WorldWideScience

Sample records for bascule bridges

  1. Reduction of Impact Noise of Trams on a Major Bridge

    NARCIS (Netherlands)

    Dittrich, M.G.; Bosshaart, C.; Wessels, P.W.

    2015-01-01

    As part of a recent renovation of the Erasmus bridge in Rotterdam, improvements were made to reduce impact noise caused by trams passing a series of rai! joints. The bridge inciudes several different sections inciuding a bascule bridge and is in an inner city tocation with new adjacent apartment bui

  2. Railroad Bridges

    Data.gov (United States)

    Department of Homeland Security — Bridges-Rail in the United States According to The National Bridge Inspection Standards published in the Code of Federal Regulations (23 CFR 650.3), a bridge isA...

  3. Myocardial Bridging

    Directory of Open Access Journals (Sweden)

    Shi-Min Yuan

    2016-02-01

    Full Text Available Abstract Myocardial bridging is rare. Myocardial bridges are most commonly localized in the middle segment of the left anterior descending coronary artery. The anatomic features of the bridges vary significantly. Alterations of the endothelial morphology and the vasoactive agents impact on the progression of atherosclerosis of myocardial bridging. Patients may present with chest pain, myocardial infarction, arrhythmia and even sudden death. Patients who respond poorly to the medical treatment with β-blockers warrant a surgical intervention. Myotomy is a preferred surgical procedure for the symptomatic patients. Coronary stent deployment has been in limited use due to the unsatisfactory long-term results.

  4. Bridge Management Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way.......In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

  5. Programmevaluierung Bridge

    OpenAIRE

    Warta, Katharina; Good, Barbara; Geyer, Anton

    2009-01-01

    BRIDGE is an initiative funded by the Ministry for Transport, Innovation and Technology (BMVIT) that aims to close the “funding gap” between basic and applied research in stand-alone projects with the primary objective of jointly developing the potential of basic and applied research. BRIDGE acts as an  umbrella structure under which the Austrian Science Fund (FWF) and the  Austrian Research Promotion Agency (FFG) coordinate two thematically open funding programmes: The ...

  6. National Bridge Inventory (NBI) Bridges

    Data.gov (United States)

    Department of Homeland Security — The NBI is a collection of information (database) describing the more than 600,000 of the Nation's bridges located on public roads, including Interstate Highways,...

  7. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...... in the Media”, “Audience Interactivity and Participation”, “The Role of Media and ICT Use for Evolving Social Relationships” and “Audience Transformations and Social Integration”. Building Bridges is the result of an ongoing dialogue between the Action and non-academic stakeholders in the field of audience...

  8. Building Bridges

    DEFF Research Database (Denmark)

    The report Building Bridges adresses the questions why, how and for whom academic audience research has public value, from the different points of view of the four working groups in the COST Action IS0906 Transforming Audiences, Transforming Societies – “New Media Genres, Media Literacy and Trust...

  9. Bridged graphite oxide materials

    Science.gov (United States)

    Herrera-Alonso, Margarita (Inventor); McAllister, Michael J. (Inventor); Aksay, Ilhan A. (Inventor); Prud'homme, Robert K. (Inventor)

    2010-01-01

    Bridged graphite oxide material comprising graphite sheets bridged by at least one diamine bridging group. The bridged graphite oxide material may be incorporated in polymer composites or used in adsorption media.

  10. 用于开启桥的轻质环氧沥青混凝土桥面铺装力学性能%Mechanical properties of epoxy asphalt mixture pavement with lightweight aggregate applied on bascule bridge

    Institute of Scientific and Technical Information of China (English)

    刘云; 钱振东; 张磊; 江陈龙

    2012-01-01

    拟定质量替代百分数分别为0%,15%,25%,40%,70%的碎石型陶粒环氧沥青混合料和圆型陶粒环氧沥青混合料,进行高温抗车辙性能、水稳定性及低温弯曲性能试验.采用有限元方法分析开启桥在行车和开启2种状态下的力学响应.最后成型含钢桥面板、防水黏结层及环氧沥青混凝土的复合结构试件来验证2451型环氧沥青黏结料的界面黏结强度.研究结果表明,质量替代百分数分别为0%,15%,25%,40%,70%的陶粒环氧沥青混合料均能满足钢桥面铺装的力学性能要求.替代百分数为70%的圆型陶粒环氧沥青混合料由于其在减轻铺装质量等方面的优势被推荐为开启桥桥面铺装用的首选材料.桥面铺装层间剪应力随着开启角度的增大而增大,并在开启角度达到最大值85°时达到峰值.通过室内试验结果可知,天津响螺湾立转式开启桥在桥面铺装铺筑完成并养生3d后可进行首次开启.

  11. Cable Supported Bridges

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    Cable supported bridges in the form of suspension bridges and cable-stayed bridges are distinguished by their ability to overcome large spans.The book concentrates on the synthesis of cable supported bridges, covering both design and construction aspects. The analytical part covers simple methods...... to quantify the different structural configurations and allows a preliminary optimization of the main structure.Included are the most recent advances in structural design, corrosion protection of cables, aerodynamic safety, and erection procedures....

  12. Taizhou Yangtze River Bridge

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Taizhou Bridge lies between Taizhou, Zhenjiang and Changzhou City in Jiangsu Province. The total length of Taizhou Bridge is 62.088 kin. The whole line is designed by freeway codes with six lanes in two directions. The wholeinvestment is 9.37 billion RMB and the planned construction duration is 5.5 years. The main bridge crossing the Yangtze River is a continuous three-pylon two-span suspension bridge with the main span of 1 080 m. The bridge system is realized for the first time and ranks first in the world until now.

  13. Concrete bridge prioritization system

    OpenAIRE

    Kesselring, Debbie Anne

    1995-01-01

    An alternative method of prioritization for concrete bridge maintenance, repair, and rehabilitation activities is required due to the inability of the current system to manage the increasing nmnber of aging concrete bridges. The Concrete Bridge Prioritization System was proposed because of its ability to address the critical technical parameters of safety and cost benefit in prioritization of funding and work allocation. The analysis includes four parts, service life assessment, s...

  14. Bridging the Gap

    DEFF Research Database (Denmark)

    Kramer Overgaard, Majken; Broeng, Jes; Jensen, Monika Luniewska;

    Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures.......Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures....

  15. Bridging the Gap

    OpenAIRE

    Kramer Overgaard, Majken; Broeng, Jes; Jensen, Monika Luniewska; Murdock, Karen; Schmidt, Iben Julie

    2015-01-01

    Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ventures. Bridging the Gap (BtG) is a 2-year project funded by The Danish Industry Foundation. The goal of Bridging the Gap has been to create a new innovation model which will increase the rate at which Danish universities can spinout new technology ve...

  16. Semiconductor bridge (SCB) detonator

    Science.gov (United States)

    Bickes, Jr., Robert W.; Grubelich, Mark C.

    1999-01-01

    The present invention is a low-energy detonator for high-density secondary-explosive materials initiated by a semiconductor bridge igniter that comprises a pair of electrically conductive lands connected by a semiconductor bridge. The semiconductor bridge is in operational or direct contact with the explosive material, whereby current flowing through the semiconductor bridge causes initiation of the explosive material. Header wires connected to the electrically-conductive lands and electrical feed-throughs of the header posts of explosive devices, are substantially coaxial to the direction of current flow through the SCB, i.e., substantially coaxial to the SCB length.

  17. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated...

  18. The floating water bridge

    International Nuclear Information System (INIS)

    When high voltage is applied to distilled water filled in two glass beakers which are in contact, a stable water connection forms spontaneously, giving the impression of a floating water bridge. A detailed experimental analysis reveals static and dynamic structures as well as heat and mass transfer through this bridge

  19. Bridge technology report

    CERN Document Server

    2013-01-01

    Please note this is a Short Discount publication. As LANs have proliferated, new technologies and system concepts have come to the fore. One of the key issues is how to interconnect networks. One means of interconnection is to use a 'bridge'. Other competing technologies are repeaters, routers, and gateways. Bridges permit traffic isolation, connect network segments together and operate at the MAC layer. Further, because they operate at the MAC layer, they can handle a variety of protocols such as TCP/IP, SNA, and X.25. This report focuses on the specific technology of bridging two netw

  20. Bridged Race Population Estimates

    Data.gov (United States)

    U.S. Department of Health & Human Services — Population estimates from "bridging" the 31 race categories used in Census 2000, as specified in the 1997 Office of Management and Budget (OMB) race and ethnicity...

  1. Long Span Bridges in Scandinavia

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The first Scandinavian bridge with a span of more than 500 m was the Lillebælt Suspension Bridge opened to traffic in 1970.Art the end of the 20th century the longest span of any European bridge is found in the Storebælt East Bridge with a main span of 1624 m. Also the third longest span in Europ...

  2. Integral Abutment and Jointless Bridges

    OpenAIRE

    Cristian-Claudiu Comisu

    2005-01-01

    Integral bridges, or integral abutment and jointless bridges, as they are more commonly known in the USA, are constructed without any movement joints between spans or between spans and abutments. Typically these bridges have stub-type abutments supported on piles and continuous bridge deck from one embankment to the other. Foundations are usually designed to be small and flexible to facilitate horizontal movement or rocking of the support. Integrally bridges are simple or multiple span ones t...

  3. Istanbul Bridge Conference 2014

    CERN Document Server

    Gülkan, Polat; Mahmoud, Khaled

    2016-01-01

      The book includes peer-reviewed contributions selected from presentations given at the Istanbul Bridge Conference 2014, held from August 11 – 13 in Istanbul, Turkey. It reports on the current challenges in bridge engineering faced by professionals around the globe, giving a special emphasis to recently developed techniques, innovations and opportunities. The book covers key topics in the field, including modeling and analysis methods; construction and erection techniques; design for extreme events and condition assessment and structural health monitoring. There is a balanced presentation of theory, research and practice. This book, which provides the readers with a comprehensive and timely reference guide on current practices in bridge engineering, is intended for professionals, academic researchers and students alike.

  4. Active Control of Suspension Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper some recent research on active control of very long suspension bridges, is presented. The presentation is based on research work at Aalborg University, Denmark. The active control system is based on movable flaps attached to the bridge girder. Wind load on bridges with or without...... flaps attached to the girder is briefly presented. A simple active control system is discussed. Results from wind tunnel experiments with a bridge section show that flaps can be used effectively to control bridge girder vibrations. Flutter conditions for suspension bridges with and without flaps...

  5. Quantum Bidding in Bridge

    Science.gov (United States)

    Muhammad, Sadiq; Tavakoli, Armin; Kurant, Maciej; Pawłowski, Marcin; Żukowski, Marek; Bourennane, Mohamed

    2014-04-01

    Quantum methods allow us to reduce communication complexity of some computational tasks, with several separated partners, beyond classical constraints. Nevertheless, experimental demonstrations of this have thus far been limited to some abstract problems, far away from real-life tasks. We show here, and demonstrate experimentally, that the power of reduction of communication complexity can be harnessed to gain an advantage in a famous, immensely popular, card game—bridge. The essence of a winning strategy in bridge is efficient communication between the partners. The rules of the game allow only a specific form of communication, of very low complexity (effectively, one has strong limitations on the number of exchanged bits). Surprisingly, our quantum technique does not violate the existing rules of the game (as there is no increase in information flow). We show that our quantum bridge auction corresponds to a biased nonlocal Clauser-Horne-Shimony-Holt game, which is equivalent to a 2→1 quantum random access code. Thus, our experiment is also a realization of such protocols. However, this correspondence is not complete, which enables the bridge players to have efficient strategies regardless of the quality of their detectors.

  6. Bridge of Light

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Lying gleaming white under a brooding sky,the Lhasa River Railway Bridge forms a gate to Lhasa City.Built as a part of Qinghai-Tibet Railway,on July 1,2011, the highest altitude railway in the world has been in service for five years. Lhasa,Tibet

  7. Bridge over troubled water?

    DEFF Research Database (Denmark)

    Svendsen, Gunnar Lind Haase; Nannestad, Peter; Svendsen, Gert Tinggaard

    2008-01-01

    The problem of integrating non-Western immigrants into Western welfare states is the focus of this paper. To address this issue, we suggest a social capital approach in which we apply the conceptual pair of bridging social capital (BR), which connects an individual to the broader social structure...

  8. Building Bridges to China.

    Science.gov (United States)

    Wasta, Stephanie; Scott, Margaret

    1998-01-01

    Describes a theme cycle called "Building Bridges to China" developed for third grade students that focuses on the similarities between the lives of children and families in China and the United States. Explains that the theme cycle addresses the National Geography Standards and three of the National Council for the Social Studies standards. (CMK)

  9. Revised Rules for Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Jensen, F. M.; Middleton, C.;

    This paper is based on research performed for the Highway Agency, London, UK under the project DPU/9/44 "Revision of Bridge Assessment Rules Based on Whole Life Performance: Concrete Bridges" It contains details of a methodology which can be used to generate Whole Life (WL) reliability profiles....... These WL reliability profiles may be used to establish revised rules for Concrete Bridges....

  10. Dynamic Bridge Response for a Bridge-friendly Truck

    Directory of Open Access Journals (Sweden)

    V. Šmilauer

    2004-01-01

    Full Text Available A truck with controlled semi-active suspensions traversing a bridge is examined for benefits to the bridge structure. The original concept of a road-friendly truck was extended to a bridge-friendly vehicle, using the same optimization tools. A half-car model with two independently driven axles is coupled with simply supported bridges (beam, slab model with the span range from 5 m to 50 m. Surface profile of the bridge deck is either stochastic or in the shape of a bump or a pot in the mid-span. Numerical integration in the MATLAB/SIMULINK environment solves coupled dynamic equations of motion with optimized truck suspensions. The rear axle generates the prevailing load and to a great extent determines the bridge response. A significant decrease in contact road-tire forces is observed and the mid-span bridge deflections are on average smaller, when compared to commercial passive suspensions. 

  11. [Retention of adhesive bridges].

    Science.gov (United States)

    Raes, F; De Boever, J

    1994-04-01

    Since the development of adhesive bridges in the early seventies, the retention and therefore the durability of these bridges has been tremendously improved. Conditioning of the non-precious metal by silanisation, careful acid etching of the enamel and the use of the appropriate composite resin are of prime importance. Furthermore, the meticulous preparation with enough interproximal embrace, occlusal rests, interocclusal clearance and cingulum stops is equally important. Including more teeth in the design does not necessarily lead to an improved retention. Besides the material and technical aspects, the whole clinical procedure needs much attention. The retention does not depend on one single factor, but on the precision of all the necessary clinical steps and on a well-defined selection of the material. In this way a five-year survival rate of close to 80% can be obtained. PMID:11830965

  12. BRIDGING SERVICE QUALITY GAPS

    OpenAIRE

    BARKATH UNISSA

    2012-01-01

    Bridging the Service quality gaps is one of the foremost areas of concern for amarketer. Service marketing is inherently different from product or goods marketing.Services are distinctively characterized by their intangible, heterogeneous, inseparableand perishable nature. The importance of the service sector in today's world is a verywidely accepted and renowned idea. “We are already experiencing a service society“services do have some basic characteristics which make them fundamentally diff...

  13. Bridging as Coercive Accommodation

    CERN Document Server

    Bos, J W; Mineur, A M; Bos, Johan; Buitelaar, Paul; Mineur, Anne-Marie

    1995-01-01

    In this paper we discuss the notion of "bridging" in Discourse Representation Theory as a tool to account for discourse referents that have only been established implicitly, through the lexical semantics of other referents. In doing so, we use ideas from Generative Lexicon theory, to introduce antecedents for anaphoric expressions that cannot be "linked" to a proper antecedent, but that do not need to be "accommodated" because they have some connection to the network of discourse referents that is already established.

  14. Nematic liquid crystal bridges

    Science.gov (United States)

    Doss, Susannah; Ellis, Perry; Vallamkondu, Jayalakshmi; Danemiller, Edward; Vernon, Mark; Fernandez-Nieves, Alberto

    We study the effects of confining a nematic liquid crystal between two parallel glass plates with homeotropic boundary conditions for the director at all bounding surfaces. We find that the free surface of the nematic bridge is a surface of constant mean curvature. In addition, by changing the distance between the plates and the contact angle with the glass plates, we transition between loops and hedgehogs that can be either radial or hyperbolic.

  15. Environmental life cycle assessment comparison between two bridge types: reinforced concrete bridge and steel composite bridge

    DEFF Research Database (Denmark)

    Du, Guangli; Karoumi, Raid

    2013-01-01

    not been integrated into the decision-making process. This paper presents a systematic LCA method for quantifying the environmental impacts for bridges. The comparison study is performed between a reinforced concrete bridge and a steel bridge as an alternative design, with several key maintenance and EOL......The concept of sustainable construction has attracted an increased attention. Bridge infrastructures and their belonged construction activities consume considerable material and energy, which is responsible for large environmental burdens. However, the environmental assessment of bridges has...

  16. Vulnerability of bridges to fire

    DEFF Research Database (Denmark)

    Giuliani, Luisa; Crosti, C.; Gentili, F.

    2012-01-01

    Even if recent effort in developing methodology and measures for design structures against fire and explosions has been mostly focused on buildings, bridges can also be very sensitive to those actions, as witnesses by some recent bridge accidents, which caused major economic losses and also...... endangered people safety in few cases. Purpose of this paper is making a focus on the state of the art of the research and current regulations concerning the response of bridges to fire. Several cases of bridge fires are reported and a focus is made on the occurrence and consequence of bridge fires......, considering both the costs deriving by structural damages and by limited serviceability and other indirect societal aspects. Few cases of recent bridge fire are reviewed in detail and structural consequences are highlighted, distinguishing between damages directly induced by fire and damages induced by local...

  17. Theory of bridge aerodynamics

    CERN Document Server

    Strømmen, Einar

    2006-01-01

    This text book is intended for studies in wind engineering, with focus on the stochastic theory of wind induced dynamic response calculations for slender bridges or other line ?like civil engineering type of structures. It contains the background assumptions and hypothesis as well as the development of the computational theory that is necessary for the prediction of wind induced fluctuating displacements and cross sectional forces. The simple cases of static and quasi-static structural response calculations are for the sake of completeness also included. The text is at an advanced level in the

  18. Modelling railway bridge asset management

    OpenAIRE

    Le, Bryant Linh Hai

    2014-01-01

    The UK has a long history in the railway industry with a large number of railway assets. Railway bridges form one of the major asset groups with more than 35,000 bridges. The majority of the bridge population are old being constructed over 100 years ago. Many of the bridges were not designed to meet the current network demand. With an expected increasing rate of deterioration due to the increasing traffic loads and intensities, the management authorities are faced with the difficult task of k...

  19. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2005-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  20. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2004-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  1. Development of cooperative system bridges

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhe; WAN Qi-bai; SHI Lei

    2008-01-01

    Cooperative system bridges comprise several basic structures that act jointly to improve structural characteristics. We delved into the historical development of cooperative system bridges. Cooperative systems are classified as different-load cooperative systems and same-load cooperative systems by distinguishing the modes of load distribution. For different-load cooperation, individual basic structures are at different positions in the direction along bridge axis and carry the loads separately. While for same-load cooperation, all basic structures overlap in geometrical locations and support the entire loads conjointly. The choosing of span ratios between basic structures, the design of connections of different-load cooperative systems were discussed as well as optimizations of relative rigidity for same-load cooperative systems which greatly influence structural characteristics. The general situation and several structural measurements of several cooperative bridges were demonstrated. This information can assist engineers in developing their concepts in cooperative systems and can lead to more efficient and economical cooperative bridges.

  2. Cascaded resonant bridge converters

    Science.gov (United States)

    Stuart, Thomas A. (Inventor)

    1989-01-01

    A converter for converting a low voltage direct current power source to a higher voltage, high frequency alternating current output for use in an electrical system where it is desired to use low weight cables and other circuit elements. The converter has a first stage series resonant (Schwarz) converter which converts the direct current power source to an alternating current by means of switching elements that are operated by a variable frequency voltage regulator, a transformer to step up the voltage of the alternating current, and a rectifier bridge to convert the alternating current to a direct current first stage output. The converter further has a second stage series resonant (Schwarz) converter which is connected in series to the first stage converter to receive its direct current output and convert it to a second stage high frequency alternating current output by means of switching elements that are operated by a fixed frequency oscillator. The voltage of the second stage output is controlled at a relatively constant value by controlling the first stage output voltage, which is accomplished by controlling the frequency of the first stage variable frequency voltage controller in response to second stage voltage. Fault tolerance in the event of a load short circuit is provided by making the operation of the first stage variable frequency voltage controller responsive to first and second stage current limiting devices. The second stage output is connected to a rectifier bridge whose output is connected to the input of the second stage to provide good regulation of output voltage wave form at low system loads.

  3. Liquid-Bridge Breaking Limits

    Science.gov (United States)

    Macner, Ashley; Steen, Paul

    2011-11-01

    Wet adhesion by liquid bridges in large arrays shows promise for use in lightweight, controllable on-demand devices. Applications include grab/release of wafer substrates, transport of micron-sized tiles for use in 3D printing and micro-dosing of personalized pharmaceutical drugs. By wetting and spreading, a drop can form a bridge and thereby ``grab'' a nearby solid substrate. By volume decrease or extension, the bridge can break. The breaking limit corresponds to bridge instability which can be predicted, knowing the static mechanical response of the bridge. Mechanical behaviors include force-volume (FV), pressure-volume (pV) and force-length (FL) responses. Instability crucially depends on the mode of failure - failure under constant-force or constant length are typical cases. We study single bridge equilibria for their breaking limits. FV diagrams for the pin-pin equal and pin-pin unequal radii boundary conditions for different bridge heights are measured in the laboratory. The FL response in the case of pin-pin equal radii is also measured. Results are compared to predictions of static theory. Static results are then used to compare to dynamical sequences where volume is driven quasistatically by syringe or an electro-osmotic pump. As the breaking limit is approached, the shape deformation accelerates leading to non-equilibrium shapes not captured by the static analysis.

  4. Bridge Creek IMW database - Bridge Creek Restoration and Monitoring Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The incised and degraded habitat of Bridge Creek is thought to be limiting a population of ESA-listed steelhead (Oncorhynchus mykiss). A logical restoration...

  5. National Bridge Inventory - National Geospatial Data Asset (NGDA) Bridges

    Data.gov (United States)

    Department of Transportation — The NBI (NTAD 2015) is a collection of information (database) describing the more than 610,000 of the Nation's bridges located on public roads, including Interstate...

  6. Complex Testing of the Bridges

    Directory of Open Access Journals (Sweden)

    Savić Adrijana

    2016-01-01

    Full Text Available This article describes the process of examining bridges. AB road bridge, founded on the columns by the Karpoš system and damaged due to erosive action of the river, is given as an example. The first tests of the bridge are conducted on the impact load of V 300, because of the appearance of longitudinal cracks. The results of the columns testing are presented in this paper, as well as the rehabilitation measures thus increasing the load capacity of the column.

  7. General design of Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Zhang Xigang; Yuan Hong; Pei Minshan; Dai Jie; Xu Lin

    2009-01-01

    The main span of Sutong Bridge is a double-pylon, double-plane cable-stayed bridge with steel box girder, which has the world's longest central span of 1 088 m within cable-stayed bridges. To overcome problems caused by severe meteorological conditions, perplexing hydrological conditions, deep buried bedrock and higher navigation level, many new technics and methods were created. Keys including structural system, steel box girder, stayed cable, tower, pier, tower foundation, collision avoidance system, wind-resistance, seismic-resistance, structural nonlinear response and structural static stability were presented individually in this paper.

  8. Thermal bridges of modern windows

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Møller, Eva B.; Nielsen, Anker;

    2013-01-01

    With its focus on reduced energy consumption, contemporary housing construction requires a highly insulated and airtight building envelope with as few thermal bridges as possible.Windows must be carefully designed, as thermal bridges can lead to surface condensation or mold growth, even...... if the window has an U-factor of 1 W/(m2·K) or lower. This paper describes the development of modern, energy efficient Danish windows with reduced thermal bridges. It focuses on materials, geometry, and sealing of window panes based on a literature review. Examples of modern windows are presented. Experience...

  9. Reliability Assessment of Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Middleton, C. R.

    This paper is partly based on research performed for the Highways Agency, London, UK under the project DPU/9/44 "Revision of Bridge Assessment Rules Based on Whole Life Performance: concrete bridges". It contains the details of a methodology which can be used to generate Whole Life (WL) reliability...... profiles. These WL reliability profiles may be used to establish revised rules for concrete bridges. This paper is to some extend based on Thoft-Christensen et. al. [1996], Thoft-Christensen [1996] et. al. and Thoft-Christensen [1996]....

  10. The Higgs Bridge

    CERN Document Server

    Allen, Roland E

    2013-01-01

    The particle recently discovered at the Large Hadron Collider near Geneva is almost certainly a Higgs boson, the long-sought completion of the Standard Model of particle physics. But this discovery, an achievement by more than six thousand scientists (including students), is actually much more than a mere capstone of the Standard Model. It instead represents a bridge from the Standard Model to exciting discoveries of the future, at higher energies or in other experiments, and to the properties of matter at very low temperatures. The mere existence of a particle with zero spin implies a need for new physics, with the most likely candidate being supersymmetry, which requires that every known particle has a superpartner yet to be discovered. And phenomena similar to the Higgs are seen in superconducting metals and superfluid gases at low temperatures, which extend down to a millionth or even a billionth of a degree Kelvin. So the discovery of a Higgs boson has a central place in our attempts both to achieve a tr...

  11. Mineral bridges in nacre revisited

    CERN Document Server

    Checa, Antonio G; Willinger, Marc-Georg

    2012-01-01

    We confirm with high-resolution techniques the existence of mineral bridges between superposed nacre tablets. In the towered nacre of both gastropods and the cephalopod Nautilus there are large bridges aligned along the tower axes, corresponding to gaps (150-200 nm) in the interlamellar membranes. Gaps are produced by the interaction of the nascent tablets with a surface membrane that covers the nacre compartment. In the terraced nacre of bivalves bridges associated with elongated gaps in the interlamellar membrane (> 100 nm) have mainly been found at or close to the edges of superposed parental tablets. To explain this placement, we hypothesize that the interlamellar membrane breaks due to differences in osmotic pressure across it when the interlamellar space below becomes reduced at an advanced stage of calcification. In no cases are the minor connections between superimposed tablets (< 60 nm), earlier reported to be mineral bridges, found to be such.

  12. Simulation of multivariate diffusion bridges

    DEFF Research Database (Denmark)

    Bladt, Mogens; Finch, Samuel; Sørensen, Michael

    We propose simple methods for multivariate diffusion bridge simulation, which plays a fundamental role in simulation-based likelihood and Bayesian inference for stochastic differential equations. By a novel application of classical coupling methods, the new approach generalizes a previously...

  13. Applications of overburden conveyor bridges

    Energy Technology Data Exchange (ETDEWEB)

    Schachtschneider, H.

    1987-06-01

    In large scale surface mines of the capacities required today, a cross-pit operation with overburden conveyor bridges is the most economical method of overburden removal and disposal. In order to provide the production capacity required in surface mining equipment by the GDR brown coal industry, VEB Schwermaschinenbau Lauchhammerwerk undertook the design and manufacture of standard overburden conveyor bridges for cut heights of 34 m, 45 m and 60 m. All three base types may be equipped to match the site specific geological and geotechnical conditions, and to meet customer's demands. Specifications of the bridges are given as well as details of conveyor belt speeds, modifications to the standards, and number manufactured. Design problems faced with the 60 m bridge are discussed, together with details of the superstructure, method of operation, transportation rates, structural steel used, assembly and power supply. 5 refs.

  14. Bridge Culture of Langde Village

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Langde, a village in Leishan County ofsouthwestern Guizhou province, is known for itslarge number of unique bridges bearing the distinctdesign style of the Miao ethnic group. Animpressive variety of well-preserved ancient

  15. ANGIOGRAPHIC ASPECTS OF MYOCARDIAL BRIDGES

    Directory of Open Access Journals (Sweden)

    Sujatha. M

    2015-12-01

    Full Text Available Introduction: The segment of epicardial coronary artery that traverses intramurally through the myocardium and bridged by a bunch of cardiac muscle fibers is called tunneled artery or intramural artery. The band of cardiac muscle fibers passing over the tunneled artery segment is named as myocardial bridge. During angiography milking effect is observed during systole due to the external pressure of muscle fibers on the tunneled artery that leads to narrowing of vessel lumen and further ischemia. Materials & Methods: It is a prospective study performed from 2012- 2015 in cardiac centers available around Tirupati, Andhra Pradesh, South India. A total number of 2015 adult patients who underwent diagnostic coronary angiography were evaluated to detect myocardial bridges. With the informed consent the relevant data was collected from the patients and analyzed. Results: The prevalence of myocardial bridges was 3.17%. Among the 2015 patients 70.7% are males and 29.2% are females. Among 64 myocardial bridge positive cases 62.5% were male and 37.5% were female patients. Regarding coronary dominance 84% were right dominant and 14.4% were left dominant and 1.6% are balanced. The percentage incidence of myocardial bridging according to dominance was 3.01% for right dominant patients, 4.12% for left dominant patients and 3.1% for balanced dominant patients. In all the myocardial bridge positive cases they were located on the left anterior descending artery (LAD. According to diagnosis the patients with normal coronaries were 22.6%, patients with MILD CAD were 17.9%, patients with single vessel disease were 23.4%, patients with two vessel disease were 14.7% and the patients with triple vessel disease were 21.3%. The 64 myocardial bridging cases were grouped in to three groups according to their age. Incidence of double bridges was observed in 3 cases of which 66.7% males & 33.3% in females. Conclusion: These results show that Andhra Pradesh population are

  16. The stories of two bridges in Ghana

    DEFF Research Database (Denmark)

    Andreasen, Jørgen

    2004-01-01

    Public participation in bridge building was promoted by un habitat in the village of Mankrong. The neighbouring village did not participate in the construction of their bridge. The first flooding washed the second bridge down while the "participative bridge" stood up....

  17. An Expert System for Concrete Bridge Management

    DEFF Research Database (Denmark)

    Brito, J. de; Branco, F. A.; Thoft-Christensen, Palle;

    1997-01-01

    The importance of bridge repair versus new bridge construction has risen in recent decades due to high deterioration rates that have been observed in these structures. Budgets both for building new bridges and keeping the existing ones are always limited. To help rational decision-making, bridge...

  18. Stability of liquid crystalline bridges

    Science.gov (United States)

    Mahajan, Milind P.; Tsige, Mesfin; Taylor, P. L.; Rosenblatt, Charles

    1999-02-01

    The stability of cylindrical bridges of the liquid crystal octylcyanobiphenyl in an immiscible liquid bath was investigated in the nematic and smectic A phases. In the nematic phase the bridge was found to destabilize at a length-to-diameter (slenderness) ratio R similar to that of ordinary Newtonian fluids. On the other hand, the Bingham behavior of the smectic A phase, i.e., an apparent yield stress, enabled the formation of stable columns with R well in excess of π.

  19. Floating liquid bridge charge dynamics

    Science.gov (United States)

    Teschke, Omar; Soares, David Mendez; Gomes, Whyllerson Evaristo; Valente Filho, Juracyr Ferraz

    2016-01-01

    The interaction of liquid with electric fields is investigated in a configuration where up to 13 kV are applied between electrodes resulting in a 106 V/m electric field in the capillaries and where there is the formation of a free-standing fluid bridge in the interelectrode gap. The Mott-Gurney equation was fitted to the measured ionization current vs applied voltage curve which indicates that the ionization rate at the high-voltage anode electrode dimethylsulfoxide (DMSO) interface and space charging in the interelectrode gap determine the floating liquid bridge current for a given cathode-to-anode voltage. Space charge effects were measured in the cathode becker and also at the liquid bridge since the ionized charges at the anode migrate to the bridge outer surface and decrease the interfacial tension from 43 mJ/m2 to 29 mJ/m2. Two distinct structural regions then form the bridge, a charged plastic (bulk modulus ˜100 MPa) conducting outer layer with a surface conductivity of ˜10-9 Ω-1, which shapes and supports the floating fluid structure, and an inner liquid cylinder, where DMSO molecules flow.

  20. A strange bridge by Leonardo

    CERN Document Server

    Huylebrouck, Dirk

    2013-01-01

    On folio 855 recto of the Codex Atlanticus, Leonardo da Vinci drew three 'easily movable' bridges, but one of them is enigmatic: all 'replicas' in Leonardo museums and exhibitions come as a surprise, to say the least, to any engineer or architect whose attention is drawn to it. This is the case for models in Amboise (France), Chicago and Portland (USA), Florence (Italy) and for the one of the traveling exhibition by the Australian company 'Grande Exhibitions' that already visited 40 major cities in the world. All 'replicas' of the bridge model attributed to Leonardo have pillars standing on the deck of the bridge, while the deck is suspended by cables attached on these pillars. At first sight this problem does not catch the attention of the observer, as the bridge seems to be a mixed form of a beam and a suspension bridge, but it was not overlooked by my colleague architect-engineer Dr. Laurens Luyten (Gent, Belgium). Yet, after a TV-interview in Brussels so much pressure was exerted by some of the museum col...

  1. Bridging history and social psychology

    DEFF Research Database (Denmark)

    Glaveanu, Vlad Petre; Yamamoto, Koji

    2012-01-01

    This special issue aims to bridge history and social psychology by bringing together historians and social psychologists in an exercise of reading and learning from each other’s work. This interdisciplinary exercise is not only timely but of great importance for both disciplines. Social...... hand historians can enhance their analysis of historical sources by drawing upon the conceptual tools developed in social psychology. They can “test” these tools and contribute to their validation and enrichment from completely different perspectives. Most important, as contributions to this special......-traditionalized societies—a distinction that lies at the heart of many social psychology accounts of the world we live in. The present editorial will introduce and consider this act of bridging history and social psychology by focusing on three main questions: What is the bridge made of? How can the two disciplines...

  2. Excitation Methods for Bridge Structures

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, C.R.; Duffy, T.A.; Cornwell, P.J.; Doebling, S.W.

    1999-02-08

    This paper summarizes the various methods that have been used to excited bridge structures during dynamic testing. The excitation methods fall into the general categories of ambient excitation methods and measured-input excitation methods. During ambient excitation the input to the bridge is not directly measured. In contrast, as the category label implies, measured-input excitations are usually applied at a single location where the force input to the structure can be monitored. Issues associated with using these various types of measurements are discussed along with a general description of the various excitation methods.

  3. Bridge Number and Conway Products

    OpenAIRE

    Blair, Ryan C.

    2007-01-01

    Schubert proved that, given a composite link $K$ with summands $K_{1}$ and $K_{2}$, the bridge number of $K$ satisfies the following equation: $$\\beta(K)=\\beta(K_{1})+\\beta(K_{2})-1.$$ In ``Conway Produts and Links with Multiple Bridge Surfaces", Scharlemann and Tomova proved that, given links $K_{1}$ and $K_{2}$, there is a Conway product $K_{1}\\times_{c}K_{2}$ such that $$\\beta(K_{1}\\times_{c} K_{2}) \\leq \\beta(K_{1}) + \\beta(K_{2}) - 1$$ In this paper, we define the generalized Conway prod...

  4. Optimum selection on bridge erection with floating crane in East China Sea Bridge and Hangzhou Bay Bridge

    Institute of Scientific and Technical Information of China (English)

    Shunquan Qin; Pu Zhou; Youheng Hua

    2004-01-01

    @@ Introduction With the rapid development of China′s economy, many bridges will be built over the Chinese coastal waters of Pacific Ocean. Among them, construction of East China Sea Bridge has been commenced in June 2001, and will be completed at the end of 2005, Hangzhou Bay Bridge was also started to construct in June 2003(Fig. 1). These two ultralong bridges are designed as twin expressway bridges standing side by side each carries a 3-lane one-way carriageway. The total width is 31.5m and 33.0m respectively. East China Sea Bridge starts from Nanhui District, Shanghai and extends to the Yangshan Deep Water Port Area, which is located at one of the Qiqu Islands. The total length of the bridge is about 31.0 km, in which 25 km are on the sea, and 22 km is in the unnavigable region. Hangzhou Bay Bridge across the mouth of Qiantang River.

  5. Is myocardial bridging a bridge connecting to cardiovascular events?

    Institute of Scientific and Technical Information of China (English)

    LI Jian-jun

    2010-01-01

    @@ Coronary arteries and their major branches usually course on the surface of the heart in the subepicardial tissue. However, a muscle hber overlying the intramyocardial segment of an epicardial coronary artery was defined as myocardial bridging (MB), and subsequently the artery coursing within the myocardium is called a tunneled artery.

  6. Architectural engineering of FRP bridges

    OpenAIRE

    Smits, J.E.P.

    2014-01-01

    This paper deals with the use of Fibre Reinforced Polymers (FRP's) in architectural and structural bridge design. The challenges and opportunities that come with this relatively new material are discussed. An inventory is made of recent engineers' solutions in FRP, followed by a discussion on architectural application of FRP's derived from the authors architectural practice.

  7. Instability of the capillary bridge

    Science.gov (United States)

    Pare, Gounseti; Hoepffner, Jerome

    2014-11-01

    Capillary adhesion is a physical mechanism that maintains two bodies in contact by capillarity through a liquid ligament. The capillary bridge is an idealization of this capillary adhesion. In this study we first focus on the classical case of the stability of the capillary bridge. Secondly we study a slightly more complex configuration, imagining a flow in the capillary bridge as in the case of the dynamics of the neck of a liquid ligament, in its withdrawal under the effect of capillarity. Inspired by the experiments on soap films of Plateau, the configuration analyzed consists of an initially axisymmetric, mass of fluid held by surface tension forces between two parallel, coaxial, solid pipes of the same diameter. The results presented are obtained by numerical simulations using the free software, Gerris Flow Solver. We first focus on the capillary Venturi. In the static configuration the stability diagram of the capillary bridge obtained is in perfect agreement with the results of Lev A. Slobozhanin. In the dynamic case we develop a matlab code based on the one dimensional equations of Eggers and Dupont. The comparison of the bifurcation diagram obtained and the numerical simulations shows a good agreement.

  8. Bridge Aesthetics and Structural Honesty

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1999-01-01

    In bridges the overall form must be chosen with due respect to the transmission of forces if efficient structures shall be created, The design must therefore be governed by experienced structural engineers - in some cases assisted by aesthetic advisers on specific issues. Some basic requirements...

  9. The Wien Bridge Oscillator Family

    DEFF Research Database (Denmark)

    Lindberg, Erik

    2006-01-01

    A tutorial in which the Wien bridge family of oscillators is defined and investigated. Oscillators which do not fit into the Barkhausen criterion topology may be designed. A design procedure based on initial complex pole quality factor is reported. The dynamic transfer characteristic...

  10. Architectural engineering of FRP bridges

    NARCIS (Netherlands)

    Smits, J.E.P.

    2014-01-01

    This paper deals with the use of Fibre Reinforced Polymers (FRP's) in architectural and structural bridge design. The challenges and opportunities that come with this relatively new material are discussed. An inventory is made of recent engineers' solutions in FRP, followed by a discussion on archit

  11. Intercellular bridges in vertebrate gastrulation.

    Directory of Open Access Journals (Sweden)

    Luca Caneparo

    Full Text Available The developing zebrafish embryo has been the subject of many studies of regional patterning, stereotypical cell movements and changes in cell shape. To better study the morphological features of cells during gastrulation, we generated mosaic embryos expressing membrane attached Dendra2 to highlight cellular boundaries. We find that intercellular bridges join a significant fraction of epiblast cells in the zebrafish embryo, reaching several cell diameters in length and spanning across different regions of the developing embryos. These intercellular bridges are distinct from the cellular protrusions previously reported as extending from hypoblast cells (1-2 cellular diameters in length or epiblast cells (which were shorter. Most of the intercellular bridges were formed at pre-gastrula stages by the daughters of a dividing cell maintaining a membrane tether as they move apart after mitosis. These intercellular bridges persist during gastrulation and can mediate the transfer of proteins between distant cells. These findings reveal a surprising feature of the cellular landscape in zebrafish embryos and open new possibilities for cell-cell communication during gastrulation, with implications for modeling, cellular mechanics, and morphogenetic signaling.

  12. Dynamic identification of paradela historic railway bridge

    OpenAIRE

    Ramos, Luís F.; Valente, Isabel; Guimarães, Paulo; Vazquez, Kevin; Lourenço, Paulo B.

    2013-01-01

    Paradela Bridge is a metallic bridge located along the bank of the Tua River in northern Portugal. While the bridge is not currently in service, its structure is representative of many metallic truss structures built across the country between the 19th and the 20th century. The construction of the Paradela Bridge was completed in 1886 and served for about 120 years connecting northern Portugal. Tua Line belongs to the Douro area that UNESCO recently declared as world heritage. This work acqui...

  13. Transition Slabs of Integral Abutment Bridges

    OpenAIRE

    Dreier, Damien; Muttoni, Aurelio; BURDET, Olivier

    2011-01-01

    Over the past decades, an increasing number of bridges with integral abutment have been built in Switzerland. This type of bridge offers various advantages over standard bridges with abutments, equipped with expansion joints and bearings that require regular inspection and maintenance. One main concern of integral abutment bridges is related to the soil-structure interaction, in particular between the transition slab and the embankment. To avoid any expansion joints, transition slabs are dire...

  14. Path transformations of first passage bridges

    OpenAIRE

    Bertoin, Jean

    2003-01-01

    We define the first passage bridge from 0 to $\\lambda$ as the Brownian motion on the time interval $[0,1]$ conditioned to first hit $\\lambda$ at time 1. We show that this process may be related to the Brownian bridge, the Bessel bridge or the Brownian excursion via some path transformations, the main one being an extension of Vervaat's transformation. We also propose an extension of these results to certain bridges with cyclically exchangeable increments.

  15. 47 CFR 80.331 - Bridge-to-bridge communication procedure.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Bridge-to-bridge communication procedure. 80..., Alarm, Urgency and Safety Procedures § 80.331 Bridge-to-bridge communication procedure. (a) Vessels... position). I plan to (give proposed course of action). Over. (3) (Coast station), this is (vessel's...

  16. Removal of failed crown and bridge.

    Science.gov (United States)

    Sharma, Ashu; Rahul, G R; Poduval, Soorya T; Shetty, Karunakar

    2012-07-01

    Crown and bridge have life span of many years but they fail for a number of reasons. Over the years, many devices have been designed to remove crowns and bridges from abutment teeth. While the removal of temporary crowns and bridges is usually very straightforward, the removal of a definitive cast crown with unknown cement is more challenging. Removal is often by destructive means. There are a number of circumstances, however, in which conservative disassembly would aid the practitioner in completing restorative/endodontic procedures. There are different mechanisms available to remove a failed crown or bridge. But there is no information published about the classification of available systems for crown and bridge removal. So it is logical to classify these systems into different groups which can help a clinician in choosing a particular type of system depending upon the clinical situation. The aim of this article is to provide a classification for various crown and bridge removal systems; describe how a number of systems work; and when and why they might be used. A PubMed search of English literature was conducted up to January 2010 using the terms: Crown and bridge removal, Crown and bridge disassembly, Crown and bridge failure. Additionally, the bibliographies of 3 previous reviews, their cross references as well as articles published in various journals like International Endodontic Journal, Journal of Endodontics and were manually searched. Key words:Crown and bridge removal, Crown and bridge disassembly, Crown and bridge failure. PMID:24558549

  17. Remediation: Higher Education's Bridge to Nowhere

    Science.gov (United States)

    Complete College America, 2012

    2012-01-01

    The intentions were noble. It was hoped that remediation programs would be an academic bridge from poor high school preparation to college readiness. Sadly, remediation has become instead higher education's "Bridge to Nowhere." This broken remedial bridge is travelled by some 1.7 million beginning students each year, most of whom will…

  18. Comparison between Modern Violin Bridge and Baroque Violin Bridge by Photoelastic Observation and Frequency Analysis

    Science.gov (United States)

    Matsutani, Akihiro

    2004-05-01

    A comparison between the modern bridge and the baroque bridge of the violin by photoelastic observation was carried out. The relationship between the stress part and the hole is symmetric in the modern and baroque bridges. The measured spectral envelopes of baroque bridges are similar to those of modern bridges in D- or G-strings, and have peaks at a frequency higher than those of modern bridges in E-string. The visualization method as used in this study may provide hints for the design of violin bridges.

  19. Comprehensive Real-Time Bridge Health Monitoring System of Tongtai Bridge

    OpenAIRE

    Lei Su-su; Gao Yong-tao; Pan Dan-guang

    2015-01-01

    Tongtai Bridge is the world’s largest suspension curve-girder-skew-arch bridge, which is located in Zhangjiakou, China. The understanding of mechanics characteristics is limited to such complex bridges, so it is necessary to establish reliable health monitoring system to investigate the static and dynamic responses and monitor the safety of the bridge. A comprehensive real-time bridge health monitoring system is establish, which includes four aspects: sensor system, data acquisition and trans...

  20. New Concept for Durable Concrete Bridges

    OpenAIRE

    Damek, Marek

    2015-01-01

    This master’s thesis covers the design of a post-tensioned concrete bridge in Trondheim municipality in Norway, in collaboration with Statens vegvesen (SVV). The concept of the bridge is inspired by Egg-Graben-Brücke in Austria, which was designed and built without steel reinforcement in the bridge deck. The idea is to eliminate steel reinforcement which can corrode in the bridge deck. The total length of the bridge is 73 meters and it is divided into 3 spans. The crosssection ...

  1. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    Vibration of a bridge structure due to the passage of vehicles is an important consideration in the design of bridges. Further, a common problem in bridge engineering practice in these years is the upgrading of minor highway bridges (=5-20 m) to carry heavier loads partly due to a tendency...... of heavier trucks moving at larger speeds, and partly because the authorities want to permit transportation of special heavy goods at a larger part of the road net. These needs will in many cases cause the strengthening of the bridges becomes necessary. In order to keep the expenses of such strengthening...... the results obtained using the numerical models given in details in "Heavy Vehicles on Minor Highway Bridges : dynamic modelling of vehicles and bridges". The models are established using a ordinary vehicle which consists of a 48 t Scania with a 3 axle tractor and a 3 axle trailer, joined in a flexible hinge...

  2. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    Vibration of a bridge structure due to the passage of vehicles is an important consideration in the design of bridges. Further, a common problem in bridge engineering practice in these years is the upgrading of minor highway bridges (=5-20 m) to carry heavier loads partly due to a tendency...... of heavier trucks moving at larger speeds, and partly because the authorities want to permit transportation of special heavy goods at a larger part of the road net. These needs will in many cases cause the strengthening of the bridges becomes necessary. In order to keep the expenses of such strengthening...... the numerical models for the mathematical models of the vehicles and the bridge from which the load amplification factors can be estimated assuming that the dynamic parameters of the vehicles and the modal parameters of the bridge are known....

