinear second-order discrete tracking differentiator is proposed. The function of this signal processing architecture includes filtering signal noise and acquiring needed signals for levitation purposes. The proposed tracking differentiator possesses the advantages of quick convergence, no fluttering, and simple calculation. Tracking differentiator’s frequency characteristics at different parameter values are studied in this paper. The performance of this new type of tracking differentiator is tested in a MATLAB simulation and this tracking-differentiator is implemented in Very-High-Speed Integrated Circuit Hardware Description Language (VHDL. In the end, experiments are conducted separately on a test board and a maglev train model. Simulation and experiment results show that the performance of this novel signal processing architecture can fulfill the real system requirement.

A dislocation-based crystal viscoplasticity model with application to micro-engineered plasma-facing materials

Energy Technology Data Exchange (ETDEWEB)

Rivera, David; Huang, Yue; Po, Giacomo; Ghoniem, Nasr M., E-mail: ghoniem@ucla.edu

2017-03-15

Materials developed with special surface architecture are shown here to be more resilient to the transient thermomechanical environments imposed by intermittent exposures to high heat flux thermal loading typical of long-pulse plasma transients. In an accompanying article, we present experimental results that show the relaxation of residual thermal stresses in micro-engineered W surfaces. A dislocation-based model is extended here within the framework of large deformation crystal plasticity. The model is applied to the deformation of single crystals, polycrystals, and micro-engineered surfaces composed of a uniform density of micro-pillars. The model is utilized to design tapered surface micro-pillar architecture, composed of a Re core and W coatings. Residual stresses generated by cyclic thermomechanical loading of these architectures show that the surface can be in a compressive stress state, following a short shakedown plasma exposure, thus mitigating surface fracture. - • Materials developed with special surface architecture are shown to be more resilient to the transient thermomechanical plasma transients. • A dislocation-based model is extended within the framework of large deformation crystal plasticity. • The model is applied to the deformation of single crystals, polycrystals, and micro-engineered surfaces. • The model is utilized to design tapered surface micro-pillar architecture, composed of a Re core and W coatings. • Residual stresses generated by cyclic thermomechanical loading show that the surface can be in a compressive stress state, thus mitigating surface fracture.

A dislocation-based crystal viscoplasticity model with application to micro-engineered plasma-facing materials

International Nuclear Information System (INIS)

Rivera, David; Huang, Yue; Po, Giacomo; Ghoniem, Nasr M.

2017-01-01

Materials developed with special surface architecture are shown here to be more resilient to the transient thermomechanical environments imposed by intermittent exposures to high heat flux thermal loading typical of long-pulse plasma transients. In an accompanying article, we present experimental results that show the relaxation of residual thermal stresses in micro-engineered W surfaces. A dislocation-based model is extended here within the framework of large deformation crystal plasticity. The model is applied to the deformation of single crystals, polycrystals, and micro-engineered surfaces composed of a uniform density of micro-pillars. The model is utilized to design tapered surface micro-pillar architecture, composed of a Re core and W coatings. Residual stresses generated by cyclic thermomechanical loading of these architectures show that the surface can be in a compressive stress state, following a short shakedown plasma exposure, thus mitigating surface fracture. - • Materials developed with special surface architecture are shown to be more resilient to the transient thermomechanical plasma transients. • A dislocation-based model is extended within the framework of large deformation crystal plasticity. • The model is applied to the deformation of single crystals, polycrystals, and micro-engineered surfaces. • The model is utilized to design tapered surface micro-pillar architecture, composed of a Re core and W coatings. • Residual stresses generated by cyclic thermomechanical loading show that the surface can be in a compressive stress state, thus mitigating surface fracture.

Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.; McFarland, Shane M.; Korona, F. Adam

2013-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This space suit system architecture and technologies required based on human exploration (EVA) destinations will be discussed, and how these systems should evolve to meet the future exploration EVA needs of the US human space flight program. A series of exercises and analyses provided a strong indication that the Constellation Program space suit architecture, with its maximum reuse of technology and functionality across a range of mission profiles and destinations, is postured to provide a viable solution for future space exploration missions. The destination environmental analysis demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew, given any human mission outside of low-Earth orbit. Additionally, some of the high-level trades presented here provide a review of the environmental and nonenvironmental design drivers that will become increasingly important as humans venture farther from Earth. The presentation of destination environmental data demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, largely independent of any particular design reference mission.

Operations Assessment of Launch Vehicle Architectures using Activity Based Cost Models

Science.gov (United States)

Ruiz-Torres, Alex J.; McCleskey, Carey

2000-01-01

The growing emphasis on affordability for space transportation systems requires the assessment of new space vehicles for all life cycle activities, from design and development, through manufacturing and operations. This paper addresses the operational assessment of launch vehicles, focusing on modeling the ground support requirements of a vehicle architecture, and estimating the resulting costs and flight rate. This paper proposes the use of Activity Based Costing (ABC) modeling for this assessment. The model uses expert knowledge to determine the activities, the activity times and the activity costs based on vehicle design characteristics. The approach provides several advantages to current approaches to vehicle architecture assessment including easier validation and allowing vehicle designers to understand the cost and cycle time drivers.

A task-based support architecture for developing point-of-care clinical decision support systems for the emergency department.

Science.gov (United States)

Wilk, S; Michalowski, W; O'Sullivan, D; Farion, K; Sayyad-Shirabad, J; Kuziemsky, C; Kukawka, B

2013-01-01

The purpose of this study was to create a task-based support architecture for developing clinical decision support systems (CDSSs) that assist physicians in making decisions at the point-of-care in the emergency department (ED). The backbone of the proposed architecture was established by a task-based emergency workflow model for a patient-physician encounter. The architecture was designed according to an agent-oriented paradigm. Specifically, we used the O-MaSE (Organization-based Multi-agent System Engineering) method that allows for iterative translation of functional requirements into architectural components (e.g., agents). The agent-oriented paradigm was extended with ontology-driven design to implement ontological models representing knowledge required by specific agents to operate. The task-based architecture allows for the creation of a CDSS that is aligned with the task-based emergency workflow model. It facilitates decoupling of executable components (agents) from embedded domain knowledge (ontological models), thus supporting their interoperability, sharing, and reuse. The generic architecture was implemented as a pilot system, MET3-AE--a CDSS to help with the management of pediatric asthma exacerbation in the ED. The system was evaluated in a hospital ED. The architecture allows for the creation of a CDSS that integrates support for all tasks from the task-based emergency workflow model, and interacts with hospital information systems. Proposed architecture also allows for reusing and sharing system components and knowledge across disease-specific CDSSs.

Biomedical laboratories: architecture and radioprotection principles

International Nuclear Information System (INIS)

Lapa, Renata

2005-01-01

In institutions where biological research are made and some technologies make use of radioisotope, the radiation protection is an issue of biosecurity for conceptual reasons. In the process of architectural design of Biomedical Laboratories, engineering and architecture reveal interfaces with other areas of knowledge and specific concepts. Exploring the role of architectural design in favor of personal and environmental protection in biological containment laboratories that handle non-sealed sources in research, the work discusses the triad that compose the principle of containment in health environments: best practices, protective equipment, physical facilities, with greater emphasis on the latter component. The shortcomings of the design process are reflected in construction and in use-operation and maintenance of these buildings, with direct consequences on the occupational health and safety, environmental and credibility of work processes. In this context, the importance of adoption of alternatives to improve the design process is confirmed, taking into account the early consideration of several variables involved and providing subsidies to the related laboratories . The research, conducted at FIOCRUZ - a Brazilian health institution, developed from the analysis of the participants in the architectural project, aiming at the formulation of design guidelines which could contribute to the rationalisation of this kind of building construction

Asynchronous Task-Based Polar Decomposition on Manycore Architectures

KAUST Repository

Sukkari, Dalal

2016-10-25

This paper introduces the first asynchronous, task-based implementation of the polar decomposition on manycore architectures. Based on a new formulation of the iterative QR dynamically-weighted Halley algorithm (QDWH) for the calculation of the polar decomposition, the proposed implementation replaces the original and hostile LU factorization for the condition number estimator by the more adequate QR factorization to enable software portability across various architectures. Relying on fine-grained computations, the novel task-based implementation is also capable of taking advantage of the identity structure of the matrix involved during the QDWH iterations, which decreases the overall algorithmic complexity. Furthermore, the artifactual synchronization points have been severely weakened compared to previous implementations, unveiling look-ahead opportunities for better hardware occupancy. The overall QDWH-based polar decomposition can then be represented as a directed acyclic graph (DAG), where nodes represent computational tasks and edges define the inter-task data dependencies. The StarPU dynamic runtime system is employed to traverse the DAG, to track the various data dependencies and to asynchronously schedule the computational tasks on the underlying hardware resources, resulting in an out-of-order task scheduling. Benchmarking experiments show significant improvements against existing state-of-the-art high performance implementations (i.e., Intel MKL and Elemental) for the polar decomposition on latest shared-memory vendors\\' systems (i.e., Intel Haswell/Broadwell/Knights Landing, NVIDIA K80/P100 GPUs and IBM Power8), while maintaining high numerical accuracy.

Composability in quantum cryptography

International Nuclear Information System (INIS)

Mueller-Quade, Joern; Renner, Renato

2009-01-01

If we combine two secure cryptographic systems, is the resulting system still secure? Answering this question is highly nontrivial and has recently sparked a considerable research effort, in particular, in the area of classical cryptography. A central insight was that the answer to the question is yes, but only within a well-specified composability framework and for carefully chosen security definitions. In this article, we review several aspects of composability in the context of quantum cryptography. The first part is devoted to key distribution. We discuss the security criteria that a quantum key distribution (QKD) protocol must fulfill to allow its safe use within a larger security application (e.g. for secure message transmission); and we demonstrate-by an explicit example-what can go wrong if conventional (non-composable) security definitions are used. Finally, to illustrate the practical use of composability, we show how to generate a continuous key stream by sequentially composing rounds of a QKD protocol. In the second part, we take a more general point of view, which is necessary for the study of cryptographic situations involving, for example, mutually distrustful parties. We explain the universal composability (UC) framework and state the composition theorem that guarantees that secure protocols can securely be composed to larger applications. We focus on the secure composition of quantum protocols into unconditionally secure classical protocols. However, the resulting security definition is so strict that some tasks become impossible without additional security assumptions. Quantum bit commitment is impossible in the UC framework even with mere computational security. Similar problems arise in the quantum bounded storage model and we observe a trade-off between the UC and the use of the weakest possible security assumptions.

INTELLIGENCE-BASED DESIGN: A SUSTAINABLE FOUNDATION FOR WORLDWIDE ARCHITECTURAL EDUCATION

Directory of Open Access Journals (Sweden)

Nikos A. Salingaros

2008-03-01

Full Text Available Architectural theory as currently taught in modern universities throughout the world no longer provides a plausible basis for the discipline and practice of architecture. Students studying within this model are left to their own inventions if they hope to gain an architectural degree. Forced to formulate a body of work constrained by the paradigm of contemporary design, students learn to copy fashionable images without understanding their geometry; or simply invent forms that look as if they possess a contemporary sense of architecture. By their very nature, such forms are irrelevant to human needs and sensibilities. Contrary to what students are led to believe, this practice does not provide a broader base for creativity, but instead effectively restricts choices to a very narrow design vocabulary. Most architectural institutions continue to propagate a curricular model that has sustained their particular ideals and ideologies for decades. While many innovative didactic materials and ideas for revising the architectural curriculum are available today, they are often overlooked or ignored. If implemented, these new ideas could drastically improve the educational model, allowing students the world over to participate in a learning experience specific to their immediate and local context. By re-situating the education of an architect in more practical and contextual terms, we emphasize components of building design that relate directly to human existence, human perception, and the human values and beliefs that have for millennia served to establish culture and identity. A new model of learning is developed here for students wanting to make real architecture, and for educators and practitioners that seek the same. The following proposal is predicated on the knowledge of human interaction with the physical world and the necessity of corporeal engagement with the built environment. Furthermore, our model re-institutes values in the practice and

Business Collaborations in Grids: The BREIN Architectural Principals and VO Model

Science.gov (United States)

Taylor, Steve; Surridge, Mike; Laria, Giuseppe; Ritrovato, Pierluigi; Schubert, Lutz

We describe the business-oriented architectural principles of the EC FP7 project “BREIN” for service-based computing. The architecture is founded on principles of how real businesses interact to mutual benefit, and we show how these can be applied to SOA and Grid computing. We present building blocks that can be composed in many ways to produce different value systems and supply chains for the provision of computing services over the Internet. We also introduce the complementary BREIN VO concept, which is centric to, and managed by, a main contractor who bears the responsibility for the whole VO. The BREIN VO has an execution lifecycle for the creation and operation of the VO, and we have related this to an application-focused workflow involving steps that provide real end-user value. We show how this can be applied to an engineering simulation application and how the workflow can be adapted should the need arise.

A Smart Mobile Lab-on-Chip-Based Medical Diagnostics System Architecture Designed For Evolvability

DEFF Research Database (Denmark)

Patou, François; Dimaki, Maria; Svendsen, Winnie Edith

2015-01-01

for this work. We introduce a smart-mobile and LoC-based system architecture designed for evolvability. By propagating LoC programmability, instrumentation, and control tools to the highlevel abstraction smart-mobile software layer, our architecture facilitates the realisation of new use...

A proposal for an SDN-based SIEPON architecture

Science.gov (United States)

Khalili, Hamzeh; Sallent, Sebastià; Piney, José Ramón; Rincón, David

2017-11-01

Passive Optical Network (PON) elements such as Optical Line Terminal (OLT) and Optical Network Units (ONUs) are currently managed by inflexible legacy network management systems. Software-Defined Networking (SDN) is a new networking paradigm that improves the operation and management of networks. In this paper, we propose a novel architecture, based on the SDN concept, for Ethernet Passive Optical Networks (EPON) that includes the Service Interoperability standard (SIEPON). In our proposal, the OLT is partially virtualized and some of its functionalities are allocated to the core network management system, while the OLT itself is replaced by an OpenFlow (OF) switch. A new MultiPoint MAC Control (MPMC) sublayer extension based on the OpenFlow protocol is presented. This would allow the SDN controller to manage and enhance the resource utilization, flow monitoring, bandwidth assignment, quality-of-service (QoS) guarantees, and energy management of the optical network access, to name a few possibilities. The OpenFlow switch is extended with synchronous ports to retain the time-critical nature of the EPON network. OpenFlow messages are also extended with new functionalities to implement the concept of EPON Service Paths (ESPs). Our simulation-based results demonstrate the effectiveness of the new architecture, while retaining a similar (or improved) performance in terms of delay and throughput when compared to legacy PONs.

Agent-Oriented Privacy-Based Information Brokering Architecture for Healthcare Environments

Directory of Open Access Journals (Sweden)

Abdulmutalib Masaud-Wahaishi

2009-01-01

Full Text Available Healthcare industry is facing a major reform at all levels—locally, regionally, nationally, and internationally. Healthcare services and systems become very complex and comprise of a vast number of components (software systems, doctors, patients, etc. that are characterized by shared, distributed and heterogeneous information sources with varieties of clinical and other settings. The challenge now faced with decision making, and management of care is to operate effectively in order to meet the information needs of healthcare personnel. Currently, researchers, developers, and systems engineers are working toward achieving better efficiency and quality of service in various sectors of healthcare, such as hospital management, patient care, and treatment. This paper presents a novel information brokering architecture that supports privacy-based information gathering in healthcare. Architecturally, the brokering is viewed as a layer of services where a brokering service is modeled as an agent with a specific architecture and interaction protocol that are appropriate to serve various requests. Within the context of brokering, we model privacy in terms of the entities ability to hide or reveal information related to its identities, requests, and/or capabilities. A prototype of the proposed architecture has been implemented to support information-gathering capabilities in healthcare environments using FIPA-complaint platform JADE.

Agent-oriented privacy-based information brokering architecture for healthcare environments.

Science.gov (United States)

Masaud-Wahaishi, Abdulmutalib; Ghenniwa, Hamada

2009-01-01

Healthcare industry is facing a major reform at all levels-locally, regionally, nationally, and internationally. Healthcare services and systems become very complex and comprise of a vast number of components (software systems, doctors, patients, etc.) that are characterized by shared, distributed and heterogeneous information sources with varieties of clinical and other settings. The challenge now faced with decision making, and management of care is to operate effectively in order to meet the information needs of healthcare personnel. Currently, researchers, developers, and systems engineers are working toward achieving better efficiency and quality of service in various sectors of healthcare, such as hospital management, patient care, and treatment. This paper presents a novel information brokering architecture that supports privacy-based information gathering in healthcare. Architecturally, the brokering is viewed as a layer of services where a brokering service is modeled as an agent with a specific architecture and interaction protocol that are appropriate to serve various requests. Within the context of brokering, we model privacy in terms of the entities ability to hide or reveal information related to its identities, requests, and/or capabilities. A prototype of the proposed architecture has been implemented to support information-gathering capabilities in healthcare environments using FIPA-complaint platform JADE.

Adaptive Optics Simulation for the World's Largest Telescope on Multicore Architectures with Multiple GPUs

KAUST Repository

Ltaief, Hatem

2016-06-02

We present a high performance comprehensive implementation of a multi-object adaptive optics (MOAO) simulation on multicore architectures with hardware accelerators in the context of computational astronomy. This implementation will be used as an operational testbed for simulating the de- sign of new instruments for the European Extremely Large Telescope project (E-ELT), the world\\'s biggest eye and one of Europe\\'s highest priorities in ground-based astronomy. The simulation corresponds to a multi-step multi-stage pro- cedure, which is fed, near real-time, by system and turbulence data coming from the telescope environment. Based on the PLASMA library powered by the OmpSs dynamic runtime system, our implementation relies on a task-based programming model to permit an asynchronous out-of-order execution. Using modern multicore architectures associated with the enormous computing power of GPUS, the resulting data-driven compute-intensive simulation of the entire MOAO application, composed of the tomographic reconstructor and the observing sequence, is capable of coping with the aforementioned real-time challenge and stands as a reference implementation for the computational astronomy community.

Different micromanipulation applications based on common modular control architecture

Science.gov (United States)

Sipola, Risto; Vallius, Tero; Pudas, Marko; Röning, Juha

2010-01-01

This paper validates a previously introduced scalable modular control architecture and shows how it can be used to implement research equipment. The validation is conducted by presenting different kinds of micromanipulation applications that use the architecture. Conditions of the micro-world are very different from those of the macro-world. Adhesive forces are significant compared to gravitational forces when micro-scale objects are manipulated. Manipulation is mainly conducted by automatic control relying on haptic feedback provided by force sensors. The validated architecture is a hierarchical layered hybrid architecture, including a reactive layer and a planner layer. The implementation of the architecture is modular, and the architecture has a lot in common with open architectures. Further, the architecture is extensible, scalable, portable and it enables reuse of modules. These are the qualities that we validate in this paper. To demonstrate the claimed features, we present different applications that require special control in micrometer, millimeter and centimeter scales. These applications include a device that measures cell adhesion, a device that examines properties of thin films, a device that measures adhesion of micro fibers and a device that examines properties of submerged gel produced by bacteria. Finally, we analyze how the architecture is used in these applications.

SCI based data acquisition architectures

International Nuclear Information System (INIS)

Bogaerts, J.A.C.; Divia, R.; Renardy, J.F.

1992-01-01

This paper discusses the Scalable Coherent Interface (SCI), an IEEE proposed standard (P1596) for interconnecting multiprocessor systems. The standard defines point to point connections between nodes, which can be processors, memories or I/O devices. Networks containing a maximum of 64K nodes with a bandwidth of one Gbyte/s between nodes, may be constructed. SCI is an attractive candidate to serve as a backbone for high speed, large volume data acquisition systems such as required by future experiments at the proposed Large Hadron Collider (LHC) at CERN. Work has started to simulate SCI based architectures for data acquisition systems. The simulation program proved to be a useful tool to study SCI systems. First results are reported on a model of a large LHC experiment containing over 1000 nodes

Network based control point for UPnP QoS architecture

DEFF Research Database (Denmark)

Brewka, Lukasz Jerzy; Wessing, Henrik; Rossello Busquet, Ana

2011-01-01

Enabling coexistence of non-UPnP Devices in an UPnP QoS Architecture is an important issue that might have a major impact on the deployment and usability of UPnP in future home networks. The work presented here shows potential issues of placing non-UPnP Device in the network managed by UPnP QoS. We...... address this issue by extensions to the UPnP QoS Architecture that can prevent non-UPnP Devices from degrading the overall QoS level. The obtained results show that deploying Network Based Control Point service with efficient traffic classifier, improves significantly the end-to-end packet delay...

A Multi-homed VPN Architecture Based on Extended SOCKS+TLS Protocols

Institute of Scientific and Technical Information of China (English)

无

2005-01-01

A multi-homed VPN architecture based on extended SOCKSv5 and TLS was proposed. The architecture employs a dynamic connection mechanism for multiple proxies in the end system,in which the security-demanded transmission connections can switch smoothly among the multiple proxies by maintaining a coherent connection context. The mechanism is transparent to application programs and can support the building of VPN. With the cooperation of some other security components,the mechanism guarantees the resource availability and reliability of the end system against some attacks to the specific ports or hosts.

Software architecture as a set of architectural design decisions

NARCIS (Netherlands)

Jansen, Anton; Bosch, Jan; Nord, R; Medvidovic, N; Krikhaar, R; Khrhaar, R; Stafford, J; Bosch, J

2006-01-01

Software architectures have high costs for change, are complex, and erode during evolution. We believe these problems are partially due to knowledge vaporization. Currently, almost all the knowledge and information about the design decisions the architecture is based on are implicitly embedded in

Nanotube devices based crossbar architecture: toward neuromorphic computing

International Nuclear Information System (INIS)

Zhao, W S; Gamrat, C; Agnus, G; Derycke, V; Filoramo, A; Bourgoin, J-P

2010-01-01

Nanoscale devices such as carbon nanotube and nanowires based transistors, memristors and molecular devices are expected to play an important role in the development of new computing architectures. While their size represents a decisive advantage in terms of integration density, it also raises the critical question of how to efficiently address large numbers of densely integrated nanodevices without the need for complex multi-layer interconnection topologies similar to those used in CMOS technology. Two-terminal programmable devices in crossbar geometry seem particularly attractive, but suffer from severe addressing difficulties due to cross-talk, which implies complex programming procedures. Three-terminal devices can be easily addressed individually, but with limited gain in terms of interconnect integration. We show how optically gated carbon nanotube devices enable efficient individual addressing when arranged in a crossbar geometry with shared gate electrodes. This topology is particularly well suited for parallel programming or learning in the context of neuromorphic computing architectures.

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Towards multi-platform software architecture for Collaborative Teleoperation

Science.gov (United States)

Domingues, Christophe; Otmane, Samir; Davesne, Frederic; Mallem, Malik

2009-03-01

Augmented Reality (AR) can provide to a Human Operator (HO) a real help in achieving complex tasks, such as remote control of robots and cooperative teleassistance. Using appropriate augmentations, the HO can interact faster, safer and easier with the remote real world. In this paper, we present an extension of an existing distributed software and network architecture for collaborative teleoperation based on networked human-scaled mixed reality and mobile platform. The first teleoperation system was composed by a VR application and a Web application. However the 2 systems cannot be used together and it is impossible to control a distant robot simultaneously. Our goal is to update the teleoperation system to permit a heterogeneous collaborative teleoperation between the 2 platforms. An important feature of this interface is based on the use of different Virtual Reality platforms and different Mobile platforms to control one or many robots.

Towards multi-platform software architecture for Collaborative Teleoperation

International Nuclear Information System (INIS)

Domingues, Christophe; Otmane, Samir; Davesne, Frederic; Mallem, Malik

2009-01-01

Augmented Reality (AR) can provide to a Human Operator (HO) a real help in achieving complex tasks, such as remote control of robots and cooperative teleassistance. Using appropriate augmentations, the HO can interact faster, safer and easier with the remote real world. In this paper, we present an extension of an existing distributed software and network architecture for collaborative teleoperation based on networked human-scaled mixed reality and mobile platform. The first teleoperation system was composed by a VR application and a Web application. However the 2 systems cannot be used together and it is impossible to control a distant robot simultaneously. Our goal is to update the teleoperation system to permit a heterogeneous collaborative teleoperation between the 2 platforms. An important feature of this interface is based on the use of different Virtual Reality platforms and different Mobile platforms to control one or many robots.

The Hi-Ring DCN Architecture

DEFF Research Database (Denmark)

Galili, Michael; Kamchevska, Valerija; Ding, Yunhong

2016-01-01

We will review recent work on the proposed hierarchical ring-based architecture (HiRing) proposed for data center networks. We will discuss the architecture and initial demonstrations of optical switching performance and time-domain synchronization......We will review recent work on the proposed hierarchical ring-based architecture (HiRing) proposed for data center networks. We will discuss the architecture and initial demonstrations of optical switching performance and time-domain synchronization...

Composing the Curriculum: Teacher Identity

Science.gov (United States)

Lewis, Rebecca

2012-01-01

What is composing and how is it valued? What does a good education in composing look like; what constraints hinder it and is it possible to overcome such constraints? Can composing be a personal, creative and valuable activity for the school student? What role does the teacher play in all of this? These are questions that I discuss in this…

A model of tumor architecture and spatial interactions with tumor microenvironment in breast carcinoma

Science.gov (United States)

Ben Cheikh, Bassem; Bor-Angelier, Catherine; Racoceanu, Daniel

2017-03-01

Breast carcinomas are cancers that arise from the epithelial cells of the breast, which are the cells that line the lobules and the lactiferous ducts. Breast carcinoma is the most common type of breast cancer and can be divided into different subtypes based on architectural features and growth patterns, recognized during a histopathological examination. Tumor microenvironment (TME) is the cellular environment in which tumor cells develop. Being composed of various cell types having different biological roles, TME is recognized as playing an important role in the progression of the disease. The architectural heterogeneity in breast carcinomas and the spatial interactions with TME are, to date, not well understood. Developing a spatial model of tumor architecture and spatial interactions with TME can advance our understanding of tumor heterogeneity. Furthermore, generating histological synthetic datasets can contribute to validating, and comparing analytical methods that are used in digital pathology. In this work, we propose a modeling method that applies to different breast carcinoma subtypes and TME spatial distributions based on mathematical morphology. The model is based on a few morphological parameters that give access to a large spectrum of breast tumor architectures and are able to differentiate in-situ ductal carcinomas (DCIS) and histological subtypes of invasive carcinomas such as ductal (IDC) and lobular carcinoma (ILC). In addition, a part of the parameters of the model controls the spatial distribution of TME relative to the tumor. The validation of the model has been performed by comparing morphological features between real and simulated images.

Design optimization of TTEthernet-based distributed real-time systems

DEFF Research Database (Denmark)

Tamas-Selicean, Domitian; Pop, Paul; Steiner, Wilfried

2015-01-01

Many safety-critical real-time applications are implemented using distributed architectures, composed of heterogeneous processing elements interconnected in a network. Our focus in this paper is on the TTEthernet protocol, a deterministic, synchronized and congestion-free network protocol based o...

Ethernet-based mobility architecture for 5G

DEFF Research Database (Denmark)

Cattoni, Andrea Fabio; Mogensen, Preben; Vesterinen, Seppo

2014-01-01

of mobile devices and sensors. In this paper we propose a paradigm shift for the evolved Packet Core for the future 5G system. By leveraging on the economy of scale of software–based ICT technologies, namely Software Defined Networking and cloud computing, we propose a hierarchically cloudified mobile...... network. In particular, in this paper we focus on the mobility aspects within such new architecture, proposing low latency Layer 2 solutions for the Access Network, while exploiting aggregating Layer 3 mobility functionalities in the regional and national clouds....

