WorldWideScience

Sample records for baca geothermal field

  1. A geological and geophysical appraisal of the Baca geothermal field, Valles Caldera, New Mexico

    Science.gov (United States)

    Wilt, Michael; Vonder Haar, Stephen

    1986-03-01

    The Baca location #1 geothermal field is located in north-central New Mexico within the western half of the Plio-Pleistocene Valles Caldera. Steam and hot water are produced primarily from the northeast-trending Redondo Creek graben, where downhole temperatures exceed 260°C at depths of less than 2 km. Stratigraphically the reservoir region can be described as a five-layer sequence that includes Tertiary and Quaternary volcanic rocks, and Mesozoic and Tertiary sediments overlying Precambrian granitic basement. Production is mainly controlled by fractures and faults that are ultimately related to activity in the Rio Grande Rift system. Geophysically, the caldera is characterized by a gravity minimum and a resistivity low in its western half. A 40-mgal gravity minimum over the caldera is due mostly to the relatively low-density volcanics and sediments that fill the caldera and probably bears no relation to deep-seated magmatic sources. Two-dimensional gravity modeling indicates that the depth to Precambrian basement in Redondo Canyon is probably at least 3 km and may exceed 5 km in eastern parts of the caldera. Telluric and magnetotelluric surveys have shown that the reservoir region is associated with low resistivity and that a deep low-resistivity zone correlates well with the depth of the primary reservoir inferred from well data. Telluric and magnetotelluric data have also identified possible fault zones in the eastern and western sections of the production region that may form boundaries to the Redondo Creek reservoir. These data also suggest that the reservoir region is located at the intersection of lineaments that trend north-south and northeast-southwest. Magnetotelluric results indicate deep low resistivity at the western edge of the caldera which may be associated with deep hot fluids. On the basis of geophysical and well data, we make three estimates of reservoir dimensions. The estimates of the areal extent of the reservoir range from 10 to 30 km 2

  2. Geothermal materials survey: Baca Geothermal Demonstration Power Plant, Baca, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, P.F. II

    1980-10-07

    The results of a materials survey for the Baca 50 MW(e) single flash geothermal plant in the Valles Caldera of New Mexico are presented. From the design documents provided, materials proposed for use in contact with the plant atmosphere, the two-phase geofluid, the separated steam, and the recirculating condensate cooling water were assessed for suitability. Special emphasis was given to records of performance of the materials in other geothermal plants. Based upon these considerations of chemical reactivity and plant operating experience, a number of recommendations were made.

  3. Executive summaries of reports leading to the construction of the Baca Geothermal Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Sherwood, P.B.; Newman, K.L.; Westermeier, J.F.; Giroux, H.D.; Lowe, G.D.; Nienberg, M.W.

    1980-05-01

    Executive summaries have been written for 61 reports and compilations of data which in part, have led to the construction of the Baca 50 MW Geothermal Demonstration Project (GDP). The reports and data include environmental research, reservoir and feasibility studies, the project proposal to DOE and the Final Environmental Impact Statement. These executive summaries are intended to give the reader a general overview of each report prior to requesting the report from the GDP Data Manager.

  4. Executive summaries of reports leading to the construction of the Baca Geothermal Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Sherwood, P.B.; Newman, K.L.; Westermeier, J.F.; Giroux, H.D.; Lowe, G.D.; Nienberg, M.W.

    1980-05-01

    Executive summaries have been written for 61 reports and compilations of data which, in part, have led to the construction of the Baca 50 MW Geothermal Demonstration Project (GDP). The reports and data include environmental research, reservoir and feasibility studies, the project proposal to DOE and the Final Environmental Impact Statement. These executive summaries are intended to give the reader a general overview of each report prior to requesting the report from the GDP Data Manager.

  5. Baca Geothermal Demonstration project legal and regulatory challenges. First semi-annual report for period through June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Province, S.G.; Walter, K.M.; Miller, J.

    1980-12-01

    The Legal and Regulatory Constraints Reports identify and describe the major legal and institutional constraints associated with the Baca Geothermal Demonstration Project. The impacts of these constraints on the Project in terms of cost, schedule, and technical design are also analyzed. The purpose of these reports is to provide a guide for future geothermal development.

  6. BACA Project: geothermal demonstration power plant. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1982-12-01

    The various activities that have been conducted by Union in the Redondo Creek area while attempting to develop the resource for a 50 MW power plant are described. The results of the geologic work, drilling activities and reservoir studies are summarized. In addition, sections discussing the historical costs for Union's involvement with the project, production engineering (for anticipated surface equipment), and environmental work are included. Nineteen geothermal wells have been drilled in the Redondo Creek area of the Valles Caldera: a prominent geologic feature of the Jemez mountains consisting of Pliocene and Pleistocene age volcanics. The Redondo Creek area is within a complex longitudinal graben on the northwest flank of the resurgent structural dome of Redondo Peak and Redondo Border. The major graben faults, with associated fracturing, are geologically plausible candidates for permeable and productive zones in the reservoir. The distribution of such permeable zones is too erratic and the locations too imprecisely known to offer an attractive drilling target. Log analysis indicates there is a preferred mean fracture strike of N31W in the upper portion of Redondo Creek wells. This is approximately perpendicular to the major structure in the area, the northeast-striking Redondo Creek graben. The geothermal fluid found in the Redondo Creek reservoir is relatively benign with low brine concentrations and moderate H/sub 2/S concentrations. Geothermometer calculations indicate that the reservoir temperature generally lies between 500/sup 0/F and 600/sup 0/F, with near wellbore flashing occurring during the majority of the wells' production.

  7. Environmental impact in geothermal fields

    International Nuclear Information System (INIS)

    Generally, water exploitation and deep steam of geothermal fields may be cause of a pollution potential on the surface, specially by the chemical composition of geothermal water which has a high concentration of minerals, salts and heavy metals. The utilization of stable isotopes as deuterium and oxygen 18 as radioactive tracers and water origin indicators allow to know the trajectories and sources of background waters as well as possible moistures between geothermal waters and meteoric waters. Some ions such as chlorides and fluorides present solubilities that allow their register as yet long distances of their source. (Author)

  8. Field Geothermal Volcano Azufral (CO)

    International Nuclear Information System (INIS)

    The field geothermal Volcano Azufral is located to 60 km of Pasto City. It discharges waters chlorine-bicarbonates, diluted and of neuter pH. The riolitics of low k20, andesites, dacites as well as lava flows, hydro volcanic deposits due to events volcanic past and the influence of calcium like main component in the layer stamp are the main ones characteristic geologic of the volcanic area of Azufral. The layer stamp heats waters of the underground and it reacts until producing bicarbonates waters, more common type in the region. Glasses of sulfur toward the crater of the volcano are presented close to a sour lagoon. Thermal activity has been detected toward the southwest of the volcano with an area of covering of 1.47 there are, approximately. Changes in the last 14 years were determined by comparison of last chemical analysis with those obtained by INEA in 1996

  9. Environmental isotopes of geothermal fluids in Sibayak geothermal field

    International Nuclear Information System (INIS)

    Sibayak is located in a young volcanic area of North Sumatra, Indonesia. The surface manifestations such as acid springs, fumaroles and acid alterations indicate that Sibayak geothermal field is probably associated with the volcanic system. The aims of this study are to define the origin of the geothermal fluids, reservoir temperature and interactions between the volcanic system and the geothermal reservoir. Chemical composition, stable isotopes 18OH2O, 18OSO4, DH2O, 34SH2S, and 34SSO4 of water and gas samples from the geothermal surface manifestations and exploration wells are analyzed. δ18O and δD values show that the reservoir fluids of Sibayak geothermal field come from meteoric water that is recharged at an elevation of 1300-1500 masl. Geothermometers based on δ18OH2O-SO4, water chemistry (TNa-K-Ca) and gas chemistry (TH2-Ar) show similar reservoir temperatures that range from 250 to 280 deg. C. δ18O, δD isotope composition of the steam vents at the cone of Sibayak mountain, having the value of -2.9 per mille for δ18O and -44.9 per mille for δ D, shows magmatic inputs. (author)

  10. Klamath Falls geothermal field, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.; Culver, G.; Lund, J.W.

    1989-09-01

    Klamath Falls, Oregon, is located in a Known Geothermal Resource Area which has been used by residents, principally to obtain geothermal fluids for space heating, at least since the turn of the century. Over 500 shallow-depth wells ranging from 90 to 2,000 ft (27 to 610 m) in depth are used to heat (35 MWt) over 600 structures. This utilization includes the heating of homes, apartments, schools, commercial buildings, hospital, county jail, YMCA, and swimming pools by individual wells and three district heating systems. Geothermal well temperatures range from 100 to 230{degree}F (38 to 110{degree}C) and the most common practice is to use downhole heat exchangers with city water as the circulating fluid. Larger facilities and district heating systems use lineshaft vertical turbine pumps and plate heat exchangers. Well water chemistry indicates approximately 800 ppM dissolved solids, with sodium sulfate having the highest concentration. Some scaling and corrosion does occur on the downhole heat exchangers (black iron pipe) and on heating systems where the geo-fluid is used directly. 73 refs., 49 figs., 6 tabs.

  11. Cerro Prieto geothermal field: exploration during exploitation

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    Geological investigations at Momotombo included photogeology, field mapping, binocular microscope examination of cuttings, and drillhole correlations. Among the geophysical techniques used to investigate the field sub-structure were: Schlumberger and electromagnetic soundings, dipole mapping and audio-magnetotelluric surveys, gravity and magnetic measurements, frequency domain soundings, self-potential surveys, and subsurface temperature determinations. The geochemical program analyzed the thermal fluids of the surface and in the wells. The description and results of exploration methods used during the investigative stages of the Momotombo Geothermal Field are presented. A conceptual model of the geothermal field was drawn from the information available at each exploration phase. The exploration methods have been evaluated with respect to their contributions to the understanding of the field and their utilization in planning further development.

  12. Isotope study in geothermal fields in Java Island

    International Nuclear Information System (INIS)

    Study in two geothermal fields, Dieng and Kamojang, in Java island by utilizing isotope technique has been carried out. Isotopic data of wells, springs and other geothermal manifestations providing informations on the recharge area of precipitation contributed to geothermal resources, flow paths and origin of geothermal fluids. The data of oxygen shift has also provided information on the characteristic the fields. (author). 8 refs, 5 figs, 3 tabs

  13. Reservoir assessment of The Geysers Geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R.P.; Chapman, R.H.; Dykstra, H.

    1981-01-01

    Big Sulphur Creek fault zone, in The Geysers Geothermal field, may be part of a deep-seated, wrench-style fault system. Hydrothermal fluid in the field reservoir may rise through conduits beneath the five main anomalies associated with the Big Sulphur Creek wrench trend. Some geophysical anomalies (electrical resistivity and audio-magnetotelluric) evidently are caused by the hot water geothermal field or zones of altered rocks; others (gravity, P-wave delays, and possibly electrical resistivity) probably respresent the underlying heat source, a possible magma chamber; and others (microearthquake activity) may be related to the steam reservoir. A large negative gravity anomaly and a few low-resistivity anomalies suggest areas generally favorable for the presence of steam zones, but these anomalies apparently do not directly indicate the known steam reservoir. At the current generating capacity of 930 MWe, the estimated life of The Geysers Geothermal field reservoir is 129 years. The estimated reservoir life is 60 years for the anticipated maximum generating capacity of 2000 MWe as of 1990. Wells at The Geysers are drilled with conventional drilling fluid (mud) until the top of the steam reservoir is reached; then, they are drilled with air. Usually, mud, temperature, caliper, dual induction, and cement bond logs are run on the wells.

  14. Preliminary Environmental Impact Assessment for the Geothermal Field Chachimbiro in Ecuador. A Case Comparison with Bjarnarflag Geothermal Field in Iceland

    OpenAIRE

    Rodas, Mario A., 1979-

    2010-01-01

    The Chachimbiro geothermal area is located on the eastern flank of the Los Andes Western Mountain Range, in the province of Ibarra in Ecuador. This area is one of the many areas that had been investigated for the use of the geothermal steam, since Ecuador is the country with the most geothermal capacity among the countries that have not yet developed this energy. This study tries to determine the possible impacts of the exploration and production of this geothermal field and the implications ...

  15. Optimization of injection scheduling in geothermal fields

    Energy Technology Data Exchange (ETDEWEB)

    Lovekin, J.

    1987-05-01

    This study discusses the application of algorithms developed in Operations Research to the optimization of brine reinjection in geothermal fields. The injection optimization problem is broken into two sub-problems: (1) choosing a configuration of injectors from an existing set of wells, and (2) allocating a total specified injection rate among chosen injectors. The allocation problem is solved first. The reservoir is idealized as a network of channels or arcs directly connecting each pair of wells in the field. Each arc in the network is considered to have some potential for thermal breakthrough. This potential is quantified by an arc-specific break-through index, b/sub ij/, based on user-specified parameters from tracer tests, field geometry, and operating considerations. The sum of b/sub ij/-values for all arcs is defined as the fieldwide breakthrough index, B. Injection is optimized by choosing injection wells and rates so as to minimize B subject to constraints on the number of injectors and the total amount of fluid to be produced and reinjected. The study presents four computer programs which employ linear or quadratic programming to solve the allocation problem. In addition, a program is presented which solves the injector configuration problem by a combination of enumeration and quadratic programming. The use of the various programs is demonstrated with reference both to hypothetical data and an actual data set from the Wairakei Geothermal Field in New Zealand.

  16. Geothermal Resource Analysis and Structure of Basin and Range Systems, Especially Dixie Valley Geothermal Field, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    David Blackwell; Kenneth Wisian; Maria Richards; Mark Leidig; Richard Smith; Jason McKenna

    2003-08-14

    Publish new thermal and drill data from the Dizie Valley Geothermal Field that affect evaluation of Basin and Range Geothermal Resources in a very major and positive way. Completed new geophysical surveys of Dizie Valley including gravity and aeromagnetics and integrated the geophysical, seismic, geological and drilling data at Dizie Valley into local and regional geologic models. Developed natural state mass and energy transport fluid flow models of generic Basin and Range systems based on Dizie Valley data that help to understand the nature of large scale constraints on the location and characteristics of the geothermal systems. Documented a relation between natural heat loss for geothermal and electrical power production potential and determined heat flow for 27 different geothermal systems. Prepared data set for generation of a new geothermal map of North American including industry data totaling over 25,000 points in the US alone.

  17. Pilot fruit drier for Los Azufres geothermal field, Michoacan, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Lund, J.W.

    1993-02-01

    Comision Federal de Electricidad (CFE) has a Division in charge of the exploration of a geothermal reservoir located in Los Azufres, State of Michoacan. At present, CFE is only using the steam of the wells and rejecting the hot water that comes off associated with the steam. Based on a trip to the Los Azufres geothermal field in December of 1992, a design for a pilot geothermal fruit drier was undertaken for CFE. The details of the geothermal field and the local fruit production are detailed.

  18. Design of Steam Gathering System for Menengai Geothermal Field, Kenya

    OpenAIRE

    Onyango, Stephen Odhiambo, 1980-

    2015-01-01

    Utilizing high temperature geothermal resources for power generation requires design of steam gathering system to transport geothermal fluids. The aim of this project is develop a model that can be used to optimize the steam gathering and the re-injection systems in Menengai geothermal field. The objective function includes the capital investment and the operational cost. The constraints are the steam and water velocity and the upward slope of the two phase flow pipelines. To test the model, ...

  19. Structural investigations of Great Basin geothermal fields: Applications and implications

    Energy Technology Data Exchange (ETDEWEB)

    Faulds, James E [Nevada Bureau of Mines and Geology, Univ. of Nevada, Reno, NV (United States); Hinz, Nicholas H. [Nevada Bureau of Mines and Geology, Univ. of Nevada, Reno, NV (United States); Coolbaugh, Mark F [Great Basin Center for Geothermal Energy, Univ. of Nevada, Reno, NV (United States)

    2010-11-01

    Because fractures and faults are commonly the primary pathway for deeply circulating hydrothermal fluids, structural studies are critical to assessing geothermal systems and selecting drilling targets for geothermal wells. Important tools for structural analysis include detailed geologic mapping, kinematic analysis of faults, and estimations of stress orientations. Structural assessments are especially useful for evaluating geothermal fields in the Great Basin of the western USA, where regional extension and transtension combine with high heat flow to generate abundant geothermal activity in regions having little recent volcanic activity. The northwestern Great Basin is one of the most geothermally active areas in the USA. The prolific geothermal activity is probably due to enhanced dilation on N- to NNE-striking normal faults induced by a transfer of NW-directed dextral shear from the Walker Lane to NW-directed extension. Analysis of several geothermal fields suggests that most systems occupy discrete steps in normal fault zones or lie in belts of intersecting, overlapping, and/or terminating faults. Most fields are associated with steeply dipping faults and, in many cases, with Quaternary faults. The structural settings favoring geothermal activity are characterized by subvertical conduits of highly fractured rock along fault zones oriented approximately perpendicular to the WNW-trending least principal stress. Features indicative of these settings that may be helpful in guiding exploration for geothermal resources include major steps in normal faults, interbasinal highs, groups of relatively low discontinuous ridges, and lateral jogs or terminations of mountain ranges.

  20. Environmental isotope techniques in geothermal exploration with special reference to Indian geothermal fields (Paper No. IT-05)

    International Nuclear Information System (INIS)

    Environmental isotopes have acted as natural tracers to arrive at the origin of geothermal fluid components, their areas of recharge, their flow pattern and their interaction with the reservoir rocks and shallow groundwater. Also, isotope studies have thrown light on the residence times and base temperatures of the geothermal fluids and on the responses of geothermal fields to development and exploitation. These techniques are briefly described. Studies in Indian geothermal fields are mentioned. (author). 8 refs., 3 figs

  1. Development of an Enhanced Two-Phase Production System at the Geysers Geothermal Field; FINAL

    International Nuclear Information System (INIS)

    A method was developed to enhance geothermal steam production from two-phase wells at THE Geysers Geothermal Field. The beneficial result was increased geothermal production that was easily and economically delivered to the power plant

  2. The Geothermal Field Camp: Capacity building for geothermal energy systems in Indonesia

    Science.gov (United States)

    Moeck, I.; Sule, R.; Saptadji, N. M.; Deon, F.; Herdianita, N. R.; Jolie, E.; Suryantini, N.; Erbas, K.

    2012-04-01

    In July 2011, the first geothermal field camp was hold on Java/Indonesia near the city Bandung south of the volcanic field Tangkuban Perahu. The course was organized by the Institut Teknologie Bandung (ITB) and International Centre for Geothermal Research (ICGR) of the German Centre of Geosciences (GFZ). The purpose of the Geothermal Field Camp is to combine both field based work and laboratory analysis to ultimately better understand the data collected in field and to integrate data gained by various disciplines. The training belongs to a capacity building program for geothermal energy systems in Indonesia and initially aims to train the trainers. In a later stage, the educational personal trained by the Geothermal Field Camp shall be able to hold their individual Geothermal Field Camp. This is of special interest for Indonesia where the multitude of islands hindered a broad uniform education in geothermal energy systems. However, Indonesia hold the largest geothermal potential worldwide and educated personal is necessary to successfully develop this huge potential scattered over region in future. The interdisciplinary and integrative approach combined with field based and laboratory methodologies is the guiding principle of the Geothermal Field Camp. Tangkuban Perahu was selected because this field allows the integration of field based structural geological analysis, observation and sampling of geothermal manifestations as hot springs and sinters and ultimately of structural geology and surface geochemistry. This innovative training introduces in methods used in exploration geology to study both, fault and fracture systems and fluid chemistry to better understand the selective fluid flow along certain fractures and faults. Field geology covered the systematic measurement of faults and fractures, fault plane and fracture population analysis. In addition, field hydro-geochemistry focused on sampling techniques and field measurements onsite. Subsequent data analysis

  3. Radiotracer test in Kamojang geothermal field, West Java, Indonesia

    International Nuclear Information System (INIS)

    A tritium radiotracer study has been carried out at Kamojang geothermal field. Tritium tracer has been added to reinjection water in a production well, and then tritium content has been monitored in the surrounding production wells

  4. The Ahuachapan geothermal field, El Salvador: Reservoir analysis

    Energy Technology Data Exchange (ETDEWEB)

    Aunzo, Z.; Bodvarsson, G.S.; Laky, C.; Lippmann, M.J.; Steingrimsson, B.; Truesdell, A.H.; Witherspoon, P.A. (Lawrence Berkeley Lab., CA (USA); Icelandic National Energy Authority, Reykjavik (Iceland); Geological Survey, Menlo Park, CA (USA); Lawrence Berkeley Lab., CA (USA))

    1989-08-01

    These are appendices F through I of the Ahuachapan Geothermal Field Reservoir Analysis. The volume contains: well logs, water chemistry plots, gas chemistry plots, temperature plots, and flow plots. (JEF)

  5. Symposium in the field of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, Miguel; Mock, John E.

    1989-04-01

    Mexico and the US are nations with abundant sources of geothermal energy, and both countries have progressed rapidly in developing their more accessible resources. For example, Mexico has developed over 600 MWe at Cerro Prieto, while US developers have brought in over 2000 MWe at the Geysers. These successes, however, are only a prologue to an exciting future. All forms of energy face technical and economic barriers that must be overcome if the resources are to play a significant role in satisfying national energy needs. Geothermal energy--except for the very highest grade resources--face a number of barriers, which must be surmounted through research and development. Sharing a common interest in solving the problems that impede the rapid utilization of geothermal energy, Mexico and the US agreed to exchange information and participate in joint research. An excellent example of this close and continuing collaboration is the geothermal research program conducted under the auspices of the 3-year agreement signed on April 7, 1986 by the US DOE and the Mexican Comision Federal de Electricidad (CFE). The major objectives of this bilateral agreement are: (1) to achieve a thorough understanding of the nature of geothermal reservoirs in sedimentary and fractured igneous rocks; (2) to investigate how the geothermal resources of both nations can best be explored and utilized; and (3) to exchange information on geothermal topics of mutual interest.

  6. Characterization of deep ground geothermal field in Jiahe Coal Mine

    Institute of Scientific and Technical Information of China (English)

    Zhang Yi; Guo Dongming; He Manchao; Jiang Yaodong; Yang Qing

    2011-01-01

    Research into the characteristics of geothermal fields is important for the control of heat damage in mines.Based on measured geothermal data of boreholes from -200 m to -1200 m in a Jiahe Coal Mine,we demonstrate non-linear but increasing relations of both geo-temperatures and geothermal gradients with increases depth.Numerically,we fitted the relationship between geo-temperatures and depth,a first-order exponential decay curve,formulated as:T(h) - -4.975 + 23.08 × exp(-h/1736.1 ).

  7. Investigations of deep resistivity structures at the Wairakei geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Bibby, Hugh M.; Risk, George F.; Grant Caldwell, T.; Heise, Wiebke [GNS Science, P.O. Box 30368, Lower Hutt (New Zealand)

    2009-03-15

    The Wairakei geothermal field was the proving ground for the use of electrical resistivity methods for geothermal exploration. At this site it was first demonstrated that a large contrast in resistivity existed between geothermal ground and the cold surroundings. Within the top 500 m of the geothermal field, low-resistivity (5-10 {omega}m) reflects the effects of both the hot saline water in the pore spaces and the conductive rock-matrix. The first surveys at Wairakei used a Wenner array (a {proportional_to}550 m) to measure the resistivity values along tracks throughout the field; contour maps of the resistivities were used to estimate the lateral extent of the geothermal waters at a few hundred metres depth. In the late 1960s the Wenner array was superseded by the Schlumberger array (AB/2 = 500 m and 1000 m), which enabled deeper penetration and better definition of the extent of the geothermal waters. These early surveys showed that the bounds of the geothermal waters were often sharp, leading to the concept that a 'resistivity boundary' could be defined for New Zealand's liquid-dominated geothermal fields. As new methods of measuring electrical structure with greater precision became available, Wairakei was often chosen as the testing ground. In 1982, a deep penetrating tensor bipole-dipole survey was made over the northern part of the field to provide close-spaced data across the boundary, leading to a better definition of the boundary and its change with depth. A similar survey over the eastern edge of the field revealed a very sharp boundary with an apparent correlation between its location and a deeper caldera structure. The first application of tensor time-domain resistivity (tensor LOTEM) was made across the north-western edge of Wairakei in 1997 giving both a detailed image of the boundary and showing that it was possible to trace geological structures within the geothermal field. The most commonly used method for resistivity surveying in

  8. Structural Controls of the Tuscarora Geothermal Field, Elko County, Nevada

    Science.gov (United States)

    Dering, Gregory M.

    Detailed geologic mapping, structural analysis, and well data have been integrated to elucidate the stratigraphic framework and structural setting of the Tuscarora geothermal area. Tuscarora is an amagmatic geothermal system that lies in the northern part of the Basin and Range province, ˜15 km southeast of the Snake River Plain and ˜90 km northwest of Elko, Nevada. The Tuscarora area is dominated by late Eocene to middle Miocene volcanic and sedimentary rocks, all overlying Paleozoic metasedimentary rocks. A geothermal power plant was constructed in 2011 and currently produces 18 MWe from an ˜170°C reservoir in metasedimentary rocks at a depth of 1740 m. Analysis of drill core reveals that the subsurface geology is dominated to depths of ˜700-1000 m by intracaldera deposits of the Eocene Big Cottonwood Canyon caldera, including blocks of basement-derived megabreccia. Furthermore, the Tertiary-Paleozoic nonconformity within the geothermal field has been recognized as the margin of this Eocene caldera. Structural relations combined with geochronologic data from previous studies indicate that Tuscarora has undergone extension since the late Eocene, with significant extension in the late Miocene-Pliocene to early Pleistocene. Kinematic analysis of fault slip data reveal an east-west-trending least principal paleostress direction, which probably reflects an earlier episode of Miocene extension. Two distinct structural settings at different scales appear to control the geothermal field. The regional structural setting is a 10-km wide complexly faulted left step or relay ramp in the west-dipping range-bounding Independence-Bull Run Mountains normal fault system. Geothermal activity occurs within the step-over where sets of east- and west-dipping normal faults overlap in a northerly trending accommodation zone. The distribution of hot wells and hydrothermal surface features, including boiling springs, fumaroles, and siliceous sinter, indicate that the geothermal

  9. Paleotemperature analysis of Aliaga (Izmir, Turkey) geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Sengueler, I.; Sener, M.; Koek, M.V.

    2000-05-01

    Mineralogical and organopetrographic analysis were carried out on core samples of four geothermal wells from the Aliaga geothermal field located in western Turkey. Whole rock mineralogy and clay minerals were determined, and thermal maturity of the different levels of the formation was defined by means of vitrinite reflectance measurements. The measured maturity gradients compiled from analytical data for four wells and outcrops ranged from low to very high values.

  10. Paleotemperature analysis of Aliaga (Izmir, Turkey) geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Senguler, I.; Sener, M.; Kok, M.V.

    2000-04-01

    Mineralogical and organopetrographic analysis were carried out on core samples of four geothermal wells from the Aliaga geothermal field located in western Turkey. Whole rock mineralogy and clay minerals were determined, and thermal maturity of the different levels of the formation was defined by means of vitrinite reflectance measurements. The measured maturity gradients compiled from analytical data for four wells and outcrops ranged from low to very high values. (author)

  11. Geothermal reservoir at Tatapani Geothermal field, Surguja district, Madhya Pradesh, IN

    Energy Technology Data Exchange (ETDEWEB)

    Pitale, U.L.; Sarolkar, P.B.; Rawat, H.S.; Shukia, S.N.

    1996-01-24

    The Tatapani Geothermal field, located on the Son-Narmada mega lineament is one of the most intense geothermal manifestation, with hot spring temperature of 98°c. in Central India. 21 Exploratory and thermal gradient boreholes followed by 5 production wells for proposed 300 KWe binary cycle power plant, have revealed specific reservoir parameters of shallow geothermal reservoir of 110°c in upper 350 m of geothermal system and their possible continuation to deeper reservoir of anticipated temperature of 160 ± 10°c. Testing of five production wells done by Oil and Natural Gas Corporation concurrently with drilling at different depths and also on completion of drilling, have established feeder zones of thermal water at depth of 175-200 m, 280-300 m, maximum temperature of 112.5°c and bottom hole pressure of 42 kg/cm². Further interpretation of temperature and pressure profiles, injection test, well head discharges and chemical analysis data has revealed thermal characteristics of individual production wells and overall configuration of .thermal production zones with their permeability, temperature, and discharge characteristics in the shallow thermal reservoir area. Well testing data and interpretation of reservoir parameters therefrom, for upper 350 m part of geothermal system and possible model of deeper geothermal reservoir at Tatapani have been presented in the paper.

  12. Geothermal Reservoir Well Stimulation Project: reservoir selection task

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    The Geothermal Reservoir Well Stimulation Project has prepared a two-year program to develop and field test methods of stimulating geothermal wells. The program provides for six field experiments which progress in difficulty from low temperature reservoirs using current technology to high temperature reservoirs using advanced types of stimulation treatments. The process used to select the six field experiment locations and stimulation treatments is described. Tentatively, the following reservoirs are proposed: Raft River, East Mesa, Baca and Westmorland (two experiments), and Brawley and The Geysers or Roosevelt Hot Springs (two experiments). The program will be reviewed after each field treatment to select a specific well candidate for the next experiment and to determine whether alteration of the sequence will be beneficial to the overall success of the project and the geothermal industry.

  13. Tracers technique development in geothermal and oil fields in Indonesia

    International Nuclear Information System (INIS)

    Indonesia is one of the oil countries that have more than 40 % of the world's geothermal reserves. Geothermal development has amounted to 807 MW including several fields (Kamojang, dieng salak, Wayang windu, Darajat Sibayak and lahendong) from 20,000 MW reserves. In several locations in Sumatra there are many oil fields under secondary production. At present, they are starting to exploit possibilities using EOR technology. Tracer technology is an alternative to determine interconnection between wells and mass recovery for steam or oil management. Tracer return in wells production could be used to calculate optimization of water re-injection and various useful parameters including swept volume between well pairs. Some radiotracers like tritiated water HTO, iodide as 125I- (or 131I- in some cases) and cobalthexacyanide as for instance 60Co(CN)63- could be considered as suitable tracers for reservoir systems. HTO will be injected into geothermal reservoirs under different conditions: Vapour dominated (Kamojang) and two phase systems (Lahendong). Radiotracers of iodide will be injected to the liquid dominated system of the geothermal field (Salak). Also HTO and radiolabelled Co(CN)63- will be injected simultaneously in an oilfield under secondary recovery. Data interpretation using userfriendly software (Iceboc, etc.) will give maximum technology contribution to geothermal fluids and oil field management

  14. Stable isotope study in geothermal fields in Kamojang and Dieng, Java Island

    International Nuclear Information System (INIS)

    A survey of the stable isotope composition of geothermal sources was initiated at several geothermal fields on the island of Java during 1988-1990. A further study was carried out in two geothermal fields, Kamojang and Dieng, which was approximately 400 km apart. The study was intended to provide an isotope database to monitor geothermal evolution resulting from exploitation and to identify the recharge area of the geothermal system. 1 fig

  15. Some comments on the La Primavera geothermal field, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez A, B.; Lippmann, M.J.

    1983-12-01

    The La Primavera geothermal field is located about 20 km west of the city of Guadalajara, Jalisco, in the western part of the Mexican Neovolcanic Axis. Initial results of five deep exploration wells (down to 2000 m depth) were very promising; measured downhole temperatures exceed 300/sup 0/C. During production, however, downhole temperatures dropped, and the chemistry of the fluids changed. The analysis of geologic, mineralogic, geochemical, and well completion data indicate that colder fluids flow down the wellbore from shallower aquifers cooling the upper zones of the geothermal reservoir. This problem is attributed to inadequate well completions. Doubts have arisen about continuing the exploration of the field because of the somewhat disappointing drilling results. However, a more thorough analysis of all available data indicates that a good geothermal prospect might exist below 3000 m, and that it could be successfully developed with appropriately located and completed wells.

  16. Geothermal Reservoir Characterization for Steam Field Management in Kamojang Geothermal Field-West Java

    Directory of Open Access Journals (Sweden)

    Z. Abidin

    2009-01-01

    Full Text Available Kamojang is the first geothermal field in Indonesia with a vapor dominated system reservoir. Kamojang has been exploited for over 20 years producing about 1100 tons/hour of steam which is equivalent to 140 Mwe electricity energy. This research is aimed to study the reservoir character after 20 years of exploitation and to investigate the effect of reinjection as a artificial recharge for steam input in the future and also the nature of secondary processes in the reservoir using isotope geochemistry tools. The research is conducted by natural isotopes (18O, 2H and 3H analysis of many sources of water (meteoric, cold spring, fumaroles and shallow groundwater in the surrounding of Kamojang field and also fluid reservoir to establish fluid reservoir origins and isotopic composition. Gas analysis and isotopes monitoring on the 25 production wells have been conducted every 2-3 years intervals for more than 10 years to investigate the effect of exploitation to the reservoir performance. Tritium radiotracer test with 370 GBq (10 Ci activity was conducted at the KMJ 15 reinjection well to determine qualitatively and quantitatively the flow of reinjection water to its surrounding producing well (KMJ 11, 14, 17, 18, 26, 17 and 30. Data interpretation and evaluation to determine reinjection water mass recovery and cooling prediction modeling were conducted using ICEBOX program package (TRINV and TRCOOL. Interpretation and evaluation of data concluded that reservoir fluid of Kamojang geothermal field was originated from meteoric water which infiltrated through fault structures at elevation of 1350 m –1650 m above sea level. There is no evidence that the fluid was originated from magmatic water. Reservoir fluid moved both laterally and vertically (deep fluid with lateral fluid movement from west to the east. The isotope data analysis indicated there is water entry in west-northwest reservoir boundary. Water entry gradually moved from northwest to the

  17. Geothermal Reservoir Characterization For Steam Field Management In Kamojang Geothermal Field-West Java

    International Nuclear Information System (INIS)

    Kamojang is the first geothermal field in Indonesia with a vapor dominated system reservoir. Kamojang has been exploited for over 20 years producing about 1100 tons/hour of steam which is equivalent to 140 Mwe electricity energy. This research is aimed to study the reservoir character after 20 years of exploitation and to investigate the effect of reinjection as a artificial recharge for steam input in the future and also the nature of secondary processes in the reservoir using isotope geochemistry tools. The research is conducted by natural isotopes (18O, 2H and 3H) analysis of many sources of water (meteoric, cold spring, fumaroles and shallow groundwater) in the surrounding of Kamojang field and also fluid reservoir to establish fluid reservoir origins and isotopic composition. Gas analysis and isotopes monitoring on the 25 production wells have been conducted every 2-3 years intervals for more than 10 years to investigate the effect of exploitation to the reservoir performance. Tritium radiotracer test with 370 GBq (10 Ci) activity was conducted at the KMJ 15 reinjection well to determine qualitatively and quantitatively the flow of reinjection water to its surrounding producing well (KMJ 11, 14, 17, 18, 26, 17 and 30). Data interpretation and evaluation to determine reinjection water mass recovery and cooling prediction modeling were conducted using ICEBOX program package (TRINV and TRCOOL). Interpretation and evaluation of data concluded that reservoir fluid of Kamojang geothermal field was originated from meteoric water which infiltrated through fault structures at elevation of 1350 m -1650 m above sea level. There is no evidence that the fluid was originated from magmatic water. Reservoir fluid moved both laterally and vertically (deep fluid) with lateral fluid movement from west to the east. The isotope data analysis indicated there is water entry in west-northwest reservoir boundary. Water entry gradually moved from northwest to the southeast (through

  18. The Hydrogeochemistry of Qingshui Geothermal Field, Northeastern Taiwan.

    Science.gov (United States)

    Yu-Wen, Chen; Cheng-Kuo, Lin; Wayne, Lin; Yu-Te, Chang; Pei-Shan, Hsieh

    2015-04-01

    The Qingshui geothermal field is located at the upstream valley of Lanyang Creek, northeastern Taiwan. It is renowned as a geothermal field. The previous studies demonstrated a higher geothermal gradient, 100oC/km warmer than a normal geotherm. However, Qingshui geothermal field has not been well developed due to the higher mining costs. In the recent years, the Taiwan government has been focusing on developing alternative and renewable energy and initiated a 10 year project, Nation Energy Program. This study is part of this project In general, it is very difficult to collect deep downhole samples without considerable change of hydro- and gas- chemistry of water under high temperature and pressure. A new sampling tool, GTF Sampler, was designed by the research team, Green Energy and Environment Laboratories, Industrial Technology Research Institute. This tool can simultaneously collect high quality geothermal water and gas sample and moreover, the sampling depth can reach up to 800 meters. Accordingly, a more accurate measurements can be conducted in the laboratory. In this study, 10 geothermal samples were collected and measured. The results demonstrate that geothermal water samples are characterized with Na(K)-HCO3 water type and located at the mature water area in Giggenbach Na-K-Mg diagram. Several geothermometers, including silica and cation geothermometry, were used to estimate potential temperature in the geothermal reservoir systems. In general, the geothermoters of Na-K and Na-K-Ca obtain reservoir temperatures between 120-190oC and 130-210oC, respectively, but the silica geothermometer indicates a lower reservoir temperature between 90 and 170oC. There is no big difference among them. It is worth to note that all calculated temperatures are lower than those of in-situ downhole measurements; therefore, more detailed and advanced researches would be needed for the inconsistency. To examine the argument about igneous heat source in the previous studies, rare

  19. Radon studies for extending Los Azufres geothermal energy field in Mexico

    International Nuclear Information System (INIS)

    Los Azufres is a 98 MW producing geothermal energy field situated in the Mexican volcanic belt at the west part of the country. Recently, hydrothermal activity and geochemical analysis of geothermal fluids from the north part of the geothermal field gave indications of a possible geothermal-production area, similar to the already producing field. In order to investigate the activity of geological structures, which are considered the means of geothermal fluids transporters, radon mapping was carried out using sets of 240 LR-115 detectors in the area of interest. Radon values higher than 10 kBq m-3 were considered anomalous and indicative of geothermal anomalies

  20. Radon studies for extending Los Azufres geothermal energy field in Mexico

    CERN Document Server

    Tavera, L; Camacho, M E; Chavez, A; Pérez, H; Gómez, J

    1999-01-01

    Los Azufres is a 98 MW producing geothermal energy field situated in the Mexican volcanic belt at the west part of the country. Recently, hydrothermal activity and geochemical analysis of geothermal fluids from the north part of the geothermal field gave indications of a possible geothermal-production area, similar to the already producing field. In order to investigate the activity of geological structures, which are considered the means of geothermal fluids transporters, radon mapping was carried out using sets of 240 LR-115 detectors in the area of interest. Radon values higher than 10 kBq m sup - sup 3 were considered anomalous and indicative of geothermal anomalies.

  1. DC resistivity at the Ahuachapan geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Fink, J.B.; de la Fuente D., M.; Rodriquez, C.; Cash, D.J.; Gerety, M.

    1988-01-01

    Deep dc resistivity surveying has been performed at the Ahuachapan Geothermal Field in western El Salvador. The field lies on the north base if the volcanic range that runs the length of the country and is the site of a significant active geothermal powerplant. The technical purpose of the surveying was to assess the geophysical properties of the geothermal regime around the existing field. The survey was carried out as a colinear dipole-dipole survey using dipole spacings of 500m and 1000m, and dipole separations of up to fourteen dipole lengths. Results included (1) the observation that the geothermal reservoir was not readily detectable due to surface lithologic changes and extensive cultural effects, (2) the hydrothermally altered areas are readily recognized by their low resistivities, (3) local lithologies appear to be mappable based on their in situ resistivities, (4) the greater field logistical convenience of the shorter 500m dipole spacings is negated by the increase in topographic effects, and (5) if appropriate dipole separations are used, there is no need to run surveys of both 500 and 1000 meter dipole spacings to gather shallow and deep information. 7 figs.

  2. Temperature distribution in the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Castillo B, F.; Bermejo M, F.J.; Domiguez A, B.; Esquer P, C.A.; Navarro O, F.J.

    1981-01-01

    A series of temperature and pressure logs and flow rate measurements was compiled for each of the geothermal wells drilled to different reservoir depths between October 1979 and December 1980. Based on the valuable information obtained, a series of graphs showing the thermal characteristics of the reservoir were prepared. These graphs clearly show the temperature distribution resulting from the movement of fluids from the deep regions toward the higher zones of the reservoir, thus establishing more reliable parameters for locating new wells with better production zones. Updated information based on data from new deep wells drilled in the geothermal field is presented here. This new information does not differ much from earlier estimates and theories. However, the influence of faulting and fracturing on the hydrothermal recharge of the geothermal reservoir is seen more clearly.

  3. A Reservoir Assessment of the Geysers Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Richard P.; Chapman, Rodger H.; Dykstra, Herman; Stockton, A.D.

    1981-01-01

    Big Sulphur Creek fault zone, in The Geysers Geothermal field, may be part of a deep-seated, wrench-style fault system. Hydrothermal fluid reservoir may rise through conduits beneath the five main anomalies associated with the Big Sulphur Creek wrench trend. Upon moderately dipping, fracture network. Condensed steam at the steep reservoir flank drains back to the hot water table. These flanks are defined roughly by marginally-producing geothermal wells. Field extensions are expected to be on the southeast and northwest. Some geophysical anomalies (electrical resistivity and audio-magnetotelluric) evidently are caused by the hot water geothermal field or zones of altered rocks; others (gravity, P-wave delays, and possibly electrical resistivity) probably represent the underlying heat source, a possible magma chamber; and others (microearthquake activity) may be related to the steam reservoir. A large negative gravity anomaly and a few low-resitivity anomalies suggest areas generally favorable for the presence of steam zones, but these anomalies apparently do not directly indicate the known steam reservoir. Monitoring gravity and geodetic changes with time and mapping microearthquake activity are methods that show promise for determining reservoir size, possible recharge, production lifetime, and other characteristics of the known stream field. Seismic reflection data may contribute to the efficient exploitation of the field by identifying fracture zones that serve as conduits for the steam. (DJE-2005)

  4. Some Comments on the La Primavera Geothermal Field, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    A., Bernardo Dominguez; Lippmann, Marcelo J.

    1983-12-15

    The La Primavera geothermal field is located about 20 km west of the city of Guadalajara, Jalisco, in the western part of the Mexican Neovolcanic Axis. Initial results of five deep exploration wells (down to 2000 m depth) were very promising; measured downhole temperatures exceed 300{degrees}C. During production, however, downhole temperatures dropped, and the chemistry of the fluids changed. The analysis of geologic, mineralogic, geochemical, and well completion data indicate that colder fluids flow down the wellbore from shallower aqifers cooling the upper zones of the gothermal reservoir. This problem is attributed to inadequate well completions. Doubts have arisen about continuing the exploration of the field because of the somewhat disappointing drilling results. However, a more thorough analysis of all available data indicates that a good geothermal prospect might exist below 3000 m, and that it could be successfully developed with appropriately located and completed wells.

  5. Development case histories: Tongonan and Palinpinon geothermal fields, Philippines

    International Nuclear Information System (INIS)

    The background on the general scenario of energy resource development in the country is described. Highlights of the exploration history of the Tongonan and Palinpinon geothermal fields in the Philippines are then presented. This is discussed in conjunction with the strategies and policies taken in the development of each field. Finally, the common policies and contrasting development strategies are compared and evaluated. The conclusion derived is that the development strategy decisions at Tongonan are influenced by the regional power demand, topography, and the large extent of the resource. In contrast, the development at Palinpinon is less constrained by the external influence of regional power needs, but, instead, is significantly dominated by the limitations imposed by the rugged terrain and the physical characteristics of the resource area. Such comparison demonstrates the site-specific nature of geothermal development. (auth.). 8 figs.; 2 refs

  6. Mathematical aspects of stress field simulations in deep geothermal reservoirs

    OpenAIRE

    Augustin, Matthias

    2011-01-01

    This report gives an insight into basics of stress field simulations for geothermal reservoirs. The quasistatic equations of poroelasticity are deduced from constitutive equations, balance of mass and balance of momentum. Existence and uniqueness of a weak solution is shown. In order of to find an approximate solution numerically, usage of the so–called method of fundamental solutions is a promising way. The idea of this method as well as a sketch of how convergence may be prov...

  7. The Geysers Geothermal Field Update1990/2010

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, P.; Lippmann, M.; Dobson, P.F.; Poux, B.

    2010-10-01

    In this report, we have presented data in four sections: (1) THE GEYSERS HISTORICAL UPDATE 1990-2010 - A historical update of the primary developments at The Geysers between 1990 and 2010 which uses as its start point Section IIA of the Monograph - 'Historical Setting and History of Development' that included articles by James Koenig and Susan Hodgson. (2) THE GEYSERS COMPREHENSIVE REFERENCE LIST 1990-2010 - In this section we present a rather complete list of technical articles and technical related to The Geysers that were issued during the period 1990-2010. The list was compiled from many sources including, but not limited to scientific journals and conference proceedings. While the list was prepared with care and considerable assistance from many geothermal colleagues, it is very possible that some papers could have been missed and we apologize to their authors in advance. The list was subdivided according to the following topics: (1) Field characterization; (2) Drilling; (3) Field development and management; (4) Induced seismicity; (5) Enhanced Geothermal Systems; (6) Power production and related issues; (7) Environment-related issues; and (8) Other topics. (3) GRC 2010 ANNUAL MEETING GEYSERS PAPERS - Included in this section are the papers presented at the GRC 2010 Annual Meeting that relate to The Geysers. (4) ADDITIONAL GEYSERS PAPERS 1990-2010 - Eighteen additional technical papers were included in this publication in order to give a broad background to the development at The Geysers after 1990. The articles issued during the 1990-2010 period were selected by colleagues considered knowledgeable in their areas of expertise. We forwarded the list of references given in Section 2 to them asking to send us with their selections with a preference, because of limited time, to focus on those papers that would not require lengthy copyright approval. We then chose the articles presented in this section with the purpose of providing the broadest possible

  8. Interstratified Illite/Montmorillonite in Kamojang Geothermal Field, Indonesia

    Directory of Open Access Journals (Sweden)

    D. F. Yudiantoro

    2014-07-01

    Full Text Available DOI: 10.17014/ijog.v8i4.167Kamojang geothermal field located in West Java Province, falls under the Pangkalan Subregency, Bandung Regency. The researched area is a geothermal field located in the Quaternary volcanic caldera system of about 0.452 to 1.2 Ma. The volcanic activity generated hydrothermal fluids, interacting with rocks producing mineral alteration. The minerals formed in the areas of research are interstratified illite/montmorillonite (I/M. Analyses to identify interstratified I/M have been performed by X-ray diffraction using ethylene glycol, while the determination of the type and percentage of interstratified I/M was based on the calculation method of Watanabe. The methodology was applied on core and cutting samples from Wells KMJ-8, 9, 11, 13, 16, 23, 49, 51, and 54. The result of analysis of the samples shows that the type of clay is interstratified illite/montmorillonite and the minerals are formed at temperatures ranging from 180 to 220° C. The type of interstratified I/M in the studied area is S = 0 and S = 1. The percentage of illite type S = 0 is between 20 - 35% illite, whereas type S = 1 has about 45 - 72% illite. Along with the increasing depth, the percentage of illite is getting greater. This is consistent with the vertical distribution of temperature which increases according to the depth. This correlation results in an interpretation that the upflow zone of the geothermal reservoir is located in the centre of the Kamojang geothermal field.

  9. Radon as a guide to geothermal exploration. The case of Chipilapa geothermal field in El Salvador

    International Nuclear Information System (INIS)

    During the months September 1990 until January 1991 was realized in Chipilapa Geothermal field a Radon study utilizing nitrocelullose films as detector. The concentration of average Radon obtained was 125 pCi/l with a standard deviation of 51. As natural background of Radon concentration in the study area was establish a value of 50 pCi/l so it permitted to determine as an anomaly those ones concentrations upper than 100 pCi/l. The obtained results show interest zone the central and southwest of Chipilapa area, so also at east of Cuyanausul fault and along Agua Shuca fault. (Author)

  10. Drilling of geothermal well in Onikobe geothermal field and developping Oguni geothermal field. Onikobe oyobi Oguni chiiki ni okeru chinetsusei kussaku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Abe, S.; Kurishima, S. (Electric Power Development Co. Ltd., Tokyo (Japan)); Mezaki, Y.

    1992-03-25

    This paper describes the Onikobe Geothermal Power Plant in Miyagi Prefecture developed by the Electric Power Source Development Co., Ltd., and the current development state of drilling geothermal wells at the Oguni geothermal field in Kumamoto Prefecture. The Onikobe area has alteration zone distributed widely, with a clayey layer at a depth between 80 m and 150 m, and steam reservoir layers at depths around 300 m and deeper than 800 m. The production wells in shallow layers were drilled with great attentions because the layer down to about 300 m, which is a steam layer, has an extremely high underground temperature rise rate and incessant danger of spontaneous explosions. Drilling deep slanted wells used an increased number of casing pipes. The slanted drilling has dealt with the high temperatures starting at shallow depths by beginning the hole bending at a depth as unexceptionally shallow as 80 meters. The Oguni area presented no special problems in geothermal well drilling. However, because of employing a base system in which excavation locations are limited as a result of highly undulated topography and road conditions, almost all wells were drilled slanted. 21 refs., 8 figs., 13 tabs.

  11. Optimization of Electrical Power Production from High Temperature Geothermal Fields with respect to Silica Scaling Problems

    OpenAIRE

    Nugroho, Andi Joko, 1977-

    2011-01-01

    Silica scaling is an obstacle in the use of geothermal fluid from high temperature fields. The potential issue of silica deposition rises with increasing resource temperature. A single flash condensing system is the most common energy conversion system for utilizing geothermal fluid from high temperature fields, mainly due to its smallest possibility of silica precipitation. This thesis investigates the possibility of optimizing the employment of geothermal fluid from high temperature fields ...

  12. Hydrothermal surface alteration in the Copahue Geothermal Field (Argentina)

    Energy Technology Data Exchange (ETDEWEB)

    Mas, Graciela R.; Mas, Luis C.; Bengochea, Leandro

    1996-01-24

    In the area of the Copahue Geothermal Field, there are five active geothermal manifestations, which mainly consist of fumaroles, hot springs and mud pots. Four of these manifestations are located in Argentina: Las Máquinas, Termas de Copahue, Las Maquinitas and El Anfiteatro, and the fifth on the Chilean side: Chancho Co. All of them present a strong acid sulfate country rock alteration, characterized by the assemblage alunite + kaolinite + quartz + cristobalite + pyrite + sulfur + jarosite, as the result of the base leaching by fluids concentrated in H2SO4 by atmospheric oxidation at the water table in a steam heated environment of H2S released by deeper boiling fluids. Another alteration zone in this area, called COP-2, is a fossil geothermal manifestation which shows characteristics of neutral to alkaline alteration represented mainly by the siliceous sinter superimposed over the acid alteration. The mineralogy and zoning of these alteration zones, and their relation with the hidrothermal solutions and the major structures of the area are analized.

  13. Fracture Characterization in the Astor Pass Geothermal Field, Nevada

    Science.gov (United States)

    Walsh, D. C.; Reeves, D. M.; Pohll, G.; Lyles, B. F.; Cooper, C. A.

    2011-12-01

    The Astor Pass geothermal field, near Pyramid Lake, NV, is under study as a site of potential geothermal energy production. Three wells have been completed in the graben of this typical Basin and Range geologic setting. Lithologies include a layer of unconsolidated sediment (basin fill) underlain by various tertiary volcanic units and granodiorite and metavolcanic basement rock. Characterization of fractures within the relatively impermeable rock matrix is being conducted for the three wells. Statistical analysis of fracture orientation, densities, and spacing obtained from borehole imaging logs is used to determine stress orientation and to generate a statistically equivalent Discrete Fracture Network (DFN) model. Fractures at depth are compared to fracture data collected in nearby outcrops of the same lithologic stratigraphy. Fracture geometry and density is correlated to mechanically discrete layers within the stratigraphy to test whether variations in fracturing can be attributed to variations in Young's modulus. Correlation of fracture geometry and densities with spinner flowmeter logs and distributed temperature sensor records are made in an effort to identify potential flowing fracture zones intersecting the borehole. Mean fracture aperture is obtained from open fracture counts and reservoir-scale transmissivity values (computed from a 30 day pump test) in the absence of readily available aperture data. The goal of this thorough fracture characterization is to create a physically relevant model which may be coupled with a multipurpose fluid flow and thermal simulator for investigation of geothermal reservoir behavior, particularly at the borehole scale.

  14. A database for The Geysers geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Bodvarsson, G.S.; Cox, B.L.; Fuller, P.; Ripperda, M.; Tulinius, H.; Witherspoon, P.A.; Goldstein, N.; Flexser, S.; Pruess, K. (Lawrence Berkeley Lab., CA (USA)); Truesdell, A. (Geological Survey, Menlo Park, CA (USA))

    1989-09-01

    In Fiscal Year 1985-1986 the Earth Sciences Division of Lawrence Berkeley Laboratory (LBL) began a multi-year project for SLC to organize and analyze the field data from The Geysers. In the first year, most of the work concentrated on the development of a comprehensive database for The Geysers, and conventional reservoir engineering analysis of the data. Essentially, all non-proprietary data for wells at The Geysers have been incorporated into the database, as well as proprietary data from wells located on State leases. In following years, a more detailed analysis of The Geysers data has been carried out. This report is a summary of the non- proprietary work performed in FY 1985--1986. It describes various aspects of the database and also includes: review sections on Field Development, Geology, Geophysics, Geochemistry and Reservoir Engineering. It should be emphasized that these background chapters were written in 1986, and therefore only summarize the information available at that time. The appendices contain individual plots of wellhead pressures, degree of superheat, steam flow rates, cumulative mass flows, injection rates and cumulative injection through 1988 for approximately 250 wells. All of the data contained in this report are non-proprietary, from State and non-State leases. The production/injection and heat flow data from the wells were obtained from the California State Division of Oil and gas (DOG) (courtesy of Dick Thomas). Most of the other data were obtained from SLC files in Sacramento (courtesy of Charles Priddy), or DOG files in Santa Rosa (courtesy of Ken Stelling). 159 refs., 23 figs., 3 tabs.

  15. Seismicity and coupled deformation modeling at the Coso Geothermal Field

    Science.gov (United States)

    Kaven, J. O.; Hickman, S. H.; Davatzes, N. C.

    2015-12-01

    Micro-seismicity in geothermal reservoirs, in particular in enhanced geothermal systems (EGS), is a beneficial byproduct of injection and production, as it can indicate the generation of high-permeability pathways on either pre-existing or newly generated faults and fractures. The hazard of inducing an earthquake large enough to be felt at the surface, however, is not easily avoided and has led to termination of some EGS projects. To explore the physical processes leading to permeability creation and maintenance in geothermal systems and the physics of induced earthquakes , we investigated the evolution of seismicity and the factors controlling the migration, moment release rate, and timing of seismicity in the Coso Geothermal Field (CGF). We report on seismicity in the CGF that has been relocated with high precision double-difference relocation techniques and simultaneous velocity inversions to understand hydrologic reservoir compartmentalization and the nature of subsurface boundaries to fluid flow. We find that two distinct compartments are present within the CGF, which are divided by an aseismic gap showing a relatively low Vp/Vs ratio, likely indicating lower temperatures or lower pore pressures within the gap than in the adjacent reservoir compartments. Well-located events with Mw> 3.5 tend to map onto reactivated fault structures that were revealed when imaged by the relocated micro-seismicity. We relate the temporal and spatial migration of moment release rate to the injection and production histories in the reservoir by employing a thermo-poro-elastic finite element model that takes into account the compartment boundaries defined by the seismicity. We find that pore pressure effects alone are not responsible for the migration of seismicity and that poro-elastic and thermo-elastic stress changes are needed in addition to fluid pressure effects to account for the observed moment release rates.

  16. Development of a geothermal resource in a fractured volcanic formation: Case study of the Sumikawa Geothermal Field, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K.; Pritchett, J.W.; Stevens, J.L.; Luu, L. [Maxwell Federal Div., Inc., San Diego, CA (United States); Combs, J. [Geo-Hills Associates, Los Altos, CA (United States)

    1996-11-01

    The principal purpose of this case study of the Sumikawa Geothermal Field is to document and to evaluate the use of drilling logs, surface and downhole geophysical measurements, chemical analyses, and pressure transient data for the assessment of a high temperature volcanic geothermal field. The work accomplished during Year 1 of this ongoing program is described in the present report. A brief overview of the Sumikawa Geothermal Field is given. The drilling information and downhole pressure, temperature, and spinner surveys are used to determine feedzone locations, pressures and temperatures. Available injection and production data from both slim holes and large-diameter wells are analyzed to evaluate injectivity/productivity indices and to investigate the variation of discharge rate with borehole diameter. Finally, plans for future work are outlined.

  17. Shear velocity of the Rotokawa geothermal field using ambient noise

    Science.gov (United States)

    Civilini, F.; Savage, M. K.; Townend, J.

    2014-12-01

    Ambient noise correlation is an increasingly popular seismological technique that uses the ambient seismic noise recorded at two stations to construct an empirical Green's function. Applications of this technique include determining shear velocity structure and attenuation. An advantage of ambient noise is that it does not rely on external sources of seismic energy such as local or teleseismic earthquakes. This method has been used in the geothermal industry to determine the depths at which magmatic processes occur, to distinguish between production and non-production areas, and to observe seismic velocity perturbations associated with fluid extraction. We will present a velocity model for the Rotokawa geothermal field near Taupo, New Zealand, produced from ambient noise cross correlations. Production at Rotokawa is based on the "Rotokawa A" combined cycle power station established in 1997 and the "Nga Awa Purua" triple flash power plant established in 2010. Rotokawa Joint Venture, a partnership between Mighty River Power and Tauhara North No. 2 Trust currently operates 174 MW of generation at Rotokawa. An array of short period seismometers was installed in 2008 and occupies an area of roughly 5 square kilometers around the site. Although both cultural and natural noise sources are recorded at the stations, the instrument separation distance provides a unique challenge for analyzing cross correlations produced by both signal types. The inter-station spacing is on the order of a few kilometers, so waves from cultural sources generally are not coherent from one station to the other, while the wavelength produced by natural noise is greater than the station separation. Velocity models produced from these two source types will be compared to known geological models of the site. Depending on the amount of data needed to adequately construct cross-correlations, a time-dependent model of velocity will be established and compared with geothermal production processes.

  18. Isotopic evaluation of the Afyon-Cobanlar-Heybeli geothermal field

    International Nuclear Information System (INIS)

    The Cobanlar (Heybeli) geothermal field is located on the Afyon - Konya highway. Nine geothermal wells, belonging to Cobanlar and Bolvadin Municipalities, as well as complexes of thermal tourism of the Bolvadin Municipality are present in the site. Temperatures vary between 41 - 56.3 degreesin the wells which have depths between 60 - 263 m. The geothermal springs discharge at temperatures of 30 - 51degrees. Stratigraphically, Paleozoic aged basement rocks consisting of fillite - muskovite, kuvars - schists and marbles are overlain by Cenozoic aged continental sediments and Quaterniary aged slope deposits and alluviums. Dominant tectonical strike is NE - SW and NW - SE. According to the wells drilled in the region, the Karahasan Karbonates, expressed by crystallized limestones and marbles, seem to be the production zone for the goethermal fluid. This unit also signifies the reservoir. The Cenozoic aged sediments behave as the cap rock of the reservoir. The limestones of these continental sediments discharge groundwater to the wells drilled in the area. The volcanics, located in the area, are thought to be the probable heater of the geothermal system. Shallow groundwater mainly shows a plain - ward flow. The hydraulic gradient of the flow rate is at an average of 0.75 and 0.002 in high and slow slopes respectively. Rainfalls on the karstic area of Kurucuoba village, karstic structures and fracture zones of the Sultandag and Kizildag, form the principle recharge element of the shallow groundwaters. The Yesilcay Thermal presents Na - K - CO3 - HCO3 type water, while the J-04 well presents a Ca - Mg - CO3 - HCO3 type water. According to the Schoeller diagramme, the Yesilcay spring shows Na+K dominancy, while as other springs show Ca enrichment. Even though the springs recharge from similar areas, the hydrochemical evaluation has shown different circulations from varying lithologies. Most of the stable isotopes are located over the GML (Global Meteoric Line). Evaluation

  19. Geothermal injection treatment: process chemistry, field experiences, and design options

    Energy Technology Data Exchange (ETDEWEB)

    Kindle, C.H.; Mercer, B.W.; Elmore, R.P.; Blair, S.C.; Myers, D.A.

    1984-09-01

    The successful development of geothermal reservoirs to generate electric power will require the injection disposal of approximately 700,000 gal/h (2.6 x 10/sup 6/ 1/h) of heat-depleted brine for every 50,000 kW of generating capacity. To maintain injectability, the spent brine must be compatible with the receiving formation. The factors that influence this brine/formation compatibility and tests to quantify them are discussed in this report. Some form of treatment will be necessary prior to injection for most situations; the process chemistry involved to avoid and/or accelerate the formation of precipitate particles is also discussed. The treatment processes, either avoidance or controlled precipitation approaches, are described in terms of their principles and demonstrated applications in the geothermal field and, when such experience is limited, in other industrial use. Monitoring techniques for tracking particulate growth, the effect of process parameters on corrosion and well injectability are presented. Examples of brine injection, preinjection treatment, and recovery from injectivity loss are examined and related to the aspects listed above.

  20. The Impact of Injection on Seismicity at The Geyses, California Geothermal Field

    OpenAIRE

    Majer, Ernest L.; Peterson, John E.

    2008-01-01

    Water injection into geothermal systems has often become a required strategy to extended and sustain production of geothermal resources. To reduce a trend of declining pressures and increasing non-condensable gas concentrations in steam produced from The Geysers, operators have been injecting steam condensate, local rain and stream waters, and most recently treated wastewater piped to the field from neighboring communities. If geothermal energy is to provide a significant increase in ene...

  1. Results of investigation at the Ahuachapan Geothermal Field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Fink, J.B. (HydroGeophysics, Tucson, AZ (United States))

    1990-04-01

    The Ahuachapan Geothermal Field (AGF) is a 95 megawatt geothemal-sourced power-plant operated by the Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) of El Salvador. During the past decade, as part of an effort to increase in situ thermal reserves in order to realize the full generation capacity of the AGF, extensive surface geophysical coverage has been obtained over the AGF and the prospective Chipilapa area to the east. The geophysical surveys were performed to determine physical property characteristics of the known reservoir and then to search for similar characteristics in the Chipilapa area. A secondary objective was to evaluate the surface recharge area in the highlands to the south of the AGF. The principal surface electrical geophysical methods used during this period were DC resistivity and magnetotellurics. Three available data sets have been reinterpreted using drillhole control to help form geophysical models of the area. The geophysical models are compared with the geologic interpretations.

  2. A reservoir engineering assessment of the San Jacinto-Tizate Geothermal Field, Nicaragua

    Energy Technology Data Exchange (ETDEWEB)

    Ostapenko, S.; Spektor, S.; Davila, H.; Porras, E.; Perez, M.

    1996-01-24

    More than twenty yews have passed since geothermal research and drilling took place at the geothermal fields in Nicaragua- Tbe well horn Momotombo Geothermal Field (70 We) has been generating electricity since 1983, and now a new geothermal field is under exploration. the San Jacinto-Tizate. Two reservoirs hydraulic connected were found. The shallow reservoir (270°C) at the depth of 550 - 1200 meters, and the deep one at > 1600 meters. Both of theme are water dominated reservoirs, although a two phase condition exist in the upper part of the shallow one. Different transient tests and a multi-well interference test have been carried out, very high transmissivity value were estimated around the well SJ-4 and average values for the others. A preliminar conceptual model of the geothermal system is given in this paper, as the result of the geology, geophysics, hydrology studies, drilling and reservoir evaluation.

  3. The Ahuachapan geothermal field, El Salvador: Reservoir analysis

    Energy Technology Data Exchange (ETDEWEB)

    Aunzo, Z.; Bodvarsson, G.S.; Laky, C.; Lippmann, M.J.; Steingrimsson, B.; Truesdell, A.H.; Witherspoon, P.A. (Lawrence Berkeley Lab., CA (USA); Icelandic National Energy Authority, Reykjavik (Iceland); Geological Survey, Menlo Park, CA (USA); Lawrence Berkeley Lab., CA (USA))

    1989-08-01

    The Earth Sciences Division of Lawrence Berkeley Laboratory (LBL) is conducting a reservoir evaluation study of the Ahuachapan geothermal field in El Salvador. This work is being performed in cooperation with the Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) and the Los Alamos National Laboratory (LANL). This report describes the work done during the first year of the study (FY 1988--89), and includes the (1) development of geological and conceptual models of the field, (2) evaluation of the initial thermodynamic and chemical conditions and their changes during exploitation, (3) evaluation of interference test data and the observed reservoir pressure decline, and (4) the development of a natural state model for the field. The geological model of the field indicates that there are seven (7) major and five (5) minor faults that control the fluid movement in the Ahuachapan area. Some of the faults act as a barrier to flow as indicated by large temperature declines towards the north and west. Other faults act as preferential pathways to flow. The Ahuachapan Andesites provide good horizontal permeability to flow and provide most of the fluids to the wells. The underlying Older Agglomerates also contribute to well production, but considerably less than the Andesites. 84 refs.

  4. Modeling study of the Pauzhetsky geothermal field, Kamchatka, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Kiryukhin, A.V. [Institute of Volcanology, Kamchatsky (Russian Federation); Yampolsky, V.A. [Kamchatskburgeotermia State Enterprise, Elizovo (Russian Federation)

    2004-08-01

    Exploitation of the Pauzhetsky geothermal field started in 1966 with a 5 MW{sub e} power plant. A hydrogeological model of the Pauzhetsky field has been developed based on an integrated analysis of data on lithological units, temperature, pressure, production zones and natural discharge distributions. A one-layer 'well by well' model with specified vertical heat and mass exchange conditions has been used to represent the main features of the production reservoir. Numerical model development was based on the TOUGH2 code [Pruess, 1991. TOUGH2 - A General Purpose Numerical Simulator for Multiphase Fluid and Heat Flow, Lawrence Berkeley National Laboratory Report, Berkeley, CA; Pruess et al., 1999. TOUGH2 User's Guide, Version 2.0, Report LBNL-43134, Lawrence Berkeley National Laboratory, Berkeley, CA] coupled with tables generated by the HOLA wellbore simulator [Aunzo et al., 1991. Wellbore Models GWELL, GWNACL, and HOLA, Users Guide, Draft, 81 pp.]. Lahey Fortran-90 compiler and computer graphical packages (Didger-3, Surfer-8, Grapher-3) were also used to model the development process. The modeling study of the natural-state conditions was targeted on a temperature distribution match to estimate the natural high-temperature upflow parameters: the mass flow-rate was estimated at 220 kg/s with enthalpy of 830-920 kJ/kg. The modeling study for the 1964-2000 exploitation period of the Pauzhetsky geothermal field was targeted at matching the transient reservoir pressure and flowing enthalpies of the production wells. The modeling study of exploitation confirmed that 'double porosity' in the reservoir, with a 10-20% active volume of 'fractures', and a thermo-mechanical response to reinjection (including changes in porosity due to compressibility and expansivity), were the key parameters of the model. The calibrated model of the Pauzhetsky geothermal field was used to forecast reservoir behavior under different exploitation scenarios for

  5. Geothermal Energy

    International Nuclear Information System (INIS)

    A general overview of geothermal energy is given that includes a short description of the active and stable areas in the world. The possibilities of geothermal development in Argentina are analyzed taking into account the geothermal fields of the country. The environmental benefits of geothermal energy are outlined

  6. Innovative approach for risk assessment in green field geothermal project

    NARCIS (Netherlands)

    Batini, F.; Wees, J.-D. van

    2010-01-01

    At present, the worldwide geothermal energy production provides less than 1% of the world's energy needs but the geothermal resources confined in the first 6 km of the earth's crust are estimated to be in the fairly above 200 GW of which 50-80 GW are located in Europe. Exploring and developing at la

  7. 3D Magnetotelluic characterization of the Coso GeothermalField

    Energy Technology Data Exchange (ETDEWEB)

    Newman, Gregory A.; Hoversten, G. Michael; Wannamaker, Philip E.; Gasperikova, Erika

    2007-04-23

    Electrical resistivity may contribute to progress inunderstanding geothermal systems by imaging the geometry, bounds andcontrolling structures in existing production, and thereby perhapssuggesting new areas for field expansion. To these ends, a dense grid ofmagnetotelluric (MT) stations plus a single line of contiguous bipolearray profiling has been acquired over the east flank of the Cosogeothermal system. Acquiring good quality MT data in producing geothermalsystems is a challenge due to production related electromagnetic (EM)noise and, in the case of Coso, due to proximity of a regional DCintertie power transmission line. To achieve good results, a remotereference completely outside the influence of the dominant source of EMnoise must be established. Experimental results so far indicate thatemplacing a reference site in Amargosa Valley, NV, 65 miles from the DCintertie, isstill insufficient for noise cancellation much of the time.Even though the DC line EM fields are planar at this distance, theyremain coherent with the nonplanar fields in the Coso area hence remotereferencing produces incorrect responses. We have successfully unwrappedand applied MT times series from the permanent observatory at Parkfield,CA, and these appear adequate to suppress the interference of thecultural EM noise. The efficacy of this observatory is confirmed bycomparison to stations taken using an ultra-distant reference site eastof Socorro, NM. Operation of the latter reference was successful by usingfast ftp internet communication between Coso Junction and the New MexicoInstitute of Mining and Technology, using the University of Utah site asintermediary, and allowed referencing within a few hours of datadownloading at Coso. A grid of 102 MT stations was acquired over the Cosogeothermal area in 2003 and an additional 23 stations were acquired toaugment coverage in the southern flank of the first survey area in 2005.These data have been inverted to a fully three

  8. Magnetostratigraphy of the Ahuachapan-Chipilapa geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Fucugauchi, Jaime Urrutia [Universidad Nacional Autonoma de Mexico, Lab. de Paleomagnetismo y Geofisica Nuclear, Coyoacan (Mexico); Rodriguez, Vicente Torres; Partida, Eduardo Gonzalez [Instituto de Investigaciones Electricas, Dept. de Geotermia, Cuernavaca, Morelos (Mexico)

    1997-12-01

    The volcanic stratigraphy for the Ahuachapan-Chipilapa geothermal field is defined on the basis of the magnetostratigraphic results on 156 oriented samples from 33 sites. The magnetostratigraphic sequence shows that the major volcanism associated with the Concepcion de Ataco caldera and the Cuyanausul volcano took place during the middle Brunhes chron (Quaternary). Pre-caldera activity of small centers such as Empalizada and Apaneca in the southern sector of the field occurred during the early Brunhes (0.77{+-}0.07 Ma). Basaltic-andesitic activity associated with the Cuyanausul volcano took place earlier, i.e. during the Matuyama chron, possibly around 1.3{+-}0.15 and 1.7{+-}0.3 Ma. The local igneous basement is composed of Late Miocene-Pliocene andesites, ignimbrites and volcano-sedimentary deposits. Normal polarities and a K-Ar date of 7.37{+-}0.73 Ma indicate that the volcanic activity in the study area extends beyond the Gauss chron. The polarity of some of the units in the post-caldera sequence and in the Concepcion de Ataco and Cuyanausul sequences suggest that they may have recorded short polarity sub-chrons. (Author)

  9. Heterogeneous surface displacement pattern at the Hatchobaru geothermal field inferred from SAR interferometry time-series

    Science.gov (United States)

    Ishitsuka, Kazuya; Tsuji, Takeshi; Matsuoka, Toshifumi; Nishijima, Jun; Fujimitsu, Yasuhiro

    2016-02-01

    We estimated surface displacements using persistent scatterer SAR interferometry (PS-InSAR) around the Hatchobaru geothermal field, Japan, from 18 ALOS/PALSAR images acquired from July 2007 to December 2010. Generally, geothermal fields, covered with natural targets such as rocky terrain and vegetation, have been one of the difficult targets for PS-InSAR analysis. However, we applied space adaptive filtering to increase the number of pixels for measuring surface displacement. The results of our analysis demonstrate ground subsidence with decaying velocity over the observation period around the geothermal field. The spatial pattern of ground subsidence includes sharp boundaries of subsidence that can be interpreted as fault traces. We demonstrated the usefulness of PS-InSAR analysis with the space adaptive filtering to estimate surface displacements with high spatial resolution and high spatial density around a geothermal field.