  3. Full-bridge capacitive extensometer

    Science.gov (United States)

    Peters, Randall D.

    1993-08-01

    Capacitive transducers have proven to be very effective sensors of small displacements, because of inherent stability and noninvasive high resolution. The most versatile ones have been those of a differential type, in which two elements are altered in opposite directions in response to change of the system parameter being monitored. Oftentimes, this differential pair has been incorporated into a bridge circuit, which is a useful means for employing synchronous detection to improve signal to noise ratios. Unlike previous differential capacitive dilatometers which used only two active capacitors, the present sensor is a full-bridge type, which is well suited to measuring low-level thermal expansions. This analog sensor is capable of 0.1 μm resolution anywhere within a range of several centimeters, with a linearity of 0.1%. Its user friendly output can be put on a strip chart recorder or directed to a computer for sophisticated data analysis.

  4. Noise Considerations in Resistance Bridges

    DEFF Research Database (Denmark)

    Diamond, Joseph M.

    1963-01-01

    thermometry, where the noise in the unknown resistor will predominate strongly. An impedance step-up device (transformer or tuned circuit) is valuable in raising the bridge signal and noise level above the noise of the first amplifier tube. However, as the step-up ratio is increased, two counterfactors appear......, namely, noise in the loss resistance of the step-up device, and grid current noise. There is therefore an optimum step-up ratio, which has been found. The step-up device is permitted to have a different temperature from the unknown and standard resistors, to evaluate the advantage of cooling it....... With certain assumptions about the noise and grid current of the first tube it is found that the equivalent temperature of a unity ratio (Mueller) bridge used for liquid helium measurements may be 400°K....

  5. Stability of Axisymmetric Liquid Bridges

    CERN Document Server

    Rubinstein, Boris

    2016-01-01

    We study stability of axisymmetric liquid bridges between two axisymmetric solid bodies in the absence of gravity under arbitrary asymmetric perturbations which are expanded into a set of angular Fourier modes. We determine the stability region boundary for every angular mode in case of both fixed and free contact lines. Application of this approach allows us to demonstrate existence of stable convex nodoid menisci between two spheres.

  6. 2015 Bridge Inspection ERC Training

    OpenAIRE

    Dougherty, Merril

    2015-01-01

    This presentation will discuss recent changes to the County Bridge Inspection Program from the perspective of both the FHWA and INDOT. We will also discuss the responsibilities of the local public agency’s (LPA’s) employee in responsible charge (ERC) with respect to managing this program. As this course is a yearly requirement, all county ERCs are encouraged to attend. Pre-registering is strongly encouraged by e-mailing your contact information to .

  7. The Bridge Program - Participant Perspectives

    OpenAIRE

    Rönnqvist, Riitta; Hakonen, Anu; Vartiainen, Matti

    2015-01-01

    The Nokia Bridge Program was established in summer 2011 in order to "make the best of the restructuring: create meaningful opportunities for individuals and local economies impacted by workforce reductions" and to "assist individuals in re-employment". This document reports whether and how the program helped individuals avoid the known negative effects of job loss and find meaningful re-employment. The document also reports how affected employees formed perceptions about Nokia´s fairness and ...

  8. Inspection Strategies for Concrete Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    1989-01-01

    In this paper an optimal inspection strategy for concrete bridges based on periodic routine and detailed inspections is presented. The failure mode considered is corrosion of the reinforcement due to chlorides. A simple modelling of the corrosion and of the inspection strategy is presented....... The optimal inspection strategy is determined from an optimization problem, where the design variables are time intervals between detailed inspections and the concrete cover. The strategy is illustrated on a simple structure, namely a reinforced concrete beam....

  9. Parabolic metamaterials and Dirac bridges

    Science.gov (United States)

    Colquitt, D. J.; Movchan, N. V.; Movchan, A. B.

    2016-10-01

    A new class of multi-scale structures, referred to as `parabolic metamaterials' is introduced and studied in this paper. For an elastic two-dimensional triangular lattice, we identify dynamic regimes, which corresponds to so-called `Dirac Bridges' on the dispersion surfaces. Such regimes lead to a highly localised and focussed unidirectional beam when the lattice is excited. We also show that the flexural rigidities of elastic ligaments are essential in establishing the `parabolic metamaterial' regimes.

  10. Severe ASR damaged concrete bridges

    DEFF Research Database (Denmark)

    Antonio Barbosa, Ricardo; Gustenhoff Hansen, Søren

    2015-01-01

    Technical University of Denmark (DTU) and University of Southern Denmark (SDU) have conducted several full-scale experiments with severe ASR deteriorated bridges. This paper presents few and preliminary results from both the shear tests and the measuring of the material properties. The shear test...... show that the shear capacity is almost unaffected of ASR despite significant reduction in compressive concrete strength. Furthermore, measurements show a significant tensile reinforcement strain developed due to ASR expansion....

  11. Halliburton Composite Bridge Plug Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Starbuck, J.M.; Luttrell, C.R.; Aramayo, G.

    2005-01-15

    The overall objectives of this CRADA were to assist Halliburton in analyzing a composite bridge plug and to determine why their original design was failing in the field. In Phase 1, finite element analyses were done on the original composite slip design and several alternative designs. The composite slip was the component in the bridge plug that was failing. The finite element code ABAQUS was used for these calculations and I-DEAS was used as the pre- and post-processor in the analyses. Several different designs and materials were analyzed and recommendations were made towards improving the design. In Phase 2, the objective was to develop finite element models that would accurately represent the deformations in the entire all-composite 4-1/2' diameter bridge plug assembly. The finite element code LS-DYNA was used and the results from this effort were intended to expand Halliburton's composite design and analysis capabilities with regard to developing future composite components for downhole tools. In addition to the finite element modeling, this effort involved the utilization of micromechanics to determine the necessary composite material properties that were needed as input for finite element codes.

  12. Nondestructive evaluation techniques for enhanced bridge inspection

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, G.; Benson, S.; Durbin, P.; Del Grande, N.; Haskins, J.; Brown, A.; Schneberk, D.

    1993-10-01

    Nondestructive evaluation of bridges is a critical aspect in the US aging infrastructure problem. For example in California there are 26,000 bridges, 3000 are made of steel, and of the steel bridges, 1000 are fracture critical. California Department of Transportation (Caltrans), Federal Highway Administration, and Lawrence Livermore National Laboratory (LLNL) are collaborating to develop and field NDE techniques to improve bridge inspections. We have demonstrated our NDE technologies on several bridge inspection applications. An early collaboration was to ultrasonically evaluate the steel pins in the E-9 pier on the San Francisco Bay Bridge. Following the Loma-Prieta earthquake in 1989 and the road way collapse at the E-9 pier, a complete nondestructive evaluation was conducted by Caltrans inspectors and several ultrasonic indications were noted. LLNL worked with Caltrans to help identify the source of these reflections. Another project was to digitally enhance high energy radiographs of bridge components such as cable end caps. We demonstrated our ability to improve the detection of corrosion and fiber breakage inside the end cap. An extension of this technology is limited view computer tomography (CT). We implemented our limited view CT software and produced cross-sectional views of bridge cables from digitized radiographic films. Most recently, we are developing dual band infrared imaging techniques to assess bridge decks for delaminations. We have demonstrated the potential of our NDE technology for enhancing the inspection of the country`s aging bridges.

  13. Study on structural system of Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Zhang Xigang; Pei Minshan; Yuan Hong; Xu Liping; Zhu Bin

    2009-01-01

    Sutong Bridge, whose layout is [ (100 + 100 + 300) + 1 088 + ( 300 + 100 + 100) ] m, marks the largest span of cable-stayed bridges in the world. The complex natural condition at the bridge site and the strict requirements for resistance of wind and seismic action make it crucial to choose a favorable structural system to assure the function and safety of the bridge. The comparison among several optional structural systems for Sutong Bridge is illustrated. After detailed analysis is carried out for viscous damper and hydraulic buffer, super liquid viscous damper with additional displacement limitation is designed for the first application in bridge engineering. The parameters for the damper is analyzed and studied and the dampers are installed suecessfuUy after quality tests.

  14. Evaluation method research on prestressed concrete bridges

    Institute of Scientific and Technical Information of China (English)

    HUANG Qiao; LIN Yang-zi; REN Yuan

    2008-01-01

    Considering the construction features of prestressed concrete bridge, the comprehensive evaluation method about the bridge damage conditions are studied. Particular attentions are paid on establishing a multi-level evaluation model for damaged prestressed concrete bridge, and the evaluation indices of the model as well as the rating standards are defined in the model. A normal relative function about the evaluation indices of each element is developed to calculate the relative degree, and for each element which is no sub-level elements. When evaluating the elements in sub-item level or index level of the model, the weights of elements that are pertained to one element are adopted, taking account of their deterioration degree. At the same time, the dam-age conditions of bridge are characterized by relative degree, element evaluation scale and structural technology mark of bridge ,so it agrees with Code for Maintenance of Highway Bridges and Culvers.

  15. Seismic Evaluation of Highway Bridges - Phase 1

    OpenAIRE

    Ramirez, J.A.; Pan, Austin D.; Mwakasisi, Frank Thompson

    1996-01-01

    The primary objective of the study was to establish the guidelines for screening, assessing, and ranking Indiana bridges for seismic upgrade. The outcome of the study is a complete strategy for the detailed structural assessment of Indiana highway bridges subjected to seismic forces. The structural evaluation is conducted using a nonlinear time-history analysis of the bridge for simulated or actual records. The specific soil conditions at the site are accounted in terms of the ground motio...

  16. REPORT: BioMedBridges standards workshop

    OpenAIRE

    Conte, Nathalie; Hancocks, Tom; Suhr, Stephanie

    2014-01-01

    This workshop, co-organized by BioMedBridges WP3 and 12, was held on 24-25 June and hosted by BioMedBridges partners at VUMC in Amsterdam. Attendees included BioMedBridges personnel, members from the ESFRI BMS research infrastructures and invited external experts from existing standards organisations. The following aspects of data standardisation were explored: Defining entity identifiers and identifiers best practice Development of a Meta models and Mappings Registry for bio...

  17. Analysis of liquid bridge between spherical particles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A pair of central moving spherical particles connected by a pendular liquid bridge with interstitial Newtonian fluid is often encountered in pariculate coalescence process. In this paper, by assuming perfect-wet condition, the effects of liquid volume and separation distance on static liquid bridge are analyzed, and the relation between rupture energy and liquid bridge volume is also studied. These points would be of significance in industrial processes related to adhesive particles.

  18. Bridge engineering handbook construction and maintenance

    CERN Document Server

    Chen, Wai-Fah

    2014-01-01

    Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject.Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes c

  19. Markovian Bridges: Weak continuity and pathwise constructions

    OpenAIRE

    Chaumont, Loïc; Uribe Bravo, Gerónimo

    2009-01-01

    A Markovian bridge is a probability measure taken from a disintegration of the law of an initial part of the path of a Markov process given its terminal value. As such, Markovian bridges admit a natural parameterization in terms of the state space of the process. In the context of Feller processes with continuous transition densities, we construct by weak convergence considerations the only versions of Markovian bridges which are weakly continuous with respect to their parameter. We use this ...

  20. Life Cycle Assessment of a Norwegian Bridge

    OpenAIRE

    Dequidt, Thomas Charles Edouard

    2012-01-01

    Life cycle assessment (LCA) methodology aims at evaluating the environmental impacts of a product or system from a holistic approach. In this methodology, all life cycle phases of the product are identified and assessed, from the raw material acquisition to the end-of-life phase. This master thesis is dealing with the LCA of a Norwegian bridge. First, a literature review is realized by going through 14 bridge LCA references. Then, a detailed description of bridge LCA methodology ...

  1. Bridge Engineering-Oriented Parametric Model

    Institute of Scientific and Technical Information of China (English)

    周凌远; 李乔

    2004-01-01

    A new model is proposed to improve the efficiency of structural modeling. In this model, the bridge structural components are expressed with component description, parametric description and geometric description in a software system. This model provides both convenience and flexibility for users in structural modeling process. The object-oriented method is applied in the model implementation. A bridge analysis preprocessor is developed on the basis of this model. It provides an effective way for bridge modeling.

  2. Dynamics and Statics of Nonaxisymmetric Liquid Bridges

    Science.gov (United States)

    Alexander, J. Iwan D.; Resnick, Andrew H.; Slobozhanin, L. A.

    1996-01-01

    Theoretical and experimental investigation of the stability of nonaxisymmetric and nonaxisymmetric bridges contained between equal and unequal radii disks as a function of Bond and Weber number with emphasis on the transition from unstable axisymmetric to stable nonaxisymmetric shapes, are conducted. Numerical analysis of the stability of nonaxisymmetric bridges between unequal disks for various orientations of the gravity vector is performed. Experimental and theoretical investigation of large (nonaxisymmetric) oscillations and breaking of liquid bridges are also conducted.

  3. Maximal liquid bridges between horizontal cylinders

    OpenAIRE

    Cooray, Himantha; Huppert, Herbert E.; Neufeld, Jerome A

    2016-01-01

    We investigate two-dimensional liquid bridges trapped between pairs of identical horizontal cylinders. The cylinders support forces due to surface tension and hydrostatic pressure which balance the weight of the liquid. The shape of the liquid bridge is determined by analytically solving the nonlinear Laplace-Young equation. Parameters that maximize the trapping capacity (defined as the cross-sectional area of the liquid bridge) are then determined. The results show that these parameters can ...

  4. Axisymmetric long liquid bridges stability and resonances

    OpenAIRE

    Meseguer Ruiz, José; Sanz Andres, Angel Pedro; Perales Perales, José Manuel

    1990-01-01

    In this paper mathematical expressions for minimum-volume stability limits and resonance frequencies of axisymmetric long liquid bridges are presented. These expressions are valid for a wide range of liquid bridge configurations, accounting for ef-fects like unequal disks and axial microgravity in the case of minimum-volume stability limits,and unequal disks, axial microgravity,non-zero viscosity and liquid bridge volume different from the cylindrical one in the case of resonance frequenc...

  5. Crystal growth under bridge foundation

    OpenAIRE

    Ramon Tarragona, Anna; Alonso Pérez de Agreda, Eduardo

    2012-01-01

    W(H)YDOC PhD Prize 2012, durant el 4th International Workshop of Young Doctors in Geomechanics W(H)YDOC 2012. A high-speed railway viaduct experienced a sustained heave at high rates after its construction. The pillars of the bridge are founded on an Eocene hard anhydritic-gypsiferous claystone by means of massive foundations. Field investigations identified an active layer below the piles’ tips where expansions occur as a result of gypsum crystal growth in discontinuities from supersatura...

  6. Nanoclusters a bridge across disciplines

    CERN Document Server

    Jena, Purusottam

    2010-01-01

    This comprehensive book on Nanoclusters comprises sixteen authoritative chapters written by leading researchers in the field. It provides insight into topics that are currently at the cutting edge of cluster science, with the main focus on metal and metal compound systems that are of particular interest in materials science, and also on aspects related to biology and medicine. While there are numerous books on clusters, the focus on clusters as a bridge across disciplines sets this book apart from others. Delivers cutting edge coverage of cluster science Covers a broad range of topics in

  7. Family Medicine: Bridge to Life.

    Science.gov (United States)

    Luz, Clare

    2016-01-01

    Reflecting on the suicide of a close friend, this essay explores what comprises, and inspires a will to live, and how those in Family Medicine can address suicide risk even in the face of debilitating or terminal illness. Research indicates that the will to live is a measurable indicator of general well-being, distinct from depression, and an important predictor of a person's motivation to "hold on to life". As such, understanding what is at the heart of a desire to live should alter clinical practice. This essay offers ideas for ways in which to create bridges for patients that could help sustain life.

  8. A bridge to advanced mathematics

    CERN Document Server

    Sentilles, Dennis

    2011-01-01

    This helpful workbook-style ""bridge"" book introduces students to the foundations of advanced mathematics, spanning the gap between a practically oriented calculus sequence and subsequent courses in algebra and analysis with a more theoretical slant. Part 1 focuses on logic and number systems, providing the most basic tools, examples, and motivation for the manner, method, and concerns of higher mathematics. Part 2 covers sets, relations, functions, infinite sets, and mathematical proofs and reasoning. Author Dennis Sentilles also discusses the history and development of mathematics as well a

  9. Myocardial bridges: morphological and functional aspects.

    OpenAIRE

    A.G. Ferreira; Trotter, S E; König, B; Décourt, L V; Fox, K; Olsen, E G

    1991-01-01

    OBJECTIVE--To assess the arrangement of myocardial bridges. DESIGN--A necropsy study of 90 consecutive hearts (56 male, 34 female). RESULTS--Myocardial bridges, either single or multiple, were seen in 50 (55.6%) of the 90 hearts. The left anterior descending artery was the most commonly affected artery. Thirty five of the 50 hearts which contained in total 41 muscle bridges were dissected further with a magnifying glass. Two different types of muscle bridges could be identified. Thirty one of...

  10. A data management infrastructure for bridge monitoring

    Science.gov (United States)

    Jeong, Seongwoon; Byun, Jaewook; Kim, Daeyoung; Sohn, Hoon; Bae, In Hwan; Law, Kincho H.

    2015-04-01

    This paper discusses a data management infrastructure framework for bridge monitoring applications. As sensor technologies mature and become economically affordable, their deployment for bridge monitoring will continue to grow. Data management becomes a critical issue not only for storing the sensor data but also for integrating with the bridge model to support other functions, such as management, maintenance and inspection. The focus of this study is on the effective data management of bridge information and sensor data, which is crucial to structural health monitoring and life cycle management of bridge structures. We review the state-of-the-art of bridge information modeling and sensor data management, and propose a data management framework for bridge monitoring based on NoSQL database technologies that have been shown useful in handling high volume, time-series data and to flexibly deal with unstructured data schema. Specifically, Apache Cassandra and Mongo DB are deployed for the prototype implementation of the framework. This paper describes the database design for an XML-based Bridge Information Modeling (BrIM) schema, and the representation of sensor data using Sensor Model Language (SensorML). The proposed prototype data management framework is validated using data collected from the Yeongjong Bridge in Incheon, Korea.

  11. Review of Energy Harvesters Utilizing Bridge Vibrations

    Directory of Open Access Journals (Sweden)

    Farid Ullah Khan

    2016-01-01

    Full Text Available For health monitoring of bridges, wireless acceleration sensor nodes (WASNs are normally used. In bridge environment, several forms of energy are available for operating WASNs that include wind, solar, acoustic, and vibration energy. However, only bridge vibration has the tendency to be utilized for embedded WASNs application in bridge structures. This paper reports on the recent advancements in the area of vibration energy harvesters (VEHs utilizing bridge oscillations. The bridge vibration is narrowband (1 to 40 Hz with low acceleration levels (0.01 to 3.8 g. For utilization of bridge vibration, electromagnetic based vibration energy harvesters (EM-VEHs and piezoelectric based vibration energy harvesters (PE-VEHs have been developed. The power generation of the reported EM-VEHs is in the range from 0.7 to 1450000 μW. However, the power production by the developed PE-VEHs ranges from 0.6 to 7700 μW. The overall size of most of the bridge VEHs is quite comparable and is in mesoscale. The resonant frequencies of EM-VEHs are on the lower side (0.13 to 27 Hz in comparison to PE-VEHs (1 to 120 Hz. The power densities reported for these bridge VEHs range from 0.01 to 9539.5 μW/cm3 and are quite enough to operate most of the commercial WASNs.

  12. Gust loading on streamlined bridge decks

    DEFF Research Database (Denmark)

    Larose, Guy; Mann, Jakob

    1998-01-01

    The current analytical description of the buffeting action of wind on long-span bridges is based on the strip assumption. However, recent experiments on closed-box girder bridge decks have shown that this assumption is not valid and is the source of an important part of the error margin of the an......The current analytical description of the buffeting action of wind on long-span bridges is based on the strip assumption. However, recent experiments on closed-box girder bridge decks have shown that this assumption is not valid and is the source of an important part of the error margin...

  13. 49 CFR 237.101 - Scheduling of bridge inspections.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Scheduling of bridge inspections. 237.101 Section... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Bridge Inspection § 237.101 Scheduling of bridge inspections. (a) Each bridge management program shall include a provision for scheduling...

  14. Finite element of multilayer surfacing systems on orthotropic steel bridges

    NARCIS (Netherlands)

    Li, J.; Liu, X.; Scarpas, A.; Tzimiris, G.

    2013-01-01

    Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations h

  15. The Bridge of Mandolin County

    Science.gov (United States)

    Lantz, Juliette M.; Feindt, Jenny E.; Lewellyn, Eric P. B.; Walczak, Mary M.

    1999-12-01

    The Bridge of Mandolin County is a case designed to teach the general chemistry principles of molar mass, ions and aqueous reactions, solubility rules, and inorganic nomenclature. Through the instructor-facilitated class discussion, students consider the options before the Mandolin Town Council regarding deicing the newly constructed bridge connecting Mandolin with a large nearby city. The students must decipher contradictory claims made on behalf of sodium chloride, the traditional deicer, and calcium magnesium acetate, a new environmentally friendly deicer, to arrive at the most cost-effective and environmentally appropriate deicing product. As they work through the analysis they raise questions that can be addressed in a laboratory setting. Four optional role-playing experiments are included, which can be used by the students to gather information helpful to resolution of the case. The case is intended to be used over two class periods, with a laboratory period in between, though suggestions for other models are provided. Laboratory procedures include an EDTA titration for Ca2+ and Mg2+, a gravimetric analysis, a qualitative examination of ions and solubility, an introduction to freezing point depression and measurement, and an experimental design activity. This case can also successfully be used without alteration in non-majors chemistry or environmental chemistry courses, or upper-level analytical or environmental chemistry courses.

  16. Bridge Lock-up Device System

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    The Colebrand Lock-up Device (LUD) provides additional substructure strength to resist seismic forces as a structural shock transmission unit for highway bridges. This system can provide a temporary rigid link between bridge structural members under seismic, braking, or other fast-acting type loads, while permitting slow thermal movements.

  17. Paul Dirac:. Building Bridges of the Mind

    Science.gov (United States)

    Brown, Laurie M.

    2003-12-01

    Paul Dirac was a brilliant and original thinker. He used his physical intuition and his ideal of mathematical beauty to construct bridges between major areas of physics. This article discusses several such important works, including the bridge between quantum mechanics and relativity that led to his prediction of the existence of antimatter.

  18. History of cable-stayed bridges

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1999-01-01

    The principle of supporting a bridge deck by inclined tension members leading to towers on either side of the span has been known for centuries. However, the real development of cable-stayed bridges did not begin before the 1950s. Since then the free span has been increased from 183 m in the Strö...

  19. COUPLING VIBRATION OF VEHICLE-BRIDGE SYSTEM

    Institute of Scientific and Technical Information of China (English)

    陈炎; 黄小清; 马友发

    2004-01-01

    By applying the sinusoidal wave mode to simulate the rugged surface of bridge deck,accounting for vehicle-bridge interaction and using Euler-Bernoulli beam theory, a coupling vibration model of vehicle-bridge system was developed. The model was solved by mode analyzing method and Runge-Kutta method, and the dynamic response and the resonance curve of the bridge were obtained. It is found that there are two resonance regions, one represents the main resonance while the other the minor resonance, in the resonance curve. The influence due to the rugged surface, the vibration mode of bridge, and the interaction between vehicle and bridge on vibration of the system were discussed. Numerical results show that the influence due to these parameters is so significant that the effect of roughness of the bridge deck and the mode shape of the bridge can't be ignored and the vehicle velocity should be kept away from the critical speed of the vehicle.

  20. A STUDY OF BARRIERS IN BRIDGING COMMUNICATION

    OpenAIRE

    Niteen V. Dandekar

    2014-01-01

    The main objective of this paper is to make a thought provoking discussion on the role barriers in bridging communication. It focuses on the concept of communication, process and the role of language related barriers in bridging communication. It studies the significance of communication in modern human life.

  1. General framework for bridge life cycle design

    Institute of Scientific and Technical Information of China (English)

    Junhai MA; Airong CHEN; Jun HE

    2009-01-01

    Based on a detailed illustration for bridge life cycle design which comprises the processes of service life design, aesthetics design, performance design, environ-mental and ecological design, inspection, maintenance and repair design as well as cost analysis, this paper presented a general framework for bridge life cycle design comprising three design phases and six design processes.

  2. Active aerodynamic stabilisation of long suspension bridges

    DEFF Research Database (Denmark)

    Nissen, Henrik Ditlev; Sørensen, Paul Haase; Jannerup, Ole Erik

    2004-01-01

    The paper describes the addition of actively controlled appendages (flaps) attached along the length of the bridge deck to dampen wind-induced oscillations in long suppension bridges. A novel approach using control systems methods for the analysis of dynamic stability is presented. In order to ma...

  3. Lifetime Reliability Assessment of Concrete Slab Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    A procedure for lifetime assesment of the reliability of short concrete slab bridges is presented in the paper. Corrosion of the reinforcement is the deterioration mechanism used for estimating the reliability profiles for such bridges. The importance of using sensitivity measures is stressed...

  4. Re-Assessment of Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper two aspects of re-assessment of the reliability of concrete bridges are discussed namely modelling of the corrosion of reinforcement and updating of uncertain variables. The main reason for deterioration of concrete bridges is corrosion of the reinforcement. Therefore, modelling...

  5. Optimum Maintenance Strategies for Highway Bridges

    DEFF Research Database (Denmark)

    Frangopol, Dan M.; Thoft-Christensen, Palle; Das, Parag C.;

    As bridges become older and maintenance costs become higher, transportation agencies are facing challenges related to implementation of optimal bridge management programs based on life cycle cost considerations. A reliability-based approach is necessary to find optimal solutions based on minimum ...... is described. The end result of this investigation will be a general reliability-based framework to be used by the UK Highways Agency in order to plan optimal strategies for the maintenance of its bridge network so as to optimize whole-life costs....... expected life-cycle costs or maximum life-cycle benefits. This is because many maintenance activities can be associated with significant costs, but their effects on bridge safety can be minor. In this paper, the program of an investigation on optimum maintenance strategies for different bridge types...

  6. The I-35W bridge Project Website

    DEFF Research Database (Denmark)

    Kampf, Constance

    How can websites be used to rebuild trust?  In August 2007, the Interstate Highway 35-W bridge in Minneapolis, MN collapsed during rush hour.  Although many people were rescued and casualties were as limited as could be expected due to quick and effective intervention, the image of a major bridge...... collapsing during rush hour damaged the Minnesota Department of Transportation's reputation and resulted in the loss of public trust for the organization.  The ensuing bridge reconstruction project included a project website intended to rebuild this trust through transparency, community involvement......, and the use of multimodal features.  This paper looks at the I35-W bridge reconstruction project in Minneapolis through web-based communication by the Minnesota Department of Transportation (MnDOT) about the project. The MnDOT bridge reconstruction website will be examined using a combination of 1). Weick...

  7. Modified Geometry of Transition Slabs for Integral Bridges

    OpenAIRE

    Dreier, Damien

    2010-01-01

    Over the past decades, an increasing number of integral bridges have been built. This type of bridge offers various advantages in comparison with standard bridges equipped with expansion joints and bearings. In particular, integral bridges require less maintenance since they require less mechanical elements. Transition slabs, which are used in integral bridges, are directly connected to the bridge deck and therefore they are subjected to large displacements caused by creep, shrinkage and temp...

  8. Building bridges … and accelerators

    CERN Multimedia

    2009-01-01

    Lyn Evans, the LHC project leader, was awarded an honorary doctorate from the University of Geneva (UNIGE) to celebrate his role not just in building accelerators, but also in building bridges between nations. He was one of four notables honoured at the event on Friday 5 June, coinciding with the University’s 450th Anniversary. Lyn Evans arriving at the ceremony with Archbishop Desmond Tutu. "It was a big surprise when I found out I’d been nominated," recounts Evans, "but it was an even bigger surprise to find out with whom I’d been nominated". At the ceremony Evans was awarded the honorary doctorate along with three others: Archbishop Desmond Tutu, who was acclaimed for his fight against apartheid in South Africa, Mary Robinson, first woman president of Ireland and former United Nations’ high commissioner of human rights, and Pascal Lamy, Director-General of the World Trade Organization. The award ceremony, known as the �...

  9. Root coverage with bridge flap

    Directory of Open Access Journals (Sweden)

    Pushpendra Kumar Verma

    2013-01-01

    Full Text Available Gingival recession in anterior teeth is a common concern due to esthetic reasons or root sensitivity. Gingival recession, especially in multiple anterior teeth, is of huge concern due to esthetic reasons. Various mucogingival surgeries are available for root coverage. This case report presents a new bridge flap technique, which allows the dentist not only to cover the previously denuded root surfaces but also to increase the zone of attached gingiva at a single step. In this case, a coronally advanced flap along with vestibular deepening technique was used as root coverage procedure for the treatment of multiple recession-type defect. Here, vestibular deepening technique is used to increase the width of the attached gingiva. The predictability of this procedure results in an esthetically healthy periodontium, along with gain in keratinized tissue and good patient′s acceptance.

  10. Oscillations in a sunspot with light bridges

    CERN Document Server

    Yuan, Ding; Huang, Zhenghua; Li, Bo; Su, Jiangtao; Yan, Yihua; Tan, Baolin

    2014-01-01

    Solar Optical Telescope onboard Hinode observed a sunspot (AR 11836) with two light bridges (LBs) on 31 Aug 2013. We analysed a 2-hour \\ion{Ca}{2} H emission intensity data set and detected strong 5-min oscillation power on both LBs and in the inner penumbra. The time-distance plot reveals that 5-min oscillation phase does not vary significantly along the thin bridge, indicating that the oscillations are likely to originate from the underneath. The slit taken along the central axis of the wide light bridge exhibits a standing wave feature. However, at the centre of the wide bridge, the 5-min oscillation power is found to be stronger than at its sides. Moreover, the time-distance plot across the wide bridge exhibits a herringbone pattern that indicates a counter-stream of two running waves originated at the bridge sides. Thus, the 5-min oscillations on the wide bridge also resemble the properties of running penumbral waves. The 5-min oscillations are suppressed in the umbra, while the 3-min oscillations occupy...

  11. Track-Bridge Longitudinal Interaction of Continuous Welded Rails on Arch Bridge

    Directory of Open Access Journals (Sweden)

    Rong Chen

    2013-01-01

    Full Text Available Taking arch bridges, including deck, half-through, and through arch bridges (short for DAB, HTAB, and TAB as examples, mechanics analysis models of longitudinal interaction between continuously welded rails (short for CWRs and arch bridges are established. Based on the finite element method (FEM, the longitudinal interaction calculation software of CWR on arch bridges has been developed. Focusing on an HTAB, the tension, compression, and deflection conditions are calculated and analyzed. The results show that the mechanics analysis models of three types of arch bridges can truly reflect the real state of the structure; the calculation software can be used for systematic research of the CWR on arch bridge; as for HTAB, temperature difference of arch rib has a small effect on rail tension/compression, and arch bridge can be simplified as a continuous beam for rail tension/compression additional force calculation; in calculation of deflection conditions of HTAB, it is suggested that train loads are arranged on half span and full span and take the direction of load entering bridge into account. Additionally, the deflection additional force variation of CFST basket handle arch bridge is different from that of ordinary bridge.

  12. Signal and noise in bridging PCR

    Directory of Open Access Journals (Sweden)

    Thaler David S

    2002-07-01

    Full Text Available Abstract Background In a variant of the standard PCR reaction termed bridging, or jumping, PCR the primer-bound sequences are originally on separate template molecules. Bridging can occur if, and only if, the templates contain a region of sequence similarity. A 3' end of synthesis in one round of synthesis that terminates in this region of similarity can prime on the other. In principle, Bridging PCR (BPCR can detect a subpopulation of one template that terminates synthesis in the region of sequence shared by the other template. This study considers the sensitivity and noise of BPCR as a quantitative assay for backbone interruptions. Bridging synthesis is also important to some methods for computing with DNA. Results In this study, BPCR was tested over a 328 base pair segment of the E. coli lac operon and a signal to noise ratio (S/N of approximately 10 was obtained under normal PCR conditions with Taq polymerase. With special precautions in the case of Taq or by using the Stoffel fragment the S/N was improved to 100, i.e. 1 part of cut input DNA yielded the same output as 100 parts of intact input DNA. Conclusions In the E. coli lac operator region studied here, depending on details of protocol, between 3 and 30% per kilobase of final PCR product resulted from bridging. Other systems are expected to differ in the proportion of product that is bridged consequent to PCR protocol and the sequence analyzed. In many cases physical bridging during PCR will have no informational consequence because the bridged templates are of identical sequence, but in a number of special cases bridging creates, or, destroys, information.

  13. Human Errors and Bridge Management Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, A. S.

    Human errors are divided in two groups. The first group contains human errors, which effect the reliability directly. The second group contains human errors, which will not directly effect the reliability of the structure. The methodology used to estimate so-called reliability distributions...... on basis of reliability profiles for bridges without human errors are extended to include bridges with human errors. The first rehabilitation distributions for bridges without and with human errors are combined into a joint first rehabilitation distribution. The methodology presented is illustrated...

  14. Building the Clinical Bridge: An Australian Success

    Directory of Open Access Journals (Sweden)

    Marianne Wallis

    2012-01-01

    Full Text Available Nursing effectiveness science includes primary, secondary, and translational, clinically focused research activities which aim to improve patient or client outcomes. It is imperative, for the successful conduct of a program of nursing effectiveness science, that a clinical bridge is established between academic and healthcare service facilities. An Australian example of the development of a robust clinical bridge through the use of jointly funded positions at the professorial level is outlined. In addition, an analysis of the practical application of Lewin’s model of change management and the contribution of both servant and transformational leadership styles to the bridge building process is provided.

  15. Building the clinical bridge: an Australian success.

    Science.gov (United States)

    Wallis, Marianne; Chaboyer, Wendy

    2012-01-01

    Nursing effectiveness science includes primary, secondary, and translational, clinically focused research activities which aim to improve patient or client outcomes. It is imperative, for the successful conduct of a program of nursing effectiveness science, that a clinical bridge is established between academic and healthcare service facilities. An Australian example of the development of a robust clinical bridge through the use of jointly funded positions at the professorial level is outlined. In addition, an analysis of the practical application of Lewin's model of change management and the contribution of both servant and transformational leadership styles to the bridge building process is provided.

  16. Maxwell Tension Supports the Water Bridge

    OpenAIRE

    Widom, A.; Srivastava, Y. N.; Swain, J.; Sivasubramanian, S.

    2008-01-01

    A cylindrical flexible cable made up of pure fluid water can be experimentally spanned across a spatial gap with cable endpoints fixed to the top edges of two glass beakers. The cable has been called a water bridge in close analogy to iron cables employed to build ordinary span bridges. A necessary condition for the construction of a water bridge is that a large electric field exists parallel to and located within the water cable. Presently, there is no accepted detailed theory which quantita...

  17. Pilot testing of a hydraulic bridge exciter

    OpenAIRE

    Andersson Andreas; Ülker-Kaustell Mahir; Borg Richard; Dymén Olivier; Carolin Anders; Karoumi Raid

    2015-01-01

    This paper describes the development of a hydraulic bridge exciter and its first pilot testing on a full scale railway bridge in service. The exciter is based on a hydraulic load cylinder with a capacity of 50 kN and is intended for controlled dynamic loading up to at least 50 Hz. The load is applied from underneath the bridge, enabling testing while the railway line is in service. The system is shown to produce constant load amplitude even at resonance. The exciter is used to experimentally ...

  18. Allegheny County-Owned Bridges Points

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset shows the location of bridges owned by Allegheny County as centroids. If viewing this description on the Western Pennsylvania Regional Data Center’s...

  19. Allegheny County-Owned Bridges Centerlines

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset shows the bridges owned by Allegheny County. If viewing this description on the Western Pennsylvania Regional Data Center’s open data portal...

  20. Influence of Icing on Bridge Cable Aerodynamics

    DEFF Research Database (Denmark)

    Koss, Holger; Frej Henningsen, Jesper; Olsen, Idar

    2013-01-01

    In recent years the relevance of ice accretion for wind-induced vibration of structural bridge cables has been recognised and became a subject of research in bridge engineering. Full-scale monitoring and observation indicate that light precipitation at moderate low temperatures between zero and -5......°C may lead to large amplitude vibrations of bridge cables under wind action. For the prediction of aerodynamic instability quasi-steady models have been developed estimating the cable response magnitude based on structural properties and aerodynamic force coefficients for drag, lift and torsion...... forces of different bridge cables types. The experiments were conducted in a wind tunnel facility capable amongst others to simulate incloud icing conditions....

  1. Assessment of the Reliability of Concrete Bridges

    DEFF Research Database (Denmark)

    Middleton, C. R.; Thoft-Christensen, Palle

    in the wake of ever increasing traffic loads and volumes, and an ageing population of bridges subject to various mechanisms of deterioration. The goal is to optimise the allocation of limited resources whilst maintaining their bridges in a safe and serviceable condition. Reliability analysis is one tool being......Although there has been a considerable amount of research into different aspects of concrete bridge reliability, it has still not been widely adopted in professional practice other than in the development and calibration of codes. This situation appears to be changing as there has been...... adopted to assist in achieving this goal. Rather than review the specific research on this subject this paper examines a number of key issues related to the practical application of reliability analysis to the assessment of concrete bridges....

  2. Pilot testing of a hydraulic bridge exciter

    Directory of Open Access Journals (Sweden)

    Andersson Andreas

    2015-01-01

    Full Text Available This paper describes the development of a hydraulic bridge exciter and its first pilot testing on a full scale railway bridge in service. The exciter is based on a hydraulic load cylinder with a capacity of 50 kN and is intended for controlled dynamic loading up to at least 50 Hz. The load is applied from underneath the bridge, enabling testing while the railway line is in service. The system is shown to produce constant load amplitude even at resonance. The exciter is used to experimentally determine frequency response functions at all sensor locations, which serve as valuable input for model updating and verification. An FE-model of the case study bridge has been developed that is in good agreement with the experimental results.

  3. Practical Approach to Fragility Analysis of Bridges

    Directory of Open Access Journals (Sweden)

    Yasamin Rafie Nazari

    2012-12-01

    Full Text Available Damages during past earthquakes reveal seismic vulnerability of bridge structures and the necessity of probabilistic approach toward seismic performance evaluation of bridges and its interpretation in terms of decision variables such as repair cost, downtime and life loss. This Procedure involves hazard analysis, structural analysis, damage analysis and loss analysis. The purpose of present study is reviewing different methods developed to derive fragility curves for damage analysis of bridges and demonstrating a simple procedure for fragility analysis using Microsoft Office Excel worksheet to reach probability of occurring predefined level of damage due to different levels of seismic demand parameters. The input of this procedure is the intensity of ground motion and the output is an appropriate estimate of the expected damage. Different observed damages of the bridges are discussed and compared the practical definition of damage states. Different methods of fragility analyses are discussed and a practical step by step example is illustrated.

  4. Identifying hidden sexual bridging communities in Chicago.

    Science.gov (United States)

    Youm, Yoosik; Mackesy-Amiti, Mary Ellen; Williams, Chyvette T; Ouellet, Lawrence J

    2009-07-01

    Bridge populations can play a central role in the spread of human immunodeficiency virus (HIV) by providing transmission links between higher and lower prevalence populations. While social network methods are well suited to the study of bridge populations, analyses tend to focus on dyads (i.e., risk between drug and/or sex partners) and ignore bridges between distinct subpopulations. This study takes initial steps toward moving the analysis of sexual network linkages beyond individual and risk group levels to a community level in which Chicago's 77 community areas are examined as subpopulations for the purpose of identifying potential bridging communities. Of particular interest are "hidden" bridging communities; that is, areas with above-average levels of sexual ties with other areas but whose below-average AIDS prevalence may hide their potential importance for HIV prevention. Data for this analysis came from the first wave of recruiting at the Chicago Sexual Acquisition and Transmission of HIV Cooperative Agreement Program site. Between August 2005 through October 2006, respondent-driven sampling was used to recruit users of heroin, cocaine, or methamphetamine, men who have sex with men regardless of drug use, the sex partners of these two groups, and sex partners of the sex partners. In this cross-sectional study of the sexual transmission of HIV, participants completed a network-focused computer-assisted self-administered interview, which included questions about the geographic locations of sexual contacts with up to six recent partners. Bridging scores for each area were determined using a matrix representing Chicago's 77 community areas and were assessed using two measures: non-redundant ties and flow betweenness. Bridging measures and acquired immunodeficiency syndrome (AIDS) case prevalence rates were plotted for each community area on charts representing four conditions: below-average bridging and AIDS prevalence, below-average bridging and above

  5. Inspection Based Evaluation of a Danish Road Bridge

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper it is shown how an inspection-based evaluation of a Danish road bridge may be performed using the BRIDGE1 and BRIDGE2 bridge management systems produced within the EC-supported research programme "Assessment of Performance and Optimal Strategies for Inspection and Maintenance...

  6. TMACS test procedure TP012: Panalarm software bridge

    International Nuclear Information System (INIS)

    This Test Procedure addresses the testing of the functionality of the Tank Monitor and Control System (TMACS) Panalarm bridge software. The features to be tested are: Bridge Initialization Options; Bridge Communication; Bridge Performance; Testing Checksum Errors; and Testing Command Reject Errors. Only the first three could be tested; the last two have been deferred to a later date

  7. Assessment of a Bridge WIM System on Integral Concrete Bridges and on Steel Orthotropic Decks

    OpenAIRE

    Ieng, Sio Song; SCHMIDT, Franziska; ROMBONI, Frédéric; Jacob, Bernard

    2011-01-01

    Bridge-Weigh-In-Motion uses bridges as a scale to weigh vehicles. Practically, this is done by measuring the strains in that bridge, and relating them to the weight and dimensions of a truck called “calibration trucks” whose shape and axle weights are well known. This article summarizes different B-WIM experiments the institute IFSTTAR (formerly called LCPC) realized and the lessons drawn from this experience. First, the system has been tested on frame-type bridges with integral s...

  8. Experimental study of single span railway bridges

    OpenAIRE

    Rigueiro, Constança; Rebelo, C.; Silva, L. Simões da

    2007-01-01

    The main purpose of this paper is to present some results concerning the investigation that has been done by the authors regarding the dynamic response of small to médium span railway bridges using response acceleration data colleted during the measurements carried out on single span bridges on the railway track Linz-Wels, in Austria. Using output-only methods in this experimental program, it was possible to have an estimation of the igenfrequencies, mode shapes and the corresponding viscous ...

  9. Active control of vibrations in pedestrian bridges

    OpenAIRE

    Álvaro Cunha; Carlos Moutinho

    1999-01-01

    This paper, apart from making a brief general reference to vibration problems in pedestrian bridges, as well as to the form of modelling of dynamic pedestrian loads, presents the use of a predictive control strategy for the numerical simulation of the dynamic response of actively controlled structures of this type. The consideration of this control strategy permitted the development of a computational model, which was applied to the study of a pedestrian cable-stayed bridge, in order to show ...

  10. Building Organic Bridges: Volume 1, Argentina - France

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  11. Building Organic Bridges: Volume 2, Germany - India

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  12. Thermal Bridge Effects in Walls Separating Rowhouses

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures.......In this report the thermal bridge effects at internal wall/roof junctions in rowhouses are evaluated. The analysis is performed using a numerical calculation programme, and different solutions are evaluated with respect to extra heat loss and internal surface temperatures....

  13. External Prestressing Bridge Reinforcement Technology Review

    Directory of Open Access Journals (Sweden)

    Zhu Hanbing

    2015-01-01

    Full Text Available Externally prestressed bridge can not only limit and reduce the cracks and deformation of the structure, improve the rigidity and bearing capacity of structure, improve the stress state of structure, but also have less interference for bridge operation when it is operating and have the good economic efficiency. This paper introduces the advantages and disadvantages of external prestressed strengthening technique, its calculation theory and construction technology described in detail, and finally the paper discusses the deficiency of existing research.

  14. Subscapularis Tendon Repair Using Suture Bridge Technique

    OpenAIRE

    Park, Yong Bok; Park, Young Eun; Koh, Kyoung Hwan; Lim, Tae Kang; Shon, Min Soo; Yoo, Jae Chul

    2015-01-01

    The subscapularis tendon plays an essential role in shoulder function. Although subscapularis tendon tears are less common than other rotator cuff tears, tears of the subscapularis tendon have increasingly been recognized with the advent of magnetic resonance imaging and arthroscopy. A suture bridge technique for the treatment of posterosuperior rotator cuff tears has provided the opportunity to improve the pressurized contact area and mean footprint pressure. However, suture bridge fixation ...

  15. Framework for Bridges Maintenance in Egypt

    Directory of Open Access Journals (Sweden)

    Hesham Abd Elkhalek

    2016-01-01

    Full Text Available The traditional approaches for bridges maintenance is proven to be inefficient as they lead to random way of spending maintenance budget and deteriorating bridge conditions. In many cases, maintenance activities are performed due to user complaints. The objective of this paper is to develop a practical and reliable framework to manage the maintenance and repair activities of Bridges network in Egypt considering performance and budget limits. The model solves an optimization problem that maximizes the average condition of the network given the limited budget using Genetic Algorithm (GA. The main tasks of the system are bridge inventory, condition assessment, deterioration using markov model, and maintenance optimization. The developed model takes into account multiple parameters including serviceability requirements, budget allocation, element importance on structural safety and serviceability, bridge impact on network, and traffic. A questionnaire is conducted to complete the research scope. The proposed model is implemented in software, which provides a friendly user interface. The results of the framework are multi – year maintenance plan for the entire network for up to five years. A case study is presented for validating and testing the model with Data collected from “General Authority for Roads, Bridges and Land Transport” in Egypt.

  16. Precast Pearl-Chain concrete arch bridges

    DEFF Research Database (Denmark)

    Halding, Philip Skov; Hertz, Kristian Dahl; Schmidt, Jacob Wittrup

    2015-01-01

    A Pearl-Chain Bridge is a closed-spandrel arch bridge consisting of a number of straight pre-fabricated so called Super-Light Deck elements put together in an arch shape by post-tensioning cables. Several Pearl-Chain arches can be positioned adjacent to each other by a crane to achieve a bridge...... the technology was used. We also study other important components and details in the Pearl-Chain Bridge concept and review the effects of different types of loads. A theoretical case study of a circular 30 m span Pearl-Chain Bridge is presented showing the influence of a number of parameters: The number of post......-tensioning cables, the rise to span ratio, the height of the filling, and the height of the Super-Light Decks. We find that Pearl-Chain Bridges can be adjusted to resist specific moment loads by changing the normal force in the arch cross section by altering the above parameters. It is also found that the negative...

