Sample records for auxiliary systems

  1. System Study: Auxiliary Feedwater 1998–2013

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, John Alton [Idaho National Lab. (INL), Idaho Falls, ID (United States). Risk Assessment and Management Services Dept.


    This report presents an unreliability evaluation of the auxiliary feedwater (AFW) system at 69 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the AFW results.

  2. System Study: Auxiliary Feedwater 1998-2014

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, John Alton [Idaho National Lab. (INL), Idaho Falls, ID (United States). Risk Assessment and Management Services Dept.


    This report presents an unreliability evaluation of the auxiliary feedwater (AFW) system at 69 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2014 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10 year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing or decreasing trends were identified in the AFW results.

  3. Engine Auxiliary System Guideline: Lubricating Oil Systems


    Linna, Joni


    This thesis was done for Wärtsilä Technical Services organization, the purpose of this work was to gather and structure information about the lubricating oil systems from the company’s internal databases, interviews with system specialists and from different literature sources covering Ship Power and Power Plant products. The outcome was a guideline, covering typical power plant and marine system descriptions, all components used in the lubricating oil system with their functional description...

  4. Auxiliary DCP data acquisition system. [airborne system (United States)

    Snyder, R. V.


    An airborne DCP Data Aquisition System has been designed to augment the ERTS satellite data recovery system. The DCP's are data collection platforms located at pertinent sites. With the appropriate sensors they are able to collect, digitally encode and transmit environmental parameters to the ERTS satellite. The satellite in turn relays these transmissions to a ground station for processing. The satellite is available for such relay duty a minimum of two times in a 24-hour period. The equipment is to obtain continuous DCP data during periods of unusual environmental activity--storms, floods, etc. Two circumstances contributed to the decision to design such a system; (1) Wallops Station utilizes surveillance aircraft in support of rocket launches and also in support of earth resources activities; (2) the area in which Wallops is located, the Delaware and Chesapeake Bay areas, are fertile areas for DCP usage. Therefore, by developing an airborne DCP receiving station and installing it on aircraft more continuous DCP data can be provided from sites in the surrounding areas at relatively low cost.

  5. A Model of Ship Auxiliary System for Reliable Ship Propulsion

    Directory of Open Access Journals (Sweden)

    Dragan Martinović


    Full Text Available The main purpose of a vessel is to transport goods and passengers at minimum cost. Out of the analysis of relevant global databases on ship machinery failures, it is obvious that the most frequent failures occur precisely on the generator-running diesel engines. Any failure in the electrical system can leave the ship without propulsion, even if the main engine is working properly. In that case, the consequences could be devastating: higher running expenses, damage to the ship, oil spill or substantial marine pollution. These are the reasons why solutions that will prevent the ship being unable to manoeuvre during her exploitation should be implemented. Therefore, it is necessary to define a propulsion restoration model which would not depend on the primary electrical energy. The paper provides a model of the marine auxiliary system for more reliable propulsion. This includes starting, reversing and stopping of the propulsion engine. The proposed solution of reliable propulsion model based on the use of a shaft generator and an excitation engine enables the restoration of propulsion following total failure of the electrical energy primary production system, and the self-propelled ship navigation. A ship is an important factor in the Technology of Transport, and the implementation of this model increases safety, reduces downtime, and significantly decreases hazards of pollution damage.KEYWORDSreliable propulsion, failure, ship auxiliary system, control, propulsion restoration

  6. Auxiliary lift propulsion system with oversized front fan

    Energy Technology Data Exchange (ETDEWEB)

    Castells, O.T.; Johnson, J.E.; Rundell, D.J.


    A propulsion system for use primarily in V/STOL aircraft is provided with a variable cycle, double bypass gas turbofan engine and a remote augmenter to produce auxiliary lift. The fan is oversized in air-pumping capability with respect to the cruise flight requirements of the remainder of the engine and a variable area, low pressure turbine is capable of supplying varying amounts of rotational energy to the oversized fan, thereby modulating its speed and pumping capability. During powered lift flight, the variable cycle engine is operated in the single bypass mode with the oversized fan at its maximum pumping capability. In this mode, substantially all of the bypass flow is routed as an auxiliary airstream to the remote augmenter where it is mixed with fuel, burned and exhausted through a vectorable nozzle to produce thrust for lifting. Additional lift is generated by the high energy products of combustion of the variable cycle engine which are further energized in an afterburner and exhausted through a thrust vectorable nozzle at the rear of the engine.

  7. Interaction region design and auxiliary detector systems for an EIC

    Directory of Open Access Journals (Sweden)

    Petti R.


    Full Text Available There are a number of exciting physics opportunities at a future electron-ion collider facility. One possible design for such a facility is eRHIC, where the current RHIC facility located at Brookhaven National Lab would be transformed into an electron-ion collider. It is imperative for a seamless integration of auxiliary detector systems into the interaction region design to have a machine that meets the needs for the planned physics analyses, as well as take into account the space constraints due to the tunnel geometry and the necessary beam line elements. In this talk, we describe the current ideas for integrating a luminosity detector, electron polarimeter, roman pots, and a low Q2-tagger into the interaction region for eRHIC.

  8. Oxygen-hydrogen thrusters for Space Station auxiliary propulsion systems (United States)

    Berkman, D. K.


    The feasibility and technology requirements of a low-thrust, high-performance, long-life, gaseous oxygen (GO2)/gaseous hydrogen (GH2) thruster were examined. Candidate engine concepts for auxiliary propulsion systems for space station applications were identified. The low-thrust engine (5 to 100 lb sub f) requires significant departure from current applications of oxygen/hydrogen propulsion technology. Selection of the thrust chamber material and cooling method needed or long life poses a major challenge. The use of a chamber material requiring a minimum amount of cooling or the incorporation of regenerative cooling were the only choices available with the potential of achieving very high performance. The design selection for the injector/igniter, the design and fabrication of a regeneratively cooled copper chamber, and the design of a high-temperature rhenium chamber were documented and the performance and heat transfer results obtained from the test program conducted at JPL using the above engine components presented. Approximately 115 engine firings were conducted in the JPL vacuum test facility, using 100:1 expansion ratio nozzles. Engine mixture ratio and fuel-film cooling percentages were parametrically investigated for each test configuration.

  9. Sensitivity of energy and exergy performances of heating and cooling systems to auxiliary components

    DEFF Research Database (Denmark)

    Kazanci, Ongun Berk; Shukuya, Masanori; Olesen, Bjarne W.


    should be used in design and analysis of the whole heating and cooling systems, in addition to the energy analysis. In this study, water-based (floor heating and cooling, and radiator heating) and air-based (air heating and cooling) heating and cooling systems were compared in terms of their energy use...... and exergy consumption for auxiliary components (pumps and fans). The effects of the auxiliary components on whole system energy and exergy performance were identified. Water-based heating systems required 68% lower auxiliary exergy input than the warm-air heating system with heat recovery, and floor cooling...

  10. Low-cost auxiliary system for broadband NMR on strongly magnetic systems

    DEFF Research Database (Denmark)

    Nevald, Rolf; Hansen, Poul Erik


    A low cost auxiliary system consisting of He cryostat, superconducting magnet, and sample holder assembly with field probe has been constructed. The system meets the requirements of NMR on strongly paramagnetic or ordered magnetic materials, which are accurate temperature settings over a wide range...

  11. LOX/LH2 vane pump for auxiliary propulsion systems (United States)

    Hemminger, J. A.; Ulbricht, T. E.


    Positive displacement pumps offer potential efficiency advantages over centrifugal pumps for future low thrust space missions. Low flow rate applications, such as space station auxiliary propulsion or dedicated low thrust orbiter transfer vehicles, are typical of missions where low flow and high head rise challenge centrifugal pumps. The positive displacement vane pump for pumping of LOX and LH2 is investigated. This effort has included: (1) a testing program in which pump performance was investigated for differing pump clearances and for differing pump materials while pumping LN2, LOX, and LH2; and (2) an analysis effort, in which a comprehensive pump performance analysis computer code was developed and exercised. An overview of the theoretical framework of the performance analysis computer code is presented, along with a summary of analysis results. Experimental results are presented for pump operating in liquid nitrogen. Included are data on the effects on pump performance of pump clearance, speed, and pressure rise. Pump suction performance is also presented.

  12. [Analysis on prescription rules of treating senile dementia based on traditional Chinese medicine inheritance auxiliary systems]. (United States)

    Zong, Xin; Ji, Xu-Ming; Wei, Feng-Qin; Shi, Zuo-Rong


    This is designed to analyze and summarize medication rules for treating senile dementia with Chinese medicine in CNKI according to the traditional Chinese medicine (TCM) inheritance auxiliary system. Collect documents in CNKI that account treating senile dementia with Chinese formula; filter and establish a formula database, and then to search for medication rules on the TCM inheritance auxiliary system. It is filtered that 104 formulas are used for treating senile dementia screening treat senile dementia, involving 147 kinds of Chinese medicine. Tonic medicine are most frequently used, followed by the medicine of activating blood circulation and resuscitating; medicine pair most used is Ligusticum chuanxiong Hort-Acorus tatarinowii, accounting for 27.9% of all formula. And then 8 core pairs and 4 new formulas are evolved. Analysis on formulas for treating senile dementia filtered form CNKI by TCM inheritance auxiliary system shows prescription is mainly tonifying, activating blood circulation and resuscitating, that reveals prescription rules, to provide a reference for clinical treatment.

  13. Development of Intelligent Auxiliary System for Customized Physical Fitness and Healthcare

    Directory of Open Access Journals (Sweden)

    Huang Chung-Chi


    Full Text Available With the advent of global high-tech industry and commerce era, the sedentary reduces opportunities of physical activity. And physical fitness and health of people is getting worse and worse. At present, the shortage of physical fitness instructors greatly affected the effectiveness of health promotion. Therefore, it is necessary to develop an auxiliary system which can reduce the workload of instructors and enhance physical fitness and health for people. But current general physical fitness and healthcare system is hard to meet individualized needs. The main purpose of this research is to develop an intelligent auxiliary system for customized physical fitness and healthcare. It records all processes of physical fitness and healthcare system by wireless sensors network. The results of intelligent auxiliary systems for customized physical fitness and healthcare will be generated by fuzzy logic Inference. It will improve individualized physical fitness and healthcare. Finally, we will demonstrate the advantages of the intelligent auxiliary system for customized physical fitness and healthcare.

  14. Application of Sm0/Auxiliary and Sm0/MCln System in Organic Synthesis

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yong-Min; LIU Yun-Kuia


    @@Though samarium metal itself has strong reducingpower, in most cases, certain additives are still needed when it is used as a reductant because the surface of samarium metal is inactive.Thus Sm0/auxiliary systems are proposed.The explored systems include: Sm0/I2,Sm0/TMSCl, Sm0/THF-NH4Cl (aq.), Sm0/Cp2TiCl2,Sm(Hg), Sm0/cat.KI etc.

  15. A Model of Ship Auxiliary System for Reliable Ship Propulsion


    Dragan Martinović; Mato Tudor; Dean Bernečić


    The main purpose of a vessel is to transport goods and passengers at minimum cost. Out of the analysis of relevant global databases on ship machinery failures, it is obvious that the most frequent failures occur precisely on the generator-running diesel engines. Any failure in the electrical system can leave the ship without propulsion, even if the main engine is working properly. In that case, the consequences could be devastating: higher running expenses, damage to the ship, oil spill or su...

  16. Compact Reliable Robust (CORE) Power System for Auxiliary Power Applications (United States)


    SOFC stacks. The paper covers the power system development with the emphasis on the 300-hour demonstration of the 10 kWe reformer operating on JP-8...cell stack and its robustness while dramatically improving its tolerance to fuel impurities – closer to levels for SOFC stacks. This tolerance has...photograph of a SOFC reformer that was delivered to Army Research Laboratory (ARL). Presented in Figure 1b is a photograph of the 2 kWe reformer for HTPEM

  17. [Participation of dental auxiliary personnel in local health systems]. (United States)

    Frazão, P; Castellanos, R A


    Though numerous local health systems (sistemas locales de salud, or SILOS) in Brazil employ dental assistants, there is little information on the contributions these workers make to oral health programs. The purpose of this study was to examine the role of such workers in 10 SILOS in five municipalities in the state of São Paulo. Of the 325 dental assistants and dental hygienists employed in those systems, 245 (75.4%) answered a questionnaire that had been prepared. The results showed variations in the degree to which dental assistants participated in oral health promotion activities in the SILOS studied. In some SILOS, these workers devoted more time to dental health promotion activities than to helping perform dental tasks with individual patients. The most frequent oral health promotion activities were fluoride rinses, plaque detection followed by supervised brushing, and educational activities at basic health units and schools. In all cases, dental assistants working in the SILOS played a significant role in helping transform the practice of dentistry within the sphere of public health.

  18. Comparative LCA of methanol-fuelled SOFCs as auxiliary power systems on-board ships

    Energy Technology Data Exchange (ETDEWEB)

    Strazza, C.; Del Borghi, A.; Costamagna, P. [Department of Chemical and Process Engineering ' ' G.B. Bonino' ' (DICheP), University of Genoa, Via all' Opera Pia 15, 16145 Genova (Italy); Traverso, A.; Santin, M. [Department of Machines, Energetic Systems and Transport (DIMSET), University of Genoa, Via all' Opera Pia 15, 16145 Genova (Italy)


    Fuel cells own the potential for significant environmental improvements both in terms of air quality and climate protection. Through the use of renewable primary energies, local pollutant and greenhouse gas emissions can be significantly minimized over the full life cycle of the electricity generation process, so that marine industry accounts renewable energy as its future energy source. The aim of this paper is to evaluate the use of methanol in Solid Oxide Fuel Cells (SOFC), as auxiliary power systems for commercial vessels, through Life Cycle Assessment (LCA). The LCA methodology allows the assessment of the potential environmental impact along the whole life cycle of the process. The unit considered is a 20 kWel fuel cell system. In a first part of the study different fuel options have been compared (methanol, bio-methanol, natural gas, hydrogen from cracking, electrolysis and reforming), then the operation of the cell fed with methanol has been compared with the traditional auxiliary power system, i.e. a diesel engine. The environmental benefits of the use of fuel cells have been assessed considering different impact categories. The results of the analysis show that fuel production phase has a strong influence on the life cycle impacts and highlight that feeding with bio-methanol represents a highly attractive solution from a life cycle point of view. The comparison with the conventional auxiliary power system shows extremely lower impacts for SOFCs. (author)

  19. Development of Intelligent Auxiliary System for Customized Physical Fitness and Healthcare


    Huang Chung-Chi; Liu Hsiao-Man; Ke Yen-Ting


    With the advent of global high-tech industry and commerce era, the sedentary reduces opportunities of physical activity. And physical fitness and health of people is getting worse and worse. At present, the shortage of physical fitness instructors greatly affected the effectiveness of health promotion. Therefore, it is necessary to develop an auxiliary system which can reduce the workload of instructors and enhance physical fitness and health for people. But current general physical fitness a...

  20. Creating and manipulating non-Abelian anyons in cold atom systems using auxiliary bosons (United States)

    Zhang, Yuhe; Sreejith, G. J.; Jain, J. K.


    The possibility of realizing bosonic fractional quantum Hall effect in ultracold atomic systems suggests a new route to producing and manipulating anyons, by introducing auxiliary bosons of a different species that capture quasiholes and thus inherit their nontrivial braiding properties. States with localized quasiholes at any desired locations can be obtained by annihilating the auxiliary bosons at those locations. We explore how this method can be used to generate non-Abelian quasiholes of the Moore-Read Pfaffian state for bosons at filling factor ν =1 . We show that a Hamiltonian with an appropriate three-body interaction can produce two-quasihole states in two distinct fusion channels of the topological "qubit." Characteristics of these states that are related to the non-Abelian nature can be probed and verified by a measurement of the effective relative angular momentum of the auxiliary bosons, which is directly related to their pair distribution function. Moore-Read states of more than two quasiholes can also be produced in a similar fashion. We investigate some issues related to the experimental feasibility of this approach, in particular, how large the systems should be for a realization of this physics and to what extent this physics carries over to systems with the more standard two-body contact interaction.

  1. High voltage bus and auxiliary heater control system for an electric or hybrid vehicle (United States)

    Murty, Balarama Vempaty


    A control system for an electric or hybrid electric vehicle includes a vehicle system controller and a control circuit having an electric immersion heater. The heater is electrically connected to the vehicle's high voltage bus and is thermally coupled to a coolant loop containing a heater core for the vehicle's climate control system. The system controller responds to cabin heat requests from the climate control system by generating a pulse width modulated signal that is used by the control circuit to operate the heater at a duty cycle appropriate for the amount of cabin heating requested. The control system also uses the heater to dissipate excess energy produced by an auxiliary power unit and to provide electric braking when regenerative braking is not desirable and manual braking is not necessary. The control system further utilizes the heater to provide a safe discharge of a bank of energy storage capacitors following disconnection of the battery or one of the high voltage connectors used to transmit high voltage operating power to the various vehicle systems. The control circuit includes a high voltage clamping circuit that monitors the voltage on the bus and operates the heater to clamp down the bus voltage when it exceeds a pre-selected maximum voltage. The control system can also be used to phase in operation of the heater when the bus voltage exceeds a lower threshold voltage and can be used to phase out the auxiliary power unit charging and regenerative braking when the battery becomes fully charged.

  2. Design, Fabrication, and Testing of an Auxiliary Cooling System for Jet Engines (United States)

    Leamy, Kevin; Griffiths, Jim; Andersen, Paul; Joco, Fidel; Laski, Mark; Balser, Jeffrey (Technical Monitor)


    This report summarizes the technical effort of the Active Cooling for Enhanced Performance (ACEP) program sponsored by NASA. It covers the design, fabrication, and integrated systems testing of a jet engine auxiliary cooling system, or turbocooler, that significantly extends the use of conventional jet fuel as a heat sink. The turbocooler is designed to provide subcooled cooling air to the engine exhaust nozzle system or engine hot section. The turbocooler consists of three primary components: (1) a high-temperature air cycle machine driven by engine compressor discharge air, (2) a fuel/ air heat exchanger that transfers energy from the hot air to the fuel and uses a coating to mitigate fuel deposits, and (3) a high-temperature fuel injection system. The details of the turbocooler component designs and results of the integrated systems testing are documented. Industry Version-Data and information deemed subject to Limited Rights restrictions are omitted from this document.

  3. Linear CCD attitude measurement system based on the identification of the auxiliary array CCD (United States)

    Hu, Yinghui; Yuan, Feng; Li, Kai; Wang, Yan


    Object to the high precision flying target attitude measurement issues of a large space and large field of view, comparing existing measurement methods, the idea is proposed of using two array CCD to assist in identifying the three linear CCD with multi-cooperative target attitude measurement system, and to address the existing nonlinear system errors and calibration parameters and more problems with nine linear CCD spectroscopic test system of too complicated constraints among camera position caused by excessive. The mathematical model of binocular vision and three linear CCD test system are established, co-spot composition triangle utilize three red LED position light, three points' coordinates are given in advance by Cooperate Measuring Machine, the red LED in the composition of the three sides of a triangle adds three blue LED light points as an auxiliary, so that array CCD is easier to identify three red LED light points, and linear CCD camera is installed of a red filter to filter out the blue LED light points while reducing stray light. Using array CCD to measure the spot, identifying and calculating the spatial coordinates solutions of red LED light points, while utilizing linear CCD to measure three red LED spot for solving linear CCD test system, which can be drawn from 27 solution. Measured with array CCD coordinates auxiliary linear CCD has achieved spot identification, and has solved the difficult problems of multi-objective linear CCD identification. Unique combination of linear CCD imaging features, linear CCD special cylindrical lens system is developed using telecentric optical design, the energy center of the spot position in the depth range of convergence in the direction is perpendicular to the optical axis of the small changes ensuring highprecision image quality, and the entire test system improves spatial object attitude measurement speed and precision.

  4. Design, Testing and Modeling of the Direct Reactor Auxiliary Cooling System for AHTRs

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Quiping [The Ohio State Univ., Columbus, OH (United States); Sun, Xiaodong [The Ohio State Univ., Columbus, OH (United States); Chtistensen, Richard [The Ohio State Univ., Columbus, OH (United States); Blue, Thomas [The Ohio State Univ., Columbus, OH (United States); Yoder, Graydon [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Dane [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)


    The principal objective of this research is to test and model the heat transfer performance and reliability of the Direct Reactor Auxiliary Cooling System (DRACS) for AHTRs. In addition, component testing of fluidic diodes is to be performed to examine the performance and viability of several existing fluidic diode designs. An extensive database related to the thermal performance of the heat exchangers involved will be obtained, which will be used to benchmark a computer code for the DRACS design and to evaluate and improve, if needed, existing heat transfer models of interest. The database will also be valuable for assessing the viability of the DRACS concept and benchmarking any related computer codes in the future. The experience of making a liquid fluoride salt test facility available, with lessons learned, will greatly benefit the development of the Fluoride Salt-cooled High-temperature Reactor (FHR) and eventually the AHTR programs.

  5. Space shuttle auxiliary propulsion system design study. Phase C report: Oxygen-hydrogen RCS/OMS integration study (United States)

    Bruns, A. E.; Regnier, W. W.


    A comparison of the concepts of auxiliary propulsion systems proposed for the space shuttle vehicle is discussed. An evaluation of the potential of integration between the reaction control system and the orbit maneuvering system was conducted. Numerous methods of implementing the various levels of integration were evaluated. Preferred methods were selected and design points were developed for two fully integrated systems, one partially integrated system, and one separate system.

  6. Space shuttle auxiliary propulsion system design study. Phase C and E report: Storable propellants, RCS/OMS/APU integration study (United States)

    Anglim, D. D.; Bruns, A. E.; Perryman, D. C.; Wieland, D. L.


    Auxiliary propulsion concepts for application to the space shuttle are compared. Both monopropellant and bipropellant earth storable reaction control systems were evaluated. The fundamental concepts evaluated were: (1) monopropellant and bipropellant systems installed integrally within the vehicle, (2) fuel systems installed modularly in nose and wing tip pods, and (3) fuel systems installed modularly in nose and fuselage pods. Numerous design variations within these three concepts were evaluated. The system design analysis and methods for implementing each of the concepts are reported.

  7. Reliability evaluation of auxiliary feedwater system by mapping GO-FLOW models into Bayesian networks. (United States)

    Liu, Zengkai; Liu, Yonghong; Wu, Xinlei; Yang, Dongwei; Cai, Baoping; Zheng, Chao


    Bayesian network (BN) is a widely used formalism for representing uncertainty in probabilistic systems and it has become a popular tool in reliability engineering. The GO-FLOW method is a success-oriented system analysis technique and capable of evaluating system reliability and risk. To overcome the limitations of GO-FLOW method and add new method for BN model development, this paper presents a novel approach on constructing a BN from GO-FLOW model. GO-FLOW model involves with several discrete time points and some signals change at different time points. But it is a static system at one time point, which can be described with BN. Therefore, the developed BN with the proposed method in this paper is equivalent to GO-FLOW model at one time point. The equivalent BNs of the fourteen basic operators in the GO-FLOW methodology are developed. Then, the existing GO-FLOW models can be mapped into equivalent BNs on basis of the developed BNs of operators. A case of auxiliary feedwater system of a pressurized water reactor is used to illustrate the method. The results demonstrate that the GO-FLOW chart can be successfully mapped into equivalent BNs.

  8. Development on systems configuration in ITER Tokamak Complex and Auxiliary Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, Ingo, E-mail: [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Kotamaki, Miikka [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Schmieder, Laurent [Fusion for Energy (F4E), CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Cordier, Jean-Jacques; Chiocchio, Stefano; Carafa, Leontin; Klingsmith, James; Patisson, Laurent; Rigoni, Giuliano [ITER Organization, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Tsedri, Thibault [AREVA CNIM KAH System Engineering Support, CS 50497, 13593 Aix en Provence Cedex 3 (France)


    The ITER site consists of almost 30 buildings to service the Tokamak machine which is located in the centre of the Tokamak Complex facility with the Tokamak-, Diagnostic- and Tritium building. The design of a large part of the ITER plant systems will be executed by the ITER Domestic Agencies or their industrial suppliers under functional specifications provided by the ITER Organization. At the same time, the detailed design of the building is carried out by the European Domestic Agency 'Fusion for Energy' (F4E). In order to allow an efficient identification of the ITER configuration as well as to manage the concurrent engineering activities and to simplify the identification and assessment of changes, the design of each ITER plant systems is described in the so-called Configuration Management Models (CMM). These are light CATIA 3D models that define the required space envelope and the physical interfaces in-between the systems and the buildings. The paper describes the procedure adopted for the control of the baseline configuration of the Tokamak Complex facility and Auxiliary Buildings with their associated plant systems and illustrates the current status as well as recent developments in the different systems.

  9. Auxiliary feedwater system risk-based inspection guide for the H. B. Robinson nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Moffitt, N.E.; Lloyd, R.C.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States); Garner, L.W. [Nuclear Regulatory Commission, Washington, DC (United States)


    In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. H. B. Robinson was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the H. B. Robinson plant.

  10. Auxiliary feedwater system risk-based inspection guide for the South Texas Project nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Bumgardner, J.D.; Nickolaus, J.R.; Moffitt, N.E.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States)


    In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. South Texas Project was selected as a plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by the NRC inspectors in preparation of inspection plans addressing AFW risk important components at the South Texas Project plant.

  11. Auxiliary feedwater system risk-based inspection guide for the Point Beach nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lloyd, R C; Moffitt, N E; Gore, B F; Vo, T V; Vehec, T A [Pacific Northwest Lab., Richland, WA (United States)


    In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Point Beach was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRS. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Point Beach plant.

  12. Auxiliary feedwater system risk-based inspection guide for the McGuire nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Bumgardner, J.D.; Lloyd, R.C.; Moffitt, N.E.; Gore, B.F.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States)


    In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. McGuire was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the McGuire plant.

  13. Auxiliary feedwater system risk-based inspection guide for the Fort Calhoun nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Moffitt, N.E.; Gore, B.F.; Vehec, T.A.; Vo, T.V. [Pacific Northwest Lab., Richland, WA (United States)


    In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Fort Calhoun was selected as the sixth plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Fort Calhoun plant.

  14. A hybrid grid method in an auxiliary coordinate system for irregular fluid-solid interface modelling (United States)

    Qu, Yingming; Huang, Jianping; Li, Zhenchun; Li, Jinli


    Seismic wave propagation in a fluid-solid environment cannot be simulated with a single wave equation, but can be described by use of the acoustic and viscoelastic wave equations for their respective fluid and solid parts. Proper boundary conditions at the fluid-solid interface based on the relationship between pressure and stress are crucial when combining the two different wave equations. Traditional finite difference methods have had difficulties in dealing with the irregular fluid-solid interface topography. The Cartesian grids discretization leads to artificial reflections and diffractions during the conversion between acoustic wave and elastic waves. We propose a variable coordinate transformation methodology to simulate seismic waves in a fluid-solid environment. An irregular fluid-solid interface can be transformed into a horizontal interface, so that pressure and stress can be well converted. We also introduce a multiblock coordinate transformation (MCT) method which meshes each layer with curvilinear grids to transform the interface topography into a horizontal one, thereby allocating vertical sampling points adaptively. The grid size is determined adaptively based on the shape and the parameters of the target area, which reduces in size in when the layers are thin or exhibit low velocities. A Lebedev-standard staggered grid scheme is applied to the MCT method to reduce both the computational cost associated with the Lebedev grid scheme and the instability in the auxiliary coordinate system when using a standard staggered grid scheme.

  15. D and D of a plutonium research laboratory and related auxiliary systems

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Arocas, P.; Martinez Ortega, A.; Sama Colao, J.; Garcia Diaz, A.; Torre Rodriguez, J.; Diaz Diaz, J.L. [Safety Department, Ciemat, Avda. Complutense 22 E-28040 Madrid (Spain); Argiles, E. [Lainsa Poligono Industrial Europolis C/.Belgrado no. 6, 28232 Las Rozas, E-28232 Madrid (Spain); Garrido, C. [Iberdrola Ingenieria y construccion, Avda. Manoteras 20, E-28036 Madrid (Spain)


    CIEMAT, former Junta de Energia Nuclear (JEN) started nuclear research at the 60. decade, focussed on the development of pacific uses of Nuclear Energy. At that time, CIEMAT research and pilot plants developed involved the whole nuclear fuel cycle steps. It means from the uranium recovery to the spent fuel reprocessing. With this scope a plutonium research laboratory was constructed and operated from 1961 to the 90's focussed on chemistry of plutonium studies, separation processes and radiochemical analyses, in order to assist the working pilot plants at the Centre. Thereafter, as the result of the changes on the research objectives of CIEMAT, the plutonium laboratory suffered several modifications and finally it was safety stopped due to the obsolescence of its equipments and auxiliary systems. Present paper shows the D and D activities performed and techniques developed to avoid alpha emitter contamination. In every dismantling phase there were established the measures of operational radiological protection adapted to the radiological risk. Dosimetric controls realized during dismantlement showed that incorporation of radionuclides was not detected. Radiological final control was performed applying the derived levels of declassification to request the installation decommissioning. (authors)

  16. Enhancing VHTR Passive Safety and Economy with Thermal Radiation Based Direct Reactor Auxiliary Cooling System

    Energy Technology Data Exchange (ETDEWEB)

    Haihua Zhao; Hongbin Zhang; Ling Zou; Xiaodong Sun


    One of the most important requirements for Gen. IV Very High Temperature Reactor (VHTR) is passive safety. Currently all the gas cooled version of VHTR designs use Reactor Vessel Auxiliary Cooling System (RVACS) for passive decay heat removal. The decay heat first is transferred to the core barrel by conduction and radiation, and then to the reactor vessel by thermal radiation and convection; finally the decay heat is transferred to natural circulated air or water systems. RVACS can be characterized as a surface based decay heat removal system. The RVACS is especially suitable for smaller power reactors since small systems have relatively larger surface area to volume ratio. However, RVACS limits the maximum achievable power level for modular VHTRs due to the mismatch between the reactor power (proportional to volume) and decay heat removal capability (proportional to surface area). When the relative decay heat removal capability decreases, the peak fuel temperature increases, even close to the design limit. Annular core designs with inner graphite reflector can mitigate this effect; therefore can further increase the reactor power. Another way to increase the reactor power is to increase power density. However, the reactor power is also limited by the decay heat removal capability. Besides the safety considerations, VHTRs also need to be economical in order to compete with other reactor concepts and other types of energy sources. The limit of decay heat removal capability set by using RVACS has affected the economy of VHTRs. A potential alternative solution is to use a volume-based passive decay heat removal system, called Direct Reactor Auxiliary Cooling Systems (DRACS), to remove or mitigate the limitation on decay heat removal capability. DRACS composes of natural circulation loops with two sets of heat exchangers, one on the reactor side and another on the environment side. For the reactor side, cooling pipes will be inserted into holes made in the outer or

  17. Experimental investigation of a directionally enhanced DHX concept for high temperature Direct Reactor Auxiliary Cooling Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Joel T.; Blandford, Edward D., E-mail:


    Highlights: • A novel directional heat exchanger design has been developed. • Hydrodynamic tests have been performed on the proposed design. • Heat transfer performance is inferred by hydrodynamic results. • Results are discussed and future work is suggested. - Abstract: The use of Direct Reactor Auxiliary Cooling Systems (DRACSs) as a safety-related decay heat removal system for advanced reactors has developed historically through the Sodium Fast Reactor (SFR) community. Beginning with the EBR-II, DRACSs have been utilized in a large number of past and current SFR designs. More recently, the DRACS has been adopted for Fluoride Salt-Cooled High-Temperature Reactors (FHRs) for similar decay heat removal functions. In this paper we introduce a novel directionally enhanced DRACS Heat Exchanger (DHX) concept. We present design options for optimizing such a heat exchanger so that shell-side heat transfer is enhanced in one primary coolant flow direction and degraded in the opposite coolant flow direction. A reduced-scale experiment investigating the hydrodynamics of a directionally enhanced DHX was built and the data collected is presented. The concept of thermal diodicity is expanded to heat exchanger technologies and used as performance criteria for evaluating design options. A heat exchanger that can perform as such would be advantageous for use in advanced reactor concepts where primary coolant flow reversal is expected during Loss-of-Forced-Circulation (LOFC) accidents where the ability to circulate coolant is compromised. The design could also find potential use in certain advanced Sodium Fast Reactor (SFR) designs utilizing fluidic diode concepts.

  18. PS auxiliary magnet

    CERN Multimedia


    Units of the PS auxiliary magnet system. The picture shows how the new dipoles, used for vertical and horizontal high-energy beam manipulation, are split for installation and removal so that it is not necessary to break the accelerator vacuum. On the right, adjacent to the sector valve and the windings of the main magnet, is an octupole of the set.

  19. Mechanical (turbines and auxiliary equipment)

    CERN Document Server

    Sherry, A; Cruddace, AE


    Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

  20. Approach to prevent locking in a spring-damper system by adaptive load redistribution with auxiliary kinematic guidance elements (United States)

    Gehb, Christopher M.; Platz, Roland; Melz, Tobias


    In many applications, kinematic structures are used to enable and disable degrees of freedom. The relative movement between a wheel and the body of a car or a landing gear and an aircraft fuselage are examples for a defined movement. In most cases, a spring-damper system determines the kinetic properties of the movement. However, unexpected high load peaks may lead to maximum displacements and maybe to locking. Thus, a hard clash between two rigid components may occur, causing acceleration peaks. This may have harmful effects for the whole system. For example a hard landing of an aircraft can result in locking the landing gear and thus damage the entire aircraft. In this paper, the potential of adaptive auxiliary kinematic guidance elements in a spring-damper system to prevent locking is investigated numerically. The aim is to provide additional forces in the auxiliary kinematic guidance elements in case of overloading the spring-damper system and thus to absorb some of the impact energy. To estimate the potential of the load redistribution in the spring-damper system, a numerical model of a two-mass oscillator is used, similar to a quarter-car-model. In numerical calculations, the reduction of the acceleration peaks of the masses with the adaptive approach is compared to the Acceleration peaks without the approach, or, respectively, when locking is not prevented. In addition, the required force of the adaptive auxiliary kinematic guidance elements is calculated as a function of the masses of the system and the drop height, or, respectively, the impact energy.

  1. 46 CFR 58.01-35 - Main propulsion auxiliary machinery. (United States)


    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main propulsion auxiliary machinery. 58.01-35 Section 58... AUXILIARY MACHINERY AND RELATED SYSTEMS General Requirements § 58.01-35 Main propulsion auxiliary machinery. Auxiliary machinery vital to the main propulsion system must be provided in duplicate unless the...

  2. Design, Testing and Modeling of the Direct Reactor Auxiliary Cooling System for FHRs (United States)

    Lu, Qiuping

    Direct Reactor Auxiliary Cooling System (DRACS) is a passive decay heat removal system proposed for the Fluoride-salt-cooled High-temperature Reactor (FHR) that combines coated particle fuel and a graphite moderator with a liquid fluoride salt as the coolant. The DRACS features three coupled natural circulation/convection loops, relying completely on buoyancy as the driving force. These loops are coupled through two heat exchangers, namely, the DRACS Heat Exchanger (DHX) and the Natural Draft Heat Exchanger (NDHX). In addition, a fluidic diode is employed to minimize the parasitic flow into the DRACS primary loop and correspondingly the heat loss to the DRACS during normal operation of the reactor, but to keep the DRACS ready for activation, if needed, during accidents. While the DRACS concept has been proposed, there are no actual prototypic DRACS systems for FHRs built or tested in the literature. The primary goal of the present research is to design, test, and model the DRACS for FHR applications. Previously, a detailed modular design of the DRACS for a 20-MWth FHR was developed. As a starting point, the DRACS was designed to remove 1% of the reactor nominal power, i.e., 200 kW decay power. In addition, a detailed scaling analysis has been performed to develop the key non-dimensional numbers that characterize the DRACS system. Based on the previous work on the prototypic DRACS design and scaling analysis, two scaled-down test facilities have been designed and constructed, namely, Low-temperature DRACS Test Facility (LTDF) and High-temperature DRACS Test Facility (HTDF). The LTDF has a nominal power capacity of 6 kW. It uses 1.0-MPa water as the primary coolant, 0.1-MPa water as the secondary coolant, and ambient air as the ultimate heat sink. The main purpose of the LTDF is to examine the couplings among the three natural circulation/convection loops in the DRACS, as well as to provide design and operation experience for the HTDF. An extensive test matrix has

  3. The Acquisition of Auxiliary Syntax: A Longitudinal Elicitation Study. Part 1: Auxiliary BE (United States)

    Theakston, Anna L.; Rowland, Caroline F.


    Purpose: The question of how and when English-speaking children acquire auxiliaries is the subject of extensive debate. Some researchers posit the existence of innately given Universal Grammar principles to guide acquisition, although some aspects of the auxiliary system must be learned from the input. Others suggest that auxiliaries can be…

  4. 46 CFR 61.20-3 - Main and auxiliary machinery and associated equipment, including fluid control systems. (United States)


    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main and auxiliary machinery and associated equipment... SECURITY (CONTINUED) MARINE ENGINEERING PERIODIC TESTS AND INSPECTIONS Periodic Tests of Machinery and Equipment § 61.20-3 Main and auxiliary machinery and associated equipment, including fluid control...

  5. 基于Kinect的手术辅助系统研究%Research on Operation Auxiliary System Based on Kinect

    Institute of Scientific and Technical Information of China (English)

    陈燕军; 汪地; 杨浩; 卢泉奇; 苗同升


    Aiming at the high demand for sterile operating room environment and the objective constrains of regular disinfection and not operating during the operation for traditional interactive ways such as mouse and keyboard,analyze the human-computer interaction prob-lems in the operating room,and put forward a set of operation auxiliary system based on natural Kinect human computer interaction tech-nology. The system includes a patient database,a set of control procedure based on natural Kinect human-computer interaction technology under Windows system and a set of Kinect operation auxiliary system hardware. The experimental results show that the Kinect can collect the operator gesture,movement,sound and so on,that change to the command which the operating system could understand,carrying out corresponding operation for the system to support the operation. The system is beneficial for improving the operation conditions,saving the operation time and alleviating patients pain .%针对手术室无菌环境要求非常高的现实需求,以及传统鼠标键盘等人机交互方式存在的需要定期消毒且无法在手术过程中进行操作等客观限制,对目前手术室中人机交互存在的问题进行了分析,提出了一套基于Kinect自然人机交互技术的手术辅助系统。该系统包括一个病人资料库、一套Windows系统下基于Kinect自然人机交互技术的控制程序及一套Kinect手术辅助系统硬件。实验结果表明通过Kinect可以收集操作者的手势、动作、声音等,并将其转化为操作系统可以理解的命令,对手术辅助系统进行相关操作,从而辅助手术进行。该系统对于改善手术条件、节省手术时间、缓解病患痛苦具有一定帮助。

  6. Computation of dynamical correlation functions for many-fermion systems with auxiliary-field quantum Monte Carlo (United States)

    Vitali, Ettore; Shi, Hao; Qin, Mingpu; Zhang, Shiwei


    We address the calculation of dynamical correlation functions for many fermion systems at zero temperature, using the auxiliary-field quantum Monte Carlo method. The two-dimensional Hubbard hamiltonian is used as a model system. Although most of the calculations performed here are for cases where the sign problem is absent, the discussions are kept general for applications to physical problems when the sign problem does arise. We study the use of twisted boundary conditions to improve the extrapolation of the results to the thermodynamic limit. A strategy is proposed to drastically reduce finite size effects relying on a minimization among the twist angles. This approach is demonstrated by computing the charge gap at half filling. We obtain accurate results showing the scaling of the gap with the interaction strength U in two dimensions, connecting to the scaling of the unrestricted Hartree-Fock method at small U and Bethe ansatz exact result in one dimension at large U . An alternative algorithm is then proposed to compute dynamical Green functions and correlation functions which explicitly varies the number of particles during the random walks in the manifold of Slater determinants. In dilute systems, such as ultracold Fermi gases, this algorithm enables calculations with much more favorable complexity, with computational cost proportional to basis size or the number of lattice sites.

  7. The Development of a General Auxiliary Diagnosis System for Common Disease of Animal (United States)

    Xiao, Jianhua; Wang, Hongbin; Zhang, Ru; Luan, Peixian; Li, Lin; Xu, Danning

    In order to development one expert system for animal disease in china, and this expert system can help veterinary surgeon diagnose all kinds of disease of animal. The design of an intelligent medical system for diagnosis of animal diseases is presented in this paper. The system comprises three major parts: a disease case management system (DCMS), a Knowledge management system (KMS) and an Expert System (ES). The DCMS is used to manipulate patient data include all kinds of data about the animal and the symptom, diagnosis result etc. The KMS is used to acquire knowledge from disease cases and manipulate knowledge by human. The ES is used to perform diagnosis. The program is designed in N-layers system; they are data layer, security layer, business layer, appearance layer, and user interface. When diagnosis, user can select some symptoms in system group by system. One conclusion with three possibilities (final diagnosis result, suspect diagnosis result, and no diagnosis result) is output. By diagnosis some times, one most possible result can be get. By application, this system can increased the accurate of diagnosis to some extent, but the statistics result was not compute now.

  8. Numerical stabilization of entanglement computation in auxiliary-field quantum Monte Carlo simulations of interacting many-fermion systems (United States)

    Broecker, Peter; Trebst, Simon


    In the absence of a fermion sign problem, auxiliary-field (or determinantal) quantum Monte Carlo (DQMC) approaches have long been the numerical method of choice for unbiased, large-scale simulations of interacting many-fermion systems. More recently, the conceptual scope of this approach has been expanded by introducing ingenious schemes to compute entanglement entropies within its framework. On a practical level, these approaches, however, suffer from a variety of numerical instabilities that have largely impeded their applicability. Here we report on a number of algorithmic advances to overcome many of these numerical instabilities and significantly improve the calculation of entanglement measures in the zero-temperature projective DQMC approach, ultimately allowing us to reach similar system sizes as for the computation of conventional observables. We demonstrate the applicability of this improved DQMC approach by providing an entanglement perspective on the quantum phase transition from a magnetically ordered Mott insulator to a band insulator in the bilayer square lattice Hubbard model at half filling.

  9. Optimal Scheduling of a Battery Energy Storage System with Electric Vehicles’ Auxiliary for a Distribution Network with Renewable Energy Integration

    Directory of Open Access Journals (Sweden)

    Yuqing Yang


    Full Text Available With global conventional energy depletion, as well as environmental pollution, utilizing renewable energy for power supply is the only way for human beings to survive. Currently, distributed generation incorporated into a distribution network has become the new trend, with the advantages of controllability, flexibility and tremendous potential. However, the fluctuation of distributed energy resources (DERs is still the main concern for accurate deployment. Thus, a battery energy storage system (BESS has to be involved to mitigate the bad effects of DERs’ integration. In this paper, optimal scheduling strategies for BESS operation have been proposed, to assist with consuming the renewable energy, reduce the active power loss, alleviate the voltage fluctuation and minimize the electricity cost. Besides, the electric vehicles (EVs considered as the auxiliary technique are also introduced to attenuate the DERs’ influence. Moreover, both day-ahead and real-time operation scheduling strategies were presented under the consideration with the constraints of BESS and the EVs’ operation, and the optimization was tackled by a fuzzy mathematical method and an improved particle swarm optimization (IPSO algorithm. Furthermore, the test system for the proposed strategies is a real distribution network with renewable energy integration. After simulation, the proposed scheduling strategies have been verified to be extremely effective for the enhancement of the distribution network characteristics.

  10. Investigations upon the effects of an auxiliary brake system on the working parameters of diesel engines (United States)

    Suciu, Cornel; Mihai, Ioan


    Classical systems have the main disadvantage of being unable to ensure that high load diesel engine vehicles are slowed in good conditions, for the entire range of combinations of inclinations and lengths of sloped public roads. On such roads, where brakes are used repeatedly and for long periods, friction components that enter classical braking systems will overheat and lead to failure. The present paper aims to investigate, the efficiency of a braking system based on compression release, called a Jake Brake. In such a system, the exhaust valve is actuated at a certain predetermined angle of the crankshaft. The presented research was conducted on an experimental rig based on a four-stroke mono-cylinder diesel engine model Lombardini 6 LD400. Pressure and temperature evolutions were monitored before and during the use of the Jake Brake system. As the generated phonic pollution is the main disadvantage of such systems, noise generated in the vicinity of the engine was monitored as well. The monitored parameters were then plotted in diagrams that allowed evaluating the performances of the system.

  11. Finalization of the conceptual design of the auxiliary circuits for the European test blanket systems

    Energy Technology Data Exchange (ETDEWEB)

    Aiello, A., E-mail: [ENEA UTIS – C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Ghidersa, B.E. [Karlsruher Institut für Technologie (KIT) – Institut für Neutronenphysik und Reaktortechnik (INR), D-76021 Karlsruhe (Germany); Utili, M. [ENEA UTIS – C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Vala, L. [Sustainable Energy (SUSEN), Technological Experimental Circuits, Centrum vyzkumu Rez s.r.o. (CV Rez), Hlavni c.p. 130, CZ-250 68 Husinec-Rez (Czech Republic); Ilkei, T. [Institute for Particle and Nuclear Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest H-1525 (Hungary); Di Gironimo, G.; Mozzillo, R.; Tarallo, A. [CREATE/University of Naples Federico II, Department of Industrial Engineering, P.le Tecchio 80, 80125 Naples (Italy); Ricapito, I.; Calderoni, P. [TBM& MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Building B3, 08019 Barcelona (Spain)


    In view of the ITER conceptual design review, the design of the ancillary systems of the European test blanket systems presented in [1] has been updated and made consistent with the ITER requirements for the present design phase. Europe is developing two concepts of TBM, the helium cooled lithium lead (HCLL) and the helium cooled pebble bed (HCPB) one, having in common the cooling media, pressurized helium at 8 MPa [2]. TBS, namely helium cooling system (HCS), coolant purification system (CPS), lead lithium loop and tritium extraction/removal system (TES–TRS) have the purpose to cool down the TBM and to remove tritium to be driven to TEP from breeder and coolant. These systems are placed in port cell 16 (PC#16), chemical and volume control system (CVCS) area and tritium building. Starting from the pre-conceptual design developed in the past, more mature technical interfaces with the ITER facility have been consolidated and iterative design activities were performed to comply with design requirements/specifications requested by IO to conclude the conceptual design phase. In this paper the present status of design of the TBS is presented together with the preliminary integration in ITER areas.

  12. Evaluation of Effect of N{sub 2} Gas on the Cooling Capability of Passive Auxiliary Feedwater System (PAFS) in APR+

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yun Je; Kang, Kyong Ho; Yun, Byong Jo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)


    In Korea, Advanced Power Reactor Plus (APR+) has being developed by adding passive safety features to Advanced Power Reactor 1400MWe (APR1400). Passive Auxiliary Feedwater System (PAFS) is one of passive system adopted in the APR+ to replace the conventional active auxiliary feedwater system. Because PAFS removes decay heat from the reactor core, it is required to verify the performance of PAFS in postulated accidents cases. In addition, an effect of noncondensable gas on the heat removal capability of PAFS should be evaluated since the non-condensable gas may deteriorate a condensation heat transfer through the condensation heat exchanger in PAFS. In this study, the effect of N{sub 2} gas was evaluated using MARS

  13. Auxiliary verbs in Dinka

    DEFF Research Database (Denmark)

    Andersen, Torben


    Dinka, a Western Nilotic language, has a class of auxiliary verbs which is remarkable in the following four respects: (i) It is unusually large, comprising some 20 members; (ii) it is grammatically homogeneous in terms of both morphology and syntax; (iii) most of the auxiliary verbs correspond...... to adverbs in languages like English, while the rest are tense-aspect markers; and (iv) it is possible to combine several auxiliary verbs in a single clause. For some of the auxiliary verbs there are extant full verbs from which they have evolved. To some extent, therefore, it is possible to observe what...... semantic changes the auxiliary verbs have undergone or are undergoing during the process of grammaticalization....

  14. Research on Simulation of Marine Auxiliary Boiler System%船舶辅锅炉系统的仿真研究

    Institute of Scientific and Technical Information of China (English)

    刘鸿儒; 万隆君; 徐轶群


    In order to study the object of marine auxiliary boiler control system operation, we have researched its function and features, designed development platform using unity3D and accomplished the simulation of roaming and control operation of marine auxiliary boiler control system. Meantime taking roaming and water system control for example, we have introduced marine auxiliary boiler control system operation training simulation,the design thinking and effect of assessment system under this platform.%以船舶辅锅炉系统控制操作为对象,研究了其功能和特性,设计以Unity 3D作为开发平台,实现对船舶辅锅炉系统的漫游和控制操作仿真。同时以漫游和水系统控制操作实现为例,介绍在该平台下设计船舶辅锅炉控制系统仿真操作训练与评估系统的设计思路和效果。

  15. Support on water chemistry and processes for nuclear power plant auxiliary systems

    Energy Technology Data Exchange (ETDEWEB)

    Chocron, M.; Becquart, E.; La Gamma, A.M.; Schoenbrod, B. [Unidad de Actividad Quimica, Gcia. Centro Atomico Constituyentes, Comision Nacional de Energia, Buenos Aires (Argentina); Allemandi, W.; Fernandez, A.N.; Ovando, L. [Central Nuclear Embalse, Nucleoelectrica Argentina S.A. (Argentina)


    In particular PHWRs have a system devoted to the purification and upgrading of the collected heavy water leaks. The purification train is fed with different degradation ratios (D{sub 2}O/H{sub 2}O), activities and impurities. The water is distilled in a packed bed column filled with a mesh type packing. The mesh wire is made of a bronze substrate covered by copper oxides whose current composition has been determined by Moessbauer spectroscopy. With the purpose of minimizing the column stack corrosion, the water is pre-treated in a train consisting of an activated charcoal bed-strong cationic-anionic resin and a final polishing mixed bed resin. Ionic chemicals like acetic acid (whose provenance is suspected to come from the air treatment/D{sub 2}O recovery system where the regeneration is performed at high temperature) are detected by the conductivity and ion chromatography when they concentrate at the column bottom. Traces of oils are retained by the charcoal bed but some compounds extracted by the aqueous phase are suspected to be responsible for the resins fouling or precursors of potentially aggressive agents inside the distillation column. Those species have been detected and identified by gaseous chromatography-mass spectrometry (GC-MS). In the present work, the identification, evaluation of alternatives for the retention and results compared to the original products present in the water upgrading purification train have been summarized. (authors)

  16. Evaluation of the performance of the systems cooling auxiliary of the Almaraz NPP turbine building; Evaluacion del rendimiento de los sistemas de refrigeracion auxiliar del edificio de turbinas de CNA

    Energy Technology Data Exchange (ETDEWEB)

    Vilar Carmona, G.


    After the successive performance improvements, to evacuate the thermal loads, and maintain acceptable temperatures throughout the year, added an auxiliary cooling system of the building of turbine, TCA system, composed of 5 shot forced by unit cooling towers.

  17. CRH2型动车组辅助电源系统故障分析%Fault analysis of auxiliary power system in CRH2 bullet train

    Institute of Scientific and Technical Information of China (English)

    李向超; 王亦军


    探讨了300 km速度级CRH2C型动车组辅助电源系统的供电电压、工作原理以及内部构成。针对CRH2C型动车组辅助电源系统的常见故障,分析了故障发生的原因,并提出了有效的应急处理措施。%The supply voltage, working principle and internal structure of auxiliary power supply system in 300 km/h grade CRH2C bullet train are discussed. The common fault causes of auxiliary power supply system in CRH2C bullet train are analyzed. The effective emergent measures for the fault treatment are put forward.

  18. Proposed Auxiliary Boundary Stratigraphic Section and Point (ASSP) for the base of the Ordovician System at Lawson Cove, Utah, USA (United States)

    Miller, James F.; Evans, Kevin R.; Ethington, Raymond L.; Freeman, Rebecca; Loch, James D.; Repetski, John E.; Ripperdan, Robert; Taylor, John F.


    The Global boundary Stratotype Section and Point (GSSP) for the base of the Ordovician System is at the First Appearance Datum (FAD) of the conodont Iapetognathus fluctivagus at Green Point in Newfoundland, Canada. Strata there are typical graptolitic facies that were deposited near the base of the continental slope.We propose establishing an Auxiliary boundary Stratotype Section and Point (ASSP) at the FAD of I. fluctivagus at the Lawson Cove section in the Ibex area of Millard County, Utah, USA. There, strata consist of typical shelly facies limestones that were deposited on a tropical carbonate platform and contain abundant conodonts, trilobites, brachiopods, and other fossil groups. Cambrian and Ordovician strata in this area are ~5300m thick, with the Lawson Cove section spanning 243m in three overlapping segments. Six other measured and studied sections in the area show stratigraphic relationships similar to those at Lawson Cove. Faunas have been used to divide these strata into 14 conodont and 7 trilobite zonal units. The widespread olenid trilobite Jujuyaspis occurs ~90cm above the proposed boundary at Lawson Cove; this genus is generally regarded as earliest Ordovician. Rhynchonelliform and linguliform brachiopods are common to abundant and are useful for correlation. The FAD of Iapetognathus fluctivagus and occurrences of Jujuyaspis and the Lower Ordovician planktonic graptolite Anisograptus matanensis all occur within a 2.4m interval of strata at a nearby section. Non-biological correlation tools include a detailed sequence stratigraphic classification and a detailed carbon-isotope profile. Especially useful for correlation is a positive 13C excursion peak ~15cm below the proposed boundary horizon. All of these correlation tools form an integrated framework that makes the Lawson Cove section especially useful as an ASSP for global correlation of strata with faunas typical of shallow, warm-water, shelly facies.

  19. Auxiliary Deep Generative Models

    DEFF Research Database (Denmark)

    Maaløe, Lars; Sønderby, Casper Kaae; Sønderby, Søren Kaae;


    Deep generative models parameterized by neural networks have recently achieved state-of-the-art performance in unsupervised and semi-supervised learning. We extend deep generative models with auxiliary variables which improves the variational approximation. The auxiliary variables leave...... the generative model unchanged but make the variational distribution more expressive. Inspired by the structure of the auxiliary variable we also propose a model with two stochastic layers and skip connections. Our findings suggest that more expressive and properly specified deep generative models converge...

  20. 一种TMS320C6678辅助控制系统%An auxiliary control system for TMS320C6678

    Institute of Scientific and Technical Information of China (English)

    陈伟; 司峻峰; 黄晓林; 肇莹; 刘红星


    TMS320C6678是TI(Texas Instruments)推出的8核高性能DSP(Digital Signal Processor),其主频可高达1.25 GHz,然而其正常工作涉及复杂的辅助控制.C6678的EVM(Evaluation Module)提供了一种以FPGA(Field Programmable Gate Array)为核心的辅助控制系统方案.考虑到FPGA硬件成本和软件开发成本高,尝试设计了一种以单片机为核心的辅助控制系统.鉴于单片机的外部中断资源有限,为实现对诸多电源状态指示信号及复位信号的监控,提出了利用逻辑门的方案.又由于单片机与DSP电气特性不匹配,提出了利用单片机OD(Open-Drain)输出特性及电平转换芯片的方案.经过测试,该辅助控制系统能够满足C6678的所有要求,并最终应用到TMS320C6678的某系统中.%TMS320C6678 is a high-performance multicore DSP of Texas Instruments.This device can run at a core speed up to 1.25 GHz.In order to provide certain conditions for the DSP to work properly,some auxiliary controls are needed.The EVM for C6678 has provided a solution of auxiliary controls based on FPGA,which involves high developing costs of both hardware and software.In this paper,we proposed an auxiliary control system cored by a single-chip microcontroller.Considering that the external interrupt source of a single-chip microcontroller is limited, we utilized two logic gates to monitor the power-good signals and the reset request signals.However,there is the issue of electronic characteristic matching between the microcontroller and the DSP.We took advantage of the open-drain output characteristic of the microcontroller and involved a level shifter to solve the problem.Eventually,the new auxiliary control system was successfully applied to a TMS320C6678 system.Both hardware and software design of the new auxiliary control system were described detailedly.

  1. Operation and Control of a Direct-Driven PMSG-Based Wind Turbine System with an Auxiliary Parallel Grid-Side Converter

    Directory of Open Access Journals (Sweden)

    Jiawei Chu


    Full Text Available In this paper, based on the similarity, in structure and principle, between a grid-connected converter for a direct-driven permanent magnet synchronous generator (D-PMSG and an active power filter (APF, a new D-PMSG-based wind turbine (WT system configuration that includes not only an auxiliary converter in parallel with the grid-side converter, but also a coordinated control strategy, is proposed to enhance the low voltage ride through (LVRT capability and improve power quality. During normal operation, the main grid-side converter maintains the DC-link voltage constant, whereas the auxiliary grid-side converter functions as an APF with harmonic suppression and reactive power compensation to improve the power quality. During grid faults, a hierarchical coordinated control scheme for the generator-side converter, main grid-side converter and auxiliary grid-side converter, depending on the grid voltage sags, is presented to enhance the LVRT capability of the direct-driven PMSG WT. The feasibility and the effectiveness of the proposed system’s topology and hierarchical coordinated control strategy were verified using MATLAB/Simulink simulations.

  2. 46 CFR 58.25-10 - Main and auxiliary steering gear. (United States)


    ... 46 Shipping 2 2010-10-01 2010-10-01 false Main and auxiliary steering gear. 58.25-10 Section 58.25... AUXILIARY MACHINERY AND RELATED SYSTEMS Steering Gear § 58.25-10 Main and auxiliary steering gear. (a) Power-operated main and auxiliary steering gear must be separate systems that are independent throughout...

  3. 汽车真空辅助制动系统的设计与研究%Design and Research of Automotive Vacuum Auxiliary Braking System

    Institute of Scientific and Technical Information of China (English)

    刘树伟; 郭立新; 郝亮


    以汽车紧急制动工况为研究对象,设计和研制了一种汽车真空辅助制动系统,该系统主要包括机械执行机构、制动吸盘、真空系统、弹射收起系统、控制系统五个部分。对该系统进行了理论分析和实验研究,结果表明,该系统可显著提高汽车制动效能,可有效缩短汽车紧急制动时的制动距离,从而有效降低交通事故的发生概率并降低交通事故的严重程度。%An automotive vacuum auxiliary braking system was designed when the driver urgently braked the automobile.The system mainly contained five parts,such as mechanical actuator,braking sucker,vacuum system,ejection retracting system,the control system and so on.The vacuum auxiliary braking system could increase significantly the braking efficiency and shorten the braking distance of automobile emergency braking.After the theoretical analysis and the experimental research,the sys-tem will reduce effectively the probability and the damage degree of traffic accidents.

  4. Auxiliary Deep Generative Models

    DEFF Research Database (Denmark)

    Maaløe, Lars; Sønderby, Casper Kaae; Sønderby, Søren Kaae


    Deep generative models parameterized by neural networks have recently achieved state-of-the-art performance in unsupervised and semi-supervised learning. We extend deep generative models with auxiliary variables which improves the variational approximation. The auxiliary variables leave...... the generative model unchanged but make the variational distribution more expressive. Inspired by the structure of the auxiliary variable we also propose a model with two stochastic layers and skip connections. Our findings suggest that more expressive and properly specified deep generative models converge...... faster with better results. We show state-of-the-art performance within semi-supervised learning on MNIST (0.96%), SVHN (16.61%) and NORB (9.40%) datasets....