SOFTWARE ARCHITECTURE DESIGN OF GIS WEB SERVICE AGGREGATION BASED ON SERVICE GROUP

Directory of Open Access Journals (Sweden)

J.-C. Liu

2012-08-01

Full Text Available Based on the analysis of research status of domestic and international GIS web service aggregation and development tendency of public platform of GIS web service, the paper designed software architecture of GIS web service aggregation based on GIS web service group. Firstly, using heterogeneous GIS services model, the software architecture converted a variety of heterogeneous services to a unified interface of GIS services, and divided different types of GIS services into different service groups referring to description of GIS services. Secondly, a service aggregation process model was designed. This model completed the task of specific service aggregation instance, by automatically selecting member GIS Web services in the same service group. Dynamic capabilities and automatic adaptation of GIS Web services aggregation process were achieved. Thirdly, this paper designed a service evaluation model of GIS web service aggregation based on service group from three aspects, i.e. GIS Web Service itself, networking conditions and service consumer. This model implemented effective quality evaluation and performance monitoring of GIS web service aggregation. It could be used to guide the execution, monitor and service selection of aggregation process. Therefore, robustness of aggregated GIS web service was improved. Finally, the software architecture has been widely used in public platform of GIS web service and a number of geo-spatial framework constructions for digital city in Sichuan Province, and aggregated various GIS web services such as World Map(National Public Platform of Geo-spatial Service, ArcGIS, SuperMap, MapGIS, NewMap etc. Applications of items showed that this software architecture was practicability.

Readout Architecture for Hybrid Pixel Readout Chips

CERN Document Server

AUTHOR|(SzGeCERN)694170; Westerlund, Tomi; Wyllie, Ken

The original contribution of this thesis to knowledge are novel digital readout architectures for hybrid pixel readout chips. The thesis presents asynchronous bus-based architecture, a data-node based column architecture and a network-based pixel matrix architecture for data transportation. It is shown that the data-node architecture achieves readout efficiency 99 % with half the output rate as a bus-based system. The network-based solution avoids ``broken'' columns due to some manufacturing errors, and it distributes internal data traffic more evenly across the pixel matrix than column-based architectures. An improvement of $>$ 10 % to the efficiency is achieved with uniform and non-uniform hit occupancies. Architectural design has been done using transaction level modeling ($TLM$) and sequential high-level design techniques for reducing the design and simulation time. It has been possible to simulate tens of column and full chip architectures using the high-level techniques. A decrease of $>$ 10 in run-time...

Augmented reality & gesture-based architecture in games for the elderly.

Science.gov (United States)

McCallum, Simon; Boletsis, Costas

2013-01-01

Serious games for health and, more specifically, for elderly people have developed rapidly in recent years. The recent popularization of novel interaction methods of consoles, such as the Nintendo Wii and Microsoft Kinect, has provided an opportunity for the elderly to engage in computer and video games. These interaction methods, however, still present various challenges for elderly users. To address these challenges, we propose an architecture consisted of Augmented Reality (as an output mechanism) combined with gestured-based devices (as an input method). The intention of this work is to provide a theoretical justification for using these technologies and to integrate them into an architecture, acting as a basis for potentially creating suitable interaction techniques for the elderly players.

Parallel PDE-Based Simulations Using the Common Component Architecture

International Nuclear Information System (INIS)

McInnes, Lois C.; Allan, Benjamin A.; Armstrong, Robert; Benson, Steven J.; Bernholdt, David E.; Dahlgren, Tamara L.; Diachin, Lori; Krishnan, Manoj Kumar; Kohl, James A.; Larson, J. Walter; Lefantzi, Sophia; Nieplocha, Jarek; Norris, Boyana; Parker, Steven G.; Ray, Jaideep; Zhou, Shujia

2006-01-01

The complexity of parallel PDE-based simulations continues to increase as multimodel, multiphysics, and multi-institutional projects become widespread. A goal of component based software engineering in such large-scale simulations is to help manage this complexity by enabling better interoperability among various codes that have been independently developed by different groups. The Common Component Architecture (CCA) Forum is defining a component architecture specification to address the challenges of high-performance scientific computing. In addition, several execution frameworks, supporting infrastructure, and general purpose components are being developed. Furthermore, this group is collaborating with others in the high-performance computing community to design suites of domain-specific component interface specifications and underlying implementations. This chapter discusses recent work on leveraging these CCA efforts in parallel PDE-based simulations involving accelerator design, climate modeling, combustion, and accidental fires and explosions. We explain how component technology helps to address the different challenges posed by each of these applications, and we highlight how component interfaces built on existing parallel toolkits facilitate the reuse of software for parallel mesh manipulation, discretization, linear algebra, integration, optimization, and parallel data redistribution. We also present performance data to demonstrate the suitability of this approach, and we discuss strategies for applying component technologies to both new and existing applications

Information Integration Architecture Development

OpenAIRE

Faulkner, Stéphane; Kolp, Manuel; Nguyen, Duy Thai; Coyette, Adrien; Do, Thanh Tung; 16th International Conference on Software Engineering and Knowledge Engineering

2004-01-01

Multi-Agent Systems (MAS) architectures are gaining popularity for building open, distributed, and evolving software required by systems such as information integration applications. Unfortunately, despite considerable work in software architecture during the last decade, few research efforts have aimed at truly defining patterns and languages for designing such multiagent architectures. We propose a modern approach based on organizational structures and architectural description lan...

A Low Cost VLSI Architecture for Spike Sorting Based on Feature Extraction with Peak Search.

Science.gov (United States)

Chang, Yuan-Jyun; Hwang, Wen-Jyi; Chen, Chih-Chang

2016-12-07

The goal of this paper is to present a novel VLSI architecture for spike sorting with high classification accuracy, low area costs and low power consumption. A novel feature extraction algorithm with low computational complexities is proposed for the design of the architecture. In the feature extraction algorithm, a spike is separated into two portions based on its peak value. The area of each portion is then used as a feature. The algorithm is simple to implement and less susceptible to noise interference. Based on the algorithm, a novel architecture capable of identifying peak values and computing spike areas concurrently is proposed. To further accelerate the computation, a spike can be divided into a number of segments for the local feature computation. The local features are subsequently merged with the global ones by a simple hardware circuit. The architecture can also be easily operated in conjunction with the circuits for commonly-used spike detection algorithms, such as the Non-linear Energy Operator (NEO). The architecture has been implemented by an Application-Specific Integrated Circuit (ASIC) with 90-nm technology. Comparisons to the existing works show that the proposed architecture is well suited for real-time multi-channel spike detection and feature extraction requiring low hardware area costs, low power consumption and high classification accuracy.

A Cooperative Coevolution Approach to Automate Pattern-based Software Architectural Synthesis

NARCIS (Netherlands)

Xu, Y.R.; Liang, P.

2014-01-01

To reuse successful experience in software architecture design, architects use architectural patterns as reusable architectural knowledge for architectural synthesis. However, it has been observed that the resulting architecture does not always conform to the initial architectural patterns employed.

Composability-Centered Convolutional Neural Network Pruning

Energy Technology Data Exchange (ETDEWEB)

Shen, Xipeng [North Carolina State University; Guan, Hui [North Carolina State University; Lim, Seung-Hwan [ORNL; Patton, Robert M. [ORNL

2018-02-01

This work studies the composability of the building blocks ofstructural CNN models (e.g., GoogleLeNet and Residual Networks) in thecontext of network pruning. We empirically validate that a networkcomposed of pre-trained building blocks (e.g. residual blocks andInception modules) not only gives a better initial setting fortraining, but also allows the training process to converge at asignificantly higher accuracy in much less time. Based on thatinsight, we propose a {\\em composability-centered} design for CNNnetwork pruning. Experiments show that this new scheme shortens theconfiguration process in CNN network pruning by up to 186.8X forResNet-50 and up to 30.2X for Inception-V3, and meanwhile, the modelsit finds that meet the accuracy requirement are significantly morecompact than those found by default schemes.

Evaluation of CNN architectures for gait recognition based on optical flow maps

OpenAIRE

Castro, F. M.; Marín-Jiménez, M.J.; Guil, N.; López-Tapia, S.; Pérez de la Blanca, N.

2017-01-01

This work targets people identification in video based on the way they walk (\\ie gait) by using deep learning architectures. We explore the use of convolutional neural networks (CNN) for learning high-level descriptors from low-level motion features (\\ie optical flow components). The low number of training samples for each subject and the use of a test set containing subjects different from the training ones makes the search of a good CNN architecture a challenging task. Universidad de Mál...

High-performance Sonitopia (Sonic Utopia): Hyper intelligent Material-based Architectural Systems for Acoustic Energy Harvesting

Science.gov (United States)

Heidari, F.; Mahdavinejad, M.

2017-08-01

The rate of energy consumption in all over the world, based on reliable statistics of international institutions such as the International Energy Agency (IEA) shows significant increase in energy demand in recent years. Periodical recorded data shows a continuous increasing trend in energy consumption especially in developed countries as well as recently emerged developing economies such as China and India. While air pollution and water contamination as results of high consumption of fossil energy resources might be consider as menace to civic ideals such as livability, conviviality and people-oriented cities. In other hand, automobile dependency, cars oriented design and other noisy activities in urban spaces consider as threats to urban life. Thus contemporary urban design and planning concentrates on rethinking about ecology of sound, reorganizing the soundscape of neighborhoods, redesigning the sonic order of urban space. It seems that contemporary architecture and planning trends through soundscape mapping look for sonitopia (Sonic + Utopia) This paper is to propose some interactive hyper intelligent material-based architectural systems for acoustic energy harvesting. The proposed architectural design system may be result in high-performance architecture and planning strategies for future cities. The ultimate aim of research is to develop a comprehensive system for acoustic energy harvesting which cover the aim of noise reduction as well as being in harmony with architectural design. The research methodology is based on a literature review as well as experimental and quasi-experimental strategies according the paradigm of designedly ways of doing and knowing. While architectural design has solution-focused essence in problem-solving process, the proposed systems had better be hyper intelligent rather than predefined procedures. Therefore, the steps of the inference mechanism of the research include: 1- understanding sonic energy and noise potentials as energy

An Enterprise Architecture Perspective to Electronic Health Record Based Care Governance.

Science.gov (United States)

Motoc, Bogdan

2017-01-01

This paper proposes an Enterprise Architecture viewpoint of Electronic Health Record (EHR) based care governance. The improvements expected are derived from the collaboration framework and the clinical health model proposed as foundation for the concept of EHR.

Memristor-based nanoelectronic computing circuits and architectures

CERN Document Server

Vourkas, Ioannis

2016-01-01

This book considers the design and development of nanoelectronic computing circuits, systems and architectures focusing particularly on memristors, which represent one of today’s latest technology breakthroughs in nanoelectronics. The book studies, explores, and addresses the related challenges and proposes solutions for the smooth transition from conventional circuit technologies to emerging computing memristive nanotechnologies. Its content spans from fundamental device modeling to emerging storage system architectures and novel circuit design methodologies, targeting advanced non-conventional analog/digital massively parallel computational structures. Several new results on memristor modeling, memristive interconnections, logic circuit design, memory circuit architectures, computer arithmetic systems, simulation software tools, and applications of memristors in computing are presented. High-density memristive data storage combined with memristive circuit-design paradigms and computational tools applied t...

Automation Hooks Architecture for Flexible Test Orchestration - Concept Development and Validation

Science.gov (United States)

Lansdowne, C. A.; Maclean, John R.; Winton, Chris; McCartney, Pat

2011-01-01

The Automation Hooks Architecture Trade Study for Flexible Test Orchestration sought a standardized data-driven alternative to conventional automated test programming interfaces. The study recommended composing the interface using multicast DNS (mDNS/SD) service discovery, Representational State Transfer (Restful) Web Services, and Automatic Test Markup Language (ATML). We describe additional efforts to rapidly mature the Automation Hooks Architecture candidate interface definition by validating it in a broad spectrum of applications. These activities have allowed us to further refine our concepts and provide observations directed toward objectives of economy, scalability, versatility, performance, severability, maintainability, scriptability and others.

A unified architecture for biomedical search engines based on semantic web technologies.

Science.gov (United States)

Jalali, Vahid; Matash Borujerdi, Mohammad Reza

2011-04-01

There is a huge growth in the volume of published biomedical research in recent years. Many medical search engines are designed and developed to address the over growing information needs of biomedical experts and curators. Significant progress has been made in utilizing the knowledge embedded in medical ontologies and controlled vocabularies to assist these engines. However, the lack of common architecture for utilized ontologies and overall retrieval process, hampers evaluating different search engines and interoperability between them under unified conditions. In this paper, a unified architecture for medical search engines is introduced. Proposed model contains standard schemas declared in semantic web languages for ontologies and documents used by search engines. Unified models for annotation and retrieval processes are other parts of introduced architecture. A sample search engine is also designed and implemented based on the proposed architecture in this paper. The search engine is evaluated using two test collections and results are reported in terms of precision vs. recall and mean average precision for different approaches used by this search engine.

Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model

International Nuclear Information System (INIS)

Tsarouchas, D.; Markaki, A.E.

2011-01-01

This paper proposes a method for extracting reliable architectural characteristics from complex porous structures using micro-computed tomography (μCT) images. The work focuses on a highly porous material composed of a network of fibres bonded together. The segmentation process, allowing separation of the fibres from the remainder of the image, is the most critical step in constructing an accurate representation of the network architecture. Segmentation methods, based on local and global thresholding, were investigated and evaluated by a quantitative comparison of the architectural parameters they yielded, such as the fibre orientation and segment length (sections between joints) distributions and the number of inter-fibre crossings. To improve segmentation accuracy, a deconvolution algorithm was proposed to restore the original images. The efficacy of the proposed method was verified by comparing μCT network architectural characteristics with those obtained using high resolution CT scans (nanoCT). The results indicate that this approach resolves the architecture of these complex networks and produces results approaching the quality of nanoCT scans. The extracted architectural parameters were used in conjunction with an affine analytical model to predict the axial and transverse stiffnesses of the fibre network. Transverse stiffness predictions were compared with experimentally measured values obtained by vibration testing.

Research of Ancient Architectures in Jin-Fen Area Based on GIS&BIM Technology

Science.gov (United States)

Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

2017-05-01

The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation & restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching & collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS&BIM technology, could be constructed to support the

Asynchronous Task-Based Polar Decomposition on Single Node Manycore Architectures

KAUST Repository

Sukkari, Dalal E.; Ltaief, Hatem; Faverge, Mathieu; Keyes, David E.

2017-01-01

This paper introduces the first asynchronous, task-based formulation of the polar decomposition and its corresponding implementation on manycore architectures. Based on a formulation of the iterative QR dynamically-weighted Halley algorithm (QDWH) for the calculation of the polar decomposition, the proposed implementation replaces the original LU factorization for the condition number estimator by the more adequate QR factorization to enable software portability across various architectures. Relying on fine-grained computations, the novel task-based implementation is capable of taking advantage of the identity structure of the matrix involved during the QDWH iterations, which decreases the overall algorithmic complexity. Furthermore, the artifactual synchronization points have been weakened compared to previous implementations, unveiling look-ahead opportunities for better hardware occupancy. The overall QDWH-based polar decomposition can then be represented as a directed acyclic graph (DAG), where nodes represent computational tasks and edges define the inter-task data dependencies. The StarPU dynamic runtime system is employed to traverse the DAG, to track the various data dependencies and to asynchronously schedule the computational tasks on the underlying hardware resources, resulting in an out-of-order task scheduling. Benchmarking experiments show significant improvements against existing state-of-the-art high performance implementations for the polar decomposition on latest shared-memory vendors' systems, while maintaining numerical accuracy.

Asynchronous Task-Based Polar Decomposition on Single Node Manycore Architectures

KAUST Repository

Sukkari, Dalal E.

2017-09-29

This paper introduces the first asynchronous, task-based formulation of the polar decomposition and its corresponding implementation on manycore architectures. Based on a formulation of the iterative QR dynamically-weighted Halley algorithm (QDWH) for the calculation of the polar decomposition, the proposed implementation replaces the original LU factorization for the condition number estimator by the more adequate QR factorization to enable software portability across various architectures. Relying on fine-grained computations, the novel task-based implementation is capable of taking advantage of the identity structure of the matrix involved during the QDWH iterations, which decreases the overall algorithmic complexity. Furthermore, the artifactual synchronization points have been weakened compared to previous implementations, unveiling look-ahead opportunities for better hardware occupancy. The overall QDWH-based polar decomposition can then be represented as a directed acyclic graph (DAG), where nodes represent computational tasks and edges define the inter-task data dependencies. The StarPU dynamic runtime system is employed to traverse the DAG, to track the various data dependencies and to asynchronously schedule the computational tasks on the underlying hardware resources, resulting in an out-of-order task scheduling. Benchmarking experiments show significant improvements against existing state-of-the-art high performance implementations for the polar decomposition on latest shared-memory vendors\\' systems, while maintaining numerical accuracy.

A Low Cost VLSI Architecture for Spike Sorting Based on Feature Extraction with Peak Search

Directory of Open Access Journals (Sweden)

Yuan-Jyun Chang

2016-12-01

Full Text Available The goal of this paper is to present a novel VLSI architecture for spike sorting with high classification accuracy, low area costs and low power consumption. A novel feature extraction algorithm with low computational complexities is proposed for the design of the architecture. In the feature extraction algorithm, a spike is separated into two portions based on its peak value. The area of each portion is then used as a feature. The algorithm is simple to implement and less susceptible to noise interference. Based on the algorithm, a novel architecture capable of identifying peak values and computing spike areas concurrently is proposed. To further accelerate the computation, a spike can be divided into a number of segments for the local feature computation. The local features are subsequently merged with the global ones by a simple hardware circuit. The architecture can also be easily operated in conjunction with the circuits for commonly-used spike detection algorithms, such as the Non-linear Energy Operator (NEO. The architecture has been implemented by an Application-Specific Integrated Circuit (ASIC with 90-nm technology. Comparisons to the existing works show that the proposed architecture is well suited for real-time multi-channel spike detection and feature extraction requiring low hardware area costs, low power consumption and high classification accuracy.

Network Structures in a Society Composed of Individuals with Utilities DependingStudy of Object-Oriented Model for the Knowledge Base System

OpenAIRE

Mingwei, Zhao; Yanzhong, Dang

2005-01-01

Based on the analysis of object-oriented model, knowledge base and knowledge base system by using theories on object-oriented and knowledge base, the relationships between object-oriented model and knowledge base are discussed in this paper. The architecture of object-oriented knowledge system is proposed and the Rule-Case-Based Reasoning knowledge base system is designed.

Non-Planar Nanotube and Wavy Architecture Based Ultra-High Performance Field Effect Transistors

KAUST Repository

Hanna, Amir

2016-11-01

This dissertation presents a unique concept for a device architecture named the nanotube (NT) architecture, which is capable of higher drive current compared to the Gate-All-Around Nanowire architecture when applied to heterostructure Tunnel Field Effect Transistors. Through the use of inner/outer core-shell gates, heterostructure NT TFET leverages physically larger tunneling area thus achieving higher driver current (ION) and saving real estates by eliminating arraying requirement. We discuss the physics of p-type (Silicon/Indium Arsenide) and n-type (Silicon/Germanium hetero-structure) based TFETs. Numerical TCAD simulations have shown that NT TFETs have 5x and 1.6 x higher normalized ION when compared to GAA NW TFET for p and n-type TFETs, respectively. This is due to the availability of larger tunneling junction cross sectional area, and lower Shockley-Reed-Hall recombination, while achieving sub 60 mV/dec performance for more than 5 orders of magnitude of drain current, thus enabling scaling down of Vdd to 0.5 V. This dissertation also introduces a novel thin-film-transistors architecture that is named the Wavy Channel (WC) architecture, which allows for extending device width by integrating vertical fin-like substrate corrugations giving rise to up to 50% larger device width, without occupying extra chip area. The novel architecture shows 2x higher output drive current per unit chip area when compared to conventional planar architecture. The current increase is attributed to both the extra device width and 50% enhancement in field effect mobility due to electrostatic gating effects. Digital circuits are fabricated to demonstrate the potential of integrating WC TFT based circuits. WC inverters have shown 2× the peak-to-peak output voltage for the same input, and ~2× the operation frequency of the planar inverters for the same peak-to-peak output voltage. WC NAND circuits have shown 2× higher peak-to-peak output voltage, and 3× lower high-to-low propagation

Architecture Between Mind and Empirical Experience

Directory of Open Access Journals (Sweden)

Shatha Abbas Hassan

2016-10-01

Full Text Available The research aims to identify the level of balance in the architectural thought influenced by the rational type human consciousness, the materialistic based on the Empirical type, moral based on human experience as source of knowledge. This was reflected in architecture in the specialized thought that the mind is the source of knowledge which explains the phenomena of life. The rational approach based on objectivity and methodology in (Form Production, the other approach is based on subjectivity in form production (Form Inspiration. The research problem is that there is imbalance in the relationship between the rational side and the human experience in architecture, which led into imbalance between theory and application in architecture according to architectural movements.

Ontology of a scene based on Java 3D architecture.

Directory of Open Access Journals (Sweden)

Rubén González Crespo

2009-12-01

Full Text Available The present article seeks to make an approach to the class hierarchy of a scene built with the architecture Java 3D, to develop an ontology of a scene as from the semantic essential components for the semantic structuring of the Web3D. Java was selected because the language recommended by the W3C Consortium for the Development of the Web3D oriented applications as from X3D standard is Xj3D which compositionof their Schemas is based the architecture of Java3D In first instance identifies the domain and scope of the ontology, defining classes and subclasses that comprise from Java3D architecture and the essential elements of a scene, as its point of origin, the field of rotation, translation The limitation of the scene and the definition of shaders, then define the slots that are declared in RDF as a framework for describing the properties of the classes established from identifying thedomain and range of each class, then develops composition of the OWL ontology on SWOOP Finally, be perform instantiations of the ontology building for a Iconosphere object as from class expressions defined.

Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones

Directory of Open Access Journals (Sweden)

Stahl Stenslie

2017-04-01

Full Text Available This article describes the art and architectural research project Preemptive Architecture that uses artistic strategies and approaches to create bomb-ready architectural structures that act as instruments for the undoing of violence in war. Increasing environmental usability through destruction represents an inverse strategy that reverses common thinking patterns about warfare, art and architecture. Building structures predestined for a construc­tive destruction becomes a creative act. One of the main motivations behind this paper is to challenge and expand the material thinking as well as the socio-political conditions related to artistic, architectural and design based practices.   Article received: December 12, 2016; Article accepted: January 10, 2017; Published online: April 20, 2017 Original scholarly paper How to cite this article: Stenslie, Stahl, and Magne Wiggen. "Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones." AM Journal of Art and Media Studies 12 (2017: 29-39. doi: 10.25038/am.v0i12.165

Applications of Case Based Organizational Memory Supported by the PAbMM Architecture

Directory of Open Access Journals (Sweden)

Martín

2017-04-01

Full Text Available In the aim to manage and retrieve the organizational knowledge, in the last years numerous proposals of models and tools for knowledge management and knowledge representation have arisen. However, most of them store knowledge in a non-structured or semi-structured way, hindering the semantic and automatic processing of this knowledge. In this paper we present a more detailed case-based organizational memory ontology, which aims at contributing to the design of an organizational memory based on cases, so that it can be used to learn, reasoning, solve problems, and as support to better decision making as well. The objective of this Organizational Memory is to serve as base for the organizational knowledge exchange in a processing architecture specialized in the measurement and evaluation. In this way, our processing architecture is based on the C-INCAMI framework (Context-Information Need, Concept model, Attribute, Metric and Indicator for defining the measurement projects. Additionally, the proposal architecture uses a big data repository to make available the data for consumption and to manage the Organizational Memory, which allows a feedback mechanism in relation with online processing. In order to illustrate its utility, two practical cases are explained: A pasture predictor system, using the data of the weather radar (WR of the Experimental Agricultural Station (EAS INTA Anguil (La Pampa State, Argentina and an outpatient monitoring scenario. Future trends and concluding remarks are extended.

A novel configurable VLSI architecture design of window-based image processing method

Science.gov (United States)

Zhao, Hui; Sang, Hongshi; Shen, Xubang

2018-03-01

Most window-based image processing architecture can only achieve a certain kind of specific algorithms, such as 2D convolution, and therefore lack the flexibility and breadth of application. In addition, improper handling of the image boundary can cause loss of accuracy, or consume more logic resources. For the above problems, this paper proposes a new VLSI architecture of window-based image processing operations, which is configurable and based on consideration of the image boundary. An efficient technique is explored to manage the image borders by overlapping and flushing phases at the end of row and the end of frame, which does not produce new delay and reduce the overhead in real-time applications. Maximize the reuse of the on-chip memory data, in order to reduce the hardware complexity and external bandwidth requirements. To perform different scalar function and reduction function operations in pipeline, this can support a variety of applications of window-based image processing. Compared with the performance of other reported structures, the performance of the new structure has some similarities to some of the structures, but also superior to some other structures. Especially when compared with a systolic array processor CWP, this structure at the same frequency of approximately 12.9% of the speed increases. The proposed parallel VLSI architecture was implemented with SIMC 0.18-μm CMOS technology, and the maximum clock frequency, power consumption, and area are 125Mhz, 57mW, 104.8K Gates, respectively, furthermore the processing time is independent of the different window-based algorithms mapped to the structure

New optical architecture for holographic data storage system compatible with Blu-ray Disc™ system

Science.gov (United States)

Shimada, Ken-ichi; Ide, Tatsuro; Shimano, Takeshi; Anderson, Ken; Curtis, Kevin

2014-02-01

A new optical architecture for holographic data storage system which is compatible with a Blu-ray Disc™ (BD) system is proposed. In the architecture, both signal and reference beams pass through a single objective lens with numerical aperture (NA) 0.85 for realizing angularly multiplexed recording. The geometry of the architecture brings a high affinity with an optical architecture in the BD system because the objective lens can be placed parallel to a holographic medium. Through the comparison of experimental results with theory, the validity of the optical architecture was verified and demonstrated that the conventional objective lens motion technique in the BD system is available for angularly multiplexed recording. The test-bed composed of a blue laser system and an objective lens of the NA 0.85 was designed. The feasibility of its compatibility with BD is examined through the designed test-bed.

ReSeg: A Recurrent Neural Network-Based Model for Semantic Segmentation

OpenAIRE

Visin, Francesco; Ciccone, Marco; Romero, Adriana; Kastner, Kyle; Cho, Kyunghyun; Bengio, Yoshua; Matteucci, Matteo; Courville, Aaron

2015-01-01

We propose a structured prediction architecture, which exploits the local generic features extracted by Convolutional Neural Networks and the capacity of Recurrent Neural Networks (RNN) to retrieve distant dependencies. The proposed architecture, called ReSeg, is based on the recently introduced ReNet model for image classification. We modify and extend it to perform the more challenging task of semantic segmentation. Each ReNet layer is composed of four RNN that sweep the image horizontally ...

High Dynamic Range adaptive ΔΣ-based Focal Plane Array architecture

KAUST Repository

Yao, Shun; Kavusi, Sam; Salama, Khaled N.