  17. Response Modification Factors for Concrete Bridges in Europe

    OpenAIRE

    Kappos, A. J.; Paraskeva, T. S.; Moschonas, I. F.

    2013-01-01

    The paper presents a methodology for evaluating the actual response modification factors (q or R) of bridges and applies it to seven concrete bridges typical of the stock found in southern Europe. The usual procedure for analytically estimating the q-factor is through pushover curves derived for the bridge in (at least) its longitudinal and transverse directions. The shape of such curves depends on the seismic energy dissipation mechanism of the bridge; hence, bridges are assigned to two cate...

  18. Role of multiprotein bridging factor 1 in archaea: bridging the domains?

    NARCIS (Netherlands)

    Koning, de B.; Blombach, F.; Wu Hao,; Brouns, S.J.J.; Oost, van der J.

    2009-01-01

    MBF1 (multiprotein bridging factor 1) is a highly conserved protein in archaea and eukaryotes. It was originally identified as a mediator of the eukaryotic transcription regulator BmFTZ-F1 (Bombyx mori regulator of fushi tarazu). MBF1 was demonstrated to enhance transcription by forming a bridge bet

  19. Micromechanical model of cross-over fibre bridging - Prediction of mixed mode bridging laws

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Gamstedt, E.K.; Østergaard, Rasmus Christian;

    2008-01-01

    The fracture resistance of fibre composites can be greatly enhanced by crack bridging. In situ observations of mixed mode crack growth in a unidirectional carbon-fibre/epoxy composite reveal crack bridging by single fibres and by beam-like ligaments consisting of several fibres. Based on the obse...

  20. Comprehensive Real-Time Bridge Health Monitoring System of Tongtai Bridge

    Directory of Open Access Journals (Sweden)

    Lei Su-su

    2015-01-01

    Full Text Available Tongtai Bridge is the world’s largest suspension curve-girder-skew-arch bridge, which is located in Zhangjiakou, China. The understanding of mechanics characteristics is limited to such complex bridges, so it is necessary to establish reliable health monitoring system to investigate the static and dynamic responses and monitor the safety of the bridge. A comprehensive real-time bridge health monitoring system is establish, which includes four aspects: sensor system, data acquisition and transmission system, data processing and control system, structure early warning and security assessment system. The paper systematically describes the system design principles, sensor layout, and monitoring content, then expounds system integration and function of each subsystem.

  1. A probabilistic bridge safety evaluation against floods.

    Science.gov (United States)

    Liao, Kuo-Wei; Muto, Yasunori; Chen, Wei-Lun; Wu, Bang-Ho

    2016-01-01

    To further capture the influences of uncertain factors on river bridge safety evaluation, a probabilistic approach is adopted. Because this is a systematic and nonlinear problem, MPP-based reliability analyses are not suitable. A sampling approach such as a Monte Carlo simulation (MCS) or importance sampling is often adopted. To enhance the efficiency of the sampling approach, this study utilizes Bayesian least squares support vector machines to construct a response surface followed by an MCS, providing a more precise safety index. Although there are several factors impacting the flood-resistant reliability of a bridge, previous experiences and studies show that the reliability of the bridge itself plays a key role. Thus, the goal of this study is to analyze the system reliability of a selected bridge that includes five limit states. The random variables considered here include the water surface elevation, water velocity, local scour depth, soil property and wind load. Because the first three variables are deeply affected by river hydraulics, a probabilistic HEC-RAS-based simulation is performed to capture the uncertainties in those random variables. The accuracy and variation of our solutions are confirmed by a direct MCS to ensure the applicability of the proposed approach. The results of a numerical example indicate that the proposed approach can efficiently provide an accurate bridge safety evaluation and maintain satisfactory variation. PMID:27386269

  2. Natural vibration dynamics of Rainbow Bridge, Utah

    Science.gov (United States)

    Moore, J. R.; Thorne, M. S.; Wood, J. R.; Doyle, S.; Stanfield, E.; White, B.

    2015-12-01

    We measured resonant frequencies of Rainbow Bridge, Utah, one of the world's longest rock spans, during a field experiment recording ambient vibration data. Measurements were generated over 20 hours on March 23-24, 2015 using two broadband three-component seismometers placed on the bridge, and compared to concurrent data from nearby reference stations 20 and 220 m distant. We identified seven distinct modes of vibration for Rainbow Bridge between 1 and 6 Hz. Data for each resonant frequency was then analyzed to determine the frequency-dependent polarization vector in an attempt to clarify mode shapes; e.g. the fundamental mode represents out-of-plane horizontal flexure. We compared experimental data to results of 3D numerical modal analysis, using a new photogrammetric model of Rainbow Bridge generated in this study imported into COMSOL Multiphysics. Results compare well with measured data for seven of the first eight modeled modes, matching vibrational frequencies and polarization orientations generally within 10%. Only predicted mode 6 was not explicitly apparent in our experimental data. Large site-to-reference spectral ratios resolved from experimental data indicate high amplification on the bridge as compared to nearby bedrock.

  3. Bridges in the random-cluster model

    Directory of Open Access Journals (Sweden)

    Eren Metin Elçi

    2016-02-01

    Full Text Available The random-cluster model, a correlated bond percolation model, unifies a range of important models of statistical mechanics in one description, including independent bond percolation, the Potts model and uniform spanning trees. By introducing a classification of edges based on their relevance to the connectivity we study the stability of clusters in this model. We prove several exact relations for general graphs that allow us to derive unambiguously the finite-size scaling behavior of the density of bridges and non-bridges. For percolation, we are also able to characterize the point for which clusters become maximally fragile and show that it is connected to the concept of the bridge load. Combining our exact treatment with further results from conformal field theory, we uncover a surprising behavior of the (normalized variance of the number of (non-bridges, showing that it diverges in two dimensions below the value 4cos2⁡(π/3=0.2315891⋯ of the cluster coupling q. Finally, we show that a partial or complete pruning of bridges from clusters enables estimates of the backbone fractal dimension that are much less encumbered by finite-size corrections than more conventional approaches.

  4. 76 FR 11679 - Drawbridge Operation Regulation; Shark River (South Channel), Belmar, NJ

    Science.gov (United States)

    2011-03-03

    ... SECURITY Coast Guard 33 CFR Part 117 Drawbridge Operation Regulation; Shark River (South Channel), Belmar... operation of the S71 Bridge across Shark River (South Channel), mile 0.8, at Belmar, NJ. The deviation is... INFORMATION: The S71 Bridge, a bascule lift drawbridge, across Shark River (South Channel), at mile 0.8,...

  5. Fast Hough transform for automatic bridge extraction

    Science.gov (United States)

    Hao, Qiwei; Chen, Xiaomei; Ni, Guoqiang; Zhang, Huaili

    2008-03-01

    In this paper, a new method to recognize bridge in the complicated background is presented. The algorithm takes full advantages of the characteristics of the bridge image. Firstly, the image is preprocessed and the object edges are extracted. Then according to the limitations of traditional Hough transform (HT), the extraction method of the image line segment characteristic of HT is improved, which eliminates spurious peaks on the basis of global and local thresholds, discriminates the position relation between two straight line segments, and merges segments with near endpoints, etc. Experiments show that this algorithm is more precise and efficient than traditional HT, moreover it can provide a complete description of the bridge in a complicated background.

  6. MINERAL BRIDGES OF NACRE AND ITS EFFECTS

    Institute of Scientific and Technical Information of China (English)

    宋凡; 白以龙

    2001-01-01

    Nacre, or mother-of-pearl, is a kind of composites of aragonite platelets sandwiched between organic materials. Its excellent mechanical properties are thought to stem from the microarchitecture that is traditionally described as a "brick and mortar" arrangement. In this paper, a new microstructure, referred to as mineral bridge in the biomineralization, is directly observed in the organic matrix layers (mortar) of nacre. This is an indication that the organic matrix layer of nacre should be treated as a three-dimensional interface and the microarchitecture of nacre ought to be considered as a "brick-bridge-mortar" structure rather than the traditional one. Experiments and analyses show that the mineral bridges not only improve the mechanical properties of the organic matrix layers but also play an important role in the pattern of the crack extension in nacre.

  7. MULTIPHASE BLASTING OF THE BRIDGE ACROSS THE DRENICA RIVER

    OpenAIRE

    Branko Božić

    1989-01-01

    The construction of new bridges on the sites of the existing ones require demolition of the old bridge. Due to closeness of newly erected bridge elements the fundations of old bridges are demolished by multiphase blasting process. The blasting of the piers and anchorages of the bridge across 'the Drenica river carrying the Balačevac—Goleš industrial railway was done in four phases. The piers and anchorages of a new bridge and its construction elements have been erected before (the paper is pu...

  8. Bridging radiation policy and science

    International Nuclear Information System (INIS)

    Scientists, regulators, and policy makers from five continents and 20 countries reached consensus on a number of conclusions and recommendations regarding low-level ionizing radiation exposures at an international conference, 'Bridging Radiation Policy and Science,' at the Airlie Center in Warrenton, Virginia, 1-5 December 1999. The goal of the conference was to develop strategies for formulating national and international policy based on current scientific information in the context of economic, political, and social concerns. Specifically, attendees explored how to establish public policies with respect to radiation protection in view of the scientific uncertainties of the effects of low-level radiation [<100 millisievert (mSv)]. Conference participants agreed that science will not likely answer in the near future fundamental questions about the shape of the dose-response curve and mechanisms of effects of radiation at low doses. The conference endorsed the quest for a prudent and coherent radiation policy based on the International Atomic Energy Agency's (IAEA) 'evolving global framework'. The Conference participants agreed upon the following recommendations: Policy discussions on the regulation of radiation sources delivering low-level radiation should include references to natural background radiation. The conference supports the evolving global framework of the International Atomic Energy Agency (IAEA) for the safe use of radiation. The conference supports further development and evaluation of the ideas associated with the proposal on controllable dose. No radiation dose is below regulatory concern but certain levels should be below regulatory action, and appropriate dose levels should be established. Fundamental questions about the shape of the dose-response curve and mechanisms of effects of radiation at low doses are unlikely to be answered in the near future. Scientific research, including molecular and cellular radiobiology studies are critical in order

  9. Extracorporeal Life Support Bridge to Ventricular Assist Device: The Double Bridge Strategy.

    Science.gov (United States)

    Marasco, Silvana F; Lo, Casey; Murphy, Deirdre; Summerhayes, Robyn; Quayle, Margaret; Zimmet, Adam; Bailey, Michael

    2016-01-01

    In patients requiring left ventricular assist device (LVAD) support, it can be difficult to ascertain suitability for long-term mechanical support with LVAD and eventual transplantation. LVAD implantation in a shocked patient is associated with increased morbidity and mortality. Interest is growing in the utilization of extracorporeal life support (ECLS) as a bridge-to-bridge support for these critically unwell patients. Here, we reviewed our experience with ECLS double bridging. We hypothesized that ECLS double bridging would stabilize end-organ dysfunction and reduce ventricular assist device (VAD) implant perioperative mortality. We conducted a retrospective review of prospectively collected data for 58 consecutive patients implanted with a continuous-flow LVAD between January 2010 and December 2013 at The Alfred Hospital, Melbourne, Victoria, Australia. Twenty-three patients required ECLS support pre-LVAD while 35 patients underwent LVAD implantation without an ECLS bridge. Preoperative morbidity in the ECLS bridge group was reflected by increased postoperative intensive care duration, blood loss, blood product use, and postoperative renal failure, but without negative impact upon survival when compared with the no ECLS group. ECLS stabilization improved end-organ function pre-VAD implant with significant improvements in hepatic and renal dysfunction. This series demonstrates that the use of ECLS bridge to VAD stabilizes end-organ dysfunction and reduces VAD implant perioperative mortality from that traditionally reported in these "crash and burn" patients.

  10. The seismic response of concrete arch bridges (with focus on the Bixby Creek bridge Carmel, California)

    Energy Technology Data Exchange (ETDEWEB)

    Hoehler, M; McCallen, D; Noble, C

    1999-06-01

    The analysis, and subsequent retrofit, of concrete arch bridges during recent years has relied heavily on the use of computational simulation. For seismic analysis in particular, computer simulation, typically utilizing linear approximations of structural behavior, has become standard practice. This report presents the results of a comprehensive study of the significance of model sophistication (i.e. linear vs. nonlinear) and pertinent modeling assumptions on the dynamic response of concrete arch bridges. The study uses the Bixby Creek Bridge, located in California, as a case study. In addition to presenting general recommendations for analysis of this class of structures, this report provides an independent evaluation of the proposed seismic retrofit for the Bixby Creek Bridge. Results from the study clearly illustrate a reduction of displacement drifts and redistribution of member forces brought on by the inclusion of material nonlinearity. The analyses demonstrate that accurate modeling of expansion joints, for the Bixby Creek Bridge in particular, is critical to achieve representative modal and transient behavior. The inclusion of near-field displacement pulses in ground motion records was shown to significantly increase demand on the relatively softer, longer period Bixby Creek Bridge arch. Stiffer, shorter period arches, however, are more likely susceptible to variable support motions arising from the canyon topography typical for this class of bridges.

  11. V. Tormis: "Bridge of Song / Brian Hunt

    Index Scriptorium Estoniae

    Hunt, Brian

    1997-01-01

    Uuest heliplaadist "V. Tormis: "Bridge of Song" - Bridge of Song; Singing aboard ship; Brides Farewell; Kihnu Island Wedding Songs; 17 Estonian Wedding Songs; Three Estonian Game Songs; Four Estonian Lullabies. Estonian Radio Choir / Toomas Kapten. Finlandia 4509 96937-2; 56:52 DDD; "People of Kalevala" - God protect us from war; Vespian Winter; Eagle Flew From the North East; Plague Memory; Vainamoinen's Words of Wisdom; The Seventeenth Rune of Kalevala. National Male Choir of Estonia. Finlandia 0630 12245-2; 56:52 DDD

  12. Stability of a liquid bridge under vibration

    Science.gov (United States)

    Benilov, E. S.

    2016-06-01

    We examine the stability of a vertical liquid bridge between two vertically vibrating, coaxial disks. Assuming that the vibration amplitude and period are much smaller than the mean distance between the disks and the global timescale, respectively, we employ the method of multiple scales to derive a set of asymptotic equations. The set is then used to examine the stability of a bridge of an almost cylindrical shape. It is shown that, if acting alone, gravity is a destabilizing influence, whereas vibration can weaken it or even eliminate altogether. Thus, counter-intuitively, vibration can stabilize an otherwise unstable capillary structure.

  13. ParB spreading requires DNA bridging

    OpenAIRE

    Graham, Thomas G. W.; Wang, Xindan; Song, Dan; Etson, Candice M.; van Oijen, Antoine M.; Rudner, David Z.; Loparo, Joseph J.

    2014-01-01

    The bacterial parABS system is employed for plasmid partitioning and chromosome segregation. ParB binds to parS sites and associates with broad regions of adjacent DNA, a phenomenon known as spreading. However, the molecular basis for spreading is unknown. Using single-molecule approaches, Graham et al. demonstrate DNA bridging by B. subtilis ParB (Spo0J). Spo0J mutations that disrupt DNA bridging lead to defective spreading and SMC condensin complex recruitment. This study suggests a novel, ...

  14. Germanium-overcoated niobium Dayem bridges

    Science.gov (United States)

    Holdeman, L. B.; Peters, P. N.

    1976-01-01

    Overcoating constriction microbridges with semiconducting germanium provides additional thermal conductivity at liquid-helium temperatures to reduce the effects of self-heating in these Josephson junctions. Microwave-induced steps were observed in the I-V characteristics of an overcoated Dayem bridge fabricated in a 15-nm-thick niobium film; at least 20 steps could be counted at 4.2 K. No steps were observed in the I-V characteristics of the bridge prior to overcoating. In addition, the germanium overcoat can protect against electrical disturbances at room temperature.

  15. Ambient Vibration Test on Reinforced Concrete Bridges

    Directory of Open Access Journals (Sweden)

    Idris Nurul Shazwin

    2016-01-01

    Full Text Available An investigation was carried out to determine dynamic characteristic of reinforced concrete (RC bridges by using ambient vibration test (AVT. The ambient vibration sources on bridges may come from traffic, wind, wave motion and seismic events. AVT describes the dynamic characteristics of the bridge and ground by measuring the natural frequencies using highly sensitive seismometer sensor. This test is beneficial due to light weight equipment and smaller number of operator required, cheap and easy to be handled. It is able to give a true picture of the bridge dynamic behavior without any artificial force excitation when vibration data is recorded. A three-span reinforced concrete bridge located in Sri Medan, Batu Pahat, Johor was measured by using microtremor equipment consist of three units of 1 Hz eigenfrequency passive sensors used in this test was performed in normal operating condition without excitation required from any active sources or short period noise perturbations. Ten measurements were conducted on the bridge deck and ten measurements on the ground surface in order to identify the natural frequencies of the bridge. Several peak frequencies were identified from three components of Fourier Amplitude Spectra (FAS in transverse (North-South, longitudinal (East-West and vertical (Up-Down direction as well as squared average Horizontal to Vertical Spectral Ratio (HVSR of ground response, computed by using Geopsy software. From the result, it was expected the bridge have five vibration modes frequencies in the range of 1.0 Hz and 7.0 Hz with the first two modes in the transverse and longitudinal direction having a frequency 1.0 Hz, the third mode is 2.2 Hz in transverse direction, fourth and fifth mode is 5.8 Hz and 7.0 Hz. For ground natural frequencies are in range 1.0 Hz to 1.3 Hz for North-South direction and 1.0 Hz to 1.6 Hz for East-West direction. Finally the results are compared with several empirical formulas for simple

  16. A Bridge Deflection Monitoring with GPS

    Science.gov (United States)

    Figurski, M.; Gałuszkiewicz, M.; Wrona, M.

    2007-01-01

    This paper introduces results of investigation carried on by The Applied Geomatics Section in Military University of Technology. Research includes possibilities of monitoring dynamic behavior of a bridge using high rate GPS data. Whole event was executed with collaboration of The Road and Bridge Management and The Warsaw Geodesy Company. Interdisciplinary approach with this project allows authors to get reliable information about investigating constructions and their respond for true traffic loading detected by GPS receivers. Way of compute data and used software (TRACK) are also shown in this paper.

  17. Planar Hall effect bridge magnetic field sensors

    DEFF Research Database (Denmark)

    Henriksen, A.D.; Dalslet, Bjarke Thomas; Skieller, D.H.;

    2010-01-01

    Until now, the planar Hall effect has been studied in samples with cross-shaped Hall geometry. We demonstrate theoretically and experimentally that the planar Hall effect can be observed for an exchange-biased ferromagnetic material in a Wheatstone bridge topology and that the sensor signal can...... be significantly enhanced by a geometric factor. For the samples in the present study, we demonstrate an enhancement of the sensor output by a factor of about 100 compared to cross-shaped sensors. The presented construction opens a new design and application area of the planar Hall effect, which we term planar...... Hall effect bridge sensors....

  18. Planar Hall effect bridge magnetic field sensors

    Science.gov (United States)

    Henriksen, A. D.; Dalslet, B. T.; Skieller, D. H.; Lee, K. H.; Okkels, F.; Hansen, M. F.

    2010-07-01

    Until now, the planar Hall effect has been studied in samples with cross-shaped Hall geometry. We demonstrate theoretically and experimentally that the planar Hall effect can be observed for an exchange-biased ferromagnetic material in a Wheatstone bridge topology and that the sensor signal can be significantly enhanced by a geometric factor. For the samples in the present study, we demonstrate an enhancement of the sensor output by a factor of about 100 compared to cross-shaped sensors. The presented construction opens a new design and application area of the planar Hall effect, which we term planar Hall effect bridge sensors.

  19. “On a bridge in Berlin”

    DEFF Research Database (Denmark)

    Pihl, Ole Verner

    2013-01-01

    that jumps in time and place: it begins with Martin Heidegger´s quotation “The Bridge gathers to itself in its own way earth and sky, divinities and mortals”, and the bridge is a state of mind, a chronotope, a portal in time between past, present, and future. The methodological approach is based...... on Bachelard and Heidegger. This GN investigates how architecture changes our cities and cultural identity. It merges different narrative time layers as: childhood memories, dreams, hallucinations, fiction, past, present, and future. The findings of this paper explains why a cross disciplinary approach...

  20. Composite timber-concrete road bridge structure

    Directory of Open Access Journals (Sweden)

    Stojić Dragoslav

    2007-01-01

    Full Text Available This work presents preliminary design of the road bridge made of laminated timber. The supporting system of the main bearing elements is made of the laminated timber in the system of arch with three joints; the bridge slab is designed as continuous slab, made of nine equal fields; each pair is made as composite timber-concrete beam, where the road slab is made of concrete and the needle pieces are made of timber. Fundament is based on HW piles. All the elements are designed to Eurocode.

  1. Diode-quad bridge for reactive transducers and FM discriminators

    Science.gov (United States)

    Harrison, D. R.; Dimeff, J.

    1972-01-01

    Diode-quad bridge circuit was developed for use with pressure-sensitive capacitive transducers, liquid-level measuring devices, proximity deflection sensors, and inductive displacement sensors. It may also be used as FM discriminator and as universal impedance bridge.

  2. Foot force models of crowd dynamics on a wobbly bridge

    CERN Document Server

    Belykh, Igor; Belykh, Vladamir

    2016-01-01

    Modern pedestrian and suspension bridges are designed using industry-standard packages, yet disastrous resonant vibrations are observed, necessitating multi-million dollar repairs. Recent examples include pedestrian induced vibrations during the openings of the Solf\\'erino Bridge in Paris in 1999 and the increased bouncing of the Squibb Park Bridge in Brooklyn in 2014. The most prominent example of an unstable lively bridge is the London Millennium Bridge which started wobbling as a result of pedestrian-bridge interactions. Pedestrian phase-locking due to footstep phase adjustment, is suspected to be the main cause of its large lateral vibrations; however, its role in the initiation of wobbling was debated. In this paper, we develop foot force models of pedestrians' response to bridge motion and detailed, yet analytically tractable models of crowd phase-locking. We use bio-mechanically inspired models of crowd lateral movement to investigate to what degree pedestrian synchrony must be present for a bridge to ...

  3. Violin bridge mobility analysis under in-plane excitation.

    Science.gov (United States)

    Zhang, Cheng-Zhong; Zhang, Guang-Ming; Ye, Bang-Yan; Liang, Li-Dong

    2013-11-08

    The vibration of a violin bridge is a dynamic contact vibration with two interfaces: strings-bridge, and bridge feet-top plate. In this paper, the mobility of an isolated bridge under in-plane excitation is explored using finite element modeling based on the contact vibration model. Numerical results show that the dynamic contact stiffness in the two contact interfaces has a great impact on the bridge mobility. A main resonance peak is observed in the frequency range of 2-3 kHz in the frequency response of the isolated bridge when the contact stiffness is smaller than a critical threshold. The main resonance peak frequency is affected by the contact stiffness as well. In order to verify the numerical findings, a novel experimental system is then designed on the basis of a piezoelectric dynamometer for bridge mobility analysis. Experimental results confirm the impact of the dynamic contact stiffness on the bridge mobility.

  4. CDC WONDER: Population - Bridged-Race July 1st Estimates

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Population - Bridged-Race July 1st Estimates online databases report bridged-race population estimates of the July 1st resident population of the United States,...

  5. Violin Bridge Mobility Analysis under In-Plane Excitation

    Directory of Open Access Journals (Sweden)

    Cheng-Zhong Zhang

    2013-11-01

    Full Text Available The vibration of a violin bridge is a dynamic contact vibration with two interfaces: strings-bridge, and bridge feet-top plate. In this paper, the mobility of an isolated bridge under in-plane excitation is explored using finite element modeling based on the contact vibration model. Numerical results show that the dynamic contact stiffness in the two contact interfaces has a great impact on the bridge mobility. A main resonance peak is observed in the frequency range of 2–3 kHz in the frequency response of the isolated bridge when the contact stiffness is smaller than a critical threshold. The main resonance peak frequency is affected by the contact stiffness as well. In order to verify the numerical findings, a novel experimental system is then designed on the basis of a piezoelectric dynamometer for bridge mobility analysis. Experimental results confirm the impact of the dynamic contact stiffness on the bridge mobility.

  6. Hydraulic bridges in unsaturated coarse granular media: Influence of bridge size and conductivity on flow through clasts

    Science.gov (United States)

    Jayakody, Jeevan A.; Nicholl, Michael J.

    2016-10-01

    Unsaturated flow in coarse granular media must pass through hydraulic bridges (e.g., pendular water, porous connections) that form a physical connection between adjoining clasts. Previous studies suggest that volumetric flow through a porous clast (Q) will be linearly dependent on the cross-sectional area of the hydraulic bridges, and understate the importance of bridge conductivity. Numerical simulations were performed to explore steady-state flow through a spherical clast with identical bridges located at the top and bottom. The cross-sectional area of the bridges relative to that of the clast (Ar) was varied across six orders of magnitude. The ratio of hydraulic conductivity between bridges and clasts (Kb/Kc) was varied across 12 orders of magnitude to consider resistive, neutral, and conductive bridges. Results show that hydraulic bridges place a primary control on both Q and flux distribution within the clast. For neutral and conductive bridges (Kb/Kc ≥1), Ar is the dominant factor in determining Q, while Kb/Kc is the primary control for resistive bridges (Kb/Kc < 1). For all bridges, Q shows a non-linear dependency on both Ar and Kb/Kc. The intra-clast flow distribution shifts outwards as Ar increases. Conductive bridges promote this process and resistive bridges impede it.

  7. Bridging the digital divide with mobile services

    CERN Document Server

    Yelton, Andromeda

    2013-01-01

    In this issue of Library Technology Reports, Andromeda Yelton shows how libraries can build on the breadth of this population to help bridge the digital divide and provide even greater access to information. Yelton breaks down the demographics of mobile internet users, provides examples of how different libraries are reaching out to these populations, and suggests what the future may hold for this trend.

  8. Circuit bridging of components by smoke

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, T.J.; Nowlen, S.P.; Anderson, D.J. [Sandia National Labs., Albuquerque, NM (United States)

    1996-10-01

    Smoke can adversely affect digital electronics; in the short term, it can lead to circuit bridging and in the long term to corrosion of metal parts. This report is a summary of the work to date and component-level tests by Sandia National Laboratories for the Nuclear Regulatory Commission to determine the impact of smoke on digital instrumentation and control equipment. The component tests focused on short-term effects such as circuit bridging in typical components and the factors that can influence how much the smoke will affect them. These factors include the component technology and packaging, physical board protection, and environmental conditions such as the amount of smoke, temperature of burn, and humidity level. The likelihood of circuit bridging was tested by measuring leakage currents and converting those currents to resistance in ohms. Hermetically sealed ceramic packages were more resistant to smoke than plastic packages. Coating the boards with an acrylic spray provided some protection against circuit bridging. The smoke generation factors that affect the resistance the most are humidity, fuel level, and burn temperature. The use of CO{sub 2} as a fire suppressant, the presence of galvanic metal, and the presence of PVC did not significantly affect the outcome of these results.

  9. Bridges in Mathematics. WWC Intervention Report

    Science.gov (United States)

    What Works Clearinghouse, 2009

    2009-01-01

    "Bridges in Mathematics," published by the Math Learning Center (MLC), is an elementary school math curriculum covering kindergarten through fifth grade that focuses on problem solving and skill building, and applies a combination of whole-group, small-group, and independent activities. Lessons incorporate visual models, including manipulatives,…

  10. The Memory Bridge Initiative on Service Learners

    Science.gov (United States)

    Wescott, Amy; Healy, Tara C.

    2011-01-01

    This study evaluated the Memory Bridge Initiative (MBI), an educational, experiential program pairing high school students with older adults who have dementia. A qualitative, single group design with baseline and follow-up measures examined whether or not students would have a positive learning experience while gaining newfound appreciation and…

  11. Bridging the Gap: Pracademics in Foreign Policy

    Science.gov (United States)

    Murphy, Ann Marie; Fulda, Andreas

    2011-01-01

    In his seminal work "Bridging the Gap: Theory and Practice in Foreign Policy", Alexander George (1993) lamented the great divide between academia and the foreign policymaking community, arguing that greater interaction between scholars and policymakers would produce better policy. We share George's belief that scholars and practitioners each have…

  12. Ergonomic aspects of automation in navigation bridges

    NARCIS (Netherlands)

    Lazet, A.; Walraven, P.L.

    1971-01-01

    New ergonomic questions arise from the tendency toward increasing automation in maritime operations. Direct control of engines and rudder from the bridge promises improved ship control, provided that the operator can really exploit the technical improvements. To make such direct control most efficie

  13. LPN/ADN Bridge Course. Instructor's Guide.

    Science.gov (United States)

    Barrett, Jan; And Others

    This curriculum guide has been constructed in order to bridge the skills gap between licensed practical nursing (LPN) programs and associate degree nursing (ADN) programs in Missouri. The curriculum was developed through a cooperative effort by persons from both sectors. The curriculum contains four major units, each consisting of several lessons,…

  14. Journaling: A Bridge between School and Home

    Science.gov (United States)

    McGough, Julie

    2013-01-01

    This article describes how first-grade students create meaningful communication with families and help build the student-teacher-parent relationship through journaling. Journals are a useful tool to bridge school and home. A journal can communicate learning goals, develop scientific vocabulary, and create dialogue through oral and written…

  15. 75 FR 41281 - Bridge Safety Standards

    Science.gov (United States)

    2010-07-15

    ... Federal Register at 60 FR 20654, the interim statement included a request for comments to be submitted to... of Agency Policy on the Safety of Railroad Bridges (``policy statement''). See 65 FR 52667. With the... amendment. See 74 FR 157. All aspects of the policy statement that are not incorporated into the...

  16. Heavy Vehicles on Minor Highway Bridges

    DEFF Research Database (Denmark)

    Nielsen, Søren R. K.; Kirkegaard, Poul Henning; Enevoldsen, I.

    The present paper worked out as a part of a research project on "Dynamic amplification factor of vehicle loadings on smaller bridges" establishes a two-dimensional spectral description of the road roughness surface based on measurements from a Danish road using so-called Profilograph used by Dani...

  17. Bridging gaps : ten crosscurrents in media studies

    OpenAIRE

    Fornäs, Johan

    2008-01-01

    The final, definitive version of this paper has been published in: Media, Culture and Society, (30), 6, 895-905, 2008.Johan Fornäs, Bridging Gaps: Ten Crosscurrents in Media Studies.http://dx.doi.org/10.1177/0163443708096811. by SAGE Publications Ltd, All rights reserved. http://www.sagepub.com/

  18. Steel plate reinforcement of orthotropic bridge decks

    NARCIS (Netherlands)

    Teixeira de Freitas, S.

    2012-01-01

    The PhD research is focused on the reinforcement of fatigue cracked orthotropic steel bridge decks (OBD) by adding a second steel plate to the existing deck. The main idea is to stiffen the existing deck plate, which will reduce the stresses at the fatigue sensitive details and extend the fatigue li

  19. Aeroelastic Stability of Suspension Bridges using CFD

    DEFF Research Database (Denmark)

    Stærdahl, Jesper Winther; Sørensen, Niels; Nielsen, Søren R.K.

    2007-01-01

    In recent years large span suspension bridges with very thin and slender profiles have been built without proportional increasing torsional and bending stiffness. As a consequence large deformations at the mid-span can occur with risk of aeroelastic instability and structural failure. Analysis...

  20. The mechanics of ship impacts against bridges

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Zhang, Shengming

    1998-01-01

    a glancing blow between the ship and the bridge structure. This model is based on rigid body mechanics and well suited for inclusion in a probabilistic analysis procedure. Finally, some empirical expressions are presented which relate the energy absorbed by crushing of ship structures to the maximum impact...

  1. Fiber reinforced polymer composites for bridge structures

    Directory of Open Access Journals (Sweden)

    Alexandra CANTORIU

    2013-12-01

    Full Text Available Rapid advances in construction materials technology have led to the emergence of new materials with special properties, aiming at safety, economy and functionality of bridges structures. A class of structural materials which was originally developed many years ago, but recently caught the attention of engineers involved in the construction of bridges is fiber reinforced polymer composites. This paper provides an overview of fiber reinforced polymer composites used in bridge structures including types, properties, applications and future trends. The results of this study have revealed that this class of materials presents outstanding properties such as high specific strength, high fatigue and environmental resistance, lightweight, stiffness, magnetic transparency, highly cost-effective, and quick assembly, but in the same time high initial costs, lack of data on long-term field performance, low fire resistance. Fiber reinforced polymer composites were widely used in construction of different bridge structures such as: deck and tower, I-beams, tendons, cable stands and proved to be materials for future in this field.

  2. Bridging the Gap Between Theory and Practice

    Directory of Open Access Journals (Sweden)

    Roy H.M. Sembel

    2015-05-01

    Full Text Available Some concerns in the field of Business Management regarding the gap between theory and practice have been raised by practitioners and academicians. This keynote speech describes some lessons learned from the academic literature regarding this gap (whether the gap really exists, and if it exists, whether it needs to be bridged or closed, and how to bridge or close this gap, and shares the author's personal and professional experiences of living as both an academician and a practitioner. The main findings of this article are: (1 Yes the gap exists, however, it has to be viewed in a wider perspective to really understand the situation; (2 The gap in a specific area is bad and should become our concern, but in other areas it should not; (3 There are some ways to bridge or close the negative gap; (4 There exists hybrid career opportunities to become professionals that work both as an academician and a practitioner; (5 This new breed of hybrid professionals has a huge potential to bridge the bad theory-practice gap.

  3. Thermal Bridge Effects in Window Grooves

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    In this report thermal bridge effects in window grooves are analyzed. The analysis is performed using different thicknesses of the window groove insulation, to evaluate what the optimal solution is.All analysis in the report is performed using both 2- and 3-dimensional numerical analysis....

  4. Noise Reduction of Fractional Source in Cryogenic Current Comparator Bridge

    OpenAIRE

    C. Jassadajin; Kurupakorn, C.; N. Khumthukthit; A. Pruksanubal

    2013-01-01

    In this work, a resistance measurement is done at both high accuracy and precision using Cryogenic Current Comparator (CCC) bridge system [1]. A CCC bridge circuit consists of three parts: coil, current source and detector parts. There are electronic components in the current source of the system. They generate thermal noise in the measurement system. This paper shows the noise reduction in a fractional source of CCC Bridge which is a ramp generator. The bridge receives the voltage signal, wh...

  5. Performance of damage detection methods in bridges through vibration monitoring

    OpenAIRE

    Cruz, Paulo J. S.; Salgado, R.

    2009-01-01

    The important advances achieved in the modal identification, sensors and structural monitoring of bridges have motivated the bridge engineering community to develop damage detection methods based on vibration monitoring. Some of these methods have already been demonstrated under certain conditions in bridges with deliberate damage (Farrar et al., 1998). However, the performance of these methods for damage detection in bridges has not been fully proven so far and more research n...

  6. RISK LEVEL ANALYSIS ON THE PREVENTIVE EROSION CAPACITY OF BRIDGES

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Deficiency of the Preventive Erosion Capacity (PEC) of a bridge pier is the main factor leading to bridge failures. In this paper, the PEC of bridge piers was analyzed using the stochastic analysis method. The definitions of the reliability and risk level of a bridge pier subjected to water erosion were proposed and a computational model for erosion depth and risk level in was suggested.

  7. The detection of an older population in the Magellanic Bridge

    OpenAIRE

    Bagheri, Gemma; Cioni, Maria-Rosa; Napiwotzki, Ralf

    2012-01-01

    The Magellanic system comprises the Large Magellanic Cloud (LMC), the Small Magellanic Cloud (SMC), and the less frequently observed Magellanic Bridge and Magellanic Stream. The Bridge is traced by neutral gas and has an observed stellar component, while the Stream consists of gas only, with no observed stellar counterpart to date. This study uses catalogues created in the direction of the Bridge from 2MASS and WISE to investigate the stellar content of the Magellanic Bridge. Catalogues were ...

  8. Rupture of an Evaporating Liquid Bridge between Two Grains

    OpenAIRE

    Mielniczuk, Boleslaw; El Youssoufi, Moulay Saïd; Sabatier, Laurent; Hueckel, Tomasz

    2014-01-01

    The study examines rupture of evaporating liquid bridges between two glass spheres. Evolution of the bridge profile has been recorded with the use of high-speed camera. Geometrical characteristics of the bridge were then used to calculate evolution of the variables during the process: Laplace pressure, capillary force, and surface tension force. For the purpose of reference, the bridge evolution is followed also during kinematic extension. During both processes the diameter of the neck decrea...

  9. TorBricks: Blocking-Resistant Tor Bridge Distribution

    OpenAIRE

    Zamani, Mahdi; Saia, Jared; Crandall, Jedidiah

    2016-01-01

    Tor is currently the most popular network for anonymous Internet access. It critically relies on volunteer nodes called bridges for relaying Internet traffic when a user's ISP blocks connections to Tor. Unfortunately, current methods for distributing bridges are vulnerable to malicious users who obtain and block bridge addresses. In this paper, we propose TorBricks, a protocol for distributing Tor bridges to n users, even when an unknown number t < n of these users are controlled by a malicio...

  10. Railroad Bridges in Louisiana, Geographic NAD83, FEMA (1997) [railroad_bridges_FEMA_1997

    Data.gov (United States)

    Louisiana Geographic Information Center — This is is a point dataset for the locations and attributes of 32 Louisiana railroad bridges. The attributes include city (nearest?), county (sic), routefrom...

  11. Nondestructive evaluation inspection of the Arlington Memorial Bridge using a robotic assisted bridge inspection tool (RABIT)

    Science.gov (United States)

    Gucunski, Nenad; Boone, Shane D.; Zobel, Rob; Ghasemi, Hamid; Parvardeh, Hooman; Kee, Seong-Hoon

    2014-04-01

    The information presented in this report provides a detailed assessment of the condition of the Arlington Memorial Bridge (AMB) deck. The field-data collection was obtained by both the RABIT™ Bridge Inspection Tool and a number of semi-automated non-destructive evaluation (NDE) tools. The deployment of the semi-automated NDE tools was performed to inspect the AMB deck condition and also to validate data obtained by the RABIT™ Bridge Inspection Tool. Data mining and analysis were accomplished through enhanced data interpretation and visualization capabilities using advanced data integration, fusion, and 2D rendering. One of the major challenges that the research team had to overcome in assessing the condition of the AMB deck was the presence of an asphalt overlay on the entire bridge deck.

  12. Performance Assessment of Bridges Using GPS: The Juarez Bridge in Culiacan, Mexico

    Science.gov (United States)

    Vazquez, G. E.; Gaxiola-Camacho, J. R.; Trejo, M.; Echagaray, J.; Guzman, G. M.

    2015-12-01

    Performance assessment of bridges has become very important during recent years. Bridges around the world are aging, leading to the incorporation of efficient, reliable, and economic evaluation procedures. These techniques must assess properly the performance of bridges under several loading conditions in a real manner, representing the physics of the problem. Among several approaches, Global Positioning System (GPS) can be intelligently used for the performance evaluation of bridges. We focused on GPS, since it naturally produces position estimates as compared to seismic instruments that record either velocity or acceleration, and thus require an integration. There are several reasons that make the Juarez Bridge a case of study for evaluation: it is approximately 45 years old, it is a reinforced concrete structure, it connects two significant zones of the city, and its spans is closely to 200 meters long. In addition, thousands of vehicles and pedestrians use the Juarez Bridge every day, which make feasible the GPS performance assessment. Hence, in order to produce optimal position estimates, GPS data were collected during two consecutive hours at three different periods of the day for a whole week (Monday through Sunday), to represent three critical limit states of the bridge (mid-span and end-spans). GPS data were processed using the GAMIT/GLOBK software, considering 1-second sampling rate, 15-degree cutoff angle, ionosphere-free double-differenced (DD) carrier phase method, and precise final orbits disseminated by IGS (International GNSS Service). The displacements obtained from the above discussed procedure are compared with allowable values documented in bridge construction manuals. Reliability theory was used to evaluate the probability of failure of the bridge for the three periods of the day. In addition, a conclusion was made about the most risky day of the week for the use of the Juarez Bridge. It is expected that the results from the proposed research

  13. Building water bridges in air: Electrohydrodynamics of the Floating Water Bridge

    OpenAIRE

    Marin, Alvaro G.; Lohse, Detlef

    2010-01-01

    The interaction of electrical fields and liquids can lead to a phenomenon that defies intuition. Some famous examples can be found in electrohydrodynamics as Taylor cones, whipping jets, or noncoalescing drops. A less famous example is the floating water bridge: a slender thread of water held between two glass beakers in which a high voltage difference is applied. Surprisingly, the water bridge defies gravity even when the beakers are separated at distances up to 2 cm. In this paper, experime...

  14. Spectroscopic Studies of Bridge Contributions to Electronic Coupling in a Donor-Bridge-Acceptor Biradical System

    OpenAIRE

    Kirk, Martin L.; Shultz, David A.; Depperman, Ezra C.; Habel-Rodriguez, Diana; Schmidt, Robert D.

    2012-01-01

    Variable temperature electronic absorption and resonance Raman spectroscopies are used to probe the excited state electronic structure of TpCum,MeZn(SQ-Ph-NN) (1) – a donor-bridge-acceptor (D-B-A) biradical complex and a ground state analog of the charge-separated excited state formed in photoinduced electron transfer reactions. Strong ferromagnetic exchange coupling that is mediated by the para-phenylene bridge stabilizes the triplet ground state of this molecule. Detailed spectroscopic and ...

  15. 49 CFR 237.31 - Adoption of bridge management programs.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Adoption of bridge management programs. 237.31 Section 237.31 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Adoption of bridge management programs. Each track owner shall adopt a bridge safety management program...

  16. Ambient Response Analysis of the Great Belt Bridge

    DEFF Research Database (Denmark)

    Brincker, Rune; Frandsen, J. B.; Andersen, P.

    2000-01-01

    In this paper an ambient response analysis of the Great Belt Bridge is presented. The Great Belt Bridge is one of the largest suspension bridges in the world, and the analysis was carried out in order to investigate the possibilities of estimating reliable damping values from the ambient response...

  17. 23 CFR 650.409 - Evaluation of bridge inventory.

    Science.gov (United States)

    2010-04-01

    ... BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.409... establishing eligibility and priority for replacement or rehabilitation of bridges; in general the lower the... State program. After evaluation of the inventory and assignment of sufficiency ratings, the...

  18. 21 CFR 872.3770 - Temporary crown and bridge resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Temporary crown and bridge resin. 872.3770 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3770 Temporary crown and bridge resin. (a) Identification. A temporary crown and bridge resin is a device composed of a material, such...

  19. Resin-Bonded Bridges in vitro and in vivo

    NARCIS (Netherlands)

    Veen, Johannes Hilbrandt van der

    1988-01-01

    In this thesis in vitro and in vivo studies on the clinical application of resin-bonded bridges are described and discussed. The development of different types of resin-bonded bridges is described in chapter 1. The bridges are often made by boding a cast metal retainer fitted with and artificial too

  20. Bridged Quaterphenyls as Flashlamp-Pumpable Laser Dyes

    OpenAIRE

    Kauffman, Joel M; Kelley, Charles J.; Ghiorghis, Alem; Neister, Edward; Armstrong, Lorne; Prause, Paul R.

    1987-01-01

    Partial bridging of the o,o′ positions of the aromatic rings in quaterphenyl gave superior flashlamp-pumpable laser dyes. Alkyl-substituted carbon bridges gave superior dyes to those containing oxygen or alkyl-substituted nitrogen or silicon bridges. Dyes lasing in the 365–390 nm region with improved energy output, lifetime and solubility were discovered.

  1. Improving the Dynamics of Suspension Bridges using Active Control Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Improving the dynamics of suspension bridge using active control is discussed in this paper. The main dynamic problem with long suspension bridges is the aeroelastic phenomenon called flutter. Flutter oscillations of a bridge girder is a stability problem and the oscillations are perpendicular...

  2. Renovation techniques for fatigue cracked orthotropic steel bridge decks

    NARCIS (Netherlands)

    de Jong, F.B.P.

    2007-01-01

    This dissertation presents the research into renovation techniques for orthotropic steel bridge decks. These techniques are needed to solve fatigue problems in the decks of these bridges, as several fatigue cracks have been detected in the deck structure of these bridges the last decade. A well-know

  3. Road Bridges and Culverts, Bridges layers located in GIS and Transportation database., Published in unknown, City of Roswell, GA.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset as of unknown. It is described as 'Bridges layers located in GIS and Transportation database.'. Data by this publisher are...

  4. PARAMETRIC STUDY OF SKEW ANGLE ON BOX GIRDER BRIDGE DECK

    OpenAIRE

    Shrikant D. Bobade *, Dr. Valsson Varghese

    2016-01-01

    Box girder bridge deck, is the most common type of bridges in world and India, it consists of several Slab or girders. The span in the direction of the roadway and connected across their tops and bottoms by a thin continuous structural stab, the longitudinal box girders can be made of steel or concrete. The Simple supported single span concrete bridge deck is presented in present study. Skewed bridges are suitable in highway design when the geometry of straight bridges is not possible. The sk...

  5. Ambient Modal Testing of the Vestvej Bridge using Random Decrement

    DEFF Research Database (Denmark)

    Asmussen, J. C.; Brincker, Rune; Rytter, A.

    This paper presents an ambient vibration study of the Vestvej Bridge. The bridge is a typically Danish two-span concrete bridge which crosses a highway. The purpose of the study is to perform a pre-investigation of the dynamic behavior to obtain information for the design of a demonstration project...... concerning application of vibration based inspection of bridges. The data analysis process of ambient vribration testing of bridges has traditionally been based on auto and cross spectral densities estimated using an FFT algorithm. In the pre-analysis state the spectral densities are all averaged to obtain...

  6. Ambient Modal Testing of the Vestvej Bridge using Random Decrement

    DEFF Research Database (Denmark)

    Asmussen, J. C.; Brincker, Rune; Rytter, A.

    1998-01-01

    This paper presents an ambient vibration study of the Vestvej Bridge. The bridge is a typically Danish two-span concrete bridge which crosses a highway. The purpose of the study is to perform a pre-investigation of the dynamic behavior to obtain information for the design of a demonstration project...... concerning application of vibration based inspection of bridges. The data analysis process of ambient vribration testing of bridges has traditionally been based on auto and cross spectral densities estimated using an FFT algorithm. In the pre-analysis state the spectral densities are all averaged to obtain...