  10. Discovery and geology of the Desert Peak geothermal field: a case history. Bulletin 97

    Energy Technology Data Exchange (ETDEWEB)

    Benoit, W.R.; Hiner, J.E.; Forest, R.T.

    1982-09-01

    A case history of the exploration, development (through 1980), and geology of the Desert Peak geothermal field is presented. Sections on geochemistry, geophysics, and temperature-gradient drilling are included.

  11. An overview of the geochemistry of Cerro Prieto geothermal field with emphasis on isotopic changes

    International Nuclear Information System (INIS)

    This paper reviews the global geochemical changes in the Cerro Prieto geothermal reservoir due to exploitation and presents some important conclusions. Distribution of oxygen-18, deuterium, chloride concentrations, enthalpy and geothermometry for the field are presented

  12. Detection of Surface Temperature Anomalies in the Coso Geothermal Field Using Thermal Infrared Remote Sensing

    Science.gov (United States)

    Coolbaugh, M.; Eneva, M.; Bjornstad, S.; Combs, J.

    2007-12-01

    We use thermal infrared (TIR) data from the spaceborne ASTER instrument to detect surface temperature anomalies in the Coso geothermal field in eastern California. The identification of such anomalies in a known geothermal area serves as an incentive to search for similar markers to areas of unknown geothermal potential. We carried out field measurements concurrently with the collection of ASTER images. The field data included reflectance, subsurface and surface temperatures, and radiosonde atmospheric profiles. We apply techniques specifically targeted to correct for thermal artifacts caused by topography, albedo, and thermal inertia. This approach has the potential to reduce data noise and to reveal thermal anomalies which are not distinguishable in the uncorrected imagery. The combination of remote sensing and field data can be used to evaluate the performance of TIR remote sensing as a cost-effective geothermal exploration tool.

  13. Plate boundary deformation and man-made subsidence around geothermal fields on the Reykjanes Peninsula, Iceland

    KAUST Repository

    Keiding, Marie

    2010-07-01

    We present Interferometric Synthetic Aperture Radar (InSAR) data from 1992-1999 and 2003-2008 as well as GPS data from 2000-2009 for the active plate boundary on the Reykjanes Peninsula, southwest Iceland. The geodetic data reveal deformation mainly due to plate spreading, anthropogenic subsidence caused by geothermal fluid extraction and, possibly, increasing pressure in a geothermal system. Subsidence of around 10. cm is observed during the first 2. years of production at the Reykjanes geothermal power plant, which started operating in May 2006. We model the surface subsidence around the new power plant using point and ellipsoidal pressure sources in an elastic halfspace. Short-lived swarms of micro-earthquakes as well as aseismic fault movement are observed near the geothermal field following the start of production, possibly triggered by the stresses induced by geothermal fluid extraction. © 2010 Elsevier B.V.

  14. Mexican--American cooperative program at the Cerro Prieto Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Witherspoon, P.A.; Espinosa, H.A.; Lippmann, M.J.; Mercado, A.M.; Wollenberg, H.A.

    1978-08-01

    The Cerro Prieto project incorporates studies of the geologic, hydrogeologic, geochemical, and geophysical setting of the geothermal field as well as its structural, reservoir engineering, and subsidence characteristics. A description of the activities involved in each part of this cooperative program is presented. Text of the agreement between the Comision Federal de Electricidad of Mexico and the USERDA for the cooperative study of the Cerro Prieto geothermal field is included.

  15. Residential and commercial space heating and cooling with possible greenhouse operation; Baca Grande development, San Luis Valley, Colorado. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Goering, S.W.; Garing, K.L.; Coury, G.E.; Fritzler, E.A.

    1980-05-01

    A feasibility study was performed to evaluate the potential of multipurpose applications of moderate-temperature geothermal waters in the vicinity of the Baca Grande community development in the San Luis Valley, Colorado. The project resource assessment, based on a thorough review of existing data, indicates that a substantial resource likely exists in the Baca Grande region capable of supporting residential and light industrial activity. Engineering designs were developed for geothermal district heating systems for space heating and domestic hot water heating for residences, including a mobile home park, an existing motel, a greenhouse complex, and other small commercial uses such as aquaculture. In addition, a thorough institutional analysis of the study area was performed to highlight factors which might pose barriers to the ultimate commercial development of the resource. Finally, an environmental evaluation of the possible impacts of the proposed action was also performed. The feasibility evaluation indicates the economics of the residential areas are dependent on the continued rate of housing construction. If essentially complete development could occur over a 30-year period, the economics are favorable as compared to existing alternatives. For the commercial area, the economics are good as compared to existing conventional energy sources. This is especially true as related to proposed greenhouse operations. The institutional and environmental analyses indicates that no significant barriers to development are apparent.

  16. Radon and ammonia transects across the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Semprini, L.; Kruger, P.

    1981-01-01

    Radon and ammonia transects, conducted at the Cerro Prieto geothermal field, involve measurement of concentration gradients at wells along lines of structural significance in the reservoir. Analysis of four transects showed radon concentrations ranging from 0.20 to 3.60 nCi/kg and ammonia concentrations from 17.6 to 59.3 mg/l. The data showed the lower concentrations in wells of lowest enthalpy fluid and the higher concentrations in wells of highest enthalpy fluid. Linear correlation analysis of the radon-enthalpy data indicated a strong relationship, with a marked influence by the two-phase conditions of the produced fluid. It appears that after phase separation in the reservoir, radon achieves radioactive equilibrium between fluid and rock, suggesting that the phase separation occurs well within the reservoir. A two-phase mixing model based on radon-enthalpy relations allows estimation of the fluid phase temperatures in the reservoir. Correlations of ammonia concentration with fluid enthalpy suggests an equilibrium partitioning model in which enrichment of ammonia correlates with higher enthalpy vapor.

  17. Results of investigations at the Ahuachapan geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, B.; Goff, F.; Van Eeckhout, E.; Hanold, B. (comps.)

    1990-04-01

    Well logging operations were performed in eight of the geothermal wells at Ahuachapan. High-temperature downhole instruments, including a temperature/rabbit, caliper, fluid velocity spinner/temperature/pressure (STP), and fluid sampler, were deployed in each well. The caliper tool was used primarily to determine if chemical deposits were present in well casings or liners and to investigate a suspected break in the casing in one well. STP logs were obtained from six of the eight wells at various flow rates ranging from 30 to 80 kg/s. A static STP log was also run with the wells shut-in to provide data to be used in the thermodynamic analysis of several production wells. The geochemical data obtained show a system configuration like that proposed by C. Laky and associates in 1989. Our data indicate recharge to the system from the volcanic highlands south of the field. Additionally, our data indicate encroachment of dilute fluids into deeper production zones because of overproduction. 17 refs., 50 figs., 10 tabs.

  18. Modeling research in low-medium temperature geothermal field, Tianjin

    Institute of Scientific and Technical Information of China (English)

    WANG; Kun(王坤); LI; Chunhua(李春华)

    2002-01-01

    The geothermal reservoir in Tianjin can be divided into two parts: the upper one is the porous medium reservoir in the Tertiary system; the lower one includes the basement reservoir in Lower Paleozoic and Middle-Upper Proterozoic. Hot springs are exposed in the northern mountain and confined geothermal water is imbedded in the southern plain. The geothermal reservoir is incised by several fractures. In recent years, TDS of the geothermal water have gone up along with the production rate increasing, along the eastern fracture zone (Cangdong Fracture and West Baitangkou Fracture). This means that the northern fracture system is the main seepage channel of the deep circulation geothermal water, and the reservoir has good connection in a certain area and definite direction. The isotopic research about hydrogen and carbon chronology indicates that the main recharge period of geothermal water is the Holocene Epoch, the pluvial and chilly period of 20 kaBP. The karst conduits in weathered carbonate rocks of the Proterozoic and Lower Paleozoic and the northeast regional fracture system are the main feeding channels of Tianjin geothermal water. Since the Holocene epoch, the geothermal water stayed at a sealed warm period. The tracer test in WR45 doublet system shows that the tracer test is a very effective measure for understanding the reservoir's transport nature and predicting the cooling time and transport velocity during the reinjection. 3-D numerical simulation shows that if the reinjection well keeps a suitable distance from the production well, reinjection will be a highly effective measure to extract more thermal energy from the rock matrix. The cooling of the production well will not be a problem.

  19. Residential and commercial space heating and cooling with possible greenhouse operation: Baca Grande development, San Luis Valley, Colorado

    Science.gov (United States)

    Goering, S. W.; Garing, K. L.; Coury, G. E.; Fritzler, E. A.

    1980-05-01

    A feasibility study was performed to evaluate the potential of multipurpose applications of moderate temperature geothermal waters in the vicinity of the Baca Grande community development in the San Luis Valley, Colorado. Engineering designs were developed for geothermal district heating systems for space heating and domestic hot water heating for residences, including a mobile home park, an existing motel, a greenhouse complex, and other small commercial uses such as aquaculture. In addition, a thorough institutional analysis of the study area was performed to highlight factors which might pose barriers to the ultimate commercial development of the resource. Finally, an environmental evaluation of the possible impacts of the proposed action was also performed. The institutional and environmental analyses indicate that no significant barriers to development are apparent.

  20. Applications of stable isotopes and radioisotopes in the exploration and reservoir management of Philippine geothermal fields

    International Nuclear Information System (INIS)

    The development of indigenous geothermal energy resources is currently one of the primary thrusts of the country's energy program. Presently, the Philippines has a total of geothermal generating capacity of about 1400 MWe. This comprises about 20% of the total energy mix and electricity requirements of the country. By 1998, an additional capacity of about 500 MWe will be commissioned, and the PHilippines would be generating 1900 MWe of electricity from geothermal energy resources. From 1990 to 1993, PNOC EDC (Philippine National Oil Company, Energy Development Corporation) has been granted a research contract by the International Atomic Energy Agency (IAEA). The Company has also been a recipient since 1991 of an IAEA Technical Assistance on the use of stable isotope techniques in geothermal hydrology. Stable isotopes, particularly 18O and 2H, in conjunction with other geochemical parameters and geological and geophysical data, have been used to: a) establish the local meteoric water line; b) determine the origin of geothermal fluids; c) delineate the elevation of recharge of geothermal and ground water systems; d) confirm pre-exploitation hydrochemical models; e) identify physical and chemical processes due to exploitation of the geothermal resource (i.e. reinjection fluid returns, incursion of cold meteoric water, boiling due to pressure drawdown and mixing with acidic steam condensates); and, f) estimate reservoir temperatures. Techniques using radioisotopes, such as 14C, have also been used for the age-dating of charred wood samples collected from some of our geothermal exploration areas. The detection of 3H has also been used as an indicator for the incursion of recent cold meteoric water into the geothermal system. Tracer studies using 131I, have also been previously carried out, in coordination with the Philippine Nuclear Research Institute, to determine local hydrology and flow paths of reinjected water in some of our geothermal fields

  1. EXPLORATION BY MEANS OF GEOPHYSICAL METHODS OF GEOTHERMAL FIELDS AND CASE STUDIES

    Directory of Open Access Journals (Sweden)

    Züheyr KAMACI

    1997-01-01

    Full Text Available Geothermal energy which is one of the reuseable energy resources, can save as much as 77 million barrels of petroleum equivalent annually when used in the production of electricity and heating-environment. Geophysical exploration methods plays in important role in the fields of geothermal exploration, development and observational studies. Thermal and geoelectrical methods are the most effective methods which shows the temperature variation anomalies and mechanical drilling places. But, when the other methods of gravity, magnetic, radiometric, well geophysics and well logs can be used in conjunction with seismic tomography, apart from the mentioned geophysical exploration method, better results could be obtained. From the above mentioned facts various case history reports are given from our country and worldwide to determine geothermal energy resources by using geophysical exploration technique application. From these results of studies a 55 °C hot water artessian aquifer is found in the Uşak-Banaz geothermal field by applying geoelectrical methods.

  2. Overview of the Wayang Windu geothermal field, West Java, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Bogie, Ian [Sinclair, Knight Merz Ltd., PO Box 9806, Newmarket, Auckland (New Zealand); Kusumah, Yudi Indra; Wisnandary, Merry C. [Magma Nusantara Ltd., Wisma Mulia 50th Floor, Jl. Jend. Gatot Subroto no. 42, Jakarta 12710 (Indonesia)

    2008-06-15

    The Wayang Windu geothermal field, West Java, Indonesia, is interpreted to be transitional between vapour-dominated and liquid-dominated conditions with four coalesced fluid upwelling centres that generally become younger and more liquid-dominated towards the south. Two of these centres are associated with the large Gunung Malabar andesite stratovolcano and the other two with the smaller aligned Gunung Wayang and Gunung Windu andesitic volcanoes to the south. The overall potential resource area is of the order of 40 km{sup 2}. Deep wells encounter a deep liquid reservoir whose top, which ranges from 0 to 400 m above sea level (m asl) becomes progressively deeper toward the south. As pressure versus elevation conditions are the same throughout the deep liquid reservoir it is likely to be contiguous. This liquid-dominated reservoir is overlain by three separate vapour-dominated reservoirs. The northernmost is the largest as it is coalesced over two separate fluid upwelling centres. Its low gas content, size, prolonged productivity and isobaric for elevation nature, preclude it from being a parasitic steam zone. Mineralogical relationships demonstrate that this vapour zone was originally liquid-dominated with a deep water level as high as 1700 m asl. Subsequent boil off may reflect low recharge rates due to hydrological isolation at depth. To the south, the vapour-dominated reservoirs decrease in thickness and are characterized by progressively higher pressures, temperatures and gas contents. These changes suggest that the southernmost vapour-dominated zone is the youngest and that these zones become increasing older to the north. (author)

  3. The Momotombo Geothermal Field, Nicaragua: Exploration and development case history study

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-07-01

    This case history discusses the exploration methods used at the Momotombo Geothermal Field in western Nicaragua, and evaluates their contributions to the development of the geothermal field models. Subsequent reservoir engineering has not been synthesized or evaluated. A geothermal exploration program was started in Nicaragua in 1966 to discover and delineate potential geothermal reservoirs in western Nicaragua. Exploration began at the Momotombo field in 1970 using geological, geochemical, and geophysical methods. A regional study of thermal manifestations was undertaken and the area on the southern flank of Volcan Momotombo was chosen for more detailed investigation. Subsequent exploration by various consultants produced a number of geotechnical reports on the geology, geophysics, and geochemistry of the field as well as describing production well drilling. Geological investigations at Momotombo included photogeology, field mapping, binocular microscope examination of cuttings, and drillhole correlations. Among the geophysical techniques used to investigate the field sub-structure were: Schlumberger and electromagnetic soundings, dipole mapping and audio-magnetotelluric surveys, gravity and magnetic measurements, frequency domain soundings, self-potential surveys, and subsurface temperature determinations. The geochemical program analyzed the thermal fluids of the surface and in the wells. This report presents the description and results of exploration methods used during the investigative stages of the Momotombo Geothermal Field. A conceptual model of the geothermal field was drawn from the information available at each exploration phase. The exploration methods have been evaluated with respect to their contributions to the understanding of the field and their utilization in planning further development. Our principal finding is that data developed at each stage were not sufficiently integrated to guide further work at the field, causing inefficient use of

  4. Radon-222 behavior at the Latera geothermal field (Northern Latium)

    International Nuclear Information System (INIS)

    Permanent probes to sample soil gases were placed at the Latera geothermal area, Vulsini Mts. (Latium, Italy). Due to the remarkable uranium and thorium concentrations in the alkali-potassic volcanites outcropping in the area, quite high Rn-222 values, ranging from 740 up to 11.640 pCi/L, were found. This area results as one of the most anomalous in Italy. The highest radon activities match geological and tectonic structures, such as fractures and faults, and a deep high structure, which constitutes the geothermal reservoir. These high radon values also conform to a major amount of helium-4 and carbon dioxide. The latter gases are enriched in the gaseous phase of the geothermal fluids, and their migration is also controlled by structural features. All this suggests that the enrichment of radon-222 in the soil gases sampled in connection with the geothermal reservoir can be linked to a direct contribution of radium-226 carried by deep seated fluids from the reservoir itself

  5. Structural Mapping of Olkaria Domes Geothermal Field using Geochemical Soil Gas Surveys, Remote Sensing and GIS

    OpenAIRE

    Munyiri, Samuel Kinyua, 1983-

    2016-01-01

    Olkaria Geothermal field is a high temperature geothermal system located on the eastern arm of the East African Rift System. It is placed within the Central Kenya Rift Valley and is dominated by late Quaternary rhyolitic volcanism. Basalts, tuffs and trachytes occupy the subsurface with the latter forming the reservoir rock. Normal faulting mapped during this study is prominent in the Domes field with dips ranging from 20° to 80° to the west and the east. Fault strikes vary from north-south, ...

  6. Slope stability analysis of landslide in Wayang Windu Geothermal Field, Pangalengan, West Java Province, Indonesia

    Science.gov (United States)

    Yuhendar, A. H.; Wusqa, U.; Kartiko, R. D.; Raya, N. R.; Misbahudin

    2016-05-01

    Large-scale landslide occurred in Margamukti village, Pangalengan, Bandung Regency, West Java Province, Indonesia. The landslide damaged geothermal gas pipeline along 300 m in Wayang Windu Geothermal Field. Based on field observation, landslide occured in rotational sliding movement. Laboratory analysis were conducted to obtain the characteristics of the soil. Based on the condition of the landslide in this area, the Factor of Safety can be simulated by the soil mechanics approach. Factor of safety analysis based on soil cohesion and internal friction angle was conducted using manual sensitivity analysis for back analysis. The analysis resulted soil cohesion in critical condition (FSgranular media.

  7. Geothermal structure in the Hatchobaru geothermal field derived from detailed gravity and resistivity structure; Seimitsu juryoku oyobi hiteiko kozo kara mita haccho genchi chinetsu chitai no chinetsu kozo

    Energy Technology Data Exchange (ETDEWEB)

    Tagomori, K.; Honda, M.; Akiyoshi, M.; Nagano, H.; Haruguchi, K. [Kyushu Electric Power Co., Inc., Fukuoka (Japan)] Ushijima, K. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering

    1997-12-01

    Faults in the Hatchobaru geothermal field, Ohita Prefecture have been identified or presumed by various surface explorations and surveys and also verified by drilling. In this field, there is the Ohtake geothermal plant (12.5 MW) of Kyushu Electric Power Co. and in the early stage of the development, relatively detailed gravity structures were surveyed within the range of about 20km {sup 2} including the above field and this range embraces the existing production wells and reduction wells as well as their surroundings. However, any elucidation of the geothermal structure deeper than the development level remains insufficient. The elucidation of the deeper structure and the geothermal structure in its surroundings, which are necessary for determination of the drilling point for a replenishing well to be drilled in the future, is now an important issue. In this article, are put together the results of studies on the feature of the geothermal structure of the zone as well as the possibility of geothermal development of the depth based on the density structure and resistivity structure obtained from the gravity exploration and electromagnetic method exploration executed in recent years in the Hatchobaru field taken into consideration the latest available data. The gravity exploration is effective for a general survey of a wide area, but it has been found in Hatchobaru that the method is also effective for a precision survey once its observation stations are set thickly. 11 refs., 14 figs.

  8. Chemical Variations in the Rocks of La Primavera Geothermal Field (Mexico) Related with Hydrothermal Alteration

    Energy Technology Data Exchange (ETDEWEB)

    Prol-Ledesma, R.M.; Hernandez-Lombardini, S.I.; Lozano-Santa Cruz, R.

    1995-01-01

    The origin and fate of the components dissolved in the geothermal fluids are of great importance in the study of epithermal deposits, and in the environmental considerations for exploitation of geothermal fields. The chemical study of La Primavera geothermal field in Mexico has environmental importance due to the high arsenic concentration observed in the thermal water and the possible contamination of aquifers in the area. The variations in the chemistry of all altered samples with respect to unaltered samples indicates depletion of manganese, and the alkalis; and enrichment in iron and magnesium. Most samples show an enrichment in aluminum and titanium, and depletion in silica and calcium. Trace elements follow different trends at various depths: shallow depths are more favorable for deposition of the analyzed trace elements than the surface or the deep part of the reservoir.

  9. Uranium-thorium series radionuclides in brines and reservoir rocks from two deep geothermal boreholes in the Salton Sea geothermal field, southeastern California

    International Nuclear Information System (INIS)

    Naturally occurring U and Th series radionuclides have been analyzed in high temperature brines (∼ 300 degree C, 25 wt% dissolved solids) and associated rocks from two deep geothermal wells located on the northeastern margin of the Salton Sea Geothermal Field (SSGF). These data are part of a study of the SSGF as a natural analog of possible radionuclide behavior near a nuclear waste repository constructed in salt beds, and permit evaluation of some characteristics of water-rock interaction in the SSGF

  10. The microseismic observation in dry steam type geothermal field in Indonesia

    Science.gov (United States)

    Isroi, Alamsyah Rizki; Singarimbun, Alamta

    2016-02-01

    In this paper, we discuss about the use of micro earthquake method in monitoring of dry steam type geothermal field in Indonesia. This study takes X geothermal field, which is the pioneer of Indonesia's geothermal development. Therefore, it should be maintained for long period by doing proper production and reinjection activities. Hypocenters of microseismic events is represented movements of reinjection fluids that means it could be space where fractured zone is formed. We use Single Event Determination (SED) method to relocate the hypocenters of microseismic event during the period of January - June 2014. About 179 events of micro earthquake were recorded on that period, these micro earthquake have magnitudes in range of 0.4 to 2.1 SR. Some of them are related to reinjection fluid from injection well INJ21. The hypocenters which is related to injection fluid from INJ21 shows that fractured zones exist on there. These fractured zones is located in geothermal reservoirs based on the geological setting. Fractured zones caused by high pressure of reinjection fluid where it happens in geothermal reservoirs containing high temperature, when reinjection water contacted with high temperature reservoir, it will be a new fractured zones because of high intensity of micro earthquake events.

  11. Fundamental investigations in the field of the geothermal power engineering

    International Nuclear Information System (INIS)

    Paper presents the results of the many-year fundamental studies dealing with investigation into properties of a geothermal coolant, with problems of hydro-gas dynamics and erosion-and-corrosion effect on multicomponent media metals. Paper presents the results of the experimental investigations into crises in the upper boundary curve, dispersed structure of two-phase flows, film-formation and flow of liquid films and moisture separation, sedimentation, physical and chemical processes of erosion and corrosion and of stress corrosion cracking of metal

  12. Prospects of development of highly mineralized high-temperature resources of the Tarumovskoye geothermal field

    Science.gov (United States)

    Alkhasov, A. B.; Alkhasova, D. A.; Ramazanov, A. Sh.; Kasparova, M. A.

    2016-06-01

    The promising nature of integrated processing of high-temperature geothermal brines of the Tarumovskoye geothermal field is shown. Thermal energy of a geothermal brine can be converted to the electric power at a binary geothermal power plant (GPP) based on low-boiling working substance. The thermodynamic Rankine cycles are considered which are implemented in the GPP secondary loop at different evaporation temperatures of the working substance―isobutane. Among them, the most efficient cycle from the standpoint of attaining a maximum power is the supercritical one which is close to the so-called triangular cycle with an evaporation pressure of p e = 5.0 MPa. The used low-temperature brine is supplied from the GPP to a chemical plant, where main chemical components (lithium carbonate, burnt magnesia, calcium carbonate, and sodium chloride) are extracted from it according to the developed technology of comprehensive utilization of geothermal brines of chloride-sodium type. The waste water is delivered to the geotechnological complex and other consumers. For producing valuable inorganic materials, the electric power generated at the GPP is used. Owing to this, the total self-sufficiency of production and independence from external conditions is achieved. The advantages of the proposed geotechnological complex are the full utilization of the heat potential and the extraction of main chemical components of multiparameter geothermal resources. In this case, there is no need for reverse pumping, which eliminates the significant capital costs for building injection wells and a pumping station and the operating costs for their service. A characteristic of the modern state of the field and estimated figures of the integrated processing of high-temperature brines of well no. 6 are given, from which it follows that the proposed technology has a high efficiency. The comprehensive development of the field resources will make it possible to improve the economic structure of the

  13. Monitoring the movement of the cooler fluids in the deep geothermal reservoirs of Greater Tongonan geothermal field, Philippines

    International Nuclear Information System (INIS)

    Two types of cooler fluids are present in the Greater Tongonan geothermal field, namely the reinjected waste brine in the Tongonan reservoir and the shallow groundwater in the Mahanagdong reservoir. The influx of reinjection fluids in the production area of Tongonan became apparent in 1990 after seven years of commercial operations of the first power plant. The wells that previously delivered highly two-phase fluids started to become liquid-saturated. As a consequence, the fluid temperatures dropped by 10 deg. C and the field enthalpy declined from 2,200 kJ/kg to 1,600 kJ/kg. The new distribution of stable isotopes shows isotopic enrichment in the western part of the field [+1.00 per mille δ18O] where waste brine injection takes place. In Mahanagdong, the field started to generate 180 MW of power in July 1997 that brought about changes to the physical and chemical characteristics of the reservoir. After about one year of commercial operation, the production sector closest to the western part of the field sustained decline in fluid temperature and salinity ultimately leading to decline in bore output. The present stable isotope distribution across the field illustrates invasion of isotopically depleted fluids from the west to the production part of the field, passing through a northwest-trending structure. (author)

  14. 3-D inversion of magnetotelluric data in the Kakkonda geothermal field, northern Japan

    Czech Academy of Sciences Publication Activity Database

    Uchida, T.; Lee, T. J.; Červ, Václav

    Tokyo : SEGJ, 2003, s. 274-280. [SEGJ international symposium /6./. Tokyo (JP), 22.01.2003-24.01.2003] R&D Projects: GA MŠk ME 185 Institutional research plan: CEZ:AV0Z3012916 Keywords : magnetotelluric method * 3-D interpretation * geothermal field Subject RIV: DE - Earth Magnetism, Geodesy, Geography

  15. French know-how in the field of geothermal energy. District heating and electricity generation systems

    International Nuclear Information System (INIS)

    This brochure is aimed at presenting the French expertise, public and private, at international level in the field of geothermal energy (district heating and electricity generation systems). It presents a summary of the French public policy framework, measures to support Research and Development, innovation and training and offers from private companies. It has been designed by the ADEME in cooperation with the French ministry for Ecology and Sustainable Development, the French association of geothermal energy professionals, Ubifrance (the French Agency for international business development) and the French renewable energies union

  16. 222Rn behavior at the latera geothermal field (Northern Latium, Italy)

    International Nuclear Information System (INIS)

    Permanent probes to sample soil gases were placed at the Latera geothermal field, located in the Volsini Mts., Latium, Italy. Due to high uranium concentrations in the area's alkali-potassic volcanics outcropping, quite high 222Rn values, ranging from 9,260 up to 753,000 Bq/m3, were found. The highest radon activities match tectonic structures such as fractures and faults, and a deep high structure which consitutes the geothermal reservoir. These high radon values also conform to a major amount of 4He and CO2. The latter gases are enriched in the gaseous phase of the geothermal fluids, and their migration is also controlled by structural features. This suggests that the enrichment of 222Rn in the soil gases, can be linked to a direct contribution of 226Ra, carried by deep-seated fluids from the reservoir itself. (author) 17 refs.; 5 figs.; 1 tab

  17. The possibilities of utilisation of heat from Tattapani Geothermal field, India

    Energy Technology Data Exchange (ETDEWEB)

    Sarolkar, P.B. [Geological Survey of India, Hyderabad (India); Pitale, U.L. [Geological Survey of India, Nagpur (India)

    1996-12-31

    The Tattapani Geothermal field produces + 1800 1pm thermal water of 100{degrees}C from five production wells. The hot water production can sustain electricity production of 300 kWe by using a binary cycle power plant. The heat energy of effluent water from power plant can be utilized for direct heat utilization on horticulture, aquaculture, cold storage, silviculture etc; to augment the economics of the power plant be spot can be developed as a centre for tourist attraction by constructing botanical park, greenhouse, geyser show and crocodile farm. The direct heat utilization shemes can be planned in cascading order to achieve maximum utility of thermal water. Additional deep drilling is essential for optimum commercial utilization of the Geothermal energy. The direct heat utilisation shemes along with binary cycle power plant may help in development of the geothermal energy and boosting the economy of this region.

  18. 3-D analysis and interpretation of magnetotelluric data from the Aluto-Langano geothermal field, Ethiopia

    Science.gov (United States)

    Samrock, F.; Kuvshinov, A.; Bakker, J.; Jackson, A.; Fisseha, S.

    2015-09-01

    The Main Ethiopian Rift Valley encompasses a number of volcanoes, which are known to be actively deforming with reoccurring periods of uplift and setting. One of the regions where temporal changes take place is the Aluto volcanic complex. It hosts a productive geothermal field and the only currently operating geothermal power plant of Ethiopia. We carried out magnetotelluric (MT) measurements in early 2012 in order to identify the source of unrest. Broad-band MT data (0.001-1000 s) have been acquired at 46 sites covering the expanse of the Aluto volcanic complex with an average site spacing of 1 km. Based on this MT data it is possible to map the bulk electrical resistivity of the subsurface down to depths of several kilometres. Resistivity is a crucial geophysical parameter in geothermal exploration as hydrothermal and magmatic reservoirs are typically related to low resistive zones, which can be easily sensed by MT. Thus by mapping the electrical conductivity one can identify and analyse geothermal systems with respect to their temperature, extent and potential for production of energy. 3-D inversions of the observed MT data from Aluto reveal the typical electrical conductivity distribution of a high-enthalpy geothermal system, which is mainly governed by the hydrothermal alteration mineralogy. The recovered 3-D conductivity models provide no evidence for an active deep magmatic system under Aluto. Forward modelling of the tippers rather suggest that occurrence of melt is predominantly at lower crustal depths along an off-axis fault zone a few tens of kilometres west of the central rift axis. The absence of an active magmatic system implies that the deforming source is most likely situated within the shallow hydrothermal system of the Aluto-Langano geothermal field.

  19. Hydrochemical modelling and determination of 14C ages of geothermal waters in Kizildere and Tekkehamam fields

    International Nuclear Information System (INIS)

    Many geothermal fluids are encountered as springs and wells in the area between Buharkent - Yenice - Pamukkale located in the Aegean Region to the east of the Bueyuek Menderes Graben. This study, constituting a part of the project called 'Age and Origin Determination of the High Temperature Geothermal Fluids in the Bueyuek Menderes Graben' and directed by the MTA General Directorate, aims the recharge and circulation period verification of related resources by means of interpreting isotopic and hydrochemical data of the above mentioned region. For this purpose, water chemistry, δ18O, δ2H, δ3H, 14C, δ34S-SO4 ve δ18O-SO4 isotope sampling have been realized in order to determine the geochemical processes taken place in underground. As a result of the study the origin, the recharge altitudes and the circulation periods of grouped fluids with temperatures between 35 degrees- 242 degreeslocated in the region were clarified. According to the given chemical data, hydrochemically characterized waters are classified in 10 different types. It has been indicated that, six subtypes of the classification are constituted from the mixtures of waters at 242 degreesand 4th type Na-HCO3 belonging to Kizildere thermal waters, first type Ca-HCO3 waters, second type Ca-HCO3-SO4 waters and third type Ca-SO4 waters. According to the evaluation of the 14C isotope, the geothermal fluid discharging from the Kizildere Power Plant, corresponds to a turnovertime of 22.500 - 27.500 years. Previous studies reveal that the waters of the Tekkehamam geothermal field originate from the mixture of shallow groundwaters encountered in the site with geothermal fluids underflowing from the Kizildere geothermal field, in north-south direction. Taken into consideration this mentioned mixture model, the 14C isotope indicates a turnovertime of 31.000 years for R-1 geothermal well and 35.000 years for the нnatlм spring, located in the Tekkehamam geothermal field

  20. Determination of recharge and evolutionary study in new wells at Berlin geothermal field using isotopes

    International Nuclear Information System (INIS)

    CEL have been made a preliminary study at Berlin geothermal field in order to estimate the recharge area. The results using isotopic data since 1996 to date shows an average altitude of 1350 masl. This value is in agreement with hydrological and geological studies, which correspond to an infiltration zone located around the Berlin-Tecapa complex. Isotopic composition from Laguna de Alegria (LA) located in the same complex and Rio Lempa located 12 km away from the field shows that there is not relation with the recharge of the Berlin geothermal field. Also, an evolutionary study of the geothermal wells shows three definite groups: new wells, production wells and reinjection wells. Isotopic composition in recently drilled wells is changing with time, showing more depleted values than production wells in which isotopic composition is seated in the range δ18O = -3.5 per mille to δ18O = -3.9 per mille and δD=-42 per mille to δD = -45 per mille. It suggest new wells still have a mixture of geothermal water and water introduced along the drilling. Reinjection wells seems to have not impact over production wells, at least with the available information. Monitoring is still on. (author)

  1. Open Questions on the Origin of Life at Anoxic Geothermal Fields

    Science.gov (United States)

    Mulkidjanian, Armen Y.; Bychkov, Andrew Yu.; Dibrova, Daria V.; Galperin, Michael Y.; Koonin, Eugene V.

    2012-10-01

    We have recently reconstructed the `hatcheries' of the first cells by combining geochemical analysis with phylogenomic scrutiny of the inorganic ion requirements of universal components of modern cells (Mulkidjanian et al. Proc Natl Acad Sci U S A 109:E821-830, 2012). These ubiquitous, and by inference primordial, proteins and functional systems show affinity to and functional requirement for K+, Zn2+, Mn2+, and phosphate. Thus, protocells must have evolved in habitats with a high K+/Na+ ratio and relatively high concentrations of Zn, Mn and phosphorous compounds. Geochemical reconstruction shows that the ionic composition conducive to the origin of cells could not have existed in marine settings but is compatible with emissions of vapor-dominated zones of inland geothermal systems. Under an anoxic, CO2-dominated atmosphere, the ionic composition of pools of cool, condensed vapor at anoxic geothermal fields would resemble the internal milieu of modern cells. Such pools would be lined with porous silicate minerals mixed with metal sulfides and enriched in K+ ions and phosphorous compounds. Here we address some questions that have appeared in print after the publication of our anoxic geothermal field scenario. We argue that anoxic geothermal fields, which were identified as likely cradles of life by using a top-down approach and phylogenomics analysis, could provide geochemical conditions similar to those which were suggested as most conducive for the emergence of life by the chemists who pursuit the complementary bottom-up strategy.

  2. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141588 Guo Shiyan(Green Energy Geothermai Development Co.,SINOPEC,Xianyang 712000,China);Li Xiaojun Reservoir Stratum Characteristics and Geothermal Resources Potential of Rongcheng Uplift Geothermal Field in Baoding,Hebei Province(Chinese Journal of Geology,ISSN0563-5020,CN11-1937/P,48(3),2013,p.922-931,2 illus.,4 tables,10 refs.)Key words:geothermal fields,Hebei Province

  3. Case history report on East Mesa and Cerro Prieto geothermal fields

    Energy Technology Data Exchange (ETDEWEB)

    Davis, DG.; Sanyal, S.K.

    1979-06-01

    Well log analysis as applied to the geothermal industry is one of the areas of technology in great need of further development. One means of improving log analysis technology is to study case histories of the past uses of log analysis as applied to specific fields. The project described in this report involved case history studies on two well-known geothermal areas in North America: the East Mesa field in California and the Cerro Prieto field in Mexico. Since there was considerably more pertinent material available on East Mesa, a major part of the effort on this project was devoted to studying the East Mesa field. One particular problem that first came to attention when studying the Cerro Prieto data was the difficulty in determining actual formation temperature at the time of logging. Since the temperature can have a significant effect on well log readings, an accurate temperature determination was considered to be important.

  4. Inverse modeling and forecasting for the exploitation of the Pauzhetsky geothermal field, Kamchatka, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Finsterle, Stefan; Kiryukhin, A.V.; Asaulova, N.P.; Finsterle, S.

    2008-04-01

    A three-dimensional numerical model of the Pauzhetsky geothermal field has been developed based on a conceptual hydrogeological model of the system. It extends over a 13.6-km2 area and includes three layers: (1) a base layer with inflow; (2) a geothermal reservoir; and (3) an upper layer with discharge and recharge/infiltration areas. Using the computer program iTOUGH2 (Finsterle, 2004), the model is calibrated to a total of 13,675 calibration points, combining natural-state and 1960-2006 exploitation data. The principal model parameters identified and estimated by inverse modeling include the fracture permeability and fracture porosity of the geothermal reservoir, the initial natural upflow rate, the base-layer porosity, and the permeabilities of the infiltration zones. Heat and mass balances derived from the calibrated model helped identify the sources of the geothermal reserves in the field. With the addition of five makeup wells, simulation forecasts for the 2007-2032 period predict a sustainable average steam production of 29 kg/s, which is sufficient to maintain the generation of 6.8 MWe at the Pauzhetsky power plant.

  5. Hydraulic model and steam flow numerical simulation of the Cerro Prieto geothermal field, Mexico, pipeline network

    International Nuclear Information System (INIS)

    The development of a hydraulic model and numerical simulation results of the Cerro Prieto geothermal field (CPGF) steam pipeline network are presented. Cerro Prieto is the largest water-dominant geothermal field in the world and its transportation network has 162 producing wells, connected through a network of pipelines that feeds 13 power-generating plants with an installed capacity of 720 MWe. The network is about 125 km long and has parallel high- and low-pressure networks. Prior to this study, it was suspected that steam flow stagnated or reversed from its planned direction in some segments of the network. Yet, the network complexity and extension complicated the analysis of steam transport for adequate delivery to the power plants. Thus, a hydraulic model of the steam transportation system was developed and implemented numerically using an existing simulator, which allowed the overall analysis of the network in order to quantify the pressure and energy losses as well as the steam flow direction in every part of the network. Numerical results of the high-pressure network were obtained which show that the mean relative differences between measured and simulated pressures and flowrates are less than 10%, which is considered satisfactory. Analysis of results led to the detection of areas of opportunity and to the recommendation of changes for improving steam transport. A main contribution of the present work is having simulated satisfactorily the longest (to our knowledge), and probably the most complex, steam pipeline network in the world. - Highlights: • Extensive literature review of flow models of geothermal steam gathering networks. • Hydraulic model of the Cerro Prieto geothermal field steam network. • Selection and validation of the employed pressure-drop model. • Numerical flow simulation of the world's largest geothermal steam gathering network. • Detailed network pressure drop analysis and mapping of steam flow distribution

  6. Did stresses from the Cerro Prieto Geothermal Field influence the El Mayor-Cucapah rupture sequence?

    Science.gov (United States)

    Trugman, Daniel T.; Borsa, Adrian A.; Sandwell, David T.

    2014-12-01

    The Mw 7.2 El Mayor-Cucapah (EMC) earthquake ruptured a complex fault system in northern Baja California that was previously considered inactive. The Cerro Prieto Geothermal Field (CPGF), site of the world's second largest geothermal power plant, is located approximately 15 km to the northeast of the EMC hypocenter. We investigate whether anthropogenic fluid extraction at the CPGF caused a significant perturbation to the stress field in the EMC rupture zone. We use Advanced Land Observing Satellite interferometric synthetic aperture radar data to develop a laterally heterogeneous model of fluid extraction at the CPGF and estimate that this extraction generates positive Coulomb stressing rates of order 15 kPa/yr near the EMC hypocenter, a value which exceeds the local tectonic stressing rate. Although we cannot definitively conclude that production at the CPGF triggered the EMC earthquake, its influence on the local stress field is substantial and should not be neglected in local seismic hazard assessments.

  7. Results of investigations at the Zunil geothermal field, Guatemala: Well logging and brine geochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Adams, A.; Dennis, B.; Van Eeckhout, E.; Goff, F.; Lawton, R.; Trujillo, P.E.; Counce, D.; Archuleta, J. (Los Alamos National Lab., NM (USA)); Medina, V. (Instituto Nacional de Electrificacion, Guatemala City (Guatemala). Unidad de Desarollo Geotermico)

    1991-07-01

    The well logging team from Los Alamos and its counterpart from Central America were tasked to investigate the condition of four producing geothermal wells in the Zunil Geothermal Field. The information obtained would be used to help evaluate the Zunil geothermal reservoir in terms of possible additional drilling and future power plant design. The field activities focused on downhole measurements in four production wells (ZCQ-3, ZCQ-4, ZCQ-5, and ZCQ-6). The teams took measurements of the wells in both static (shut-in) and flowing conditions, using the high-temperature well logging tools developed at Los Alamos National Laboratory. Two well logging missions were conducted in the Zunil field. In October 1988 measurements were made in well ZCQ-3, ZCQ-5, and ZCQ-6. In December 1989 the second field operation logged ZCQ-4 and repeated logs in ZCQ-3. Both field operations included not only well logging but the collecting of numerous fluid samples from both thermal and nonthermal waters. 18 refs., 22 figs., 7 tabs.

  8. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131088 Fan Difu (Geological Survey of Jiangsu Province , Nanjing 210018 , China ); Xu Xueqiu Origin Study of Geothermal Field in Xiaoyangkou of Rudong County in Jiangsu (Journal of Geology , ISSN1674-3636 , CN32-1796/P , 36 (2), 2012 , p.192-197 , 3illus. , 9refs.) Key words : geothermal fields , Jiangsu Province

  9. Fracture mapping in geothermal fields with long-offset induction logging

    Energy Technology Data Exchange (ETDEWEB)

    Wilt, M.; Takasugi, Shinji; Uchida, Toshihiro [and others

    1997-12-31

    The mapping of producing fractures in a geothermal field is an important technical objective in field development. Locating, orienting, and assessing producing fractures can guide drilling programs and optimize the placement of production and injection wells. A long-offset multicomponent borehole induction resistivity tool capable of surviving the high temperatures encountered in geothermal wells has recently been developed in a NEDO project, {open_quotes}Deep-Seated Geothermal Reservoirs,{close_quotes} and tested in a high temperature environment. Several characteristics of this device make it ideal for detecting producing fractures. Whereas commercial induction logging devices have source-receiver separations of 1 m, this device has multiple sensors with separations up to 8 m, allowing for deeper penetration and the ability to straddle fracture-induced washout zones in boreholes. The three-component measurements also make it possible to map the strike and inclination of nearby fractures and other three-dimensional structures. This, in turn, allows for accurate projection of these structures into the space between wells. In this paper, we describe the design of the tool and show results of a performance test carried out in an oil-field steam flood. Data from vertical sensors are compared to conventional logging results and indicate the recent formation of a low-resistivity zone associated with high temperatures due to steam flood breakthrough. Horizontal field data indicate that the high-temperature zone is irregular in the vicinity of the borehole and more pronounced closest to the steam injector.

  10. Field trip guide to the Valles Caldera and its geothermal systems

    Energy Technology Data Exchange (ETDEWEB)

    Goff, F.E.; Bolivar, S.L.

    1983-12-01

    This field trip guide has been compiled from extensive field trips led at Los Alamos National Laboratory during the past six years. The original version of this guide was designed to augment a workshop on the Valles Caldera for the Continental Scientific Drilling Program (CSDP). This workshop was held at Los Alamos, New Mexico, 5-7 October 1982. More stops were added to this guide to display the volcanic and geothermal features at the Valles Caldera. The trip covers about 90 miles (one way) and takes two days to complete; however, those who wish to compress the trip into one day are advised to use the designated stops listed in the Introduction. Valles Caldera and vicinity comprise both one of the most exciting geothermal areas in the United States and one of the best preserved Quaternary caldera complexes in the world.

  11. Slope stability analysis of landslide in Wayang Windu Geothermal Field, Pangalengan, West Java Province, Indonesia

    Science.gov (United States)

    Yuhendar, A. H.; Wusqa, U.; Kartiko, R. D.; Raya, N. R.; Misbahudin

    2016-05-01

    Large-scale landslide occurred in Margamukti village, Pangalengan, Bandung Regency, West Java Province, Indonesia. The landslide damaged geothermal gas pipeline along 300 m in Wayang Windu Geothermal Field. Based on field observation, landslide occured in rotational sliding movement. Laboratory analysis were conducted to obtain the characteristics of the soil. Based on the condition of the landslide in this area, the Factor of Safety can be simulated by the soil mechanics approach. Factor of safety analysis based on soil cohesion and internal friction angle was conducted using manual sensitivity analysis for back analysis. The analysis resulted soil cohesion in critical condition (FS<1) is 6.01 kPa. This value is smaller than cohesion of undisturbed slope soil sample. Water from rainfall is the most important instability factors in research area. Because it decreases cohesion in soils and increases weight and pore water pressure in granular media.

  12. Field tests of 2- and 40-tube condensers at the East Mesa Geothermal Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, R.W.; Domingo, N.

    1982-05-01

    Two water-cooled isobutane condensers, one with 2 tubes and one with 40 tubes, were subjected to field tests at the East Mesa Geothermal Test Site to assess relative heat transfer performance in both surface evaporator and direct-contact evaporator modes. The five groups of tests established that field performance was below earlier laboratory-determined levels and that direct-contact evaporator mode performance was poorer than that for the surface evaporator mode. In all test situations, fluted condenser tubes performed better than smooth condenser tubes. Cooling water quality had no significant effect on performance, but brine preflash in the direct-contact mode did promote some relative performance improvement. Important implications of these results for binary geothermal power plants are that (1) working-fluid-side impurities can significantly degrade heat transfer performance of the power plant condensers and (2) provisions for minimizing such impurities may be required.

  13. Open Questions on the Origin of Life at Anoxic Geothermal Fields

    OpenAIRE

    Mulkidjanian, Armen Y; Bychkov, Andrew Yu.; Dibrova, Daria V.; Michael Y. Galperin; Koonin, Eugene V

    2012-01-01

    We have recently reconstructed the ‘hatcheries’ of the first cells by combining geochemical analysis with phylogenomic scrutiny of the inorganic ion requirements of universal components of modern cells (Mulkidjanian et al.: Origin of first cells at terrestrial, anoxic geothermal fields. Proc Natl Acad Sci USA 2012, 109:E821–830). These ubiquitous, and by inference primordial, proteins and functional systems show affinity to and functional requirement for K+, Zn2+, Mn2+, a...

  14. Development of a geothermal resource in a fractured volcanic formation: Case study of the Sumikawa Geothermal Field, Japan. Final report, May 1, 1995--November 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K.; Combs, J.; Pritchett, J.W. [and others

    1997-07-01

    The principal purpose of this case study of the Sumikawa Geothermal Field is to document and to evaluate the use of drilling logs, surface and downhole geophysical measurements, chemical analyses and pressure transient data for the assessment of a high temperature volcanic geothermal field. This comprehensive report describes the work accomplished during FY 1993-1996. A brief review of the geological and geophysical surveys at the Sumikawa Geothermal Field is presented (Section 2). Chemical data, consisting of analyses of steam and water from Sumikawa wells, are described and interpreted to indicate compositions and temperatures of reservoir fluids (Section 3). The drilling information and downhole pressure, temperature and spinner surveys are used to determine feedzone locations, pressures and temperatures (Section 4). Available injection and production data from both slim holes and large-diameter wells are analyzed to evaluate injectivity/productivity indices and to investigate the variation of discharge rate with borehole diameter (Section 5). New interpretations of pressure transient data from several wells are discussed (Section 6). The available data have been synthesized to formulate a conceptual model for the Sumikawa Geothermal Field (Section 7).

  15. Microearthquake Study of the Salton Sea Geothermal Field, California: Evidence of Stress Triggering

    International Nuclear Information System (INIS)

    A digital network of 24 seismograph stations was operated from September 15, 1987 to September 30, 1988, by Lawrence Livermore National Laboratory and Unocal as part of the Salton Sea Scientific Drilling Project to study seismicity related to tectonics and geothermal activity near the drilling site. More than 2001 microearthquakes were relocated in this study in order to image any pervasive structures that may exist within the Salton Sea geothermal field. First, detailed velocity models were obtained through standard 1-D inversion techniques. These velocity models were then used to relocate events using both single event methods and Double-Differencing, a joint hypocenter location method. An anisotropic velocity model was built from anisotropy estimates obtained from well logs within the study area. During the study period, the Superstition Hills sequence occurred with two moderate earthquakes of MS 6.2 and MS 6.6. These moderate earthquakes caused a rotation of the stress field as observed from the inversion of first motion data from microearthquakes at the Salton Sea geothermal field. Coulomb failure analysis also indicates that microearthquakes occurring after the Superstition Hills sequence are located within a region of stress increase suggesting stress triggering caused by the moderate earthquakes

  16. Microearthquake Study of the Salton Sea Geothermal Field, California: Evidence of Stress Triggering - Masters Thesis

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Austin Adams

    2002-02-01

    A digital network of 24 seismograph stations was operated from September 15, 1987 to September 30, 1988, by Lawrence Livermore National Laboratory and Unocal as part of the Salton Sea Scientific Drilling Project to study seismicity related to tectonics and geothermal activity near the drilling site. More than 2001 microearthquakes were relocated in this study in order to image any pervasive structures that may exist within the Salton Sea geothermal field. First, detailed velocity models were obtained through standard 1-D inversion techniques. These velocity models were then used to relocate events using both single event methods and Double-Differencing, a joint hypocenter location method. An anisotropic velocity model was built from anisotropy estimates obtained from well logs within the study area. During the study period, the Superstition wills sequence occurred with two moderate earthquakes of MS 6.2 and MS 6.6. These moderate earthquakes caused a rotation of the stress field as observed from the inversion of first motion data from microearthquakes at the Salton Sea geothermal field. Coulomb failure analysis also indicates that microearthquakes occurring after the Superstition Hills sequence are located within a region of stress increase suggesting stress triggering caused by the moderate earthquakes.

  17. Strontium isotope as an indicator of fluid residence from selected geothermal fields in China

    International Nuclear Information System (INIS)

    The purpose of this study is to develop a new indicator of fluid residence in complex geothermal systems. The method is based on a serious of assumptions in geothermal systems. Firstly, the Yangbajain geothermal field of Tibet is chosen to study the behaviors of strontium isotope and verify these assumptions when a deeper thermal fluid ascends. In the past years, two reservoirs have been identified at different depths in the Yangbajain field. A shallow reservoir is found at depths less than 450m, with temperature varying from 150 deg. C to 170 deg. C and decreasing toward the southeast. Parent rock in the shallow reservoir is altered Himalayan granite in the northwest part of the field and Quaternary alluvium in the southeast part. A deep reservoir is found at depths in the range from 750m to 1400m, with temperature higher than 250 deg. C. Parent rock in the deep reservoir is fractured Himalayan granite. Both thermal fluids from the shallow and deep reservoir and cold groundwater are collected for the analysis of chemical compositions and strontium isotope. Rock samples are also collected at different depths in wells for strontium isotope measurement

  18. Reflection seismic imaging in the volcanic area of the geothermal field Wayang Windu, Indonesia

    Science.gov (United States)

    Polom, Ulrich; Wiyono, Wiyono; Pramono, Bambang; Krawczyk, CharLotte M.

    2014-05-01

    Reflection seismic exploration in volcanic areas is still a scientific challenge and requires major efforts to develop imaging workflows capable of an economic utilization, e.g., for geothermal exploration. The SESaR (Seismic Exploration and Safety Risk study for decentral geothermal plants in Indonesia) project therefore tackles still not well resolved issues concerning wave propagation or energy absorption in areas covered by pyroclastic sediments using both active P-wave and S-wave seismics. Site-specific exploration procedures were tested in different tectonic and lithological regimes to compare imaging conditions. Based on the results of a small-scale, active seismic pre-site survey in the area of the Wayang Windu geothermal field in November 2012, an additional medium-scale active seismic experiment using P-waves was carried out in August 2013. The latter experiment was designed to investigate local changes of seismic subsurface response, to expand the knowledge about capabilities of the vibroseis method for seismic surveying in regions covered by pyroclastic material, and to achieve higher depth penetration. Thus, for the first time in the Wayang Windu geothermal area, a powerful, hydraulically driven seismic mini-vibrator device of 27 kN peak force (LIAG's mini-vibrator MHV2.7) was used as seismic source instead of the weaker hammer blow applied in former field surveys. Aiming at acquiring parameter test and production data southeast of the Wayang Windu geothermal power plant, a 48-channel GEODE recording instrument of the Badan Geologi was used in a high-resolution configuration, with receiver group intervals of 5 m and source intervals of 10 m. Thereby, the LIAG field crew, Star Energy, GFZ Potsdam, and ITB Bandung acquired a nearly 600 m long profile. In general, we observe the successful applicability of the vibroseis method for such a difficult seismic acquisition environment. Taking into account the local conditions at Wayang Windu, the method is

  19. Monitoring production using surface deformation: the Hijiori test site and the Okuaizu geothermal field

    International Nuclear Information System (INIS)

    Production in geothermal reservoirs often leads to observable surface displacement. As shown in this paper, there is a direct relationship between such displacement and reservoir dynamics. This relationship is exploited in order to image fluid flow at two geothermal field sites. At the first locality, the Hijiori Hot Dry Rock (HDR) test site, 17 tilt meters record deformation associated with a 2.2 km deep injection experiment. Images of fluid migration along a ring fracture system of the collapsed Hijiori caldera are obtained. At the Okuaizu geothermal field, leveling and tilt meter data provide constraints on long- and short-term fluid movement within the reservoir. A set of 119 leveling data suggest that the north-to-northeast trending Takiyagawa fault acts as a barrier to flow. The northwesterly oriented Chinoikezawa and Sarukurazawa faults appear to channel fluid from the southeast. The tilt data from Okuaizu indicate that a fault paralleling the Takiyagawa fault zone acts as a conduit to transient flow, on a time scale of several weeks. The volume strain in a region adjacent to the injection wells reaches a maximum and then decreases with time. The transient propagation of fluid along the fault may be due to pressure build-up, resulting from the re-initiation of injection. (author)

  20. Imaging the deep source of the Rotorua and Waimangu geothermal fields, Taupo Volcanic Zone, New Zealand

    Science.gov (United States)

    Heise, W.; Caldwell, T. G.; Bertrand, E. A.; Hill, G. J.; Bennie, S. L.; Palmer, N. G.

    2016-03-01

    Magnetotelluric data were recorded in a 45 × 10 km band crossing the Rotorua and Waimangu geothermal fields in the northern part of the Taupo Volcanic Zone in the central North Island of New Zealand. 3-D inverse modelling of these data show that beneath the low resistivity areas marking the near surface geothermal fields, localised electrically conductive zones are present in the crust below about 2.5 and 3.5 km depth at Rotorua and Waimangu, respectively. At increasing depth these conductive zones broaden and appear to merge with a larger conductive zone at 8 km depth situated between the geothermal systems. At Rotorua the top of the conductive zone is situated directly beneath the area of greatest surface heat and gas discharge. At Waimangu the uppermost part of the deeper conductive zone is situated beneath the western part of Lake Rotomahana, also an area of intense surface thermal activity and high heat flux. The localised conductive zones are interpreted to be high temperature (quasi-magmatic) fluids rising from a broader zone of partial melt at deeper levels.

  1. Hydrothermal alteration of sediments associated with surface emissions from the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Valette-Silver, J.N.; Esquer P., I.; Elders, W.A.; Collier, P.C.; Hoagland, J.R.

    1981-01-01

    A study of the mineralogical changes associated with these hydrothermal vents was initiated with the aim of developing possible exploration tools for geothermal resources. The Cerro Prieto reservoir has already been explored by extensive deep drilling so that relationships between surface manifestations and deeper hydrothermal processes could be established directly. Approximately 120 samples of surface sediments were collected both inside and outside of the vents. The mineralogy of the altered sediments studied appears to be controlled by the type of emission. A comparison between the changes in mineralogy due to low temperature hydrothermal activity in the reservoir, seen in samples from boreholes, and mineralogical changes in the surface emission samples shows similar general trends below 180 C: increase of quartz, feldspar and illite, with subsequent disappearance of kaolinite, montmorillonite, calcite and dolomite. These mineral assemblages seem to be characteristic products of the discharge from high intensity geothermal fields.

  2. Reservoir Characterization around Geothermal Field, West Java, Indonesia Derived from 4-D Seismic Tomography

    Science.gov (United States)

    Verdhora Ry, Rexha; Nugraha, A. D.

    2016-01-01

    Observation of micro-seismic events induced by intensive geothermal exploitation in a particular geothermal field, located in West Java region, Indonesia was used to detect the fracture and permeability zone. Using local monitoring seismometer network, tomographic inversions were conducted for the three-dimensional Vp, Vs, and Vp/Vs structure of the reservoir for January - December 2007, January - December 2008, and January - December 2009. First, hypocenters location was relocated using joint hypocenter determination (JHD) method in purpose to estimate best location. Then, seismic tomographic inversions were conducted using delay time tomography for dataset of every year respectively. The travel times passing through the three-dimensional velocity model were calculated using ray tracing pseudo-bending method. Norm and gradient damping were added to constrain blocks without ray and to produce smooth solution model. The inversion algorithm was developed in Matlab environment. Our tomographic inversion results from 3-years of observations indicate the presence of low Vp, low Vs, and low Vp/Vs ratio at depths of about 1 - 3 km below sea level. These features were interpreted may be related to steam-saturated rock in the reservoir area of this geothermal field. The locations of the reservoir area were supported by the data of well- trajectory, where the zones of high Vp/Vs were observed around the injection wells and the zones of low Vp/Vs were observed around the production wells. The extensive low Vp/Vs anomaly that occupies the reservoir is getting stronger during the 3-years study period. This is probably attributed to depletion of pore liquid water in the reservoir and replacement with steam. Continuous monitoring of Vp, Vs, and Vp/Vs is an effective tool for geothermal reservoir characterization and depletion monitoring and can potentially provide information in parts of the reservoir which have not been drilled.

  3. Punta Pitt, Galapagos Ba/Ca Data for 1963-1982

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — File contains Ba/Ca data (in mmol/mol) presented by Lea et al. (1989). Samples were measured at the Massachusetts Institute of Technology by D. Lea. Ba...

  4. Geochemical Modelling of the High-Temperature Mahanagdong Geothermal Field, Leyte, Philippines

    OpenAIRE

    Angcoy, Erlindo C., 1975-

    2010-01-01

    The high-temperature and liquid-dominated Mahanagdong geothermal field has supplied steam since 1997 to power plants with total installed capacity of 180 MWe. A geochemical assessment of the field is presented based on analytical data of fluids sampled at the wellheads of 26 wet-steam wells. The pH of the liquid samples ranges from 3 to 8 as measured on-site. Analyses of the water samples include major and minor elements. With the aid of speciation programs, the analytical data were used ...

  5. Seismicity and deformation in the Coso Geothermal field from 2000 to 2012

    Science.gov (United States)

    Kaven, J. Ole; Hickman, Stephen H.; Davatzes, Nicholas C.

    2015-04-01

    Induced micro-seismicity in geothermal reservoirs, in particular in enhanced geothermal systems (EGS), is an intended byproduct of injection and production, as it often indicates the generation of permeability pathways on either pre-existing or newly generated faults and fractures. The hazard of inducing an earthquake large enough to cause damage to surface structures, however, is not easily avoided and has led to termination of geothermal projects. To explore the physical processes leading to damaging earthquakes, we investigate the evolution of seismicity and the factors controlling the migration, moment release rate, and structure within the seismicity in the Coso Geothermal Field (CGF). The CGF has been in production since the 1980s and includes both naturally occurring geothermal resources and portions of the reservoir that are EGS projects. We report on seismicity in the CGF that has been relocated with high precision double-difference relocation and simultaneous velocity inversion to understand the reservoir compartmentalization, in particular, where boundaries to flow exist both vertically and horizontally. We also calculate moment magnitudes (Mw) from the initial displacement pulse of the seismograms to relate moment directly to the deformation. We find that two distinct compartments form the CGF, which are divided by an aseismic gap that also shows a relatively low Vp/Vs ratio. Further, we find that events with Mw> 3.5 tend to map onto larger fault structures that are imaged by the relocated seismicity. We relate the temporal and spatial migration of moment release rate to the injection and production records in the reservoir by employing a thermo-poro-elastic finite element model in which the compartment boundaries are defined by the seismicity. We find that pore pressure effects alone are not responsible for the migration of seismicity and that poro-elastic and thermo-elastic strain changes can account for more of the observed moment release rate than

  6. Hydro-geochemical and isotopic fluid evolution of the Los Azufres geothermal field, Central Mexico

    International Nuclear Information System (INIS)

    Hydrothermal alteration at Los Azufres geothermal field is mostly propylitic with a progressive dehydration with depth and temperature increase. Argillic and advanced argillic zones overlie the propylitic zone owing to the activity of gases in the system. The deepest fluid inclusions (proto-fluid) are liquid-rich with low salinity, with NaCl dominant fluid type and ice melting temperatures (Tmi) near zero (0 deg C), and salinities of 0.8 wt% NaCl equivalent. The homogenization temperature (Th) = 325 ± 5 deg C. The boiling zone shows Th = ±300 deg C and apparent salinities between 1 and 4.9 wt% NaCl equivalent, implying a vaporization process and a very important participation of non-condensable gases (NCGs), mostly CO2. Positive clathrate melting temperatures (fusion) with Th = 150 deg C are observed in the upper part of the geothermal reservoir (from 0 to 700 m depth). These could well be the evidence of a high gas concentration. The current water produced at the geothermal wells is NaCl rich (geothermal brine) and is fully equilibrated with the host rock at temperatures between T = 300 and 340 deg C. The hot spring waters are acid-sulfate, indicating that they are derived from meteoric water heated by geothermal steam. The NCGs related to the steam dominant zone are composed mostly of CO2 (80-98% of all the gases). The gases represent between 2 and 9 wt% of the total mass of the fluid of the reservoir. The authors interpret the evolution of this system as deep liquid water boiling when ascending through fractures connected to the surface. Boiling is caused by a drop of pressure, which favors an increase in the steam phase within the brine ascending towards the surface. During this ascent, the fluid becomes steam-dominant in the shallowest zone, and mixes with meteoric water in perched aquifers. Stable isotope compositions (δ18O-δD) of the geothermal brine indicate mixing between meteoric water and a minor magmatic component. The enrichment in δ18O is due to

  7. Ba/Ca Reproducibility and Growth Banding in Gulf of Alaska Bamboo Corals

    Science.gov (United States)

    Serrato Marks, G.; LaVigne, M.; Hill, T. M.; Sauthoff, W.; Guilderson, T. P.; Roark, E. B.; Dunbar, R. B.

    2014-12-01

    Deep-sea bamboo corals have been proposed as deep-ocean paleoceanographic archives because of their longevity and radial growth bands. Previous work has shown that bamboo coral Ba/Ca is a promising proxy for seawater barium, however, validation of Ba/Ca reproducibility is required. In addition, the growth band formation mechanism is uncertain, with some proposing that crystal orientation causes banding visible under light microscopy. The objective of this study was to evaluate Ba/Ca reproducibility and characterize growth band crystal orientation. Visible bands measured with a petrographic microscope were used to align LA-ICP-MS data collected along three replicate radii of the calcitic internodes of two well-dated corals from the Gulf of Alaska (collected live at 720m and 643m; 48°3'N, 132°44'W). Ba/Ca signals smoothed to ~annual resolution were reproducible within each coral (r=0.6-0.7; p<0.0001; n=3 radii/coral), suggesting that Ba/Ca varies in response to the external environment on annual timescales. Ba/Ca in the 720m coral increased from 1977 to 1998, a warm Pacific Decadal Oscillation (PDO) regime, possibly due to increased export production. The shallower coral (634m) revealed the inverse trend, suggesting variability in seawater barium dynamics with depth. Electron backscatter diffraction analysis of visible growth bands showed a preferred crystal orientation that does not correspond to location of visible bands or elemental composition, suggesting that crystal orientation does not cause bamboo coral banding. Overall, results show that regional oceanic signals are recorded as reproducible Ba/Ca variability in these corals. Comparison of these data to other well-dated records from the northeast Pacific would determine whether the relationship between Ba/Ca and PDO is regional. Additional archives of trace element variability will strengthen our understanding of how rapid climate change impacts intermediate ocean biogeochemistry.

  8. Detailed microearthquake studies at the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Majer, E.L. (Lawrence Berkeley Lab., CA); McEvilly, T.V.

    1981-01-01

    There appears to be an increase in seismic activity within the Cerro Prieto production zone since early 1978. The microearthquake activity is now more or less constant at a rate of 2 to 3 events per day. The b-values within the field are significantly higher inside the production zone than are those for events on faults outside of the production region. The earthquakes seem to be controlled by the Hidalgo fault, although slight clustering was observed in the center of the main production region. The earthquakes within the production zone may reflect the reservoir dynamics associated with heat and mass withdrawal. Mechanisms such as volume change, thermal stresses and weakening of materials associated with boiling (i.e., phase changes, dissolution) may all be responsible for the increased seismic activity. Although a small reinjection program has started, the pressure drawdown conditions existing within the field would imply that increased pore pressure resulting from the injection activities is not responsible for the increased seismic activity.

  9. The Ahuachapan geothermal field, El Salvador: Exploitation model, performance predictions, economic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ripperda, M.; Bodvarsson, G.S.; Lippmann, M.J.; Witherspoon, P.A. (Lawrence Berkeley Lab., CA (United States)); Goranson, C. (Geothermal Consultant Richmond, California (USA))

    1991-05-01

    The Earth Sciences Division of Lawrence Berkeley Laboratory (LBL) is conducting a reservoir evaluation study of the Ahuachapan geothermal field in El Salvador. This work is being performed in cooperation with the Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) and the Los Alamos National Laboratory (LANL) with funding from the US Agency for International Development (USAID). This appendix to the report describes the work done during the second year of the study (FY89--90). The first year's report included (1) the development of geological and conceptual models of the field, (2) the evaluation of the reservoir's initial thermodynamic and chemical conditions and their changes during exploitation, (3) the evaluation of interference test data and the observed reservoir pressure decline and (4) the development of a natural state model for the field. In these appendices the results of reservoir engineering studies to evaluate different production-injection scenarios for the Ahuachapan geothermal field are discussed. The purpose of the work was to evaluate possible reservoir management options to enhance as well as to maintain the productivity of the field during a 30-year period (1990--2020). The ultimate objective was to determine the feasibility of increasing the electrical power output at Ahuachapan from the current level of about 50 MW{sub e} to the total installed capacity of 95 MW{sub e}. the flow rate and flowing enthalpy are shown for 1975--1990 and extrapolated out to 2015. Future temperature distributions are predicted.

  10. The Ahuachapan geothermal field, El Salvador: Exploitation model, performance predictions, economic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ripperda, M.; Bodvarsson, G.S.; Lippmann, M.J.; Witherspoon, P.A.; Goranson, C.