2012-01-01

In this paper, an Adaptive Delta-Sigma based architecture for High Dynamic Range (HDR) Focal Plane Arrays is presented. The noise shaping effect of the Delta-Sigma modulation in the low end, and the distortion noise induced in the high end of Photo

Implementing the competences-based students-centered learning approach in Architectural Design Education. The case of the T MEDA Pilot Architectural Program at the Hashemite University (Jordan

Directory of Open Access Journals (Sweden)

Ahmad A. S. Al Husban

2016-11-01

Full Text Available Higher educational systems become increasingly oriented towards the competences-based student-centered learning and outcome approach. Worldwide, these systems are focusing on the students as a whole: focusing on their dimensional, intellectual, professional, psychological, moral, and spiritual. This research was conducted in an attempt to answer the main research question: how can the architectural design courses be designed based on the required competences and how can the teaching, learning activities and assessment methods be structured and aligned in order to allow students to achieve and reach the intended learning outcomes? This research used a case study driven best practice research method to answer the research questions based on the T MEDA pilot architectural program that was implemented at the Hashemite University, Jordan. This research found that it is important for architectural education to adapt the students-centered learning method. Such approach increases the effectiveness of teaching and learning methods, enhances the design studio environment, and focuses on students’ engagement to develop their design process and product. Moreover, this research found that using different assessment methods in architectural design courses help students to develop their learning outcomes; and inform teachers about the effectiveness of their teaching process. Furthermore, the involvement of students in assessment produces effective learning and enhances their design motivation. However, applying competences-based students-centered learning and outcome approach needs more time and staff to apply. Another problem is that some instructors resist changing to the new methods or approaches because they prefer to use their old and traditional systems. The application for this method at the first time needs intensive recourses, more time, and good cooperation between different instructors and course coordinator. However, within the time this method

Jupiter Europa Orbiter Architecture Definition Process

Science.gov (United States)

Rasmussen, Robert; Shishko, Robert

2011-01-01

The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

Model-Based Engine Control Architecture with an Extended Kalman Filter

Science.gov (United States)

Csank, Jeffrey T.; Connolly, Joseph W.

2016-01-01

This paper discusses the design and implementation of an extended Kalman filter (EKF) for model-based engine control (MBEC). Previously proposed MBEC architectures feature an optimal tuner Kalman Filter (OTKF) to produce estimates of both unmeasured engine parameters and estimates for the health of the engine. The success of this approach relies on the accuracy of the linear model and the ability of the optimal tuner to update its tuner estimates based on only a few sensors. Advances in computer processing are making it possible to replace the piece-wise linear model, developed off-line, with an on-board nonlinear model running in real-time. This will reduce the estimation errors associated with the linearization process, and is typically referred to as an extended Kalman filter. The nonlinear extended Kalman filter approach is applied to the Commercial Modular Aero-Propulsion System Simulation 40,000 (C-MAPSS40k) and compared to the previously proposed MBEC architecture. The results show that the EKF reduces the estimation error, especially during transient operation.

Biometric technology authentication, biocryptography, and cloud-based architecture

CERN Document Server

Das, Ravi

2014-01-01

Most biometric books are either extraordinarily technical for technophiles or extremely elementary for the lay person. Striking a balance between the two, Biometric Technology: Authentication, Biocryptography, and Cloud-Based Architecture is ideal for business, IT, or security managers that are faced with the task of making purchasing, migration, or adoption decisions. It brings biometrics down to an understandable level, so that you can immediately begin to implement the concepts discussed.Exploring the technological and social implications of widespread biometric use, the book considers the

High Performance Motion-Planner Architecture for Hardware-In-the-Loop System Based on Position-Based-Admittance-Control

Directory of Open Access Journals (Sweden)

Francesco La Mura

2018-02-01

Full Text Available This article focuses on a Hardware-In-the-Loop application developed from the advanced energy field project LIFES50+. The aim is to replicate, inside a wind gallery test facility, the combined effect of aerodynamic and hydrodynamic loads on a floating wind turbine model for offshore energy production, using a force controlled robotic device, emulating floating substructure’s behaviour. In addition to well known real-time Hardware-In-the-Loop (HIL issues, the particular application presented has stringent safety requirements of the HIL equipment and difficult to predict operating conditions, so that extra computational efforts have to be spent running specific safety algorithms and achieving desired performance. To meet project requirements, a high performance software architecture based on Position-Based-Admittance-Control (PBAC is presented, combining low level motion interpolation techniques, efficient motion planning, based on buffer management and Time-base control, and advanced high level safety algorithms, implemented in a rapid real-time control architecture.

Exploration Space Suit Architecture: Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.

2010-01-01

This paper picks up where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars (Hill, Johnson, IEEEAC paper #1209) left off in the development of a space suit architecture that is modular in design and interfaces and could be reconfigured to meet the mission or during any given mission depending on the tasks or destination. This paper will walk though the continued development of a space suit system architecture, and how it should evolve to meeting the future exploration EVA needs of the United States space program. In looking forward to future US space exploration and determining how the work performed to date in the CxP and how this would map to a future space suit architecture with maximum re-use of technology and functionality, a series of thought exercises and analysis have provided a strong indication that the CxP space suit architecture is well postured to provide a viable solution for future exploration missions. Through the destination environmental analysis that is presented in this paper, the modular architecture approach provides the lowest mass, lowest mission cost for the protection of the crew given any human mission outside of low Earth orbit. Some of the studies presented here provide a look and validation of the non-environmental design drivers that will become every-increasingly important the further away from Earth humans venture and the longer they are away. Additionally, the analysis demonstrates a logical clustering of design environments that allows a very focused approach to technology prioritization, development and design that will maximize the return on investment independent of any particular program and provide architecture and design solutions for space suit systems in time or ahead of being required for any particular manned flight program in the future. The new approach to space suit design and interface definition the discussion will show how the architecture is very adaptable to programmatic and funding changes with

Quality Assurance in Architectural Education in Asia – On the Perspective of ‘Design’ Based Architectural Education and its Holistic Assessment

Directory of Open Access Journals (Sweden)

Lee Junsuk

2018-01-01

Full Text Available This paper starts by describing the importance of ‘Architecture’ to our society to our everyday life. It dominates our living environment, inevitably forms visual memories of life experience. Undoubtedly, a building is a ‘container’ to hold one’s everyday living, the grouping of architecture an urban environment is a ‘container.’ It is to hold one’s entire life. If then, there is paramount importance in realizing how we should properly educate our future ‘architects.’ First, it is important that the essential of architecture education must be based on proper ‘Design Studio’ format. Much of reasons are self described by following quotes such as ‘like art, architecture cannot be taught, but it can and should be cultivated,’ ‘Essentials of architecture can be learned through actual doing,’ ‘architecture education is most perfect liberal arts education format invented.’ Secondly, it is important to realize the vast meaning of architecture and architect to our society. Luckily, there is the Charter for UNESCO/UIA for Architectural Education which serves as not only a fundamental background to this discussion but also as ‘prior principle’ in articulating proper education for architects. Thirdly, considering the Charter as a principle, then it is worth discussing actual methodology as a working system in delivering ‘accredited/validated education.’ The KAAB’s Conditions is compared with the Charter. For an indepth look into the most important set of Conditions of the KAAB the Student Performance Criteria, the paper describes the origin, historic background, and evolvement of the ‘Student Performance Criteria,’ which is borne by the NAAB in 1980’s. As it weighs much importance of the whole accrediting process, it must be carefully written to reflect society’s needs of an architect. Also, it must not be written too specific nor should include quantitative measure, to avoid all school programs

GEARS: An Enterprise Architecture Based On Common Ground Services

Science.gov (United States)

Petersen, S.

2014-12-01

Earth observation satellites collect a broad variety of data used in applications that range from weather forecasting to climate monitoring. Within NOAA the National Environmental Satellite Data and Information Service (NESDIS) supports these applications by operating satellites in both geosynchronous and polar orbits. Traditionally NESDIS has acquired and operated its satellites as stand-alone systems with their own command and control, mission management, processing, and distribution systems. As the volume, velocity, veracity, and variety of sensor data and products produced by these systems continues to increase, NESDIS is migrating to a new concept of operation in which it will operate and sustain the ground infrastructure as an integrated Enterprise. Based on a series of common ground services, the Ground Enterprise Architecture System (GEARS) approach promises greater agility, flexibility, and efficiency at reduced cost. This talk describes the new architecture and associated development activities, and presents the results of initial efforts to improve product processing and distribution.

Image Quality Improvement on OpenGL-Based Animations by Using CUDA Architecture

Directory of Open Access Journals (Sweden)

Taner UÇKAN

2016-04-01

Full Text Available 2D or 3D rendering technology is used for graphically modelling many physical phenomena occurring in real life by means of the computers. On the other hand, the ever-increasing intensity of the graphics applications require that the image quality of the so-called modellings is enhanced and they are performed more quickly. In this direction, a new software and hardware-based architecture called CUDA has been introduced by Nvidia at the end of 2006. Thanks to this architecture, larger number of graphics processors has started contributing towards the parallel solutions of the general-purpose problems. In this study, this new parallel computing architecture is taken into consideration and an animation application consisting of humanoid robots with different behavioral characteristics is developed using the OpenGL library in C++. This animation is initially implemented on a single serial CPU and then parallelized using the CUDA architecture. Eventually, the serial and the parallel versions of the same animation are compared against each other on the basis of the number of image frames per second. The results reveal that the parallel application is by far the best yielding high quality images.

Marshall Application Realignment System (MARS) Architecture

Science.gov (United States)

Belshe, Andrea; Sutton, Mandy

2010-01-01

The Marshall Application Realignment System (MARS) Architecture project was established to meet the certification requirements of the Department of Defense Architecture Framework (DoDAF) V2.0 Federal Enterprise Architecture Certification (FEAC) Institute program and to provide added value to the Marshall Space Flight Center (MSFC) Application Portfolio Management process. The MARS Architecture aims to: (1) address the NASA MSFC Chief Information Officer (CIO) strategic initiative to improve Application Portfolio Management (APM) by optimizing investments and improving portfolio performance, and (2) develop a decision-aiding capability by which applications registered within the MSFC application portfolio can be analyzed and considered for retirement or decommission. The MARS Architecture describes a to-be target capability that supports application portfolio analysis against scoring measures (based on value) and overall portfolio performance objectives (based on enterprise needs and policies). This scoring and decision-aiding capability supports the process by which MSFC application investments are realigned or retired from the application portfolio. The MARS Architecture is a multi-phase effort to: (1) conduct strategic architecture planning and knowledge development based on the DoDAF V2.0 six-step methodology, (2) describe one architecture through multiple viewpoints, (3) conduct portfolio analyses based on a defined operational concept, and (4) enable a new capability to support the MSFC enterprise IT management mission, vision, and goals. This report documents Phase 1 (Strategy and Design), which includes discovery, planning, and development of initial architecture viewpoints. Phase 2 will move forward the process of building the architecture, widening the scope to include application realignment (in addition to application retirement), and validating the underlying architecture logic before moving into Phase 3. The MARS Architecture key stakeholders are most

Extraocular muscle architecture in hawks and owls.

Science.gov (United States)

Plochocki, Jeffrey H; Segev, Tamar; Grow, Wade; Hall, Margaret I

2018-02-06

A complete and accurate understanding of extraocular muscle function is important to the veterinary care of the avian eye. This is especially true for birds of prey, which rely heavily on vision for survival and yet are prone to ocular injury and disease. To better understand the function of extraocular muscles in birds of prey, we studied extraocular muscle architecture grossly and histologically. This sample was composed of two each of the following species: red-tailed hawk (Buteo jamaicensis), Harris's hawk (Parabuteo unicinctus), great horned owl (Bubo virginianus), and barn owl (Tyto alba). All extraocular muscles were dissected and weighed. To analyze muscle fiber architecture, the superior oblique and quadratus muscles were dissected, weighed, and sectioned at 5 μm thickness in the transverse plane. We calculated the physiologic cross-sectional area and the ratio of muscle mass to predicted effective maximum tetanic tension. Hawk and owl extraocular muscles exhibit significant physiological differences that play roles in ocular movements and closure of the nictitating membrane. Owls, which do not exhibit extraocular movement, have muscle architecture suited to stabilize the position of a massive, tubular eye that protrudes significantly from the orbit. Hawks, which have a more globose eye that is largely contained within the orbit, do not require as much muscular stability and instead have muscle architecture that facilitates rapid eye movement. © 2018 American College of Veterinary Ophthalmologists.

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

Semantic-Web Architecture for Electronic Discharge Summary Based on OWL 2.0 Standard.

Science.gov (United States)

Tahmasebian, Shahram; Langarizadeh, Mostafa; Ghazisaeidi, Marjan; Safdari, Reza

2016-06-01

Patients' electronic medical record contains all information related to treatment processes during hospitalization. One of the most important documents in this record is the record summary. In this document, summary of the whole treatment process is presented which is used for subsequent treatments and other issues pertaining to the treatment. Using suitable architecture for this document, apart from the aforementioned points we can use it in other fields such as data mining or decision making based on the cases. In this study, at first, a model for patient's medical record summary has been suggested using semantic web-based architecture. Then, based on service-oriented architecture and using Java programming language, a software solution was designed and run in a way to generate medical record summary with this structure and at the end, new uses of this structure was explained. in this study a structure for medical record summaries along with corrective points within semantic web has been offered and a software running within Java along with special ontologies are provided. After discussing the project with the experts of medical/health data management and medical informatics as well as clinical experts, it became clear that suggested design for medical record summary apart from covering many issues currently faced in the medical records has also many advantages including its uses in research projects, decision making based on the cases etc.

The Simulation Intranet Architecture

Energy Technology Data Exchange (ETDEWEB)

Holmes, V.P.; Linebarger, J.M.; Miller, D.J.; Vandewart, R.L.

1998-12-02

The Simdarion Infranet (S1) is a term which is being used to dcscribc one element of a multidisciplinary distributed and distance computing initiative known as DisCom2 at Sandia National Laboratory (http ct al. 1998). The Simulation Intranet is an architecture for satisfying Sandia's long term goal of providing an end- to-end set of scrviccs for high fidelity full physics simu- lations in a high performance, distributed, and distance computing environment. The Intranet Architecture group was formed to apply current distributed object technologies to this problcm. For the hardware architec- tures and software models involved with the current simulation process, a CORBA-based architecture is best suited to meet Sandia's needs. This paper presents the initial desi-a and implementation of this Intranct based on a three-tier Network Computing Architecture(NCA). The major parts of the architecture include: the Web Cli- ent, the Business Objects, and Data Persistence.

An Architecture Offering Mobile Pollution Sensing with High Spatial Resolution

Directory of Open Access Journals (Sweden)

Oscar Alvear

2016-01-01

Full Text Available Mobile sensing is becoming the best option to monitor our environment due to its ease of use, high flexibility, and low price. In this paper, we present a mobile sensing architecture able to monitor different pollutants using low-end sensors. Although the proposed solution can be deployed everywhere, it becomes especially meaningful in crowded cities where pollution values are often high, being of great concern to both population and authorities. Our architecture is composed of three different modules: a mobile sensor for monitoring environment pollutants, an Android-based device for transferring the gathered data to a central server, and a central processing server for analyzing the pollution distribution. Moreover, we analyze different issues related to the monitoring process: (i filtering captured data to reduce the variability of consecutive measurements; (ii converting the sensor output to actual pollution levels; (iii reducing the temporal variations produced by mobile sensing process; and (iv applying interpolation techniques for creating detailed pollution maps. In addition, we study the best strategy to use mobile sensors by first determining the influence of sensor orientation on the captured values and then analyzing the influence of time and space sampling in the interpolation process.

Exploration of Heterogeneous FPGA Architectures

Directory of Open Access Journals (Sweden)

Umer Farooq

2011-01-01

mesh and tree-based architectures are evaluated for three sets of benchmark circuits. Experimental results show that a more flexible floor-planning in mesh-based FPGA gives better results as compared to the column-based floor-planning. Also it is shown that compared to different floor-plannings of mesh-based FPGA, tree-based architecture gives better area, performance, and power results.

Learning based upon projects of architectural conservation: from university to real life

OpenAIRE

Mileto, Camilla; Vegas López-Manzanares, Fernando; Cristini, Valentina; Diodato, Maria

2011-01-01

Mileto, C.; Vegas López-Manzanares, F.; Cristini, V.; Diodato, M. (2011). Learning based upon projects of architectural conservation: from university to real life. IATED. 1-8. http://hdl.handle.net/10251/50072 Senia 1 8

SETH: A Hierarchical, Agent-based Architecture for Smart Spaces

OpenAIRE

Marsá Maestre, Iván

2008-01-01

The ultimate goal of any smart environment is to release users from the tasks they usually perform to achieve comfort, efficiency, and service personalization. To achieve this goal, we propose to use multiagent systems. In this report we describe the SETH architectur: a hierarchical, agent-based solution intended to be applicable to different smart space scenarios, ranging from small environments, like smart homes or smart offices, to large smart spaces like cities.

Embedded active vision system based on an FPGA architecture

OpenAIRE

Chalimbaud , Pierre; Berry , François

2006-01-01

International audience; In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision) is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks,...

Place-Based Education in the Architectural Design Studio: Agrarian Landscape as a Resource for Sustainable Urban Lifestyle

Directory of Open Access Journals (Sweden)

Ana Nikezić

2015-07-01

Full Text Available This article highlights how “place-based education” can be used to raise awareness about sustainability and potentially influence design process decisions that have environmental and cultural implications. “Place-based education” is a term used to describe an educational worldview based on development of curriculum centered on the local, social, economic, and ecological resources of a community. The study shows results of Masters Students’ research on situating a housing complex in the context of the agrarian landscape of Vojvodina, Serbia, considering it as a resource for a new sustainable urban lifestyle. During the first year of Masters Studies at the Faculty of Architecture, Belgrade University, an architectural design studio with 15 students had the task of exploring the potential of expanding the city of Belgrade across the agrarian landscape, as to affirm the role of place in contemporary everyday life. Students were expected to explore the possibilities and limitations of the relationship between man and agrarian landscape via architecture, re-thinking how various architectural design approaches could balance and harmonize the impact of the built environment on the agrarian landscape. The paper shows that “place-based education” possesses elements necessary for the inclusion of a wider spatial-cultural context in the process of architectural design and prioritization of environmental literacy and responsibility, as one of the main components of sustainable development.

Architecture on Architecture

DEFF Research Database (Denmark)

Olesen, Karen

2016-01-01

that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...... correlation between the study of existing architectures and the training of competences to design for present-day realities.......This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...

Synthesis of Mn-doped ZnS architectures in ternary solution and their optical properties

Energy Technology Data Exchange (ETDEWEB)

Wang Xinjuan, E-mail: wangxj@hnu.edu.cn [State Key lab of CBSC, Micronano Research Center, Hunan University, Changsha 410082 (China); Zhang Qinglin [State Key lab of CBSC, Micronano Research Center, Hunan University, Changsha 410082 (China); Zou Bingsuo, E-mail: zoubs@bit.edu.cn [State Key lab of CBSC, Micronano Research Center, Hunan University, Changsha 410082 (China); Micro-nano Technology Center and School of MSE, BIT, Beijing 100081 (China); Lei Aihua; Ren Pinyun [State Key lab of CBSC, Micronano Research Center, Hunan University, Changsha 410082 (China)

2011-10-01

Mn-doped ZnS sea urchin-like architectures were fabricated by a one-pot solvothermal route in a ternary solution made of ethylenediamine, ethanolamine and distilled water. The as-prepared products were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and photoluminescence spectra (PL). It was demonstrated that the as-prepared sea urchin-like architectures with diameter of 0.5-1.5 {mu}m were composed of nanorods, possessing a wurtzite structures. The preferred growth orientation of nanorods was found to be the [0 0 2] direction. The PL spectra of the Mn-doped ZnS sea urchin-like architectures show a strong orange emission at 587 nm, indicating the successful doping of Mn{sup 2+} ions into ZnS host. Ethanolamine played the role of oriented-assembly agent in the formation of sea urchin-like architectures. A possible growth mechanism was proposed to explain the formation of sea urchin-like architectures.

Synthesis of Mn-doped ZnS architectures in ternary solution and their optical properties

International Nuclear Information System (INIS)

Wang Xinjuan; Zhang Qinglin; Zou Bingsuo; Lei Aihua; Ren Pinyun

2011-01-01

Mn-doped ZnS sea urchin-like architectures were fabricated by a one-pot solvothermal route in a ternary solution made of ethylenediamine, ethanolamine and distilled water. The as-prepared products were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and photoluminescence spectra (PL). It was demonstrated that the as-prepared sea urchin-like architectures with diameter of 0.5-1.5 μm were composed of nanorods, possessing a wurtzite structures. The preferred growth orientation of nanorods was found to be the [0 0 2] direction. The PL spectra of the Mn-doped ZnS sea urchin-like architectures show a strong orange emission at 587 nm, indicating the successful doping of Mn 2+ ions into ZnS host. Ethanolamine played the role of oriented-assembly agent in the formation of sea urchin-like architectures. A possible growth mechanism was proposed to explain the formation of sea urchin-like architectures.

Research on fine management and visualization of ancient architectures based on integration of 2D and 3D GIS technology

International Nuclear Information System (INIS)

Jun, Yan; Shaohua, Wang; Jiayuan, Li; Qingwu, Hu

2014-01-01

Aimed at ancient architectures which own the characteristics of huge data quantity, fine-grained and high-precise, a 3D fine management and visualization method for ancient architectures based on the integration of 2D and 3D GIS is proposed. Firstly, after analysing various data types and characters of digital ancient architectures, main problems and key technologies existing in the 2D and 3D data management are discussed. Secondly, data storage and indexing model of digital ancient architecture based on 2D and 3D GIS integration were designed and the integrative storage and management of 2D and 3D data were achieved. Then, through the study of data retrieval method based on the space-time indexing and hierarchical object model of ancient architecture, 2D and 3D interaction of fine-grained ancient architectures 3D models was achieved. Finally, take the fine database of Liangyi Temple belonging to Wudang Mountain as an example, fine management and visualization prototype of 2D and 3D integrative digital ancient buildings of Liangyi Temple was built and achieved. The integrated management and visual analysis of 10GB fine-grained model of the ancient architecture was realized and a new implementation method for the store, browse, reconstruction, and architectural art research of ancient architecture model was provided

Attentional Bias to Beauty with Evolutionary Benefits: Evidence from Aesthetic Appraisal of Landscape Architecture

Science.gov (United States)

Zhang, Wei; Tang, Xiaoxiang; He, Xianyou; Lai, Shuxian

2018-01-01

Substantial evidence suggests that beauty is associated with the survival and reproduction of organisms. Landscape architecture is composed of a series of natural elements that have significant evolutionary implications. The present study used one pilot material ratings and three experiments to examine the mechanisms of aesthetic appraisals of landscape architecture. The results confirmed that landscape architecture elicited a sense of beauty and captured visual attention more easily than other types of architecture during explicit aesthetic rating task (Experiment 1) and implicit aesthetic perception task (dot-probe paradigm, Experiment 2). Furthermore, the spatial cueing paradigm revealed that response latencies were significantly faster for landscape architecture than non-landscape architecture on valid trials, but there was no significant difference in this contrast on invalid trials at 150-ms stimulus onset asynchrony (SOA, Experiment 3a). At 500-ms SOA (Experiment 3b), participants responded significantly faster for landscape architecture on valid trials, but reacted significantly slower for landscape architecture on invalid trials. The findings indicated that the beauty of landscape architecture can be perceived implicitly, and only faster orienting of attention, but not delayed disengagement of attention was generated at early stages of the processing of landscape architecture. However, the attentional bias at later stages of attentional processes may be resulted from both faster orienting of attention and delayed disengagement of attention from landscape architecture photographs. PMID:29467696

Attentional Bias to Beauty with Evolutionary Benefits: Evidence from Aesthetic Appraisal of Landscape Architecture.

Science.gov (United States)

Zhang, Wei; Tang, Xiaoxiang; He, Xianyou; Lai, Shuxian

2018-01-01

Substantial evidence suggests that beauty is associated with the survival and reproduction of organisms. Landscape architecture is composed of a series of natural elements that have significant evolutionary implications. The present study used one pilot material ratings and three experiments to examine the mechanisms of aesthetic appraisals of landscape architecture. The results confirmed that landscape architecture elicited a sense of beauty and captured visual attention more easily than other types of architecture during explicit aesthetic rating task (Experiment 1) and implicit aesthetic perception task (dot-probe paradigm, Experiment 2). Furthermore, the spatial cueing paradigm revealed that response latencies were significantly faster for landscape architecture than non-landscape architecture on valid trials, but there was no significant difference in this contrast on invalid trials at 150-ms stimulus onset asynchrony (SOA, Experiment 3a). At 500-ms SOA (Experiment 3b), participants responded significantly faster for landscape architecture on valid trials, but reacted significantly slower for landscape architecture on invalid trials. The findings indicated that the beauty of landscape architecture can be perceived implicitly, and only faster orienting of attention, but not delayed disengagement of attention was generated at early stages of the processing of landscape architecture. However, the attentional bias at later stages of attentional processes may be resulted from both faster orienting of attention and delayed disengagement of attention from landscape architecture photographs.

Avionics Architecture for Exploration

Data.gov (United States)

National Aeronautics and Space Administration — The goal of the AES Avionics Architectures for Exploration (AAE) project is to develop a reference architecture that is based on standards and that can be scaled and...

INFORMATION ARCHITECTURE ANALYSIS USING BUSINESS INTELLIGENCE TOOLS BASED ON THE INFORMATION NEEDS OF EXECUTIVES

Directory of Open Access Journals (Sweden)

Fabricio Sobrosa Affeldt

2013-08-01

Full Text Available Devising an information architecture system that enables an organization to centralize information regarding its operational, managerial and strategic performance is one of the challenges currently facing information technology. The present study aimed to analyze an information architecture system developed using Business Intelligence (BI technology. The analysis was performed based on a questionnaire enquiring as to whether the information needs of executives were met during the process. A theoretical framework was applied consisting of information architecture and BI technology, using a case study methodology. Results indicated that the transaction processing systems studied did not meet the information needs of company executives. Information architecture using data warehousing, online analytical processing (OLAP tools and data mining may provide a more agile means of meeting these needs. However, some items must be included and others modified, in addition to improving the culture of information use by company executives.

Preference-Based Design in Architecture

NARCIS (Netherlands)

Binnekamp, R.