  7. Seismic Passive Control of Cable-Stayed Bridges

    Directory of Open Access Journals (Sweden)

    Hosam-Eddin M. Ali

    1995-01-01

    Full Text Available A three-dimensional modeling procedure is proposed for cable-stayed bridges with rubber, steel, and lead energy dissipation devices. The passive control technique is investigated by considering the response of bridge models with and without energy dissipation devices. The impact of various design parameters on the seismic response of current and future bridge designs is studied. Appropriate locations and properties of the passive devices can achieve better performance for cable-stayed bridges by balancing the significant reduction in earthquake-induced forces against tolerable displacements. Proper design of passive systems can help provide solutions for retro-fitting some existing bridges.

  8. Dynamic analysis of rail transit elevated bridge with ladder track

    Institute of Scientific and Technical Information of China (English)

    He XIA; Yushu DENG; Yongwei ZOU; Guido DE ROECK; Geert DEGRANDE

    2009-01-01

    In this paper, a dynamic analysis model of an elevated bridge with ladder tracks under moving train load is established. The whole process of a train running through an elevated bridge at different speeds is simulated.The dynamic responses of the elevated bridge with ladder track and the running safety and comfort index of train vehicles are evaluated. Compared with the dynamic responses of an elevated bridge with ordinary non-ballasted slab track, the ladder track's effect on reducing the vibration of an elevated bridge is analyzed. The analysis results show that the ladder track has good vibration reduction characteristics as compared to ordinary non-ballasted track.

  9. Suspension Bridge Flutter for Girder with Separate Control Flaps

    DEFF Research Database (Denmark)

    Huynh, T.; Thoft-Christensen, Palle

    Active vibration control of long span suspension bridge flutter using separated control flaps (SFSC) has shown to increase effectively the critical wind speed of bridges. In this paper, an SFSC calculation based on modal equations of the vertical and torsional motions of the bridge girder including...... the flaps is presented. The length of the flaps attached to the girder, the flap configuration and the flap rotational angles are parameters used to increase the critical wind speed of the bridge. To illustrate the theory a numerical example is shown for a suspension bridge of 1000m+2500m+1000m span based...

  10. Cross-bridge model of muscle contraction. Quantitative analysis.

    OpenAIRE

    Eisenberg, E.; Hill, T L; Chen, Y.

    1980-01-01

    We recently presented, in a qualitative manner, a cross-bridge model of muscle contraction which was based on a biochemical kinetic cycle for the actomyosin ATPase activity. This cross-bridge model consisted of two cross-bridge states detached from actin and two cross-bridge states attached to actin. In the present paper, we attempt to fit this model quantitatively to both biochemical and physiological data. We find that the resulting complete cross-bridge model is able to account reasonably ...

  11. Excitation of Arch and Suspension Bridges by Subwires

    Directory of Open Access Journals (Sweden)

    Noriaki Hiwatashi

    1993-01-01

    Full Text Available A force generation method using a subwire for arch and suspension bridges is proposed. The subwire is connected to the arch or the cable of the bridge through rollers. The uniform force produced by pulling and releasing the pretensioned subwires acts on the bridge as an externalforce. A new device called “the resonance force generator” is also developed to excite the bridges by applying a small force. To verify the proposed concept, a stress ribbon bridge was excited with the resonance force generator.

  12. Excitation of Arch and Suspension Bridges by Subwires

    OpenAIRE

    Noriaki Hiwatashi; Yoji Mizuta; Yutaka Ishihara; Itio Hirai

    1993-01-01

    A force generation method using a subwire for arch and suspension bridges is proposed. The subwire is connected to the arch or the cable of the bridge through rollers. The uniform force produced by pulling and releasing the pretensioned subwires acts on the bridge as an externalforce. A new device called “the resonance force generator” is also developed to excite the bridges by applying a small force. To verify the proposed concept, a stress ribbon bridge was excited with the resonance force ...

  13. Violin Bridge Mobility Analysis under In-Plane Excitation

    OpenAIRE

    Cheng-Zhong Zhang; Guang-Ming Zhang; Bang-Yan Ye; Li-Dong Liang

    2013-01-01

    The vibration of a violin bridge is a dynamic contact vibration with two interfaces: strings-bridge, and bridge feet-top plate. In this paper, the mobility of an isolated bridge under in-plane excitation is explored using finite element modeling based on the contact vibration model. Numerical results show that the dynamic contact stiffness in the two contact interfaces has a great impact on the bridge mobility. A main resonance peak is observed in the frequency range of 2–3 kHz in the frequen...

  14. Translating Climate Projections for Bridge Engineering

    Science.gov (United States)

    Anderson, C.; Takle, E. S.; Krajewski, W.; Mantilla, R.; Quintero, F.

    2015-12-01

    A bridge vulnerability pilot study was conducted by Iowa Department of Transportation (IADOT) as one of nineteen pilots supported by the Federal Highway Administration Climate Change Resilience Pilots. Our pilot study team consisted of the IADOT senior bridge engineer who is the preliminary design section leader as well as climate and hydrological scientists. The pilot project culminated in a visual graphic designed by the bridge engineer (Figure 1), and an evaluation framework for bridge engineering design. The framework has four stages. The first two stages evaluate the spatial and temporal resolution needed in climate projection data in order to be suitable for input to a hydrology model. The framework separates streamflow simulation error into errors from the streamflow model and from the coarseness of input weather data series. In the final two stages, the framework evaluates credibility of climate projection streamflow simulations. Using an empirically downscaled data set, projection streamflow is generated. Error is computed in two time frames: the training period of the empirical downscaling methodology, and an out-of-sample period. If large errors in projection streamflow were observed during the training period, it would indicate low accuracy and, therefore, low credibility. If large errors in streamflow were observed during the out-of-sample period, it would mean the approach may not include some causes of change and, therefore, the climate projections would have limited credibility for setting expectations for changes. We address uncertainty with confidence intervals on quantiles of streamflow discharge. The results show the 95% confidence intervals have significant overlap. Nevertheless, the use of confidence intervals enabled engineering judgement. In our discussions, we noted the consistency in direction of change across basins, though the flood mechanism was different across basins, and the high bound of bridge lifetime period quantiles exceeded

  15. Bridge health assessment system with fatigue analysis algorithm

    Science.gov (United States)

    Wang, Xuan; Wang, M. L.; Zhao, Yang

    2005-05-01

    A modern bridge is such a complicated system that is difficult to analyze by conventional mathematic tools. A rational bridge monitoring requires a good knowledge of the actual condition of various structural components. Fatigue analysis of concrete bridges is one of the most important problems. Concrete bridges are often undergoing a fatigue deterioration, starting with cracking and ending with large holes through the web. There is a need for the development of efficient health assessment system for fatigue evaluation and prediction of the remaining life. This information has clear economical consequences, as deficient bridges must be repaired or closed. The goal of this research is to provide a practical expert system in bridge health evaluation and improve the understanding of bridge behavior during their service. Efforts to develop a functional bridge monitoring system have mainly been concentrated upon successful implementation of experienced-based machine learning. The reliability of the techniques adopted for damage assessment is also important for bridge monitoring systems. By applying the system to an in-service PC bridge, it has been verified that this fuzzy logic expert system is effective and reliable for the bridge health evaluation.

  16. A Review of Indirect Bridge Monitoring Using Passing Vehicles

    Directory of Open Access Journals (Sweden)

    Abdollah Malekjafarian

    2015-01-01

    Full Text Available Indirect bridge monitoring methods, using the responses measured from vehicles passing over bridges, are under development for about a decade. A major advantage of these methods is that they use sensors mounted on the vehicle, no sensors or data acquisition system needs to be installed on the bridge. Most of the proposed methods are based on the identification of dynamic characteristics of the bridge from responses measured on the vehicle, such as natural frequency, mode shapes, and damping. In addition, some of the methods seek to directly detect bridge damage based on the interaction between the vehicle and bridge. This paper presents a critical review of indirect methods for bridge monitoring and provides discussion and recommendations on the challenges to be overcome for successful implementation in practice.

  17. Evaluating the life cycle environmental impact of short span bridges

    DEFF Research Database (Denmark)

    Du, Guangli; Pettersson, Lars; Karoumi, Raid

    2016-01-01

    Bridge infrastructure consumes large amount of energy and raw materials, leading to considerable environmental burdens. The traditional infrastructure construction prioritizes its technical and economic viability. In recent years, the society devotes an ever-increased attention to the environmental...... impact of the construction sector. Life cycle assessment (LCA) is a systematic method for assessing the environmental impact of products and systems, but its application in bridges is scarce. In Swede, most of the bridges are short spans and the type of concrete slab-frame bridge (CFB) accounts...... for a large share. Soil steel composite bridge (SSCB) is a functional equivalent solution for CFB. In order to mitigate the environmental burdens of short span bridges, this paper performed a comparative LCA study between these two types of bridge. The results indicate that the initial material consumption...

  18. Online Bridge Crack Monitoring with Smart Film

    Directory of Open Access Journals (Sweden)

    Benniu Zhang

    2013-01-01

    Full Text Available Smart film crack monitoring method, which can be used for detecting initiation, length, width, shape, location, and propagation of cracks on real bridges, is proposed. Firstly, the fabrication of the smart film is developed. Then the feasibility of the method is analyzed and verified by the mechanical sensing character of the smart film under the two conditions of normal strain and crack initiation. Meanwhile, the coupling interference between parallel enameled wires of the smart film is discussed, and then low-frequency detecting signal and the custom communication protocol are used to decrease interference. On this basis, crack monitoring system with smart film is designed, where the collected crack data is sent to the remote monitoring center and the cracks are simulated and recurred. Finally, the monitoring system is applied to six bridges, and the effects are discussed.

  19. Bridge Condition Assessment Using D Numbers

    Directory of Open Access Journals (Sweden)

    Xinyang Deng

    2014-01-01

    Full Text Available Bridge condition assessment is a complex problem influenced by many factors. The uncertain environment increases more its complexity. Due to the uncertainty in the process of assessment, one of the key problems is the representation of assessment results. Though there exists many methods that can deal with uncertain information, however, they have more or less deficiencies. In this paper, a new representation of uncertain information, called D numbers, is presented. It extends the Dempster-Shafer theory. By using D numbers, a new method is developed for the bridge condition assessment. Compared to these existing methods, the proposed method is simpler and more effective. An illustrative case is given to show the effectiveness of the new method.

  20. Accelerated aging of polymer composite bridge materials

    Science.gov (United States)

    Carlson, Nancy M.; Blackwood, Larry G.; Torres, Lucinda L.; Rodriguez, Julio G.; Yoder, Timothy S.

    1999-05-01

    Accelerated aging research on samples of composite materials and candidate UV protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory. Durability results and sensor data form test with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards and acceptance criteria for PMC bridges for use in the transportation infrastructure.

  1. Tacoma Bridge Failure-- a Physical Model

    CERN Document Server

    Green, D; Green, Daniel; Unruh, William G.

    2004-01-01

    The cause of the collapse of the Tacoma Narrows Bridge has been a topic of much debate and confusion since the day it fell. Many mischaracterizations of the observed phenomena have limited the widespread understanding of the problem. Nevertheless, there has always been an abundance of evidence in favour of a negative damping model. Negative damping, or positive feedback, is responsible for many large amplitude oscillations observed in many applications. In this paper, we will explain some well-known examples of positive feedback. We will then present a feedback model, derived from fundamental physics, capable of explaining a number of features observed in the instabilities of many bridge decks. This model is supported by computational, experimental and historical data.

  2. Fatigue-Prone Details in Steel Bridges

    Directory of Open Access Journals (Sweden)

    Mohsen Heshmati

    2012-11-01

    Full Text Available This paper reviews the results of a comprehensive investigation including more than 100 fatigue damage cases, reported for steel and composite bridges. The damage cases are categorized according to types of detail. The mechanisms behind fatigue damage in each category are identified and studied. It was found that more than 90% of all reported damage cases are of deformation-induced type and generated by some kind of unintentional or otherwise overlooked interaction between different load-carrying members or systems in the bridge. Poor detailing, with unstiffened gaps and abrupt changes in stiffness at the connections between different members were also found to contribute to fatigue cracking in many details.

  3. A liquid bridge connecting moving porous surfaces

    Science.gov (United States)

    Gharib, Morteza; Gat, Amir; Navaz, Homayun

    2011-11-01

    We study the coupled problem of a liquid bridge connecting two porous surfaces where the gap between the surfaces is an externally controlled function of time. The relative motion between the surfaces affects the geometry and the pressure distribution of the liquid bridge, thus influencing the diffusion speed and penetration topology within the porous material. Utilizing the lubrication approximation and Darcy's phenomenological law we obtain a relation between the diffusion into the porous surface and the relative motion between the surfaces. A scheme to control the diffusion topology is presented and illustrated for the case of conical penetration topology with an arbitrary cone opening angle. Analytic expressions describing the penetration topology for the case of constant speed of the surfaces and the relative motion between the surfaces required to create a conical penetration topology are obtained and compared to experimental and numerical data. This project was supported by the Defense Threat Reduction Agency (DTRA), Award Number: 330233-A.

  4. Bridging the Divide between Science and Journalism

    OpenAIRE

    Marincola Francesco M; Van Eperen Laura; Strohm Jennifer

    2010-01-01

    Abstract There are countless reasons nearly every scientist should learn how to communicate effectively with the media, including increased understanding of critical research findings to attract or sustain funding and build new professional partnerships that will further propel forward research. But where do scientists begin? Bridging the Divide between Science and Journalism offers practical tips for any scientist looking to work with the media. Given the traditional and internet-based sourc...

  5. Fatigue-Prone Details in Steel Bridges

    OpenAIRE

    Mohsen Heshmati; Mohammad Al-Emrani; Reza Haghani

    2012-01-01

    This paper reviews the results of a comprehensive investigation including more than 100 fatigue damage cases, reported for steel and composite bridges. The damage cases are categorized according to types of detail. The mechanisms behind fatigue damage in each category are identified and studied. It was found that more than 90% of all reported damage cases are of deformation-induced type and generated by some kind of unintentional or otherwise overlooked interaction between different load-carr...

  6. Design of bridges against large tectonic deformation

    Institute of Scientific and Technical Information of China (English)

    I.Anastasopoulost; G.Gazetas; V.Drosos; T.Georgarakos; R.Kourkoulis

    2008-01-01

    The engineering community has devoted much effort to understanding the response of soil-structure systems to seismic ground motions,but little attention to the effects of an outcropping fault offset.The 1999 earthquakes of Turkey and Taiwan,offering a variety of case histories of structural damage due to faulting,have (re)fueled the interest on the subject.This paper presents a methodology for design of bridges against tectonic deformation.The problem is decoupled in two analysis steps:the first (at the local level) deals with the response of a single pier and its foundation to fault rupture propagating through the soil,and the superstructure is modeled in a simplified manner;and the second (at the global level)investigates detailed models of the superstructure subjected to the support (differential) displacements of Step 1.A parametric study investigates typical models of viaduct and overpass bridges,founded on piles or caissons.Fixed-head piled foundations are shown to be rather vulnerable to faulting-induced deformation.End-bearing piles in particular are unable to survive bedrock offsets exceeding 10 cm.Floating piles perform better,and if combined with hinged pile-to-cap connections,they could survive much larger offsets.Soil resilience is beneficial in reducing pile distress.Caisson foundations are almost invariably successful.Statically-indeterminate superstructures are quite vulnerable,while statically-determinate are insensitive (allowing differential displacements and rotations without suffering any distress).For large-span cantilever construction bridges,where a statically determinate system is hardly an option,inserting resilient seismic isolation bearings is advantageous as long as ample seating can prevent the deck from falling off the supports.An actual application of the developed method is presented for a major bridge,demonstrating the feasibility of design against tectonic deformation.

  7. Bridge Inspections and Being an ERC

    OpenAIRE

    Hoernschemeyer, Keith; Miller, Jessica

    2015-01-01

    This presentation will discuss recent changes to the County Bridge Inspection Program from the perspective of both the FHWA and INDOT. We will also discuss the responsibilities of the local public agency’s (LPA’s) employee in responsible charge (ERC) with respect to managing this program. As this course is a yearly requirement, all county ERCs are encouraged to attend. Pre-registering is strongly encouraged by e-mailing your contact information to .

  8. Liquid bridge simulations with OpenFOAM

    OpenAIRE

    Guirao Aguilar, Guillermo

    2011-01-01

    Any liquid-gas interface being under a temperature gradient is subject to a thermocapillary flow generated by the differences in the surface tension. In the particular case of liquid bridges, this flow can evolve into a oscillatory or travelling flow known as hydrothermal wave. This works aims to achieve a better understanding of the formation of this kind of flow by means of computational fluid dynamics techniques using a specific software package. For that, a simplified model of the liquid ...

  9. Legendrian framings for two-bridge links

    CERN Document Server

    Baader, Sebastian

    2009-01-01

    We define the Thurston-Bennequin polytope of a two-component link as the convex hull of all pairs of integers that arise as framings of a Legendrian representative. The main result of this paper is a description of the Thurston-Bennequin polytope for two-bridge links. As an application, we construct non-quasipositive surfaces in $\\R^3$ all whose sub-annuli are quasipositive.

  10. Ether bridge formation in loline alkaloid biosynthesis

    OpenAIRE

    Pan, Juan; Bhardwaj, Minakshi; Faulkner, Jerome R.; Nagabhyru, Padmaja; Charlton, Nikki D.; Higashi, Richard M.; Miller, Anne-Frances; Young, Carolyn A; Grossman, Robert B.; Schardl, Christopher L

    2013-01-01

    Lolines are potent insecticidal agents produced by endophytic fungi of cool-season grasses. These alkaloids are composed of a pyrrolizidine ring system and an uncommon ether bridge linking carbons 2 and 7. Previous results indicated that 1-aminopyrrolizidine was a pathway intermediate. We used RNA interference to knock down expression of lolO, resulting in the accumulation of a novel alkaloid identified as exo-1-acetamidopyrrolizidine based on high-resolution MS and NMR. Genomes of endophytes...

  11. Bridging the Gap: Linking Simulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Krajewski, Paul E.; Carsley, John; Stoudt, Mark R.; Hovanski, Yuri

    2012-09-01

    The Materials Genome Initiative (MGI) which is a key enabler for the Advanced Manufacturing Partnership, announced in 2011 by U.S. President Barack Obama, was established to accelerate the development and deployment of advanced materials. The MGI is driven by the need to "bridge the gap" between (I) experimental results and computational analysis to enable the rapid development and validation of new mateirals, and (II) the processes required to convert these materials into useable goods.

  12. Bridge concrete deteriorating diagnosis by infrared thermography

    Science.gov (United States)

    Shibata, Hiroki; Fukuyama, Nobuhiro; Sakuma, Joji; Mochizuki, Jun; Kimura, Yukinori

    2006-04-01

    Bridge is indispensable as social overhead capital. In the past, concrete construction was believed to be semi-permanent. Actually, however, concrete is deteriorated by various factors including seawater damage, annual temperature change, etc. Therefore, it is now obvious that maintenance and management are essential to keep performance of the bridge. In Japan, we had many reports of using infrared thermography for diagnosis of building, mainly for delamination of tile and mortar used for surface of the building for more than 10 years. In recent years, infrared thermogrephy is more actively used for delamination of surface of the bridge. Passive method is usually used for open-air concrete structure diagnosis, which utilizes intraday environmental temperature change and/or radiation energy emitted from the sun which create delta-T of delamination portion of the concrete structure. It is very important to take thermal image at right conditions. Otherwise, you may easily fall onto false diagnosis. In our presentation, many case examples and study of thermal data will be shown, which are taken at the right condition.

  13. Building water bridges in air: Electrohydrodynamics of the Floating Water Bridge

    CERN Document Server

    Marin, Alvaro G

    2010-01-01

    The interaction of electrical fields and liquids can lead to phenomena that defies intuition. Some famous examples can be found in Electrohydrodynamics as Taylor cones, whipping jets or non-coalescing drops. A less famous example is the Floating Water Bridge: a slender thread of water held between two glass beakers in which a high voltage difference is applied. Surprisingly, the water bridge defies gravity even when the beakers are separated at distances up to 2 cm. In the presentation, experimental measurements and simple models are proposed and discussed for the stability of the bridge and the source of the flow, revealing an important role of polarization forces on the stability of the water bridge. On the other hand, the observed flow can only be explained due to the non negligible free charge present in the surface. In this sense, the Floating Water Bridge can be considered as an extreme case of a leaky dielectric liquid (J. R. Melcher and G. I. Taylor, Annu. Rev. Fluid Mech., 1:111, 1969).

  14. SMART BRIDGE: A tool for estimating the military load classification of bridges using varying levels of information

    Energy Technology Data Exchange (ETDEWEB)

    Van Groningen, C.N.; Paddock, R.A.

    1997-03-01

    A major consideration in planning and executing military deployments is determining the routes available for moving troops and equipment. Part of this planning ensures that all of the bridges along the routes can support the specialized equipment needed. Because few trained and experienced bridge analysts are available, and automated tool is required to help military engineers and planners quickly and accurately determine the capacity, or the military load classification, of bridges. However, because detailed information about each bridge may not always be available, the tool also needs to include alternative methods for estimating bridge capacities. SMART BRIDGE, developed by Argonne National Laboratory, provides this capacity. The tool consists of a collection of modules that interact with each other to accommodate various bridge types, analytical techniques, and database functions. 5 refs., 6 figs., 2 tabs.

  15. The Internet Inter-Orb Protocol Security Bridge

    Directory of Open Access Journals (Sweden)

    Pawel Slowikowski

    1999-01-01

    Full Text Available In this paper, we present a security bridge for the Internet protocol of interoperability amongst CORBA objects and the Internet inter-ORB Protocol (IIOP. The bridge helps in making accessible objects in the Internet and makes possible the access control to them. The bridge was realized in the popular request broker the Visigenic's VisiBroker under Windows 95/NT and Solaris 2.X operating systems. We describe two ways of locating the bridge in the request broker. The first means uses one name domain of broker and is not transparent for client. The second one uses two name domains and provides objects protection on the level of the Naming Service and is transparent lor the client. We also describe the variant ofthe second means with using GateKeeper server to support IIOP tunneling within HTTP. We emphasize the importance of a firewall, cooperating with a bridge. which is required for the purpose of providing object protection. The paper presents an original conception of security managing, basing on the ideas of users, groups and resources defined using the standard terms of CORBA, IIOP and TCP/IP, that allows to control positively and negatively the access to classes (interfaces, objects and also to their individual methods. This conception was effectively implemented in a functioning bridge. Further chapters describe the foundations and some details of the bridge implementation sueli as the use ofthe Interface Repository, cache memory application, thread synchronization and the way of synchronization of the configuration applet with the bridge's objects. We discuss the influence of these solutions on the efficiency ofthe bridge and its source code portability. We also present the general structure of the component objects ofthe bridge with a scheme. ln the next part we characterize the implementation foundations ofthe bridge manager, realized as an applet in Java, with the stress on the possibility of the bridge configuration through the

  16. Bridges analysis, design, structural health monitoring, and rehabilitation

    CERN Document Server

    Bakht, Baidar

    2015-01-01

    This book offers a valuable guide for practicing bridge engineers and graduate students in structural engineering; its main purpose is to present the latest concepts in bridge engineering in fairly easy-to-follow terms. The book provides details of easy-to-use computer programs for: ·      Analysing slab-on-girder bridges for live load distribution. ·      Analysing slab and other solid bridge components for live load distribution. ·      Analysing and designing concrete deck slab overhangs of girder bridges under vehicular loads. ·      Determining the failure loads of concrete deck slabs of girder bridges under concentrated wheel loads. In addition, the book includes extensive chapters dealing with the design of wood bridges and soil-steel bridges. Further, a unique chapter on structural health monitoring (SHM) will help bridge engineers determine the actual load carrying capacities of bridges, as opposed to their perceived analytical capacities. The chapter addressing structures...

  17. Field Tests and Simulation of Lion-Head River Bridge

    Directory of Open Access Journals (Sweden)

    Yao-Min Fang

    2007-01-01

    Full Text Available Lion-Head River Bridge is a twin bridge in parallel position. The east-bounded was designed and constructed as a traditional prestress concrete box girder bridge with pot bearings; and the west-bounded was installed with seismic isolation devices of lead rubber bearings. The behavior of the isolated bridge is compared with that of the traditional bridge through several field tests including the ambient vibration test, the force vibration test induced by shakers, the free vibration test induced by a push and fast release system, and the truck test. The bridges suffered from various extents of damage due to the Chi-Chi and the Chi-I earthquakes of great strength during the construction and had been retrofitted. The damage was reflected by the change of the bridges' natural frequencies obtained from the ambient vibration tests. The models of the two bridges are simulated by the finite element method based on the original design drawings. Soil-structure interaction was also scrutinized in this study. The simulation was then modified based on the results from the field tests. Dynamic parameters of bridges are identified and compared with those from theoretical simulation. The efficiency is also verified to be better for an isolated bridge.

  18. Aerodynamic stability of cable-supported bridges using CFRP cables

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xin-jun; YING Lei-dong

    2007-01-01

    To gain understanding of the applicability of carbon fiber reinforced polymer (CFRP) cable in cable-supported bridges, based on the Runyang Bridge and Jinsha Bridge, a suspension bridge using CFRP cables and a cable-stayed bridge using CFRP stay cables are designed, in which the cable's cross-sectional area is determined by the principle of equivalent axial stiffness.Numerical investigations on the aerodynamic stability of the two bridges are conducted by 3D nonlinear aerodynamic stability analysis. The results showed that as CFRP cables are used in cable-supported bridges, for suspension bridge, its aerodynamic stability is superior to that of the case using steel cables due to the great increase of the torsional frequency; for cable-stayed bridge,its aerodynamic stability is basically the same as that of the case using steel stay cables. Therefore as far as the wind stability is considered, the use of CFRP cables in cable-supported bridges is feasible, and the cable's cross-sectional area should be determined by the principle of equivalent axial stiffness.

  19. A cloud-based information repository for bridge monitoring applications

    Science.gov (United States)

    Jeong, Seongwoon; Zhang, Yilan; Hou, Rui; Lynch, Jerome P.; Sohn, Hoon; Law, Kincho H.

    2016-04-01

    This paper describes an information repository to support bridge monitoring applications on a cloud computing platform. Bridge monitoring, with instrumentation of sensors in particular, collects significant amount of data. In addition to sensor data, a wide variety of information such as bridge geometry, analysis model and sensor description need to be stored. Data management plays an important role to facilitate data utilization and data sharing. While bridge information modeling (BrIM) technologies and standards have been proposed and they provide a means to enable integration and facilitate interoperability, current BrIM standards support mostly the information about bridge geometry. In this study, we extend the BrIM schema to include analysis models and sensor information. Specifically, using the OpenBrIM standards as the base, we draw on CSI Bridge, a commercial software widely used for bridge analysis and design, and SensorML, a standard schema for sensor definition, to define the data entities necessary for bridge monitoring applications. NoSQL database systems are employed for data repository. Cloud service infrastructure is deployed to enhance scalability, flexibility and accessibility of the data management system. The data model and systems are tested using the bridge model and the sensor data collected at the Telegraph Road Bridge, Monroe, Michigan.

  20. Disulfide Bridges: Bringing Together Frustrated Structure in a Bioactive Peptide.

    Science.gov (United States)

    Zhang, Yi; Schulten, Klaus; Gruebele, Martin; Bansal, Paramjit S; Wilson, David; Daly, Norelle L

    2016-04-26

    Disulfide bridges are commonly found covalent bonds that are usually believed to maintain structural stability of proteins. Here, we investigate the influence of disulfide bridges on protein dynamics through molecular dynamics simulations on the cysteine-rich trypsin inhibitor MCoTI-II with three disulfide bridges. Correlation analysis of the reduced cyclic peptide shows that two of the three disulfide distances (Cys(11)-Cys(23) and Cys(17)-Cys(29)) are anticorrelated within ∼1 μs of bridge formation or dissolution: when the peptide is in nativelike structures and one of the distances shortens to allow bond formation, the other tends to lengthen. Simulations over longer timescales, when the denatured state is less structured, do not show the anticorrelation. We propose that the native state contains structural elements that frustrate one another's folding, and that the two bridges are critical for snapping the frustrated native structure into place. In contrast, the Cys(4)-Cys(21) bridge is predicted to form together with either of the other two bridges. Indeed, experimental chromatography and nuclear magnetic resonance data show that an engineered peptide with the Cys(4)-Cys(21) bridge deleted can still fold into its near-native structure even in its noncyclic form, confirming the lesser role of the Cys(4)-Cys(21) bridge. The results highlight the importance of disulfide bridges in a small bioactive peptide to bring together frustrated structure in addition to maintaining protein structural stability. PMID:27119635

  1. Construction and control technology of the main bridge superstructure of Sutong Bridge

    Institute of Scientific and Technical Information of China (English)

    Zhang Hong; Luo Chenbin; Zhang Yongtao; You Xinpeng

    2009-01-01

    The Sutong Yangtze River Bridge (short as Sutong Bridge) is now the largest span cable-stayed bridge in the world. The construction of the superstructure of the middle bridge covered several stages including erection of the big block girders for the side span, assistant span and tower area, erection of standard girders and closure of the middle span. The big block girders were hoisted by a floating crane, and the standard girders were hoisted by a double crane system on the deck. The pushing assistant method was adopted for the middle span closure construction. Furthermore, key technologies and innovative methods used in the processes of girder erection and cable assemblage in all stages were expatiated systematically. An all-stage self- adaptive geometry control method was used in the construction process. By accurately controlling the unstressed dimensions and shape of all structural components in each step, and realization that the control system and the controlled system adapt to each other, the goal was to make control of the final line shape and inner force of the bridge structure achievable. Two solutions, including GPS based and total station based dynamic geometry monitoring systems, were used to resolve the measure problem under the wide-range of wind-induced vibrations in the long cantilever state. Finally, research on the wind-induced vibration of the superstructure during the construction period was executed. Buffeting response analysis to the longest single and double cantilever states were carried out. The analysis and evaluation of wind resistance safety of the main girders under the longest single cantilever state was made, and corresponding wind resistance measures were suggested. The as-built geometric error and cable force error were controlled in a required design range, and this whole technological achievement can be a benchmark for construction of other large span cable-stayed bridges in the future.

  2. Investigation of Aerodynamic Interference of Double Deck Bridges

    Energy Technology Data Exchange (ETDEWEB)

    Sitek, M. A. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC); Bojanowski, C. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC); Lottes, S. A. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division. Transportation Research and Analysis Computing Center (TRACC)

    2016-05-01

    Construction of a twin bridge can be a cost effective and minimally disruptive way to increase capacity when an existing bridge is not near the end of its service life. With ever growing vehicular traffic, when demand approaches the capacity of many existing roads and bridges. Remodeling a structure with an insufficient number of lanes can be a good solution in case of smaller and less busy bridges. Closing down or reducing traffic on crossings of greater importance for the construction period, however, can result in major delays and revenue loss for commerce and transportation as well as increasing the traffic load on alternate route bridges. Multiple-deck bridges may be the answer to this issue. A parallel deck can be built next to the existing one, without reducing the flow. Additionally, a new bridge can be designed as a twin or multi-deck structure. Several such structures have been built throughout the United States, among them: - The New NY Bridge Project - the Tappan Zee Hudson River Crossing, - SR-182 Columbia River Bridge, - The Thaddeus Kosciusko Bridge (I-87), - The Allegheny River Bridge, Pennsylvania, which carries I76, - Fred Hartman Bridge, TX, see Figure 1.2. With a growing number of double deck bridges, additional, more detailed, studies on the interaction of such bridge pairs in windy conditions appears appropriate. Aerodynamic interference effects should be examined to assure the aerodynamic stability of both bridges. There are many studies on aerodynamic response of single deck bridges, but the literature on double-deck structures is not extensive. The experimental results from wind tunnels are still limited in number, as a parametric study is required, they can be very time consuming. Literature review shows that some investigation of the effects of gap-width and angle of wind incidence has been done. Most of the CFD computational studies that have been done were limited to 2D simulations. Therefore, it is desirable to investigate twin decks

  3. Structural safety monitoring for Nanjing Yangtze River Bridge

    Institute of Scientific and Technical Information of China (English)

    黄方林; 何旭辉; 陈政清; 曾储惠

    2004-01-01

    In order to evaluate objectively and accurately the integrity, safety and operating conditions in real time for the Nanjing Yangtze River Bridge, a large structural safety monitoring system was described. The monitoring system is composed of three parts: sensor system, signal sampling and processing system, and safety monitoring and assessment system. Combining theoretical analysis with measured data analysis, main monitoring contents and layout of measuring points were determined. The vibration response monitoring was significantly investigated. The main contents of safety monitoring on vibration response monitoring are vibration of the main body of the Nanjing Yangtze river bridge, collision avoidance of the bridge piers, vibration of girders on high piers for the bridge approach and earthquake. As a field laboratory, the safety monitorying system also provides information to investigate the unknown and indeterminate problems on bridge structures and specific environment around bridges.

  4. Development of a nondestructive evaluation method for FRP bridge decks

    Science.gov (United States)

    Brown, Jeff; Fox, Terra

    2010-05-01

    Open steel grids are typically used on bridges to minimize the weight of the bridge deck and wearing surface. These grids, however, require frequent maintenance and exhibit other durability concerns related to fatigue cracking and corrosion. Bridge decks constructed from composite materials, such as a Fiber-reinforced Polymer (FRP), are strong and lightweight; they also offer improved rideability, reduced noise levels, less maintenance, and are relatively easy to install compared to steel grids. This research is aimed at developing an inspection protocol for FRP bridge decks using Infrared thermography. The finite element method was used to simulate the heat transfer process and determine optimal heating and data acquisition parameters that will be used to inspect FRP bridge decks in the field. It was demonstrated that thermal imaging could successfully identify features of the FRP bridge deck to depths of 1.7 cm using a phase analysis process.

  5. Detection of Subsurface Defects in Concrete Bridge Deck Joints

    Directory of Open Access Journals (Sweden)

    Wonchang Choi

    2011-01-01

    Full Text Available Problem statement: The integrity of deck joints in highway bridges plays a major role to determine overall performance of bridge system. As the bridge maintenance program, the defects in deck joints have historically been detected by conventional non-destructive testing and evaluation methods such as visual inspection, chain-dragging and by the detecting sounds under the traffic. Future bridge maintenance challenges will demand the development of techniques and procedures to detect and monitor such defects before they become apparent. Approach: Two non-destructive methods; namely Ground Penetration Radar (GPR and Seismic Properties Analyzer (SPA were employed to assess the integrity of deck joins installed in North Carolina bridges. Results: The results obtained with the GPR and SPA allows to quantify the subsurface defects in bridge deck joints. Conclusion: The practical application and limitations of each method are discussed in this study.

  6. Dynamic Vehicle Impact for Safety Assessment of Bridges

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R. K.; Enevoldsen, I.

    In this paper the dynamic amplification of vehicle load at minor highway bridges is considered for safety assessment of the load carrying capacity of bridges. The considered case is the most critical for bridges, i.e. the simultaneous passage of two heavy trucks. A short description...... of the numerical modal parameters of the bridge are known, Only irregularities from imperfect expansion joints have been modelled as bumps at the entrance to the bridge. The results are obtained from a simulation study for different passage situations of the two heavy vehicles. Further, consequences for the safety...... assessment of the bridge are outlined. The results actually obtained show that the dynamic amplification factors used in Danish ans several other national regulations are too conservative....

  7. Wind Tunnel Experiments with Active Control of Bridge Section Model

    DEFF Research Database (Denmark)

    Hansen, Henriette I.; Thoft-Christensen, Palle

    This paper describes results of wind tunnel experiments with a bridge section model where movable flaps are integrated in the bridge girder so each flap is the streamlined part of the edge of the girder. This active control flap system is patented by COWIconsult and may be used to increase the...... flutter wind velocity for future ultra-long span suspension bridges. The purpose of the wind tunnel experiments is to investigate the principle to use this active flap control system. The bridge section model used in the experiments is therefore not a model of a specific bridge but it is realistic...... compared with a real bridge. Five flap configurations are investigated during the wind tunnel experiments and depending on the actual flap configuration it is possible to decrease or increase the flutter wind velocity for the model....

  8. Salt bridge as a gatekeeper against partial unfolding.

    Science.gov (United States)

    Hinzman, Mark W; Essex, Morgan E; Park, Chiwook

    2016-05-01

    Salt bridges are frequently observed in protein structures. Because the energetic contribution of salt bridges is strongly dependent on the environmental context, salt bridges are believed to contribute to the structural specificity rather than the stability. To test the role of salt bridges in enhancing structural specificity, we investigated the contribution of a salt bridge to the energetics of native-state partial unfolding in a cysteine-free version of Escherichia coli ribonuclease H (RNase H*). Thermolysin cleaves a protruding loop of RNase H(*) through transient partial unfolding under native conditions. Lys86 and Asp108 in RNase H(*) form a partially buried salt bridge that tethers the protruding loop. Investigation of the global stability of K86Q/D108N RNase H(*) showed that the salt bridge does not significantly contribute to the global stability. However, K86Q/D108N RNase H(*) is greatly more susceptible to proteolysis by thermolysin than wild-type RNase H(*) is. The free energy for partial unfolding determined by native-state proteolysis indicates that the salt bridge significantly increases the energy for partial unfolding by destabilizing the partially unfolded form. Double mutant cycles with single and double mutations of the salt bridge suggest that the partially unfolded form is destabilized due to a significant decrease in the interaction energy between Lys86 and Asp108 upon partial unfolding. This study demonstrates that, even in the case that a salt bridge does not contribute to the global stability, the salt bridge may function as a gatekeeper against partial unfolding that disturbs the optimal geometry of the salt bridge. PMID:26916981

  9. Abutments influence in the dynamic response of bridges

    OpenAIRE

    Martínez Cutillas, Antonio; Gómez Lera, Sagrario; Alarcón Álvarez, Enrique

    1996-01-01

    A simplified analytical model of a short span bridge is proposed. The inertial interaction effects of pier foundations and abutments has been included in order to evaluate the response sensitivities to different soil-structure interaction variables. The modification of natural frequency and damping properties is shown for typical short span bridges of the integral deck-abutment type for longitudinal vibrations or general bridges for the transverse ones.

  10. Experiences with a two terminal-pair digital impedance bridge

    OpenAIRE

    Callegaro, Luca; D'Elia, Vincenzo; Kampik, Marian; Kim, Dan Bee; Ortolano, Massimo; Pourdanesh, Faranak

    2014-01-01

    This paper describes the realization of a two terminal-pair digital impedance bridge and the test measurements performed with it. The bridge, with a very simple architecture, is based on a commercial two-channel digital signal synthesizer and a synchronous detector. The bridge can perform comparisons between impedances having arbitrary phase and magnitude ratio: its balance is achieved automatically in less than a minute. $R$-$C$ comparisons with calibrated standards, at kHz frequency and 100...

  11. Force generated by actomyosin contraction builds bridges between adhesive contacts

    OpenAIRE

    Rossier, Olivier M.; Gauthier, Nils; Biais, Nicolas; Vonnegut, Wynn; Fardin, Marc-Antoine; Avigan, Philip; Heller, Evan R; Mathur, Anurag; Ghassemi, Saba; Koeckert, Michael S; Hone, James C.; Sheetz, Michael P.

    2010-01-01

    Extracellular matrices in vivo are heterogeneous structures containing gaps that cells bridge with an actomyosin network. To understand the basis of bridging, we plated cells on surfaces patterned with fibronectin (FN)-coated stripes separated by non-adhesive regions. Bridges developed large tensions where concave cell edges were anchored to FN by adhesion sites. Actomyosin complexes assembled near those sites (both actin and myosin filaments) and moved towards the centre of the non-adhesive ...

  12. Jointless and Smoother Bridges: Behavior and Design of Piles

    OpenAIRE

    Frosch, Robert J; Chovichien, Voraniti; Durbin, Katrinna; Fedroff, David

    2006-01-01

    Integral abutment bridges have been used in the United States for decades. By eliminating expensive expansion joints, the piles supporting the end bent accommodate the total thermal movement of the bridge. Currently, integral bridges are designed based upon experience, and a rational design specification has not been developed. Furthermore, the interaction of the abutment, pile, and soil remains uncertain. A better understanding regarding the behavior of this system is needed. The objective o...

  13. The number of capillary bridges in a wet granular medium

    OpenAIRE

    Geromichalos, Dimitrios; Kohonen, Mika M.; Scheel, Mario; Herminghaus, Stephan

    2003-01-01

    We observed the appearance of capillary bridges in a granular medium consisting of glass beads after adding small amounts of liquid. We found the initial bridge formation depending on the bead roughness. Furthermore we obtained a statistics for the average number of bridges for randomly packed beads in dependence of the liquid content and were able to find an explanation therefore based on recent models and former experimental data.

  14. Electron Transfer rate between a electrode and a bridged redox

    OpenAIRE

    Cruz, A. V. B.; Mishra, A. K.; Schmickler, W.

    2009-01-01

    We derive an explict bias dependent expression for electron transfer reaction rate from a solvated redox to a electrode through a bridged molecule of arbitrary length. The interaction of the solvated redox with the solvent is modelled as a classical harmonic oscillator bath. The effect of competing process, namely resonance tunneling between redox and bridge and the solvation of the redox is investigated. Plots were produced for the case of 5 atom bridge. Our analysis shows that for certain s...

  15. Commutation Processes in Multiresonant ZVS Bridge Converter

    Directory of Open Access Journals (Sweden)

    Miroslaw Luft

    2008-01-01

    Full Text Available The analysis of the multiresonant ZVS DC/DC bridge converter is presented. The control system of the converter is basedon the method of frequency control at the constant time of transistor turn-off with a phase shift. The operation of the circuit is givenand the operating range of the converter is defined where ZVS switching operation is assured. Control characteristics are given andthe converter’s efficiency is defined. The circuit’s operation is analysed on the basis of results of the converter simulation tests using Simplorer programme.

  16. Bridge connection of quantum Hall elementary devices

    CERN Document Server

    Callegaro, Luca

    2013-01-01

    Multiple-series and multiple-parallel connections of quantum Hall elementary devices allow the realization of multiple or fractional values of the quantized Hall resistance, rejecting the effect of contact and wiring resistances. We introduce here the multiple-bridge connection, which maintains the properties of multiple-series and parallel connections and allows more freedom in the choice of the topology of networks composed of quantum Hall elements, and the design of more efficient quantum Hall array resistance standards (and other devices). As an example, a 5-element network is analyzed in detail.

  17. Fatigue Performance of Bridge Deck Pavement Materials

    Institute of Scientific and Technical Information of China (English)

    WU Shaopeng; ZHANG Guang; HAN Jun; LIU Gang; ZHOU Jie

    2009-01-01

    Three beam samplesof bridge deck pavementwere prepared, with gradationtypes of AC-13, and AC-16 and combined AC-13+AC-16. Four-point bending test was adopted to investigate the fatigue performance of these beam samples. The experimental results indicate that the initial bending stiffness is related to the type of beam sample and testing temperature. Fatigue life of these samples decreases as the increase of the controlled strain level. The AC-13 beam sample exhibits better fatigue resistance and bigger limiting bending strain at the given strain level and temperature. Com-pared with single beam sample, the fatigue performance of combining beam sample is relatively poor.

  18. Comparison of Temperature Loadings of Bridge Girders

    Directory of Open Access Journals (Sweden)

    J. Římal

    2008-01-01

    Full Text Available This paper compares the effect of temperature changes on the superstructure of bridges, above all the effect of non-uniform temperature. Loadings according to standards ESN 73 6203, ENV 1991-1-5 and DIN 1072 are compared here. The paper shows a short summary of temperature loading according to each standard and shows the comparison of bending moments arisen from these temperature loadings on superstructure made from continuous girder from a steel-concrete box girder with a composite concrete slab. With respect to a variety of design processes, the comparison is made without any coefficient of loading, combination or material. 

  19. Why the Water Bridge does not collapse

    CERN Document Server

    Aerov, Artem Anatolievich

    2010-01-01

    In 2007 an interesting phenomenon was discovered: a thread of water, the so-called water bridge (WB), can hang between two glass beakers filled with deionized water if voltage is applied to them. We analyze the available explanations of the WB stability and propose a completely different one: the force that supports the WB is the surface tension of water and the role of electric field is not to allow the WB to reduce its surface energy by means of breaking into separate drops.

  20. Structural health monitoring of bridges in the State of Connecticut

    Institute of Scientific and Technical Information of China (English)

    Chengyin Liu; Joshua Olund; Alan Cardini; Paul D'Attilio; Erie Feldblum; John DeWolf

    2008-01-01

    A joint effort between the Connecticut Department of Transportation and the University of Connecticut has been underway for more than 20 years to utilize various structural monitoring approaches to assess different bridges in Connecticut.This has been done to determine the performance of existing bridges,refine techniques needed to evaluate different bridge components,and develop approaches that can be used to provide a continuous status of a bridge's structural integrity,This paper briefly introduces the background of these studies,with emphasis on recent research and the development of structural health monitoring concepts.This paper presents the results from three different bridge types:a post-tensioned curved concrete box girder bridge,a curved steel box-girder bridge,and a steel multi-girder bridge.The structural health monitoring approaches to be discussed have been successfully tested using field data collected during multi-year monitoring periods,and are based on vibrations,rotations and strains.The goal has been to develop cost-effective strategies to provide critical information needed to manage the State of Connecticut's bridge infrastructure.

  1. Aerodynamic stability of cable-stayed-suspension hybrid bridges

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xin-jun; SUN Bing-nan

    2005-01-01

    Three-dimensional nonlinear aerodynamic stability analysis was applied to study the aerodynamic stability of a cable-stayed-suspension (CSS) hybrid bridge with main span of 1400 meters, and the effects of some design parameters (such as the cable sag, length of suspension portion, cable plane arrangement, subsidiary piers in side spans, the deck form, etc.) on the aerodynamic stability of the bridge are analytically investigated. The key design parameters, which significantly influence the aerodynamic stability of CSS hybrid bridges, are pointed out, and based on the wind stability the favorable structural system of CSS hybrid bridges is discussed.

  2. Assessment of concrete bridge decks with alkali silica reactions

    DEFF Research Database (Denmark)

    Eriksen, Kirsten; Jansson, Jacob; Geiker, Mette Rica

    2008-01-01

    Based on investigations of concrete from an approximately 40 years old bridge a procedure to support the management of maintenance and repair of alkali silica damaged bridges is proposed. Combined petrography and accelerated expansion testing were undertaken on cores from the Bridge at Skovdiget......, Bagsværd, Denmark to provide information on the damage condition as well as the residual reactivity of the concrete. The Danish Road Directory’s guidelines for inspection and assessment of alkali silica damaged bridges will be briefly presented, and proposed modifications will be describe...