    1991-05-01

    The Earth Sciences Division of Lawrence Berkeley Laboratory (LBL) is conducting a reservoir evaluation study of the Ahuachapan geothermal field in El Salvador. This work is being performed in cooperation with the Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) and the Los Alamos National Laboratory (LANL) with funding from the US Agency for International Development (USAID). This report describes the work done during the second year of the study (FY89--90). The first year's report included (1) the development of geological and conceptual models of the field, (2) the evaluation of the reservoir's initial thermodynamic and chemical conditions and their changes during exploitation, (3) the evaluation of interference test data and the observed reservoir pressure decline and (4) the development of a natural state model for the field. In the present report the results of reservoir engineering studies to evaluate different production-injection scenarios for the Ahuachapan geothermal field are discussed. The purpose of the work was to evaluate possible reservoir management options to enhance as well as to maintain the productivity of the field during a 30-year period (1990--2020). The ultimate objective was to determine the feasibility of increasing the electrical power output at Ahuachapan from the current level of about 50 MW{sub e} to the total installed capacity of 95 MW{sub e}. 20 refs., 75 figs., 10 tabs.

  11. Chemical and isotopic studies of fluids in the Bacon-Manito geothermal field, Philippines

    International Nuclear Information System (INIS)

    Chemical and isotopic data from springs rainfall and wells have been used to characterize the fluids and to identify the major reservoir processes at Bacon-Manito geothermal field, Philippines. The deep reservoir fluid is postulated to be heated to about 325 deg. C and have 7500-8500 mg/kg chloride. Its chemical and isotopic composition is best characterized by wells OP-3D and OP-4D. Spring isotopic data show that their discharges are predominantly meteoric in origin, with a few following a simple evaporation trend. Chloride-enthalpy and chlorid-δ18O relations reveal that the upflowing geothermal reservoir fluid undergoes: (1) dilution with meteroic water, (2) conductive cooling as these move away, (3) mixing with steam condensate, and (4) vapor gain. Well gas chemistry points to the absence of direct magmatic contributions while it is shown that the equilibrium reaction CH4 + 2H2O = CO2 + 4H2 is likely to be established. The observed positive 18O shifts of well waters relative to the local water meteoric line were considered to be due primarily to mixing of deeply-seated ''andesitic'' and meteoric waters while water-rock interaction could not be ruled out. Finally, a conceptual geochemical model of the geothermal system is proposed. (author). 21 refs, 12 figs, 5 tabs

  12. Relationship between water chemistry and sediment mineralogy in the Cerro Prieto geothermal field: a preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Valette-Silver, J.N. (Univ. de Perpignan, France); Thompson, J.M.; Ball, J.W.

    1981-01-01

    The chemical compositions of waters collected from the Cerro Prieto geothermal production wells and hydrothermal emanations are different. Compared to the Cerro Prieto well waters, the surficial waters generally contain significantly less potassium, slightly less calcium and chloride, and significantly more magnesium and sulfate. In comparison to the unaltered sediments, the changes in the mineralogy of the altered sediments appear to be controlled by the type of emanation (well, spring, mud pot, geyser, fumarole, or cold pool). However, an increase in quartz and potassium feldspar percentages seems to be characteristic of the majority of the sediments in contact with geothermal fluids. Preliminary attempts to model the chemical processes occurring in the Cerro Prieto geothermal field using chemical equilibrium calculations are reported. For this purpose the chemical compositions of thermal waters (well and surficial emanation) were used as input data to make calculations with SOLMNEQ and WATEQ2 computer programs. Then the theoretical mineral composition of altered sediments was predicted and compared to the mineralogy actually observed in the solid samples.

  13. A method of fundamental solutions in poroelasticity to model the stress field in geothermal reservoirs

    CERN Document Server

    Augustin, Matthias Albert

    2015-01-01

    This monograph focuses on the numerical methods needed in the context of developing a reliable simulation tool to promote the use of renewable energy. One very promising source of energy is the heat stored in the Earth’s crust, which is harnessed by so-called geothermal facilities. Scientists from fields like geology, geo-engineering, geophysics and especially geomathematics are called upon to help make geothermics a reliable and safe energy production method. One of the challenges they face involves modeling the mechanical stresses at work in a reservoir. The aim of this thesis is to develop a numerical solution scheme by means of which the fluid pressure and rock stresses in a geothermal reservoir can be determined prior to well drilling and during production. For this purpose, the method should (i) include poroelastic effects, (ii) provide a means of including thermoelastic effects, (iii) be inexpensive in terms of memory and computational power, and (iv) be flexible with regard to the locations of data ...

  14. Modeling studies of the Ahuachapan geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Aunzo, Z.; Steingrimsson, B.; Bodvarsson, G.S. (Lawrence Berkeley Lab., CA (USA)); Escobar, C.; Quintanilla, A. (Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL) (El Salvador))

    1989-01-01

    Modeling studies of Ahuachapan include analyses of interference test data, modeling of the fieldwide pressure decline and the development of a three-dimensional natural state model of the field. The main objective of this work is to obtain reasonable estimates for the transmissivity and storativity of the reservoir and to investigate fluid and heat flow patterns in the system. The analyses of the interference test data and the long term pressure decline data indicate that the average reservoir transmissivity is about 30 Dm and the storativity about 3.5 {times} 10{sup {minus}6} m/Pa. The natural state modeling supports an overall average transmissivity of 25--35 Dm and indicates that the system is recharged with 255{degree}C hot water at a rate of about 225 kg/s. The total thermal throughflow for the Ahuachapan system is estimated to be about 250 MW{sub t}. 10 refs., 11 figs., 3 tabs.

  15. Distributed Acoustic Sensing Technology in a Magmatic Geothermal Field - First Results From a Survey in Iceland

    Science.gov (United States)

    Reinsch, Thomas; Jousset, Philippe; Henninges, Jan; Blanck, Hanna

    2016-04-01

    Seismic methods are particularly suited for investigating the Earth's subsurface. Compared to surface-measurements , wellbore measurements can be used to acquire more detailed information about rock properties and possible fluid pathways within a geothermal reservoir. For high temperature geothermal wells, however, ambient temperatures are often far above the operating temperature range of conventional geophones. One way to overcome this limitation is the application of fiber optic sensor systems, where only the passive optical fiber is subjected to downhole conditions. Their applicability is thus determined by the operating temperature range of the optical fiber. Choosing appropriate fibers, such sensor systems can be operated at temperatures far above 200°C. Along an optical fiber, the distributed acoustic sensing technology (DAS) can be used to acquire acoustic signals with a high spatial and temporal resolution. Previous experiments have shown that the DAS technology is well suited for active seismic measurements. Within the framework of the EC funded project IMAGE, a fiber optic cable was deployed in a newly drilled geothermal well (RN-34) within the Reykjanes geothermal field, Iceland. Additionally, a >15 km fiber optic cable, already available at the surface, was connected to a DAS read-out unit. Acoustic data was acquired continuously for 9 days. Hammer shots were performed at the wellhead as well as along the surface cable in order to locate individual acoustic traces and calibrate the spatial distribution of the acoustic information. During the monitoring period both signals from on- and offshore explosive sources and natural seismic events could be recorded. We compare the fiber optic data to conventional seismic records from a dense seismic network deployed on the Reykjanes in the course of the IMAGE project. Here, first results from the seismic survey will be presented.

  16. Conversion of back pressure type turbines to cross compound type for Los Azufres geothermal field, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Cadenas, Roberto; Fernandez, Maria Elena [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)

    1996-01-01

    This paper presents a case of converting geothermal back pressure turbines into cross compound condensing type. Comision Federal de Electricidad (CFE) is operating 16 back pressure turbines, 5 MW each, which were installed to investigate and evaluate several zones of the Mexican geothermal fields. Nine of these units are installed in Los Azufres geothermal field. The purpose of these units was to remain operating for some time and then be replaced by condensing units with better efficiencies. However, because of new fields are not available, it has became a necessity to get better efficiencies with the present units and leave them operating in their original sites for a longer time. The conversion of that turbines will allow to increase the power of each unit, from 5 MW to 8.5 MW, with competitive production costs and positive environmental effects. [Espanol] Se presenta un caso de conversion de turbinas tipo contrapresion a turbinas tipo cross compound. La Comision Federal de Electricidad (CFE) tiene en operacion 16 turbinas de contrapresion de 5 MW cada una, que fueron instaladas para investigar y evaluar diversas zonas de los campos geotermicos de Mexico. Nueve de esas unidades se encuentran en el campo de Los Azufres. Las expectativas de la empresa eran operar temporalmente estas unidades en algunos sitios de interes y posteriormente substituirlas por unidades a condensacion, de mejor eficiencia. Sin embargo, en este momento no se cuenta con nuevos campos productores para la reubicacion de las turbinas, siendo necesario mejorar su eficiencia a efecto de dejarlas operando como instalaciones permanentes en sus sitios originales. La conversion permitira incrementar la potencia de cada unidad de 5 MW a 8.5 MW, con costos de produccion competitivos y beneficios ambientales adicionales.

  17. Deficiency of a Sinorhizobium meliloti bacA Mutant in Alfalfa Symbiosis Correlates with Alteration of the Cell Envelope

    OpenAIRE

    Ferguson, Gail P.; Roop II, R. Martin; Walker, Graham C.

    2002-01-01

    The BacA protein is essential for the long-term survival of Sinorhizobium meliloti and Brucella abortus within acidic compartments in plant and animal cells, respectively. Since both the S. meliloti and B. abortus bacA mutants have an increased resistance to bleomycin, it was hypothesized that BacA was a transporter of bleomycin and bleomycin-like compounds into the bacterial cell. However, our finding that the S. meliloti bacA mutant also has an increased sensitivity to detergents, a hydroph...

  18. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20101802 Fang Bin (China University of Geosciences,Beijing 100083,China);Yang Yunjun Characteristics and Resource Evaluation of the Jiwa Geothermal Field in Central Qiangtang,Northern Tibet,China (Geological Bulletin of China,ISSN1671-

  19. A Geologic, Hyrologic and Geochemical Model of the Serrazzano Zone of the Larderello Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Calorie, C.; Celati, R.; D' Amore, F.; Squarci, P.; Truesdell, A.

    1980-12-16

    The large number of nonproductive wells lying along the northern and western margins of the Larderello field have indicated some boundaries of the productive area but have also prevented us, so far, from fully understanding the pheiomena controlling the behavior of the geothermal system in these areas. In 1980 ENEL re-opened some wells that had been shut-in immediately after drilling, thus offering us the possibility to complete the geochemical picture by means of numerous samplings of steam, gas and water in both productive and nonproductive wells. Some recent physical parameters measured in nonproductive and abandoned wells also helped in further defining the hydrogeological and thermal situation.

  20. Rapid high temperature field test method for evaluation of geothermal calcite scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1982-08-01

    A test method is described which allows the rapid field testing of calcite scale inhibitors in high- temperature geothermal brines. Five commercial formulations, chosen on the basis of laboratory screening tests, were tested in brines with low total dissolved solids at ca 500 F. Four were found to be effective; of these, 2 were found to be capable of removing recently deposited scale. One chemical was tested in the full-flow brine line for 6 wks. It was shown to stop a severe surface scaling problem at the well's control valve, thus proving the viability of the rapid test method. (12 refs.)

  1. Hydrothermal alteration in the EPF replacement wells, Olkaria Geothermal field, Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Mungania, J. [Kenya Power & Lighting Co. Ltd., Naivasha (Kenya)

    1996-12-31

    Olkaria Geothermal area is located in the central sector of the Kenya, Rift Valley. A 45MW Geothermal power station has been operational at Olkaria since 1985 supplied by 22 of the 26 wells drilled in the Eastern production field (EPF). Between 1988 and 1993, eight more wells referred to as {open_quote}replacement wells{close_quote} were drilled in the same field to boost steam supply to the station. Petrographic analyses of the drill cuttings is usually done to determine detail stratigraphy of the field, extends of hydrothermal activity, subsurface structures and other parameters which may influence production potential of a well. Analyses of the drill cuttings from the EPF wells show that: Variations in the whole rock alteration intensities correlate with differences in rocktypes. Permeable horizons, especially the productive feeder zones are well marked by enhanced hydrothermal minerals depositions, mainly quartz, calcite, pyrite and epidote. Other aspects of state of reservoir like boiling are signified by presence of bladed calcite.

  2. Land subsidence caused by the East Mesa geothermal field, California, observed using SAR interferometry

    Science.gov (United States)

    Massonnet, D.; Holzer, T.; Vadon, H.

    1997-01-01

    Interferometric combination of pairs of synthetic aperture radar (SAR) images acquired by the ERS-1 satellite maps the deformation field associated with the activity of the East Mesa geothermal plant, located in southern California. SAR interferometry is applied to this flat area without the need of a digital terrain model. Several combinations are used to ascertain the nature of the phenomenon. Short term interferograms reveal surface phase changes on agricultural fields similar to what had been observed previously with SEASAT radar data. Long term (2 years) interferograms allow the study of land subsidence and improve prior knowledge of the displacement field, and agree with existing, sparse levelling data. This example illustrates the power of the interferometric technique for deriving accurate industrial intelligence as well as its potential for legal action, in cases involving environmental damages. Copyright 1997 by the American Geophysical Union.

  3. Moment tensor inversions of M ~ 3 earthquakes in the Geysers geothermal fields, California

    Science.gov (United States)

    Guilhem, A.; Hutchings, L.; Dreger, D. S.; Johnson, L. R.

    2014-03-01

    Microearthquakes have come into high public awareness due to being induced by the development and exploitation of enhanced and natural geothermal fields, hydrofracturing, and CO2 sequestration sites. Characterizing and understanding the faulting process of induced earthquakes, which is generally achieved through moment tensor inversion, could both help in risk prediction and in reservoir development monitoring. However, this is a challenging task because of their lower signal-to-noise ratio at frequencies typically used in earthquake source analyses. Therefore, higher-resolution velocity models and modeling of seismic waves at higher frequencies are required. In this study, we examine both the potentials to obtain moment tensor solutions for small earthquakes and the uncertainty of those solutions. We utilize a short-period seismic network located in the Geysers geothermal field in northern California and limit our study to that which would be achieved by industry in a typical reservoir environment. We obtain full moment tensor solutions of M ~ 3 earthquakes using waveform modeling and first-motion inversions. We find that these two data sets give complimentary but yet different solutions. Some earthquakes correspond possibly to complex processes in which both shear and tensile failures occur simultaneously or sequentially. This illuminates the presence of fluids at depth and their role for the generation of these small-magnitude earthquakes. Finally, since first motions are routinely obtained for all magnitude earthquakes, our approach could be extended to small earthquakes where noise level and complex Green's functions prohibit using waveforms in moment tensor inversions.

  4. Laboratory measurements of reservoir rock from the Geysers geothermal field, California

    Science.gov (United States)

    Lockner, D.A.; Summers, R.; Moore, D.; Byerlee, J.D.

    1982-01-01

    Rock samples taken from two outcrops, as well as rare cores from three well bores at the Geysers geothermal field, California, were tested at temperatures and pressures similar to those found in the geothermal field. Both intact and 30?? sawcut cylinders were deformed at confining pressures of 200-1000 bars, pore pressure of 30 bars and temperatures of 150?? and 240??C. Thin-section and X-ray analysis revealed that some borehole samples had undergone extensive alteration and recrystallization. Constant strain rate tests of 10-4 and 10-6 per sec gave a coefficient of friction of 0.68. Due to the highly fractured nature of the rocks taken from the production zone, intact samples were rarely 50% stronger than the frictional strength. This result suggests that the Geysers reservoir can support shear stresses only as large as its frictional shear strength. Velocity of p-waves (6.2 km/sec) was measured on one sample. Acoustic emission and sliding on a sawcut were related to changes in pore pressure. b-values computed from the acoustic emissions generated during fluid injection were typically about 0.55. An unusually high b-value (approximately 1.3) observed during sudden injection of water into the sample may have been related to thermal cracking. ?? 1982.

  5. Mantle-derived CO2 in Hot Springs of the Rehai Geothermal Field,Tengchong, China

    Institute of Scientific and Technical Information of China (English)

    REN Jianguo; WANG Xianbin; OUYANG Ziyuan

    2005-01-01

    Gas concentrations and isotopic compositions of He and CO2 were determined on free gas samples from ten hot springs of the Rehai geothermal field, Tengchong, China. The results showed that hot-spring CO2 gas, together with He,was derived mainly from the mantle, indicating the accumulation of mantle-derived volatiles beneath the survey area. The δ13C values of CO2, higher than those of the typical mantle-derived carbon and the isotopic composition of hot-spring-free CO2 in unequilibrium with dissolved CO2, are recognized only in the Rehai geothermal field, suggesting that there seems to be a still-degassing magmatic intrusion at depths, which provides mantle-derived volatiles to the hydrothermal system above. The accumulation of those volatiles has probably played an important role in triggering earthquakes in this region.In addition, the isotopic characteristics of He and C also indicate that the magmatic intrusion seems to have been derived from the MORB source, and could be contaminated by crustal materials during its upwelling through the continental crust.

  6. PNAS Plus: Origin of first cells at terrestrial, anoxic geothermal fields

    Science.gov (United States)

    Mulkidjanian, Armen Y.; Bychkov, Andrew Yu.; Dibrova, Daria V.; Galperin, Michael Y.; Koonin, Eugene V.

    2012-04-01

    All cells contain much more potassium, phosphate, and transition metals than modern (or reconstructed primeval) oceans, lakes, or rivers. Cells maintain ion gradients by using sophisticated, energy-dependent membrane enzymes (membrane pumps) that are embedded in elaborate ion-tight membranes. The first cells could possess neither ion-tight membranes nor membrane pumps, so the concentrations of small inorganic molecules and ions within protocells and in their environment would equilibrate. Hence, the ion composition of modern cells might reflect the inorganic ion composition of the habitats of protocells. We attempted to reconstruct the "hatcheries" of the first cells by combining geochemical analysis with phylogenomic scrutiny of the inorganic ion requirements of universal components of modern cells. These ubiquitous, and by inference primordial, proteins and functional systems show affinity to and functional requirement for K+, Zn2+, Mn2+, and phosphate. Thus, protocells must have evolved in habitats with a high K+/Na+ ratio and relatively high concentrations of Zn, Mn, and phosphorous compounds. Geochemical reconstruction shows that the ionic composition conducive to the origin of cells could not have existed in marine settings but is compatible with emissions of vapor-dominated zones of inland geothermal systems. Under the anoxic, CO2-dominated primordial atmosphere, the chemistry of basins at geothermal fields would resemble the internal milieu of modern cells. The precellular stages of evolution might have transpired in shallow ponds of condensed and cooled geothermal vapor that were lined with porous silicate minerals mixed with metal sulfides and enriched in K+, Zn2+, and phosphorous compounds.

  7. Pre-exploitation state of the Ahuachapán geothermal field, El Salvador

    Science.gov (United States)

    Aunzo, Z.; Laky, C.; Steingrimsson, B.; Bodvarsson, G.S.; Lippmann, M.J.; Truesdell, A.H.; Escobar, C.; Quintanilla, A.; Cuellar, G.

    1991-01-01

    The lithology and structural features of the Ahuachapán geothermal area and their impact on the movement of cold and hot fluids within the system are described, as well as the development and evaluation of the natural state model of the field. Four major lithologic units are present in Ahuachapán and three major aquifers have been identified; flow patterns and zones of fluid mixing were located on the basis of temperature and geochemical data from wells and surface manifestations. Geologic structures control the heat and fluid recharge and the flow within the reservoir. Modeling studies suggest, in agreement with field data, an overall average transmissivity of 25–35 darcy-meters, and indicate that the system is recharged by waters with temperatures greater than 250°C. The total thermal throughflow for the Ahuachapán reservoir in the unexploited state is estimated to be about 250 MWt.

  8. Geologic characteristics of a portion of the Salton Sea geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Tewhey, J.D.

    1977-04-25

    The examination of drill cuttings and core samples from the Magmamax Nos. 2 and 3 and Woolsey No. 1 wells indicate that the sequence of sedimentary rocks in the Salton Sea geothermal field from the surface to below 4000 ft can be divided into three categories: cap rock, unaltered reservoir rocks, and hydrothermally altered reservoir rocks. The cap rock extends from the surface to a depth of approximately 1100 ft in all three wells. There is evidence to suggest that the cap rock has undergone self-sealing through time as a result of the circulation of hot brine through the rocks. Essentially unaltered reservoir rocks extend from a depth of 1100 ft to approximately 3000 ft. The mineralogical and textural changes that occur at depth can be attributed to the process of hydrothermal alteration. Alteration has occurred in a chemically open system and the important variables in the alteration scheme have been temperature, permeability, brine composition, and rock composition. The transition from unaltered to altered reservoir rocks is marked by the replacement of calcite by epidote. The first appearance of epidote correlates reasonably well with the top of the alteration zone as determined in other studies by electric log analysis. Biotite and chlorite, potential indicators of alteration zones, are considered to be of detrital origin rather than hydrothermal origin. The primary effect of hydrothermal alteration on the reservoir rocks in the Salton Sea geothermal field has been the reduction of porosity and permeability with depth. Petrographic analysis indicates that porosity and permeability in the field is enhanced by the presence of fractures in shales. The geologic picture that emerges from spontaneous potential (SP) log correlation is that of a structural basin whose axis lies to the northwest of Magmamax No. 2. The data suggest that unaltered reservoir rocks on the periphery of the field offer good production possibilities.

  9. Hydrothermal Alteration in Submarine Basaltic Rocks from the Reykjanes Geothermal Field, Iceland. (Invited)

    Science.gov (United States)

    Zierenberg, R. A.; Schiffman, P.; Fowler, A. P.; Marks, N.; Fridleifsson, G.; Elders, W. A.

    2013-12-01

    The Iceland Deep Drilling Project (IDDP) is preparing to drill to 4-5 km in the Reykjanes Geothermal Field to sample geothermal fluids at supercritical temperature and pressure for power generation. The Reykjanes geothermal field is the on-land extension of the Reykjanes Ridge spreading center. The upper 1-2 kilometers drilled at Reykjanes are submarine basalts and basaltic sediments, hyalloclastites, and breccias, with an increasing proportion of basaltic intrusive rocks below 2 km depth. Geothermal fluids are evolved seawater with a composition similar to mid-ocean ridge hydrothermal systems. Zn- and Cu-rich sulfide scale, locally enriched in Au and Ag, are deposited in production pipes. The sulfide deposits are compositionally and isotopically similar to seafloor massive sulfides. In anticipation of deeper drilling, we have investigated the mineralogy and geochemistry of drill cuttings from a 3 km deep well (RN-17). The depth zoning of alteration minerals is similar to that described from other Icelandic geothermal fields, and is comparable to observed seafloor metamorphic gradients in ODP drill holes and ophiolites. Chlorite-epidote alteration occurs at depths >400 m and passes downhole through epidote-actinolite alteration and into amphibole facies (hornblende-calcic plagioclase) alteration below 2.5 km. Local zones of high temperature (>800°C), granoblastic-textured, pyroxene hornfels, are interpreted to form by contact metamorphism during dike/sill emplacement. Similar granoblasically altered basalts were recovered from the base of the sheeted dikes in IODP Hole 1256D. Downhole compositional variations of drill cuttings, collected every 50 m, suggest that rocks below ~ 2 km are little altered. Whole-rock oxygen isotope profiles are consistent with low water/rock ratios, but suggest that early stages of hydrothermal alteration included meteoric water-derived fluids. Strontium isotope profiles indicate more extensive exchange with seawater-derived fluids

  10. Full Moment Tensor Analysis Using First Motion Data at The Geysers Geothermal Field

    Science.gov (United States)

    Boyd, O.; Dreger, D. S.; Lai, V. H.; Gritto, R.

    2012-12-01

    Seismicity associated with geothermal energy production at The Geysers Geothermal Field in northern California has been increasing during the last forty years. We investigate source models of over fifty earthquakes with magnitudes ranging from Mw 3.5 up to Mw 4.5. We invert three-component, complete waveform data from broadband stations of the Berkeley Digital Seismic Network, the Northern California Seismic Network and the USA Array deployment (2005-2007) for the complete, six-element moment tensor. Some solutions are double-couple while others have substantial non-double-couple components. To assess the stability and significance of non-double-couple components, we use a suite of diagnostic tools including the F-test, Jackknife test, bootstrap and network sensitivity solution (NSS). The full moment tensor solutions of the studied events tend to plot in the upper half of the Hudson source type diagram where the fundamental source types include +CLVD, +LVD, tensile-crack, DC and explosion. Using the F-test to compare the goodness-of-fit values between the full and deviatoric moment tensor solutions, most of the full moment tensor solutions do not show a statistically significant improvement in fit over the deviatoric solutions. Because a small isotropic component may not significantly improve the fit, we include first motion polarity data to better constrain the full moment tensor solutions.

  11. Estimation of deepwater temperature and hydrogeochemistry of springs in the Takab geothermal field, West Azerbaijan, Iran.

    Science.gov (United States)

    Sharifi, Reza; Moore, Farid; Mohammadi, Zargham; Keshavarzi, Behnam

    2016-01-01

    Chemical analyses of water samples from 19 hot and cold springs are used to characterize Takab geothermal field, west of Iran. The springs are divided into two main groups based on temperature, host rock, total dissolved solids (TDS), and major and minor elements. TDS, electrical conductivity (EC), Cl(-), and SO4 (2-) concentrations of hot springs are all higher than in cold springs. Higher TDS in hot springs probably reflect longer circulation and residence time. The high Si, B, and Sr contents in thermal waters are probably the result of extended water-rock interaction and reflect flow paths and residence time. Binary, ternary, and Giggenbach diagrams were used to understand the deeper mixing conditions and locations of springs in the model system. It is believed that the springs are heated either by mixing of deep geothermal fluid with cold groundwater or low conductive heat flow. Mixing ratios are evaluated using Cl, Na, and B concentrations and a mass balance approach. Calculated quartz and chalcedony geothermometer give lower reservoir temperatures than cation geothermometers. The silica-enthalpy mixing model predicts a subsurface reservoir temperature between 62 and 90 °C. The δ(18)O and δD (δ(2)H) are used to trace and determine the origin and movement of water. Both hot and cold waters plot close to the local meteoric line, indicating local meteoric origin. PMID:26733417

  12. Relocation hypocenter of microearthquake using Markov Chain simulation: Case study on geothermal field

    Science.gov (United States)

    Adu, Nurlia; Indriati Retno, P.; Suharsono

    2016-02-01

    Monitoring of micro seismic activity in the geothermal field is useful to know the fracture controllers in the geothermal reservoir area. However, in determining the point of micro earthquake, hypocenters still contain inherent uncertainties due to several factors such as mismatches velocity model used by the actual subsurface conditions. For that reason, hypocenter relocation by Markov Chain method is used, to simulate the hypocenter point spatially based opportunities transition containing the principle of conditional probability. The purpose of this relocation is to improve the models of the hypocenter so that the interpretation of the subsurface structure is better. From the result of the relocation of using Markov Chain identified fault structures trending below the surface of the northeast-southwest (NE-SW) with approximately N38°E. This structure is suspected as the continuity of the structure in the surface. The depth of the hypocenter is located 758 m above mean sea level more than 800 m below mean sea level.

  13. Reactive geothermal transport simulations to study the formation mechanism of an impermeable barrier between acidic and neutral fluid zones in the Onikobe Geothermal Field, Japan

    Science.gov (United States)

    Todaka, Norifumi; Akasaka, Chitoshi; Xu, Tianfu; Pruess, Karsten

    2004-05-01

    Two types of fluids are encountered in the Onikobe geothermal reservoir (Japan): one is neutral and the other is acidic. It is hypothesized that acidic fluid might be upwelling along a fault zone from magma and that an impermeable barrier might be present between the acidic and neutral fluid zones. To test such a conceptual model and to study the geochemical behavior due to mixing of the two fluids, reactive geothermal transport simulations under both natural and production conditions were carried out using the code TOUGHREACT. Results indicate Mn-rich smectite precipitates near the mixing front. Precipitation of sphalerite and galena occurs in a similar region as the Mn-rich smectite. Precipitation of these minerals depends on pH and temperature. In addition, quartz, pyrite, and calcite precipitate in the shallow zone resulting in further development of caprock. The changes in porosity and permeability due to precipitation of Mn-rich smectite are small compared with that of quartz, calcite, and pyrite. However, the smectite precipitation is likely to fill open fractures and to form an impermeable barrier between acidic and neutral fluid regions. The simulated mineral assemblage is generally consistent with observations in the Onikobe field. The numerical simulations described here provide useful insight into geochemical behavior and formation of impermeable barriers from fluid mixing. The method presented in this paper may be useful in fundamental analysis of hydrothermal systems and in the exploration of geothermal reservoirs, including chemical evolution, mineral alteration, mineral scaling, and changes in porosity and permeability.

  14. Addendum to material selection guidelines for geothermal energy-utilization systems. Part I. Extension of the field experience data base. Part II. Proceedings of the geothermal engineering and materials (GEM) program conference (San Diego, CA, 6-8 October 1982)

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.S.; Ellis, P.F. II

    1983-05-01

    The extension of the field experience data base includes the following: key corrosive species, updated field experiences, corrosion of secondary loop components or geothermal binary power plants, and suitability of conventional water-source heat pump evaporator materials for geothermal heat pump service. Twenty-four conference papers are included. Three were abstracted previously for EDB. Separate abstracts were prepared for twenty-one. (MHR)

  15. Internal structure of fault zones in geothermal reservoirs: Examples from palaeogeothermal fields and potential host rocks

    Science.gov (United States)

    Leonie Philipp, Sonja; Reyer, Dorothea; Meier, Silke; Bauer, Johanna F.; Afşar, Filiz

    2014-05-01

    Fault zones commonly have great effects on fluid transport in geothermal reservoirs. During fault slip all the pores and small fractures that meet with the slip plane become interconnected so that the inner part of the fault, the fault core, consisting of breccia or gouge, may suddenly develop a very high permeability. This is evidenced, for example by networks of mineral veins in deeply eroded fault zones in palaeogeothermal fields. Inactive faults, however, may have low permeabilities and even act as flow barriers. In natural and man-made geothermal reservoirs, the orientation of fault zones in relation to the current stress field and their internal structure needs be known as accurately as possible. One reason is that the activity of the fault zone depends on its angle to the principal stress directions. Another reason is that the outer part of a fault zone, the damage zone, comprises numerous fractures of various sizes. Here we present field examples of faults, and associated joints and mineral veins, in palaeogeothermal fields, and potential host rocks for man-made geothermal reservoirs, respectively. We studied several localities of different stratigraphies, lithologies and tectonic settings: (1) 58 fault zones in 22 outcrops from Upper Carboniferous to Upper Cretaceous in the Northwest German Basin (siliciclastic, carbonate and volcanic rocks); (2) 16 fault zones in 9 outcrops in Lower Permian to Middle Triassic (mainly sandstone, limestone and granite) in the Upper Rhine Graben; and (3) 74 fault zones in two coastal sections of Upper Triassic and Lower Jurassic age (mudstones and limestone-marl alternations) in the Bristol Channel Basin, UK. (1) and (2) are outcrop analogues of geothermal reservoir horizons, (3) represent palaeogeothermal fields with mineral veins. The field studies in the Northwest German Basin (1) show pronounced differences between normal-fault zones in carbonate and clastic rocks. In carbonate rocks clear damage zones occur that are

  16. Ambient Seismic Noise Monitoring for Stress-Induced Changes in Geysers Geothermal Field, California

    Science.gov (United States)

    Lai, V.; Taira, T.; Dreger, D. S.

    2013-12-01

    The Geysers Geothermal Field in California is one of the most seismically active zones in North America. We investigate the temporal change of the stress field within this region, by analyzing the small perturbations of the velocity structure through the correlations of ambient seismic noise. Vertical component of the continuous record of seismic noise for over 12 months are obtained from an array of seismic stations operated by the Lawrence Berkeley National Laboratory (LBNL). This network contains 30 seismic stations distributed over the entire Geysers geothermal field with an average station distance of 2 to 3 km. This translates into 435 possible combinations of the station pair in which some pairs have overlapping paths that allow us to verify the consistency of the Green's function along the same path. The procedure of the study includes computing hourly cross-correlations of the seismic noise of each station pair and stacking these hourly data into 1-day and subsequently 30-day stacks to obtain a reference Green's function (RGF) with high signal to noise ratio. Overlapping time windows are used to reduce any dependencies or effects of high amplitude transient signals. The relative travel time shift between the RGF and the 30-day stacked correlations in the frequency range from 0.1 to 0.9Hz is measured in which the value obtained is the opposite value of the relative velocity change of the structure. We are particularly interested in detecting temporal changes in seismic velocity structure accompanying tectonic events and fluid injections. To ensure the reliability of our correlations and to account for problematic data, we also perform a synthetic noise analysis by calculating the mean correlation coefficient (R-value) between the reference Green's function and data of varied durations. Correlations, which have an R-value below 0.9, are removed from the analysis.

  17. Hydrogeochemistry of the thermal waters from the Yenice Geothermal Field (Denizli Basin, Southwestern Anatolia, Turkey)

    Science.gov (United States)

    Alçiçek, Hülya; Bülbül, Ali; Alçiçek, Mehmet Cihat

    2016-01-01

    The chemical and isotopic properties of thermal waters (Kamara and Çizmeli) and cold springs from the Yenice Geothermal Field (YGF), in southwestern Anatolia, Turkey are investigated in order to establish a conceptual hydrogeochemical-hydrogeological model. These thermal waters derive from Menderes metamorphic rocks and emerge along normal faults; they are commonly used for heating of greenhouses and bathing facilities. Discharge temperatures of thermal waters are 32 °C to 57 °C (mean 51 °C) for Kamara and 35 °C to 68 °C (mean 47 °C) for Çizmeli, whereas deep groundwaters are 15 °C to 20.1 °C (mean 17 °C) and shallow groundwaters are 12 to 16 °C (mean 15 °C). Kamara and Çizmeli thermal waters are mostly of Na-Ca-HCO3-SO4 type, whereas deep groundwaters are Ca-Mg-HCO3 and Mg-Ca-HCO3 types and shallow groundwaters are mainly Mg-Ca-SO4-HCO3 and Ca-Mg-HCO3 types. In the reservoir of the geothermal system, dissolution of host rock and ion-exchange reactions changes thermal water types. High correlation in some ionic ratios (e.g. Na vs. Cl, K vs. Cl, HCO3 vs. Cl) and high concentrations of some minor elements (e.g., As, Sr, B, Cl, F) in thermal waters likely derive from enhanced water-rock interaction. Water samples from YGF have not reached complete chemical re-equilibrium, possibly as a result mixing with groundwater during upward flow. Geothermal reservoir temperatures are calculated as 89-102 °C for Kamara and 87-102 °C for Çizmeli fields, based on the retrograde and prograde solubilities of anhydrite and chalcedony. Based on the isotope and chemical data, a conceptual hydrogeochemical-hydrogeological model of the YGF has been constructed. Very negative δ18O and δ2H isotopic ratios (Kamara: mean of - 8.43‰ and - 56.9‰, respectively and Çizmeli: mean of - 7.96‰ and - 53.7‰, respectively) and low tritium values (< 1 TU) reflect a deep circulation pathway and a meteoric origin. Subsequent heating by conduction in the high geothermal gradient

  18. Stable isotopes as signposts of fluid throughput in Rotokawa and other geothermal fields, and the difficulty of identifying magmatic fingerprints

    International Nuclear Information System (INIS)

    We present a background for water-rock interaction generally, and new data on the Rotokawa geothermal field. The oxygen isotope shift of total rock samples allow the deduction of past flowpaths and total fluid throughput. Estimates of any input true exsolved magmatic water are difficult as the lithosphere can act as an effective isotopic screen. (authors). 1 fig., 6 refs

  19. Guidebook to Geothermal Finance

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, J. P.; Meurice, J.; Wobus, N.; Stern, F.; Duaime, M.

    2011-03-01

    This guidebook is intended to facilitate further investment in conventional geothermal projects in the United States. It includes a brief primer on geothermal technology and the most relevant policies related to geothermal project development. The trends in geothermal project finance are the focus of this tool, relying heavily on interviews with leaders in the field of geothermal project finance. Using the information provided, developers and investors may innovate in new ways, developing partnerships that match investors' risk tolerance with the capital requirements of geothermal projects in this dynamic and evolving marketplace.

  20. Pressure changes and their effects on the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Bermejo M, F.J.; Navarro O, F.X.; Esquer P, C.A.; Castillo B, F.; de la Cruz D, F.C.

    1981-01-01

    Continuous extraction of the water-steam mixture at the field has been increasing to fulfill the steam requirements of the power plant. As a result, pressure declines have been observed in the producing strata in all of the wells, as well as in the geothermal reservoir as a whole. Anomalous behavior that has been observed in the wells' hydraulic columns in most cases is due to the interconnection of the various strata penetrated by the well. When this occurs, unbalanced hydraulic pressures cause the movement of fluids between the strata. As an example of this hydraulic imbalance causing the flow of fluids from an upper to a lower zone, well Nuevo Leon 1 where this effect occurs between regions 600 m apart was chosen.

  1. Reservoir-scale fracture permeability in the Dixie Valley, Nevada, geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Barton, C.A.; Zoback, M.D. [Stanford Univ., CA (United States). Dept. of Geophysics; Hickman, S. [Geological Survey, Menlo Park, CA (United States); Morin, R. [Geological Survey, Denver, CO (United States); Benoit, D. [Oxbow Geothermal Corp., Reno, NV (United States)

    1998-08-01

    Wellbore image data recorded in six wells penetrating a geothermal reservoir associated with an active normal fault at Dixie Valley, Nevada, were used in conjunction with hydrologic tests and in situ stress measurements to investigate the relationship between reservoir productivity and the contemporary in situ stress field. The analysis of data from wells drilled into productive and non-productive segments of the Stillwater fault zone indicates that fractures must be both optimally oriented and critically stressed to have high measured permeabilities. Fracture permeability in all wells is dominated by a relatively small number of fractures oriented parallel to the local trend of the Stillwater Fault. Fracture geometry may also play a significant role in reservoir productivity. The well-developed populations of low angle fractures present in wells drilled into the producing segment of the fault are not present in the zone where production is not commercially viable.

  2. Hydrogeochemical and isotopic characteristics of Kavak (Seydişehir-Konya) geothermal field, Turkey

    Science.gov (United States)

    Bozdağ, Ayla

    2016-09-01

    The Kavak geothermal field is located 13 km north of Seydişehir town, about 90 km southwest of Konya Province in the Central Anatolia, Turkey. This study was carried out to determine the origin, chemical characteristics, and isotopic composition of Kavak thermal waters. The measured temperatures of thermal and mineral waters range from 21.5 to 26 °C with a discharge of 0.8 l/s in springs, and from 30 to 45.8 °C with a discharge of 185 l/s in wells. Thermal and/or mineralized spring and well waters are of Casbnd Nasbnd HCO3 types with electrical conductivity ranging from 2530 to 4150 μS/cm while cold groundwater is mainly of Casbnd HCO3 and Casbnd Mgsbnd HCO3 types with electrical conductivity ranging from 446 to 668 μS/cm. Kavak thermal waters have not reached complete chemical re-equilibrium possibly as a result of mixing with cold water during upward flow. Assessments from quartz geothermometers and fluid-mineral equilibria calculations suggest that reservoir temperature of Kavak geothermal field ranges from 68 to 105 °C. Thermal waters are oversaturated at discharge temperatures for calcite, dolomite, and aragonite minerals corresponding to travertine precipitation in the discharge area. Gypsum and anhydrite minerals are undersaturated in all the thermal waters. The δ18O and δ2H compositions of Kavak thermal and cold waters point to a meteoric origin. Meteoric waters infiltrate the reservoir rocks along faults and fracture zones. After being heated at depth with the high geothermal gradient, they move up to the surface along faults and fractures that act as pathways. Additionally, δ18O and δ2H values suggest that thermal waters are recharged from higher elevations in comparison with cold waters. Long-term circulation of meteoric waters within the basement rocks is indicated by low tritium (<2 TU) values in the thermal waters, although the fluids do not achieve thermodynamic equilibrium. Based on the δ13C values, carbon in thermal waters is considered

  3. Hydrogeochemical and isotopic characteristics of Kavak (Seydişehir-Konya) geothermal field, Turkey

    Science.gov (United States)

    Bozdağ, Ayla

    2016-09-01

    The Kavak geothermal field is located 13 km north of Seydişehir town, about 90 km southwest of Konya Province in the Central Anatolia, Turkey. This study was carried out to determine the origin, chemical characteristics, and isotopic composition of Kavak thermal waters. The measured temperatures of thermal and mineral waters range from 21.5 to 26 °C with a discharge of 0.8 l/s in springs, and from 30 to 45.8 °C with a discharge of 185 l/s in wells. Thermal and/or mineralized spring and well waters are of Casbnd Nasbnd HCO3 types with electrical conductivity ranging from 2530 to 4150 μS/cm while cold groundwater is mainly of Casbnd HCO3 and Casbnd Mgsbnd HCO3 types with electrical conductivity ranging from 446 to 668 μS/cm. Kavak thermal waters have not reached complete chemical re-equilibrium possibly as a result of mixing with cold water during upward flow. Assessments from quartz geothermometers and fluid-mineral equilibria calculations suggest that reservoir temperature of Kavak geothermal field ranges from 68 to 105 °C. Thermal waters are oversaturated at discharge temperatures for calcite, dolomite, and aragonite minerals corresponding to travertine precipitation in the discharge area. Gypsum and anhydrite minerals are undersaturated in all the thermal waters. The δ18O and δ2H compositions of Kavak thermal and cold waters point to a meteoric origin. Meteoric waters infiltrate the reservoir rocks along faults and fracture zones. After being heated at depth with the high geothermal gradient, they move up to the surface along faults and fractures that act as pathways. Additionally, δ18O and δ2H values suggest that thermal waters are recharged from higher elevations in comparison with cold waters. Long-term circulation of meteoric waters within the basement rocks is indicated by low tritium (waters, although the fluids do not achieve thermodynamic equilibrium. Based on the δ13C values, carbon in thermal waters is considered as originating from a mixture

  4. Group II Xenoliths from Lunar Crater Volcanic Field, Central Nevada: Evidence for a Kinked Geotherm

    Science.gov (United States)

    Roden, M.; Mosely, J.; Norris, J.

    2015-12-01

    Group II xenoliths associated with the 140 Ka Easy Chair Crater, Lunar Crater volcanic field, NV, consist of amphibole rich-inclusions including amphibolites, pyroxenites, and gabbros. Abundant minerals in these inclusions are kaersutite, aluminous (7.3-9.7 wt% Al2O3), calcic clinopyroxene, primarily diopside, and olivine (Mg# 69-73) with accessory spinel, sulfide and apatite. Although most apatites are fluor-hydroxyapatite solid solutions, one xenolith contains Cl- and OH-rich apatite suggesting that Cl may have been an important constituent in the parent magma(s) . The xenoliths show abundant evidence for equilibration at relatively low temperatures including amphibole and orthopyroxene exsolution in clinopyroxene, and granules of magnetite in hercynite hosts. If latter texture is due to exsolution, then this particular Group II xenolith equilibrated at temperatures near or below 500oC or at a depth of about 15 km along a conductive geotherm. It may be that all the Group II xenoliths equilibrated at low temperatures given the abundant exsolution textures although Fe-Mg exchange relations suggest equilibration at temperatures in excess of 800oC. Low equilibration temperatures are in conflict with the unusually high equilibration temperatures, >1200oC (Smith, 2000) displayed by Group I xenoliths from this same volcanic field. Taken at face value, the geothermometric results indicate unusually high temperatures in the upper mantle, normal temperatures in the crust and the possibility of a kinked geotherm in the region. Curiously the LCVF lies in an area of "normal" heat flow, south of the Battle Mountain area of high heat flow but the number of heat flow measurements in the Lunar Crater area is very low (Humphreys et al., 2003; Sass, 2005). References: Humphreys et al., 2003, Int. Geol. Rev. 45: 575; Sass et al., 2005, http://pubs.usgs.gov/of/2005/1207/; Smith, 2000, JGR 105: 16769.

  5. A comparison of long-term changes in seismicity at The Geysers, Salton Sea, and Coso geothermal fields

    Science.gov (United States)

    Trugman, Daniel T.; Shearer, Peter M.; Borsa, Adrian A.; Fialko, Yuri

    2016-01-01

    Geothermal energy is an important source of renewable energy, yet its production is known to induce seismicity. Here we analyze seismicity at the three largest geothermal fields in California: The Geysers, Salton Sea, and Coso. We focus on resolving the temporal evolution of seismicity rates, which provides important observational constraints on how geothermal fields respond to natural and anthropogenic loading. We develop an iterative, regularized inversion procedure to partition the observed seismicity rate into two components: (1) the interaction rate due to earthquake-earthquake triggering and (2) the smoothly varying background rate controlled by other time-dependent stresses, including anthropogenic forcing. We apply our methodology to compare long-term changes in seismicity to monthly records of fluid injection and withdrawal. At The Geysers, we find that the background seismicity rate is highly correlated with fluid injection, with the mean rate increasing by approximately 50% and exhibiting strong seasonal fluctuations following construction of the Santa Rosa pipeline in 2003. In contrast, at both Salton Sea and Coso, the background seismicity rate has remained relatively stable since 1990, though both experience short-term rate fluctuations that are not obviously modulated by geothermal plant operation. We also observe significant temporal variations in Gutenberg-Richter b value, earthquake magnitude distribution, and earthquake depth distribution, providing further evidence for the dynamic evolution of stresses within these fields. The differing field-wide responses to fluid injection and withdrawal may reflect differences in in situ reservoir conditions and local tectonics, suggesting that a complex interplay of natural and anthropogenic stressing controls seismicity within California's geothermal fields.

  6. New chemical and original isotopic data on waters from El Tatio geothermal field, Northern Chile

    International Nuclear Information System (INIS)

    The El Tatio geothermal field is located at an height of 4200-4300 m on the Cordillera de los Andes (Altiplano). Geysers, hot pools and mudpots in the geothermal field and local meteoric waters were sampled in April 2002 and analyzed for major and trace elements, δ2H, δ18O and 3H of water, δ34S and δ18O of dissolved sulfate, δ13C of dissolved total carbonate, and 87Sr/86Sr ratio of aqueous strontium. There are two different types of thermal springs that field, that are chloride-rich water and sulfate-rich water. The chemical composition of chloride springs is controlled by magma degassing and by water-rock interaction processes. Sulfate springs are fed by shallow meteoric water heated by ascending gases. In keeping with the geodynamic setting and nature of the reservoir rocks, chloride water is rich in As, B, Cs, Li; on the other hand, sulfate waste is enriched only in B relative to local meteoric water. Alternatively to a merely meteoric model, chloride waters can be interpreted as admixtures of meteoric and magmatic (circa andesitic) water, which moderately exchanges oxygen isotopes with rocks at a chemical Na/K temperature of about 270degC in the main reservoir, and then undergoes loss of vapor (and eventually mixing with shallow water) and related isotopic effects ascent to the surface. These chloride waters do not present tritium and can be classified as submodern (pre-1952). A chloride content of 5,400 mg/l is estimated in the main reservoir, for which δ2H and δ18O values, respectively of -78 per mille and -6.9 per mille, are calculated applying the multistage-steam separation isotopic effects between liquid and vapor. From these data, the meteoric recharge (Cl≅0 mg/l) of the main reservoir should approach a composition of -107 per mille in δ2H and -14.6 per mille in δ18O, when a magmatic water of δ2H=-20 per mille, δ18O=+10 per mille and Cl=17,500 mg/l is assumed. The 87Sr/86 ratios of the hot springs are quite uniform (0.70876 to 0.70896), with

  7. The structural architecture of the Los Humeros volcanic complex and geothermal field, Trans-Mexican Volcanic Belt, Central Mexico

    Science.gov (United States)

    Norini, Gianluca; Groppelli, Gianluca; Sulpizio, Roberto; Carrasco Núñez, Gerardo; Davila Harris, Pablo

    2014-05-01

    The development of geothermal energy in Mexico is a very important goal, given the presence of a large heat anomaly, associated with the Trans-Mexican Volcanic Belt, the renewability of the resource and the low environmental impact. The Quaternary Los Humeros volcanic complex is an important geothermal target, whose evolution involved at least two caldera events, that alternated with other explosive and effusive activity. The first caldera forming event was the 460 ka eruption that produced the Xaltipan ignimbrite and formed a 15-20 km wide caldera. The second collapse event occurred 100 ka with the formation of the Zaragoza ignimbrite and a nested 8-10 km wide caldera. The whole volcano structure, the style of the collapses and the exact location of the calderas scarps and ring faults are still a matter of debate. The Los Humeros volcano hosts the productive Los Humeros Geothermal Field, with an installed capacity of 40 MW and additional 75 MW power plants under construction. Recent models of the geothermal reservoir predict the existence of at least two reservoirs in the geothermal system, separated by impermeable rock units. Hydraulic connectivity and hydrothermal fluids circulation occurs through faults and fractures, allowing deep steam to ascend while condensate flows descend. As a consequence, the plans for the exploration and exploitation of the geothermal reservoir have been based on the identification of the main channels for the circulation of hydrothermal fluids, constituted by faults, so that the full comprehension of the structural architecture of the caldera is crucial to improve the efficiency and minimize the costs of the geothermal field operation. In this study, we present an analysis of the Los Humeros volcanic complex focused on the Quaternary tectonic and volcanotectonics features, like fault scarps and aligned/elongated monogenetic volcanic centres. Morphostructural analysis and field mapping reveal the geometry, kinematics and dynamics of

  8. Niland development project geothermal loan guaranty: 49-MW (net) power plant and geothermal well field development, Imperial County, California: Environmental assessment

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    The proposed federal action addressed by this environmental assessment is the authorization of disbursements under a loan guaranteed by the US Department of Energy for the Niland Geothermal Energy Program. The disbursements will partially finance the development of a geothermal well field in the Imperial Valley of California to supply a 25-MW(e) (net) power plant. Phase I of the project is the production of 25 MW(e) (net) of power; the full rate of 49 MW (net) would be achieved during Phase II. The project is located on approximately 1600 acres (648 ha) near the city of Niland in Imperial County, California. Well field development includes the initial drilling of 8 production wells for Phase I, 8 production wells for Phase II, and the possible need for as many as 16 replacement wells over the anticipated 30-year life of the facility. Activities associated with the power plant in addition to operation are excavation and construction of the facility and associated systems (such as cooling towers). Significant environmental impacts, as defined in Council on Environmental Quality regulation 40 CFR Part 1508.27, are not expected to occur as a result of this project. Minor impacts could include the following: local degradation of ambient air quality due to particulate and/or hydrogen sulfide emissions, temporarily increased ambient noise levels due to drilling and construction activities, and increased traffic. Impacts could be significant in the event of a major spill of geothermal fluid, which could contaminate groundwater and surface waters and alter or eliminate nearby habitat. Careful land use planning and engineering design, implementation of mitigation measures for pollution control, and design and implementation of an environmental monitoring program that can provide an early indication of potential problems should ensure that impacts, except for certain accidents, will be minimized.

  9. Isotope and geochemical study of the geothermal fields of Chios Island, Greece

    International Nuclear Information System (INIS)

    Full text: The study area is located in the west part of Aegean sea, in the Chios Island. Chios is characterised by a strong geothermal activity especially in the area of Aghia Eleni and Agiasmata where the temperature ranges from 26 - 54 deg. C. In the framework of a 1998-2001 bilateral research programme between Italy and Greece, geochemical and isotope investigations were conducted on spring and water wells of Chios in order to improve the knowledge on the geothermal potential of the island. A number of hydrothermal manifestations were found in the northern and southeastern parts of the island, namely in the areas of Nenita-Thimiana, Patrika, Aghia Eleni and Aghiasmata. In the plain of Nenita the outcropping formation is entirely constituted of neogene fluvio-lacustrine deposits which act as the impervious cover of the underlying hydrothermal acquifer. The springs of Aghiasmata issue from the lower-middle Miocene volcanic formations. Groundwater samples from boreholes and springs were collected and analysed for major cations and anions (Cl-, NO3-, SO42-, Na+, K+, Ca2+ and Mg2+), for stable isotopes of water (18O and D), and aqueous sulphate [18O(SO42-) and 34S]. Moreover temperature, conductivity and pH are measured in the field. A study of ionic and isotopic contents shows that thermal springs (Aghia Eleni and Aghiasmata) of Chios Island are fed by seawater. In the case of Aghia Eleni the big marine contribution (89%) disturbs the chemical and isotopic geothermometers. In the case of Aghiasmata the geothermometers suggested equilibrium temperature near 200 deg. C. For the boreholes of the southern part of the island the initial temperature is estimated in the order of 80-90 deg. C. (author)

  10. Assessing Past Fracture Connectivity in Geothermal Reservoirs Using Clumped Isotopes: Proof of Concept in the Blue Mountain Geothermal Field, Nevada USA

    Science.gov (United States)

    Huntington, K. W.; Sumner, K. K.; Camp, E. R.; Cladouhos, T. T.; Uddenberg, M.; Swyer, M.; Garrison, G. H.

    2015-12-01

    Subsurface fluid flow is strongly influenced by faults and fractures, yet the transmissivity of faults and fractures changes through time due to deformation and cement precipitation, making flow paths difficult to predict. Here we assess past fracture connectivity in an active hydrothermal system in the Basin and Range, Nevada, USA, using clumped isotope geochemistry and cold cathodoluminescence (CL) analysis of fracture filling cements from the Blue Mountain geothermal field. Calcite cements were sampled from drill cuttings and two cores at varying distances from faults. CL microscopy of some of the cements shows banding parallel to the fracture walls as well as brecciation, indicating that the cements record variations in the composition and source of fluids that moved through the fractures as they opened episodically. CL microscopy, δ13C and δ18O values were used to screen homogeneous samples for clumped isotope analysis. Clumped isotope thermometry of most samples indicates paleofluid temperatures of around 150°C, with several wells peaking at above 200°C. We suggest that the consistency of these temperatures is related to upwelling of fluids in the convective hydrothermal system, and interpret the similarity of the clumped isotope temperatures to modern geothermal fluid temperatures of ~160-180°C as evidence that average reservoir temperatures have changed little since precipitation of the calcite cements. In contrast, two samples, one of which was associated with fault gauge observed in drill logs, record significantly cooler temperatures of 19 and 73°C and anomalous δ13C and δ18Owater values, which point to fault-controlled pathways for downwelling meteoric fluid. Finally, we interpret correspondence of paleofluid temperatures and δ18Owater values constrained by clumped isotope thermometry of calcite from different wells to suggest past connectivity of fractures among wells within the geothermal field. Results show the ability of clumped isotope

  11. Kegiatan Storytelling dalam Meningkatkan Minat Baca Anak pada Perpustakaan Soeman Hs Provinsi Riau

    OpenAIRE

    Dewi, Sri Terta

    2015-01-01

    Penelitian dilakukan di Perpustakaan Soeman Hs Provinsi Riau. Tujuan dari penelitian adalah untuk mengetahui: persiapan kegiatan storytelling, proses kegiatan storytelling saat berlangsung dan setelah kegiatan dilakukan, teknik-teknik yang digunakan dalam kegiatan storytelling, dan minat baca anak setelah mengikuti kegiatan storytelling yang dilakukan di Perpustakaan Soeman Hs Provinsi Riau Metode yang digunakan adalah deskriptif. responden penelitian adalah guru-guru yang mendampingi anak...

  12. Salton Sea Geothermal Field, California, as a near-field natural analog of a radioactive waste repository in salt

    International Nuclear Information System (INIS)

    Since high concentrations of radionuclides and high temperatures are not normally encountered in salt domes or beds, finding an exact geologic analog of expected near-field conditions in a mined nuclear waste repository in salt will be difficult. The Salton Sea Geothermal Field, however, provides an opportunity to investigate the migration and retardation of naturally occurring U, Th, Ra, Cs, Sr and other elements in hot brines which have been moving through clay-rich sedimentary rocks for up to 100,000 years. The more than thirty deep wells drilled in this field to produce steam for electrical generation penetrate sedimentary rocks containing concentrated brines where temperatures reach 3650C at only 2 km depth. The brines are primarily Na, K, Ca chlorides with up to 25% of total dissolved solids; they also contain high concentrations of metals such as Fe, Mn, Li, Zn, and Pb. This report describes the geology, geophysics and geochemistry of this system as a prelude to a study of the mobility of naturally occurring radionuclides and radionuclide analogs within it. The aim of this study is to provide data to assist in validating quantitative models of repository behavior and to use in designing and evaluating waste packages and engineered barriers. 128 references, 33 figures, 13 tables

  13. Salton Sea Geothermal Field, California, as a near-field natural analog of a radioactive waste repository in salt

    Energy Technology Data Exchange (ETDEWEB)

    Elders, W.A.; Cohen, L.H.

    1983-11-01

    Since high concentrations of radionuclides and high temperatures are not normally encountered in salt domes or beds, finding an exact geologic analog of expected near-field conditions in a mined nuclear waste repository in salt will be difficult. The Salton Sea Geothermal Field, however, provides an opportunity to investigate the migration and retardation of naturally occurring U, Th, Ra, Cs, Sr and other elements in hot brines which have been moving through clay-rich sedimentary rocks for up to 100,000 years. The more than thirty deep wells drilled in this field to produce steam for electrical generation penetrate sedimentary rocks containing concentrated brines where temperatures reach 365/sup 0/C at only 2 km depth. The brines are primarily Na, K, Ca chlorides with up to 25% of total dissolved solids; they also contain high concentrations of metals such as Fe, Mn, Li, Zn, and Pb. This report describes the geology, geophysics and geochemistry of this system as a prelude to a study of the mobility of naturally occurring radionuclides and radionuclide analogs within it. The aim of this study is to provide data to assist in validating quantitative models of repository behavior and to use in designing and evaluating waste packages and engineered barriers. 128 references, 33 figures, 13 tables.

  14. Allometric constraints on Sr/Ca and Ba/Ca partitioning in terrestrial mammalian trophic chains.

    Science.gov (United States)

    Balter, Vincent

    2004-03-01

    In biological systems, strontium (Sr) and barium (Ba) are two non-essential elements, in comparison to calcium (Ca) which is essential. The Sr/Ca and Ba/Ca ratios tend to decrease in biochemical pathways which include Ca as an essential element, and these processes are termed biopurification of Ca. The quantitative pathway of the biopurification of Ca in relation to Sr and Ba between two biological reservoirs ( Rn and R(n -1)) is measured with an observed ratio (OR) expressed by the (Sr/Ca) Rn /(Sr/Ca)( Rn-1) and (Ba/Ca) Rn /(Ba/Ca)( Rn-1) ratios. For a mammalian organism, during the whole biopurification of Ca starting with the diet to the ultimate reservoir of Ca which is the bone, the mean values for ORSr and ORBa are 0.25 and 0.2, respectively. In this study, published Sr/Ca and Ba/Ca ratios are used for three sets of soils, plants, and bones of herbivorous and carnivorous mammals, each comprising a trophic chain, to illustrate the biopurification of Ca at the level of trophic chains. Calculated ORSr and ORBa of herbivore bones in relation to plants and of bones of carnivores in relation to bones of herbivores give ORSr=0.30+/-0.08 and ORBa=0.16+/-0.08, thus suggesting that trophic chains reflect the Sr/Ca and Ba/Ca fluxes that are prevalent at the level of a mammalian organism. The slopes of the three regression equations of log(Sr/Ca) vs. log(Ba/Ca) are similar, indicating that the process of biopurification of Ca with respect to Sr and Ba is due to biological processes and is independent of the geological settings. Modifications of the logarithmic expression of the Sr/Ca and Ba/Ca relationship allow a new formula of the biopurification process to be deduced, leading to the general equation ORBa=ORSr(1.79+/-0.33), where the allometric coefficient is the mean of the slopes of the three regression equations. Some recent examples are used to illustrate this new analysis of predator-prey relations between mammals. This opens up new possibilities for the

  15. Recover Act. Verification of Geothermal Tracer Methods in Highly Constrained Field Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Matthew W. [California State University, Long Beach, CA (United States)

    2014-05-16

    The prediction of the geothermal system efficiency is strong linked to the character of the flow system that connects injector and producer wells. If water flow develops channels or “short circuiting” between injection and extraction wells thermal sweep is poor and much of the reservoir is left untapped. The purpose of this project was to understand how channelized flow develops in fracture geothermal reservoirs and how it can be measured in the field. We explored two methods of assessing channelization: hydraulic connectivity tests and tracer tests. These methods were tested at a field site using two verification methods: ground penetrating radar (GPR) images of saline tracer and heat transfer measurements using distributed temperature sensing (DTS). The field site for these studies was the Altona Flat Fractured Rock Research Site located in northeastern New York State. Altona Flat Rock is an experimental site considered a geologic analog for some geothermal reservoirs given its low matrix porosity. Because soil overburden is thin, it provided unique access to saturated bedrock fractures and the ability image using GPR which does not effectively penetrate most soils. Five boreholes were drilled in a “five spot” pattern covering 100 m2 and hydraulically isolated in a single bedding plane fracture. This simple system allowed a complete characterization of the fracture. Nine small diameter boreholes were drilled from the surface to just above the fracture to allow the measurement of heat transfer between the fracture and the rock matrix. The focus of the hydraulic investigation was periodic hydraulic testing. In such tests, rather than pumping or injection in a well at a constant rate, flow is varied to produce an oscillating pressure signal. This pressure signal is sensed in other wells and the attenuation and phase lag between the source and receptor is an indication of hydraulic connection. We found that these tests were much more effective than constant

  16. Geothermal Resources in Spain; Recurssos geothermicos en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Garcia de la Noceda Marquez, C.

    2009-07-01

    A general view on the geothermal resources is presented and the basic concepts of geothermal fields and their classification, the different possibilities of geothermal energy utilization as well as a general panoramic of geothermal energy in Spain. (Author) 6 refs.

  17. Membrane Topology and Biochemical Characterization of the Escherichia coli BacA Undecaprenyl-Pyrophosphate Phosphatase.

    Directory of Open Access Journals (Sweden)

    Guillaume Manat

    Full Text Available Several integral membrane proteins exhibiting undecaprenyl-pyrophosphate (C55-PP phosphatase activity were previously identified in Escherichia coli that belonged to two distinct protein families: the BacA protein, which accounts for 75% of the C55-PP phosphatase activity detected in E. coli cell membranes, and three members of the PAP2 phosphatidic acid phosphatase family, namely PgpB, YbjG and LpxT. This dephosphorylation step is required to provide the C55-P carrier lipid which plays a central role in the biosynthesis of various cell wall polymers. We here report detailed investigations of the biochemical properties and membrane topology of the BacA protein. Optimal activity conditions were determined and a narrow-range substrate specificity with a clear preference for C55-PP was observed for this enzyme. Alignments of BacA protein sequences revealed two particularly well-conserved regions and several invariant residues whose role in enzyme activity was questioned by using a site-directed mutagenesis approach and complementary in vitro and in vivo activity assays. Three essential residues Glu21, Ser27, and Arg174 were identified, allowing us to propose a catalytic mechanism for this enzyme. The membrane topology of the BacA protein determined here experimentally did not validate previous program-based predicted models. It comprises seven transmembrane segments and contains in particular two large periplasmic loops carrying the highly-conserved active site residues. Our data thus provide evidence that all the different E. coli C55-PP phosphatases identified to date (BacA and PAP2 catalyze the dephosphorylation of C55-PP molecules on the same (outer side of the plasma membrane.

  18. Hydrochemical and isotopic studies in Aksaray geothermal fields central Anatolia, Turkey

    International Nuclear Information System (INIS)

    The studied area is located at eastern part of Aksaray province in Central Anatolia. The basement rocks of studied area is Paleozoic aged Bozcaldag formation composed of marble, schist and gneiss and Cretaseous aged granitoid intrusion intrude within these basement rocks. These rock units are overlain uncomfortably by middle miocene to Quaternary aged volcanic rocks of Cappadocian volcanic belt interlayer sediments. The compositions of these units are mainly represented by tuff, ignimbrite, reworked tuff interlayer sediments, basalt lavas, ash fall deposits, pumice and dasite to rhyodasitic lava domes.The study area contains Ziga and Acigoel (Narkoey) thermal area, which they have similar geologic environments with in the Cappadocian volcanic belt of the Tertiary to Quaternary age. Existence of surface manifestation like that high regional heat flow, the presence of expanding acidic to weakly acidic hydrothermal alteration surrounding the geothermal area, hot springs which have a temperature of 44-65 degrees indicating the important of geothermal possibilities in the area. Water chemistry studies have been carried out on 34 water samples to estimate relation between hot and cold water, calculate reservoir temperature using geothermometre and mixing models, hydrological isotope studies were carried out to on 10 samples to clarify extending of recharging area and travel time from recharging area to discharging area. Water analyses results were assested using some diagram such as Fournier Cl-Entalphy, SiO2-Entalphy, Langelier- Ludwig, Piper, schoeller etc to classify them. Water-rock interaction have been tried to be define on the base of these result.On the base of water chemistry analyses, all of the cold waters are Ca-Mg-HCO3 and CaHCO3 type. the hot waters in Ziga field classified as Na-Cl-HCO3 type and As and B bearing mineralized hot water. Geothermal fluids in Acigoel field, classified as Ca-Na-HCO3-Cl type and B bearing mineralized hot water, and

  19. Mineralogical and Geochemical Constraints on Arsenic Mobility in a Philippine Geothermal Field

    Institute of Scientific and Technical Information of China (English)

    Chelo PASCUA; Tsutomu SATO; Glenn GOLLA

    2006-01-01

    Arsenic is usually associated with sulphide minerals formed in the geothermal environment.However, sulphide minerals are prone to dissolution after contact with meteoric water under surface oxidizing conditions. Secondary precipitates that form from the dissolution of the primary sulfides exert a greater influence on arsenic mobility in the geothermal environment. Fe-hydroxides have very good affinity with dissolved arsenate and are stable under most surface oxidizing conditions. Both amorphous silica directly precipitated from geothermal fluids and possibly a kaolinite alteration can host a small significant amount of arsenic. These silicates are also more stable under a wide range of pH and redox conditions.

  20. Deformation near the Casa Diablo geothermal well field and related processes Long Valley caldera, Eastern California, 1993-2000

    Science.gov (United States)

    Howle, J.F.; Langbein, J.O.; Farrar, C.D.; Wilkinson, S.K.

    2003-01-01

    Regional first-order leveling lines, which extend from Lee Vining, CA, to Tom's Place, CA, have been surveyed periodically since 1957 by the U.S. Geological Survey (USGS), the National Geodetic Survey (NGS), and Caltrans. Two of the regional survey lines, or leveling networks, intersect at the Casa Diablo geothermal well field. These leveling networks, referenced to a distant bench mark (C916) near Lee Vining, provide time-series vertical control data of land-surface deformation that began around 1980. These data are also useful for delineating localized subsidence at Casa Diablo related to reservoir pressure and temperature changes owing to geothermal development that began in 1985. A comparison of differences in bench-mark elevations for five time periods between 1983 and 1997 shows the development and expansion of a subsidence bowl at Casa Diablo. The subsidence coincides spatially with the geothermal well field and temporally with the increased production rates and the deepening of injection wells in 1991, which resulted in an increase in the rate of pressure decline. The subsidence, superimposed on a broad area of uplift, totaled about 310 mm by 1997. The USGS established orthogonal tilt arrays in 1983 to better monitor deformation across the caldera. One tilt array (DBR) was established near what would later become the Casa Diablo geothermal well field. This array responded to magmatic intrusions prior to geothermal development, tilting away from the well field. With the start of geothermal fluid extraction in 1985, tilt at the DBR array reversed direction and began tilting into the well field. In 1991, geothermal power production was increased by a factor of four, and reservoir pressures began a period of steep decline. These changes caused a temporary three-fold increase in the tilt rate. The tilt rate became stable in 1993 and was about 40% lower than that measured in 1991-1992, but still greater than the rates measured during 1985-1990. Data from the

  1. World geothermal congress

    International Nuclear Information System (INIS)

    The World geothermal congress took place in the period from 28 May up to 10 June 2000 in Japan. About 2000 men from 43 countries, including specialists in the area of developing geothermal fields, creating and operating geothermal electrical and thermal plants and various systems for the earth heat application, participated in the work of the Congress. It was noted at the Congress, that development of the geothermal power engineering in the world is characterized by the large-scale application of geothermal resources for the electrical energy generation

  2. Differentiating induced and natural seismicity using space-time-magnitude statistics applied to the Coso Geothermal Field

    Science.gov (United States)

    Schoenball, Martin; Davatzes, Nicholas C.; Glen, Jonathan M. G.

    2016-04-01

    A remarkable characteristic of earthquakes is their clustering in time and space, displaying their self-similarity. It remains to be tested if natural and induced earthquakes share the same behavior. The Coso Geothermal Field is one of the most seismically active areas in California and features an abundance of natural seismicity due to active tectonics and a large number of induced earthquakes resulting from geothermal power production since 1987. We study natural and induced earthquakes comparatively in the same tectonic setting at the Coso Geothermal Field. Covering the pre- and co-production periods from 1981 to 2013, we analyze inter-event times, spatial dimension, and frequency-size distributions for natural and induced earthquakes. Individually, these distributions are statistically indistinguishable. Determining the distribution of nearest-neighbor distances in a combined space-time-magnitude metric lets us identify the triggering relationship of an earthquake pair. Nearest-neighbors pairs naturally fall into two populations that categorize it as either clustered (triggered) or background (independent) events. Compared to natural earthquakes, induced earthquakes feature a larger fraction of background seismicity. Furthermore, they contain a population of independent pairs at large magnitude-rescaled times and small magnitude-rescaled distances. Unlike tectonic processes, stress changes by the field operations occur on much smaller time scale and appear strong enough to drive small-scale faults through several seismic cycles. As a result, we record seismicity close to previous hypocenters after a period on the order of a year.