  5. Methodology for carrying out energy diagnosis in auxiliaries systems in thermal electrical central stations; Metodologia para realizar un diagnostico energetico en sistemas auxiliares de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Nebradt Garcia, Jesus [Comision Federal de Electricidad (CFE), Mexico, D. F. (Mexico); Rojas Hidalgo, Ismael; Huante Perez, Liborio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)


    One of the potential areas for energy saving in Central Electric Power Plants are the auxiliaries system, so as to based in a preliminary energy diagnosis and considering that energy saving measures would be taken, going from the instrumentation, operational changes in equipment, as well as in using velocity variators in motors, it turns out to be that the energy consumption of auxiliaries at 75% load in a 150 MW thermal power plant varies from 3% to 4% and for the case of a 350 MW power plant the energy consumption of the auxiliaries represents 2 to 3.5%. Nowadays this consumption are above 6%. Considering that the country has 40 units with capacities varying from 150 to 350 MW, the economical and the fuel saving would be substantial. This paper will present a summary of the methodology to be used to carry out this type of projects. [Espanol] Una de las areas potenciales de ahorro de energia en centrales termoelectricas son los sistemas auxiliares, de tal manera que basados en un diagnostico energetico preliminar y considerando que se aplicarian las medidas de ahorro de energia que van desde la instrumentacion, cambios operativos en equipos, asi como el uso de variadores de velocidad en motores, se tienen que los consumos de auxiliares para un 75% de carga en una central termoelectrica de 150 MW varian desde un 3% hasta un 4% y para el caso de una central termoelectrica de 350 MW, el consumo de auxiliares representa del 2 al 3.5%. Hoy en dia dichos consumos estan por encima del 6%. Si consideramos que el pais cuenta con 40 unidades que varian desde 150 MW hasta 350 MW, entonces los ahorros economicos y de combustible serian impactantes. La presente ponencia mostrara un resumen de la metodologia a emplear para la realizacion de este tipo de proyectos.

  6. Electric power plant technology. Generators, transformers, auxiliary installations, protective systems. Lecture notes. 5. rev. ed.; Elektrische Kraftwerkstechnik. Generatoren, Transformatoren, Eigenbedarfsanlagen, Schutzeinrichtungen. Vorlesungsskript

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Ulrich


    The lecture series on electric power plant engineering was initiated in 1969 by Prof. Helmut Schaefer, founder of the then department of power economy and power plant engineering. The lecture series was continuously updated in its contents and didactic approach, e.g. by integrating innovative power generation concepts like micro cogeneration plants and fuel cell systems. The focus is on the fundamentals and function of generators, main transformers, auxiliary installations and protective systems in power plant. Apart from the electrotechnical aspects, also aspects of mechanical engineering are gone into. Also discussed are energy conversion concepts fo renewable power generation plants like wind turbines and PV systems. This is the 5th, completely revised edition. It addresses primarily attendants of the lectures but may also serve as a textbook and reference manual for interested experts.

  7. Analysis and Comparing of Urban Rail Locomotive Auxiliary System AC Power Supply Mode%城轨列车辅助系统交流供电方式的分析与比较

    Institute of Scientific and Technical Information of China (English)



    Through analyzing the urban rail locomotive auxiliary system AC power system supply mode, comparing the ad-vantages and disadvantages of general power supply mode and individual supply mode, prove accordance to urban rail auxil-iary system AC power supply mode selection.%通过对城轨列车辅助系统交流供电方式进行分析,比较集中供电方式和分散供电方式的各自优劣,为城轨列车辅助系统交流供电供电方式选型提供依据。

  8. Auxiliary mass damper for Cardan suspended gyro (United States)

    Rosenberg, J.; Kahana, A.

    The paper describes a damping system for a spin-stabilized platform which involves the use of an auxiliary mass connected to the gimbal system by means of a spring and a viscous dash-pot. The damper inertia is insignificant in comparison with the platform inertia, resulting in a simplified model in which the nutational frequency is taken to be the forced frequency. An analysis is made of the interaction between the stabilized platform and the damper, which causes the appearance of three natural frequencies instead of the nutational frequency. The experimental realization of the auxiliary mass damper is discussed.

  9. Auxiliary power unit for moving a vehicle (United States)

    Akasam, Sivaprasad; Johnson, Kris W.; Johnson, Matthew D.; Slone, Larry M.; Welter, James Milton


    A power system is provided having at least one traction device and a primary power source configured to power the at least one traction device. In addition, the power system includes an auxiliary power source also configured to power the at least one traction device.

  10. Effect of Modifications to Induction System on Altitude Performance of V-1710-93 Engine III : Use of Parabolic Rotating Guide Vanes and NACA Designed Auxiliary-stage Inlet Elbow and Interstage Duct (United States)

    Standahar, Ray M; Mccarty, James S


    Bench runs of a modified V-1710-93 engine equipped with a two-stage supercharger, interstage carburetor, aftercooler assembly, and backfire screens have been made at a simulated altitude of 29,000 feet to determine the effect of several induction-system modifications on the engine and supercharger performance. The standard guide vanes on the auxiliary- and engine-stage superchargers were replaced by rotating guide vanes with a parabolic blade profile. The auxiliary-stage inlet elbow and interstage duct were replaced with new units of NACA design. These modifications were made one at a time and data were obtained after each change to determine the effect of each modification. All runs were made at a constant engine speed of 3000 rpm at a simulated altitude of 29,000 feet and all changes in engine power were made by varying the speed of the auxiliary-stage supercharger.

  11. VRV auxiliary air conditioning system for the BMW Group Pavillon, Munich; VRV-Zusatzklimaanlage fuer den BMW Group Pavillon in Muenchen

    Energy Technology Data Exchange (ETDEWEB)

    Pfeiffenberger, U. [Ingenieurgesellschaft Pfeiffenberger mbH, Neu-Isenburg (Germany); Zeller, A. [Daikin Airconditioning Germany GmbH, Unterhaching (Germany)


    The cooling capacity of the air conditioning system of this fully glazed, representative exhibition pavillong was increased. The auxiliary system was to meet a number of boundary conditions, e.g. conservation of a historical building, integration of the new components in the existing building, thermal comfort, optical attractivity. In order to ensure high thermal efficiency, compact size and energy conservation, a VRV inverter system was chosen. The fundamentals of dimensioning, the boundary conditions on the building side, and the technical systems are described, and preliminary operating experience is presented. (orig.) [German] Fuer einen vollverglasten, repraesentativen Ausstellungs-Pavillon musste die vorhandene Kuehl-Kapazitaet der klimatechnischen Anlage erhoeht werden. Die Zusatz-Installation sollte eine Vielzahl von Randbedingungen, wie z. B. Denkmalschutz des Gebaeudes, Integration der Bauteile in die vorhandenen Decken und Verkleidungen, Einhaltung der Komfortbedingungen, sowie ansprechendes optisches Aeusseres der sichtbaren Installationen erfuellen. Wegen der grossen Kaelteleistung bei geringstmoeglichem Platzbedarf und einer moeglichst energieguenstigen Betriebsweise wurde ein VRV-Inverter-System ausgewaehlt. Die Bemessungsgrundlagen, die gebaeudeseitigen Randbedingungen sowie die technische Loesung werden beschrieben und die ersten Betriebserfahrungen wiedergegeben. (orig.)

  12. Comparative Studies of the Operation Method of Solar Energy Water Heating System with Auxiliary Heat Pump Heater%热泵辅助供热太阳能热水系统运行模式对比分析

    Institute of Scientific and Technical Information of China (English)

    林辩启; 罗会龙; 王浩; 田盼雨


    太阳能热水系统与热泵辅助供热合理结合可取长补短,有效降低建筑能耗。简要概述了空气源热泵、水源热泵、地源热泵辅助供热太阳能热水系统的结构形式及其运行模式。在此基础上,对比分析了热泵辅助供热太阳能热水系统各种典型运行模式的特点及其适用的应用环境。%The appropriate combination of solar water heating system and heat pump auxiliary heating is an effective way to reduce the building energy consumption. The structure and operation method of solar water heating system with different auxiliary heating, such as air-source heat pump, water-source heat pump, and soil-source heat pump, were introduced briefly. The characteristics of all kinds of solar water heating system with auxiliary heating were compared and analyzed. The suitable application environment of solar water heating system with auxiliary heating was also presented.

  13. Mining Reclamation Auxiliary Information System Based on GIS%基于GIS的矿区土地复垦辅助信息系统

    Institute of Scientific and Technical Information of China (English)

    许冬; 吴侃; 杨永均


    为满足矿区土地复垦方案编制的实际需要,提高矿区土地复垦的信息化水平,重点解决土地损毁预测、土地复垦适宜性评价、工程量计算和土地复垦相关图件制作等问题,应用GIS、RS和三维数据可视化等技术,实现矿区土地复垦辅助信息系统的设计与开发;借助ArcGIS Engine 、Visual Studio 2008 、ENVI/IDL,将GIS、RS、数学模型和空间数据库等技术相结合,构建了具有较强科学性和通用性,集土地损毁预测、土地复垦评价、规划、监督检查等功能于一体的矿区土地复垦辅助信息系统;通过构建矿区土地复垦辅助信息系统,有助于提高规划的效率和科学性,为我国矿区土地复垦的信息化提供借鉴和参考.%In order to meet the needs of mine land reclamation program development and improve the level of mine land reclamation information technology,this paper focuses on solving land damage prediction,land reclamation suitability assessment,engineering calculation,and land reclamation maps production. The geographic information system,remote sensing and 3D data visualization technology are applied to achieve mining reclamation auxiliary information system. With ArcGIS Engine,Visual Studio 2008,ENVI/IDL,we combined geographic information system,remote sensing and mathematical model with spatial database technology to build a set of land reclamation ancillary information system with strong scientific and versatility performance and functions of land damage prediction,land reclamation evaluation,planning,supervision and inspection. Through constructing a mining reclamation auxiliary information system,the planning efficiency and scientificity are improved,thus providing reference for information technology of mine land reclamation.

  14. Control of Auxiliary System for USC Steam Turbines%超超临界汽轮机辅助系统的控制

    Institute of Scientific and Technical Information of China (English)



    介绍了超超临界汽轮机辅助系统的控制策略,包括本体疏水、抽汽逆止阀、汽封及油系统四个方面的内容。通过详细分析各子系统的控制特点,论证了超超临界汽轮机辅助系统控制的独特性和先进性。掌握这种控制策略,可为新系统开发提供理论参照。%The control strategy including turbine drains ,extraction non‐return valves ,gland seal and oil system for auxiliary system of USC steam turbines is presented .Based on analysis of the control characteristics of each subsystem ,the unique features and advances in this system are demonstrated .The strategy shall be regarded as theoretical reference for developing the new system of USC steam turbines .

  15. Financial issues for hospital auxiliaries. (United States)

    Fogel, L A


    Auxiliaries can serve a more important financial role in today's environment than ever before. Hospitals are searching for positive avenues to promote themselves to the community and to generate more financial support to help offset the losses created by decreasing inpatient utilization and payments from third-party payers. Auxiliaries should recognize that their financial role has never been more important to the financial viability of their hospitals. Auxiliaries should communicate closely with hospital administration so that both organizations work to achieve compatible goals. Auxiliaries should be operated more like businesses, which means establishing goals and objectives, preparing effective budgets and interim financial statements, thinking and planning innovatively, and establishing adequate inventory controls, investment policies, and pricing structures. If auxiliaries follow these steps, they will not only succeed in providing more financial support to hospitals than ever before but will also receive the recognition and support they deserve for their effort.

  16. Ejector Noise Suppression with Auxiliary Jet Injection (United States)

    Berman, Charles H.; Andersen, Otto P., Jr.


    An experimental program to reduce aircraft jet turbulence noise investigated the interaction of small auxiliary jets with a larger main jet. Significant reductions in the far field jet noise were obtained over a range of auxiliary jet pressures and flow rates when used in conjunction with an acoustically lined ejector. While the concept is similar to that of conventional ejector suppressors that use mechanical mixing devices, the present approach should improve thrust and lead to lower weight and less complex noise suppression systems since no hardware needs to be located in the main jet flow. A variety of auxiliary jet and ejector configurations and operating conditions were studied. The best conditions tested produced peak to peak noise reductions ranging from 11 to 16 dB, depending on measurement angle, for auxiliary jet mass flows that were 6.6% of the main jet flow with ejectors that were 8 times the main jet diameter in length. Much larger reductions in noise were found at the original peak frequencies of the unsuppressed jet over a range of far field measurement angles.

  17. Studies on wels catfish (Silurus glanis development during cold season as an auxiliary species in sturgeon recirculated aquaculture systems

    Directory of Open Access Journals (Sweden)

    Radu Muscalu


    Full Text Available The research had the purpose to establish if the wels catfish is suitable for growing in closedrecirculated system designed for sturgeon farming, because during the cold season the system does notneed to reach high temperatures such as for other fish species. Our studies showed that the wels catfishcan survive during the cold season from a recirculated system, and furthermore they accept feeds attemperatures as low as 17°C, and even have a slight body weight increase during this season. The welscatfish entered the spring in our experiment at a mean body weight of 72.5 grams, while the wels catfishfrom semi-intensive system after wintering in earthern ponds entered the winter at a mean body weighof 30 grams. Our experiments also studied the effect of stocking density on fish development in theseconditions.

  18. IOS Auxiliary Color Recognition System for the Color Blind%面向色盲人群的IOS色彩辅助识别系统

    Institute of Scientific and Technical Information of China (English)

    郭华峰; 范渊; 洪年松; 陈兵国


    Color blind is a defect which can't perceive part or all colors correctly. The lack of color discrimination ability brings a lot of inconvenience to color blind's work, study and life. In this article, an auxiliary color recognition system based on IOS is de-signed and implemented, which can convert colors of IOS pictures to colors that color blind can recognize, which will enhance life ex-perience of color blind.%色盲是一种无法正确感知部分或全部颜色的缺陷。由于色盲辨色能力的不足,因此给患者的工作、学习和生活带来了很多的不便。设计并实现了一个基于IOS的色彩辅助识别系统,把IOS照片中的色彩转换成色盲人群可以识别的颜色,从而提高了色盲人群的生活体验。

  19. Connection of auxiliary power supply to the power plant's main instrumentation and control system by way of IEC 61850; Anbindung des elektrischen Kraftwerks-Eigenbedarfs an die Hauptleittechnik mittels IEC 61850

    Energy Technology Data Exchange (ETDEWEB)

    Ciuches, Joerg [RWE Technology GmbH, Essen (Germany). Technical Project Management Project BoA 2 and 3; Wittner, Stephan [RWE Technology GmbH, Essen (Germany). Electrical Engineering


    Based on the positive experience with the integration of control and signalling of the auxiliary power supply switchgear into the I and C system SPPA-T-3000 of Siemens by way of the IEC 61850 protocol in the Neurath power plant F/G project, the concept was further advanced for the power plant new build projects of the Westfalen power plant at Hamm and the Eemshaven power station in the Netherlands. The development aimed to integrate all other components of auxiliary power supply, such as transformers, battery systems as well as rectifiers and inverters, directly into the main I and C system on the basis of the IEC 61850 protocol, apart from the medium-voltage and low-voltage switchgear. (orig.)

  20. WMO Selected, Supplemenatary, Auxiliary Ships (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — World Meteorological Organization International List of Selected, Supplementary and Auxiliary Ships, recognized as Publication 47. 1973-1998 editions, gathered from...

  1. Decommissioning of the ASTRA research reactor: Dismantling the auxiliary systems and clearance and reuse of the buildings

    Directory of Open Access Journals (Sweden)

    Meyer Franz


    Full Text Available The paper presents work performed in the last phase of the decommissioning of the ASTRA research reactor at the Austrian Research Centers Seibersdorf. Dismantling the pump room installations and the ventilation system, as well as the clearance of the buildings is described. Some conclusions and summary data regarding the timetable, material management, and the cost of the entire project are also presented.

  2. Infrared Camera Characterization of Bi-Propellant Reaction Control Engines during Auxiliary Propulsion Systems Tests at NASA's White Sands Test Facility in Las Cruces, New Mexico (United States)

    Holleman, Elizabeth; Sharp, David; Sheller, Richard; Styron, Jason


    This paper describes the application of a FUR Systems A40M infrared (IR) digital camera for thermal monitoring of a Liquid Oxygen (LOX) and Ethanol bi-propellant Reaction Control Engine (RCE) during Auxiliary Propulsion System (APS) testing at the National Aeronautics & Space Administration's (NASA) White Sands Test Facility (WSTF) near Las Cruces, New Mexico. Typically, NASA has relied mostly on the use of ThermoCouples (TC) for this type of thermal monitoring due to the variability of constraints required to accurately map rapidly changing temperatures from ambient to glowing hot chamber material. Obtaining accurate real-time temperatures in the JR spectrum is made even more elusive by the changing emissivity of the chamber material as it begins to glow. The parameters evaluated prior to APS testing included: (1) remote operation of the A40M camera using fiber optic Firewire signal sender and receiver units; (2) operation of the camera inside a Pelco explosion proof enclosure with a germanium window; (3) remote analog signal display for real-time monitoring; (4) remote digital data acquisition of the A40M's sensor information using FUR's ThermaCAM Researcher Pro 2.8 software; and (5) overall reliability of the system. An initial characterization report was prepared after the A40M characterization tests at Marshall Space Flight Center (MSFC) to document controlled heat source comparisons to calibrated TCs. Summary IR digital data recorded from WSTF's APS testing is included within this document along with findings, lessons learned, and recommendations for further usage as a monitoring tool for the development of rocket engines.

  3. 基于SharePoint 2013的认证辅助系统的设计与实现%Design and implementation of certiifcation auxiliary system based on SharePoint 2013

    Institute of Scientific and Technical Information of China (English)



    The article introduces the design and implementation of certification auxiliary system based on SharePoint platform. The project combined SharePoint with traditional authentication mechanism, realized the the certification auxiliary system more easily understand and track, improved the efifciency of the relevant departments, solidiifed the certiifcation application process, improved the quality of the product certiifcation.%文章介绍了基于SharePoint平台的认证辅助系统的设计与实现。该项目将SharePoint与传统的认证机制相结合,实现了更加易于理解和跟踪的认证辅助系统,提高了相关部门的工作效率,固化了认证申请流程,加强了产品认证质量管控。

  4. Solar powered actuator with continuously variable auxiliary power control (United States)

    Nola, F. J. (Inventor)


    A solar powered system is disclosed in which a load such as a compressor is driven by a main induction motor powered by a solar array. An auxiliary motor shares the load with the solar powered motor in proportion to the amount of sunlight available, is provided with a power factor controller for controlling voltage applied to the auxiliary motor in accordance with the loading on that motor. In one embodiment, when sufficient power is available from the solar cell, the auxiliary motor is driven as a generator by excess power from the main motor so as to return electrical energy to the power company utility lines.

  5. A micro-structured 5kW complete fuel processor for iso-octane as hydrogen supply system for mobile auxiliary power units Part I. Development of autothermal reforming catalyst and reactor


    Kolb, Gunther; Baier, Tobias; Schürer, Jochen; Tiemann, David; Ziogas, Athanassios; Ehwald, Hermann; Alphonse, Pierre


    A micro-structured autothermal reformer was developed for a fuel processing/fuel cell system running on iso-octane and designed for an electrical power output of 5kWel. The target application was an automotive auxiliary power unit (APU). The work covered both catalyst and reactor development. In fixed bed screening, nickel and rhodium were identified as the best candidates for autothermal reforming of gasoline. Under higher feed flow rates applied in microchannel testing, a catalyst formul...

  6. Preheating System of Auxiliary Converter for Plateau Type HXD1C Locomotive%高原型HXD1C机车辅助变流器预加热系统

    Institute of Scientific and Technical Information of China (English)

    吴建雄; 陈湘; 钱勇亮


    阐述了高原型HXD1C机车辅助变流器预加热系统及逻辑控制过程,分析了选择加热电阻的方法、设计加热风道的方法以及安装传感器的方法,可为进一步确保辅助变流器在极低温环境下正常稳定运行提供参考。%It illustrated the preheating system of auxiliary converter for plateau type HXD1C locomotive and its logic control process.It analyzed the methods of selecting preheating resistance,designing air-channels and installing sensors,which provided important reference for ensuring that the auxiliary converter could run normally and steadily under the extreme cold condition.

  7. The medical auxiliary in rural Malaysia. (United States)

    Chen, P C


    One of the steps taken by the government to break the cycle of poverty and ill-health in rural Malaysia is the establishment of a rural health service. Initially, the health unit served 50,000 people; it consisted of 1 main health center; 4 health subcenters, and 20 midwife stations. By the end of 1970, 44 main health centers, 180 health subcenters, and 943 midwife stations were in operation, creating a great demand for all types of health personnel: professional, paramedical, and auxiliary. Doctors are unevenly distributed in West Malaysia: in urban areas, the ratio of doctors to population is 1 to 1500; in rural areas, the ratio is 1 to 25,000. Paramedicals are unevenly distributed too. The scarcity of professionals in rural areas is attributed to professionals' demand for high salaries and the corresponding requirement of professional and social settings which rural areas cannot provide. The rural health unit utilized the tiered pyramidal system for staffing, with heavy reliance on auxiliary personnel. This system enabled the rapid expansion of rural health services, helping reach over a third of the population in just 15 years. As a consequence, infant, toddler and maternal mortality rates declined substantially. Traditional birth attendants, or kampong bidans, are currently being trained, on an experimental basis, simple principles of hygiene and family planning. With the enforcement of the Midwives Act in 1971, indigenous midwives have not been permitted to register as legitimate midwives and are now subject to supervision by health authorities. Future plans include retraining single-purpose midwives in child health and nursing, and giving all assistant nurses midwifery training. The aim is to make these 2 auxiliaries multipurpose community nurse-midwives. Experiences of developed countries show that demand for auxiliaries will continue to increase with the growth of professional personnel.

  8. Novel Chiral Auxiliaries of BIAZOLs

    Institute of Scientific and Technical Information of China (English)

    CHEN; Arh-Hwang


    Asymmetric catalysis is one of the most challenging and formidable endeavor in organic synthesis. The development of chiral auxiliaries is a key in the asymmetric catalysis. Azulenoids, a parent structure of bicyclo[5.3.0]decapentaene with 10 πelectrons, are useful as dye materials, medical treatment of inflammation and hypertension, and the development of liquid crystals. In continuing to investigate synthetic application of azulenoids, we have studied to develop novel chiral auxiliaries of BIAZOLs. The BIAZOLs were synthesized from dicyclopentadiene and characterized using spectroscopies.  ……

  9. Novel Chiral Auxiliaries of BIAZOLs

    Institute of Scientific and Technical Information of China (English)

    CHEN Arh-Hwang; YUAN Shou-Bin; CHIU Shu-Ching


    @@ Asymmetric catalysis is one of the most challenging and formidable endeavor in organic synthesis. The development of chiral auxiliaries is a key in the asymmetric catalysis. Azulenoids, a parent structure of bicyclo[5.3.0]decapentaene with 10 πelectrons, are useful as dye materials, medical treatment of inflammation and hypertension, and the development of liquid crystals. In continuing to investigate synthetic application of azulenoids, we have studied to develop novel chiral auxiliaries of BIAZOLs. The BIAZOLs were synthesized from dicyclopentadiene and characterized using spectroscopies.

  10. 浅谈神华亿利黄玉川煤矿副立井提升系统%The Lift System of Auxiliary Shaft of Huangyuchuan Mine Shenhua Yili

    Institute of Scientific and Technical Information of China (English)



    介绍了黄玉川煤矿副井提升机的主要结构、性能和大罐笼的特点,液压制动系统,锁罐装置的优点,重点阐述了提升机电控系统的设计原则和系统特点。%The article introduced the main structure and performance of the life system of auxiliary shaft of Huangyuchuan mine,feature of large cage,hydraulic brake system and advantage of cage locker device.The design principle and system feature of the power cont

  11. The auxiliary protein complex SaePQ activates the phosphatase activity of sensor kinase SaeS in the SaeRS two-component system of Staphylococcus aureus


    Jeong, Do-Won; Cho, Hoonsik; Jones, Marcus B.; Shatzkes, Kenneth; Sun, Fei; Ji, Quanjiang; Liu, Qian; Scott N Peterson; He, Chuan; Bae, Taeok


    In bacterial two-component regulatory systems (TCSs), dephosphorylation of phosphorylated response regulators is essential for resetting the activated systems to the pre-activation state. However, in the SaeRS TCS, a major virulence TCS of Staphylococcus aureus, the mechanism for dephosphorylation of the response regulator SaeR has not been identified. Here we report that two auxiliary proteins from the sae operon, SaeP and SaeQ, form a protein complex with the sensor kinase SaeS and activate...

  12. A reliability centered maintenance model applied to the auxiliary feedwater system of a nuclear power plant; Um modelo de manutencao centrada em confiabilidade aplicada ao sistema de agua de alimentacaco auxiliar de uma usina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Jefferson Borges


    The main objective of maintenance in a nuclear power plant is to assure that structures, systems and components will perform their design functions with reliability and availability in order to obtain a safety and economic electric power generation. Reliability Centered Maintenance (RCM) is a method of systematic review to develop or optimize Preventive Maintenance Programs. This study presents the objectives, concepts, organization and methods used in the development of RCM application to nuclear power plants. Some examples of this application are included, considering the Auxiliary Feedwater System of a generic two loops PWR nuclear power plant of Westinghouse design. (author)

  13. Decontamination of the reactor pressure vessel and further internals and auxiliary systems in the German boiling water reactor Isar-1; Dekontamination des RDB inkl. der Einbauten wie Dampftrockner und Wasserabscheider sowie der angeschlossenen Hilfssysteme im deutschen Siedewasserreaktor ISAR 1

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Michael; Sempere Belda, Luis; Basu, Ashim; Topf, Christian [AREVA GmbH, Erlangen (Germany). Abt. Chemistry Services; Erbacher, Thomas; Hiermer, Thomas; Schnurr, Bernhard; Appeldorn, Thomas van [E.ON Kernkraft GmbH, Kernkraftwerk ISAR, Essenbach (Germany). Abt. Maschinentechnik; Volkmann, Christian [ESG Engineering Services GmbH, Greifswald (Germany)


    The German nuclear power plant ISAR 1 (KKI 1), a 878 MWe boiling water reactor of KWU design, was shut down on March 17{sup th}, 2011. With the objective to minimize the plants activity inventory accompanied by the reduction of contact dose rates of systems and components the project 'decontamination of the RPV incl. steam dryer and water separator and the connected auxiliary systems' was implemented in the first quarter of 2015. One major focus within the project was the specific in-situ decontamination of the steam dryer.

  14. 30 CFR 57.6161 - Auxiliary facilities. (United States)


    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Auxiliary facilities. 57.6161 Section 57.6161...-Underground Only § 57.6161 Auxiliary facilities. (a) Auxiliary facilities used to store explosive material near work places shall be wooden, box-type containers equipped with covers or doors, or...

  15. 7 CFR 15b.37 - Auxiliary aids. (United States)


    ... 7 Agriculture 1 2010-01-01 2010-01-01 false Auxiliary aids. 15b.37 Section 15b.37 Agriculture... ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Other Aid, Benefits, or Services § 15b.37 Auxiliary aids... appropriate auxiliary aids to persons with impaired sensory, manual, or speaking skills, where necessary...

  16. 45 CFR 707.10 - Auxiliary aids. (United States)


    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Auxiliary aids. 707.10 Section 707.10 Public Welfare Regulations Relating to Public Welfare (Continued) COMMISSION ON CIVIL RIGHTS ENFORCEMENT OF... § 707.10 Auxiliary aids. (a) The Agency shall furnish appropriate auxiliary aids where necessary...

  17. 47 CFR 73.1675 - Auxiliary antennas. (United States)


    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Auxiliary antennas. 73.1675 Section 73.1675... Rules Applicable to All Broadcast Stations § 73.1675 Auxiliary antennas. (a)(1) An auxiliary antenna is one that is permanently installed and available for use when the main antenna is out of service...

  18. Auxiliary engine digital interface unit (DIU) (United States)


    This auxiliary propulsion engine digital unit controls both the valving of the fuel and oxidizer to the engine combustion chamber and the ignition spark required for timely and efficient engine burns. In addition to this basic function, the unit is designed to manage it's own redundancy such that it is still operational after two hard circuit failures. It communicates to the data bus system several selected information points relating to the operational status of the electronics as well as the engine fuel and burning processes.

  19. Auxiliary-model-based stochastic Newton recursive identification for dual-rate system%双率系统辅助模型框架下的随机牛顿递推辨识

    Institute of Scientific and Technical Information of China (English)

    曹鹏飞; 罗雄麟


    An auxiliary-model-based improved stochastic Newton recursive algorithm is utilized to identify the output-error model for the dual-rate system. The output estimations at the time between two slow-sampled periods will diverge when the unstable estimated system arises and the identification process will cease. Therefore, a nonlinear model is proposed as the sub-auxiliary model. Together with the general auxiliary model, the proposed model provides estimated information for the next recursion. When the input is not general enough, the Hessian matrix will be singular or nearly singular. A positive definite symmetric matrix is added to the recursion for Hessian matrix to ensure it positive definite. Finally, the uniform convergence of the proposed algorithm is proved.%针对双率系统,采用基于辅助模型的改进随机牛顿递推算法辨识输出误差模型。若当前参数估计对应的估计系统不稳定,则出现中间不可测时刻输出估计发散,辨识过程停止。增加非线性模型与常规辅助模型一起为下步递推提供信息估计,确保递推进行。为避免出现输入不充分或者广泛时Hessian阵奇异或者接近奇异的情况,在Hessian阵的递推中增加对称正定矩阵。最后给出了所提出辨识算法的一致收敛性证明。

  20. Auxiliary Library Explorer (ALEX) Development (United States)


    prototype tool motivated by Google Scholar which uses the DST Group for-official-use-only (FOUO) internal report database as its input. It provides DST...DST Group internal report database . The major output of the scholarship is the Auxiliary Library Explorer (ALEX) which is, at the time of writing...Bunting. ALEX is a prototype tool motivated by Google Scholar which uses the DST Group for-official-use-only (FOUO) internal report database as its

  1. History of Sandia National Laboratories` auxiliary closure mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Weydert, J.C. [Sandia National Labs., Albuquerque, NM (United States); Ponder, G.M. [Geo-Centers, Inc., Albuquerque, NM (United States)


    An essential component of a horizontal, underground nuclear test setup at the Nevada Test Site is the auxiliary closure system. The massive gates that slam shut immediately after a device has been detonated allow the prompt radiation to pass, but block debris and hot gases from continuing down the tunnel. Thus, the gates protect experiments located in the horizontal line-of-sight steel pipe. Sandia National Laboratories has been the major designer and developer of these closure systems. This report records the history of SNL`s participation in and contributions to the technology of auxiliary closure systems used in horizontal tunnel tests in the underground test program.

  2. Renewal of the auxiliary blower system NAL 2m{times}2m transonic wind tunnel; 2m{times}2m sen`onsoku fudoyo hojo sofuki setsubi no koshin

    Energy Technology Data Exchange (ETDEWEB)

    Karasawa, T.; Suenaga, H.; Suzuki, M.; Komatsu, Y.; Toda, N. [National Aerospace Laboratory, Tokyo (Japan)


    This paper describes an outline of a replaced auxiliary blower system for NAL 2m{times}2m transonic wind tunnel, and effects of its renewal. Based on the guideline of renewal of facilities, the bleed air flow was controlled by the whole step stator blade control method of main body of the blower, and a blower with a capacity adjustment function was equipped. Downsizing was planned by adopting an accelerator and a drive motor having their rated maximum power of 8,000 kW, which increased the number of revolution to 1.5 times. The protective function for antisurging control of the blower was enhanced by the by-pass control valve, which provided the auxiliary function for the Mach number control. The new valve was downsized to 6/7 in the bore diameter due to the reduction of by-pass air flow compared with the previous valve. Results of the present renewal are as follows. By the function recovery, tests in the Mach number up to 1.4 can be conducted under the total pressure of collecting drum, 120 kPa. Furthermore, energy saving, automatic control of the Mach number, operation and monitoring by the centralized processing, and high efficiency of operation were achieved. 6 refs., 25 figs., 1 tab.

  3. A short note on gravity with tensor auxiliary fields

    CERN Document Server

    Bañados, Máximo


    We consider gravity coupled to a second metric in the strong coupling limit, where the second kinetic term is absent. This system belongs to the recently discussed class of models of "gravity with auxiliary fields" by Pani et al. We prove that, in vacuum, these theories are always equivalent to GR with a cosmological constant, even in the case where the auxiliary field equations contain identities leaving undetermined functions. In the situation where some functions are undetermined, the actual value of the cosmological constant is dictated by an initial condition, and not by the parameters in the action.

  4. 燃料电池汽车空辅系统噪声有源控制技术%Active Noise Control Technology of Air Auxiliary System in Fuel Cell Vehicles

    Institute of Scientific and Technical Information of China (English)

    胡佳杰; 左曙光; 何吕昌; 张孟浩


      燃料电池汽车(FCV)的动力系统及噪声特性与传统汽车相比有着很大差异,其中空气辅助系统已成为主要的噪声源。虽然有源噪声控制(ANC)是近年来的研究热点;但是,由于噪声源与环境的时变性,对空辅系统的中低频段噪声更有效的对策是使用自适应有源噪声控制技术(AANC)。在归纳总结有源噪声控制技术的发展进程及基本原理的基础上,阐述近年来有源噪声控制的研究现状,并重点分析关注自适应算法的研究进展;由此对自适应有源噪声控制在燃料电池汽车空辅系统减振降噪方面的应用前景进行预测和展望。%The power system and its noise characteristic of Fuel Cell Vehicle (FCV) are quite different from those of traditional cars. In FCV, the air auxiliary system becomes one of the main noise sources. In recent years, active noise control (ANC) has become a research focus. It has advantages for the traditional passive noise control in middle-and low-frequency range. However, because of the time-variation property of noise sources and environments, it is necessary to use adaptive active noise control (AANC) in middle-and low-frequency noise control of the air auxiliary system in FCV. In this paper, the development progress of ANC technology was summarized, and the research of ANC in recent years was expatiated. Analysis was focused on the research progress of adaptive algorithm. Finally, the prospect of the ANNC application in the field of vibration and noise reduction of the air auxiliary system in FCV was forecasted.

  5. Auxiliary-field quantum Monte Carlo methods in nuclei

    CERN Document Server

    Alhassid, Y


    Auxiliary-field quantum Monte Carlo methods enable the calculation of thermal and ground state properties of correlated quantum many-body systems in model spaces that are many orders of magnitude larger than those that can be treated by conventional diagonalization methods. We review recent developments and applications of these methods in nuclei using the framework of the configuration-interaction shell model.

  6. Development of an auxiliary system for the execution of vascular catheter interventions with a reduced radiological risk; system description and first experimental results. (United States)

    Placidi, Giuseppe; Franchi, Danilo; Marsili, Luca; Gallo, Pasquale


    Vascular catheterization is a common procedure in clinical medicine. It is normally performed by a specialist using an X-ray fluoroscopic guide and contrast-media. In the present paper, an image-guided navigation system which indicates a path providing guidance to the desired target inside the vascular tree is described with the aim of reducing the exposure of personnel and patients to X-rays during the catheterization procedure. A 3D model of the patient vascular tree, reconstructed with data collected by an angiography before starting the intervention, is used as a guide map instead of fluoroscopic scans. An accurate spatial correspondence between the body of the patient and the 3D reconstructed vascular model is established and, by means of a position indicator installed over the catheter tip, the real-time position/orientation of the tip is indicated correctly. This paper describes the system and the operational procedures necessary to use the proposed method efficiently during a catheter intervention. Preliminary experimental results on a phantom are also reported.

  7. Design of a Wide-input Auxiliary Power Supply in the PV Inverter System%一种光伏并网系统用的宽输入辅助电源设计

    Institute of Scientific and Technical Information of China (English)

    胡天友; 张晓博; 王海; 刘洋


    根据光伏并网逆变系统的供电需求,设计了一种120 ~ 850 V宽输入的辅助电源.为防止在输入电压过高时丢失开通脉冲,在传统的单端反激式拓扑电路的基础上加入了变频电路.输入电压升高时,降低开关频率,保证导通时间大于开关管的最小导通时间,实现了宽输入范围电压的要求.采用DCM工作模式,峰值电流控制,在反馈电路中加入了2型补偿网络,保证了输出电压快速调节性和稳定性.样机实验结果表明,该电源能够适应输入电压在大范围波动,可靠地为光伏并网实验系统供电.%According to the requirement of the PV grid-connected inverter system, an auxiliary power supply with an input voltage of 120 -850 V is designed. To avoid losing the opening pulse at a high input voltage, a circuit that can change switching frequency based on the input voltage is introduced. The peak current control and DCM work mode is used, and the type-2 compensation circuit in the feedback loop guarantees the rapid adjustment of output voltage and stability of the system. Experimental results show that this auxiliary power supply can adapt to a wide fluctuation of input voltage and provide long-term reliable DC voltage to the PV system.

  8. 机车辅助供电系统状态在线检测系统设计与实现%Design and implementation of Locomotive Auxiliary Power System of State-line Inspection System

    Institute of Scientific and Technical Information of China (English)



    As a back-up power supply of locomotive control circuit, VRLA was to ensure the defense for the normal operation of locomotive equipment. In order to protect the batteries work, it was designed and implemented a Locomotive Auxiliary Power System of State-line Detection System. The System could detect the battery status of work by the ratio of voltage difference and time difference, which was able to real-time monitor the battery. Data was stored in the U disk through the USB module. In order to establish the appropriate management and maintenance files, it could be used host computer software to analyze the data and find faulty batteries timely. It might be ensure the normal use of locomotive of great significance.%免维护铅酸蓄电池作为机车控制电路的后备电源,是确保机车各项设备正常运行的一道防线.为保障蓄电池正常工作,设计并实现一种机车辅助供电系统状态在线检测系统.该系统通过电压差与时间差的比值来检测蓄电池的工作状况,实时监控蓄电池,并且通过USB模块将数据储存在U盘中,利用上位机软件对数据进行分析,建立相应的管理维修档案,及时找出故障电池,对确保机车的正常运用具有十分重要的意义.

  9. 78 FR 27321 - Revision of Auxiliary Regulations (United States)


    ...) (``The 1996 Act'') authorizing the Auxiliary organizational structure, extending civil liability..., status, and role in Coast Guard operations, and update provisions on liability protection for Auxiliary... Private Property H. Civil Justice Reform I. Protection of Children J. Indian Tribal Governments K....

  10. Orthodontic springs and auxiliary appliances: assessment of magnetic field interactions associated with 1.5 T and 3 T magnetic resonance systems

    Energy Technology Data Exchange (ETDEWEB)

    Kemper, J.; Priest, A.N.; Adam, G. [University Medical Center of Hamburg-Eppendorf, Clinic of Diagnostic and Interventional Radiology, Hamburg (Germany); Schulze, D. [University Hospital of Freiburg, Department of Oral and Maxillofacial Surgery, Freiburg (Germany); Kahl-Nieke, B.; Klocke, A. [University Medical Center of Hamburg-Eppendorf, Department of Orthodontics, Hamburg (Germany)


    The objective of this paper is to evaluate magnetic field interactions at 1.5 and 3 T for 20 orthodontic devices used for fixed orthodontic therapy. Twenty springs and auxiliary parts made from varying ferromagnetic alloys were tested for magnetic field interactions in the static magnetic field at 1.5 and 3 T. Magnetic translational force F{sub z} (in millinewtons) was evaluated by determining the deflection angle {beta} [American Society for Testing and Materials (ASTM standard test method)]. Magnetic-field-induced rotational force F{sub rot} was qualitatively determined using a five-point scale. {beta} was found to be >45 in 13(15) devices at 1.5(3) T and translational force F{sub z} exceeded gravitational force F{sub g} on the particular object [F{sub z} 10.17-261.4 mN (10.72-566.4 mN) at 1.5(3) T]. F{sub z} was found to be up to 24.1(47.5)-fold higher than F{sub g} at 1.5(3) T. Corresponding to this, F{sub rot} on the objects was shown to be high at both field strengths ({>=} +3). Three objects (at 1.5 T) and one object (at 3 T) showed deflection angles <45 , but F{sub rot} was found to be {>=} +3 at both field strengths. For the remaining objects, {beta} was below 45 and torque measurements ranged from 0 to +2. Of 20 objects investigated for magnetic field interactions at 1.5(3) T, 13(15) were unsafe in magnetic resonance (MR), based on the ASTM criteria of F{sub z}. The implications of these results for orthodontic patients undergoing MRI are discussed. (orig.)

  11. 辅助轴承系统轴向弹性冲击阻尼器的设计与仿真研究%Design and Simulation Research of the Axial Impact Dampers in Auxiliary Bearing System

    Institute of Scientific and Technical Information of China (English)

    康骁; 杨国军; 于溯源


    针对立式磁悬浮转子跌落后对辅助轴承产生较大轴向冲击这一问题,设计加装了相应轴向弹性阻尼器以及径向弹性阻尼器,通过相关阻尼器的压缩变形以及剪切变形储存冲击能量,从而将尖锐的冲击波以较缓和的形式作用在设备上,以达到对辅助轴承以及磁轴承系统的保护作用。通过LS-DYNA动力学仿真软件对未加装以及加装阻尼器两种情况下的跌落工况进行了仿真分析,分别得到了两种情况下的轴向轴心位移曲线,以及第一次冲击峰值时刻的MISES应力云图,并分析了该过程中阻尼器的受力及变形情况。仿真结果表明:添加阻尼器对于减小辅助轴承受力以及减小转子轴向弹跳有着良好效果,同时冲击也不会造成阻尼器的损坏,继而为辅助轴承弹性阻尼器的设计及工程应用提供了一定的理论参考。%Aiming at the problem of large axial impact on the auxiliary bearing during the vertical active magnetic bearing (AMB)systems rotor drop,the axial spring damper and radial spring damper were designed and added accordingly. The impact power was absorbed by the compression deformation and shear deformation of related dampers,consequently,the sharp impact wave was made mildly acting on the device,which was considered to be a good way to protect the auxiliary bearings and the AMB system from damage. Both working conditions of rotor drop,one was added with dampers and the other was not,were analyzed with simulation by using the LS-DYNA dynamic simulation software. The MISES stress nephogram when the peak inflation occurred during the first impact and the axial axes displacement curve during rotor drop in both conditions were obtained separately. Moreover the stress suffered and deforma-tion instance of dampers during this process were analyzed. The simulation results show that adding the dampers can efficiently reduce the stress suffered by the auxiliary

  12. New Developments in Auxiliary Heating (United States)

    Norreys, Peter


    The role of heating arising from the propagation of orthogonal petawatt-laser driven relativistic electron beams in dense plasma will be discussed. The energy cascade mechanism begins first with the rapid growth at 45 degrees to the two beams of electrostatic waves near the electron plasma frequency. These waves reach high amplitudes and break, which then results in the generation of a strongly driven turbulent Langmuir spectrum. Parametric decay of these waves, particularly via the modulational instability, then gives rise to a coupled turbulent ion acoustic spectrum. The resulting waves also give rise to ion heating through collisions via equilibration of both electrons and ions. In this talk, I will present the most recent analytic modelling, and particle-in-cell / Vlasov-Poisson simulation results from my team within Oxford Physics and the Central Laser Facility that explores the optimum parameter space for this process, focusing in particular on the requirements for auxiliary heating of the central hot spot in inertial confinement fusion target experiments. I will also describe new methods for hole-boring through the coronal plasma surrounding the fuel using strongly relativistic laser beams that demonstrates the strong suppression of the hosing instability under these conditions. Proof-of-concept experiments are under design for the Orion and OMEGA EP facilities.

  13. One cutting plane algorithm using auxiliary functions (United States)

    Zabotin, I. Ya; Kazaeva, K. E.


    We propose an algorithm for solving a convex programming problem from the class of cutting methods. The algorithm is characterized by the construction of approximations using some auxiliary functions, instead of the objective function. Each auxiliary function bases on the exterior penalty function. In proposed algorithm the admissible set and the epigraph of each auxiliary function are embedded into polyhedral sets. In connection with the above, the iteration points are found by solving linear programming problems. We discuss the implementation of the algorithm and prove its convergence.

  14. H(curl) Auxiliary Mesh Preconditioning

    Energy Technology Data Exchange (ETDEWEB)

    Kolev, T V; Pasciak, J E; Vassilevski, P S


    This paper analyzes a two-level preconditioning scheme for H(curl) bilinear forms. The scheme utilizes an auxiliary problem on a related mesh that is more amenable for constructing optimal order multigrid methods. More specifically, we analyze the case when the auxiliary mesh only approximately covers the original domain. The latter assumption is important since it allows for easy construction of nested multilevel spaces on regular auxiliary meshes. Numerical experiments in both two and three space dimensions illustrate the optimal performance of the method.

  15. Ozonation of Common Textile Auxiliaries (United States)

    Iskender, Gulen; Arslan-Alaton, Idil; Koyunluoglu, Sebnem; Yilmaz, Zeynep; Germirli Babuna, Fatos


    The treatability of four different commonly applied textile auxiliary chemicals, namely two tannin formulations (Tannin 1: a condensation product of aryl sulphonate; Tannin 2: natural tannic acid) and two biocidal finishing agents (Biocide 1: 2,4,4’-trichloro-2’- hydroxydiphenyl ether; Biocide 2: a nonionic diphenyl alkane derivative) with ozone was investigated. Increasing the ozone dose yielded higher COD removals for the natural tannin. Optimum ozone doses of 485 and 662 mg/h were obtained at a pH of 3.5 for natural and synthetic tannin carrying textile bath discharges, respectively. When the reaction pH was increased from 3.5 to 7.0, a slight decrease in COD removal was observed for the natural tannin due to ozone selectivity towards its polyaromatic structure. The same increase in ozonation pH enhanced COD removals for the synthetic tannin as a result of enhanced ozone decomposition rendering free radical chain reactions dominant. Optimum ozone doses of 499 and 563 mg/h were established for Biocide 1 and 2, respectively. With the increase of ozonation, pH exhibited a positive influence on COD removals for both textile tannins. A substantial improvement in terms of TOC removals was observed as the reaction pH was increased from 3.5 to 7.0 for the synthetic tannin, and from 7 to 12 for both textile biocides. Higher AOX removals were evident at pH 7 than at pH 12 for Biocide 1 as a result of the higher selectivity of the dehalogenation reaction at neutral pH.

  16. Participation of Empresarios Agrupados in engineering of the Tokamak systems and auxiliary buildings; Participacion de Empresarios Agrupados en la Ingenieria de los sistemas de tokamak y edificios auxiliares

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez del Palacio, V.


    The Architect Engineering works comprise approximately the design of 32 buildings and structures, some of them very simple and others extremely complex. 32 buildings include nuclear buildings, as the Toyama, tritium, or the building of emergency diesel and buildings conventional and the building of the site services. Systems including those related to systems within a building they reach conventional, while interfaces with process systems are countless. Grouped entrepreneurs led the design of the mechanical (PBS65) systems and Electric (PBS43) actively participating in the design of systems of fire proofing of buildings and site. During the development of engineering accident of Fukushima works directly affect in the design of the systems.

  17. 核电厂辅助冷却水系统水锤计算与防护%Water Hammer Calculation and Prevention of Auxiliary Cooling Water System in Nuclear Power Plant

    Institute of Scientific and Technical Information of China (English)

    王学华; 熊兴才; 薛海青


    对核电厂常规岛辅助冷却水系统由板式换热器改为管壳式换热器并取消升压泵的方案特点进行了定性分析,指出了系统方案改进后的辅助冷却水系统正常停运时会产生水锤现象。通过对辅助冷却水系统建模定量计算了循环水泵停泵工况时的水锤最大压力,提出了通过调整阀门关闭时间消除水锤现象的防护方案并进行了计算验证。%ABSTRACT:This paper,first of all,qualitatively analyzes the characteristic of the auxiliary cooling water system of the conventional island of the nuclear power plant which uses the tube heater instead of the plate heater,pointing out that water hammer phenomena may be caused in the improved system. The maximum pressure of the water hammer when the circulating water pump is shut down is simulated and calculated. Finally the paper proposes the water hammer prevention solution of regulating the valve closing time and certifies the scheme by calculation.

  18. Cooperative Handover Algorithm Based on Auxiliary Carrier in LTE-Advanced Relay System%LTE-Advanced中继系统基于辅助载波的协作切换算法

    Institute of Scientific and Technical Information of China (English)

    赵季红; 何炜扬; 曲桦


    切换是移动性管理的重要组成部分.在LTE-Advanced系统中,由于中继、载波聚合等新技术的引入,给系统的切换机制提出了更高的要求和挑战.通过对传统LTE-Advanced系统和LTE-Advanced中继系统切换过程的分析,提出了LTE-Advanced中继系统基于辅助载波的协作切换算法.该算法利用低频载波传播范围广、高频载波资源相对较多的优势,并结合中继技术和载波聚合技术,达到了降低切换中断概率、提高系统吞吐量的目的.%Handover is one of the most important parts in mobility management.In the LTE-Advanced system,more new technologies such as relay and carrier aggregation and so on were introduced,which put forward higher requirements and challenges to the handover mechanism of system.The handover process of the traditional LTE-Advanced system and LTE-Advanced relay system were analyzed,the cooperative handover algorithm based on auxiliary carrier in LTE-Advanced relay system was proposed.This algorithm makes use of the advantages of wide spreading of low-frequency carrier and rich resources of high-frequency carrier,and in conjunction with relay technology and carrier aggregation technology,achieving the purpose of reducing the handover outage probability and improving the throughput of the system.

  19. Auxiliary Density Matrix Methods for Hartree-Fock Exchange Calculations. (United States)

    Guidon, Manuel; Hutter, Jürg; VandeVondele, Joost


    The calculation of Hartree-Fock exchange (HFX) is computationally demanding for large systems described with high-quality basis sets. In this work, we show that excellent performance and good accuracy can nevertheless be obtained if an auxiliary density matrix is employed for the HFX calculation. Several schemes to derive an auxiliary density matrix from a high-quality density matrix are discussed. Key to the accuracy of the auxiliary density matrix methods (ADMM) is the use of a correction based on standard generalized gradient approximations for HFX. ADMM integrates seamlessly in existing HFX codes and, in particular, can be employed in linear scaling implementations. Demonstrating the performance of the method, the effect of HFX on the structure of liquid water is investigated in detail using Born-Oppenheimer molecular dynamics simulations (300 ps) of a system of 64 molecules. Representative for large systems are calculations on a solvated protein (Rubredoxin), for which ADMM outperforms the corresponding standard HFX implementation by approximately a factor 20.

  20. Robust video transmission with distributed source coded auxiliary channel. (United States)

    Wang, Jiajun; Majumdar, Abhik; Ramchandran, Kannan


    We propose a novel solution to the problem of robust, low-latency video transmission over lossy channels. Predictive video codecs, such as MPEG and H.26x, are very susceptible to prediction mismatch between encoder and decoder or "drift" when there are packet losses. These mismatches lead to a significant degradation in the decoded quality. To address this problem, we propose an auxiliary codec system that sends additional information alongside an MPEG or H.26x compressed video stream to correct for errors in decoded frames and mitigate drift. The proposed system is based on the principles of distributed source coding and uses the (possibly erroneous) MPEG/H.26x decoder reconstruction as side information at the auxiliary decoder. The distributed source coding framework depends upon knowing the statistical dependency (or correlation) between the source and the side information. We propose a recursive algorithm to analytically track the correlation between the original source frame and the erroneous MPEG/H.26x decoded frame. Finally, we propose a rate-distortion optimization scheme to allocate the rate used by the auxiliary encoder among the encoding blocks within a video frame. We implement the proposed system and present extensive simulation results that demonstrate significant gains in performance both visually and objectively (on the order of 2 dB in PSNR over forward error correction based solutions and 1.5 dB in PSNR over intrarefresh based solutions for typical scenarios) under tight latency constraints.

  1. Multi-innovation Extended Stochastic Gradient Algorithm Based on an Auxiliary Model for MISO Systems%MISO系统辅助模型多新息增广随机梯度算法

    Institute of Scientific and Technical Information of China (English)

    赵学良; 肖永松


    For mnltiple-input single-output (MISO) output-error systems, estimates from the conventional recursive least squares parameter identification method are biased. In order to euhanlce accuracy and speed of convergence for stochastic gradient identification algorithm, an auxiliary model based multi-innovation extended stochastic gradient (AM-MI-ESG) algorithm is presented by replacing the unknown unmeasurable variables in the information vector with the outputs of the auxiliary model, and introducing the innovation length and expanding the scalar innovation to an innovation vector. The AM-M1-ESG algorithm uses not only the current data and innovation but also the past data and innovation at each iteration, thus the parameter estimation accuracy and convergence rate can be improved. The simulation results show that the proposed algorithm is effective.%对于有色噪声干扰的输出误差多输入单输出(MISO)系统,常规的递推最小二乘辨识方法给出的参数估计是有偏的.为了提高随机梯度辨识方法的收敛精度和速度,用辅助模型的输出代替辨识模型信息向量中的未知不可测变量,推导出其辅助模型增广随机梯度辨识算法;再引入新息长度扩展标量新息为新息向量,提出了基于辅助模型的MISO系统多新息增广随机梯度辨识算法.所得算法在每一次的迭代中不仅使用了当前数据和新息,而且使用了过去数据和新息,提高了参数估计精度和收敛速度.仿真例子验证了算法的有效性.

  2. Orbiter Auxiliary Power Unit Flight Support Plan (United States)

    Guirl, Robert; Munroe, James; Scott, Walter


    This paper discussed the development of an integrated Orbiter Auxiliary Power Unit (APU) and Improved APU (IAPU) Flight Suuport Plan. The plan identifies hardware requirements for continued support of flight activities for the Space Shuttle Orbiter fleet. Each Orbiter vehicle has three APUs that provide power to the hydraulic system for flight control surface actuation, engine gimbaling, landing gear deployment, braking, and steering. The APUs contain hardware that has been found over the course of development and flight history to have operating time and on-vehicle exposure time limits. These APUs will be replaced by IAPUs with enhanced operating lives on a vehicle-by-vehicle basis during scheduled Orbiter modification periods. This Flight Support Plan is used by program management, engineering, logistics, contracts, and procurement groups to establish optimum use of available hardware and replacement quantities and delivery requirements for APUs until vehicle modifications and incorporation of IAPUs. Changes to the flight manifest and program delays are evaluated relative to their impact on hardware availability.

  3. CEFR 整体冷钠池及其辅助系统温度场三维数值模拟%Temperature Field Numerical Simulation of Integrative Cold Sodium Pool and Auxiliary System of CEFR

    Institute of Scientific and Technical Information of China (English)

    冯预恒; 赵勇; 周志伟; 刘一哲; 杨红义


    利用流体力学软件CFX对中国实验快堆(CEFR)整体冷钠池及其辅助系统进行详细稳态模拟计算,并验证运行工况下的热工设计。计算结果表明:冷钠池内存在热分层和热分区现象,确实存在冷钠池上板的高温区,同时泵腔室上部的温度较其他区域的高。本工作为反应堆功率提升及运行提供了技术准备。%Using code CFX ,the integrative cold sodium pool and auxiliary system of CEFR was calculated at steady state case and the thermal design was verified at operation case .T he results show that there are thermal stratification phenomena in the cold sodium pool ,there exists really the high temperature region at the upper board of the cold sodium pool ,and the temperature in the upper zone of bump inhaling plenum is higher than that of other regions .The results provide technical preparation for power up and operation of CEFR .

  4. 传染病上报辅助管理系统的设计与实现%Design and realization of infectious diseases reporting auxiliary management system

    Institute of Scientific and Technical Information of China (English)

    崔菲菲; 万振; 刘晓龙


    目的:设计医院传染病上报辅助管理系统,以保证传染病上报数据的准确性.方法:基于医院信息系统(hospital information system,HIS)、实验室信息系统(laboratory information system,LIS)、影像归档和通信系统(picturearchiving and communication systems,PACS)、电子病历系统(electronic medical record system,EMRS)、体检系统等系统数据库,利用Visual Studio 2008开发工具,使用C#编程语言,将数据集成到本地服务器并进行二次开发.结果:改进了传统的传染病上报数据采集的模式,节省了时间,提高了工作效率.结论:经过一段时间的运行,该方案可行,系统运行稳定.

  5. Auxiliary Power Systems: Conference Proceedings of the Propulsion and Energetics Panel B Specialists’ Meeting (61st) Held at Copenhagen, Denmark on 30-31 May 1983 (United States)


    flight -nvelope nnd during critical flight manoeu’,ers (engine surge/ stall with possible lame out). Re dash No. 3: The only eligible source could be a...decrease compresor efficiency 2.5 pnrcant and turbine effi- riency 1.5 percent. Maintaining gap-to-height ratios may prove impractical to the...AIRCRAFT HEAIIN(, SYSTEM I-) ANGLE Of LOAD COMRESSOR INLET VANES FigUr. 9 bin OEM -:-- -r-I I IV TYPICAf CURVE OF THE LOAD COMPRESOR REGULATION

  6. Advanced technology components for model GTP305-2 aircraft auxiliary power system. Final report 6 May 75-15 Jul 79

    Energy Technology Data Exchange (ETDEWEB)

    Kidwell, J.R.; Large, G.D.


    The GTP305-2 Advanced APU is a single shaft, all shaft power engine incorporating an axial-centrifugal compressor, a reverse flow annular combustor and a radial-axial turbine. Cycle analyses indicated a 10-percent high pressure compressor flow increase improved matching characteristics with the low pressure compressor. The combustion system is a reverse flow annular combustor with an air-assist/airblast fuel injection system. The radial-axial turbine stage is characterized by an integrally cast turbine rotor and a cast exhaust duct assembly. The Integrated Components Assembly (ICA) rig consists of the combustor and turbines with a dummy mass on the shaft to simulate the compressor. ICA testing was conducted to establish component performance at design operating conditions. ICA and cold air aerodynamic testing of the turbine stage and cooling flow effects, indicates design efficiency goals were exceeded. ICA test results, cold-air testing and combustion system parameters were input to the cycle model. Room temperature strain-control LCF tests were performed and results analyzed on a Weibull distribution. Data analysis indicated LCF life improvement was obtained through HIP and heat treatment.

  7. Design Features of Automation System of South-to-North Water Transfer Auxiliary Project in Hebei Province%河北省南水北调配套工程自动化系统设计特点

    Institute of Scientific and Technical Information of China (English)



    河北省南水北调配套工程自动化系统由 12 个子系统构成,在设计中采用"专业分区与管理分层"的设计理念,并在应用支撑平台中采用集中部署方式和虚拟化技术,在数据资源管理平台中配置异地备份数据中心,在工程监控系统中增设区域应急调度站,在主干通信管网中借助总干渠备用管孔,采用微管微缆技术等先进设计方法,形成"集中调度与区域应急调度"的新型调度模式、"二级监控与三级管理"的新型管控模式,极好地适应自动化系统建设需求.%The automation system of South-to-North water transfer auxiliary project in Hebei Province consists of 12 subsystems, using the design concept of"Professional Partitioning and Hierarchical Management". The application supporting platform adopts technology of centralized deployment and the virtualization. The data resource management platform is configured with a remote backup data center, the monitoring and control system of the project is added the regional emergency dispatching station. With the aid of the spare tube hole of the main canal and technology of microtubules and micro cable, the trunk communication network forms a new scheduling model of centralized scheduling and regional emergency scheduling, and a new type of management mode of secondary monitor and three-level management, they perfectly adapt to the construction requirements of the automation system.

  8. Distribution Estimation with Smoothed Auxiliary Information

    Institute of Scientific and Technical Information of China (English)

    Xu Liu; Ahmad Ishfaq


    Distribution estimation is very important in order to make statistical inference for parameters or its functions based on this distribution. In this work we propose an estimator of the distribution of some variable with non-smooth auxiliary information, for example, a symmetric distribution of this variable. A smoothing technique is employed to handle the non-differentiable function. Hence, a distribution can be estimated based on smoothed auxiliary information. Asymptotic properties of the distribution estimator are derived and analyzed.The distribution estimators based on our method are found to be significantly efficient than the corresponding estimators without these auxiliary information. Some simulation studies are conducted to illustrate the finite sample performance of the proposed estimators.

  9. Builtin vs. auxiliary detection of extrapolation risk.

    Energy Technology Data Exchange (ETDEWEB)

    Munson, Miles Arthur; Kegelmeyer, W. Philip,


    A key assumption in supervised machine learning is that future data will be similar to historical data. This assumption is often false in real world applications, and as a result, prediction models often return predictions that are extrapolations. We compare four approaches to estimating extrapolation risk for machine learning predictions. Two builtin methods use information available from the classification model to decide if the model would be extrapolating for an input data point. The other two build auxiliary models to supplement the classification model and explicitly model extrapolation risk. Experiments with synthetic and real data sets show that the auxiliary models are more reliable risk detectors. To best safeguard against extrapolating predictions, however, we recommend combining builtin and auxiliary diagnostics.