2010-01-01

Architectural design is a complex process as a result of two prominent characteristics of choice making: 1) multiple designs can fit into one intended purpose, which raises the question: how to choose the design that fits best, and 2) a multitude of decision makers have an interest in the design

Research of Ancient Architectures in Jin-Fen Area Based on GIS and BIM Technology

International Nuclear Information System (INIS)

Jia, Jing; Zheng, Qiuhong; Gao, Huiying; Sun, Hai

2017-01-01

The number of well-preserved ancient buildings located in Shanxi Province, enjoying the absolute maximum proportion of ancient architectures in China, is about 18418, among which, 9053 buildings have the structural style of wood frame. The value of the application of BIM (Building Information Modeling) and GIS (Geographic Information System) is gradually probed and testified in the corresponding fields of ancient architecture’s spatial distribution information management, routine maintenance and special conservation and restoration, the evaluation and simulation of related disasters, such as earthquake. The research objects are ancient architectures in JIN-FEN area, which were first investigated by Sicheng LIANG and recorded in his work of “Chinese ancient architectures survey report”. The research objects, i.e. the ancient architectures in Jin-Fen area include those in Sicheng LIANG’s investigation, and further adjustments were made through authors’ on-site investigation and literature searching and collection. During this research process, the spatial distributing Geodatabase of research objects is established utilizing GIS. The BIM components library for ancient buildings is formed combining on-site investigation data and precedent classic works, such as “Yingzao Fashi”, a treatise on architectural methods in Song Dynasty, “Yongle Encyclopedia” and “Gongcheng Zuofa Zeli”, case collections of engineering practice, by the Ministry of Construction of Qing Dynasty. A building of Guangsheng temple in Hongtong county is selected as an example to elaborate the BIM model construction process based on the BIM components library for ancient buildings. Based on the foregoing work results of spatial distribution data, attribute data of features, 3D graphic information and parametric building information model, the information management system for ancient architectures in Jin-Fen Area, utilizing GIS and BIM technology, could be constructed to support

Conflict-induced Migration of Composers: An Individual-level Study

DEFF Research Database (Denmark)

Borowiecki, Karol Jan

2013-01-01

Research on the causes of conflict-induced migration is hindered by the lack of adequately disaggregated data. The underlying study overcomes this problem by employment of historical data on 164 prominent classical composers born after 1800. We analyze the impact of war on the probability to emig...... responses to war based on individual’s quality. While the better composers are more likely to emigrate in times of peace, it is not so anymore if a war breaks out. In times of war, all artists are affected by war and are prone to emigrate....

Greek architecture now

DEFF Research Database (Denmark)

Skousbøll, Karin Merete

2006-01-01

With the author's Scandinavian viewpoint the aim of this book has been an investigation into contemporary Greek architecture and at the same time providing an understanding for its essential characteristics based on the historic, cultural heritage of Hellas.......With the author's Scandinavian viewpoint the aim of this book has been an investigation into contemporary Greek architecture and at the same time providing an understanding for its essential characteristics based on the historic, cultural heritage of Hellas....

Hierarchical nitrogen doped bismuth niobate architectures: Controllable synthesis and excellent photocatalytic activity

International Nuclear Information System (INIS)

Hou, Jungang; Cao, Rui; Wang, Zheng; Jiao, Shuqiang; Zhu, Hongmin

2012-01-01

Graphical abstract: Efficient visible-light-driven photocatalysts of peony-like nitrogen doped Bi 3 NbO 7 hierarchical architectures and silver-layered Bi 3 NbO 7−x Nx heterostructures were successfully synthesized in this discovery. Highlights: ► N-Bi 3 NbO 7 architectures were synthesized via two-step hydrothermal process. ► Electronic structure calculations indicated that N replaced O in samples. ► Growth mechanism is proposed for transformation of nanoparticles to microflowers. ► Excellent activities of N-Bi 3 NbO 7 architectures were obtained for degradation. ► Enhanced photocatalytic performance was observed for Ag/N-Bi 3 NbO 7 architectures. - Abstract: Nitrogen doped bismuth niobate (N-Bi 3 NbO 7 ) hierarchical architectures were synthesized via a facile two-step hydrothermal process. XRD patterns revealed that the defect fluorite-type crystal structure of Bi 3 NbO 7 remained intact upon nitrogen doping. Electron microscopy showed the N-Bi 3 NbO 7 architecture has a unique peony-like spherical superstructure composed of numerous nanosheets. UV–vis spectra indicated that nitrogen doping in the compound results in a red-shift of the absorption edge from 450 nm to 470 nm. XPS indicated that [Bi/Nb]-N bonds were formed by inducing nitrogen to replace a small amount of oxygen in Bi 3 NbO 7−x N x , which is explained by electronic structure calculations including energy band and density of states. Based on observations of architectures formation, a possible growth mechanism was proposed to explain the transformation of polyhedral-like nanoparticles to peony-like microflowers via an Ostwald riping mechanism followed by self-assembly. The N-Bi 3 NbO 7 architectures due to the large specific surface area and nitrogen doping exhibited higher photocatalytic activities in the decomposition of organic pollutant under visible-light irradiation than Bi 3 NbO 7 nanoparticles. Furthermore, an enhanced photocatalytic performance was also observed for Ag

Composing hope through collage: A community-based intervention for cancer survivors living with lymphedema

Directory of Open Access Journals (Sweden)

Roanne Thomas

2016-07-01

Full Text Available Secondary lymphedema after cancer may result in distress, yet few interventions exist to support coping skills in this population. As part of a community-based intervention, we piloted the use of creative practices to promote active orientations to hope. A total of 19 participants completed the workshops; 11 collaged. The main themes address the collage processes as well as their content. The former addresses sub-themes such as selecting/composing. The latter includes sub-themes related to movement depicted in the collages. Collages and their associated discussions concretized hoping as an active and accessible process for participants living with two chronic illnesses.

Q&A: The AI composer

Science.gov (United States)

Spinney, Laura

2017-09-01

Computer scientist Luc Steels uses artificial intelligence to explore the origins and evolution of language. He is best known for his 1999-2001 Talking Heads Experiment, in which robots had to construct a language from scratch to communicate with each other. Now Steels, who works at the Free University of Brussels (VUB), has composed an opera based on the legend of Faust, with a twenty-first-century twist. He talks about Mozart as a nascent computer programmer, how music maps onto language, and the blurred boundaries of a digitized world.

Information architecture. Volume 3: Guidance

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The purpose of this document, as presented in Volume 1, The Foundations, is to assist the Department of Energy (DOE) in developing and promulgating information architecture guidance. This guidance is aimed at increasing the development of information architecture as a Departmentwide management best practice. This document describes departmental information architecture principles and minimum design characteristics for systems and infrastructures within the DOE Information Architecture Conceptual Model, and establishes a Departmentwide standards-based architecture program. The publication of this document fulfills the commitment to address guiding principles, promote standard architectural practices, and provide technical guidance. This document guides the transition from the baseline or defacto Departmental architecture through approved information management program plans and budgets to the future vision architecture. This document also represents another major step toward establishing a well-organized, logical foundation for the DOE information architecture.

Utilizing a multiprocessor architecture - The performance of MIDAS

International Nuclear Information System (INIS)

Maples, C.; Logan, D.; Meng, J.; Rathbun, W.; Weaver, D.

1983-01-01

The MIDAS architecture organizes multiple CPUs into clusters called distributed subsystems. Each subsystem consists of an array of processors controlled by a supervisory CPU. The multiprocessor array is composed of commercial CPUs (with floating point hardware) and specialized processing elements. Interprocessor communication within the array may occur either through switched memory modules or common shared memory. The architecture permits multiple processors to be focused on single problems. A distributed subsystem has been constructed and tested. It currently consists of a supervisor CPU; 16 blocks of independently switchable memory; 9 general purpose, VAX-class CPUs; and 2 specialized pipelined processors to handle I/O. Results on a variety of problems indicate that the subsystem performs 8 to 15 times faster than a standard computer with an identical CPU. The difference in performance represents the effect of differing CPU and I/O requirements

Phase behaviour and microstructure of the micro-emulsions composed of cholinium-based ionic liquid, Triton X-100 and water

International Nuclear Information System (INIS)

Pei, Yuanchao; Huang, Yanjie; Li, Lin; Wang, Jianji

2014-01-01

Highlights: • The microemulsions composed of cholinium-based ionic liquid, Triton X-100 and water have been prepared and characterised. • Ternary phase diagrams of the microemulsions have been established at T = 298.15 K. • The microemulsions exhibit IL-in-water, bicontinuous and water-in-IL microstructures. • Droplets with the size smaller than 20 nm are formed in these IL-based microemulsions. - Abstract: In this paper, micro-emulsions composed of cholinium-based ionic liquids (ILs), octylphenol ethoxylate (Triton X-100) and water were prepared. These ternary systems were found to be stable over 12 months at room temperature. Their phase behaviour was investigated by using cloud titrations, and their microstructures were characterised by means of cyclic voltammetry and electrical conductance measurements at T = 298.15 K. It was shown that the micro-emulsions exhibited IL-in-water, bi-continuous and water-in-IL microstructures. Dynamic light scattering data suggest that Triton X-100 forms micelles in water, which were swelled by the ILs added. Droplets with the size about 20 nm were formed in these IL-based micro-emulsions, and the droplet size increased with the increase of the IL concentrations. These IL-based micro-emulsions may have potential in drug delivery, chemical reactions and nanomaterial preparation as a new type of nanoreactors

MicroART : A software architecture recovery tool for maintaining microservice-based systems

NARCIS (Netherlands)

Granchelli, Giona; Cardarelli, Mario; Di Francesco, Paolo; Malavolta, Ivano; Iovino, Ludovico; Di Salle, Amleto

2017-01-01

Microservice-based systems are characterised by a multitude of small services, each running in its own process and communicating with lightweight mechanisms. The microservice architectural style strongly encourages high decoupling among microservices in order to ease their independent deployment,

Workflow-enabled distributed component-based information architecture for digital medical imaging enterprises.

Science.gov (United States)

Wong, Stephen T C; Tjandra, Donny; Wang, Huili; Shen, Weimin

2003-09-01

Few information systems today offer a flexible means to define and manage the automated part of radiology processes, which provide clinical imaging services for the entire healthcare organization. Even fewer of them provide a coherent architecture that can easily cope with heterogeneity and inevitable local adaptation of applications and can integrate clinical and administrative information to aid better clinical, operational, and business decisions. We describe an innovative enterprise architecture of image information management systems to fill the needs. Such a system is based on the interplay of production workflow management, distributed object computing, Java and Web techniques, and in-depth domain knowledge in radiology operations. Our design adapts the approach of "4+1" architectural view. In this new architecture, PACS and RIS become one while the user interaction can be automated by customized workflow process. Clinical service applications are implemented as active components. They can be reasonably substituted by applications of local adaptations and can be multiplied for fault tolerance and load balancing. Furthermore, the workflow-enabled digital radiology system would provide powerful query and statistical functions for managing resources and improving productivity. This paper will potentially lead to a new direction of image information management. We illustrate the innovative design with examples taken from an implemented system.

Motion camera based on a custom vision sensor and an FPGA architecture

Science.gov (United States)

Arias-Estrada, Miguel

1998-09-01

A digital camera for custom focal plane arrays was developed. The camera allows the test and development of analog or mixed-mode arrays for focal plane processing. The camera is used with a custom sensor for motion detection to implement a motion computation system. The custom focal plane sensor detects moving edges at the pixel level using analog VLSI techniques. The sensor communicates motion events using the event-address protocol associated to a temporal reference. In a second stage, a coprocessing architecture based on a field programmable gate array (FPGA) computes the time-of-travel between adjacent pixels. The FPGA allows rapid prototyping and flexible architecture development. Furthermore, the FPGA interfaces the sensor to a compact PC computer which is used for high level control and data communication to the local network. The camera could be used in applications such as self-guided vehicles, mobile robotics and smart surveillance systems. The programmability of the FPGA allows the exploration of further signal processing like spatial edge detection or image segmentation tasks. The article details the motion algorithm, the sensor architecture, the use of the event- address protocol for velocity vector computation and the FPGA architecture used in the motion camera system.

Cloud-Based Architectures for Auto-Scalable Web Geoportals towards the Cloudification of the GeoVITe Swiss Academic Geoportal

Directory of Open Access Journals (Sweden)

Ionuț Iosifescu-Enescu

2017-06-01

Full Text Available Cloud computing has redefined the way in which Spatial Data Infrastructures (SDI and Web geoportals are designed, managed, and maintained. The cloudification of a geoportal represents the migration of a full-stack geoportal application to an internet-based private or public cloud. This work introduces two generic and open cloud-based architectures for auto-scalable Web geoportals, illustrated with the use case of the cloudification efforts of the Swiss academic geoportal GeoVITe. The presented cloud-based architectural designs for auto-scalable Web geoportals consider the most important functional and non-functional requirements and are adapted to both public and private clouds. The availability of such generic cloud-based architectures advances the cloudification of academic SDIs and geoportals.

Photosensitive-polyimide based method for fabricating various neural electrode architectures

Directory of Open Access Journals (Sweden)

Yasuhiro X Kato

2012-06-01

Full Text Available An extensive photosensitive polyimide (PSPI-based method for designing and fabricating various neural electrode architectures was developed. The method aims to broaden the design flexibility and expand the fabrication capability for neural electrodes to improve the quality of recorded signals and integrate other functions. After characterizing PSPI’s properties for micromachining processes, we successfully designed and fabricated various neural electrodes even on a non-flat substrate using only one PSPI as an insulation material and without the time-consuming dry etching processes. The fabricated neural electrodes were an electrocorticogram electrode, a mesh intracortical electrode with a unique lattice-like mesh structure to fixate neural tissue, and a guide cannula electrode with recording microelectrodes placed on the curved surface of a guide cannula as a microdialysis probe. In vivo neural recordings using anesthetized rats demonstrated that these electrodes can be used to record neural activities repeatedly without any breakage and mechanical failures, which potentially promises stable recordings for long periods of time. These successes make us believe that this PSPI-based fabrication is a powerful method, permitting flexible design and easy optimization of electrode architectures for a variety of electrophysiological experimental research with improved neural recording performance.

Research on website construction based on website group platform of Chengdu sport institution

Science.gov (United States)

Hu, Zunyu

2018-04-01

This paper describes the necessity of website construction based on the website group of Chengdu sport institute, and discusses the technical features of the website group, Based on the website group platform architecture, the key technologies such as Web Service, AJAX, RSS and other key technologies are used to realize the construction of the website. Based on the website group platform architecture of the site, it effectively solves the information isolated island between the sites, and realizes the information sharing and resource integration. It is also more convenient that site and other sites have composed of site group integrated operation and maintenance.

Cloud-based multi-agent architecture for effective planning and scheduling of distributed manufacturing

DEFF Research Database (Denmark)

Mishra, Nishikant; Singh, Akshit; Kumari, Sushma

2016-01-01

at distinct locations are being assembled in a plant to develop the final product. In this complex scenario, manufacturing firms have to be responsive enough to cope with the fluctuating demand of customers. To accomplish it, there is a need to develop an integrated, dynamic and autonomous system....... In this article, a self-reactive cloud-based multi-agent architecture for distributed manufacturing system is developed. The proposed architecture will assist manufacturing industry to establish real-time information exchange between the autonomous agents, clients, suppliers and manufacturing unit. The mechanism...

Colin Rowe: Space as well-composed illusion

Directory of Open Access Journals (Sweden)

Christoph Schnoor

2011-12-01

Full Text Available Architectural historian Colin Rowe, although well known for his intriguing analytical writings on modern architecture, rarely examined architectural space as a scholarly subject-matter. Historians examining Rowe’s writings rarely refer to the issue of space, either. Anthony Vidler, Werner Oechslin, Alexander Caragonne and others have examined Rowe’s investigations into urban space, his analyses of formal principles in architecture, or his critical stance towards the myths of modernism, but have not singled out architectural space as subject matter. Nevertheless, this paper argues that Rowe is indeed one of the few post-war historians writing in the English language to have conveyed analyses of architectural space, particularly in the volume The Mathematics of the Ideal Villa (1976. The paper examines how Rowe understood architectural space as relevant only when not seen as ‘pure’ but ‘contaminated’ with ambiguity and active character: notions of flatness versus depth and horizontal versus vertical, as well as the overlapping of conflicting scales or whole structural or spatial systems are central for Rowe’s reading of architectural space, which is also always infused with an idea of movement. Further, the paper traces influences of Rowe’s approach beyond the obvious influence by Rudolf Wittkower to Heinrich Wölfflin’s style and method, partially conveyed through the translation of Sigfried Giedion’s writings.

An energy efficient and high speed architecture for convolution computing based on binary resistive random access memory

Science.gov (United States)

Liu, Chen; Han, Runze; Zhou, Zheng; Huang, Peng; Liu, Lifeng; Liu, Xiaoyan; Kang, Jinfeng

2018-04-01

In this work we present a novel convolution computing architecture based on metal oxide resistive random access memory (RRAM) to process the image data stored in the RRAM arrays. The proposed image storage architecture shows performances of better speed-device consumption efficiency compared with the previous kernel storage architecture. Further we improve the architecture for a high accuracy and low power computing by utilizing the binary storage and the series resistor. For a 28 × 28 image and 10 kernels with a size of 3 × 3, compared with the previous kernel storage approach, the newly proposed architecture shows excellent performances including: 1) almost 100% accuracy within 20% LRS variation and 90% HRS variation; 2) more than 67 times speed boost; 3) 71.4% energy saving.

Resistive content addressable memory based in-memory computation architecture

KAUST Repository

Salama, Khaled N.; Zidan, Mohammed A.; Kurdahi, Fadi; Eltawil, Ahmed M.

2016-01-01

Various examples are provided examples related to resistive content addressable memory (RCAM) based in-memory computation architectures. In one example, a system includes a content addressable memory (CAM) including an array of cells having a memristor based crossbar and an interconnection switch matrix having a gateless memristor array, which is coupled to an output of the CAM. In another example, a method, includes comparing activated bit values stored a key register with corresponding bit values in a row of a CAM, setting a tag bit value to indicate that the activated bit values match the corresponding bit values, and writing masked key bit values to corresponding bit locations in the row of the CAM based on the tag bit value.

Resistive content addressable memory based in-memory computation architecture

KAUST Repository

Salama, Khaled N.

2016-12-08

Various examples are provided examples related to resistive content addressable memory (RCAM) based in-memory computation architectures. In one example, a system includes a content addressable memory (CAM) including an array of cells having a memristor based crossbar and an interconnection switch matrix having a gateless memristor array, which is coupled to an output of the CAM. In another example, a method, includes comparing activated bit values stored a key register with corresponding bit values in a row of a CAM, setting a tag bit value to indicate that the activated bit values match the corresponding bit values, and writing masked key bit values to corresponding bit locations in the row of the CAM based on the tag bit value.

Can You Hear Architecture

DEFF Research Database (Denmark)

Ryhl, Camilla

2016-01-01

Taking an off set in the understanding of architectural quality being based on multisensory architecture, the paper aims to discuss the current acoustic discourse in inclusive design and its implications to the integration of inclusive design in architectural discourse and practice as well...... as the understanding of user needs. The paper further points to the need to elaborate and nuance the discourse much more, in order to assure inclusion to the many users living with a hearing impairment or, for other reasons, with a high degree of auditory sensitivity. Using the authors’ own research on inclusive...... design and architectural quality for people with a hearing disability and a newly conducted qualitative evaluation research in Denmark as well as architectural theories on multisensory aspects of architectural experiences, the paper uses examples of existing Nordic building cases to discuss the role...

An Architecture for Performance Optimization in a Collaborative Knowledge-Based Approach for  Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Juan Ramon Velasco

2011-09-01

Full Text Available Over the past few years, Intelligent Spaces (ISs have received the attention of many Wireless Sensor Network researchers. Recently, several studies have been devoted to identify their common capacities and to set up ISs over these networks. However, little attention has been paid to integrating Fuzzy Rule-Based Systems into collaborative Wireless Sensor Networks for the purpose of implementing ISs. This work presents a distributed architecture proposal for collaborative Fuzzy Rule-Based Systems embedded in Wireless Sensor Networks, which has been designed to optimize the implementation of ISs. This architecture includes the following: (a an optimized design for the inference engine; (b a visual interface; (c a module to reduce the redundancy and complexity of the knowledge bases; (d a module to evaluate the accuracy of the new knowledge base; (e a module to adapt the format of the rules to the structure used by the inference engine; and (f a communications protocol. As a real-world application of this architecture and the proposed methodologies, we show an application to the problem of modeling two plagues of the olive tree: prays (olive moth, Prays oleae Bern. and repilo (caused by the fungus Spilocaea oleagina. The results show that the architecture presented in this paper significantly decreases the consumption of resources (memory, CPU and battery without a substantial decrease in the accuracy of the inferred values.

BIM-based Modeling and Data Enrichment of Classical Architectural Buildings

Directory of Open Access Journals (Sweden)

Fabrizio Ivan Apollonio

2012-12-01

Full Text Available EnIn this paper we presented a BIM-based approach for the documentation of Architectural Heritage. Knowledge of classical architecture is first extracted from the treatises for parametric modeling in object level. Then we established a profile library based on semantic studies to sweep out different objects. Variants grow out from the parametric models by editing or regrouping parameters based on grammars. Multiple data including material, structure and real-life state are enriched with respect to different research motivations. The BIM models are expected to ease the modeling process and provide comprehensive data shared among different platforms for further simulations.ItIn questo articolo è presentata una procedura definita nell'ambito dei sistemi BIM con l'obiettivo di documentare il Patrimonio Architettonico. I dati conoscitivi relativi all'architettura classica sono, in una prima fase, ottenuti dai trattati al fine di modellare in maniera parametrica a livello di oggetti. Successivamente è stata definita una libreria di profili, basata su principi semantici, dalla quale è possibile ottenere oggetti differenti. Dati di natura differente, relativi ad esempio ai materiali, alle strutture, allo stato di fatto, sono implementati in funzione delle differenti esigenze. I modelli BIM hanno la potenzialità di facilitare le procedure di modellazione e di fornire informazioni e dati completi che possono essere condivisi tra piattaforme differenti per ulteriori simulazioni ed analisi.

Architectural design of experience based factory model for software ...

African Journals Online (AJOL)

architectural design. Automation features are incorporated in the design in which workflow system and intelligent agents are integrated, and the facilitation of cloud environment is empowered to further support the automation. Keywords: architectural design; knowledge management; experience factory; workflow;

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Turkish Architectural Works in Cyprus: “Lodges”

Directory of Open Access Journals (Sweden)

Zihni Turkan

2017-04-01

Full Text Available Architectural works from the Ottoman period in Cyprus (1571-1878, still exist in various settlements as samples of Turkish architecture on the island, and leave their mark on the historical textures.  Among the religious structures in the island belonging to the Ottoman period, lodges have a significant place with “Mevlevi, Aziziye, Kırklar, Kutup Osman, Hala Sultan, Zuhuri, Hz. Ömer and Hasan Ağa Lodges” constituting important examples to this style.  These structures were each planned as complexes and they are all composed of mosque/masjid, tomb, and residential rooms.  Lodges were built using local smooth cut stones and load-bearing wall system.  The roofs were made of domes and slanted roofs of wooden structures. Pointed arches were used as traditional bearing, covering openings.  Lodges, where restoration works are completed, are open for visit, and they preserve their place of importance as cultural heritage, transferring the traits of Ottoman period to the future.

A new efficient algorithmic-based SEU tolerant system architecture

International Nuclear Information System (INIS)

Blaquiere, Y.; Gagne, G.; Savaria, Y.; Evequoz, C.

1995-01-01

A new ABFT architecture is proposed to tolerate multiple SEU with low overheads. This architecture memorizes operands on a stack upon error detection and it corrects errors by recomputing. This allows uninterrupted input data stream to be processed without data loss

Tectonic inheritance and continental rift architecture: Numerical and analogue models of the East African Rift System.

NARCIS (Netherlands)

Corti, G.; van Wijk, J.W.; Cloetingh, S.A.P.L.; Morley, C.

2007-01-01

The western branch of the East African Rift is composed of an arcuate succession of elongate asymmetric basins, which differ in terms of interaction geometry, fault architecture and kinematics, and patterns of uplift/subsidence and erosion/sedimentation. The basins are located within Proterozoic

Neural architecture design based on extreme learning machine.

Science.gov (United States)

Bueno-Crespo, Andrés; García-Laencina, Pedro J; Sancho-Gómez, José-Luis

2013-12-01

Selection of the optimal neural architecture to solve a pattern classification problem entails to choose the relevant input units, the number of hidden neurons and its corresponding interconnection weights. This problem has been widely studied in many research works but their solutions usually involve excessive computational cost in most of the problems and they do not provide a unique solution. This paper proposes a new technique to efficiently design the MultiLayer Perceptron (MLP) architecture for classification using the Extreme Learning Machine (ELM) algorithm. The proposed method provides a high generalization capability and a unique solution for the architecture design. Moreover, the selected final network only retains those input connections that are relevant for the classification task. Experimental results show these advantages. Copyright © 2013 Elsevier Ltd. All rights reserved.

Toward a Fault Tolerant Architecture for Vital Medical-Based Wearable Computing.

Science.gov (United States)

Abdali-Mohammadi, Fardin; Bajalan, Vahid; Fathi, Abdolhossein

2015-12-01

Advancements in computers and electronic technologies have led to the emergence of a new generation of efficient small intelligent systems. The products of such technologies might include Smartphones and wearable devices, which have attracted the attention of medical applications. These products are used less in critical medical applications because of their resource constraint and failure sensitivity. This is due to the fact that without safety considerations, small-integrated hardware will endanger patients' lives. Therefore, proposing some principals is required to construct wearable systems in healthcare so that the existing concerns are dealt with. Accordingly, this paper proposes an architecture for constructing wearable systems in critical medical applications. The proposed architecture is a three-tier one, supporting data flow from body sensors to cloud. The tiers of this architecture include wearable computers, mobile computing, and mobile cloud computing. One of the features of this architecture is its high possible fault tolerance due to the nature of its components. Moreover, the required protocols are presented to coordinate the components of this architecture. Finally, the reliability of this architecture is assessed by simulating the architecture and its components, and other aspects of the proposed architecture are discussed.

Product Architecture Modularity Strategies

DEFF Research Database (Denmark)

Mikkola, Juliana Hsuan

2003-01-01

The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

System architecture for microprocessor based protection system

International Nuclear Information System (INIS)

Gallagher, J.M. Jr.; Lilly, G.M.

1976-01-01

This paper discusses the architectural design features to be employed by Westinghouse in the application of distributed digital processing techniques to the protection system. While the title of the paper makes specific reference to microprocessors, this is only one (and the newest) of the building blocks which constitutes a distributed digital processing system. The actual system structure (as realized through utilization of the various building blocks) is established through considerations of reliability, licensability, and cost. It is the intent of the paper to address these considerations licenstions as they relate to the architectural design features. (orig.) [de

A New Perspective On Architectural Sustainability

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars; Schipull Kauschen, Jan

2013-01-01

The research presented in this paper intends to establish a new perspective on architectural sustainability as an effect of good architectural quality. The intention is to show the importance of an actual architectural mindset in the design phase, and whether the conscious architectural material...... selection based on a balanced cost and aesthetics decision making will prove more sustainable and ensure better maintenance, as a result of architectural appeal, than cheaper standard houses....

A healthcare management system for Turkey based on a service-oriented architecture.

Science.gov (United States)

Herand, Deniz; Gürder, Filiz; Taşkin, Harun; Yuksel, Emre Nuri

2013-09-01

The current Turkish healthcare management system has a structure that is extremely inordinate, cumbersome and inflexible. Furthermore, this structure has no common point of view and thus has no interoperability and responds slowly to innovations. The purpose of this study is to show that using which methods can the Turkish healthcare management system provide a structure that could be more modern, more flexible and more quick to respond to innovations and changes taking advantage of the benefits given by a service-oriented architecture (SOA). In this paper, the Turkish healthcare management system is chosen to be examined since Turkey is considered as one of the Third World countries and the information architecture of the existing healthcare management system of Turkey has not yet been configured with SOA, which is a contemporary innovative approach and should provide the base architecture of the new solution. The innovation of this study is the symbiosis of two main integration approaches, SOA and Health Level 7 (HL7), for integrating divergent healthcare information systems. A model is developed which is based on SOA and enables obtaining a healthcare management system having the SSF standards (HSSP Service Specification Framework) developed by the framework of the HSSP (Healthcare Services Specification Project) under the leadership of HL7 and the Object Management Group.