  3. Modulating unimolecular charge transfer by exciting bridge vibrations.

    Science.gov (United States)

    Lin, Zhiwei; Lawrence, Candace M; Xiao, Dequan; Kireev, Victor V; Skourtis, Spiros S; Sessler, Jonathan L; Beratan, David N; Rubtsov, Igor V

    2009-12-23

    Ultrafast UV-vibrational spectroscopy was used to investigate how vibrational excitation of the bridge changes photoinduced electron transfer between donor (dimethylaniline) and acceptor (anthracene) moieties bridged by a guanosine-cytidine base pair (GC). The charge-separated (CS) state yield is found to be lowered by high-frequency bridge mode excitation. The effect is linked to a dynamic modulation of the donor-acceptor coupling interaction by weakening of H-bonding and/or by disruption of the bridging base-pair planarity.

  4. Method of tuning a strain gauge full bridge

    International Nuclear Information System (INIS)

    In the strain gauge full bridge consisting of four narrow bridge branches acting as strain gauges a change in cross section of the broadened conductor area between the strain gauges is made. This is achieved by means of a focused laser beam, preferably by using it to cut a gap in the conductor area. This allows the bridge to be tuned extremely finely because the development of the gap can be controlled as a function of the bridge output signal during the cutting procedure. Hence, small changes in resistivity of the broadened conductor area can be achieved in this way. (DG)

  5. Theoretical mechanics: Crowd synchrony on the Millennium Bridge

    Science.gov (United States)

    Strogatz, Steven H.; Abrams, Daniel M.; McRobie, Allan; Eckhardt, Bruno; Ott, Edward

    2005-11-01

    Soon after the crowd streamed on to London's Millennium Bridge on the day it opened, the bridge started to sway from side to side: many pedestrians fell spontaneously into step with the bridge's vibrations, inadvertently amplifying them. Here we model this unexpected and now notorious phenomenon - which was not due to the bridge's innovative design as was first thought - by adapting ideas originally developed to describe the collective synchronization of biological oscillators such as neurons and fireflies. Our approach should help engineers to estimate the damping needed to stabilize other exceptionally crowded footbridges against synchronous lateral excitation by pedestrians.

  6. Geodetic Measurement of Longitudinal Displacements of the Railway Bridge

    Directory of Open Access Journals (Sweden)

    Jaroslav Braun

    2014-06-01

    Full Text Available The paper deals with geodetic measurements of mutual longitudinal displacements ofconstruction of the railway bridge and rails on the bridge in Klášterec nad Oh í.Construction of the bridge is made of steel with a concrete deck, which carries the stonesuperstructure and rails. The bridge is about 100 meters long and expected deformationsare in millimetres. The method of geodetic network with the expected standard deviationsof coordinates about 0.2 mm was chosen. The deformation of the structure was determinedto be 4 mm, the deformation of the rails was determined to be 1 mm, both as a result ofepoch comparison.

  7. Running Safety of Trains under Vessel-Bridge Collision

    Directory of Open Access Journals (Sweden)

    Yongle Li

    2015-01-01

    Full Text Available To optimize the sensor placement of the health monitoring system, the dynamic behavior of the train-bridge system subjected to vessel-collision should be studied in detail firstly. This study thus focuses on the characteristics of a train-bridge system under vessel-bridge collision. The process of the vessel-bridge collision is simulated numerically with a reliable finite element model (FEM. The dynamic responses of a single car and a train crossing a cable-stayed bridge are calculated. It is shown that the collision causes significant increase of the train’s lateral acceleration, lateral wheelset force, wheel unloading rate, and derailment coefficient. The effect of the collision on the train’s vertical acceleration is much smaller. In addition, parametric studies with various train’s positions, ship tonnage, and train speed are performed. If the train is closer to the vessel-bridge collision position or the ship tonnage is larger, the train will be more dangerous. There is a relatively high probability of running danger at a low speed, resulting from longer stay of the train on the bridge. The train’s position, the ship tonnage, and the train speed must be considered when determining the most adverse conditions for the trains running on bridges under vessel-bridge collision.

  8. Measurement evaluation and FEM simulation of bridge dynamics

    OpenAIRE

    Andersson, Andreas; Malm, Richard

    2004-01-01

    The aim of this thesis is to analyse the effects of train induced vibrations in a steel Langer beam bridge. A case study of a bridge over the river Ljungan in Ånge has been made by analysing measurements and comparing the results with a finite element model in ABAQUS. The critical details of the bridge are the hangers that are connected to the arches and the main beams. A stabilising system has been made in order to reduce the vibrations which would lead to increased life length of the bridge...

  9. Dialkylenecarbonate-Bridged Polysilsesquioxanes. Hybrid Organic Sol-Gels with a Thermally Labile Bridging Group

    Energy Technology Data Exchange (ETDEWEB)

    Loy, D.A.; Beach, J.V.; Baugher, B.M.; Assink, R.A.; Shea, K.J.; Tran, J.; Small, J.H.

    1999-04-21

    In this paper, we introduce a new approach for altering the properties of bridged polysilsesquioxane xerogels using post-processing modification of the polymeric network. The bridging organic group contains latent functionalities that can be liberated thermally, photochemically, or by chemical means after the gel has been processed to a xerogel. These modifications can produce changes in density, volubility, porosity, and or chemical properties of the material. Since every monomer possesses two latent functional groups, the technique allows for the introduction of high levels of functionality in hybrid organic-inorganic materials. Dialkylenecarbonate-bridged polysilsesquioxane gels were prepared by the sol-gel polymerization of bis(triethoxysilylpropyl)carbonate (1) and bis(triethoxysilylisobutyl)-carbonate (2). Thermal treatment of the resulting non-porous xerogels and aerogels at 300-350 C resulted in quantitative decarboxylation of the dialkylenecarbonate bridging groups to give new hydroxyalkyl and olefinic substituted polysilsesquioxane monolithic xerogels and aerogels that can not be directly prepared through direct sol-gel polymerization of organotrialkoxysilanes.

  10. Vibration analysis of the Second Saikai Bridge—a concrete filled tubular (CFT) arch bridge

    Science.gov (United States)

    Yoshimura, Mistuhiro; Wu, Qingxiong; Takahashi, Kazuo; Nakamura, Shozo; Furukawa, Kazuyoshi

    2006-02-01

    Concrete-filled steel tubular (CFT) arch bridges have been rapidly developing in China since 1990. Research has focused on the static behavior, thermal stress and erection technique, however, and there has been very little research of natural vibrations and dynamic responses of these bridges. Japan's first CFT arch bridge in highway bridges, the Second Saikai Bridge, is now under construction in Nagasaki Prefecture. Furthermore, this bridge has a pedestrian bridge that is suspended under the girder, which is rare. Therefore, the natural vibration properties are examined, and the influence of pedestrian bridge structure on the natural vibration of main bridge is discussed first. Response analysis under a moving vehicle and pedestrian is carried out, and the response characteristics and response level are clarified. The natural vibrations and responses are compared to those of CFT arch bridges that have been constructed in China. Results show the fine performance of both main bridge and pedestrian bridge of the Second Saikai Bridge.

  11. Ældre betonbroers bæreevne (Load bearing capacity of old concrete bridges)

    DEFF Research Database (Denmark)

    Nielsen, Anders

    1999-01-01

    Two old bridges have been analysed in connection with their demolition. The first one is a pedestrian bridge, the Gefion bridge, from 1894. This is the first bridge of reinforced concrete in Denmark. Here the creep in the concrete severely have changed the way in which the load on the bridge was ...

  12. Building Better Bridges: An Evaluation of The Bridge to the Ph.D. Program

    Science.gov (United States)

    Ellyn Sanderson, Robyn; Lobel, Caroline; Agueros, Marcel A.; Anderson, Vanessa; Ash, Summer; Purdie-Vaughns, Valerie; Romero-Canyas, Rainer; Walker, Erica

    2016-01-01

    Columbia University's Bridge to the Ph.D. in the Natural Sciences Program is increasing the number of underrepresented scholars entering graduate programs and equipping them to succeed in these programs. In a given year, three to five Bridge participants are hired as full-time Columbia University research assistants for up to two years. Now in its seventh year, the Program supports seven participants, and its alumni (including five astronomers) have gone on to Ph.D. programs across the country. Although to date fewer than 40 people have participated in the Program, a number too small for an exclusively statistical evaluation of its effectiveness, we are collecting invaluable longitudinal data on the career progressions of underrepresented aspiring scientists across the natural sciences. At least a dozen Bridge alumni will earn their Ph.D. in the next two-three years, and we will then learn much more about the impact that the Bridge Program has had on our participants' trajectories. Among other things, we hope to use these data to determine the Program's effectiveness in developing feelings of self-efficacy and participants' confidence in their ability to succeed in doctoral programs, to measure the rate at which Bridge alumni successfully complete doctoral programs relative to their peers, and to identify the aspects of the Program that participants find most helpful to their progress at different stages of their paths to and through doctoral programs. Here we describe the data we have already obtained as part of our on-going study, and preliminary results from our analysis.

  13. The iron abundance of the Magellanic Bridge

    CERN Document Server

    Dufton, P L; Thompson, H M A; Street, R A

    2008-01-01

    High-resolution HST ultra-violet spectra for five B-type stars in the Magellanic Bridge and in the Large and Small Magellanic Clouds have been analysed to estimate their iron abundances. Those for the Clouds are lower than estimates obtained from late-type stars or the optical lines in B-type stars by approximately 0.5 dex. This may be due to systematic errors possibly arising from non-LTE effects or from errors in the atomic data as similar low Fe abundances having previously been reported from the analysis of the ultra-violet spectra of Galactic early-type stars. The iron abundance estimates for all three Bridge targets appear to be significantly lower than those found for the SMC and LMC by approximately -0.5 dex and -0.8 dex respectively and these differential results should not be affected by any systematic errors present in the absolute abundance estimates. These differential iron abundance estimates are consistent with the underabundances for C, N, O, Mg and Si of approximately -1.1 dex relative to our...

  14. A review of bridge scour monitoring techniques

    Institute of Scientific and Technical Information of China (English)

    L.J. Prendergast; K. Gavin

    2014-01-01

    The high profile failure of the Malahide Viaduct in Dublin, Ireland, which is a part of the EU TEN-T network of critical transport links, was caused by foundation scour. Scour is a common soil-structure interaction problem. In light of current changes in climate, increasing frequency of flooding, coupled with the increasing magnitude of these flood events, will lead to a higher risk of bridge failure. Moni-toring scour is of paramount importance to ensure the continued safe operation of the aging bridge asset network. Most monitoring regimes are based on expensive underwater instrumentation that can often be subjected to damage during times of flooding, when scour risk is at its highest. This paper presents a critical review of existing scour monitoring equipments and methodologies with a particular focus on those using the dynamic response of the structure to indicate the existence and severity of the scour phenomenon affecting the structure. A sensitivity study on a recently developed monitoring method is also undertaken.

  15. Bridging physics and biology teaching through modeling

    Science.gov (United States)

    Hoskinson, Anne-Marie; Couch, Brian A.; Zwickl, Benjamin M.; Hinko, Kathleen A.; Caballero, Marcos D.

    2014-05-01

    As the frontiers of biology become increasingly interdisciplinary, the physics education community has engaged in ongoing efforts to make physics classes more relevant to life science majors. These efforts are complicated by the many apparent differences between these fields, including the types of systems that each studies, the behavior of those systems, the kinds of measurements that each makes, and the role of mathematics in each field. Nonetheless, physics and biology are both sciences that rely on observations and measurements to construct models of the natural world. In this article, we propose that efforts to bridge the teaching of these two disciplines must emphasize shared scientific practices, particularly scientific modeling. We define modeling using language common to both disciplines and highlight how an understanding of the modeling process can help reconcile apparent differences between the teaching of physics and biology. We elaborate on how models can be used for explanatory, predictive, and functional purposes and present common models from each discipline demonstrating key modeling principles. By framing interdisciplinary teaching in the context of modeling, we aim to bridge physics and biology teaching and to equip students with modeling competencies applicable in any scientific discipline.

  16. Photomagnetism in cyano-bridged bimetal assemblies.

    Science.gov (United States)

    Ohkoshi, Shin-ichi; Tokoro, Hiroko

    2012-10-16

    The study of photoinduced phase-transition materials has implications for the fields of inorganic chemistry, solid-state chemistry, and materials science. Cyano-bridged bimetal assemblies are promising photomagnetic materials. Because cyano-bridged bimetal assemblies possess various absorption bands in the visible light region, their electronic and spin states can be controlled by visible light irradiation. Moreover, the selection of magnetic metal ions and organic ligands provide a way of controlling spin-spin interactions through a cyano bridge. In this Account, we describe cyano-bridged bimetal assemblies developed in our laboratory. Cu(II)(2)[Mo(IV)(CN)(8)]·8H(2)O (CuMo), Rb(I)Mn(II)[Fe(III)(CN)(6)] (RbMnFe), and Co(II)(3)[W(V)(CN)(8)](2)·(pyrimidine)(4)·6H(2)O (CoW) induce photomagnetism via photoinduced metal-to-metal charge transfers (MM'CT), while Fe(II)(2)[Nb(IV)(CN)(8)]·(4-pyridinealdoxime)(8)·2H(2)O (FeNb) exhibits a photoinduced magnetization via a photoinduced spin crossover. Irradiation with 473 nm light causes the CuMo system to exhibit a spontaneous magnetization with a Curie temperature (T(C)) of 25 K, but irradiation with 532, 785, and 840 nm light reduces the magnetization. In this reversible photomagnetic process, excitation of the MM'CT from Mo(IV) to Cu(II) produces a ferromagnetic mixed-valence isomer of Cu(I)Cu(II)[Mo(V)(CN)(8)]·8H(2)O (CuMo'). CuMo' returns to CuMo upon irradiation in the reverse-M'MCT band. RbMnFe shows a charge transfer (CT)-induced phase transition from the Mn(II)-Fe(III) phase to the Mn(III)-Fe(II) phase. Irradiation with 532 nm light converts the Mn(III)-Fe(II) phase into the Mn(II)-Fe(III) phase, and we observe photodemagnetization. In contrast, irradiation of the Mn(II)-Fe(III) phase with 410 nm light causes the reverse phase transition. A CT-induced Jahn-Teller distortion is responsible for this visible light-induced reversible photomagnetic effect. In the CoW system, a CT-induced spin transition causes the

  17. Critical traffic loading for the design of prestressed concrete bridge

    International Nuclear Information System (INIS)

    A study has been carried out to determine critical traffic loadings for the design of bridge superstructures. The prestressed concrete girder bridge already constructed in Lahore is selected for the analysis as an example. Standard traffic loadings according to AASHTO (American Association of State Highway and Transportation Officials) and Pakistan Highway Standards are used for this purpose. These include (1) HL-93 Truck, (2) Lane and (3) Tandem Loadings in addition to (4) Military tank loading, (5) Class-A, (6) Class-B and (7) Class-AA loading, (8) NLC (National Logistic Cell) and (9) Volvo truck loadings. Bridge superstructure including transom beam is analyzed Using ASD and LRFD (Load and Resistance Factor Design) provisions of AASHTO specifications. For the analysis, two longer and shorter spans are selected. This includes the analysis of bridge deck; interior and exterior girder; a typical transom beam and a pier. Dead and live loading determination is carried out using both computer aided and manual calculations. Evaluation of traffic loadings is done for all the bridge components to find out the critical loading. HL-93 loading comes out to be the most critical loading and where this loading is not critical in case of bridge decks; a factor of 1.15 is introduced to make it equivalent with HL-93 -Ioading. SAP-2000 (Structural Engineering Services of Pakistan) and MS-Excel is employed for analysis of bridge superstructure subjected to this loading. Internal forces are obtained for the structural elements of the bridge for all traffic loadings mentioned. It is concluded that HL-93 loading can be used for the design of prestressed concrete girder bridge. Bridge design authorities like NHA (National Highway Authority) and different cities development authorities are using different standard traffic loadings. A number of suggestions are made from the results of the research work related to traffic loadings and method of design. These recommendations may be

  18. 77 FR 6170 - Buy America Waiver Notification

    Science.gov (United States)

    2012-02-07

    ...'') for rehabilitation of the Congress Parkway Bascule Bridge over the South Branch of the Chicago River... inconsistent with the public interest or when satisfactory quality domestic steel and iron products are not... Federal Highway Administration Buy America Waiver Notification AGENCY: Federal Highway...

  19. Study of behavior of hanging bridges type Pony

    OpenAIRE

    Caori Patricia Takeuchi Tam; Beatriz Elena León; Mario Alberto González

    2010-01-01

    In the country there is a great quantity of hanging bridges type pony. This article presents the methodology and the results obtained in a study of the behavior of this type of bridges for the construction and the service loads. Besides, the behavior of the lateral stability of these models.

  20. Efficient photoinduced energy transfer mediated by aromatic homoconjugated bridges

    NARCIS (Netherlands)

    J. Osío Barcina; N. Herrero-García; F. Cucinotta; L. De Cola; P. Contreras-Carballada; R.M. Williams

    2010-01-01

    A new donor bridge acceptor (D-B-A) dyad consisting of ruthenium(II) and iridium(III) species separated by an homoconjugated bridge derived from 7,7-diphenylnorbornane [Ir-Nor-Ru](3+) has been synthesised. The photophysical and electrochemical properties of the heterodinuclear complex have been comp

  1. Fatigue assessment for deck plates in orthotropic bridge decks

    NARCIS (Netherlands)

    Maljaars, J.; Dooren, F. van; Kolstein, H.

    2012-01-01

    Since the 1960s, orthotropic deck plates of highway bridges have been built with large coldformed trapezoidal stiffeners supporting a deck plate with a thickness of approx. 12 mm. The maximum cross-beam spacing is approx. 4 m. A number of these bridge decks in The Netherlands suffer from fatigue cra

  2. Operational modal analysis of road-rail bridge

    Directory of Open Access Journals (Sweden)

    Cardoso M.

    2015-01-01

    Full Text Available In this paper, we describe an Operational Modal Analysis (OMA of the Bridge over the Tocantins River, a composite road-rail bridge located in the city of Marabá, state of Pará, northern Brazil. The bridge is part of the Carajás Railway, which is used by VALE Company to transport iron ore from “Serra dos Carajás”, the largest mineral reserve of the planet. The bridge has a length of 2310m, being the second longest road-rail bridge in Brazil. The study focused on the bridge central span (with 77 m of length and two adjacent spans (with 44 m of length. We employed Piezo-electric accelerometers to measure the dynamic response of the bridge under ambient excitation, which consisted of the passage of loaded and unloaded trains, road traffic, wind and river current. For modal identification, to avoid the influence of the train mass over the bridge system, we only considered acceleration signals of road traffic and signals corresponding to intervals after the passage of loaded trains, i.e., the study disregarded the intervals during which the trains were over the monitored spans. We obtained modal parameters through two identification methods: one in the time domain and other in the frequency domain. We also performed a comparative analysis between the experimental modal parameters, and the numerical results obtained with a finite element model provided by a third-part company.

  3. Comparison of Ferry Boat and Highway Bridge Energy Use

    Directory of Open Access Journals (Sweden)

    Wayne D. Cottrell

    2011-01-01

    Full Text Available Passenger ferries serve a variety of transport needs in the U.S., such as providing vital links across bodies of water, and supplementing highway bridges. In some cases in which there is a ferry connection but no bridge, a bridge would be impractical; in other cases, a bridge might be feasible. The paper compares the energy consumption of ferries and motor vehicles on bridges, to determine which link is more fuel efficient. One finding is that limited data are available on ferry boat fuel consumption: despite there being 208 ferry boat operators in the U.S. as of 2008, only eight were providing energy use data to the National Transit Database. Examinations of three of the systems found that the passenger-MPG of the ferries ranged from 2.61 to 14.00 (1.11 to 5.95 km/L, while that of the motor vehicles on adjacent highway bridge connections ranged from 25.34 to 32.45 (10.77 to 13.79 km/L. Data from the eight systems are used to develop a ferry MPG model. The model is used to show that the Ryer Island and Charles Hall Ferries are less fuel efficient than hypothetical bridges in those locations. The fuel efficiencies and consumptions of the ferries would equal those of motor vehicles on the bridges, however, if smaller vessels were used, and if the frequency of service was reduced.

  4. Very High Frequency Half Bridge DC/DC Converter

    DEFF Research Database (Denmark)

    Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.

    2014-01-01

    This paper presents the first, off chip, class DE (resonant half bridge) converter working in the Very High Frequency (VHF) range. The benefits of using half bridge circuits both in the inverter and rectifier part of a VHF resonant dc/dc converter are analyzed and design equations for all...

  5. Multidisciplinary health monitoring of a steel bridge deck structure

    NARCIS (Netherlands)

    Pahlavan, L.; Pijpers, R.J.M.; Paulissen, J.H.; Hakkesteegt, H.C.; Jansen, T.H.

    2013-01-01

    Fatigue cracks in orthotropic bridge decks are an important cause for the necessary renovation of existing bridges. Parallel utilization of various technologies based on different physical sensing principles can potentially maximize the efficiency of structural health monitoring (SHM) systems for th

  6. OnWien Bridge Oscillators as Modified Multi-vibrators

    DEFF Research Database (Denmark)

    Lindberg, Erik

    2014-01-01

    A tutorial introduction to electrical oscilla- tors. Investigating Wien bridge oscillators as modified multi-vibrators. Introducing chaotic behavior into a Wien bridge oscillator by means of adding a simple nonlinear cir- cuit as a load of one of the amplifier input terminals...

  7. Assessment of the Reliability Profiles for Concrete Bridges

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper calculation of reliability profiles is discussed. ULS as well as SLS limit states are formulated. Corrosion due to chloride penetration is the considered deterioration mechanism. Three models for corrosion are formulated. A definition of service lifetime for concrete bridges...... is presented and discussed. The proposed method of calculating reliability profiles is illustrated on an exiting U.K. bridge....

  8. GOOD HEALTH AND THE BRIDGING OF STRUCTURAL HOLES.

    Science.gov (United States)

    Cornwell, Benjamin

    2009-01-01

    Bridges that span structural holes are often explained in terms of the entrepreneurial personalities or rational motivations of brokers, or structural processes that lead to the intersection of social foci. I argue that the existence and use of bridges in interpersonal networks also depends on individuals' health. Poor health may make it more difficult to withstand the pressures and to execute some of the common tasks associated with bridging (e.g., brokerage). I examine this possibility using egocentric network data on over 2,500 older adults drawn from the recent National Social Life, Health, and Aging Project (NSHAP). Multivariate regression analyses show that both cognitive and functional health are significantly positively associated with bridging, net of sociodemographic and life-course controls. The relationship between functional (kinesthetic) health and bridging appears to be partially mediated by network composition, as older adults who have poorer functional health also tend to have networks that are richer in strong ties. Several potential mediation mechanisms are discussed. Cognitive function remains significantly associated with bridging net of network composition, suggesting that the inherent challenges of maintaining bridging positions may be more difficult to cope with for those who have cognitive impairments than for those who have functional impairments such as limited mobility. An alternative explanation is that cognitively impaired individuals have more difficulty recognizing (and thus strategically using) bridges in their networks. Theoretical implications and possibilities for future research are discussed. PMID:20046998

  9. Impact of bridge pier on the stability of ice jam

    Institute of Scientific and Technical Information of China (English)

    王军; 施发义; 陈胖胖

    2015-01-01

    River ice jam is one of the most important issues in rivers in cold regions during winter time. With the extra solid boundary due to the ice cover, the flow condition under ice-covered conditions is completely different from that of a open channel flow. The presence of bridge piers will further change the velocity field around the bridge piers. As a consequence, the formation and the accumulation of ice jams in the vicinity of the bridge pier will be affected. On the other side, the formation of an ice jam around the piers can cause extra turbulence to reduce the stability of a river bridge. The present study focuses on the stress analysis of the ice jam in the vicinity of a bridge pier. By developing a governing equation for describing the equilibrium state of an ice jam, the stability of the ice jam around bridge piers is analyzed and determined. As seen from the field data in literature, the stability estimations of an ice jam around bridge piers determined by the present method agree well with the field observations. Therefore, the proposed approach can be used for the prediction of the formation of ice jams around bridge piers.

  10. Introduction of New Book: Scouring at Bridge Crossings

    Institute of Scientific and Technical Information of China (English)

    Hongwu Zhang

    2005-01-01

    @@ Mr. Kan Yi's book Scouring at Bridge Crossings, based on a large amount of field survey data, field investigation data and laboratory test data, has been published by China Railway Publishing House on August 2004 in Beijing. It is a monographic writing on scouring at bridge crossings.

  11. Building New Bridges: Linking Organization Theory with Other Educational Literatures

    Science.gov (United States)

    Johnson, Bob L., Jr.; Owens, Michael

    2005-01-01

    Purpose: This paper provides an example of how organization theory can be linked with other literatures in a complementary and productive manner. Establishing a bridge between the organization theory and learning environment literatures, the authors seek to provide an example of how such literature-bridging can enrich our understanding of the…

  12. Review on antibacterial characteristics of bridge engineering biomaterials.

    Science.gov (United States)

    Zhao, Qing-Qing; Chen, Meng-Yao; He, Rui-Lin; Zhang, Zhong-Feng; Ashraf, Muhammad Aqeel

    2016-01-01

    This review summarizes the research on timber construction materials used in bridge construction. It focuses on the application of antiseptic treatments and the use of timber engineering materials in decks and bridges. This review also provides an overview on the future research and prospects of engineered timber materials. PMID:26858558

  13. The South Carolina bridge-scour envelope curves

    Science.gov (United States)

    Benedict, Stephen T.; Feaster, Toby D.; Caldwell, Andral

    2016-09-30

    The U.S. Geological Survey, in cooperation with the South Carolina Department of Transportation, conducted a series of three field investigations to evaluate historical, riverine bridge scour in the Piedmont and Coastal Plain regions of South Carolina. These investigations included data collected at 231 riverine bridges, which lead to the development of bridge-scour envelope curves for clear-water and live-bed components of scour. The application and limitations of the South Carolina bridge-scour envelope curves were documented in four reports, each report addressing selected components of bridge scour. The current investigation (2016) synthesizes the findings of these previous reports into a guidance manual providing an integrated procedure for applying the envelope curves. Additionally, the investigation provides limited verification for selected bridge-scour envelope curves by comparing them to field data collected outside of South Carolina from previously published sources. Although the bridge-scour envelope curves have limitations, they are useful supplementary tools for assessing the potential for scour at riverine bridges in South Carolina.

  14. Wind Tunnel Testing of Active Control System for Bridges

    DEFF Research Database (Denmark)

    Hansen, Henriette I.; Thoft-Christensen, Palle

    This paper describes preparation of wind tunnel testing of the principle of using flaps to control the motion of suspension bridges. The experiment will take place at the Instituto Superior Technico Lisbon, Portugal. The bridge section model is constructed of foam with an aluminium frame. The flaps...

  15. Fatigue classification of welded joints in orthotropic steel bridge decks

    NARCIS (Netherlands)

    Kolstein, M.H.

    2007-01-01

    This dissertation presents the research into fatigue classifications of welded joints in orthotropic steel bridge decks. These classifications are needed to calculate the fatigue life of these joints and should be included in the design codes. For years bridge design was mainly based on static loadi

  16. Application of Artificial Intelligence for Bridge Deterioration Model.

    Science.gov (United States)

    Chen, Zhang; Wu, Yangyang; Li, Li; Sun, Lijun

    2015-01-01

    The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention.

  17. Anthropogenic sources stimulate resonance of a natural rock bridge

    Science.gov (United States)

    Moore, Jeffrey R.; Thorne, Michael S.; Koper, Keith D.; Wood, John R.; Goddard, Kyler; Burlacu, Relu; Doyle, Sarah; Stanfield, Erik; White, Benjamin

    2016-09-01

    The natural modes of vibration of bedrock landforms, as well as the sources and effects of stimulated resonance remain poorly understood. Here we show that seismic energy created by an induced earthquake and an artificial reservoir has spectral content coincident with the natural modes of vibration of a prominent rock bridge. We measured the resonant frequencies of Rainbow Bridge, Utah using data from two broadband seismometers placed on the span, and identified eight distinct vibrational modes between 1 and 6 Hz. A distant, induced earthquake produced local ground motion rich in 1 Hz energy, stimulating a 20 dB increase in measured power at the bridge's fundamental mode. Moreover, we establish that wave action on Lake Powell, an artificial reservoir, generates microseismic energy with peak power ~1 Hz, also exciting resonance of Rainbow Bridge. These anthropogenic sources represent relatively new energy input for the bridge with unknown consequences for structural fatigue.

  18. Vibration characteristics and damage detection in a suspension bridge

    Science.gov (United States)

    Wickramasinghe, Wasanthi R.; Thambiratnam, David P.; Chan, Tommy H. T.; Nguyen, Theanh

    2016-08-01

    Suspension bridges are flexible and vibration sensitive structures that exhibit complex and multi-modal vibration. Due to this, the usual vibration based methods could face a challenge when used for damage detection in these structures. This paper develops and applies a mode shape component specific damage index (DI) to detect and locate damage in a suspension bridge with pre-tensioned cables. This is important as suspension bridges are large structures and damage in them during their long service lives could easily go un-noticed. The capability of the proposed vibration based DI is demonstrated through its application to detect and locate single and multiple damages with varied locations and severity in the cables of the suspension bridge. The outcome of this research will enhance the safety and performance of these bridges which play an important role in the transport network.

  19. Solving Topological and Geometrical Constraints in Bridge Feature Model

    Institute of Scientific and Technical Information of China (English)

    PENG Weibing; SONG Liangliang; PAN Guoshuai

    2008-01-01

    The capacity that computer can solve more complex design problem was gradually increased.Bridge designs need a breakthrough in the current development limitations, and then become more intelli-gent and integrated. This paper proposes a new parametric and feature-based computer aided design (CAD) models which can represent families of bridge objects, includes knowledge representation, three-dimensional geometric topology relationships. The realization of a family member is found by solving first the geometdc constraints, and then the topological constraints. From the geometric solution, constraint equations are constructed. Topology solution is developed by feature dependencies graph between bridge objects. Finally, feature parameters are proposed to drive bridge design with feature parameters. Results from our implementation show that the method can help to facilitate bridge design.

  20. Statistical Analysis of Ship Collisions with Bridges in China Waterway

    Institute of Scientific and Technical Information of China (English)

    DAI Tong-yu; NIE Wu; LIU Ying-jie; WANG Li-ping

    2002-01-01

    Having carried out investigations on ship collision accidents with bridges in waterway in China, a database of ship collision with bridge (SCB) is developed in this paper. It includes detailed information about more than 200 accidents near ship's waterways in the last four decades, in which ships collided with the bridges. Based on the information a statistical analysis is presented tentatively. The increase in frequency of ship collision with bridges appears, and the accident quantity of the barge system is more than that of single ship. The main reason of all the factors for ship collision with bridge is the human errors, which takes up 70%. The quantity of the accidents happened during flooding period shows over 3~6 times compared with the period from March to June in a year. The probability follows the normal distribution according to statistical analysis. Visibility, span between piers also have an effect on the frequency of the accidents.

  1. A CAD/CAM system for operating overburden conveyor bridges

    Energy Technology Data Exchange (ETDEWEB)

    Pause, M.; Nadeborn, H.; Klus, R.

    1988-01-01

    Reviews introduction of computer systems for control of conveyor bridges for overburden removal in GDR brown coal surface mines. Three F 60 high capacity bridges at Welzow, Nochten and Jaenschwalde have been automated since 1978, achieving a 10% increase in annual production. A pilot project of complex automation of a F 45 brige at the Meuro mine was started to fully automate bridge movement according to continuous mine geometrical digital survey data. Hardware employed is the U 5000 control system with various peripheral equipment, the A 5120 office computer and the EC 1040 data processing unit. Automation of the Meuro bridge resulted in an annual economic benefit of 2.8 million Marks. A new, fourth F 60 bridge for which a CAD/CAM system based on the U 5000 and K 1520 computer systems is being developed will begin operation at the Reichwalde mine.

  2. Advanced aerostatic analysis of long-span suspension bridges

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    As the span length of suspension bridges increases, the diameter of cables and thus the wind load acting on them, the nonlinear wind-structure interaction and the wind speed spatial non-uniformity all increase consequently, which may have unnegligible influence on the aerostatic behavior of long-span suspension bridges. In this work, a method of advanced aerostatic analysis is presented firstly by considering the geometric nonlinearity, the nonlinear wind-structures and wind speed spatial non-uniformity. By taking the Runyang Bridge over the Yangtze River as example, effects of the nonlinear wind-structure interaction, wind speed spatial non-uniformity, and the cable's wind load on the aerostatic behavior of the bridge are investigated analytically. The results showed that these factors all have important influence on the aerostatic behavior, and should be considered in the aerostatic analysis of long and particularly super long-span suspension bridges.

  3. Use of UHPC in Bridge Structures: Material Modeling and Design

    Directory of Open Access Journals (Sweden)

    Oguz Gunes

    2012-01-01

    Full Text Available Ultra-high-performance concrete (UHPC is a promising new class of concrete material that is likely to make a significant contribution to addressing the challenges associated with the load capacity, durability, sustainability, economy, and environmental impact of concrete bridge infrastructures. This paper focuses on the material modeling of UHPC and design of bridge girders made of UHPC. A two-phase model used for modeling the behavior of UHPC was briefly discussed, and the model was implemented in a preliminary design case study. Based on the implemented design and the reported use of UHPC in bridge applications, the advantages, limitations, and future prospects of UHPC bridges were discussed, highlighting the need for innovative research and design to make optimum use of the favorable properties of the material in bridge structures.

  4. Vigorous convection in a sunspot granular light bridge

    CERN Document Server

    Lagg, Andreas; van Noort, Michiel; Danilovic, Sanja

    2014-01-01

    Light bridges are the most prominent manifestation of convection in sunspots. The brightest representatives are granular light bridges composed of features that appear to be similar to granules. An in-depth study of the convective motions, temperature stratification, and magnetic field vector in and around light bridge granules is presented with the aim of identifying similarities and differences to typical quiet-Sun granules. Spectropolarimetric data from the Hinode Solar Optical Telescope were analyzed using a spatially coupled inversion technique to retrieve the stratified atmospheric parameters of light bridge and quiet-Sun granules. Central hot upflows surrounded by cooler fast downflows reaching 10 km/s clearly establish the convective nature of the light bridge granules. The inner part of these granules in the near surface layers is field free and is covered by a cusp-like magnetic field configuration. We observe hints of field reversals at the location of the fast downflows. The quiet-Sun granules in ...

  5. Application of Artificial Intelligence for Bridge Deterioration Model

    Directory of Open Access Journals (Sweden)

    Zhang Chen

    2015-01-01

    Full Text Available The deterministic bridge deterioration model updating problem is well established in bridge management, while the traditional methods and approaches for this problem require manual intervention. An artificial-intelligence-based approach was presented to self-updated parameters of the bridge deterioration model in this paper. When new information and data are collected, a posterior distribution was constructed to describe the integrated result of historical information and the new gained information according to Bayesian theorem, which was used to update model parameters. This AI-based approach is applied to the case of updating parameters of bridge deterioration model, which is the data collected from bridges of 12 districts in Shanghai from 2004 to 2013, and the results showed that it is an accurate, effective, and satisfactory approach to deal with the problem of the parameter updating without manual intervention.

  6. Simulation of the Whole Process of Ship-Bridge Collision

    Institute of Scientific and Technical Information of China (English)

    刘建成; 顾永宁

    2002-01-01

    The simulation of the whole ship-bridge collision process can be effectively carried out by nonlinear dynamic finiteelement method. Based on the simple description of the theory, a scenario of a 40000 DWT oil tanker colliding with abridge across the Yangtze River is designed for simulation. The technology of structure modeling and the determination ofrelated parameters are introduced. The deformation of the bulb bow, the history of collision force change, the exchange ofcollision energy and the stress distribution of the bridge pier are described in detail, which are of great value to bridge de-sign and bridge pier damage estimation, Some mechanical characters in the process of ship-bridge collision are described.More accurate results can be produced by finite element method than that by empirical formulas and simplified analyticalmethods.

  7. Several solutions of remote transmission for state monitoring of bridges

    Institute of Scientific and Technical Information of China (English)

    LIANG Zong-bao; CHEN Wei-min; ZHU Yong; FU Yu-mei; XU Mou; YANG Hong

    2005-01-01

    The research for remote monitoring of bridges is expected to develop methodologies and tools for collecting state data, monitoring the real-time status of the bridge from distance, and more importantly seeking a best way for remote transmission of bridge monitoring system by comparing the characteristics of each scheme. This paper focuses on the solutions to remote transmission for state monitoring of bridges, which deals with the remote transmission system based on PSTN (Public Service Telephone Network), wireless sensor monitoring system and remote transmission using SDH (Synchronous Digital Hierarchy) network. As a result, a combination of wireless sensor monitoring system and the remote sensing system using SDH network is proposed to be the considered way for remote state monitoring of bridges.

  8. EXPERIMENTAL STUDY OF THE MORPHOLOGY OF CEREBRAL BRIDGING VEIN

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Objective. To investigate the morphological properties of pig cerebral bridging vein. Methods. The morphology and fibre arrangement of 15 cerebral bridging veins obtained from 7 Danish Yorkshire landrace pigs were observed. Results. There was a narrow region at the junction of the cerebral bridging veins and superior sagittal sinus termed “ outflow cuff segment". The diameter and length of outflow cuff segment were much smaller and the thickness was higher than those of the cerebral bridging veins (P0.05). Conclusions. There were differences in fibre arrangement and morphological properties between the outflow cuff segment and the cerebral bridging vein, just like a resistance valve, the outflow cuff segment may play an important role in stabilizing cerebral venous outflow and regulating intracranial pressure.

  9. Floating and flying ferrofluid bridges induced by external magnetic fields

    Science.gov (United States)

    Ma, Rongchao; Zhou, Yixin; Liu, Jing

    2015-04-01

    A ferrofluid is a mixture that exhibits both magnetism and fluidity. This merit enables the ferrofluid to be used in a wide variety of areas. Here we show that a floating ferrofluid bridge can be induced between two separated boards under a balanced external magnetic field generated by two magnets, while a flying ferrofluid bridge can be induced under an unbalanced external magnetic field generated by only one magnet. The mechanisms of the ferrofluid bridges were discussed and the corresponding mathematical equations were also established to describe the interacting magnetic force between the ferro particles inside the ferrofluid. This work answered a basic question that, except for the well-known floating water bridges that are related to electricity, one can also build up a liquid bridge that is related to magnetism.

  10. Transient response of piles-bridge under horizontal excitation

    Institute of Scientific and Technical Information of China (English)

    朱斌; 陈仁朋; 陈云敏

    2003-01-01

    Moving ships and other objects drifting on water often impact a bridge' s pile foundations. The mechanical model of the piles-bridge structure under horizontal forcing was established, and a time-domain approach based on Finite-difference Method was developed for analyzing the dynamic response of the piles-bridge structure. For a single pile, good agreement between two computed results validated the present approach.The slenderness ratio of the pile, the pile-soil stiffness ratio and the type of the structure influence the dynamic response of the piles-bridge structure. The computed results showed that the stiffness of the structure determines the dynamic response of the piles-bridge structure under horizontal forcing.

  11. Transient response of piles-bridge under horizontal excitation

    Institute of Scientific and Technical Information of China (English)

    朱斌; 陈仁朋; 陈云敏

    2003-01-01

    Moving ships and other objects drifting on water often impact a bridge's pile foundations. The mechanical model of the piles-bridge structure under horizontal forcing was established, and a time-domain approach based on Finite-difference Method was developed for analyzing the dynamic response of the piles-bridge structure. For a single pile, good agreement between two computed results validated the present approach. The slenderness ratio of the pile, the pile-soil stiffness ratio and the type of the structure influence the dynamic response of the piles-bridge structure. The computed results showed that the stiffness of the structure determines the dynamic response of the piles-bridge structure under horizontal forcing.

  12. Technology and organization in bridge construction by using movable scaffolding system

    OpenAIRE

    Rosa, Simon

    2008-01-01

    The thesis presents construction of a bridge presented on a case study of the Šumljak bridge. The bridge is located on the motorway section Razdrto-Vipava characterized by an extremely complexe morphology and geology, which makes the bridge location one of the most demanding parts to be bridged within the Slovenian National Highway Construction Programme. The "S" shaped bridge axis dictates the use of the field by field construction method on mechanized movable scaffolding. This technology en...

  13. Experimental and Analytical Investigations of Piles and Abutments of Integral Bridges

    OpenAIRE

    Arsoy, Sami

    2000-01-01

    Bridges without expansion joints are called "integral bridges." Eliminating joints from bridges crates concerns for the piles and the abutments of integral bridges because the abutments and the piles are subjected to temperature-induced cyclic lateral loads. As temperatures change daily and seasonally, the lengths of integral bridges increase and decrease, pushing the abutment against the approach fill and pulling it away. As a result the bridge superstructure, the abutment, the approach f...

  14. Influence of the new LRFD seismic guidelines on the design of bridges in Virginia

    OpenAIRE

    M.A. Widjaja; Roberts-Wollmann, Carin L.

    2004-01-01

    The Virginia Department of Transportation is currently using the AASHTO Standard Specifications for Highway Bridges, with some modifications, for its seismic highway bridge design. In April 2001, the Recommended LRFD Guidelines for the Seismic Design of Highway Bridges were published. The influence of the LRFD Guidelines on Virginia bridges was investigated by analyzing two existing bridges. The first bridge has prestressed concrete girders and is located in the Richmond area. The second brid...

  15. IceBridge: Bringing a Field Campaign Home

    Science.gov (United States)

    Woods, J.; Beck, J.; Bartholow, S.

    2015-12-01

    IceBridge, a six-year NASA mission, is the largest airborne survey of Earth's polar ice ever flown. It will yield an unprecedented three-dimensional view of Arctic and Antarctic ice sheets, ice shelves and sea ice. These flights will provide a yearly, multi-instrument look at the behavior of the rapidly changing features of the Greenland and Antarctic ice. Data collected during IceBridge will help scientists bridge the gap in polar observations between NASA's Ice, Cloud and Land Elevation Satellite (ICESat) -- in orbit since 2003 -- and ICESat-2, planned for 2017. ICESat stopped collecting science data in 2009, making IceBridge critical for ensuring a continuous series of observations. IceBridge will use airborne instruments to map Arctic and Antarctic areas once a year at a minimum, with new campaigns being developed during the Arctic melt season. IceBridge flights are conducted in the spring and summer for the Arctic and in the fall over Antarctica. Other smaller airborne surveys around the world are also part of the IceBridge campaign. IceBridge actively engages the public and educators through a variety of outlets ranging from communications strategies through social media outlets, to larger organized efforts such as PolarTREC. In field activities include blog posts, photo updates, in flight chat sessions, and more intensive live events to include google hangouts, where field team members can interact with the public during a scheduled broadcast. The IceBridge team provides scientists and other team members with the training and support to become communicators in their own right. There is an exciting new initiative where IceBridge will be collaborating with Undergraduate and Graduate students to integrate the next generation of scientists and communicators into the Science Teams. This will be explored through partnerships with institutions that are interested in mentoring through project based initiatives.

  16. Bridging the gap with flipped classroom

    DEFF Research Database (Denmark)

    Selberg, Hanne; Topperzer, Martha

    2016-01-01

    Bridging the gap with flipped classroom Hanne Selberg, Metropolitan University College, Copenhagen, Martha Topperzer, University Hospital Rigshospitalet, Copenhagen, Denmark Background and aims Consistent with the strategy of increasing digitization and learner-centred teaching models...... in the nursing curriculum, we have reversed selected traditional lectures into simulation based teaching activities embedded in a ten week Pediatric Nursing module for third year nursing students. The current pilot study seeks to explore the impact on students’ learning and commitment when flipping the classroom...... using educational technologies such as online preparation contents and simulation based scenarios. Furthermore, the objective is to enhance theory-practice integration in the educational setting. Materials & Methods The flipped classroom model replaces three theoretical lectures addressing disease...

  17. Bridging Physics and Biology Teaching through Modeling

    CERN Document Server

    Hoskinson, Anne-Marie; Zwickl, Benjamin M; Hinko, Kathleen; Caballero, Marcos D

    2013-01-01

    As the frontiers of biology become increasingly interdisciplinary, the physics education community has engaged in ongoing efforts to make physics classes more relevant to life sciences majors. These efforts are complicated by the many apparent differences between these fields, including the types of systems that each studies, the behavior of those systems, the kinds of measurements that each makes, and the role of mathematics in each field. Nonetheless, physics and biology are both fundamental sciences that rely on observations and measurements to construct models of the natural world. In the present theoretical article, we propose that efforts to bridge the teaching of these two disciplines must emphasize shared scientific practices, particularly scientific modeling. We define modeling using language common to both disciplines and highlight how an understanding of the modeling process can help reconcile apparent differences between physics and biology. We elaborate how models can be used for explanatory, pre...

  18. Bridging Innovation and Curriculum in Higher Education

    DEFF Research Database (Denmark)

    Zhang, Fenzhi; Kolmos, Anette; Du, Xiangyun

    2010-01-01

    As innovation is seen as a key factor in economic competitiveness, graduates who can contribute to and participate in innovation are in great need.. Higher education is confronted with the demands that the curriculum practice and learning environments should facilitate innovation and competences...... for innovation. Problem and project based learning has been seen as a strategy for renewing the teaching practice and the learning environment by integrating the competence demands of the curriculum and of work life during the process of education. However, the integrations of innovation into curriculum...... are minor in the problem and project based learning (PBL) literature. Based on theoretical reflections and practical cases in Aalborg University (Denmark), this article presents the basis of PBL knowledge and curriculum conceptualization, and explores a case experience which bridges innovation and PBL...

  19. Helping System Engineers Bridge the Peaks

    Science.gov (United States)

    Rungta, Neha; Tkachuk, Oksana; Person, Suzette; Biatek, Jason; Whalen, Michael W.; Castle, Joseph; Castle, JosephGundy-Burlet, Karen

    2014-01-01

    In our experience at NASA, system engineers generally follow the Twin Peaks approach when developing safety-critical systems. However, iterations between the peaks require considerable manual, and in some cases duplicate, effort. A significant part of the manual effort stems from the fact that requirements are written in English natural language rather than a formal notation. In this work, we propose an approach that enables system engineers to leverage formal requirements and automated test generation to streamline iterations, effectively "bridging the peaks". The key to the approach is a formal language notation that a) system engineers are comfortable with, b) is supported by a family of automated V&V tools, and c) is semantically rich enough to describe the requirements of interest. We believe the combination of formalizing requirements and providing tool support to automate the iterations will lead to a more efficient Twin Peaks implementation at NASA.