  10. Generating Selected Color using RGB, Auxiliary Lights, and Simplex Search

    Directory of Open Access Journals (Sweden)

    Kim HyungTae


    Full Text Available A mixed light source generates various colors, with the potential to adjust intensities of multiple LEDs, which makes it possible to generate arbitrary colors. Currently, PCs and OSs provide color selection windows that can obtain the RGB or HSL color coordinates of a user’s selection. Mixed light sources are usually composed of LEDs in the primary colors, with LEDs in auxiliary colors such as white and yellow used in a few cases. When using auxiliary color LEDs, the number of LED inputs, the dimming levels, is larger than the number of elements in the color coordinate, which causes an under-determined problem. This study proposed how to determine the dimming levels of LEDs based on the selected color. Commercial LEDs have di_erent optical power values and impure color coordinates, even if they are RGB. Hence, the characteristics of the LEDs were described using a linear model derived from the tri-stimulus values (an XYZ color coordinate model and dimming levels. Color mixing models were derived for the arbitrary number of auxiliary color LEDs. The under-determined problem was solved using a simplex search method without an inverse matrix operation. The proposed method can be applied to a machine vision system and an RGBW light mixer for semiconductor inspection. The dimming levels, obtained using the proposed method were better than derived using other methods.

  11. Heat transfer equipment performance diagnosis of auxiliary systems in electric power stations; Diagnostico de comportamiento de equipo de transferencia de calor de sistemas auxiliares de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Esparza Gutierrez, Rogelio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)


    In this article the methodology followed to diagnose the performance of the equipment where heat is transferred from the feed water, condensate and circulation water systems in fossil power plants (FPP). The data collection is made with the unit in normal operation, using local instrumentation without taking the equipment out of service for its installation. The equipment diagnosis is made through the analysis of the collected data in actual operation and the design data; for this purpose a thermal balance of the interested systems is performed to obtain all the conditions an operation data. Later on the performance indicative parameters (PIP) of actual operation and design are calculated and compared one against the other. Such a comparison reveals the performance deterioration and the possible equipment faults. The data obtained and the supplementary information are stored in a data base whose objective is that Comision Federal de Electricidad has on hand a prompt access to them in order to control the performance, compare them among similar units and power stations, and inclusively verify possible recurrent causes of low availability in the referred systems. [Espanol] En este articulo se presenta la metodologia seguida para diagnosticar el comportamiento de equipos en los que se transfiere calor de los sistemas de agua de alimentacion, condensado y circulacion de las centrales termoelectricas (CTE). La toma de datos se realiza con la unidad en operacion normal, utilizando instrumentacion local sin necesidad de sacar de servicio a los equipos para su instalacion, ya que se ocupan los mismos puntos para instrumentos con que cuentan por diseno. El diagnostico de los equipos se realiza mediante el analisis de los datos recopilados, tanto de operacion real como de diseno; para ello, se efectua un balance termico de los sistemas de interes para obtener todas las condiciones y los datos de operacion. Posteriormente, se calculan los parametros indicativos de

  12. Analysis on Improvement of Lightning Protection of Nuclear Auxiliary Building Ventilation System of LING AO PhaseⅡ%岭澳二期核辅助厂房通风系统防雷改进分析

    Institute of Scientific and Technical Information of China (English)

    李明钢; 王耀刚; 李东; 关济实; 张立蕊


    Affected by climate, it is always raining in Guang Dong province and the Daya bay nuclear power plant always suffers from lightning. Therefore, it is very important to improve the lightning protection facilities. In order to solve the problems that lightning protection of nuclear auxiliary building ventilation system and other related component in Daya bay nuclear power plant reactor protection system, and improve the lightning protection level, a plan about improving the lightning protection facilities is proposed, and further analysis and demonstration are made as well, which are based on the actual situation. The plan of improving the lightning protection facilities is of great significance to the safe and stable operation of Daya bay nuclear power station.%受气候影响,广东大亚湾核电站多发雷雨,而雷击会严重威胁核电站的安全稳定运行。因此,提高防雷设施十分重要。针对大亚湾核电站反应堆保护系统相关的核辅助厂房通风系统的信号回路结构及容易受到雷电干扰部分的防雷保护问题,结合实际情况,对核辅助厂房通风系统的防雷设施进行改进及分析论证,提高防雷等级。该防雷设施改进方案对大亚湾核电站的安全稳定运行有着重要的意义。

  13. Standby power supply automatic switching-on relay design and setting of converter station auxiliary power system%换流站站用电备自投装置设计及整定

    Institute of Scientific and Technical Information of China (English)

    胡晓静; 李志勇; 杨慧霞; 蒋冠前; 杨静


    Perfect station auxiliary power system main diagram and efficient standby power supply automatic switching-on logic should be designed in converter station of HVDC system for the safe and stable operation. According to the electric diagram and operation requirement of Pu'er converter station, five operation conditions are considered and charge/discharge logic and thirteen automatic switching-on/off logic are designed for 10 kV standby power supply automatic switching-on relay, two automatic switching-on/off logics are designed for 400 V standby power supply automatic switching-on relay. Meanwhile, the setting principle and coordination are discussed and the recommended settings are given. The standby power supply automatic switching-on/off logic has been applied in Pu'er converter station, experimental results and operation conditions show that standby power supply automatic switching-on relay will trip the circuit breaker of fault line and switch to standby power supply rapidly while one or two station auxiliary power supply fault without reducing HVDC transmission power, the reliability and stability of HVDC system are greatly improved.%为了保证直流输电工程换流站站用电设备安全稳定运行,必须合理设计站用电系统及备用电源自动投入装置的动作逻辑。以糯扎渡直流输电工程普洱换流站为例,根据主接线形式、运行要求和具体运行工况,对10 kV备自投的五种运行工况分别设计了备自投充放电逻辑和十三种动作投切逻辑,对400 V备自投单母分段运行方式设计了两种动作投切逻辑。同时,对备自投装置的定值整定原则及定值配合相关问题进行了研究,给出了推荐定值。所提出的备自投方案经现场实际运行证明:通过10 kV和400 V两级备自投装置的配合,在各种运行工况下某路或某两路站用电源失电时备自投装置都能快速动作投切至备用电源,无需降低直流输送功率或

  14. Curricular Guidelines for Dental Auxiliary Radiology. (United States)

    Journal of Dental Education, 1981


    AADS curricular guidelines suggest objectives for these areas of dental auxiliary radiology: physical principles of X-radiation in dentistry, related radiobiological concepts, principles of radiologic health, radiographic technique, x-ray films and intensifying screens, factors contributing to film quality, darkroom, and normal variations in…

  15. The Changing Face of Auxiliary Services (United States)

    Villano, Matt


    With tuition on the rise, Auxiliary Services departments at a variety of colleges and universities are proving that they can innovate and still save their parent institutions cash. Primary areas of innovation include: (1) With advancements in technology, institutions are moving campus purchasing programs into the wireless space; (2) As junk mail …

  16. Geostatistical modeling of topography using auxiliary maps

    NARCIS (Netherlands)

    Hengl, T.; Bajat, B.; Blagojević, D.; Reuter, H.I.


    This paper recommends computational procedures for employing auxiliary maps, such as maps of drainage patterns, land cover and remote-sensing-based indices, directly in the geostatistical modeling of topography. The methodology is based on the regression-kriging technique, as implemented in the R pa

  17. 静动液辅助制动系统恒转矩制动策略研究%Research on Constant Torque Braking Strategy of Hydrostatic and Hydraulic Auxiliary Braking System

    Institute of Scientific and Technical Information of China (English)

    吕建刚; 郭劭琰; 李彦路; 滕飞; 宋彬


    A constant torque braking strategy for tracked vehicle hydrostatic and hydraulic auxiliary braking system is studied. Combining the test and theoretical analysis results, the influence law of coupler filling liquid quantity and hydraulic pump discharge variation to vehicle braking force under the hydrodynamic braking and hydrostatic braking work condition is obtained. Absorbing the advantages of hydrodynamic braking and hydrostatic braking,aiming at the work condition of hydrodynamic - hydrostatic braking, the constant torque braking strategy is built. The vehicle constant torque braking is achieved through the automatic regulation of coupler filling liquid quantity and hydraulic pump discharge. The efficiency is verified through the comparison of energy recovery and braking length before and after using constant torque braking strategy.%对履带车辆液力辅助制动系统的恒转矩制动策略进行了研究.结合实验与理论分析的结果,得到了液压制动与液力制动工况下偶合器充液量、液压泵排量的变化对车辆制动力的影响规律,吸取了液压制动与液力制动的优点,针对液力-液压制动工况建立了恒转矩制动策略.通过对偶合器充液量、液压泵排量的自动调节,实现了车辆的恒转矩制动.最后对采用恒转矩制动策略前后的能量回收率与制动距离进行了对比,验证了该策略的效能.

  18. X射线成像系统辅助设备的研发与应用%Development and application on auxiliary equipment of X-ray imaging system

    Institute of Scientific and Technical Information of China (English)

    马飞越; 王博


    Because the installation position of vertical layout switching equipments including GIS (gas insulated switch gear) equipment,tank circuit-breaker and live tank circuit-breaker are higher,the function at height and angle of the X-ray imaging system equipment cannot meet the imaging inspection requirements. The paper developes a height and angle adjustable and mobile X-ray imaging auxiliary equipment,and successfully applies to X-ray imaging inspection of 330 kV live tank circuit-breaker. The application result shows that the device not only improves the efficiency of x-ray imaging inspection,but also ensures the safety of test staff,provides help for the application and popularization of X-ray imaging inspection technology.%由于垂直布置的GIS设备、罐式断路器及瓷柱式断路器等开关类设备安装位置较高,现有X射线成像系统自带辅助装置在高度和角度上不能满足现场X射线成像检测需求。本文开发了一种高度、角度可调的移动式X射线成像系统辅助设备,并成功应用于330 kV瓷柱式断路器X射线成像检测中。应用结果表明:该装置不仅提高了X射线成像检测的效率,而且保证了试验人员安全性,为X射线成像检测技术的推广应用提供了帮助。

  19. Study of the Household Solar Energy Biogas Digester System with Auxiliary Electric Heater%户用辅助加热式太阳能沼气池系统研究

    Institute of Scientific and Technical Information of China (English)

    崔俊奎; 陈文婷


    Due to the low temperature in winter, the biogas fermentation being influenced, the gas production will decrease,or there may produce no biogas, which seriously restricts the application and development of bio-gas digesters. The solar energy biogas digester causes more and more concern and attention, solar collectors only operates during the sunlight in the daytime. The household solar energy biogas digester system with auxiliary electric heater was put forward to ensure efficient operation. The composition and working principle of the system were explained, the two-dimensional steady numerical simulation of heating process in biogas digesters were carried on by using computational fluid dynamics(CFD),the multi-reference frame(MRF)and standard k-ε turbulent model. At the same time,experimental observation was made to validate the rationality of the system. Finally, the feasibility of the system was explained from an economic point of view.%北方地区冬季温度较低出现沼气池产气量少甚至不产气的问题,严重制约着沼气池在农村的应用与推广,逐渐兴起的太阳能沼气池法受到人们的关注和重视。由于太阳能集热器只能在有日照的白天进行储能,为保证沼气池正常连续高效的运行,一种舍辅助电加热器的户用太阳能沼气池系统被提出,文章介绍了系统的组成和工作原理,根据k-ε湍流模型与相应的计算网络及边界条件对沼气池进行了二维定常数值仿真,并进行了实验观测从而验证了该系统的合理性。最后又从经济角度阐述了它的可行性。

  20. 基于模糊规则提升理论的马病辅助诊断专家系统%Equine diseases auxiliary diagnosis expert system based on fuzzy rule promotion theory

    Institute of Scientific and Technical Information of China (English)

    秦宏宇; 李建新; 高翔; 王欢; 肖建华; 王洪斌


    approach for providing the intelligence in the system for diagnosis of the equine diseases. This experiment was conducted to develop a remote auxiliary equine diseases diagnosis expert system. By collecting and analyzing the experiences of diagnosis and treatment from experts on equine disease, the numerical expression of the equine diseases diagnosis knowledge was developed. The knowledge of equine diseases was represented with the method called object-attribute-value triples act (referred as O-A-V act) that combined with the generative formula. As such, it was easy to extract knowledge rules and these rules were used for inference mechanism. Using the confidence factor, multi-valued logic was used to represent the rules of confidence level. In this paper, we suggested a new inference method which was based on use of a fuzzy rule promotion theory. This approach can enhance the intelligence of the disease diagnosis system. If a rule was repeatedly used in corrective diagnostic results, it was then promoted to a higher confidence factor by the rule promotion factor (PCF), and the PCF was the original confidence factor in the next diagnosis session. In short, the dynamic PCF which was generated in the past dialogue was used instead of static CF in the final decision making process. The dynamically promoted rules were derived from those diagnosis sessions, which resulted in successful decisions. This enabled more efficient decision making in the future sessions. With this approach, it was not only decreasing the number of interactive between the system and the users, but also leading to acceptable diagnostic results. Based on the research of knowledge representation and inference mechanism, an auxiliary diagnostic expert system of equine diseases based on Microsoft.Net and SQL Server 2008 was designed and developed. It provided online help to equine farmers and extension workers in China. For the inference engine of system, we used the fuzzy rule promotion methodology that

  1. 14 CFR 29.757 - Hull and auxiliary float strength. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Hull and auxiliary float strength. 29.757 Section 29.757 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... § 29.757 Hull and auxiliary float strength. The hull, and auxiliary floats if used, must withstand...

  2. Software design and implementation of GPS-based gun directing radar auxiliary guide system%基于GPS的炮瞄雷达辅助引导系统软件设计与实现

    Institute of Scientific and Technical Information of China (English)

    黄信安; 刘刚


    空空导弹研制过程需要进行一系列地面飞行试验,而炮瞄雷达为高精度跟踪雷达,波束很窄,不具备大范围自动搜索功能;在地面试验中,雷达跟踪过程出会现丢失目标无法引导的情况,构不成试验条件,导致试验无法进行;该软件利用靶机提供的GPS定位数据,实时解算目标方位、俯仰信息传输给炮瞄雷达系统,实现了对目标的辅助引导、对靶机飞行轨迹的记录回放、以及对目标方位修正功能;实际应用结果表明,该软件具有较高的可靠性和可扩展性,完全满足辅助引导系统的需要。%During the development process of air-to-air missile,a serial of flight test have to be done. The gun directing radar has high precision in tracking,bu its beam is narrow,so it does not have wide range of automatic search function. In ra-dar tracking procedure,the situation of target missing can stop the test. The software can calculate the target bearing and pitch information in real-time,then transmit it to gun directing radar system by using GPS locator data from target drone,thus to realize the functions of assisted guidance for the target,recording and playback of target drone flight trajectory,and the modification the target bearing. The practical application result shows that the software has high reliability and scalability,and can fully meet the needs of auxiliary and guide system.

  3. Computer Auxiliary Analysis for Stochasticity of Chaos

    Institute of Scientific and Technical Information of China (English)

    ZHAOGeng; FANGJin-qing


    In this work, we propose a mathematics-physical statistic analytical method for stochastic process of chaos, based on stochastic test via combination measurement of Monobit and Runs. Computer auxiliary analysis shows that it is of stochasticity for stochastic number produced from the chaotic circuit. Our software is written by VB and C++, the later can be tested by the former, and at the same time it is verified by stochastic number produced by the computer. So the data treatment results are reliable.

  4. Solar combisystems with forecast control to increase the solar fraction and lower the auxiliary energy cost

    DEFF Research Database (Denmark)

    Perers, Bengt; Furbo, Simon; Fan, Jianhua


    Solar Combi systems still need quite a lot of auxiliary energy especially in small systems without seasonal storage possibilities. The control of the auxiliary energy input both in time and power is important to utilize as much as possible of the solar energy available from the collectors and also...... energy sources. It can be either direct electric heating elements or a heat pump upgrading ambient energy in the air, ground, solar collector or waste heat from the house. The paper describes system modeling and simulation results. Advanced laboratory experiments are also starting now with three...... to use low backup energy prices during the day if electricity is used. The storage function and both stratified charging and extraction of heat, are very important, to separate different temperature zones in the storage. This paper describes a step towards forecast control for electricity based auxiliary...

  5. 辅助模型辨识方法(2):输入非线性输出误差系统%Auxiliary model identification methods. Part B:Input nonlinear output-error systems

    Institute of Scientific and Technical Information of China (English)

    丁锋; 陈慧波


    针对具有已知基的输入非线性输出误差系统,提出了基于过参数化模型的辅助模型递推辨识方法和辅助模型递阶辨识方法,提出了基于关键项分离的辅助模型递推辨识方法、基于关键项分离的辅助模型两阶段辨识方法和辅助模型三阶段辨识方法,提出了基于双线性参数模型分解的辅助模型随机梯度算法和基于双线性参数模型分解的辅助模型递推最小二乘算法,并给出了几个典型辨识算法的计算量、计算步骤。这些算法的收敛性分析都是需要研究的辨识课题。%For input nonlinear output⁃error systems with known bases,this paper presents the over⁃parameterization model based auxiliary model ( AM) recursive identification methods,the over⁃parameterization model based AM hi⁃erarchical identification methods,the key term separation based AM recursive identification methods,the key term separation based AM two⁃stage recursive identification methods,the key term separation based AM three⁃stage re⁃cursive identification methods,the bilinear⁃in⁃parameter model decomposition based AM stochastic gradient identifi⁃cation methods and the bilinear⁃in⁃parameter model decomposition based AM recursive least squares identification methods.Finally,the computational efficiency and the computational steps of several typical identification algorithms are discussed.The convergence of the proposed algorithms needs further study.

  6. Terminal Sliding Mode Control with Unidirectional Auxiliary Surfaces for Hypersonic Vehicles Based on Adaptive Disturbance Observer

    Directory of Open Access Journals (Sweden)

    Naibao He


    Full Text Available A novel flight control scheme is proposed using the terminal sliding mode technique, unidirectional auxiliary surfaces and the disturbance observer model. These proposed dynamic attitude control systems can improve control performance of hypersonic vehicles despite uncertainties and external disturbances. The terminal attractor is employed to improve the convergence rate associated with the critical damping characteristics problem noted in short-period motions of hypersonic vehicles. The proposed robust attitude control scheme uses a dynamic terminal sliding mode with unidirectional auxiliary surfaces. The nonlinear disturbance observer is designed to estimate system uncertainties and external disturbances. The output of the disturbance observer aids the robust adaptive control scheme and improves robust attitude control performance. Finally, simulation results are presented to illustrate the effectiveness of the proposed terminal sliding mode with unidirectional auxiliary surfaces.

  7. Homotopy Perturbation Method with an Auxiliary Term

    Directory of Open Access Journals (Sweden)

    Ji-Huan He


    Full Text Available The two most important steps in application of the homotopy perturbation method are to construct a suitable homotopy equation and to choose a suitable initial guess. The homotopy equation should be such constructed that when the homotopy parameter is zero, it can approximately describe the solution property, and the initial solution can be chosen with an unknown parameter, which is determined after one or two iterations. This paper suggests an alternative approach to construction of the homotopy equation with an auxiliary term; Dufing equation is used as an example to illustrate the solution procedure.

  8. Auxiliary Subunits: Shepherding AMPA Receptors to the Plasma Membrane

    Directory of Open Access Journals (Sweden)

    Simon C. Haering


    Full Text Available Ionotropic glutamate receptors (iGluRs are tetrameric ligand-gated cation channels that mediate excitatory signal transmission in the central nervous system (CNS of vertebrates. The members of the iGluR subfamily of α-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid (AMPA receptors (AMPARs mediate most of the fast excitatory signal transmission, and their abundance in the postsynaptic membrane is a major determinant of the strength of excitatory synapses. Therefore, regulation of AMPAR trafficking to the postsynaptic membrane is an important constituent of mechanisms involved in learning and memory formation, such as long-term potentiation (LTP and long-term depression (LTD. Auxiliary subunits play a critical role in the facilitation and regulation of AMPAR trafficking and function. The currently identified auxiliary subunits of AMPARs are transmembrane AMPA receptor regulatory proteins (TARPs, suppressor of lurcher (SOL, cornichon homologues (CNIHs, synapse differentiation-induced gene I (SynDIG I, cysteine-knot AMPAR modulating proteins 44 (CKAMP44, and germ cell-specific gene 1-like (GSG1L protein. In this review we summarize our current knowledge of the modulatory influence exerted by these important but still underappreciated proteins.

  9. The SOL-2/Neto auxiliary protein modulates the function of AMPA-subtype ionotropic glutamate receptors. (United States)

    Wang, Rui; Mellem, Jerry E; Jensen, Michael; Brockie, Penelope J; Walker, Craig S; Hoerndli, Frédéric J; Hauth, Linda; Madsen, David M; Maricq, Andres V


    The neurotransmitter glutamate mediates excitatory synaptic transmission by gating ionotropic glutamate receptors (iGluRs). AMPA receptors (AMPARs), a subtype of iGluR, are strongly implicated in synaptic plasticity, learning, and memory. We previously discovered two classes of AMPAR auxiliary proteins in C. elegans that modify receptor kinetics and thus change synaptic transmission. Here, we have identified another auxiliary protein, SOL-2, a CUB-domain protein that associates with both the related auxiliary subunit SOL-1 and with the GLR-1 AMPAR. In sol-2 mutants, behaviors dependent on glutamatergic transmission are disrupted, GLR-1-mediated currents are diminished, and GLR-1 desensitization and pharmacology are modified. Remarkably, a secreted variant of SOL-1 delivered in trans can rescue sol-1 mutants, and this rescue depends on in cis expression of SOL-2. Finally, we demonstrate that SOL-1 and SOL-2 have an ongoing role in the adult nervous system to control AMPAR-mediated currents.

  10. The auxiliary elliptic-like equation and the exp-function method

    Indian Academy of Sciences (India)

    Hong Li; Jin-Liang Zhang


    The auxiliary equation method is very useful for finding the exact solutions of the nonlinear evolution equations. In this paper, a new idea of finding the exact solutions of the nonlinear evolution equations is introduced. The idea is that the exact solutions of the auxiliary elliptic-like equation are derived using exp-function method, and then the exact solutions of the nonlinear evolution equations are derived with the aid of auxiliary elliptic-like equation. As examples, the RKL models, the high-order nonlinear Schrödinger equation, the Hamilton amplitude equation, the generalized Hirota–Satsuma coupled KdV system and the generalized ZK–BBM equation are investigated and the exact solutions are presented using this method.

  11. Arm-length stabilisation for interferometric gravitational-wave detectors using frequency-doubled auxiliary lasers

    CERN Document Server

    Mullavey, Adam J; Miller, John; Evans, Matthew; Fritschel, Peter; Sigg, Daniel; Waldman, Sam J; Shaddock, Daniel A; McClelland, David E


    Residual motion of the arm cavity mirrors is expected to prove one of the principal impediments to systematic lock acquisition in advanced gravitational-wave interferometers. We present a technique which overcomes this problem by employing auxiliary lasers at twice the fundamental measurement frequency to pre-stabilise the arm cavities' lengths. Applying this approach, we reduce the apparent length noise of a 1.3 m long, independently suspended Fabry-Perot cavity to 30 pm rms and successfully transfer longitudinal control of the system from the auxiliary laser to the measurement laser.

  12. The extended auxiliary equation method for the KdV equation with variable coefficients

    Institute of Scientific and Technical Information of China (English)

    Shi Lan-Fang; Chen Cai-Sheng; Zhou Xian-Chun


    This paper applies an extended auxiliary equation method to obtain exact solutions of the KdV equation with variable coefficients.As a result,solitary wave solutions,trigonometric function solutions,rational function solutions,Jacobi elliptic doubly periodic wave solutions,and nonsymmetrical kink solution are obtained.It is shown that the extended auxiliary equation method,with the help of a computer symbolic computation system,is reliable and effective in finding exact solutions of variable coefficient nonlinear evolution equations in mathematical physics.

  13. Arm-length stabilisation for interferometric gravitational-wave detectors using frequency-doubled auxiliary lasers. (United States)

    Mullavey, Adam J; Slagmolen, Bram J J; Miller, John; Evans, Matthew; Fritschel, Peter; Sigg, Daniel; Waldman, Sam J; Shaddock, Daniel A; McClelland, David E


    Residual motion of the arm cavity mirrors is expected to prove one of the principal impediments to systematic lock acquisition in advanced gravitational-wave interferometers. We present a technique which overcomes this problem by employing auxiliary lasers at twice the fundamental measurement frequency to pre-stabilise the arm cavities' lengths. Applying this approach, we reduce the apparent length noise of a 1.3 m long, independently suspended Fabry-Perot cavity to 30 pm rms and successfully transfer longitudinal control of the system from the auxiliary laser to the measurement laser.

  14. Learning With Auxiliary Less-Noisy Labels. (United States)

    Duan, Yunyan; Wu, Ou


    Obtaining a sufficient number of accurate labels to form a training set for learning a classifier can be difficult due to the limited access to reliable label resources. Instead, in real-world applications, less-accurate labels, such as labels from nonexpert labelers, are often used. However, learning with less-accurate labels can lead to serious performance deterioration because of the high noise rate. Although several learning methods (e.g., noise-tolerant classifiers) have been advanced to increase classification performance in the presence of label noise, only a few of them take the noise rate into account and utilize both noisy but easily accessible labels and less-noisy labels, a small amount of which can be obtained with an acceptable added time cost and expense. In this brief, we propose a learning method, in which not only noisy labels but also auxiliary less-noisy labels, which are available in a small portion of the training data, are taken into account. Based on a flipping probability noise model and a logistic regression classifier, this method estimates the noise rate parameters, infers ground-truth labels, and learns the classifier simultaneously in a maximum likelihood manner. The proposed method yields three learning algorithms, which correspond to three prior knowledge states regarding the less-noisy labels. The experiments show that the proposed method is tolerant to label noise, and outperforms classifiers that do not explicitly consider the auxiliary less-noisy labels.

  15. Ten-dimensional Maxwell-Einstein supergravity, its currents, and the issue of its auxiliary fields

    NARCIS (Netherlands)

    Bergshoeff, E.; Roo, M. de; Wit, B. de


    The d = 10, N = 1 Yang-Mills system is coupled to d = 10, N = 1 supergravity in a locally scale-invariant way. An analysis of the currents agrees with the Noether coupling results and reveals the existence of two ordinary axial and more low-dimension auxiliary fields. The coupling of the photon Aµ


    Directory of Open Access Journals (Sweden)

    A. L. Starzhinskij


    Full Text Available The paper completes ascertainment of electrical-supply scheme reliability for the auxiliaries of a nuclear power plant. Thereat the author considers the system behavior during the block normal operation, carrying out current maintenance, and capital repairs in combination with initiating events. The initiating events for reactors include complete blackout, i.e. the loss of outside power supply (normal and reserve; emergency switching one of the working turbogenerators; momentary dumping the normal rating to the level of auxiliaries with seating the cutout valve of one turbo-generator. The combination of any initiating event with the repairing mode in case of one of the system elements failure should not lead to blackout occurrence of more than one system of the reliable power supply. This requirement rests content with the help of the reliable power supply system self-dependence (electrical and functional and the emergency power-supply operational autonomy (diesel generator and accumulator batteries.The reliability indicators of the power supply system for the nuclear power plant auxiliaries are the conditional probabilities of conjoined blackout of one, two, and three sections of the reliable power supply conditional upon an initiating event emerging and the blackout of one, two, and three reliable power-supply sections under the normal operational mode. Furthermore, they also are the blackout periodicity of one and conjointly two, three, and four sections of normal operation under the block normal operational mode. It is established that the blackout of one bus section of normal operation and one section of reliable power-supply system of the auxiliaries that does not lead to complete blackout of the plant auxiliaries may occur once in three years. The probability of simultaneous power failure of two or three normal-operation sections and of two reliable power-supply sections during the power plant service life is unlikely.

  17. PMC Control Design Principle and Program Implementation of Auxiliary Function M Commands in CNC Machine Tool Based on FANUC Oi Mate-MD System%基于FANUC Oi Mate-MD 系统的数控辅助功能M指令的PMC控制设计原理和程序实现

    Institute of Scientific and Technical Information of China (English)

    呼刚义; 杨新刚; 杨鹏


    数控机床辅助功能指令由CNC和PMC共同处理,但其具体运算处理过程国内还未见文献系统报道。用一具体实例对冷却液M指令的运行机制、PMC程序设计及加载、辅助功能M指令机床验证进行了详细阐述,有助于更好地使用、维护机床和利用系统提供的PMC梯形图来快速诊断故障,特别是对理解PMC程序、扩展开发机床控制功能提供了参考。%CNC machine tool auxiliary function commands are handled by CNC and PMC,but their concrete operation processes have not been reported in domestic literature system. Based on the specific examples,the operation mechanism of coolant M instruc-tion,the design and load of PMC program,the auxiliary function commands machine validation,were elaborated in detail. This will contribute to a better use and maintenance,and using PMC ladder diagram interface of NC system to diagnose fault quickly,especially it provides reference for understanding the PMC program,extending the development of machine control function.

  18. Saddle Points in the Auxiliary Field Method

    CERN Document Server

    Aono, Hiroki


    Investigations are made on the saddle point calculations (SPC) under the auxiliary field method in path integrations. Two different ways of SPC are considered, Method(I) and Method(II), to be checked in an integral representation of the Gamma function, \\Gamma (N), as a bosonic example and in a four-fermi type of Grassmann integral where one "fermion mass" \\omega_0 differs from the other N-degenerate species. The recipe of Method(I) seems rather complicated than that of (II) superficially, but the case turns out to be opposite in the actual situation. A general formalism allows us to calculate for \\Gamma (N) up to O(1/N^{14}). It is found that both happen to coincide in the bosonic case but in the fermionic case Method(II) shows a huge deviation in the weak coupling region where \\omega_0 \\ll 1.

  19. Auxiliary fields in the geometrical relativistic particle dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Amador, A; Bagatella, N; Rojas, E [Departamento de Fisica, Facultad de Fisica e Inteligencia Artificial, Universidad Veracruzana, 91000 Xalapa, Veracruz (Mexico); Cordero, R [Departamento de Fisica, Escuela Superior de Fisica y Matematicas del I.P.N, Edificio 9, 07738 Mexico D.F (Mexico)], E-mail:, E-mail:, E-mail:, E-mail:


    We describe how to construct the dynamics of relativistic particles, following either timelike or null curves, by means of an auxiliary variables method instead of the standard theory of deformations for curves. There are interesting physical particle models governed by actions that involve higher order derivatives of the embedding functions of the worldline. We point out that the mechanical content of such models can be extracted wisely from a lower order action, which can be performed by implementing in the action a finite number of constraints that involve the geometrical relationship structures inherent to a curve and by using a covariant formalism. We emphasize our approach for null curves. For such systems, the natural time parameter is a pseudo-arclength whose properties resemble those of the standard proper time. We illustrate the formalism by applying it to some models for relativistic particles.

  20. Electrical detection of magnetization reversal without auxiliary magnets (United States)

    Olejník, K.; Novák, V.; Wunderlich, J.; Jungwirth, T.


    First-generation magnetic random access memories based on anisotropic magnetoresistance required magnetic fields for both writing and reading. Modern all-electrical read/write memories use instead nonrelativistic spin transport connecting the storing magnetic layer with a reference ferromagnet. Recent studies have focused on electrical manipulation of magnetic moments by relativistic spin torques requiring no reference ferromagnet. Here we report the observation of a counterpart magnetoresistance effect in such a relativistic system which allows us to electrically detect the sign of the magnetization without an auxiliary magnetic field or ferromagnet. We observe the effect in a geometry in which the magnetization of a uniaxial (Ga,Mn)As epilayer is set either parallel or antiparallel to a current-induced nonequilibrium spin polarization of carriers. In our structure, this linear-in-current magnetoresistance reaches 0.2% at current density of 106Acm -2 .

  1. Using principal components as auxiliary variables in missing data estimation

    NARCIS (Netherlands)

    Howard, W.J.; Rhemtulla, M.; Little, T.D.


    To deal with missing data that arise due to participant nonresponse or attrition, methodologists have recommended an "inclusive" strategy where a large set of auxiliary variables are used to inform the missing data process. In practice, the set of possible auxiliary variables is often too large. We

  2. 14 CFR 29.1142 - Auxiliary power unit controls. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 29.1142... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Powerplant Controls and Accessories § 29.1142 Auxiliary power unit controls. Means must be provided on the flight deck for...

  3. 14 CFR 23.1142 - Auxiliary power unit controls. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 23.1142... Powerplant Controls and Accessories § 23.1142 Auxiliary power unit controls. Means must be provided on the... power unit....

  4. 14 CFR 25.1142 - Auxiliary power unit controls. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Auxiliary power unit controls. 25.1142... AIRCRAFT AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Powerplant Controls and Accessories § 25.1142 Auxiliary power unit controls. Means must be provided on the flight deck for...

  5. 47 CFR 80.290 - Auxiliary receiving antenna. (United States)


    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Auxiliary receiving antenna. 80.290 Section 80... antenna. An auxiliary receiving antenna must be provided when necessary to avoid unauthorized interruption or reduced efficiency of the required watch because the normal receiving antenna is not...

  6. Dedicated auxiliary power units for Hybrid Electric Vehicles

    NARCIS (Netherlands)

    Mourad, S.; Weijer, C.J.T. van de


    The use of a dedicated auxiliary power unit is essential to utilize the potential that hybrid vehicles offer for efficient and ultra-clean transportation. An example of a hybrid project at the TNO Road-Vehicles Research Institute shows the development and the results of a dedicated auxiliary power u

  7. Effects of auxiliary source connections in multichip power module

    DEFF Research Database (Denmark)

    Li, Helong; Munk-Nielsen, Stig; Beczkowski, Szymon


    totally decouple the power loop and the gate loop like how the Kelvin source connection does, because they are still in the loop of power source current. Three effects of the auxiliary source connection are investigated and analyzed: common source stray inductance reduction, transient drain-source current......Auxiliary source bond wires and connections are widely used to in the power module with paralleled MOSFETs or IGBTs. This paper investigates the working mechanism and the effects of the auxiliary source connections in multichip power modules. It reveals that the auxiliary source connections cannot...... imbalance mitigation and influence on the steady state bond wire current distribution. Simulation and experimental results validate the working mechanism analysis and the effects of the auxiliary source connections....

  8. Energy Recovery for the Main and Auxiliary Sources of Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Binggang Cao


    Full Text Available Based on the traditional regenerative braking electrical circuit, a novel energy recovery system for the main and auxiliary sources of electric vehicles (EVs has been developed to improve their energy efficiency. The electrical circuit topology is presented in detail. During regenerative braking, the recovered mechanical energy is stored in both the main source and the auxiliary source at the same time. The mathematical model of the proposed system is derived step by step. Combining the merits and defects of H2 optimal control and H∞ robust control, a H2/H∞ controller is designed to guarantee both the system performance and robust stability. The perfect match between the simulated and experimental results validates the notion that the proposed novel energy recovery system is both feasible and effective, as more energy is recovered than that with the traditional energy recovery systems, in which recovered energy is stored only in the main source.

  9. Indirect combustion noise of auxiliary power units (United States)

    Tam, Christopher K. W.; Parrish, Sarah A.; Xu, Jun; Schuster, Bill


    Recent advances in noise suppression technology have significantly reduced jet and fan noise from commercial jet engines. This leads many investigators in the aeroacoustics community to suggest that core noise could well be the next aircraft noise barrier. Core noise consists of turbine noise and combustion noise. There is direct combustion noise generated by the combustion processes, and there is indirect combustion noise generated by the passage of combustion hot spots, or entropy waves, through constrictions in an engine. The present work focuses on indirect combustion noise. Indirect combustion noise has now been found in laboratory experiments. The primary objective of this work is to investigate whether indirect combustion noise is also generated in jet and other engines. In a jet engine, there are numerous noise sources. This makes the identification of indirect combustion noise a formidable task. Here, our effort concentrates exclusively on auxiliary power units (APUs). This choice is motivated by the fact that APUs are relatively simple engines with only a few noise sources. It is, therefore, expected that the chance of success is higher. Accordingly, a theoretical model study of the generation of indirect combustion noise in an Auxiliary Power Unit (APU) is carried out. The cross-sectional areas of an APU from the combustor to the turbine exit are scaled off to form an equivalent nozzle. A principal function of a turbine in an APU is to extract mechanical energy from the flow stream through the exertion of a resistive force. Therefore, the turbine is modeled by adding a negative body force to the momentum equation. This model is used to predict the ranges of frequencies over which there is a high probability for indirect combustion noise generation. Experimental spectra of internal pressure fluctuations and far-field noise of an RE220 APU are examined to identify anomalous peaks. These peaks are possible indirection combustion noise. In the case of the

  10. Aging assessment of auxiliary feedwater pumps

    Energy Technology Data Exchange (ETDEWEB)

    Greenstreet, W.L.


    ORNL is conducting aging assessments of auxiliary feedwater pumps to provide recommendations for monitoring and assessing the severity of time-dependent degradation as well as to recommend maintenance and replacement practices. Cornerstones of these activities are the identification of failure modes and causes and ranking of causes. Failure modes and causes of interest are those due to aging and service wear. Design details, functional requirements, and operating experience data were used to identify failure modes and causes and to rank the latter. Based on this input, potentially useful inspection, surveillance, and condition monitoring methods that are currently available for use or in the developmental stage were examined and recommendations made. The methods selected are listed and discussed in terms of use and information to be obtained. Relationships between inspection, surveillance, and monitoring and maintenance practices entered prominently into maintenance recommendations. These recommendations, therefore, embrace predictive as well as corrective and preventative maintenance practices. The recommendations are described, inspection details are discussed, and periodic inspection and maintenance interval guidelines are given. Surveillance testing at low-flow conditions is also discussed. It is shown that this type of testing can lead to accelerated aging.

  11. Hydrogen utilization international clean energy system technology (WE-NET). Subtask 8. Development of hydrogen combustion turbines (development of the main auxiliary machinery); Suiso riyo kokusai clean energy system gijutsu (WE-NET). Subtask 8. Suiso nensho turbine no kaihatsu (shuyo hokirui no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)



    The paper described the fiscal 1996 developmental result of the main auxiliary machinery of hydrogen combustion turbines, as one of the hydrogen utilization technologies, which are excellent in environmentality and are expected of remarkably high efficiency. When a scale of the turbine plant is 500MW, there are two systems of 125,000 Nm{sup 3}/h and 62,500 Nm{sup 3}/h as a capacity of the hydrogen/oxygen supply system. Cold energy is taken out by the plate fin method. In view of safety, the main heat exchanger was separated into those for hydrogen and for oxygen (liquid oxygen cold energy recovery). In the para-ortho conversion of hydrogen, cold energy of 90% of the ideal state was gained in the one-stage catalyst conversion. As to high temperature heat exchangers, full-scale studies were conducted of size reduction, structural soundness, and the heat exchanger for pilot plant use. The more Cr the material contains, the less the corrosion due to high temperature steam is. For stainless steel, shot peening and fining of crystal grain were effective. Size reduction of the new Rankine cycle use steam generator was made possible by making its fin number and tube pitch proper. However, when making tube pitch smaller, flexural rigidity is lowered. Accordingly, it is necessary to study a trade-off between the size reduction and the structural soundness. 31 refs., 125 figs., 11 tabs.

  12. Auxiliary Subunit GSG1L Acts to Suppress Calcium-Permeable AMPA Receptor Function (United States)

    McGee, Thomas P.; Bats, Cécile


    synaptic plasticity, and alterations in their expression or regulation are also seen in a number of serious neurological conditions, including stroke, motor neuron disease, and cocaine addiction. Several groups of auxiliary transmembrane proteins have been described that enhance the function and cell-surface expression of AMPARs. We now report that the recently identified auxiliary protein GSG1L decreases weighted mean channel conductance and calcium permeability of CP-AMPARs while increasing polyamine-dependent rectification by diminishing outward current. Our experiments reveal that GSG1L is an auxiliary subunit that can markedly suppress CP-AMPAR function, in both recombinant systems and central neurons. PMID:26658868

  13. Simulative technology for auxiliary fuel tank separation in a wind tunnel

    Institute of Scientific and Technical Information of China (English)

    Ma Xin; Liu Wei; Chen Ling; Li Xiao; Jia Zhenyuan; Shang Zhiliang


    In this paper, we propose a simulative experimental system in wind tunnel conditions for the separation of auxiliary fuel tanks from an aircraft. The experimental system consists of a simulative release mechanism, a scaled model and a pose measuring system. A new release mechanism was designed to ensure stability of the separation. Scaled models of the auxiliary fuel tank were designed and their moment of inertia was adjusted by installing counterweights inside the model. Pose param-eters of the scaled model were measured and calculated by a binocular vision system. Additionally, in order to achieve high brightness and high signal-to-noise ratio of the images in the dark enclosed wind tunnel, a new high-speed image acquisition method based on miniature self-emitting units was pre-sented. Accuracy of the pose measurement system and repeatability of the separation mechanism were verified in the laboratory. Results show that the position precision of the pose measurement system can reach 0.1 mm, the precision of the pitch and yaw angles is less than 0.1? and that of the roll angle can be up to 0.3?. Besides, repeatability errors of models’ velocity and angular velocity controlled by the release mechanism remain small, satisfying the measurement requirements. Finally, experiments for the separation of auxiliary fuel tanks were conducted in the laboratory.

  14. Nonequilibrium dynamical mean-field theory: an auxiliary quantum master equation approach. (United States)

    Arrigoni, Enrico; Knap, Michael; von der Linden, Wolfgang


    We introduce a versatile method to compute electronic steady-state properties of strongly correlated extended quantum systems out of equilibrium. The approach is based on dynamical mean-field theory (DMFT), in which the original system is mapped onto an auxiliary nonequilibrium impurity problem imbedded in a Markovian environment. The steady-state Green's function of the auxiliary system is solved by full diagonalization of the corresponding Lindblad equation. The approach can be regarded as the nontrivial extension of the exact-diagonalization-based DMFT to the nonequilibrium case. As a first application, we consider an interacting Hubbard layer attached to two metallic leads and present results for the steady-state current and the nonequilibrium density of states.

  15. Effect of auxiliary ventilations on diesel particulate matter dispersion inside a dead-end entry

    Institute of Scientific and Technical Information of China (English)

    Zheng Yi; Thiruvengadam Magesh; Lan Hai; Tien C. Jerry


    Diesel particulate matter (DPM) is considered carcinogenic after prolonged exposure. This paper used computational fluid dynamics (CFD) method to study the effect of four auxiliary ventilation systems on DPM distribution in a dead-end entry with loading operation. The auxiliary ventilation systems con-sidered include:blower fan and tubing;exhaust fan and tubing, jet fan, and push–pull system. A species transport model with buoyancy effect was used to examine the DPM dispersion pattern with unsteady state analysis. During the 200 s of the loading operation, high DPM levels were identified in the face and dead-end entry regions. This study can be used for mining engineer as guidance to design and setup of local ventilation. It can also be used for selection of DPM control strategies and DPM annual training for underground miners.

  16. Parallel Auxiliary Space AMG Solver for $H(div)$ Problems

    Energy Technology Data Exchange (ETDEWEB)

    Kolev, Tzanio V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vassilevski, Panayot S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)


    We present a family of scalable preconditioners for matrices arising in the discretization of $H(div)$ problems using the lowest order Raviart--Thomas finite elements. Our approach belongs to the class of “auxiliary space''--based methods and requires only the finite element stiffness matrix plus some minimal additional discretization information about the topology and orientation of mesh entities. Also, we provide a detailed algebraic description of the theory, parallel implementation, and different variants of this parallel auxiliary space divergence solver (ADS) and discuss its relations to the Hiptmair--Xu (HX) auxiliary space decomposition of $H(div)$ [SIAM J. Numer. Anal., 45 (2007), pp. 2483--2509] and to the auxiliary space Maxwell solver AMS [J. Comput. Math., 27 (2009), pp. 604--623]. Finally, an extensive set of numerical experiments demonstrates the robustness and scalability of our implementation on large-scale $H(div)$ problems with large jumps in the material coefficients.

  17. Effects of Auxiliary-Source Connection in Multichip Power Module

    DEFF Research Database (Denmark)

    Li, Helong; Munk-Nielsen, Stig; Wang, Xiongfei


    the power loop and the gate loop like how the Kelvin-source connection does, owing to their involvement in the loop of the power source current. Three effects of the auxiliary-source connections are then analyzed, which are 1) the common source stray inductance reduction, 2) the transient drain......Auxiliary-source bond wires and connections are widely used in power modules with paralleled MOSFETs or IGBTs. This paper investigates the operation mechanism of the auxiliary-source connections in multichip power modules. It reveals that the auxiliary-source connections cannot fully decouple......-source current imbalance mitigation, and 3) the influence on the steady-state current distribution. Lastly, simulations and experimental results validate the theoretical analysis....

  18. Gauge symmetry breaking in gravity and auxiliary effective action (United States)

    Akhavan, Amin


    In the context of the covariant symmetry breaking in gravity, we study the quantum aspect of Chamseddine-Mukhanov model by making use of path integral method. Utilizing one of the gauge fixing constraints, we remove the specific ghost degree of freedom. In continuation, we define an auxiliary effective action. Introducing an auxiliary field, we will have a new dynamic field in addition to the fundamental field.

  19. A Parallel Auxiliary Grid AMG Method for GPU


    Wang, Lu; Hu, Xiaozhe; Cohen, Jonathan; Xu, Jinchao


    In this paper, we develop a new parallel auxiliary grid algebraic multigrid (AMG) method to leverage the power of graphic processing units (GPUs). In the construction of the hierarchical coarse grid, we use a simple and fixed coarsening procedure based on a region quadtree generated from an auxiliary grid. This allows us to explicitly control the sparsity patterns and operator complexities of the AMG solver. This feature provides (nearly) optimal load balancing and predictable communication p...

  20. First-order framework for flat brane with auxiliary fields

    CERN Document Server

    Bazeia, D; Menezes, R


    This work deals with braneworld models in the presence of auxiliary fields. We investigate the case where Einstein's equation is modified with the inclusion of extra, non-dynamical terms. We show that the model supports first-order differential equations that solve the equations of motion, but the standard braneworld scenario changes under the presence of the parameter that controls the non-dynamical or auxiliary fields that modifies Einstein's equation.


    Directory of Open Access Journals (Sweden)

    O. YU. Baliichuk


    Full Text Available Purpose. The article aims to study the problem of increase the reliability of auxiliary machines for AC electric trains during operation in real conditions. Methodology. The peculiarity of system construction of auxiliary machines for AC electric rolling stock is the use of asynchronous motors for general industrial purpose. An engineering method of influence determination on the feeding voltage asymmetry and its deviation from the nominal value on heating of auxiliary machines insulation was proposed. Findings. It is found out that in case when the auxiliary machines of AC electric trains work under asymmetry factor of the voltage 10% or more and feeding voltage deviation from the nominal order 0.6 relative unit then it is possible the overheat of their isolation, even if it has class H. Originality. For the first time the issue of the total insulation heating under such boundary parameters combinations of energy quality, when each of them contributes to the heating insulation increase as compared to the nominal regime of the "rotating phase splitter−auxiliary machinery" system was illuminated. Practical value. Conducted research allow us to establish the boundary parameter values of feeding energy quality (asymmetry factor, feeding voltage deviations from the nominal value, at which additional isolation overheating of this class under the effect of specified factors will not exceed the agreed value.

  2. 14 CFR 25.363 - Side load on engine and auxiliary power unit mounts. (United States)


    ... § 25.363 Side load on engine and auxiliary power unit mounts. (a) Each engine and auxiliary power unit... the side load on the engine and auxiliary power unit mount, at least equal to the maximum load factor... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Side load on engine and auxiliary...

  3. Dynamic behavior of a magnetic bearing supported jet engine rotor with auxiliary bearings (United States)

    Flowers, George T.; Xie, Huajun; Sinha, S. C.


    This paper presents a study of the dynamic behavior of a rotor system supported by auxiliary bearings. The steady-state behavior of a simulation model based upon a production jet engine is explored over a wide range of operating conditions for varying rotor imbalance, support stiffness, and damping. Interesting dynamical phenomena, such as chaos, subharmonic responses, and double-valued responses, are presented and discussed.

  4. VLTI First Fringes with Two Auxiliary Telescopes at Paranal (United States)


    [Preview - JPEG: 537 x 400 pix - 31k] [Normal - JPEG: 1074 x 800 pix - 555k] [HiRes - JPEG: 3000 x 2235 pix - 6.0M] ESO PR Photo 07d/05 ESO PR Photo 07d/05 [Preview - JPEG: 400 x 550 pix - 60k] [Normal - JPEG: 800 x 1099 pix - 946k] [HiRes - JPEG: 2414 x 3316 pix - 11.0M] Captions: ESO PR Photo 07b/05 shows VLTI Auxiliary Telescopes 1 and 2 (AT1 and AT2) in the early evening light, with the spherical domes opened and ready for observations. In ESO PR Photo 07c/05, the same scene is repeated later in the evening, with three of the large telescope enclosures in the background. This photo and ESO PR Photo 07c/05 which is a time-exposure with AT1 and AT2 under the beautiful night sky with the southern Milky Way band were obtained by ESO staff member Frédéric Gomté. However, most of the time the large telescopes are used for other research purposes. They are therefore only available for interferometric observations during a limited number of nights every year. Thus, in order to exploit the VLTI each night and to achieve the full potential of this unique setup, some other (smaller), dedicated telescopes were included into the overall VLT concept. These telescopes, known as the VLTI Auxiliary Telescopes (ATs), are mounted on tracks and can be placed at precisely defined "parking" observing positions on the observatory platform. From these positions, their light beams are fed into the same common focal point via a complex system of reflecting mirrors mounted in an underground system of tunnels. The Auxiliary Telescopes are real technological jewels. They are placed in ultra-compact enclosures, complete with all necessary electronics, an air conditioning system and cooling liquid for thermal control, compressed air for enclosure seals, a hydraulic plant for opening the dome shells, etc. Each AT is also fitted with a transporter that lifts the telescope and relocates it from one station to another. It moves around with its own housing on the top of Paranal, almost like a snail

  5. Design and Development of Civil Aircraft Flight Performance Auxiliary Calculation System%民用飞机的飞机性能辅助计算系统设计与开发

    Institute of Scientific and Technical Information of China (English)

    褚双磊; 董奇; 刘子昂; 温瑞英


    The performance engineer's daily work in the airline is that making the low-speed performance analysis and route operation evaluation by the software performance corresponding to aircraft model,it has a large amount of daily performance calculation. The research is oriented by pre-flight performance assis-tant calculation of performance engineer, the aircraft performance auxiliary calculation software was de-signed and developed. First it established basic performance database of civil aircraft,including aerody-namic data and engine thrust data,the programming language was used in order to complete the primary basic performance calculation, senior professional performance calculation performance curves output of the three main module design,the daily work of the performance engineers achieved quick and simple cal-culation,it laid the data foundation for the follow-up aircraft professional performance calculation,at the same time,it can offer help for the daily performance training of flight dispatcher.%航空公司性能工程师的日常工作就是使用机型对应的飞机性能软件进行低速性能分析和航线评估,日常计算量很大.面向性能工程师的前期飞行性能辅助计算工作,设计并开发了一款飞机性能辅助计算软件,建立机型基础性能数据库,包含气动数据和发动机推力数据,采用编程语言依次完成初级基础性能计算、高级专业性能计算、性能曲线绘制3个主要模块设计、实现性能工程师日常工作的快捷和简便性计算,为后续专业飞机性能计算打下数据基础,同时也可以为飞行签派员的日常性能训练工作提供帮助.

  6. Study of the reliability of the Auxiliary Feedwater System of a LWR nuclear power plant through the Fault Tree and Bayesian Network; Estudo de confiabilidade do Sistema Auxiliar de Agua de Alimentacao de uma central nuclear a agua leve por arvore de falhas e rede Bayesiana

    Energy Technology Data Exchange (ETDEWEB)

    Lava, Deise Diana


    This paper aims to present a study of the reliability of the Auxiliary Feedwater System (AFWS) through the methods of Fault Tree and Bayesian Network. Therefore, the paper consists of a literature review of the history of nuclear energy and the methodologies used. The AFWS is responsible for providing water system to cool the secondary circuit of nuclear reactors of the PWR type when normal feeding water system failure. How this system operates only when the primary system fails, it is expected that the AFWS failure probability is very low. The AFWS failure probability is divided into two cases: the first is the probability of failure in the first eight hours of operation and the second is the probability of failure after eight hours of operation, considering that the system has not failed within the first eight hours. The calculation of the probability of failure of the second case was made through the use of Fault Tree and Bayesian Network, that it was constructed from the Fault Tree. The results of the failure probability obtained were very close, on the order of 10{sup -3}. (author)

  7. IEC 61850. Integrated supervision of auxiliary power equipment; IEC 61850. Prozess und Eigenbedarf wachsen zusammen

    Energy Technology Data Exchange (ETDEWEB)

    Ostertag, Robert; Jung, Matthias [Siemens AG, Erlangen (Germany)


    It is state of technology today: Having process control and auxiliary power control integrated in one DCS. The integration is based on the international standard IEC 61850 which allows standardization of electrical structures from the process interface up to the DCS level. Modern control systems are designed to realize a system structure according to IEC 61850. A wide range of systems is available from systems with interfaces to realize a standardized data exchange up to systems with a complete integration of the standard IEC 61850. (orig.)

  8. Green Propulsion Auxiliary Power Unit Demonstration at MSFC (United States)

    Robinson, Joel W.


    In 2012, the National Aeronautics & Space Administration (NASA) Space Technology Mission Directorate (STMD) began the process of building an integrated technology roadmap, including both technology pull and technology push strategies. Technology Area 1 (TA-01)1 for Launch Propulsion Systems is one of fourteen TAs that provide recommendations for the overall technology investment strategy and prioritization of NASA's space technology activities. Identified within TA-01 was the need for a green propulsion auxiliary power unit (APU) for hydraulic power by 2015. Engineers led by the author at the Marshall Space Flight Center (MSFC) have been evaluating green propellant alternatives and have begun the development of an APU test bed to demonstrate the feasibility of use. NASA has residual APU assets remaining from the retired Space Shuttle Program. Likewise, the F-16 Falcon fighter jet also uses an Emergency Power Unit (EPU) that has similar characteristics to the NASA hardware. Both EPU and APU components have been acquired for testing at MSFC. This paper will summarize the status of the testing efforts of green propellant from the Air Force Research Laboratory (AFRL) propellant AFM315E based on hydroxyl ammonium nitrate (HAN) with these test assets.

  9. The use of the vinegar as a chemical auxiliary in Endodontics: a literature review

    Directory of Open Access Journals (Sweden)

    Luis Eduardo Duarte IRALA


    Full Text Available Introduction: During the root canal instrumentation with the use of files, there is the formation of a layer called “smear layer”, which may hide among other elements microorganisms capable of perpetuating an endodontic infection, what can lead to endodontic treatment failure. Objective: To present a literature review of apple vinegar and its chemical properties as an auxiliary alternative substance in the permeability in dentin. Literature review: In the attempt to remove the smear layer, auxiliary substances that allow a better action of instruments are used, which also permit the permeability of the system of canals and the removal of organic remains and possible contaminants. Conclusion: The results had indicated that the use of the apple vinegar can be a viable alternative to assist chemistry in Endodontics.

  10. Stochastic gradient algorithm for a dual-rate Box-Jenkins model based on auxiliary model and FIR model

    Institute of Scientific and Technical Information of China (English)

    Jing CHEN; Rui-feng DING


    Based on the work in Ding and Ding (2008), we develop a modifi ed stochastic gradient (SG) parameter estimation algorithm for a dual-rate Box-Jenkins model by using an auxiliary model. We simplify the complex dual-rate Box-Jenkins model to two fi nite impulse response (FIR) models, present an auxiliary model to estimate the missing outputs and the unknown noise variables, and compute all the unknown parameters of the system with colored noises. Simulation results indicate that the proposed method is effective.

  11. Accuracy of marker-assisted selection with auxiliary traits

    Indian Academy of Sciences (India)

    P Narain


    Genetic information on molecular markers is increasingly being used in plant and animal improvement programmes particularly as indirect means to improve a metric trait by selection either on an individual basis or on the basis of an index incorporating such information. This paper examines the utility of an index of selection that not only combines phenotypic and molecular information on the trait under improvement but also combines similar information on one or more auxiliary traits. The accuracy of such a selection procedure has been theoretically studied for sufficiently large populations so that the effects of detected quantitative trait loci can be perfectly estimated. The theory is illustrated numerically by considering one auxiliary trait. It is shown that the use of an auxiliary trait improves the selection accuracy; and, hence, the relative efficiency of index selection compared to individual selection which is based on the same intensity of selection. This is particularly so for higher magnitudes of residual genetic correlation and environmental correlation having opposite signs, lower values of the proportion of genetic variation in the main trait associated with the markers, negligible proportion of genetic variation in the auxiliary trait associated with the markers, and lower values of the heritability of the main trait but higher values of the heritability of the auxiliary trait.

  12. Vehicle Integrated Photovoltaics for Compression Ignition Vehicles: An Experimental Investigation of Solar Alkaline Water Electrolysis for Improving Diesel Combustion and a Solar Charging System for Reducing Auxiliary Engine Loads (United States)

    Negroni, Garry Inocentes

    Vehicle-integrated photovoltaic electricity can be applied towards aspiration of hydrogen-oxygen-steam gas produced through alkaline electrolysis and reductions in auxiliary alternator load for reducing hydrocarbon emissions in low nitrogen oxide indirect-injection compression-ignition engines. Aspiration of 0.516 ± 0.007 liters-per-minute of gas produced through alkaline electrolysis of potassium-hydroxide 2wt.% improves full-load performance; however, part-load performance decreases due to auto-ignition of aspirated gas prior to top-dead center. Alternator load reductions offer improved part-load and full-load performance with practical limitations resulting from accessory electrical loads. In an additive approach, solar electrolysis can electrochemically convert solar photovoltaic electricity into a gas comprised of stoichiometric hydrogen and oxygen gas. Aspiration of this hydrogen-oxygen gas enhances combustion properties decreasing emissions and increased combustion efficiency in light-duty diesel vehicles. The 316L stainless steel (SS) electrolyser plates are arranged with two anodes and three cathodes space with four bipolar plates delineating four stacks in parallel with five cells per stack. The electrolyser was tested using potassium hydroxide 2 wt.% and hydronium 3wt.% at measured voltage and current inputs. The flow rate output from the reservoir cell was measured in parallel with the V and I inputs producing a regression model correlating current input to flow rate. KOH 2 wt.% produced 0.005 LPM/W, while H9O44 3 wt.% produced less at 0.00126 LPM/W. In a subtractive approach, solar energy can be used to charge a larger energy storage device, as is with plug-in electric vehicles, in order to alleviate the engine of the mechanical load placed upon it by the vehicles electrical accessories through the alternator. Solar electrolysis can improve part-load emissions and full-load performance. The average solar-to-battery efficiency based on the OEM rated

  13. Composition Attacks and Auxiliary Information in Data Privacy

    CERN Document Server

    Ganta, Srivatsava Ranjit; Smith, Adam


    Privacy is an increasingly important aspect of data publishing. Reasoning about privacy, however, is fraught with pitfalls. One of the most significant is the auxiliary information (also called external knowledge, background knowledge, or side information) that an adversary gleans from other channels such as the web, public records, or domain knowledge. This paper explores how one can reason about privacy in the face of rich, realistic sources of auxiliary information. Specifically, we investigate the effectiveness of current anonymization schemes in preserving privacy when multiple organizations independently release anonymized data about overlapping populations. 1. We investigate composition attacks, in which an adversary uses independent anonymized releases to breach privacy. We explain why recently proposed models of limited auxiliary information fail to capture composition attacks. Our experiments demonstrate that even a simple instance of a composition attack can breach privacy in practice, for a large ...