A top-down manner-based DCNN architecture for semantic image segmentation.

Directory of Open Access Journals (Sweden)

Kai Qiao

Full Text Available Given their powerful feature representation for recognition, deep convolutional neural networks (DCNNs have been driving rapid advances in high-level computer vision tasks. However, their performance in semantic image segmentation is still not satisfactory. Based on the analysis of visual mechanism, we conclude that DCNNs in a bottom-up manner are not enough, because semantic image segmentation task requires not only recognition but also visual attention capability. In the study, superpixels containing visual attention information are introduced in a top-down manner, and an extensible architecture is proposed to improve the segmentation results of current DCNN-based methods. We employ the current state-of-the-art fully convolutional network (FCN and FCN with conditional random field (DeepLab-CRF as baselines to validate our architecture. Experimental results of the PASCAL VOC segmentation task qualitatively show that coarse edges and error segmentation results are well improved. We also quantitatively obtain about 2%-3% intersection over union (IOU accuracy improvement on the PASCAL VOC 2011 and 2012 test sets.

DSP Architecture Design Essentials

CERN Document Server

Marković, Dejan

2012-01-01

In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.

Framework Architecture Enabling an Agent-Based Inter-Company Integration with XML

Directory of Open Access Journals (Sweden)

Klement Fellner

2000-11-01

Full Text Available More and more cooperating companies utilize the World Wide Web (WWW to federate and further integrate their heterogeneous business application systems. At the same time, innovative business strategies, like virtual organizations, supply chain management or one-to-one marketing as well as trendsetting competitive strategies, like mass customisation are realisable. Both, the necessary integration and the innovative concepts are demanding software supporting automation of communication as well as coordination across system boundaries. In this paper, we describe a framework architecture for intercompany integration of business processes based on commonly accepted and (partially standardized concepts and techniques. Further on, it is shown how the framework architecture helps to automate procurement processes and how a cost-saving black-box re-use is achieved following a component oriented implementation paradigm.

An Architecture for Automated Fire Detection Early Warning System Based on Geoprocessing Service Composition

Science.gov (United States)

Samadzadegan, F.; Saber, M.; Zahmatkesh, H.; Joze Ghazi Khanlou, H.

2013-09-01

Rapidly discovering, sharing, integrating and applying geospatial information are key issues in the domain of emergency response and disaster management. Due to the distributed nature of data and processing resources in disaster management, utilizing a Service Oriented Architecture (SOA) to take advantages of workflow of services provides an efficient, flexible and reliable implementations to encounter different hazardous situation. The implementation specification of the Web Processing Service (WPS) has guided geospatial data processing in a Service Oriented Architecture (SOA) platform to become a widely accepted solution for processing remotely sensed data on the web. This paper presents an architecture design based on OGC web services for automated workflow for acquisition, processing remotely sensed data, detecting fire and sending notifications to the authorities. A basic architecture and its building blocks for an automated fire detection early warning system are represented using web-based processing of remote sensing imageries utilizing MODIS data. A composition of WPS processes is proposed as a WPS service to extract fire events from MODIS data. Subsequently, the paper highlights the role of WPS as a middleware interface in the domain of geospatial web service technology that can be used to invoke a large variety of geoprocessing operations and chaining of other web services as an engine of composition. The applicability of proposed architecture by a real world fire event detection and notification use case is evaluated. A GeoPortal client with open-source software was developed to manage data, metadata, processes, and authorities. Investigating feasibility and benefits of proposed framework shows that this framework can be used for wide area of geospatial applications specially disaster management and environmental monitoring.

AN ARCHITECTURE FOR AUTOMATED FIRE DETECTION EARLY WARNING SYSTEM BASED ON GEOPROCESSING SERVICE COMPOSITION

Directory of Open Access Journals (Sweden)

F. Samadzadegan

2013-09-01

Full Text Available Rapidly discovering, sharing, integrating and applying geospatial information are key issues in the domain of emergency response and disaster management. Due to the distributed nature of data and processing resources in disaster management, utilizing a Service Oriented Architecture (SOA to take advantages of workflow of services provides an efficient, flexible and reliable implementations to encounter different hazardous situation. The implementation specification of the Web Processing Service (WPS has guided geospatial data processing in a Service Oriented Architecture (SOA platform to become a widely accepted solution for processing remotely sensed data on the web. This paper presents an architecture design based on OGC web services for automated workflow for acquisition, processing remotely sensed data, detecting fire and sending notifications to the authorities. A basic architecture and its building blocks for an automated fire detection early warning system are represented using web-based processing of remote sensing imageries utilizing MODIS data. A composition of WPS processes is proposed as a WPS service to extract fire events from MODIS data. Subsequently, the paper highlights the role of WPS as a middleware interface in the domain of geospatial web service technology that can be used to invoke a large variety of geoprocessing operations and chaining of other web services as an engine of composition. The applicability of proposed architecture by a real world fire event detection and notification use case is evaluated. A GeoPortal client with open-source software was developed to manage data, metadata, processes, and authorities. Investigating feasibility and benefits of proposed framework shows that this framework can be used for wide area of geospatial applications specially disaster management and environmental monitoring.

Confabulation Based Real-time Anomaly Detection for Wide-area Surveillance Using Heterogeneous High Performance Computing Architecture

Science.gov (United States)

2015-06-01

CONFABULATION BASED REAL-TIME ANOMALY DETECTION FOR WIDE-AREA SURVEILLANCE USING HETEROGENEOUS HIGH PERFORMANCE COMPUTING ARCHITECTURE SYRACUSE...DETECTION FOR WIDE-AREA SURVEILLANCE USING HETEROGENEOUS HIGH PERFORMANCE COMPUTING ARCHITECTURE 5a. CONTRACT NUMBER FA8750-12-1-0251 5b. GRANT...processors including graphic processor units (GPUs) and Intel Xeon Phi processors. Experimental results showed significant speedups, which can enable

An Autonomous Mobile Agent-Based Distributed Learning Architecture-A Proposal and Analytical Analysis

Directory of Open Access Journals (Sweden)

I. Ahmed M. J. SADIIG

2005-10-01

Full Text Available An Autonomous Mobile Agent-Based Distributed Learning Architecture-A Proposal and Analytical Analysis Dr. I. Ahmed M. J. SADIIG Department of Electrical & Computer EngineeringInternational Islamic University GombakKuala Lumpur-MALAYSIA ABSTRACT The traditional learning paradigm invoving face-to-face interaction with students is shifting to highly data-intensive electronic learning with the advances in Information and Communication Technology. An important component of the e-learning process is the delivery of the learning contents to their intended audience over a network. A distributed learning system is dependent on the network for the efficient delivery of its contents to the user. However, as the demand of information provision and utilization increases on the Internet, the current information service provision and utilization methods are becoming increasingly inefficient. Although new technologies have been employed for efficient learning methodologies within the context of an e-learning environment, the overall efficiency of the learning system is dependent on the mode of distribution and utilization of its learning contents. It is therefore imperative to employ new techniques to meet the service demands of current and future e-learning systems. In this paper, an architecture based on autonomous mobile agents creating a Faded Information Field is proposed. Unlike the centralized information distribution in a conventional e-learning system, the information is decentralized in the proposed architecture resulting in increased efficiency of the overall system for distribution and utilization of system learning contents efficiently and fairly. This architecture holds the potential to address the heterogeneous user requirements as well as the changing conditions of the underlying network.

SpaceWire- Based Control System Architecture for the Lightweight Advanced Robotic Arm Demonstrator [LARAD

Science.gov (United States)

Rucinski, Marek; Coates, Adam; Montano, Giuseppe; Allouis, Elie; Jameux, David

2015-09-01

The Lightweight Advanced Robotic Arm Demonstrator (LARAD) is a state-of-the-art, two-meter long robotic arm for planetary surface exploration currently being developed by a UK consortium led by Airbus Defence and Space Ltd under contract to the UK Space Agency (CREST-2 programme). LARAD has a modular design, which allows for experimentation with different electronics and control software. The control system architecture includes the on-board computer, control software and firmware, and the communication infrastructure (e.g. data links, switches) connecting on-board computer(s), sensors, actuators and the end-effector. The purpose of the control system is to operate the arm according to pre-defined performance requirements, monitoring its behaviour in real-time and performing safing/recovery actions in case of faults. This paper reports on the results of a recent study about the feasibility of the development and integration of a novel control system architecture for LARAD fully based on the SpaceWire protocol. The current control system architecture is based on the combination of two communication protocols, Ethernet and CAN. The new SpaceWire-based control system will allow for improved monitoring and telecommanding performance thanks to higher communication data rate, allowing for the adoption of advanced control schemes, potentially based on multiple vision sensors, and for the handling of sophisticated end-effectors that require fine control, such as science payloads or robotic hands.

An Emotion Aware Task Automation Architecture Based on Semantic Technologies for Smart Offices

Science.gov (United States)

2018-01-01

The evolution of the Internet of Things leads to new opportunities for the contemporary notion of smart offices, where employees can benefit from automation to maximize their productivity and performance. However, although extensive research has been dedicated to analyze the impact of workers’ emotions on their job performance, there is still a lack of pervasive environments that take into account emotional behaviour. In addition, integrating new components in smart environments is not straightforward. To face these challenges, this article proposes an architecture for emotion aware automation platforms based on semantic event-driven rules to automate the adaptation of the workplace to the employee’s needs. The main contributions of this paper are: (i) the design of an emotion aware automation platform architecture for smart offices; (ii) the semantic modelling of the system; and (iii) the implementation and evaluation of the proposed architecture in a real scenario. PMID:29748468

An Emotion Aware Task Automation Architecture Based on Semantic Technologies for Smart Offices.

Science.gov (United States)

Muñoz, Sergio; Araque, Oscar; Sánchez-Rada, J Fernando; Iglesias, Carlos A

2018-05-10

The evolution of the Internet of Things leads to new opportunities for the contemporary notion of smart offices, where employees can benefit from automation to maximize their productivity and performance. However, although extensive research has been dedicated to analyze the impact of workers’ emotions on their job performance, there is still a lack of pervasive environments that take into account emotional behaviour. In addition, integrating new components in smart environments is not straightforward. To face these challenges, this article proposes an architecture for emotion aware automation platforms based on semantic event-driven rules to automate the adaptation of the workplace to the employee’s needs. The main contributions of this paper are: (i) the design of an emotion aware automation platform architecture for smart offices; (ii) the semantic modelling of the system; and (iii) the implementation and evaluation of the proposed architecture in a real scenario.

An Emotion Aware Task Automation Architecture Based on Semantic Technologies for Smart Offices

Directory of Open Access Journals (Sweden)

Sergio Muñoz

2018-05-01

Full Text Available The evolution of the Internet of Things leads to new opportunities for the contemporary notion of smart offices, where employees can benefit from automation to maximize their productivity and performance. However, although extensive research has been dedicated to analyze the impact of workers’ emotions on their job performance, there is still a lack of pervasive environments that take into account emotional behaviour. In addition, integrating new components in smart environments is not straightforward. To face these challenges, this article proposes an architecture for emotion aware automation platforms based on semantic event-driven rules to automate the adaptation of the workplace to the employee’s needs. The main contributions of this paper are: (i the design of an emotion aware automation platform architecture for smart offices; (ii the semantic modelling of the system; and (iii the implementation and evaluation of the proposed architecture in a real scenario.

Information Architecture of Web-Based Interventions to Improve Health Outcomes: Systematic Review.

Science.gov (United States)

Pugatch, Jillian; Grenen, Emily; Surla, Stacy; Schwarz, Mary; Cole-Lewis, Heather

2018-03-21

health outcomes, behavioral outcomes, or website engagement. One publication studied the isolated impact of information architecture on outcomes of interest (ie, website use and engagement; health-related knowledge, attitudes, and beliefs; and health behaviors), while the other two publications studied the impact of information architecture, website features (eg, interactivity, email prompts, and forums), and tailored content on these outcomes. The paper that investigated IA exclusively found that a tunnel IA improved site engagement and behavior knowledge, but it decreased users' perceived efficiency. The first study that did not isolate IA found that the enhanced site condition improved site usage but not the amount of content viewed. The second study that did not isolate IA found that a tailored site condition improved site usage, behavior knowledge, and some behavior outcomes. No clear conclusion can be made about the relationship between IA and health outcomes, given limited evidence in the peer-reviewed literature connecting IA to behavioral outcomes and website engagement. Only one study reviewed solely manipulated IA, and we therefore recommend improving the scientific evidence base such that additional empirical studies investigate the impact of IA in isolation. Moreover, information from the gray literature and expert opinion might be identified and added to the evidence base, in order to lay the groundwork for hypothesis generation to improve empirical evidence on information architecture and health and behavior outcomes. ©Jillian Pugatch, Emily Grenen, Stacy Surla, Mary Schwarz, Heather Cole-Lewis. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 21.03.2018.

Architectural Analysis of Systems Based on the Publisher-Subscriber Style

Science.gov (United States)

Ganesun, Dharmalingam; Lindvall, Mikael; Ruley, Lamont; Wiegand, Robert; Ly, Vuong; Tsui, Tina

2010-01-01

Architectural styles impose constraints on both the topology and the interaction behavior of involved parties. In this paper, we propose an approach for analyzing implemented systems based on the publisher-subscriber architectural style. From the style definition, we derive a set of reusable questions and show that some of them can be answered statically whereas others are best answered using dynamic analysis. The paper explains how the results of static analysis can be used to orchestrate dynamic analysis. The proposed method was successfully applied on the NASA's Goddard Mission Services Evolution Center (GMSEC) software product line. The results show that the GMSEC has a) a novel reusable vendor-independent middleware abstraction layer that allows the NASA's missions to configure the middleware of interest without changing the publishers' or subscribers' source code, and b) some high priority bugs due to behavioral discrepancies, which were eluded during testing and code reviews, among different implementations of the same APIs for different vendors.

Artistic and Engineering Design of Platform-Based Production Systems: A Study of Swedish Architectural Practice

Directory of Open Access Journals (Sweden)

Gustav Jansson

2018-02-01

Full Text Available Research on platform-based production systems for house-building has focused on production and manufacturing issues. The aim of this research is to explore how the architectural design process contributes to the industrialised house-building industry from the perspective of creative design work. It also aims to describe how constraints affect architectural design work in the engineer-to-order context, when using platform-based production systems. Architects with experience in using platform-based building systems with different degrees of constraints were interviewed regarding creative aspects of the design work. The interviews, together with documents relating to platform constraints, were then analysed from the perspective of artistic and engineering design theories. The results show the benefits and issues of using platform constraints, both with prefabrication of volumetric modules, as well as prefabricated slab and wall elements. The study highlights a major research gap by describing how architectural work, from both the creative artistic and engineering design perspectives, is affected by constraints in the building platform: (1 the architectural design work goes through a series of divergent and convergent processes where the divergent processes are explorative and the convergent processes are solution-oriented; and (2, there is a trade-off between creativity and efficiency in the design work. Open parameters for layout design are key to architectural creativity, while predefinition supports efficiency. The results also provide an understanding of the potential for creativity in artistic and engineering work tasks through different phases in design, and how they are related to constraints in the platform. The main limitation of the research is the number of interviewed architects who had different background experiences of working with different types of platform constraints. More studies are needed to confirm the observations and to

Architecture for the senses

DEFF Research Database (Denmark)

Ryhl, Camilla

2009-01-01

Accommodating sensory disabilities in architectural design requires specific design considerations. These are different from the ones included by the existing design concept 'accessibility', which primarily accommodates physical disabilites. Hence a new design concept 'sensory accessbility......' is presented as a parallel and complementary concept to the existing one. Sensory accessiblity accommodates sensory disabilities and describes architectural design requirements needed to ensure access to to the sensory experiences and architectural quality of a given space. The article is based on research...

FPSoC-Based Architecture for a Fast Motion Estimation Algorithm in H.264/AVC

Directory of Open Access Journals (Sweden)

Obianuju Ndili

2009-01-01

Full Text Available There is an increasing need for high quality video on low power, portable devices. Possible target applications range from entertainment and personal communications to security and health care. While H.264/AVC answers the need for high quality video at lower bit rates, it is significantly more complex than previous coding standards and thus results in greater power consumption in practical implementations. In particular, motion estimation (ME, in H.264/AVC consumes the largest power in an H.264/AVC encoder. It is therefore critical to speed-up integer ME in H.264/AVC via fast motion estimation (FME algorithms and hardware acceleration. In this paper, we present our hardware oriented modifications to a hybrid FME algorithm, our architecture based on the modified algorithm, and our implementation and prototype on a PowerPC-based Field Programmable System on Chip (FPSoC. Our results show that the modified hybrid FME algorithm on average, outperforms previous state-of-the-art FME algorithms, while its losses when compared with FSME, in terms of PSNR performance and computation time, are insignificant. We show that although our implementation platform is FPGA-based, our implementation results compare favourably with previous architectures implemented on ASICs. Finally we also show an improvement over some existing architectures implemented on FPGAs.

A Conceptual Architecture for Adaptive Human-Computer Interface of a PT Operation Platform Based on Context-Awareness

Directory of Open Access Journals (Sweden)

Qing Xue

2014-01-01

Full Text Available We present a conceptual architecture for adaptive human-computer interface of a PT operation platform based on context-awareness. This architecture will form the basis of design for such an interface. This paper describes components, key technologies, and working principles of the architecture. The critical contents covered context information modeling, processing, relationship establishing between contexts and interface design knowledge by use of adaptive knowledge reasoning, and visualization implementing of adaptive interface with the aid of interface tools technology.

Agent Architectures for Compliance

Science.gov (United States)

Burgemeestre, Brigitte; Hulstijn, Joris; Tan, Yao-Hua

A Normative Multi-Agent System consists of autonomous agents who must comply with social norms. Different kinds of norms make different assumptions about the cognitive architecture of the agents. For example, a principle-based norm assumes that agents can reflect upon the consequences of their actions; a rule-based formulation only assumes that agents can avoid violations. In this paper we present several cognitive agent architectures for self-monitoring and compliance. We show how different assumptions about the cognitive architecture lead to different information needs when assessing compliance. The approach is validated with a case study of horizontal monitoring, an approach to corporate tax auditing recently introduced by the Dutch Customs and Tax Authority.

Applying representational state transfer (REST) architecture to archetype-based electronic health record systems

Science.gov (United States)

2013-01-01

Background The openEHR project and the closely related ISO 13606 standard have defined structures supporting the content of Electronic Health Records (EHRs). However, there is not yet any finalized openEHR specification of a service interface to aid application developers in creating, accessing, and storing the EHR content. The aim of this paper is to explore how the Representational State Transfer (REST) architectural style can be used as a basis for a platform-independent, HTTP-based openEHR service interface. Associated benefits and tradeoffs of such a design are also explored. Results The main contribution is the formalization of the openEHR storage, retrieval, and version-handling semantics and related services into an implementable HTTP-based service interface. The modular design makes it possible to prototype, test, replicate, distribute, cache, and load-balance the system using ordinary web technology. Other contributions are approaches to query and retrieval of the EHR content that takes caching, logging, and distribution into account. Triggering on EHR change events is also explored. A final contribution is an open source openEHR implementation using the above-mentioned approaches to create LiU EEE, an educational EHR environment intended to help newcomers and developers experiment with and learn about the archetype-based EHR approach and enable rapid prototyping. Conclusions Using REST addressed many architectural concerns in a successful way, but an additional messaging component was needed to address some architectural aspects. Many of our approaches are likely of value to other archetype-based EHR implementations and may contribute to associated service model specifications. PMID:23656624

Embedded Active Vision System Based on an FPGA Architecture

Directory of Open Access Journals (Sweden)

Chalimbaud Pierre

2007-01-01

Full Text Available In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks, inspired by biological vision systems. For this reason, we propose an original approach based on a system on programmable chip implemented in an FPGA connected to a CMOS imager and an inertial set. With such a structure based on reprogrammable devices, this system admits a high degree of versatility and allows the implementation of parallel image processing algorithms.

Embedded Active Vision System Based on an FPGA Architecture

Directory of Open Access Journals (Sweden)

Pierre Chalimbaud

2006-12-01

Full Text Available In computer vision and more particularly in vision processing, the impressive evolution of algorithms and the emergence of new techniques dramatically increase algorithm complexity. In this paper, a novel FPGA-based architecture dedicated to active vision (and more precisely early vision is proposed. Active vision appears as an alternative approach to deal with artificial vision problems. The central idea is to take into account the perceptual aspects of visual tasks, inspired by biological vision systems. For this reason, we propose an original approach based on a system on programmable chip implemented in an FPGA connected to a CMOS imager and an inertial set. With such a structure based on reprogrammable devices, this system admits a high degree of versatility and allows the implementation of parallel image processing algorithms.

A knowledge base architecture for distributed knowledge agents

Science.gov (United States)

Riedesel, Joel; Walls, Bryan

1990-01-01

A tuple space based object oriented model for knowledge base representation and interpretation is presented. An architecture for managing distributed knowledge agents is then implemented within the model. The general model is based upon a database implementation of a tuple space. Objects are then defined as an additional layer upon the database. The tuple space may or may not be distributed depending upon the database implementation. A language for representing knowledge and inference strategy is defined whose implementation takes advantage of the tuple space. The general model may then be instantiated in many different forms, each of which may be a distinct knowledge agent. Knowledge agents may communicate using tuple space mechanisms as in the LINDA model as well as using more well known message passing mechanisms. An implementation of the model is presented describing strategies used to keep inference tractable without giving up expressivity. An example applied to a power management and distribution network for Space Station Freedom is given.

Component-based architecting for distributed real-time systems : how to achieve composability?

NARCIS (Netherlands)

Hammer, D.K.; Aksit, M.

2001-01-01

In systems- and software architecting, architecture can be viewed as a highlevel design that supports the construction of ICT-systems. Starting from a list of general requirements, the first part of this chapter gives an overview of the dimensions of such a design. In addition, the various, often

Web Service Architecture for e-Learning

Directory of Open Access Journals (Sweden)

Xiaohong Qiu

2005-10-01

Full Text Available Message-based Web Service architecture provides a unified approach to applications and Web Services that incorporates the flexibility of messaging and distributed components. We propose SMMV and MMMV collaboration as the general architecture of collaboration based on a Web service model, which accommodates both instructor-led learning and participatory learning. This approach derives from our message-based Model-View-Controller (M-MVC architecture of Web applications, comprises an event-driven Publish/Subscribe scheme, and provides effective collaboration with high interactivity of rich Web content for diverse clients over heterogeneous network environments.

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

A Cloud-based Infrastructure and Architecture for Environmental System Research

Science.gov (United States)

Wang, D.; Wei, Y.; Shankar, M.; Quigley, J.; Wilson, B. E.

2016-12-01

The present availability of high-capacity networks, low-cost computers and storage devices, and the widespread adoption of hardware virtualization and service-oriented architecture provide a great opportunity to enable data and computing infrastructure sharing between closely related research activities. By taking advantage of these approaches, along with the world-class high computing and data infrastructure located at Oak Ridge National Laboratory, a cloud-based infrastructure and architecture has been developed to efficiently deliver essential data and informatics service and utilities to the environmental system research community, and will provide unique capabilities that allows terrestrial ecosystem research projects to share their software utilities (tools), data and even data submission workflow in a straightforward fashion. The infrastructure will minimize large disruptions from current project-based data submission workflows for better acceptances from existing projects, since many ecosystem research projects already have their own requirements or preferences for data submission and collection. The infrastructure will eliminate scalability problems with current project silos by provide unified data services and infrastructure. The Infrastructure consists of two key components (1) a collection of configurable virtual computing environments and user management systems that expedite data submission and collection from environmental system research community, and (2) scalable data management services and system, originated and development by ORNL data centers.

REAL-TIME VIDEO SCALING BASED ON CONVOLUTION NEURAL NETWORK ARCHITECTURE

OpenAIRE

S Safinaz; A V Ravi Kumar

2017-01-01

In recent years, video super resolution techniques becomes mandatory requirements to get high resolution videos. Many super resolution techniques researched but still video super resolution or scaling is a vital challenge. In this paper, we have presented a real-time video scaling based on convolution neural network architecture to eliminate the blurriness in the images and video frames and to provide better reconstruction quality while scaling of large datasets from lower resolution frames t...

Architectural Engineers

DEFF Research Database (Denmark)

Petersen, Rikke Premer

engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

Aesthetics of sustainable architecture

NARCIS (Netherlands)

Lee, S.; Hill, G.; Sauerbruch, M.; Hutton, L.; Knowles, R.; Bothwell, K.; Brennan, J.; Jauslin, D.; Holzheu, H.; AlSayyad, N.; Arboleda, G.; Bharne, V.; Røstvik, H.; Kuma, K.; Sunikka-Blank, M.; Glaser, M.; Pero, E.; Sjkonsberg, M.; Teuffel, P.; Mangone, G.; Finocchiaro, L.; Hestnes, A.; Briggs, D.; Frampton, K.; Lee, S.

2011-01-01

The purpose of this book is to reveal, explore and further the debate on the aesthetic potentials of sustainable architecture and its practice. This book opens a new area of scholarship and discourse in the design and production of sustainable architecture, one that is based in aesthetics. The

Silicon CMOS architecture for a spin-based quantum computer.

Science.gov (United States)

Veldhorst, M; Eenink, H G J; Yang, C H; Dzurak, A S

2017-12-15

Recent advances in quantum error correction codes for fault-tolerant quantum computing and physical realizations of high-fidelity qubits in multiple platforms give promise for the construction of a quantum computer based on millions of interacting qubits. However, the classical-quantum interface remains a nascent field of exploration. Here, we propose an architecture for a silicon-based quantum computer processor based on complementary metal-oxide-semiconductor (CMOS) technology. We show how a transistor-based control circuit together with charge-storage electrodes can be used to operate a dense and scalable two-dimensional qubit system. The qubits are defined by the spin state of a single electron confined in quantum dots, coupled via exchange interactions, controlled using a microwave cavity, and measured via gate-based dispersive readout. We implement a spin qubit surface code, showing the prospects for universal quantum computation. We discuss the challenges and focus areas that need to be addressed, providing a path for large-scale quantum computing.

$H_2$ optimal controllers with observer based architecture for continuous-time systems : separation principle

NARCIS (Netherlands)

Saberi, A.; Sannuti, P.; Stoorvogel, A.A.

1994-01-01

For a general H2 optimal control problem, at first all Hz optimal measurement feedback controllers are characterized and parameterized, and then attention is focused on controllers with observer based architecture. Both full order as well as reduced order observer based H2 optimal controllers are

An Energy-Efficient and High-Quality Video Transmission Architecture in Wireless Video-Based Sensor Networks

Directory of Open Access Journals (Sweden)

Yasaman Samei

2008-08-01

Full Text Available Technological progress in the fields of Micro Electro-Mechanical Systems (MEMS and wireless communications and also the availability of CMOS cameras, microphones and small-scale array sensors, which may ubiquitously capture multimedia content from the field, have fostered the development of low-cost limited resources Wireless Video-based Sensor Networks (WVSN. With regards to the constraints of videobased sensor nodes and wireless sensor networks, a supporting video stream is not easy to implement with the present sensor network protocols. In this paper, a thorough architecture is presented for video transmission over WVSN called Energy-efficient and high-Quality Video transmission Architecture (EQV-Architecture. This architecture influences three layers of communication protocol stack and considers wireless video sensor nodes constraints like limited process and energy resources while video quality is preserved in the receiver side. Application, transport, and network layers are the layers in which the compression protocol, transport protocol, and routing protocol are proposed respectively, also a dropping scheme is presented in network layer. Simulation results over various environments with dissimilar conditions revealed the effectiveness of the architecture in improving the lifetime of the network as well as preserving the video quality.