  20. Live-Load Testing and Finite-Element Analysis of a Steel Cantilever Deck Arched Pratt Truss Bridge for the Long-Term Bridge Performance Program

    OpenAIRE

    Laurendeau, Matthew P.

    2011-01-01

    The Long Term Bridge Performance (LTBP) program is an organization within the Federal Highway Administration that inspects, tests, analyzes, and observes, for an extended period of time, a variety of bridge types throughout the United States. Part of the program includes periodic testing of select bridges of a span of 20 years. The Kettle River Bridge located outside of Sandstone, Minnesota was selected for study due to its unique design. The Kettle River Bridge is a historical steel can...

  1. Impact Coefficient Analysis of Long-Span Railway Cable-Stayed Bridge Based on Coupled Vehicle-Bridge Vibration

    Directory of Open Access Journals (Sweden)

    Yongle Li

    2015-01-01

    Full Text Available Compared with medium and small span bridges, very limited attention has been paid on the research of the impact coefficient of long-span railway bridges. To estimate the impact effects of long-span railway bridges subjected to moving vehicles, a real long-span railway cable-stayed bridge is regarded as the research object in this study, and a coupled model of vehicle-bridge system is established. The track irregularities are taken as the system excitation and the dynamic responses of the vehicle-bridge system are calculated. The impact effects on main girder, stayed cable, bearings, and bridge tower are discussed at various vehicle speeds. The results show that different components of the long-span railway cable-stayed bridge have different impact coefficients. Even for each part, the impact coefficient is also different at different local positions. It reveals that the impact coefficients in the actual situation may have significant differences with the related code clauses in the present design codes.

  2. Numerical analysis of dynamic response of vehicle–bridge coupled system on long-span continuous girder bridge

    Directory of Open Access Journals (Sweden)

    Lipeng An

    2016-07-01

    Full Text Available To systematically study the vehicle–bridge coupled dynamic response and its change rule with different parameters, a vehicle model with seven degrees of freedom was built and the total potential energy of vehicle space vibration system was deduced. Considering the stimulation of road roughness, the dynamic response equation of vehicle–bridge coupled system was established in accordance with the elastic system principle of total potential energy with stationary value and the “set-in-right-position” rule. On the basis of the self-compiled Fortran program and bridge engineering, the dynamic response of long-span continuous girder bridge under vehicle load was studied. This study also included the calculation of vehicle impact coefficient, evaluation of vibration comfort, and analysis of dynamic response parameters. Results show the impact coefficient changes with lane number and is larger than the value calculated by the “general code for design of highway bridges and culverts (China”. The Dieckmann index of bridge vibration is also related to lane number, and the vibration comfort evaluation is good in normal conditions. The relevant conclusions from parametric analyses have practical significance to dynamic design and daily operation of long-span continuous girder bridges in expressways. Safety and comfort are expected to improve significantly with further control of the vibration of vehicle–bridge system.

  3. Implementation of a Non-Metallic Reinforced Bridge Deck, Volume 2: Thayer Road Bridge

    OpenAIRE

    Frosch, Robert J.; Pay, Ali Cihan

    2006-01-01

    The primary maintenance problem with bridges in Indiana has been deterioration of the concrete deck which is often related to corrosion of the reinforcing steel. While a corrosion protection system consisting of epoxy-coated reinforcement in combination with 2-1/2 in. of Class C concrete cover has been used in Indiana, research and experience have demonstrated that this system can be compromised. As an alternative solution to the corrosion problem in reinforced concrete, fiber reinforced poly...

  4. Electronic Coupling in [Mo2]-Bridge-[Mo2] Systems with Twisted Bridges.

    Science.gov (United States)

    Zhang, Hong Li; Zhu, Guang Yuan; Wang, Gangyi; Meng, Miao; Liu, Chun Y; Lei, Hao

    2015-12-01

    In order to evaluate the impact of bridge conformation on electronic coupling in donor-bridge-acceptor triad systems, two Mo2 dimers, [Mo2(DAniF)3]2[μ-1,4-{C(O)NH}2-Naph] (1, DAniF = N,N'-di(p-anisyl)formamidinate and Naph = naphthalenyl) and [Mo2(DAniF)3]2[μ-1,4-(CS2)2-2,5-Me2C6H2] (2), have been synthesized and structurally characterized. These two compounds feature a large dihedral angle (>60°) between the central aromatic ring and the plane defined by the Mo-Mo bond vectors, which is distinct from the previously reported phenylene bridged analogues [Mo2(DAniF)3]2[μ-1,4-{C(O)NH}2-ph] (I) and [Mo2(DAniF)3]2[μ-1,4-(CS2)2-C6H4] (II), respectively. Unusual optical behaviors are observed for the mixed-valence (MV) species (1(+) and 2(+)), generated by single-electron oxidation. While 2(+) exhibits a weak intervalence charge transfer (IVCT) absorption band in the near-IR region, the IVCT band is absent in the spectrum of 1(+), which is quite different from what observed for I(+) and II(+). Optical analyses, based on superexchange formalism and Hush model, indicate that, in terms of Robin-Day classification, mixed-valence species 1(+) belongs to the electronically uncoupled Class I and complex 2(+), with Hab = 220 cm(-1), is assigned to the weakly coupled Class II. Together with I(+) and II(+), the four MV complexes complete a transition from Class I to Class II-III borderline as a result of manipulating the geometric topology of the bridge. Given the structural and electronic features for the molecular systems, the impacts of electrostatic interaction (through-space) and electron resonance (through-bond) on electronic coupling are discussed. PMID:26579936

  5. Bridge Management Strategy Based on Extreme User Costs for Bridge Network Condition

    Directory of Open Access Journals (Sweden)

    Ladislaus Lwambuka

    2014-01-01

    Full Text Available This paper presents a practical approach for prioritization of bridge maintenance within a given bridge network. The maintenance prioritization is formulated as a multiobjective optimization problem where the simultaneous satisfaction of several conflicting objectives includes minimization of maintenance costs, maximization of bridge deck condition, and minimization of traffic disruption and associated user costs. The prevalence of user cost during maintenance period is twofold; the first case refers to the period of dry season where normally the traffic flow is diverted to alternative routes usually resurfaced to regain traffic access. The second prevalence refers to the absence of alternative routes which is often the case in the least developed countries; in this case the user cost referred to results from the waiting time while the traffic flow is put on hold awaiting accomplishment of the maintenance activity. This paper deals with the second scenario of traffic closure in the absence of alternative diversion routes which in essence results in extreme user cost. The paper shows that the multiobjective optimization approach remains valid for extreme cases of user costs in the absence of detour roads as often is the scenario in countries with extreme poor road infrastructure.

  6. Development of a numerical model for vehicle-bridge interaction analysis of railway bridges

    Science.gov (United States)

    Kim, Hee Ju; Cho, Eun Sang; Ham, Jun Su; Park, Ki Tae; Kim, Tae Heon

    2016-04-01

    In the field of civil engineering, analyzing dynamic response was main concern for a long time. These analysis methods can be divided into moving load analysis method and moving mass analysis method, and formulating each an equation of motion has recently been studied after dividing vehicles and bridges. In this study, the numerical method is presented, which can consider the various train types and can solve the equations of motion for a vehicle-bridge interaction analysis by non-iteration procedure through formulating the coupled equations for motion. Also, 3 dimensional accurate numerical models was developed by KTX-vehicle in order to analyze dynamic response characteristics. The equations of motion for the conventional trains are derived, and the numerical models of the conventional trains are idealized by a set of linear springs and dashpots with 18 degrees of freedom. The bridge models are simplified by the 3 dimensional space frame element which is based on the Euler-Bernoulli theory. The rail irregularities of vertical and lateral directions are generated by PSD functions of the Federal Railroad Administration (FRA).

  7. Bridge Pressure Flow Scour at Clear Water Threshold Condition

    Institute of Scientific and Technical Information of China (English)

    GUO Junke; KERENYI Kornel; PAGAN-ORTIZ Jorge E; FLORA Kevin

    2009-01-01

    Bridge pressure flow scour at clear water threshold condition is studied theoretically and experimentally. The flume experiments reveal that the measured scour profiles under a bridge are more or less 2-dimensional; all the measured scour profiles can be described by two similarity equations, where the horizontal distance is scaled by the deck width while the local scour by the maximum scour depth; the maximum scour position is located just under the bridge about 15% deck width from the downstream deck edge; the scour begins at about one deck width upstream the bridge while the deposition occurs at about 2.5 deck widths downstream the bridge; and the maximum scour depth decreases with increas-ing sediment size, but increases with deck inundation. The theoretical analysis shows that: bridge scour can be divided into three cases, i.e. downstream unsubmerged, partially submerged, and totally submerged. For downstream unsubmerged flows, the maximum bridge scour depth is an open-channel problem where the conventional methods in terms of critical velocity or bed shear stress can be applied; for partially and totally submerged flows, the equilibrium maximum scour depth can be described by a scour and an inundation similarity number, which has been confirmed by experiments with two decks and two sediment sizes. For application, a design and field evaluation procedure with examples is presented, including the maximum scour depth and scour profile.

  8. Seismic response of skewed RC box-girder bridges

    Institute of Scientific and Technical Information of China (English)

    Ahmed Abdel-Mohti; Gokhan Pekcan

    2008-01-01

    It is critical to ensure the functionality of highway bridges after earthquakes to provide access to important facilities.Since the 1971 San Fernando earthquake,there has been a better understanding of the seismic performance of bridges.Nonetheless,there are no detailed guidelines addressing the performance of skewed highway bridges.Several parameters affect the response of skewed highway bridges under both service and seismic loads which makes their behavior complex.Therefore,there is a need for more research to study the effect of skew angle and other related factors on the performance of highway bridges.This paper examines the seismic performance of a three-span continuous concrete box girder bridge with skew angles from 0 to 60 degrees,analytically.Finite element (FE) and simplified beam-stick (BS) models of the bridge were developed using SAP2000.Different types of analysis were considered on both models such as:nonlinear static pushover,and linear and nonlinear time history analyses.A comparison was conducted between FE and BS,different skew angles,abutment support conditions,and time history and pushover analysis.It is shown that the BS model has the capability to capture the coupling due to skew and the significant modes for moderate skew angles.Boundary conditions and pushover load profile are determined to have a major effect on pushover analysis.Pushover analysis may be used to predict the maximum deformation and hinge formation adequately.

  9. Analysis of resonance mechanism and conditions of train bridge system

    Science.gov (United States)

    Xia, H.; Zhang, N.; Guo, W. W.

    2006-11-01

    In this paper, the resonance mechanism and conditions of train-bridge system are investigated through theoretical derivations, numerical simulations and experimental data analyses. The resonant responses of the bridge induced by moving trains are classified into three types according to different resonance mechanisms: the first is related to the periodical actions of moving load series of the vertical weights, lateral centrifugal and wind forces of vehicles; the second is induced by the loading rate of moving load series of vehicles; the third is owing to the periodically loading of the swing forces of the train vehicles excited by track irregularities and wheel hunting movements. The vehicle resonance is induced by the periodical action of regular arrangement of bridge spans and their deflections. The resonant conditions are proposed and the corresponding resonant train speeds are determined. The application scopes of resonance conditions are discussed. The resonance of the train-bridge system is affected by the span, total length, lateral and vertical stiffness of the bridge, the compositions of the train, and the axle arrangements and natural frequencies of the vehicles. The resonant train speeds for some bridges are estimated and are compared with the critical train speeds obtained from the dynamic simulation of train-bridge interaction model or from the field measurements.

  10. State-of-the-art of long-span bridge engineering in China

    Institute of Scientific and Technical Information of China (English)

    XIANG Haifan; GE Yaojun

    2007-01-01

    This paper introduces the state-of-the-art of long-span bridge engineering in China with emphases on recent long-span bridge projects,bridge deck configuration and material,design codes of long-span bridges and improvement of aerodynamic performance.The recent long-span bridge projects include thirty-eight completed suspension bridges,cable-stayed and arch bridges with a main span over 400 m,and eighteen major bridges are under construction.The bridge deck configuration and material,with prestressed concrete decks,steel-concrete composite decks and steel box decks together with several popular cross-sections,are presented.The third part briefly outlines four design codes,including static and dynamic design for highway long-span bridges,and the recent engineering experiences gained from several aerodynamic vibration control projects of long-span bridges are shared in the last part.

  11. A simplified fragility analysis of fan type cable stayed bridges

    Institute of Scientific and Technical Information of China (English)

    R. A. Khan; T. K. Datta; S. Ahmad

    2005-01-01

    A simplified fragility analysis of fan type cable stayed bridges using Probabilistic Risk Analysis (PRA)procedure is presented for determining their failure probability under random ground motion. Seismic input to the bridge support is considered to be a risk consistent response spectrum which is obtained from a separate analysis. For the response analysis, the bridge deck is modeled as a beam supported on springs at different points. The stiffnesses of the springs are determined by a separate 2D static analysis of cable-tower-deck system. The analysis provides a coupled stiffness matrix for the spring system. A continuum method of analysis using dynamic stiffness is used to determine the dynamic properties of the bridges .The response of the bridge deck is obtained by the response spectrum method of analysis as applied to multidegree of freedom system which duly takes into account the quasi - static component of bridge deck vibration. The fragility analysis includes uncertainties arising due to the variation in ground motion, material property, modeling, method of analysis,ductility factor and damage concentration effect. Probability of failure of the bridge deck is determined by the First Order Second Moment (FOSM) method of reliability. A three span double plane symmetrical fan type cable stayed bridge of total span 689 m, is used as an illustrative example. The fragility curves for the bridge deck failure are obtained under a number of parametric variations. Some of the important conclusions of the study indicate that (i) not only vertical component but also the horizontal component of ground motion has considerable effect on the probability of failure; (ii) ground motion with no time lag between support excitations provides a smaller probability of failure as compared to ground motion with very large time lag between support excitation; and (iii) probability of failure may considerably increase for soft soil condition.

  12. Surface salt bridges stabilize the GCN4 leucine zipper.

    OpenAIRE

    Spek, E. J.; Bui, A. H.; Lu, M.; Kallenbach, N R

    1998-01-01

    We present a study of the role of salt bridges in stabilizing a simplified tertiary structural motif, the coiled-coil. Changes in GCN4 sequence have been engineered that introduce trial patterns of single and multiple salt bridges at solvent exposed sites. At the same sites, a set of alanine mutants was generated to provide a reference for thermodynamic analysis of the salt bridges. Introduction of three alanines stabilizes the dimer by 1.1 kcal/mol relative to the wild-type. An arrangement c...

  13. Experiences with a two terminal-pair digital impedance bridge

    CERN Document Server

    Callegaro, Luca; Kampik, Marian; Kim, Dan Bee; Ortolano, Massimo; Pourdanesh, Faranak

    2014-01-01

    This paper describes the realization of a two terminal-pair digital impedance bridge and the test measurements performed with it. The bridge, with a very simple architecture, is based on a commercial two-channel digital signal synthesizer and a synchronous detector. The bridge can perform comparisons between impedances having arbitrary phase and magnitude ratio: its balance is achieved automatically in less than a minute. $R$-$C$ comparisons with calibrated standards, at kHz frequency and 100 kohm magnitude level, give ratio errors of the order of $10^{-6}$, with potential for further improvements.

  14. Definition and segmentation of BioMedBridges stakeholders

    OpenAIRE

    Brooksbank, Cath; Alfarez, Deborah

    2014-01-01

    The success of BioMedBridges will depend on outreach and inreach to diverse groups of stakeholders. This deliverable report describes the use of a survey to define the broad stakeholder groups with whom BioMedBridges needs to engage, and to collect information on how the individual ESFRI-BMS RIs currently engage with these groups. We wanted to know who these stakeholders are, how the RIs are currently engaging with them, and what aspects of BioMedBridges the respondents felt we should be cons...

  15. SiC MOSFETs based split output half bridge inverter

    DEFF Research Database (Denmark)

    Li, Helong; Munk-Nielsen, Stig; Beczkowski, Szymon;

    2014-01-01

    . This paper makes the current commutation mechanism and efficiency analysis of half bridge with split output based on SiC MOSFETs. Current commutation process analysis is illustrated together with LTspice simulation and afterwards, verified by the experimental results of a double pulse test circuit with split...... output. The double pulse test shows the devices' current during commutation process and the reduced switching losses of SiC MOSFETs compared to that of the traditional half bridge. The efficiency comparison is presented with experimental results of half bridge power inverter with split output...

  16. Experimental Investigation of Aerodynamic Instability of Iced Bridge Cable Sections

    DEFF Research Database (Denmark)

    Koss, Holger; Lund, Mia Schou Møller

    2013-01-01

    The accretion of ice on structural bridge cables changes the aerodynamic conditions of the surface and influences hence the acting wind load process. Full-scale monitoring indicates that light precipitation at moderate low temperatures between zero and -5°C may lead to large amplitude vibrations...... of bridge cables under wind action. This paper describes the experimental simulation of ice accretion on a real bridge cable sheet HDPE tube segment (diameter 160mm) and its effect on the aerodynamic load. Furthermore, aerodynamic instability will be estimated with quasi-steady theory using the determined...

  17. Future Trends in Reliability-Based Bridge Management

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Future bridge management systems will be based on simple stochastic models predicting the residual strength of structural elements. The current deterministic management systems are not effective in optimizing e.g. the life cycle cost of a bridge or a system of bridges. A number of important facto...... are so uncertain that they cannot be modelled satisfactorily by deterministic techniques. In recent years several researchers have studied stochastic modelling of e.g. deterioration, inspection, reliability, and repair but real applications are only reported in a few cases....

  18. A Voltage Mode Memristor Bridge Synaptic Circuit with Memristor Emulators

    Directory of Open Access Journals (Sweden)

    Leon Chua

    2012-03-01

    Full Text Available A memristor bridge neural circuit which is able to perform signed synaptic weighting was proposed in our previous study, where the synaptic operation was verified via software simulation of the mathematical model of the HP memristor. This study is an extension of the previous work advancing toward the circuit implementation where the architecture of the memristor bridge synapse is built with memristor emulator circuits. In addition, a simple neural network which performs both synaptic weighting and summation is built by combining memristor emulators-based synapses and differential amplifier circuits. The feasibility of the memristor bridge neural circuit is verified via SPICE simulations.

  19. Progressive collapse susceptibility of a long span suspension bridge

    DEFF Research Database (Denmark)

    Olmati, Pierluigi; Giuliani, Luisa

    2013-01-01

    should be maintained in case of an accidental hanger detachment. Local damages in bridges, which are characterized by an horizontal load transfer system, may progress along the deck or along the suspension system, as the dynamic overloading of the structural elements immediately adjacent to the failed...... ones may lead to subsequent failures. In suspension bridges, which are characterized by a relatively low continuity of the system, the damage of the deck may favor a collapse standstill, in case of an early detachment of the deck collapsing section. In the paper, a long span suspension bridge is taken...

  20. Fracture resistance on aggregate bridging crack in concrete

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiufang; XU Shilang

    2007-01-01

    Fracture toughening exhibited in quasi-brittle materials such as concrete is often mainly related to the action of aggregate bridging,which leads to the presence of a fracture process zone ahead of stress-free cracks in such materials.In this investigation,the fracture resistance induced by aggregate bridging,denoted by GI-bridging,is the primary focus.In order to quantitatively determine it,a general analytical formula is firstly developed,based on the definition of fracture energy by Hillerborg.After this,we further present the calculated procedures of determining this fracture resistance from the recorded load vs.crack opening displacement curve.Then,both numerical simulations and fracture experiments are performed on concrete three-point bending beams.Utilizing the obtained load against crack opening displacement curve,the value of GI-bridging at any crack extension as well as the change of GI-bridging with the crack extension is examined.It is found that GI-bridging will firstly increase with the development of crack and then stay constant once the initial crack tip opening displacement reaches the characteristic crack opening displacement w0.The effects of material strength and specimen depth on this fracture resistance are also investigated.The results reveal that the values of GI-bridging of different specimens at any crack propagation are strongly associated with the values of fracture energy of specimens.If the values of fracture energy between different specimens are comparable,the differences between GI-bridging are ignored.Instead,if values of fracture energy are different,the GI-bridging will be different.This shows that for specimens with different strengths,GI-bridging will change greatly whereas for specimens that are different in depth,whether GI-bridging exhibits size effect depends on whether the fracture energy of specimens considered in the calculation of GI-bridging is assumed to be a size-dependent material parameter.

  1. The Damage Analysis of Usu Bridge under Seismic Load

    Directory of Open Access Journals (Sweden)

    Jian-Hui Gao

    2014-02-01

    Full Text Available In order to obtain the dynamic response of Usu bridge the compression damage model of concrete materials and the finite element method are used in this study. The frequency and the main vibration mode of Usu bridge are calculated. The damage distribution and the location of maximum damage of concrete structures under the four kinds of seismic load are obtained. The results show that the maximum damage of bridge deck occurs in close to support position, the maximum compression damage of the main tower occurs in the upper tower root place. Therefore, in the construction and maintenance process note the influence of seismic load of in these positions.

  2. Myocardial bridges: their clinical implications and prognostic signs

    International Nuclear Information System (INIS)

    Among 980 consecutive selective coronary angiograms performed, nine patients had myocardial bridges of the left anterior descending (LAD) coronary artery. The overall prevalence of myocardial bridge was 0.92%. Among these patients, three patients had coronary artery disease, while six cases were isolated myocardial muscle bridges. With respect to functional abnormality, three had grade III milking effect, three had grade II and three had grade I milking effect. The indications for coronary angiograms were typical chest pain in seven cases and a typical chest pain in two cases. Their clinical and laboratory investigations are presented with literature review. (author)

  3. A micromechanical bridge-shaped voltage-controlled oscillator

    Institute of Scientific and Technical Information of China (English)

    HAN; Jianqiang; ZHU; Changchun; ZHAO; Hongpo; LIU; Junhua

    2004-01-01

    A novel micromechanical bridge-shaped voltage-controlled oscillator with high Q value was fabricated. The core of this kind of oscillators is an electrothermally excited and piezoresistively detected micromechanical bridge resonator. Its resonance frequency can be adjusted by changing the DC voltage applied to the Wheatstone bridge. Theoretical analysis and experimental data show that its resonance frequency is linear with the square of the DC voltage. The linearity is better than 0.16% and the adjustable frequency range excels 17.15%.

  4. Sectional model test study on vortex-excited resonance of vehicle-bridge system of Shanghai Bridge over Yangtse River

    Institute of Scientific and Technical Information of China (English)

    Li ZHOU; Yaojun GE

    2009-01-01

    It is necessary to study how vehicles influence the vortex-excited resonance of vehicle-bridge systems,because lock-in wind speed is low and vortex-excited resonance is sensitive to any change in the main girder sections. Based on the Shanghai Bridge over the Yangtse River, the vortex-excited resonance of a 1:60 scale sectional model was tested in a TJ-lwind tunnel, with or without vehicles at the attack angle of 0°, + 3 and -3°,respectively. The conversion relationships between the resonant amplitudes of the sectional model and that of the prototype bridge were also established by mode shape correction. The result indicates that: 1) for the bridge with vehicles, the vertical vortex-excited resonance is accom-panied by torsion vibration with the same frequency, and vice versa, 2) the amplitude of vortex-excited resonance of the bridge with vehicles is much larger than that of the bridge without vehicles, and 3) the lock-in wind speed of the vortex-excited resonance becomes smaller due to the disturbance of vehicles. It is obvious that vehicles bring about changes in the aerodynamic shape of the main girder.Therefore, the influence of vehicles on vortex-excited resonance performance of vehicle-bridge systems, in terms of both amplitude and mode, should not be ignored.

  5. Light Bridge in a Developing Active Region. I. Observation of Light Bridge and its Dynamic Activity Phenomena

    CERN Document Server

    Toriumi, Shin; Cheung, Mark C M

    2015-01-01

    Light bridges, the bright structures that divide the umbra of sunspots and pores into smaller pieces, are known to produce wide variety of activity events in solar active regions (ARs). It is also known that the light bridges appear in the assembling process of nascent sunspots. The ultimate goal of this series of papers is to reveal the nature of light bridges in developing ARs and the occurrence of activity events associated with the light bridge structures from both observational and numerical approaches. In this first paper, exploiting the observational data obtained by Hinode, IRIS, and Solar Dynamics Observatory (SDO), we investigate the detailed structure of the light bridge in NOAA AR 11974 and its dynamic activity phenomena. As a result, we find that the light bridge has a weak, horizontal magnetic field, which is transported from the interior by large-scale convective upflow and is surrounded by strong, vertical fields of adjacent pores. In the chromosphere above the bridge, a transient brightening ...

  6. Bridging the divide between science and journalism.

    Science.gov (United States)

    Van Eperen, Laura; Marincola, Francesco M; Strohm, Jennifer

    2010-01-01

    There are countless reasons nearly every scientist should learn how to communicate effectively with the media, including increased understanding of critical research findings to attract or sustain funding and build new professional partnerships that will further propel forward research. But where do scientists begin? Bridging the Divide between Science and Journalism offers practical tips for any scientist looking to work with the media.Given the traditional and internet-based sources for medical research and healthcare-related news now available, it is imperative that scientists know how to communicate their latest findings through the appropriate channels. The credible media channels are managed by working journalists, so learning how to package vast, technical research in a form that is appetizing and "bite-sized" in order to get their attention, is an art. Reducing years of research into a headline can be extremely difficult and certainly doesn't come naturally to every scientist, so this article provides suggestions on how to work with the media to communicate your findings. PMID:20219123

  7. Harmonic Oscillators as Bridges between Theories

    International Nuclear Information System (INIS)

    Other than scattering problems where perturbation theory is applicable, there are basically two ways to solve problems in physics. One is to reduce the problem to harmonic oscillators, and the other is to formulate the problem in terms of two-by-two matrices. If two oscillators are coupled, the problem combines both two-by-two matrices and harmonic oscillators. This method then becomes a powerful research tool to cover many different branches of physics. Indeed, the concept and methodology in one branch of physics can be translated into another through the common mathematical formalism. It is noted that the present form of quantum mechanics is largely a physics of harmonic oscillators. Special relativity is the physics of the Lorentz group which can be represented by the group of by two-by-two matrices commonly called SL(2, c). Thus the coupled harmonic oscillators can therefore play the role of combining quantum mechanics with special relativity. Both Paul A. M. Dirac and Richard P. Feynman were fond of harmonic oscillators, while they used different approaches to physical problems. Both were also keenly interested in making quantum mechanics compatible with special relativity. It is shown that the coupled harmonic oscillators can bridge these two different approaches to physics

  8. Harmonic Oscillators as Bridges between Theories

    Science.gov (United States)

    Kim, Y. S.; Noz, Marilyn E.

    2005-03-01

    Other than scattering problems where perturbation theory is applicable, there are basically two ways to solve problems in physics. One is to reduce the problem to harmonic oscillators, and the other is to formulate the problem in terms of two-by-two matrices. If two oscillators are coupled, the problem combines both two-by-two matrices and harmonic oscillators. This method then becomes a powerful research tool to cover many different branches of physics. Indeed, the concept and methodology in one branch of physics can be translated into another through the common mathematical formalism. It is noted that the present form of quantum mechanics is largely a physics of harmonic oscillators. Special relativity is the physics of the Lorentz group which can be represented by the group of by two-by-two matrices commonly called SL(2, c). Thus the coupled harmonic oscillators can therefore play the role of combining quantum mechanics with special relativity. Both Paul A. M. Dirac and Richard P. Feynman were fond of harmonic oscillators, while they used different approaches to physical problems. Both were also keenly interested in making quantum mechanics compatible with special relativity. It is shown that the coupled harmonic oscillators can bridge these two different approaches to physics.

  9. Simplified environmental study on innovative bridge structure.

    Science.gov (United States)

    Bouhaya, Lina; Le Roy, Robert; Feraille-Fresnet, Adélaïde

    2009-03-15

    The aim of this paper is to present a simplified life cycle assessment on an innovative bridge structure, made of wood and ultra high performance concrete, which combines mechanical performance with minimum environmental impact. The environmental analysis was conducted from cradle to grave using the Life Cycle Assessment method. It was restricted to energy release and greenhouse gas emissions. Assumptions are detailed for each step of the analysis. For the wood end-of-life, three scenarios were proposed: dumping, burning, and recycling. Results show that the most energy needed is in the production phase, which represents 73.4% of the total amount. Analysis shows that the renewable energy is about 70% of the production energy. Wood, through its biomass CO2, contributes positively to the environmental impact. It was concluded that no scenario can be the winner on both impacts. Indeed, the end-of-life wood recycling gives the best impact on CO2 release, whereas burning wood, despite its remarkable energy impact is the worst. According to the emphasis given to each impact, designers will be able to choose one or the other. PMID:19368215

  10. Cathodic Protection of the Yaquina Bay Bridge

    Energy Technology Data Exchange (ETDEWEB)

    Bullard, Sophie J.; Cramer, Stephen D.; Covino, Bernard S., Jr.; Holcomb, Gordon R.; Russell, James H.; Laylor, H.M.; Cryer, C.B.

    2001-02-01

    The Yaquina Bay Bridge in Newport, Oregon, was designed by Conde B. McCullough and built in 1936. The 3,223-foot (982 m) structure is a combination of concrete arch approach spans and a steel through arch over the shipping channel. Cathodic protection is used to prevent corrosion damage to the concrete arches. The Oregon Department of Transportation (Oregon DOT) installed a carbon anode coating (DAC-85) on two of the north approach spans in 1985. This anode was operated at a current density of 6.6 mA/m2(0.6 mA/ft2). No failure of the conductive anode was observed in 1990, five years after application, or in 2000, 15 years after application. Thermal-sprayed zinc anodes 20 mils (0.5 mm) thick were applied to half the south approach spans beginning in 1990. Thermal-sprayed zinc anodes 15 mils (0.4 mm) thick were applied to the remaining spans in 1996. These anodes were operated at a current density of 2.2 mA/m2(0.2 mA/ft2). In 1999, four zones on the approach spans were included in a two-year field trial of humectants to improve zinc anode performance. The humectants LiNO3 and LiBr were applied to two zones; the two adjacent zones were left untreated as controls. The humectants substantially reduced circuit resistance compared to the controls.

  11. Stargate GTM: Bridging Descriptor and Activity Spaces.

    Science.gov (United States)

    Gaspar, Héléna A; Baskin, Igor I; Marcou, Gilles; Horvath, Dragos; Varnek, Alexandre

    2015-11-23

    Predicting the activity profile of a molecule or discovering structures possessing a specific activity profile are two important goals in chemoinformatics, which could be achieved by bridging activity and molecular descriptor spaces. In this paper, we introduce the "Stargate" version of the Generative Topographic Mapping approach (S-GTM) in which two different multidimensional spaces (e.g., structural descriptor space and activity space) are linked through a common 2D latent space. In the S-GTM algorithm, the manifolds are trained simultaneously in two initial spaces using the probabilities in the 2D latent space calculated as a weighted geometric mean of probability distributions in both spaces. S-GTM has the following interesting features: (1) activities are involved during the training procedure; therefore, the method is supervised, unlike conventional GTM; (2) using molecular descriptors of a given compound as input, the model predicts a whole activity profile, and (3) using an activity profile as input, areas populated by relevant chemical structures can be detected. To assess the performance of S-GTM prediction models, a descriptor space (ISIDA descriptors) of a set of 1325 GPCR ligands was related to a B-dimensional (B = 1 or 8) activity space corresponding to pKi values for eight different targets. S-GTM outperforms conventional GTM for individual activities and performs similarly to the Lasso multitask learning algorithm, although it is still slightly less accurate than the Random Forest method.

  12. Technology transfer — bridging space and society

    Science.gov (United States)

    Students of Technology Transfer Design Project Team (ISU Summer Session 1997)

    Strategies, policies and methods by which technologies can be cross-fertilized between the space and non-space sectors were examined by students of the design project "Technology Transfer — Bridging Space and Society". This project was undertaken by students attending the 1997 10th Anniversary Summer Session Program of the International Space University. General issues relating to transfer of technology were discussed including definitions and mechanisms (push, pull, interactive and pro-active). As well as looking at case studies and the impact of national policies on space agencies, the design project also sought to look at technology transfer on a country-by-country basis, selecting various countries for scrutiny and reporting on their technology transfer status. The project report shows how transfer of technology varies between nations and when analyzed with the case studies identifies the general strategies, policies and methods in use and how they can be improved. Finally, the report seeks to recommend certain issues to governments, space agencies and industrial organizations to facilitate the transfer of technology. These include the development of a generic metrics system and the implementation of better appropriate procedures and mechanisms for a positive diffusion process between space and non-space sectors.

  13. Bridging the Divide between Science and Journalism

    Directory of Open Access Journals (Sweden)

    Marincola Francesco M

    2010-03-01

    Full Text Available Abstract There are countless reasons nearly every scientist should learn how to communicate effectively with the media, including increased understanding of critical research findings to attract or sustain funding and build new professional partnerships that will further propel forward research. But where do scientists begin? Bridging the Divide between Science and Journalism offers practical tips for any scientist looking to work with the media. Given the traditional and internet-based sources for medical research and healthcare-related news now available, it is imperative that scientists know how to communicate their latest findings through the appropriate channels. The credible media channels are managed by working journalists, so learning how to package vast, technical research in a form that is appetizing and "bite-sized" in order to get their attention, is an art. Reducing years of research into a headline can be extremely difficult and certainly doesn't come naturally to every scientist, so this article provides suggestions on how to work with the media to communicate your findings.

  14. Model bridging chimera state and explosive synchronization

    Science.gov (United States)

    Zhang, Xiyun; Bi, Hongjie; Guan, Shuguang; Liu, Jinming; Liu, Zonghua

    2016-07-01

    Global synchronization and partial synchronization are the two distinctive forms of synchronization in coupled oscillators and have been well studied in recent decades. Recent attention on synchronization is focused on the chimera state (CS) and explosive synchronization (ES), but little attention has been paid to their relationship. Here we study this topic by presenting a model to bridge these two phenomena, which consists of two groups of coupled oscillators, and its coupling strength is adaptively controlled by a local order parameter. We find that this model displays either CS or ES in two limits. In between the two limits, this model exhibits both CS and ES, where CS can be observed for a fixed coupling strength and ES appears when the coupling is increased adiabatically. Moreover, we show both theoretically and numerically that there are a variety of CS basin patterns for the case of identical oscillators, depending on the distributions of both the initial order parameters and the initial average phases. This model suggests a way to easily observe CS, in contrast to other models having some (weak or strong) dependence on initial conditions.

  15. A p-quinodimethane-bridged porphyrin dimer.

    Science.gov (United States)

    Zeng, Wangdong; Ishida, Masatoshi; Lee, Sangsu; Sung, Young Mo; Zeng, Zebing; Ni, Yong; Chi, Chunyan; Kim, Dongho; Wu, Jishan

    2013-12-01

    A p-quinodimethane (p-QDM)-bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross-conjugated keto-linked porphyrin dimers 8a and 8b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel-Crafts alkylation of the diol-linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one-photon absorption (OPA, λ(max)=955 nm, ε=45400 M(-1) cm(-1)) and a large two-photon absorption (TPA) cross-section (σ((2))(max)=2080 GM at 1800 nm) in the near-infrared (NIR) region due to its extended π-conjugation and quinoidal character. It also exhibits a short singlet excited-state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground-state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto-linked dimer 8b. This research has revealed that incorporation of a p-QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.

  16. Dynamic characteristics analysis of mats of ballasted track on bridge

    Directory of Open Access Journals (Sweden)

    Wu Kaiwei

    2012-11-01

    Full Text Available A complete vehicle-ballasted track-bridge coupling dynamic model is established. A program to analyze dynamic characteristics is also invented, which is the first time to systematically analyze the dynamic characteristics of vehicles, tracks and bridges when using mats under ballast on the rigid foundation of bridge, in China. The results show that:(1 The mats under ballast are able to reduce vibration of the train and the wheel-rail forces by a certain extent, which increase the comforts of passengers.(2 The mats under ballast are able to reduce the stress of ballast, which has a great practical significance on avoiding ballast powdering and reducing maintenance work of ballast. (3 The mats under ballast are able to reduce the vibration of bridges. It has a great significance on avoiding the lateral flow deformation of ballast under dynamic loads, keeping good track geometry to ensure the safety of operation.

  17. THE BRIDGE STRUCTURE TESTS UNDER SLOW MOVING LOAD

    Directory of Open Access Journals (Sweden)

    B. D. Sukhorukov

    2010-03-01

    Full Text Available Peculiarities and advantages of bridge structure tests under slow moving load are pointed out. The calculation algorithms for finding in-situ influence line ordinates based on the results of the tests are proposed.

  18. Bridging the Gap between Instructional Design and Double Loop Learning

    NARCIS (Netherlands)

    Spoelstra, Howard; Rusman, Ellen; Van Bruggen, Jan; Koper, Rob; Matera, Maristella

    2008-01-01

    Spoelstra, H., Rusman, E., Van Bruggen, J., Koper, R., & Matera, M. (2008). Bridging the Gap Between Instructional Design and Double-Loop Learning. International Journal of Web-Based Learning and Teaching Technologies, 3(1), 79-89.

  19. Abnormal oscillation modes in a waning light bridge

    CERN Document Server

    Yuan, Ding

    2016-01-01

    A sunspot acts as a waveguide in response to the dynamics of the solar interior; the trapped waves and oscillations could reveal its thermal and magnetic structures. We study the oscillations in a sunspot intruded by a light bridge, the details of the oscillations could reveal the fine structure of the magnetic topology. We use the Solar Dynamics Observatory/Atmospheric Imaging Assembly data to analyse the oscillations in the emission intensity of light bridge plasma at different temperatures and investigate their spatial distributions. The extreme ultraviolet emission intensity exhibits two persistent oscillations at five-minute and sub-minute ranges. The spatial distribution of the five-minute oscillation follows the spine of the bridge; whereas the sub-minute oscillations overlap with two flanks of the bridge. Moreover, the sub-minute oscillations are highly correlated in spatial domain, however, the oscillations at the eastern and western flanks are asymmetric with regard to the lag time. In the meanwhile...

  20. Re(I) bridged porphyrin dyads, triads and tetrads

    Indian Academy of Sciences (India)

    M Yedukondalu; M Ravikanth

    2011-03-01

    Porphyrin rings containing two meso-pyridyl groups either in cis or trans fashion can be used to construct Re(I) bridged multiporphyrin assemblies. The cis-dipyridyl porphyrins with various porphyrin cores such as N4, N3O, N3S, N2S2 have been used to react with Re(CO)5Cl in THF at refluxing temperature and constructed planar Re(I) bridged porphyrin dyads containing either one type of porphyrin subunit or two types of porphyrin subunits. The trans-dipyridyl porphyrins have been used to construct Re(I) bridged porphyrin squares. The porphyrin dyads have been explored for singlet-singlet energy transfer studies and porphyrin squares have been used for catalysis, chemical sensing, molecular sieving and photocurrent production studies. An overview of synthesis of Re(I) bridged porphyrin dyads, triads and tetrads and their interesting photophysical properties are highlighted in this paper.

  1. Segmental Bridges under Combined Torsion, Bending and Shear

    Institute of Scientific and Technical Information of China (English)

    黄真; 刘西拉

    2003-01-01

    Segmental bridges with unbonded prestressed tendons have some advantages, such as the weather independence and the corrosion protection of prestressing tendons. This paper analyzed the behavior of a prestressed segmental bridge with unbonded tendons under combined loading of torsion, bending and shear. According to the experiment research, a modified skew bending model was developed to calculate the bearing capacity of segmental bridges subjected to combined bending, shear and torsion. The finite element method was used to investigate the deflection behaviors of such structure, also to check the theoretical model. The theoretical and FEM research resuits were compared favorably with the test results from Technical University of Braunschweig, Germany. Finally, suggestion for the design and construction of segmental bridges with external prestressing was made.

  2. Effects of ice accretion on the aerodynamics of bridge cables

    DEFF Research Database (Denmark)

    Demartino, C.; Koss, Holger; Georgakis, Christos T.;

    2015-01-01

    Undesirable wind induced vibrations of bridge cables can occur when atmospheric conditions are such to generate ice accretion. This paper contains the results of an extensive investigation of the effects of ice accretion due to in-cloud icing, on the aerodynamic characteristics of bridge hangers...... of temperature, wind speed and yaw angle of accretion, were reproduced in a climatic wind tunnel, giving rise to different types of accretion. These were chosen such to generate the most common natural ice formations expected to produce bridge cable vibrations. A description of the geometric characteristics...... and stay cables. The aim of this paper is twofold; first, it was investigated the ice accretion process and the final shape of the ice accreted; then the aerodynamics of the ice accreted bridge cables was characterized, and related to the ice shape. Different climatic conditions, i.e. combinations...

  3. Bridge SHM system based on fiber optical sensing technology

    Science.gov (United States)

    Li, Sheng; Fan, Dian; Fu, Jiang-hua; Huang, Xing; Jiang, De-sheng

    2015-09-01

    The latest progress of our lab in recent 10 years on the area of bridge structural health monitoring (SHM) based on optical fiber sensing technology is introduced. Firstly, in the part of sensing technology, optical fiber force test-ring, optical fiber vibration sensor, optical fiber smart cable, optical fiber prestressing loss monitoring method and optical fiber continuous curve mode inspection system are developed, which not only rich the sensor types, but also provides new monitoring means that are needed for the bridge health monitoring system. Secondly, in the optical fiber sensing network and computer system platform, the monitoring system architecture model is designed to effectively meet the integration scale and effect requirement of engineering application, especially the bridge expert system proposed integration of sensing information and informatization manual inspection to realize the mode of multi index intelligence and practical monitoring, diagnosis and evaluation. Finally, the Jingyue bridge monitoring system as the representative, the research on the technology of engineering applications are given.

  4. Dynamics and stability of a vertical water bridge

    CERN Document Server

    Namin, Reza Montazeri

    2013-01-01

    A vertical connection of water is formed when a high voltage electrode is dipped in and pulled out of a container of deionized water. We considered the formation, stability and dynamical characteristics of this vertical water bridge. For the first time in this field, we observed instabilities in the bridge that led to an oscillatory behaviour which is categorized in three dynamical regimes and supplied explanations on the physics behind these varied motions. We report the formation of macroscopic droplets during this motion, which their dynamics revealed that they are electrically charged. In some cases the droplets would be levitating when the electric force opposes the gravity. Also the steady bridge is thoroughly studied regarding its geometry and a set of quantitative data is presented using dimensionless numbers, which brings the possibility of direct quantitative comparison between theory and experiments. Our results shed light on the physics behind this phenomenon and the horizontal water bridge, which...

  5. PS buildings : reinforced concrete structure for shielding "bridge" pillar

    CERN Multimedia

    CERN PhotoLab

    1956-01-01

    The PS ring traverses the region between the experimental halls South and North (buildings Nos 150 and 151) under massive bridge-shaped concrete beams. This pillar stands at the S-W end of the structure.

  6. Road bridges of the ZAR: An annotated photo-essay

    NARCIS (Netherlands)

    Fisher, R.C.; Clarke, N.J.

    2014-01-01

    The Zuid-Afrikaansche Republiek (ZAR) undertook an extensive road and bridge building programme which commenced during the latter half of the 1880s and ended with the effective demise of that independence in 1900.

  7. Mathematical models for suspension bridges nonlinear structural instability

    CERN Document Server

    Gazzola, Filippo

    2015-01-01

    This work provides a detailed and up-to-the-minute survey of the various stability problems that can affect suspension bridges. In order to deduce some experimental data and rules on the behavior of suspension bridges, a number of historical events are first described, in the course of which several questions concerning their stability naturally arise. The book then surveys conventional mathematical models for suspension bridges and suggests new nonlinear alternatives, which can potentially supply answers to some stability questions. New explanations are also provided, based on the nonlinear structural behavior of bridges. All the models and responses presented in the book employ the theory of differential equations and dynamical systems in the broader sense, demonstrating that methods from nonlinear analysis can allow us to determine the thresholds of instability.

  8. Optimal, Generic Planning of Maintenance and Inspection of Steel Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Faber, M.H.

    2002-01-01

    Fatigue damage is an important deterioration mechanism for steel bridges. This paper describes a simplified and generic approach for reliability and risk based inspection planning of fatigue sensitive structural details. Fatigue sensitive details are categorized according to their loading charact...

  9. Noise Reduction of Fractional Source in Cryogenic Current Comparator Bridge

    Directory of Open Access Journals (Sweden)

    C. Jassadajin

    2013-10-01

    Full Text Available In this work, a resistance measurement is done at both high accuracy and precision using Cryogenic Current Comparator (CCC bridge system [1]. A CCC bridge circuit consists of three parts: coil, current source and detector parts. There are electronic components in the current source of the system. They generate thermal noise in the measurement system. This paper shows the noise reduction in a fractional source of CCC Bridge which is a ramp generator. The bridge receives the voltage signal, which is supplied to a CCC coil to achieve the magnetic flux balance condition inside the superconductorshield, from a null detector. By analysing the noise of the circuit in the fractional part and improving the circuit, it can minimize the noise to obtain a better output of the fractional source for improved accurate and more stability. Finally, the noise can be reduced for a designed bandwidth, a unity noise gain and minimized input resistance in the circuit.

  10. Seismic Performance of Multi-Span RC Railway Bridges

    DEFF Research Database (Denmark)

    Georgakis, Christos; Barrau, Xavier

    2008-01-01

    and fragility curves in relation to PGA. The cost comparisons clearly show that particular bridge types perform better than others economically for specific ground types and expected seismic intensities, even though in some cases they may be expected to suffer larger damages during their lifetime....... with Lead Rubber Bearing (LRB) supports and the laterally fixed continuous deck (CRB) with LRBs. In this paper, the seismic performance of these four types is examined for varying ground types and seismic intensities. For the purposes of comparison, all of the bridges have five spans with identical span...... to increase the performance and reduce the overall bridge cost. Finally, an evaluation of the lifetime bridge costs are made assuming current prices, including costs relating to the damage associated with the expected seismic events. This is accomplished through the use of approximated damage states...

  11. The Tacoma Narrows Bridge Collapse on Film and Video

    Science.gov (United States)

    Olson, Don; Hook, Joseph; Doescher, Russell; Wolf, Steven

    2015-11-01

    This month marks the 75th anniversary of the Tacoma Narrows Bridge collapse. During a gale on Nov. 7, 1940, the bridge exhibited remarkable oscillations before collapsing spectacularly (Figs. 1-5). Physicists over the years have spent a great deal of time and energy studying this event. By using open-source analysis tools and digitized footage of the disaster, physics students in both high school and college can continue in this tradition. Students can watch footage of "Galloping Gertie," ask scientific questions about the bridge's collapse, analyze data, and draw conclusions from that analysis. Students should be encouraged to pursue their own investigations, but the question that drove our inquiry was this: "When physics classes watch modern video showing the oscillations and the free fall of the bridge fragments, are these scenes sped up, slowed down, or at the correct speed compared to what was observed by the eyewitnesses on Nov. 7, 1940?"