  14. Auxiliary en-bloc liver-small bowel transplantation with partial pancreas preservation in pigs

    Institute of Scientific and Technical Information of China (English)

    Zhen-Yu Yin; Xiao-Dong Ni; Feng Jiang; Ning Li; You-Sheng Li; Xiao-Ming Wang; Jie-Shou Li


    AIM: The aim of this study was to describe an auxiliary combined liver-small bowel transplantation model with the preservation of duodenum, head of pancreas and hepatic biliary system in pigs. The technique, feasibility, security and immunosuppression were commented.METHODS: Forty outbred long-white pigs were randomized into two groups, and the auxiliary composite liver/small bowel allotransplantations were undertaken in 10 long-white pigs in each group with the recipient liver preserved.Group A was not treated with immunosuppressive drugs while group B was treated with cyclosporine A and methylprednisolone after operation. The hemodynamic changes and amylase of body fluid (including blood, urine and abdominal drain) were analyzed.RESULTS: The average survival time of the animals was 10±1.929 d (6 to 25 d) in group A while more than 30 d in group B. The pigs could tolerate the hemodynamic fluctuation during operation and the hemodynamic parameters recovered to normal 2 h after blood reperfusion. The transient high amylase level was decreased to normal one week after operation and autopsy showed no pancreatitis.CONCLUSION: Auxiliary en-bloc liver-small bowel transplantation with partial pancreas preservation is a feasible and safe model with simplified surgical techniques for composite liver/small bowel transplantation. This model may be used as a preclinical training model for clinical transplantation method, clinical liver-small bowel transplantation related complication research, basic research including immunosuppressive treatment, organ preservation, acute rejection, chronic rejection, immuno-tolerance and xenotransplantation.

  15. Modulatory mechanisms and multiple functions of somatodendritic A-type K+ channel auxiliary subunits

    Directory of Open Access Journals (Sweden)

    Henry Hungtao Jerng


    Full Text Available Auxiliary subunits are non-conducting, modulatory components of the multi-protein ion channel complexes that underlie normal neuronal signaling. They interact with the pore-forming α-subunits to modulate surface distribution, ion conductance, and channel gating properties. For the somatodendritic subthreshold A-type potassium (ISA channel based on Kv4 α-subunits, two types of auxiliary subunits have been extensively studied: Kv channel-interacting proteins (KChIPs and dipeptidyl peptidase-like proteins (DPLPs. KChIPs are cytoplasmic calcium-binding proteins that interact with intracellular portions of the Kv4 subunits, whereas DPLPs are type II transmembrane proteins that associate with the Kv4 channel core. Both KChIPs and DPLPs genes contain multiple start sites that are used by various neuronal populations to drive the differential expression of functionally distinct N-terminal variants. In turn, these N-terminal variants generate tremendous functional diversity across the nervous system. Here, we focus our review on (1 the molecular mechanism underlying the unique properties of different N-terminal variants, (2 the shaping of native ISA properties by the concerted actions of KChIPs and DPLP variants, and (3 the surprising ways that KChIPs and DPLPs coordinate the activity of multiple channels to fine-tune neuronal excitability. Unlocking the unique contributions of different auxiliary subunit N-terminal variants may provide an important opportunity to develop novel targeted therapeutics to treat numerous neurological disorders.

  16. A new approach on auxiliary vehicle assignment in capacitated location routing problem (United States)

    Bashiri, Mahdi; Rasoulinejad, Zeinab; Fallahzade, Ehsan


    The location routing problem (LRP) considers locating depots and vehicle routing decisions simultaneously. In classic LRP the number of customers in each route depends on the capacity of the vehicle. In this paper a capacitated LRP model with auxiliary vehicle assignment is presented in which the length of each route is not restricted by main vehicle capacity. Two kinds of vehicles are considered: main vehicles with higher capacity and fixed cost and auxiliary vehicles with lower capacity and fixed cost. The auxiliary vehicles can be added to the transportation system as an alternative strategy to cover the capacity limitations and they are just used to transfer goods from depots to vehicles and cannot serve the customers by themselves. To show the applicability of the proposed model, some numerical examples derived from the well-known instances are used. Moreover the model has been solved by some meta-heuristics for large sized instances. The results show the efficiency of the proposed model and the solution approach, considering the classic model and the exact solution approach, respectively.

  17. Efficient auxiliary-mode approach for time-dependent nanoelectronics (United States)

    Popescu, Bogdan Stefan; Croy, Alexander


    A new scheme for numerically solving the equations arising in the time-dependent non-equilibrium Green's function formalism is developed. It is based on an auxiliary-mode expansion of the self-energies which convert the complicated set of integro-differential equations into a set of ordinary differential equations. In the new scheme all auxiliary matrices are replaced by vectors or scalars. This drastically reduces the computational effort and memory requirements of the method, rendering it applicable to topical problems in electron quantum optics and molecular electronics. As an illustrative example we consider the dynamics of a Leviton wave-packet in a 1D wire.

  18. Improving Semi-Supervised Learning with Auxiliary Deep Generative Models

    DEFF Research Database (Denmark)

    Maaløe, Lars; Sønderby, Casper Kaae; Sønderby, Søren Kaae

    Deep generative models based upon continuous variational distributions parameterized by deep networks give state-of-the-art performance. In this paper we propose a framework for extending the latent representation with extra auxiliary variables in order to make the variational distribution more...... expressive for semi-supervised learning. By utilizing the stochasticity of the auxiliary variable we demonstrate how to train discriminative classifiers resulting in state-of-the-art performance within semi-supervised learning exemplified by an 0.96% error on MNIST using 100 labeled data points. Furthermore...

  19. Sampling designs dependent on sample parameters of auxiliary variables

    CERN Document Server

    Wywiał, Janusz L


    The book offers a valuable resource for students and statisticians whose work involves survey sampling. An estimation of the population parameters in finite and fixed populations assisted by auxiliary variables is considered. New sampling designs dependent on moments or quantiles of auxiliary variables are presented on the background of the classical methods. Accuracies of the estimators based on original sampling design are compared with classical estimation procedures. Specific conditional sampling designs are applied to problems of small area estimation as well as to estimation of quantiles of variables under study. .

  20. Vanishing auxiliary variables in PPS sampling - with applications in microscopy

    DEFF Research Database (Denmark)

    Andersen, Ina Trolle; Hahn, Ute; Jensen, Eva B. Vedel

    Recently, non-uniform sampling has been suggested in microscopy to increase efficiency. More precisely, sampling proportional to size (PPS) has been introduced where the probability of sampling a unit in the population is proportional to the value of an auxiliary variable. Unfortunately, vanishing...... auxiliary variables are a common phenomenon in microscopy and, accordingly, part of the population is not accessible, using PPS sampling. We propose a modification of the design, for which an optimal solution can be found, using a model assisted approach. The optimal design has independent interest...

  1. Analysis and Measurement of NOx Emissions in Port Auxiliary Vessels

    Directory of Open Access Journals (Sweden)

    German de Melo Rodriguez


    Full Text Available This paper is made NOx pollution emitted by port auxiliary vessels, specifically by harbour tugs, due to its unique operating characteristics of operation, require a large propulsion power changes discontinuously, also possess some peculiar technical characteristics, large tonnage and high propulsive power, that differentiate them from other auxiliary vessels of the port. Taking into account all the above features, there are no studies of the NOx emission engines caused by different working regimes of power because engine manufacturers have not measured these emissions across the range of operating power, but usually we only report the pollution produced by its engines to a maximum continuous power.


    Institute of Scientific and Technical Information of China (English)

    Tzanio V. Kolev; Panayot S. Vassilevski


    In this paper we review a number of auxiliary space based preconditioners for the second order definite and semi-definite Maxwell problems discretized with the lowest order Nedelec finite elements. We discuss the parallel implementation of the most promising of these methods, the ones derived from the recent Hiptmair-Xu (HX) auxiliary space decomposition [Hiptmair and Xu, SIAM J. Numer. Anal., 45 (2007), pp. 2483-2509]. An extensive set of numerical experiments demonstrate the scalability of our implementation on large-scale H(curl) problems.

  3. Outcome- and auxiliary-dependent subsampling and its statistical inference. (United States)

    Wang, Xiaofei; Wu, Yougui; Zhou, Haibo


    The performance of a biomarker predicting clinical outcome is often evaluated in a large prospective study. Due to high costs associated with bioassay, investigators need to select a subset from all available patients for biomarker assessment. We consider an outcome- and auxiliary-dependent subsampling (OADS) scheme, in which the probability of selecting a patient into the subset depends on the patient's clinical outcome and an auxiliary variable. We proposed a semiparametric empirical likelihood method to estimate the association between biomarker and clinical outcome. Asymptotic properties of the estimator are given. Simulation study shows that the proposed method outperforms alternative methods.

  4. Space Shuttle Orbiter auxiliary power unit status (United States)

    Reck, M.; Loken, G.; Horton, J.; Lukens, W.; Scott, W.; Baughman, J.; Bauch, T.

    An overview of the United States Space Shuttle Orbiter APU, which provides power to the Orbiter vehicle hydraulic system, is presented. Three complete APU systems, each with its own separate fuel system, supply power to three dedicated hydraulic systems. These in turn provide power to all Orbiter vehicle critical flight functions including launch, orbit, reentry, and landing. The basic APU logic diagram is presented. The APU includes a hydrazine-powered turbine that drives a hydraulic pump and various accessories through a high-speed gearbox. The APU also features a sophisticated thermal management system designed to ensure safe and reliable operation in the various launch, orbit, reentry, and landing environments.

  5. Solutions of system of P1 equations without use of auxiliary differential equations coupled; Solucoes do sistema de equacoes P1 sem o uso de equacoes diferenciais auxiliares acopladas

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Aquilino Senra; Silva, Fernando Carvalho da; Cardoso, Carlos Eduardo Santos [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear


    The system of P1 equations is composed by two equations coupled itself one for the neutron flux and other for the current. Usually this system is solved by definitions of two integrals parameters, which are named slowing down densities of the flux and the current. Hence, the system P1 can be change from integral to only two differential equations. However, there are two new differentials equations that may be solved with the initial system. The present work analyzes this procedure and studies a method, which solve the P1 equations directly, without definitions of slowing down densities. (author)

  6. Auxiliary equation method for solving nonlinear partial differential equations

    Energy Technology Data Exchange (ETDEWEB)

    Sirendaoreji,; Jiong, Sun


    By using the solutions of an auxiliary ordinary differential equation, a direct algebraic method is described to construct several kinds of exact travelling wave solutions for some nonlinear partial differential equations. By this method some physically important nonlinear equations are investigated and new exact travelling wave solutions are explicitly obtained with the aid of symbolic computation.

  7. Search and Rescue. Auxiliary Operational Specialty Course. Student Text. (United States)

    Coast Guard, Washington, DC.

    This text, based on the National Search and Rescue (SAR) Plan, was prepared to provide a course of study on common procedures for SAR operations so that any basically qualified person in the U.S. Coast Guard Auxiliary can effectively accomplish a SAR mission and act as on-scene commander if required. There are 13 chapters: Introduction to Search…

  8. Power consumption of the ASCV and auxiliary equipment

    DEFF Research Database (Denmark)

    Pedersen, Knud Ole Helgesen; Pedersen, Jørgen Kaas


    Operating an ASCV requires power - to cover the losses in the ASCV itself and to run auxiliary equipment. It is necessary to take this power consumption into account when considering the economical aspects of installing an ASCV.Field measurements of this consumption of the ASCV in Rejsby Hede...

  9. Restarting Automata with Auxiliary Symbols and Small Lookahead

    DEFF Research Database (Denmark)

    Schluter, Natalie Elaine


    We present a study on lookahead hierarchies for restarting automata with auxiliary symbols and small lookahead. In particular, we show that there are just two different classes of languages recognised by RRWW automata, through the restriction of lookahead size. We also show that the respective...

  10. 75 FR 57200 - National Poultry Improvement Plan and Auxiliary Provisions (United States)


    ... Poultry Improvement Plan and Auxiliary Provisions AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Proposed rule. SUMMARY: We are proposing to amend the National Poultry Improvement Plan (the Plan... current with changes in the poultry industry and provide for the use of new sampling and...

  11. 76 FR 22295 - National Poultry Improvement Plan and Auxiliary Provisions (United States)


    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection 9 CFR Part 145 RIN 0579-AD21 National Poultry Improvement Plan and Auxiliary Provisions Correction In rule document 2011-6539 appearing on pages 15791-15798 in the issue...

  12. 40 CFR 1033.510 - Auxiliary power units. (United States)


    ... locomotive is equipped with an auxiliary power unit (APU) that operates during an idle shutdown mode, you must account for the APU's emissions rates as specified in this section, unless the APU is part of an... emission rate (g/hr) as specified in § 1033.530. Add the APU emission rate (g/hr) that you determine...

  13. Auxiliary anatomical labels for joint segmentation and atlas registration (United States)

    Gass, Tobias; Szekely, Gabor; Goksel, Orcun


    This paper studies improving joint segmentation and registration by introducing auxiliary labels for anatomy that has similar appearance to the target anatomy while not being part of that target. Such auxiliary labels help avoid false positive labelling of non-target anatomy by resolving ambiguity. A known registration of a segmented atlas can help identify where a target segmentation should lie. Conversely, segmentations of anatomy in two images can help them be better registered. Joint segmentation and registration is then a method that can leverage information from both registration and segmentation to help one another. It has received increasing attention recently in the literature. Often, merely a single organ of interest is labelled in the atlas. In the presense of other anatomical structures with similar appearance, this leads to ambiguity in intensity based segmentation; for example, when segmenting individual bones in CT images where other bones share the same intensity profile. To alleviate this problem, we introduce automatic generation of additional labels in atlas segmentations, by marking similar-appearance non-target anatomy with an auxiliary label. Information from the auxiliary-labeled atlas segmentation is then incorporated by using a novel coherence potential, which penalizes differences between the deformed atlas segmentation and the target segmentation estimate. We validated this on a joint segmentation-registration approach that iteratively alternates between registering an atlas and segmenting the target image to find a final anatomical segmentation. The results show that automatic auxiliary labelling outperforms the same approach using a single label atlasses, for both mandibular bone segmentation in 3D-CT and corpus callosum segmentation in 2D-MRI.

  14. 高校一体化医学仪器技能实验平台及其辅助管理系统构建%On the Construction of Integrative Medical Instrument Skills Experiment Platform and Its Auxiliary Management System in Higher Learning Institutes

    Institute of Scientific and Technical Information of China (English)



    高校一体化医学仪器技能实验平台实验室的建设设计要体现出职业化教育的特色,注重学生个体实践技能和能力的培养,遵循以实验室主题功能建设为主体的设计理念。在建设平台的同时,要加强学生成绩评价与考核、毕业设计、开发环境建设、实验室管理、产学研融合和社会化服务等辅助管理系统的建设,以打造一体化医学仪器技能实验室。%The design for the construction of integrative medical instrument skills experimental platform should embody the characteristics of professional education, pay attention to the cultivation of individual practical skills and abilities of students and regard the lab subject function construction as the main design concept. While constructing the platform, it is necessary to strengthen the construction of auxiliary management system that is consisted of the evaluation and assessment for student performance, graduation design, development environment construction, laboratory management, production-learning-research integration, social service, so as to create integrative medical instrument skills laboratory.

  15. 河南省高考报志愿测评辅助系统中的职业量表的编制%The Compilation of Professional Scale in the Assessment Auxiliary System of the Choice of Colleges in the College-entrance Examination in Henan Province

    Institute of Scientific and Technical Information of China (English)



    According to the theory of three-dimensional spherical mode and Holland vocational interest test theory,we com-piled the vocational interest forecast test questionnaire for the college students in Henan province on the basis of the professional classifications of Henan province.The results shows that there are 18 kinds of vocational interest dimensions by using the SPSS for data analysis.Then we construct the Henan college students'vocational interest structure mode and developed the own theo-retical basis of auxiliary system of the assessment.Finally we formed the formal college students vocational interest question-naire of Henan province.%本研究以三维球型模型理论和霍兰德职业兴趣测评理论,结合河南省职业分类,编制了河南省高校大学生职业兴趣预测验问卷,通过spss软件对数据进行因素分析,得出18种职业兴趣维度,建构河南大学生职业兴趣结构模型,形成河南省高考报志愿测评系统专属的理论基础。最终形成了正式的河南省高校大学生职业兴趣问卷。

  16. Engineering the CernVM-Filesystem as a High Bandwidth Distributed Filesystem for Auxiliary Physics Data

    Energy Technology Data Exchange (ETDEWEB)

    Dykstra, D. [Fermilab; Bockelman, B. [Nebraska U.; Blomer, J. [CERN; Herner, K. [Fermilab; Levshina, T. [Fermilab; Slyz, M. [Fermilab


    A common use pattern in the computing models of particle physics experiments is running many distributed applications that read from a shared set of data files. We refer to this data is auxiliary data, to distinguish it from (a) event data from the detector (which tends to be different for every job), and (b) conditions data about the detector (which tends to be the same for each job in a batch of jobs). Relatively speaking, conditions data also tends to be relatively small per job where both event data and auxiliary data are larger per job. Unlike event data, auxiliary data comes from a limited working set of shared files. Since there is spatial locality of the auxiliary data access, the use case appears to be identical to that of the CernVM- Filesystem (CVMFS). However, we show that distributing auxiliary data through CVMFS causes the existing CVMFS infrastructure to perform poorly. We utilize a CVMFS client feature called 'alien cache' to cache data on existing local high-bandwidth data servers that were engineered for storing event data. This cache is shared between the worker nodes at a site and replaces caching CVMFS files on both the worker node local disks and on the site's local squids. We have tested this alien cache with the dCache NFSv4.1 interface, Lustre, and the Hadoop Distributed File System (HDFS) FUSE interface, and measured performance. In addition, we use high-bandwidth data servers at central sites to perform the CVMFS Stratum 1 function instead of the low-bandwidth web servers deployed for the CVMFS software distribution function. We have tested this using the dCache HTTP interface. As a result, we have a design for an end-to-end high-bandwidth distributed caching read-only filesystem, using existing client software already widely deployed to grid worker nodes and existing file servers already widely installed at grid sites. Files are published in a central place and are soon available on demand throughout the grid and cached

  17. Engineering the CernVM-Filesystem as a High Bandwidth Distributed Filesystem for Auxiliary Physics Data (United States)

    Dykstra, D.; Bockelman, B.; Blomer, J.; Herner, K.; Levshina, T.; Slyz, M.


    A common use pattern in the computing models of particle physics experiments is running many distributed applications that read from a shared set of data files. We refer to this data is auxiliary data, to distinguish it from (a) event data from the detector (which tends to be different for every job), and (b) conditions data about the detector (which tends to be the same for each job in a batch of jobs). Relatively speaking, conditions data also tends to be relatively small per job where both event data and auxiliary data are larger per job. Unlike event data, auxiliary data comes from a limited working set of shared files. Since there is spatial locality of the auxiliary data access, the use case appears to be identical to that of the CernVM- Filesystem (CVMFS). However, we show that distributing auxiliary data through CVMFS causes the existing CVMFS infrastructure to perform poorly. We utilize a CVMFS client feature called "alien cache" to cache data on existing local high-bandwidth data servers that were engineered for storing event data. This cache is shared between the worker nodes at a site and replaces caching CVMFS files on both the worker node local disks and on the site's local squids. We have tested this alien cache with the dCache NFSv4.1 interface, Lustre, and the Hadoop Distributed File System (HDFS) FUSE interface, and measured performance. In addition, we use high-bandwidth data servers at central sites to perform the CVMFS Stratum 1 function instead of the low-bandwidth web servers deployed for the CVMFS software distribution function. We have tested this using the dCache HTTP interface. As a result, we have a design for an end-to-end high-bandwidth distributed caching read-only filesystem, using existing client software already widely deployed to grid worker nodes and existing file servers already widely installed at grid sites. Files are published in a central place and are soon available on demand throughout the grid and cached locally on the

  18. Light wire auxiliaries with pre-adjusted edgewise appliance to control individual incisor torque

    Directory of Open Access Journals (Sweden)

    Sharanya Sabrish


    The use of light wire auxiliaries have definite advantages and hence should be a part of our armamentarium to handle such cases. Light wire auxiliaries offer us a biomechanically superior and economical alternative to apply torque forces on incisors.


    Directory of Open Access Journals (Sweden)

    Vardanyan Gumedin Surenovich


    Full Text Available New approach to selection of the principal measurement units system, different from the one used in the conventional dimensional theory, is proposed in the article. The new approach expands the capacities of dimensional analysis in the resolution of problems of deformable solid mechanics.

  20. The Bantu-Romance-Greek connection revisited: Processing constraints in auxiliary and clitic placement from a cross-linguistic perspective

    Directory of Open Access Journals (Sweden)

    Stergios Chatzikyriakidis


    Full Text Available This paper explores a connection between Romance and Greek on the one hand, and Bantu on the other. More specifically, we look at auxiliary placement in Rangi and clitic placement in Tobler Mussafia languages, with a special emphasis on Cypriot Greek, and argue that a common explanation for their distribution can be found once a move into a dynamic framework is made. Rangi exhibits an unusual word order alternation in auxiliary constructions under which the position of the auxiliary appears to be sensitive to an element appearing at the left periphery of the clause. A similar sensitivity to a left-peripheral element can be seen to regulate clitic placement in Cypriot Greek (and generally in the so-called Tobler Mussafia clitic languages. The paper presents a parsing-oriented account of these two phenomena in the Dynamic Syntax framework, arguing that the similarities in syntactic distribution are the result of the encoding in the lexicon of processing strategies that were potentially pragmatic preferences in earlier stages of the respective languages. The account thus leans on the role played by the lexical entries for auxiliary and clitic forms, as well as the assumption that underspecification is inherent in the process of establishing meaning in context. The account is further supplemented by possible pathways of diachronic change that could have given rise to the systems found in present day varieties.

  1. BE, DO, and Modal Auxiliaries of 3-Year-Old African American English Speakers (United States)

    Newkirk-Turner, Brandi L.; Oetting, Janna B.; Stockman, Ida J.


    Purpose: This study examined African American English--speaking children's use of BE, DO, and modal auxiliaries. Method: The data were based on language samples obtained from 48 three-year-olds. Analyses examined rates of marking by auxiliary type, auxiliary surface form, succeeding element, and syntactic construction and by a number of child…

  2. An Evaluative Survey of the Use of Auxiliary Personnel in Secondary School Departments of English. (United States)

    Getz, Howard Gene

    In order (1) to determine how auxiliaries (lay readers and instructional, clerical, and housekeeping aides) were used in secondary English departments, (2) to determine the reasons for English departments discontinuing the use of auxiliaries, and (3) to evaluate the way auxiliaries were used, questionnaires were sent to two groups: schools using…

  3. 14 CFR 33.96 - Engine tests in auxiliary power unit (APU) mode. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Engine tests in auxiliary power unit (APU... Engine tests in auxiliary power unit (APU) mode. If the engine is designed with a propeller brake which... in operation, and remain stopped during operation of the engine as an auxiliary power unit (“APU...

  4. 煤矿副斜井无轨胶轮车阻车系统研制与应用%Development of Car-resistance System of Trackless Rubber Vehicle for Auxiliary Slope and Its Application

    Institute of Scientific and Technical Information of China (English)

    李正甲; 刘邹县; 赵宏伟


    In coal mines with shallow-buried and nearly-horizontal footrill or slope lift and transportation, most were designed as slope transportation with trackless rubber vehicle. But domestic car-resistance system design and development of trackless rubber vehicle was blank. This design included electric control technology, radio frequency identification technology, pneumatic control technology, car-re-sistance device, etc. By monitoring vehicle speed with radar speed measurement, vehicle-mounted remote-control as backup protection, when vehicle was out of control, electric system acted timely, car-resistance foam unhooked and realized flexible car-resistance. This system could realize vehicle monitoring, location, data and image upload according to users’ need.%在浅埋深、近水平开采的平硐或斜井提升运输煤矿中,大多设计为斜井无轨运输,无轨胶轮车使用比较广泛。但是国内无轨胶轮车防跑车系统的设计与研制属于空白。本设计包括电气控制技术、无线射频技术、气动控制技术、阻车装置等,通过雷达测速监测车辆运行速度,车载遥控器作为后备保护,当车辆失控时电气系统及时动作,阻车泡沫4s内脱钩到位,起到柔性阻车的效果。根据用户需要本系统还可以实现车辆监测、定位、数据、图像上传等功能。

  5. Replacement of electrical protection of generation (main generator, main transformer and auxiliary transformers) and new associated monitoring system; Sustitucion de portecciones electricas de generacion (genrador principal, transformador principal y transformadores auxiliares) y nuevo sistema de supervision asociado

    Energy Technology Data Exchange (ETDEWEB)

    Archilla, J.


    The replacement of the electrical protection of generation is a technological quantum leap, since moving from an analog system (known by) (all, intuitive and visual) to a digital (integrates the hardware on a single computer, much more powerful and programmable). The keys to overcoming the challenge are know to manage the technological leap, the operational limitations of plant (keep operating the)preferred sources of energy) and make a good design (including a review independent of the configuration of the relays, taking into account the experience (operational available).

  6. 分体式老年人/残疾人智能室内助动系统的设计与实现%Design and implementation of a split intelligent indoor auxiliary system for the aged and handicapped

    Institute of Scientific and Technical Information of China (English)

    任亚楠; 邹伟; 高舒; 叶爱学; 马岩; 原魁


    A separable intelligent indoor movement-aided system composed of an intelligent wheelchair and a U-shaped bed was designed and implemented for the aged and handicapped.The system has the functions of posture alteration , wheelchair aiding, and autonomous bed-chair docking.The intelligent wheelchair can alter its posture among sitting, lying and standing smoothly and safely, while it can be docked into the U-shaped bed automatically and reconfigured to a flat stationary bed.The method for design of some key mechanical sizes was derived, and their influences on the wheelchair's force-bearing under different postures was analyzed, which were used to guide the implementation of the wheelchair' s posture-alteration control.For the docking between the wheelchair and the U-shaped bed, an autonomous docking control strategy was presented based on visual servo.First, the U-shaped bed was identified and its relative pose to the wheelchair was localized according to some Euclid features of specific symbol.Then, the line trajectory tracking was performed to make the wheelchair dock into the bed precisely by using vision feedback and dead reckoning simultaneously.The prototype of the movement-aided system was given, and the experiments validated the feasibility and effectiveness of the designing method and the control algorithm.%针对老年人/残疾人长期卧床以及椅床移位护理强度大的问题,采用分体式设计实现了一种具有体位变换、轮椅助动和自主床椅对接功能的智能室内助动系统.对各姿态下轮椅的尺寸设计和受力情况进行了理论计算和分析,据此实现了体位变换控制;对于狭窄空间下轮椅与床体的自动对接,给出了一种基于视觉伺服的自主对接控制算法:首先通过检测特定标志物识别床体,确定轮椅相对于床体坐标系的位姿;然后依据视觉反馈和里程计航迹推演进行直线跟踪,控制轮椅到达床体中心.实验证明了上述系统及其

  7. 基于辅助线滞生法的Auto CAD R12参数化设计系统%Auto CAD R12 Parametric Design System Based on the Detained Auxiliary Line

    Institute of Scientific and Technical Information of China (English)

    郭启全; 周克绳


    本文提出了一种在Auto CAD R12环境下,用C语言(基于ADS)开发二维图形参数化设计的新方法辅助线滞生法.解决了辅助线滞生法与ADS具体结合中的技术难题;阐述了实元素悬挂到辅助元素上的新思想,实现了尺寸驱动;为用户众多的Auto CAD R12增加了新功能.基于该方法的Auto CAD R12参数化设计系统(Auto CAD R12 Parametric Design System--APDS)已用于悬挂输送机、管道油阀及半挂自卸车的设计绘图.

  8. An Analytical Method of Auxiliary Sources Solution for Plane Wave Scattering by Impedance Cylinders - A Reference Solution for the Numerical Method of Auxiliary Sources

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav


    To facilitate the validation of the numerical Method of Auxiliary Sources an analytical Method of Auxiliary Sources solution is derived in this paper. The Analytical solution is valid for transverse magnetic, and electric, plane wave scattering by circular impedance Cylinders, and it is derived...... of the numerical Method of Auxiliary Sources for a range of scattering configurations....... with their singularities at different positions away from the origin. The transformation necessitates a truncation of the wave transformation but the inaccuracy introduced hereby is shown to be negligible. The analytical Method of Auxiliary Sources solution is employed as a reference to investigate the accuracy...

  9. Auxiliary field loop expansion of the effective action for a class of stochastic partial differential equations (United States)

    Cooper, Fred; Dawson, John F.


    We present an alternative to the perturbative (in coupling constant) diagrammatic approach for studying stochastic dynamics of a class of reaction diffusion systems. Our approach is based on an auxiliary field loop expansion for the path integral representation for the generating functional of the noise induced correlation functions of the fields describing these systems. The systems we consider include Langevin systems describable by the set of self interacting classical fields ϕi(x , t) in the presence of external noise ηi(x , t) , namely (∂t - ν∇2) ϕ - F [ ϕ ] = η, as well as chemical reaction annihilation processes obtained by applying the many-body approach of Doi-Peliti to the Master Equation formulation of these problems. We consider two different effective actions, one based on the Onsager-Machlup (OM) approach, and the other due to Janssen-deGenneris based on the Martin-Siggia-Rose (MSR) response function approach. For the simple models we consider, we determine an analytic expression for the Energy landscape (effective potential) in both formalisms and show how to obtain the more physical effective potential of the Onsager-Machlup approach from the MSR effective potential in leading order in the auxiliary field loop expansion. For the KPZ equation we find that our approximation, which is non-perturbative and obeys broken symmetry Ward identities, does not lead to the appearance of a fluctuation induced symmetry breakdown. This contradicts the results of earlier studies.

  10. [The design of bionic left ventricular auxiliary pump]. (United States)

    Jin, Henglin; Hu, Xiaobing; Du, Lei


    This paper reports a novel design of bionic left ventricular auxiliary pump, and the characteristic is that elastic diaphragm of pump driven by hydraulic, having smooth, reliable blood supply, can prevent blood clots, can use the flow sensor, pressure sensor detection showing the blood pressure and blood volume at the inlet and outlet of the pump. The pump can go with heart rate synchronization or asynchronous auxiliary by the R wave of human body's ECG. The design goal is realization of bionic throb. Through the animal experiment, the blood pressure waveforms are close to expectations, stable flow can stroke according to the set value, which prove that the pump can meet the requirement for heart disease patients for bionic left ventricular assistant.

  11. Power spectrum with auxiliary fields in de Sitter space

    Energy Technology Data Exchange (ETDEWEB)

    Mohsenzadeh, M. [Islamic Azad University, Department of Physics, Qom Branch, Qom (Iran, Islamic Republic of); Tanhayi, M.R. [Islamic Azad University, Department of Physics, Central Tehran Branch, Tehran (Iran, Islamic Republic of); Yusofi, E. [Islamic Azad University, Department of Physics, Science and Research Ayatollah Amoli Branch, Amol, Mazandaran (Iran, Islamic Republic of)


    We use the auxiliary fields and (excited-) de Sitter solutions to study the standard power spectrum of primordial fluctuations of a scalar field in the early universe. The auxiliary fields are the negative norm solutions of the field equation and as is shown, with a fixed boundary condition, utilizing these states results in a finite power spectrum without any infinity. The power spectrum is determined by the de Sitter solutions up to some corrections and the space-time symmetry is not broken in this point of view. The modulation to the power spectrum is of order ((H)/(Λ)){sup 2}, where H is the Hubble parameter and Λ is the energy scale, e.g., the Planck scale. (orig.)


    Directory of Open Access Journals (Sweden)

    I. A. Petrova


    Full Text Available Subject of Research.We propose to modify the EA+RL method, which increases efficiency of evolutionary algorithms by means of auxiliary objectives. The proposed modification is compared to the existing objective selection methods on the example of travelling salesman problem. Method. In the EA+RL method a reinforcement learning algorithm is used to select an objective – the target objective or one of the auxiliary objectives – at each iteration of the single-objective evolutionary algorithm.The proposed modification of the EA+RL method adopts this approach for the usage with a multiobjective evolutionary algorithm. As opposed to theEA+RL method, in this modification one of the auxiliary objectives is selected by reinforcement learning and optimized together with the target objective at each step of the multiobjective evolutionary algorithm. Main Results.The proposed modification of the EA+RL method was compared to the existing objective selection methods on the example of travelling salesman problem. In the EA+RL method and its proposed modification reinforcement learning algorithms for stationary and non-stationary environment were used. The proposed modification of the EA+RL method applied with reinforcement learning for non-stationary environment outperformed the considered objective selection algorithms on the most problem instances. Practical Significance. The proposed approach increases efficiency of evolutionary algorithms, which may be used for solving discrete NP-hard optimization problems. They are, in particular, combinatorial path search problems and scheduling problems.

  13. Enhanced Deposition Uniformity via an Auxiliary Electrode in Massive Electrospinning. (United States)

    Wu, Dezhi; Xiao, Zhiming; Deng, Lei; Sun, Yu; Tan, Qiulin; Dong, Linxi; Huang, Shaohua; Zhu, Rui; Liu, Yifang; Zheng, Wanxi; Zhao, Yang; Wang, Lingyun; Sun, Daoheng


    Uniform deposition of nanofibers in the massive electrospinning process is critical in the industrial applications of nanofibers. Tip-Induced Electrospinning (TIE) is a cost-effective large-scale nanofiber-manufacturing method, but it has poor deposition uniformity. An auxiliary conductive electrode connected to the emitting electrode was introduced to improve the deposition uniformity of the nanofibers. The effects of the auxiliary electrode shape, the tilted angles and the position of the boat-like electrode on the electric field distribution, the diameter of the nanofibers, the jet control and the deposition uniformity were explored by using finite element analysis of the electric field and experiments. Experiments showed that the boat-like electrode at 20 mm above the reservoir bottom with a 5° tilted angle helped to decrease the relative deposition error of nanofibers in the greatest extent to about 5.66%, indicating such an auxiliary electrode is a good candidate method to greatly improve the deposition uniformity of nanofibers in massive electrospinning.

  14. Bayesian Analysis of Geostatistical Models With an Auxiliary Lattice

    KAUST Repository

    Park, Jincheol


    The Gaussian geostatistical model has been widely used for modeling spatial data. However, this model suffers from a severe difficulty in computation: it requires users to invert a large covariance matrix. This is infeasible when the number of observations is large. In this article, we propose an auxiliary lattice-based approach for tackling this difficulty. By introducing an auxiliary lattice to the space of observations and defining a Gaussian Markov random field on the auxiliary lattice, our model completely avoids the requirement of matrix inversion. It is remarkable that the computational complexity of our method is only O(n), where n is the number of observations. Hence, our method can be applied to very large datasets with reasonable computational (CPU) times. The numerical results indicate that our model can approximate Gaussian random fields very well in terms of predictions, even for those with long correlation lengths. For real data examples, our model can generally outperform conventional Gaussian random field models in both prediction errors and CPU times. Supplemental materials for the article are available online. © 2012 American Statistical Association, Institute of Mathematical Statistics, and Interface Foundation of North America.

  15. 新刑事诉讼法专家辅助人制度的立法缺陷及其完善%Defects and pefection of the experts auxiliary system of the new Criminal Procedural Law

    Institute of Scientific and Technical Information of China (English)



    Because of the scientific and professional characteristics, the expert opinion has been becoming more and more important in the system of evidence, and gradually replaces the confession. However, the prosecution, the defense and the judges don’t have the expertise. Therefore, it is necessary to engage other people with the expertise to help the parties to solve the problems. The new Criminal Procedural Law was able to confirm that, but it is still flawed and must be urgently improved.%专家辅助人制度在新刑事诉法中的确立无疑将有助于推动鉴定人出庭作证效果的实现,确保鉴定意见的真实性和法官对鉴定意见的正确认定。在此之前,民诉法的有关规定和司法实践的积极探索也为刑事诉讼中专家辅助人制度的完善提供了有效参考。但目前我国有关专家辅助人制度的规定,无论是新刑诉法还是司法运作中依然存在缺陷,包括专家辅助人资格不明确、诉讼地位不确定、权利义务和出庭程序欠缺等。这些都亟需通过立法予以进一步完善,以确保专家辅助人制度能够发挥其应有的作用。

  16. Dual-Antenna Terrestrial Laser Scanner Georeferencing Using Auxiliary Photogrammetric Observations

    Directory of Open Access Journals (Sweden)

    Benjamin Wilkinson


    Full Text Available Terrestrial laser scanning typically requires the use of artificial targets for registration and georeferencing the data. This equipment can be burdensome to transport and set up, representing expense in both time and labor. Environmental factors such as terrain can sometimes make target placement dangerous or impossible, or lead to weak network geometry and therefore degraded product accuracy. The use of additional sensors can help reduce the required number of artificial targets and, in some cases, eliminate the need for them altogether. The research presented here extends methods for direct georeferencing of terrestrial laser scanner data using a dual GNSS antenna apparatus with additional photogrammetric observations from a scanner-mounted camera. Novel combinations of observations and processing methods were tested on data collected at two disparate sites in order to find the best method in terms of processing efficiency and product quality. In addition, a general model for the scanner and auxiliary data is given which can be used for least-squares adjustment and uncertainty estimation in similar systems with varied and diverse configurations. We found that the dual-antenna system resulted in cm-level accuracy practical for many applications and superior to conventional one-antenna systems, and that auxiliary photogrammetric observation significantly increased accuracy of the dual-antenna solution.

  17. Effects of C arm X-ray perspective computer auxiliary surgery navigation system on screw fixation in the elderly lumbar vertebrae pedicle%C臂透视计算机辅助导航对老年人腰椎椎弓根螺钉置入术及手术疗效的影响

    Institute of Scientific and Technical Information of China (English)

    张良; 孙常太; 徐宏兵; 张华俦; 王英民


    Objective To investigate the influence of C arm X- ray perspective computer auxiliary surgery navigation system on lumbar vertebral pedicle screw fixation in the elderly.Methods 286 patients(aged≥65 years) treated by lumbar spine post decompress and pedicle screw fixation for lumbar vertebral degeneration were divided into navigation (n=153) or non-navigation (n=133) groups.The amount of blood loss,surgery duration and time of beginning to walk after surgery were measured and compared, the improvement grading was determined by Oswestry disability index (ODI) before surgery and at the last follow-up. Results The surgery duration [(27.6+6.3)ain vs.(33.8±9.9)min],the volume of blood loss[(135.7±21.1)ml vs.(165.4±32.1)ml] and the time of beginning to walk after surgery[(134.6± 12.3)h vs.(169.0±23.9)h] were obviously reduced in navigation group as compared with non-navigation group (P < 0.05). The grading improvement rate by ODI[(76.6±±3.7)%vs.(69.8+6.6)%] was higher in navigation group than in non navigation group (P<0.05). Conclusions Using C arm X-ray perspective computer auxiliary surgery navigation system to lumbar pedicle screws fixation is helpful in the elderly for improving clinical efficacy.%目的 探讨C型臂透视计算机辅助手术导航系统对于老年人腰椎椎弓根螺钉置入术的影响. 方法 对286例65岁及以上行腰椎后路减压内固定的腰椎退行性疾病患者分为导航(153例)和未导航(133例)两组,比较两组患者的术中失血量、手术时问和术后下地时间.应用Oswestry功能障碍指数问卷表(ODI)对所有患者的术前和末次随访评分,计算2次评分的ODI评分改善率. 结果 导航组与未导航组相比,椎弓根手术时间[ (27.6±6.3)min、(33.8±9.9)min]和出血量[(135.7±21.1)ml、(165.4±32.1)ml]减少,术后下地时间[(134.6±12.3)h、(169.0=23.9)h]缩短;ODI评分改善率[(76.6±3.7)%、(69.8±6.6)%]提高. 结论 C型臂透视计算机辅助手术导

  18. Auxiliary ventilation in mining roadways driven with roadheaders: Validated CFD modelling of dust behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Torano, J.; Torno, S.; Menendez, M.; Gent, M. [University of Oviedo, Asturias (Spain)


    The production of dust when driving mining roadways can affect workers health. In addition, there is a decrease in productivity since Mine Safety regulations establish a reduction in the working time depending on the quartz content and dust concentration in the atmosphere. One of the gate roadways of the longwall named E4-S, belonging to the underground coal mine Carbonar SA located in Northern Spain, is being driven by an AM50 roadheader machine. The mined coal has a high coal dust content. This paper presents a study of dust behaviour in two auxiliary ventilation systems by Computational Fluid Dynamics (CFD) models, taking into account the influence of time. The accuracy of these CFD models was assessed by airflow velocity and respirable dust concentration measurements taken in six points of six roadway cross-sections of the mentioned operating coal mine. It is concluded that these models predicted the airflow and dust behaviour at the working face, where the dust source is located, and in different roadways cross-sections behind the working face. As a result, CFD models allow optimization of the auxiliary ventilation system used, avoiding the important deficiencies when it is calculated by conventional methods.

  19. Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power

    Energy Technology Data Exchange (ETDEWEB)

    Vesely, Charles John-Paul [Cummins Power Generation; Fuchs, Benjamin S. [Cummins Power Generation; Booten, Chuck W. [Protonex Technology, LLC


    The following report documents the progress of the Cummins Power Generation (CPG) Diesel Fueled SOFC for Class 7/Class 8 On-Highway Truck Auxiliary Power (SOFC APU) development and final testing under the U.S. Department of Energy (DOE) Energy Efficiency and Renewable Energy (EERE) contract DE-FC36-04GO14318. This report overviews and summarizes CPG and partner development leading to successful demonstration of the SOFC APU objectives and significant progress towards SOFC commercialization. Significant SOFC APU Milestones: Demonstrated: Operation meeting SOFC APU requirements on commercial Ultra Low Sulfur Diesel (ULSD) fuel. SOFC systems operating on dry CPOX reformate. Successful start-up and shut-down of SOFC APU system without inert gas purge. Developed: Low cost balance of plant concepts and compatible systems designs. Identified low cost, high volume components for balance of plant systems. Demonstrated efficient SOFC output power conditioning. Demonstrated SOFC control strategies and tuning methods.

  20. Fuel Cell Auxiliary Power Study Volume 1: RASER Task Order 5 (United States)

    Mak, Audie; Meier, John


    This study evaluated the feasibility of a hybrid solid oxide fuel cell (SOFC) auxiliary power unit (APU) and the impact in a 90-passenger More-Electric Regional Jet application. The study established realistic hybrid SOFC APU system weight and system efficiencies, and evaluated the impact on the aircraft total weight, fuel burn, and emissions from the main engine and the APU during cruise, landing and take-off (LTO) cycle, and at the gate. Although the SOFC APU may be heavier than the current conventional APU, its weight disadvantage can be offset by fuel savings in the higher SOFC APU system efficiencies against the main engine bleed and extraction during cruise. The higher SOFC APU system efficiency compared to the conventional APU on the ground can also provide considerable fuel saving and emissions reduction, particularly at the gate, but is limited by the fuel cell stack thermal fatigue characteristic.

  1. PEMFC Optimization Strategy with Auxiliary Power Source in Fuel Cell Hybrid Vehicle

    Directory of Open Access Journals (Sweden)

    Tinton Dwi Atmaja


    Full Text Available Page HeaderOpen Journal SystemsJournal HelpUser You are logged in as...aulia My Journals My Profile Log Out Log Out as UserNotifications View (27 new ManageJournal Content SearchBrowse By Issue By Author By Title Other JournalsFont SizeMake font size smaller Make font size default Make font size largerInformation For Readers For Authors For LibrariansKeywords CBPNN Displacement FLC LQG/LTR Mixed PMA Ventilation bottom shear stress direct multiple shooting effective fuzzy logic geoelectrical method hourly irregular wave missile trajectory panoramic image predator-prey systems seawater intrusion segmentation structure development pattern terminal bunt manoeuvre Home About User Home Search Current Archives ##Editorial Board##Home > Vol 23, No 1 (2012 > AtmajaPEMFC Optimization Strategy with Auxiliary Power Source in Fuel Cell Hybrid VehicleTinton Dwi Atmaja, Amin AminAbstractone of the present-day implementation of fuel cell is acting as main power source in Fuel Cell Hybrid Vehicle (FCHV. This paper proposes some strategies to optimize the performance of Polymer Electrolyte Membrane Fuel Cell (PEMFC implanted with auxiliary power source to construct a proper FCHV hybridization. The strategies consist of the most updated optimization method determined from three point of view i.e. Energy Storage System (ESS, hybridization topology and control system analysis. The goal of these strategies is to achieve an optimum hybridization with long lifetime, low cost, high efficiency, and hydrogen consumption rate improvement. The energy storage system strategy considers battery, supercapacitor, and high-speed flywheel as the most promising alternative auxiliary power source. The hybridization topology strategy analyzes the using of multiple storage devices injected with electronic components to bear a higher fuel economy and cost saving. The control system strategy employs nonlinear control system to optimize the ripple factor of the voltage and the current

  2. Auxiliary principle and fuzzy variational-like inequalities

    Directory of Open Access Journals (Sweden)

    Zeng LC


    Full Text Available The purpose of this paper is to introduce the concept of fuzzy variational-like inequalities and to study the existence problem and the iterative approximation problem for solutions of certain kinds of fuzzy variational-like inequalities in Hilbert spaces. By using the general auxiliary principle technique, Ky Fan's KKM theorem, Nadler's fixed point theorem, and some new analytic techniques, some existence theorems and some iterative approximation schemes for solving this kind of fuzzy variational-like inequalities are established. The results presented in this paper are new and they generalize, improve, and unify a number of recent results.

  3. Radioisotope diagnostics in auxiliary liver transplantation in miniature swine

    Energy Technology Data Exchange (ETDEWEB)

    Buchali, K.; Nawroth, R.; Sydow, K.; Pahlig, H.; Wolff, H. (Humboldt-Universitaet, Berlin (German Democratic Republic). Bereich Medizin (Charite))


    Experiences in the blood flow measurement (/sup 133/Xe washing out) and function test (/sup 133/I-bromosulfophthalein, /sup 99m/Tc-IDA) in auxiliary liver transplantation in miniature swine are reported. Normal values for global blood flow (70 (35-144) ml/100 g x min) and the bromosulfophthalein half-time (6.5 +- 2.4 min) were defined preoperatively. Selective blood flow measurements were carried out invasively after transplantation. Only insufficient experience was obtained in scintiscanning of liver and biliary ducts because of graft insufficiency.

  4. Comment: ``On the computation of molecular auxiliary functions and ”

    Indian Academy of Sciences (India)

    Frank E Harris


    Guseinov, Mamedov, Kara and Orbay (Pramana – J. Phys. 56, 691 (2001)) propose methods for evaluating the molecular auxiliary functions () and () for the range 17 ≤ ≤ 60 and 25 ≤ ≤ 60. However, their procedure for () is not new, and that for () is less efficient for their target range than another well-known method. Their approach does have merit for smaller non-zero values of . Two minor errors in table 1 of their paper are also identified.

  5. Auxiliary-field-based trial wave functions in quantum Monte Carlo calculations (United States)

    Chang, Chia-Chen; Rubenstein, Brenda M.; Morales, Miguel A.


    Quantum Monte Carlo (QMC) algorithms have long relied on Jastrow factors to incorporate dynamic correlation into trial wave functions. While Jastrow-type wave functions have been widely employed in real-space algorithms, they have seen limited use in second-quantized QMC methods, particularly in projection methods that involve a stochastic evolution of the wave function in imaginary time. Here we propose a scheme for generating Jastrow-type correlated trial wave functions for auxiliary-field QMC methods. The method is based on decoupling the two-body Jastrow into one-body projectors coupled to auxiliary fields, which then operate on a single determinant to produce a multideterminant trial wave function. We demonstrate that intelligent sampling of the most significant determinants in this expansion can produce compact trial wave functions that reduce errors in the calculated energies. Our technique may be readily generalized to accommodate a wide range of two-body Jastrow factors and applied to a variety of model and chemical systems.

  6. An experimental analysis of auxiliary and copula verb generalization in aphasia. (United States)

    Kearns, K P; Salmon, S J


    Two subjects with chronic Broca's aphasia were taught to produce third person singular auxiliary is in sentence contexts to determine if is production would generalize to untrained auxiliary is items and to copula is contexts. A single subject (ABAB) reversal design was employed. Results revealed that training a few exemplars of the present tense auxiliary is resulted in generalized responding to untrained auxiliary is and copula is plus predicate adjective items. Generalized responding to untrained copula is plus predicate nominative and locative items was marked by individual variability. Although auxiliary and copula is verb production was maintained on 2- and 6-week follow-up probes, transfer to spontaneous speech was negligible. The results were interpreted as providing partial support for the existence of a functional or generative response class between verbal auxiliary and the copula is verbs.

  7. A note on the auxiliary equation method for solving nonlinear partial differential equations

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chunping [Institute of Mathematics, Yangzhou University, Yangzhou 225002 (China)]. E-mail:; Liu, Xiaoping [Gaoyou Branch, Yangzhou Education College, Gaoyou 225600 (China)


    First, we pick up some solutions of an auxiliary ordinary differential equation, which were neglected by Sirendaoreji and Sun Jiong in the auxiliary equation method. Then, we give the classification of the solutions for the auxiliary ordinary differential equation depending on its three parameters. Finally, we consider the (2+1)-dimensional dispersive long wave equations and get its more exact solitary wave solutions and reveal the relation of the exact solitary wave solutions obtained by Sirendaoreji and Sun Jiong in their paper.

  8. 基于MFAC的快速路主辅路的均衡控制%MFAC based balance control for freeway and auxiliary road

    Institute of Scientific and Technical Information of China (English)

    程志辉; 金尚泰


    In order to solve the question of trafifc congestion and trafifc resources wasting caused by the density difference between freeway and auxiliary road, the method of balance control for freeway and auxiliary road based on MFAC was proposed. This method introduced the difference balanced control theory and was not restricted by the entrance ramp and auxiliary road intersection model. Only depending on the ramp and intersection trafifc lfow rates as input data and the density of freeway and auxiliary road sections as output data, this method could achieve the model-free adaptive control on strong nonlinear freeway and auxiliary road system, reach to density equilibrium on freeway and auxiliary road system. The simulation results on the Matlab platform showed the effectiveness of the method.%为了解决快速路主辅路交通密度不均衡造成的局部道路拥挤和资源浪费现象,本文提出了基于无模型自适应控制的快速路主辅路均衡控制方法,该方法中引入了均衡控制思想中的差值控制方法,该方法不受入口匝道和辅路交叉口的模型限制,利用入口匝道流率与交叉口离驶率输入数据和主辅路路段密度输出数据,即可实现强非线性快速路主辅路系统的无模型自适应控制,使主辅路达到系统级的密度均衡。Matlab平台上的仿真比较结果表明了这种控制方法的有效性。

  9. A Convergent Method of Auxiliary Sources for Two-Dimensional Impedance Scatterers With Edges

    DEFF Research Database (Denmark)

    Karamehmedovic, Mirza; Breinbjerg, Olav


    A modification to the Method of Auxiliary Sources (MAS) is introduced which renders the method operational for two-dimensional impedance scatterers with edges. The modification consists in letting the auxiliary surface converge to the scatterer physical surface for increasing number of auxiliary...... sources, whereby MAS approaches a surface integral equation (IE) method. Hereby, a systematic procedure for selecting the number and locations of the auxiliary sources is provided, and convergence of numerical results is obtained. The new method resulting from this modification thus combines the desirable...

  10. Environmental impact assessment of the incineration of municipal solid waste with auxiliary coal in China

    DEFF Research Database (Denmark)

    Zhao, Yan; Xing, Wei; Lu, Wenjing


    The environmental impacts of waste incineration with auxiliary coal were investigated using the life-cycle-based software, EASEWASTE, based on the municipal solid waste (MSW) management system in Shuozhou City. In the current system, MSW is collected, transported, and incinerated with 250kg of coal...... per ton of waste. Based on observed environmental impacts of incineration, fossil CO2 and heavy metals were primary contributors to global warming and ecotoxicity in soil, respectively. Compared with incinerators using excess coal, incineration with adequate coal presents significant benefits......-separated and landfilled, the incineration of rest-waste presents better results on global warming, acidification, nutrient enrichment, and even ecotoxicity in soil. This process is considered a promising solution for MSW management in Shuozhou City. Weighted normalized environmental impacts were assessed based on Chinese...

  11. Auxiliary Parameter MCMC for Exponential Random Graph Models (United States)

    Byshkin, Maksym; Stivala, Alex; Mira, Antonietta; Krause, Rolf; Robins, Garry; Lomi, Alessandro


    Exponential random graph models (ERGMs) are a well-established family of statistical models for analyzing social networks. Computational complexity has so far limited the appeal of ERGMs for the analysis of large social networks. Efficient computational methods are highly desirable in order to extend the empirical scope of ERGMs. In this paper we report results of a research project on the development of snowball sampling methods for ERGMs. We propose an auxiliary parameter Markov chain Monte Carlo (MCMC) algorithm for sampling from the relevant probability distributions. The method is designed to decrease the number of allowed network states without worsening the mixing of the Markov chains, and suggests a new approach for the developments of MCMC samplers for ERGMs. We demonstrate the method on both simulated and actual (empirical) network data and show that it reduces CPU time for parameter estimation by an order of magnitude compared to current MCMC methods.

  12. Undersampled face recognition via robust auxiliary dictionary learning. (United States)

    Wei, Chia-Po; Wang, Yu-Chiang Frank


    In this paper, we address the problem of robust face recognition with undersampled training data. Given only one or few training images available per subject, we present a novel recognition approach, which not only handles test images with large intraclass variations such as illumination and expression. The proposed method is also to handle the corrupted ones due to occlusion or disguise, which is not present during training. This is achieved by the learning of a robust auxiliary dictionary from the subjects not of interest. Together with the undersampled training data, both intra and interclass variations can thus be successfully handled, while the unseen occlusions can be automatically disregarded for improved recognition. Our experiments on four face image datasets confirm the effectiveness and robustness of our approach, which is shown to outperform state-of-the-art sparse representation-based methods.

  13. Symbol rate identification for auxiliary amplitude modulation optical signal (United States)

    Wei, Junyu; Dong, Zhi; Huang, Zhiping; Zhang, Yimeng


    In this paper, we creatively propose and demonstrate a method for symbol rate identification (SRI) of auxiliary amplitude modulation (AAM) optical signal based on asynchronous delay-tap sampling (ADTS) and average magnitude difference function (AMDF). The method can accurately estimate symbol rate and has large transmission impairments tolerance. Furthermore, it can be realized in the digital signal processor (DSP) with low logical resources because of multiplication-free. In order to improve the accuracy of SRI, the peak to valley ratio (PTVR) of AMDF is introduced into our method for blind chromatic dispersion (CD) compensation. The results of the numerical simulations show that the overall maximum SRI error is smaller 0.079% for return-to-zero (RZ) on-off keying (OOK), RZ differential phase-shift keying (DPSK), RZ differential quadrature phase-shift keying (DQPSK) and RZ 16-ary quadrature amplitude modulation (QAM) with 50% duty cycles.

  14. A proposal on auxiliary business insurance for peritoneal dialysis treatment

    Institute of Scientific and Technical Information of China (English)

    WANG Juan; WANG Tao; FANG Ji-qian


    Background The peritoneal dialysis (PD) therapy for end stage renal disease (ESRD) is expensive. The main reason for non-acceptance onto dialysis programs is the great cost. In the present study, we design an auxiliary business insurance program to provide the potential ESRD patients who have no access to governmental medical insurance or can not afford the remaining part besides the limited reimbursement for peritoneal dialysis therapy.Methods The information applied in this study was extracted from the medical records of 641 PD patients, who were treated in two dialysis centers of the first and the third teaching hospitals of the Peking University respectively. A collective risk model was employed to estimate the expenses on PD therapy. Survival analyses were performed to obtain the average survival time of PD patients and the average length of time from the onset of the primary disease to the beginning of PD. An annuity method was used to determine the pure premium.Results For chronic nephritis, diabetes mellitus and hyperpietic as primary diseases, the mean survival time ± standard errors were (55.1±3.7) months, (38.9±3.2) months and (61.4±4.6) months respectively, and they were significantly different from each other (all P=0.000). The expenses of whole PD therapy were 242 159.05 Yuan, 182 525.02 Yuan and 284 579.24 Yuan respectively.Conclusions An auxiliary business insurance for PD patients was designed with the pure premium for any individual who had chronic nephritis, diabetes mellitus or hyperpietic as primary disease was RMB 35.94 Yuan/year, 87.73Yuan/year or 7.71 Yuan/year respectively without considering the additional premium for coping with the business expenditures and accidental risks.

  15. Auxiliary-field based trial wave functions in quantum Monte Carlo simulations (United States)

    Chang, Chia-Chen; Rubenstein, Brenda; Morales, Miguel

    We propose a simple scheme for generating correlated multi-determinant trial wave functions for quantum Monte Carlo algorithms. The method is based on the Hubbard-Stratonovich transformation which decouples a two-body Jastrow-type correlator into one-body projectors coupled to auxiliary fields. We apply the technique to generate stochastic representations of the Gutzwiller wave function, and present benchmark resuts for the ground state energy of the Hubbard model in one dimension. Extensions of the proposed scheme to chemical systems will also be discussed. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344, 15-ERD-013.

  16. Non-adiabatic elimination of auxiliary modes in continuous quantum measurements

    CERN Document Server

    Yang, Huan; Chen, Yanbei


    When measuring a complex quantum system, we are often interested in only a few degrees of freedom-the plant, while the rest of them are collected as auxiliary modes-the bath. The bath can have finite memory (non-Markovian), and simply ignoring its dynamics, i.e., adiabatically eliminating it, is inadequate to predict the true quantum behavior of the plant. We generalize the technique introduced by Strunz et. al. [Phys. Rev. Lett 82, 1801 (1999)], and develop a formalism that allows us to eliminate the bath non-adiabatically in continuous quantum measurements, and derive a non-Markovian stochastic master equation for the plant alone. We apply this formalism to two interesting examples in cavity QED: (i) a two-level atom (a qubit) coupled to a cavity and (ii) linear optomechanical interaction, both of which can be exactly solved.

  17. Auxiliary power unit based on a solid oxide fuel cell and fuelled with diesel (United States)

    Lawrence, Jeremy; Boltze, Matthias

    An auxiliary power unit (APU) is presented that is fuelled with diesel, thermally self-sustaining, and based on a solid oxide fuel cell (SOFC). The APU is rated at 1 kW electrical, and can generate electrical power after a 3 h warm-up phase. System features include a "dry" catalytic partial oxidation (CPOX) diesel reformer, a 30 cell SOFC stack with an open cathode, and a porous-media afterburner. The APU does not require a supply of external water. The SOFC stack is an outcome of a development partnership with H.C. Starck GmbH and Fraunhofer IKTS, and is discussed in detail in an accompanying paper.

  18. Internal resonance with commensurability induced by an auxiliary oscillator for broadband energy harvesting (United States)

    Xiong, Liuyang; Tang, Lihua; Mace, Brian R.


    An internal resonance based broadband vibration energy harvester is proposed by introducing an auxiliary oscillator to the main nonlinear harvesting oscillator. Compared to conventional nonlinear energy harvesters, the natural frequencies of this two-degree-of-freedom nonlinear system can be easily adjusted to be commensurable which will result in more resonant peaks and better wideband performance. Experimental measurements and equivalent circuit simulations demonstrate that this design outperforms its linear counterpart. In addition to the open-circuit voltage, the optimal resistance to obtain the maximum power is determined. Nearly 130% increase in the bandwidth is achieved compared to the linear counterpart at an excitation level of 2 m/s2. The findings provide insight for the design of a broadband energy harvester when there is nonlinearity and internal resonance.