An Energy-Efficient and High-Quality Video Transmission Architecture in Wireless Video-Based Sensor Networks.

Science.gov (United States)

Aghdasi, Hadi S; Abbaspour, Maghsoud; Moghadam, Mohsen Ebrahimi; Samei, Yasaman

2008-08-04

Technological progress in the fields of Micro Electro-Mechanical Systems (MEMS) and wireless communications and also the availability of CMOS cameras, microphones and small-scale array sensors, which may ubiquitously capture multimedia content from the field, have fostered the development of low-cost limited resources Wireless Video-based Sensor Networks (WVSN). With regards to the constraints of videobased sensor nodes and wireless sensor networks, a supporting video stream is not easy to implement with the present sensor network protocols. In this paper, a thorough architecture is presented for video transmission over WVSN called Energy-efficient and high-Quality Video transmission Architecture (EQV-Architecture). This architecture influences three layers of communication protocol stack and considers wireless video sensor nodes constraints like limited process and energy resources while video quality is preserved in the receiver side. Application, transport, and network layers are the layers in which the compression protocol, transport protocol, and routing protocol are proposed respectively, also a dropping scheme is presented in network layer. Simulation results over various environments with dissimilar conditions revealed the effectiveness of the architecture in improving the lifetime of the network as well as preserving the video quality.

Sustainable architecture approach in designing residential ...

African Journals Online (AJOL)

Sustainable architecture has been shaped with vernacular materials based on the vernacular architecture according to climatic conditions, saving energy and responding to needs and social and cultural conditions. In cold region architecture, the buildings are constructed as steps on the hills in the direction of sun and ...

ARCHITECT: The architecture-based technology evaluation and capability tradeoff method

Science.gov (United States)

Griendling, Kelly A.

The use of architectures for the design, development, and documentation of system-of-systems engineering has become a common practice in recent years. This practice became mandatory in the defense industry in 2004 when the Department of Defense Architecture Framework (DoDAF) Promulgation Memo mandated that all Department of Defense (DoD) architectures must be DoDAF compliant. Despite this mandate, there has been significant confusion and a lack of consistency in the creation and the use of the architecture products. Products are typically created as static documents used for communication and documentation purposes that are difficult to change and do not support engineering design activities and acquisition decision making. At the same time, acquisition guidance has been recently reformed to move from the bottom-up approach of the Requirements Generation System (RGS) to the top-down approach mandated by the Joint Capabilities Integration and Devel- opment System (JCIDS), which requires the use of DoDAF to support acquisition. Defense agencies have had difficulty adjusting to this new policy, and are struggling to determine how to meet new acquisition requirements. This research has developed the Architecture-based Technology Evaluation and Capability Tradeoff (ARCHITECT) Methodology to respond to these challenges and address concerns raised about the defense acquisition process, particularly the time required to implement parts of the process, the need to evaluate solutions across capability and mission areas, and the need to use a rigorous, traceable, repeatable method that utilizes modeling and simulation to better substantiate early-phase acquisition decisions. The objective is to create a capability-based systems engineering methodology for the early phases of design and acquisition (specifically Pre-Milestone A activities) which improves agility in defense acquisition by (1) streamlining the development of key elements of JCIDS and DoDAF, (2) moving the

Agent Based Framework Architecture for Supporting Content Adaptation for Mobile Government

Directory of Open Access Journals (Sweden)

Hasan Omar Al-Sakran

2013-01-01

Full Text Available Rapid spread of smart mobile technology that supports internet access is transforming the way governments provide services to their citizens. Mobile devices have different capabilities based on the manufacturers and models. This paper proposes a new framework for adapting the content of M-government services using mobile agent technology. The framework is based on a mediation architecture that uses multiple mobile agents and XML as semi-structure mediation language. The flexibility of the mediation and XML provide an adaptive environment to stream data based on the capabilities of the device sending the query to the system.

Architectural Qualities in Passive Houses

DEFF Research Database (Denmark)

Brunsgaard, Camilla

2012-01-01

that it is possible to build this type of houses, but the knowledge and discussion about the architectural quality in the buildings is hardly present. The question is if the strategies for optimising energy use and indoor environment collide with the architectural qualities of buildings. This paper brings forth...... this discussion based in literature and four case studies. The paper highlights cases on how passive strategies for optimising energy use and indoor environment affect, restrict, inspire or create possibilities for the architectural expression and there through the architectural quality of the building....

Knowledge and Architectural Practice

DEFF Research Database (Denmark)

Verbeke, Johan

2017-01-01

of the level of research methods and will explain that the research methods and processes in creative practice research are very similar to grounded theory which is an established research method in the social sciences. Finally, an argument will be made for a more explicit research attitude in architectural......This paper focuses on the specific knowledge residing in architectural practice. It is based on the research of 35 PhD fellows in the ADAPT-r (Architecture, Design and Art Practice Training-research) project. The ADAPT-r project innovates architectural research in combining expertise from academia...... and from practice in order to highlight and extract the specific kind of knowledge which resides and is developed in architectural practice (creative practice research). The paper will discuss three ongoing and completed PhD projects and focusses on the outcomes and their contribution to the field...

Dynamic logic architecture based on piecewise-linear systems

International Nuclear Information System (INIS)

Peng Haipeng; Liu Fei; Li Lixiang; Yang Yixian; Wang Xue

2010-01-01

This Letter explores piecewise-linear systems to construct dynamic logic architecture. The proposed schemes can discriminate the two input signals and obtain 16 kinds of logic operations by different combinations of parameters and conditions for determining the output. Each logic cell performs more flexibly, that makes it possible to achieve complex logic operations more simply and construct computing architecture with less logic cells. We also analyze the various performances of our schemes under different conditions and the characteristics of these schemes.

Architectural Engineering to Super-Light Structures

DEFF Research Database (Denmark)

Castberg, Niels Andreas

The increasing global urbanisation creates a great demand for new buildings. In the aim to honour this, a new structural system, offering flexibility and variation at no extra cost appears beneficial. Super-Light Structures constitute such a system. This PhD thesis examines Super-Light Structures...... with architectural engineering as a starting point. The thesis is based on a two stringed hypothesis: Architectural engineering gives rise to better architecture and Super-Light Structures support and enables a static, challenging architecture. The aim of the thesis is to clarify architectural engineering's impact...... on the work process between architects and engineers in the design development. Using architectural engineering, Super-Light Structures are examined in an architectural context, and it is explained how digital tools can support architectural engineering and design of Super-Light Structures. The experiences...

Software Architectures – Present and Visions

Directory of Open Access Journals (Sweden)

Catalin STRIMBEI

2015-01-01

Full Text Available Nowadays, architectural software systems are increasingly important because they can determine the success of the entire system. In this article we intend to rigorously analyze the most common types of systems architectures and present a personal opinion about the specifics of the university architecture. After analyzing monolithic architectures, SOA architecture and those of the micro- based services, we present specific issues and specific criteria for the university software systems. Each type of architecture is rundown and analyzed according to specific academic challenges. During the analysis, we took into account the factors that determine the success of each architecture and also the common causes of failure. At the end of the article, we objectively decide which architecture is best suited to be implemented in the university area.

Microservices as an Evolutionary Architecture of Component-Based Development: A Think-aloud Study

OpenAIRE

Parizi, Reza M.

2018-01-01

Microservices become a fast growing and popular architectural style based on service-oriented development. One of the major advantages using component-based approaches is to support reuse. In this paper, we present a study of microservices and how these systems are related to the traditional abstract models of component-based systems. This research focuses on the core properties of microservices including their scalability, availability and resilience, consistency, coupling and cohesion, and ...

Study on the contract characteristics of Internet architecture

Science.gov (United States)

Fu, Chuan; Zhang, Guoqing; Yang, Jing; Liu, Xiaona

2011-11-01

The importance of Internet architecture goes beyond the technical aspects. The architecture of Internet has a profound influence on the Internet-based economy in term of how the profits are shared by different market participants (Internet Server Provider, Internet Content Provider), since it is the physical foundation upon which the profit-sharing contracts are derived. In order to facilitate the continuing growth of the Internet, it is necessary to systematically study factors that curtail the Internet-based economy including the existing Internet architecture. In this paper, we used transaction cost economics and contract economics as new tools to analyse the contracts derived from the current Internet architecture. This study sheds light on how the macro characteristics of Internet architecture effect the microeconomical decisions of market participants. Based on the existing Internet architecture, we discuss the possibility of promoting Internet-based economy by encouraging user to connect their private stub network to the Internet and giving the user more right of self-governing.

Urban Sustainability through Public Architecture

Directory of Open Access Journals (Sweden)

Soomi Kim

2018-04-01

Full Text Available As the sustainability of contemporary cities has gained emphasis, interest in architecture has increased, due to its social and public responsibility. Since sustainability is linked to public values, research on sustainable public spaces is an important way to secure sustainability in cities. Based on this, we analyzed the sustainability of European cities by examining the design methods of public architecture according to the region. The aim of the study is to derive architectural methodology corresponding to local characteristics, and to suggest issues to consider in public architecture design to promote urban sustainability based on this. First, regarding the environmental aspect, it can be observed that there is an effort to secure sustainability. Second, in terms of social sustainability, historical value remains as a trace of architectural place, so that it continues in people’s memory. In addition, public architecture provides public places where citizens can gather and enjoy programs, while the architectural methods showed differences influenced by cultural conditions. Third, in economic sustainability, it was shown that energy saving was achieved through cost reduction through recycling of materials, facilities, or environmental factors. In conclusion, the issues to be considered in public architectural design are the voiding of urban space through architectural devices in the construction method. In other words, the intention is to form “ground” that attempts to be part of the city, and thereby create better places. Since skin and material have a deep relationship with the environment, they should have the durability and an outer skin that are suitable for the regional environment. Finally, sustainability is to be utilized through the influx of programs that meet local and environmental characteristics. Design research into public architecture that is oriented towards urban sustainability will be a task to be carried out by the

ARC-VM: An architecture real options complexity-based valuation methodology for military systems-of-systems acquisitions

Science.gov (United States)

Domercant, Jean Charles

The combination of today's national security environment and mandated acquisition policies makes it necessary for military systems to interoperate with each other to greater degrees. This growing interdependency results in complex Systems-of-Systems (SoS) that only continue to grow in complexity to meet evolving capability needs. Thus, timely and affordable acquisition becomes more difficult, especially in the face of mounting budgetary pressures. To counter this, architecting principles must be applied to SoS design. The research objective is to develop an Architecture Real Options Complexity-Based Valuation Methodology (ARC-VM) suitable for acquisition-level decision making, where there is a stated desire for more informed tradeoffs between cost, schedule, and performance during the early phases of design. First, a framework is introduced to measure architecture complexity as it directly relates to military SoS. Development of the framework draws upon a diverse set of disciplines, including Complexity Science, software architecting, measurement theory, and utility theory. Next, a Real Options based valuation strategy is developed using techniques established for financial stock options that have recently been adapted for use in business and engineering decisions. The derived complexity measure provides architects with an objective measure of complexity that focuses on relevant complex system attributes. These attributes are related to the organization and distribution of SoS functionality and the sharing and processing of resources. The use of Real Options provides the necessary conceptual and visual framework to quantifiably and traceably combine measured architecture complexity, time-valued performance levels, as well as programmatic risks and uncertainties. An example suppression of enemy air defenses (SEAD) capability demonstrates the development and usefulness of the resulting architecture complexity & Real Options based valuation methodology. Different

A Standards-Based Architecture Proposal for Integrating Patient mHealth Apps to Electronic Health Record Systems.

Science.gov (United States)

Marceglia, S; Fontelo, P; Rossi, E; Ackerman, M J

2015-01-01

Mobile health Applications (mHealth Apps) are opening the way to patients' responsible and active involvement with their own healthcare management. However, apart from Apps allowing patient's access to their electronic health records (EHRs), mHealth Apps are currently developed as dedicated "island systems". Although much work has been done on patient's access to EHRs, transfer of information from mHealth Apps to EHR systems is still low. This study proposes a standards-based architecture that can be adopted by mHealth Apps to exchange information with EHRs to support better quality of care. Following the definition of requirements for the EHR/mHealth App information exchange recently proposed, and after reviewing current standards, we designed the architecture for EHR/mHealth App integration. Then, as a case study, we modeled a system based on the proposed architecture aimed to support home monitoring for congestive heart failure patients. We simulated such process using, on the EHR side, OpenMRS, an open source longitudinal EHR and, on the mHealth App side, the iOS platform. The integration architecture was based on the bi-directional exchange of standard documents (clinical document architecture rel2 - CDA2). In the process, the clinician "prescribes" the home monitoring procedures by creating a CDA2 prescription in the EHR that is sent, encrypted and de-identified, to the mHealth App to create the monitoring calendar. At the scheduled time, the App alerts the patient to start the monitoring. After the measurements are done, the App generates a structured CDA2-compliant monitoring report and sends it to the EHR, thus avoiding local storage. The proposed architecture, even if validated only in a simulation environment, represents a step forward in the integration of personal mHealth Apps into the larger health-IT ecosystem, allowing the bi-directional data exchange between patients and healthcare professionals, supporting the patient's engagement in self

Interconnection network architectures based on integrated orbital angular momentum emitters

Science.gov (United States)

Scaffardi, Mirco; Zhang, Ning; Malik, Muhammad Nouman; Lazzeri, Emma; Klitis, Charalambos; Lavery, Martin; Sorel, Marc; Bogoni, Antonella

2018-02-01

Novel architectures for two-layer interconnection networks based on concentric OAM emitters are presented. A scalability analysis is done in terms of devices characteristics, power budget and optical signal to noise ratio by exploiting experimentally measured parameters. The analysis shows that by exploiting optical amplifications, the proposed interconnection networks can support a number of ports higher than 100. The OAM crosstalk induced-penalty, evaluated through an experimental characterization, do not significantly affect the interconnection network performance.

Coherent Architecture Development as a Basis for Technology Development

DEFF Research Database (Denmark)

Ravn, Poul Martin

coherent architectures in a technology context as a basis for identification of critical development areas, this research has been focused around the following three areas: 1. Product architecture instances for prototypes testing novel technology. 2. Product architecture definition for a sub-system based......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available...

Altering micro-environments to change population health behaviour: towards an evidence base for choice architecture interventions

Science.gov (United States)

2013-01-01

Background The idea that behaviour can be influenced at population level by altering the environments within which people make choices (choice architecture) has gained traction in policy circles. However, empirical evidence to support this idea is limited, especially its application to changing health behaviour. We propose an evidence-based definition and typology of choice architecture interventions that have been implemented within small-scale micro-environments and evaluated for their effects on four key sets of health behaviours: diet, physical activity, alcohol and tobacco use. Discussion We argue that the limitations of the evidence base are due not simply to an absence of evidence, but also to a prior lack of definitional and conceptual clarity concerning applications of choice architecture to public health intervention. This has hampered the potential for systematic assessment of existing evidence. By seeking to address this issue, we demonstrate how our definition and typology have enabled systematic identification and preliminary mapping of a large body of available evidence for the effects of choice architecture interventions. We discuss key implications for further primary research, evidence synthesis and conceptual development to support the design and evaluation of such interventions. Summary This conceptual groundwork provides a foundation for future research to investigate the effectiveness of choice architecture interventions within micro-environments for changing health behaviour. The approach we used may also serve as a template for mapping other under-explored fields of enquiry. PMID:24359583

Molecular architecture of electroactive and biodegradable copolymers composed of polylactide and carboxyl-capped aniline trimer.

Science.gov (United States)

Guo, Baolin; Finne-Wistrand, Anna; Albertsson, Ann-Christine

2010-04-12

Two-, four-, and six-armed branched copolymers with electroactive and biodegradable properties were synthesized by coupling reactions between poly(l-lactides) (PLLAs) with different architecture and carboxyl-capped aniline trimer (CCAT). The aniline oligomer CCAT was prepared from amino-capped aniline trimer and succinic anhydride. FT-IR, NMR, and SEC analyses confirmed the structure of the branched copolymers. UV-vis spectra and cyclic voltammetry of CCAT and copolymer solution showed good electroactive properties, similar to those of polyaniline. The water contact angle of the PLLAs was the highest, followed by the undoped copolymer and the doped copolymers. The values of doped four-armed copolymers were 54-63 degrees . Thermal properties of the polymers were studied by DSC and TGA. The copolymers had better thermal stability than the pure PLLAs, and the T(g) between 48-58 degrees C and T(m) between 146-177 degrees C of the copolymers were lower than those of the pure PLLA counterparts. This kind of electroactive and biodegradable copolymer has a great potential for applications in cardiovascular or neuronal tissue engineering.

Research on Information-Based Teaching in Reform and Practice of Architectural Design

Science.gov (United States)

Hao, Li-Jun; Xiao, Zhe-Tao

2017-01-01

In China, with the development of the era, the Architectural Design (AD) education has been given the requirement that students should master creative thinking mode and design method. The teaching target of integrating the Information-Based Teaching (IBT) into Creative Thinking (CT) mode is analyzed, and the Teaching Mode (TM) of integrating the…

Lunar Navigation Architecture Design Considerations

Science.gov (United States)

D'Souza, Christopher; Getchius, Joel; Holt, Greg; Moreau, Michael

2009-01-01

The NASA Constellation Program is aiming to establish a long-term presence on the lunar surface. The Constellation elements (Orion, Altair, Earth Departure Stage, and Ares launch vehicles) will require a lunar navigation architecture for navigation state updates during lunar-class missions. Orion in particular has baselined earth-based ground direct tracking as the primary source for much of its absolute navigation needs. However, due to the uncertainty in the lunar navigation architecture, the Orion program has had to make certain assumptions on the capabilities of such architectures in order to adequately scale the vehicle design trade space. The following paper outlines lunar navigation requirements, the Orion program assumptions, and the impacts of these assumptions to the lunar navigation architecture design. The selection of potential sites was based upon geometric baselines, logistical feasibility, redundancy, and abort support capability. Simulated navigation covariances mapped to entry interface flightpath- angle uncertainties were used to evaluate knowledge errors. A minimum ground station architecture was identified consisting of Goldstone, Madrid, Canberra, Santiago, Hartebeeshoek, Dongora, Hawaii, Guam, and Ascension Island (or the geometric equivalent).

Architecture-driven Migration of Legacy Systems to Cloud-enabled Software

DEFF Research Database (Denmark)

Ahmad, Aakash; Babar, Muhammad Ali

2014-01-01

of legacy systems to cloud computing. The framework leverages the software reengineering concepts that aim to recover the architecture from legacy source code. Then the framework exploits the software evolution concepts to support architecture-driven migration of legacy systems to cloud-based architectures....... The Legacy-to-Cloud Migration Horseshoe comprises of four processes: (i) architecture migration planning, (ii) architecture recovery and consistency, (iii) architecture transformation and (iv) architecture-based development of cloud-enabled software. We aim to discover, document and apply the migration...

Model-Driven Development of Safety Architectures

Science.gov (United States)

Denney, Ewen; Pai, Ganesh; Whiteside, Iain

2017-01-01

We describe the use of model-driven development for safety assurance of a pioneering NASA flight operation involving a fleet of small unmanned aircraft systems (sUAS) flying beyond visual line of sight. The central idea is to develop a safety architecture that provides the basis for risk assessment and visualization within a safety case, the formal justification of acceptable safety required by the aviation regulatory authority. A safety architecture is composed from a collection of bow tie diagrams (BTDs), a practical approach to manage safety risk by linking the identified hazards to the appropriate mitigation measures. The safety justification for a given unmanned aircraft system (UAS) operation can have many related BTDs. In practice, however, each BTD is independently developed, which poses challenges with respect to incremental development, maintaining consistency across different safety artifacts when changes occur, and in extracting and presenting stakeholder specific information relevant for decision making. We show how a safety architecture reconciles the various BTDs of a system, and, collectively, provide an overarching picture of system safety, by considering them as views of a unified model. We also show how it enables model-driven development of BTDs, replete with validations, transformations, and a range of views. Our approach, which we have implemented in our toolset, AdvoCATE, is illustrated with a running example drawn from a real UAS safety case. The models and some of the innovations described here were instrumental in successfully obtaining regulatory flight approval.

Modular Architecture for Integrated Model-Based Decision Support.

Science.gov (United States)

Gaebel, Jan; Schreiber, Erik; Oeser, Alexander; Oeltze-Jafra, Steffen

2018-01-01

Model-based decision support systems promise to be a valuable addition to oncological treatments and the implementation of personalized therapies. For the integration and sharing of decision models, the involved systems must be able to communicate with each other. In this paper, we propose a modularized architecture of dedicated systems for the integration of probabilistic decision models into existing hospital environments. These systems interconnect via web services and provide model sharing and processing capabilities for clinical information systems. Along the lines of IHE integration profiles from other disciplines and the meaningful reuse of routinely recorded patient data, our approach aims for the seamless integration of decision models into hospital infrastructure and the physicians' daily work.

Architectural Thermal Forms II: Brick Envelope

DEFF Research Database (Denmark)

Foged, Isak Worre

2013-01-01

The paper presents an architectural concept and design method that investigates the use of dynamic factors in evolutionary form finding processes. The architectural construct, phenotype, is based on a brick assembly and how this can be organized based upon material properties and environmental...... aspects selected from the factors used in the Fanger equations to determine perceived comfort. The work finds that the developed method can be applied as performance oriented driver, while at the same time allowing diversity and variation in the architectural design space....

Children Composing and the Tonal Idiom

Science.gov (United States)

Roels, Johanna Maria; Van Petegem, Peter

2016-01-01

Existing studies have demonstrated how children compose, experiment and use their imagination within the conventions of the tonal idiom with functional harmony. However, one area of research that has hardly been explored is how tonality emerges in the compositions of children who compose by transforming their own non-musical ideas, such as their…

The Architecture of WiFi-Based WSN for AMR System and E-HWMP Routing Protocol

Directory of Open Access Journals (Sweden)

Li LI

2014-02-01

Full Text Available With the development of SoC technology in recent years, the ultra-low power WiFi System on SoC Chip has emerged. As a result, WiFi-based Wireless Sensor Networks come into use, especially used in Automatic Meter Reading. While because the nodes of Wireless Sensor Networks have limited energy supply, smaller storage capability and slower calculation ability, the current WiFi technology cannot be directly applied to WiFi-based Wireless Sensor Networks. The protocols should be upgraded and the security algorithms should be improved to meet the new requests. Firstly, this article describes the network architecture of WiFi-based WSN for AMR system and discusses the reason for using this analogous Mesh architecture. Secondly, the new Hardware architecture of WiFi-based WSN node is designed to realize the AMR system and verify the research work. The node can collect the data of power meter by WiFi and can be powered by a Lithium Battery. Thirdly, on the basis of study work of WiFi original routing protocol HWMP, a new method on improving the energy saving ability of HWMP to adapt the new features of WiFi-based WSN is proposed. And the simulation work on the new routing protocol E-HWMP has been done with NS2 and the simulation results show that the life cycle of the network has been extended to some degree.

Open system architecture for condition based maintenance applied to a hydroelectric power plant

Energy Technology Data Exchange (ETDEWEB)

Amaya, E.J.; Alvares, A.J. [University of Brasilia (UnB), DF (Brazil). Mechanical and Mechatronic Dept.], Emails: eamaya@unb.br, alvares@AlvaresTech.com; Gudwin, R.R. [State University of Campinas (UNICAMP), SP (Brazil). Computer Engineering and Industrial Automation Dept.], E-mail: gudwin@dca.fee.unicamp.br

2009-07-01

The hydroelectric power plant of Balbina is implementing a condition based maintenance system applying an open, modular and scalable integrated architecture to provide comprehensive solutions and support to the end users like operational and maintenance team. The system called SIMPREBAL (Predictive Maintenance System of Balbina) is advocate of open standards, in particular through collaborative research programmers. In the developing is clearly understands the need for both, industry standards and a simple to use software development tool chain, supporting the development of complex condition based maintenance systems with multiple partners. The Open System Architecture for Condition Based Maintenance (OSA-CBM) is a standard that consider seven hierarchic layers that represent a logic transition or performed data flow from the data acquisition layer, through the intermediates layers as signal processing, condition monitor, health assessment, prognostics and decision support, to arrive to the presentation layer. SIMPREBAL is being implementing as an OSA-CBM software framework and tool set that allows the creation of truly integrated, comprehensive maintenance solutions through the internet. This paper identifies specific benefits of the application of the OSA-CBM in comprehensive solutions of condition based maintenance for a hydroelectric power plant. (author)

The architecture of LAMOST observatory control system

International Nuclear Information System (INIS)

Wang Jian; Jin Ge; Yu Xiaoqi; Wan Changsheng; Hao Likai; Li Xihua

2005-01-01

The design of architecture is the one of the most important part in development of Observatory Control System (OCS) for LAMOST. Based on the complexity of LAMOST, long time of development for LAMOST and long life-cycle of OCS system, referring many kinds of architecture pattern, the architecture of OCS is established which is a component-based layered system using many patterns such as the MVC and proxy. (authors)

Universally composable protocols with relaxed set-up assumptions

DEFF Research Database (Denmark)

Barak, Boaz; Canetti, Ran; Nielsen, Jesper Buus

2004-01-01

A desirable goal for cryptographic protocols is to guarantee security when the protocol is composed with other protocol instances. Universally composable (UC) protocols provide this guarantee in a strong sense: A protocol remains secure even when composed concurrently with an unbounded number of ...

Photo-Modeling and Cloud Computing. Applications in the Survey of Late Gothic Architectural Elements

Science.gov (United States)

Casu, P.; Pisu, C.

2013-02-01

This work proposes the application of the latest methods of photo-modeling to the study of Gothic architecture in Sardinia. The aim is to consider the versatility and ease of use of such documentation tools in order to study architecture and its ornamental details. The paper illustrates a procedure of integrated survey and restitution, with the purpose to obtain an accurate 3D model of some gothic portals. We combined the contact survey and the photographic survey oriented to the photo-modelling. The software used is 123D Catch by Autodesk an Image Based Modelling (IBM) system available free. It is a web-based application that requires a few simple steps to produce a mesh from a set of not oriented photos. We tested the application on four portals, working at different scale of detail: at first the whole portal and then the different architectural elements that composed it. We were able to model all the elements and to quickly extrapolate simple sections, in order to make a comparison between the moldings, highlighting similarities and differences. Working in different sites at different scale of detail, have allowed us to test the procedure under different conditions of exposure, sunshine, accessibility, degradation of surface, type of material, and with different equipment and operators, showing if the final result could be affected by these factors. We tested a procedure, articulated in a few repeatable steps, that can be applied, with the right corrections and adaptations, to similar cases and/or larger or smaller elements.