  12. Discrete vortex method simulations of aerodynamic admittance in bridge aerodynamics

    DEFF Research Database (Denmark)

    Rasmussen, Johannes Tophøj; Hejlesen, Mads Mølholm; Larsen, Allan;

    The meshless and remeshed Discrete Vortex Method (DVM) has been widely used in academia and by the industry to model two-dimensional flow around bluff bodies. The implementation “DVMFLOW” [1] is used by the bridge design company COWI to determine and visualise the flow field around bridge sections......, and to determine aerodynamic forces and the corresponding flutter limit. A simulation of the three-dimensional bridge responseto turbulent wind is carried out by quasi steady theory by modelling the bridge girder as a line like structure [2], applying the aerodynamic load coefficients found from the current version...... of DVMFLOW in a strip wise fashion. Neglecting the aerodynamic admittance, i.e. the correlation of the instantaneous lift force to the turbulent fluctuations in the vertical velocities, leads to higher response to high frequency atmospheric turbulence than would be obtained from wind tunnel tests....

  13. Discrete vortex method simulations of aerodynamic admittance in bridge aerodynamics

    DEFF Research Database (Denmark)

    Rasmussen, Johannes Tophøj; Hejlesen, Mads Mølholm; Larsen, Allan;

    velocity spectra are found in good agreement with the target spectra. The aerodynamic admittance of the structure is measured by sampling vertical velocities immediately upstream of the structure and the lift forces on the structure. The method is validated against the analytic solution for the admittance......The meshless and remeshed Discrete Vortex Method (DVM) has been widely used in academia and by the industry to model two-dimensional flow around bluff bodies. The implementation “DVMFLOW” [1] is used by the bridge design company COWI to determine and visualise the flow field around bridge sections......, and to determine aerodynamic forces and the corresponding flutter limit. A simulation of the three-dimensional bridge responseto turbulent wind is carried out by quasi steady theory by modelling the bridge girder as a line like structure [2], applying the aerodynamic load coefficients found from the current version...

  14. Hysteretic behavior of prestressed concrete bridge pier with fiber model.

    Science.gov (United States)

    Wang, Hui-li; Feng, Guang-qi; Qin, Si-feng

    2014-01-01

    The hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier were researched. The effects of the prestressed tendon ratio, the longitudinal reinforcement ratio, and the stirrup reinforcement ratio on the hysteretic behavior and seismic characteristics of the prestressed concrete bridge pier have been obtained with the fiber model analysis method. The analysis show some results about the prestressed concrete bridge pier. Firstly, greater prestressed tendon ratio and more longitudinal reinforcement can lead to more obvious pier's hysteresis loop "pinching effect," smaller residual displacement, and lower energy dissipation capacity. Secondly, the greater the stirrup reinforcement ratio is, the greater the hysteresis loop area is. That also means that bridge piers will have better ductility and stronger shear capacity. The results of the research will provide a theoretical basis for the hysteretic behavior analysis of the prestressed concrete pier. PMID:24578635

  15. Bridging Cultures. Transnational Cultural Encounters in the Reception of The Bridge

    DEFF Research Database (Denmark)

    Bondebjerg, Ib

    2017-01-01

    the Nordic noir phenomenon. This article deals with reception of the series in three countries (Denmark, UK and Sweden), through analysis of the demographic profile of audiences and the discourses of reception of the series in selected newspapers and on social media. Such transnational intercultural......The Danish-Swedish crime series The Bridge (2011-) is not just a European co-production involving several national funding sources. It has also created quite an active response among transnational audiences, critics, journalists and creative industry people – further expanding and consolidating...

  16. Accelarated urban landscape: from the Imperator bridge to the Constructor bridge

    OpenAIRE

    Nogueira, Adriana Dantas; Silva, Eder Donizeti da; Giacomet, Maria Clara

    2010-01-01

    This paper approaches the transformation of the urban landscape of Aracaju, a Brazilian Northeast city, located in the coast line, which has, in only 155 years, changed from the condition of village to a city-metropolis. The main case study involves the occurred transformations in a bordering landscape which can be seen from the main river of the city, in where two bridges are located. One of them has been inaugurated at the end of the 19 century and the other one at the beginning of the 2...

  17. Evaluation of an existing bridge`s modal properties using simplified finite element analysis

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, C.R.; Duffey, T.A.

    1996-02-01

    The purpose of this paper is to present results of a simplified approach to the dynamic finite element modeling of composite girder-slab bridges using a single beam element to represent the girder-slab cross section. Dynamic properties calculated with these simplified models are compared to experimental results and results obtained from more detailed shell element models. The method for modeling flexural behavior is first discussed followed by a discussion of modeling torsional behavior. The beam element models accurately calculated the mode shapes of the structure, but the associated resonant frequencies showed some error.

  18. The Roman Bridge: a "double pulley – suture bridges" technique for rotator cuff repair

    Directory of Open Access Journals (Sweden)

    Maffulli Nicola

    2007-12-01

    Full Text Available Abstract Background With advances in arthroscopic surgery, many techniques have been developed to increase the tendon-bone contact area, reconstituting a more anatomic configuration of the rotator cuff footprint and providing a better environment for tendon healing. Methods We present an arthroscopic rotator cuff repair technique which uses suture bridges to optimize rotator cuff tendon-footprint contact area and mean pressure. Results Two medial row 5.5-mm Bio-Corkscrew suture anchors (Arthrex, Naples, FL, which are double-loaded with No. 2 FiberWire sutures (Arthrex, Naples, FL, are placed in the medial aspect of the footprint. Two suture limbs from a single suture are both passed through a single point in the rotator cuff. This is performed for both anchors. The medial row sutures are tied using the double pulley technique. A suture limb is retrieved from each of the medial anchors through the lateral portal, and manually tied as a six-throw surgeon's knot over a metal rod. The two free suture limbs are pulled to transport the knot over the top of the tendon bridge. Then the two free suture limbs that were used to pull the knot down are tied. The end of the sutures are cut. The same double pulley technique is repeated for the other two suture limbs from the two medial anchors, but the two free suture limbs are used to produce suture bridges over the tendon, by means of a Pushlock (Arthrex, Naples, FL, placed 1 cm distal to the lateral edge of the footprint. Conclusion This technique maximizes the advantages of two techniques. On the one hand, the double pulley technique provides an extremely secure fixation in the medial aspect of the footprint. On the other hand, the suture bridges allow to improve pressurized contact area and mean footprint pressure. In this way, the bony footprint in not compromised by the distal-lateral fixation, and it is thus possible to share the load between fixation points. This maximizes the strength of the repair

  19. 23 CFR 650.407 - Application for bridge replacement or rehabilitation.

    Science.gov (United States)

    2010-04-01

    ... Rehabilitation Program § 650.407 Application for bridge replacement or rehabilitation. (a) Agencies participate in the bridge program by conducting bridge inspections and submitting Structure Inventory and... 23 Highways 1 2010-04-01 2010-04-01 false Application for bridge replacement or...

  20. Seismic vulnerability of historical arch type bridge structures in Italy

    OpenAIRE

    Qadir Bhatti, Abdul

    2009-01-01

    Italy is located on a earthquake prone area and old bridges were desinged without any seismic provision. In the years (2009), tremors were felt in Italy due to the strong earthquakes at Abruzzo, which highlight the earthquake threat to Italy. This study focuses on seismic vulnerability of arch type masonry bridge structures in Italy, designed primarily for gravity loads, when they are subjected to earthquakes. A case study has been carried out for the vulnerability study for a ...

  1. Possibilites for Structural Improvements in the Design of Concrete Bridges

    OpenAIRE

    Spasojevic, Ana

    2006-01-01

    This paper presents the concept and the current state of a research investigating possibilities for further evolutions in medium span concrete road bridges. The main parameters of the study are the structural shape, the type of materials used and their disposition. The study will provide an optimisation of the design of various systems of concrete bridges, with the perspective of introducing new advanced cementitious materials, such as ultra high performance fibre reinforced concrete, UHPFC. ...

  2. Practice of One Health approaches: Bridges and barriers in Tanzania

    OpenAIRE

    Kim A. Kayunze; Angwara Kiwara; Eligius Lyamuya; Dominic M. Kambarage; Jonathan Rushton; Richard Coker; Richard Kock

    2014-01-01

    The practice of one health approaches in human and animal health programmes is influenced by type and scope of bridges and barriers for partnerships. It was thus essential to evaluate the nature and scope of collaborative arrangements among human, animal, and wildlife health experts in dealing with health challenges which demand inter-sectoral partnership. The nature of collaborative arrangement was assessed, and the respective bridges and barriers over a period of 12 months (July 20011 to Ju...

  3. Do salt bridges stabilize proteins? A continuum electrostatic analysis.

    OpenAIRE

    Hendsch, Z. S.; Tidor, B.

    1994-01-01

    The electrostatic contribution to the free energy of folding was calculated for 21 salt bridges in 9 protein X-ray crystal structures using a continuum electrostatic approach with the DELPHI computer-program package. The majority (17) were found to be electrostatically destabilizing; the average free energy change, which is analogous to mutation of salt bridging side chains to hydrophobic isosteres, was calculated to be 3.5 kcal/mol. This is fundamentally different from stability measurements...

  4. Finding Strong Bridges and Strong Articulation Points in Linear Time

    Science.gov (United States)

    Italiano, Giuseppe F.; Laura, Luigi; Santaroni, Federico

    Given a directed graph G, an edge is a strong bridge if its removal increases the number of strongly connected components of G. Similarly, we say that a vertex is a strong articulation point if its removal increases the number of strongly connected components of G. In this paper, we present linear-time algorithms for computing all the strong bridges and all the strong articulation points of directed graphs, solving an open problem posed in [2].

  5. Bridging book : a not-so-electronic children's picturebook

    OpenAIRE

    Figueiredo, Ana Carina; Pinto, Ana Lúcia; Branco, Pedro; Zagalo, Nelson; Coquet, Eduarda

    2013-01-01

    We present and technically describe the implementation of a book prototype: the Bridging Book, a children's mixed-media picturebook that blurs the line between printed and electronic books. Bridging book consists of a printed book and a digital device, placed side-by-side, with synchronized content. Thumbing through the book's pages triggers the device to display the complementary digital content. The physical book requires no batteries or wires. In the current version...

  6. Dynamic Soil-Structure Interaction in Bridge Abutments

    OpenAIRE

    Martínez Cutillas, Antonio; Mateo Bermejo, J.; Alarcón Álvarez, Enrique

    1996-01-01

    Strong motion obtained in instrumental short-span bridges show the importance of the abutments in the dynamic response of the whole structure. Many models have been used in order to take into account the influence of pier foundations although no reliable ones have been used to analyse the abutment performance. In this work three-dimensional Boundary Element models in frequency domain have been proposed and dimensionless dynamic stiffness of standard bridge abutments have been obtained.

  7. A FIBER-BRIDGING MODEL WITH STRESS GRADIENT EFFECTS

    Institute of Scientific and Technical Information of China (English)

    孙毅; 李涛

    2000-01-01

    Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China)ABSTRACT: A fiber-bridging model with stress gradient effects is proposed for unidirectional fiber-reinforced composites. The stress gradient terms are introduced by solving a micromechanical model under a non-uniform stress loading. It is shown that the stress gradient effect is significant on both the fiber-bridging stress distribution and the value of the critical load of fiber failure.

  8. Building Organic Bridges: Volume 3, Indonesia - Sri Lanka

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  9. Building Organic Bridges: Volume 4, Sweden - Viet Nam

    OpenAIRE

    Rahmann, Gerold; Aksoy, Uygun

    2014-01-01

    [Foreword ...] The 18th IFOAM Organic World Congress held on 13-15 October, 2014 in Istanbul-Turkey targets to 'build organic bridges'. The Scientific track will contribute to bridging not only scientists but also institutions and disciplines, and to linking more developed and less developed, rural and urban, research to extension, plant to animal, farm practices to world-wide problems and producer and consumers. Organic is a management system that requires a diversity of inputs from differen...

  10. Collapse of the soap-film bridge - Quasistatic description

    Science.gov (United States)

    Cryer, Steven A.; Steen, Paul H.

    1992-01-01

    Observations of the collapse of a soap-film bridge from a connected to a disconnected state are recorded. The equilibrium framework for this nonequilibrium event is classical. Experiments confirm predictions of stable and unstable equilibria. A quasistatic description is introduced for the dynamic states to extend the static theory. It is found to adequately describe the collapse trajectory while the bridge is still connected.

  11. A Voltage Mode Memristor Bridge Synaptic Circuit with Memristor Emulators

    OpenAIRE

    Leon Chua; Maheshwar Pd. Sah; Hyongsuk Kim; Changju Yang

    2012-01-01

    A memristor bridge neural circuit which is able to perform signed synaptic weighting was proposed in our previous study, where the synaptic operation was verified via software simulation of the mathematical model of the HP memristor. This study is an extension of the previous work advancing toward the circuit implementation where the architecture of the memristor bridge synapse is built with memristor emulator circuits. In addition, a simple neural network which performs both synaptic weighti...

  12. Rotational Angle Measurement of Bridge Support Using Image Processing Techniques

    OpenAIRE

    Young-Soo Park; John Arbie Agbayani; Jong-Han Lee; Jong-Jae Lee

    2016-01-01

    Measuring a very small rotational angle accurately and dynamically is indeed a challenging issue, especially in the case of bridge support. Also, existing inclinometers do not have sufficient resolution and accuracy to measure a bridge’s rotational angle. In this study, a new measurement system was developed to provide a practical means for measuring dynamic rotational angle of a bridge support. It features high resolution and accuracy compared with the available systems on the market. By the...

  13. Analysis of Jugular Foramen Exposure in the Fallopian Bridge Technique

    OpenAIRE

    Satar, Bulent; Yazar, Fatih; Aykut CEYHAN; Arslan, Hasan Huseyin; Aydin, Sedat

    2009-01-01

    Objective: To analyze the exposure of the jugular foramen afforded by the fallopian bridge technique. Method: The jugular foramen exposure was obtained using the jugular foramen approach combined with the fallopian bridge technique. We applied this technique using 10 temporal bone specimens at a tertiary referral center. The exposure was assessed by means of depth of the dissection field and two separate dissection spaces that were created anteriorly and posteriorly to the facial nerve. Anter...

  14. A Unique Prestressed Concrete Pedestrian Bridge in Spain

    OpenAIRE

    Ivorra Chorro, Salvador; Alvado Bañón, Joaquín; Crespo Zaragoza, Miguel Ángel

    2014-01-01

    This paper describes the so-called Kiss Bridge. This structure resembles a kiss, a subtle touch of structures. The beams have been structurally designed to adapt the Japanese art of paper folding called "origami." The material used for constructing the floating beams is white reinforced concrete in the form of folded shells. The two geometrically different parts have distinct structural behaviors. The length of the main pathway of both structures is over 60 m. The pedestrian bridge crosses an...

  15. Construction of precast high performance concrete segmental bridges.

    OpenAIRE

    Ruiz Ripoll, Lidia

    2014-01-01

    The construction of both medium and long span precast concrete segmental bridges is widely spread throughout Spain. Usually, the segments have multiple-keyed epoxy joints, and are assembled by internal prestressing. Yet, there is a more recent type of bridge with dry joints and external prestressing. In these last ones, shear is transferred through physical support between keys and friction between faces of the compressed joint. This shear force is evaluated using friction coefficients from t...

  16. Fabrication and Visualization of Capillary Bridges in Slit Pore Geometry

    OpenAIRE

    Broesch, David J.; Frechette, Joelle

    2014-01-01

    A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and functionalized to render their top surfaces hydrophilic. The combination of a physical feature (the pillar) with a chemical boundary (the hydrophilic film on the top of the pillar) provides both a physical and chemical heterogeneity that pins the triple contact line, a necessary feature to create stable long but narrow capillary bridges. The subst...

  17. Assessment of Infrared Thermography for NDE of FRP Bridge Decks

    OpenAIRE

    Miceli, Marybeth

    2000-01-01

    Statistics released in the fall 1989 showed that 238,357 (41%) of the nation's 577,710 bridges are either structurally deficient or functionally obsolete. New materials, such as fiber reinforced polymeric composites (FRP), are being suggested for use in bridge systems to solve some of the current problems. These materials are thought to be less affected by corrosive environmental conditions than conventional civil engineering materials. Therefore they may require less maintenance and provi...

  18. Implementing a simple vectorial bridge with a digital oscilloscope

    OpenAIRE

    Bartiromo, Rosario; De Vincenzi, Mario

    2013-01-01

    We show how to exploit instrumentation available in undergraduate student laboratories to build a simple vectorial bridge. In particular we take advantage from the possibility to read data from a digital oscilloscope with a personal computer and describe an algorithm to obtain an accurate evaluation of the phase difference between two sinusoidal signals. The use of the bridge to characterize components of a high Q RLC filter is shown to greatly improve the understanding of results in resonanc...

  19. Viscosity Effects on the Dynamics of Long Axisymmetric Liquid Bridges

    OpenAIRE

    Meseguer Ruiz, José; Perales Perales, José Manuel

    1992-01-01

    In this paper the dynamics of axisymmetric liquid columns held by capillary forces between two circular, concentric, solid disks is considered. The problem has been solved by using an one-dimensional model known in the literature as the Cosserat model, which includes viscosity effects, where the axial velocity is considered constant in each section of the liquid bridge. The dynamic response of the bridge to an excitation consisting of a small amplitude vibration of the supporting disks has be...

  20. Numerical Analysis of the Dynamic Response of Existing Railway Bridges.

    OpenAIRE

    Frøseth, Gunnstein Thomas

    2014-01-01

    The railway is an important part of the infrastructure in todays society and there is a need to increase the capacity and verify the existing railway network to face the challenges of tomorrow. To meet todays and the future demand set upon the railway network, there is a need to strengthen and assess the condition of existing railway bridges. This thesis focuses on numerical analysis of the dynamic response of railway bridges. First, viscous damping models are considered since they represent ...

  1. The calculation of noise from railway bridges and viaducts

    OpenAIRE

    Bewes, Oliver Guy

    2005-01-01

    Pandrol Rail Fastenings Limited are a designer and manufacturer of railway rail-fastening systems. As an organisation they have the capability to reduce the noise impact of bridges using resilient track components. They also have a commercial interest in providing such technology. Knowledge of the processes behind bridge noise is important to Pandrol in two ways; to aid the engineers within the organisation in the design of fastening systems and to demonstrate a state-of-the-ar...

  2. Theory of Vibrationally Inelastic Electron Transport through Molecular Bridges

    OpenAIRE

    Cizek, Martin; Thoss, Michael; Domcke, Wolfgang

    2003-01-01

    Vibrationally inelastic electron transport through a molecular bridge that is connected to two leads is investigated. The study is based on a generic model of vibrational excitation in resonant transmission of electrons through a molecular junction. Employing methods from electron-molecule scattering theory, the transmittance through the molecular bridge can be evaluated numerically exactly. The current through the junction is obtained approximately using a Landauer-type formula. Considering ...

  3. Estimation on the switching losses at IGBT bridges power converter

    OpenAIRE

    Stefanov, Goce; Karacinov, Ljupco; Cundev, Dobri

    2011-01-01

    ABSTRACT. In the paper estimation on the switching losses at IGBT bridge converter with the output serial resonant load is given. The converter works on frequency higher than resonant frequency and supports the work of IGBT transistors in the bridge with zero voltage turn on. In the analysis of the converter, PowerSim and SemiSiel simulation programs is used. The results to the switching losses estimated by simulation are compared with the results in a practical realized converter.

  4. Behavior of FRP Link Slabs in Jointless Bridge Decks

    Directory of Open Access Journals (Sweden)

    Aziz Saber

    2012-01-01

    Full Text Available The paper investigated the use of fiberglass-reinforced plastic (FRP grid for reinforcement in link slabs for jointless bridge decks. The design concept of link slab was examined based on the ductility of the fiberglass-reinforced plastic grid to accommodate bridge deck deformations. The implementation of hybrid simulation assisted in combining the experimental results and the theoretical work. The numerical analyses and the experimental work investigated the behavior of the link slab and confirmed its feasibility. The results indicated that the technique would allow simultaneous achievement of structural need, lower flexural stiffness of the link slab approaching the behavior of a hinge, and sustainability need of the link slab. The outcome of the study supports the contention that jointless concrete bridge decks may be designed and constructed with fiberglass-reinforced plastic grid link slabs. This concept would also provide a solution to a number of deterioration problems associated with bridge deck joints and can be used during new construction of bridge decks. The federal highway administration provided funds to Louisiana Department of Transportation through the innovative bridge research and development program to implement the use of FRP grid as link slab.

  5. TMD-Based Structural Control of High Performance Steel Bridges

    International Nuclear Information System (INIS)

    The purpose of this study is to investigate the effectiveness of structural control using tuned mass damper (TMD) for suppressing excessive traffic induced vibration of high performance steel bridge. The study considered 1-span steel plate girder bridge and bridge-vehicle interaction using HS-24 truck model. A numerical model of steel plate girder, traffic load, and TMD is constructed and time history analysis is performed using commercial structural analysis program ABAQUS 6.10. Results from analyses show that high performance steel bridge has dynamic serviceability problem, compared to relatively low performance steel bridge. Therefore, the structural control using TMD is implemented in order to alleviate dynamic serviceability problems. TMD is applied to the bridge with high performance steel and then vertical vibration due to dynamic behavior is assessed again. In consequent, by using TMD, it is confirmed that the residual amplitude is appreciably reduced by 85% in steady-state vibration. Moreover, vibration serviceability assessment using 'Reiher-Meister Curve' is also remarkably improved. As a result, this paper provides the guideline for economical design of I-girder using high performance steel and evaluates the effectiveness of structural control using TMD, simultaneously.

  6. A Decision Support System for Concrete Bridge Maintenance

    Science.gov (United States)

    Rashidi, Maria; Lemass, Brett; Gibson, Peter

    2010-05-01

    The maintenance of bridges as a key element in transportation infrastructure has become a major concern for asset managers and society due to increasing traffic volumes, deterioration of existing bridges and well-publicised bridge failures. A pivotal responsibility for asset managers in charge of bridge remediation is to identify the risks and assess the consequences of remediation programs to ensure that the decisions are transparent and lead to the lowest predicted losses in recognized constraint areas. The ranking of bridge remediation treatments can be quantitatively assessed using a weighted constraint approach to structure the otherwise ill-structured phases of problem definition, conceptualization and embodiment [1]. This Decision Support System helps asset managers in making the best decision with regards to financial limitations and other dominant constraints imposed upon the problem at hand. The risk management framework in this paper deals with the development of a quantitative intelligent decision support system for bridge maintenance which has the ability to provide a source for consistent decisions through selecting appropriate remediation treatments based upon cost, service life, product durability/sustainability, client preferences, legal and environmental constraints. Model verification and validation through industry case studies is ongoing.

  7. Fragility curves of concrete bridges retrofitted by column jacketing

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The Northridge earthquake inflicted various levels of damage upon a large number of Caltrans' bridges not retrofitted by column jacketing. In this respect, this study represents results of fragility curve development for two (2) sample bridges typical in southern California, strengthened for seismic retrofit by means of steel jacketing of bridge columns. Monte Carlo simulation is performed to study nonlinear dynamic responses of the bridges before and after column retrofit. Fragility curves in this study are represented by Iognormal distribution functions with two parameters and developed as a function of PGA. The sixty (60) ground acceleration time histories for the Los Angeles area developed for the Federal Emergency Management Agcncy (FEMA) SAC (SEAOC-ATC-CUREe) steel project are used for the dynamic analysis of the bridges.The improvement in the fiagility with steel jacketing is quantified by comparing fragility curves of the bridge before and after column retrofit. In this first attempt to formulate the problem of fragility enhancement, the quantification is made by comparing the median values of the fragility curves before and after the retrofit. Under the hypothesis that this quantification also applies to empirical fragility curves developed on the basis of Northridge earthquake damage, the enhanced version of the empirical curves is developed for the ensuing analysis to determine the enhancement of transportation network performance due to the retrofit.

  8. Procurement of Beams in Multiple D&B Bridge Projects

    Directory of Open Access Journals (Sweden)

    CT. Ramanathan

    2010-06-01

    Full Text Available Selected infrastructure development projects are being implemented by Design and Build (D&B pocurement system in Sabah (East Malaysia by the Public Works Department (PWD. In the first phase 45 bridge replacement projects were awarded in 5 packages. These simultaneous multiple Bridge projects are for the development of the backward areas and hence their timely completion is utmost important. Procurement and production of bridge beams have been the critical element of construction in these rural areas and no researches has been reported on various aspects of procurement of the bridge beams in multiple D&B projects. The aspects of procurement researched in this work include the determination of a common beam element for the ease of procurement and the optimization of the construction methodology, the finalization and purchasing plate dimensions to suite the manufacturer's production range, the delivery of materials, the planning and monitoring of fabrication, the preparation and assembly, and the erection and launching of beams. The beams are optimized using element optimization techniques. The most important problems in fabricating steel girders were in planning and scheduling of materials for the fabrication and the fabrication process. Findings in all the aspects of production of steel girders are highlighted through a case study of six long span bridges at various locations in Sabah. Solutions drawn from lessons learnt which minimize wastages, and aids in timely completion of beams in multiple bridge construction are discussed.

  9. An integrated FBG sensing system for bridge health monitoring

    Science.gov (United States)

    Sun, Ru-Jiao; Sun, Zhi; Dan, Dan-Hui; Sun, Li-Min

    2006-03-01

    Thanking to its distinguishing advantages including wavelength multiplexing capability, miniature size, high sensitivity, immunity from electro-magnetic interference and etc, the fiber Bragg grating (FBG) sensing technologies are regarded as a competent candidate for the bridge long-term health monitoring. According to the shifted Bragg wavelength of the light reflected by a fiber grating, the FBG sensors can accurately measure various physical properties such as strain, temperature, displacement, acceleration and corrosion. One special advantage of the FBG sensing technology is that only one demodulation device is required to acquire various physical properties simultaneously. Compared with the bridge health monitoring system using conventional sensors, this advantage makes the quasi-distributed sensing possible and data transmission more convenient because many FBG sensors can be connected in series by a single fiber. In this paper, an integrated FBG sensing system is presented for monitoring the physical state of a real bridge, the main-navigation channel cable-stayed bridge of the Donghai Bridge. The strain variation of two selected sections in the construction stage and during the load trial test are continuously monitored. The results of this study will supply a good guidance for the use of FBG sensors on the health monitoring of real bridges. Finally, the paper present the design and fabrication of an accelerometer based on the FBG technology for structure vibration monitoring.

  10. Identification of the operational frequencies of 300+ bridges using smartphones

    Science.gov (United States)

    Castellanos, Sebastián.; Marulanda, Johannio; Preciado, Mónica; Cruz, Alejandro; Thomson, Peter

    2016-04-01

    A country's economic development depends heavily on transportation networks and hence, as a vital aspect, bridge structures must function safely at all times. Structural Health Monitoring (SHM) and Damage Prognosis (DP) of bridges should be a priority in order to prevent deterioration, avoid collapse and ensure user's safety. One objective of SHM for civil structures is the behavior assessment due to ambient, operational and seismic excitations, for which acceptable ranges are established for the variation of dynamic properties. Through Operational Modal Analysis (OMA) it is possible to estimate operational frequencies of a bridge and provide a measure of its current dynamic behavior. These frequencies can then be used for future comparisons to revise if the structure has been damaged or has experienced changes due to environmental conditions. In this paper, vertical and horizontal operational frequencies of more than 300 vehicular and pedestrian bridges of the transportation network of Santiago de Cali, Colombia, were estimated using ambient vibration tests. Data were obtained using smartphones and processed using frequency domain analyses. Correlations of these frequencies with the structural characteristics of the bridges are presented. The results of this study represent the current state of each bridge and provide a baseline for future evaluations of changes due to environmental conditions or damage.

  11. Bridge aerodynamics and aeroelasticity: A comparison of modeling schemes

    Science.gov (United States)

    Wu, Teng; Kareem, Ahsan

    2013-11-01

    Accurate modeling of wind-induced loads on bridge decks is critical to ensure the functionality and survivability of long-span bridges. Over the last few decades, several schemes have emerged to model bridge behavior under winds from an aerodynamic/aeroelastic perspective. A majority of these schemes rely on the quasi-steady (QS) theory. This paper systematically compares and assesses the efficacy of five analytical models available in the literature with a new model presented herein. These models include: QS theory-based model, corrected QS theory-based model, linearized QS theory-based model, semi-empirical linear model, hybrid model, and the proposed modified hybrid model. The ability of these models to capture fluid memory and nonlinear effects either individually or collectively is examined. In addition, their ability to include the effects of turbulence in the approach flow on the bridge behavior is assessed. All models are compared in a consistent manner by utilizing the time domain approach. The underlying role of each model in capturing the physics of bridge behavior under winds is highlighted and the influence of incoming turbulence and its interaction with the bridge deck is examined. A discussion is included that focuses on a number of critical parameters pivotal to the effectiveness of corresponding models.

  12. Fabrication and visualization of capillary bridges in slit pore geometry.

    Science.gov (United States)

    Broesch, David J; Frechette, Joelle

    2014-01-01

    A procedure for creating and imaging capillary bridges in slit-pore geometry is presented. High aspect ratio hydrophobic pillars are fabricated and functionalized to render their top surfaces hydrophilic. The combination of a physical feature (the pillar) with a chemical boundary (the hydrophilic film on the top of the pillar) provides both a physical and chemical heterogeneity that pins the triple contact line, a necessary feature to create stable long but narrow capillary bridges. The substrates with the pillars are attached to glass slides and secured into custom holders. The holders are then mounted onto four axis microstages and positioned such that the pillars are parallel and facing each other. The capillary bridges are formed by introducing a fluid in the gap between the two substrates once the separation between the facing pillars has been reduced to a few hundred micrometers. The custom microstage is then employed to vary the height of the capillary bridge. A CCD camera is positioned to image either the length or the width of the capillary bridge to characterize the morphology of the fluid interface. Pillars with widths down to 250 µm and lengths up to 70 mm were fabricated with this method, leading to capillary bridges with aspect ratios (length/width) of over 100(1). PMID:24457446

  13. Incorporation of nondestructive evaluation in Pontis Bridge Management System

    Science.gov (United States)

    Hadavi, Ahmad

    1998-03-01

    The highway system in the United States includes nearly 577,000 bridges, the majority of which were built during two major bridge building periods -- just before World War II (1930s) and in the first two decades of the Cold War (1950s and 1960s). Given the age and increased usage of these bridges over the years, many now require substantial maintenance to satisfy their desired level of service. The complex task of allocating scarce funds for the repair, maintenance, and rehabilitation of this large number of bridges led to the development of several optimization studies and two major bridge management system, namely BRIDGIT and Pontis. Pontis has emerged as the system of choice for all states in the Nation. At this time over 40 highway agencies continue to license, evaluate and implement the current AASHTOWARE Program, Pontis V. 3.2. However, all data currently required by Pontis to assess the structural stability and resulting suggestions for repair and maintenance of bridges are based on visual inspection and judgement. Consequently, all suggestions are based on that visual inspection. This paper discusses development of a plan for how non-destructive evaluation (NDE) data can be used to provide more information than visual inspection.

  14. 紧水滩大桥桥型方案设计%The Bridge Type Design Scheme of Jinshuitan Bridge

    Institute of Scientific and Technical Information of China (English)

    杨成峰; 邱白

    2014-01-01

    This paper introduces the design scheme of bridge type of Jinshuitan Bridge, compares the three kinds of schemes of the deck concrete arch bridge, prestressed concrete T beams and prestressed concrete continuous rigid frame bridge, and gi-ves the relevant conclusions and recommendations. Its design experience can be used for reference in the professional design personnel.%本文介绍了紧水滩大桥的桥型方案设计,比较了上承式混凝土拱桥、预应力砼 T 梁及预应力砼连续刚构等三种桥型方案,并给出相关结论和建议。其设计经验可供专业设计人员参考。

  15. Road Bridges and Culverts, Bridges, Published in 2006, 1:24000 (1in=2000ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Road Bridges and Culverts dataset, published at 1:24000 (1in=2000ft) scale, was produced all or in part from Field Survey/GPS information as of 2006. It is...

  16. Reduction of Bridge Construction and Maintenance Costs through Coupled Geotechnical and Structural Design of Integral Abutment Bridges

    OpenAIRE

    Frosch, Robert J; Bobet, Antonio; Khasawneh, Yazen

    2014-01-01

    Elimination expansion joints in the superstructure of integral abutment bridges offers the advantage of reducing the initial and life cycle costs of the structure. However, such elimination may have an adverse effect on the displacement demand at the pile-abutment connection and on the earth pressures on the abutment wall due to the thermal expansion/contraction cycles of the bridge. These adverse effects have resulted in regulations that impose restrictions on the maximum length and skew ang...

  17. 下沉式桥——摩西桥%Sunken Bridge Moses Bridge

    Institute of Scientific and Technical Information of China (English)

    Ro&AD

    2012-01-01

    The West Brabant Water Line is a defence-line consisting of a series of fortresses and cities with inundation areas in the south-west of the Netherlands. It dates from the 17th century but fell into disrepair in the 19th century. When the water line was finally restored, an access bridge across the moat of one of the fortresses, Fort de Roovere, was needed. This fort now has a new, recreational function and lies on several routes for cycling and hiking. It is, of course, highly improper to build bridges across the moats of defence works, especially on the side of the fortress the enemy was expected to appear on. That's why we designed an invisible bridge. Its construction is entirely made of wood, waterproofed with EPDM foil. The bridge lies like a trench in the fortress and the moat, shaped to blend in with the outlines of the landscape. The bridge can't be seen from a distance because the ground and the water come all the way up to its edge. When you get closer, the fortress opens up to you through a narrow trench. You can then walk up to its gates like Moses on the water.%西Brabant河线是一个防护攻势.是荷兰西南地区的保护线.它由很多要塞城堡和带有排水渠的城市组成。它最早修建于17世纪.但是到了19世纪就失修了。这条防护攻势重新修复后.其中的FortdeRoovere城堡(护城河的一个要塞)需要一个穿越河流的桥。该城堡现在已经有了新的功能.它位于多个爬山及自行车道的交汇处。当然在一个防卫攻势旁边建造多个桥梁是非常不合适的。因此我们选择见一个看不见的桥。整个桥身全部都是用木材建造而成.采用了EPDM金属泊片防水材料。整个桥身就如同碉堡与护城河之间的沟渠.与周边的景观环境完全融合。您在远处是看不到这个桥的.因为河水的高度与桥的边缘一样高。

  18. Killure Bridge Nursing Home, Airport Road, Waterford.

    LENUS (Irish Health Repository)

    Bazzi, M D

    1990-08-21

    The calcium-binding properties of calcium- and phospholipid-dependent protein kinase C (PKC) were investigated by equilibrium dialysis in the presence and the absence of phospholipids. Calcium binding to PKC displayed striking and unexpected behavior; the free proteins bound virtually no calcium at intracellular calcium concentrations and bound limited calcium (about 1 mol\\/mol of PKC) at 200 microM calcium. However, in the presence of membranes containing acidic phospholipids, PKC bound at least eight calcium ions per protein. The presence of 1 microM phorbol dibutyrate (PDBu) in the dialysis buffer had little effect on these calcium-binding properties. Analysis of PKC-calcium binding by gel filtration under equilibrium conditions gave similar results; only membrane-associated PKC bound significant amounts of calcium. Consequently, PKC is a member of what may be a large group of proteins that bind calcium in a phospholipid-dependent manner. The calcium concentrations needed to induce PKC-membrane binding were similar to those needed for calcium binding (about 40 microM calcium at the midpoint). However, the calcium concentration required for PKC-membrane binding was strongly influenced by the phosphatidylserine composition of the membranes. Membranes with higher percentages of phosphatidylserine required lower concentrations of calcium. These properties suggested that the calcium sites may be generated at the interface between PKC and the membrane. Calcium may function as a bridge between PKC and phospholipids. These studies also suggested that calcium-dependent PKC-membrane binding and PKC function could be regulated by a number of factors in addition to calcium levels and diacylglycerol content of the membrane.

  19. Scour and Scour Countermeasures at Bridge Sites

    Institute of Scientific and Technical Information of China (English)

    CHIEW Yee-Meng

    2008-01-01

    This paper examines scour and scour countermeasures at bridge piers and abutments.Abutment scour is by far more complex than its counterpart associated with piers because of the possibility of the presence of a floodplain. Notwithstanding this, the mechanism of scour at both piers and abutments is very similar; moreover, the failure mechanisms associated with both armor-ing and flow-altering countermeasures are not very different. In rivers with a floodplain, abutment scour becomes much more complex. In cases where the abutment ends at or near to the flood-plain, it can initiate bank erosion, which clearly is an important erosion problem that is quite distinct from the customary scour at either an abutment in rivers without a floodplain or a pier. For this rea-son, abutment scour can be very site-specific while pier-scour is more generic in nature. To this end, the ability to identify the type of abutment scour that may form in a particular channel is closely related to an engineer's ability to propose devices for effective scour countermeasure.By summarizing research efforts on using riprap as a pier or abutment countermeasure over the past few decades, this paper highlights the deficiencies of riprap in arresting pier scour. To this end,different failure mechanisms are identified. They are shear failure, winnowing failure, edge failure,bedform-induced failure and bed-degradation induced failure. Each failure mechanism can singly or, more likely, combine to cause the eventual breakdown of the riprap layer. The study shows that a riprap layer is vulnerable to other failure mechanisms even though it is adequately designed against shear failure, rendering it ineffective in arresting scour.

  20. Bridging the gap between GCMs and CRMs

    Science.gov (United States)

    Silvers, Levi; Stevens, Bjorn; Hohenegger, Cathy

    2014-05-01

    Bridging the gap between GCMs and CRMs Radiative Convective Equilibrium (RCE) has proven to be a useful framework for process studies. In the past there has been little direct overlap of the studies made using General Circulation Models (GCMs), and Cloud Resolving Models (CRMs). GCMs use global or near global domain sizes with resolutions ranging from 300 km to 20 km, while CRMs normally use domains roughly equivalent to a single GCM grid cell and resolutions ranging from 5km to 0.1km. Here we study the atmosphere of a General Circulation Model (GCM) with boundary conditions that approximate Radiative Convective Equilibrium (RCE) across a range of domain sizes (from 45 % of the surface of the Earth to 500x500 km^2) and resolutions of 20 km and 10 km. To that aim we use the newly developed nonhydrostatic, primitive equation model named ICON with horizontally uniform insolation and ozone, no rotation, and a prescribed surface temperature. Comparison of the simulations leads to a better understanding of the mechanisms and assumptions that underlay the parameterizations of GCMs. Climate sensitivity and convective organization are the two physical processes we focus on with this study. Both of these processes are important components of a physical understanding of the Earth system. Convective organization strongly influences the mean state of the atmosphere and the various feedback responses to radiative perturbations. We compare changes in the TOA radiative imbalance which result from prescribed changes in the surface temperature across our simulations. This provides a direct calculation of the various feedback mechanisms. The magnitude of the influence these feedbacks have on a system is commonly diagnosed through the climate sensitivity. We examine the dependence on domain size and parameterization schemes of the convective organization and climate sensitivity. Initial results with two physics parameterization packages indicate that ICON provides a convenient

  1. Multivariate Feature Selection for Predicting Scour-Related Bridge Damage using a Genetic Algorithm

    Science.gov (United States)

    Anderson, I.

    2015-12-01

    Scour and hydraulic damage are the most common cause of bridge failure, reported to be responsible for over 60% of bridge failure nationwide. Scour is a complex process, and is likely an epistatic function of both bridge and stream conditions that are both stationary and in dynamic flux. Bridge inspections, conducted regularly on bridges nationwide, rate bridge health assuming a static stream condition, and typically do not include dynamically changing geomorphological adjustments. The Vermont Agency of Natural Resources stream geomorphic assessment data could add value into the current bridge inspection and scour design. The 2011 bridge damage from Tropical Storm Irene served as a case study for feature selection to improve bridge scour damage prediction in extreme events. The bridge inspection (with over 200 features on more than 300 damaged and 2,000 non-damaged bridges), and the stream geomorphic assessment (with over 300 features on more than 5000 stream reaches) constitute "Big Data", and together have the potential to generate large numbers of combined features ("epistatic relationships") that might better predict scour-related bridge damage. The potential combined features pose significant computational challenges for traditional statistical techniques (e.g., multivariate logistic regression). This study uses a genetic algorithm to perform a search of the multivariate feature space to identify epistatic relationships that are indicative of bridge scour damage. The combined features identified could be used to improve bridge scour design, and to better monitor and rate bridge scour vulnerability.

  2. D4.2 Guideline for Load and Resistance Assessment of Existing European Railway Bridges - Sustainable Bridges - Assessment for future traffic demands and longer lives

    OpenAIRE

    EUROPEAN COMMISSION

    2007-01-01

    The bridge assessment in many aspects is very similar to the bridge design. The same basic principles lie at the heart of the process. Nevertheless, an important difference lies in the fact when a bridge is being designed, an element of conservatism is generally a good thing that can be achieved with very little additional costs. When a bridge is being assessed, it is important to avoid unnecessarily conservative measures because of the financial implications that may follow the decision of r...

  3. Structural health monitoring of bridges using accelerometers – a case study at Apollo Bridge in Bratislava

    Directory of Open Access Journals (Sweden)

    Alojz Kopáčik

    2015-04-01

    Full Text Available Building structures are extremely sensitive at influence of outdoor conditions. Most often these are the influence of wind, sunshine, temperature changes of the surrounding and at least the influence of the own or other loading. According to resonance of the structure with the surrounding is coming to vibration and oscillation in relative high frequency interval (0.1 Hz - 100.0 Hz. These phenomena significantly affect the static and dynamic characteristics of structures, their safety and functionality. The paper brings example of monitoring these phenomena. The object of monitoring is the Danube Bridge Apollo in Bratislava, which main steel structure was measured by acceleration sensors with frequency up to10 Hz. The main topic of the paper is the analysis of dynamic behaviour of structure using spectral analysis method. The usage of Fourier Transform is described, own frequencies and amplitudes of structure oscillation are calculated.

  4. Investigation of fiber bridging in double cantilever beam specimens

    Science.gov (United States)

    Johnson, W. S.; Mangalgiri, P. D.

    1987-01-01

    The possibility to eliminate fiber bridging or at least to reduce it, and to evaluate an alternative approach for determination of in situ mode 7 fracture toughness values of composite matrix materials were investigated. Double cantilver beam (DCB) specimens were made using unidirectional lay-ups of T6C/Hx205 composite material in which the delaminating halves were placed at angles of 0, 1.5, and 3 degrees to each other. The small angles between the delaminating plies were used to avoid fiber nesting without significantly affecting mode I teflon insert. The DCB specimens were fabricated and it was found that: (1) the extent which fiber bridging and interlaminar toughness increase with crack length can be reduced by slight cross ply at the delamination plane to reduce fiber nesting; (2) some fiber bridging may occur even in the absence of fiber nesting; (3) the first values of toughness measured ahead of the thin teflon insert are very close to the toughness of the matrix material with no fiber bridging; (4) thin adhesive bondline of matrix material appears to give toughness values equal to the interlaminar toughness of the composite matrix without fiber bridging.

  5. Bridging history and social psychology: what, how and why.

    Science.gov (United States)

    Glăveanu, Vlad; Yamamoto, Koji

    2012-12-01

    This special issue aims to bridge history and social psychology by bringing together historians and social psychologists in an exercise of reading and learning from each other's work. This interdisciplinary exercise is not only timely but of great importance for both disciplines. Social psychologists can benefit from engaging with historical sources by being able to contextualise their findings and enrich their theoretical models. It is not only that all social and psychological phenomena have a history but this history is very much part of present-day and future developments. On the other hand historians can enhance their analysis of historical sources by drawing upon the conceptual tools developed in social psychology. They can "test" these tools and contribute to their validation and enrichment from completely different perspectives. Most important, as contributions to this special issue amply demonstrate, psychology's "historical turn" has the potential to shed a new light on striking, yet underexplored, similarities between contemporary public spheres and their pre-modern counterparts. This issue thereby calls into question the dichotomy between traditional and de-traditionalized societies-a distinction that lies at the heart of many social psychology accounts of the world we live in. The present editorial will introduce and consider this act of bridging history and social psychology by focusing on three main questions: What is the bridge made of? How can the two disciplines be bridged? and Why we cross this interdisciplinary bridge? In the end a reflection on the future of this collaboration will be offered.

  6. Modelling the Flow Structure in Local Scour Around Bridge Pier

    Directory of Open Access Journals (Sweden)

    Usman Ghani

    2014-04-01

    Full Text Available Bridge pier scouring is an important issue of any bridge design work. If it is not taken into account properly, then results will be disastrous. A number of bridges have failed due to clear water local scouring of piers. This research paper presents a numerical model study in which an attempt has been made to explore the flow variables which exist in and around a scoured bridge pier. A finite volume based model of bridge pier was developed using 3D (Three Dimensional numerical code FLUENT and GAMBIT. After validation process, different discharge values were considered and its impact on three dimensional characteristics of flow such as stream-wise velocities on longitudinal and transverse sections, turbulance circulation cells, and boundary shear stresses was investigated. It was observed that increasing the discharge results in more turbulance around the pier on its downstream side and turbulence properties are intensified in such a situation. However, the primary velocities on the downstream side remain almost unchanged. The results have been presented in the form of contours, vector of primary velocities and x-y plots of bed shear stresses. This study can be used for enhanced understanding of flow features and improvement of formulae for prediction of scour holes around piers

  7. Performance-based concept on seismic evaluation of existing bridges

    Institute of Scientific and Technical Information of China (English)

    Yu-Chi Sung; Wen-I Liao; W.Phillip Yen

    2009-01-01

    Conventional seismic evaluation of existing bridges explores the ability of a bridge to survive under significant earthquake excitations. This approach has several major drawbacks, such as only a single structural performance of near collapse is considered, and the simplified approach of adopting strength-based concept to indirectly estimate the nonlinear behavior of a structure lacks accuracy. As a result, performance-based concepts that include a wider variety of structural performance states of a given bridge excited by different levels of earthquake intensity is needed by the engineering community. This paper introduces an improved process for the seismic evaluation of existing bridges. The relationship between the overall structural performance and earthquakes with varying levels of peak ground acceleration (PGA) can successfully be linked. A universal perspective on the seismic evaluation of bridges over their entire life-cycle can be easily obtained to investigate multiple performance objectives. The accuracy of the proposed method, based on pushover analysis, is proven in a case study that compares the results from the proposed procedure with additional nonlinear time history analyses.