  19. Modal Auxiliaries and Their Semantic Functions Used by Advanced EFL Learners (United States)

    Torabiardakani, Najmeh; Khojasteh, Laleh; Shokrpour, Nasrin


    Since modal auxiliary verbs have been proved to be one of the most troublesome grammatical structures in English, the researchers of this study decided to do an analysis on the ways in which advanced EFL Iranian students use modal auxiliaries focusing specially on nine modals' semantic functions. Consequently, was conducted based on the following…

  20. 46 CFR 52.01-35 - Auxiliary, donkey, fired thermal fluid heater, and heating boilers. (United States)


    ... 46 Shipping 2 2010-10-01 2010-10-01 false Auxiliary, donkey, fired thermal fluid heater, and... requirements for miscellaneous boiler types, such as donkey, fired thermal fluid heater, heating boiler, etc... (CONTINUED) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-35 Auxiliary, donkey, fired...

  1. Solid Oxide Fuel Cell/Gas Turbine Hybrid Cycle Technology for Auxiliary Aerospace Power (United States)

    Steffen, Christopher J., Jr.; Freeh, Joshua E.; Larosiliere, Louis M.


    A notional 440 kW auxiliary power unit has been developed for 300 passenger commercial transport aircraft in 2015AD. A hybrid engine using solid-oxide fuel cell stacks and a gas turbine bottoming cycle has been considered. Steady-state performance analysis during cruise operation has been presented. Trades between performance efficiency and system mass were conducted with system specific energy as the discriminator. Fuel cell performance was examined with an area specific resistance. The ratio of fuel cell versus turbine power was explored through variable fuel utilization. Area specific resistance, fuel utilization, and mission length had interacting effects upon system specific energy. During cruise operation, the simple cycle fuel cell/gas turbine hybrid was not able to outperform current turbine-driven generators for system specific energy, despite a significant improvement in system efficiency. This was due in part to the increased mass of the hybrid engine, and the increased water flow required for on-board fuel reformation. Two planar, anode-supported cell design concepts were considered. Designs that seek to minimize the metallic interconnect layer mass were seen to have a large effect upon the system mass estimates.

  2. Puerto Rico Experimental Model Dental Auxiliary Training Program. The Comprehensive Report, October 22, 1976-February 24, 1980. (United States)

    Puerto Rico Univ., San Juan. School of Dentistry.

    The Dental Auxiliary Department of the University of Puerto Rico designed a career option dental auxiliary training program which is a step ladder program with three exit points over a period of two academic years. The first option is a six-month track to train a traditional chairside dental auxiliary. The second option is a nine-month track to…

  3. Auxiliary transportation mode in a fully-mechanized face in a nearly horizontal thin coal seam

    Institute of Scientific and Technical Information of China (English)

    Wang Chen; Tu Shihao; Zhang Lei; Yang Qianlong; Tu Hongsheng


    On fully-mechanized faces in nearly horizontal thin coal seams (NHTCS), the selection of the auxiliary transportation mode is difficult. Generally, auxiliary transportation mainly includes trackless or rail transportation. Combined with a familiar NHTCS fully-mechanized face, a multi-attribute decision-making model was set up for the decision. The index weight was objectively determined with the fuzzy number and entropy method. The priority order of auxiliary transportation modes was obtained from the Preference Ranking Organization Method for Enrichment Evaluation (PROMETHEE). The results show that: the net flow of the mode can be expressed by the function of the surrounding rock deformation of the roadway, the dimension of equipment and the thickness of the coal seam;Based on the cost type index, there is a positive correlation between the net flow with the height and width of the trackless aux-iliary transportation equipment, respectively. The trackless auxiliary transportation equipment selection principle should be‘height first then width”. Combined with the field application of the trackless auxil-iary transportation in Liangshuijing coal mine, the proper method to achieve the safe and high-efficient exploitation of a NHTCS fully-mechanized face is trackless tyred vehicle auxiliary transportation.

  4. A magnetorheological clutch for efficient automotive auxiliary device actuation

    Directory of Open Access Journals (Sweden)

    F. Bucchi


    Full Text Available In this paper the results of a project funded by Regione Toscana aimed at reducing the power absorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of a magnetorheological clutch (MR is proposed, aimed at disengaging the vacuum pump, which draws in air from the power-brake booster chamber, in order to reduce the device power absorption. Several clutch preliminary studies done to choose the clutch geometry and the magnetic field supply are illustrated. The final choice consisted in an MR clutch with permanent magnet, which satisfied size, torque and fail-safe specifications. The clutch characteristics, in terms of torque versus slip, were obtained experimentally for three different clutch prototypes on an ad-hoc developed test bench.As result of a preliminary simulation, a comparison between the power absorption of a current production vacuum pump, an innovative vacuum pump and both vacuum pumps coupled with the MR clutch is presented. The New European Driving Cycle is considered for simulating the vacuum pump operation both in urban and highway driving. Results show that the use of the innovative vacuum pump reduces the device consumption of about 35%, whereas the use of MR clutch coupled with the innovative vacuum pump reduces it up to about 44% in urban driving and 50% in highway driving.

  5. Adaptive mean-shift tracking with auxiliary particles. (United States)

    Wang, Junqiu; Yagi, Yasushi


    We present a new approach for robust and efficient tracking by incorporating the efficiency of the mean-shift algorithm with the multihypothesis characteristics of particle filtering in an adaptive manner. The aim of the proposed algorithm is to cope with problems that were brought about by sudden motions and distractions. The mean-shift tracking algorithm is robust and effective when the representation of a target is sufficiently discriminative, the target does not jump beyond the bandwidth, and no serious distractions exist. We propose a novel two-stage motion estimation method that is efficient and reliable. If a sudden motion is detected by the motion estimator, some particle-filtering-based trackers can be used to outperform the mean-shift algorithm, at the expense of using a large particle set. In our approach, the mean-shift algorithm is used, as long as it provides reasonable performance. Auxiliary particles are introduced to cope with distractions and sudden motions when such threats are detected. Moreover, discriminative features are selected according to the separation of the foreground and background distributions when threats do not exist. This strategy is important, because it is dangerous to update the target model when the tracking is in an unsteady state. We demonstrate the performance of our approach by comparing it with other trackers in tracking several challenging image sequences.

  6. On the implementation of an auxiliary pantograph for speed increase on existing lines (United States)

    Liu, Zhendong; Jönsson, Per-Anders; Stichel, Sebastian; Rønnquist, Anders


    The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph-catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.

  7. A Cautious Note on Auxiliary Variables That Can Increase Bias in Missing Data Problems. (United States)

    Thoemmes, Felix; Rose, Norman


    The treatment of missing data in the social sciences has changed tremendously during the last decade. Modern missing data techniques such as multiple imputation and full-information maximum likelihood are used much more frequently. These methods assume that data are missing at random. One very common approach to increase the likelihood that missing at random is achieved consists of including many covariates as so-called auxiliary variables. These variables are either included based on data considerations or in an inclusive fashion; that is, taking all available auxiliary variables. In this article, we point out that there are some instances in which auxiliary variables exhibit the surprising property of increasing bias in missing data problems. In a series of focused simulation studies, we highlight some situations in which this type of biasing behavior can occur. We briefly discuss possible ways how one can avoid selecting bias-inducing covariates as auxiliary variables.

  8. Ocean Surface Topography Mission (OSTM) /Jason-2: Auxiliary Files (NODC Accession 0044983) (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This accession contains the data descriptions for the OSTM/Jason-2 Auxiliary data files, which is served through the NOAA/NESDIS Comprehensive Large Array-data...

  9. Ground test challenges in the development of the Space Shuttle orbiter auxiliary power unit (United States)

    Chaffee, N. H.; Lance, R. J.; Weary, D. P.


    A conventional aircraft hydraulic system design approach was selected to provide fluid power for the Space Shuttle Orbiter. Developing the power unit, known as the Auxiliary Power Unit (APU), to drive the hydraulic pumps presented a major technological challenge. A small, high speed turbine drive unit powered by catalytically decomposed hydrazine and operating in the pulse mode was selected to meet the requirement. Because of limitations of vendor test facilities, significant portions of the development, flight qualification, and postflight anomaly testing of the Orbiter APU were accomplished at the Johnson Space Center (JSC) test facilities. This paper discusses the unique requirements of attitude, gravity forces, pressure profiles, and thermal environments which had to be satisfied by the APU, and presents the unique test facility and simulation techniques employed to meet the ground test requirements. In particular, the development of the zero-g lubrication system, the development of necessary APU thermal control techniques, the accomplishment of integrated systems tests, and the postflight investigation of the APU lube oil cooler behavior are discussed.

  10. Preliminary safety analysis report for the Auxiliary Hot Cell Facility, Sandia National Laboratories, Albuquerque, New Mexico

    Energy Technology Data Exchange (ETDEWEB)



    The Auxiliary Hot Cell Facility (AHCF) at Sandia National Laboratories, New Mexico (SNL/NM) will be a Hazard Category 3 nuclear facility used to characterize, treat, and repackage radioactive and mixed material and waste for reuse, recycling, or ultimate disposal. A significant upgrade to a previous facility, the Temporary Hot Cell, will be implemented to perform this mission. The following major features will be added: a permanent shield wall; eight floor silos; new roof portals in the hot-cell roof; an upgraded ventilation system; and upgraded hot-cell jib crane; and video cameras to record operations and facilitate remote-handled operations. No safety-class systems, structures, and components will be present in the AHCF. There will be five safety-significant SSCs: hot cell structure, permanent shield wall, shield plugs, ventilation system, and HEPA filters. The type and quantity of radionuclides that could be located in the AHCF are defined primarily by SNL/NM's legacy materials, which include radioactive, transuranic, and mixed waste. The risk to the public or the environment presented by the AHCF is minor due to the inventory limitations of the Hazard Category 3 classification. Potential doses at the exclusion boundary are well below the evaluation guidelines of 25 rem. Potential for worker exposure is limited by the passive design features incorporated in the AHCF and by SNL's radiation protection program. There is no potential for exposure of the public to chemical hazards above the Emergency Response Protection Guidelines Level 2.

  11. Models of methane behaviour in auxiliary ventilation of underground coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Torano, Javier; Torno, Susana; Menendez, Mario; Gent, Malcolm; Velasco, Judith [Mining and Civil Works Research Groups, School of Mines, Oviedo University, Asturias (Spain)


    Studies have been conducted in a roadway excavated in a coalbed of a deep underground coal mine located in Northern Spain (Hullera Vasco Leonesa SA), by both airflow velocity and methane concentration measurements. Modelling of ventilation and methane behaviour of that roadway by Computational Fluid Dynamics (CFD), through software Ansys CFX 10.0, is presented. A good correlation was found between the experimental data and the results predicted by CFD. Then a comparison of the results obtained by conventional methods with the results obtained by CFD 4D modelling, for the auxiliary ventilation in a dead-end roadway, was made. Although conventional methods give satisfactory results when considering methane dilution, this research proves that there may be some roadway zones in which methane concentration is higher than regulation values. This is owing to the airflow and methane behaviour in the roadway with the presence of dead zones, and the fact that only a part of the airflow provided by the fan reaches the working face. CFD modelling allows us to know in which zones of the roadway it may be necessary to reinforce forcing ventilation by additional systems, such as a forcing system with exhaust overlap, jet fans, spray fan systems or compressed air injectors. (author)

  12. Auxiliary matrix formalism for interaction representation transformations, optimal control and spin relaxation theories


    Goodwin, David; Kuprov, Ilya


    Auxiliary matrix exponential method is used to derive simple and numerically efficient general expressions for the following, historically rather cumbersome, and hard to compute, theoretical methods: (1) average Hamiltonian theory following interaction representation transformations; (2) Bloch-Redfield-Wangsness theory of nuclear and electron relaxation; (3) gradient ascent pulse engineering version of quantum optimal control theory. In the context of spin dynamics, the auxiliary matrix expon...

  13. A Method of Auxiliary Sources Approach for Modelling the Impact of Ground Planes on Antenna

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav


    The Method of Auxiliary Sources (MAS) is employed to model the impact of finite ground planes on the radiation from antennas. Two different antenna test cases are shown and the calculated results agree well with reference measurements......The Method of Auxiliary Sources (MAS) is employed to model the impact of finite ground planes on the radiation from antennas. Two different antenna test cases are shown and the calculated results agree well with reference measurements...

  14. Improvement of stability of sinusoidally driven atmospheric pressure plasma jet using auxiliary bias voltage

    Directory of Open Access Journals (Sweden)

    Hyun-Jin Kim


    Full Text Available In this study, we have proposed the auxiliary bias pulse scheme to improve the stability of atmospheric pressure plasma jets driven by an AC sinusoidal waveform excitation source. The stability of discharges can be significantly improved by the compensation of irregular variation in memory voltage due to the effect of auxiliary bias pulse. From the parametric study, such as the width, voltage, and onset time of auxiliary bias pulse, it has been demonstrated that the auxiliary bias pulse plays a significant role in suppressing the irregular discharges caused by the irregular variation in memory voltage and stable discharge can be initiated with the termination of the auxiliary bias pulse. As a result of further investigating the effects of the auxiliary pulse scheme on the jet stability under various process conditions such as the distance between the jet head and the counter electrode, and carrier gas flow, the jet stability can be improved by adjusting the amplitude and number of the bias pulse depending on the variations in the process conditions.

  15. A review of high-temperature polymer electrolyte membrane fuel-cell (HT-PEMFC)-based auxiliary power units for diesel-powered road vehicles (United States)

    Liu, Yongfeng; Lehnert, Werner; Janßen, Holger; Samsun, Remzi Can; Stolten, Detlef


    This paper presents an extensive review of research on the development of auxiliary power units with enhanced reformate tolerance for high temperature polymer electrolyte membrane fuel cells (HT-PEMFCs). Developments in diesel reforming for fuel cells as auxiliary power units (APUs), single fuel cells and stacks and systems are outlined in detail and key findings are presented. Summaries of HT-PEMFC APU applications and start-up times for HT-PEMFC systems are then given. A summary of cooling HT-PEMFC stacks using a classic schematic diagram of a 24-cell HT-PEMFC stack, with a cooling plate for every third cell, is also presented as part of a stack analysis. Finally, a summary of CO tolerances for fuel cells is given, along with the effects of different CO volume fractions on polarization curves, the fraction of CO coverage, hydrogen coverage, anode overpotential and cell potential.

  16. Simulation of engine auxiliary drive V-belt slip motion. Part 1. Development of belt slip model; Engine hoki V belt slip kyodo no simulation. 1. Belt slip model no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kurisu, T. [Mazda Motor Corp., Hiroshima (Japan)


    V-belts are widely used for driving auxiliary components of an engine. Inadequet design of such belt system sometimes results in troubles such as belt squeak, side rubber separation and/or bottom rubber crack. However, there has been no design tools which can predict belt slip quantitatively. The author developed a motion simulation program of Auxiliary Drive V-Belt System considering belt slip. The program showed good prediction accuracy for belt slip motion. This paper describes the simulation model. 1 ref., 12 figs.

  17. Solid Oxide Fuel Cell Development for Auxiliary Power in Heavy Duty Vehicle Applications

    Energy Technology Data Exchange (ETDEWEB)

    Daniel T. Hennessy


    Changing economic and environmental needs of the trucking industry is driving the use of auxiliary power unit (APU) technology for over the road haul trucks. The trucking industry in the United States remains the key to the economy of the nation and one of the major changes affecting the trucking industry is the reduction of engine idling. Delphi Automotive Systems, LLC (Delphi) teamed with heavy-duty truck Original Equipment Manufacturers (OEMs) PACCAR Incorporated (PACCAR), and Volvo Trucks North America (VTNA) to define system level requirements and develop an SOFC based APU. The project defines system level requirements, and subsequently designs and implements an optimized system architecture using an SOFC APU to demonstrate and validate that the APU will meet system level goals. The primary focus is on APUs in the range of 3-5 kW for truck idling reduction. Fuels utilized were derived from low-sulfur diesel fuel. Key areas of study and development included sulfur remediation with reformer operation; stack sensitivity testing; testing of catalyst carbon plugging and combustion start plugging; system pre-combustion; and overall system and electrical integration. This development, once fully implemented and commercialized, has the potential to significantly reduce the fuel idling Class 7/8 trucks consume. In addition, the significant amounts of NOx, CO2 and PM that are produced under these engine idling conditions will be virtually eliminated, inclusive of the noise pollution. The environmental impact will be significant with the added benefit of fuel savings and payback for the vehicle operators / owners.

  18. Concerted action of NIC relaxase and auxiliary protein MobC in RA3 plasmid conjugation. (United States)

    Godziszewska, Jolanta; Moncalián, Gabriel; Cabezas, Matilde; Bartosik, Aneta A; de la Cruz, Fernando; Jagura-Burdzy, Grazyna


    Conjugative transfer of the broad-host-range RA3 plasmid, the archetype of the IncU group, relies on the relaxase NIC that belongs to the as yet uncharacterized MOBP4 subfamily. NIC contains the signature motifs of HUH relaxases involved in Tyr nucleophilic attack. However, it differs in the residue involved in His activation for cation coordination and was shown here to have altered divalent cation requirements. NIC is encoded in the mobC-nic operon preceded directly by oriT, where mobC encodes an auxiliary transfer protein with a dual function: autorepressor and stimulator of conjugative transfer. Here an interplay between MobC and NIC was demonstrated. MobC is required for efficient NIC cleavage of oriT in supercoiled DNA whereas NIC assists MobC in repression of the mobC-nic operon. A 7-bp arm of IR3 (IR3a) was identified as the binding site for NIC and the crucial nucleotides in IR3a for NIC recognition were defined. Fully active oriTRA3 was delineated to a 47-bp DNA segment encompassing a conserved cleavage site sequence, the NIC binding site IR3a and the MobC binding site OM . This highly efficient RA3 conjugative system with defined requirements for minimal oriT could find ample applications in biotechnology and computational biology where simple conjugative systems are needed.

  19. Regulatable and Modulable Background Expression Control in Prokaryotic Synthetic Circuits by Auxiliary Repressor Binding Sites. (United States)

    Merulla, Davide; van der Meer, Jan Roelof


    Expression control in synthetic genetic circuitry, for example, for construction of sensitive biosensors, is hampered by the lack of DNA parts that maintain ultralow background yet achieve high output upon signal integration by the cells. Here, we demonstrate how placement of auxiliary transcription factor binding sites within a regulatable promoter context can yield an important gain in signal-to-noise output ratios from prokaryotic biosensor circuits. As a proof of principle, we use the arsenite-responsive ArsR repressor protein from Escherichia coli and its cognate operator. Additional ArsR operators placed downstream of its target promoter can act as a transcription roadblock in a distance-dependent manner and reduce background expression of downstream-placed reporter genes. We show that the transcription roadblock functions both in cognate and heterologous promoter contexts. Secondary ArsR operators placed upstream of their promoter can also improve signal-to-noise output while maintaining effector dependency. Importantly, background control can be released through the addition of micromolar concentrations of arsenite. The ArsR-operator system thus provides a flexible system for additional gene expression control, which, given the extreme sensitivity to micrograms per liter effector concentrations, could be applicable in more general contexts.

  20. Cumulated UDC Supplement, 1965-1975. Volume I: Auxiliaries + Classes 0/3. Auxiliary Tables (0 Generalities, 1 Philosophy . Pyschology, 2 Religion . Theology, 3 Social Sciences). (United States)

    International Federation for Documentation, The Hague (Netherlands). Committee on Classification Research.

    In continuation of the "Cumulated UDC Supplement - 1964" published by the International Federation for Documentation, this document provides a cumulative supplement of the Universal Decimal Classification for 1965-1975. The first volume of a five volume series includes auxiliary tables and lists all the new classification subdivisions added to the…

  1. Auxiliary-field quantum Monte Carlo study of first- and second-row post-d elements

    CERN Document Server

    Al-Saidi, W A; Zhang, S; Krakauer, Henry; Zhang, Shiwei


    A series of calculations for the first- and second-row post-d elements (Ga-Br and In-I) are presented using the phaseless auxiliary-field quantum Monte Carlo (AF QMC) method. This method is formulated in a Hilbert space defined by any chosen one-particle basis, and maps the many-body problem into a linear combination of independent-particle solutions with external auxiliary fields. The phase/sign problem is handled approximately by the phaseless formalism using a trial wave function, which in our calculations was chosen to be the Hartree-Fock solution. We used the consistent correlated basis sets of Peterson and coworkers, which employ a small core relativistic pseudopotential. The AF QMC results are compared with experiment and with those from density-functional (GGA and B3LYP) and coupled-cluster CCSD(T) calculations. The AF QMC total energies agree with CCSD(T) to within a few milli-hartrees across the systems and over several basis sets. The calculated atomic electron affinities, ionization energies, and ...

  2. Preparation and photoluminescence enhancement in terbium(III ternary complexes with β-diketone and monodentate auxiliary ligands

    Directory of Open Access Journals (Sweden)

    Devender Singh


    Full Text Available A series of new solid ternary complexes of terbium(III ion based on β-diketone ligand acetylacetone (acac and monodentate auxiliary ligands (aqua/urea/triphenylphosphineoxide/pyridine-N-oxide had been prepared. The structural characterizations of synthesized ternary compounds were studied by means of elemental analysis, infrared (IR, and proton nuclear magnetic resonance (NMR spectral techniques. The optical characteristics were investigated with absorption as well as photoluminescence spectroscopy. Thermal behavior of compounds was examined by TGA/DTA analysis and all metal complexes were found to have good thermal stability. The luminescence decay time of complexes were also calculated by monitoring at emission wavelength corresponding to 5D4 → 7F5 transition. A comparative inspection of the luminescent behavior of prepared ternary compounds was performed in order to determine the function of auxiliary ligands in the enhancement of luminescence intensity produced by central terbium(III ion. The color coordinates values suggested that compounds showed bright green emission in visible region in electromagnetic spectrum. Complexes producing green light could play a significant role in the fabrication of efficient light conversion molecular devices for display purposes and lightning systems.

  3. Efficient Two-Dimensional Direction Finding via Auxiliary-Variable Manifold Separation Technique for Arbitrary Array Structure

    Directory of Open Access Journals (Sweden)

    Guang Hua


    Full Text Available A polynomial rooting direction of arrival (DOA algorithm for multiple plane waves incident on an arbitrary array structure that combines the multipolynomial resultants and matrix computations is proposed in this paper. Firstly, a new auxiliary-variable manifold separation technique (AV-MST is used to model the steering vector of arbitrary array structure as the product of a sampling matrix (dependent only on the array structure and two Vandermonde-structured wavefield coefficient vectors (dependent on the wavefield. Then the propagator operator is calculated and used to form a system of bivariate polynomial equations. Finally, the automatically paired azimuth and elevation estimates are derived by polynomial rooting. The presented algorithm employs the concept of auxiliary-variable manifold separation technique which requires no sector by sector array interpolation and thus does not suffer from any mapping errors. In addition, the new algorithm does not need any eigenvalue decomposition of the covariance matrix and exhausted search over the two-dimensional parameter space. Moreover, the algorithm gives automatically paired estimates, thus avoiding the complex pairing procedure. Therefore, the proposed algorithm shows low computational complexity and high robustness performance. Simulation results are shown to validate the effectiveness of the proposed method.

  4. Fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Y.; Wang, W. X.; LeBlanc, B. P.; Guttenfelder, W.; Kaye, S. M.; Ethier, S.; Mazzucato, E.; Bell, R. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543 (United States); Lee, K. C. [National Fusion Research Institute, Daejeon 305-806 (Korea, Republic of); Domier, C. W. [University of California at Davis, Davis, California 95616 (United States); Smith, D. R. [University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Yuh, H. [Nova Photonics, Inc., Princeton, New Jersey 08540 (United States)


    In this letter, we report the first observation of the fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus eXperiment [Ono et al., Nucl. Fusion 40, 557 (2000)]. The observation was made in a set of RF-heated L-mode plasmas with toroidal magnetic field of 0.55 T and plasma current of 300 kA. It is observed that electron-scale turbulence spectral power (measured with a high-k collective microwave scattering system) decreases significantly following fast cessation of RF heating that occurs in less than 200 μs. The large drop in the turbulence spectral power has a short time delay of about 1–2 ms relative to the RF cessation and happens on a time scale of 0.5–1 ms, much smaller than the energy confinement time of about 10 ms. Power balance analysis shows a factor of about 2 decrease in electron thermal diffusivity after the sudden drop of turbulence spectral power. Measured small changes in equilibrium profiles across the RF cessation are unlikely able to explain this sudden reduction in the measured turbulence and decrease in electron thermal transport, supported by local linear stability analysis and both local and global nonlinear gyrokinetic simulations. The observations imply that nonlocal flux-driven mechanism may be important for the observed turbulence and electron thermal transport.

  5. An inverse-model approach to multivariable norm optimal iterative learning control with auxiliary optimisation (United States)

    Owens, David H.; Freeman, Chris T.; Chu, Bing


    Motivated by the commonly encountered problem in which tracking is only required at selected intermediate points within the time interval, a general optimisation-based iterative learning control (ILC) algorithm is derived that ensures convergence of tracking errors to zero whilst simultaneously minimising a specified quadratic objective function of the input signals and chosen auxiliary (state) variables. In practice, the proposed solutions enable a repeated tracking task to be accurately completed whilst simultaneously reducing undesirable effects such as payload spillage, vibration tendencies and actuator wear. The theory is developed using the well-known norm optimal ILC (NOILC) framework, using general linear, functional operators between real Hilbert spaces. Solutions are derived using feedforward action, convergence is proved and robustness bounds are presented using both norm bounds and positivity conditions. Algorithms are specified for both continuous and discrete-time state-space representations, with the latter including application to multi-rate sampled systems. Experimental results using a robotic manipulator confirm the practical utility of the algorithms and the closeness with which observed results match theoretical predictions.

  6. Characterization of an aerosol sample from the auxiliary building of the Three Mile Island reactor. (United States)

    Kanapilly, G M; Stanley, J A; Newton, G J; Wong, B A; DeNee, P B


    Analyses for radioisotopic composition and dissolution characteristics were performed on an aerosol filter sample collected for a week by an air sampler located in the auxiliary building of the Three Mile Island nuclear reactor. The major radioisotopes found on the filter were 89Sr, 90Sr, 134Cs and 137Cs. Greater than 90% of both 89-90Sr and 134-137Cs dissolved within 48 hr in an in vitro test system. Scanning electron microscopic analyses showed the presence of respirable size particles as well as larger particles ranging up to 10 micron in diameter. The major matrix components were Fe, Ca, S, Mg, Al and Si. Although the radionuclides were present in a heterogeneous matrix, they were in a soluble form. This information enables a better evaluation of bioassay data and predictions of dose distribution resulting from an inhalation exposure to this aerosol. Further, the combination of techniques used in this study may be applicable to the characterization of other aerosols of unknown composition.

  7. Auxiliary power unit noise of Boeing B737 and B747 aircraft (United States)

    Kwan, Jimmy S. W.; Yang, S. J. Eric

    Most modern civil aircraft have an Auxiliary Power Unit (APU) which provides compressed air for engine starting and the air-conditioning system on ground and electrical power for aircraft use both on-ground and in-fligth. It is basically a gas turbine engine and it consists of a compressor section, a turbine section, and an accessory drive section. For Boeing B737 and B747 aircraft, the APU is located inside a compartment in the tail section of the aircraft and is completely enclosed by a sound-reduction fire-proof titanium shroud. APU noise is one of the major noise sources at many airports and is extremely important for a densely populated city such as Hong Kong. The noise from APU can affect many people, including ground crew aircraft maintenance staff, and people living in the vicinity of the airport. However, there is very little information available in the literature about APU noise. This paper describes the noise measurement method and presents the measurement results for APUs of one B747 and two B737 aircraft under both 'loaded' and 'no-load' conditions.

  8. Development and implementation of thermal signature testing protocol of auxiliary power unit (APU) and diesel tractor (United States)

    Jenkins, Chelsea L.; Bourne, Stefanie M.; Rowley, Matthew J.; Miles, Jonathan J.


    Thermal signature may be one of the defining factors in determining the applicability of fuel cell auxiliary power unit (APU) technology in military applications. Thermal characterization is important for military applications given that identification and detection may be accomplished through observation of its thermal signature. The operating modes and power takeoff operations of a vehicle will likely determine the thermal profile. The objective of our study was to develop and implement a protocol for quantifying the thermal characteristics of a methanol fuel cell and an idling tractor engine under representative characteristic operations. APU thermal characteristics are a special case for which standardized testing procedures do not presently exist. A customized testing protocol was developed and applied that is specific to an APU-equipped vehicle. Initial testing was conducted on the methanol APU-equipped Freightliner tractor using a high-performance radiometric infrared system. The APU profile calls for a series of infrared images to be collected at three different viewing angles and two different elevations under various loads. The diesel engine was studied in a similar fashion using seven different viewing angles and two different elevations. Raw data collected according to the newly developed methodology provided the opportunity for computer analysis and thermal profiling of both the fuel cell and the diesel engine.

  9. Widefield fluorescence imaging as an auxiliary tool to select the biopsy site for actinic cheilitis diagnosis (United States)

    Kurachi, C.; Cosci, A.; Takahama, A.; Fontes, K. B. F. C.; Azevedo, R. S.


    Actinic cheilitis (AC) is considered a potentially malignant disorder that mainly affects the lower lip, and it is caused by prolonged sun exposure. Clinical diagnosis relies on visual inspection by a trained clinician, when suspected of dysplasia changes, a biopsy is required. The heteregenous characteristics of the AC, makes the choice of the biopsy site a difficult task. Fluorescence detection has been presented as a useful tool to to detect biochemical and morphological tissue features related to cancer diagnosis, but still its effectiveness to discriminate premalignant lesion is not completely defined. In this clinical study, 57 AC patients were investigated using widefield fluorescence imaging (WFI) to evaluate the efficacy of this technique as an auxiliary tool to biopsy site location. A handheld fluorescence system based on 400-450 nm LED illumination Distinct trained clinicians evaluate the patient either with the conventional examination or the WFI, and were blinded to the other evaluation. A biopsy site was chosen based on the clinical examination, and another site was chosen using the fluorescence visualization. A total of 114 punch biopsies were performed, and 93% of the tissue samples presented epithelial dysplasia. The majority of the sites that presented moderate or severe dysplasia were sites chosen by WFI, showing its efficiency to improve the diagnosis of AC.

  10. The modeling of a standalone solid-oxide fuel cell auxiliary power unit (United States)

    Lu, N.; Li, Q.; Sun, X.; Khaleel, M. A.

    In this research, a Simulink model of a standalone vehicular solid-oxide fuel cell (SOFC) auxiliary power unit (APU) is developed. The SOFC APU model consists of three major components: a controller model; a power electronics system model; and an SOFC plant model, including an SOFC stack module, two heat exchanger modules, and a combustor module. This paper discusses the development of the nonlinear dynamic models for the SOFC stacks, the heat exchangers and the combustors. When coupling with a controller model and a power electronic circuit model, the developed SOFC plant model is able to model the thermal dynamics and the electrochemical dynamics inside the SOFC APU components, as well as the transient responses to the electric loading changes. It has been shown that having such a model for the SOFC APU will help design engineers to adjust design parameters to optimize the performance. The modeling results of the SOFC APU heat-up stage and the output voltage response to a sudden load change are presented in this paper. The fuel flow regulation based on fuel utilization is also briefly discussed.

  11. Environmental practices of the auxiliary companies to the Spanish automobile industry (United States)

    González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.


    The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

  12. Classifications of central solar domestic hot water systems (United States)

    Guo, J. Y.; Hao, B.; Peng, C.; Wang, S. S.


    Currently, there are many means by which to classify solar domestic hot water systems, which are often categorized according to their scope of supply, solar collector positions, and type of heat storage tank. However, the lack of systematic and scientific classification as well as the general disregard of the thermal performance of the auxiliary heat source is important to DHW systems. Thus, the primary focus of this paper is to determine a classification system for solar domestic hot water systems based on the positions of the solar collector and auxiliary heating device, both respectively and in combination. Field-testing data regarding many central solar DHW systems demonstrates that the position of the auxiliary heat source clearly reflects the operational energy consumption. The consumption of collective auxiliary heating hot water system is much higher than individual auxiliary heating hot water system. In addition, costs are significantly reduced by the separation of the heat storage tank and the auxiliary heating device.

  13. Comparison of collective Thomson scattering signals due to fast ions in ITER scenarios with fusion and auxiliary heating

    DEFF Research Database (Denmark)

    Salewski, Mirko; Asunta, O.; Eriksson, L.-G.;


    to the alpha population in these frequency ranges. The exceptions are limited regions in space with some non-negligible signal due to beam ions or fast He-3 which give rise to about 30% and 10-20% of the CTS signal, respectively. In turn, the dominance of the alpha contribution implies that the effects...... scattering (CTS) signal for the proposed CTS diagnostic in ITER. It is of interest to determine the contributions of these fast ion populations to the CTS signal for large Doppler shifts of the scattered radiation since conclusions can mostly be drawn for the dominant contributor. In this study, distribution...... functions of fast ions generated by NBI and ICRH are calculated for a steady-state ITER burning plasma equilibrium with the ASCOT and PION codes, respectively. The parameters for the auxiliary heating systems correspond to the design currently foreseen for ITER. The geometry of the CTS system for ITER...

  14. Color modeling of stratified pictorial layers using the radiative transfer equation solved by the auxiliary function method. (United States)

    Latour, G; Elias, M; Frigerio, J M


    The diffuse reflectance spectra and the trichromatic coordinates of diffusing stratified paints are modeled. Each layer contains its own pigments, and their optical properties are first determined from experiments. The radiative transfer equation is then solved by the auxiliary function method for modeling the total light scattered by the stratified systems. The results are in good agreement with experimental spectra and validate the modeling. The calculations are then applied on the same stratified systems to study the influence of the observation angle in a bidirectional configuration and to study the influence of the thickness of the layers in a given configuration. In both cases, the reflectance spectra and the trichromatic coordinates are calculated and compared.

  15. Engineering aspects and hardware verification of a volume producable solid oxide fuel cell stack design for diesel auxiliary power units (United States)

    Stelter, Michael; Reinert, Andreas; Mai, Björn Erik; Kuznecov, Mihail

    A solid oxide fuel cell (SOFC) stack module is presented that is designed for operation on diesel reformate in an auxiliary power unit (APU). The stack was designed using a top-down approach, based on a specification of an APU system that is installed on board of vehicles. The stack design is planar, modular and scalable with stamped sheet metal interconnectors. It features thin membrane electrode assemblies (MEAs), such as electrolyte supported cells (ESC) and operates at elevated temperatures around 800 °C. The stack has a low pressure drop in both the anode and the cathode to facilitate a simple system layout. An overview of the technical targets met so far is given. A stack power density of 0.2 kW l -1 has been demonstrated in a fully integrated, thermally self-sustaining APU prototype running with diesel and without an external water supply.

  16. Treatment for chronic daily headache by using auxiliary and alternative methods

    Directory of Open Access Journals (Sweden)

    V. A. Golovacheva


    Full Text Available Chronic daily headache (CDH is one of the top 10 causes of adult disability and one of the 5 most common causes of female disability. To treat patients with CDH is one of the most difficult tasks in neurological practice. Difficulties in managing patients with CHD are associated with the high prevalence of comorbid mental disorders, analgesic abuse, pain syndromes at another site, and misconceptions of a patient about his/her disease. A combination of drug and non-drug therapies is the mainstay of the current approach to treating patients with CDH. Standard, alternative, and auxiliary therapies are identified. The paper describes different types of current auxiliary and alternative therapy used in the world’s leading headache centers and clinics. It describes experience with cerebrolysin used as auxiliary and alternative pharmacotherapies for CDH.

  17. Research of auxiliary supporting means in swimming training of adults, which are afraid of water

    Directory of Open Access Journals (Sweden)

    Liliya Sheyko


    Full Text Available Purpose: to consider the possibility of effective teaching swimming adults suffering from hydrophobia, using auxiliary equipment. Materials and Methods: the study involved 37 people aged 22–45 years. Applied: analysis of the educational process of learning to swim, questioning, peer review techniques, teacher observation and experiment, mathematical statistics. Results: this study suggests that the formation of swimming skills is faster and more effective when used the auxiliary equipment. In the experimental group, four swimming styles were mastered by 59% and in the control by 18%. Conclusions: the proposed method of training of adults, with auxiliary equipment, allows to overcome the feelings of fear, accelerates the learning process and improve its efficiency.

  18. MAP estimation for hyperspectral image resolution enhancement using an auxiliary sensor. (United States)

    Hardie, Russell C; Eismann, Michael T; Wilson, Gregory L


    This paper presents a novel maximum a posteriori estimator for enhancing the spatial resolution of an image using co-registered high spatial-resolution imagery from an auxiliary sensor. Here, we focus on the use of high-resolution panchomatic data to enhance hyperspectral imagery. However, the estimation framework developed allows for any number of spectral bands in the primary and auxiliary image. The proposed technique is suitable for applications where some correlation, either localized or global, exists between the auxiliary image and the image being enhanced. To exploit localized correlations, a spatially varying statistical model, based on vector quantization, is used. Another important aspect of the proposed algorithm is that it allows for the use of an accurate observation model relating the "true" scene with the low-resolutions observations. Experimental results with hyperspectral data derived from the airborne visible-infrared imaging spectrometer are presented to demonstrate the efficacy of the proposed estimator.

  19. Auxiliary field Monte-Carlo study of the QCD phase diagram at strong coupling

    CERN Document Server

    Ohnishi, Akira; Nakano, Takashi Z


    We investigate the QCD phase diagram in the strong coupling limit by using a newly developed auxiliary field Monte-Carlo (AFMC) method. Starting from an effective action in the leading order of the 1/g^2 and 1/d expansion with one species of unrooted staggered fermion, we solve the many-body problem exactly by introducing the auxiliary fields and integrating out the temporal links and quark fields. We have a sign problem in AFMC, which is different from the original one in finite density lattice QCD. For low momentum auxiliary field modes, a complex phase cancellation mechanism exists, and the sign problem is not serious on a small lattice. Compared with the mean field results, the transition temperature is found to be reduced by around 10 % and the hadron phase is found to be extended in the larger chemical potential direction by around 20 %, as observed in the monomer-dimer-polymer (MDP) simulations.

  20. Calibration of Cholesky Auxiliary Basis Sets for Multiconfigurational Perturbation Theory Calculations of Excitation Energies. (United States)

    Boström, Jonas; Delcey, Mickaël G; Aquilante, Francesco; Serrano-Andrés, Luis; Pedersen, Thomas Bondo; Lindh, Roland


    The accuracy of auxiliary basis sets derived from Cholesky decomposition of two-electron integrals is assessed for excitation energies calculated at the state-average complete active space self-consistent field (CASSCF) and multiconfigurational second order perturbation theory (CASPT2) levels of theory using segmented as well as generally contracted atomic orbital basis sets. Based on 196 valence excitations in 26 organic molecules and 72 Rydberg excitations in 3 organic molecules, the results show that Cholesky auxiliary basis sets can be used without compromising the accuracy of the multiconfigurational methods. Specifically, with a decomposition threshold of 10(-4) au, the mean error due to the Cholesky auxiliary basis set is 0.001 eV, or smaller, decreasing with increasing atomic orbital basis set quality.

  1. 英语政治演讲中情态动词的人际意义研究%Interpersonal Meaning of Modal Auxiliaries in Political Speeches

    Institute of Scientific and Technical Information of China (English)



    Based on Halliday's interpersonal function of systemic-functional grammar, this paper is designed to investigate how interpersonal meaning is realized, by modal auxiliaries. The samples of Churchill's first three speeches delivered in World War II are taken in which the frequency of modal auxiliaries and the deep interpersonal meaning have been analyzed, and the relationship between the modal auxiliaries and the interpersonal meaning is demonstrated.%以韩礼德系统功能语法中的人际功能理论为基础,选用丘吉尔二战初期的三篇著名演讲稿为语料,采用量化和描述的研究方法,对情态动词在演讲语篇中出现的频率及其体现的人际意义进行分析、归纳,以说明情态动词与人际意义的实现之间的关系。

  2. Fourth derivative gravity in the auxiliary fields representation and application to the black hole stability

    CERN Document Server

    Mauro, Sebastiao; Fabbri, Alessandro; Shapiro, Ilya L


    We consider an auxiliary fields formulation for the general fourth-order gravity on an arbitrary curved background. The case of a Ricci-flat background is elaborated in full details and it is shown that there is an equivalence with the standard metric formulation. At the same time, using auxiliary fields helps to make perturbations to look simpler and the results more clear. As an application we reconsider the linear perturbations for the classical Schwarzschild solution. We also briefly discuss the relation to the effect of massive unphysical ghosts in the theory.

  3. Fourth derivative gravity in the auxiliary fields representation and application to the black-hole stability (United States)

    Mauro, Sebastião; Balbinot, Roberto; Fabbri, Alessandro; Shapiro, Ilya L.


    We consider an auxiliary fields formulation for the general fourth-order gravity on an arbitrary curved background. The case of a Ricci-flat background is elaborated in detail and it is shown that there is an equivalence with the standard metric formulation. At the same time, using auxiliary fields helps to make perturbations to look simpler and the results clearer. As an application we reconsider the linear perturbations for the classical Schwarzschild solution. We also briefly discuss the relation to the effect of massive unphysical ghosts in the theory.

  4. Auxiliary matrix formalism for interaction representation transformations, optimal control, and spin relaxation theories (United States)

    Goodwin, D. L.; Kuprov, Ilya


    Auxiliary matrix exponential method is used to derive simple and numerically efficient general expressions for the following, historically rather cumbersome, and hard to compute, theoretical methods: (1) average Hamiltonian theory following interaction representation transformations; (2) Bloch-Redfield-Wangsness theory of nuclear and electron relaxation; (3) gradient ascent pulse engineering version of quantum optimal control theory. In the context of spin dynamics, the auxiliary matrix exponential method is more efficient than methods based on matrix factorizations and also exhibits more favourable complexity scaling with the dimension of the Hamiltonian matrix.

  5. Implementation and Applications of the Method of Auxiliary Sources for Analysis of Smooth Scatterers and Wires

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal


    This report documents the implementation of Method of Auxiliary Sources techniques developed for smooth scatterers and wire scatterers. The work was done in the course of the PhD project "Electronically Steerable Antennas for Satellite Communication" where the techniques were employed to investig......This report documents the implementation of Method of Auxiliary Sources techniques developed for smooth scatterers and wire scatterers. The work was done in the course of the PhD project "Electronically Steerable Antennas for Satellite Communication" where the techniques were employed...

  6. Auxiliary matrix formalism for interaction representation transformations, optimal control, and spin relaxation theories

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, D. L.; Kuprov, Ilya, E-mail: [School of Chemistry, University of Southampton, Highfield Campus, Southampton SO17 1BJ (United Kingdom)


    Auxiliary matrix exponential method is used to derive simple and numerically efficient general expressions for the following, historically rather cumbersome, and hard to compute, theoretical methods: (1) average Hamiltonian theory following interaction representation transformations; (2) Bloch-Redfield-Wangsness theory of nuclear and electron relaxation; (3) gradient ascent pulse engineering version of quantum optimal control theory. In the context of spin dynamics, the auxiliary matrix exponential method is more efficient than methods based on matrix factorizations and also exhibits more favourable complexity scaling with the dimension of the Hamiltonian matrix.

  7. Method of Weave Design Using the Concept of Auxiliary Dobby Shaft

    Institute of Scientific and Technical Information of China (English)

    LU Jia-liang; XU Zheng


    The craft of auxiliary dobby shaft is one of methods used in the traditional figured woven textiles and especially brocade in China.Based on the principle of auxiliary dobby shaft,a new method of weave design was proposed.The relevant arrangement of warp and weave design were discussed.It is shown that this method can be applied on one electronic jacquard loom with single warp beam for new product development and production.And this effect will open up a new way to reproduce traditional fabrics in order to protect and develop Chinese traditional culture.

  8. Techno-economic analysis of fuel cell auxiliary power units as alternative to idling (United States)

    Jain, Semant; Chen, Hsieh-Yeh; Schwank, Johannes

    This paper presents a techno-economic analysis of fuel-cell-based auxiliary power units (APUs), with emphasis on applications in the trucking industry and the military. The APU system is intended to reduce the need for discretionary idling of diesel engines or gas turbines. The analysis considers the options for on-board fuel processing of diesel and compares the two leading fuel cell contenders for automotive APU applications: proton exchange membrane fuel cell and solid oxide fuel cell. As options for on-board diesel reforming, partial oxidation and auto-thermal reforming are considered. Finally, using estimated and projected efficiency data, fuel consumption patterns, capital investment, and operating costs of fuel-cell APUs, an economic evaluation of diesel-based APUs is presented, with emphasis on break-even periods as a function of fuel cost, investment cost, idling time, and idling efficiency. The analysis shows that within the range of parameters studied, there are many conditions where deployment of an SOFC-based APU is economically viable. Our analysis indicates that at an APU system cost of 100 kW -1, the economic break-even period is within 1 year for almost the entire range of conditions. At 500 kW -1 investment cost, a 2-year break-even period is possible except for the lowest end of the fuel consumption range considered. However, if the APU investment cost is 3000 kW -1, break-even would only be possible at the highest fuel consumption scenarios. For Abram tanks, even at typical land delivered fuel costs, a 2-year break-even period is possible for APU investment costs as high as 1100 kW -1.

  9. Lubrication System with Tolerance for Reduced Gravity (United States)

    Portlock, Lawrence E. (Inventor); McCune, Michael E. (Inventor); Dobek, Louis J. (Inventor)


    A lubrication system includes an auxiliary lubricant tank 48, a supply conduit 58 extending from a source of lubricant 26 to the auxiliary lubricant tank. A reduced-G bypass line 108 branches from the conduit and enters the auxiliary tank at a first elevation E.sub.1. The system also includes an auxiliary tank discharge conduit 116, a portion of which resides within the tank. The resident portion has an opening 122 at least partially at a second elevation E.sub.2 higher than the first elevation.

  10. Auxiliary energy in building technical services - Potential for savings and ways toward implementation; Hilfsenergie Haustechnik: Einspar-Potenziale und Umsetzungspfade

    Energy Technology Data Exchange (ETDEWEB)

    Nipkow, J. [Schweizerische Agentur fuer Energieeffizienz (SAFE), Zuerich (Switzerland); Peters, M.; Wapf, B. [Econcept AG, Zuerich (Switzerland)


    This report for the Swiss Federal Office of Energy (SFOE) examines the potential available for saving energy in the building technical services area. Savings of six to eight percent are noted for the area concerning pumps, fans, control systems, etc. The report presents the aims of the project and reviews the definition of auxiliary energy. National and international energy labels, limiting values and typical values for efficiency are examined. The results of surveys are presented and discussed as are the opinions and suggestions of planners, installers and architects. Manufacturers' opinions and marketing aspects are briefly examined, as are energy labels and regulations. Implementation of measures in various areas are described. Economical aspects and actions to be taken are discussed and educational measures are looked at. Follow-up projects are defined.

  11. Verb Placement in Second Language Acquisition: Experimental Evidence for the Different Behavior of Auxiliary and Lexical Verbs (United States)

    Verhagen, Josje


    This study investigates the acquisition of verb placement by Moroccan and Turkish second language (L2) learners of Dutch. Elicited production data corroborate earlier findings from L2 German that learners who do not produce auxiliaries do not raise lexical verbs over negation, whereas learners who produce auxiliaries do. Data from elicited…

  12. N-Linked Glycosyl Auxiliary-Mediated Native Chemical Ligation on Aspartic Acid: Application towards N-Glycopeptide Synthesis. (United States)

    Chai, Hua; Le Mai Hoang, Kim; Vu, Minh Duy; Pasunooti, Kalyan; Liu, Chuan-Fa; Liu, Xue-Wei


    A practical approach towards N-glycopeptide synthesis using an auxiliary-mediated dual native chemical ligation (NCL) has been developed. The first NCL connects an N-linked glycosyl auxiliary to the thioester side chain of an N-terminal aspartate oligopeptide. This intermediate undergoes a second NCL with a C-terminal thioester oligopeptide. Mild cleavage provides the desired N-glycopeptide.

  13. Non-cross-linked polystyrene-supported 2-imidazolidinone chiral auxiliary: synthesis and application in asymmetric alkylation reactions (United States)

    Nguyen, Quynh Pham Bao


    Summary Asymmetric alkylation reactions using non-cross-linked polystyrene (NCPS)-supported 2-imidazolidinone chiral auxiliaries were successfully investigated with excellent diastereocontrol (>99% de). The recovery and the recycling of this soluble polymer-supported chiral auxiliary were achieved in order to produce highly optical pure carboxylic acids. PMID:24204423

  14. 75 FR 34347 - Airworthiness Directives; Honeywell International Inc. Auxiliary Power Unit Models GTCP36-150(R... (United States)


    ... International Inc. Auxiliary Power Unit Models GTCP36-150(R) and GTCP36-150(RR) AGENCY: Federal Aviation...) for Honeywell International Inc. auxiliary power unit (APU) models GTCP36- 150(R) and GTCP36-150(RR... proposed AD applies to Honeywell International Inc. APU models GTCP36-150(R) and GTCP36-150(RR)....

  15. [On teaching the chemistry of pharmaceutical auxiliary substances within the framework of pharmaceutical education in the Czech and Slovak Republics]. (United States)

    Jan, Subert


    The paper emphasizes the need of the introduction of the subject Chemistry of Pharmaceutical Auxiliaries into the Pharmacy study programme at more colleges in the Czech and Slovak Republics. It also introduces and discusses some topics for possible extension of the content of the courses of the subject (the presented examples are taken form the field of analytical chemistry of pharmaceutical auxiliaries).

  16. Installation package for a domestic solar heating and hot water system (United States)


    The installation of two prototype solar heating and hot water systems is described. The systems consists of the following subsystems: solar collector, storage, control, transport, and auxiliary energy.

  17. Exact solutions of some coupled nonlinear diffusion-reaction equations using auxiliary equation method

    Indian Academy of Sciences (India)

    Ranjit Kumar


    Travelling and solitary wave solutions of certain coupled nonlinear diffusion-reaction equations have been constructed using the auxiliary equation method. These equations arise in a variety of contexts not only in biological, chemical and physical sciences but also in ecological and social sciences.

  18. Equivalence Between Different Auxiliary Field Formulations of ${\\cal N}=1$ Supergravity Coupled to Matter

    CERN Document Server

    Aoki, Shuntaro


    We reconsider the relation between three supergravity formalisms with different sets of auxiliary fields, known as the old-, new-, and non-minimal supergravity. Although it has been known that the old minimal formulation is the broadest class, we find that, with an unphysical $U(1)$ gauge symmetry and a compensating superfield, all of them become completely equivalent.

  19. Distinct Structural Pathways Coordinate the Activation of AMPA Receptor-Auxiliary Subunit Complexes. (United States)

    Dawe, G Brent; Musgaard, Maria; Aurousseau, Mark R P; Nayeem, Naushaba; Green, Tim; Biggin, Philip C; Bowie, Derek


    Neurotransmitter-gated ion channels adopt different gating modes to fine-tune signaling at central synapses. At glutamatergic synapses, high and low activity of AMPA receptors (AMPARs) is observed when pore-forming subunits coassemble with or without auxiliary subunits, respectively. Whether a common structural pathway accounts for these different gating modes is unclear. Here, we identify two structural motifs that determine the time course of AMPAR channel activation. A network of electrostatic interactions at the apex of the AMPAR ligand-binding domain (LBD) is essential for gating by pore-forming subunits, whereas a conserved motif on the lower, D2 lobe of the LBD prolongs channel activity when auxiliary subunits are present. Accordingly, channel activity is almost entirely abolished by elimination of the electrostatic network but restored via auxiliary protein interactions at the D2 lobe. In summary, we propose that activation of native AMPAR complexes is coordinated by distinct structural pathways, favored by the association/dissociation of auxiliary subunits.

  20. Kindergarten Mathematics with "Pepe the Rabbit": How Kindergartners Use Auxiliary Means to Solve Problems (United States)

    Skoumpourdi, Chrysanthi


    The aim of this paper is to investigate the role that auxiliary means (manipulatives such as cubes and representations such as number line) play for kindergartners in working out mathematical tasks. Our assumption was that manipulatives such as cubes would be used by kindergartners easily and successfully whereas the number line would be used by…

  1. Charge-constrained auxiliary-density-matrix methods for the Hartree–Fock exchange contribution

    DEFF Research Database (Denmark)

    Merlot, Patrick; Izsak, Robert; Borgoo, Alex;


    Three new variants of the auxiliary-density-matrix method (ADMM) of Guidon, Hutter, and VandeVondele [J. Chem. Theory Comput. 6, 2348 (2010)] are presented with the common feature thatthey have a simplified constraint compared with the full orthonormality requirement of the earlier ADMM1 method...

  2. 78 FR 72794 - Revisions to Auxiliary Installations, Replacement Facilities, and Siting and Maintenance Regulations (United States)


    ... facilities, costs, capacity, purpose, construction schedule, customers affected, effects on gas supply, rates....55(a) Auxiliary Facilities 12 1. Commission Jurisdiction 13 2. Section 2.55 Siting and Construction... natural gas company to have certificate authorization for the ``construction or extension of...

  3. Modelling the Impact of Ground Planes on Antenna Radiation Using the Method of Auxiliary Sources

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav


    The Method of Auxiliary Sources is employed to model the impact of finite ground planes on the radiation from antennas. In many cases the computational cost of available commercial tools restricts the simulations to include only a small ground plane or, by use of the image principle, the infinitely...

  4. New materials for auxiliary equipments manufacturing. Nuevos materiales para la construccion de bienes de equipo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Zayas, J. (Dto. Ingenieria Quimica y Metalurgia. Universidad de Barcelona (Spain))


    Some specific operational conditions at industrial chemical processes might oblige the conventional materials used for auxiliary equipments to be substituted by new materials like new steel alloys, non-ferrous metals, ceramics, composites, etc.. This article studies the characteristics, applications and types of new materials. (Author)


    Directory of Open Access Journals (Sweden)

    Tofan Dwi Hardjanto


    Full Text Available As a communicative strategy, hedging plays a central role in academic writing. Numerous different linguistic forms can be used to express this strategy. This article attempts to investigate modal auxiliary verbs as the principal means of expressing hedging in English academic discourse. For this purpose, a corpus of 75 primary empirical research articles from economics, linguistics, medicine, natural sciences and engineering was analyzed quantitatively with the help of corpus linguistic method. The results revealed that modal auxiliaries were used most frequently in linguistics and economics and least frequently in engineering and natural sciences while their use in medicine came in between. This seems to suggest that there is noticeable disciplinary variation in the degree of hedging through the use of modal auxiliaries in English research articles. Modal auxiliaries tend to be more common in soft sciences than in hard sciences whereas their use in health sciences in comparison with soft and hard sciences does not seem to show any significant difference.

  6. Application of the method of auxiliary sources in optical diffraction microscopy

    DEFF Research Database (Denmark)

    Karamehmedovic, Mirza; Sørensen, Mads Peter; Hansen, Poul-Erik


    The Method of Auxiliary Sources is used for characterisation of grating defects. Grating profiles are characterised by best fit matching of a library of diffraction efficiencies with numerical simulated diffraction efficiencies with defects. It is shown that the presented method can solve...

  7. Infections after auxiliary partial liver transplantation. Experiences in the first ten patients

    NARCIS (Netherlands)

    J.H. van Zeijl (J.); A.C.M. Kroes (Aloys C.M.); H.J. Metselaar (Herold); P.J.A. Willemse (P. J A); H.A. Bruining (Hajo); J.F. Sluiters (Hans); S.W. Schalm (Solko); O.T. Terpstra (Onno); M.F. Michel


    markdownabstractSummary In ten auxiliary partial liver transplant recipients selective bowel decontamination (SBD) was used to reduce infections due to gram-negative microorganisms and fungi. During SBD no gram-negative infections occurred. Candida peritonitis was observed in one patient. After di

  8. From Root Infinitive to Finite Sentence : The acquisition of verbal inflections and auxiliaries

    NARCIS (Netherlands)

    Blom, W.B.T.


    Across languages, children in the earliest stages of syntactic development tend to omit overt markings of finiteness, such as verbal inflections and auxiliaries: when children use a verb, they use an infinitival form (e.g. Dutch) or a bare stem (e.g. English). From Root Infinitive to Finite Sentence

  9. Auxiliares "avoir" and "etre" approche psychosystematique (The Auxiliaries "avoir" and "etre," a Psychosystematic Approach) (United States)

    Joly, Andre


    A brief psychosystematic analysis of the problem of auxiliaries in French, and of the solution offered by the internal psychomechanism of the language as found in Gustave Guillaume's research. "Avoir" and "etre"" are studied in some detail from several aspects. There is a short bibliography. (Text is in French.) (AMH)

  10. Financial record-keeping simulation in the dental auxiliary utilization clinic. (United States)

    Barron, E G; Waller, R R


    A financial record-keeping and billing simulation program which is part of the Dental Auxiliary Utilization (DAU) didactic and clinical experiences has been reported. Evaluation of student performance has demonstrated a satisfactory level of accomplishment. The students' performance may reflect their awareness regarding the importance of understanding the management of the financial affairs of a dental practice.

  11. 76 FR 65935 - National Poultry Improvement Plan and Auxiliary Provisions; Correction (United States)


    ... Animal and Plant Health Inspection Service 9 CFR Part 56 RIN 0579-AD21 National Poultry Improvement Plan... avian influenza to simplify the list of types of poultry eligible for 100 percent indemnity, among other... National Poultry Improvement Plan (the Plan) and its auxiliary provisions by providing new or...

  12. C1 compounds as auxiliary substrate for engineered Pseudomonas putida S12

    NARCIS (Netherlands)

    Koopman, F.W.; De Winde, J.H.; Ruijssenaars, H.J.


    The solvent-tolerant bacterium Pseudomonas putida S12 was engineered to efficiently utilize the C1 compounds methanol and formaldehyde as auxiliary substrate. The hps and phi genes of Bacillus brevis, encoding two key steps of the ribulose monophosphate (RuMP) pathway, were introduced to construct a

  13. 49 CFR 393.24 - Requirements for head lamps, auxiliary driving lamps and front fog lamps. (United States)


    ... Devices, and Electrical Wiring § 393.24 Requirements for head lamps, auxiliary driving lamps and front fog lamps. (a) Headlamps. Every bus, truck and truck tractor shall be equipped with headlamps as required by... specifications in FMVSS No. 108 (49 CFR 571.108), SAE J581, and SAE J583, respectively....

  14. Novel murine dendritic cell lines: a powerful auxiliary tool for dendritic cell research

    Directory of Open Access Journals (Sweden)

    Silvia A Fuertes Marraco


    Full Text Available Research in vitro facilitates discovery, screening and pilot experiments, often preceding research in vivo. Several technical difficulties render Dendritic Cell (DC research particularly challenging, including the low frequency of DC in vivo, thorough isolation requirements, and the vulnerability of DC ex vivo. Critically, there is not as yet a widely accepted human or murine DC line and in vitro systems of DC research are limited. In this study, we report the generation of new murine DC lines, named MutuDC, originating from cultures of splenic CD8α conventional DC (cDC tumors. By direct comparison to normal WT splenic cDC subsets, we describe the phenotypic and functional features of the MutuDC lines and show that they have retained all the major features of their natural counterpart in vivo, the splenic CD8α cDC. These features include expression of surface markers Clec9A, DEC205, and CD24, positive response to TLR3 and TLR9 but not TLR7 stimuli, secretion of cytokines and chemokines upon activation, as well as cross-presentation capacity. In addition to the close resemblance to normal splenic CD8α cDC, a major advantage is the ease of derivation and maintenance of the MutuDC lines, using standard culture medium and conditions, importantly without adding supplementary growth factors or maturation-inducing stimuli to the medium. Furthermore, genetically modified MutuDC lines have been successfully obtained either by lentiviral transduction or by culture of DC tumors originating from genetically modified mice.In view of the current lack of stable and functional DC lines, these novel murine DC lines have the potential to serve as an important auxiliary tool for DC research.