Implementation of a 4-tier Cloud-Based Architecture for Collaborative Health Care Delivery

Directory of Open Access Journals (Sweden)

N. A. Azeez

2016-06-01

Full Text Available Cloud services permit healthcare providers to ensure information handling and allow different service resources such as Software as a Service (SaaS, Platform as a Service (PaaS and Infrastructure as a Service (IaaS on the Internet, given that security and information proprietorship concerns are attended to. Health Care Providers (HCPs in Nigeria however, have been confronted with various issues because of their method of operations. Amongst the issues are ill-advised methods of data storage and unreliable nature of patient medical records. Apart from these challenges, trouble in accessing quality healthcare services, high cost of medical services, and wrong analysis and treatment methodology are not left out. Cloud Computing has relatively possessed the capacity to give proficient and reliable method for securing medical information and the need for data mining tools in this form of distributed system will go a long way in achieving the objective set out for this project. The aim of this research therefore is to implement a cloud-based architecture that is suitable to integrate Healthcare Delivery into the cloud to provide a productive mode of operation. The proposed architecture consists of four phases (4-Tier; a User Authentication and Access Control Engine (UAACE which prevents unauthorized access to patient medical records and also utilizes standard encryption/decoding techniques to ensure privacy of such records. The architecture likewise contains a Data Analysis and Pattern Prediction Unit (DAPPU which gives valuable data that guides decision making through standard Data mining procedures as well as Cloud Service Provider (CSP and Health Care Providers (HCPs. The architecture which has been implemented on CloudSim has proved to be efficient and reliable base on the results obtained when compared with previous work.

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

Polyhomologation based on in situ generated Boron-thexyl-silaboracyclic initiating sites: a novel strategy towards the synthesis of polyethylene-based complex architectures

KAUST Repository

Zhang, Zhen; Zhang, Hefeng; Gnanou, Yves; Hadjichristidis, Nikolaos

2015-01-01

A novel strategy, based on the in situ generated Boron-thexyl-silaboracyclic initiating sites for the polyhomologation of dimethylsulfoxonium methylide, has been developed for the synthesis of complex polyethylene-based architectures. As examples

High accuracy amplitude and phase measurements based on a double heterodyne architecture

International Nuclear Information System (INIS)

Zhao Danyang; Wang Guangwei; Pan Weimin

2015-01-01

In the digital low level RF (LLRF) system of a circular (particle) accelerator, the RF field signal is usually down converted to a fixed intermediate frequency (IF). The ratio of IF and sampling frequency determines the processing required, and differs in various LLRF systems. It is generally desirable to design a universally compatible architecture for different IFs with no change to the sampling frequency and algorithm. A new RF detection method based on a double heterodyne architecture for wide IF range has been developed, which achieves the high accuracy requirement of modern LLRF. In this paper, the relation of IF and phase error is systematically analyzed for the first time and verified by experiments. The effects of temperature drift for 16 h IF detection are inhibited by the amplitude and phase calibrations. (authors)

Real-time FPGA architectures for computer vision

Science.gov (United States)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2000-03-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low level image processing. The FPGA-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on a dedicated VLSI to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real time performance are discussed. Some results are presented and discussed.

SmartCell: An Energy Efficient Coarse-Grained Reconfigurable Architecture for Stream-Based Applications

Directory of Open Access Journals (Sweden)

Liang Cao

2009-01-01

Full Text Available This paper presents SmartCell, a novel coarse-grained reconfigurable architecture, which tiles a large number of processor elements with reconfigurable interconnection fabrics on a single chip. SmartCell is able to provide high performance and energy efficient processing for stream-based applications. It can be configured to operate in various modes, such as SIMD, MIMD, and systolic array. This paper describes the SmartCell architecture design, including processing element, reconfigurable interconnection fabrics, instruction and control process, and configuration scheme. The SmartCell prototype with 64 PEs is implemented using 0.13  m CMOS standard cell technology. The core area is about 8.5  , and the power consumption is about 1.6 mW/MHz. The performance is evaluated through a set of benchmark applications, and then compared with FPGA, ASIC, and two well-known reconfigurable architectures including RaPiD and Montium. The results show that the SmartCell can bridge the performance and flexibility gap between ASIC and FPGA. It is also about 8% and 69% more energy efficient than Montium and RaPiD systems for evaluated benchmarks. Meanwhile, SmartCell can achieve 4 and 2 times more throughput gains when comparing with Montium and RaPiD, respectively. It is concluded that SmartCell system is a promising reconfigurable and energy efficient architecture for stream processing.

Efficient Processing of a Rainfall Simulation Watershed on an FPGA-Based Architecture with Fast Access to Neighbourhood Pixels

Directory of Open Access Journals (Sweden)

Yeong LeeSeng

2009-01-01

Full Text Available This paper describes a hardware architecture to implement the watershed algorithm using rainfall simulation. The speed of the architecture is increased by utilizing a multiple memory bank approach to allow parallel access to the neighbourhood pixel values. In a single read cycle, the architecture is able to obtain all five values of the centre and four neighbours for a 4-connectivity watershed transform. The storage requirement of the multiple bank implementation is the same as a single bank implementation by using a graph-based memory bank addressing scheme. The proposed rainfall watershed architecture consists of two parts. The first part performs the arrowing operation and the second part assigns each pixel to its associated catchment basin. The paper describes the architecture datapath and control logic in detail and concludes with an implementation on a Xilinx Spartan-3 FPGA.

Dependencies among Architectural Views Got from Software Requirements Based on a Formal Model

Directory of Open Access Journals (Sweden)

Osis Janis

2014-12-01

Full Text Available A system architect has software requirements and some unspecified knowledge about a problem domain (e.g., an enterprise as source information for assessment and evaluation of possible solutions and getting the target point, a preliminary software design. The solving factor is architect’s experience and expertise in the problem domain (“AS-IS”. A proposed approach is dedicated to assist a system architect in making an appropriate decision on the solution (“TO-BE”. It is based on a formal mathematical model, Topological Functioning Model (TFM. Compliant TFMs can be transformed into software architectural views. The paper demonstrates and discusses tracing dependency links from the requirements to and between the architectural views.

Enhanced Flexibility and Reusability through State Machine-Based Architectures for Multisensor Intelligent Robotics

Directory of Open Access Journals (Sweden)

Héctor Herrero

2017-05-01

Full Text Available This paper presents a state machine-based architecture, which enhances the flexibility and reusability of industrial robots, more concretely dual-arm multisensor robots. The proposed architecture, in addition to allowing absolute control of the execution, eases the programming of new applications by increasing the reusability of the developed modules. Through an easy-to-use graphical user interface, operators are able to create, modify, reuse and maintain industrial processes, increasing the flexibility of the cell. Moreover, the proposed approach is applied in a real use case in order to demonstrate its capabilities and feasibility in industrial environments. A comparative analysis is presented for evaluating the presented approach versus traditional robot programming techniques.

Kirigami-based three-dimensional OLED concepts for architectural lighting

Science.gov (United States)

Kim, Taehwan; Price, Jared S.; Grede, Alex; Lee, Sora; Jackson, Thomas N.; Giebink, Noel C.

2017-08-01

Dramatic improvements in white organic light emitting diode (OLED) performance and lifetime over the past decade are driving commercialization of this technology for solid-state lighting applications. As white OLEDs attempt to gain a foothold in the market, however, the biggest challenge outside of lowering their manufacturing cost arguably now lies in creating an architecturally adaptable form factor that will drive public adoption and differentiate OLED lighting from established LED products. Here, we present concepts based on kirigami (the Japanese art of paper cutting and folding) that enable intricate three-dimensional (3D) OLED lighting structures from two dimensional layouts. Using an ultraflexible, encapsulated OLED device architecture on 25 60 μm thick clear polyimide film substrate with simple cut and fold patterns, we demonstrate a series of different lighting concepts ranging from a simple `pop up' structure to more complex designs such as stretchable window blind-like panel, candle flame, and multi-element globe lamp. We only find slight degradation in OLED electrical performance when these designs are shaped into 3D. Our results point to an alternate paradigm for OLED lighting that moves beyond traditional 2D panels toward 3D designs that deliver unique and creative new opportunities for lighting.

HyperCell: A Bio-inspired Design Framework for Real-time Interactive Architectures

Directory of Open Access Journals (Sweden)

Jia-Rey Chang

2018-01-01

Full Text Available This pioneering research focuses on Biomimetic Interactive Architecture using “Computation”, “Embodiment”, and “Biology” to generate an intimate embodied convergence to propose a novel rule-based design framework for creating organic architectures composed of swarm-based intelligent components. Furthermore, the research boldly claims that Interactive Architecture should emerge as the next truly Organic Architecture. As the world and society are dynamically changing, especially in this digital era, the research dares to challenge the Utilitas, Firmitas, and Venustas of the traditional architectural Weltanschauung, and rejects them by adopting the novel notion that architecture should be dynamic, fluid, and interactive. This project reflects a trajectory from the 1960’s with the advent of the avant-garde architectural design group, Archigram, and its numerous intriguing and pioneering visionary projects. Archigram’s non-standard, mobile, and interactive projects profoundly influenced a new generation of architects to explore the connection between technology and their architectural projects. This research continues this trend of exploring novel design thinking and the framework of Interactive Architecture by discovering the interrelationship amongst three major topics: “Computation”, “Embodiment”, and “Biology”. The project aims to elucidate pioneering research combining these three topics in one discourse: “Bio-inspired digital architectural design”. These three major topics will be introduced in this Summary.   “Computation”, is any type of calculation that includes both arithmetical and nonarithmetical steps and follows a well-defined model understood and described as, for example, an algorithm. But, in this research, refers to the use of data storage, parametric design application, and physical computing for developing informed architectural designs. “Form” has always been the most critical focus in

Network topology exploration of mesh-based coarse-grain reconfigurable architectures

NARCIS (Netherlands)

Bansal, N.; Gupta, S.; Dutt, N.D.; Nicolau, A.; Gupta, R.

2004-01-01

Several coarse-grain reconfigurable architectures proposed recently consist of a large number of processing elements (PEs) connected in a mesh-like network topology. We study the effects of three aspects of network topology exploration on the performance of applications on these architectures: (a)

A Distributed Public Key Infrastructure Based on Threshold Cryptography for the HiiMap Next Generation Internet Architecture

Directory of Open Access Journals (Sweden)

Oliver Hanka

2011-02-01

Full Text Available In this article, a security extension for the HiiMap Next Generation Internet Architecture is presented. We regard a public key infrastructure which is integrated into the mapping infrastructure of the locator/identifier-split addressing scheme. The security approach is based on Threshold Cryptography which enables a sharing of keys among the mapping servers. Hence, a more trustworthy and fair approach for a Next Generation Internet Architecture as compared to the state of the art approach is fostered. Additionally, we give an evaluation based on IETF AAA recommendations for security-related systems.

Evaluating the Instructional Architecture of Web-Based Learning Tools (WBLTs): Direct Instruction vs. Constructivism Revisited

Science.gov (United States)

Kay, Robin

2013-01-01

Web-based learning tools (WBLTs), also known as learning objects, have been evaluated with a wide range of metrics, but rarely with respect to pedagogical design. The current study evaluated the impact of instructional architecture (direct instruction vs. constructive-based) on middle (n = 333)

Time and Power Optimizations in FPGA-Based Architectures for Polyphase Channelizers

DEFF Research Database (Denmark)

Awan, Mehmood-Ur-Rehman; Harris, Fred; Koch, Peter

2012-01-01

This paper presents the time and power optimization considerations for Field Programmable Gate Array (FPGA) based architectures for a polyphase filter bank channelizer with an embedded square root shaping filter in its polyphase engine. This configuration performs two different re-sampling tasks......% slice register resources of a Xilinx Virtex-5 FPGA, operating at 400 and 480 MHz, and consuming 1.9 and 2.6 Watts of dynamic power, respectively....

Preindustrial versus postindustrial Architecture and Building Techniques

DEFF Research Database (Denmark)

Vestergaard, Inge

2014-01-01

How can preindustrial architecture inspire sustainable thinking in postindustrial architectural design? How can we learn from experience and how can social, economic and environmental conditions give perspectives and guide a knowledge based evolution of basic experience towards modern industriali......How can preindustrial architecture inspire sustainable thinking in postindustrial architectural design? How can we learn from experience and how can social, economic and environmental conditions give perspectives and guide a knowledge based evolution of basic experience towards modern...... industrialized building processes? Identification of sustainable parameters related to change in society, to building technique and to comfort are illustrated through two Danish building types, which are different in time, but similar in function. One representing evolution and experience based countryside...... fisherman’s house built around year 1700; and second a frontrunner suburban family house built year 2008. The analysis involves architectural, technical and comfort matters and will state the levels of design, social conditions, sustainable and energy efficient parameters. Results will show lessons learned...

(Invited) Wavy Channel TFT Architecture for High Performance Oxide Based Displays

KAUST Repository

Hanna, Amir; Hussain, Aftab M.; Hussain, Aftab M.; Ghoneim, Mohamed T.; Rojas, Jhonathan Prieto; Sevilla, Galo T.; Hussain, Muhammad Mustafa

2015-01-01

We show the effectiveness of wavy channel architecture for thin film transistor application for increased output current. This specific architecture allows increased width of the device by adopting a corrugated shape of the substrate without any further real estate penalty. The performance improvement is attributed not only to the increased transistor width, but also to enhanced applied electric field in the channel due to the wavy architecture.

(Invited) Wavy Channel TFT Architecture for High Performance Oxide Based Displays

KAUST Repository

Hanna, Amir

2015-05-22

We show the effectiveness of wavy channel architecture for thin film transistor application for increased output current. This specific architecture allows increased width of the device by adopting a corrugated shape of the substrate without any further real estate penalty. The performance improvement is attributed not only to the increased transistor width, but also to enhanced applied electric field in the channel due to the wavy architecture.

Enterprise Architecture Analysis with XML

NARCIS (Netherlands)

F.S. de Boer (Frank); M.M. Bonsangue (Marcello); J.F. Jacob (Joost); A. Stam; L.W.N. van der Torre (Leon)

2005-01-01

htmlabstractThis paper shows how XML can be used for static and dynamic analysis of architectures. Our analysis is based on the distinction between symbolic and semantic models of architectures. The core of a symbolic model consists of its signature that specifies symbolically its structural

SUSTAINABLE ARCHITECTURE : WHAT ARCHITECTURE STUDENTS THINK

OpenAIRE

SATWIKO, PRASASTO

2013-01-01

Sustainable architecture has become a hot issue lately as the impacts of climate change become more intense. Architecture educations have responded by integrating knowledge of sustainable design in their curriculum. However, in the real life, new buildings keep coming with designs that completely ignore sustainable principles. This paper discusses the results of two national competitions on sustainable architecture targeted for architecture students (conducted in 2012 and 2013). The results a...

A Trusted Computing Architecture of Embedded System Based on Improved TPM

Directory of Open Access Journals (Sweden)

Wang Xiaosheng

2017-01-01

Full Text Available The Trusted Platform Module (TPM currently used by PCs is not suitable for embedded systems, it is necessary to improve existing TPM. The paper proposes a trusted computing architecture with new TPM and the cryptographic system developed by China for the embedded system. The improved TPM consists of the Embedded System Trusted Cryptography Module (eTCM and the Embedded System Trusted Platform Control Module (eTPCM, which are combined and implemented the TPM’s autonomous control, active defense, high-speed encryption/decryption and other function through its internal bus arbitration module and symmetric and asymmetric cryptographic engines to effectively protect the security of embedded system. In our improved TPM, a trusted measurement method with chain model and star type model is used. Finally, the improved TPM is designed by FPGA, and it is used to a trusted PDA to carry out experimental verification. Experiments show that the trusted architecture of the embedded system based on the improved TPM is efficient, reliable and secure.

Enterprise Architecture Analysis with XML

OpenAIRE

Boer, Frank; Bonsangue, Marcello; Jacob, Joost; Stam, A.; Torre, Leon

2005-01-01

htmlabstractThis paper shows how XML can be used for static and dynamic analysis of architectures. Our analysis is based on the distinction between symbolic and semantic models of architectures. The core of a symbolic model consists of its signature that specifies symbolically its structural elements and their relationships. A semantic model is defined as a formal interpretation of the symbolic model. This provides a formal approach to the design of architectural description languages and a g...

Architecture

OpenAIRE

Clear, Nic

2014-01-01

When discussing science fiction’s relationship with architecture, the usual practice is to look at the architecture “in” science fiction—in particular, the architecture in SF films (see Kuhn 75-143) since the spaces of literary SF present obvious difficulties as they have to be imagined. In this essay, that relationship will be reversed: I will instead discuss science fiction “in” architecture, mapping out a number of architectural movements and projects that can be viewed explicitly as scien...

Space Based Radar-System Architecture Design and Optimization for a Space Based Replacement to AWACS

National Research Council Canada - National Science Library

Wickert, Douglas

1997-01-01

Through a process of system architecture design, system cost modeling, and system architecture optimization, we assess the feasibility of performing the next generation Airborne Warning and Control System (AWACS...

A Standard-Based and Context-Aware Architecture for Personal Healthcare Smart Gateways.

Science.gov (United States)

Santos, Danilo F S; Gorgônio, Kyller C; Perkusich, Angelo; Almeida, Hyggo O

2016-10-01

The rising availability of Personal Health Devices (PHDs) capable of Personal Network Area (PAN) communication and the desire of keeping a high quality of life are the ingredients of the Connected Health vision. In parallel, a growing number of personal and portable devices, like smartphones and tablet computers, are becoming capable of taking the role of health gateway, that is, a data collector for the sensor PHDs. However, as the number of PHDs increase, the number of other peripherals connected in PAN also increases. Therefore, PHDs are now competing for medium access with other devices, decreasing the Quality of Service (QoS) of health applications in the PAN. In this article we present a reference architecture to prioritize PHD connections based on their state and requirements, creating a healthcare Smart Gateway. Healthcare context information is extracted by observing the traffic through the gateway. A standard-based approach was used to identify health traffic based on ISO/IEEE 11073 family of standards. A reference implementation was developed showing the relevance of the problem and how the proposed architecture can assist in the prioritization. The reference Smart Gateway solution was integrated with a Connected Health System for the Internet of Things, validating its use in a real case scenario.

An Information Theoretic Framework and Self-organizing Agent- based Sensor Network Architecture for Power Plant Condition Monitoring

Energy Technology Data Exchange (ETDEWEB)

Loparo, Kenneth [Case Western Reserve Univ., Cleveland, OH (United States); Kolacinski, Richard [Case Western Reserve Univ., Cleveland, OH (United States); Threeanaew, Wanchat [Case Western Reserve Univ., Cleveland, OH (United States); Agharazi, Hanieh [Case Western Reserve Univ., Cleveland, OH (United States)

2017-01-30

A central goal of the work was to enable both the extraction of all relevant information from sensor data, and the application of information gained from appropriate processing and fusion at the system level to operational control and decision-making at various levels of the control hierarchy through: 1. Exploiting the deep connection between information theory and the thermodynamic formalism, 2. Deployment using distributed intelligent agents with testing and validation in a hardware-in-the loop simulation environment. Enterprise architectures are the organizing logic for key business processes and IT infrastructure and, while the generality of current definitions provides sufficient flexibility, the current architecture frameworks do not inherently provide the appropriate structure. Of particular concern is that existing architecture frameworks often do not make a distinction between ``data'' and ``information.'' This work defines an enterprise architecture for health and condition monitoring of power plant equipment and further provides the appropriate foundation for addressing shortcomings in current architecture definition frameworks through the discovery of the information connectivity between the elements of a power generation plant. That is, to identify the correlative structure between available observations streams using informational measures. The principle focus here is on the implementation and testing of an emergent, agent-based, algorithm based on the foraging behavior of ants for eliciting this structure and on measures for characterizing differences between communication topologies. The elicitation algorithms are applied to data streams produced by a detailed numerical simulation of Alstom’s 1000 MW ultra-super-critical boiler and steam plant. The elicitation algorithm and topology characterization can be based on different informational metrics for detecting connectivity, e.g. mutual information and linear correlation.

Flexible weapons architecture design

Science.gov (United States)

Pyant, William C., III

Present day air-delivered weapons are of a closed architecture, with little to no ability to tailor the weapon for the individual engagement. The closed architectures require weaponeers to make the target fit the weapon instead of fitting the individual weapons to a target. The concept of a flexible weapons aims to modularize weapons design using an open architecture shell into which different modules are inserted to achieve the desired target fractional damage while reducing cost and civilian casualties. This thesis shows that the architecture design factors of damage mechanism, fusing, weapons weight, guidance, and propulsion are significant in enhancing weapon performance objectives, and would benefit from modularization. Additionally, this thesis constructs an algorithm that can be used to design a weapon set for a particular target class based on these modular components.

Service Modularity and Architecture

DEFF Research Database (Denmark)

Brax, Saara A.; Bask, Anu; Hsuan, Juliana

2017-01-01

, platform-based and mass-customized service business models, comparative research designs, customer perspectives and service experience, performance in context of modular services, empirical evidence of benefits and challenges, architectural innovation in services, modularization in multi-provider contexts......Purpose: Services are highly important in a world economy which has increasingly become service driven. There is a growing need to better understand the possibilities for, and requirements of, designing modular service architectures. The purpose of this paper is to elaborate on the roots...... of the emerging research stream on service modularity, provide a concise overview of existing work on the subject, and outline an agenda for future research on service modularity and architecture. The articles in the special issue offer four diverse sets of research on service modularity and architecture. Design...

Music and emotion-a composer's perspective.

Science.gov (United States)

Douek, Joel

2013-01-01

This article takes an experiential and anecdotal look at the daily lives and work of film composers as creators of music. It endeavors to work backwards from what practitioners of the art and craft of music do instinctively or unconsciously, and try to shine a light on it as a conscious process. It examines the role of the film composer in his task to convey an often complex set of emotions, and communicate with an immediacy and universality that often sit outside of common language. Through the experiences of the author, as well as interviews with composer colleagues, this explores both concrete and abstract ways in which music can bring meaning and magic to words and images, and as an underscore to our daily lives.

John Hejduk's Pursuit of an Architectural Ethos

DEFF Research Database (Denmark)

Søberg, Martin

2012-01-01

Reflected, artistic practices and design-based research are drastically expanding fields within architectural academia. However, the interest in uniting theory and practice is not entirely new. Just a few decades ago, before a ‘death of theory’ was proclaimed, questions of architectural epistemol......Reflected, artistic practices and design-based research are drastically expanding fields within architectural academia. However, the interest in uniting theory and practice is not entirely new. Just a few decades ago, before a ‘death of theory’ was proclaimed, questions of architectural...... epistemology, of the language(s) of architecture, were indeed of profound interest to the discipline. This essay returns to and examines the investigatory practices of John Hejduk in an attempt to identify a poetic method asserting difference through repetition and primarily grounded in the medium...

Architectural Drawing - an Animate Field

DEFF Research Database (Denmark)

Hougaard, Anna Katrine

2015-01-01

Architectural drawing is changing because architects today draw with computers. Due to this change digital diagrams employed by computational architectural practices are often emphasized as powerful structures of control and organisation in the design process. But there are also diagrams, which do...... ways of directing behaviour of artefacts and living things without controlling this behaviour completely. I analyse a musical composition by John Cage as an example of a sketch diagram, and then hypothesize that orthogonal, architectural drawing can work in similar ways. Thereby I hope to point out...... important affordance of architectural drawing as a ¬hybrid between the openness of hand-sketching and the rule-based-ness of diagramming, an affordance which might be useful in the migrational zone of current architectural drawing where traditional hand drawing techniques and computer drawing techniques...

Actuation mechanisms of carbon nanotube-based architectures

Science.gov (United States)

Geier, Sebastian; Mahrholz, Thorsten; Wierach, Peter; Sinapius, Michael

2016-04-01

State of the art smart materials such as piezo ceramics or electroactive polymers cannot feature both, mechanical stiffness and high active strain. Moreover, properties like low density, high mechanical stiffness and high strain at the same time driven by low energy play an increasingly important role for their future application. Carbon nanotubes (CNT), show this behavior. Their active behavior was observed 1999 the first time using paper-like mats made of CNT. Therefore the CNT-papers are electrical charged within an electrolyte thus forming a double- layer. The measured deflection of CNT material is based on the interaction between the charged high surface area formed by carbon nanotubes and ions provided by the electrolyte. Although CNT-papers have been extensively analyzed as well at the macro-scale as nano-scale there is still no generally accepted theory for the actuation mechanism. This paper focuses on investigations of the actuation mechanisms of CNT-papers in comparison to vertically aligned CNT-arrays. One reason of divergent results found in literature might be attributed to different types of CNT samples. While CNT-papers represent architectures of short CNTs which need to bridge each other to form the dimensions of the sample, the continuous CNTs of the array feature a length of almost 3 mm, along which the experiments are carried out. Both sample types are tested within an actuated tensile test set-up under different conditions. While the CNT-papers are tested in water-based electrolytes with comparably small redox-windows the hydrophobic CNT-arrays are tested in ionic liquids with comparatively larger redox-ranges. Furthermore an in-situ micro tensile test within an SEM is carried out to prove the optimized orientation of the MWCNTs as result of external load. It was found that the performance of CNT-papers strongly depends on the test conditions. However, the CNT-arrays are almost unaffected by the conditions showing active response at negative

Rapid architecture alternative modeling (RAAM): A framework for capability-based analysis of system of systems architectures

Science.gov (United States)

Iacobucci, Joseph V.

problem domain by establishing an effective means to communicate the semantics from the RAAM framework. These techniques make it possible to include diverse multi-metric models within the RAAM framework in addition to system and operational level trades. A canonical example was used to explore the uses of the methodology. The canonical example contains all of the features of a full system of systems architecture analysis study but uses fewer tasks and systems. Using RAAM with the canonical example it was possible to consider both system and operational level trades in the same analysis. Once the methodology had been tested with the canonical example, a Suppression of Enemy Air Defenses (SEAD) capability model was developed. Due to the sensitive nature of analyses on that subject, notional data was developed. The notional data has similar trends and properties to realistic Suppression of Enemy Air Defenses data. RAAM was shown to be traceable and provided a mechanism for a unified treatment of a variety of metrics. The SEAD capability model demonstrated lower computer runtimes and reduced model creation complexity as compared to methods currently in use. To determine the usefulness of the implementation of the methodology on current computing hardware, RAAM was tested with system of system architecture studies of different sizes. This was necessary since system of systems may be called upon to accomplish thousands of tasks. It has been clearly demonstrated that RAAM is able to enumerate and evaluate the types of large, complex design spaces usually encountered in capability based design, oftentimes providing the ability to efficiently search the entire decision space. The core algorithms for generation and evaluation of alternatives scale linearly with expected problem sizes. The SEAD capability model outputs prompted the discovery a new issue, the data storage and manipulation requirements for an analysis. Two strategies were developed to counter large data sizes, the use

进化作曲研究%Research on evolutionary music composer system

Institute of Scientific and Technical Information of China (English)

汪镭; 郑晓妹; 申林

2014-01-01

Algorithmic composition is the most attractive research area in computer music and genetic algorithm-based evolution-ary music composer system has become a hot spot in the algorithmic composition.This paper gives a structure of evolutionary mu-sic composer system,analyzes different goals of music composer systems,and then discusses two types of evolutionary music com-poser system from the aspect of fitness function design.Finally,several instances of evolutionary music composer system are ana-lyzed.%算法作曲是计算机音乐中最具吸引力的研究领域，而基于遗传算法的进化作曲系统已成为算法作曲中的热点。给出了进化作曲系统的结构，分析了系统不同的作曲目标，从适应度函数的设计讨论了两类作曲系统。最后给出了几个作曲系统实例分析。

Modeling Architectural Patterns Using Architectural Primitives

NARCIS (Netherlands)

Zdun, Uwe; Avgeriou, Paris

2005-01-01

Architectural patterns are a key point in architectural documentation. Regrettably, there is poor support for modeling architectural patterns, because the pattern elements are not directly matched by elements in modeling languages, and, at the same time, patterns support an inherent variability that

Distributed and decentralized control architectures for converter-interfaced microgrids

DEFF Research Database (Denmark)

Dragicevic, Tomislav; Wu, Dan; Shafiee, Qobad

2017-01-01

This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods and info......This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods...... and information sharing algorithms applied in these architectures are reviewed and examined in a hierarchical manner, in order to point out benefits they will bring to future microgrid applications. The paper is concluded with a summary on existing methods and a discussion on future development trends....