  3. Extension of the Cerro Prieto field and zones in the Mexicali Valley with geothermal possibilities in the future

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca L, H.L.; de la Pena L, A.; Puente C, I.; Diaz C, E.

    1981-01-01

    This study concerns the possible extension of the Cerro Prieto field and identification of other zones in the Mexicali Valley with geothermal development potential by assessing the structural geologic conditions in relation to the regional tectonic framework and the integration of geologic and geophysical surveys carried out at Cerro Prieto. This study is based on data obtained from the wells drilled to date and the available geological and geophysical information. With this information, a geologic model of the field is developed as a general description of the geometry of what might be the geothermal reservoir of the Cerro Prieto field. In areas with geothermal potential within the Mexicali Valley, the location of irrigation wells with anomalous temperatures was taken as a point of departure for subsequent studies. Based on this initial information, gravity and magnetic surveys were made, followed by seismic reflection and refraction surveys and the drilling of 1200-m-deep multiple-use wells. Based on the results of the final integration of these studies with the geology of the region, it is suggested that the following areas should be explored further: east of Cerro Prieto, Tulecheck, Riito, Aeropuerto-Algodones, and San Luis Rio Colorado, Sonora.

  4. Gas geothermometry in selected Icelandic geothermal fields with comparative examples from Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Ping [Academia Sinica, Beijing, BJ (China). Inst. of Geology; Armannsson, Halldor [Orkustofnun, Reykjavik (Iceland)

    1996-06-01

    Using data from selected geothermal fields in Iceland, several gas geothermometers are applied to calculate reservoir temperatures. Results for well fluids are compared to estimated inflow temperatures. The effects of gases from other sources, e.g. magmatic fluid entering reservoirs, condensation/boiling, loss of components and mixing of different fluids during upflow, are discussed. Those geothermometers that give results reasonably close to the inflow temperatures, and are not constrained by the need to know thermodynamic parameters, are used to estimate subsurface temperatures from fumarole steam composition. It is suggested that geothermometers based on H{sub 2} and H{sub 2}S concentrations are relatively effective. The CO{sub 2}, H{sub 2}S and H2 geothermometers are also evaluated by thermodynamic simulation using plausible mineral buffers. The CO{sub 2} geothermometer generally gives slightly low temperatures for values in the range 100-200{sup o}C. The calibration of the existing H{sub 2}S and H{sub 2} geothermometers needs improvement when reservoir temperatures are higher than 220{sup o}C. The mineral buffer controlling H{sub 2}S in reservoirs seems to be pyrite + magnetite + epidote + prehnite changing into pyrite + pyrrhotite + epidote + prehnite changing into pyrite + pyrrhotite + epidote + prehnite with increasing temperature. (author)

  5. Modelling the Interaction of Multiple Borehole Heat Exchangers in Shallow Geothermal Fields

    Science.gov (United States)

    Shao, H.; Schelenz, S.; Kist, N.; Shim, B. O.; Bucher, A.; Kolditz, O.

    2014-12-01

    The utilization of Borehole Heat Exchanger (BHE) to transfer heat from the shallow subsurface has been a common practice for the Ground Source Heat Pump (GSHP) system. To represent realistic application scenarios for numerical simulations of such systems, saturated and unsaturated conditions as well as heterogeneous soil properties have to be considered. Analytical solutions such as the Moving Finite Line Source (MFLS) model are not flexible enough to capture the full dynamics of the system. Furthermore, application examples with a high density of installed BHEs exist. There, temperature plumes produced by the individual BHEs may start to interact with each other and lead to lower thermal output. To simulate this interaction, a dual continuum approach has been implemented into the open-source FEM simulator OpenGeoSys (OGS). The model is capable of simulating the temperature evolution around the BHE, with the consideration of both saturated and unsaturated groundwater flow processes in the surrounding soil. Instead of imposing Dirichlet or Neumann type of boundary condition at the location of a BHE, the newly developed model allows the user to specify inflow refrigerant temperature and flow rate as the driving force of heat transport. In a benchmark with homogeneous soil properties and fully saturated condition, temperature evolution predicted by the numerical model has been verified against MFLS analytical solution. In a second benchmark, the model simulated outflow temperature is validated by comparing to field measured data from a Thermal Response Test (TRT), provided by the Korean Institute of Geoscience and Mineral Resources (KIGAM) in Dajeon, South Korea. After simulating several shallow geothermal scenarios of multiple BHEs operating in close vicinity, we find that the super-imposed MFLS based analytical solution predicts similar temperature distribution, provided the heat extraction from each BHE is relatively low. However, when the heat exchange rate is

  6. Essential Role for the BacA Protein in the Uptake of a Truncated Eukaryotic Peptide in Sinorhizobium meliloti▿

    OpenAIRE

    Marlow, Victoria L.; Haag, Andreas F.; Kobayashi, Hajime; Fletcher, Vivien; Scocchi, Marco; Walker, Graham C.; Ferguson, Gail P.

    2008-01-01

    The inner membrane BacA protein is essential for the establishment of chronic intracellular infections by Sinorhizobium meliloti and Brucella abortus within plant and mammalian hosts, respectively. In their free-living state, S. meliloti and B. abortus mutants lacking BacA have reductions in their outer membrane lipid A very-long-chain fatty acid (VLCFA) contents and exhibit low-level resistance to the glycopeptide bleomycin in comparison to their respective parent strains. In this paper we i...

  7. Fracture development within a stratovolcano: The Karaha-Telaga Bodas geothermal field, Java volcanic arc

    Science.gov (United States)

    Nemcok, M.; Moore, J.N.; Allis, R.; McCulloch, J.

    2004-01-01

    Karaha-Telaga Bodas, a vapour-dominated geothermal system located in an active volcano in western Java, is penetrated by more than two dozen deep geothermal wells reaching depths of 3 km. Detailed paragenetic and fluid-inclusion studies from over 1000 natural fractures define the liquid-dominated, transitional and vapour-dominated stages in the evolution of this system. The liquid-dominated stage was initiated by ashallow magma intrusion into the base of the volcanic cone. Lava and pyroclastic flows capped a geothermal system. The uppermost andesite flows were only weakly fractured due to the insulating effect of the intervening altered pyroclastics, which absorbed the deformation. Shear and tensile fractures that developed were filled with carbonates at shallow depths, and by quartz, epidote and actinolite at depths and temperatures over 1 km and 300??C. The system underwent numerous cycles of overpressuring, documented by subhorizontal tensile fractures, anastomosing tensile fracture patterns and implosion breccias. The development of the liquidsystem was interrupted by a catastrophic drop in fluid pressures. As the fluids boiled in response to this pressure drop, chalcedony and quartz were selectively deposited in fractures that had the largest apertures and steep dips. The orientations of these fractures indicate that the escaping overpressured fluids used the shortest possible paths to the surface. Vapour-dominated conditions were initiated at this time within a vertical chimney overlying the still hot intrusion. As pressures declined, these conditions spread outward to form the marginal vapour-dominated region encountered in the drill holes. Downward migration of the chimney, accompanied by growth of the marginal vapour-dominated regime, occurred as the intrusion cooled and the brittle-ductile transition migrated to greater depths. As the liquids boiled off, condensate that formed at the top of the vapour-dominated zone percolated downward and low

  8. MODEL BUDAYA BACA-TULIS BERBASIS BALANCE LITERACY DAN GERAKAN INFORMASI LITERASI DI SD

    Directory of Open Access Journals (Sweden)

    Yuliyati -

    2014-09-01

    Full Text Available Abstract: Reading-Writing Culture Model Based on Balance Literacy Approach and Information Literacy Movement in Elementary School. This study was designed to construct a reading and writing culture model based on balance literacy approach and information literacy movement. This research-and-development study comprised two stages. In Stage 1, surveys, review of literature, and the development of the draft were conducted. Stage 2 focused on trying out a limited revision of the key products, applying product revision, and revising the final product. The product was validated experimentally using a two-group pretest-posttest random design, involving 127 students in the experimental group and 130 in the control. The data collected through a test, observations, and interviews were statistically analyzed. The results show that the model is effective to develop the students’ ability in reading and writing and  that reading-writing habits can be developed if all members of the school intentionally develop the students’ literacy habits through working hard and applying the model together. Keywords: reading and writing culture, balance literacy, literacy information movement, elementary school Abstrak: Model Budaya Baca-Tulis Berbasis Balance Literacy dan Gerakan Informasi di Sekolah Dasar. Penelitian pengembangan ini bertujuan mengonstruksi model budaya baca-tulis berbasis balance literacy dan gerakan informasi. Pengembangan dilaksanakan dalam dua tahap. Tahap 1 meliputi survei, reviu literatur, pengembangan draf. Tahap 2 meliputi uji lapangan terbatas, revisi produk utama, uji lapangan utama, revisi produk aplikatif, dan revisi produk akhir. Validasi produk dilakukan melalui eksperiman dengan rancangan prates-pascates rambang dua kelompok. Subjek terdiri dari 127 siswa pada kelompok eksperimen dan 130 siswa pada kelompok kontrol. Data dikumpulkan dengan tes, observasi, dan wawancara, kemudian dianalisis dengan analisis varian. Hasil pengembangan

  9. Hyperspectral image analysis for the determination of alteration minerals in geothermal fields: Çürüksu (Denizli) Graben, Turkey

    Science.gov (United States)

    Uygur, Merve; Karaman, Muhittin; Kumral, Mustafa

    2016-04-01

    Çürüksu (Denizli) Graben hosts various geothermal fields such as Kızıldere, Yenice, Gerali, Karahayıt, and Tekkehamam. Neotectonic activities, which are caused by extensional tectonism, and deep circulation in sub-volcanic intrusions are heat sources of hydrothermal solutions. The temperature of hydrothermal solutions is between 53 and 260 degree Celsius. Phyllic, argillic, silicic, and carbonatization alterations and various hydrothermal minerals have been identified in various research studies of these areas. Surfaced hydrothermal alteration minerals are one set of potential indicators of geothermal resources. Developing the exploration tools to define the surface indicators of geothermal fields can assist in the recognition of geothermal resources. Thermal and hyperspectral imaging and analysis can be used for defining the surface indicators of geothermal fields. This study tests the hypothesis that hyperspectral image analysis based on EO-1 Hyperion images can be used for the delineation and definition of surfaced hydrothermal alteration in geothermal fields. Hyperspectral image analyses were applied to images covering the geothermal fields whose alteration characteristic are known. To reduce data dimensionality and identify spectral endmembers, Kruse's multi-step process was applied to atmospherically and geometrically-corrected hyperspectral images. Minimum Noise Fraction was used to reduce the spectral dimensions and isolate noise in the images. Extreme pixels were identified from high order MNF bands using the Pixel Purity Index. n-Dimensional Visualization was utilized for unique pixel identification. Spectral similarities between pixel spectral signatures and known endmember spectrum (USGS Spectral Library) were compared with Spectral Angle Mapper Classification. EO-1 Hyperion hyperspectral images and hyperspectral analysis are sensitive to hydrothermal alteration minerals, as their diagnostic spectral signatures span the visible and shortwave

  10. Determination of Microbial Diversity and Nitrogen Cycling from Kizildere Geothermal Field with Next Generation Sequencing

    Science.gov (United States)

    Gulecal, Y.; Dilek, Y.

    2012-12-01

    The deep terrestrial subsurface biosphere represents an emerging frontier for studies of biodiversity, the physiological limits to life, microbial mechanisms of adaptation, and potentially analogous environments for extraterrestrial life (1). Last decade, researches of deep boreholes in the United States, Finland, Sweden, Japan and South Africa, using molecular tools, have shown an an active biosphere composed of diverse groups of microorganisms. The microbial communities reported from different subsurface communities vary widely; such differences are due to different host rock types and varied water origins and chemistry, as well as geography. Furthermore, nitrogen cycling is studied intensely in hot springs for instance in situ nifH expression in Yellowstone National Park, is a new upper temperature limit for nitrogen fixation in alkaline, terrestrial hydrothermal environments (2). This study explores the genetic diversity of microbial communities and genes of nitrogen cycling in Kizildere Geothermal Field, Turkey. The Kizildere thermal waters are located in the northern part of the Büyük Menderes rift zone. The hydrothermal alteration includes phyllic, argillic, silicic,hematitized, and carbonatized alteration zones. The surface temperatures of Kizildere thermal waters in drill holes range from 95 to100°C and pH 9.0-9.5. Microbial communities were examined using culture independent methods, next generation sequencing. Nitrogen fixation, the diversity of nifH, ammonia oxidation (amoA), narG, nosZ genes are investigated in deeply-sourced fluids. We present field observations and interpret new data, establishing a geobiological baseline for previously undescribed sitres of subsurface ecosystems. (1)Fredrickson et al. 2006. Geomicrobial processes and biodiversity in the deep terrestrial subsurface. Geomicrobiology J. 23:345-356. (2) Loiacono et al. 2012. Evidence for high-temperature in situ nifH transcription in an alkaline hot spring of Lower Geyser Basin

  11. Simulation studies for wells AH-4bis/AH-17 and AH-18, Ahuachapan Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Monterrosa, Manuel Ernesto

    1996-01-24

    Well AH-4bis, at the Ahuachapan Geothermal Field is planned to be drilled on the same pad as the former AH-4. A simulation study was carried out for two casing dameters 13 5/8 and 9 5/8” in order to estimate its production and to know its economic feasibility. The simulation results indcate a high probability of production in the range of 7 Mwe, equivalent to 120 kg/s total mass flow rate, 1250 kJ/kg at 6 bar-a for the new well AH-4bis. Well AH- 17 is good producer, during 1991 after ten years of production, the well was shut-in due to silica scaling problems. A wellbore simulation was carried out in order to predict the new production conditions after the work-over, mainly to estimate the water flow rate in order to reduce the silica scaling. The results indicate a very low water flow rate. The match between the simulated and measured production curves after the work-over was successful. The well AH-18 is located at the southern part of the actual bore field. CEL is planning to expand the borefield at this area and it is neccessary to estimate the possible production condtions at that zone. The results indicate a high probabilty of production at that area. The power potential is estimated at 3.5 Mwe per well at WHP 6 bar-a and the wells will not require induction.

  12. The sulphur springs geothermal field, St. Lucia, lesser Antilles: Hydrothermal mineralogy of wells SL-1 and SL-2

    Science.gov (United States)

    Battaglia, S.; Gianelli, G.; Rossi, R.; Cavarretta, G.

    Two wells have been drilled to depths of 1413 and 2213 meters in the geothermal field of Sulphur Springs, St. Lucia, and reveal a complex volcanic sequence characterized by collapse episodes followed by the emplacement of dacite domes. The geothermal reservoir consists of fractured volcanic rocks and produces superheated steam. Well-bottom temperatures are around 270-290°C. The hydrothermal alteration found in both the productive SL-2 well and the non-productive SL-1 is strongly reminiscent of that of porphyry copper deposits, with (1) an inner, high-temperature potassic zone characterized by the occurrence of dravitic tourmaline, quartz, and biotite, (2) an outer propylitic alteration zone that is partly superimposed on (3) a potassic alteration zone. The alteration mineral assemblages indicate that the hydrothermal system has cooled at the levels sampled.

  13. Geothermal energy in Jordan

    International Nuclear Information System (INIS)

    The potential of geothermal energy utilization in Jordan was discussed. The report gave a summary of the location of geothermal anomalies in Jordan, and of ongoing projects that utilize geothermal energy for greenhouse heating, fish farming, refrigeration by absorption, and water desalination of deep aquifers. The problems facing the utilization of geothermal energy in Jordan were identified to be financial (i.e. insufficient allocation of local funding, and difficulty in getting foreign financing), and inadequate expertise in the field of geothermal energy applications. The report gave a historical account of geothermal energy utilization activities in Jordan, including cooperation activities with international organizations and foreign countries. A total of 19 reports already prepared in the areas of geochemical and hydrological studies were identified. The report concluded that the utilization of geothermal energy offers some interesting economic possibilities. (A.M.H.). 4 refs. 1 map

  14. Investigation of geothermal fields in himalayan range in pakistan using isotope and chemical techniques

    International Nuclear Information System (INIS)

    There are many geothermal sites in Himalayan belt of Pakistan having low to high temperatures(boiling water). Isotopes and geochemical techniques were applied to investigate the origin, subsurface history and reservoir temperatures of geothermal fields at Tatta Pani and Tato lying along Main Mantle Thrust, Murtazabad along Main Karakoram Thrust and Kotli in the area of overlapping thrusts: Punjal Thrust, Main Boundary Thrust and the Himalaya Frontal Thrust. Discharge of the springs varies from 30 to 2000 liters per minute with the surface temperature from 47.3 to 92 degree C. Two sets of water samples were collected from these fields. The samples were analyzed for various isotopes (O/sup 18/, H/sup 2/ and H/sup 3/ of water; C/sup 13/ of dissolved inorganic carbon; S/sup 34/ and O/sup 18/ of dissolved sulphates); and water chemistry. The thermal waters of the Northern Areas of Pakistan are generally neutral to slightly alkaline and have low dissolved contents. Sodium is the dominant cation in all the cases. In terms of anions, HCO/sub 3/ is dominating. Source of recharge is meteoric water (rains and/or snow-melt). The dominant process of cooling is conduction at Tatta Pani, Tato, and Murtazabad. Shallow groundwater is mixing with the thermal springs in different proportions at Murtazabad, while there is no mixing in the thermal waters of Tatta Pani and Tato. The equilibrium temperature of the thermal end-member at Murtazabad is in the range of 185- 225 degree C and the isochemical-mixing model based on the Na-K and quartz geothermometers estimates 227 degree C temperature. O/sup 18/ (SO/sub 4/-H/sub 2/O) geothermometer indicates equilibrium temperatures (before mixing) above I85 degree C. The dissolved silica vs. enthalpy plot suggests heat losses through conduction from the original temperature about 245 degree C. The reservoir temperatures of Tatta Pani (100-130 degree C) determined by the Na-K, K-Mg and quartz geothermometers are in good agreement. O/sup 18/ (SO

  15. A NEW MEDIUM TO HIGH ENTHALPY GEOTHERMAL FIELD IN AEGEAN REGION (AKYAR) MENDERES – SEFERİHİSAR – İZMİR, WESTERN ANATOLIA, TURKEY

    OpenAIRE

    BULUT, Metin

    2013-01-01

    There are also geothermal areas of low and medium enthalpy besides the high-temperature geothermal fields in the Western Anatolia. These areas are important for thermal tourism and agricultural applications. According to the surface temperature at by the lowtemperature action for known fluid high temperature fluid can be provided. They are the purpose of the study. The study area between the towns of Mendere and Seferihisar. These districts are located south-southwest of Izmir. İnvestigate th...

  16. 广东英德市碳酸盐岩地热田地温场特征和成因%Geotherm Characteristics and Genesis of a Carbonatite Geothermal Field in Yingde, Guangdong Province

    Institute of Scientific and Technical Information of China (English)

    程文汉

    2013-01-01

    The Hengshitang geothermal field, located in Yingde, Guangdong Province, is of carbonatite geothermal resources. Based on the regional geological data and the groundwater temperatures collected from the drilling holes, this paper analyses its geotherm characteristics, reservoir conditions, recharge, runoff, and drainage. Devonian-carboniferous carbonatites mainly compose geothermal reservoir of the field, whose geothermal water runoff and geotherm characteristics are controlled by a series of geological structures along Wuchuan-Sihui deep fault zone. Geotemperature curves show that the geothermal field appears an irregular long elliptic shape, with major axis being nearly NW trending, hence inferring that variation of the geotherm is related to fractures and corrosion degree of rocks. There is no additional heat source here, thus the geothermal water is mainly caused by deep cycling process.%广东省英德市横石塘地区的地热田属于碳酸盐岩型地热资源。文章根据钻孔测温资料,结合区域地质资料,分析了该地热田的地温场特征、埋藏条件、补径排条件等。该地热田主要热储层为泥盆―石炭系碳酸盐岩,热水径流特征和地温场特征受吴川―四会深断裂带的一系列构造控制。测温曲线显示:地温场形态呈不规则长椭圆形,长轴方向近北西向,可以推断地温场变化与岩石的断裂、裂隙和溶蚀程度有关。本区无附加型热源,深循环为该区热水的主要形成原因。

  17. Geothermal field and its relation with coalbed methane distribution of the Qinshui Basin

    Institute of Scientific and Technical Information of China (English)

    SUN Zhanxue; ZHANG Wen; HU Baoqun; LI Wenjuan; PAN Tianyou

    2005-01-01

    The average geothermal gradient in the Qinshui Basin, Shanxi Province, North China, estimated from temperature logging data of 20 boreholes is 28.2±1.03℃/km.The thermal conductivities of 39 rock samples are measured and 20 heat flow values are obtained. The estimated heat flow ranges from 44.75 mW/m2 to 101.81 mW/m2, with a mean of 62.69±15.20 mW/m2. The thermal history reconstruction from the inversion of vitrinite data, using Thermodel for Windows 2004, reveals that the average paleo-heat flow at the time of maximum burial in late Jurassic to early Cretaceous is 158.41 mW/m2 for the north part, 119.57mW/m2 for the central part and 169.43 mW/m2 for the south part of the basin respectively. The reconstruction of the buried history of the strata indicates that the age for the end of sedimentation and the beginning of erosion for the basin is 108-156 Ma, and that the eroded thickness of the strata is 2603 m in the north, 2291 m in the central, and 2528.9 m in the south of the basin respectively. The "higher in the north and the south, lower in the central" distribution pattern of the paleo-heat flow coincides with the distribution of the coal-bed methane spatially and temporally, which shows that the coal-bed methane is controlled by the paleo-geotemperature field in the basin.

  18. Gas Geothermometry in the Hveragerdi High—Temperature Geothermal Field,SW Iceland

    Institute of Scientific and Technical Information of China (English)

    孙占学; HALLDORARMANNSON

    2000-01-01

    Five gas geothermometers based on the concentrations of CO2,H2S,H2,CH2,N2 and Ar in fumaroles and wet-stem wells are applied to estimating subsurface temperatures in the Hveragerdi high-temperature geothmal field,SW Iceland,The results for fumaroles indicate that the calculated subsurface temperatures decrase from the northern part to the southern part of the field.The CO2-geothermometer gives the highers temperature values,with an average of 256℃ for the northern part,and 247℃ for the southern part.The H2S-geothermometer reveals an aquifer temperature of 211℃ for the northern part,and 203℃ for the southern part.The H2-geothermometer gives an average subsurface temperature of 229℃ for the northern part,and 184℃ for the southern part,which agerees excellently with the measured temperatures in wet-steam wells.The measured borhole temperatures in the field range from 215℃ to 230℃ for the northern part,and from 167℃ to 198℃ for the southern part.The CO2/H2-geothermometer gives the lowest subsurface temperature values,with an average of 203℃ for the northern part,and 143℃ for the southern part,The CO2/N2-geothermometer gives 249℃ for the northern part and 235℃ for the southern part.For the data from wells,the CO2-, H2S-,and H2-geothermometers,give average subsurface temperatures of 247℃ for the northern part and 246℃ for the southern part,213℃ for the northern part and 220℃ for the southern part,and 217℃ for the northern part and 216℃ for the southern part,respectively.The CO2/H2-geothermometer indicates an average subsurface tem,perature of about 200℃ for both the northern part and the southern part.The CO2/N2-geothermometer gives an average subsurface temperature of 180℃ for the northern part and 259℃ for the southern part.The discrepancy between the estimeated subsurface temperatures obtained by the various gas geothermometers has been explained in this paper.By integrating the solute geothermometric results,mixing model

  19. Environmental summary document for the Republic Geothermal, Inc. application for a geothermal loan guaranty project: 64 MW well field and 48 MW (net) geothermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Layton, D.W.; Powers, D.J.; Leitner, P.; Crow, N.B.; Gudiksen, P.H.; Ricker, Y.E.

    1979-07-01

    A comprehensive review and analysis is provided of the environmental consequences of (1) guaranteeing a load for the completion of the 64 MW well field and the 48 MW (net) power plant or (2) denying a guaranteed load that is needed to finish the project. Mitigation measures are discussed. Alternatives and their impacts are compared and some discussion is included on unavoidable adverse impacts. (MHR)

  20. Development of geothermal field following the 2000 eruption of Usu volcano as revealed by ground temperature, resistivity and self-potential variations

    Directory of Open Access Journals (Sweden)

    T. Mogi

    2007-06-01

    Full Text Available The 2000 eruption of Usu volcano, NE Japan, took place on the foot of the somma, and formed a cryptodome of 65 m high accompanying numerous faults. We made repeated measurements of ground temperature, Self-Potential (SP and electrical resistivity, in order to clarify the mechanism of development of the newly formed geothermal field on the fault zone. Prior to the expansion of the geothermal field, we detected a resistive zone at the center of the geothermal zone and it supposed to evidence that the zone involving dry steam phase had been formed beneath the fault zone. A rapid expansion of the geothermal field followed along the fault zone away from the craters. The place of maximum amplitude of the SP field also migrated following the expansion of the high ground temperature zone. The high resistive part has shrunk as a consequence of the progress of condensation to warm the surroundings. Based on the observations, we delineated the process of the hydrothermal circulation. Considering the topographic effect of the SP field observed on the highly permeable zone in the Usu somma, the potential flow along the slope of the soma was expected to play an important role to promote the rapid expansion of the geothermal field and the migration of the most active part.

  1. Causality between expansion of seismic cloud and maximum magnitude of induced seismicity in geothermal field

    Science.gov (United States)

    Mukuhira, Yusuke; Asanuma, Hiroshi; Ito, Takatoshi; Häring, Markus

    2016-04-01

    Occurrence of induced seismicity with large magnitude is critical environmental issues associated with fluid injection for shale gas/oil extraction, waste water disposal, carbon capture and storage, and engineered geothermal systems (EGS). Studies for prediction of the hazardous seismicity and risk assessment of induced seismicity has been activated recently. Many of these studies are based on the seismological statistics and these models use the information of the occurrence time and event magnitude. We have originally developed physics based model named "possible seismic moment model" to evaluate seismic activity and assess seismic moment which can be ready to release. This model is totally based on microseismic information of occurrence time, hypocenter location and magnitude (seismic moment). This model assumes existence of representative parameter having physical meaning that release-able seismic moment per rock volume (seismic moment density) at given field. Seismic moment density is to be estimated from microseismic distribution and their seismic moment. In addition to this, stimulated rock volume is also inferred by progress of microseismic cloud at given time and this quantity can be interpreted as the rock volume which can release seismic energy due to weakening effect of normal stress by injected fluid. Product of these two parameters (equation (1)) provide possible seismic moment which can be released from current stimulated zone as a model output. Difference between output of this model and observed cumulative seismic moment corresponds the seismic moment which will be released in future, based on current stimulation conditions. This value can be translated into possible maximum magnitude of induced seismicity in future. As this way, possible seismic moment can be used to have feedback to hydraulic stimulation operation in real time as an index which can be interpreted easily and intuitively. Possible seismic moment is defined as equation (1), where D

  2. Gas Geothermometry for Drilhole Fluids from Vapor Dominated and Hot Water Geothermal Fields

    Energy Technology Data Exchange (ETDEWEB)

    D' Amore, Franco; Truesdall, Alfred H.

    1980-12-16

    The compositions of steam from the vapor-dominated geothermal systems of Larderello, Italy and The Geysers, California have been shown by previous investigators to vary with position in the field. The most conspicuous chemical patterns observed in the Larderello and The Geysers vapor-dominated geotherrnal are strong increases or decreases from the center to the edges of constituents carried in the steam. The pattern of these parameters in vapor-dominated systems seem to be controlled mainly by a process of lateral steam movement and condensation. The condensation process, at constant temperature and total pressure increases the partial pressure of CO{sub 2} at the same rate as the gas/steam ratio, strongly affecting the composition of the total gas (including steam). The condensation effect should increase contents of CO{sub 2}, H{sub 2}S, H{sub 2} and CH{sub 4} in the residual steam to about the same degree because their solubilities are similar. However, the general trend observed is almost constant ratios of H{sub 2}S, H{sub 2}, CH{sub 4} to H{sub 2}O as the CO{sub 2}/H{sub 2}O ratio increases in Larderello about 5-6 times from the center to the edges at constant temperature. This means that the H{sub 2}/CO{sub 2}, CH{sub 4}/CO{sub 2}, and H{sub 2}S/CO{sub 2} ratios decrease with increasing CO{sub 2}/H{sub 2}O ratios. Apparently the only rnechanism that can explain this behavior is reaction of these three gases with other gases and with reservoir minerals so that the partial pressures of these gases are buffered by temperature-dependent reactions with water and rock minerals. A system of appropriate equations involving H{sub 2}O, CO{sub 2}, H{sub 2}. CH{sub 4}, H{sub 2}S were set up. The geothermometers have been tested on data from the Italian fields of Larderello, Travale, Bagnore, Piancastagnaio and from The Geysers, U.S.A. The gas geothermometers have been applied t o steam samples from wells FBN and ALR in order to define changes in both well and reservoir

  3. Environmental assessment of proposed geothermal well testing in the Tigre Lagoon Oil Field, Vermilion Parish, Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    1976-03-01

    An environmental assessment is made of the proposed testing of two geopressured, geothermal aquifers in central coastal Louisiana. On the basis of an analysis of the environmental setting, subsurface characteristics, and the proposed action, potential environmental impacts are determined and evaluated together with potential conflicts with federal, state, and local programs. (LBS )

  4. Conceptual Model Evaluation of the Astor Pass Geothermal Field, Western Nevada

    Science.gov (United States)

    Reeves, D. M.; Parashar, R.; Pohll, G. M.; Cooper, C. A.; Lyles, B. F.; Faulds, J. E.; Siler, D. L.; Louie, J. N.; Ehni, B.; Kratt, C.; Pullammanappallil, S.; Noel, D.

    2012-12-01

    A blind geothermal system, located approximately 90 km north of Reno, NV on the Pyramid Lake Paiute Tribe Reservation, was characterized and evaluated according to a comprehensive investigation, consisting of geophysical and shallow temperature surveys, structural geological analysis, and reservoir characterization techniques. The geothermal reservoir system, located in basalts, basaltic-andesites and rhyolites of the middle Miocene Lower Pyramid sequence, likely originated as the result of intersections between dextral and normal faults creating a localized region of enhanced extension and fracture permeability. Geologic and geophysical interpretations informed the location of two exploration wells. These wells reached down to the underlying granodiorite basement, confirmed fault structures seen in the seismic images, and were used to characterize the reservoir through borehole fracture characterization and a long duration hydraulic reservoir test. High fracture densities (0.7 m average spacing) were encountered in the reservoir rocks, and results from the hydraulic test indicate that the reservoir is well-connected with drawdown responses observed in a shallow water well located approximately 1 km from the pumping well. Borehole spinner log surveys with temperature probes and high resolution DTS measurements indicate that fracture inflows are relatively constant along the open internval of the boreholes with isothermal temperatures ranging between 92 to 95°C along the exploration wells. Analysis of the reservoir drawdown response yields bulk transmissivity values of 4.8×10-4 to 6.7×10-5 m2/s, with fracture transmissivity values ranging between 1.0×10-4 to 7.2×10-7 m2/s. This comprehensive set of data suggests that the Astor Pass geothermal reservoir is a small system with high fracture connectivity and permeability and relatively isothermal temperatures from 100 m to 1,300 m below land surface. A multiphase geothermal model is currently being developed of

  5. Geothermal Energy.

    Science.gov (United States)

    Conservation and Renewable Energy Inquiry and Referral Service (DOE), Silver Spring, MD.

    An introduction to geothermal energy is provided in this discussion of: (1) how a geothermal reservoir works; (2) how to find geothermal energy; (3) where it is located; (4) electric power generation using geothermal energy; (5) use of geothermal energy as a direct source of heat; (6) geopressured reservoirs; (7) environmental effects; (8)…

  6. Trace element and isotopic chemistry of the surficial hydrothermal waters in the Cerro Prieto, Geothermal Field, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Valette-Silver, J.N.; Ganje, T.J.; Bradford, G.R.; Coplen, T.

    1982-08-10

    In the Cerro Prieto Geothermal Field, five kinds of surface emissions were discovered in spring, mud pot, geysers, fumarole, and cool pool. The major element composition of the 163 fluid samples collected in 1979, was previously performed. This study was recently completed by a determination of trace element concentrations, deuterium and oxygen isotope ratios. This geochemical analysis shows, as the major elements do, that each type of surficial emission is characterized by its own unique chemistry. Each category of surface emission appears to result from different processes; trace chemistry as well as isotope composition confirm the various origins of the different surface hydrothermal fluids.

  7. Geothermal handbook. Geothermal project, 1976. [Ecological effects of geothermal resources development

    Energy Technology Data Exchange (ETDEWEB)

    1976-06-01

    The geothermal program of Fish and Wildlife Service, U.S. Dept. of Interior, aims to develop ecologically sound practices for the exploration, development, and management of geothermal resources and the identification of the biological consequences of such development so as to minimize adverse effects on fish and wildlife resources. This handbook provides information about the ecological effects of geothermal resource development. Chapters are included on US geothermal resources; geothermal land leasing; procedures for assessing the effects on fish and game; environmental impact of exploratory and field development operations; and wildlife habitat improvement methods for geothermal development.

  8. Thermal History of the Felsite Unit, Geysers Geothermal Field, From Thermal Modeling of 40Ar/39Ar Incremental Heating Data

    Energy Technology Data Exchange (ETDEWEB)

    T. M. Harrison (U of California); G. B. Dalrymple (Oregon State U); J. B. Hulen (U of Utah); M. A. Lanphere; M. Grove; O. M. Lovera

    1999-08-19

    An Ar-40/Ar-39 and U-Pb study was performed of the Geysers plutonic complex of the Geysers Geothermal Field in California. Sixty-nine ion microprobe spot analyses of zircons from four granite samples from the plutonic complex that underlies the Geysers geothermal field yielded Pb-207/Pb-206 vs. U-238/Pb-206 concordia ages ranging from 1.13 {+-} 0.04 Ma to 1.25 {+-} 0.04 Ma. The U-Pb ages coincide closely with Ar-40/Ar-39 age spectrum plateau and ''terminal'' ages from coexisting K-feldspars and with the eruption ages of overlying volcanic rocks. The data indicate that the granite crystallized at 1.18 Ma and had cooled below 350 C by {approximately}0.9-1.0 Ma. Interpretation of the feldspar Ar-40/Ar-39 age data using multi-diffusion domain theory indicates that post-emplacement rapid cooling was succeeded either by slower cooling from 350-300 C between 1.0 and 0.4 Ma or transitory reheating to 300-350 C at about 0.4-0.6 Ma. Heat flow calculations constrained with K-feldspar thermal histories and the pre sent elevated regional heal flow anomaly demonstrate that appreciable heat input from sources external to the known Geysers plutonic complex is required to maintain the geothermal system. This requirement is satisfied by either a large, underlying, convecting magma chamber (now solidified) emplaced at 1.2 Ma or episodic intrusion of smaller bodies from 1.2-0.6 Ma.

  9. Determination of recharge areas and circulation periods of the Kutahya-Gediz geothermal fields by means of stable isotopes

    International Nuclear Information System (INIS)

    The Gediz geothermal field is one of the high enthalpy sites. Dwelling of Gediz is planned by the site which today is being used only for thermal tourism. Basement geology is formed of Paleozoic aged gneiss. These are overlain by Upper Paleozoic - Middle Triassic aged schists, Upper Triassic - Maestrichtian aged limestones, serpantinite ultramaphic rocks including blocks, olistolites with silisified and carbonated rocks, Middle to Upper Miocene aged continental sediments and limestones, lagune and river deposits consisting of limestone and marls, intruded by Middle to Upper Pliocene aged basaltic intrusions. Quaterniary aged deposits; alluvials and travertines form the most upper section of the lithology. Along the Hamam River, E - W extwended, with temperatures varying between 57 to 75.5 degreesand mean discharge of 15 l/s, 9 hot springs discharge, in the Gediz (Abide) geothermal field. According to the production wells drilled by MTA (Mineral Research and Exploration General Directorate), the geothermal systems reservoir consists of fractured zones of the Paleozoic aged gneiss and the karstified zones of the Triassic aged limestones, as well as the gravel and sandstone layers of the Middle - Upper Miocene aged sediments. Groundwaters related with the recharge area give Ca - HCO3 type waters. As a result of the chloride evaluations realized, an enrichment has lead to the groundwater flow direction from the recharge area towards the Abide site. Hot waters of the area give Na-SO4-HCO3 type. According to the Tritium contents, the recharge age of the springs located in the investigation site, varies between 5 - 15 TU. This indicates a 5-10 years of age for the groundwaters, which puts them into a modern waters classification. Evaluation of Deuterium gives that the Gediz Thermal wells are recharged from an elevation of 1700 - 1900 m. This corresponds to the mean altitudes of the karstified limestones and schists of the Saphane Mountain

  10. Numerical simulation of electricity generation potential from fractured granite reservoir through a single horizontal well at Yangbajing geothermal field

    International Nuclear Information System (INIS)

    Development of deep high-temperature heat reservoir at Yangbajing geothermal field has very important significance for capacity expanding and sustaining of the ground power plant. The geological exploration found that there is a fractured granite heat reservoir with an average temperature of 248 °C at depth of 950∼1350 m in well ZK4001 in the north of the geothermal field. In this work, a simplified conceptual model of the 950∼1350 m reservoir is established based on all the existing geological data, and the electricity generation potential from this fractured granite reservoir by geothermal water mining through a single horizontal well is numerically simulated. The results indicate that the single horizontal well system attains an electric power of 3.23∼3.48 MW and an energy efficiency of about 50.00∼17.16 during 20 years under reference conditions. The main parameters that affect the heat extraction and electricity generation are reservoir porosity, permeability and water production rate. Higher porosity or higher permeability or higher water production rate will be favorable for improving the electricity generation performance, under the precondition of not arousing vaporization and precipitation in the liquid water saturated reservoir. - Highlights: • We established a numerical model of single horizontal-well heat mining system. • Desirable electricity production performance can be obtained under suitable conditions. • The system attains an electric power of 3.23∼3.48 MW with an efficiency of about 50∼17.16 during 20 years. • Electric power mainly depends on water production rate, reservoir porosity and permeability. • Higher porosity or higher permeability or higher water production rate is favorable for electricity generation

  11. Results From a Borehole Seismometer Array II: 3-D Mapping of an Active Geothermal Field at the Kilauea Lower Rift Zone

    Science.gov (United States)

    Shalev, E.; Kenedi, C. L.; Malin, P.

    2008-12-01

    The geothermal power plant in Puna, in southeastern Hawaii, is located in a section of the Kilauea Lower East Rift Zone that was resurfaced by lava flows as recently as 1955, 1960, and 1972. In 2006 a seismic array consisting of eight 3-component stations was installed around the geothermal field in Puna. The instrument depths range from 24 to 210 m. The shallower instruments have 2 Hz geophones and the deeper have 4.5 Hz geophones. 3-D tomographic analyses of P-wave velocity, S-wave velocity, and the Vp/Vs ratio show an area of very fast P-wave velocity at the relatively shallow depth of 2.5 km in the southern section of the field. The same area shows moderate S-wave velocity. This high P-wave velocity anomaly at the southern part of the geothermal field may indicate the presence of dense rock material usually found at greater depths.

  12. Geothermal energy

    International Nuclear Information System (INIS)

    Objective of this brochure is to present the subject Geothermics and the possible use of geothermal energy to the public. The following aspects will be refered to: -present energy situation -geothermal potential -use of geothermal energy -environemental aspects -economics. In addition, it presents an up-dated overview of geothermal projects funded by the German government, and a list of institutions and companies active in geothermal research and developments. (orig./HP)

  13. Environmental protection at the Los Azufres, Michoacan geothermal field; La proteccion ambiental en el campo geotermico de Los Azufres, Michoacan

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza Rangel, Ernesto; Hernandez Ayala, Cuauhtemoc [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

    2004-12-01

    Geothermal-electric development is a sustainable activity from an environmental viewpoint, as is proved by the operation and management of the Los Azufres geothermal field. Impacts to soil and vegetation can be prevented and adequately mitigated. Liquid residues can be returned to the reservoir avoiding contaminating surface and ground waters and aquifers; and atmospheric emissions can kept bellow allowable limits. The main environmental technical experiences of Comision Federal de Electricidad (CFE) in this field are presented in this paper. [Spanish] El desarrollo geotermoelectrico es una actividad sustentable desde el punto de vista ambiental, como lo prueba el manejo del campo geotermico de Los Azufres. Los impactos al suelo y a la vegetacion pueden prevenirse y mitigarse con las medidas adecuadas. Los desechos liquidos pueden regresarse al yacimiento sin contaminar cuerpos de agua superficiales o acuiferos someros, y las emisiones a la atmosfera pueden controlarse para mantenerlas dentro de limites permisibles. Se presentan las principales experiencias tecnicas de tipo ambiental obtenidas por la Comision Federal de Electricidad (CFE) en ese campo.

  14. Results From a Borehole Seismometer Array I: Microseismicity at a Productive Geothermal Field, Kilauea Lower East Rift Zone, Puna, Hawaii

    Science.gov (United States)

    Kenedi, C. L.; Shalev, E.; Malin, P.; Kaleikini, M.; Dahl, G.

    2008-12-01

    Borehole seismometer arrays have proven successful in both the exploration and monitoring of geothermal fields. Because the seismometers are located at depth, they are isolated from human noise and record microearthquakes with clearly identifiable seismic phases that can be used for event location. Further analysis of these events can be used to resolve earthquake clouds into identifiable faults. The local fault and dike structures in Puna, in southeastern Hawaii, are of interest both in terms of electricity production and volcanic hazard monitoring. The geothermal power plant at Puna has a 30MW capacity and is built on a section of the Kilauea Lower East Rift Zone where lava flows erupted as recently as 1955. In order to improve seismic monitoring in this area, we installed eight 3-component borehole seismometers. The instrument depths range from 24 to 210 m (80 to 690 ft); the shallower instruments have 2 Hz geophones and the deepest have 4.5 Hz geophones. The seismometers are located at the vertices of two rhombs, 2 km wide x 4 km long and 4 km wide x 8 km long, both centered at the power plant. Since June 2006, we have located >4500 earthquakes; P- and S-wave arrivals were hand picked and events located using Hypoinverse-2000. Most of the earthquakes occurred at depths between 2.5 and 3 km. The large majority of events were M-0.5 to M0.5; the Gutenberg-Richter b-value is 1.4, which is consistent with microearthquake swarms. Frequency analysis indicates a 7-day periodicity; a Schuster diagram confirms increased seismicity on a weekly cycle. The location, depth, and period of the microearthquakes suggest that power plant activity affects local seismicity. Southwest of the geothermal facility, up-rift towards the Kilauea summit, earthquakes were progressively deeper at greater distances. Depths also increased towards the south, which is consistent with the eastern extension of the south-dipping, east-striking Hilina fault system. To the northeast, down-rift of the

  15. Status of geothermal energy in Ethiopia

    International Nuclear Information System (INIS)

    This paper reports that there are several identified geothermal localities in Ethiopia. Ten geothermal localities have been studied with regional assessments, while three localities have had pre-feasibility studies. In one area, the Aluto-Langano geothermal field, the feasibility studies have been completed. However, the geothermal resources have not been utilized yet except in the traditional baths

  16. Olefin Isomerization Regiochemistries during Tandem Action of BacA and BacB on Prephenate in Bacilysin Biosynthesis†

    OpenAIRE

    Parker, Jared B.; Walsh, Christopher T.

    2012-01-01

    BacA and BacB, the first two enzymes of the bacilysin pathway, convert prephenate to an exocylic regioisomer of dihydrohydroxyphenylpyruvate (ex-H2HPP) on the way to the epoxycyclohexanone warhead in the dipeptide antibiotic, bacilysin. BacA decarboxylates prephenate without aromatization, converting the 1,4-diene in prephenate to the endocyclic 1,3 diene in Δ4Δ8-dihydrohydroxyphenylpyruvate (en-H2HPP). BacB then performs an allylic isomerization to bring the diene into conjugation with the 2...

  17. Silica phases in sinters and residues from geothermal fields of New Zealand

    Science.gov (United States)

    Rodgers, K. A.; Browne, P. R. L.; Buddle, T. F.; Cook, K. L.; Greatrex, R. A.; Hampton, W. A.; Herdianita, N. R.; Holland, G. R.; Lynne, B. Y.; Martin, R.; Newton, Z.; Pastars, D.; Sannazarro, K. L.; Teece, C. I. A.

    2004-06-01

    Five silica phases are major components of silica sinters, deposited from both near-neutral pH alkali-chloride and acid-sulfate thermal waters, and of silica residues formed at the surface of geothermal fields in New Zealand. In all cases, the initial silica is noncrystalline opal-A deposited commonly as microspheres that possess an underlying nanospherical substructure, upon different substrate templets, including microbes living in hot springs. Deposition may also occur monomerically upon earlier deposited silica. Following microsphere growth through Ostwald ripening, silica remains mobile throughout the postdepositional history of the sinter/residue deposits, resulting in a range of textures. These include the continuing growth of microspheres, the development of secondary microspheres and silica coatings, phase transformations, a reduction in sinter porosity, dissolution features, and late-stage deposition of drusy quartz and opal-A. The sinter mass attempts to achieve thermodynamic equilibrium through stepwise phase transformations (maturation): opal-A crystallises to paracrystalline opal-CT±opal-C, which recrystallises to microcrystalline α-quartz+moganite. No intermediate silica phases are produced, but gradual changes occur among different opal-A or opal-CT/-C phases. The phase maturation produces changes in particle densities, silanol water, and in X-ray powder response of the different silica phases, although the rates of change can be perturbed by heating, weathering, and dissolution of the sinter/residue. The properties of opal-A change little in a sinter/residue mass within the first 10,000 years, but reductions occur in the densities, silanol water, and X-ray scattering bandwidth of older sinters where opal-A can persist for up to 100,000 years. Eventually, opal-A transforms to opal-CT when silanol water is reduced sufficiently for enough -Si-O-Si- linkages to produce a crude diffraction-like X-ray response. The transformation is aided by heat, as

  18. Field tests of corrosion and chemical sensors for geothermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    Robertus, R.J.; Shannon, D.W.; Sullivan, R.G.; Mackey, D.B.; Koski, O.H.; McBarron, F.O.; Duce, J.L.; Pierce, D.D.

    1986-03-01

    This report summarizes approximately two years of continuous monitoring of corrosion (and other variables that affect corrosion) in a 10-megawatt binary cycle geothermal power plant. The project goal was to develop methods for detecting adverse plant conditions soon enough to prevent equipment failures. The instruments tested were: (1) resistance-type corrosion probes; (2) linear polarization corrosion probes; (3) oxidation/reduction potential (ORP) probes for oxygen detection; (4) high-temperature pH electrodes; and (5) electrodeless conductivity cells for gas bubble detection.

  19. Geothermal Turbine

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    The first geothermal power generation in the world was started at Larderello, Italy in 1904. Then, New Zealand succeeded in the geothermal power generating country. These developments were then followed by the United States, Mexico, Japan and the Soviet Union, and at present, about 25 countries are utilizing geothermal power, or investigating geothermal resources.

  20. Reactive geothermal transport simulation to study the formation mechanism of impermeable barrier between acidic and neutral fluid zones in the Onikobe Geothermal Field, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Todaka, Norifumi; Akasaka, Chitosi; Xu, Tianfu; Pruess, Karsten

    2003-04-09

    Two types of fluids are encountered in the Onikobe geothermal reservoir, one is neutral and the other is acidic (pH=3). It is hypothesized that acidic fluid might be upwelling along a fault zone and that an impermeable barrier might be present between the acidic and neutral fluid zones. We carried out reactive geothermal transport simulations using TOUGHREACT (Xu and Pruess, 1998 and 2001) to test such a conceptual model. Mn-rich smectite precipitated near the mixing front and is likely to form an impermeable barrier between regions with acidic and neutral fluids.

  1. Reactive geothermal transport simulation to study the formation mechanism of impermeable barrier between acidic and neutral fluid zones in the Onikobe Geothermal Field, Japan

    OpenAIRE

    Todaka, Norifumi; Akasaka, Chitoshi; Xu, Tianfu; Pruess, Karsten

    2003-01-01

    Two types of fluids are encountered in the Onikobe geothermal reservoir, one is neutral and the other is acidic (pH=3). It is hypothesized that acidic fluid might be upwelling along a fault zone and that an impermeable barrier might be present between the acidic and neutral fluid zones. We carried out reactive geothermal transport simulations using TOUGHREACT (Xu and Pruess, 1998 and 2001) to test such a conceptual model. Mn-rich smectite precipitated near the mixing front and is likely...

  2. Geology of the Pavana geothermal area, Departamento de Choluteca, Honduras, Central America: Field report

    Energy Technology Data Exchange (ETDEWEB)

    Eppler, D.B.; Heiken, G.; Wohletz, K.; Flores, W.; Paredes, J.R.; Duffield, W.A.

    1987-09-01

    The Pavana geothermal area is located in southern Honduras near the Gulf of Fonseca. This region is underlain by late Tertiary volcanic rocks. Within ranges near the geothermal manifestations, the rock sequences is characterized by intermediate to mafic laharic breccias and lavas overlain by silicic tuffs and lavas, which are in turn overlain by intermediate to mafic breccias, lavas, and tuffs. The nearest Quaternary volcanoes are about 40 km to the southwest, where the chain of active Central American volcanoes crosses the mouth of the Gulf of Fonseca. Structure of the Pavana area is dominated by generally northwest-trending, southwest-dipping normal faults. This structure is topographically expressed as northwest-trending escarpments that bound blocks of bedrock separated by asymmetric valleys that contain thin alluvial deposits. Thermal waters apparently issue from normal faults and are interpreted as having been heated during deep circulation along fault zones within a regional environment of elevated heat flow. Natural outflow from the main thermal area is about 3000 l/min of 60/sup 0/C water. Geothermometry of the thermal waters suggests a reservoir base temperature of about 150/sup 0/C.

  3. Isotopic and hydrochemical properties of hot and mineralized waters in SW Konya Geothermal Field (Turkey)

    International Nuclear Information System (INIS)

    The study area is located at southwest part of Konya (Central Anatolia). The basement formation of the area is Caltepe, deposited from Early Cambrian through Middle Cambrian. Seydisehir Formation which is composed of alternating slate, sandstone and metasandstone overlies conformably the overthrown Caltepe Formation and is Upper Cambrian-Lower Ordovician in age. Seydisehir Formation is conformably underlined by Tarasci Limestone, Neogene in age. Alluvium is Quaternary-Present in age. The hot and mineralized waters are located in the study area around Ilicatepe and Kavakkoy village having temperature range between 31 deg. C and 46 deg. C, flow rate between 1.42 and 5.0 L/s and total dissolved solids between 2,218-3,500 mg/L. Aquifers of these waters are the porous limestone and dolomitic limestone of the Caltepe Formation. The travertine cones occur as a result of water activity. The groundwaters are classified according to the AIH standards are Ca, Na, HCO3, and B bearing hot and mineralized water. The oxygen and hydrogen isotope compositions of geothermal waters reveal meteoric origin. They have more negative δ18O and δ2H values and lower 3H contents compared to cold waters. The geothermal water aquifers are recharged from higher altitudes and they are hardly affected by recent precipitations. (author)

  4. Isotopic and hydrochemical properties of hot and mineralized waters in SW Konya geothermal field (Turkey)

    International Nuclear Information System (INIS)

    The study area is located at southwest part of Konya (Central Anatolia). The basement formation of the area is Caltepe, deposited from Early Cambrian through Middle Cambrian. Seydisehir Formation which is composed of alternating slate, sandstone and metasandstone overlies conformably the overthrown Caltepe Formation and is Upper Cambrian-Lower Ordovician in age. Seydisehir Formation is conformably underlined by Neocene in age Tarasci Limestone. Alluvium is Quaternary-Present in age. The hot and mineralized waters located in the study area around Ilicatepe and Kavakkoy villages have a temperature range between 31 deg. C and 46 deg. C, flow rate between 1.42 and 5 L/s and a total dissolved mineral between 2218-3500 mg/L. Aquifer of these waters are the porous limestone and dolomitic limestone of the Qaltepe formation. The travertine cones occur as a result of water activity. The waters classified according to the AIH standards are Ca, Na, HCO3, and B bearing hot and mineralized water. The oxygen and hydrogen isotope compositions of geothermal waters reveal meteoric origin. They have more negative δ18O and δ2H values, and lower 3H contents compared to cold waters. The geothermal water aquifers are recharged from higher altitudes and are hardly affected by recent precipitations. (author)

  5. Land subsidence in the Cerro Prieto Geothermal Field, 1 Baja California, Mexico, from 1994 to 2005. An integrated analysis of DInSAR, levelingand geological data.

    Energy Technology Data Exchange (ETDEWEB)

    Sarychikhina, O; Glowacka, E; Mellors, R; Vidal, F S

    2011-03-03

    Cerro Prieto is the oldest and largest Mexican geothermal field in operation and has been producing electricity since 1973. The large amount of geothermal fluids extracted to supply steam to the power plants has resulted in considerable deformation in and around the field. The deformation includes land subsidence and related ground fissuring and faulting. These phenomena have produced severe damages to infrastructure such as roads, irrigation canals and other facilities. In this paper, the technique of Differential Synthetic Aperture Radar Interferometry (DInSAR) is applied using C-band ENVISAR ASAR data acquired between 2003 and 2006 to determine the extent and amount of land subsidence in the Mexicali Valley near Cerro Prieto Geothermal Field. The DInSAR results were compared with published data from precise leveling surveys (1994- 1997 and 1997-2006) and detailed geological information in order to improve the understanding of temporal and spatial distributions of anthropogenic subsidence in the Mexicali Valley. The leveling and DInSAR data were modeled to characterize the observed deformation in terms of fluid extraction. The results confirm that the tectonic faults control the spatial extent of the observed subsidence. These faults likely act as groundwater flow barriers for aquifers and reservoirs. The shape of the subsiding area coincides with the Cerro Prieto pull-apart basin. In addition, the spatial pattern of the subsidence as well as changes in rate are highly correlated with the development of the Cerro Prieto Geothermal Field.

  6. Sub-surface geology, petrochemistry and hydrothermal alteration of Wells MW-03, MW-09 and MW-20 from Menengai geothermal field, Kenya

    OpenAIRE

    Mgejwa, Ngereja Myabi, 1981-

    2016-01-01

    The Menengai geothermal field is one of the high temperature geothermal systems in Kenya. It is seated within the Great East Africa Rift System in the Central Kenyan Rift Valley and covered by quarternary volcanics. The study wells, MW-03, MW-09 and MW-20, were drilled inside the Menengai caldera, which is characterized by ring faults, the Molo TVA which trends NNW-SSE and the Solai TVA which trends NNE-SSW direction. The volcano formed about 200,000 years ago and the prominent 12 x 8 km cal...

  7. Preliminary study on the characteristics of carbon and oxygen isotopes in the Shiziping geothermal field groundwater in Emei Mountain

    International Nuclear Information System (INIS)

    Emei Mountain is a well-known scenic tourism spot in China. In order to promote the development of tourist trade, the authors have explored the hydrothermal water in Emei Mountain. At the beginning of 1998, the hydrothermal water was successfully drilled from the Shiziping geothermal field. In the process of prospecting the hydrothermal water, the authors adopted the geochemical method such as carbon and oxygen isotopes. The result indicates that the groundwater of different genetic types has different constitution characteristics of carbon and oxygen isotopes. This provides the important basis for finding out the forming conditions of underground hydrothermal water. So, it is prospective to study the growth characteristics of hydrothermal water with the carbon and oxygen isotopes of HCO3 in groundwater

  8. A study of production/injection data from slim holes and production wells at the Oguni Geothermal Field, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K.; Combs, J.; Abe, M.

    1996-03-01

    Production and injection data from slim holes and large-diameter wells at the Oguni Geothermal Field, Japan, were examined in an effort to establish relationships (1) between productivity of large-diameter wells and slim holes, (2) between injectivity and productivity indices and (3) between productivity index and borehole diameter. The production data from Oguni boreholes imply that the mass production from large-diameter wells may be estimated based on data from slim holes. Test data from both large- and small-diameter boreholes indicate that to first order the productivity and the injectivity indices are equal. Somewhat surprisingly, the productivity index was found to be a strong function of borehole diameter; the cause for this phenomenon is not understood at this time.

  9. Advanced Geothermal Turbodrill

    Energy Technology Data Exchange (ETDEWEB)

    W. C. Maurer

    2000-05-01

    Approximately 50% of the cost of a new geothermal power plant is in the wells that must be drilled. Compared to the majority of oil and gas wells, geothermal wells are more difficult and costly to drill for several reasons. First, most U.S. geothermal resources consist of hot, hard crystalline rock formations which drill much slower than the relatively soft sedimentary formations associated with most oil and gas production. Second, high downhole temperatures can greatly shorten equipment life or preclude the use of some technologies altogether. Third, producing viable levels of electricity from geothermal fields requires the use of large diameter bores and a high degree of fluid communication, both of which increase drilling and completion costs. Optimizing fluid communication often requires creation of a directional well to intersect the best and largest number of fracture capable of producing hot geothermal fluids. Moineau motor stators made with elastomers cannot operate at geothermal temperatures, so they are limited to the upper portion of the hole. To overcome these limitations, Maurer Engineering Inc. (MEI) has developed a turbodrill that does not use elastomers and therefore can operate at geothermal temperatures. This new turbodrill uses a special gear assembly to reduce the output speed, thus allowing a larger range of bit types, especially tri-cone roller bits, which are the bits of choice for drilling hard crystalline formations. The Advanced Geothermal Turbodrill (AGT) represents a significant improvement for drilling geothermal wells and has the potential to significantly reduce drilling costs while increasing production, thereby making geothermal energy less expensive and better able to compete with fossil fuels. The final field test of the AGT will prepare the tool for successful commercialization.

  10. Genetic analysis of the Rhizobium meliloti bacA gene: functional interchangeability with the Escherichia coli sbmA gene and phenotypes of mutants.

    OpenAIRE

    Ichige, A; Walker, G C

    1997-01-01

    The Rhizobium meliloti bacA gene encodes a function that is essential for bacterial differentiation into bacteroids within plant cells in the symbiosis between R. meliloti and alfalfa. An Escherichia coli homolog of BacA, SbmA, is implicated in the uptake of microcin B17, microcin J25 (formerly microcin 25), and bleomycin. When expressed in E. coli with the lacZ promoter, the R. meliloti bacA gene was found to suppress all the known defects of E. coli sbmA mutants, namely, increased resistanc...

  11. Dynamics of a geothermal field traced by noble gases: Cerro Prieto, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Mazor, E. (Weizmann Inst. of Science, Rehovot, Israel); Truesdell, A.H.

    1981-01-01

    Noble gases have been measured mass spectrometrically in samples collected during 1977 from producing wells at Cerro Prieto. Positive correlations between concentrations of radiogenic (He, /sup 40/Ar) and atmospheric noble gases (Ne, Ar, and Kr) suggest the following dynamic model: the geothermal fluids originated from meteoric water penetrated to more than 2500 m depth (below the level of first boiling) and mixed with radiogenic helium and argon-40 formed in the aquifer rocks. Subsequently, small amounts of steam were lost by a Raleigh process (0 to 3%) and mixing with shallow cold water occurred (0 to 30%). Noble gases are sensitive tracers of boiling in the initial stages of 0 to 3% steam separation and complement other tracers, such as Cl or temperature, which are effective only beyond this range.

  12. Evaluation of the solute geothermometry of thermal springs and drilled wells of La Primavera (Cerritos Colorados) geothermal field, Mexico: A geochemometrics approach

    Science.gov (United States)

    Pandarinath, Kailasa; Domínguez-Domínguez, Humberto

    2015-10-01

    A detailed study on the solute geothermometry of thermal water (18 springs and 8 drilled wells) of La Primavera geothermal field (LPGF) in Mexico has been carried out by employing a geochemical database compiled from the literature and by applying all the available solute geothermometers. The performance of these geothermometers in predicting the reservoir temperatures has been evaluated by applying a geochemometrics (geochemical and statistical) method. The springs of the LPGF are of bicarbonate type and the majority have attained partial-equilibrium chemical conditions and the remaining have shown non-equilibrium conditions. In the case of geothermal wells, water is dominantly of chloride-type and, among the studied eight geothermal wells, four have shown full-equilibrium chemical conditions and another four have indicated partial-equilibrium conditions. All springs of HCO3-​ type water have provided unreliable reservoir temperatures, whereas the only one available spring of SO42- type water has provided the reservoir temperature nearer to the average BHT of the wells. Contrary to the general expected behavior, spring water of non-equilibrium and geothermal well water of partial-equilibrium chemical conditions have indicated more reliable reservoir temperatures than those of partially-equilibrated and fully-equilibrated water, respectively. Among the chemical concentration data, Li and SiO2 of two springs, SO42- and Mg of four springs, and HCO3 and Na concentrations of two geothermal wells were identified as outliers and this has been reflected in very low reservoir temperatures predicted by the geothermometers associated with them (Li-Mg, Na-Li, Na-K-Mg, SiO2 etc.). Identification of the outlier data points may be useful in differentiating the chemical characteristics, lithology and the physico-chemical and geological processes at the sample locations of the study area. In general, the solute geothermometry of the spring waters of LPGF indicated a dominantly

  13. The Tianjin geothermal field (north-eastern China): Water chemistry and possible reservoir permeability reduction phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Minissale, Angelo; Montegrossi, Giordano; Orlando, Andrea [Institute of Geosciences and Earth Resources, National Research Council of Italy (CNR), Via G. La Pira 4, 50121 Florence (Italy); Borrini, Daniele; Tassi, Franco [Department of Earth Sciences, University of Florence, Via G. La Pira 4, 50121 Florence (Italy); Vaselli, Orlando [Institute of Geosciences and Earth Resources, National Research Council of Italy (CNR), Via G. La Pira 4, 50121 Florence (Italy); Department of Earth Sciences, University of Florence, Via G. La Pira 4, 50121 Florence (Italy); Huertas, Antonio Delgado [Estacion Experimental de Zaidin (CSIC), Prof. Albareda 1, 18008 Granada (Spain); Yang, Jincheng; Cheng, Wanquing [Aode Renewable Energy Research Institute, 90 Weijin South Road, Nankai District, 300381 Tianjin (China); Tedesco, Dario [Department of Environmental Sciences, Second University of Naples, Via Vivaldi 43, Caserta 81100 (Italy); Institute of Environmental Geology and Geo Engineering (CNR), Piazzale A. Moro 5, Roma 00100 (Italy); Poreda, Robert [Department of Earth and Environmental Sciences, University of Rochester, 227 Hutchison Hall, Rochester, NY 14627 (United States)

    2008-08-15

    Injection of spent (cooled) thermal fluids began in the Tianjin geothermal district, north-eastern China, at the end of the 1990s. Well injectivities declined after 3-4 years because of self-sealing processes that reduced reservoir permeability. The study focuses on the factors that may have caused the observed decrease in permeability, using chemical and isotopic data on fluids (water and gas) and mineral phases collected from production and injection wells. The results of data processing and interpretation indicate that (1) it is very unlikely that calcite and silica precipitation is taking place in the reservoir; (2) the Fe- and Zn-rich mineral phases (e.g. sulfides, hydroxides and silicates) show positive saturation indexes; (3) SEM and XRD analyses of filtered material reveal that the latter mineral phases are common; (4) visual observation of casings and surface installations, and of corrosion products, suggests that a poor quality steel was used in their manufacture; (5) significant quantities of solids (e.g. quartz and feldspar crystals) are carried by the geothermal fluid; (6) seasonal changes in fluid composition lead to a reduction in casing corrosion during the summer. It was concluded that the decrease in injectivity in the Tianjin wells is caused only in part by the oxidation of casings, downhole pumps, and surface installations, triggered by free oxygen in the injected fluids; the utilization of better quality steels should drastically reduce this type of corrosion. Self-sealing of pores and fractures by reservoir formation solids and by the Fe-corrosion products suspended in the injected fluids seems to be a more important phenomenon, whose effect could be greatly reduced by installing filtering devices at all sites. (author)

  14. Seismic activity and stress tensor inversion at Las Tres Vírgenes Volcanic and Geothermal Field (México)

    Science.gov (United States)

    Antayhua-Vera, Yanet; Lermo-Samaniego, Javier; Quintanar-Robles, Luis; Campos-Enríquez, Oscar

    2015-10-01

    We analyze local earthquakes occurring between 2003 and 2012 at the Las Tres Vírgenes Volcanic and Geothermal Field (TVVGF) to establish their temporal and spatial distribution, and relationships with local and regional fault systems, water injection, acid stimulation and steam production tests. We obtained focal mechanisms and inverted data for the stress tensor to understand the local and regional stress fields. We analyzed 423 local earthquakes with magnitudes between 0.1 and 2.9 Mc and hypocentral depths from 0.2 to 7.4 km b.s.l. The cutoff depth at ~ 7.4 km possibly delineates the brittle-ductile transition zone. We identified seven swarms (from 1 to 7). Swarms 1 (December 2009), 2 (May 2010), 3 (June-July 2010) and 7 (December 2012) are strongly correlated with injection processes; whereas swarms 5 (April 2012) and 6 (September 2012) are correlated with local tectonic faults. Stress inversion showed NW-SE, E-W and NE-SW extensional orientations (Shmin), in agreement with the local tectonic stress field; while NE-SW compressional orientations (SHmax) are correlated with the regional tectonic stress field.

  15. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091762 Guo Wancheng(Xining Jiulong Engineering Investigation Ltd.,Xining 810700,China);Shi Xingmei Development and Utilization of Guide Basin’s Geothermal Resources of Qinghai Province(Hydrogeology and Engineering Geology,ISSN1000-3665,CN11-2202/P,35(3),2008,p.79-80,92,2 illus.,2 tables,2 refs.)Key words:geothermal resources,QinghaiThis paper introduced the background of geothermal conditions and the many years of geothermal exploration data in Guide Basin.Then,the authors discussed the geothermal resources feature of Guide basin and raised some opinions on the reasonable development and utilization of geothermal resources.

  16. Subsurface geology of Los Humeros geothermal field, Puebla, Mexico; Geologia del subsuelo del campo geotermico de Los Humeros, Puebla, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Cedillo Rodriguez, Fidel [Comision federal de Electricidad, Perote, Veracruz, Mexico(Mexico)

    2000-12-01

    In the 1980s, most geologists correlated subsurface geology at Los Humeros geothermal field using penetrated by faults, as interpreted by photogeology. These were structural objectives for geothermal drilling programs. Recent petrology reinterpretation of data from well cutting lets us identify nine lithologic units, with the Toba Vitrea Humeros as the index horizon. The study of the subsurface geology allows us to demonstrate- based on the distribution, depth, and thickness of the lithologic units- that the augite andesites, the Toba Vitrea Humeros, the hornblende andesites, the basalt, and the metamorphosed limestone are affected by system of hidden faults (with no surface evidence) replaced by major fracture zones able to contain steam. Thus these hidden faults are the structural objectives controlling design and sitting of new wells. We conclude that the lithologic unit of augite andesites forms the upper geothermal reservoir, and the hornblende andesites and basalt comprise the lower reservoir- separated from each other by the Toba Vitrea Humeros lithologic unit. Based on the subsurface geologic model, we propose drilling 40 new wells, a long and parallel the north-south faults system. [Spanish] En la decada de los 80s se agrupo la geologia del subsuelo de Los Humeros en cuatro unidades litologicas afectadas por fallas interpretadas por fotogeologia. Estas fallas eran el objetivo estructural para programar la perforacion de pozos geotermicos. La reinterpretacion de los datos de petrologia de las muestras de canal permite identificar nueve unidades litologicas, de las cuales la unidad Toba Vietrea Humeros se comporta como horizonte indice. El estudio de la geologia del subsuelo permite demostrar, con base en la distribucion, profundidades y espesores de las unidades litologicas, que las andesitas de augita, la Toba Vitrea Humeros, las andesitas de hornblenda, los basaltos, y las calizasmetamorfizadas estan afectadas por sistemas de fallas ocultas (sin

  17. Using earthquake clusters to identify fracture zones at Puna geothermal field, Hawaii

    Science.gov (United States)

    Lucas, A.; Shalev, E.; Malin, P.; Kenedi, C. L.

    2010-12-01

    The actively producing Puna geothermal system (PGS) is located on the Kilauea East Rift Zone (ERZ), which extends out from the active Kilauea volcano on Hawaii. In the Puna area the rift trend is identified as NE-SW from surface expressions of normal faulting with a corresponding strike; at PGS the surface expression offsets in a left step, but no rift perpendicular faulting is observed. An eight station borehole seismic network has been installed in the area of the geothermal system. Since June 2006, a total of 6162 earthquakes have been located close to or inside the geothermal system. The spread of earthquake locations follows the rift trend, but down rift to the NE of PGS almost no earthquakes are observed. Most earthquakes located within the PGS range between 2-3 km depth. Up rift to the SW of PGS the number of events decreases and the depth range increases to 3-4 km. All initial locations used Hypoinverse71 and showed no trends other than the dominant rift parallel. Double difference relocation of all earthquakes, using both catalog and cross-correlation, identified one large cluster but could not conclusively identify trends within the cluster. A large number of earthquake waveforms showed identifiable shear wave splitting. For five stations out of the six where shear wave splitting was observed, the dominant polarization direction was rift parallel. Two of the five stations also showed a smaller rift perpendicular signal. The sixth station (located close to the area of the rift offset) displayed a N-S polarization, approximately halfway between rift parallel and perpendicular. The shear wave splitting time delays indicate that fracture density is higher at the PGS compared to the surrounding ERZ. Correlation co-efficient clustering with independent P and S wave windows was used to identify clusters based on similar earthquake waveforms. In total, 40 localized clusters containing ten or more events were identified. The largest cluster was located in the

  18. Geothermal Energy

    Energy Technology Data Exchange (ETDEWEB)

    Steele, B.C.; Harman, G.; Pitsenbarger, J. [eds.