  15. Efficient calculation of nuclear spin-rotation constants from auxiliary density functional theory

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Gutierrez, Bernardo, E-mail: [Departamento de Ciencias Computacionales, Universidad de Guadalajara, Blvd. Marcelino García Barragán 1421, C.P. 44430 Guadalajara, Jalisco (Mexico); Camacho-Gonzalez, Monica [Universidad Tecnológica de Tecámac, División A2, Procesos Industriales, Carretera Federal México Pachuca Km 37.5, Col. Sierra Hermosa, C.P. 55740 Tecámac, Estado de México (Mexico); Bendana-Castillo, Alfonso [Universidad Tecnológica de Tecámac, División A3, Tecnologías de la Información y Comunicaciones, Carretera Federal México Pachuca Km 37.5, Col. Sierra Hermosa, C.P. 55740 Tecámac, Estado de México (Mexico); Simon-Bastida, Patricia [Universidad Tecnlógica de Tulancingo, División Electromecánica, Camino a Ahuehuetitla No. 301, Col. Las Presas, C.P. 43642 Tulancingo, Hidalgo (Mexico); Calaminici, Patrizia; Köster, Andreas M. [Departamento de Química, CINVESTAV, Avenida Instituto Politécnico Nacional 2508, A.P. 14-740, México D.F. 07000 (Mexico)


    The computation of the spin-rotation tensor within the framework of auxiliary density functional theory (ADFT) in combination with the gauge including atomic orbital (GIAO) scheme, to treat the gauge origin problem, is presented. For the spin-rotation tensor, the calculation of the magnetic shielding tensor represents the most demanding computational task. Employing the ADFT-GIAO methodology, the central processing unit time for the magnetic shielding tensor calculation can be dramatically reduced. In this work, the quality of spin-rotation constants obtained with the ADFT-GIAO methodology is compared with available experimental data as well as with other theoretical results at the Hartree-Fock and coupled-cluster level of theory. It is found that the agreement between the ADFT-GIAO results and the experiment is good and very similar to the ones obtained by the coupled-cluster single-doubles-perturbative triples-GIAO methodology. With the improved computational performance achieved, the computation of the spin-rotation tensors of large systems or along Born-Oppenheimer molecular dynamics trajectories becomes feasible in reasonable times. Three models of carbon fullerenes containing hundreds of atoms and thousands of basis functions are used for benchmarking the performance. Furthermore, a theoretical study of temperature effects on the structure and spin-rotation tensor of the H{sup 12}C–{sup 12}CH–DF complex is presented. Here, the temperature dependency of the spin-rotation tensor of the fluorine nucleus can be used to identify experimentally the so far unknown bent isomer of this complex. To the best of our knowledge this is the first time that temperature effects on the spin-rotation tensor are investigated.

  16. Adaptive cancellation of Es layer interference using auxiliary horizontal antennas

    Institute of Scientific and Technical Information of China (English)

    Zhao Long; Zhang Ning


    Based on a dual-polarization high-frequency wave radar system, an adaptive system using horizontal antennas for the suppression of the Es layer interference (ELI) is described. The data received from the horizontal antennas were correlated with the data received from the Vertically Polarized Antennas (VPAs) to estimate and cancel the interference adaptively in the VPAs. Suppressing the interference after each coherent integration time interval, about 25 dB signal-to-interference ratio is expected with the experimentally derived data.

  17. Active system monitoring applied on wind turbines

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad; Parbo, Henrik


    A concept for active system monitoring (ASM) applied on wind turbines is presented in this paper. The concept is based on an injection of a small periodic auxiliary signal in the system. An investigation of the signature from the auxiliary input in residual (error) signals can then be applied...

  18. 76 FR 15791 - National Poultry Improvement Plan and Auxiliary Provisions (United States)


    ...) ADIAFOOD Rapid Pathogen Detection System for Salmonella spp., AES Chemunex Canada. Laval, QC (Canada... ``Salmonella negative'' to the regulations in Sec. 145.83(f) for the U.S. Salmonella Monitored classification... concerns. We continue to believe that the Salmonella negative designation will provide an effective...

  19. 辅助根管冲洗器械的研究新进展%Advances in auxiliary root canal irrigation instrument

    Institute of Scientific and Technical Information of China (English)

    吴丽更; 穆颖


    Root canal irrigation is a must in root canal therapy, however,not a irrigating solution or a com-bination of some irrigating solutions can completely remove the smear layer. Consequently, auxiliary root canal irrigation instrument arises to improve the cleaning efficiency of root canal system . This article reviews four kinds of auxiliary root canal irrigation instruments, namely, the manual irrigation system, pressure switch system, acoustic system and ul-trasonic system.%目前尚未发现一种冲洗液或多种冲洗液的联合应用能够彻底清除根管玷污层.因此,各种辅助根管冲洗器械应运而生,以提高根管系统的清洁率.本文就各种辅助根管冲洗器械如:手动冲洗系统、压力转换系统、声波系统、超声波系统作一综述.

  20. 纵向辅磁双稳态压电悬臂梁非线性动力学%Nonlinear Dynamicson Auxiliary Magnet for a Bistable Piezoelectric Cantilever Beam

    Institute of Scientific and Technical Information of China (English)

    姚明辉; 李印波; 张伟


    为了解决双稳态压电悬臂梁输出电压小等问题,引入了上吸引下排斥纵向辅助磁力,通过实验研究了辅助磁力对于双稳态压电悬臂梁复杂非线性动力学行为的影响. 实验所用的材料为上下对称的层合梁,压电层的材料为极化后的PVDF,基层的材料为黄铜. 对压电悬臂梁进行简谐激励,通过电压和位移的正向扫频和逆向扫频研究系统的跳跃现象,研究辅助磁力对于系统动力学行为的影响,分析纵向辅助磁力对系统由倍周期分叉进入混沌运动的影响. 实验结果表明:当辅助磁铁与主磁铁之间的距离较大时,该双稳态系统表现出明显的硬弹簧特性;当辅助磁铁与主磁铁之间的距离较小时,该双稳态系统表现出明显的软弹簧特性;当辅助磁铁与主磁铁之间的距离由小变大时,系统表现出复杂化的非线性行为.%This paper introduced the auxiliary magnetic force based on the bistable piezoelectric cantilever beam in order to improve the voltage output of the bistable piezoelectric cantilever beam. The influence of the auxiliary magnetic force on the complex nonlinear dynamic responses of the bistable piezoelectric cantilever beam was studied. The experiment structure was a symmetric laminated beam. The material of the piezoelectric layer was PVDF, and the material of the basic layer was brass. The excitation of the piezoelectric cantilever beam was the harmonic excitation. The jump phenomenon was studied by the forward sweep frequency and the reverse sweep frequency of the voltage and displacement. The effect of longitudinal auxiliary magnetic force on the chaotic motion of the system was researched. Experimental results showed that when the distance between the auxiliary magnet and the primary magnet is large, the bistable system exhibits obvious hard spring characteristic. When the distance between the auxiliary magnet and the primary magnet is small, the bistable system exhibits

  1. Auxiliaries for the textile industry and environmental protection

    Directory of Open Access Journals (Sweden)

    Sanda VISAN


    Full Text Available The textile industry is an industrial field that affects the environment, from the plant growth until the production process. The obtaining of environmental licence for Romanian companies that produce textile products is related to elaboration and implementation of a modern system for an environmental management, that consist in utilization of ecological technologies for finishing, in diminution the water and energy consumption, cleaning of waste waters, reutilization of cleaned waters, sustainable management of wastes. In this study, the surfactant categories used in the textile industry that fulfil the conditions of environment protection, are presented. Some exemplifications were made involving the existing surfactants in Romanian textile industry, obtained from both domestic and external production. Also, some recommendation are suggested regarding the utilization of surfactants manufactured from either vegetal oils or chemical/petrochemical wastes, with similar properties as those from import having decreased prices an that affect as small as possible the environment.

  2. Auxiliary Salvage Tow and Rescue: T-STAR (United States)


    Chain 2 Shots 2.5" Die Lock 4 19.7 10,000 lb Stato Anchors and Racks 2 11.2 Retrieval Pendant 600’ 1" 4 1.8 Wire; 2.5” x 1,800’ 2 15.0 Buoys, Crown...89.3 Buoy 4 26.8 Buoy Racks 2 44.6 Lines 11" x 1200’ Cir Nylon 4 7.6 Rescue FADS-III 1 2.9 Recompression Chamber 1 2.7 TOTAL 262.3...Accommodations 9 660 WORKING SPACES Accommodations 33 670 STOWAGE SPACES Accommodations 27 90 SPECIAL PURPOSE SYSTEMS Displacement 2 00 Total

  3. Vitamin C: a new auxiliary treatment of epilepsy? (United States)

    Sawicka-Glazer, Edyta; Czuczwar, Stanisław J


    Although many approaches to the therapy of epilepsy exist, most of antiepileptic drugs, beside certain and unquestioned benefits, have convinced disadvantages. That is the reason for looking for new methods of treatment. Ascorbic acid, as an antioxidant and electron donor accumulated in central nervous system, seems to take part in diminishing reactions of oxidative stress in brain and cooperate with other antioxidants like alpha-tocoferol. Vitamin C, easily transported through the blood-brain barrier, is proved to reduce injury in the hippocampus during seizures. Depending on type of seizures, it has mostly inhibitory activity and even decreases mortality. Moreover, vitamin C acts as a neuroprotective factor by consolidating cell membranes and decreasing lipid peroxidation. A possible adjunctive role of vitamin C in epileptic patients needs to be considered.

  4. Effect of macrostructural control of an auxiliary layer on the CO2 sensing properties of NASICON-based gas sensors


    Morio, Masataka; Hyodo, Takeo; Shimizu, Yasuhiro; Egashira, Makoto


    Macrostructural effects of an auxiliary electrode on the CO2 gas sensing properties of NASICON (Na3Zr2Si2PO12) solid-electrolyte sensors were investigated. The sensor with a porous Li2CO3–BaCO3-based auxiliary layer (mp-Sensor), which was prepared by utilizing constituent metal acetates and polymethylmethacrylate microspheres as a template, showed faster CO2 response and recovery and smaller cross-response against humidity changes than those obtained with a dense auxiliary layer without pores...

  5. Ghostbusters in higher derivative supersymmetric theories: who is afraid of propagating auxiliary fields?

    CERN Document Server

    Fujimori, Toshiaki; Yamada, Yusuke


    We present for the first time a ghost-free higher-derivative chiral model with a propagating auxiliary F-term field (highest component of the chiral multiplet). We obtain this model by removing a ghost in a higher derivative chiral model, with Higgsing it in terms of an auxiliary vector superfield. Depending on the sign of the quadratic derivative term of the chiral superfield, the model contains two ghost free branches of the parameter regions. We find that supersymmetry is spontaneously broken in one branch while it is preserved in the other branch. As a consequence of dynamical F-term field, a conserved U(1) charge corresponding to the number density of $F$ appears, which can be regarded as a generalization of the R-symmetry.

  6. Reexamination of molecular integrals arising from the Dirac equation. Analytical evaluation of molecular auxiliary functions integrals

    CERN Document Server

    Bagci, A


    The author in his previous works were presented a numerical integration method, namely, global-adaptive with the Gauss-Kronrod numerical integration extension in order to accurate calculation of molecular auxiliary functions integrals involve power functions with non-integer exponents. They are constitute elements of molecular integrals arising in Dirac equation when Slater-type orbitals with non-integer principal quantum numbers are used. Binomial series representation of power functions method, so far, is used for analytical evaluation of the molecular auxiliary function integrals however, intervals of integration cover areas beyond the condition of convergence. In the present study, analytical evaluation of these integrals is re-examined. They are expressed via prolate spheroidal coordinates. An alternative analytical approximation are derived. Slowly convergent binomial series representation formulae for power functions is investigated through nonlinear sequence transformations for the acceleration of con...

  7. Optical bandwidth enhancement of heterojunction bipolar transistor laser operation with an auxiliary base signal (United States)

    Then, H. W.; Walter, G.; Feng, M.; Holonyak, N.


    We report the improvement, from 10.5to22GHz, in the optical modulation bandwidth of a quantum-well (QW) heterojunction bipolar transistor laser (TL) by the use of an ac auxiliary base signal. Because of the three-terminal form of the TL, an auxiliary signal can be used to peak the photon output, e.g., stimulated recombination which simultaneously reduces the operating current gain, β(=ICO/IBO), and increases the laser differential gain. A shorter effective base carrier lifetime, τ, owing to the increased QW recombination rate (stimulated recombination), enhanced carrier transport to the "faster" QW collector (reduced β) and differential gain, result in a higher 3dB bandwidth (f3dB=1/2πτ ).

  8. Performance of nursing auxiliaries and technicians in managing piercing cutting material: a necessary study. (United States)

    Moura, Elaine Cristina Carvalho; Moreira, Maria de Fátima Santana; da Fonseca, Soraia Martins


    This study aimed to analyze the knowledge of nursing auxiliaries and technicians in handling and disposing of piercing-cutting material and describe their performance. This qualitative-descriptive research was carried out with three nursing auxiliaries and 12 technicians at a medium-size hospital, totaling 15 participants interviewed through a semi-structured script. Discourse was analyzed through the content analysis technique. Results appoint that, even though the participants have theoretical knowledge on the management of piercing-cutting material, they do not totally follow their knowledge, which exposes them to several biological risks, revealing reproductive knowledge and performance. Thus, we propose the implementation of continuing education programs based on constructivist methodological approach aiming at effective practices in the management and disposal of piercing-cutting material. In this perspective, research clarifying how adults apprehend knowledge can deepen the results described in the study.

  9. Auxiliary particle filter-model predictive control of the vacuum arc remelting process (United States)

    Lopez, F.; Beaman, J.; Williamson, R.


    Solidification control is required for the suppression of segregation defects in vacuum arc remelting of superalloys. In recent years, process controllers for the VAR process have been proposed based on linear models, which are known to be inaccurate in highly-dynamic conditions, e.g. start-up, hot-top and melt rate perturbations. A novel controller is proposed using auxiliary particle filter-model predictive control based on a nonlinear stochastic model. The auxiliary particle filter approximates the probability of the state, which is fed to a model predictive controller that returns an optimal control signal. For simplicity, the estimation and control problems are solved using Sequential Monte Carlo (SMC) methods. The validity of this approach is verified for a 430 mm (17 in) diameter Alloy 718 electrode melted into a 510 mm (20 in) diameter ingot. Simulation shows a more accurate and smoother performance than the one obtained with an earlier version of the controller.

  10. Study on the distribution of strata rock temperature around a driving head with auxiliary ventilation

    Institute of Scientific and Technical Information of China (English)

    GAO Jian-liang


    The distributions of strata rock temperature around a driving head with auxiliary ventilation were analyzed theoretically based on a program which was developed by the authors to predict the thermal environmental conditions in a development heading with forcing auxiliary ventilation. The influences of wetnessof the airway surface were discussed on the cooled zone of the strata rock and on the temperature distribution in the surrounding rock. It is shown that the advancing speed and driving time have little influence on the temperature profile in front of the working face of a driving airway, and the rock temperature 1.5 m ahead of the working face can be taken as the virgin rock temperature.

  11. Simulation of Multi output Fly back Converter with Integrated Auxiliary Buck Converter with reduced components

    Directory of Open Access Journals (Sweden)



    Full Text Available The fly back converter has been widely used for multi outputs due to the simple structure and low cost in low-power applications. This paper presents a new multi output converter. It consists of a half-bridge inverter with boost converter in primary side and a fly back rectifier that is integrated with an auxiliary buck converter in secondary side. The boost converter is used to generate high voltage dc from Low voltage PV cells. The primary switches control the main output voltage and the secondary synchronous switches control the auxiliary output voltage. The main advantages of the proposed converter are that the transformer size can be reduced due to the less magnetizing offset current, all the power switches including synchronous ones can achieve the zero-voltage switching (ZVS and it has no output cross regulation problems. The circuit is simulated using MATLAB. The performance is verified with simulation results.

  12. Study on Commercial Application of FCC with Auxiliary Gasoline Reactor for Improving FCC Naphtha Quality

    Institute of Scientific and Technical Information of China (English)

    Wei Qiang


    This article introduces the commercial application of FCC technology equipped with a gasoline auxiliary reactor in the RFCC unit at PetroChina Harbin Petrochemical Branch Company.Test results have shown the excellent outcome for commercial application of the gasoline upgrading in the auxiliary reactor to reduce the olefin content in FCC naphtha.Application of this technology can reduce the olefin content in FCC naphtha to less than 35v%.Adjustment of the FCC operation towards more severg conditions can further reduce the olefin content in FCC naphtha to less than 20 that the FCC naphtha can meet the current standard or meet more stringent specification requirements in the future to achieve compelling economic and social benefits.

  13. Parallel eigensolver for H(curl) problems using H1-auxiliary space AMG preconditioning

    Energy Technology Data Exchange (ETDEWEB)

    Kolev, T V; Vassilevski, P S


    This report describes an application of the recently developed H{sup 1}-auxiliary space preconditioner for H(curl) problems to the Maxwell eigenvalue problem. The auxiliary space method based on the new (HX) finite element space decomposition introduced in [7], was implemented in the hypre library, [10, 11] under the name AMS. The eigensolver considered in the present paper, referred to as the AME, is an extension of the AMS. It is based on the locally optimal block eigensolver LOBPCG [9] and the parallel AMG (algebraic multigrid) solver BoomerAMG [2] from the hypre library. AME is designed to compute a block of few minimal nonzero eigenvalues and eigenvectors, for general unstructured finite element discretizations utilizing the lowest order Nedelec elements. The main goal of the current report is to document the usage of AME and to illustrate its parallel scalability.

  14. The cutting edge in the blunt space: an anthropological construct of auxiliary nurse midwives’ social world in the community

    Directory of Open Access Journals (Sweden)

    Avanish Kumar


    Full Text Available Auxiliary nurse midwives (ANMs are the most peripheral health providers and manage the rural health sub-centre in a community. They mediate directly between the community and the health system for the management of Maternal and Child Health Programme in India. The purpose of this study was to find out the role of cultural factors, such as ANMs’ caste, age, marital status, being non-resident in the working village and other social factors regarding their acceptance in the community. The study is exploratory and qualitative. The area of study was a multi-caste remote village, Mavaibhachan, in Kanpur Dehat district of Uttar Pradesh, India. Data were collected through in-depth interviews and fieldwork notes taken during and immediately after the interviews with ANMs, and thematically analyzed. Our results show that if ANMs belong to a different caste group, do not live in the working village and are relatively younger, they are socially insecure and stressed and the community hardly accepts them. Despite direct interface with the community, their social status and lowest position in the health system is reflected in acceptability and recognition. The position of ANMs needs to be strengthened, within society and the health system. In order to make public health services effective and efficient the health system has to reduce stratification based on role and status.

  15. A generalized new auxiliary equation method and its applications to nonlinear partial differential equations

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Sheng [Department of Mathematics, Bohai University, Jinzhou 121000 (China)]. E-mail:; Xia, Tiecheng [Department of Mathematics, Bohai University, Jinzhou 121000 (China); Department of Mathematics, Shanghai University, Shanghai 200444 (China)


    In this Letter, a generalized new auxiliary equation method is proposed for constructing more general exact solutions of nonlinear partial differential equations. With the aid of symbolic computation, we choose the combined KdV-mKdV equation and the (2+1)-dimensional asymmetric Nizhnik-Novikov-Vesselov equations to illustrate the validity and advantages of the method. As a result, many new and more general exact solutions are obtained.

  16. Reexamination of molecular integrals arising from the Dirac equation. Analytical evaluation of molecular auxiliary functions integrals


    Bagci, A.


    In this work, analytical solutions to relativistic molecular integrals are proposed for use in ab-initio molecular electronic structure calculations. They are expressed through molecular auxiliary functions integrals in prolate spheroidal coordinates. Recurrence relations and new convergent series representation formulae are derived. They involve Slater-type orbitals basis set with non-integer principal quantum numbers. The comparison is made with the benchmark results of use numerical global...

  17. Sodium--NaK engineering handbook. Volume IV. Sodium pumps, valves, piping, and auxiliary equipment

    Energy Technology Data Exchange (ETDEWEB)

    Foust, O J [ed.


    The handbook is useful for designers in the Liquid Metals Fast Breeder Reactor (LMFBR) program and by the engineering and scientific community performing investigation and experimentation requiring high-temperature Na and NaK technology. Data are presented for pumps, bearings and seals, valves, vessels and piping, and auxiliary equipment including vapor traps, freeze plugs, fuel-channel flow regulators, antivortexing devices, and miscellaneous mechanical elements. Reactor materials are also discussed. (FS)

  18. Think Different: Applying the Old Macintosh Mantra to the Computability of the SUSY Auxiliary Field Problem

    CERN Document Server

    Calkins, Mathew; Gates,, S James; Golding, William M


    Starting with valise supermultiplets obtained from 0-branes plus field redefinitions, valise adinkra networks, and the "Garden Algebra," we discuss an architecture for algorithms that (starting from on-shell theories and, through a well-defined computation procedure), search for off-shell completions. We show in one dimension how to directly attack the notorious "off-shell auxiliary field" problem of supersymmetry with algorithms in the adinkra network-world formulation.

  19. Extended Auxiliary Equation Method and Its Applications to Three Generalized NLS Equations

    Directory of Open Access Journals (Sweden)

    Gui-qiong Xu


    Full Text Available The auxiliary equation method proposed by Sirendaoreji is extended to construct new types of elliptic function solutions of nonlinear evolution equations. The effectiveness of the extended method is demonstrated by applications to the RKL model, the generalized derivative NLS equation and the Kundu-Eckhaus equation. Not only are the Jacobian elliptic function solutions are derived, but also the solitary wave solutions and trigonometric function solutions are obtained in a unified way.

  20. Utilization of Lavandula angustifolia Miller extracts as naturalrepellents, pharmaceutical and industrial auxiliaries

    Directory of Open Access Journals (Sweden)



    Full Text Available Essential oils, absolutes and concretes were prepared from the flowers and leaves of the plant Lavandula angustifolia Miller cultivated in the Bosphorus region of Istanbul, Turkey. The difference in the chemical composition of the mentioned extracts was investigated and compared by using a combination of capillary GC-MS with the aim of offering them as repellent, pharmaceutical and industrial auxiliaries. The IR-spectra, the yields and the physico-chemical data of the extracts were also analysed.

  1. Response to the Comment: ``On the computation of molecular auxiliary functions and ”

    Indian Academy of Sciences (India)

    I I Guseinov


    The Comment `on the computation of auxiliary functions () and ()’ (F E Harris, Pramana – J. Phys. 61, C779 (2003)) is analysed in the arbitrary range of parameters , and . It is shown that our downward recursion approach for () in the range (/) > 1 is more efficient than the well-known upward recursion method, and the upward recursion procedure for () does not have merit for smaller non-zero values of ( < 0.01).

  2. 电力机车辅助电机PID控制研究%Research on electric locomotive auxiliary motor PID control

    Institute of Scientific and Technical Information of China (English)

    王安明; 林辉


    电力机车辅助电机主要是为了保证主电路的正常工作而设计的辅助设备,其是否投入工作取决于主电路的工作状态,即使在环境温度很低的情况下。尽管主电路工作在牵引或制动工况。但这些辅助设备服务的主电路电器设备的温升并不高,这不仅造成能源浪费,增加了设备的损耗,降低其使用寿命,同时也产生很大的机械和电磁噪声,影响乘务作业人员工作的舒适度。选择PID控制策略。以新型传感器为牵引电机的温升检测装置,以PLC作为系统控制单元,以HMI为系统的人机界面,完成了系统硬件方案设计。借助专用工具设计PLC和HMI的软件。实现了电力机车辅助电机的PlD控制..%Electric locomotive auxiliary motor is mainly in order to ensure the main circuit of the normal work and the design of auxiliary equipment, the work is dependent on the working state of the circuit, even when the environmental temperature is low, although the main circuit working in traction or braking, but these auxiliary equipment service main circuit electrical equipment temperature rise is not high, which not only cause energy waste, inerease the equipment loss, reduce its service life, but also greatly influence crew workers working comfort,makes the mechanical and electromagnetic noise. PID is chosen as control strategy, with new sensor for traction motor temperature rise test device, taking PLC as the system control unit, with HMI as the man-machine interface of the system, the system hardware design, using special tool to design PLC and HMI software, realizes the electric locomotive auxiliary motor PID control.

  3. A dimensão política do processo de formação de pessoal auxiliar: a enfermagem rumo ao SUS La dimensión política del proceso de formación del personal auxiliar: la enfermeria rumbo al SUS (Sistema Único de Salud The political dimension of auxiliary personnel education: nursing and the Unified Health System (SUS

    Directory of Open Access Journals (Sweden)

    Alva Helena de Almeida


    aprehendieron la dimensión técnica del proceso, aislada de la política.The change in the administration of the municipality of São Paulo in 1989 innovated the management of health services aiming at implementing the Unified Health System (SUS and using as a fundamental strategy the workers' qualification. Thus, the purpose of this work was to analyze the incorporation of the SUS principles in the programs for the capacitation of nursing auxiliary personnel. Based on the concepts that nurtured the Sanitary Reform and the construction of SUS principles, the methodological framework comprehended interviews with the coordinators of the program. Data analysis enabled authors to recognize that the municipal management policies and practices were committed to SUS guidelines, giving priority to the qualification of health workers who did not have this opportunity and adopting a pedagogy directed to the agents' transformation. The coordinators were motivated to develop the qualification program, recognizing this process as a tool for the SUS implementation. In addition, the coordinators at the regional level understood the technical dimension of this process, isolated from its political dimension.

  4. Detection of facilities in satellite imagery using semi-supervised image classification and auxiliary contextual observables

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Neal R [Los Alamos National Laboratory; Ruggiero, Christy E [Los Alamos National Laboratory; Pawley, Norma H [Los Alamos National Laboratory; Brumby, Steven P [Los Alamos National Laboratory; Macdonald, Brian [Los Alamos National Laboratory; Balick, Lee [Los Alamos National Laboratory; Oyer, Alden [Los Alamos National Laboratory


    Detecting complex targets, such as facilities, in commercially available satellite imagery is a difficult problem that human analysts try to solve by applying world knowledge. Often there are known observables that can be extracted by pixel-level feature detectors that can assist in the facility detection process. Individually, each of these observables is not sufficient for an accurate and reliable detection, but in combination, these auxiliary observables may provide sufficient context for detection by a machine learning algorithm. We describe an approach for automatic detection of facilities that uses an automated feature extraction algorithm to extract auxiliary observables, and a semi-supervised assisted target recognition algorithm to then identify facilities of interest. We illustrate the approach using an example of finding schools in Quickbird image data of Albuquerque, New Mexico. We use Los Alamos National Laboratory's Genie Pro automated feature extraction algorithm to find a set of auxiliary features that should be useful in the search for schools, such as parking lots, large buildings, sports fields and residential areas and then combine these features using Genie Pro's assisted target recognition algorithm to learn a classifier that finds schools in the image data.

  5. Overtaking Safety Evaluation and Setting of Auxiliary Lane on Two-Lane Highway in China

    Directory of Open Access Journals (Sweden)

    Guozhu Cheng


    Full Text Available Overtaking experiments on four two-lane highways were conducted. The data of overtaking conflict time (the time difference between the time of driving back to the original lane and the time of meeting with the first opposing vehicle and experimental drivers’ risk feeling were observed. Membership was adopted to denote the experimental drivers’ risk feelings which also denote the severity of traffic conflict. Membership ranges from 0 to 1 and corresponding risk becomes higher; that is, traffic conflict becomes more serious. According to the observed relationship between overtaking conflict time, and drivers’ risk feeling membership, Cauchy distribution function was adopted as membership function. The thresholds of the severity of traffic conflict were determined through Delphi method. The relationship model among traffic volume, overtaking conflict time and design speed was established according to experimental data. Then the idea of setting auxiliary lane on two-lane highway in China was presented. And the traffic volume values that need setting auxiliary lane corresponding to different design speed and traffic conflict degree were given according to the established model. It is expected to improve the traffic safety level of two-lane highway in China through setting auxiliary lane.

  6. Active fault detection in MIMO systems

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad


    The focus in this paper is on active fault detection (AFD) for MIMO systems with parametric faults. The problem of design of auxiliary inputs with respect to detection of parametric faults is investigated. An analysis of the design of auxiliary inputs is given based on analytic transfer functions...

  7. Study on Use of Fuel-Cell Auxiliary Power Units in Refrigerator Cars Employed for Delivery to Convenience Store (United States)

    Katayama, Noboru; Kamiyama, Hideyuki; Kogoshi, Sumio; Kudo, Yusuke; Fukada, Takafumi; Ogawa, Makoto

    The use of fuel-cell auxiliary power units (FC-APU) in refrigerator cars employed delivery to for convenience store delivery has been studied. The delivery pattern is assumed to be a typical pattern that includes driving between convenience stores or between a delivery center and a convenience store, unloading, driver's lunch break. The M15 driving mode, which simulates the driving condition in urban areas, is used as the driving mode in the delivery pattern. The FC-APU system includes a proton-exchange membrane fuel cell (PEFC) module, an inverter, and DC/DC converter. Bench tests of the FC-APU are performed to determine the hydrogen fuel consumption rate and the energy efficiency; these values depend on the output power of the PEFC module. The calculated relationship between the output power and fuel consumption rate of a current used system, which consists of an alternator and a secondary battery, are used to estimate the energy efficiency of the current used system. On the basis of the measurement data in this study and the results for the model proposed by Brodric et al. [C. J. Brodrick et al., Trans. Res. D, vol 7, pp. 303 (2002)], the payback period is calculated. The results indicate that the payback period would be 2.1 years when the FC-APU operates at a load of 70%.

  8. Automation System Design Connector of the Auxiliary Project of the Middle Line of the South-to-North Water Transfer Project%南水北调中线配套工程自动化系统设计接口

    Institute of Scientific and Technical Information of China (English)


    By defining automation system structure layer and platform structure, distinguish different design of the automa-tion system interior and civil engineering project, providing the design conditions in different professionals, it effectively avoid the design disorder and cross, and ensure the unity and integrity of automation system design.%  通过自动化系统结构层次、平台构成,划清了自动化系统内部及其与土建工程等不同设计人间的接口界面,规定了不同专业间的设计条件,从而有效避免了接口衔接不清、项目交叉混乱等问题,保证了自动化系统设计统一性、实施完整性。

  9. Study on 3D printer production of auxiliary device for upper limb for medical imaging test

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeong Gyun [Dept. of Radiological Science, Far East University, Eumsung (Korea, Republic of); Yoon, Jae Ho [Jukwang Precision Co., Ltd., Gumi (Korea, Republic of); Choi, Seong Dae [Dept. of Mechanical system engineering, Kumoh Institute of Technology, Gumi (Korea, Republic of)


    There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are 120 X 150 X 190 mm, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

  10. Estimation of Finite Population Ratio When Other Auxiliary Variables are Available in the Study

    Directory of Open Access Journals (Sweden)

    Jehad Al-Jararha


    Full Text Available The estimation of the population total $t_y,$ by using one or moreauxiliary variables, and the population ratio $\\theta_{xy}=t_y/t_x,$$t_x$ is the population total for the auxiliary variable $X$, for afinite population are heavily discussed in the literature. In thispaper, the idea of estimation the finite population ratio$\\theta_{xy}$ is extended to use the availability of auxiliaryvariable $Z$ in the study, such auxiliary variable  is not used inthe definition of the population ratio. This idea may be  supported by the fact that the variable $Z$  is highly correlated with the interest variable $Y$ than the correlation between the variables $X$ and $Y.$ The availability of such auxiliary variable can be used to improve the precision of the estimation of the population ratio.  To our knowledge, this idea is not discussed in the literature.  The bias, variance and the mean squares error  are given for our approach. Simulation from real data set,  the empirical relative bias and  the empirical relative mean squares error are computed for our approach and different estimators proposed in the literature  for estimating the population ratio $\\theta_{xy}.$ Analytically and the simulation results show that, by suitable choices, our approach gives negligible bias and has less mean squares error.  

  11. Neoclassical toroidal torque generation by auxiliary heating in non-axisymmetric tori (United States)

    Lazzaro, E.; Nowak, S.; Sauter, O.


    In conditions of ideal axisymmetry, for a magnetized plasma in a generic bounded domain, necessarily toroidal, the uniform absorption of external energy (e.g. rf or isotropic alpha heating) clearly cannot give rise to net forces or torques. A rather common experimental observation on contemporary tokamaks is that the near central absorption of auxiliary heating power (often ICH, ECH, and LHCD) and current drive in presence of non axisymmetric magnetic perturbations, including tearing modes, drives a bulk plasma rotation in the co  -  I p direction. Also growing tearing modes provide a nonlinear magnetic braking that tends to flatten the rotation profile and clamp it at the q-rational surfaces. The physical origin of the torque associated with P aux absorption could be due the effects of asymmetry in deposition or in the equilibrium configuration, but here we consider also the effect of the response of the so called neoclassical offset velocity to the power dependent heat flow increment. The neoclassical toroidal viscosity (NTV), due to error fields, internal magnetic kink or tearing modes tends to relax the plasma rotation to this asymptotic speed, which in absence of auxiliary heating is of the order of the ion diamagnetic velocity. It can be shown by a kinetic calculation, this offset velocity is a function of the absorbed heat and therefore of the injected auxiliary power, thereby forcing the plasma rotation in a direction opposite to the initial, to large values. The problem is discussed in the frame of the theoretical models of neoclassical toroidal viscosity.

  12. Implementation of electromagnetically induced transparency in a metamaterial controlled with auxiliary waves

    CERN Document Server

    Nakanishi, Toshihiro


    We propose a metamaterial to realize true electromagnetically induced transparency (EIT), where the incidence of an auxiliary electromagnetic wave called the control wave induces transparency for a probe wave. The analogy to the original EIT effect in an atomic medium is shown through analytical and numerical calculations derived from a circuit model for the metamaterial. We performed experiments to demonstrate the EIT effect of the metamaterial in the microwave region. The width and position of the transparent region can be controlled by the power and frequency of the control wave. We also observed asymmetric transmission spectra unique to the Fano resonance.

  13. Evaluation of overlap integrals with integer and noninteger n Slater-type orbitals using auxiliary functions. (United States)

    Guseinov, Israfil; Mamedov, Bahtiyar


    The series expansion formulae are derived for the overlap integrals with arbitrary integer n and noninteger n* Slater-type orbitals (ISTOs and NISTOs) in terms of a product of well-known auxiliary functions A(sigma) and B (k). The series becomes an ordinary closed expression when both principal quantum numbers n* and n'* of orbitals are integer n*= n and n'*= n'. These formulae are especially useful for the calculation of overlap integrals for large quantum numbers. Accuracy of the results is satisfactory for values of integer and noninteger quantum numbers up to n= n'=60, n*= n'*orbitals and internuclear distances.

  14. Analysis of Circularly Polarized Hemispheroidal Dielectric Resonator Antenna Phased Arrays Using the Method of Auxiliary Sources

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav


    The method of auxiliary sources is employed to model and analyze probe-fed hemispheroidal dielectric resonator antennas and arrays. Circularly polarized antenna elements of different designs are analyzed, and impedance bandwidths of up to 14.7% are achieved. Selected element designs are subsequen...... are subsequently employed in a seven-element phased array. The array performance is analyzed with respect to scan loss and main beam directivity as a function of scan angle and frequency, and the influence of element separation is investigated....

  15. Effect of Auxiliary Gases on Combustion Synthesis of Si3N4

    Institute of Scientific and Technical Information of China (English)

    Weiping SHEN; Fei WANG; Zhuohui WU; Changchun GE


    This paper presents results of combustion synthesis (Self-Propagating High Temperature Synt hesis, SHS) of Si3N4under nitrogen with argon, hydrogen or ammonia. Higher percentages of α-Si3N4 content were obtained in large size cakes in SHS with hydrogen and ammonia than those with argon. Effect of the auxiliary gases for combustion synthesis of Si3N4 on α phase content, on phase transformation of α-Si3N4 toβ-Si3N4 in SHS Si3N4 and on oxygen content in SHS Si3N4 were investigated.



    Poslek, Karla


    The thesis titled Auxiliary and other functions of verbs be and have and their equivalents in Slovene represents the theory of a verb in general and the verbs be and have in different functions and tenses. The theory of aspect and also the theory of the following tenses or aspects were precisely analyzed: the present progressive, the past progressive, the present perfective, the past perfective. The empirical part was based on the two mentioned verbs. We used Dan Brown’s The Da Vinci Code ...

  17. Convex half-quadratic criteria and interacting auxiliary variables for image restoration. (United States)

    Idier, J


    This paper deals with convex half-quadratic criteria and associated minimization algorithms for the purpose of image restoration. It brings a number of original elements within a unified mathematical presentation based on convex duality. Firstly, the Geman and Yang's and Geman and Reynolds's constructions are revisited, with a view to establishing the convexity properties of the resulting half-quadratic augmented criteria, when the original nonquadratic criterion is already convex. Secondly, a family of convex Gibbsian energies that incorporate interacting auxiliary variables is revealed as a potentially fruitful extension of the Geman and Reynolds's construction.

  18. Skin color modeling using the radiative transfer equation solved by the auxiliary function method: inverse problem. (United States)

    Magnain, Caroline; Elias, Mady; Frigerio, Jean-Marc


    In a previous article [J. Opt. Soc. Am. A 24, 2196 (2007)] we have modeled skin color using the radiative transfer equation, solved by the auxiliary function method. Three main parameters have been determined as being predominant in the diversity of skin color: the concentrations of melanosomes and of red blood cells and the oxygen saturation of blood. From the reflectance spectrum measured on real Caucasian skin, these parameters are now evaluated by minimizing the standard deviation on the adjusted wavelength range between the experimental spectrum and simulated spectra gathered in a database.

  19. Development of the NASA MCAT Auxiliary Telescope for Orbital Debris Research (United States)

    Frith, James; Lederer, Sue; Cowardin, Heather; Buckalew, Brent; Hickson, Paul; Anz-Meador, Phillip


    The National Aeronautical Space Administration has deployed the Meter Class Autonomous Telescope (MCAT) to Ascension Island with plans for it to become fully operational by summer 2016. This telescope will be providing data in support of research being conducted by the Orbital Debris Program Office at the Johnson Space Center. In addition to the main observatory, a smaller, auxiliary telescope is being deployed to the same location to augment and support observations generated by MCAT. It will provide near-simultaneous photometry and astrometry of debris objects, independent measurements of the seeing conditions, and offload low priority targets from MCAT's observing queue. Its hardware and software designs are presented here The National Aeronautical and Space Administration (NASA) has recently deployed the Meter Class Autonomous Telescope (MCAT) to Ascension Island. MCAT will provide NASA with a dedicated optical sensor for observations of orbital debris with the goal of statistically sampling the orbital and photometric characteristics of the population from low Earth to Geosynchronous orbits. Additionally, a small auxiliary telescope, co-located with MCAT, is being deployed to augment its observations by providing near-simultaneous photometry and astrometry, as well as offloading low priority targets from MCAT's observing queue. It will also serve to provide an independent measurement of the seeing conditions to help monitor the quality of the data being produced by the larger telescope. Comprised of off-the-shelf-components, the MCAT Auxiliary Telescope will have a 16-inch optical tube assembly, Sloan g'r'i'z' and Johnson/Cousins BVRI filters, and a fast tracking mount to help facilitate the tracking of objects in low Earth orbit. Tracking modes and tasking will be similar to MCAT except an emphasis will be placed on observations that provide more accurate initial orbit determination for the objects detected by MCAT. The near-simultaneous observations will

  20. A remarkably stable TipE gene cluster: evolution of insect Para sodium channel auxiliary subunits

    Directory of Open Access Journals (Sweden)

    Li Jia


    Full Text Available Abstract Background First identified in fruit flies with temperature-sensitive paralysis phenotypes, the Drosophila melanogaster TipE locus encodes four voltage-gated sodium (NaV channel auxiliary subunits. This cluster of TipE-like genes on chromosome 3L, and a fifth family member on chromosome 3R, are important for the optional expression and functionality of the Para NaV channel but appear quite distinct from auxiliary subunits in vertebrates. Here, we exploited available arthropod genomic resources to trace the origin of TipE-like genes by mapping their evolutionary histories and examining their genomic architectures. Results We identified a remarkably conserved synteny block of TipE-like orthologues with well-maintained local gene arrangements from 21 insect species. Homologues in the water flea, Daphnia pulex, suggest an ancestral pancrustacean repertoire of four TipE-like genes; a subsequent gene duplication may have generated functional redundancy allowing gene losses in the silk moth and mosquitoes. Intronic nesting of the insect TipE gene cluster probably occurred following the divergence from crustaceans, but in the flour beetle and silk moth genomes the clusters apparently escaped from nesting. Across Pancrustacea, TipE gene family members have experienced intronic nesting, escape from nesting, retrotransposition, translocation, and gene loss events while generally maintaining their local gene neighbourhoods. D. melanogaster TipE-like genes exhibit coordinated spatial and temporal regulation of expression distinct from their host gene but well-correlated with their regulatory target, the Para NaV channel, suggesting that functional constraints may preserve the TipE gene cluster. We identified homology between TipE-like NaV channel regulators and vertebrate Slo-beta auxiliary subunits of big-conductance calcium-activated potassium (BKCa channels, which suggests that ion channel regulatory partners have evolved distinct lineage

  1. Transition state models for probing stereoinduction in Evans chiral auxiliary-based asymmetric aldol reactions. (United States)

    Shinisha, C B; Sunoj, Raghavan B


    The use of chiral auxiliaries is one of the most fundamental protocols employed in asymmetric synthesis. In the present study, stereoselectivity-determining factors in a chiral auxiliary-based asymmetric aldol reaction promoted by TiCl(4) are investigated by using density functional theory methods. The aldol reaction between chiral titanium enolate [derived from Evans propionyl oxazolidinone (1a) and its variants oxazolidinethione (1b) and thiazolidinethione (1c)] and benzaldehyde is examined by using transition-state modeling. Different stereochemical possibilities for the addition of titanium enolates to aldehyde are compared. On the basis of the coordination of the carbonyl/thiocarbonyl group of the chiral auxiliary with titanium, both pathways involving nonchelated and chelated transition states (TSs) are considered. The computed relative energies of the stereoselectivity-determining C-C bond formation TSs in the nonchelated pathway, for both 1a and 1c, indicate a preference toward Evans syn aldol product. The presence of a ring carbonyl or thiocarbonyl group in the chiral auxiliary renders the formation of neutral TiCl(3)-enolate, which otherwise is energetically less favored as compared to the anionic TiCl(4)-enolate. Hence, under suitable conditions, the reaction between titanium enolate and aldehyde is expected to be viable through chelated TSs leading to the selective formation of non-Evans syn aldol product. Experimentally known high stereoselectivity toward Evans syn aldol product is effectively rationalized by using the larger energy differences between the corresponding diastereomeric TSs. In both chelated and nonchelated pathways, the attack by the less hindered face of the enolate on aldehyde through a chair-like TS with an equatorial disposition of the aldehydic substituent is identified as the preferred mode. The steric hindrance offered by the isopropyl group and the possible chelation are identified as the key reasons behind the interesting

  2. STS-31 Discovery, OV-103, auxiliary power unit 1 (APU-1) controller (United States)


    The controller for Discovery's, Orbiter Vehicle (OV) 103's, auxiliary power unit 1 (APU-1) is documented before removal following the launch scrub on 04-10-90. The controller weighs about 15 pounds and controls the speed of the APU. It was flown to the vendor, Sundstrand Corp., Rockford, Illinois, for analysis and testing. Launch of OV-103 on mission STS-31 has been rescheduled for 04-24-90 following the successful replacement of the APU-1 and the recharging of the Hubble Space Telescope's (HST's) nickel-hydrogen batteries. View provided by the Kennedy Space Center (KSC) with alternate KSC number KSC-90PC-663.

  3. Estimation of finite population mean with known coefficient of variation of an auxiliary character

    Directory of Open Access Journals (Sweden)

    Housila P. Singh


    Full Text Available This paper deals with the problem of estimating population mean Y of the study variate y using information on population mean X and coefficient of variation Cx of an auxiliary character x. We have suggested an estimator for Y and its properties are studied in the context of single sampling. It is shown that the proposed estimator is more efficient than Sisodia and Dwivedi (1981 estimator and Pandey and Dubey (1988 estimator under some realistic conditions. An empirical study is carried out to examine the merits of the constructed estimator over others.

  4. Universal machine ''Shtrek'' and the tractor-lifter with pneumatic-equipment control. [Auxiliary multipurpose materials handling equipment

    Energy Technology Data Exchange (ETDEWEB)

    Bal' bert, B.M.; Borumenskiy, V.A.; Lishenko, A.P.; Mitchenko, G.A.


    The machine ''Shtrek'' is described. It makes it possible to mechanize over 20 auxiliary operations: loading-unloading operations: extraction of old and deformed timbering; dissmantling of obstructions; erection of different types of timbering; making and restoring of drainage channels; laying and straightening of a drift and its leveling; assembly and disassembly of pipelines and mine equipment, etc. Depending on the type of operation, the machine has the corresponding suspended equipment. The elementary variant has a limited area of application at mines of the central region of the Dunbass. Currently a pneumatic variant of the machine ''Shtrek'' has been developed. The electric motor and the starter of the pumping equipment of the machine have been replaced by a pneumatic motor and pneumatically controlled valve KTM-50. In this case there was significant reduction in the weight of the pumping equipment and in its overall dimensions; the electric drive of the hydraulic distributors for controlling the mechanisms were replaced by simpler pneumatic ones; the logical circuit of the control system was constructed on the USEPPA elements. A specialized tractor-lifter designed for moving suspended loads is described for auxiliary operations in the near-face zone of the preparatory drifts. The machine also lifts and lowers the boom, rotates the boom by 270/sup 0/ and additionally lifts and lowers the weight-lifting hook.

  5. Sensitivity Analysis of Core Damage by Loss of Auxiliary Feed Water during the Extended Loss of All AC Power

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Woo Jae; Chung, Soon Il; Hwang, Su Hyun; Lee, Kyung Jin; Lee, Byung Chul [FNC Tech., Yongin (Korea, Republic of); Yun, Duk Joo; Lee, Seung Chan [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)


    In this study, the reactor core damage time for OPR1000 type Nuclear Power Plant (NPP) was analyzed to develop a strategy to handle ELAP and to apply to the EOP. The reactor core damage time in the ELAP condition was calculated according to the time of Auxiliary Feedwater (AFW) loss. Fukushima accident was caused by long hours of Station Black Out (SBO) caused by natural disaster beyond Design Based Accident (DBA) criteria. It led to the reactor core damage. After the accident, the regulatory authorities of each country (Japan, US, EU, IAEA, and etc.) recommended developing the necessary systems and strategies in order to cover up the Extended Loss of All AC Power (ELAP) such as one occurred in the Fukushima accident. And the need of procedure or guideline to cope with ELAP has been raised through the stress test for Wolsong Nuclear Power Plant unit 1. Current Emergency Operating Procedures (EOP) used in domestic nuclear power plant are seemed to be insufficient to cope with ELAP. Therefore, it has been required to be improved. As the result, the time of AFW loss in the ELAP condition influences greatly on core damage time.

  6. MRA Images Identification of the Artery Blood Vessel of the Knee with SOM LVQ Neural Networks as Auxiliary. (United States)

    Huang, Hung-Chun; Chien, Chia-Hung; Shih, Ting-Fang; Chong, Fok-Ching


    The ways of angiography are divided into two kinds at present: the invasive type and the non invasive type. Because the magnetic resonance angiography (MRA) has advantages of the non invasive type, thus people can accept MRA more easily. Presently, to diagnoses for the initial stage triage of the blood vessel on clinic by MRA mostly. We to be allowed to see clearly that the shape of lower limb artery which like the dendrite and the blood vessel is thick from the trunk to the thin branch, also we can see the narrow embolism and the blocked place through MRA. This study is aiming at the image of artery of blood vessel by MRA assay, and is attempting to use two-dimensional structure of SOM and LVQ to make out topologies for the shape of artery of blood vessel. We expect that MRA could be useful tools for earlier on the quick triage and auxiliary diagnosis of doctors. By actual examples truly prove that patients after peripheral arterial occlusive disease (PAOD) treatment can diagnose effectively, shorten the time of patients waiting for reports and improve the whole efficiency of the medical treatment system.

  7. Seismic dynamic analysis of Heat Exchangers inside of the Auxiliary Buildings in AP1000{sup T}M NPP

    Energy Technology Data Exchange (ETDEWEB)

    Di Fonzo, M.; Aragon, J.; Moraleda, F.; Palazuelos, M.; San vicente, J. L.


    Seismic dynamic analysis was carried out for the Heat Exchangers (RNS-HR) located inside of the Auxiliary Building in AP 1000{sup T}M NPP. The main function of the RNS-HX is to provide shutdown reactor cooling. These equipment's are safety-related. So the seismic analysis was done using the methodology for Seismic Category I (SCI) structures. The most important topic is that the RNS-HX shall withstand the effects of the Safe Shutdown Earthquake (SSE) and maintain the specified design functions. for the analysis, two finite element models (FEM) were built in order to investigate the structural response of the couple system of building and equipment. The response spectra method was used. The floor response spectra (FRS) at the slab-wall connection were used as input Lateral seismic restrain was necessary to added in order to achieve the natural frequency of 33 Hz. The global structural response was obtained by means of the modal combination method indicated in the Regulatory Guide 1.92.

  8. Organics and nitrogen removal from textile auxiliaries wastewater with A2O-MBR in a pilot-scale. (United States)

    Sun, Faqian; Sun, Bin; Hu, Jian; He, Yangyang; Wu, Weixiang


    The removal of organic compounds and nitrogen in an anaerobic-anoxic-aerobic membrane bioreactor process (A(2)O-MBR) for treatment of textile auxiliaries (TA) wastewater was investigated. The results show that the average effluent concentrations of chemical oxygen demand (COD), ammonium nitrogen (NH4(+)-N) and total nitrogen (TN) were about 119, 3 and 48 mg/L under an internal recycle ratio of 1.5. The average removal efficiency of COD, NH4(+)-N and TN were 87%, 96% and 55%, respectively. Gas chromatograph-mass spectrometer analysis indicated that, although as much as 121 different types of organic compounds were present in the TA wastewater, only 20 kinds of refractory organic compounds were found in the MBR effluent, which could be used as indicators of effluents from this kind of industrial wastewater. Scanning electron microscopy analysis revealed that bacterial foulants were significant contributors to membrane fouling. An examination of foulants components by wavelength dispersive X-ray fluorescence showed that the combination of organic foulants and inorganic compounds enhanced the formation of gel layer and thus caused membrane fouling. The results will provide valuable information for optimizing the design and operation of wastewater treatment system in the textile industry.

  9. A randomized, controlled study of an educational intervention to improve recall of auxiliary medication labeling and adherence to antibiotics

    Directory of Open Access Journals (Sweden)

    Jade A Pham


    Full Text Available Purpose: To evaluate whether medication counseling with emphasis on auxiliary labels improves recall of auxiliary label information and adherence to medication schedules. Methods: A prospective, randomized study of an educational intervention in community pharmacies near Baltimore, Maryland. Fifty literate, English-speaking adults receiving one of the 18 commonly dispensed antibiotics were randomized to receive a counseling session or no counseling. Five to seven days after medication pickup, a structured phone interview was conducted to capture data on recall of auxiliary labels and adherence. Results: A total of 39 subjects completed the phone interview (78%. The rate of correct recall was high: 77% correct recall for all three labels. Among those with incorrect recall, 7 out of 9 subjects received no counseling (p = 0.11. The auxiliary labels incorrectly recalled were all related to dietary restrictions. Conclusion: The findings from this study suggest that medication counseling emphasizing auxiliary label information may lead to improved recall and adherence to antibiotics. Additional studies are required to confirm the preliminary findings and determine whether they correspond to improved adherence. Information most commonly misunderstood were related to dietary restrictions. Additional research focusing on counseling related to dietary restrictions is recommended.

  10. Diverse roles for auxiliary subunits in phosphorylation-dependent regulation of mammalian brain voltage-gated potassium channels. (United States)

    Vacher, Helene; Trimmer, James S


    Voltage-gated ion channels are a diverse family of signaling proteins that mediate rapid electrical signaling events. Among these, voltage-gated potassium or Kv channels are the most diverse partly due to the large number of principal (or α) subunits and auxiliary subunits that can assemble in different combinations to generate Kv channel complexes with distinct structures and functions. The diversity of Kv channels underlies much of the variability in the active properties between different mammalian central neurons and the dynamic changes that lead to experience-dependent plasticity in intrinsic excitability. Recent studies have revealed that Kv channel α subunits and auxiliary subunits are extensively phosphorylated, contributing to additional structural and functional diversity. Here, we highlight recent studies that show that auxiliary subunits exert some of their profound effects on dendritic Kv4 and axonal Kv1 channels through phosphorylation-dependent mechanisms, either due to phosphorylation on the auxiliary subunit itself or by influencing the extent and/or impact of α subunit phosphorylation. The complex effects of auxiliary subunits and phosphorylation provide a potent mechanism to generate additional diversity in the structure and function of Kv4 and Kv1 channels, as well as allowing for dynamic reversible regulation of these important ion channels.

  11. Numerical simulation on a straight-bladed vertical axis wind turbine with auxiliary blade (United States)

    Li, Y.; Zheng, Y. F.; Feng, F.; He, Q. B.; Wang, N. X.


    To improve the starting performance of the straight-bladed vertical axis wind turbine (SB-VAWT) at low wind speed, and the output characteristics at high wind speed, a flexible, scalable auxiliary vane mechanism was designed and installed into the rotor of SB-VAWT in this study. This new vertical axis wind turbine is a kind of lift-to-drag combination wind turbine. The flexible blade expanded, and the driving force of the wind turbines comes mainly from drag at low rotational speed. On the other hand, the flexible blade is retracted at higher speed, and the driving force is primarily from a lift. To research the effects of the flexible, scalable auxiliary module on the performance of SB-VAWT and to find its best parameters, the computational fluid dynamics (CFD) numerical calculation was carried out. The calculation result shows that the flexible, scalable blades can automatic expand and retract with the rotational speed. The moment coefficient at low tip speed ratio increased substantially. Meanwhile, the moment coefficient has also been improved at high tip speed ratios in certain ranges.

  12. Semi-active engine mount design using auxiliary magneto-rheological fluid compliance chamber (United States)

    Mansour, H.; Arzanpour, S.; Golnaraghi, M. F.; Parameswaran, A. M.


    Engine mounts are used in the automotive industry to isolate engine and chassis by reducing the noise and vibration imposed from one to the other. This paper describes modelling, simulation and design of a semi-active engine mount that is designed specifically to address the complicated vibration pattern of variable displacement engines (VDE). The ideal isolation for VDE requires the stiffness to be switchable upon cylinder activation/deactivation operating modes. In order to have a modular design, the same hydraulic engine mount components are maintained and a novel auxiliary magneto-rheological (MR) fluid chamber is developed and retrofitted inside the pumping chamber. The new compliance chamber is a controllable pressure regulator, which can effectively alter the dynamic performance of the mount. Switching between different modes happens by turning the electrical current to the MR chamber magnetic coil on and off. A model has been developed for the passive hydraulic mount and then it is extended to include the MR auxiliary chamber as well. A proof-of-concept prototype of the design has been fabricated which validates the mathematical model. The results demonstrate unique capability of the developed semi-active mount to be used for VDE application.

  13. A SLAM based on auxiliary marginalised particle filter and differential evolution (United States)

    Havangi, R.; Nekoui, M. A.; Teshnehlab, M.; Taghirad, H. D.


    FastSLAM is a framework for simultaneous localisation and mapping (SLAM) using a Rao-Blackwellised particle filter. In FastSLAM, particle filter is used for the robot pose (position and orientation) estimation, and parametric filter (i.e. EKF and UKF) is used for the feature location's estimation. However, in the long term, FastSLAM is an inconsistent algorithm. In this paper, a new approach to SLAM based on hybrid auxiliary marginalised particle filter and differential evolution (DE) is proposed. In the proposed algorithm, the robot pose is estimated based on auxiliary marginal particle filter that operates directly on the marginal distribution, and hence avoids performing importance sampling on a space of growing dimension. In addition, static map is considered as a set of parameters that are learned using DE. Compared to other algorithms, the proposed algorithm can improve consistency for longer time periods and also, improve the estimation accuracy. Simulations and experimental results indicate that the proposed algorithm is effective.

  14. Design, simulation and modelling of auxiliary exoskeleton to improve human gait cycle. (United States)

    Ashkani, O; Maleki, A; Jamshidi, N


    Exoskeleton is a walking assistance device that improves human gait cycle through providing auxiliary force and transferring physical load to the stronger muscles. This device takes the natural state of organ and follows its natural movement. Exoskeleton functions as an auxiliary device to help those with disabilities in hip and knee such as devotees, elderly farmers and agricultural machinery operators who suffer from knee complications. In this research, an exoskeleton designed with two screw jacks at knee and hip joints. To simulate extension and flexion movements of the leg joints, bearings were used at the end of hip and knee joints. The generated torque and motion angles of these joints obtained as well as the displacement curves of screw jacks in the gait cycle. Then, the human gait cycle was simulated in stance and swing phases and the obtained torque curves were compared. The results indicated that they followed the natural circle of the generated torque in joints with a little difference from each other. The maximum displacement obtained 4 and 6 cm in hip and knee joints jack respectively. The maximum torques in hip and knee joints were generated in foot contact phase. Also the minimum torques in hip and knee joints were generated in toe off and heel off phases respectively.

  15. Use of empirical likelihood to calibrate auxiliary information in partly linear monotone regression models. (United States)

    Chen, Baojiang; Qin, Jing


    In statistical analysis, a regression model is needed if one is interested in finding the relationship between a response variable and covariates. When the response depends on the covariate, then it may also depend on the function of this covariate. If one has no knowledge of this functional form but expect for monotonic increasing or decreasing, then the isotonic regression model is preferable. Estimation of parameters for isotonic regression models is based on the pool-adjacent-violators algorithm (PAVA), where the monotonicity constraints are built in. With missing data, people often employ the augmented estimating method to improve estimation efficiency by incorporating auxiliary information through a working regression model. However, under the framework of the isotonic regression model, the PAVA does not work as the monotonicity constraints are violated. In this paper, we develop an empirical likelihood-based method for isotonic regression model to incorporate the auxiliary information. Because the monotonicity constraints still hold, the PAVA can be used for parameter estimation. Simulation studies demonstrate that the proposed method can yield more efficient estimates, and in some situations, the efficiency improvement is substantial. We apply this method to a dementia study.

  16. Survey of technology for hybrid vehicle auxiliary power units. Interim report, April 1994-June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Widener, S.K.


    The state-of-the-art of heat engines for use as auxiliary power units in hybrid vehicles is surveyed. The study considers reciprocating or rotary heat engines, excluding gas turbines and fuel cells. The relative merits of various engine-generator concepts are compared. The concepts are ranked according to criteria tailored for a series-type hybrid drive. The two top APU concepts were the free-piston engine/linear generator (FPELG) and the Wankel rotary` engine. The FPELG is highly ranked primarily because of thermal efficiency cost, producibility. reliability, and transient response advantages; it is a high risk concept because of unproven technology. The Wankel engine is proven. with high power density, low cost and low noise. Four additional competitive concepts include two-stroke spark-ignition engine. two-stroke gas generator with turboalternator, free-piston engine gas generator with turboalternator, and homogeneous charge compression ignition engine. This study recommends additional work, including cycle simulation development and preliminary design to better quantify thermal efficiency and power density. Auxiliary concepts were also considered, including two which warrant further study: electrically actuated valves, and lean turndown of a normally stoichiometric engine. These concepts should be evaluated by retrofitting to existing engines.