A price and performance comparison of three different storage architectures for data in cloud-based systems

Science.gov (United States)

Gallagher, J. H. R.; Jelenak, A.; Potter, N.; Fulker, D. W.; Habermann, T.

2017-12-01

Providing data services based on cloud computing technology that is equivalent to those developed for traditional computing and storage systems is critical for successful migration to cloud-based architectures for data production, scientific analysis and storage. OPeNDAP Web-service capabilities (comprising the Data Access Protocol (DAP) specification plus open-source software for realizing DAP in servers and clients) are among the most widely deployed means for achieving data-as-service functionality in the Earth sciences. OPeNDAP services are especially common in traditional data center environments where servers offer access to datasets stored in (very large) file systems, and a preponderance of the source data for these services is being stored in the Hierarchical Data Format Version 5 (HDF5). Three candidate architectures for serving NASA satellite Earth Science HDF5 data via Hyrax running on Amazon Web Services (AWS) were developed and their performance examined for a set of representative use cases. The performance was based both on runtime and incurred cost. The three architectures differ in how HDF5 files are stored in the Amazon Simple Storage Service (S3) and how the Hyrax server (as an EC2 instance) retrieves their data. The results for both the serial and parallel access to HDF5 data in the S3 will be presented. While the study focused on HDF5 data, OPeNDAP and the Hyrax data server, the architectures are generic and the analysis can be extrapolated to many different data formats, web APIs, and data servers.

The nest architecture of the Florida harvester ant, Pogonomyrmex badius.

Science.gov (United States)

Tschinkel, Walter R

2004-01-01

The architecture of the subterranean nests of the Florida harvester ant, Pogonomyrmex badius, was studied through excavation and casting. Nests are composed of two basic units: descending shafts and horizontal chambers. Shafts form helices with diameters of 4 to 6 cm, and descend at an angle of about 15-20 degrees near the surface, increasing to about 70 degrees below about 50 cm in depth. Superficial chambers (engaging in digging, rather than an increase in their rate of work. All ages of workers produced similar top-heavy nests. When different ages of workers from different levels of a mature colony were allowed to re-assort themselves in a vertical test apparatus buried in the soil, older workers moved upward to assume positions in the upper parts of the nest, much as in the colonies from which they were taken. The vertical organization of workers based on age is therefore the product of active movement and choice. A possible template imparting information on depth is a carbon dioxide gradient. Carbon dioxide concentrations increased 5-fold between the surface and the depths of the nest. A preference of young workers for high carbon dioxide concentrations, and a tendency for workers to dig more under low carbon dioxide concentrations could explain both the vertical age-distribution of workers, and the top-heaviness of the nest's architecture.

Weaknesses of a dynamic identity based authentication protocol for multi-server architecture

OpenAIRE

Han, Weiwei

2012-01-01

Recently, Li et al. proposed a dynamic identity based authentication protocol for multi-server architecture. They claimed their protocol is secure and can withstand various attacks. But we found some security loopholes in the protocol. Accordingly, the current paper demonstrates that Li et al.'s protocol is vulnerable to the replay attack, the password guessing attack and the masquerade attack.

Key Technologies of Phone Storage Forensics Based on ARM Architecture

Science.gov (United States)

Zhang, Jianghan; Che, Shengbing

2018-03-01

Smart phones are mainly running Android, IOS and Windows Phone three mobile platform operating systems. The android smart phone has the best market shares and its processor chips are almost ARM software architecture. The chips memory address mapping mechanism of ARM software architecture is different with x86 software architecture. To forensics to android mart phone, we need to understand three key technologies: memory data acquisition, the conversion mechanism from virtual address to the physical address, and find the system’s key data. This article presents a viable solution which does not rely on the operating system API for a complete solution to these three issues.

Root architecture and wind-firmness of mature Pinus pinaster.

Science.gov (United States)

Danjon, Frédéric; Fourcaud, Thierry; Bert, Didier

2005-11-01

This study aims to link three-dimensional coarse root architecture to tree stability in mature timber trees with an average of 1-m rooting depth. Undamaged and uprooted trees were sampled in a stand damaged by a storm. Root architecture was measured by three-dimensional (3-D) digitizing. The distribution of root volume by root type and in wind-oriented sectors was analysed. Mature Pinus pinaster root systems were organized in a rigid 'cage' composed of a taproot, the zone of rapid taper of horizontal surface roots and numerous sinkers and deep roots, imprisoning a large mass of soil and guyed by long horizontal surface roots. Key compartments for stability exhibited strong selective leeward or windward reinforcement. Uprooted trees showed a lower cage volume, a larger proportion of oblique and intermediate depth horizontal roots and less wind-oriented root reinforcement. Pinus pinaster stability on moderately deep soils is optimized through a typical rooting pattern and a considerable structural adaptation to the prevailing wind and soil profile.

A Study Effects Architectural Marketing Capabilities on Performance Marketing unit Based on: Morgan et al case: Past Industry in Tehran

OpenAIRE

Mohammad Reza Dalvi; Robabe Seifi

2014-01-01

Over a period of time architectural marketing capabilities combination of knowledge and skills develop in to capabilities. These architectural marketing capabilities have been identified as one of the important ways firms can achieve a competitive advantage The following research tests effects architectural marketing capabilities on performance marketing unit Based on a survey .a structural equation model was developed to test our hypotheses. the study develops a structural model linking arch...

Compiling for Novel Scratch Pad Memory based Multicore Architectures for Extreme Scale Computing

Energy Technology Data Exchange (ETDEWEB)

Shrivastava, Aviral

2016-02-05

The objective of this proposal is to develop tools and techniques (in the compiler) to manage data of a task and communication among tasks on the scratch pad memory (SPM) of the core, so that any application (a set of tasks) can be executed efficiently on an SPM based manycore architecture.

Composer: Authoring Tool for iTV Programs

NARCIS (Netherlands)

R.L. Guimarães (Rodrigo); R.M.R. Costa; L.F.G. Soares

2008-01-01

htmlabstractThis paper presents Composer, an authoring tool to help creating interactive TV programs for the Brazilian Terrestrial Digital TV System. In Composer, several abstractions are defined creating different document views (structural, temporal, layout and textual). One of these views, the

The Setting is the Service: How the Architecture of Sober Living Residences Supports Community Based Recovery.

Science.gov (United States)

Wittman, Fried; Jee, Babette; Polcin, Douglas L; Henderson, Diane

2014-07-01

The architecture of residential recovery settings is an important silent partner in the alcohol/drug recovery field. The settings significantly support or hinder recovery experiences of residents, and shape community reactions to the presence of sober living houses (SLH) in ordinary neighborhoods. Grounded in the principles of Alcoholics Anonymous, the SLH provides residents with settings designed to support peer based recovery; further, these settings operate in a community context that insists on sobriety and strongly encourages attendance at 12-step meetings. Little formal research has been conducted to show how architectural features of the recovery setting - building appearance, spatial layouts, furnishings and finishes, policies for use of the facilities, physical care and maintenance of the property, neighborhood features, aspects of location in the city - function to promote (or retard) recovery, and to build (or detract from) community support. This paper uses a case-study approach to analyze the architecture of a community-based residential recovery service that has demonstrated successful recovery outcomes for its residents, is popular in its community, and has achieved state-wide recognition. The Environmental Pattern Language (Alexander, Ishikawa, & Silverstein, 1977) is used to analyze its architecture in a format that can be tested, critiqued, and adapted for use by similar programs in many communities, providing a model for replication and further research.

Architecture of buried reverse fault zone in the sedimentary basin: A case study from the Hong-Che Fault Zone of the Junggar Basin

Science.gov (United States)

Liu, Yin; Wu, Kongyou; Wang, Xi; Liu, Bo; Guo, Jianxun; Du, Yannan

2017-12-01

It is widely accepted that the faults can act as the conduits or the barrier for oil and gas migration. Years of studies suggested that the internal architecture of a fault zone is complicated and composed of distinct components with different physical features, which can highly influence the migration of oil and gas along the fault. The field observation is the most useful methods of observing the fault zone architecture, however, in the petroleum exploration, what should be concerned is the buried faults in the sedimentary basin. Meanwhile, most of the studies put more attention on the strike-slip or normal faults, but the architecture of the reverse faults attracts less attention. In order to solve these questions, the Hong-Che Fault Zone in the northwest margin of the Junggar Basin, Xinjiang Province, is chosen for an example. Combining with the seismic data, well logs and drill core data, we put forward a comprehensive method to recognize the internal architectures of buried faults. High-precision seismic data reflect that the fault zone shows up as a disturbed seismic reflection belt. Four types of well logs, which are sensitive to the fractures, and a comprehensive discriminated parameter, named fault zone index are used in identifying the fault zone architecture. Drill core provides a direct way to identify different components of the fault zone, the fault core is composed of breccia, gouge, and serpentinized or foliated fault rocks and the damage zone develops multiphase of fractures, which are usually cemented. Based on the recognition results, we found that there is an obvious positive relationship between the width of the fault zone and the displacement, and the power-law relationship also exists between the width of the fault core and damage zone. The width of the damage zone in the hanging wall is not apparently larger than that in the footwall in the reverse fault, showing different characteristics with the normal fault. This study provides a

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography

Science.gov (United States)

Reddy, Alavalapati Goutham; Das, Ashok Kumar; Odelu, Vanga; Yoo, Kee-Young

2016-01-01

Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.’s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN) logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications) tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.’s protocol and existing similar protocols. PMID:27163786

An Enhanced Biometric Based Authentication with Key-Agreement Protocol for Multi-Server Architecture Based on Elliptic Curve Cryptography.

Directory of Open Access Journals (Sweden)

Alavalapati Goutham Reddy

Full Text Available Biometric based authentication protocols for multi-server architectures have gained momentum in recent times due to advancements in wireless technologies and associated constraints. Lu et al. recently proposed a robust biometric based authentication with key agreement protocol for a multi-server environment using smart cards. They claimed that their protocol is efficient and resistant to prominent security attacks. The careful investigation of this paper proves that Lu et al.'s protocol does not provide user anonymity, perfect forward secrecy and is susceptible to server and user impersonation attacks, man-in-middle attacks and clock synchronization problems. In addition, this paper proposes an enhanced biometric based authentication with key-agreement protocol for multi-server architecture based on elliptic curve cryptography using smartcards. We proved that the proposed protocol achieves mutual authentication using Burrows-Abadi-Needham (BAN logic. The formal security of the proposed protocol is verified using the AVISPA (Automated Validation of Internet Security Protocols and Applications tool to show that our protocol can withstand active and passive attacks. The formal and informal security analyses and performance analysis demonstrates that the proposed protocol is robust and efficient compared to Lu et al.'s protocol and existing similar protocols.

Space Elevators Preliminary Architectural View

Science.gov (United States)

Pullum, L.; Swan, P. A.

Space Systems Architecture has been expanded into a process by the US Department of Defense for their large scale systems of systems development programs. This paper uses the steps in the process to establishes a framework for Space Elevator systems to be developed and provides a methodology to manage complexity. This new approach to developing a family of systems is based upon three architectural views: Operational View OV), Systems View (SV), and Technical Standards View (TV). The top level view of the process establishes the stages for the development of the first Space Elevator and is called Architectural View - 1, Overview and Summary. This paper will show the guidelines and steps of the process while focusing upon components of the Space Elevator Preliminary Architecture View. This Preliminary Architecture View is presented as a draft starting point for the Space Elevator Project.

Design Methods for Young Sustainable Architecture Practice

OpenAIRE

Jauslin, D.; Drexler, H.; Curiel, F.

2012-01-01

This paper introduces landscape aesthetics as an innovative design method for sustainable architecture. It is based on the framework of a recent paper where the young and unfamous authors criticized three of the most prominent? architects today in regard to sustainable architecture and its aesthetics. Leading architects expressed their skepticism as to whether there is such a thing as aesthetics in sustainable architecture, or for that matter, if architecture can indeed be sustainable at all....

Architectures for wrist-worn energy harvesting

Science.gov (United States)

Rantz, R.; Halim, M. A.; Xue, T.; Zhang, Q.; Gu, L.; Yang, K.; Roundy, S.

2018-04-01

This paper reports the simulation-based analysis of six dynamical structures with respect to their wrist-worn vibration energy harvesting capability. This work approaches the problem of maximizing energy harvesting potential at the wrist by considering multiple mechanical substructures; rotational and linear motion-based architectures are examined. Mathematical models are developed and experimentally corroborated. An optimization routine is applied to the proposed architectures to maximize average power output and allow for comparison. The addition of a linear spring element to the structures has the potential to improve power output; for example, in the case of rotational structures, a 211% improvement in power output was estimated under real walking excitation. The analysis concludes that a sprung rotational harvester architecture outperforms a sprung linear architecture by 66% when real walking data is used as input to the simulations.

Mars Scenario-Based Visioning: Logistical Optimization of Transportation Architectures

Science.gov (United States)

1999-01-01

The purpose of this conceptual design investigation is to examine transportation forecasts for future human Wu missions to Mars. - Scenario-Based Visioning is used to generate possible future demand projections. These scenarios are then coupled with availability, cost, and capacity parameters for indigenously designed Mars Transfer Vehicles (solar electric, nuclear thermal, and chemical propulsion types) and Earth-to-Orbit launch vehicles (current, future, and indigenous) to provide a cost-conscious dual-phase launch manifest to meet such future demand. A simulator named M-SAT (Mars Scenario Analysis Tool) is developed using this method. This simulation is used to examine three specific transportation scenarios to Mars: a limited "flaus and footprints" mission, a More ambitious scientific expedition similar to an expanded version of the Design Reference Mission from NASA, and a long-term colonization scenario. Initial results from the simulation indicate that chemical propulsion systems might be the architecture of choice for all three scenarios. With this mind, "what if' analyses were performed which indicated that if nuclear production costs were reduced by 30% for the colonization scenario, then the nuclear architecture would have a lower life cycle cost than the chemical. Results indicate that the most cost-effective solution to the Mars transportation problem is to plan for segmented development, this involves development of one vehicle at one opportunity and derivatives of that vehicle at subsequent opportunities.

On the complexity of neural network classifiers: a comparison between shallow and deep architectures.

Science.gov (United States)

Bianchini, Monica; Scarselli, Franco

2014-08-01

Recently, researchers in the artificial neural network field have focused their attention on connectionist models composed by several hidden layers. In fact, experimental results and heuristic considerations suggest that deep architectures are more suitable than shallow ones for modern applications, facing very complex problems, e.g., vision and human language understanding. However, the actual theoretical results supporting such a claim are still few and incomplete. In this paper, we propose a new approach to study how the depth of feedforward neural networks impacts on their ability in implementing high complexity functions. First, a new measure based on topological concepts is introduced, aimed at evaluating the complexity of the function implemented by a neural network, used for classification purposes. Then, deep and shallow neural architectures with common sigmoidal activation functions are compared, by deriving upper and lower bounds on their complexity, and studying how the complexity depends on the number of hidden units and the used activation function. The obtained results seem to support the idea that deep networks actually implements functions of higher complexity, so that they are able, with the same number of resources, to address more difficult problems.

Dynamic Weather Routes Architecture Overview

Science.gov (United States)

Eslami, Hassan; Eshow, Michelle

2014-01-01

Dynamic Weather Routes Architecture Overview, presents the high level software architecture of DWR, based on the CTAS software framework and the Direct-To automation tool. The document also covers external and internal data flows, required dataset, changes to the Direct-To software for DWR, collection of software statistics, and the code structure.

How Cisco Systems Used Enterprise Architecture Capability to Sustain Acquisition-Based Growth

DEFF Research Database (Denmark)

Toppenberg, Gustav; Shanks, Graeme; Henningsson, Stefan

2015-01-01

Value-creating acquisitions are a major challenge for many firms. The case of Cisco Systems shows that an advanced enterprise architecture (EA) capability can contribute to the four phases of the acquisition process: pre-acquisition preparation, acquisition selection, acquisition integration...... and post-integration management. Cisco’s EA capability improves its ability to rapidly capture value from acquisitions and to sustain its acquisition-based growth strategy over time....

Teaching Case: Enterprise Architecture Specification Case Study

Science.gov (United States)

Steenkamp, Annette Lerine; Alawdah, Amal; Almasri, Osama; Gai, Keke; Khattab, Nidal; Swaby, Carval; Abaas, Ramy

2013-01-01

A graduate course in enterprise architecture had a team project component in which a real-world business case, provided by an industry sponsor, formed the basis of the project charter and the architecture statement of work. The paper aims to share the team project experience on developing the architecture specifications based on the business case…

Affective evolutionary music composition with MetaCompose

DEFF Research Database (Denmark)

Scirea, Marco; Togelius, Julian; Eklund, Peter

2017-01-01

This paper describes the MetaCompose music generator, a compositional, extensible framework for affective music composition. In this context ‘affective’ refers to the music generator’s ability to express emotional information. The main purpose of MetaCompose is to create music in real-time that can...

Biologically-Inspired Control Architecture for Musical Performance Robots

Directory of Open Access Journals (Sweden)

Jorge Solis

2014-10-01

Full Text Available At Waseda University, since 1990, the authors have been developing anthropomorphic musical performance robots as a means for understanding human control, introducing novel ways of interaction between musical partners and robots, and proposing applications for humanoid robots. In this paper, the design of a biologically-inspired control architecture for both an anthropomorphic flutist robot and a saxophone playing robot are described. As for the flutist robot, the authors have focused on implementing an auditory feedback system to improve the calibration procedure for the robot in order to play all the notes correctly during a performance. In particular, the proposed auditory feedback system is composed of three main modules: an Expressive Music Generator, a Feed Forward Air Pressure Control System and a Pitch Evaluation System. As for the saxophone-playing robot, a pressure-pitch controller (based on the feedback error learning to improve the sound produced by the robot during a musical performance was proposed and implemented. In both cases studied, a set of experiments are described to verify the improvements achieved while considering biologically-inspired control approaches.

Universal Quantum Computing with Measurement-Induced Continuous-Variable Gate Sequence in a Loop-Based Architecture.

Science.gov (United States)

Takeda, Shuntaro; Furusawa, Akira

2017-09-22

We propose a scalable scheme for optical quantum computing using measurement-induced continuous-variable quantum gates in a loop-based architecture. Here, time-bin-encoded quantum information in a single spatial mode is deterministically processed in a nested loop by an electrically programmable gate sequence. This architecture can process any input state and an arbitrary number of modes with almost minimum resources, and offers a universal gate set for both qubits and continuous variables. Furthermore, quantum computing can be performed fault tolerantly by a known scheme for encoding a qubit in an infinite-dimensional Hilbert space of a single light mode.

Toward a Needs-Based Architecture for ‘Intelligent’ Communicative Agents: Speaking with Intention

Directory of Open Access Journals (Sweden)

Roger K. Moore

2017-12-01

Full Text Available The past few years have seen considerable progress in the deployment of voice-enabled personal assistants, first on smartphones (such as Apple’s Siri and most recently as standalone devices in people’s homes (such as Amazon’s Alexa. Such ‘intelligent’ communicative agents are distinguished from the previous generation of speech-based systems in that they claim to offer access to services and information via conversational interaction (rather than simple voice commands. In reality, conversations with such agents have limited depth and, after initial enthusiasm, users typically revert to more traditional ways of getting things done. It is argued here that one source of the problem is that the standard architecture for a contemporary spoken language interface fails to capture the fundamental teleological properties of human spoken language. As a consequence, users have difficulty engaging with such systems, primarily due to a gross mismatch in intentional priors. This paper presents an alternative needs-driven cognitive architecture which models speech-based interaction as an emergent property of coupled hierarchical feedback-control processes in which a speaker has in mind the needs of a listener and a listener has in mind the intentions of a speaker. The implications of this architecture for future spoken language systems are illustrated using results from a new type of ‘intentional speech synthesiser’ that is capable of optimising its pronunciation in unpredictable acoustic environments as a function of its perceived communicative success. It is concluded that such purposeful behavior is essential to the facilitation of meaningful and productive spoken language interaction between human beings and autonomous social agents (such as robots. However, it is also noted that persistent mismatched priors may ultimately impose a fundamental limit on the effectiveness of speech-based human–robot interaction.

Neurosyphilis in Anglo-American Composers and Jazz Musicians.

Science.gov (United States)

Breitenfeld, Darko; Kust, Davor; Breitenfeld, Tomislav; Prpić, Marin; Lucijanić, Marko; Zibar, Davor; Hostić, Vedran; Franceschi, Maja; Bolanča, Ante

2017-09-01

Syphilis is a sexually transmitted, systemic disease caused by the spirochete bacterium Treponema pallidum. The most common mechanism of transmission is sexual intercourse. Although there are several hypotheses, the exact origin of the disease remains unknown. Newly published evidence suggests that the hypothesis supporting the theory of the American origin of the disease is the valid one. Among 1500 analyzed pathographies of composers and musicians, data on ten Anglo-American composers and jazz musicians having suffered from neurosyphilis (tertiary stage of the disease) were extracted for this report. In this group of Anglo-American composers and musicians, most of them died from progressive paralysis while still in the creative phase of life. Additionally, diagnoses of eleven other famous neurosyphilitic composers, as well as basic biographic data on ten less known composers that died from neurosyphilis-progressive paralysis are also briefly mentioned. In conclusion, neurosyphilis can cause serious neurological damage, as well as permanent disability or death, preventing further work and skill improvement.

An Open Architecture Framework for Electronic Warfare Based Approach to HLA Federate Development

Directory of Open Access Journals (Sweden)

HyunSeo Kang

2018-01-01

Full Text Available A variety of electronic warfare models are developed in the Electronic Warfare Research Center. An Open Architecture Framework for Electronic Warfare (OAFEw has been developed for reusability of various object models participating in the electronic warfare simulation and for extensibility of the electronic warfare simulator. OAFEw is a kind of component-based software (SW lifecycle management support framework. This OAFEw is defined by six components and ten rules. The purpose of this study is to construct a Distributed Simulation Interface Model, according to the rules of OAFEw, and create Use Case Model of OAFEw Reference Conceptual Model version 1.0. This is embodied in the OAFEw-FOM (Federate Object Model for High-Level Architecture (HLA based distributed simulation. Therefore, we design and implement EW real-time distributed simulation that can work with a model in C++ and MATLAB API (Application Programming Interface. In addition, OAFEw-FOM, electronic component model, and scenario of the electronic warfare domain were designed through simple scenarios for verification, and real-time distributed simulation between C++ and MATLAB was performed through OAFEw-Distributed Simulation Interface.

FeelSound : Collaborative Composing of Acoustic Music

NARCIS (Netherlands)

Fikkert, Wim; Hakvoort, Michiel; van der Vet, Paul; Nijholt, Anton

2009-01-01

FeelSound is a multi-user application for collaboratively composing music in an entertaining way. Up to four composers can jointly create acoustic music on a top-projection multitouch sensitive table. The notes of an acoustic instrument are represented on a harmonic table and, by drawing shapes on

Usage based indicators to assess the impact of scholarly works: architecture and method

Science.gov (United States)

Bollen, Johan [Santa Fe, NM; Van De Sompel, Herbert [Santa Fe, NM

2012-03-13

Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

A performance analysis of advanced I/O architectures for PC-based network file servers

Science.gov (United States)

Huynh, K. D.; Khoshgoftaar, T. M.

1994-12-01

In the personal computing and workstation environments, more and more I/O adapters are becoming complete functional subsystems that are intelligent enough to handle I/O operations on their own without much intervention from the host processor. The IBM Subsystem Control Block (SCB) architecture has been defined to enhance the potential of these intelligent adapters by defining services and conventions that deliver command information and data to and from the adapters. In recent years, a new storage architecture, the Redundant Array of Independent Disks (RAID), has been quickly gaining acceptance in the world of computing. In this paper, we would like to discuss critical system design issues that are important to the performance of a network file server. We then present a performance analysis of the SCB architecture and disk array technology in typical network file server environments based on personal computers (PCs). One of the key issues investigated in this paper is whether a disk array can outperform a group of disks (of same type, same data capacity, and same cost) operating independently, not in parallel as in a disk array.

Composing Interfering Abstract Protocols

Science.gov (United States)

2016-04-01

Tecnologia , Universidade Nova de Lisboa, Caparica, Portugal. This document is a companion technical report of the paper, “Composing Interfering Abstract...a Ciência e Tecnologia (Portuguese Foundation for Science and Technology) through the Carnegie Mellon Portugal Program under grant SFRH / BD / 33765

Synthetic Adhesive Attachment Discs based on Spider Pyriform Silk Architecture

Science.gov (United States)

Jain, Dharamdeep; Sahni, Vasav; Dhinojwala, Ali

2014-03-01

Among the variety of silks produced by spiders, pyriform silk is used in conjunction with the dragline silk to attach webs to different surfaces. Cob weaver spiders employ different architectural patterns to utilize the pyriform silk and form attachment joints with each pattern having a characteristic adhesive performance. The staple pin architecture is a one of the strongest attachment designs employed by spiders to attach their webs. Here we use a synthetic approach to create the a similar patterned architecture attachment discs on aluminum substrate using thermoplastic polyurethane. Measurable pull off forces are generated when the synthetic discs are peeled off a surface. This innovative adhesive strategy can be a source of design in various biomedical applications. Financial Support from National Science Foundation.

Introduction of an agent-based multi-scale modular architecture for dynamic knowledge representation of acute inflammation.

Science.gov (United States)

An, Gary

2008-05-27

One of the greatest challenges facing biomedical research is the integration and sharing of vast amounts of information, not only for individual researchers, but also for the community at large. Agent Based Modeling (ABM) can provide a means of addressing this challenge via a unifying translational architecture for dynamic knowledge representation. This paper presents a series of linked ABMs representing multiple levels of biological organization. They are intended to translate the knowledge derived from in vitro models of acute inflammation to clinically relevant phenomenon such as multiple organ failure. ABM development followed a sequence starting with relatively direct translation from in-vitro derived rules into a cell-as-agent level ABM, leading on to concatenated ABMs into multi-tissue models, eventually resulting in topologically linked aggregate multi-tissue ABMs modeling organ-organ crosstalk. As an underlying design principle organs were considered to be functionally composed of an epithelial surface, which determined organ integrity, and an endothelial/blood interface, representing the reaction surface for the initiation and propagation of inflammation. The development of the epithelial ABM derived from an in-vitro model of gut epithelial permeability is described. Next, the epithelial ABM was concatenated with the endothelial/inflammatory cell ABM to produce an organ model of the gut. This model was validated against in-vivo models of the inflammatory response of the gut to ischemia. Finally, the gut ABM was linked to a similarly constructed pulmonary ABM to simulate the gut-pulmonary axis in the pathogenesis of multiple organ failure. The behavior of this model was validated against in-vivo and clinical observations on the cross-talk between these two organ systems. A series of ABMs are presented extending from the level of intracellular mechanism to clinically observed behavior in the intensive care setting. The ABMs all utilize cell-level agents