    1996-02-01

    Geothermal Energy Technology (GET) announces on a bimonthly basis the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production.

  19. Geothermal energy

    International Nuclear Information System (INIS)

    A brief article reviews the development of geothermal energy within the OECD countries. Topics covered include power generation, direct use, hot dry rocks and geothermal heat pumps. The limited exploitation in the UK is also described. (UK)

  20. Road impacts on the Baca National Wildlife Refuge, Colorado, with emphasis on effects to surface and shallow ground-water hydrology : a literature review

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A review of published research on unpaved road effects on surface-water and shallow ground-water hydrology was undertaken to assist the Baca National Wildlife...

  1. San Ignacio (La Tembladera) geothermal site, Departamento de Francisco Morazan, Honduras, Central America: Geological field report

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, M.J.; Eppler, D.; Heiken, G.; Flores, W.; Ramos, N.; Ritchie, A.

    1987-06-01

    The San Ignacio (La Tembladera) geothermal site is located on the north side of the Siria Valley, Departamento de Francisco Morazan, near the village of Barrosa. Hot springs are located along a northwest-trending fault scarp at the edge of the valley and along north-trending faults that cross the scarp. The rocks in the area are primarily Paleozoic metamorphic rocks, overlain by patches of Tertiary Padre Miguel Group tuffs and alluvial deposits. Movement probably occurred along several faults during latest Tertiary and possibly early Quaternary times. Four spring areas were mapped. Area 1, the largest, is associated with a sinter mound and consists of 40 spring groups. About half of the springs, aligned along a north-south trend, are boiling. Area 2 is a small sinter mound with several seeps. Area 3 consists of a group of hot and boiling springs aligned along a north-trending fault. The springs rise through fractured schists and a thin cover of alluvium. Area 4 is located at the intersection of several faults and includes one of the largest boiling springs in the area.

  2. Methods for collection and analysis of geopressured geothermal and oil field waters

    Energy Technology Data Exchange (ETDEWEB)

    Lico, M.S.; Kharaka, Y.K.; Carothers, W.W.; Wright, V.A.

    1982-01-01

    Present methods are described for the collection, preservation, and chemical analysis of waters produced from geopressured geothermal and petroleum wells. Detailed procedures for collection include precautions and equipment necessary to ensure that the sample is representative of the water produced. Procedures for sample preservation include filtration, acidification, dilution for silica, methyl isobutyl ketone (MIBK) extraction of aluminum, addition of potassium permanganate to preserve mercury, and precipitation of carbonate species as strontium carbonate for stable carbon isotopes and total dissolved carbonate analysis. Characteristics determined at the well site are sulfide, pH, ammonia, and conductivity. Laboratory procedures are given for the analysis of lithium, sodium, potassium, rubidium, cesium, magnesium, calcium, strontium, barium, iron, manganese, zinc, lead, aluminum, and mercury by atomic absorption and flame emission spectroscopy. Chloride is determined by silver nitrate titration and fluoride by ion-specific electrode. Bromide and iodide concentrations are determined by the hypochlorite oxidation method. Sulfate is analyzed by titration using barium chloride with thorin indicator after pretreatment with alumina. Boron and silica are determined colorimetrically by the carmine and molybdate-blue methods, respectively. Aliphatic acid anions (C/sub 2/ through C/sub 5/) are determined by gas chromatography after separation and concentration in a chloroform-butanol mixture.

  3. Isotopic and geochemical study of the Domuyo geothermal field, Neuquen, Argentina

    International Nuclear Information System (INIS)

    Environmental isotopes, 2H, 18O and 3H as well as chemical analyses of dissolved solids and gases have been performed in order to establish a circulation model and reservoir temperature. According to tritium levels and isotope content, recharge occurs 2900 m above sea level on the west slope of the Domo volcano. Water from a geyser, ''El Humazo'', was recognized as the more related to the primary deep geothermal fluid, although with a minor proportion of fresh water. Reservoir temperature as estimates by the Na-K-Ca geothermometer on this manifestation yield a value of 225 deg. C. A shallower reservoir with temperature of about 176 deg. C (Na-K-Ca geothermometer) is evidenced in ''Las Olletas' and ''Los Tachos'' also affected by dilution and steam loss processes. Finally, temperate manifestations as ''Aguas Calientes'' and ''Banos de Aguas Calientes'' are the result of mixing between Las Olletas type waters with fresh meteoric shallower waters. Gas thermometry and computation of fluid and mineral equilibrium yield temperatures between 220-248 deg. C for the deep reservoir, in agreement with more classical techniques and suggest a value near to zero for the vapor fraction (Y) at depth and confirm the liquid state of the fluid into the reservoir. (author). 23 refs, 19 figs, 8 tabs

  4. Geothermal energy

    OpenAIRE

    Manzella A.

    2015-01-01

    Geothermal technologies use renewable energy resources to generate electricity and direct use of heat while producing very low levels of greenhouse-gas (GHG) emissions. Geothermal energy is stored in rocks and in fluids circulating in the underground. Electricity generation usually requires geothermal resources temperatures of over 100°C. For heating, geothermal resources spanning a wider range of temperatures can be used in applications such as space and district heating (and cooling, with p...

  5. Geothermal systems

    Science.gov (United States)

    Mohl, C.

    1978-01-01

    Several tasks of JPL related to geothermal energy are discussed. The major task is the procurement and test and evaluation of a helical screw drive (wellhead unit). A general review of geothermal energy systems is given. The presentation focuses attention on geothermal reservoirs in California, with graphs and charts to support the discussion. Included are discussions on cost analysis, systems maintenance, and a comparison of geothermal and conventional heating and cooling systems.

  6. Genesis Model of the Tangquan Geothermal Field in Hebei Province%河北遵化汤泉地热田成因模式

    Institute of Scientific and Technical Information of China (English)

    李攻科; 王卫星; 杨峰田; 李宏; 沈键; 董路阳

    2015-01-01

    河北遵化汤泉地热资源丰富,阐明其成因模式对于该地热田的进一步开发和热水资源的可持续利用具有一定的指导意义。基于地温测量和水文地球化学分析等方法对其进行了系统研究,结果表明该地热田属中低温对流型地热系统。地热田在其以北的山区接受大气降水补给,补给高程下限约为935 m。地热流体在深循环过程中于正常的大地热流背景下被围岩逐渐加热,热储温度约为130℃,循环深度约为4800 m。在汤泉福泉宫至疗养院一带,构造切割花岗岩体,使得深部地热流体沿破碎带上涌,混合并加热赋存于蓄水构造中的片麻岩裂隙水,形成汤泉地区的地热异常。%Tangquan is located in the northwest of Zunhua city,Hebei Province.The region is of hilly land-scape ,and rich in geothermal resources.It is of great importance to elucidate the genesis mechanism of the geo-thermal field for sustainable development of the geothermal resources.In this paper,we conducted a systematic study to explore into the genesis mechanism through well temperature logging and hydrogeochemical investiga-tion.Results show that the geothermal field belongs to a low to medium temperature geothermal system of con-vective type.The geothermal fluid origins from the rainfall recharged in the mountainous area located to the north of geothermal field,with a recharge elevation of more than 935 m.The geothermal fluid is gradually heat-ed by the surrounding rock under a normal heat flow background during a deep cycling of ca.4,800 m,with a reservoir temperature of ca. 1 30 ℃.In the zone of Fuquan palace to sanatorium in Tangquan area where several faults cut through the monzonitic granite body,the geothermal fluid up flow along the faults and mix with the fis-sure water stored in the gneisses,forming the Tangquan geothermal field.

  7. Geothermal energy

    International Nuclear Information System (INIS)

    This chapter discusses the role of geothermal energy may have on the energy future of the US. The topics discussed in the chapter include historical aspects of geothermal energy, the geothermal resource, hydrothermal fluids, electricity production, district heating, process heating, geopressured brines, technology and costs, hot dry rock, magma, and environmental and siting issues

  8. Why the seismicity induced in Soultz-sous-Forêts and Gross Schoenebeck enhanced geothermal fields are so different? (Invited)

    Science.gov (United States)

    Gaucher, E.; Kohl, T.

    2013-12-01

    In enhanced geothermal systems, hydraulic fracturing and hydraulic stimulation are techniques used to increase the reservoir permeability. Their secondary effect, the induced seismicity, is a unique means to image the fault network created or reactivated by the operations. The interpretation of the results for this latter application is however limited by the capabilities of the seismic network and by our understanding of the involved physical processes. Here, we propose to highlight systematic behaviors of the seismicity induced in enhanced geothermal reservoirs. This is performed through the analysis of two EGS sites which appear to behave very differently in terms of induced seismicity: the Soultz-sous-Forêts (France) and the Gross Schoenebeck (Germany) fields. Several physics-based models have been tested for these fields and these observations should be used to calibrate them and the underlying physical assumptions. The Soultz-sous-Forêts (France) geothermal field is located in the Upper Rhine valley. Over the development of this EGS, four wells have been drilled into the granitic basement, up to 5 km depth, and eight major stimulations were carried out to create the heat exchanger. Several major observations based on the large induced seismicity database have been made and can apply on other EGS. Hence, it was noticed that a) the induced seismicity mainly occurs along planar features, b) during stimulation, the induced seismicity becomes stronger over time and this is still observed after shut-in. Most often, the largest magnitude microearthquake occurs following shut-in, c) over a certain overpressure threshold, seismicity can be induced and also a clear Kaiser effect can be observed for already stimulated volumes, d) the stimulation and the circulation periods induce different seismic responses. At Gross Schoenebeck (Germany), the Dethlingen sandstones and the underlying andesitic volcanic rocks of the Rotliegend formation of the North German Basin

  9. Fracture mapping in the Soultz-sous-Forêts geothermal field using microearthquake locations

    Science.gov (United States)

    Michelet, Sophie; ToksöZ, M. Nafi

    2007-07-01

    In 2003, a massive hydraulic fracturing experiment was carried out at the European Geothermal Hot Dry Rock site at Soultz-sous-Forêts, France. The 2 week injection of water generated a high level of microseismic activity, triggering about 90,000 microearthquakes during and after the fluid injection. Of these, 21,000 events, detected at all stations, were located individually with a grid search algorithm to characterize the extent of the seismic zones and ultimately of the fracture network. The accuracy of these initial locations was around 70 m, not sufficient to map detailed fracture patterns. A precise relocation effort was undertaken to reduce the location uncertainties using three different techniques: joint hypocenter determination (JHD), collapsing and multiplet analysis. The collapsing method was added to the JHD results to further consolidate the hypocenters. On the other hand, a multiplet analysis was performed on the initial data set for identifying microearthquakes with similar waveforms and hence relocating relatively the correlated events. The delays in traveltime were computed by wavelet analysis and the events were relocated using a grid search algorithm. We found 7463 events whose seismograms correlated with a correlation coefficient of 0.8 or higher, most of which were doublets. Multiplets are horizontal tube-like structures with lengths from a hundred to several hundred meters striking along the direction of the maximum compressive horizontal stress. We interpret these structures as the preferential paths where fluid flow is largely confined. This hypothesis is reinforced by the good correlation in depth between the events and the fluid outflows observed in the well. Therefore we believe that these relocated events highlight the zones where the permeability of the reservoir is increased.

  10. A closely-spaced magnetotelluric study of the Ahuachapan-Chipilapa geothermal field, El Salvador

    Energy Technology Data Exchange (ETDEWEB)

    Romo, Jose Manuel; Flores, Carlos; Vega, Raymundo; Vazquez, Rogelio; Flores, Marco A. Perez; Trevino, Enrique Gomez; Esparza, Francisco J.; Garcia, Victor H. [Centro de Investigacion Cientifica y de Educacion Superior de Ensenada, Baja California (Mexico); Quijano, Julio E. [Comision Ejecutiva Hidroelectrica del Rio Lempa (CEL), Santa Tecla (El Salvador)

    1997-12-01

    The distribution of electrical conductivity beneath the Ahuachapan-Chipilapa geothermal area was simulated using 2-D models based on 126 closely-spaced magnetotelluric (MT) measurements. The observed MT response was interpreted as being produced by the superposition of two orthogonal geological structural systems: an approximately E-W regional trend associated with the Central Graben structure, which affects the loner period response, and a local and younger N-S fault system that is responsible for the short-to-intermediate period data. The MT response in the 0.02-10 s range period was used to simulate the conductivity structure within the first 2 km depth. By correlating the low-resistivity zones between twelve 2-D models, maps of the spatial distribution of conductors at three different depth levels were constructed. Three deep conductors were identified, one of the associated with the Ahuachapan reservoir, another apparently related to the Laguna Verde volcano, and a third one controlled by El Tortuguero Graben. The subsurface geometry of these conductivity anomalies suggests that the the Chipilapa and La Labor hot springs are supplied by two separate sources of hot fluids, one coming from the east and the other from the south or southwest. The distribution of the shallow high-conductivity zones agrees with the hydrothermal alteration zones mapped at the surface, suggesting that at shallow levels the argillitization process contributes significantly to the low resistivity. The large number of drillholes and the dense MT site coverage allowed the definition of important correlations between high temperatures and high conductivity, as well as between deep conductivity anomalies and productive wells. On this basis two years for future drilling are proposed. (Author)

  11. A study of production/injection data from slim holes and large-diameter wells at the Takigami Geothermal Field, Kyushu, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K. [Maxwell Federal Div., Inc., San Diego, CA (United States); Combs, J. [Geo-Hills Associates, Los Altos Hills, CA (United States); Azawa, Fumio [Idemitsu Kosan Co. Ltd., Tokyo (Japan); Gotoh, Hiroki [Idemitsu Oita Geothermal Co. Ltd., Oita (Japan)

    1996-11-01

    Production and injection data from nine slim holes and sixteen large-diameter wells at the Takigami Geothermal Field, Kyushu, Japan were analyzed in order to establish relationships (1) between injectivity and productivity indices, (2) between productivity/injectivity index and borehole diameter, and (3) between discharge capacity of slim holes and large-diameter wells. Results are compared with those from the Oguni and Sumikawa fields. A numerical simulator (WELBOR) was used to model the available discharge rate from Takigami boreholes. The results of numerical modeling indicate that the flow rate of large-diameter geothermal production wells with liquid feedzones can be predicted using data from slim holes. These results also indicate the importance of proper well design.

  12. Cost model for geothermal wells applied to the Cerro Prieto geothermal field case, BC Abstract; Modelo de costeo de pozos geotermicos aplicado para el caso del campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Vaca Serrano, Jaime M.E [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: jaime.vaca@cfe.gob.mx

    2008-01-15

    A project for drilling geothermal wells to produce electrical energy can be defined as a sequence of plans to get steam or geothermal fluids to satisfy a previously known demand, and, under the best possible conditions, to obtain payment. This paper presents a cost model for nine wells drilled at the Cerro Prieto geothermal field in 2005 and 2006 to supply steam to the power plants operating in the field. The cost model is based on the well cost, the initial steam production, the annual decline of steam, the drilling schedule and the break-even point for each well. The model shows the cost of steam by the ton and the sale price needed to determine the discount rate and the investment return time. [Spanish] Un proyecto de perforacion de pozos geotermicos puede definirse como una secuencia o sucesion de planes para obtener vapor o fluidos geotermicos destinados a satisfacer una demanda previamente determinada, que se emplearan principalmente para generar energia electrica, bajo las mejores condiciones para obtener un pago. Este trabajo presenta un modelo de costeo para nueve pozos en el campo geotermico de Cerro Prieto, que fueron perforados entre 2005 y 2006 como parte del suministro de vapor para las plantas generadoras que operan en este campo. El modelo de costeo se basa en el costo por pozo, la produccion inicial de vapor, la declinacion anual de vapor, los intereses de las obras de perforacion y el punto de equilibrio para cada pozo. Los resultados permiten conocer el costo de la tonelada de vapor y el precio de venta para determinar la tasa de descuento y el tiempo de retorno de la inversion.

  13. Analysis of P- and S-wave VSP (vertical seismic profile) data from the Salton Sea Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Daley, T.M.

    1987-09-01

    To understand any geophysical data, geologic information is necessary. This thesis will begin with a summary of the geology of the Salton Trough region and the Salton Sea Geothermal Field (SSGF). The information available from the SSSDP will also be summarized. After the geologic summary, the design of the VSP will be discussed, including acquisition equipment and procedures. The data processing procedures and software used will be discussed as a separate section. Processing procedures will also be described at various times in the thesis where more specialized procedures are used. Data analysis makes up the bulk of the thesis and it is divided into a number of sections detailing the basic VSP interpretation, the anisotropy analysis and the fracture detection and orientation analysis. A combined interpretation of the results, with probable geologic causes for observed events, is presented as a separate section from the data analysis. Finally, a summary of results for each of the goals stated above will be given. The reader should note that a large volume of data were collected and various display methods were used (from the standard wiggle-trace to three-component hodographs). Much of these data are left in the appendices with important or representative figures given in the body of the thesis. Also given in the appendices are listings of FORTRAN programs developed in conjunction with the thesis work. 46 refs., 63 figs., 12 tabs.

  14. Study of gel grown mixed crystals of BaCa(1–)(IO3)4

    Indian Academy of Sciences (India)

    S L Garud; N K Mahajan; K B Saraf

    2009-04-01

    The growth of mixed crystals of BaCa1–(IO3)4 were carried out with simple gel method. The effect of various parameters such as pH of gel solution, gel concentration, gel setting time, concentration of reactants on the growth was studied. Crystals having different morphologies and habits were obtained. The grown crystals were characterized by XRD, FT–IR, EDAX, TGA, DTA and DSC.

  15. Book review: Border encounters: asymmetry and proximity at Europe’s frontiers, edited by Jutta Lauth Bacas and William Kavanagh

    OpenAIRE

    White, Anne

    2014-01-01

    "Border Encounters: Asymmetry and Proximity at Europe’s Frontiers." Jutta Lauth Bacas and William Kavanagh (eds.). Berghahn Books. November 2013. --- Among the tremendous changes affecting Europe in recent decades, those concerning political frontiers have been some of the most significant. International borders are being opened in some regions while being redefined or reinforced in others. Border Encounters is rich in empirical detail, writes Anne White, and is also an excellent introduction...

  16. Imperial County geothermal development annual meeting: summary

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    All phases of current geothermal development in Imperial County are discussed and future plans for development are reviewed. Topics covered include: Heber status update, Heber binary project, direct geothermal use for high-fructose corn sweetener production, update on county planning activities, Brawley and Salton Sea facility status, status of Imperial County projects, status of South Brawley Prospect 1983, Niland geothermal energy program, recent and pending changes in federal procedures/organizations, plant indicators of geothermal fluid on East Mesa, state lands activities in Imperial County, environmental interests in Imperial County, offshore exploration, strategic metals in geothermal fluids rebuilding of East Mesa Power Plant, direct use geothermal potential for Calipatria industrial Park, the Audubon Society case, status report of the Cerro Prieto geothermal field, East Brawley Prospect, and precision gravity survey at Heber and Cerro Prieto geothermal fields. (MHR)

  17. Geothermal heat can cool, too

    International Nuclear Information System (INIS)

    This article takes a look at how geothermal energy can not only be used to supply heating energy, but also be used to provide cooling too. The article reports on a conference on heating and cooling with geothermal energy that was held in Duebendorf, Switzerland, in March 2008. The influence of climate change on needs for heating and cooling and the need for additional knowledge and data on deeper rock layers is noted. The seasonal use of geothermal systems to provide heating in winter and cooling in summer is discussed. The planning of geothermal probe fields and their simulation is addressed. As an example, the geothermal installations under the recently renewed and extended 'Dolder Grand' luxury hotel in Zurich are quoted. The new SIA 384/6 norm on geothermal probes issued by the Swiss Association of Architects SIA is briefly reviewed.

  18. Geothermal systems: Principles and case histories

    Science.gov (United States)

    Rybach, L.; Muffler, L. J. P.

    The classification of geothermal systems is considered along with the geophysical and geochemical signatures of geothermal systems, aspects of conductive heat transfer and regional heat flow, and geothermal anomalies and their plate tectonic framework. An investigation of convective heat and mass transfer in hydrothermal systems is conducted, taking into account the mathematical modelling of hydrothermal systems, aspects of idealized convective heat and mass transport, plausible models of geothermal reservoirs, and preproduction models of hydrothermal systems. Attention is given to the prospecting for geothermal resources, the application of water geochemistry to geothermal exploration and reservoir engineering, heat extraction from geothermal reservoirs, questions of geothermal resource assessment, and environmental aspects of geothermal energy development. A description is presented of a number of case histories, taking into account the low enthalpy geothermal resource of the Pannonian Basin in Hungary, the Krafla geothermal field in Northeast Iceland, the geothermal system of the Jemez Mountains in New Mexico, and extraction-reinjection at the Ahuachapan geothermal field in El Salvador.

  19. Gas geochemistry of Los Humeros geothermal field, Mexico; Geoquimica de gases del campo geotermico de Los Humeros, Puebla, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Barragan R, Rosa Maria; Arellano G, Victor M; Nieva G, David; Portugal M, Enrique; Garcia G, Alfonso; Aragon A, Alfonso [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Torres A, Ignasio S [Centro de Investigacion en Energia, Temixco, Morelos (Mexico); Tovar A, Rigoberto [Comision Federal de Electricidad, Los Humeros, Puebla (Mexico)

    1999-12-01

    Gas data of Los Humeros geothermal field were analyzed. A new method, which is based on the Fischer-Tropch reactions and on the combined pyrite-magnetite mineral equilibrium, was used. Reservoir temperature and reservoir excess steam were estimated for the starting stage of the field by using early data taken from producing wells at controlled conditions. The same parameters were also obtained for the present stage by using 1997 gas data. Reservoir temperatures ranged from 275 and 337 Celsius degrees and positive values for reservoir excess steam fractions were obtained for the starting stage. For well H-1 no excess steam was found since this well was fed by the shallower liquid-dominated reservoir. Results for 1997 showed lower scattering compared to early data and the possible occurrence of a heating process in the shallower stratum which could due to exploitation. [Spanish] En este articulo se presenta un analisis de datos de la fase gaseosa producida por pozos productores del campo geotermico de Los Humeros mediante un metodo que considera el equilibrio de la reaccion de Fischer-Tropsh y el equilibrio de minerales pirita-hematia y pirita-magnetita. Este metodo provee la temperatura del yacimiento y el exceso de vapor presente en la descarga total de los pozos. Los resultados se discuten tanto para el estado inicial del yacimiento utilizando los primeros datos de produccion en los que el flujo del pozo estuvo controlado y los obtenidos en 1997 que representan el estado actual del yacimiento. En el estado inicial se estimaron temperaturas de yacimiento de entre 275 y 337 grados Celsius y excesos de vapor positivos, con excepcion del pozo H-1 que se alimenta del estrato somero dominado por liquido. Los resultados obtenidos para 1997 muestran una dispersion menor y la probable ocurrencia de un proceso de calentamiento del estrato somero propiciado por la explotacion.

  20. Breakdown of doublet recirculation and direct line drives by far-field flow in reservoirs: implications for geothermal and hydrocarbon well placement

    Science.gov (United States)

    Weijermars, R.; van Harmelen, A.

    2016-07-01

    An important real world application of doublet flow occurs in well design of both geothermal and hydrocarbon reservoirs. A guiding principle for fluid management of injection and extraction wells is that mass balance is commonly assumed between the injected and produced fluid. Because the doublets are considered closed loops, the injection fluid is assumed to eventually reach the producer well and all the produced fluid ideally comes from stream tubes connected to the injector of the well pair making up the doublet. We show that when an aquifer background flow occurs, doublets will rarely retain closed loops of fluid recirculation. When the far-field flow rate increases relative to the doublet's strength, the area occupied by the doublet will diminish and eventually vanishes. Alternatively, rather than using a single injector (source) and single producer (sink), a linear array of multiple injectors separated by some distance from a parallel array of producers can be used in geothermal energy projects as well as in waterflooding of hydrocarbon reservoirs. Fluid flow in such an arrangement of parallel source-sink arrays is shown to be macroscopically equivalent to that of a line doublet. Again, any far-field flow that is strong enough will breach through the line doublet, which then splits into two vortices. Apart from fundamental insight into elementary flow dynamics, our new results provide practical clues that may contribute to improve the planning and design of doublets and direct line drives commonly used for flow management of groundwater, geothermal and hydrocarbon reservoirs.

  1. Correlation of wireline log characteristics with hydrothermal alteration and other reservoir properties of the Salton Sea and Westmorland geothermal fields, Imperial Valley, California, USA

    Energy Technology Data Exchange (ETDEWEB)

    Muramoto, F.S.; Elders, W.A.

    1984-05-01

    A detailed study of wireline logs from 11 wells in the Salton Sea and Westmorland geothermal systems was undertaken in order to determine the effects of hydrothermal alteration on the response of electrical and gamma-gamma density well logs. For the Salton Sea geothermal field, definite correspondence between log responses and hydrothermal mineralogy is evident, which in turn is related to the physical properties of the rocks. Three hydrothermal and one unaltered zone can be identified from log data on shales. These are: (1) the unaltered montmorillonite zone (<100/sup 0/ to 190/sup 0/C); (2) the illite zone (100/sup 0/ to 190/sup 0/C to 230/sup 0/ to 250/sup 0/C); (3) the chlorite zone (230/sup 0/ to 250/sup 0/C to 290/sup 0/ to 300/sup 0/C); and (4) the feldspar zone (>290/sup 0/ to 300/sup 0/C). The characteristic responses on well logs by which these zones are identified result primarily from changes in clay mineralogy of the shales and increases in density with progressive hydrothermal metamorphism. In the Westmorland geothermal field, differentiating mineral zones from log responses was only partially successful. However, analyses of both well log and petrologic data for wells Landers 1 and Kalin Farms 1 suggest that the former is heating up and the latter is cooling.

  2. Breakdown of doublet re-circulation and direct line drives by far-field flow in reservoirs: Implications for geothermal and hydrocarbon well placement

    Science.gov (United States)

    Weijermars, R.; van Harmelen, A.

    2016-04-01

    An important real world application of doublet flow occurs in well design of both geothermal and hydrocarbon reservoirs. A guiding principle for fluid management of injection and extraction wells is that mass balance is commonly assumed between the injected and produced fluid. Because the doublets are considered closed loops, the injection fluid is assumed to eventually reach the producer well and all the produced fluid ideally comes from stream tubes connected to the injector of the well pair making up the doublet. We show that when an aquifer background flow occurs, doublets will rarely retain closed loops of fluid re-circulation. When the far-field flow rate increases relative to the doublet's strength, the area occupied by the doublet will diminish and eventually vanishes. Alternatively, rather than using a single injector (source) and single producer (sink), a linear array of multiple injectors separated by some distance from a parallel array of producers can be used in geothermal energy projects as well as in waterflooding of hydrocarbon reservoirs. Fluid flow in such an arrangement of parallel source-sink arrays is shown to be macroscopically equivalent to that of a line doublet. Again, any far-field flow that is strong enough will breach through the line doublet, which then splits into two vortices. Apart from fundamental insight into elementary flow dynamics, our new results provide practical clues that may contribute to improve the planning and design of doublets and direct line drives commonly used for flow management of groundwater, geothermal and hydrocarbon reservoirs.

  3. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>20122531 Hu Lingzhi ( Institute of Geological Engineering Design & Research of Beijing,Miyun 101500,China );Wang Jiankang Discussion on the Feasibility of Geothermal Resources Development and Utilization in Miyun District,Beijing ( City Geology,ISSN1007-1903,CN11-5519 / P,6 ( 3 ), 2011,p.34-35,59 ,) Key words:geothermal resources,Beijing Geothermal,as a new type of clean energy with the integrated trinity of " heat energy-mineral resource-water resource ",

  4. A Status Report on the Exploitation Conditions of the Ahuachapan Geothermal Field

    Energy Technology Data Exchange (ETDEWEB)

    Rivera-R., Jesus; Vides-R., Alberto; Cuellar, Gustavo; Samaniego-V., Fernando; Neri-I, Gustavo

    1983-12-15

    The present exploitation conditions of the Ahuachapan field are discussed. The high well density in a small area has resulted in a significant reservoir pressure decrease due to the inherent reservoir over-exploitation. The average pressure in the exploitation zone has decreased from the 1975 value of 34 kg/cm{sup 2} to the May 1983 value of 23 kg/cm{sup 2}. The production decline characteristics of the Ahuachapan wells were examined, concluding that all wells but Ah-22 show exponential decline. The cumulative production-reinjection for the field up to April 1983 is 159.090 x 10{sup 6} tons, and 37.592 x 10{sup 6} tons, respectively. The effect of reinjection upon field behavior is evident when observing the pressure decline characteristics of the field. It is seen that for indection fraction related to total mass extracted above 30 percent, the average decline pressure in the production area becomes approximately stabilized. If this condition is not met the reservoir pressure decreases sharply. From this finding it is concluded that a careful and properly planned reinjection program is a must for the field. The observed temperature reduction in some of the wells seems to be the result of two operating mechanisms. First, we have the pressure decline that produces water vaporization and the consequent temperature descend. Analysis of information available shows no clear indication of deleterious temperature effects on the producing wells due to injection. The only exception observed to date is well Ah-5 that because its close distance and its relative structural position and direct hydraulic connection to injector Ah-29, presented conditions for fast displacement of the thermal front, resulting in unsufficient contact area and residence time for reheating of the injected water.

  5. Numerical simulation of heat production potential from hot dry rock by water circulating through two horizontal wells at Desert Peak geothermal field

    International Nuclear Information System (INIS)

    In this work, heat production potential from hot dry rock by water circulating through two horizontal wells was numerically investigated based on the geological data of well DP23-1 under the enhanced geothermal system (EGS) project at Desert Peak geothermal field. The results indicate that the desirable electricity production power and energy efficiency can be obtained under suitable reservoir permeability, water production rate and injection temperature; meanwhile water flow impedance remains at a relative lower level. The sensitivity analysis indicates that the electricity production power mainly depends on the water production rate and the injection temperature; the water flow impedance mainly depends on the reservoir permeability, water production rate and injection temperature; the energy efficiency mainly depends on the reservoir permeability and the water production rate. The heat production performance will be improved when the reservoir permeability, the water production rate and the injection temperature are under reasonable conditions. However, this study is based on that the fractured reservoir is equivalent to a homogeneous porous medium and there is no water loss in the reservoir, so the practical energy output and efficiency of water circulating through two horizontal wells at Desert Peak geothermal field needs further study in the future. - Highlights: • We established a numerical model of two horizontal-well enhanced geothermal system. • Desirable heat production performance can be obtained under suitable conditions. • Electricity power depends on water injection rate and injection temperature. • Reservoir impedance depends on reservoir permeability, water production rate and injection temperature. • Energy efficiency depends on reservoir permeability and water production rate

  6. Geothermal Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Leffel, C.S., Jr.; Eisenberg, R.A.

    1977-06-01

    This handbook is intended to assist the physicist, chemist, engineer, and geologist engaged in discovering and developing geothermal energy resources. This first section contains a glossary of the approximately 500 most frequently occurring geological, physical, and engineering terms, chosen from the geothermal literature. Sections 2 through 8 are fact sheets that discuss such subjects as geothermal gradients, rock classification, and geological time scales. Section 9 contains conversion tables for the physical quantities of interest for energy research in general and for geothermal research in particular.

  7. Geothermal energy

    International Nuclear Information System (INIS)

    Geothermal energy has shown a revival for several years and should strongly develop in a near future. Its potentiality is virtually unexhaustible. Its uses are multiple and various: individual and collective space heating, heat networks, power generation, heat storage, heat exchanges etc.. Re-launched by the demand of renewable energy sources, geothermal energy has become credible thanks to the scientific works published recently which have demonstrated its economical and technical relevance. Its image to the public is changing as well. However, lot of work remains to do to make geothermal energy a real industry in France. Several brakes have to be removed rapidly which concern the noise pollution of geothermal facilities, the risk of bad results of drillings, the electricity costs etc. This dossier gives an overview of today's main research paths in the domain of geothermal energy: 1 - geothermal energy in France: historical development, surface and deep resources, ambitions of the French national energy plan (pluri-annual investment plan for heat generation, incentives, regional 'climate-air-energy' schemes), specific regulations; 2 - geothermal energy at the city scale - sedimentary basins: Ile-de-France 40 years of Dogger reservoir exploitation, potentialities of clastic reservoirs - the Chaunoy sandstones example; 3 - geothermal power generation: conventional reservoirs - the Bouillante model (Guadeloupe, French Indies); the Soultz-sous-Forets pilot plant (Bas-Rhin, France); the supercritical reservoirs - the Krafla geothermal area (Iceland). (J.S.)

  8. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20150342Guan Yu(Geo-Environment Monitoring Station of Anhui Province,Hefei230001,China);Chen Xun On Shallow Geothermal Energy Investigation in Urban Planning Zone of Bengbu in Anhui Province(Journal of Geology,ISSN1674-3636,CN32-1796/P,38(1),2014,p.88-93,2illus.,4tables,6refs.)Key words:geothermal energy,Anhui Province The authors conducted studies on shallow geothermal energy in urban planning zone in Bengbu of Anhui Province,depicted the geological settings of shallow geothermal energy,analyzed the natural features,heat exchange

  9. Rapid, high-temperature, field test method for evaluation of geothermal calcium carbonate scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1986-09-01

    A new test method is described that allows the rapid field testing of calcium carbonate scale inhibitors at 500/sup 0/F (260/sup 0/C). The method evolved from use of a full-flow test loop on a well with a mass flow rate of about 1 x 10/sup 6/ lbm/hr (126 kg/s). It is a simple, effective way to evaluate the effectiveness of inhibitors under field conditions. Five commercial formulations were chosen for field evaluation on the basis of nonflowing, laboratory screening tests at 500/sup 0/F (260/sup 0/C). Four of these formulations from different suppliers controlled calcium carbonate scale deposition as measured by the test method. Two of these could dislodge recently deposited scale that had not age-hardened. Performance-profile diagrams, which were measured for these four effective inhibitors, show the concentration interrelationship between brine calcium and inhibitor concentrations at which the formulations will and will not stop scale formation in the test apparatus. With these diagrams, one formulation was chosen for testing on the full-flow brine line. The composition was tested for 6 weeks and showed a dramatic decrease in the scaling occurring at the flow-control valve. This scaling was about to force a shutdown of a major, long-term flow test being done for reservoir economic evaluations. The inhibitor stopped the scaling, and the test was performed without interruption.

  10. Interaction between the geothermal outflow of southern Negros geothermal field and the shallow groundwater aquifer in Dumaguete City, Negros Oriental, Philippines

    International Nuclear Information System (INIS)

    minor dilution effect from precipitation. Drawdown in the deep geothermal reservoir have induced more than 500 meters of drawdown in the center of the resource but not enough to revert the naturally outflowing fluids from the Palinpinon thermal springs. Hence, there exists continuous natural migration of slightly mineralized geothermal fluids into the shallow groundwater aquifer of Dumaguete City. (author)

  11. Geothermal energy

    International Nuclear Information System (INIS)

    Geothermal energy is the natural heat of the earth. It represents an inexhaustible source of energy. In many countries, which are mostly located within the geothermal belts of the world, geothermal energy is being used since many decades for electricity generation and direct heating applications comprising municipal, industrial and agricultural heating. Outside the geothermal anomalous volcanic regions, hot ground water from deep rock formations at temperatures above 70oC is used for process heat and space heating. Low prices for gas and oil hinder the development of geothermal plants in areas outside positive geothermal anomalies; the cost of drilling to reach depths, where temperatures are above 50oC to 70oC, is high. The necessary total investment per MWth installed capacity is in the order of 5 Mio- DM/MWth (3 Mio $/MWth). Experience shows, that an economic break even with oil is reached at an oil price of 30$ per barrel or if an adequate bonus for the clean, environmentally compatible production of geothermal heat is granted. Worldwide the installed electric capacity of geothermal power plants is approximately 6 000 MWe. About 15 000 MWth of thermal capacity is being extracted for process heat and space heat. The importance of the terrestrial heat as an energy resource would be substantially increased, if the heat, stored in the hot crystalline basement could be extracted at economical production costs. Geothermal energy is a competitive energy source in areas with high geothermal gradients (relative low cost for drilling) and would be competitive in areas with normal geothermal gradients, if a fair compensation for environmental implications from fossil and nuclear power production would be granted. (author) 2 figs., 1 tab., 6 refs

  12. The Larderello-Travale geothermal field (Tuscany, central Italy): seismic imaging as a tool for the analysis and assessment of the reservoir

    Science.gov (United States)

    Anselmi, M.; Piccinini, D.; Casini, M.; Spinelli, E.; Ciuffi, S.; De Gori, P.; Saccorotti, G.; chiarabba, C.

    2013-12-01

    The Larderello-Travale is a geothermal field with steam-dominated reservoirs (1300 kg/s of steam and running capacity of 700 MWatt), which is exploited by Enel Green Power, the electric company involved in the renewable energy and resources. The area is located in the pre-Apennine belt of southern Tuscany and has been characterized by extensional tectonics and sporadic events of compression. The result of these tectonic phases is a block-faulting structure with NW-SE trending horsts and basins. Small post-orogenic granitic stocks were emplaced along the main axes of the uplifted structures, causing the anomalous heat flow that marks the area. Results from seismic reflection lines crossing the study area show the presence of the top of a discontinuous reflector in the 3-8 km depth range and with thickness up to ~1 km, referred to as the ';K-horizon'. In this framework we present the results obtained by the processing of a high-quality local earthquake dataset, recorded during the 1977-2005 time interval by the seismic network managed by Enel Green Power. The geothermal target volume was parameterized using a 3-D grid for both Vp (P-wave velocities) and Qp (quality factor of P-waves). Grid nodes are spaced by 5 and 2 km along the two horizontal and vertical directions, respectively. The tomographic Vp images show an overall velocity increase with depth down to the K-horizon. Conversely, some characteristic features are observed in the distribution of Qp anomalies, with high Qp values in the 300-600 range located just below the K-horizon. The relationship between K-horizon and the seismicity distribution doesn't show a clear and homogeneous coupling: the bulk of re-located earthquakes are placed either above or below the top of the K-horizon in the shallower 8 km depth, with an abrupt cut-off at depth greater than 10 km. We then present the preliminary result from the G.A.P.S.S. (Geothermal Area Passive Seismic Sources) experiment, a project that the Istituto

  13. Silicon isotope fractionation during silica precipitation from hot-spring waters: Evidence from the Geysir geothermal field, Iceland

    Science.gov (United States)

    Geilert, Sonja; Vroon, Pieter Z.; Keller, Nicole S.; Gudbrandsson, Snorri; Stefánsson, Andri; van Bergen, Manfred J.

    2015-09-01

    This study aims to explore the extent and controls of silicon isotope fractionation in hot spring systems of the Geysir geothermal area (Iceland), a setting where sinter deposits are actively formed. The δ30Si values of dissolved silica measured in the spring water and sampling sites along outflowing streams, covering a temperature range between 20 and 100 °C, were relatively constant around +0.2‰, whereas the δ30Si signatures of associated opaline sinters from the streambeds were between -0.1‰ and -4.0‰, becoming progressively more negative in the downstream parts of the aprons. Here, the deposited sinters represent some of the most 30Si depleted abiotically produced terrestrial materials documented to date. Compared to the data reported for Icelandic basalts, considered to be the source of the silicon, the δ30Si values of the fluids and sinter deposits are higher and lower, respectively. The resulting values for apparent solid-water isotope fractionation (Δ30Sisolid-water) decreased with decreasing temperature from ca. -0.7‰ at ∼80 °C to -3.7‰ at ∼20 °C, locally down to -4.4‰. This temperature relationship was reproducible in each of the investigated hot spring systems and is qualitatively consistent with recent findings in laboratory experiments on kinetic fractionation for a flowing fluid. However, the apparent fractionation magnitudes observed in the field are ca. -2‰ more negative and thus significantly larger. We infer that solid-water silicon isotope fractionation during deposition of amorphous silica from a flowing fluid correlates inversely with temperature, but is essentially a function of the precipitation rate, such that the fractionation factor decreases with increasing rate. As an important corollary, the effective fractionation behavior during precipitation of silica from saturated solutions is a system-dependent feature, which should be taken into account when using silicon isotopes for paleo-environmental reconstructions.

  14. Is otolith microchemistry (Sr: Ca and Ba:Ca ratios) useful to identify Mugil curema populations in the southeastern Caribbean Sea?

    Science.gov (United States)

    Avigliano, E; Callicó-Fortunato, R; Buitrago, J; Volpedo, A V

    2015-11-01

    The aim of the present study was to evaluate the potential use of otolith microchemistry (Sr:Ca and Ba:Ca ratios) to identify silver mullet, Mugil curema, populations in Southeastern Caribbean Sea. Fish samples were collected in 7 areas of Nueva Esparta State (Venezuela). The otolith Sr:Ca and Ba:Ca ratios and water Sr:Ca were determined (by ICP-OES and EDTA volumetric method). Otoliths Sr:Ca and Ba:Ca ratios and Sr:Ca partition coefficient of mullets in Cubagua island (south of the State) were significantly different from ratios in La Guardia (north of the State). A discriminant analysis of otolith Sr:Ca and Ba:Ca ratios separated Cubagua Island from La Guardia values. These results suggest the existence of different mullet groups in the Southeastern Caribbean Sea. For this, the simultaneous use of Sr:Ca and Ba:Ca ratios could be a potential tool to identify populations in the study area. PMID:26628220

  15. Characterizing Fractures in Geysers Geothermal Field by Micro-seismic Data, Using Soft Computing, Fractals, and Shear Wave Anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Aminzadeh, Fred [Univ. of Southern California, Los Angeles, CA (United States); Sammis, Charles [Univ. of Southern California, Los Angeles, CA (United States); Sahimi, Mohammad [Univ. of Southern California, Los Angeles, CA (United States); Okaya, David [Univ. of Southern California, Los Angeles, CA (United States)

    2015-04-30

    The ultimate objective of the project was to develop new methodologies to characterize the northwestern part of The Geysers geothermal reservoir (Sonoma County, California). The goal is to gain a better knowledge of the reservoir porosity, permeability, fracture size, fracture spacing, reservoir discontinuities (leaky barriers) and impermeable boundaries.

  16. Geothermal industry assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  17. Reinjection into geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Bodvarsson, G.S.; Stefansson, V.

    1987-08-01

    Reinjection of geothermal wastewater is practiced as a means of disposal and for reservoir pressure support. Various aspects of reinjection are discussed, both in terms of theoretical studies as well as specific field examples. The discussion focuses on the major effects of reinjection, including pressure maintenance and chemical and thermal effects. (ACR)

  18. California's geothermal resource potential

    Science.gov (United States)

    Leibowitz, L. P.

    1978-01-01

    According to a U.S. Geological Survey estimate, recoverable hydrothermal energy in California may amount to 19,000 MW of electric power for a 30-year period. At present, a geothermal installation in the Geysers region of the state provides 502 MWe of capacity; an additional 1500 MWe of electric generating capacity is scheduled to be in operation in geothermal fields by 1985. In addition to hydrothermal energy sources, hot-igneous and conduction-dominated resources are under investigation for possible development. Land-use conflicts, environmental concerns and lack of risk capital may limit this development.

  19. PENGARUH FASILITAS PERPUSTAKAAN DAN KINERJA PUSTAKAWAN TERHADAP MINAT BACA SISWA SMK NEGERI 9 SEMARANG TAHUN 2014/2015

    Directory of Open Access Journals (Sweden)

    Rudi Irianto

    2015-06-01

    Full Text Available Minat baca siswa yang tinggi tentunya dipengaruhi oleh beberapa faktor, seperti fasilitas perpustakaan dan kinerja pustakawan yang ada di perpustakaan SMK Negeri 9 Semarang. Permasalahan dalam penelitian ini yaitu kurangnya fasilitas perpustakaan yang memadai, rendahnya ketrampilan pustakawan SMK Negeri 9 Semarang. Metode pengumpulan data yang digunakan adalah metode angket dan observasi. Teknik analisis data menggunakan analisis deskriptif persentase, asumsi klasik dan analisis regresi linear berganda. Uji keberartian persamaan regresi dilihat dari uji Fhitung = 188,745 dengan probabilitas sebesar 0,000 < 0,05 sehingga diperoleh hasil analisis regresi linear berganda dengan persamaan Y = 4,045 + 0,56X1 + 0,567X2. Besarnya pengaruh secara simultan antara fasilitas perpustakaan dan kinerja pustakawan terhadap minat baca yaitu 58%. Pengaruh secara parsial variabel fasilitas perpustakaan terhadap minat baca sebesar 21,44%, sedangkan untuk variabel kinerja pustakawan adalah sebesar 26,73%. High of student interest in reading must be influenced by several factors, such as library facilities and the performance of librarians in the library Vocational High School 9 Semarang. Problems in this study is the lack of adequate library facilities, lack of skills librarians SMK 9 Semarang. Data collection method used is the method of questionnaire and observation. Data were analyzed using descriptive analysis of the percentage, classical assumptions and multiple linear regression analysis. The significance of the test equation as calculated from the F test was 188.745 with probability was 0.000 < 0.05, while the results of multiple linear regression analysis with the equation Y = 4.045 + 0.56X1 + 0.567X2. The simultaneous influence of library facilities and performance of librarian toward the student interest in reading was 58%. The influence of partial variabel library facilities for reading of 21.44%, while for the variabel performance of the librarian was

  20. A Strategy for Interpretation of Microearthquake Tomography Results in the Salton Sea Geothermal Field Based upon Rock Physics Interpretations of State 2-14 Borehole Logs

    Energy Technology Data Exchange (ETDEWEB)

    Bonner, B; Hutchings, L; Kasameyer, P

    2006-06-14

    We devise a strategy for analysis of Vp and Vs microearthquake tomography results in the Salton Sea geothermal field to identify important features of the geothermal reservoir. We first interpret rock properties in State 2-14 borehole based upon logged core through the reservoir. Then, we interpret seismic recordings in the well (Daley et al., 1988) to develop the strategy. We hypothesize that mapping Poisson's ratio has two applications for the Salton Sea geothermal reservoir: (1) to map the top of the reservoir, and (2) as a diagnostic for permeable zones. Poisson's ratio can be obtained from Vp and Vs. In the State 2-14 borehole, Poisson's ratio calculated from large scale averages ({approx} 150 m) shows a monotonic decrease with depth to about 1300 m, at which point it increases with depth. Our model is that the monotonic decrease is due to compaction, and the increase below 1300 m is due to the rocks being hydrothermally altered. We hypothesize we can map the depth to alteration by identifying the transition from decreasing to increasing values; and thus, map the top of the reservoir, which is associated with a known increase in sulfite, chlorite, and epidote alteration that may be indicative of hydrothermal activity. We also observe (from Daley et. al. plots) an anomalous drop in Poisson's ratio at a depth of about 900 m, within a sandstone formation. The sandstone has a P-wave velocity significantly higher than the siltstone above it but a lower velocity in the lower half of the formation relative to the upper half. We interpret the relative decrease in velocity to be due to fracturing and chemical alteration caused by permeability. We conclude that using Vp and Vs tomography results to obtain images of Poisson's ratio has the potential to identify significant features in the geothermal reservoir in this geologic setting. Seismic attenuation tomography results (mapped as Qp and Qs) should also be useful for evaluating geothermal

  1. Seismic activity at the Las Tres Virgenes, B. C. S, Mexico, geothermal field. Actividad sismica del campo geotermico de Las Tres Virgenes, Baja California Sur, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero Guadarrama, Jose Luis (Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico))

    1998-05-15

    A study of the seismic activity at Las Tres Virgenes Geothermal field in Baja California Sur (Baja California Sur), Mexico is presented. Four monitoring periods are comprised: 28 January to 12 May 1993; 5 January to 24 April 1994; 25 May to 19 August 1995 and 30 August to 02 November 1995. The influence of the geological structure on the seismic activity of the field was considered by means of: a velocities model based on field geology, borehole data, a reflection seismic profile, considerations on the thermal gradient in the zone, and local and regional geophysical models. Site corrections that were considered necessary to improve the velocities model were determined trough simulation runs of seismic events at 4 km depth with reference to sea level and to a mean topographic height of 400 m. Main interpretation consists in the correlation of epicenters with the volcanic edifices and tectonics, identifying the maximum activity zones related with geothermal interest areas. Registered seismic information constitutes a framework for the study of the future seismic activity during reservoir exploitation.

  2. Simulacija rafala višecevnog bacača raketa / MLRS salvo simulation

    Directory of Open Access Journals (Sweden)

    Marko S. Holclajtner

    2010-04-01

    Full Text Available U radu je predstavljena procedura za efikasno simuliranje rafala višecevnog bacača raketa i uticaja rakete na ostale delove sistema. Analizirano je ponašanje rakete u odnosu na referentnu idealnu trajektoriju, koju generiše idealna raketa. Kvalitet rafalne vatre je rasturanje padnih tačaka na cilju što je mera preciznosti i tačnosti. U radu je razmatran samo uticaj preciznosti, tj. rasturanja raketa, pri čemu se smatra da je greška tačnosti zanemarljiva. Na taj način identifikuju se sopstveni (municijski uticaji na fenomen rasturanja trajektorija. Rasturanje na cilju upoređeno je sa rasturanjem na kraju aktivne faze u takozvanim estimatorskim koordinatama (detektorskoj ravni i biće utvrđena njihova korelacija. / This paper presents a procedure for an efficient simulation of MLRS barrage fire as well as of the effects of rocket parameters. The rocket behavior will be analyzed with reference to an ideal trajectory generated by an ideal rocket. The quality of MLRS fire is expressed through dispersion of impact points in the target area thus representing precision and accuracy. This work assumes absolutely correct accuracy and concentrates primarily on the effects of precision i. e. on the dispersion of rockets. Other types of effects on rocket dispersion, such as those of atmosphere, launching, etc. are neglected. The ammunition effects on the trajectory dispersion will be thus identified. The dispersion in the target area will be correlated with the dispersion of trajectory points at the end of the active (rocket motor burn out phase.

  3. Capabilities to measure geothermal material properties at simulated in situ conditions. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Enniss, D.O.; Butters, S.W.; Lingle, R.; Van Buskirk, R.G.; Prater, F.R.

    1979-07-01

    The lack of reservoir material property data has been identified as a major obstacle to geothermal development and commercialization. To meet this need a high pressure/high temperature test facility was designed and constructed at Terra Tek under Department of Energy funding. Testing capabilities include confining and pore fluid pressure to 200 MPa and temperatures to 535/sup 0/C. Rock samples to 10.2 cm diameter can be accommodated. The program summarized herein is the second year (October 1977-September 1978) effort. Test techniques were developed to meet the geothermal community needs and tests were conducted to determine: mechanical properties, thermal conductivity, thermal diffusivity, thermal expansion, permeability, electrical resistivity and ultrasonic velocities. Sandstones, graywackes, granites, and basalts, from KGRA's in Baca, New Mexico; Milford, Utah; Geysers, California and Northern Nevada, respectively were characterized.

  4. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20112453 Li Qing (First Design and Research Institute,Ministry of Mechanical Industry, Bengbu 233000, China); Li Yixiang Application of Shallow Geothermal Energy Resources in the Hefei Area(Geology

  5. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20151782 Ding Zhaoqin(Institute of Geophysical Exploration of Jilin Province,Changchun130012,China);Xu Zhihe The Possibility of Structure and Occurrence Geothermal Resources in Dunhua-Mishan Fault Zone(Huinan Section)(Jilin Geology,ISSN1001-2427,CN22-1099/P,33(2),2014,p.98-102,5illus.,1table,4refs.)Key words:geothermal resources,fracture

  6. World Geothermal Congress WGC-2015

    Science.gov (United States)

    Tomarov, G. V.; Shipkov, A. A.

    2016-08-01

    This article discusses materials and results of the World Geothermal Congress that was held in Melbourne (Australia) from April 19 to April 25, 2015. Information on the extent and technological features of utilization of geothermal resources for heat supply and power production, as well as in other economic areas, is given. A stable growth in the capacity and number of geothermal power systems that is determined by ecological cleanliness, economic efficiency, and the highest (among renewable energy sources) indicators of installed capacity utilization is shown. It was noted that combined schemes of geothermal power plants (GPPs), such as turbine units of different type (binary units, units with one or two separation pressures, etc.), have become more frequently used to increase the efficiency of utilization of geothermal heat carrier. Actual data determining room heating systems with the total worldwide capacity of nearly 50000 MW thermal (MWt) as the most currently significant segment of consumption of geothermal waters are given. In addition, geothermal resources are also utilized in soil pumps, balneological and sports basins, greenhouse complexes, and other manufactures. It was noted that geological studies were carried out in more than 40 countries, with the development of methods of simulation of tanks for the existing and new geothermal fields. Trends of development and the role of geothermal power engineering in the energy supply of many countries are shown. It was shown that prospects for the development of geothermal power generation are significantly associated with utilization of low-temperature geothermal sources in binary power generating units, as well as with the increase in installed capacity of operating geothermal power plants (GPPs) without drilling additional wells, i.e., by using waste geothermal heat carrier in binary-cycle or combined-cycle power plants. The article provides data on a pilot binary power unit at Pauzhetka GPP and on a

  7. Geothermal development and the media

    International Nuclear Information System (INIS)

    The use of geothermal energy, particularly for power generation, is usually poorly understood by the large majority of the populace. Unfamiliarity leads to mistrust and, in a nation with escalating environmental concerns, it can generate conflict. The news media commonly focus upon conflict and may even act as a catalyst to instigate controversy. In attempting to introduce geothermal exploration and the possibility of field development into a new area, it is prudent to facilitate public awareness. This paper is intended to illustrate the importance of effectively dealing with the news media and offers insights on avoidance of pitfalls by relating experiences of conducting geothermal exploration in Oregon

  8. Areas to explore surrounding the Cerro Prieto geothermal field, BC; Areas para exploracion en los alrededores del campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar Dumas, Alvaro [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia General de Cerro Prieto, Mexicali, Baja California (Mexico)]. E-mail: alvaro.aguilar@cfe.gob.mx

    2009-07-15

    Exploration plays an important role in tapping underground natural resources-whether water, oil, natural gas or minerals. Exploratory data allow us to learn reservoir conditions, increasing probable reserves and reservoir life span. Around the Cerro Prieto geothermal field, BC, and in the Mexicali Valley in general, exploration had almost stopped but recently was resumed by the Studies Division of Comision Federal de ELectricidad (CFE)'s Gerencia de Proyectos Geotermoelectricos. The division sent technical personnel to structurally map the northern and eastern portions of Laguna Salada. The paper offers a general outline of the main zones undergoing exploratory studies-studies perhaps culminating in siting exploratory wells to locate more geothermal resources (and ultimately producing them using binary power plants). CFE also wants to site injection wells west of the current production zone, and this is covered, as well. All activities are meant to increase the productive lifespan of the geothermal reservoir. [Spanish] Cuando se trata de la explotacion de recursos naturales del subsuelo, sea agua, gas, petroleo o minerales, la exploracion juega un papel muy importante, ya que permite conocer las condiciones del yacimiento que pudieran llevar a incrementar las reservas de los recursos explotados y extender su vida util. En las zonas aledanas al campo geotermico de Cerro Prieto, BC, y en general en el Valle de Mexicali, la exploracion estaba practicamente detenida habiendose reactivado a raiz de que la Subgerencia de Estudios de la Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad (CFE) envio personal para realizar mapeos estructurales en las porciones norte y oriente de la Laguna Salada. Este trabajo presenta un panorama general de las areas prioritarias para realizar estudios exploratorios y poder programar, con mas bases, pozos exploratorios enfocados a localizar mas recursos geotermicos, inclusive para generar energia por medio

  9. Remote Sensing as a First Step in Geothermal Exploration in the Xilingol Volcanic Field in NE China

    Science.gov (United States)

    Peng, F.; Huang, S.; Xiong, Y.

    2013-12-01

    Geothermal energy is a renewable and low-carbon energy source independent of climate change. It is most abundant in Cenozoic volcanic areas where high temperature can be obtained within a relatively shallow depth. Geological structures play an important role in the transfer and storage of geothermal energy. Like other geological resources, geothermal resource prospecting and exploration require a good understanding of the host media. Remote sensing (RS) has the advantages of high spatial and temporal resolution and broad spatial coverage over the conventional geological and geophysical prospecting techniques, while geographical information system (GIS) has intuitive, flexible, and convenient characteristics. In this study, RS and GIS techniques are utilized to prospect the geothermal energy potential in Xilingol, a Cenozoic volcanic area in the eastern Inner Mongolia, NE China. Landsat TM/ETM+ multi-temporal images taken under clear-sky conditions, digital elevation model (DEM) data, and other auxiliary data including geological maps of 1:2,500,000 and 1:200,000 scales are used in this study. The land surface temperature (LST) of the study area is retrieved from the Landsat images with a single-channel algorithm. Prior to the LST retrieval, the imagery data are preprocessed to eliminate abnormal values by reference to the normalized difference vegetation index (NDVI) and the improved normalized water index (MNDWI) on the ENVI platform developed by ITT Visual Information Solutions. Linear and circular geological structures are then inferred through visual interpretation of the LST maps with references to the existing geological maps in conjunction with the computer automatic interpretation features such as lineament frequency, lineament density, and lineament intersection. Several useful techniques such as principal component analysis (PCA), image classification, vegetation suppression, multi-temporal comparative analysis, and 3D Surface View based on DEM data are

  10. Resistivity Imaging for Geothermal Exploration, using Controlled-Source EM where Magneto-Telluric is Not Applicable: Model and Field Study

    OpenAIRE

    Girard, Jean-François; Coppo, Nicolas; Wawrzyniak, Pierre; Bourgeois, Bernard; Baltassat, Jean-Michel; Gadalia, Alain

    2015-01-01

    International audience Resistivity imaging is a key parameter in most geothermal exploration programs, and particularly in volcanic environment. It is assumed that resistivity variations allow imaging the caprock, but also hydrothermal weathering or preferential water flow. The geothermal fluid is generally brine water which drastically decreases the electrical resistivity and the temperature increase also decreases resistivity. The resistivity signatures for several conceptual geothermal ...

  11. Geothermal Information Dissemination and Outreach

    Energy Technology Data Exchange (ETDEWEB)

    Clutter, Ted J. [Geothermal Resources Council (United States)

    2005-02-18

    Project Purpose. To enhance technological and topical information transfer in support of industry and government efforts to increase geothermal energy use in the United States (power production, direct use, and geothermal groundsource heat pumps). Project Work. GRC 2003 Annual Meeting. The GRC convened the meeting on Oct. 12-15, 2003, at Morelia's Centro de Convenciones y ExpoCentro in Mexico under the theme, International Collaboration for Geothermal Energy in the Americas. The event was also sponsored by the Comision Federal de Electricidad. ~600 participants from more than 20 countries attended the event. The GRC convened a Development of Geothermal Projects Workshop and Geothermal Exploration Techniques Workshop. GRC Field Trips included Los Azufres and Paricutin Volcano on Oct. 11. The Geothermal Energy Association (Washington, DC) staged its Geothermal Energy Trade Show. The Annual Meeting Opening Session was convened on Oct. 13, and included the governor of Michoacan, the Mexico Assistant Secretary of Energy, CFE Geothermal Division Director, DOE Geothermal Program Manager, and private sector representatives. The 2003 Annual Meeting attracted 160 papers for oral and poster presentations. GRC 2004. Under the theme, Geothermal - The Reliable Renewable, the GRC 2004 Annual Meeting convened on Aug. 29-Sept. 1, 2004, at the Hyatt Grand Champions Resort at Indian Wells, CA. Estimated total attendance (including Trade Show personnel, guests and accompanying persons) was ~700. The event included a workshop, Geothermal Production Well Pump Installation, Operation and Maintenance. Field trips went to Coso/Mammoth and Imperial Valley/Salton Sea geothermal fields. The event Opening Session featured speakers from the U.S. Department of Energy, U.S. Department of the Interior, and the private sector. The Geothermal Energy Association staged its Geothermal Energy Trade Show. The Geothermal Education Office staged its Geothermal Energy Workshop. Several local radio and

  12. Geothermal Permeability Enhancement - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Joe Beall; Mark Walters

    2009-06-30

    The overall objective is to apply known permeability enhancement techniques to reduce the number of wells needed and demonstrate the applicability of the techniques to other undeveloped or under-developed fields. The Enhanced Geothermal System (EGS) concept presented in this project enhances energy extraction from reduced permeability zones in the super-heated, vapor-dominated Aidlin Field of the The Geysers geothermal reservoir. Numerous geothermal reservoirs worldwide, over a wide temperature range, contain zones of low permeability which limit the development potential and the efficient recovery of heat from these reservoirs. Low permeability results from poorly connected fractures or the lack of fractures. The Enhanced Geothermal System concept presented here expands these technologies by applying and evaluating them in a systematic, integrated program.

  13. The Obsidian Creep Project: Seismic Imaging in the Brawley Seismic Zone and Salton Sea Geothermal Field, Imperial County, California

    Science.gov (United States)

    Catchings, R. D.; Rymer, M. J.; Goldman, M.; Lohman, R. B.; McGuire, J. J.

    2010-12-01

    In March 2010, we acquired medium- and high-resolution P- and S-wave seismic reflection and refraction data across faults in the Brawley seismic zone (BSZ) and across part of the Salton Sea Geothermal Field (SSGF), Imperial Valley, California. Our objectives were to determine the dip, possible structural complexities, and seismic velocities associated with the BSZ and SSGF. We acquired multiple seismic data sets along a north-south profile and a high-resolution P-wave profile along an east-west profile. The north-south profile included: 1) a 6.4-km-long P-wave (main) profile that was recorded on 320 Texan seismographs spaced at 20-m intervals, 2) a 1.2-km-long cabled, high-resolution profile along the northern end of the main profile, and 3) an approximately 1.2-km-long S-wave profile along the cabled profile. P-wave sources along the main profile were generated by 0.15- to 0.45-kg buried explosions spaced every 40 m, and P-wave sources along the cabled profile were generated by Betsy-Seisgun ‘shots’ spaced every 10 m. S-waves sources were generated by hammer impacts on the ends of an aluminum block. The east-west profile consisted of a 3.4-km-long high-resolution P-wave seismic profile with shots (Betsy-Seisgun) and geophones spaced every 10 m. Preliminary interpretation of shot gathers from blasts in the north-south profile suggests that the BSZ and SSGF are structurally complex, with abundant faults extending to or near the ground surface. Also, we observe relatively high-velocity material, apparent velocities of about 4.0 km/s in one direction and about 2.8 km/s in another relative to about 1.6 km/s for shallower material, that shallows beneath the SSGF. This may be due to high temperatures and resultant metamorphism of buried materials in the SSGF. From preliminary interpretation of shot gathers along the east-west profile we interpret a prominent fault that extends to the ground surface. This fault is on projection of the Kalin fault, from about 40 m to

  14. Geothermal energy

    Science.gov (United States)

    Manzella, A.

    2015-08-01

    Geothermal technologies use renewable energy resources to generate electricity and direct use of heat while producing very low levels of greenhouse-gas (GHG) emissions. Geothermal energy is stored in rocks and in fluids circulating in the underground. Electricity generation usually requires geothermal resources temperatures of over 100°C. For heating, geothermal resources spanning a wider range of temperatures can be used in applications such as space and district heating (and cooling, with proper technology), spa and swimming pool heating, greenhouse and soil heating, aquaculture pond heating, industrial process heating and snow melting. Geothermal technology, which has focused so far on extracting naturally heated steam or hot water from natural hydrothermal reservoirs, is developing to more advanced techniques to exploit the heat also where underground fluids are scarce and to use the Earth as a potential energy battery, by storing heat. The success of the research will enable energy recovery and utilization from a much larger fraction of the accessible thermal energy in the Earth's crust.

  15. Geothermal energy

    Directory of Open Access Journals (Sweden)

    Manzella A.

    2015-01-01

    Full Text Available Geothermal technologies use renewable energy resources to generate electricity and direct use of heat while producing very low levels of greenhouse-gas (GHG emissions. Geothermal energy is stored in rocks and in fluids circulating in the underground. Electricity generation usually requires geothermal resources temperatures of over 100°C. For heating, geothermal resources spanning a wider range of temperatures can be used in applications such as space and district heating (and cooling, with proper technology, spa and swimming pool heating, greenhouse and soil heating, aquaculture pond heating, industrial process heating and snow melting. Geothermal technology, which has focused so far on extracting naturally heated steam or hot water from natural hydrothermal reservoirs, is developing to more advanced techniques to exploit the heat also where underground fluids are scarce and to use the Earth as a potential energy battery, by storing heat. The success of the research will enable energy recovery and utilization from a much larger fraction of the accessible thermal energy in the Earth’s crust.

  16. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20111059 Gao Jinghong(Engineering Group Co.Ltd.of the Second Institute of China Railway,Chengdu 610031,China);Tong Tiegang A Magnetotelluric Study of Geothermal Resources in Kaifeng Depression,Henan Province(Geophysical and Geochemical Exploration,ISSN1000-8918,CN11-1906/P,34(4),2010,p.440-443,6 illus.,12 refs.)Key words:geothermal resources,telluric electromagnetic sounding,Henan Province Kaifeng Depression,located in the southeast corner of the Jiyuan-Kaifeng Depression,is enriched with deep-seated groundwater sources.The rich geothermal water rock(thermal reservoir)commonly has lower resistivity than the in-situ rock,and the reduction degree of its resistivity is related to the extent of water content,water temperature and mineralization.Based on geo-electrical anomaly,the authors inferred the distribution of the thermal reservoirs.A study of the magnetotelluric sounding method(MT)shows that the resistivity values of the basement are lowest in most surveying points north of F1 fault,implying the existence of the relationship with the geothermal water in the strata.According to the distribution of geo-electrical anomalies in the survey area,the authors locate the relatively enriched area of geothermal water in the basement of this area,thus providing an important basis

  17. Ba/Ca in Planktonic Foraminifera as a Recorder of Freshwater Input to the Ocean: Proxy Refinement in the Gulf of Papua, Papua New Guinea

    Science.gov (United States)

    Gibson, K.