  17. Controlling size and uniformity of molecularly imprinted nanoparticles using auxiliary template. (United States)

    Chen, Zhiyong; Ye, Lei


    Molecularly imprinted nanomaterials are gaining substantial importance. As a simple and efficient synthetic method, precipitation polymerization has been used to prepare uniform molecularly imprinted microspheres for numerous template compounds. Despite of its general applicability, the difficulty of obtaining uniform particles for some difficult templates by precipitation polymerization has been reported. In this work, we attempted to produce uniform atrazine-imprinted nanoparticles using propranolol as an auxiliary template under standard precipitation polymerization condition. When propranolol was added in the prepolymerization mixture for atrazine imprinting, it displayed a significant effect on particle size and size distribution of atrazine-imprinted polymers. The molecular binding characteristics of the molecularly imprinted polymer (MIP) nanoparticles were found to be dependent on the relative ratios of the two templates. Under an optimal template propranolol-atrazine ratio of 1:3 mol/mol, very uniform imprinted nanoparticles (d(H)  = 106 nm) with a polydispersity index of 0.07 were obtained. The loading of the auxiliary template (propranolol) could be reduced to as low as 5% without sacrificing the uniformity of the MIP nanoparticles. The uniform MIP nanoparticles could be easily encapsulated into polyethylene terephthalate nanofibers using a simple electrospinning technique. The composite nanofibers containing the MIP nanoparticles maintained specific molecular binding capability for both atrazine and propranolol.

  18. [Spatial pattern of soil fertility in Bashan tea garden: a prediction based on environmental auxiliary variables]. (United States)

    Qin, Le-feng; Yang, Chao; Lin, Fen-fang; Yang, Ning; Zheng, Xin-yu; Xu, Hong-wei; Wang, Ke


    Taking topographic factors and NDVI as auxiliary variables, and by using regression-kriging method, the spatial variation pattern of soil fertility in Bashan tea garden in the hilly area of Fuyang City was explored. The spatial variability of the soil fertility was mainly attributed to the structural factors such as relative elevation and flat/vertical curvature. The lower the relative elevation, the worse the soil fertility was. The overall soil fertility level was relatively high, and the area with lower soil fertility only accounted for 5% of the total. By using regression-kriging method with relative elevation as auxiliary variable, the prediction accuracy of soil fertility was obviously higher than that by using ordinary kriging method, with the mean error and root mean square error being 0. 028 and 0. 108, respectively. It was suggested that the prediction method used in this paper could fully reflect the effects of environmental variables on soil fertility , improve the prediction accuracy about the spatial pattern of soil fertility, and provide scientific basis for the precise management of tea garden.

  19. Auxiliary liver organ formation by implantation of spleen-encapsulated hepatocytes. (United States)

    Nishio, Reiji; Nakayama, Miyuki; Ikekita, Masahiko; Watanabe, Yoshifumi


    Hepatocyte transplantation is an attractive alternative to orthotopic liver transplantation. However, its application has been limited because of its short-term success only. Here we report a new approach to hepatocyte transplantation resulting in the generation of an auxiliary liver in vivo. Isolated primary hepatocytes were encapsulated in isolated spleens and then transplanted by attaching the spleens to the livers of recipient animals (mice or rats) using biodegradable adhesive. A vascular network was rapidly established, and protein molecules circulated freely between the transplanted spleen and the liver, to which they adhered. In contrast, the spleen, which did not adhere to the liver or adhered elsewhere (adipose tissue or peritoneum), did not become vascularized but shrank and died. Encapsulation of hepatocytes in an isolated spleen enhanced their survival significantly, and co-encapsulation of Engelbreth- Holm-Swarm gel together with the hepatocytes further enhanced it. The encapsulated hepatocytes expressed liver-specific differentiation genes for more than 3 weeks. Plasma albumin concentrations in Nagase analbuminemic rats began to increase 3 days after transplantation. The transplanted hepatic cells migrated into the liver parenchyma, whereas the spleen was absorbed. Thus, we have developed a novel, simple approach for the rapid and efficient formation of functional auxiliary liver using a modified hepatocyte transplantation method.

  20. Auxiliary Gauge Mediation: A New Route to Mini-Split Supersymmetry

    CERN Document Server

    Kahn, Yonatan; Thaler, Jesse


    The discovery of a standard-model-like Higgs at 126 GeV and the absence of squark signals thus far at the LHC both point towards a mini-split spectrum for supersymmetry. Within standard paradigms, it is non-trivial to realize a mini-split spectrum with heavier sfermions but lighter gauginos while simultaneously generating Higgs sector soft terms of the correct magnitude, suggesting the need for new models of supersymmetry breaking and mediation. In this paper, we present a new approach to mini-split model building based on gauge mediation by "auxiliary groups", which are the anomaly-free continuous symmetries of the standard model in the limit of vanishing Yukawa couplings. In addition to the well-known flavor SU(3)_F and baryon-minus-lepton U(1)_{B-L} groups, we find that an additional U(1)_H acting on the Higgs doublets alone can be used to generate Higgs soft masses and B-terms necessary for a complete model of mini-split. Auxiliary gauge mediation is a special case of Higgsed gauge mediation, and we revie...

  1. Roles of HIV-1 auxiliary proteins in viral pathogenesis and host-pathogen interactions

    Institute of Scientific and Technical Information of China (English)

    Lin; LI; Hai; Shan; LI; C.David; PAUZA; Michael; BUKRINSKY; Richard; Y; ZHAO


    Active host-pathogen interactions take place during infection of human immunodeficiency virus type 1 (HIV-1).Outcomes of these interactions determine the efficiency of viral infection and subsequent disease progression. HIV-infected cells respond to viral invasion with various defensive strategies such as innate, cellular and humoral immune antiviral mechanisms. On the other hand, the virus has also developed various offensive tactics to suppress these host cellular responses. Among many of the viral offensive strategies, HIV- 1 viral auxiliary proteins (Tat, Rev, Nef, Vif, Vpr and Vpu) play important roles in the host-pathogen interaction and thus have significant impacts on the outcome of HIV infection. One of the best examples is the interaction of Vif with a host cytidine deaminase APOBEC3G. Although specific roles of other auxiliary proteins are not as well described as Vif-APOBEC3G interaction, it is the goal of this brief review to summarize some of the preliminary findings with the hope to stimulate further discussion and investigation in this exhilarating area of research.

  2. Voltage-gated calcium channels and their auxiliary subunits: physiology and pathophysiology and pharmacology. (United States)

    Dolphin, Annette C


    Voltage-gated calcium channels are essential players in many physiological processes in excitable cells. There are three main subdivisions of calcium channel, defined by the pore-forming α1 subunit, the CaV 1, CaV 2 and CaV 3 channels. For all the subtypes of voltage-gated calcium channel, their gating properties are key for the precise control of neurotransmitter release, muscle contraction and cell excitability, among many other processes. For the CaV 1 and CaV 2 channels, their ability to reach their required destinations in the cell membrane, their activation and the fine tuning of their biophysical properties are all dramatically influenced by the auxiliary subunits that associate with them. Furthermore, there are many diseases, both genetic and acquired, involving voltage-gated calcium channels. This review will provide a general introduction and then concentrate particularly on the role of auxiliary α2 δ subunits in both physiological and pathological processes involving calcium channels, and as a therapeutic target.

  3. The verb Hteti and the structure of auxiliary and modal verbs in Serbo-Croatian

    Directory of Open Access Journals (Sweden)

    Stanimir Rakić


    Full Text Available The analysis of the distribution of enclitic forms ću, ćeš, će ... and   heverb hteti shows that they cannot be naturally reduced to each other. Thi.s mean. s that the., verb hteti is not.. an auxiliary verb at all, i. e. it does not take part in compound tenses in S.erbo-Croatian. Accord,ing to their complement.& we ha­ve distinguished two verbs hteti - hteti1 and hteti. Hteti is a modal verb, hteti a main verb. Furthermore, we have shown that there is a parallelism between 'complements "da + prezent" and "sentence" which can be best accounted for by a transforma­ tion (18, which may be called in English Subjugation of Infi­ nitive. This analysis has enabled us to present the structure of auxiliary and modal verbs by rewrite rules (34. Finally, we have shown that an alternative analysis in which all verbs are conceived as main verbs is quite feasible. In this new analysis our results are preserved in the form of an obligatory filter.

  4. Current view on regulation of voltage-gated sodium channels by calcium and auxiliary proteins. (United States)

    Pitt, Geoffrey S; Lee, Seok-Yong


    In cardiac and skeletal myocytes, and in most neurons, the opening of voltage-gated Na(+) channels (NaV channels) triggers action potentials, a process that is regulated via the interactions of the channels' intercellular C-termini with auxiliary proteins and/or Ca(2+) . The molecular and structural details for how Ca(2+) and/or auxiliary proteins modulate NaV channel function, however, have eluded a concise mechanistic explanation and details have been shrouded for the last decade behind controversy about whether Ca(2+) acts directly upon the NaV channel or through interacting proteins, such as the Ca(2+) binding protein calmodulin (CaM). Here, we review recent advances in defining the structure of NaV intracellular C-termini and associated proteins such as CaM or fibroblast growth factor homologous factors (FHFs) to reveal new insights into how Ca(2+) affects NaV function, and how altered Ca(2+) -dependent or FHF-mediated regulation of NaV channels is perturbed in various disease states through mutations that disrupt CaM or FHF interaction.

  5. Investigation of the Start-up Strategy for a Solid Oxide Fuel Cell Based Auxiliary Power Unit under Transient Conditions

    Directory of Open Access Journals (Sweden)

    Michael R. von Spakovsky


    Full Text Available

    A typical approach to the synthesis/design optimization of energy systems is to only use steady state operation and high efficiency (or low total life cycle cost at full load as the basis for the synthesis/design. Transient operation as reflected by changes in power demand, shut-down, and start-up are left as secondary tasks to be solved by system and control engineers once the synthesis/design is fixed. However, start-up and shut-down may be events that happen quite often and, thus, may be quite important in the creative process of developing the system. This is especially true for small power units used in transportation applications or for domestic energy supplies, where the load demand changes frequently and peaks in load of short duration are common. The duration of start-up is, of course, a major factor which must be considered since rapid system response is an important factor in determining the feasibility of solid oxide fuel cell (SOFC based auxiliary power units (APUs. Start-up and shut-down may also significantly affect the life span of the system due to thermal stresses on all system components. Therefore, a proper balance must be struck between a fast response and the costs of owning and operating the system so that start-up or any other transient process can be accomplished in as short a time as possible yet with a minimum in fuel consumption.

    In this research work we have been studying the effects of control laws and strategies and transients on system performance. The results presented in this paper are based on a set of transient models developed and implemented for the components of a 5 kWe net power SOFC based APU and for the high-fidelity system which results from their integration. The simulation results given below are for two different start-up approaches: one with steam recirculation and component pre-heating and the second without either. These start-up simulations were performed for fixed values of a number of

  6. Smart SDHW systems

    DEFF Research Database (Denmark)

    Andersen, Elsa


    The aim of the project is to develop smart solar domestic hot water (SDHW) systems. A smart SDHW is a system in which the domestic water can bee heated both by solar collectors and by an auxiliary energy supply system. The auxiliary energy supply system heats up the hot-water tank from the top...... periods in a laboratory. Numeric models of the systems have been developed. The models are verified with measured temperatures and energy quantities. In order to verify the good test results in the laboratory two of the smart SDHW systems have been installed in practice. Measurements will bee carried out...

  7. Auxiliary Heating of Geothermally Preheated Water or CO2 - A Potential Solution for Low- to Moderate-Temperature Geothermal Resources (United States)

    Kong, X.; Garapati, N.; Adams, B. M.; Randolph, J.; Kuehn, T. H.; Saar, M. O.


    Typically, low- to moderate-temperature geothermal resources are more effectively used for direct heat energy applications. However, due to high thermal losses during transport, direct use requires that the heat resource is located near the user. Alternatively, we show here that if such a low-temperature geothermal resource is combined with an additional or secondary energy resource, the power production is increased compared to the sum from two separate (geothermal and secondary fuel) power plants (DiPippo et al. 1978) and the thermal losses are minimized because the thermal energy is utilized where it is produced. Since Adams et al. (2015) found that using CO2 as a subsurface working fluid produces more net power than brine at low- to moderate-temperature geothermal resource conditions, we compare over a range of parameters the net power and efficiencies of hybrid geothermal power plants that use brine or CO2 as the subsurface working fluid, that are then heated further with a secondary energy source that is unspecified here. Parameters varied include the subsurface working fluid (brine vs. CO2), geothermal reservoir depth (2.5-4.5 km), and turbine inlet temperature (200-600°C) after auxiliary heating. The hybrid power plant is numerically modeled using an iterative coupling approach of TOUGH2-ECO2N/ECO2H (Pruess, 2004) for simulation of the subsurface reservoir and Engineering Equation Solver for well bore fluid flow and surface power plant performance. We find that hybrid power plants that are CO2-based (subsurface) systems have higher thermal efficiencies than the brine based systems at low turbine inlet temperatures. Specifically, our results indicate that geothermal hybrid plants that are CO2-based are more efficient than brine-based systems when the contribution of the geothermal resource energy is higher than 48%.

  8. [The voluntary health auxiliary. Application to the Peruvian Altiplano of new concepts of primary health care in disadvantaged communities]. (United States)

    Gachoud, P


    A group a Swiss physicians, who have been working for about eight years in rural health posts of the Peruvian highlands (Altiplano), engaged in training voluntary health auxiliaries, chosen by the indigenous communities. Experience has shown that, as in other countries, it is thus possible to markedly improve the health of populations which badly lack resources. The efficacy of using such auxiliaries was recognized by the Peruvian Ministry of Health, which has now set up a programme for their training and supervision. Within the concept of primary health care, based on the participation of people to the management of their health, the voluntary health auxiliary is placed in a strategic and decisive position for the success of an enterprise which is now spreading to many countries of the Third World.

  9. Application of High Voltage Frequency Converter in the auxiliary shaft hoist%高压变频器在煤矿提升机上的应用

    Institute of Scientific and Technical Information of China (English)

    陶长青; 翟洪亮; 刘丽英; 张红岩


    田陈煤矿副井提升机负责全矿的人员和物料的提升,原电控系统采用的是交流提升机电控系统,采用串电阻调速方式,故障率高,耗电量大,且对工作人员的工作环境产生不利的影响。田陈煤矿通过对副井绞车电控系统改造,使绞车的电控系统使用高压变频装置,绞车拥有转速启动功能,实现电机在旋转中再启动,且有充足的过载能力,工作可靠、安全,低速爬行平稳,转速精度高,加速曲线直、不抖动,减速能量回馈,较好的节电效果。%Tian Chen coal mine auxiliary shaft hoist is responsible for al personnel and materials to enhance the original electronic control system uses AC hoist control system, using the series resistance speed control mode, failure rate, power consumption, and work staff adversely affect the environment. Tian Chen through the auxiliary shaft mine winch electric control system, so that the winch system uses high frequency electronic control gear, winches have speed start function, the motor in the rotation and then start, and there is plenty of overload, reliable, safe, slow speed steady speed, high precision, acceleration curve straight, do not shake, slow energy feedback, better energy-saving effect.

  10. The Central Logic Board and its auxiliary boards for the optical module of the KM3NeT detector

    CERN Document Server

    Biagi, S


    The KM3NeT neutrino telescope will be composed of many optical modules, each of them containing 31 (3") photomultipliers, connected to a Central Logic Board. The Central Logic Board integrates Time to Digital Converters that measure Time Over Threshold of the photomulti- pliers signals while White Rabbit is used for the optical modules time synchronization. Auxiliary boards have also been designed and built in order to test and extend the performance of the Cen- tral Logic Board. The Central Logic Board, as well as the auxiliary boards, will be presented by focusing on the design consideration, prototyping issues and tests.

  11. Optimizing selection of training and auxiliary data for operational land cover classification for the LCMAP initiative (United States)

    Zhu, Zhe; Gallant, Alisa L.; Woodcock, Curtis E.; Pengra, Bruce; Olofsson, Pontus; Loveland, Thomas R.; Jin, Suming; Dahal, Devendra; Yang, Limin; Auch, Roger F.


    The U.S. Geological Survey's Land Change Monitoring, Assessment, and Projection (LCMAP) initiative is a new end-to-end capability to continuously track and characterize changes in land cover, use, and condition to better support research and applications relevant to resource management and environmental change. Among the LCMAP product suite are annual land cover maps that will be available to the public. This paper describes an approach to optimize the selection of training and auxiliary data for deriving the thematic land cover maps based on all available clear observations from Landsats 4-8. Training data were selected from map products of the U.S. Geological Survey's Land Cover Trends project. The Random Forest classifier was applied for different classification scenarios based on the Continuous Change Detection and Classification (CCDC) algorithm. We found that extracting training data proportionally to the occurrence of land cover classes was superior to an equal distribution of training data per class, and suggest using a total of 20,000 training pixels to classify an area about the size of a Landsat scene. The problem of unbalanced training data was alleviated by extracting a minimum of 600 training pixels and a maximum of 8000 training pixels per class. We additionally explored removing outliers contained within the training data based on their spectral and spatial criteria, but observed no significant improvement in classification results. We also tested the importance of different types of auxiliary data that were available for the conterminous United States, including: (a) five variables used by the National Land Cover Database, (b) three variables from the cloud screening "Function of mask" (Fmask) statistics, and (c) two variables from the change detection results of CCDC. We found that auxiliary variables such as a Digital Elevation Model and its derivatives (aspect, position index, and slope), potential wetland index, water probability, snow

  12. Heterotopic auxiliary rat liver transplantation with flow-regulated portal vein arterialization in acute hepatic failure. (United States)

    Schleimer, Karina; Kalder, Johannes; Grommes, Jochen; Jalaie, Houman; Tawadros, Samir; Greiner, Andreas; Jacobs, Michael; Kokozidou, Maria


    In acute hepatic failure auxiliary liver transplantation is an interesting alternative approach. The aim is to provide a temporary support until the failing native liver has regenerated.(1-3) The APOLT-method, the orthotopic implantation of auxiliary segments- averts most of the technical problems. However this method necessitates extensive resections of both the native liver and the graft.(4) In 1998, Erhard developed the heterotopic auxiliary liver transplantation (HALT) utilizing portal vein arterialization (PVA) (Figure 1). This technique showed promising initial clinical results.(5-6) We developed a HALT-technique with flow-regulated PVA in the rat to examine the influence of flow-regulated PVA on graft morphology and function (Figure 2). A liver graft reduced to 30 % of its original size, was heterotopically implanted in the right renal region of the recipient after explantation of the right kidney.  The infra-hepatic caval vein of the graft was anastomosed with the infrahepatic caval vein of the recipient. The arterialization of the donor's portal vein was carried out via the recipient's right renal artery with the stent technique. The blood-flow regulation of the arterialized portal vein was achieved with the use of a stent with an internal diameter of 0.3 mm. The celiac trunk of the graft was end-to-side anastomosed with the recipient's aorta and the bile duct was implanted into the duodenum. A subtotal resection of the native liver was performed to induce acute hepatic failure. (7) In this manner 112 transplantations were performed. The perioperative survival rate was 90% and the 6-week survival rate was 80%. Six weeks after operation, the native liver regenerated, showing an increase in weight from 2.3±0.8 g to 9.8±1 g. At this time, the graft's weight decreased from 3.3±0.8 g to 2.3±0.8 g. We were able to obtain promising long-term results in terms of graft morphology and function. HALT with flow-regulated PVA reliably bridges acute hepatic failure

  13. Application of Pickling Auxiliary%浸酸助剂的应用

    Institute of Scientific and Technical Information of China (English)

    易杰; 陈慧; 单志华


    Mixed aromatic sulfoacid was made as pickling auxiliary, which was used as low salt pickling for cattle. The condition of pickled pelt and the pelt tanned by Cr2O3 was tested.The results show that, the pelt condition pickled by 3% salt and 2% pickling auxiliary or SELLATAN P is the same as the pelt pickled by conventional processes. All of the pickled pelt are tanned by 5% chromium powder(about 1.05% Cr2O3), the pickled pelt made by pickling auxiliary could absorb 90.97% Cr2O3, and the distribution of Cr2O3 in leather is similiar to that of leather made in conventional processes. The Ts of the leather is 114.34℃, the tendencies of drying and conditioning are the same.%将混和芳香族磺酸作为浸酸助剂,用于黄牛软化裸皮低盐浸酸,考察酸皮状态及其铬鞣后的基本特征。结果表明:浸酸过程(液比为0.8)中加3%的盐、2%自制浸酸助剂;或者浸酸过程(液比为0.8)中加3%的盐、2%浸酸助剂塞拉坦P,浸酸后的皮坯与常规工艺浸酸皮坯状态相似;使用5%的铬粉(约为1.05%Cr2O3)将浸酸皮坯鞣制,测得由自制浸酸助剂制备的皮坯对Cr2O3吸收率为90.97%;坯革中Cr2O3分布与常规工艺制备的坯革相似;无过鞣、色花现象;坯革收缩温度为114.34℃;坯革的干燥及回湿趋势与常规工艺制备的坯革相似。

  14. Bombyx mori P-element Somatic Inhibitor (BmPSI) Is a Key Auxiliary Factor for Silkworm Male Sex Determination (United States)

    Chen, Shuqing; Zeng, Baosheng; James, Anthony A.; Tan, Anjiang; Huang, Yongping


    Manipulation of sex determination pathways in insects provides the basis for a wide spectrum of strategies to benefit agriculture and public health. Furthermore, insects display a remarkable diversity in the genetic pathways that lead to sex differentiation. The silkworm, Bombyx mori, has been cultivated by humans as a beneficial insect for over two millennia, and more recently as a model system for studying lepidopteran genetics and development. Previous studies have identified the B. mori Fem piRNA as the primary female determining factor and BmMasc as its downstream target, while the genetic scenario for male sex determination was still unclear. In the current study, we exploite the transgenic CRISPR/Cas9 system to generate a comprehensive set of knockout mutations in genes BmSxl, Bmtra2, BmImp, BmImpM, BmPSI and BmMasc, to investigate their roles in silkworm sex determination. Absence of Bmtra2 results in the complete depletion of Bmdsx transcripts, which is the conserved downstream factor in the sex determination pathway, and induces embryonic lethality. Loss of BmImp or BmImpM function does not affect the sexual differentiation. Mutations in BmPSI and BmMasc genes affect the splicing of Bmdsx and the female reproductive apparatus appeared in the male external genital. Intriguingly, we identify that BmPSI regulates expression of BmMasc, BmImpM and Bmdsx, supporting the conclusion that it acts as a key auxiliary factor in silkworm male sex determination. PMID:28103247

  15. Progress in Application of Saliva Auxiliary Diagnosis%唾液辅助诊断的应用进展

    Institute of Scientific and Technical Information of China (English)



    唾液中的很多成分,包括局部衍生的和系统来源的介质,均可作为诊断疾病、评价治疗效果的敏感指标,在诊断中有潜在的应用价值.此外,唾液的检测操作简单且对患者无损伤,可作为诊断许多疾病的辅助工具.影响唾液成分改变的疾病很多,但将唾液成分的检测真正应用于疾病的诊断还不多见.因此,检测唾液成分并研究唾液成分的改变可以为某些口腔局部和系统性疾病的诊断提供新思路.%Many of the components of saliva,including partial derivative and system sourced medium,can be sensitive indexes in diagnosing disease and evaluating the efficacy of the treatment.These components have potential application values in diagnosis.In addition,the detection of saliva is easy and has no damage to the patient,and it can be used as an auxiliary tool for many diseases diagnosis.A lot of disease could influence the component changes of saliva; however,the application of saliva composition detection on disease diagnosis is seldomly seen.So,the detection of saliva components and the study of the changes of these components could provide a new approach to diagnose some oral and systemic disease.

  16. French wind generator systems. [as auxiliary power sources for electrical networks (United States)

    Noel, J. M.


    The experimental design of a wind driven generator with a rated power of 800 kilovolt amperes and capable of being connected to the main electrical network is reported. The rotor is a three bladed propeller; each blade is twisted but the fixed pitch is adjustable. The asynchronous 800-kilovolt ampere generator is driven by the propeller through a gearbox. A dissipating resistor regulates the machine under no-load conditions. The first propeller on the machine lasted 18 months; replacement of the rigid propeller with a flexible structure resulted in breakdown due to flutter effects.

  17. Comparative Analysis of Potential Auxiliary Icebreaking Devices/Systems for Great Lakes. Volume I. (United States)


    Icebreaking, Report No. 1978, Maritime Administration, U.S. Department of Commerce , July 1978. Deslauriers, P.C. and Lewis, J.W., Model Evaluation of the...Engineers and Constructors, 1975. * Dickins, D., Air Cushion Vehicle Ice Breaking Canadian Coast Guard Hovercraft Voyageur , Test Report, Ministry of

  18. Organics and nitrogen removal from textile auxiliaries wastewater with A{sup 2}O-MBR in a pilot-scale

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Faqian [Institute of Environmental Science and Technology, Zhejiang University, Hangzhou 310058 (China); Sun, Bin [Institute of Environmental Science and Technology, Zhejiang University, Hangzhou 310058 (China); Shanghai Electric Group Co. Ltd. Central Academe, Shanghai 200070 (China); Hu, Jian; He, Yangyang [Institute of Environmental Science and Technology, Zhejiang University, Hangzhou 310058 (China); Wu, Weixiang, E-mail: [Institute of Environmental Science and Technology, Zhejiang University, Hangzhou 310058 (China)


    Highlights: • A pilot-scale A{sup 2}O-MBR system treating textile auxiliaries wastewater was assessed. • Organic matter and recycle ratio strongly affected the performance of the system. • GC/MS analysis found some refractory organics in the MBR permeate. • Combination of organic foulants and inorganic compounds caused membrane fouling. - Abstract: The removal of organic compounds and nitrogen in an anaerobic–anoxic–aerobic membrane bioreactor process (A{sup 2}O-MBR) for treatment of textile auxiliaries (TA) wastewater was investigated. The results show that the average effluent concentrations of chemical oxygen demand (COD), ammonium nitrogen (NH{sub 4}{sup +}–N) and total nitrogen (TN) were about 119, 3 and 48 mg/L under an internal recycle ratio of 1.5. The average removal efficiency of COD, NH{sub 4}{sup +}–N and TN were 87%, 96% and 55%, respectively. Gas chromatograph–mass spectrometer analysis indicated that, although as much as 121 different types of organic compounds were present in the TA wastewater, only 20 kinds of refractory organic compounds were found in the MBR effluent, which could be used as indicators of effluents from this kind of industrial wastewater. Scanning electron microscopy analysis revealed that bacterial foulants were significant contributors to membrane fouling. An examination of foulants components by wavelength dispersive X-ray fluorescence showed that the combination of organic foulants and inorganic compounds enhanced the formation of gel layer and thus caused membrane fouling. The results will provide valuable information for optimizing the design and operation of wastewater treatment system in the textile industry.

  19. A general purpose diagnostic technique for marine diesel engines - Application on the main propulsion and auxiliary diesel units of a marine vessel

    Energy Technology Data Exchange (ETDEWEB)

    Lamaris, V.T., E-mail: lamaris@central.ntua.g [Internal Combustion Engines Laboratory, Thermal Engineering Department, School of Mechanical Engineering, National Technical University of Athens, 9 Heroon Polytechniou St., Zografou Campus, 15780 Athens (Greece); Hountalas, D.T. [Internal Combustion Engines Laboratory, Thermal Engineering Department, School of Mechanical Engineering, National Technical University of Athens, 9 Heroon Polytechniou St., Zografou Campus, 15780 Athens (Greece)


    Diesel engines are widely used in marine applications (i.e. propulsion and auxiliaries) except from a few cases where gas or steam turbines are used. This is the result of their high efficiency, power concentration and reliability compared to other compatible or alternative power sources. The proper and efficient operation of the engines (main engine and diesel generator units) in marine applications is critical, and therefore techniques or systems that determine engine current condition and detect potential faults are extremely important. Furthermore, it is advantageous when such techniques can be applied on different engine configurations and provide reliable results, because on a vessel usually exist diesel engines of different type, i.e. the main propulsion unit is a large low-speed two-stroke diesel engine while the diesel generators are four-stroke medium or high speed engines. In the present work is described and evaluated for the first time the application of an improved diagnostic technique, developed by the authors, on both the main engine and the auxiliary units of a commercial marine vessel. The diagnostic technique is based on a thermodynamic simulation model. The simulation model embedded in the technique has been modified, namely an existing two-zone model is replaced by a multi-zone one. With this modification it is avoided model constant tuning with the operating conditions. This is extremely important for the diagnostic philosophy of the proposed technique. Using data from engine shop tests, the simulation model is calibrated (i.e. model constants are determined) and the engine reference condition is obtained. The simulation model is then used to estimate the current engine condition, using field measurements (i.e. cylinder pressure measurements, periphery data, etc.). From the results it is revealed that the diagnosis method provides detailed information for the operating condition of both engines and the values of parameters that cannot be

  20. Increasing LIGO sensitivity by feedforward subtraction of auxiliary length control noise

    CERN Document Server

    Meadors, Grant David; Riles, Keith


    LIGO, the Laser Interferometer Gravitational-wave Observatory, has been designed and constructed to measure gravitational wave strain via differential arm length. The LIGO 4-km Michelson arms with Fabry-Perot cavities have auxiliary length control servos for suppressing Michelson motion of the beam-splitter and arm cavity input mirrors, which degrades interferometer sensitivity. We demonstrate how a post-facto pipeline called AMPS improves a data sample from LIGO Science Run~6 with feedforward subtraction. Dividing data into 1024-second windows, AMPS numerically fits filter functions representing the frequency-domain transfer functions from Michelson length channels into the gravitational-wave strain data channel for each window, then subtracts the filtered Michelson channel noise (witness) from the strain channel (target). In this paper we describe the algorithm, assess achievable improvements in sensitivity to astrophysical sources, and consider relevance to future interferometry.

  1. 印染助剂中的环境激素%Environmental hormone in textile auxiliary

    Institute of Scientific and Technical Information of China (English)

    张海婴; 赵婷; 袁碧云; 李蔚文


    Problem of environmental hormone is another global environmental problem that cannot be ignored besides the depletion of ozone layer and greenhouse effect. The classification, characteristics, action mechanism and harms of hormone to environment were introduced, and environmental hormone problem caused by textile auxiliary and the related analysis methods were emphatically discussed.%环境激素问题是继臭氧层破坏和温室效应之后又一大不可忽视的世界环境问题。介绍了环境激素的种类、特点、作用机理、危害,重点介绍了纺织染整助剂中的环境激素问题及其检测技术。

  2. Analytical solution of population balance equation involving aggregation and breakage in terms of auxiliary equation method

    Indian Academy of Sciences (India)

    Zehra Pinar; Abhishek Dutta; Guido Bény; Turgut Öziş


    This paper presents an effective analytical simulation to solve population balance equation (PBE), involving particulate aggregation and breakage, by making use of appropriate solution(s) of associated complementary equation via auxiliary equation method (AEM). Travelling wave solutions of the complementary equation of a nonlinear PBE with appropriately chosen parameters is taken to be analogous to the description of the dynamic behaviour of the particulate processes. For an initial proof-of-concept, a general case when the number of particles varies with respect to time is chosen. Three cases, i.e. (1) balanced aggregation and breakage, (2) when aggregation can dominate and (3) breakage can dominate, are selected and solved for their corresponding analytical solutions. The results are then compared with the available analytical solution, based on Laplace transform obtained from literature. In this communication, it is shown that the solution approach proposed via AEM is flexible and therefore more efficient than the analytical approach used in the literature.

  3. Frozen-orbital and downfolding calculations with auxiliary-field quantum Monte Carlo

    CERN Document Server

    Purwanto, Wirawan; Krakauer, Henry


    We describe the implementation of the frozen-orbital and downfolding approximations in the auxiliary-field quantum Monte Carlo (AFQMC) method. These approaches can provide significant computational savings compared to fully correlating all the electrons. While the many-body wave function is never explicit in AFQMC, its random walkers are Slater determinants, whose orbitals may be expressed in terms of any one-particle orbital basis. It is therefore straightforward to partition the full N-particle Hilbert space into active and inactive parts to implement the frozen-orbital method. In the frozen-core approximation, for example, the core electrons can be eliminated in the correlated part of the calculations, greatly increasing the computational efficiency, especially for heavy atoms. Scalar relativistic effects are easily included using the Douglas-Kroll-Hess theory. Using this method, we obtain a way to effectively eliminate the error due to single-projector, norm-conserving pseudopotentials in AFQMC. We also i...

  4. First use of LHC Run 3 Conditions Database infrastructure for auxiliary data files in ATLAS

    CERN Document Server

    Formica, Andrea; The ATLAS collaboration; Gallas, Elizabeth; Rybkin, Grigori


    Processing of the large amount of data produced by the ATLAS experiment requires fast and reliable access to what we call Auxiliary Data Files (ADF). These files, produced by Combined Performance, Trigger and Physics groups, contain conditions, calibrations, and other derived data used by the ATLAS software. In ATLAS this data has, thus far for historical reasons, been collected and accessed outside the ATLAS Conditions Database infrastructure and related software. For this reason, along with the fact that ADF are effectively read by the software as binary objects, this class of data appears ideal for testing the proposed Run 3 Conditions data infrastructure now in development. This paper will describe this implementation as well as the lessons learned in exploring and refining the new infrastructure with the potential for deployment during Run 2.

  5. LRP2, an auxiliary receptor that controls sonic hedgehog signaling in development and disease. (United States)

    Christ, Annabel; Herzog, Katja; Willnow, Thomas E


    To fulfill their multiple roles in organ development and adult tissue homeostasis, hedgehog (HH) morphogens act through their receptor Patched (PTCH) on target cells. However, HH actions also require HH binding proteins, auxiliary cell surface receptors that agonize or antagonize morphogen signaling in a context-dependent manner. Here, we discuss recent findings on the LDL receptor-related protein 2 (LRP2), an exemplary HH binding protein that modulates sonic hedgehog activities in stem and progenitor cell niches in embryonic and adult tissues. LRP2 functions are crucial for developmental processes in a number of tissues, including the brain, the eye, and the heart, and defects in this receptor pathway are the cause of devastating congenital diseases in humans. Developmental Dynamics 245:569-579, 2016. © 2016 Wiley Periodicals, Inc.

  6. Sine-Gordon solitons, auxiliary fields and singular limit of a double pendulums chain

    Energy Technology Data Exchange (ETDEWEB)

    Cadoni, Mariano [Dipartimento di Fisica, Universita di Cagliari and I.N.F.N., Sezione di Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Leo, Roberto De [Dipartimento di Fisica, Universita di Cagliari and I.N.F.N., Sezione di Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Gaeta, Giuseppe [Dipartimento di Matematica, Universita di Milano, via Saldini 50, 20133 Milano (Italy)


    We consider the continuum version of an elastic chain supporting topological and non-topological degrees of freedom; this generalizes a model for the dynamics of DNA recently proposed and investigated by ourselves. In a certain limit, the non-topological degrees of freedom are frozen, and the model reduces to the sine-Gordon equations and thus supports well-known topological soliton solutions. We consider a (singular) perturbative expansion around this limit and study in particular how the non-topological field assumes the role of an auxiliary field. This provides a more general framework for the slaving of this degree of freedom on the topological one, already observed elsewhere in the context of the mentioned DNA model; in this framework one expects such a phenomenon to arise in a quite large class of field-theoretical models.

  7. Carbohydrate-auxiliary assisted preparation of enantiopure 1,2-oxazine derivatives and aminopolyols

    Directory of Open Access Journals (Sweden)

    Marcin Jasiński


    Full Text Available An approach to enantiopure hydroxylated 2H-1,2-oxazine derivatives is presented utilizing the [3 + 3] cyclisation of lithiated alkoxyallenes and an L-erythrose-derived N-glycosyl nitrone as precursors. This key step proceeded only with moderate diastereoselectivity, but allowed entry into both enantiomeric series of the resulting 3,6-dihydro-2H-1,2-oxazines. Their enol ether double bond was then subjected to a hydroboration followed by an oxidative work-up, and finally the auxiliary was removed. The described three-step procedure enabled the synthesis of enantiopure hydroxylated 1,2-oxazines. Typical examples were treated with samarium diiodide leading to enantiopure acyclic aminopolyols. We also report on our attempts to convert these compounds into enantiopure hydroxylated pyrrolidine derivatives.

  8. Auxiliary-Field Quantum Monte Carlo Simulations of Strongly-Correlated Molecules and Solids

    Energy Technology Data Exchange (ETDEWEB)

    Chang, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morales, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)


    We propose a method of implementing projected wave functions for second-quantized auxiliary- field quantum Monte Carlo (AFQMC) techniques. The method is based on expressing the two-body projector as one-body terms coupled to binary Ising fields. To benchmark the method, we choose to study the two-dimensional (2D) one-band Hubbard model with repulsive interactions using the constrained-path MC (CPMC). The CPMC uses a trial wave function to guide the random walks so that the so-called fermion sign problem can be eliminated. The trial wave function also serves as the importance function in Monte Carlo sampling. AS such, the quality of the trial wave function has a direct impact to the efficiency and accuracy of the simulations.

  9. Skin color modeling using the radiative transfer equation solved by the auxiliary function method. (United States)

    Magnain, Caroline; Elias, Mady; Frigerio, Jean-Marc


    The auxiliary function method is an efficient technique for solving the radiative tranfer equation without adding any assumption and was applied until now only for theoretical stratified media. The first application (to our knowledge) of the method to a real case, the human skin, is presented. This makes it possible to validate the method by comparing model results with experimental reflectance spectra of real skin. An excellent agreement is obtained for a multilayer model of the skin made of 22 sublayers and taking into account the anisotropic phase function of the scatterers. Thus there is the opportunity to develop interest in such models by quantitatively evaluating the influence of the parameters commonly used in the literature that modify skin color, such as the concentration of the scatterers and the thickness of each sublayer.

  10. GOTHIC Simulation of APR1400 Auxiliary Charging Pump room heat up

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Hui-Un; Heo, Sun [KHNP, Daejeon (Korea, Republic of)


    As a part of the Advanced Power Reactor 1400 (APR1400) U. S. Nuclear Regulatory Commission Design Certification (NRC DC) project, we have been investigating Auxiliary Charging Pump (ACP) room heat up. With reference to the design specification of the ACP room, we determined input information and developed a GOTHIC model of the APR1400 ACP room. This calculation model is described herein, and representative results from the calculation are presented as well. The results of the present paper are used to determine the integrity of ACP operating in the accident. APR 1400 GOTHIC model was developed for ACP room heat up calculation. Calculation results confirm that door opening is cooling the room properly. It is found that the difference due to the surface option of heat conductors is insignificant. Based on this result, further studies should be performed to confirm integrity of ACP.

  11. The sigma receptor as a ligand-regulated auxiliary potassium channel subunit. (United States)

    Aydar, Ebru; Palmer, Christopher P; Klyachko, Vitaly A; Jackson, Meyer B


    The sigma receptor is a novel protein that mediates the modulation of ion channels by psychotropic drugs through a unique transduction mechanism depending neither on G proteins nor protein phosphorylation. The present study investigated sigma receptor signal transduction by reconstituting responses in Xenopus oocytes. Sigma receptors modulated voltage-gated K+ channels (Kv1.4 or Kv1.5) in different ways in the presence and absence of ligands. Association between Kv1.4 channels and sigma receptors was demonstrated by coimmunoprecipitation. These results indicate a novel mechanism of signal transduction dependent on protein-protein interactions. Domain accessibility experiments suggested a structure for the sigma receptor with two cytoplasmic termini and two membrane-spanning segments. The ligand-independent effects on channels suggest that sigma receptors serve as auxiliary subunits to voltage-gated K+ channels with distinct functional interactions, depending on the presence or absence of ligand.

  12. First Use of LHC Run 3 Conditions Database Infrastructure for Auxiliary Data Files in ATLAS

    CERN Document Server

    Aperio Bella, Ludovica; The ATLAS collaboration


    Processing of the large amount of data produced by the ATLAS experiment requires fast and reliable access to what we call Auxiliary Data Files (ADF). These files, produced by Combined Performance, Trigger and Physics groups, contain conditions, calibrations, and other derived data used by the ATLAS software. In ATLAS this data has, thus far for historical reasons, been collected and accessed outside the ATLAS Conditions Database infrastructure and related software. For this reason, along with the fact that ADF data is effectively read by the software as binary objects, makes this class of data ideal for testing the proposed Run 3 Conditions data infrastructure now in development. This paper will describe this implementation as well as describe the lessons learned in exploring and refining the new infrastructure with the potential for deployment during Run 2.

  13. Improved Estimation of Population Mean Using Median and Coefficient of Variation of Auxiliary Variable

    Directory of Open Access Journals (Sweden)

    Subhash Kumar Yadav,


    Full Text Available This manuscript deals with the estimation of population mean of the variable under study using an improved ratio type estimator utilizing the known values of median and coefficient of variation of auxiliary variable. The expressions for the bias and mean square error (MSE of the proposed estimator are obtained up to the first order of approximation. The optimum estimator is also obtained for the optimum value of the constant of the estimator and its optimum properties are also studied. It is shown that the proposed estimator is better than the existing ratio estimators in the literature. For the justification of the improvement of the proposed estimator over others, an empirical study is also carried out.

  14. Auxiliary diagnostic value of monocyte chemoattractant protein-1 of whole blood in active tuberculosis. (United States)

    Wang, Ying; Li, Hang; Bao, Hong; Jin, Yufen; Liu, Xiaoju; Wu, Xueqiong; Yu, Ting


    The aim of this study was to study the expression level of interferon-γ (IFN-γ) and monocyte chemoattractant protein-1 (MCP-1) in peripheral blood and its auxiliary diagnostic value in active tuberculosis. A chemiluminescence enzyme immunoassay method was used to detect the levels of IFN-γ and MCP-1 in peripheral blood. Then the receiver operating characteristic curve were drawn to determine the threshold of IFN-γ and MCP-1 for diagnosis of active tuberculosis and to evaluate their diagnostic performance. The specific IFN-γ and MCP-1 levels in the active tuberculosis group were significantly higher than those in the non-tuberculous pulmonary disease group (P 0.05), but the MCP-1 levels in the non-tuberculous respiratory disease group were significantly higher than those of the healthy control group (P < 0.05). The specific IFN-γ and MCP-1 level cut off values were 256 pg/ml and 389 pg/ml as an active tuberculosis diagnostic standard. The sensitivities of IFN-γ and MCP-1 were 57.3% and 92.8%, respectively; specificities were 80% and 80.7%, respectively; the positive predictive values were 76.9% and 84.9%, respectively; negative predictive values were 61.7% and 78.7%, respectively; and accuracy rates were 76.9% and 84.9%, respectively. Compared with the detection of IFN-γ, we observed a better diagnostic performance of MCP-1 in peripheral blood in active tuberculosis. MCP-1 may become one of the active tuberculosis auxiliary diagnostic targets.

  15. A Highly Efficient Gene Expression Programming (GEP Model for Auxiliary Diagnosis of Small Cell Lung Cancer.

    Directory of Open Access Journals (Sweden)

    Zhuang Yu

    Full Text Available Lung cancer is an important and common cancer that constitutes a major public health problem, but early detection of small cell lung cancer can significantly improve the survival rate of cancer patients. A number of serum biomarkers have been used in the diagnosis of lung cancers; however, they exhibit low sensitivity and specificity.We used biochemical methods to measure blood levels of lactate dehydrogenase (LDH, C-reactive protein (CRP, Na+, Cl-, carcino-embryonic antigen (CEA, and neuron specific enolase (NSE in 145 small cell lung cancer (SCLC patients and 155 non-small cell lung cancer and 155 normal controls. A gene expression programming (GEP model and Receiver Operating Characteristic (ROC curves incorporating these biomarkers was developed for the auxiliary diagnosis of SCLC.After appropriate modification of the parameters, the GEP model was initially set up based on a training set of 115 SCLC patients and 125 normal controls for GEP model generation. Then the GEP was applied to the remaining 60 subjects (the test set for model validation. GEP successfully discriminated 281 out of 300 cases, showing a correct classification rate for lung cancer patients of 93.75% (225/240 and 93.33% (56/60 for the training and test sets, respectively. Another GEP model incorporating four biomarkers, including CEA, NSE, LDH, and CRP, exhibited slightly lower detection sensitivity than the GEP model, including six biomarkers. We repeat the models on artificial neural network (ANN, and our results showed that the accuracy of GEP models were higher than that in ANN. GEP model incorporating six serum biomarkers performed by NSCLC patients and normal controls showed low accuracy than SCLC patients and was enough to prove that the GEP model is suitable for the SCLC patients.We have developed a GEP model with high sensitivity and specificity for the auxiliary diagnosis of SCLC. This GEP model has the potential for the wide use for detection of SCLC in less

  16. Investigations of repetition rate stability of a mode-locked quantum dot semiconductor laser in an auxiliary optical fiber cavity

    DEFF Research Database (Denmark)

    Breuer, Stefan; Elsässer, Wolfgang; McInerney, J.G.


    We have investigated experimentally the pulse train (mode beating) stability of a monolithic mode-locked multi-section quantum-dot laser with an added passive auxiliary optical fiber cavity. Addition of the weakly coupled (¿ -24dB) cavity reduces the current-induced shift d¿/dI of the principal...

  17. Application of the Method of Auxiliary Sources for the Analysis of Plane-Wave Scattering by Impedance Spheres

    DEFF Research Database (Denmark)

    Karamehmedovic, Mirza; Breinbjerg, Olav


    The Method of Auxiliary Sources (MAS) is applied to 3D scattering problems involving spherical impedance scatterers. The MAS results are compared with the reference spherical wave expansion (SWE) solution. It is demonstrated that good agreement is achieved between the MAS and SWE results....

  18. The Women's Army Auxiliary Corps: A Compromise to Overcome the Conflict of Women Serving in the Army (United States)

    Permeswaran, Yashila


    Though people now take the idea of women in the military for granted, in the 1940s it was a vigorously debated suggestion. Men protected their country; women stayed at home. Because of the conflict over whether women should serve in the army, Congress compromised by creating the Women's Army Auxiliary Corps (WAAC). This article describes the…

  19. 基于胸鳍辅助推进的仿生机器鱼%Biomimetic Robotic Fish Based on Pectoral Fins Auxiliary Propulsion

    Institute of Scientific and Technical Information of China (English)

    王梅娟; 王楠; 瞿逸洲; 韦典成


    为提高仿生机器鱼游动的机动性能并完善传统尾鳍推进模式,设计一种基于胸鳍辅助推进的仿生机器鱼。将胸鳍与尾鳍推进模式相结合,采用正弦信号对仿生机器鱼的尾鳍进行控制,通过胸鳍来调整鱼体方向,从而实现上升及下降的动力提供。对机器鱼整体、主控系统、执行模块和通信模块进行设计,并通过实验验证。实验结果表明:该仿生机器鱼能够更灵活、更精确地实现浅水中前进、上升下潜以及盘旋、回转和制动,并通过人机交互对仿生鱼进行控制,结合其自主避障、图像传输等辅助功能,实现对海洋环境的实时监测。%For improving biomimetic robotic fish swimming flexibility and traditional tail fin propulsion, design biomimetic robotic fish based on pectoral fins auxiliary propulsion. Combine pectoral fins auxiliary propulsion mode with tail fin propulsion, use sine signal to control tail of biomimetic robotic fish, change fish swimming direction by pectoral fins, then realize power supply of ascending and descending. Design biomimetic robotic fish, main control system, execution module and communication module, verify it by test. The test results show: the biomimetic robotic fish can be more flexible and precise to realize advancing in shallow water, floating, diving circle flight, rotating and braking, then control fish by human-computer interaction, realize real time monitoring on ocean environment by combining auxiliary functions such as autonomous obstacle negotiation function, and image transmission.

  20. Rapid bonding enhancement by auxiliary ultrasonic actuation for the fabrication of cyclic olefin copolymer (COC) microfluidic devices (United States)

    Yu, H.; Tor, S. B.; Loh, N. H.


    Thermal compression bonding is a straightforward, inexpensive and widely used method for enclosing open microchannels in thermoplastic microfluidic devices. It is advantageous over adhesive, solvent and grafting bonding methods in retaining material homogeneity. However, the trade-off between high bond strength and low microchannel deformation is always a crucial consideration in thermal compression bonding. In this study, an effective method for improving bond strength while retaining the microchannel integrity with negligible distortion is proposed and analyzed. Longitudinal ultrasonic actuation was applied to the preheated cyclic olefin copolymer (COC) substrates to achieve accelerated and enhanced bonding with an ultrasonic welding system. Intimate contact between the bonding surfaces before the ultrasonic actuation was found to be an important prior condition. With improper contact, several bonding defects would occur, such as voids, localized spot melting and edge melting. Under auxiliary ultrasonic vibration, within 10 s, the bond strength developed at the bonding interface could be dramatically improved compared with those achieved without ultrasonic actuation. The enhanced bond strength obtained at a preheating temperature of 20 °C lower than its Tg could be comparable to the strength for pure thermal compression at 5 °C higher than its Tg. It is believed that the ultrasonic energy introduced could elevate the interfacial temperature and facilitate the interdiffusion of molecular chain segments at the interface, consequently resulting in rapidly enhanced bonding. Also, the microchannel distortion after ultrasonic actuation was found to be satisfactory—another important requirement. From dynamic mechanical analysis, the glass transition temperature of COC was found to increase with increasing frequency, and the temperature of the bulk polymer under ultrasonic actuation was still well under Tg; therefore the deformation is minor under ultrasonic

  1. Power system with an integrated lubrication circuit (United States)

    Hoff, Brian D.; Akasam, Sivaprasad; Algrain, Marcelo C.; Johnson, Kris W.; Lane, William H.


    A power system includes an engine having a first lubrication circuit and at least one auxiliary power unit having a second lubrication circuit. The first lubrication circuit is in fluid communication with the second lubrication circuit.

  2. Experimental investigation on NOx and green house gas emissions from a marine auxiliary diesel engine using ultralow sulfur light fuel. (United States)

    Geng, Peng; Tan, Qinming; Zhang, Chunhui; Wei, Lijiang; He, Xianzhong; Cao, Erming; Jiang, Kai


    In recent years, marine auxiliary diesel engine has been widely used to produce electricity in the large ocean-going ship. One of the main technical challenges for ocean-going ship is to reduce pollutant emissions from marine auxiliary diesel engine and to meet the criteria of disposal on ships pollutants of IMO (International Maritime Organization). Different technical changes have been introduced in marine auxiliary diesel engine to apply clean fuels to reduce pollutant emissions. The ultralow sulfur light fuel will be applied in diesel engine for emission reductions in China. This study is aimed to investigate the impact of fuel (ultralow sulfur light fuel) on the combustion characteristic, NOx and green house gas emissions in a marine auxiliary diesel engine, under the 50%-90% engine speeds and the 25%-100% engine torques. The experimental results show that, in the marine auxiliary diesel engine, the cylinder pressure and peak heat release rate increase slightly with the increase of engine torques, while the ignition advances and combustion duration become longer. With the increases of the engine speed and torque, the fuel consumption decreases significantly, while the temperature of the exhaust manifold increases. The NOx emissions increase significantly with the increases of the engine speed and torque. The NO emission increases with the increases of the engine speed and torque, while the NO2 emission decreases. Meanwhile, the ratio of NO2 and NO is about 1:1 when the diesel engine operated in the low speed and load, while the ratio increases significantly with the increases of engine speed and torque, due to the increase of the cylinder temperature in the diffusive combustion mode. Moreover, the CO2 emission increases with the increases of engine speed and torque by the use of ultralow sulfur light fuel.

  3. Improving Estimations of Spatial Distribution of Soil Respiration Using the Bayesian Maximum Entropy Algorithm and Soil Temperature as Auxiliary Data. (United States)

    Hu, Junguo; Zhou, Jian; Zhou, Guomo; Luo, Yiqi; Xu, Xiaojun; Li, Pingheng; Liang, Junyi


    Soil respiration inherently shows strong spatial variability. It is difficult to obtain an accurate characterization of soil respiration with an insufficient number of monitoring points. However, it is expensive and cumbersome to deploy many sensors. To solve this problem, we proposed employing the Bayesian Maximum Entropy (BME) algorithm, using soil temperature as auxiliary information, to study the spatial distribution of soil respiration. The BME algorithm used the soft data (auxiliary information) effectively to improve the estimation accuracy of the spatiotemporal distribution of soil respiration. Based on the functional relationship between soil temperature and soil respiration, the BME algorithm satisfactorily integrated soil temperature data into said spatial distribution. As a means of comparison, we also applied the Ordinary Kriging (OK) and Co-Kriging (Co-OK) methods. The results indicated that the root mean squared errors (RMSEs) and absolute values of bias for both Day 1 and Day 2 were the lowest for the BME method, thus demonstrating its higher estimation accuracy. Further, we compared the performance of the BME algorithm coupled with auxiliary information, namely soil temperature data, and the OK method without auxiliary information in the same study area for 9, 21, and 37 sampled points. The results showed that the RMSEs for the BME algorithm (0.972 and 1.193) were less than those for the OK method (1.146 and 1.539) when the number of sampled points was 9 and 37, respectively. This indicates that the former method using auxiliary information could reduce the required number of sampling points for studying spatial distribution of soil respiration. Thus, the BME algorithm, coupled with soil temperature data, can not only improve the accuracy of soil respiration spatial interpolation but can also reduce the number of sampling points.

  4. Regulation of high-voltage-activated Ca(2+) channel function, trafficking, and membrane stability by auxiliary subunits. (United States)

    Felix, Ricardo; Calderón-Rivera, Aida; Andrade, Arturo


    Voltage-gated Ca(2+) (CaV) channels mediate Ca(2+) ions influx into cells in response to depolarization of the plasma membrane. They are responsible for initiation of excitation-contraction and excitation-secretion coupling, and the Ca(2+) that enters cells through this pathway is also important in the regulation of protein phosphorylation, gene transcription, and many other intracellular events. Initial electrophysiological studies divided CaV channels into low-voltage-activated (LVA) and high-voltage-activated (HVA) channels. The HVA CaV channels were further subdivided into L, N, P/Q, and R-types which are oligomeric protein complexes composed of an ion-conducting CaVα1 subunit and auxiliary CaVα2δ, CaVβ, and CaVγ subunits. The functional consequences of the auxiliary subunits include altered functional and pharmacological properties of the channels as well as increased current densities. The latter observation suggests an important role of the auxiliary subunits in membrane trafficking of the CaVα1 subunit. This includes the mechanisms by which CaV channels are targeted to the plasma membrane and to appropriate regions within a given cell. Likewise, the auxiliary subunits seem to participate in the mechanisms that remove CaV channels from the plasma membrane for recycling and/or degradation. Diverse studies have provided important clues to the molecular mechanisms involved in the regulation of CaV channels by the auxiliary subunits, and the roles that these proteins could possibly play in channel targeting and membrane Stabilization.

  5. Computing conformational free energy differences in explicit solvent: An efficient thermodynamic cycle using an auxiliary potential and a free energy functional constructed from the end points. (United States)

    Harris, Robert C; Deng, Nanjie; Levy, Ronald M; Ishizuka, Ryosuke; Matubayasi, Nobuyuki


    Many biomolecules undergo conformational changes associated with allostery or ligand binding. Observing these changes in computer simulations is difficult if their timescales are long. These calculations can be accelerated by observing the transition on an auxiliary free energy surface with a simpler Hamiltonian and connecting this free energy surface to the target free energy surface with free energy calculations. Here, we show that the free energy legs of the cycle can be replaced with energy representation (ER) density functional approximations. We compute: (1) The conformational free energy changes for alanine dipeptide transitioning from the right-handed free energy basin to the left-handed basin and (2) the free energy difference between the open and closed conformations of β-cyclodextrin, a "host" molecule that serves as a model for molecular recognition in host-guest binding. β-cyclodextrin contains 147 atoms compared to 22 atoms for alanine dipeptide, making β-cyclodextrin a large molecule for which to compute solvation free energies by free energy perturbation or integration methods and the largest system for which the ER method has been compared to exact free energy methods. The ER method replaced the 28 simulations to compute each coupling free energy with two endpoint simulations, reducing the computational time for the alanine dipeptide calculation by about 70% and for the β-cyclodextrin by > 95%. The method works even when the distribution of conformations on the auxiliary free energy surface differs substantially from that on the target free energy surface, although some degree of overlap between the two surfaces is required. © 2016 Wiley Periodicals, Inc.

  6. Study on the Diachronic Evolution of the Case-auxiliary Word"No"%格助词「の」功能的历时演变研究

    Institute of Scientific and Technical Information of China (English)



    As the most frequently used auxiliary word in Japanese,"no"is multi-functional. From a diachronic perspective, this paper investigates the etymology, the original function and the dominating functions of"no". It is found that the essential function of"no"is its attributive function, from which the other functions such as quasi-nominal, nominative, and objective functions derive. All the functions are closely related internally to form a unified system. The evolution and derivation of the case-auxiliary word"no"does not happen randomly, but under the influence of the Gestalt Psychology and economic principle of language.%「の」是日语中使用最为频繁的助词,拥有纷繁复杂的功能.本文从历时角度考察了格助词「の」的语源、原始功能及其它主要功能,认为「の」的本质功能为连体格功能,其准体功能、主格、宾格以及对象格等各功能都由连体格功能衍生而来,各功能内部密切相关,构成了统一连贯的功能意义体系「.の」的意义功能的演变和衍生并非随机发生,其受到了人类认知的完形心理和经济动因的影响.

  7. S-glutathionylation of an auxiliary subunit confers redox sensitivity to Kv4 channel inactivation.

    Directory of Open Access Journals (Sweden)

    Henry H Jerng

    Full Text Available Reactive oxygen species (ROS regulate ion channels, modulate neuronal excitability, and contribute to the etiology of neurodegenerative disorders. ROS differentially suppress fast "ball-and-chain" N-type inactivation of cloned Kv1 and Kv3 potassium channels but not of Kv4 channels, likely due to a lack of reactive cysteines in Kv4 N-termini. Recently, we discovered that N-type inactivation of Kv4 channel complexes can be independently conferred by certain N-terminal variants of Kv4 auxiliary subunits (DPP6a, DPP10a. Here, we report that both DPP6a and DPP10a, like Kv subunits with redox-sensitive N-type inactivation, contain a highly conserved cysteine in their N-termini (Cys-13. To test if N-type inactivation mediated by DPP6a or DPP10a is redox sensitive, Xenopus oocyte recordings were performed to examine the effects of two common oxidants, tert-butyl hydroperoxide (tBHP and diamide. Both oxidants markedly modulate DPP6a- or DPP10a-conferred N-type inactivation of Kv4 channels, slowing the overall inactivation and increasing the peak current. These functional effects are fully reversed by the reducing agent dithiothreitol (DTT and appear to be due to a selective modulation of the N-type inactivation mediated by these auxiliary subunits. Mutation of DPP6a Cys-13 to serine eliminated the tBHP or diamide effects, confirming the importance of Cys-13 to the oxidative regulation. Biochemical studies designed to elucidate the underlying molecular mechanism show no evidence of protein-protein disulfide linkage formation following cysteine oxidation. Instead, using a biotinylated glutathione (BioGEE reagent, we discovered that oxidation by tBHP or diamide leads to S-glutathionylation of Cys-13, suggesting that S-glutathionylation underlies the regulation of fast N-type inactivation by redox. In conclusion, our studies suggest that Kv4-based A-type current in neurons may show differential redox sensitivity depending on whether DPP6a or DPP10a is highly

  8. Long noncoding RNAs as auxiliary biomarkers for gastric cancer screening: A pooled analysis of individual studies (United States)

    Cui, Zhaolei; Chen, Yan; Xiao, Zhenzhou; Hu, Minhua; Lin, Yingying; Chen, Yansong; Zheng, Yuhong


    Background Long non-coding RNAs (lncRNAs) are highlighted as novel cancer biomarkers with great promise. Herein, we focused on summarizing the overall diagnostic performance of lncRNAs for gastric cancer (GC). Methods Publications fulfilling the search criteria were selected from the online databases. Study quality was assessed according to the Quality Assessment for Studies of Diagnostic Accuracy (QUADAS) checklist. The summary receiver operator characteristic (SROC) curve was plotted using a bivariate meta-analysis model. Statistical analysis was performed based on the platforms of STATA 12.0 and Meta-Disc 1.4 software. Results Fifteen studies with 1252 patients and 1283 matched controls were included. The pooled sensitivity and specificity for lncRNA expression profile in differentiating GC patients from cancer-free individuals were 0.68 (95%CI: 0.61-0.74) and 0.79 (95%CI: 0.72-0.84), respectively, corresponding to an area under curve (AUC) of 0.80. Moreover, the stratified analyses demonstrated that plasma-based lncRNA profiling harbored higher accuracy than that tissue-based assay (specificity: 0.80 versus 0.75; AUC: 0.84 versus 0.77). Conclusions LncRNA profiling hallmarks a moderate diagnostic value in the management of GC and that lncRNA expression patterns may potentially be utilized as auxiliary biomarkers in confirming GC. PMID:27015554

  9. Auxiliary-field quantum Monte Carlo simulations of neutron matter in chiral effective field theory. (United States)

    Wlazłowski, G; Holt, J W; Moroz, S; Bulgac, A; Roche, K J


    We present variational Monte Carlo calculations of the neutron matter equation of state using chiral nuclear forces. The ground-state wave function of neutron matter, containing nonperturbative many-body correlations, is obtained from auxiliary-field quantum Monte Carlo simulations of up to about 340 neutrons interacting on a 10(3) discretized lattice. The evolution Hamiltonian is chosen to be attractive and spin independent in order to avoid the fermion sign problem and is constructed to best reproduce broad features of the chiral nuclear force. This is facilitated by choosing a lattice spacing of 1.5 fm, corresponding to a momentum-space cutoff of Λ=414  MeV/c, a resolution scale at which strongly repulsive features of nuclear two-body forces are suppressed. Differences between the evolution potential and the full chiral nuclear interaction (Entem and Machleidt Λ=414  MeV [L. Coraggio et al., Phys. Rev. C 87, 014322 (2013).