  8. Effect of surfactant on kinetics of thinning of capillary bridges

    Science.gov (United States)

    Nowak, Emilia; Kovalchuk, Nina; Simmons, Mark

    2015-11-01

    Kinetics of thinning of capillary bridges is of great scientific and industrial interest being of vital importance for example in various emulsification and microfluidic processes. It is well known that the rate of bridge thinning is proportional to the interfacial tension. Therefore it is expected that the process should slow down by addition of surfactant. The kinetics of capillary bridges in the presence of surfactant was studied by the dripping of liquid from a capillary tip under conditions of nearly zero flow rate (We personal care products. The viscosity, surfactant activity and adsorption kinetics have been controlled by addition of glycerol and sodium chloride. The study has shown that the kinetics of capillary bridges are determined by dynamic surface tension rather than by its equilibrium value. In particular, the kinetics of the bridge thinning for the 0.1 g L-1 aqueous SLES solution is practically the same as that of pure water despite twice lower equilibrium surface tension. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.

  9. Ex post socio-economic assessment of the Oresund Bridge

    DEFF Research Database (Denmark)

    Knudsen, M.Aa.; Rich, Jeppe

    2013-01-01

    The paper presents an ex post socio-economic assessment of the Oresund Bridge conducted ten years after the opening in July 2000. The study applies historical micro data to re construct the travel pattern with no bridge in place and compare this to the current situation. To complete the socio......-economic assessment, the consumer benefits including all freight and passenger modes, are compared with the cost profile of the bridge. The monetary contributions are extrapolated to a complete 50 year period. It is revealed that the bridge from 2000–2010 generated a consumer surplus of €2 billion in 2000 prices...... discounted at 3.5% p.a., which should be compared with a total construction cost of approximately €4 billion. Seen over the 50 year period and by assuming a medium growth scenario the bridge is expected to generate an internal rate of return in the magnitude of 9% corresponding to a benefit-cost rate of 2...

  10. Technique for Determining Bridge Displacement Response Using MEMS Accelerometers.

    Science.gov (United States)

    Sekiya, Hidehiko; Kimura, Kentaro; Miki, Chitoshi

    2016-02-19

    In bridge maintenance, particularly with regard to fatigue damage in steel bridges, it is important to determine the displacement response of the entire bridge under a live load as well as that of each member. Knowing the displacement response enables the identification of dynamic deformations that can cause stresses and ultimately lead to damage and thus also allows the undertaking of appropriate countermeasures. In theory, the displacement response can be calculated from the double integration of the measured acceleration. However, data measured by an accelerometer include measurement errors caused by the limitations of the analog-to-digital conversion process and sensor noise. These errors distort the double integration results. Furthermore, as bridges in service are constantly vibrating because of passing vehicles, estimating the boundary conditions for the numerical integration is difficult. To address these problems, this paper proposes a method for determining the displacement of a bridge in service from its acceleration based on its free vibration. To verify the effectiveness of the proposed method, field measurements were conducted using nine different accelerometers. Based on the results of these measurements, the proposed method was found to be highly accurate in comparison with the reference displacement obtained using a contact displacement gauge.

  11. Technique for Determining Bridge Displacement Response Using MEMS Accelerometers

    Directory of Open Access Journals (Sweden)

    Hidehiko Sekiya

    2016-02-01

    Full Text Available In bridge maintenance, particularly with regard to fatigue damage in steel bridges, it is important to determine the displacement response of the entire bridge under a live load as well as that of each member. Knowing the displacement response enables the identification of dynamic deformations that can cause stresses and ultimately lead to damage and thus also allows the undertaking of appropriate countermeasures. In theory, the displacement response can be calculated from the double integration of the measured acceleration. However, data measured by an accelerometer include measurement errors caused by the limitations of the analog-to-digital conversion process and sensor noise. These errors distort the double integration results. Furthermore, as bridges in service are constantly vibrating because of passing vehicles, estimating the boundary conditions for the numerical integration is difficult. To address these problems, this paper proposes a method for determining the displacement of a bridge in service from its acceleration based on its free vibration. To verify the effectiveness of the proposed method, field measurements were conducted using nine different accelerometers. Based on the results of these measurements, the proposed method was found to be highly accurate in comparison with the reference displacement obtained using a contact displacement gauge.

  12. Seismic Response Analysis of Continuous Multispan Bridges with Partial Isolation

    Directory of Open Access Journals (Sweden)

    E. Tubaldi

    2015-01-01

    Full Text Available Partially isolated bridges are a particular class of bridges in which isolation bearings are placed only between the piers top and the deck whereas seismic stoppers restrain the transverse motion of the deck at the abutments. This paper proposes an analytical formulation for the seismic analysis of these bridges, modelled as beams with intermediate viscoelastic restraints whose properties describe the pier-isolator behaviour. Different techniques are developed for solving the seismic problem. The first technique employs the complex mode superposition method and provides an exact benchmark solution to the problem at hand. The two other simplified techniques are based on an approximation of the displacement field and are useful for preliminary assessment and design purposes. A realistic bridge is considered as case study and its seismic response under a set of ground motion records is analyzed. First, the complex mode superposition method is applied to study the characteristic features of the dynamic and seismic response of the system. A parametric analysis is carried out to evaluate the influence of support stiffness and damping on the seismic performance. Then, a comparison is made between the exact solution and the approximate solutions in order to evaluate the accuracy and suitability of the simplified analysis techniques for evaluating the seismic response of partially isolated bridges.

  13. Preliminary study to facilitate smart structure systems in bridge girders

    Science.gov (United States)

    Kirkpatrick, Thomas C.; Peterson, Danford O.; Rossi, Peter J.; Ray, Laura R.; Livingston, Richard A.

    1999-05-01

    Sensors are currently available and used to monitor structural performance and loads incurred by bridges already in service. However, there has been limited research concerning the stresses that steel bridge girders endure during transport from the manufacturer to the job site and during the installation process. This paper reports the measured stresses on steel bridge girders during transportation from Lancaster, PA to Hanover, NH and during construction of the Ledyard Bridge on the New Hampshire - Vermont border. Two different monitoring system were developed for this data acquisition in a mobile environment. The first, a fiber optic strain monitoring system, utilizing Bragg grating technology. The second utilized an electrical- resistive foil strain gage network, in conjunction with wireless telemetry equipment. Together, these two systems formed a smart structure system for monitoring bridge girders while confirming the accuracy of data gathered through redundancy. Result conclusively demonstrated for the first time, that stresses in beams during transportation are significant and approach the factor of safety margin in girder design.

  14. Rotational Angle Measurement of Bridge Support Using Image Processing Techniques

    Directory of Open Access Journals (Sweden)

    Young-Soo Park

    2016-01-01

    Full Text Available Measuring a very small rotational angle accurately and dynamically is indeed a challenging issue, especially in the case of bridge support. Also, existing inclinometers do not have sufficient resolution and accuracy to measure a bridge’s rotational angle. In this study, a new measurement system was developed to provide a practical means for measuring dynamic rotational angle of a bridge support. It features high resolution and accuracy compared with the available systems on the market. By the combinational use of a laser pointer and a vision-based displacement measurement system, the measurement accuracy was significantly increased. The accuracy and applicability were investigated through laboratory tests. From the laboratory tests, it has been found that the developed system can be applicable to bridge support with very small rotational angle. The effectiveness of the developed system was verified through field tests on real bridges. From the full-scale implementation on two PSC girder bridges, it is observed that the proposed system can measure the rotational angle with a high accuracy and reliability.

  15. Altered cross-bridge properties in skeletal muscle dystrophies

    Directory of Open Access Journals (Sweden)

    Aziz eGuellich

    2014-10-01

    Full Text Available Force and motion generated by skeletal muscle ultimately depends on the cyclical interaction of actin with myosin. This mechanical process is regulated by intracellular Ca2+ through the thin filament-associated regulatory proteins i.e.; troponins and tropomyosin. Muscular dystrophies are a group of heterogeneous genetic affections characterized by progressive degeneration and weakness of the skeletal muscle as a consequence of loss of muscle tissue which directly reduces the number of potential myosin cross-bridges involved in force production. Mutations in genes responsible for skeletal muscle dystrophies have been shown to modify the function of contractile proteins and cross-bridge interactions. Altered gene expression or RNA splicing or post-translational modifications of contractile proteins such as those related to oxidative stress, may affect cross-bridge function by modifying key proteins of the excitation-contraction coupling. Micro-architectural change in myofilament is another mechanism of altered cross-bridge performance. In this review, we provide an overview about changes in cross-bridge performance in skeletal muscle dystrophies and discuss their ultimate impacts on striated muscle function.

  16. US-Korea collaborative research for bridge monitoring test beds

    Science.gov (United States)

    Yun, C. B.; Sohn, H.; Lee, J. J.; Park, S.; Wang, M. L.; Zhang, Y. F.; Lynch, J. P.

    2010-04-01

    This paper presents an interim report on an international collaborative research project between the United States and Korea that fundamentally addresses the challenges associated with integrating structural health monitoring (SHM) system components into a comprehensive system for bridges. The objective of the project is to integrate and validate cutting-edge sensors and SHM methods under development for monitoring the long-term performance and structural integrity of highway bridges. A variety of new sensor and monitoring technologies have been selected for integration including wireless sensors, EM stress sensors and piezoelectric active sensors. Using these sensors as building blocks, the first phase of the study focuses on the design of a comprehensive SHM system that is deployed upon a series of highway bridges in Korea. With permanently installed SHM systems in place, the second phase of the study provides open access to the bridges and response data continuously collected as an internal test-bed for SHM. Currently, basic facilities including Internet lines have been constructed on the test-beds, and the participants carried out tests on bridges on the test road section owned by the Korea Expressway Corporation (KEC) with their own measurement and monitoring systems in the local area network environment. The participants were able to access and control their measurement systems by using Remote Desktop in Windows XP through Internet. Researchers interested in this test-bed are encouraged to join in the collaborative research.

  17. Bamboo Reinforced Concrete Truss Bridge for Rural Infrastructure

    Directory of Open Access Journals (Sweden)

    D. Nuralinah

    2014-04-01

    Full Text Available Bamboo is one of a potential renewable construction material in the village. Bamboo is known to have a high mechanical strength in direction of the fibers. The weakness of bamboo in lateral direction of the fiber could be solved by constructing a composite structure with the concrete. The appropriate construction with hold the loads in axial direction is a truss structure. In a bamboo concrete truss structure, the bars are composed from the concrete column with a bamboo reinforcement. The research studies about the performance of the bridge and the effect of loading position on the strain and deformation of bamboo reinforced concrete truss bridge. The bridge whose span and width are respectively 1.5 m and 1.2 m was prepared. Load applied to the truss bridge conducted by using vehicle load changes with position. Mounting the strains gauge in bamboo reinforcement of primary truss is to observe the strain. The LVDT is used to observe the deflection of the truss bridge. The results show that the loading position influences the strain and deformation as well as a theoretical view.

  18. Freestanding 3D supramolecular particle bridges: fabrication and mechanical behavior.

    Science.gov (United States)

    Ling, Xing Yi; Phang, In Yee; Schönherr, Holger; Reinhoudt, David N; Vancso, G Julius; Huskens, Jurriaan

    2009-06-01

    Freestanding particle bridges with controlled composition and macroscopic robustness are demonstrated by the use of supramolecular nanoparticle assembly. Self-assembly of nanoparticles, templating, and supramolecular glue infiltration are combined to form stable and ordered three-dimensional polystyrene particle composites on a polydimethylsiloxane stamp. Freestanding hybrid polystyrene nanoparticle bridges are obtained by transfer printing of the hybrid structures onto topographically patterned substrates via host-guest interactions. The mechanical robustness and rigidity of the particle bridges can be controlled by manipulating the layer-by-layer cycles of supramolecular glues of gold nanoparticles and dendrimers. Atomic force microscopy-based microbending results, in particular the location and force-dependent deflection behavior, confirm that the particle bridge fulfills the classical supported-beam characteristics. As estimated from classical beam theory, the bending moduli of the particle bridges vary between 0.8 and 1.1 GPa, depending on the degree of filling by the supramolecular glues. Failure analysis on the particle structure indicates linear elastic behavior and a plastic deformation upon failure. PMID:19373830

  19. Performance assessment of resistance bridges and multimeters used at CMS

    International Nuclear Information System (INIS)

    Automatic balancing ac resistance bridges, ASL F18 and F700, and HP 3458A millimetres are the measurement instruments used by Center for Measurement Standards (CMS) for the calibration of standard platinum resistance thermometers (SPRTs), industrial platinum resistance thermometers (IPRTs), and liquid-in-glass thermometers (LIG) respectively. The inherent non-linearity of these measurement instruments could be a significant source of uncertainty and the absolute accuracy is especially critical to the primary instrument. A resistance bridge calibrator RBC 100, manufactured by 2K electronics, is a resistor network for the purpose of assessing their linearity and absolute accuracies of the foregoing thermometry bridges and meters. Each thirty-five normal measurements gives the linearity with 4.781 x 10-8, 4.982 x 10-7, and 6.371 x 10-5 Ω for F18, F700, and HP 3458A, however this deteriorates to 2.661 x 10-7 and 3.227 x 10-6 for two bridges while considering both normal and complementary data. Additionally, the possible contributions from the F18 bridge to the uncertainty of SPRT measurement at ITS-90 fixed points were investigated also

  20. RECONSTRUCTION AND REINFORCEMENT OF BRIDGE ACROSS THE RIVER. SYLVA IN KUNGUR, RUSSIA

    Directory of Open Access Journals (Sweden)

    R. Ye. Heizn

    2010-04-01

    Full Text Available Sylva Bridge at Kungur city is one of the oldest road bridges in Perm region, the West Urals, Russia. Its erection was begun in 1912 and was interrupted with the First World War and the further events in Russia. The bridge was opened only in 1931. For 75 years of bridge operation the most part of bridge constructions has been acquired plural damages, both mechanical and corrosion. After the bridge inspection in 2003 and according to the calculations of its capacity, the decision on reconstruction of the bridge was accepted. The purpose of rehabilitation was to replace the timber deck by steel orthotropic deck with asphalt pavement. A new deck was to be engaged in combined action with the existing metal structures with the help of socles with high-strength bolts. Due to this, the bridge carrying capacity was increased as required by the present standards. In 2006, after tests, the bridge was opened for traffic.

  1. Truck-based mobile wireless sensor networks for the experimental observation of vehicle–bridge interaction

    International Nuclear Information System (INIS)

    Heavy vehicles driving over a bridge create a complex dynamic phenomenon known as vehicle–bridge interaction. In recent years, interest in vehicle–bridge interaction has grown because a deeper understanding of the phenomena can lead to improvements in bridge design methods while enhancing the accuracy of structural health monitoring techniques. The mobility of wireless sensors can be leveraged to directly monitor the dynamic coupling between the moving vehicle and the bridge. In this study, a mobile wireless sensor network is proposed for installation on a heavy truck to capture the vertical acceleration, horizontal acceleration and gyroscopic pitching of the truck as it crosses a bridge. The vehicle-based wireless monitoring system is designed to interact with a static, permanent wireless monitoring system installed on the bridge. Specifically, the mobile wireless sensors time-synchronize with the bridge's wireless sensors before transferring the vehicle response data. Vertical acceleration and gyroscopic pitching measurements of the vehicle are combined with bridge accelerations to create a time-synchronized vehicle–bridge response dataset. In addition to observing the vehicle vibrations, Kalman filtering is adopted to accurately track the vehicle position using the measured horizontal acceleration of the vehicle and positioning information derived from piezoelectric strip sensors installed on the bridge deck as part of the bridge monitoring system. Using the Geumdang Bridge (Korea), extensive field testing of the proposed vehicle–bridge wireless monitoring system is conducted. Experimental results verify the reliability of the wireless system and the accuracy of the vehicle positioning algorithm

  2. Truck-based mobile wireless sensor networks for the experimental observation of vehicle-bridge interaction

    Science.gov (United States)

    Kim, Junhee; Lynch, Jerome P.; Lee, Jong-Jae; Lee, Chang-Geun

    2011-06-01

    Heavy vehicles driving over a bridge create a complex dynamic phenomenon known as vehicle-bridge interaction. In recent years, interest in vehicle-bridge interaction has grown because a deeper understanding of the phenomena can lead to improvements in bridge design methods while enhancing the accuracy of structural health monitoring techniques. The mobility of wireless sensors can be leveraged to directly monitor the dynamic coupling between the moving vehicle and the bridge. In this study, a mobile wireless sensor network is proposed for installation on a heavy truck to capture the vertical acceleration, horizontal acceleration and gyroscopic pitching of the truck as it crosses a bridge. The vehicle-based wireless monitoring system is designed to interact with a static, permanent wireless monitoring system installed on the bridge. Specifically, the mobile wireless sensors time-synchronize with the bridge's wireless sensors before transferring the vehicle response data. Vertical acceleration and gyroscopic pitching measurements of the vehicle are combined with bridge accelerations to create a time-synchronized vehicle-bridge response dataset. In addition to observing the vehicle vibrations, Kalman filtering is adopted to accurately track the vehicle position using the measured horizontal acceleration of the vehicle and positioning information derived from piezoelectric strip sensors installed on the bridge deck as part of the bridge monitoring system. Using the Geumdang Bridge (Korea), extensive field testing of the proposed vehicle-bridge wireless monitoring system is conducted. Experimental results verify the reliability of the wireless system and the accuracy of the vehicle positioning algorithm.

  3. Change in trunk muscle activities with prone bridge exercise in patients with chronic low back pain.

    Science.gov (United States)

    Kong, Yong-Soo; Park, Seol; Kweon, Mi-Gyong; Park, Ji-Won

    2016-01-01

    [Purpose] The aim of this study was to determine the effect of three different bridge exercises on internal oblique, external oblique, transverse abdominis, and erector spinae activities. [Subjects and Methods] Forty-five subjects with chronic low back pain participated in this study. The training outcome was evaluated with three different testing methods: supine bridge exercise, supine bridge on Swiss ball exercise, and prone bridge exercise. The activities of the transverse abdominis, internal oblique, external oblique, and erector spinae were measured using surface electromyography. [Results] There were significant differences in the internal oblique, external oblique, and erector spinae according to the three kinds of bridging exercises. The internal oblique, external oblique and transverse abdominis activities were highest in the prone bridge exercise, followed by those in the supine bridge on Swiss ball exercise, and supine bridge exercises. The activity of erector spine was highest in the supine bridge on Swiss ball exercise followed by the supine bridge exercise and prone bridge exercise. [Conclusion] These results suggest that prone bridge exercise is more effective than conventional supine bridge exercise and supine bridge on Swiss ball in increasing trunk muscle activity of chronic low back pain patients.

  4. Rapid-to-deploy wireless monitoring systems for static and dynamic load testing of bridges: validation on the Grove Street Bridge

    Science.gov (United States)

    Hou, Tsung-Chin; Lynch, Jerome P.

    2006-03-01

    Bridge management officials have expressed a keen interest in the use of low-cost and easy-to-install wireless sensors to record bridge responses during short-term load testing. To illustrate the suitability of wireless sensors for short-term monitoring of highway bridges, a wireless monitoring system is installed upon the Grove Street Bridge to monitor structural responses during static and dynamic load testing. Specifically, load testing of the Grove Street Bridge is conducted after its construction to validate the behavior of a novel jointless bridge deck constructed from a high-performance fiber reinforced cementitious composite (HPFRCC) material. A heterogeneous array of sensing transducers are installed in the bridge including metal foil strain gages, accelerometers and linear variable differential transducers (LVDTs). First, the acceleration response of the bridge is monitored by the wireless system during routine traffic loading. Modal parameters (modal frequencies and mode shapes) are calculated by the wireless sensors so that an analytical model of the bridge constructed in a standard commercial finite element package can be updated off-line. Next, the bridge is closed to traffic and trucks of known weight are parked on the bridge to induce static deformations. The installation strategy of the wireless monitoring system during static load testing is optimized to monitor the strain and rotation response of the HPFRCC deck. The measured static response of the deck is compared to that predicted by the updated analytical model.

  5. Teachers as Bridges: Educating for a Better Tomorrow

    Directory of Open Access Journals (Sweden)

    Julian Kitchen

    2010-01-01

    Full Text Available Teachers act as bridges for their students. Teachers link young individuals to the knowledge and traditions of society. Through their professional practice and dedication, they help students develop the skills to succeed in school and in the world. In their classes, teachers help students relate to each other across cultures, which is crucial to the development and vitality of civil society in a changing world. Dedicated teachers are bridges reaching out to exceptional students or to underappreciated subjects. Visionary teachers develop innovative approaches that offer hope of a brighter future for everyone. The articles in this issue of Brock Education all highlight different ways in which educators are bridges to a better tomorrow.

  6. Novel Silver Cobaltacarborane Complexes with a Linearly Bridging Halide

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun Seo; Bae, Hye Jin; Do, Youngkyu [KAIST, Daejeon (Korea, Republic of); Park, Youngwhan [LG Chem/Research Park, Daejeon (Korea, Republic of); Go, Min Jeong; Lee, Junseong [Chonnam National Univ., Gwangju (Korea, Republic of)

    2013-10-15

    The structural versatility of halides mainly originates from their coordinating abilities of adopting a bridging bond between two or more metal atoms, as well as a terminal bond. Moreover, a halide bridging bond angle is so flexible that thermodynamic stability can be endowed with proper geometry, which conceptually varies from acute to right, obtuse, and linear. In spite of innumerable reports on molecular metal halides, examples of the linearly bridging fashion are very scarce. The reason for the rarity of the linear M. X. M arrangement can be easily explained by the VSEPR (Valence Shell Electron Pair Repulsion) concept. The linear M. X. M formation has only been achieved by adopting a macrocyclic chelate ligand, which is structurally demanding, so that the VSEPR repulsions among lone-pair electrons on the halide atom could be overcome.

  7. Dynamics of a current bridge in a coaxial plasma accelerator

    Science.gov (United States)

    Voronin, A. V.; Gusev, V. K.; Kobyakov, S. V.

    2011-07-01

    The pioneering investigation of the behavior of a current bridge in a coaxial accelerator with pulsed delivery of a working gas liberated from titanium hydride by an electrical discharge is reported. A new method to trace the motion of the current bridge using LEDs is suggested. The behavior of the current bridge in accelerators with axial and radial gas injection is studied. The parameters of an accelerator generating a pure plasma jet with a high kinetic energy (such as the size and polarity of electrodes, gas flow direction, and time delay between the delivery of the gas to the accelerator and its ionization) are optimized. The applicability of an electrodynamic model to this type of accelerator is discussed. Good agreement between experimental data and calculation results is obtained.

  8. Fracture Mechanics Prediction of Fatigue Life of Aluminum Highway Bridges

    DEFF Research Database (Denmark)

    Rom, Søren; Agerskov, Henning

    2015-01-01

    Fracture mechanics prediction of the fatigue life of aluminum highway bridges under random loading is studied. The fatigue life of welded joints has been determined from fracture mechanics analyses and the results obtained have been compared with results from experimental investigations....... The fatigue life of welded plate specimens has been investigated. Both the fracture mechanics analyses and the fatigue tests have been carried out using load histories, which correspond to one week's traffic loading, determined by means of strain gauge measurements on the deck structure of the Farø Bridges...... against fatigue in aluminum bridges, may give results which are unconservative. Furthermore, it was in both investigations found that the validity of the results obtained from Miner's rule will depend on the distribution of the load history in tension and compression....

  9. Towards Sustainable Construction: Life Cycle Assessment of Railway Bridges

    DEFF Research Database (Denmark)

    Du, Guangli

    implementation is under great expectations to set a new design criterion, to optimize the structural design towards the environmental sustainability, and to assist the decision-making among design proposals. This thesis consists of two parts: an extended summary and three appended papers. Part one gives......Since last few decades, the increased pressure from the environmental issues of natural resource depletion, global warming and air pollution have posed a great challenge worldwide. Among all the industrial fields, bridge infrastructures and their belonged construction sector contribute to a wide...... a more detailed theoretical review of the current literatures and knowledge associated with bridge LCA, by highlighting the great challenging issues. A systematic flowchart is presented both in Paper I and Paper II for how to model and assess the bridge life cycle, together by coping with the structural...

  10. Evacuation of mixed populations from trains on bridges

    DEFF Research Database (Denmark)

    Kindler, C.; Sørensen, J.G.; Dederichs, A.S.

    2012-01-01

    An understanding of human evacuation dynamics and performance are important when designing complex buildings such as bridges and when applying performance-based codes in order to reduce the risk of exposing occupants to critical conditions in case of fire. The majority of previous studies deal...... with the evacuation behavior of abled bodied homogeneous groups. Hence, a significant part of the population is poorly described such as are people with impairments which are about 10%-21% of the world's population, furthermore elderly people, giving an additional 10% and 20% of the population are aged below 15 years....... The discussion of "equal access" is only followed slowly by the demand on "equal egress". However, the passengers on trains on bridges are rarely homogeneous mixture. At the same time equal egress is far from assured today. In this paper the evacuation of mixed populations from trains on bridges are considered...

  11. Scale-Bridging Model Development for Coal Particle Devolatilization

    CERN Document Server

    Schroeder, Benjamin B; Smith, Philip J; Fletcher, Thomas H; Packard, Andrew; Frenklach, Michael; Hegde, Arun; Li, Wenyu; Oreluk, James

    2016-01-01

    When performing large-scale, high-performance computations of multi-physics applications, it is common to limit the complexity of physics sub-models comprising the simulation. For a hierarchical system of coal boiler simulations a scale-bridging model is constructed to capture characteristics appropriate for the application-scale from a detailed coal devolatilization model. Such scale-bridging allows full descriptions of scale-applicable physics, while functioning at reasonable computational costs. This study presents a variation on multi-fidelity modeling with a detailed physics model, the chemical percolation devolatilization model, being used to calibrate a scale-briding model for the application of interest. The application space provides essential context for designing the scale-bridging model by defining scales, determining requirements and weighting desired characteristics. A single kinetic reaction equation with functional yield model and distributed activation energy is implemented to act as the scal...

  12. The measurement of bridging social capital in population health research.

    Science.gov (United States)

    Villalonga-Olives, E; Kawachi, I

    2015-11-01

    Social capital is defined as the resources available to individuals and groups through membership in social networks. The definition is consistent with either an individualistic approach or a collective approach. Social capital can be further classified according to bonding versus bridging social capital (e.g. relationships between individuals who are homogeneous or heterogeneous with respect to social class, race/ethnicity, or other attributes). We conducted a systematic review via Pubmed, the ISI web of knowledge and OVID of the studies that examined bridging social capital in public health settings. Our results indicate lack of consistency or uniformity in the operationalization of bridging social capital. We identify some promising approaches to measurement that should be further investigated in future studies.

  13. Modeling of cable vibration effects of cable-stayed bridges

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The analysis of dynamic responses of cable-stayed bridges subjected to wind and earthquake loads generallyconsiders only the motions of the bridge deck and pylons. The influence of the stay cable vibration on the responses of the bridgeis either ignored or considered by approximate procedures. The transverse vibration of the stay cables, which can be significant insome cases, are usually neglected in previous research. In the present study, a new three-node cable element has been developed tomodel the transverse motions of the cables. The interactions between the cable behavior and the other parts of the bridgesuperstructure are considered by the concept of dynamic stiffness. The nonlinear effect of the cable caused by its self-weight isincluded in the formulation. Numerical examples are presented to demonstrate the accuracy and efficiency of the proposed model.The impact of cable vibration behavior on the dynamic characteristics of cable-stayed bridges is discussed.

  14. Comparison of several innovative bridge cable surface modifications

    DEFF Research Database (Denmark)

    Kleissl, Kenneth; Georgakis, Christos T.

    into the effectiveness of helical fillets and pattern-indented surfaces has shown that, be-sides their purported ability to suppress rain-wind induced vibrations, they also modestly reduce drag forces at design wind velocities. This is of particular interest to bridge designers, as wind on stay planes of long......Over the last two decades, several bridge cable manufacturers have introduced surface modifications on the high-density polyethylene (HDPE) sheathing that is installed for the protection of inner cable strands or wires. The modifications are based on research undertaken predominantly in Europe...... and Japan, with two different prevailing systems: HDPE tubing fitted with helical fillets and tubing with pattern-indented surfaces. In the US and Europe, helical fillets dominate, whilst pattern indented sur-faces are more common in Asia, particularly for long-span cable-stayed bridges. Research...

  15. Comparisons of bridges flutter derivatives and generalized ones

    Institute of Scientific and Technical Information of China (English)

    Fuyou XU; Airong CHEN; Zhe ZHANG; Cailiang HUANG

    2009-01-01

    The causes of the nonlinearity of self-excited aerodynamic force of bridge are interpreted from such two aspects as amplitude and wind velocity. The concept of "generalized flutter derivative" is proposed, and its physical meaning is illustrated. The graphs of the general-ized flutter derivatives of plate and Sutong Bridge section model are plotted. The characteristics of all generalized flutter derivatives are compared and analyzed, and their superiorities are verified. The results indicate that the physical meaning of generalized flutter derivatives are more explicit compared to the traditional ones. It is more convenient to understand the nonlinearity properties of self-excited aerodynamic force of bridge according to the generalized flutter derivatives graphs with the wind velocity as the horizontal coordinate.

  16. Optimization Analysis Model of Self-Anchored Suspension Bridge

    Directory of Open Access Journals (Sweden)

    Pengzhen Lu

    2014-01-01

    Full Text Available The hangers of self-anchored suspension bridge need to be tensioned suitably during construction. In view of this point, a simplified optimization calculation method of cable force for self-anchored suspension bridge has been developed based on optimization theories, such as minimum bending energy method, and internal force balanced method, influence matrix method. Meanwhile, combined with the weak coherence of main cable and the adjacently interaction of hanger forces, a simplified analysis method is developed using MATLAB, which is then compared with the optimization method that consider the main cable's geometric nonlinearity with software ANSYS in an actual example bridge calculation. This contrast proves the weak coherence of main cable displacement and the limitation of the adjacent cable force influence. Furthermore, a tension program that is of great reference value has been developed; some important conclusions, advices, and attention points have been summarized.

  17. Thermal Effect of the Cable-Stayed Bridge Tower

    Institute of Scientific and Technical Information of China (English)

    ZhangHai-long; LiJun; LiuChang-guo; JiangTian-hua; Weijun

    2003-01-01

    This paper studies the thermal effect of the cable-stayed bridge tower based on full time accurate measurement and finite element analysis on Xiantao Hanjiang River Highway Bridge. The measured results and the displacement variation of top tower show that the tower rotates periodically when it is exposed in sunshine. But the tower column will not decline when there is no sunshine. In spite of in winter or in summer, the period when the tower column changed smallest is from 0:00 am to 5:00 am. The time period when the tower column has maximum deviation lags behind the time when the tower column has maximum temperature difference, and this phenomenon is obvious in winter. The conclusions also have directive value in predicting the tower deformations and their directions in construction control of cable-stayed bridge, and in verifying the finite element program.

  18. Thermal Effect of the Cable-Stayed Bridge Tower

    Institute of Scientific and Technical Information of China (English)

    Zhang Hai-long; Li Jun; Liu Chang-guo; Jiang Tian-hua; Wei jun

    2003-01-01

    This paper studies the thermal effect of the cable-stayed bridge tower based on full time accurate measurement and finite element analysis on Xiantao Hanjiang River Highway Bridge. The measured results and the displacement variation of top tower show that the tower rotates periodically when it is exposed in sunshine. But the tower column will not decline when there is no sunshine. In spite of in winter or in summer, the period when the tower column changed smallest is from 0∶00 am to 5∶00 am. The time period when the tower column has maximum deviation lags behind the time when the tower column has maximum temperature difference, and this phenomenon is obvious in winter. The conclusions also have directive value in predicting the tower deformations and their directions in construction control of cable-stayed bridge, and in verifying the finite element program.

  19. Wind Resistant Design of Bridges in Japan Developments and Practices

    CERN Document Server

    Fujino, Yozo; Tanaka, Hiroshi

    2012-01-01

    For long-span bridges, wind action is a dominant factor in their safety and serviceability. A large number of long-span bridges have been built in Japan over the past 30 years, and tremendous amounts of research and technical development have been accomplished in wind resistant design. This book is a compilation of the results of active research and development. Wind resistant design standards generated in Japan are described in the first few chapters. Then comes information such as design wind speed, structural damping, wind tunnel tests, and analyses, which provide the basis of the design standards. Wind-induced vibrations and their control of girders, towers, cables, and other features are explained with examples of field measurements. Comprehensive listings of Japanese experience in vibration control are also presented. Because achieving particularly dynamic safety against wind is still not an easy task, these data and information will be valuable assets for the wind-engineering and bridge-engineering com...

  20. NDT-based bridge condition assessment supported by expert tools

    Science.gov (United States)

    Bień, J.; KuŻawa, M.

    2016-06-01

    This paper is focused on the progress in the application of Expert Tools supporting integration of inspection and NDT testing findings in order to effectuate effective decision making by bridge owners. Possibilities of knowledge representation in the intelligent computer Expert Tools by means of the multi-level hybrid network technology are described. These multi-level hybrid networks can be built of neural, fuzzy and functional components depending on the problem that needs to be solved and on the type of available information. Application of the technology is illustrated by an example of the Bridge Evaluation Expert Function (BEEF) implemented in the Railway Bridge Management System "SMOK" operated by the Polish State Railways.

  1. FORTRESS BRIDGES IN KINGDOM OF POLAND IN THE PASKIEWICZOWSKA AGE

    Directory of Open Access Journals (Sweden)

    Marek RUTKOWSKI

    2015-03-01

    Full Text Available The article analyzes problem of construction of the fortress bridges in Kingdom of Poland, when it was occupied by Russians in the period after the fall of November Uprising in 1831. By presenting of some diverse solutions adopted in two different Russian strongholds localized within the Polish territory, it was possible to show at the same time a broad spectrum of this phenomenon, focusing both on construction efforts made by Russian military occupation authorities as well as by the local Polish civilian administration. The obtained data should allow us to argue for construction in the mentioned period of fortress bridges with use of both already proven and established methods and of new solutions. In the same time one might add thesis concernig (especially visible among highest ranks staff of Russian army significant uncertainty about the very nature and scope of possible availability of fortress bridges.

  2. Optimum design of concrete cable-stayed bridges

    Science.gov (United States)

    Martins, Alberto M. B.; Simões, Luís M. C.; Negrão, João H. J. O.

    2016-05-01

    The design of cable-stayed bridges involves a significant number of design variables and design objectives. The concrete cable-stayed bridge optimization is formulated here as a multi-objective optimization problem with objectives of minimum cost, minimum deflections and minimum stresses. A numerical method is developed to obtain the optimum design of such structures. This numerical method includes: structural analysis, sensitivity analysis and optimization. The structural analysis accounts for all the relevant effects (concrete time-dependent effects, construction stages and geometrical nonlinear effects). The structural response to changes in the design variables is achieved by a discrete direct sensitivity analysis procedure, and an entropy-based approach was used for structural optimization. The features and applicability of the proposed method are demonstrated by numerical examples concerning the optimization of a real-sized concrete cable-stayed bridge.

  3. Buffeting Response of Suspension Bridge Girder with Separate Control Flaps

    DEFF Research Database (Denmark)

    Huynh, Truc; Thoft-Christensen, Palle

    This paper presents the calculation of the root mean square (RMS) response of a suspension bridge using separate control flaps (SCF) in turbulence conditions. It is assumed that the mean wind velocity is not large enough to cause coupled vibrations and that single mode buffeting response is of in......This paper presents the calculation of the root mean square (RMS) response of a suspension bridge using separate control flaps (SCF) in turbulence conditions. It is assumed that the mean wind velocity is not large enough to cause coupled vibrations and that single mode buffeting response...... on the basis of independent flutter derivatives and independent aeroelastic coefficients from the girder and from the flaps. The theory is demonstrated by a numerical example based on a long-span suspension bridge model with the Great Belt girder....

  4. Proton production, neutralisation and reduction in a floating water bridge

    Science.gov (United States)

    Sammer, Martina; Wexler, Adam D.; Kuntke, Philipp; Wiltsche, Helmar; Stanulewicz, Natalia; Lankmayr, Ernst; Woisetschläger, Jakob; Fuchs, Elmar C.

    2015-10-01

    This work reports on proton production, transport, reduction and neutralization in floating aqueous bridges under the application of a high dc voltage (‘floating water bridge’). Recently possible mechanisms for proton transfer through the bridge were suggested. In this work we visualize and describe the production of protons in the anolyte and their neutralization in the catholyte. Apart from that, protons are reduced to hydrogen due to electrolysis. Microbubbles are detached instantly, due to the electrohydrodynamic flow at the electrode surface. No larger, visible bubbles are formed and the system degasses through the bridge due to its higher local temperature. A detailed analysis of trace elements originating from beaker material, anode or the atmosphere is presented, showing that their influence on the overall conduction compared to the contribution of protons is negligible. Finally, an electrochemical rationale of high voltage electrolysis of low ionic strength solutions is presented.

  5. Case Study on 4000 m-span Cable-stayed Suspension Bridge

    OpenAIRE

    Haijun Wang; Jiandong Wang; Hua Wei

    2014-01-01

    This study describes the case studies for a cable-stayed suspension bridges proposed over the Tsugaru Strait, Japan. Center Bridge is designed as a compound bridge of suspension bridges and cable-stayed bridges with 4000 m super-long-span. Case studies about the effects of cable-stayed bridge length, the design of sub-cable, height and stiffness of main tower, type of foundation and length of side span on displacement were carried out. With appropriate design of above parameters, the compound...

  6. Innovative configurations for long-span suspension bridges

    OpenAIRE

    Bartoli, G.; P. D’Asdia; S. Febo; C. Mannini; S. Noè; L. Procino

    2009-01-01

    This paper reports the results of a piece of research about long-span suspension bridges with multiple-box girder steel deck characterized by low drag coefficient and high aeroelastic stability. For this type of bridges, by increasing the span length, the contribution to the stiffness of the suspension cables becomes dominant with respect to that of the deck, so that the ratio of the frequency of the first torsional mode to the frequency of the first vertical bending mode approaches unity, wh...

  7. Highway Bridge Assessment for Dynamic Interaction with Critical Vehicles

    OpenAIRE

    Cantero, Daniel; O'Brien, Eugene J.; González, Arturo; et al

    2009-01-01

    Dynamic vehicle-bridge interaction is often considered for the most common classes of vehicle such as the 5-axle articulated truck. However, the dynamic response of bridges to this type of trucks is quite different to the response to the vehicles more likely to feature in maximum-in-lifetime traffic loading events. This paper focuses on large (>100 tonne) cranes and crane-type vehicles that have been recorded at Weigh-in-Motion sites in Europe. This paper analyses the total bending moment due...

  8. Myocardial bridge: The cause of angina in a young man

    International Nuclear Information System (INIS)

    Myocardial bridging is basically the systolic narrowing of epicardial coronary arteries, secondary to their tunneled course in myocardium. Though it is a benign condition it can have the symptoms like acute coronary syndrome, arrhythmias and sudden cardiac death. We report a 32-year-old male, who presented with typical exertional angina, had positive exercise treadmill and thallium-201 test. Coronary angiography revealed myocardial bridge of distal left anterior descending coronary artery. He was put on β-blockers and was doing well at 8 years of follow-up

  9. The bridge helix coordinates movements of modules in RNA polymerase

    Directory of Open Access Journals (Sweden)

    Landick Robert

    2010-11-01

    Full Text Available Abstract The RNA polymerase 'bridge helix' is a metastable α-helix that spans the leading edge of the enzyme active-site cleft. A new study published in BMC Biology reveals surprising tolerance to helix-disrupting changes in a region previously thought crucial for translocation, and suggests roles for two hinge-like segments of the bridge helix in coordinating modules that move during the nucleotide-addition cycle. See Research article: http://www.biomedcentral.com/1741-7007/8/134

  10. Bridging UX and web development better results through team integration

    CERN Document Server

    Moffett, Jack

    2014-01-01

    The divide between UX and Web development can be stifling. Bridging UX and Web Development prepares you to break down those walls by teaching you how to integrate with your team's developers. You examine the process from their perspective, discovering tools and coding principles that will help you bridge the gap between design and implementation. With these tried and true approaches, you'll be able to capitalize on a more productive work environment. Whether you're a novice UX professional finding your place in the software industry and looking to nail down your technical skills, or a seasone

  11. Probabilistic Model for Fatigue Crack Growth in Welded Bridge Details

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard; Yalamas, Thierry;

    2013-01-01

    In the present paper a probabilistic model for fatigue crack growth in welded steel details in road bridges is presented. The probabilistic model takes the influence of bending stresses in the joints into account. The bending stresses can either be introduced by e.g. misalignment or redistribution...... of stresses in the structure. The fatigue stress ranges are estimated from traffic measurements and a generic bridge model. Based on the probabilistic models for the resistance and load the reliability is estimated for a typical welded steel detail. The results show that large misalignments in the...

  12. Identification from the Natural Response of Vasco Da Gama Bridge

    DEFF Research Database (Denmark)

    Cunha, A.; Caetano, E.; Brincker, Rune;

    2004-01-01

    This paper describes the reanalysis of the ambient vibration data of Vasco da Gama cable-stayed bridge with the purpose of testing the efficiency and accuracy of two recent and promising identification methods in a large application: the Frequency Domain Decomposition (FDD) and the Stochastic...... Subspace Identification (SSI) methods. The modal estimates obtained using these alternative approaches are compared, taking also into account the estimates previously obtained with the conventional Peak Picking technique from the free vibration test of the bridge, performed at the end of construction....

  13. Ultrafast vibrational energy relaxation of the water bridge.

    Science.gov (United States)

    Piatkowski, Lukasz; Wexler, Adam D; Fuchs, Elmar C; Schoenmaker, Hinco; Bakker, Huib J

    2012-05-14

    We report the energy relaxation of the OH stretch vibration of HDO molecules contained in an HDO:D(2)O water bridge using femtosecond mid-infrared pump-probe spectroscopy. We found that the vibrational lifetime is shorter (~630 ± 50 fs) than for HDO molecules in bulk HDO:D(2)O (~740 ± 40 fs). In contrast, the thermalization dynamics following the vibrational relaxation are much slower (~1.5 ± 0.4 ps) than in bulk HDO:D(2)O (~250 ± 90 fs). These differences in energy relaxation dynamics strongly indicate that the water bridge and bulk water differ on a molecular scale.

  14. Reliability assessment of welded steel details in bridges using inspection

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard; Yalamas, T.;

    2014-01-01

    membrane stresses are estimated using a generic bridge structure and traffic measurements. The optimal reliability level for a welded detail in a bridge subjected to fatigue are estimated by cost benefit-analysis taking into account the risk of human lives through the Life Quality Index. Since the optimal......This paper presents a bilinear two-dimensional probabilistic fracture mechanics model for fatigue crack growth in welded steel details. The model takes besides membrane stresses also the influence of misalignments and bending stresses in the welded detail into account. The distribution of the...

  15. Traffic restrictions due to wind on the Fehmarn Belt bridge

    DEFF Research Database (Denmark)

    Dellwik, E.; Mann, Jakob; Rosenhagen, G.

    2006-01-01

    This report documents the calculations carried out in order to estimate the wind climate at the site where the Fehmarn Belt bridge is planned. Further, an estimate of how often and for how long traffic restrictions will be enforced according to statedcriteria (sec. 3.2) is given. This estimate...... are the same as used in this report and here the comparison is satisfactory. We estimate that the prospective Fehmarn Belt bridge will be closed roughly 2% of the timefor light roadway vehicles (unloaded trucks and caravans), corresponding to 7 days per year. This is slightly less than for the Fehmarnsund...

  16. Thermal Bridges in Building Construction - Measurements and Calculations

    DEFF Research Database (Denmark)

    Rose, Jørgen

    The thesis investigates detailed calculation methods for evaluating heat loss through building envelope constructions, or more specific, thermal bridges. First a detailed description of the calculation methods, i.e. both calculation programs and guidelines, for calculating typical thermal bridges...... in building envelope constructions is given. After this a validation of both programs and guidelines is presented. The validation is performed by comparing calculated U-values with Guarded Hot Box measurements. The last part of the thesis discusses the possibilities of utilising the results of detailed...

  17. Long span cable supported bridges - present technology and trends

    DEFF Research Database (Denmark)

    Gimsing, Niels Jørgen

    1998-01-01

    The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues into the ......The activity within the field of long-span cable supported bridges has never been larger than at the end of the 20th century. The technology is well advanced to cope with the present challenges but it is also approaching its limits so if the trend towards ever increasing spans continues...

  18. Research on "bridge" mode of mine security production management

    Institute of Scientific and Technical Information of China (English)

    FENG Xi-wen; WANG Yi-gong

    2007-01-01

    Realized new break-through on the basis of existing security management theory, tentatively and creatively carried out "realizing management theory of mine security production" and proposed "bridge" mode of realizing green management theory. Green management theory has an integrated system structure. The green management system of mine security production includes three parts, the foundation of green system, the supervision system of green system operation and the safeguard system of green system.The key of "bridge" mode is to analyze the existing insecurity factors in the process of security production and establish corresponding regulations.

  19. Bridging properties of the debonded interface with frictional sliding

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A theoretical model simulating the properties of frictional bridging is presented and relatively perfect stress solutions for the fiber and matrix are obtained. Based on the energy equilibrium in the process of interfacial debonding, an expression for the energy release rate G is derived to explore the interfacial fracture properties. By introducing an interfacial debonding criterion G≥Γi, a method for determining the critical debond length is proposed and the bridging constitutive relationship is also obtained. Numerical calculations are conducted for the fiber-reinforced composite SCS-6/Ti-6Al-4V and the results are also compared with those obtained by using other existing models.

  20. A cellular automaton model for a bridge traffic bottleneck

    Institute of Scientific and Technical Information of China (English)

    Shifa Xiao; Lingjiang Kong; Muren Liu

    2005-01-01

    A cellular automaton (CA) model is proposed in this paper to analyze a bridge traffic bottleneck. The simulation results with this model show that there are several phase transitions in the traffic average density, velocity and flow for each lane under a periodic boundary condition. An unstable phase in the traffic average density and velocity for the upstream and downstream lanes of the bridge is shown in a range of initial traffic densities. The critical points of the phase transitions and the phenomenon of the unstable phase found in the simulation are also explained with the mean-field theory.