    2015-12-01

    In the study of paleoclimate, the past several decades have seen large strides in the advancement of proxies designed to reconstruct changes in sea surface temperature (SST); however, techniques for reconstructing ocean salinity are less well developed. The ratio of Ba/Ca in planktic foraminiferal tests has shown initial promise as a tool for reconstructing salinity in continental margin sites near river mouths. In these environments, Ba/Ca shows an inverse correlation with salinity, and often a less clear correlation to nutrients or indicators of productivity, as is more typical in open-ocean settings. An ideal area in which to apply and test foraminiferal Ba/Ca as a proxy for freshwater input is the Western Pacific Warm Pool (WPWP), where temperatures are relatively stable, but large variations in precipitation are today driven by the El Nino Southern Oscillation (ENSO) and strength of the Australian-Indonesian monsoon. Foraminiferal Ba/Ca in sediments proximal to a river mouth should therefore reflect changes in riverine input, which in turn reflect variations in precipitation on different timescales. We present here planktic foraminiferal δ18O, Ba/Ca, and Mg/Ca records spanning the last glacial-interglacial transition from marine sediment cores in the Gulf of Papua, located in the WPWP. The δ18O records show an increase in the magnitude of glacial-interglacial (G-IG) δ18O change (∆18O) moving away from the coastline and the mouth of the primary local freshwater source, the Fly River. The reduced amplitude in G-IG ∆18O in the cores closer to shore, manifested by more negative δ18O values before ~20 kyr ago, is likely due to freshwater input from the Fly River, with the effects diminishing with distance from the Fly River source. Temperature and sea level are also changing over the deglaciation, however, contributing to the signal recorded in the calcite δ18O. We use planktic Mg/Ca analyses and independent records of sea level change to isolate the

  18. Geothermal Power Development in the Phillippines

    Energy Technology Data Exchange (ETDEWEB)

    Jovellanos, Jose U.; Alcaraz, Arturo; Datuin, Rogelio

    1980-12-01

    The generation of electric power to meet the needs of industrial growth and dispersal in the Philippines is aimed at attaining self-reliance through availment of indigenous energy resources. The Philippines by virtue of her position in the high-heat flow region has in abundance a number of exploitable geothermal fields located all over the country. Results indicate that the geothermal areas of the Philippines presently in various stages of exploration and development are of such magnitude that they can be relied on to meet a significant portion of the country's power need. Large scale geothermal energy for electric power generation was put into operation last year with the inauguration of two 55-MW geothermal generating units at Tiwi, Albay in Southern Luzon. Another two 55-MW units were added to the Luzon Grid in the same year from Makiling-Banahaw field about 70 kilometers south of Manila. For 1979 alone, therefore, 220-MW of generating capacity was added to the power supply coming from geothermal energy. This year a total of 220-MW power is programmed for both areas. This will bring to 443-MW of installed generating capacity from geothermal energy with 3-MW contributed by the Tongonan Geothermal pilot plant in Tongonan, Leyte, Central Philippines in operation since July 1977. Financial consideration of Philippine experience showed that electric power derived from geothermal energy is competitive with other sources of energy and is a viable source of baseload electric power. Findings have proven the technical and economic acceptability of geothermal energy resources development. To realize the benefits that stem from the utilization of indigenous geothermal resources and in the light of the country's ever increasing electric power demand and in the absence of large commercial oil discovery in the Philippines, geothermal energy resource development has been accelerated anew. The program includes development of eight fields by 1989 by adding five more

  19. Geothermal energy in Italy and abroad

    International Nuclear Information System (INIS)

    Geothermal systems and fields are analysed giving particular evidence to the value of the geothermal source as an important natural source of energy. The paper analyses hydrothermal systems and describes the international experimental studies on the use of geothermal reservoirs in hot rocks with geopressured and magmatic systems. Experts are optimistic as far as the use of this innovative source of energy is possible in the medium-short term

  20. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140332 Jiang Lin(School of Earth and Space Sciences,Peking University,Beijing100871,China);Ji Jianqing Geologic Analysis on the Prospects of the Enhanced Geothermal System(EGS)in the Bohaiwan Basin(Geology and Prospecting,ISSN0495-5331,CN11-2043/P,49(1),2013,p.167-178,5illus.,4tables,41refs.)Key words:geothermal systems,Bohaiwan Basin Great amounts of thermal energy is stored ubiquitously in rocks with high tempera-

  1. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20111836 Gao Jian(Sichuan Institute of Geological Survey for Nuclear Industry,Chengdu 610061,China);Shi Yuzhen Feasibility Study of Exploitation of Geothermal Resource in the Lugu Lake Region,Yanyuan,Sichuan Province(Acta Geologica Sichuan,ISSN1006-0995,CN51-1273/P,30(3),2010,p.291-294,1 illus.,1 table,1 ref.,with English abstract)Key words:geothermal water,Sichuan Province20111837 He Jianhua(Geological Brigade 102,Bureau of Geolog

  2. Manejo de morbimortalidad del paciente pediátrico quemado en el hospital "Baca Ortiz" de Quito, Ecuador Handling of morbi-mortality of pediatric burned patient at "Baca Ortiz" hospital, Quito, Ecuador

    Directory of Open Access Journals (Sweden)

    P. Dávalos Dávalos

    2007-09-01

    Full Text Available En la unidad de quemados del Hospital de Niños "Baca Ortiz" de la ciudad de Quito (Ecuador se ha realizado un estudio de la morbimortalidad de pacientes pediátricos ingresados durante el año 2005. La principal causa de quemaduras en nuestro medio son los líquidos hirvientes, con una mayor mortalidad en varones que en mujeres: 2,55% frente a 1,7%. La mortalidad global fue de 4,25% durante el año 2005, notablemente inferior al 17 % que teníamos como media hace 5 años. Existen muchos factores que agravan el pronóstico evolutivo de estos pacientes como son: la edad, superficie corporal quemada, estado nutricional y antecedentes personales. El proceso infeccioso se detecta mediante la clínica; realizamos cultivos de biopsias de piel con un alto porcentaje de positividad de 67,64%. Detectamos resistencia bacteriana y empezamos a utilizar Quinolonas (Ciprofloxacina.We present a study of morbi-mortality of burned children who entered in Burned Unit at "Baca Ortiz" Children Hospital in Quito (Ecuador during 2005. Burns main cause are boiling liquids and mortality is higher in men than in women: 2,55% vs 1,7%. Global mortality during 2005 was of 4,25% with a noted decrease than the one obtained five years ago, which was 17%. There are many factors aggravating patients' evolutional prognosis, such as: age, burned body surface, nutritional status and personal backgrounds. Infectious process is detected by the clinic and tissue biopsies cultivations are made, with a highly positive percentage (67,64%. Antibacterial resistance was detected and we began to use Quinolones (Ciprofloxacin.

  3. Proceedings of NEDO International Geothermal Symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-11

    This is a proceedings of the NEDO International Geothermal Symposium held in Sendai in 1997. The worldwide geothermal energy power generation capacity exceeds 7000 MW. Geothermal energy is widely used also for heating, snow melting, greenhouse cultivation as well as electric power generation. Geothermal energy generates far less CO2 causing the global warming than fossil fuels. The geothermal energy is clean and renewable. Considering the environmental issue and energy supply/demand of the world, we have to exert further efforts for the geothermal development. In this conference, discussions were made on each country`s experiences of the geothermal development, and future prediction and strategies for geothermal utilization in the Asia/Pacific region, in particular. Further, in the technical session, conducted were the IEA study and technical presentation/discussion for technical cooperation. The proceedings includes research reports of more than 30, which are clarified into three fields: impacts of the geothermal development on the environment, technical development of the hot dry rock power generation system, and development of technology for collecting deep-seated geothermal resource

  4. Crustal deformation and gravity changes during the first ten years of exploitation of the new Travale-Radicondoli geothermal field, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Geri, G.; Marson, I.; Rossi, A.; Toro, B.

    1985-01-01

    The results of precise levelling measurements on a specially constructed network of benchmarks in the Travale geothermal area (Tuscany, Italy) revealed that the central part of this area is subsiding and that the average rate of subsidence in the period 1973-1983 was 20-25 mm/year. Three series of horizontal distance measurements were carried out (1980, 1981, 1982) to monitor variations in the coordinates of the bases of a horizontal control net. The variations noted in this time interval range between 13 and 36 mm, slightly exceeding the semi-axis values of their error ellipses. A series of gravity measurements was carried out annually between 1979 and 1982 on a network of gravity benchmarks coinciding with part of the topographic benchmarks. The g variations observed reached a maximum of 40 Gal. A tentative correlation of these data with field exploitation data indicates a possible means of interpreting the variations observed during these surveys.

  5. Geothermal energy

    International Nuclear Information System (INIS)

    To put it simply, geothermal power is the utilization of the earth's natural heat. At many locations around the world, heat from the earth's mantle approaches close to the surface, chiefly in volcanically and or seismically active zones. Magnificent examples include the Big Island of Hawaii, Mount Pinatubo in the Philippines, Yellowstone, and Mt. St. Helens. Commercially viable sources of geothermal energy exist when the heat is close to the surface, a source of water can act as a heat transfer medium, and a geologic setting exists that contains the heat so it concentrates and doesn't dissipate. In addition, the heat must be adequate to provide temperatures at least above 290 degrees F to take advantage of currently available energy conversion technologies. This paper is directed toward the utilization of geothermal energy for power generation. It describes the industry today, the author's view of the benefits of geothermal power, and some measures that could increase the beneficial use of this power source

  6. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    20151090 Bian Huiying(School of Environmental Sciences and Engineering,Chang’an University,Xi’an 10054,China);Wang Shuangming Hydrodynamic Conditions of Geothermal Water in Gushi Depression of Guanzhong Basin(Coal Geology&Exploration;,ISSN1001-1986,CN61-1155/P,42(3),2014,p.50-54,60,9illus.,11refs.,

  7. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20140958 Mei Huicheng(No.915GeologicalBrigade,Jiangxi Bureau of Geology and Mineral Resources,Nanchang 330002,China);Li Zhongshe Geological Features and Causes of the Huihuang Geotherm in Xiushui,Jiangxi Province(Journal of Geological Hazards and

  8. Particle characterization for geothermal operations

    Energy Technology Data Exchange (ETDEWEB)

    Vetter, O.J.; Kandarpa, V.

    1981-01-06

    A detailed summary of an ongoing evaluation of existing particle measuring methodology with emphasis on (a) adapting of existing methods in geothermal operations and (b) further development of existing instrumentation for field use is presented. The various instruments and methods used and/or suggested for particle characterization are described in detail. Theoretical and practical aspects of particle characterizations are outlined. A plan for further laboratory and field experiments is outlined. The instrumentations to be selected after some additional lab and field tests will be used in the studies on (a) formation damage through particle invasion and (b) characterizing and monitoring of particle suspensions in geothermal operations.

  9. The National Geothermal Energy Research Program

    Science.gov (United States)

    Green, R. J.

    1974-01-01

    The continuous demand for energy and the concern for shortages of conventional energy resources have spurred the nation to consider alternate energy resources, such as geothermal. Although significant growth in the one natural steam field located in the United States has occurred, a major effort is now needed if geothermal energy, in its several forms, is to contribute to the nation's energy supplies. From the early informal efforts of an Interagency Panel for Geothermal Energy Research, a 5-year Federal program has evolved whose objective is the rapid development of a commercial industry for the utilization of geothermal resources for electric power production and other products. The Federal program seeks to evaluate the realistic potential of geothermal energy, to support the necessary research and technology needed to demonstrate the economic and environmental feasibility of the several types of geothermal resources, and to address the legal and institutional problems concerned in the stimulation and regulation of this new industry.

  10. Remote sensing in the study of the perspective of enlargement of the geothermal area of Los Azufres field, Michoacan, Mexico; Utilizacion de la teledeteccion para estudiar las perspectivas de ampliacion de la zona geotermica de Los azufres, Michoacan, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Antaramian H, Eduardo; Garduno M, Victor Hugo [UMSNH, (Mexico)

    1999-12-01

    The results are presented of a remote sensing study in Los Azufres Geothermal field. Data of a volcanological study have been used. Standing out is the importance of a resurgence phenomenon in the volcanic evolution of the caldera of Los Azufres and its observed relationships with thermal anomalies outsides the area of well known geothermal resources in the field. On the basis of these data, we suggest additional remote sensing studies in different geothermal areas to identify blind resources or large thermal anomaly outsides the well know ones in developed geothermal fields. [Spanish] En este trabajo se presentan los resultados de un estudio de teledeteccion en la zona geotermica de Los Azufres, Michoacan, Mexico. En el se han utilizado los datos obtenidos de un estudio volcanologico que resalta la importancia de un fenomeno de resurgencia en la evolucion volcanologica de la Caldera de los Azufres y su relacion con anomalias termicas fuera de la zona de explotacion del campo geotermico. Con base en estos resultados se propone que sean retomados los datos de diferentes campos geotermicos con la finalidad de hacer estudios de exploracion mediante teledeteccion en campos ciegos o bien en aquellos ya desarrollados que presentan anomalias termicas mayores fuera de las ya conocidas.

  11. Metal erosion-corrosion in multicomponent geothermal flows

    International Nuclear Information System (INIS)

    Paper describes the list of fracture mechanisms of geothermal power plant equipment metals. One specifies the key similarity parameters and mechanisms of physical and chemical processes of metal erosion-corrosion in multicomponent geothermal flows. Paper presents the results of the erosion-corrosion field tests at a geothermal power plant

  12. Stanford geothermal program. Final report, July 1990--June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report discusses the following: (1) improving models of vapor-dominated geothermal fields: the effects of adsorption; (2) adsorption characteristics of rocks from vapor-dominated geothermal reservoir at the Geysers, CA; (3) optimizing reinjection strategy at Palinpinon, Philippines based on chloride data; (4) optimization of water injection into vapor-dominated geothermal reservoirs; and (5) steam-water relative permeability.

  13. Near-surface groundwater responses to injection of geothermal wastes

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, S.C.

    1984-06-01

    This report assesses the feasibility of injection as an alternative for geothermal wastewater disposal and analyzes hydrologic controls governing the upward migration of injected fluids. Injection experiences at several geothermal developments are presented including the following: Raft River Valley, Salton Sea, East Mesa, Otake, Hatchobaru, and Ahuachapan geothermal fields.

  14. Thermal-Economic Modularization of Small, Organic Rankine Cycle Power Plants for Mid-Enthalpy Geothermal Fields

    Directory of Open Access Journals (Sweden)

    Yodha Y. Nusiaputra

    2014-07-01

    Full Text Available The costs of the surface infrastructure in mid-enthalpy geothermal power systems, especially in remote areas, could be reduced by using small, modular Organic Rankine Cycle (ORC power plants. Thermal-economic criteria have been devised to standardize ORC plant dimensions for such applications. We designed a modular ORC to utilize various wellhead temperatures (120–170 °C, mass flow rates and ambient temperatures (−10–40 °C. A control strategy was developed using steady-state optimization, in order to maximize net power production at off-design conditions. Optimum component sizes were determined using specific investment cost (SIC minimization and mean cashflow (MCF maximization for three different climate scenarios. Minimizing SIC did not yield significant benefits, but MCF proved to be a much better optimization function.

  15. Geothermal tomorrow 2008

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    Contributors from the Geothermal Technologies Program and the geothermal community highlight the current status and activities of the Program and the development of the global resource of geothermal energy.

  16. Multi-colony calibrations of coral Ba/Ca with a contemporaneous in situ seawater barium record

    Science.gov (United States)

    LaVigne, Michèle; Grottoli, Andréa G.; Palardy, James E.; Sherrell, Robert M.

    2016-04-01

    The coral skeleton barium to calcium ratio (Ba/Cacoral), a proxy for seawater barium concentrations (BaSW), has been interpreted as a tracer of upwelling based on the characteristic "nutrient like" depth profile of BaSW. However, in some tropical regions, such as the Gulf of Panamá, substantial influence of terrestrial runoff inputs and differences between the vertical distribution of BaSW and that of the major nutrients (nitrate and phosphate) in the upper water column can complicate the interpretation of Ba/Cacoral as an upwelled nutrient proxy. In the Gulf of Panamá, contemporaneous Ba/Cacoral records from multiple colonies of Porites lobata, Pavona gigantea, and Pavona clavus corals record a nearly twofold change in surface water BaSW as a 20-70% increase in skeletal Ba/Ca with excellent correlation among Ba/Ca records from co-located colonies (r = 0.86-0.99). These results provide, for the first time, an absolute calibration of the coral Ba proxy with a contemporaneous BaSW record. Compiling the Ba/Cacoral records from three co-located colonies of each species into taxon-specific composite regressions reveals strong statistically significant correlations with the BaSW time-series record (p coefficient, as well as a demonstration of the application of the P. clavus calibration to a previously published Ba/Cacoral record, emphasize the necessity of using taxon-specific calibrations to reconstruct changes in BaSW with accuracy. These results support the application of Ba/Cacoral to reconstruct past changes in absolute BaSW concentrations, adding an important tool to the collection of geochemical proxies for reconstructing surface ocean biogeochemical processes in the past.

  17. Fifteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The Fifteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23--25, 1990. Major topics included: DOE's geothermal research and development program, well testing, field studies, geosciences, geysers, reinjection, tracers, geochemistry, and modeling.

  18. 2012 geothermal energy congress. Proceedings

    International Nuclear Information System (INIS)

    Within the Geothermal Energy Congress 2012 from 13th to 16th November 2012, in Karlsruhe (Federal Republic of Germany), the following lectures were held: (1) Comparison of different methods for the design of geothermal probes on the example of the thermal utilization of smouldering fires at heaps (Sylvia Kuerten); (2) Determination of the thermo-physical features of loose rocks (Johannes Stegner); (3) Tools for the planning and operation of district heating grids (Werner Seichter); (4) geo:build - System optimisation of the cooling mode of the ground-source heat and cooling supply (Franziska Bockelmann); (5) Successful and economic conception, planning and optimization of district heating grids (Werner Seichter); (6) Treacer / Heat transfer decoupling in a heterogeneous hydrothermal reservoir characterized by geological faults in the Upper Rhine Graben (I. Ghergut); (7) Determination of the porosity, thermal conductivity and particle size distribution in selected sections of the Meisenheim-1 drilling core (Saar-Nahe basin, Rheinland-Palatinate) under consideration of geothermally relevant formulation of questions (Gillian Inderwies); (8) Innovative technologies of exploration in the Jemez Geothermal project, New Mexico, USA (Michael Albrecht); (9) Geothermal energy, heat pump and TABS - optimization of planning, operational control and control (Franziska Bockelmann); (10) The impact of large-scale geothermal probes (storage probes) on the heat transfer and heat loss (Christopher Steins); (11) Numeric modelling of the permocarbon in the northern Upper Rhine Graben (L. Dohrer); (12) Engineering measurement solutions on quality assurance in the exploitation of geothermal fields (C. Lehr); (13) Evaluation and optimization of official buildings with the near-surface geothermal energy for heating and cooling (Franziska Bockelmann); (14) On-site filtration for a rapid and cost-effective quantification of the particle loading in the thermal water stream (Johannes Birner

  19. Federal Geothermal Research Program Update Fiscal Year 2004

    Energy Technology Data Exchange (ETDEWEB)

    2005-03-01

    The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. The Geothermal Technologies Program (GTP) works in partnership with industry to establish geothermal energy as an economically competitive contributor to the U.S. energy supply. Geothermal energy production, a $1.5 billion a year industry, generates electricity or provides heat for direct use applications. The technologies developed by the Geothermal Technologies Program will provide the Nation with new sources of electricity that are highly reliable and cost competitive and do not add to America's air pollution or the emission of greenhouse gases. Geothermal electricity generation is not subject to fuel price volatility and supply disruptions from changes in global energy markets. Geothermal energy systems use a domestic and renewable source of energy. The Geothermal Technologies Program develops innovative technologies to find, access, and use the Nation's geothermal resources. These efforts include emphasis on Enhanced Geothermal Systems (EGS) with continued R&D on geophysical and geochemical exploration technologies, improved drilling systems, and more efficient heat exchangers and condensers. The Geothermal Technologies Program is balanced between short-term goals of greater interest to industry, and long-term goals of importance to national energy interests. The program's research and development activities are expected to increase the number of new domestic geothermal fields, increase the success rate of geothermal well drilling, and reduce the costs of constructing and operating geothermal power plants. These improvements will increase the quantity of economically viable geothermal resources, leading in turn to an increased number of geothermal power facilities serving more energy demand. These new geothermal projects will take advantage of geothermal resources in locations where development is not currently

  20. Federal Geothermal Research Program Update - Fiscal Year 2004

    Energy Technology Data Exchange (ETDEWEB)

    Patrick Laney

    2005-03-01

    The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. The Geothermal Technologies Program (GTP) works in partnership with industry to establish geothermal energy as an economically competitive contributor to the U.S. energy supply. Geothermal energy production, a $1.5 billion a year industry, generates electricity or provides heat for direct use applications. The technologies developed by the Geothermal Technologies Program will provide the Nation with new sources of electricity that are highly reliable and cost competitive and do not add to America's air pollution or the emission of greenhouse gases. Geothermal electricity generation is not subject to fuel price volatility and supply disruptions from changes in global energy markets. Geothermal energy systems use a domestic and renewable source of energy. The Geothermal Technologies Program develops innovative technologies to find, access, and use the Nation's geothermal resources. These efforts include emphasis on Enhanced Geothermal Systems (EGS) with continued R&D on geophysical and geochemical exploration technologies, improved drilling systems, and more efficient heat exchangers and condensers. The Geothermal Technologies Program is balanced between short-term goals of greater interest to industry, and long-term goals of importance to national energy interests. The program's research and development activities are expected to increase the number of new domestic geothermal fields, increase the success rate of geothermal well drilling, and reduce the costs of constructing and operating geothermal power plants. These improvements will increase the quantity of economically viable geothermal resources, leading in turn to an increased number of geothermal power facilities serving more energy demand. These new geothermal projects will take advantage of geothermal resources in locations where development is not currently possible or

  1. Stochastic Estimates of the Permeability Field of the Soultz-sous-Forêts Geothermal Reservoir - Comparison of Bayesian Inversion, MC Geostatistics, and EnKF Assimilation

    Science.gov (United States)

    Kosack, Christian; Vogt, Christian; Rath, Volker; Marquart, Gabriele

    2010-05-01

    , permeability, and dispersivity which produces a nearly perfect fit to the measured tracer data. The models used for the inversion are simplified to the main geologic elements of the geothermal reservoir and consist of only 2 to 4 regions of constant properties. Optimal a-posteriori parameter estimates will be complemented by an analysis of parameter dependencies and uncertainties as a by-product of the nonlinear inversion. With both ensemble methods a cell-wise discrete spatial distribution of the permeability can be retrieved. For MC approach we produced a large number of system realizations with permeability distributions randomly picked from a bimodal histogram of the enhanced zone and the surrounding. The main fracture area is modelled by assuming a high permeability and an anisotropic correlation length. After forward simulation of the tracer experiment, the successful realizations are selected and further grouped to study principal features of the permeability distribution. Similar to the MC approach, the EnKF is based on a forward propagation of an ensemble of realizations. At successive instants in time, different kinds of data as tracer concentration, bottom hole pressure, and permeability in various drill holes are collected in one data vector and used to update (assimilate) the system variables to improve the match between observation and simulation leading to a convergence of the ensemble. We studied the performance and spatial resolution of the EnKF procedure for a 3D test model which is based on the borehole locations and tracer experiment of the Soultz geothermal reservoir. We used all available information to condition the pressure field and to estimate the permeability. Already after a few assimilation steps the ensemble average permeability shows coarse features of the expected permeability field. However, any estimates of smaller scale permeability variations turn out to be very sensitive to the (potentially unknown) correlation lengths.

  2. Seismicity rate changes in the Salton Sea Geothermal Field and the San Jacinto Fault Zone after the 2010 Mw 7.2 El Mayor-Cucapah earthquake

    Science.gov (United States)

    Meng, Xiaofeng; Peng, Zhigang

    2014-06-01

    Whether static or dynamic stress changes play the most important role in triggering earthquakes in the near field is still in debate. Here, we examine the seismicity rate changes in southern California following the 2010 Mw 7.2 El Mayor-Cucapah earthquake. We focus on the Salton Sea Geothermal Field (SSGF) and the San Jacinto Fault Zone (SJFZ) because of high-sensitivity continuous borehole recordings and ample background seismicity. A significant increase in seismic activity is found in both study regions immediately following the main shock. However, near the SSGF where the static Coulomb stress decreased, the seismicity rate dropped below the pre-main-shock rate after ˜1 month. In comparison, along the SJFZ with an increase in the static Coulomb stress, the seismicity rate remained higher than the background rate with several moderate-size earthquakes occurring in the subsequent months. While we cannot completely rule out other mechanisms, these observations are best consistent with a widespread increase in seismicity from dynamic stress changes immediately after the main shock, and longer term seismicity rate changes from static stress changes. Our observation, together with other recent studies, suggests that both static and dynamic stress changes are important in triggering near-field earthquakes, but their affected regions and timescales are different.

  3. Geoelectrical structure by electrical logs and Schlumberger sounding at the Akinomiya geothermal field, Akita Prefecture; Denki kenso oyobi Schlumberger ho ni yoru Akinomiya chinetsu chiiki no hiteiko kozo

    Energy Technology Data Exchange (ETDEWEB)

    Kajiwara, T.; Takemoto, S.

    1997-05-27

    Based on the electrical logging data of the existed well and Schlumberger sounding data obtained in 1974, a two-dimensional inversion analysis of the specific resistance profile was conducted at the Akinomiya geothermal field, Akita Prefecture. From the electrical logging data, relationships between the geology and the specific resistance were illustrated. The specific resistance values of basement rocks showed more than 100 ohm-m, which were higher than those of the other seams. Intrusive rocks and tuffs in the basement rocks showed locally low values less than 100 ohm-m. Younger volcanic rocks showed low values around 10 ohm-m. As a result of the two-dimensional inversion analysis, the basement rocks could be detected as high specific resistance layers. Accordingly, it was considered that the basement rocks in this field can be detected as high specific resistance layers by analyzing the results of field survey sufficiently. Low specific resistance zones were observed in the shallow depth, which corresponded to the fumarolic gases. There were some layers with remarkably varied specific resistance values, which were considered to be related with alteration. 6 refs., 3 figs.

  4. Prospects of geothermal resource exploitation

    International Nuclear Information System (INIS)

    The use of geothermal energy to generate electricity has only occurred during the past 50 years by drilling wells in aquifers close to magmas and producing either dry steam or hot water. The world's production of electricity from geothermal energy is over 6000 MWe and is still growing. The direct use of geothermal energy for major urban communities has been developed recently by exploitation of aquifers in sedimentary basins under large towns. Scaling up the extraction of heat implies the exploitation of larger and better located fields requiring an appropriate method of extraction; the objective of present attempts in USA, Japan and Europe is to create heat exchangers by the circulation of water between several deep wells. Two field categories are considered: the extension of classical geothermal fields beyond the aquifer areas, and areas favoured by both a high geothermal gradient, fractures inducing a natural permeability at large scale, and good commercial prospects (such as in the Rhenan Graben). Hot dry rocks concept has gained a large interest. 1 fig., 5 tabs., 11 refs

  5. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20110367 Cheng Jian(College of Energy Resources,Chengdu University of Technology,Chengdu 610059,China);Wang Duoyi Research on the Wenchuan Earthquake "Endpoint Effect":On the Geothermal Anomaly in Longquanyi,Chengdu,Sichuan Province,China(Journal of Chengdu University of Technology,ISSN1671-9727,CN51-1634/N,37(2),2010,p.155-159,4 illus.,15 refs.)Key words:seismic effects,thermal

  6. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>20102475 Chen Shiliang(No.4 Geological Party of Fujian Province,Ningde 352100,China)A Brief Analysis on Geothermy in the Nantai Isle of Fuzhou Municipality,Fujian Province(Geology of Fujian,ISSN1001-3970,CN35-1080/P,28(4),2009,p.310-314,1 illus.,1 table,3 refs.)Key words:geothermal exploration,Fujian ProvinceBased on the geochemistry and geophysical

  7. MT2-D inversion analysis in Kakkonda geothermal field; Kakkonda chinetsu chiiki ni okeru MT ho nijigen kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Yamane, K.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Miyazaki, S. [Japan Metals and Chemicals Co. Ltd., Tokyo (Japan); Uchida, T. [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

    1996-05-01

    Data, collected from an MT method-assisted survey conducted in the Kakkonda geothermal region in 1987, was re-examined, and a new structure was found. The review was carried out by use of a 2D analysis in the TM mode. According to the 1D analysis of 1987 and the geological data gathered then, it is estimated that the resistivity structure of this region runs in the northwest-southeast direction. A northeast-southwest traverse line was set for this analysis, orthogonal to the strike, and the impedance at each observation spot was caused to rotate to this direction across the whole range of frequency. Furthermore, in 1994-95, surveys were conducted using arrayed CSMT/MT methods. All these sum up to indicate that a high-resistivity region extends northwest in the southwestern part of the Kakkonda river but that there exists a low-resistivity region of several 10 Ohm m centering about the B traverse line. The high-resistivity region deep in the ground being the target of excavation in the Kakkonda region, to collect knowledge about this high-resistivity is important, and here the effectiveness of the 2d analysis has been verified. 5 refs., 11 figs.

  8. City of El Centro geothermal energy utility core field experiment. Final report, February 16, 1979-November 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    Province, S.G.; Sherwood, P.B.

    1984-11-01

    The City of El Centro was awarded a contract in late 1978 to cost share the development of a low to moderate temperature geothermal resource in the City. The resource would be utilized to heat, cool and provide hot water to the nearby Community Center. In December 1981, Thermal 1 (injector) was drilled to 3970 feet. In January 1982, Thermal 2 (producer) was drilled to 8510 feet. Before testing began, fill migrated into both wells. Both wells were cleaned out. A pump was installed in the producer, but migration of fill again into the injector precluded injection of produced fluid. A short term production test was undertaken and results analyzed. Based upon the analysis, DOE decided that the well was not useful for commercial production due to a low flow rate, the potential problems of continued sanding and gasing, and the requirement to lower the pump setting depth and the associated costs of pumping. There was no commercial user found to take over the wells. Therefore, the wells were plugged and abandoned. The site was restored to its original condition.

  9. Application of tritium and hydrofluorocarbons as geothermal vapor-phase tracers in geothermal reservoir management

    International Nuclear Information System (INIS)

    The International Atomic Energy Agency (IAEA) included PNOC-EDC along with other member states (i.e. Vietnam, Indonesia, Malaysia, Colombia, etc.) in its Coordinated Research Program to conduct researches on Validation of Tracers and Software for Inter-well Investigation (RC 13130/R0). The Philippines, through PNOC-EDC, focused on the 'Application of Tritium and Hydrofluorocarbon as Vapor-Phase Tracers in Geothermal Reservoir Management'. The first phase of the project focused on tritium application, while the second phase focused on hydrofluorocarbon testing. The tritium phase was applied in Leyte Geothermal Production Field; while testing of hydrofluorocarbon was done in two stages. R-22 was injected and monitored in Mindanao Geothermal Production Field and R-134a will be tested in Southern Negros Geothermal Production Field. Tracers that have been tested in PNOC-EDC operating steamfields, so far, include naphthalene disulfonate (NDS), sodium fluorescein, Iodine-125, and Iodine-131. The most utilized is naphthalene disulfonate (NDS), mainly because of its detectability at low levels (300 deg. C) (Rose et al., 2002) in a water-dominated reservoir. NDS, however, becomes inapplicable in a vapor-dominated reservoir, as some of PNOC-EDC's geothermal production fields are now developing into. Tongonan and majority of South Sambaloran and Upper Mahiao sectors of the Leyte Geothermal Production Field (LGPF); Sandawa of Mindanao Geothermal Production Field (MGPF) and Balas-balas of Southern Negros Geothermal Production Field (SNGPF) are gradually being transformed into a highly two-phase reservoir. In order to trace fluid movement in a highly two-phase environment, the need to develop vapor tracers applicable in medium- to high-temperature geothermal systems, as some EDC fields are turning into, is recognized and is becoming a critical aspect in geothermal reservoir management. The CRP came in at the appropriate time since testing of a vapour tracer suitable to the

  10. Seawater nutrient and carbonate ion concentrations recorded as P/Ca, Ba/Ca, and U/Ca in the deep-sea coral D. dianthus

    OpenAIRE

    Anagnostou, Eleni; Sherrell, Robert M; Gagnon, Alex; LaVigne, Michele; Field, M Paul; William F. McDonough

    2011-01-01

    As paleoceanographic archives, deep sea coral skeletons offer the potential for high temporal resolution and precise absolute dating, but have not been fully investigated for geochemical reconstructions of past ocean conditions. Here we assess the utility of skeletal P/Ca, Ba/Ca and U/Ca in the deep sea coral D. dianthus as proxies of dissolved phosphate (remineralized at shallow depths), dissolved barium (trace element with silicate-type distribution) and carbonate ion concentrations, respec...

  11. Prediction and prevention of silica scaling at low levels of oversaturation: Case studies, and calculations for Uenotai Geothermal Field, Akita Prefecture, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Christopher W.; Iwata, Shun; Takeuchi, Rituo; Naka, Tohsaku

    1991-01-01

    Production system design studies often include site-specific silica scaling field experiments, conducted because the onset and rate of scaling are believed difficult to predict, particularly at relatively low levels of oversaturation such as may exist in separators, flowlines, and injection wells. However, observed scaling occurrences (Cerro Prieto, Dixie Valley, Svartsengi, Otake, Hatchobaru, Milos, experimental work) actually conform fairly well to existing theory and rate equations. It should be possible to predict low level scaling with sufficient confidence for production and injection system design and, in cases where oversaturation is allowed, to design systems with foresight to suppress or manage the scale which develops. A promising suppression technology is fluid pH reduction by mixing with non-condensible gases and/or condensate. Calculations for injection lines at Uenotai geothermal field indicate molecular deposition at rates of 0.1 to 1 mm/yr, and some potential for particle deposition at points of turbulence, which can be suppressed by an order of magnitude with about 500 ppm CO{sub 2}. Further improvements of predictive technique will benefit from more uniformity in designing experiments, reporting results, and reporting measurements of scaling in actual production systems.

  12. Coral Ba/Ca records of sediment input to the fringing reef of the southshore of Moloka'i, Hawai'i over the last several decades

    Science.gov (United States)

    Prouty, N.G.; Field, M.E.; Stock, J.D.; Jupiter, S.D.; McCulloch, M.

    2010-01-01

    The fringing reef of southern Moloka’i is perceived to be in decline because of land-based pollution. In the absence of historical records of sediment pollution, ratios of coral Ba/Ca were used to test the hypothesis that sedimentation has increased over time. Baseline Ba/Ca ratios co-vary with the abundance of red, terrigenous sediment visible in recent imagery. The highest values at One Ali’i are near one of the muddiest parts of the reef. This co-varies with the lowest growth rate of all the sites, perhaps because the upstream Kawela watershed was historically leveed all the way to the nearshore, providing a fast-path for sediment delivery. Sites adjacent to small, steep watersheds have ∼decadal periodicities whereas sites adjacent to mangrove forests have shorter-period fluctuations that correspond to the periodicity of sediment transport in the nearshore, rather than the watershed. All four sites show a statistically significant upward trend in Ba/Ca.

  13. Alaska geothermal bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Liss, S.A.; Motyka, R.J.; Nye, C.J. (comps.)

    1987-05-01

    The Alaska geothermal bibliography lists all publications, through 1986, that discuss any facet of geothermal energy in Alaska. In addition, selected publications about geology, geophysics, hydrology, volcanology, etc., which discuss areas where geothermal resources are located are included, though the geothermal resource itself may not be mentioned. The bibliography contains 748 entries.

  14. Operation and Performance of a Biphase Turbine Power Plant at the Cerro Prieto Geothermal Field (Final Report)

    Energy Technology Data Exchange (ETDEWEB)

    Hays, Lance G. [Douglas Energy Company, Placentia, CA (United States)

    2000-09-01

    A full scale, wellhead Biphase turbine was manufactured and installed with the balance of plant at Well 103 of the Cerro Prieto geothermal resource in Baja, California. The Biphase turbine was first synchronized with the electrical grid of Comision Federal de Electricidad on August 20, 1997. The Biphase power plant was operated from that time until May 23, 2000, a period of 2 years and 9 months. A total of 77,549 kWh were delivered to the grid. The power plant was subsequently placed in a standby condition pending replacement of the rotor with a newly designed, higher power rotor and replacement of the bearings and seals. The maximum measured power output of the Biphase turbine, 808 kWe at 640 psig wellhead pressure, agreed closely with the predicted output, 840 kWe. When combined with the backpressure steam turbine the total output power from that flow would be increased by 40% above the power derived only from the flow by the present flash steam plant. The design relations used to predict performance and design the turbine were verified by these tests. The performance and durability of the Biphase turbine support the conclusion of the Economics and Application Report previously published, (Appendix A). The newly designed rotor (the Dual Pressure Rotor) was analyzed for the above power condition. The Dual Pressure Rotor would increase the power output to 2064 kWe by incorporating two pressure letdown stages in the Biphase rotor, eliminating the requirement for a backpressure steam turbine. The power plant availability was low due to deposition of solids from the well on the Biphase rotor and balance of plant problems. A great deal of plant down time resulted from the requirement to develop methods to handle the solids and from testing the apparatus in the Biphase turbine. Finally an online, washing method using the high pressure two-phase flow was developed which completely eliminated the solids problem. The availability of the Biphase turbine itself was 100

  15. Shallow gas and temperature survey at San Jacinto-Tizate geothermal field, Nicaragua; Levantamiento de gases del subsuelo y temperaturas superficiales en el campo geotermico San Jacinto-Tizate, Nicaragua

    Energy Technology Data Exchange (ETDEWEB)

    Ostapenko, Sergio [INTERGEOTERM S. A., Managua (Nicaragua); Romero Chavez, Francisco [Centro de Investigaciones Geocientificas (CIGEO), UNAN-MANAGUA, Managua (Nicaragua)

    1995-09-01

    The geothermal reservoirs generally indicate themselves on the surface not only by thermal manifestations (fumaroles, hot springs) but also by anomalies of soil gases and subsurface temperature. Soil gas CO{sub 2} and temperature surveys were conducted at the San Jacinto-Tizate geothermal field in Nicaragua. They helped to understand better the location site of the geothermal reservoir and, together with other exploration methods, to choose the best position for the wells. The results of the drilling showed that all the wells situated inside the common anomalies of soil gas (CO{sub 2}) and temperature, encountered a high temperature geothermal reservoir. [Espanol] Los yacimientos geotermicos de altas temperaturas, ademas de manifestarse en la superficie a traves de focos visibles naturales de descarga, lo hacen en forma de anomalias de valores altos de concentracion de CO{sub 2}, y de temperaturas superficiales. La realizacion del levantamiento termico y de CO{sub 2} en el campo geotermico San Jacinto-Tizate, Nicaragua permitio definir: Los sitios de descarga no visibles del sistema geotermico; Precisar la distribucion espacial del yacimiento geotermico y Recomendar, en combinacion con otros metodos de exploracion, sitios para la perforacion de pozos geotermicos. Los resultados de las perforaciones demostraron que todos los pozos ubicados dentro de los limites de las anomalias de CO{sub 2} y temperatura, intersecaron el yacimiento permeable con aguas subterraneas de altas temperaturas.

  16. Spatial analysis of noise emission at the Los Azufres geothermal field, Mich.; Analisis espacial de emision de ruido en el campo geotermico de Los Azufres, Mich.

    Energy Technology Data Exchange (ETDEWEB)

    Camarena Magana, Emilio; Ordaz Mendez, Christian A. [Comision Federal de Electricidad, Residencia de Los Azufres, Morelia, Michoacan (Mexico)]. E-mail: emilio.camarena@cfe.gob.mx

    2010-01-15

    To verify noise emissions from the usual activities in an operating geothermal field, noise measurements were carried out in a 4.2 km{sup 2} area in the southern zone of the Los Azufres, Mich., geothermal field. There are seven production wells operating here and three abandoned wells. The average noise emission in the southern zone was 36.5 decibels (dB), regarded as the natural reading of environmental-noise emission. In the Christmas (valves) tree for operating production wells, the noise ranges from 70.9 to 91.7 dB, while in open discharging valves for steam-pipes, the noise can reach 118 dB. In Mexico the maximum permissible limit of noise on the periphery of a property is 68 dB in daytime and 65 dB at night. Based on measurements made at the periphery of lots where the geothermal wells are located, four out of seven production wells measured do not exceed the maximum allowable level, while the other three seem to exceed it. However no definite limits exist for the lots. It is recommended that the measurement points as indicated by the official standard in environmental matters be re-established, which will enable noise emissions by several wells that have exceeded the permissible limit, to actually fall within it. [Spanish] Se realizaron mediciones sonicas en un area de 4.2 km{sup 2} localizada en la zona sur del campo geotermico de Los Azufres, Mich., a fin de verificar la emision de ruido asociada a las actividades usuales en un campo geotermico en operacion. En esta area se encuentran siete pozos productores en operacion y tres pozos abandonados. La emision promedio de ruido en estos ultimos fue de 36.5 decibeles (dB), considerandose como la condicion natural de emision de ruido ambiental. En el arbol de valvulas de los pozos productores en operacion el ruido va de los 70.9 a los 91.7 dB, mientras que en valvulas abiertas de descarga de vaporductos la emision puede llegar hasta los 118 dB. En Mexico el limite maximo permisible de ruido en la periferia de

  17. Geochemical evidences of the boiling phenomena in Los Humeros geothermal field; Evidencias geoquimicas del fenomeno de ebullicion en el campo de Los Humeros

    Energy Technology Data Exchange (ETDEWEB)

    Munguia Bracamontes, Fernando; Lopez Mendiola, Juan Manuel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    The geochemical behavior of the fluids in the geothermal field Los Humeros suggests the existence of a reservoir of relatively low permeability, with hydrostatic pressure gradients and thermodynamic conditions of pressure-temperature close to the boiling point in stationary conditions, that is, non-disturbed. Nevertheless, the fluid geochemistry also indicates the presence of steam under stationary conditions, mainly in the fault, fracture, fissure, etc. zones. The steam diminishes progressively as the extraction time increases, being replaced by boiling fluid. [Espanol] El comportamiento geoquimico de los fluidos en el campo geotermico de Los Humeros sugiere la existencia de un yacimiento de relativa baja permeabilidad, con gradientes de presion hidrostatica y condiciones termodinamicas de presion-temperatura cercanas al punto de ebullicion a condiciones estables; es decir, no perturbadas. Sin embargo, la geoquimica de los fluidos tambien indica la existencia de vapor bajo condiciones estables, principalmente en las zonas de fallas, fracturas, fisuras, etc. El vapor disminuye progresivamente conforme aumenta el tiempo de extraccion, siendo reemplazado por fluido en ebullicion.

  18. An Assessment of Changes in Kunzea ericoides var . microflora and Other Hydrothermal Vegetation at the Wairakei-Tauhara Geothermal Field, New Zealand

    Science.gov (United States)

    van Manen, Saskia M.; Reeves, Robert

    2012-10-01

    Hydrothermal ecosystems are of high conservation and scientific value, but they are sensitive to external perturbations that result from development. This study examines the composition of vegetation at four plots at the Wairakei-Tauhara geothermal field, New Zealand, using the Scott height-frequency method, ground temperatures at 0.1- and 1-m depth, soil pH, and photographic surveys. It highlights the response of plant communities, in particular that of Kunzea ericoides var. microflora, in terms of composition, structure, and biomass index values, measures changes in ground temperature, as well as provides baseline data against which to compare future changes. It was found that optimal growing conditions for K. ericoides var. microflora are at temperatures above background conditions with a slightly acidic pH. Plots with cooler, less acidic conditions support more diverse plant communities, which also promote the establishment of invasive species. This suggests that the largest threats to thermotolerant vegetation in New Zealand, including K. ericoides var. microflora, are further decreases in ground temperature because the establishment of invasive species may result in thermolerant vegetation being out-competed in hydrothermal ecosystems. Recognising and understanding the ecological diversity and dynamics of hydrothermal ecosystems, as well as acknowledging the competing interests between development and conservation, is key to the management and protection of these areas.

  19. Environmental framework for the development of the Los Humeros, Puebla geothermal field; Contexto ambiental del desarrollo del campo geotermico de Los Humeros, Puebla

    Energy Technology Data Exchange (ETDEWEB)

    Pastrana Melchor, Eugenio J.; Fernandez Solorzano, Maria Elena; Mendoza Rangel, Ernesto; Hernandez Ayala, Cuauhtemoc [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

    2005-06-01

    The construction, operation and maintenance of the Los Humeros, Puebla, geothermal field were undertaken in accordance with Mexican environmental regulations. The resolutions on environmental impacts, license for atmospheric pollution prevention, concession title for exploitation and use of national waters, permission for wastewater discharging services, company registration for producing dangerous wastes and fulfillment of all conditions noted in the documents show the applicable environmental laws for the project have been followed. [Spanish] La construccion, operacion y mantenimiento del campo geotermoelectrico Los Humeros, Puebla, se ha llevado a cabo dentro del marco juridico ambiental vigente en Mexico. Las resoluciones en materia de impacto ambiental, la licencia en materia de prevencion de la contaminacion de la atmosfera, el titulo de concesion para explorar, usar o aprovechar aguas nacionales, el permiso para descargar aguas residuales domesticas, el registro como empresa generadora de residuos peligrosos, y el cumplimiento de las disposiciones y condicionantes establecidos en cada uno de estos documentos, evidencian la observancia de la legislacion ambiental aplicable al proyecto.

  20. Borehole geology and sub-surface petrochemistry of the Domes area, Olkaria geothermal field, Kenya, in relation to well OW-922.

    OpenAIRE

    Otieno, Victor Omondi, 1985-

    2016-01-01

    Olkaria is a high temperature geothermal system located within the central sector of the Kenya Rift System, and associated with a region of Quaternary volcanism. Recharge into the system is exclusively by meteoric water, derived primarily from the high-altitude rift escarpments. Tectonic structures play without a doubt a pivotal role in enhancing fluid flow within the geothermal system. For this study, data and samples from four wells, OW-905A, OW-910, OW-917 and OW-922, have been used. Wells...

  1. Multidimensional reactive transport modeling of CO2 mineral sequestration in basalts at the Hellisheidi geothermal field, Iceland.

    OpenAIRE

    Edda S.P. Aradóttir, Eric L. Sonnenthal, Grímur Björnsson and Hannes Jónsson

    2012-01-01

    Two and three-dimensional field scale reservoir models of CO2 mineral sequestration in basalts were developed and calibrated against a large set of field data. Resulting principal hydrological properties are lateral and vertical intrinsic permeabilities of 300 and 1700 × 10−15m2, respectively, effective matrix porosity of 8.5% and a 25 m/year estimate for regional groundwater flow velocity. Reactive chemistry was coupled to calibrated models and predictive ...

  2. 3D Numerical Simulation of the Geothermal Field of Permafrost at Salluit in Nunavik, Québec, in Response to Climate Warming. Research in Progress.

    Science.gov (United States)

    Fortier, R.; Allard, M.; Gagnon, O.

    2002-12-01

    survey aims at providing information on the geological and geotechnical characteristics of permafrost. Thermistor cables in deep boreholes, meteorological stations, dataloggers for the measurement of surface temperature, and thermal probes have been also installed in the valley. Air photographs will be used to produce a digital terrain model of the valley. This integrated multi-technique approach is essential for properly assessing the permafrost conditions in the valley. The study will provide the data needed for the development of a 3D model of permafrost conditions in the valley. A 3D numerical simulation of the geothermal field of permafrost in the valley will be then undertaken. This simulation is a major challenge giving the size of the thermal field and the variability in permafrost conditions. The impacts of climate warming on the thermal field of permafrost will be simulated and predicted by forcing the surface temperature to increase following different scenarios of climate warming. It is planned to combine the geotechnical properties and the simulation of the geothermal field of permafrost in order to define threshold values of permafrost strength and slope instability and set a pre-warning scheme of permafrost temperature in case of further warming in the coming years. The monitoring of permafrost temperature will be continued in the future. If the scheme is reached, actions can be then undertaken to mitigate the impacts of climate warming on the infrastructures and protect the population of Salluit.

  3. Geothermal pilot study final report: creating an international geothermal energy community

    Energy Technology Data Exchange (ETDEWEB)

    Bresee, J.C.; Yen, W.W.S.; Metzler, J.E. (eds.)

    1978-06-01

    The Geothermal Pilot Study under the auspices of the Committee on the Challenges of Modern Society (CCMS) was established in 1973 to apply an action-oriented approach to international geothermal research and development, taking advantage of the established channels of governmental communication provided by the North Atlantic Treaty Organization (NATO). The Pilot Study was composed of five substudies. They included: computer-based information systems; direct application of geothermal energy; reservoir assessment; small geothermal power plants; and hot dry rock concepts. The most significant overall result of the CCMS Geothermal Pilot Study, which is now complete, is the establishment of an identifiable community of geothermal experts in a dozen or more countries active in development programs. Specific accomplishments include the creation of an international computer file of technical information on geothermal wells and fields, the development of studies and reports on direct applications, geothermal fluid injection and small power plants, and the operation of the visiting scientist program. In the United States, the computer file has aready proven useful in the development of reservoir models and of chemical geothermometers. The state-of-the-art report on direct uses of geothermal energy is proving to be a valuable resource document for laypersons and experts in an area of increasing interest to many countries. Geothermal fluid injection studies in El Salvador, New Zealand, and the United States have been assisted by the Reservoir Assessment Substudy and have led to long-range reservoir engineering studies in Mexico. At least seven small geothermal power plants are in use or have been planned for construction around the world since the Small Power Plant Substudy was instituted--at least partial credit for this increased application can be assigned to the CCMS Geothermal Pilot Study. (JGB)

  4. Sign of Radon for locate geothermic sources

    International Nuclear Information System (INIS)

    Evaluation of a geothermic field is based upon geological, geophysical and geochemical studies that enable the evaluation of the deposit potential, that is to say, the amount of energy per unit mass, the volume of the trapped fluid, vapor fraction and fluid chemistry. This thesis has as its objective the evaluation of radon gas emanation in high potential geothermic zones in order to utilize the results as a low cost and easy to manage complimentary tool in geothermic source prospection. In chapter I the importance and evaluation of a geothermic deposit is discussed. In chapter II the general characteristics of radon are discussed: its radioactivity and behavior upon diffusion over the earth's surface> Chapter III establishes the approach used in the geothermic field of Los Azufres, Michoacan, to carry out samplings of radon and the laboratory techniques that were used to evaluate the concentration of radon in the subsoil. Finally in chapter IV measurements of radon in the field are compared to geological faults in the area under study. The sampling zones were: low geothermic potential zone of the northern and the southern zone having a greater geothermic potential than that in the north. The study was carried out at different sampling times using plastics detectors of from 30 to 46 days from February to July. From the results obtained we concluded that the emission of radon was greater in the zones of greatest geothermic potential than in the low geothermic potential zones it was also affected by the fault structure and the time of year in which sampling was done. (Author)

  5. Hot Dry Rock; Geothermal Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-01-01

    The commercial utilization of geothermal energy forms the basis of the largest renewable energy industry in the world. More than 5000 Mw of electrical power are currently in production from approximately 210 plants and 10 000 Mw thermal are used in direct use processes. The majority of these systems are located in the well defined geothermal generally associated with crustal plate boundaries or hot spots. The essential requirements of high subsurface temperature with huge volumes of exploitable fluids, coupled to environmental and market factors, limit the choice of suitable sites significantly. The Hot Dry Rock (HDR) concept at any depth originally offered a dream of unlimited expansion for the geothermal industry by relaxing the location constraints by drilling deep enough to reach adequate temperatures. Now, after 20 years intensive work by international teams and expenditures of more than $250 million, it is vital to review the position of HDR in relation to the established geothermal industry. The HDR resource is merely a body of rock at elevated temperatures with insufficient fluids in place to enable the heat to be extracted without the need for injection wells. All of the major field experiments in HDR have shown that the natural fracture systems form the heat transfer surfaces and that it is these fractures that must be for geothermal systems producing from naturally fractured formations provide a basis for directing the forthcoming but, equally, they require accepting significant location constraints on HDR for the time being. This paper presents a model HDR system designed for commercial operations in the UK and uses production data from hydrothermal systems in Japan and the USA to demonstrate the reservoir performance requirements for viable operations. It is shown that these characteristics are not likely to be achieved in host rocks without stimulation processes. However, the long term goal of artificial geothermal systems developed by systematic

  6. South Dakota geothermal handbook

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The sources of geothermal fluids in South Dakota are described and some of the problems that exist in utilization and materials selection are described. Methods of heat extraction and the environmental concerns that accompany geothermal fluid development are briefly described. Governmental rules, regulations and legislation are explained. The time and steps necessary to bring about the development of the geothermal resource are explained in detail. Some of the federal incentives that encourage the use of geothermal energy are summarized. (MHR)

  7. Comparison of Ba/Ca and δOWATER18 as freshwater proxies: A multi-species core-top study on planktonic foraminifera from the vicinity of the Orinoco River mouth

    Science.gov (United States)

    Bahr, André; Schönfeld, Joachim; Hoffmann, Julia; Voigt, Silke; Aurahs, Ralf; Kucera, Michal; Flögel, Sascha; Jentzen, Anna; Gerdes, Axel

    2013-12-01

    Past river run-off is an important measure for the continental hydrological cycle and the assessment of freshwater input into the ocean. However, paleosalinity reconstructions applying different proxies in parallel often show offsets between the respective methods. Here, we compare the established foraminiferal Ba/Ca and δOWATER18 salinity proxies for their capability to record the highly seasonal Orinoco freshwater plume in the eastern Caribbean. For this purpose we obtained a data set comprising Ba/Ca and δOWATER18 determined on multiple species of planktonic foraminifera from core tops distributed around the Orinoco River mouth. Our findings indicate that interpretations based on either proxy could lead to different conclusions. In particular, Ba/Ca and δOWATER18 diverge in their spatial distribution due to different governing factors. Apparently, the Orinoco freshwater plume is best tracked by Ba/Ca ratios of G. ruber (pink and sensu lato morphotypes), while δOWATER18 based on the same species is more related to the local precipitation-evaporation balance overprinting the riverine freshwater contribution. Other shallow dwelling species (G. sacculifer, O. universa) show a muted response to the freshwater discharge, most likely due to their ecological and habitat preferences. Extremely high Ba/Ca ratios recorded by G. ruber are attributed to Ba2+-desorption from suspended matter derived from the Orinoco. Samples taken most proximal to the freshwater source do not show pronounced Ba/Ca or δOWATER18 anomalies. Here, the suspension loaded freshwater lid developing during maximum discharge suppresses foraminiferal populations. Both proxies are therefore biased towards dry season conditions at these sites, when surface salinity is only minimally reduced.

  8. Preliminary petrological and geochemical results from the Salton Sea Geothermal Field, California: A near-field natural analog of a radioactive waste repository in salt: Topical report No. 2

    International Nuclear Information System (INIS)

    High concentrations of radionuclides and high temperatures are not naturally encountered in salt beds. For this reason, the Salton Sea Geothermal Field (SSGF) may be the best available geologic analog of some of the processes expected to occur in high level nuclear waste repositories in salt. Subsurface temperatures and brine concentrations in the SSGF span most of the temperature range and fluid inclusion brine range expected in a salt repository, and the clay-rich sedimentary rocks are similar to those which host bedded or domal salts. As many of the chemical processes observed in the SSGF are similar to those expected to occur in or near a salt repository, data derived from it can be used in the validation of geochemical models of the near-field of a repository in salt. This report describes preliminary data on petrology and geochemistry, emphasizing the distribution of rare earth elements and U and Th, of cores and cuttings from several deep wells chosen to span a range of temperature gradients and salinities. Subsurface temperature logs have been augmented by fluid inclusion studies, to reveal the effects of brines of varying temperature and salinity. The presence of brines with different oxygen isotopic signatures also indicate lack of mixing. Whole rock major, minor and trace element analyses and data on brine compositions are being used to study chemical migration in these sediments. 65 refs., 20 figs., 3 tabs

  9. Geothermal power engineering abroad

    International Nuclear Information System (INIS)

    The history, status and development prospects of geothermal power engineering in different countries are discussed. The role of geothermal electric power plants in energy balance of most of countries is not large nowadays. It is supposed that the total power of the World geothermal plants will achieve 17600 MW till 2000

  10. Isotopic Evolution of Wells in the Geothermal Field of Los Azufres, Michoacan, Mexico; Evolucion isotopica de fluidos de pozos del campo geotermico de Los Azufres, Michoacan, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Barragan Reyes, Rosa Maria; Portugal Marin, Enrique; Arellano Gomez, Victor Manel; Aragon Aguilar, Alfonso [Instituto de Investigaciones Electricas (Mexico); Sandoval Medina, Fernando [Comision Federal de Electricidad (Mexico)

    2002-12-01

    Isotopic ({delta}{sup 1}8 O and {delta}D) data from production and reinjection web fluids from the Los Azufres geothermal field were interpreted in order to define reservoir evolution and the occurrence of physical processes as a result of exploitation. The study included data of 30 wells, which were sampled in September, 2000. General results indicate that different phenomena seem to occur in both zones of the field. In the southern zone there are two different trends of behavior: a mixture of fluids evidenced by the {delta}D versus {delta}{sup 1}8 O trend with a positive slope, was interpreted as the result of reservoir vapor separation at a temperature above 220 Celsius degrees, since for temperatures above 220 Celsius degrees deuterium behaves as a volatile component. No well-defined {delta}{sup D} vs {delta}{sup 1}8 O trend was found for the northern zone, but some points seem to fit the same negative slope trend found in the souther zone. The study of reservoir temperatures estimated by different approaches for particular wells through time, as well as temperature results obtained with a heat and flow well simulator, suggest that reservoir boiling occurs in localized areas in both zone of the field. This process is probably due to exploitation. [Spanish] Se interpretaron datos isotopicos ({delta}{sup 1}8 O y {delta}D) de fluidos de pozos productores y de reinyeccion del campo geotermico de Los Azufres, Michoacan, Mexico, para definir la evolucion del yacimiento y la ocurrencia de procesos fisicos como resultado de la explotacion. En el estudio se consideran datos de treinta pozos segun el muestreo realizado en septiembre de 2000. El estudio de la evolucion en el tiempo de las estimaciones de temperatura de yacimiento mediante diferentes tecnicas, asi como la temperatura obtenida de simulacion de pozos, sugiere que ocurre ebullicion en areas localizadas en ambas zonas del campo debido a la explotacion. Los resultados generales indican la existencia de

  11. An application of neural network in geophysical prospecting. Electrical resistivity at Las Virgenes geothermal field, Baja California Sur, Mexico; Una aplicacion de las redes neuronales a la prospeccion geofisica. Resistividad electrica en las Tres Virgenes, Baja California Sur, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Palma Guzman, Sergio Hugo [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

    2000-12-01

    The technology of the neural network is presented with geophysical focus in the Las Virgenes geothermal field, Baja California Sur, Mexico. The results obtained when extrapolating the associative data of the prospecting magnetoteluria and Vertical Electric Sounding, on the area of the geothermal wells to the rest of the area, allows to classify zones of interest for the geothermal exploitation. Also, the use of these associative parameters with the information of the stabilized temperature of the wells, they allow to predict temperatures for the rest of the area. [Spanish] Se presenta una aplicacion de la tecnologia de las redes neuronales con enfoque geofisico en el campo geotermico de Las Virgenes, Baja California Sur, Mexico. Los resultados obtenidos al extrapolar los datos asociativos de las prospecciones geoelectricas de magnetoteluria y sondeos electricos verticales, en la zona de los pozos geotermicos al resto del area, permiten clasificar zonas de interes para la explotacion geotermica. Tambien, la utilizacion de estos parametros asociativos con la informacion de la temperatura estabilizada de los pozos, permiten predecir temperaturas para la misma area.

  12. Multi-Centennial Record of North Atlantic Freshwater Variability since the Little Ice Age Archived in Coralline Algal Ba/Ca

    Science.gov (United States)

    Chan, P. T. W.; Halfar, J.; Adey, W.; Zack, T.

    2014-12-01

    Declining Arctic sea-ice cover in recent decades has driven large-scale freshwater transport into the North Atlantic, possibly influencing the strength of the Meridional Overturning Circulation and even global climate. However, due to the lack of long-term oceanographic observations, little is known about the natural freshwater variability of the Northwestern Atlantic. Crustose coralline algae Clathromorphum compactum are extremely long-lived shallow marine calcareous plants that are abundant along the subarctic eastern Canadian coastline. They are particularly well-suited as recorders of paleoclimate signals due to the formation of annual growth increments, allowing for the precise calendar dating and geochemical sampling of hard tissue. Here, we provide the first annually-resolved multi-centennial record of coralline algal Ba/Ca from Labrador, Canada, as a proxy for North Atlantic freshwater variability extending well into the Little Ice Age (LIA) (1665 AD). Barium-to-calcium ratios (Ba/Ca) from coralline algae have previously been used as an indicator of freshwater runoff. This is because barium-rich clay sediments are transported by terrestrial runoff into coastal waters, and barium is released from the clay minerals upon encountering more alkaline elements present in seawater. We observe higher algal barium concentrations during the LIA, followed by a steady decline to recent times. In addition, coralline algal Ba/Ca shows significant positive relationships to Hudson Strait runoff, as well as Canadian Arctic and North Atlantic sea-ice extent. This suggests that more riverine Ba is transported from the Hudson Strait into the Labrador Sea during periods of increased sea-ice cover. Multiyear sea-ice can block incoming solar radiation thereby diminishing the effects of nutrient scavenging by phytoplankton, resulting in a more conservative transport of Ba into northern Labrador. However as sea-ice continues to thin, more sunlight is able to penetrate through the

  13. Structural control on geothermal circulation in the Tocomar geothermal volcanic area (Puna plateau, Argentina)

    Science.gov (United States)

    Giordano, Guido

    2016-04-01

    The reconstruction of the stratigraphical-structural framework and the hydrogeology of geothermal areas is fundamental for understanding the relationships between cap rocks, reservoir and circulation of geothermal fluids and for planning the exploitation of the field. The Tocomar geothermal volcanic area (Puna plateau, Central Andes, NW Argentina) has a high geothermal potential. It is crossed by the active NW-SE trans-Andean tectonic lineament known as the Calama-Olacapato-Toro (COT) fault system, which favours a high secondary permeability testified by the presence of numerous thermal springs. This study presents new stratigraphic, structural, volcanological, geochemical and hydrogeological data on the geothermal field. Our data suggest that the main geothermal reservoir is located within or below the Pre-Palaeozoic-Ordovician basement units, characterised by unevenly distributed secondary permeability. The reservoir is recharged by infiltration in the ridges above 4500 m a.s.l., where basement rocks are in outcrop. Below 4500 m a.s.l., the reservoir is covered by the low permeable Miocene-Quaternary units that allow a poor circulation of shallow groundwater. Geothermal fluids upwell in areas with more intense fracturing, especially where main regional structures, particularly NW-SE COT-parallel lineaments, intersect with secondary structures, such as at the Tocomar field.

  14. Tracing Geothermal Fluids

    Energy Technology Data Exchange (ETDEWEB)

    Michael C. Adams; Greg Nash

    2004-03-01

    Geothermal water must be injected back into the reservoir after it has been used for power production. Injection is critical in maximizing the power production and lifetime of the reservoir. To use injectate effectively the direction and velocity of the injected water must be known or inferred. This information can be obtained by using chemical tracers to track the subsurface flow paths of the injected fluid. Tracers are chemical compounds that are added to the water as it is injected back into the reservoir. The hot production water is monitored for the presence of this tracer using the most sensitive analytic methods that are economically feasible. The amount and concentration pattern of the tracer revealed by this monitoring can be used to evaluate how effective the injection strategy is. However, the tracers must have properties that suite the environment that they will be used in. This requires careful consideration and testing of the tracer properties. In previous and parallel investigations we have developed tracers that are suitable from tracing liquid water. In this investigation, we developed tracers that can be used for steam and mixed water/steam environments. This work will improve the efficiency of injection management in geothermal fields, lowering the cost of energy production and increasing the power output of these systems.

  15. Initial thermal state of the Los Humeros, Puebla, Mexico, geothermal field; Estado termico inicial del campo geotermico de Los Humeros, Puebla, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Gutierrez, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: aggarcia@iie.org.mx

    2009-01-15

    The initial temperatures field is presented for 40 wells in the Los Humeros geothermal reservoir, along with an elevation curve based on the formation temperature or the most probable reservoir temperature. Stabilized temperatures were estimated using the Radial Spherical Heat Flow method, chosen over the Horner method based on the numerical simulation of the circulation and stop processes of well H-26. In this well, the last temperature log series was reproduced, considering circulation losses. The temperatures were used to produce isothermal curves over three geological sections of the field, which represent the initial distribution of temperatures in the reservoir and show the thermal characteristics and the relationships among thermal anomalies and faults in the reservoir. The elevation curve plotted against the initial temperature of the formation was generated based on detection of the main feed zones at each well, which in turn was developed using detailed analyses of diverse information, such as temperature logs, circulation losses, lithology, well completion, and heat velocities. Based on the results, two groups of wells may be distinguished: one between 1000 and 1600 masl with temperatures from 290 to 330 degrees Celsius, and one between 900 and 0 masl with temperatures from 300 to 400 degrees Celsius. [Spanish] En este trabajo se presenta el campo de temperatura inicial del yacimiento geotermico de Los Humeros y una curva de elevacion contra la temperatura de formacion o temperatura mas probable del yacimiento, obtenida para 40 pozos del campo. Las temperaturas estabilizadas se estimaron mediante el metodo de Flujo de Calor Esferico Radial, y su eleccion sobre las temperaturas del metodo de Horner se soporta con simulacion numerica de los procesos de circulacion y paro del pozo H-26, en la cual la ultima serie de registros se reprodujo considerando perdidas de circulacion. Con estas temperaturas se generaron curvas isotermicas para tres secciones

  16. Initial distribution of pressure and temperature in the geothermal field of Los Humeros, Puebla; Distribucion inicial de presion y temperatura del campo geotermico de Los Humeros, Puebla

    Energy Technology Data Exchange (ETDEWEB)

    Arellano Gomez, Victor M.; Garcia Gutierrez, Alfonso; Barragan Reyes, Rosa Maria; Aragon Aguilar, Alfonso; Pizano, Arturo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    2000-07-01

    In order to infer the distributions of non disturbed pressure and temperature of the reservoir fluid, a considerable amount of information originating from several disciplines was analyzed, corresponding to 42 wells of the geothermal field of Los Humeros. On the base of the analyzed data models were developed, in one and two dimensions, of the reservoir in an initial state. The models reveal the existence of at least two reservoirs. The first one and most superficial is located between 1600 and 1025 m.a.s.l. and it is a reservoir of dominant liquid. The pressure profile of this reservoir corresponds to a boiling water column approximately between 300 and 339 Celsius degrees. The second reservoir is located underneath the 850 m.a.s.l. and as far as the collected data, it can be said that it extends at least until the 100 m.a.s.l and it is estimated that it is a reservoir of low liquid saturation. For the wells that are fed from this zone of the field temperatures between 300 and 400 Celsius degrees were estimated. A table of the geology of the subsoil of the region of the Los Humeros is shown and a table where the chemical composition of the separated water is indicated and the enthalpy of some of the wells of Los Humeros, Puebla, Mexico. [Spanish] Para inferir las distribuciones de presion y temperatura no perturbadas del fluido del yacimiento, se analizo una considerable cantidad de informacion proveniente de varias disciplinas, correspondiente a 42 pozos del campo geotermico de Los Humeros. Sobre la base de los datos analizados se desarrollaron modelos, en una y dos dimensiones, del yacimiento en un estado inicial. Los modelos revelan la existencia de cuando menos dos yacimientos. El primero y mas superficial se encuentra localizado entre 1600 y 1025 m.s.n.m. y es un yacimiento de liquido dominante. El perfil de presion de este yacimiento corresponde a una columna de agua en ebullicion aproximadamente entre 300 y 339 grados centigrados. El segundo yacimiento se

  17. Scaling control in superficial installations at the Las Tres Virgenes, geothermal field, BCS; Control de incrustacion en instalaciones superficiales del campo geotermico de Las Tres Virgenes, BCS

    Energy Technology Data Exchange (ETDEWEB)

    Tapia Salazar, Ruth [Comision Federal de Electricidad (Mexico)]. E-mail: ruth.tapia@cfe.gob.mx

    2007-01-15

    Silica scaling is one of the most important problems in the Las Tres Virgenes geothermal field. It affects not only the superficial installations, like brine injection pipelines, but also the injection wells where it reduces injection capacity. Separated brine passes from production wells to injection wells by means of steel pipelines 10 and 14 inches in diameter. The pipelines are affected by silica scaling that occurs when the two-phase fluid is discharged at atmospheric pressure and the separated brine is cooled and concentrated and then over saturated with amorphous silica. Even when the pipelines were cleaned periodically, it was necessary to implement a technique for prevent scaling. Two methods considered appropriate to the specific field conditions were studied, and finally the technique of modifying the brine pH was adopted. After over a year of using this technique in the general injection system, no mechanical cleaning of the pipelines has been necessary-and once cleaning was needed at least every third day. This represents an important improvement in the steam supply system. [Spanish] Uno de los problemas mas importantes en el campo geotermico de Las Tres Virgenes es la incrustacion por silice, la cual afecta no solo a instalaciones superficiales como lineas de inyeccion de salmuera, sino tambien a los pozos inyectores al reducir su capacidad de aceptacion. El agua producida por los pozos productores se conduce hasta los pozos inyectores por medio de tuberias de acero al carbon de 10 y 14 pulgadas de diametro, que se ven afectadas por la incrustacion de silice. La incrustacion ocurre debido a que cuando el fluido en dos fases es descargado a presion atmosferica, la salmuera separada, enfriada y concentrada, esta usualmente sobresaturada con respecto a la solubilidad de la silice amorfa. Aunque las tuberias se limpiaban mecanicamente, fue necesario seleccionar una tecnica para prevenir la incrustacion, para lo cual se estudiaron dos de los metodos que

  18. Presence of cross flow in the Cerro Prieto geothermal field, BC; Presencia de flujo cruzado en el campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Rodriguez, Marco Helio [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia General de Cerro Prieto, Mexicali, Baja California (Mexico)]. E-mail: marco.rodriguez01@cfe.gob.mx

    2011-01-15

    During the development of Cerro Prieto geothermal field, BC, exploitation has increased gradually, causing a continuous drop in pressure to almost 100 bars in the central and eastern parts of the field. This has occurred despite the high natural recharge induced by the reservoir exploitation and helped by the high permeability of the reservoir and the wide availability of natural recharge of low-temperature water in the vicinity. The strata above the production zones have significantly lower temperatures than these zones, but due to the particular characteristics of the reservoir, do not have pressure drops. As the pressure of producing strata declines, the hydraulic pressure differential between them and the overlying strata increases. Thus in recent years the phenomenon of cross flow occurs with greater frequency and severity. In this paper, this phenomenon is analyzed, detailing the specific mechanisms favoring it and identifying the stage (drilling or workover) in which it commonly occurs. Rigorous supervision during these stages is crucial to identifying cross flow and to taking necessary measures to save the well. Cross flow cases are presented at different stages in the history of a well: during drilling, repair, before and during the stimulation, and during production. [Spanish] Durante el desarrollo del campo geotermico de Cerro Prieto, BC, la explotacion se ha incrementado en forma gradual provocando una continua caida de presion, que en las porciones central y oriente ha sido de casi 100 bars. Esto ha ocurrido a pesar de la enorme recarga natural inducida por la explotacion, favorecida por la alta permeabilidad del yacimiento y la gran disponibilidad de recarga natural de agua de baja temperatura en los alrededores del mismo. Los estratos ubicados encima de las zonas productoras presentan temperaturas significativamente menores que estos, pero debido a las caracteristicas particulares del yacimiento, no han presentado abatimiento en su presion. En la

  19. The low-energy geothermics

    International Nuclear Information System (INIS)

    Low-energy geothermal resources are characterized by temperatures ranging from 30 to 100 C. The principal worldwide applications are: towns and greenhouses heating, spa bathing, agriculture products drying, etc.. Sources depth ranges from 1500 to 2500 m in porous and permeable formations (sandstones, sands, conglomerates, limestones..) carrying aquifers. The worldwide installed power was of about 11500 MWth in 1990, with an annual production of about 36000 GWh (about 1% of worldwide energy consumption). The annual production rate is estimated to 10% and would represent a 30000 and 80000 MWth power in 2000 and 2010, respectively. In France, low-energy geothermal resources are encountered principally in Mesozoic sediments of the Parisian and Aquitanian basins. French geothermics has developed during the last 30 years and principally between 1980 and 1985 after the second petroleum crack. After 1985, the decay of fossil fuel costs and the development of corrosion problems in the geothermal wells have led to the abandonment of the less productive fields and to the study of technical solutions to solve the corrosion problems. (J.S.). 1 fig., 5 photos

  20. Geothermal for kids

    International Nuclear Information System (INIS)

    This paper reports that educating children about geothermal energy is crucial to the future growth of the geothermal industry. The Geothermal Education Office (GEO) was founded in 1989 to provide materials and support to teachers and the geothermal community in educating grades K-12 about geothermal energy. GEO's goals are to: provide easy access to or referral to appropriate sources of geothermal information; foster teacher interest; create posters, booklets, lesson plans and other educational materials; monitor and review textbooks, encyclopedias and other educational materials distributed by educational groups to ensure inclusion of appropriate, accurate information and to encourage fair treatment of alternative energy resources; contribute articles to industry, science and educational publications; and foster communication and cooperation among GEO, the geothermal industry, government agencies, and educational and environmental groups

  1. Monitoring Biological Activity at Geothermal Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Peter Pryfogle

    2005-09-01

    The economic impact of microbial growth in geothermal power plants has been estimated to be as high as $500,000 annually for a 100 MWe plant. Many methods are available to monitor biological activity at these facilities; however, very few plants have any on-line monitoring program in place. Metal coupon, selective culturing (MPN), total organic carbon (TOC), adenosine triphosphate (ATP), respirometry, phospholipid fatty acid (PLFA), and denaturing gradient gel electrophoresis (DGGE) characterizations have been conducted using water samples collected from geothermal plants located in California and Utah. In addition, the on-line performance of a commercial electrochemical monitor, the BIoGEORGE?, has been evaluated during extended deployments at geothermal facilities. This report provides a review of these techniques, presents data on their application from laboratory and field studies, and discusses their value in characterizing and monitoring biological activities at geothermal power plants.