  10. Novel high power impulse magnetron sputtering enhanced by an auxiliary electrical field. (United States)

    Li, Chunwei; Tian, Xiubo


    The high power impulse magnetron sputtering (HIPIMS) technique is a novel highly ionized physical vapor deposition method with a high application potential. However, the electron utilization efficiency during sputtering is rather low and the metal particle ionization rate needs to be considerably improved to allow for a large-scale industrial application. Therefore, we enhanced the HIPIMS technique by simultaneously applying an electric field (EF-HIPIMS). The effect of the electric field on the discharge process was studied using a current sensor and an optical emission spectrometer. Furthermore, the spatial distribution of the electric potential and electric field during the EF-HIPIMS process was simulated using the ANSYS software. The results indicate that a higher electron utilization efficiency and a higher particle ionization rate could be achieved. The auxiliary anode obviously changed the distribution of the electric potential and the electric field in the discharge region, which increased the plasma density and enhanced the degree of ionization of the vanadium and argon gas. Vanadium films were deposited to further compare both techniques, and the morphology of the prepared films was investigated by scanning electron microscopy. The films showed a smaller crystal grain size and a denser growth structure when the electric field was applied during the discharge process.

  11. Floor Response Evaluation for Auxiliary Building Subjected to Aircraft Impact Loading

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Sang Shup; Hahm, Daegi; Choi, Inkil [Korea Atomic Energy Research institute, Daejeon (Korea, Republic of)


    These studies have been aimed to verify and ensure the safety of the targeted walls and structures especially in the viewpoint of the deterministic approach. However, a probabilistic safety assessment as well as deterministic approach for the damage of the internal component in the nuclear power plants (NPPs) subjected to aircraft crash is also needed. A probabilistic safety assessment for aircraft crash includes many uncertainties such as impact velocity, mass, impact location, shape, size, material etc. of aircraft. In this paper, an impact location was selected among the various parameters. This paper found the acceleration floor response spectra at specified locations (safety related components) on the target structure that assumed to be impact velocity 150m/s and maximum fuel for the specified aircraft model. In order to obtain the floor response in case of the crash with a various locations, the analyses for the auxiliary building subjected to aircraft impact were performed using Riera force history method and missile-target interaction method. The difference between responses in case of the building floor subjected to impact was occurred. Thus, in order to obtain the more accurate results, missile-target interaction method was used. This paper found the response at the selected point (node point No. 51). In order to probabilistic assessment for the safety related components, the assessment for a various parameters (velocity, mass, materials etc.) as well as impact locations should be needed.

  12. Quench Propagation and Heating in the Superconducting 600 A Auxiliary Busbars of the LHC

    CERN Document Server

    Calvi, M; Sonnemann, F


    In the Large Hadron Collider (LHC) at CERN 22 km of flexible superconducting cable, the auxiliary busbar cable, will conduct currents of up to 600 A to a large number of corrector magnets distributed throughout the accelerator. A prototype cable with 42 active conductors underwent several experiments to measure the hot spot temperature and the quench propagation velocity as a function of the current. The former was evaluated for various energy extraction scenarios as they are foreseen for the LHC corrector circuits. The experimental results and the heat flow simulations show that the quench behavior in this busbar prototype is strongly influenced by the heat flow through the insulation material (polyimide) into the helium bath, leading to stable configurations above the critical temperature Tc for currents between 250 A and 500 A. Special attention was paid to the study of discontinuities in the wires, like feed-throughs, where the wire is not immersed in liquid helium, and joints, where the wire cross-sectio...

  13. Quench propagation and heating in the superconducting 600 a auxiliary busbars of the LHC

    CERN Document Server

    Herzog, R; Sonnemann, F


    In the Large Hadron Collider (LHC) at CERN 22 km of flexible superconducting cable, the auxiliary busbar cable, will conduct currents of up to 600 A to a large number of corrector magnets distributed throughout the accelerator. A prototype cable with 42 active conductors underwent several experiments to measure the hot spot temperature and the quench propagation velocity as a function of the current. The former was evaluated for various energy extraction scenarios as they are foreseen for the LHC corrector circuits. The experimental results and the heat flow simulations show that the quench behavior in this busbar prototype is strongly influenced by the heat flow through the insulation material (polyimide) into the helium bath, leading to stable configurations above the critical temperature T/sub c/ for currents between 250 A and 500 A. Special attention was paid to the study of discontinuities in the wires, like feedthroughs, where the wire is not immersed in liquid helium, and joints, where the wire cross-s...

  14. C-terminal interactors of the AMPA receptor auxiliary subunit Shisa9.

    Directory of Open Access Journals (Sweden)

    Anna R Karataeva

    Full Text Available Shisa9 (initially named CKAMP44 has been identified as auxiliary subunit of the AMPA-type glutamate receptors and was shown to modulate its physiological properties. Shisa9 is a type-I transmembrane protein and contains a C-terminal PDZ domain that potentially interacts with cytosolic proteins. In this study, we performed a yeast two-hybrid screening that yielded eight PDZ domain-containing interactors of Shisa9, which were independently validated. The identified interactors are known scaffolding proteins residing in the neuronal postsynaptic density. To test whether C-terminal scaffolding interactions of Shisa9 affect synaptic AMPA receptor function in the hippocampus, we disrupted these interactions using a Shisa9 C-terminal mimetic peptide. In the absence of scaffolding interactions of Shisa9, glutamatergic AMPA receptor-mediated synaptic currents in the lateral perforant path of the mouse hippocampus had a faster decay time, and paired-pulse facilitation was reduced. Furthermore, disruption of the PDZ interactions between Shisa9 and its binding partners affected hippocampal network activity. Taken together, our data identifies novel interaction partners of Shisa9, and shows that the C-terminal interactions of Shisa9 through its PDZ domain interaction motif are important for AMPA receptor synaptic and network functions.

  15. Amide bond cleavage initiated by coordination with transition metal ions and tuned by an auxiliary ligand. (United States)

    Yang, Yongpo; Lu, Chunxin; Wang, Hailong; Liu, Xiaoming


    The reaction of ligand , N,N-bis(pyridin-2-ylmethyl)acetamide, with five transition metal salts, FeCl3·6H2O, CuCl2·2H2O, Cu(ClO4)2·6H2O, ZnCl2 and K2PtCl4/KI, produced five metal complexes, [(μ-O)(FeClL')(FeCl3)] (), [CuLCl2] (), [CuBPA(ClO4)(CHCN)] ClO4 (), [ZnLCl2] () and [PtLI2] (), where = 1-(2,4,5-tri(pyridin-2-yl)-3-(pyridin-2-ylmethyl)imidazolidin-1-yl)ethanone which formed in situ, and BPA = bis(pyridin-2-ylmethyl)amine. The ligand and complexes were characterized by a variety of spectroscopic techniques including X-ray single crystal diffraction where applicable. Depending on the metal ion and auxiliary ligand of the complex, the acetyl group of the ligand could be either intact or cleaved. When ferric chloride hexahydrate was used, the deacetylation proceeded even further and a novel heterocyclic compound () was formed in situ. A possible mechanism was proposed for the formation of the heterocyclic compound found in complex . Our results indicate that to cleave effectively an amide bond, it is essential for a metal centre to bind to the amide bond and the metal centre is of sufficient Lewis acidity.

  16. Longterm outcomes of auxiliary partial orthotopic liver transplantation in preadolescent children with fulminant hepatic failure. (United States)

    Weiner, Joshua; Griesemer, Adam; Island, Eddie; Lobritto, Steven; Martinez, Mercedes; Selvaggi, Gennaro; Lefkowitch, Jay; Velasco, Monica; Tryphonopoulos, Panagiotis; Emond, Jean; Tzakis, Andreas; Kato, Tomoaki


    By preserving part of the native liver, auxiliary partial orthotopic liver transplantation (APOLT) provides the advantage of potential immunosuppression (ISP) withdrawal if the native liver recovers but has had limited acceptance, especially in the United States, due to technical complications and low rates of native liver regeneration. No previous study has evaluated APOLT specifically for preadolescent children with fulminant hepatic failure (FHF). This population might benefit especially based on greater capacity for liver regeneration. Data from 13 preadolescent children who underwent APOLT were compared to 13 matched controls who underwent orthotopic liver transplantation (OLT) for FHF from 1996 to 2013. There were no significant differences in patient demographics or survival between the 2 groups. However, all surviving OLT recipients (10/13) remain on ISP, while all but 1 surviving APOLT recipient (12/13) showed native liver regeneration, and the first 10 recipients (76.9%) are currently off ISP with 2 additional patients currently weaning. In our experience, APOLT produced excellent survival and high rates of native liver regeneration in preadolescent children with FHF. This represents the largest series to date to report such outcomes. Liberating these children from lifelong ISP without the downside of increased surgical morbidity makes APOLT an attractive alternative. In conclusion, we therefore propose that, with the availability of technical expertise and with the technical modifications above, APOLT for FHF should be strongly considered for preteenage children with FHF.

  17. Evaluation of Flygt Propeller Xixers for Double Shell Tank (DST) High Level Waste Auxiliary Solids Mobilization

    Energy Technology Data Exchange (ETDEWEB)



    The River Protection Project (RPP) is planning to retrieve radioactive waste from the single-shell tanks (SST) and double-shell tanks (DST) underground at the Hanford Site. This waste will then be transferred to a waste treatment plant to be immobilized (vitrified) in a stable glass form. Over the years, the waste solids in many of the tanks have settled to form a layer of sludge at the bottom. The thickness of the sludge layer varies from tank to tank, from no sludge or a few inches of sludge to about 15 ft of sludge. The purpose of this technology and engineering case study is to evaluate the Flygt{trademark} submersible propeller mixer as a potential technology for auxiliary mobilization of DST HLW solids. Considering the usage and development to date by other sites in the development of this technology, this study also has the objective of expanding the knowledge base of the Flygt{trademark} mixer concept with the broader perspective of Hanford Site tank waste retrieval. More specifically, the objectives of this study delineated from the work plan are described.

  18. Auxiliary nurse midwive training in India Population Project: inputs and their impact. (United States)

    Sawhney, N; Dayal, S M


    A discussion of the training program for auxiliary nurse midwives (ANMs) connected with their role in the Family Welfare Programme. A World Bank Appraisal Mission had reviewed the existing training program under the Indian Population Project and cited poor quality of training, inadequate facilities, and irregular recruitment of students. The Population Centre was given responsibility for improving and revising the program. Existing curriculum was revised against the job functions of the ANMs, and the revision was pretested, further revised, and implemented in all Training Centres through the Project Implementation Unit. Main changes were made in the curriculum, field training, and orientation of trainers. Additional topics on family planning were added, and the family planning component of the training period was increased from 60 to 70 hours. Field work was increased, with 32 hours of classroom and 58 hours of practical field work. The required number of ANMs have been trained and placed in position; no position remains vacant. Additional inputs, in the form of buildings for all Training Centres, hotel accomodations for 10 trainees in each Rural Demonstration Area, and 1 extra Sister Tutor per trainee have been provided. Efforts have been made to fill all the training posts. In comparing project districts with nonproject districts, ANM training is more favorable in the project districts.

  19. Effect of ultrasonic reactor and auxiliary stirring on oil removal from oily sludge. (United States)

    Zhao, Xiaofei; Zhang, Xiaoyang; Liu, Lixin; Fan, Lei; Ge, Dan


    In this paper, oily sludge cleaning by using ultrasonic waves was further studied to ensure how the ultrasonic reactor, such as material, bottom thickness, diameter, and auxiliary mixing, effects oil removal from oily sludge. Oily sludge (S) with an initial oil content of 19.29% was mixed with distilled water (W) and treated in an ultrasonic cleaning tank, f = 40,000 Hz at 30°C. This paper was carried out around the ultrasonic reactor, such as material, diameter, and bottom thickness. The results show that acoustic resistance is the main factor affecting the material of the ultrasonic reactor. The larger the diameter of the reaction, the lower the thickness of the S-W mixture of the same quality; the smaller the diffusion attenuation of the ultrasonic wave, the higher the oil removal rate. In this paper, the cleaning efficiency seems to be independent of the bottom thickness of the reactor. This may be due to the hale wavelengths (λ/2) in polyethylene (λ/2 = 2.4 cm) and glass (λ/2 = 7.08 cm) being far greater than the range of bottom thickness. Proper mixing (200 rmin(-1)) can improve the oil removal rate (92.8%), increased by 8.69%, but when the strength is too large, the oil removal rate is reduced.

  20. The mitochondrial Ca2+ uniporter: regulation by auxiliary subunits and signal transduction pathways. (United States)

    Jhun, Bong Sook; Mishra, Jyotsna; Monaco, Sarah; Fu, Deming; Jiang, Wenmin; Sheu, Shey-Shing; O-Uchi, Jin


    Mitochondrial Ca(2+) homeostasis, the Ca(2+) influx-efflux balance, is responsible for the control of numerous cellular functions, including energy metabolism, generation of reactive oxygen species, spatiotemporal dynamics of Ca(2+) signaling, and cell growth and death. Recent discovery of the molecular identity of the mitochondrial Ca(2+) uniporter (MCU) provides new possibilities for application of genetic approaches to study the mitochondrial Ca(2+) influx mechanism in various cell types and tissues. In addition, the subsequent discovery of various auxiliary subunits associated with MCU suggests that mitochondrial Ca(2+) uptake is not solely regulated by a single protein (MCU), but likely by a macromolecular protein complex, referred to as the MCU-protein complex (mtCUC). Moreover, recent reports have shown the potential role of MCU posttranslational modifications in the regulation of mitochondrial Ca(2+) uptake through mtCUC. These observations indicate that mtCUCs form a local signaling complex at the inner mitochondrial membrane that could significantly regulate mitochondrial Ca(2+) handling, as well as numerous mitochondrial and cellular functions. In this review we discuss the current literature on mitochondrial Ca(2+) uptake mechanisms, with a particular focus on the structure and function of mtCUC, as well as its regulation by signal transduction pathways, highlighting current controversies and discrepancies.

  1. The Site of the ASTRI SST-2M Telescope Prototype: Atmospheric Monitoring and Auxiliary Instrumentation

    CERN Document Server

    Leto, G; Bellassai, G; Bruno, P; Fiorini, M; Grillo, A; Martinetti, E; La Rosa, G; Segreto, A; Sottile, G; Stringhetti, L


    ASTRI is a Flagship Project led by the Italian National Institute of Astrophysics, INAF. The main objective of the ASTRI project is to develop a prototype of the Small Size class Telescope for the Cherenkov Telescope Array (CTA) in a dual-mirror configuration (SST-2M). The ASTRI SST-2M is an end-to-end prototype that will be fully developed by the ASTRI Collaboration from the optics design and manufacturing to the focal plane camera, from the structure of the mount to all the needed software. The ASTRI SST-2M prototype will be placed at the INAF "M.G. Fracastoro" observing station in Serra La Nave on the Etna Mountain near Catania, Italy. The technological solutions adopted will be tested on field: observations of the Crab Nebula and of other sources will be essential part of the science verification phase, with the aim to assess the achievement of the scientific requirements. In the following we present the Serra La Nave site together with all the auxiliary instruments needed for atmospheric monitoring and c...

  2. Auxiliary partial liver transplantation for acute liver failure using "high risk" grafts: Case report. (United States)

    Duan, Wei-Dong; Wang, Xi-Tao; Wang, Hong-Guang; Ji, Wen-Bin; Li, Hao; Dong, Jia-Hong


    Acute liver failure (ALF) is a reversible disorder that is associated with an abrupt loss of hepatic mass, rapidly progressive encephalopathy and devastating complications. Despite its high mortality, an emergency liver transplantation nowadays forms an integral part in ALF management and has substantially improved the outcomes of ALF. Here, we report the case of a 32-year-old female patient who was admitted with grade IV hepatic encephalopathy (coma) following drug-induced ALF. We performed an emergency auxiliary partial orthotopic liver transplantation with a "high risk" graft (liver macrovesicular steatosis approximately 40%) from a living donor. The patient was discharged on postoperative day 57 with normal liver function. Weaning from immunosuppression was achieved 9 mo after transplantation. A follow-up using CT scan showed a remarkable increase in native liver volume and gradual loss of the graft. More than 6 years after the transplantation, the female now has a 4-year-old child and has returned to work full-time without any neurological sequelae.

  3. Native portal vein embolization for persistent hyperoxaluria following kidney and auxiliary partial liver transplantation. (United States)

    Elias, N; Kawai, T; Ko, D S C; Saidi, R; Tolkoff-Rubin, N; Wicky, S; Cosimi, A B; Hertl, M


    Type 1 primary hyperoxaluria (PH1) causes renal failure, for which isolated kidney transplantation (KT) is usually unsuccessful treatment due to early oxalate stone recurrence. Although hepatectomy and liver transplantation (LT) corrects PH1 enzymatic defect, simultaneous auxiliary partial liver transplantation (APLT) and KT have been suggested as an alternative approach. APLT advantages include preservation of the donor pool and retention of native liver function in the event of liver graft loss. However, APLT relative mass may be inadequate to correct the defect. We here report the first case of native portal vein embolization (PVE) to increase APLT to native liver mass ratio (APLT/NLM-R). Following initial combined APLT-KT, both allografts functioned well, but oxalate plasma levels did not normalize. We postulated the inadequate APLT/NLM-R could be corrected by trans-hepatic native PVE. The resulting increased APLT/NLM-R decreased serum oxalate to normal levels within 1 month following PVE. We conclude that persistently elevated oxalate levels after combined APLT-KT for PH1 treatment, results from inadequate relative functional capacity. This can be reversed by partial native PVE to decrease portal flow to the native liver. This approach might be applicable to other scenarios where partial grafts have been transplanted to replace native liver function.

  4. A Bayesian spatio-temporal geostatistical model with an auxiliary lattice for large datasets

    KAUST Repository

    Xu, Ganggang


    When spatio-temporal datasets are large, the computational burden can lead to failures in the implementation of traditional geostatistical tools. In this paper, we propose a computationally efficient Bayesian hierarchical spatio-temporal model in which the spatial dependence is approximated by a Gaussian Markov random field (GMRF) while the temporal correlation is described using a vector autoregressive model. By introducing an auxiliary lattice on the spatial region of interest, the proposed method is not only able to handle irregularly spaced observations in the spatial domain, but it is also able to bypass the missing data problem in a spatio-temporal process. Because the computational complexity of the proposed Markov chain Monte Carlo algorithm is of the order O(n) with n the total number of observations in space and time, our method can be used to handle very large spatio-temporal datasets with reasonable CPU times. The performance of the proposed model is illustrated using simulation studies and a dataset of precipitation data from the coterminous United States.

  5. Rechargeable aqueous lithium-air batteries with an auxiliary electrode for the oxygen evolution (United States)

    Sunahiro, S.; Matsui, M.; Takeda, Y.; Yamamoto, O.; Imanishi, N.


    A rechargeable aqueous lithium-air cell with a third auxiliary electrode for the oxygen evolution reaction was developed. The cell consists of a lithium metal anode, a lithium conducting solid electrolyte of Li1+x+yAlx(Ti,Ge)2-xSiyP3-yO12, a carbon black oxygen reduction air electrode, a RuO2 oxygen evolution electrode, and a saturated aqueous solution of LiOH with 10 M LiCl. The cell was successfully operated for several cycles at 0.64 mA cm-2 and 25 °C under air, where the capacity of air electrode was 2000 mAh gcathod-1. The cell performance was degraded gradually by cycling under open air. The degradation was reduced under CO2-free air and pure oxygen. The specific energy density was calculated to be 810 Wh kg-1 from the weight of water, lithium, oxygen, and carbon in the air electrode.

  6. A study of H+H2 and several H-bonded molecules by phaseless auxiliary-field quantum Monte Carlo with plane wave and Gaussian basis sets. (United States)

    Al-Saidi, W A; Krakauer, Henry; Zhang, Shiwei


    The authors present phaseless auxiliary-field (AF) quantum Monte Carlo (QMC) calculations of the ground states of some hydrogen-bonded systems. These systems were selected to test and benchmark different aspects of the new phaseless AF QMC method. They include the transition state of H+H(2) near the equilibrium geometry and in the van der Walls limit, as well as the H(2)O, OH, and H(2)O(2) molecules. Most of these systems present significant challenges for traditional independent-particle electronic structure approaches, and many also have exact results available. The phaseless AF QMC method is used either with a plane wave basis with pseudopotentials or with all-electron Gaussian basis sets. For some systems, calculations are done with both to compare and characterize the performance of AF QMC under different basis sets and different Hubbard-Stratonovich decompositions. Excellent results are obtained using as input single Slater determinant wave functions taken from independent-particle calculations. Comparisons of the Gaussian based AF QMC results with exact full configuration interaction show that the errors from controlling the phase problem with the phaseless approximation are small. At the large basis-size limit, the AF QMC results using both types of basis sets are in good agreement with each other and with experimental values.

  7. SSH2S: Hydrogen storage in complex hydrides for an auxiliary power unit based on high temperature proton exchange membrane fuel cells (United States)

    Baricco, Marcello; Bang, Mads; Fichtner, Maximilian; Hauback, Bjorn; Linder, Marc; Luetto, Carlo; Moretto, Pietro; Sgroi, Mauro


    The main objective of the SSH2S (Fuel Cell Coupled Solid State Hydrogen Storage Tank) project was to develop a solid state hydrogen storage tank based on complex hydrides and to fully integrate it with a High Temperature Proton Exchange Membrane (HT-PEM) fuel cell stack. A mixed lithium amide/magnesium hydride system was used as the main storage material for the tank, due to its high gravimetric storage capacity and relatively low hydrogen desorption temperature. The mixed lithium amide/magnesium hydride system was coupled with a standard intermetallic compound to take advantage of its capability to release hydrogen at ambient temperature and to ensure a fast start-up of the system. The hydrogen storage tank was designed to feed a 1 kW HT-PEM stack for 2 h to be used for an Auxiliary Power Unit (APU). A full thermal integration was possible thanks to the high operation temperature of the fuel cell and to the relative low temperature (170 °C) for hydrogen release from the mixed lithium amide/magnesium hydride system.

  8. Design and Discussion of Auxiliary Transmission%辅助传动的设计与探讨

    Institute of Scientific and Technical Information of China (English)

    杨占凯; 李英; 张春晓


    辅助传动装置是磨机、混合机、回转窑等大型回转设备的辅助装置,用于大型回转设备的检修、更换衬板及长时间停机后松动物料使用。在设计辅助传动装置时,既要满足设备使用扭矩的需求,又要考虑装置的利用率比较低,对电机、减速机、联轴器及齿式离合器进行合理选型与设计,避免能力过剩产生的浪费。本文对辅助接手强度进行校核,以达到降本增效目的。%The auxiliary transmission is auxiliary device of mills , mixers , rotary kiln and other large equipment . It is used when overhaul and lining replacement and loosing material of large rotary equipment after long downtime . In the design of the auxiliary transmission , it does not only meets the requirements of torque for equipment opera -tion , but also considers the relatively low utilization of the device in order to rationally select and design the motor , reducer , coupling and clutch avoiding waste by excessive capacity . It examined the strength of the auxiliary clutch teeth to achieve the purposes of cost reduction and efficiency promotion .

  9. All Sky Camera, LIDAR and Electric Field Meter: auxiliary instruments for the ASTRI SST-2M prototype

    CERN Document Server

    Leto, Giuseppe; Bellassai, Giancarlo; Bruno, Pietro; Maccarone, Maria Concetta; Martinetti, Eugenio


    ASTRI SST-2M is the end-to-end prototype telescope of the Italian National Institute of Astro- physics, INAF, designed to investigate the 10-100 TeV band in the framework of the Cherenkov Telescope Array, CTA. The ASTRI SST-2M telescope has been installed in Italy in September 2014, at the INAF ob- serving station located at Serra La Nave on Mount Etna. The telescope is foreseen to be completed and fully operative in spring 2015 including auxiliary instrumentation needed to support both operations and data anal- ysis. In this contribution we present the current status of a sub-set of the auxiliary instruments that are being used at the Serra La Nave site, namely an All Sky Camera, an Electric Field Meter and a Raman Lidar devoted, together with further instrumentation, to the monitoring of the atmospheric and environmental conditions. The data analysis techniques under development for these instruments could be applied at the CTA sites, where similar auxiliary instrumentation will be installed.

  10. Revision of IMO Model Course 3.17 Maritime English. Focus on Maritime English to Auxiliary Personnel

    Directory of Open Access Journals (Sweden)

    L. Martes


    Full Text Available Under the Manila 2010 amendments to the STCW , all crew members on board cruise vessels, mainly those assisting passengers during emergency situations and not only, “should be able to communicate safety-related issues in English or in the language spoken by the passengers and other personnel on board.” Having in view that navigational and safety communications from ship to shore and vice versa, ship to ship, and on board ships must be precise, simple and unambiguous, so as to avoid confusion and error, besides the need to standardize the language used, there is a growing demand of developing communication skills in English, especially for personnel working on cruise vessels, but also on RORO vessels, yachts and small passenger vessels. This is the reason why we have designed, developed and are already delivering the “Maritime English for Auxiliary Personnel" course in Specialized Maritime English to auxiliary personnel working on board cruise vessels to develop their ability to communicate with passengers, mainly during an emergency. The course covers the specific language used to describe the parts of ships, organisation on board ships, all essential safety-related matters and work-specific topics. It also reflects the situations in which auxiliary personnel need to communicate, with each other, with other crew members and with shore side authorities. The final goal of this course is to improve fluency in spoken English in real life situations which, of course, can be both routine and non-routine.

  11. All Sky Camera, LIDAR and Electric Field Meter: Auxiliary instruments for the ASTRI SST-2M prototype

    Directory of Open Access Journals (Sweden)

    Leto Giuseppe


    Full Text Available ASTRI SST-2M is the end-to-end prototype telescope of the Italian National Institute of Astrophysics, INAF, designed to investigate the 10–100 TeV band in the framework of the Cherenkov Telescope Array, CTA. The ASTRI SST-2M telescope has been installed in Italy in September 2014, at the INAF observing station located at Serra La Nave on Mount Etna. The telescope is foreseen to be completed and fully operative in spring 2015 including auxiliary instrumentation needed to support both operations and data analysis. In this contribution we present the current status of a sub-set of the auxiliary instruments that are being used at the Serra La Nave site, namely an All Sky Camera, an Electric Field Meter and a Raman Lidar devoted, together with further instrumentation, to the monitoring of the atmospheric and environmental conditions. The data analysis techniques under development for these instruments could be applied at the CTA sites, where similar auxiliary instrumentation will be installed.

  12. Battery Management System—Balancing Modularization Based on a Single Switched Capacitor and Bi-Directional DC/DC Converter with the Auxiliary Battery

    Directory of Open Access Journals (Sweden)

    Mohamed Daowd


    Full Text Available Lithium-based batteries are considered as the most advanced batteries technology, which can be designed for high energy or high power storage systems. However, the battery cells are never fully identical due to the fabrication process, surrounding environment factors and differences between the cells tend to grow if no measures are taken. In order to have a high performance battery system, the battery cells should be continuously balanced for maintain the variation between the cells as small as possible. Without an appropriate balancing system, the individual cell voltages will differ over time and battery system capacity will decrease quickly. These issues will limit the electric range of the electric vehicle (EV and some cells will undergo higher stress, whereby the cycle life of these cells will be shorter. Quite a lot of cell balancing/equalization topologies have been previously proposed. These balancing topologies can be categorized into passive and active balancing. Active topologies are categorized according to the active element used for storing the energy such as capacitor and/or inductive component as well as controlling switches or converters. This paper proposes an intelligent battery management system (BMS including a battery pack charging and discharging control with a battery pack thermal management system. The BMS user input/output interfacing. The battery balancing system is based on battery pack modularization architecture. The proposed modularized balancing system has different equalization systems that operate inside and outside the modules. Innovative single switched capacitor (SSC control strategy is proposed to balance between the battery cells in the module (inside module balancing, IMB. Novel utilization of isolated bidirectional DC/DC converter (IBC is proposed to balance between the modules with the aid of the EV auxiliary battery (AB. Finally an experimental step-up has been implemented for the validation of the

  13. 基于J2EE的中学教学辅助平台的设计与实现%Design and Implementation of Teaching Auxiliary Platform Based on J2EE

    Institute of Scientific and Technical Information of China (English)

    熊世轩; 杨春艳


    This paper introduces the design and implementation of teaching auxiliary platform based on J2EE.The key technologies of the system are discussed.One is a User-Role-Page Group permission module which is built for setting user permission.The other is drawing function of Applet for the difficult problems such as inputting formula,special symbol and professional picture into system.The platform includes four functions:self-studying of students,management of teaching materials,interactive teaching and studying,system management.By these functions,a teaching auxiliary platform for middle school based on internet is realized.%使用J2EE编程技术,利用基于角色的权限设置方法和Applet网络图形编辑器,设计中学教学辅助平台。该平台解决了用户权限设置及专业公式、特殊符号和专业图形入库等问题,具有学生自主浏览学习、教师管理教学资料、师生教学交流互动、系统管理等功能,能实现中学网络化辅助教学。

  14. Using heteroaryl-lithium reagents as hydroxycarbonyl anion equivalents in conjugate addition reactions with (S,S)-(+)-pseudoephedrine as chiral auxiliary; enantioselective synthesis of 3-substituted pyrrolidines. (United States)

    Alonso, Beatriz; Ocejo, Marta; Carrillo, Luisa; Vicario, Jose L; Reyes, Efraim; Uria, Uxue


    We have developed an efficient protocol for carrying out the stereocontrolled formal conjugate addition of hydroxycarbonyl anion equivalents to α,β-unsaturated carboxylic acid derivatives using (S,S)-(+)-pseudoephedrine as chiral auxiliary, making use of the synthetic equivalence between the heteroaryl moieties and the carboxylate group. This protocol has been applied as key step in the enantioselective synthesis of 3-substituted pyrrolidines in which, after removing the chiral auxiliary, the heteroaryl moiety is converted into a carboxylate group followed by reduction and double nucleophilic displacement. Alternatively, the access to the same type of heterocyclic scaffold but with opposite absolute configuration has also been accomplished by making use of the regio- and diastereoselective conjugate addition of organolithium reagents to α,β,γ,δ-unsaturated amides derived from the same chiral auxiliary followed by chiral auxiliary removal, ozonolysis, and reductive amination/intramolecular nucleophilic displacement sequence.

  15. Application of artificial neural network model combined with four biomarkers in auxiliary diagnosis of lung cancer. (United States)

    Duan, Xiaoran; Yang, Yongli; Tan, Shanjuan; Wang, Sihua; Feng, Xiaolei; Cui, Liuxin; Feng, Feifei; Yu, Songcheng; Wang, Wei; Wu, Yongjun


    The purpose of the study was to explore the application of artificial neural network model in the auxiliary diagnosis of lung cancer and compare the effects of back-propagation (BP) neural network with Fisher discrimination model for lung cancer screening by the combined detections of four biomarkers of p16, RASSF1A and FHIT gene promoter methylation levels and the relative telomere length. Real-time quantitative methylation-specific PCR was used to detect the levels of three-gene promoter methylation, and real-time PCR method was applied to determine the relative telomere length. BP neural network and Fisher discrimination analysis were used to establish the discrimination diagnosis model. The levels of three-gene promoter methylation in patients with lung cancer were significantly higher than those of the normal controls. The values of Z(P) in two groups were 2.641 (0.008), 2.075 (0.038) and 3.044 (0.002), respectively. The relative telomere lengths of patients with lung cancer (0.93 ± 0.32) were significantly lower than those of the normal controls (1.16 ± 0.57), t = 4.072, P neural network were 0.670 (0.569-0.761) and 0.760 (0.664-0.840). The AUC of BP neural network was higher than that of Fisher discrimination analysis, and Z(P) was 0.76. Four biomarkers are associated with lung cancer. BP neural network model for the prediction of lung cancer is better than Fisher discrimination analysis, and it can provide an excellent and intelligent diagnosis tool for lung cancer.

  16. Establishment of a new pig model for auxiliary partial orthotopic liver transplantation

    Institute of Scientific and Technical Information of China (English)

    Cheng-Hong Peng; Liu-Bin Shi; Hong-Wei Zhang; Shu-You Peng; Guang-Wen Zhou; Hong-Wei Li


    AIM: To establish a new pig model for auxiliary partial orthotopic liver transplantation (APOLT).METHODS: The liver of the donor was removed from its body. The left lobe of the liver was resected in vivo and the right lobe was used as a graft. After the left lateral lobe of the recipient was resected, end-to-side anastomoses of suprahepatic inferior vena cava and portal vein were performed between the donor and recipient livers,respectively. End-to-end anastomoses were made between hepatic artery of graft and splenic artery of the host.Outside drainage was placed in donor common bile duct.RESULTS: Models of APOLT were established in 5 pigs with a success rate of 80%. Color ultrasound examination showed an increase of blood flow of graft on 5th d compared to the first day after operation. When animals were killed on the 5th d after operation, thrombosis of hepatic vein (HV) and portal vein (PV) were not found. Histopathological examination of liver samples revealed evidence of damage with mild steatosis and sporadic necrotic hepatocytes and focal hepatic lobules structure disorganized in graft. Infiltration of inflammatory cells was mild in portal or central vein area. Hematologic laboratory values and blood chemical findings revealed that compared with group A (before transplantation), mean arterial pressure (MAP), central venous pressure (CVP), buffer base (BB), standard bicarbonate (SB) and K+ in group B (after portal vein was clamped) decreased (P<0.01). After reperfusion of the graft, MAP, CVP and K+ restored gradually.CONCLUSION: Significant decrease of congestion in portal vein and shortened blocking time were obtained because of the application of in vitro veno-venous bypass during complete vascular clamping. This new procedure,with such advantages as simple vessel processing, quality anastomosis, less postoperative hemorrhage and higher success rate, effectively prevents ischemia reperfusion injury of the host liver and deserves to be spread.

  17. Dual stereoselectivity in the dialkylzinc reaction using (-)-beta-pinene derived amino alcohol chiral auxiliaries. (United States)

    Binder, Caitlin M; Bautista, April; Zaidlewicz, Marek; Krzemiński, Marek P; Oliver, Allen; Singaram, Bakthan


    (+)-Nopinone, prepared from naturally occurring (-)-beta-pinene, was converted to the two regioisomeric amino alcohols 3-MAP and 2-MAP in very good yield and excellent isomeric purity. Amino alcohol 3-MAP was synthesized by converting (+)-nopinone to the corresponding alpha-ketooxime. This was reduced to the primary amino alcohol and was converted to the morpholino group through a simple substitution reaction. 3-MAP was characterized by X-ray crystallography, which displayed the rigidity of the pinane framework. Amino alcohol 2-MAP was prepared from its trans isomer 2, which in turn was synthesized via hydroboration/oxidation of the morpholine enamine of (+)-nopinone. Two-dimensional NMR was used to characterize amino alcohol 2-MAP, and NOE was used to confirm its relative stereochemistry. These amino alcohols were employed as chiral auxiliaries in the addition of diethylzinc to benzaldehyde to obtain near-quantitative asymmetric induction in the products. The use of 3-MAP yielded (S)-phenylpropanol in 99% ee, and its regioisomer 2-MAP gave the opposite enantiomer, (R)-phenylpropanol, also in 99% ee. Other aromatic, aliphatic, and alpha,beta-unsaturated aldehydes were implemented in this method, affording secondary alcohols in high yield and enantiomeric excess. Amino alcohols 2-MAP and 3-MAP were also found to be useful in the dimethylzinc addition reaction, both catalyzing the addition to benzaldehyde with nearly quantitative ee. Regioisomeric amino alcohols 2-MAP and 3-MAP, even though they were prepared from one enantiomer of nopinone, provide antipodal enantiofacial selectivity in the dialkylzinc addition reaction. This circumvents the necessity to synthesize amino alcohols derived from (-)-nopinone, which in turn requires the unnatural (+)-beta-pinene. Possible mechanistic insights are offered to explain the dual stereoselectivity observed in the diethylzinc addition reaction involving regioisomeric, pseudo-enantiomeric amino alcohols 3-MAP and 2-MAP.

  18. Research progress in collector and auxiliary electrode for electrospinning process%静电纺丝接收装置和辅助电极的研究进展

    Institute of Scientific and Technical Information of China (English)

    卓坚锐; 严玉蓉; 李诗丞


    介绍了圆柱状转鼓、凝固池、旋转圆盘框架、相对圆环、平行电极等静电纺丝的接收装置;简述了刀锋型、平行、圆筒型及其改进的静电纺丝辅助电极;分析了接收装置和辅助电极对静电纺丝制备微/纳米纤维外貌观形貌和性能的影响;通过对静电纺丝接收装置的改进和增加辅助电极,可获得不同形态和结构的微/纳米纤维.%Some kinds of collectors for electrospinning process were introduced,such as cyclindric drum collector,coagulation bath collector,rotating disk collector,frame collector,dual ring collector,parallel electrode collector,tip collector.And the blade auxiliary electrode,parallel auxiliary electrode,cylindrical auxiliary electrode and copper ring auxiliary electrode were also introduced.And the effects of collectors and auxiliary electrodes on the appearance and properties of electrospun micro/nano fiber were also analyzed.The micro/nano fibers with different morphology and structure can be obtained by modifying electrospinning collectors and increasing auxiliary electrodes.

  19. The ‘abdominal circulatory pump’: an auxiliary heart during exercise?

    Directory of Open Access Journals (Sweden)

    Barbara eUva


    Full Text Available Apart from its role as a flow generator for ventilation the diaphragm has a circulatory role. The cyclical abdominal pressure variations from its contractions cause swings in venous return from the splanchnic venous circulation. During exercise the action of the abdominal muscles may enhance this circulatory function of the diaphragm. Eleven healthy subjects (25±7yr, 70±11kg, 1.78±0.1m, 3F performed plantar flexion exercise at ∼4 METs. Changes in body volume (ΔVb and trunk volume (ΔVtr were measured simultaneously by double body plethysmography. Volume of blood shifts between trunk and extremities (Vbs was determined non-invasively as ΔVtr-ΔVb. Three types of breathing were studied: spontaneous (SE, rib cage (RCE, voluntary emphasized inspiratory rib cage breathing and abdominal (ABE, voluntary active abdominal expiration breathing.. During SE and RCE blood was displaced from the extremities into the trunk (on average 0.16± 0.33L and 0.48±0.55L, p<0.05 SE vs RCE, while during ABE it was displaced from the trunk to the extremities (0.22±0.20L p<0.001, p<0.05 RCE and SE vs ABE respectively. At baseline, Vbs swings (maximum to minimum amplitude were bimodal and averaged 0.13±0.08L. During exercise, Vbs swings consistently increased (0.42±0.34L, 0.40±0.26L, 0.46±0.21L, for SE, RCE and ABE respectively, all p<0.01 vs. baseline. It follows that during leg exercise significant bi-directional blood shifting occurs between the trunk and the extremities. The dynamics and partitioning of these blood shifts strongly depend on the relative predominance of the action of the diaphragm, the rib cage and the abdominal muscles. Depending on the partitioning between respiratory muscles for the act of breathing, the distribution of blood between trunk and extremities can vary by up to 1 L. We conclude that during exercise the abdominal muscles and the diaphragm might play a role of an ‘auxiliary heart’.

  20. Looking for Help in the Translation Process--The Role of Auxiliary Texts in Translator Training and Translation Practice%Looking for Help in the Translation Process——The Role of Auxiliary Texts in Translator Training and Translation Practice

    Institute of Scientific and Technical Information of China (English)



    The article analyses translation from a pedagogical point of view, focussing on the necessity of"jumping over the culture hurdle" and using existing texts from the target culture as a tool in the translation process. Traditional dictionaries and grammars often do not provide sufficient or appropriate information to allow satisfactory solutions of quite a number of translation problems, especially where stylistic, textual and genre conventions or technolect and terminology are concerned. Therefore, drawing on the useful concept of intertextuality, the author suggests a variety of auxiliary texts which may be useful in source-text analysis and target-text production for both trainee and professional translators.

  1. 14 CFR 25.1103 - Induction system ducts and air duct systems. (United States)


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Induction system ducts and air duct systems....1103 Induction system ducts and air duct systems. (a) Each induction system duct upstream of the first... auxiliary power unit bleed air duct systems, no hazard may result if a duct failure occurs at any...

  2. Current Situation and Prospects of Mine Auxiliary Transportation%矿井辅助运输现状及展望

    Institute of Scientific and Technical Information of China (English)



      在我国经济飞速发展的时代,煤矿业也越加的加大了产量。矿井辅助运输可以分为两种:轨道辅助运输和无轨辅助运输。我国煤矿辅助运输起步的比较晚,到了七十年代的后期才有了关于这个方面的研究工作。在目前,我国先后研究成功了一些高效的辅助运输装备。比如柴油机胶套,无轨胶轮车等方式。在我们国家很多地方已经使用了这些新型研究出来的辅助运输设备。也在实践中产生了巨大的经济效益。但是从总体来看,设备的种类不多,并没有形成有效的系列产品,而辅助运输的设备质量不是很稳定。尤其是一些可靠性有待进一步加强研究。当代现状下,除了少数一些矿井,很多煤矿是没有实现矿井从地底到水平面的直接运输,都是分许多阶段完成的运输。每次从井下材料都是需要经过多次转载的。而且运输效率是特别低的,容易造成事故。不仅如此,而且使用的工作人员也比较多,占用的资源也是非常巨大。特别是在运输过程中,尤其一些关键性设备很容易出问题,维修费用也是比较高。%In the era of rapid development of China's economy, the mining industry production has been increasingly stepped up. Mine auxiliary transportation can be divided into two categories: track and trackless auxiliary transport. Auxiliary transportation of coal mine started relatively late, and the research work on this aspect began from late 1970s. At present, China has a number of successful researches on efficient auxiliary transport equipment, such as, diesel pouches, trackless vehicles and other means. Many places in our country have used these new auxiliary transport equipments, and they also have produced a huge economic benefits in practice. But on the whole, there are not enough equipment categories, and they did not form an effective series of products, and auxiliary transport

  3. 经皮椎弓根穿刺辅助装置开发和应用的可行性%Feasibility of the development and application of auxiliary device for percutaneous vertebral pedicle puncture

    Institute of Scientific and Technical Information of China (English)

    翟浩瀚; 陈艺; 龙浩; 陈玉书; 潘建超; 白波


    constructed as the origin. Coronary line and perpendicular lines crossing the origin were X-axis and Y-axis,respectively,thereby establishing two plane-coordinate systems.The azimuth of the intersection of the puncture line and the two planes were determined. The in-vitro coordinate system was constructed by the developed auxiliary device.The azimuth of the intersections of the puncture line and the plane-coordinate system in the auxiliary device was determined. The puncture can be guided and performed by using the determined intersections in the two plane-coordinate systems.The punctured vertebral pedicles were randomly divided into two groups where self-developed auxiliary device ( auxiliary device group) or free-hand puncture ( free-hand group) was used for percutaneous vertebral pedicle puncture.Both groups underwent puncture with placement of Kirschner wire under the assistance of a C-type arm image enhancing system. Successful puncture was confirmed by C-type arm X-ray.The elasped time of puncture and X-ray exposures between the two groups were compared.Results:The average elasped time of the puncture in the auxiliary device group and the free-hand group were 15.36±4.21 min vs 27.21±3.89 min,respectively,with statistical difference between the two groups (P<0.05).The number of X-ray exposures in the auxiliary device group and the free-hand group were 7 times / vertebra vs 16 times / vertebra, respectively (P<0.05).Conclusion:The self-developed auxiliary device for percutaneous vertebral pedicle puncture can effectively reduce the duration of puncture and exposures to C-arm X-ray.

  4. Linearization of Systems of Nonlinear Diffusion Equations

    Institute of Scientific and Technical Information of China (English)

    KANG Jing; QU Chang-Zheng


    We investigate the linearization of systems of n-component nonlinear diffusion equations; such systems have physical applications in soil science, mathematical biology and invariant curve flows. Equivalence transformations of their auxiliary systems are used to identify the systems that can be linearized. We also provide several examples of systems with two-component equations, and show how to linearize them by nonlocal mappings.

  5. The Role of Auxiliary Variables in Deterministic and Deterministic-Stochastic Spatial Models of Air Temperature in Poland (United States)

    Szymanowski, Mariusz; Kryza, Maciej


    Our study examines the role of auxiliary variables in the process of spatial modelling and mapping of climatological elements, with air temperature in Poland used as an example. The multivariable algorithms are the most frequently applied for spatialization of air temperature, and their results in many studies are proved to be better in comparison to those obtained by various one-dimensional techniques. In most of the previous studies, two main strategies were used to perform multidimensional spatial interpolation of air temperature. First, it was accepted that all variables significantly correlated with air temperature should be incorporated into the model. Second, it was assumed that the more spatial variation of air temperature was deterministically explained, the better was the quality of spatial interpolation. The main goal of the paper was to examine both above-mentioned assumptions. The analysis was performed using data from 250 meteorological stations and for 69 air temperature cases aggregated on different levels: from daily means to 10-year annual mean. Two cases were considered for detailed analysis. The set of potential auxiliary variables covered 11 environmental predictors of air temperature. Another purpose of the study was to compare the results of interpolation given by various multivariable methods using the same set of explanatory variables. Two regression models: multiple linear (MLR) and geographically weighted (GWR) method, as well as their extensions to the regression-kriging form, MLRK and GWRK, respectively, were examined. Stepwise regression was used to select variables for the individual models and the cross-validation method was used to validate the results with a special attention paid to statistically significant improvement of the model using the mean absolute error (MAE) criterion. The main results of this study led to rejection of both assumptions considered. Usually, including more than two or three of the most significantly


    Directory of Open Access Journals (Sweden)

    Jambulingam Subramani


    Full Text Available The present paper deals with a modified ratio estimator for estimation of population mean of the study variable when the population median of the auxiliary variable is known. The bias and mean squared error of the proposed estimator are derived and are compared with that of existing modified ratio estimators for certain known populations. Further we have also derived the conditions for which the proposed estimator performs better than the existing modified ratio estimators. From the numerical study it is also observed that the proposed modified ratio estimator performs better than the existing modified ratio estimators for certain known populations.

  7. Injection of auxiliary electrons for increasing the plasma density in highly charged and high intensity ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Odorici, F., E-mail:; Malferrari, L.; Montanari, A. [INFN—Bologna, Viale B. Pichat, 6/2, 40127 Bologna (Italy); Rizzoli, R. [INFN—Bologna, Viale B. Pichat, 6/2, 40127 Bologna (Italy); CNR–Istituto per la Microelettronica ed i Microsistemi, Via Gobetti 101, 40129 Bologna (Italy); Mascali, D.; Castro, G.; Celona, L.; Gammino, S.; Neri, L. [INFN–Laboratori Nazionali del Sud, Via S. Sofia 62, 95125 Catania (Italy)


    Different electron guns based on cold- or hot-cathode technologies have been developed since 2009 at INFN for operating within ECR plasma chambers as sources of auxiliary electrons, with the aim of boosting the source performances by means of a higher plasma lifetime and density. Their application to microwave discharge ion sources, where plasma is not confined, has required an improvement of the gun design, in order to “screen” the cathode from the plasma particles. Experimental tests carried out on a plasma reactor show a boost of the plasma density, ranging from 10% to 90% when the electron guns are used, as explained by plasma diffusion models.

  8. Energisation of Wind Turbine Transformers with an Auxiliary Generator in a Large Offshore Wind Farm Under Islanded Operation

    DEFF Research Database (Denmark)

    Arana Aristi, Iván; Hernandez, Alvaro; Thumm, Gerhard;


    The prospective inrush currents during the energization of wind turbine transformers in a large offshore wind farm during islanded operation were estimated by time-domain simulations covering different energizing scenarios. In this way, worst case procedures could be identified. The energization...... of the farm was carried out by an auxiliary diesel-driven synchronous generator placed on the offshore platform. The available information from all of the components and excitation control was implemented in PSCAD-EMTDC. The results from the simulations were compared with the capability curves and current...

  9. Note: Improving low-light-level image detection sensitivity with higher speed using auxiliary sinusoidal light signal (United States)

    Tang, Hongying; Yu, Zhengtao


    An improved active imaging method, which upgraded the detection sensitivity by applying an auxiliary sawtooth wave light signal, was reported. Nevertheless, such method sacrificed the imaging speed. To speed up imaging, a sinusoidal light signal is used instead and superposed with the undetectable low-light-level signal on the image sensor. After acquiring a superimposed image set in one sine wave cycle, an unbiased low-light-level image estimation is obtained by using least-square optimization. Through probabilistic analysis and experimental study, we demonstrate that the sinusoidal signal could improve the detection sensitivity 1/3 faster than the sawtooth wave signal.

  10. [Proposal for an auxiliary tool designed to reduce retake rates for lateral radiography of the knee joint]. (United States)

    Yasuda, Yu; Sato, Hisaya; Ohsawa, Miwa; Takahashi, Kanji; Noda, Chikara; Sai, Syogo; Sukezaki, Fumio; Nakazawa, Yasuo


    The reproducibility of lateral radiography of the knee joint in the lateral position is low because patient positioning can be easily affected by passive rotation of the knee joint. We calculated the correction angle of the femoral external rotation and the lower leg elevation and developed our own auxiliary tool for obtaining a lateral view image. We were able to obtain, in a single attempt, an image with misalignment of the condyle limited to less than 7 mm. Our tool also contributed to the reduction of the re-imaging rate, suggesting its usefulness in contributing to a lower re-imaging rate for lateral radiography of the knee joint.

  11. Injection of auxiliary electrons for increasing the plasma density in highly charged and high intensity ion sources (United States)

    Odorici, F.; Malferrari, L.; Montanari, A.; Rizzoli, R.; Mascali, D.; Castro, G.; Celona, L.; Gammino, S.; Neri, L.


    Different electron guns based on cold- or hot-cathode technologies have been developed since 2009 at INFN for operating within ECR plasma chambers as sources of auxiliary electrons, with the aim of boosting the source performances by means of a higher plasma lifetime and density. Their application to microwave discharge ion sources, where plasma is not confined, has required an improvement of the gun design, in order to "screen" the cathode from the plasma particles. Experimental tests carried out on a plasma reactor show a boost of the plasma density, ranging from 10% to 90% when the electron guns are used, as explained by plasma diffusion models.

  12. CTK-II & RTK: The CCD-cameras operated at the auxiliary telescopes of the University Observatory Jena (United States)

    Mugrauer, M.


    The Cassegrain-Teleskop-Kamera (CTK-II) and the Refraktor-Teleskop-Kamera (RTK) are two CCD-imagers which are operated at the 25 cm Cassegrain and 20 cm refractor auxiliary telescopes of the University Observatory Jena. This article describes the main characteristics of these instruments. The properties of the CCD-detectors, the astrometry, the image quality, and the detection limits of both CCD-cameras, as well as some results of ongoing observing projects, carried out with these instruments, are presented. Based on observations obtained with telescopes of the University Observatory Jena, which is operated by the Astrophysical Institute of the Friedrich-Schiller-University.

  13. Design of Auxiliary Power Supply for Multi-Axis Motion Platform of Linear Motor%直线电机多轴联动平台辅助电源设计

    Institute of Scientific and Technical Information of China (English)

    陈辉; 余海涛; 沈蛟骁; 王亚鲁; 徐鸣飞


    基于单端反激电路,设计了一款85~265VAC输入、24VDC输出的控制系统辅助电源.阐述了单端反激变换器的变压器设计过程,对反馈环路进行了小信号分析,并进行补偿网络优化.经制作样机测试,实验结果表明,该电源工作稳定,动态性能良好,整机效率可达89.4%,满足直线电机多轴联动平台辅助电源的要求.%Based on the single-ended flyback circuit, this paper designed an auxiliary power supply of control system with alternating cur-rent input voltage from 85 to 265 and 24 voltage of direct current output and expounded the transformer design process of single-ended lfyback converter, carrying out the small signal analysis of feedback loops and compensation network optimization. The prototype was produced and comprehensive experiments were conducted. The experimental results show that the power supply is stable and has good dynamic performance, whose overall efficiency reaches 89.4%, which can meet the auxiliary power supply requirements for the multi-axis motion platform of linear mo-tor.

  14. ISR vacuum system

    CERN Multimedia


    Some of the most important components of the vacuum system are shown. At the left, the rectangular box is a sputter-ion pump inside its bake-out oven. The assembly in the centre includes a sector valve, three roughing valves, a turbomolecular pump, a rotary backing pump and auxiliary equipment. At the right, the small elbow houses a Bayard-

  15. Excited state calculations using phaseless auxiliary-field quantum Monte Carlo: potential energy curves of low lying C2 singlet states

    CERN Document Server

    Purwanto, Wirawan; Krakauer, Henry


    We show that the recently developed phaseless auxiliary-field quantum Monte Carlo (AFQMC) method can be used to study excited states, providing an alternative to standard quantum chemistry methods. The phaseless AFQMC approach, whose computational cost scales as M^3-M^4 with system size M, has been shown to be among the most accurate many-body methods in ground state calculations. For excited states, prevention of collapse into the ground state and control of the Fermion sign/phase problem are accomplished by the approximate phaseless constraint with a trial wave function. Using the challenging C2 molecule as a test case, we calculate the potential energy curves of the ground and two low-lying singlet excited states. The trial wave function is obtained by truncating complete active space wave functions, with no further optimization. The phaseless AFQMC results using a small basis set are in good agreement with exact full configuration interaction calculations, while those using large basis sets are in good ag...

  16. The study of linear algebra in Matlab auxiliary experiment teaching%线性代数的Matlab辅助实验教学研究

    Institute of Scientific and Technical Information of China (English)



    Linear algebra is the science and engineering and economic management is an important professional foundation course. This paper introduces Matlab as auxiliary teaching tool of linear algebra, and designed three experiments, including matrix algebraic operation and characteristic parameter computing, matrix elementary transformation, reconciliation system of linear equations. In order to increase the teaching more interesting, to improve students' ability of mathematical model to solve practical problems.%线性代数也是高校理工科和经济管理等专业的一门重要基础课程,本文引入Matlab作为线性代数的辅助教学工具,并设计了3个实验,包括矩阵代数运算和特征参数运算、矩阵初等变换和解线性方程组,增加教学的趣味性,提高学生建立数学模型解决实际问题的能力。

  17. Analysing the Possible Ways for Short-Term Forcing Gas Turbine Engines in Auxiliary Power Unit

    Directory of Open Access Journals (Sweden)

    N. I. Trotskii


    applied only to small-sized and auxiliary gas turbines, operating as part of gas turbine power plants in vehicles, which comprise additional compressed air cylinders. Here are calculation results as a function of the engine power and forcing time on the amount of additional compressed air fed into the combustion chamber. The article shows that in feeding the additional compressed air in the amount of 15% of the airflow the engine power in the compressor is increased by 27%. It also describes the main implementation difficulties of this method.In conclusion, the article presents data on the considered methods for short-term forcing the GTE and shows the main difficulties in their implementation. It also comes to conclusion that the electro-generator design strength and characteristics restrict the limits of these short-term forcing methods.

  18. Optimal Control of Mechanical Systems

    Directory of Open Access Journals (Sweden)

    Vadim Azhmyakov


    Full Text Available In the present work, we consider a class of nonlinear optimal control problems, which can be called “optimal control problems in mechanics.” We deal with control systems whose dynamics can be described by a system of Euler-Lagrange or Hamilton equations. Using the variational structure of the solution of the corresponding boundary-value problems, we reduce the initial optimal control problem to an auxiliary problem of multiobjective programming. This technique makes it possible to apply some consistent numerical approximations of a multiobjective optimization problem to the initial optimal control problem. For solving the auxiliary problem, we propose an implementable numerical algorithm.

  19. Numerical Analysis of Magnetically Suspended Rotor in HTR-10 Helium Circulator Being Dropped into Auxiliary Bearings%HTR-10氦风机磁悬浮转子跌落在辐助轴承上的数值分析

    Institute of Scientific and Technical Information of China (English)

    赵泾雄; 杨国军; 李悦; 于溯源


    Active magnetic bearings (AMB) have been selected to support the rotor of primary helium circulator in commercial 10 Mega-Walt High Temperature Gas-cooled Reactor (HTR-10). In an AMB system, the auxiliary bearings are necessary to protect the AMB components in case of losing power. This paper performs the impact simulation of Magnetically Suspended Rotor in HTR-10 Helium Circulator being dropped into the auxiliary bearings using the finite element program ABAQUS. The dynamic response and the strain field of auxiliary bearings are analyzed. The results achieved by the numerical analysis are in agreement with the experiment results. Therefore, the feasibility of the design of auxiliary bearing and the possibility of using the AMB system in the HTR are proved.%辅助轴承是10 MW高温气冷堆(HTR-10)氦风机磁力轴承-转子系统中的辅助支承结构,其主要任务是在磁力轴承因失电而失效时支承高速转动的转子,是整个系统安全运行的保证.本研究以HTR-10磁力轴承氦风机实验台架中的辅助轴承为研究对象,使用ABAQUS有限元软件数值模拟转子跌落,分析滚动辅助轴承内圈与滚动体的变形及能量损耗特性,并与初步的实验结果进行比对,验证辅助轴承的可靠性,为磁力轴承在高温气冷堆核电厂中的应用提供重要的技术保障.

  20. Conceptual design and selection of a biodiesel fuel processor for a vehicle fuel cell auxiliary power unit (United States)

    Specchia, S.; Tillemans, F. W. A.; van den Oosterkamp, P. F.; Saracco, G.

    Within the European project BIOFEAT (biodiesel fuel processor for a fuel cell auxiliary power unit for a vehicle), a complete modular 10 kW e biodiesel fuel processor capable of feeding a PEMFC will be developed, built and tested to generate electricity for a vehicle auxiliary power unit (APU). Tail pipe emissions reduction, increased use of renewable fuels, increase of hydrogen-fuel economy and efficient supply of present and future APU for road vehicles are the main project goals. Biodiesel is the chosen feedstock because it is a completely natural and thus renewable fuel. Three fuel processing options were taken into account at a conceptual design level and compared for hydrogen production: (i) autothermal reformer (ATR) with high and low temperature shift (HTS/LTS) reactors; (ii) autothermal reformer (ATR) with a single medium temperature shift (MTS) reactor; (iii) thermal cracker (TC) with high and low temperature shift (HTS/LTS) reactors. Based on a number of simulations (with the AspenPlus® software), the best operating conditions were determined (steam-to-carbon and O 2/C ratios, operating temperatures and pressures) for each process alternative. The selection of the preferential fuel processing option was consequently carried out, based on a number of criteria (efficiency, complexity, compactness, safety, controllability, emissions, etc.); the ATR with both HTS and LTS reactors shows the most promising results, with a net electrical efficiency of 29% (LHV).