  2. Geothermal resource and utilization in Bulgaria

    International Nuclear Information System (INIS)

    Bulgarian territory is rich in thermal water of temperature in the range of 20 - 100oC. The highest water temperature (98oC) is measured in Sapareva banya geothermal reservoir. Electricity generation from geothermal water is not currently available in the country. The major direct thermal water use nowadays covers: balneology, space heating and air-conditioning, domestic hot water supply, greenhouses, swimming pools, bottling of potable water and geothermal ground source heat pumps (GSHP). The total installed capacity amounts to about 77.67 MW (excl. GSHP) and the produced energy is 1083.89 TJ/year. Two applications - balneology and geothermal ground source heat pumps show more stable development during the period of 2005 - 2010. The update information on the state-owned hydrothermal fields is based on issued permits and concessions by the state.

  3. Electronic geothermal atlases of Asian Russia

    Institute of Scientific and Technical Information of China (English)

    Albert DDuchkov; Michael Zheleznjak; Ludmila SSokolova

    2014-01-01

    Generalized geothermal data was used to produce two electronic atlases for Asian Russia, Geothermal Atlas of Siberia (GAS) (1995-2000) and Geothermal Atlas for Siberia and Russian Far East (GASRFE) (2009-2012). The atlases include heat flow maps, temperatures at depths of 0.5, 1, 2, 3, 5 km and lower boundary of permafrost. Quantitative values of pa-rameters are presented as isolines (GAS) and symbols (GASRFE). GAS website is located at the Trofimuk Institute (www.ipgg.sbras.ru/ru/institute/structure/geophysics/natural-fields). GASRFE provides the most complete geothermal data on Asian Russia, which has been growing for the last 50 years, and is published on the Internet at http://maps.nrcgit.ru/geoterm. In this atlas, data about the depth of permafrost lower boundary ("zero"isotherm) are pre-sented for the first time.

  4. Reference book on geothermal direct use

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.; Lund, J.W.; Rafferty, K.; Culver, G.

    1994-08-01

    This report presents the direct uses of geothermal energy in the United States. Topics discussed include: low-temperature geothermal energy resources; energy reserves; geothermal heat pumps; geothermal energy for residential buildings; and geothermal energy for industrial usage.

  5. Computational methods for planning and evaluating geothermal energy projects

    International Nuclear Information System (INIS)

    In planning, designing and evaluating a geothermal energy project, a number of technical, economic, social and environmental parameters should be considered. The use of computational methods provides a rigorous analysis improving the decision-making process. This article demonstrates the application of decision-making methods developed in operational research for the optimum exploitation of geothermal resources. Two characteristic problems are considered: (1) the economic evaluation of a geothermal energy project under uncertain conditions using a stochastic analysis approach and (2) the evaluation of alternative exploitation schemes for optimum development of a low enthalpy geothermal field using a multicriteria decision-making procedure. (Author)

  6. Enhanced Geothermal Systems

    Energy Technology Data Exchange (ETDEWEB)

    Jeanloz, R. [The MITRE Corporation, McLean, VA (United States); Stone, H. [The MITRE Corporation, McLean, VA (United States); et al.

    2013-12-31

    DOE, through the Geothermal Technologies Office (GTO) within the Office of Energy Efficiency and Renewable Energy, requested this study, identifying a focus on: i) assessment of technologies and approaches for subsurface imaging and characterization so as to be able to validate EGS opportunities, and ii) assessment of approaches toward creating sites for EGS, including science and engineering to enhance permeability and increase the recovery factor. Two days of briefings provided in-depth discussion of a wide range of themes and challenges in EGS, and represented perspectives from industry, government laboratories and university researchers. JASON also contacted colleagues from universities, government labs and industry in further conversations to learn the state of the field and potential technologies relevant to EGS.

  7. Fifteen years of seismic monitoring at the Las Tres Virgenes, BCS, geothermal field; Quince anos de monitoreo sismico en el campo geotermico de Las Tres Virgenes, BCS

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz Prieto, Irais; Lorenzo Pulido, Cecilia [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: cecilia.lorenzo@cfe.gob.mx

    2009-07-15

    Seismic monitoring at the Las Tres Virgenes, BCS, geothermal field started in 1992 with an analog station of vertical components detecting a large number of earthquakes of varying magnitudes. In February 1993, a seismic network was installed, composed of six digital stations DR-2000-with S-6000 and S-5000 sensors and three registration channels (N-S, E-W and vertical). This was the basis for the development of a program to correct arrival-time data for P and S waves due to instrument drift. From January to April 1994 and May to August 1995, based on the 170 seismic events recorded, a velocity model was proposed. From December 1995 to July 1996, seismic data were processed and interpreted, and zones of occurrence were determined for events according to magnitude and the predominant noise in the field. From September 2003 to December 2004, 10 seismic stations (permanent and temporary) were installed and monitored and it was concluded the most active fault system was El Volcan. From September to December 2004, production wells LV-4 and LV-13 were acid-stimulated and seismic monitoring during this period allowed for the definition of two important seismic zones, both related to the El Volcan fault system and to injection well LV-8. After reopening these production wells, it was concluded an increase in seismic activity had occurred. From May to August 2006, information was compiled from the seismic network and it was concluded El Partido had became the most active fault system. Presently the seismic network in this field is composed of one SARA station and four K2 units. The SARA station is telemetrically connected to the base station. [Spanish] En el campo geotermico de Las Tres Virgenes, BCS, el monitoreo sismico empezo a partir de 1992 con una sola estacion analogica de registro vertical, la cual detecto una gran cantidad de temblores de distintas magnitudes. En febrero de 1993 se instalo una red sismica con seis estaciones digitales DR-2000 con sensores S-6000 y S

  8. The use of Geothermal Energy Resources in the Tourism Industry of Vojvodina (Northern Serbia)

    OpenAIRE

    Nemanja Tomić; Rastislav Stojsavljević; Igor Stamenković; Dejan Berić

    2013-01-01

    Exploitation of geothermal energy in Vojvodina is still at an unjustly low level taking into account the abundance of resource locations, some of which are ranked among the most affluent in Europe. Moreover, development of geothermal exploitation started in Serbia at about the same time as in other countries whose geothermal energy facilities are now at the highest technological level and which are leaders in this field. The largest use of geothermal energy in Vojvodina is present in the non-...

  9. Second workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.; Ramey, H.J. Jr. (eds.)

    1976-12-03

    The Arab oil embargo of 1973 focused national attention on energy problems. A national focus on development of energy sources alternative to consumption of hydrocarbons led to the initiation of research studies of reservoir engineering of geothermal systems, funded by the National Science Foundation. At that time it appeared that only two significant reservoir engineering studies of geothermal reservoirs had been completed. Many meetings concerning development of geothermal resources were held from 1973 through the date of the first Stanford Geothermal Reservoir Engineering workshop December 15-17, 1975. These meetings were similar in that many reports dealt with the objectives of planned research projects rather than with results. The first reservoir engineering workshop held under the Stanford Geothermal Program was singular in that for the first time most participants were reporting on progress inactive research programs rather than on work planned. This was true for both laboratory experimental studies and for field experiments in producing geothermal systems. The Proceedings of the December 1975 workshop (SGP-TR-12) is a remarkable document in that results of both field operations and laboratory studies were freely presented and exchanged by all participants. With this in mind the second reservoir engineering workshop was planned for December 1976. The objectives were again two-fold. First, the workshop was designed as a forum to bring together researchers active in various physical and mathematical branches of the developing field of geothermal reservoir engineering, to give participants a current and updated view of progress being made in the field. The second purpose was to prepare this Proceedings of Summaries documenting the state of the art as of December 1976. The proceedings will be distributed to all interested members of the geothermal community involved in the development and utilization of the geothermal resources in the world. Many notable

  10. Geothermal energy worldwide

    International Nuclear Information System (INIS)

    Geothermal energy, as a natural steam and hot water, has been exploited for decades in order to generate electricity as well as district heating and industrial processes. The present geothermal electrical installed capacity in the world is about 10.000 MWe and the thermal capacity in non-electrical uses is about 8.200 MWt. Electricity is produced with an efficiency of 10-17%, and the cost of the kWh is competitive with conventional energy sources. In the developing countries, where a total installed electrical power is still low, geothermal energy can play a significant role: in El Salvador, for example, 25% of electricity comes from geothermal spring, 20% in the Philippines and 8% in Kenya. Present technology makes it possible to control the environmental impact of geothermal exploitation. Geothermal energy could also be extracted from deep geopressured reservoirs in large sedimentary basins, hot dry rock systems and magma bodies. (author)

  11. The geothermal power organization

    Energy Technology Data Exchange (ETDEWEB)

    Scholl, K.L. [National Renewable Energy Lab., Golden, CO (United States)

    1997-12-31

    The Geothermal Power Organization is an industry-led advisory group organized to advance the state-of-the-art in geothermal energy conversion technologies. Its goal is to generate electricity from geothermal fluids in the most cost-effective, safe, and environmentally benign manner possible. The group achieves this goal by determining the Member`s interest in potential solutions to technological problems, advising the research and development community of the needs of the geothermal energy conversion industry, and communicating research and development results among its Members. With the creation and adoption of a new charter, the Geothermal Power Organization will now assist the industry in pursuing cost-shared research and development projects with the DOE`s Office of Geothermal Technologies.

  12. Geothermal Today - 2001

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-08-01

    U.S. Department of Energy Geothermal Energy Program Highlights Partnering with Industry A New Power Source for Nevada Drilling Research Finding Geothermal Resources Small-Scale Geothermal Power Plants The Heat Beneath Your Feet R&D 100 Award Program in Review Milestones January 2000 The U.S. Department of Energy GeoPowering the West initiative was launched. February 2000 Grants totaling $4.8 million were awarded in six western states, primarily for development of reservoir exploration, character

  13. Economics of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Morris, G.E.; Tester, J.W.; Graves, G.A.

    1980-01-01

    A selected summary is presented of the resource, technical, and financial considerations which influence the economics of geothermal energy in the US. Estimates of resource base and levelized busbar cost of base load power for several types of geothermal resources are compared with similar estimates for more conventional energy resources. Current geothermal electric power plants planned, under construction, and on-line in the US are noted.

  14. Geothermal Today - 1999

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-05-01

    U.S. Department of Energy 1999 Geothermal Energy Program Highlights The Hot Facts Getting into Hot Water Turning Waste water into Clean Energy Producing Even Cleaner Power Drilling Faster and Cheaper Program in Review 1999: The Year in Review JanuaryCal Energy announced sale of Coso geothermal power plants at China Lake, California, to Caithness Energy, for $277 million. U.S. Export-Import Bank completed a $50 million refinancing of the Leyte Geothermal Optimization Project in the Philippines. F

  15. Geothermal Drilling Organization

    Energy Technology Data Exchange (ETDEWEB)

    Sattler, A.R.

    1999-07-07

    The Geothermal Drilling Organization (GDO), founded in 1982 as a joint Department of Energy (DOE)-Industry organization, develops and funds near-term technology development projects for reducing geothermal drilling costs. Sandia National Laboratories administers DOE funds to assist industry critical cost-shared projects and provides development support for each project. GDO assistance to industry is vital in developing products and procedures to lower drilling costs, in part, because the geothermal industry is small and represents a limited market.

  16. Slavia goes geothermal

    International Nuclear Information System (INIS)

    The investment company Slavia Capital signed a memorandum of understanding with the mayors of Presov and Teriakovce concerning a geothermal project. According to Slavia's plans, the geothermal source near Teriakovce, which contains water measuring 125 degrees Celsius, will be used for Presov's heating system. The 30 million eur project will create roughly 400 jobs. There is also a plan to build a power plant using geothermal water. (author)

  17. Field study and three-dimensional reconstruction of thrusts and strike-slip faults in the Central Andes: implications for deep-seated geothermal circulation and ore deposits exploration

    Science.gov (United States)

    Norini, Gianluca; Groppelli, Gianluca; Giordano, Guido; Baez, Walter; Becchio, Raul; Viramonte, Jose; Arnosio, Marcelo

    2014-05-01

    The Puna plateau (NW Argentina), located in the back-arc of the Central Andes, is a plateau characterized by both orogen-parallel and orogen-oblique deformation styles, extensive magmatic and geothermal activity, and the broad occurrence of igneous and hydrothermal ore-forming minerals. In this area, like in other convergent margins, the behaviour of the magma-tectonics interplay can affect the circulation of hydrothermal fluids, so that the full comprehension of the tectonic control on the magmas and fluids paths in the continental crust is crucial to plan the geothermal and ore exploration. In this study, we present a structural analysis of the back-arc portion of the orogen-oblique Calama-Olacapato-El Toro fault system and the surrounding orogen-parallel thrust faults in the central-eastern Puna Plateau, comprising the Cerro Tuzgle-Tocomar geothermal volcanic area, with high geothermal potential, and silicic calderas and domes associated with epithermal ore deposits. We also focused on the tectonic and volcanotectonic structures of the Chimpa and Tuzgle stratovolcanoes, two of the most important polygenetic volcanic centres of the plateau. Morphostructural analysis and field mapping reveal the geometry, kinematics and dynamics of the tectonic structures of the studied area. These data and the available stratigraphic and geophysical data have been integrated with the software MOVE and PETREL in a three-dimensional reconstruction of the main fault planes, showing their attitude and intersections at depth. As a result of our study, we show that despite different geometry and kinematics of the Calama-Olacapato-El Toro fault system and the thrust faults, they formed and evolved under the same progressive evolving dynamic state, forming a single tectonic system and accommodating crustal shortening of a thickened crust. In this frame, the crust underwent simultaneous deformation along both the low-angle thrust faults and the vertical transcurrent strike-slip faults

  18. Calcite solubility in simulated geothermal brines

    Energy Technology Data Exchange (ETDEWEB)

    Pool, K.H.; Raney, P.J.; Shannon, D.W.

    1987-02-01

    The deposition of scale on geothermal piping surfaces has been recognized as a cause of increased pressure drop and diminished fluid flow. The two most common scales encountered in the geothermal energy field are silica and calcite. The main purpose of this study was to obtain accurate, reliable calcite solubility data in brines similar to natural geothermal brines over the temperature range of most known exploitable geothermal resources. In addition, geothermal fluid equilibrium modeling efforts and data bases can be refined and fine-turned with respect to the commercially important calcite-geothermal fluid stability problem with these data. The effect of sodium chloride and sodium bicarbonate on the solubility of CaCO/sub 3/ (calcite) in high temperature solutions was measured over the 100 to 300/sup 0/C temperature range. The brines studied contained 0 to 5 wt % NaCl, 0 to 5 mM NaHCO/sub 3/, and 0.003 to 0.1 M CO/sub 2/. The data detailing calcite solubility at various temperatures are presented in tabular, graphical, and regression-equation form for each brine composition tested.

  19. Initial temperature distribution in Los Humeros, Mexico, geothermal field; Distribucion de temperatura inicial en el campo geotermico de Los Humeros, Puebla

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A; Arellano, V; Aragon, A; Barragan, R.M; Izquierdo, G [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Pizano, A [Comision federal de Electricidad, Los Humeros, Puebla (Mexico)

    2000-12-01

    The initial formation temperatures surrounding 40 wells from the Los Humeros geothermal field are presented. These temperatures were estimated using the Horner and the sphere methods. A brief discussion on the applicability of each method is presented and previous applications are detailed. Then the more likely reservoir temperature of each well versus elevation is plotted based on the estimations about the main feed zone and the temperature of each well. The boiling with depth curve for pure water is also included. Two longitudinal and one traverse geological sections are presented to illustrate the field initial temperature distribution, the lithology and layers thickness, the basement topography and the wells traversed along each sections. Also, the main feed zones of the wells are indicated. Finally, the last series of measured temperature logs in well H-26 are produced by numerical simulation. This considers the well circulation losses and an assumed initial temperature profile. This profile iteratively modified until the computed profiles match the measured temperature profiles. The last assumed temperature profile is then considered as the best approximation to the undisturbed formation temperature around well H-26 and it is then compared with the stabilized temperatures obtained via the Horner and Sphere methods. [Spanish] Se presentan las temperaturas iniciales o estabilizadas de la formacion circundante a 40 pozos del campo geotermico Los Humeros, las cuales se estimaron mediante los metodos de Horner y el metodo de la esfera. Se presenta una discusion sobre la aplicacion de cada metodo y se detallan las aplicaciones previas del metodo de la esfera. Posteriormente y con base en las estimaciones de las principales zonas de aporte de cada pozo y sus correspondientes temperaturas se grafican las temperaturas mas probables de yacimiento para cada pozo contra la elevacion y se incluye en la misma grafica la curva de ebullicion del agua contra la elevacion. Se

  20. Structural control on geothermal circulation in the Cerro Tuzgle-Tocomar geothermal volcanic area (Puna plateau, Argentina)

    Science.gov (United States)

    Giordano, Guido; Pinton, Annamaria; Cianfarra, Paola; Baez, Walter; Chiodi, Agostina; Viramonte, José; Norini, Gianluca; Groppelli, Gianluca

    2013-01-01

    The reconstruction of the stratigraphical-structural framework and the hydrogeology of geothermal areas is fundamental for understanding the relationships between cap rocks, reservoir and circulation of geothermal fluids and for planning the exploitation of the field. The Cerro Tuzgle-Tocomar geothermal volcanic area (Puna plateau, Central Andes, NW Argentina) has a high geothermal potential. It is crossed by the active NW-SE trans-Andean tectonic lineament known as the Calama-Olacapato-Toro (COT) fault system, which favours a high secondary permeability testified by the presence of numerous springs. This study presents new stratigraphic and hydrogeological data on the geothermal field, together with the analysis from remote sensed image analysis of morphostructural evidences associated with the structural framework and active tectonics. Our data suggest that the main geothermal reservoir is located within or below the Pre-Palaeozoic-Ordovician basement units, characterised by unevenly distributed secondary permeability. The reservoir is recharged by infiltration in the ridges above 4500 m a.s.l., where basement rocks are in outcrop. Below 4500 m a.s.l., the reservoir is covered by the low permeable Miocene-Quaternary units that allow a poor circulation of shallow groundwater. Geothermal fluids upwell in areas with more intense fracturing, especially where main regional structures, particularly NW-SE COT-parallel lineaments, intersect with secondary structures, such as at the Tocomar field. Away from the main tectonic features, such as at the Cerro Tuzgle field, the less developed network of faults and fractures allows only a moderate upwelling of geothermal fluids and a mixing between hot and shallow cold waters. The integration of field-based and remote-sensing analyses at the Cerro Tuzgle-Tocomar area proved to be effective in approaching the prospection of remote geothermal fields, and in defining the conceptual model for geothermal circulation.

  1. Steam saving during maintenance of the 50-MW Unit 7 at Los Azufres geothermal field, Michoacan; Ahorro de vapor durante el mantenimiento de la Unidad 7 de 50 MW en el campo geotermico de Los Azufres, Michoacan

    Energy Technology Data Exchange (ETDEWEB)

    Medina Barajas, Elvia Nohemi; Ruiz Lemus, Alejandro [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia de Los Azufres, Morelia, Michoacan (Mexico)]. E-mail: elvia-medina@cfe.gob.mx

    2011-07-15

    Commercial-steam production in the southern area of Los Azufres, Mich., Mexico, Geothermal Field began in 1982 with the operation of Unit 2, the backpressure 5-MW unit, and continued in 1988 when the 50-MW condensing Unit 7 was commissioned. Today to supply steam to Unit 7, it is necessary to gather steam from 15 production wells, amounting 450 tons per hour (t/h) under operating conditions. During maintenance periods for Unit 7, production wells are removed from the steam-supply system but continue producing steam that is discharged to the atmosphere-a loss affecting the economic life of the geothermal reservoir. Therefore several actions have been proposed and tried to save the steam and preserve the geothermal resource. This paper presents the results of the actions and the technical and economic benefits obtained from them. [Spanish] La produccion de vapor con fines comerciales en la zona sur del campo geotermico de Los Azufres, Mich., Mexico, empezo en 1982 con la puesta en marcha de la Unidad 2 de 5 MW a contrapresion, para continuar en 1988 con la Unidad 7 de 50 MW a condensacion. Para cumplir con el suministro de vapor a la U-7, a la fecha es necesario integrar la produccion de 15 pozos productores, que producen un total de 450 toneladas por hora (t/h) a condiciones de operacion. Durante los periodos de mantenimiento de la U-7 los pozos son desintegrados del sistema de suministro, pero continuan produciendo vapor, el cual es descargado a la atmosfera sin ningun provecho, lo que representa una perdida que afecta la vida util del yacimiento geotermico. Por ello se han propuesto y aplicado diversas acciones operativas en cada uno de esos pozos con el objetivo de ahorrar vapor y preservar el recurso geotermico. En este trabajo se presentan los resultados de esas acciones y los beneficios tecnicos y economicos obtenidos.

  2. GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20081086 Feng Wujun(Geological Research Institute,Jiangsu Oil Field Branch Company,Yangzhou 225012,Jiangsu);Cao Bing Geoheat Resources Evaluation and Target Optimization in Gaoyou Region of Jiangsu Province(Jiangsu Geology,ISSN1003-6474,CN32-1258/P,31(2),2007,p.130-13

  3. Results of an injection test using ethyl alcohol as tracer at Los Humeros geothermal field, Puebla, Mexico; Resultados de una prueba de inyeccion de alcohol empleado como trazador, en el campo geotermico de Los humeros, Puebla, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Tovar Aguado, Rigoberto; Lopez Romero, Oscar [Comision Federal de Electricidad, Los Humeros, Puebla (Mexico)

    2000-12-01

    Los Humeros is the third Mexican geothermal field where ethyl alcohol was used as organic tracer to test communication between wells. The first Mexican geothermal field where this kind of test was used Los Azufres, Michoacan. The second was Las Tres Virgenes, Baja California Sur. In both cases, connections between wells were observed. The injection well H-29 is in the north-central sector of Los Humeros geothermal field, Puebla, Mexico. At a depth of 1580 meters, 600 liters of ethyl alcohol was pumped through a 60.35 mm (23/8 inch) diameter tube after 2.7 m{sup 3} of geothermal fluids were displaced, allowing the alcohol to reach the formation. Then, the normal injection process continued with water and condensed steam (130 t/h). On the basis of the experience acquired with similar tests conducted at Las Tres Virgenes geothermal field, and with the goal of detecting the tracer, samples of condensed steam were collected in nearby wells (H-15, H-16, H-17, H-30, H-33, H-36 and H-8) and in distant wells-named special samples (H-32, H-1, H-11, H-12, H-19, H-20, H-35, H-37, H-39, H-6 and H-9). Condensed steam samples were collected every 12 hours, the every week and finally every 15 days, making a total of 592 samples. The chemical analysis were done in two stages because of probable with the chromatograph. In the first stage, 441 samples were run and the rest were run in the second stage. No evidence of the tracer was observed in the monitoring wells. The results confirm the existence of a low-to-moderate permeability, as was previously interpreted using pressure log data. [Spanish] Los Humeros es el tercer campo geotermico de Mexico en el que se realiza una prueba de trazadores organicos empleando alcohol etilico con la finalidad principal de conocer si existe comunicacion entre pozos. El primer campo geotermico en el que se realizo esta prueba fue el de Los Azufres, Michoacan y el segundo el de Las Tres Virgenes, Baja California Sur; en ambos casos se encontro

  4. 1992--1993 low-temperature geothermal assessment program, Colorada

    Energy Technology Data Exchange (ETDEWEB)

    Cappa, J.A.; Hemborg, H.T.

    1995-01-01

    Previous assessments of Colorado`s low-temperature geothermal resources were completed by the Colorado Geological Survey in 1920 and in the mid- to late-1970s. The purpose of the 1992--1993 low-temperature geothermal resource assessment is to update the earlier physical, geochemical, and utilization data and compile computerized databases of the location, chemistry, and general information of the low-temperature geothermal resources in Colorado. The main sources of the data included published data from the Colorado Geological Survey, the US Geological Survey WATSTOR database, and the files of the State Division of Water Resources. The staff of the Colorado Geological Survey in 1992 and 1993 visited most of the known geothermal sources that were recorded as having temperatures greater than 30{degrees}C. Physical measurements of the conductivity, pH, temperature, flow rate, and notes on the current geothermal source utilization were taken. Ten new geochemical analyses were completed on selected geothermal sites. The results of the compilation and field investigations are compiled into the four enclosed Quattro Pro 4 databases. For the purposes of this report a geothermal area is defined as a broad area, usually less than 3 sq mi in size, that may have several wells or springs. A geothermal site is an individual well or spring within a geothermal area. The 1992-1993 assessment reports that there are 93 geothermal areas in the Colorado, up from the 56 reported in 1978; there are 157 geothermal sites up from the 125 reported in 1978; and a total of 382 geochemical analyses are compiled, up from the 236 reported in 1978. Six geothermal areas are recommended for further investigation: Trimble Hot Springs, Orvis Hot Springs, an area southeast of Pagosa Springs, the eastern San Luis Valley, Rico and Dunton area, and Cottonwood Hot Springs.

  5. Geothermal Produced Fluids: Characteristics, Treatment Technologies, and Management Options

    Energy Technology Data Exchange (ETDEWEB)

    Finster, Molly; Clark, Corrie; Schroeder, Jenna; Martino, Louis

    2015-10-01

    Geothermal power plants use geothermal fluids as a resource and create waste residuals as part of the power generation process. Both the geofluid resource and the waste stream are considered produced fluids. The chemical and physical nature of produced fluids can have a major impact on the geothermal power industry and can influence the feasibility of geothermal power development, exploration approaches, power plant design, operating practices, and the reuse or disposal of residuals. In general, produced fluids include anything that comes out of a geothermal field and that subsequently must be managed on the surface. These fluids vary greatly depending on the geothermal reservoir being harnessed, power plant design, and the life cycle stage in which the fluid exists, but generally include water and fluids used to drill geothermal wells, fluids used to stimulate wells in enhanced geothermal systems, and makeup and/or cooling water used during operation of a geothermal power plant. Additional geothermal-related produced fluids include many substances that are similar to waste streams from the oil and gas industry, such as scale, flash tank solids, precipitated solids from brine treatment, hydrogen sulfide, and cooling-tower-related waste. This review paper aims to provide baseline knowledge on specific technologies and technology areas associated with geothermal power production. Specifically, this research focused on the management techniques related to fluids produced and used during the operational stage of a geothermal power plant; the vast majority of which are employed in the generation of electricity. The general characteristics of produced fluids are discussed. Constituents of interest that tend to drive the selection of treatment technologies are described, including total dissolved solids, noncondensable gases, scale and corrosion, silicon dioxide, metal sulfides, calcium carbonate, corrosion, metals, and naturally occurring radioactive material. Management

  6. Geothermal gradients in the steen river area of Northwestern Alberta

    Science.gov (United States)

    Jones, F. W.; Lam, H. L.

    1984-03-01

    A total of 6540 bottom-hole temperature values from 1879 petroleum exploration wells in northwestern Alberta in the region 57°N-60°N and 114°W-120°W have been used to estimate temperature gradients there. A thermal gradient contour map constructed for the region shows a number of local high geothermal gradient areas. Comparison with available aeromagnetic and gravity maps indicates that a high geothermal gradient near Steen River is probably associated with an igneous intrusion and that nearby high geothermal gradient areas may be due to the transport of heat away from the basement by upward and lateral water motion. Also, it is noted that, in this region of Alberta, oil field locations appear to coincide with areas of low geothermal gradient, whereas gas fields appear to coincide with high geothermal gradients.

  7. Geothermal Program Review XVII: proceedings. Building on 25 years of Geothermal Partnership with Industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-01

    The US Department of Energy's Office (DOE) of Geothermal Technologies conducted its annual Program Review XVII in Berkeley, California, on May 18--20, 1999. The theme this year was "Building on 25 Years of Geothermal Partnership with Industry". In 1974, Congress enacted Public Law 93-410 which sanctioned the Geothermal Energy Coordination and Management Project, the Federal Government's initial partnering with the US geothermal industry. The annual program review provides a forum to foster this federal partnership with the US geothermal industry through the presentation of DOE-funded research papers from leaders in the field, speakers who are prominent in the industry, topical panel discussions and workshops, planning sessions, and the opportunity to exchange ideas. Speakers and researchers from both industry and DOE presented an annual update on research in progress, discussed changes in the environment and deregulated energy market, and exchanged ideas to refine the DOE Strategic Plan for research and development of geothermal resources in the new century. A panel discussion on Climate Change and environmental issues and regulations provided insight into the opportunities and challenges that geothermal project developers encounter. This year, a pilot peer review process was integrated with the program review. A team of geothermal industry experts were asked to evaluate the research in progress that was presented. The evaluation was based on the Government Performance and Results Act (GPRA) criteria and the goals and objectives of the Geothermal Program as set forth in the Strategic Plan. Despite the short timeframe and cursory guidance provided to both the principle investigators and the peer reviewers, the pilot process was successful. Based on post review comments by both presenters and reviewers, the process will be refined for next year's program review.

  8. Results of investigation at the Miravalles Geothermal Field, Costa Rica: Part 1, Well logging. Resultados de las investigaciones en el campo geotermico de Miravalles, Costa Rica: Parte 1, Registros de pozos

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, B.R.; Lawton, R.G.; Kolar, J.D.; Alvarado, A.

    1989-03-01

    The well-logging operations performed in the Miravalles Geothermal Field in Costa Rica were conducted during two separate field trips. The Phase I program provided the deployment of a suite of high-temperature borehole instruments, including the temperature/rabbit, fluid sampler, and three-arm caliper in Well PGM-3. These same tools were deployed in Well PGM-10 along with an additional survey run with a combination fluid velocity/temperature/pressure instrument used to measure thermodynamic properties under flowing well conditions. The Phase II program complemented Phase I with the suite of tools deployed in Wells PGM-5, PGM-11, and PGM-12. 4 refs., 25 figs., 1 tab.

  9. Geothermal Progress Monitor, report No. 13

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    Geothermal Progress Monitor (GPM) Issue No. 13 documents that most related factors favor the growth and geographic expansion of the US geothermal industry and that the industry is being technologically prepared to meet those challenges into the next century. It is the function of GPM to identify trends in the use of this resource and to provide a historical record of its development pathway. The information assembled for this issue of GPM indicates that trends in the use of geothermal energy in this country and abroad continue to be very positive. Favorable sentiments as well as pertinent actions on the part of both government and industry are documented in almost every section. The FEDERAL BEAT points up that the National Energy Strategy (NES) developed at the highest levels of the US government recognizes the environmental and energy security advantages of renewable energy, including geothermal, and makes a commitment to substantial diversification'' of US sources of energy. With the announcement of the construction of several new plants and plant expansions, the INDUSTRY SCENE illustrates industry's continued expectation tha the use of geothermal energy will prove profitable to investors. In DEVELOPMENT STATUS, spokesmen for both an investor-owned utility and a major geothermal developer express strong support for geothermal power, particularly emphasizing its environmental advantages. DEVELOPMENT STATUS also reports that early successes have been achieved by joint DOE/industry R D at The Geysers which will have important impacts on the future management of this mature field. Also there is increasing interest in hot dry rock. Analyses conducted in support of the NES indicate that if all the postulated technology developments occur in this field, the price of energy derived from hot dry rock in the US could drop.

  10. Geochemical study on boron isotopes in the Yangbajing geothermal field, Tibet%西藏羊八井地热田硼同位素地球化学特征初步研究

    Institute of Scientific and Technical Information of China (English)

    吕苑苑; 赵平; 许荣华; 谢烈文

    2012-01-01

    基于国外大量硼同位素示踪的地热研究实例,在先期建立的MC-ICP-MS测定水中硼同位素分析方法基础上,以羊八井地热田为研究对象,进行了热田地热流体的硼同位素地球化学初步研究.研究表明,羊八井地热田区热储流体的硼同位素值为-10.5‰~-9.1‰,为非海相来源;结合区域地质特征,研究认为热储内的硼组分来源于蚀变花岗岩围岩,并且蚀变花岗岩的硼同位素特征可能与深层地热流体相似.研究表明羊八井浅层热储内硼元素的地球化学行为并非完全是保守元素,存在着一定的硼同位素分馏.在端元硼同位素特征差异较小的羊八井热田,为硼同位素二元混合模型示踪水体混合过程带来了相当的复杂性.本文从热田开采过程与采样时间、水—岩相互作用、气—液相分离以及结垢过程等方面分析了浅层热储内引起硼同位素分馏的可能因素,其中从整体来看,气—液相分离过程的影响相对较大;而在个别井位水—岩相互作用与结垢的影响可能相对较为显著.%Based on previous geothermal tracing researches by boron isotopes, and by utilizing the state-of-art MC-ICP-MS analytical technique for measuring boron isotope ratios, the mixing processes between deep geothermal water and surface cold water of the Yangbajing ( YBJ) geothermal field in Tibet were determined. The 8 B values of geothermal water range from -10. 5‰ to -9. 1 ‰, indicating the non-marine sources. And further we propose that B is derived from host altered granite according to regional geological features,and the host altered granite should have similar boron isotope ratios to the deep geothermal water. Shallow geothermal water samples suggest that there is fractionation of B isotopes in the YBJ shallow reservoir. Accordingly, some complicated factors will be introduced into the two end-member mixing model in the YBJ since there is only little difference of

  11. Prospects of geothermal energy

    International Nuclear Information System (INIS)

    Geothermal energy has great potential as a renewable energy with low environmental impact, the use of heat pumps is becoming established in Italy but the national contributions are still modest when compared to other nations. Mature technologies could double the installed geothermal power in Italy at 2020.

  12. Geothermal Financing Workbook

    Energy Technology Data Exchange (ETDEWEB)

    Battocletti, E.C.

    1998-02-01

    This report was prepared to help small firm search for financing for geothermal energy projects. There are various financial and economics formulas. Costs of some small overseas geothermal power projects are shown. There is much discussion of possible sources of financing, especially for overseas projects. (DJE-2005)

  13. Geothermal energy statistics 2002-2003 for Switzerland

    International Nuclear Information System (INIS)

    Herein, the Swiss geothermal energy production of the years 2002 and 2003 is statistically compiled. Again, an increase of the total geothermal-driven energy can be noted, reaching more than 1.1 TWh, with a geothermal energy share greater than 860 GWh. (The difference is the non-geothermal energy needed by the heat pump systems involved.) Since 2000 the installed capacity could be increased by 20%, i.e. 40 MW per year. Geothermal energy is mainly used in combination with heat pump- (HP-) systems for heating purposes (>700 GWh), of which >80% are produced by borehole heat exchanger (BHE) systems. The remaining HP-utilization splits up into ground water utilization (about 15%), deep BHE, foundation pile systems and tunnel water. Non HP-dependent geothermal utilizations are mainly thermal-springs applications for balneological use. Their contribution is nearly constant over the year. Together with the HP sales figures, the BHE drilling meters are now included in the present statistics. Since 2003, the compilation of the drilled lengths also includes the specifications of BHE fields with more than 10 BHE each. Such BHE fields make up >10% of the total drilled length. More and more frequently, such fields are used for the cooling of buildings as well. In order to clearly display these geothermal applications in the future, such BHE fields should be systematically registered, as it is now done for foundation pile systems and BHE systems. Of great importance for the promotion of geothermal energy are the activities of the Center of Competence 'Geothermal energy' and its regional information centers. The currently available funding allows the financing of information and know-how dissemination as well as education. All of these activities are essential for a further increase in geothermal energy production. (author)

  14. Geothermal Program Review XI: proceedings. Geothermal Energy - The Environmental Responsible Energy Technology for the Nineties

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    These proceedings contain papers pertaining to current research and development of geothermal energy in the USA. The seven sections of the document are: Overview, The Geysers, Exploration and Reservoir Characterization, Drilling, Energy Conversion, Advanced Systems, and Potpourri. The Overview presents current DOE energy policy and industry perspectives. Reservoir studies, injection, and seismic monitoring are reported for the geysers geothermal field. Aspects of geology, geochemistry and models of geothermal exploration are described. The Drilling section contains information on lost circulation, memory logging tools, and slim-hole drilling. Topics considered in energy conversion are efforts at NREL, condensation on turbines and geothermal materials. Advanced Systems include hot dry rock studies and Fenton Hill flow testing. The Potpourri section concludes the proceedings with reports on low-temperature resources, market analysis, brines, waste treatment biotechnology, and Bonneville Power Administration activities. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  15. Idaho Geothermal Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, Gay Davis; Esposito, Louis; Montgomery, Martin

    1979-07-01

    Idaho's energy problems have increased at alarming rates due to their dependency on imports of gas and oil. The large hydroelectric base developed in Idaho has for years kept the electric rates relatively low and supplied them with energy on a consumer demand basis. However, this resource cannot be 4expected to meet their growing demands in the years to come. Energy alternatives, in whatever form, are extremely important to the future welfare of the State of Idaho. This handbook addresses the implications, uses, requirements and regulations governing one of Idaho's most abundant resources, geothermal energy. The intent of the Idaho Geothermal Handbook is to familiarize the lay person with the basis of geothermal energy in Idaho. The potential for geothermal development in the State of Idaho is tremendous. The authors hope this handbook will both increase your knowledge of geothermal energy and speed you on your way to utilizing this renewable resource.

  16. Geothermal Loan Guaranty Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-11-17

    Presently the US imports a large proportion of its petroleum requirements. This dependence on foreign petroleum has had a major impact on our economy. As a result, the Federal government is sponsoring programs to offset this foreign reliance by conservation of oil and gas, conversion of petroleum using facilities to coal and nuclear energy and the development of alternate sources of energy. One of the most acceptable alternate resources is geothermal. It offers an environmentally sound energy resource, can be developed at reasonable cost in comparison to other forms of energy and has a long term production capacity. On September 3, 1974, the Geothermal Energy Research Development and Demonstration Act was enacted to further the research, development and demonstration of geothermal energy technologies. This Act also established the Geothermal Loan Guaranty Program to assist in the financing of geothermal resource development, both electrical and non-electrical. The highlights of that Guaranty Program are detailed in this report.

  17. Geothermal energy: a brief assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lunis, B.C.; Blackett, R.; Foley, D. (eds.)

    1982-07-01

    This document includes discussions about geothermal energy, its applications, and how it is found and developed. It identifies known geothermal resources located in Western's power marketing area, and covers the use of geothermal energy for both electric power generation and direct applications. Economic, institutional, environmental, and other factors are discussed, and the benefits of the geothermal energy resource are described.

  18. Geothermal reservoirs - A brief review

    OpenAIRE

    Ganguly, Sayantan; Kumar, Mohan MS

    2012-01-01

    A brief discussion and review of the geothermal reservoir systems, geothermal energy and modeling and simulation of the geothermal reservoirs has been presented here. Different types of geothermal reservoirs and their governing equations have been discussed first. The conceptual and numerical modeling along with the representation of flow though fractured media, some issues related to non isothermal flow through fractured media, the efficiency of the geothermal reservoir, structure of the num...

  19. Geothermal technoecosystems and water cycles in arid lands. Information paper

    Energy Technology Data Exchange (ETDEWEB)

    Duffield, C.

    1976-01-01

    Arid lands resource information paper No. 2, 'Exploration and Exploitation of Geothermal Resources in Arid and Semiarid Lands,' first issued in 1973, is now out-of-print. The intent of the present paper was to revise that earlier literature review with its annotated bibliography, by recognizing the unusual developments in this field in the interim, with new geothermal fields discovered, new demands for geothermal energy as an alternative source to more conventional sources, and a number of new publications reflecting accelerated research. The extensive bibliography accompanying this paper was produced by ALIS, and includes over one hundred references prepared by the Office of Arid Lands Studies.

  20. Galerkin finite-element simulation of a geothermal reservoir

    Science.gov (United States)

    Mercer, J.W., Jr.; Pinder, G.F.

    1973-01-01

    The equations describing fluid flow and energy transport in a porous medium can be used to formulate a mathematical model capable of simulating the transient response of a hot-water geothermal reservoir. The resulting equations can be solved accurately and efficiently using a numerical scheme which combines the finite element approach with the Galerkin method of approximation. Application of this numerical model to the Wairakei geothermal field demonstrates that hot-water geothermal fields can be simulated using numerical techniques currently available and under development. ?? 1973.

  1. High-resolution seismic studies applied to injected geothermal fluids

    Energy Technology Data Exchange (ETDEWEB)

    Smith, A.T.; Kasameyer, P.

    1985-01-01

    The application of high-resolution microseismicity studies to the problem of monitoring injected fluids is one component of the Geothermal Injection Monitoring Project at LLNL. The evaluation of microseismicity includes the development of field techniques, and the acquisition and processing of events during the initial development of a geothermal field. To achieve a specific detection threshold and location precision, design criteria are presented for seismic networks. An analysis of a small swarm near Mammoth Lakes, California, demonstrates these relationships and the usefulness of high-resolution seismic studies. A small network is currently monitoring the Mammoth-Pacific geothermal power plant at Casa Diablo as it begins production.

  2. The Developing Field of Geothermal Energy Le développement du domaine de l'énergie géothermique

    Directory of Open Access Journals (Sweden)

    Bresee J. C.

    2006-11-01

    Full Text Available Geothermal energy is a rapidly growing source of power and heat in many countries of the world: production of electricity is generally confined to the most scismically active areas of the world; non electric uses are found throughout the earth. A cooperative program (CCMS was organized in 1973 under the auspices of the Committee on the Challenges of Modern Society (CCMS of the NATO with which non NATO countries could participate. This program included computer, based information systems, direct uses of geothermal energy, multipurpose processing and disposal of geothermai brines, small geothermal power plants, and hot dry rocks concepts. Several of the CCMS cooperative efforts were continued under the auspices of the International Energy Agency, often by way of bilateral agreements. Hot dry rock activities are diversified with funding from several nations. The US Geothermal program has expanded greatly in the last five years with the target to reach a geothermal energy production of 4 to 9 x 10. 15 Btu/yr at the end of the Twentieth Century, about half coming from geopressured methane. Dans de nombreux pays, la géothermie croît rapidement comme source d'énergie et de chaleur. La production d'électricité se cantonne dans les régions fortement sismiques, tandis que les usages non électriques sont répandus largement à la surface de la Terre. Un programme de coopération (CCMS s'est organisé en 1973 pour cinq ans sous les auspices du Comité pour le Défi de la Société Moderne de l'OTAN auquel pouvaient s'associer des nations qui ne sont pas membres du traité. Le programme comprenait : un système de documentation par ordinateurs, l'utilisation directe de l'énergie géothermique, le traitement diversifié et l'élimination des saumures géo-thermiques, de petites centrales géothermiques et l'étude des procédés par roches chaudes sèches. Plusieurs des efforts coopératifs du CCMS se sont poursuivis sous les auspices de l

  3. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1992-01-31

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  4. Estimation of a stress field in the earth`s crust using drilling-induced tensile fractures observed at well WD-1 in the Kakkonda geothermal field; Kakkonda WD-1 sei de kansokusareta drilling induced tensile fracture ni yoru chikaku oryokuba no suitei

    Energy Technology Data Exchange (ETDEWEB)

    Okabe, T. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Hayashi, K. [Tohoku Univ., Sendai (Japan). Inst. of Fluid Science; Kato, O.; Doi, N.; Miyazaki, S. [Japan Metals and Chemicals Co. Ltd., Tokyo (Japan); Uchida, T. [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

    1997-05-27

    This paper describes estimation of a stress field in the earth`s crust in the Kakkonda geothermal field. Formation micro imager (FMI) logging known as a crack detecting logging was performed in the well WD-1. This FMI logging has made observation possible on cracks along well axis thought to indicate size and direction of the crust stress, and drilling-induced tensile fractures (DTF). It was verified that these DTFs are generated initially in an azimuth determined by in-situ stress (an angle up to the DTF as measured counterclockwise with due north as a starting point, expressed in {theta}) in the well`s circumferential direction. It was also confirmed that a large number of cracks incline at a certain angle to the well axis (an angle made by the well axis and the DTF, expressed in {gamma}). The DTF is a crack initially generated on well walls as a result of such tensile stresses as mud pressure and thermal stress acting on the well walls during well excavation, caused by the in-situ stress field. Measurement was made on the {theta} and {gamma} from the FMI logging result, and estimation was given on a three-dimensional stress field. Elucidating the three-dimensional crust stress field in a geothermal reservoir is important in making clear the formation mechanism thereof and the growth of water-permeable cracks. This method can be regarded as an effective method. 9 refs., 8 figs., 1 tab.

  5. Sixteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1991-01-25

    The Sixteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23-25, 1991. The Workshop Banquet Speaker was Dr. Mohinder Gulati of UNOCAL Geothermal. Dr. Gulati gave an inspiring talk on the impact of numerical simulation on development of geothermal energy both in The Geysers and the Philippines. Dr. Gulati was the first recipient of The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy. Dr. Frank Miller presented the award. The registered attendance figure of one hundred fifteen participants was up slightly from last year. There were seven foreign countries represented: Iceland, Italy, Philippines, Kenya, the United Kingdom, Mexico, and Japan. As last year, papers on about a dozen geothermal fields outside the United States were presented. There were thirty-six papers presented at the Workshop, and two papers were submitted for publication only. Attendees were welcomed by Dr. Khalid Aziz, Chairman of the Petroleum Engineering Department at Stanford. Opening remarks were presented by Dr. Roland Horne, followed by a discussion of the California Energy Commission's Geothermal Activities by Barbara Crowley, Vice Chairman; and J.E. ''Ted'' Mock's presentation of the DOE Geothermal Program: New Emphasis on Industrial Participation. Technical papers were organized in twelve sessions concerning: hot dry rock, geochemistry, tracer injection, field performance, modeling, and chemistry/gas. As in previous workshops, session chairpersons made major contributions to the program. Special thanks are due to Joel Renner, Jeff Tester, Jim Combs, Kathy Enedy, Elwood Baldwin, Sabodh Garg, Marcel0 Lippman, John Counsil, and Eduardo Iglesias. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Angharad Jones, Rosalee Benelli, Jeanne Mankinen, Ted Sumida, and Terri A. Ramey who also

  6. Geothermal: surface geothermal, low temperature geothermal, high temperature geothermal, stimulation-based high temperature geothermal

    International Nuclear Information System (INIS)

    For the different geothermal energy technologies (as a whole, surface, low temperature, high temperature, and stimulated high temperature), this document proposes: brief definitions and descriptions of principle and operation, challenges and stakes regarding energy production, major actors in the World in terms of installed power and in France in terms of committed organisations, measurement units and key figures, typical locations, past and present exploitation, and future perspectives. Thus technologies like heat pumps or Canadian well among others, their strengths and weaknesses, and their use in electricity production are evoked

  7. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-01-01

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  8. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-12-31

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  9. Federal Geothermal Research Program Update Fiscal Year 1998

    Energy Technology Data Exchange (ETDEWEB)

    Keller, J.G.

    1999-05-01

    This report reviews the specific objectives, status, and accomplishments of DOE's Geothermal Research Program for Fiscal Year 1998. The Exploration Technology research area focuses on developing instruments and techniques to discover hidden hydrothermal systems and to expose the deep portions of known systems. The Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal and hot dry rock reservoirs. The Drilling Technology projects focus on developing improved, economic drilling and completion technology for geothermal wells. The Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Direct use research covers the direct use of geothermal energy sources for applications in other than electrical production.

  10. Geothermal Frontier: Penetrate a boundary between hydrothermal convection and heat conduction zones to create 'Beyond Brittle Geothermal Reservoir'

    Science.gov (United States)

    Tsuchiya, N.; Asanuma, H.; Sakaguchi, K.; Okamoto, A.; Hirano, N.; Watanabe, N.; Kizaki, A.

    2013-12-01

    EGS has been highlightened as a most promising method of geothermal development recently because of applicability to sites which have been considered to be unsuitable for geothermal development. Meanwhile, some critical problems have been experimentally identified, such as low recovery of injected water, difficulties to establish universal design/development methodology, and occurrence of large induced seismicity. Future geothermal target is supercritical and superheated geothermal fluids in and around ductile rock bodies under high temperatures. Ductile regime which is estimated beyond brittle zone is target region for future geothermal development due to high enthalpy fluids and relatively weak water-rock interaction. It is very difficult to determine exact depth of Brittle-Ductile boundary due to strong dependence of temperature (geotherm) and strain rate, however, ductile zone is considered to be developed above 400C and below 3 km in geothermal fields in Tohoku District. Hydrothermal experiments associated with additional advanced technology will be conducting to understand ';Beyond brittle World' and to develop deeper and hotter geothermal reservoir. We propose a new concept of the engineered geothermal development where reservoirs are created in ductile basement, expecting the following advantages: (a)simpler design and control the reservoir, (b)nearly full recovery of injected water, (c)sustainable production, (d)cost reduction by development of relatively shallower ductile zone in compression tectonic zones, (e)large quantity of energy extraction from widely distributed ductile zones, (f)establishment of universal and conceptual design/development methodology, and (g) suppression of felt earthquakes from/around the reservoirs. In ductile regime, Mesh-like fracture cloud has great potential for heat extraction between injection and production wells in spite of single and simple mega-fracture. Based on field observation and high performance hydrothermal

  11. Spatio-temporal evolution of anthropogenic deformation around Cerro Prieto geothermal field in the Mexicali Valley, B.C., Mexico, between 1993 and 2009 from DInSAR and leveling.

    Science.gov (United States)

    Sarychikhina, Olga; Glowacka, Ewa; Robles, Braulio; Mojarro, Jose

    2014-05-01

    Land subsidence is an environmental hazard which could be caused by withdrawal of large amounts of fluid from beneath the earth's surface. Land subsidence is an issue in several geothermal fields worldwide (e.g., Geysers, USA (Mossop and Segall, 1997), Wairakei-Tauhara, New Zealand (Allis et al., 2009)). Cerro Prieto geothermal field (CPGF), located in the Mexicali Valley, northwest Mexico, is the oldest and largest Mexican geothermal field in operation and has been producing electricity since 1973. The large amount of geothermal fluids extracted to supply steam to the power plants has resulted in considerable deformation in and around the field (e.g. Glowacka et al., 1996, 1999; Carnec and Fabriol, 1999; Sarychikhina et al., 2011). The deformation includes land subsidence and related ground fissuring and faulting. These phenomena have produced severe damages to the local infrastructure such as roads, irrigation canals and other facilities. Detection of land subsidence and monitoring of the spatial and temporal changes of its pattern and magnitude can provide important information about the dynamics of this process and controlling geological structures. The technique of Differential Synthetic Aperture Radar Interferometry (DInSAR) has been demonstrated to be a very effective technique for measuring ground deformation. This study presents an application of DInSAR interferogram stacking technique to investigate the land subsidence in the Mexicali Valley near CPGF. C-band ENVISAR ASAR images acquired between 2003 and 2009 from the ascending (track 306, frame 639) and descending track (track 84, frame 2961), obtained from the European Space Agency (ESA), as part of ESA CAT-1 project (ID - C1P3508), were used. Gamma ISP and DIFF/GEO software packages were used to calculate differential interferograms from SLC data and for differential interferograms stacking (Wegmüller and Werner, 1997). Eight average annual deformation rate maps were generated for 2005 (descending

  12. Global geothermal energy scenario

    International Nuclear Information System (INIS)

    To resolve the energy crisis efforts have been made in exploring and utilizing nonconventional energy resources since last few decades. Geothermal energy is one such energy resource. Fossil fuels are the earth's energy capital like money deposited in bank years ago. The energy to build this energy came mainly from the sun. Steam geysers and hot water springs are other manifestations of geothermal energy. Most of the 17 countries that today harness geothermal energy have simply tapped such resources where they occur. (author). 8 refs., 4 tabs., 1 fig

  13. Navy Geothermal Plan

    Energy Technology Data Exchange (ETDEWEB)

    1984-12-01

    Domestic geothermal resources with the potential for decreasing fossil fuel use and energy cost exist at a significant number of Navy facilities. The Geothermal Plan is part of the Navy Energy R and D Program that will evaluate Navy sites and provide a technical, economic, and environmental base for subsequent resource use. One purpose of the program will be to provide for the transition of R and D funded exploratory efforts into the resource development phase. Individual Navy geothermal site projects are described as well as the organizational structure and Navy decision network. 2 figs.

  14. Geothermal Program Review VII: proceedings. DOE Research and Development for the Geothermal Marketplace

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    Each year the Geothermal Technology Division of the US Department of Energy conducts an indepth review of its entire geothermal R and D program. The 2--3 day conference serves several purposes: a status report on current R and D activities, an assessment of progress and problems, a review of management issues, and a technology transfer opportunity between DOE and the US geothermal industry. This year's conference, Program Review 7, was held in San Francisco on March 21--23, 1989. As indicated by its title, ''DOE Research and Development for the Geothermal Marketplace'', Program Review 7 emphasized developing technologies, concepts, and innovations having potential for commercial application in the foreseeable future. Program Review 7 was comprised of eight sessions including an opening session and a special presentation on the ''Role of Geothermal Energy in Minimizing Global Environmental Problems.'' The five technical sessions covered GTD-sponsored R and D in the areas of hydrothermal (two sessions), hot dry rock, geopressured, and magma. Presentations were made by the relevant field researchers, and sessions were chaired by the appropriate DOE Operations Office Geothermal Program Manager. The technical papers and commentary of invited speakers contained in these Proceedings have been compiled in the order in which they were presented at Program Review 7.

  15. Assessment of geothermal development in Puna, Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Kamins, R.M.; Tinning, K.J.

    1977-01-01

    The following subjects are discussed: the district of Puna prior to geothermal development, socioeconomic conditions, alternative modes of geothermal development, social benefits and costs of geothermal development, and geothermal development policy and its direction. (MHR)

  16. BIOCHEMICAL PROCESSES FOR GEOTHERMAL BRINE TREATMENT

    Energy Technology Data Exchange (ETDEWEB)

    PREMUZIC,E.T.; LIN,M.S.; BOHENEK,M.; JOSHI-TOPE,G.; ZHOU,W.; SHELENKOVA,L.; WILKE,R.

    1998-09-20

    As part of the DOE Geothermal Energy Program, BNL's Advanced Biochemical Processes for Geothermal Brines (ABPGB) project is aimed at the development of cost-efficient and environmentally acceptable technologies for the disposal of geothermal wastes. Extensive chemical studies of high and low salinity brines and precipitates have indicated that in addition to trace quantities of regulated substances, e.g., toxic metals such as arsenic and mercury, there are significant concentrations of valuable metals, including gold, silver and platinum. Further chemical and physical studies of the silica product have also shown that the produced silica is a valuable material with commercial potential. A combined biochemical and chemical technology is being developed which (1) solubilizes, separates, and removes environmentally regulated constituents in geothermal precipitates and brines (2) generates an amorphous silica product which may be used as feedstock for the production of revenue generating materials, (3) recover economically valuable trace metals and salts. Geothermal power resources which utilize low salinity brines and use the Stretford process for hydrogen sulfide abatement generate a contaminated sulfur cake. Combined technology converts such sulfur to a commercial grade sulfur, suitable for agricultural use. The R and D activities at BNL are conducted jointly with industrial parties in an effort focused on field applications.

  17. Biochemical processes for geothermal brine treatment

    Energy Technology Data Exchange (ETDEWEB)

    Premuzic, E.T.; Lin, M.S.; Bohenek, M.; Joshi-Tope, G.; Zhou, W.; Shelenkova, L.; Wilke, R.

    1998-08-01

    As part of the DOE Geothermal Energy Program, BNL`s Advanced Biochemical Processes for Geothermal Brines (ABPGB) project is aimed at the development of cost-efficient and environmentally acceptable technologies for the disposal of geothermal wastes. Extensive chemical studies of high and low salinity brines and precipitates have indicated that in addition to trace quantities of regulated substances, e.g., toxic metals such as arsenic and mercury, there are significant concentrations of valuable metals, including gold, silver and platinum. Further chemical and physical studies of the silica product have also shown that the produced silica is a valuable material with commercial potential. A combined biochemical and chemical technology is being developed which (1) solubilizes, separates, and removes environmentally regulated constituents in geothermal precipitates and brines, (2) generates an amorphous silica product which may be used as feedstock for the production of revenue generating materials, (3) recover economically valuable trace metals and salts. Geothermal power resources which utilize low salinity brines and use the Stretford process for hydrogen sulfide abatement generate a contaminated sulfur cake. Combined technology converts such sulfur to a commercial grade sulfur, suitable for agricultural use. The R and D activities at BNL are conducted jointly with industrial parties in an effort focused on field applications.

  18. Drilling of bilateral wells: analysis and selection of wells in the Los Humeros, Pue., geothermal field; Perforacion de pozos bilaterales: analisis y seleccion de pozos en el campo geotermico de Los Humeros, Pue.

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly del Carmen; Ramirez Montes, Miguel [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: miguel.ramirez02@cfe.gob.mx

    2010-01-15

    Drilling bilateral geothermal wells has been conducted successfully in fields in the U.S., the Philippines and Japan, among other places. The reason for drilling a second leg in a well is to increase production by penetrating additional production zones. In this report, criteria are presented for selecting wells in Los Humeros, Pue., geothermal field to be considered for a second leg, taking into account the mechanical condition of the wells, geological targets, distances between wells, production characteristics and thermodynamic conditions. The cases of wells H-3, H-8, H-11, H-16, H-33, H-34 and H-36, which have low production, were reviewed. Wells H-3, H-8 and H-34 were selected as the best subjects for bi-directional drilling. A design is proposed for constructing a second leg in well H-8. [Spanish] La perforacion de pozos bilaterales se ha venido realizando de manera exitosa en campos geotermicos de Estados Unidos, Filipinas y Japon, entre otros. El objetivo de perforar una segunda pierna en un mismo pozo es incrementar su produccion, ya que habran mas zonas de produccion. En este reporte se presentan los criterios para la seleccion de pozos del campo geotermico de Los Humeros, Pue., candidatos para una segunda pierna, considerando el estado mecanico de los mismos, los objetivos geologicos, la distancia entre pozos, sus caracteristicas de produccion y sus condiciones termodinamicas. Para ello se revisaron los casos de los pozos H-3, H-8, H-11, H-16, H-33, H-34 y H-36, que presentan una produccion baja. Posteriormente, aplicando los criterios de evaluacion y con la informacion obtenida de cada pozo, se seleccionaron los pozos H-3, H-8 y H-34 como los que presentan mejores condiciones para la perforacion bidireccional. Finalmente, se establecio un diseno para la construccion de una segunda pierna en el pozo H-8.

  19. Corrosion in pipelines and well casings at the Cerro Prieto geothermal field, BC; Corrosion en tuberias de linea y de revestimiento de pozos del campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Miranda Herrera, Carlos A.; Canchola Felix, Ismael; Raygoza Flores, Joaquin; Mora Perez, Othon [Comision Federal de Electricidad, Residencia General de Cerro Prieto, Mexicali, Baja California (Mexico)]. E-mail: carlos.miranda02@cfe.gob.mx

    2009-07-15

    In the area called Poligono Hidalgo, inside the Cerro Prieto IV zone in the Cerro Prieto geothermal field, BC, corrosion has occurred in the last few years on well casings and pipelines used for geothermal fluids. Corrosion test results are presented here for pipes, type API L-80 and ASTM A-53 grade B, which were subjected to condensate from wells 403 and 424. These wells have thrown corroded material from their respective casings. With these data we pinpoint corrosive conditions in this field area and determine which pipes are adequate to case wells in similar chemical, production conditions to minimize adverse effects and extend the life of the well, allowing more efficient exploitation of the deepest production zones in the reservoir. [Spanish] En el campo geotermico de Cerro Prieto, BC, dentro del area del Poligono Hidalgo en el sector conocido como Cerro Prieto IV, algunos pozos han presentado en los ultimos anos desgastes en sus tuberias de revestimiento y en las tuberias de linea para el transporte del fluido geotermico. Se presentan resultados de pruebas de corrosion con tuberias tipo API L-80 y ASTM A-53 grado B al ser sometidas al condensado de los pozos 403 y 424, los cuales han estado arrojando material de sus respectivas tuberias de revestimiento. Con estos datos se pretende conocer las condiciones corrosivas de esa zona del campo y determinar cual seria la tuberia ideal a utilizar en pozos con condiciones quimicas de produccion semejantes a fin de minimizar este efecto adverso y prolongar la vida de los pozos, a la vez que se permita la explotacion eficiente de las zonas productoras mas profundas del yacimiento.

  20. Geopressured geothermal bibliography. Volume 1 (citation extracts)

    Energy Technology Data Exchange (ETDEWEB)

    Hill, T.R.; Sepehrnoori, K.

    1981-08-01

    This bibliography was compiled by the Center for Energy Studies at The University of Texas at Austin to serve as a tool for researchers in the field of geopressured geothermal energy resources. The bibliography represents citations of papers on geopressured geothermal energy resources over the past eighteen years. Topics covered in the bibliography range from the technical aspects of geopressured geothermal reservoirs to social, environmental, and legal aspects of tapping those reservoirs for their energy resources. The bibliography currently contains more than 750 entries. For quick reference to a given topic, the citations are indexed into five divisions: author, category, conference title, descriptor, and sponsor. These indexes are arranged alphabetically and cross-referenced by page number.

  1. Federal Geothermal Research Program Update Fiscal Year 2000; ANNUAL

    International Nuclear Information System (INIS)

    The Department of Energy's Geothermal Program serves two broad purposes: (1) to assist industry in overcoming near-term barriers by conducting cost-shared research and field verification that allows geothermal energy to compete in today's aggressive energy markets; and (2) to undertake fundamental research with potentially large economic payoffs. The four categories of work used to distinguish the research activities of the Geothermal Program during FY 2000 reflect the main components of real-world geothermal projects. These categories form the main sections of the project descriptions in this Research Update. Exploration Technology research focuses on developing instruments and techniques to discover hidden hydrothermal systems and to explore the deep portions of known systems. Research in geophysical and geochemical methods is expected to yield increased knowledge of hidden geothermal systems. Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal reservoirs and enhanced geothermal systems. Research in various reservoir analysis techniques is generating a wide range of information that facilitates development of improved reservoir management tools. Drilling Technology focuses on developing improved, economic drilling and completion technology for geothermal wells. Ongoing research to avert lost circulation episodes in geothermal drilling is yielding positive results. Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Increased output and improved performance of binary cycles will result from investigations in heat cycle research

  2. Federal Geothermal Research Program Update Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    Renner, J.L.

    2001-08-15

    The Department of Energy's Geothermal Program serves two broad purposes: (1) to assist industry in overcoming near-term barriers by conducting cost-shared research and field verification that allows geothermal energy to compete in today's aggressive energy markets; and (2) to undertake fundamental research with potentially large economic payoffs. The four categories of work used to distinguish the research activities of the Geothermal Program during FY 2000 reflect the main components of real-world geothermal projects. These categories form the main sections of the project descriptions in this Research Update. Exploration Technology research focuses on developing instruments and techniques to discover hidden hydrothermal systems and to explore the deep portions of known systems. Research in geophysical and geochemical methods is expected to yield increased knowledge of hidden geothermal systems. Reservoir Technology research combines laboratory and analytical investigations with equipment development and field testing to establish practical tools for resource development and management for both hydrothermal reservoirs and enhanced geothermal systems. Research in various reservoir analysis techniques is generating a wide range of information that facilitates development of improved reservoir management tools. Drilling Technology focuses on developing improved, economic drilling and completion technology for geothermal wells. Ongoing research to avert lost circulation episodes in geothermal drilling is yielding positive results. Conversion Technology research focuses on reducing costs and improving binary conversion cycle efficiency, to permit greater use of the more abundant moderate-temperature geothermal resource, and on the development of materials that will improve the operating characteristics of many types of geothermal energy equipment. Increased output and improved performance of binary cycles will result from investigations in heat cycle research.

  3. Geothermal energy utilization in the United States - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.; Boyd, Tonya L.; Sifford, Alex; Bloomquist, R. Gordon

    2000-01-01

    Geothermal energy is used for electric power generation and direct utilization in the United States. The present installed capacity for electric power generation is 3,064 MWe with only 2,212 MWe in operation due to reduction at The Geysers geothermal field in California; producing approximately16,000 GWh per year. Geothermal electric power plants are located in California, Nevada, Utah and Hawaii. The two largest concentrations of plants are at The Geysers in northern California and the Imperial Valley in southern California. The direct utilization of geothermal energy includes the heating of pools and spas, greenhouses and aquaculture facilities, space heating and district heating, snow melting, agricultural drying, industrial applications and ground-source heat pumps. The installed capacity is 4,000 MWt and the annual energy use is 20,600 billion Btu (21,700 TJ - 6040 GWh). The largest applications is groundsource (geothermal) heat pumps (59% of the energy use), and the largest direct-use is in aquaculture. Direct utilization is increasing at about six percent per year; whereas, electric power plant development is almost static. Geothermal energy is a relatively benign energy source, displaying fossil fuels and thus, reducing greenhouse gas emissions. A recent initiative by the U.S. Department of Energy, “Geo-Powering the West,” should stimulate future geothermal development. The proposal is especially oriented to small-scale power plants with cascaded uses of the geothermal fluid for direct applications.

  4. Geothermal Energy Utilization in the United States - 2000

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.; Boyd, Tonya L (Geo-Heat Center, Oregon Institute of Technology, Klamath Falls, OR); Sifford, Alex (Sifford Energy Services, Neskowin, OR); Bloomquist, R. Gordon (Washington State University Energy Program, Olympia, WA)

    2000-01-01

    Geothermal energy is used for electric power generation and direct utilization in the United States. The present installed capacity for electric power generation is 3,064 MWe with only 2,212 MWe in operation due to reduction at The Geysers geothermal field in California; producing approximately16,000 GWh per year. Geothermal electric power plants are located in California, Nevada, Utah and Hawaii. The two largest concentrations of plants are at The Geysers in northern California and the Imperial Valley in southern California. The direct utilization of geothermal energy includes the heating of pools and spas, greenhouses and aquaculture facilities, space heating and district heating, snow melting, agricultural drying, industrial applications and ground-source heat pumps. The installed capacity is 4,000 MWt and the annual energy use is 20,600 billion Btu (21,700 TJ - 6040 GWh). The largest applications is groundsource (geothermal) heat pumps (59% of the energy use), and the largest direct-use is in aquaculture. Direct utilization is increasing at about six percent per year; whereas, electric power plant development is almost static. Geothermal energy is a relatively benign energy source, displaying fossil fuels and thus, reducing greenhouse gas emissions. A recent initiative by the U.S. Department of Energy, “Geo-Powering the West,” should stimulate future geothermal development. The proposal is especially oriented to small-scale power plants with cascaded uses of the geothermal fluid for direct applications.

  5. Understanding the circulation of geothermal waters in the Tibetan Plateau using oxygen and hydrogen stable isotopes

    International Nuclear Information System (INIS)

    Highlights: • Unique geothermal resources in Tibetan Plateau were discussed. • Isotopes were used to trace circulation of geothermal water. • Magmatic water mixing dominates geothermal water evolution. - Abstract: With the uplift of the Tibetan Plateau, many of the world’s rarest and most unique geothermal fields have been developed. This study aims to systematically analyze the characteristics of the hydrogen and oxygen isotopic data of geothermal, river, and lake waters to understand the circulation of groundwater and to uncover the mechanism of geothermal formation in the Tibetan Plateau. Field observations and isotopic data show that geothermal water has higher temperatures and hydraulic pressures, as well as more depleted D and 18O isotopic compositions than river and lake waters. Thus, neither lakes nor those larger river waters are the recharge source of geothermal water. Snow-melt water in high mountains can vertically infiltrate and deeply circulate along some stretching tensile active tectonic belts or sutures and recharge geothermal water. After deep circulation, cold surface water evolves into high-temperature thermal water and is then discharged as springs at the surface again in a low area, under high water-head difference and cold–hot water density difference. Therefore, the large-scale, high-temperature, high-hydraulic-pressure geothermal systems in the Tibetan Plateau are developed and maintained by rapid groundwater circulation and the heat source of upwelled residual magmatic water. Inevitably, the amount of geothermal water will increase if global warming accelerates the melting of glaciers in high mountains

  6. ¿Plagió José Arévalo Baca el libro “Aves de España” (1887) de un manuscrito ornitológico de Rafael Cisternas?

    OpenAIRE

    Reig Ferrer, Abilio

    2014-01-01

    Una sospecha de usurpación y plagio se cierne sobre el libro de José Arévalo Baca Aves de España (1887). Una carta en 1893 de Mariano de la Paz Graells a Víctor López Seoane es un documento probatorio de que Arévalo Baca robó a la viuda de Cisternas un manuscrito y lo utilizó apropiándoselo para la redacción del considerado primer libro español de ornitología ibérica. Además de mostrar aquí esta prueba, se presentan otros indicios y evidencias que hemos podido reunir para fundamentar la sospe...

  7. Time-lapse Joint Inversion of Geophysical Data and its Applications to Geothermal Prospecting - GEODE

    Energy Technology Data Exchange (ETDEWEB)

    Revil, Andre [Univ. of Savoy, Chambery (France)

    2015-12-31

    The objectives of this project were to develop new algorithms to decrease the cost of drilling for geothermal targets during the exploration phase of a hydrothermal field and to improve the monitoring of a geothermal field to better understand its plumbing system and keep the resource renewable. We developed both new software and algorithms for geothermal explorations (that can also be used in other areas of interest to the DOE) and we applied the methods to a geothermal field of interest to ORMAT in Nevada.

  8. Pumpernickel Valley Geothermal Project Thermal Gradient Wells

    Energy Technology Data Exchange (ETDEWEB)

    Z. Adam Szybinski

    2006-01-01

    The Pumpernickel Valley geothermal project area is located near the eastern edge of the Sonoma Range and is positioned within the structurally complex Winnemucca fold and thrust belt of north-central Nevada. A series of approximately north-northeast-striking faults related to the Basin and Range tectonics are superimposed on the earlier structures within the project area, and are responsible for the final overall geometry and distribution of the pre-existing structural features on the property. Two of these faults, the Pumpernickel Valley fault and Edna Mountain fault, are range-bounding and display numerous characteristics typical of strike-slip fault systems. These characteristics, when combined with geophysical data from Shore (2005), indicate the presence of a pull-apart basin, formed within the releasing bend of the Pumpernickel Valley – Edna Mountain fault system. A substantial body of evidence exists, in the form of available geothermal, geological and geophysical information, to suggest that the property and the pull-apart basin host a structurally controlled, extensive geothermal field. The most evident manifestations of the geothermal activity in the valley are two areas with hot springs, seepages, and wet ground/vegetation anomalies near the Pumpernickel Valley fault, which indicate that the fault focuses the fluid up-flow. There has not been any geothermal production from the Pumpernickel Valley area, but it was the focus of a limited exploration effort by Magma Power Company. In 1974, the company drilled one exploration/temperature gradient borehole east of the Pumpernickel Valley fault and recorded a thermal gradient of 160oC/km. The 1982 temperature data from five unrelated mineral exploration holes to the north of the Magma well indicated geothermal gradients in a range from 66 to 249oC/km for wells west of the fault, and ~283oC/km in a well next to the fault. In 2005, Nevada Geothermal Power Company drilled four geothermal gradient wells, PVTG-1

  9. Geothermics in Aquitaine

    International Nuclear Information System (INIS)

    The geothermal exploitation of the Aquitanian Basin (S W France) started 15 years ago and has extended today to 12 different places. Three main aquifers of different depth are exploited in Bordeaux region: the old alluvial deposits of Garonne river (20-30 m), the Middle Eocene aquifer (300-400 m), and the Cenomanian-Turonian aquifer (900-1100 m) which is the deepest and most exploited for geothermal purposes. The drinkable quality of the water and the use of single-well technique are important factors that reduce the operating costs. Geothermics remains competitive with other energy sources due to the long-term stability of geothermal energy costs. (J.S.). 2 figs., 1 tab., 5 photos

  10. Geothermal Orientation Handbook

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-07-01

    This is a useful overview of the Department of Energy's outlook on geothermal energy development in the U.S. as of late 1983. For example, Exhibit 4 shows how electric utility planners' estimates of likely amounts of geothermal power on line for 1990 and 2000 first increased and then declined over time as they were surveyed in 1977 through 1983 (date are from the EPRI Survey). Additions to direct heat uses in 1979 through 1981 are in Exhibit 7. A Table (not numbered) at the back of the report "Historical Development of Geothermal Power ..." shows world installed geothermal capacity by nation at decadal intervals from 1950 to 1980, and the first year of power production for each country. (DJE 2005)

  11. GEOTHERMAL EFFLUENT SAMPLING WORKSHOP

    Science.gov (United States)

    This report outlines the major recommendations resulting from a workshop to identify gaps in existing geothermal effluent sampling methodologies, define needed research to fill those gaps, and recommend strategies to lead to a standardized sampling methodology.

  12. Geothermal Energy: Current abstracts

    Energy Technology Data Exchange (ETDEWEB)

    Ringe, A.C. (ed.)

    1988-02-01

    This bulletin announces the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production. (ACR)

  13. NGDC Geothermal Data Bases

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Geothermics is the study of heat generated in Earth's interior and its manifestation at the surface. The National Geophysical Data Center (NGDC) has a variety of...

  14. Gravimetry. A potential field method in the geothermal exploration. Wavelet-based field transformation for the detection of interfaces; Gravimetrie. Eine Potentialfeld-Methode in der geothermischen Exploration. Wavelet basierte Feldtransformation zur Detektion von Grenzflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Geiermann, Johannes; Koch, Steffen; Deckert, Hagen [Univ. of Applied Sciences, Bingen (Germany). Inst. fuer geothermisches Ressourcenmanagement; Horowitz, Franklin G. [Western Australia Univ., Crawley, WA (Australia). WAGCOE

    2011-10-24

    The question of the geologically favorable nature of the deep subsurface is connected to the economic interest in high fluid flow rates for geothermal power production directly. Thus, the search for fault zones (areas at which a pronounced fissuring can be expected) takes into account a special priority in the geothermal exploration. The authors of the contribution under consideration present the results of a gravimetric measurement campaign which was performed in order to determine the information gaps between the profiles of the 2-D seismic. The use of a wavelet-based analysis method for the detection of multiscale interfaces proved to be particularly profitable. Some identified structures could to be confirmed while some new structures could be explored. In light of the simple and cost-efficient feasibility, the authors recommend a gravimetric exploration as standard already in front of a 2D seismic in order to obtain important information for planning of the 2D seismic.

  15. Geothermal Energy Retrofit

    Energy Technology Data Exchange (ETDEWEB)

    Bachman, Gary

    2015-07-28

    The Cleary University Geothermal Energy Retrofit project involved: 1. A thermal conductivity test; 2. Assessment of alternative horizontal and vertical ground heat exchanger options; 3. System design; 4. Asphalt was stripped from adjacent parking areas and a vertical geothermal ground heat exchanger system installed; 5. the ground heat exchanger was connected to building; 6. a system including 18 heat pumps, control systems, a manifold and pumps, piping for fluid transfer and ductwork for conditioned air were installed throughout the building.

  16. Geothermal environmental impact

    International Nuclear Information System (INIS)

    Geothermal utilization can cause surface disturbances, physical effects due to fluid withdrawal noise, thermal effects and emission of chemicals as well as affect the communities concerned socially and economically. The environmental impact can be minimized by multiple use of the energy source and the reinjection of spent fluids. The emission of greenhouse gases to the atmosphere can be substantially reduced by substituting geothermal energy for fossil fuels as an industrial energy source wherever possible

  17. Renewable Energy Essentials: Geothermal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Geothermal energy is energy available as heat contained in or discharged from the earth's crust that can be used for generating electricity and providing direct heat for numerous applications such as: space and district heating; water heating; aquaculture; horticulture; and industrial processes. In addition, the use of energy extracted from the constant temperatures of the earth at shallow depth by means of ground source heat pumps (GSHP) is also generally referred to as geothermal energy.

  18. Imperial County geothermal development semi-annual report, October 1, 1980-March 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The current geothermal progress in Imperial County is reported. Three areas are reported: Geothermal Administration, Geothermal Planning, and other Geothermal Activities. Geothermal Administration addresses the status of the Imperial Valley Environmental Project (IVEP) transfer, update of the Geothermal Resource Center, and findings of Geothermal field inspections. In addition, the cooperative efforts between industry and the County; Master EIR for the Salton Sea KGRA and the resurveying of the subsidence detection network are covered. Geothermal Planning addresses a Board of Supervisor action on the Union Oil Geothermal Production Permit for 16 wells in the Salton Sea KGRA and a permit for Southern California Edison 10 megawatts power plant in the Salton Sea KGRA. Planning Commission action covers: Amendment of Magma Power's 49 megawatts Geothermal Production Permit to 28 megawatt power plant and relocation of the plant and wells within the Salton Sea KGRA; Exploration permit to Occidental Geothermal for four exploratory wells in East Brawley; Geothermal Production Permit to Southern California Edison to operate a 10 megawatt power plant in the Salton Sea KGRA; and Geothermal production permit to Union Oil for 16 production-injection wells in the Salton Sea KGRA. Lastly, EIR exemptions to CEQA were granted to Chevron for 70 shallow temperature observation holes and Union for fifteen. Other Geothermal Activity addresses the County Direct Heat Development study; the solicitation for district heating and cooling proposals; the new Geothermal Class II-1 disposal site; the DOE Region IX meeting in Tucson; and USGA designating a new KGRA, the East Brawley KGRA, the Westmorland KGRA, and revising the southern border of the Salton Sea KGRA.

  19. Minimal thermodynamic conditions in the reservoir to produce steam at the Cerro Prieto geothermal field, BC; Condiciones termodinamicas minimas del yacimiento para producir vapor en el campo geotermico de Cerro Prieto, B.C.

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Rodriguez; Marco Helio [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia General de Cerro Prieto, Mexicali, Baja California (Mexico)]. E-mail: marco.rodriguez01@cfe.gob.mx

    2009-01-15

    Minimal thermodynamic conditions in the Cerro Prieto geothermal reservoir for steam production are defined, taking into account the minimal acceptable steam production at the surface, considering a rank of mixed-enthalpies for different well-depths, and allowing proper assessments for the impacts of the changes in fluid reservoir pressure and enthalpy. Factors able to influence steam production are discussed. They have to be considered when deciding whether or not to drill or repair a well in a particular area of the reservoir. These evaluations become much more relevant by considering the huge thermodynamic changes that have occurred at the Cerro Prieto geothermal reservoir from its development, starting in 1973, which has lead to abandoning some steam producing areas in the field. [Spanish] Las condiciones termodinamicas minimas del yacimiento geotermico de Cerro Prieto, BC, para producir vapor se determinan tomando en cuenta la minima produccion de vapor aceptable en superficie, considerando un rango de entalpias de la mezcla y para diferentes profundidades de pozos, lo que permite valorar adecuadamente el impacto de la evolucion de la presion y entalpia del fluido en el yacimiento. Se discuten los factores que pueden afectar la produccion de vapor, los cuales se deben tomar en cuenta para determinar la conveniencia o no de perforar o reparar un pozo en determinada zona del yacimiento. Estas evaluaciones adquieren gran relevancia al considerar los enormes cambios termodinamicos que ha presentado el yacimiento geotermico de Cerro Prieto, como resultado de su explotacion iniciada en 1973, lo que ha llevado a abandonar algunas zonas del campo para la produccion de vapor. Palabras Clave: Cerro Prieto, entalpia, evaluacion de yacimientos, politicas de explotacion, presion, produccion de vapor.

  20. The Geothermal Potential, Current and Opportunity in Taiwan

    Science.gov (United States)

    Song, Sheng-Rong

    2016-04-01

    Located in the west Pacific Rim of Fire, Taiwan possesses rich geothermal resources due to volcanic activities and rapid uplifting of plate collision. Based on available data prior to 1980, Taiwan may have about 1 GWe of potential shallow geothermal energy, which is less than 3% of the national gross power generation. A 3-Mw pilot power plant, therefore, was constructed in 1981 and terminated in 1993 in the Chingshui geothermal field of Ilan, northeastern Taiwan. Recently, one of the National Science & Technology Program (NSTP) projects has been conducting research and reevaluating the island-wide deep geothermal energy. Four hot potential sites have been recognized. They are: (1) Tatun Volcano Group of northern Taiwan; (2) I-Lan Plain of NE Taiwan; (3) Lu-Shan area of Central Taiwan; and (4) Hua-Tung area of eastern Taiwan. We found that the geothermal resource in Taiwan may be as high as 160 GWe, with 33.6 GWe of exploitable geothermal energy. There are no any commercial geothermal power plants until now in Taiwan, although the potential is great. However, geothermal energy has been listed as one of major tasks of National Energy Program, Phase II (NEP-II) in Taiwan. We will conduct more detailed geothermal energy surveys on some proposed hot sites and to construct an EGS pilot geothermal plant with 1 MWe capability in a few years. Currently, there are three nuclear power plants, named No. 1, 2 & 3, in operations, which produce 16.5% gross generation of electricity and one (No. 4) is under construction, but is stopped and sealed now in Taiwan. Furthermore, the life-span of 40-year operation for those three power plants will be close-at hand and retire in 2018-2019, 2021-2023 and 2024-2025, respectively. Therefore, to find alternative energy sources, especially on the clean, renewable and sustainable ones for generating electricity are emergent and important for Taiwan's government in next few years. Among various energy sources, geothermal energy can be as base

  1. Geological and production analyses focused on exploration of the eastern part of the Cerro Prieto geothermal field, BC; Analisis geologico-productivo enfocado a la exploracion de la parte oriental del campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar Dumas, Alvaro [Comision Federal de Electricidad, Residencia General de Cerro Prieto, B.C (Mexico)]. E-mail: alvaro.aguilar@cfe.gob.mx

    2008-01-15

    The eastern part of the Cerro Prieto geothermal field (CGCP), known as Poligono Nuevo Leon, is an area with proven geothermal resources, as confirmed by seven directional wells located toward the east and by vertical well M-200 located inside the polygon. Well M-200 was drilled in 1984 and has produced about 4 million tons of steam to date. It is integrated into the CP-2 sector, producing 68 t/h of steam. Presently the eastern part of CGCP, representing 25% of the total field area, is producing over half of the steam for the entire field. In the last few years, the steam has come only after increasing the number of production wells located in the eastern zone of CGCP (Rodriguez, 2006), where pressure, enthalpy and temperature conditions are better than in other parts of the field. However in the long term it will be necessary to incorporate Poligono Nuevo Leon into the productive area to expand the productive life of CGCP. This paper includes a geological analysis, plus models for steam production, temperature and enthalpy for Poligono Nuevo Leon. [Spanish] La parte oriental del Campo Geotermico de Cerro Prieto (CGCP), conocida como Poligono Nuevo Leon, representa una area potencial con recursos geotermicos comprobados, lo que demuestran siete pozos direccionales que se han perforado hacia el este, asi como el pozo vertical M-200, localizado dentro del poligono. El pozo M-200 se perforo en 1984 y ha producido a la fecha alrededor de 4 millones de toneladas de vapor, estando integrado al sector CP-2 una produccion de 68 t/h de vapor. Actualmente la parte oriental del CGCP, que representa el 25% del area total del campo, produce mas de la mitad del total de vapor del campo. El suministro de vapor en los ultimos anos se ha logrado cubrir aumentando el numero de pozos en operacion localizados en la zona oriente del CGCP (Rodriguez, 2006), ya que es aqui donde hay condiciones de presion, entalpia y temperatura del yacimiento que son mejores que en otras areas del campo

  2. Geothermal energy - a world overview

    International Nuclear Information System (INIS)

    The author looks at geothermal energy for district heating, electricity production and industrial processes;and provides data on installed capacity worldwide. He describes how present technology makes it possible to control satisfactorily the environmental impact of geothermal exploitation

  3. Geothermal energy and radiation protection

    International Nuclear Information System (INIS)

    The thermal ground waters used for geothermal energy production contain natural radionuclides. The thereby required radiation protection measures during the operation of a geothermal plant and at the disposal of the resulting radioactive residues are described. (orig.)

  4. Accelerating Geothermal Research (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-05-01

    Geothermal research at the National Renewable Energy Laboratory (NREL) is advancing geothermal technologies to increase renewable power production. Continuous and not dependent on weather, the geothermal resource has the potential to jump to more than 500 gigawatts in electricity production, which is equivalent to roughly half of the current U.S. capacity. Enhanced geothermal systems have a broad regional distribution in the United States, allowing the potential for development in many locations across the country.

  5. Use of slim holes for geothermal exploration and reservoir assesment: A preliminary report on Japanese experience

    Energy Technology Data Exchange (ETDEWEB)

    Garg, S.K.; Combs, J.

    1993-01-28

    The publicly available Japanese data on the use of slim holes in geothermal exploration and reservoir assessment are reviewed in this report. Slim holes have been used for (1) obtaining core for geological studies, (2) delineating the stratigraphic structure, (3) characterizing reservoir fluid state (pressure, temperature, etc.), and (4) defining the permeability structure for reservoir assessment. Examples of these uses of slim hole data are presented from the Hohi Geothermal Area and the Sumikawa Geothermal Field. Discharge data from slim holes and production wells from the Oguni Geothermal Field indicate that it may be possible to infer the discharge rate of production wells based on slim hole measurements.

  6. Formation of sulphation deposits in cables in the electricity generation plant of Los Humeros geothermal field, Mexico; Sulfatacion de cables en la central geotermoelectrica Los Humeros, Puebla, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Vergara Rangel, Agustin [Comision Federal de Electricidad, Perote, Veracruz (Mexico)

    2000-12-01

    In the construction of a central electrical generation plant using geothermal fluids, high quality standards are applied in all aspects of engineering. Los Humeros generation units were installed through trenches, ducts and trays according to norms for cables of control, force and power, specifically in point to point cables and connections. Performance of the power plant has been affected by electric momentary and sequence flaws due to problems of cable sulfating, which were solved by tinning the conductors. [Spanish] En la construccion de centrales generadoras de electricidad con fluidos geotermicos se aplican criterios de calidad de diseno en todos los aspectos de la ingenieria. En Los Humeros Puebla, se realizo la instalacion conforme a normas de cables de control, fuerza y potencia a traves de trincheras, ductos y charolas y especificamente en el cableado asi como en las conexiones de punta a punta. Todos estos aspectos son referidos a planos de los componentes y equipos electricos existentes en una central. Al paso del tiempo existieron fallas electricas momentaneas y secuenciales por el problema de sulfatacion en cables, los cuales fueron resueltos con el estanado de conductores.

  7. Proposal to neutralize acid fluids from wells in the Los Humeros, Pue., geothermal field; Propuesta para la neutralizacion de fluidos acidos provenientes de pozos del campo geotermico de Los Humeros, Pue.

    Energy Technology Data Exchange (ETDEWEB)

    Flores Armenta, Magaly del Carmen; Ramirez Montes, Miguel; Garcia Cuevas, Juan Manuel [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Morelia, Michoacan (Mexico)]. E-mail: magaly.flores@cfe.gob.mx

    2009-07-15

    Neutralizing an acidic fluid consists of adding a sodium hydroxide solution to neutralize the H group of acids, therefore increasing the pH. The injection of sodium hydroxide has to be continuous and at a proper depth inside the well to protect against the corrosion of casing and surface equipment. Neutralization is a common practice used in geothermal fields, such as at The Geysers in the US and Miravalles in Costa Rica-places where aggressive fluids cause problems for extracting and using geothermal fluids commercially. A zone surrounding wells H-4, H-16 and H-29 in the northern section of the Los Humeros, Pue., geothermal field, known as the Colapso Central, has shown evidence of aggressively acidic fluids. Several wells drilled in the area had to be repaired, thus plugging and isolating the deepest production zones. Well H-43 was drilled two years ago in the northern zone of the field, and even though it is not located in the aggressive-fluid zone, the well presents mineralogical features possibly indicating the presence of acidic fluids. Therefore, before producing this well it has been proposed we install a neutralization system with general characteristics presented in this paper. The system will prevent corrosion that up to now has prevented exploitation of the deep portion of Colapso Central, helping to develop the field in a more profitable way. [Spanish] Neutralizar un fluido acido consiste en agregarle una solucion de hidroxido de sodio. Esto neutraliza el grupo de acidos H y en consecuencia aumenta el pH. La inyeccion de hidroxido de sodio se realiza de manera continua y a una profundidad adecuada dentro del pozo para proteger a la tuberia y a todo el equipo superficial contra la corrosion. La neutralizacion es una practica comun que se viene realizando en campos como Los Geysers en Estados Unidos y en Miravalles, Costa Rica, donde la presencia de fluidos agresivos causa problemas en la extraccion y aprovechamiento del fluido geotermico con fines

  8. The significance of "geothermal microzonation" for the correct planning of low-grade source geothermal systems

    Science.gov (United States)

    Viccaro, Marco; Pezzino, Antonino; Belfiore, Giuseppe Maria; Campisano, Carlo

    2016-04-01

    Despite the environmental-friendly energy systems are solar thermal technologies, photovoltaic and wind power, other advantageous technologies exist, although they have not found wide development in countries such as Italy. Given the almost absent environmental impact and the rather favorable cost/benefit ratio, low-enthalpy geothermal systems are, however, likely to be of strategic importance also in Italy during the next years. The importance of geology for a sustainable exploitation of the ground through geothermal systems from low-grade sources is becoming paramount. Specifically, understanding of the lithological characteristics of the subsurface along with structures and textures of rocks is essential for a correct planning of the probe/geo-exchanger field and their associated ground source heat pumps. The complex geology of Eastern Sicily (Southern Italy), which includes volcanic, sedimentary and metamorphic units over limited extension, poses the question of how thermal conductivity of rocks is variable at the scale of restricted areas (even within the same municipality). This is the innovative concept of geothermal microzonation, i.e., how variable is the geothermal potential as a function of geology at the microscale. Some pilot areas have been therefore chosen to test how the geological features of the subsurface can influence the low-enthalpy geothermal potential of an area. Our geologically based evaluation and micro-zonation of the low-grade source geothermal potential of the selected areas have been verified to be fundamental for optimization of all the main components of a low-enthalpy geothermal system. Saving realization costs and limiting the energy consumption through correct sizing of the system are main ambitions to have sustainable development of this technology with intensive utilization of the subsurface. The variegated territory of countries such as Italy implies that these goals can be only reached if, primarily, the geological features

  9. ECONOMIC GEOLOGY (5)GEOTHERMICS GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>20082442 Han Zaisheng(China Geological Servey,Beijing 100011,China);Ran Weiyan Exploration and Evaluation of Shal- low Geothermal Energy(Geology in China, ISSN1000—3657,CN11—1167/P,34(6), 2007,p.1115—1121,6 refs.,with English abstract) Key words:geothermal exploration, geothermal resources

  10. Development of geothermal resources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This paper describes the geothermal development promotion survey project. NEDO is taking the lead in investigation and development to reduce risks for private business entities and promote their development. The program is being moved forward by dividing the surveys into three ranks of A, B and C from prospects of geothermal resource availability and the state of data accumulation. The survey A lacks number of data, but covers areas as wide as 100 to 300 km{sup 2}, and studies possible existence of high-temperature geothermal energy. The survey B covers areas of 50 to 70 km{sup 2}, investigates availability of geothermal resources, and assesses environmental impacts. The survey C covers areas of 5 to 10 km{sup 2}, and includes production well drilling and long-term discharge tests, other than those carried out by the surveys A and B. Results derived in each fiscal year are evaluated and judged to establish development plans for the subsequent fiscal year. This paper summarizes development results on 38 areas from among 45 areas surveyed since fiscal 1980. Development promotion surveys were carried out over seven areas in fiscal 1994. Development is in progress not only on utilization of high-temperature steam, but also on binary cycle geothermal power generation utilizing hot waters of 80 to 150{degree}C. Fiscal 1994 has carried out discussions for spread and practical use of the systems (particularly on economic effects), and development of small-to-medium scale binary systems. 2 figs., 1 tab.

  11. Geothermal drilling in Cerro Prieto

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez A., Bernardo

    1982-08-10

    The number of characteristics of the different wells that have been drilled in the Cerro Prieto geothermal field to date enable one to summarize the basic factors in the applied technology, draw some conclusions, improve systems and procedures, and define some problems that have not yet been satisfactorily solved, although the existing solution is the best now available. For all practical purposes, the 100 wells drilled in the three areas or blocks into which the Cerro Prieto field has been divided have been completed. Both exploratory and production wells have been drilled; problems of partial or total lack of control have made it necessary to abandon some of these wells, since they were unsafe to keep in production or even to be used for observation and/or study. The wells and their type, the type of constructed wells and the accumulative meters that have been drilled for such wells are summarized.

  12. Geothermally Coupled Well-Based Compressed Air Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Casie L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horner, Jacob A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cabe, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Appriou, Delphine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGrail, B. Peter [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-20

    Previous work by McGrail et al. (2013, 2015) has evaluated the possibility of pairing compressed air energy storage with geothermal resources in lieu of a fossil-fired power generation component, and suggests that such applications may be cost competitive where geology is favorable to siting both the geothermal and CAES components of such a system. Those studies also note that the collocation of subsurface resources that meet both sets of requirements are difficult to find in areas that also offer infrastructure and near- to mid-term market demand for energy storage. This study examines a novel application for the compressed air storage portion of the project by evaluating the potential to store compressed air in disused wells by amending well casings to serve as subsurface pressure vessels. Because the wells themselves would function in lieu of a geologic storage reservoir for the CAES element of the project, siting could focus on locations with suitable geothermal resources, as long as there was also existing wellfield infrastructure that could be repurposed for air storage. Existing wellfields abound in the United States, and with current low energy prices, many recently productive fields are now shut in. Should energy prices remain stagnant, these idle fields will be prime candidates for decommissioning unless they can be transitioned to other uses, such as redevelopment for energy storage. In addition to the nation’s ubiquitous oil and gas fields, geothermal fields, because of their phased production lifetimes, also may offer many abandoned wellbores that could be used for other purposes, often near currently productive geothermal resources. These existing fields offer an opportunity to decrease exploration and development uncertainty by leveraging data developed during prior field characterization, drilling, and production. They may also offer lower-cost deployment options for hybrid geothermal systems via redevelopment of existing well-field infrastructure

  13. Geothermally Coupled Well-Based Compressed Air Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, C L [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horner, Jacob A [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Appriou, Delphine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGrail, B Peter [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-01

    Previous work by McGrail et al. (2013, 2015) has evaluated the possibility of pairing compressed air energy storage with geothermal resources in lieu of a fossil-fired power generation component, and suggests that such applications may be cost competitive where geology is favorable to siting both the geothermal and CAES components of such a system. Those studies also note that the collocation of subsurface resources that meet both sets of requirements are difficult to find in areas that also offer infrastructure and near- to mid-term market demand for energy storage. This study examines a novel application for the compressed air storage portion of the project by evaluating the potential to store compressed air in disused wells by amending well casings to serve as subsurface pressure vessels. Because the wells themselves would function in lieu of a geologic storage reservoir for the CAES element of the project, siting could focus on locations with suitable geothermal resources, as long as there was also existing wellfield infrastructure that could be repurposed for air storage. Existing wellfields abound in the United States, and with current low energy prices, many recently productive fields are now shut in. Should energy prices remain stagnant, these idle fields will be prime candidates for decommissioning unless they can be transitioned to other uses, such as redevelopment for energy storage. In addition to the nation’s ubiquitous oil and gas fields, geothermal fields, because of their phased production lifetimes, also may offer many abandoned wellbores that could be used for other purposes, often near currently productive geothermal resources. These existing fields offer an opportunity to decrease exploration and development uncertainty by leveraging data developed during prior field characterization, drilling, and production. They may also offer lower-cost deployment options for hybrid geothermal systems via redevelopment of existing well-field infrastructure

  14. Geothermal projects. A challenge for rig equipment and performance drilling

    Energy Technology Data Exchange (ETDEWEB)

    Janecke, Florian [KCA Deutag Drilling, Bad Bentheim (Germany)

    2012-03-15

    In recent years a number of geothermal projects in Germany successfully reached production phase. Although there are some opinions that geothermal drilling is different from oil and gas drilling, these differences are small and are outweighed by the common characteristics. In fact, the geothermal industry should take account of the lessons learned during decades of oil and gas well drilling, best practice initiatives in process optimization and equipment selection, as these hold the potential to add value to geothermal applications. Key challenges of geothermal drilling applications derive from a considerably higher degree of uncertainty resulting from a lack of long-term experience and offset well information. Geothermal drilling experience in Germany is still restricted to a small number of projects scattered in location and each unique in scope and technical realization. This hampers the learning curve, when compared with established oilfield experience and makes it more difficult to use standardized approaches towards well construction and availability of highly specialized equipment. For example, performance improvement processes and subsequent cost reductions in oil and gas drilling applications became attainable through developing existing fields and utilizing knowledge gained from offset wells with comparable characteristics. The transfer and application of established methods could provide significant improvements to the drilling of geothermal projects. (orig.)

  15. Cation Loss of BaCa 0.393Nb 0.606O 2.91 in Aqueous Media: Amorphization at Room Temperature

    Science.gov (United States)

    Schober, T.; Szot, K.; Barton, M.; Kessler, B.; Breuer, U.; Penkalla, H. J.; Speier, W.

    2000-02-01

    The complex perovskite BaCa(1+x)/3Nb(2-x)/3O3-x/2 (here x=0.18), also referred to as BCN18, is a widely studied high-temperature proton conductor which has O-vacancies in the dry state accommodating highly mobile protonic defects in the wet state. Experimental evidence is given that BCN18 exposed to a very dilute acid (here HCl), or even hot water, undergoes a remarkable reaction to an amorphous state within a surface layer. The thickness of this layer ranges from tens of nm to several μm depending on exposure time. The amorphous layer is studied with TEM, XRD, XPS, SNMS, TRFA, and AFM. It is concluded that Ba and Ca are almost completely leached out of the surface layer. Protons penetrate into the solid, forming an intermediate, unstable solid acid, rich in Nb and O. The latter eventually collapses into an amorphous phase of Nb, O, and some water. A prerequisite of the above scheme inferred from the kinetics of the process is the presence of planar defects or channels of amorphous character in the initial BCN18 structure that allow rapid diffusion of Ba, Ca, and H. The present model assumes a block arrangement for the initial BCN18 with perfect perovskite structure inside the blocks, separated by thin amorphous slabs.

  16. Update of Geothermics in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Negrin, Luis C.A.; Quijano Leon, Jose Luis [Comision Federal de Electricidad, Morelia, Michoacan (Mexico)

    2004-12-01

    Four geothermal fields are currently operating in Mexico (Cerro Prieto, Los Azufres, Los Humeros and Las Tres Virgenes), with a total installed geothermal-electric capacity of 953 megawatts (MW). This means the country is located in third place, worldwide, just behind the USA and Philippines. Thirty-six power plants of several types (condensing, back pressure and binary cycle), between 1.5 and 110 MW, operate in the fields, fed by 197 wells with a combined production of 7,700 metric tons of steam per hour (t/h). These production wells have depths between 600 and 4,400 meters. Steam comes with 8,750 t/h of brine that is injected through 19 injection wells or treated in a solar evaporation pond of 14 km2 in Cerro Prieto. During 2003, steam produced in those fields equaled 67.5 million metric tons, and the power plants generated 6,282 gigawatt-hours (GWh), which represented 3.1% of the electric energy produced in Mexico. All the power plants and the geothermal fields are operated bye the public utility, the Comision Federal de Electricidad (Comision Federal de Electricidad (CFE)). [Spanish] Actualmente se operan en Mexico cuatro campos geotermicos (Cerro Prieto, Los Azufres, Los Humeros y Las Tres Virgenes), con una capacidad geotermoelectrica total de 953 megawatts (MW). Esto coloca al pais en el tercer lugar mundial, detras de Estados Unidos y Filipinas. En esos campos operan treinta y seis unidades de tipos diversos (a condensacion, a contrapresion y de ciclo binario), entre 1.5 y 110 MW, alimentadas por 197 pozos con una produccion combinada de 7,700 toneladas de vapor por hora (t/h). Estos pozos productores tienen profundidades entre 600 y 4,400 metros. El vapor sale acompanado por 8,750 t/h de salmuera, que se inyecta en 19 pozos inyectores o se trata en una laguna de evaporacion solar de 14 km2 en Cerro Prieto. Durante 2003 el vapor producido en los campos sumo 67.5 millones de toneladas y las unidades generaron 6,282 gigawatts-hora (GWh), lo que represento el

  17. Geothermal energy program summary

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The Geothermal Technology Division (GTD) of the US Department of Energy (DOE) is charged with the lead federal role in the research and development (R D) of technologies that will assist industry in economically exploiting the nation's vast geothermal resources. The GTD R D Program represents a comprehensive, balanced approach to establishing all forms of geothermal energy as significant contributors to the nation's energy supply. It is structured both to maintain momentum in the growth of the existing hydrothermal industry and to develop long-term options offering the greatest promise for practical applications. This volume, Volume 2, contains a detailed compilation of each GTD-funded R D activity performed by national laboratories or under contract to industrial, academic, and nonprofit research institutions.

  18. Geothermal Plant Capacity Factors

    Energy Technology Data Exchange (ETDEWEB)

    Greg Mines; Jay Nathwani; Christopher Richard; Hillary Hanson; Rachel Wood

    2015-01-01

    The capacity factors recently provided by the Energy Information Administration (EIA) indicated this plant performance metric had declined for geothermal power plants since 2008. Though capacity factor is a term commonly used by geothermal stakeholders to express the ability of a plant to produce power, it is a term frequently misunderstood and in some instances incorrectly used. In this paper we discuss how this capacity factor is defined and utilized by the EIA, including discussion on the information that the EIA requests from operations in their 923 and 860 forms that are submitted both monthly and annually by geothermal operators. A discussion is also provided regarding the entities utilizing the information in the EIA reports, and how those entities can misinterpret the data being supplied by the operators. The intent of the paper is to inform the facility operators as the importance of the accuracy of the data that they provide, and the implications of not providing the correct information.

  19. Geothermal energy in perspective

    International Nuclear Information System (INIS)

    Geothermal energy is a varied discipline that challenges many separate scientific domains. Geological constraints limit access to thermal reservoirs, strength of materials limits the ability to drill into hot strata, mechanical constraints limit the extraction of energy from fluid at a small temperature difference and environmental concerns restrict the fluids production because of the gases released. These problems are all being investigated, and progress is constant and hopeful. The uses of geothermal energy are varied. They range from direct use in space heating to using geothermal steam to power turbines. Ground source heat pumps are a popular alternative to conventional air conditioning systems, and water source heat pumps are another proven alternative. Many other applications are on the horizon, including absorption chillers able to operate at a small temperature difference, higher tonnage ground source equipment and new approaches to hot dry rock power production

  20. Prospecting for geothermal energy through satellite based thermal data: Review and the way forward

    OpenAIRE

    F. Howari

    2015-01-01

    Geothermal investors need to be confident with the methods and results of exploration programs. Also cutting the upfront cost of geothermal exploration will further encourage investors to consider investment in this emerging clean energy field. Hence, it is of paramount importance to improve prospecting techniques in order to explore where economic concentrations of geothermal energy are to be expected.  The current study evaluates different approaches for downscaling thermal data from remote...

  1. Data acquisition for low-temperature geothermal well tests and long-term monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Lienau, P.J.

    1992-09-01

    Groundwater monitoring is an essential part of the development of a low-temperature geothermal field for production and injection wells. State water resource and environmental departments are requiring both geothermal well testing and long-term monitoring as a part of the permitting process for geothermal developments. This report covers water-level measurement methods, instruments used for well testing, geochemical sampling, examples of data acquisition and regulatory mandates on groundwater monitoring.

  2. Eighteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1993-01-28

    PREFACE The Eighteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 26-28, 1993. There were one hundred and seventeen registered participants which was greater than the attendance last year. Participants were from eight foreign countries: Italy, Japan, United Kingdom, Mexico, New Zealand, the Philippines, Guatemala, and Iceland. Performance of many geothermal fields outside the United States was described in several of the papers. Dean Gary Ernst opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a brief overview of the Department of Energy's current plan. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Mock who also spoke at the banquet. Thirty-nine papers were presented at the Workshop with two papers submitted for publication only. Technical papers were organized in twelve sessions concerning: field operations, The Geysers, geoscience, hot-dry-rock, injection, modeling, slim hole wells, geochemistry, well test and wellbore. Session chairmen were major contributors to the program and we thank: John Counsil, Kathleen Enedy, Harry Olson, Eduardo Iglesias, Marcelo Lippmann, Paul Atkinson, Jim Lovekin, Marshall Reed, Antonio Correa, and David Faulder. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to John Hornbrook who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

  3. Studies for recovering injection capacity in wells of the Cerro Prieto, BC, geothermal field; Estudios para recuperar la capacidad de aceptacion en pozos inyectores del campo geotermico de Cerro Prieto, BC

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Rosales, Julio [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia General de Cerro Prieto, Mexicali, Baja California (Mexico)]. E-mail: julio.alvarez@cfe.gob.mx

    2010-01-15

    As in geothermal fields around the world, at Cerro Prieto geothermal field, Baja California, former exploratory and production wells are used to inject residual brine. Since the 1980s, studies and activities have been carried out to find ways to recharge the reservoir and dispose of brine without harming the environment or underground aquifers. These include infiltration and cold-and-hot injection. Some of the studies are presented here, including analyses of litho-facies; core samples; pressure, temperature and spinner logs; well tests and injection rates-plus some studies on the shallow aquifer. All have been useful in fulfilling requirements made by environmental authorities. Because injection rates constantly decrease due to formation damage, it is proposed an additional technique be used to reduce such damages and prolong the lifetime of cold-and-hot injection wells-while ensuring the environment and shallow aquifers are not affected. [Spanish] Al igual que en diversos campos geotermicos en el mundo, en el de Cerro Prieto, Baja California se han utilizado tanto pozos inyectores perforados ex profeso como antiguos pozos exploratorios y productores para inyectar el fluido residual al subsuelo. Desde la decada de los 80 se han realizado diversos estudios y acciones en ese campo geotermico para recargar al yacimiento y para disponer del fluido residual, sin ocasionar danos al ambiente ni a los cuerpos hidricos del subsuelo, que van desde la infiltracion hasta la inyeccion en frio y en caliente. Este articulo presenta los diferentes estudios realizados con ese objetivo en el campo, incluyendo el analisis de litofacies, de nucleos de formacion, de registros de presion, temperatura y spinner, las pruebas en pozos y analisis de tasas de aceptacion, asi como los efectuados en el acuifero superficial. Todos ellos han sido de utilidad para atender los requerimientos de las autoridades ambientales. Finalmente, y en virtud de que las tasas de aceptacion de los pozos

  4. Geothermal Energy; (USA)

    Energy Technology Data Exchange (ETDEWEB)

    Raridon, M.H.; Hicks, S.C. (eds.)

    1991-01-01

    Geothermal Energy (GET) announces on a bimonthly basis the current worldwide information available on the technologies required for economic recovery of geothermal energy and its use as direct heat or for electric power production. This publication contains the abstracts of DOE reports, journal article, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past two months. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements.

  5. The Geothermal Progress Monitor: Design and Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Entingh, D.J.; Lopez, A.F.; Neham, E.A.

    1981-02-01

    The Geothermal Progress Monitor (GPM) is an information system that links the various elements of the public and private sectors of the geothermal industry. The monitoring effort emphasizes the identification and analysis of indicators of what the main participants in geothermal energy utilization--field developers, energy users and government agencies--are doing to foster the discovery, confirmation and use of this resource. The major indicators considered both important and measurable are leasing activities, drilling efforts, feasibility studies, construction plans and progress, costs of installations, levels of investment, environmental study and regulatory activities, legislative status and changes, and government monetary investments in projects and activities. The GPM is unique in that it is a network, a process, a project staff and a product. As a process, the GPM identifies, acquires stores, tabulates, analyzes and reports on the information obtained through its network structure. The GPM project staff maintains the other aspects of the GPM and in particular produces pertinent analyses and responds to queries by providing information or directing the requestors to the appropriate sources. Finally, the GPM is a periodic report which summarizes activities, status and trends in the geothermal industry.

  6. 2008 Geothermal Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    Cross, J.; Freeman, J.

    2009-07-01

    This report describes market-wide trends for the geothermal industry throughout 2008 and the beginning of 2009. It begins with an overview of the U.S. DOE's Geothermal Technology Program's (GTP's) involvement with the geothermal industry and recent investment trends for electric generation technologies. The report next describes the current state of geothermal power generation and activity within the United States, costs associated with development, financing trends, an analysis of the levelized cost of energy (LCOE), and a look at the current policy environment. The report also highlights trends regarding direct use of geothermal energy, including geothermal heat pumps (GHPs). The final sections of the report focus on international perspectives, employment and economic benefits from geothermal energy development, and potential incentives in pending national legislation.

  7. Multidisciplinary research of geothermal modeling

    Science.gov (United States)

    -Ing. Ulvi Arslan, Univ., ., Dr. _., Prof.; Heiko Huber, Dipl.-Ing.

    2010-05-01

    KEYWORDS Geothermal sciences, geothermics, research, theory and application, numerical calculation, geothermal modeling, Technical University Darmstadt, Ministry of Economics and Technology (BMWi) INTRODUCTION In times of global warming renewable, green energies are getting more and more important. The development of application of geothermal energy as a part of renewable energies in Germany is a multidisciplinary process of fast growing research and improvements. Geothermal energy is the energy, which is stored below earth's surface. The word geothermal derives from the Greek words geo (earth) and thermos (heat), so geothermal is a synonym to earth heat. Geothermal energy is one of the auspicious renewable energies. In average the temperature increases 3°C every 100 m of depth, which is termed as geothermal gradient. Therefore 99 percent of our planet is hotter than 1.000°C, while 99 percent of that last percent is even hotter than 100°C. Already in a depth of about 1 kilometer temperatures of 35 - 40°C can be achieved. While other renewable energies arise less or more from the sun, geothermal energy sources its heat from the earth's interior, which is caused mostly by radioactive decay of persistent isotopes. This means a possibility of a base-loadable form of energy supply. Especially efficient is the use of deep geothermal energy of high-enthalpie reservoirs, which means a high energy potential in low depths. In Germany no high-enthalpie reservoirs are given. To use the given low-enthalpie potential and to generate geothermal power efficiently inventions and improvements need to be performed. An important part of geothermal progresses is performed by universities with multidisciplinary research of geothermal modeling. Especially in deep geothermal systems numerical calculations are essential for a correct dimensioning of the geothermal system. Therefore German universities and state aided organizations are developing numerical programs for a detailed use of

  8. Potential for enhanced geothermal systems in Alberta, Canada

    International Nuclear Information System (INIS)

    The province of Alberta has a high demand of thermal energy for both industrial and residential applications. Currently, the vast majority of the heat used in these applications is obtained by burning natural gas. Geothermal energy production from deep aquifer systems in the sedimentary basin could provide an alternative sustainable source of heat that would significantly reduce greenhouse gas emissions. To date there has been no geothermal field development in Alberta because the average geothermal gradient was considered to be too low for economic geothermal energy generation. However, with new technologies for Enhanced Geothermal Systems (EGS), it may be possible to develop geothermal resources from the sedimentary rocks in the Western Canadian Sedimentary Basin (WCSB). A numerical feasibility study based on a regional geological model and existing and newly gained data was conducted to identify scenarios for geothermal energy production in the region. In central Alberta, three Devonian carbonate formations (Cooking Lake, Nisku, Wabamun) and the Cambrian Basal Sandstone Unit were identified as the highest geothermal potential zones. Thermal-hydraulic reservoir simulations for a 5 km × 5 km site in the city of Edmonton were performed to evaluate reservoir development concepts for these four potential target formations; therefore, hydraulic fracturing treatments were also simulated. Different utilization concepts are presented for possible applications of geothermal energy generation in residential, industrial and agricultural areas. The Cooking Lake formation and the Basal Sandstone Unit are potentially the most promising reservoirs because the most heat can be extracted and the applications for the heat are widespread although the costs are higher than utilizing the shallower formations. Reservoir stimulation considerably improves the economics in all formations

  9. Geothermal Program Review X: proceedings. Geothermal Energy and the Utility Market -- the Opportunities and Challenges for Expanding Geothermal Energy in a Competitive Supply Market

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Each year the Geothermal Division of the US Department of Energy conducts an in-depth review of its entire geothermal R&D program. The conference serves several purposes: a status report on current R&D activities, an assessment of progress and problems, a review of management issues, and a technology transfer opportunity between DOE and the US geothermal city. This year`s conference, Program Review X, was held in San Francisco on March 24--26, 1992. The theme of the review, ``Geothermal Energy and the Utility Market -- The Opportunities and Challenges for Expanding Geothermal Energy in a Competitive Supply Market,`` focused on the needs of the electric utility sector. Geothermal energy, with its power capacity potential of 10 GWe by the year 2010, can provide reliable, enviromentally clean electricity which can help offset the projected increase in demand. Program Review X consisted of seven sessions including an opening session with presentations by Mr. Vikram Budhraja, Vice President of System Planning and Operations, Southern California Edison Company, and Mr. Richard Jaros, President and Chief Operating Officer, California Energy Company. The six technical sessions included presentations by the relevant field researchers covering DOE-sponsored R&D in hydrothermal, hot dry rock, and geopressured energy. Individual projects are processed separately for the data bases.

  10. Geothermal energy: opportunities for California commerce. Phase I report

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    California's geographic and end-use markets which could directly use low and moderate temperature geothermal resources are ranked and described, as well as those which have the highest potential for near-term commercial development of these resources. Building on previous market surveys, the assessment determined that out of 38 geothermal resource areas with characteristics for direct use development, five areas have no perceived impediments to near-term development: Susanville, Litchfield, Ontario Hot Springs, Lake Elsinore, and the Salton Sea Geothermal Field. Twenty-nine applications were compared with previously selected criteria to determine their near-term potential for direct use of geothermal fluids. Seven categories were found to have the least impediments to development; agriculture and district heating applications are considered the highest. Ten-year projections were conducted for fossil fuel displacement from the higher rated applications. It is concluded that greenhouses have the greatest displacement of 18 x 10/sup 6/ therms per year.

  11. Isotope and hydrogeochemical studies of southern Jiangxi geothermal systems, China

    International Nuclear Information System (INIS)

    Southern Jiangxi is a geothermally active region, especially in Hengjing area. According to the work plan of IAEA Regional Collaboration in the Development of Geothermal Energy Resources and Environment Management through Isotope Techniques in East Asia and the Pacific (RAS-8-075), field investigation was carried out in Hengjing, southern Jiangxi Province, to demonstrate the use of isotope and geochemical techniques in low to medium temperature geothermal system. During the field investigation, 19 samples were taken from cold springs, hot springs and surface water in the area to determine their hydrochemical and gas compositions, hydrogen, oxygen, carbon and helium isotopes. The results of the study have shown that the geothermal waters in the studying region are of the same characteristics with the local meteoric water in oxygen and hydrogen isotope composition, indicating the geothermal waters are mainly derived from the local precipitation, while the gas composition and carbon and helium isotopes reveal that some gases in the geothermal waters have mantle origin. (author)

  12. Geothermal Greenhouse Information Package

    Energy Technology Data Exchange (ETDEWEB)

    Rafferty, K. [P.E.; Boyd, T. [ed.

    1997-01-01

    This package of information is intended to provide a foundation of background information for developers of geothermal greenhouses. The material is divided into seven sections covering such issues as crop culture and prices, operating costs for greenhouses, heating system design, vendors and a list of other sources of information.

  13. Geothermal energy conversion facility

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.F.

    1997-12-31

    With the termination of favorable electricity generation pricing policies, the geothermal industry is exploring ways to improve the efficiency of existing plants and make them more cost-competitive with natural gas. The Geothermal Energy Conversion Facility (GECF) at NREL will allow researchers to study various means for increasing the thermodynamic efficiency of binary cycle geothermal plants. This work has received considerable support from the US geothermal industry and will be done in collaboration with industry members and utilities. The GECF is being constructed on NREL property at the top of South Table Mountain in Golden, Colorado. As shown in Figure 1, it consists of an electrically heated hot water loop that provides heating to a heater/vaporizer in which the working fluid vaporizes at supercritical or subcritical pressures as high as 700 psia. Both an air-cooled and water-cooled condenser will be available for condensing the working fluid. In order to minimize construction costs, available equipment from the similar INEL Heat Cycle Research Facility is being utilized.

  14. Geothermal Grows Up

    Science.gov (United States)

    Johnson, William C.; Kraemer, Steven; Ormond, Paul

    2011-01-01

    Self-declared energy and carbon reduction goals on the part of progressive colleges and universities have driven ground source geothermal space heating and cooling systems into rapid evolution, as part of long-term climate action planning efforts. The period of single-building or single-well solutions is quickly being eclipsed by highly engineered…

  15. Review of geothermal subsidence

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, S.L.; Fair, J.A.; Henderson, F.B. III; Schwartz, S.R.

    1975-09-01

    Forty-nine citations are included most of which deal with geothermal subsidence. Other citations deal with subsidence caused by groundwater overdraft and oil and gas exploitation. Most of the entries have abstracts. A subject index, an author index, a list of references, and a glossary are included. (MHR)

  16. Geothermal investigations in Slovenia

    Directory of Open Access Journals (Sweden)

    Danilo Ravnik

    1991-12-01

    Full Text Available The paper presents the methodology and the results of geothermal investigations, based on seventy-two boreholes in the territory of the Republic of Slovenia.The data of fundamental geothermal quantities: formation temperature, thermal conductivity, and radiogenic heat production of rocks as well as surface heat flow density are stored in a computerized data base. Their synthesis is given in the map of formation temperatures at 1000 m depth and in the map of surface heat flow density. In both maps the thermal difference between the Pannonian basin in theeastern and the Dinarides in the western part of Slovenia is clearly expressed.However, in the boundary area between these two tectonic units, for a distance of about 100 km in SW-NE direction, elevated horizontal gradients of formation temperature as well as heat flow density are evident. A small positive thermal anomaly in the Ljubljana depression is conspicuous.The low-temperature geothermal resources in Slovenia such as thermalsprings and thermal water from boreholes, are estimated to have a flow rate of 1120 kg/s, corresponding to the ideal total heat production of 144 MWt. In the geothermally promising areas amounting to 3200 km2 the rate of accessible resource base (ARB down to the depth of 3 km has been assessed to about 8.5 x lO 20» J.

  17. Depo Gazı Enerji Üretim Tesisi Baca Gazı Atık Isısının Seralarda Değerlendirilmesi: İstanbul Örneği / Utilization of Waste Heat in Energy Production Plant from Landfill Gas at Greenhouses – Case Study in Istanbul

    Directory of Open Access Journals (Sweden)

    Volkan Enç

    2012-12-01

    yapılacaktır. Odayeri Düzenli Depolama Sahasında uygun alan tespiti ve yetiştirilecek ürün tespiti yapıldıktan sonra sera kurulumuna geçilmiştir. Seralarda yetiştirilecek ürünler için uygun koşulların sağlanması için iklimlendirme, sulama ve gübreleme sistemi dizayn edilmiş ve sistemlerin tamamı tam otomasyonlu yapılmıştır. Depo gazı Enerji Üretim Tesisinde depo gazı yakılarak elektrik enerjisi üretiminde kullanılmakta, çok yüksek sıcaklıkta baca gazı atmosfere verilmektedir. Bu gazın değerlendirilmesinin önemli ekonomik faydalar sağlayacağı tespit edilmiştir. Seracılık, ülkemizde ve dünyada önemli bir tarım faaliyeti olmakta ve bu sürecin gelişimde ısıtma maliyeti önemli bir kısıt olarak karşımıza çıkmaktadır. Ülkemizde ısıtmaya bağlı olarak seracılık sıcak iklim bölgelerinde ve jeotermal enerjiye sahip bölgelerde yapılabilmektedir. Kış ısıtması genel itibari ile yetersiz kalmakta ya da hiç yapılamamaktadır. Proje sonucunda ortaya konan sistem, atık yönetiminin önemli sıkıntılarına çözümler getirmektedir. Belediyeler ve çok farklı sektörlerden işletmeler için problem teşkil eden atıl durumdaki depolama sahaları, değerlendirilemeyen atık ısı, seracılık alan sıkıntısı, sera ısıtma giderleri ve işsizlik gibi konular proje sayesinde bütüncül bir şekilde ele alınmıştır. Utilization of Waste Heat in Energy Production Plant from Landfill Gas at Greenhouses – Case Study in Istanbul After the lifetime of regular landfill ended, the rest of useful field becomes very limited. This areas used for green field are inactive in terms of environmental respect. The usage of the storage fields is critical for Istanbul where the empty lands are limited. Methane comes out from landfill and is controlled with different methods. Electricity is generated after the process of collecting, transferring, and burning of methane gas. Consuming methane gas in the plants leads

  18. Geothermal heat - The second stream for geothermal sectors; Electricity production: industries are facing the geological unexpected events; Heat networks: a new boom in France

    International Nuclear Information System (INIS)

    A first article proposes an overview of recent development in the field of geothermal power (individual heat pumps, urban heating networks, electricity production in volcanic context, and possibility of non conventional fields). These developments are notably interesting in a context of an evolving energy mix. Some benefits of geothermal power are outlined: a reliable and predictable production, and a low footprint. An installation of deep geothermal power in Alsace is presented. By evoking the construction of three high-energy geothermal power stations by GDF Suez in Sumatra, a second article outlines the high costs associated with exploration drilling which can face geological difficulties. It indicates and comments the distribution of costs among exploration, confirmation, authorizations, drilling, steam collection, electric plant, and connection to the grid. The third and last article comments the development of heat networks in France, and more particularly in the Parisian Basin which has the highest concentration of low-energy geothermal exploitations

  19. The use of petrology in Philippine geothermal system

    International Nuclear Information System (INIS)

    Petrology is used in the various stages of exploration, development and exploitation of a geothermal area, often in conjunction with other fields of study. It is an effective operations tool for predicting syn- and post-drilling conditions in a well, for field and well maintenance, and to a small extent for monitoring fluids passing through the pipelines and steam turbines. Petrological data and interpretations are important in assessing an exploration area, and in formulating and developing strategy of a geothermal field. (auth.). 11 figs

  20. Health impacts of geothermal energy

    International Nuclear Information System (INIS)

    Geothermal resources are used to produce electrical energy and to supply heat for non-electric applications like residential heating and crop drying. The utilization of geothermal energy consists of the extraction of hot water or steam from an underground reservoir followed by different methods of surface processing along with the disposal of liquid, gaseous, and even solid wastes. The focus of this paper is on electric power production using geothermal resources greater than 1500C because this form of geothermal energy utilization has the most serious health-related consequences. Based on measurements and experience at existing geothermal power plants, atmospheric emissions of non-condensing gases such as hydrogen sulphide and benzene pose the greatest hazards to public health. Surface and ground waters contaminated by discharges of spent geothermal fluids constitute another health hazard. In this paper it is shown that hydrogen sulphide emissions from most geothermal power plants are apt to cause odour annoyances among members of the exposed public -some of whom can detect this gas at concentrations as low as 0.002 ppmv. A risk-assessment model is used to estimate the lifetime risk of incurring leukaemia from atmospheric benzene caused by 2000 MW(e) of geothermal development in California's Imperial Valley. Also assessed is the risk of skin cancer due to the ingestion of river water in New Zealand that is contaminated by waste geothermal fluids containing arsenic. Finally, data on the occurrence of occupational disease in the geothermal industry is briefly summarized. (author)

  1. Developments in geothermal energy in Mexico-part one: general considerations

    Energy Technology Data Exchange (ETDEWEB)

    Mulas De Pozo, P.; Gomez, D.N.; Holland, F.A.

    1985-01-01

    Mexico is blessed with large geothermal resources. However, the task of extracting this energy efficiently and economically presents formidable problems. These are being tackled by scientists and engineers at the Instituto de Investigaciones Electricas, Cuernavaca. Their work, which is described in this paper, ranges from theoretical and laboratory studies to the operation of power generating units and heat pumps located in geothermal fields. Work is also underway on the evaluation of geothermal resources, developments in well drilling and termination technology, the solution of corrosion and scaling problems and the recovery of chemicals from geothermal fluids.

  2. Workshop on Electrical Methods in Geothermal Exploration

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The objectives of the workshop are: (1) to disseminate case histories of the application of electrical methods in the geothermal environment; (2) to disseminate information from theoretical and field studies bearing on the relative merits of the reconnaissance electrical methods such as MT/AMT, Tellurics, Bipole-dipole, and self-potential; (3) to disseminate information from theoretical and field studies bearing on the relative merits of the detailed electrical methods such as downhole-to-surface methods, Schlumberger resistivity, electromagnetics; (4) to make studies of the cost-effectiveness of reconnaissance versus detailed electrical methods; (5) to analyze the preferred location and/or locations of electrical methods in typical exploration architecture; (6) to develop goals for specific theoretical and field comparisons of the cost-effectiveness and resolution of the various electrical methods; (7) to develop goals for advances in (a) equipment, (b) data processing, and (c) data interpretation of electrical methods applied in the geothermal environment; and (8) to discuss the advantages and limitations of electrical methods in the search for geothermal resources.

  3. Geothermal development. Semi-annual report, October 1, 1980-March 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-31

    Three areas are reported: geothermal administration, geothermal planning, and other geothermal activities. Administration covers the status of the Imperial Valley Environmental Project transfer, update of the Geothermal Resource Center, and findings of the geothermal field inspections. Planning addresses Board of Supervisor actions, Planning Commission actions, notice of exemptions, and the master Environmental Impact Report for Salton Sea. The other activity includes the County Direct Heat Development study; the solicitation for district heating and cooling proposals; the new Geothermal Class II-1 disposal site; the DOE Region IX meeting in Tucson; and USGA designating a new KGRA, the East Brawley KGRA, the Westmoreland KGRA, and revising the southern border of the Salton Sea KGRA. (MHR)

  4. Analyses for long-term changes of geothermal systems using radiometric dating

    International Nuclear Information System (INIS)

    In order to evaluate effects of geothermal anomalies at high-level radioactive wastes disposal sites, information on long-term development and possible future activity of geothermal systems are needed. The only method to measure the time in the geothermal history is radiometric dating reset by geothermal heat, such as electron spin resonance (ESR) and thermoluminescence (TL) methods. Previous studies reported historical shift of surface manifestations for some kilometers in 0.1 m.y. by TL dating, and repose intervals of 0.4 m.y. by TL dating and 0.01 - 0.02 m.y. by ESR dating. Unfortunately, we have no more quantitative information on long-term geothermal activity because reports and researchers are insufficient. Further systematic studies on radiometric dating in present and past geothermal fields are needed to make guidelines for radioactive wastes disposal siting. (author)

  5. Review of international geothermal activities and assessment of US industry opportunities: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This study was initiated to review and assess international developments in the geothermal energy field and to define business opportunities for the US geothermal industry. The report establishes data bases on the status of worldwide geothermal development and the competitiveness of US industry. Other factors identified include existing legislation, tax incentives, and government institutions or agencies and private sector organizations that promote geothermal exports. Based on the initial search of 177 countries and geographic entities, 71 countries and areas were selected as the most likely targets for the expansion of the geothermal industry internationally. The study then determined to what extent their geothermal resource had been developed, what countries had aided or participated in this development, and what plans existed for future development. Data on the energy, economic, and financial situations were gathered.

  6. Prospecting for geothermal energy through satellite based thermal data: Review and the way forward

    Directory of Open Access Journals (Sweden)

    F. Howari

    2015-09-01

    Full Text Available Geothermal investors need to be confident with the methods and results of exploration programs. Also cutting the upfront cost of geothermal exploration will further encourage investors to consider investment in this emerging clean energy field. Hence, it is of paramount importance to improve prospecting techniques in order to explore where economic concentrations of geothermal energy are to be expected.  The current study evaluates different approaches for downscaling thermal data from remote sensing images together with factors in surface and subsurface environment. The paper discusses case studies, the challenge and the way forward for geothermal prospecting as well as practical solutions to discrepancy that faces the mapping and documentation of spatial geothermal anomalies.  It also discusses main criteria that should be considered while prospecting for geothermal energy.

  7. Geothermal system 'Toplec' and geothermal potential of Dojran Region

    International Nuclear Information System (INIS)

    The Toplec geothermal spring that expands into a wide geothermal net in the watershed of Lake Dojran along the geophysical exploration work carried out in the terrain, indicated the presence of a significant geothermal potential in the region. In the future it may become the major factor for the development of vegetable growing, the use of the medicinal properties of the mineral spas and tourism as well cis the prosperity of the region. Water temperature in Lake Dojran amounts from 15 to 28oC during the year that is much higher compared with the temperatures of water lakes in neighbouring Greece. This indicates that beneath Lake Dojran there are other geothermal sources that replenish the lake with thermal water. Such manifestations of geothermal energy in the region along with other thermal phenomena speak for the presence of large reserves of geothermal energy in the Dojran depression. (Author)

  8. Next Generation Geothermal Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Brugman, John; Hattar, Mai; Nichols, Kenneth; Esaki, Yuri

    1995-09-01

    cycle. Results of this study indicate that dual flash type plants are preferred at resources with temperatures above 400 F. Closed loop (binary type) plants are preferred at resources with temperatures below 400 F. A rotary separator turbine upstream of a dual flash plant can be beneficial at Salton Sea, the hottest resource, or at high temperature resources where there is a significant variance in wellhead pressures from well to well. Full scale demonstration is required to verify cost and performance. Hot water turbines that recover energy from the spent brine in a dual flash cycle improve that cycle's brine efficiency. Prototype field tests of this technology have established its technical feasibility. If natural gas prices remain low, a combustion turbine/binary hybrid is an economic option for the lowest temperature sites. The use of mixed fluids appear to be an attractive low risk option. The synchronous turbine option as prepared by Barber-Nichols is attractive but requires a pilot test to prove cost and performance. Dual flash binary bottoming cycles appear promising provided that scaling of the brine/working fluid exchangers is controllable. Metastable expansion, reheater, Subatmospheric flash, dual flash backpressure turbine, and hot dry rock concepts do not seem to offer any cost advantage over the baseline technologies. If implemented, the next generation geothermal power plant concept may improve brine utilization but is unlikely to reduce the cost of power generation by much more than 10%. Colder resources will benefit more from the development of a next generation geothermal power plant than will hotter resources. All values presented in this study for plant cost and for busbar cost of power are relative numbers intended to allow an objective and meaningful comparison of technologies. The goal of this study is to assess various technologies on an common basis and, secondarily, to give an approximate idea of the current costs of the technologies at

  9. The use of Geothermal Energy Resources in the Tourism Industry of Vojvodina (Northern Serbia

    Directory of Open Access Journals (Sweden)

    Nemanja Tomić

    2013-01-01

    Full Text Available Exploitation of geothermal energy in Vojvodina is still at an unjustly low level taking into account the abundance of resource locations, some of which are ranked among the most affluent in Europe. Moreover, development of geothermal exploitation started in Serbia at about the same time as in other countries whose geothermal energy facilities are now at the highest technological level and which are leaders in this field. The largest use of geothermal energy in Vojvodina is present in the non-energetic area, especially in spas and sports–recreational centers. Other, seasonal consumers of geothermal energy are from the field of industry and agricultural production where the energy is used for heating of cattle and poultry farms, greenhouses and other facilities. However these consumers use only a small portion of available geothermal resources. The main users are those from the tourism industry. The goal of this paper is to give an overview and an analysis of the use of geothermal energy resources, mainly geothermal waters, in the tourism industry of Vojvodina. It shows how these resources are used and also for what are they used by the tourism industry. The paper covers only geothermal resources that are currently being used by the tourism industry. The potential for future usage in this area is also briefly discussed

  10. Third workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P. (eds.)

    1977-12-15

    The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

  11. 2012 geothermal energy congress. Proceedings; Der Geothermiekongress 2012. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-10-16

    Within the Geothermal Energy Congress 2012 from 13th to 16th November 2012, in Karlsruhe (Federal Republic of Germany), the following lectures were held: (1) Comparison of different methods for the design of geothermal probes on the example of the thermal utilization of smouldering fires at heaps (Sylvia Kuerten); (2) Determination of the thermo-physical features of loose rocks (Johannes Stegner); (3) Tools for the planning and operation of district heating grids (Werner Seichter); (4) geo:build - System optimisation of the cooling mode of the ground-source heat and cooling supply (Franziska Bockelmann); (5) Successful and economic conception, planning and optimization of district heating grids (Werner Seichter); (6) Treacer / Heat transfer decoupling in a heterogeneous hydrothermal reservoir characterized by geological faults in the Upper Rhine Graben (I. Ghergut); (7) Determination of the porosity, thermal conductivity and particle size distribution in selected sections of the Meisenheim-1 drilling core (Saar-Nahe basin, Rheinland-Palatinate) under consideration of geothermally relevant formulation of questions (Gillian Inderwies); (8) Innovative technologies of exploration in the Jemez Geothermal project, New Mexico, USA (Michael Albrecht); (9) Geothermal energy, heat pump and TABS - optimization of planning, operational control and control (Franziska Bockelmann); (10) The impact of large-scale geothermal probes (storage probes) on the heat transfer and heat loss (Christopher Steins); (11) Numeric modelling of the permocarbon in the northern Upper Rhine Graben (L. Dohrer); (12) Engineering measurement solutions on quality assurance in the exploitation of geothermal fields (C. Lehr); (13) Evaluation and optimization of official buildings with the near-surface geothermal energy for heating and cooling (Franziska Bockelmann); (14) On-site filtration for a rapid and cost-effective quantification of the particle loading in the thermal water stream (Johannes Birner

  12. Geothermal development plan: Maricopa county

    Energy Technology Data Exchange (ETDEWEB)

    White, D.H.

    1981-01-01

    Maricopa county is the area of Arizona receiving top priority since it contains over half of the state's population. The county is located entirely within the Basin and Range physiographic region in which geothermal resources are known to occur. Several approaches were taken to match potential users to geothermal resources. One approach involved matching some of the largest facilities in the county to nearby geothermal resources. Other approaches involved identifying industrial processes whose heat requirements are less than the average assessed geothermal reservoir temperature of 110/sup 0/C (230/sup 0/F). Since many of the industries are located on or near geothermal resources, geothermal energy potentially could be adapted to many industrial processes.

  13. Geothermal energy utilization in Russia

    International Nuclear Information System (INIS)

    Geothermal energy use is the way to clean, sustainable energy development for the world. Russia has rich high and low temperature geothermal resources and is making progress using them - mostly with low-temperature geothermal resources and heat pumps This is optimal for many regions of Russia -in the European part, in the Urals and others. Electricity is generated by some geothermal power plants (GeoPP) only in the Kamchatka Peninsula and Kuril Islands There are two possible ways of using geothermal resources, depending on the properties of thermal waters heat/power and mineral extraction. The mineral-extraction direction is basic for geothermal waters, which contain valuable components in industrial quantities The most significant deposits of thermal waters represent the brines containing from 35 up to 400 and more g/l of salts. These are the minerals of many chemical dements. (author)

  14. Raft River well stimulation experiments: geothermal reservoir well stimulation program

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The Geothermal Reservoir Well Stimulation Program (GRWSP) performed two field experiments at the Raft River KGRA in 1979. Wells RRGP-4 and RRGP-5 were selected for the hydraulic fracture stimulation treatments. The well selection process, fracture treatment design, field execution, stimulation results, and pre- and post-job evaluations are presented.

  15. Water Desalination Using Geothermal Energy

    OpenAIRE

    Noreddine Ghaffour; Hacene Mahmoudi; Mattheus Goosen

    2010-01-01

    The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only...

  16. Chemical logging of geothermal wells

    Science.gov (United States)

    Allen, C.A.; McAtee, R.E.

    The presence of geothermal aquifers can be detected while drilling in geothermal formations by maintaining a chemical log of the ratio of the concentrations of calcium to carbonate and bicarbonate ions in the return drilling fluid. A continuous increase in the ratio of the concentrations of calcium to carbonate and bicarbonate ions is indicative of the existence of a warm or hot geothermal aquifer at some increased depth.

  17. Water Desalination using geothermal energy

    KAUST Repository

    Goosen, M.

    2010-08-03

    The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only in the presence of cheap geothermal reservoirs or in decentralized applications focusing on small-scale water supplies in coastal regions, provided that society is able and willing to pay for desalting. 2010 by the authors; licensee MDPI, Basel, Switzerland.

  18. Water desalination using geothermal energy

    International Nuclear Information System (INIS)

    The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only in the presence of cheap geothermal reservoirs or in decentralized applications focusing on small-scale water supplies in coastal regions, provided that society is able and willing to pay for desalting. (authors)

  19. Water Desalination Using Geothermal Energy

    Directory of Open Access Journals (Sweden)

    Noreddine Ghaffour

    2010-08-01

    Full Text Available The paper provides a critical overview of water desalination using geothermal resources. Specific case studies are presented, as well as an assessment of environmental risks and market potential and barriers to growth. The availability and suitability of low and high temperature geothermal energy in comparison to other renewable energy resources for desalination is also discussed. Analysis will show, for example, that the use of geothermal energy for thermal desalination can be justified only in the presence of cheap geothermal reservoirs or in decentralized applications focusing on small-scale water supplies in coastal regions, provided that society is able and willing to pay for desalting.

  20. Direct application of geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    Reistad, G.M.

    1980-01-01

    An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)